zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/sound/soc/codecs/tlv320aic26.c b/ap/os/linux/linux-3.4.x/sound/soc/codecs/tlv320aic26.c
new file mode 100644
index 0000000..802064b
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/sound/soc/codecs/tlv320aic26.c
@@ -0,0 +1,458 @@
+/*
+ * Texas Instruments TLV320AIC26 low power audio CODEC
+ * ALSA SoC CODEC driver
+ *
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+
+#include "tlv320aic26.h"
+
+MODULE_DESCRIPTION("ASoC TLV320AIC26 codec driver");
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_LICENSE("GPL");
+
+/* AIC26 driver private data */
+struct aic26 {
+ struct spi_device *spi;
+ struct snd_soc_codec codec;
+ int master;
+ int datfm;
+ int mclk;
+
+ /* Keyclick parameters */
+ int keyclick_amplitude;
+ int keyclick_freq;
+ int keyclick_len;
+};
+
+/* ---------------------------------------------------------------------
+ * Register access routines
+ */
+static unsigned int aic26_reg_read(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec);
+ u16 *cache = codec->reg_cache;
+ u16 cmd, value;
+ u8 buffer[2];
+ int rc;
+
+ if (reg >= AIC26_NUM_REGS) {
+ WARN_ON_ONCE(1);
+ return 0;
+ }
+
+ /* Do SPI transfer; first 16bits are command; remaining is
+ * register contents */
+ cmd = AIC26_READ_COMMAND_WORD(reg);
+ buffer[0] = (cmd >> 8) & 0xff;
+ buffer[1] = cmd & 0xff;
+ rc = spi_write_then_read(aic26->spi, buffer, 2, buffer, 2);
+ if (rc) {
+ dev_err(&aic26->spi->dev, "AIC26 reg read error\n");
+ return -EIO;
+ }
+ value = (buffer[0] << 8) | buffer[1];
+
+ /* Update the cache before returning with the value */
+ cache[reg] = value;
+ return value;
+}
+
+static unsigned int aic26_reg_read_cache(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *cache = codec->reg_cache;
+
+ if (reg >= AIC26_NUM_REGS) {
+ WARN_ON_ONCE(1);
+ return 0;
+ }
+
+ return cache[reg];
+}
+
+static int aic26_reg_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec);
+ u16 *cache = codec->reg_cache;
+ u16 cmd;
+ u8 buffer[4];
+ int rc;
+
+ if (reg >= AIC26_NUM_REGS) {
+ WARN_ON_ONCE(1);
+ return -EINVAL;
+ }
+
+ /* Do SPI transfer; first 16bits are command; remaining is data
+ * to write into register */
+ cmd = AIC26_WRITE_COMMAND_WORD(reg);
+ buffer[0] = (cmd >> 8) & 0xff;
+ buffer[1] = cmd & 0xff;
+ buffer[2] = value >> 8;
+ buffer[3] = value;
+ rc = spi_write(aic26->spi, buffer, 4);
+ if (rc) {
+ dev_err(&aic26->spi->dev, "AIC26 reg read error\n");
+ return -EIO;
+ }
+
+ /* update cache before returning */
+ cache[reg] = value;
+ return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * Digital Audio Interface Operations
+ */
+static int aic26_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_codec *codec = rtd->codec;
+ struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec);
+ int fsref, divisor, wlen, pval, jval, dval, qval;
+ u16 reg;
+
+ dev_dbg(&aic26->spi->dev, "aic26_hw_params(substream=%p, params=%p)\n",
+ substream, params);
+ dev_dbg(&aic26->spi->dev, "rate=%i format=%i\n", params_rate(params),
+ params_format(params));
+
+ switch (params_rate(params)) {
+ case 8000: fsref = 48000; divisor = AIC26_DIV_6; break;
+ case 11025: fsref = 44100; divisor = AIC26_DIV_4; break;
+ case 12000: fsref = 48000; divisor = AIC26_DIV_4; break;
+ case 16000: fsref = 48000; divisor = AIC26_DIV_3; break;
+ case 22050: fsref = 44100; divisor = AIC26_DIV_2; break;
+ case 24000: fsref = 48000; divisor = AIC26_DIV_2; break;
+ case 32000: fsref = 48000; divisor = AIC26_DIV_1_5; break;
+ case 44100: fsref = 44100; divisor = AIC26_DIV_1; break;
+ case 48000: fsref = 48000; divisor = AIC26_DIV_1; break;
+ default:
+ dev_dbg(&aic26->spi->dev, "bad rate\n"); return -EINVAL;
+ }
+
+ /* select data word length */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S8: wlen = AIC26_WLEN_16; break;
+ case SNDRV_PCM_FORMAT_S16_BE: wlen = AIC26_WLEN_16; break;
+ case SNDRV_PCM_FORMAT_S24_BE: wlen = AIC26_WLEN_24; break;
+ case SNDRV_PCM_FORMAT_S32_BE: wlen = AIC26_WLEN_32; break;
+ default:
+ dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL;
+ }
+
+ /**
+ * Configure PLL
+ * fsref = (mclk * PLLM) / 2048
+ * where PLLM = J.DDDD (DDDD register ranges from 0 to 9999, decimal)
+ */
+ pval = 1;
+ /* compute J portion of multiplier */
+ jval = fsref / (aic26->mclk / 2048);
+ /* compute fractional DDDD component of multiplier */
+ dval = fsref - (jval * (aic26->mclk / 2048));
+ dval = (10000 * dval) / (aic26->mclk / 2048);
+ dev_dbg(&aic26->spi->dev, "Setting PLLM to %d.%04d\n", jval, dval);
+ qval = 0;
+ reg = 0x8000 | qval << 11 | pval << 8 | jval << 2;
+ aic26_reg_write(codec, AIC26_REG_PLL_PROG1, reg);
+ reg = dval << 2;
+ aic26_reg_write(codec, AIC26_REG_PLL_PROG2, reg);
+
+ /* Audio Control 3 (master mode, fsref rate) */
+ reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL3);
+ reg &= ~0xf800;
+ if (aic26->master)
+ reg |= 0x0800;
+ if (fsref == 48000)
+ reg |= 0x2000;
+ aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL3, reg);
+
+ /* Audio Control 1 (FSref divisor) */
+ reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL1);
+ reg &= ~0x0fff;
+ reg |= wlen | aic26->datfm | (divisor << 3) | divisor;
+ aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL1, reg);
+
+ return 0;
+}
+
+/**
+ * aic26_mute - Mute control to reduce noise when changing audio format
+ */
+static int aic26_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec);
+ u16 reg = aic26_reg_read_cache(codec, AIC26_REG_DAC_GAIN);
+
+ dev_dbg(&aic26->spi->dev, "aic26_mute(dai=%p, mute=%i)\n",
+ dai, mute);
+
+ if (mute)
+ reg |= 0x8080;
+ else
+ reg &= ~0x8080;
+ aic26_reg_write(codec, AIC26_REG_DAC_GAIN, reg);
+
+ return 0;
+}
+
+static int aic26_set_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec);
+
+ dev_dbg(&aic26->spi->dev, "aic26_set_sysclk(dai=%p, clk_id==%i,"
+ " freq=%i, dir=%i)\n",
+ codec_dai, clk_id, freq, dir);
+
+ /* MCLK needs to fall between 2MHz and 50 MHz */
+ if ((freq < 2000000) || (freq > 50000000))
+ return -EINVAL;
+
+ aic26->mclk = freq;
+ return 0;
+}
+
+static int aic26_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec);
+
+ dev_dbg(&aic26->spi->dev, "aic26_set_fmt(dai=%p, fmt==%i)\n",
+ codec_dai, fmt);
+
+ /* set master/slave audio interface */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM: aic26->master = 1; break;
+ case SND_SOC_DAIFMT_CBS_CFS: aic26->master = 0; break;
+ default:
+ dev_dbg(&aic26->spi->dev, "bad master\n"); return -EINVAL;
+ }
+
+ /* interface format */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S: aic26->datfm = AIC26_DATFM_I2S; break;
+ case SND_SOC_DAIFMT_DSP_A: aic26->datfm = AIC26_DATFM_DSP; break;
+ case SND_SOC_DAIFMT_RIGHT_J: aic26->datfm = AIC26_DATFM_RIGHTJ; break;
+ case SND_SOC_DAIFMT_LEFT_J: aic26->datfm = AIC26_DATFM_LEFTJ; break;
+ default:
+ dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * Digital Audio Interface Definition
+ */
+#define AIC26_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
+ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
+ SNDRV_PCM_RATE_48000)
+#define AIC26_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |\
+ SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE)
+
+static const struct snd_soc_dai_ops aic26_dai_ops = {
+ .hw_params = aic26_hw_params,
+ .digital_mute = aic26_mute,
+ .set_sysclk = aic26_set_sysclk,
+ .set_fmt = aic26_set_fmt,
+};
+
+static struct snd_soc_dai_driver aic26_dai = {
+ .name = "tlv320aic26-hifi",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = AIC26_RATES,
+ .formats = AIC26_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = AIC26_RATES,
+ .formats = AIC26_FORMATS,
+ },
+ .ops = &aic26_dai_ops,
+};
+
+/* ---------------------------------------------------------------------
+ * ALSA controls
+ */
+static const char *aic26_capture_src_text[] = {"Mic", "Aux"};
+static const struct soc_enum aic26_capture_src_enum =
+ SOC_ENUM_SINGLE(AIC26_REG_AUDIO_CTRL1, 12, 2, aic26_capture_src_text);
+
+static const struct snd_kcontrol_new aic26_snd_controls[] = {
+ /* Output */
+ SOC_DOUBLE("PCM Playback Volume", AIC26_REG_DAC_GAIN, 8, 0, 0x7f, 1),
+ SOC_DOUBLE("PCM Playback Switch", AIC26_REG_DAC_GAIN, 15, 7, 1, 1),
+ SOC_SINGLE("PCM Capture Volume", AIC26_REG_ADC_GAIN, 8, 0x7f, 0),
+ SOC_SINGLE("PCM Capture Mute", AIC26_REG_ADC_GAIN, 15, 1, 1),
+ SOC_SINGLE("Keyclick activate", AIC26_REG_AUDIO_CTRL2, 15, 0x1, 0),
+ SOC_SINGLE("Keyclick amplitude", AIC26_REG_AUDIO_CTRL2, 12, 0x7, 0),
+ SOC_SINGLE("Keyclick frequency", AIC26_REG_AUDIO_CTRL2, 8, 0x7, 0),
+ SOC_SINGLE("Keyclick period", AIC26_REG_AUDIO_CTRL2, 4, 0xf, 0),
+ SOC_ENUM("Capture Source", aic26_capture_src_enum),
+};
+
+/* ---------------------------------------------------------------------
+ * SPI device portion of driver: sysfs files for debugging
+ */
+
+static ssize_t aic26_keyclick_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct aic26 *aic26 = dev_get_drvdata(dev);
+ int val, amp, freq, len;
+
+ val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2);
+ amp = (val >> 12) & 0x7;
+ freq = (125 << ((val >> 8) & 0x7)) >> 1;
+ len = 2 * (1 + ((val >> 4) & 0xf));
+
+ return sprintf(buf, "amp=%x freq=%iHz len=%iclks\n", amp, freq, len);
+}
+
+/* Any write to the keyclick attribute will trigger the keyclick event */
+static ssize_t aic26_keyclick_set(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct aic26 *aic26 = dev_get_drvdata(dev);
+ int val;
+
+ val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2);
+ val |= 0x8000;
+ aic26_reg_write(&aic26->codec, AIC26_REG_AUDIO_CTRL2, val);
+
+ return count;
+}
+
+static DEVICE_ATTR(keyclick, 0644, aic26_keyclick_show, aic26_keyclick_set);
+
+/* ---------------------------------------------------------------------
+ * SoC CODEC portion of driver: probe and release routines
+ */
+static int aic26_probe(struct snd_soc_codec *codec)
+{
+ int ret, err, i, reg;
+
+ dev_info(codec->dev, "Probing AIC26 SoC CODEC driver\n");
+
+ /* Reset the codec to power on defaults */
+ aic26_reg_write(codec, AIC26_REG_RESET, 0xBB00);
+
+ /* Power up CODEC */
+ aic26_reg_write(codec, AIC26_REG_POWER_CTRL, 0);
+
+ /* Audio Control 3 (master mode, fsref rate) */
+ reg = aic26_reg_read(codec, AIC26_REG_AUDIO_CTRL3);
+ reg &= ~0xf800;
+ reg |= 0x0800; /* set master mode */
+ aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL3, reg);
+
+ /* Fill register cache */
+ for (i = 0; i < codec->driver->reg_cache_size; i++)
+ aic26_reg_read(codec, i);
+
+ /* Register the sysfs files for debugging */
+ /* Create SysFS files */
+ ret = device_create_file(codec->dev, &dev_attr_keyclick);
+ if (ret)
+ dev_info(codec->dev, "error creating sysfs files\n");
+
+ /* register controls */
+ dev_dbg(codec->dev, "Registering controls\n");
+ err = snd_soc_add_codec_controls(codec, aic26_snd_controls,
+ ARRAY_SIZE(aic26_snd_controls));
+ WARN_ON(err < 0);
+
+ return 0;
+}
+
+static struct snd_soc_codec_driver aic26_soc_codec_dev = {
+ .probe = aic26_probe,
+ .read = aic26_reg_read,
+ .write = aic26_reg_write,
+ .reg_cache_size = AIC26_NUM_REGS,
+ .reg_word_size = sizeof(u16),
+};
+
+/* ---------------------------------------------------------------------
+ * SPI device portion of driver: probe and release routines and SPI
+ * driver registration.
+ */
+static int aic26_spi_probe(struct spi_device *spi)
+{
+ struct aic26 *aic26;
+ int ret;
+
+ dev_dbg(&spi->dev, "probing tlv320aic26 spi device\n");
+
+ /* Allocate driver data */
+ aic26 = devm_kzalloc(&spi->dev, sizeof *aic26, GFP_KERNEL);
+ if (!aic26)
+ return -ENOMEM;
+
+ /* Initialize the driver data */
+ aic26->spi = spi;
+ dev_set_drvdata(&spi->dev, aic26);
+ aic26->master = 1;
+
+ ret = snd_soc_register_codec(&spi->dev,
+ &aic26_soc_codec_dev, &aic26_dai, 1);
+ return ret;
+}
+
+static int aic26_spi_remove(struct spi_device *spi)
+{
+ snd_soc_unregister_codec(&spi->dev);
+ return 0;
+}
+
+static struct spi_driver aic26_spi = {
+ .driver = {
+ .name = "tlv320aic26-codec",
+ .owner = THIS_MODULE,
+ },
+ .probe = aic26_spi_probe,
+ .remove = aic26_spi_remove,
+};
+
+static int __init aic26_init(void)
+{
+ return spi_register_driver(&aic26_spi);
+}
+module_init(aic26_init);
+
+static void __exit aic26_exit(void)
+{
+ spi_unregister_driver(&aic26_spi);
+}
+module_exit(aic26_exit);