[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-iop33x/Kconfig b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/Kconfig
new file mode 100644
index 0000000..9aa016b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/Kconfig
@@ -0,0 +1,21 @@
+if ARCH_IOP33X
+
+menu "IOP33x Implementation Options"
+
+comment "IOP33x Platform Types"
+
+config ARCH_IQ80331
+ bool "Enable support for IQ80331"
+ help
+ Say Y here if you want to run your kernel on the Intel IQ80331
+ evaluation kit for the IOP331 chipset.
+
+config MACH_IQ80332
+ bool "Enable support for IQ80332"
+ help
+ Say Y here if you want to run your kernel on the Intel IQ80332
+ evaluation kit for the IOP332 chipset.
+
+endmenu
+
+endif
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-iop33x/Makefile b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/Makefile
new file mode 100644
index 0000000..e95db30
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y := irq.o uart.o
+
+obj-$(CONFIG_ARCH_IQ80331) += iq80331.o
+obj-$(CONFIG_MACH_IQ80332) += iq80332.o
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-iop33x/Makefile.boot b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/Makefile.boot
new file mode 100644
index 0000000..760a0ef
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y += 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/adma.h b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/adma.h
new file mode 100644
index 0000000..8aa7159
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/adma.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef IOP33X_ADMA_H
+#define IOP33X_ADMA_H
+#include <asm/hardware/iop3xx-adma.h>
+#endif
+
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/entry-macro.S b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/entry-macro.S
new file mode 100644
index 0000000..0a398fe
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/entry-macro.S
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IOP33x-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/iop33x.h>
+
+ .macro get_irqnr_preamble, base, tmp
+ mrc p15, 0, \tmp, c15, c1, 0
+ orr \tmp, \tmp, #(1 << 6)
+ mcr p15, 0, \tmp, c15, c1, 0 @ Enable cp6 access
+ mrc p15, 0, \tmp, c15, c1, 0
+ mov \tmp, \tmp
+ sub pc, pc, #4 @ cp_wait
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ mrc p6, 0, \irqstat, c14, c0, 0 @ Read IINTVEC
+ cmp \irqstat, #0
+ mrceq p6, 0, \irqstat, c14, c0, 0 @ erratum 63 workaround
+ adds \irqnr, \irqstat, #1
+ movne \irqnr, \irqstat, lsr #2
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ mrc p15, 0, \tmp1, c15, c1, 0
+ ands \tmp2, \tmp1, #(1 << 6)
+ bicne \tmp1, \tmp1, #(1 << 6)
+ mcrne p15, 0, \tmp1, c15, c1, 0 @ Disable cp6 access
+ .endm
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/hardware.h b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/hardware.h
new file mode 100644
index 0000000..020bafb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/hardware.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-iop33x/include/mach/hardware.h
+ */
+
+#ifndef __HARDWARE_H
+#define __HARDWARE_H
+
+#include <asm/types.h>
+
+/*
+ * Note about PCI IO space mappings
+ *
+ * To make IO space accesses efficient, we store virtual addresses in
+ * the IO resources.
+ *
+ * The PCI IO space is located at virtual 0xfe000000 from physical
+ * 0x90000000. The PCI BARs must be programmed with physical addresses,
+ * but when we read them, we convert them to virtual addresses. See
+ * arch/arm/mach-iop3xx/iop3xx-pci.c
+ */
+
+#ifndef __ASSEMBLY__
+void iop33x_init_irq(void);
+
+extern struct platform_device iop33x_uart0_device;
+extern struct platform_device iop33x_uart1_device;
+#endif
+
+
+/*
+ * Generic chipset bits
+ *
+ */
+#include "iop33x.h"
+
+/*
+ * Board specific bits
+ */
+#include "iq80331.h"
+#include "iq80332.h"
+
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/iop33x.h b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/iop33x.h
new file mode 100644
index 0000000..c951226
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/iop33x.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/iop33x.h
+ *
+ * Intel IOP33X Chip definitions
+ *
+ * Author: Dave Jiang (dave.jiang@intel.com)
+ * Copyright (C) 2003, 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOP33X_H
+#define __IOP33X_H
+
+/*
+ * Peripherals that are shared between the iop32x and iop33x but
+ * located at different addresses.
+ */
+#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
+
+#include <asm/hardware/iop3xx.h>
+
+/* UARTs */
+#define IOP33X_UART0_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1700)
+#define IOP33X_UART0_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1700)
+#define IOP33X_UART1_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740)
+#define IOP33X_UART1_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740)
+
+/* ATU Parameters
+ * set up a 1:1 bus to physical ram relationship
+ * w/ pci on top of physical ram in memory map
+ */
+#define IOP33X_MAX_RAM_SIZE 0x80000000UL
+#define IOP3XX_MAX_RAM_SIZE IOP33X_MAX_RAM_SIZE
+#define IOP3XX_PCI_LOWER_MEM_BA (PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
+
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/iq80331.h b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/iq80331.h
new file mode 100644
index 0000000..c7e68d8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/iq80331.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-iop33x/include/mach/iq80331.h
+ *
+ * Intel IQ80331 evaluation board registers
+ */
+
+#ifndef __IQ80331_H
+#define __IQ80331_H
+
+#define IQ80331_7SEG_1 0xce840000 /* 7-Segment MSB */
+#define IQ80331_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */
+#define IQ80331_ROTARY_SW 0xce8d0000 /* Rotary Switch */
+#define IQ80331_BATT_STAT 0xce8f0000 /* Battery Status */
+
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/iq80332.h b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/iq80332.h
new file mode 100644
index 0000000..749b44b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/iq80332.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-iop33x/include/mach/iq80332.h
+ *
+ * Intel IQ80332 evaluation board registers
+ */
+
+#ifndef __IQ80332_H
+#define __IQ80332_H
+
+#define IQ80332_7SEG_1 0xce840000 /* 7-Segment MSB */
+#define IQ80332_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */
+#define IQ80332_ROTARY_SW 0xce8d0000 /* Rotary Switch */
+#define IQ80332_BATT_STAT 0xce8f0000 /* Battery Status */
+
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/irqs.h b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/irqs.h
new file mode 100644
index 0000000..707628a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/irqs.h
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/irqs.h
+ *
+ * Author: Dave Jiang (dave.jiang@intel.com)
+ * Copyright: (C) 2003 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IRQS_H
+#define __IRQS_H
+
+/*
+ * IOP80331 chipset interrupts
+ */
+#define IRQ_IOP33X_DMA0_EOT 0
+#define IRQ_IOP33X_DMA0_EOC 1
+#define IRQ_IOP33X_DMA1_EOT 2
+#define IRQ_IOP33X_DMA1_EOC 3
+#define IRQ_IOP33X_AA_EOT 6
+#define IRQ_IOP33X_AA_EOC 7
+#define IRQ_IOP33X_TIMER0 8
+#define IRQ_IOP33X_TIMER1 9
+#define IRQ_IOP33X_I2C_0 10
+#define IRQ_IOP33X_I2C_1 11
+#define IRQ_IOP33X_MSG 12
+#define IRQ_IOP33X_MSGIBQ 13
+#define IRQ_IOP33X_ATU_BIST 14
+#define IRQ_IOP33X_PERFMON 15
+#define IRQ_IOP33X_CORE_PMU 16
+#define IRQ_IOP33X_XINT0 24
+#define IRQ_IOP33X_XINT1 25
+#define IRQ_IOP33X_XINT2 26
+#define IRQ_IOP33X_XINT3 27
+#define IRQ_IOP33X_XINT8 32
+#define IRQ_IOP33X_XINT9 33
+#define IRQ_IOP33X_XINT10 34
+#define IRQ_IOP33X_XINT11 35
+#define IRQ_IOP33X_XINT12 36
+#define IRQ_IOP33X_XINT13 37
+#define IRQ_IOP33X_XINT14 38
+#define IRQ_IOP33X_XINT15 39
+#define IRQ_IOP33X_UART0 51
+#define IRQ_IOP33X_UART1 52
+#define IRQ_IOP33X_PBIE 53
+#define IRQ_IOP33X_ATU_CRW 54
+#define IRQ_IOP33X_ATU_ERR 55
+#define IRQ_IOP33X_MCU_ERR 56
+#define IRQ_IOP33X_DMA0_ERR 57
+#define IRQ_IOP33X_DMA1_ERR 58
+#define IRQ_IOP33X_AA_ERR 60
+#define IRQ_IOP33X_MSG_ERR 62
+#define IRQ_IOP33X_HPI 63
+
+#define NR_IRQS 64
+
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/time.h b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/time.h
new file mode 100644
index 0000000..801f8fd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/time.h
@@ -0,0 +1,5 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _IOP33X_TIME_H_
+#define _IOP33X_TIME_H_
+#define IRQ_IOP_TIMER0 IRQ_IOP33X_TIMER0
+#endif
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/uncompress.h b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/uncompress.h
new file mode 100644
index 0000000..62b71cd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-iop33x/include/mach/uncompress.h
+ */
+
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+volatile u32 *uart_base;
+
+#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+ while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+ barrier();
+ uart_base[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+ if (machine_is_iq80331() || machine_is_iq80332())
+ uart_base = (volatile u32 *)IOP33X_UART0_PHYS;
+ else
+ uart_base = (volatile u32 *)0xfe800000;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup() __arch_decomp_setup(arch_id)
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-iop33x/iq80331.c b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/iq80331.c
new file mode 100644
index 0000000..e2cb65c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/iq80331.c
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-iop33x/iq80331.c
+ *
+ * Board support code for the Intel IQ80331 platform.
+ *
+ * Author: Dave Jiang <dave.jiang@intel.com>
+ * Copyright (C) 2003 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <mach/time.h>
+
+/*
+ * IQ80331 timer tick configuration.
+ */
+static void __init iq80331_timer_init(void)
+{
+ /* D-Step parts run at a higher internal bus frequency */
+ if (*IOP3XX_ATURID >= 0xa)
+ iop_init_time(333000000);
+ else
+ iop_init_time(266000000);
+}
+
+
+/*
+ * IQ80331 PCI.
+ */
+static int __init
+iq80331_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ if (slot == 1 && pin == 1) {
+ /* PCI-X Slot INTA */
+ irq = IRQ_IOP33X_XINT1;
+ } else if (slot == 1 && pin == 2) {
+ /* PCI-X Slot INTB */
+ irq = IRQ_IOP33X_XINT2;
+ } else if (slot == 1 && pin == 3) {
+ /* PCI-X Slot INTC */
+ irq = IRQ_IOP33X_XINT3;
+ } else if (slot == 1 && pin == 4) {
+ /* PCI-X Slot INTD */
+ irq = IRQ_IOP33X_XINT0;
+ } else if (slot == 2) {
+ /* GigE */
+ irq = IRQ_IOP33X_XINT2;
+ } else {
+ printk(KERN_ERR "iq80331_pci_map_irq() called for unknown "
+ "device PCI:%d:%d:%d\n", dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ irq = -1;
+ }
+
+ return irq;
+}
+
+static struct hw_pci iq80331_pci __initdata = {
+ .nr_controllers = 1,
+ .ops = &iop3xx_ops,
+ .setup = iop3xx_pci_setup,
+ .preinit = iop3xx_pci_preinit_cond,
+ .map_irq = iq80331_pci_map_irq,
+};
+
+static int __init iq80331_pci_init(void)
+{
+ if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
+ machine_is_iq80331())
+ pci_common_init(&iq80331_pci);
+
+ return 0;
+}
+
+subsys_initcall(iq80331_pci_init);
+
+
+/*
+ * IQ80331 machine initialisation.
+ */
+static struct physmap_flash_data iq80331_flash_data = {
+ .width = 1,
+};
+
+static struct resource iq80331_flash_resource = {
+ .start = 0xc0000000,
+ .end = 0xc07fffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device iq80331_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &iq80331_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &iq80331_flash_resource,
+};
+
+static struct resource iq80331_gpio_res[] = {
+ DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x1780), 0x10),
+};
+
+static void __init iq80331_init_machine(void)
+{
+ platform_device_register_simple("gpio-iop", 0,
+ iq80331_gpio_res,
+ ARRAY_SIZE(iq80331_gpio_res));
+ platform_device_register(&iop3xx_i2c0_device);
+ platform_device_register(&iop3xx_i2c1_device);
+ platform_device_register(&iop33x_uart0_device);
+ platform_device_register(&iop33x_uart1_device);
+ platform_device_register(&iq80331_flash_device);
+ platform_device_register(&iop3xx_dma_0_channel);
+ platform_device_register(&iop3xx_dma_1_channel);
+ platform_device_register(&iop3xx_aau_channel);
+}
+
+MACHINE_START(IQ80331, "Intel IQ80331")
+ /* Maintainer: Intel Corp. */
+ .atag_offset = 0x100,
+ .map_io = iop3xx_map_io,
+ .init_irq = iop33x_init_irq,
+ .init_time = iq80331_timer_init,
+ .init_machine = iq80331_init_machine,
+ .restart = iop3xx_restart,
+MACHINE_END
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-iop33x/iq80332.c b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/iq80332.c
new file mode 100644
index 0000000..0b6269d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/iq80332.c
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-iop33x/iq80332.c
+ *
+ * Board support code for the Intel IQ80332 platform.
+ *
+ * Author: Dave Jiang <dave.jiang@intel.com>
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <mach/time.h>
+
+/*
+ * IQ80332 timer tick configuration.
+ */
+static void __init iq80332_timer_init(void)
+{
+ /* D-Step parts and the iop333 run at a higher internal bus frequency */
+ if (*IOP3XX_ATURID >= 0xa || *IOP3XX_ATUDID == 0x374)
+ iop_init_time(333000000);
+ else
+ iop_init_time(266000000);
+}
+
+
+/*
+ * IQ80332 PCI.
+ */
+static int __init
+iq80332_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ if (slot == 4 && pin == 1) {
+ /* PCI-X Slot INTA */
+ irq = IRQ_IOP33X_XINT0;
+ } else if (slot == 4 && pin == 2) {
+ /* PCI-X Slot INTB */
+ irq = IRQ_IOP33X_XINT1;
+ } else if (slot == 4 && pin == 3) {
+ /* PCI-X Slot INTC */
+ irq = IRQ_IOP33X_XINT2;
+ } else if (slot == 4 && pin == 4) {
+ /* PCI-X Slot INTD */
+ irq = IRQ_IOP33X_XINT3;
+ } else if (slot == 6) {
+ /* GigE */
+ irq = IRQ_IOP33X_XINT2;
+ } else {
+ printk(KERN_ERR "iq80332_pci_map_irq() called for unknown "
+ "device PCI:%d:%d:%d\n", dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ irq = -1;
+ }
+
+ return irq;
+}
+
+static struct hw_pci iq80332_pci __initdata = {
+ .nr_controllers = 1,
+ .ops = &iop3xx_ops,
+ .setup = iop3xx_pci_setup,
+ .preinit = iop3xx_pci_preinit_cond,
+ .map_irq = iq80332_pci_map_irq,
+};
+
+static int __init iq80332_pci_init(void)
+{
+ if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
+ machine_is_iq80332())
+ pci_common_init(&iq80332_pci);
+
+ return 0;
+}
+
+subsys_initcall(iq80332_pci_init);
+
+
+/*
+ * IQ80332 machine initialisation.
+ */
+static struct physmap_flash_data iq80332_flash_data = {
+ .width = 1,
+};
+
+static struct resource iq80332_flash_resource = {
+ .start = 0xc0000000,
+ .end = 0xc07fffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device iq80332_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &iq80332_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &iq80332_flash_resource,
+};
+
+static struct resource iq80332_gpio_res[] = {
+ DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x1780), 0x10),
+};
+
+static void __init iq80332_init_machine(void)
+{
+ platform_device_register_simple("gpio-iop", 0,
+ iq80332_gpio_res,
+ ARRAY_SIZE(iq80332_gpio_res));
+ platform_device_register(&iop3xx_i2c0_device);
+ platform_device_register(&iop3xx_i2c1_device);
+ platform_device_register(&iop33x_uart0_device);
+ platform_device_register(&iop33x_uart1_device);
+ platform_device_register(&iq80332_flash_device);
+ platform_device_register(&iop3xx_dma_0_channel);
+ platform_device_register(&iop3xx_dma_1_channel);
+ platform_device_register(&iop3xx_aau_channel);
+}
+
+MACHINE_START(IQ80332, "Intel IQ80332")
+ /* Maintainer: Intel Corp. */
+ .atag_offset = 0x100,
+ .map_io = iop3xx_map_io,
+ .init_irq = iop33x_init_irq,
+ .init_time = iq80332_timer_init,
+ .init_machine = iq80332_init_machine,
+ .restart = iop3xx_restart,
+MACHINE_END
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-iop33x/irq.c b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/irq.c
new file mode 100644
index 0000000..c99ec8d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/irq.c
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/mach-iop33x/irq.c
+ *
+ * Generic IOP331 IRQ handling functionality
+ *
+ * Author: Dave Jiang <dave.jiang@intel.com>
+ * Copyright (C) 2003 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+static u32 iop33x_mask0;
+static u32 iop33x_mask1;
+
+static void intctl0_write(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
+}
+
+static void intctl1_write(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c1, c0, 0" : : "r" (val));
+}
+
+static void intstr0_write(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c2, c0, 0" : : "r" (val));
+}
+
+static void intstr1_write(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c3, c0, 0" : : "r" (val));
+}
+
+static void intbase_write(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c12, c0, 0" : : "r" (val));
+}
+
+static void intsize_write(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c13, c0, 0" : : "r" (val));
+}
+
+static void
+iop33x_irq_mask1 (struct irq_data *d)
+{
+ iop33x_mask0 &= ~(1 << d->irq);
+ intctl0_write(iop33x_mask0);
+}
+
+static void
+iop33x_irq_mask2 (struct irq_data *d)
+{
+ iop33x_mask1 &= ~(1 << (d->irq - 32));
+ intctl1_write(iop33x_mask1);
+}
+
+static void
+iop33x_irq_unmask1(struct irq_data *d)
+{
+ iop33x_mask0 |= 1 << d->irq;
+ intctl0_write(iop33x_mask0);
+}
+
+static void
+iop33x_irq_unmask2(struct irq_data *d)
+{
+ iop33x_mask1 |= (1 << (d->irq - 32));
+ intctl1_write(iop33x_mask1);
+}
+
+struct irq_chip iop33x_irqchip1 = {
+ .name = "IOP33x-1",
+ .irq_ack = iop33x_irq_mask1,
+ .irq_mask = iop33x_irq_mask1,
+ .irq_unmask = iop33x_irq_unmask1,
+};
+
+struct irq_chip iop33x_irqchip2 = {
+ .name = "IOP33x-2",
+ .irq_ack = iop33x_irq_mask2,
+ .irq_mask = iop33x_irq_mask2,
+ .irq_unmask = iop33x_irq_unmask2,
+};
+
+void __init iop33x_init_irq(void)
+{
+ int i;
+
+ iop_init_cp6_handler();
+
+ intctl0_write(0);
+ intctl1_write(0);
+ intstr0_write(0);
+ intstr1_write(0);
+ intbase_write(0);
+ intsize_write(1);
+ if (machine_is_iq80331())
+ *IOP3XX_PCIIRSR = 0x0f;
+
+ for (i = 0; i < NR_IRQS; i++) {
+ irq_set_chip_and_handler(i,
+ (i < 32) ? &iop33x_irqchip1 : &iop33x_irqchip2,
+ handle_level_irq);
+ irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
+ }
+}
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-iop33x/uart.c b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/uart.c
new file mode 100644
index 0000000..bbf54d7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-iop33x/uart.c
@@ -0,0 +1,103 @@
+/*
+ * arch/arm/mach-iop33x/uart.c
+ *
+ * Author: Dave Jiang (dave.jiang@intel.com)
+ * Copyright (C) 2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/io.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <mach/hardware.h>
+#include <asm/hardware/iop3xx.h>
+#include <asm/mach/arch.h>
+
+#define IOP33X_UART_XTAL 33334000
+
+static struct plat_serial8250_port iop33x_uart0_data[] = {
+ {
+ .membase = (char *)IOP33X_UART0_VIRT,
+ .mapbase = IOP33X_UART0_PHYS,
+ .irq = IRQ_IOP33X_UART0,
+ .uartclk = IOP33X_UART_XTAL,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_SKIP_TEST,
+ },
+ { },
+};
+
+static struct resource iop33x_uart0_resources[] = {
+ [0] = {
+ .start = IOP33X_UART0_PHYS,
+ .end = IOP33X_UART0_PHYS + 0x3f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP33X_UART0,
+ .end = IRQ_IOP33X_UART0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device iop33x_uart0_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = iop33x_uart0_data,
+ },
+ .num_resources = 2,
+ .resource = iop33x_uart0_resources,
+};
+
+
+static struct resource iop33x_uart1_resources[] = {
+ [0] = {
+ .start = IOP33X_UART1_PHYS,
+ .end = IOP33X_UART1_PHYS + 0x3f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP33X_UART1,
+ .end = IRQ_IOP33X_UART1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct plat_serial8250_port iop33x_uart1_data[] = {
+ {
+ .membase = (char *)IOP33X_UART1_VIRT,
+ .mapbase = IOP33X_UART1_PHYS,
+ .irq = IRQ_IOP33X_UART1,
+ .uartclk = IOP33X_UART_XTAL,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_SKIP_TEST,
+ },
+ { },
+};
+
+struct platform_device iop33x_uart1_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = iop33x_uart1_data,
+ },
+ .num_resources = 2,
+ .resource = iop33x_uart1_resources,
+};