blob: a45594a0d8909636735500fa1a75cff2e72f19c9 [file] [log] [blame]
yuezonghe824eb0c2024-06-27 02:32:26 -07001/*
2 * Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk>
3 * Copyright 2007, Werner Cornelius <werner@cornelius-consult.de>
4 * Copyright 2009, Boris Hajduk <boris@hajduk.org>
5 *
6 * ch341.c implements a serial port driver for the Winchiphead CH341.
7 *
8 * The CH341 device can be used to implement an RS232 asynchronous
9 * serial port, an IEEE-1284 parallel printer port or a memory-like
10 * interface. In all cases the CH341 supports an I2C interface as well.
11 * This driver only supports the asynchronous serial interface.
12 *
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License version
15 * 2 as published by the Free Software Foundation.
16 */
17
18#include <linux/kernel.h>
19#include <linux/init.h>
20#include <linux/tty.h>
21#include <linux/module.h>
22#include <linux/slab.h>
23#include <linux/usb.h>
24#include <linux/usb/serial.h>
25#include <linux/serial.h>
26#include <asm/unaligned.h>
27
28#define DEFAULT_BAUD_RATE 9600
29#define DEFAULT_TIMEOUT 1000
30
31/* flags for IO-Bits */
32#define CH341_BIT_RTS (1 << 6)
33#define CH341_BIT_DTR (1 << 5)
34
35/******************************/
36/* interrupt pipe definitions */
37/******************************/
38/* always 4 interrupt bytes */
39/* first irq byte normally 0x08 */
40/* second irq byte base 0x7d + below */
41/* third irq byte base 0x94 + below */
42/* fourth irq byte normally 0xee */
43
44/* second interrupt byte */
45#define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */
46
47/* status returned in third interrupt answer byte, inverted in data
48 from irq */
49#define CH341_BIT_CTS 0x01
50#define CH341_BIT_DSR 0x02
51#define CH341_BIT_RI 0x04
52#define CH341_BIT_DCD 0x08
53#define CH341_BITS_MODEM_STAT 0x0f /* all bits */
54
55/*******************************/
56/* baudrate calculation factor */
57/*******************************/
58#define CH341_BAUDBASE_FACTOR 1532620800
59#define CH341_BAUDBASE_DIVMAX 3
60
61/* Break support - the information used to implement this was gleaned from
62 * the Net/FreeBSD uchcom.c driver by Takanori Watanabe. Domo arigato.
63 */
64
65#define CH341_REQ_WRITE_REG 0x9A
66#define CH341_REQ_READ_REG 0x95
67#define CH341_REG_BREAK1 0x05
68#define CH341_REG_BREAK2 0x18
69#define CH341_NBREAK_BITS_REG1 0x01
70#define CH341_NBREAK_BITS_REG2 0x40
71
72
73static bool debug;
74
75static const struct usb_device_id id_table[] = {
76 { USB_DEVICE(0x4348, 0x5523) },
77 { USB_DEVICE(0x1a86, 0x7523) },
78 { USB_DEVICE(0x1a86, 0x5523) },
79 { },
80};
81MODULE_DEVICE_TABLE(usb, id_table);
82
83struct ch341_private {
84 spinlock_t lock; /* access lock */
85 unsigned baud_rate; /* set baud rate */
86 u8 line_control; /* set line control value RTS/DTR */
87 u8 line_status; /* active status of modem control inputs */
88 u8 multi_status_change; /* status changed multiple since last call */
89};
90
91static int ch341_control_out(struct usb_device *dev, u8 request,
92 u16 value, u16 index)
93{
94 int r;
95 dbg("ch341_control_out(%02x,%02x,%04x,%04x)", USB_DIR_OUT|0x40,
96 (int)request, (int)value, (int)index);
97
98 r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
99 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
100 value, index, NULL, 0, DEFAULT_TIMEOUT);
101
102 return r;
103}
104
105static int ch341_control_in(struct usb_device *dev,
106 u8 request, u16 value, u16 index,
107 char *buf, unsigned bufsize)
108{
109 int r;
110 dbg("ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)", USB_DIR_IN|0x40,
111 (int)request, (int)value, (int)index, buf, (int)bufsize);
112
113 r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
114 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
115 value, index, buf, bufsize, DEFAULT_TIMEOUT);
116 return r;
117}
118
119static int ch341_set_baudrate(struct usb_device *dev,
120 struct ch341_private *priv)
121{
122 short a, b;
123 int r;
124 unsigned long factor;
125 short divisor;
126
127 dbg("ch341_set_baudrate(%d)", priv->baud_rate);
128
129 if (!priv->baud_rate)
130 return -EINVAL;
131 factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate);
132 divisor = CH341_BAUDBASE_DIVMAX;
133
134 while ((factor > 0xfff0) && divisor) {
135 factor >>= 3;
136 divisor--;
137 }
138
139 if (factor > 0xfff0)
140 return -EINVAL;
141
142 factor = 0x10000 - factor;
143 a = (factor & 0xff00) | divisor;
144 b = factor & 0xff;
145
146 r = ch341_control_out(dev, 0x9a, 0x1312, a);
147 if (!r)
148 r = ch341_control_out(dev, 0x9a, 0x0f2c, b);
149
150 return r;
151}
152
153static int ch341_set_handshake(struct usb_device *dev, u8 control)
154{
155 dbg("ch341_set_handshake(0x%02x)", control);
156 return ch341_control_out(dev, 0xa4, ~control, 0);
157}
158
159static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
160{
161 char *buffer;
162 int r;
163 const unsigned size = 8;
164 unsigned long flags;
165
166 dbg("ch341_get_status()");
167
168 buffer = kmalloc(size, GFP_KERNEL);
169 if (!buffer)
170 return -ENOMEM;
171
172 r = ch341_control_in(dev, 0x95, 0x0706, 0, buffer, size);
173 if (r < 0)
174 goto out;
175
176 /* setup the private status if available */
177 if (r == 2) {
178 r = 0;
179 spin_lock_irqsave(&priv->lock, flags);
180 priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
181 priv->multi_status_change = 0;
182 spin_unlock_irqrestore(&priv->lock, flags);
183 } else
184 r = -EPROTO;
185
186out: kfree(buffer);
187 return r;
188}
189
190/* -------------------------------------------------------------------------- */
191
192static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
193{
194 char *buffer;
195 int r;
196 const unsigned size = 8;
197
198 dbg("ch341_configure()");
199
200 buffer = kmalloc(size, GFP_KERNEL);
201 if (!buffer)
202 return -ENOMEM;
203
204 /* expect two bytes 0x27 0x00 */
205 r = ch341_control_in(dev, 0x5f, 0, 0, buffer, size);
206 if (r < 0)
207 goto out;
208
209 r = ch341_control_out(dev, 0xa1, 0, 0);
210 if (r < 0)
211 goto out;
212
213 r = ch341_set_baudrate(dev, priv);
214 if (r < 0)
215 goto out;
216
217 /* expect two bytes 0x56 0x00 */
218 r = ch341_control_in(dev, 0x95, 0x2518, 0, buffer, size);
219 if (r < 0)
220 goto out;
221
222 r = ch341_control_out(dev, 0x9a, 0x2518, 0x0050);
223 if (r < 0)
224 goto out;
225
226 /* expect 0xff 0xee */
227 r = ch341_get_status(dev, priv);
228 if (r < 0)
229 goto out;
230
231 r = ch341_control_out(dev, 0xa1, 0x501f, 0xd90a);
232 if (r < 0)
233 goto out;
234
235 r = ch341_set_baudrate(dev, priv);
236 if (r < 0)
237 goto out;
238
239 r = ch341_set_handshake(dev, priv->line_control);
240 if (r < 0)
241 goto out;
242
243 /* expect 0x9f 0xee */
244 r = ch341_get_status(dev, priv);
245
246out: kfree(buffer);
247 return r;
248}
249
250/* allocate private data */
251static int ch341_attach(struct usb_serial *serial)
252{
253 struct ch341_private *priv;
254 int r;
255
256 dbg("ch341_attach()");
257
258 /* private data */
259 priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL);
260 if (!priv)
261 return -ENOMEM;
262
263 spin_lock_init(&priv->lock);
264 priv->baud_rate = DEFAULT_BAUD_RATE;
265 priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
266
267 r = ch341_configure(serial->dev, priv);
268 if (r < 0)
269 goto error;
270
271 usb_set_serial_port_data(serial->port[0], priv);
272 return 0;
273
274error: kfree(priv);
275 return r;
276}
277
278static int ch341_carrier_raised(struct usb_serial_port *port)
279{
280 struct ch341_private *priv = usb_get_serial_port_data(port);
281 if (priv->line_status & CH341_BIT_DCD)
282 return 1;
283 return 0;
284}
285
286static void ch341_dtr_rts(struct usb_serial_port *port, int on)
287{
288 struct ch341_private *priv = usb_get_serial_port_data(port);
289 unsigned long flags;
290
291 dbg("%s - port %d", __func__, port->number);
292 /* drop DTR and RTS */
293 spin_lock_irqsave(&priv->lock, flags);
294 if (on)
295 priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR;
296 else
297 priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
298 spin_unlock_irqrestore(&priv->lock, flags);
299 ch341_set_handshake(port->serial->dev, priv->line_control);
300 wake_up_interruptible(&port->delta_msr_wait);
301}
302
303static void ch341_close(struct usb_serial_port *port)
304{
305 dbg("%s - port %d", __func__, port->number);
306
307 usb_serial_generic_close(port);
308 usb_kill_urb(port->interrupt_in_urb);
309}
310
311
312/* open this device, set default parameters */
313static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
314{
315 struct usb_serial *serial = port->serial;
316 struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
317 int r;
318
319 dbg("ch341_open()");
320
321 priv->baud_rate = DEFAULT_BAUD_RATE;
322
323 r = ch341_configure(serial->dev, priv);
324 if (r)
325 goto out;
326
327 r = ch341_set_handshake(serial->dev, priv->line_control);
328 if (r)
329 goto out;
330
331 r = ch341_set_baudrate(serial->dev, priv);
332 if (r)
333 goto out;
334
335 dbg("%s - submitting interrupt urb", __func__);
336 r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
337 if (r) {
338 dev_err(&port->dev, "%s - failed submitting interrupt urb,"
339 " error %d\n", __func__, r);
340 ch341_close(port);
341 goto out;
342 }
343
344 r = usb_serial_generic_open(tty, port);
345
346out: return r;
347}
348
349/* Old_termios contains the original termios settings and
350 * tty->termios contains the new setting to be used.
351 */
352static void ch341_set_termios(struct tty_struct *tty,
353 struct usb_serial_port *port, struct ktermios *old_termios)
354{
355 struct ch341_private *priv = usb_get_serial_port_data(port);
356 unsigned baud_rate;
357 unsigned long flags;
358
359 dbg("ch341_set_termios()");
360
361 baud_rate = tty_get_baud_rate(tty);
362
363 priv->baud_rate = baud_rate;
364
365 if (baud_rate) {
366 spin_lock_irqsave(&priv->lock, flags);
367 priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
368 spin_unlock_irqrestore(&priv->lock, flags);
369 ch341_set_baudrate(port->serial->dev, priv);
370 } else {
371 spin_lock_irqsave(&priv->lock, flags);
372 priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
373 spin_unlock_irqrestore(&priv->lock, flags);
374 }
375
376 ch341_set_handshake(port->serial->dev, priv->line_control);
377
378 /* Unimplemented:
379 * (cflag & CSIZE) : data bits [5, 8]
380 * (cflag & PARENB) : parity {NONE, EVEN, ODD}
381 * (cflag & CSTOPB) : stop bits [1, 2]
382 */
383}
384
385static void ch341_break_ctl(struct tty_struct *tty, int break_state)
386{
387 const uint16_t ch341_break_reg =
388 CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8);
389 struct usb_serial_port *port = tty->driver_data;
390 int r;
391 uint16_t reg_contents;
392 uint8_t *break_reg;
393
394 dbg("%s()", __func__);
395
396 break_reg = kmalloc(2, GFP_KERNEL);
397 if (!break_reg) {
398 dev_err(&port->dev, "%s - kmalloc failed\n", __func__);
399 return;
400 }
401
402 r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG,
403 ch341_break_reg, 0, break_reg, 2);
404 if (r < 0) {
405 dev_err(&port->dev, "%s - USB control read error (%d)\n",
406 __func__, r);
407 goto out;
408 }
409 dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x",
410 __func__, break_reg[0], break_reg[1]);
411 if (break_state != 0) {
412 dbg("%s - Enter break state requested", __func__);
413 break_reg[0] &= ~CH341_NBREAK_BITS_REG1;
414 break_reg[1] &= ~CH341_NBREAK_BITS_REG2;
415 } else {
416 dbg("%s - Leave break state requested", __func__);
417 break_reg[0] |= CH341_NBREAK_BITS_REG1;
418 break_reg[1] |= CH341_NBREAK_BITS_REG2;
419 }
420 dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x",
421 __func__, break_reg[0], break_reg[1]);
422 reg_contents = get_unaligned_le16(break_reg);
423 r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
424 ch341_break_reg, reg_contents);
425 if (r < 0)
426 dev_err(&port->dev, "%s - USB control write error (%d)\n",
427 __func__, r);
428out:
429 kfree(break_reg);
430}
431
432static int ch341_tiocmset(struct tty_struct *tty,
433 unsigned int set, unsigned int clear)
434{
435 struct usb_serial_port *port = tty->driver_data;
436 struct ch341_private *priv = usb_get_serial_port_data(port);
437 unsigned long flags;
438 u8 control;
439
440 spin_lock_irqsave(&priv->lock, flags);
441 if (set & TIOCM_RTS)
442 priv->line_control |= CH341_BIT_RTS;
443 if (set & TIOCM_DTR)
444 priv->line_control |= CH341_BIT_DTR;
445 if (clear & TIOCM_RTS)
446 priv->line_control &= ~CH341_BIT_RTS;
447 if (clear & TIOCM_DTR)
448 priv->line_control &= ~CH341_BIT_DTR;
449 control = priv->line_control;
450 spin_unlock_irqrestore(&priv->lock, flags);
451
452 return ch341_set_handshake(port->serial->dev, control);
453}
454
455static void ch341_read_int_callback(struct urb *urb)
456{
457 struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
458 unsigned char *data = urb->transfer_buffer;
459 unsigned int actual_length = urb->actual_length;
460 int status;
461
462 dbg("%s (%d)", __func__, port->number);
463
464 switch (urb->status) {
465 case 0:
466 /* success */
467 break;
468 case -ECONNRESET:
469 case -ENOENT:
470 case -ESHUTDOWN:
471 /* this urb is terminated, clean up */
472 dbg("%s - urb shutting down with status: %d", __func__,
473 urb->status);
474 return;
475 default:
476 dbg("%s - nonzero urb status received: %d", __func__,
477 urb->status);
478 goto exit;
479 }
480
481 usb_serial_debug_data(debug, &port->dev, __func__,
482 urb->actual_length, urb->transfer_buffer);
483
484 if (actual_length >= 4) {
485 struct ch341_private *priv = usb_get_serial_port_data(port);
486 unsigned long flags;
487 u8 prev_line_status = priv->line_status;
488
489 spin_lock_irqsave(&priv->lock, flags);
490 priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT;
491 if ((data[1] & CH341_MULT_STAT))
492 priv->multi_status_change = 1;
493 spin_unlock_irqrestore(&priv->lock, flags);
494
495 if ((priv->line_status ^ prev_line_status) & CH341_BIT_DCD) {
496 struct tty_struct *tty = tty_port_tty_get(&port->port);
497 if (tty)
498 usb_serial_handle_dcd_change(port, tty,
499 priv->line_status & CH341_BIT_DCD);
500 tty_kref_put(tty);
501 }
502
503 wake_up_interruptible(&port->delta_msr_wait);
504 }
505
506exit:
507 status = usb_submit_urb(urb, GFP_ATOMIC);
508 if (status)
509 dev_err(&urb->dev->dev,
510 "%s - usb_submit_urb failed with result %d\n",
511 __func__, status);
512}
513
514static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
515{
516 struct ch341_private *priv = usb_get_serial_port_data(port);
517 unsigned long flags;
518 u8 prevstatus;
519 u8 status;
520 u8 changed;
521 u8 multi_change = 0;
522
523 spin_lock_irqsave(&priv->lock, flags);
524 prevstatus = priv->line_status;
525 priv->multi_status_change = 0;
526 spin_unlock_irqrestore(&priv->lock, flags);
527
528 while (!multi_change) {
529 interruptible_sleep_on(&port->delta_msr_wait);
530 /* see if a signal did it */
531 if (signal_pending(current))
532 return -ERESTARTSYS;
533
534 if (port->serial->disconnected)
535 return -EIO;
536
537 spin_lock_irqsave(&priv->lock, flags);
538 status = priv->line_status;
539 multi_change = priv->multi_status_change;
540 spin_unlock_irqrestore(&priv->lock, flags);
541
542 changed = prevstatus ^ status;
543
544 if (((arg & TIOCM_RNG) && (changed & CH341_BIT_RI)) ||
545 ((arg & TIOCM_DSR) && (changed & CH341_BIT_DSR)) ||
546 ((arg & TIOCM_CD) && (changed & CH341_BIT_DCD)) ||
547 ((arg & TIOCM_CTS) && (changed & CH341_BIT_CTS))) {
548 return 0;
549 }
550 prevstatus = status;
551 }
552
553 return 0;
554}
555
556static int ch341_ioctl(struct tty_struct *tty,
557 unsigned int cmd, unsigned long arg)
558{
559 struct usb_serial_port *port = tty->driver_data;
560 dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
561
562 switch (cmd) {
563 case TIOCMIWAIT:
564 dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
565 return wait_modem_info(port, arg);
566
567 default:
568 dbg("%s not supported = 0x%04x", __func__, cmd);
569 break;
570 }
571
572 return -ENOIOCTLCMD;
573}
574
575static int ch341_tiocmget(struct tty_struct *tty)
576{
577 struct usb_serial_port *port = tty->driver_data;
578 struct ch341_private *priv = usb_get_serial_port_data(port);
579 unsigned long flags;
580 u8 mcr;
581 u8 status;
582 unsigned int result;
583
584 dbg("%s (%d)", __func__, port->number);
585
586 spin_lock_irqsave(&priv->lock, flags);
587 mcr = priv->line_control;
588 status = priv->line_status;
589 spin_unlock_irqrestore(&priv->lock, flags);
590
591 result = ((mcr & CH341_BIT_DTR) ? TIOCM_DTR : 0)
592 | ((mcr & CH341_BIT_RTS) ? TIOCM_RTS : 0)
593 | ((status & CH341_BIT_CTS) ? TIOCM_CTS : 0)
594 | ((status & CH341_BIT_DSR) ? TIOCM_DSR : 0)
595 | ((status & CH341_BIT_RI) ? TIOCM_RI : 0)
596 | ((status & CH341_BIT_DCD) ? TIOCM_CD : 0);
597
598 dbg("%s - result = %x", __func__, result);
599
600 return result;
601}
602
603
604static int ch341_reset_resume(struct usb_interface *intf)
605{
606 struct usb_device *dev = interface_to_usbdev(intf);
607 struct usb_serial *serial = NULL;
608 struct ch341_private *priv;
609
610 serial = usb_get_intfdata(intf);
611 priv = usb_get_serial_port_data(serial->port[0]);
612
613 /*reconfigure ch341 serial port after bus-reset*/
614 ch341_configure(dev, priv);
615
616 usb_serial_resume(intf);
617
618 return 0;
619}
620
621static struct usb_driver ch341_driver = {
622 .name = "ch341",
623 .probe = usb_serial_probe,
624 .disconnect = usb_serial_disconnect,
625 .suspend = usb_serial_suspend,
626 .resume = usb_serial_resume,
627 .reset_resume = ch341_reset_resume,
628 .id_table = id_table,
629 .supports_autosuspend = 1,
630};
631
632static struct usb_serial_driver ch341_device = {
633 .driver = {
634 .owner = THIS_MODULE,
635 .name = "ch341-uart",
636 },
637 .id_table = id_table,
638 .num_ports = 1,
639 .open = ch341_open,
640 .dtr_rts = ch341_dtr_rts,
641 .carrier_raised = ch341_carrier_raised,
642 .close = ch341_close,
643 .ioctl = ch341_ioctl,
644 .set_termios = ch341_set_termios,
645 .break_ctl = ch341_break_ctl,
646 .tiocmget = ch341_tiocmget,
647 .tiocmset = ch341_tiocmset,
648 .read_int_callback = ch341_read_int_callback,
649 .attach = ch341_attach,
650};
651
652static struct usb_serial_driver * const serial_drivers[] = {
653 &ch341_device, NULL
654};
655
656module_usb_serial_driver(ch341_driver, serial_drivers);
657
658MODULE_LICENSE("GPL");
659
660module_param(debug, bool, S_IRUGO | S_IWUSR);
661MODULE_PARM_DESC(debug, "Debug enabled or not");