diff --git a/src/kernel/linux/v4.14/Documentation/ABI/README b/src/kernel/linux/v4.14/Documentation/ABI/README
new file mode 100644
index 0000000..3121029
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/README
@@ -0,0 +1,87 @@
+This directory attempts to document the ABI between the Linux kernel and
+userspace, and the relative stability of these interfaces.  Due to the
+everchanging nature of Linux, and the differing maturity levels, these
+interfaces should be used by userspace programs in different ways.
+
+We have four different levels of ABI stability, as shown by the four
+different subdirectories in this location.  Interfaces may change levels
+of stability according to the rules described below.
+
+The different levels of stability are:
+
+  stable/
+	This directory documents the interfaces that the developer has
+	defined to be stable.  Userspace programs are free to use these
+	interfaces with no restrictions, and backward compatibility for
+	them will be guaranteed for at least 2 years.  Most interfaces
+	(like syscalls) are expected to never change and always be
+	available.
+
+  testing/
+	This directory documents interfaces that are felt to be stable,
+	as the main development of this interface has been completed.
+	The interface can be changed to add new features, but the
+	current interface will not break by doing this, unless grave
+	errors or security problems are found in them.  Userspace
+	programs can start to rely on these interfaces, but they must be
+	aware of changes that can occur before these interfaces move to
+	be marked stable.  Programs that use these interfaces are
+	strongly encouraged to add their name to the description of
+	these interfaces, so that the kernel developers can easily
+	notify them if any changes occur (see the description of the
+	layout of the files below for details on how to do this.)
+
+  obsolete/
+  	This directory documents interfaces that are still remaining in
+	the kernel, but are marked to be removed at some later point in
+	time.  The description of the interface will document the reason
+	why it is obsolete and when it can be expected to be removed.
+
+  removed/
+	This directory contains a list of the old interfaces that have
+	been removed from the kernel.
+
+Every file in these directories will contain the following information:
+
+What:		Short description of the interface
+Date:		Date created
+KernelVersion:	Kernel version this feature first showed up in.
+Contact:	Primary contact for this interface (may be a mailing list)
+Description:	Long description of the interface and how to use it.
+Users:		All users of this interface who wish to be notified when
+		it changes.  This is very important for interfaces in
+		the "testing" stage, so that kernel developers can work
+		with userspace developers to ensure that things do not
+		break in ways that are unacceptable.  It is also
+		important to get feedback for these interfaces to make
+		sure they are working in a proper way and do not need to
+		be changed further.
+
+
+How things move between levels:
+
+Interfaces in stable may move to obsolete, as long as the proper
+notification is given.
+
+Interfaces may be removed from obsolete and the kernel as long as the
+documented amount of time has gone by.
+
+Interfaces in the testing state can move to the stable state when the
+developers feel they are finished.  They cannot be removed from the
+kernel tree without going through the obsolete state first.
+
+It's up to the developer to place their interfaces in the category they
+wish for it to start out in.
+
+
+Notable bits of non-ABI, which should not under any circumstances be considered
+stable:
+
+- Kconfig.  Userspace should not rely on the presence or absence of any
+  particular Kconfig symbol, in /proc/config.gz, in the copy of .config
+  commonly installed to /boot, or in any invocation of the kernel build
+  process.
+
+- Kernel-internal symbols.  Do not rely on the presence, absence, location, or
+  type of any kernel symbol, either in System.map files or the kernel binary
+  itself.  See Documentation/process/stable-api-nonsense.rst.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/obsolete/proc-sys-vm-nr_pdflush_threads b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/proc-sys-vm-nr_pdflush_threads
new file mode 100644
index 0000000..b0b0eeb
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/proc-sys-vm-nr_pdflush_threads
@@ -0,0 +1,5 @@
+What:		/proc/sys/vm/nr_pdflush_threads
+Date:		June 2012
+Contact:	Wanpeng Li <liwp@linux.vnet.ibm.com>
+Description: Since pdflush is replaced by per-BDI flusher, the interface of old pdflush
+             exported in /proc/sys/vm/ should be removed.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-bus-usb b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-bus-usb
new file mode 100644
index 0000000..bd096d3
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-bus-usb
@@ -0,0 +1,31 @@
+What:		/sys/bus/usb/devices/.../power/level
+Date:		March 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		Each USB device directory will contain a file named
+		power/level.  This file holds a power-level setting for
+		the device, either "on" or "auto".
+
+		"on" means that the device is not allowed to autosuspend,
+		although normal suspends for system sleep will still
+		be honored.  "auto" means the device will autosuspend
+		and autoresume in the usual manner, according to the
+		capabilities of its driver.
+
+		During normal use, devices should be left in the "auto"
+		level.  The "on" level is meant for administrative uses.
+		If you want to suspend a device immediately but leave it
+		free to wake up in response to I/O requests, you should
+		write "0" to power/autosuspend.
+
+		Device not capable of proper suspend and resume should be
+		left in the "on" level.  Although the USB spec requires
+		devices to support suspend/resume, many of them do not.
+		In fact so many don't that by default, the USB core
+		initializes all non-hub devices in the "on" level.  Some
+		drivers may change this setting when they are bound.
+
+		This file is deprecated and will be removed after 2010.
+		Use the power/control file instead; it does exactly the
+		same thing.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-arvo b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-arvo
new file mode 100644
index 0000000..55e281b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-arvo
@@ -0,0 +1,53 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/actual_profile
+Date:		Januar 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-5.
+		When read, this attribute returns the number of the actual
+		profile which is also the profile that's active on device startup.
+		When written this attribute activates the selected profile
+		immediately.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/button
+Date:		Januar 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The keyboard can store short macros with consist of 1 button with
+		several modifier keys internally.
+		When written, this file lets one set the sequence for a specific
+		button for a specific profile. Button and profile numbers are
+		included in written data. The data has to be 24 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/info
+Date:		Januar 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns some info about the device like the
+		installed firmware version.
+		The size of the data is 8 bytes in size.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/key_mask
+Date:		Januar 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The keyboard lets the user deactivate 5 certain keys like the
+		windows and application keys, to protect the user from the outcome
+		of accidentally pressing them.
+		The integer value of this attribute has bits 0-4 set depending
+		on the state of the corresponding key.
+		When read, this file returns the current state of the buttons.
+		When written, the given buttons are activated/deactivated
+		immediately.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/mode_key
+Date:		Januar 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The keyboard has a condensed layout without num-lock key.
+		Instead it uses a mode-key which activates a gaming mode where
+		the assignment of the number block changes.
+		The integer value of this attribute ranges from 0 (OFF) to 1 (ON).
+		When read, this file returns the actual state of the key.
+		When written, the key is activated/deactivated immediately.
+Users:		http://roccat.sourceforge.net
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-isku b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-isku
new file mode 100644
index 0000000..c601d0f
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-isku
@@ -0,0 +1,153 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/actual_profile
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+		When read, this attribute returns the number of the actual
+		profile. This value is persistent, so its equivalent to the
+		profile that's active when the device is powered on next time.
+		When written, this file sets the number of the startup profile
+		and the device activates this profile immediately.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/info
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		The data is 6 bytes long.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/key_mask
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one deactivate certain keys like
+		windows and application keys, to prevent accidental presses.
+		Profile number for which this settings occur is included in
+		written data. The data has to be 6 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_capslock
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		capslock key for a specific profile. Profile number is included
+		in written data. The data has to be 6 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_easyzone
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		easyzone keys for a specific profile. Profile number is included
+		in written data. The data has to be 65 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_function
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		function keys for a specific profile. Profile number is included
+		in written data. The data has to be 41 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_macro
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the macro
+		keys for a specific profile. Profile number is included in
+		written data. The data has to be 35 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_media
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the media
+		keys for a specific profile. Profile number is included in
+		written data. The data has to be 29 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_thumbster
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		thumbster keys for a specific profile. Profile number is included
+		in written data. The data has to be 23 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/last_set
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the time in secs since
+		epoch in which the last configuration took place.
+		The data has to be 20 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/light
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the backlight intensity for
+		a specific profile. Profile number is included in written data.
+		The data has to be 10 bytes long for Isku, IskuFX needs	16 bytes
+		of data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/macro
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one store macros with max 500
+		keystrokes for a specific button for a specific profile.
+		Button and profile numbers are included in written data.
+		The data has to be 2083 bytes long.
+		Before reading this file, control has to be written to select
+		which profile and key to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/reset
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one reset the device.
+		The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/control
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/talk
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one trigger easyshift functionality
+		from the host.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/talkfx
+Date:		February 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one trigger temporary color schemes
+		from the host.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus
new file mode 100644
index 0000000..545e69f
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus
@@ -0,0 +1,145 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/actual_profile
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+                When read, this attribute returns the number of the actual
+                profile. This value is persistent, so its equivalent to the
+                profile that's active when the mouse is powered on next time.
+		When written, this file sets the number of the startup profile
+		and the mouse activates this profile immediately.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/startup_profile
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+                When read, this attribute returns the number of the actual
+                profile. This value is persistent, so its equivalent to the
+                profile that's active when the mouse is powered on next time.
+		When written, this file sets the number of the startup profile
+		and the mouse activates this profile immediately.
+		Please use actual_profile, it does the same thing.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 121 means 1.21
+		This file is readonly.
+		Please read binary attribute info which contains firmware version.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/info
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 8 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/macro
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store a macro with max 500 key/button strokes
+		internally.
+		When written, this file lets one set the sequence for a specific
+		button for a specific profile. Button and profile numbers are
+		included in written data. The data has to be 2082 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 77 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 77 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_buttons instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_settings
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 43 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 43 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_settings instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/sensor
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a tracking- and a distance-control-unit. These
+		can be activated/deactivated and the lift-off distance can be
+		set. The data has to be 6 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/talk
+Date:		May 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	Used to active some easy* functions of the mouse from outside.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written a calibration process for the tracking control unit
+		can be initiated/cancelled. Also lets one read/write sensor
+		registers.
+		The data has to be 4 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu_image
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read the mouse returns a 30x30 pixel image of the
+		sampled underground. This works only in the course of a
+		calibration process initiated with tcu.
+		The returned data is 1028 bytes in size.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-konepure b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-konepure
new file mode 100644
index 0000000..41a9b7f
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-konepure
@@ -0,0 +1,105 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/actual_profile
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. actual_profile holds number of actual profile.
+		This value is persistent, so its value determines the profile
+		that's active when the mouse is powered on next time.
+		When written, the mouse activates the set profile immediately.
+		The data has to be 3 bytes long.
+		The mouse will reject invalid data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/control
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/info
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/macro
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store a macro with max 500 key/button strokes
+		internally.
+		When written, this file lets one set the sequence for a specific
+		button for a specific profile. Button and profile numbers are
+		included in written data. The data has to be 2082 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_buttons
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 59 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_settings
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 31 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/sensor
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a tracking- and a distance-control-unit. These
+		can be activated/deactivated and the lift-off distance can be
+		set. The data has to be 6 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/talk
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	Used to active some easy* functions of the mouse from outside.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written a calibration process for the tracking control unit
+		can be initiated/cancelled. Also lets one read/write sensor
+		registers.
+		The data has to be 4 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu_image
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read the mouse returns a 30x30 pixel image of the
+		sampled underground. This works only in the course of a
+		calibration process initiated with tcu.
+		The returned data is 1028 bytes in size.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus
new file mode 100644
index 0000000..ab01631
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus
@@ -0,0 +1,116 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_cpi
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-4.
+		When read, this attribute returns the number of the active
+		cpi level.
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_profile
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+		When read, this attribute returns the number of the active
+		profile.
+		When written, the mouse activates this profile immediately.
+		The profile that's active when powered down is the same that's
+		active when the mouse is powered on.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_x
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-10.
+		When read, this attribute returns the number of the actual
+		sensitivity in x direction.
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_y
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-10.
+		When read, this attribute returns the number of the actual
+		sensitivity in y direction.
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/firmware_version
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 121 means 1.21
+		This file is readonly.
+		Obsoleted by binary sysfs attribute "info".
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/info
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_buttons
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 23 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_buttons
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 23 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_buttons instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_settings
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 16 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_settings
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 16 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_settings instead.
+Users:		http://roccat.sourceforge.net
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-lua b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-lua
new file mode 100644
index 0000000..31c6c4c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-lua
@@ -0,0 +1,7 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/control
+Date:		October 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, cpi, button and light settings can be configured.
+		When read, actual cpi setting and sensor data are returned.
+		The data has to be 8 bytes long.
+Users:		http://roccat.sourceforge.net
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra
new file mode 100644
index 0000000..16020b3
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra
@@ -0,0 +1,123 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_cpi
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	It is possible to switch the cpi setting of the mouse with the
+		press of a button.
+		When read, this file returns the raw number of the actual cpi
+		setting reported by the mouse. This number has to be further
+		processed to receive the real dpi value.
+
+		VALUE DPI
+		1     400
+		2     800
+		4     1600
+
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_profile
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the number of the actual profile in
+		range 0-4.
+		This file is readonly.
+		Please use binary attribute "settings" which provides this information.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/firmware_version
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 138 means 1.38
+		This file is readonly.
+		Please use binary attribute "info" which provides this information.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/info
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 19 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 19 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_buttons instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 13 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 13 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_settings instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the settings stored in the mouse.
+		The size of the data is 3 bytes and holds information on the
+		startup_profile.
+		When written, this file lets write settings back to the mouse.
+		The data has to be 3 bytes long. The mouse will reject invalid
+		data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/startup_profile
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+                When read, this attribute returns the number of the profile
+                that's active when the mouse is powered on.
+		This file is readonly.
+		Please use binary attribute "settings" which provides this information.
+Users:		http://roccat.sourceforge.net
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-ryos b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-ryos
new file mode 100644
index 0000000..1d6a8cf
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-ryos
@@ -0,0 +1,178 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/control
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/profile
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. profile holds index of actual profile.
+		This value is persistent, so its value determines the profile
+		that's active when the device is powered on next time.
+		When written, the device activates the set profile immediately.
+		The data has to be 3 bytes long.
+		The device will reject invalid data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_primary
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the default of all keys for
+		a specific profile. Profile index is included in written data.
+		The data has to be 125 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_function
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		function keys for a specific profile. Profile index is included
+		in written data. The data has to be 95 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_macro
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the macro
+		keys for a specific profile. Profile index is included in
+		written data. The data has to be 35 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_thumbster
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		thumbster keys for a specific profile. Profile index is included
+		in written data. The data has to be 23 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_extra
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		capslock and function keys for a specific profile. Profile index
+		is included in written data. The data has to be 8 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_easyzone
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		easyzone keys for a specific profile. Profile index is included
+		in written data. The data has to be 294 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/key_mask
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one deactivate certain keys like
+		windows and application keys, to prevent accidental presses.
+		Profile index for which this settings occur is included in
+		written data. The data has to be 6 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the backlight intensity for
+		a specific profile. Profile index is included in written data.
+		This attribute is only valid for the glow and pro variant.
+		The data has to be 16 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/macro
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one store macros with max 480
+		keystrokes for a specific button for a specific profile.
+		Button and profile indexes are included in written data.
+		The data has to be 2002 bytes long.
+		Before reading this file, control has to be written to select
+		which profile and key to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/info
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		The data is 8 bytes long.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/reset
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one reset the device.
+		The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/talk
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one trigger easyshift functionality
+		from the host.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light_control
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one switch between stored and custom
+		light settings.
+		This attribute is only valid for the pro variant.
+		The data has to be 8 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/stored_lights
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set per-key lighting for different
+		layers.
+		This attribute is only valid for the pro variant.
+		The data has to be 1382 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/custom_lights
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the actual per-key lighting.
+		This attribute is only valid for the pro variant.
+		The data has to be 20 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light_macro
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set a light macro that is looped
+		whenever the device gets in dimness mode.
+		This attribute is only valid for the pro variant.
+		The data has to be 2002 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu
new file mode 100644
index 0000000..99fda67
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu
@@ -0,0 +1,77 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/buttons
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split into general settings and
+		button settings. The buttons variable holds information about
+		button layout. When written, this file lets one write the
+		respective profile buttons to the mouse. The data has to be
+		47 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/control
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/general
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split into general settings and
+		button settings. A profile holds information like resolution,
+		sensitivity and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 43 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/info
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 8 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/macro
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one store macros with max 500
+		keystrokes for a specific button for a specific profile.
+		Button and profile numbers are included in written data.
+		The data has to be 2083 bytes long.
+		Before reading this file, control has to be written to select
+		which profile and key to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/profile
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. profile holds number of actual profile.
+		This value is persistent, so its value determines the profile
+		that's active when the mouse is powered on next time.
+		When written, the mouse activates the set profile immediately.
+		The data has to be 3 bytes long.
+		The mouse will reject invalid data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/sensor
+Date:		July 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a Avago ADNS-3090 sensor.
+		This file allows reading and writing of the mouse sensors registers.
+		The data has to be 4 bytes long.
+Users:		http://roccat.sourceforge.net
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-firmware-acpi b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-firmware-acpi
new file mode 100644
index 0000000..6715a71
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-firmware-acpi
@@ -0,0 +1,8 @@
+What:		/sys/firmware/acpi/hotplug/force_remove
+Date:		Mar 2017
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		Since the force_remove is inherently broken and dangerous to
+		use for some hotplugable resources like memory (because ignoring
+		the offline failure might lead to memory corruption and crashes)
+		enabling this knob is not safe and thus unsupported.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-gpio b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-gpio
new file mode 100644
index 0000000..867c1fa
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/obsolete/sysfs-gpio
@@ -0,0 +1,30 @@
+What:		/sys/class/gpio/
+Date:		July 2008
+KernelVersion:	2.6.27
+Contact:	Linus Walleij <linusw@kernel.org>
+Description:
+
+  As a Kconfig option, individual GPIO signals may be accessed from
+  userspace.  GPIOs are only made available to userspace by an explicit
+  "export" operation.  If a given GPIO is not claimed for use by
+  kernel code, it may be exported by userspace (and unexported later).
+  Kernel code may export it for complete or partial access.
+
+  GPIOs are identified as they are inside the kernel, using integers in
+  the range 0..INT_MAX.  See Documentation/gpio.txt for more information.
+
+    /sys/class/gpio
+	/export ... asks the kernel to export a GPIO to userspace
+	/unexport ... to return a GPIO to the kernel
+	/gpioN ... for each exported GPIO #N OR
+	/<LINE-NAME> ... for a properly named GPIO line
+	    /value ... always readable, writes fail for input GPIOs
+	    /direction ... r/w as: in, out (default low); write: high, low
+	    /edge ... r/w as: none, falling, rising, both
+	/gpiochipN ... for each gpiochip; #N is its first GPIO
+	    /base ... (r/o) same as N
+	    /label ... (r/o) descriptive, not necessarily unique
+	    /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1)
+
+  This ABI is deprecated and will be removed after 2020. It is
+  replaced with the GPIO character device.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/removed/devfs b/src/kernel/linux/v4.14/Documentation/ABI/removed/devfs
new file mode 100644
index 0000000..0020c49
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/removed/devfs
@@ -0,0 +1,12 @@
+What:		devfs
+Date:		July 2005 (scheduled), finally removed in kernel v2.6.18
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+	devfs has been unmaintained for a number of years, has unfixable
+	races, contains a naming policy within the kernel that is
+	against the LSB, and can be replaced by using udev.
+	The files fs/devfs/*, include/linux/devfs_fs*.h were removed,
+	along with the assorted devfs function calls throughout the
+	kernel tree.
+
+Users:
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/removed/dv1394 b/src/kernel/linux/v4.14/Documentation/ABI/removed/dv1394
new file mode 100644
index 0000000..c2310b6
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/removed/dv1394
@@ -0,0 +1,14 @@
+What:		dv1394 (a.k.a. "OHCI-DV I/O support" for FireWire)
+Date:		May 2010 (scheduled), finally removed in kernel v2.6.37
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+	/dev/dv1394/* were character device files, one for each FireWire
+	controller and for NTSC and PAL respectively, from which DV data
+	could be received by read() or transmitted by write().  A few
+	ioctl()s allowed limited control.
+	This special-purpose interface has been superseded by libraw1394 +
+	libiec61883 which are functionally equivalent, support HDV, and
+	transparently work on top of the newer firewire kernel drivers.
+
+Users:
+	ffmpeg/libavformat (if configured for DV1394)
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/removed/ip_queue b/src/kernel/linux/v4.14/Documentation/ABI/removed/ip_queue
new file mode 100644
index 0000000..3243613
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/removed/ip_queue
@@ -0,0 +1,9 @@
+What:		ip_queue
+Date:		finally removed in kernel v3.5.0
+Contact:	Pablo Neira Ayuso <pablo@netfilter.org>
+Description:
+	ip_queue has been replaced by nfnetlink_queue which provides
+	more advanced queueing mechanism to user-space. The ip_queue
+	module was already announced to become obsolete years ago.
+
+Users:
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/removed/net_dma b/src/kernel/linux/v4.14/Documentation/ABI/removed/net_dma
new file mode 100644
index 0000000..a173aec
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/removed/net_dma
@@ -0,0 +1,8 @@
+What:		tcp_dma_copybreak sysctl
+Date:		Removed in kernel v3.13
+Contact:	Dan Williams <dan.j.williams@intel.com>
+Description:
+	Formerly the lower limit, in bytes, of the size of socket reads
+	that will be offloaded to a DMA copy engine.  Removed due to
+	coherency issues of the cpu potentially touching the buffers
+	while dma is in flight.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/removed/o2cb b/src/kernel/linux/v4.14/Documentation/ABI/removed/o2cb
new file mode 100644
index 0000000..20c91ad
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/removed/o2cb
@@ -0,0 +1,10 @@
+What:		/sys/o2cb symlink
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	ocfs2-devel@oss.oracle.com
+Description:	This is a symlink: /sys/o2cb to /sys/fs/o2cb. The symlink is
+		removed when new versions of ocfs2-tools which know to look
+		in /sys/fs/o2cb are sufficiently prevalent. Don't code new
+		software to look here, it should try /sys/fs/o2cb instead.
+Users:		ocfs2-tools. It's sufficient to mail proposed changes to
+		ocfs2-devel@oss.oracle.com.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/removed/raw1394 b/src/kernel/linux/v4.14/Documentation/ABI/removed/raw1394
new file mode 100644
index 0000000..ec333e6
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/removed/raw1394
@@ -0,0 +1,15 @@
+What:		raw1394 (a.k.a. "Raw IEEE1394 I/O support" for FireWire)
+Date:		May 2010 (scheduled), finally removed in kernel v2.6.37
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+	/dev/raw1394 was a character device file that allowed low-level
+	access to FireWire buses.  Its major drawbacks were its inability
+	to implement sensible device security policies, and its low level
+	of abstraction that required userspace clients to duplicate much
+	of the kernel's ieee1394 core functionality.
+	Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of
+	firewire-core.
+
+Users:
+	libraw1394 (works with firewire-cdev too, transparent to library ABI
+	users)
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/removed/sysfs-class-rfkill b/src/kernel/linux/v4.14/Documentation/ABI/removed/sysfs-class-rfkill
new file mode 100644
index 0000000..3ce6231
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/removed/sysfs-class-rfkill
@@ -0,0 +1,13 @@
+rfkill - radio frequency (RF) connector kill switch support
+
+For details to this subsystem look at Documentation/rfkill.txt.
+
+What:		/sys/class/rfkill/rfkill[0-9]+/claim
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description:	This file was deprecated because there no longer was a way to
+		claim just control over a single rfkill instance.
+		This file was scheduled to be removed in 2012, and was removed
+		in 2016.
+Values: 	0: Kernel handles events
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/removed/video1394 b/src/kernel/linux/v4.14/Documentation/ABI/removed/video1394
new file mode 100644
index 0000000..c39c25a
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/removed/video1394
@@ -0,0 +1,16 @@
+What:		video1394 (a.k.a. "OHCI-1394 Video support" for FireWire)
+Date:		May 2010 (scheduled), finally removed in kernel v2.6.37
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+	/dev/video1394/* were character device files, one for each FireWire
+	controller, which were used for isochronous I/O.  It was added as an
+	alternative to raw1394's isochronous I/O functionality which had
+	performance issues in its first generation.  Any video1394 user had
+	to use raw1394 + libraw1394 too because video1394 did not provide
+	asynchronous I/O for device discovery and configuration.
+	Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of
+	firewire-core.
+
+Users:
+	libdc1394 (works with firewire-cdev too, transparent to library ABI
+	users)
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/firewire-cdev b/src/kernel/linux/v4.14/Documentation/ABI/stable/firewire-cdev
new file mode 100644
index 0000000..f72ed65
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/firewire-cdev
@@ -0,0 +1,104 @@
+What:		/dev/fw[0-9]+
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		The character device files /dev/fw* are the interface between
+		firewire-core and IEEE 1394 device drivers implemented in
+		userspace.  The ioctl(2)- and read(2)-based ABI is defined and
+		documented in <linux/firewire-cdev.h>.
+
+		This ABI offers most of the features which firewire-core also
+		exposes to kernelspace IEEE 1394 drivers.
+
+		Each /dev/fw* is associated with one IEEE 1394 node, which can
+		be remote or local nodes.  Operations on a /dev/fw* file have
+		different scope:
+		  - The 1394 node which is associated with the file:
+			  - Asynchronous request transmission
+			  - Get the Configuration ROM
+			  - Query node ID
+			  - Query maximum speed of the path between this node
+			    and local node
+		  - The 1394 bus (i.e. "card") to which the node is attached to:
+			  - Isochronous stream transmission and reception
+			  - Asynchronous stream transmission and reception
+			  - Asynchronous broadcast request transmission
+			  - PHY packet transmission and reception
+			  - Allocate, reallocate, deallocate isochronous
+			    resources (channels, bandwidth) at the bus's IRM
+			  - Query node IDs of local node, root node, IRM, bus
+			    manager
+			  - Query cycle time
+			  - Bus reset initiation, bus reset event reception
+		  - All 1394 buses:
+			  - Allocation of IEEE 1212 address ranges on the local
+			    link layers, reception of inbound requests to such
+			    an address range, asynchronous response transmission
+			    to inbound requests
+			  - Addition of descriptors or directories to the local
+			    nodes' Configuration ROM
+
+		Due to the different scope of operations and in order to let
+		userland implement different access permission models, some
+		operations are restricted to /dev/fw* files that are associated
+		with a local node:
+			  - Addition of descriptors or directories to the local
+			    nodes' Configuration ROM
+			  - PHY packet transmission and reception
+
+		A /dev/fw* file remains associated with one particular node
+		during its entire life time.  Bus topology changes, and hence
+		node ID changes, are tracked by firewire-core.  ABI users do not
+		need to be aware of topology.
+
+		The following file operations are supported:
+
+		open(2)
+		Currently the only useful flags are O_RDWR.
+
+		ioctl(2)
+		Initiate various actions.  Some take immediate effect, others
+		are performed asynchronously while or after the ioctl returns.
+		See the inline documentation in <linux/firewire-cdev.h> for
+		descriptions of all ioctls.
+
+		poll(2), select(2), epoll_wait(2) etc.
+		Watch for events to become available to be read.
+
+		read(2)
+		Receive various events.  There are solicited events like
+		outbound asynchronous transaction completion or isochronous
+		buffer completion, and unsolicited events such as bus resets,
+		request reception, or PHY packet reception.  Always use a read
+		buffer which is large enough to receive the largest event that
+		could ever arrive.  See <linux/firewire-cdev.h> for descriptions
+		of all event types and for which ioctls affect reception of
+		events.
+
+		mmap(2)
+		Allocate a DMA buffer for isochronous reception or transmission
+		and map it into the process address space.  The arguments should
+		be used as follows:  addr = NULL, length = the desired buffer
+		size, i.e. number of packets times size of largest packet,
+		prot = at least PROT_READ for reception and at least PROT_WRITE
+		for transmission, flags = MAP_SHARED, fd = the handle to the
+		/dev/fw*, offset = 0.
+
+		Isochronous reception works in packet-per-buffer fashion except
+		for multichannel reception which works in buffer-fill mode.
+
+		munmap(2)
+		Unmap the isochronous I/O buffer from the process address space.
+
+		close(2)
+		Besides stopping and freeing I/O contexts that were associated
+		with the file descriptor, back out any changes to the local
+		nodes' Configuration ROM.  Deallocate isochronous channels and
+		bandwidth at the IRM that were marked for kernel-assisted
+		re- and deallocation.
+
+Users:		libraw1394
+		libdc1394
+		libhinawa
+		tools like linux-firewire-utils, fwhack, ...
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/o2cb b/src/kernel/linux/v4.14/Documentation/ABI/stable/o2cb
new file mode 100644
index 0000000..5eb1545
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/o2cb
@@ -0,0 +1,10 @@
+What:		/sys/fs/o2cb/ (was /sys/o2cb)
+Date:		Dec 2005
+KernelVersion:	2.6.16
+Contact:	ocfs2-devel@oss.oracle.com
+Description:	Ocfs2-tools looks at 'interface-revision' for versioning
+		information. Each logmask/ file controls a set of debug prints
+		and can be written into with the strings "allow", "deny", or
+		"off". Reading the file returns the current state.
+Users:		ocfs2-tools. It's sufficient to mail proposed changes to
+		ocfs2-devel@oss.oracle.com.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/syscalls b/src/kernel/linux/v4.14/Documentation/ABI/stable/syscalls
new file mode 100644
index 0000000..c3ae3e7
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/syscalls
@@ -0,0 +1,10 @@
+What:		The kernel syscall interface
+Description:
+	This interface matches much of the POSIX interface and is based
+	on it and other Unix based interfaces.  It will only be added to
+	over time, and not have things removed from it.
+
+	Note that this interface is different for every architecture
+	that Linux supports.  Please see the architecture-specific
+	documentation for details on the syscall numbers that are to be
+	mapped to each syscall.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-acpi-pmprofile b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-acpi-pmprofile
new file mode 100644
index 0000000..964c7a8
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-acpi-pmprofile
@@ -0,0 +1,22 @@
+What: 		/sys/firmware/acpi/pm_profile
+Date:		03-Nov-2011
+KernelVersion:	v3.2
+Contact:	linux-acpi@vger.kernel.org
+Description: 	The ACPI pm_profile sysfs interface exports the platform
+		power management (and performance) requirement expectations
+		as provided by BIOS. The integer value is directly passed as
+		retrieved from the FADT ACPI table.
+Values:         For possible values see ACPI specification:
+		5.2.9 Fixed ACPI Description Table (FADT)
+		Field: Preferred_PM_Profile
+
+		Currently these values are defined by spec:
+		0 Unspecified
+		1 Desktop
+		2 Mobile
+		3 Workstation
+		4 Enterprise Server
+		5 SOHO Server
+		6 Appliance PC
+		7 Performance Server
+		>7 Reserved
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-firewire b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-firewire
new file mode 100644
index 0000000..41e5a0c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-firewire
@@ -0,0 +1,133 @@
+What:		/sys/bus/firewire/devices/fw[0-9]+/
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		IEEE 1394 node device attributes.
+		Read-only.  Mutable during the node device's lifetime.
+		See IEEE 1212 for semantic definitions.
+
+		config_rom
+			Contents of the Configuration ROM register.
+			Binary attribute; an array of host-endian u32.
+
+		guid
+			The node's EUI-64 in the bus information block of
+			Configuration ROM.
+			Hexadecimal string representation of an u64.
+
+
+What:		/sys/bus/firewire/devices/fw[0-9]+/units
+Date:		June 2009
+KernelVersion:	2.6.31
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		IEEE 1394 node device attribute.
+		Read-only.  Mutable during the node device's lifetime.
+		See IEEE 1212 for semantic definitions.
+
+		units
+			Summary of all units present in an IEEE 1394 node.
+			Contains space-separated tuples of specifier_id and
+			version of each unit present in the node.  Specifier_id
+			and version are hexadecimal string representations of
+			u24 of the respective unit directory entries.
+			Specifier_id and version within each tuple are separated
+			by a colon.
+
+Users:		udev rules to set ownership and access permissions or ACLs of
+		/dev/fw[0-9]+ character device files
+
+
+What:		/sys/bus/firewire/devices/fw[0-9]+/is_local
+Date:		July 2012
+KernelVersion:	3.6
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		IEEE 1394 node device attribute.
+		Read-only and immutable.
+Values:		1: The sysfs entry represents a local node (a controller card).
+		0: The sysfs entry represents a remote node.
+
+
+What:		/sys/bus/firewire/devices/fw[0-9]+[.][0-9]+/
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		IEEE 1394 unit device attributes.
+		Read-only.  Immutable during the unit device's lifetime.
+		See IEEE 1212 for semantic definitions.
+
+		modalias
+			Same as MODALIAS in the uevent at device creation.
+
+		rom_index
+			Offset of the unit directory within the parent device's
+			(node device's) Configuration ROM, in quadlets.
+			Decimal string representation.
+
+
+What:		/sys/bus/firewire/devices/*/
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		Attributes common to IEEE 1394 node devices and unit devices.
+		Read-only.  Mutable during the node device's lifetime.
+		Immutable during the unit device's lifetime.
+		See IEEE 1212 for semantic definitions.
+
+		These attributes are only created if the root directory of an
+		IEEE 1394 node or the unit directory of an IEEE 1394 unit
+		actually contains according entries.
+
+		hardware_version
+			Hexadecimal string representation of an u24.
+
+		hardware_version_name
+			Contents of a respective textual descriptor leaf.
+
+		model
+			Hexadecimal string representation of an u24.
+
+		model_name
+			Contents of a respective textual descriptor leaf.
+
+		specifier_id
+			Hexadecimal string representation of an u24.
+			Mandatory in unit directories according to IEEE 1212.
+
+		vendor
+			Hexadecimal string representation of an u24.
+			Mandatory in the root directory according to IEEE 1212.
+
+		vendor_name
+			Contents of a respective textual descriptor leaf.
+
+		version
+			Hexadecimal string representation of an u24.
+			Mandatory in unit directories according to IEEE 1212.
+
+
+What:		/sys/bus/firewire/drivers/sbp2/fw*/host*/target*/*:*:*:*/ieee1394_id
+		formerly
+		/sys/bus/ieee1394/drivers/sbp2/fw*/host*/target*/*:*:*:*/ieee1394_id
+Date:		Feb 2004
+KernelVersion:	2.6.4
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		SCSI target port identifier and logical unit identifier of a
+		logical unit of an SBP-2 target.  The identifiers are specified
+		in SAM-2...SAM-4 annex A.  They are persistent and world-wide
+		unique properties the SBP-2 attached target.
+
+		Read-only attribute, immutable during the target's lifetime.
+		Format, as exposed by firewire-sbp2 since 2.6.22, May 2007:
+		Colon-separated hexadecimal string representations of
+			u64 EUI-64 : u24 directory_ID : u16 LUN
+		without 0x prefixes, without whitespace.  The former sbp2 driver
+		(removed in 2.6.37 after being superseded by firewire-sbp2) used
+		a somewhat shorter format which was not as close to SAM.
+
+Users:		udev rules to create /dev/disk/by-id/ symlinks
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-nvmem b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-nvmem
new file mode 100644
index 0000000..5923ab4
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-nvmem
@@ -0,0 +1,19 @@
+What:		/sys/bus/nvmem/devices/.../nvmem
+Date:		July 2015
+KernelVersion:  4.2
+Contact:	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+Description:
+		This file allows user to read/write the raw NVMEM contents.
+		Permissions for write to this file depends on the nvmem
+		provider configuration.
+
+		ex:
+		hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+
+		0000000 0000 0000 0000 0000 0000 0000 0000 0000
+		*
+		00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
+		0000000 0000 0000 0000 0000 0000 0000 0000 0000
+		...
+		*
+		0001000
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-usb b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-usb
new file mode 100644
index 0000000..b832eef
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-usb
@@ -0,0 +1,140 @@
+What:		/sys/bus/usb/devices/.../power/persist
+Date:		May 2007
+KernelVersion:	2.6.23
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		USB device directories can contain a file named power/persist.
+		The file holds a boolean value (0 or 1) indicating whether or
+		not the "USB-Persist" facility is enabled for the device.  For
+		hubs this facility is always enabled and their device
+		directories will not contain this file.
+
+		For more information, see Documentation/driver-api/usb/persist.rst.
+
+What:		/sys/bus/usb/devices/.../power/autosuspend
+Date:		March 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		Each USB device directory will contain a file named
+		power/autosuspend.  This file holds the time (in seconds)
+		the device must be idle before it will be autosuspended.
+		0 means the device will be autosuspended as soon as
+		possible.  Negative values will prevent the device from
+		being autosuspended at all, and writing a negative value
+		will resume the device if it is already suspended.
+
+		The autosuspend delay for newly-created devices is set to
+		the value of the usbcore.autosuspend module parameter.
+
+What:		/sys/bus/usb/device/.../power/connected_duration
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		If CONFIG_PM is enabled, then this file is present.  When read,
+		it returns the total time (in msec) that the USB device has been
+		connected to the machine.  This file is read-only.
+Users:
+		PowerTOP <powertop@lists.01.org>
+		https://01.org/powertop/
+
+What:		/sys/bus/usb/device/.../power/active_duration
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		If CONFIG_PM is enabled, then this file is present.  When read,
+		it returns the total time (in msec) that the USB device has been
+		active, i.e. not in a suspended state.  This file is read-only.
+
+		Tools can use this file and the connected_duration file to
+		compute the percentage of time that a device has been active.
+		For example,
+		echo $((100 * `cat active_duration` / `cat connected_duration`))
+		will give an integer percentage.  Note that this does not
+		account for counter wrap.
+Users:
+		PowerTOP <powertop@lists.01.org>
+		https://01.org/powertop/
+
+What:		/sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend
+Date:		January 2008
+KernelVersion:	2.6.27
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		When read, this file returns 1 if the interface driver
+		for this interface supports autosuspend.  It also
+		returns 1 if no driver has claimed this interface, as an
+		unclaimed interface will not stop the device from being
+		autosuspended if all other interface drivers are idle.
+		The file returns 0 if autosuspend support has not been
+		added to the driver.
+Users:
+		USB PM tool
+		git://git.moblin.org/users/sarah/usb-pm-tool/
+
+What:		/sys/bus/usb/device/.../avoid_reset_quirk
+Date:		December 2009
+Contact:	Oliver Neukum <oliver@neukum.org>
+Description:
+		Writing 1 to this file tells the kernel that this
+		device will morph into another mode when it is reset.
+		Drivers will not use reset for error handling for
+		such devices.
+Users:
+		usb_modeswitch
+
+What:		/sys/bus/usb/devices/.../devnum
+KernelVersion:	since at least 2.6.18
+Description:
+		Device address on the USB bus.
+Users:
+		libusb
+
+What:		/sys/bus/usb/devices/.../bConfigurationValue
+KernelVersion:	since at least 2.6.18
+Description:
+		bConfigurationValue of the *active* configuration for the
+		device. Writing 0 or -1 to bConfigurationValue will reset the
+		active configuration (unconfigure the device). Writing
+		another value will change the active configuration.
+
+		Note that some devices, in violation of the USB spec, have a
+		configuration with a value equal to 0. Writing 0 to
+		bConfigurationValue for these devices will install that
+		configuration, rather then unconfigure the device.
+
+		Writing -1 will always unconfigure the device.
+Users:
+		libusb
+
+What:		/sys/bus/usb/devices/.../busnum
+KernelVersion:	2.6.22
+Description:
+		Bus-number of the USB-bus the device is connected to.
+Users:
+		libusb
+
+What:		/sys/bus/usb/devices/.../descriptors
+KernelVersion:	2.6.26
+Description:
+		Binary file containing cached descriptors of the device. The
+		binary data consists of the device descriptor followed by the
+		descriptors for each configuration of the device.
+		Note that the wTotalLength of the config descriptors can not
+		be trusted, as the device may have a smaller config descriptor
+		than it advertises. The bLength field of each (sub) descriptor
+		can be trusted, and can be used to seek forward one (sub)
+		descriptor at a time until the next config descriptor is found.
+		All descriptors read from this file are in bus-endian format
+Users:
+		libusb
+
+What:		/sys/bus/usb/devices/.../speed
+KernelVersion:	since at least 2.6.18
+Description:
+		Speed the device is connected with to the usb-host in
+		Mbit / second. IE one of 1.5 / 12 / 480 / 5000.
+Users:
+		libusb
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-vmbus b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-vmbus
new file mode 100644
index 0000000..5d0125f
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-vmbus
@@ -0,0 +1,43 @@
+What:		/sys/bus/vmbus/devices/vmbus_*/id
+Date:		Jul 2009
+KernelVersion:	2.6.31
+Contact:	K. Y. Srinivasan <kys@microsoft.com>
+Description:	The VMBus child_relid of the device's primary channel
+Users:		tools/hv/lsvmbus
+
+What:		/sys/bus/vmbus/devices/vmbus_*/class_id
+Date:		Jul 2009
+KernelVersion:	2.6.31
+Contact:	K. Y. Srinivasan <kys@microsoft.com>
+Description:	The VMBus interface type GUID of the device
+Users:		tools/hv/lsvmbus
+
+What:		/sys/bus/vmbus/devices/vmbus_*/device_id
+Date:		Jul 2009
+KernelVersion:	2.6.31
+Contact:	K. Y. Srinivasan <kys@microsoft.com>
+Description:	The VMBus interface instance GUID of the device
+Users:		tools/hv/lsvmbus
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channel_vp_mapping
+Date:		Jul 2015
+KernelVersion:	4.2.0
+Contact:	K. Y. Srinivasan <kys@microsoft.com>
+Description:	The mapping of which primary/sub channels are bound to which
+		Virtual Processors.
+		Format: <channel's child_relid:the bound cpu's number>
+Users:		tools/hv/lsvmbus
+
+What:		/sys/bus/vmbus/devices/vmbus_*/device
+Date:		Dec. 2015
+KernelVersion:	4.5
+Contact:	K. Y. Srinivasan <kys@microsoft.com>
+Description:	The 16 bit device ID of the device
+Users:		tools/hv/lsvmbus and user level RDMA libraries
+
+What:		/sys/bus/vmbus/devices/vmbus_*/vendor
+Date:		Dec. 2015
+KernelVersion:	4.5
+Contact:	K. Y. Srinivasan <kys@microsoft.com>
+Description:	The 16 bit vendor ID of the device
+Users:		tools/hv/lsvmbus and user level RDMA libraries
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-w1 b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-w1
new file mode 100644
index 0000000..140d85b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-w1
@@ -0,0 +1,11 @@
+What:		/sys/bus/w1/devices/.../w1_master_timeout_us
+Date:		April 2015
+Contact:	Dmitry Khromov <dk@icelogic.net>
+Description:	Bus scanning interval, microseconds component.
+		Some of 1-Wire devices commonly associated with physical access
+		control systems are attached/generate presence for as short as
+		100 ms - hence the tens-to-hundreds milliseconds scan intervals
+		are required.
+		see Documentation/w1/w1.generic for detailed information.
+Users:		any user space application which wants to know bus scanning
+		interval
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-xen-backend b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-xen-backend
new file mode 100644
index 0000000..3d5951c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-bus-xen-backend
@@ -0,0 +1,75 @@
+What:		/sys/bus/xen-backend/devices/*/devtype
+Date:		Feb 2009
+KernelVersion:	2.6.38
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                The type of the device.  e.g., one of: 'vbd' (block),
+                'vif' (network), or 'vfb' (framebuffer).
+
+What:		/sys/bus/xen-backend/devices/*/nodename
+Date:		Feb 2009
+KernelVersion:	2.6.38
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                XenStore node (under /local/domain/NNN/) for this
+                backend device.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/physical_device
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                The major:minor number (in hexidecimal) of the
+                physical device providing the storage for this backend
+                block device.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/mode
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Whether the block device is read-only ('r') or
+                read-write ('w').
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/f_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of flush requests from the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/oo_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of requests delayed because the backend was too
+                busy processing previous requests.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/rd_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of read requests from the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/rd_sect
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of sectors read by the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/wr_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of write requests from the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/wr_sect
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of sectors written by the frontend.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-backlight b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-backlight
new file mode 100644
index 0000000..70302f3
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-backlight
@@ -0,0 +1,56 @@
+What:		/sys/class/backlight/<backlight>/bl_power
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Control BACKLIGHT power, values are FB_BLANK_* from fb.h
+		 - FB_BLANK_UNBLANK (0)   : power on.
+		 - FB_BLANK_POWERDOWN (4) : power off
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/brightness
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Control the brightness for this <backlight>. Values
+		are between 0 and max_brightness. This file will also
+		show the brightness level stored in the driver, which
+		may not be the actual brightness (see actual_brightness).
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/actual_brightness
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Show the actual brightness by querying the hardware.
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/max_brightness
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Maximum brightness for <backlight>.
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/type
+Date:		September 2010
+KernelVersion:	2.6.37
+Contact:	Matthew Garrett <mjg@redhat.com>
+Description:
+		The type of interface controlled by <backlight>.
+		"firmware": The driver uses a standard firmware interface
+		"platform": The driver uses a platform-specific interface
+		"raw": The driver controls hardware registers directly
+
+		In the general case, when multiple backlight
+		interfaces are available for a single device, firmware
+		control should be preferred to platform control should
+		be preferred to raw control. Using a firmware
+		interface reduces the probability of confusion with
+		the hardware and the OS independently updating the
+		backlight state. Platform interfaces are mostly a
+		holdover from pre-standardisation of firmware
+		interfaces.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-rfkill b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-rfkill
new file mode 100644
index 0000000..e1ba4a1
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-rfkill
@@ -0,0 +1,88 @@
+rfkill - radio frequency (RF) connector kill switch support
+
+For details to this subsystem look at Documentation/rfkill.txt.
+
+For the deprecated /sys/class/rfkill/*/claim knobs of this interface look in
+Documentation/ABI/removed/sysfs-class-rfkill.
+
+What: 		/sys/class/rfkill
+Date:		09-Jul-2007
+KernelVersion:	v2.6.22
+Contact:	linux-wireless@vger.kernel.org,
+Description: 	The rfkill class subsystem folder.
+		Each registered rfkill driver is represented by an rfkillX
+		subfolder (X being an integer > 0).
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/name
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Name assigned by driver to this key (interface or driver name).
+Values: 	arbitrary string.
+
+
+What: 		/sys/class/rfkill/rfkill[0-9]+/type
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Driver type string ("wlan", "bluetooth", etc).
+Values: 	See include/linux/rfkill.h.
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/persistent
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Whether the soft blocked state is initialised from non-volatile
+		storage at startup.
+Values: 	A numeric value.
+		0: false
+		1: true
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/state
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Current state of the transmitter.
+		This file was scheduled to be removed in 2014, but due to its
+		large number of users it will be sticking around for a bit
+		longer. Despite it being marked as stabe, the newer "hard" and
+		"soft" interfaces should be preffered, since it is not possible
+		to express the 'soft and hard block' state of the rfkill driver
+		through this interface. There will likely be another attempt to
+		remove it in the future.
+Values: 	A numeric value.
+		0: RFKILL_STATE_SOFT_BLOCKED
+			transmitter is turned off by software
+		1: RFKILL_STATE_UNBLOCKED
+			transmitter is (potentially) active
+		2: RFKILL_STATE_HARD_BLOCKED
+			transmitter is forced off by something outside of
+			the driver's control.
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/hard
+Date:		12-March-2010
+KernelVersion	v2.6.34
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Current hardblock state. This file is read only.
+Values: 	A numeric value.
+		0: inactive
+			The transmitter is (potentially) active.
+		1: active
+			The transmitter is forced off by something outside of
+			the driver's control.
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/soft
+Date:		12-March-2010
+KernelVersion	v2.6.34
+Contact:	linux-wireless@vger.kernel.org
+Description:	Current softblock state. This file is read and write.
+Values: 	A numeric value.
+		0: inactive
+			The transmitter is (potentially) active.
+		1: active
+			The transmitter is turned off by software.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-tpm b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-tpm
new file mode 100644
index 0000000..c0e2383
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-tpm
@@ -0,0 +1,185 @@
+What:		/sys/class/tpm/tpmX/device/
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The device/ directory under a specific TPM instance exposes
+		the properties of that TPM chip
+
+
+What:		/sys/class/tpm/tpmX/device/active
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "active" property prints a '1' if the TPM chip is accepting
+		commands. An inactive TPM chip still contains all the state of
+		an active chip (Storage Root Key, NVRAM, etc), and can be
+		visible to the OS, but will only accept a restricted set of
+		commands. See the TPM Main Specification part 2, Structures,
+		section 17 for more information on which commands are
+		available.
+
+What:		/sys/class/tpm/tpmX/device/cancel
+Date:		June 2005
+KernelVersion:	2.6.13
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "cancel" property allows you to cancel the currently
+		pending TPM command. Writing any value to cancel will call the
+		TPM vendor specific cancel operation.
+
+What:		/sys/class/tpm/tpmX/device/caps
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "caps" property contains TPM manufacturer and version info.
+
+		Example output:
+
+		Manufacturer: 0x53544d20
+		TCG version: 1.2
+		Firmware version: 8.16
+
+		Manufacturer is a hex dump of the 4 byte manufacturer info
+		space in a TPM. TCG version shows the TCG TPM spec level that
+		the chip supports. Firmware version is that of the chip and
+		is manufacturer specific.
+
+What:		/sys/class/tpm/tpmX/device/durations
+Date:		March 2011
+KernelVersion:	3.1
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "durations" property shows the 3 vendor-specific values
+		used to wait for a short, medium and long TPM command. All
+		TPM commands are categorized as short, medium or long in
+		execution time, so that the driver doesn't have to wait
+		any longer than necessary before starting to poll for a
+		result.
+
+		Example output:
+
+		3015000 4508000 180995000 [original]
+
+		Here the short, medium and long durations are displayed in
+		usecs. "[original]" indicates that the values are displayed
+		unmodified from when they were queried from the chip.
+		Durations can be modified in the case where a buggy chip
+		reports them in msec instead of usec and they need to be
+		scaled to be displayed in usecs. In this case "[adjusted]"
+		will be displayed in place of "[original]".
+
+What:		/sys/class/tpm/tpmX/device/enabled
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "enabled" property prints a '1' if the TPM chip is enabled,
+		meaning that it should be visible to the OS. This property
+		may be visible but produce a '0' after some operation that
+		disables the TPM.
+
+What:		/sys/class/tpm/tpmX/device/owned
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "owned" property produces a '1' if the TPM_TakeOwnership
+		ordinal has been executed successfully in the chip. A '0'
+		indicates that ownership hasn't been taken.
+
+What:		/sys/class/tpm/tpmX/device/pcrs
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "pcrs" property will dump the current value of all Platform
+		Configuration Registers in the TPM. Note that since these
+		values may be constantly changing, the output is only valid
+		for a snapshot in time.
+
+		Example output:
+
+		PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		...
+
+		The number of PCRs and hex bytes needed to represent a PCR
+		value will vary depending on TPM chip version. For TPM 1.1 and
+		1.2 chips, PCRs represent SHA-1 hashes, which are 20 bytes
+		long. Use the "caps" property to determine TPM version.
+
+What:		/sys/class/tpm/tpmX/device/pubek
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "pubek" property will return the TPM's public endorsement
+		key if possible. If the TPM has had ownership established and
+		is version 1.2, the pubek will not be available without the
+		owner's authorization. Since the TPM driver doesn't store any
+		secrets, it can't authorize its own request for the pubek,
+		making it unaccessible. The public endorsement key is gener-
+		ated at TPM manufacture time and exists for the life of the
+		chip.
+
+		Example output:
+
+		Algorithm: 00 00 00 01
+		Encscheme: 00 03
+		Sigscheme: 00 01
+		Parameters: 00 00 08 00 00 00 00 02 00 00 00 00
+		Modulus length: 256
+		Modulus:
+		B4 76 41 82 C9 20 2C 10 18 40 BC 8B E5 44 4C 6C
+		3A B2 92 0C A4 9B 2A 83 EB 5C 12 85 04 48 A0 B6
+		1E E4 81 84 CE B2 F2 45 1C F0 85 99 61 02 4D EB
+		86 C4 F7 F3 29 60 52 93 6B B2 E5 AB 8B A9 09 E3
+		D7 0E 7D CA 41 BF 43 07 65 86 3C 8C 13 7A D0 8B
+		82 5E 96 0B F8 1F 5F 34 06 DA A2 52 C1 A9 D5 26
+		0F F4 04 4B D9 3F 2D F2 AC 2F 74 64 1F 8B CD 3E
+		1E 30 38 6C 70 63 69 AB E2 50 DF 49 05 2E E1 8D
+		6F 78 44 DA 57 43 69 EE 76 6C 38 8A E9 8E A3 F0
+		A7 1F 3C A8 D0 12 15 3E CA 0E BD FA 24 CD 33 C6
+		47 AE A4 18 83 8E 22 39 75 93 86 E6 FD 66 48 B6
+		10 AD 94 14 65 F9 6A 17 78 BD 16 53 84 30 BF 70
+		E0 DC 65 FD 3C C6 B0 1E BF B9 C1 B5 6C EF B1 3A
+		F8 28 05 83 62 26 11 DC B4 6B 5A 97 FF 32 26 B6
+		F7 02 71 CF 15 AE 16 DD D1 C1 8E A8 CF 9B 50 7B
+		C3 91 FF 44 1E CF 7C 39 FE 17 77 21 20 BD CE 9B
+
+		Possible values:
+
+		Algorithm:	TPM_ALG_RSA			(1)
+		Encscheme:	TPM_ES_RSAESPKCSv15		(2)
+				TPM_ES_RSAESOAEP_SHA1_MGF1	(3)
+		Sigscheme:	TPM_SS_NONE			(1)
+		Parameters, a byte string of 3 u32 values:
+			Key Length (bits):	00 00 08 00	(2048)
+			Num primes:		00 00 00 02	(2)
+			Exponent Size:		00 00 00 00	(0 means the
+								 default exp)
+		Modulus Length: 256 (bytes)
+		Modulus:	The 256 byte Endorsement Key modulus
+
+What:		/sys/class/tpm/tpmX/device/temp_deactivated
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "temp_deactivated" property returns a '1' if the chip has
+		been temporarily deactivated, usually until the next power
+		cycle. Whether a warm boot (reboot) will clear a TPM chip
+		from a temp_deactivated state is platform specific.
+
+What:		/sys/class/tpm/tpmX/device/timeouts
+Date:		March 2011
+KernelVersion:	3.1
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "timeouts" property shows the 4 vendor-specific values
+		for the TPM's interface spec timeouts. The use of these
+		timeouts is defined by the TPM interface spec that the chip
+		conforms to.
+
+		Example output:
+
+		750000 750000 750000 750000 [original]
+
+		The four timeout values are shown in usecs, with a trailing
+		"[original]" or "[adjusted]" depending on whether the values
+		were scaled by the driver to be reported in usec from msecs.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-ubi b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-ubi
new file mode 100644
index 0000000..a6b3240
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-ubi
@@ -0,0 +1,221 @@
+What:		/sys/class/ubi/
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		The ubi/ class sub-directory belongs to the UBI subsystem and
+		provides general UBI information, per-UBI device information
+		and per-UBI volume information.
+
+What:		/sys/class/ubi/version
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		This file contains version of the latest supported UBI on-media
+		format. Currently it is 1, and there is no plan to change this.
+		However, if in the future UBI needs on-flash format changes
+		which cannot be done in a compatible manner, a new format
+		version will be added. So this is a mechanism for possible
+		future backward-compatible (but forward-incompatible)
+		improvements.
+
+What:		/sys/class/ubiX/
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		The /sys/class/ubi0, /sys/class/ubi1, etc directories describe
+		UBI devices (UBI device 0, 1, etc). They contain general UBI
+		device information and per UBI volume information (each UBI
+		device may have many UBI volumes)
+
+What:		/sys/class/ubi/ubiX/avail_eraseblocks
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Amount of available logical eraseblock. For example, one may
+		create a new UBI volume which has this amount of logical
+		eraseblocks.
+
+What:		/sys/class/ubi/ubiX/bad_peb_count
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Count of bad physical eraseblocks on the underlying MTD device.
+
+What:		/sys/class/ubi/ubiX/bgt_enabled
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Contains ASCII "0\n" if the UBI background thread is disabled,
+		and ASCII "1\n" if it is enabled.
+
+What:		/sys/class/ubi/ubiX/dev
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Major and minor numbers of the character device corresponding
+		to this UBI device (in <major>:<minor> format).
+
+What:		/sys/class/ubi/ubiX/eraseblock_size
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Maximum logical eraseblock size this UBI device may provide. UBI
+		volumes may have smaller logical eraseblock size because of their
+		alignment.
+
+What:		/sys/class/ubi/ubiX/max_ec
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Maximum physical eraseblock erase counter value.
+
+What:		/sys/class/ubi/ubiX/max_vol_count
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Maximum number of volumes which this UBI device may have.
+
+What:		/sys/class/ubi/ubiX/min_io_size
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Minimum input/output unit size. All the I/O may only be done
+		in fractions of the contained number.
+
+What:		/sys/class/ubi/ubiX/mtd_num
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Number of the underlying MTD device.
+
+What:		/sys/class/ubi/ubiX/reserved_for_bad
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Number of physical eraseblocks reserved for bad block handling.
+
+What:		/sys/class/ubi/ubiX/ro_mode
+Date:		April 2016
+KernelVersion:	4.7
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Contains ASCII "1\n" if the read-only flag is set on this
+		device, and "0\n" if it is cleared. UBI devices mark themselves
+		as read-only when they detect an unrecoverable error.
+
+What:		/sys/class/ubi/ubiX/total_eraseblocks
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Total number of good (not marked as bad) physical eraseblocks on
+		the underlying MTD device.
+
+What:		/sys/class/ubi/ubiX/volumes_count
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Count of volumes on this UBI device.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		The /sys/class/ubi/ubiX/ubiX_0/, /sys/class/ubi/ubiX/ubiX_1/,
+		etc directories describe UBI volumes on UBI device X (volumes
+		0, 1, etc).
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/alignment
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Volume alignment - the value the logical eraseblock size of
+		this volume has to be aligned on. For example, 2048 means that
+		logical eraseblock size is multiple of 2048. In other words,
+		volume logical eraseblock size is UBI device logical eraseblock
+		size aligned to the alignment value.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/corrupted
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Contains ASCII "0\n" if the UBI volume is OK, and ASCII "1\n"
+		if it is corrupted (e.g., due to an interrupted volume update).
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/data_bytes
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		The amount of data this volume contains. This value makes sense
+		only for static volumes, and for dynamic volume it equivalent
+		to the total volume size in bytes.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/dev
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Major and minor numbers of the character device corresponding
+		to this UBI volume (in <major>:<minor> format).
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/name
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Volume name.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/reserved_ebs
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Count of physical eraseblock reserved for this volume.
+		Equivalent to the volume size in logical eraseblocks.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/type
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Volume type. Contains ASCII "dynamic\n" for dynamic volumes and
+		"static\n" for static volumes.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/upd_marker
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Contains ASCII "0\n" if the update marker is not set for this
+		volume, and "1\n" if it is set. The update marker is set when
+		volume update starts, and cleaned when it ends. So the presence
+		of the update marker indicates that the volume is being updated
+		at the moment of the update was interrupted. The later may be
+		checked using the "corrupted" sysfs file.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/usable_eb_size
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Logical eraseblock size of this volume. Equivalent to logical
+		eraseblock size of the device aligned on the volume alignment
+		value.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-udc b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-udc
new file mode 100644
index 0000000..d1e2f3e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-class-udc
@@ -0,0 +1,93 @@
+What:		/sys/class/udc/<udc>/a_alt_hnp_support
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Indicates if an OTG A-Host supports HNP at an alternate port.
+Users:
+
+What:		/sys/class/udc/<udc>/a_hnp_support
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Indicates if an OTG A-Host supports HNP at this port.
+Users:
+
+What:		/sys/class/udc/<udc>/b_hnp_enable
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Indicates if an OTG A-Host enabled HNP support.
+Users:
+
+What:		/sys/class/udc/<udc>/current_speed
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Indicates the current negotiated speed at this port.
+Users:
+
+What:		/sys/class/udc/<udc>/is_a_peripheral
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Indicates that this port is the default Host on an OTG session
+		but HNP was used to switch roles.
+Users:
+
+What:		/sys/class/udc/<udc>/is_otg
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Indicates that this port support OTG.
+Users:
+
+What:		/sys/class/udc/<udc>/maximum_speed
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Indicates the maximum USB speed supported by this port.
+Users:
+
+What:		/sys/class/udc/<udc>/soft_connect
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Allows users to disconnect data pullup resistors thus causing a
+		logical disconnection from the USB Host.
+Users:
+
+What:		/sys/class/udc/<udc>/srp
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Allows users to manually start Session Request Protocol.
+Users:
+
+What:		/sys/class/udc/<udc>/state
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Indicates current state of the USB Device Controller. Valid
+		states are: 'not-attached', 'attached', 'powered',
+		'reconnecting', 'unauthenticated', 'default', 'addressed',
+		'configured', and 'suspended'; however not all USB Device
+		Controllers support reporting all states.
+Users:
+
+What:		/sys/class/udc/<udc>/function
+Date:		June 2017
+KernelVersion:	4.13
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Prints out name of currently running USB Gadget Driver.
+Users:
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices
new file mode 100644
index 0000000..35c457f
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices
@@ -0,0 +1,24 @@
+# Note: This documents additional properties of any device beyond what
+# is documented in Documentation/sysfs-rules.txt
+
+What:		/sys/devices/*/of_node
+Date:		February 2015
+Contact:	Device Tree mailing list <devicetree@vger.kernel.org>
+Description:
+		Any device associated with a device-tree node will have
+		an of_path symlink pointing to the corresponding device
+		node in /sys/firmware/devicetree/
+
+What:		/sys/devices/*/devspec
+Date:		October 2016
+Contact:	Device Tree mailing list <devicetree@vger.kernel.org>
+Description:
+		If CONFIG_OF is enabled, then this file is present. When
+		read, it returns full name of the device node.
+
+What:		/sys/devices/*/obppath
+Date:		October 2016
+Contact:	Device Tree mailing list <devicetree@vger.kernel.org>
+Description:
+		If CONFIG_OF is enabled, then this file is present. When
+		read, it returns full name of the device node.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-node b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-node
new file mode 100644
index 0000000..5b2d0f0
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-node
@@ -0,0 +1,93 @@
+What:		/sys/devices/system/node/possible
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that could be possibly become online at some point.
+
+What:		/sys/devices/system/node/online
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that are online.
+
+What:		/sys/devices/system/node/has_normal_memory
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that have regular memory.
+
+What:		/sys/devices/system/node/has_cpu
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that have one or more CPUs.
+
+What:		/sys/devices/system/node/has_high_memory
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that have regular or high memory.
+		Depends on CONFIG_HIGHMEM.
+
+What:		/sys/devices/system/node/nodeX
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		When CONFIG_NUMA is enabled, this is a directory containing
+		information on node X such as what CPUs are local to the
+		node. Each file is detailed next.
+
+What:		/sys/devices/system/node/nodeX/cpumap
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The node's cpumap.
+
+What:		/sys/devices/system/node/nodeX/cpulist
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The CPUs associated to the node.
+
+What:		/sys/devices/system/node/nodeX/meminfo
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Provides information about the node's distribution and memory
+		utilization. Similar to /proc/meminfo, see Documentation/filesystems/proc.txt
+
+What:		/sys/devices/system/node/nodeX/numastat
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The node's hit/miss statistics, in units of pages.
+		See Documentation/numastat.txt
+
+What:		/sys/devices/system/node/nodeX/distance
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Distance between the node and all the other nodes
+		in the system.
+
+What:		/sys/devices/system/node/nodeX/vmstat
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The node's zoned virtual memory statistics.
+		This is a superset of numastat.
+
+What:		/sys/devices/system/node/nodeX/compact
+Date:		February 2010
+Contact:	Mel Gorman <mel@csn.ul.ie>
+Description:
+		When this file is written to, all memory within that node
+		will be compacted. When it completes, memory will be freed
+		into blocks which have as many contiguous pages as possible
+
+What:		/sys/devices/system/node/nodeX/hugepages/hugepages-<size>/
+Date:		December 2009
+Contact:	Lee Schermerhorn <lee.schermerhorn@hp.com>
+Description:
+		The node's huge page size control/query attributes.
+		See Documentation/vm/hugetlbpage.txt
\ No newline at end of file
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-system-cpu b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-system-cpu
new file mode 100644
index 0000000..33c133e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-system-cpu
@@ -0,0 +1,25 @@
+What: 		/sys/devices/system/cpu/dscr_default
+Date:		13-May-2014
+KernelVersion:	v3.15.0
+Contact:
+Description:	Writes are equivalent to writing to
+		/sys/devices/system/cpu/cpuN/dscr on all CPUs.
+		Reads return the last written value or 0.
+		This value is not a global default: it is a way to set
+		all per-CPU defaults at the same time.
+Values:		64 bit unsigned integer (bit field)
+
+What: 		/sys/devices/system/cpu/cpu[0-9]+/dscr
+Date:		13-May-2014
+KernelVersion:	v3.15.0
+Contact:
+Description:	Default value for the Data Stream Control Register (DSCR) on
+		a CPU.
+		This default value is used when the kernel is executing and
+		for any process that has not set the DSCR itself.
+		If a process ever sets the DSCR (via direct access to the
+		SPR) that value will be persisted for that process and used
+		on any CPU where it executes (overriding the value described
+		here).
+		If set by a process it will be inherited by child processes.
+Values:		64 bit unsigned integer (bit field)
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-system-xen_memory b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-system-xen_memory
new file mode 100644
index 0000000..caa311d
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-devices-system-xen_memory
@@ -0,0 +1,77 @@
+What:		/sys/devices/system/xen_memory/xen_memory0/max_retry_count
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The maximum number of times the balloon driver will
+		attempt to increase the balloon before giving up.  See
+		also 'retry_count' below.
+		A value of zero means retry forever and is the default one.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/max_schedule_delay
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The limit that 'schedule_delay' (see below) will be
+		increased to. The default value is 32 seconds.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/retry_count
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The current number of times that the balloon driver
+		has attempted to increase the size of the balloon.
+		The default value is one. With max_retry_count being
+		zero (unlimited), this means that the driver will attempt
+		to retry with a 'schedule_delay' delay.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/schedule_delay
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The time (in seconds) to wait between attempts to
+		increase the balloon.  Each time the balloon cannot be
+		increased, 'schedule_delay' is increased (until
+		'max_schedule_delay' is reached at which point it
+		will use the max value).
+
+What:		/sys/devices/system/xen_memory/xen_memory0/target
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The target number of pages to adjust this domain's
+		memory reservation to.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/target_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		As target above, except the value is in KiB.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/info/current_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		Current size (in KiB) of this domain's memory
+		reservation.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/info/high_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		Amount (in KiB) of high memory in the balloon.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/info/low_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		Amount (in KiB) of low (or normal) memory in the
+		balloon.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-aspeed-vuart b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
new file mode 100644
index 0000000..8062953
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
@@ -0,0 +1,15 @@
+What:		/sys/bus/platform/drivers/aspeed-vuart/*/lpc_address
+Date:		April 2017
+Contact:	Jeremy Kerr <jk@ozlabs.org>
+Description:	Configures which IO port the host side of the UART
+		will appear on the host <-> BMC LPC bus.
+Users:		OpenBMC.  Proposed changes should be mailed to
+		openbmc@lists.ozlabs.org
+
+What:		/sys/bus/platform/drivers/aspeed-vuart*/sirq
+Date:		April 2017
+Contact:	Jeremy Kerr <jk@ozlabs.org>
+Description:	Configures which interrupt number the host side of
+		the UART will appear on the host <-> BMC LPC bus.
+Users:		OpenBMC.  Proposed changes should be mailed to
+		openbmc@lists.ozlabs.org
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-dma-ioatdma b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-dma-ioatdma
new file mode 100644
index 0000000..420c1d0
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-dma-ioatdma
@@ -0,0 +1,30 @@
+What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/cap
+Date:           December 3, 2009
+KernelVersion:  2.6.32
+Contact:        dmaengine@vger.kernel.org
+Description:	Capabilities the DMA supports.Currently there are DMA_PQ, DMA_PQ_VAL,
+		DMA_XOR,DMA_XOR_VAL,DMA_INTERRUPT.
+
+What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_active
+Date:           December 3, 2009
+KernelVersion:  2.6.32
+Contact:        dmaengine@vger.kernel.org
+Description:	The number of descriptors active in the ring.
+
+What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_size
+Date:           December 3, 2009
+KernelVersion:  2.6.32
+Contact:        dmaengine@vger.kernel.org
+Description:	Descriptor ring size, total number of descriptors available.
+
+What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/version
+Date:           December 3, 2009
+KernelVersion:  2.6.32
+Contact:        dmaengine@vger.kernel.org
+Description:	Version of ioatdma device.
+
+What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/intr_coalesce
+Date:           August 8, 2017
+KernelVersion:  4.14
+Contact:        dmaengine@vger.kernel.org
+Description:	Tune-able interrupt delay value per channel basis.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-ib_srp b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-ib_srp
new file mode 100644
index 0000000..7049a2b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-ib_srp
@@ -0,0 +1,189 @@
+What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/add_target
+Date:		January 2, 2006
+KernelVersion:	2.6.15
+Contact:	linux-rdma@vger.kernel.org
+Description:	Interface for making ib_srp connect to a new target.
+		One can request ib_srp to connect to a new target by writing
+		a comma-separated list of login parameters to this sysfs
+		attribute. The supported parameters are:
+		* id_ext, a 16-digit hexadecimal number specifying the eight
+		  byte identifier extension in the 16-byte SRP target port
+		  identifier. The target port identifier is sent by ib_srp
+		  to the target in the SRP_LOGIN_REQ request.
+		* ioc_guid, a 16-digit hexadecimal number specifying the eight
+		  byte I/O controller GUID portion of the 16-byte target port
+		  identifier.
+		* dgid, a 32-digit hexadecimal number specifying the
+		  destination GID.
+		* pkey, a four-digit hexadecimal number specifying the
+		  InfiniBand partition key.
+		* service_id, a 16-digit hexadecimal number specifying the
+		  InfiniBand service ID used to establish communication with
+		  the SRP target. How to find out the value of the service ID
+		  is specified in the documentation of the SRP target.
+		* max_sect, a decimal number specifying the maximum number of
+		  512-byte sectors to be transferred via a single SCSI command.
+		* max_cmd_per_lun, a decimal number specifying the maximum
+		  number of outstanding commands for a single LUN.
+		* io_class, a hexadecimal number specifying the SRP I/O class.
+		  Must be either 0xff00 (rev 10) or 0x0100 (rev 16a). The I/O
+		  class defines the format of the SRP initiator and target
+		  port identifiers.
+		* initiator_ext, a 16-digit hexadecimal number specifying the
+		  identifier extension portion of the SRP initiator port
+		  identifier. This data is sent by the initiator to the target
+		  in the SRP_LOGIN_REQ request.
+		* cmd_sg_entries, a number in the range 1..255 that specifies
+		  the maximum number of data buffer descriptors stored in the
+		  SRP_CMD information unit itself. With allow_ext_sg=0 the
+		  parameter cmd_sg_entries defines the maximum S/G list length
+		  for a single SRP_CMD, and commands whose S/G list length
+		  exceeds this limit after S/G list collapsing will fail.
+		* allow_ext_sg, whether ib_srp is allowed to include a partial
+		  memory descriptor list in an SRP_CMD instead of the entire
+		  list. If a partial memory descriptor list has been included
+		  in an SRP_CMD the remaining memory descriptors are
+		  communicated from initiator to target via an additional RDMA
+		  transfer. Setting allow_ext_sg to 1 increases the maximum
+		  amount of data that can be transferred between initiator and
+		  target via a single SCSI command. Since not all SRP target
+		  implementations support partial memory descriptor lists the
+		  default value for this option is 0.
+		* sg_tablesize, a number in the range 1..2048 specifying the
+		  maximum S/G list length the SCSI layer is allowed to pass to
+		  ib_srp. Specifying a value that exceeds cmd_sg_entries is
+		  only safe with partial memory descriptor list support enabled
+		  (allow_ext_sg=1).
+		* comp_vector, a number in the range 0..n-1 specifying the
+		  MSI-X completion vector of the first RDMA channel. Some
+		  HCA's allocate multiple (n) MSI-X vectors per HCA port. If
+		  the IRQ affinity masks of these interrupts have been
+		  configured such that each MSI-X interrupt is handled by a
+		  different CPU then the comp_vector parameter can be used to
+		  spread the SRP completion workload over multiple CPU's.
+		* tl_retry_count, a number in the range 2..7 specifying the
+		  IB RC retry count.
+		* queue_size, the maximum number of commands that the
+		  initiator is allowed to queue per SCSI host. The default
+		  value for this parameter is 62. The lowest supported value
+		  is 2.
+
+What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/ibdev
+Date:		January 2, 2006
+KernelVersion:	2.6.15
+Contact:	linux-rdma@vger.kernel.org
+Description:	HCA name (<hca>).
+
+What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/port
+Date:		January 2, 2006
+KernelVersion:	2.6.15
+Contact:	linux-rdma@vger.kernel.org
+Description:	HCA port number (<port_number>).
+
+What:		/sys/class/scsi_host/host<n>/allow_ext_sg
+Date:		May 19, 2011
+KernelVersion:	2.6.39
+Contact:	linux-rdma@vger.kernel.org
+Description:	Whether ib_srp is allowed to include a partial memory
+		descriptor list in an SRP_CMD when communicating with an SRP
+		target.
+
+What:		/sys/class/scsi_host/host<n>/ch_count
+Date:		April 1, 2015
+KernelVersion:	3.19
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of RDMA channels used for communication with the SRP
+		target.
+
+What:		/sys/class/scsi_host/host<n>/cmd_sg_entries
+Date:		May 19, 2011
+KernelVersion:	2.6.39
+Contact:	linux-rdma@vger.kernel.org
+Description:	Maximum number of data buffer descriptors that may be sent to
+		the target in a single SRP_CMD request.
+
+What:		/sys/class/scsi_host/host<n>/comp_vector
+Date:		September 2, 2013
+KernelVersion:	3.11
+Contact:	linux-rdma@vger.kernel.org
+Description:	Completion vector used for the first RDMA channel.
+
+What:		/sys/class/scsi_host/host<n>/dgid
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand destination GID used for communication with the SRP
+		target. Differs from orig_dgid if port redirection has happened.
+
+What:		/sys/class/scsi_host/host<n>/id_ext
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	Eight-byte identifier extension portion of the 16-byte target
+		port identifier.
+
+What:		/sys/class/scsi_host/host<n>/ioc_guid
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	Eight-byte I/O controller GUID portion of the 16-byte target
+		port identifier.
+
+What:		/sys/class/scsi_host/host<n>/local_ib_device
+Date:		November 29, 2006
+KernelVersion:	2.6.19
+Contact:	linux-rdma@vger.kernel.org
+Description:	Name of the InfiniBand HCA used for communicating with the
+		SRP target.
+
+What:		/sys/class/scsi_host/host<n>/local_ib_port
+Date:		November 29, 2006
+KernelVersion:	2.6.19
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of the HCA port used for communicating with the
+		SRP target.
+
+What:		/sys/class/scsi_host/host<n>/orig_dgid
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand destination GID specified in the parameters
+		written to the add_target sysfs attribute.
+
+What:		/sys/class/scsi_host/host<n>/pkey
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	A 16-bit number representing the InfiniBand partition key used
+		for communication with the SRP target.
+
+What:		/sys/class/scsi_host/host<n>/req_lim
+Date:		October 20, 2010
+KernelVersion:	2.6.36
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of requests ib_srp can send to the target before it has
+		to wait for more credits. For more information see also the
+		SRP credit algorithm in the SRP specification.
+
+What:		/sys/class/scsi_host/host<n>/service_id
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand service ID used for establishing communication with
+		the SRP	target.
+
+What:		/sys/class/scsi_host/host<n>/sgid
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand GID of the source port used for communication with
+		the SRP target.
+
+What:		/sys/class/scsi_host/host<n>/zero_req_lim
+Date:		September 20, 2006
+KernelVersion:	2.6.18
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of times the initiator had to wait before sending a
+		request to the target because it ran out of credits. For more
+		information see also the SRP credit algorithm in the SRP
+		specification.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-qla2xxx b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-qla2xxx
new file mode 100644
index 0000000..9a59d84
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-qla2xxx
@@ -0,0 +1,8 @@
+What:		/sys/bus/pci/drivers/qla2xxx/.../devices/*
+Date:		September 2009
+Contact:	QLogic Linux Driver <linux-driver@qlogic.com>
+Description:	qla2xxx-udev.sh currently looks for uevent CHANGE events to
+		signal a firmware-dump has been generated by the driver and is
+		ready for retrieval.
+Users:		qla2xxx-udev.sh.  Proposed changes should be mailed to
+		linux-driver@qlogic.com
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-usb-usbtmc b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
new file mode 100644
index 0000000..e960cd0
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
@@ -0,0 +1,62 @@
+What:		/sys/bus/usb/drivers/usbtmc/*/interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/device_capabilities
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		These files show the various USB TMC capabilities as described
+		by the device itself.  The full description of the bitfields
+		can be found in the USB TMC documents from the USB-IF entitled
+		"Universal Serial Bus Test and Measurement Class Specification
+		(USBTMC) Revision 1.0" section 4.2.1.8.
+
+		The files are read only.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		These files show the various USB TMC capabilities as described
+		by the device itself.  The full description of the bitfields
+		can be found in the USB TMC documents from the USB-IF entitled
+		"Universal Serial Bus Test and Measurement Class, Subclass
+		USB488 Specification (USBTMC-USB488) Revision 1.0" section
+		4.2.2.
+
+		The files are read only.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/*/TermChar
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		This file is the TermChar value to be sent to the USB TMC
+		device as described by the document, "Universal Serial Bus Test
+		and Measurement Class Specification
+		(USBTMC) Revision 1.0" as published by the USB-IF.
+
+		Note that the TermCharEnabled file determines if this value is
+		sent to the device or not.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/*/TermCharEnabled
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		This file determines if the TermChar is to be sent to the
+		device on every transaction or not.  For more details about
+		this, please see the document, "Universal Serial Bus Test and
+		Measurement Class Specification (USBTMC) Revision 1.0" as
+		published by the USB-IF.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/*/auto_abort
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		This file determines if the transaction of the USB TMC
+		device is to be automatically aborted if there is any error.
+		For more details about this, please see the document,
+		"Universal Serial Bus Test and Measurement Class Specification
+		(USBTMC) Revision 1.0" as published by the USB-IF.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-w1_ds28e04 b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-w1_ds28e04
new file mode 100644
index 0000000..26579ee
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-w1_ds28e04
@@ -0,0 +1,15 @@
+What:		/sys/bus/w1/devices/.../pio
+Date:		May 2012
+Contact:	Markus Franke <franm@hrz.tu-chemnitz.de>
+Description:	read/write the contents of the two PIO's of the DS28E04-100
+		see Documentation/w1/slaves/w1_ds28e04 for detailed information
+Users:		any user space application which wants to communicate with DS28E04-100
+
+
+
+What:		/sys/bus/w1/devices/.../eeprom
+Date:		May 2012
+Contact:	Markus Franke <franm@hrz.tu-chemnitz.de>
+Description:	read/write the contents of the EEPROM memory of the DS28E04-100
+		see Documentation/w1/slaves/w1_ds28e04 for detailed information
+Users:		any user space application which wants to communicate with DS28E04-100
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-w1_ds28ea00 b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-w1_ds28ea00
new file mode 100644
index 0000000..e928def
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-driver-w1_ds28ea00
@@ -0,0 +1,6 @@
+What:		/sys/bus/w1/devices/.../w1_seq
+Date:		Apr 2015
+Contact:	Matt Campbell <mattrcampbell@gmail.com>
+Description:	Support for the DS28EA00 chain sequence function
+		see Documentation/w1/slaves/w1_therm for detailed information
+Users:		any user space application which wants to communicate with DS28EA00
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-efi-vars b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-efi-vars
new file mode 100644
index 0000000..5def20b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-efi-vars
@@ -0,0 +1,75 @@
+What:		/sys/firmware/efi/vars
+Date:		April 2004
+Contact:	Matt Domsch <Matt_Domsch@dell.com>
+Description:
+		This directory exposes interfaces for interactive with
+		EFI variables.  For more information on EFI variables,
+		see 'Variable Services' in the UEFI specification
+		(section 7.2 in specification version 2.3 Errata D).
+
+		In summary, EFI variables are named, and are classified
+		into separate namespaces through the use of a vendor
+		GUID.  They also have an arbitrary binary value
+		associated with them.
+
+		The efivars module enumerates these variables and
+		creates a separate directory for each one found.  Each
+		directory has a name of the form "<key>-<vendor guid>"
+		and contains the following files:
+
+		attributes:	A read-only text file enumerating the
+				EFI variable flags.  Potential values
+				include:
+
+				EFI_VARIABLE_NON_VOLATILE
+				EFI_VARIABLE_BOOTSERVICE_ACCESS
+				EFI_VARIABLE_RUNTIME_ACCESS
+				EFI_VARIABLE_HARDWARE_ERROR_RECORD
+				EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS
+
+				See the EFI documentation for an
+				explanation of each of these variables.
+
+		data:		A read-only binary file that can be read
+				to attain the value of the EFI variable
+
+		guid:		The vendor GUID of the variable.  This
+				should always match the GUID in the
+				variable's name.
+
+		raw_var:	A binary file that can be read to obtain
+				a structure that contains everything
+				there is to know about the variable.
+				For structure definition see "struct
+				efi_variable" in the kernel sources.
+
+				This file can also be written to in
+				order to update the value of a variable.
+				For this to work however, all fields of
+				the "struct efi_variable" passed must
+				match byte for byte with the structure
+				read out of the file, save for the value
+				portion.
+
+				**Note** the efi_variable structure
+				read/written with this file contains a
+				'long' type that may change widths
+				depending on your underlying
+				architecture.
+
+		size:		As ASCII representation of the size of
+				the variable's value.
+
+
+		In addition, two other magic binary files are provided
+		in the top-level directory and are used for adding and
+		removing variables:
+
+		new_var:	Takes a "struct efi_variable" and
+				instructs the EFI firmware to create a
+				new variable.
+
+		del_var:	Takes a "struct efi_variable" and
+				instructs the EFI firmware to remove any
+				variable that has a matching vendor GUID
+				and variable key name.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-opal-dump b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-opal-dump
new file mode 100644
index 0000000..32fe7f5
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-opal-dump
@@ -0,0 +1,41 @@
+What:		/sys/firmware/opal/dump
+Date:		Feb 2014
+Contact:	Stewart Smith <stewart@linux.vnet.ibm.com>
+Description:
+		This directory exposes interfaces for interacting with
+		the FSP and platform dumps through OPAL firmware interface.
+
+		This is only for the powerpc/powernv platform.
+
+		initiate_dump:	When '1' is written to it,
+				we will initiate a dump.
+				Read this file for supported commands.
+
+		0xXX-0xYYYY:	A directory for dump of type 0xXX and
+				id 0xYYYY (in hex). The name of this
+				directory should not be relied upon to
+				be in this format, only that it's unique
+				among all dumps. For determining the type
+				and ID of the dump, use the id and type files.
+				Do not rely on any particular size of dump
+				type or dump id.
+
+		Each dump has the following files:
+		id:		An ASCII representation of the dump ID
+				in hex (e.g. '0x01')
+		type:		An ASCII representation of the type of
+				dump in the format "0x%x %s" with the ID
+				in hex and a description of the dump type
+				(or 'unknown').
+				Type '0xffffffff unknown' is used when
+				we could not get the type from firmware.
+				e.g. '0x02 System/Platform Dump'
+		dump:		A binary file containing the dump.
+				The size of the dump is the size of this file.
+		acknowledge:	When 'ack' is written to this, we will
+				acknowledge that we've retrieved the
+				dump to the service processor. It will
+				then remove it, making the dump
+				inaccessible.
+				Reading this file will get a list of
+				supported actions.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-opal-elog b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-opal-elog
new file mode 100644
index 0000000..2536434
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-firmware-opal-elog
@@ -0,0 +1,60 @@
+What:		/sys/firmware/opal/elog
+Date:		Feb 2014
+Contact:	Stewart Smith <stewart@linux.vnet.ibm.com>
+Description:
+		This directory exposes error log entries retrieved
+		through the OPAL firmware interface.
+
+		Each error log is identified by a unique ID and will
+		exist until explicitly acknowledged to firmware.
+
+		Each log entry has a directory in /sys/firmware/opal/elog.
+
+		Log entries may be purged by the service processor
+		before retrieved by firmware or retrieved/acknowledged by
+		Linux if there is no room for more log entries.
+
+		In the event that Linux has retrieved the log entries
+		but not explicitly acknowledged them to firmware and
+		the service processor needs more room for log entries,
+		the only remaining copy of a log message may be in
+		Linux.
+
+		Typically, a user space daemon will monitor for new
+		entries, read them out and acknowledge them.
+
+		The service processor may be able to store more log
+		entries than firmware can, so after you acknowledge
+		an event from Linux you may instantly get another one
+		from the queue that was generated some time in the past.
+
+		The raw log format is a binary format. We currently
+		do not parse this at all in kernel, leaving it up to
+		user space to solve the problem. In future, we may
+		do more parsing in kernel and add more files to make
+		it easier for simple user space processes to extract
+		more information.
+
+		For each log entry (directory), there are the following
+		files:
+
+		id:		An ASCII representation of the ID of the
+				error log, in hex - e.g. "0x01".
+
+		type:		An ASCII representation of the type id and
+				description of the type of error log.
+				Currently just "0x00 PEL" - platform error log.
+				In the future there may be additional types.
+
+		raw:		A read-only binary file that can be read
+				to get the raw log entry. These are
+				<16kb, often just hundreds of bytes and
+				"average" 2kb.
+
+		acknowledge:	Writing 'ack' to this file will acknowledge
+				the error log to firmware (and in turn
+				the service processor, if applicable).
+				Shortly after acknowledging it, the log
+				entry will be removed from sysfs.
+				Reading this file will list the supported
+				operations (currently just acknowledge).
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-fs-orangefs b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-fs-orangefs
new file mode 100644
index 0000000..affdb11
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-fs-orangefs
@@ -0,0 +1,87 @@
+What:			/sys/fs/orangefs/perf_counters/*
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			Counters and settings for various caches.
+			Read only.
+
+
+What:			/sys/fs/orangefs/perf_counter_reset
+Date:			June 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			echo a 0 or a 1 into perf_counter_reset to
+			reset all the counters in
+			/sys/fs/orangefs/perf_counters
+			except ones with PINT_PERF_PRESERVE set.
+
+
+What:			/sys/fs/orangefs/perf_time_interval_secs
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			Length of perf counter intervals in
+			seconds.
+
+
+What:			/sys/fs/orangefs/perf_history_size
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			The perf_counters cache statistics have N, or
+			perf_history_size, samples. The default is
+			one.
+
+			Every perf_time_interval_secs the (first)
+			samples are reset.
+
+			If N is greater than one, the "current" set
+			of samples is reset, and the samples from the
+			other N-1 intervals remain available.
+
+
+What:			/sys/fs/orangefs/op_timeout_secs
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			Service operation timeout in seconds.
+
+
+What:			/sys/fs/orangefs/slot_timeout_secs
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			"Slot" timeout in seconds. A "slot"
+			is an indexed buffer in the shared
+			memory segment used for communication
+			between the kernel module and userspace.
+			Slots are requested and waited for,
+			the wait times out after slot_timeout_secs.
+
+
+What:			/sys/fs/orangefs/acache/*
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			Attribute cache configurable settings.
+
+
+What:			/sys/fs/orangefs/ncache/*
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			Name cache configurable settings.
+
+
+What:			/sys/fs/orangefs/capcache/*
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			Capability cache configurable settings.
+
+
+What:			/sys/fs/orangefs/ccache/*
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			Credential cache configurable settings.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-hypervisor-xen b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-hypervisor-xen
new file mode 100644
index 0000000..3cf5cdf
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-hypervisor-xen
@@ -0,0 +1,119 @@
+What:		/sys/hypervisor/compilation/compile_date
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Contains the build time stamp of the Xen hypervisor
+		Might return "<denied>" in case of special security settings
+		in the hypervisor.
+
+What:		/sys/hypervisor/compilation/compiled_by
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Contains information who built the Xen hypervisor
+		Might return "<denied>" in case of special security settings
+		in the hypervisor.
+
+What:		/sys/hypervisor/compilation/compiler
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Compiler which was used to build the Xen hypervisor
+		Might return "<denied>" in case of special security settings
+		in the hypervisor.
+
+What:		/sys/hypervisor/properties/capabilities
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Space separated list of supported guest system types. Each type
+		is in the format: <class>-<major>.<minor>-<arch>
+		With:
+			<class>: "xen" -- x86: paravirtualized, arm: standard
+				 "hvm" -- x86 only: fully virtualized
+			<major>: major guest interface version
+			<minor>: minor guest interface version
+			<arch>:  architecture, e.g.:
+				 "x86_32": 32 bit x86 guest without PAE
+				 "x86_32p": 32 bit x86 guest with PAE
+				 "x86_64": 64 bit x86 guest
+				 "armv7l": 32 bit arm guest
+				 "aarch64": 64 bit arm guest
+
+What:		/sys/hypervisor/properties/changeset
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Changeset of the hypervisor (git commit)
+		Might return "<denied>" in case of special security settings
+		in the hypervisor.
+
+What:		/sys/hypervisor/properties/features
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Features the Xen hypervisor supports for the guest as defined
+		in include/xen/interface/features.h printed as a hex value.
+
+What:		/sys/hypervisor/properties/pagesize
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Default page size of the hypervisor printed as a hex value.
+		Might return "0" in case of special security settings
+		in the hypervisor.
+
+What:		/sys/hypervisor/properties/virtual_start
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Virtual address of the hypervisor as a hex value.
+
+What:		/sys/hypervisor/type
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Type of hypervisor:
+		"xen": Xen hypervisor
+
+What:		/sys/hypervisor/uuid
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		UUID of the guest as known to the Xen hypervisor.
+
+What:		/sys/hypervisor/version/extra
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		The Xen version is in the format <major>.<minor><extra>
+		This is the <extra> part of it.
+		Might return "<denied>" in case of special security settings
+		in the hypervisor.
+
+What:		/sys/hypervisor/version/major
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		The Xen version is in the format <major>.<minor><extra>
+		This is the <major> part of it.
+
+What:		/sys/hypervisor/version/minor
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		The Xen version is in the format <major>.<minor><extra>
+		This is the <minor> part of it.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-module b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-module
new file mode 100644
index 0000000..6272ae5
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-module
@@ -0,0 +1,34 @@
+What:		/sys/module
+Description:
+	The /sys/module tree consists of the following structure:
+
+	/sys/module/MODULENAME
+		The name of the module that is in the kernel.  This
+		module name will always show up if the module is loaded as a
+		dynamic module.  If it is built directly into the kernel, it
+		will only show up if it has a version or at least one
+		parameter.
+
+		Note: The conditions of creation in the built-in case are not
+		by design and may be removed in the future.
+
+	/sys/module/MODULENAME/parameters
+		This directory contains individual files that are each
+		individual parameters of the module that are able to be
+		changed at runtime.  See the individual module
+		documentation as to the contents of these parameters and
+		what they accomplish.
+
+		Note: The individual parameter names and values are not
+		considered stable, only the fact that they will be
+		placed in this location within sysfs.  See the
+		individual driver documentation for details as to the
+		stability of the different parameters.
+
+	/sys/module/MODULENAME/refcnt
+		If the module is able to be unloaded from the kernel, this file
+		will contain the current reference count of the module.
+
+		Note: If the module is built into the kernel, or if the
+		CONFIG_MODULE_UNLOAD kernel configuration value is not enabled,
+		this file will not be present.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-transport-srp b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-transport-srp
new file mode 100644
index 0000000..ec7af69
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/sysfs-transport-srp
@@ -0,0 +1,58 @@
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/delete
+Date:		June 1, 2012
+KernelVersion:	3.7
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Instructs an SRP initiator to disconnect from a target and to
+		remove all LUNs imported from that target.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/dev_loss_tmo
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Number of seconds the SCSI layer will wait after a transport
+		layer error has been observed before removing a target port.
+		Zero means immediate removal. Setting this attribute to "off"
+		will disable the dev_loss timer.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/fast_io_fail_tmo
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Number of seconds the SCSI layer will wait after a transport
+		layer error has been observed before failing I/O. Zero means
+		failing I/O immediately. Setting this attribute to "off" will
+		disable the fast_io_fail timer.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/port_id
+Date:		June 27, 2007
+KernelVersion:	2.6.24
+Contact:	linux-scsi@vger.kernel.org
+Description:	16-byte local SRP port identifier in hexadecimal format. An
+		example: 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/reconnect_delay
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Number of seconds the SCSI layer will wait after a reconnect
+		attempt failed before retrying. Setting this attribute to
+		"off" will disable time-based reconnecting.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/roles
+Date:		June 27, 2007
+KernelVersion:	2.6.24
+Contact:	linux-scsi@vger.kernel.org
+Description:	Role of the remote port. Either "SRP Initiator" or "SRP Target".
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/state
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	State of the transport layer used for communication with the
+		remote port. "running" if the transport layer is operational;
+		"blocked" if a transport layer error has been encountered but
+		the fast_io_fail_tmo timer has not yet fired; "fail-fast"
+		after the fast_io_fail_tmo timer has fired and before the
+		"dev_loss_tmo" timer has fired; "lost" after the
+		"dev_loss_tmo" timer has fired and before the port is finally
+		removed.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/thermal-notification b/src/kernel/linux/v4.14/Documentation/ABI/stable/thermal-notification
new file mode 100644
index 0000000..9723e8b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/thermal-notification
@@ -0,0 +1,4 @@
+What:		A notification mechanism for thermal related events
+Description:
+	This interface enables notification for thermal related events.
+	The notification is in the form of a netlink event.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/stable/vdso b/src/kernel/linux/v4.14/Documentation/ABI/stable/vdso
new file mode 100644
index 0000000..55406ec
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/stable/vdso
@@ -0,0 +1,28 @@
+On some architectures, when the kernel loads any userspace program it
+maps an ELF DSO into that program's address space.  This DSO is called
+the vDSO and it often contains useful and highly-optimized alternatives
+to real syscalls.
+
+These functions are called just like ordinary C function according to
+your platform's ABI.  Call them from a sensible context.  (For example,
+if you set CS on x86 to something strange, the vDSO functions are
+within their rights to crash.)  In addition, if you pass a bad
+pointer to a vDSO function, you might get SIGSEGV instead of -EFAULT.
+
+To find the DSO, parse the auxiliary vector passed to the program's
+entry point.  The AT_SYSINFO_EHDR entry will point to the vDSO.
+
+The vDSO uses symbol versioning; whenever you request a symbol from the
+vDSO, specify the version you are expecting.
+
+Programs that dynamically link to glibc will use the vDSO automatically.
+Otherwise, you can use the reference parser in
+tools/testing/selftests/vDSO/parse_vdso.c.
+
+Unless otherwise noted, the set of symbols with any given version and the
+ABI of those symbols is considered stable.  It may vary across architectures,
+though.
+
+(As of this writing, this ABI documentation as been confirmed for x86_64.
+ The maintainers of the other vDSO-using architectures should confirm
+ that it is correct for their architecture.)
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-acpi b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-acpi
new file mode 100644
index 0000000..4ab4e99
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-acpi
@@ -0,0 +1,36 @@
+What:		/config/acpi
+Date:		July 2016
+KernelVersion:	4.8
+Contact:	linux-acpi@vger.kernel.org
+Description:
+		This represents the ACPI subsystem entry point directory. It
+		contains sub-groups corresponding to ACPI configurable options.
+
+What:		/config/acpi/table
+Date:		July 2016
+KernelVersion:	4.8
+Description:
+
+		This group contains the configuration for user defined ACPI
+		tables. The attributes of a user define table are:
+
+		aml 		- a binary attribute that the user can use to
+				fill in the ACPI aml definitions. Once the aml
+				data is written to this file and the file is
+				closed the table will be loaded and ACPI devices
+				will be enumerated. To check if the operation is
+				successful the user must check the error code
+				for close(). If the operation is successful,
+				subsequent writes to this attribute will fail.
+
+		The rest of the attributes are read-only and are valid only
+		after the table has been loaded by filling the aml entry:
+
+		signature 	- ASCII table signature
+		length 		- length of table in bytes, including the header
+		revision 	- ACPI Specification minor version number
+		oem_id 		- ASCII OEM identification
+		oem_table_id 	- ASCII OEM table identification
+		oem_revision 	- OEM revision number
+		asl_compiler_id - ASCII ASL compiler vendor ID
+		asl_compiler_revision - ASL compiler version
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-iio b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-iio
new file mode 100644
index 0000000..aebda53
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-iio
@@ -0,0 +1,34 @@
+What:		/config/iio
+Date:		October 2015
+KernelVersion:	4.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This represents Industrial IO configuration entry point
+		directory. It contains sub-groups corresponding to IIO
+		objects.
+
+What:		/config/iio/triggers
+Date:		October 2015
+KernelVersion:	4.4
+Description:
+		Industrial IO software triggers directory.
+
+What:		/config/iio/triggers/hrtimers
+Date:		October 2015
+KernelVersion:	4.4
+Description:
+		High resolution timers directory. Creating a directory here
+		will result in creating a hrtimer trigger in the IIO subsystem.
+
+What:		/config/iio/devices
+Date:		April 2016
+KernelVersion:	4.7
+Description:
+		Industrial IO software devices directory.
+
+What:		/config/iio/devices/dummy
+Date:		April 2016
+KernelVersion:	4.7
+Description:
+		Dummy IIO devices directory. Creating a directory here will result
+		in creating a dummy IIO device in the IIO subystem.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-rdma_cm b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-rdma_cm
new file mode 100644
index 0000000..74f9506
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-rdma_cm
@@ -0,0 +1,30 @@
+What: 		/config/rdma_cm
+Date: 		November 29, 2015
+KernelVersion:  4.4.0
+Description: 	Interface is used to configure RDMA-cable HCAs in respect to
+		RDMA-CM attributes.
+
+		Attributes are visible only when configfs is mounted. To mount
+		configfs in /config directory use:
+		# mount -t configfs none /config/
+
+		In order to set parameters related to a specific HCA, a directory
+		for this HCA has to be created:
+		mkdir -p /config/rdma_cm/<hca>
+
+
+What: 		/config/rdma_cm/<hca>/ports/<port-num>/default_roce_mode
+Date: 		November 29, 2015
+KernelVersion:  4.4.0
+Description: 	RDMA-CM based connections from HCA <hca> at port <port-num>
+		will be initiated with this RoCE type as default.
+		The possible RoCE types are either "IB/RoCE v1" or "RoCE v2".
+		This parameter has RW access.
+
+What: 		/config/rdma_cm/<hca>/ports/<port-num>/default_roce_tos
+Date: 		February 7, 2017
+KernelVersion:  4.11.0
+Description: 	RDMA-CM QPs from HCA <hca> at port <port-num>
+		will be created with this TOS as default.
+		This can be overridden by using the rdma_set_option API.
+		The possible RoCE TOS values are 0-255.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-spear-pcie-gadget b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-spear-pcie-gadget
new file mode 100644
index 0000000..840c324
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-spear-pcie-gadget
@@ -0,0 +1,31 @@
+What:		/config/pcie-gadget
+Date:		Feb 2011
+KernelVersion:	2.6.37
+Contact:	Pratyush Anand <pratyush.anand@gmail.com>
+Description:
+
+	Interface is used to configure selected dual mode PCIe controller
+	as device and then program its various registers to configure it
+	as a particular device type.
+	This interfaces can be used to show spear's PCIe device capability.
+
+	Nodes are only visible when configfs is mounted. To mount configfs
+	in /config directory use:
+	# mount -t configfs none /config/
+
+	For nth PCIe Device Controller
+	/config/pcie-gadget.n/
+		link ... used to enable ltssm and read its status.
+		int_type ...used to configure and read type of supported
+			interrupt
+		no_of_msi ... used to configure number of MSI vector needed and
+			to read no of MSI granted.
+		inta ... write 1 to assert INTA and 0 to de-assert.
+		send_msi ... write MSI vector to be sent.
+		vendor_id ... used to write and read vendor id (hex)
+		device_id ... used to write and read device id (hex)
+		bar0_size ... used to write and read bar0_size
+		bar0_address ... used to write and read bar0 mapped area in hex.
+		bar0_rw_offset ... used to write and read offset of bar0 where
+			bar0_data will be written or read.
+		bar0_data ... used to write and read data at bar0_rw_offset.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-stp-policy b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-stp-policy
new file mode 100644
index 0000000..421ce68
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-stp-policy
@@ -0,0 +1,48 @@
+What:		/config/stp-policy
+Date:		June 2015
+KernelVersion:	4.3
+Description:
+		This group contains policies mandating Master/Channel allocation
+		for software sources wishing to send trace data over an STM
+		device.
+
+What:		/config/stp-policy/<device>.<policy>
+Date:		June 2015
+KernelVersion:	4.3
+Description:
+		This group is the root of a policy; its name is a concatenation
+		of an stm device name to which this policy applies and an
+		arbitrary string. If <device> part doesn't match an existing
+		stm device, mkdir will fail with ENODEV; if that device already
+		has a policy assigned to it, mkdir will fail with EBUSY.
+
+What:		/config/stp-policy/<device>.<policy>/device
+Date:		June 2015
+KernelVersion:	4.3
+Description:
+		STM device to which this policy applies, read only. Same as the
+		<device> component of its parent directory.
+
+What:		/config/stp-policy/<device>.<policy>/<node>
+Date:		June 2015
+KernelVersion:	4.3
+Description:
+		Policy node is a string identifier that software clients will
+		use to request a master/channel to be allocated and assigned to
+		them.
+
+What:		/config/stp-policy/<device>.<policy>/<node>/masters
+Date:		June 2015
+KernelVersion:	4.3
+Description:
+		Range of masters from which to allocate for users of this node.
+		Write two numbers: the first master and the last master number.
+
+What:		/config/stp-policy/<device>.<policy>/<node>/channels
+Date:		June 2015
+KernelVersion:	4.3
+Description:
+		Range of channels from which to allocate for users of this node.
+		Write two numbers: the first channel and the last channel
+		number.
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget
new file mode 100644
index 0000000..95a3658
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget
@@ -0,0 +1,126 @@
+What:		/config/usb-gadget
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		This group contains sub-groups corresponding to created
+		USB gadgets.
+
+What:		/config/usb-gadget/gadget
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+
+		The attributes of a gadget:
+
+		UDC		- bind a gadget to UDC/unbind a gadget;
+				write UDC's name found in /sys/class/udc/*
+				to bind a gadget, empty string "" to unbind.
+
+		bDeviceClass	- USB device class code
+		bDeviceSubClass	- USB device subclass code
+		bDeviceProtocol	- USB device protocol code
+		bMaxPacketSize0	- maximum endpoint 0 packet size
+		bcdDevice	- bcd device release number
+		bcdUSB		- bcd USB specification version number
+		idProduct	- product ID
+		idVendor	- vendor ID
+
+What:		/config/usb-gadget/gadget/configs
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		This group contains a USB gadget's configurations
+
+What:		/config/usb-gadget/gadget/configs/config
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		The attributes of a configuration:
+
+		bmAttributes	- configuration characteristics
+		MaxPower	- maximum power consumption from the bus
+
+What:		/config/usb-gadget/gadget/configs/config/strings
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		This group contains subdirectories for language-specific
+		strings for this configuration.
+
+What:		/config/usb-gadget/gadget/configs/config/strings/language
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		The attributes:
+
+		configuration	- configuration description
+
+
+What:		/config/usb-gadget/gadget/functions
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		This group contains functions available to this USB gadget.
+
+What:		/config/usb-gadget/gadget/functions/<func>.<inst>/interface.<n>
+Date:		May 2014
+KernelVersion:	3.16
+Description:
+		This group contains "Feature Descriptors" specific for one
+		gadget's USB interface or one interface group described
+		by an IAD.
+
+		The attributes:
+
+		compatible_id		- 8-byte string for "Compatible ID"
+		sub_compatible_id	- 8-byte string for "Sub Compatible ID"
+
+What:		/config/usb-gadget/gadget/functions/<func>.<inst>/interface.<n>/<property>
+Date:		May 2014
+KernelVersion:	3.16
+Description:
+		This group contains "Extended Property Descriptors" specific for one
+		gadget's USB interface or one interface group described
+		by an IAD.
+
+		The attributes:
+
+		type		- value 1..7 for interpreting the data
+				1: unicode string
+				2: unicode string with environment variable
+				3: binary
+				4: little-endian 32-bit
+				5: big-endian 32-bit
+				6: unicode string with a symbolic link
+				7: multiple unicode strings
+		data		- blob of data to be interpreted depending on
+				type
+
+What:		/config/usb-gadget/gadget/strings
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		This group contains subdirectories for language-specific
+		strings for this gadget.
+
+What:		/config/usb-gadget/gadget/strings/language
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		The attributes:
+
+		serialnumber	- gadget's serial number (string)
+		product		- gadget's product description
+		manufacturer	- gadget's manufacturer description
+
+What:		/config/usb-gadget/gadget/os_desc
+Date:		May 2014
+KernelVersion:	3.16
+Description:
+		This group contains "OS String" extension handling attributes.
+
+		use		- flag turning "OS Desctiptors" support on/off
+		b_vendor_code	- one-byte value used for custom per-device and
+				per-interface requests
+		qw_sign		- an identifier to be reported as "OS String"
+				proper
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-acm b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-acm
new file mode 100644
index 0000000..d21092d
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-acm
@@ -0,0 +1,8 @@
+What:		/config/usb-gadget/gadget/functions/acm.name
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+
+		This item contains just one readonly attribute: port_num.
+		It contains the port number of the /dev/ttyGS<n> device
+		associated with acm function's instance "name".
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-ecm b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-ecm
new file mode 100644
index 0000000..0addf77
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-ecm
@@ -0,0 +1,16 @@
+What:		/config/usb-gadget/gadget/functions/ecm.name
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link
+
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-eem b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-eem
new file mode 100644
index 0000000..a4c5715
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-eem
@@ -0,0 +1,14 @@
+What:		/config/usb-gadget/gadget/functions/eem.name
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-ffs b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-ffs
new file mode 100644
index 0000000..e39b276
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-ffs
@@ -0,0 +1,9 @@
+What:		/config/usb-gadget/gadget/functions/ffs.name
+Date:		Nov 2013
+KernelVersion:	3.13
+Description:	The purpose of this directory is to create and remove it.
+
+		A corresponding USB function instance is created/removed.
+		There are no attributes here.
+
+		All parameters are set through FunctionFS.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-hid b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-hid
new file mode 100644
index 0000000..f12e00e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-hid
@@ -0,0 +1,11 @@
+What:		/config/usb-gadget/gadget/functions/hid.name
+Date:		Nov 2014
+KernelVersion:	3.19
+Description:
+		The attributes:
+
+		protocol	- HID protocol to use
+		report_desc	- blob corresponding to HID report descriptors
+				except the data passed through /dev/hidg<N>
+		report_length	- HID report length
+		subclass	- HID device subclass to use
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-loopback b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-loopback
new file mode 100644
index 0000000..06beefb
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-loopback
@@ -0,0 +1,8 @@
+What:		/config/usb-gadget/gadget/functions/Loopback.name
+Date:		Nov 2013
+KernelVersion:	3.13
+Description:
+		The attributes:
+
+		qlen		- depth of loopback queue
+		buflen		- buffer length
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-mass-storage b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-mass-storage
new file mode 100644
index 0000000..9931fb0
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-mass-storage
@@ -0,0 +1,31 @@
+What:		/config/usb-gadget/gadget/functions/mass_storage.name
+Date:		Oct 2013
+KernelVersion:	3.13
+Description:
+		The attributes:
+
+		stall		- Set to permit function to halt bulk endpoints.
+				Disabled on some USB devices known not to work
+				correctly. You should set it to true.
+		num_buffers	- Number of pipeline buffers. Valid numbers
+				are 2..4. Available only if
+				CONFIG_USB_GADGET_DEBUG_FILES is set.
+
+What:		/config/usb-gadget/gadget/functions/mass_storage.name/lun.name
+Date:		Oct 2013
+KernelVersion:	3.13
+Description:
+		The attributes:
+
+		file		- The path to the backing file for the LUN.
+				Required if LUN is not marked as removable.
+		ro		- Flag specifying access to the LUN shall be
+				read-only. This is implied if CD-ROM emulation
+				is enabled as well as when it was impossible
+				to open "filename" in R/W mode.
+		removable	- Flag specifying that LUN shall be indicated as
+				being removable.
+		cdrom		- Flag specifying that LUN shall be reported as
+				being a CD-ROM.
+		nofua		- Flag specifying that FUA flag
+				in SCSI WRITE(10,12)
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-midi b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-midi
new file mode 100644
index 0000000..6b341df
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-midi
@@ -0,0 +1,12 @@
+What:		/config/usb-gadget/gadget/functions/midi.name
+Date:		Nov 2014
+KernelVersion:	3.19
+Description:
+		The attributes:
+
+		index		- index value for the USB MIDI adapter
+		id		- ID string for the USB MIDI adapter
+		buflen		- MIDI buffer length
+		qlen		- USB read request queue length
+		in_ports	- number of MIDI input ports
+		out_ports	- number of MIDI output ports
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-ncm b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-ncm
new file mode 100644
index 0000000..6fe723e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-ncm
@@ -0,0 +1,15 @@
+What:		/config/usb-gadget/gadget/functions/ncm.name
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-obex b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-obex
new file mode 100644
index 0000000..a6a9327
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-obex
@@ -0,0 +1,9 @@
+What:		/config/usb-gadget/gadget/functions/obex.name
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+
+		This item contains just one readonly attribute: port_num.
+		It contains the port number of the /dev/ttyGS<n> device
+		associated with obex function's instance "name".
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-phonet b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-phonet
new file mode 100644
index 0000000..7037a35
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-phonet
@@ -0,0 +1,8 @@
+What:		/config/usb-gadget/gadget/functions/phonet.name
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+
+		This item contains just one readonly attribute: ifname.
+		It contains the network interface name assigned during
+		network device registration.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-printer b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-printer
new file mode 100644
index 0000000..6b0714e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-printer
@@ -0,0 +1,9 @@
+What:		/config/usb-gadget/gadget/functions/printer.name
+Date:		Apr 2015
+KernelVersion:	4.1
+Description:
+		The attributes:
+
+		pnp_string	- Data to be passed to the host in pnp string
+		q_len		- Number of requests per endpoint
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-rndis b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-rndis
new file mode 100644
index 0000000..1373990
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-rndis
@@ -0,0 +1,17 @@
+What:		/config/usb-gadget/gadget/functions/rndis.name
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link
+		class		- USB interface class, default is 02 (hex)
+		subclass	- USB interface subclass, default is 06 (hex)
+		protocol	- USB interface protocol, default is 00 (hex)
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-serial b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-serial
new file mode 100644
index 0000000..474d249
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-serial
@@ -0,0 +1,9 @@
+What:		/config/usb-gadget/gadget/functions/gser.name
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+
+		This item contains just one readonly attribute: port_num.
+		It contains the port number of the /dev/ttyGS<n> device
+		associated with gser function's instance "name".
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-sourcesink b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
new file mode 100644
index 0000000..f56335a
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
@@ -0,0 +1,14 @@
+What:		/config/usb-gadget/gadget/functions/SourceSink.name
+Date:		Nov 2013
+KernelVersion:	3.13
+Description:
+		The attributes:
+
+		pattern		- 0 (all zeros), 1 (mod63), 2 (none)
+		isoc_interval	- 1..16
+		isoc_maxpacket	- 0 - 1023 (fs), 0 - 1024 (hs/ss)
+		isoc_mult	- 0..2 (hs/ss only)
+		isoc_maxburst	- 0..15 (ss only)
+		buflen		- buffer length
+		bulk_qlen	- depth of queue for bulk
+		iso_qlen	- depth of queue for iso
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-subset b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-subset
new file mode 100644
index 0000000..9373e2c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-subset
@@ -0,0 +1,14 @@
+What:		/config/usb-gadget/gadget/functions/geth.name
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-tcm b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-tcm
new file mode 100644
index 0000000..a29ed2d
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-tcm
@@ -0,0 +1,6 @@
+What:		/config/usb-gadget/gadget/functions/tcm.name
+Date:		Dec 2015
+KernelVersion:	4.5
+Description:
+		There are no attributes because all the configuration
+		is performed in the "target" subsystem of configfs.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-uac1 b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-uac1
new file mode 100644
index 0000000..abfe447
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-uac1
@@ -0,0 +1,14 @@
+What:		/config/usb-gadget/gadget/functions/uac1.name
+Date:		June 2017
+KernelVersion:	4.14
+Description:
+		The attributes:
+
+		c_chmask - capture channel mask
+		c_srate - capture sampling rate
+		c_ssize - capture sample size (bytes)
+		p_chmask - playback channel mask
+		p_srate - playback sampling rate
+		p_ssize - playback sample size (bytes)
+		req_number - the number of pre-allocated request
+			for both capture and playback
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-uac1_legacy b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-uac1_legacy
new file mode 100644
index 0000000..b2eaefd
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-uac1_legacy
@@ -0,0 +1,12 @@
+What:		/config/usb-gadget/gadget/functions/uac1_legacy.name
+Date:		Sep 2014
+KernelVersion:	3.18
+Description:
+		The attributes:
+
+		audio_buf_size - audio buffer size
+		fn_cap - capture pcm device file name
+		fn_cntl - control device file name
+		fn_play - playback pcm device file name
+		req_buf_size - ISO OUT endpoint request buffer size
+		req_count - ISO OUT endpoint request count
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-uac2 b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-uac2
new file mode 100644
index 0000000..2bfdd4e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-uac2
@@ -0,0 +1,12 @@
+What:		/config/usb-gadget/gadget/functions/uac2.name
+Date:		Sep 2014
+KernelVersion:	3.18
+Description:
+		The attributes:
+
+		c_chmask - capture channel mask
+		c_srate - capture sampling rate
+		c_ssize - capture sample size (bytes)
+		p_chmask - playback channel mask
+		p_srate - playback sampling rate
+		p_ssize - playback sample size (bytes)
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-uvc b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-uvc
new file mode 100644
index 0000000..1ba0d0f
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/configfs-usb-gadget-uvc
@@ -0,0 +1,265 @@
+What:		/config/usb-gadget/gadget/functions/uvc.name
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	UVC function directory
+
+		streaming_maxburst	- 0..15 (ss only)
+		streaming_maxpacket	- 1..1023 (fs), 1..3072 (hs/ss)
+		streaming_interval	- 1..16
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/control
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Control descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/control/class
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Class descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/control/class/ss
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Super speed control class descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/control/class/fs
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Full speed control class descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/control/terminal
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Terminal descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/control/terminal/output
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Output terminal descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/control/terminal/output/default
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Default output terminal descriptors
+
+		All attributes read only:
+		iTerminal	- index of string descriptor
+		bSourceID 	- id of the terminal to which this terminal
+				is connected
+		bAssocTerminal	- id of the input terminal to which this output
+				terminal is associated
+		wTerminalType	- terminal type
+		bTerminalID	- a non-zero id of this terminal
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Camera terminal descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera/default
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Default camera terminal descriptors
+
+		All attributes read only:
+		bmControls		- bitmap specifying which controls are
+					supported for the video stream
+		wOcularFocalLength	- the value of Locular
+		wObjectiveFocalLengthMax- the value of Lmin
+		wObjectiveFocalLengthMin- the value of Lmax
+		iTerminal		- index of string descriptor
+		bAssocTerminal		- id of the output terminal to which
+					this terminal is connected
+		wTerminalType		- terminal type
+		bTerminalID		- a non-zero id of this terminal
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/control/processing
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Processing unit descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/control/processing/default
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Default processing unit descriptors
+
+		All attributes read only:
+		iProcessing	- index of string descriptor
+		bmControls	- bitmap specifying which controls are
+				supported for the video stream
+		wMaxMultiplier	- maximum digital magnification x100
+		bSourceID	- id of the terminal to which this unit is
+				connected
+		bUnitID		- a non-zero id of this unit
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/control/header
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Control header descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/control/header/name
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Specific control header descriptors
+
+dwClockFrequency
+bcdUVC
+What:		/config/usb-gadget/gadget/functions/uvc.name/streaming
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Streaming descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/class
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Streaming class descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/class/ss
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Super speed streaming class descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/class/hs
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	High speed streaming class descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/class/fs
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Full speed streaming class descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/color_matching
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Color matching descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/color_matching/default
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Default color matching descriptors
+
+		All attributes read only:
+		bMatrixCoefficients	- matrix used to compute luma and
+					chroma values from the color primaries
+		bTransferCharacteristics- optoelectronic transfer
+					characteristic of the source picutre,
+					also called the gamma function
+		bColorPrimaries		- color primaries and the reference
+					white
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	MJPEG format descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Specific MJPEG format descriptors
+
+		All attributes read only,
+		except bmaControls and bDefaultFrameIndex:
+		bmaControls		- this format's data for bmaControls in
+					the streaming header
+		bmInterfaceFlags	- specifies interlace information,
+					read-only
+		bAspectRatioY		- the X dimension of the picture aspect
+					ratio, read-only
+		bAspectRatioX		- the Y dimension of the picture aspect
+					ratio, read-only
+		bmFlags			- characteristics of this format,
+					read-only
+		bDefaultFrameIndex	- optimum frame index for this stream
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name/name
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Specific MJPEG frame descriptors
+
+		dwFrameInterval		- indicates how frame interval can be
+					programmed; a number of values
+					separated by newline can be specified
+		dwDefaultFrameInterval	- the frame interval the device would
+					like to use as default
+		dwMaxVideoFrameBufferSize- the maximum number of bytes the
+					compressor will produce for a video
+					frame or still image
+		dwMaxBitRate		- the maximum bit rate at the shortest
+					frame interval in bps
+		dwMinBitRate		- the minimum bit rate at the longest
+					frame interval in bps
+		wHeight			- height of decoded bitmap frame in px
+		wWidth			- width of decoded bitmam frame in px
+		bmCapabilities		- still image support, fixed frame-rate
+					support
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Uncompressed format descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Specific uncompressed format descriptors
+
+		bmaControls		- this format's data for bmaControls in
+					the streaming header
+		bmInterfaceFlags	- specifies interlace information,
+					read-only
+		bAspectRatioY		- the X dimension of the picture aspect
+					ratio, read-only
+		bAspectRatioX		- the Y dimension of the picture aspect
+					ratio, read-only
+		bDefaultFrameIndex	- optimum frame index for this stream
+		bBitsPerPixel		- number of bits per pixel used to
+					specify color in the decoded video
+					frame
+		guidFormat		- globally unique id used to identify
+					stream-encoding format
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name/name
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Specific uncompressed frame descriptors
+
+		dwFrameInterval		- indicates how frame interval can be
+					programmed; a number of values
+					separated by newline can be specified
+		dwDefaultFrameInterval	- the frame interval the device would
+					like to use as default
+		dwMaxVideoFrameBufferSize- the maximum number of bytes the
+					compressor will produce for a video
+					frame or still image
+		dwMaxBitRate		- the maximum bit rate at the shortest
+					frame interval in bps
+		dwMinBitRate		- the minimum bit rate at the longest
+					frame interval in bps
+		wHeight			- height of decoded bitmap frame in px
+		wWidth			- width of decoded bitmam frame in px
+		bmCapabilities		- still image support, fixed frame-rate
+					support
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/header
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Streaming header descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/header/name
+Date:		Dec 2014
+KernelVersion:	4.0
+Description:	Specific streaming header descriptors
+
+		All attributes read only:
+		bTriggerUsage		- how the host software will respond to
+					a hardware trigger interrupt event
+		bTriggerSupport		- flag specifying if hardware
+					triggering is supported
+		bStillCaptureMethod	- method of still image caputre
+					supported
+		bTerminalLink		- id of the output terminal to which
+					the video endpoint of this interface
+					is connected
+		bmInfo			- capabilities of this video streaming
+					interface
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-driver-genwqe b/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-driver-genwqe
new file mode 100644
index 0000000..1c2f256
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-driver-genwqe
@@ -0,0 +1,91 @@
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/ddcb_info
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    DDCB queue dump used for debugging queueing problems.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/curr_regs
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Dump of the current error registers.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/curr_dbg_uid0
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID0 (unit id 0).
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/curr_dbg_uid1
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID1.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/curr_dbg_uid2
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID2.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/prev_regs
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Dump of the error registers before the last reset of
+                the card occured.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/prev_dbg_uid0
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID0 before card was reset.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/prev_dbg_uid1
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID1 before card was reset.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/prev_dbg_uid2
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID2 before card was reset.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/info
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Comprehensive summary of bitstream version and software
+                version. Used bitstream and bitstream clocking information.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/err_inject
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Possibility to inject error cases to ensure that the drivers
+                error handling code works well.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/vf<0..14>_jobtimeout_msec
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Default VF timeout 250ms. Testing might require 1000ms.
+                Using 0 will use the cards default value (whatever that is).
+
+                The timeout depends on the max number of available cards
+                in the system and the maximum allowed queue size.
+
+                The driver ensures that the settings are done just before
+                the VFs get enabled. Changing the timeouts in flight is not
+                possible.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/jobtimer
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Dump job timeout register values for PF and VFs.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/queue_working_time
+Date:           Dec 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Dump queue working time register values for PF and VFs.
+                Only available for PF.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-ec b/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-ec
new file mode 100644
index 0000000..6546115
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-ec
@@ -0,0 +1,20 @@
+What:		/sys/kernel/debug/ec/*/{gpe,use_global_lock,io}
+Date:		July 2010
+Contact:	Thomas Renninger <trenn@suse.de>
+Description:
+
+General information like which GPE is assigned to the EC and whether
+the global lock should get used.
+Knowing the EC GPE one can watch the amount of HW events related to
+the EC here (XY -> GPE number from /sys/kernel/debug/ec/*/gpe):
+/sys/firmware/acpi/interrupts/gpeXY
+
+The io file is binary and a userspace tool located here:
+ftp://ftp.suse.com/pub/people/trenn/sources/ec/
+should get used to read out the 256 Embedded Controller registers
+or writing to them.
+
+CAUTION: Do not write to the Embedded Controller if you don't know
+what you are doing! Rebooting afterwards also is a good idea.
+This can influence the way your machine is cooled and fans may
+not get switched on again after you did a wrong write.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-ideapad b/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-ideapad
new file mode 100644
index 0000000..7079c0b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-ideapad
@@ -0,0 +1,19 @@
+What:		/sys/kernel/debug/ideapad/cfg
+Date:		Sep 2011
+KernelVersion:	3.2
+Contact:	Ike Panhc <ike.pan@canonical.com>
+Description:
+
+cfg shows the return value of _CFG method in VPC2004 device. It tells machine
+capability and what graphic component within the machine.
+
+
+What:		/sys/kernel/debug/ideapad/status
+Date:		Sep 2011
+KernelVersion:	3.2
+Contact:	Ike Panhc <ike.pan@canonical.com>
+Description:
+
+status shows infos we can read and tells its meaning and value.
+
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-olpc b/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-olpc
new file mode 100644
index 0000000..bd76cc6
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-olpc
@@ -0,0 +1,16 @@
+What:		/sys/kernel/debug/olpc-ec/cmd
+Date:		Dec 2011
+KernelVersion:	3.4
+Contact:	devel@lists.laptop.org
+Description:
+
+A generic interface for executing OLPC Embedded Controller commands and
+reading their responses.
+
+To execute a command, write data with the format: CC:N A A A A
+CC is the (hex) command, N is the count of expected reply bytes, and A A A A
+are optional (hex) arguments.
+
+To read the response (if any), read from the generic node after executing
+a command. Hex reply bytes will be returned, *whether or not* they came from
+the immediately previous command.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-pfo-nx-crypto b/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-pfo-nx-crypto
new file mode 100644
index 0000000..685d5a4
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-pfo-nx-crypto
@@ -0,0 +1,45 @@
+What:		/sys/kernel/debug/nx-crypto/*
+Date:		March 2012
+KernelVersion:	3.4
+Contact:	Kent Yoder <key@linux.vnet.ibm.com>
+Description:
+
+  These debugfs interfaces are built by the nx-crypto driver, built in
+arch/powerpc/crypto/nx.
+
+Error Detection
+===============
+
+errors:
+- A u32 providing a total count of errors since the driver was loaded. The
+only errors counted here are those returned from the hcall, H_COP_OP.
+
+last_error:
+- The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not
+recorded here (the hcall will retry until -EBUSY goes away).
+
+last_error_pid:
+- The process ID of the process who received the most recent error from the
+hcall.
+
+Device Use
+==========
+
+aes_bytes:
+- The total number of bytes encrypted using AES in any of the driver's
+supported modes.
+
+aes_ops:
+- The total number of AES operations submitted to the hardware.
+
+sha256_bytes:
+- The total number of bytes hashed by the hardware using SHA-256.
+
+sha256_ops:
+- The total number of SHA-256 operations submitted to the hardware.
+
+sha512_bytes:
+- The total number of bytes hashed by the hardware using SHA-512.
+
+sha512_ops:
+- The total number of SHA-512 operations submitted to the hardware.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-pktcdvd b/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-pktcdvd
new file mode 100644
index 0000000..cf11736
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/debugfs-pktcdvd
@@ -0,0 +1,19 @@
+What:           /sys/kernel/debug/pktcdvd/pktcdvd[0-7]
+Date:           Oct. 2006
+KernelVersion:  2.6.20
+Contact:        Thomas Maier <balagi@justmail.de>
+Description:
+
+debugfs interface
+-----------------
+
+The pktcdvd module (packet writing driver) creates
+these files in debugfs:
+
+/sys/kernel/debug/pktcdvd/pktcdvd[0-7]/
+    info            (0444) Lots of driver statistics and infos.
+
+Example:
+-------
+
+cat /sys/kernel/debug/pktcdvd/pktcdvd0/info
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/dev-kmsg b/src/kernel/linux/v4.14/Documentation/ABI/testing/dev-kmsg
new file mode 100644
index 0000000..fff817e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/dev-kmsg
@@ -0,0 +1,110 @@
+What:		/dev/kmsg
+Date:		Mai 2012
+KernelVersion:	3.5
+Contact:	Kay Sievers <kay@vrfy.org>
+Description:	The /dev/kmsg character device node provides userspace access
+		to the kernel's printk buffer.
+
+		Injecting messages:
+		Every write() to the opened device node places a log entry in
+		the kernel's printk buffer.
+
+		The logged line can be prefixed with a <N> syslog prefix, which
+		carries the syslog priority and facility. The single decimal
+		prefix number is composed of the 3 lowest bits being the syslog
+		priority and the higher bits the syslog facility number.
+
+		If no prefix is given, the priority number is the default kernel
+		log priority and the facility number is set to LOG_USER (1). It
+		is not possible to inject messages from userspace with the
+		facility number LOG_KERN (0), to make sure that the origin of
+		the messages can always be reliably determined.
+
+		Accessing the buffer:
+		Every read() from the opened device node receives one record
+		of the kernel's printk buffer.
+
+		The first read() directly following an open() always returns
+		first message in the buffer; there is no kernel-internal
+		persistent state; many readers can concurrently open the device
+		and read from it, without affecting other readers.
+
+		Every read() will receive the next available record. If no more
+		records are available read() will block, or if O_NONBLOCK is
+		used -EAGAIN returned.
+
+		Messages in the record ring buffer get overwritten as whole,
+		there are never partial messages received by read().
+
+		In case messages get overwritten in the circular buffer while
+		the device is kept open, the next read() will return -EPIPE,
+		and the seek position be updated to the next available record.
+		Subsequent reads() will return available records again.
+
+		Unlike the classic syslog() interface, the 64 bit record
+		sequence numbers allow to calculate the amount of lost
+		messages, in case the buffer gets overwritten. And they allow
+		to reconnect to the buffer and reconstruct the read position
+		if needed, without limiting the interface to a single reader.
+
+		The device supports seek with the following parameters:
+		SEEK_SET, 0
+		  seek to the first entry in the buffer
+		SEEK_END, 0
+		  seek after the last entry in the buffer
+		SEEK_DATA, 0
+		  seek after the last record available at the time
+		  the last SYSLOG_ACTION_CLEAR was issued.
+
+		The output format consists of a prefix carrying the syslog
+		prefix including priority and facility, the 64 bit message
+		sequence number and the monotonic timestamp in microseconds,
+		and a flag field. All fields are separated by a ','.
+
+		Future extensions might add more comma separated values before
+		the terminating ';'. Unknown fields and values should be
+		gracefully ignored.
+
+		The human readable text string starts directly after the ';'
+		and is terminated by a '\n'. Untrusted values derived from
+		hardware or other facilities are printed, therefore
+		all non-printable characters and '\' itself in the log message
+		are escaped by "\x00" C-style hex encoding.
+
+		A line starting with ' ', is a continuation line, adding
+		key/value pairs to the log message, which provide the machine
+		readable context of the message, for reliable processing in
+		userspace.
+
+		Example:
+		7,160,424069,-;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
+		 SUBSYSTEM=acpi
+		 DEVICE=+acpi:PNP0A03:00
+		6,339,5140900,-;NET: Registered protocol family 10
+		30,340,5690716,-;udevd[80]: starting version 181
+
+		The DEVICE= key uniquely identifies devices the following way:
+		  b12:8        - block dev_t
+		  c127:3       - char dev_t
+		  n8           - netdev ifindex
+		  +sound:card0 - subsystem:devname
+
+		The flags field carries '-' by default. A 'c' indicates a
+		fragment of a line. All following fragments are flagged with
+		'+'. Note, that these hints about continuation lines are not
+		necessarily correct, and the stream could be interleaved with
+		unrelated messages, but merging the lines in the output
+		usually produces better human readable results. A similar
+		logic is used internally when messages are printed to the
+		console, /proc/kmsg or the syslog() syscall.
+
+		By default, kernel tries to avoid fragments by concatenating
+		when it can and fragments are rare; however, when extended
+		console support is enabled, the in-kernel concatenation is
+		disabled and /dev/kmsg output will contain more fragments. If
+		the log consumer performs concatenation, the end result
+		should be the same. In the future, the in-kernel concatenation
+		may be removed entirely and /dev/kmsg users are recommended to
+		implement fragment handling.
+
+Users:		dmesg(1), userspace kernel log consumers
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/evm b/src/kernel/linux/v4.14/Documentation/ABI/testing/evm
new file mode 100644
index 0000000..8374d45
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/evm
@@ -0,0 +1,23 @@
+What:		security/evm
+Date:		March 2011
+Contact:	Mimi Zohar <zohar@us.ibm.com>
+Description:
+		EVM protects a file's security extended attributes(xattrs)
+		against integrity attacks. The initial method maintains an
+		HMAC-sha1 value across the extended attributes, storing the
+		value as the extended attribute 'security.evm'.
+
+		EVM depends on the Kernel Key Retention System to provide it
+		with a trusted/encrypted key for the HMAC-sha1 operation.
+		The key is loaded onto the root's keyring using keyctl.  Until
+		EVM receives notification that the key has been successfully
+		loaded onto the keyring (echo 1 > <securityfs>/evm), EVM
+		can not create or validate the 'security.evm' xattr, but
+		returns INTEGRITY_UNKNOWN.  Loading the key and signaling EVM
+		should be done as early as possible.  Normally this is done
+		in the initramfs, which has already been measured as part
+		of the trusted boot.  For more information on creating and
+		loading existing trusted/encrypted keys, refer to:
+		Documentation/keys-trusted-encrypted.txt.  (A sample dracut
+		patch, which loads the trusted/encrypted key and enables
+		EVM, is available from http://linux-ima.sourceforge.net/#EVM.)
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/gpio-cdev b/src/kernel/linux/v4.14/Documentation/ABI/testing/gpio-cdev
new file mode 100644
index 0000000..7b265fb
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/gpio-cdev
@@ -0,0 +1,26 @@
+What:		/dev/gpiochip[0-9]+
+Date:		November 2015
+KernelVersion:	4.4
+Contact:	linux-gpio@vger.kernel.org
+Description:
+		The character device files /dev/gpiochip* are the interface
+		between GPIO chips and userspace.
+
+		The ioctl(2)-based ABI is defined and documented in
+		[include/uapi]<linux/gpio.h>.
+
+		The following file operations are supported:
+
+		open(2)
+		Currently the only useful flags are O_RDWR.
+
+		ioctl(2)
+		Initiate various actions.
+		See the inline documentation in [include/uapi]<linux/gpio.h>
+		for descriptions of all ioctls.
+
+		close(2)
+		Stops and free up the I/O contexts that was associated
+		with the file descriptor.
+
+Users:		TBD
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/ima_policy b/src/kernel/linux/v4.14/Documentation/ABI/testing/ima_policy
new file mode 100644
index 0000000..e76432b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/ima_policy
@@ -0,0 +1,104 @@
+What:		security/ima/policy
+Date:		May 2008
+Contact:	Mimi Zohar <zohar@us.ibm.com>
+Description:
+		The Trusted Computing Group(TCG) runtime Integrity
+		Measurement Architecture(IMA) maintains a list of hash
+		values of executables and other sensitive system files
+		loaded into the run-time of this system.  At runtime,
+		the policy can be constrained based on LSM specific data.
+		Policies are loaded into the securityfs file ima/policy
+		by opening the file, writing the rules one at a time and
+		then closing the file.  The new policy takes effect after
+		the file ima/policy is closed.
+
+		IMA appraisal, if configured, uses these file measurements
+		for local measurement appraisal.
+
+		rule format: action [condition ...]
+
+		action: measure | dont_measure | appraise | dont_appraise | audit
+		condition:= base | lsm  [option]
+			base:	[[func=] [mask=] [fsmagic=] [fsuuid=] [uid=]
+				[euid=] [fowner=]]
+			lsm:	[[subj_user=] [subj_role=] [subj_type=]
+				 [obj_user=] [obj_role=] [obj_type=]]
+			option:	[[appraise_type=]] [permit_directio]
+
+		base: 	func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK]
+				[FIRMWARE_CHECK]
+				[KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK]
+			mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND]
+			       [[^]MAY_EXEC]
+			fsmagic:= hex value
+			fsuuid:= file system UUID (e.g 8bcbe394-4f13-4144-be8e-5aa9ea2ce2f6)
+			uid:= decimal value
+			euid:= decimal value
+			fowner:= decimal value
+		lsm:  	are LSM specific
+		option:	appraise_type:= [imasig]
+			pcr:= decimal value
+
+		default policy:
+			# PROC_SUPER_MAGIC
+			dont_measure fsmagic=0x9fa0
+			dont_appraise fsmagic=0x9fa0
+			# SYSFS_MAGIC
+			dont_measure fsmagic=0x62656572
+			dont_appraise fsmagic=0x62656572
+			# DEBUGFS_MAGIC
+			dont_measure fsmagic=0x64626720
+			dont_appraise fsmagic=0x64626720
+			# TMPFS_MAGIC
+			dont_measure fsmagic=0x01021994
+			dont_appraise fsmagic=0x01021994
+			# RAMFS_MAGIC
+			dont_appraise fsmagic=0x858458f6
+			# DEVPTS_SUPER_MAGIC
+			dont_measure fsmagic=0x1cd1
+			dont_appraise fsmagic=0x1cd1
+			# BINFMTFS_MAGIC
+			dont_measure fsmagic=0x42494e4d
+			dont_appraise fsmagic=0x42494e4d
+			# SECURITYFS_MAGIC
+			dont_measure fsmagic=0x73636673
+			dont_appraise fsmagic=0x73636673
+			# SELINUX_MAGIC
+			dont_measure fsmagic=0xf97cff8c
+			dont_appraise fsmagic=0xf97cff8c
+			# CGROUP_SUPER_MAGIC
+			dont_measure fsmagic=0x27e0eb
+			dont_appraise fsmagic=0x27e0eb
+			# NSFS_MAGIC
+			dont_measure fsmagic=0x6e736673
+			dont_appraise fsmagic=0x6e736673
+
+			measure func=BPRM_CHECK
+			measure func=FILE_MMAP mask=MAY_EXEC
+			measure func=FILE_CHECK mask=MAY_READ uid=0
+			measure func=MODULE_CHECK
+			measure func=FIRMWARE_CHECK
+			appraise fowner=0
+
+		The default policy measures all executables in bprm_check,
+		all files mmapped executable in file_mmap, and all files
+		open for read by root in do_filp_open.  The default appraisal
+		policy appraises all files owned by root.
+
+		Examples of LSM specific definitions:
+
+		SELinux:
+			dont_measure obj_type=var_log_t
+			dont_appraise obj_type=var_log_t
+			dont_measure obj_type=auditd_log_t
+			dont_appraise obj_type=auditd_log_t
+			measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
+			measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
+
+		Smack:
+			measure subj_user=_ func=FILE_CHECK mask=MAY_READ
+
+		Example of measure rules using alternate PCRs:
+
+			measure func=KEXEC_KERNEL_CHECK pcr=4
+			measure func=KEXEC_INITRAMFS_CHECK pcr=5
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/ppc-memtrace b/src/kernel/linux/v4.14/Documentation/ABI/testing/ppc-memtrace
new file mode 100644
index 0000000..2e8b937
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/ppc-memtrace
@@ -0,0 +1,45 @@
+What:		/sys/kernel/debug/powerpc/memtrace
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	This folder contains the relevant debugfs files for the
+		hardware trace macro to use. CONFIG_PPC64_HARDWARE_TRACING
+		must be set.
+
+What:		/sys/kernel/debug/powerpc/memtrace/enable
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	Write an integer containing the size in bytes of the memory
+		you want removed from each NUMA node to this file - it must be
+		aligned to the memblock size. This amount of RAM will be removed
+		from the kernel mappings and the following debugfs files will be
+		created. This can only be successfully done once per boot. Once
+		memory is successfully removed from each node, the following
+		files are created.
+
+What:		/sys/kernel/debug/powerpc/memtrace/<node-id>
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	This directory contains information about the removed memory
+		from the specific NUMA node.
+
+What:		/sys/kernel/debug/powerpc/memtrace/<node-id>/size
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	This contains the size of the memory removed from the node.
+
+What:		/sys/kernel/debug/powerpc/memtrace/<node-id>/start
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	This contains the start address of the removed memory.
+
+What:		/sys/kernel/debug/powerpc/memtrace/<node-id>/trace
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	This is where the hardware trace macro will output the trace
+		it generates.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/procfs-diskstats b/src/kernel/linux/v4.14/Documentation/ABI/testing/procfs-diskstats
new file mode 100644
index 0000000..f91a973
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/procfs-diskstats
@@ -0,0 +1,22 @@
+What:		/proc/diskstats
+Date:		February 2008
+Contact:	Jerome Marchand <jmarchan@redhat.com>
+Description:
+		The /proc/diskstats file displays the I/O statistics
+		of block devices. Each line contains the following 14
+		fields:
+		 1 - major number
+		 2 - minor mumber
+		 3 - device name
+		 4 - reads completed successfully
+		 5 - reads merged
+		 6 - sectors read
+		 7 - time spent reading (ms)
+		 8 - writes completed
+		 9 - writes merged
+		10 - sectors written
+		11 - time spent writing (ms)
+		12 - I/Os currently in progress
+		13 - time spent doing I/Os (ms)
+		14 - weighted time spent doing I/Os (ms)
+		For more details refer to Documentation/iostats.txt
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/procfs-smaps_rollup b/src/kernel/linux/v4.14/Documentation/ABI/testing/procfs-smaps_rollup
new file mode 100644
index 0000000..0a54ed0
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/procfs-smaps_rollup
@@ -0,0 +1,31 @@
+What:		/proc/pid/smaps_rollup
+Date:		August 2017
+Contact:	Daniel Colascione <dancol@google.com>
+Description:
+		This file provides pre-summed memory information for a
+		process.  The format is identical to /proc/pid/smaps,
+		except instead of an entry for each VMA in a process,
+		smaps_rollup has a single entry (tagged "[rollup]")
+		for which each field is the sum of the corresponding
+		fields from all the maps in /proc/pid/smaps.
+		For more details, see the procfs man page.
+
+		Typical output looks like this:
+
+		00100000-ff709000 ---p 00000000 00:00 0		 [rollup]
+		Rss:		     884 kB
+		Pss:		     385 kB
+		Shared_Clean:	     696 kB
+		Shared_Dirty:	       0 kB
+		Private_Clean:	     120 kB
+		Private_Dirty:	      68 kB
+		Referenced:	     884 kB
+		Anonymous:	      68 kB
+		LazyFree:	       0 kB
+		AnonHugePages:	       0 kB
+		ShmemPmdMapped:	       0 kB
+		Shared_Hugetlb:	       0 kB
+		Private_Hugetlb:       0 kB
+		Swap:		       0 kB
+		SwapPss:	       0 kB
+		Locked:		     385 kB
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/pstore b/src/kernel/linux/v4.14/Documentation/ABI/testing/pstore
new file mode 100644
index 0000000..5fca9f5
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/pstore
@@ -0,0 +1,47 @@
+Where:		/sys/fs/pstore/... (or /dev/pstore/...)
+Date:		March 2011
+Kernel Version: 2.6.39
+Contact:	tony.luck@intel.com
+Description:	Generic interface to platform dependent persistent storage.
+
+		Platforms that provide a mechanism to preserve some data
+		across system reboots can register with this driver to
+		provide a generic interface to show records captured in
+		the dying moments.  In the case of a panic the last part
+		of the console log is captured, but other interesting
+		data can also be saved.
+
+		# mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore
+
+		$ ls -l /sys/fs/pstore/
+		total 0
+		-r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1
+
+		Different users of this interface will result in different
+		filename prefixes.  Currently two are defined:
+
+		"dmesg"	- saved console log
+		"mce"	- architecture dependent data from fatal h/w error
+
+		Once the information in a file has been read, removing
+		the file will signal to the underlying persistent storage
+		device that it can reclaim the space for later re-use.
+
+		$ rm /sys/fs/pstore/dmesg-erst-1
+
+		The expectation is that all files in /sys/fs/pstore/
+		will be saved elsewhere and erased from persistent store
+		soon after boot to free up space ready for the next
+		catastrophe.
+
+		The 'kmsg_bytes' mount option changes the target amount of
+		data saved on each oops/panic. Pstore saves (possibly
+		multiple) files based on the record size of the underlying
+		persistent storage until at least this amount is reached.
+		Default is 10 Kbytes.
+
+		Pstore only supports one backend at a time. If multiple
+		backends are available, the preferred backend may be
+		set by passing the pstore.backend= argument to the kernel at
+		boot time.
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-ata b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-ata
new file mode 100644
index 0000000..aa42964
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-ata
@@ -0,0 +1,110 @@
+What:		/sys/class/ata_...
+Date:		August 2008
+Contact:	Gwendal Grignou<gwendal@google.com>
+Description:
+
+Provide a place in sysfs for storing the ATA topology of the system.  This allows
+retrieving various information about ATA objects.
+
+Files under /sys/class/ata_port
+-------------------------------
+
+	For each port, a directory ataX is created where X is the ata_port_id of
+	the port. The device parent is the ata host device.
+
+idle_irq (read)
+
+	Number of IRQ received by the port while idle [some ata HBA only].
+
+nr_pmp_links (read)
+
+	If a SATA Port Multiplier (PM) is connected, number of link behind it.
+
+Files under /sys/class/ata_link
+-------------------------------
+
+	Behind each port, there is a ata_link. If there is a SATA PM in the
+	topology, 15 ata_link objects are created.
+
+	If a link is behind a port, the directory name is linkX, where X is
+	ata_port_id of the port.
+	If a link is behind a PM, its name is linkX.Y where X is ata_port_id
+	of the parent port and Y the PM port.
+
+hw_sata_spd_limit
+
+	Maximum speed supported by the connected SATA device.
+
+sata_spd_limit
+
+	Maximum speed imposed by libata.
+
+sata_spd
+
+	Current speed of the link [1.5, 3Gps,...].
+
+Files under /sys/class/ata_device
+---------------------------------
+
+	Behind each link, up to two ata device are created.
+	The name of the directory is devX[.Y].Z where:
+	- X is ata_port_id of the port where the device is connected,
+	- Y the port of the PM if any, and
+	- Z the device id: for PATA, there is usually 2 devices [0,1],
+	only 1 for SATA.
+
+class
+	Device class. Can be "ata" for disk, "atapi" for packet device,
+	"pmp" for PM, or "none" if no device was found behind the link.
+
+dma_mode
+
+	Transfer modes supported by the device when in DMA mode.
+	Mostly used by PATA device.
+
+pio_mode
+
+	Transfer modes supported by the device when in PIO mode.
+	Mostly used by PATA device.
+
+xfer_mode
+
+	Current transfer mode.
+
+id
+
+	Cached result of IDENTIFY command, as described in ATA8 7.16 and 7.17.
+	Only valid if the device is not a PM.
+
+gscr
+
+	Cached result of the dump of PM GSCR register.
+	Valid registers are:
+	0: 	SATA_PMP_GSCR_PROD_ID,
+	1: 	SATA_PMP_GSCR_REV,
+	2: 	SATA_PMP_GSCR_PORT_INFO,
+	32:	SATA_PMP_GSCR_ERROR,
+	33:	SATA_PMP_GSCR_ERROR_EN,
+	64:	SATA_PMP_GSCR_FEAT,
+	96:	SATA_PMP_GSCR_FEAT_EN,
+	130:	SATA_PMP_GSCR_SII_GPIO
+	Only valid if the device is a PM.
+
+trim
+
+	Shows the DSM TRIM mode currently used by the device. Valid
+	values are:
+	unsupported:		Drive does not support DSM TRIM
+	unqueued:		Drive supports unqueued DSM TRIM only
+	queued:			Drive supports queued DSM TRIM
+	forced_unqueued:	Drive's queued DSM support is known to be
+				buggy and only unqueued TRIM commands
+				are sent
+
+spdn_cnt
+
+	Number of time libata decided to lower the speed of link due to errors.
+
+ering
+
+	Formatted output of the error ring of the device.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-block b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-block
new file mode 100644
index 0000000..dea212d
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-block
@@ -0,0 +1,273 @@
+What:		/sys/block/<disk>/stat
+Date:		February 2008
+Contact:	Jerome Marchand <jmarchan@redhat.com>
+Description:
+		The /sys/block/<disk>/stat files displays the I/O
+		statistics of disk <disk>. They contain 11 fields:
+		 1 - reads completed successfully
+		 2 - reads merged
+		 3 - sectors read
+		 4 - time spent reading (ms)
+		 5 - writes completed
+		 6 - writes merged
+		 7 - sectors written
+		 8 - time spent writing (ms)
+		 9 - I/Os currently in progress
+		10 - time spent doing I/Os (ms)
+		11 - weighted time spent doing I/Os (ms)
+		For more details refer Documentation/iostats.txt
+
+
+What:		/sys/block/<disk>/<part>/stat
+Date:		February 2008
+Contact:	Jerome Marchand <jmarchan@redhat.com>
+Description:
+		The /sys/block/<disk>/<part>/stat files display the
+		I/O statistics of partition <part>. The format is the
+		same as the above-written /sys/block/<disk>/stat
+		format.
+
+
+What:		/sys/block/<disk>/integrity/format
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Metadata format for integrity capable block device.
+		E.g. T10-DIF-TYPE1-CRC.
+
+
+What:		/sys/block/<disk>/integrity/read_verify
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Indicates whether the block layer should verify the
+		integrity of read requests serviced by devices that
+		support sending integrity metadata.
+
+
+What:		/sys/block/<disk>/integrity/tag_size
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Number of bytes of integrity tag space available per
+		512 bytes of data.
+
+
+What:		/sys/block/<disk>/integrity/device_is_integrity_capable
+Date:		July 2014
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Indicates whether a storage device is capable of storing
+		integrity metadata. Set if the device is T10 PI-capable.
+
+What:		/sys/block/<disk>/integrity/protection_interval_bytes
+Date:		July 2015
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Describes the number of data bytes which are protected
+		by one integrity tuple. Typically the device's logical
+		block size.
+
+What:		/sys/block/<disk>/integrity/write_generate
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Indicates whether the block layer should automatically
+		generate checksums for write requests bound for
+		devices that support receiving integrity metadata.
+
+What:		/sys/block/<disk>/alignment_offset
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a physical block size that is
+		bigger than the logical block size (for instance a drive
+		with 4KB physical sectors exposing 512-byte logical
+		blocks to the operating system).  This parameter
+		indicates how many bytes the beginning of the device is
+		offset from the disk's natural alignment.
+
+What:		/sys/block/<disk>/<partition>/alignment_offset
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a physical block size that is
+		bigger than the logical block size (for instance a drive
+		with 4KB physical sectors exposing 512-byte logical
+		blocks to the operating system).  This parameter
+		indicates how many bytes the beginning of the partition
+		is offset from the disk's natural alignment.
+
+What:		/sys/block/<disk>/queue/logical_block_size
+Date:		May 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		This is the smallest unit the storage device can
+		address.  It is typically 512 bytes.
+
+What:		/sys/block/<disk>/queue/physical_block_size
+Date:		May 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		This is the smallest unit a physical storage device can
+		write atomically.  It is usually the same as the logical
+		block size but may be bigger.  One example is SATA
+		drives with 4KB sectors that expose a 512-byte logical
+		block size to the operating system.  For stacked block
+		devices the physical_block_size variable contains the
+		maximum physical_block_size of the component devices.
+
+What:		/sys/block/<disk>/queue/minimum_io_size
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a granularity or preferred
+		minimum I/O size which is the smallest request the
+		device can perform without incurring a performance
+		penalty.  For disk drives this is often the physical
+		block size.  For RAID arrays it is often the stripe
+		chunk size.  A properly aligned multiple of
+		minimum_io_size is the preferred request size for
+		workloads where a high number of I/O operations is
+		desired.
+
+What:		/sys/block/<disk>/queue/optimal_io_size
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report an optimal I/O size, which is
+		the device's preferred unit for sustained I/O.  This is
+		rarely reported for disk drives.  For RAID arrays it is
+		usually the stripe width or the internal track size.  A
+		properly aligned multiple of optimal_io_size is the
+		preferred request size for workloads where sustained
+		throughput is desired.  If no optimal I/O size is
+		reported this file contains 0.
+
+What:		/sys/block/<disk>/queue/nomerges
+Date:		January 2010
+Contact:
+Description:
+		Standard I/O elevator operations include attempts to
+		merge contiguous I/Os. For known random I/O loads these
+		attempts will always fail and result in extra cycles
+		being spent in the kernel. This allows one to turn off
+		this behavior on one of two ways: When set to 1, complex
+		merge checks are disabled, but the simple one-shot merges
+		with the previous I/O request are enabled. When set to 2,
+		all merge tries are disabled. The default value is 0 -
+		which enables all types of merge tries.
+
+What:		/sys/block/<disk>/discard_alignment
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may
+		internally allocate space in units that are bigger than
+		the exported logical block size. The discard_alignment
+		parameter indicates how many bytes the beginning of the
+		device is offset from the internal allocation unit's
+		natural alignment.
+
+What:		/sys/block/<disk>/<partition>/discard_alignment
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may
+		internally allocate space in units that are bigger than
+		the exported logical block size. The discard_alignment
+		parameter indicates how many bytes the beginning of the
+		partition is offset from the internal allocation unit's
+		natural alignment.
+
+What:		/sys/block/<disk>/queue/discard_granularity
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may
+		internally allocate space using units that are bigger
+		than the logical block size. The discard_granularity
+		parameter indicates the size of the internal allocation
+		unit in bytes if reported by the device. Otherwise the
+		discard_granularity will be set to match the device's
+		physical block size. A discard_granularity of 0 means
+		that the device does not support discard functionality.
+
+What:		/sys/block/<disk>/queue/discard_max_bytes
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may have
+		internal limits on the number of bytes that can be
+		trimmed or unmapped in a single operation. Some storage
+		protocols also have inherent limits on the number of
+		blocks that can be described in a single command. The
+		discard_max_bytes parameter is set by the device driver
+		to the maximum number of bytes that can be discarded in
+		a single operation. Discard requests issued to the
+		device must not exceed this limit. A discard_max_bytes
+		value of 0 means that the device does not support
+		discard functionality.
+
+What:		/sys/block/<disk>/queue/discard_zeroes_data
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Will always return 0.  Don't rely on any specific behavior
+		for discards, and don't read this file.
+
+What:		/sys/block/<disk>/queue/write_same_max_bytes
+Date:		January 2012
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Some devices support a write same operation in which a
+		single data block can be written to a range of several
+		contiguous blocks on storage. This can be used to wipe
+		areas on disk or to initialize drives in a RAID
+		configuration. write_same_max_bytes indicates how many
+		bytes can be written in a single write same command. If
+		write_same_max_bytes is 0, write same is not supported
+		by the device.
+
+What:		/sys/block/<disk>/queue/write_zeroes_max_bytes
+Date:		November 2016
+Contact:	Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
+Description:
+		Devices that support write zeroes operation in which a
+		single request can be issued to zero out the range of
+		contiguous blocks on storage without having any payload
+		in the request. This can be used to optimize writing zeroes
+		to the devices. write_zeroes_max_bytes indicates how many
+		bytes can be written in a single write zeroes command. If
+		write_zeroes_max_bytes is 0, write zeroes is not supported
+		by the device.
+
+What:		/sys/block/<disk>/queue/zoned
+Date:		September 2016
+Contact:	Damien Le Moal <damien.lemoal@hgst.com>
+Description:
+		zoned indicates if the device is a zoned block device
+		and the zone model of the device if it is indeed zoned.
+		The possible values indicated by zoned are "none" for
+		regular block devices and "host-aware" or "host-managed"
+		for zoned block devices. The characteristics of
+		host-aware and host-managed zoned block devices are
+		described in the ZBC (Zoned Block Commands) and ZAC
+		(Zoned Device ATA Command Set) standards. These standards
+		also define the "drive-managed" zone model. However,
+		since drive-managed zoned block devices do not support
+		zone commands, they will be treated as regular block
+		devices and zoned will report "none".
+
+What:		/sys/block/<disk>/queue/chunk_sectors
+Date:		September 2016
+Contact:	Hannes Reinecke <hare@suse.com>
+Description:
+		chunk_sectors has different meaning depending on the type
+		of the disk. For a RAID device (dm-raid), chunk_sectors
+		indicates the size in 512B sectors of the RAID volume
+		stripe segment. For a zoned block device, either
+		host-aware or host-managed, chunk_sectors indicates the
+		size of 512B sectors of the zones of the device, with
+		the eventual exception of the last zone of the device
+		which may be smaller.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-block-bcache b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-block-bcache
new file mode 100644
index 0000000..9e4bbc5
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-block-bcache
@@ -0,0 +1,156 @@
+What:		/sys/block/<disk>/bcache/unregister
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		A write to this file causes the backing device or cache to be
+		unregistered. If a backing device had dirty data in the cache,
+		writeback mode is automatically disabled and all dirty data is
+		flushed before the device is unregistered. Caches unregister
+		all associated backing devices before unregistering themselves.
+
+What:		/sys/block/<disk>/bcache/clear_stats
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		Writing to this file resets all the statistics for the device.
+
+What:		/sys/block/<disk>/bcache/cache
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a backing device that has cache, a symlink to
+		the bcache/ dir of that cache.
+
+What:		/sys/block/<disk>/bcache/cache_hits
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: integer number of full cache hits,
+		counted per bio. A partial cache hit counts as a miss.
+
+What:		/sys/block/<disk>/bcache/cache_misses
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: integer number of cache misses.
+
+What:		/sys/block/<disk>/bcache/cache_hit_ratio
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: cache hits as a percentage.
+
+What:		/sys/block/<disk>/bcache/sequential_cutoff
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: Threshold past which sequential IO will
+		skip the cache. Read and written as bytes in human readable
+		units (i.e. echo 10M > sequntial_cutoff).
+
+What:		/sys/block/<disk>/bcache/bypassed
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		Sum of all reads and writes that have bypassed the cache (due
+		to the sequential cutoff).  Expressed as bytes in human
+		readable units.
+
+What:		/sys/block/<disk>/bcache/writeback
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: When on, writeback caching is enabled and
+		writes will be buffered in the cache. When off, caching is in
+		writethrough mode; reads and writes will be added to the
+		cache but no write buffering will take place.
+
+What:		/sys/block/<disk>/bcache/writeback_running
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: when off, dirty data will not be written
+		from the cache to the backing device. The cache will still be
+		used to buffer writes until it is mostly full, at which point
+		writes transparently revert to writethrough mode. Intended only
+		for benchmarking/testing.
+
+What:		/sys/block/<disk>/bcache/writeback_delay
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: In writeback mode, when dirty data is
+		written to the cache and the cache held no dirty data for that
+		backing device, writeback from cache to backing device starts
+		after this delay, expressed as an integer number of seconds.
+
+What:		/sys/block/<disk>/bcache/writeback_percent
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: If nonzero, writeback from cache to
+		backing device only takes place when more than this percentage
+		of the cache is used, allowing more write coalescing to take
+		place and reducing total number of writes sent to the backing
+		device. Integer between 0 and 40.
+
+What:		/sys/block/<disk>/bcache/synchronous
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, a boolean that allows synchronous mode to be
+		switched on and off. In synchronous mode all writes are ordered
+		such that the cache can reliably recover from unclean shutdown;
+		if disabled bcache will not generally wait for writes to
+		complete but if the cache is not shut down cleanly all data
+		will be discarded from the cache. Should not be turned off with
+		writeback caching enabled.
+
+What:		/sys/block/<disk>/bcache/discard
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, a boolean allowing discard/TRIM to be turned off
+		or back on if the device supports it.
+
+What:		/sys/block/<disk>/bcache/bucket_size
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, bucket size in human readable units, as set at
+		cache creation time; should match the erase block size of the
+		SSD for optimal performance.
+
+What:		/sys/block/<disk>/bcache/nbuckets
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, the number of usable buckets.
+
+What:		/sys/block/<disk>/bcache/tree_depth
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, height of the btree excluding leaf nodes (i.e. a
+		one node tree will have a depth of 0).
+
+What:		/sys/block/<disk>/bcache/btree_cache_size
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		Number of btree buckets/nodes that are currently cached in
+		memory; cache dynamically grows and shrinks in response to
+		memory pressure from the rest of the system.
+
+What:		/sys/block/<disk>/bcache/written
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, total amount of data in human readable units
+		written to the cache, excluding all metadata.
+
+What:		/sys/block/<disk>/bcache/btree_written
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, sum of all btree writes in human readable units.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-block-dm b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-block-dm
new file mode 100644
index 0000000..f9f2339
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-block-dm
@@ -0,0 +1,47 @@
+What:		/sys/block/dm-<num>/dm/name
+Date:		January 2009
+KernelVersion:	2.6.29
+Contact:	dm-devel@redhat.com
+Description:	Device-mapper device name.
+		Read-only string containing mapped device name.
+Users:		util-linux, device-mapper udev rules
+
+What:		/sys/block/dm-<num>/dm/uuid
+Date:		January 2009
+KernelVersion:	2.6.29
+Contact:	dm-devel@redhat.com
+Description:	Device-mapper device UUID.
+		Read-only string containing DM-UUID or empty string
+		if DM-UUID is not set.
+Users:		util-linux, device-mapper udev rules
+
+What:		/sys/block/dm-<num>/dm/suspended
+Date:		June 2009
+KernelVersion:	2.6.31
+Contact:	dm-devel@redhat.com
+Description:	Device-mapper device suspend state.
+		Contains the value 1 while the device is suspended.
+		Otherwise it contains 0. Read-only attribute.
+Users:		util-linux, device-mapper udev rules
+
+What:		/sys/block/dm-<num>/dm/rq_based_seq_io_merge_deadline
+Date:		March 2015
+KernelVersion:	4.1
+Contact:	dm-devel@redhat.com
+Description:	Allow control over how long a request that is a
+		reasonable merge candidate can be queued on the request
+		queue.  The resolution of this deadline is in
+		microseconds (ranging from 1 to 100000 usecs).
+		Setting this attribute to 0 (the default) will disable
+		request-based DM's merge heuristic and associated extra
+		accounting.  This attribute is not applicable to
+		bio-based DM devices so it will only ever report 0 for
+		them.
+
+What:		/sys/block/dm-<num>/dm/use_blk_mq
+Date:		March 2015
+KernelVersion:	4.1
+Contact:	dm-devel@redhat.com
+Description:	Request-based Device-mapper blk-mq I/O path mode.
+		Contains the value 1 if the device is using blk-mq.
+		Otherwise it contains 0. Read-only attribute.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-block-rssd b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-block-rssd
new file mode 100644
index 0000000..beef30c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-block-rssd
@@ -0,0 +1,5 @@
+What:           /sys/block/rssd*/status
+Date:           April 2012
+KernelVersion:  3.4
+Contact:        Asai Thambi S P <asamymuthupa@micron.com>
+Description:    This is a read-only file. Indicates the status of the device.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-block-zram b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-block-zram
new file mode 100644
index 0000000..c1513c7
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-block-zram
@@ -0,0 +1,100 @@
+What:		/sys/block/zram<id>/disksize
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The disksize file is read-write and specifies the disk size
+		which represents the limit on the *uncompressed* worth of data
+		that can be stored in this disk.
+		Unit: bytes
+
+What:		/sys/block/zram<id>/initstate
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The initstate file is read-only and shows the initialization
+		state of the device.
+
+What:		/sys/block/zram<id>/reset
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The reset file is write-only and allows resetting the
+		device. The reset operation frees all the memory associated
+		with this device.
+
+What:		/sys/block/zram<id>/max_comp_streams
+Date:		February 2014
+Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Description:
+		The max_comp_streams file is read-write and specifies the
+		number of backend's zcomp_strm compression streams (number of
+		concurrent compress operations).
+
+What:		/sys/block/zram<id>/comp_algorithm
+Date:		February 2014
+Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Description:
+		The comp_algorithm file is read-write and lets to show
+		available and selected compression algorithms, change
+		compression algorithm selection.
+
+What:		/sys/block/zram<id>/mem_used_max
+Date:		August 2014
+Contact:	Minchan Kim <minchan@kernel.org>
+Description:
+		The mem_used_max file is write-only and is used to reset
+		the counter of maximum memory zram have consumed to store
+		compressed data. For resetting the value, you should write
+		"0". Otherwise, you could see -EINVAL.
+		Unit: bytes
+
+What:		/sys/block/zram<id>/mem_limit
+Date:		August 2014
+Contact:	Minchan Kim <minchan@kernel.org>
+Description:
+		The mem_limit file is write-only and specifies the maximum
+		amount of memory ZRAM can use to store the compressed data.
+		The limit could be changed in run time and "0" means disable
+		the limit. No limit is the initial state.  Unit: bytes
+
+What:		/sys/block/zram<id>/compact
+Date:		August 2015
+Contact:	Minchan Kim <minchan@kernel.org>
+Description:
+		The compact file is write-only and trigger compaction for
+		allocator zrm uses. The allocator moves some objects so that
+		it could free fragment space.
+
+What:		/sys/block/zram<id>/io_stat
+Date:		August 2015
+Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Description:
+		The io_stat file is read-only and accumulates device's I/O
+		statistics not accounted by block layer. For example,
+		failed_reads, failed_writes, etc. File format is similar to
+		block layer statistics file format.
+
+What:		/sys/block/zram<id>/mm_stat
+Date:		August 2015
+Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Description:
+		The mm_stat file is read-only and represents device's mm
+		statistics (orig_data_size, compr_data_size, etc.) in a format
+		similar to block layer statistics file format.
+
+What:		/sys/block/zram<id>/debug_stat
+Date:		July 2016
+Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Description:
+		The debug_stat file is read-only and represents various
+		device's debugging info useful for kernel developers. Its
+		format is not documented intentionally and may change
+		anytime without any notice.
+
+What:		/sys/block/zram<id>/backing_dev
+Date:		June 2017
+Contact:	Minchan Kim <minchan@kernel.org>
+Description:
+		The backing_dev file is read-write and set up backing
+		device for zram to write incompressible pages.
+		For using, user should enable CONFIG_ZRAM_WRITEBACK.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-acpi b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-acpi
new file mode 100644
index 0000000..7fa9cbc
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-acpi
@@ -0,0 +1,58 @@
+What:		/sys/bus/acpi/devices/.../path
+Date:		December 2006
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute indicates the full path of ACPI namespace
+		object associated with the device object.  For example,
+		\_SB_.PCI0.
+		This file is not present for device objects representing
+		fixed ACPI hardware features (like power and sleep
+		buttons).
+
+What:		/sys/bus/acpi/devices/.../modalias
+Date:		July 2007
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute indicates the PNP IDs of the device object.
+		That is acpi:HHHHHHHH:[CCCCCCC:].  Where each HHHHHHHH or
+		CCCCCCCC contains device object's PNPID (_HID or _CID).
+
+What:		/sys/bus/acpi/devices/.../hid
+Date:		April 2005
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute indicates the hardware ID (_HID) of the
+		device object.  For example, PNP0103.
+		This file is present for device objects having the _HID
+		control method.
+
+What:		/sys/bus/acpi/devices/.../description
+Date:		October 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute contains the output of the device object's
+		_STR control method, if present.
+
+What:		/sys/bus/acpi/devices/.../adr
+Date:		October 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute contains the output of the device object's
+		_ADR control method, which is present for ACPI device
+		objects representing devices having standard enumeration
+		algorithms, such as PCI.
+
+What:		/sys/bus/acpi/devices/.../uid
+Date:		October 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute contains the output of the device object's
+		_UID control method, if present.
+
+What:		/sys/bus/acpi/devices/.../eject
+Date:		December 2006
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		Writing 1 to this attribute will trigger hot removal of
+		this device object.  This file exists for every device
+		object that has _EJ0 method.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-amba b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-amba
new file mode 100644
index 0000000..e7b5467
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-amba
@@ -0,0 +1,20 @@
+What:		/sys/bus/amba/devices/.../driver_override
+Date:		September 2014
+Contact:	Antonios Motakis <a.motakis@virtualopensystems.com>
+Description:
+		This file allows the driver for a device to be specified which
+		will override standard OF, ACPI, ID table, and name matching.
+		When specified, only a driver with a name matching the value
+		written to driver_override will have an opportunity to bind to
+		the device. The override is specified by writing a string to the
+		driver_override file (echo vfio-amba > driver_override)	and may
+		be cleared with an empty string (echo > driver_override).
+		This returns the device to standard matching rules binding.
+		Writing to driver_override does not automatically unbind the
+		device from its current driver or make any attempt to
+		automatically load the specified driver. If no driver with a
+		matching name is currently loaded in the kernel, the device will
+		not bind to any driver. This also allows devices to opt-out of
+		driver binding using a driver_override name such as "none".
+		Only a single driver may be specified in the override, there is
+		no support for parsing delimiters.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-bcma b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-bcma
new file mode 100644
index 0000000..721b4ae
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-bcma
@@ -0,0 +1,31 @@
+What:		/sys/bus/bcma/devices/.../manuf
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		Each BCMA core has it's manufacturer id. See
+		include/linux/bcma/bcma.h for possible values.
+
+What:		/sys/bus/bcma/devices/.../id
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		There are a few types of BCMA cores, they can be identified by
+		id field.
+
+What:		/sys/bus/bcma/devices/.../rev
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		BCMA cores of the same type can still slightly differ depending
+		on their revision. Use it for detailed programming.
+
+What:		/sys/bus/bcma/devices/.../class
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		Each BCMA core is identified by few fields, including class it
+		belongs to. See include/linux/bcma/bcma.h for possible values.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10
new file mode 100644
index 0000000..b5f5260
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10
@@ -0,0 +1,79 @@
+What:		/sys/bus/coresight/devices/<memory_map>.etb/enable_sink
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Add/remove a sink from a trace path.  There can be multiple
+		source for a single sink.
+		ex: echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/trigger_cntr
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Disables write access to the Trace RAM by stopping the
+		formatter after a defined number of words have been stored
+		following the trigger event. The number of 32-bit words written
+		into the Trace RAM following the trigger event is equal to the
+		value stored in this register+1 (from ARM ETB-TRM).
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/rdp
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Defines the depth, in words, of the trace RAM in powers of
+		2.  The value is read directly from HW register RDP, 0x004.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/sts
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the ETB status register.  The value
+		is read directly from HW register STS, 0x00C.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/rrp
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the ETB RAM Read Pointer register
+		that is used to read entries from the Trace RAM over the APB
+		interface.  The value is read directly from HW register RRP,
+		0x014.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/rwp
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the ETB RAM Write Pointer register
+		that is used to sets the write pointer to write entries from
+		the CoreSight bus into the Trace RAM. The value is read directly
+		from HW register RWP, 0x018.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/trg
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Similar to "trigger_cntr" above except that this value is
+		read directly from HW register TRG, 0x01C.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/ctl
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the ETB Control register. The value
+		is read directly from HW register CTL, 0x020.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffsr
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the ETB Formatter and Flush Status
+		register.  The value is read directly from HW register FFSR,
+		0x300.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffcr
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the ETB Formatter and Flush Control
+		register.  The value is read directly from HW register FFCR,
+		0x304.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
new file mode 100644
index 0000000..924265a
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
@@ -0,0 +1,322 @@
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/enable_source
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Enable/disable tracing on this specific trace entiry.
+		Enabling a source implies the source has been configured
+		properly and a sink has been identidifed for it.  The path
+		of coresight components linking the source to the sink is
+		configured and managed automatically by the coresight framework.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/addr_idx
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	Select which address comparator or pair (of comparators) to
+		work with.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/addr_acctype
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Used in conjunction with @addr_idx.  Specifies
+		characteristics about the address comparator being configure,
+		for example the access type, the kind of instruction to trace,
+		processor contect ID to trigger on, etc.  Individual fields in
+		the access type register may vary on the version of the trace
+		entity.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/addr_range
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Used in conjunction with @addr_idx.  Specifies the range of
+		addresses to trigger on.  Inclusion or exclusion is specificed
+		in the corresponding access type register.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/addr_single
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Used in conjunction with @addr_idx.  Specifies the single
+		address to trigger on, highly influenced by the configuration
+		options of the corresponding access type register.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/addr_start
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Used in conjunction with @addr_idx.  Specifies the single
+		address to start tracing on, highly influenced by the
+		configuration options of the corresponding access type register.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/addr_stop
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Used in conjunction with @addr_idx.  Specifies the single
+		address to stop tracing on, highly influenced by the
+		configuration options of the corresponding access type register.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/cntr_idx
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Specifies the counter to work on.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/cntr_event
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Used in conjunction with cntr_idx, give access to the
+		counter event register.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/cntr_val
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Used in conjunction with cntr_idx, give access to the
+		counter value register.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/cntr_rld_val
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Used in conjunction with cntr_idx, give access to the
+		counter reload value register.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/cntr_rld_event
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Used in conjunction with cntr_idx, give access to the
+		counter reload event register.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/ctxid_idx
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Specifies the index of the context ID register to be
+		selected.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/ctxid_mask
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Mask to apply to all the context ID comparator.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/ctxid_pid
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Used with the ctxid_idx, specify with context ID to trigger
+		on.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/enable_event
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Defines which event triggers a trace.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/etmsr
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Gives access to the ETM status register, which holds
+		programming information and status on certains events.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/fifofull_level
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Number of byte left in the fifo before considering it full.
+		Depending on the tracer's version, can also hold threshold for
+		data suppression.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mode
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Interface with the driver's 'mode' field, controlling
+		various aspect of the trace entity such as time stamping,
+		context ID size and cycle accurate tracing.  Driver specific
+		and bound to change depending on the driver.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_addr_cmp
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(R) Provides the number of address comparators pairs accessible
+		on a trace unit, as specified by bit 3:0 of register ETMCCR.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_cntr
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(R) Provides the number of counters accessible on a trace unit,
+		as specified by bit 15:13 of register ETMCCR.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_ctxid_cmp
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(R) Provides the number of context ID comparator available on a
+		trace unit, as specified by bit 25:24 of register ETMCCR.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/reset
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(W) Cancels all configuration on a trace unit and set it back
+		to its boot configuration.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/seq_12_event
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Defines the event that causes the sequencer to transition
+		from state 1 to state 2.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/seq_13_event
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Defines the event that causes the sequencer to transition
+		from state 1 to state 3.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/seq_21_event
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Defines the event that causes the sequencer to transition
+		from state 2 to state 1.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/seq_23_event
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Defines the event that causes the sequencer to transition
+		from state 2 to state 3.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/seq_31_event
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Defines the event that causes the sequencer to transition
+		from state 3 to state 1.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/seq_32_event
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Defines the event that causes the sequencer to transition
+		from state 3 to state 2.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/curr_seq_state
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(R) Holds the current state of the sequencer.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/sync_freq
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Holds the trace synchronization frequency value - must be
+		programmed with the various implementation behavior in mind.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/timestamp_event
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Defines an event that requests the insertion of a timestamp
+		into the trace stream.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/traceid
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Holds the trace ID that will appear in the trace stream
+		coming from this trace entity.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/trigger_event
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Define the event that controls the trigger.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/cpu
+Date:		October 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RO) Holds the cpu number this tracer is affined to.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmccr
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM Configuration Code register
+		(0x004).  The value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmccer
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM Configuration Code Extension
+		register (0x1e8).  The value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmscr
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM System Configuration
+		register (0x014).  The value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmidr
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM ID register (0x1e4).  The
+		value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmcr
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM Main Control register (0x000).
+		The value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtraceidr
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM Trace ID register (0x200).
+		The value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmteevr
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM Trace Enable Event register
+		(0x020). The value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtsscr
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM Trace Start/Stop Conrol
+		register (0x018). The value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtecr1
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM Enable Conrol #1
+		register (0x024). The value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtecr2
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM Enable Conrol #2
+		register (0x01c). The value is read directly from the HW.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
new file mode 100644
index 0000000..36258bc
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
@@ -0,0 +1,463 @@
+What:		/sys/bus/coresight/devices/<memory_map>.etm/enable_source
+Date:		April 2015
+KernelVersion:  4.01
+Contact:        Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Enable/disable tracing on this specific trace entiry.
+		Enabling a source implies the source has been configured
+		properly and a sink has been identidifed for it.  The path
+		of coresight components linking the source to the sink is
+		configured and managed automatically by the coresight framework.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/cpu
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) The CPU this tracing entity is associated with.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/nr_pe_cmp
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Indicates the number of PE comparator inputs that are
+		available for tracing.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/nr_addr_cmp
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Indicates the number of address comparator pairs that are
+		available for tracing.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/nr_cntr
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Indicates the number of counters that are available for
+		tracing.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/nr_ext_inp
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Indicates how many external inputs are implemented.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/numcidc
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Indicates the number of Context ID comparators that are
+		available for tracing.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/numvmidc
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Indicates the number of VMID comparators that are available
+		for tracing.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/nrseqstate
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Indicates the number of sequencer states that are
+		implemented.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/nr_resource
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Indicates the number of resource selection pairs that are
+		available for tracing.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/nr_ss_cmp
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Indicates the number of single-shot comparator controls that
+		are available for tracing.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/reset
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(W) Cancels all configuration on a trace unit and set it back
+		to its boot configuration.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/mode
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Controls various modes supported by this ETM, for example
+		P0 instruction tracing, branch broadcast, cycle counting and
+		context ID tracing.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/pe
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Controls which PE to trace.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/event
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Controls the tracing of arbitrary events from bank 0 to 3.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/event_instren
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Controls the behavior of the events in bank 0 to 3.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/event_ts
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Controls the insertion of global timestamps in the trace
+		streams.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/syncfreq
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Controls how often trace synchronization requests occur.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/cyc_threshold
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Sets the threshold value for cycle counting.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/bb_ctrl
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Controls which regions in the memory map are enabled to
+		use branch broadcasting.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/event_vinst
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Controls instruction trace filtering.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/s_exlevel_vinst
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) In Secure state, each bit controls whether instruction
+		tracing is enabled for the corresponding exception level.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/ns_exlevel_vinst
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) In non-secure state, each bit controls whether instruction
+		tracing is enabled for the corresponding exception level.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/addr_idx
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Select which address comparator or pair (of comparators) to
+		work with.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/addr_instdatatype
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Controls what type of comparison the trace unit performs.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/addr_single
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Used to setup single address comparator values.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/addr_range
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Used to setup address range comparator values.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/seq_idx
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Select which sequensor.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/seq_state
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Use this to set, or read, the sequencer state.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/seq_event
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Moves the sequencer state to a specific state.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/seq_reset_event
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Moves the sequencer to state 0 when a programmed event
+		occurs.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/cntr_idx
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Select which counter unit to work with.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/cntrldvr
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) This sets or returns the reload count value of the
+		specific counter.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/cntr_val
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) This sets or returns the current count value of the
+                specific counter.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/cntr_ctrl
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Controls the operation of the selected counter.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/res_idx
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Select which resource selection unit to work with.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/res_ctrl
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Controls the selection of the resources in the trace unit.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/ctxid_idx
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Select which context ID comparator to work with.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/ctxid_pid
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Get/Set the context ID comparator value to trigger on.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/ctxid_masks
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Mask for all 8 context ID comparator value
+		registers (if implemented).
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/vmid_idx
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Select which virtual machine ID comparator to work with.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/vmid_val
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Get/Set the virtual machine ID comparator value to
+		trigger on.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/vmid_masks
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Mask for all 8 virtual machine ID comparator value
+		registers (if implemented).
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcoslsr
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Print the content of the OS Lock Status Register (0x304).
+		The value it taken directly  from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpdcr
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Print the content of the Power Down Control Register
+		(0x310).  The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpdsr
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Print the content of the Power Down Status Register
+		(0x314).  The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trclsr
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Print the content of the SW Lock Status Register
+		(0xFB4).  The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcauthstatus
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Print the content of the Authentication Status Register
+		(0xFB8).  The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcdevid
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Print the content of the Device ID Register
+		(0xFC8).  The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcdevtype
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Print the content of the Device Type Register
+		(0xFCC).  The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr0
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Print the content of the Peripheral ID0 Register
+		(0xFE0).  The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr1
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Print the content of the Peripheral ID1 Register
+		(0xFE4).  The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr2
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Print the content of the Peripheral ID2 Register
+		(0xFE8).  The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr3
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Print the content of the Peripheral ID3 Register
+		(0xFEC).  The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcconfig
+Date:		February 2016
+KernelVersion:	4.07
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Print the content of the trace configuration register
+		(0x010) as currently set by SW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trctraceid
+Date:		February 2016
+KernelVersion:	4.07
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Print the content of the trace ID register (0x040).
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr0
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Returns the tracing capabilities of the trace unit (0x1E0).
+		The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr1
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Returns the tracing capabilities of the trace unit (0x1E4).
+		The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr2
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Returns the maximum size of the data value, data address,
+		VMID, context ID and instuction address in the trace unit
+		(0x1E8).  The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr3
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Returns the value associated with various resources
+		available to the trace unit.  See the Trace Macrocell
+		architecture specification for more details (0x1E8).
+		The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr4
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Returns how many resources the trace unit supports (0x1F0).
+		The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr5
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Returns how many resources the trace unit supports (0x1F4).
+		The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr8
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Returns the maximum speculation depth of the instruction
+		trace stream. (0x180).  The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr9
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Returns the number of P0 right-hand keys that the trace unit
+		can use (0x184).  The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr10
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Returns the number of P1 right-hand keys that the trace unit
+		can use (0x188).  The value is taken directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr11
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Returns the number of special P1 right-hand keys that the
+		trace unit can use (0x18C).  The value is taken directly from
+		the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr12
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Returns the number of conditional P1 right-hand keys that
+		the trace unit can use (0x190).  The value is taken directly
+		from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr13
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Returns the number of special conditional P1 right-hand keys
+		that the trace unit can use (0x194).  The value is taken
+		directly from the HW.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-funnel b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-funnel
new file mode 100644
index 0000000..d75acda
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-funnel
@@ -0,0 +1,12 @@
+What:		/sys/bus/coresight/devices/<memory_map>.funnel/funnel_ctrl
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Enables the slave ports and defines the hold time of the
+		slave ports.
+
+What:		/sys/bus/coresight/devices/<memory_map>.funnel/priority
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Defines input port priority order.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-stm b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
new file mode 100644
index 0000000..1dffabe
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
@@ -0,0 +1,53 @@
+What:		/sys/bus/coresight/devices/<memory_map>.stm/enable_source
+Date:		April 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Enable/disable tracing on this specific trace macrocell.
+		Enabling the trace macrocell implies it has been configured
+		properly and a sink has been identified for it.  The path
+		of coresight components linking the source to the sink is
+		configured and managed automatically by the coresight framework.
+
+What:		/sys/bus/coresight/devices/<memory_map>.stm/hwevent_enable
+Date:		April 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Provides access to the HW event enable register, used in
+		conjunction with HW event bank select register.
+
+What:		/sys/bus/coresight/devices/<memory_map>.stm/hwevent_select
+Date:		April 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Gives access to the HW event block select register
+		(STMHEBSR) in order to configure up to 256 channels.  Used in
+		conjunction with "hwevent_enable" register as described above.
+
+What:		/sys/bus/coresight/devices/<memory_map>.stm/port_enable
+Date:		April 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Provides access to the stimulus port enable register
+		(STMSPER).  Used in conjunction with "port_select" described
+		below.
+
+What:		/sys/bus/coresight/devices/<memory_map>.stm/port_select
+Date:		April 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Used to determine which bank of stimulus port bit in
+		register STMSPER (see above) apply to.
+
+What:		/sys/bus/coresight/devices/<memory_map>.stm/status
+Date:		April 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) List various control and status registers.  The specific
+		layout and content is driver specific.
+
+What:		/sys/bus/coresight/devices/<memory_map>.stm/traceid
+Date:		April 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Holds the trace ID that will appear in the trace stream
+		coming from this trace entity.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
new file mode 100644
index 0000000..4fe677e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
@@ -0,0 +1,85 @@
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/trigger_cntr
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Disables write access to the Trace RAM by stopping the
+		formatter after a defined number of words have been stored
+		following the trigger event. Additional interface for this
+		driver are expected to be added as it matures.
+
+What:           /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rsz
+Date:           March 2016
+KernelVersion:  4.7
+Contact:        Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:    (R) Defines the size, in 32-bit words, of the local RAM buffer.
+                The value is read directly from HW register RSZ, 0x004.
+
+What:           /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/sts
+Date:           March 2016
+KernelVersion:  4.7
+Contact:        Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the TMC status register.  The value
+                is read directly from HW register STS, 0x00C.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rrp
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the TMC RAM Read Pointer register
+		that is used to read entries from the Trace RAM over the APB
+		interface.  The value is read directly from HW register RRP,
+		0x014.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rwp
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the TMC RAM Write Pointer register
+		that is used to sets the write pointer to write entries from
+		the CoreSight bus into the Trace RAM. The value is read directly
+		from HW register RWP, 0x018.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/trg
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Similar to "trigger_cntr" above except that this value is
+		read directly from HW register TRG, 0x01C.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ctl
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the TMC Control register. The value
+		is read directly from HW register CTL, 0x020.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ffsr
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the TMC Formatter and Flush Status
+		register.  The value is read directly from HW register FFSR,
+		0x300.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ffcr
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the TMC Formatter and Flush Control
+		register.  The value is read directly from HW register FFCR,
+		0x304.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/mode
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the TMC Mode register, which
+		indicate the mode the device has been configured to enact.  The
+		The value is read directly from the MODE register, 0x028.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/devid
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Indicates the capabilities of the Coresight TMC.
+		The value is read directly from the DEVID register, 0xFC8,
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-css b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-css
new file mode 100644
index 0000000..2979c40
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-css
@@ -0,0 +1,35 @@
+What:		/sys/bus/css/devices/.../type
+Date:		March 2008
+Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
+		linux-s390@vger.kernel.org
+Description:	Contains the subchannel type, as reported by the hardware.
+		This attribute is present for all subchannel types.
+
+What:		/sys/bus/css/devices/.../modalias
+Date:		March 2008
+Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
+		linux-s390@vger.kernel.org
+Description:	Contains the module alias as reported with uevents.
+		It is of the format css:t<type> and present for all
+		subchannel types.
+
+What:		/sys/bus/css/drivers/io_subchannel/.../chpids
+Date:		December 2002
+Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
+		linux-s390@vger.kernel.org
+Description:	Contains the ids of the channel paths used by this
+		subchannel, as reported by the channel subsystem
+		during subchannel recognition.
+		Note: This is an I/O-subchannel specific attribute.
+Users:		s390-tools, HAL
+
+What:		/sys/bus/css/drivers/io_subchannel/.../pimpampom
+Date:		December 2002
+Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
+		linux-s390@vger.kernel.org
+Description:	Contains the PIM/PAM/POM values, as reported by the
+		channel subsystem when last queried by the common I/O
+		layer (this implies that this attribute is not necessarily
+		in sync with the values current in the channel subsystem).
+		Note: This is an I/O-subchannel specific attribute.
+Users:		s390-tools, HAL
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-event_source-devices-events b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
new file mode 100644
index 0000000..505f080
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
@@ -0,0 +1,94 @@
+What:		/sys/devices/cpu/events/
+		/sys/devices/cpu/events/branch-misses
+		/sys/devices/cpu/events/cache-references
+		/sys/devices/cpu/events/cache-misses
+		/sys/devices/cpu/events/stalled-cycles-frontend
+		/sys/devices/cpu/events/branch-instructions
+		/sys/devices/cpu/events/stalled-cycles-backend
+		/sys/devices/cpu/events/instructions
+		/sys/devices/cpu/events/cpu-cycles
+
+Date:		2013/01/08
+
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+
+Description:	Generic performance monitoring events
+
+		A collection of performance monitoring events that may be
+		supported by many/most CPUs. These events can be monitored
+		using the 'perf(1)' tool.
+
+		The contents of each file would look like:
+
+			event=0xNNNN
+
+		where 'N' is a hex digit and the number '0xNNNN' shows the
+		"raw code" for the perf event identified by the file's
+		"basename".
+
+
+What: /sys/bus/event_source/devices/<pmu>/events/<event>
+Date: 2014/02/24
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Per-pmu performance monitoring events specific to the running system
+
+		Each file (except for some of those with a '.' in them, '.unit'
+		and '.scale') in the 'events' directory describes a single
+		performance monitoring event supported by the <pmu>. The name
+		of the file is the name of the event.
+
+		File contents:
+
+			<term>[=<value>][,<term>[=<value>]]...
+
+		Where <term> is one of the terms listed under
+		/sys/bus/event_source/devices/<pmu>/format/ and <value> is
+		a number is base-16 format with a '0x' prefix (lowercase only).
+		If a <term> is specified alone (without an assigned value), it
+		is implied that 0x1 is assigned to that <term>.
+
+		Examples (each of these lines would be in a seperate file):
+
+			event=0x2abc
+			event=0x423,inv,cmask=0x3
+			domain=0x1,offset=0x8,starting_index=0xffff
+			domain=0x1,offset=0x8,core=?
+
+		Each of the assignments indicates a value to be assigned to a
+		particular set of bits (as defined by the format file
+		corresponding to the <term>) in the perf_event structure passed
+		to the perf_open syscall.
+
+		In the case of the last example, a value replacing "?" would
+		need to be provided by the user selecting the particular event.
+		This is referred to as "event parameterization". Event
+		parameters have the format 'param=?'.
+
+What: /sys/bus/event_source/devices/<pmu>/events/<event>.unit
+Date: 2014/02/24
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Perf event units
+
+		A string specifying the English plural numerical unit that <event>
+		(once multiplied by <event>.scale) represents.
+
+		Example:
+
+			Joules
+
+What: /sys/bus/event_source/devices/<pmu>/events/<event>.scale
+Date: 2014/02/24
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Perf event scaling factors
+
+		A string representing a floating point value expressed in
+		scientific notation to be multiplied by the event count
+		recieved from the kernel to match the unit specified in the
+		<event>.unit file.
+
+		Example:
+
+			2.3283064365386962890625e-10
+
+		This is provided to avoid performing floating point arithmetic
+		in the kernel.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-event_source-devices-format b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-event_source-devices-format
new file mode 100644
index 0000000..77f47ff
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-event_source-devices-format
@@ -0,0 +1,20 @@
+Where:		/sys/bus/event_source/devices/<dev>/format
+Date:		January 2012
+Kernel Version: 3.3
+Contact:	Jiri Olsa <jolsa@redhat.com>
+Description:
+		Attribute group to describe the magic bits that go into
+		perf_event_attr::config[012] for a particular pmu.
+		Each attribute of this group defines the 'hardware' bitmask
+		we want to export, so that userspace can deal with sane
+		name/value pairs.
+
+		Userspace must be prepared for the possibility that attributes
+		define overlapping bit ranges. For example:
+			attr1 = 'config:0-23'
+			attr2 = 'config:0-7'
+			attr3 = 'config:12-35'
+
+		Example: 'config1:1,6-10,44'
+		Defines contents of attribute that occupies bits 1,6-10,44 of
+		perf_event_attr::config1.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
new file mode 100644
index 0000000..ec27c6c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
@@ -0,0 +1,45 @@
+What:		/sys/bus/event_source/devices/hv_24x7/interface/catalog
+Date:		February 2014
+Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:
+		Provides access to the binary "24x7 catalog" provided by the
+		hypervisor on POWER7 and 8 systems. This catalog lists events
+		available from the powerpc "hv_24x7" pmu. Its format is
+		documented here:
+		https://raw.githubusercontent.com/jmesmon/catalog-24x7/master/hv-24x7-catalog.h
+
+What:		/sys/bus/event_source/devices/hv_24x7/interface/catalog_length
+Date:		February 2014
+Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:
+		A number equal to the length in bytes of the catalog. This is
+		also extractable from the provided binary "catalog" sysfs entry.
+
+What:		/sys/bus/event_source/devices/hv_24x7/interface/catalog_version
+Date:		February 2014
+Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:
+		Exposes the "version" field of the 24x7 catalog. This is also
+		extractable from the provided binary "catalog" sysfs entry.
+
+What:		/sys/bus/event_source/devices/hv_24x7/event_descs/<event-name>
+Date:		February 2014
+Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:
+		Provides the description of a particular event as provided by
+		the firmware. If firmware does not provide a description, no
+		file will be created.
+
+		Note that the event-name lacks the domain suffix appended for
+		events in the events/ dir.
+
+What:		/sys/bus/event_source/devices/hv_24x7/event_long_descs/<event-name>
+Date:		February 2014
+Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:
+		Provides the "long" description of a particular event as
+		provided by the firmware. If firmware does not provide a
+		description, no file will be created.
+
+		Note that the event-name lacks the domain suffix appended for
+		events in the events/ dir.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci
new file mode 100644
index 0000000..3ca4e55
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci
@@ -0,0 +1,43 @@
+What:		/sys/bus/event_source/devices/hv_gpci/interface/collect_privileged
+Date:		February 2014
+Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:
+		'0' if the hypervisor is configured to forbid access to event
+		counters being accumulated by other guests and to physical
+		domain event counters.
+		'1' if that access is allowed.
+
+What:		/sys/bus/event_source/devices/hv_gpci/interface/ga
+Date:		February 2014
+Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:
+		0 or 1. Indicates whether we have access to "GA" events (listed
+		in arch/powerpc/perf/hv-gpci.h).
+
+What:		/sys/bus/event_source/devices/hv_gpci/interface/expanded
+Date:		February 2014
+Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:
+		0 or 1. Indicates whether we have access to "EXPANDED" events (listed
+		in arch/powerpc/perf/hv-gpci.h).
+
+What:		/sys/bus/event_source/devices/hv_gpci/interface/lab
+Date:		February 2014
+Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:
+		0 or 1. Indicates whether we have access to "LAB" events (listed
+		in arch/powerpc/perf/hv-gpci.h).
+
+What:		/sys/bus/event_source/devices/hv_gpci/interface/version
+Date:		February 2014
+Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:
+		A number indicating the version of the gpci interface that the
+		hypervisor reports supporting.
+
+What:		/sys/bus/event_source/devices/hv_gpci/interface/kernel_version
+Date:		February 2014
+Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:
+		A number indicating the latest version of the gpci interface
+		that the kernel is aware of.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-fcoe b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-fcoe
new file mode 100644
index 0000000..657df13
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-fcoe
@@ -0,0 +1,116 @@
+What:		/sys/bus/fcoe/
+Date:		August 2012
+KernelVersion:	TBD
+Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
+Description:	The FCoE bus. Attributes in this directory are control interfaces.
+Attributes:
+
+	ctlr_create: 'FCoE Controller' instance creation interface. Writing an
+		     <ifname> to this file will allocate and populate sysfs with a
+		     fcoe_ctlr_device (ctlr_X). The user can then configure any
+		     per-port settings and finally write to the fcoe_ctlr_device's
+		     'start' attribute to begin the kernel's discovery and login
+		     process.
+
+	ctlr_destroy: 'FCoE Controller' instance removal interface. Writing a
+		       fcoe_ctlr_device's sysfs name to this file will log the
+		       fcoe_ctlr_device out of the fabric or otherwise connected
+		       FCoE devices. It will also free all kernel memory allocated
+		       for this fcoe_ctlr_device and any structures associated
+		       with it, this includes the scsi_host.
+
+What:		/sys/bus/fcoe/devices/ctlr_X
+Date:		March 2012
+KernelVersion:	TBD
+Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
+Description:	'FCoE Controller' instances on the fcoe bus.
+		The FCoE Controller now has a three stage creation process.
+		1) Write interface name to ctlr_create 2) Configure the FCoE
+		Controller (ctlr_X) 3) Enable the FCoE Controller to begin
+		discovery and login. The FCoE Controller is destroyed by
+		writing it's name, i.e. ctlr_X to the ctlr_delete file.
+
+Attributes:
+
+	fcf_dev_loss_tmo: Device loss timeout period (see below). Changing
+			  this value will change the dev_loss_tmo for all
+			  FCFs discovered by this controller.
+
+	mode:		  Display or change the FCoE Controller's mode. Possible
+			  modes are 'Fabric' and 'VN2VN'. If a FCoE Controller
+			  is started in 'Fabric' mode then FIP FCF discovery is
+			  initiated and ultimately a fabric login is attempted.
+			  If a FCoE Controller is started in 'VN2VN' mode then
+			  FIP VN2VN discovery and login is performed. A FCoE
+			  Controller only supports one mode at a time.
+
+	enabled:	  Whether an FCoE controller is enabled or disabled.
+			  0 if disabled, 1 if enabled. Writing either 0 or 1
+			  to this file will enable or disable the FCoE controller.
+
+	lesb/link_fail:   Link Error Status Block (LESB) link failure count.
+
+	lesb/vlink_fail:  Link Error Status Block (LESB) virtual link
+			  failure count.
+
+	lesb/miss_fka:    Link Error Status Block (LESB) missed FCoE
+			  Initialization Protocol (FIP) Keep-Alives (FKA).
+
+	lesb/symb_err:    Link Error Status Block (LESB) symbolic error count.
+
+	lesb/err_block:   Link Error Status Block (LESB) block error count.
+
+	lesb/fcs_error:   Link Error Status Block (LESB) Fibre Channel
+			  Services error count.
+
+Notes: ctlr_X (global increment starting at 0)
+
+What:		/sys/bus/fcoe/devices/fcf_X
+Date:		March 2012
+KernelVersion:	TBD
+Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
+Description:	'FCoE FCF' instances on the fcoe bus. A FCF is a Fibre Channel
+		Forwarder, which is a FCoE switch that can accept FCoE
+		(Ethernet) packets, unpack them, and forward the embedded
+		Fibre Channel frames into a FC fabric. It can also take
+		outbound FC frames and pack them in Ethernet packets to
+		be sent to their destination on the Ethernet segment.
+Attributes:
+
+	fabric_name: Identifies the fabric that the FCF services.
+
+	switch_name: Identifies the FCF.
+
+	priority:    The switch's priority amongst other FCFs on the same
+		     fabric.
+
+	selected:    1 indicates that the switch has been selected for use;
+		     0 indicates that the switch will not be used.
+
+	fc_map:      The Fibre Channel MAP
+
+	vfid:	     The Virtual Fabric ID
+
+	mac:         The FCF's MAC address
+
+	fka_period:  The FIP Keep-Alive period
+
+	fabric_state: The internal kernel state
+		      "Unknown" - Initialization value
+		      "Disconnected" - No link to the FCF/fabric
+		      "Connected" - Host is connected to the FCF
+		      "Deleted" - FCF is being removed from the system
+
+	dev_loss_tmo: The device loss timeout period for this FCF.
+
+Notes: A device loss infrastructure similar to the FC Transport's
+       is present in fcoe_sysfs. It is nice to have so that a
+       link flapping adapter doesn't continually advance the count
+       used to identify the discovered FCF. FCFs will exist in a
+       "Disconnected" state until either the timer expires and the
+       FCF becomes "Deleted" or the FCF is rediscovered and becomes
+       "Connected."
+
+
+Users: The first user of this interface will be the fcoeadm application,
+       which is commonly packaged in the fcoe-utils package.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-fsi b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-fsi
new file mode 100644
index 0000000..57c8063
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-fsi
@@ -0,0 +1,38 @@
+What:           /sys/bus/platform/devices/fsi-master/rescan
+Date:		May 2017
+KernelVersion:  4.12
+Contact:        cbostic@linux.vnet.ibm.com
+Description:
+                Initiates a FSI master scan for all connected slave devices
+		on its links.
+
+What:           /sys/bus/platform/devices/fsi-master/break
+Date:		May 2017
+KernelVersion:  4.12
+Contact:        cbostic@linux.vnet.ibm.com
+Description:
+		Sends an FSI BREAK command on a master's communication
+		link to any connnected slaves.  A BREAK resets connected
+		device's logic and preps it to receive further commands
+		from the master.
+
+What:           /sys/bus/platform/devices/fsi-master/slave@00:00/term
+Date:		May 2017
+KernelVersion:  4.12
+Contact:        cbostic@linux.vnet.ibm.com
+Description:
+		Sends an FSI terminate command from the master to its
+		connected slave. A terminate resets the slave's state machines
+		that control access to the internally connected engines.  In
+		addition the slave freezes its internal error register for
+		debugging purposes.  This command is also needed to abort any
+		ongoing operation in case of an expired 'Master Time Out'
+		timer.
+
+What:           /sys/bus/platform/devices/fsi-master/slave@00:00/raw
+Date:		May 2017
+KernelVersion:  4.12
+Contact:        cbostic@linux.vnet.ibm.com
+Description:
+		Provides a means of reading/writing a 32 bit value from/to a
+		specified FSI bus address.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-fsl-mc b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-fsl-mc
new file mode 100644
index 0000000..80256b8
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-fsl-mc
@@ -0,0 +1,21 @@
+What:		/sys/bus/fsl-mc/drivers/.../bind
+Date:		December 2016
+Contact:	stuart.yoder@nxp.com
+Description:
+		Writing a device location to this file will cause
+		the driver to attempt to bind to the device found at
+		this location. The format for the location is Object.Id
+		and is the same as found in /sys/bus/fsl-mc/devices/.
+                For example:
+		# echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/bind
+
+What:		/sys/bus/fsl-mc/drivers/.../unbind
+Date:		December 2016
+Contact:	stuart.yoder@nxp.com
+Description:
+		Writing a device location to this file will cause the
+		driver to attempt to unbind from the device found at
+		this location. The format for the location is Object.Id
+		and is the same as found in /sys/bus/fsl-mc/devices/.
+                For example:
+		# echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/unbind
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-hsi b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-hsi
new file mode 100644
index 0000000..1b1b282
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-hsi
@@ -0,0 +1,19 @@
+What:		/sys/bus/hsi
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <carlos.chinea@nokia.com>
+Description:
+		High Speed Synchronous Serial Interface (HSI) is a
+		serial interface mainly used for connecting application
+		engines (APE) with cellular modem engines (CMT) in cellular
+		handsets.
+		The bus will be populated with devices (hsi_clients) representing
+		the protocols available in the system. Bus drivers implement
+		those protocols.
+
+What:		/sys/bus/hsi/devices/.../modalias
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <carlos.chinea@nokia.com>
+Description:	Stores the same MODALIAS value emitted by uevent
+		Format: hsi:<hsi_client device name>
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-i2c-devices-bq32k b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-i2c-devices-bq32k
new file mode 100644
index 0000000..398b258
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-i2c-devices-bq32k
@@ -0,0 +1,7 @@
+What:		/sys/bus/i2c/devices/.../trickle_charge_bypass
+Date:		Jan 2017
+KernelVersion:	4.11
+Contact:	Enric Balletbo i Serra <eballetbo@gmail.com>
+Description:    Attribute for enable/disable the trickle charge bypass
+		The trickle_charge_bypass attribute allows the userspace to
+                enable/disable the Trickle charge FET bypass.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
new file mode 100644
index 0000000..9de269b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
@@ -0,0 +1,21 @@
+What:		/sys/bus/i2c/devices/.../device
+Date:		February 2011
+Contact:	Minkyu Kang <mk7.kang@samsung.com>
+Description:
+		show what device is attached
+		NONE - no device
+		USB - USB device is attached
+		UART - UART is attached
+		CHARGER - Charger is attaced
+		JIG - JIG is attached
+
+What:		/sys/bus/i2c/devices/.../switch
+Date:		February 2011
+Contact:	Minkyu Kang <mk7.kang@samsung.com>
+Description:
+		show or set the state of manual switch
+		VAUDIO - switch to VAUDIO path
+		UART - switch to UART path
+		AUDIO - switch to AUDIO path
+		DHOST - switch to DHOST path
+		AUTO - switch automatically by device
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352
new file mode 100644
index 0000000..feb2e4a
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352
@@ -0,0 +1,21 @@
+Where:		/sys/bus/i2c/devices/.../heading0_input
+Date:		April 2010
+Kernel Version: 2.6.36?
+Contact:	alan.cox@intel.com
+Description:	Reports the current heading from the compass as a floating
+		point value in degrees.
+
+Where:		/sys/bus/i2c/devices/.../power_state
+Date:		April 2010
+Kernel Version: 2.6.36?
+Contact:	alan.cox@intel.com
+Description:	Sets the power state of the device. 0 sets the device into
+		sleep mode, 1 wakes it up.
+
+Where:		/sys/bus/i2c/devices/.../calibration
+Date:		April 2010
+Kernel Version: 2.6.36?
+Contact:	alan.cox@intel.com
+Description:	Sets the calibration on or off (1 = on, 0 = off). See the
+		chip data sheet.
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-i2c-devices-lm3533 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-i2c-devices-lm3533
new file mode 100644
index 0000000..1b62230
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-i2c-devices-lm3533
@@ -0,0 +1,15 @@
+What:		/sys/bus/i2c/devices/.../output_hvled[n]
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the controlling backlight device for high-voltage current
+		sink HVLED[n] (n = 1, 2) (0, 1).
+
+What:		/sys/bus/i2c/devices/.../output_lvled[n]
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the controlling led device for low-voltage current sink
+		LVLED[n] (n = 1..5) (0..3).
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio
new file mode 100644
index 0000000..e21e2ca
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio
@@ -0,0 +1,1646 @@
+What:		/sys/bus/iio/devices/iio:deviceX
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware chip or device accessed by one communication port.
+		Corresponds to a grouping of sensor channels. X is the IIO
+		index of the device.
+
+What:		/sys/bus/iio/devices/triggerX
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		An event driven driver of data capture to an in kernel buffer.
+		May be provided by a device driver that also has an IIO device
+		based on hardware generated events (e.g. data ready) or
+		provided by a separate driver for other hardware (e.g.
+		periodic timer, GPIO or high resolution timer).
+		Contains trigger type specific elements. These do not
+		generalize well and hence are not documented in this file.
+		X is the IIO index of the trigger.
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Directory of attributes relating to the buffer for the device.
+
+What:		/sys/bus/iio/devices/iio:deviceX/name
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Description of the physical chip / device for device X.
+		Typically a part number.
+
+What:		/sys/bus/iio/devices/iio:deviceX/current_timestamp_clock
+KernelVersion:	4.5
+Contact:	linux-iio@vger.kernel.org
+Description:
+		String identifying current posix clock used to timestamp
+		buffered samples and events for device X.
+
+What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
+What:		/sys/bus/iio/devices/triggerX/sampling_frequency
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Some devices have internal clocks.  This parameter sets the
+		resulting sampling frequency.  In many devices this
+		parameter has an effect on input filters etc. rather than
+		simply controlling when the input is sampled.  As this
+		effects data ready triggers, hardware buffers and the sysfs
+		direct access interfaces, it may be found in any of the
+		relevant directories.  If it effects all of the above
+		then it is to be found in the base device directory.
+
+What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
+What:		/sys/.../iio:deviceX/buffer/sampling_frequency_available
+What:		/sys/bus/iio/devices/triggerX/sampling_frequency_available
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		When the internal sampling clock can only take a small
+		discrete set of values, this file lists those available.
+
+What:		/sys/bus/iio/devices/iio:deviceX/oversampling_ratio
+KernelVersion:	2.6.38
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware dependent ADC oversampling. Controls the sampling ratio
+		of the digital filter if available.
+
+What:		/sys/bus/iio/devices/iio:deviceX/oversampling_ratio_available
+KernelVersion:	2.6.38
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware dependent values supported by the oversampling filter.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_raw
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled no bias removal etc.) voltage measurement from
+		channel Y. In special cases where the channel does not
+		correspond to externally available input one of the named
+		versions may be used. The number must always be specified and
+		unique to allow association with event codes. Units after
+		application of scale and offset are millivolts.
+
+		Channels with 'i' and 'q' modifiers always exist in pairs and both
+		channels refer to the same signal. The 'i' channel contains the in-phase
+		component of the signal while the 'q' channel contains the quadrature
+		component.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled) differential voltage measurement equivalent to
+		channel Y - channel Z where these channel numbers apply to the
+		physically equivalent inputs when non differential readings are
+		separately available. In differential only parts, then all that
+		is required is a consistent labeling.  Units after application
+		of scale and offset are millivolts.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw
+KernelVersion:	3.17
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled no bias removal etc.) current measurement from
+		channel Y. In special cases where the channel does not
+		correspond to externally available input one of the named
+		versions may be used. The number must always be specified and
+		unique to allow association with event codes. Units after
+		application of scale and offset are milliamps.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_powerY_raw
+KernelVersion:	4.5
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled no bias removal etc.) power measurement from
+		channel Y. The number must always be specified and
+		unique to allow association with event codes. Units after
+		application of scale and offset are milliwatts.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw
+KernelVersion:	3.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw capacitance measurement from channel Y. Units after
+		application of scale and offset are nanofarads.
+
+What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+KernelVersion:	3.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw differential capacitance measurement equivalent to
+		channel Y - channel Z where these channel numbers apply to the
+		physically equivalent inputs when non differential readings are
+		separately available. In differential only parts, then all that
+		is required is a consistent labeling.  Units after application
+		of scale and offset are nanofarads.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_ambient_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_object_raw
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled no bias removal etc.) temperature measurement.
+		If an axis is specified it generally means that the temperature
+		sensor is associated with one part of a compound device (e.g.
+		a gyroscope axis). The ambient and object modifiers distinguish
+		between ambient (reference) and distant temperature for contact-
+		less measurements. Units after application of scale and offset
+		are milli degrees Celsius.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_input
+KernelVersion:	2.6.38
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Scaled temperature measurement in milli degrees Celsius.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_raw
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Acceleration in direction x, y or z (may be arbitrarily assigned
+		but should match other such assignments on device).
+		Has all of the equivalent parameters as per voltageY. Units
+		after application of scale and offset are m/s^2.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw
+KernelVersion:	4.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Gravity in direction x, y or z (may be arbitrarily assigned
+		but should match other such assignments on device).
+		Units after application of scale and offset are m/s^2.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Angular velocity about axis x, y or z (may be arbitrarily
+		assigned). Has all the equivalent parameters as	per voltageY.
+		Units after application of scale and offset are	radians per
+		second.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_incli_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_incli_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_incli_z_raw
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Inclination raw reading about axis x, y or z (may be
+		arbitrarily assigned). Data converted by application of offset
+		and scale to degrees.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_z_raw
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Magnetic field along axis x, y or z (may be arbitrarily
+		assigned).  Data converted by application of offset
+		then scale to Gauss.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw
+KernelVersion:	2.6.36
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Highest value since some reset condition.  These
+		attributes allow access to this and are otherwise
+		the direct equivalent of the <type>Y[_name]_raw attributes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_xyz_squared_peak_raw
+KernelVersion:	2.6.36
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A computed peak value based on the sum squared magnitude of
+		the underlying value in the specified directions.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_raw
+KernelVersion:	3.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw pressure measurement from channel Y. Units after
+		application of scale and offset are kilopascal.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_input
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_input
+KernelVersion:	3.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Scaled pressure measurement from channel Y, in kilopascal.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw
+KernelVersion:	3.14
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw humidity measurement of air. Units after application of
+		scale and offset are milli percent.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_input
+KernelVersion:	3.14
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Scaled humidity measurement in milli percent.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_X_mean_raw
+KernelVersion:	3.5
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Averaged raw measurement from channel X. The number of values
+		used for averaging is device specific. The converting rules for
+		normal raw values also applies to the averaged raw values.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_current_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_i_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_q_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_current_q_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_current_i_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_offset
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If known for a device, offset to be added to <type>[Y]_raw prior
+		to scaling by <type>[Y]_scale in order to obtain value in the
+		<type> units as specified in <type>[Y]_raw documentation.
+		Not present if the offset is always 0 or unknown. If Y or
+		axis <x|y|z> is not present, then the offset applies to all
+		in channels of <type>.
+		May be writable if a variable offset can be applied on the
+		device. Note that this is different to calibbias which
+		is for devices (or drivers) that apply offsets to compensate
+		for variation between different instances of the part, typically
+		adjusted by using some hardware supported calibration procedure.
+		Calibbias is applied internally, offset is applied in userspace
+		to the _raw output.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_current_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_i_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_q_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_current_i_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_current_q_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_energy_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_distance_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_z_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_countY_scale
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If known for a device, scale to be applied to <type>Y[_name]_raw
+		post addition of <type>[Y][_name]_offset in order to obtain the
+		measured value in <type> units as specified in
+		<type>[Y][_name]_raw documentation.  If shared across all in
+		channels then Y and <x|y|z> are not present and the value is
+		called <type>[Y][_name]_scale. The peak modifier means this
+		value is applied to <type>Y[_name]_peak_raw values.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_calibbias
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware applied calibration offset (assumed to fix production
+		inaccuracies).
+
+What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
+what		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
+what		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware applied calibration scale factor (assumed to fix
+		production inaccuracies).  If shared across all channels,
+		<type>_calibscale is used.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_activity_calibgender
+What:		/sys/bus/iio/devices/iio:deviceX/in_energy_calibgender
+What:		/sys/bus/iio/devices/iio:deviceX/in_distance_calibgender
+What:		/sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender
+KernelVersion:	4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Gender of the user (e.g.: male, female) used by some pedometers
+		to compute the stride length, distance, speed and activity
+		type.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_activity_calibgender_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_energy_calibgender_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_distance_calibgender_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender_available
+KernelVersion:	4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists all available gender values (e.g.: male, female).
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_activity_calibheight
+What:		/sys/bus/iio/devices/iio:deviceX/in_energy_calibheight
+What:		/sys/bus/iio/devices/iio:deviceX/in_distance_calibheight
+What:		/sys/bus/iio/devices/iio:deviceX/in_velocity_calibheight
+KernelVersion:	3.19
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Height of the user (in meters) used by some pedometers
+		to compute the stride length, distance, speed and activity
+		type.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_energy_calibweight
+KernelVersion:	4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Weight of the user (in kg). It is needed by some pedometers
+		to compute the calories burnt by the user.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
+What:		/sys/.../iio:deviceX/in_anglvel_scale_available
+What:		/sys/.../iio:deviceX/in_magn_scale_available
+What:		/sys/.../iio:deviceX/in_illuminance_scale_available
+What:		/sys/.../iio:deviceX/in_intensity_scale_available
+What:		/sys/.../iio:deviceX/in_proximity_scale_available
+What:		/sys/.../iio:deviceX/in_voltageX_scale_available
+What:		/sys/.../iio:deviceX/in_voltage-voltage_scale_available
+What:		/sys/.../iio:deviceX/out_voltageX_scale_available
+What:		/sys/.../iio:deviceX/out_altvoltageX_scale_available
+What:		/sys/.../iio:deviceX/in_capacitance_scale_available
+What:		/sys/.../iio:deviceX/in_pressure_scale_available
+What:		/sys/.../iio:deviceX/in_pressureY_scale_available
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If a discrete set of scale values is available, they
+		are listed in this attribute.
+
+What		/sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_clear_hardwaregain
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware applied gain factor. If shared across all channels,
+		<type>_hardwaregain is used.
+
+What:		/sys/.../in_accel_filter_low_pass_3db_frequency
+What:		/sys/.../in_magn_filter_low_pass_3db_frequency
+What:		/sys/.../in_anglvel_filter_low_pass_3db_frequency
+KernelVersion:	3.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If a known or controllable low pass filter is applied
+		to the underlying data channel, then this parameter
+		gives the 3dB frequency of the filter in Hz.
+
+What:		/sys/.../in_accel_filter_high_pass_3db_frequency
+What:		/sys/.../in_anglvel_filter_high_pass_3db_frequency
+What:		/sys/.../in_magn_filter_high_pass_3db_frequency
+KernelVersion:	4.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If a known or controllable high pass filter is applied
+		to the underlying data channel, then this parameter
+		gives the 3dB frequency of the filter in Hz.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled, no bias etc.) output voltage for
+		channel Y.  The number must always be specified and
+		unique if the output corresponds to a single channel.
+		While DAC like devices typically use out_voltage,
+		a continuous frequency generating device, such as
+		a DDS or PLL should use out_altvoltage.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled, no bias etc.) output voltage for an aggregate of
+		channel Y, channel Z, etc.  This interface is available in cases
+		where a single output sets the value for multiple channels
+		simultaneously.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
+KernelVersion:	2.6.38
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the output powerdown mode.
+		DAC output stage is disconnected from the amplifier and
+		1kohm_to_gnd: connected to ground via an 1kOhm resistor,
+		6kohm_to_gnd: connected to ground via a 6kOhm resistor,
+		20kohm_to_gnd: connected to ground via a 20kOhm resistor,
+		90kohm_to_gnd: connected to ground via a 90kOhm resistor,
+		100kohm_to_gnd: connected to ground via an 100kOhm resistor,
+		125kohm_to_gnd: connected to ground via an 125kOhm resistor,
+		500kohm_to_gnd: connected to ground via a 500kOhm resistor,
+		640kohm_to_gnd: connected to ground via a 640kOhm resistor,
+		three_state: left floating.
+		For a list of available output power down options read
+		outX_powerdown_mode_available. If Y is not present the
+		mode is shared across all outputs.
+
+What:		/sys/.../iio:deviceX/out_voltageY_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_voltage_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_altvoltageY_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
+KernelVersion:	2.6.38
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists all available output power down modes.
+		If Y is not present the mode is shared across all outputs.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
+KernelVersion:	2.6.38
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Writing 1 causes output Y to enter the power down mode specified
+		by the corresponding outY_powerdown_mode. DAC output stage is
+		disconnected from the amplifier. Clearing returns to normal
+		operation. Y may be suppressed if all outputs are controlled
+		together.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Output frequency for channel Y in Hz. The number must always be
+		specified and unique if the output corresponds to a single
+		channel.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Phase in radians of one frequency/clock output Y
+		(out_altvoltageY) relative to another frequency/clock output
+		(out_altvoltageZ) of the device X. The number must always be
+		specified and unique if the output corresponds to a single
+		channel.
+
+What:		/sys/bus/iio/devices/iio:deviceX/events
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Configuration of which hardware generated events are passed up
+		to user-space.
+
+What:		/sys/.../iio:deviceX/events/in_accel_x_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_x_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_z_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_z_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_x_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_x_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_y_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_y_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_z_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_z_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_magn_x_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_magn_x_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_thresh_either_en
+What:		/sys/.../iio:deviceX/events/in_tempY_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_tempY_thresh_falling_en
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Event generated when channel passes a threshold in the specified
+		(_rising|_falling) direction. If the direction is not specified,
+		then either the device will report an event which ever direction
+		a single threshold value is passed in (e.g.
+		<type>[Y][_name]_<raw|input>_thresh_value) or
+		<type>[Y][_name]_<raw|input>_thresh_rising_value and
+		<type>[Y][_name]_<raw|input>_thresh_falling_value may take
+		different values, but the device can only enable both thresholds
+		or neither.
+		Note the driver will assume the last p events requested are
+		to be enabled where p is how many it supports (which may vary
+		depending on the exact set requested. So if you want to be
+		sure you have set what you think you have, check the contents of
+		these attributes after everything is configured. Drivers may
+		have to buffer any parameters so that they are consistent when
+		a given event type is enabled at a future point (and not those for
+		whatever event was previously enabled).
+
+What:		/sys/.../iio:deviceX/events/in_accel_x_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_x_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_z_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_z_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_x_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_x_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_y_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_y_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_z_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_z_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_magn_x_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_magn_x_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_magn_y_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_magn_y_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_magn_z_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_magn_z_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_tempY_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_tempY_roc_falling_en
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Event generated when channel passes a threshold on the rate of
+		change (1st differential) in the specified (_rising|_falling)
+		direction. If the direction is not specified, then either the
+		device will report an event which ever direction a single
+		threshold value is passed in (e.g.
+		<type>[Y][_name]_<raw|input>_roc_value) or
+		<type>[Y][_name]_<raw|input>_roc_rising_value and
+		<type>[Y][_name]_<raw|input>_roc_falling_value may take
+		different values, but the device can only enable both rate of
+		change thresholds or neither.
+		Note the driver will assume the last p events requested are
+		to be enabled where p is however many it supports (which may
+		vary depending on the exact set requested. So if you want to be
+		sure you have set what you think you have, check the contents of
+		these attributes after everything is configured. Drivers may
+		have to buffer any parameters so that they are consistent when
+		a given event type is enabled a future point (and not those for
+		whatever event was previously enabled).
+
+What:		/sys/.../events/in_accel_thresh_rising_value
+What:		/sys/.../events/in_accel_thresh_falling_value
+What:		/sys/.../events/in_accel_x_raw_thresh_rising_value
+What:		/sys/.../events/in_accel_x_raw_thresh_falling_value
+What:		/sys/.../events/in_accel_y_raw_thresh_rising_value
+What:		/sys/.../events/in_accel_y_raw_thresh_falling_value
+What:		/sys/.../events/in_accel_z_raw_thresh_rising_value
+What:		/sys/.../events/in_accel_z_raw_thresh_falling_value
+What:		/sys/.../events/in_anglvel_x_raw_thresh_rising_value
+What:		/sys/.../events/in_anglvel_x_raw_thresh_falling_value
+What:		/sys/.../events/in_anglvel_y_raw_thresh_rising_value
+What:		/sys/.../events/in_anglvel_y_raw_thresh_falling_value
+What:		/sys/.../events/in_anglvel_z_raw_thresh_rising_value
+What:		/sys/.../events/in_anglvel_z_raw_thresh_falling_value
+What:		/sys/.../events/in_magn_x_raw_thresh_rising_value
+What:		/sys/.../events/in_magn_x_raw_thresh_falling_value
+What:		/sys/.../events/in_magn_y_raw_thresh_rising_value
+What:		/sys/.../events/in_magn_y_raw_thresh_falling_value
+What:		/sys/.../events/in_magn_z_raw_thresh_rising_value
+What:		/sys/.../events/in_magn_z_raw_thresh_falling_value
+What:		/sys/.../events/in_rot_from_north_magnetic_raw_thresh_rising_value
+What:		/sys/.../events/in_rot_from_north_magnetic_raw_thresh_falling_value
+What:		/sys/.../events/in_rot_from_north_true_raw_thresh_rising_value
+What:		/sys/.../events/in_rot_from_north_true_raw_thresh_falling_value
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_rising_value
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_falling_value
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_rising_value
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_falling_value
+What:		/sys/.../events/in_voltageY_supply_raw_thresh_rising_value
+What:		/sys/.../events/in_voltageY_supply_raw_thresh_falling_value
+What:		/sys/.../events/in_voltageY_raw_thresh_rising_value
+What:		/sys/.../events/in_voltageY_raw_thresh_falling_value
+What:		/sys/.../events/in_tempY_raw_thresh_rising_value
+What:		/sys/.../events/in_tempY_raw_thresh_falling_value
+What:		/sys/.../events/in_illuminance0_thresh_falling_value
+what:		/sys/.../events/in_illuminance0_thresh_rising_value
+what:		/sys/.../events/in_proximity0_thresh_falling_value
+what:		/sys/.../events/in_proximity0_thresh_rising_value
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the value of threshold that the device is comparing
+		against for the events enabled by
+		<type>Y[_name]_thresh[_rising|falling]_en.
+		If separate attributes exist for the two directions, but
+		direction is not specified for this attribute, then a single
+		threshold value applies to both directions.
+		The raw or input element of the name indicates whether the
+		value is in raw device units or in processed units (as _raw
+		and _input do on sysfs direct channel read attributes).
+
+What:		/sys/.../events/in_accel_scale
+What:		/sys/.../events/in_accel_peak_scale
+What:		/sys/.../events/in_anglvel_scale
+What:		/sys/.../events/in_magn_scale
+What:		/sys/.../events/in_rot_from_north_magnetic_scale
+What:		/sys/.../events/in_rot_from_north_true_scale
+What:		/sys/.../events/in_voltage_scale
+What:		/sys/.../events/in_voltage_supply_scale
+What:		/sys/.../events/in_temp_scale
+What:		/sys/.../events/in_illuminance_scale
+What:		/sys/.../events/in_proximity_scale
+KernelVersion:	3.21
+Contact:	linux-iio@vger.kernel.org
+Description:
+                Specifies the conversion factor from the standard units
+                to device specific units used to set the event trigger
+                threshold.
+
+What:		/sys/.../events/in_accel_x_thresh_rising_hysteresis
+What:		/sys/.../events/in_accel_x_thresh_falling_hysteresis
+What:		/sys/.../events/in_accel_x_thresh_either_hysteresis
+What:		/sys/.../events/in_accel_y_thresh_rising_hysteresis
+What:		/sys/.../events/in_accel_y_thresh_falling_hysteresis
+What:		/sys/.../events/in_accel_y_thresh_either_hysteresis
+What:		/sys/.../events/in_accel_z_thresh_rising_hysteresis
+What:		/sys/.../events/in_accel_z_thresh_falling_hysteresis
+What:		/sys/.../events/in_accel_z_thresh_either_hysteresis
+What:		/sys/.../events/in_anglvel_x_thresh_rising_hysteresis
+What:		/sys/.../events/in_anglvel_x_thresh_falling_hysteresis
+What:		/sys/.../events/in_anglvel_x_thresh_either_hysteresis
+What:		/sys/.../events/in_anglvel_y_thresh_rising_hysteresis
+What:		/sys/.../events/in_anglvel_y_thresh_falling_hysteresis
+What:		/sys/.../events/in_anglvel_y_thresh_either_hysteresis
+What:		/sys/.../events/in_anglvel_z_thresh_rising_hysteresis
+What:		/sys/.../events/in_anglvel_z_thresh_falling_hysteresis
+What:		/sys/.../events/in_anglvel_z_thresh_either_hysteresis
+What:		/sys/.../events/in_magn_x_thresh_rising_hysteresis
+What:		/sys/.../events/in_magn_x_thresh_falling_hysteresis
+What:		/sys/.../events/in_magn_x_thresh_either_hysteresis
+What:		/sys/.../events/in_magn_y_thresh_rising_hysteresis
+What:		/sys/.../events/in_magn_y_thresh_falling_hysteresis
+What:		/sys/.../events/in_magn_y_thresh_either_hysteresis
+What:		/sys/.../events/in_magn_z_thresh_rising_hysteresis
+What:		/sys/.../events/in_magn_z_thresh_falling_hysteresis
+What:		/sys/.../events/in_magn_z_thresh_either_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_thresh_rising_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_thresh_falling_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_thresh_either_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_thresh_rising_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_thresh_falling_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_thresh_either_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_either_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_thresh_either_hysteresis
+What:		/sys/.../events/in_voltageY_thresh_rising_hysteresis
+What:		/sys/.../events/in_voltageY_thresh_falling_hysteresis
+What:		/sys/.../events/in_voltageY_thresh_either_hysteresis
+What:		/sys/.../events/in_tempY_thresh_rising_hysteresis
+What:		/sys/.../events/in_tempY_thresh_falling_hysteresis
+What:		/sys/.../events/in_tempY_thresh_either_hysteresis
+What:		/sys/.../events/in_illuminance0_thresh_falling_hysteresis
+what:		/sys/.../events/in_illuminance0_thresh_rising_hysteresis
+what:		/sys/.../events/in_illuminance0_thresh_either_hysteresis
+what:		/sys/.../events/in_proximity0_thresh_falling_hysteresis
+what:		/sys/.../events/in_proximity0_thresh_rising_hysteresis
+what:		/sys/.../events/in_proximity0_thresh_either_hysteresis
+KernelVersion:	3.13
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the hysteresis of threshold that the device is comparing
+		against for the events enabled by
+		<type>Y[_name]_thresh[_(rising|falling)]_hysteresis.
+		If separate attributes exist for the two directions, but
+		direction is not specified for this attribute, then a single
+		hysteresis value applies to both directions.
+		For falling events the hysteresis is added to the _value attribute for
+		this event to get the upper threshold for when the event goes back to
+		normal, for rising events the hysteresis is subtracted from the _value
+		attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200
+		and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event
+		will get activated once in_voltage0_raw goes above 1200 and will become
+		deactivated again once the value falls below 1150.
+
+What:		/sys/.../events/in_accel_x_raw_roc_rising_value
+What:		/sys/.../events/in_accel_x_raw_roc_falling_value
+What:		/sys/.../events/in_accel_y_raw_roc_rising_value
+What:		/sys/.../events/in_accel_y_raw_roc_falling_value
+What:		/sys/.../events/in_accel_z_raw_roc_rising_value
+What:		/sys/.../events/in_accel_z_raw_roc_falling_value
+What:		/sys/.../events/in_anglvel_x_raw_roc_rising_value
+What:		/sys/.../events/in_anglvel_x_raw_roc_falling_value
+What:		/sys/.../events/in_anglvel_y_raw_roc_rising_value
+What:		/sys/.../events/in_anglvel_y_raw_roc_falling_value
+What:		/sys/.../events/in_anglvel_z_raw_roc_rising_value
+What:		/sys/.../events/in_anglvel_z_raw_roc_falling_value
+What:		/sys/.../events/in_magn_x_raw_roc_rising_value
+What:		/sys/.../events/in_magn_x_raw_roc_falling_value
+What:		/sys/.../events/in_magn_y_raw_roc_rising_value
+What:		/sys/.../events/in_magn_y_raw_roc_falling_value
+What:		/sys/.../events/in_magn_z_raw_roc_rising_value
+What:		/sys/.../events/in_magn_z_raw_roc_falling_value
+What:		/sys/.../events/in_rot_from_north_magnetic_raw_roc_rising_value
+What:		/sys/.../events/in_rot_from_north_magnetic_raw_roc_falling_value
+What:		/sys/.../events/in_rot_from_north_true_raw_roc_rising_value
+What:		/sys/.../events/in_rot_from_north_true_raw_roc_falling_value
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_rising_value
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_falling_value
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_rising_value
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_falling_value
+What:		/sys/.../events/in_voltageY_supply_raw_roc_rising_value
+What:		/sys/.../events/in_voltageY_supply_raw_roc_falling_value
+What:		/sys/.../events/in_voltageY_raw_roc_rising_value
+What:		/sys/.../events/in_voltageY_raw_roc_falling_value
+What:		/sys/.../events/in_tempY_raw_roc_rising_value
+What:		/sys/.../events/in_tempY_raw_roc_falling_value
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the value of rate of change threshold that the
+		device is comparing against for the events enabled by
+		<type>[Y][_name]_roc[_rising|falling]_en.
+		If separate attributes exist for the two directions,
+		but direction is not specified for this attribute,
+		then a single threshold value applies to both directions.
+		The raw or input element of the name indicates whether the
+		value is in raw device units or in processed units (as _raw
+		and _input do on sysfs direct channel read attributes).
+
+What:		/sys/.../events/in_accel_x_thresh_rising_period
+What:		/sys/.../events/in_accel_x_thresh_falling_period
+What:		/sys/.../events/in_accel_x_roc_rising_period
+What:		/sys/.../events/in_accel_x_roc_falling_period
+What:		/sys/.../events/in_accel_y_thresh_rising_period
+What:		/sys/.../events/in_accel_y_thresh_falling_period
+What:		/sys/.../events/in_accel_y_roc_rising_period
+What:		/sys/.../events/in_accel_y_roc_falling_period
+What:		/sys/.../events/in_accel_z_thresh_rising_period
+What:		/sys/.../events/in_accel_z_thresh_falling_period
+What:		/sys/.../events/in_accel_z_roc_rising_period
+What:		/sys/.../events/in_accel_z_roc_falling_period
+What:		/sys/.../events/in_anglvel_x_thresh_rising_period
+What:		/sys/.../events/in_anglvel_x_thresh_falling_period
+What:		/sys/.../events/in_anglvel_x_roc_rising_period
+What:		/sys/.../events/in_anglvel_x_roc_falling_period
+What:		/sys/.../events/in_anglvel_y_thresh_rising_period
+What:		/sys/.../events/in_anglvel_y_thresh_falling_period
+What:		/sys/.../events/in_anglvel_y_roc_rising_period
+What:		/sys/.../events/in_anglvel_y_roc_falling_period
+What:		/sys/.../events/in_anglvel_z_thresh_rising_period
+What:		/sys/.../events/in_anglvel_z_thresh_falling_period
+What:		/sys/.../events/in_anglvel_z_roc_rising_period
+What:		/sys/.../events/in_anglvel_z_roc_falling_period
+What:		/sys/.../events/in_magn_x_thresh_rising_period
+What:		/sys/.../events/in_magn_x_thresh_falling_period
+What:		/sys/.../events/in_magn_x_roc_rising_period
+What:		/sys/.../events/in_magn_x_roc_falling_period
+What:		/sys/.../events/in_magn_y_thresh_rising_period
+What:		/sys/.../events/in_magn_y_thresh_falling_period
+What:		/sys/.../events/in_magn_y_roc_rising_period
+What:		/sys/.../events/in_magn_y_roc_falling_period
+What:		/sys/.../events/in_magn_z_thresh_rising_period
+What:		/sys/.../events/in_magn_z_thresh_falling_period
+What:		/sys/.../events/in_magn_z_roc_rising_period
+What:		/sys/.../events/in_magn_z_roc_falling_period
+What:		/sys/.../events/in_rot_from_north_magnetic_thresh_rising_period
+What:		/sys/.../events/in_rot_from_north_magnetic_thresh_falling_period
+What:		/sys/.../events/in_rot_from_north_magnetic_roc_rising_period
+What:		/sys/.../events/in_rot_from_north_magnetic_roc_falling_period
+What:		/sys/.../events/in_rot_from_north_true_thresh_rising_period
+What:		/sys/.../events/in_rot_from_north_true_thresh_falling_period
+What:		/sys/.../events/in_rot_from_north_true_roc_rising_period
+What:		/sys/.../events/in_rot_from_north_true_roc_falling_period
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_period
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_period
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_rising_period
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_falling_period
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_period
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_period
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_roc_rising_period
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_roc_falling_period
+What:		/sys/.../events/in_voltageY_supply_thresh_rising_period
+What:		/sys/.../events/in_voltageY_supply_thresh_falling_period
+What:		/sys/.../events/in_voltageY_supply_roc_rising_period
+What:		/sys/.../events/in_voltageY_supply_roc_falling_period
+What:		/sys/.../events/in_voltageY_thresh_rising_period
+What:		/sys/.../events/in_voltageY_thresh_falling_period
+What:		/sys/.../events/in_voltageY_roc_rising_period
+What:		/sys/.../events/in_voltageY_roc_falling_period
+What:		/sys/.../events/in_tempY_thresh_rising_period
+What:		/sys/.../events/in_tempY_thresh_falling_period
+What:		/sys/.../events/in_tempY_roc_rising_period
+What:		/sys/.../events/in_tempY_roc_falling_period
+What:		/sys/.../events/in_accel_x&y&z_mag_falling_period
+What:		/sys/.../events/in_intensity0_thresh_period
+What:		/sys/.../events/in_proximity0_thresh_period
+What:		/sys/.../events/in_activity_still_thresh_rising_period
+What:		/sys/.../events/in_activity_still_thresh_falling_period
+What:		/sys/.../events/in_activity_walking_thresh_rising_period
+What:		/sys/.../events/in_activity_walking_thresh_falling_period
+What:		/sys/.../events/in_activity_jogging_thresh_rising_period
+What:		/sys/.../events/in_activity_jogging_thresh_falling_period
+What:		/sys/.../events/in_activity_running_thresh_rising_period
+What:		/sys/.../events/in_activity_running_thresh_falling_period
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Period of time (in seconds) for which the condition must be
+		met before an event is generated. If direction is not
+		specified then this period applies to both directions.
+
+What:		/sys/.../events/in_accel_thresh_rising_low_pass_filter_3db
+What:		/sys/.../events/in_anglvel_thresh_rising_low_pass_filter_3db
+What:		/sys/.../events/in_magn_thresh_rising_low_pass_filter_3db
+KernelVersion:	4.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If a low pass filter can be applied to the event generation
+		this property gives its 3db frequency in Hz.
+		A value of zero disables the filter.
+
+What:		/sys/.../events/in_accel_thresh_rising_high_pass_filter_3db
+What:		/sys/.../events/in_anglvel_thresh_rising_high_pass_filter_3db
+What:		/sys/.../events/in_magn_thresh_rising_high_pass_filter_3db
+KernelVersion:	4.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If a high pass filter can be applied to the event generation
+		this property gives its 3db frequency in Hz.
+		A value of zero disables the filter.
+
+What:		/sys/.../events/in_activity_still_thresh_rising_en
+What:		/sys/.../events/in_activity_still_thresh_falling_en
+What:		/sys/.../events/in_activity_walking_thresh_rising_en
+What:		/sys/.../events/in_activity_walking_thresh_falling_en
+What:		/sys/.../events/in_activity_jogging_thresh_rising_en
+What:		/sys/.../events/in_activity_jogging_thresh_falling_en
+What:		/sys/.../events/in_activity_running_thresh_rising_en
+What:		/sys/.../events/in_activity_running_thresh_falling_en
+KernelVersion:	3.19
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Enables or disables activitity events. Depending on direction
+		an event is generated when sensor ENTERS or LEAVES a given state.
+
+What:		/sys/.../events/in_activity_still_thresh_rising_value
+What:		/sys/.../events/in_activity_still_thresh_falling_value
+What:		/sys/.../events/in_activity_walking_thresh_rising_value
+What:		/sys/.../events/in_activity_walking_thresh_falling_value
+What:		/sys/.../events/in_activity_jogging_thresh_rising_value
+What:		/sys/.../events/in_activity_jogging_thresh_falling_value
+What:		/sys/.../events/in_activity_running_thresh_rising_value
+What:		/sys/.../events/in_activity_running_thresh_falling_value
+KernelVersion:	3.19
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Confidence value (in units as percentage) to be used
+		for deciding when an event should be generated. E.g for
+		running: If the confidence value reported by the sensor
+		is greater than in_activity_running_thresh_rising_value
+		then the sensor ENTERS running state. Conversely, if the
+		confidence value reported by the sensor is lower than
+		in_activity_running_thresh_falling_value then the sensor
+		is LEAVING running state.
+
+What:		/sys/.../iio:deviceX/events/in_accel_mag_en
+What:		/sys/.../iio:deviceX/events/in_accel_mag_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_mag_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_x_mag_en
+What:		/sys/.../iio:deviceX/events/in_accel_x_mag_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_x_mag_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_z_mag_en
+What:		/sys/.../iio:deviceX/events/in_accel_z_mag_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_z_mag_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_x&y&z_mag_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_x&y&z_mag_falling_en
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Similar to in_accel_x_thresh[_rising|_falling]_en, but here the
+		magnitude of the channel is compared to the threshold, not its
+		signed value.
+
+What:		/sys/.../events/in_accel_raw_mag_value
+What:		/sys/.../events/in_accel_x_raw_mag_rising_value
+What:		/sys/.../events/in_accel_y_raw_mag_rising_value
+What:		/sys/.../events/in_accel_z_raw_mag_rising_value
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The value to which the magnitude of the channel is compared. If
+		number or direction is not specified, applies to all channels of
+		this type.
+
+What:		/sys/.../events/in_steps_change_en
+KernelVersion:	4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Event generated when channel passes a threshold on the absolute
+		change in value. E.g. for steps: a step change event is
+		generated each time the user takes N steps, where N is set using
+		in_steps_change_value.
+
+What:		/sys/.../events/in_steps_change_value
+KernelVersion:	4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the value of change threshold that the
+		device is comparing against for the events enabled by
+		<type>[Y][_name]_roc[_rising|falling|]_en. E.g. for steps:
+		if set to 3, a step change event will be generated every 3
+		steps.
+
+What:		/sys/bus/iio/devices/iio:deviceX/trigger/current_trigger
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The name of the trigger source being used, as per string given
+		in /sys/class/iio/triggerY/name.
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/length
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Number of scans contained by the buffer.
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/enable
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Actually start the buffer capture up.  Will start trigger
+		if first device and appropriate.
+
+What:		/sys/bus/iio/devices/iio:deviceX/scan_elements
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Directory containing interfaces for elements that will be
+		captured for a single triggered sample set in the buffer.
+
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_en
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_en
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en
+What:		/sys/.../iio:deviceX/scan_elements/in_proximity_en
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Scan element control for triggered data capture.
+
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_type
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_type
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_type
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_type
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_type
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_type
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_type
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type
+What:		/sys/.../iio:deviceX/scan_elements/in_proximity_type
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Description of the scan element data storage within the buffer
+		and hence the form in which it is read from user-space.
+		Form is [be|le]:[s|u]bits/storagebits[>>shift].
+		be or le specifies big or little endian. s or u specifies if
+		signed (2's complement) or unsigned. bits is the number of bits
+		of data and storagebits is the space (after padding) that it
+		occupies in the buffer. shift if specified, is the shift that
+		needs to be applied prior to masking out unused bits. Some
+		devices put their data in the middle of the transferred elements
+		with additional information on both sides.  Note that some
+		devices will have additional information in the unused bits
+		so to get a clean value, the bits value must be used to mask
+		the buffer output value appropriately.  The storagebits value
+		also specifies the data alignment.  So s48/64>>2 will be a
+		signed 48 bit integer stored in a 64 bit location aligned to
+		a 64 bit boundary. To obtain the clean value, shift right 2
+		and apply a mask to zero the top 16 bits of the result.
+		For other storage combinations this attribute will be extended
+		appropriately.
+
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_type_available
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If the type parameter can take one of a small set of values,
+		this attribute lists them.
+
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_index
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index
+What:		/sys/.../iio:deviceX/scan_elements/in_proximity_index
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A single positive integer specifying the position of this
+		scan element in the buffer. Note these are not dependent on
+		what is enabled and may not be contiguous. Thus for user-space
+		to establish the full layout these must be used in conjunction
+		with all _en attributes to establish which channels are present,
+		and the relevant _type attributes to establish the data storage
+		format.
+
+What:		/sys/.../iio:deviceX/in_activity_still_input
+What:		/sys/.../iio:deviceX/in_activity_walking_input
+What:		/sys/.../iio:deviceX/in_activity_jogging_input
+What:		/sys/.../iio:deviceX/in_activity_running_input
+KernelVersion:	3.19
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to read the confidence for an activity
+		expressed in units as percentage.
+
+What:		/sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw
+KernelVersion:	2.6.38
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to read the amount of quadrature error
+		present in the device at a given time.
+
+What:		/sys/.../iio:deviceX/in_accelX_power_mode
+KernelVersion:	3.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the chip power mode.
+		low_noise: reduce noise level from ADC,
+		low_power: enable low current consumption.
+		For a list of available output power modes read
+		in_accel_power_mode_available.
+
+What:		/sys/.../iio:deviceX/in_energy_input
+What:		/sys/.../iio:deviceX/in_energy_raw
+KernelVersion:	4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to read the energy value reported by the
+		device (e.g.: human activity sensors report energy burnt by the
+		user). Units after application of scale are Joules.
+
+What:		/sys/.../iio:deviceX/in_distance_input
+What:		/sys/.../iio:deviceX/in_distance_raw
+KernelVersion:	4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to read the distance covered by the user
+		since the last reboot while activated. Units after application
+		of scale are meters.
+
+What:		/sys/bus/iio/devices/iio:deviceX/store_eeprom
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Writing '1' stores the current device configuration into
+		on-chip EEPROM. After power-up or chip reset the device will
+		automatically load the saved configuration.
+
+What:		/sys/.../iio:deviceX/in_proximity_raw
+What:		/sys/.../iio:deviceX/in_proximity_input
+What:		/sys/.../iio:deviceX/in_proximityY_raw
+KernelVersion:	3.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Proximity measurement indicating that some
+		object is near the sensor, usually by observing
+		reflectivity of infrared or ultrasound emitted.
+		Often these sensors are unit less and as such conversion
+		to SI units is not possible. Higher proximity measurements
+		indicate closer objects, and vice versa. Units after
+		application of scale and offset are meters.
+
+What:		/sys/.../iio:deviceX/in_illuminance_input
+What:		/sys/.../iio:deviceX/in_illuminance_raw
+What:		/sys/.../iio:deviceX/in_illuminanceY_input
+What:		/sys/.../iio:deviceX/in_illuminanceY_raw
+What:		/sys/.../iio:deviceX/in_illuminanceY_mean_raw
+What:		/sys/.../iio:deviceX/in_illuminance_ir_raw
+What:		/sys/.../iio:deviceX/in_illuminance_clear_raw
+KernelVersion:	3.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Illuminance measurement, units after application of scale
+		and offset are lux.
+
+What:		/sys/.../iio:deviceX/in_intensityY_raw
+What:		/sys/.../iio:deviceX/in_intensityY_ir_raw
+What:		/sys/.../iio:deviceX/in_intensityY_both_raw
+What:		/sys/.../iio:deviceX/in_intensityY_uv_raw
+KernelVersion:	3.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Unit-less light intensity. Modifiers both and ir indicate
+		that measurements contains visible and infrared light
+		components or just infrared light, respectively. Modifier uv indicates
+		that measurements contain ultraviolet light components.
+
+What:		/sys/.../iio:deviceX/in_uvindex_input
+KernelVersion:	4.6
+Contact:	linux-iio@vger.kernel.org
+Description:
+		UV light intensity index measuring the human skin's response to
+		different wavelength of sunlight weighted according to the
+		standardised CIE Erythemal Action Spectrum. UV index values range
+		from 0 (low) to >=11 (extreme).
+
+What:		/sys/.../iio:deviceX/in_intensity_red_integration_time
+What:		/sys/.../iio:deviceX/in_intensity_green_integration_time
+What:		/sys/.../iio:deviceX/in_intensity_blue_integration_time
+What:		/sys/.../iio:deviceX/in_intensity_clear_integration_time
+What:		/sys/.../iio:deviceX/in_illuminance_integration_time
+KernelVersion:	3.12
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to get/set the integration time in
+		seconds.
+
+What:		/sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time
+KernelVersion:	4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Number of seconds in which to compute speed.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_quaternion_raw
+KernelVersion:	3.15
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw value of quaternion components using a format
+		x y z w. Here x, y, and z component represents the axis about
+		which a rotation will occur and w component represents the
+		amount of rotation.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_raw
+KernelVersion:	3.15
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw value of rotation from true/magnetic north measured with
+		or without compensation from tilt sensors.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentX_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentX_i_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentX_q_raw
+KernelVersion:	3.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw current measurement from channel X. Units are in milliamps
+		after application of scale and offset. If no offset or scale is
+		present, output should be considered as processed with the
+		unit in milliamps.
+
+		Channels with 'i' and 'q' modifiers always exist in pairs and both
+		channels refer to the same signal. The 'i' channel contains the in-phase
+		component of the signal while the 'q' channel contains the quadrature
+		component.
+
+What:		/sys/.../iio:deviceX/in_energy_en
+What:		/sys/.../iio:deviceX/in_distance_en
+What:		/sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_en
+What:		/sys/.../iio:deviceX/in_steps_en
+KernelVersion:	3.19
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Activates a device feature that runs in firmware/hardware.
+		E.g. for steps: the pedometer saves power while not used;
+		when activated, it will count the steps taken by the user in
+		firmware and export them through in_steps_input.
+
+What:		/sys/.../iio:deviceX/in_steps_input
+KernelVersion:	3.19
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to read the number of steps taken by the user
+		since the last reboot while activated.
+
+What:		/sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_input
+What:		/sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_raw
+KernelVersion:	3.19
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to read the current speed value of the
+		user (which is the norm or magnitude of the velocity vector).
+		Units after application of scale are m/s.
+
+What:		/sys/.../iio:deviceX/in_steps_debounce_count
+KernelVersion:	4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the number of steps that must occur within
+		in_steps_filter_debounce_time for the pedometer to decide the
+		consumer is making steps.
+
+What:		/sys/.../iio:deviceX/in_steps_debounce_time
+KernelVersion:	4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies number of seconds in which we compute the steps
+		that occur in order to decide if the consumer is making steps.
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/watermark
+KernelVersion:	4.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A single positive integer specifying the maximum number of scan
+		elements to wait for.
+		Poll will block until the watermark is reached.
+		Blocking read will wait until the minimum between the requested
+		read amount or the low water mark is available.
+		Non-blocking read will retrieve the available samples from the
+		buffer even if there are less samples then watermark level. This
+		allows the application to block on poll with a timeout and read
+		the available samples after the timeout expires and thus have a
+		maximum delay guarantee.
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_enabled
+KernelVersion: 4.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A read-only boolean value that indicates if the hardware fifo is
+		currently enabled or disabled. If the device does not have a
+		hardware fifo this entry is not present.
+		The hardware fifo is enabled when the buffer is enabled if the
+		current hardware fifo watermark level is set and other current
+		device settings allows it (e.g. if a trigger is set that samples
+		data differently that the hardware fifo does then hardware fifo
+		will not enabled).
+		If the hardware fifo is enabled and the level of the hardware
+		fifo reaches the hardware fifo watermark level the device will
+		flush its hardware fifo to the device buffer. Doing a non
+		blocking read on the device when no samples are present in the
+		device buffer will also force a flush.
+		When the hardware fifo is enabled there is no need to use a
+		trigger to use buffer mode since the watermark settings
+		guarantees that the hardware fifo is flushed to the device
+		buffer.
+
+What:		/sys/bus/iio/devices/iio:device*/buffer/hwfifo_timeout
+KernelVersion:	4.12
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A read/write property to provide capability to delay reporting of
+		samples till a timeout is reached. This allows host processors to
+		sleep, while the sensor is storing samples in its internal fifo.
+		The maximum timeout in seconds can be specified by setting
+		hwfifo_timeout.The current delay can be read by reading
+		hwfifo_timeout. A value of 0 means that there is no timeout.
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark
+KernelVersion: 4.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read-only entry that contains a single integer specifying the
+		current watermark level for the hardware fifo. If the device
+		does not have a hardware fifo this entry is not present.
+		The watermark level for the hardware fifo is set by the driver
+		based on the value set by the user in buffer/watermark but
+		taking into account hardware limitations (e.g. most hardware
+		buffers are limited to 32-64 samples, some hardware buffers
+		watermarks are fixed or have minimum levels).  A value of 0
+		means that the hardware watermark is unset.
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_min
+KernelVersion: 4.2
+Contact:       linux-iio@vger.kernel.org
+Description:
+		A single positive integer specifying the minimum watermark level
+		for the hardware fifo of this device. If the device does not
+		have a hardware fifo this entry is not present.
+		If the user sets buffer/watermark to a value less than this one,
+		then the hardware watermark will remain unset.
+
+What:	       /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_max
+KernelVersion: 4.2
+Contact:       linux-iio@vger.kernel.org
+Description:
+		A single positive integer specifying the maximum watermark level
+		for the hardware fifo of this device. If the device does not
+		have a hardware fifo this entry is not present.
+		If the user sets buffer/watermark to a value greater than this
+		one, then the hardware watermark will be capped at this value.
+
+What:	       /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_available
+KernelVersion: 4.2
+Contact:       linux-iio@vger.kernel.org
+Description:
+		A list of positive integers specifying the available watermark
+		levels for the hardware fifo. This entry is optional and if it
+		is not present it means that all the values between
+		hwfifo_watermark_min and hwfifo_watermark_max are supported.
+		If the user sets buffer/watermark to a value greater than
+		hwfifo_watermak_min but not equal to any of the values in this
+		list, the driver will chose an appropriate value for the
+		hardware fifo watermark level.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_calibemissivity
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_calibemissivity
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_object_calibemissivity
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibemissivity
+KernelVersion:	4.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The emissivity ratio of the surface in the field of view of the
+		contactless temperature sensor.  Emissivity varies from 0 to 1,
+		with 1 being the emissivity of a black body.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_oversampling_ratio
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_oversampling_ratio
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_z_oversampling_ratio
+KernelVersion:	4.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware applied number of measurements for acquiring one
+		data point. The HW will do <type>[_name]_oversampling_ratio
+		measurements and return the average value as output data. Each
+		value resulted from <type>[_name]_oversampling_ratio measurements
+		is considered as one sample for <type>[_name]_sampling_frequency.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_co2_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_co2_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_voc_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw
+KernelVersion:	4.3
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled no offset etc.) reading of a substance. Units
+		after application of scale and offset are percents.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_resistance_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_resistanceX_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_resistance_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_resistanceX_raw
+KernelVersion:	4.3
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled no offset etc.) resistance reading that can be processed
+		into an ohm value.
+
+What:		/sys/bus/iio/devices/iio:deviceX/heater_enable
+KernelVersion:	4.1.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		'1' (enable) or '0' (disable) specifying the enable
+		of heater function. Same reading values apply
+		This ABI is especially applicable for humidity sensors
+		to heatup the device and get rid of any condensation
+		in some humidity environment
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_ph_raw
+KernelVersion:	4.5
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled no offset etc.) pH reading of a substance as a negative
+		base-10 logarithm of hydrodium ions in a litre of water.
+
+What:           /sys/bus/iio/devices/iio:deviceX/mount_matrix
+What:           /sys/bus/iio/devices/iio:deviceX/in_mount_matrix
+What:           /sys/bus/iio/devices/iio:deviceX/out_mount_matrix
+What:           /sys/bus/iio/devices/iio:deviceX/in_anglvel_mount_matrix
+What:           /sys/bus/iio/devices/iio:deviceX/in_accel_mount_matrix
+KernelVersion:  4.6
+Contact:        linux-iio@vger.kernel.org
+Description:
+		Mounting matrix for IIO sensors. This is a rotation matrix which
+		informs userspace about sensor chip's placement relative to the
+		main hardware it is mounted on.
+		Main hardware placement is defined according to the local
+		reference frame related to the physical quantity the sensor
+		measures.
+		Given that the rotation matrix is defined in a board specific
+		way (platform data and / or device-tree), the main hardware
+		reference frame definition is left to the implementor's choice
+		(see below for a magnetometer example).
+		Applications should apply this rotation matrix to samples so
+		that when main hardware reference frame is aligned onto local
+		reference frame, then sensor chip reference frame is also
+		perfectly aligned with it.
+		Matrix is a 3x3 unitary matrix and typically looks like
+		[0, 1, 0; 1, 0, 0; 0, 0, -1]. Identity matrix
+		[1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and main hardware
+		are perfectly aligned with each other.
+
+		For example, a mounting matrix for a magnetometer sensor informs
+		userspace about sensor chip's ORIENTATION relative to the main
+		hardware.
+		More specifically, main hardware orientation is defined with
+		respect to the LOCAL EARTH GEOMAGNETIC REFERENCE FRAME where :
+		* Y is in the ground plane and positive towards magnetic North ;
+		* X is in the ground plane, perpendicular to the North axis and
+		  positive towards the East ;
+		* Z is perpendicular to the ground plane and positive upwards.
+
+		An implementor might consider that for a hand-held device, a
+		'natural' orientation would be 'front facing camera at the top'.
+		The main hardware reference frame could then be described as :
+		* Y is in the plane of the screen and is positive towards the
+		  top of the screen ;
+		* X is in the plane of the screen, perpendicular to Y axis, and
+		  positive towards the right hand side of the screen ;
+		* Z is perpendicular to the screen plane and positive out of the
+		  screen.
+		Another example for a quadrotor UAV might be :
+		* Y is in the plane of the propellers and positive towards the
+		  front-view camera;
+		* X is in the plane of the propellers, perpendicular to Y axis,
+		  and positive towards the starboard side of the UAV ;
+		* Z is perpendicular to propellers plane and positive upwards.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_electricalconductivity_raw
+KernelVersion:	4.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled no offset etc.) electric conductivity reading that
+		can be processed to siemens per meter.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_countY_raw
+KernelVersion:	4.10
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw counter device counts from channel Y. For quadrature
+		counters, multiplication by an available [Y]_scale results in
+		the counts of a single quadrature signal phase from channel Y.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_raw
+KernelVersion:	4.10
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw counter device index value from channel Y. This attribute
+		provides an absolute positional reference (e.g. a pulse once per
+		revolution) which may be used to home positional systems as
+		required.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available
+KernelVersion:	4.12
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A list of possible counting directions which are:
+		- "up"	: counter device is increasing.
+		- "down": counter device is decreasing.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_direction
+KernelVersion:	4.12
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw counter device counters direction for channel Y.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-accel-bmc150 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-accel-bmc150
new file mode 100644
index 0000000..99847a9
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-accel-bmc150
@@ -0,0 +1,7 @@
+What:		/sys/bus/iio/devices/triggerX/name = "bmc150_accel-any-motion-devX"
+KernelVersion:	3.17
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The BMC150 accelerometer kernel module provides an additional trigger,
+		which sets driver in a mode, where data is pushed to the buffer
+		only when there is any motion.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector
new file mode 100644
index 0000000..2071f9b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector
@@ -0,0 +1,36 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltageY_invert
+Date:		October 2016
+KernelVersion:	4.9
+Contact:	Peter Rosin <peda@axentia.se>
+Description:
+		The DAC is used to find the peak level of an alternating
+		voltage input signal by a binary search using the output
+		of a comparator wired to an interrupt pin. Like so:
+		                           _
+		                          | \
+		     input +------>-------|+ \
+		                          |   \
+		            .-------.     |    }---.
+		            |       |     |   /    |
+		            |    dac|-->--|- /     |
+		            |       |     |_/      |
+		            |       |              |
+		            |       |              |
+		            |    irq|------<-------'
+		            |       |
+		            '-------'
+		The boolean invert attribute (0/1) should be set when the
+		input signal is centered around the maximum value of the
+		dac instead of zero. The envelope detector will search
+		from below in this case and will also invert the result.
+		The edge/level of the interrupt is also switched to its
+		opposite value.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltageY_compare_interval
+Date:		October 2016
+KernelVersion:	4.9
+Contact:	Peter Rosin <peda@axentia.se>
+Description:
+		Number of milliseconds to wait for the comparator in each
+		step of the binary search for the input peak level. Needs
+		to relate to the frequency of the input signal.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435
new file mode 100644
index 0000000..f30b4c4
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435
@@ -0,0 +1,43 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_sensing_mode
+Date:		August 2015
+KernelVersion:	4.2.0
+Contact:	source@cogentembedded.com
+Description:
+		Program sensor type for threshold detector inputs.
+		Could be either "GND-Open" or "Supply-Open" mode. Y is a
+		threshold detector input channel. Channels 0..7, 8..15, 16..23
+		and 24..31 has common sensor types.
+
+What:		/sys/bus/iio/devices/iio:deviceX/events/in_voltageY_thresh_falling_value
+Date:		August 2015
+KernelVersion:	4.2.0
+Contact:	source@cogentembedded.com
+Description:
+		Channel Y low voltage threshold. If sensor input voltage goes lower then
+		this value then the threshold falling event is pushed.
+		Depending on in_voltageY_sensing_mode the low voltage threshold
+		is separately set for "GND-Open" and "Supply-Open" modes.
+		Channels 0..31 have common low threshold values, but could have different
+		sensing_modes.
+		The low voltage threshold range is between 2..21V.
+		Hysteresis between low and high thresholds can not be lower then 2 and
+		can not be odd.
+		If falling threshold results hysteresis to odd value then rising
+		threshold is automatically subtracted by one.
+
+What:		/sys/bus/iio/devices/iio:deviceX/events/in_voltageY_thresh_rising_value
+Date:		August 2015
+KernelVersion:	4.2.0
+Contact:	source@cogentembedded.com
+Description:
+		Channel Y high voltage threshold. If sensor input voltage goes higher then
+		this value then the threshold rising event is pushed.
+		Depending on in_voltageY_sensing_mode the high voltage threshold
+		is separately set for "GND-Open" and "Supply-Open" modes.
+		Channels 0..31 have common high threshold values, but could have different
+		sensing_modes.
+		The high voltage threshold range is between 3..22V.
+		Hysteresis between low and high thresholds can not be lower then 2 and
+		can not be odd.
+		If rising threshold results hysteresis to odd value then falling
+		threshold is automatically appended by one.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
new file mode 100644
index 0000000..6d2d2b0
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
@@ -0,0 +1,17 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_power_shunt_resistor
+Date:		March 2017
+KernelVersion:	4.12
+Contact:	linux-iio@vger.kernel.org
+Description: 	The value of the shunt resistor used to compute power drain on
+                common input voltage pin (RS+). In Ohms.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_current_shunt_resistor
+Date:		March 2017
+KernelVersion:	4.12
+Contact:	linux-iio@vger.kernel.org
+Description: 	The value of the shunt resistor used to compute current flowing
+                between RS+ and RS- voltage sense inputs. In Ohms.
+
+These attributes describe a single physical component, exposed as two distinct
+attributes as it is used to calculate two different values: power load and
+current flowing between RS+ and RS- inputs.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32
new file mode 100644
index 0000000..efe4c85
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32
@@ -0,0 +1,18 @@
+What:		/sys/bus/iio/devices/triggerX/trigger_polarity
+KernelVersion:	4.11
+Contact:	fabrice.gasnier@st.com
+Description:
+		The STM32 ADC can be configured to use external trigger sources
+		(e.g. timers, pwm or exti gpio). Then, it can be tuned to start
+		conversions on external trigger by either:
+		- "rising-edge"
+		- "falling-edge"
+		- "both-edges".
+		Reading returns current trigger polarity.
+		Writing value before enabling conversions sets trigger polarity.
+
+What:		/sys/bus/iio/devices/triggerX/trigger_polarity_available
+KernelVersion:	4.11
+Contact:	fabrice.gasnier@st.com
+Description:
+		List all available trigger_polarity settings.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x
new file mode 100644
index 0000000..c0c1ea9
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x
@@ -0,0 +1,7 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_VOC_short_raw
+Date:		September 2015
+KernelVersion:	4.3
+Contact:	Matt Ranostay <mranostay@gmail.com>
+Description:
+		Get the raw calibration VOC value from the sensor.
+		This value has little application outside of calibration.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
new file mode 100644
index 0000000..7fac2c2
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
@@ -0,0 +1,117 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_count_mode_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_noise_error_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_index_index_polarity_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available
+KernelVersion:	4.10
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Discrete set of available values for the respective counter
+		configuration are listed in this file.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_mode
+KernelVersion:	4.10
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Count mode for channel Y. Four count modes are available:
+		normal, range limit, non-recycle, and modulo-n. The preset value
+		for channel Y is used by the count mode where required.
+
+		Normal:
+			Counting is continuous in either direction.
+
+		Range Limit:
+			An upper or lower limit is set, mimicking limit switches
+			in the mechanical counterpart. The upper limit is set to
+			the preset value, while the lower limit is set to 0. The
+			counter freezes at count = preset when counting up, and
+			at count = 0 when counting down. At either of these
+			limits, the counting is resumed only when the count
+			direction is reversed.
+
+		Non-recycle:
+			Counter is disabled whenever a 24-bit count overflow or
+			underflow takes place. The counter is re-enabled when a
+			new count value is loaded to the counter via a preset
+			operation or write to raw.
+
+		Modulo-N:
+			A count boundary is set between 0 and the preset value.
+			The counter is reset to 0 at count = preset when
+			counting up, while the counter is set to the preset
+			value at count = 0 when counting down; the counter does
+			not freeze at the bundary points, but counts
+			continuously throughout.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_countY_noise_error
+KernelVersion:	4.10
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read-only attribute that indicates whether excessive noise is
+		present at the channel Y count inputs in quadrature clock mode;
+		irrelevant in non-quadrature clock mode.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_countY_preset
+KernelVersion:	4.10
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If the counter device supports preset registers, the preset
+		count for channel Y is provided by this attribute.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode
+KernelVersion:	4.10
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Configure channel Y counter for non-quadrature or quadrature
+		clock mode. Selecting non-quadrature clock mode will disable
+		synchronous load mode. In quadrature clock mode, the channel Y
+		scale attribute selects the encoder phase division (scale of 1
+		selects full-cycle, scale of 0.5 selects half-cycle, scale of
+		0.25 selects quarter-cycle) processed by the channel Y counter.
+
+		Non-quadrature:
+			The filter and decoder circuit are bypassed. Encoder A
+			input serves as the count input and B as the UP/DOWN
+			direction control input, with B = 1 selecting UP Count
+			mode and B = 0 selecting Down Count mode.
+
+		Quadrature:
+			Encoder A and B inputs are digitally filtered and
+			decoded for UP/DN clock.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index
+KernelVersion:	4.10
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Whether to set channel Y counter with channel Y preset value
+		when channel Y index input is active, or continuously count.
+		Valid attribute values are boolean.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity
+KernelVersion:	4.10
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Active level of channel Y index input; irrelevant in
+		non-synchronous load mode.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode
+KernelVersion:	4.10
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Configure channel Y counter for non-synchronous or synchronous
+		load mode. Synchronous load mode cannot be selected in
+		non-quadrature clock mode.
+
+		Non-synchronous:
+			A logic low level is the active level at this index
+			input. The index function (as enabled via
+			set_to_preset_on_index) is performed directly on the
+			active level of the index input.
+
+		Synchronous:
+			Intended for interfacing with encoder Index output in
+			quadrature clock mode. The active level is configured
+			via index_polarity. The index function (as enabled via
+			set_to_preset_on_index) is performed synchronously with
+			the quadrature clock on the active level of the index
+			input.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-cros-ec b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-cros-ec
new file mode 100644
index 0000000..297b972
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-cros-ec
@@ -0,0 +1,18 @@
+What:		/sys/bus/iio/devices/iio:deviceX/calibrate
+Date:		July 2015
+KernelVersion:	4.7
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Writing '1' will perform a FOC (Fast Online Calibration). The
+                corresponding calibration offsets can be read from *_calibbias
+                entries.
+
+What:		/sys/bus/iio/devices/iio:deviceX/location
+Date:		July 2015
+KernelVersion:	4.7
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute returns a string with the physical location where
+                the motion sensor is placed. For example, in a laptop a motion
+                sensor can be located on the base or on the lid. Current valid
+		values are 'base' and 'lid'.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-dac-dpot-dac b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-dac-dpot-dac
new file mode 100644
index 0000000..580e93f
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-dac-dpot-dac
@@ -0,0 +1,8 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw_available
+Date:		October 2016
+KernelVersion:	4.9
+Contact:	Peter Rosin <peda@axentia.se>
+Description:
+		The range of available values represented as the minimum value,
+		the step and the maximum value, all enclosed in square brackets.
+		Example: [0 1 256]
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08
new file mode 100644
index 0000000..0a1ca14
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08
@@ -0,0 +1,22 @@
+What		/sys/bus/iio/devices/iio:deviceX/sensor_sensitivity
+Date:		January 2017
+KernelVersion:	4.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Show or set the gain boost of the amp, from 0-31 range.
+		default 31
+
+What		/sys/bus/iio/devices/iio:deviceX/sensor_max_range
+Date:		January 2017
+KernelVersion:	4.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+                Show or set the maximum range between the sensor and the
+		first object echoed in meters. Default value is 6.020.
+		This setting limits the time the driver is waiting for a
+		echo.
+		Showing the range of available values is represented as the
+		minimum value, the step and the maximum value, all enclosed
+		in square brackets.
+		Example:
+		[0.043 0.043 11.008]
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
new file mode 100644
index 0000000..a91aeab
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
@@ -0,0 +1,29 @@
+What:		/sys/bus/iio/devices/iio:deviceX/pll2_feedback_clk_present
+What:		/sys/bus/iio/devices/iio:deviceX/pll2_reference_clk_present
+What:		/sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_a_present
+What:		/sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_b_present
+What:		/sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_test_present
+What:		/sys/bus/iio/devices/iio:deviceX/vcxo_clk_present
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reading returns either '1' or '0'.
+		'1' means that the clock in question is present.
+		'0' means that the clock is missing.
+
+What:		/sys/bus/iio/devices/iio:deviceX/pllY_locked
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reading returns either '1' or '0'. '1' means that the
+		pllY is locked.
+
+What:		/sys/bus/iio/devices/iio:deviceX/sync_dividers
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Writing '1' triggers the clock distribution synchronization
+		functionality. All dividers are reset and the channels start
+		with their predefined phase offsets (out_altvoltageY_phase).
+		Writing this file has the effect as driving the external
+		/SYNC pin low.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
new file mode 100644
index 0000000..1254457
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
@@ -0,0 +1,21 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_resolution
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Stores channel Y frequency resolution/channel spacing in Hz.
+		The value given directly influences the MODULUS used by
+		the fractional-N PLL. It is assumed that the algorithm
+		that is used to compute the various dividers, is able to
+		generate proper values for multiples of channel spacing.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_refin_frequency
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Sets channel Y REFin frequency in Hz. In some clock chained
+		applications, the reference frequency used by the PLL may
+		change during runtime. This attribute allows the user to
+		adjust the reference frequency accordingly.
+		The value written has no effect until out_altvoltageY_frequency
+		is updated. Consider to use out_altvoltageY_powerdown to power
+		down the PLL and its RFOut buffers during REFin changes.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-gyro-bmg160 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-gyro-bmg160
new file mode 100644
index 0000000..e98209c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-gyro-bmg160
@@ -0,0 +1,7 @@
+What:		/sys/bus/iio/devices/triggerX/name = "bmg160-any-motion-devX"
+KernelVersion:	3.17
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The BMG160 gyro kernel module provides an additional trigger,
+		which sets driver in a mode, where data is pushed to the buffer
+		only when there is any motion.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
new file mode 100644
index 0000000..6adba90
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
@@ -0,0 +1,41 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensityY_raw
+Date:		May 2016
+KernelVersion:
+Contact:	Andrew F. Davis <afd@ti.com>
+Description:
+		Get measured values from the ADC for these stages. Y is the
+		specific stage number corresponding to datasheet stage names
+		as follows:
+		1 -> LED2
+		2 -> ALED2/LED3
+		3 -> LED1
+		4 -> ALED1/LED4
+		Note that channels 5 and 6 represent LED2-ALED2 and LED1-ALED1
+		respectively which simply helper channels containing the
+		calculated difference in the value of stage 1 - 2 and 3 - 4.
+		The values are expressed in 24-bit twos complement.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensityY_offset
+Date:		May 2016
+KernelVersion:
+Contact:	Andrew F. Davis <afd@ti.com>
+Description:
+		Get and set the offset cancellation DAC setting for these
+		stages. The values are expressed in 5-bit sign-magnitude.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensityY_resistance
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensityY_capacitance
+Date:		May 2016
+KernelVersion:
+Contact:	Andrew F. Davis <afd@ti.com>
+Description:
+		Get and set the resistance and the capacitance settings for the
+		Transimpedance Amplifier during the associated stage.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_raw
+Date:		May 2016
+KernelVersion:
+Contact:	Andrew F. Davis <afd@ti.com>
+Description:
+		Get and set the LED current for the specified LED active during
+		this stage. Y is the specific stage number.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x
new file mode 100644
index 0000000..b72bb62
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x
@@ -0,0 +1,9 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_current_heater_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available
+KernelVersion:	4.3
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Controls the heater device within the humidity sensor to get
+		rid of excess condensation.
+
+		Valid control values are 0 = OFF, and 1 = ON.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
new file mode 100644
index 0000000..8916f7e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
@@ -0,0 +1,24 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_allow_async_readout
+Date:		December 2015
+KernelVersion:	4.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		By default (value '0'), the capture thread checks for the Conversion
+		Ready Flag to being set prior to committing a new value to the sample
+		buffer. This synchronizes the in-chip conversion rate with the
+		in-driver readout rate at the cost of an additional register read.
+
+		Writing '1' will remove the polling for the Conversion Ready Flags to
+		save the additional i2c transaction, which will improve the bandwidth
+		available for reading data. However, samples can be occasionally skipped
+		or repeated, depending on the beat between the capture and conversion
+		rates.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_shunt_resistor
+Date:		December 2015
+KernelVersion:	4.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The value of the shunt resistor may be known only at runtime fom an
+		eeprom content read by a client application. This attribute allows to
+		set its value in ohms.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018
new file mode 100644
index 0000000..f0ce0a0
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018
@@ -0,0 +1,19 @@
+What:		/sys/bus/iio/devices/iio:deviceX/proximity_on_chip_ambient_infrared_suppression
+Date:		January 2011
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		From ISL29018 Data Sheet (FN6619.4, Oct 8, 2012) regarding the
+		infrared suppression:
+
+		Scheme 0, makes full n (4, 8, 12, 16) bits (unsigned) proximity
+		detection. The range of Scheme 0 proximity count is from 0 to
+		2^n. Logic 1 of this bit, Scheme 1, makes n-1 (3, 7, 11, 15)
+		bits (2's complementary) proximity_less_ambient detection. The
+		range of Scheme 1 proximity count is from -2^(n-1) to 2^(n-1).
+		The sign bit is extended for resolutions less than 16. While
+		Scheme 0 has wider dynamic range, Scheme 1 proximity detection
+		is less affected by the ambient IR noise variation.
+
+		0 Sensing IR from LED and ambient
+		1 Sensing IR from LED with ambient IR rejection
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
new file mode 100644
index 0000000..22c5ea6
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
@@ -0,0 +1,61 @@
+What:		/sys/.../events/in_illuminance0_thresh_either_en
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Event generated when channel passes one of the four thresholds
+		in each direction (rising|falling) and a zone change occurs.
+		The corresponding light zone can be read from
+		in_illuminance0_zone.
+
+What:		/sys/.../events/in_illuminance0_threshY_hysteresis
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get the hysteresis for thresholds Y, that is,
+		threshY_hysteresis = threshY_raising - threshY_falling
+
+What:		/sys/.../events/illuminance_threshY_falling_value
+What:		/sys/.../events/illuminance_threshY_raising_value
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Specifies the value of threshold that the device is comparing
+		against for the events enabled by
+		in_illuminance0_thresh_either_en (0..255), where Y in 0..3.
+
+		Note that threshY_falling must be less than or equal to
+		threshY_raising.
+
+		These thresholds correspond to the eight zone-boundary
+		registers (boundaryY_{low,high}) and define the five light
+		zones.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_zone
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get the current light zone (0..4) as defined by the
+		in_illuminance0_threshY_{falling,rising} thresholds.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_raw
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get output current for channel Y (0..255), that is,
+		out_currentY_currentZ_raw, where Z is the current zone.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_currentZ_raw
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the output current for channel out_currentY when in zone
+		Z (0..255), where Y in 0..2 and Z in 0..4.
+
+		These values correspond to the ALS-mapper target registers for
+		ALS-mapper Y + 1.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2583 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2583
new file mode 100644
index 0000000..a2e1996
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2583
@@ -0,0 +1,20 @@
+What:		/sys/bus/iio/devices/device[n]/in_illuminance_calibrate
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This property causes an internal calibration of the als gain trim
+		value which is later used in calculating illuminance in lux.
+
+What:		/sys/bus/iio/devices/device[n]/in_illuminance_lux_table
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This property gets/sets the table of coefficients
+		used in calculating illuminance in lux.
+
+What:		/sys/bus/iio/devices/device[n]/in_illuminance_input_target
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This property is the known externally illuminance (in lux).
+		It is used in the process of calibrating the device accuracy.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
new file mode 100644
index 0000000..ad2cc63
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
@@ -0,0 +1,57 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_preset
+KernelVersion:	4.13
+Contact:	fabrice.gasnier@st.com
+Description:
+		Reading returns the current preset value. Writing sets the
+		preset value. Encoder counts continuously from 0 to preset
+		value, depending on direction (up/down).
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
+KernelVersion:	4.13
+Contact:	fabrice.gasnier@st.com
+Description:
+		Reading returns the list possible quadrature modes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
+KernelVersion:	4.13
+Contact:	fabrice.gasnier@st.com
+Description:
+		Configure the device counter quadrature modes:
+		- non-quadrature:
+			Encoder IN1 input servers as the count input (up
+			direction).
+		- quadrature:
+			Encoder IN1 and IN2 inputs are mixed to get direction
+			and count.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_polarity_available
+KernelVersion:	4.13
+Contact:	fabrice.gasnier@st.com
+Description:
+		Reading returns the list possible active edges.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_polarity
+KernelVersion:	4.13
+Contact:	fabrice.gasnier@st.com
+Description:
+		Configure the device encoder/counter active edge:
+		- rising-edge
+		- falling-edge
+		- both-edges
+
+		In non-quadrature mode, device counts up on active edge.
+		In quadrature mode, encoder counting scenarios are as follows:
+		----------------------------------------------------------------
+		| Active  | Level on |      IN1 signal    |     IN2 signal     |
+		| edge    | opposite |------------------------------------------
+		|         | signal   |  Rising  | Falling |  Rising  | Falling |
+		----------------------------------------------------------------
+		| Rising  | High ->  |   Down   |    -    |    Up    |    -    |
+		| edge    | Low  ->  |    Up    |    -    |   Down   |    -    |
+		----------------------------------------------------------------
+		| Falling | High ->  |    -     |    Up   |    -     |   Down  |
+		| edge    | Low  ->  |    -     |   Down  |    -     |    Up   |
+		----------------------------------------------------------------
+		| Both    | High ->  |   Down   |    Up   |    Up    |   Down  |
+		| edges   | Low  ->  |    Up    |   Down  |   Down   |    Up   |
+		----------------------------------------------------------------
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843
new file mode 100644
index 0000000..6275e9f
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843
@@ -0,0 +1,15 @@
+What:           /sys/bus/iio/devices/iio:deviceX/meas_conf
+What:           /sys/bus/iio/devices/iio:deviceX/meas_conf_available
+KernelVersion:  4.5
+Contact:        linux-iio@vger.kernel.org
+Description:
+                Current configuration and available configurations
+		for the bias current.
+		normal		- Normal measurement configurations (default)
+		positivebias	- Positive bias configuration
+		negativebias	- Negative bias configuration
+		disabled	- Only available on HMC5983. Disables magnetic
+				  sensor and enables temperature sensor.
+		Note: The effect of this configuration may vary
+		according to the device. For exact documentation
+		check the device's datasheet.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-meas-spec b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-meas-spec
new file mode 100644
index 0000000..6d47e54
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-meas-spec
@@ -0,0 +1,7 @@
+What:           /sys/bus/iio/devices/iio:deviceX/battery_low
+KernelVersion:  4.1.0
+Contact:        linux-iio@vger.kernel.org
+Description:
+                Reading returns either '1' or '0'. '1' means that the
+                battery level supplied to sensor is below 2.25V.
+                This ABI is available for tsys02d, htu21, ms8607
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-mpu6050 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-mpu6050
new file mode 100644
index 0000000..cb53737
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-mpu6050
@@ -0,0 +1,13 @@
+What:           /sys/bus/iio/devices/iio:deviceX/in_gyro_matrix
+What:           /sys/bus/iio/devices/iio:deviceX/in_accel_matrix
+What:           /sys/bus/iio/devices/iio:deviceX/in_magn_matrix
+KernelVersion:  3.4.0
+Contact:        linux-iio@vger.kernel.org
+Description:
+		This is mounting matrix for motion sensors. Mounting matrix
+		is a 3x3 unitary matrix. A typical mounting matrix would look like
+		[0, 1, 0; 1, 0, 0; 0, 0, -1]. Using this information, it would be
+		easy to tell the relative positions among sensors as well as their
+		positions relative to the board that holds these sensors. Identity matrix
+		[1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and device are perfectly
+		aligned with each other. All axes are exactly the same.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-potentiometer-mcp4531 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-potentiometer-mcp4531
new file mode 100644
index 0000000..2a91fbe
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-potentiometer-mcp4531
@@ -0,0 +1,8 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_resistance_raw_available
+Date:		October 2016
+KernelVersion:	4.9
+Contact:	Peter Rosin <peda@axentia.se>
+Description:
+		The range of available values represented as the minimum value,
+		the step and the maximum value, all enclosed in square brackets.
+		Example: [0 1 256]
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
new file mode 100644
index 0000000..147d4e8
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
@@ -0,0 +1,24 @@
+What		/sys/bus/iio/devices/iio:deviceX/in_proximity_input
+Date:		March 2014
+KernelVersion:	3.15
+Contact:	Matt Ranostay <mranostay@gmail.com>
+Description:
+		Get the current distance in meters of storm (1km steps)
+		1000-40000 = distance in meters
+
+What		/sys/bus/iio/devices/iio:deviceX/sensor_sensitivity
+Date:		March 2014
+KernelVersion:	3.15
+Contact:	Matt Ranostay <mranostay@gmail.com>
+Description:
+		Show or set the gain boost of the amp, from 0-31 range.
+		18 = indoors (default)
+		14 = outdoors
+
+What		/sys/bus/iio/devices/iio:deviceX/noise_level_tripped
+Date:		May 2017
+KernelVersion:	4.13
+Contact:	Matt Ranostay <matt.ranostay@konsulko.com>
+Description:
+		When 1 the noise level is over the trip level and not reporting
+		valid data
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
new file mode 100644
index 0000000..161c147
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
@@ -0,0 +1,155 @@
+What:		/sys/bus/iio/devices/triggerX/master_mode_available
+KernelVersion:	4.11
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the list possible master modes which are:
+		- "reset"     :	The UG bit from the TIMx_EGR register is
+				used as trigger output (TRGO).
+		- "enable"    : The Counter Enable signal CNT_EN is used
+				as trigger output.
+		- "update"    : The update event is selected as trigger output.
+				For instance a master timer can then be used
+				as a prescaler for a slave timer.
+		- "compare_pulse" : The trigger output send a positive pulse
+				    when the CC1IF flag is to be set.
+		- "OC1REF"    : OC1REF signal is used as trigger output.
+		- "OC2REF"    : OC2REF signal is used as trigger output.
+		- "OC3REF"    : OC3REF signal is used as trigger output.
+		- "OC4REF"    : OC4REF signal is used as trigger output.
+		Additional modes (on TRGO2 only):
+		- "OC5REF"    : OC5REF signal is used as trigger output.
+		- "OC6REF"    : OC6REF signal is used as trigger output.
+		- "compare_pulse_OC4REF":
+		  OC4REF rising or falling edges generate pulses.
+		- "compare_pulse_OC6REF":
+		  OC6REF rising or falling edges generate pulses.
+		- "compare_pulse_OC4REF_r_or_OC6REF_r":
+		  OC4REF or OC6REF rising edges generate pulses.
+		- "compare_pulse_OC4REF_r_or_OC6REF_f":
+		  OC4REF rising or OC6REF falling edges generate pulses.
+		- "compare_pulse_OC5REF_r_or_OC6REF_r":
+		  OC5REF or OC6REF rising edges generate pulses.
+		- "compare_pulse_OC5REF_r_or_OC6REF_f":
+		  OC5REF rising or OC6REF falling edges generate pulses.
+
+		+-----------+   +-------------+            +---------+
+		| Prescaler +-> | Counter     |        +-> | Master  | TRGO(2)
+		+-----------+   +--+--------+-+        |-> | Control +-->
+		                   |        |          ||  +---------+
+		                +--v--------+-+ OCxREF ||  +---------+
+		                | Chx compare +----------> | Output  | ChX
+		                +-----------+-+         |  | Control +-->
+		                      .     |           |  +---------+
+		                      .     |           |    .
+		                +-----------v-+ OC6REF  |    .
+		                | Ch6 compare +---------+>
+		                +-------------+
+
+		Example with: "compare_pulse_OC4REF_r_or_OC6REF_r":
+
+		                X
+		              X   X
+		            X .   . X
+		          X   .   .   X
+		        X     .   .     X
+		count X .     .   .     . X
+		        .     .   .     .
+		        .     .   .     .
+		        +---------------+
+		OC4REF  |     .   .     |
+		      +-+     .   .     +-+
+		        .     +---+     .
+		OC6REF  .     |   |     .
+		      +-------+   +-------+
+		        +-+   +-+
+		TRGO2   | |   | |
+		      +-+ +---+ +---------+
+
+What:		/sys/bus/iio/devices/triggerX/master_mode
+KernelVersion:	4.11
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the current master modes.
+		Writing set the master mode
+
+What:		/sys/bus/iio/devices/triggerX/sampling_frequency
+KernelVersion:	4.11
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the current sampling frequency.
+		Writing an value different of 0 set and start sampling.
+		Writing 0 stop sampling.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_preset
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the current preset value.
+		Writing sets the preset value.
+		When counting up the counter starts from 0 and fires an
+		event when reach preset value.
+		When counting down the counter start from preset value
+		and fire event when reach 0.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the list possible quadrature modes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Configure the device counter quadrature modes:
+		channel_A:
+			Encoder A input servers as the count input and B as
+			the UP/DOWN direction control input.
+
+		channel_B:
+			Encoder B input serves as the count input and A as
+			the UP/DOWN direction control input.
+
+		quadrature:
+			Encoder A and B inputs are mixed to get direction
+			and count with a scale of 0.25.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the list possible enable modes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_enable_mode
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Configure the device counter enable modes, in all case
+		counting direction is set by in_count0_count_direction
+		attribute and the counter is clocked by the internal clock.
+		always:
+			Counter is always ON.
+
+		gated:
+			Counting is enabled when connected trigger signal
+			level is high else counting is disabled.
+
+		triggered:
+			Counting is enabled on rising edge of the connected
+			trigger, and remains enabled for the duration of this
+			selected mode.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_trigger_mode_available
+KernelVersion:	4.13
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the list possible trigger modes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_trigger_mode
+KernelVersion:	4.13
+Contact:	benjamin.gaignard@st.com
+Description:
+		Configure the device counter trigger mode
+		counting direction is set by in_count0_count_direction
+		attribute and the counter is clocked by the connected trigger
+		rising edges.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs
new file mode 100644
index 0000000..04ac623
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs
@@ -0,0 +1,42 @@
+What:		/sys/bus/iio/devices/triggerX/trigger_now
+KernelVersion:	2.6.38
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This file is provided by the iio-trig-sysfs stand-alone trigger
+		driver. Writing this file with any value triggers an event
+		driven driver, associated with this trigger, to capture data
+		into an in kernel buffer. This approach can be valuable during
+		automated testing or in situations, where other trigger methods
+		are not applicable. For example no RTC or spare GPIOs.
+		X is the IIO index of the trigger.
+
+What:		/sys/bus/iio/devices/triggerX/name
+KernelVersion:	2.6.39
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The name attribute holds a description string for the current
+		trigger. In order to associate the trigger with an IIO device
+		one should write this name string to
+		/sys/bus/iio/devices/iio:deviceY/trigger/current_trigger.
+
+What:		/sys/bus/iio/devices/iio_sysfs_trigger/add_trigger
+KernelVersion:	2.6.39
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is provided by the iio-trig-sysfs stand-alone
+		driver and it is used to activate the creation of a new trigger.
+		In order to achieve this, one should write a positive integer
+		into the associated file, which will serve as the id of the
+		trigger. If the trigger with the specified id is already present
+		in the system, an invalid argument message will be returned.
+
+What:		/sys/bus/iio/devices/iio_sysfs_trigger/remove_trigger
+KernelVersion:	2.6.39
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to unregister and delete a previously
+		created trigger from the list of available triggers. In order to
+		achieve this, one should write a positive integer into the
+		associated file, representing the id of the trigger that needs
+		to be removed. If the trigger can't be found, an invalid
+		argument message will be returned to the user.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-vf610 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-vf610
new file mode 100644
index 0000000..308a675
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-iio-vf610
@@ -0,0 +1,16 @@
+What:		/sys/bus/iio/devices/iio:deviceX/conversion_mode
+KernelVersion:	4.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the hardware conversion mode used. The three
+		available modes are "normal", "high-speed" and "low-power",
+		where the last is the default mode.
+
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_conversion_mode
+KernelVersion:	4.6
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the hardware conversion mode used within DAC.
+		The two available modes are "high-power" and "low-power",
+		where "low-power" mode is the default mode.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth
new file mode 100644
index 0000000..22d0843
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth
@@ -0,0 +1,49 @@
+What:		/sys/bus/intel_th/devices/<intel_th_id>-gth/masters/*
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Configure output ports for STP masters. Writing -1
+		disables a master; any
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_port
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RO) Output port type:
+		  0: not present,
+		  1: MSU (Memory Storage Unit)
+		  2: CTP (Common Trace Port)
+		  4: PTI (MIPI PTI).
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_drop
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Data retention policy setting: keep (0) or drop (1)
+		incoming data while output port is in reset.
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_null
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) STP NULL packet generation: enabled (1) or disabled (0).
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_flush
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Force flush data from byte packing buffer for the output
+		port.
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_reset
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RO) Output port is in reset (1).
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_smcfreq
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) STP sync packet frequency for the port. Specifies the
+		number of clocks between mainenance packets.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc
new file mode 100644
index 0000000..b940c5d
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc
@@ -0,0 +1,33 @@
+What:		/sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/wrap
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Configure MSC buffer wrapping. 1 == wrapping enabled.
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/mode
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Configure MSC operating mode:
+		  - "single", for contiguous buffer mode (high-order alloc);
+		  - "multi", for multiblock mode;
+		  - "ExI", for DCI handler mode;
+		  - "debug", for debug mode.
+		If operating mode changes, existing buffer is deallocated,
+		provided there are no active users and tracing is not enabled,
+		otherwise the write will fail.
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/nr_pages
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Configure MSC buffer size for "single" or "multi" modes.
+		In single mode, this is a single number of pages, has to be
+		power of 2. In multiblock mode, this is a comma-separated list
+		of numbers of pages for each window to be allocated. Number of
+		windows is not limited.
+		Writing to this file deallocates existing buffer (provided
+		there are no active users and tracing is not enabled) and then
+		allocates a new one.
+
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-intel_th-devices-pti b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-intel_th-devices-pti
new file mode 100644
index 0000000..df0b24f
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-intel_th-devices-pti
@@ -0,0 +1,24 @@
+What:		/sys/bus/intel_th/devices/<intel_th_id>-pti/mode
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Configure PTI output width. Currently supported values
+		are 4, 8, 12, 16.
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-pti/freerunning_clock
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) 0: PTI trace clock acts as a strobe which only toggles
+		when there is trace data to send. 1: PTI trace clock is a
+		free-running clock.
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-pti/clock_divider
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Configure PTI port clock divider:
+		 - 0: Intel TH clock rate,
+		 - 1: 1/2 Intel TH clock rate,
+		 - 2: 1/4 Intel TH clock rate,
+		 - 3: 1/8 Intel TH clock rate.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-intel_th-output-devices b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-intel_th-output-devices
new file mode 100644
index 0000000..4d48a94
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-intel_th-output-devices
@@ -0,0 +1,13 @@
+What:		/sys/bus/intel_th/devices/<intel_th_id>-<device><id>/active
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Writes of 1 or 0 enable or disable trace output to this
+		output device. Reads return current status.
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/port
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RO) Port number, corresponding to this output device on the
+		switch (GTH).
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-mcb b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-mcb
new file mode 100644
index 0000000..77947c5
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-mcb
@@ -0,0 +1,29 @@
+What:		/sys/bus/mcb/devices/mcb:X
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Johannes Thumshirn <jth@kernel.org>
+Description:	Hardware chip or device hosting the MEN chameleon bus
+
+What:		/sys/bus/mcb/devices/mcb:X/revision
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Johannes Thumshirn <jth@kernel.org>
+Description:	The FPGA's revision number
+
+What:		/sys/bus/mcb/devices/mcb:X/minor
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Johannes Thumshirn <jth@kernel.org>
+Description:	The FPGA's minor number
+
+What:		/sys/bus/mcb/devices/mcb:X/model
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Johannes Thumshirn <jth@kernel.org>
+Description:	The FPGA's model number
+
+What:		/sys/bus/mcb/devices/mcb:X/name
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Johannes Thumshirn <jth@kernel.org>
+Description:	The FPGA's name
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-mdio b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-mdio
new file mode 100644
index 0000000..491baaf
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-mdio
@@ -0,0 +1,29 @@
+What:		/sys/bus/mdio_bus/devices/.../phy_id
+Date:		November 2012
+KernelVersion:	3.8
+Contact:	netdev@vger.kernel.org
+Description:
+		This attribute contains the 32-bit PHY Identifier as reported
+		by the device during bus enumeration, encoded in hexadecimal.
+		This ID is used to match the device with the appropriate
+		driver.
+
+What:		/sys/bus/mdio_bus/devices/.../phy_interface
+Date:		February 2014
+KernelVersion:	3.15
+Contact:	netdev@vger.kernel.org
+Description:
+		This attribute contains the PHY interface as configured by the
+		Ethernet driver during bus enumeration, encoded in string.
+		This interface mode is used to configure the Ethernet MAC with the
+		appropriate mode for its data lines to the PHY hardware.
+
+What:		/sys/bus/mdio_bus/devices/.../phy_has_fixups
+Date:		February 2014
+KernelVersion:	3.15
+Contact:	netdev@vger.kernel.org
+Description:
+		This attribute contains the boolean value whether a given PHY
+		device has had any "fixup" workaround running on it, encoded as
+		a boolean. This information is provided to help troubleshooting
+		PHY configurations.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-media b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-media
new file mode 100644
index 0000000..7057e57
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-media
@@ -0,0 +1,6 @@
+What:		/sys/bus/media/devices/.../model
+Date:		January 2011
+Contact:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+		linux-media@vger.kernel.org
+Description:	Contains the device model name in UTF-8. The device version is
+		is not be appended to the model name.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-mei b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-mei
new file mode 100644
index 0000000..3f8701e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-mei
@@ -0,0 +1,28 @@
+What:		/sys/bus/mei/devices/.../modalias
+Date:		March 2013
+KernelVersion:	3.10
+Contact:	Samuel Ortiz <sameo@linux.intel.com>
+		linux-mei@linux.intel.com
+Description:	Stores the same MODALIAS value emitted by uevent
+		Format: mei:<mei device name>:<device uuid>:<protocol version>
+
+What:		/sys/bus/mei/devices/.../name
+Date:		May 2015
+KernelVersion:	4.2
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:	Stores mei client device name
+		Format: string
+
+What:		/sys/bus/mei/devices/.../uuid
+Date:		May 2015
+KernelVersion:	4.2
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:	Stores mei client device uuid
+		Format: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
+
+What:		/sys/bus/mei/devices/.../version
+Date:		Aug 2015
+KernelVersion:	4.3
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:	Stores mei client protocol version
+		Format: %d
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-pci b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-pci
new file mode 100644
index 0000000..44d4b2b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-pci
@@ -0,0 +1,325 @@
+What:		/sys/bus/pci/drivers/.../bind
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device location to this file will cause
+		the driver to attempt to bind to the device found at
+		this location.	This is useful for overriding default
+		bindings.  The format for the location is: DDDD:BB:DD.F.
+		That is Domain:Bus:Device.Function and is the same as
+		found in /sys/bus/pci/devices/.  For example:
+		# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
+		(Note: kernels before 2.6.28 may require echo -n).
+
+What:		/sys/bus/pci/drivers/.../unbind
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device location to this file will cause the
+		driver to attempt to unbind from the device found at
+		this location.	This may be useful when overriding default
+		bindings.  The format for the location is: DDDD:BB:DD.F.
+		That is Domain:Bus:Device.Function and is the same as
+		found in /sys/bus/pci/devices/. For example:
+		# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
+		(Note: kernels before 2.6.28 may require echo -n).
+
+What:		/sys/bus/pci/drivers/.../new_id
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device ID to this file will attempt to
+		dynamically add a new device ID to a PCI device driver.
+		This may allow the driver to support more hardware than
+		was included in the driver's static device ID support
+		table at compile time.  The format for the device ID is:
+		VVVV DDDD SVVV SDDD CCCC MMMM PPPP.  That is Vendor ID,
+		Device ID, Subsystem Vendor ID, Subsystem Device ID,
+		Class, Class Mask, and Private Driver Data.  The Vendor ID
+		and Device ID fields are required, the rest are optional.
+		Upon successfully adding an ID, the driver will probe
+		for the device and attempt to bind to it.  For example:
+		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
+
+What:		/sys/bus/pci/drivers/.../remove_id
+Date:		February 2009
+Contact:	Chris Wright <chrisw@sous-sol.org>
+Description:
+		Writing a device ID to this file will remove an ID
+		that was dynamically added via the new_id sysfs entry.
+		The format for the device ID is:
+		VVVV DDDD SVVV SDDD CCCC MMMM.	That is Vendor ID, Device
+		ID, Subsystem Vendor ID, Subsystem Device ID, Class,
+		and Class Mask.  The Vendor ID and Device ID fields are
+		required, the rest are optional.  After successfully
+		removing an ID, the driver will no longer support the
+		device.  This is useful to ensure auto probing won't
+		match the driver to the device.  For example:
+		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id
+
+What:		/sys/bus/pci/rescan
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of all PCI buses in the system, and
+		re-discover previously removed devices.
+
+What:		/sys/bus/pci/devices/.../msi_bus
+Date:		September 2014
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a zero value to this attribute disallows MSI and
+		MSI-X for any future drivers of the device.  If the device
+		is a bridge, MSI and MSI-X will be disallowed for future
+		drivers of all child devices under the bridge.  Drivers
+		must be reloaded for the new setting to take effect.
+
+What:		/sys/bus/pci/devices/.../msi_irqs/
+Date:		September, 2011
+Contact:	Neil Horman <nhorman@tuxdriver.com>
+Description:
+		The /sys/devices/.../msi_irqs directory contains a variable set
+		of files, with each file being named after a corresponding msi
+		irq vector allocated to that device.
+
+What:		/sys/bus/pci/devices/.../msi_irqs/<N>
+Date:		September 2011
+Contact:	Neil Horman <nhorman@tuxdriver.com>
+Description:
+		This attribute indicates the mode that the irq vector named by
+		the file is in (msi vs. msix)
+
+What:		/sys/bus/pci/devices/.../remove
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		hot-remove the PCI device and any of its children.
+
+What:		/sys/bus/pci/devices/.../pci_bus/.../rescan
+Date:		May 2011
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of the bus and all child buses,
+		and re-discover devices removed earlier from this
+		part of the device tree.
+
+What:		/sys/bus/pci/devices/.../rescan
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of the device's parent bus and all
+		child buses, and re-discover devices removed earlier
+		from this part of the device tree.
+
+What:		/sys/bus/pci/devices/.../reset
+Date:		July 2009
+Contact:	Michael S. Tsirkin <mst@redhat.com>
+Description:
+		Some devices allow an individual function to be reset
+		without affecting other functions in the same device.
+		For devices that have this support, a file named reset
+		will be present in sysfs.  Writing 1 to this file
+		will perform reset.
+
+What:		/sys/bus/pci/devices/.../vpd
+Date:		February 2008
+Contact:	Ben Hutchings <bwh@kernel.org>
+Description:
+		A file named vpd in a device directory will be a
+		binary file containing the Vital Product Data for the
+		device.  It should follow the VPD format defined in
+		PCI Specification 2.1 or 2.2, but users should consider
+		that some devices may have malformatted data.  If the
+		underlying VPD has a writable section then the
+		corresponding section of this file will be writable.
+
+What:		/sys/bus/pci/devices/.../virtfnN
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when hardware supports the SR-IOV
+		capability and the Physical Function driver has enabled it.
+		The symbolic link points to the PCI device sysfs entry of the
+		Virtual Function whose index is N (0...MaxVFs-1).
+
+What:		/sys/bus/pci/devices/.../dep_link
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when hardware supports the SR-IOV
+		capability and the Physical Function driver has enabled it,
+		and this device has vendor specific dependencies with others.
+		The symbolic link points to the PCI device sysfs entry of
+		Physical Function this device depends on.
+
+What:		/sys/bus/pci/devices/.../physfn
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when a device is a Virtual Function.
+		The symbolic link points to the PCI device sysfs entry of the
+		Physical Function this device associates with.
+
+What:		/sys/bus/pci/slots/.../module
+Date:		June 2009
+Contact:	linux-pci@vger.kernel.org
+Description:
+		This symbolic link points to the PCI hotplug controller driver
+		module that manages the hotplug slot.
+
+What:		/sys/bus/pci/devices/.../label
+Date:		July 2010
+Contact:	Narendra K <narendra_k@dell.com>, linux-bugs@dell.com
+Description:
+		Reading this attribute will provide the firmware
+		given name (SMBIOS type 41 string or ACPI _DSM string) of
+		the PCI device.	The attribute will be created only
+		if the firmware	has given a name to the PCI device.
+		ACPI _DSM string name will be given priority if the
+		system firmware provides SMBIOS type 41 string also.
+Users:
+		Userspace applications interested in knowing the
+		firmware assigned name of the PCI device.
+
+What:		/sys/bus/pci/devices/.../index
+Date:		July 2010
+Contact:	Narendra K <narendra_k@dell.com>, linux-bugs@dell.com
+Description:
+		Reading this attribute will provide the firmware
+		given instance (SMBIOS type 41 device type instance) of the
+		PCI device. The attribute will be created only if the firmware
+		has given an instance number to the PCI device.
+Users:
+		Userspace applications interested in knowing the
+		firmware assigned device type instance of the PCI
+		device that can help in understanding the firmware
+		intended order of the PCI device.
+
+What:		/sys/bus/pci/devices/.../acpi_index
+Date:		July 2010
+Contact:	Narendra K <narendra_k@dell.com>, linux-bugs@dell.com
+Description:
+		Reading this attribute will provide the firmware
+		given instance (ACPI _DSM instance number) of the PCI device.
+		The attribute will be created only if the firmware has given
+		an instance number to the PCI device. ACPI _DSM instance number
+		will be given priority if the system firmware provides SMBIOS
+		type 41 device type instance also.
+Users:
+		Userspace applications interested in knowing the
+		firmware assigned instance number of the PCI
+		device that can help in understanding the firmware
+		intended order of the PCI device.
+
+What:		/sys/bus/pci/devices/.../d3cold_allowed
+Date:		July 2012
+Contact:	Huang Ying <ying.huang@intel.com>
+Description:
+		d3cold_allowed is bit to control whether the corresponding PCI
+		device can be put into D3Cold state.  If it is cleared, the
+		device will never be put into D3Cold state.  If it is set, the
+		device may be put into D3Cold state if other requirements are
+		satisfied too.  Reading this attribute will show the current
+		value of d3cold_allowed bit.  Writing this attribute will set
+		the value of d3cold_allowed bit.
+
+What:		/sys/bus/pci/devices/.../sriov_totalvfs
+Date:		November 2012
+Contact:	Donald Dutile <ddutile@redhat.com>
+Description:
+		This file appears when a physical PCIe device supports SR-IOV.
+		Userspace applications can read this file to determine the
+		maximum number of Virtual Functions (VFs) a PCIe physical
+		function (PF) can support. Typically, this is the value reported
+		in the PF's SR-IOV extended capability structure's TotalVFs
+		element.  Drivers have the ability at probe time to reduce the
+		value read from this file via the pci_sriov_set_totalvfs()
+		function.
+
+What:		/sys/bus/pci/devices/.../sriov_numvfs
+Date:		November 2012
+Contact:	Donald Dutile <ddutile@redhat.com>
+Description:
+		This file appears when a physical PCIe device supports SR-IOV.
+		Userspace applications can read and write to this file to
+		determine and control the enablement or disablement of Virtual
+		Functions (VFs) on the physical function (PF). A read of this
+		file will return the number of VFs that are enabled on this PF.
+		A number written to this file will enable the specified
+		number of VFs. A userspace application would typically read the
+		file and check that the value is zero, and then write the number
+		of VFs that should be enabled on the PF; the value written
+		should be less than or equal to the value in the sriov_totalvfs
+		file. A userspace application wanting to disable the VFs would
+		write a zero to this file. The core ensures that valid values
+		are written to this file, and returns errors when values are not
+		valid.  For example, writing a 2 to this file when sriov_numvfs
+		is not 0 and not 2 already will return an error. Writing a 10
+		when the value of sriov_totalvfs is 8 will return an error.
+
+What:		/sys/bus/pci/devices/.../driver_override
+Date:		April 2014
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		This file allows the driver for a device to be specified which
+		will override standard static and dynamic ID matching.  When
+		specified, only a driver with a name matching the value written
+		to driver_override will have an opportunity to bind to the
+		device.  The override is specified by writing a string to the
+		driver_override file (echo pci-stub > driver_override) and
+		may be cleared with an empty string (echo > driver_override).
+		This returns the device to standard matching rules binding.
+		Writing to driver_override does not automatically unbind the
+		device from its current driver or make any attempt to
+		automatically load the specified driver.  If no driver with a
+		matching name is currently loaded in the kernel, the device
+		will not bind to any driver.  This also allows devices to
+		opt-out of driver binding using a driver_override name such as
+		"none".  Only a single driver may be specified in the override,
+		there is no support for parsing delimiters.
+
+What:		/sys/bus/pci/devices/.../numa_node
+Date:		Oct 2014
+Contact:	Prarit Bhargava <prarit@redhat.com>
+Description:
+		This file contains the NUMA node to which the PCI device is
+		attached, or -1 if the node is unknown.  The initial value
+		comes from an ACPI _PXM method or a similar firmware
+		source.  If that is missing or incorrect, this file can be
+		written to override the node.  In that case, please report
+		a firmware bug to the system vendor.  Writing to this file
+		taints the kernel with TAINT_FIRMWARE_WORKAROUND, which
+		reduces the supportability of your system.
+
+What:		/sys/bus/pci/devices/.../revision
+Date:		November 2016
+Contact:	Emil Velikov <emil.l.velikov@gmail.com>
+Description:
+		This file contains the revision field of the PCI device.
+		The value comes from device config space. The file is read only.
+
+What:		/sys/bus/pci/devices/.../sriov_drivers_autoprobe
+Date:		April 2017
+Contact:	Bodong Wang<bodong@mellanox.com>
+Description:
+		This file is associated with the PF of a device that
+		supports SR-IOV.  It determines whether newly-enabled VFs
+		are immediately bound to a driver.  It initially contains
+		1, which means the kernel automatically binds VFs to a
+		compatible driver immediately after they are enabled.  If
+		an application writes 0 to the file before enabling VFs,
+		the kernel will not bind VFs to a driver.
+
+		A typical use case is to write 0 to this file, then enable
+		VFs, then assign the newly-created VFs to virtual machines.
+		Note that changing this file does not affect already-
+		enabled VFs.  In this scenario, the user must first disable
+		the VFs, write 0 to sriov_drivers_autoprobe, then re-enable
+		the VFs.
+
+		This is similar to /sys/bus/pci/drivers_autoprobe, but
+		affects only the VFs associated with a specific PF.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
new file mode 100644
index 0000000..53d99ed
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
@@ -0,0 +1,80 @@
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/model
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 0 model for logical drive
+		Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/rev
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 0 revision for logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/unique_id
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 83 serial number for logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/vendor
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 0 vendor for logical drive
+		Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	A symbolic link to /sys/block/cciss!cXdY
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/rescan
+Date:		August 2009
+Kernel Version:	2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Kicks of a rescan of the controller to discover logical
+		drive topology changes.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/lunid
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the 8-byte LUN ID used to address logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/raid_level
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the RAID level of logical drive Y of
+		controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/usage_count
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the usage count (number of opens) of logical drive Y
+		of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/resettable
+Date:		February 2011
+Kernel Version:	2.6.38
+Contact:	iss_storagedev@hp.com
+Description:	Value of 1 indicates the controller can honor the reset_devices
+		kernel parameter.  Value of 0 indicates reset_devices cannot be
+		honored.  This is to allow, for example, kexec tools to be able
+		to warn the user if they designate an unresettable device as
+		a dump device, as kdump requires resetting the device in order
+		to work reliably.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/transport_mode
+Date:		July 2011
+Kernel Version:	3.0
+Contact:	iss_storagedev@hp.com
+Description:	Value of "simple" indicates that the controller has been placed
+		in "simple mode". Value of "performant" indicates that the
+		controller has been placed in "performant mode".
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd
new file mode 100644
index 0000000..60c60fa
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd
@@ -0,0 +1,46 @@
+What:		/sys/bus/pci/drivers/ehci_hcd/.../companion
+		/sys/bus/usb/devices/usbN/../companion
+Date:		January 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		PCI-based EHCI USB controllers (i.e., high-speed USB-2.0
+		controllers) are often implemented along with a set of
+		"companion" full/low-speed USB-1.1 controllers.  When a
+		high-speed device is plugged in, the connection is routed
+		to the EHCI controller; when a full- or low-speed device
+		is plugged in, the connection is routed to the companion
+		controller.
+
+		Sometimes you want to force a high-speed device to connect
+		at full speed, which can be accomplished by forcing the
+		connection to be routed to the companion controller.
+		That's what this file does.  Writing a port number to the
+		file causes connections on that port to be routed to the
+		companion controller, and writing the negative of a port
+		number returns the port to normal operation.
+
+		For example: To force the high-speed device attached to
+		port 4 on bus 2 to run at full speed:
+
+			echo 4 >/sys/bus/usb/devices/usb2/../companion
+
+		To return the port to high-speed operation:
+
+			echo -4 >/sys/bus/usb/devices/usb2/../companion
+
+		Reading the file gives the list of ports currently forced
+		to the companion controller.
+
+		Note: Some EHCI controllers do not have companions; they
+		may contain an internal "transaction translator" or they
+		may be attached directly to a "rate-matching hub".  This
+		mechanism will not work with such controllers.  Also, it
+		cannot be used to force a port on a high-speed hub to
+		connect at full speed.
+
+		Note: When this file was first added, it appeared in a
+		different sysfs directory.  The location given above is
+		correct for 2.6.35 (and probably several earlier kernel
+		versions as well).
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-pci-drivers-janz-cmodio b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-pci-drivers-janz-cmodio
new file mode 100644
index 0000000..4d08f28
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-pci-drivers-janz-cmodio
@@ -0,0 +1,8 @@
+What:		/sys/bus/pci/drivers/janz-cmodio/.../modulbus_number
+Date:		May 2010
+KernelVersion:	2.6.35
+Contact:	Ira W. Snyder <ira.snyder@gmail.com>
+Description:
+		Value representing the HEX switch S2 of the janz carrier board CMOD-IO or CAN-PCI2
+
+		Read-only: value of the configuration switch (0..15)
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-platform b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-platform
new file mode 100644
index 0000000..5172a61
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-platform
@@ -0,0 +1,20 @@
+What:		/sys/bus/platform/devices/.../driver_override
+Date:		April 2014
+Contact:	Kim Phillips <kim.phillips@freescale.com>
+Description:
+		This file allows the driver for a device to be specified which
+		will override standard OF, ACPI, ID table, and name matching.
+		When specified, only a driver with a name matching the value
+		written to driver_override will have an opportunity to bind
+		to the device.  The override is specified by writing a string
+		to the driver_override file (echo vfio-platform > \
+		driver_override) and may be cleared with an empty string
+		(echo > driver_override).  This returns the device to standard
+		matching rules binding.  Writing to driver_override does not
+		automatically unbind the device from its current driver or make
+		any attempt to automatically load the specified driver.  If no
+		driver with a matching name is currently loaded in the kernel,
+		the device will not bind to any driver.  This also allows
+		devices to opt-out of driver binding using a driver_override
+		name such as "none".  Only a single driver may be specified in
+		the override, there is no support for parsing delimiters.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-rbd b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-rbd
new file mode 100644
index 0000000..f208ac5
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-rbd
@@ -0,0 +1,121 @@
+What:		/sys/bus/rbd/
+Date:		November 2010
+Contact:	Yehuda Sadeh <yehuda@newdream.net>,
+		Sage Weil <sage@newdream.net>
+Description:
+
+Being used for adding and removing rbd block devices.
+
+Usage: <mon ip addr> <options> <pool name> <rbd image name> [<snap name>]
+
+ $ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add
+
+The snapshot name can be "-" or omitted to map the image read/write. A <dev-id>
+will be assigned for any registered block device. If snapshot is used, it will
+be mapped read-only.
+
+Usage: <dev-id> [force]
+
+ $ echo 2 > /sys/bus/rbd/remove
+
+Optional "force" argument which when passed will wait for running requests and
+then unmap the image. Requests sent to the driver after initiating the removal
+will be failed.  (August 2016, since 4.9.)
+
+What:		/sys/bus/rbd/add_single_major
+Date:		December 2013
+KernelVersion:	3.14
+Contact:	Sage Weil <sage@inktank.com>
+Description:	Available only if rbd module is inserted with single_major
+		parameter set to true.
+		Usage is the same as for /sys/bus/rbd/add.  If present,
+		should be used instead of the latter: any attempts to use
+		/sys/bus/rbd/add if /sys/bus/rbd/add_single_major is
+		available will fail for backwards compatibility reasons.
+
+What:		/sys/bus/rbd/remove_single_major
+Date:		December 2013
+KernelVersion:	3.14
+Contact:	Sage Weil <sage@inktank.com>
+Description:	Available only if rbd module is inserted with single_major
+		parameter set to true.
+		Usage is the same as for /sys/bus/rbd/remove.  If present,
+		should be used instead of the latter: any attempts to use
+		/sys/bus/rbd/remove if /sys/bus/rbd/remove_single_major is
+		available will fail for backwards compatibility reasons.
+
+Entries under /sys/bus/rbd/devices/<dev-id>/
+--------------------------------------------
+
+client_addr
+
+	The ceph unique client entity_addr_t (address + nonce).
+	The format is <address>:<port>/<nonce>: '1.2.3.4:1234/5678' or
+	'[1:2:3:4:5:6:7:8]:1234/5678'.  (August 2016, since 4.9.)
+
+client_id
+
+	The ceph unique client id that was assigned for this specific session.
+
+cluster_fsid
+
+	The ceph cluster UUID.  (August 2016, since 4.9.)
+
+config_info
+
+	The string written into /sys/bus/rbd/add{,_single_major}.  (August
+	2016, since 4.9.)
+
+features
+
+	A hexadecimal encoding of the feature bits for this image.
+
+major
+
+	The block device major number.
+
+minor
+
+	The block device minor number.  (December 2013, since 3.14.)
+
+name
+
+	The name of the rbd image.
+
+image_id
+
+	The unique id for the rbd image.  (For rbd image format 1
+	this is empty.)
+
+pool
+
+	The name of the storage pool where this rbd image resides.
+	An rbd image name is unique within its pool.
+
+pool_id
+
+	The unique identifier for the rbd image's pool.  This is
+	a permanent attribute of the pool.  A pool's id will never
+	change.
+
+size
+
+	The size (in bytes) of the mapped block device.
+
+refresh
+
+	Writing to this file will reread the image header data and set
+	all relevant datastructures accordingly.
+
+current_snap
+
+	The current snapshot for which the device is mapped.
+
+snap_id
+
+	The current snapshot's id.  (August 2016, since 4.9.)
+
+parent
+
+	Information identifying the chain of parent images in a layered rbd
+	image.  Entries are separated by empty lines.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-rpmsg b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-rpmsg
new file mode 100644
index 0000000..189e419
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-rpmsg
@@ -0,0 +1,75 @@
+What:		/sys/bus/rpmsg/devices/.../name
+Date:		June 2011
+KernelVersion:	3.3
+Contact:	Ohad Ben-Cohen <ohad@wizery.com>
+Description:
+		Every rpmsg device is a communication channel with a remote
+		processor. Channels are identified with a (textual) name,
+		which is maximum 32 bytes long (defined as RPMSG_NAME_SIZE in
+		rpmsg.h).
+
+		This sysfs entry contains the name of this channel.
+
+What:		/sys/bus/rpmsg/devices/.../src
+Date:		June 2011
+KernelVersion:	3.3
+Contact:	Ohad Ben-Cohen <ohad@wizery.com>
+Description:
+		Every rpmsg device is a communication channel with a remote
+		processor. Channels have a local ("source") rpmsg address,
+		and remote ("destination") rpmsg address. When an entity
+		starts listening on one end of a channel, it assigns it with
+		a unique rpmsg address (a 32 bits integer). This way when
+		inbound messages arrive to this address, the rpmsg core
+		dispatches them to the listening entity (a kernel driver).
+
+		This sysfs entry contains the src (local) rpmsg address
+		of this channel. If it contains 0xffffffff, then an address
+		wasn't assigned (can happen if no driver exists for this
+		channel).
+
+What:		/sys/bus/rpmsg/devices/.../dst
+Date:		June 2011
+KernelVersion:	3.3
+Contact:	Ohad Ben-Cohen <ohad@wizery.com>
+Description:
+		Every rpmsg device is a communication channel with a remote
+		processor. Channels have a local ("source") rpmsg address,
+		and remote ("destination") rpmsg address. When an entity
+		starts listening on one end of a channel, it assigns it with
+		a unique rpmsg address (a 32 bits integer). This way when
+		inbound messages arrive to this address, the rpmsg core
+		dispatches them to the listening entity.
+
+		This sysfs entry contains the dst (remote) rpmsg address
+		of this channel. If it contains 0xffffffff, then an address
+		wasn't assigned (can happen if the kernel driver that
+		is attached to this channel is exposing a service to the
+		remote processor. This make it a local rpmsg server,
+		and it is listening for inbound messages that may be sent
+		from any remote rpmsg client; it is not bound to a single
+		remote entity).
+
+What:		/sys/bus/rpmsg/devices/.../announce
+Date:		June 2011
+KernelVersion:	3.3
+Contact:	Ohad Ben-Cohen <ohad@wizery.com>
+Description:
+		Every rpmsg device is a communication channel with a remote
+		processor. Channels are identified by a textual name (see
+		/sys/bus/rpmsg/devices/.../name above) and have a local
+		("source") rpmsg address, and remote ("destination") rpmsg
+		address.
+
+		A channel is first created when an entity, whether local
+		or remote, starts listening on it for messages (and is thus
+		called an rpmsg server).
+
+		When that happens, a "name service" announcement is sent
+		to the other processor, in order to let it know about the
+		creation of the channel (this way remote clients know they
+		can start sending messages).
+
+		This sysfs entry tells us whether the channel is a local
+		server channel that is announced (values are either
+		true or false).
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-thunderbolt b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-thunderbolt
new file mode 100644
index 0000000..392bef5
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-thunderbolt
@@ -0,0 +1,112 @@
+What: /sys/bus/thunderbolt/devices/.../domainX/security
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	This attribute holds current Thunderbolt security level
+		set by the system BIOS. Possible values are:
+
+		none: All devices are automatically authorized
+		user: Devices are only authorized based on writing
+		      appropriate value to the authorized attribute
+		secure: Require devices that support secure connect at
+			minimum. User needs to authorize each device.
+		dponly: Automatically tunnel Display port (and USB). No
+			PCIe tunnels are created.
+
+What: /sys/bus/thunderbolt/devices/.../authorized
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	This attribute is used to authorize Thunderbolt devices
+		after they have been connected. If the device is not
+		authorized, no devices such as PCIe and Display port are
+		available to the system.
+
+		Contents of this attribute will be 0 when the device is not
+		yet authorized.
+
+		Possible values are supported:
+		1: The device will be authorized and connected
+
+		When key attribute contains 32 byte hex string the possible
+		values are:
+		1: The 32 byte hex string is added to the device NVM and
+		   the device is authorized.
+		2: Send a challenge based on the 32 byte hex string. If the
+		   challenge response from device is valid, the device is
+		   authorized. In case of failure errno will be ENOKEY if
+		   the device did not contain a key at all, and
+		   EKEYREJECTED if the challenge response did not match.
+
+What: /sys/bus/thunderbolt/devices/.../key
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	When a devices supports Thunderbolt secure connect it will
+		have this attribute. Writing 32 byte hex string changes
+		authorization to use the secure connection method instead.
+		Writing an empty string clears the key and regular connection
+		method can be used again.
+
+What:		/sys/bus/thunderbolt/devices/.../device
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	This attribute contains id of this device extracted from
+		the device DROM.
+
+What:		/sys/bus/thunderbolt/devices/.../device_name
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	This attribute contains name of this device extracted from
+		the device DROM.
+
+What:		/sys/bus/thunderbolt/devices/.../vendor
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	This attribute contains vendor id of this device extracted
+		from the device DROM.
+
+What:		/sys/bus/thunderbolt/devices/.../vendor_name
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	This attribute contains vendor name of this device extracted
+		from the device DROM.
+
+What:		/sys/bus/thunderbolt/devices/.../unique_id
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	This attribute contains unique_id string of this device.
+		This is either read from hardware registers (UUID on
+		newer hardware) or based on UID from the device DROM.
+		Can be used to uniquely identify particular device.
+
+What:		/sys/bus/thunderbolt/devices/.../nvm_version
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	If the device has upgradeable firmware the version
+		number is available here. Format: %x.%x, major.minor.
+		If the device is in safe mode reading the file returns
+		-ENODATA instead as the NVM version is not available.
+
+What:		/sys/bus/thunderbolt/devices/.../nvm_authenticate
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	When new NVM image is written to the non-active NVM
+		area (through non_activeX NVMem device), the
+		authentication procedure is started by writing 1 to
+		this file. If everything goes well, the device is
+		restarted with the new NVM firmware. If the image
+		verification fails an error code is returned instead.
+
+		When read holds status of the last authentication
+		operation if an error occurred during the process. This
+		is directly the status value from the DMA configuration
+		based mailbox before the device is power cycled. Writing
+		0 here clears the status.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-umc b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-umc
new file mode 100644
index 0000000..948fec4
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-umc
@@ -0,0 +1,28 @@
+What:           /sys/bus/umc/
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The Wireless Host Controller Interface (WHCI)
+                specification describes a PCI-based device with
+                multiple capabilities; the UWB Multi-interface
+                Controller (UMC).
+
+                The umc bus presents each of the individual
+                capabilties as a device.
+
+What:           /sys/bus/umc/devices/.../capability_id
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The ID of this capability, with 0 being the radio
+                controller capability.
+
+What:           /sys/bus/umc/devices/.../version
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The specification version this capability's hardware
+                interface complies with.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-usb b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-usb
new file mode 100644
index 0000000..0bd731c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-usb
@@ -0,0 +1,228 @@
+What:		/sys/bus/usb/devices/INTERFACE/authorized
+Date:		August 2015
+Description:
+		This allows to authorize (1) or deauthorize (0)
+		individual interfaces instead a whole device
+		in contrast to the device authorization.
+		If a deauthorized interface will be authorized
+		so the driver probing must be triggered manually
+		by writing INTERFACE to /sys/bus/usb/drivers_probe
+		This allows to avoid side-effects with drivers
+		that need multiple interfaces.
+		A deauthorized interface cannot be probed or claimed.
+
+What:		/sys/bus/usb/devices/usbX/interface_authorized_default
+Date:		August 2015
+Description:
+		This is used as value that determines if interfaces
+		would be authorized by default.
+		The value can be 1 or 0. It's by default 1.
+
+What:		/sys/bus/usb/device/.../authorized
+Date:		July 2008
+KernelVersion:	2.6.26
+Contact:	David Vrabel <david.vrabel@csr.com>
+Description:
+		Authorized devices are available for use by device
+		drivers, non-authorized one are not.  By default, wired
+		USB devices are authorized.
+
+		Certified Wireless USB devices are not authorized
+		initially and should be (by writing 1) after the
+		device has been authenticated.
+
+What:		/sys/bus/usb/device/.../wusb_cdid
+Date:		July 2008
+KernelVersion:	2.6.27
+Contact:	David Vrabel <david.vrabel@csr.com>
+Description:
+		For Certified Wireless USB devices only.
+
+		A devices's CDID, as 16 space-separated hex octets.
+
+What:		/sys/bus/usb/device/.../wusb_ck
+Date:		July 2008
+KernelVersion:	2.6.27
+Contact:	David Vrabel <david.vrabel@csr.com>
+Description:
+		For Certified Wireless USB devices only.
+
+		Write the device's connection key (CK) to start the
+		authentication of the device.  The CK is 16
+		space-separated hex octets.
+
+What:		/sys/bus/usb/device/.../wusb_disconnect
+Date:		July 2008
+KernelVersion:	2.6.27
+Contact:	David Vrabel <david.vrabel@csr.com>
+Description:
+		For Certified Wireless USB devices only.
+
+		Write a 1 to force the device to disconnect
+		(equivalent to unplugging a wired USB device).
+
+What:		/sys/bus/usb/drivers/.../new_id
+Date:		October 2011
+Contact:	linux-usb@vger.kernel.org
+Description:
+		Writing a device ID to this file will attempt to
+		dynamically add a new device ID to a USB device driver.
+		This may allow the driver to support more hardware than
+		was included in the driver's static device ID support
+		table at compile time. The format for the device ID is:
+		idVendor idProduct bInterfaceClass RefIdVendor RefIdProduct
+		The vendor ID and device ID fields are required, the
+		rest is optional. The Ref* tuple can be used to tell the
+		driver to use the same driver_data for the new device as
+		it is used for the reference device.
+		Upon successfully adding an ID, the driver will probe
+		for the device and attempt to bind to it.  For example:
+		# echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id
+
+		Here add a new device (0458:7045) using driver_data from
+		an already supported device (0458:704c):
+		# echo "0458 7045 0 0458 704c" > /sys/bus/usb/drivers/foo/new_id
+
+		Reading from this file will list all dynamically added
+		device IDs in the same format, with one entry per
+		line. For example:
+		# cat /sys/bus/usb/drivers/foo/new_id
+		8086 10f5
+		dead beef 06
+		f00d cafe
+
+		The list will be truncated at PAGE_SIZE bytes due to
+		sysfs restrictions.
+
+What:		/sys/bus/usb-serial/drivers/.../new_id
+Date:		October 2011
+Contact:	linux-usb@vger.kernel.org
+Description:
+		For serial USB drivers, this attribute appears under the
+		extra bus folder "usb-serial" in sysfs; apart from that
+		difference, all descriptions from the entry
+		"/sys/bus/usb/drivers/.../new_id" apply.
+
+What:		/sys/bus/usb/drivers/.../remove_id
+Date:		November 2009
+Contact:	CHENG Renquan <rqcheng@smu.edu.sg>
+Description:
+		Writing a device ID to this file will remove an ID
+		that was dynamically added via the new_id sysfs entry.
+		The format for the device ID is:
+		idVendor idProduct.	After successfully
+		removing an ID, the driver will no longer support the
+		device.  This is useful to ensure auto probing won't
+		match the driver to the device.  For example:
+		# echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id
+
+		Reading from this file will list the dynamically added
+		device IDs, exactly like reading from the entry
+		"/sys/bus/usb/drivers/.../new_id"
+
+What:		/sys/bus/usb/devices/.../power/usb2_hardware_lpm
+Date:		September 2011
+Contact:	Andiry Xu <andiry.xu@amd.com>
+Description:
+		If CONFIG_PM is set and a USB 2.0 lpm-capable device is plugged
+		in to a xHCI host which support link PM, it will perform a LPM
+		test; if the test is passed and host supports USB2 hardware LPM
+		(xHCI 1.0 feature), USB2 hardware LPM will be enabled for the
+		device and the USB device directory will contain a file named
+		power/usb2_hardware_lpm.  The file holds a string value (enable
+		or disable) indicating whether or not USB2 hardware LPM is
+		enabled for the device. Developer can write y/Y/1 or n/N/0 to
+		the file to enable/disable the feature.
+
+What:		/sys/bus/usb/devices/.../power/usb3_hardware_lpm_u1
+		/sys/bus/usb/devices/.../power/usb3_hardware_lpm_u2
+Date:		November 2015
+Contact:	Kevin Strasser <kevin.strasser@linux.intel.com>
+		Lu Baolu <baolu.lu@linux.intel.com>
+Description:
+		If CONFIG_PM is set and a USB 3.0 lpm-capable device is plugged
+		in to a xHCI host which supports link PM, it will check if U1
+		and U2 exit latencies have been set in the BOS descriptor; if
+		the check is passed and the host supports USB3 hardware LPM,
+		USB3 hardware LPM will be enabled for the device and the USB
+		device directory will contain two files named
+		power/usb3_hardware_lpm_u1 and power/usb3_hardware_lpm_u2. These
+		files hold a string value (enable or disable) indicating whether
+		or not USB3 hardware LPM U1 or U2 is enabled for the device.
+
+What:		/sys/bus/usb/devices/.../removable
+Date:		February 2012
+Contact:	Matthew Garrett <mjg@redhat.com>
+Description:
+		Some information about whether a given USB device is
+		physically fixed to the platform can be inferred from a
+		combination of hub descriptor bits and platform-specific data
+		such as ACPI. This file will read either "removable" or
+		"fixed" if the information is available, and "unknown"
+		otherwise.
+
+What:		/sys/bus/usb/devices/.../ltm_capable
+Date:		July 2012
+Contact:	Sarah Sharp <sarah.a.sharp@linux.intel.com>
+Description:
+		USB 3.0 devices may optionally support Latency Tolerance
+		Messaging (LTM).  They indicate their support by setting a bit
+		in the bmAttributes field of their SuperSpeed BOS descriptors.
+		If that bit is set for the device, ltm_capable will read "yes".
+		If the device doesn't support LTM, the file will read "no".
+		The file will be present for all speeds of USB devices, and will
+		always read "no" for USB 1.1 and USB 2.0 devices.
+
+What:		/sys/bus/usb/devices/.../(hub interface)/portX
+Date:		August 2012
+Contact:	Lan Tianyu <tianyu.lan@intel.com>
+Description:
+		The /sys/bus/usb/devices/.../(hub interface)/portX
+		is usb port device's sysfs directory.
+
+What:		/sys/bus/usb/devices/.../(hub interface)/portX/connect_type
+Date:		January 2013
+Contact:	Lan Tianyu <tianyu.lan@intel.com>
+Description:
+		Some platforms provide usb port connect types through ACPI.
+		This attribute is to expose these information to user space.
+		The file will read "hotplug", "wired" and "not used" if the
+		information is available, and "unknown" otherwise.
+
+What:		/sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit
+Date:		November 2015
+Contact:	Lu Baolu <baolu.lu@linux.intel.com>
+Description:
+		Some USB3.0 devices are not friendly to USB3 LPM.  usb3_lpm_permit
+		attribute allows enabling/disabling usb3 lpm of a port. It takes
+		effect both before and after a usb device is enumerated. Supported
+		values are "0" if both u1 and u2 are NOT permitted, "u1" if only u1
+		is permitted, "u2" if only u2 is permitted, "u1_u2" if both u1 and
+		u2 are permitted.
+
+What:		/sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout
+Date:		May 2013
+Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
+Description:
+		USB 2.0 devices may support hardware link power management (LPM)
+		L1 sleep state. The usb2_lpm_l1_timeout attribute allows
+		tuning the timeout for L1 inactivity timer (LPM timer), e.g.
+		needed inactivity time before host requests the device to go to L1 sleep.
+		Useful for power management tuning.
+		Supported values are 0 - 65535 microseconds.
+
+What:		/sys/bus/usb/devices/.../power/usb2_lpm_besl
+Date:		May 2013
+Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
+Description:
+		USB 2.0 devices that support hardware link power management (LPM)
+		L1 sleep state now use a best effort service latency value (BESL) to
+		indicate the best effort to resumption of service to the device after the
+		initiation of the resume event.
+		If the device does not have a preferred besl value then the host can select
+		one instead. This usb2_lpm_besl attribute allows to tune the host selected besl
+		value in order to tune power saving and service latency.
+
+		Supported values are 0 - 15.
+		More information on how besl values map to microseconds can be found in
+		USB 2.0 ECN Errata for Link Power Management, section 4.10)
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg
new file mode 100644
index 0000000..70d00df
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg
@@ -0,0 +1,43 @@
+Where:		/sys/bus/usb/.../powered
+Date:		August 2008
+Kernel Version:	2.6.26
+Contact:	Harrison Metzger <harrisonmetz@gmail.com>
+Description:	Controls whether the device's display will powered.
+		A value of 0 is off and a non-zero value is on.
+
+Where:		/sys/bus/usb/.../mode_msb
+Where:		/sys/bus/usb/.../mode_lsb
+Date:		August 2008
+Kernel Version:	2.6.26
+Contact:	Harrison Metzger <harrisonmetz@gmail.com>
+Description:	Controls the devices display mode.
+		For a 6 character display the values are
+			MSB 0x06; LSB 0x3F, and
+		for an 8 character display the values are
+			MSB 0x08; LSB 0xFF.
+
+Where:		/sys/bus/usb/.../textmode
+Date:		August 2008
+Kernel Version:	2.6.26
+Contact:	Harrison Metzger <harrisonmetz@gmail.com>
+Description:	Controls the way the device interprets its text buffer.
+		raw:	each character controls its segment manually
+		hex:	each character is between 0-15
+		ascii:	each character is between '0'-'9' and 'A'-'F'.
+
+Where:		/sys/bus/usb/.../text
+Date:		August 2008
+Kernel Version:	2.6.26
+Contact:	Harrison Metzger <harrisonmetz@gmail.com>
+Description:	The text (or data) for the device to display
+
+Where:		/sys/bus/usb/.../decimals
+Date:		August 2008
+Kernel Version:	2.6.26
+Contact:	Harrison Metzger <harrisonmetz@gmail.com>
+Description:	Controls the decimal places on the device.
+		To set the nth decimal place, give this field
+		the value of 10 ** n. Assume this field has
+		the value k and has 1 or more decimal places set,
+		to set the mth place (where m is not already set),
+		change this fields value to k + 10 ** m.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-usb-lvstest b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-usb-lvstest
new file mode 100644
index 0000000..ee0046d
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-usb-lvstest
@@ -0,0 +1,60 @@
+Link Layer Validation Device is a standard device for testing of Super
+Speed Link Layer tests. These nodes are available in sysfs only when lvs
+driver is bound with root hub device.
+
+What:		/sys/bus/usb/devices/.../get_dev_desc
+Date:		March 2014
+Contact:	Pratyush Anand <pratyush.anand@gmail.com>
+Description:
+		Write to this node to issue "Get Device Descriptor"
+		for Link Layer Validation device. It is needed for TD.7.06.
+
+What:		/sys/bus/usb/devices/.../u1_timeout
+Date:		March 2014
+Contact:	Pratyush Anand <pratyush.anand@gmail.com>
+Description:
+		Set "U1 timeout" for the downstream port where Link Layer
+		Validation device is connected. Timeout value must be between 0
+		and 127. It is needed for TD.7.18, TD.7.19, TD.7.20 and TD.7.21.
+
+What:		/sys/bus/usb/devices/.../u2_timeout
+Date:		March 2014
+Contact:	Pratyush Anand <pratyush.anand@gmail.com>
+Description:
+		Set "U2 timeout" for the downstream port where Link Layer
+		Validation device is connected. Timeout value must be between 0
+		and 127. It is needed for TD.7.18, TD.7.19, TD.7.20 and TD.7.21.
+
+What:		/sys/bus/usb/devices/.../hot_reset
+Date:		March 2014
+Contact:	Pratyush Anand <pratyush.anand@gmail.com>
+Description:
+		Write to this node to issue "Reset" for Link Layer Validation
+		device. It is needed for TD.7.29, TD.7.31, TD.7.34 and TD.7.35.
+
+What:		/sys/bus/usb/devices/.../u3_entry
+Date:		March 2014
+Contact:	Pratyush Anand <pratyush.anand@gmail.com>
+Description:
+		Write to this node to issue "U3 entry" for Link Layer
+		Validation device. It is needed for TD.7.35 and TD.7.36.
+
+What:		/sys/bus/usb/devices/.../u3_exit
+Date:		March 2014
+Contact:	Pratyush Anand <pratyush.anand@gmail.com>
+Description:
+		Write to this node to issue "U3 exit" for Link Layer
+		Validation device. It is needed for TD.7.36.
+
+What:		/sys/bus/usb/devices/.../enable_compliance
+Date:		July 2017
+Description:
+		Write to this node to set the port to compliance mode to test
+		with Link Layer Validation device. It is needed for TD.7.34.
+
+What:		/sys/bus/usb/devices/.../warm_reset
+Date:		July 2017
+Description:
+		Write to this node to issue "Warm Reset" for Link Layer Validation
+		device. It may be needed to properly reset an xHCI 1.1 host port if
+		compliance mode needed to be explicitly enabled.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-vfio-mdev b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-vfio-mdev
new file mode 100644
index 0000000..452dbe3
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-bus-vfio-mdev
@@ -0,0 +1,111 @@
+What:           /sys/.../<device>/mdev_supported_types/
+Date:           October 2016
+Contact:        Kirti Wankhede <kwankhede@nvidia.com>
+Description:
+                This directory contains list of directories of currently
+		supported mediated device types and their details for
+		<device>. Supported type attributes are defined by the
+		vendor driver who registers with Mediated device framework.
+		Each supported type is a directory whose name is created
+		by adding the device driver string as a prefix to the
+		string provided by the vendor driver.
+
+What:           /sys/.../<device>/mdev_supported_types/<type-id>/
+Date:           October 2016
+Contact:        Kirti Wankhede <kwankhede@nvidia.com>
+Description:
+                This directory gives details of supported type, like name,
+		description, available_instances, device_api etc.
+		'device_api' and 'available_instances' are mandatory
+		attributes to be provided by vendor driver. 'name',
+		'description' and other vendor driver specific attributes
+		are optional.
+
+What:           /sys/.../mdev_supported_types/<type-id>/create
+Date:           October 2016
+Contact:        Kirti Wankhede <kwankhede@nvidia.com>
+Description:
+		Writing UUID to this file will create mediated device of
+		type <type-id> for parent device <device>. This is a
+		write-only file.
+		For example:
+		# echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1001" >	\
+		       /sys/devices/foo/mdev_supported_types/foo-1/create
+
+What:           /sys/.../mdev_supported_types/<type-id>/devices/
+Date:           October 2016
+Contact:        Kirti Wankhede <kwankhede@nvidia.com>
+Description:
+		This directory contains symbolic links pointing to mdev
+		devices sysfs entries which are created of this <type-id>.
+
+What:           /sys/.../mdev_supported_types/<type-id>/available_instances
+Date:           October 2016
+Contact:        Kirti Wankhede <kwankhede@nvidia.com>
+Description:
+		Reading this attribute will show the number of mediated
+		devices of type <type-id> that can be created. This is a
+		readonly file.
+Users:
+		Userspace applications interested in creating mediated
+		device of that type. Userspace application should check
+		the number of available instances could be created before
+		creating mediated device of this type.
+
+What:           /sys/.../mdev_supported_types/<type-id>/device_api
+Date:           October 2016
+Contact:        Kirti Wankhede <kwankhede@nvidia.com>
+Description:
+		Reading this attribute will show VFIO device API supported
+		by this type. For example, "vfio-pci" for a PCI device,
+		"vfio-platform" for platform device.
+
+What:           /sys/.../mdev_supported_types/<type-id>/name
+Date:           October 2016
+Contact:        Kirti Wankhede <kwankhede@nvidia.com>
+Description:
+		Reading this attribute will show human readable name of the
+		mediated device that will get created of type <type-id>.
+		This is optional attribute. For example: "Grid M60-0Q"
+Users:
+		Userspace applications interested in knowing the name of
+		a particular <type-id> that can help in understanding the
+		type of mediated device.
+
+What:           /sys/.../mdev_supported_types/<type-id>/description
+Date:           October 2016
+Contact:        Kirti Wankhede <kwankhede@nvidia.com>
+Description:
+		Reading this attribute will show description of the type of
+		mediated device that will get created of type <type-id>.
+		This is optional attribute. For example:
+		"2 heads, 512M FB, 2560x1600 maximum resolution"
+Users:
+		Userspace applications interested in knowing the details of
+		a particular <type-id> that can help in understanding the
+		features provided by that type of mediated device.
+
+What:           /sys/.../<device>/<UUID>/
+Date:           October 2016
+Contact:        Kirti Wankhede <kwankhede@nvidia.com>
+Description:
+		This directory represents device directory of mediated
+		device. It contains all the attributes related to mediated
+		device.
+
+What:           /sys/.../<device>/<UUID>/mdev_type
+Date:           October 2016
+Contact:        Kirti Wankhede <kwankhede@nvidia.com>
+Description:
+		This is symbolic link pointing to supported type, <type-id>
+		directory of which this mediated device is created.
+
+What:           /sys/.../<device>/<UUID>/remove
+Date:           October 2016
+Contact:        Kirti Wankhede <kwankhede@nvidia.com>
+Description:
+		Writing '1' to this file destroys the mediated device. The
+		vendor driver can fail the remove() callback if that device
+		is active and the vendor driver doesn't support hot unplug.
+		Example:
+		# echo 1 > /sys/bus/mdev/devices/<UUID>/remove
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-c2port b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-c2port
new file mode 100644
index 0000000..716cffc
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-c2port
@@ -0,0 +1,88 @@
+What:		/sys/class/c2port/
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/ directory will contain files and
+		directories that will provide a unified interface to
+		the C2 port interface.
+
+What:		/sys/class/c2port/c2portX
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/ directory is related to X-th
+		C2 port into the system. Each directory will contain files to
+		manage and control its C2 port.
+
+What:		/sys/class/c2port/c2portX/access
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/access file enable the access
+		to the C2 port from the system. No commands can be sent
+		till this entry is set to 0.
+
+What:		/sys/class/c2port/c2portX/dev_id
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/dev_id file show the device ID
+		of the connected micro.
+
+What:		/sys/class/c2port/c2portX/flash_access
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_access file enable the
+		access to the on-board flash of the connected micro.
+		No commands can be sent till this entry is set to 0.
+
+What:		/sys/class/c2port/c2portX/flash_block_size
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_block_size file show
+		the on-board flash block size of the connected micro.
+
+What:		/sys/class/c2port/c2portX/flash_blocks_num
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_blocks_num file show
+		the on-board flash blocks number of the connected micro.
+
+What:		/sys/class/c2port/c2portX/flash_data
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_data file export
+		the content of the on-board flash of the connected micro.
+
+What:		/sys/class/c2port/c2portX/flash_erase
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_erase file execute
+		the "erase" command on the on-board flash of the connected
+		micro.
+
+What:		/sys/class/c2port/c2portX/flash_erase
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_erase file show the
+		on-board flash size of the connected micro.
+
+What:		/sys/class/c2port/c2portX/reset
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/reset file execute a "reset"
+		command on the connected micro.
+
+What:		/sys/class/c2port/c2portX/rev_id
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/rev_id file show the revision ID
+		of the connected micro.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-cfq-target-latency b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-cfq-target-latency
new file mode 100644
index 0000000..df0f782
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-cfq-target-latency
@@ -0,0 +1,8 @@
+What:		/sys/block/<device>/iosched/target_latency
+Date:		March 2012
+contact:	Tao Ma <boyu.mt@taobao.com>
+Description:
+		The /sys/block/<device>/iosched/target_latency only exists
+		when the user sets cfq to /sys/block/<device>/scheduler.
+		It contains an estimated latency time for the cfq. cfq will
+		use it to calculate the time slice used for every task.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class
new file mode 100644
index 0000000..676530f
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class
@@ -0,0 +1,16 @@
+What:		/sys/class/
+Date:		Febuary 2006
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		The /sys/class directory will consist of a group of
+		subdirectories describing individual classes of devices
+		in the kernel.  The individual directories will consist
+		of either subdirectories, or symlinks to other
+		directories.
+
+		All programs that use this directory tree must be able
+		to handle both subdirectories or symlinks in order to
+		work properly.
+
+Users:
+	udev <linux-hotplug-devel@lists.sourceforge.net>
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870
new file mode 100644
index 0000000..33e6488
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870
@@ -0,0 +1,56 @@
+What:		/sys/class/backlight/<backlight>/<ambient light zone>_max
+What:		/sys/class/backlight/<backlight>/l1_daylight_max
+What:		/sys/class/backlight/<backlight>/l2_bright_max
+What:		/sys/class/backlight/<backlight>/l3_office_max
+What:		/sys/class/backlight/<backlight>/l4_indoor_max
+What:		/sys/class/backlight/<backlight>/l5_dark_max
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	device-drivers-devel@blackfin.uclinux.org
+Description:
+		Control the maximum brightness for <ambient light zone>
+		on this <backlight>. Values are between 0 and 127. This file
+		will also show the brightness level stored for this
+		<ambient light zone>.
+
+What:		/sys/class/backlight/<backlight>/<ambient light zone>_dim
+What:		/sys/class/backlight/<backlight>/l2_bright_dim
+What:		/sys/class/backlight/<backlight>/l3_office_dim
+What:		/sys/class/backlight/<backlight>/l4_indoor_dim
+What:		/sys/class/backlight/<backlight>/l5_dark_dim
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	device-drivers-devel@blackfin.uclinux.org
+Description:
+		Control the dim brightness for <ambient light zone>
+		on this <backlight>. Values are between 0 and 127, typically
+		set to 0. Full off when the backlight is disabled.
+		This file will also show the dim brightness level stored for
+		this <ambient light zone>.
+
+What:		/sys/class/backlight/<backlight>/ambient_light_level
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	device-drivers-devel@blackfin.uclinux.org
+Description:
+		Get conversion value of the light sensor.
+		This value is updated every 80 ms (when the light sensor
+		is enabled). Returns integer between 0 (dark) and
+		8000 (max ambient brightness)
+
+What:		/sys/class/backlight/<backlight>/ambient_light_zone
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	device-drivers-devel@blackfin.uclinux.org
+Description:
+		Get/Set current ambient light zone. Reading returns
+		integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark).
+		Writing a value between 1..5 forces the backlight controller
+		to enter the corresponding ambient light zone.
+		Writing 0 returns to normal/automatic ambient light level
+		operation. The ambient light sensing feature on these devices
+		is an extension to the API documented in
+		Documentation/ABI/stable/sysfs-class-backlight.
+		It can be enabled by writing the value stored in
+		/sys/class/backlight/<backlight>/max_brightness to
+		/sys/class/backlight/<backlight>/brightness.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533
new file mode 100644
index 0000000..77cf7ac
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533
@@ -0,0 +1,48 @@
+What:		/sys/class/backlight/<backlight>/als_channel
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get the ALS output channel used as input in
+		ALS-current-control mode (0, 1), where
+
+		0 - out_current0 (backlight 0)
+		1 - out_current1 (backlight 1)
+
+What:		/sys/class/backlight/<backlight>/als_en
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Enable ALS-current-control mode (0, 1).
+
+What:		/sys/class/backlight/<backlight>/id
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get the id of this backlight (0, 1).
+
+What:		/sys/class/backlight/<backlight>/linear
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the brightness-mapping mode (0, 1), where
+
+		0 - exponential mode
+		1 - linear mode
+
+What:		/sys/class/backlight/<backlight>/pwm
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the PWM-input control mask (5 bits), where
+
+		bit 5 - PWM-input enabled in Zone 4
+		bit 4 - PWM-input enabled in Zone 3
+		bit 3 - PWM-input enabled in Zone 2
+		bit 2 - PWM-input enabled in Zone 1
+		bit 1 - PWM-input enabled in Zone 0
+		bit 0 - PWM-input enabled
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-bdi b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-bdi
new file mode 100644
index 0000000..d773d56
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-bdi
@@ -0,0 +1,55 @@
+What:		/sys/class/bdi/<bdi>/
+Date:		January 2008
+Contact:	Peter Zijlstra <a.p.zijlstra@chello.nl>
+Description:
+
+Provide a place in sysfs for the backing_dev_info object.  This allows
+setting and retrieving various BDI specific variables.
+
+The <bdi> identifier can be either of the following:
+
+MAJOR:MINOR
+
+	Device number for block devices, or value of st_dev on
+	non-block filesystems which provide their own BDI, such as NFS
+	and FUSE.
+
+MAJOR:MINOR-fuseblk
+
+	Value of st_dev on fuseblk filesystems.
+
+default
+
+	The default backing dev, used for non-block device backed
+	filesystems which do not provide their own BDI.
+
+Files under /sys/class/bdi/<bdi>/
+---------------------------------
+
+read_ahead_kb (read-write)
+
+	Size of the read-ahead window in kilobytes
+
+min_ratio (read-write)
+
+	Under normal circumstances each device is given a part of the
+	total write-back cache that relates to its current average
+	writeout speed in relation to the other devices.
+
+	The 'min_ratio' parameter allows assigning a minimum
+	percentage of the write-back cache to a particular device.
+	For example, this is useful for providing a minimum QoS.
+
+max_ratio (read-write)
+
+	Allows limiting a particular device to use not more than the
+	given percentage of the write-back cache.  This is useful in
+	situations where we want to avoid one device taking all or
+	most of the write-back cache.  For example in case of an NFS
+	mount that is prone to get stuck, or a FUSE mount which cannot
+	be trusted to play fair.
+
+stable_pages_required (read-only)
+
+	If set, the backing device requires that all pages comprising a write
+	request must not be changed until writeout is complete.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-cxl b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-cxl
new file mode 100644
index 0000000..267920a
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-cxl
@@ -0,0 +1,248 @@
+Note: Attributes that are shared between devices are stored in the directory
+pointed to by the symlink device/.
+Example: The real path of the attribute /sys/class/cxl/afu0.0s/irqs_max is
+/sys/class/cxl/afu0.0s/device/irqs_max, i.e. /sys/class/cxl/afu0.0/irqs_max.
+
+
+Slave contexts (eg. /sys/class/cxl/afu0.0s):
+
+What:           /sys/class/cxl/<afu>/afu_err_buf
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+                AFU Error Buffer contents. The contents of this file are
+		application specific and depends on the AFU being used.
+		Applications interacting with the AFU can use this attribute
+		to know about the current error condition and take appropriate
+		action like logging the event etc.
+
+
+What:           /sys/class/cxl/<afu>/irqs_max
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read/write
+                Decimal value of maximum number of interrupts that can be
+                requested by userspace.  The default on probe is the maximum
+                that hardware can support (eg. 2037). Write values will limit
+                userspace applications to that many userspace interrupts. Must
+                be >= irqs_min.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<afu>/irqs_min
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+                Decimal value of the minimum number of interrupts that
+                userspace must request on a CXL_START_WORK ioctl. Userspace may
+                omit the num_interrupts field in the START_WORK IOCTL to get
+                this minimum automatically.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<afu>/mmio_size
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+                Decimal value of the size of the MMIO space that may be mmaped
+                by userspace.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<afu>/modes_supported
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+                List of the modes this AFU supports. One per line.
+                Valid entries are: "dedicated_process" and "afu_directed"
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<afu>/mode
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read/write
+                The current mode the AFU is using. Will be one of the modes
+                given in modes_supported. Writing will change the mode
+                provided that no user contexts are attached.
+Users:		https://github.com/ibm-capi/libcxl
+
+
+What:           /sys/class/cxl/<afu>/prefault_mode
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read/write
+                Set the mode for prefaulting in segments into the segment table
+                when performing the START_WORK ioctl. Only applicable when
+                running under hashed page table mmu.
+                Possible values:
+                        none: No prefaulting (default)
+                        work_element_descriptor: Treat the work element
+                                 descriptor as an effective address and
+                                 prefault what it points to.
+                        all: all segments process calling START_WORK maps.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<afu>/reset
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    write only
+                Writing 1 here will reset the AFU provided there are not
+                contexts active on the AFU.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<afu>/api_version
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+                Decimal value of the current version of the kernel/user API.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<afu>/api_version_compatible
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+                Decimal value of the the lowest version of the userspace API
+                this this kernel supports.
+Users:		https://github.com/ibm-capi/libcxl
+
+
+AFU configuration records (eg. /sys/class/cxl/afu0.0/cr0):
+
+An AFU may optionally export one or more PCIe like configuration records, known
+as AFU configuration records, which will show up here (if present).
+
+What:           /sys/class/cxl/<afu>/cr<config num>/vendor
+Date:           February 2015
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+		Hexadecimal value of the vendor ID found in this AFU
+		configuration record.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<afu>/cr<config num>/device
+Date:           February 2015
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+		Hexadecimal value of the device ID found in this AFU
+		configuration record.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<afu>/cr<config num>/class
+Date:           February 2015
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+		Hexadecimal value of the class code found in this AFU
+		configuration record.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<afu>/cr<config num>/config
+Date:           February 2015
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+		This binary file provides raw access to the AFU configuration
+		record. The format is expected to match the either the standard
+		or extended configuration space defined by the PCIe
+		specification.
+Users:		https://github.com/ibm-capi/libcxl
+
+
+
+Master contexts (eg. /sys/class/cxl/afu0.0m)
+
+What:           /sys/class/cxl/<afu>m/mmio_size
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+                Decimal value of the size of the MMIO space that may be mmaped
+                by userspace. This includes all slave contexts space also.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<afu>m/pp_mmio_len
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+                Decimal value of the Per Process MMIO space length.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<afu>m/pp_mmio_off (not in a guest)
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+                Decimal value of the Per Process MMIO space offset.
+Users:		https://github.com/ibm-capi/libcxl
+
+
+Card info (eg. /sys/class/cxl/card0)
+
+What:           /sys/class/cxl/<card>/caia_version
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+                Identifies the CAIA Version the card implements.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<card>/psl_revision
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+                Identifies the revision level of the PSL.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<card>/base_image (not in a guest)
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+                Identifies the revision level of the base image for devices
+                that support loadable PSLs. For FPGAs this field identifies
+                the image contained in the on-adapter flash which is loaded
+                during the initial program load.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<card>/image_loaded (not in a guest)
+Date:           September 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+                Will return "user" or "factory" depending on the image loaded
+                onto the card.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<card>/load_image_on_perst (not in a guest)
+Date:           December 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read/write
+                Valid entries are "none", "user", and "factory".
+                "none" means PERST will not cause image to be loaded to the
+                card.  A power cycle is required to load the image.
+                "none" could be useful for debugging because the trace arrays
+                are preserved.
+                "user" and "factory" means PERST will cause either the user or
+                user or factory image to be loaded.
+                Default is to reload on PERST whichever image the card has
+                loaded.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<card>/reset
+Date:           October 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    write only
+                Writing 1 will issue a PERST to card provided there are no
+                contexts active on any one of the card AFUs. This may cause
+                the card to reload the FPGA depending on load_image_on_perst.
+                Writing -1 will do a force PERST irrespective of any active
+                contexts on the card AFUs.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:		/sys/class/cxl/<card>/perst_reloads_same_image (not in a guest)
+Date:		July 2015
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read/write
+		Trust that when an image is reloaded via PERST, it will not
+		have changed.
+		0 = don't trust, the image may be different (default)
+		1 = trust that the image will not change.
+Users:		https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<card>/psl_timebase_synced
+Date:           March 2016
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+                Returns 1 if the psl timebase register is synchronized
+                with the core timebase register, 0 otherwise.
+Users:          https://github.com/ibm-capi/libcxl
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-devfreq b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-devfreq
new file mode 100644
index 0000000..335595a
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-devfreq
@@ -0,0 +1,107 @@
+What:		/sys/class/devfreq/.../
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		Provide a place in sysfs for the devfreq objects.
+		This allows accessing various devfreq specific variables.
+		The name of devfreq object denoted as ... is same as the
+		name of device using devfreq.
+
+What:		/sys/class/devfreq/.../name
+Date:		November 2019
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		The /sys/class/devfreq/.../name shows the name of device
+		of the corresponding devfreq object.
+
+What:		/sys/class/devfreq/.../governor
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../governor show or set the name of the
+		governor used by the corresponding devfreq object.
+
+What:		/sys/class/devfreq/.../cur_freq
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../cur_freq shows the current
+		frequency of the corresponding devfreq object. Same as
+		target_freq when get_cur_freq() is not implemented by
+		devfreq driver.
+
+What:		/sys/class/devfreq/.../target_freq
+Date:		September 2012
+Contact:	Rajagopal Venkat <rajagopal.venkat@linaro.org>
+Description:
+		The /sys/class/devfreq/.../target_freq shows the next governor
+		predicted target frequency of the corresponding devfreq object.
+
+What:		/sys/class/devfreq/.../polling_interval
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../polling_interval shows and sets
+		the requested polling interval of the corresponding devfreq
+		object. The values are represented in ms. If the value is
+		less than 1 jiffy, it is considered to be 0, which means
+		no polling. This value is meaningless if the governor is
+		not polling; thus. If the governor is not using
+		devfreq-provided central polling
+		(/sys/class/devfreq/.../central_polling is 0), this value
+		may be useless.
+
+What:		/sys/class/devfreq/.../trans_stat
+Date:		October 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Descrtiption:
+		This ABI shows the statistics of devfreq behavior on a
+		specific device. It shows the time spent in each state and
+		the number of transitions between states.
+		In order to activate this ABI, the devfreq target device
+		driver should provide the list of available frequencies
+		with its profile.
+
+What:		/sys/class/devfreq/.../userspace/set_freq
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../userspace/set_freq shows and
+		sets the requested frequency for the devfreq object if
+		userspace governor is in effect.
+
+What:		/sys/class/devfreq/.../available_frequencies
+Date:		October 2012
+Contact:	Nishanth Menon <nm@ti.com>
+Description:
+		The /sys/class/devfreq/.../available_frequencies shows
+		the available frequencies of the corresponding devfreq object.
+		This is a snapshot of available frequencies and not limited
+		by the min/max frequency restrictions.
+
+What:		/sys/class/devfreq/.../available_governors
+Date:		October 2012
+Contact:	Nishanth Menon <nm@ti.com>
+Description:
+		The /sys/class/devfreq/.../available_governors shows
+		currently available governors in the system.
+
+What:		/sys/class/devfreq/.../min_freq
+Date:		January 2013
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../min_freq shows and stores
+		the minimum frequency requested by users. It is 0 if
+		the user does not care. min_freq overrides the
+		frequency requested by governors.
+
+What:		/sys/class/devfreq/.../max_freq
+Date:		January 2013
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../max_freq shows and stores
+		the maximum frequency requested by users. It is 0 if
+		the user does not care. max_freq overrides the
+		frequency requested by governors and min_freq.
+		The max_freq overrides min_freq because max_freq may be
+		used to throttle devices to avoid overheating.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-devfreq-event b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-devfreq-event
new file mode 100644
index 0000000..ceaf0f6
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-devfreq-event
@@ -0,0 +1,25 @@
+What:		/sys/class/devfreq-event/event(x)/
+Date:		January 2017
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		Provide a place in sysfs for the devfreq-event objects.
+		This allows accessing various devfreq-event specific variables.
+		The name of devfreq-event object denoted as 'event(x)' which
+		includes the unique number of 'x' for each devfreq-event object.
+
+What:		/sys/class/devfreq-event/event(x)/name
+Date:		January 2017
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		The /sys/class/devfreq-event/event(x)/name attribute contains
+		the name of the devfreq-event object. This attribute is
+		read-only.
+
+What:		/sys/class/devfreq-event/event(x)/enable_count
+Date:		January 2017
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		The /sys/class/devfreq-event/event(x)/enable_count attribute
+		contains the reference count to enable the devfreq-event
+		object. If the device is enabled, the value of attribute is
+		greater than zero.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-dual-role-usb b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-dual-role-usb
new file mode 100644
index 0000000..a900fd7
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-dual-role-usb
@@ -0,0 +1,71 @@
+What:		/sys/class/dual_role_usb/.../
+Date:		June 2015
+Contact:	Badhri Jagan Sridharan<badhri@google.com>
+Description:
+		Provide a generic interface to monitor and change
+		the state of dual role usb ports. The name here
+		refers to the name mentioned in the
+		dual_role_phy_desc that is passed while registering
+		the dual_role_phy_intstance through
+		devm_dual_role_instance_register.
+
+What:           /sys/class/dual_role_usb/.../supported_modes
+Date:           June 2015
+Contact:        Badhri Jagan Sridharan<badhri@google.com>
+Description:
+		This is a static node, once initialized this
+		is not expected to change during runtime. "dfp"
+		refers to "downstream facing port" i.e. port can
+		only act as host. "ufp" refers to "upstream
+		facing port" i.e. port can only act as device.
+		"dfp ufp" refers to "dual role port" i.e. the port
+		can either be a host port or a device port.
+
+What:		/sys/class/dual_role_usb/.../mode
+Date:		June 2015
+Contact:	Badhri Jagan Sridharan<badhri@google.com>
+Description:
+		The mode node refers to the current mode in which the
+		port is operating. "dfp" for host ports. "ufp" for device
+		ports and "none" when cable is not connected.
+
+		On devices where the USB mode is software-controllable,
+		userspace can change the mode by writing "dfp" or "ufp".
+		On devices where the USB mode is fixed in hardware,
+		this attribute is read-only.
+
+What:		/sys/class/dual_role_usb/.../power_role
+Date:		June 2015
+Contact:	Badhri Jagan Sridharan<badhri@google.com>
+Description:
+		The power_role node mentions whether the port
+		is "sink"ing or "source"ing power. "none" if
+		they are not connected.
+
+		On devices implementing USB Power Delivery,
+		userspace can control the power role by writing "sink" or
+		"source". On devices without USB-PD, this attribute is
+		read-only.
+
+What:		/sys/class/dual_role_usb/.../data_role
+Date:		June 2015
+Contact:	Badhri Jagan Sridharan<badhri@google.com>
+Description:
+		The data_role node mentions whether the port
+		is acting as "host" or "device" for USB data connection.
+		"none" if there is no active data link.
+
+		On devices implementing USB Power Delivery, userspace
+		can control the data role by writing "host" or "device".
+		On devices without USB-PD, this attribute is read-only
+
+What:		/sys/class/dual_role_usb/.../powers_vconn
+Date:		June 2015
+Contact:	Badhri Jagan Sridharan<badhri@google.com>
+Description:
+		The powers_vconn node mentions whether the port
+		is supplying power for VCONN pin.
+
+		On devices with software control of VCONN,
+		userspace can disable the power supply to VCONN by writing "n",
+		or enable the power supply by writing "y".
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-extcon b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-extcon
new file mode 100644
index 0000000..57a7262
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-extcon
@@ -0,0 +1,97 @@
+What:		/sys/class/extcon/.../
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		Provide a place in sysfs for the extcon objects.
+		This allows accessing extcon specific variables.
+		The name of extcon object denoted as ... is the name given
+		with extcon_dev_register.
+
+		One extcon device denotes a single external connector
+		port. An external connector may have multiple cables
+		attached simultaneously. Many of docks, cradles, and
+		accessory cables have such capability. For example,
+		the 30-pin port of Nuri board (/arch/arm/mach-exynos)
+		may have both HDMI and Charger attached, or analog audio,
+		video, and USB cables attached simultaneously.
+
+		If there are cables mutually exclusive with each other,
+		such binary relations may be expressed with extcon_dev's
+		mutually_exclusive array.
+
+What:		/sys/class/extcon/.../name
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../name shows the name of the extcon
+		object. If the extcon object has an optional callback
+		"show_name" defined, the callback will provide the name with
+		this sysfs node.
+
+What:		/sys/class/extcon/.../state
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../state shows and stores the cable
+		attach/detach information of the corresponding extcon object.
+		If the extcon object has an optional callback "show_state"
+		defined, the showing function is overridden with the optional
+		callback.
+
+		If the default callback for showing function is used, the
+		format is like this:
+		# cat state
+		USB_OTG=1
+		HDMI=0
+		TA=1
+		EAR_JACK=0
+		#
+		In this example, the extcon device has USB_OTG and TA
+		cables attached and HDMI and EAR_JACK cables detached.
+
+		In order to update the state of an extcon device, enter a hex
+		state number starting with 0x:
+		# echo 0xHEX > state
+
+		This updates the whole state of the extcon device.
+		Inputs of all the methods are required to meet the
+		mutually_exclusive conditions if they exist.
+
+		It is recommended to use this "global" state interface if
+		you need to set the value atomically. The later state
+		interface associated with each cable cannot update
+		multiple cable states of an extcon device simultaneously.
+
+What:		/sys/class/extcon/.../cable.x/name
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../cable.x/name shows the name of cable
+		"x" (integer between 0 and 31) of an extcon device.
+
+What:		/sys/class/extcon/.../cable.x/state
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../cable.x/state shows and stores the
+		state of cable "x" (integer between 0 and 31) of an extcon
+		device. The state value is either 0 (detached) or 1
+		(attached).
+
+What:		/sys/class/extcon/.../mutually_exclusive/...
+Date:		December 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		Shows the relations of mutually exclusiveness. For example,
+		if the mutually_exclusive array of extcon device is
+		{0x3, 0x5, 0xC, 0x0}, then the output is:
+		# ls mutually_exclusive/
+		0x3
+		0x5
+		0xc
+		#
+
+		Note that mutually_exclusive is a sub-directory of the extcon
+		device and the file names under the mutually_exclusive
+		directory show the mutually-exclusive sets, not the contents
+		of the files.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-fpga-bridge b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-fpga-bridge
new file mode 100644
index 0000000..312ae2c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-fpga-bridge
@@ -0,0 +1,11 @@
+What:		/sys/class/fpga_bridge/<bridge>/name
+Date:		January 2016
+KernelVersion:	4.5
+Contact:	Alan Tull <atull@opensource.altera.com>
+Description:	Name of low level FPGA bridge driver.
+
+What:		/sys/class/fpga_bridge/<bridge>/state
+Date:		January 2016
+KernelVersion:	4.5
+Contact:	Alan Tull <atull@opensource.altera.com>
+Description:	Show bridge state as "enabled" or "disabled"
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-fpga-manager b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-fpga-manager
new file mode 100644
index 0000000..23056c5
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-fpga-manager
@@ -0,0 +1,37 @@
+What:		/sys/class/fpga_manager/<fpga>/name
+Date:		August 2015
+KernelVersion:	4.3
+Contact:	Alan Tull <atull@opensource.altera.com>
+Description:	Name of low level fpga manager driver.
+
+What:		/sys/class/fpga_manager/<fpga>/state
+Date:		August 2015
+KernelVersion:	4.3
+Contact:	Alan Tull <atull@opensource.altera.com>
+Description:	Read fpga manager state as a string.
+		The intent is to provide enough detail that if something goes
+		wrong during FPGA programming (something that the driver can't
+		fix) then userspace can know, i.e. if the firmware request
+		fails, that could be due to not being able to find the firmware
+		file.
+
+		This is a superset of FPGA states and fpga manager driver
+		states.  The fpga manager driver is walking through these steps
+		to get the FPGA into a known operating state.  It's a sequence,
+		though some steps may get skipped.  Valid FPGA states will vary
+		by manufacturer; this is a superset.
+
+		* unknown		= can't determine state
+		* power off		= FPGA power is off
+		* power up		= FPGA reports power is up
+		* reset			= FPGA held in reset state
+		* firmware request	= firmware class request in progress
+		* firmware request error = firmware request failed
+		* write init		= preparing FPGA for programming
+		* write init error	= Error while preparing FPGA for
+					  programming
+		* write			= FPGA ready to receive image data
+		* write error		= Error while programming
+		* write complete	= Doing post programming steps
+		* write complete error	= Error while doing post programming
+		* operating		= FPGA is programmed and operating
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-infiniband b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-infiniband
new file mode 100644
index 0000000..a86abe6
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-infiniband
@@ -0,0 +1,16 @@
+What:		/sys/class/infiniband/<hca>/ports/<port-number>/gid_attrs/ndevs/<gid-index>
+Date:		November 29, 2015
+KernelVersion:	4.4.0
+Contact:	linux-rdma@vger.kernel.org
+Description: 	The net-device's name associated with the GID resides
+		at index <gid-index>.
+
+What:		/sys/class/infiniband/<hca>/ports/<port-number>/gid_attrs/types/<gid-index>
+Date:		November 29, 2015
+KernelVersion:	4.4.0
+Contact:	linux-rdma@vger.kernel.org
+Description: 	The RoCE type of the associated GID resides at index <gid-index>.
+		This could either be "IB/RoCE v1" for IB and RoCE v1 based GODs
+		or "RoCE v2" for RoCE v2 based GIDs.
+
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-iommu b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-iommu
new file mode 100644
index 0000000..6d0a1b4
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-iommu
@@ -0,0 +1,17 @@
+What:		/sys/class/iommu/<iommu>/devices/
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		IOMMU drivers are able to link devices managed by a
+		given IOMMU here to allow association of IOMMU to
+		device.
+
+What:		/sys/devices/.../iommu
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		IOMMU drivers are able to link the IOMMU for a
+		given device here to allow association of device to
+		IOMMU.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-iommu-amd-iommu b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-iommu-amd-iommu
new file mode 100644
index 0000000..d6ba8e8
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-iommu-amd-iommu
@@ -0,0 +1,14 @@
+What:		/sys/class/iommu/<iommu>/amd-iommu/cap
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		IOMMU capability header as documented in the AMD IOMMU
+		specification.  Format: %x
+
+What:		/sys/class/iommu/<iommu>/amd-iommu/features
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		Extended features of the IOMMU.  Format: %llx
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-iommu-intel-iommu b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-iommu-intel-iommu
new file mode 100644
index 0000000..258cc24
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-iommu-intel-iommu
@@ -0,0 +1,32 @@
+What:		/sys/class/iommu/<iommu>/intel-iommu/address
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		Physical address of the VT-d DRHD for this IOMMU.
+		Format: %llx.  This allows association of a sysfs
+		intel-iommu with a DMAR DRHD table entry.
+
+What:		/sys/class/iommu/<iommu>/intel-iommu/cap
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		The cached hardware capability register value
+		of this DRHD unit.  Format: %llx.
+
+What:		/sys/class/iommu/<iommu>/intel-iommu/ecap
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		The cached hardware extended capability register
+		value of this DRHD unit.  Format: %llx.
+
+What:		/sys/class/iommu/<iommu>/intel-iommu/version
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		The architecture version as reported from the
+		VT-d VER_REG.  Format: %d:%d, major:minor
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-lcd b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-lcd
new file mode 100644
index 0000000..35906bf
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-lcd
@@ -0,0 +1,23 @@
+What:		/sys/class/lcd/<lcd>/lcd_power
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Control LCD power, values are FB_BLANK_* from fb.h
+		 - FB_BLANK_UNBLANK (0)   : power on.
+		 - FB_BLANK_POWERDOWN (4) : power off
+
+What:		/sys/class/lcd/<lcd>/contrast
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Current contrast of this LCD device. Value is between 0 and
+		/sys/class/lcd/<lcd>/max_contrast.
+
+What:		/sys/class/lcd/<lcd>/max_contrast
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Maximum contrast for this LCD device.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-led b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-led
new file mode 100644
index 0000000..5f67f7a
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-led
@@ -0,0 +1,63 @@
+What:		/sys/class/leds/<led>/brightness
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Set the brightness of the LED. Most LEDs don't
+		have hardware brightness support, so will just be turned on for
+		non-zero brightness settings. The value is between 0 and
+		/sys/class/leds/<led>/max_brightness.
+
+		Writing 0 to this file clears active trigger.
+
+		Writing non-zero to this file while trigger is active changes the
+		top brightness trigger is going to use.
+
+What:		/sys/class/leds/<led>/max_brightness
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Maximum brightness level for this LED, default is 255 (LED_FULL).
+
+		If the LED does not support different brightness levels, this
+		should be 1.
+
+What:		/sys/class/leds/<led>/brightness_hw_changed
+Date:		January 2017
+KernelVersion:	4.11
+Description:
+		Last hardware set brightness level for this LED. Some LEDs
+		may be changed autonomously by hardware/firmware. Only LEDs
+		where this happens and the driver can detect this, will have
+		this file.
+
+		This file supports poll() to detect when the hardware changes
+		the brightness.
+
+		Reading this file will return the last brightness level set
+		by the hardware, this may be different from the current
+		brightness. Reading this file when no hw brightness change
+		event has happened will return an ENODATA error.
+
+What:		/sys/class/leds/<led>/trigger
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Set the trigger for this LED. A trigger is a kernel based source
+		of LED events.
+		You can change triggers in a similar manner to the way an IO
+		scheduler is chosen. Trigger specific parameters can appear in
+		/sys/class/leds/<led> once a given trigger is selected. For
+		their documentation see sysfs-class-led-trigger-*.
+
+What:		/sys/class/leds/<led>/inverted
+Date:		January 2011
+KernelVersion:	2.6.38
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Invert the LED on/off state. This parameter is specific to
+		gpio and backlight triggers. In case of the backlight trigger,
+		it is useful when driving a LED which is intended to indicate
+		a device in a standby like state.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-led-driver-lm3533
new file mode 100644
index 0000000..620ebb3
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-led-driver-lm3533
@@ -0,0 +1,65 @@
+What:		/sys/class/leds/<led>/als_channel
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the ALS output channel to use as input in
+		ALS-current-control mode (1, 2), where
+
+		1 - out_current1
+		2 - out_current2
+
+What:		/sys/class/leds/<led>/als_en
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Enable ALS-current-control mode (0, 1).
+
+What:		/sys/class/leds/<led>/falltime
+What:		/sys/class/leds/<led>/risetime
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the pattern generator fall and rise times (0..7), where
+
+		0 - 2048 us
+		1 - 262 ms
+		2 - 524 ms
+		3 - 1.049 s
+		4 - 2.097 s
+		5 - 4.194 s
+		6 - 8.389 s
+		7 - 16.78 s
+
+What:		/sys/class/leds/<led>/id
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get the id of this led (0..3).
+
+What:		/sys/class/leds/<led>/linear
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the brightness-mapping mode (0, 1), where
+
+		0 - exponential mode
+		1 - linear mode
+
+What:		/sys/class/leds/<led>/pwm
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the PWM-input control mask (5 bits), where
+
+		bit 5 - PWM-input enabled in Zone 4
+		bit 4 - PWM-input enabled in Zone 3
+		bit 3 - PWM-input enabled in Zone 2
+		bit 2 - PWM-input enabled in Zone 1
+		bit 1 - PWM-input enabled in Zone 0
+		bit 0 - PWM-input enabled
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-led-flash b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-led-flash
new file mode 100644
index 0000000..220a027
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-led-flash
@@ -0,0 +1,80 @@
+What:		/sys/class/leds/<led>/flash_brightness
+Date:		March 2015
+KernelVersion:	4.0
+Contact:	Jacek Anaszewski <j.anaszewski@samsung.com>
+Description:	read/write
+		Set the brightness of this LED in the flash strobe mode, in
+		microamperes. The file is created only for the flash LED devices
+		that support setting flash brightness.
+
+		The value is between 0 and
+		/sys/class/leds/<led>/max_flash_brightness.
+
+What:		/sys/class/leds/<led>/max_flash_brightness
+Date:		March 2015
+KernelVersion:	4.0
+Contact:	Jacek Anaszewski <j.anaszewski@samsung.com>
+Description:	read only
+		Maximum brightness level for this LED in the flash strobe mode,
+		in microamperes.
+
+What:		/sys/class/leds/<led>/flash_timeout
+Date:		March 2015
+KernelVersion:	4.0
+Contact:	Jacek Anaszewski <j.anaszewski@samsung.com>
+Description:	read/write
+		Hardware timeout for flash, in microseconds. The flash strobe
+		is stopped after this period of time has passed from the start
+		of the strobe. The file is created only for the flash LED
+		devices that support setting flash timeout.
+
+What:		/sys/class/leds/<led>/max_flash_timeout
+Date:		March 2015
+KernelVersion:	4.0
+Contact:	Jacek Anaszewski <j.anaszewski@samsung.com>
+Description:	read only
+		Maximum flash timeout for this LED, in microseconds.
+
+What:		/sys/class/leds/<led>/flash_strobe
+Date:		March 2015
+KernelVersion:	4.0
+Contact:	Jacek Anaszewski <j.anaszewski@samsung.com>
+Description:	read/write
+		Flash strobe state. When written with 1 it triggers flash strobe
+		and when written with 0 it turns the flash off.
+
+		On read 1 means that flash is currently strobing and 0 means
+		that flash is off.
+
+What:		/sys/class/leds/<led>/flash_fault
+Date:		March 2015
+KernelVersion:	4.0
+Contact:	Jacek Anaszewski <j.anaszewski@samsung.com>
+Description:	read only
+		Space separated list of flash faults that may have occurred.
+		Flash faults are re-read after strobing the flash. Possible
+		flash faults:
+
+		* led-over-voltage - flash controller voltage to the flash LED
+			has exceeded the limit specific to the flash controller
+		* flash-timeout-exceeded - the flash strobe was still on when
+			the timeout set by the user has expired; not all flash
+			controllers may set this in all such conditions
+		* controller-over-temperature - the flash controller has
+			overheated
+		* controller-short-circuit - the short circuit protection
+			of the flash controller has been triggered
+		* led-power-supply-over-current - current in the LED power
+			supply has exceeded the limit specific to the flash
+			controller
+		* indicator-led-fault - the flash controller has detected
+			a short or open circuit condition on the indicator LED
+		* led-under-voltage - flash controller voltage to the flash
+			LED has been below the minimum limit specific to
+			the flash
+		* controller-under-voltage - the input voltage of the flash
+			controller is below the limit under which strobing the
+			flash at full current will not be possible;
+			the condition persists until this flag is no longer set
+		* led-over-temperature - the temperature of the LED has exceeded
+			its allowed upper limit
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-led-trigger-oneshot b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-led-trigger-oneshot
new file mode 100644
index 0000000..378a3a4
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-led-trigger-oneshot
@@ -0,0 +1,36 @@
+What:		/sys/class/leds/<led>/delay_on
+Date:		Jun 2012
+KernelVersion:	3.6
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Specifies for how many milliseconds the LED has to stay at
+		LED_FULL brightness after it has been armed.
+		Defaults to 100 ms.
+
+What:		/sys/class/leds/<led>/delay_off
+Date:		Jun 2012
+KernelVersion:	3.6
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Specifies for how many milliseconds the LED has to stay at
+		LED_OFF brightness after it has been armed.
+		Defaults to 100 ms.
+
+What:		/sys/class/leds/<led>/invert
+Date:		Jun 2012
+KernelVersion:	3.6
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Reverse the blink logic. If set to 0 (default) blink on for
+		delay_on ms, then blink off for delay_off ms, leaving the LED
+		normally off. If set to 1, blink off for delay_off ms, then
+		blink on for delay_on ms, leaving the LED normally on.
+		Setting this value also immediately changes the LED state.
+
+What:		/sys/class/leds/<led>/shot
+Date:		Jun 2012
+KernelVersion:	3.6
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Write any non-empty string to signal an events, this starts a
+		blink sequence if not already running.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-led-trigger-usbport b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-led-trigger-usbport
new file mode 100644
index 0000000..f440e69
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-led-trigger-usbport
@@ -0,0 +1,12 @@
+What:		/sys/class/leds/<led>/ports/<port>
+Date:		September 2016
+KernelVersion:	4.9
+Contact:	linux-leds@vger.kernel.org
+		linux-usb@vger.kernel.org
+Description:
+		Every dir entry represents a single USB port that can be
+		selected for the USB port trigger. Selecting ports makes trigger
+		observing them for any connected devices and lighting on LED if
+		there are any.
+		Echoing "1" value selects USB port. Echoing "0" unselects it.
+		Current state can be also read.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-leds-gt683r b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-leds-gt683r
new file mode 100644
index 0000000..e4fae60
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-leds-gt683r
@@ -0,0 +1,16 @@
+What:		/sys/class/leds/<led>/gt683r/mode
+Date:		Jun 2014
+KernelVersion:	3.17
+Contact:	Janne Kanniainen <janne.kanniainen@gmail.com>
+Description:
+		Set the mode of LEDs. You should notice that changing the mode
+		of one LED will update the mode of its two sibling devices as
+		well.
+
+		0 - normal
+		1 - audio
+		2 - breathing
+
+		Normal: LEDs are fully on when enabled
+		Audio:  LEDs brightness depends on sound level
+		Breathing: LEDs brightness varies at human breathing rate
\ No newline at end of file
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-mei b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-mei
new file mode 100644
index 0000000..5096a82
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-mei
@@ -0,0 +1,47 @@
+What:		/sys/class/mei/
+Date:		May 2014
+KernelVersion:	3.17
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:
+		The mei/ class sub-directory belongs to mei device class
+
+
+What:		/sys/class/mei/meiN/
+Date:		May 2014
+KernelVersion:	3.17
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:
+		The /sys/class/mei/meiN directory is created for
+		each probed mei device
+
+What:		/sys/class/mei/meiN/fw_status
+Date:		Nov 2014
+KernelVersion:	3.19
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:	Display fw status registers content
+
+		The ME FW writes its status information into fw status
+		registers for BIOS and OS to monitor fw health.
+
+		The register contains running state, power management
+		state, error codes, and others. The way the registers
+		are decoded depends on PCH or SoC generation.
+		Also number of registers varies between 1 and 6
+		depending on generation.
+
+What:		/sys/class/mei/meiN/hbm_ver
+Date:		Aug 2016
+KernelVersion:	4.9
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:	Display the negotiated HBM protocol version.
+
+		The HBM protocol version negotiated
+		between the driver and the device.
+
+What:		/sys/class/mei/meiN/hbm_ver_drv
+Date:		Aug 2016
+KernelVersion:	4.9
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:	Display the driver HBM protocol version.
+
+		The HBM protocol version supported by the driver.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-mic.txt b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-mic.txt
new file mode 100644
index 0000000..6ef6826
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-mic.txt
@@ -0,0 +1,166 @@
+What:		/sys/class/mic/
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		The mic class directory belongs to Intel MIC devices and
+		provides information per MIC device. An Intel MIC device is a
+		PCIe form factor add-in Coprocessor card based on the Intel Many
+		Integrated Core (MIC) architecture that runs a Linux OS.
+
+What:		/sys/class/mic/mic(x)
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		The directories /sys/class/mic/mic0, /sys/class/mic/mic1 etc.,
+		represent MIC devices (0,1,..etc). Each directory has
+		information specific to that MIC device.
+
+What:		/sys/class/mic/mic(x)/family
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		Provides information about the Coprocessor family for an Intel
+		MIC device. For example - "x100"
+
+What:		/sys/class/mic/mic(x)/stepping
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		Provides information about the silicon stepping for an Intel
+		MIC device. For example - "A0" or "B0"
+
+What:		/sys/class/mic/mic(x)/state
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		When read, this entry provides the current state of an Intel
+		MIC device in the context of the card OS. Possible values that
+		will be read are:
+		"ready" - The MIC device is ready to boot the card OS. On
+		reading this entry after an OSPM resume, a "boot" has to be
+		written to this entry if the card was previously shutdown
+		during OSPM suspend.
+		"booting" - The MIC device has initiated booting a card OS.
+		"online" - The MIC device has completed boot and is online
+		"shutting_down" - The card OS is shutting down.
+		"resetting" - A reset has been initiated for the MIC device
+		"reset_failed" - The MIC device has failed to reset.
+
+		When written, this sysfs entry triggers different state change
+		operations depending upon the current state of the card OS.
+		Acceptable values are:
+		"boot" - Boot the card OS image specified by the combination
+			 of firmware, ramdisk, cmdline and bootmode
+			sysfs entries.
+		"reset" - Initiates device reset.
+		"shutdown" - Initiates card OS shutdown.
+
+What:		/sys/class/mic/mic(x)/shutdown_status
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		An Intel MIC device runs a Linux OS during its operation. This
+		OS can shutdown because of various reasons. When read, this
+		entry provides the status on why the card OS was shutdown.
+		Possible values are:
+		"nop" -  shutdown status is not applicable, when the card OS is
+			"online"
+		"crashed" - Shutdown because of a HW or SW crash.
+		"halted" - Shutdown because of a halt command.
+		"poweroff" - Shutdown because of a poweroff command.
+		"restart" - Shutdown because of a restart command.
+
+What:		/sys/class/mic/mic(x)/cmdline
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		An Intel MIC device runs a Linux OS during its operation. Before
+		booting this card OS, it is possible to pass kernel command line
+		options to configure various features in it, similar to
+		self-bootable machines. When read, this entry provides
+		information about the current kernel command line options set to
+		boot the card OS. This entry can be written to change the
+		existing kernel command line options. Typically, the user would
+		want to read the current command line options, append new ones
+		or modify existing ones and then write the whole kernel command
+		line back to this entry.
+
+What:		/sys/class/mic/mic(x)/firmware
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		When read, this sysfs entry provides the path name under
+		/lib/firmware/ where the firmware image to be booted on the
+		card can be found. The entry can be written to change the
+		firmware image location under /lib/firmware/.
+
+What:		/sys/class/mic/mic(x)/ramdisk
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		When read, this sysfs entry provides the path name under
+		/lib/firmware/ where the ramdisk image to be used during card
+		OS boot can be found. The entry can be written to change
+		the ramdisk image location under /lib/firmware/.
+
+What:		/sys/class/mic/mic(x)/bootmode
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		When read, this sysfs entry provides the current bootmode for
+		the card. This sysfs entry can be written with the following
+		valid strings:
+		a) linux - Boot a Linux image.
+		b) flash - Boot an image for flash updates.
+
+What:		/sys/class/mic/mic(x)/log_buf_addr
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		An Intel MIC device runs a Linux OS during its operation. For
+		debugging purpose and early kernel boot messages, the user can
+		access the card OS log buffer via debugfs. When read, this entry
+		provides the kernel virtual address of the buffer where the card
+		OS log buffer can be read. This entry is written by the host
+		configuration daemon to set the log buffer address. The correct
+		log buffer address to be written can be found in the System.map
+		file of the card OS.
+
+What:		/sys/class/mic/mic(x)/log_buf_len
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		An Intel MIC device runs a Linux OS during its operation. For
+		debugging purpose and early kernel boot messages, the user can
+		access the card OS log buffer via debugfs. When read, this entry
+		provides the kernel virtual address where the card OS log buffer
+		length can be read. This entry is written by host configuration
+		daemon to set the log buffer length address. The correct log
+		buffer length address to be written can be found in the
+		System.map file of the card OS.
+
+What:		/sys/class/mic/mic(x)/heartbeat_enable
+Date:		March 2015
+KernelVersion:	4.4
+Contact:	Ashutosh Dixit <ashutosh.dixit@intel.com>
+Description:
+		The MIC drivers detect and inform user space about card crashes
+		via a heartbeat mechanism (see the description of
+		shutdown_status above). User space can turn off this
+		notification by setting heartbeat_enable to 0 and enable it by
+		setting this entry to 1. If this notification is disabled it is
+		the responsibility of user space to detect card crashes via
+		alternative means such as a network ping. This setting is
+		enabled by default.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-mtd b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-mtd
new file mode 100644
index 0000000..f34e592
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-mtd
@@ -0,0 +1,234 @@
+What:		/sys/class/mtd/
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The mtd/ class subdirectory belongs to the MTD subsystem
+		(MTD core).
+
+What:		/sys/class/mtd/mtdX/
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The /sys/class/mtd/mtd{0,1,2,3,...} directories correspond
+		to each /dev/mtdX character device.  These may represent
+		physical/simulated flash devices, partitions on a flash
+		device, or concatenated flash devices.
+
+What:		/sys/class/mtd/mtdXro/
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		These directories provide the corresponding read-only device
+		nodes for /sys/class/mtd/mtdX/ .
+
+What:		/sys/class/mtd/mtdX/dev
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Major and minor numbers of the character device corresponding
+		to this MTD device (in <major>:<minor> format).  This is the
+		read-write device so <minor> will be even.
+
+What:		/sys/class/mtd/mtdXro/dev
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Major and minor numbers of the character device corresponding
+		to the read-only variant of thie MTD device (in
+		<major>:<minor> format).  In this case <minor> will be odd.
+
+What:		/sys/class/mtd/mtdX/erasesize
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		"Major" erase size for the device.  If numeraseregions is
+		zero, this is the eraseblock size for the entire device.
+		Otherwise, the MEMGETREGIONCOUNT/MEMGETREGIONINFO ioctls
+		can be used to determine the actual eraseblock layout.
+
+What:		/sys/class/mtd/mtdX/flags
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		A hexadecimal value representing the device flags, ORed
+		together:
+
+		0x0400: MTD_WRITEABLE - device is writable
+		0x0800: MTD_BIT_WRITEABLE - single bits can be flipped
+		0x1000: MTD_NO_ERASE - no erase necessary
+		0x2000: MTD_POWERUP_LOCK - always locked after reset
+
+What:		/sys/class/mtd/mtdX/name
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		A human-readable ASCII name for the device or partition.
+		This will match the name in /proc/mtd .
+
+What:		/sys/class/mtd/mtdX/numeraseregions
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		For devices that have variable eraseblock sizes, this
+		provides the total number of erase regions.  Otherwise,
+		it will read back as zero.
+
+What:		/sys/class/mtd/mtdX/oobsize
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Number of OOB bytes per page.
+
+What:		/sys/class/mtd/mtdX/size
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Total size of the device/partition, in bytes.
+
+What:		/sys/class/mtd/mtdX/type
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		One of the following ASCII strings, representing the device
+		type:
+
+		absent, ram, rom, nor, nand, mlc-nand, dataflash, ubi, unknown
+
+What:		/sys/class/mtd/mtdX/writesize
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Minimal writable flash unit size.  This will always be
+		a positive integer.
+
+		In the case of NOR flash it is 1 (even though individual
+		bits can be cleared).
+
+		In the case of NAND flash it is one NAND page (or a
+		half page, or a quarter page).
+
+		In the case of ECC NOR, it is the ECC block size.
+
+What:		/sys/class/mtd/mtdX/ecc_strength
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Maximum number of bit errors that the device is capable of
+		correcting within each region covering an ECC step (see
+		ecc_step_size).  This will always be a non-negative integer.
+
+		In the case of devices lacking any ECC capability, it is 0.
+
+What:		/sys/class/mtd/mtdX/bitflip_threshold
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		This allows the user to examine and adjust the criteria by which
+		mtd returns -EUCLEAN from mtd_read() and mtd_read_oob().  If the
+		maximum number of bit errors that were corrected on any single
+		region comprising an ecc step (as reported by the driver) equals
+		or exceeds this value, -EUCLEAN is returned.  Otherwise, absent
+		an error, 0 is returned.  Higher layers (e.g., UBI) use this
+		return code as an indication that an erase block may be
+		degrading and should be scrutinized as a candidate for being
+		marked as bad.
+
+		The initial value may be specified by the flash device driver.
+		If not, then the default value is ecc_strength.
+
+		The introduction of this feature brings a subtle change to the
+		meaning of the -EUCLEAN return code.  Previously, it was
+		interpreted to mean simply "one or more bit errors were
+		corrected".  Its new interpretation can be phrased as "a
+		dangerously high number of bit errors were corrected on one or
+		more regions comprising an ecc step".  The precise definition of
+		"dangerously high" can be adjusted by the user with
+		bitflip_threshold.  Users are discouraged from doing this,
+		however, unless they know what they are doing and have intimate
+		knowledge of the properties of their device.  Broadly speaking,
+		bitflip_threshold should be low enough to detect genuine erase
+		block degradation, but high enough to avoid the consequences of
+		a persistent return value of -EUCLEAN on devices where sticky
+		bitflips occur.  Note that if bitflip_threshold exceeds
+		ecc_strength, -EUCLEAN is never returned by the read operations.
+		Conversely, if bitflip_threshold is zero, -EUCLEAN is always
+		returned, absent a hard error.
+
+		This is generally applicable only to NAND flash devices with ECC
+		capability.  It is ignored on devices lacking ECC capability;
+		i.e., devices for which ecc_strength is zero.
+
+What:		/sys/class/mtd/mtdX/ecc_step_size
+Date:		May 2013
+KernelVersion:	3.10
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The size of a single region covered by ECC, known as the ECC
+		step.  Devices may have several equally sized ECC steps within
+		each writesize region.
+
+		It will always be a non-negative integer.  In the case of
+		devices lacking any ECC capability, it is 0.
+
+What:		/sys/class/mtd/mtdX/ecc_failures
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The number of failures reported by this device's ECC. Typically,
+		these failures are associated with failed read operations.
+
+		It will always be a non-negative integer.  In the case of
+		devices lacking any ECC capability, it is 0.
+
+What:		/sys/class/mtd/mtdX/corrected_bits
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The number of bits that have been corrected by means of the
+		device's ECC.
+
+		It will always be a non-negative integer.  In the case of
+		devices lacking any ECC capability, it is 0.
+
+What:		/sys/class/mtd/mtdX/bad_blocks
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The number of blocks marked as bad, if any, in this partition.
+
+What:		/sys/class/mtd/mtdX/bbt_blocks
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The number of blocks that are marked as reserved, if any, in
+		this partition. These are typically used to store the in-flash
+		bad block table (BBT).
+
+What:		/sys/class/mtd/mtdX/offset
+Date:		March 2015
+KernelVersion:	4.1
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		For a partition, the offset of that partition from the start
+		of the parent (another partition or a flash device) in bytes.
+		This attribute is absent on flash devices, so it can be used
+		to distinguish them from partitions.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-mux b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-mux
new file mode 100644
index 0000000..8715f9c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-mux
@@ -0,0 +1,16 @@
+What:		/sys/class/mux/
+Date:		April 2017
+KernelVersion:	4.13
+Contact:	Peter Rosin <peda@axentia.se>
+Description:
+		The mux/ class sub-directory belongs to the Generic MUX
+		Framework and provides a sysfs interface for using MUX
+		controllers.
+
+What:		/sys/class/mux/muxchipN/
+Date:		April 2017
+KernelVersion:	4.13
+Contact:	Peter Rosin <peda@axentia.se>
+Description:
+		A /sys/class/mux/muxchipN directory is created for each
+		probed MUX chip where N is a simple enumeration.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net
new file mode 100644
index 0000000..6856da9
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net
@@ -0,0 +1,261 @@
+What:		/sys/class/net/<iface>/name_assign_type
+Date:		July 2014
+KernelVersion:	3.17
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the name assignment type. Possible values are:
+		1: enumerated by the kernel, possibly in an unpredictable way
+		2: predictably named by the kernel
+		3: named by userspace
+		4: renamed
+
+What:		/sys/class/net/<iface>/addr_assign_type
+Date:		July 2010
+KernelVersion:	3.2
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the address assignment type. Possible values are:
+		0: permanent address
+		1: randomly generated
+		2: stolen from another device
+		3: set using dev_set_mac_address
+
+What:		/sys/class/net/<iface>/addr_len
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the hardware address size in bytes.
+		Values vary based on the lower-level protocol used by the
+		interface (Ethernet, FDDI, ATM, IEEE 802.15.4...). See
+		include/uapi/linux/if_*.h for actual values.
+
+What:		/sys/class/net/<iface>/address
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Hardware address currently assigned to this interface.
+		Format is a string, e.g: 00:11:22:33:44:55 for an Ethernet MAC
+		address.
+
+What:		/sys/class/net/<bridge iface>/bridge/group_fwd_mask
+Date:		January 2012
+KernelVersion:	3.2
+Contact:	netdev@vger.kernel.org
+Description:
+		Bitmask to allow forwarding of link local frames with address
+		01-80-C2-00-00-0X on a bridge device. Only values that set bits
+		not matching BR_GROUPFWD_RESTRICTED in net/bridge/br_private.h
+		allowed.
+		Default value 0 does not forward any link local frames.
+
+		Restricted bits:
+		0: 01-80-C2-00-00-00 Bridge Group Address used for STP
+		1: 01-80-C2-00-00-01 (MAC Control) 802.3 used for MAC PAUSE
+		2: 01-80-C2-00-00-02 (Link Aggregation) 802.3ad
+
+		Any values not setting these bits can be used. Take special
+		care when forwarding control frames e.g. 802.1X-PAE or LLDP.
+
+What:		/sys/class/net/<iface>/broadcast
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Hardware broadcast address for this interface. Format is a
+		string, e.g: ff:ff:ff:ff:ff:ff for an Ethernet broadcast MAC
+		address.
+
+What:		/sys/class/net/<iface>/carrier
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the current physical link state of the interface.
+		Posssible values are:
+		0: physical link is down
+		1: physical link is up
+
+		Note: some special devices, e.g: bonding and team drivers will
+		allow this attribute to be written to force a link state for
+		operating correctly and designating another fallback interface.
+
+What:		/sys/class/net/<iface>/dev_id
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the device unique identifier. Format is an hexadecimal
+		value. This is used to disambiguate interfaces which might be
+		stacked (e.g: VLAN interfaces) but still have the same MAC
+		address as their parent device.
+
+What:		/sys/class/net/<iface>/dormant
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates whether the interface is in dormant state. Possible
+		values are:
+		0: interface is not dormant
+		1: interface is dormant
+
+		This attribute can be used by supplicant software to signal that
+		the device is not usable unless some supplicant-based
+		authentication is performed (e.g: 802.1x). 'link_mode' attribute
+		will also reflect the dormant state.
+
+What:		/sys/clas/net/<iface>/duplex
+Date:		October 2009
+KernelVersion:	2.6.33
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface latest or current duplex value. Possible
+		values are:
+		half: half duplex
+		full: full duplex
+
+		Note: This attribute is only valid for interfaces that implement
+		the ethtool get_settings method (mostly Ethernet).
+
+What:		/sys/class/net/<iface>/flags
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface flags as a bitmask in hexadecimal. See
+		include/uapi/linux/if.h for a list of all possible values and
+		the flags semantics.
+
+What:		/sys/class/net/<iface>/ifalias
+Date:		September 2008
+KernelVersion:	2.6.28
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates/stores an interface alias name as a string. This can
+		be used for system management purposes.
+
+What:		/sys/class/net/<iface>/ifindex
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the system-wide interface unique index identifier as a
+		decimal number. This attribute is used for mapping an interface
+		identifier to an interface name. It is used throughout the
+		networking stack for specifying the interface specific
+		requests/events.
+
+What:		/sys/class/net/<iface>/iflink
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the system-wide interface unique index identifier a
+		the interface is linked to. Format is decimal. This attribute is
+		used to resolve interfaces chaining, linking and stacking.
+		Physical interfaces have the same 'ifindex' and 'iflink' values.
+
+What:		/sys/class/net/<iface>/link_mode
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface link mode, as a decimal number. This
+		attribute should be used in conjunction with 'dormant' attribute
+		to determine the interface usability. Possible values:
+		0: default link mode
+		1: dormant link mode
+
+What:		/sys/class/net/<iface>/mtu
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface currently configured MTU value, in
+		bytes, and in decimal format. Specific values depends on the
+		lower-level interface protocol used. Ethernet devices will show
+		a 'mtu' attribute value of 1500 unless changed.
+
+What:		/sys/class/net/<iface>/netdev_group
+Date:		January 2011
+KernelVersion:	2.6.39
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface network device group, as a decimal
+		integer. Default value is 0 which corresponds to the initial
+		network devices group. The group can be changed to affect
+		routing decisions (see: net/ipv4/fib_rules and
+		net/ipv6/fib6_rules.c).
+
+What:		/sys/class/net/<iface>/operstate
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface RFC2863 operational state as a string.
+		Possible values are:
+		"unknown", "notpresent", "down", "lowerlayerdown", "testing",
+		"dormant", "up".
+
+What:		/sys/class/net/<iface>/phys_port_id
+Date:		July 2013
+KernelVersion:	3.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface unique physical port identifier within
+		the NIC, as a string.
+
+What:		/sys/class/net/<iface>/phys_port_name
+Date:		March 2015
+KernelVersion:	4.0
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface physical port name within the NIC,
+		as a string.
+
+What:		/sys/class/net/<iface>/speed
+Date:		October 2009
+KernelVersion:	2.6.33
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface latest or current speed value. Value is
+		an integer representing the link speed in Mbits/sec.
+
+		Note: this attribute is only valid for interfaces that implement
+		the ethtool get_settings method (mostly Ethernet ).
+
+What:		/sys/class/net/<iface>/tx_queue_len
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface transmit queue len in number of packets,
+		as an integer value. Value depend on the type of interface,
+		Ethernet network adapters have a default value of 1000 unless
+		configured otherwise
+
+What:		/sys/class/net/<iface>/type
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface protocol type as a decimal value. See
+		include/uapi/linux/if_arp.h for all possible values.
+
+What:		/sys/class/net/<iface>/phys_switch_id
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the unique physical switch identifier of a switch this
+		port belongs to, as a string.
+
+What:		/sys/class/net/<iface>/phydev
+Date:		May 2017
+KernelVersion:	4.13
+Contact:	netdev@vger.kernel.org
+Description:
+		Symbolic link to the PHY device this network device is attached
+		to.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-batman-adv b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-batman-adv
new file mode 100644
index 0000000..8981068
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-batman-adv
@@ -0,0 +1,30 @@
+
+What:           /sys/class/net/<iface>/batman-adv/elp_interval
+Date:           Feb 2014
+Contact:        Linus Lüssing <linus.luessing@web.de>
+Description:
+                Defines the interval in milliseconds in which batman
+                emits probing packets for neighbor sensing (ELP).
+
+What:           /sys/class/net/<iface>/batman-adv/iface_status
+Date:           May 2010
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
+Description:
+                Indicates the status of <iface> as it is seen by batman.
+
+What:           /sys/class/net/<iface>/batman-adv/mesh_iface
+Date:           May 2010
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
+Description:
+                The /sys/class/net/<iface>/batman-adv/mesh_iface file
+                displays the batman mesh interface this <iface>
+                currently is associated with.
+
+What:           /sys/class/net/<iface>/batman-adv/throughput_override
+Date:           Feb 2014
+Contact:        Antonio Quartulli <a@unstable.cc>
+description:
+                Defines the throughput value to be used by B.A.T.M.A.N. V
+                when estimating the link throughput using this interface.
+                If the value is set to 0 then batman-adv will try to
+                estimate the throughput by itself.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-cdc_ncm b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
new file mode 100644
index 0000000..f7be0e8
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
@@ -0,0 +1,168 @@
+What:		/sys/class/net/<iface>/cdc_ncm/min_tx_pkt
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		The driver will pad NCM Transfer Blocks (NTBs) longer
+		than this to tx_max, allowing the device to receive
+		tx_max sized frames with no terminating short
+		packet. NTBs shorter than this limit are transmitted
+		as-is, without any padding, and are terminated with a
+		short USB packet.
+
+		Padding to tx_max allows the driver to transmit NTBs
+		back-to-back without any interleaving short USB
+		packets.  This reduces the number of short packet
+		interrupts in the device, and represents a tradeoff
+		between USB bus bandwidth and device DMA optimization.
+
+		Set to 0 to pad all frames. Set greater than tx_max to
+		disable all padding.
+
+What:		/sys/class/net/<iface>/cdc_ncm/ndp_to_end
+Date:		Dec 2015
+KernelVersion:	4.5
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Boolean attribute showing the status of the "NDP to
+		end" quirk.  Defaults to 'N', except for devices
+		already known to need it enabled.
+
+		The "NDP to end" quirk makes the driver place the NDP
+		(the packet index table) after the payload.  The NCM
+		specification does not mandate this, but some devices
+		are known to be more restrictive. Write 'Y' to this
+		attribute for temporary testing of a suspect device
+		failing to work with the default driver settings.
+
+		A device entry should be added to the driver if this
+		quirk is found to be required.
+
+What:		/sys/class/net/<iface>/cdc_ncm/rx_max
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		The maximum NTB size for RX.  Cannot exceed the
+		maximum value supported by the device. Must allow at
+		least one max sized datagram plus headers.
+
+		The actual limits are device dependent.  See
+		dwNtbInMaxSize.
+
+		Note: Some devices will silently ignore changes to
+		this value, resulting in oversized NTBs and
+		corresponding framing errors.
+
+What:		/sys/class/net/<iface>/cdc_ncm/tx_max
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		The maximum NTB size for TX.  Cannot exceed the
+		maximum value supported by the device.  Must allow at
+		least one max sized datagram plus headers.
+
+		The actual limits are device dependent.  See
+		dwNtbOutMaxSize.
+
+What:		/sys/class/net/<iface>/cdc_ncm/tx_timer_usecs
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Datagram aggregation timeout in µs. The driver will
+		wait up to 3 times this timeout for more datagrams to
+		aggregate before transmitting an NTB frame.
+
+		Valid range: 5 to 4000000
+
+		Set to 0 to disable aggregation.
+
+The following read-only attributes all represent fields of the
+structure defined in section 6.2.1 "GetNtbParameters" of "Universal
+Serial Bus Communications Class Subclass Specifications for Network
+Control Model Devices" (CDC NCM), Revision 1.0 (Errata 1), November
+24, 2010 from USB Implementers Forum, Inc.  The descriptions are
+quoted from table 6-3 of CDC NCM: "NTB Parameter Structure".
+
+What:		/sys/class/net/<iface>/cdc_ncm/bmNtbFormatsSupported
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Bit 0: 16-bit NTB supported (set to 1)
+		Bit 1: 32-bit NTB supported
+		Bits 2 – 15: reserved (reset to zero; must be ignored by host)
+
+What:		/sys/class/net/<iface>/cdc_ncm/dwNtbInMaxSize
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		IN NTB Maximum Size in bytes
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpInDivisor
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Divisor used for IN NTB Datagram payload alignment
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpInPayloadRemainder
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Remainder used to align input datagram payload within
+		the NTB: (Payload Offset) mod (wNdpInDivisor) =
+		wNdpInPayloadRemainder
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpInAlignment
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		NDP alignment modulus for NTBs on the IN pipe. Shall
+		be a power of 2, and shall be at least 4.
+
+What:		/sys/class/net/<iface>/cdc_ncm/dwNtbOutMaxSize
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		OUT NTB Maximum Size
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpOutDivisor
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		OUT NTB Datagram alignment modulus
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpOutPayloadRemainder
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Remainder used to align output datagram payload
+		offsets within the NTB: Padding, shall be transmitted
+		as zero by function, and ignored by host.  (Payload
+		Offset) mod (wNdpOutDivisor) = wNdpOutPayloadRemainder
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpOutAlignment
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		NDP alignment modulus for use in NTBs on the OUT
+		pipe. Shall be a power of 2, and shall be at least 4.
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNtbOutMaxDatagrams
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Maximum number of datagrams that the host may pack
+		into a single OUT NTB. Zero means that the device
+		imposes no limit.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-grcan b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-grcan
new file mode 100644
index 0000000..f418c92
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-grcan
@@ -0,0 +1,35 @@
+
+What:		/sys/class/net/<iface>/grcan/enable0
+Date:		October 2012
+KernelVersion:	3.8
+Contact:	Andreas Larsson <andreas@gaisler.com>
+Description:
+		Hardware configuration of physical interface 0. This file reads
+		and writes the "Enable 0" bit of the configuration register.
+		Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP
+		core library documentation for details. The default value is 0
+		or set by the module parameter grcan.enable0 and can be read at
+		/sys/module/grcan/parameters/enable0.
+
+What:		/sys/class/net/<iface>/grcan/enable1
+Date:		October 2012
+KernelVersion:	3.8
+Contact:	Andreas Larsson <andreas@gaisler.com>
+Description:
+		Hardware configuration of physical interface 1. This file reads
+		and writes the "Enable 1" bit of the configuration register.
+		Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP
+		core library documentation for details. The default value is 0
+		or set by the module parameter grcan.enable1 and can be read at
+		/sys/module/grcan/parameters/enable1.
+
+What:		/sys/class/net/<iface>/grcan/select
+Date:		October 2012
+KernelVersion:	3.8
+Contact:	Andreas Larsson <andreas@gaisler.com>
+Description:
+		Configuration of which physical interface to be used. Possible
+		values: 0 or 1. See the GRCAN chapter of the GRLIB IP core
+		library documentation for details. The default value is 0 or is
+		set by the module parameter grcan.select and can be read at
+		/sys/module/grcan/parameters/select.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-janz-ican3 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-janz-ican3
new file mode 100644
index 0000000..fdbc03a
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-janz-ican3
@@ -0,0 +1,19 @@
+What:		/sys/class/net/<iface>/termination
+Date:		May 2010
+KernelVersion:	2.6.35
+Contact:	Ira W. Snyder <ira.snyder@gmail.com>
+Description:
+		Value representing the can bus termination
+
+		Default: 1 (termination active)
+		Reading: get actual termination state
+		Writing: set actual termination state (0=no termination, 1=termination active)
+
+What:		/sys/class/net/<iface>/fwinfo
+Date:		May 2015
+KernelVersion:	3.19
+Contact:	Andreas Gröger <andreas24groeger@gmail.com>
+Description:
+		Firmware stamp of ican3 module
+		Read-only: 32 byte string identification of the ICAN3 module
+		(known values: "JANZ-ICAN3 ICANOS 1.xx", "JANZ-ICAN3 CAL/CANopen 1.xx")
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-mesh b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-mesh
new file mode 100644
index 0000000..c2b956d
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-mesh
@@ -0,0 +1,108 @@
+
+What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
+Date:           May 2010
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
+Description:
+                Indicates whether the batman protocol messages of the
+                mesh <mesh_iface> shall be aggregated or not.
+
+What:           /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation
+Date:           May 2011
+Contact:        Antonio Quartulli <a@unstable.cc>
+Description:
+                Indicates whether the data traffic going from a
+                wireless client to another wireless client will be
+                silently dropped. <vlan_subdir> is empty when referring
+		to the untagged lan.
+
+What:           /sys/class/net/<mesh_iface>/mesh/bonding
+Date:           June 2010
+Contact:        Simon Wunderlich <sw@simonwunderlich.de>
+Description:
+                Indicates whether the data traffic going through the
+                mesh will be sent using multiple interfaces at the
+                same time (if available).
+
+What:           /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance
+Date:           November 2011
+Contact:        Simon Wunderlich <sw@simonwunderlich.de>
+Description:
+                Indicates whether the bridge loop avoidance feature
+                is enabled. This feature detects and avoids loops
+                between the mesh and devices bridged with the soft
+                interface <mesh_iface>.
+
+What:           /sys/class/net/<mesh_iface>/mesh/fragmentation
+Date:           October 2010
+Contact:        Andreas Langer <an.langer@gmx.de>
+Description:
+                Indicates whether the data traffic going through the
+                mesh will be fragmented or silently discarded if the
+                packet size exceeds the outgoing interface MTU.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
+Date:           October 2010
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
+Description:
+                Defines the bandwidth which is propagated by this
+                node if gw_mode was set to 'server'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_mode
+Date:           October 2010
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
+Description:
+                Defines the state of the gateway features. Can be
+                either 'off', 'client' or 'server'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_sel_class
+Date:           October 2010
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
+Description:
+                Defines the selection criteria this node will use
+                to choose a gateway if gw_mode was set to 'client'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/hop_penalty
+Date:           Oct 2010
+Contact:        Linus Lüssing <linus.luessing@web.de>
+Description:
+                Defines the penalty which will be applied to an
+                originator message's tq-field on every hop.
+
+What:		/sys/class/net/<mesh_iface>/mesh/isolation_mark
+Date:		Nov 2013
+Contact:	Antonio Quartulli <a@unstable.cc>
+Description:
+		Defines the isolation mark (and its bitmask) which
+		is used to classify clients as "isolated" by the
+		Extended Isolation feature.
+
+What:           /sys/class/net/<mesh_iface>/mesh/multicast_mode
+Date:           Feb 2014
+Contact:        Linus Lüssing <linus.luessing@web.de>
+Description:
+                Indicates whether multicast optimizations are enabled
+                or disabled. If set to zero then all nodes in the
+                mesh are going to use classic flooding for any
+                multicast packet with no optimizations.
+
+What:           /sys/class/net/<mesh_iface>/mesh/network_coding
+Date:           Nov 2012
+Contact:        Martin Hundeboll <martin@hundeboll.net>
+Description:
+                Controls whether Network Coding (using some magic
+                to send fewer wifi packets but still the same
+                content) is enabled or not.
+
+What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
+Date:           May 2010
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
+Description:
+                Defines the interval in milliseconds in which batman
+                sends its protocol messages.
+
+What:           /sys/class/net/<mesh_iface>/mesh/routing_algo
+Date:           Dec 2011
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
+Description:
+                Defines the routing procotol this mesh instance
+                uses to find the optimal paths through the mesh.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-phydev b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-phydev
new file mode 100644
index 0000000..6ebabfb
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-phydev
@@ -0,0 +1,36 @@
+What:		/sys/class/mdio_bus/<bus>/<device>/attached_dev
+Date:		May 2017
+KernelVersion:	4.13
+Contact:	netdev@vger.kernel.org
+Description:
+		Symbolic link to the network device this PHY device is
+		attached to.
+
+What:		/sys/class/mdio_bus/<bus>/<device>/phy_has_fixups
+Date:		February 2014
+KernelVersion:	3.15
+Contact:	netdev@vger.kernel.org
+Description:
+		Boolean value indicating whether the PHY device has
+		any fixups registered against it (phy_register_fixup)
+
+What:		/sys/class/mdio_bus/<bus>/<device>/phy_id
+Date:		November 2012
+KernelVersion:	3.8
+Contact:	netdev@vger.kernel.org
+Description:
+		32-bit hexadecimal value corresponding to the PHY device's OUI,
+		model and revision number.
+
+What:		/sys/class/mdio_bus/<bus>/<device>/phy_interface
+Date:		February 2014
+KernelVersion:	3.15
+Contact:	netdev@vger.kernel.org
+Description:
+		String value indicating the PHY interface, possible
+		values are:.
+		<empty> (not available), mii, gmii, sgmii, tbi, rev-mii,
+		rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
+		xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,
+		xaui, 10gbase-kr, unknown
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-qmi b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-qmi
new file mode 100644
index 0000000..c310db4
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-qmi
@@ -0,0 +1,50 @@
+What:		/sys/class/net/<iface>/qmi/raw_ip
+Date:		Dec 2015
+KernelVersion:	4.4
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Boolean.  Default: 'N'
+
+		Set this to 'Y' to change the network device link
+		framing from '802.3' to 'raw-ip'.
+
+		The netdev will change to reflect the link framing
+		mode.  The netdev is an ordinary ethernet device in
+		'802.3' mode, and the driver expects to exchange
+		frames with an ethernet header over the USB link. The
+		netdev is a headerless p-t-p device in 'raw-ip' mode,
+		and the driver expects to echange IPv4 or IPv6 packets
+		without any L2 header over the USB link.
+
+		Userspace is in full control of firmware configuration
+		through the delegation of the QMI protocol. Userspace
+		is responsible for coordination of driver and firmware
+		link framing mode, changing this setting to 'Y' if the
+		firmware is configured for 'raw-ip' mode.
+
+What:		/sys/class/net/<iface>/qmi/add_mux
+Date:		March 2017
+KernelVersion:	4.11
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Unsigned integer.
+
+		Write a number ranging from 1 to 254 to add a qmap mux
+		based network device, supported by recent Qualcomm based
+		modems.
+
+		The network device will be called qmimux.
+
+		Userspace is in charge of managing the qmux network device
+		activation and data stream setup on the modem side by
+		using the proper QMI protocol requests.
+
+What:		/sys/class/net/<iface>/qmi/del_mux
+Date:		March 2017
+KernelVersion:	4.11
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Unsigned integer.
+
+		Write a number ranging from 1 to 254 to delete a previously
+		created qmap mux based network device.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-queues b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-queues
new file mode 100644
index 0000000..0c0df91
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-queues
@@ -0,0 +1,87 @@
+What:		/sys/class/<iface>/queues/rx-<queue>/rps_cpus
+Date:		March 2010
+KernelVersion:	2.6.35
+Contact:	netdev@vger.kernel.org
+Description:
+		Mask of the CPU(s) currently enabled to participate into the
+		Receive Packet Steering packet processing flow for this
+		network device queue. Possible values depend on the number
+		of available CPU(s) in the system.
+
+What:		/sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
+Date:		April 2010
+KernelVersion:	2.6.35
+Contact:	netdev@vger.kernel.org
+Description:
+		Number of Receive Packet Steering flows being currently
+		processed by this particular network device receive queue.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/tx_timeout
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of transmit timeout events seen by this
+		network interface transmit queue.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/tx_maxrate
+Date:		March 2015
+KernelVersion:	4.1
+Contact:	netdev@vger.kernel.org
+Description:
+		A Mbps max-rate set for the queue, a value of zero means disabled,
+		default is disabled.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/xps_cpus
+Date:		November 2010
+KernelVersion:	2.6.38
+Contact:	netdev@vger.kernel.org
+Description:
+		Mask of the CPU(s) currently enabled to participate into the
+		Transmit Packet Steering packet processing flow for this
+		network device transmit queue. Possible vaules depend on the
+		number of available CPU(s) in the system.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the hold time in milliseconds to measure the slack
+		of this particular network device transmit queue.
+		Default value is 1000.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of bytes (objects) in flight on this
+		network device transmit queue.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the current limit of bytes allowed to be queued
+		on this network device transmit queue. This value is clamped
+		to be within the bounds defined by limit_max and limit_min.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the absolute maximum limit of bytes allowed to be
+		queued on this network device transmit queue. See
+		include/linux/dynamic_queue_limits.h for the default value.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the absolute minimum limit of bytes allowed to be
+		queued on this network device transmit queue. Default value is
+		0.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-statistics b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-statistics
new file mode 100644
index 0000000..397118d
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-net-statistics
@@ -0,0 +1,201 @@
+What:		/sys/class/<iface>/statistics/collisions
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of collisions seen by this network device.
+		This value might not be relevant with all MAC layers.
+
+What:		/sys/class/<iface>/statistics/multicast
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of multicast packets received by this
+		network device.
+
+What:		/sys/class/<iface>/statistics/rx_bytes
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of bytes received by this network device.
+		See the network driver for the exact meaning of when this
+		value is incremented.
+
+What:		/sys/class/<iface>/statistics/rx_compressed
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of compressed packets received by this
+		network device. This value might only be relevant for interfaces
+		that support packet compression (e.g: PPP).
+
+What:		/sys/class/<iface>/statistics/rx_crc_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets received with a CRC (FCS) error
+		by this network device. Note that the specific meaning might
+		depend on the MAC layer used by the interface.
+
+What:		/sys/class/<iface>/statistics/rx_dropped
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets received by the network device
+		but dropped, that are not forwarded to the upper layers for
+		packet processing. See the network driver for the exact
+		meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_fifo_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of receive FIFO errors seen by this
+		network device. See the network driver for the exact
+		meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_frame_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of received frames with error, such as
+		alignment errors. Note that the specific meaning depends on
+		on the MAC layer protocol used. See the network driver for
+		the exact meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_length_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of received error packet with a length
+		error, oversized or undersized. See the network driver for the
+		exact meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_missed_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of received packets that have been missed
+		due to lack of capacity in the receive side. See the network
+		driver for the exact meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_over_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of received packets that are oversized
+		compared to what the network device is configured to accept
+		(e.g: larger than MTU). See the network driver for the exact
+		meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_packets
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the total number of good packets received by this
+		network device.
+
+What:		/sys/class/<iface>/statistics/tx_aborted_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets that have been aborted
+		during transmission by a network device (e.g: because of
+		a medium collision). See the network driver for the exact
+		meaning of this value.
+
+What:		/sys/class/<iface>/statistics/tx_bytes
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of bytes transmitted by a network
+		device. See the network driver for the exact meaning of this
+		value, in particular whether this accounts for all successfully
+		transmitted packets or all packets that have been queued for
+		transmission.
+
+What:		/sys/class/<iface>/statistics/tx_carrier_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets that could not be transmitted
+		because of carrier errors (e.g: physical link down). See the
+		network driver for the exact meaning of this value.
+
+What:		/sys/class/<iface>/statistics/tx_compressed
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of transmitted compressed packets. Note
+		this might only be relevant for devices that support
+		compression (e.g: PPP).
+
+What:		/sys/class/<iface>/statistics/tx_dropped
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets dropped during transmission.
+		See the driver for the exact reasons as to why the packets were
+		dropped.
+
+What:		/sys/class/<iface>/statistics/tx_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets in error during transmission by
+		a network device. See the driver for the exact reasons as to
+		why the packets were dropped.
+
+What:		/sys/class/<iface>/statistics/tx_fifo_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets having caused a transmit
+		FIFO error. See the driver for the exact reasons as to why the
+		packets were dropped.
+
+What:		/sys/class/<iface>/statistics/tx_heartbeat_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets transmitted that have been
+		reported as heartbeat errors. See the driver for the exact
+		reasons as to why the packets were dropped.
+
+What:		/sys/class/<iface>/statistics/tx_packets
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets transmitted by a network
+		device. See the driver for whether this reports the number of all
+		attempted or successful transmissions.
+
+What:		/sys/class/<iface>/statistics/tx_window_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets not successfully transmitted
+		due to a window collision. The specific meaning depends on the
+		MAC layer used.  On Ethernet this is usually used to report
+		late collisions errors.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-pktcdvd b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-pktcdvd
new file mode 100644
index 0000000..b1c3f02
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-pktcdvd
@@ -0,0 +1,72 @@
+What:           /sys/class/pktcdvd/
+Date:           Oct. 2006
+KernelVersion:  2.6.20
+Contact:        Thomas Maier <balagi@justmail.de>
+Description:
+
+sysfs interface
+---------------
+
+The pktcdvd module (packet writing driver) creates
+these files in the sysfs:
+(<devid> is in format  major:minor )
+
+/sys/class/pktcdvd/
+    add            (0200)  Write a block device id (major:minor)
+                           to create a new pktcdvd device and map
+                           it to the block device.
+
+    remove         (0200)  Write the pktcdvd device id (major:minor)
+                           to it to remove the pktcdvd device.
+
+    device_map     (0444)  Shows the device mapping in format:
+                             pktcdvd[0-7] <pktdevid> <blkdevid>
+
+/sys/class/pktcdvd/pktcdvd[0-7]/
+    dev                   (0444) Device id
+    uevent                (0200) To send an uevent.
+
+/sys/class/pktcdvd/pktcdvd[0-7]/stat/
+    packets_started       (0444) Number of started packets.
+    packets_finished      (0444) Number of finished packets.
+
+    kb_written            (0444) kBytes written.
+    kb_read               (0444) kBytes read.
+    kb_read_gather        (0444) kBytes read to fill write packets.
+
+    reset                 (0200) Write any value to it to reset
+                                 pktcdvd device statistic values, like
+                                 bytes read/written.
+
+/sys/class/pktcdvd/pktcdvd[0-7]/write_queue/
+    size                  (0444) Contains the size of the bio write
+                                 queue.
+
+    congestion_off        (0644) If bio write queue size is below
+                                 this mark, accept new bio requests
+                                 from the block layer.
+
+    congestion_on         (0644) If bio write queue size is higher
+                                 as this mark, do no longer accept
+                                 bio write requests from the block
+                                 layer and wait till the pktcdvd
+                                 device has processed enough bio's
+                                 so that bio write queue size is
+                                 below congestion off mark.
+                                 A value of <= 0 disables congestion
+                                 control.
+
+
+Example:
+--------
+To use the pktcdvd sysfs interface directly, you can do:
+
+# create a new pktcdvd device mapped to /dev/hdc
+echo "22:0" >/sys/class/pktcdvd/add
+cat /sys/class/pktcdvd/device_map
+# assuming device pktcdvd0 was created, look at stat's
+cat /sys/class/pktcdvd/pktcdvd0/stat/kb_written
+# print the device id of the mapped block device
+fgrep pktcdvd0 /sys/class/pktcdvd/device_map
+# remove device, using pktcdvd0 device id   253:0
+echo "253:0" >/sys/class/pktcdvd/remove
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-power b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-power
new file mode 100644
index 0000000..f85ce9e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-power
@@ -0,0 +1,134 @@
+What:		/sys/class/power/ds2760-battery.*/charge_now
+Date:		May 2010
+KernelVersion:	2.6.35
+Contact:	Daniel Mack <daniel@caiaq.de>
+Description:
+		This file is writeable and can be used to set the current
+		coloumb counter value inside the battery monitor chip. This
+		is needed for unavoidable corrections of aging batteries.
+		A userspace daemon can monitor the battery charging logic
+		and once the counter drops out of considerable bounds, take
+		appropriate action.
+
+What:		/sys/class/power/ds2760-battery.*/charge_full
+Date:		May 2010
+KernelVersion:	2.6.35
+Contact:	Daniel Mack <daniel@caiaq.de>
+Description:
+		This file is writeable and can be used to set the assumed
+		battery 'full level'. As batteries age, this value has to be
+		amended over time.
+
+What:		/sys/class/power_supply/max14577-charger/device/fast_charge_timer
+Date:		October 2014
+KernelVersion:	3.18.0
+Contact:	Krzysztof Kozlowski <krzk@kernel.org>
+Description:
+		This entry shows and sets the maximum time the max14577
+		charger operates in fast-charge mode. When the timer expires
+		the device will terminate fast-charge mode (charging current
+		will drop to 0 A) and will trigger interrupt.
+
+		Valid values:
+		- 5, 6 or 7 (hours),
+		- 0: disabled.
+
+What:		/sys/class/power_supply/max77693-charger/device/fast_charge_timer
+Date:		January 2015
+KernelVersion:	3.19.0
+Contact:	Krzysztof Kozlowski <krzk@kernel.org>
+Description:
+		This entry shows and sets the maximum time the max77693
+		charger operates in fast-charge mode. When the timer expires
+		the device will terminate fast-charge mode (charging current
+		will drop to 0 A) and will trigger interrupt.
+
+		Valid values:
+		- 4 - 16 (hours), step by 2 (rounded down)
+		- 0: disabled.
+
+What:		/sys/class/power_supply/max77693-charger/device/top_off_threshold_current
+Date:		January 2015
+KernelVersion:	3.19.0
+Contact:	Krzysztof Kozlowski <krzk@kernel.org>
+Description:
+		This entry shows and sets the charging current threshold for
+		entering top-off charging mode. When charging current in fast
+		charge mode drops below this value, the charger will trigger
+		interrupt and start top-off charging mode.
+
+		Valid values:
+		- 100000 - 200000 (microamps), step by 25000 (rounded down)
+		- 200000 - 350000 (microamps), step by 50000 (rounded down)
+		- 0: disabled.
+
+What:		/sys/class/power_supply/max77693-charger/device/top_off_timer
+Date:		January 2015
+KernelVersion:	3.19.0
+Contact:	Krzysztof Kozlowski <krzk@kernel.org>
+Description:
+		This entry shows and sets the maximum time the max77693
+		charger operates in top-off charge mode. When the timer expires
+		the device will terminate top-off charge mode (charging current
+		will drop to 0 A) and will trigger interrupt.
+
+		Valid values:
+		- 0 - 70 (minutes), step by 10 (rounded down)
+
+What:		/sys/class/power_supply/bq24257-charger/ovp_voltage
+Date:		October 2015
+KernelVersion:	4.4.0
+Contact:	Andreas Dannenberg <dannenberg@ti.com>
+Description:
+		This entry configures the overvoltage protection feature of bq24257-
+		type charger devices. This feature protects the device and other
+		components against damage from overvoltage on the input supply. See
+		device datasheet for details.
+
+		Valid values:
+		- 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000,
+		  10500000 (all uV)
+
+What:		/sys/class/power_supply/bq24257-charger/in_dpm_voltage
+Date:		October 2015
+KernelVersion:	4.4.0
+Contact:	Andreas Dannenberg <dannenberg@ti.com>
+Description:
+		This entry configures the input dynamic power path management voltage of
+		bq24257-type charger devices. Once the supply drops to the configured
+		voltage, the input current limit is reduced down to prevent the further
+		drop of the supply. When the IC enters this mode, the charge current is
+		lower than the set value. See device datasheet for details.
+
+		Valid values:
+		- 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000,
+		  4760000 (all uV)
+
+What:		/sys/class/power_supply/bq24257-charger/high_impedance_enable
+Date:		October 2015
+KernelVersion:	4.4.0
+Contact:	Andreas Dannenberg <dannenberg@ti.com>
+Description:
+		This entry allows enabling the high-impedance mode of bq24257-type
+		charger devices. If enabled, it places the charger IC into low power
+		standby mode with the switch mode controller disabled. When disabled,
+		the charger operates normally. See device datasheet for details.
+
+		Valid values:
+		- 1: enabled
+		- 0: disabled
+
+What:		/sys/class/power_supply/bq24257-charger/sysoff_enable
+Date:		October 2015
+KernelVersion:	4.4.0
+Contact:	Andreas Dannenberg <dannenberg@ti.com>
+Description:
+		This entry allows enabling the sysoff mode of bq24257-type charger
+		devices. If enabled and the input is removed, the internal battery FET
+		is turned off in order to reduce the leakage from the BAT pin to less
+		than 1uA. Note that on some devices/systems this disconnects the battery
+		from the system. See device datasheet for details.
+
+		Valid values:
+		- 1: enabled
+		- 0: disabled
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-power-twl4030 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-power-twl4030
new file mode 100644
index 0000000..b4fd32d
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-power-twl4030
@@ -0,0 +1,28 @@
+What: /sys/class/power_supply/twl4030_usb/mode
+Description:
+	Changing mode for USB port.
+	Writing to this can disable charging.
+
+	Possible values are:
+		"auto" - draw power as appropriate for detected
+			 power source and battery status.
+		"off"  - do not draw any power.
+		"continuous"
+		       - activate mode described as "linear" in
+		         TWL data sheets.  This uses whatever
+			 current is available and doesn't switch off
+			 when voltage drops.
+
+			 This is useful for unstable power sources
+			 such as bicycle dynamo, but care should
+			 be taken that battery is not over-charged.
+
+What: /sys/class/power_supply/twl4030_ac/mode
+Description:
+	Changing mode for 'ac' port.
+	Writing to this can disable charging.
+
+	Possible values are:
+		"auto" - draw power as appropriate for detected
+			 power source and battery status.
+		"off"  - do not draw any power.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-powercap b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-powercap
new file mode 100644
index 0000000..db3b3ff
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-powercap
@@ -0,0 +1,152 @@
+What:		/sys/class/powercap/
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		The powercap/ class sub directory belongs to the power cap
+		subsystem. Refer to
+		Documentation/power/powercap/powercap.txt for details.
+
+What:		/sys/class/powercap/<control type>
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		A <control type> is a unique name under /sys/class/powercap.
+		Here <control type> determines how the power is going to be
+		controlled. A <control type> can contain multiple power zones.
+
+What:		/sys/class/powercap/<control type>/enabled
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		This allows to enable/disable power capping for a "control type".
+		This status affects every power zone using this "control_type.
+
+What:		/sys/class/powercap/<control type>/<power zone>
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		A power zone is a single or a collection of devices, which can
+		be independently monitored and controlled. A power zone sysfs
+		entry is qualified with the name of the <control type>.
+		E.g. intel-rapl:0:1:1.
+
+What:		/sys/class/powercap/<control type>/<power zone>/<child power zone>
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Power zones may be organized in a hierarchy in which child
+		power zones provide monitoring and control for a subset of
+		devices under the parent. For example, if there is a parent
+		power zone for a whole CPU package, each CPU core in it can
+		be a child power zone.
+
+What:		/sys/class/powercap/.../<power zone>/name
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Specifies the name of this power zone.
+
+What:		/sys/class/powercap/.../<power zone>/energy_uj
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Current energy counter in micro-joules. Write "0" to reset.
+		If the counter can not be reset, then this attribute is
+		read-only.
+
+What:		/sys/class/powercap/.../<power zone>/max_energy_range_uj
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Range of the above energy counter in micro-joules.
+
+
+What:		/sys/class/powercap/.../<power zone>/power_uw
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Current power in micro-watts.
+
+What:		/sys/class/powercap/.../<power zone>/max_power_range_uw
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Range of the above power value in micro-watts.
+
+What:		/sys/class/powercap/.../<power zone>/constraint_X_name
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Each power zone can define one or more constraints. Each
+		constraint can have an optional name. Here "X" can have values
+		from 0 to max integer.
+
+What:		/sys/class/powercap/.../<power zone>/constraint_X_power_limit_uw
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Power limit in micro-watts should be applicable for
+		the time window specified by "constraint_X_time_window_us".
+		Here "X" can have values from 0 to max integer.
+
+What:		/sys/class/powercap/.../<power zone>/constraint_X_time_window_us
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Time window in micro seconds. This is used along with
+		constraint_X_power_limit_uw to define a power constraint.
+		Here "X" can have values from 0 to max integer.
+
+
+What:		/sys/class/powercap/<control type>/.../constraint_X_max_power_uw
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Maximum allowed power in micro watts for this constraint.
+		Here "X" can have values from 0 to max integer.
+
+What:		/sys/class/powercap/<control type>/.../constraint_X_min_power_uw
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Minimum allowed power in micro watts for this constraint.
+		Here "X" can have values from 0 to max integer.
+
+What:		/sys/class/powercap/.../<power zone>/constraint_X_max_time_window_us
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Maximum allowed time window in micro seconds for this
+		constraint. Here "X" can have values from 0 to max integer.
+
+What:		/sys/class/powercap/.../<power zone>/constraint_X_min_time_window_us
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Minimum allowed time window in micro seconds for this
+		constraint. Here "X" can have values from 0 to max integer.
+
+What:		/sys/class/powercap/.../<power zone>/enabled
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description
+		This allows to enable/disable power capping at power zone level.
+		This applies to current power zone and its children.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-pwm b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-pwm
new file mode 100644
index 0000000..c20e613
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-pwm
@@ -0,0 +1,88 @@
+What:		/sys/class/pwm/
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		The pwm/ class sub-directory belongs to the Generic PWM
+		Framework and provides a sysfs interface for using PWM
+		channels.
+
+What:		/sys/class/pwm/pwmchipN/
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		A /sys/class/pwm/pwmchipN directory is created for each
+		probed PWM controller/chip where N is the base of the
+		PWM chip.
+
+What:		/sys/class/pwm/pwmchipN/npwm
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		The number of PWM channels supported by the PWM chip.
+
+What:		/sys/class/pwm/pwmchipN/export
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Exports a PWM channel from the PWM chip for sysfs control.
+		Value is between 0 and /sys/class/pwm/pwmchipN/npwm - 1.
+
+What:		/sys/class/pwm/pwmchipN/unexport
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Unexports a PWM channel.
+
+What:		/sys/class/pwm/pwmchipN/pwmX
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		A /sys/class/pwm/pwmchipN/pwmX directory is created for
+		each exported PWM channel where X is the exported PWM
+		channel number.
+
+What:		/sys/class/pwm/pwmchipN/pwmX/period
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Sets the PWM signal period in nanoseconds.
+
+What:		/sys/class/pwm/pwmchipN/pwmX/duty_cycle
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Sets the PWM signal duty cycle in nanoseconds.
+
+What:		/sys/class/pwm/pwmchipN/pwmX/polarity
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Sets the output polarity of the PWM signal to "normal" or
+		"inversed".
+
+What:		/sys/class/pwm/pwmchipN/pwmX/enable
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Enable/disable the PWM signal.
+		0 is disabled
+		1 is enabled
+
+What:		/sys/class/pwm/pwmchipN/pwmX/capture
+Date:		June 2016
+KernelVersion:	4.8
+Contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Capture information about a PWM signal. The output format is a
+		pair unsigned integers (period and duty cycle), separated by a
+		single space.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-rc b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-rc
new file mode 100644
index 0000000..8be1fd3
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-rc
@@ -0,0 +1,111 @@
+What:		/sys/class/rc/
+Date:		Apr 2010
+KernelVersion:	2.6.35
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		The rc/ class sub-directory belongs to the Remote Controller
+		core and provides a sysfs interface for configuring infrared
+		remote controller receivers.
+
+What:		/sys/class/rc/rcN/
+Date:		Apr 2010
+KernelVersion:	2.6.35
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		A /sys/class/rc/rcN directory is created for each remote
+		control receiver device where N is the number of the receiver.
+
+What:		/sys/class/rc/rcN/protocols
+Date:		Jun 2010
+KernelVersion:	2.6.36
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		Reading this file returns a list of available protocols,
+		something like:
+		    "rc5 [rc6] nec jvc [sony]"
+		Enabled protocols are shown in [] brackets.
+		Writing "+proto" will add a protocol to the list of enabled
+		protocols.
+		Writing "-proto" will remove a protocol from the list of enabled
+		protocols.
+		Writing "proto" will enable only "proto".
+		Writing "none" will disable all protocols.
+		Write fails with EINVAL if an invalid protocol combination or
+		unknown protocol name is used.
+
+What:		/sys/class/rc/rcN/filter
+Date:		Jan 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		Sets the scancode filter expected value.
+		Use in combination with /sys/class/rc/rcN/filter_mask to set the
+		expected value of the bits set in the filter mask.
+		If the hardware supports it then scancodes which do not match
+		the filter will be ignored. Otherwise the write will fail with
+		an error.
+		This value may be reset to 0 if the current protocol is altered.
+
+What:		/sys/class/rc/rcN/filter_mask
+Date:		Jan 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		Sets the scancode filter mask of bits to compare.
+		Use in combination with /sys/class/rc/rcN/filter to set the bits
+		of the scancode which should be compared against the expected
+		value. A value of 0 disables the filter to allow all valid
+		scancodes to be processed.
+		If the hardware supports it then scancodes which do not match
+		the filter will be ignored. Otherwise the write will fail with
+		an error.
+		This value may be reset to 0 if the current protocol is altered.
+
+What:		/sys/class/rc/rcN/wakeup_protocols
+Date:		Feb 2017
+KernelVersion:	4.11
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		Reading this file returns a list of available protocols to use
+		for the wakeup filter, something like:
+		    "rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce"
+		Note that protocol variants are listed, so "nec", "sony",
+		"rc-5", "rc-6" have their different bit length encodings
+		listed if available.
+		The enabled wakeup protocol is shown in [] brackets.
+		Only one protocol can be selected at a time.
+		Writing "proto" will use "proto" for wakeup events.
+		Writing "none" will disable wakeup.
+		Write fails with EINVAL if an invalid protocol combination or
+		unknown protocol name is used, or if wakeup is not supported by
+		the hardware.
+
+What:		/sys/class/rc/rcN/wakeup_filter
+Date:		Jan 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		Sets the scancode wakeup filter expected value.
+		Use in combination with /sys/class/rc/rcN/wakeup_filter_mask to
+		set the expected value of the bits set in the wakeup filter mask
+		to trigger a system wake event.
+		If the hardware supports it and wakeup_filter_mask is not 0 then
+		scancodes which match the filter will wake the system from e.g.
+		suspend to RAM or power off.
+		Otherwise the write will fail with an error.
+		This value may be reset to 0 if the wakeup protocol is altered.
+
+What:		/sys/class/rc/rcN/wakeup_filter_mask
+Date:		Jan 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		Sets the scancode wakeup filter mask of bits to compare.
+		Use in combination with /sys/class/rc/rcN/wakeup_filter to set
+		the bits of the scancode which should be compared against the
+		expected value to trigger a system wake event.
+		If the hardware supports it and wakeup_filter_mask is not 0 then
+		scancodes which match the filter will wake the system from e.g.
+		suspend to RAM or power off.
+		Otherwise the write will fail with an error.
+		This value may be reset to 0 if the wakeup protocol is altered.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-rc-nuvoton b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-rc-nuvoton
new file mode 100644
index 0000000..905bcde
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-rc-nuvoton
@@ -0,0 +1,15 @@
+What:		/sys/class/rc/rcN/wakeup_data
+Date:		Mar 2016
+KernelVersion:	4.6
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		Reading this file returns the stored CIR wakeup sequence.
+		It starts with a pulse, followed by a space, pulse etc.
+		All values are in microseconds.
+		The same format can be used to store a wakeup sequence
+		in the Nuvoton chip by writing to this file.
+
+		Note: Some systems reset the stored wakeup sequence to a
+		factory default on each boot. On such systems store the
+		wakeup sequence in a file and set it on boot using e.g.
+		a udev rule.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-regulator b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-regulator
new file mode 100644
index 0000000..bc578bc
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-regulator
@@ -0,0 +1,372 @@
+What:		/sys/class/regulator/.../state
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		state. This reports the regulator enable control, for
+		regulators which can report that input value.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'unknown'
+
+		'enabled' means the regulator output is ON and is supplying
+		power to the system (assuming no error prevents it).
+
+		'disabled' means the regulator output is OFF and is not
+		supplying power to the system (unless some non-Linux
+		control has enabled it).
+
+		'unknown' means software cannot determine the state, or
+		the reported state is invalid.
+
+		NOTE: this field can be used in conjunction with microvolts
+		or microamps to determine configured regulator output levels.
+
+
+What:		/sys/class/regulator/.../status
+Description:
+		Some regulator directories will contain a field called
+		"status". This reports the current regulator status, for
+		regulators which can report that output value.
+
+		This will be one of the following strings:
+
+			off
+			on
+			error
+			fast
+			normal
+			idle
+			standby
+
+		"off" means the regulator is not supplying power to the
+		system.
+
+		"on" means the regulator is supplying power to the system,
+		and the regulator can't report a detailed operation mode.
+
+		"error" indicates an out-of-regulation status such as being
+		disabled due to thermal shutdown, or voltage being unstable
+		because of problems with the input power supply.
+
+		"fast", "normal", "idle", and "standby" are all detailed
+		regulator operation modes (described elsewhere).  They
+		imply "on", but provide more detail.
+
+		Note that regulator status is a function of many inputs,
+		not limited to control inputs from Linux.  For example,
+		the actual load presented may trigger "error" status; or
+		a regulator may be enabled by another user, even though
+		Linux did not enable it.
+
+
+What:		/sys/class/regulator/.../type
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Each regulator directory will contain a field called
+		type. This holds the regulator type.
+
+		This will be one of the following strings:
+
+		'voltage'
+		'current'
+		'unknown'
+
+		'voltage' means the regulator output voltage can be controlled
+		by software.
+
+		'current' means the regulator output current limit can be
+		controlled by software.
+
+		'unknown' means software cannot control either voltage or
+		current limit.
+
+
+What:		/sys/class/regulator/.../microvolts
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		microvolts. This holds the regulator output voltage setting
+		measured in microvolts (i.e. E-6 Volts), for regulators
+		which can report the control input for voltage.
+
+		NOTE: This value should not be used to determine the regulator
+		output voltage level as this value is the same regardless of
+		whether the regulator is enabled or disabled.
+
+
+What:		/sys/class/regulator/.../microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		microamps. This holds the regulator output current limit
+		setting measured in microamps (i.e. E-6 Amps), for regulators
+		which can report the control input for a current limit.
+
+		NOTE: This value should not be used to determine the regulator
+		output current level as this value is the same regardless of
+		whether the regulator is enabled or disabled.
+
+
+What:		/sys/class/regulator/.../opmode
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		opmode. This holds the current regulator operating mode,
+		for regulators which can report that control input value.
+
+		The opmode value can be one of the following strings:
+
+		'fast'
+		'normal'
+		'idle'
+		'standby'
+		'unknown'
+
+		The modes are described in include/linux/regulator/consumer.h
+
+		NOTE: This value should not be used to determine the regulator
+		output operating mode as this value is the same regardless of
+		whether the regulator is enabled or disabled.  A "status"
+		attribute may be available to determine the actual mode.
+
+
+What:		/sys/class/regulator/.../min_microvolts
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		min_microvolts. This holds the minimum safe working regulator
+		output voltage setting for this domain measured in microvolts,
+		for regulators which support voltage constraints.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no min microvolts constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../max_microvolts
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		max_microvolts. This holds the maximum safe working regulator
+		output voltage setting for this domain measured in microvolts,
+		for regulators which support voltage constraints.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no max microvolts constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../min_microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		min_microamps. This holds the minimum safe working regulator
+		output current limit setting for this domain measured in
+		microamps, for regulators which support current constraints.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no min microamps constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../max_microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		max_microamps. This holds the maximum safe working regulator
+		output current limit setting for this domain measured in
+		microamps, for regulators which support current constraints.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no max microamps constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../name
+Date:		October 2008
+KernelVersion:	2.6.28
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Each regulator directory will contain a field called
+		name. This holds a string identifying the regulator for
+		display purposes.
+
+		NOTE: this will be empty if no suitable name is provided
+		by platform or regulator drivers.
+
+
+What:		/sys/class/regulator/.../num_users
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Each regulator directory will contain a field called
+		num_users. This holds the number of consumer devices that
+		have called regulator_enable() on this regulator.
+
+
+What:		/sys/class/regulator/.../requested_microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		requested_microamps. This holds the total requested load
+		current in microamps for this regulator from all its consumer
+		devices.
+
+
+What:		/sys/class/regulator/.../parent
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a link called parent.
+		This points to the parent or supply regulator if one exists.
+
+What:		/sys/class/regulator/.../suspend_mem_microvolts
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_mem_microvolts. This holds the regulator output
+		voltage setting for this domain measured in microvolts when
+		the system is suspended to memory, for voltage regulators
+		implementing suspend voltage configuration constraints.
+
+What:		/sys/class/regulator/.../suspend_disk_microvolts
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_disk_microvolts. This holds the regulator output
+		voltage setting for this domain measured in microvolts when
+		the system is suspended to disk, for voltage regulators
+		implementing suspend voltage configuration constraints.
+
+What:		/sys/class/regulator/.../suspend_standby_microvolts
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_standby_microvolts. This holds the regulator output
+		voltage setting for this domain measured in microvolts when
+		the system is suspended to standby, for voltage regulators
+		implementing suspend voltage configuration constraints.
+
+What:		/sys/class/regulator/.../suspend_mem_mode
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_mem_mode. This holds the regulator operating mode
+		setting for this domain when the system is suspended to
+		memory, for regulators implementing suspend mode
+		configuration constraints.
+
+What:		/sys/class/regulator/.../suspend_disk_mode
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_disk_mode. This holds the regulator operating mode
+		setting for this domain when the system is suspended to disk,
+		for regulators implementing suspend mode configuration
+		constraints.
+
+What:		/sys/class/regulator/.../suspend_standby_mode
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_standby_mode. This holds the regulator operating mode
+		setting for this domain when the system is suspended to
+		standby, for regulators implementing suspend mode
+		configuration constraints.
+
+What:		/sys/class/regulator/.../suspend_mem_state
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_mem_state. This holds the regulator operating state
+		when suspended to memory, for regulators implementing suspend
+		configuration constraints.
+
+		This will be one of the same strings reported by
+		the "state" attribute.
+
+What:		/sys/class/regulator/.../suspend_disk_state
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_disk_state. This holds the regulator operating state
+		when suspended to disk, for regulators implementing
+		suspend configuration constraints.
+
+		This will be one of the same strings reported by
+		the "state" attribute.
+
+What:		/sys/class/regulator/.../suspend_standby_state
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_standby_state. This holds the regulator operating
+		state when suspended to standby, for regulators implementing
+		suspend configuration constraints.
+
+		This will be one of the same strings reported by
+		the "state" attribute.
+
+What:		/sys/class/regulator/.../bypass
+Date:		September 2012
+KernelVersion:	3.7
+Contact:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+Description:
+		Some regulator directories will contain a field called
+		bypass.  This indicates if the device is in bypass mode.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'unknown'
+
+		'enabled' means the regulator is in bypass mode.
+
+		'disabled' means that the regulator is regulating.
+
+		'unknown' means software cannot determine the state, or
+		the reported state is invalid.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-remoteproc b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-remoteproc
new file mode 100644
index 0000000..c3afe9f
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-remoteproc
@@ -0,0 +1,50 @@
+What:		/sys/class/remoteproc/.../firmware
+Date:		October 2016
+Contact:	Matt Redfearn <matt.redfearn@mips.com>
+Description:	Remote processor firmware
+
+		Reports the name of the firmware currently loaded to the
+		remote processor.
+
+		To change the running firmware, ensure the remote processor is
+		stopped (using /sys/class/remoteproc/.../state) and write a new filename.
+
+What:		/sys/class/remoteproc/.../state
+Date:		October 2016
+Contact:	Matt Redfearn <matt.redfearn@mips.com>
+Description:	Remote processor state
+
+		Reports the state of the remote processor, which will be one of:
+
+		"offline"
+		"suspended"
+		"running"
+		"crashed"
+		"invalid"
+
+		"offline" means the remote processor is powered off.
+
+		"suspended" means that the remote processor is suspended and
+		must be woken to receive messages.
+
+		"running" is the normal state of an available remote processor
+
+		"crashed" indicates that a problem/crash has been detected on
+		the remote processor.
+
+		"invalid" is returned if the remote processor is in an
+		unknown state.
+
+		Writing this file controls the state of the remote processor.
+		The following states can be written:
+
+		"start"
+		"stop"
+
+		Writing "start" will attempt to start the processor running the
+		firmware indicated by, or written to,
+		/sys/class/remoteproc/.../firmware. The remote processor should
+		transition to "running" state.
+
+		Writing "stop" will attempt to halt the remote processor and
+		return it to the "offline" state.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration
new file mode 100644
index 0000000..ec950c9
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration
@@ -0,0 +1,13 @@
+What:           /sys/class/rtc/rtc0/device/rtc_calibration
+Date:           Oct 2011
+KernelVersion:  3.0
+Contact:        Mark Godfrey <mark.godfrey@stericsson.com>
+Description:    Attribute for calibrating ST-Ericsson AB8500 Real Time Clock
+		The rtc_calibration attribute allows the userspace to
+                calibrate the AB8500.s 32KHz Real Time Clock.
+                Every 60 seconds the AB8500 will correct the RTC's value
+                by adding to it the value of this attribute.
+                The range of the attribute is -127 to +127 in units of
+                30.5 micro-seconds (half-parts-per-million of the 32KHz clock)
+Users:          The /vendor/st-ericsson/base_utilities/core/rtc_calibration
+                daemon uses this interface.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-scsi_host b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-scsi_host
new file mode 100644
index 0000000..0eb255e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-scsi_host
@@ -0,0 +1,29 @@
+What:		/sys/class/scsi_host/hostX/isci_id
+Date:		June 2011
+Contact:	Dave Jiang <dave.jiang@intel.com>
+Description:
+		This file contains the enumerated host ID for the Intel
+		SCU controller. The Intel(R) C600 Series Chipset SATA/SAS
+		Storage Control Unit embeds up to two 4-port controllers in
+		a single PCI device.  The controllers are enumerated in order
+		which usually means the lowest number scsi_host corresponds
+		with the first controller, but this association is not
+		guaranteed.  The 'isci_id' attribute unambiguously identifies
+		the controller index: '0' for the first controller,
+		'1' for the second.
+
+What:		/sys/class/scsi_host/hostX/acciopath_status
+Date:		November 2013
+Contact:	Stephen M. Cameron <scameron@beardog.cce.hp.com>
+Description:	This file contains the current status of the "SSD Smart Path"
+		feature of HP Smart Array RAID controllers using the hpsa
+		driver.  SSD Smart Path, when enabled permits the driver to
+		send i/o requests directly to physical devices that are part
+		of a logical drive, bypassing the controllers firmware RAID
+		stack for a performance advantage when possible.  A value of
+		'1' indicates the feature is enabled, and the controller may
+		use the direct i/o path to physical devices.  A value of zero
+		means the feature is disabled and the controller may not use
+		the direct i/o path to physical devices.  This setting is
+		controller wide, affecting all configured logical drives on the
+		controller.  This file is readable and writable.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-scsi_tape b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-scsi_tape
new file mode 100644
index 0000000..9be398b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-scsi_tape
@@ -0,0 +1,109 @@
+What:           /sys/class/scsi_tape/*/stats/in_flight
+Date:           Apr 2015
+KernelVersion:  4.2
+Contact:        Shane Seymour <shane.seymour@hp.com>
+Description:
+		Show the number of I/Os currently in-flight between the st
+		module and the SCSI mid-layer.
+Users:
+
+
+What:           /sys/class/scsi_tape/*/stats/io_ns
+Date:           Apr 2015
+KernelVersion:  4.2
+Contact:        Shane Seymour <shane.seymour@hp.com>
+Description:
+		Shows the total amount of time spent waiting for all I/O
+                to and from the tape drive to complete. This includes all
+                reads, writes, and other SCSI commands issued to the tape
+                drive. An example of other SCSI commands would be tape
+                movement such as a rewind when a rewind tape device is
+                closed. This item is measured in nanoseconds.
+
+                To determine the amount of time spent waiting for other I/O
+                to complete subtract read_ns and write_ns from this value.
+Users:
+
+
+What:           /sys/class/scsi_tape/*/stats/other_cnt
+Date:           Apr 2015
+KernelVersion:  4.2
+Contact:        Shane Seymour <shane.seymour@hp.com>
+Description:
+		The number of I/O requests issued to the tape drive other
+		than SCSI read/write requests.
+Users:
+
+
+What:           /sys/class/scsi_tape/*/stats/read_byte_cnt
+Date:           Apr 2015
+KernelVersion:  4.2
+Contact:        Shane Seymour <shane.seymour@hp.com>
+Description:
+		Shows the total number of bytes requested from the tape drive.
+		This value is presented in bytes because tape drives support
+		variable length block sizes.
+Users:
+
+
+What:           /sys/class/scsi_tape/*/stats/read_cnt
+Date:           Apr 2015
+KernelVersion:  4.2
+Contact:        Shane Seymour <shane.seymour@hp.com>
+Description:
+		Shows the total number of read requests issued to the tape
+		drive.
+Users:
+
+
+What:           /sys/class/scsi_tape/*/stats/read_ns
+Date:           Apr 2015
+KernelVersion:  4.2
+Contact:        Shane Seymour <shane.seymour@hp.com>
+Description:
+		Shows the total amount of time in nanoseconds waiting for
+		read I/O requests to complete.
+Users:
+
+
+What:           /sys/class/scsi_tape/*/stats/write_byte_cnt
+Date:           Apr 2015
+KernelVersion:  4.2
+Contact:        Shane Seymour <shane.seymour@hp.com>
+Description:
+		Shows the total number of bytes written to the tape drive.
+		This value is presented in bytes because tape drives support
+		variable length block sizes.
+Users:
+
+
+What:           /sys/class/scsi_tape/*/stats/write_cnt
+Date:           Apr 2015
+KernelVersion:  4.2
+Contact:        Shane Seymour <shane.seymour@hp.com>
+Description:
+		Shows the total number of write requests issued to the tape
+		drive.
+Users:
+
+
+What:           /sys/class/scsi_tape/*/stats/write_ms
+Date:           Apr 2015
+KernelVersion:  4.2
+Contact:        Shane Seymour <shane.seymour@hp.com>
+Description:
+		Shows the total amount of time in nanoseconds waiting for
+		write I/O requests to complete.
+Users:
+
+
+What:           /sys/class/scsi_tape/*/stats/resid_cnt
+Date:           Apr 2015
+KernelVersion:  4.2
+Contact:        Shane Seymour <shane.seymour@hp.com>
+Description:
+		Shows the number of times we found that a residual >0
+		was found when the SCSI midlayer indicated that there was
+		an error. For reads this may be a case of someone issuing
+		reads greater than the block size.
+Users:
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-stm b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-stm
new file mode 100644
index 0000000..77ed3da
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-stm
@@ -0,0 +1,24 @@
+What:		/sys/class/stm/<stm>/masters
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:
+		Shows first and last available to software master numbers on
+		this STM device.
+
+What:		/sys/class/stm/<stm>/channels
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:
+		Shows the number of channels per master on this STM device.
+
+What:		/sys/class/stm/<stm>/hw_override
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:
+		Reads as 0 if master numbers in the STP stream produced by
+		this stm device will match the master numbers assigned by
+		the software or 1 if the stm hardware overrides software
+		assigned masters.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-stm_source b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-stm_source
new file mode 100644
index 0000000..57b8dd3
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-stm_source
@@ -0,0 +1,11 @@
+What:		/sys/class/stm_source/<stm_source>/stm_source_link
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:
+		stm_source device linkage to stm device, where its tracing data
+		is directed. Reads return an existing connection or "<none>" if
+		this stm_source is not connected to any stm device yet.
+		Write an existing (registered) stm device's name here to
+		connect that device. If a device is already connected to this
+		stm_source, it will first be disconnected.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-switchtec b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-switchtec
new file mode 100644
index 0000000..48cb4c1
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-switchtec
@@ -0,0 +1,96 @@
+switchtec - Microsemi Switchtec PCI Switch Management Endpoint
+
+For details on this subsystem look at Documentation/switchtec.txt.
+
+What: 		/sys/class/switchtec
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	The switchtec class subsystem folder.
+		Each registered switchtec driver is represented by a switchtecX
+		subfolder (X being an integer >= 0).
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/component_id
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Component identifier as stored in the hardware (eg. PM8543)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/component_revision
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Component revision stored in the hardware (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/component_vendor
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Component vendor as stored in the hardware (eg. MICROSEM)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/device_version
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Device version as stored in the hardware (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/fw_version
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Currently running firmware version (read only)
+Values: 	integer (in hexadecimal).
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/partition
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Partition number for this device in the switch (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/partition_count
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Total number of partitions in the switch (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/product_id
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Product identifier as stored in the hardware (eg. PSX 48XG3)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/product_revision
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Product revision stored in the hardware (eg. RevB)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/product_vendor
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Product vendor as stored in the hardware (eg. MICROSEM)
+		(read only)
+Values: 	arbitrary string.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-typec b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-typec
new file mode 100644
index 0000000..5be552e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-typec
@@ -0,0 +1,291 @@
+USB Type-C port devices (eg. /sys/class/typec/port0/)
+
+What:		/sys/class/typec/<port>/data_role
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The supported USB data roles. This attribute can be used for
+		requesting data role swapping on the port. Swapping is supported
+		as synchronous operation, so write(2) to the attribute will not
+		return until the operation has finished. The attribute is
+		notified about role changes so that poll(2) on the attribute
+		wakes up. Change on the role will also generate uevent
+		KOBJ_CHANGE on the port. The current role is show in brackets,
+		for example "[host] device" when DRP port is in host mode.
+
+		Valid values: host, device
+
+What:		/sys/class/typec/<port>/power_role
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The supported power roles. This attribute can be used to request
+		power role swap on the port when the port supports USB Power
+		Delivery. Swapping is supported as synchronous operation, so
+		write(2) to the attribute will not return until the operation
+		has finished. The attribute is notified about role changes so
+		that poll(2) on the attribute wakes up. Change on the role will
+		also generate uevent KOBJ_CHANGE. The current role is show in
+		brackets, for example "[source] sink" when in source mode.
+
+		Valid values: source, sink
+
+What:           /sys/class/typec/<port>/port_type
+Date:           May 2017
+Contact:	Badhri Jagan Sridharan <Badhri@google.com>
+Description:
+		Indicates the type of the port. This attribute can be used for
+		requesting a change in the port type. Port type change is
+		supported as a synchronous operation, so write(2) to the
+		attribute will not return until the operation has finished.
+
+		Valid values:
+		- source (The port will behave as source only DFP port)
+		- sink (The port will behave as sink only UFP port)
+		- dual (The port will behave as dual-role-data and
+			dual-role-power port)
+
+What:		/sys/class/typec/<port>/vconn_source
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows is the port VCONN Source. This attribute can be used to
+		request VCONN swap to change the VCONN Source during connection
+		when both the port and the partner support USB Power Delivery.
+		Swapping is supported as synchronous operation, so write(2) to
+		the attribute will not return until the operation has finished.
+		The attribute is notified about VCONN source changes so that
+		poll(2) on the attribute wakes up. Change on VCONN source also
+		generates uevent KOBJ_CHANGE.
+
+		Valid values:
+		- "no" when the port is not the VCONN Source
+		- "yes" when the port is the VCONN Source
+
+What:		/sys/class/typec/<port>/power_operation_mode
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows the current power operational mode the port is in. The
+		power operation mode means current level for VBUS. In case USB
+		Power Delivery communication is used for negotiating the levels,
+		power operation mode should show "usb_power_delivery".
+
+		Valid values:
+		- default
+		- 1.5A
+		- 3.0A
+		- usb_power_delivery
+
+What:		/sys/class/typec/<port>/preferred_role
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The user space can notify the driver about the preferred role.
+		It should be handled as enabling of Try.SRC or Try.SNK, as
+		defined in USB Type-C specification, in the port drivers. By
+		default the preferred role should come from the platform.
+
+		Valid values: source, sink, none (to remove preference)
+
+What:		/sys/class/typec/<port>/supported_accessory_modes
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Space separated list of accessory modes, defined in the USB
+		Type-C specification, the port supports.
+
+What:		/sys/class/typec/<port>/usb_power_delivery_revision
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Revision number of the supported USB Power Delivery
+		specification, or 0 when USB Power Delivery is not supported.
+
+What:		/sys/class/typec/<port>/usb_typec_revision
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Revision number of the supported USB Type-C specification.
+
+
+USB Type-C partner devices (eg. /sys/class/typec/port0-partner/)
+
+What:		/sys/class/typec/<port>-partner/accessory_mode
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows the Accessory Mode name when the partner is an Accessory.
+		The Accessory Modes are defined in USB Type-C Specification.
+
+What:		/sys/class/typec/<port>-partner/supports_usb_power_delivery
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows if the partner supports USB Power Delivery communication:
+		Valid values: yes, no
+
+What:		/sys/class/typec/<port>-partner>/identity/
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This directory appears only if the port device driver is capable
+		of showing the result of Discover Identity USB power delivery
+		command. That will not always be possible even when USB power
+		delivery is supported, for example when USB power delivery
+		communication for the port is mostly handled in firmware. If the
+		directory exists, it will have an attribute file for every VDO
+		in Discover Identity command result.
+
+What:		/sys/class/typec/<port>-partner/identity/id_header
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		ID Header VDO part of Discover Identity command result. The
+		value will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+What:		/sys/class/typec/<port>-partner/identity/cert_stat
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Cert Stat VDO part of Discover Identity command result. The
+		value will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+What:		/sys/class/typec/<port>-partner/identity/product
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Product VDO part of Discover Identity command result. The value
+		will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+
+USB Type-C cable devices (eg. /sys/class/typec/port0-cable/)
+
+Note: Electronically Marked Cables will have a device also for one cable plug
+(eg. /sys/class/typec/port0-plug0). If the cable is active and has also SOP
+Double Prime controller (USB Power Deliver specification ch. 2.4) it will have
+second device also for the other plug. Both plugs may have alternate modes as
+described in USB Type-C and USB Power Delivery specifications.
+
+What:		/sys/class/typec/<port>-cable/type
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows if the cable is active.
+		Valid values: active, passive
+
+What:		/sys/class/typec/<port>-cable/plug_type
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows type of the plug on the cable:
+		- type-a - Standard A
+		- type-b - Standard B
+		- type-c
+		- captive
+
+What:		/sys/class/typec/<port>-cable/identity/
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This directory appears only if the port device driver is capable
+		of showing the result of Discover Identity USB power delivery
+		command. That will not always be possible even when USB power
+		delivery is supported. If the directory exists, it will have an
+		attribute for every VDO returned by Discover Identity command.
+
+What:		/sys/class/typec/<port>-cable/identity/id_header
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		ID Header VDO part of Discover Identity command result. The
+		value will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+What:		/sys/class/typec/<port>-cable/identity/cert_stat
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Cert Stat VDO part of Discover Identity command result. The
+		value will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+What:		/sys/class/typec/<port>-cable/identity/product
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Product VDO part of Discover Identity command result. The value
+		will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+
+Alternate Mode devices.
+
+The alternate modes will have Standard or Vendor ID (SVID) assigned by USB-IF.
+The ports, partners and cable plugs can have alternate modes. A supported SVID
+will consist of a set of modes. Every SVID a port/partner/plug supports will
+have a device created for it, and every supported mode for a supported SVID will
+have its own directory under that device. Below <dev> refers to the device for
+the alternate mode.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/svid
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The SVID (Standard or Vendor ID) assigned by USB-IF for this
+		alternate mode.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/mode<index>/
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Every supported mode will have its own directory. The name of
+		a mode will be "mode<index>" (for example mode1), where <index>
+		is the actual index to the mode VDO returned by Discover Modes
+		USB power delivery command.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/mode<index>/description
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows description of the mode. The description is optional for
+		the drivers, just like with the Billboard Devices.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/mode<index>/vdo
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows the VDO in hexadecimal returned by Discover Modes command
+		for this mode.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/mode<index>/active
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows if the mode is active or not. The attribute can be used
+		for entering/exiting the mode with partners and cable plugs, and
+		with the port alternate modes it can be used for disabling
+		support for specific alternate modes. Entering/exiting modes is
+		supported as synchronous operation so write(2) to the attribute
+		does not return until the enter/exit mode operation has
+		finished. The attribute is notified when the mode is
+		entered/exited so poll(2) on the attribute wakes up.
+		Entering/exiting a mode will also generate uevent KOBJ_CHANGE.
+
+		Valid values: yes, no
+
+What:		/sys/class/typec/<port>/<dev>/mode<index>/supported_roles
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Space separated list of the supported roles.
+
+		This attribute is available for the devices describing the
+		alternate modes a port supports, and it will not be exposed with
+		the devices presenting the alternate modes the partners or cable
+		plugs support.
+
+		Valid values: source, sink
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-uwb_rc b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-uwb_rc
new file mode 100644
index 0000000..85f4875
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-uwb_rc
@@ -0,0 +1,159 @@
+What:           /sys/class/uwb_rc
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                Interfaces for WiMedia Ultra Wideband Common Radio
+                Platform (UWB) radio controllers.
+
+                Familiarity with the ECMA-368 'High Rate Ultra
+                Wideband MAC and PHY Specification' is assumed.
+
+What:           /sys/class/uwb_rc/beacon_timeout_ms
+Date:           July 2008
+KernelVersion:  2.6.27
+Description:
+                If no beacons are received from a device for at least
+                this time, the device will be considered to have gone
+                and it will be removed.  The default is 3 superframes
+                (~197 ms) as required by the specification.
+
+What:           /sys/class/uwb_rc/uwbN/
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                An individual UWB radio controller.
+
+What:           /sys/class/uwb_rc/uwbN/beacon
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                Write:
+
+                <channel>
+
+                to force a specific channel to be used when beaconing,
+                or, if <channel> is -1, to prohibit beaconing.  If
+                <channel> is 0, then the default channel selection
+                algorithm will be used.  Valid channels depends on the
+                radio controller's supported band groups.
+
+                Reading returns the currently active channel, or -1 if
+                the radio controller is not beaconing.
+
+What:           /sys/class/uwb_rc/uwbN/ASIE
+Date:           August 2014
+KernelVersion:  3.18
+Contact:        linux-usb@vger.kernel.org
+Description:
+
+                The application-specific information element (ASIE)
+                included in this device's beacon, in space separated
+                hex octets.
+
+                Reading returns the current ASIE.  Writing replaces
+                the current ASIE with the one written.
+
+What:           /sys/class/uwb_rc/uwbN/scan
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                Write:
+
+                <channel> <type> [<bpst offset>]
+
+                to start (or stop) scanning on a channel.  <type> is one of:
+                    0 - scan
+                    1 - scan outside BP
+                    2 - scan while inactive
+                    3 - scanning disabled
+                    4 - scan (with start time of <bpst offset>)
+
+What:           /sys/class/uwb_rc/uwbN/mac_address
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                The EUI-48, in colon-separated hex octets, for this
+                radio controller.  A write will change the radio
+                controller's EUI-48 but only do so while the device is
+                not beaconing or scanning.
+
+What:           /sys/class/uwb_rc/uwbN/wusbhc
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                A symlink to the device (if any) of the WUSB Host
+                Controller PAL using this radio controller.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                A neighbour UWB device that has either been detected
+                as part of a scan or is a member of the radio
+                controllers beacon group.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/BPST
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                The time (using the radio controllers internal 1 ms
+                interval superframe timer) of the last beacon from
+                this device was received.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/DevAddr
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                The current DevAddr of this device in colon separated
+                hex octets.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/EUI_48
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+
+                The EUI-48 of this device in colon separated hex
+                octets.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/BPST
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/IEs
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                The latest IEs included in this device's beacon, in
+                space separated hex octets with one IE per line.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/LQE
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                Link Quality Estimate - the Signal to Noise Ratio
+                (SNR) of all packets received from this device in dB.
+                This gives an estimate on a suitable PHY rate. Refer
+                to [ECMA-368] section 13.3 for more details.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/RSSI
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                Received Signal Strength Indication - the strength of
+                the received signal in dB.  LQE is a more useful
+                measure of the radio link quality.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
new file mode 100644
index 0000000..5977e28
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
@@ -0,0 +1,57 @@
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_chid
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                Write the CHID (16 space-separated hex octets) for this host controller.
+                This starts the host controller, allowing it to accept connection from
+                WUSB devices.
+
+                Set an all zero CHID to stop the host controller.
+
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_trust_timeout
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                Devices that haven't sent a WUSB packet to the host
+                within 'wusb_trust_timeout' ms are considered to have
+                disconnected and are removed.  The default value of
+                4000 ms is the value required by the WUSB
+                specification.
+
+                Since this relates to security (specifically, the
+                lifetime of PTKs and GTKs) it should not be changed
+                from the default.
+
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_phy_rate
+Date:           August 2009
+KernelVersion:  2.6.32
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The maximum PHY rate to use for all connected devices.
+                This is only of limited use for testing and
+                development as the hardware's automatic rate
+                adaptation is better then this simple control.
+
+                Refer to [ECMA-368] section 10.3.1.1 for the value to
+                use.
+
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_dnts
+Date:           June 2013
+KernelVersion:  3.11
+Contact:        Thomas Pugliese <thomas.pugliese@gmail.com>
+Description:
+                The device notification time slot (DNTS) count and inverval in
+                milliseconds that the WUSB host should use.  This controls how
+                often the devices will have the opportunity to send
+                notifications to the host.
+
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_retry_count
+Date:           June 2013
+KernelVersion:  3.11
+Contact:        Thomas Pugliese <thomas.pugliese@gmail.com>
+Description:
+                The number of retries that the WUSB host should attempt
+                before reporting an error for a bus transaction.  The range of
+                valid values is [0..15], where 0 indicates infinite retries.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-watchdog b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-watchdog
new file mode 100644
index 0000000..736046b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-watchdog
@@ -0,0 +1,51 @@
+What:		/sys/class/watchdog/watchdogn/bootstatus
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It contains status of the watchdog
+		device at boot. It is equivalent to WDIOC_GETBOOTSTATUS of
+		ioctl interface.
+
+What:		/sys/class/watchdog/watchdogn/identity
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It contains identity string of
+		watchdog device.
+
+What:		/sys/class/watchdog/watchdogn/nowayout
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. While reading, it gives '1' if that
+		device supports nowayout feature else, it gives '0'.
+
+What:		/sys/class/watchdog/watchdogn/state
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It gives active/inactive status of
+		watchdog device.
+
+What:		/sys/class/watchdog/watchdogn/status
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It contains watchdog device's
+		internal status bits. It is equivalent to WDIOC_GETSTATUS
+		of ioctl interface.
+
+What:		/sys/class/watchdog/watchdogn/timeleft
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It contains value of time left for
+		reset generation. It is equivalent to WDIOC_GETTIMELEFT of
+		ioctl interface.
+
+What:		/sys/class/watchdog/watchdogn/timeout
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It is read to know about current
+		value of timeout programmed.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-zram b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-zram
new file mode 100644
index 0000000..48ddacb
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-class-zram
@@ -0,0 +1,24 @@
+What:		/sys/class/zram-control/
+Date:		August 2015
+KernelVersion:	4.2
+Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Description:
+		The zram-control/ class sub-directory belongs to zram
+		device class
+
+What:		/sys/class/zram-control/hot_add
+Date:		August 2015
+KernelVersion:	4.2
+Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Description:
+		RO attribute. Read operation will cause zram to add a new
+		device and return its device id back to user (so one can
+		use /dev/zram<id>), or error code.
+
+What:		/sys/class/zram-control/hot_remove
+Date:		August 2015
+KernelVersion:	4.2
+Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Description:
+		WO attribute. Remove a specific /dev/zramX device, where X
+		is a device_id provided by user.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-dev b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-dev
new file mode 100644
index 0000000..a9f2b8b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-dev
@@ -0,0 +1,20 @@
+What:		/sys/dev
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Dan Williams <dan.j.williams@intel.com>
+Description:	The /sys/dev tree provides a method to look up the sysfs
+		path for a device using the information returned from
+		stat(2).  There are two directories, 'block' and 'char',
+		beneath /sys/dev containing symbolic links with names of
+		the form "<major>:<minor>".  These links point to the
+		corresponding sysfs path for the given device.
+
+		Example:
+		$ readlink /sys/dev/block/8:32
+		../../block/sdc
+
+		Entries in /sys/dev/char and /sys/dev/block will be
+		dynamically created and destroyed as devices enter and
+		leave the system.
+
+Users:		mdadm <linux-raid@vger.kernel.org>
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices
new file mode 100644
index 0000000..5fcc943
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices
@@ -0,0 +1,25 @@
+What:		/sys/devices
+Date:		February 2006
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		The /sys/devices tree contains a snapshot of the
+		internal state of the kernel device tree.  Devices will
+		be added and removed dynamically as the machine runs,
+		and between different kernel versions, the layout of the
+		devices within this tree will change.
+
+		Please do not rely on the format of this tree because of
+		this.  If a program wishes to find different things in
+		the tree, please use the /sys/class structure and rely
+		on the symlinks there to point to the proper location
+		within the /sys/devices tree of the individual devices.
+		Or rely on the uevent messages to notify programs of
+		devices being added and removed from this tree to find
+		the location of those devices.
+
+		Note that sometimes not all devices along the directory
+		chain will have emitted uevent messages, so userspace
+		programs must be able to handle such occurrences.
+
+Users:
+	udev <linux-hotplug-devel@lists.sourceforge.net>
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-edac b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-edac
new file mode 100644
index 0000000..46ff929
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-edac
@@ -0,0 +1,157 @@
+What:		/sys/devices/system/edac/mc/mc*/reset_counters
+Date:		January 2006
+Contact:	linux-edac@vger.kernel.org
+Description:	This write-only control file will zero all the statistical
+		counters for UE and CE errors on the given memory controller.
+		Zeroing the counters will also reset the timer indicating how
+		long since the last counter were reset. This is useful for
+		computing errors/time.  Since the counters are always reset
+		at driver initialization time, no module/kernel parameter
+		is available.
+
+What:		/sys/devices/system/edac/mc/mc*/seconds_since_reset
+Date:		January 2006
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays how many seconds have elapsed
+		since the last counter reset. This can be used with the error
+		counters to measure error rates.
+
+What:		/sys/devices/system/edac/mc/mc*/mc_name
+Date:		January 2006
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays the type of memory controller
+		that is being utilized.
+
+What:		/sys/devices/system/edac/mc/mc*/size_mb
+Date:		January 2006
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays, in count of megabytes, of memory
+		that this memory controller manages.
+
+What:		/sys/devices/system/edac/mc/mc*/ue_count
+Date:		January 2006
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays the total count of uncorrectable
+		errors that have occurred on this memory controller. If
+		panic_on_ue is set, this counter will not have a chance to
+		increment, since EDAC will panic the system
+
+What:		/sys/devices/system/edac/mc/mc*/ue_noinfo_count
+Date:		January 2006
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays the number of UEs that have
+		occurred on this memory controller with no information as to
+		which DIMM slot is having errors.
+
+What:		/sys/devices/system/edac/mc/mc*/ce_count
+Date:		January 2006
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays the total count of correctable
+		errors that have occurred on this memory controller. This
+		count is very important to examine. CEs provide early
+		indications that a DIMM is beginning to fail. This count
+		field should be monitored for non-zero values and report
+		such information to the system administrator.
+
+What:		/sys/devices/system/edac/mc/mc*/ce_noinfo_count
+Date:		January 2006
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays the number of CEs that
+		have occurred on this memory controller wherewith no
+		information as to which DIMM slot is having errors. Memory is
+		handicapped, but operational, yet no information is available
+		to indicate which slot the failing memory is in. This count
+		field should be also be monitored for non-zero values.
+
+What:		/sys/devices/system/edac/mc/mc*/sdram_scrub_rate
+Date:		February 2007
+Contact:	linux-edac@vger.kernel.org
+Description:	Read/Write attribute file that controls memory scrubbing.
+		The scrubbing rate used by the memory controller is set by
+		writing a minimum bandwidth in bytes/sec to the attribute file.
+		The rate will be translated to an internal value that gives at
+		least the specified rate.
+		Reading the file will return the actual scrubbing rate employed.
+		If configuration fails or memory scrubbing is not implemented,
+		the value of the attribute file will be -1.
+
+What:		/sys/devices/system/edac/mc/mc*/max_location
+Date:		April 2012
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+		linux-edac@vger.kernel.org
+Description:	This attribute file displays the information about the last
+		available memory slot in this memory controller. It is used by
+		userspace tools in order to display the memory filling layout.
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/size
+Date:		April 2012
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+		linux-edac@vger.kernel.org
+Description:	This attribute file will display the size of dimm or rank.
+		For dimm*/size, this is the size, in MB of the DIMM memory
+		stick. For rank*/size, this is the size, in MB for one rank
+		of the DIMM memory stick. On single rank memories (1R), this
+		is also the total size of the dimm. On dual rank (2R) memories,
+		this is half the size of the total DIMM memories.
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_dev_type
+Date:		April 2012
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+		linux-edac@vger.kernel.org
+Description:	This attribute file will display what type of DRAM device is
+		being utilized on this DIMM (x1, x2, x4, x8, ...).
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_edac_mode
+Date:		April 2012
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+		linux-edac@vger.kernel.org
+Description:	This attribute file will display what type of Error detection
+		and correction is being utilized. For example: S4ECD4ED would
+		mean a Chipkill with x4 DRAM.
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_label
+Date:		April 2012
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+		linux-edac@vger.kernel.org
+Description:	This control file allows this DIMM to have a label assigned
+		to it. With this label in the module, when errors occur
+		the output can provide the DIMM label in the system log.
+		This becomes vital for panic events to isolate the
+		cause of the UE event.
+		DIMM Labels must be assigned after booting, with information
+		that correctly identifies the physical slot with its
+		silk screen label. This information is currently very
+		motherboard specific and determination of this information
+		must occur in userland at this time.
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_location
+Date:		April 2012
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+		linux-edac@vger.kernel.org
+Description:	This attribute file will display the location (csrow/channel,
+		branch/channel/slot or channel/slot) of the dimm or rank.
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_mem_type
+Date:		April 2012
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+		linux-edac@vger.kernel.org
+Description:	This attribute file will display what type of memory is
+		currently on this csrow. Normally, either buffered or
+		unbuffered memory (for example, Unbuffered-DDR3).
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_ce_count
+Date:		October 2016
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays the total count of correctable
+		errors that have occurred on this DIMM. This count is very important
+		to examine. CEs provide early indications that a DIMM is beginning
+		to fail. This count field should be monitored for non-zero values
+		and report such information to the system administrator.
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_ue_count
+Date:		October 2016
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays the total count of uncorrectable
+		errors that have occurred on this DIMM. If panic_on_ue is set, this
+		counter will not have a chance to increment, since EDAC will panic the
+		system
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-firmware_node b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-firmware_node
new file mode 100644
index 0000000..46badc9
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-firmware_node
@@ -0,0 +1,17 @@
+What:		/sys/devices/.../firmware_node/
+Date:		September 2012
+Contact:	<>
+Description:
+		The /sys/devices/.../firmware_node directory contains attributes
+		allowing the user space to check and modify some firmware
+		related properties of given device.
+
+What:		/sys/devices/.../firmware_node/description
+Date:		September 2012
+Contact:	Lance Ortiz <lance.ortiz@hp.com>
+Description:
+		The /sys/devices/.../firmware/description attribute contains a string
+		that describes the device as provided by the _STR method in the ACPI
+		namespace.  This attribute is read-only.  If the device does not have
+		an _STR method associated with it in the ACPI namespace, this
+		attribute is not present.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-lpss_ltr b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-lpss_ltr
new file mode 100644
index 0000000..ea9298d
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-lpss_ltr
@@ -0,0 +1,44 @@
+What:		/sys/devices/.../lpss_ltr/
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/ directory is only present for
+		devices included into the Intel Lynxpoint Low Power Subsystem
+		(LPSS).  If present, it contains attributes containing the LTR
+		mode and the values of LTR registers of the device.
+
+What:		/sys/devices/.../lpss_ltr/ltr_mode
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/ltr_mode attribute contains an
+		integer number (0 or 1) indicating whether or not the devices'
+		LTR functionality is working in the software mode (1).
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.
+
+What:		/sys/devices/.../lpss_ltr/auto_ltr
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/auto_ltr attribute contains the
+		current value of the device's AUTO_LTR register (raw)
+		represented as an 8-digit hexadecimal number.
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.
+
+What:		/sys/devices/.../lpss_ltr/sw_ltr
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/auto_ltr attribute contains the
+		current value of the device's SW_LTR register (raw) represented
+		as an 8-digit hexadecimal number.
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-memory b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-memory
new file mode 100644
index 0000000..deef3b5
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-memory
@@ -0,0 +1,93 @@
+What:		/sys/devices/system/memory
+Date:		June 2008
+Contact:	Badari Pulavarty <pbadari@us.ibm.com>
+Description:
+		The /sys/devices/system/memory contains a snapshot of the
+		internal state of the kernel memory blocks. Files could be
+		added or removed dynamically to represent hot-add/remove
+		operations.
+Users:		hotplug memory add/remove tools
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
+
+What:		/sys/devices/system/memory/memoryX/removable
+Date:		June 2008
+Contact:	Badari Pulavarty <pbadari@us.ibm.com>
+Description:
+		The file /sys/devices/system/memory/memoryX/removable
+		indicates whether this memory block is removable or not.
+		This is useful for a user-level agent to determine
+		identify removable sections of the memory before attempting
+		potentially expensive hot-remove memory operation
+Users:		hotplug memory remove tools
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils	
+
+What:		/sys/devices/system/memory/memoryX/phys_device
+Date:		September 2008
+Contact:	Badari Pulavarty <pbadari@us.ibm.com>
+Description:
+		The file /sys/devices/system/memory/memoryX/phys_device
+		is read-only and is designed to show the name of physical
+		memory device.  Implementation is currently incomplete.
+
+What:		/sys/devices/system/memory/memoryX/phys_index
+Date:		September 2008
+Contact:	Badari Pulavarty <pbadari@us.ibm.com>
+Description:
+		The file /sys/devices/system/memory/memoryX/phys_index
+		is read-only and contains the section ID in hexadecimal
+		which is equivalent to decimal X contained in the
+		memory section directory name.
+
+What:		/sys/devices/system/memory/memoryX/state
+Date:		September 2008
+Contact:	Badari Pulavarty <pbadari@us.ibm.com>
+Description:
+		The file /sys/devices/system/memory/memoryX/state
+		is read-write.  When read, its contents show the
+		online/offline state of the memory section.  When written,
+		root can toggle the the online/offline state of a removable
+		memory section (see removable file description above)
+		using the following commands.
+		# echo online > /sys/devices/system/memory/memoryX/state
+		# echo offline > /sys/devices/system/memory/memoryX/state
+
+		For example, if /sys/devices/system/memory/memory22/removable
+		contains a value of 1 and
+		/sys/devices/system/memory/memory22/state contains the
+		string "online" the following command can be executed by
+		by root to offline that section.
+		# echo offline > /sys/devices/system/memory/memory22/state
+Users:		hotplug memory remove tools
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
+
+
+What:           /sys/devices/system/memory/memoryX/valid_zones
+Date:           July 2014
+Contact:	Zhang Zhen <zhenzhang.zhang@huawei.com>
+Description:
+		The file /sys/devices/system/memory/memoryX/valid_zones	is
+		read-only and is designed to show which zone this memory
+		block can be onlined to.
+
+What:		/sys/devices/system/memoryX/nodeY
+Date:		October 2009
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		When CONFIG_NUMA is enabled, a symbolic link that
+		points to the corresponding NUMA node directory.
+
+		For example, the following symbolic link is created for
+		memory section 9 on node0:
+		/sys/devices/system/memory/memory9/node0 -> ../../node/node0
+
+
+What:		/sys/devices/system/node/nodeX/memoryY
+Date:		September 2008
+Contact:	Gary Hade <garyhade@us.ibm.com>
+Description:
+		When CONFIG_NUMA is enabled
+		/sys/devices/system/node/nodeX/memoryY is a symbolic link that
+		points to the corresponding /sys/devices/system/memory/memoryY
+		memory section directory.  For example, the following symbolic
+		link is created for memory section 9 on node0.
+		/sys/devices/system/node/node0/memory9 -> ../../memory/memory9
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-mmc b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-mmc
new file mode 100644
index 0000000..5a50ab6
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-mmc
@@ -0,0 +1,21 @@
+What:		/sys/devices/.../mmc_host/mmcX/mmcX:XXXX/enhanced_area_offset
+Date:		January 2011
+Contact:	Chuanxiao Dong <chuanxiao.dong@intel.com>
+Description:
+		Enhanced area is a new feature defined in eMMC4.4 standard.
+		eMMC4.4 or later card can support such feature. This kind of
+		area can help to improve the card performance. If the feature
+		is enabled, this attribute will indicate the start address of
+		enhanced data area. If not, this attribute will be -EINVAL.
+		Unit Byte. Format decimal.
+
+What:		/sys/devices/.../mmc_host/mmcX/mmcX:XXXX/enhanced_area_size
+Date:		January 2011
+Contact:	Chuanxiao Dong <chuanxiao.dong@intel.com>
+Description:
+		Enhanced area is a new feature defined in eMMC4.4 standard.
+		eMMC4.4 or later card can support such feature. This kind of
+		area can help to improve the card performance. If the feature
+		is enabled, this attribute will indicate the size of enhanced
+		data area. If not, this attribute will be -EINVAL.
+		Unit KByte. Format decimal.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-online b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-online
new file mode 100644
index 0000000..f990026
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-online
@@ -0,0 +1,20 @@
+What:		/sys/devices/.../online
+Date:		April 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../online attribute is only present for
+		devices whose bus types provide .online() and .offline()
+		callbacks.  The number read from it (0 or 1) reflects the value
+		of the device's 'offline' field.  If that number is 1 and '0'
+		(or 'n', or 'N') is written to this file, the device bus type's
+		.offline() callback is executed for the device and (if
+		successful) its 'offline' field is updated accordingly.  In
+		turn, if that number is 0 and '1' (or 'y', or 'Y') is written to
+		this file, the device bus type's .online() callback is executed
+		for the device and (if successful) its 'offline' field is
+		updated as appropriate.
+
+		After a successful execution of the bus type's .offline()
+		callback the device cannot be used for any purpose until either
+		it is removed (i.e. device_del() is called for it), or its bus
+		type's .online() is exeucted successfully.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
new file mode 100644
index 0000000..d548eaa
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
@@ -0,0 +1,21 @@
+What:		/sys/devices/platform/_UDC_/gadget/suspended
+Date:		April 2010
+Contact:	Fabien Chouteau <fabien.chouteau@barco.com>
+Description:
+		Show the suspend state of an USB composite gadget.
+		1 -> suspended
+		0 -> resumed
+
+		(_UDC_ is the name of the USB Device Controller driver)
+
+What:           /sys/devices/platform/_UDC_/gadget/gadget-lunX/nofua
+Date:           July 2010
+Contact:        Andy Shevchenko <andy.shevchenko@gmail.com>
+Description:
+		Show or set the reaction on the FUA (Force Unit Access) bit in
+		the SCSI WRITE(10,12) commands when a gadget in USB Mass
+		Storage mode.
+
+		Possible values are:
+			1 -> ignore the FUA flag
+			0 -> obey the FUA flag
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-platform-docg3 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-platform-docg3
new file mode 100644
index 0000000..8aa3671
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-platform-docg3
@@ -0,0 +1,34 @@
+What:		/sys/devices/platform/docg3/f[0-3]_dps[01]_is_keylocked
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	Robert Jarzmik <robert.jarzmik@free.fr>
+Description:
+		Show whether the floor (0 to 4), protection area (0 or 1) is
+		keylocked. Each docg3 chip (or floor) has 2 protection areas,
+		which can cover any part of it, block aligned, called DPS.
+		The protection has information embedded whether it blocks reads,
+		writes or both.
+		The result is:
+		0 -> the DPS is not keylocked
+		1 -> the DPS is keylocked
+Users:		None identified so far.
+
+What:		/sys/devices/platform/docg3/f[0-3]_dps[01]_protection_key
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	Robert Jarzmik <robert.jarzmik@free.fr>
+Description:
+		Enter the protection key for the floor (0 to 4), protection area
+		(0 or 1). Each docg3 chip (or floor) has 2 protection areas,
+		which can cover any part of it, block aligned, called DPS.
+		The protection has information embedded whether it blocks reads,
+		writes or both.
+		The protection key is a string of 8 bytes (value 0-255).
+		Entering the correct value toggle the lock, and can be observed
+		through f[0-3]_dps[01]_is_keylocked.
+		Possible values are:
+			- 8 bytes
+		Typical values are:
+			- "00000000"
+			- "12345678"
+Users:		None identified so far.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb
new file mode 100644
index 0000000..2107082
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb
@@ -0,0 +1,44 @@
+What:		/sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_alpha
+Date:		May 2012
+Contact:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+Description:
+		This file is only available on fb[0-9] devices corresponding
+		to overlay planes.
+
+		Stores the alpha blending value for the overlay. Values range
+		from 0 (transparent) to 255 (opaque). The value is ignored if
+		the mode is not set to Alpha Blending.
+
+What:		/sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_mode
+Date:		May 2012
+Contact:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+Description:
+		This file is only available on fb[0-9] devices corresponding
+		to overlay planes.
+
+		Selects the composition mode for the overlay. Possible values
+		are
+
+		0 - Alpha Blending
+		1 - ROP3
+
+What:		/sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_position
+Date:		May 2012
+Contact:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+Description:
+		This file is only available on fb[0-9] devices corresponding
+		to overlay planes.
+
+		Stores the x,y overlay position on the display in pixels. The
+		position format is `[0-9]+,[0-9]+'.
+
+What:		/sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_rop3
+Date:		May 2012
+Contact:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+Description:
+		This file is only available on fb[0-9] devices corresponding
+		to overlay planes.
+
+		Stores the raster operation (ROP3) for the overlay. Values
+		range from 0 to 255. The value is ignored if the mode is not
+		set to ROP3.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power
new file mode 100644
index 0000000..676fdf5
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power
@@ -0,0 +1,276 @@
+What:		/sys/devices/.../power/
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power directory contains attributes
+		allowing the user space to check and modify some power
+		management related properties of given device.
+
+What:		/sys/devices/.../power/wakeup
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power/wakeup attribute allows the user
+		space to check if the device is enabled to wake up the system
+		from sleep states, such as the memory sleep state (suspend to
+		RAM) and hibernation (suspend to disk), and to enable or disable
+		it to do that as desired.
+
+		Some devices support "wakeup" events, which are hardware signals
+		used to activate the system from a sleep state.  Such devices
+		have one of the following two values for the sysfs power/wakeup
+		file:
+
+		+ "enabled\n" to issue the events;
+		+ "disabled\n" not to do so;
+
+		In that cases the user space can change the setting represented
+		by the contents of this file by writing either "enabled", or
+		"disabled" to it.
+
+		For the devices that are not capable of generating system wakeup
+		events this file is not present.  In that case the device cannot
+		be enabled to wake up the system from sleep states.
+
+What:		/sys/devices/.../power/control
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power/control attribute allows the user
+		space to control the run-time power management of the device.
+
+		All devices have one of the following two values for the
+		power/control file:
+
+		+ "auto\n" to allow the device to be power managed at run time;
+		+ "on\n" to prevent the device from being power managed;
+
+		The default for all devices is "auto", which means that they may
+		be subject to automatic power management, depending on their
+		drivers.  Changing this attribute to "on" prevents the driver
+		from power managing the device at run time.  Doing that while
+		the device is suspended causes it to be woken up.
+
+What:		/sys/devices/.../power/async
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../async attribute allows the user space to
+		enable or diasble the device's suspend and resume callbacks to
+		be executed asynchronously (ie. in separate threads, in parallel
+		with the main suspend/resume thread) during system-wide power
+		transitions (eg. suspend to RAM, hibernation).
+
+		All devices have one of the following two values for the
+		power/async file:
+
+		+ "enabled\n" to permit the asynchronous suspend/resume;
+		+ "disabled\n" to forbid it;
+
+		The value of this attribute may be changed by writing either
+		"enabled", or "disabled" to it.
+
+		It generally is unsafe to permit the asynchronous suspend/resume
+		of a device unless it is certain that all of the PM dependencies
+		of the device are known to the PM core.  However, for some
+		devices this attribute is set to "enabled" by bus type code or
+		device drivers and in that cases it should be safe to leave the
+		default value.
+
+What:		/sys/devices/.../power/wakeup_count
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_count attribute contains the number
+		of signaled wakeup events associated with the device.  This
+		attribute is read-only.  If the device is not capable to wake up
+		the system from sleep states, this attribute is not present.
+		If the device is not enabled to wake up the system from sleep
+		states, this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_active_count
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_active_count attribute contains the
+		number of times the processing of wakeup events associated with
+		the device was completed (at the kernel level).  This attribute
+		is read-only.  If the device is not capable to wake up the
+		system from sleep states, this attribute is not present.  If
+		the device is not enabled to wake up the system from sleep
+		states, this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_abort_count
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_abort_count attribute contains the
+		number of times the processing of a wakeup event associated with
+		the device might have aborted system transition into a sleep
+		state in progress.  This attribute is read-only.  If the device
+		is not capable to wake up the system from sleep states, this
+		attribute is not present.  If the device is not enabled to wake
+		up the system from sleep states, this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_expire_count
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_expire_count attribute contains the
+		number of times a wakeup event associated with the device has
+		been reported with a timeout that expired.  This attribute is
+		read-only.  If the device is not capable to wake up the system
+		from sleep states, this attribute is not present.  If the
+		device is not enabled to wake up the system from sleep states,
+		this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_active
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_active attribute contains either 1,
+		or 0, depending on whether or not a wakeup event associated with
+		the device is being processed (1).  This attribute is read-only.
+		If the device is not capable to wake up the system from sleep
+		states, this attribute is not present.  If the device is not
+		enabled to wake up the system from sleep states, this attribute
+		is empty.
+
+What:		/sys/devices/.../power/wakeup_total_time_ms
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_total_time_ms attribute contains
+		the total time of processing wakeup events associated with the
+		device, in milliseconds.  This attribute is read-only.  If the
+		device is not capable to wake up the system from sleep states,
+		this attribute is not present.  If the device is not enabled to
+		wake up the system from sleep states, this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_max_time_ms
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_max_time_ms attribute contains
+		the maximum time of processing a single wakeup event associated
+		with the device, in milliseconds.  This attribute is read-only.
+		If the device is not capable to wake up the system from sleep
+		states, this attribute is not present.  If the device is not
+		enabled to wake up the system from sleep states, this attribute
+		is empty.
+
+What:		/sys/devices/.../power/wakeup_last_time_ms
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_last_time_ms attribute contains
+		the value of the monotonic clock corresponding to the time of
+		signaling the last wakeup event associated with the device, in
+		milliseconds.  This attribute is read-only.  If the device is
+		not enabled to wake up the system from sleep states, this
+		attribute is not present.  If the device is not enabled to wake
+		up the system from sleep states, this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_prevent_sleep_time_ms
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
+		contains the total time the device has been preventing
+		opportunistic transitions to sleep states from occurring.
+		This attribute is read-only.  If the device is not capable to
+		wake up the system from sleep states, this attribute is not
+		present.  If the device is not enabled to wake up the system
+		from sleep states, this attribute is empty.
+
+What:		/sys/devices/.../power/autosuspend_delay_ms
+Date:		September 2010
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		The /sys/devices/.../power/autosuspend_delay_ms attribute
+		contains the autosuspend delay value (in milliseconds).  Some
+		drivers do not want their device to suspend as soon as it
+		becomes idle at run time; they want the device to remain
+		inactive for a certain minimum period of time first.  That
+		period is called the autosuspend delay.  Negative values will
+		prevent the device from being suspended at run time (similar
+		to writing "on" to the power/control attribute).  Values >=
+		1000 will cause the autosuspend timer expiration to be rounded
+		up to the nearest second.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		attempts to read or write it will yield I/O errors.
+
+What:		/sys/devices/.../power/pm_qos_resume_latency_us
+Date:		March 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power/pm_qos_resume_latency_us attribute
+		contains the PM QoS resume latency limit for the given device,
+		which is the maximum allowed time it can take to resume the
+		device, after it has been suspended at run time, from a resume
+		request to the moment the device will be ready to process I/O,
+		in microseconds.  If it is equal to 0, however, this means that
+		the PM QoS resume latency may be arbitrary.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.
+
+What:		/sys/devices/.../power/pm_qos_latency_tolerance_us
+Date:		January 2014
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power/pm_qos_latency_tolerance_us attribute
+		contains the PM QoS active state latency tolerance limit for the
+		given device in microseconds.  That is the maximum memory access
+		latency the device can suffer without any visible adverse
+		effects on user space functionality.  If that value is the
+		string "any", the latency does not matter to user space at all,
+		but hardware should not be allowed to set the latency tolerance
+		for the device automatically.
+
+		Reading "auto" from this file means that the maximum memory
+		access latency for the device may be determined automatically
+		by the hardware as needed.  Writing "auto" to it allows the
+		hardware to be switched to this mode if there are no other
+		latency tolerance requirements from the kernel side.
+
+		This attribute is only present if the feature controlled by it
+		is supported by the hardware.
+
+		This attribute has no effect on runtime suspend and resume of
+		devices and on system-wide suspend/resume and hibernation.
+
+What:		/sys/devices/.../power/pm_qos_no_power_off
+Date:		September 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power/pm_qos_no_power_off attribute
+		is used for manipulating the PM QoS "no power off" flag.  If
+		set, this flag indicates to the kernel that power should not
+		be removed entirely from the device.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.
+
+What:		/sys/devices/.../power/pm_qos_remote_wakeup
+Date:		September 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power/pm_qos_remote_wakeup attribute
+		is used for manipulating the PM QoS "remote wakeup required"
+		flag.  If set, this flag indicates to the kernel that the
+		device is a source of user events that have to be signaled from
+		its low-power states.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_resources_D0 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_resources_D0
new file mode 100644
index 0000000..73b77a6
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_resources_D0
@@ -0,0 +1,13 @@
+What:		/sys/devices/.../power_resources_D0/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D0/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D0.  The names
+		of the links are the same as the names of the directories they
+		point to.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_resources_D1 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_resources_D1
new file mode 100644
index 0000000..30c2070
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_resources_D1
@@ -0,0 +1,14 @@
+What:		/sys/devices/.../power_resources_D1/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D1/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management and support ACPI
+		power state D1.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D1.  The names
+		of the links are the same as the names of the directories they
+		point to.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_resources_D2 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_resources_D2
new file mode 100644
index 0000000..fd9d84b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_resources_D2
@@ -0,0 +1,14 @@
+What:		/sys/devices/.../power_resources_D2/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D2/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management and support ACPI
+		power state D2.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D2.  The names
+		of the links are the same as the names of the directories they
+		point to.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot
new file mode 100644
index 0000000..3df32c2
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot
@@ -0,0 +1,14 @@
+What:		/sys/devices/.../power_resources_D3hot/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D3hot/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management and support ACPI
+		power state D3hot.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D3hot.  The
+		names of the links are the same as the names of the directories
+		they point to.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_resources_wakeup b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_resources_wakeup
new file mode 100644
index 0000000..e0588fe
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_resources_wakeup
@@ -0,0 +1,13 @@
+What:		/sys/devices/.../power_resources_wakeup/
+Date:		April 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_wakeup/ directory is only
+		present for device objects representing ACPI device nodes that
+		require ACPI power resources for wakeup signaling.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be able to signal wakeup.  The names of
+		the links are the same as the names of the directories they
+		point to.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_state b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_state
new file mode 100644
index 0000000..7ad9546
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-power_state
@@ -0,0 +1,20 @@
+What:		/sys/devices/.../power_state
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_state attribute is only present for
+		device objects representing ACPI device nodes that provide power
+		management methods.
+
+		If present, it contains a string representing the current ACPI
+		power state of the given device node.  Its possible values,
+		"D0", "D1", "D2", "D3hot", and "D3cold", reflect the power state
+		names defined by the ACPI specification (ACPI 4 and above).
+
+		If the device node uses shared ACPI power resources, this state
+		determines a list of power resources required not to be turned
+		off.  However, some power resources needed by the device node in
+		higher-power (lower-number) states may also be ON because of
+		some other devices using them at the moment.
+
+		This attribute is read-only.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-real_power_state b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-real_power_state
new file mode 100644
index 0000000..8b3527c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-real_power_state
@@ -0,0 +1,23 @@
+What:		/sys/devices/.../real_power_state
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../real_power_state attribute is only present
+		for device objects representing ACPI device nodes that provide
+		power management methods and use ACPI power resources for power
+		management.
+
+		If present, it contains a string representing the real ACPI
+		power state of the given device node as returned by the _PSC
+		control method or inferred from the configuration of power
+		resources.  Its possible values, "D0", "D1", "D2", "D3hot", and
+		"D3cold", reflect the power state names defined by the ACPI
+		specification (ACPI 4 and above).
+
+		In some situations the value of this attribute may be different
+		from the value of the /sys/devices/.../power_state attribute for
+		the same device object.  If that happens, some shared power
+		resources used by the device node are only ON because of some
+		other devices using them at the moment.
+
+		This attribute is read-only.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-resource_in_use b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-resource_in_use
new file mode 100644
index 0000000..b4a3bc5
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-resource_in_use
@@ -0,0 +1,12 @@
+What:		/sys/devices/.../resource_in_use
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../resource_in_use attribute is only present
+		for device objects representing ACPI power resources.
+
+		If present, it contains a number (0 or 1) representing the
+		current status of the given power resource (0 means that the
+		resource is not in use and therefore it has been turned off).
+
+		This attribute is read-only.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-soc b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-soc
new file mode 100644
index 0000000..6d9cc25
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-soc
@@ -0,0 +1,58 @@
+What:		/sys/devices/socX
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		The /sys/devices/ directory contains a sub-directory for each
+		System-on-Chip (SoC) device on a running platform. Information
+		regarding each SoC can be obtained by reading sysfs files. This
+		functionality is only available if implemented by the platform.
+
+		The directory created for each SoC will also house information
+		about devices which are commonly contained in /sys/devices/platform.
+		It has been agreed that if an SoC device exists, its supported
+		devices would be better suited to appear as children of that SoC.
+
+What:		/sys/devices/socX/machine
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute common to all SoCs. Contains the SoC machine
+		name (e.g. Ux500).
+
+What:		/sys/devices/socX/family
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute common to all SoCs. Contains SoC family name
+		(e.g. DB8500).
+
+What:		/sys/devices/socX/soc_id
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute supported by most SoCs. In the case of
+		ST-Ericsson's chips this contains the SoC serial number.
+
+What:		/sys/devices/socX/revision
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute supported by most SoCs. Contains the SoC's
+		manufacturing revision number.
+
+What:		/sys/devices/socX/process
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute supported ST-Ericsson's silicon. Contains the
+		the process by which the silicon chip was manufactured.
+
+What:		/sys/bus/soc
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		The /sys/bus/soc/ directory contains the usual sub-folders
+		expected under most buses. /sys/bus/soc/devices is of particular
+		interest, as it contains a symlink for each SoC device found on
+		the system. Each symlink points back into the aforementioned
+		/sys/devices/socX devices.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-sun b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-sun
new file mode 100644
index 0000000..625ce4b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-sun
@@ -0,0 +1,14 @@
+What:		/sys/devices/.../sun
+Date:		October 2012
+Contact:	Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
+Description:
+		The file contains a Slot-unique ID which provided by the _SUN
+		method in the ACPI namespace. The value is written in Advanced
+		Configuration and Power Interface Specification as follows:
+
+		"The _SUN value is required to be unique among the slots of
+		the same type. It is also recommended that this number match
+		the slot number printed on the physical slot whenever possible."
+
+		So reading the sysfs file, we can identify a physical position
+		of the slot in the system.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-system-cpu b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-system-cpu
new file mode 100644
index 0000000..5abe1cc
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -0,0 +1,419 @@
+What:		/sys/devices/system/cpu/
+Date:		pre-git history
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:
+		A collection of both global and individual CPU attributes
+
+		Individual CPU attributes are contained in subdirectories
+		named by the kernel's logical CPU number, e.g.:
+
+		/sys/devices/system/cpu/cpu#/
+
+What:		/sys/devices/system/cpu/kernel_max
+		/sys/devices/system/cpu/offline
+		/sys/devices/system/cpu/online
+		/sys/devices/system/cpu/possible
+		/sys/devices/system/cpu/present
+Date:		December 2008
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	CPU topology files that describe kernel limits related to
+		hotplug. Briefly:
+
+		kernel_max: the maximum cpu index allowed by the kernel
+		configuration.
+
+		offline: cpus that are not online because they have been
+		HOTPLUGGED off or exceed the limit of cpus allowed by the
+		kernel configuration (kernel_max above).
+
+		online: cpus that are online and being scheduled.
+
+		possible: cpus that have been allocated resources and can be
+		brought online if they are present.
+
+		present: cpus that have been identified as being present in
+		the system.
+
+		See Documentation/cputopology.txt for more information.
+
+
+What:		/sys/devices/system/cpu/probe
+		/sys/devices/system/cpu/release
+Date:		November 2009
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Dynamic addition and removal of CPU's.  This is not hotplug
+		removal, this is meant complete removal/addition of the CPU
+		from the system.
+
+		probe: writes to this file will dynamically add a CPU to the
+		system.  Information written to the file to add CPU's is
+		architecture specific.
+
+		release: writes to this file dynamically remove a CPU from
+		the system.  Information writtento the file to remove CPU's
+		is architecture specific.
+
+What:		/sys/devices/system/cpu/cpu#/node
+Date:		October 2009
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Discover NUMA node a CPU belongs to
+
+		When CONFIG_NUMA is enabled, a symbolic link that points
+		to the corresponding NUMA node directory.
+
+		For example, the following symlink is created for cpu42
+		in NUMA node 2:
+
+		/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
+
+
+What:		/sys/devices/system/cpu/cpu#/topology/core_id
+		/sys/devices/system/cpu/cpu#/topology/core_siblings
+		/sys/devices/system/cpu/cpu#/topology/core_siblings_list
+		/sys/devices/system/cpu/cpu#/topology/physical_package_id
+		/sys/devices/system/cpu/cpu#/topology/thread_siblings
+		/sys/devices/system/cpu/cpu#/topology/thread_siblings_list
+Date:		December 2008
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	CPU topology files that describe a logical CPU's relationship
+		to other cores and threads in the same physical package.
+
+		One cpu# directory is created per logical CPU in the system,
+		e.g. /sys/devices/system/cpu/cpu42/.
+
+		Briefly, the files above are:
+
+		core_id: the CPU core ID of cpu#. Typically it is the
+		hardware platform's identifier (rather than the kernel's).
+		The actual value is architecture and platform dependent.
+
+		core_siblings: internal kernel map of cpu#'s hardware threads
+		within the same physical_package_id.
+
+		core_siblings_list: human-readable list of the logical CPU
+		numbers within the same physical_package_id as cpu#.
+
+		physical_package_id: physical package id of cpu#. Typically
+		corresponds to a physical socket number, but the actual value
+		is architecture and platform dependent.
+
+		thread_siblings: internel kernel map of cpu#'s hardware
+		threads within the same core as cpu#
+
+		thread_siblings_list: human-readable list of cpu#'s hardware
+		threads within the same core as cpu#
+
+		See Documentation/cputopology.txt for more information.
+
+
+What:		/sys/devices/system/cpu/cpuidle/current_driver
+		/sys/devices/system/cpu/cpuidle/current_governer_ro
+Date:		September 2007
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Discover cpuidle policy and mechanism
+
+		Various CPUs today support multiple idle levels that are
+		differentiated by varying exit latencies and power
+		consumption during idle.
+
+		Idle policy (governor) is differentiated from idle mechanism
+		(driver)
+
+		current_driver: displays current idle mechanism
+
+		current_governor_ro: displays current idle policy
+
+		See files in Documentation/cpuidle/ for more information.
+
+
+What:		/sys/devices/system/cpu/cpu#/cpufreq/*
+Date:		pre-git history
+Contact:	linux-pm@vger.kernel.org
+Description:	Discover and change clock speed of CPUs
+
+		Clock scaling allows you to change the clock speed of the
+		CPUs on the fly. This is a nice method to save battery
+		power, because the lower the clock speed, the less power
+		the CPU consumes.
+
+		There are many knobs to tweak in this directory.
+
+		See files in Documentation/cpu-freq/ for more information.
+
+		In particular, read Documentation/cpu-freq/user-guide.txt
+		to learn how to control the knobs.
+
+
+What:		/sys/devices/system/cpu/cpu#/cpufreq/freqdomain_cpus
+Date:		June 2013
+Contact:	linux-pm@vger.kernel.org
+Description:	Discover CPUs in the same CPU frequency coordination domain
+
+		freqdomain_cpus is the list of CPUs (online+offline) that share
+		the same clock/freq domain (possibly at the hardware level).
+		That information may be hidden from the cpufreq core and the
+		value of related_cpus may be different from freqdomain_cpus. This
+		attribute is useful for user space DVFS controllers to get better
+		power/performance results for platforms using acpi-cpufreq.
+
+		This file is only present if the acpi-cpufreq driver is in use.
+
+
+What:		/sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1}
+Date:		August 2008
+KernelVersion:	2.6.27
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Disable L3 cache indices
+
+		These files exist in every CPU's cache/index3 directory. Each
+		cache_disable_{0,1} file corresponds to one disable slot which
+		can be used to disable a cache index. Reading from these files
+		on a processor with this functionality will return the currently
+		disabled index for that node. There is one L3 structure per
+		node, or per internal node on MCM machines. Writing a valid
+		index to one of these files will cause the specificed cache
+		index to be disabled.
+
+		All AMD processors with L3 caches provide this functionality.
+		For details, see BKDGs at
+		http://developer.amd.com/documentation/guides/Pages/default.aspx
+
+
+What:		/sys/devices/system/cpu/cpufreq/boost
+Date:		August 2012
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Processor frequency boosting control
+
+		This switch controls the boost setting for the whole system.
+		Boosting allows the CPU and the firmware to run at a frequency
+		beyound it's nominal limit.
+		More details can be found in Documentation/cpu-freq/boost.txt
+
+
+What:		/sys/devices/system/cpu/cpu#/crash_notes
+		/sys/devices/system/cpu/cpu#/crash_notes_size
+Date:		April 2013
+Contact:	kexec@lists.infradead.org
+Description:	address and size of the percpu note.
+
+		crash_notes: the physical address of the memory that holds the
+		note of cpu#.
+
+		crash_notes_size: size of the note of cpu#.
+
+
+What:		/sys/devices/system/cpu/intel_pstate/max_perf_pct
+		/sys/devices/system/cpu/intel_pstate/min_perf_pct
+		/sys/devices/system/cpu/intel_pstate/no_turbo
+Date:		February 2013
+Contact:	linux-pm@vger.kernel.org
+Description:	Parameters for the Intel P-state driver
+
+		Logic for selecting the current P-state in Intel
+		Sandybridge+ processors. The three knobs control
+		limits for the P-state that will be requested by the
+		driver.
+
+		max_perf_pct: limits the maximum P state that will be requested by
+		the driver stated as a percentage of the available performance.
+
+		min_perf_pct: limits the minimum P state that will be requested by
+		the driver stated as a percentage of the available performance.
+
+		no_turbo: limits the driver to selecting P states below the turbo
+		frequency range.
+
+		More details can be found in Documentation/cpu-freq/intel-pstate.txt
+
+What:		/sys/devices/system/cpu/cpu*/cache/index*/<set_of_attributes_mentioned_below>
+Date:		July 2014(documented, existed before August 2008)
+Contact:	Sudeep Holla <sudeep.holla@arm.com>
+		Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Parameters for the CPU cache attributes
+
+		allocation_policy:
+			- WriteAllocate: allocate a memory location to a cache line
+					 on a cache miss because of a write
+			- ReadAllocate: allocate a memory location to a cache line
+					on a cache miss because of a read
+			- ReadWriteAllocate: both writeallocate and readallocate
+
+		attributes: LEGACY used only on IA64 and is same as write_policy
+
+		coherency_line_size: the minimum amount of data in bytes that gets
+				     transferred from memory to cache
+
+		level: the cache hierarchy in the multi-level cache configuration
+
+		number_of_sets: total number of sets in the cache, a set is a
+				collection of cache lines with the same cache index
+
+		physical_line_partition: number of physical cache line per cache tag
+
+		shared_cpu_list: the list of logical cpus sharing the cache
+
+		shared_cpu_map: logical cpu mask containing the list of cpus sharing
+				the cache
+
+		size: the total cache size in kB
+
+		type:
+			- Instruction: cache that only holds instructions
+			- Data: cache that only caches data
+			- Unified: cache that holds both data and instructions
+
+		ways_of_associativity: degree of freedom in placing a particular block
+					of memory in the cache
+
+		write_policy:
+			- WriteThrough: data is written to both the cache line
+					and to the block in the lower-level memory
+			- WriteBack: data is written only to the cache line and
+				     the modified cache line is written to main
+				     memory only when it is replaced
+
+
+What:		/sys/devices/system/cpu/cpu*/cache/index*/id
+Date:		September 2016
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Cache id
+
+		The id provides a unique number for a specific instance of
+		a cache of a particular type. E.g. there may be a level
+		3 unified cache on each socket in a server and we may
+		assign them ids 0, 1, 2, ...
+
+		Note that id value can be non-contiguous. E.g. level 1
+		caches typically exist per core, but there may not be a
+		power of two cores on a socket, so these caches may be
+		numbered 0, 1, 2, 3, 4, 5, 8, 9, 10, ...
+
+What:		/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats
+		/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/turbo_stat
+		/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/sub_turbo_stat
+		/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/unthrottle
+		/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/powercap
+		/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/overtemp
+		/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/supply_fault
+		/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/overcurrent
+		/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/occ_reset
+Date:		March 2016
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+		Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	POWERNV CPUFreq driver's frequency throttle stats directory and
+		attributes
+
+		'cpuX/cpufreq/throttle_stats' directory contains the CPU frequency
+		throttle stat attributes for the chip. The throttle stats of a cpu
+		is common across all the cpus belonging to a chip. Below are the
+		throttle attributes exported in the 'throttle_stats' directory:
+
+		- turbo_stat : This file gives the total number of times the max
+		frequency is throttled to lower frequency in turbo (at and above
+		nominal frequency) range of frequencies.
+
+		- sub_turbo_stat : This file gives the total number of times the
+		max frequency is throttled to lower frequency in sub-turbo(below
+		nominal frequency) range of frequencies.
+
+		- unthrottle : This file gives the total number of times the max
+		frequency is unthrottled after being throttled.
+
+		- powercap : This file gives the total number of times the max
+		frequency is throttled due to 'Power Capping'.
+
+		- overtemp : This file gives the total number of times the max
+		frequency is throttled due to 'CPU Over Temperature'.
+
+		- supply_fault : This file gives the total number of times the
+		max frequency is throttled due to 'Power Supply Failure'.
+
+		- overcurrent : This file gives the total number of times the
+		max frequency is throttled due to 'Overcurrent'.
+
+		- occ_reset : This file gives the total number of times the max
+		frequency is throttled due to 'OCC Reset'.
+
+		The sysfs attributes representing different throttle reasons like
+		powercap, overtemp, supply_fault, overcurrent and occ_reset map to
+		the reasons provided by OCC firmware for throttling the frequency.
+
+What:		/sys/devices/system/cpu/cpufreq/policyX/throttle_stats
+		/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/turbo_stat
+		/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/sub_turbo_stat
+		/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/unthrottle
+		/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/powercap
+		/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/overtemp
+		/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/supply_fault
+		/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/overcurrent
+		/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/occ_reset
+Date:		March 2016
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+		Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	POWERNV CPUFreq driver's frequency throttle stats directory and
+		attributes
+
+		'policyX/throttle_stats' directory and all the attributes are same as
+		the /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats directory and
+		attributes which give the frequency throttle information of the chip.
+
+What:		/sys/devices/system/cpu/cpuX/regs/
+		/sys/devices/system/cpu/cpuX/regs/identification/
+		/sys/devices/system/cpu/cpuX/regs/identification/midr_el1
+		/sys/devices/system/cpu/cpuX/regs/identification/revidr_el1
+Date:		June 2016
+Contact:	Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org>
+Description:	AArch64 CPU registers
+		'identification' directory exposes the CPU ID registers for
+		 identifying model and revision of the CPU.
+
+What:		/sys/devices/system/cpu/cpu#/cpu_capacity
+Date:		December 2016
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	information about CPUs heterogeneity.
+
+		cpu_capacity: capacity of cpu#.
+
+What:		/sys/devices/system/cpu/vulnerabilities
+		/sys/devices/system/cpu/vulnerabilities/meltdown
+		/sys/devices/system/cpu/vulnerabilities/spectre_v1
+		/sys/devices/system/cpu/vulnerabilities/spectre_v2
+		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
+		/sys/devices/system/cpu/vulnerabilities/l1tf
+		/sys/devices/system/cpu/vulnerabilities/mds
+		/sys/devices/system/cpu/vulnerabilities/srbds
+		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
+		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
+Date:		January 2018
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Information about CPU vulnerabilities
+
+		The files are named after the code names of CPU
+		vulnerabilities. The output of those files reflects the
+		state of the CPUs in the system. Possible output values:
+
+		"Not affected"	  CPU is not affected by the vulnerability
+		"Vulnerable"	  CPU is affected and no mitigation in effect
+		"Mitigation: $M"  CPU is affected and mitigation $M is in effect
+
+		See also: Documentation/admin-guide/hw-vuln/index.rst
+
+What:		/sys/devices/system/cpu/smt
+		/sys/devices/system/cpu/smt/active
+		/sys/devices/system/cpu/smt/control
+Date:		June 2018
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Control Symetric Multi Threading (SMT)
+
+		active:  Tells whether SMT is active (enabled and siblings online)
+
+		control: Read/write interface to control SMT. Possible
+			 values:
+
+			 "on"		SMT is enabled
+			 "off"		SMT is disabled
+			 "forceoff"	SMT is force disabled. Cannot be changed.
+			 "notsupported" SMT is not supported by the CPU
+
+			 If control status is "forceoff" or "notsupported" writes
+			 are rejected.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl
new file mode 100644
index 0000000..470def0
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl
@@ -0,0 +1,22 @@
+What:           /sys/devices/system/ibm_rtl/state
+Date:           Sep 2010
+KernelVersion:  2.6.37
+Contact:        Vernon Mauery <vernux@us.ibm.com>
+Description:    The state file allows a means by which to change in and
+                out of Premium Real-Time Mode (PRTM), as well as the
+                ability to query the current state.
+                    0 => PRTM off
+                    1 => PRTM enabled
+Users:          The ibm-prtm userspace daemon uses this interface.
+
+
+What:           /sys/devices/system/ibm_rtl/version
+Date:           Sep 2010
+KernelVersion:  2.6.37
+Contact:        Vernon Mauery <vernux@us.ibm.com>
+Description:    The version file provides a means by which to query
+                the RTL table version that lives in the Extended
+                BIOS Data Area (EBDA).
+Users:          The ibm-prtm userspace daemon uses this interface.
+
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-system-xen_cpu b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-system-xen_cpu
new file mode 100644
index 0000000..9ca02fb
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-devices-system-xen_cpu
@@ -0,0 +1,20 @@
+What:		/sys/devices/system/xen_cpu/
+Date:		May 2012
+Contact:	Liu, Jinsong <jinsong.liu@intel.com>
+Description:
+		A collection of global/individual Xen physical cpu attributes
+
+		Individual physical cpu attributes are contained in
+		subdirectories named by the Xen's logical cpu number, e.g.:
+		/sys/devices/system/xen_cpu/xen_cpu#/
+
+
+What:		/sys/devices/system/xen_cpu/xen_cpu#/online
+Date:		May 2012
+Contact:	Liu, Jinsong <jinsong.liu@intel.com>
+Description:
+		Interface to online/offline Xen physical cpus
+
+		When running under Xen platform, it provide user interface
+		to online/offline physical cpus, except cpu0 due to several
+		logic restrictions and assumptions.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-altera-cvp b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-altera-cvp
new file mode 100644
index 0000000..8cde64a
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-altera-cvp
@@ -0,0 +1,8 @@
+What:		/sys/bus/pci/drivers/altera-cvp/chkcfg
+Date:		May 2017
+Kernel Version:	4.13
+Contact:	Anatolij Gustschin <agust@denx.de>
+Description:
+		Contains either 1 or 0 and controls if configuration
+		error checking in altera-cvp driver is turned on or
+		off.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-genwqe b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-genwqe
new file mode 100644
index 0000000..64ac6d5
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-genwqe
@@ -0,0 +1,71 @@
+What:           /sys/class/genwqe/genwqe<n>_card/version
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Unique bitstream identification e.g.
+                '0000000330336283.00000000475a4950'.
+
+What:           /sys/class/genwqe/genwqe<n>_card/appid
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Identifies the currently active card application e.g. 'GZIP'
+                for compression/decompression.
+
+What:           /sys/class/genwqe/genwqe<n>_card/type
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Type of the card e.g. 'GenWQE5-A7'.
+
+What:           /sys/class/genwqe/genwqe<n>_card/curr_bitstream
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Currently active bitstream. 1 is default, 0 is backup.
+
+What:           /sys/class/genwqe/genwqe<n>_card/next_bitstream
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Interface to set the next bitstream to be used.
+
+What:           /sys/class/genwqe/genwqe<n>_card/reload_bitstream
+Date:           May 2014
+Contact:        klebers@linux.vnet.ibm.com
+Description:    Interface to trigger a PCIe card reset to reload the bitstream.
+                  sudo sh -c 'echo 1 > \
+                    /sys/class/genwqe/genwqe0_card/reload_bitstream'
+                If successfully, the card will come back with the bitstream set
+                on 'next_bitstream'.
+
+What:           /sys/class/genwqe/genwqe<n>_card/tempsens
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Interface to read the cards temperature sense register.
+
+What:           /sys/class/genwqe/genwqe<n>_card/freerunning_timer
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Interface to read the cards free running timer.
+                Used for performance and utilization measurements.
+
+What:           /sys/class/genwqe/genwqe<n>_card/queue_working_time
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Interface to read queue working time.
+                Used for performance and utilization measurements.
+
+What:           /sys/class/genwqe/genwqe<n>_card/state
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    State of the card: "unused", "used", "error".
+
+What:           /sys/class/genwqe/genwqe<n>_card/base_clock
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Base clock frequency of the card.
+
+What:           /sys/class/genwqe/genwqe<n>_card/device/sriov_numvfs
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Enable VFs (1..15):
+                  sudo sh -c 'echo 15 > \
+                    /sys/bus/pci/devices/0000\:1b\:00.0/sriov_numvfs'
+                Disable VFs:
+                  Write a 0 into the same sysfs entry.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid
new file mode 100644
index 0000000..48942ca
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid
@@ -0,0 +1,20 @@
+What:		For USB devices	: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/report_descriptor
+		For BT devices	: /sys/class/bluetooth/hci<addr>/<hid-bus>:<vendor-id>:<product-id>.<num>/report_descriptor
+		Symlink		: /sys/class/hidraw/hidraw<num>/device/report_descriptor
+Date:		Jan 2011
+KernelVersion:	2.0.39
+Contact:	Alan Ott <alan@signal11.us>
+Description:	When read, this file returns the device's raw binary HID
+		report descriptor.
+		This file cannot be written.
+Users:		HIDAPI library (http://www.signal11.us/oss/hidapi)
+
+What:		For USB devices	: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/country
+		For BT devices	: /sys/class/bluetooth/hci<addr>/<hid-bus>:<vendor-id>:<product-id>.<num>/country
+		Symlink		: /sys/class/hidraw/hidraw<num>/device/country
+Date:		February 2015
+KernelVersion:	3.19
+Contact:	Olivier Gay <ogay@logitech.com>
+Description:	When read, this file returns the hex integer value in ASCII
+		of the device's HID country code (e.g. 21 for US).
+		This file cannot be written.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-corsair b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-corsair
new file mode 100644
index 0000000..b8827f0
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-corsair
@@ -0,0 +1,15 @@
+What:		/sys/bus/drivers/corsair/<dev>/macro_mode
+Date:		August 2015
+KernelVersion:	4.2
+Contact:	Clement Vuchener <clement.vuchener@gmail.com>
+Description:	Get/set the current playback mode. "SW" for software mode
+		where G-keys triggers their regular key codes. "HW" for
+		hardware playback mode where the G-keys play their macro
+		from the on-board memory.
+
+
+What:		/sys/bus/drivers/corsair/<dev>/current_profile
+Date:		August 2015
+KernelVersion:	4.2
+Contact:	Clement Vuchener <clement.vuchener@gmail.com>
+Description:	Get/set the current selected profile. Values are from 1 to 3.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-lenovo b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-lenovo
new file mode 100644
index 0000000..53a0725
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-lenovo
@@ -0,0 +1,50 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/press_to_select
+Date:		July 2011
+Contact:	linux-input@vger.kernel.org
+Description:	This controls if mouse clicks should be generated if the trackpoint is quickly pressed. How fast this press has to be
+		is being controlled by press_speed.
+		Values are 0 or 1.
+		Applies to Thinkpad USB Keyboard with TrackPoint.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/dragging
+Date:		July 2011
+Contact:	linux-input@vger.kernel.org
+Description:	If this setting is enabled, it is possible to do dragging by pressing the trackpoint. This requires press_to_select to be enabled.
+		Values are 0 or 1.
+		Applies to Thinkpad USB Keyboard with TrackPoint.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/release_to_select
+Date:		July 2011
+Contact:	linux-input@vger.kernel.org
+Description:	For details regarding this setting please refer to http://www.pc.ibm.com/ww/healthycomputing/trkpntb.html
+		Values are 0 or 1.
+		Applies to Thinkpad USB Keyboard with TrackPoint.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/select_right
+Date:		July 2011
+Contact:	linux-input@vger.kernel.org
+Description:	This setting controls if the mouse click events generated by pressing the trackpoint (if press_to_select is enabled) generate
+		a left or right mouse button click.
+		Values are 0 or 1.
+		Applies to Thinkpad USB Keyboard with TrackPoint.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/sensitivity
+Date:		July 2011
+Contact:	linux-input@vger.kernel.org
+Description:	This file contains the trackpoint sensitivity.
+		Values are decimal integers from 1 (lowest sensitivity) to 255 (highest sensitivity).
+		Applies to Thinkpad USB Keyboard with TrackPoint.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/press_speed
+Date:		July 2011
+Contact:	linux-input@vger.kernel.org
+Description:	This setting controls how fast the trackpoint needs to be pressed to generate a mouse click if press_to_select is enabled.
+		Values are decimal integers from 1 (slowest) to 255 (fastest).
+		Applies to Thinkpad USB Keyboard with TrackPoint.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/fn_lock
+Date:		July 2014
+Contact:	linux-input@vger.kernel.org
+Description:	This setting controls whether Fn Lock is enabled on the keyboard (i.e. if F1 is Mute or F1)
+		Values are 0 or 1
+		Applies to ThinkPad Compact (USB|Bluetooth) Keyboard with TrackPoint.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff
new file mode 100644
index 0000000..305dffd
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff
@@ -0,0 +1,67 @@
+What:		/sys/bus/hid/drivers/logitech/<dev>/range
+Date:		July 2011
+KernelVersion:	3.2
+Contact:	Michal Malý <madcatxster@devoid-pointer.net>
+Description:	Display minimum, maximum and current range of the steering
+		wheel. Writing a value within min and max boundaries sets the
+		range of the wheel.
+
+What:		/sys/bus/hid/drivers/logitech/<dev>/alternate_modes
+Date:		Feb 2015
+KernelVersion:	4.1
+Contact:	Michal Malý <madcatxster@devoid-pointer.net>
+Description:	Displays a set of alternate modes supported by a wheel. Each
+		mode is listed as follows:
+		  Tag: Mode Name
+		Currently active mode is marked with an asterisk. List also
+		contains an abstract item "native" which always denotes the
+		native mode of the wheel. Echoing the mode tag switches the
+		wheel into the corresponding mode. Depending on the exact model
+		of the wheel not all listed modes might always be selectable.
+		If a wheel cannot be switched into the desired mode, -EINVAL
+		is returned accompanied with an explanatory message in the
+		kernel log.
+		This entry is not created for devices that have only one mode.
+
+		Currently supported mode switches:
+		Driving Force Pro:
+		  DF-EX --> DFP
+
+		G25:
+		  DF-EX --> DFP --> G25
+
+		G27:
+		  DF-EX <*> DFP <-> G25 <-> G27
+		  DF-EX <*--------> G25 <-> G27
+		  DF-EX <*----------------> G27
+
+		G29:
+		  DF-EX <*> DFP <-> G25 <-> G27 <-> G29
+		  DF-EX <*--------> G25 <-> G27 <-> G29
+		  DF-EX <*----------------> G27 <-> G29
+		  DF-EX <*------------------------> G29
+
+		DFGT:
+		  DF-EX <*> DFP <-> DFGT
+		  DF-EX <*--------> DFGT
+
+		* hid_logitech module must be loaded with lg4ff_no_autoswitch=1
+		  parameter set in order for the switch to DF-EX mode to work.
+
+What:		/sys/bus/hid/drivers/logitech/<dev>/real_id
+Date:		Feb 2015
+KernelVersion:	4.1
+Contact:	Michal Malý <madcatxster@devoid-pointer.net>
+Description:	Displays the real model of the wheel regardless of any
+		alternate mode the wheel might be switched to.
+		It is a read-only value.
+		This entry is not created for devices that have only one mode.
+
+What:		/sys/bus/hid/drivers/logitech/<dev>/combine_pedals
+Date:		Sep 2016
+KernelVersion:	4.9
+Contact:	Simon Wood <simon@mungewell.org>
+Description:	Controls whether a combined value of accelerator and brake is
+		reported on the Y axis of the controller. Useful for older games
+		which can do not work with separate accelerator/brake axis.
+		Off ('0') by default, enabled by setting '1'.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-multitouch b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-multitouch
new file mode 100644
index 0000000..f79839d
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-multitouch
@@ -0,0 +1,9 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/quirks
+Date:		November 2011
+Contact:	Benjamin Tissoires <benjamin.tissoires@gmail.com>
+Description:	The integer value of this attribute corresponds to the
+		quirks actually in place to handle the device's protocol.
+		When read, this attribute returns the current settings (see
+		MT_QUIRKS_* in hid-multitouch.c).
+		When written this attribute change on the fly the quirks, then
+		the protocol to handle the device.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-picolcd b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-picolcd
new file mode 100644
index 0000000..98fd81a
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-picolcd
@@ -0,0 +1,43 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/operation_mode
+Date:		March 2010
+Contact:	Bruno Prémont <bonbons@linux-vserver.org>
+Description:	Make it possible to switch the PicoLCD device between LCD
+		(firmware) and bootloader (flasher) operation modes.
+
+		Reading: returns list of available modes, the active mode being
+		enclosed in brackets ('[' and ']')
+
+		Writing: causes operation mode switch. Permitted values are
+		the non-active mode names listed when read.
+
+		Note: when switching mode the current PicoLCD HID device gets
+		disconnected and reconnects after above delay (see attribute
+		operation_mode_delay for its value).
+
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/operation_mode_delay
+Date:		April 2010
+Contact:	Bruno Prémont <bonbons@linux-vserver.org>
+Description:	Delay PicoLCD waits before restarting in new mode when
+		operation_mode has changed.
+
+		Reading/Writing: It is expressed in ms and permitted range is
+		0..30000ms.
+
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/fb_update_rate
+Date:		March 2010
+Contact:	Bruno Prémont <bonbons@linux-vserver.org>
+Description:	Make it possible to adjust defio refresh rate.
+
+		Reading: returns list of available refresh rates (expressed in Hz),
+		the active refresh rate being enclosed in brackets ('[' and ']')
+
+		Writing: accepts new refresh rate expressed in integer Hz
+		within permitted rates.
+
+		Note: As device can barely do 2 complete refreshes a second
+		it only makes sense to adjust this value if only one or two
+		tiles get changed and it's not appropriate to expect the application
+		to flush its tiny changes explicitly at higher than default rate.
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-prodikeys b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-prodikeys
new file mode 100644
index 0000000..05d988c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-prodikeys
@@ -0,0 +1,29 @@
+What:		/sys/bus/hid/drivers/prodikeys/.../channel
+Date:		April 2010
+KernelVersion:	2.6.34
+Contact:	Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+		Allows control (via software) the midi channel to which
+		that the pc-midi keyboard will output.midi data.
+		Range: 0..15
+		Type:  Read/write
+What:		/sys/bus/hid/drivers/prodikeys/.../sustain
+Date:		April 2010
+KernelVersion:	2.6.34
+Contact:	Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+		Allows control (via software) the sustain duration of a
+		note held by the pc-midi driver.
+		0 means sustain mode is disabled.
+		Range: 0..5000 (milliseconds)
+		Type:  Read/write
+What:		/sys/bus/hid/drivers/prodikeys/.../octave
+Date:		April 2010
+KernelVersion:	2.6.34
+Contact:	Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+		Controls the octave shift modifier in the pc-midi driver.
+		The octave can be shifted via software up/down 2 octaves.
+		0 means the no ocatve shift.
+		Range: -2..2 (minus 2 to plus 2)
+		Type: Read/Write
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
new file mode 100644
index 0000000..3ca3971
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
@@ -0,0 +1,106 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/actual_dpi
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	It is possible to switch the dpi setting of the mouse with the
+		press of a button.
+		When read, this file returns the raw number of the actual dpi
+		setting reported by the mouse. This number has to be further
+		processed to receive the real dpi value.
+
+		VALUE DPI
+		1     800
+		2     1200
+		3     1600
+		4     2000
+		5     2400
+		6     3200
+
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/actual_profile
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the number of the actual profile.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/firmware_version
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 138 means 1.38
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/profile[1-5]
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+                press of a button. A profile holds information like button
+                mappings, sensitivity, the colors of the 5 leds and light
+                effects.
+                When read, these files return the respective profile. The
+                returned data is 975 bytes in size.
+		When written, this file lets one write the respective profile
+		data back to the mouse. The data has to be 975 bytes long.
+		The mouse will reject invalid data, whereas the profile number
+		stored in the profile doesn't need to fit the number of the
+		store.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/settings
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the settings stored in the mouse.
+		The size of the data is 36 bytes and holds information like the
+		startup_profile, tcu state and calibration_data.
+		When written, this file lets write settings back to the mouse.
+		The data has to be 36 bytes long. The mouse will reject invalid
+		data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/startup_profile
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1 to 5.
+                When read, this attribute returns the number of the profile
+                that's active when the mouse is powered on.
+		When written, this file sets the number of the startup profile
+		and the mouse activates this profile immediately.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/tcu
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a "Tracking Control Unit" which lets the user
+		calibrate the laser power to fit the mousepad surface.
+		When read, this file returns the current state of the TCU,
+		where 0 means off and 1 means on.
+		Writing 0 in this file will switch the TCU off.
+		Writing 1 in this file will start the calibration which takes
+		around 6 seconds to complete and activates the TCU.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/weight
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can be equipped with one of four supplied weights
+		ranging from 5 to 20 grams which are recognized by the mouse
+		and its value can be read out. When read, this file returns the
+		raw value returned by the mouse which eases further processing
+		in other software.
+		The values map to the weights as follows:
+
+		VALUE WEIGHT
+		0     none
+		1     5g
+		2     10g
+		3     15g
+		4     20g
+
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-srws1 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-srws1
new file mode 100644
index 0000000..d0eba70
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-srws1
@@ -0,0 +1,21 @@
+What:		/sys/class/leds/SRWS1::<serial>::RPM1
+What:		/sys/class/leds/SRWS1::<serial>::RPM2
+What:		/sys/class/leds/SRWS1::<serial>::RPM3
+What:		/sys/class/leds/SRWS1::<serial>::RPM4
+What:		/sys/class/leds/SRWS1::<serial>::RPM5
+What:		/sys/class/leds/SRWS1::<serial>::RPM6
+What:		/sys/class/leds/SRWS1::<serial>::RPM7
+What:		/sys/class/leds/SRWS1::<serial>::RPM8
+What:		/sys/class/leds/SRWS1::<serial>::RPM9
+What:		/sys/class/leds/SRWS1::<serial>::RPM10
+What:		/sys/class/leds/SRWS1::<serial>::RPM11
+What:		/sys/class/leds/SRWS1::<serial>::RPM12
+What:		/sys/class/leds/SRWS1::<serial>::RPM13
+What:		/sys/class/leds/SRWS1::<serial>::RPM14
+What:		/sys/class/leds/SRWS1::<serial>::RPM15
+What:		/sys/class/leds/SRWS1::<serial>::RPMALL
+Date:		Jan 2013
+KernelVersion:	3.9
+Contact:	Simon Wood <simon@mungewell.org>
+Description:	Provides a control for turning on/off the LEDs which form
+		an RPM meter on the front of the controller
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-wiimote b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-wiimote
new file mode 100644
index 0000000..39dfa5c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-hid-wiimote
@@ -0,0 +1,77 @@
+What:		/sys/bus/hid/drivers/wiimote/<dev>/led1
+What:		/sys/bus/hid/drivers/wiimote/<dev>/led2
+What:		/sys/bus/hid/drivers/wiimote/<dev>/led3
+What:		/sys/bus/hid/drivers/wiimote/<dev>/led4
+Date:		July 2011
+KernelVersion:	3.1
+Contact:	David Herrmann <dh.herrmann@googlemail.com>
+Description:	Make it possible to set/get current led state. Reading from it
+		returns 0 if led is off and 1 if it is on. Writing 0 to it
+		disables the led, writing 1 enables it.
+
+What:		/sys/bus/hid/drivers/wiimote/<dev>/extension
+Date:		August 2011
+KernelVersion:	3.2
+Contact:	David Herrmann <dh.herrmann@gmail.com>
+Description:	This file contains the currently connected and initialized
+		extensions. It can be one of: none, motionp, nunchuck, classic,
+		motionp+nunchuck, motionp+classic
+		motionp is the official Nintendo Motion+ extension, nunchuck is
+		the official Nintendo Nunchuck extension and classic is the
+		Nintendo Classic Controller extension. The motionp extension can
+		be combined with the other two.
+		Starting with kernel-version 3.11 Motion Plus hotplugging is
+		supported and if detected, it's no longer reported as static
+		extension. You will get uevent notifications for the motion-plus
+		device then.
+
+What:		/sys/bus/hid/drivers/wiimote/<dev>/devtype
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	David Herrmann <dh.herrmann@gmail.com>
+Description:	While a device is initialized by the wiimote driver, we perform
+		a device detection and signal a "change" uevent after it is
+		done. This file shows the detected device type. "pending" means
+		that the detection is still ongoing, "unknown" means, that the
+		device couldn't be detected or loaded. "generic" means, that the
+		device couldn't be detected but supports basic Wii Remote
+		features and can be used.
+		Other strings for each device-type are available and may be
+		added if new device-specific detections are added.
+		Currently supported are:
+			gen10: First Wii Remote generation
+			gen20: Second Wii Remote Plus generation (builtin MP)
+			balanceboard: Wii Balance Board
+
+What:		/sys/bus/hid/drivers/wiimote/<dev>/bboard_calib
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	David Herrmann <dh.herrmann@gmail.com>
+Description:	This attribute is only provided if the device was detected as a
+		balance board. It provides a single line with 3 calibration
+		values for all 4 sensors. The values are separated by colons and
+		are each 2 bytes long (encoded as 4 digit hexadecimal value).
+		First, 0kg values for all 4 sensors are written, followed by the
+		17kg values for all 4 sensors and last the 34kg values for all 4
+		sensors.
+		Calibration data is already applied by the kernel to all input
+		values but may be used by user-space to perform other
+		transformations.
+
+What:		/sys/bus/hid/drivers/wiimote/<dev>/pro_calib
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	David Herrmann <dh.herrmann@gmail.com>
+Description:	This attribute is only provided if the device was detected as a
+		pro-controller. It provides a single line with 4 calibration
+		values for all 4 analog sticks. Format is: "x1:y1 x2:y2". Data
+		is prefixed with a +/-. Each value is a signed 16bit number.
+		Data is encoded as decimal numbers and specifies the offsets of
+		the analog sticks of the pro-controller.
+		Calibration data is already applied by the kernel to all input
+		values but may be used by user-space to perform other
+		transformations.
+		Calibration data is detected by the kernel during device setup.
+		You can write "scan\n" into this file to re-trigger calibration.
+		You can also write data directly in the form "x1:y1 x2:y2" to
+		set the calibration values manually.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-input-axp-pek b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-input-axp-pek
new file mode 100644
index 0000000..a5e671b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-input-axp-pek
@@ -0,0 +1,11 @@
+What:		/sys/class/input/input(x)/device/startup
+Date:		March 2014
+Contact:	Carlo Caione <carlo@caione.org>
+Description:	Startup time in us. Board is powered on if the button is pressed
+		for more than <startup_time>
+
+What:		/sys/class/input/input(x)/device/shutdown
+Date:		March 2014
+Contact:	Carlo Caione <carlo@caione.org>
+Description:	Shutdown time in us. Board is powered off if the button is pressed
+		for more than <shutdown_time>
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-intel-rapid-start b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-intel-rapid-start
new file mode 100644
index 0000000..5a7d2e2
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-intel-rapid-start
@@ -0,0 +1,21 @@
+What:		/sys/bus/acpi/intel-rapid-start/wakeup_events
+Date:		July 2, 2013
+KernelVersion:	3.11
+Contact:	Matthew Garrett <mjg59@srcf.ucam.org>
+Description:	An integer representing a set of wakeup events as follows:
+		1: Wake to enter hibernation when the wakeup timer expires
+		2: Wake to enter hibernation when the battery reaches a
+		critical level
+
+		These values are ORed together. For example, a value of 3
+		indicates that the system will wake to enter hibernation when
+		either the wakeup timer expires or the battery reaches a
+		critical level.
+
+What:		/sys/bus/acpi/intel-rapid-start/wakeup_time
+Date:		July 2, 2013
+KernelVersion:	3.11
+Contact:	Matthew Garrett <mjg59@srcf.ucam.org>
+Description:	An integer representing the length of time the system will
+		remain asleep before waking up to enter hibernation.
+		This value is in minutes.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-pciback b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-pciback
new file mode 100644
index 0000000..6a733bf
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-pciback
@@ -0,0 +1,13 @@
+What:           /sys/bus/pci/drivers/pciback/quirks
+Date:           Oct 2011
+KernelVersion:  3.1
+Contact:        xen-devel@lists.xenproject.org
+Description:
+                If the permissive attribute is set, then writing a string in
+                the format of DDDD:BB:DD.F-REG:SIZE:MASK will allow the guest
+                to write and read from the PCI device. That is Domain:Bus:
+                Device.Function-Register:Size:Mask (Domain is optional).
+                For example:
+                #echo 00:19.0-E0:2:FF > /sys/bus/pci/drivers/pciback/quirks
+                will allow the guest to read and write to the configuration
+                register 0x0E.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-ppi b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-ppi
new file mode 100644
index 0000000..9921ef2
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-ppi
@@ -0,0 +1,75 @@
+What:		/sys/class/tpm/tpmX/ppi/
+Date:		August 2012
+Kernel Version:	3.6
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This folder includes the attributes related with PPI (Physical
+		Presence Interface). Only if TPM is supported by BIOS, this
+		folder makes sense. The folder path can be got by command
+		'find /sys/ -name 'pcrs''. For the detail information of PPI,
+		please refer to the PPI specification from
+
+		http://www.trustedcomputinggroup.org/
+
+		In Linux 4.2 ppi was moved to the character device directory.
+		A symlink from tpmX/device/ppi to tpmX/ppi to provide backwards
+		compatibility.
+
+What:		/sys/class/tpm/tpmX/ppi/version
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the version of the PPI supported by the
+		platform.
+		This file is readonly.
+
+What:		/sys/class/tpm/tpmX/ppi/request
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the request for an operation to be
+		executed in the pre-OS environment. It is the only input from
+		the OS to the pre-OS environment. The request should be an
+		integer value range from 1 to 160, and 0 means no request.
+		This file can be read and written.
+
+What:		/sys/class/tpm/tpmX/ppi/response
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the response to the most recent operation
+		request it acted upon. The format is "<request> <response num>
+		: <response description>".
+		This file is readonly.
+
+What:		/sys/class/tpm/tpmX/ppi/transition_action
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the platform-specific action that should
+		take place in order to transition to the BIOS for execution of
+		a requested operation. The format is "<action num>: <action
+		description>".
+		This file is readonly.
+
+What:		/sys/class/tpm/tpmX/ppi/tcg_operations
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows whether it is allowed to request an
+		operation to be executed in the pre-OS environment by the BIOS
+		for the requests defined by TCG, i.e. requests from 1 to 22.
+		The format is "<request> <status num>: <status description>".
+		This attribute is only supported by PPI version 1.2+.
+		This file is readonly.
+
+What:		/sys/class/tpm/tpmX/ppi/vs_operations
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows whether it is allowed to request an
+		operation to be executed in the pre-OS environment by the BIOS
+		for the verdor specific requests, i.e. requests from 128 to
+		255. The format is same with tcg_operations. This attribute
+		is also only supported by PPI version 1.2+.
+		This file is readonly.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-samsung-laptop b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-samsung-laptop
new file mode 100644
index 0000000..63c1ad0
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-samsung-laptop
@@ -0,0 +1,45 @@
+What:		/sys/devices/platform/samsung/performance_level
+Date:		January 1, 2010
+KernelVersion:	2.6.33
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:	Some Samsung laptops have different "performance levels"
+		that are can be modified by a function key, and by this
+		sysfs file.  These values don't always make a whole lot
+		of sense, but some users like to modify them to keep
+		their fans quiet at all costs.  Reading from this file
+		will show the current performance level.  Writing to the
+		file can change this value.
+			Valid options:
+				"silent"
+				"normal"
+				"overclock"
+		Note that not all laptops support all of these options.
+		Specifically, not all support the "overclock" option,
+		and it's still unknown if this value even changes
+		anything, other than making the user feel a bit better.
+
+What:		/sys/devices/platform/samsung/battery_life_extender
+Date:		December 1, 2011
+KernelVersion:	3.3
+Contact:	Corentin Chary <corentin.chary@gmail.com>
+Description:	Max battery charge level can be modified, battery cycle
+		life can be extended by reducing the max battery charge
+		level.
+		0 means normal battery mode (100% charge)
+		1 means battery life extender mode (80% charge)
+
+What:		/sys/devices/platform/samsung/usb_charge
+Date:		December 1, 2011
+KernelVersion:	3.3
+Contact:	Corentin Chary <corentin.chary@gmail.com>
+Description:	Use your USB ports to charge devices, even
+		when your laptop is powered off.
+		1 means enabled, 0 means disabled.
+
+What:		/sys/devices/platform/samsung/lid_handling
+Date:		December 11, 2014
+KernelVersion:	3.19
+Contact:	Julijonas Kikutis <julijonas.kikutis@gmail.com>
+Description:	Some Samsung laptops handle lid closing quicker and
+		only handle lid opening with this mode enabled.
+		1 means enabled, 0 means disabled.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-st b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-st
new file mode 100644
index 0000000..ba5d770
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-st
@@ -0,0 +1,12 @@
+What:		/sys/bus/scsi/drivers/st/debug_flag
+Date:		October 2015
+Kernel Version:	?.?
+Contact:	shane.seymour@hpe.com
+Description:
+		This file allows you to turn debug output from the st driver
+		off if you write a '0' to the file or on if you write a '1'.
+		Note that debug output requires that the module be compiled
+		with the #define DEBUG set to a non-zero value (this is the
+		default). If DEBUG is set to 0 then this file will not
+		appear in sysfs as its presence is conditional upon debug
+		output support being compiled into the module.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-tegra-fuse b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-tegra-fuse
new file mode 100644
index 0000000..69f5af6
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-tegra-fuse
@@ -0,0 +1,11 @@
+What:		/sys/devices/*/<our-device>/fuse
+Date:		February 2014
+Contact:	Peter De Schrijver <pdeschrijver@nvidia.com>
+Description:	read-only access to the efuses on Tegra20, Tegra30, Tegra114
+		and Tegra124 SoC's from NVIDIA. The efuses contain write once
+		data programmed at the factory. The data is layed out in 32bit
+		words in LSB first format. Each bit represents a single value
+		as decoded from the fuse registers. Bits order/assignment
+		exactly matches the HW registers, including any unused bits.
+Users:		any user space application which wants to read the efuses on
+		Tegra SoC's
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-toshiba_acpi b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
new file mode 100644
index 0000000..f34221b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
@@ -0,0 +1,197 @@
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_backlight_mode
+Date:		June 8, 2014
+KernelVersion:	3.15
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the keyboard backlight operation mode, valid
+		values are:
+			* 0x1  -> FN-Z
+			* 0x2  -> AUTO (also called TIMER)
+			* 0x8  -> ON
+			* 0x10 -> OFF
+		Note that from kernel 3.16 onwards this file accepts all listed
+		parameters, kernel 3.15 only accepts the first two (FN-Z and
+		AUTO).
+		Also note that toggling this value on type 1 devices, requires
+		a reboot for changes to take effect.
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_backlight_timeout
+Date:		June 8, 2014
+KernelVersion:	3.15
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the timeout of the keyboard backlight
+		whenever the operation mode is set to AUTO (or TIMER),
+		valid values range from 0-60.
+		Note that the kernel 3.15 only had support for the first
+		keyboard type, the kernel 3.16 added support for the second
+		type and the range accepted for type 2 is 1-60.
+		See the entry named "kbd_type"
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/position
+Date:		June 8, 2014
+KernelVersion:	3.15
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file shows the absolute position of the built-in
+		accelereometer.
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/touchpad
+Date:		June 8, 2014
+KernelVersion:	3.15
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This files controls the status of the touchpad and pointing
+		stick (if available), valid values are:
+			* 0 -> OFF
+			* 1 -> ON
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/available_kbd_modes
+Date:		August 3, 2014
+KernelVersion:	3.16
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file shows the supported keyboard backlight modes
+		the system supports, which can be:
+			* 0x1  -> FN-Z
+			* 0x2  -> AUTO (also called TIMER)
+			* 0x8  -> ON
+			* 0x10 -> OFF
+		Note that not all keyboard types support the listed modes.
+		See the entry named "available_kbd_modes"
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_type
+Date:		August 3, 2014
+KernelVersion:	3.16
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file shows the current keyboard backlight type,
+		which can be:
+			* 1 -> Type 1, supporting modes FN-Z and AUTO
+			* 2 -> Type 2, supporting modes TIMER, ON and OFF
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_sleep_charge
+Date:		January 23, 2015
+KernelVersion:	4.0
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the USB Sleep & Charge charging mode, which
+		can be:
+			* 0 -> Disabled		(0x00)
+			* 1 -> Alternate	(0x09)
+			* 2 -> Auto		(0x21)
+			* 3 -> Typical		(0x11)
+		Note that from kernel 4.1 onwards this file accepts all listed
+		values, kernel 4.0 only supports the first three.
+		Note that this feature only works when connected to power, if
+		you want to use it under battery, see the entry named
+		"sleep_functions_on_battery"
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/sleep_functions_on_battery
+Date:		January 23, 2015
+KernelVersion:	4.0
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the USB Sleep Functions under battery, and
+		set the level at which point they will be disabled, accepted
+		values can be:
+			* 0	-> Disabled
+			* 1-100	-> Battery level to disable sleep functions
+		Currently it prints two values, the first one indicates if the
+		feature is enabled or disabled, while the second one shows the
+		current battery level set.
+		Note that when the value is set to disabled, the sleep function
+		will only work when connected to power.
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_rapid_charge
+Date:		January 23, 2015
+KernelVersion:	4.0
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the USB Rapid Charge state, which can be:
+			* 0 -> Disabled
+			* 1 -> Enabled
+		Note that toggling this value requires a reboot for changes to
+		take effect.
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_sleep_music
+Date:		January 23, 2015
+KernelVersion:	4.0
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the Sleep & Music state, which values can be:
+			* 0 -> Disabled
+			* 1 -> Enabled
+		Note that this feature only works when connected to power, if
+		you want to use it under battery, see the entry named
+		"sleep_functions_on_battery"
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/version
+Date:		February 12, 2015
+KernelVersion:	4.0
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file shows the current version of the driver
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/fan
+Date:		February 12, 2015
+KernelVersion:	4.0
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the state of the internal fan, valid
+		values are:
+			* 0 -> OFF
+			* 1 -> ON
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_function_keys
+Date:		February 12, 2015
+KernelVersion:	4.0
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the Special Functions (hotkeys) operation
+		mode, valid values are:
+			* 0 -> Normal Operation
+			* 1 -> Special Functions
+		In the "Normal Operation" mode, the F{1-12} keys are as usual
+		and the hotkeys are accessed via FN-F{1-12}.
+		In the "Special Functions" mode, the F{1-12} keys trigger the
+		hotkey and the F{1-12} keys are accessed via FN-F{1-12}.
+		Note that toggling this value requires a reboot for changes to
+		take effect.
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/panel_power_on
+Date:		February 12, 2015
+KernelVersion:	4.0
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls whether the laptop should turn ON whenever
+		the LID is opened, valid values are:
+			* 0 -> Disabled
+			* 1 -> Enabled
+		Note that toggling this value requires a reboot for changes to
+		take effect.
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_three
+Date:		February 12, 2015
+KernelVersion:	4.0
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the USB 3 functionality, valid values are:
+			* 0 -> Disabled (Acts as a regular USB 2)
+			* 1 -> Enabled (Full USB 3 functionality)
+		Note that toggling this value requires a reboot for changes to
+		take effect.
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/cooling_method
+Date:		2016
+KernelVersion:	4.6
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the Cooling Method feature.
+		Reading this file prints two values, the first is the actual cooling method
+		and the second is the maximum cooling method supported.
+		When the maximum cooling method is ONE, valid values are:
+			* 0 -> Maximum Performance
+			* 1 -> Battery Optimized
+		When the maximum cooling method is TWO, valid values are:
+			* 0 -> Maximum Performance
+			* 1 -> Performance
+			* 2 -> Battery Optimized
+Users:		KToshiba
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-toshiba_haps b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-toshiba_haps
new file mode 100644
index 0000000..a662370
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-toshiba_haps
@@ -0,0 +1,20 @@
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS620A:00/protection_level
+Date:		August 16, 2014
+KernelVersion:	3.17
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the built-in accelerometer protection level,
+		valid values are:
+			* 0 -> Disabled
+			* 1 -> Low
+			* 2 -> Medium
+			* 3 -> High
+		The default potection value is set to 2 (Medium).
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS620A:00/reset_protection
+Date:		August 16, 2014
+KernelVersion:	3.17
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file turns off the built-in accelerometer for a few
+		seconds and then restore normal operation. Accepting 1 as the
+		only parameter.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-wacom b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-wacom
new file mode 100644
index 0000000..2aa5503
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-wacom
@@ -0,0 +1,103 @@
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed
+Date:		April 2010
+Kernel Version:	2.6.35
+Contact:	linux-bluetooth@vger.kernel.org
+Description:
+		The /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed file
+		controls reporting speed of Wacom bluetooth tablet. Reading
+		from this file returns 1 if tablet reports in high speed mode
+		or 0 otherwise. Writing to this file one of these values
+		switches reporting speed.
+
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/led
+Date:		August 2014
+Contact:	linux-input@vger.kernel.org
+Description:
+		Attribute group for control of the status LEDs and the OLEDs.
+		This attribute group is only available for Intuos 4 M, L,
+		and XL (with LEDs and OLEDs), Intuos 4 WL, Intuos 5 (LEDs only),
+		Intuos Pro (LEDs only) and Cintiq 21UX2 and Cintiq 24HD
+		(LEDs only). Therefore its presence implicitly signifies the
+		presence of said LEDs and OLEDs on the tablet device.
+
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status0_luminance
+Date:		August 2014
+Contact:	linux-input@vger.kernel.org
+Description:
+		<obsoleted by the LED class API now exported by the driver>
+		Writing to this file sets the status LED luminance (1..127)
+		when the stylus does not touch the tablet surface, and no
+		button is pressed on the stylus. This luminance level is
+		normally lower than the level when a button is pressed.
+
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status1_luminance
+Date:		August 2014
+Contact:	linux-input@vger.kernel.org
+Description:
+		<obsoleted by the LED class API now exported by the driver>
+		Writing to this file sets the status LED luminance (1..127)
+		when the stylus touches the tablet surface, or any button is
+		pressed on the stylus.
+
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status_led0_select
+Date:		August 2014
+Contact:	linux-input@vger.kernel.org
+Description:
+		<obsoleted by the LED class API now exported by the driver>
+		Writing to this file sets which one of the four (for Intuos 4
+		and Intuos 5) or of the right four (for Cintiq 21UX2 and Cintiq
+		24HD) status LEDs is active (0..3). The other three LEDs on the
+		same side are always inactive.
+
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status_led1_select
+Date:		August 2014
+Contact:	linux-input@vger.kernel.org
+Description:
+		<obsoleted by the LED class API now exported by the driver>
+		Writing to this file sets which one of the left four (for Cintiq 21UX2
+		and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on
+		the left are always inactive.
+
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/buttons_luminance
+Date:		August 2014
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing to this file sets the overall luminance level (0..15)
+		of all eight button OLED displays.
+
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/button<n>_rawimg
+Date:		August 2014
+Contact:	linux-input@vger.kernel.org
+Description:
+		When writing a 1024 byte raw image in Wacom Intuos 4
+		interleaving format to the file, the image shows up on Button N
+		of the device. The image is a 64x32 pixel 4-bit gray image. The
+		1024 byte binary is split up into 16x 64 byte chunks. Each 64
+		byte chunk encodes the image data for two consecutive lines on
+		the display. The low nibble of each byte contains the first
+		line, and the high nibble contains the second line.
+		When the Wacom Intuos 4 is connected over Bluetooth, the
+		image has to contain 256 bytes (64x32 px 1 bit colour).
+		The format is also scrambled, like in the USB mode, and it can
+		be summarized by converting 76543210 into GECA6420.
+					    HGFEDCBA      HFDB7531
+
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/unpair_remote
+Date:		July 2015
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing the character sequence '*' followed by a newline to
+		this file will delete all of the current pairings on the
+		device. Other character sequences are reserved. This file is
+		write only.
+
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/<serial_number>/remote_mode
+Date:		July 2015
+Contact:	linux-input@vger.kernel.org
+Description:
+		<obsoleted by the LED class API now exported by the driver>
+		Reading from this file reports the mode status of the
+		remote as indicated by the LED lights on the device. If no
+		reports have been received from the paired device, reading
+		from this file will report '-1'. The mode is read-only
+		and cannot be set through the driver.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-xen-blkback b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-xen-blkback
new file mode 100644
index 0000000..8bb43b6
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-xen-blkback
@@ -0,0 +1,17 @@
+What:           /sys/module/xen_blkback/parameters/max_buffer_pages
+Date:           March 2013
+KernelVersion:  3.11
+Contact:        Roger Pau Monné <roger.pau@citrix.com>
+Description:
+                Maximum number of free pages to keep in each block
+                backend buffer.
+
+What:           /sys/module/xen_blkback/parameters/max_persistent_grants
+Date:           March 2013
+KernelVersion:  3.11
+Contact:        Roger Pau Monné <roger.pau@citrix.com>
+Description:
+                Maximum number of grants to map persistently in
+                blkback. If the frontend tries to use more than
+                max_persistent_grants, the LRU kicks in and starts
+                removing 5% of max_persistent_grants every 100ms.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-xen-blkfront b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-xen-blkfront
new file mode 100644
index 0000000..c0a6cb7
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-driver-xen-blkfront
@@ -0,0 +1,10 @@
+What:           /sys/module/xen_blkfront/parameters/max
+Date:           June 2013
+KernelVersion:  3.11
+Contact:        Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Maximum number of segments that the frontend will negotiate
+                with the backend for indirect descriptors. The default value
+                is 32 - higher value means more potential throughput but more
+                memory usage. The backend picks the minimum of the frontend
+                and its default backend value.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-acpi b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-acpi
new file mode 100644
index 0000000..613f42a
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-acpi
@@ -0,0 +1,196 @@
+What:		/sys/firmware/acpi/bgrt/
+Date:		January 2012
+Contact:	Matthew Garrett <mjg@redhat.com>
+Description:
+		The BGRT is an ACPI 5.0 feature that allows the OS
+		to obtain a copy of the firmware boot splash and
+		some associated metadata. This is intended to be used
+		by boot splash applications in order to interact with
+		the firmware boot splash in order to avoid jarring
+		transitions.
+
+		image: The image bitmap. Currently a 32-bit BMP.
+		status: 1 if the image is valid, 0 if firmware invalidated it.
+		type: 0 indicates image is in BMP format.
+		version: The version of the BGRT. Currently 1.
+		xoffset: The number of pixels between the left of the screen
+			 and the left edge of the image.
+		yoffset: The number of pixels between the top of the screen
+			 and the top edge of the image.
+
+What:		/sys/firmware/acpi/hotplug/
+Date:		February 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		There are separate hotplug profiles for different classes of
+		devices supported by ACPI, such as containers, memory modules,
+		processors, PCI root bridges etc.  A hotplug profile for a given
+		class of devices is a collection of settings defining the way
+		that class of devices will be handled by the ACPI core hotplug
+		code.  Those profiles are represented in sysfs as subdirectories
+		of /sys/firmware/acpi/hotplug/.
+
+		The following setting is available to user space for each
+		hotplug profile:
+
+		enabled: If set, the ACPI core will handle notifications of
+			hotplug events associated with the given class of
+			devices and will allow those devices to be ejected with
+			the help of the _EJ0 control method.  Unsetting it
+			effectively disables hotplug for the correspoinding
+			class of devices.
+
+		The value of the above attribute is an integer number: 1 (set)
+		or 0 (unset).  Attempts to write any other values to it will
+		cause -EINVAL to be returned.
+
+What:		/sys/firmware/acpi/interrupts/
+Date:		February 2008
+Contact:	Len Brown <lenb@kernel.org>
+Description:
+		All ACPI interrupts are handled via a single IRQ,
+		the System Control Interrupt (SCI), which appears
+		as "acpi" in /proc/interrupts.
+
+		However, one of the main functions of ACPI is to make
+		the platform understand random hardware without
+		special driver support.  So while the SCI handles a few
+		well known (fixed feature) interrupts sources, such
+		as the power button, it can also handle a variable
+		number of a "General Purpose Events" (GPE).
+
+		A GPE vectors to a specified handler in AML, which
+		can do a anything the BIOS writer wants from
+		OS context.  GPE 0x12, for example, would vector
+		to a level or edge handler called _L12 or _E12.
+		The handler may do its business and return.
+		Or the handler may send send a Notify event
+		to a Linux device driver registered on an ACPI device,
+		such as a battery, or a processor.
+
+		To figure out where all the SCI's are coming from,
+		/sys/firmware/acpi/interrupts contains a file listing
+		every possible source, and the count of how many
+		times it has triggered.
+
+		$ cd /sys/firmware/acpi/interrupts
+		$ grep . *
+		error:	     0
+		ff_gbl_lock:	   0   enable
+		ff_pmtimer:	  0  invalid
+		ff_pwr_btn:	  0   enable
+		ff_rt_clk:	 2  disable
+		ff_slp_btn:	  0  invalid
+		gpe00:	     0	invalid
+		gpe01:	     0	 enable
+		gpe02:	   108	 enable
+		gpe03:	     0	invalid
+		gpe04:	     0	invalid
+		gpe05:	     0	invalid
+		gpe06:	     0	 enable
+		gpe07:	     0	 enable
+		gpe08:	     0	invalid
+		gpe09:	     0	invalid
+		gpe0A:	     0	invalid
+		gpe0B:	     0	invalid
+		gpe0C:	     0	invalid
+		gpe0D:	     0	invalid
+		gpe0E:	     0	invalid
+		gpe0F:	     0	invalid
+		gpe10:	     0	invalid
+		gpe11:	     0	invalid
+		gpe12:	     0	invalid
+		gpe13:	     0	invalid
+		gpe14:	     0	invalid
+		gpe15:	     0	invalid
+		gpe16:	     0	invalid
+		gpe17:	  1084	 enable
+		gpe18:	     0	 enable
+		gpe19:	     0	invalid
+		gpe1A:	     0	invalid
+		gpe1B:	     0	invalid
+		gpe1C:	     0	invalid
+		gpe1D:	     0	invalid
+		gpe1E:	     0	invalid
+		gpe1F:	     0	invalid
+		gpe_all:    1192
+		sci:	1194
+		sci_not:     0	
+
+		sci - The number of times the ACPI SCI
+		has been called and claimed an interrupt.
+
+		sci_not - The number of times the ACPI SCI
+		has been called and NOT claimed an interrupt.
+
+		gpe_all - count of SCI caused by GPEs.
+
+		gpeXX - count for individual GPE source
+
+		ff_gbl_lock - Global Lock
+
+		ff_pmtimer - PM Timer
+
+		ff_pwr_btn - Power Button
+
+		ff_rt_clk - Real Time Clock
+
+		ff_slp_btn - Sleep Button
+
+		error - an interrupt that can't be accounted for above.
+
+		invalid: it's either a GPE or a Fixed Event that
+			doesn't have an event handler.
+
+		disable: the GPE/Fixed Event is valid but disabled.
+
+		enable: the GPE/Fixed Event is valid and enabled.
+
+		Root has permission to clear any of these counters.  Eg.
+		# echo 0 > gpe11
+
+		All counters can be cleared by clearing the total "sci":
+		# echo 0 > sci
+
+		None of these counters has an effect on the function
+		of the system, they are simply statistics.
+
+		Besides this, user can also write specific strings to these files
+		to enable/disable/clear ACPI interrupts in user space, which can be
+		used to debug some ACPI interrupt storm issues.
+
+		Note that only writing to VALID GPE/Fixed Event is allowed,
+		i.e. user can only change the status of runtime GPE and
+		Fixed Event with event handler installed.
+
+		Let's take power button fixed event for example, please kill acpid
+		and other user space applications so that the machine won't shutdown
+		when pressing the power button.
+		# cat ff_pwr_btn
+		0	enabled
+		# press the power button for 3 times;
+		# cat ff_pwr_btn
+		3	enabled
+		# echo disable > ff_pwr_btn
+		# cat ff_pwr_btn
+		3	disabled
+		# press the power button for 3 times;
+		# cat ff_pwr_btn
+		3	disabled
+		# echo enable > ff_pwr_btn
+		# cat ff_pwr_btn
+		4	enabled
+		/*
+		 * this is because the status bit is set even if the enable bit is cleared,
+		 * and it triggers an ACPI fixed event when the enable bit is set again
+		 */
+		# press the power button for 3 times;
+		# cat ff_pwr_btn
+		7	enabled
+		# echo disable > ff_pwr_btn
+		# press the power button for 3 times;
+		# echo clear > ff_pwr_btn	/* clear the status bit */
+		# echo disable > ff_pwr_btn
+		# cat ff_pwr_btn
+		7	enabled
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-dmi-entries b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-dmi-entries
new file mode 100644
index 0000000..210ad44
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-dmi-entries
@@ -0,0 +1,110 @@
+What:		/sys/firmware/dmi/entries/
+Date:		February 2011
+Contact:	Mike Waychison <mikew@google.com>
+Description:
+		Many machines' firmware (x86 and ia64) export DMI /
+		SMBIOS tables to the operating system.  Getting at this
+		information is often valuable to userland, especially in
+		cases where there are OEM extensions used.
+
+		The kernel itself does not rely on the majority of the
+		information in these tables being correct.  It equally
+		cannot ensure that the data as exported to userland is
+		without error either.
+
+		DMI is structured as a large table of entries, where
+		each entry has a common header indicating the type and
+		length of the entry, as well as a firmware-provided
+		'handle' that is supposed to be unique amongst all
+		entries.
+
+		Some entries are required by the specification, but many
+		others are optional.  In general though, users should
+		never expect to find a specific entry type on their
+		system unless they know for certain what their firmware
+		is doing.  Machine to machine experiences will vary.
+
+		Multiple entries of the same type are allowed.  In order
+		to handle these duplicate entry types, each entry is
+		assigned by the operating system an 'instance', which is
+		derived from an entry type's ordinal position.  That is
+		to say, if there are 'N' multiple entries with the same type
+		'T' in the DMI tables (adjacent or spread apart, it
+		doesn't matter), they will be represented in sysfs as
+		entries "T-0" through "T-(N-1)":
+
+		Example entry directories:
+
+			/sys/firmware/dmi/entries/17-0
+			/sys/firmware/dmi/entries/17-1
+			/sys/firmware/dmi/entries/17-2
+			/sys/firmware/dmi/entries/17-3
+			...
+
+		Instance numbers are used in lieu of the firmware
+		assigned entry handles as the kernel itself makes no
+		guarantees that handles as exported are unique, and
+		there are likely firmware images that get this wrong in
+		the wild.
+
+		Each DMI entry in sysfs has the common header values
+		exported as attributes:
+
+		handle	: The 16bit 'handle' that is assigned to this
+			  entry by the firmware.  This handle may be
+			  referred to by other entries.
+		length	: The length of the entry, as presented in the
+			  entry itself.  Note that this is _not the
+			  total count of bytes associated with the
+			  entry_.  This value represents the length of
+			  the "formatted" portion of the entry.  This
+			  "formatted" region is sometimes followed by
+			  the "unformatted" region composed of nul
+			  terminated strings, with termination signalled
+			  by a two nul characters in series.
+		raw	: The raw bytes of the entry. This includes the
+			  "formatted" portion of the entry, the
+			  "unformatted" strings portion of the entry,
+			  and the two terminating nul characters.
+		type	: The type of the entry.  This value is the same
+			  as found in the directory name.  It indicates
+			  how the rest of the entry should be interpreted.
+		instance: The instance ordinal of the entry for the
+			  given type.  This value is the same as found
+			  in the parent directory name.
+		position: The ordinal position (zero-based) of the entry
+			  within the entirety of the DMI entry table.
+
+		=== Entry Specialization ===
+
+		Some entry types may have other information available in
+		sysfs.  Not all types are specialized.
+
+		--- Type 15 - System Event Log ---
+
+		This entry allows the firmware to export a log of
+		events the system has taken.  This information is
+		typically backed by nvram, but the implementation
+		details are abstracted by this table.  This entry's data
+		is exported in the directory:
+
+		/sys/firmware/dmi/entries/15-0/system_event_log
+
+		and has the following attributes (documented in the
+		SMBIOS / DMI specification under "System Event Log (Type 15)":
+
+		area_length
+		header_start_offset
+		data_start_offset
+		access_method
+		status
+		change_token
+		access_method_address
+		header_format
+		per_log_type_descriptor_length
+		type_descriptors_supported_count
+
+		As well, the kernel exports the binary attribute:
+
+		raw_event_log	: The raw binary bits of the event log
+				  as described by the DMI entry.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-dmi-tables b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-dmi-tables
new file mode 100644
index 0000000..ff3cac8
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-dmi-tables
@@ -0,0 +1,22 @@
+What:		/sys/firmware/dmi/tables/
+Date:		April 2015
+Contact:	Ivan Khoronzhuk <ivan.khoronzhuk@globallogic.com>
+Description:
+		The firmware provides DMI structures as a packed list of
+		data referenced by a SMBIOS table entry point. The SMBIOS
+		entry point contains general information, like SMBIOS
+		version, DMI table size, etc. The structure, content and
+		size of SMBIOS entry point is dependent on SMBIOS version.
+		The format of SMBIOS entry point and DMI structures
+		can be read in SMBIOS specification.
+
+		The dmi/tables provides raw SMBIOS entry point and DMI tables
+		through sysfs as an alternative to utilities reading them
+		from /dev/mem. The raw SMBIOS entry point and DMI table are
+		presented as binary attributes and are accessible via:
+
+		/sys/firmware/dmi/tables/smbios_entry_point
+		/sys/firmware/dmi/tables/DMI
+
+		The complete DMI information can be obtained using these two
+		tables.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-efi b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-efi
new file mode 100644
index 0000000..e794eac
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-efi
@@ -0,0 +1,30 @@
+What:		/sys/firmware/efi/fw_vendor
+Date:		December 2013
+Contact:	Dave Young <dyoung@redhat.com>
+Description:	It shows the physical address of firmware vendor field in the
+		EFI system table.
+Users:		Kexec
+
+What:		/sys/firmware/efi/runtime
+Date:		December 2013
+Contact:	Dave Young <dyoung@redhat.com>
+Description:	It shows the physical address of runtime service table entry in
+		the EFI system table.
+Users:		Kexec
+
+What:		/sys/firmware/efi/config_table
+Date:		December 2013
+Contact:	Dave Young <dyoung@redhat.com>
+Description:	It shows the physical address of config table entry in the EFI
+		system table.
+Users:		Kexec
+
+What:		/sys/firmware/efi/systab
+Date:		April 2005
+Contact:	linux-efi@vger.kernel.org
+Description:	Displays the physical addresses of all EFI Configuration
+		Tables found via the EFI System Table. The order in
+		which the tables are printed forms an ABI and newer
+		versions are always printed first, i.e. ACPI20 comes
+		before ACPI.
+Users:		dmidecode
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-efi-esrt b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-efi-esrt
new file mode 100644
index 0000000..6e431d1
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-efi-esrt
@@ -0,0 +1,81 @@
+What:		/sys/firmware/efi/esrt/
+Date:		February 2015
+Contact:	Peter Jones <pjones@redhat.com>
+Description:	Provides userland access to read the EFI System Resource Table
+		(ESRT), a catalog of firmware for which can be updated with
+		the UEFI UpdateCapsule mechanism described in section 7.5 of
+		the UEFI Standard.
+Users:		fwupdate - https://github.com/rhinstaller/fwupdate
+
+What:		/sys/firmware/efi/esrt/fw_resource_count
+Date:		February 2015
+Contact:	Peter Jones <pjones@redhat.com>
+Description:	The number of entries in the ESRT
+
+What:		/sys/firmware/efi/esrt/fw_resource_count_max
+Date:		February 2015
+Contact:	Peter Jones <pjones@redhat.com>
+Description:	The maximum number of entries that /could/ be registered
+		in the allocation the table is currently in.  This is
+		really only useful to the system firmware itself.
+
+What:		/sys/firmware/efi/esrt/fw_resource_version
+Date:		February 2015
+Contact:	Peter Jones <pjones@redhat.com>
+Description:	The version of the ESRT structure provided by the firmware.
+
+What:		/sys/firmware/efi/esrt/entries/entry$N/
+Date:		February 2015
+Contact:	Peter Jones <pjones@redhat.com>
+Description:	Each ESRT entry is identified by a GUID, and each gets a
+		subdirectory under entries/ .
+		example: /sys/firmware/efi/esrt/entries/entry0/
+
+What:		/sys/firmware/efi/esrt/entries/entry$N/fw_type
+Date:		February 2015
+Contact:	Peter Jones <pjones@redhat.com>
+Description:	What kind of firmware entry this is:
+		0 - Unknown
+		1 - System Firmware
+		2 - Device Firmware
+		3 - UEFI Driver
+
+What:		/sys/firmware/efi/esrt/entries/entry$N/fw_class
+Date:		February 2015
+Contact:	Peter Jones <pjones@redhat.com>
+Description:	This is the entry's guid, and will match the directory name.
+
+What:		/sys/firmware/efi/esrt/entries/entry$N/fw_version
+Date:		February 2015
+Contact:	Peter Jones <pjones@redhat.com>
+Description:	The version of the firmware currently installed.  This is a
+		32-bit unsigned integer.
+
+What:		/sys/firmware/efi/esrt/entries/entry$N/lowest_supported_fw_version
+Date:		February 2015
+Contact:	Peter Jones <pjones@redhat.com>
+Description:	The lowest version of the firmware that can be installed.
+
+What:		/sys/firmware/efi/esrt/entries/entry$N/capsule_flags
+Date:		February 2015
+Contact:	Peter Jones <pjones@redhat.com>
+Description:	Flags that must be passed to UpdateCapsule()
+
+What:		/sys/firmware/efi/esrt/entries/entry$N/last_attempt_version
+Date:		February 2015
+Contact:	Peter Jones <pjones@redhat.com>
+Description:	The last firmware version for which an update was attempted.
+
+What:		/sys/firmware/efi/esrt/entries/entry$N/last_attempt_status
+Date:		February 2015
+Contact:	Peter Jones <pjones@redhat.com>
+Description:	The result of the last firmware update attempt for the
+		firmware resource entry.
+		0 - Success
+		1 - Insufficient resources
+		2 - Incorrect version
+		3 - Invalid format
+		4 - Authentication error
+		5 - AC power event
+		6 - Battery power event
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map
new file mode 100644
index 0000000..c61b9b3
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map
@@ -0,0 +1,34 @@
+What:		/sys/firmware/efi/runtime-map/
+Date:		December 2013
+Contact:	Dave Young <dyoung@redhat.com>
+Description:	Switching efi runtime services to virtual mode requires
+		that all efi memory ranges which have the runtime attribute
+		bit set to be mapped to virtual addresses.
+
+		The efi runtime services can only be switched to virtual
+		mode once without rebooting. The kexec kernel must maintain
+		the same physical to virtual address mappings as the first
+		kernel. The mappings are exported to sysfs so userspace tools
+		can reassemble them and pass them into the kexec kernel.
+
+		/sys/firmware/efi/runtime-map/ is the directory the kernel
+		exports that information in.
+
+		subdirectories are named with the number of the memory range:
+
+			/sys/firmware/efi/runtime-map/0
+			/sys/firmware/efi/runtime-map/1
+			/sys/firmware/efi/runtime-map/2
+			/sys/firmware/efi/runtime-map/3
+			...
+
+		Each subdirectory contains five files:
+
+		attribute : The attributes of the memory range.
+		num_pages : The size of the memory range in pages.
+		phys_addr : The physical address of the memory range.
+		type      : The type of the memory range.
+		virt_addr : The virtual address of the memory range.
+
+		Above values are all hexadecimal numbers with the '0x' prefix.
+Users:		Kexec
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-gsmi b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-gsmi
new file mode 100644
index 0000000..0faa0aa
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-gsmi
@@ -0,0 +1,58 @@
+What:		/sys/firmware/gsmi
+Date:		March 2011
+Contact:	Mike Waychison <mikew@google.com>
+Description:
+		Some servers used internally at Google have firmware
+		that provides callback functionality via explicit SMI
+		triggers.  Some of the callbacks are similar to those
+		provided by the EFI runtime services page, but due to
+		historical reasons this different entry-point has been
+		used.
+
+		The gsmi driver implements the kernel's abstraction for
+		these firmware callbacks.  Currently, this functionality
+		is limited to handling the system event log and getting
+		access to EFI-style variables stored in nvram.
+
+		Layout:
+
+		/sys/firmware/gsmi/vars:
+
+			This directory has the same layout (and
+			underlying implementation as /sys/firmware/efi/vars.
+			See Documentation/ABI/*/sysfs-firmware-efi-vars
+			for more information on how to interact with
+			this structure.
+
+		/sys/firmware/gsmi/append_to_eventlog - write-only:
+
+			This file takes a binary blob and passes it onto
+			the firmware to be timestamped and appended to
+			the system eventlog.  The binary format is
+			interpreted by the firmware and may change from
+			platform to platform.  The only kernel-enforced
+			requirement is that the blob be prefixed with a
+			32bit host-endian type used as part of the
+			firmware call.
+
+		/sys/firmware/gsmi/clear_config - write-only:
+
+			Writing any value to this file will cause the
+			entire firmware configuration to be reset to
+			"factory defaults".  Callers should assume that
+			a reboot is required for the configuration to be
+			cleared.
+
+		/sys/firmware/gsmi/clear_eventlog - write-only:
+
+			This file is used to clear out a portion/the
+			whole of the system event log.  Values written
+			should be values between 1 and 100 inclusive (in
+			ASCII) representing the fraction of the log to
+			clear.  Not all platforms support fractional
+			clearing though, and this writes to this file
+			will error out if the firmware doesn't like your
+			submitted fraction.
+
+			Callers should assume that a reboot is needed
+			for this operation to complete.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-log b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-log
new file mode 100644
index 0000000..9b58e7c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-log
@@ -0,0 +1,7 @@
+What:		/sys/firmware/log
+Date:		February 2011
+Contact:	Mike Waychison <mikew@google.com>
+Description:
+		The /sys/firmware/log is a binary file that represents a
+		read-only copy of the firmware's log if one is
+		available.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-memmap b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-memmap
new file mode 100644
index 0000000..eca0d65
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-memmap
@@ -0,0 +1,71 @@
+What:		/sys/firmware/memmap/
+Date:		June 2008
+Contact:	Bernhard Walle <bernhard.walle@gmx.de>
+Description:
+		On all platforms, the firmware provides a memory map which the
+		kernel reads. The resources from that memory map are registered
+		in the kernel resource tree and exposed to userspace via
+		/proc/iomem (together with other resources).
+
+		However, on most architectures that firmware-provided memory
+		map is modified afterwards by the kernel itself, either because
+		the kernel merges that memory map with other information or
+		just because the user overwrites that memory map via command
+		line.
+
+		kexec needs the raw firmware-provided memory map to setup the
+		parameter segment of the kernel that should be booted with
+		kexec. Also, the raw memory map is useful for debugging. For
+		that reason, /sys/firmware/memmap is an interface that provides
+		the raw memory map to userspace.
+
+		The structure is as follows: Under /sys/firmware/memmap there
+		are subdirectories with the number of the entry as their name:
+
+			/sys/firmware/memmap/0
+			/sys/firmware/memmap/1
+			/sys/firmware/memmap/2
+			/sys/firmware/memmap/3
+			...
+
+		The maximum depends on the number of memory map entries provided
+		by the firmware. The order is just the order that the firmware
+		provides.
+
+		Each directory contains three files:
+
+		start	: The start address (as hexadecimal number with the
+			  '0x' prefix).
+		end	: The end address, inclusive (regardless whether the
+			  firmware provides inclusive or exclusive ranges).
+		type	: Type of the entry as string. See below for a list of
+			  valid types.
+
+		So, for example:
+
+			/sys/firmware/memmap/0/start
+			/sys/firmware/memmap/0/end
+			/sys/firmware/memmap/0/type
+			/sys/firmware/memmap/1/start
+			...
+
+		Currently following types exist:
+
+		  - System RAM
+		  - ACPI Tables
+		  - ACPI Non-volatile Storage
+		  - reserved
+
+		Following shell snippet can be used to display that memory
+		map in a human-readable format:
+
+		-------------------- 8< ----------------------------------------
+		  #!/bin/bash
+		  cd /sys/firmware/memmap
+		  for dir in * ; do
+		      start=$(cat $dir/start)
+		      end=$(cat $dir/end)
+		      type=$(cat $dir/type)
+		      printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type"
+		  done
+		-------------------- >8 ----------------------------------------
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-ofw b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-ofw
new file mode 100644
index 0000000..edcab3c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-ofw
@@ -0,0 +1,52 @@
+What:		/sys/firmware/devicetree/*
+Date:		November 2013
+Contact:	Grant Likely <grant.likely@arm.com>, devicetree@vger.kernel.org
+Description:
+		When using OpenFirmware or a Flattened Device Tree to enumerate
+		hardware, the device tree structure will be exposed in this
+		directory.
+
+		It is possible for multiple device-tree directories to exist.
+		Some device drivers use a separate detached device tree which
+		have no attachment to the system tree and will appear in a
+		different subdirectory under /sys/firmware/devicetree.
+
+		Userspace must not use the /sys/firmware/devicetree/base
+		path directly, but instead should follow /proc/device-tree
+		symlink. It is possible that the absolute path will change
+		in the future, but the symlink is the stable ABI.
+
+		The /proc/device-tree symlink replaces the devicetree /proc
+		filesystem support, and has largely the same semantics and
+		should be compatible with existing userspace.
+
+		The contents of /sys/firmware/devicetree/ is a
+		hierarchy of directories, one per device tree node. The
+		directory name is the resolved path component name (node
+		name plus address). Properties are represented as files
+		in the directory. The contents of each file is the exact
+		binary data from the device tree.
+
+What:		/sys/firmware/fdt
+Date:		February 2015
+KernelVersion:	3.19
+Contact:	Frank Rowand <frowand.list@gmail.com>, devicetree@vger.kernel.org
+Description:
+		Exports the FDT blob that was passed to the kernel by
+		the bootloader. This allows userland applications such
+		as kexec to access the raw binary. This blob is also
+		useful when debugging since it contains any changes
+		made to the blob by the bootloader.
+
+		The fact that this node does not reside under
+		/sys/firmware/device-tree is deliberate: FDT is also used
+		on arm64 UEFI/ACPI systems to communicate just the UEFI
+		and ACPI entry points, but the FDT is never unflattened
+		and used to configure the system.
+
+		A CRC32 checksum is calculated over the entire FDT
+		blob, and verified at late_initcall time. The sysfs
+		entry is instantiated only if the checksum is valid,
+		i.e., if the FDT blob has not been modified in the mean
+		time. Otherwise, a warning is printed.
+Users:		kexec, debugging
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-opal-powercap b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-opal-powercap
new file mode 100644
index 0000000..c9b66ec
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-opal-powercap
@@ -0,0 +1,31 @@
+What:		/sys/firmware/opal/powercap
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	Powercap directory for Powernv (P8, P9) servers
+
+		Each folder in this directory contains a
+		power-cappable component.
+
+What:		/sys/firmware/opal/powercap/system-powercap
+		/sys/firmware/opal/powercap/system-powercap/powercap-min
+		/sys/firmware/opal/powercap/system-powercap/powercap-max
+		/sys/firmware/opal/powercap/system-powercap/powercap-current
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	System powercap directory and attributes applicable for
+		Powernv (P8, P9) servers
+
+		This directory provides powercap information. It
+		contains below sysfs attributes:
+
+		- powercap-min : This file provides the minimum
+		  possible powercap in Watt units
+
+		- powercap-max : This file provides the maximum
+		  possible powercap in Watt units
+
+		- powercap-current : This file provides the current
+		  powercap set on the system. Writing to this file
+		  creates a request for setting a new-powercap. The
+		  powercap requested must be between powercap-min
+		  and powercap-max.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-opal-psr b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-opal-psr
new file mode 100644
index 0000000..cc2ece7
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-opal-psr
@@ -0,0 +1,18 @@
+What:		/sys/firmware/opal/psr
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	Power-Shift-Ratio directory for Powernv P9 servers
+
+		Power-Shift-Ratio allows to provide hints the firmware
+		to shift/throttle power between different entities in
+		the system. Each attribute in this directory indicates
+		a settable PSR.
+
+What:		/sys/firmware/opal/psr/cpu_to_gpu_X
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	PSR sysfs attributes for Powernv P9 servers
+
+		Power-Shift-Ratio between CPU and GPU for a given chip
+		with chip-id X. This file gives the ratio (0-100)
+		which is used by OCC for power-capping.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
new file mode 100644
index 0000000..011dda4
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
@@ -0,0 +1,100 @@
+What:		/sys/firmware/qemu_fw_cfg/
+Date:		August 2015
+Contact:	Gabriel Somlo <somlo@cmu.edu>
+Description:
+		Several different architectures supported by QEMU (x86, arm,
+		sun4*, ppc/mac) are provisioned with a firmware configuration
+		(fw_cfg) device, originally intended as a way for the host to
+		provide configuration data to the guest firmware. Starting
+		with QEMU v2.4, arbitrary fw_cfg file entries may be specified
+		by the user on the command line, which makes fw_cfg additionally
+		useful as an out-of-band, asynchronous mechanism for providing
+		configuration data to the guest userspace.
+
+		The authoritative guest-side hardware interface documentation
+		to the fw_cfg device can be found in "docs/specs/fw_cfg.txt"
+		in the QEMU source tree.
+
+		=== SysFS fw_cfg Interface ===
+
+		The fw_cfg sysfs interface described in this document is only
+		intended to display discoverable blobs (i.e., those registered
+		with the file directory), as there is no way to determine the
+		presence or size of "legacy" blobs (with selector keys between
+		0x0002 and 0x0018) programmatically.
+
+		All fw_cfg information is shown under:
+
+			/sys/firmware/qemu_fw_cfg/
+
+		The only legacy blob displayed is the fw_cfg device revision:
+
+			/sys/firmware/qemu_fw_cfg/rev
+
+		--- Discoverable fw_cfg blobs by selector key ---
+
+		All discoverable blobs listed in the fw_cfg file directory are
+		displayed as entries named after their unique selector key
+		value, e.g.:
+
+			/sys/firmware/qemu_fw_cfg/by_key/32
+			/sys/firmware/qemu_fw_cfg/by_key/33
+			/sys/firmware/qemu_fw_cfg/by_key/34
+			...
+
+		Each such fw_cfg sysfs entry has the following values exported
+		as attributes:
+
+		name  	: The 56-byte nul-terminated ASCII string used as the
+			  blob's 'file name' in the fw_cfg directory.
+		size  	: The length of the blob, as given in the fw_cfg
+			  directory.
+		key	: The value of the blob's selector key as given in the
+			  fw_cfg directory. This value is the same as used in
+			  the parent directory name.
+		raw	: The raw bytes of the blob, obtained by selecting the
+			  entry via the control register, and reading a number
+			  of bytes equal to the blob size from the data
+			  register.
+
+		--- Listing fw_cfg blobs by file name ---
+
+		While the fw_cfg device does not impose any specific naming
+		convention on the blobs registered in the file directory,
+		QEMU developers have traditionally used path name semantics
+		to give each blob a descriptive name. For example:
+
+			"bootorder"
+			"genroms/kvmvapic.bin"
+			"etc/e820"
+			"etc/boot-fail-wait"
+			"etc/system-states"
+			"etc/table-loader"
+			"etc/acpi/rsdp"
+			"etc/acpi/tables"
+			"etc/smbios/smbios-tables"
+			"etc/smbios/smbios-anchor"
+			...
+
+		In addition to the listing by unique selector key described
+		above, the fw_cfg sysfs driver also attempts to build a tree
+		of directories matching the path name components of fw_cfg
+		blob names, ending in symlinks to the by_key entry for each
+		"basename", as illustrated below (assume current directory is
+		/sys/firmware):
+
+		    qemu_fw_cfg/by_name/bootorder -> ../by_key/38
+		    qemu_fw_cfg/by_name/etc/e820 -> ../../by_key/35
+		    qemu_fw_cfg/by_name/etc/acpi/rsdp -> ../../../by_key/41
+		    ...
+
+		Construction of the directory tree and symlinks is done on a
+		"best-effort" basis, as there is no guarantee that components
+		of fw_cfg blob names are always "well behaved". I.e., there is
+		the possibility that a symlink (basename) will conflict with
+		a dirname component of another fw_cfg blob, in which case the
+		creation of the offending /sys/firmware/qemu_fw_cfg/by_name
+		entry will be skipped.
+
+		The authoritative list of entries will continue to be found
+		under the /sys/firmware/qemu_fw_cfg/by_key directory.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-sfi b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-sfi
new file mode 100644
index 0000000..4be7d44
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-sfi
@@ -0,0 +1,15 @@
+What:		/sys/firmware/sfi/tables/
+Date:		May 2010
+Contact:	Len Brown <lenb@kernel.org>
+Description:
+		SFI defines a number of small static memory tables
+		so the kernel can get platform information from firmware.
+
+		The tables are defined in the latest SFI specification:
+		http://simplefirmware.org/documentation
+
+		While the tables are used by the kernel, user-space
+		can observe them this way:
+
+		# cd /sys/firmware/sfi/tables
+		# cat $TABLENAME > $TABLENAME.bin
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-sgi_uv b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-sgi_uv
new file mode 100644
index 0000000..4573fd4
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-firmware-sgi_uv
@@ -0,0 +1,27 @@
+What:		/sys/firmware/sgi_uv/
+Date:		August 2008
+Contact:	Russ Anderson <rja@sgi.com>
+Description:
+		The /sys/firmware/sgi_uv directory contains information
+		about the SGI UV platform.
+
+		Under that directory are a number of files:
+
+			partition_id
+			coherence_id
+
+		The partition_id entry contains the partition id.
+		SGI UV systems can be partitioned into multiple physical
+		machines, which each partition running a unique copy
+		of the operating system.  Each partition will have a unique
+		partition id.  To display the partition id, use the command:
+
+			cat /sys/firmware/sgi_uv/partition_id
+
+		The coherence_id entry contains the coherence id.
+		A partitioned SGI UV system can have one or more coherence
+		domain.  The coherence id indicates which coherence domain
+		this partition is in.  To display the coherence id, use the
+		command:
+
+			cat /sys/firmware/sgi_uv/coherence_id
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-fs-ext4 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-fs-ext4
new file mode 100644
index 0000000..c631253
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-fs-ext4
@@ -0,0 +1,111 @@
+What:		/sys/fs/ext4/<disk>/mb_stats
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		 Controls whether the multiblock allocator should
+		 collect statistics, which are shown during the unmount.
+		 1 means to collect statistics, 0 means not to collect
+		 statistics
+
+What:		/sys/fs/ext4/<disk>/mb_group_prealloc
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The multiblock allocator will round up allocation
+		requests to a multiple of this tuning parameter if the
+		stripe size is not set in the ext4 superblock
+
+What:		/sys/fs/ext4/<disk>/mb_max_to_scan
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The maximum number of extents the multiblock allocator
+		will search to find the best extent
+
+What:		/sys/fs/ext4/<disk>/mb_min_to_scan
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The minimum number of extents the multiblock allocator
+		will search to find the best extent
+
+What:		/sys/fs/ext4/<disk>/mb_order2_req
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Tuning parameter which controls the minimum size for 
+		requests (as a power of 2) where the buddy cache is
+		used
+
+What:		/sys/fs/ext4/<disk>/mb_stream_req
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Files which have fewer blocks than this tunable
+		parameter will have their blocks allocated out of a
+		block group specific preallocation pool, so that small
+		files are packed closely together.  Each large file
+		 will have its blocks allocated out of its own unique
+		 preallocation pool.
+
+What:		/sys/fs/ext4/<disk>/inode_readahead_blks
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Tuning parameter which controls the maximum number of
+		inode table blocks that ext4's inode table readahead
+		algorithm will pre-read into the buffer cache
+
+What:		/sys/fs/ext4/<disk>/delayed_allocation_blocks
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		This file is read-only and shows the number of blocks
+		that are dirty in the page cache, but which do not
+		have their location in the filesystem allocated yet.
+
+What:		/sys/fs/ext4/<disk>/lifetime_write_kbytes
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		This file is read-only and shows the number of kilobytes
+		of data that have been written to this filesystem since it was
+		created.
+
+What:		/sys/fs/ext4/<disk>/session_write_kbytes
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		This file is read-only and shows the number of
+		kilobytes of data that have been written to this
+		filesystem since it was mounted.
+
+What:		/sys/fs/ext4/<disk>/inode_goal
+Date:		June 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Tuning parameter which (if non-zero) controls the goal
+		inode used by the inode allocator in preference to
+		all other allocation heuristics.  This is intended for
+		debugging use only, and should be 0 on production
+		systems.
+
+What:		/sys/fs/ext4/<disk>/max_writeback_mb_bump
+Date:		September 2009
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The maximum number of megabytes the writeback code will
+		try to write out before move on to another inode.
+
+What:		/sys/fs/ext4/<disk>/extent_max_zeroout_kb
+Date:		August 2012
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The maximum number of kilobytes which will be zeroed
+		out in preference to creating a new uninitialized
+		extent when manipulating an inode's extent tree.  Note
+		that using a larger value will increase the
+		variability of time necessary to complete a random
+		write operation (since a 4k random write might turn
+		into a much larger write due to the zeroout
+		operation).
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-fs-f2fs b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-fs-f2fs
new file mode 100644
index 0000000..372b88f
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -0,0 +1,206 @@
+What:		/sys/fs/f2fs/<disk>/gc_max_sleep_time
+Date:		July 2013
+Contact:	"Namjae Jeon" <namjae.jeon@samsung.com>
+Description:
+		 Controls the maximun sleep time for gc_thread. Time
+		 is in milliseconds.
+
+What:		/sys/fs/f2fs/<disk>/gc_min_sleep_time
+Date:		July 2013
+Contact:	"Namjae Jeon" <namjae.jeon@samsung.com>
+Description:
+		 Controls the minimum sleep time for gc_thread. Time
+		 is in milliseconds.
+
+What:		/sys/fs/f2fs/<disk>/gc_no_gc_sleep_time
+Date:		July 2013
+Contact:	"Namjae Jeon" <namjae.jeon@samsung.com>
+Description:
+		 Controls the default sleep time for gc_thread. Time
+		 is in milliseconds.
+
+What:		/sys/fs/f2fs/<disk>/gc_idle
+Date:		July 2013
+Contact:	"Namjae Jeon" <namjae.jeon@samsung.com>
+Description:
+		 Controls the victim selection policy for garbage collection.
+
+What:		/sys/fs/f2fs/<disk>/reclaim_segments
+Date:		October 2013
+Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
+Description:
+		 Controls the issue rate of segment discard commands.
+
+What:		/sys/fs/f2fs/<disk>/ipu_policy
+Date:		November 2013
+Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
+Description:
+		 Controls the in-place-update policy.
+
+What:		/sys/fs/f2fs/<disk>/min_ipu_util
+Date:		November 2013
+Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
+Description:
+		 Controls the FS utilization condition for the in-place-update
+		 policies.
+
+What:		/sys/fs/f2fs/<disk>/min_fsync_blocks
+Date:		September 2014
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+		 Controls the dirty page count condition for the in-place-update
+		 policies.
+
+What:		/sys/fs/f2fs/<disk>/min_hot_blocks
+Date:		March 2017
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+		 Controls the dirty page count condition for redefining hot data.
+
+What:		/sys/fs/f2fs/<disk>/min_ssr_sections
+Date:		October 2017
+Contact:	"Chao Yu" <yuchao0@huawei.com>
+Description:
+		 Controls the fee section threshold to trigger SSR allocation.
+
+What:		/sys/fs/f2fs/<disk>/max_small_discards
+Date:		November 2013
+Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
+Description:
+		 Controls the issue rate of small discard commands.
+
+What:          /sys/fs/f2fs/<disk>/discard_granularity
+Date:          July 2017
+Contact:       "Chao Yu" <yuchao0@huawei.com>
+Description:
+		Controls discard granularity of inner discard thread, inner thread
+		will not issue discards with size that is smaller than granularity.
+		The unit size is one block, now only support configuring in range
+		of [1, 512].
+
+What:		/sys/fs/f2fs/<disk>/max_victim_search
+Date:		January 2014
+Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
+Description:
+		 Controls the number of trials to find a victim segment.
+
+What:		/sys/fs/f2fs/<disk>/dir_level
+Date:		March 2014
+Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
+Description:
+		 Controls the directory level for large directory.
+
+What:		/sys/fs/f2fs/<disk>/ram_thresh
+Date:		March 2014
+Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
+Description:
+		 Controls the memory footprint used by f2fs.
+
+What:		/sys/fs/f2fs/<disk>/batched_trim_sections
+Date:		February 2015
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+		 Controls the trimming rate in batch mode.
+		 <deprecated>
+
+What:		/sys/fs/f2fs/<disk>/cp_interval
+Date:		October 2015
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+		 Controls the checkpoint timing.
+
+What:		/sys/fs/f2fs/<disk>/idle_interval
+Date:		January 2016
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+		 Controls the idle timing.
+
+What:		/sys/fs/f2fs/<disk>/iostat_enable
+Date:		August 2017
+Contact:	"Chao Yu" <yuchao0@huawei.com>
+Description:
+		 Controls to enable/disable IO stat.
+
+What:		/sys/fs/f2fs/<disk>/ra_nid_pages
+Date:		October 2015
+Contact:	"Chao Yu" <chao2.yu@samsung.com>
+Description:
+		 Controls the count of nid pages to be readaheaded.
+
+What:		/sys/fs/f2fs/<disk>/dirty_nats_ratio
+Date:		January 2016
+Contact:	"Chao Yu" <chao2.yu@samsung.com>
+Description:
+		 Controls dirty nat entries ratio threshold, if current
+		 ratio exceeds configured threshold, checkpoint will
+		 be triggered for flushing dirty nat entries.
+
+What:		/sys/fs/f2fs/<disk>/lifetime_write_kbytes
+Date:		January 2016
+Contact:	"Shuoran Liu" <liushuoran@huawei.com>
+Description:
+		 Shows total written kbytes issued to disk.
+
+What:		/sys/fs/f2fs/<disk>/feature
+Date:		July 2017
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+		 Shows all enabled features in current device.
+
+What:		/sys/fs/f2fs/<disk>/inject_rate
+Date:		May 2016
+Contact:	"Sheng Yong" <shengyong1@huawei.com>
+Description:
+		 Controls the injection rate.
+
+What:		/sys/fs/f2fs/<disk>/inject_type
+Date:		May 2016
+Contact:	"Sheng Yong" <shengyong1@huawei.com>
+Description:
+		 Controls the injection type.
+
+What:		/sys/fs/f2fs/<disk>/reserved_blocks
+Date:		June 2017
+Contact:	"Chao Yu" <yuchao0@huawei.com>
+Description:
+		 Controls target reserved blocks in system, the threshold
+		 is soft, it could exceed current available user space.
+
+What:		/sys/fs/f2fs/<disk>/current_reserved_blocks
+Date:		October 2017
+Contact:	"Yunlong Song" <yunlong.song@huawei.com>
+Contact:	"Chao Yu" <yuchao0@huawei.com>
+Description:
+		 Shows current reserved blocks in system, it may be temporarily
+		 smaller than target_reserved_blocks, but will gradually
+		 increase to target_reserved_blocks when more free blocks are
+		 freed by user later.
+
+What:		/sys/fs/f2fs/<disk>/gc_urgent
+Date:		August 2017
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+		 Do background GC agressively
+
+What:		/sys/fs/f2fs/<disk>/gc_urgent_sleep_time
+Date:		August 2017
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+		 Controls sleep time of GC urgent mode
+
+What:		/sys/fs/f2fs/<disk>/readdir_ra
+Date:		November 2017
+Contact:	"Sheng Yong" <shengyong1@huawei.com>
+Description:
+		 Controls readahead inode block in readdir.
+
+What:		/sys/fs/f2fs/<disk>/extension_list
+Date:		Feburary 2018
+Contact:	"Chao Yu" <yuchao0@huawei.com>
+Description:
+		 Used to control configure extension list:
+		 - Query: cat /sys/fs/f2fs/<disk>/extension_list
+		 - Add: echo '[h/c]extension' > /sys/fs/f2fs/<disk>/extension_list
+		 - Del: echo '[h/c]!extension' > /sys/fs/f2fs/<disk>/extension_list
+		 - [h] means add/del hot file extension
+		 - [c] means add/del cold file extension
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-fs-nilfs2 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-fs-nilfs2
new file mode 100644
index 0000000..304ba84
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-fs-nilfs2
@@ -0,0 +1,269 @@
+
+What:		/sys/fs/nilfs2/features/revision
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show current revision of NILFS file system driver.
+		This value informs about file system revision that
+		driver is ready to support.
+
+What:		/sys/fs/nilfs2/features/README
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Describe attributes of /sys/fs/nilfs2/features group.
+
+What:		/sys/fs/nilfs2/<device>/revision
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show NILFS file system revision on volume.
+		This value informs about metadata structures'
+		revision on mounted volume.
+
+What:		/sys/fs/nilfs2/<device>/blocksize
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show volume's block size in bytes.
+
+What:		/sys/fs/nilfs2/<device>/device_size
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show volume size in bytes.
+
+What:		/sys/fs/nilfs2/<device>/free_blocks
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show count of free blocks on volume.
+
+What:		/sys/fs/nilfs2/<device>/uuid
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show volume's UUID (Universally Unique Identifier).
+
+What:		/sys/fs/nilfs2/<device>/volume_name
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show volume's label.
+
+What:		/sys/fs/nilfs2/<device>/README
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Describe attributes of /sys/fs/nilfs2/<device> group.
+
+What:		/sys/fs/nilfs2/<device>/superblock/sb_write_time
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show last write time of super block in human-readable
+		format.
+
+What:		/sys/fs/nilfs2/<device>/superblock/sb_write_time_secs
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show last write time of super block in seconds.
+
+What:		/sys/fs/nilfs2/<device>/superblock/sb_write_count
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show current write count of super block.
+
+What:		/sys/fs/nilfs2/<device>/superblock/sb_update_frequency
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show/Set interval of periodical update of superblock
+		(in seconds).
+
+What:		/sys/fs/nilfs2/<device>/superblock/README
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Describe attributes of /sys/fs/nilfs2/<device>/superblock
+		group.
+
+What:		/sys/fs/nilfs2/<device>/segctor/last_pseg_block
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show start block number of the latest segment.
+
+What:		/sys/fs/nilfs2/<device>/segctor/last_seg_sequence
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show sequence value of the latest segment.
+
+What:		/sys/fs/nilfs2/<device>/segctor/last_seg_checkpoint
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show checkpoint number of the latest segment.
+
+What:		/sys/fs/nilfs2/<device>/segctor/current_seg_sequence
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show segment sequence counter.
+
+What:		/sys/fs/nilfs2/<device>/segctor/current_last_full_seg
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show index number of the latest full segment.
+
+What:		/sys/fs/nilfs2/<device>/segctor/next_full_seg
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show index number of the full segment index
+		to be used next.
+
+What:		/sys/fs/nilfs2/<device>/segctor/next_pseg_offset
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show offset of next partial segment in the current
+		full segment.
+
+What:		/sys/fs/nilfs2/<device>/segctor/next_checkpoint
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show next checkpoint number.
+
+What:		/sys/fs/nilfs2/<device>/segctor/last_seg_write_time
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show write time of the last segment in
+		human-readable format.
+
+What:		/sys/fs/nilfs2/<device>/segctor/last_seg_write_time_secs
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show write time of the last segment in seconds.
+
+What:		/sys/fs/nilfs2/<device>/segctor/last_nongc_write_time
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show write time of the last segment not for cleaner
+		operation in human-readable format.
+
+What:		/sys/fs/nilfs2/<device>/segctor/last_nongc_write_time_secs
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show write time of the last segment not for cleaner
+		operation in seconds.
+
+What:		/sys/fs/nilfs2/<device>/segctor/dirty_data_blocks_count
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show number of dirty data blocks.
+
+What:		/sys/fs/nilfs2/<device>/segctor/README
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Describe attributes of /sys/fs/nilfs2/<device>/segctor
+		group.
+
+What:		/sys/fs/nilfs2/<device>/segments/segments_number
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show number of segments on a volume.
+
+What:		/sys/fs/nilfs2/<device>/segments/blocks_per_segment
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show number of blocks in segment.
+
+What:		/sys/fs/nilfs2/<device>/segments/clean_segments
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show count of clean segments.
+
+What:		/sys/fs/nilfs2/<device>/segments/dirty_segments
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show count of dirty segments.
+
+What:		/sys/fs/nilfs2/<device>/segments/README
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Describe attributes of /sys/fs/nilfs2/<device>/segments
+		group.
+
+What:		/sys/fs/nilfs2/<device>/checkpoints/checkpoints_number
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show number of checkpoints on volume.
+
+What:		/sys/fs/nilfs2/<device>/checkpoints/snapshots_number
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show number of snapshots on volume.
+
+What:		/sys/fs/nilfs2/<device>/checkpoints/last_seg_checkpoint
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show checkpoint number of the latest segment.
+
+What:		/sys/fs/nilfs2/<device>/checkpoints/next_checkpoint
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show next checkpoint number.
+
+What:		/sys/fs/nilfs2/<device>/checkpoints/README
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Describe attributes of /sys/fs/nilfs2/<device>/checkpoints
+		group.
+
+What:		/sys/fs/nilfs2/<device>/mounted_snapshots/README
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Describe content of /sys/fs/nilfs2/<device>/mounted_snapshots
+		group.
+
+What:		/sys/fs/nilfs2/<device>/mounted_snapshots/<id>/inodes_count
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show number of inodes for snapshot.
+
+What:		/sys/fs/nilfs2/<device>/mounted_snapshots/<id>/blocks_count
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show number of blocks for snapshot.
+
+What:		/sys/fs/nilfs2/<device>/mounted_snapshots/<id>/README
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Describe attributes of /sys/fs/nilfs2/<device>/mounted_snapshots/<id>
+		group.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-fs-xfs b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-fs-xfs
new file mode 100644
index 0000000..ea0cc8c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-fs-xfs
@@ -0,0 +1,39 @@
+What:		/sys/fs/xfs/<disk>/log/log_head_lsn
+Date:		July 2014
+KernelVersion:	3.17
+Contact:	xfs@oss.sgi.com
+Description:
+		The log sequence number (LSN) of the current head of the
+		log. The LSN is exported in "cycle:basic block" format.
+Users:		xfstests
+
+What:		/sys/fs/xfs/<disk>/log/log_tail_lsn
+Date:		July 2014
+KernelVersion:	3.17
+Contact:	xfs@oss.sgi.com
+Description:
+		The log sequence number (LSN) of the current tail of the
+		log. The LSN is exported in "cycle:basic block" format.
+
+What:		/sys/fs/xfs/<disk>/log/reserve_grant_head
+Date:		July 2014
+KernelVersion:	3.17
+Contact:	xfs@oss.sgi.com
+Description:
+		The current state of the log reserve grant head. It
+		represents the total log reservation of all currently
+		outstanding transactions. The grant head is exported in
+		"cycle:bytes" format.
+Users:		xfstests
+
+What:		/sys/fs/xfs/<disk>/log/write_grant_head
+Date:		July 2014
+KernelVersion:	3.17
+Contact:	xfs@oss.sgi.com
+Description:
+		The current state of the log write grant head. It
+		represents the total log reservation of all currently
+		oustanding transactions, including regrants due to
+		rolling transactions. The grant head is exported in
+		"cycle:bytes" format.
+Users:		xfstests
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-hypervisor-xen b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-hypervisor-xen
new file mode 100644
index 0000000..53b7b2e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-hypervisor-xen
@@ -0,0 +1,43 @@
+What:		/sys/hypervisor/guest_type
+Date:		June 2017
+KernelVersion:	4.13
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Type of guest:
+		"Xen": standard guest type on arm
+		"HVM": fully virtualized guest (x86)
+		"PV": paravirtualized guest (x86)
+		"PVH": fully virtualized guest without legacy emulation (x86)
+
+What:		/sys/hypervisor/pmu/pmu_mode
+Date:		August 2015
+KernelVersion:	4.3
+Contact:	Boris Ostrovsky <boris.ostrovsky@oracle.com>
+Description:	If running under Xen:
+		Describes mode that Xen's performance-monitoring unit (PMU)
+		uses. Accepted values are
+			"off"  -- PMU is disabled
+			"self" -- The guest can profile itself
+			"hv"   -- The guest can profile itself and, if it is
+				  privileged (e.g. dom0), the hypervisor
+			"all" --  The guest can profile itself, the hypervisor
+				  and all other guests. Only available to
+				  privileged guests.
+
+What:           /sys/hypervisor/pmu/pmu_features
+Date:           August 2015
+KernelVersion:  4.3
+Contact:        Boris Ostrovsky <boris.ostrovsky@oracle.com>
+Description:	If running under Xen:
+		Describes Xen PMU features (as an integer). A set bit indicates
+		that the corresponding feature is enabled. See
+		include/xen/interface/xenpmu.h for available features
+
+What:		/sys/hypervisor/properties/buildid
+Date:		June 2017
+KernelVersion:	4.13
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Build id of the hypervisor, needed for hypervisor live patching.
+		Might return "<denied>" in case of special security settings
+		in the hypervisor.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-ibft b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-ibft
new file mode 100644
index 0000000..7d6725f
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-ibft
@@ -0,0 +1,33 @@
+What:		/sys/firmware/ibft/initiator
+Date:		November 2007
+Contact:	Konrad Rzeszutek <ketuzsezr@darnok.org>
+Description:	The /sys/firmware/ibft/initiator directory will contain
+		files that expose the iSCSI Boot Firmware Table initiator data.
+		Usually this contains the Initiator name.
+
+What:		/sys/firmware/ibft/targetX
+Date:		November 2007
+Contact:	Konrad Rzeszutek <ketuzsezr@darnok.org>
+Description:	The /sys/firmware/ibft/targetX directory will contain
+		files that expose the iSCSI Boot Firmware Table target data.
+		Usually this contains the target's IP address, boot LUN,
+		target name, and what NIC it is associated with. It can also
+		contain the CHAP name (and password), the reverse CHAP
+		name (and password)
+
+What:		/sys/firmware/ibft/ethernetX
+Date:		November 2007
+Contact:	Konrad Rzeszutek <ketuzsezr@darnok.org>
+Description:	The /sys/firmware/ibft/ethernetX directory will contain
+		files that expose the iSCSI Boot Firmware Table NIC data.
+		Usually this contains the IP address, MAC, and gateway of the NIC.
+
+What:		/sys/firmware/ibft/acpi_header
+Date:		March 2016
+Contact:	David Bond <dbond@suse.com>
+Description:	The /sys/firmware/ibft/acpi_header directory will contain files
+		that expose the SIGNATURE, OEM_ID, and OEM_TABLE_ID fields of the
+		acpi table header of the iBFT structure.  This will allow for
+		identification of the creator of the table which is useful in
+		determining quirks associated with some adapters when used in
+		hardware vs software iscsi initiator mode.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-boot_params b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-boot_params
new file mode 100644
index 0000000..eca38ce
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-boot_params
@@ -0,0 +1,38 @@
+What:		/sys/kernel/boot_params
+Date:		December 2013
+Contact:	Dave Young <dyoung@redhat.com>
+Description:	The /sys/kernel/boot_params directory contains two
+		files: "data" and "version" and one subdirectory "setup_data".
+		It is used to export the kernel boot parameters of an x86
+		platform to userspace for kexec and debugging purpose.
+
+		If there's no setup_data in boot_params the subdirectory will
+		not be created.
+
+		"data" file is the binary representation of struct boot_params.
+
+		"version" file is the string representation of boot
+		protocol version.
+
+		"setup_data" subdirectory contains the setup_data data
+		structure in boot_params. setup_data is maintained in kernel
+		as a link list. In "setup_data" subdirectory there's one
+		subdirectory for each link list node named with the number
+		of the list nodes. The list node subdirectory contains two
+		files "type" and "data". "type" file is the string
+		representation of setup_data type. "data" file is the binary
+		representation of setup_data payload.
+
+		The whole boot_params directory structure is like below:
+		/sys/kernel/boot_params
+		|__ data
+		|__ setup_data
+		|   |__ 0
+		|   |   |__ data
+		|   |   |__ type
+		|   |__ 1
+		|       |__ data
+		|       |__ type
+		|__ version
+
+Users:		Kexec
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-fscaps b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-fscaps
new file mode 100644
index 0000000..50a3033
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-fscaps
@@ -0,0 +1,8 @@
+What:		/sys/kernel/fscaps
+Date:		February 2011
+KernelVersion:	2.6.38
+Contact:	Ludwig Nussel <ludwig.nussel@suse.de>
+Description
+		Shows whether file system capabilities are honored
+		when executing a binary
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-iommu_groups b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-iommu_groups
new file mode 100644
index 0000000..35c64e0
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-iommu_groups
@@ -0,0 +1,26 @@
+What:		/sys/kernel/iommu_groups/
+Date:		May 2012
+KernelVersion:	v3.5
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:	/sys/kernel/iommu_groups/ contains a number of sub-
+		directories, each representing an IOMMU group.  The
+		name of the sub-directory matches the iommu_group_id()
+		for the group, which is an integer value.  Within each
+		subdirectory is another directory named "devices" with
+		links to the sysfs devices contained in this group.
+		The group directory also optionally contains a "name"
+		file if the IOMMU driver has chosen to register a more
+		common name for the group.
+Users:
+
+What:		/sys/kernel/iommu_groups/reserved_regions
+Date: 		January 2017
+KernelVersion:  v4.11
+Contact: 	Eric Auger <eric.auger@redhat.com>
+Description:    /sys/kernel/iommu_groups/reserved_regions list IOVA
+		regions that are reserved. Not necessarily all
+		reserved regions are listed. This is typically used to
+		output direct-mapped, MSI, non mappable regions. Each
+		region is described on a single line: the 1st field is
+		the base IOVA, the second is the end IOVA and the third
+		field describes the type of the region.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-irq b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-irq
new file mode 100644
index 0000000..eb074b1
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-irq
@@ -0,0 +1,53 @@
+What:		/sys/kernel/irq
+Date:		September 2016
+KernelVersion:	4.9
+Contact:	Craig Gallek <kraig@google.com>
+Description:	Directory containing information about the system's IRQs.
+		Specifically, data from the associated struct irq_desc.
+		The information here is similar to that in /proc/interrupts
+		but in a more machine-friendly format.  This directory contains
+		one subdirectory for each Linux IRQ number.
+
+What:		/sys/kernel/irq/<irq>/actions
+Date:		September 2016
+KernelVersion:	4.9
+Contact:	Craig Gallek <kraig@google.com>
+Description:	The IRQ action chain.  A comma-separated list of zero or more
+		device names associated with this interrupt.
+
+What:		/sys/kernel/irq/<irq>/chip_name
+Date:		September 2016
+KernelVersion:	4.9
+Contact:	Craig Gallek <kraig@google.com>
+Description:	Human-readable chip name supplied by the associated device
+		driver.
+
+What:		/sys/kernel/irq/<irq>/hwirq
+Date:		September 2016
+KernelVersion:	4.9
+Contact:	Craig Gallek <kraig@google.com>
+Description:	When interrupt translation domains are used, this file contains
+		the underlying hardware IRQ number used for this Linux IRQ.
+
+What:		/sys/kernel/irq/<irq>/name
+Date:		September 2016
+KernelVersion:	4.9
+Contact:	Craig Gallek <kraig@google.com>
+Description:	Human-readable flow handler name as defined by the irq chip
+		driver.
+
+What:		/sys/kernel/irq/<irq>/per_cpu_count
+Date:		September 2016
+KernelVersion:	4.9
+Contact:	Craig Gallek <kraig@google.com>
+Description:	The number of times the interrupt has fired since boot.  This
+		is a comma-separated list of counters; one per CPU in CPU id
+		order.  NOTE: This file consistently shows counters for all
+		CPU ids.  This differs from the behavior of /proc/interrupts
+		which only shows counters for online CPUs.
+
+What:		/sys/kernel/irq/<irq>/type
+Date:		September 2016
+KernelVersion:	4.9
+Contact:	Craig Gallek <kraig@google.com>
+Description:	The type of the interrupt.  Either the string 'level' or 'edge'.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-livepatch b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-livepatch
new file mode 100644
index 0000000..d5d3974
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-livepatch
@@ -0,0 +1,56 @@
+What:		/sys/kernel/livepatch
+Date:		Nov 2014
+KernelVersion:	3.19.0
+Contact:	live-patching@vger.kernel.org
+Description:
+		Interface for kernel live patching
+
+		The /sys/kernel/livepatch directory contains subdirectories for
+		each loaded live patch module.
+
+What:		/sys/kernel/livepatch/<patch>
+Date:		Nov 2014
+KernelVersion:	3.19.0
+Contact:	live-patching@vger.kernel.org
+Description:
+		The patch directory contains subdirectories for each kernel
+		object (vmlinux or a module) in which it patched functions.
+
+What:		/sys/kernel/livepatch/<patch>/enabled
+Date:		Nov 2014
+KernelVersion:	3.19.0
+Contact:	live-patching@vger.kernel.org
+Description:
+		A writable attribute that indicates whether the patched
+		code is currently applied.  Writing 0 will disable the patch
+		while writing 1 will re-enable the patch.
+
+What:		/sys/kernel/livepatch/<patch>/transition
+Date:		Feb 2017
+KernelVersion:	4.12.0
+Contact:	live-patching@vger.kernel.org
+Description:
+		An attribute which indicates whether the patch is currently in
+		transition.
+
+What:		/sys/kernel/livepatch/<patch>/<object>
+Date:		Nov 2014
+KernelVersion:	3.19.0
+Contact:	live-patching@vger.kernel.org
+Description:
+		The object directory contains subdirectories for each function
+		that is patched within the object.
+
+What:		/sys/kernel/livepatch/<patch>/<object>/<function,sympos>
+Date:		Nov 2014
+KernelVersion:	3.19.0
+Contact:	live-patching@vger.kernel.org
+Description:
+		The function directory contains attributes regarding the
+		properties and state of the patched function.
+
+		The directory name contains the patched function name and a
+		sympos number corresponding to the nth occurrence of the symbol
+		name in kallsyms for the patched object.
+
+		There are currently no such attributes.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-mm b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-mm
new file mode 100644
index 0000000..190d523
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-mm
@@ -0,0 +1,6 @@
+What:		/sys/kernel/mm
+Date:		July 2008
+Contact:	Nishanth Aravamudan <nacc@us.ibm.com>, VM maintainers
+Description:
+		/sys/kernel/mm/ should contain any and all VM
+		related information in /sys/kernel/.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-mm-hugepages b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-mm-hugepages
new file mode 100644
index 0000000..e21c005
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-mm-hugepages
@@ -0,0 +1,15 @@
+What:		/sys/kernel/mm/hugepages/
+Date:		June 2008
+Contact:	Nishanth Aravamudan <nacc@us.ibm.com>, hugetlb maintainers
+Description:
+		/sys/kernel/mm/hugepages/ contains a number of subdirectories
+		of the form hugepages-<size>kB, where <size> is the page size
+		of the hugepages supported by the kernel/CPU combination.
+
+		Under these directories are a number of files:
+			nr_hugepages
+			nr_overcommit_hugepages
+			free_hugepages
+			surplus_hugepages
+			resv_hugepages
+		See Documentation/vm/hugetlbpage.txt for details.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-mm-ksm b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-mm-ksm
new file mode 100644
index 0000000..73e653e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-mm-ksm
@@ -0,0 +1,52 @@
+What:		/sys/kernel/mm/ksm
+Date:		September 2009
+KernelVersion:	2.6.32
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Interface for Kernel Samepage Merging (KSM)
+
+What:		/sys/kernel/mm/ksm/full_scans
+What:		/sys/kernel/mm/ksm/pages_shared
+What:		/sys/kernel/mm/ksm/pages_sharing
+What:		/sys/kernel/mm/ksm/pages_to_scan
+What:		/sys/kernel/mm/ksm/pages_unshared
+What:		/sys/kernel/mm/ksm/pages_volatile
+What:		/sys/kernel/mm/ksm/run
+What:		/sys/kernel/mm/ksm/sleep_millisecs
+Date:		September 2009
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Kernel Samepage Merging daemon sysfs interface
+
+		full_scans: how many times all mergeable areas have been
+		scanned.
+
+		pages_shared: how many shared pages are being used.
+
+		pages_sharing: how many more sites are sharing them i.e. how
+		much saved.
+
+		pages_to_scan: how many present pages to scan before ksmd goes
+		to sleep.
+
+		pages_unshared: how many pages unique but repeatedly checked
+		for merging.
+
+		pages_volatile: how many pages changing too fast to be placed
+		in a tree.
+
+		run: write 0 to disable ksm, read 0 while ksm is disabled.
+			write 1 to run ksm, read 1 while ksm is running.
+			write 2 to disable ksm and unmerge all its pages.
+
+		sleep_millisecs: how many milliseconds ksm should sleep between
+		scans.
+
+		See Documentation/vm/ksm.txt for more information.
+
+What:		/sys/kernel/mm/ksm/merge_across_nodes
+Date:		January 2013
+KernelVersion:	3.9
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Control merging pages across different NUMA nodes.
+
+		When it is set to 0 only pages from the same node are merged,
+		otherwise pages from all nodes can be merged together (default).
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-mm-swap b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-mm-swap
new file mode 100644
index 0000000..9467201
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-mm-swap
@@ -0,0 +1,16 @@
+What:		/sys/kernel/mm/swap/
+Date:		August 2017
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Interface for swapping
+
+What:		/sys/kernel/mm/swap/vma_ra_enabled
+Date:		August 2017
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Enable/disable VMA based swap readahead.
+
+		If set to true, the VMA based swap readahead algorithm
+		will be used for swappable anonymous pages mapped in a
+		VMA, and the global swap readahead algorithm will be
+		still used for tmpfs etc. other users.  If set to
+		false, the global swap readahead algorithm will be
+		used for all swappable pages.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-slab b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-slab
new file mode 100644
index 0000000..2cc0a72
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-slab
@@ -0,0 +1,490 @@
+What:		/sys/kernel/slab
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The /sys/kernel/slab directory contains a snapshot of the
+		internal state of the SLUB allocator for each cache.  Certain
+		files may be modified to change the behavior of the cache (and
+		any cache it aliases, if any).
+Users:		kernel memory tuning tools
+
+What:		/sys/kernel/slab/cache/aliases
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The aliases file is read-only and specifies how many caches
+		have merged into this cache.
+
+What:		/sys/kernel/slab/cache/align
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The align file is read-only and specifies the cache's object
+		alignment in bytes.
+
+What:		/sys/kernel/slab/cache/alloc_calls
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_calls file is read-only and lists the kernel code
+		locations from which allocations for this cache were performed.
+		The alloc_calls file only contains information if debugging is
+		enabled for that cache (see Documentation/vm/slub.txt).
+
+What:		/sys/kernel/slab/cache/alloc_fastpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_fastpath file shows how many objects have been
+		allocated using the fast path.  It can be written to clear the
+		current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_from_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_from_partial file shows how many times a cpu slab has
+		been full and it has been refilled by using a slab from the list
+		of partially used slabs.  It can be written to clear the current
+		count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_refill
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_refill file shows how many times the per-cpu freelist
+		was empty but there were objects available as the result of
+		remote cpu frees.  It can be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_slab
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_slab file is shows how many times a new slab had to
+		be allocated from the page allocator.  It can be written to
+		clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_slowpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_slowpath file shows how many objects have been
+		allocated using the slow path because of a refill or
+		allocation from a partial or new slab.  It can be written to
+		clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/cache_dma
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The cache_dma file is read-only and specifies whether objects
+		are from ZONE_DMA.
+		Available when CONFIG_ZONE_DMA is enabled.
+
+What:		/sys/kernel/slab/cache/cpu_slabs
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The cpu_slabs file is read-only and displays how many cpu slabs
+		are active and their NUMA locality.
+
+What:		/sys/kernel/slab/cache/cpuslab_flush
+Date:		April 2009
+KernelVersion:	2.6.31
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file cpuslab_flush shows how many times a cache's cpu slabs
+		have been flushed as the result of destroying or shrinking a
+		cache, a cpu going offline, or as the result of forcing an
+		allocation from a certain node.  It can be written to clear the
+		current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/ctor
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The ctor file is read-only and specifies the cache's object
+		constructor function, which is invoked for each object when a
+		new slab is allocated.
+
+What:		/sys/kernel/slab/cache/deactivate_empty
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The deactivate_empty file shows how many times an empty cpu slab
+		was deactivated.  It can be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_full
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The deactivate_full file shows how many times a full cpu slab
+		was deactivated.  It can be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_remote_frees
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The deactivate_remote_frees file shows how many times a cpu slab
+		has been deactivated and contained free objects that were freed
+		remotely.  It can be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_to_head
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The deactivate_to_head file shows how many times a partial cpu
+		slab was deactivated and added to the head of its node's partial
+		list.  It can be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_to_tail
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The deactivate_to_tail file shows how many times a partial cpu
+		slab was deactivated and added to the tail of its node's partial
+		list.  It can be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/destroy_by_rcu
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The destroy_by_rcu file is read-only and specifies whether
+		slabs (not objects) are freed by rcu.
+
+What:		/sys/kernel/slab/cache/free_add_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_add_partial file shows how many times an object has
+		been freed in a full slab so that it had to added to its node's
+		partial list.  It can be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_calls
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_calls file is read-only and lists the locations of
+		object frees if slab debugging is enabled (see
+		Documentation/vm/slub.txt).
+
+What:		/sys/kernel/slab/cache/free_fastpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_fastpath file shows how many objects have been freed
+		using the fast path because it was an object from the cpu slab.
+		It can be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_frozen
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_frozen file shows how many objects have been freed to
+		a frozen slab (i.e. a remote cpu slab).  It can be written to
+		clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_remove_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_remove_partial file shows how many times an object has
+		been freed to a now-empty slab so that it had to be removed from
+		its node's partial list.  It can be written to clear the current
+		count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_slab
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_slab file shows how many times an empty slab has been
+		freed back to the page allocator.  It can be written to clear
+		the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_slowpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_slowpath file shows how many objects have been freed
+		using the slow path (i.e. to a full or partial slab).  It can
+		be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/hwcache_align
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The hwcache_align file is read-only and specifies whether
+		objects are aligned on cachelines.
+
+What:		/sys/kernel/slab/cache/min_partial
+Date:		February 2009
+KernelVersion:	2.6.30
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		David Rientjes <rientjes@google.com>
+Description:
+		The min_partial file specifies how many empty slabs shall
+		remain on a node's partial list to avoid the overhead of
+		allocating new slabs.  Such slabs may be reclaimed by utilizing
+		the shrink file.
+
+What:		/sys/kernel/slab/cache/object_size
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The object_size file is read-only and specifies the cache's
+		object size.
+
+What:		/sys/kernel/slab/cache/objects
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The objects file is read-only and displays how many objects are
+		active and from which nodes they are from.
+
+What:		/sys/kernel/slab/cache/objects_partial
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The objects_partial file is read-only and displays how many
+		objects are on partial slabs and from which nodes they are
+		from.
+
+What:		/sys/kernel/slab/cache/objs_per_slab
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file objs_per_slab is read-only and specifies how many
+		objects may be allocated from a single slab of the order
+		specified in /sys/kernel/slab/cache/order.
+
+What:		/sys/kernel/slab/cache/order
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The order file specifies the page order at which new slabs are
+		allocated.  It is writable and can be changed to increase the
+		number of objects per slab.  If a slab cannot be allocated
+		because of fragmentation, SLUB will retry with the minimum order
+		possible depending on its characteristics.
+		When debug_guardpage_minorder=N (N > 0) parameter is specified
+		(see Documentation/admin-guide/kernel-parameters.rst), the minimum possible
+		order is used and this sysfs entry can not be used to change
+		the order at run time.
+
+What:		/sys/kernel/slab/cache/order_fallback
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The order_fallback file shows how many times an allocation of a
+		new slab has not been possible at the cache's order and instead
+		fallen back to its minimum possible order.  It can be written to
+		clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/partial
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The partial file is read-only and displays how long many
+		partial slabs there are and how long each node's list is.
+
+What:		/sys/kernel/slab/cache/poison
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The poison file specifies whether objects should be poisoned
+		when a new slab is allocated.
+
+What:		/sys/kernel/slab/cache/reclaim_account
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The reclaim_account file specifies whether the cache's objects
+		are reclaimable (and grouped by their mobility).
+
+What:		/sys/kernel/slab/cache/red_zone
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The red_zone file specifies whether the cache's objects are red
+		zoned.
+
+What:		/sys/kernel/slab/cache/remote_node_defrag_ratio
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file remote_node_defrag_ratio specifies the percentage of
+		times SLUB will attempt to refill the cpu slab with a partial
+		slab from a remote node as opposed to allocating a new slab on
+		the local node.  This reduces the amount of wasted memory over
+		the entire system but can be expensive.
+		Available when CONFIG_NUMA is enabled.
+
+What:		/sys/kernel/slab/cache/sanity_checks
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The sanity_checks file specifies whether expensive checks
+		should be performed on free and, at minimum, enables double free
+		checks.  Caches that enable sanity_checks cannot be merged with
+		caches that do not.
+
+What:		/sys/kernel/slab/cache/shrink
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The shrink file is written when memory should be reclaimed from
+		a cache.  Empty partial slabs are freed and the partial list is
+		sorted so the slabs with the fewest available objects are used
+		first.
+
+What:		/sys/kernel/slab/cache/slab_size
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The slab_size file is read-only and specifies the object size
+		with metadata (debugging information and alignment) in bytes.
+
+What:		/sys/kernel/slab/cache/slabs
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The slabs file is read-only and displays how long many slabs
+		there are (both cpu and partial) and from which nodes they are
+		from.
+
+What:		/sys/kernel/slab/cache/store_user
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The store_user file specifies whether the location of
+		allocation or free should be tracked for a cache.
+
+What:		/sys/kernel/slab/cache/total_objects
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The total_objects file is read-only and displays how many total
+		objects a cache has and from which nodes they are from.
+
+What:		/sys/kernel/slab/cache/trace
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The trace file specifies whether object allocations and frees
+		should be traced.
+
+What:		/sys/kernel/slab/cache/validate
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		Writing to the validate file causes SLUB to traverse all of its
+		cache's objects and check the validity of metadata.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-uids b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-uids
new file mode 100644
index 0000000..28f1469
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-uids
@@ -0,0 +1,14 @@
+What:		/sys/kernel/uids/<uid>/cpu_shares
+Date:		December 2007
+Contact:	Dhaval Giani <dhaval@linux.vnet.ibm.com>
+		Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
+Description:
+		The /sys/kernel/uids/<uid>/cpu_shares tunable is used
+		to set the cpu bandwidth a user is allowed. This is a
+		propotional value. What that means is that if there
+		are two users logged in, each with an equal number of
+		shares, then they will get equal CPU bandwidth. Another
+		example would be, if User A has shares = 1024 and user
+		B has shares = 2048, User B will get twice the CPU
+		bandwidth user A will. For more details refer
+		Documentation/scheduler/sched-design-CFS.txt
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-vmcoreinfo b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-vmcoreinfo
new file mode 100644
index 0000000..7bd8116
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-vmcoreinfo
@@ -0,0 +1,14 @@
+What:		/sys/kernel/vmcoreinfo
+Date:		October 2007
+KernelVersion:	2.6.24
+Contact:	Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp>
+		Kexec Mailing List <kexec@lists.infradead.org>
+		Vivek Goyal <vgoyal@redhat.com>
+Description
+		Shows physical address and size of vmcoreinfo ELF note.
+		First value contains physical address of note in hex and
+		second value contains the size of note in hex. This ELF
+		note info is parsed by second kernel and exported to user
+		space as part of ELF note in /proc/vmcore file. This note
+		contains various information like struct size, symbol
+		values, page size etc.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-wakeup_reasons b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-wakeup_reasons
new file mode 100644
index 0000000..acb19b9
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-kernel-wakeup_reasons
@@ -0,0 +1,16 @@
+What:		/sys/kernel/wakeup_reasons/last_resume_reason
+Date:		February 2014
+Contact:	Ruchi Kandoi <kandoiruchi@google.com>
+Description:
+		The /sys/kernel/wakeup_reasons/last_resume_reason is
+		used to report wakeup reasons after system exited suspend.
+
+What:		/sys/kernel/wakeup_reasons/last_suspend_time
+Date:		March 2015
+Contact:	jinqian <jinqian@google.com>
+Description:
+		The /sys/kernel/wakeup_reasons/last_suspend_time is
+		used to report time spent in last suspend cycle. It contains
+		two numbers (in seconds) separated by space. First number is
+		the time spent in suspend and resume processes. Second number
+		is the time spent in sleep state.
\ No newline at end of file
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-memory-page-offline b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-memory-page-offline
new file mode 100644
index 0000000..e14703f
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-memory-page-offline
@@ -0,0 +1,44 @@
+What:		/sys/devices/system/memory/soft_offline_page
+Date:		Sep 2009
+KernelVersion:	2.6.33
+Contact:	andi@firstfloor.org
+Description:
+		Soft-offline the memory page containing the physical address
+		written into this file. Input is a hex number specifying the
+		physical address of the page. The kernel will then attempt
+		to soft-offline it, by moving the contents elsewhere or
+		dropping it if possible. The kernel will then be placed
+		on the bad page list and never be reused.
+
+		The offlining is done in kernel specific granuality.
+		Normally it's the base page size of the kernel, but
+		this might change.
+
+		The page must be still accessible, not poisoned. The
+		kernel will never kill anything for this, but rather
+		fail the offline.  Return value is the size of the
+		number, or a error when the offlining failed.  Reading
+		the file is not allowed.
+
+What:		/sys/devices/system/memory/hard_offline_page
+Date:		Sep 2009
+KernelVersion:	2.6.33
+Contact:	andi@firstfloor.org
+Description:
+		Hard-offline the memory page containing the physical
+		address written into this file. Input is a hex number
+		specifying the physical address of the page. The
+		kernel will then attempt to hard-offline the page, by
+		trying to drop the page or killing any owner or
+		triggering IO errors if needed.  Note this may kill
+		any processes owning the page. The kernel will avoid
+		to access this page assuming it's poisoned by the
+		hardware.
+
+		The offlining is done in kernel specific granuality.
+		Normally it's the base page size of the kernel, but
+		this might change.
+
+		Return value is the size of the number, or a error when
+		the offlining failed.
+		Reading the file is not allowed.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-module b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-module
new file mode 100644
index 0000000..0aac02e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-module
@@ -0,0 +1,52 @@
+What:		/sys/module/pch_phub/drivers/.../pch_mac
+Date:		August 2010
+KernelVersion:	2.6.35
+Contact:	masa-korg@dsn.okisemi.com
+Description:	Write/read GbE MAC address.
+
+What:		/sys/module/pch_phub/drivers/.../pch_firmware
+Date:		August 2010
+KernelVersion:	2.6.35
+Contact:	masa-korg@dsn.okisemi.com
+Description:	Write/read Option ROM data.
+
+
+What:		/sys/module/ehci_hcd/drivers/.../uframe_periodic_max
+Date:		July 2011
+KernelVersion:	3.1
+Contact:	Kirill Smelkov <kirr@mns.spb.ru>
+Description:	Maximum time allowed for periodic transfers per microframe (μs)
+
+		[ USB 2.0 sets maximum allowed time for periodic transfers per
+		  microframe to be 80%, that is 100 microseconds out of 125
+		  microseconds (full microframe).
+
+		  However there are cases, when 80% max isochronous bandwidth is
+		  too limiting. For example two video streams could require 110
+		  microseconds of isochronous bandwidth per microframe to work
+		  together. ]
+
+		Through this setting it is possible to raise the limit so that
+		the host controller would allow allocating more than 100
+		microseconds of periodic bandwidth per microframe.
+
+		Beware, non-standard modes are usually not thoroughly tested by
+		hardware designers, and the hardware can malfunction when this
+		setting differ from default 100.
+
+What:		/sys/module/*/{coresize,initsize}
+Date:		Jan 2012
+KernelVersion:»·3.3
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:	Module size in bytes.
+
+What:		/sys/module/*/taint
+Date:		Jan 2012
+KernelVersion:»·3.3
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:	Module taint flags:
+			P - proprietary module
+			O - out-of-tree module
+			F - force-loaded module
+			C - staging driver module
+			E - unsigned module
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-ocfs2 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-ocfs2
new file mode 100644
index 0000000..b7cc516
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-ocfs2
@@ -0,0 +1,89 @@
+What:		/sys/fs/ocfs2/
+Date:		April 2008
+Contact:	ocfs2-devel@oss.oracle.com
+Description:
+		The /sys/fs/ocfs2 directory contains knobs used by the
+		ocfs2-tools to interact with the filesystem.
+
+What:		/sys/fs/ocfs2/max_locking_protocol
+Date:		April 2008
+Contact:	ocfs2-devel@oss.oracle.com
+Description:
+		The /sys/fs/ocfs2/max_locking_protocol file displays version
+		of ocfs2 locking supported by the filesystem.  This version
+		covers how ocfs2 uses distributed locking between cluster
+		nodes.
+
+		The protocol version has a major and minor number.  Two
+		cluster nodes can interoperate if they have an identical
+		major number and an overlapping minor number - thus,
+		a node with version 1.10 can interoperate with a node
+		sporting version 1.8, as long as both use the 1.8 protocol.
+
+		Reading from this file returns a single line, the major
+		number and minor number joined by a period, eg "1.10".
+
+		This file is read-only.  The value is compiled into the
+		driver.
+
+What:		/sys/fs/ocfs2/loaded_cluster_plugins
+Date:		April 2008
+Contact:	ocfs2-devel@oss.oracle.com
+Description:
+		The /sys/fs/ocfs2/loaded_cluster_plugins file describes
+		the available plugins to support ocfs2 cluster operation.
+		A cluster plugin is required to use ocfs2 in a cluster.
+		There are currently two available plugins:
+
+		* 'o2cb' - The classic o2cb cluster stack that ocfs2 has
+			used since its inception.
+		* 'user' - A plugin supporting userspace cluster software
+			in conjunction with fs/dlm.
+
+		Reading from this file returns the names of all loaded
+		plugins, one per line.
+
+		This file is read-only.  Its contents may change as
+		plugins are loaded or removed.
+
+What:		/sys/fs/ocfs2/active_cluster_plugin
+Date:		April 2008
+Contact:	ocfs2-devel@oss.oracle.com
+Description:
+		The /sys/fs/ocfs2/active_cluster_plugin displays which
+		cluster plugin is currently in use by the filesystem.
+		The active plugin will appear in the loaded_cluster_plugins
+		file as well.  Only one plugin can be used at a time.
+
+		Reading from this file returns the name of the active plugin
+		on a single line.
+
+		This file is read-only.  Which plugin is active depends on
+		the cluster stack in use.  The contents may change
+		when all filesystems are unmounted and the cluster stack
+		is changed.
+
+What:		/sys/fs/ocfs2/cluster_stack
+Date:		April 2008
+Contact:	ocfs2-devel@oss.oracle.com
+Description:
+		The /sys/fs/ocfs2/cluster_stack file contains the name
+		of current ocfs2 cluster stack.  This value is set by
+		userspace tools when bringing the cluster stack online.
+
+		Cluster stack names are 4 characters in length.
+
+		When the 'o2cb' cluster stack is used, the 'o2cb' cluster
+		plugin is active.  All other cluster stacks use the 'user'
+		cluster plugin.
+
+		Reading from this file returns the name of the current
+		cluster stack on a single line.
+
+		Writing a new stack name to this file changes the current
+		cluster stack unless there are mounted ocfs2 filesystems.
+		If there are mounted filesystems, attempts to change the
+		stack return an error.
+
+Users:
+	ocfs2-tools <ocfs2-tools-devel@oss.oracle.com>
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-asus-laptop b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-asus-laptop
new file mode 100644
index 0000000..cd9d667
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-asus-laptop
@@ -0,0 +1,66 @@
+What:		/sys/devices/platform/asus_laptop/display
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		This file allows display switching. The value
+		is composed by 4 bits and defined as follow:
+		4321
+		|||`- LCD
+		||`-- CRT
+		|`--- TV
+		`---- DVI
+		Ex: - 0 (0000b) means no display
+		    - 3 (0011b) CRT+LCD.
+
+What:		/sys/devices/platform/asus_laptop/gps
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the gps device. 1 means on, 0 means off.
+Users:		Lapsus
+
+What:		/sys/devices/platform/asus_laptop/ledd
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Some models like the W1N have a LED display that can be
+		used to display several items of information.
+		To control the LED display, use the following :
+		    echo 0x0T000DDD > /sys/devices/platform/asus_laptop/
+		where T control the 3 letters display, and DDD the 3 digits display.
+		The DDD table can be found in Documentation/laptops/asus-laptop.txt
+
+What:		/sys/devices/platform/asus_laptop/bluetooth
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the bluetooth device. 1 means on, 0 means off.
+		This may control the led, the device or both.
+Users:		Lapsus
+
+What:		/sys/devices/platform/asus_laptop/wlan
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the wlan device. 1 means on, 0 means off.
+		This may control the led, the device or both.
+Users:		Lapsus
+
+What:		/sys/devices/platform/asus_laptop/wimax
+Date:		October 2010
+KernelVersion:	2.6.37
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the wimax device. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/asus_laptop/wwan
+Date:		October 2010
+KernelVersion:	2.6.37
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the wwan (3G) device. 1 means on, 0 means off.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-asus-wmi b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-asus-wmi
new file mode 100644
index 0000000..019e1e2
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-asus-wmi
@@ -0,0 +1,38 @@
+What:		/sys/devices/platform/<platform>/cpufv
+Date:		Oct 2010
+KernelVersion:	2.6.37
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Change CPU clock configuration (write-only).
+		There are three available clock configuration:
+		    * 0 -> Super Performance Mode
+		    * 1 -> High Performance Mode
+		    * 2 -> Power Saving Mode
+
+What:		/sys/devices/platform/<platform>/camera
+Date:		Jan 2010
+KernelVersion:	2.6.39
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the camera. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/<platform>/cardr
+Date:		Jan 2010
+KernelVersion:	2.6.39
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the card reader. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/<platform>/touchpad
+Date:		Jan 2010
+KernelVersion:	2.6.39
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the card touchpad. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/<platform>/lid_resume
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	"AceLan Kao" <acelan.kao@canonical.com>
+Description:
+		Resume on lid open. 1 means on, 0 means off.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-at91 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-at91
new file mode 100644
index 0000000..4cc6a86
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-at91
@@ -0,0 +1,25 @@
+What:		/sys/devices/platform/at91_can/net/<iface>/mb0_id
+Date:		January 2011
+KernelVersion:	2.6.38
+Contact:	Marc Kleine-Budde <kernel@pengutronix.de>
+Description:
+		Value representing the can_id of mailbox 0.
+
+		Default: 0x7ff (standard frame)
+
+		Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in
+		"AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the
+		contents of mailbox 0 may be send under certain
+		conditions (even if disabled or in rx mode).
+
+		The workaround in the errata suggests not to use the
+		mailbox and load it with an unused identifier.
+
+		In order to use an extended can_id add the
+		CAN_EFF_FLAG (0x80000000U) to the can_id. Example:
+
+		- standard id 0x7ff:
+		echo 0x7ff      > /sys/class/net/can0/mb0_id
+
+		- extended id 0x1fffffff:
+		echo 0x9fffffff > /sys/class/net/can0/mb0_id
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-brcmstb-gisb-arb b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-brcmstb-gisb-arb
new file mode 100644
index 0000000..f1bad92
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-brcmstb-gisb-arb
@@ -0,0 +1,8 @@
+What:		/sys/devices/../../gisb_arb_timeout
+Date:		May 2014
+KernelVersion:	3.17
+Contact:	Florian Fainelli <f.fainelli@gmail.com>
+Description:
+		Returns the currently configured raw timeout value of the
+		Broadcom Set Top Box internal GISB bus arbiter. Minimum value
+		is 1, and maximum value is 0xffffffff.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg
new file mode 100644
index 0000000..151c595
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg
@@ -0,0 +1,56 @@
+What:		/sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
+Date:		Feb 2014
+Contact:	Li Jun <b47624@freescale.com>
+Description:
+		Can be set and read.
+		Set a_bus_req(A-device bus request) input to be 1 if
+		the application running on the A-device wants to use the bus,
+		and to be 0 when the application no longer wants to use
+		the bus(or wants to work as peripheral). a_bus_req can also
+		be set to 1 by kernel in response to remote wakeup signaling
+		from the B-device, the A-device should decide to resume the bus.
+
+		Valid values are "1" and "0".
+
+		Reading: returns 1 if the application running on the A-device
+		is using the bus as host role, otherwise 0.
+
+What:		/sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
+Date:		Feb 2014
+Contact:	Li Jun <b47624@freescale.com>
+Description:
+		Can be set and read
+		The a_bus_drop(A-device bus drop) input is 1 when the
+		application running on the A-device wants to power down
+		the bus, and is 0 otherwise, When a_bus_drop is 1, then
+		the a_bus_req shall be 0.
+
+		Valid values are "1" and "0".
+
+		Reading: returns 1 if the bus is off(vbus is turned off) by
+			 A-device, otherwise 0.
+
+What:		/sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
+Date:		Feb 2014
+Contact:	Li Jun <b47624@freescale.com>
+Description:
+		Can be set and read.
+		The b_bus_req(B-device bus request) input is 1 during the time
+		that the application running on the B-device wants to use the
+		bus as host, and is 0 when the application no longer wants to
+		work as host and decides to switch back to be peripheral.
+
+		Valid values are "1" and "0".
+
+		Reading: returns if the application running on the B device
+		is using the bus as host role, otherwise 0.
+
+What:		/sys/bus/platform/devices/ci_hdrc.0/inputs/a_clr_err
+Date:		Feb 2014
+Contact:	Li Jun <b47624@freescale.com>
+Description:
+		Only can be set.
+		The a_clr_err(A-device Vbus error clear) input is used to clear
+		vbus error, then A-device will power down the bus.
+
+		Valid value is "1"
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-chipidea-usb2 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-chipidea-usb2
new file mode 100644
index 0000000..b0f4684
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-chipidea-usb2
@@ -0,0 +1,9 @@
+What:		/sys/bus/platform/devices/ci_hdrc.0/role
+Date:		Mar 2017
+Contact:	Peter Chen <peter.chen@nxp.com>
+Description:
+		It returns string "gadget" or "host" when read it, it indicates
+		current controller role.
+
+		It will do role switch when write "gadget" or "host" to it.
+		Only controller at dual-role configuration supports writing.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-dell-laptop b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-dell-laptop
new file mode 100644
index 0000000..8c6a0b8
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-dell-laptop
@@ -0,0 +1,69 @@
+What:		/sys/class/leds/dell::kbd_backlight/als_enabled
+Date:		December 2014
+KernelVersion:	3.19
+Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
+		Pali Rohár <pali.rohar@gmail.com>
+Description:
+		This file allows to control the automatic keyboard
+		illumination mode on some systems that have an ambient
+		light sensor. Write 1 to this file to enable the auto
+		mode, 0 to disable it.
+
+What:		/sys/class/leds/dell::kbd_backlight/als_setting
+Date:		December 2014
+KernelVersion:	3.19
+Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
+		Pali Rohár <pali.rohar@gmail.com>
+Description:
+		This file allows to specifiy the on/off threshold value,
+		as reported by the ambient light sensor.
+
+What:		/sys/class/leds/dell::kbd_backlight/start_triggers
+Date:		December 2014
+KernelVersion:	3.19
+Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
+		Pali Rohár <pali.rohar@gmail.com>
+Description:
+		This file allows to control the input triggers that
+		turn on the keyboard backlight illumination that is
+		disabled because of inactivity.
+		Read the file to see the triggers available. The ones
+		enabled are preceded by '+', those disabled by '-'.
+
+		To enable a trigger, write its name preceded by '+' to
+		this file. To disable a trigger, write its name preceded
+		by '-' instead.
+
+		For example, to enable the keyboard as trigger run:
+		    echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
+		To disable it:
+		    echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
+
+		Note that not all the available triggers can be configured.
+
+What:		/sys/class/leds/dell::kbd_backlight/stop_timeout
+Date:		December 2014
+KernelVersion:	3.19
+Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
+		Pali Rohár <pali.rohar@gmail.com>
+Description:
+		This file allows to specify the interval after which the
+		keyboard illumination is disabled because of inactivity.
+		The timeouts are expressed in seconds, minutes, hours and
+		days, for which the symbols are 's', 'm', 'h' and 'd'
+		respectively.
+
+		To configure the timeout, write to this file a value along
+		with any the above units. If no unit is specified, the value
+		is assumed to be expressed in seconds.
+
+		For example, to set the timeout to 10 minutes run:
+		    echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout
+
+		Note that when this file is read, the returned value might be
+		expressed in a different unit than the one used when the timeout
+		was set.
+
+		Also note that only some timeouts are supported and that
+		some systems might fall back to a specific timeout in case
+		an invalid timeout is written to this file.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-eeepc-laptop b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-eeepc-laptop
new file mode 100644
index 0000000..5b026c6
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-eeepc-laptop
@@ -0,0 +1,50 @@
+What:		/sys/devices/platform/eeepc/disp
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		This file allows display switching.
+		- 1 = LCD
+		- 2 = CRT
+		- 3 = LCD+CRT
+		If you run X11, you should use xrandr instead.
+
+What:		/sys/devices/platform/eeepc/camera
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the camera. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/eeepc/cardr
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the card reader. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/eeepc/cpufv
+Date:		Jun 2009
+KernelVersion:	2.6.31
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Change CPU clock configuration.
+		On the Eee PC 1000H there are three available clock configuration:
+		    * 0 -> Super Performance Mode
+		    * 1 -> High Performance Mode
+		    * 2 -> Power Saving Mode
+		On Eee PC 701 there is only 2 available clock configurations.
+		Available configuration are listed in available_cpufv file.
+		Reading this file will show the raw hexadecimal value which
+		is defined as follow:
+		| 8 bit | 8 bit |
+		    |       `---- Current mode
+		    `------------ Availables modes
+		For example, 0x301 means: mode 1 selected, 3 available modes.
+
+What:		/sys/devices/platform/eeepc/available_cpufv
+Date:		Jun 2009
+KernelVersion:	2.6.31
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		List available cpufv modes.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-hidma b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-hidma
new file mode 100644
index 0000000..fca40a5
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-hidma
@@ -0,0 +1,9 @@
+What:		/sys/devices/platform/hidma-*/chid
+		/sys/devices/platform/QCOM8061:*/chid
+Date:		Dec 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Description:
+		Contains the ID of the channel within the HIDMA instance.
+		It is used to associate a given HIDMA channel with the
+		priority and weight calls in the management interface.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-hidma-mgmt b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-hidma-mgmt
new file mode 100644
index 0000000..3b6c5c9
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-hidma-mgmt
@@ -0,0 +1,97 @@
+What:		/sys/devices/platform/hidma-mgmt*/chanops/chan*/priority
+		/sys/devices/platform/QCOM8060:*/chanops/chan*/priority
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Description:
+		Contains either 0 or 1 and indicates if the DMA channel is a
+		low priority (0) or high priority (1) channel.
+
+What:		/sys/devices/platform/hidma-mgmt*/chanops/chan*/weight
+		/sys/devices/platform/QCOM8060:*/chanops/chan*/weight
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Description:
+		Contains 0..15 and indicates the weight of the channel among
+		equal priority channels during round robin scheduling.
+
+What:		/sys/devices/platform/hidma-mgmt*/chreset_timeout_cycles
+		/sys/devices/platform/QCOM8060:*/chreset_timeout_cycles
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Description:
+		Contains the platform specific cycle value to wait after a
+		reset command is issued. If the value is chosen too short,
+		then the HW will issue a reset failure interrupt. The value
+		is platform specific and should not be changed without
+		consultance.
+
+What:		/sys/devices/platform/hidma-mgmt*/dma_channels
+		/sys/devices/platform/QCOM8060:*/dma_channels
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Description:
+		Contains the number of dma channels supported by one instance
+		of HIDMA hardware. The value may change from chip to chip.
+
+What:		/sys/devices/platform/hidma-mgmt*/hw_version_major
+		/sys/devices/platform/QCOM8060:*/hw_version_major
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Description:
+		Version number major for the hardware.
+
+What:		/sys/devices/platform/hidma-mgmt*/hw_version_minor
+		/sys/devices/platform/QCOM8060:*/hw_version_minor
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Description:
+		Version number minor for the hardware.
+
+What:		/sys/devices/platform/hidma-mgmt*/max_rd_xactions
+		/sys/devices/platform/QCOM8060:*/max_rd_xactions
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Description:
+		Contains a value between 0 and 31. Maximum number of
+		read transactions that can be issued back to back.
+		Choosing a higher number gives better performance but
+		can also cause performance reduction to other peripherals
+		sharing the same bus.
+
+What:		/sys/devices/platform/hidma-mgmt*/max_read_request
+		/sys/devices/platform/QCOM8060:*/max_read_request
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Description:
+		Size of each read request. The value needs to be a power
+		of two and can be between 128 and 1024.
+
+What:		/sys/devices/platform/hidma-mgmt*/max_wr_xactions
+		/sys/devices/platform/QCOM8060:*/max_wr_xactions
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Description:
+		Contains a value between 0 and 31. Maximum number of
+		write transactions that can be issued back to back.
+		Choosing a higher number gives better performance but
+		can also cause performance reduction to other peripherals
+		sharing the same bus.
+
+
+What:		/sys/devices/platform/hidma-mgmt*/max_write_request
+		/sys/devices/platform/QCOM8060:*/max_write_request
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Description:
+		Size of each write request. The value needs to be a power
+		of two and can be between 128 and 1024.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl
new file mode 100644
index 0000000..3c35148
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl
@@ -0,0 +1,18 @@
+What:		/sys/devices/platform/<i2c-demux-name>/available_masters
+Date:		January 2016
+KernelVersion:	4.6
+Contact:	Wolfram Sang <wsa@the-dreams.de>
+Description:
+		Reading the file will give you a list of masters which can be
+		selected for a demultiplexed bus. The format is
+		"<index>:<name>". Example from a Renesas Lager board:
+
+		0:/i2c@e6500000 1:/i2c@e6508000
+
+What:		/sys/devices/platform/<i2c-demux-name>/current_master
+Date:		January 2016
+KernelVersion:	4.6
+Contact:	Wolfram Sang <wsa@the-dreams.de>
+Description:
+		This file selects/shows the active I2C master for a demultiplexed
+		bus. It uses the <index> value from the file 'available_masters'.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-ideapad-laptop b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-ideapad-laptop
new file mode 100644
index 0000000..597a2f3
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-ideapad-laptop
@@ -0,0 +1,27 @@
+What:		/sys/devices/platform/ideapad/camera_power
+Date:		Dec 2010
+KernelVersion:	2.6.37
+Contact:	"Ike Panhc <ike.pan@canonical.com>"
+Description:
+		Control the power of camera module. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/ideapad/fan_mode
+Date:		June 2012
+KernelVersion:	3.6
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Change fan mode
+		There are four available modes:
+			* 0 -> Super Silent Mode
+			* 1 -> Standard Mode
+			* 2 -> Dust Cleaning
+			* 4 -> Efficient Thermal Dissipation Mode
+
+What:		/sys/devices/platform/ideapad/touchpad
+Date:		May 2017
+KernelVersion:	4.13
+Contact:	"Ritesh Raj Sarraf <rrs@debian.org>"
+Description:
+		Control touchpad mode.
+			* 1 -> Switched On
+			* 0 -> Switched Off
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-kim b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-kim
new file mode 100644
index 0000000..c165327
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-kim
@@ -0,0 +1,48 @@
+What:		/sys/devices/platform/kim/dev_name
+Date:		January 2010
+KernelVersion:	2.6.38
+Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
+Description:
+		Name of the UART device at which the WL128x chip
+		is connected. example: "/dev/ttyS0".
+		The device name flows down to architecture specific board
+		initialization file from the SFI/ATAGS bootloader
+		firmware. The name exposed is read from the user-space
+		dameon and opens the device when install is requested.
+
+What:		/sys/devices/platform/kim/baud_rate
+Date:		January 2010
+KernelVersion:	2.6.38
+Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
+Description:
+		The maximum reliable baud-rate the host can support.
+		Different platforms tend to have different high-speed
+		UART configurations, so the baud-rate needs to be set
+		locally and also sent across to the WL128x via a HCI-VS
+		command. The entry is read and made use by the user-space
+		daemon when the ldisc install is requested.
+
+What:		/sys/devices/platform/kim/flow_cntrl
+Date:		January 2010
+KernelVersion:	2.6.38
+Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
+Description:
+		The WL128x makes use of flow control mechanism, and this
+		entry most often should be 1, the host's UART is required
+		to have the capability of flow-control, or else this
+		entry can be made use of for exceptions.
+
+What:		/sys/devices/platform/kim/install
+Date:		January 2010
+KernelVersion:	2.6.38
+Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
+Description:
+		When one of the protocols Bluetooth, FM or GPS wants to make
+		use of the shared UART transport, it registers to the shared
+		transport driver, which will signal the user-space for opening,
+		configuring baud and install line discipline via this sysfs
+		entry. This entry would be polled upon by the user-space
+		daemon managing the UART, and is notified about the change
+		by the sysfs_notify. The value would be '1' when UART needs
+		to be opened/ldisc installed, and would be '0' when UART
+		is no more required and needs to be closed.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-msi-laptop b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-msi-laptop
new file mode 100644
index 0000000..307a247
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-msi-laptop
@@ -0,0 +1,83 @@
+What:		/sys/devices/platform/msi-laptop-pf/lcd_level
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		Screen brightness: contains a single integer in the range 0..8.
+
+What:		/sys/devices/platform/msi-laptop-pf/auto_brightness
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		Enable automatic brightness control: contains either 0 or 1. If
+		set to 1 the hardware adjusts the screen brightness
+		automatically when the power cord is plugged/unplugged.
+
+What:		/sys/devices/platform/msi-laptop-pf/wlan
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		WLAN subsystem enabled: contains either 0 or 1.
+
+What:		/sys/devices/platform/msi-laptop-pf/bluetooth
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		Bluetooth subsystem enabled: contains either 0 or 1. Please
+		note that this file is constantly 0 if no Bluetooth hardware is
+		available.
+
+What:		/sys/devices/platform/msi-laptop-pf/touchpad
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if touchpad is turned on.
+		Touchpad state can only be toggled by pressing Fn+F3.
+
+What:		/sys/devices/platform/msi-laptop-pf/turbo_mode
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if turbo mode is turned
+		on. In turbo mode power LED is orange and processor is
+		overclocked. Turbo mode is available only if charging. It is
+		only possible to toggle turbo mode state by pressing Fn+F10,
+		and there is a few seconds cooldown between subsequent toggles.
+		If user presses Fn+F10 too frequent, turbo mode state is not
+		changed.
+
+What:		/sys/devices/platform/msi-laptop-pf/eco_mode
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if ECO mode is turned on.
+		In ECO mode power LED is green and userspace should do some
+		powersaving actions. ECO mode is available only on battery
+		power. ECO mode can only be toggled by pressing Fn+F10.
+
+What:		/sys/devices/platform/msi-laptop-pf/turbo_cooldown
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains value in range 0..3:
+			* 0 -> Turbo mode is off
+			* 1 -> Turbo mode is on, cannot be turned off yet
+			* 2 -> Turbo mode is off, cannot be turned on yet
+			* 3 -> Turbo mode is on
+
+What:		/sys/devices/platform/msi-laptop-pf/auto_fan
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if fan speed is controlled
+		automatically (1) or fan runs at maximal speed (0). Can be
+		toggled in software.
+
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2
new file mode 100644
index 0000000..6212697
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2
@@ -0,0 +1,15 @@
+What:		/sys/devices/platform/<phy-name>/role
+Date:		October 2016
+KernelVersion:	4.10
+Contact:	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+Description:
+		This file can be read and write.
+		The file can show/change the phy mode for role swap of usb.
+
+		Write the following strings to change the mode:
+		 "host" - switching mode from peripheral to host.
+		 "peripheral" - switching mode from host to peripheral.
+
+		Read the file, then it shows the following strings:
+		 "host" - The mode is host now.
+		 "peripheral" - The mode is peripheral now.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-renesas_usb3 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-renesas_usb3
new file mode 100644
index 0000000..5621c15
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-renesas_usb3
@@ -0,0 +1,15 @@
+What:		/sys/devices/platform/<renesas_usb3's name>/role
+Date:		March 2017
+KernelVersion:	4.13
+Contact:	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+Description:
+		This file can be read and write.
+		The file can show/change the drd mode of usb.
+
+		Write the following string to change the mode:
+		 "host" - switching mode from peripheral to host.
+		 "peripheral" - switching mode from host to peripheral.
+
+		Read the file, then it shows the following strings:
+		 "host" - The mode is host now.
+		 "peripheral" - The mode is peripheral now.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-sst-atom b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-sst-atom
new file mode 100644
index 0000000..0d07c03
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-sst-atom
@@ -0,0 +1,17 @@
+What:		/sys/devices/platform/8086%x:00/firmware_version
+Date:		November 2016
+KernelVersion:	4.10
+Contact:	"Sebastien Guiriec" <sebastien.guiriec@intel.com>
+Description:
+		LPE Firmware version for SST driver on all atom
+		plaforms (BYT/CHT/Merrifield/BSW).
+		If the FW has never been loaded it will display:
+			"FW not yet loaded"
+		If FW has been loaded it will display:
+			"v01.aa.bb.cc"
+		aa: Major version is reflecting SoC version:
+			0d: BYT FW
+			0b: BSW FW
+			07: Merrifield FW
+		bb: Minor version
+		cc: Build version
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-tahvo-usb b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-tahvo-usb
new file mode 100644
index 0000000..f6e20ce
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-tahvo-usb
@@ -0,0 +1,16 @@
+What:		/sys/bus/platform/devices/tahvo-usb/otg_mode
+Date:		December 2013
+Contact:	Aaro Koskinen <aaro.koskinen@iki.fi>
+Description:
+		Set or read the current OTG mode. Valid values are "host" and
+		"peripheral".
+
+		Reading: returns the current mode.
+
+What:		/sys/bus/platform/devices/tahvo-usb/vbus
+Date:		December 2013
+Contact:	Aaro Koskinen <aaro.koskinen@iki.fi>
+Description:
+		Read the current VBUS state.
+
+		Reading: returns "on" or "off".
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-ts5500 b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-ts5500
new file mode 100644
index 0000000..e685957
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-ts5500
@@ -0,0 +1,54 @@
+What:		/sys/devices/platform/ts5500/adc
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of an A/D Converter. If it is present,
+		it will display "1", otherwise "0".
+
+What:		/sys/devices/platform/ts5500/ereset
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of an external reset. If it is present,
+		it will display "1", otherwise "0".
+
+What:		/sys/devices/platform/ts5500/id
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Product ID of the TS board. TS-5500 ID is 0x60.
+
+What:		/sys/devices/platform/ts5500/jumpers
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Bitfield showing the jumpers' state. If a jumper is present,
+		the corresponding bit is set. For instance, 0x0e means jumpers
+		2, 3 and 4 are set.
+
+What:		/sys/devices/platform/ts5500/name
+Date:		July 2014
+KernelVersion:	3.16
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Model name of the TS board, e.g. "TS-5500".
+
+What:		/sys/devices/platform/ts5500/rs485
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of the RS485 option. If it is present,
+		it will display "1", otherwise "0".
+
+What:		/sys/devices/platform/ts5500/sram
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of the SRAM option. If it is present,
+		it will display "1", otherwise "0".
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-twl4030-usb b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-twl4030-usb
new file mode 100644
index 0000000..512c51b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-twl4030-usb
@@ -0,0 +1,8 @@
+What: /sys/bus/platform/devices/*twl4030-usb/vbus
+Description:
+	Read-only status reporting if VBUS (approx 5V)
+	is being supplied by the USB bus.
+
+	Possible values: "on", "off".
+
+	Changes are notified via select/poll.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-usbip-vudc b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-usbip-vudc
new file mode 100644
index 0000000..81fcfb4
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-platform-usbip-vudc
@@ -0,0 +1,35 @@
+What:		/sys/devices/platform/usbip-vudc.%d/dev_desc
+Date:		April 2016
+KernelVersion:	4.6
+Contact:	Krzysztof Opasiak <k.opasiak@samsung.com>
+Description:
+		This file allows to read device descriptor of
+		gadget driver which is currently bound to this
+		controller. It is possible to read this file
+		only if gadget driver is bound, otherwise error
+		is returned.
+
+What:		/sys/devices/platform/usbip-vudc.%d/usbip_status
+Date:		April 2016
+KernelVersion:	4.6
+Contact:	Krzysztof Opasiak <k.opasiak@samsung.com>
+Description:
+		Current status of the device.
+		Allowed values:
+		1 - Device is available and can be exported
+		2 - Device is currently exported
+		3 - Fatal error occurred during communication
+		  with peer
+
+What:		/sys/devices/platform/usbip-vudc.%d/usbip_sockfd
+Date:		April 2016
+KernelVersion:	4.6
+Contact:	Krzysztof Opasiak <k.opasiak@samsung.com>
+Description:
+		This file allows to export usb device to
+		connection peer. It is done by writing to this
+		file socket fd (as a string for example "8")
+		associated with a connection to remote peer who
+		would like to use this device. It is possible to
+		close the connection by writing -1 instead of
+		socked fd.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-power b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-power
new file mode 100644
index 0000000..a1d1612
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-power
@@ -0,0 +1,287 @@
+What:		/sys/power/
+Date:		August 2006
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/power directory will contain files that will
+		provide a unified interface to the power management
+		subsystem.
+
+What:		/sys/power/state
+Date:		November 2016
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/power/state file controls system sleep states.
+		Reading from this file returns the available sleep state
+		labels, which may be "mem" (suspend), "standby" (power-on
+		suspend), "freeze" (suspend-to-idle) and "disk" (hibernation).
+
+		Writing one of the above strings to this file causes the system
+		to transition into the corresponding state, if available.
+
+		See Documentation/power/states.txt for more information.
+
+What:		/sys/power/mem_sleep
+Date:		November 2016
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/power/mem_sleep file controls the operating mode of
+		system suspend.  Reading from it returns the available modes
+		as "s2idle" (always present), "shallow" and "deep" (present if
+		supported).  The mode that will be used on subsequent attempts
+		to suspend the system (by writing "mem" to the /sys/power/state
+		file described above) is enclosed in square brackets.
+
+		Writing one of the above strings to this file causes the mode
+		represented by it to be used on subsequent attempts to suspend
+		the system.
+
+		See Documentation/power/states.txt for more information.
+
+What:		/sys/power/disk
+Date:		September 2006
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/power/disk file controls the operating mode of the
+		suspend-to-disk mechanism.  Reading from this file returns
+		the name of the method by which the system will be put to
+		sleep on the next suspend.  There are four methods supported:
+		'firmware' - means that the memory image will be saved to disk
+		by some firmware, in which case we also assume that the
+		firmware will handle the system suspend.
+		'platform' - the memory image will be saved by the kernel and
+		the system will be put to sleep by the platform driver (e.g.
+		ACPI or other PM registers).
+		'shutdown' - the memory image will be saved by the kernel and
+		the system will be powered off.
+		'reboot' - the memory image will be saved by the kernel and
+		the system will be rebooted.
+
+		Additionally, /sys/power/disk can be used to turn on one of the
+		two testing modes of the suspend-to-disk mechanism: 'testproc'
+		or 'test'.  If the suspend-to-disk mechanism is in the
+		'testproc' mode, writing 'disk' to /sys/power/state will cause
+		the kernel to disable nonboot CPUs and freeze tasks, wait for 5
+		seconds, unfreeze tasks and enable nonboot CPUs.  If it is in
+		the 'test' mode, writing 'disk' to /sys/power/state will cause
+		the kernel to disable nonboot CPUs and freeze tasks, shrink
+		memory, suspend devices, wait for 5 seconds, resume devices,
+		unfreeze tasks and enable nonboot CPUs.  Then, we are able to
+		look in the log messages and work out, for example, which code
+		is being slow and which device drivers are misbehaving.
+
+		The suspend-to-disk method may be chosen by writing to this
+		file one of the accepted strings:
+
+		'firmware'
+		'platform'
+		'shutdown'
+		'reboot'
+		'testproc'
+		'test'
+
+		It will only change to 'firmware' or 'platform' if the system
+		supports that.
+
+What:		/sys/power/image_size
+Date:		August 2006
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/power/image_size file controls the size of the image
+		created by the suspend-to-disk mechanism.  It can be written a
+		string representing a non-negative integer that will be used
+		as an upper limit of the image size, in bytes.  The kernel's
+		suspend-to-disk code will do its best to ensure the image size
+		will not exceed this number.  However, if it turns out to be
+		impossible, the kernel will try to suspend anyway using the
+		smallest image possible.  In particular, if "0" is written to
+		this file, the suspend image will be as small as possible.
+
+		Reading from this file will display the current image size
+		limit, which is set to 500 MB by default.
+
+What:		/sys/power/pm_trace
+Date:		August 2006
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/power/pm_trace file controls the code which saves the
+		last PM event point in the RTC across reboots, so that you can
+		debug a machine that just hangs during suspend (or more
+		commonly, during resume).  Namely, the RTC is only used to save
+		the last PM event point if this file contains '1'.  Initially
+		it contains '0' which may be changed to '1' by writing a
+		string representing a nonzero integer into it.
+
+		To use this debugging feature you should attempt to suspend
+		the machine, then reboot it and run
+
+		dmesg -s 1000000 | grep 'hash matches'
+
+		If you do not get any matches (or they appear to be false
+		positives), it is possible that the last PM event point
+		referred to a device created by a loadable kernel module.  In
+		this case cat /sys/power/pm_trace_dev_match (see below) after
+		your system is started up and the kernel modules are loaded.
+
+		CAUTION: Using it will cause your machine's real-time (CMOS)
+		clock to be set to a random invalid time after a resume.
+
+What;		/sys/power/pm_trace_dev_match
+Date:		October 2010
+Contact:	James Hogan <jhogan@kernel.org>
+Description:
+		The /sys/power/pm_trace_dev_match file contains the name of the
+		device associated with the last PM event point saved in the RTC
+		across reboots when pm_trace has been used.  More precisely it
+		contains the list of current devices (including those
+		registered by loadable kernel modules since boot) which match
+		the device hash in the RTC at boot, with a newline after each
+		one.
+
+		The advantage of this file over the hash matches printed to the
+		kernel log (see /sys/power/pm_trace), is that it includes
+		devices created after boot by loadable kernel modules.
+
+		Due to the small hash size necessary to fit in the RTC, it is
+		possible that more than one device matches the hash, in which
+		case further investigation is required to determine which
+		device is causing the problem.  Note that genuine RTC clock
+		values (such as when pm_trace has not been used), can still
+		match a device and output it's name here.
+
+What:		/sys/power/pm_async
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/power/pm_async file controls the switch allowing the
+		user space to enable or disable asynchronous suspend and resume
+		of devices.  If enabled, this feature will cause some device
+		drivers' suspend and resume callbacks to be executed in parallel
+		with each other and with the main suspend thread.  It is enabled
+		if this file contains "1", which is the default.  It may be
+		disabled by writing "0" to this file, in which case all devices
+		will be suspended and resumed synchronously.
+
+What:		/sys/power/wakeup_count
+Date:		July 2010
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/power/wakeup_count file allows user space to put the
+		system into a sleep state while taking into account the
+		concurrent arrival of wakeup events.  Reading from it returns
+		the current number of registered wakeup events and it blocks if
+		some wakeup events are being processed at the time the file is
+		read from.  Writing to it will only succeed if the current
+		number of wakeup events is equal to the written value and, if
+		successful, will make the kernel abort a subsequent transition
+		to a sleep state if any wakeup events are reported after the
+		write has returned.
+
+What:		/sys/power/reserved_size
+Date:		May 2011
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/power/reserved_size file allows user space to control
+		the amount of memory reserved for allocations made by device
+		drivers during the "device freeze" stage of hibernation.  It can
+		be written a string representing a non-negative integer that
+		will be used as the amount of memory to reserve for allocations
+		made by device drivers' "freeze" callbacks, in bytes.
+
+		Reading from this file will display the current value, which is
+		set to 1 MB by default.
+
+What:		/sys/power/autosleep
+Date:		April 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/power/autosleep file can be written one of the strings
+		returned by reads from /sys/power/state.  If that happens, a
+		work item attempting to trigger a transition of the system to
+		the sleep state represented by that string is queued up.  This
+		attempt will only succeed if there are no active wakeup sources
+		in the system at that time.  After every execution, regardless
+		of whether or not the attempt to put the system to sleep has
+		succeeded, the work item requeues itself until user space
+		writes "off" to /sys/power/autosleep.
+
+		Reading from this file causes the last string successfully
+		written to it to be returned.
+
+What:		/sys/power/wake_lock
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/power/wake_lock file allows user space to create
+		wakeup source objects and activate them on demand (if one of
+		those wakeup sources is active, reads from the
+		/sys/power/wakeup_count file block or return false).  When a
+		string without white space is written to /sys/power/wake_lock,
+		it will be assumed to represent a wakeup source name.  If there
+		is a wakeup source object with that name, it will be activated
+		(unless active already).  Otherwise, a new wakeup source object
+		will be registered, assigned the given name and activated.
+		If a string written to /sys/power/wake_lock contains white
+		space, the part of the string preceding the white space will be
+		regarded as a wakeup source name and handled as descrived above.
+		The other part of the string will be regarded as a timeout (in
+		nanoseconds) such that the wakeup source will be automatically
+		deactivated after it has expired.  The timeout, if present, is
+		set regardless of the current state of the wakeup source object
+		in question.
+
+		Reads from this file return a string consisting of the names of
+		wakeup sources created with the help of it that are active at
+		the moment, separated with spaces.
+
+
+What:		/sys/power/wake_unlock
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/power/wake_unlock file allows user space to deactivate
+		wakeup sources created with the help of /sys/power/wake_lock.
+		When a string is written to /sys/power/wake_unlock, it will be
+		assumed to represent the name of a wakeup source to deactivate.
+		If a wakeup source object of that name exists and is active at
+		the moment, it will be deactivated.
+
+		Reads from this file return a string consisting of the names of
+		wakeup sources created with the help of /sys/power/wake_lock
+		that are inactive at the moment, separated with spaces.
+
+What:		/sys/power/pm_print_times
+Date:		May 2012
+Contact:	Sameer Nanda <snanda@chromium.org>
+Description:
+		The /sys/power/pm_print_times file allows user space to
+		control whether the time taken by devices to suspend and
+		resume is printed.  These prints are useful for hunting down
+		devices that take too long to suspend or resume.
+
+		Writing a "1" enables this printing while writing a "0"
+		disables it.  The default value is "0".  Reading from this file
+		will display the current value.
+
+What:		/sys/power/pm_wakeup_irq
+Date:		April 2015
+Contact:	Alexandra Yates <alexandra.yates@linux.intel.org>
+Description:
+		The /sys/power/pm_wakeup_irq file reports to user space the IRQ
+		number of the first wakeup interrupt (that is, the first
+		interrupt from an IRQ line armed for system wakeup) seen by the
+		kernel during the most recent system suspend/resume cycle.
+
+		This output is useful for system wakeup diagnostics of spurious
+		wakeup interrupts.
+
+What:		/sys/power/pm_debug_messages
+Date:		July 2017
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/power/pm_debug_messages file controls the printing
+		of debug messages from the system suspend/hiberbation
+		infrastructure to the kernel log.
+
+		Writing a "1" to this file enables the debug messages and
+		writing a "0" (default) to it disables them.  Reads from
+		this file return the current value.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-pps b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-pps
new file mode 100644
index 0000000..25028c7
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-pps
@@ -0,0 +1,73 @@
+What:		/sys/class/pps/
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ directory will contain files and
+		directories that will provide a unified interface to
+		the PPS sources.
+
+What:		/sys/class/pps/ppsX/
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/ directory is related to X-th
+		PPS source into the system. Each directory will
+		contain files to manage and control its PPS source.
+
+What:		/sys/class/pps/ppsX/assert
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/assert file reports the assert events
+		and the assert sequence number of the X-th source in the form:
+
+			<secs>.<nsec>#<sequence>
+
+		If the source has no assert events the content of this file
+		is empty.
+
+What:		/sys/class/pps/ppsX/clear
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/clear file reports the clear events
+		and the clear sequence number of the X-th source in the form:
+
+			<secs>.<nsec>#<sequence>
+
+		If the source has no clear events the content of this file
+		is empty.
+
+What:		/sys/class/pps/ppsX/mode
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/mode file reports the functioning
+		mode of the X-th source in hexadecimal encoding.
+
+		Please, refer to linux/include/linux/pps.h for further
+		info.
+
+What:		/sys/class/pps/ppsX/echo
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/echo file reports if the X-th does
+		or does not support an "echo" function.
+
+What:		/sys/class/pps/ppsX/name
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/name file reports the name of the
+		X-th source.
+
+What:		/sys/class/pps/ppsX/path
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/path file reports the path name of
+		the device connected with the X-th source.
+
+		If the source is not connected with any device the content
+		of this file is empty.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-profiling b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-profiling
new file mode 100644
index 0000000..8a8e466
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-profiling
@@ -0,0 +1,13 @@
+What:		/sys/kernel/profiling
+Date:		September 2008
+Contact:	Dave Hansen <dave@linux.vnet.ibm.com>
+Description:
+		/sys/kernel/profiling is the runtime equivalent
+		of the boot-time profile= option.
+
+		You can get the same effect running:
+
+			echo 2 > /sys/kernel/profiling
+
+		as you would by issuing profile=2 on the boot
+		command line.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-ptp b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-ptp
new file mode 100644
index 0000000..a17f817
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-ptp
@@ -0,0 +1,122 @@
+What:		/sys/class/ptp/
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This directory contains files and directories
+		providing a standardized interface to the ancillary
+		features of PTP hardware clocks.
+
+What:		/sys/class/ptp/ptpN/
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This directory contains the attributes of the Nth PTP
+		hardware clock registered into the PTP class driver
+		subsystem.
+
+What:		/sys/class/ptp/ptpN/clock_name
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This file contains the name of the PTP hardware clock
+		as a human readable string. The purpose of this
+		attribute is to provide the user with a "friendly
+		name" and to help distinguish PHY based devices from
+		MAC based ones. The string does not necessarily have
+		to be any kind of unique id.
+
+What:		/sys/class/ptp/ptpN/max_adjustment
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This file contains the PTP hardware clock's maximum
+		frequency adjustment value (a positive integer) in
+		parts per billion.
+
+What:		/sys/class/ptp/ptpN/n_alarms
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This file contains the number of periodic or one shot
+		alarms offer by the PTP hardware clock.
+
+What:		/sys/class/ptp/ptpN/n_external_timestamps
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This file contains the number of external timestamp
+		channels offered by the PTP hardware clock.
+
+What:		/sys/class/ptp/ptpN/n_periodic_outputs
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This file contains the number of programmable periodic
+		output channels offered by the PTP hardware clock.
+
+What:		/sys/class/ptp/ptpN/n_pins
+Date:		March 2014
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This file contains the number of programmable pins
+		offered by the PTP hardware clock.
+
+What:		/sys/class/ptp/ptpN/pins
+Date:		March 2014
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This directory contains one file for each programmable
+		pin offered by the PTP hardware clock. The file name
+		is the hardware dependent pin name. Reading from this
+		file produces two numbers, the assigned function (see
+		the PTP_PF_ enumeration values in linux/ptp_clock.h)
+		and the channel number. The function and channel
+		assignment may be changed by two writing numbers into
+		the file.
+
+What:		/sys/class/ptp/ptpN/pps_available
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This file indicates whether the PTP hardware clock
+		supports a Pulse Per Second to the host CPU. Reading
+		"1" means that the PPS is supported, while "0" means
+		not supported.
+
+What:		/sys/class/ptp/ptpN/extts_enable
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This write-only file enables or disables external
+		timestamps. To enable external timestamps, write the
+		channel index followed by a "1" into the file.
+		To disable external timestamps, write the channel
+		index followed by a "0" into the file.
+
+What:		/sys/class/ptp/ptpN/fifo
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This file provides timestamps on external events, in
+		the form of three integers: channel index, seconds,
+		and nanoseconds.
+
+What:		/sys/class/ptp/ptpN/period
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This write-only file enables or disables periodic
+		outputs. To enable a periodic output, write five
+		integers into the file: channel index, start time
+		seconds, start time nanoseconds, period seconds, and
+		period nanoseconds. To disable a periodic output, set
+		all the seconds and nanoseconds values to zero.
+
+What:		/sys/class/ptp/ptpN/pps_enable
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This write-only file enables or disables delivery of
+		PPS events to the Linux PPS subsystem. To enable PPS
+		events, write a "1" into the file. To disable events,
+		write a "0" into the file.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-tty b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-tty
new file mode 100644
index 0000000..9eb3c2b
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-tty
@@ -0,0 +1,156 @@
+What:		/sys/class/tty/console/active
+Date:		Nov 2010
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:
+		 Shows the list of currently configured
+		 console devices, like 'tty1 ttyS0'.
+		 The last entry in the file is the active
+		 device connected to /dev/console.
+		 The file supports poll() to detect virtual
+		 console switches.
+
+What:		/sys/class/tty/tty0/active
+Date:		Nov 2010
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:
+		 Shows the currently active virtual console
+		 device, like 'tty1'.
+		 The file supports poll() to detect virtual
+		 console switches.
+
+What:		/sys/class/tty/ttyS0/uartclk
+Date:		Sep 2012
+Contact:	Tomas Hlavacek <tmshlvck@gmail.com>
+Description:
+		 Shows the current uartclk value associated with the
+		 UART port in serial_core, that is bound to TTY like ttyS0.
+		 uartclk = 16 * baud_base
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/type
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Shows the current tty type for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/line
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Shows the current tty line number for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/port
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Shows the current tty port I/O address for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/irq
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Shows the current primary interrupt for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/flags
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the tty port status flags for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/xmit_fifo_size
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the transmit FIFO size for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/close_delay
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the closing delay time for this port in ms.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/closing_wait
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the close wait time for this port in ms.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/custom_divisor
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the custom divisor if any that is set on this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/io_type
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the I/O type that is to be used with the iomem base
+		 address.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/iomem_base
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 The I/O memory base for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/iomem_reg_shift
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the register shift indicating the spacing to be used
+		 for accesses on this iomem address.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/rx_trig_bytes
+Date:		May 2014
+Contact:	Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
+Description:
+		 Shows current RX interrupt trigger bytes or sets the
+		 user specified value to change it for the FIFO buffer.
+		 Users can show or set this value regardless of opening the
+		 serial device file or not.
+
+		 The RX trigger can be set one of four kinds of values for UART
+		 serials. When users input a meaning less value to this I/F,
+		 the RX trigger is changed to the nearest lower value for the
+		 device specification. For example, when user sets 7bytes on
+		 16550A, which has 1/4/8/14 bytes trigger, the RX trigger is
+		 automatically changed to 4 bytes.
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-uevent b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-uevent
new file mode 100644
index 0000000..aa39f8d
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-uevent
@@ -0,0 +1,47 @@
+What:           /sys/.../uevent
+Date:           May 2017
+KernelVersion:  4.13
+Contact:        Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:
+                Enable passing additional variables for synthetic uevents that
+                are generated by writing /sys/.../uevent file.
+
+                Recognized extended format is ACTION [UUID [KEY=VALUE ...].
+
+                The ACTION is compulsory - it is the name of the uevent action
+                ("add", "change", "remove"). There is no change compared to
+                previous functionality here. The rest of the extended format
+                is optional.
+
+                You need to pass UUID first before any KEY=VALUE pairs.
+                The UUID must be in "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+                format where 'x' is a hex digit. The UUID is considered to be
+                a transaction identifier so it's possible to use the same UUID
+                value for one or more synthetic uevents in which case we
+                logically group these uevents together for any userspace
+                listeners. The UUID value appears in uevent as
+                "SYNTH_UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" environment
+                variable.
+
+                If UUID is not passed in, the generated synthetic uevent gains
+                "SYNTH_UUID=0" environment variable automatically.
+
+                The KEY=VALUE pairs can contain alphanumeric characters only.
+                It's possible to define zero or more pairs - each pair is then
+                delimited by a space character ' '. Each pair appears in
+                synthetic uevent as "SYNTH_ARG_KEY=VALUE". That means the KEY
+                name gains "SYNTH_ARG_" prefix to avoid possible collisions
+                with existing variables.
+
+                Example of valid sequence written to the uevent file:
+
+                    add fe4d7c9d-b8c6-4a70-9ef1-3d8a58d18eed A=1 B=abc
+
+                This generates synthetic uevent including these variables:
+
+                    ACTION=add
+                    SYNTH_ARG_A=1
+                    SYNTH_ARG_B=abc
+                    SYNTH_UUID=fe4d7c9d-b8c6-4a70-9ef1-3d8a58d18eed
+Users:
+                udev, userspace tools generating synthetic uevents
diff --git a/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-wusb_cbaf b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-wusb_cbaf
new file mode 100644
index 0000000..a99c5f8
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/ABI/testing/sysfs-wusb_cbaf
@@ -0,0 +1,100 @@
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_*
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                Various files for managing Cable Based Association of
+                (wireless) USB devices.
+
+                The sequence of operations should be:
+
+                1. Device is plugged in.
+
+                2. The connection manager (CM) sees a device with CBA capability.
+                   (the wusb_chid etc. files in /sys/devices/blah/OURDEVICE).
+
+                3. The CM writes the host name, supported band groups,
+                   and the CHID (host ID) into the wusb_host_name,
+                   wusb_host_band_groups and wusb_chid files. These
+                   get sent to the device and the CDID (if any) for
+                   this host is requested.
+
+                4. The CM can verify that the device's supported band
+                   groups (wusb_device_band_groups) are compatible
+                   with the host.
+
+                5. The CM reads the wusb_cdid file.
+
+                6. The CM looks it up its database.
+
+                   - If it has a matching CHID,CDID entry, the device
+                     has been authorized before and nothing further
+                     needs to be done.
+
+                   - If the CDID is zero (or the CM doesn't find a
+                     matching CDID in its database), the device is
+                     assumed to be not known.  The CM may associate
+                     the host with device by: writing a randomly
+                     generated CDID to wusb_cdid and then a random CK
+                     to wusb_ck (this uploads the new CC to the
+                     device).
+
+                     CMD may choose to prompt the user before
+                     associating with a new device.
+
+                7. Device is unplugged.
+
+                References:
+                  [WUSB-AM] Association Models Supplement to the
+                            Certified Wireless Universal Serial Bus
+                            Specification, version 1.0.
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_chid
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The CHID of the host formatted as 16 space-separated
+                hex octets.
+
+                Writes fetches device's supported band groups and the
+                the CDID for any existing association with this host.
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_host_name
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                A friendly name for the host as a UTF-8 encoded string.
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_host_band_groups
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The band groups supported by the host, in the format
+                defined in [WUSB-AM].
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_device_band_groups
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The band groups supported by the device, in the format
+                defined in [WUSB-AM].
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_cdid
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The device's CDID formatted as 16 space-separated hex
+                octets.
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_ck
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                Write 16 space-separated random, hex octets to
+                associate with the device.