|  | /* | 
|  | * Copyright (C) ST-Ericsson 2010 - 2013 | 
|  | * Author: Martin Persson <martin.persson@stericsson.com> | 
|  | *         Hongbo Zhang <hongbo.zhang@linaro.org> | 
|  | * License Terms: GNU General Public License v2 | 
|  | * | 
|  | * ABX500 does not provide auto ADC, so to monitor the required temperatures, | 
|  | * a periodic work is used. It is more important to not wake up the CPU than | 
|  | * to perform this job, hence the use of a deferred delay. | 
|  | * | 
|  | * A deferred delay for thermal monitor is considered safe because: | 
|  | * If the chip gets too hot during a sleep state it's most likely due to | 
|  | * external factors, such as the surrounding temperature. I.e. no SW decisions | 
|  | * will make any difference. | 
|  | */ | 
|  |  | 
|  | #include <linux/err.h> | 
|  | #include <linux/hwmon.h> | 
|  | #include <linux/hwmon-sysfs.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/pm.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/sysfs.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include "abx500.h" | 
|  |  | 
|  | #define DEFAULT_MONITOR_DELAY	HZ | 
|  | #define DEFAULT_MAX_TEMP	130 | 
|  |  | 
|  | static inline void schedule_monitor(struct abx500_temp *data) | 
|  | { | 
|  | data->work_active = true; | 
|  | schedule_delayed_work(&data->work, DEFAULT_MONITOR_DELAY); | 
|  | } | 
|  |  | 
|  | static void threshold_updated(struct abx500_temp *data) | 
|  | { | 
|  | int i; | 
|  | for (i = 0; i < data->monitored_sensors; i++) | 
|  | if (data->max[i] != 0 || data->min[i] != 0) { | 
|  | schedule_monitor(data); | 
|  | return; | 
|  | } | 
|  |  | 
|  | dev_dbg(&data->pdev->dev, "No active thresholds.\n"); | 
|  | cancel_delayed_work_sync(&data->work); | 
|  | data->work_active = false; | 
|  | } | 
|  |  | 
|  | static void gpadc_monitor(struct work_struct *work) | 
|  | { | 
|  | int temp, i, ret; | 
|  | char alarm_node[30]; | 
|  | bool updated_min_alarm, updated_max_alarm; | 
|  | struct abx500_temp *data; | 
|  |  | 
|  | data = container_of(work, struct abx500_temp, work.work); | 
|  | mutex_lock(&data->lock); | 
|  |  | 
|  | for (i = 0; i < data->monitored_sensors; i++) { | 
|  | /* Thresholds are considered inactive if set to 0 */ | 
|  | if (data->max[i] == 0 && data->min[i] == 0) | 
|  | continue; | 
|  |  | 
|  | if (data->max[i] < data->min[i]) | 
|  | continue; | 
|  |  | 
|  | ret = data->ops.read_sensor(data, data->gpadc_addr[i], &temp); | 
|  | if (ret < 0) { | 
|  | dev_err(&data->pdev->dev, "GPADC read failed\n"); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | updated_min_alarm = false; | 
|  | updated_max_alarm = false; | 
|  |  | 
|  | if (data->min[i] != 0) { | 
|  | if (temp < data->min[i]) { | 
|  | if (data->min_alarm[i] == false) { | 
|  | data->min_alarm[i] = true; | 
|  | updated_min_alarm = true; | 
|  | } | 
|  | } else { | 
|  | if (data->min_alarm[i] == true) { | 
|  | data->min_alarm[i] = false; | 
|  | updated_min_alarm = true; | 
|  | } | 
|  | } | 
|  | } | 
|  | if (data->max[i] != 0) { | 
|  | if (temp > data->max[i]) { | 
|  | if (data->max_alarm[i] == false) { | 
|  | data->max_alarm[i] = true; | 
|  | updated_max_alarm = true; | 
|  | } | 
|  | } else if (temp < data->max[i] - data->max_hyst[i]) { | 
|  | if (data->max_alarm[i] == true) { | 
|  | data->max_alarm[i] = false; | 
|  | updated_max_alarm = true; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (updated_min_alarm) { | 
|  | ret = sprintf(alarm_node, "temp%d_min_alarm", i + 1); | 
|  | sysfs_notify(&data->pdev->dev.kobj, NULL, alarm_node); | 
|  | } | 
|  | if (updated_max_alarm) { | 
|  | ret = sprintf(alarm_node, "temp%d_max_alarm", i + 1); | 
|  | sysfs_notify(&data->pdev->dev.kobj, NULL, alarm_node); | 
|  | } | 
|  | } | 
|  |  | 
|  | schedule_monitor(data); | 
|  | mutex_unlock(&data->lock); | 
|  | } | 
|  |  | 
|  | /* HWMON sysfs interfaces */ | 
|  | static ssize_t show_name(struct device *dev, struct device_attribute *devattr, | 
|  | char *buf) | 
|  | { | 
|  | struct abx500_temp *data = dev_get_drvdata(dev); | 
|  | /* Show chip name */ | 
|  | return data->ops.show_name(dev, devattr, buf); | 
|  | } | 
|  |  | 
|  | static ssize_t show_label(struct device *dev, | 
|  | struct device_attribute *devattr, char *buf) | 
|  | { | 
|  | struct abx500_temp *data = dev_get_drvdata(dev); | 
|  | /* Show each sensor label */ | 
|  | return data->ops.show_label(dev, devattr, buf); | 
|  | } | 
|  |  | 
|  | static ssize_t show_input(struct device *dev, | 
|  | struct device_attribute *devattr, char *buf) | 
|  | { | 
|  | int ret, temp; | 
|  | struct abx500_temp *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | u8 gpadc_addr = data->gpadc_addr[attr->index]; | 
|  |  | 
|  | ret = data->ops.read_sensor(data, gpadc_addr, &temp); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return sprintf(buf, "%d\n", temp); | 
|  | } | 
|  |  | 
|  | /* Set functions (RW nodes) */ | 
|  | static ssize_t set_min(struct device *dev, struct device_attribute *devattr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | unsigned long val; | 
|  | struct abx500_temp *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int res = kstrtol(buf, 10, &val); | 
|  | if (res < 0) | 
|  | return res; | 
|  |  | 
|  | val = clamp_val(val, 0, DEFAULT_MAX_TEMP); | 
|  |  | 
|  | mutex_lock(&data->lock); | 
|  | data->min[attr->index] = val; | 
|  | threshold_updated(data); | 
|  | mutex_unlock(&data->lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t set_max(struct device *dev, struct device_attribute *devattr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | unsigned long val; | 
|  | struct abx500_temp *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int res = kstrtol(buf, 10, &val); | 
|  | if (res < 0) | 
|  | return res; | 
|  |  | 
|  | val = clamp_val(val, 0, DEFAULT_MAX_TEMP); | 
|  |  | 
|  | mutex_lock(&data->lock); | 
|  | data->max[attr->index] = val; | 
|  | threshold_updated(data); | 
|  | mutex_unlock(&data->lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t set_max_hyst(struct device *dev, | 
|  | struct device_attribute *devattr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | unsigned long val; | 
|  | struct abx500_temp *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int res = kstrtoul(buf, 10, &val); | 
|  | if (res < 0) | 
|  | return res; | 
|  |  | 
|  | val = clamp_val(val, 0, DEFAULT_MAX_TEMP); | 
|  |  | 
|  | mutex_lock(&data->lock); | 
|  | data->max_hyst[attr->index] = val; | 
|  | threshold_updated(data); | 
|  | mutex_unlock(&data->lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | /* Show functions (RO nodes) */ | 
|  | static ssize_t show_min(struct device *dev, | 
|  | struct device_attribute *devattr, char *buf) | 
|  | { | 
|  | struct abx500_temp *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  |  | 
|  | return sprintf(buf, "%lu\n", data->min[attr->index]); | 
|  | } | 
|  |  | 
|  | static ssize_t show_max(struct device *dev, | 
|  | struct device_attribute *devattr, char *buf) | 
|  | { | 
|  | struct abx500_temp *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  |  | 
|  | return sprintf(buf, "%lu\n", data->max[attr->index]); | 
|  | } | 
|  |  | 
|  | static ssize_t show_max_hyst(struct device *dev, | 
|  | struct device_attribute *devattr, char *buf) | 
|  | { | 
|  | struct abx500_temp *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  |  | 
|  | return sprintf(buf, "%lu\n", data->max_hyst[attr->index]); | 
|  | } | 
|  |  | 
|  | static ssize_t show_min_alarm(struct device *dev, | 
|  | struct device_attribute *devattr, char *buf) | 
|  | { | 
|  | struct abx500_temp *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  |  | 
|  | return sprintf(buf, "%d\n", data->min_alarm[attr->index]); | 
|  | } | 
|  |  | 
|  | static ssize_t show_max_alarm(struct device *dev, | 
|  | struct device_attribute *devattr, char *buf) | 
|  | { | 
|  | struct abx500_temp *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  |  | 
|  | return sprintf(buf, "%d\n", data->max_alarm[attr->index]); | 
|  | } | 
|  |  | 
|  | static umode_t abx500_attrs_visible(struct kobject *kobj, | 
|  | struct attribute *attr, int n) | 
|  | { | 
|  | struct device *dev = container_of(kobj, struct device, kobj); | 
|  | struct abx500_temp *data = dev_get_drvdata(dev); | 
|  |  | 
|  | if (data->ops.is_visible) | 
|  | return data->ops.is_visible(attr, n); | 
|  |  | 
|  | return attr->mode; | 
|  | } | 
|  |  | 
|  | /* Chip name, required by hwmon */ | 
|  | static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0); | 
|  |  | 
|  | /* GPADC - SENSOR1 */ | 
|  | static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL, 0); | 
|  | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0); | 
|  | static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_min, set_min, 0); | 
|  | static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_max, set_max, 0); | 
|  | static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, | 
|  | show_max_hyst, set_max_hyst, 0); | 
|  | static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_min_alarm, NULL, 0); | 
|  | static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_max_alarm, NULL, 0); | 
|  |  | 
|  | /* GPADC - SENSOR2 */ | 
|  | static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL, 1); | 
|  | static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 1); | 
|  | static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min, set_min, 1); | 
|  | static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max, set_max, 1); | 
|  | static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IWUSR | S_IRUGO, | 
|  | show_max_hyst, set_max_hyst, 1); | 
|  | static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_min_alarm, NULL, 1); | 
|  | static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_max_alarm, NULL, 1); | 
|  |  | 
|  | /* GPADC - SENSOR3 */ | 
|  | static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_label, NULL, 2); | 
|  | static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_input, NULL, 2); | 
|  | static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min, set_min, 2); | 
|  | static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max, set_max, 2); | 
|  | static SENSOR_DEVICE_ATTR(temp3_max_hyst, S_IWUSR | S_IRUGO, | 
|  | show_max_hyst, set_max_hyst, 2); | 
|  | static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_min_alarm, NULL, 2); | 
|  | static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_max_alarm, NULL, 2); | 
|  |  | 
|  | /* GPADC - SENSOR4 */ | 
|  | static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_label, NULL, 3); | 
|  | static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_input, NULL, 3); | 
|  | static SENSOR_DEVICE_ATTR(temp4_min, S_IWUSR | S_IRUGO, show_min, set_min, 3); | 
|  | static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_max, set_max, 3); | 
|  | static SENSOR_DEVICE_ATTR(temp4_max_hyst, S_IWUSR | S_IRUGO, | 
|  | show_max_hyst, set_max_hyst, 3); | 
|  | static SENSOR_DEVICE_ATTR(temp4_min_alarm, S_IRUGO, show_min_alarm, NULL, 3); | 
|  | static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_max_alarm, NULL, 3); | 
|  |  | 
|  | static struct attribute *abx500_temp_attributes[] = { | 
|  | &sensor_dev_attr_name.dev_attr.attr, | 
|  |  | 
|  | &sensor_dev_attr_temp1_label.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_min.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_max.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, | 
|  |  | 
|  | &sensor_dev_attr_temp2_label.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_min.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_max.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, | 
|  |  | 
|  | &sensor_dev_attr_temp3_label.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_min.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_max.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_min_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, | 
|  |  | 
|  | &sensor_dev_attr_temp4_label.dev_attr.attr, | 
|  | &sensor_dev_attr_temp4_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp4_min.dev_attr.attr, | 
|  | &sensor_dev_attr_temp4_max.dev_attr.attr, | 
|  | &sensor_dev_attr_temp4_max_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp4_min_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp4_max_alarm.dev_attr.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group abx500_temp_group = { | 
|  | .attrs = abx500_temp_attributes, | 
|  | .is_visible = abx500_attrs_visible, | 
|  | }; | 
|  |  | 
|  | static irqreturn_t abx500_temp_irq_handler(int irq, void *irq_data) | 
|  | { | 
|  | struct platform_device *pdev = irq_data; | 
|  | struct abx500_temp *data = platform_get_drvdata(pdev); | 
|  |  | 
|  | data->ops.irq_handler(irq, data); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int setup_irqs(struct platform_device *pdev) | 
|  | { | 
|  | int ret; | 
|  | int irq = platform_get_irq_byname(pdev, "ABX500_TEMP_WARM"); | 
|  |  | 
|  | if (irq < 0) { | 
|  | dev_err(&pdev->dev, "Get irq by name failed\n"); | 
|  | return irq; | 
|  | } | 
|  |  | 
|  | ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, | 
|  | abx500_temp_irq_handler, 0, "abx500-temp", pdev); | 
|  | if (ret < 0) | 
|  | dev_err(&pdev->dev, "Request threaded irq failed (%d)\n", ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int abx500_temp_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct abx500_temp *data; | 
|  | int err; | 
|  |  | 
|  | data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); | 
|  | if (!data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | data->pdev = pdev; | 
|  | mutex_init(&data->lock); | 
|  |  | 
|  | /* Chip specific initialization */ | 
|  | err = abx500_hwmon_init(data); | 
|  | if (err	< 0 || !data->ops.read_sensor || !data->ops.show_name || | 
|  | !data->ops.show_label) | 
|  | return err; | 
|  |  | 
|  | INIT_DEFERRABLE_WORK(&data->work, gpadc_monitor); | 
|  |  | 
|  | platform_set_drvdata(pdev, data); | 
|  |  | 
|  | err = sysfs_create_group(&pdev->dev.kobj, &abx500_temp_group); | 
|  | if (err < 0) { | 
|  | dev_err(&pdev->dev, "Create sysfs group failed (%d)\n", err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | data->hwmon_dev = hwmon_device_register(&pdev->dev); | 
|  | if (IS_ERR(data->hwmon_dev)) { | 
|  | err = PTR_ERR(data->hwmon_dev); | 
|  | dev_err(&pdev->dev, "Class registration failed (%d)\n", err); | 
|  | goto exit_sysfs_group; | 
|  | } | 
|  |  | 
|  | if (data->ops.irq_handler) { | 
|  | err = setup_irqs(pdev); | 
|  | if (err < 0) | 
|  | goto exit_hwmon_reg; | 
|  | } | 
|  | return 0; | 
|  |  | 
|  | exit_hwmon_reg: | 
|  | hwmon_device_unregister(data->hwmon_dev); | 
|  | exit_sysfs_group: | 
|  | sysfs_remove_group(&pdev->dev.kobj, &abx500_temp_group); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int abx500_temp_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct abx500_temp *data = platform_get_drvdata(pdev); | 
|  |  | 
|  | cancel_delayed_work_sync(&data->work); | 
|  | hwmon_device_unregister(data->hwmon_dev); | 
|  | sysfs_remove_group(&pdev->dev.kobj, &abx500_temp_group); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int abx500_temp_suspend(struct platform_device *pdev, | 
|  | pm_message_t state) | 
|  | { | 
|  | struct abx500_temp *data = platform_get_drvdata(pdev); | 
|  |  | 
|  | if (data->work_active) | 
|  | cancel_delayed_work_sync(&data->work); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int abx500_temp_resume(struct platform_device *pdev) | 
|  | { | 
|  | struct abx500_temp *data = platform_get_drvdata(pdev); | 
|  |  | 
|  | if (data->work_active) | 
|  | schedule_monitor(data); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | static const struct of_device_id abx500_temp_match[] = { | 
|  | { .compatible = "stericsson,abx500-temp" }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, abx500_temp_match); | 
|  | #endif | 
|  |  | 
|  | static struct platform_driver abx500_temp_driver = { | 
|  | .driver = { | 
|  | .name = "abx500-temp", | 
|  | .of_match_table = of_match_ptr(abx500_temp_match), | 
|  | }, | 
|  | .suspend = abx500_temp_suspend, | 
|  | .resume = abx500_temp_resume, | 
|  | .probe = abx500_temp_probe, | 
|  | .remove = abx500_temp_remove, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(abx500_temp_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Martin Persson <martin.persson@stericsson.com>"); | 
|  | MODULE_DESCRIPTION("ABX500 temperature driver"); | 
|  | MODULE_LICENSE("GPL"); |