zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/usb/host/xhci-pci.c b/ap/os/linux/linux-3.4.x/drivers/usb/host/xhci-pci.c
new file mode 100644
index 0000000..710b2e9
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/usb/host/xhci-pci.c
@@ -0,0 +1,402 @@
+/*
+ * xHCI host controller driver PCI Bus Glue.
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include "xhci.h"
+
+/* Device for a quirk */
+#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
+#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400
+
+#define PCI_VENDOR_ID_ETRON 0x1b6f
+#define PCI_DEVICE_ID_ASROCK_P67 0x7023
+
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31
+#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f
+
+static const char hcd_name[] = "xhci_hcd";
+
+/* called after powerup, by probe or system-pm "wakeup" */
+static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
+{
+ /*
+ * TODO: Implement finding debug ports later.
+ * TODO: see if there are any quirks that need to be added to handle
+ * new extended capabilities.
+ */
+
+ /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
+ if (!pci_set_mwi(pdev))
+ xhci_dbg(xhci, "MWI active\n");
+
+ xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
+ return 0;
+}
+
+static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ /* Look for vendor-specific quirks */
+ if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
+ (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
+ pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
+ if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+ pdev->revision == 0x0) {
+ xhci->quirks |= XHCI_RESET_EP_QUIRK;
+ xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
+ " endpoint cmd after reset endpoint\n");
+ }
+ if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+ pdev->revision == 0x4) {
+ xhci->quirks |= XHCI_SLOW_SUSPEND;
+ xhci_dbg(xhci,
+ "QUIRK: Fresco Logic xHC revision %u"
+ "must be suspended extra slowly",
+ pdev->revision);
+ }
+ /* Fresco Logic confirms: all revisions of this chip do not
+ * support MSI, even though some of them claim to in their PCI
+ * capabilities.
+ */
+ xhci->quirks |= XHCI_BROKEN_MSI;
+ xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
+ "has broken MSI implementation\n",
+ pdev->revision);
+ xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+ }
+
+ if (pdev->vendor == PCI_VENDOR_ID_NEC)
+ xhci->quirks |= XHCI_NEC_HOST;
+
+ if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
+ xhci->quirks |= XHCI_AMD_0x96_HOST;
+
+ /* AMD PLL quirk */
+ if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
+ xhci->quirks |= XHCI_AMD_PLL_FIX;
+
+ if (pdev->vendor == PCI_VENDOR_ID_AMD)
+ xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+ xhci->quirks |= XHCI_AVOID_BEI;
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
+ xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
+ xhci->limit_active_eps = 64;
+ xhci->quirks |= XHCI_SW_BW_CHECKING;
+ /*
+ * PPT desktop boards DH77EB and DH77DF will power back on after
+ * a few seconds of being shutdown. The fix for this is to
+ * switch the ports from xHCI to EHCI on shutdown. We can't use
+ * DMI information to find those particular boards (since each
+ * vendor will change the board name), so we have to key off all
+ * PPT chipsets.
+ */
+ xhci->quirks |= XHCI_SPURIOUS_REBOOT;
+ }
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ (pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) {
+ xhci->quirks |= XHCI_PME_STUCK_QUIRK;
+ }
+ if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
+ pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
+ xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
+ xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+ }
+ if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
+ pdev->device == 0x0015)
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
+ if (pdev->vendor == PCI_VENDOR_ID_VIA)
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
+}
+
+/*
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct xhci_hcd *xhci)
+{
+ u32 val;
+ void __iomem *reg;
+
+ reg = (void __iomem *) xhci->cap_regs + 0x80a4;
+ val = readl(reg);
+ writel(val | BIT(28), reg);
+ readl(reg);
+}
+
+/* called during probe() after chip reset completes */
+static int xhci_pci_setup(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci;
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ int retval;
+
+ retval = xhci_gen_setup(hcd, xhci_pci_quirks);
+ if (retval)
+ return retval;
+
+ xhci = hcd_to_xhci(hcd);
+ if (!usb_hcd_is_primary_hcd(hcd))
+ return 0;
+
+ pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
+ xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
+
+ /* Find any debug ports */
+ retval = xhci_pci_reinit(xhci, pdev);
+ if (!retval)
+ return retval;
+
+ kfree(xhci);
+ return retval;
+}
+
+/*
+ * We need to register our own PCI probe function (instead of the USB core's
+ * function) in order to create a second roothub under xHCI.
+ */
+static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ int retval;
+ struct xhci_hcd *xhci;
+ struct hc_driver *driver;
+ struct usb_hcd *hcd;
+
+ driver = (struct hc_driver *)id->driver_data;
+ /* Register the USB 2.0 roothub.
+ * FIXME: USB core must know to register the USB 2.0 roothub first.
+ * This is sort of silly, because we could just set the HCD driver flags
+ * to say USB 2.0, but I'm not sure what the implications would be in
+ * the other parts of the HCD code.
+ */
+ retval = usb_hcd_pci_probe(dev, id);
+
+ if (retval)
+ return retval;
+
+ /* USB 2.0 roothub is stored in the PCI device now. */
+ hcd = dev_get_drvdata(&dev->dev);
+ xhci = hcd_to_xhci(hcd);
+ xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev,
+ pci_name(dev), hcd);
+ if (!xhci->shared_hcd) {
+ retval = -ENOMEM;
+ goto dealloc_usb2_hcd;
+ }
+
+ /* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset)
+ * is called by usb_add_hcd().
+ */
+ *((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;
+
+ retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
+ IRQF_SHARED);
+ if (retval)
+ goto put_usb3_hcd;
+ /* Roothub already marked as USB 3.0 speed */
+ return 0;
+
+put_usb3_hcd:
+ usb_put_hcd(xhci->shared_hcd);
+dealloc_usb2_hcd:
+ usb_hcd_pci_remove(dev);
+ return retval;
+}
+
+static void xhci_pci_remove(struct pci_dev *dev)
+{
+ struct xhci_hcd *xhci;
+
+ xhci = hcd_to_xhci(pci_get_drvdata(dev));
+ if (xhci->shared_hcd) {
+ usb_remove_hcd(xhci->shared_hcd);
+ usb_put_hcd(xhci->shared_hcd);
+ }
+ usb_hcd_pci_remove(dev);
+
+ /* Workaround for spurious wakeups at shutdown with HSW */
+ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+ pci_set_power_state(dev, PCI_D3hot);
+
+ kfree(xhci);
+}
+
+#ifdef CONFIG_PM
+static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ int retval = 0;
+
+ if (hcd->state != HC_STATE_SUSPENDED ||
+ xhci->shared_hcd->state != HC_STATE_SUSPENDED)
+ return -EINVAL;
+
+ if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+ xhci_pme_quirk(xhci);
+
+ retval = xhci_suspend(xhci, do_wakeup);
+
+ return retval;
+}
+
+static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ int retval = 0;
+
+ /* The BIOS on systems with the Intel Panther Point chipset may or may
+ * not support xHCI natively. That means that during system resume, it
+ * may switch the ports back to EHCI so that users can use their
+ * keyboard to select a kernel from GRUB after resume from hibernate.
+ *
+ * The BIOS is supposed to remember whether the OS had xHCI ports
+ * enabled before resume, and switch the ports back to xHCI when the
+ * BIOS/OS semaphore is written, but we all know we can't trust BIOS
+ * writers.
+ *
+ * Unconditionally switch the ports back to xHCI after a system resume.
+ * We can't tell whether the EHCI or xHCI controller will be resumed
+ * first, so we have to do the port switchover in both drivers. Writing
+ * a '1' to the port switchover registers should have no effect if the
+ * port was already switched over.
+ */
+ if (usb_is_intel_switchable_xhci(pdev))
+ usb_enable_xhci_ports(pdev);
+
+ if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+ xhci_pme_quirk(xhci);
+
+ retval = xhci_resume(xhci, hibernated);
+ return retval;
+}
+#endif /* CONFIG_PM */
+
+static const struct hc_driver xhci_pci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "xHCI Host Controller",
+ .hcd_priv_size = sizeof(struct xhci_hcd *),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = xhci_irq,
+ .flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = xhci_pci_setup,
+ .start = xhci_run,
+#ifdef CONFIG_PM
+ .pci_suspend = xhci_pci_suspend,
+ .pci_resume = xhci_pci_resume,
+#endif
+ .stop = xhci_stop,
+ .shutdown = xhci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = xhci_urb_enqueue,
+ .urb_dequeue = xhci_urb_dequeue,
+ .alloc_dev = xhci_alloc_dev,
+ .free_dev = xhci_free_dev,
+ .alloc_streams = xhci_alloc_streams,
+ .free_streams = xhci_free_streams,
+ .add_endpoint = xhci_add_endpoint,
+ .drop_endpoint = xhci_drop_endpoint,
+ .endpoint_reset = xhci_endpoint_reset,
+ .check_bandwidth = xhci_check_bandwidth,
+ .reset_bandwidth = xhci_reset_bandwidth,
+ .address_device = xhci_address_device,
+ .update_hub_device = xhci_update_hub_device,
+ .reset_device = xhci_discover_or_reset_device,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = xhci_get_frame,
+
+ /* Root hub support */
+ .hub_control = xhci_hub_control,
+ .hub_status_data = xhci_hub_status_data,
+ .bus_suspend = xhci_bus_suspend,
+ .bus_resume = xhci_bus_resume,
+ /*
+ * call back when device connected and addressed
+ */
+ .update_device = xhci_update_device,
+ .set_usb2_hw_lpm = xhci_set_usb2_hardware_lpm,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* PCI driver selection metadata; PCI hotplugging uses this */
+static const struct pci_device_id pci_ids[] = { {
+ /* handle any USB 3.0 xHCI controller */
+ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
+ .driver_data = (unsigned long) &xhci_pci_hc_driver,
+ },
+ { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver xhci_pci_driver = {
+ .name = (char *) hcd_name,
+ .id_table = pci_ids,
+
+ .probe = xhci_pci_probe,
+ .remove = xhci_pci_remove,
+ /* suspend and resume implemented later */
+
+ .shutdown = usb_hcd_pci_shutdown,
+#ifdef CONFIG_PM
+ .driver = {
+ .pm = &usb_hcd_pci_pm_ops
+ },
+#endif
+};
+
+int __init xhci_register_pci(void)
+{
+ return pci_register_driver(&xhci_pci_driver);
+}
+
+void xhci_unregister_pci(void)
+{
+ pci_unregister_driver(&xhci_pci_driver);
+}