[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/firewire-cdev b/src/kernel/linux/v4.14/Documentation/ABI/stable/firewire-cdev
new file mode 100644
index 0000000..f72ed65
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/firewire-cdev
@@ -0,0 +1,104 @@
+What: /dev/fw[0-9]+
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: linux1394-devel@lists.sourceforge.net
+Description:
+ The character device files /dev/fw* are the interface between
+ firewire-core and IEEE 1394 device drivers implemented in
+ userspace. The ioctl(2)- and read(2)-based ABI is defined and
+ documented in <linux/firewire-cdev.h>.
+
+ This ABI offers most of the features which firewire-core also
+ exposes to kernelspace IEEE 1394 drivers.
+
+ Each /dev/fw* is associated with one IEEE 1394 node, which can
+ be remote or local nodes. Operations on a /dev/fw* file have
+ different scope:
+ - The 1394 node which is associated with the file:
+ - Asynchronous request transmission
+ - Get the Configuration ROM
+ - Query node ID
+ - Query maximum speed of the path between this node
+ and local node
+ - The 1394 bus (i.e. "card") to which the node is attached to:
+ - Isochronous stream transmission and reception
+ - Asynchronous stream transmission and reception
+ - Asynchronous broadcast request transmission
+ - PHY packet transmission and reception
+ - Allocate, reallocate, deallocate isochronous
+ resources (channels, bandwidth) at the bus's IRM
+ - Query node IDs of local node, root node, IRM, bus
+ manager
+ - Query cycle time
+ - Bus reset initiation, bus reset event reception
+ - All 1394 buses:
+ - Allocation of IEEE 1212 address ranges on the local
+ link layers, reception of inbound requests to such
+ an address range, asynchronous response transmission
+ to inbound requests
+ - Addition of descriptors or directories to the local
+ nodes' Configuration ROM
+
+ Due to the different scope of operations and in order to let
+ userland implement different access permission models, some
+ operations are restricted to /dev/fw* files that are associated
+ with a local node:
+ - Addition of descriptors or directories to the local
+ nodes' Configuration ROM
+ - PHY packet transmission and reception
+
+ A /dev/fw* file remains associated with one particular node
+ during its entire life time. Bus topology changes, and hence
+ node ID changes, are tracked by firewire-core. ABI users do not
+ need to be aware of topology.
+
+ The following file operations are supported:
+
+ open(2)
+ Currently the only useful flags are O_RDWR.
+
+ ioctl(2)
+ Initiate various actions. Some take immediate effect, others
+ are performed asynchronously while or after the ioctl returns.
+ See the inline documentation in <linux/firewire-cdev.h> for
+ descriptions of all ioctls.
+
+ poll(2), select(2), epoll_wait(2) etc.
+ Watch for events to become available to be read.
+
+ read(2)
+ Receive various events. There are solicited events like
+ outbound asynchronous transaction completion or isochronous
+ buffer completion, and unsolicited events such as bus resets,
+ request reception, or PHY packet reception. Always use a read
+ buffer which is large enough to receive the largest event that
+ could ever arrive. See <linux/firewire-cdev.h> for descriptions
+ of all event types and for which ioctls affect reception of
+ events.
+
+ mmap(2)
+ Allocate a DMA buffer for isochronous reception or transmission
+ and map it into the process address space. The arguments should
+ be used as follows: addr = NULL, length = the desired buffer
+ size, i.e. number of packets times size of largest packet,
+ prot = at least PROT_READ for reception and at least PROT_WRITE
+ for transmission, flags = MAP_SHARED, fd = the handle to the
+ /dev/fw*, offset = 0.
+
+ Isochronous reception works in packet-per-buffer fashion except
+ for multichannel reception which works in buffer-fill mode.
+
+ munmap(2)
+ Unmap the isochronous I/O buffer from the process address space.
+
+ close(2)
+ Besides stopping and freeing I/O contexts that were associated
+ with the file descriptor, back out any changes to the local
+ nodes' Configuration ROM. Deallocate isochronous channels and
+ bandwidth at the IRM that were marked for kernel-assisted
+ re- and deallocation.
+
+Users: libraw1394
+ libdc1394
+ libhinawa
+ tools like linux-firewire-utils, fwhack, ...
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/o2cb b/src/kernel/linux/v4.14/Documentation/ABI/stable/o2cb
new file mode 100644
index 0000000..5eb1545
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/o2cb
@@ -0,0 +1,10 @@
+What: /sys/fs/o2cb/ (was /sys/o2cb)
+Date: Dec 2005
+KernelVersion: 2.6.16
+Contact: ocfs2-devel@oss.oracle.com
+Description: Ocfs2-tools looks at 'interface-revision' for versioning
+ information. Each logmask/ file controls a set of debug prints
+ and can be written into with the strings "allow", "deny", or
+ "off". Reading the file returns the current state.
+Users: ocfs2-tools. It's sufficient to mail proposed changes to
+ ocfs2-devel@oss.oracle.com.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/syscalls b/src/kernel/linux/v4.14/Documentation/ABI/stable/syscalls
new file mode 100644
index 0000000..c3ae3e7
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/syscalls
@@ -0,0 +1,10 @@
+What: The kernel syscall interface
+Description:
+ This interface matches much of the POSIX interface and is based
+ on it and other Unix based interfaces. It will only be added to
+ over time, and not have things removed from it.
+
+ Note that this interface is different for every architecture
+ that Linux supports. Please see the architecture-specific
+ documentation for details on the syscall numbers that are to be
+ mapped to each syscall.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-acpi-pmprofile b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-acpi-pmprofile
new file mode 100644
index 0000000..964c7a8
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-acpi-pmprofile
@@ -0,0 +1,22 @@
+What: /sys/firmware/acpi/pm_profile
+Date: 03-Nov-2011
+KernelVersion: v3.2
+Contact: linux-acpi@vger.kernel.org
+Description: The ACPI pm_profile sysfs interface exports the platform
+ power management (and performance) requirement expectations
+ as provided by BIOS. The integer value is directly passed as
+ retrieved from the FADT ACPI table.
+Values: For possible values see ACPI specification:
+ 5.2.9 Fixed ACPI Description Table (FADT)
+ Field: Preferred_PM_Profile
+
+ Currently these values are defined by spec:
+ 0 Unspecified
+ 1 Desktop
+ 2 Mobile
+ 3 Workstation
+ 4 Enterprise Server
+ 5 SOHO Server
+ 6 Appliance PC
+ 7 Performance Server
+ >7 Reserved
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-firewire b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-firewire
new file mode 100644
index 0000000..41e5a0c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-firewire
@@ -0,0 +1,133 @@
+What: /sys/bus/firewire/devices/fw[0-9]+/
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: linux1394-devel@lists.sourceforge.net
+Description:
+ IEEE 1394 node device attributes.
+ Read-only. Mutable during the node device's lifetime.
+ See IEEE 1212 for semantic definitions.
+
+ config_rom
+ Contents of the Configuration ROM register.
+ Binary attribute; an array of host-endian u32.
+
+ guid
+ The node's EUI-64 in the bus information block of
+ Configuration ROM.
+ Hexadecimal string representation of an u64.
+
+
+What: /sys/bus/firewire/devices/fw[0-9]+/units
+Date: June 2009
+KernelVersion: 2.6.31
+Contact: linux1394-devel@lists.sourceforge.net
+Description:
+ IEEE 1394 node device attribute.
+ Read-only. Mutable during the node device's lifetime.
+ See IEEE 1212 for semantic definitions.
+
+ units
+ Summary of all units present in an IEEE 1394 node.
+ Contains space-separated tuples of specifier_id and
+ version of each unit present in the node. Specifier_id
+ and version are hexadecimal string representations of
+ u24 of the respective unit directory entries.
+ Specifier_id and version within each tuple are separated
+ by a colon.
+
+Users: udev rules to set ownership and access permissions or ACLs of
+ /dev/fw[0-9]+ character device files
+
+
+What: /sys/bus/firewire/devices/fw[0-9]+/is_local
+Date: July 2012
+KernelVersion: 3.6
+Contact: linux1394-devel@lists.sourceforge.net
+Description:
+ IEEE 1394 node device attribute.
+ Read-only and immutable.
+Values: 1: The sysfs entry represents a local node (a controller card).
+ 0: The sysfs entry represents a remote node.
+
+
+What: /sys/bus/firewire/devices/fw[0-9]+[.][0-9]+/
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: linux1394-devel@lists.sourceforge.net
+Description:
+ IEEE 1394 unit device attributes.
+ Read-only. Immutable during the unit device's lifetime.
+ See IEEE 1212 for semantic definitions.
+
+ modalias
+ Same as MODALIAS in the uevent at device creation.
+
+ rom_index
+ Offset of the unit directory within the parent device's
+ (node device's) Configuration ROM, in quadlets.
+ Decimal string representation.
+
+
+What: /sys/bus/firewire/devices/*/
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: linux1394-devel@lists.sourceforge.net
+Description:
+ Attributes common to IEEE 1394 node devices and unit devices.
+ Read-only. Mutable during the node device's lifetime.
+ Immutable during the unit device's lifetime.
+ See IEEE 1212 for semantic definitions.
+
+ These attributes are only created if the root directory of an
+ IEEE 1394 node or the unit directory of an IEEE 1394 unit
+ actually contains according entries.
+
+ hardware_version
+ Hexadecimal string representation of an u24.
+
+ hardware_version_name
+ Contents of a respective textual descriptor leaf.
+
+ model
+ Hexadecimal string representation of an u24.
+
+ model_name
+ Contents of a respective textual descriptor leaf.
+
+ specifier_id
+ Hexadecimal string representation of an u24.
+ Mandatory in unit directories according to IEEE 1212.
+
+ vendor
+ Hexadecimal string representation of an u24.
+ Mandatory in the root directory according to IEEE 1212.
+
+ vendor_name
+ Contents of a respective textual descriptor leaf.
+
+ version
+ Hexadecimal string representation of an u24.
+ Mandatory in unit directories according to IEEE 1212.
+
+
+What: /sys/bus/firewire/drivers/sbp2/fw*/host*/target*/*:*:*:*/ieee1394_id
+ formerly
+ /sys/bus/ieee1394/drivers/sbp2/fw*/host*/target*/*:*:*:*/ieee1394_id
+Date: Feb 2004
+KernelVersion: 2.6.4
+Contact: linux1394-devel@lists.sourceforge.net
+Description:
+ SCSI target port identifier and logical unit identifier of a
+ logical unit of an SBP-2 target. The identifiers are specified
+ in SAM-2...SAM-4 annex A. They are persistent and world-wide
+ unique properties the SBP-2 attached target.
+
+ Read-only attribute, immutable during the target's lifetime.
+ Format, as exposed by firewire-sbp2 since 2.6.22, May 2007:
+ Colon-separated hexadecimal string representations of
+ u64 EUI-64 : u24 directory_ID : u16 LUN
+ without 0x prefixes, without whitespace. The former sbp2 driver
+ (removed in 2.6.37 after being superseded by firewire-sbp2) used
+ a somewhat shorter format which was not as close to SAM.
+
+Users: udev rules to create /dev/disk/by-id/ symlinks
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-nvmem b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-nvmem
new file mode 100644
index 0000000..5923ab4
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-nvmem
@@ -0,0 +1,19 @@
+What: /sys/bus/nvmem/devices/.../nvmem
+Date: July 2015
+KernelVersion: 4.2
+Contact: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+Description:
+ This file allows user to read/write the raw NVMEM contents.
+ Permissions for write to this file depends on the nvmem
+ provider configuration.
+
+ ex:
+ hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+
+ 0000000 0000 0000 0000 0000 0000 0000 0000 0000
+ *
+ 00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
+ 0000000 0000 0000 0000 0000 0000 0000 0000 0000
+ ...
+ *
+ 0001000
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-usb b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-usb
new file mode 100644
index 0000000..b832eef
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-usb
@@ -0,0 +1,140 @@
+What: /sys/bus/usb/devices/.../power/persist
+Date: May 2007
+KernelVersion: 2.6.23
+Contact: Alan Stern <stern@rowland.harvard.edu>
+Description:
+ USB device directories can contain a file named power/persist.
+ The file holds a boolean value (0 or 1) indicating whether or
+ not the "USB-Persist" facility is enabled for the device. For
+ hubs this facility is always enabled and their device
+ directories will not contain this file.
+
+ For more information, see Documentation/driver-api/usb/persist.rst.
+
+What: /sys/bus/usb/devices/.../power/autosuspend
+Date: March 2007
+KernelVersion: 2.6.21
+Contact: Alan Stern <stern@rowland.harvard.edu>
+Description:
+ Each USB device directory will contain a file named
+ power/autosuspend. This file holds the time (in seconds)
+ the device must be idle before it will be autosuspended.
+ 0 means the device will be autosuspended as soon as
+ possible. Negative values will prevent the device from
+ being autosuspended at all, and writing a negative value
+ will resume the device if it is already suspended.
+
+ The autosuspend delay for newly-created devices is set to
+ the value of the usbcore.autosuspend module parameter.
+
+What: /sys/bus/usb/device/.../power/connected_duration
+Date: January 2008
+KernelVersion: 2.6.25
+Contact: Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+ If CONFIG_PM is enabled, then this file is present. When read,
+ it returns the total time (in msec) that the USB device has been
+ connected to the machine. This file is read-only.
+Users:
+ PowerTOP <powertop@lists.01.org>
+ https://01.org/powertop/
+
+What: /sys/bus/usb/device/.../power/active_duration
+Date: January 2008
+KernelVersion: 2.6.25
+Contact: Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+ If CONFIG_PM is enabled, then this file is present. When read,
+ it returns the total time (in msec) that the USB device has been
+ active, i.e. not in a suspended state. This file is read-only.
+
+ Tools can use this file and the connected_duration file to
+ compute the percentage of time that a device has been active.
+ For example,
+ echo $((100 * `cat active_duration` / `cat connected_duration`))
+ will give an integer percentage. Note that this does not
+ account for counter wrap.
+Users:
+ PowerTOP <powertop@lists.01.org>
+ https://01.org/powertop/
+
+What: /sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend
+Date: January 2008
+KernelVersion: 2.6.27
+Contact: Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+ When read, this file returns 1 if the interface driver
+ for this interface supports autosuspend. It also
+ returns 1 if no driver has claimed this interface, as an
+ unclaimed interface will not stop the device from being
+ autosuspended if all other interface drivers are idle.
+ The file returns 0 if autosuspend support has not been
+ added to the driver.
+Users:
+ USB PM tool
+ git://git.moblin.org/users/sarah/usb-pm-tool/
+
+What: /sys/bus/usb/device/.../avoid_reset_quirk
+Date: December 2009
+Contact: Oliver Neukum <oliver@neukum.org>
+Description:
+ Writing 1 to this file tells the kernel that this
+ device will morph into another mode when it is reset.
+ Drivers will not use reset for error handling for
+ such devices.
+Users:
+ usb_modeswitch
+
+What: /sys/bus/usb/devices/.../devnum
+KernelVersion: since at least 2.6.18
+Description:
+ Device address on the USB bus.
+Users:
+ libusb
+
+What: /sys/bus/usb/devices/.../bConfigurationValue
+KernelVersion: since at least 2.6.18
+Description:
+ bConfigurationValue of the *active* configuration for the
+ device. Writing 0 or -1 to bConfigurationValue will reset the
+ active configuration (unconfigure the device). Writing
+ another value will change the active configuration.
+
+ Note that some devices, in violation of the USB spec, have a
+ configuration with a value equal to 0. Writing 0 to
+ bConfigurationValue for these devices will install that
+ configuration, rather then unconfigure the device.
+
+ Writing -1 will always unconfigure the device.
+Users:
+ libusb
+
+What: /sys/bus/usb/devices/.../busnum
+KernelVersion: 2.6.22
+Description:
+ Bus-number of the USB-bus the device is connected to.
+Users:
+ libusb
+
+What: /sys/bus/usb/devices/.../descriptors
+KernelVersion: 2.6.26
+Description:
+ Binary file containing cached descriptors of the device. The
+ binary data consists of the device descriptor followed by the
+ descriptors for each configuration of the device.
+ Note that the wTotalLength of the config descriptors can not
+ be trusted, as the device may have a smaller config descriptor
+ than it advertises. The bLength field of each (sub) descriptor
+ can be trusted, and can be used to seek forward one (sub)
+ descriptor at a time until the next config descriptor is found.
+ All descriptors read from this file are in bus-endian format
+Users:
+ libusb
+
+What: /sys/bus/usb/devices/.../speed
+KernelVersion: since at least 2.6.18
+Description:
+ Speed the device is connected with to the usb-host in
+ Mbit / second. IE one of 1.5 / 12 / 480 / 5000.
+Users:
+ libusb
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-vmbus b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-vmbus
new file mode 100644
index 0000000..5d0125f
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-vmbus
@@ -0,0 +1,43 @@
+What: /sys/bus/vmbus/devices/vmbus_*/id
+Date: Jul 2009
+KernelVersion: 2.6.31
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The VMBus child_relid of the device's primary channel
+Users: tools/hv/lsvmbus
+
+What: /sys/bus/vmbus/devices/vmbus_*/class_id
+Date: Jul 2009
+KernelVersion: 2.6.31
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The VMBus interface type GUID of the device
+Users: tools/hv/lsvmbus
+
+What: /sys/bus/vmbus/devices/vmbus_*/device_id
+Date: Jul 2009
+KernelVersion: 2.6.31
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The VMBus interface instance GUID of the device
+Users: tools/hv/lsvmbus
+
+What: /sys/bus/vmbus/devices/vmbus_*/channel_vp_mapping
+Date: Jul 2015
+KernelVersion: 4.2.0
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The mapping of which primary/sub channels are bound to which
+ Virtual Processors.
+ Format: <channel's child_relid:the bound cpu's number>
+Users: tools/hv/lsvmbus
+
+What: /sys/bus/vmbus/devices/vmbus_*/device
+Date: Dec. 2015
+KernelVersion: 4.5
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The 16 bit device ID of the device
+Users: tools/hv/lsvmbus and user level RDMA libraries
+
+What: /sys/bus/vmbus/devices/vmbus_*/vendor
+Date: Dec. 2015
+KernelVersion: 4.5
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The 16 bit vendor ID of the device
+Users: tools/hv/lsvmbus and user level RDMA libraries
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-w1 b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-w1
new file mode 100644
index 0000000..140d85b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-w1
@@ -0,0 +1,11 @@
+What: /sys/bus/w1/devices/.../w1_master_timeout_us
+Date: April 2015
+Contact: Dmitry Khromov <dk@icelogic.net>
+Description: Bus scanning interval, microseconds component.
+ Some of 1-Wire devices commonly associated with physical access
+ control systems are attached/generate presence for as short as
+ 100 ms - hence the tens-to-hundreds milliseconds scan intervals
+ are required.
+ see Documentation/w1/w1.generic for detailed information.
+Users: any user space application which wants to know bus scanning
+ interval
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-xen-backend b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-xen-backend
new file mode 100644
index 0000000..3d5951c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-xen-backend
@@ -0,0 +1,75 @@
+What: /sys/bus/xen-backend/devices/*/devtype
+Date: Feb 2009
+KernelVersion: 2.6.38
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ The type of the device. e.g., one of: 'vbd' (block),
+ 'vif' (network), or 'vfb' (framebuffer).
+
+What: /sys/bus/xen-backend/devices/*/nodename
+Date: Feb 2009
+KernelVersion: 2.6.38
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ XenStore node (under /local/domain/NNN/) for this
+ backend device.
+
+What: /sys/bus/xen-backend/devices/vbd-*/physical_device
+Date: April 2011
+KernelVersion: 3.0
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ The major:minor number (in hexidecimal) of the
+ physical device providing the storage for this backend
+ block device.
+
+What: /sys/bus/xen-backend/devices/vbd-*/mode
+Date: April 2011
+KernelVersion: 3.0
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Whether the block device is read-only ('r') or
+ read-write ('w').
+
+What: /sys/bus/xen-backend/devices/vbd-*/statistics/f_req
+Date: April 2011
+KernelVersion: 3.0
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Number of flush requests from the frontend.
+
+What: /sys/bus/xen-backend/devices/vbd-*/statistics/oo_req
+Date: April 2011
+KernelVersion: 3.0
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Number of requests delayed because the backend was too
+ busy processing previous requests.
+
+What: /sys/bus/xen-backend/devices/vbd-*/statistics/rd_req
+Date: April 2011
+KernelVersion: 3.0
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Number of read requests from the frontend.
+
+What: /sys/bus/xen-backend/devices/vbd-*/statistics/rd_sect
+Date: April 2011
+KernelVersion: 3.0
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Number of sectors read by the frontend.
+
+What: /sys/bus/xen-backend/devices/vbd-*/statistics/wr_req
+Date: April 2011
+KernelVersion: 3.0
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Number of write requests from the frontend.
+
+What: /sys/bus/xen-backend/devices/vbd-*/statistics/wr_sect
+Date: April 2011
+KernelVersion: 3.0
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Number of sectors written by the frontend.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-backlight b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-backlight
new file mode 100644
index 0000000..70302f3
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-backlight
@@ -0,0 +1,56 @@
+What: /sys/class/backlight/<backlight>/bl_power
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Control BACKLIGHT power, values are FB_BLANK_* from fb.h
+ - FB_BLANK_UNBLANK (0) : power on.
+ - FB_BLANK_POWERDOWN (4) : power off
+Users: HAL
+
+What: /sys/class/backlight/<backlight>/brightness
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Control the brightness for this <backlight>. Values
+ are between 0 and max_brightness. This file will also
+ show the brightness level stored in the driver, which
+ may not be the actual brightness (see actual_brightness).
+Users: HAL
+
+What: /sys/class/backlight/<backlight>/actual_brightness
+Date: March 2006
+KernelVersion: 2.6.17
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Show the actual brightness by querying the hardware.
+Users: HAL
+
+What: /sys/class/backlight/<backlight>/max_brightness
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Maximum brightness for <backlight>.
+Users: HAL
+
+What: /sys/class/backlight/<backlight>/type
+Date: September 2010
+KernelVersion: 2.6.37
+Contact: Matthew Garrett <mjg@redhat.com>
+Description:
+ The type of interface controlled by <backlight>.
+ "firmware": The driver uses a standard firmware interface
+ "platform": The driver uses a platform-specific interface
+ "raw": The driver controls hardware registers directly
+
+ In the general case, when multiple backlight
+ interfaces are available for a single device, firmware
+ control should be preferred to platform control should
+ be preferred to raw control. Using a firmware
+ interface reduces the probability of confusion with
+ the hardware and the OS independently updating the
+ backlight state. Platform interfaces are mostly a
+ holdover from pre-standardisation of firmware
+ interfaces.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-rfkill b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-rfkill
new file mode 100644
index 0000000..e1ba4a1
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-rfkill
@@ -0,0 +1,88 @@
+rfkill - radio frequency (RF) connector kill switch support
+
+For details to this subsystem look at Documentation/rfkill.txt.
+
+For the deprecated /sys/class/rfkill/*/claim knobs of this interface look in
+Documentation/ABI/removed/sysfs-class-rfkill.
+
+What: /sys/class/rfkill
+Date: 09-Jul-2007
+KernelVersion: v2.6.22
+Contact: linux-wireless@vger.kernel.org,
+Description: The rfkill class subsystem folder.
+ Each registered rfkill driver is represented by an rfkillX
+ subfolder (X being an integer > 0).
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/name
+Date: 09-Jul-2007
+KernelVersion v2.6.22
+Contact: linux-wireless@vger.kernel.org
+Description: Name assigned by driver to this key (interface or driver name).
+Values: arbitrary string.
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/type
+Date: 09-Jul-2007
+KernelVersion v2.6.22
+Contact: linux-wireless@vger.kernel.org
+Description: Driver type string ("wlan", "bluetooth", etc).
+Values: See include/linux/rfkill.h.
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/persistent
+Date: 09-Jul-2007
+KernelVersion v2.6.22
+Contact: linux-wireless@vger.kernel.org
+Description: Whether the soft blocked state is initialised from non-volatile
+ storage at startup.
+Values: A numeric value.
+ 0: false
+ 1: true
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/state
+Date: 09-Jul-2007
+KernelVersion v2.6.22
+Contact: linux-wireless@vger.kernel.org
+Description: Current state of the transmitter.
+ This file was scheduled to be removed in 2014, but due to its
+ large number of users it will be sticking around for a bit
+ longer. Despite it being marked as stabe, the newer "hard" and
+ "soft" interfaces should be preffered, since it is not possible
+ to express the 'soft and hard block' state of the rfkill driver
+ through this interface. There will likely be another attempt to
+ remove it in the future.
+Values: A numeric value.
+ 0: RFKILL_STATE_SOFT_BLOCKED
+ transmitter is turned off by software
+ 1: RFKILL_STATE_UNBLOCKED
+ transmitter is (potentially) active
+ 2: RFKILL_STATE_HARD_BLOCKED
+ transmitter is forced off by something outside of
+ the driver's control.
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/hard
+Date: 12-March-2010
+KernelVersion v2.6.34
+Contact: linux-wireless@vger.kernel.org
+Description: Current hardblock state. This file is read only.
+Values: A numeric value.
+ 0: inactive
+ The transmitter is (potentially) active.
+ 1: active
+ The transmitter is forced off by something outside of
+ the driver's control.
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/soft
+Date: 12-March-2010
+KernelVersion v2.6.34
+Contact: linux-wireless@vger.kernel.org
+Description: Current softblock state. This file is read and write.
+Values: A numeric value.
+ 0: inactive
+ The transmitter is (potentially) active.
+ 1: active
+ The transmitter is turned off by software.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-tpm b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-tpm
new file mode 100644
index 0000000..c0e2383
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-tpm
@@ -0,0 +1,185 @@
+What: /sys/class/tpm/tpmX/device/
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: tpmdd-devel@lists.sf.net
+Description: The device/ directory under a specific TPM instance exposes
+ the properties of that TPM chip
+
+
+What: /sys/class/tpm/tpmX/device/active
+Date: April 2006
+KernelVersion: 2.6.17
+Contact: tpmdd-devel@lists.sf.net
+Description: The "active" property prints a '1' if the TPM chip is accepting
+ commands. An inactive TPM chip still contains all the state of
+ an active chip (Storage Root Key, NVRAM, etc), and can be
+ visible to the OS, but will only accept a restricted set of
+ commands. See the TPM Main Specification part 2, Structures,
+ section 17 for more information on which commands are
+ available.
+
+What: /sys/class/tpm/tpmX/device/cancel
+Date: June 2005
+KernelVersion: 2.6.13
+Contact: tpmdd-devel@lists.sf.net
+Description: The "cancel" property allows you to cancel the currently
+ pending TPM command. Writing any value to cancel will call the
+ TPM vendor specific cancel operation.
+
+What: /sys/class/tpm/tpmX/device/caps
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: tpmdd-devel@lists.sf.net
+Description: The "caps" property contains TPM manufacturer and version info.
+
+ Example output:
+
+ Manufacturer: 0x53544d20
+ TCG version: 1.2
+ Firmware version: 8.16
+
+ Manufacturer is a hex dump of the 4 byte manufacturer info
+ space in a TPM. TCG version shows the TCG TPM spec level that
+ the chip supports. Firmware version is that of the chip and
+ is manufacturer specific.
+
+What: /sys/class/tpm/tpmX/device/durations
+Date: March 2011
+KernelVersion: 3.1
+Contact: tpmdd-devel@lists.sf.net
+Description: The "durations" property shows the 3 vendor-specific values
+ used to wait for a short, medium and long TPM command. All
+ TPM commands are categorized as short, medium or long in
+ execution time, so that the driver doesn't have to wait
+ any longer than necessary before starting to poll for a
+ result.
+
+ Example output:
+
+ 3015000 4508000 180995000 [original]
+
+ Here the short, medium and long durations are displayed in
+ usecs. "[original]" indicates that the values are displayed
+ unmodified from when they were queried from the chip.
+ Durations can be modified in the case where a buggy chip
+ reports them in msec instead of usec and they need to be
+ scaled to be displayed in usecs. In this case "[adjusted]"
+ will be displayed in place of "[original]".
+
+What: /sys/class/tpm/tpmX/device/enabled
+Date: April 2006
+KernelVersion: 2.6.17
+Contact: tpmdd-devel@lists.sf.net
+Description: The "enabled" property prints a '1' if the TPM chip is enabled,
+ meaning that it should be visible to the OS. This property
+ may be visible but produce a '0' after some operation that
+ disables the TPM.
+
+What: /sys/class/tpm/tpmX/device/owned
+Date: April 2006
+KernelVersion: 2.6.17
+Contact: tpmdd-devel@lists.sf.net
+Description: The "owned" property produces a '1' if the TPM_TakeOwnership
+ ordinal has been executed successfully in the chip. A '0'
+ indicates that ownership hasn't been taken.
+
+What: /sys/class/tpm/tpmX/device/pcrs
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: tpmdd-devel@lists.sf.net
+Description: The "pcrs" property will dump the current value of all Platform
+ Configuration Registers in the TPM. Note that since these
+ values may be constantly changing, the output is only valid
+ for a snapshot in time.
+
+ Example output:
+
+ PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+ PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+ PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+ PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+ PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+ ...
+
+ The number of PCRs and hex bytes needed to represent a PCR
+ value will vary depending on TPM chip version. For TPM 1.1 and
+ 1.2 chips, PCRs represent SHA-1 hashes, which are 20 bytes
+ long. Use the "caps" property to determine TPM version.
+
+What: /sys/class/tpm/tpmX/device/pubek
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: tpmdd-devel@lists.sf.net
+Description: The "pubek" property will return the TPM's public endorsement
+ key if possible. If the TPM has had ownership established and
+ is version 1.2, the pubek will not be available without the
+ owner's authorization. Since the TPM driver doesn't store any
+ secrets, it can't authorize its own request for the pubek,
+ making it unaccessible. The public endorsement key is gener-
+ ated at TPM manufacture time and exists for the life of the
+ chip.
+
+ Example output:
+
+ Algorithm: 00 00 00 01
+ Encscheme: 00 03
+ Sigscheme: 00 01
+ Parameters: 00 00 08 00 00 00 00 02 00 00 00 00
+ Modulus length: 256
+ Modulus:
+ B4 76 41 82 C9 20 2C 10 18 40 BC 8B E5 44 4C 6C
+ 3A B2 92 0C A4 9B 2A 83 EB 5C 12 85 04 48 A0 B6
+ 1E E4 81 84 CE B2 F2 45 1C F0 85 99 61 02 4D EB
+ 86 C4 F7 F3 29 60 52 93 6B B2 E5 AB 8B A9 09 E3
+ D7 0E 7D CA 41 BF 43 07 65 86 3C 8C 13 7A D0 8B
+ 82 5E 96 0B F8 1F 5F 34 06 DA A2 52 C1 A9 D5 26
+ 0F F4 04 4B D9 3F 2D F2 AC 2F 74 64 1F 8B CD 3E
+ 1E 30 38 6C 70 63 69 AB E2 50 DF 49 05 2E E1 8D
+ 6F 78 44 DA 57 43 69 EE 76 6C 38 8A E9 8E A3 F0
+ A7 1F 3C A8 D0 12 15 3E CA 0E BD FA 24 CD 33 C6
+ 47 AE A4 18 83 8E 22 39 75 93 86 E6 FD 66 48 B6
+ 10 AD 94 14 65 F9 6A 17 78 BD 16 53 84 30 BF 70
+ E0 DC 65 FD 3C C6 B0 1E BF B9 C1 B5 6C EF B1 3A
+ F8 28 05 83 62 26 11 DC B4 6B 5A 97 FF 32 26 B6
+ F7 02 71 CF 15 AE 16 DD D1 C1 8E A8 CF 9B 50 7B
+ C3 91 FF 44 1E CF 7C 39 FE 17 77 21 20 BD CE 9B
+
+ Possible values:
+
+ Algorithm: TPM_ALG_RSA (1)
+ Encscheme: TPM_ES_RSAESPKCSv15 (2)
+ TPM_ES_RSAESOAEP_SHA1_MGF1 (3)
+ Sigscheme: TPM_SS_NONE (1)
+ Parameters, a byte string of 3 u32 values:
+ Key Length (bits): 00 00 08 00 (2048)
+ Num primes: 00 00 00 02 (2)
+ Exponent Size: 00 00 00 00 (0 means the
+ default exp)
+ Modulus Length: 256 (bytes)
+ Modulus: The 256 byte Endorsement Key modulus
+
+What: /sys/class/tpm/tpmX/device/temp_deactivated
+Date: April 2006
+KernelVersion: 2.6.17
+Contact: tpmdd-devel@lists.sf.net
+Description: The "temp_deactivated" property returns a '1' if the chip has
+ been temporarily deactivated, usually until the next power
+ cycle. Whether a warm boot (reboot) will clear a TPM chip
+ from a temp_deactivated state is platform specific.
+
+What: /sys/class/tpm/tpmX/device/timeouts
+Date: March 2011
+KernelVersion: 3.1
+Contact: tpmdd-devel@lists.sf.net
+Description: The "timeouts" property shows the 4 vendor-specific values
+ for the TPM's interface spec timeouts. The use of these
+ timeouts is defined by the TPM interface spec that the chip
+ conforms to.
+
+ Example output:
+
+ 750000 750000 750000 750000 [original]
+
+ The four timeout values are shown in usecs, with a trailing
+ "[original]" or "[adjusted]" depending on whether the values
+ were scaled by the driver to be reported in usec from msecs.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-ubi b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-ubi
new file mode 100644
index 0000000..a6b3240
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-ubi
@@ -0,0 +1,221 @@
+What: /sys/class/ubi/
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ The ubi/ class sub-directory belongs to the UBI subsystem and
+ provides general UBI information, per-UBI device information
+ and per-UBI volume information.
+
+What: /sys/class/ubi/version
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ This file contains version of the latest supported UBI on-media
+ format. Currently it is 1, and there is no plan to change this.
+ However, if in the future UBI needs on-flash format changes
+ which cannot be done in a compatible manner, a new format
+ version will be added. So this is a mechanism for possible
+ future backward-compatible (but forward-incompatible)
+ improvements.
+
+What: /sys/class/ubiX/
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ The /sys/class/ubi0, /sys/class/ubi1, etc directories describe
+ UBI devices (UBI device 0, 1, etc). They contain general UBI
+ device information and per UBI volume information (each UBI
+ device may have many UBI volumes)
+
+What: /sys/class/ubi/ubiX/avail_eraseblocks
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Amount of available logical eraseblock. For example, one may
+ create a new UBI volume which has this amount of logical
+ eraseblocks.
+
+What: /sys/class/ubi/ubiX/bad_peb_count
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Count of bad physical eraseblocks on the underlying MTD device.
+
+What: /sys/class/ubi/ubiX/bgt_enabled
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Contains ASCII "0\n" if the UBI background thread is disabled,
+ and ASCII "1\n" if it is enabled.
+
+What: /sys/class/ubi/ubiX/dev
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Major and minor numbers of the character device corresponding
+ to this UBI device (in <major>:<minor> format).
+
+What: /sys/class/ubi/ubiX/eraseblock_size
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Maximum logical eraseblock size this UBI device may provide. UBI
+ volumes may have smaller logical eraseblock size because of their
+ alignment.
+
+What: /sys/class/ubi/ubiX/max_ec
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Maximum physical eraseblock erase counter value.
+
+What: /sys/class/ubi/ubiX/max_vol_count
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Maximum number of volumes which this UBI device may have.
+
+What: /sys/class/ubi/ubiX/min_io_size
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Minimum input/output unit size. All the I/O may only be done
+ in fractions of the contained number.
+
+What: /sys/class/ubi/ubiX/mtd_num
+Date: January 2008
+KernelVersion: 2.6.25
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Number of the underlying MTD device.
+
+What: /sys/class/ubi/ubiX/reserved_for_bad
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Number of physical eraseblocks reserved for bad block handling.
+
+What: /sys/class/ubi/ubiX/ro_mode
+Date: April 2016
+KernelVersion: 4.7
+Contact: linux-mtd@lists.infradead.org
+Description:
+ Contains ASCII "1\n" if the read-only flag is set on this
+ device, and "0\n" if it is cleared. UBI devices mark themselves
+ as read-only when they detect an unrecoverable error.
+
+What: /sys/class/ubi/ubiX/total_eraseblocks
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Total number of good (not marked as bad) physical eraseblocks on
+ the underlying MTD device.
+
+What: /sys/class/ubi/ubiX/volumes_count
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Count of volumes on this UBI device.
+
+What: /sys/class/ubi/ubiX/ubiX_Y/
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ The /sys/class/ubi/ubiX/ubiX_0/, /sys/class/ubi/ubiX/ubiX_1/,
+ etc directories describe UBI volumes on UBI device X (volumes
+ 0, 1, etc).
+
+What: /sys/class/ubi/ubiX/ubiX_Y/alignment
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Volume alignment - the value the logical eraseblock size of
+ this volume has to be aligned on. For example, 2048 means that
+ logical eraseblock size is multiple of 2048. In other words,
+ volume logical eraseblock size is UBI device logical eraseblock
+ size aligned to the alignment value.
+
+What: /sys/class/ubi/ubiX/ubiX_Y/corrupted
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Contains ASCII "0\n" if the UBI volume is OK, and ASCII "1\n"
+ if it is corrupted (e.g., due to an interrupted volume update).
+
+What: /sys/class/ubi/ubiX/ubiX_Y/data_bytes
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ The amount of data this volume contains. This value makes sense
+ only for static volumes, and for dynamic volume it equivalent
+ to the total volume size in bytes.
+
+What: /sys/class/ubi/ubiX/ubiX_Y/dev
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Major and minor numbers of the character device corresponding
+ to this UBI volume (in <major>:<minor> format).
+
+What: /sys/class/ubi/ubiX/ubiX_Y/name
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Volume name.
+
+What: /sys/class/ubi/ubiX/ubiX_Y/reserved_ebs
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Count of physical eraseblock reserved for this volume.
+ Equivalent to the volume size in logical eraseblocks.
+
+What: /sys/class/ubi/ubiX/ubiX_Y/type
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Volume type. Contains ASCII "dynamic\n" for dynamic volumes and
+ "static\n" for static volumes.
+
+What: /sys/class/ubi/ubiX/ubiX_Y/upd_marker
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Contains ASCII "0\n" if the update marker is not set for this
+ volume, and "1\n" if it is set. The update marker is set when
+ volume update starts, and cleaned when it ends. So the presence
+ of the update marker indicates that the volume is being updated
+ at the moment of the update was interrupted. The later may be
+ checked using the "corrupted" sysfs file.
+
+What: /sys/class/ubi/ubiX/ubiX_Y/usable_eb_size
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Logical eraseblock size of this volume. Equivalent to logical
+ eraseblock size of the device aligned on the volume alignment
+ value.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-udc b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-udc
new file mode 100644
index 0000000..d1e2f3e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-udc
@@ -0,0 +1,93 @@
+What: /sys/class/udc/<udc>/a_alt_hnp_support
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Indicates if an OTG A-Host supports HNP at an alternate port.
+Users:
+
+What: /sys/class/udc/<udc>/a_hnp_support
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Indicates if an OTG A-Host supports HNP at this port.
+Users:
+
+What: /sys/class/udc/<udc>/b_hnp_enable
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Indicates if an OTG A-Host enabled HNP support.
+Users:
+
+What: /sys/class/udc/<udc>/current_speed
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Indicates the current negotiated speed at this port.
+Users:
+
+What: /sys/class/udc/<udc>/is_a_peripheral
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Indicates that this port is the default Host on an OTG session
+ but HNP was used to switch roles.
+Users:
+
+What: /sys/class/udc/<udc>/is_otg
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Indicates that this port support OTG.
+Users:
+
+What: /sys/class/udc/<udc>/maximum_speed
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Indicates the maximum USB speed supported by this port.
+Users:
+
+What: /sys/class/udc/<udc>/soft_connect
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Allows users to disconnect data pullup resistors thus causing a
+ logical disconnection from the USB Host.
+Users:
+
+What: /sys/class/udc/<udc>/srp
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Allows users to manually start Session Request Protocol.
+Users:
+
+What: /sys/class/udc/<udc>/state
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Indicates current state of the USB Device Controller. Valid
+ states are: 'not-attached', 'attached', 'powered',
+ 'reconnecting', 'unauthenticated', 'default', 'addressed',
+ 'configured', and 'suspended'; however not all USB Device
+ Controllers support reporting all states.
+Users:
+
+What: /sys/class/udc/<udc>/function
+Date: June 2017
+KernelVersion: 4.13
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Prints out name of currently running USB Gadget Driver.
+Users:
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices
new file mode 100644
index 0000000..35c457f
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices
@@ -0,0 +1,24 @@
+# Note: This documents additional properties of any device beyond what
+# is documented in Documentation/sysfs-rules.txt
+
+What: /sys/devices/*/of_node
+Date: February 2015
+Contact: Device Tree mailing list <devicetree@vger.kernel.org>
+Description:
+ Any device associated with a device-tree node will have
+ an of_path symlink pointing to the corresponding device
+ node in /sys/firmware/devicetree/
+
+What: /sys/devices/*/devspec
+Date: October 2016
+Contact: Device Tree mailing list <devicetree@vger.kernel.org>
+Description:
+ If CONFIG_OF is enabled, then this file is present. When
+ read, it returns full name of the device node.
+
+What: /sys/devices/*/obppath
+Date: October 2016
+Contact: Device Tree mailing list <devicetree@vger.kernel.org>
+Description:
+ If CONFIG_OF is enabled, then this file is present. When
+ read, it returns full name of the device node.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-node b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-node
new file mode 100644
index 0000000..5b2d0f0
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-node
@@ -0,0 +1,93 @@
+What: /sys/devices/system/node/possible
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ Nodes that could be possibly become online at some point.
+
+What: /sys/devices/system/node/online
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ Nodes that are online.
+
+What: /sys/devices/system/node/has_normal_memory
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ Nodes that have regular memory.
+
+What: /sys/devices/system/node/has_cpu
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ Nodes that have one or more CPUs.
+
+What: /sys/devices/system/node/has_high_memory
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ Nodes that have regular or high memory.
+ Depends on CONFIG_HIGHMEM.
+
+What: /sys/devices/system/node/nodeX
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ When CONFIG_NUMA is enabled, this is a directory containing
+ information on node X such as what CPUs are local to the
+ node. Each file is detailed next.
+
+What: /sys/devices/system/node/nodeX/cpumap
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ The node's cpumap.
+
+What: /sys/devices/system/node/nodeX/cpulist
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ The CPUs associated to the node.
+
+What: /sys/devices/system/node/nodeX/meminfo
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ Provides information about the node's distribution and memory
+ utilization. Similar to /proc/meminfo, see Documentation/filesystems/proc.txt
+
+What: /sys/devices/system/node/nodeX/numastat
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ The node's hit/miss statistics, in units of pages.
+ See Documentation/numastat.txt
+
+What: /sys/devices/system/node/nodeX/distance
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ Distance between the node and all the other nodes
+ in the system.
+
+What: /sys/devices/system/node/nodeX/vmstat
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ The node's zoned virtual memory statistics.
+ This is a superset of numastat.
+
+What: /sys/devices/system/node/nodeX/compact
+Date: February 2010
+Contact: Mel Gorman <mel@csn.ul.ie>
+Description:
+ When this file is written to, all memory within that node
+ will be compacted. When it completes, memory will be freed
+ into blocks which have as many contiguous pages as possible
+
+What: /sys/devices/system/node/nodeX/hugepages/hugepages-<size>/
+Date: December 2009
+Contact: Lee Schermerhorn <lee.schermerhorn@hp.com>
+Description:
+ The node's huge page size control/query attributes.
+ See Documentation/vm/hugetlbpage.txt
\ No newline at end of file
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-system-cpu b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-system-cpu
new file mode 100644
index 0000000..33c133e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-system-cpu
@@ -0,0 +1,25 @@
+What: /sys/devices/system/cpu/dscr_default
+Date: 13-May-2014
+KernelVersion: v3.15.0
+Contact:
+Description: Writes are equivalent to writing to
+ /sys/devices/system/cpu/cpuN/dscr on all CPUs.
+ Reads return the last written value or 0.
+ This value is not a global default: it is a way to set
+ all per-CPU defaults at the same time.
+Values: 64 bit unsigned integer (bit field)
+
+What: /sys/devices/system/cpu/cpu[0-9]+/dscr
+Date: 13-May-2014
+KernelVersion: v3.15.0
+Contact:
+Description: Default value for the Data Stream Control Register (DSCR) on
+ a CPU.
+ This default value is used when the kernel is executing and
+ for any process that has not set the DSCR itself.
+ If a process ever sets the DSCR (via direct access to the
+ SPR) that value will be persisted for that process and used
+ on any CPU where it executes (overriding the value described
+ here).
+ If set by a process it will be inherited by child processes.
+Values: 64 bit unsigned integer (bit field)
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-system-xen_memory b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-system-xen_memory
new file mode 100644
index 0000000..caa311d
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-system-xen_memory
@@ -0,0 +1,77 @@
+What: /sys/devices/system/xen_memory/xen_memory0/max_retry_count
+Date: May 2011
+KernelVersion: 2.6.39
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ The maximum number of times the balloon driver will
+ attempt to increase the balloon before giving up. See
+ also 'retry_count' below.
+ A value of zero means retry forever and is the default one.
+
+What: /sys/devices/system/xen_memory/xen_memory0/max_schedule_delay
+Date: May 2011
+KernelVersion: 2.6.39
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ The limit that 'schedule_delay' (see below) will be
+ increased to. The default value is 32 seconds.
+
+What: /sys/devices/system/xen_memory/xen_memory0/retry_count
+Date: May 2011
+KernelVersion: 2.6.39
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ The current number of times that the balloon driver
+ has attempted to increase the size of the balloon.
+ The default value is one. With max_retry_count being
+ zero (unlimited), this means that the driver will attempt
+ to retry with a 'schedule_delay' delay.
+
+What: /sys/devices/system/xen_memory/xen_memory0/schedule_delay
+Date: May 2011
+KernelVersion: 2.6.39
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ The time (in seconds) to wait between attempts to
+ increase the balloon. Each time the balloon cannot be
+ increased, 'schedule_delay' is increased (until
+ 'max_schedule_delay' is reached at which point it
+ will use the max value).
+
+What: /sys/devices/system/xen_memory/xen_memory0/target
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ The target number of pages to adjust this domain's
+ memory reservation to.
+
+What: /sys/devices/system/xen_memory/xen_memory0/target_kb
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ As target above, except the value is in KiB.
+
+What: /sys/devices/system/xen_memory/xen_memory0/info/current_kb
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Current size (in KiB) of this domain's memory
+ reservation.
+
+What: /sys/devices/system/xen_memory/xen_memory0/info/high_kb
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Amount (in KiB) of high memory in the balloon.
+
+What: /sys/devices/system/xen_memory/xen_memory0/info/low_kb
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Amount (in KiB) of low (or normal) memory in the
+ balloon.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-aspeed-vuart b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
new file mode 100644
index 0000000..8062953
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
@@ -0,0 +1,15 @@
+What: /sys/bus/platform/drivers/aspeed-vuart/*/lpc_address
+Date: April 2017
+Contact: Jeremy Kerr <jk@ozlabs.org>
+Description: Configures which IO port the host side of the UART
+ will appear on the host <-> BMC LPC bus.
+Users: OpenBMC. Proposed changes should be mailed to
+ openbmc@lists.ozlabs.org
+
+What: /sys/bus/platform/drivers/aspeed-vuart*/sirq
+Date: April 2017
+Contact: Jeremy Kerr <jk@ozlabs.org>
+Description: Configures which interrupt number the host side of
+ the UART will appear on the host <-> BMC LPC bus.
+Users: OpenBMC. Proposed changes should be mailed to
+ openbmc@lists.ozlabs.org
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-dma-ioatdma b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-dma-ioatdma
new file mode 100644
index 0000000..420c1d0
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-dma-ioatdma
@@ -0,0 +1,30 @@
+What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/cap
+Date: December 3, 2009
+KernelVersion: 2.6.32
+Contact: dmaengine@vger.kernel.org
+Description: Capabilities the DMA supports.Currently there are DMA_PQ, DMA_PQ_VAL,
+ DMA_XOR,DMA_XOR_VAL,DMA_INTERRUPT.
+
+What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_active
+Date: December 3, 2009
+KernelVersion: 2.6.32
+Contact: dmaengine@vger.kernel.org
+Description: The number of descriptors active in the ring.
+
+What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_size
+Date: December 3, 2009
+KernelVersion: 2.6.32
+Contact: dmaengine@vger.kernel.org
+Description: Descriptor ring size, total number of descriptors available.
+
+What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/version
+Date: December 3, 2009
+KernelVersion: 2.6.32
+Contact: dmaengine@vger.kernel.org
+Description: Version of ioatdma device.
+
+What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/intr_coalesce
+Date: August 8, 2017
+KernelVersion: 4.14
+Contact: dmaengine@vger.kernel.org
+Description: Tune-able interrupt delay value per channel basis.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-ib_srp b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-ib_srp
new file mode 100644
index 0000000..7049a2b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-ib_srp
@@ -0,0 +1,189 @@
+What: /sys/class/infiniband_srp/srp-<hca>-<port_number>/add_target
+Date: January 2, 2006
+KernelVersion: 2.6.15
+Contact: linux-rdma@vger.kernel.org
+Description: Interface for making ib_srp connect to a new target.
+ One can request ib_srp to connect to a new target by writing
+ a comma-separated list of login parameters to this sysfs
+ attribute. The supported parameters are:
+ * id_ext, a 16-digit hexadecimal number specifying the eight
+ byte identifier extension in the 16-byte SRP target port
+ identifier. The target port identifier is sent by ib_srp
+ to the target in the SRP_LOGIN_REQ request.
+ * ioc_guid, a 16-digit hexadecimal number specifying the eight
+ byte I/O controller GUID portion of the 16-byte target port
+ identifier.
+ * dgid, a 32-digit hexadecimal number specifying the
+ destination GID.
+ * pkey, a four-digit hexadecimal number specifying the
+ InfiniBand partition key.
+ * service_id, a 16-digit hexadecimal number specifying the
+ InfiniBand service ID used to establish communication with
+ the SRP target. How to find out the value of the service ID
+ is specified in the documentation of the SRP target.
+ * max_sect, a decimal number specifying the maximum number of
+ 512-byte sectors to be transferred via a single SCSI command.
+ * max_cmd_per_lun, a decimal number specifying the maximum
+ number of outstanding commands for a single LUN.
+ * io_class, a hexadecimal number specifying the SRP I/O class.
+ Must be either 0xff00 (rev 10) or 0x0100 (rev 16a). The I/O
+ class defines the format of the SRP initiator and target
+ port identifiers.
+ * initiator_ext, a 16-digit hexadecimal number specifying the
+ identifier extension portion of the SRP initiator port
+ identifier. This data is sent by the initiator to the target
+ in the SRP_LOGIN_REQ request.
+ * cmd_sg_entries, a number in the range 1..255 that specifies
+ the maximum number of data buffer descriptors stored in the
+ SRP_CMD information unit itself. With allow_ext_sg=0 the
+ parameter cmd_sg_entries defines the maximum S/G list length
+ for a single SRP_CMD, and commands whose S/G list length
+ exceeds this limit after S/G list collapsing will fail.
+ * allow_ext_sg, whether ib_srp is allowed to include a partial
+ memory descriptor list in an SRP_CMD instead of the entire
+ list. If a partial memory descriptor list has been included
+ in an SRP_CMD the remaining memory descriptors are
+ communicated from initiator to target via an additional RDMA
+ transfer. Setting allow_ext_sg to 1 increases the maximum
+ amount of data that can be transferred between initiator and
+ target via a single SCSI command. Since not all SRP target
+ implementations support partial memory descriptor lists the
+ default value for this option is 0.
+ * sg_tablesize, a number in the range 1..2048 specifying the
+ maximum S/G list length the SCSI layer is allowed to pass to
+ ib_srp. Specifying a value that exceeds cmd_sg_entries is
+ only safe with partial memory descriptor list support enabled
+ (allow_ext_sg=1).
+ * comp_vector, a number in the range 0..n-1 specifying the
+ MSI-X completion vector of the first RDMA channel. Some
+ HCA's allocate multiple (n) MSI-X vectors per HCA port. If
+ the IRQ affinity masks of these interrupts have been
+ configured such that each MSI-X interrupt is handled by a
+ different CPU then the comp_vector parameter can be used to
+ spread the SRP completion workload over multiple CPU's.
+ * tl_retry_count, a number in the range 2..7 specifying the
+ IB RC retry count.
+ * queue_size, the maximum number of commands that the
+ initiator is allowed to queue per SCSI host. The default
+ value for this parameter is 62. The lowest supported value
+ is 2.
+
+What: /sys/class/infiniband_srp/srp-<hca>-<port_number>/ibdev
+Date: January 2, 2006
+KernelVersion: 2.6.15
+Contact: linux-rdma@vger.kernel.org
+Description: HCA name (<hca>).
+
+What: /sys/class/infiniband_srp/srp-<hca>-<port_number>/port
+Date: January 2, 2006
+KernelVersion: 2.6.15
+Contact: linux-rdma@vger.kernel.org
+Description: HCA port number (<port_number>).
+
+What: /sys/class/scsi_host/host<n>/allow_ext_sg
+Date: May 19, 2011
+KernelVersion: 2.6.39
+Contact: linux-rdma@vger.kernel.org
+Description: Whether ib_srp is allowed to include a partial memory
+ descriptor list in an SRP_CMD when communicating with an SRP
+ target.
+
+What: /sys/class/scsi_host/host<n>/ch_count
+Date: April 1, 2015
+KernelVersion: 3.19
+Contact: linux-rdma@vger.kernel.org
+Description: Number of RDMA channels used for communication with the SRP
+ target.
+
+What: /sys/class/scsi_host/host<n>/cmd_sg_entries
+Date: May 19, 2011
+KernelVersion: 2.6.39
+Contact: linux-rdma@vger.kernel.org
+Description: Maximum number of data buffer descriptors that may be sent to
+ the target in a single SRP_CMD request.
+
+What: /sys/class/scsi_host/host<n>/comp_vector
+Date: September 2, 2013
+KernelVersion: 3.11
+Contact: linux-rdma@vger.kernel.org
+Description: Completion vector used for the first RDMA channel.
+
+What: /sys/class/scsi_host/host<n>/dgid
+Date: June 17, 2006
+KernelVersion: 2.6.17
+Contact: linux-rdma@vger.kernel.org
+Description: InfiniBand destination GID used for communication with the SRP
+ target. Differs from orig_dgid if port redirection has happened.
+
+What: /sys/class/scsi_host/host<n>/id_ext
+Date: June 17, 2006
+KernelVersion: 2.6.17
+Contact: linux-rdma@vger.kernel.org
+Description: Eight-byte identifier extension portion of the 16-byte target
+ port identifier.
+
+What: /sys/class/scsi_host/host<n>/ioc_guid
+Date: June 17, 2006
+KernelVersion: 2.6.17
+Contact: linux-rdma@vger.kernel.org
+Description: Eight-byte I/O controller GUID portion of the 16-byte target
+ port identifier.
+
+What: /sys/class/scsi_host/host<n>/local_ib_device
+Date: November 29, 2006
+KernelVersion: 2.6.19
+Contact: linux-rdma@vger.kernel.org
+Description: Name of the InfiniBand HCA used for communicating with the
+ SRP target.
+
+What: /sys/class/scsi_host/host<n>/local_ib_port
+Date: November 29, 2006
+KernelVersion: 2.6.19
+Contact: linux-rdma@vger.kernel.org
+Description: Number of the HCA port used for communicating with the
+ SRP target.
+
+What: /sys/class/scsi_host/host<n>/orig_dgid
+Date: June 17, 2006
+KernelVersion: 2.6.17
+Contact: linux-rdma@vger.kernel.org
+Description: InfiniBand destination GID specified in the parameters
+ written to the add_target sysfs attribute.
+
+What: /sys/class/scsi_host/host<n>/pkey
+Date: June 17, 2006
+KernelVersion: 2.6.17
+Contact: linux-rdma@vger.kernel.org
+Description: A 16-bit number representing the InfiniBand partition key used
+ for communication with the SRP target.
+
+What: /sys/class/scsi_host/host<n>/req_lim
+Date: October 20, 2010
+KernelVersion: 2.6.36
+Contact: linux-rdma@vger.kernel.org
+Description: Number of requests ib_srp can send to the target before it has
+ to wait for more credits. For more information see also the
+ SRP credit algorithm in the SRP specification.
+
+What: /sys/class/scsi_host/host<n>/service_id
+Date: June 17, 2006
+KernelVersion: 2.6.17
+Contact: linux-rdma@vger.kernel.org
+Description: InfiniBand service ID used for establishing communication with
+ the SRP target.
+
+What: /sys/class/scsi_host/host<n>/sgid
+Date: February 1, 2014
+KernelVersion: 3.13
+Contact: linux-rdma@vger.kernel.org
+Description: InfiniBand GID of the source port used for communication with
+ the SRP target.
+
+What: /sys/class/scsi_host/host<n>/zero_req_lim
+Date: September 20, 2006
+KernelVersion: 2.6.18
+Contact: linux-rdma@vger.kernel.org
+Description: Number of times the initiator had to wait before sending a
+ request to the target because it ran out of credits. For more
+ information see also the SRP credit algorithm in the SRP
+ specification.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-qla2xxx b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-qla2xxx
new file mode 100644
index 0000000..9a59d84
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-qla2xxx
@@ -0,0 +1,8 @@
+What: /sys/bus/pci/drivers/qla2xxx/.../devices/*
+Date: September 2009
+Contact: QLogic Linux Driver <linux-driver@qlogic.com>
+Description: qla2xxx-udev.sh currently looks for uevent CHANGE events to
+ signal a firmware-dump has been generated by the driver and is
+ ready for retrieval.
+Users: qla2xxx-udev.sh. Proposed changes should be mailed to
+ linux-driver@qlogic.com
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-usb-usbtmc b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
new file mode 100644
index 0000000..e960cd0
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
@@ -0,0 +1,62 @@
+What: /sys/bus/usb/drivers/usbtmc/*/interface_capabilities
+What: /sys/bus/usb/drivers/usbtmc/*/device_capabilities
+Date: August 2008
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+ These files show the various USB TMC capabilities as described
+ by the device itself. The full description of the bitfields
+ can be found in the USB TMC documents from the USB-IF entitled
+ "Universal Serial Bus Test and Measurement Class Specification
+ (USBTMC) Revision 1.0" section 4.2.1.8.
+
+ The files are read only.
+
+
+What: /sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities
+What: /sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities
+Date: August 2008
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+ These files show the various USB TMC capabilities as described
+ by the device itself. The full description of the bitfields
+ can be found in the USB TMC documents from the USB-IF entitled
+ "Universal Serial Bus Test and Measurement Class, Subclass
+ USB488 Specification (USBTMC-USB488) Revision 1.0" section
+ 4.2.2.
+
+ The files are read only.
+
+
+What: /sys/bus/usb/drivers/usbtmc/*/TermChar
+Date: August 2008
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+ This file is the TermChar value to be sent to the USB TMC
+ device as described by the document, "Universal Serial Bus Test
+ and Measurement Class Specification
+ (USBTMC) Revision 1.0" as published by the USB-IF.
+
+ Note that the TermCharEnabled file determines if this value is
+ sent to the device or not.
+
+
+What: /sys/bus/usb/drivers/usbtmc/*/TermCharEnabled
+Date: August 2008
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+ This file determines if the TermChar is to be sent to the
+ device on every transaction or not. For more details about
+ this, please see the document, "Universal Serial Bus Test and
+ Measurement Class Specification (USBTMC) Revision 1.0" as
+ published by the USB-IF.
+
+
+What: /sys/bus/usb/drivers/usbtmc/*/auto_abort
+Date: August 2008
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+ This file determines if the transaction of the USB TMC
+ device is to be automatically aborted if there is any error.
+ For more details about this, please see the document,
+ "Universal Serial Bus Test and Measurement Class Specification
+ (USBTMC) Revision 1.0" as published by the USB-IF.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-w1_ds28e04 b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-w1_ds28e04
new file mode 100644
index 0000000..26579ee
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-w1_ds28e04
@@ -0,0 +1,15 @@
+What: /sys/bus/w1/devices/.../pio
+Date: May 2012
+Contact: Markus Franke <franm@hrz.tu-chemnitz.de>
+Description: read/write the contents of the two PIO's of the DS28E04-100
+ see Documentation/w1/slaves/w1_ds28e04 for detailed information
+Users: any user space application which wants to communicate with DS28E04-100
+
+
+
+What: /sys/bus/w1/devices/.../eeprom
+Date: May 2012
+Contact: Markus Franke <franm@hrz.tu-chemnitz.de>
+Description: read/write the contents of the EEPROM memory of the DS28E04-100
+ see Documentation/w1/slaves/w1_ds28e04 for detailed information
+Users: any user space application which wants to communicate with DS28E04-100
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-w1_ds28ea00 b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-w1_ds28ea00
new file mode 100644
index 0000000..e928def
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-w1_ds28ea00
@@ -0,0 +1,6 @@
+What: /sys/bus/w1/devices/.../w1_seq
+Date: Apr 2015
+Contact: Matt Campbell <mattrcampbell@gmail.com>
+Description: Support for the DS28EA00 chain sequence function
+ see Documentation/w1/slaves/w1_therm for detailed information
+Users: any user space application which wants to communicate with DS28EA00
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-efi-vars b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-efi-vars
new file mode 100644
index 0000000..5def20b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-efi-vars
@@ -0,0 +1,75 @@
+What: /sys/firmware/efi/vars
+Date: April 2004
+Contact: Matt Domsch <Matt_Domsch@dell.com>
+Description:
+ This directory exposes interfaces for interactive with
+ EFI variables. For more information on EFI variables,
+ see 'Variable Services' in the UEFI specification
+ (section 7.2 in specification version 2.3 Errata D).
+
+ In summary, EFI variables are named, and are classified
+ into separate namespaces through the use of a vendor
+ GUID. They also have an arbitrary binary value
+ associated with them.
+
+ The efivars module enumerates these variables and
+ creates a separate directory for each one found. Each
+ directory has a name of the form "<key>-<vendor guid>"
+ and contains the following files:
+
+ attributes: A read-only text file enumerating the
+ EFI variable flags. Potential values
+ include:
+
+ EFI_VARIABLE_NON_VOLATILE
+ EFI_VARIABLE_BOOTSERVICE_ACCESS
+ EFI_VARIABLE_RUNTIME_ACCESS
+ EFI_VARIABLE_HARDWARE_ERROR_RECORD
+ EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS
+
+ See the EFI documentation for an
+ explanation of each of these variables.
+
+ data: A read-only binary file that can be read
+ to attain the value of the EFI variable
+
+ guid: The vendor GUID of the variable. This
+ should always match the GUID in the
+ variable's name.
+
+ raw_var: A binary file that can be read to obtain
+ a structure that contains everything
+ there is to know about the variable.
+ For structure definition see "struct
+ efi_variable" in the kernel sources.
+
+ This file can also be written to in
+ order to update the value of a variable.
+ For this to work however, all fields of
+ the "struct efi_variable" passed must
+ match byte for byte with the structure
+ read out of the file, save for the value
+ portion.
+
+ **Note** the efi_variable structure
+ read/written with this file contains a
+ 'long' type that may change widths
+ depending on your underlying
+ architecture.
+
+ size: As ASCII representation of the size of
+ the variable's value.
+
+
+ In addition, two other magic binary files are provided
+ in the top-level directory and are used for adding and
+ removing variables:
+
+ new_var: Takes a "struct efi_variable" and
+ instructs the EFI firmware to create a
+ new variable.
+
+ del_var: Takes a "struct efi_variable" and
+ instructs the EFI firmware to remove any
+ variable that has a matching vendor GUID
+ and variable key name.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-opal-dump b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-opal-dump
new file mode 100644
index 0000000..32fe7f5
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-opal-dump
@@ -0,0 +1,41 @@
+What: /sys/firmware/opal/dump
+Date: Feb 2014
+Contact: Stewart Smith <stewart@linux.vnet.ibm.com>
+Description:
+ This directory exposes interfaces for interacting with
+ the FSP and platform dumps through OPAL firmware interface.
+
+ This is only for the powerpc/powernv platform.
+
+ initiate_dump: When '1' is written to it,
+ we will initiate a dump.
+ Read this file for supported commands.
+
+ 0xXX-0xYYYY: A directory for dump of type 0xXX and
+ id 0xYYYY (in hex). The name of this
+ directory should not be relied upon to
+ be in this format, only that it's unique
+ among all dumps. For determining the type
+ and ID of the dump, use the id and type files.
+ Do not rely on any particular size of dump
+ type or dump id.
+
+ Each dump has the following files:
+ id: An ASCII representation of the dump ID
+ in hex (e.g. '0x01')
+ type: An ASCII representation of the type of
+ dump in the format "0x%x %s" with the ID
+ in hex and a description of the dump type
+ (or 'unknown').
+ Type '0xffffffff unknown' is used when
+ we could not get the type from firmware.
+ e.g. '0x02 System/Platform Dump'
+ dump: A binary file containing the dump.
+ The size of the dump is the size of this file.
+ acknowledge: When 'ack' is written to this, we will
+ acknowledge that we've retrieved the
+ dump to the service processor. It will
+ then remove it, making the dump
+ inaccessible.
+ Reading this file will get a list of
+ supported actions.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-opal-elog b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-opal-elog
new file mode 100644
index 0000000..2536434
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-opal-elog
@@ -0,0 +1,60 @@
+What: /sys/firmware/opal/elog
+Date: Feb 2014
+Contact: Stewart Smith <stewart@linux.vnet.ibm.com>
+Description:
+ This directory exposes error log entries retrieved
+ through the OPAL firmware interface.
+
+ Each error log is identified by a unique ID and will
+ exist until explicitly acknowledged to firmware.
+
+ Each log entry has a directory in /sys/firmware/opal/elog.
+
+ Log entries may be purged by the service processor
+ before retrieved by firmware or retrieved/acknowledged by
+ Linux if there is no room for more log entries.
+
+ In the event that Linux has retrieved the log entries
+ but not explicitly acknowledged them to firmware and
+ the service processor needs more room for log entries,
+ the only remaining copy of a log message may be in
+ Linux.
+
+ Typically, a user space daemon will monitor for new
+ entries, read them out and acknowledge them.
+
+ The service processor may be able to store more log
+ entries than firmware can, so after you acknowledge
+ an event from Linux you may instantly get another one
+ from the queue that was generated some time in the past.
+
+ The raw log format is a binary format. We currently
+ do not parse this at all in kernel, leaving it up to
+ user space to solve the problem. In future, we may
+ do more parsing in kernel and add more files to make
+ it easier for simple user space processes to extract
+ more information.
+
+ For each log entry (directory), there are the following
+ files:
+
+ id: An ASCII representation of the ID of the
+ error log, in hex - e.g. "0x01".
+
+ type: An ASCII representation of the type id and
+ description of the type of error log.
+ Currently just "0x00 PEL" - platform error log.
+ In the future there may be additional types.
+
+ raw: A read-only binary file that can be read
+ to get the raw log entry. These are
+ <16kb, often just hundreds of bytes and
+ "average" 2kb.
+
+ acknowledge: Writing 'ack' to this file will acknowledge
+ the error log to firmware (and in turn
+ the service processor, if applicable).
+ Shortly after acknowledging it, the log
+ entry will be removed from sysfs.
+ Reading this file will list the supported
+ operations (currently just acknowledge).
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-fs-orangefs b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-fs-orangefs
new file mode 100644
index 0000000..affdb11
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-fs-orangefs
@@ -0,0 +1,87 @@
+What: /sys/fs/orangefs/perf_counters/*
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Counters and settings for various caches.
+ Read only.
+
+
+What: /sys/fs/orangefs/perf_counter_reset
+Date: June 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ echo a 0 or a 1 into perf_counter_reset to
+ reset all the counters in
+ /sys/fs/orangefs/perf_counters
+ except ones with PINT_PERF_PRESERVE set.
+
+
+What: /sys/fs/orangefs/perf_time_interval_secs
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Length of perf counter intervals in
+ seconds.
+
+
+What: /sys/fs/orangefs/perf_history_size
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ The perf_counters cache statistics have N, or
+ perf_history_size, samples. The default is
+ one.
+
+ Every perf_time_interval_secs the (first)
+ samples are reset.
+
+ If N is greater than one, the "current" set
+ of samples is reset, and the samples from the
+ other N-1 intervals remain available.
+
+
+What: /sys/fs/orangefs/op_timeout_secs
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Service operation timeout in seconds.
+
+
+What: /sys/fs/orangefs/slot_timeout_secs
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ "Slot" timeout in seconds. A "slot"
+ is an indexed buffer in the shared
+ memory segment used for communication
+ between the kernel module and userspace.
+ Slots are requested and waited for,
+ the wait times out after slot_timeout_secs.
+
+
+What: /sys/fs/orangefs/acache/*
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Attribute cache configurable settings.
+
+
+What: /sys/fs/orangefs/ncache/*
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Name cache configurable settings.
+
+
+What: /sys/fs/orangefs/capcache/*
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Capability cache configurable settings.
+
+
+What: /sys/fs/orangefs/ccache/*
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Credential cache configurable settings.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-hypervisor-xen b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-hypervisor-xen
new file mode 100644
index 0000000..3cf5cdf
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-hypervisor-xen
@@ -0,0 +1,119 @@
+What: /sys/hypervisor/compilation/compile_date
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Contains the build time stamp of the Xen hypervisor
+ Might return "<denied>" in case of special security settings
+ in the hypervisor.
+
+What: /sys/hypervisor/compilation/compiled_by
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Contains information who built the Xen hypervisor
+ Might return "<denied>" in case of special security settings
+ in the hypervisor.
+
+What: /sys/hypervisor/compilation/compiler
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Compiler which was used to build the Xen hypervisor
+ Might return "<denied>" in case of special security settings
+ in the hypervisor.
+
+What: /sys/hypervisor/properties/capabilities
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Space separated list of supported guest system types. Each type
+ is in the format: <class>-<major>.<minor>-<arch>
+ With:
+ <class>: "xen" -- x86: paravirtualized, arm: standard
+ "hvm" -- x86 only: fully virtualized
+ <major>: major guest interface version
+ <minor>: minor guest interface version
+ <arch>: architecture, e.g.:
+ "x86_32": 32 bit x86 guest without PAE
+ "x86_32p": 32 bit x86 guest with PAE
+ "x86_64": 64 bit x86 guest
+ "armv7l": 32 bit arm guest
+ "aarch64": 64 bit arm guest
+
+What: /sys/hypervisor/properties/changeset
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Changeset of the hypervisor (git commit)
+ Might return "<denied>" in case of special security settings
+ in the hypervisor.
+
+What: /sys/hypervisor/properties/features
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Features the Xen hypervisor supports for the guest as defined
+ in include/xen/interface/features.h printed as a hex value.
+
+What: /sys/hypervisor/properties/pagesize
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Default page size of the hypervisor printed as a hex value.
+ Might return "0" in case of special security settings
+ in the hypervisor.
+
+What: /sys/hypervisor/properties/virtual_start
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Virtual address of the hypervisor as a hex value.
+
+What: /sys/hypervisor/type
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Type of hypervisor:
+ "xen": Xen hypervisor
+
+What: /sys/hypervisor/uuid
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ UUID of the guest as known to the Xen hypervisor.
+
+What: /sys/hypervisor/version/extra
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ The Xen version is in the format <major>.<minor><extra>
+ This is the <extra> part of it.
+ Might return "<denied>" in case of special security settings
+ in the hypervisor.
+
+What: /sys/hypervisor/version/major
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ The Xen version is in the format <major>.<minor><extra>
+ This is the <major> part of it.
+
+What: /sys/hypervisor/version/minor
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ The Xen version is in the format <major>.<minor><extra>
+ This is the <minor> part of it.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-module b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-module
new file mode 100644
index 0000000..6272ae5
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-module
@@ -0,0 +1,34 @@
+What: /sys/module
+Description:
+ The /sys/module tree consists of the following structure:
+
+ /sys/module/MODULENAME
+ The name of the module that is in the kernel. This
+ module name will always show up if the module is loaded as a
+ dynamic module. If it is built directly into the kernel, it
+ will only show up if it has a version or at least one
+ parameter.
+
+ Note: The conditions of creation in the built-in case are not
+ by design and may be removed in the future.
+
+ /sys/module/MODULENAME/parameters
+ This directory contains individual files that are each
+ individual parameters of the module that are able to be
+ changed at runtime. See the individual module
+ documentation as to the contents of these parameters and
+ what they accomplish.
+
+ Note: The individual parameter names and values are not
+ considered stable, only the fact that they will be
+ placed in this location within sysfs. See the
+ individual driver documentation for details as to the
+ stability of the different parameters.
+
+ /sys/module/MODULENAME/refcnt
+ If the module is able to be unloaded from the kernel, this file
+ will contain the current reference count of the module.
+
+ Note: If the module is built into the kernel, or if the
+ CONFIG_MODULE_UNLOAD kernel configuration value is not enabled,
+ this file will not be present.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-transport-srp b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-transport-srp
new file mode 100644
index 0000000..ec7af69
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-transport-srp
@@ -0,0 +1,58 @@
+What: /sys/class/srp_remote_ports/port-<h>:<n>/delete
+Date: June 1, 2012
+KernelVersion: 3.7
+Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description: Instructs an SRP initiator to disconnect from a target and to
+ remove all LUNs imported from that target.
+
+What: /sys/class/srp_remote_ports/port-<h>:<n>/dev_loss_tmo
+Date: February 1, 2014
+KernelVersion: 3.13
+Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description: Number of seconds the SCSI layer will wait after a transport
+ layer error has been observed before removing a target port.
+ Zero means immediate removal. Setting this attribute to "off"
+ will disable the dev_loss timer.
+
+What: /sys/class/srp_remote_ports/port-<h>:<n>/fast_io_fail_tmo
+Date: February 1, 2014
+KernelVersion: 3.13
+Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description: Number of seconds the SCSI layer will wait after a transport
+ layer error has been observed before failing I/O. Zero means
+ failing I/O immediately. Setting this attribute to "off" will
+ disable the fast_io_fail timer.
+
+What: /sys/class/srp_remote_ports/port-<h>:<n>/port_id
+Date: June 27, 2007
+KernelVersion: 2.6.24
+Contact: linux-scsi@vger.kernel.org
+Description: 16-byte local SRP port identifier in hexadecimal format. An
+ example: 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00.
+
+What: /sys/class/srp_remote_ports/port-<h>:<n>/reconnect_delay
+Date: February 1, 2014
+KernelVersion: 3.13
+Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description: Number of seconds the SCSI layer will wait after a reconnect
+ attempt failed before retrying. Setting this attribute to
+ "off" will disable time-based reconnecting.
+
+What: /sys/class/srp_remote_ports/port-<h>:<n>/roles
+Date: June 27, 2007
+KernelVersion: 2.6.24
+Contact: linux-scsi@vger.kernel.org
+Description: Role of the remote port. Either "SRP Initiator" or "SRP Target".
+
+What: /sys/class/srp_remote_ports/port-<h>:<n>/state
+Date: February 1, 2014
+KernelVersion: 3.13
+Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description: State of the transport layer used for communication with the
+ remote port. "running" if the transport layer is operational;
+ "blocked" if a transport layer error has been encountered but
+ the fast_io_fail_tmo timer has not yet fired; "fail-fast"
+ after the fast_io_fail_tmo timer has fired and before the
+ "dev_loss_tmo" timer has fired; "lost" after the
+ "dev_loss_tmo" timer has fired and before the port is finally
+ removed.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/thermal-notification b/src/kernel/linux/v4.14/Documentation/ABI/stable/thermal-notification
new file mode 100644
index 0000000..9723e8b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/thermal-notification
@@ -0,0 +1,4 @@
+What: A notification mechanism for thermal related events
+Description:
+ This interface enables notification for thermal related events.
+ The notification is in the form of a netlink event.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/vdso b/src/kernel/linux/v4.14/Documentation/ABI/stable/vdso
new file mode 100644
index 0000000..55406ec
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/vdso
@@ -0,0 +1,28 @@
+On some architectures, when the kernel loads any userspace program it
+maps an ELF DSO into that program's address space. This DSO is called
+the vDSO and it often contains useful and highly-optimized alternatives
+to real syscalls.
+
+These functions are called just like ordinary C function according to
+your platform's ABI. Call them from a sensible context. (For example,
+if you set CS on x86 to something strange, the vDSO functions are
+within their rights to crash.) In addition, if you pass a bad
+pointer to a vDSO function, you might get SIGSEGV instead of -EFAULT.
+
+To find the DSO, parse the auxiliary vector passed to the program's
+entry point. The AT_SYSINFO_EHDR entry will point to the vDSO.
+
+The vDSO uses symbol versioning; whenever you request a symbol from the
+vDSO, specify the version you are expecting.
+
+Programs that dynamically link to glibc will use the vDSO automatically.
+Otherwise, you can use the reference parser in
+tools/testing/selftests/vDSO/parse_vdso.c.
+
+Unless otherwise noted, the set of symbols with any given version and the
+ABI of those symbols is considered stable. It may vary across architectures,
+though.
+
+(As of this writing, this ABI documentation as been confirmed for x86_64.
+ The maintainers of the other vDSO-using architectures should confirm
+ that it is correct for their architecture.)