[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/meta/meta-openembedded/meta-oe/recipes-bsp/edac-utils/files/make-init-script-be-able-to-automatically-load-EDAC-.patch b/meta/meta-openembedded/meta-oe/recipes-bsp/edac-utils/files/make-init-script-be-able-to-automatically-load-EDAC-.patch
new file mode 100644
index 0000000..fddc25f
--- /dev/null
+++ b/meta/meta-openembedded/meta-oe/recipes-bsp/edac-utils/files/make-init-script-be-able-to-automatically-load-EDAC-.patch
@@ -0,0 +1,98 @@
+make init script be able to automatically load EDAC module.
+
+Upstream-Status: Inappropriate [embedded specific]
+
+Signed-off-by: Roy.Li <rongqing.li@windriver.com>
+---
+ src/etc/edac.init.in | 49 +++++++++++++++++++++++++++++++++++++++++++++++--
+ 1 file changed, 47 insertions(+), 2 deletions(-)
+
+diff --git a/src/etc/edac.init.in b/src/etc/edac.init.in
+index 7a51da9..5b568c4 100644
+--- a/src/etc/edac.init.in
++++ b/src/etc/edac.init.in
+@@ -42,7 +42,6 @@ for dir in "$sysconfdir/default" "$sysconfdir/sysconfig"; do
+ [ -f "$dir/$SERVICE" ] && . "$dir/$SERVICE"
+ done
+
+-
+ ###############################################################################
+
+ service_start ()
+@@ -52,6 +51,46 @@ service_start ()
+ # Assume that if EDAC_DRIVER is not set, then EDAC is configured
+ # automatically, thus return successfully, but don't do anything.
+ #
++ if [ ! -f /etc/edac/edac-driver ]; then
++ [ -d /sys/bus/edac/devices/mc/mc0 ] && \
++ echo `lsmod | grep _edac | cut -d" " -f1` > /etc/edac/edac-driver
++ fi
++
++ [ -f /etc/edac/edac-driver ] && EDAC_DRIVER=`cat /etc/edac/edac-driver`
++
++ if [ -z "$EDAC_DRIVER" ]; then
++
++ DRIVER_PATH=/lib/modules/`uname -r`/kernel/drivers/edac
++ oldpath=`pwd`
++ if [ -d $DRIVER_PATH ]; then
++
++ cd $DRIVER_PATH
++
++ for i in $(/bin/ls | /usr/bin/cut -d. -f1) ; do
++ /sbin/modprobe $i 2>/dev/null
++ if [ -d /sys/bus/edac/devices/mc/mc0 ]; then
++ echo $i> /etc/edac/edac-driver
++ EDAC_DRIVER=$i
++ break
++ fi
++ /sbin/modprobe -r $i 2>/dev/null
++ done
++
++ cd "$oldpath"
++
++
++ if [ -z "$EDAC_DRIVER" ]; then
++ echo "This board may not support EDAC, or EDAC module may not be compiled in"
++ exit
++ fi
++
++ else
++ echo "This board may not support EDAC, or EDAC module may not be compiled in"
++ exit
++ fi
++
++ fi
++
+ if [ -n "$EDAC_DRIVER" ]; then
+ echo -n "Starting ${SERVICE}: "
+ modprobe $EDAC_DRIVER
+@@ -76,12 +115,15 @@ service_start ()
+ service_stop ()
+ {
+ echo -n "Disabling ${SERVICE}: "
++
++ [ -f /etc/edac/edac-driver ] && EDAC_DRIVER=`cat /etc/edac/edac-driver`
++
+ if [ -n "$EDAC_DRIVER" ]; then
+ modprobe -r $EDAC_DRIVER
+ STATUS=$?
+ [ $STATUS -eq 0 ] && echo success || echo failure
+ else
+- echo "Not supported for this configuration."
++ echo "Not supported for this configuration, or EDAC Module is not loaded."
+ STATUS=6
+ fi
+ }
+@@ -92,6 +134,9 @@ service_status ()
+ {
+ # Print the current status of the service. Required by LSB.
+ #
++ [ -f /etc/edac/edac-driver ] && EDAC_DRIVER=`cat /etc/edac/edac-driver`
++ [ -z "$EDAC_DRIVER" ] && STATUS=1 && exit
++
+ edac-ctl --status
+ STATUS=0
+ }
+--
+1.7.10.4
+