diff --git a/boot/common/src/uboot/include/netdev.h b/boot/common/src/uboot/include/netdev.h
new file mode 100644
index 0000000..96c7b9b
--- /dev/null
+++ b/boot/common/src/uboot/include/netdev.h
@@ -0,0 +1,188 @@
+/*
+ * (C) Copyright 2008
+ * Benjamin Warren, biggerbadderben@gmail.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * netdev.h - definitions an prototypes for network devices
+ */
+
+#ifndef _NETDEV_H_
+#define _NETDEV_H_
+
+/*
+ * Board and CPU-specific initialization functions
+ * board_eth_init() has highest priority.  cpu_eth_init() only
+ * gets called if board_eth_init() isn't instantiated or fails.
+ * Return values:
+ *      0: success
+ *     -1: failure
+ */
+
+int board_eth_init(bd_t *bis);
+int cpu_eth_init(bd_t *bis);
+
+/* Driver initialization prototypes */
+int altera_tse_initialize(u8 dev_num, int mac_base,
+			  int sgdma_rx_base, int sgdma_tx_base);
+int at91emac_register(bd_t *bis, unsigned long iobase);
+int au1x00_enet_initialize(bd_t*);
+int ax88180_initialize(bd_t *bis);
+int bfin_EMAC_initialize(bd_t *bis);
+int cs8900_initialize(u8 dev_num, int base_addr);
+int davinci_emac_initialize(void);
+int dc21x4x_initialize(bd_t *bis);
+int designware_initialize(u32 id, ulong base_addr, u32 phy_addr);
+int dm9000_initialize(bd_t *bis);
+int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
+int e1000_initialize(bd_t *bis);
+int eepro100_initialize(bd_t *bis);
+int enc28j60_initialize(unsigned int bus, unsigned int cs,
+	unsigned int max_hz, unsigned int mode);
+int ep93xx_eth_initialize(u8 dev_num, int base_addr);
+int eth_3com_initialize (bd_t * bis);
+int ethoc_initialize(u8 dev_num, int base_addr);
+int fec_initialize (bd_t *bis);
+int fecmxc_initialize (bd_t *bis);
+int fecmxc_initialize(bd_t *bis);
+int ftgmac100_initialize(bd_t *bits);
+int ftmac100_initialize(bd_t *bits);
+int greth_initialize(bd_t *bis);
+void gt6426x_eth_initialize(bd_t *bis);
+int inca_switch_initialize(bd_t *bis);
+int ks8695_eth_initialize(void);
+int lan91c96_initialize(u8 dev_num, int base_addr);
+int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
+int mcdmafec_initialize(bd_t *bis);
+int mcffec_initialize(bd_t *bis);
+int mpc512x_fec_initialize(bd_t *bis);
+int mpc5xxx_fec_initialize(bd_t *bis);
+int mpc8220_fec_initialize(bd_t *bis);
+int mpc82xx_scc_enet_initialize(bd_t *bis);
+int mvgbe_initialize(bd_t *bis);
+int natsemi_initialize(bd_t *bis);
+int npe_initialize(bd_t *bis);
+int ns8382x_initialize(bd_t *bis);
+int pcnet_initialize(bd_t *bis);
+int plb2800_eth_initialize(bd_t *bis);
+int ppc_4xx_eth_initialize (bd_t *bis);
+int rtl8139_initialize(bd_t *bis);
+int rtl8169_initialize(bd_t *bis);
+int scc_initialize(bd_t *bis);
+int sh_eth_initialize(bd_t *bis);
+int skge_initialize(bd_t *bis);
+int smc91111_initialize(u8 dev_num, int base_addr);
+int smc911x_initialize(u8 dev_num, int base_addr);
+int tsi108_eth_initialize(bd_t *bis);
+int uec_standard_init(bd_t *bis);
+int uli526x_initialize(bd_t *bis);
+int xilinx_emaclite_initialize (bd_t *bis, int base_addr);
+
+/* Boards with PCI network controllers can call this from their board_eth_init()
+ * function to initialize whatever's on board.
+ * Return value is total # of devices found */
+
+static inline int pci_eth_init(bd_t *bis)
+{
+	int num = 0;
+
+#ifdef CONFIG_PCI
+
+#ifdef CONFIG_EEPRO100
+	num += eepro100_initialize(bis);
+#endif
+#ifdef CONFIG_TULIP
+	num += dc21x4x_initialize(bis);
+#endif
+#ifdef CONFIG_E1000
+	num += e1000_initialize(bis);
+#endif
+#ifdef CONFIG_PCNET
+	num += pcnet_initialize(bis);
+#endif
+#ifdef CONFIG_NATSEMI
+	num += natsemi_initialize(bis);
+#endif
+#ifdef CONFIG_NS8382X
+	num += ns8382x_initialize(bis);
+#endif
+#if defined(CONFIG_RTL8139)
+	num += rtl8139_initialize(bis);
+#endif
+#if defined(CONFIG_RTL8169)
+	num += rtl8169_initialize(bis);
+#endif
+#if defined(CONFIG_ULI526X)
+	num += uli526x_initialize(bis);
+#endif
+
+#endif  /* CONFIG_PCI */
+	return num;
+}
+
+/*
+ * Boards with mv88e61xx switch can use this by defining
+ * CONFIG_MV88E61XX_SWITCH in respective board configheader file
+ * the stuct and enums here are used to specify switch configuration params
+ */
+#if defined(CONFIG_MV88E61XX_SWITCH)
+enum mv88e61xx_cfg_vlan {
+	MV88E61XX_VLANCFG_DEFAULT,
+	MV88E61XX_VLANCFG_ROUTER
+};
+
+enum mv88e61xx_cfg_mdip {
+	MV88E61XX_MDIP_NOCHANGE,
+	MV88E61XX_MDIP_REVERSE
+};
+
+enum mv88e61xx_cfg_ledinit {
+	MV88E61XX_LED_INIT_DIS,
+	MV88E61XX_LED_INIT_EN
+};
+
+enum mv88e61xx_cfg_rgmiid {
+	MV88E61XX_RGMII_DELAY_DIS,
+	MV88E61XX_RGMII_DELAY_EN
+};
+
+enum mv88e61xx_cfg_prtstt {
+	MV88E61XX_PORTSTT_DISABLED,
+	MV88E61XX_PORTSTT_BLOCKING,
+	MV88E61XX_PORTSTT_LEARNING,
+	MV88E61XX_PORTSTT_FORWARDING
+};
+
+struct mv88e61xx_config {
+	char *name;
+	enum mv88e61xx_cfg_vlan vlancfg;
+	enum mv88e61xx_cfg_rgmiid rgmii_delay;
+	enum mv88e61xx_cfg_prtstt portstate;
+	enum mv88e61xx_cfg_ledinit led_init;
+	enum mv88e61xx_cfg_mdip mdip;
+	u32 ports_enabled;
+	u8 cpuport;
+};
+
+int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
+#endif /* CONFIG_MV88E61XX_SWITCH */
+
+#endif /* _NETDEV_H_ */