[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/meta/meta-openembedded/meta-networking/recipes-protocols/quagga/files/quagga.init b/meta/meta-openembedded/meta-networking/recipes-protocols/quagga/files/quagga.init
new file mode 100644
index 0000000..df1beb7
--- /dev/null
+++ b/meta/meta-openembedded/meta-networking/recipes-protocols/quagga/files/quagga.init
@@ -0,0 +1,200 @@
+#!/bin/sh
+#
+# /etc/init.d/quagga -- start/stop the Quagga routing daemons
+#
+# Based on debian version by Endre Hirling <endre@mail.elte.hu> and
+# Christian Hammers <ch@debian.org>.
+#
+
+### BEGIN INIT INFO
+# Provides: quagga
+# Required-Start: $local_fs $network $remote_fs $syslog
+# Required-Stop: $local_fs $network $remote_fs $syslog
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: start and stop the Quagga routing suite
+# Description: Quagga is a routing suite for IP routing protocols like
+# BGP, OSPF, RIP and others. This script contols the main
+# daemon "quagga" as well as the individual protocol daemons.
+### END INIT INFO
+
+# NOTE: sbin must be before bin so we get the iproute2 ip and not the
+# busybox ip command. The busybox one flushes all routes instead of just
+# the dynamic routes
+PATH=/sbin:/usr/sbin:/bin:/usr/bin:/sbin
+D_PATH=/usr/sbin
+C_PATH=/etc/quagga
+
+# Keep zebra first and do not list watchquagga!
+DAEMONS="zebra bgpd ripd ripngd ospfd ospf6d isisd"
+
+# Print the name of the pidfile.
+pidfile()
+{
+ echo "/var/run/quagga/$1.pid"
+}
+
+# Check if daemon is started by using the pidfile.
+started()
+{
+ [ -e `pidfile $1` ] && kill -0 `cat \`pidfile $1\`` 2> /dev/null && return 0
+ return 1
+}
+
+# Loads the config via vtysh -b if configured to do so.
+vtysh_b ()
+{
+ # Rember, that all variables have been incremented by 1 in convert_daemon_prios()
+ if [ "$vtysh_enable" = 2 -a -f $C_PATH/Quagga.conf ]; then
+ /usr/bin/vtysh -b
+ fi
+}
+
+# Check if the daemon is activated and if its executable and config files
+# are in place.
+# params: daemon name
+# returns: 0=ok, 1=error
+check_daemon()
+{
+ # If the integrated config file is used the others are not checked.
+ if [ -r "$C_PATH/Quagga.conf" ]; then
+ return 0
+ fi
+
+ # check for config file
+ if [ ! -r "$C_PATH/$1.conf" ]; then
+ return 1
+ fi
+ return 0
+}
+
+# Starts the server if it's not alrady running according to the pid file.
+# The Quagga daemons creates the pidfile when starting.
+start()
+{
+ if ! check_daemon $1; then echo -n " (!$1)"; return; fi
+ echo -n " $1"
+ start-stop-daemon \
+ --start \
+ --pidfile=`pidfile $1` \
+ --exec "$D_PATH/$1" \
+ -- \
+ `eval echo "$""$1""_options"`
+
+}
+
+# Stop the daemon given in the parameter, printing its name to the terminal.
+stop()
+{
+ if ! started "$1" ; then
+ echo -n " (!$1)"
+ return 0
+ else
+ PIDFILE=`pidfile $1`
+ PID=`cat $PIDFILE 2>/dev/null`
+ start-stop-daemon --stop --quiet --exec "$D_PATH/$1"
+ #
+ # Now we have to wait until $DAEMON has _really_ stopped.
+ #
+ if test -n "$PID" && kill -0 $PID 2>/dev/null; then
+ echo -n " (waiting) ."
+ cnt=0
+ while kill -0 $PID 2>/dev/null; do
+ cnt=`expr $cnt + 1`
+ if [ $cnt -gt 60 ]; then
+ # Waited 120 secs now, fail.
+ echo -n "Failed.. "
+ break
+ fi
+ sleep 2
+ echo -n "."
+ done
+ fi
+ echo -n " $1"
+ rm -f `pidfile $1`
+ fi
+}
+
+stop_all()
+{
+ local daemon_list
+ daemon_list=${1:-$DAEMONS}
+
+ echo -n "Stopping Quagga daemons:"
+ for daemon_name in $daemon_list; do
+ stop "$daemon_name"
+ done
+ echo "."
+}
+
+start_all()
+{
+ local daemon_list
+ daemon_list=${1:-$DAEMONS}
+
+ echo -n "Starting Quagga daemons:"
+ for daemon_name in $daemon_list; do
+ start "$daemon_name"
+ done
+ echo "."
+}
+
+status_all()
+{
+ local daemon_list
+ daemon_list=${1:-$DAEMONS}
+ res=1
+
+ echo -n "quagga: "
+ for daemon_name in $daemon_list; do
+ if started "$daemon_name" ; then
+ id=`cat \`pidfile $daemon_name\``
+ echo -n "$daemon_name (pid $id) "
+ res=0
+ fi
+ done
+ if [ $res -eq 0 ]; then
+ echo "is running..."
+ else
+ echo "is stopped..."
+ fi
+ exit $res
+}
+
+#########################################################
+# Main program #
+#########################################################
+
+# Load configuration
+test -f /etc/default/quagga && . /etc/default/quagga
+
+case "$1" in
+ start)
+ cd $C_PATH/
+ start_all $2
+ vtysh_b
+ ;;
+
+ stop)
+ stop_all $2
+ echo "Removing all routes made by zebra."
+ ip route flush proto zebra
+ ;;
+
+ status)
+ status_all $2
+ ;;
+
+ restart|force-reload)
+ $0 stop $2
+ sleep 1
+ $0 start $2
+ ;;
+
+ *)
+ echo "Usage: /etc/init.d/quagga {start|stop|restart|status|force-reload} [daemon]"
+ exit 1
+ ;;
+esac
+
+exit 0