[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-imx/Kconfig b/src/kernel/linux/v4.14/arch/arm/mach-imx/Kconfig
new file mode 100644
index 0000000..782699e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-imx/Kconfig
@@ -0,0 +1,590 @@
+menuconfig ARCH_MXC
+ bool "Freescale i.MX family"
+ depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
+ select ARCH_SUPPORTS_BIG_ENDIAN
+ select CLKSRC_IMX_GPT
+ select GENERIC_IRQ_CHIP
+ select GPIOLIB
+ select PINCTRL
+ select PM_OPP if PM
+ select SOC_BUS
+ select SRAM
+ help
+ Support for Freescale MXC/iMX-based family of processors
+
+if ARCH_MXC
+
+config MXC_TZIC
+ bool
+
+config MXC_AVIC
+ bool
+
+config MXC_DEBUG_BOARD
+ bool "Enable MXC debug board(for 3-stack)"
+ depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS
+ help
+ The debug board is an integral part of the MXC 3-stack(PDK)
+ platforms, it can be attached or removed from the peripheral
+ board. On debug board, several debug devices(ethernet, UART,
+ buttons, LEDs and JTAG) are implemented. Between the MCU and
+ these devices, a CPLD is added as a bridge which performs
+ data/address de-multiplexing and decode, signal level shift,
+ interrupt control and various board functions.
+
+config HAVE_EPIT
+ bool
+
+config MXC_USE_EPIT
+ bool "Use EPIT instead of GPT"
+ depends on HAVE_EPIT
+ help
+ Use EPIT as the system timer on systems that have it. Normally you
+ don't have a reason to do so as the EPIT has the same features and
+ uses the same clocks as the GPT. Anyway, on some systems the GPT
+ may be in use for other purposes.
+
+config HAVE_IMX_ANATOP
+ bool
+
+config HAVE_IMX_GPC
+ bool
+ select PM_GENERIC_DOMAINS if PM
+
+config HAVE_IMX_MMDC
+ bool
+
+config HAVE_IMX_SRC
+ def_bool y if SMP
+ select ARCH_HAS_RESET_CONTROLLER
+
+config IMX_HAVE_IOMUX_V1
+ bool
+
+config ARCH_MXC_IOMUX_V3
+ bool
+
+config SOC_IMX21
+ bool
+ select CPU_ARM926T
+ select IMX_HAVE_IOMUX_V1
+ select MXC_AVIC
+
+config SOC_IMX27
+ bool
+ select CPU_ARM926T
+ select IMX_HAVE_IOMUX_V1
+ select MXC_AVIC
+ select PINCTRL_IMX27
+
+config SOC_IMX31
+ bool
+ select CPU_V6
+ select MXC_AVIC
+
+config SOC_IMX35
+ bool
+ select ARCH_MXC_IOMUX_V3
+ select HAVE_EPIT
+ select MXC_AVIC
+ select PINCTRL_IMX35
+
+if ARCH_MULTI_V5
+
+comment "MX21 platforms:"
+
+config MACH_MX21ADS
+ bool "MX21ADS platform"
+ select IMX_HAVE_PLATFORM_IMX_FB
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select SOC_IMX21
+ help
+ Include support for MX21ADS platform. This includes specific
+ configurations for the board and its peripherals.
+
+comment "MX27 platforms:"
+
+config MACH_MX27ADS
+ bool "MX27ADS platform"
+ select IMX_HAVE_PLATFORM_IMX_FB
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_MXC_W1
+ select SOC_IMX27
+ help
+ Include support for MX27ADS platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX27_3DS
+ bool "MX27PDK platform"
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_FB
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_IMX_SSI
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MX2_CAMERA
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_DEBUG_BOARD
+ select USB_ULPI_VIEWPORT if USB_ULPI
+ select SOC_IMX27
+ help
+ Include support for MX27PDK platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_IMX27_VISSTRIM_M10
+ bool "Vista Silicon i.MX27 Visstrim_m10"
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_SSI
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MX2_CAMERA
+ select IMX_HAVE_PLATFORM_MX2_EMMA
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select LEDS_GPIO_REGISTER
+ select SOC_IMX27
+ help
+ Include support for Visstrim_m10 platform and its different variants.
+ This includes specific configurations for the board and its
+ peripherals.
+
+config MACH_PCA100
+ bool "Phytec phyCARD-s (pca100)"
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_FB
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_SSI
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_MXC_W1
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select USB_ULPI_VIEWPORT if USB_ULPI
+ select SOC_IMX27
+ help
+ Include support for phyCARD-s (aka pca100) platform. This
+ includes specific configurations for the module and its peripherals.
+
+config MACH_IMX27_DT
+ bool "Support i.MX27 platforms from device tree"
+ select SOC_IMX27
+ help
+ Include support for Freescale i.MX27 based platforms
+ using the device tree for discovery
+
+endif
+
+if ARCH_MULTI_V6
+
+comment "MX31 platforms:"
+
+config MACH_MX31ADS
+ bool "Support MX31ADS platforms"
+ default y
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_SSI
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select SOC_IMX31
+ help
+ Include support for MX31ADS platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX31ADS_WM1133_EV1
+ bool "Support Wolfson Microelectronics 1133-EV1 module"
+ depends on MACH_MX31ADS
+ depends on MFD_WM8350_I2C
+ depends on REGULATOR_WM8350 = y
+ help
+ Include support for the Wolfson Microelectronics 1133-EV1 PMU
+ and audio module for the MX31ADS platform.
+
+config MACH_MX31LILLY
+ bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select USB_ULPI_VIEWPORT if USB_ULPI
+ select SOC_IMX31
+ help
+ Include support for mx31 based LILLY1131 modules. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_MX31LITE
+ bool "Support MX31 LITEKIT (LogicPD)"
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_MXC_RTC
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select LEDS_GPIO_REGISTER
+ select USB_ULPI_VIEWPORT if USB_ULPI
+ select SOC_IMX31
+ help
+ Include support for MX31 LITEKIT platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_PCM037
+ bool "Support Phytec pcm037 (i.MX31) platforms"
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_MXC_W1
+ select USB_ULPI_VIEWPORT if USB_ULPI
+ select SOC_IMX31
+ help
+ Include support for Phytec pcm037 platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_PCM037_EET
+ bool "Support pcm037 EET board extensions"
+ depends on MACH_PCM037
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Add support for PCM037 EET baseboard extensions. If you are using the
+ OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+ command-line parameter.
+
+config MACH_MX31_3DS
+ bool "Support MX31PDK (3DS)"
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_IMX_SSI
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_DEBUG_BOARD
+ select USB_ULPI_VIEWPORT if USB_ULPI
+ select SOC_IMX31
+ help
+ Include support for MX31PDK (3DS) platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+ bool "Make the MXC NAND driver use the in flash Bad Block Table"
+ depends on MACH_MX31_3DS
+ depends on MTD_NAND_MXC
+ help
+ Enable this if you want that the MXC NAND driver uses the in flash
+ Bad Block Table to know what blocks are bad instead of scanning the
+ entire flash looking for bad block markers.
+
+config MACH_MX31MOBOARD
+ bool "Support mx31moboard platforms (EPFL Mobots group)"
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_SSI
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select LEDS_GPIO_REGISTER
+ select USB_ULPI_VIEWPORT if USB_ULPI
+ select SOC_IMX31
+ help
+ Include support for mx31moboard platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_QONG
+ bool "Support Dave/DENX QongEVB-LITE platform"
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select SOC_IMX31
+ help
+ Include support for Dave/DENX QongEVB-LITE platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+ bool "Support Atmark Armadillo-500 Development Base Board"
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select USB_ULPI_VIEWPORT if USB_ULPI
+ select SOC_IMX31
+ help
+ Include support for Atmark Armadillo-500 platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_KZM_ARM11_01
+ bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select SOC_IMX31
+ help
+ Include support for KZM-ARM11-01. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_BUG
+ bool "Support Buglabs BUGBase platform"
+ default y
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select SOC_IMX31
+ help
+ Include support for BUGBase 1.3 platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_IMX31_DT
+ bool "Support i.MX31 platforms from device tree"
+ select SOC_IMX31
+ help
+ Include support for Freescale i.MX31 based platforms
+ using the device tree for discovery.
+
+comment "MX35 platforms:"
+
+config MACH_IMX35_DT
+ bool "Support i.MX35 platforms from device tree"
+ select SOC_IMX35
+ help
+ Include support for Freescale i.MX35 based platforms
+ using the device tree for discovery.
+
+config MACH_PCM043
+ bool "Support Phytec pcm043 (i.MX35) platforms"
+ select IMX_HAVE_PLATFORM_FLEXCAN
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_SSI
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select USB_ULPI_VIEWPORT if USB_ULPI
+ select SOC_IMX35
+ help
+ Include support for Phytec pcm043 platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+ bool "Support MX35PDK platform"
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_FB
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_MXC_RTC
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select MXC_DEBUG_BOARD
+ select SOC_IMX35
+ help
+ Include support for MX35PDK platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_VPR200
+ bool "Support VPR200 platform"
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select SOC_IMX35
+ help
+ Include support for VPR200 platform. This includes specific
+ configurations for the board and its peripherals.
+
+endif
+
+comment "Device tree only"
+
+if ARCH_MULTI_V4T
+
+config SOC_IMX1
+ bool "i.MX1 support"
+ select CPU_ARM920T
+ select MXC_AVIC
+ select PINCTRL_IMX1
+ help
+ This enables support for Freescale i.MX1 processor
+
+endif
+
+if ARCH_MULTI_V5
+
+config SOC_IMX25
+ bool "i.MX25 support"
+ select ARCH_MXC_IOMUX_V3
+ select CPU_ARM926T
+ select MXC_AVIC
+ select PINCTRL_IMX25
+ help
+ This enables support for Freescale i.MX25 processor
+endif
+
+if ARCH_MULTI_V7
+
+comment "Cortex-A platforms"
+
+config SOC_IMX5
+ bool
+ select HAVE_IMX_SRC
+ select MXC_TZIC
+
+config SOC_IMX50
+ bool "i.MX50 support"
+ select PINCTRL_IMX50
+ select SOC_IMX5
+
+ help
+ This enables support for Freescale i.MX50 processor.
+
+config SOC_IMX51
+ bool "i.MX51 support"
+ select PINCTRL_IMX51
+ select SOC_IMX5
+ help
+ This enables support for Freescale i.MX51 processor
+
+config SOC_IMX53
+ bool "i.MX53 support"
+ select PINCTRL_IMX53
+ select SOC_IMX5
+
+ help
+ This enables support for Freescale i.MX53 processor.
+
+config SOC_IMX6
+ bool
+ select ARM_CPU_SUSPEND if PM
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_775420
+ select ARM_GIC
+ select HAVE_IMX_ANATOP
+ select HAVE_IMX_GPC
+ select HAVE_IMX_MMDC
+ select HAVE_IMX_SRC
+ select MFD_SYSCON
+ select PL310_ERRATA_769419 if CACHE_L2X0
+
+config SOC_IMX6Q
+ bool "i.MX6 Quad/DualLite support"
+ select ARM_ERRATA_764369 if SMP
+ select HAVE_ARM_SCU if SMP
+ select HAVE_ARM_TWD
+ select PINCTRL_IMX6Q
+ select SOC_IMX6
+
+ help
+ This enables support for Freescale i.MX6 Quad processor.
+
+config SOC_IMX6SL
+ bool "i.MX6 SoloLite support"
+ select PINCTRL_IMX6SL
+ select SOC_IMX6
+
+ help
+ This enables support for Freescale i.MX6 SoloLite processor.
+
+config SOC_IMX6SX
+ bool "i.MX6 SoloX support"
+ select PINCTRL_IMX6SX
+ select SOC_IMX6
+
+ help
+ This enables support for Freescale i.MX6 SoloX processor.
+
+config SOC_IMX6UL
+ bool "i.MX6 UltraLite support"
+ select PINCTRL_IMX6UL
+ select SOC_IMX6
+
+ help
+ This enables support for Freescale i.MX6 UltraLite processor.
+
+config SOC_IMX7D
+ bool "i.MX7 Dual support"
+ select PINCTRL_IMX7D
+ select ARM_GIC
+ select HAVE_ARM_ARCH_TIMER
+ select HAVE_IMX_ANATOP
+ select HAVE_IMX_MMDC
+ select HAVE_IMX_SRC
+ select IMX_GPCV2
+ help
+ This enables support for Freescale i.MX7 Dual processor.
+
+config SOC_LS1021A
+ bool "Freescale LS1021A support"
+ select ARM_GIC
+ select HAVE_ARM_ARCH_TIMER
+ select ZONE_DMA if ARM_LPAE
+ help
+ This enables support for Freescale LS1021A processor.
+
+endif
+
+comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms"
+
+if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
+
+config SOC_VF610
+ bool "Vybrid Family VF610 support"
+ select ARM_GIC if ARCH_MULTI_V7
+ select PINCTRL_VF610
+
+ help
+ This enables support for Freescale Vybrid VF610 processor.
+
+choice
+ prompt "Clocksource for scheduler clock"
+ depends on SOC_VF610
+ default VF_USE_ARM_GLOBAL_TIMER
+
+ config VF_USE_ARM_GLOBAL_TIMER
+ bool "Use ARM Global Timer"
+ depends on ARCH_MULTI_V7
+ select ARM_GLOBAL_TIMER
+ select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
+ help
+ Use the ARM Global Timer as clocksource
+
+ config VF_USE_PIT_TIMER
+ bool "Use PIT timer"
+ select VF_PIT_TIMER
+ help
+ Use SoC Periodic Interrupt Timer (PIT) as clocksource
+
+endchoice
+
+endif
+
+source "arch/arm/mach-imx/devices/Kconfig"
+
+endif