| /****************************************************************************** | 
 |  * | 
 |  * Module Name: tbxfload - Table load/unload external interfaces | 
 |  * | 
 |  *****************************************************************************/ | 
 |  | 
 | /* | 
 |  * Copyright (C) 2000 - 2017, Intel Corp. | 
 |  * All rights reserved. | 
 |  * | 
 |  * Redistribution and use in source and binary forms, with or without | 
 |  * modification, are permitted provided that the following conditions | 
 |  * are met: | 
 |  * 1. Redistributions of source code must retain the above copyright | 
 |  *    notice, this list of conditions, and the following disclaimer, | 
 |  *    without modification. | 
 |  * 2. Redistributions in binary form must reproduce at minimum a disclaimer | 
 |  *    substantially similar to the "NO WARRANTY" disclaimer below | 
 |  *    ("Disclaimer") and any redistribution must be conditioned upon | 
 |  *    including a substantially similar Disclaimer requirement for further | 
 |  *    binary redistribution. | 
 |  * 3. Neither the names of the above-listed copyright holders nor the names | 
 |  *    of any contributors may be used to endorse or promote products derived | 
 |  *    from this software without specific prior written permission. | 
 |  * | 
 |  * Alternatively, this software may be distributed under the terms of the | 
 |  * GNU General Public License ("GPL") version 2 as published by the Free | 
 |  * Software Foundation. | 
 |  * | 
 |  * NO WARRANTY | 
 |  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
 |  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
 |  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | 
 |  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
 |  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
 |  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
 |  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
 |  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
 |  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | 
 |  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
 |  * POSSIBILITY OF SUCH DAMAGES. | 
 |  */ | 
 |  | 
 | #define EXPORT_ACPI_INTERFACES | 
 |  | 
 | #include <acpi/acpi.h> | 
 | #include "accommon.h" | 
 | #include "acnamesp.h" | 
 | #include "actables.h" | 
 | #include "acevents.h" | 
 |  | 
 | #define _COMPONENT          ACPI_TABLES | 
 | ACPI_MODULE_NAME("tbxfload") | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_load_tables | 
 |  * | 
 |  * PARAMETERS:  None | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Load the ACPI tables from the RSDT/XSDT | 
 |  * | 
 |  ******************************************************************************/ | 
 | acpi_status ACPI_INIT_FUNCTION acpi_load_tables(void) | 
 | { | 
 | 	acpi_status status; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(acpi_load_tables); | 
 |  | 
 | 	/* | 
 | 	 * Install the default operation region handlers. These are the | 
 | 	 * handlers that are defined by the ACPI specification to be | 
 | 	 * "always accessible" -- namely, system_memory, system_IO, and | 
 | 	 * PCI_Config. This also means that no _REG methods need to be | 
 | 	 * run for these address spaces. We need to have these handlers | 
 | 	 * installed before any AML code can be executed, especially any | 
 | 	 * module-level code (11/2015). | 
 | 	 * Note that we allow OSPMs to install their own region handlers | 
 | 	 * between acpi_initialize_subsystem() and acpi_load_tables() to use | 
 | 	 * their customized default region handlers. | 
 | 	 */ | 
 | 	status = acpi_ev_install_region_handlers(); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		ACPI_EXCEPTION((AE_INFO, status, | 
 | 				"During Region initialization")); | 
 | 		return_ACPI_STATUS(status); | 
 | 	} | 
 |  | 
 | 	/* Load the namespace from the tables */ | 
 |  | 
 | 	status = acpi_tb_load_namespace(); | 
 |  | 
 | 	/* Don't let single failures abort the load */ | 
 |  | 
 | 	if (status == AE_CTRL_TERMINATE) { | 
 | 		status = AE_OK; | 
 | 	} | 
 |  | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		ACPI_EXCEPTION((AE_INFO, status, | 
 | 				"While loading namespace from ACPI tables")); | 
 | 	} | 
 |  | 
 | 	if (acpi_gbl_parse_table_as_term_list | 
 | 	    || !acpi_gbl_group_module_level_code) { | 
 | 		/* | 
 | 		 * Initialize the objects that remain uninitialized. This | 
 | 		 * runs the executable AML that may be part of the | 
 | 		 * declaration of these objects: | 
 | 		 * operation_regions, buffer_fields, Buffers, and Packages. | 
 | 		 */ | 
 | 		status = acpi_ns_initialize_objects(); | 
 | 		if (ACPI_FAILURE(status)) { | 
 | 			return_ACPI_STATUS(status); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	acpi_gbl_namespace_initialized = TRUE; | 
 | 	return_ACPI_STATUS(status); | 
 | } | 
 |  | 
 | ACPI_EXPORT_SYMBOL_INIT(acpi_load_tables) | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_tb_load_namespace | 
 |  * | 
 |  * PARAMETERS:  None | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Load the namespace from the DSDT and all SSDTs/PSDTs found in | 
 |  *              the RSDT/XSDT. | 
 |  * | 
 |  ******************************************************************************/ | 
 | acpi_status acpi_tb_load_namespace(void) | 
 | { | 
 | 	acpi_status status; | 
 | 	u32 i; | 
 | 	struct acpi_table_header *new_dsdt; | 
 | 	struct acpi_table_desc *table; | 
 | 	u32 tables_loaded = 0; | 
 | 	u32 tables_failed = 0; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(tb_load_namespace); | 
 |  | 
 | 	(void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); | 
 |  | 
 | 	/* | 
 | 	 * Load the namespace. The DSDT is required, but any SSDT and | 
 | 	 * PSDT tables are optional. Verify the DSDT. | 
 | 	 */ | 
 | 	table = &acpi_gbl_root_table_list.tables[acpi_gbl_dsdt_index]; | 
 |  | 
 | 	if (!acpi_gbl_root_table_list.current_table_count || | 
 | 	    !ACPI_COMPARE_NAME(table->signature.ascii, ACPI_SIG_DSDT) || | 
 | 	    ACPI_FAILURE(acpi_tb_validate_table(table))) { | 
 | 		status = AE_NO_ACPI_TABLES; | 
 | 		goto unlock_and_exit; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Save the DSDT pointer for simple access. This is the mapped memory | 
 | 	 * address. We must take care here because the address of the .Tables | 
 | 	 * array can change dynamically as tables are loaded at run-time. Note: | 
 | 	 * .Pointer field is not validated until after call to acpi_tb_validate_table. | 
 | 	 */ | 
 | 	acpi_gbl_DSDT = table->pointer; | 
 |  | 
 | 	/* | 
 | 	 * Optionally copy the entire DSDT to local memory (instead of simply | 
 | 	 * mapping it.) There are some BIOSs that corrupt or replace the original | 
 | 	 * DSDT, creating the need for this option. Default is FALSE, do not copy | 
 | 	 * the DSDT. | 
 | 	 */ | 
 | 	if (acpi_gbl_copy_dsdt_locally) { | 
 | 		new_dsdt = acpi_tb_copy_dsdt(acpi_gbl_dsdt_index); | 
 | 		if (new_dsdt) { | 
 | 			acpi_gbl_DSDT = new_dsdt; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Save the original DSDT header for detection of table corruption | 
 | 	 * and/or replacement of the DSDT from outside the OS. | 
 | 	 */ | 
 | 	memcpy(&acpi_gbl_original_dsdt_header, acpi_gbl_DSDT, | 
 | 	       sizeof(struct acpi_table_header)); | 
 |  | 
 | 	/* Load and parse tables */ | 
 |  | 
 | 	(void)acpi_ut_release_mutex(ACPI_MTX_TABLES); | 
 | 	status = acpi_ns_load_table(acpi_gbl_dsdt_index, acpi_gbl_root_node); | 
 | 	(void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		ACPI_EXCEPTION((AE_INFO, status, "[DSDT] table load failed")); | 
 | 		tables_failed++; | 
 | 	} else { | 
 | 		tables_loaded++; | 
 | 	} | 
 |  | 
 | 	/* Load any SSDT or PSDT tables. Note: Loop leaves tables locked */ | 
 |  | 
 | 	for (i = 0; i < acpi_gbl_root_table_list.current_table_count; ++i) { | 
 | 		table = &acpi_gbl_root_table_list.tables[i]; | 
 |  | 
 | 		if (!table->address || | 
 | 		    (!ACPI_COMPARE_NAME(table->signature.ascii, ACPI_SIG_SSDT) | 
 | 		     && !ACPI_COMPARE_NAME(table->signature.ascii, | 
 | 					   ACPI_SIG_PSDT) | 
 | 		     && !ACPI_COMPARE_NAME(table->signature.ascii, | 
 | 					   ACPI_SIG_OSDT)) | 
 | 		    || ACPI_FAILURE(acpi_tb_validate_table(table))) { | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* Ignore errors while loading tables, get as many as possible */ | 
 |  | 
 | 		(void)acpi_ut_release_mutex(ACPI_MTX_TABLES); | 
 | 		status = acpi_ns_load_table(i, acpi_gbl_root_node); | 
 | 		(void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); | 
 | 		if (ACPI_FAILURE(status)) { | 
 | 			ACPI_EXCEPTION((AE_INFO, status, | 
 | 					"(%4.4s:%8.8s) while loading table", | 
 | 					table->signature.ascii, | 
 | 					table->pointer->oem_table_id)); | 
 |  | 
 | 			tables_failed++; | 
 |  | 
 | 			ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, | 
 | 					      "Table [%4.4s:%8.8s] (id FF) - Table namespace load failed\n\n", | 
 | 					      table->signature.ascii, | 
 | 					      table->pointer->oem_table_id)); | 
 | 		} else { | 
 | 			tables_loaded++; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!tables_failed) { | 
 | 		ACPI_INFO(("%u ACPI AML tables successfully acquired and loaded", tables_loaded)); | 
 | 	} else { | 
 | 		ACPI_ERROR((AE_INFO, | 
 | 			    "%u table load failures, %u successful", | 
 | 			    tables_failed, tables_loaded)); | 
 |  | 
 | 		/* Indicate at least one failure */ | 
 |  | 
 | 		status = AE_CTRL_TERMINATE; | 
 | 	} | 
 |  | 
 | #ifdef ACPI_APPLICATION | 
 | 	ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, "\n")); | 
 | #endif | 
 |  | 
 | unlock_and_exit: | 
 | 	(void)acpi_ut_release_mutex(ACPI_MTX_TABLES); | 
 | 	return_ACPI_STATUS(status); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_install_table | 
 |  * | 
 |  * PARAMETERS:  address             - Address of the ACPI table to be installed. | 
 |  *              physical            - Whether the address is a physical table | 
 |  *                                    address or not | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Dynamically install an ACPI table. | 
 |  *              Note: This function should only be invoked after | 
 |  *                    acpi_initialize_tables() and before acpi_load_tables(). | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_status ACPI_INIT_FUNCTION | 
 | acpi_install_table(acpi_physical_address address, u8 physical) | 
 | { | 
 | 	acpi_status status; | 
 | 	u8 flags; | 
 | 	u32 table_index; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(acpi_install_table); | 
 |  | 
 | 	if (physical) { | 
 | 		flags = ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL; | 
 | 	} else { | 
 | 		flags = ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL; | 
 | 	} | 
 |  | 
 | 	status = acpi_tb_install_standard_table(address, flags, | 
 | 						FALSE, FALSE, &table_index); | 
 |  | 
 | 	return_ACPI_STATUS(status); | 
 | } | 
 |  | 
 | ACPI_EXPORT_SYMBOL_INIT(acpi_install_table) | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_load_table | 
 |  * | 
 |  * PARAMETERS:  table               - Pointer to a buffer containing the ACPI | 
 |  *                                    table to be loaded. | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Dynamically load an ACPI table from the caller's buffer. Must | 
 |  *              be a valid ACPI table with a valid ACPI table header. | 
 |  *              Note1: Mainly intended to support hotplug addition of SSDTs. | 
 |  *              Note2: Does not copy the incoming table. User is responsible | 
 |  *              to ensure that the table is not deleted or unmapped. | 
 |  * | 
 |  ******************************************************************************/ | 
 | acpi_status acpi_load_table(struct acpi_table_header *table) | 
 | { | 
 | 	acpi_status status; | 
 | 	u32 table_index; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(acpi_load_table); | 
 |  | 
 | 	/* Parameter validation */ | 
 |  | 
 | 	if (!table) { | 
 | 		return_ACPI_STATUS(AE_BAD_PARAMETER); | 
 | 	} | 
 |  | 
 | 	/* Install the table and load it into the namespace */ | 
 |  | 
 | 	ACPI_INFO(("Host-directed Dynamic ACPI Table Load:")); | 
 | 	status = acpi_tb_install_and_load_table(ACPI_PTR_TO_PHYSADDR(table), | 
 | 						ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL, | 
 | 						FALSE, &table_index); | 
 | 	return_ACPI_STATUS(status); | 
 | } | 
 |  | 
 | ACPI_EXPORT_SYMBOL(acpi_load_table) | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_unload_parent_table | 
 |  * | 
 |  * PARAMETERS:  object              - Handle to any namespace object owned by | 
 |  *                                    the table to be unloaded | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Via any namespace object within an SSDT or OEMx table, unloads | 
 |  *              the table and deletes all namespace objects associated with | 
 |  *              that table. Unloading of the DSDT is not allowed. | 
 |  *              Note: Mainly intended to support hotplug removal of SSDTs. | 
 |  * | 
 |  ******************************************************************************/ | 
 | acpi_status acpi_unload_parent_table(acpi_handle object) | 
 | { | 
 | 	struct acpi_namespace_node *node = | 
 | 	    ACPI_CAST_PTR(struct acpi_namespace_node, object); | 
 | 	acpi_status status = AE_NOT_EXIST; | 
 | 	acpi_owner_id owner_id; | 
 | 	u32 i; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(acpi_unload_parent_table); | 
 |  | 
 | 	/* Parameter validation */ | 
 |  | 
 | 	if (!object) { | 
 | 		return_ACPI_STATUS(AE_BAD_PARAMETER); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * The node owner_id is currently the same as the parent table ID. | 
 | 	 * However, this could change in the future. | 
 | 	 */ | 
 | 	owner_id = node->owner_id; | 
 | 	if (!owner_id) { | 
 |  | 
 | 		/* owner_id==0 means DSDT is the owner. DSDT cannot be unloaded */ | 
 |  | 
 | 		return_ACPI_STATUS(AE_TYPE); | 
 | 	} | 
 |  | 
 | 	/* Must acquire the table lock during this operation */ | 
 |  | 
 | 	status = acpi_ut_acquire_mutex(ACPI_MTX_TABLES); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		return_ACPI_STATUS(status); | 
 | 	} | 
 |  | 
 | 	/* Find the table in the global table list */ | 
 |  | 
 | 	for (i = 0; i < acpi_gbl_root_table_list.current_table_count; i++) { | 
 | 		if (owner_id != acpi_gbl_root_table_list.tables[i].owner_id) { | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Allow unload of SSDT and OEMx tables only. Do not allow unload | 
 | 		 * of the DSDT. No other types of tables should get here, since | 
 | 		 * only these types can contain AML and thus are the only types | 
 | 		 * that can create namespace objects. | 
 | 		 */ | 
 | 		if (ACPI_COMPARE_NAME | 
 | 		    (acpi_gbl_root_table_list.tables[i].signature.ascii, | 
 | 		     ACPI_SIG_DSDT)) { | 
 | 			status = AE_TYPE; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		(void)acpi_ut_release_mutex(ACPI_MTX_TABLES); | 
 | 		status = acpi_tb_unload_table(i); | 
 | 		(void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	(void)acpi_ut_release_mutex(ACPI_MTX_TABLES); | 
 | 	return_ACPI_STATUS(status); | 
 | } | 
 |  | 
 | ACPI_EXPORT_SYMBOL(acpi_unload_parent_table) |