blob: dd625af7167c9231c409169a325380fb5875c44f [file] [log] [blame]
yuezonghe824eb0c2024-06-27 02:32:26 -07001/*
2 * net/tipc/eth_media.c: Ethernet bearer support for TIPC
3 *
4 * Copyright (c) 2001-2007, Ericsson AB
5 * Copyright (c) 2005-2008, 2011, Wind River Systems
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
10 *
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
19 *
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
35 */
36
37#include "core.h"
38#include "bearer.h"
39
40#define MAX_ETH_BEARERS MAX_BEARERS
41
42#define ETH_ADDR_OFFSET 4 /* message header offset of MAC address */
43
44/**
45 * struct eth_bearer - Ethernet bearer data structure
46 * @bearer: ptr to associated "generic" bearer structure
47 * @dev: ptr to associated Ethernet network device
48 * @tipc_packet_type: used in binding TIPC to Ethernet driver
49 * @cleanup: work item used when disabling bearer
50 */
51
52struct eth_bearer {
53 struct tipc_bearer *bearer;
54 struct net_device *dev;
55 struct packet_type tipc_packet_type;
56 struct work_struct setup;
57 struct work_struct cleanup;
58};
59
60static struct tipc_media eth_media_info;
61static struct eth_bearer eth_bearers[MAX_ETH_BEARERS];
62static int eth_started;
63static struct notifier_block notifier;
64
65/**
66 * eth_media_addr_set - initialize Ethernet media address structure
67 *
68 * Media-dependent "value" field stores MAC address in first 6 bytes
69 * and zeroes out the remaining bytes.
70 */
71
72static void eth_media_addr_set(struct tipc_media_addr *a, char *mac)
73{
74 memcpy(a->value, mac, ETH_ALEN);
75 memset(a->value + ETH_ALEN, 0, sizeof(a->value) - ETH_ALEN);
76 a->media_id = TIPC_MEDIA_TYPE_ETH;
77 a->broadcast = !memcmp(mac, eth_media_info.bcast_addr.value, ETH_ALEN);
78}
79
80/**
81 * send_msg - send a TIPC message out over an Ethernet interface
82 */
83
84static int send_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr,
85 struct tipc_media_addr *dest)
86{
87 struct sk_buff *clone;
88 struct net_device *dev;
89 int delta;
90
91 clone = skb_clone(buf, GFP_ATOMIC);
92 if (!clone)
93 return 0;
94
95 dev = ((struct eth_bearer *)(tb_ptr->usr_handle))->dev;
96 delta = dev->hard_header_len - skb_headroom(buf);
97
98 if ((delta > 0) &&
99 pskb_expand_head(clone, SKB_DATA_ALIGN(delta), 0, GFP_ATOMIC)) {
100 kfree_skb(clone);
101 return 0;
102 }
103
104 skb_reset_network_header(clone);
105 clone->dev = dev;
106 dev_hard_header(clone, dev, ETH_P_TIPC, dest->value,
107 dev->dev_addr, clone->len);
108 dev_queue_xmit(clone);
109 return 0;
110}
111
112/**
113 * recv_msg - handle incoming TIPC message from an Ethernet interface
114 *
115 * Accept only packets explicitly sent to this node, or broadcast packets;
116 * ignores packets sent using Ethernet multicast, and traffic sent to other
117 * nodes (which can happen if interface is running in promiscuous mode).
118 */
119
120static int recv_msg(struct sk_buff *buf, struct net_device *dev,
121 struct packet_type *pt, struct net_device *orig_dev)
122{
123 struct eth_bearer *eb_ptr = (struct eth_bearer *)pt->af_packet_priv;
124
125 if (!net_eq(dev_net(dev), &init_net)) {
126 kfree_skb(buf);
127 return 0;
128 }
129
130 if (likely(eb_ptr->bearer)) {
131 if (likely(buf->pkt_type <= PACKET_BROADCAST)) {
132 buf->next = NULL;
133 tipc_recv_msg(buf, eb_ptr->bearer);
134 return 0;
135 }
136 }
137 kfree_skb(buf);
138 return 0;
139}
140
141/**
142 * setup_bearer - setup association between Ethernet bearer and interface
143 */
144static void setup_bearer(struct work_struct *work)
145{
146 struct eth_bearer *eb_ptr =
147 container_of(work, struct eth_bearer, setup);
148
149 dev_add_pack(&eb_ptr->tipc_packet_type);
150}
151
152/**
153 * enable_bearer - attach TIPC bearer to an Ethernet interface
154 */
155
156static int enable_bearer(struct tipc_bearer *tb_ptr)
157{
158 struct net_device *dev = NULL;
159 struct net_device *pdev = NULL;
160 struct eth_bearer *eb_ptr = &eth_bearers[0];
161 struct eth_bearer *stop = &eth_bearers[MAX_ETH_BEARERS];
162 char *driver_name = strchr((const char *)tb_ptr->name, ':') + 1;
163 int pending_dev = 0;
164
165 /* Find unused Ethernet bearer structure */
166
167 while (eb_ptr->dev) {
168 if (!eb_ptr->bearer)
169 pending_dev++;
170 if (++eb_ptr == stop)
171 return pending_dev ? -EAGAIN : -EDQUOT;
172 }
173
174 /* Find device with specified name */
175
176 read_lock(&dev_base_lock);
177 for_each_netdev(&init_net, pdev) {
178 if (!strncmp(pdev->name, driver_name, IFNAMSIZ)) {
179 dev = pdev;
180 dev_hold(dev);
181 break;
182 }
183 }
184 read_unlock(&dev_base_lock);
185 if (!dev)
186 return -ENODEV;
187
188 /* Create Ethernet bearer for device */
189
190 eb_ptr->dev = dev;
191 eb_ptr->tipc_packet_type.type = htons(ETH_P_TIPC);
192 eb_ptr->tipc_packet_type.dev = dev;
193 eb_ptr->tipc_packet_type.func = recv_msg;
194 eb_ptr->tipc_packet_type.af_packet_priv = eb_ptr;
195 INIT_LIST_HEAD(&(eb_ptr->tipc_packet_type.list));
196 INIT_WORK(&eb_ptr->setup, setup_bearer);
197 schedule_work(&eb_ptr->setup);
198
199 /* Associate TIPC bearer with Ethernet bearer */
200
201 eb_ptr->bearer = tb_ptr;
202 tb_ptr->usr_handle = (void *)eb_ptr;
203 tb_ptr->mtu = dev->mtu;
204 tb_ptr->blocked = 0;
205 eth_media_addr_set(&tb_ptr->addr, (char *)dev->dev_addr);
206 return 0;
207}
208
209/**
210 * cleanup_bearer - break association between Ethernet bearer and interface
211 *
212 * This routine must be invoked from a work queue because it can sleep.
213 */
214
215static void cleanup_bearer(struct work_struct *work)
216{
217 struct eth_bearer *eb_ptr =
218 container_of(work, struct eth_bearer, cleanup);
219
220 dev_remove_pack(&eb_ptr->tipc_packet_type);
221 dev_put(eb_ptr->dev);
222 eb_ptr->dev = NULL;
223}
224
225/**
226 * disable_bearer - detach TIPC bearer from an Ethernet interface
227 *
228 * Mark Ethernet bearer as inactive so that incoming buffers are thrown away,
229 * then get worker thread to complete bearer cleanup. (Can't do cleanup
230 * here because cleanup code needs to sleep and caller holds spinlocks.)
231 */
232
233static void disable_bearer(struct tipc_bearer *tb_ptr)
234{
235 struct eth_bearer *eb_ptr = (struct eth_bearer *)tb_ptr->usr_handle;
236
237 eb_ptr->bearer = NULL;
238 INIT_WORK(&eb_ptr->cleanup, cleanup_bearer);
239 schedule_work(&eb_ptr->cleanup);
240}
241
242/**
243 * recv_notification - handle device updates from OS
244 *
245 * Change the state of the Ethernet bearer (if any) associated with the
246 * specified device.
247 */
248
249static int recv_notification(struct notifier_block *nb, unsigned long evt,
250 void *dv)
251{
252 struct net_device *dev = (struct net_device *)dv;
253 struct eth_bearer *eb_ptr = &eth_bearers[0];
254 struct eth_bearer *stop = &eth_bearers[MAX_ETH_BEARERS];
255
256 if (!net_eq(dev_net(dev), &init_net))
257 return NOTIFY_DONE;
258
259 while ((eb_ptr->dev != dev)) {
260 if (++eb_ptr == stop)
261 return NOTIFY_DONE; /* couldn't find device */
262 }
263 if (!eb_ptr->bearer)
264 return NOTIFY_DONE; /* bearer had been disabled */
265
266 eb_ptr->bearer->mtu = dev->mtu;
267
268 switch (evt) {
269 case NETDEV_CHANGE:
270 if (netif_carrier_ok(dev))
271 tipc_continue(eb_ptr->bearer);
272 else
273 tipc_block_bearer(eb_ptr->bearer->name);
274 break;
275 case NETDEV_UP:
276 tipc_continue(eb_ptr->bearer);
277 break;
278 case NETDEV_DOWN:
279 tipc_block_bearer(eb_ptr->bearer->name);
280 break;
281 case NETDEV_CHANGEMTU:
282 case NETDEV_CHANGEADDR:
283 tipc_block_bearer(eb_ptr->bearer->name);
284 tipc_continue(eb_ptr->bearer);
285 break;
286 case NETDEV_UNREGISTER:
287 case NETDEV_CHANGENAME:
288 tipc_disable_bearer(eb_ptr->bearer->name);
289 break;
290 }
291 return NOTIFY_OK;
292}
293
294/**
295 * eth_addr2str - convert Ethernet address to string
296 */
297
298static int eth_addr2str(struct tipc_media_addr *a, char *str_buf, int str_size)
299{
300 if (str_size < 18) /* 18 = strlen("aa:bb:cc:dd:ee:ff\0") */
301 return 1;
302
303 sprintf(str_buf, "%pM", a->value);
304 return 0;
305}
306
307/**
308 * eth_str2addr - convert string to Ethernet address
309 */
310
311static int eth_str2addr(struct tipc_media_addr *a, char *str_buf)
312{
313 char mac[ETH_ALEN];
314 int r;
315
316 r = sscanf(str_buf, "%02x:%02x:%02x:%02x:%02x:%02x",
317 (u32 *)&mac[0], (u32 *)&mac[1], (u32 *)&mac[2],
318 (u32 *)&mac[3], (u32 *)&mac[4], (u32 *)&mac[5]);
319
320 if (r != ETH_ALEN)
321 return 1;
322
323 eth_media_addr_set(a, mac);
324 return 0;
325}
326
327/**
328 * eth_str2addr - convert Ethernet address format to message header format
329 */
330
331static int eth_addr2msg(struct tipc_media_addr *a, char *msg_area)
332{
333 memset(msg_area, 0, TIPC_MEDIA_ADDR_SIZE);
334 msg_area[TIPC_MEDIA_TYPE_OFFSET] = TIPC_MEDIA_TYPE_ETH;
335 memcpy(msg_area + ETH_ADDR_OFFSET, a->value, ETH_ALEN);
336 return 0;
337}
338
339/**
340 * eth_str2addr - convert message header address format to Ethernet format
341 */
342
343static int eth_msg2addr(struct tipc_media_addr *a, char *msg_area)
344{
345 if (msg_area[TIPC_MEDIA_TYPE_OFFSET] != TIPC_MEDIA_TYPE_ETH)
346 return 1;
347
348 eth_media_addr_set(a, msg_area + ETH_ADDR_OFFSET);
349 return 0;
350}
351
352/*
353 * Ethernet media registration info
354 */
355
356static struct tipc_media eth_media_info = {
357 .send_msg = send_msg,
358 .enable_bearer = enable_bearer,
359 .disable_bearer = disable_bearer,
360 .addr2str = eth_addr2str,
361 .str2addr = eth_str2addr,
362 .addr2msg = eth_addr2msg,
363 .msg2addr = eth_msg2addr,
364 .bcast_addr = { { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
365 TIPC_MEDIA_TYPE_ETH, 1 },
366 .priority = TIPC_DEF_LINK_PRI,
367 .tolerance = TIPC_DEF_LINK_TOL,
368 .window = TIPC_DEF_LINK_WIN,
369 .type_id = TIPC_MEDIA_TYPE_ETH,
370 .name = "eth"
371};
372
373/**
374 * tipc_eth_media_start - activate Ethernet bearer support
375 *
376 * Register Ethernet media type with TIPC bearer code. Also register
377 * with OS for notifications about device state changes.
378 */
379
380int tipc_eth_media_start(void)
381{
382 int res;
383
384 if (eth_started)
385 return -EINVAL;
386
387 res = tipc_register_media(&eth_media_info);
388 if (res)
389 return res;
390
391 notifier.notifier_call = &recv_notification;
392 notifier.priority = 0;
393 res = register_netdevice_notifier(&notifier);
394 if (!res)
395 eth_started = 1;
396 return res;
397}
398
399/**
400 * tipc_eth_media_stop - deactivate Ethernet bearer support
401 */
402
403void tipc_eth_media_stop(void)
404{
405 if (!eth_started)
406 return;
407
408 flush_scheduled_work();
409 unregister_netdevice_notifier(&notifier);
410 eth_started = 0;
411}