zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/usb/serial/kl5kusb105.c b/ap/os/linux/linux-3.4.x/drivers/usb/serial/kl5kusb105.c
new file mode 100644
index 0000000..10f0540
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/usb/serial/kl5kusb105.c
@@ -0,0 +1,702 @@
+/*
+ * KLSI KL5KUSB105 chip RS232 converter driver
+ *
+ * Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
+ * Copyright (C) 2001 Utz-Uwe Haus <haus@uuhaus.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * All information about the device was acquired using SniffUSB ans snoopUSB
+ * on Windows98.
+ * It was written out of frustration with the PalmConnect USB Serial adapter
+ * sold by Palm Inc.
+ * Neither Palm, nor their contractor (MCCI) or their supplier (KLSI) provided
+ * information that was not already available.
+ *
+ * It seems that KLSI bought some silicon-design information from ScanLogic,
+ * whose SL11R processor is at the core of the KL5KUSB chipset from KLSI.
+ * KLSI has firmware available for their devices; it is probable that the
+ * firmware differs from that used by KLSI in their products. If you have an
+ * original KLSI device and can provide some information on it, I would be
+ * most interested in adding support for it here. If you have any information
+ * on the protocol used (or find errors in my reverse-engineered stuff), please
+ * let me know.
+ *
+ * The code was only tested with a PalmConnect USB adapter; if you
+ * are adventurous, try it with any KLSI-based device and let me know how it
+ * breaks so that I can fix it!
+ */
+
+/* TODO:
+ * check modem line signals
+ * implement handshaking or decide that we do not support it
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <asm/unaligned.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include "kl5kusb105.h"
+
+static bool debug;
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v0.4"
+#define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>, Johan Hovold <jhovold@gmail.com>"
+#define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver"
+
+
+/*
+ * Function prototypes
+ */
+static int klsi_105_startup(struct usb_serial *serial);
+static void klsi_105_release(struct usb_serial *serial);
+static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port);
+static void klsi_105_close(struct usb_serial_port *port);
+static void klsi_105_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old);
+static int klsi_105_tiocmget(struct tty_struct *tty);
+static int klsi_105_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear);
+static void klsi_105_process_read_urb(struct urb *urb);
+static int klsi_105_prepare_write_buffer(struct usb_serial_port *port,
+ void *dest, size_t size);
+
+/*
+ * All of the device info needed for the KLSI converters.
+ */
+static const struct usb_device_id id_table[] = {
+ { USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) },
+ { USB_DEVICE(KLSI_VID, KLSI_KL5KUSB105D_PID) },
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver kl5kusb105d_driver = {
+ .name = "kl5kusb105d",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+};
+
+static struct usb_serial_driver kl5kusb105d_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "kl5kusb105d",
+ },
+ .description = "KL5KUSB105D / PalmConnect",
+ .id_table = id_table,
+ .num_ports = 1,
+ .bulk_out_size = 64,
+ .open = klsi_105_open,
+ .close = klsi_105_close,
+ .set_termios = klsi_105_set_termios,
+ /*.break_ctl = klsi_105_break_ctl,*/
+ .tiocmget = klsi_105_tiocmget,
+ .tiocmset = klsi_105_tiocmset,
+ .attach = klsi_105_startup,
+ .release = klsi_105_release,
+ .throttle = usb_serial_generic_throttle,
+ .unthrottle = usb_serial_generic_unthrottle,
+ .process_read_urb = klsi_105_process_read_urb,
+ .prepare_write_buffer = klsi_105_prepare_write_buffer,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+ &kl5kusb105d_device, NULL
+};
+
+struct klsi_105_port_settings {
+ __u8 pktlen; /* always 5, it seems */
+ __u8 baudrate;
+ __u8 databits;
+ __u8 unknown1;
+ __u8 unknown2;
+} __attribute__ ((packed));
+
+struct klsi_105_private {
+ struct klsi_105_port_settings cfg;
+ struct ktermios termios;
+ unsigned long line_state; /* modem line settings */
+ spinlock_t lock;
+};
+
+
+/*
+ * Handle vendor specific USB requests
+ */
+
+
+#define KLSI_TIMEOUT 5000 /* default urb timeout */
+
+static int klsi_105_chg_port_settings(struct usb_serial_port *port,
+ struct klsi_105_port_settings *settings)
+{
+ int rc;
+
+ rc = usb_control_msg(port->serial->dev,
+ usb_sndctrlpipe(port->serial->dev, 0),
+ KL5KUSB105A_SIO_SET_DATA,
+ USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE,
+ 0, /* value */
+ 0, /* index */
+ settings,
+ sizeof(struct klsi_105_port_settings),
+ KLSI_TIMEOUT);
+ if (rc < 0)
+ dev_err(&port->dev,
+ "Change port settings failed (error = %d)\n", rc);
+ dev_info(&port->serial->dev->dev,
+ "%d byte block, baudrate %x, databits %d, u1 %d, u2 %d\n",
+ settings->pktlen, settings->baudrate, settings->databits,
+ settings->unknown1, settings->unknown2);
+ return rc;
+}
+
+/* translate a 16-bit status value from the device to linux's TIO bits */
+static unsigned long klsi_105_status2linestate(const __u16 status)
+{
+ unsigned long res = 0;
+
+ res = ((status & KL5KUSB105A_DSR) ? TIOCM_DSR : 0)
+ | ((status & KL5KUSB105A_CTS) ? TIOCM_CTS : 0)
+ ;
+
+ return res;
+}
+
+/*
+ * Read line control via vendor command and return result through
+ * *line_state_p
+ */
+/* It seems that the status buffer has always only 2 bytes length */
+#define KLSI_STATUSBUF_LEN 2
+static int klsi_105_get_line_state(struct usb_serial_port *port,
+ unsigned long *line_state_p)
+{
+ int rc;
+ u8 *status_buf;
+ __u16 status;
+
+ dev_info(&port->serial->dev->dev, "sending SIO Poll request\n");
+
+ status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL);
+ if (!status_buf) {
+ dev_err(&port->dev, "%s - out of memory for status buffer.\n",
+ __func__);
+ return -ENOMEM;
+ }
+ status_buf[0] = 0xff;
+ status_buf[1] = 0xff;
+ rc = usb_control_msg(port->serial->dev,
+ usb_rcvctrlpipe(port->serial->dev, 0),
+ KL5KUSB105A_SIO_POLL,
+ USB_TYPE_VENDOR | USB_DIR_IN,
+ 0, /* value */
+ 0, /* index */
+ status_buf, KLSI_STATUSBUF_LEN,
+ 10000
+ );
+ if (rc < 0)
+ dev_err(&port->dev, "Reading line status failed (error = %d)\n",
+ rc);
+ else {
+ status = get_unaligned_le16(status_buf);
+
+ dev_info(&port->serial->dev->dev, "read status %x %x",
+ status_buf[0], status_buf[1]);
+
+ *line_state_p = klsi_105_status2linestate(status);
+ }
+
+ kfree(status_buf);
+ return rc;
+}
+
+
+/*
+ * Driver's tty interface functions
+ */
+
+static int klsi_105_startup(struct usb_serial *serial)
+{
+ struct klsi_105_private *priv;
+ int i;
+
+ /* check if we support the product id (see keyspan.c)
+ * FIXME
+ */
+
+ /* allocate the private data structure */
+ for (i = 0; i < serial->num_ports; i++) {
+ priv = kmalloc(sizeof(struct klsi_105_private),
+ GFP_KERNEL);
+ if (!priv) {
+ dbg("%skmalloc for klsi_105_private failed.", __func__);
+ i--;
+ goto err_cleanup;
+ }
+ /* set initial values for control structures */
+ priv->cfg.pktlen = 5;
+ priv->cfg.baudrate = kl5kusb105a_sio_b9600;
+ priv->cfg.databits = kl5kusb105a_dtb_8;
+ priv->cfg.unknown1 = 0;
+ priv->cfg.unknown2 = 1;
+
+ priv->line_state = 0;
+
+ usb_set_serial_port_data(serial->port[i], priv);
+
+ spin_lock_init(&priv->lock);
+
+ /* priv->termios is left uninitialized until port opening */
+ init_waitqueue_head(&serial->port[i]->write_wait);
+ }
+
+ return 0;
+
+err_cleanup:
+ for (; i >= 0; i--) {
+ priv = usb_get_serial_port_data(serial->port[i]);
+ kfree(priv);
+ usb_set_serial_port_data(serial->port[i], NULL);
+ }
+ return -ENOMEM;
+}
+
+static void klsi_105_release(struct usb_serial *serial)
+{
+ int i;
+
+ dbg("%s", __func__);
+
+ for (i = 0; i < serial->num_ports; ++i)
+ kfree(usb_get_serial_port_data(serial->port[i]));
+}
+
+static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+ struct klsi_105_private *priv = usb_get_serial_port_data(port);
+ int retval = 0;
+ int rc;
+ int i;
+ unsigned long line_state;
+ struct klsi_105_port_settings *cfg;
+ unsigned long flags;
+
+ dbg("%s port %d", __func__, port->number);
+
+ /* Do a defined restart:
+ * Set up sane default baud rate and send the 'READ_ON'
+ * vendor command.
+ * FIXME: set modem line control (how?)
+ * Then read the modem line control and store values in
+ * priv->line_state.
+ */
+ cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
+ if (!cfg) {
+ dev_err(&port->dev, "%s - out of memory for config buffer.\n",
+ __func__);
+ return -ENOMEM;
+ }
+ cfg->pktlen = 5;
+ cfg->baudrate = kl5kusb105a_sio_b9600;
+ cfg->databits = kl5kusb105a_dtb_8;
+ cfg->unknown1 = 0;
+ cfg->unknown2 = 1;
+ klsi_105_chg_port_settings(port, cfg);
+
+ /* set up termios structure */
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->termios.c_iflag = tty->termios->c_iflag;
+ priv->termios.c_oflag = tty->termios->c_oflag;
+ priv->termios.c_cflag = tty->termios->c_cflag;
+ priv->termios.c_lflag = tty->termios->c_lflag;
+ for (i = 0; i < NCCS; i++)
+ priv->termios.c_cc[i] = tty->termios->c_cc[i];
+ priv->cfg.pktlen = cfg->pktlen;
+ priv->cfg.baudrate = cfg->baudrate;
+ priv->cfg.databits = cfg->databits;
+ priv->cfg.unknown1 = cfg->unknown1;
+ priv->cfg.unknown2 = cfg->unknown2;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ /* READ_ON and urb submission */
+ rc = usb_serial_generic_open(tty, port);
+ if (rc) {
+ retval = rc;
+ goto exit;
+ }
+
+ rc = usb_control_msg(port->serial->dev,
+ usb_sndctrlpipe(port->serial->dev, 0),
+ KL5KUSB105A_SIO_CONFIGURE,
+ USB_TYPE_VENDOR|USB_DIR_OUT|USB_RECIP_INTERFACE,
+ KL5KUSB105A_SIO_CONFIGURE_READ_ON,
+ 0, /* index */
+ NULL,
+ 0,
+ KLSI_TIMEOUT);
+ if (rc < 0) {
+ dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc);
+ retval = rc;
+ } else
+ dbg("%s - enabled reading", __func__);
+
+ rc = klsi_105_get_line_state(port, &line_state);
+ if (rc >= 0) {
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_state = line_state;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ dbg("%s - read line state 0x%lx", __func__, line_state);
+ retval = 0;
+ } else
+ retval = rc;
+
+exit:
+ kfree(cfg);
+ return retval;
+}
+
+static void klsi_105_close(struct usb_serial_port *port)
+{
+ int rc;
+
+ dbg("%s port %d", __func__, port->number);
+
+ mutex_lock(&port->serial->disc_mutex);
+ if (!port->serial->disconnected) {
+ /* send READ_OFF */
+ rc = usb_control_msg(port->serial->dev,
+ usb_sndctrlpipe(port->serial->dev, 0),
+ KL5KUSB105A_SIO_CONFIGURE,
+ USB_TYPE_VENDOR | USB_DIR_OUT,
+ KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
+ 0, /* index */
+ NULL, 0,
+ KLSI_TIMEOUT);
+ if (rc < 0)
+ dev_err(&port->dev,
+ "Disabling read failed (error = %d)\n", rc);
+ }
+ mutex_unlock(&port->serial->disc_mutex);
+
+ /* shutdown our bulk reads and writes */
+ usb_serial_generic_close(port);
+
+ /* wgg - do I need this? I think so. */
+ usb_kill_urb(port->interrupt_in_urb);
+}
+
+/* We need to write a complete 64-byte data block and encode the
+ * number actually sent in the first double-byte, LSB-order. That
+ * leaves at most 62 bytes of payload.
+ */
+#define KLSI_HDR_LEN 2
+static int klsi_105_prepare_write_buffer(struct usb_serial_port *port,
+ void *dest, size_t size)
+{
+ unsigned char *buf = dest;
+ int count;
+
+ count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size,
+ &port->lock);
+ put_unaligned_le16(count, buf);
+
+ return count + KLSI_HDR_LEN;
+}
+
+/* The data received is preceded by a length double-byte in LSB-first order.
+ */
+static void klsi_105_process_read_urb(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+ unsigned char *data = urb->transfer_buffer;
+ struct tty_struct *tty;
+ unsigned len;
+
+ /* empty urbs seem to happen, we ignore them */
+ if (!urb->actual_length)
+ return;
+
+ if (urb->actual_length <= KLSI_HDR_LEN) {
+ dbg("%s - malformed packet", __func__);
+ return;
+ }
+
+ tty = tty_port_tty_get(&port->port);
+ if (!tty)
+ return;
+
+ len = get_unaligned_le16(data);
+ if (len > urb->actual_length - KLSI_HDR_LEN) {
+ dbg("%s - packet length mismatch", __func__);
+ len = urb->actual_length - KLSI_HDR_LEN;
+ }
+
+ tty_insert_flip_string(tty, data + KLSI_HDR_LEN, len);
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+}
+
+static void klsi_105_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ struct ktermios *old_termios)
+{
+ struct klsi_105_private *priv = usb_get_serial_port_data(port);
+ unsigned int iflag = tty->termios->c_iflag;
+ unsigned int old_iflag = old_termios->c_iflag;
+ unsigned int cflag = tty->termios->c_cflag;
+ unsigned int old_cflag = old_termios->c_cflag;
+ struct klsi_105_port_settings *cfg;
+ unsigned long flags;
+ speed_t baud;
+
+ cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
+ if (!cfg) {
+ dev_err(&port->dev, "%s - out of memory for config buffer.\n",
+ __func__);
+ return;
+ }
+
+ /* lock while we are modifying the settings */
+ spin_lock_irqsave(&priv->lock, flags);
+
+ /*
+ * Update baud rate
+ */
+ baud = tty_get_baud_rate(tty);
+
+ if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
+ /* reassert DTR and (maybe) RTS on transition from B0 */
+ if ((old_cflag & CBAUD) == B0) {
+ dbg("%s: baud was B0", __func__);
+#if 0
+ priv->control_state |= TIOCM_DTR;
+ /* don't set RTS if using hardware flow control */
+ if (!(old_cflag & CRTSCTS))
+ priv->control_state |= TIOCM_RTS;
+ mct_u232_set_modem_ctrl(serial, priv->control_state);
+#endif
+ }
+ }
+ switch (baud) {
+ case 0: /* handled below */
+ break;
+ case 1200:
+ priv->cfg.baudrate = kl5kusb105a_sio_b1200;
+ break;
+ case 2400:
+ priv->cfg.baudrate = kl5kusb105a_sio_b2400;
+ break;
+ case 4800:
+ priv->cfg.baudrate = kl5kusb105a_sio_b4800;
+ break;
+ case 9600:
+ priv->cfg.baudrate = kl5kusb105a_sio_b9600;
+ break;
+ case 19200:
+ priv->cfg.baudrate = kl5kusb105a_sio_b19200;
+ break;
+ case 38400:
+ priv->cfg.baudrate = kl5kusb105a_sio_b38400;
+ break;
+ case 57600:
+ priv->cfg.baudrate = kl5kusb105a_sio_b57600;
+ break;
+ case 115200:
+ priv->cfg.baudrate = kl5kusb105a_sio_b115200;
+ break;
+ default:
+ dbg("KLSI USB->Serial converter:"
+ " unsupported baudrate request, using default of 9600");
+ priv->cfg.baudrate = kl5kusb105a_sio_b9600;
+ baud = 9600;
+ break;
+ }
+ if ((cflag & CBAUD) == B0) {
+ dbg("%s: baud is B0", __func__);
+ /* Drop RTS and DTR */
+ /* maybe this should be simulated by sending read
+ * disable and read enable messages?
+ */
+ ;
+#if 0
+ priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
+ mct_u232_set_modem_ctrl(serial, priv->control_state);
+#endif
+ }
+ tty_encode_baud_rate(tty, baud, baud);
+
+ if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
+ /* set the number of data bits */
+ switch (cflag & CSIZE) {
+ case CS5:
+ dbg("%s - 5 bits/byte not supported", __func__);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ goto err;
+ case CS6:
+ dbg("%s - 6 bits/byte not supported", __func__);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ goto err;
+ case CS7:
+ priv->cfg.databits = kl5kusb105a_dtb_7;
+ break;
+ case CS8:
+ priv->cfg.databits = kl5kusb105a_dtb_8;
+ break;
+ default:
+ dev_err(&port->dev,
+ "CSIZE was not CS5-CS8, using default of 8\n");
+ priv->cfg.databits = kl5kusb105a_dtb_8;
+ break;
+ }
+ }
+
+ /*
+ * Update line control register (LCR)
+ */
+ if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))
+ || (cflag & CSTOPB) != (old_cflag & CSTOPB)) {
+ /* Not currently supported */
+ tty->termios->c_cflag &= ~(PARENB|PARODD|CSTOPB);
+#if 0
+ priv->last_lcr = 0;
+
+ /* set the parity */
+ if (cflag & PARENB)
+ priv->last_lcr |= (cflag & PARODD) ?
+ MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN;
+ else
+ priv->last_lcr |= MCT_U232_PARITY_NONE;
+
+ /* set the number of stop bits */
+ priv->last_lcr |= (cflag & CSTOPB) ?
+ MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;
+
+ mct_u232_set_line_ctrl(serial, priv->last_lcr);
+#endif
+ ;
+ }
+ /*
+ * Set flow control: well, I do not really now how to handle DTR/RTS.
+ * Just do what we have seen with SniffUSB on Win98.
+ */
+ if ((iflag & IXOFF) != (old_iflag & IXOFF)
+ || (iflag & IXON) != (old_iflag & IXON)
+ || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
+ /* Not currently supported */
+ tty->termios->c_cflag &= ~CRTSCTS;
+ /* Drop DTR/RTS if no flow control otherwise assert */
+#if 0
+ if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS))
+ priv->control_state |= TIOCM_DTR | TIOCM_RTS;
+ else
+ priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
+ mct_u232_set_modem_ctrl(serial, priv->control_state);
+#endif
+ ;
+ }
+ memcpy(cfg, &priv->cfg, sizeof(*cfg));
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ /* now commit changes to device */
+ klsi_105_chg_port_settings(port, cfg);
+err:
+ kfree(cfg);
+}
+
+#if 0
+static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct usb_serial *serial = port->serial;
+ struct mct_u232_private *priv =
+ (struct mct_u232_private *)port->private;
+ unsigned char lcr = priv->last_lcr;
+
+ dbg("%sstate=%d", __func__, break_state);
+
+ /* LOCKING */
+ if (break_state)
+ lcr |= MCT_U232_SET_BREAK;
+
+ mct_u232_set_line_ctrl(serial, lcr);
+}
+#endif
+
+static int klsi_105_tiocmget(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct klsi_105_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ int rc;
+ unsigned long line_state;
+ dbg("%s - request, just guessing", __func__);
+
+ rc = klsi_105_get_line_state(port, &line_state);
+ if (rc < 0) {
+ dev_err(&port->dev,
+ "Reading line control failed (error = %d)\n", rc);
+ /* better return value? EAGAIN? */
+ return rc;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_state = line_state;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ dbg("%s - read line state 0x%lx", __func__, line_state);
+ return (int)line_state;
+}
+
+static int klsi_105_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ int retval = -EINVAL;
+
+ dbg("%s", __func__);
+
+/* if this ever gets implemented, it should be done something like this:
+ struct usb_serial *serial = port->serial;
+ struct klsi_105_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ int control;
+
+ spin_lock_irqsave (&priv->lock, flags);
+ if (set & TIOCM_RTS)
+ priv->control_state |= TIOCM_RTS;
+ if (set & TIOCM_DTR)
+ priv->control_state |= TIOCM_DTR;
+ if (clear & TIOCM_RTS)
+ priv->control_state &= ~TIOCM_RTS;
+ if (clear & TIOCM_DTR)
+ priv->control_state &= ~TIOCM_DTR;
+ control = priv->control_state;
+ spin_unlock_irqrestore (&priv->lock, flags);
+ retval = mct_u232_set_modem_ctrl(serial, control);
+*/
+ return retval;
+}
+
+module_usb_serial_driver(kl5kusb105d_driver, serial_drivers);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "enable extensive debugging messages");