[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/Documentation/i2c/ten-bit-addresses b/src/kernel/linux/v4.14/Documentation/i2c/ten-bit-addresses
new file mode 100644
index 0000000..7b2d11e
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/i2c/ten-bit-addresses
@@ -0,0 +1,28 @@
+The I2C protocol knows about two kinds of device addresses: normal 7 bit
+addresses, and an extended set of 10 bit addresses. The sets of addresses
+do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
+address 0x10 (though a single device could respond to both of them).
+To avoid ambiguity, the user sees 10 bit addresses mapped to a different
+address space, namely 0xa000-0xa3ff. The leading 0xa (= 10) represents the
+10 bit mode. This is used for creating device names in sysfs. It is also
+needed when instantiating 10 bit devices via the new_device file in sysfs.
+
+I2C messages to and from 10-bit address devices have a different format.
+See the I2C specification for the details.
+
+The current 10 bit address support is minimal. It should work, however
+you can expect some problems along the way:
+* Not all bus drivers support 10-bit addresses. Some don't because the
+ hardware doesn't support them (SMBus doesn't require 10-bit address
+ support for example), some don't because nobody bothered adding the
+ code (or it's there but not working properly.) Software implementation
+ (i2c-algo-bit) is known to work.
+* Some optional features do not support 10-bit addresses. This is the
+ case of automatic detection and instantiation of devices by their,
+ drivers, for example.
+* Many user-space packages (for example i2c-tools) lack support for
+ 10-bit addresses.
+
+Note that 10-bit address devices are still pretty rare, so the limitations
+listed above could stay for a long time, maybe even forever if nobody
+needs them to be fixed.