[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-davinci/board-dm644x-evm.c b/src/kernel/linux/v4.14/arch/arm/mach-davinci/board-dm644x-evm.c
new file mode 100644
index 0000000..b07c9b1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -0,0 +1,825 @@
+/*
+ * TI DaVinci EVM board support
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/pcf857x.h>
+#include <linux/platform_data/at24.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/phy.h>
+#include <linux/clk.h>
+#include <linux/videodev2.h>
+#include <linux/v4l2-dv-timings.h>
+#include <linux/export.h>
+#include <linux/leds.h>
+
+#include <media/i2c/tvp514x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <mach/serial.h>
+#include <mach/mux.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+
+#include "davinci.h"
+
+#define DM644X_EVM_PHY_ID "davinci_mdio-0:01"
+#define LXT971_PHY_ID (0x001378e2)
+#define LXT971_PHY_MASK (0xfffffff0)
+
+static struct mtd_partition davinci_evm_norflash_partitions[] = {
+ /* bootloader (UBL, U-Boot, etc) in first 5 sectors */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = 5 * SZ_64K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next 1 sectors */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_64K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct physmap_flash_data davinci_evm_norflash_data = {
+ .width = 2,
+ .parts = davinci_evm_norflash_partitions,
+ .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions),
+};
+
+/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
+ * limits addresses to 16M, so using addresses past 16M will wrap */
+static struct resource davinci_evm_norflash_resource = {
+ .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device davinci_evm_norflash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &davinci_evm_norflash_data,
+ },
+ .num_resources = 1,
+ .resource = &davinci_evm_norflash_resource,
+};
+
+/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks).
+ * It may used instead of the (default) NOR chip to boot, using TI's
+ * tools to install the secondary boot loader (UBL) and U-Boot.
+ */
+static struct mtd_partition davinci_evm_nandflash_partition[] = {
+ /* Bootloader layout depends on whose u-boot is installed, but we
+ * can hide all the details.
+ * - block 0 for u-boot environment ... in mainline u-boot
+ * - block 1 for UBL (plus up to four backup copies in blocks 2..5)
+ * - blocks 6...? for u-boot
+ * - blocks 16..23 for u-boot environment ... in TI's u-boot
+ */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_256K + SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* Kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ },
+ /* File system (older GIT kernels started this on the 5MB mark) */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+ /* A few blocks at end hold a flash BBT ... created by TI's CCS
+ * using flashwriter_nand.out, but ignored by TI's versions of
+ * Linux and u-boot. We boot faster by using them.
+ */
+};
+
+static struct davinci_aemif_timing davinci_evm_nandflash_timing = {
+ .wsetup = 20,
+ .wstrobe = 40,
+ .whold = 20,
+ .rsetup = 10,
+ .rstrobe = 40,
+ .rhold = 10,
+ .ta = 40,
+};
+
+static struct davinci_nand_pdata davinci_evm_nandflash_data = {
+ .parts = davinci_evm_nandflash_partition,
+ .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
+ .ecc_mode = NAND_ECC_HW,
+ .ecc_bits = 1,
+ .bbt_options = NAND_BBT_USE_FLASH,
+ .timing = &davinci_evm_nandflash_timing,
+};
+
+static struct resource davinci_evm_nandflash_resource[] = {
+ {
+ .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DM644X_ASYNC_EMIF_CONTROL_BASE,
+ .end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_evm_nandflash_device = {
+ .name = "davinci_nand",
+ .id = 0,
+ .dev = {
+ .platform_data = &davinci_evm_nandflash_data,
+ },
+ .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource),
+ .resource = davinci_evm_nandflash_resource,
+};
+
+static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device davinci_fb_device = {
+ .name = "davincifb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &davinci_fb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = 0,
+};
+
+static struct tvp514x_platform_data dm644xevm_tvp5146_pdata = {
+ .clk_polarity = 0,
+ .hs_polarity = 1,
+ .vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input dm644xevm_tvp5146_inputs[] = {
+ {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = TVP514X_STD_ALL,
+ },
+ {
+ .index = 1,
+ .name = "S-Video",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = TVP514X_STD_ALL,
+ },
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route dm644xevm_tvp5146_routes[] = {
+ {
+ .input = INPUT_CVBS_VI2B,
+ .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+ },
+ {
+ .input = INPUT_SVIDEO_VI2C_VI1C,
+ .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+ },
+};
+
+static struct vpfe_subdev_info dm644xevm_vpfe_sub_devs[] = {
+ {
+ .name = "tvp5146",
+ .grp_id = 0,
+ .num_inputs = ARRAY_SIZE(dm644xevm_tvp5146_inputs),
+ .inputs = dm644xevm_tvp5146_inputs,
+ .routes = dm644xevm_tvp5146_routes,
+ .can_route = 1,
+ .ccdc_if_params = {
+ .if_type = VPFE_BT656,
+ .hdpol = VPFE_PINPOL_POSITIVE,
+ .vdpol = VPFE_PINPOL_POSITIVE,
+ },
+ .board_info = {
+ I2C_BOARD_INFO("tvp5146", 0x5d),
+ .platform_data = &dm644xevm_tvp5146_pdata,
+ },
+ },
+};
+
+static struct vpfe_config dm644xevm_capture_cfg = {
+ .num_subdevs = ARRAY_SIZE(dm644xevm_vpfe_sub_devs),
+ .i2c_adapter_id = 1,
+ .sub_devs = dm644xevm_vpfe_sub_devs,
+ .card_name = "DM6446 EVM",
+ .ccdc = "DM6446 CCDC",
+};
+
+static struct platform_device rtc_dev = {
+ .name = "rtc_davinci_evm",
+ .id = -1,
+};
+
+/*----------------------------------------------------------------------*/
+#ifdef CONFIG_I2C
+/*
+ * I2C GPIO expanders
+ */
+
+#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8))
+
+
+/* U2 -- LEDs */
+
+static struct gpio_led evm_leds[] = {
+ { .name = "DS8", .active_low = 1,
+ .default_trigger = "heartbeat", },
+ { .name = "DS7", .active_low = 1, },
+ { .name = "DS6", .active_low = 1, },
+ { .name = "DS5", .active_low = 1, },
+ { .name = "DS4", .active_low = 1, },
+ { .name = "DS3", .active_low = 1, },
+ { .name = "DS2", .active_low = 1,
+ .default_trigger = "mmc0", },
+ { .name = "DS1", .active_low = 1,
+ .default_trigger = "disk-activity", },
+};
+
+static const struct gpio_led_platform_data evm_led_data = {
+ .num_leds = ARRAY_SIZE(evm_leds),
+ .leds = evm_leds,
+};
+
+static struct platform_device *evm_led_dev;
+
+static int
+evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ struct gpio_led *leds = evm_leds;
+ int status;
+
+ while (ngpio--) {
+ leds->gpio = gpio++;
+ leds++;
+ }
+
+ /* what an extremely annoying way to be forced to handle
+ * device unregistration ...
+ */
+ evm_led_dev = platform_device_alloc("leds-gpio", 0);
+ platform_device_add_data(evm_led_dev,
+ &evm_led_data, sizeof evm_led_data);
+
+ evm_led_dev->dev.parent = &client->dev;
+ status = platform_device_add(evm_led_dev);
+ if (status < 0) {
+ platform_device_put(evm_led_dev);
+ evm_led_dev = NULL;
+ }
+ return status;
+}
+
+static int
+evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ if (evm_led_dev) {
+ platform_device_unregister(evm_led_dev);
+ evm_led_dev = NULL;
+ }
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u2 = {
+ .gpio_base = PCF_Uxx_BASE(0),
+ .setup = evm_led_setup,
+ .teardown = evm_led_teardown,
+};
+
+
+/* U18 - A/V clock generator and user switch */
+
+static int sw_gpio;
+
+static ssize_t
+sw_show(struct device *d, struct device_attribute *a, char *buf)
+{
+ char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n";
+
+ strcpy(buf, s);
+ return strlen(s);
+}
+
+static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL);
+
+static int
+evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ int status;
+
+ /* export dip switch option */
+ sw_gpio = gpio + 7;
+ status = gpio_request(sw_gpio, "user_sw");
+ if (status == 0)
+ status = gpio_direction_input(sw_gpio);
+ if (status == 0)
+ status = device_create_file(&client->dev, &dev_attr_user_sw);
+ else
+ gpio_free(sw_gpio);
+ if (status != 0)
+ sw_gpio = -EINVAL;
+
+ /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */
+ gpio_request(gpio + 3, "pll_fs2");
+ gpio_direction_output(gpio + 3, 0);
+
+ gpio_request(gpio + 2, "pll_fs1");
+ gpio_direction_output(gpio + 2, 0);
+
+ gpio_request(gpio + 1, "pll_sr");
+ gpio_direction_output(gpio + 1, 0);
+
+ return 0;
+}
+
+static int
+evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ gpio_free(gpio + 1);
+ gpio_free(gpio + 2);
+ gpio_free(gpio + 3);
+
+ if (sw_gpio > 0) {
+ device_remove_file(&client->dev, &dev_attr_user_sw);
+ gpio_free(sw_gpio);
+ }
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u18 = {
+ .gpio_base = PCF_Uxx_BASE(1),
+ .n_latch = (1 << 3) | (1 << 2) | (1 << 1),
+ .setup = evm_u18_setup,
+ .teardown = evm_u18_teardown,
+};
+
+
+/* U35 - various I/O signals used to manage USB, CF, ATA, etc */
+
+static int
+evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ /* p0 = nDRV_VBUS (initial: don't supply it) */
+ gpio_request(gpio + 0, "nDRV_VBUS");
+ gpio_direction_output(gpio + 0, 1);
+
+ /* p1 = VDDIMX_EN */
+ gpio_request(gpio + 1, "VDDIMX_EN");
+ gpio_direction_output(gpio + 1, 1);
+
+ /* p2 = VLYNQ_EN */
+ gpio_request(gpio + 2, "VLYNQ_EN");
+ gpio_direction_output(gpio + 2, 1);
+
+ /* p3 = n3V3_CF_RESET (initial: stay in reset) */
+ gpio_request(gpio + 3, "nCF_RESET");
+ gpio_direction_output(gpio + 3, 0);
+
+ /* (p4 unused) */
+
+ /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */
+ gpio_request(gpio + 5, "WLAN_RESET");
+ gpio_direction_output(gpio + 5, 1);
+
+ /* p6 = nATA_SEL (initial: select) */
+ gpio_request(gpio + 6, "nATA_SEL");
+ gpio_direction_output(gpio + 6, 0);
+
+ /* p7 = nCF_SEL (initial: deselect) */
+ gpio_request(gpio + 7, "nCF_SEL");
+ gpio_direction_output(gpio + 7, 1);
+
+ return 0;
+}
+
+static int
+evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ gpio_free(gpio + 7);
+ gpio_free(gpio + 6);
+ gpio_free(gpio + 5);
+ gpio_free(gpio + 3);
+ gpio_free(gpio + 2);
+ gpio_free(gpio + 1);
+ gpio_free(gpio + 0);
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u35 = {
+ .gpio_base = PCF_Uxx_BASE(2),
+ .setup = evm_u35_setup,
+ .teardown = evm_u35_teardown,
+};
+
+/*----------------------------------------------------------------------*/
+
+/* Most of this EEPROM is unused, but U-Boot uses some data:
+ * - 0x7f00, 6 bytes Ethernet Address
+ * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
+ * - ... newer boards may have more
+ */
+
+static struct at24_platform_data eeprom_info = {
+ .byte_len = (256*1024) / 8,
+ .page_size = 64,
+ .flags = AT24_FLAG_ADDR16,
+ .setup = davinci_get_mac_addr,
+ .context = (void *)0x7f00,
+};
+
+/*
+ * MSP430 supports RTC, card detection, input from IR remote, and
+ * a bit more. It triggers interrupts on GPIO(7) from pressing
+ * buttons on the IR remote, and for card detect switches.
+ */
+static struct i2c_client *dm6446evm_msp;
+
+static int dm6446evm_msp_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ dm6446evm_msp = client;
+ return 0;
+}
+
+static int dm6446evm_msp_remove(struct i2c_client *client)
+{
+ dm6446evm_msp = NULL;
+ return 0;
+}
+
+static const struct i2c_device_id dm6446evm_msp_ids[] = {
+ { "dm6446evm_msp", 0, },
+ { /* end of list */ },
+};
+
+static struct i2c_driver dm6446evm_msp_driver = {
+ .driver.name = "dm6446evm_msp",
+ .id_table = dm6446evm_msp_ids,
+ .probe = dm6446evm_msp_probe,
+ .remove = dm6446evm_msp_remove,
+};
+
+static int dm6444evm_msp430_get_pins(void)
+{
+ static const char txbuf[2] = { 2, 4, };
+ char buf[4];
+ struct i2c_msg msg[2] = {
+ {
+ .flags = 0,
+ .len = 2,
+ .buf = (void __force *)txbuf,
+ },
+ {
+ .flags = I2C_M_RD,
+ .len = 4,
+ .buf = buf,
+ },
+ };
+ int status;
+
+ if (!dm6446evm_msp)
+ return -ENXIO;
+
+ msg[0].addr = dm6446evm_msp->addr;
+ msg[1].addr = dm6446evm_msp->addr;
+
+ /* Command 4 == get input state, returns port 2 and port3 data
+ * S Addr W [A] len=2 [A] cmd=4 [A]
+ * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
+ */
+ status = i2c_transfer(dm6446evm_msp->adapter, msg, 2);
+ if (status < 0)
+ return status;
+
+ dev_dbg(&dm6446evm_msp->dev, "PINS: %4ph\n", buf);
+
+ return (buf[3] << 8) | buf[2];
+}
+
+static int dm6444evm_mmc_get_cd(int module)
+{
+ int status = dm6444evm_msp430_get_pins();
+
+ return (status < 0) ? status : !(status & BIT(1));
+}
+
+static int dm6444evm_mmc_get_ro(int module)
+{
+ int status = dm6444evm_msp430_get_pins();
+
+ return (status < 0) ? status : status & BIT(6 + 8);
+}
+
+static struct davinci_mmc_config dm6446evm_mmc_config = {
+ .get_cd = dm6444evm_mmc_get_cd,
+ .get_ro = dm6444evm_mmc_get_ro,
+ .wires = 4,
+};
+
+static struct i2c_board_info __initdata i2c_info[] = {
+ {
+ I2C_BOARD_INFO("dm6446evm_msp", 0x23),
+ },
+ {
+ I2C_BOARD_INFO("pcf8574", 0x38),
+ .platform_data = &pcf_data_u2,
+ },
+ {
+ I2C_BOARD_INFO("pcf8574", 0x39),
+ .platform_data = &pcf_data_u18,
+ },
+ {
+ I2C_BOARD_INFO("pcf8574", 0x3a),
+ .platform_data = &pcf_data_u35,
+ },
+ {
+ I2C_BOARD_INFO("24c256", 0x50),
+ .platform_data = &eeprom_info,
+ },
+ {
+ I2C_BOARD_INFO("tlv320aic33", 0x1b),
+ },
+};
+
+/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
+ * which requires 100 usec of idle bus after i2c writes sent to it.
+ */
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 20 /* kHz */,
+ .bus_delay = 100 /* usec */,
+ .sda_pin = 44,
+ .scl_pin = 43,
+};
+
+static void __init evm_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+ i2c_add_driver(&dm6446evm_msp_driver);
+ i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+#endif
+
+#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+/* venc standard timings */
+static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
+ {
+ .name = "ntsc",
+ .timings_type = VPBE_ENC_STD,
+ .std_id = V4L2_STD_NTSC,
+ .interlaced = 1,
+ .xres = 720,
+ .yres = 480,
+ .aspect = {11, 10},
+ .fps = {30000, 1001},
+ .left_margin = 0x79,
+ .upper_margin = 0x10,
+ },
+ {
+ .name = "pal",
+ .timings_type = VPBE_ENC_STD,
+ .std_id = V4L2_STD_PAL,
+ .interlaced = 1,
+ .xres = 720,
+ .yres = 576,
+ .aspect = {54, 59},
+ .fps = {25, 1},
+ .left_margin = 0x7e,
+ .upper_margin = 0x16,
+ },
+};
+
+/* venc dv preset timings */
+static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = {
+ {
+ .name = "480p59_94",
+ .timings_type = VPBE_ENC_DV_TIMINGS,
+ .dv_timings = V4L2_DV_BT_CEA_720X480P59_94,
+ .interlaced = 0,
+ .xres = 720,
+ .yres = 480,
+ .aspect = {1, 1},
+ .fps = {5994, 100},
+ .left_margin = 0x80,
+ .upper_margin = 0x20,
+ },
+ {
+ .name = "576p50",
+ .timings_type = VPBE_ENC_DV_TIMINGS,
+ .dv_timings = V4L2_DV_BT_CEA_720X576P50,
+ .interlaced = 0,
+ .xres = 720,
+ .yres = 576,
+ .aspect = {1, 1},
+ .fps = {50, 1},
+ .left_margin = 0x7e,
+ .upper_margin = 0x30,
+ },
+};
+
+/*
+ * The outputs available from VPBE + encoders. Keep the order same
+ * as that of encoders. First those from venc followed by that from
+ * encoders. Index in the output refers to index on a particular encoder.
+ * Driver uses this index to pass it to encoder when it supports more
+ * than one output. Userspace applications use index of the array to
+ * set an output.
+ */
+static struct vpbe_output dm644xevm_vpbe_outputs[] = {
+ {
+ .output = {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .std = VENC_STD_ALL,
+ .capabilities = V4L2_OUT_CAP_STD,
+ },
+ .subdev_name = DM644X_VPBE_VENC_SUBDEV_NAME,
+ .default_mode = "ntsc",
+ .num_modes = ARRAY_SIZE(dm644xevm_enc_std_timing),
+ .modes = dm644xevm_enc_std_timing,
+ },
+ {
+ .output = {
+ .index = 1,
+ .name = "Component",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .capabilities = V4L2_OUT_CAP_DV_TIMINGS,
+ },
+ .subdev_name = DM644X_VPBE_VENC_SUBDEV_NAME,
+ .default_mode = "480p59_94",
+ .num_modes = ARRAY_SIZE(dm644xevm_enc_preset_timing),
+ .modes = dm644xevm_enc_preset_timing,
+ },
+};
+
+static struct vpbe_config dm644xevm_display_cfg = {
+ .module_name = "dm644x-vpbe-display",
+ .i2c_adapter_id = 1,
+ .osd = {
+ .module_name = DM644X_VPBE_OSD_SUBDEV_NAME,
+ },
+ .venc = {
+ .module_name = DM644X_VPBE_VENC_SUBDEV_NAME,
+ },
+ .num_outputs = ARRAY_SIZE(dm644xevm_vpbe_outputs),
+ .outputs = dm644xevm_vpbe_outputs,
+};
+
+static struct platform_device *davinci_evm_devices[] __initdata = {
+ &davinci_fb_device,
+ &rtc_dev,
+};
+
+static void __init
+davinci_evm_map_io(void)
+{
+ dm644x_init();
+}
+
+static int davinci_phy_fixup(struct phy_device *phydev)
+{
+ unsigned int control;
+ /* CRITICAL: Fix for increasing PHY signal drive strength for
+ * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
+ * signal strength was low causing TX to fail randomly. The
+ * fix is to Set bit 11 (Increased MII drive strength) of PHY
+ * register 26 (Digital Config register) on this phy. */
+ control = phy_read(phydev, 26);
+ phy_write(phydev, 26, (control | 0x800));
+ return 0;
+}
+
+#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+ IS_ENABLED(CONFIG_PATA_BK3710))
+
+#define HAS_NOR IS_ENABLED(CONFIG_MTD_PHYSMAP)
+
+#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
+
+static __init void davinci_evm_init(void)
+{
+ int ret;
+ struct clk *aemif_clk;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ ret = dm644x_gpio_register();
+ if (ret)
+ pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
+ aemif_clk = clk_get(NULL, "aemif");
+ clk_prepare_enable(aemif_clk);
+
+ if (HAS_ATA) {
+ if (HAS_NAND || HAS_NOR)
+ pr_warn("WARNING: both IDE and Flash are enabled, but they share AEMIF pins\n"
+ "\tDisable IDE for NAND/NOR support\n");
+ davinci_init_ide();
+ } else if (HAS_NAND || HAS_NOR) {
+ davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+ davinci_cfg_reg(DM644X_ATAEN_DISABLE);
+
+ /* only one device will be jumpered and detected */
+ if (HAS_NAND) {
+ platform_device_register(&davinci_evm_nandflash_device);
+
+ if (davinci_aemif_setup(&davinci_evm_nandflash_device))
+ pr_warn("%s: Cannot configure AEMIF\n",
+ __func__);
+
+#ifdef CONFIG_I2C
+ evm_leds[7].default_trigger = "nand-disk";
+#endif
+ if (HAS_NOR)
+ pr_warn("WARNING: both NAND and NOR flash are enabled; disable one of them.\n");
+ } else if (HAS_NOR)
+ platform_device_register(&davinci_evm_norflash_device);
+ }
+
+ platform_add_devices(davinci_evm_devices,
+ ARRAY_SIZE(davinci_evm_devices));
+#ifdef CONFIG_I2C
+ evm_init_i2c();
+ davinci_setup_mmc(0, &dm6446evm_mmc_config);
+#endif
+ dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
+
+ davinci_serial_init(dm644x_serial_device);
+ dm644x_init_asp();
+
+ /* irlml6401 switches over 1A, in under 8 msec */
+ davinci_setup_usb(1000, 8);
+
+ if (IS_BUILTIN(CONFIG_PHYLIB)) {
+ soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
+ /* Register the fixup for PHY on DaVinci */
+ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
+ davinci_phy_fixup);
+ }
+}
+
+MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
+ /* Maintainer: MontaVista Software <source@mvista.com> */
+ .atag_offset = 0x100,
+ .map_io = davinci_evm_map_io,
+ .init_irq = davinci_irq_init,
+ .init_time = davinci_timer_init,
+ .init_machine = davinci_evm_init,
+ .init_late = davinci_init_late,
+ .dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
+MACHINE_END