[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/arch/arm/mach-pxa/pxa3xx.c b/src/kernel/linux/v4.14/arch/arm/mach-pxa/pxa3xx.c
new file mode 100644
index 0000000..0cc9f12
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/arm/mach-pxa/pxa3xx.c
@@ -0,0 +1,470 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa3xx.c
+ *
+ * code specific to pxa3xx aka Monahans
+ *
+ * Copyright (C) 2006 Marvell International Ltd.
+ *
+ * 2007-09-02: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio-pxa.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/syscore_ops.h>
+#include <linux/i2c/pxa-i2c.h>
+
+#include <asm/mach/map.h>
+#include <asm/suspend.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/reset.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include "pm.h"
+#include <mach/dma.h>
+#include <mach/smemc.h>
+#include <mach/irqs.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#define PECR_IE(n) ((1 << ((n) * 2)) << 28)
+#define PECR_IS(n) ((1 << ((n) * 2)) << 29)
+
+extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
+
+/*
+ * NAND NFC: DFI bus arbitration subset
+ */
+#define NDCR (*(volatile u32 __iomem*)(NAND_VIRT + 0))
+#define NDCR_ND_ARB_EN (1 << 12)
+#define NDCR_ND_ARB_CNTL (1 << 19)
+
+#ifdef CONFIG_PM
+
+#define ISRAM_START 0x5c000000
+#define ISRAM_SIZE SZ_256K
+
+static void __iomem *sram;
+static unsigned long wakeup_src;
+
+/*
+ * Enter a standby mode (S0D1C2 or S0D2C2). Upon wakeup, the dynamic
+ * memory controller has to be reinitialised, so we place some code
+ * in the SRAM to perform this function.
+ *
+ * We disable FIQs across the standby - otherwise, we might receive a
+ * FIQ while the SDRAM is unavailable.
+ */
+static void pxa3xx_cpu_standby(unsigned int pwrmode)
+{
+ void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);
+
+ memcpy_toio(sram + 0x8000, pm_enter_standby_start,
+ pm_enter_standby_end - pm_enter_standby_start);
+
+ AD2D0SR = ~0;
+ AD2D1SR = ~0;
+ AD2D0ER = wakeup_src;
+ AD2D1ER = 0;
+ ASCR = ASCR;
+ ARSR = ARSR;
+
+ local_fiq_disable();
+ fn(pwrmode);
+ local_fiq_enable();
+
+ AD2D0ER = 0;
+ AD2D1ER = 0;
+}
+
+/*
+ * NOTE: currently, the OBM (OEM Boot Module) binary comes along with
+ * PXA3xx development kits assumes that the resuming process continues
+ * with the address stored within the first 4 bytes of SDRAM. The PSPR
+ * register is used privately by BootROM and OBM, and _must_ be set to
+ * 0x5c014000 for the moment.
+ */
+static void pxa3xx_cpu_pm_suspend(void)
+{
+ volatile unsigned long *p = (volatile void *)0xc0000000;
+ unsigned long saved_data = *p;
+#ifndef CONFIG_IWMMXT
+ u64 acc0;
+
+ asm volatile(".arch_extension xscale\n\t"
+ "mra %Q0, %R0, acc0" : "=r" (acc0));
+#endif
+
+ /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
+ CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
+ CKENB |= 1 << (CKEN_HSIO2 & 0x1f);
+
+ /* clear and setup wakeup source */
+ AD3SR = ~0;
+ AD3ER = wakeup_src;
+ ASCR = ASCR;
+ ARSR = ARSR;
+
+ PCFR |= (1u << 13); /* L1_DIS */
+ PCFR &= ~((1u << 12) | (1u << 1)); /* L0_EN | SL_ROD */
+
+ PSPR = 0x5c014000;
+
+ /* overwrite with the resume address */
+ *p = __pa_symbol(cpu_resume);
+
+ cpu_suspend(0, pxa3xx_finish_suspend);
+
+ *p = saved_data;
+
+ AD3ER = 0;
+
+#ifndef CONFIG_IWMMXT
+ asm volatile(".arch_extension xscale\n\t"
+ "mar acc0, %Q0, %R0" : "=r" (acc0));
+#endif
+}
+
+static void pxa3xx_cpu_pm_enter(suspend_state_t state)
+{
+ /*
+ * Don't sleep if no wakeup sources are defined
+ */
+ if (wakeup_src == 0) {
+ printk(KERN_ERR "Not suspending: no wakeup sources\n");
+ return;
+ }
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2);
+ break;
+
+ case PM_SUSPEND_MEM:
+ pxa3xx_cpu_pm_suspend();
+ break;
+ }
+}
+
+static int pxa3xx_cpu_pm_valid(suspend_state_t state)
+{
+ return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
+}
+
+static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
+ .valid = pxa3xx_cpu_pm_valid,
+ .enter = pxa3xx_cpu_pm_enter,
+};
+
+static void __init pxa3xx_init_pm(void)
+{
+ sram = ioremap(ISRAM_START, ISRAM_SIZE);
+ if (!sram) {
+ printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n");
+ return;
+ }
+
+ /*
+ * Since we copy wakeup code into the SRAM, we need to ensure
+ * that it is preserved over the low power modes. Note: bit 8
+ * is undocumented in the developer manual, but must be set.
+ */
+ AD1R |= ADXR_L2 | ADXR_R0;
+ AD2R |= ADXR_L2 | ADXR_R0;
+ AD3R |= ADXR_L2 | ADXR_R0;
+
+ /*
+ * Clear the resume enable registers.
+ */
+ AD1D0ER = 0;
+ AD2D0ER = 0;
+ AD2D1ER = 0;
+ AD3ER = 0;
+
+ pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns;
+}
+
+static int pxa3xx_set_wake(struct irq_data *d, unsigned int on)
+{
+ unsigned long flags, mask = 0;
+
+ switch (d->irq) {
+ case IRQ_SSP3:
+ mask = ADXER_MFP_WSSP3;
+ break;
+ case IRQ_MSL:
+ mask = ADXER_WMSL0;
+ break;
+ case IRQ_USBH2:
+ case IRQ_USBH1:
+ mask = ADXER_WUSBH;
+ break;
+ case IRQ_KEYPAD:
+ mask = ADXER_WKP;
+ break;
+ case IRQ_AC97:
+ mask = ADXER_MFP_WAC97;
+ break;
+ case IRQ_USIM:
+ mask = ADXER_WUSIM0;
+ break;
+ case IRQ_SSP2:
+ mask = ADXER_MFP_WSSP2;
+ break;
+ case IRQ_I2C:
+ mask = ADXER_MFP_WI2C;
+ break;
+ case IRQ_STUART:
+ mask = ADXER_MFP_WUART3;
+ break;
+ case IRQ_BTUART:
+ mask = ADXER_MFP_WUART2;
+ break;
+ case IRQ_FFUART:
+ mask = ADXER_MFP_WUART1;
+ break;
+ case IRQ_MMC:
+ mask = ADXER_MFP_WMMC1;
+ break;
+ case IRQ_SSP:
+ mask = ADXER_MFP_WSSP1;
+ break;
+ case IRQ_RTCAlrm:
+ mask = ADXER_WRTC;
+ break;
+ case IRQ_SSP4:
+ mask = ADXER_MFP_WSSP4;
+ break;
+ case IRQ_TSI:
+ mask = ADXER_WTSI;
+ break;
+ case IRQ_USIM2:
+ mask = ADXER_WUSIM1;
+ break;
+ case IRQ_MMC2:
+ mask = ADXER_MFP_WMMC2;
+ break;
+ case IRQ_NAND:
+ mask = ADXER_MFP_WFLASH;
+ break;
+ case IRQ_USB2:
+ mask = ADXER_WUSB2;
+ break;
+ case IRQ_WAKEUP0:
+ mask = ADXER_WEXTWAKE0;
+ break;
+ case IRQ_WAKEUP1:
+ mask = ADXER_WEXTWAKE1;
+ break;
+ case IRQ_MMC3:
+ mask = ADXER_MFP_GEN12;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ local_irq_save(flags);
+ if (on)
+ wakeup_src |= mask;
+ else
+ wakeup_src &= ~mask;
+ local_irq_restore(flags);
+
+ return 0;
+}
+#else
+static inline void pxa3xx_init_pm(void) {}
+#define pxa3xx_set_wake NULL
+#endif
+
+static void pxa_ack_ext_wakeup(struct irq_data *d)
+{
+ PECR |= PECR_IS(d->irq - IRQ_WAKEUP0);
+}
+
+static void pxa_mask_ext_wakeup(struct irq_data *d)
+{
+ pxa_mask_irq(d);
+ PECR &= ~PECR_IE(d->irq - IRQ_WAKEUP0);
+}
+
+static void pxa_unmask_ext_wakeup(struct irq_data *d)
+{
+ pxa_unmask_irq(d);
+ PECR |= PECR_IE(d->irq - IRQ_WAKEUP0);
+}
+
+static int pxa_set_ext_wakeup_type(struct irq_data *d, unsigned int flow_type)
+{
+ if (flow_type & IRQ_TYPE_EDGE_RISING)
+ PWER |= 1 << (d->irq - IRQ_WAKEUP0);
+
+ if (flow_type & IRQ_TYPE_EDGE_FALLING)
+ PWER |= 1 << (d->irq - IRQ_WAKEUP0 + 2);
+
+ return 0;
+}
+
+static struct irq_chip pxa_ext_wakeup_chip = {
+ .name = "WAKEUP",
+ .irq_ack = pxa_ack_ext_wakeup,
+ .irq_mask = pxa_mask_ext_wakeup,
+ .irq_unmask = pxa_unmask_ext_wakeup,
+ .irq_set_type = pxa_set_ext_wakeup_type,
+};
+
+static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *,
+ unsigned int))
+{
+ int irq;
+
+ for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) {
+ irq_set_chip_and_handler(irq, &pxa_ext_wakeup_chip,
+ handle_edge_irq);
+ irq_clear_status_flags(irq, IRQ_NOREQUEST);
+ }
+
+ pxa_ext_wakeup_chip.irq_set_wake = fn;
+}
+
+static void __init __pxa3xx_init_irq(void)
+{
+ /* enable CP6 access */
+ u32 value;
+ __asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value));
+ value |= (1 << 6);
+ __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
+
+ pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
+}
+
+void __init pxa3xx_init_irq(void)
+{
+ __pxa3xx_init_irq();
+ pxa_init_irq(56, pxa3xx_set_wake);
+}
+
+#ifdef CONFIG_OF
+static int __init __init
+pxa3xx_dt_init_irq(struct device_node *node, struct device_node *parent)
+{
+ __pxa3xx_init_irq();
+ pxa_dt_irq_init(pxa3xx_set_wake);
+ set_handle_irq(ichp_handle_irq);
+
+ return 0;
+}
+IRQCHIP_DECLARE(pxa3xx_intc, "marvell,pxa-intc", pxa3xx_dt_init_irq);
+#endif /* CONFIG_OF */
+
+static struct map_desc pxa3xx_io_desc[] __initdata = {
+ { /* Mem Ctl */
+ .virtual = (unsigned long)SMEMC_VIRT,
+ .pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE),
+ .length = SMEMC_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = (unsigned long)NAND_VIRT,
+ .pfn = __phys_to_pfn(NAND_PHYS),
+ .length = NAND_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+void __init pxa3xx_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(ARRAY_AND_SIZE(pxa3xx_io_desc));
+ pxa3xx_get_clk_frequency_khz(1);
+}
+
+/*
+ * device registration specific to PXA3xx.
+ */
+
+void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+{
+ pxa_register_device(&pxa3xx_device_i2c_power, info);
+}
+
+static struct pxa_gpio_platform_data pxa3xx_gpio_pdata = {
+ .irq_base = PXA_GPIO_TO_IRQ(0),
+};
+
+static struct platform_device *devices[] __initdata = {
+ &pxa27x_device_udc,
+ &pxa_device_pmu,
+ &pxa_device_i2s,
+ &pxa_device_asoc_ssp1,
+ &pxa_device_asoc_ssp2,
+ &pxa_device_asoc_ssp3,
+ &pxa_device_asoc_ssp4,
+ &pxa_device_asoc_platform,
+ &pxa_device_rtc,
+ &pxa3xx_device_ssp1,
+ &pxa3xx_device_ssp2,
+ &pxa3xx_device_ssp3,
+ &pxa3xx_device_ssp4,
+ &pxa27x_device_pwm0,
+ &pxa27x_device_pwm1,
+};
+
+static int __init pxa3xx_init(void)
+{
+ int ret = 0;
+
+ if (cpu_is_pxa3xx()) {
+
+ reset_status = ARSR;
+
+ /*
+ * clear RDH bit every time after reset
+ *
+ * Note: the last 3 bits DxS are write-1-to-clear so carefully
+ * preserve them here in case they will be referenced later
+ */
+ ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
+
+ /*
+ * Disable DFI bus arbitration, to prevent a system bus lock if
+ * somebody disables the NAND clock (unused clock) while this
+ * bit remains set.
+ */
+ NDCR = (NDCR & ~NDCR_ND_ARB_EN) | NDCR_ND_ARB_CNTL;
+
+ pxa3xx_init_pm();
+
+ register_syscore_ops(&pxa_irq_syscore_ops);
+ register_syscore_ops(&pxa3xx_mfp_syscore_ops);
+
+ if (of_have_populated_dt())
+ return 0;
+
+ pxa2xx_set_dmac_info(32, 100);
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ if (ret)
+ return ret;
+ if (cpu_is_pxa300() || cpu_is_pxa310() || cpu_is_pxa320()) {
+ platform_device_add_data(&pxa3xx_device_gpio,
+ &pxa3xx_gpio_pdata,
+ sizeof(pxa3xx_gpio_pdata));
+ ret = platform_device_register(&pxa3xx_device_gpio);
+ }
+ }
+
+ return ret;
+}
+
+postcore_initcall(pxa3xx_init);