[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-common/entry.S b/src/kernel/linux/v4.14/arch/blackfin/mach-common/entry.S
new file mode 100644
index 0000000..8d9431e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-common/entry.S
@@ -0,0 +1,1711 @@
+/*
+ * Contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all
+ * interrupts and faults that can result in a task-switch.
+ *
+ * Copyright 2005-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/* NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/unistd.h>
+#include <asm/blackfin.h>
+#include <asm/errno.h>
+#include <asm/fixed_code.h>
+#include <asm/thread_info.h> /* TIF_NEED_RESCHED */
+#include <asm/asm-offsets.h>
+#include <asm/trace.h>
+#include <asm/traps.h>
+
+#include <asm/context.S>
+
+
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+.section .l1.text
+#else
+.text
+#endif
+
+/* Slightly simplified and streamlined entry point for CPLB misses.
+ * This one does not lower the level to IRQ5, and thus can be used to
+ * patch up CPLB misses on the kernel stack.
+ */
+#if ANOMALY_05000261
+#define _ex_dviol _ex_workaround_261
+#define _ex_dmiss _ex_workaround_261
+#define _ex_dmult _ex_workaround_261
+
+ENTRY(_ex_workaround_261)
+ /*
+ * Work around an anomaly: if we see a new DCPLB fault, return
+ * without doing anything. Then, if we get the same fault again,
+ * handle it.
+ */
+ P4 = R7; /* Store EXCAUSE */
+
+ GET_PDA(p5, r7);
+ r7 = [p5 + PDA_LFRETX];
+ r6 = retx;
+ [p5 + PDA_LFRETX] = r6;
+ cc = r6 == r7;
+ if !cc jump _bfin_return_from_exception;
+ /* fall through */
+ R7 = P4;
+ R6 = VEC_CPLB_M; /* Data CPLB Miss */
+ cc = R6 == R7;
+ if cc jump _ex_dcplb_miss (BP);
+#ifdef CONFIG_MPU
+ R6 = VEC_CPLB_VL; /* Data CPLB Violation */
+ cc = R6 == R7;
+ if cc jump _ex_dcplb_viol (BP);
+#endif
+ /* Handle Data CPLB Protection Violation
+ * and Data CPLB Multiple Hits - Linux Trap Zero
+ */
+ jump _ex_trap_c;
+ENDPROC(_ex_workaround_261)
+
+#else
+#ifdef CONFIG_MPU
+#define _ex_dviol _ex_dcplb_viol
+#else
+#define _ex_dviol _ex_trap_c
+#endif
+#define _ex_dmiss _ex_dcplb_miss
+#define _ex_dmult _ex_trap_c
+#endif
+
+
+ENTRY(_ex_dcplb_viol)
+ENTRY(_ex_dcplb_miss)
+ENTRY(_ex_icplb_miss)
+ (R7:6,P5:4) = [sp++];
+ /* We leave the previously pushed ASTAT on the stack. */
+ SAVE_CONTEXT_CPLB
+
+ /* We must load R1 here, _before_ DEBUG_HWTRACE_SAVE, since that
+ * will change the stack pointer. */
+ R0 = SEQSTAT;
+ R1 = SP;
+
+ DEBUG_HWTRACE_SAVE(p5, r7)
+
+ sp += -12;
+ call _cplb_hdr;
+ sp += 12;
+ CC = R0 == 0;
+ IF !CC JUMP _handle_bad_cplb;
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+ /* While we were processing this, did we double fault? */
+ r7 = SEQSTAT; /* reason code is in bit 5:0 */
+ r6.l = lo(SEQSTAT_EXCAUSE);
+ r6.h = hi(SEQSTAT_EXCAUSE);
+ r7 = r7 & r6;
+ r6 = 0x25;
+ CC = R7 == R6;
+ if CC JUMP _double_fault;
+#endif
+
+ DEBUG_HWTRACE_RESTORE(p5, r7)
+ RESTORE_CONTEXT_CPLB
+ ASTAT = [SP++];
+ SP = EX_SCRATCH_REG;
+ rtx;
+ENDPROC(_ex_icplb_miss)
+
+ENTRY(_ex_syscall)
+ raise 15; /* invoked by TRAP #0, for sys call */
+ jump.s _bfin_return_from_exception;
+ENDPROC(_ex_syscall)
+
+ENTRY(_ex_single_step)
+ /* If we just returned from an interrupt, the single step event is
+ for the RTI instruction. */
+ r7 = retx;
+ r6 = reti;
+ cc = r7 == r6;
+ if cc jump _bfin_return_from_exception;
+
+#ifdef CONFIG_KGDB
+ /* Don't do single step in hardware exception handler */
+ p5.l = lo(IPEND);
+ p5.h = hi(IPEND);
+ r6 = [p5];
+ cc = bittst(r6, 4);
+ if cc jump _bfin_return_from_exception;
+ cc = bittst(r6, 5);
+ if cc jump _bfin_return_from_exception;
+
+ /* skip single step if current interrupt priority is higher than
+ * that of the first instruction, from which gdb starts single step */
+ r6 >>= 6;
+ r7 = 10;
+.Lfind_priority_start:
+ cc = bittst(r6, 0);
+ if cc jump .Lfind_priority_done;
+ r6 >>= 1;
+ r7 += -1;
+ cc = r7 == 0;
+ if cc jump .Lfind_priority_done;
+ jump.s .Lfind_priority_start;
+.Lfind_priority_done:
+ p4.l = _kgdb_single_step;
+ p4.h = _kgdb_single_step;
+ r6 = [p4];
+ cc = r6 == 0;
+ if cc jump .Ldo_single_step;
+ r6 += -1;
+ cc = r6 < r7;
+ if cc jump 1f;
+.Ldo_single_step:
+#else
+ /* If we were in user mode, do the single step normally. */
+ p5.l = lo(IPEND);
+ p5.h = hi(IPEND);
+ r6 = [p5];
+ r7 = 0xffe0 (z);
+ r7 = r7 & r6;
+ cc = r7 == 0;
+ if !cc jump 1f;
+#endif
+#ifdef CONFIG_EXACT_HWERR
+ /* Read the ILAT, and to check to see if the process we are
+ * single stepping caused a previous hardware error
+ * If so, do not single step, (which lowers to IRQ5, and makes
+ * us miss the error).
+ */
+ p5.l = lo(ILAT);
+ p5.h = hi(ILAT);
+ r7 = [p5];
+ cc = bittst(r7, EVT_IVHW_P);
+ if cc jump 1f;
+#endif
+ /* Single stepping only a single instruction, so clear the trace
+ * bit here. */
+ r7 = syscfg;
+ bitclr (r7, SYSCFG_SSSTEP_P);
+ syscfg = R7;
+ jump _ex_trap_c;
+
+1:
+ /*
+ * We were in an interrupt handler. By convention, all of them save
+ * SYSCFG with their first instruction, so by checking whether our
+ * RETX points at the entry point, we can determine whether to allow
+ * a single step, or whether to clear SYSCFG.
+ *
+ * First, find out the interrupt level and the event vector for it.
+ */
+ p5.l = lo(EVT0);
+ p5.h = hi(EVT0);
+ p5 += -4;
+2:
+ r7 = rot r7 by -1;
+ p5 += 4;
+ if !cc jump 2b;
+
+ /* What we actually do is test for the _second_ instruction in the
+ * IRQ handler. That way, if there are insns following the restore
+ * of SYSCFG after leaving the handler, we will not turn off SYSCFG
+ * for them. */
+
+ r7 = [p5];
+ r7 += 2;
+ r6 = RETX;
+ cc = R7 == R6;
+ if !cc jump _bfin_return_from_exception;
+
+ r7 = syscfg;
+ bitclr (r7, SYSCFG_SSSTEP_P); /* Turn off single step */
+ syscfg = R7;
+
+ /* Fall through to _bfin_return_from_exception. */
+ENDPROC(_ex_single_step)
+
+ENTRY(_bfin_return_from_exception)
+#if ANOMALY_05000257
+ R7=LC0;
+ LC0=R7;
+ R7=LC1;
+ LC1=R7;
+#endif
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+ /* While we were processing the current exception,
+ * did we cause another, and double fault?
+ */
+ r7 = SEQSTAT; /* reason code is in bit 5:0 */
+ r6.l = lo(SEQSTAT_EXCAUSE);
+ r6.h = hi(SEQSTAT_EXCAUSE);
+ r7 = r7 & r6;
+ r6 = VEC_UNCOV;
+ CC = R7 == R6;
+ if CC JUMP _double_fault;
+#endif
+
+ (R7:6,P5:4) = [sp++];
+ ASTAT = [sp++];
+ sp = EX_SCRATCH_REG;
+ rtx;
+ENDPROC(_bfin_return_from_exception)
+
+ENTRY(_handle_bad_cplb)
+ DEBUG_HWTRACE_RESTORE(p5, r7)
+ /* To get here, we just tried and failed to change a CPLB
+ * so, handle things in trap_c (C code), by lowering to
+ * IRQ5, just like we normally do. Since this is not a
+ * "normal" return path, we have a do a lot of stuff to
+ * the stack to get ready so, we can fall through - we
+ * need to make a CPLB exception look like a normal exception
+ */
+ RESTORE_CONTEXT_CPLB
+ /* ASTAT is still on the stack, where it is needed. */
+ [--sp] = (R7:6,P5:4);
+
+ENTRY(_ex_replaceable)
+ nop;
+
+ENTRY(_ex_trap_c)
+ /* The only thing that has been saved in this context is
+ * (R7:6,P5:4), ASTAT & SP - don't use anything else
+ */
+
+ GET_PDA(p5, r6);
+
+ /* Make sure we are not in a double fault */
+ p4.l = lo(IPEND);
+ p4.h = hi(IPEND);
+ r7 = [p4];
+ CC = BITTST (r7, 5);
+ if CC jump _double_fault;
+ [p5 + PDA_EXIPEND] = r7;
+
+ /* Call C code (trap_c) to handle the exception, which most
+ * likely involves sending a signal to the current process.
+ * To avoid double faults, lower our priority to IRQ5 first.
+ */
+ r7.h = _exception_to_level5;
+ r7.l = _exception_to_level5;
+ p4.l = lo(EVT5);
+ p4.h = hi(EVT5);
+ [p4] = r7;
+ csync;
+
+ /*
+ * Save these registers, as they are only valid in exception context
+ * (where we are now - as soon as we defer to IRQ5, they can change)
+ * DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3,
+ * but they are not very interesting, so don't save them
+ */
+
+ p4.l = lo(DCPLB_FAULT_ADDR);
+ p4.h = hi(DCPLB_FAULT_ADDR);
+ r7 = [p4];
+ [p5 + PDA_DCPLB] = r7;
+
+ p4.l = lo(ICPLB_FAULT_ADDR);
+ p4.h = hi(ICPLB_FAULT_ADDR);
+ r6 = [p4];
+ [p5 + PDA_ICPLB] = r6;
+
+ r6 = retx;
+ [p5 + PDA_RETX] = r6;
+
+ r6 = SEQSTAT;
+ [p5 + PDA_SEQSTAT] = r6;
+
+ /* Save the state of single stepping */
+ r6 = SYSCFG;
+ [p5 + PDA_SYSCFG] = r6;
+ /* Clear it while we handle the exception in IRQ5 mode */
+ BITCLR(r6, SYSCFG_SSSTEP_P);
+ SYSCFG = r6;
+
+ /* Save the current IMASK, since we change in order to jump to level 5 */
+ cli r6;
+ [p5 + PDA_EXIMASK] = r6;
+
+ p4.l = lo(SAFE_USER_INSTRUCTION);
+ p4.h = hi(SAFE_USER_INSTRUCTION);
+ retx = p4;
+
+ /* Disable all interrupts, but make sure level 5 is enabled so
+ * we can switch to that level.
+ */
+ r6 = 0x3f;
+ sti r6;
+
+ /* In case interrupts are disabled IPEND[4] (global interrupt disable bit)
+ * clear it (re-enabling interrupts again) by the special sequence of pushing
+ * RETI onto the stack. This way we can lower ourselves to IVG5 even if the
+ * exception was taken after the interrupt handler was called but before it
+ * got a chance to enable global interrupts itself.
+ */
+ [--sp] = reti;
+ sp += 4;
+
+ raise 5;
+ jump.s _bfin_return_from_exception;
+ENDPROC(_ex_trap_c)
+
+/* We just realized we got an exception, while we were processing a different
+ * exception. This is a unrecoverable event, so crash.
+ * Note: this cannot be ENTRY() as we jump here with "if cc jump" ...
+ */
+ENTRY(_double_fault)
+ /* Turn caches & protection off, to ensure we don't get any more
+ * double exceptions
+ */
+
+ P4.L = LO(IMEM_CONTROL);
+ P4.H = HI(IMEM_CONTROL);
+
+ R5 = [P4]; /* Control Register*/
+ BITCLR(R5,ENICPLB_P);
+ CSYNC; /* Disabling of CPLBs should be proceeded by a CSYNC */
+ [P4] = R5;
+ SSYNC;
+
+ P4.L = LO(DMEM_CONTROL);
+ P4.H = HI(DMEM_CONTROL);
+ R5 = [P4];
+ BITCLR(R5,ENDCPLB_P);
+ CSYNC; /* Disabling of CPLBs should be proceeded by a CSYNC */
+ [P4] = R5;
+ SSYNC;
+
+ /* Fix up the stack */
+ (R7:6,P5:4) = [sp++];
+ ASTAT = [sp++];
+ SP = EX_SCRATCH_REG;
+
+ /* We should be out of the exception stack, and back down into
+ * kernel or user space stack
+ */
+ SAVE_ALL_SYS
+
+ /* The dumping functions expect the return address in the RETI
+ * slot. */
+ r6 = retx;
+ [sp + PT_PC] = r6;
+
+ r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
+ SP += -12;
+ pseudo_long_call _double_fault_c, p5;
+ SP += 12;
+.L_double_fault_panic:
+ JUMP .L_double_fault_panic
+
+ENDPROC(_double_fault)
+
+ENTRY(_exception_to_level5)
+ SAVE_ALL_SYS
+
+ GET_PDA(p5, r7); /* Fetch current PDA */
+ r6 = [p5 + PDA_RETX];
+ [sp + PT_PC] = r6;
+
+ r6 = [p5 + PDA_SYSCFG];
+ [sp + PT_SYSCFG] = r6;
+
+ r6 = [p5 + PDA_SEQSTAT]; /* Read back seqstat */
+ [sp + PT_SEQSTAT] = r6;
+
+ /* Restore the hardware error vector. */
+ r7.h = _evt_ivhw;
+ r7.l = _evt_ivhw;
+ p4.l = lo(EVT5);
+ p4.h = hi(EVT5);
+ [p4] = r7;
+ csync;
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+ /* Now that we have the hardware error vector programmed properly
+ * we can re-enable interrupts (IPEND[4]), so if the _trap_c causes
+ * another hardware error, we can catch it (self-nesting).
+ */
+ [--sp] = reti;
+ sp += 4;
+#endif
+
+ r7 = [p5 + PDA_EXIPEND] /* Read the IPEND from the Exception state */
+ [sp + PT_IPEND] = r7; /* Store IPEND onto the stack */
+
+ r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
+ SP += -12;
+ pseudo_long_call _trap_c, p4;
+ SP += 12;
+
+ /* If interrupts were off during the exception (IPEND[4] = 1), turn them off
+ * before we return.
+ */
+ CC = BITTST(r7, EVT_IRPTEN_P)
+ if !CC jump 1f;
+ /* this will load a random value into the reti register - but that is OK,
+ * since we do restore it to the correct value in the 'RESTORE_ALL_SYS' macro
+ */
+ sp += -4;
+ reti = [sp++];
+1:
+ /* restore the interrupt mask (IMASK) */
+ r6 = [p5 + PDA_EXIMASK];
+ sti r6;
+
+ call _ret_from_exception;
+ RESTORE_ALL_SYS
+ rti;
+ENDPROC(_exception_to_level5)
+
+ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
+ /* Since the kernel stack can be anywhere, it's not guaranteed to be
+ * covered by a CPLB. Switch to an exception stack; use RETN as a
+ * scratch register (for want of a better option).
+ */
+ EX_SCRATCH_REG = sp;
+ GET_PDA_SAFE(sp);
+ sp = [sp + PDA_EXSTACK];
+ /* Try to deal with syscalls quickly. */
+ [--sp] = ASTAT;
+ [--sp] = (R7:6,P5:4);
+
+ ANOMALY_283_315_WORKAROUND(p5, r7)
+
+#ifdef CONFIG_EXACT_HWERR
+ /* Make sure all pending read/writes complete. This will ensure any
+ * accesses which could cause hardware errors completes, and signal
+ * the the hardware before we do something silly, like crash the
+ * kernel. We don't need to work around anomaly 05000312, since
+ * we are already atomic
+ */
+ ssync;
+#endif
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+ /*
+ * Save these registers, as they are only valid in exception context
+ * (where we are now - as soon as we defer to IRQ5, they can change)
+ * DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3,
+ * but they are not very interesting, so don't save them
+ */
+
+ GET_PDA(p5, r7);
+ p4.l = lo(DCPLB_FAULT_ADDR);
+ p4.h = hi(DCPLB_FAULT_ADDR);
+ r7 = [p4];
+ [p5 + PDA_DF_DCPLB] = r7;
+
+ p4.l = lo(ICPLB_FAULT_ADDR);
+ p4.h = hi(ICPLB_FAULT_ADDR);
+ r7 = [p4];
+ [p5 + PDA_DF_ICPLB] = r7;
+
+ r7 = retx;
+ [p5 + PDA_DF_RETX] = r7;
+
+ r7 = SEQSTAT; /* reason code is in bit 5:0 */
+ [p5 + PDA_DF_SEQSTAT] = r7;
+#else
+ r7 = SEQSTAT; /* reason code is in bit 5:0 */
+#endif
+ r6.l = lo(SEQSTAT_EXCAUSE);
+ r6.h = hi(SEQSTAT_EXCAUSE);
+ r7 = r7 & r6;
+ p5.h = _ex_table;
+ p5.l = _ex_table;
+ p4 = r7;
+ p5 = p5 + (p4 << 2);
+ p4 = [p5];
+ jump (p4);
+
+.Lbadsys:
+ r7 = -ENOSYS; /* signextending enough */
+ [sp + PT_R0] = r7; /* return value from system call */
+ jump .Lsyscall_really_exit;
+ENDPROC(_trap)
+
+ENTRY(_system_call)
+ /* Store IPEND */
+ p2.l = lo(IPEND);
+ p2.h = hi(IPEND);
+ csync;
+ r0 = [p2];
+ [sp + PT_IPEND] = r0;
+
+ /* Store RETS for now */
+ r0 = rets;
+ [sp + PT_RESERVED] = r0;
+ /* Set the stack for the current process */
+ r7 = sp;
+ r6.l = lo(ALIGN_PAGE_MASK);
+ r6.h = hi(ALIGN_PAGE_MASK);
+ r7 = r7 & r6; /* thread_info */
+ p2 = r7;
+ p2 = [p2];
+
+ [p2+(TASK_THREAD+THREAD_KSP)] = sp;
+#ifdef CONFIG_IPIPE
+ r0 = sp;
+ SP += -12;
+ pseudo_long_call ___ipipe_syscall_root, p0;
+ SP += 12;
+ cc = r0 == 1;
+ if cc jump .Lsyscall_really_exit;
+ cc = r0 == -1;
+ if cc jump .Lresume_userspace;
+ r3 = [sp + PT_R3];
+ r4 = [sp + PT_R4];
+ p0 = [sp + PT_ORIG_P0];
+#endif /* CONFIG_IPIPE */
+
+ /* are we tracing syscalls?*/
+ r7 = sp;
+ r6.l = lo(ALIGN_PAGE_MASK);
+ r6.h = hi(ALIGN_PAGE_MASK);
+ r7 = r7 & r6;
+ p2 = r7;
+ r7 = [p2+TI_FLAGS];
+ CC = BITTST(r7,TIF_SYSCALL_TRACE);
+ if CC JUMP _sys_trace;
+ CC = BITTST(r7,TIF_SINGLESTEP);
+ if CC JUMP _sys_trace;
+
+ /* Make sure the system call # is valid */
+ p4 = __NR_syscall;
+ /* System call number is passed in P0 */
+ cc = p4 <= p0;
+ if cc jump .Lbadsys;
+
+ /* Execute the appropriate system call */
+
+ p4 = p0;
+ p5.l = _sys_call_table;
+ p5.h = _sys_call_table;
+ p5 = p5 + (p4 << 2);
+ r0 = [sp + PT_R0];
+ r1 = [sp + PT_R1];
+ r2 = [sp + PT_R2];
+ p5 = [p5];
+
+ [--sp] = r5;
+ [--sp] = r4;
+ [--sp] = r3;
+ SP += -12;
+ call (p5);
+ SP += 24;
+ [sp + PT_R0] = r0;
+
+.Lresume_userspace:
+ r7 = sp;
+ r4.l = lo(ALIGN_PAGE_MASK);
+ r4.h = hi(ALIGN_PAGE_MASK);
+ r7 = r7 & r4; /* thread_info->flags */
+ p5 = r7;
+.Lresume_userspace_1:
+ /* Disable interrupts. */
+ [--sp] = reti;
+ reti = [sp++];
+
+ r7 = [p5 + TI_FLAGS];
+ r4.l = lo(_TIF_WORK_MASK);
+ r4.h = hi(_TIF_WORK_MASK);
+ r7 = r7 & r4;
+
+.Lsyscall_resched:
+#ifdef CONFIG_IPIPE
+ cc = BITTST(r7, TIF_IRQ_SYNC);
+ if !cc jump .Lsyscall_no_irqsync;
+ /*
+ * Clear IPEND[4] manually to undo what resume_userspace_1 just did;
+ * we need this so that high priority domain interrupts may still
+ * preempt the current domain while the pipeline log is being played
+ * back.
+ */
+ [--sp] = reti;
+ SP += 4; /* don't merge with next insn to keep the pattern obvious */
+ SP += -12;
+ pseudo_long_call ___ipipe_sync_root, p4;
+ SP += 12;
+ jump .Lresume_userspace_1;
+.Lsyscall_no_irqsync:
+#endif
+ cc = BITTST(r7, TIF_NEED_RESCHED);
+ if !cc jump .Lsyscall_sigpending;
+
+ /* Reenable interrupts. */
+ [--sp] = reti;
+ sp += 4;
+
+ SP += -12;
+ pseudo_long_call _schedule, p4;
+ SP += 12;
+
+ jump .Lresume_userspace_1;
+
+.Lsyscall_sigpending:
+ cc = BITTST(r7, TIF_SIGPENDING);
+ if cc jump .Lsyscall_do_signals;
+ cc = BITTST(r7, TIF_NOTIFY_RESUME);
+ if !cc jump .Lsyscall_really_exit;
+.Lsyscall_do_signals:
+ /* Reenable interrupts. */
+ [--sp] = reti;
+ sp += 4;
+
+ r0 = sp;
+ SP += -12;
+ pseudo_long_call _do_notify_resume, p5;
+ SP += 12;
+
+.Lsyscall_really_exit:
+ r5 = [sp + PT_RESERVED];
+ rets = r5;
+ rts;
+ENDPROC(_system_call)
+
+/* Do not mark as ENTRY() to avoid error in assembler ...
+ * this symbol need not be global anyways, so ...
+ */
+_sys_trace:
+ r0 = sp;
+ pseudo_long_call _syscall_trace_enter, p5;
+
+ /* Make sure the system call # is valid */
+ p4 = [SP + PT_P0];
+ p3 = __NR_syscall;
+ cc = p3 <= p4;
+ r0 = -ENOSYS;
+ if cc jump .Lsys_trace_badsys;
+
+ /* Execute the appropriate system call */
+ p5.l = _sys_call_table;
+ p5.h = _sys_call_table;
+ p5 = p5 + (p4 << 2);
+ r0 = [sp + PT_R0];
+ r1 = [sp + PT_R1];
+ r2 = [sp + PT_R2];
+ r3 = [sp + PT_R3];
+ r4 = [sp + PT_R4];
+ r5 = [sp + PT_R5];
+ p5 = [p5];
+
+ [--sp] = r5;
+ [--sp] = r4;
+ [--sp] = r3;
+ SP += -12;
+ call (p5);
+ SP += 24;
+.Lsys_trace_badsys:
+ [sp + PT_R0] = r0;
+
+ r0 = sp;
+ pseudo_long_call _syscall_trace_leave, p5;
+ jump .Lresume_userspace;
+ENDPROC(_sys_trace)
+
+ENTRY(_resume)
+ /*
+ * Beware - when entering resume, prev (the current task) is
+ * in r0, next (the new task) is in r1.
+ */
+ p0 = r0;
+ p1 = r1;
+ [--sp] = rets;
+ [--sp] = fp;
+ [--sp] = (r7:4, p5:3);
+
+ /* save usp */
+ p2 = usp;
+ [p0+(TASK_THREAD+THREAD_USP)] = p2;
+
+ /* save current kernel stack pointer */
+ [p0+(TASK_THREAD+THREAD_KSP)] = sp;
+
+ /* save program counter */
+ r1.l = _new_old_task;
+ r1.h = _new_old_task;
+ [p0+(TASK_THREAD+THREAD_PC)] = r1;
+
+ /* restore the kernel stack pointer */
+ sp = [p1+(TASK_THREAD+THREAD_KSP)];
+
+ /* restore user stack pointer */
+ p0 = [p1+(TASK_THREAD+THREAD_USP)];
+ usp = p0;
+
+ /* restore pc */
+ p0 = [p1+(TASK_THREAD+THREAD_PC)];
+ jump (p0);
+
+ /*
+ * Following code actually lands up in a new (old) task.
+ */
+
+_new_old_task:
+ (r7:4, p5:3) = [sp++];
+ fp = [sp++];
+ rets = [sp++];
+
+ /*
+ * When we come out of resume, r0 carries "old" task, because we are
+ * in "new" task.
+ */
+ rts;
+ENDPROC(_resume)
+
+ENTRY(_ret_from_exception)
+#ifdef CONFIG_IPIPE
+ p2.l = _ipipe_percpu_domain;
+ p2.h = _ipipe_percpu_domain;
+ r0.l = _ipipe_root;
+ r0.h = _ipipe_root;
+ r2 = [p2];
+ cc = r0 == r2;
+ if !cc jump 4f; /* not on behalf of the root domain, get out */
+#endif /* CONFIG_IPIPE */
+ p2.l = lo(IPEND);
+ p2.h = hi(IPEND);
+
+ csync;
+ r0 = [p2];
+ [sp + PT_IPEND] = r0;
+
+1:
+ r2 = LO(~0x37) (Z);
+ r0 = r2 & r0;
+ cc = r0 == 0;
+ if !cc jump 4f; /* if not return to user mode, get out */
+
+ /* Make sure any pending system call or deferred exception
+ * return in ILAT for this process to get executed, otherwise
+ * in case context switch happens, system call of
+ * first process (i.e in ILAT) will be carried
+ * forward to the switched process
+ */
+
+ p2.l = lo(ILAT);
+ p2.h = hi(ILAT);
+ r0 = [p2];
+ r1 = (EVT_IVG14 | EVT_IVG15) (z);
+ r0 = r0 & r1;
+ cc = r0 == 0;
+ if !cc jump 5f;
+
+ /* Set the stack for the current process */
+ r7 = sp;
+ r4.l = lo(ALIGN_PAGE_MASK);
+ r4.h = hi(ALIGN_PAGE_MASK);
+ r7 = r7 & r4; /* thread_info->flags */
+ p5 = r7;
+ r7 = [p5 + TI_FLAGS];
+ r4.l = lo(_TIF_WORK_MASK);
+ r4.h = hi(_TIF_WORK_MASK);
+ r7 = r7 & r4;
+ cc = r7 == 0;
+ if cc jump 4f;
+
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _schedule_and_signal;
+ p1.h = _schedule_and_signal;
+ [p0] = p1;
+ csync;
+ raise 15; /* raise evt15 to do signal or reschedule */
+4:
+ r0 = syscfg;
+ bitclr(r0, SYSCFG_SSSTEP_P); /* Turn off single step */
+ syscfg = r0;
+5:
+ rts;
+ENDPROC(_ret_from_exception)
+
+#if defined(CONFIG_PREEMPT)
+
+ENTRY(_up_to_irq14)
+#if ANOMALY_05000281 || ANOMALY_05000461
+ r0.l = lo(SAFE_USER_INSTRUCTION);
+ r0.h = hi(SAFE_USER_INSTRUCTION);
+ reti = r0;
+#endif
+
+#ifdef CONFIG_DEBUG_HWERR
+ /* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */
+ r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#else
+ /* Only enable irq14 interrupt, until we transition to _evt_evt14 */
+ r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#endif
+ sti r0;
+
+ p0.l = lo(EVT14);
+ p0.h = hi(EVT14);
+ p1.l = _evt_up_evt14;
+ p1.h = _evt_up_evt14;
+ [p0] = p1;
+ csync;
+
+ raise 14;
+1:
+ jump 1b;
+ENDPROC(_up_to_irq14)
+
+ENTRY(_evt_up_evt14)
+#ifdef CONFIG_DEBUG_HWERR
+ r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+ sti r0;
+#else
+ cli r0;
+#endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+ [--sp] = rets;
+ sp += -12;
+ call _trace_hardirqs_off;
+ sp += 12;
+ rets = [sp++];
+#endif
+ [--sp] = RETI;
+ SP += 4;
+
+ /* restore normal evt14 */
+ p0.l = lo(EVT14);
+ p0.h = hi(EVT14);
+ p1.l = _evt_evt14;
+ p1.h = _evt_evt14;
+ [p0] = p1;
+ csync;
+
+ rts;
+ENDPROC(_evt_up_evt14)
+
+#endif
+
+#ifdef CONFIG_IPIPE
+
+_resume_kernel_from_int:
+ r1 = LO(~0x8000) (Z);
+ r1 = r0 & r1;
+ r0 = 1;
+ r0 = r1 - r0;
+ r2 = r1 & r0;
+ cc = r2 == 0;
+ /* Sync the root stage only from the outer interrupt level. */
+ if !cc jump .Lnosync;
+ r0.l = ___ipipe_sync_root;
+ r0.h = ___ipipe_sync_root;
+ [--sp] = reti;
+ [--sp] = rets;
+ [--sp] = ( r7:4, p5:3 );
+ SP += -12;
+ call ___ipipe_call_irqtail
+ SP += 12;
+ ( r7:4, p5:3 ) = [sp++];
+ rets = [sp++];
+ reti = [sp++];
+.Lnosync:
+ rts
+#elif defined(CONFIG_PREEMPT)
+
+_resume_kernel_from_int:
+ /* check preempt_count */
+ r7 = sp;
+ r4.l = lo(ALIGN_PAGE_MASK);
+ r4.h = hi(ALIGN_PAGE_MASK);
+ r7 = r7 & r4;
+ p5 = r7;
+ r7 = [p5 + TI_PREEMPT];
+ cc = r7 == 0x0;
+ if !cc jump .Lreturn_to_kernel;
+.Lneed_schedule:
+ r7 = [p5 + TI_FLAGS];
+ r4.l = lo(_TIF_WORK_MASK);
+ r4.h = hi(_TIF_WORK_MASK);
+ r7 = r7 & r4;
+ cc = BITTST(r7, TIF_NEED_RESCHED);
+ if !cc jump .Lreturn_to_kernel;
+ /*
+ * let schedule done at level 15, otherwise sheduled process will run
+ * at high level and block low level interrupt
+ */
+ r6 = reti; /* save reti */
+ r5.l = .Lkernel_schedule;
+ r5.h = .Lkernel_schedule;
+ reti = r5;
+ rti;
+.Lkernel_schedule:
+ [--sp] = rets;
+ sp += -12;
+ pseudo_long_call _preempt_schedule_irq, p4;
+ sp += 12;
+ rets = [sp++];
+
+ [--sp] = rets;
+ sp += -12;
+ /* up to irq14 so that reti after restore_all can return to irq15(kernel) */
+ pseudo_long_call _up_to_irq14, p4;
+ sp += 12;
+ rets = [sp++];
+
+ reti = r6; /* restore reti so that origin process can return to interrupted point */
+
+ jump .Lneed_schedule;
+#else
+
+#define _resume_kernel_from_int .Lreturn_to_kernel
+#endif
+
+ENTRY(_return_from_int)
+ /* If someone else already raised IRQ 15, do nothing. */
+ csync;
+ p2.l = lo(ILAT);
+ p2.h = hi(ILAT);
+ r0 = [p2];
+ cc = bittst (r0, EVT_IVG15_P);
+ if cc jump .Lreturn_to_kernel;
+
+ /* if not return to user mode, get out */
+ p2.l = lo(IPEND);
+ p2.h = hi(IPEND);
+ r0 = [p2];
+ r1 = 0x17(Z);
+ r2 = ~r1;
+ r2.h = 0;
+ r0 = r2 & r0;
+ r1 = 1;
+ r1 = r0 - r1;
+ r2 = r0 & r1;
+ cc = r2 == 0;
+ if !cc jump _resume_kernel_from_int;
+
+ /* Lower the interrupt level to 15. */
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _schedule_and_signal_from_int;
+ p1.h = _schedule_and_signal_from_int;
+ [p0] = p1;
+ csync;
+#if ANOMALY_05000281 || ANOMALY_05000461
+ r0.l = lo(SAFE_USER_INSTRUCTION);
+ r0.h = hi(SAFE_USER_INSTRUCTION);
+ reti = r0;
+#endif
+ r0 = 0x801f (z);
+ STI r0;
+ raise 15; /* raise evt15 to do signal or reschedule */
+ rti;
+.Lreturn_to_kernel:
+ rts;
+ENDPROC(_return_from_int)
+
+ENTRY(_lower_to_irq14)
+#if ANOMALY_05000281 || ANOMALY_05000461
+ r0.l = lo(SAFE_USER_INSTRUCTION);
+ r0.h = hi(SAFE_USER_INSTRUCTION);
+ reti = r0;
+#endif
+
+#ifdef CONFIG_DEBUG_HWERR
+ /* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */
+ r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#else
+ /* Only enable irq14 interrupt, until we transition to _evt_evt14 */
+ r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#endif
+ sti r0;
+ raise 14;
+ rti;
+ENDPROC(_lower_to_irq14)
+
+ENTRY(_evt_evt14)
+#ifdef CONFIG_DEBUG_HWERR
+ r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+ sti r0;
+#else
+ cli r0;
+#endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+ [--sp] = rets;
+ sp += -12;
+ call _trace_hardirqs_off;
+ sp += 12;
+ rets = [sp++];
+#endif
+ [--sp] = RETI;
+ SP += 4;
+ rts;
+ENDPROC(_evt_evt14)
+
+ENTRY(_schedule_and_signal_from_int)
+ /* To end up here, vector 15 was changed - so we have to change it
+ * back.
+ */
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _evt_system_call;
+ p1.h = _evt_system_call;
+ [p0] = p1;
+ csync;
+
+ /* Set orig_p0 to -1 to indicate this isn't the end of a syscall. */
+ r0 = -1 (x);
+ [sp + PT_ORIG_P0] = r0;
+
+ p1 = rets;
+ [sp + PT_RESERVED] = p1;
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* trace_hardirqs_on() checks if all irqs are disabled. But here IRQ 15
+ * is turned on, so disable all irqs. */
+ cli r0;
+ sp += -12;
+ call _trace_hardirqs_on;
+ sp += 12;
+#endif
+#ifdef CONFIG_SMP
+ GET_PDA(p0, r0); /* Fetch current PDA (can't migrate to other CPU here) */
+ r0 = [p0 + PDA_IRQFLAGS];
+#else
+ p0.l = _bfin_irq_flags;
+ p0.h = _bfin_irq_flags;
+ r0 = [p0];
+#endif
+ sti r0;
+
+ /* finish the userspace "atomic" functions for it */
+ r1.l = lo(FIXED_CODE_END);
+ r1.h = hi(FIXED_CODE_END);
+ r2 = [sp + PT_PC];
+ cc = r1 <= r2;
+ if cc jump .Lresume_userspace (bp);
+
+ r0 = sp;
+ sp += -12;
+
+ pseudo_long_call _finish_atomic_sections, p5;
+ sp += 12;
+ jump.s .Lresume_userspace;
+ENDPROC(_schedule_and_signal_from_int)
+
+ENTRY(_schedule_and_signal)
+ SAVE_CONTEXT_SYSCALL
+ /* To end up here, vector 15 was changed - so we have to change it
+ * back.
+ */
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _evt_system_call;
+ p1.h = _evt_system_call;
+ [p0] = p1;
+ csync;
+ p0.l = 1f;
+ p0.h = 1f;
+ [sp + PT_RESERVED] = P0;
+ call .Lresume_userspace;
+1:
+ RESTORE_CONTEXT
+ rti;
+ENDPROC(_schedule_and_signal)
+
+/* We handle this 100% in exception space - to reduce overhead
+ * Only potiential problem is if the software buffer gets swapped out of the
+ * CPLB table - then double fault. - so we don't let this happen in other places
+ */
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ENTRY(_ex_trace_buff_full)
+ [--sp] = P3;
+ [--sp] = P2;
+ [--sp] = LC0;
+ [--sp] = LT0;
+ [--sp] = LB0;
+ P5.L = _trace_buff_offset;
+ P5.H = _trace_buff_offset;
+ P3 = [P5]; /* trace_buff_offset */
+ P5.L = lo(TBUFSTAT);
+ P5.H = hi(TBUFSTAT);
+ R7 = [P5];
+ R7 <<= 1; /* double, since we need to read twice */
+ LC0 = R7;
+ R7 <<= 2; /* need to shift over again,
+ * to get the number of bytes */
+ P5.L = lo(TBUF);
+ P5.H = hi(TBUF);
+ R6 = ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*1024) - 1;
+
+ P2 = R7;
+ P3 = P3 + P2;
+ R7 = P3;
+ R7 = R7 & R6;
+ P3 = R7;
+ P2.L = _trace_buff_offset;
+ P2.H = _trace_buff_offset;
+ [P2] = P3;
+
+ P2.L = _software_trace_buff;
+ P2.H = _software_trace_buff;
+
+ LSETUP (.Lstart, .Lend) LC0;
+.Lstart:
+ R7 = [P5]; /* read TBUF */
+ P4 = P3 + P2;
+ [P4] = R7;
+ P3 += -4;
+ R7 = P3;
+ R7 = R7 & R6;
+.Lend:
+ P3 = R7;
+
+ LB0 = [sp++];
+ LT0 = [sp++];
+ LC0 = [sp++];
+ P2 = [sp++];
+ P3 = [sp++];
+ jump _bfin_return_from_exception;
+ENDPROC(_ex_trace_buff_full)
+
+#if CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN == 4
+.data
+#else
+.section .l1.data.B
+#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN */
+ENTRY(_trace_buff_offset)
+ .long 0;
+ALIGN
+ENTRY(_software_trace_buff)
+ .rept ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*256);
+ .long 0
+ .endr
+#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */
+
+#ifdef CONFIG_EARLY_PRINTK
+__INIT
+ENTRY(_early_trap)
+ SAVE_ALL_SYS
+ trace_buffer_stop(p0,r0);
+
+ ANOMALY_283_315_WORKAROUND(p4, r5)
+
+ /* Turn caches off, to ensure we don't get double exceptions */
+
+ P4.L = LO(IMEM_CONTROL);
+ P4.H = HI(IMEM_CONTROL);
+
+ R5 = [P4]; /* Control Register*/
+ BITCLR(R5,ENICPLB_P);
+ CSYNC; /* Disabling of CPLBs should be proceeded by a CSYNC */
+ [P4] = R5;
+ SSYNC;
+
+ P4.L = LO(DMEM_CONTROL);
+ P4.H = HI(DMEM_CONTROL);
+ R5 = [P4];
+ BITCLR(R5,ENDCPLB_P);
+ CSYNC; /* Disabling of CPLBs should be proceeded by a CSYNC */
+ [P4] = R5;
+ SSYNC;
+
+ r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
+ r1 = RETX;
+
+ SP += -12;
+ call _early_trap_c;
+ SP += 12;
+ENDPROC(_early_trap)
+__FINIT
+#endif /* CONFIG_EARLY_PRINTK */
+
+/*
+ * Put these in the kernel data section - that should always be covered by
+ * a CPLB. This is needed to ensure we don't get double fault conditions
+ */
+
+#ifdef CONFIG_SYSCALL_TAB_L1
+.section .l1.data
+#else
+.data
+#endif
+
+ENTRY(_ex_table)
+ /* entry for each EXCAUSE[5:0]
+ * This table must be in sync with the table in ./kernel/traps.c
+ * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
+ */
+ .long _ex_syscall /* 0x00 - User Defined - Linux Syscall */
+ .long _ex_trap_c /* 0x01 - User Defined - Software breakpoint */
+#ifdef CONFIG_KGDB
+ .long _ex_trap_c /* 0x02 - User Defined - KGDB initial connection
+ and break signal trap */
+#else
+ .long _ex_replaceable /* 0x02 - User Defined */
+#endif
+ .long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */
+ .long _ex_trap_c /* 0x04 - User Defined - dump trace buffer */
+ .long _ex_replaceable /* 0x05 - User Defined */
+ .long _ex_replaceable /* 0x06 - User Defined */
+ .long _ex_replaceable /* 0x07 - User Defined */
+ .long _ex_replaceable /* 0x08 - User Defined */
+ .long _ex_replaceable /* 0x09 - User Defined */
+ .long _ex_replaceable /* 0x0A - User Defined */
+ .long _ex_replaceable /* 0x0B - User Defined */
+ .long _ex_replaceable /* 0x0C - User Defined */
+ .long _ex_replaceable /* 0x0D - User Defined */
+ .long _ex_replaceable /* 0x0E - User Defined */
+ .long _ex_replaceable /* 0x0F - User Defined */
+ .long _ex_single_step /* 0x10 - HW Single step */
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ .long _ex_trace_buff_full /* 0x11 - Trace Buffer Full */
+#else
+ .long _ex_trap_c /* 0x11 - Trace Buffer Full */
+#endif
+ .long _ex_trap_c /* 0x12 - Reserved */
+ .long _ex_trap_c /* 0x13 - Reserved */
+ .long _ex_trap_c /* 0x14 - Reserved */
+ .long _ex_trap_c /* 0x15 - Reserved */
+ .long _ex_trap_c /* 0x16 - Reserved */
+ .long _ex_trap_c /* 0x17 - Reserved */
+ .long _ex_trap_c /* 0x18 - Reserved */
+ .long _ex_trap_c /* 0x19 - Reserved */
+ .long _ex_trap_c /* 0x1A - Reserved */
+ .long _ex_trap_c /* 0x1B - Reserved */
+ .long _ex_trap_c /* 0x1C - Reserved */
+ .long _ex_trap_c /* 0x1D - Reserved */
+ .long _ex_trap_c /* 0x1E - Reserved */
+ .long _ex_trap_c /* 0x1F - Reserved */
+ .long _ex_trap_c /* 0x20 - Reserved */
+ .long _ex_trap_c /* 0x21 - Undefined Instruction */
+ .long _ex_trap_c /* 0x22 - Illegal Instruction Combination */
+ .long _ex_dviol /* 0x23 - Data CPLB Protection Violation */
+ .long _ex_trap_c /* 0x24 - Data access misaligned */
+ .long _ex_trap_c /* 0x25 - Unrecoverable Event */
+ .long _ex_dmiss /* 0x26 - Data CPLB Miss */
+ .long _ex_dmult /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero */
+ .long _ex_trap_c /* 0x28 - Emulation Watchpoint */
+ .long _ex_trap_c /* 0x29 - Instruction fetch access error (535 only) */
+ .long _ex_trap_c /* 0x2A - Instruction fetch misaligned */
+ .long _ex_trap_c /* 0x2B - Instruction CPLB protection Violation */
+ .long _ex_icplb_miss /* 0x2C - Instruction CPLB miss */
+ .long _ex_trap_c /* 0x2D - Instruction CPLB Multiple Hits */
+ .long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */
+ .long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */
+ .long _ex_trap_c /* 0x2F - Reserved */
+ .long _ex_trap_c /* 0x30 - Reserved */
+ .long _ex_trap_c /* 0x31 - Reserved */
+ .long _ex_trap_c /* 0x32 - Reserved */
+ .long _ex_trap_c /* 0x33 - Reserved */
+ .long _ex_trap_c /* 0x34 - Reserved */
+ .long _ex_trap_c /* 0x35 - Reserved */
+ .long _ex_trap_c /* 0x36 - Reserved */
+ .long _ex_trap_c /* 0x37 - Reserved */
+ .long _ex_trap_c /* 0x38 - Reserved */
+ .long _ex_trap_c /* 0x39 - Reserved */
+ .long _ex_trap_c /* 0x3A - Reserved */
+ .long _ex_trap_c /* 0x3B - Reserved */
+ .long _ex_trap_c /* 0x3C - Reserved */
+ .long _ex_trap_c /* 0x3D - Reserved */
+ .long _ex_trap_c /* 0x3E - Reserved */
+ .long _ex_trap_c /* 0x3F - Reserved */
+END(_ex_table)
+
+ENTRY(_sys_call_table)
+ .long _sys_restart_syscall /* 0 */
+ .long _sys_exit
+ .long _sys_ni_syscall /* fork */
+ .long _sys_read
+ .long _sys_write
+ .long _sys_open /* 5 */
+ .long _sys_close
+ .long _sys_ni_syscall /* old waitpid */
+ .long _sys_creat
+ .long _sys_link
+ .long _sys_unlink /* 10 */
+ .long _sys_execve
+ .long _sys_chdir
+ .long _sys_time
+ .long _sys_mknod
+ .long _sys_chmod /* 15 */
+ .long _sys_chown /* chown16 */
+ .long _sys_ni_syscall /* old break syscall holder */
+ .long _sys_ni_syscall /* old stat */
+ .long _sys_lseek
+ .long _sys_getpid /* 20 */
+ .long _sys_mount
+ .long _sys_ni_syscall /* old umount */
+ .long _sys_setuid
+ .long _sys_getuid
+ .long _sys_stime /* 25 */
+ .long _sys_ptrace
+ .long _sys_alarm
+ .long _sys_ni_syscall /* old fstat */
+ .long _sys_pause
+ .long _sys_ni_syscall /* old utime */ /* 30 */
+ .long _sys_ni_syscall /* old stty syscall holder */
+ .long _sys_ni_syscall /* old gtty syscall holder */
+ .long _sys_access
+ .long _sys_nice
+ .long _sys_ni_syscall /* 35 */ /* old ftime syscall holder */
+ .long _sys_sync
+ .long _sys_kill
+ .long _sys_rename
+ .long _sys_mkdir
+ .long _sys_rmdir /* 40 */
+ .long _sys_dup
+ .long _sys_pipe
+ .long _sys_times
+ .long _sys_ni_syscall /* old prof syscall holder */
+ .long _sys_brk /* 45 */
+ .long _sys_setgid
+ .long _sys_getgid
+ .long _sys_ni_syscall /* old sys_signal */
+ .long _sys_geteuid /* geteuid16 */
+ .long _sys_getegid /* getegid16 */ /* 50 */
+ .long _sys_acct
+ .long _sys_umount /* recycled never used phys() */
+ .long _sys_ni_syscall /* old lock syscall holder */
+ .long _sys_ioctl
+ .long _sys_fcntl /* 55 */
+ .long _sys_ni_syscall /* old mpx syscall holder */
+ .long _sys_setpgid
+ .long _sys_ni_syscall /* old ulimit syscall holder */
+ .long _sys_ni_syscall /* old old uname */
+ .long _sys_umask /* 60 */
+ .long _sys_chroot
+ .long _sys_ustat
+ .long _sys_dup2
+ .long _sys_getppid
+ .long _sys_getpgrp /* 65 */
+ .long _sys_setsid
+ .long _sys_ni_syscall /* old sys_sigaction */
+ .long _sys_sgetmask
+ .long _sys_ssetmask
+ .long _sys_setreuid /* setreuid16 */ /* 70 */
+ .long _sys_setregid /* setregid16 */
+ .long _sys_ni_syscall /* old sys_sigsuspend */
+ .long _sys_ni_syscall /* old sys_sigpending */
+ .long _sys_sethostname
+ .long _sys_setrlimit /* 75 */
+ .long _sys_ni_syscall /* old getrlimit */
+ .long _sys_getrusage
+ .long _sys_gettimeofday
+ .long _sys_settimeofday
+ .long _sys_getgroups /* getgroups16 */ /* 80 */
+ .long _sys_setgroups /* setgroups16 */
+ .long _sys_ni_syscall /* old_select */
+ .long _sys_symlink
+ .long _sys_ni_syscall /* old lstat */
+ .long _sys_readlink /* 85 */
+ .long _sys_uselib
+ .long _sys_ni_syscall /* sys_swapon */
+ .long _sys_reboot
+ .long _sys_ni_syscall /* old_readdir */
+ .long _sys_ni_syscall /* sys_mmap */ /* 90 */
+ .long _sys_munmap
+ .long _sys_truncate
+ .long _sys_ftruncate
+ .long _sys_fchmod
+ .long _sys_fchown /* fchown16 */ /* 95 */
+ .long _sys_getpriority
+ .long _sys_setpriority
+ .long _sys_ni_syscall /* old profil syscall holder */
+ .long _sys_statfs
+ .long _sys_fstatfs /* 100 */
+ .long _sys_ni_syscall
+ .long _sys_ni_syscall /* old sys_socketcall */
+ .long _sys_syslog
+ .long _sys_setitimer
+ .long _sys_getitimer /* 105 */
+ .long _sys_newstat
+ .long _sys_newlstat
+ .long _sys_newfstat
+ .long _sys_ni_syscall /* old uname */
+ .long _sys_ni_syscall /* iopl for i386 */ /* 110 */
+ .long _sys_vhangup
+ .long _sys_ni_syscall /* obsolete idle() syscall */
+ .long _sys_ni_syscall /* vm86old for i386 */
+ .long _sys_wait4
+ .long _sys_ni_syscall /* 115 */ /* sys_swapoff */
+ .long _sys_sysinfo
+ .long _sys_ni_syscall /* old sys_ipc */
+ .long _sys_fsync
+ .long _sys_ni_syscall /* old sys_sigreturn */
+ .long _bfin_clone /* 120 */
+ .long _sys_setdomainname
+ .long _sys_newuname
+ .long _sys_ni_syscall /* old sys_modify_ldt */
+ .long _sys_adjtimex
+ .long _sys_mprotect /* 125 */
+ .long _sys_ni_syscall /* old sys_sigprocmask */
+ .long _sys_ni_syscall /* old "creat_module" */
+ .long _sys_init_module
+ .long _sys_delete_module
+ .long _sys_ni_syscall /* 130: old "get_kernel_syms" */
+ .long _sys_quotactl
+ .long _sys_getpgid
+ .long _sys_fchdir
+ .long _sys_bdflush
+ .long _sys_ni_syscall /* 135 */ /* sys_sysfs */
+ .long _sys_personality
+ .long _sys_ni_syscall /* for afs_syscall */
+ .long _sys_setfsuid /* setfsuid16 */
+ .long _sys_setfsgid /* setfsgid16 */
+ .long _sys_llseek /* 140 */
+ .long _sys_getdents
+ .long _sys_ni_syscall /* sys_select */
+ .long _sys_flock
+ .long _sys_msync
+ .long _sys_readv /* 145 */
+ .long _sys_writev
+ .long _sys_getsid
+ .long _sys_fdatasync
+ .long _sys_sysctl
+ .long _sys_mlock /* 150 */
+ .long _sys_munlock
+ .long _sys_mlockall
+ .long _sys_munlockall
+ .long _sys_sched_setparam
+ .long _sys_sched_getparam /* 155 */
+ .long _sys_sched_setscheduler
+ .long _sys_sched_getscheduler
+ .long _sys_sched_yield
+ .long _sys_sched_get_priority_max
+ .long _sys_sched_get_priority_min /* 160 */
+ .long _sys_sched_rr_get_interval
+ .long _sys_nanosleep
+ .long _sys_mremap
+ .long _sys_setresuid /* setresuid16 */
+ .long _sys_getresuid /* getresuid16 */ /* 165 */
+ .long _sys_ni_syscall /* for vm86 */
+ .long _sys_ni_syscall /* old "query_module" */
+ .long _sys_ni_syscall /* sys_poll */
+ .long _sys_ni_syscall /* old nfsservctl */
+ .long _sys_setresgid /* setresgid16 */ /* 170 */
+ .long _sys_getresgid /* getresgid16 */
+ .long _sys_prctl
+ .long _sys_rt_sigreturn
+ .long _sys_rt_sigaction
+ .long _sys_rt_sigprocmask /* 175 */
+ .long _sys_rt_sigpending
+ .long _sys_rt_sigtimedwait
+ .long _sys_rt_sigqueueinfo
+ .long _sys_rt_sigsuspend
+ .long _sys_pread64 /* 180 */
+ .long _sys_pwrite64
+ .long _sys_lchown /* lchown16 */
+ .long _sys_getcwd
+ .long _sys_capget
+ .long _sys_capset /* 185 */
+ .long _sys_sigaltstack
+ .long _sys_sendfile
+ .long _sys_ni_syscall /* streams1 */
+ .long _sys_ni_syscall /* streams2 */
+ .long _sys_vfork /* 190 */
+ .long _sys_getrlimit
+ .long _sys_mmap_pgoff
+ .long _sys_truncate64
+ .long _sys_ftruncate64
+ .long _sys_stat64 /* 195 */
+ .long _sys_lstat64
+ .long _sys_fstat64
+ .long _sys_chown
+ .long _sys_getuid
+ .long _sys_getgid /* 200 */
+ .long _sys_geteuid
+ .long _sys_getegid
+ .long _sys_setreuid
+ .long _sys_setregid
+ .long _sys_getgroups /* 205 */
+ .long _sys_setgroups
+ .long _sys_fchown
+ .long _sys_setresuid
+ .long _sys_getresuid
+ .long _sys_setresgid /* 210 */
+ .long _sys_getresgid
+ .long _sys_lchown
+ .long _sys_setuid
+ .long _sys_setgid
+ .long _sys_setfsuid /* 215 */
+ .long _sys_setfsgid
+ .long _sys_pivot_root
+ .long _sys_mincore
+ .long _sys_madvise
+ .long _sys_getdents64 /* 220 */
+ .long _sys_fcntl64
+ .long _sys_ni_syscall /* reserved for TUX */
+ .long _sys_ni_syscall
+ .long _sys_gettid
+ .long _sys_readahead /* 225 */
+ .long _sys_setxattr
+ .long _sys_lsetxattr
+ .long _sys_fsetxattr
+ .long _sys_getxattr
+ .long _sys_lgetxattr /* 230 */
+ .long _sys_fgetxattr
+ .long _sys_listxattr
+ .long _sys_llistxattr
+ .long _sys_flistxattr
+ .long _sys_removexattr /* 235 */
+ .long _sys_lremovexattr
+ .long _sys_fremovexattr
+ .long _sys_tkill
+ .long _sys_sendfile64
+ .long _sys_futex /* 240 */
+ .long _sys_sched_setaffinity
+ .long _sys_sched_getaffinity
+ .long _sys_ni_syscall /* sys_set_thread_area */
+ .long _sys_ni_syscall /* sys_get_thread_area */
+ .long _sys_io_setup /* 245 */
+ .long _sys_io_destroy
+ .long _sys_io_getevents
+ .long _sys_io_submit
+ .long _sys_io_cancel
+ .long _sys_ni_syscall /* 250 */ /* sys_alloc_hugepages */
+ .long _sys_ni_syscall /* sys_freec_hugepages */
+ .long _sys_exit_group
+ .long _sys_lookup_dcookie
+ .long _sys_bfin_spinlock
+ .long _sys_epoll_create /* 255 */
+ .long _sys_epoll_ctl
+ .long _sys_epoll_wait
+ .long _sys_ni_syscall /* remap_file_pages */
+ .long _sys_set_tid_address
+ .long _sys_timer_create /* 260 */
+ .long _sys_timer_settime
+ .long _sys_timer_gettime
+ .long _sys_timer_getoverrun
+ .long _sys_timer_delete
+ .long _sys_clock_settime /* 265 */
+ .long _sys_clock_gettime
+ .long _sys_clock_getres
+ .long _sys_clock_nanosleep
+ .long _sys_statfs64
+ .long _sys_fstatfs64 /* 270 */
+ .long _sys_tgkill
+ .long _sys_utimes
+ .long _sys_fadvise64_64
+ .long _sys_ni_syscall /* vserver */
+ .long _sys_mbind /* 275 */
+ .long _sys_ni_syscall /* get_mempolicy */
+ .long _sys_ni_syscall /* set_mempolicy */
+ .long _sys_mq_open
+ .long _sys_mq_unlink
+ .long _sys_mq_timedsend /* 280 */
+ .long _sys_mq_timedreceive
+ .long _sys_mq_notify
+ .long _sys_mq_getsetattr
+ .long _sys_ni_syscall /* kexec_load */
+ .long _sys_waitid /* 285 */
+ .long _sys_add_key
+ .long _sys_request_key
+ .long _sys_keyctl
+ .long _sys_ioprio_set
+ .long _sys_ioprio_get /* 290 */
+ .long _sys_inotify_init
+ .long _sys_inotify_add_watch
+ .long _sys_inotify_rm_watch
+ .long _sys_ni_syscall /* migrate_pages */
+ .long _sys_openat /* 295 */
+ .long _sys_mkdirat
+ .long _sys_mknodat
+ .long _sys_fchownat
+ .long _sys_futimesat
+ .long _sys_fstatat64 /* 300 */
+ .long _sys_unlinkat
+ .long _sys_renameat
+ .long _sys_linkat
+ .long _sys_symlinkat
+ .long _sys_readlinkat /* 305 */
+ .long _sys_fchmodat
+ .long _sys_faccessat
+ .long _sys_pselect6
+ .long _sys_ppoll
+ .long _sys_unshare /* 310 */
+ .long _sys_sram_alloc
+ .long _sys_sram_free
+ .long _sys_dma_memcpy
+ .long _sys_accept
+ .long _sys_bind /* 315 */
+ .long _sys_connect
+ .long _sys_getpeername
+ .long _sys_getsockname
+ .long _sys_getsockopt
+ .long _sys_listen /* 320 */
+ .long _sys_recv
+ .long _sys_recvfrom
+ .long _sys_recvmsg
+ .long _sys_send
+ .long _sys_sendmsg /* 325 */
+ .long _sys_sendto
+ .long _sys_setsockopt
+ .long _sys_shutdown
+ .long _sys_socket
+ .long _sys_socketpair /* 330 */
+ .long _sys_semctl
+ .long _sys_semget
+ .long _sys_semop
+ .long _sys_msgctl
+ .long _sys_msgget /* 335 */
+ .long _sys_msgrcv
+ .long _sys_msgsnd
+ .long _sys_shmat
+ .long _sys_shmctl
+ .long _sys_shmdt /* 340 */
+ .long _sys_shmget
+ .long _sys_splice
+ .long _sys_sync_file_range
+ .long _sys_tee
+ .long _sys_vmsplice /* 345 */
+ .long _sys_epoll_pwait
+ .long _sys_utimensat
+ .long _sys_signalfd
+ .long _sys_timerfd_create
+ .long _sys_eventfd /* 350 */
+ .long _sys_pread64
+ .long _sys_pwrite64
+ .long _sys_fadvise64
+ .long _sys_set_robust_list
+ .long _sys_get_robust_list /* 355 */
+ .long _sys_fallocate
+ .long _sys_semtimedop
+ .long _sys_timerfd_settime
+ .long _sys_timerfd_gettime
+ .long _sys_signalfd4 /* 360 */
+ .long _sys_eventfd2
+ .long _sys_epoll_create1
+ .long _sys_dup3
+ .long _sys_pipe2
+ .long _sys_inotify_init1 /* 365 */
+ .long _sys_preadv
+ .long _sys_pwritev
+ .long _sys_rt_tgsigqueueinfo
+ .long _sys_perf_event_open
+ .long _sys_recvmmsg /* 370 */
+ .long _sys_fanotify_init
+ .long _sys_fanotify_mark
+ .long _sys_prlimit64
+ .long _sys_cacheflush
+ .long _sys_name_to_handle_at /* 375 */
+ .long _sys_open_by_handle_at
+ .long _sys_clock_adjtime
+ .long _sys_syncfs
+ .long _sys_setns
+ .long _sys_sendmmsg /* 380 */
+ .long _sys_process_vm_readv
+ .long _sys_process_vm_writev
+ .long _sys_kcmp
+ .long _sys_finit_module
+ .long _sys_sched_setattr /* 385 */
+ .long _sys_sched_getattr
+ .long _sys_renameat2
+ .long _sys_seccomp
+ .long _sys_getrandom
+ .long _sys_memfd_create /* 390 */
+ .long _sys_bpf
+ .long _sys_execveat
+
+ .rept NR_syscalls-(.-_sys_call_table)/4
+ .long _sys_ni_syscall
+ .endr
+END(_sys_call_table)