[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/Documentation/io_ordering.txt b/src/kernel/linux/v4.14/Documentation/io_ordering.txt
new file mode 100644
index 0000000..2ab303c
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/io_ordering.txt
@@ -0,0 +1,51 @@
+==============================================
+Ordering I/O writes to memory-mapped addresses
+==============================================
+
+On some platforms, so-called memory-mapped I/O is weakly ordered. On such
+platforms, driver writers are responsible for ensuring that I/O writes to
+memory-mapped addresses on their device arrive in the order intended. This is
+typically done by reading a 'safe' device or bridge register, causing the I/O
+chipset to flush pending writes to the device before any reads are posted. A
+driver would usually use this technique immediately prior to the exit of a
+critical section of code protected by spinlocks. This would ensure that
+subsequent writes to I/O space arrived only after all prior writes (much like a
+memory barrier op, mb(), only with respect to I/O).
+
+A more concrete example from a hypothetical device driver::
+
+ ...
+ CPU A: spin_lock_irqsave(&dev_lock, flags)
+ CPU A: val = readl(my_status);
+ CPU A: ...
+ CPU A: writel(newval, ring_ptr);
+ CPU A: spin_unlock_irqrestore(&dev_lock, flags)
+ ...
+ CPU B: spin_lock_irqsave(&dev_lock, flags)
+ CPU B: val = readl(my_status);
+ CPU B: ...
+ CPU B: writel(newval2, ring_ptr);
+ CPU B: spin_unlock_irqrestore(&dev_lock, flags)
+ ...
+
+In the case above, the device may receive newval2 before it receives newval,
+which could cause problems. Fixing it is easy enough though::
+
+ ...
+ CPU A: spin_lock_irqsave(&dev_lock, flags)
+ CPU A: val = readl(my_status);
+ CPU A: ...
+ CPU A: writel(newval, ring_ptr);
+ CPU A: (void)readl(safe_register); /* maybe a config register? */
+ CPU A: spin_unlock_irqrestore(&dev_lock, flags)
+ ...
+ CPU B: spin_lock_irqsave(&dev_lock, flags)
+ CPU B: val = readl(my_status);
+ CPU B: ...
+ CPU B: writel(newval2, ring_ptr);
+ CPU B: (void)readl(safe_register); /* maybe a config register? */
+ CPU B: spin_unlock_irqrestore(&dev_lock, flags)
+
+Here, the reads from safe_register will cause the I/O chipset to flush any
+pending writes before actually posting the read to the chipset, preventing
+possible data corruption.