[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/Documentation/media/v4l-drivers/cx18.rst b/src/kernel/linux/v4.14/Documentation/media/v4l-drivers/cx18.rst
new file mode 100644
index 0000000..afa03f6
--- /dev/null
+++ b/src/kernel/linux/v4.14/Documentation/media/v4l-drivers/cx18.rst
@@ -0,0 +1,37 @@
+The cx18 driver
+===============
+
+.. note::
+
+ This documentation is outdated.
+
+Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
+encoder chip:
+
+1) Currently supported are:
+
+ - Hauppauge HVR-1600
+ - Compro VideoMate H900
+ - Yuan MPC718
+ - Conexant Raptor PAL/SECAM devkit
+
+2) Some people have problems getting the i2c bus to work.
+ The symptom is that the eeprom cannot be read and the card is
+ unusable. This is probably fixed, but if you have problems
+ then post to the video4linux or ivtv-users mailing list.
+
+3) VBI (raw or sliced) has not yet been implemented.
+
+4) MPEG indexing is not yet implemented.
+
+5) The driver is still a bit rough around the edges, this should
+ improve over time.
+
+
+Firmware:
+
+You can obtain the firmware files here:
+
+http://dl.ivtvdriver.org/ivtv/firmware/cx18-firmware.tar.gz
+
+Untar and copy the .fw files to your firmware directory.