[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/arch/arc/Kconfig b/src/kernel/linux/v4.14/arch/arc/Kconfig
new file mode 100644
index 0000000..8205089
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arc/Kconfig
@@ -0,0 +1,608 @@
+#
+# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+
+config ARC
+ def_bool y
+ select ARC_TIMERS
+ select ARCH_HAS_SG_CHAIN
+ select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC
+ select BUILDTIME_EXTABLE_SORT
+ select CLONE_BACKWARDS
+ select COMMON_CLK
+ select GENERIC_ATOMIC64 if !ISA_ARCV2 || !(ARC_HAS_LL64 && ARC_HAS_LLSC)
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_FIND_FIRST_BIT
+ # for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
+ select GENERIC_IRQ_SHOW
+ select GENERIC_PCI_IOMAP
+ select GENERIC_PENDING_IRQ if SMP
+ select GENERIC_SMP_IDLE_THREAD
+ select HAVE_ARCH_KGDB
+ select HAVE_ARCH_TRACEHOOK
+ select HAVE_FUTEX_CMPXCHG if FUTEX
+ select HAVE_IOREMAP_PROT
+ select HAVE_KPROBES
+ select HAVE_KRETPROBES
+ select HAVE_MEMBLOCK
+ select HAVE_MOD_ARCH_SPECIFIC
+ select HAVE_OPROFILE
+ select HAVE_PERF_EVENTS
+ select HANDLE_DOMAIN_IRQ
+ select IRQ_DOMAIN
+ select MODULES_USE_ELF_RELA
+ select NO_BOOTMEM
+ select OF
+ select OF_EARLY_FLATTREE
+ select OF_RESERVED_MEM
+ select PERF_USE_VMALLOC
+ select HAVE_DEBUG_STACKOVERFLOW
+ select HAVE_GENERIC_DMA_COHERENT
+ select HAVE_KERNEL_GZIP
+ select HAVE_KERNEL_LZMA
+
+config ARCH_HAS_CACHE_LINE_SIZE
+ def_bool y
+
+config MIGHT_HAVE_PCI
+ bool
+
+config TRACE_IRQFLAGS_SUPPORT
+ def_bool y
+
+config LOCKDEP_SUPPORT
+ def_bool y
+
+config SCHED_OMIT_FRAME_POINTER
+ def_bool y
+
+config GENERIC_CSUM
+ def_bool y
+
+config RWSEM_GENERIC_SPINLOCK
+ def_bool y
+
+config ARCH_DISCONTIGMEM_ENABLE
+ def_bool n
+
+config ARCH_FLATMEM_ENABLE
+ def_bool y
+
+config MMU
+ def_bool y
+
+config NO_IOPORT_MAP
+ def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+ def_bool y
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config STACKTRACE_SUPPORT
+ def_bool y
+ select STACKTRACE
+
+config HAVE_ARCH_TRANSPARENT_HUGEPAGE
+ def_bool y
+ depends on ARC_MMU_V4
+
+source "init/Kconfig"
+source "kernel/Kconfig.freezer"
+
+menu "ARC Architecture Configuration"
+
+menu "ARC Platform/SoC/Board"
+
+source "arch/arc/plat-tb10x/Kconfig"
+source "arch/arc/plat-axs10x/Kconfig"
+#New platform adds here
+source "arch/arc/plat-eznps/Kconfig"
+source "arch/arc/plat-hsdk/Kconfig"
+
+endmenu
+
+choice
+ prompt "ARC Instruction Set"
+ default ISA_ARCV2
+
+config ISA_ARCOMPACT
+ bool "ARCompact ISA"
+ select CPU_NO_EFFICIENT_FFS
+ help
+ The original ARC ISA of ARC600/700 cores
+
+config ISA_ARCV2
+ bool "ARC ISA v2"
+ select ARC_TIMERS_64BIT
+ help
+ ISA for the Next Generation ARC-HS cores
+
+endchoice
+
+menu "ARC CPU Configuration"
+
+choice
+ prompt "ARC Core"
+ default ARC_CPU_770 if ISA_ARCOMPACT
+ default ARC_CPU_HS if ISA_ARCV2
+
+if ISA_ARCOMPACT
+
+config ARC_CPU_750D
+ bool "ARC750D"
+ select ARC_CANT_LLSC
+ help
+ Support for ARC750 core
+
+config ARC_CPU_770
+ bool "ARC770"
+ select ARC_HAS_SWAPE
+ help
+ Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
+ This core has a bunch of cool new features:
+ -MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4)
+ Shared Address Spaces (for sharing TLB entires in MMU)
+ -Caches: New Prog Model, Region Flush
+ -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
+
+endif #ISA_ARCOMPACT
+
+config ARC_CPU_HS
+ bool "ARC-HS"
+ depends on ISA_ARCV2
+ help
+ Support for ARC HS38x Cores based on ARCv2 ISA
+ The notable features are:
+ - SMP configurations of upto 4 core with coherency
+ - Optional L2 Cache and IO-Coherency
+ - Revised Interrupt Architecture (multiple priorites, reg banks,
+ auto stack switch, auto regfile save/restore)
+ - MMUv4 (PIPT dcache, Huge Pages)
+ - Instructions for
+ * 64bit load/store: LDD, STD
+ * Hardware assisted divide/remainder: DIV, REM
+ * Function prologue/epilogue: ENTER_S, LEAVE_S
+ * IRQ enable/disable: CLRI, SETI
+ * pop count: FFS, FLS
+ * SETcc, BMSKN, XBFU...
+
+endchoice
+
+config CPU_BIG_ENDIAN
+ bool "Enable Big Endian Mode"
+ default n
+ help
+ Build kernel for Big Endian Mode of ARC CPU
+
+config SMP
+ bool "Symmetric Multi-Processing"
+ default n
+ select ARC_MCIP if ISA_ARCV2
+ help
+ This enables support for systems with more than one CPU.
+
+if SMP
+
+config NR_CPUS
+ int "Maximum number of CPUs (2-4096)"
+ range 2 4096
+ default "4"
+
+config ARC_SMP_HALT_ON_RESET
+ bool "Enable Halt-on-reset boot mode"
+ default y if ARC_UBOOT_SUPPORT
+ help
+ In SMP configuration cores can be configured as Halt-on-reset
+ or they could all start at same time. For Halt-on-reset, non
+ masters are parked until Master kicks them so they can start of
+ at designated entry point. For other case, all jump to common
+ entry point and spin wait for Master's signal.
+
+endif #SMP
+
+config ARC_MCIP
+ bool "ARConnect Multicore IP (MCIP) Support "
+ depends on ISA_ARCV2
+ default y if SMP
+ help
+ This IP block enables SMP in ARC-HS38 cores.
+ It provides for cross-core interrupts, multi-core debug
+ hardware semaphores, shared memory,....
+
+menuconfig ARC_CACHE
+ bool "Enable Cache Support"
+ default y
+
+if ARC_CACHE
+
+config ARC_CACHE_LINE_SHIFT
+ int "Cache Line Length (as power of 2)"
+ range 5 7
+ default "6"
+ help
+ Starting with ARC700 4.9, Cache line length is configurable,
+ This option specifies "N", with Line-len = 2 power N
+ So line lengths of 32, 64, 128 are specified by 5,6,7, respectively
+ Linux only supports same line lengths for I and D caches.
+
+config ARC_HAS_ICACHE
+ bool "Use Instruction Cache"
+ default y
+
+config ARC_HAS_DCACHE
+ bool "Use Data Cache"
+ default y
+
+config ARC_CACHE_PAGES
+ bool "Per Page Cache Control"
+ default y
+ depends on ARC_HAS_ICACHE || ARC_HAS_DCACHE
+ help
+ This can be used to over-ride the global I/D Cache Enable on a
+ per-page basis (but only for pages accessed via MMU such as
+ Kernel Virtual address or User Virtual Address)
+ TLB entries have a per-page Cache Enable Bit.
+ Note that Global I/D ENABLE + Per Page DISABLE works but corollary
+ Global DISABLE + Per Page ENABLE won't work
+
+config ARC_CACHE_VIPT_ALIASING
+ bool "Support VIPT Aliasing D$"
+ depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
+ default n
+
+endif #ARC_CACHE
+
+config ARC_HAS_ICCM
+ bool "Use ICCM"
+ help
+ Single Cycle RAMS to store Fast Path Code
+ default n
+
+config ARC_ICCM_SZ
+ int "ICCM Size in KB"
+ default "64"
+ depends on ARC_HAS_ICCM
+
+config ARC_HAS_DCCM
+ bool "Use DCCM"
+ help
+ Single Cycle RAMS to store Fast Path Data
+ default n
+
+config ARC_DCCM_SZ
+ int "DCCM Size in KB"
+ default "64"
+ depends on ARC_HAS_DCCM
+
+config ARC_DCCM_BASE
+ hex "DCCM map address"
+ default "0xA0000000"
+ depends on ARC_HAS_DCCM
+
+choice
+ prompt "MMU Version"
+ default ARC_MMU_V3 if ARC_CPU_770
+ default ARC_MMU_V2 if ARC_CPU_750D
+ default ARC_MMU_V4 if ARC_CPU_HS
+
+if ISA_ARCOMPACT
+
+config ARC_MMU_V1
+ bool "MMU v1"
+ help
+ Orig ARC700 MMU
+
+config ARC_MMU_V2
+ bool "MMU v2"
+ help
+ Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio
+ when 2 D-TLB and 1 I-TLB entries index into same 2way set.
+
+config ARC_MMU_V3
+ bool "MMU v3"
+ depends on ARC_CPU_770
+ help
+ Introduced with ARC700 4.10: New Features
+ Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
+ Shared Address Spaces (SASID)
+
+endif
+
+config ARC_MMU_V4
+ bool "MMU v4"
+ depends on ISA_ARCV2
+
+endchoice
+
+
+choice
+ prompt "MMU Page Size"
+ default ARC_PAGE_SIZE_8K
+
+config ARC_PAGE_SIZE_8K
+ bool "8KB"
+ help
+ Choose between 8k vs 16k
+
+config ARC_PAGE_SIZE_16K
+ bool "16KB"
+ depends on ARC_MMU_V3 || ARC_MMU_V4
+
+config ARC_PAGE_SIZE_4K
+ bool "4KB"
+ depends on ARC_MMU_V3 || ARC_MMU_V4
+
+endchoice
+
+choice
+ prompt "MMU Super Page Size"
+ depends on ISA_ARCV2 && TRANSPARENT_HUGEPAGE
+ default ARC_HUGEPAGE_2M
+
+config ARC_HUGEPAGE_2M
+ bool "2MB"
+
+config ARC_HUGEPAGE_16M
+ bool "16MB"
+
+endchoice
+
+config NODES_SHIFT
+ int "Maximum NUMA Nodes (as a power of 2)"
+ default "0" if !DISCONTIGMEM
+ default "1" if DISCONTIGMEM
+ depends on NEED_MULTIPLE_NODES
+ ---help---
+ Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory
+ zones.
+
+if ISA_ARCOMPACT
+
+config ARC_COMPACT_IRQ_LEVELS
+ bool "Setup Timer IRQ as high Priority"
+ default n
+ # if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
+ depends on !SMP
+
+config ARC_FPU_SAVE_RESTORE
+ bool "Enable FPU state persistence across context switch"
+ default n
+ help
+ Double Precision Floating Point unit had dedictaed regs which
+ need to be saved/restored across context-switch.
+ Note that ARC FPU is overly simplistic, unlike say x86, which has
+ hardware pieces to allow software to conditionally save/restore,
+ based on actual usage of FPU by a task. Thus our implemn does
+ this for all tasks in system.
+
+endif #ISA_ARCOMPACT
+
+config ARC_CANT_LLSC
+ def_bool n
+
+config ARC_HAS_LLSC
+ bool "Insn: LLOCK/SCOND (efficient atomic ops)"
+ default y
+ depends on !ARC_CANT_LLSC
+
+config ARC_HAS_SWAPE
+ bool "Insn: SWAPE (endian-swap)"
+ default y
+
+if ISA_ARCV2
+
+config ARC_HAS_LL64
+ bool "Insn: 64bit LDD/STD"
+ help
+ Enable gcc to generate 64-bit load/store instructions
+ ISA mandates even/odd registers to allow encoding of two
+ dest operands with 2 possible source operands.
+ default y
+
+config ARC_HAS_DIV_REM
+ bool "Insn: div, divu, rem, remu"
+ default y
+
+config ARC_HAS_ACCL_REGS
+ bool "Reg Pair ACCL:ACCH (FPU and/or MPY > 6)"
+ default y
+ help
+ Depending on the configuration, CPU can contain accumulator reg-pair
+ (also referred to as r58:r59). These can also be used by gcc as GPR so
+ kernel needs to save/restore per process
+
+config ARC_IRQ_NO_AUTOSAVE
+ bool "Disable hardware autosave regfile on interrupts"
+ default n
+ help
+ On HS cores, taken interrupt auto saves the regfile on stack.
+ This is programmable and can be optionally disabled in which case
+ software INTERRUPT_PROLOGUE/EPILGUE do the needed work
+
+endif # ISA_ARCV2
+
+endmenu # "ARC CPU Configuration"
+
+config LINUX_LINK_BASE
+ hex "Kernel link address"
+ default "0x80000000"
+ help
+ ARC700 divides the 32 bit phy address space into two equal halves
+ -Lower 2G (0 - 0x7FFF_FFFF ) is user virtual, translated by MMU
+ -Upper 2G (0x8000_0000 onwards) is untranslated, for kernel
+ Typically Linux kernel is linked at the start of untransalted addr,
+ hence the default value of 0x8zs.
+ However some customers have peripherals mapped at this addr, so
+ Linux needs to be scooted a bit.
+ If you don't know what the above means, leave this setting alone.
+ This needs to match memory start address specified in Device Tree
+
+config LINUX_RAM_BASE
+ hex "RAM base address"
+ default LINUX_LINK_BASE
+ help
+ By default Linux is linked at base of RAM. However in some special
+ cases (such as HSDK), Linux can't be linked at start of DDR, hence
+ this option.
+
+config HIGHMEM
+ bool "High Memory Support"
+ select ARCH_DISCONTIGMEM_ENABLE
+ help
+ With ARC 2G:2G address split, only upper 2G is directly addressable by
+ kernel. Enable this to potentially allow access to rest of 2G and PAE
+ in future
+
+config ARC_HAS_PAE40
+ bool "Support for the 40-bit Physical Address Extension"
+ default n
+ depends on ISA_ARCV2
+ select HIGHMEM
+ help
+ Enable access to physical memory beyond 4G, only supported on
+ ARC cores with 40 bit Physical Addressing support
+
+config ARCH_PHYS_ADDR_T_64BIT
+ def_bool ARC_HAS_PAE40
+
+config ARCH_DMA_ADDR_T_64BIT
+ bool
+
+config ARC_PLAT_NEEDS_PHYS_TO_DMA
+ bool
+
+config ARC_KVADDR_SIZE
+ int "Kernel Virtaul Address Space size (MB)"
+ range 0 512
+ default "256"
+ help
+ The kernel address space is carved out of 256MB of translated address
+ space for catering to vmalloc, modules, pkmap, fixmap. This however may
+ not suffice vmalloc requirements of a 4K CPU EZChip system. So allow
+ this to be stretched to 512 MB (by extending into the reserved
+ kernel-user gutter)
+
+config ARC_CURR_IN_REG
+ bool "Dedicate Register r25 for current_task pointer"
+ default y
+ help
+ This reserved Register R25 to point to Current Task in
+ kernel mode. This saves memory access for each such access
+
+
+config ARC_EMUL_UNALIGNED
+ bool "Emulate unaligned memory access (userspace only)"
+ select SYSCTL_ARCH_UNALIGN_NO_WARN
+ select SYSCTL_ARCH_UNALIGN_ALLOW
+ depends on ISA_ARCOMPACT
+ help
+ This enables misaligned 16 & 32 bit memory access from user space.
+ Use ONLY-IF-ABS-NECESSARY as it will be very slow and also can hide
+ potential bugs in code
+
+config HZ
+ int "Timer Frequency"
+ default 100
+
+config ARC_METAWARE_HLINK
+ bool "Support for Metaware debugger assisted Host access"
+ default n
+ help
+ This options allows a Linux userland apps to directly access
+ host file system (open/creat/read/write etc) with help from
+ Metaware Debugger. This can come in handy for Linux-host communication
+ when there is no real usable peripheral such as EMAC.
+
+menuconfig ARC_DBG
+ bool "ARC debugging"
+ default y
+
+if ARC_DBG
+
+config ARC_DW2_UNWIND
+ bool "Enable DWARF specific kernel stack unwind"
+ default y
+ select KALLSYMS
+ help
+ Compiles the kernel with DWARF unwind information and can be used
+ to get stack backtraces.
+
+ If you say Y here the resulting kernel image will be slightly larger
+ but not slower, and it will give very useful debugging information.
+ If you don't debug the kernel, you can say N, but we may not be able
+ to solve problems without frame unwind information
+
+config ARC_DBG_TLB_PARANOIA
+ bool "Paranoia Checks in Low Level TLB Handlers"
+ default n
+
+endif
+
+config ARC_UBOOT_SUPPORT
+ bool "Support uboot arg Handling"
+ default n
+ help
+ ARC Linux by default checks for uboot provided args as pointers to
+ external cmdline or DTB. This however breaks in absence of uboot,
+ when booting from Metaware debugger directly, as the registers are
+ not zeroed out on reset by mdb and/or ARCv2 based cores. The bogus
+ registers look like uboot args to kernel which then chokes.
+ So only enable the uboot arg checking/processing if users are sure
+ of uboot being in play.
+
+config ARC_BUILTIN_DTB_NAME
+ string "Built in DTB"
+ help
+ Set the name of the DTB to embed in the vmlinux binary
+ Leaving it blank selects the minimal "skeleton" dtb
+
+source "kernel/Kconfig.preempt"
+
+menu "Executable file formats"
+source "fs/Kconfig.binfmt"
+endmenu
+
+endmenu # "ARC Architecture Configuration"
+
+source "mm/Kconfig"
+
+config FORCE_MAX_ZONEORDER
+ int "Maximum zone order"
+ default "12" if ARC_HUGEPAGE_16M
+ default "11"
+
+source "net/Kconfig"
+source "drivers/Kconfig"
+
+menu "Bus Support"
+
+config PCI
+ bool "PCI support" if MIGHT_HAVE_PCI
+ help
+ PCI is the name of a bus system, i.e., the way the CPU talks to
+ the other stuff inside your box. Find out if your board/platform
+ has PCI.
+
+ Note: PCIe support for Synopsys Device will be available only
+ when HAPS DX is configured with PCIe RC bitmap. If you have PCI,
+ say Y, otherwise N.
+
+config PCI_SYSCALL
+ def_bool PCI
+
+source "drivers/pci/Kconfig"
+
+endmenu
+
+source "fs/Kconfig"
+source "arch/arc/Kconfig.debug"
+source "security/Kconfig"
+source "crypto/Kconfig"
+source "lib/Kconfig"
+source "kernel/power/Kconfig"