[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-davinci/clock.h b/src/kernel/linux/v4.14/arch/arm/mach-davinci/clock.h
new file mode 100644
index 0000000..fa2b837
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-davinci/clock.h
@@ -0,0 +1,143 @@
+/*
+ * TI DaVinci clock definitions
+ *
+ * Copyright (C) 2006-2007 Texas Instruments.
+ * Copyright (C) 2008-2009 Deep Root Systems, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_DAVINCI_CLOCK_H
+#define __ARCH_ARM_DAVINCI_CLOCK_H
+
+#define DAVINCI_PLL1_BASE 0x01c40800
+#define DAVINCI_PLL2_BASE 0x01c40c00
+#define MAX_PLL 2
+
+/* PLL/Reset register offsets */
+#define PLLCTL 0x100
+#define PLLCTL_PLLEN BIT(0)
+#define PLLCTL_PLLPWRDN BIT(1)
+#define PLLCTL_PLLRST BIT(3)
+#define PLLCTL_PLLDIS BIT(4)
+#define PLLCTL_PLLENSRC BIT(5)
+#define PLLCTL_CLKMODE BIT(8)
+
+#define PLLM 0x110
+#define PLLM_PLLM_MASK 0xff
+
+#define PREDIV 0x114
+#define PLLDIV1 0x118
+#define PLLDIV2 0x11c
+#define PLLDIV3 0x120
+#define POSTDIV 0x128
+#define BPDIV 0x12c
+#define PLLCMD 0x138
+#define PLLSTAT 0x13c
+#define PLLALNCTL 0x140
+#define PLLDCHANGE 0x144
+#define PLLCKEN 0x148
+#define PLLCKSTAT 0x14c
+#define PLLSYSTAT 0x150
+#define PLLDIV4 0x160
+#define PLLDIV5 0x164
+#define PLLDIV6 0x168
+#define PLLDIV7 0x16c
+#define PLLDIV8 0x170
+#define PLLDIV9 0x174
+#define PLLDIV_EN BIT(15)
+#define PLLDIV_RATIO_MASK 0x1f
+
+/*
+ * OMAP-L138 system reference guide recommends a wait for 4 OSCIN/CLKIN
+ * cycles to ensure that the PLLC has switched to bypass mode. Delay of 1us
+ * ensures we are good for all > 4MHz OSCIN/CLKIN inputs. Typically the input
+ * is ~25MHz. Units are micro seconds.
+ */
+#define PLL_BYPASS_TIME 1
+/* From OMAP-L138 datasheet table 6-4. Units are micro seconds */
+#define PLL_RESET_TIME 1
+/*
+ * From OMAP-L138 datasheet table 6-4; assuming prediv = 1, sqrt(pllm) = 4
+ * Units are micro seconds.
+ */
+#define PLL_LOCK_TIME 20
+
+#ifndef __ASSEMBLER__
+
+#include <linux/list.h>
+#include <linux/clkdev.h>
+
+#define PLLSTAT_GOSTAT BIT(0)
+#define PLLCMD_GOSET BIT(0)
+
+struct pll_data {
+ u32 phys_base;
+ void __iomem *base;
+ u32 num;
+ u32 flags;
+ u32 input_rate;
+ u32 div_ratio_mask;
+};
+#define PLL_HAS_PREDIV 0x01
+#define PLL_HAS_POSTDIV 0x02
+
+struct clk {
+ struct list_head node;
+ struct module *owner;
+ const char *name;
+ unsigned long rate;
+ unsigned long maxrate; /* H/W supported max rate */
+ u8 usecount;
+ u8 lpsc;
+ u8 gpsc;
+ u8 domain;
+ u32 flags;
+ struct clk *parent;
+ struct list_head children; /* list of children */
+ struct list_head childnode; /* parent's child list node */
+ struct pll_data *pll_data;
+ u32 div_reg;
+ unsigned long (*recalc) (struct clk *);
+ int (*set_rate) (struct clk *clk, unsigned long rate);
+ int (*round_rate) (struct clk *clk, unsigned long rate);
+ int (*reset) (struct clk *clk, bool reset);
+ void (*clk_enable) (struct clk *clk);
+ void (*clk_disable) (struct clk *clk);
+ int (*set_parent) (struct clk *clk, struct clk *parent);
+};
+
+/* Clock flags: SoC-specific flags start at BIT(16) */
+#define ALWAYS_ENABLED BIT(1)
+#define CLK_PSC BIT(2)
+#define CLK_PLL BIT(3) /* PLL-derived clock */
+#define PRE_PLL BIT(4) /* source is before PLL mult/div */
+#define PSC_SWRSTDISABLE BIT(5) /* Disable state is SwRstDisable */
+#define PSC_FORCE BIT(6) /* Force module state transtition */
+#define PSC_LRST BIT(8) /* Use local reset on enable/disable */
+
+#define CLK(dev, con, ck) \
+ { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ } \
+
+int davinci_clk_init(struct clk_lookup *clocks);
+int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
+ unsigned int mult, unsigned int postdiv);
+int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate);
+int davinci_set_refclk_rate(unsigned long rate);
+int davinci_simple_set_rate(struct clk *clk, unsigned long rate);
+int davinci_clk_reset(struct clk *clk, bool reset);
+void davinci_clk_enable(struct clk *clk);
+void davinci_clk_disable(struct clk *clk);
+
+extern struct platform_device davinci_wdt_device;
+extern void davinci_watchdog_reset(struct platform_device *);
+
+#endif
+
+#endif