| /* | 
 |  * mchp23k256.c | 
 |  * | 
 |  * Driver for Microchip 23k256 SPI RAM chips | 
 |  * | 
 |  * Copyright © 2016 Andrew Lunn <andrew@lunn.ch> | 
 |  * | 
 |  * This code is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  */ | 
 | #include <linux/device.h> | 
 | #include <linux/module.h> | 
 | #include <linux/mtd/mtd.h> | 
 | #include <linux/mtd/partitions.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/sizes.h> | 
 | #include <linux/spi/flash.h> | 
 | #include <linux/spi/spi.h> | 
 | #include <linux/of_device.h> | 
 |  | 
 | #define MAX_CMD_SIZE		4 | 
 |  | 
 | struct mchp23_caps { | 
 | 	u8 addr_width; | 
 | 	unsigned int size; | 
 | }; | 
 |  | 
 | struct mchp23k256_flash { | 
 | 	struct spi_device	*spi; | 
 | 	struct mutex		lock; | 
 | 	struct mtd_info		mtd; | 
 | 	const struct mchp23_caps	*caps; | 
 | }; | 
 |  | 
 | #define MCHP23K256_CMD_WRITE_STATUS	0x01 | 
 | #define MCHP23K256_CMD_WRITE		0x02 | 
 | #define MCHP23K256_CMD_READ		0x03 | 
 | #define MCHP23K256_MODE_SEQ		BIT(6) | 
 |  | 
 | #define to_mchp23k256_flash(x) container_of(x, struct mchp23k256_flash, mtd) | 
 |  | 
 | static void mchp23k256_addr2cmd(struct mchp23k256_flash *flash, | 
 | 				unsigned int addr, u8 *cmd) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	/* | 
 | 	 * Address is sent in big endian (MSB first) and we skip | 
 | 	 * the first entry of the cmd array which contains the cmd | 
 | 	 * opcode. | 
 | 	 */ | 
 | 	for (i = flash->caps->addr_width; i > 0; i--, addr >>= 8) | 
 | 		cmd[i] = addr; | 
 | } | 
 |  | 
 | static int mchp23k256_cmdsz(struct mchp23k256_flash *flash) | 
 | { | 
 | 	return 1 + flash->caps->addr_width; | 
 | } | 
 |  | 
 | static int mchp23k256_write(struct mtd_info *mtd, loff_t to, size_t len, | 
 | 			    size_t *retlen, const unsigned char *buf) | 
 | { | 
 | 	struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd); | 
 | 	struct spi_transfer transfer[2] = {}; | 
 | 	struct spi_message message; | 
 | 	unsigned char command[MAX_CMD_SIZE]; | 
 |  | 
 | 	spi_message_init(&message); | 
 |  | 
 | 	command[0] = MCHP23K256_CMD_WRITE; | 
 | 	mchp23k256_addr2cmd(flash, to, command); | 
 |  | 
 | 	transfer[0].tx_buf = command; | 
 | 	transfer[0].len = mchp23k256_cmdsz(flash); | 
 | 	spi_message_add_tail(&transfer[0], &message); | 
 |  | 
 | 	transfer[1].tx_buf = buf; | 
 | 	transfer[1].len = len; | 
 | 	spi_message_add_tail(&transfer[1], &message); | 
 |  | 
 | 	mutex_lock(&flash->lock); | 
 |  | 
 | 	spi_sync(flash->spi, &message); | 
 |  | 
 | 	if (retlen && message.actual_length > sizeof(command)) | 
 | 		*retlen += message.actual_length - sizeof(command); | 
 |  | 
 | 	mutex_unlock(&flash->lock); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mchp23k256_read(struct mtd_info *mtd, loff_t from, size_t len, | 
 | 			   size_t *retlen, unsigned char *buf) | 
 | { | 
 | 	struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd); | 
 | 	struct spi_transfer transfer[2] = {}; | 
 | 	struct spi_message message; | 
 | 	unsigned char command[MAX_CMD_SIZE]; | 
 |  | 
 | 	spi_message_init(&message); | 
 |  | 
 | 	memset(&transfer, 0, sizeof(transfer)); | 
 | 	command[0] = MCHP23K256_CMD_READ; | 
 | 	mchp23k256_addr2cmd(flash, from, command); | 
 |  | 
 | 	transfer[0].tx_buf = command; | 
 | 	transfer[0].len = mchp23k256_cmdsz(flash); | 
 | 	spi_message_add_tail(&transfer[0], &message); | 
 |  | 
 | 	transfer[1].rx_buf = buf; | 
 | 	transfer[1].len = len; | 
 | 	spi_message_add_tail(&transfer[1], &message); | 
 |  | 
 | 	mutex_lock(&flash->lock); | 
 |  | 
 | 	spi_sync(flash->spi, &message); | 
 |  | 
 | 	if (retlen && message.actual_length > sizeof(command)) | 
 | 		*retlen += message.actual_length - sizeof(command); | 
 |  | 
 | 	mutex_unlock(&flash->lock); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Set the device into sequential mode. This allows read/writes to the | 
 |  * entire SRAM in a single operation | 
 |  */ | 
 | static int mchp23k256_set_mode(struct spi_device *spi) | 
 | { | 
 | 	struct spi_transfer transfer = {}; | 
 | 	struct spi_message message; | 
 | 	unsigned char command[2]; | 
 |  | 
 | 	spi_message_init(&message); | 
 |  | 
 | 	command[0] = MCHP23K256_CMD_WRITE_STATUS; | 
 | 	command[1] = MCHP23K256_MODE_SEQ; | 
 |  | 
 | 	transfer.tx_buf = command; | 
 | 	transfer.len = sizeof(command); | 
 | 	spi_message_add_tail(&transfer, &message); | 
 |  | 
 | 	return spi_sync(spi, &message); | 
 | } | 
 |  | 
 | static const struct mchp23_caps mchp23k256_caps = { | 
 | 	.size = SZ_32K, | 
 | 	.addr_width = 2, | 
 | }; | 
 |  | 
 | static const struct mchp23_caps mchp23lcv1024_caps = { | 
 | 	.size = SZ_128K, | 
 | 	.addr_width = 3, | 
 | }; | 
 |  | 
 | static int mchp23k256_probe(struct spi_device *spi) | 
 | { | 
 | 	struct mchp23k256_flash *flash; | 
 | 	struct flash_platform_data *data; | 
 | 	int err; | 
 |  | 
 | 	flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL); | 
 | 	if (!flash) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	flash->spi = spi; | 
 | 	mutex_init(&flash->lock); | 
 | 	spi_set_drvdata(spi, flash); | 
 |  | 
 | 	err = mchp23k256_set_mode(spi); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	data = dev_get_platdata(&spi->dev); | 
 |  | 
 | 	flash->caps = of_device_get_match_data(&spi->dev); | 
 | 	if (!flash->caps) | 
 | 		flash->caps = &mchp23k256_caps; | 
 |  | 
 | 	mtd_set_of_node(&flash->mtd, spi->dev.of_node); | 
 | 	flash->mtd.dev.parent	= &spi->dev; | 
 | 	flash->mtd.type		= MTD_RAM; | 
 | 	flash->mtd.flags	= MTD_CAP_RAM; | 
 | 	flash->mtd.writesize	= 1; | 
 | 	flash->mtd.size		= flash->caps->size; | 
 | 	flash->mtd._read	= mchp23k256_read; | 
 | 	flash->mtd._write	= mchp23k256_write; | 
 |  | 
 | 	err = mtd_device_register(&flash->mtd, data ? data->parts : NULL, | 
 | 				  data ? data->nr_parts : 0); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mchp23k256_remove(struct spi_device *spi) | 
 | { | 
 | 	struct mchp23k256_flash *flash = spi_get_drvdata(spi); | 
 |  | 
 | 	return mtd_device_unregister(&flash->mtd); | 
 | } | 
 |  | 
 | static const struct of_device_id mchp23k256_of_table[] = { | 
 | 	{ | 
 | 		.compatible = "microchip,mchp23k256", | 
 | 		.data = &mchp23k256_caps, | 
 | 	}, | 
 | 	{ | 
 | 		.compatible = "microchip,mchp23lcv1024", | 
 | 		.data = &mchp23lcv1024_caps, | 
 | 	}, | 
 | 	{} | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, mchp23k256_of_table); | 
 |  | 
 | static struct spi_driver mchp23k256_driver = { | 
 | 	.driver = { | 
 | 		.name	= "mchp23k256", | 
 | 		.of_match_table = of_match_ptr(mchp23k256_of_table), | 
 | 	}, | 
 | 	.probe		= mchp23k256_probe, | 
 | 	.remove		= mchp23k256_remove, | 
 | }; | 
 |  | 
 | module_spi_driver(mchp23k256_driver); | 
 |  | 
 | MODULE_DESCRIPTION("MTD SPI driver for MCHP23K256 RAM chips"); | 
 | MODULE_AUTHOR("Andrew Lunn <andre@lunn.ch>"); | 
 | MODULE_LICENSE("GPL v2"); | 
 | MODULE_ALIAS("spi:mchp23k256"); |