zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/usb/serial/ch341.c b/ap/os/linux/linux-3.4.x/drivers/usb/serial/ch341.c
new file mode 100644
index 0000000..a45594a
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/usb/serial/ch341.c
@@ -0,0 +1,661 @@
+/*
+ * Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk>
+ * Copyright 2007, Werner Cornelius <werner@cornelius-consult.de>
+ * Copyright 2009, Boris Hajduk <boris@hajduk.org>
+ *
+ * ch341.c implements a serial port driver for the Winchiphead CH341.
+ *
+ * The CH341 device can be used to implement an RS232 asynchronous
+ * serial port, an IEEE-1284 parallel printer port or a memory-like
+ * interface. In all cases the CH341 supports an I2C interface as well.
+ * This driver only supports the asynchronous serial interface.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial.h>
+#include <asm/unaligned.h>
+
+#define DEFAULT_BAUD_RATE 9600
+#define DEFAULT_TIMEOUT 1000
+
+/* flags for IO-Bits */
+#define CH341_BIT_RTS (1 << 6)
+#define CH341_BIT_DTR (1 << 5)
+
+/******************************/
+/* interrupt pipe definitions */
+/******************************/
+/* always 4 interrupt bytes */
+/* first irq byte normally 0x08 */
+/* second irq byte base 0x7d + below */
+/* third irq byte base 0x94 + below */
+/* fourth irq byte normally 0xee */
+
+/* second interrupt byte */
+#define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */
+
+/* status returned in third interrupt answer byte, inverted in data
+ from irq */
+#define CH341_BIT_CTS 0x01
+#define CH341_BIT_DSR 0x02
+#define CH341_BIT_RI 0x04
+#define CH341_BIT_DCD 0x08
+#define CH341_BITS_MODEM_STAT 0x0f /* all bits */
+
+/*******************************/
+/* baudrate calculation factor */
+/*******************************/
+#define CH341_BAUDBASE_FACTOR 1532620800
+#define CH341_BAUDBASE_DIVMAX 3
+
+/* Break support - the information used to implement this was gleaned from
+ * the Net/FreeBSD uchcom.c driver by Takanori Watanabe. Domo arigato.
+ */
+
+#define CH341_REQ_WRITE_REG 0x9A
+#define CH341_REQ_READ_REG 0x95
+#define CH341_REG_BREAK1 0x05
+#define CH341_REG_BREAK2 0x18
+#define CH341_NBREAK_BITS_REG1 0x01
+#define CH341_NBREAK_BITS_REG2 0x40
+
+
+static bool debug;
+
+static const struct usb_device_id id_table[] = {
+ { USB_DEVICE(0x4348, 0x5523) },
+ { USB_DEVICE(0x1a86, 0x7523) },
+ { USB_DEVICE(0x1a86, 0x5523) },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct ch341_private {
+ spinlock_t lock; /* access lock */
+ unsigned baud_rate; /* set baud rate */
+ u8 line_control; /* set line control value RTS/DTR */
+ u8 line_status; /* active status of modem control inputs */
+ u8 multi_status_change; /* status changed multiple since last call */
+};
+
+static int ch341_control_out(struct usb_device *dev, u8 request,
+ u16 value, u16 index)
+{
+ int r;
+ dbg("ch341_control_out(%02x,%02x,%04x,%04x)", USB_DIR_OUT|0x40,
+ (int)request, (int)value, (int)index);
+
+ r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+ value, index, NULL, 0, DEFAULT_TIMEOUT);
+
+ return r;
+}
+
+static int ch341_control_in(struct usb_device *dev,
+ u8 request, u16 value, u16 index,
+ char *buf, unsigned bufsize)
+{
+ int r;
+ dbg("ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)", USB_DIR_IN|0x40,
+ (int)request, (int)value, (int)index, buf, (int)bufsize);
+
+ r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ value, index, buf, bufsize, DEFAULT_TIMEOUT);
+ return r;
+}
+
+static int ch341_set_baudrate(struct usb_device *dev,
+ struct ch341_private *priv)
+{
+ short a, b;
+ int r;
+ unsigned long factor;
+ short divisor;
+
+ dbg("ch341_set_baudrate(%d)", priv->baud_rate);
+
+ if (!priv->baud_rate)
+ return -EINVAL;
+ factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate);
+ divisor = CH341_BAUDBASE_DIVMAX;
+
+ while ((factor > 0xfff0) && divisor) {
+ factor >>= 3;
+ divisor--;
+ }
+
+ if (factor > 0xfff0)
+ return -EINVAL;
+
+ factor = 0x10000 - factor;
+ a = (factor & 0xff00) | divisor;
+ b = factor & 0xff;
+
+ r = ch341_control_out(dev, 0x9a, 0x1312, a);
+ if (!r)
+ r = ch341_control_out(dev, 0x9a, 0x0f2c, b);
+
+ return r;
+}
+
+static int ch341_set_handshake(struct usb_device *dev, u8 control)
+{
+ dbg("ch341_set_handshake(0x%02x)", control);
+ return ch341_control_out(dev, 0xa4, ~control, 0);
+}
+
+static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
+{
+ char *buffer;
+ int r;
+ const unsigned size = 8;
+ unsigned long flags;
+
+ dbg("ch341_get_status()");
+
+ buffer = kmalloc(size, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ r = ch341_control_in(dev, 0x95, 0x0706, 0, buffer, size);
+ if (r < 0)
+ goto out;
+
+ /* setup the private status if available */
+ if (r == 2) {
+ r = 0;
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
+ priv->multi_status_change = 0;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ } else
+ r = -EPROTO;
+
+out: kfree(buffer);
+ return r;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
+{
+ char *buffer;
+ int r;
+ const unsigned size = 8;
+
+ dbg("ch341_configure()");
+
+ buffer = kmalloc(size, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ /* expect two bytes 0x27 0x00 */
+ r = ch341_control_in(dev, 0x5f, 0, 0, buffer, size);
+ if (r < 0)
+ goto out;
+
+ r = ch341_control_out(dev, 0xa1, 0, 0);
+ if (r < 0)
+ goto out;
+
+ r = ch341_set_baudrate(dev, priv);
+ if (r < 0)
+ goto out;
+
+ /* expect two bytes 0x56 0x00 */
+ r = ch341_control_in(dev, 0x95, 0x2518, 0, buffer, size);
+ if (r < 0)
+ goto out;
+
+ r = ch341_control_out(dev, 0x9a, 0x2518, 0x0050);
+ if (r < 0)
+ goto out;
+
+ /* expect 0xff 0xee */
+ r = ch341_get_status(dev, priv);
+ if (r < 0)
+ goto out;
+
+ r = ch341_control_out(dev, 0xa1, 0x501f, 0xd90a);
+ if (r < 0)
+ goto out;
+
+ r = ch341_set_baudrate(dev, priv);
+ if (r < 0)
+ goto out;
+
+ r = ch341_set_handshake(dev, priv->line_control);
+ if (r < 0)
+ goto out;
+
+ /* expect 0x9f 0xee */
+ r = ch341_get_status(dev, priv);
+
+out: kfree(buffer);
+ return r;
+}
+
+/* allocate private data */
+static int ch341_attach(struct usb_serial *serial)
+{
+ struct ch341_private *priv;
+ int r;
+
+ dbg("ch341_attach()");
+
+ /* private data */
+ priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->lock);
+ priv->baud_rate = DEFAULT_BAUD_RATE;
+ priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
+
+ r = ch341_configure(serial->dev, priv);
+ if (r < 0)
+ goto error;
+
+ usb_set_serial_port_data(serial->port[0], priv);
+ return 0;
+
+error: kfree(priv);
+ return r;
+}
+
+static int ch341_carrier_raised(struct usb_serial_port *port)
+{
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ if (priv->line_status & CH341_BIT_DCD)
+ return 1;
+ return 0;
+}
+
+static void ch341_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+
+ dbg("%s - port %d", __func__, port->number);
+ /* drop DTR and RTS */
+ spin_lock_irqsave(&priv->lock, flags);
+ if (on)
+ priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR;
+ else
+ priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ ch341_set_handshake(port->serial->dev, priv->line_control);
+ wake_up_interruptible(&port->delta_msr_wait);
+}
+
+static void ch341_close(struct usb_serial_port *port)
+{
+ dbg("%s - port %d", __func__, port->number);
+
+ usb_serial_generic_close(port);
+ usb_kill_urb(port->interrupt_in_urb);
+}
+
+
+/* open this device, set default parameters */
+static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
+ int r;
+
+ dbg("ch341_open()");
+
+ priv->baud_rate = DEFAULT_BAUD_RATE;
+
+ r = ch341_configure(serial->dev, priv);
+ if (r)
+ goto out;
+
+ r = ch341_set_handshake(serial->dev, priv->line_control);
+ if (r)
+ goto out;
+
+ r = ch341_set_baudrate(serial->dev, priv);
+ if (r)
+ goto out;
+
+ dbg("%s - submitting interrupt urb", __func__);
+ r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+ if (r) {
+ dev_err(&port->dev, "%s - failed submitting interrupt urb,"
+ " error %d\n", __func__, r);
+ ch341_close(port);
+ goto out;
+ }
+
+ r = usb_serial_generic_open(tty, port);
+
+out: return r;
+}
+
+/* Old_termios contains the original termios settings and
+ * tty->termios contains the new setting to be used.
+ */
+static void ch341_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
+{
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ unsigned baud_rate;
+ unsigned long flags;
+
+ dbg("ch341_set_termios()");
+
+ baud_rate = tty_get_baud_rate(tty);
+
+ priv->baud_rate = baud_rate;
+
+ if (baud_rate) {
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ ch341_set_baudrate(port->serial->dev, priv);
+ } else {
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+
+ ch341_set_handshake(port->serial->dev, priv->line_control);
+
+ /* Unimplemented:
+ * (cflag & CSIZE) : data bits [5, 8]
+ * (cflag & PARENB) : parity {NONE, EVEN, ODD}
+ * (cflag & CSTOPB) : stop bits [1, 2]
+ */
+}
+
+static void ch341_break_ctl(struct tty_struct *tty, int break_state)
+{
+ const uint16_t ch341_break_reg =
+ CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8);
+ struct usb_serial_port *port = tty->driver_data;
+ int r;
+ uint16_t reg_contents;
+ uint8_t *break_reg;
+
+ dbg("%s()", __func__);
+
+ break_reg = kmalloc(2, GFP_KERNEL);
+ if (!break_reg) {
+ dev_err(&port->dev, "%s - kmalloc failed\n", __func__);
+ return;
+ }
+
+ r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG,
+ ch341_break_reg, 0, break_reg, 2);
+ if (r < 0) {
+ dev_err(&port->dev, "%s - USB control read error (%d)\n",
+ __func__, r);
+ goto out;
+ }
+ dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x",
+ __func__, break_reg[0], break_reg[1]);
+ if (break_state != 0) {
+ dbg("%s - Enter break state requested", __func__);
+ break_reg[0] &= ~CH341_NBREAK_BITS_REG1;
+ break_reg[1] &= ~CH341_NBREAK_BITS_REG2;
+ } else {
+ dbg("%s - Leave break state requested", __func__);
+ break_reg[0] |= CH341_NBREAK_BITS_REG1;
+ break_reg[1] |= CH341_NBREAK_BITS_REG2;
+ }
+ dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x",
+ __func__, break_reg[0], break_reg[1]);
+ reg_contents = get_unaligned_le16(break_reg);
+ r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
+ ch341_break_reg, reg_contents);
+ if (r < 0)
+ dev_err(&port->dev, "%s - USB control write error (%d)\n",
+ __func__, r);
+out:
+ kfree(break_reg);
+}
+
+static int ch341_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 control;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (set & TIOCM_RTS)
+ priv->line_control |= CH341_BIT_RTS;
+ if (set & TIOCM_DTR)
+ priv->line_control |= CH341_BIT_DTR;
+ if (clear & TIOCM_RTS)
+ priv->line_control &= ~CH341_BIT_RTS;
+ if (clear & TIOCM_DTR)
+ priv->line_control &= ~CH341_BIT_DTR;
+ control = priv->line_control;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return ch341_set_handshake(port->serial->dev, control);
+}
+
+static void ch341_read_int_callback(struct urb *urb)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+ unsigned char *data = urb->transfer_buffer;
+ unsigned int actual_length = urb->actual_length;
+ int status;
+
+ dbg("%s (%d)", __func__, port->number);
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d", __func__,
+ urb->status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d", __func__,
+ urb->status);
+ goto exit;
+ }
+
+ usb_serial_debug_data(debug, &port->dev, __func__,
+ urb->actual_length, urb->transfer_buffer);
+
+ if (actual_length >= 4) {
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 prev_line_status = priv->line_status;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT;
+ if ((data[1] & CH341_MULT_STAT))
+ priv->multi_status_change = 1;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if ((priv->line_status ^ prev_line_status) & CH341_BIT_DCD) {
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ if (tty)
+ usb_serial_handle_dcd_change(port, tty,
+ priv->line_status & CH341_BIT_DCD);
+ tty_kref_put(tty);
+ }
+
+ wake_up_interruptible(&port->delta_msr_wait);
+ }
+
+exit:
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status)
+ dev_err(&urb->dev->dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, status);
+}
+
+static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
+{
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 prevstatus;
+ u8 status;
+ u8 changed;
+ u8 multi_change = 0;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ prevstatus = priv->line_status;
+ priv->multi_status_change = 0;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ while (!multi_change) {
+ interruptible_sleep_on(&port->delta_msr_wait);
+ /* see if a signal did it */
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+
+ if (port->serial->disconnected)
+ return -EIO;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ status = priv->line_status;
+ multi_change = priv->multi_status_change;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ changed = prevstatus ^ status;
+
+ if (((arg & TIOCM_RNG) && (changed & CH341_BIT_RI)) ||
+ ((arg & TIOCM_DSR) && (changed & CH341_BIT_DSR)) ||
+ ((arg & TIOCM_CD) && (changed & CH341_BIT_DCD)) ||
+ ((arg & TIOCM_CTS) && (changed & CH341_BIT_CTS))) {
+ return 0;
+ }
+ prevstatus = status;
+ }
+
+ return 0;
+}
+
+static int ch341_ioctl(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
+
+ switch (cmd) {
+ case TIOCMIWAIT:
+ dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
+ return wait_modem_info(port, arg);
+
+ default:
+ dbg("%s not supported = 0x%04x", __func__, cmd);
+ break;
+ }
+
+ return -ENOIOCTLCMD;
+}
+
+static int ch341_tiocmget(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 mcr;
+ u8 status;
+ unsigned int result;
+
+ dbg("%s (%d)", __func__, port->number);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ mcr = priv->line_control;
+ status = priv->line_status;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ result = ((mcr & CH341_BIT_DTR) ? TIOCM_DTR : 0)
+ | ((mcr & CH341_BIT_RTS) ? TIOCM_RTS : 0)
+ | ((status & CH341_BIT_CTS) ? TIOCM_CTS : 0)
+ | ((status & CH341_BIT_DSR) ? TIOCM_DSR : 0)
+ | ((status & CH341_BIT_RI) ? TIOCM_RI : 0)
+ | ((status & CH341_BIT_DCD) ? TIOCM_CD : 0);
+
+ dbg("%s - result = %x", __func__, result);
+
+ return result;
+}
+
+
+static int ch341_reset_resume(struct usb_interface *intf)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_serial *serial = NULL;
+ struct ch341_private *priv;
+
+ serial = usb_get_intfdata(intf);
+ priv = usb_get_serial_port_data(serial->port[0]);
+
+ /*reconfigure ch341 serial port after bus-reset*/
+ ch341_configure(dev, priv);
+
+ usb_serial_resume(intf);
+
+ return 0;
+}
+
+static struct usb_driver ch341_driver = {
+ .name = "ch341",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .suspend = usb_serial_suspend,
+ .resume = usb_serial_resume,
+ .reset_resume = ch341_reset_resume,
+ .id_table = id_table,
+ .supports_autosuspend = 1,
+};
+
+static struct usb_serial_driver ch341_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ch341-uart",
+ },
+ .id_table = id_table,
+ .num_ports = 1,
+ .open = ch341_open,
+ .dtr_rts = ch341_dtr_rts,
+ .carrier_raised = ch341_carrier_raised,
+ .close = ch341_close,
+ .ioctl = ch341_ioctl,
+ .set_termios = ch341_set_termios,
+ .break_ctl = ch341_break_ctl,
+ .tiocmget = ch341_tiocmget,
+ .tiocmset = ch341_tiocmset,
+ .read_int_callback = ch341_read_int_callback,
+ .attach = ch341_attach,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+ &ch341_device, NULL
+};
+
+module_usb_serial_driver(ch341_driver, serial_drivers);
+
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");