[Feature]add MT2731_MP2_MR2_SVN388 baseline version

Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/Documentation/hwmon/abituguru3 b/src/kernel/linux/v4.14/Documentation/hwmon/abituguru3
new file mode 100644
index 0000000..a6ccfe4
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/hwmon/abituguru3
@@ -0,0 +1,65 @@
+Kernel driver abituguru3
+========================
+
+Supported chips:
+  * Abit uGuru revision 3 (Hardware Monitor part, reading only)
+    Prefix: 'abituguru3'
+    Addresses scanned: ISA 0x0E0
+    Datasheet: Not available, this driver is based on reverse engineering.
+    Note:
+	The uGuru is a microcontroller with onboard firmware which programs
+	it to behave as a hwmon IC. There are many different revisions of the
+	firmware and thus effectivly many different revisions of the uGuru.
+	Below is an incomplete list with which revisions are used for which
+	Motherboards:
+	uGuru 1.00    ~ 1.24    (AI7, KV8-MAX3, AN7)
+	uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
+	uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
+	uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
+	uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
+				 AW9D-MAX)
+	The abituguru3 driver is only for revison 3.0.x.x motherboards,
+	this driver will not work on older motherboards. For older
+	motherboards use the abituguru (without the 3 !) driver.
+
+Authors:
+	Hans de Goede <j.w.r.degoede@hhs.nl>,
+	(Initial reverse engineering done by Louis Kruger)
+
+
+Module Parameters
+-----------------
+
+* force: bool		Force detection. Note this parameter only causes the
+			detection to be skipped, and thus the insmod to
+			succeed. If the uGuru can't be read the actual hwmon
+			driver will not load and thus no hwmon device will get
+			registered.
+* verbose: bool		Should the driver be verbose?
+			0/off/false  normal output
+			1/on/true    + verbose error reporting (default)
+			Default: 1 (the driver is still in the testing phase)
+
+Description
+-----------
+
+This driver supports the hardware monitoring features of the third revision of
+the Abit uGuru chip, found on recent Abit uGuru featuring motherboards.
+
+The 3rd revision of the uGuru chip in reality is a Winbond W83L951G.
+Unfortunately this doesn't help since the W83L951G is a generic microcontroller
+with a custom Abit application running on it.
+
+Despite Abit not releasing any information regarding the uGuru revision 3,
+Louis Kruger has managed to reverse engineer the sensor part of the uGuru.
+Without his work this driver would not have been possible.
+
+Known Issues
+------------
+
+The voltage and frequency control parts of the Abit uGuru are not supported,
+neither is writing any of the sensor settings and writing / reading the
+fanspeed control registers (FanEQ)
+
+If you encounter any problems please mail me <j.w.r.degoede@hhs.nl> and
+include the output of: "dmesg | grep abituguru"