diff --git a/src/kernel/linux/v4.14/arch/blackfin/Clear_BSD.txt b/src/kernel/linux/v4.14/arch/blackfin/Clear_BSD.txt
new file mode 100644
index 0000000..bfa4b37
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/Clear_BSD.txt
@@ -0,0 +1,33 @@
+The Clear BSD license:
+
+Copyright (c) 2012, Analog Devices, Inc.  All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted (subject to the limitations in the
+disclaimer below) provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the
+   distribution.
+
+* Neither the name of Analog Devices, Inc.  nor the names of its
+   contributors may be used to endorse or promote products derived
+   from this software without specific prior written permission.
+
+NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
+GRANTED BY THIS LICENSE.  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
+HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
+WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/src/kernel/linux/v4.14/arch/blackfin/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/Kconfig
new file mode 100644
index 0000000..d9c2866
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/Kconfig
@@ -0,0 +1,1463 @@
+# SPDX-License-Identifier: GPL-2.0
+config MMU
+	def_bool n
+
+config FPU
+	def_bool n
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool y
+
+config RWSEM_XCHGADD_ALGORITHM
+	def_bool n
+
+config BLACKFIN
+	def_bool y
+	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_TRACER
+	select HAVE_IDE
+	select HAVE_KERNEL_GZIP if RAMKERNEL
+	select HAVE_KERNEL_BZIP2 if RAMKERNEL
+	select HAVE_KERNEL_LZMA if RAMKERNEL
+	select HAVE_KERNEL_LZO if RAMKERNEL
+	select HAVE_OPROFILE
+	select HAVE_PERF_EVENTS
+	select ARCH_HAVE_CUSTOM_GPIO_H
+	select GPIOLIB
+	select HAVE_UID16
+	select HAVE_UNDERSCORE_SYMBOL_PREFIX
+	select VIRT_TO_BUS
+	select ARCH_WANT_IPC_PARSE_VERSION
+	select GENERIC_ATOMIC64
+	select GENERIC_IRQ_PROBE
+	select GENERIC_IRQ_SHOW
+	select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
+	select GENERIC_SMP_IDLE_THREAD
+	select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS
+	select HAVE_MOD_ARCH_SPECIFIC
+	select MODULES_USE_ELF_RELA
+	select HAVE_DEBUG_STACKOVERFLOW
+	select HAVE_NMI
+	select ARCH_NO_COHERENT_DMA_MMAP
+
+config GENERIC_CSUM
+	def_bool y
+
+config GENERIC_BUG
+	def_bool y
+	depends on BUG
+
+config ZONE_DMA
+	def_bool y
+
+config FORCE_MAX_ZONEORDER
+	int
+	default "14"
+
+config GENERIC_CALIBRATE_DELAY
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.preempt"
+
+source "kernel/Kconfig.freezer"
+
+menu "Blackfin Processor Options"
+
+comment "Processor and Board Settings"
+
+choice
+	prompt "CPU"
+	default BF533
+
+config BF512
+	bool "BF512"
+	help
+	  BF512 Processor Support.
+
+config BF514
+	bool "BF514"
+	help
+	  BF514 Processor Support.
+
+config BF516
+	bool "BF516"
+	help
+	  BF516 Processor Support.
+
+config BF518
+	bool "BF518"
+	help
+	  BF518 Processor Support.
+
+config BF522
+	bool "BF522"
+	help
+	  BF522 Processor Support.
+
+config BF523
+	bool "BF523"
+	help
+	  BF523 Processor Support.
+
+config BF524
+	bool "BF524"
+	help
+	  BF524 Processor Support.
+
+config BF525
+	bool "BF525"
+	help
+	  BF525 Processor Support.
+
+config BF526
+	bool "BF526"
+	help
+	  BF526 Processor Support.
+
+config BF527
+	bool "BF527"
+	help
+	  BF527 Processor Support.
+
+config BF531
+	bool "BF531"
+	help
+	  BF531 Processor Support.
+
+config BF532
+	bool "BF532"
+	help
+	  BF532 Processor Support.
+
+config BF533
+	bool "BF533"
+	help
+	  BF533 Processor Support.
+
+config BF534
+	bool "BF534"
+	help
+	  BF534 Processor Support.
+
+config BF536
+	bool "BF536"
+	help
+	  BF536 Processor Support.
+
+config BF537
+	bool "BF537"
+	help
+	  BF537 Processor Support.
+
+config BF538
+	bool "BF538"
+	help
+	  BF538 Processor Support.
+
+config BF539
+	bool "BF539"
+	help
+	  BF539 Processor Support.
+
+config BF542_std
+	bool "BF542"
+	help
+	  BF542 Processor Support.
+
+config BF542M
+	bool "BF542m"
+	help
+	  BF542 Processor Support.
+
+config BF544_std
+	bool "BF544"
+	help
+	  BF544 Processor Support.
+
+config BF544M
+	bool "BF544m"
+	help
+	  BF544 Processor Support.
+
+config BF547_std
+	bool "BF547"
+	help
+	  BF547 Processor Support.
+
+config BF547M
+	bool "BF547m"
+	help
+	  BF547 Processor Support.
+
+config BF548_std
+	bool "BF548"
+	help
+	  BF548 Processor Support.
+
+config BF548M
+	bool "BF548m"
+	help
+	  BF548 Processor Support.
+
+config BF549_std
+	bool "BF549"
+	help
+	  BF549 Processor Support.
+
+config BF549M
+	bool "BF549m"
+	help
+	  BF549 Processor Support.
+
+config BF561
+	bool "BF561"
+	help
+	  BF561 Processor Support.
+
+config BF609
+	bool "BF609"
+	select CLKDEV_LOOKUP
+	help
+	  BF609 Processor Support.
+
+endchoice
+
+config SMP
+	depends on BF561
+	select TICKSOURCE_CORETMR
+	bool "Symmetric multi-processing support"
+	---help---
+	  This enables support for systems with more than one CPU,
+	  like the dual core BF561. If you have a system with only one
+	  CPU, say N. If you have a system with more than one CPU, say Y.
+
+	  If you don't know what to do here, say N.
+
+config NR_CPUS
+	int
+	depends on SMP
+	default 2 if BF561
+
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP
+	default y
+
+config BF_REV_MIN
+	int
+	default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) || BF60x
+	default 2 if (BF537 || BF536 || BF534)
+	default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM)
+	default 4 if (BF538 || BF539)
+
+config BF_REV_MAX
+	int
+	default 2 if (BF51x || BF52x || (BF54x && !BF54xM)) || BF60x
+	default 3 if (BF537 || BF536 || BF534 || BF54xM)
+	default 5 if (BF561 || BF538 || BF539)
+	default 6 if (BF533 || BF532 || BF531)
+
+choice
+	prompt "Silicon Rev"
+	default BF_REV_0_0 if (BF51x || BF52x || BF60x)
+	default BF_REV_0_2 if (BF534 || BF536 || BF537 || (BF54x && !BF54xM))
+	default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561)
+
+config BF_REV_0_0
+	bool "0.0"
+	depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x)
+
+config BF_REV_0_1
+	bool "0.1"
+	depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x)
+
+config BF_REV_0_2
+	bool "0.2"
+	depends on (BF51x || BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM))
+
+config BF_REV_0_3
+	bool "0.3"
+	depends on (BF54xM || BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
+
+config BF_REV_0_4
+	bool "0.4"
+	depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539 || BF54x)
+
+config BF_REV_0_5
+	bool "0.5"
+	depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539)
+
+config BF_REV_0_6
+	bool "0.6"
+	depends on (BF533 || BF532 || BF531)
+
+config BF_REV_ANY
+	bool "any"
+
+config BF_REV_NONE
+	bool "none"
+
+endchoice
+
+config BF53x
+	bool
+	depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
+	default y
+
+config GPIO_ADI
+	def_bool y
+	depends on !PINCTRL
+	depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561)
+
+config PINCTRL_BLACKFIN_ADI2
+	def_bool y
+	depends on (BF54x || BF60x)
+	select PINCTRL
+	select PINCTRL_ADI2
+
+config MEM_MT48LC64M4A2FB_7E
+	bool
+	depends on (BFIN533_STAMP)
+	default y
+
+config MEM_MT48LC16M16A2TG_75
+	bool
+	depends on (BFIN533_EZKIT || BFIN561_EZKIT \
+		|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM_E \
+		|| BFIN537_BLUETECHNIX_CM_U || H8606_HVSISTEMAS \
+		|| BFIN527_BLUETECHNIX_CM)
+	default y
+
+config MEM_MT48LC32M8A2_75
+	bool
+	depends on (BFIN518F_EZBRD || BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)
+	default y
+
+config MEM_MT48LC8M32B2B5_7
+	bool
+	depends on (BFIN561_BLUETECHNIX_CM)
+	default y
+
+config MEM_MT48LC32M16A2TG_75
+	bool
+	depends on (BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN532_IP0X || BLACKSTAMP || BFIN527_AD7160EVAL)
+	default y
+
+config MEM_MT48H32M16LFCJ_75
+	bool
+	depends on (BFIN526_EZBRD)
+	default y
+
+config MEM_MT47H64M16
+	bool
+	depends on (BFIN609_EZKIT)
+	default y
+
+source "arch/blackfin/mach-bf518/Kconfig"
+source "arch/blackfin/mach-bf527/Kconfig"
+source "arch/blackfin/mach-bf533/Kconfig"
+source "arch/blackfin/mach-bf561/Kconfig"
+source "arch/blackfin/mach-bf537/Kconfig"
+source "arch/blackfin/mach-bf538/Kconfig"
+source "arch/blackfin/mach-bf548/Kconfig"
+source "arch/blackfin/mach-bf609/Kconfig"
+
+menu "Board customizations"
+
+config CMDLINE_BOOL
+	bool "Default bootloader kernel arguments"
+
+config CMDLINE
+	string "Initial kernel command string"
+	depends on CMDLINE_BOOL
+	default "console=ttyBF0,57600"
+	help
+	  If you don't have a boot loader capable of passing a command line string
+	  to the kernel, you may specify one here. As a minimum, you should specify
+	  the memory size and the root device (e.g., mem=8M, root=/dev/nfs).
+
+config BOOT_LOAD
+	hex "Kernel load address for booting"
+	default "0x1000"
+	range 0x1000 0x20000000
+	help
+	  This option allows you to set the load address of the kernel.
+	  This can be useful if you are on a board which has a small amount
+	  of memory or you wish to reserve some memory at the beginning of
+	  the address space.
+
+	  Note that you need to keep this value above 4k (0x1000) as this
+	  memory region is used to capture NULL pointer references as well
+	  as some core kernel functions.
+
+config PHY_RAM_BASE_ADDRESS
+	hex "Physical RAM Base"
+	default 0x0
+	help
+	  set BF609 FPGA physical SRAM base address
+
+config ROM_BASE
+	hex "Kernel ROM Base"
+	depends on ROMKERNEL
+	default "0x20040040"
+	range 0x20000000 0x20400000 if !(BF54x || BF561 || BF60x)
+	range 0x20000000 0x30000000 if (BF54x || BF561)
+	range 0xB0000000 0xC0000000 if (BF60x)
+	help
+	  Make sure your ROM base does not include any file-header
+	  information that is prepended to the kernel.
+
+	  For example, the bootable U-Boot format (created with
+	  mkimage) has a 64 byte header (0x40).  So while the image
+	  you write to flash might start at say 0x20080000, you have
+	  to add 0x40 to get the kernel's ROM base as it will come
+	  after the header.
+
+comment "Clock/PLL Setup"
+
+config CLKIN_HZ
+	int "Frequency of the crystal on the board in Hz"
+	default "10000000" if BFIN532_IP0X
+	default "11059200" if BFIN533_STAMP
+	default "24576000" if PNAV10
+	default "25000000" # most people use this
+	default "27000000" if BFIN533_EZKIT
+	default "30000000" if BFIN561_EZKIT
+	default "24000000" if BFIN527_AD7160EVAL
+	help
+	  The frequency of CLKIN crystal oscillator on the board in Hz.
+	  Warning: This value should match the crystal on the board. Otherwise,
+	  peripherals won't work properly.
+
+config BFIN_KERNEL_CLOCK
+	bool "Re-program Clocks while Kernel boots?"
+	default n
+	help
+	  This option decides if kernel clocks are re-programed from the
+	  bootloader settings. If the clocks are not set, the SDRAM settings
+	  are also not changed, and the Bootloader does 100% of the hardware
+	  configuration.
+
+config PLL_BYPASS
+	bool "Bypass PLL"
+	depends on BFIN_KERNEL_CLOCK && (!BF60x)
+	default n
+
+config CLKIN_HALF
+	bool "Half Clock In"
+	depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS)
+	default n
+	help
+	  If this is set the clock will be divided by 2, before it goes to the PLL.
+
+config VCO_MULT
+	int "VCO Multiplier"
+	depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS)
+	range 1 64
+	default "22" if BFIN533_EZKIT
+	default "45" if BFIN533_STAMP
+	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
+	default "22" if BFIN533_BLUETECHNIX_CM
+	default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
+	default "20" if (BFIN561_EZKIT || BF609)
+	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
+	default "25" if BFIN527_AD7160EVAL
+	help
+	  This controls the frequency of the on-chip PLL. This can be between 1 and 64.
+	  PLL Frequency = (Crystal Frequency) * (this setting)
+
+choice
+	prompt "Core Clock Divider"
+	depends on BFIN_KERNEL_CLOCK
+	default CCLK_DIV_1
+	help
+	  This sets the frequency of the core. It can be 1, 2, 4 or 8
+	  Core Frequency = (PLL frequency) / (this setting)
+
+config CCLK_DIV_1
+	bool "1"
+
+config CCLK_DIV_2
+	bool "2"
+
+config CCLK_DIV_4
+	bool "4"
+
+config CCLK_DIV_8
+	bool "8"
+endchoice
+
+config SCLK_DIV
+	int "System Clock Divider"
+	depends on BFIN_KERNEL_CLOCK
+	range 1 15
+	default 4
+	help
+	  This sets the frequency of the system clock (including SDRAM or DDR) on
+	  !BF60x else it set the clock for system buses and provides the
+	  source from which SCLK0 and SCLK1 are derived.
+	  This can be between 1 and 15
+	  System Clock = (PLL frequency) / (this setting)
+
+config SCLK0_DIV
+	int "System Clock0 Divider"
+	depends on BFIN_KERNEL_CLOCK && BF60x
+	range 1 15
+	default 1
+	help
+	  This sets the frequency of the system clock0 for PVP and all other
+	  peripherals not clocked by SCLK1.
+	  This can be between 1 and 15
+	  System Clock0 = (System Clock) / (this setting)
+
+config SCLK1_DIV
+	int "System Clock1 Divider"
+	depends on BFIN_KERNEL_CLOCK && BF60x
+	range 1 15
+	default 1
+	help
+	  This sets the frequency of the system clock1 (including SPORT, SPI and ACM).
+	  This can be between 1 and 15
+	  System Clock1 = (System Clock) / (this setting)
+
+config DCLK_DIV
+	int "DDR Clock Divider"
+	depends on BFIN_KERNEL_CLOCK && BF60x
+	range 1 15
+	default 2
+	help
+	  This sets the frequency of the DDR memory.
+	  This can be between 1 and 15
+	  DDR Clock = (PLL frequency) / (this setting)
+
+choice
+	prompt "DDR SDRAM Chip Type"
+	depends on BFIN_KERNEL_CLOCK
+	depends on BF54x
+	default MEM_MT46V32M16_5B
+
+config MEM_MT46V32M16_6T
+	bool "MT46V32M16_6T"
+
+config MEM_MT46V32M16_5B
+	bool "MT46V32M16_5B"
+endchoice
+
+choice
+	prompt "DDR/SDRAM Timing"
+	depends on BFIN_KERNEL_CLOCK && !BF60x
+	default BFIN_KERNEL_CLOCK_MEMINIT_CALC
+	help
+	  This option allows you to specify Blackfin SDRAM/DDR Timing parameters
+	  The calculated SDRAM timing parameters may not be 100%
+	  accurate - This option is therefore marked experimental.
+
+config BFIN_KERNEL_CLOCK_MEMINIT_CALC
+	bool "Calculate Timings"
+
+config BFIN_KERNEL_CLOCK_MEMINIT_SPEC
+	bool "Provide accurate Timings based on target SCLK"
+	help
+	  Please consult the Blackfin Hardware Reference Manuals as well
+	  as the memory device datasheet.
+	  http://docs.blackfin.uclinux.org/doku.php?id=bfin:sdram
+endchoice
+
+menu "Memory Init Control"
+	depends on BFIN_KERNEL_CLOCK_MEMINIT_SPEC
+
+config MEM_DDRCTL0
+	depends on BF54x
+	hex "DDRCTL0"
+	default 0x0
+
+config MEM_DDRCTL1
+	depends on BF54x
+	hex "DDRCTL1"
+	default 0x0
+
+config MEM_DDRCTL2
+	depends on BF54x
+	hex "DDRCTL2"
+	default 0x0
+
+config MEM_EBIU_DDRQUE
+	depends on BF54x
+	hex "DDRQUE"
+	default 0x0
+
+config MEM_SDRRC
+	depends on !BF54x
+	hex "SDRRC"
+	default 0x0
+
+config MEM_SDGCTL
+	depends on !BF54x
+	hex "SDGCTL"
+	default 0x0
+endmenu
+
+#
+# Max & Min Speeds for various Chips
+#
+config MAX_VCO_HZ
+	int
+	default 400000000 if BF512
+	default 400000000 if BF514
+	default 400000000 if BF516
+	default 400000000 if BF518
+	default 400000000 if BF522
+	default 600000000 if BF523
+	default 400000000 if BF524
+	default 600000000 if BF525
+	default 400000000 if BF526
+	default 600000000 if BF527
+	default 400000000 if BF531
+	default 400000000 if BF532
+	default 750000000 if BF533
+	default 500000000 if BF534
+	default 400000000 if BF536
+	default 600000000 if BF537
+	default 533333333 if BF538
+	default 533333333 if BF539
+	default 600000000 if BF542
+	default 533333333 if BF544
+	default 600000000 if BF547
+	default 600000000 if BF548
+	default 533333333 if BF549
+	default 600000000 if BF561
+	default 800000000 if BF609
+
+config MIN_VCO_HZ
+	int
+	default 50000000
+
+config MAX_SCLK_HZ
+	int
+	default 200000000 if BF609
+	default 133333333
+
+config MIN_SCLK_HZ
+	int
+	default 27000000
+
+comment "Kernel Timer/Scheduler"
+
+source kernel/Kconfig.hz
+
+config SET_GENERIC_CLOCKEVENTS
+	bool "Generic clock events"
+	default y
+	select GENERIC_CLOCKEVENTS
+
+menu "Clock event device"
+	depends on GENERIC_CLOCKEVENTS
+config TICKSOURCE_GPTMR0
+	bool "GPTimer0"
+	depends on !SMP
+	select BFIN_GPTIMERS
+
+config TICKSOURCE_CORETMR
+	bool "Core timer"
+	default y
+endmenu
+
+menu "Clock source"
+	depends on GENERIC_CLOCKEVENTS
+config CYCLES_CLOCKSOURCE
+	bool "CYCLES"
+	default y
+	depends on !BFIN_SCRATCH_REG_CYCLES
+	depends on !SMP
+	help
+	  If you say Y here, you will enable support for using the 'cycles'
+	  registers as a clock source.  Doing so means you will be unable to
+	  safely write to the 'cycles' register during runtime.  You will
+	  still be able to read it (such as for performance monitoring), but
+	  writing the registers will most likely crash the kernel.
+
+config GPTMR0_CLOCKSOURCE
+	bool "GPTimer0"
+	select BFIN_GPTIMERS
+	depends on !TICKSOURCE_GPTMR0
+endmenu
+
+comment "Misc"
+
+choice
+	prompt "Blackfin Exception Scratch Register"
+	default BFIN_SCRATCH_REG_RETN
+	help
+	  Select the resource to reserve for the Exception handler:
+	    - RETN: Non-Maskable Interrupt (NMI)
+	    - RETE: Exception Return (JTAG/ICE)
+	    - CYCLES: Performance counter
+
+	  If you are unsure, please select "RETN".
+
+config BFIN_SCRATCH_REG_RETN
+	bool "RETN"
+	help
+	  Use the RETN register in the Blackfin exception handler
+	  as a stack scratch register.  This means you cannot
+	  safely use NMI on the Blackfin while running Linux, but
+	  you can debug the system with a JTAG ICE and use the
+	  CYCLES performance registers.
+
+	  If you are unsure, please select "RETN".
+
+config BFIN_SCRATCH_REG_RETE
+	bool "RETE"
+	help
+	  Use the RETE register in the Blackfin exception handler
+	  as a stack scratch register.  This means you cannot
+	  safely use a JTAG ICE while debugging a Blackfin board,
+	  but you can safely use the CYCLES performance registers
+	  and the NMI.
+
+	  If you are unsure, please select "RETN".
+
+config BFIN_SCRATCH_REG_CYCLES
+	bool "CYCLES"
+	help
+	  Use the CYCLES register in the Blackfin exception handler
+	  as a stack scratch register.  This means you cannot
+	  safely use the CYCLES performance registers on a Blackfin
+	  board at anytime, but you can debug the system with a JTAG
+	  ICE and use the NMI.
+
+	  If you are unsure, please select "RETN".
+
+endchoice
+
+endmenu
+
+
+menu "Blackfin Kernel Optimizations"
+
+comment "Memory Optimizations"
+
+config I_ENTRY_L1
+	bool "Locate interrupt entry code in L1 Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled, interrupt entry code (STORE/RESTORE CONTEXT) is linked
+	  into L1 instruction memory. (less latency)
+
+config EXCPT_IRQ_SYSC_L1
+	bool "Locate entire ASM lowlevel exception / interrupt - Syscall and CPLB handler code in L1 Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled, the entire ASM lowlevel exception and interrupt entry code
+	  (STORE/RESTORE CONTEXT) is linked into L1 instruction memory.
+	  (less latency)
+
+config DO_IRQ_L1
+	bool "Locate frequently called do_irq dispatcher function in L1 Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled, the frequently called do_irq dispatcher function is linked
+	  into L1 instruction memory. (less latency)
+
+config CORE_TIMER_IRQ_L1
+	bool "Locate frequently called timer_interrupt() function in L1 Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled, the frequently called timer_interrupt() function is linked
+	  into L1 instruction memory. (less latency)
+
+config IDLE_L1
+	bool "Locate frequently idle function in L1 Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled, the frequently called idle function is linked
+	  into L1 instruction memory. (less latency)
+
+config SCHEDULE_L1
+	bool "Locate kernel schedule function in L1 Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled, the frequently called kernel schedule is linked
+	  into L1 instruction memory. (less latency)
+
+config ARITHMETIC_OPS_L1
+	bool "Locate kernel owned arithmetic functions in L1 Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled, arithmetic functions are linked
+	  into L1 instruction memory. (less latency)
+
+config ACCESS_OK_L1
+	bool "Locate access_ok function in L1 Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled, the access_ok function is linked
+	  into L1 instruction memory. (less latency)
+
+config MEMSET_L1
+	bool "Locate memset function in L1 Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled, the memset function is linked
+	  into L1 instruction memory. (less latency)
+
+config MEMCPY_L1
+	bool "Locate memcpy function in L1 Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled, the memcpy function is linked
+	  into L1 instruction memory. (less latency)
+
+config STRCMP_L1
+	bool "locate strcmp function in L1 Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled, the strcmp function is linked
+	  into L1 instruction memory (less latency).
+
+config STRNCMP_L1
+	bool "locate strncmp function in L1 Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled, the strncmp function is linked
+	  into L1 instruction memory (less latency).
+
+config STRCPY_L1
+	bool "locate strcpy function in L1 Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled, the strcpy function is linked
+	  into L1 instruction memory (less latency).
+
+config STRNCPY_L1
+	bool "locate strncpy function in L1 Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled, the strncpy function is linked
+	  into L1 instruction memory (less latency).
+
+config SYS_BFIN_SPINLOCK_L1
+	bool "Locate sys_bfin_spinlock function in L1 Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled, sys_bfin_spinlock function is linked
+	  into L1 instruction memory. (less latency)
+
+config CACHELINE_ALIGNED_L1
+	bool "Locate cacheline_aligned data to L1 Data Memory"
+	default y if !BF54x
+	default n if BF54x
+	depends on !SMP && !BF531 && !CRC32
+	help
+	  If enabled, cacheline_aligned data is linked
+	  into L1 data memory. (less latency)
+
+config SYSCALL_TAB_L1
+	bool "Locate Syscall Table L1 Data Memory"
+	default n
+	depends on !SMP && !BF531
+	help
+	  If enabled, the Syscall LUT is linked
+	  into L1 data memory. (less latency)
+
+config CPLB_SWITCH_TAB_L1
+	bool "Locate CPLB Switch Tables L1 Data Memory"
+	default n
+	depends on !SMP && !BF531
+	help
+	  If enabled, the CPLB Switch Tables are linked
+	  into L1 data memory. (less latency)
+
+config ICACHE_FLUSH_L1
+	bool "Locate icache flush funcs in L1 Inst Memory"
+	default y
+	help
+	  If enabled, the Blackfin icache flushing functions are linked
+	  into L1 instruction memory.
+
+	  Note that this might be required to address anomalies, but
+	  these functions are pretty small, so it shouldn't be too bad.
+	  If you are using a processor affected by an anomaly, the build
+	  system will double check for you and prevent it.
+
+config DCACHE_FLUSH_L1
+	bool "Locate dcache flush funcs in L1 Inst Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled, the Blackfin dcache flushing functions are linked
+	  into L1 instruction memory.
+
+config APP_STACK_L1
+	bool "Support locating application stack in L1 Scratch Memory"
+	default y
+	depends on !SMP
+	help
+	  If enabled the application stack can be located in L1
+	  scratch memory (less latency).
+
+	  Currently only works with FLAT binaries.
+
+config EXCEPTION_L1_SCRATCH
+	bool "Locate exception stack in L1 Scratch Memory"
+	default n
+	depends on !SMP && !APP_STACK_L1
+	help
+	  Whenever an exception occurs, use the L1 Scratch memory for
+	  stack storage.  You cannot place the stacks of FLAT binaries
+	  in L1 when using this option.
+
+	  If you don't use L1 Scratch, then you should say Y here.
+
+comment "Speed Optimizations"
+config BFIN_INS_LOWOVERHEAD
+	bool "ins[bwl] low overhead, higher interrupt latency"
+	default y
+	depends on !SMP
+	help
+	  Reads on the Blackfin are speculative. In Blackfin terms, this means
+	  they can be interrupted at any time (even after they have been issued
+	  on to the external bus), and re-issued after the interrupt occurs.
+	  For memory - this is not a big deal, since memory does not change if
+	  it sees a read.
+
+	  If a FIFO is sitting on the end of the read, it will see two reads,
+	  when the core only sees one since the FIFO receives both the read
+	  which is cancelled (and not delivered to the core) and the one which
+	  is re-issued (which is delivered to the core).
+
+	  To solve this, interrupts are turned off before reads occur to
+	  I/O space. This option controls which the overhead/latency of
+	  controlling interrupts during this time
+	   "n" turns interrupts off every read
+		(higher overhead, but lower interrupt latency)
+	   "y" turns interrupts off every loop
+		(low overhead, but longer interrupt latency)
+
+	  default behavior is to leave this set to on (type "Y"). If you are experiencing
+	  interrupt latency issues, it is safe and OK to turn this off.
+
+endmenu
+
+choice
+	prompt "Kernel executes from"
+	help
+	  Choose the memory type that the kernel will be running in.
+
+config RAMKERNEL
+	bool "RAM"
+	help
+	  The kernel will be resident in RAM when running.
+
+config ROMKERNEL
+	bool "ROM"
+	help
+	  The kernel will be resident in FLASH/ROM when running.
+
+endchoice
+
+# Common code uses "ROMKERNEL" or "XIP_KERNEL", so define both
+config XIP_KERNEL
+	bool
+	default y
+	depends on ROMKERNEL
+
+source "mm/Kconfig"
+
+config BFIN_GPTIMERS
+	tristate "Enable Blackfin General Purpose Timers API"
+	default n
+	help
+	  Enable support for the General Purpose Timers API.  If you
+	  are unsure, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called gptimers.
+
+choice
+	prompt "Uncached DMA region"
+	default DMA_UNCACHED_1M
+config DMA_UNCACHED_32M
+	bool "Enable 32M DMA region"
+config DMA_UNCACHED_16M
+	bool "Enable 16M DMA region"
+config DMA_UNCACHED_8M
+	bool "Enable 8M DMA region"
+config DMA_UNCACHED_4M
+	bool "Enable 4M DMA region"
+config DMA_UNCACHED_2M
+	bool "Enable 2M DMA region"
+config DMA_UNCACHED_1M
+	bool "Enable 1M DMA region"
+config DMA_UNCACHED_512K
+	bool "Enable 512K DMA region"
+config DMA_UNCACHED_256K
+	bool "Enable 256K DMA region"
+config DMA_UNCACHED_128K
+	bool "Enable 128K DMA region"
+config DMA_UNCACHED_NONE
+	bool "Disable DMA region"
+endchoice
+
+
+comment "Cache Support"
+
+config BFIN_ICACHE
+	bool "Enable ICACHE"
+	default y
+config BFIN_EXTMEM_ICACHEABLE
+	bool "Enable ICACHE for external memory"
+	depends on BFIN_ICACHE
+	default y
+config BFIN_L2_ICACHEABLE
+	bool "Enable ICACHE for L2 SRAM"
+	depends on BFIN_ICACHE
+	depends on (BF54x || BF561 || BF60x) && !SMP
+	default n
+
+config BFIN_DCACHE
+	bool "Enable DCACHE"
+	default y
+config BFIN_DCACHE_BANKA
+	bool "Enable only 16k BankA DCACHE - BankB is SRAM"
+	depends on BFIN_DCACHE && !BF531
+	default n
+config BFIN_EXTMEM_DCACHEABLE
+	bool "Enable DCACHE for external memory"
+	depends on BFIN_DCACHE
+	default y
+choice
+	prompt "External memory DCACHE policy"
+	depends on BFIN_EXTMEM_DCACHEABLE
+	default BFIN_EXTMEM_WRITEBACK if !SMP
+	default BFIN_EXTMEM_WRITETHROUGH if SMP
+config BFIN_EXTMEM_WRITEBACK
+	bool "Write back"
+	depends on !SMP
+	help
+	  Write Back Policy:
+	    Cached data will be written back to SDRAM only when needed.
+	    This can give a nice increase in performance, but beware of
+	    broken drivers that do not properly invalidate/flush their
+	    cache.
+
+	  Write Through Policy:
+	    Cached data will always be written back to SDRAM when the
+	    cache is updated.  This is a completely safe setting, but
+	    performance is worse than Write Back.
+
+	  If you are unsure of the options and you want to be safe,
+	  then go with Write Through.
+
+config BFIN_EXTMEM_WRITETHROUGH
+	bool "Write through"
+	help
+	  Write Back Policy:
+	    Cached data will be written back to SDRAM only when needed.
+	    This can give a nice increase in performance, but beware of
+	    broken drivers that do not properly invalidate/flush their
+	    cache.
+
+	  Write Through Policy:
+	    Cached data will always be written back to SDRAM when the
+	    cache is updated.  This is a completely safe setting, but
+	    performance is worse than Write Back.
+
+	  If you are unsure of the options and you want to be safe,
+	  then go with Write Through.
+
+endchoice
+
+config BFIN_L2_DCACHEABLE
+	bool "Enable DCACHE for L2 SRAM"
+	depends on BFIN_DCACHE
+	depends on (BF54x || BF561 || BF60x) && !SMP
+	default n
+choice
+	prompt "L2 SRAM DCACHE policy"
+	depends on BFIN_L2_DCACHEABLE
+	default BFIN_L2_WRITEBACK
+config BFIN_L2_WRITEBACK
+	bool "Write back"
+
+config BFIN_L2_WRITETHROUGH
+	bool "Write through"
+endchoice
+
+
+comment "Memory Protection Unit"
+config MPU
+	bool "Enable the memory protection unit"
+	default n
+	help
+	  Use the processor's MPU to protect applications from accessing
+	  memory they do not own.  This comes at a performance penalty
+	  and is recommended only for debugging.
+
+comment "Asynchronous Memory Configuration"
+
+menu "EBIU_AMGCTL Global Control"
+	depends on !BF60x
+config C_AMCKEN
+	bool "Enable CLKOUT"
+	default y
+
+config C_CDPRIO
+	bool "DMA has priority over core for ext. accesses"
+	default n
+
+config C_B0PEN
+	depends on BF561
+	bool "Bank 0 16 bit packing enable"
+	default y
+
+config C_B1PEN
+	depends on BF561
+	bool "Bank 1 16 bit packing enable"
+	default y
+
+config C_B2PEN
+	depends on BF561
+	bool "Bank 2 16 bit packing enable"
+	default y
+
+config C_B3PEN
+	depends on BF561
+	bool "Bank 3 16 bit packing enable"
+	default n
+
+choice
+	prompt "Enable Asynchronous Memory Banks"
+	default C_AMBEN_ALL
+
+config C_AMBEN
+	bool "Disable All Banks"
+
+config C_AMBEN_B0
+	bool "Enable Bank 0"
+
+config C_AMBEN_B0_B1
+	bool "Enable Bank 0 & 1"
+
+config C_AMBEN_B0_B1_B2
+	bool "Enable Bank 0 & 1 & 2"
+
+config C_AMBEN_ALL
+	bool "Enable All Banks"
+endchoice
+endmenu
+
+menu "EBIU_AMBCTL Control"
+	depends on !BF60x
+config BANK_0
+	hex "Bank 0 (AMBCTL0.L)"
+	default 0x7BB0
+	help
+	  These are the low 16 bits of the EBIU_AMBCTL0 MMR which are
+	  used to control the Asynchronous Memory Bank 0 settings.
+
+config BANK_1
+	hex "Bank 1 (AMBCTL0.H)"
+	default 0x7BB0
+	default 0x5558 if BF54x
+	help
+	  These are the high 16 bits of the EBIU_AMBCTL0 MMR which are
+	  used to control the Asynchronous Memory Bank 1 settings.
+
+config BANK_2
+	hex "Bank 2 (AMBCTL1.L)"
+	default 0x7BB0
+	help
+	  These are the low 16 bits of the EBIU_AMBCTL1 MMR which are
+	  used to control the Asynchronous Memory Bank 2 settings.
+
+config BANK_3
+	hex "Bank 3 (AMBCTL1.H)"
+	default 0x99B3
+	help
+	  These are the high 16 bits of the EBIU_AMBCTL1 MMR which are
+	  used to control the Asynchronous Memory Bank 3 settings.
+
+endmenu
+
+config EBIU_MBSCTLVAL
+	hex "EBIU Bank Select Control Register"
+	depends on BF54x
+	default 0
+
+config EBIU_MODEVAL
+	hex "Flash Memory Mode Control Register"
+	depends on BF54x
+	default 1
+
+config EBIU_FCTLVAL
+	hex "Flash Memory Bank Control Register"
+	depends on BF54x
+	default 6
+endmenu
+
+#############################################################################
+menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
+
+config PCI
+	bool "PCI support"
+	depends on BROKEN
+	help
+	  Support for PCI bus.
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+menu "Power management options"
+
+source "kernel/power/Kconfig"
+
+config ARCH_SUSPEND_POSSIBLE
+	def_bool y
+
+choice
+	prompt "Standby Power Saving Mode"
+	depends on PM && !BF60x
+	default PM_BFIN_SLEEP_DEEPER
+config  PM_BFIN_SLEEP_DEEPER
+	bool "Sleep Deeper"
+	help
+	  Sleep "Deeper" Mode (High Power Savings) - This mode reduces dynamic
+	  power dissipation by disabling the clock to the processor core (CCLK).
+	  Furthermore, Standby sets the internal power supply voltage (VDDINT)
+	  to 0.85 V to provide the greatest power savings, while preserving the
+	  processor state.
+	  The PLL and system clock (SCLK) continue to operate at a very low
+	  frequency of about 3.3 MHz. To preserve data integrity in the SDRAM,
+	  the SDRAM is put into Self Refresh Mode. Typically an external event
+	  such as GPIO interrupt or RTC activity wakes up the processor.
+	  Various Peripherals such as UART, SPORT, PPI may not function as
+	  normal during Sleep Deeper, due to the reduced SCLK frequency.
+	  When in the sleep mode, system DMA access to L1 memory is not supported.
+
+	  If unsure, select "Sleep Deeper".
+
+config  PM_BFIN_SLEEP
+	bool "Sleep"
+	help
+	  Sleep Mode (High Power Savings) - The sleep mode reduces power
+	  dissipation by disabling the clock to the processor core (CCLK).
+	  The PLL and system clock (SCLK), however, continue to operate in
+	  this mode. Typically an external event or RTC activity will wake
+	  up the processor. When in the sleep mode, system DMA access to L1
+	  memory is not supported.
+
+	  If unsure, select "Sleep Deeper".
+endchoice
+
+comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
+	depends on PM
+
+config PM_BFIN_WAKE_PH6
+	bool "Allow Wake-Up from on-chip PHY or PH6 GP"
+	depends on PM && (BF51x || BF52x || BF534 || BF536 || BF537)
+	default n
+	help
+	  Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_GP
+	bool "Allow Wake-Up from GPIOs"
+	depends on PM && BF54x
+	default n
+	help
+	  Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
+	  (all processors, except ADSP-BF549). This option sets
+	  the general-purpose wake-up enable (GPWE) control bit to enable
+	  wake-up upon detection of an active low signal on the /GPW (PH7) pin.
+	  On ADSP-BF549 this option enables the same functionality on the
+	  /MRXON pin also PH7.
+
+config PM_BFIN_WAKE_PA15
+	bool "Allow Wake-Up from PA15"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PA15 Wake-Up
+
+config PM_BFIN_WAKE_PA15_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PA15
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PB15
+	bool "Allow Wake-Up from PB15"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PB15 Wake-Up
+
+config PM_BFIN_WAKE_PB15_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PB15
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PC15
+	bool "Allow Wake-Up from PC15"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PC15 Wake-Up
+
+config PM_BFIN_WAKE_PC15_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PC15
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PD06
+	bool "Allow Wake-Up from PD06(ETH0_PHYINT)"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PD06(ETH0_PHYINT) Wake-up
+
+config PM_BFIN_WAKE_PD06_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PD06
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PE12
+	bool "Allow Wake-Up from PE12(ETH1_PHYINT, PUSH BUTTON)"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PE12(ETH1_PHYINT, PUSH BUTTON) Wake-up
+
+config PM_BFIN_WAKE_PE12_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PE12
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PG04
+	bool "Allow Wake-Up from PG04(CAN0_RX)"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PG04(CAN0_RX) Wake-up
+
+config PM_BFIN_WAKE_PG04_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PG04
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PG13
+	bool "Allow Wake-Up from PG13"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PG13 Wake-Up
+
+config PM_BFIN_WAKE_PG13_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PG13
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_USB
+	bool "Allow Wake-Up from (USB)"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable (USB) Wake-up
+
+config PM_BFIN_WAKE_USB_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_USB
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+endmenu
+
+menu "CPU Frequency scaling"
+
+source "drivers/cpufreq/Kconfig"
+
+config BFIN_CPU_FREQ
+	bool
+	depends on CPU_FREQ
+	default y
+
+config CPU_VOLTAGE
+	bool "CPU Voltage scaling"
+	depends on CPU_FREQ
+	default n
+	help
+	  Say Y here if you want CPU voltage scaling according to the CPU frequency.
+	  This option violates the PLL BYPASS recommendation in the Blackfin Processor
+	  manuals. There is a theoretical risk that during VDDINT transitions
+	  the PLL may unlock.
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "drivers/firmware/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/blackfin/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/src/kernel/linux/v4.14/arch/blackfin/Kconfig.debug b/src/kernel/linux/v4.14/arch/blackfin/Kconfig.debug
new file mode 100644
index 0000000..c8d9572
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/Kconfig.debug
@@ -0,0 +1,258 @@
+# SPDX-License-Identifier: GPL-2.0
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config DEBUG_VERBOSE
+	bool "Verbose fault messages"
+	default y
+	select PRINTK
+	help
+	  When a program crashes due to an exception, or the kernel detects
+	  an internal error, the kernel can print a not so brief message
+	  explaining what the problem was. This debugging information is
+	  useful to developers and kernel hackers when tracking down problems,
+	  but mostly meaningless to other people. This is always helpful for
+	  debugging but serves no purpose on a production system.
+	  Most people should say N here.
+
+config DEBUG_MMRS
+	tristate "Generate Blackfin MMR tree"
+	depends on !PINCTRL
+	select DEBUG_FS
+	help
+	  Create a tree of Blackfin MMRs via the debugfs tree.  If
+	  you enable this, you will find all MMRs laid out in the
+	  /sys/kernel/debug/blackfin/ directory where you can read/write
+	  MMRs directly from userspace.  This is obviously just a debug
+	  feature.
+
+config DEBUG_HWERR
+	bool "Hardware error interrupt debugging"
+	depends on DEBUG_KERNEL
+	help
+	  When enabled, the hardware error interrupt is never disabled, and
+	  will happen immediately when an error condition occurs.  This comes
+	  at a slight cost in code size, but is necessary if you are getting
+	  hardware error interrupts and need to know where they are coming
+	  from.
+
+config EXACT_HWERR
+	bool "Try to make Hardware errors exact"
+	depends on DEBUG_HWERR
+	help
+	  By default, the Blackfin hardware errors are not exact - the error
+          be reported multiple cycles after the error happens. This delay
+	  can cause the wrong application, or even the kernel to receive a
+	  signal to be killed. If you are getting HW errors in your system,
+	  try turning this on to ensure they are at least coming from the
+	  proper thread.
+
+	  On production systems, it is safe (and a small optimization) to say N.
+
+config DEBUG_DOUBLEFAULT
+	bool "Debug Double Faults"
+	default n
+	help
+	  If an exception is caused while executing code within the exception
+	  handler, the NMI handler, the reset vector, or in emulator mode,
+	  a double fault occurs. On the Blackfin, this is a unrecoverable
+	  event. You have two options:
+	  - RESET exactly when double fault occurs. The excepting
+	    instruction address is stored in RETX, where the next kernel
+	    boot will print it out.
+	  - Print debug message. This is much more error prone, although
+	    easier to handle. It is error prone since:
+	    - The excepting instruction is not committed.
+	    - All writebacks from the instruction are prevented.
+	    - The generated exception is not taken.
+	    - The EXCAUSE field is updated with an unrecoverable event
+	    The only way to check this is to see if EXCAUSE contains the
+	    unrecoverable event value at every exception return. By selecting
+	    this option, you are skipping over the faulting instruction, and 
+	    hoping things stay together enough to print out a debug message.
+
+	  This does add a little kernel code, but is the only method to debug
+	  double faults - if unsure say "Y"
+
+choice
+	prompt "Double Fault Failure Method"
+	default DEBUG_DOUBLEFAULT_PRINT
+	depends on DEBUG_DOUBLEFAULT
+
+config DEBUG_DOUBLEFAULT_PRINT
+	bool "Print"
+
+config DEBUG_DOUBLEFAULT_RESET
+	bool "Reset"
+
+endchoice
+
+config DEBUG_HUNT_FOR_ZERO
+	bool "Catch NULL pointer reads/writes"
+	default y
+	help
+	  Say Y here to catch reads/writes to anywhere in the memory range
+	  from 0x0000 - 0x0FFF (the first 4k) of memory.  This is useful in
+	  catching common programming errors such as NULL pointer dereferences.
+
+	  Misbehaving applications will be killed (generate a SEGV) while the
+	  kernel will trigger a panic.
+
+	  Enabling this option will take up an extra entry in CPLB table.
+	  Otherwise, there is no extra overhead.
+
+config DEBUG_BFIN_HWTRACE_ON
+	bool "Turn on Blackfin's Hardware Trace"
+	default y
+	help
+	  All Blackfins include a Trace Unit which stores a history of the last
+	  16 changes in program flow taken by the program sequencer. The history
+	  allows the user to recreate the program sequencer’s recent path. This
+	  can be handy when an application dies - we print out the execution
+	  path of how it got to the offending instruction.
+
+	  By turning this off, you may save a tiny amount of power.
+
+choice
+	prompt "Omit loop Tracing"
+	default DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+	depends on DEBUG_BFIN_HWTRACE_ON
+	help
+	  The trace buffer can be configured to omit recording of changes in
+	  program flow that match either the last entry or one of the last
+	  two entries. Omitting one of these entries from the record prevents
+	  the trace buffer from overflowing because of any sort of loop (for, do
+	  while, etc) in the program.
+
+	  Because zero-overhead Hardware loops are not recorded in the trace buffer,
+	  this feature can be used to prevent trace overflow from loops that
+	  are nested four deep.
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+	bool "Trace all Loops"
+	help
+	  The trace buffer records all changes of flow 
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_ONE
+	bool "Compress single-level loops"
+	help
+	  The trace buffer does not record single loops - helpful if trace 
+	  is spinning on a while or do loop.
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_TWO
+	bool "Compress two-level loops"
+	help
+	  The trace buffer does not record loops two levels deep. Helpful if
+	  the trace is spinning in a nested loop
+
+endchoice
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION
+	int
+	depends on DEBUG_BFIN_HWTRACE_ON
+	default 0 if DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+	default 1 if DEBUG_BFIN_HWTRACE_COMPRESSION_ONE
+	default 2 if DEBUG_BFIN_HWTRACE_COMPRESSION_TWO
+
+
+config DEBUG_BFIN_HWTRACE_EXPAND
+	bool "Expand Trace Buffer greater than 16 entries"
+	depends on DEBUG_BFIN_HWTRACE_ON
+	default n
+	help
+	  By selecting this option, every time the 16 hardware entries in
+	  the Blackfin's HW Trace buffer are full, the kernel will move them
+	  into a software buffer, for dumping when there is an issue. This 
+	  has a great impact on performance, (an interrupt every 16 change of 
+	  flows) and should normally be turned off, except in those nasty
+	  debugging sessions
+
+config DEBUG_BFIN_HWTRACE_EXPAND_LEN
+	int "Size of Trace buffer (in power of 2k)"
+	range 0 4
+	depends on DEBUG_BFIN_HWTRACE_EXPAND
+	default 1
+	help
+	  This sets the size of the software buffer that the trace information
+	  is kept in.
+	  0 for (2^0)  1k, or 256 entries,
+	  1 for (2^1)  2k, or 512 entries,
+	  2 for (2^2)  4k, or 1024 entries,
+	  3 for (2^3)  8k, or 2048 entries,
+	  4 for (2^4) 16k, or 4096 entries
+
+config DEBUG_BFIN_NO_KERN_HWTRACE
+	bool "Turn off hwtrace in CPLB handlers"
+	depends on DEBUG_BFIN_HWTRACE_ON
+	default y
+	help
+	  The CPLB error handler contains a lot of flow changes which can
+	  quickly fill up the hardware trace buffer.  When debugging crashes,
+	  the hardware trace may indicate that the problem lies in kernel
+	  space when in reality an application is buggy.
+
+	  Say Y here to disable hardware tracing in some known "jumpy" pieces
+	  of code so that the trace buffer will extend further back.
+
+config EARLY_PRINTK
+	bool "Early printk" 
+	default n
+	select SERIAL_CORE_CONSOLE
+	help
+	  This option enables special console drivers which allow the kernel
+	  to print messages very early in the bootup process.
+
+	  This is useful for kernel debugging when your machine crashes very
+	  early before the console code is initialized. After enabling this
+	  feature, you must add "earlyprintk=serial,uart0,57600" to the
+	  command line (bootargs). It is safe to say Y here in all cases, as
+	  all of this lives in the init section and is thrown away after the
+	  kernel boots completely.
+
+config NMI_WATCHDOG
+	bool "Enable NMI watchdog to help debugging lockup on SMP"
+	default n
+	depends on SMP
+	help
+	  If any CPU in the system does not execute the period local timer
+	  interrupt for more than 5 seconds, then the NMI handler dumps debug
+	  information. This information can be used to debug the lockup.
+
+config CPLB_INFO
+	bool "Display the CPLB information"
+	help
+	  Display the CPLB information via /proc/cplbinfo.
+
+config ACCESS_CHECK
+	bool "Check the user pointer address"
+	default y
+	help
+	  Usually the pointer transfer from user space is checked to see if its
+	  address is in the kernel space.
+
+	  Say N here to disable that check to improve the performance.
+
+config BFIN_ISRAM_SELF_TEST
+	bool "isram boot self tests"
+	default n
+	help
+	  Run some self tests of the isram driver code at boot.
+
+config BFIN_PSEUDODBG_INSNS
+	bool "Support pseudo debug instructions"
+	default n
+	help
+	  This option allows the kernel to emulate some pseudo instructions which
+	  allow simulator test cases to be run under Linux with no changes.
+
+	  Most people should say N here.
+
+config BFIN_PM_WAKEUP_TIME_BENCH
+	bool "Display the total time for kernel to resume from power saving mode"
+	default n
+	help
+	  Display the total time when kernel resumes normal from standby or
+	  suspend to mem mode.
+
+endmenu
diff --git a/src/kernel/linux/v4.14/arch/blackfin/Makefile b/src/kernel/linux/v4.14/arch/blackfin/Makefile
new file mode 100644
index 0000000..1fce086
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/Makefile
@@ -0,0 +1,168 @@
+#
+# arch/blackfin/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+ifeq ($(CROSS_COMPILE),)
+CROSS_COMPILE    := bfin-uclinux-
+endif
+LDFLAGS_vmlinux  := -X
+OBJCOPYFLAGS     := -O binary -R .note -R .comment -S
+GZFLAGS          := -9
+
+KBUILD_CFLAGS           += $(call cc-option,-mno-fdpic)
+ifeq ($(CONFIG_ROMKERNEL),y)
+KBUILD_CFLAGS           += -mlong-calls
+endif
+KBUILD_AFLAGS           += $(call cc-option,-mno-fdpic)
+KBUILD_CFLAGS_MODULE    += -mlong-calls
+LDFLAGS                 += -m elf32bfin
+
+KBUILD_DEFCONFIG := BF537-STAMP_defconfig
+
+# setup the machine name and the machine dependent settings
+machine-$(CONFIG_BF512)  := bf518
+machine-$(CONFIG_BF514)  := bf518
+machine-$(CONFIG_BF516)  := bf518
+machine-$(CONFIG_BF518)  := bf518
+machine-$(CONFIG_BF522)  := bf527
+machine-$(CONFIG_BF523)  := bf527
+machine-$(CONFIG_BF524)  := bf527
+machine-$(CONFIG_BF525)  := bf527
+machine-$(CONFIG_BF526)  := bf527
+machine-$(CONFIG_BF527)  := bf527
+machine-$(CONFIG_BF531)  := bf533
+machine-$(CONFIG_BF532)  := bf533
+machine-$(CONFIG_BF533)  := bf533
+machine-$(CONFIG_BF534)  := bf537
+machine-$(CONFIG_BF536)  := bf537
+machine-$(CONFIG_BF537)  := bf537
+machine-$(CONFIG_BF538)  := bf538
+machine-$(CONFIG_BF539)  := bf538
+machine-$(CONFIG_BF542)  := bf548
+machine-$(CONFIG_BF542M) := bf548
+machine-$(CONFIG_BF544)  := bf548
+machine-$(CONFIG_BF544M) := bf548
+machine-$(CONFIG_BF547)  := bf548
+machine-$(CONFIG_BF547M) := bf548
+machine-$(CONFIG_BF548)  := bf548
+machine-$(CONFIG_BF548M) := bf548
+machine-$(CONFIG_BF549)  := bf548
+machine-$(CONFIG_BF549M) := bf548
+machine-$(CONFIG_BF561)  := bf561
+machine-$(CONFIG_BF609)  := bf609
+MACHINE := $(machine-y)
+export MACHINE
+
+cpu-$(CONFIG_BF512)  := bf512
+cpu-$(CONFIG_BF514)  := bf514
+cpu-$(CONFIG_BF516)  := bf516
+cpu-$(CONFIG_BF518)  := bf518
+cpu-$(CONFIG_BF522)  := bf522
+cpu-$(CONFIG_BF523)  := bf523
+cpu-$(CONFIG_BF524)  := bf524
+cpu-$(CONFIG_BF525)  := bf525
+cpu-$(CONFIG_BF526)  := bf526
+cpu-$(CONFIG_BF527)  := bf527
+cpu-$(CONFIG_BF531)  := bf531
+cpu-$(CONFIG_BF532)  := bf532
+cpu-$(CONFIG_BF533)  := bf533
+cpu-$(CONFIG_BF534)  := bf534
+cpu-$(CONFIG_BF536)  := bf536
+cpu-$(CONFIG_BF537)  := bf537
+cpu-$(CONFIG_BF538)  := bf538
+cpu-$(CONFIG_BF539)  := bf539
+cpu-$(CONFIG_BF542)  := bf542
+cpu-$(CONFIG_BF542M) := bf542m
+cpu-$(CONFIG_BF544)  := bf544
+cpu-$(CONFIG_BF544M) := bf544m
+cpu-$(CONFIG_BF547)  := bf547
+cpu-$(CONFIG_BF547M) := bf547m
+cpu-$(CONFIG_BF548)  := bf548
+cpu-$(CONFIG_BF548M) := bf548m
+cpu-$(CONFIG_BF549)  := bf549
+cpu-$(CONFIG_BF549M) := bf549m
+cpu-$(CONFIG_BF561)  := bf561
+cpu-$(CONFIG_BF609)  := bf609
+
+rev-$(CONFIG_BF_REV_0_0)  := 0.0
+rev-$(CONFIG_BF_REV_0_1)  := 0.1
+rev-$(CONFIG_BF_REV_0_2)  := 0.2
+rev-$(CONFIG_BF_REV_0_3)  := 0.3
+rev-$(CONFIG_BF_REV_0_4)  := 0.4
+rev-$(CONFIG_BF_REV_0_5)  := 0.5
+rev-$(CONFIG_BF_REV_0_6)  := 0.6
+rev-$(CONFIG_BF_REV_NONE) := none
+rev-$(CONFIG_BF_REV_ANY)  := any
+
+CPU_REV := $(cpu-y)-$(rev-y)
+export CPU_REV
+
+KBUILD_CFLAGS += -mcpu=$(CPU_REV)
+KBUILD_AFLAGS += -mcpu=$(CPU_REV)
+
+# - we utilize the silicon rev from the toolchain, so move it over to the checkflags
+CHECKFLAGS_SILICON = $(shell echo "" | $(CPP) $(KBUILD_CFLAGS) -dD - 2>/dev/null | awk '$$2 == "__SILICON_REVISION__" { print $$3 }')
+CHECKFLAGS += -D__SILICON_REVISION__=$(CHECKFLAGS_SILICON) -D__bfin__
+
+core-y   += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ arch/$(ARCH)/mach-common/
+
+# If we have a machine-specific directory, then include it in the build.
+ifneq ($(machine-y),)
+core-y   += arch/$(ARCH)/mach-$(MACHINE)/
+core-y   += arch/$(ARCH)/mach-$(MACHINE)/boards/
+endif
+
+ifeq ($(CONFIG_MPU),y)
+core-y	+= arch/$(ARCH)/kernel/cplb-mpu/
+else
+core-y	+= arch/$(ARCH)/kernel/cplb-nompu/
+endif
+
+drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/
+
+libs-y   += arch/$(ARCH)/lib/
+
+machdirs	:= $(patsubst %,arch/blackfin/mach-%/, $(machine-y))
+
+KBUILD_CFLAGS += -Iarch/$(ARCH)/include/
+KBUILD_CFLAGS += -Iarch/$(ARCH)/mach-$(MACHINE)/include
+
+KBUILD_CPPFLAGS	+= $(patsubst %,-I$(srctree)/%include,$(machdirs))
+
+CLEAN_FILES += \
+	arch/$(ARCH)/kernel/asm-offsets.s \
+
+archclean:
+	$(Q)$(MAKE) $(clean)=$(boot)
+
+INSTALL_PATH ?= /tftpboot
+boot := arch/$(ARCH)/boot
+BOOT_TARGETS = uImage uImage.bin uImage.bz2 uImage.gz uImage.lzma uImage.lzo uImage.xip
+PHONY += $(BOOT_TARGETS) install
+KBUILD_IMAGE := $(boot)/uImage
+
+all: uImage
+
+$(BOOT_TARGETS): vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+install:
+	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
+
+define archhelp
+  echo  '* vmImage         - Alias to selected kernel format (vmImage.gz by default)'
+  echo  '  vmImage.bin     - Uncompressed Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bin)'
+  echo  '  vmImage.bz2     - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)'
+  echo  '* vmImage.gz      - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)'
+  echo  '  vmImage.lzma    - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)'
+  echo  '  vmImage.lzo     - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzo)'
+  echo  '  vmImage.xip     - XIP Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.xip)'
+  echo  '  install         - Install kernel using'
+  echo  '                     (your) ~/bin/$(INSTALLKERNEL) or'
+  echo  '                     (distribution) PATH: $(INSTALLKERNEL) or'
+  echo  '                     install to $$(INSTALL_PATH)'
+endef
diff --git a/src/kernel/linux/v4.14/arch/blackfin/boot/.gitignore b/src/kernel/linux/v4.14/arch/blackfin/boot/.gitignore
new file mode 100644
index 0000000..1287a54
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/boot/.gitignore
@@ -0,0 +1,3 @@
+vmImage*
+vmlinux*
+uImage*
diff --git a/src/kernel/linux/v4.14/arch/blackfin/boot/Makefile b/src/kernel/linux/v4.14/arch/blackfin/boot/Makefile
new file mode 100644
index 0000000..3efaa09
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/boot/Makefile
@@ -0,0 +1,71 @@
+#
+# arch/blackfin/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+targets := uImage uImage.bin uImage.bz2 uImage.gz uImage.lzma uImage.lzo uImage.xip
+extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.xip
+
+ifeq ($(CONFIG_RAMKERNEL),y)
+UIMAGE_LOADADDR = $(CONFIG_BOOT_LOAD)
+else # CONFIG_ROMKERNEL must be set
+UIMAGE_LOADADDR = $(CONFIG_ROM_BASE)
+endif
+UIMAGE_ENTRYADDR = $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}')
+UIMAGE_NAME = '$(CPU_REV)-$(KERNELRELEASE)'
+UIMAGE_OPTS-$(CONFIG_ROMKERNEL) += -x
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,gzip)
+
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,bzip2)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzma)
+
+$(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzo)
+
+# The mkimage tool wants 64bytes prepended to the image
+quiet_cmd_mk_bin_xip = BIN     $@
+      cmd_mk_bin_xip = ( printf '%64s' | tr ' ' '\377' ; cat $< ) > $@
+$(obj)/vmlinux.bin.xip: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,mk_bin_xip)
+
+$(obj)/uImage.bin: $(obj)/vmlinux.bin
+	$(call if_changed,uimage,none)
+
+$(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2
+	$(call if_changed,uimage,bzip2)
+
+$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz
+	$(call if_changed,uimage,gzip)
+
+$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma
+	$(call if_changed,uimage,lzma)
+
+$(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo
+	$(call if_changed,uimage,lzo)
+
+$(obj)/uImage.xip: $(obj)/vmlinux.bin.xip
+	$(call if_changed,uimage,none)
+
+suffix-y                      := bin
+suffix-$(CONFIG_KERNEL_GZIP)  := gz
+suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZMA)  := lzma
+suffix-$(CONFIG_KERNEL_LZO)   := lzo
+suffix-$(CONFIG_ROMKERNEL)    := xip
+
+$(obj)/uImage: $(obj)/uImage.$(suffix-y)
+	@ln -sf $(notdir $<) $@
+
+install:
+	sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
diff --git a/src/kernel/linux/v4.14/arch/blackfin/boot/install.sh b/src/kernel/linux/v4.14/arch/blackfin/boot/install.sh
new file mode 100644
index 0000000..e2c6e40
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/boot/install.sh
@@ -0,0 +1,57 @@
+#!/bin/sh
+#
+# arch/blackfin/boot/install.sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Adapted from code in arch/i386/boot/install.sh by Mike Frysinger
+#
+# "make install" script for Blackfin architecture
+#
+# Arguments:
+#   $1 - kernel version
+#   $2 - kernel image file
+#   $3 - kernel map file
+#   $4 - default install path (blank if root directory)
+#
+
+verify () {
+	if [ ! -f "$1" ]; then
+		echo ""                                                   1>&2
+		echo " *** Missing file: $1"                              1>&2
+		echo ' *** You need to run "make" before "make install".' 1>&2
+		echo ""                                                   1>&2
+		exit 1
+ 	fi
+}
+
+# Make sure the files actually exist
+verify "$2"
+verify "$3"
+
+# User may have a custom install script
+
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if which ${INSTALLKERNEL} >/dev/null 2>&1; then
+	exec ${INSTALLKERNEL} "$@"
+fi
+
+# Default install - same as make zlilo
+
+back_it_up() {
+	local file=$1
+	[ -f ${file} ] || return 0
+	local stamp=$(stat -c %Y ${file} 2>/dev/null)
+	mv ${file} ${file}.${stamp:-old}
+}
+
+back_it_up $4/uImage
+back_it_up $4/System.map
+
+cat $2 > $4/uImage
+cp $3 $4/System.map
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/BF518F-EZBRD_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/BF518F-EZBRD_defconfig
new file mode 100644
index 0000000..99c00d8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -0,0 +1,121 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF518=y
+CONFIG_IRQ_TIMER0=12
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_SCHEDULE_L1 is not set
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=m
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0x99B2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_BFIN=y
+CONFIG_BFIN_MAC=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_SDH_BFIN=y
+CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=y
+CONFIG_EXT2_FS=m
+# CONFIG_DNOTIFY is not set
+CONFIG_VFAT_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_UTF8=m
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_BFIN_PSEUDODBG_INSNS=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=m
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/BF526-EZBRD_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/BF526-EZBRD_defconfig
new file mode 100644
index 0000000..e66ba31
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -0,0 +1,158 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF526=y
+CONFIG_IRQ_TIMER0=12
+CONFIG_BFIN526_EZBRD=y
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_SCHEDULE_L1 is not set
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=m
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0x99B2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_SPI_NOR=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_BFIN=y
+CONFIG_BFIN_MAC=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_MON=y
+CONFIG_USB_STORAGE=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=y
+CONFIG_EXT2_FS=m
+# CONFIG_DNOTIFY is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_VFAT_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_UTF8=m
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_BFIN_PSEUDODBG_INSNS=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=m
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
new file mode 100644
index 0000000..d95658f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
@@ -0,0 +1,104 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_PREEMPT=y
+CONFIG_BF527=y
+CONFIG_BF_REV_0_2=y
+CONFIG_IRQ_TWI=7
+CONFIG_IRQ_PORTH_INTA=7
+CONFIG_IRQ_PORTH_INTB=7
+CONFIG_BFIN527_AD7160EVAL=y
+CONFIG_BF527_SPORT0_PORTF=y
+CONFIG_BF527_UART1_PORTG=y
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="bootargs=root=/dev/mtdblock0 rw clkin_hz=24000000 earlyprintk=serial,uart0,57600 console=tty0 console=ttyBF0,57600"
+CONFIG_CLKIN_HZ=24000000
+CONFIG_HZ_300=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_IP_CHECKSUM_L1=y
+CONFIG_SYSCALL_TAB_L1=y
+CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_1=0x5554
+CONFIG_BANK_3=0xFFC0
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_UNIX=y
+# CONFIG_WIRELESS is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7160=y
+CONFIG_TOUCHSCREEN_AD7160_FW=y
+# CONFIG_SERIO is not set
+# CONFIG_BFIN_DMA_INTERFACE is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_BFIN_OTP is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=400
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_BLACKFIN_VGA16 is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_G_SERIAL=y
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_CRC_CCITT=m
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
new file mode 100644
index 0000000..0207c58
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
@@ -0,0 +1,188 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF527=y
+CONFIG_BF_REV_0_2=y
+CONFIG_BFIN527_EZKIT_V2=y
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_SCHEDULE_L1 is not set
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0x99B2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR0=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_SPI_NOR=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_BFIN=y
+CONFIG_BFIN_MAC=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_ADP5520=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=y
+CONFIG_TOUCHSCREEN_AD7879_I2C=y
+CONFIG_INPUT_MISC=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+CONFIG_PMIC_ADP5520=y
+CONFIG_FB=y
+CONFIG_FB_BFIN_LQ035Q1=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_BLACKFIN_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_BF5XX_I2S=y
+CONFIG_SND_BF5XX_SOC_SSM2602=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_MON=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_BLACKFIN=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_ADP5520=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=y
+CONFIG_EXT2_FS=m
+# CONFIG_DNOTIFY is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_UDF_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_UTF8=m
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_BFIN_PSEUDODBG_INSNS=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/BF527-EZKIT_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/BF527-EZKIT_defconfig
new file mode 100644
index 0000000..99c131b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -0,0 +1,181 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF527=y
+CONFIG_BF_REV_0_1=y
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_SCHEDULE_L1 is not set
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0x99B2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR0=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_SPI_NOR=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_BFIN=y
+CONFIG_BFIN_MAC=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+CONFIG_FB=y
+CONFIG_FB_BFIN_T350MCQB=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_LTV350QV=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_BLACKFIN_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_BF5XX_I2S=y
+CONFIG_SND_BF5XX_SOC_SSM2602=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_MON=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_MUSB_BLACKFIN=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=y
+CONFIG_EXT2_FS=m
+# CONFIG_DNOTIFY is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_UDF_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_UTF8=m
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_BFIN_PSEUDODBG_INSNS=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/BF527-TLL6527M_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/BF527-TLL6527M_defconfig
new file mode 100644
index 0000000..cdeb518
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/BF527-TLL6527M_defconfig
@@ -0,0 +1,178 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCALVERSION="DEV_0-1_pre2010"
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF527=y
+CONFIG_BF_REV_0_2=y
+CONFIG_BFIN527_TLL6527M=y
+CONFIG_BF527_UART1_PORTG=y
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+CONFIG_BOOT_LOAD=0x400000
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_SCHEDULE_L1 is not set
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_DMA_UNCACHED_2M=y
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_0=0xFFC2
+CONFIG_BANK_1=0xFFC2
+CONFIG_BANK_2=0xFFC2
+CONFIG_BANK_3=0xFFC2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR0=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_GPIO_ADDR=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_BFIN_MAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=y
+CONFIG_INPUT_ADXL34X=y
+# CONFIG_SERIO is not set
+CONFIG_BFIN_PPI=m
+CONFIG_BFIN_SIMPLE_TIMER=m
+CONFIG_BFIN_SPORT=m
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_BFIN_JTAG_COMM=m
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_SMBUS=y
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_BLACKFIN_CAM=m
+CONFIG_OV9655=y
+CONFIG_FB=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_6x11=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_BLACKFIN_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SOC=y
+CONFIG_SND_BF5XX_I2S=y
+CONFIG_SND_BF5XX_SOC_SSM2602=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=y
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_UTF8=m
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC7=m
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/BF533-EZKIT_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/BF533-EZKIT_defconfig
new file mode 100644
index 0000000..ed7d2c0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -0,0 +1,114 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BFIN533_EZKIT=y
+CONFIG_TIMER0=11
+CONFIG_CLKIN_HZ=27000000
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=m
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0xAAC2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRTTY_SIR=m
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMC91X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT=m
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_DNOTIFY is not set
+CONFIG_JFFS2_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_BFIN_PSEUDODBG_INSNS=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/BF533-STAMP_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/BF533-STAMP_defconfig
new file mode 100644
index 0000000..0c241f4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -0,0 +1,124 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_TIMER0=11
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=m
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0xAAC2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMC91X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_GPIO=m
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+CONFIG_FB=m
+CONFIG_FIRMWARE_EDID=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SOC=m
+CONFIG_SND_BF5XX_I2S=m
+CONFIG_SND_BF5XX_SOC_AD73311=m
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_DNOTIFY is not set
+CONFIG_JFFS2_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_BFIN_PSEUDODBG_INSNS=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/BF537-STAMP_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/BF537-STAMP_defconfig
new file mode 100644
index 0000000..e5360b3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -0,0 +1,136 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF537=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=m
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0x99B2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_BFIN=m
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR1=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_BFIN=y
+CONFIG_BFIN_MAC=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_BLACKFIN_TWI=m
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+CONFIG_FB=m
+CONFIG_FIRMWARE_EDID=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SOC=m
+CONFIG_SND_BF5XX_I2S=m
+CONFIG_SND_BF5XX_SOC_AD73311=m
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_DNOTIFY is not set
+CONFIG_JFFS2_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_BFIN_PSEUDODBG_INSNS=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/BF538-EZKIT_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/BF538-EZKIT_defconfig
new file mode 100644
index 0000000..60f6fb8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -0,0 +1,133 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF538=y
+CONFIG_IRQ_TIMER0=12
+CONFIG_IRQ_TIMER1=12
+CONFIG_IRQ_TIMER2=12
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0x99B2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_BFIN=m
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_NAND=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+CONFIG_PHYLIB=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=y
+CONFIG_TOUCHSCREEN_AD7879_SPI=y
+CONFIG_INPUT_MISC=y
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_BFIN_JTAG_COMM=m
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART0=y
+CONFIG_SERIAL_BFIN_UART1=y
+CONFIG_SERIAL_BFIN_UART2=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BLACKFIN_TWI=m
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+CONFIG_FB=m
+CONFIG_FB_BFIN_LQ035Q1=m
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_DNOTIFY is not set
+CONFIG_JFFS2_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_SMB_FS=m
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_BFIN_PSEUDODBG_INSNS=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/BF548-EZKIT_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/BF548-EZKIT_defconfig
new file mode 100644
index 0000000..38cb17d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -0,0 +1,207 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF548_std=y
+CONFIG_IRQ_TIMER0=11
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_SCHEDULE_L1 is not set
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=m
+CONFIG_DMA_UNCACHED_2M=y
+CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
+CONFIG_BANK_3=0x99B2
+CONFIG_EBIU_MBSCTLVAL=0x0
+CONFIG_EBIU_MODEVAL=0x1
+CONFIG_EBIU_FCTLVAL=0x6
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_BFIN=m
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR3=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_FW_LOADER=m
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_BF5XX=y
+# CONFIG_MTD_NAND_BF5XX_HWECC is not set
+CONFIG_MTD_SPI_NOR=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_PATA_BF54X=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_BFIN=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7877=m
+CONFIG_INPUT_MISC=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_BF54X_LQ043=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_6x11=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_BLACKFIN_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SOC=y
+CONFIG_SND_BF5XX_AC97=y
+CONFIG_SND_BF5XX_SOC_AD1980=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_MON=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_BLACKFIN=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=m
+CONFIG_SDH_BFIN=y
+CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_DNOTIFY is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_NTFS_FS=m
+CONFIG_NTFS_RW=y
+CONFIG_JFFS2_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_CIFS=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_UTF8=m
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_BFIN_PSEUDODBG_INSNS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/BF561-ACVILON_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/BF561-ACVILON_defconfig
new file mode 100644
index 0000000..78f6bc7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/BF561-ACVILON_defconfig
@@ -0,0 +1,149 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF561=y
+CONFIG_BF_REV_0_5=y
+CONFIG_IRQ_TIMER0=10
+CONFIG_BFIN561_ACVILON=y
+# CONFIG_BF561_COREB is not set
+CONFIG_CLKIN_HZ=12000000
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_DMA_UNCACHED_4M=y
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_0=0x99b2
+CONFIG_BANK_1=0x3350
+CONFIG_BANK_3=0xAAC2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_PHRAM=y
+CONFIG_MTD_BLOCK2MTD=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_PIO=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_PCA_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_SENSORS_LM75=y
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_BF5XX_I2S=y
+CONFIG_SND_BF5XX_SPORT_NUM=1
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_MON=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=866
+CONFIG_FAT_DEFAULT_IOCHARSET="cp1251"
+CONFIG_NTFS_FS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_ZLIB is not set
+CONFIG_JFFS2_LZO=y
+# CONFIG_JFFS2_RTIME is not set
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+CONFIG_CRAMFS=y
+CONFIG_MINIX_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_DEFAULT="cp1251"
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_UTF8=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_CPLB_INFO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig
new file mode 100644
index 0000000..fac8bb5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig
@@ -0,0 +1,112 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF561=y
+CONFIG_SMP=y
+CONFIG_IRQ_TIMER0=10
+CONFIG_CLKIN_HZ=30000000
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=m
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0xAAC2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRTTY_SIR=m
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMC91X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT=m
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_JFFS2_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_BFIN_PSEUDODBG_INSNS=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/BF561-EZKIT_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/BF561-EZKIT_defconfig
new file mode 100644
index 0000000..2a2e4d0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -0,0 +1,114 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF561=y
+CONFIG_IRQ_TIMER0=10
+CONFIG_CLKIN_HZ=30000000
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=m
+CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
+CONFIG_BFIN_L2_DCACHEABLE=y
+CONFIG_BFIN_L2_WRITETHROUGH=y
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0xAAC2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRTTY_SIR=m
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMC91X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT=m
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_JFFS2_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_BFIN_PSEUDODBG_INSNS=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/BF609-EZKIT_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/BF609-EZKIT_defconfig
new file mode 100644
index 0000000..3ce77f0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/BF609-EZKIT_defconfig
@@ -0,0 +1,154 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF609=y
+CONFIG_PINT1_ASSIGN=0x01010000
+CONFIG_PINT2_ASSIGN=0x07000101
+CONFIG_PINT3_ASSIGN=0x02020303
+CONFIG_IP_CHECKSUM_L1=y
+CONFIG_SYSCALL_TAB_L1=y
+CONFIG_CPLB_SWITCH_TAB_L1=y
+# CONFIG_APP_STACK_L1 is not set
+# CONFIG_BFIN_INS_LOWOVERHEAD is not set
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_PM_BFIN_WAKE_PE12=y
+CONFIG_PM_BFIN_WAKE_PE12_POL=1
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_CAN=y
+CONFIG_CAN_BFIN=y
+CONFIG_IRDA=y
+CONFIG_IRTTY_SIR=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_FW_LOADER=m
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_IEEE1588=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_BFIN_ROTARY=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_SIMPLE_TIMER=m
+# CONFIG_BFIN_CRC is not set
+CONFIG_BFIN_LINKPORT=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+CONFIG_SPI=y
+CONFIG_SPI_ADI_V3=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_PINCTRL_MCP23S08=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=m
+CONFIG_USB=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_BLACKFIN=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_ZERO=y
+CONFIG_MMC=y
+CONFIG_SDH_BFIN=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_JFFS2_FS=m
+CONFIG_UBIFS_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_BFIN_PSEUDODBG_INSNS=y
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_BFIN_CRC=m
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/BlackStamp_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/BlackStamp_defconfig
new file mode 100644
index 0000000..f4a9200
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/BlackStamp_defconfig
@@ -0,0 +1,108 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF532=y
+CONFIG_BF_REV_0_5=y
+CONFIG_BLACKSTAMP=y
+CONFIG_TIMER0=11
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_ROMKERNEL=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0xAAC2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
+CONFIG_EEPROM_AT25=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_GPIO=m
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_SPI_SPIDEV=m
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_SMB_FS=y
+CONFIG_CIFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_UTF8=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_CRC_CCITT=m
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF527_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF527_defconfig
new file mode 100644
index 0000000..1902bb0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF527_defconfig
@@ -0,0 +1,129 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_KERNEL_LZMA=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+CONFIG_RD_LZMA=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF527=y
+CONFIG_BF_REV_0_1=y
+CONFIG_IRQ_TIMER0=12
+CONFIG_BFIN527_BLUETECHNIX_CM=y
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_SCHEDULE_L1 is not set
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0xFFC0
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_GPIO_ADDR=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_BFIN_MAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART0=y
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_BLACKFIN_TWI=m
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+CONFIG_USB=m
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_MON=m
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_PERIPHERAL=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_STORAGE=m
+CONFIG_USB_GADGET=m
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_G_PRINTER=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_SMB_FS=m
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_FS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF533_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF533_defconfig
new file mode 100644
index 0000000..9a5716d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF533_defconfig
@@ -0,0 +1,76 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_KERNEL_LZMA=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+CONFIG_RD_LZMA=y
+CONFIG_EXPERT=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_BFIN533_BLUETECHNIX_CM=y
+CONFIG_TIMER0=11
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_IP_CHECKSUM_L1=y
+CONFIG_SYSCALL_TAB_L1=y
+CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0xFFC2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SPI=m
+# CONFIG_DNOTIFY is not set
+CONFIG_VFAT_FS=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF537E_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF537E_defconfig
new file mode 100644
index 0000000..6845928
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF537E_defconfig
@@ -0,0 +1,107 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_KERNEL_LZMA=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+CONFIG_RD_LZMA=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_BF537=y
+CONFIG_IRQ_TIMER0=12
+CONFIG_BFIN537_BLUETECHNIX_CM_E=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_IP_CHECKSUM_L1=y
+CONFIG_SYSCALL_TAB_L1=y
+CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0xFFC2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_GPIO_ADDR=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_BFIN_MAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART0=y
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_ETH=m
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SPI=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF537U_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF537U_defconfig
new file mode 100644
index 0000000..d9915e9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF537U_defconfig
@@ -0,0 +1,96 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_KERNEL_LZMA=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+CONFIG_RD_LZMA=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_BF537=y
+CONFIG_IRQ_TIMER0=12
+CONFIG_BFIN537_BLUETECHNIX_CM_U=y
+CONFIG_CLKIN_HZ=30000000
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_IP_CHECKSUM_L1=y
+CONFIG_SYSCALL_TAB_L1=y
+CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_2=0xFFC2
+CONFIG_BANK_3=0xFFC2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_GPIO_ADDR=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART0=y
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=y
+CONFIG_MMC=y
+CONFIG_MMC_SPI=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF548_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF548_defconfig
new file mode 100644
index 0000000..92d8130
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF548_defconfig
@@ -0,0 +1,170 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_KERNEL_LZMA=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+CONFIG_RD_LZMA=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_BF548_std=y
+CONFIG_BF_REV_ANY=y
+CONFIG_IRQ_TIMER0=11
+CONFIG_BFIN548_BLUETECHNIX_CM=y
+# CONFIG_DEB_DMA_URGENT is not set
+# CONFIG_SCHEDULE_L1 is not set
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
+CONFIG_BANK_1=0x5554
+CONFIG_EBIU_MBSCTLVAL=0x0
+CONFIG_EBIU_MODEVAL=0x1
+CONFIG_EBIU_FCTLVAL=0x6
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=m
+CONFIG_BLK_DEV_SD=m
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_PIO=y
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=m
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_MON=m
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_PERIPHERAL=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_STORAGE=m
+CONFIG_USB_GADGET=m
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_G_PRINTER=m
+CONFIG_MMC=m
+CONFIG_SDH_BFIN=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=m
+CONFIG_EXT2_FS=m
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_NTFS_FS=m
+CONFIG_NTFS_RW=y
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_CIFS=m
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_DEBUG_FS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF561_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF561_defconfig
new file mode 100644
index 0000000..fa8d911
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/CM-BF561_defconfig
@@ -0,0 +1,104 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_KERNEL_LZMA=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+CONFIG_RD_LZMA=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_BF561=y
+CONFIG_IRQ_TIMER0=10
+CONFIG_BFIN561_BLUETECHNIX_CM=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_IP_CHECKSUM_L1=y
+CONFIG_SYSCALL_TAB_L1=y
+CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0xFFC2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+CONFIG_PHYLIB=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMSC911X=m
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_G_PRINTER=m
+CONFIG_MMC=y
+CONFIG_MMC_SPI=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/DNP5370_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/DNP5370_defconfig
new file mode 100644
index 0000000..8860059
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/DNP5370_defconfig
@@ -0,0 +1,118 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCALVERSION="DNP5370"
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_SLOB=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_BF537=y
+CONFIG_BF_REV_0_3=y
+CONFIG_DNP5370=y
+CONFIG_IRQ_ERROR=7
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_C_CDPRIO=y
+CONFIG_C_AMBEN_B0_B1_B2=y
+CONFIG_PM=y
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_LLC2=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=1
+CONFIG_MTD_BLOCK=y
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_ABSENT=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_UCLINUX=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_BLOCK2MTD=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_BFIN_MAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_BFIN_DMA_INTERFACE is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_BFIN_JTAG_COMM=y
+CONFIG_BFIN_JTAG_COMM_CONSOLE=y
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART0=y
+CONFIG_LEGACY_PTY_COUNT=64
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_SENSORS_LM75=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+CONFIG_DMADEVICES=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BOTH=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_OBJECTS=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_DEBUG_KOBJECT=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_LIST=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_PAGE_POISONING=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_CPLB_INFO=y
+CONFIG_CRC_CCITT=y
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/H8606_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/H8606_defconfig
new file mode 100644
index 0000000..0ff97d8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/H8606_defconfig
@@ -0,0 +1,87 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_BF532=y
+CONFIG_BF_REV_0_5=y
+CONFIG_H8606_HVSISTEMAS=y
+CONFIG_TIMER0=11
+# CONFIG_CACHELINE_ALIGNED_L1 is not set
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_C_CDPRIO=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRTTY_SIR=m
+# CONFIG_WIRELESS is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
+CONFIG_EEPROM_AT25=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_DM9000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_WATCHDOG=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_BFIN=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_DNOTIFY is not set
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NLS=m
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_CPLB_INFO=y
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/IP0X_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/IP0X_defconfig
new file mode 100644
index 0000000..9e3ae4b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/IP0X_defconfig
@@ -0,0 +1,91 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_BF532=y
+CONFIG_BF_REV_0_5=y
+CONFIG_BFIN532_IP0X=y
+CONFIG_TIMER0=11
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+# CONFIG_BFIN_ICACHE is not set
+# CONFIG_BFIN_DCACHE is not set
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_0=0xffc2
+CONFIG_BANK_1=0xffc2
+CONFIG_BANK_2=0xffc2
+CONFIG_BANK_3=0xffc2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_XT_MATCH_MAC=y
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_MANGLE=y
+# CONFIG_WIRELESS is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_UCLINUX=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_NAND=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_DM9000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_HW_RANDOM=y
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_USB=y
+CONFIG_USB_OTG_WHITELIST=y
+CONFIG_USB_MON=y
+CONFIG_USB_ISP1362_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_CPLB_INFO=y
+CONFIG_CRC_CCITT=y
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/PNAV-10_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/PNAV-10_defconfig
new file mode 100644
index 0000000..c792681
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/PNAV-10_defconfig
@@ -0,0 +1,111 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF537=y
+CONFIG_IRQ_TIMER0=12
+CONFIG_PNAV10=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_IP_CHECKSUM_L1=y
+CONFIG_SYSCALL_TAB_L1=y
+CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_1=0x33B0
+CONFIG_BANK_2=0x33B0
+CONFIG_BANK_3=0x99B2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_UCLINUX=y
+CONFIG_MTD_NAND=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_BFIN_MAC=y
+# CONFIG_BFIN_MAC_USE_L1 is not set
+CONFIG_BFIN_TX_DESC_NUM=100
+CONFIG_BFIN_RX_DESC_NUM=100
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7877=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=y
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART0=y
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_SOUND=y
+CONFIG_SND=m
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+CONFIG_SOUND_PRIME=y
+# CONFIG_HID is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_DNOTIFY is not set
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_SMB_FS=m
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+# CONFIG_ACCESS_CHECK is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=m
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/SRV1_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/SRV1_defconfig
new file mode 100644
index 0000000..23fdc57
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/SRV1_defconfig
@@ -0,0 +1,88 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF537=y
+CONFIG_IRQ_TIMER0=12
+CONFIG_BOOT_LOAD=0x400000
+CONFIG_CLKIN_HZ=22118400
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_DMA_UNCACHED_2M=y
+CONFIG_C_CDPRIO=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRTTY_SIR=m
+# CONFIG_WIRELESS is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_UCLINUX=y
+CONFIG_MTD_NAND=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
+CONFIG_EEPROM_AT25=m
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=y
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_HWMON=m
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+# CONFIG_HID is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_DNOTIFY is not set
+CONFIG_JFFS2_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_SMB_FS=m
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_CPLB_INFO=y
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/TCM-BF518_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/TCM-BF518_defconfig
new file mode 100644
index 0000000..e289594
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/TCM-BF518_defconfig
@@ -0,0 +1,131 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_KERNEL_LZMA=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+CONFIG_RD_LZMA=y
+CONFIG_EXPERT=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF518=y
+CONFIG_BF_REV_0_1=y
+CONFIG_BFIN518F_TCM=y
+CONFIG_IRQ_TIMER0=12
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_SCHEDULE_L1 is not set
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=m
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0x99B2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_BFIN_MAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_SERIO is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_BFIN_JTAG_COMM=m
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_SPI=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=y
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_VFAT_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_UTF8=m
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=m
diff --git a/src/kernel/linux/v4.14/arch/blackfin/configs/TCM-BF537_defconfig b/src/kernel/linux/v4.14/arch/blackfin/configs/TCM-BF537_defconfig
new file mode 100644
index 0000000..39e85cc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/configs/TCM-BF537_defconfig
@@ -0,0 +1,95 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_KERNEL_LZMA=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+CONFIG_RD_LZMA=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_BF537=y
+CONFIG_IRQ_TIMER0=12
+CONFIG_BFIN537_BLUETECHNIX_TCM=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_IP_CHECKSUM_L1=y
+CONFIG_SYSCALL_TAB_L1=y
+CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_3=0xFFC2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_GPIO_ADDR=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_BFIN_MAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART0=y
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_BFIN5XX=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=y
+CONFIG_MMC=y
+CONFIG_MMC_SPI=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/Kbuild b/src/kernel/linux/v4.14/arch/blackfin/include/asm/Kbuild
new file mode 100644
index 0000000..fe73697
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/Kbuild
@@ -0,0 +1,28 @@
+generic-y += bugs.h
+generic-y += current.h
+generic-y += device.h
+generic-y += div64.h
+generic-y += emergency-restart.h
+generic-y += extable.h
+generic-y += fb.h
+generic-y += futex.h
+generic-y += hw_irq.h
+generic-y += irq_regs.h
+generic-y += irq_work.h
+generic-y += kdebug.h
+generic-y += kmap_types.h
+generic-y += kprobes.h
+generic-y += local.h
+generic-y += local64.h
+generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
+generic-y += percpu.h
+generic-y += pgalloc.h
+generic-y += preempt.h
+generic-y += serial.h
+generic-y += topology.h
+generic-y += trace_clock.h
+generic-y += unaligned.h
+generic-y += user.h
+generic-y += word-at-a-time.h
+generic-y += xor.h
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/asm-offsets.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/asm-offsets.h
new file mode 100644
index 0000000..d370ee3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/asm-offsets.h
@@ -0,0 +1 @@
+#include <generated/asm-offsets.h>
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/atomic.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/atomic.h
new file mode 100644
index 0000000..63c7dec
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/atomic.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2004-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ARCH_BLACKFIN_ATOMIC__
+#define __ARCH_BLACKFIN_ATOMIC__
+
+#include <asm/cmpxchg.h>
+
+#ifdef CONFIG_SMP
+
+#include <asm/barrier.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+
+asmlinkage int __raw_uncached_fetch_asm(const volatile int *ptr);
+asmlinkage int __raw_atomic_add_asm(volatile int *ptr, int value);
+asmlinkage int __raw_atomic_xadd_asm(volatile int *ptr, int value);
+
+asmlinkage int __raw_atomic_and_asm(volatile int *ptr, int value);
+asmlinkage int __raw_atomic_or_asm(volatile int *ptr, int value);
+asmlinkage int __raw_atomic_xor_asm(volatile int *ptr, int value);
+asmlinkage int __raw_atomic_test_asm(const volatile int *ptr, int value);
+
+#define atomic_read(v) __raw_uncached_fetch_asm(&(v)->counter)
+
+#define atomic_add_return(i, v) __raw_atomic_add_asm(&(v)->counter, i)
+#define atomic_sub_return(i, v) __raw_atomic_add_asm(&(v)->counter, -(i))
+
+#define atomic_fetch_add(i, v) __raw_atomic_xadd_asm(&(v)->counter, i)
+#define atomic_fetch_sub(i, v) __raw_atomic_xadd_asm(&(v)->counter, -(i))
+
+#define atomic_or(i, v)  (void)__raw_atomic_or_asm(&(v)->counter, i)
+#define atomic_and(i, v) (void)__raw_atomic_and_asm(&(v)->counter, i)
+#define atomic_xor(i, v) (void)__raw_atomic_xor_asm(&(v)->counter, i)
+
+#define atomic_fetch_or(i, v)  __raw_atomic_or_asm(&(v)->counter, i)
+#define atomic_fetch_and(i, v) __raw_atomic_and_asm(&(v)->counter, i)
+#define atomic_fetch_xor(i, v) __raw_atomic_xor_asm(&(v)->counter, i)
+
+#endif
+
+#include <asm-generic/atomic.h>
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/barrier.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/barrier.h
new file mode 100644
index 0000000..7cca51c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/barrier.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *               Tony Kou (tonyko@lineo.ca)
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _BLACKFIN_BARRIER_H
+#define _BLACKFIN_BARRIER_H
+
+#include <asm/cache.h>
+
+#define nop()  __asm__ __volatile__ ("nop;\n\t" : : )
+
+/*
+ * Force strict CPU ordering.
+ */
+#ifdef CONFIG_SMP
+
+#ifdef __ARCH_SYNC_CORE_DCACHE
+/* Force Core data cache coherence */
+# define mb()	do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0)
+# define rmb()	do { barrier(); smp_check_barrier(); } while (0)
+# define wmb()	do { barrier(); smp_mark_barrier(); } while (0)
+/*
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like this where there are no data dependencies.
+ */
+# define read_barrier_depends()	do { barrier(); smp_check_barrier(); } while (0)
+#endif
+
+#endif /* !CONFIG_SMP */
+
+#define __smp_mb__before_atomic()	barrier()
+#define __smp_mb__after_atomic()	barrier()
+
+#include <asm-generic/barrier.h>
+
+#endif /* _BLACKFIN_BARRIER_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin-global.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin-global.h
new file mode 100644
index 0000000..dc47d79
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin-global.h
@@ -0,0 +1,95 @@
+/*
+ * Global extern defines for blackfin
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BFIN_GLOBAL_H_
+#define _BFIN_GLOBAL_H_
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/types.h>
+
+#if defined(CONFIG_DMA_UNCACHED_32M)
+# define DMA_UNCACHED_REGION (32 * 1024 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_16M)
+# define DMA_UNCACHED_REGION (16 * 1024 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_8M)
+# define DMA_UNCACHED_REGION (8 * 1024 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_4M)
+# define DMA_UNCACHED_REGION (4 * 1024 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_2M)
+# define DMA_UNCACHED_REGION (2 * 1024 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_1M)
+# define DMA_UNCACHED_REGION (1024 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_512K)
+# define DMA_UNCACHED_REGION (512 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_256K)
+# define DMA_UNCACHED_REGION (256 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_128K)
+# define DMA_UNCACHED_REGION (128 * 1024)
+#else
+# define DMA_UNCACHED_REGION (0)
+#endif
+
+extern void bfin_setup_caches(unsigned int cpu);
+extern void bfin_setup_cpudata(unsigned int cpu);
+
+extern unsigned long get_cclk(void);
+extern unsigned long get_sclk(void);
+#ifdef CONFIG_BF60x
+extern unsigned long get_sclk0(void);
+extern unsigned long get_sclk1(void);
+extern unsigned long get_dclk(void);
+#endif
+extern unsigned long sclk_to_usecs(unsigned long sclk);
+extern unsigned long usecs_to_sclk(unsigned long usecs);
+
+struct pt_regs;
+#if defined(CONFIG_DEBUG_VERBOSE)
+extern void dump_bfin_process(struct pt_regs *regs);
+extern void dump_bfin_mem(struct pt_regs *regs);
+extern void dump_bfin_trace_buffer(void);
+#else
+#define dump_bfin_process(regs)
+#define dump_bfin_mem(regs)
+#define dump_bfin_trace_buffer()
+#endif
+
+extern void *l1_data_A_sram_alloc(size_t);
+extern void *l1_data_B_sram_alloc(size_t);
+extern void *l1_inst_sram_alloc(size_t);
+extern void *l1_data_sram_alloc(size_t);
+extern void *l1_data_sram_zalloc(size_t);
+extern void *l2_sram_alloc(size_t);
+extern void *l2_sram_zalloc(size_t);
+extern int l1_data_A_sram_free(const void*);
+extern int l1_data_B_sram_free(const void*);
+extern int l1_inst_sram_free(const void*);
+extern int l1_data_sram_free(const void*);
+extern int l2_sram_free(const void *);
+extern int sram_free(const void*);
+
+#define L1_INST_SRAM		0x00000001
+#define L1_DATA_A_SRAM		0x00000002
+#define L1_DATA_B_SRAM		0x00000004
+#define L1_DATA_SRAM		0x00000006
+#define L2_SRAM			0x00000008
+extern void *sram_alloc_with_lsl(size_t, unsigned long);
+extern int sram_free_with_lsl(const void*);
+
+extern void *isram_memcpy(void *dest, const void *src, size_t n);
+
+extern const char bfin_board_name[];
+
+extern unsigned long bfin_sic_iwr[];
+extern unsigned vr_wakeup;
+extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */
+
+#endif
+
+#endif				/* _BLACKFIN_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin-lq035q1.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin-lq035q1.h
new file mode 100644
index 0000000..8368951
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin-lq035q1.h
@@ -0,0 +1,40 @@
+/*
+ * Blackfin LCD Framebuffer driver SHARP LQ035Q1DH02
+ *
+ * Copyright 2008-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef BFIN_LQ035Q1_H
+#define BFIN_LQ035Q1_H
+
+/*
+ * LCD Modes
+ */
+#define LQ035_RL	(0 << 8)	/* Right -> Left Scan */
+#define LQ035_LR	(1 << 8)	/* Left -> Right Scan */
+#define LQ035_TB	(1 << 9)	/* Top -> Botton Scan */
+#define LQ035_BT	(0 << 9)	/* Botton -> Top Scan */
+#define LQ035_BGR	(1 << 11)	/* Use BGR format */
+#define LQ035_RGB	(0 << 11)	/* Use RGB format */
+#define LQ035_NORM	(1 << 13)	/* Reversal */
+#define LQ035_REV	(0 << 13)	/* Reversal */
+
+/*
+ * PPI Modes
+ */
+
+#define USE_RGB565_16_BIT_PPI	1
+#define USE_RGB565_8_BIT_PPI	2
+#define USE_RGB888_8_BIT_PPI	3
+
+struct bfin_lq035q1fb_disp_info {
+
+	unsigned	mode;
+	unsigned	ppi_mode;
+	/* GPIOs */
+	int		use_bl;
+	unsigned 	gpio_bl;
+};
+
+#endif /* BFIN_LQ035Q1_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin5xx_spi.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin5xx_spi.h
new file mode 100644
index 0000000..fb95c85
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin5xx_spi.h
@@ -0,0 +1,86 @@
+/*
+ * Blackfin On-Chip SPI Driver
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _SPI_CHANNEL_H_
+#define _SPI_CHANNEL_H_
+
+#define MIN_SPI_BAUD_VAL	2
+
+#define BIT_CTL_ENABLE      0x4000
+#define BIT_CTL_OPENDRAIN   0x2000
+#define BIT_CTL_MASTER      0x1000
+#define BIT_CTL_CPOL        0x0800
+#define BIT_CTL_CPHA        0x0400
+#define BIT_CTL_LSBF        0x0200
+#define BIT_CTL_WORDSIZE    0x0100
+#define BIT_CTL_EMISO       0x0020
+#define BIT_CTL_PSSE        0x0010
+#define BIT_CTL_GM          0x0008
+#define BIT_CTL_SZ          0x0004
+#define BIT_CTL_RXMOD       0x0000
+#define BIT_CTL_TXMOD       0x0001
+#define BIT_CTL_TIMOD_DMA_TX 0x0003
+#define BIT_CTL_TIMOD_DMA_RX 0x0002
+#define BIT_CTL_SENDOPT     0x0004
+#define BIT_CTL_TIMOD       0x0003
+
+#define BIT_STAT_SPIF       0x0001
+#define BIT_STAT_MODF       0x0002
+#define BIT_STAT_TXE        0x0004
+#define BIT_STAT_TXS        0x0008
+#define BIT_STAT_RBSY       0x0010
+#define BIT_STAT_RXS        0x0020
+#define BIT_STAT_TXCOL      0x0040
+#define BIT_STAT_CLR        0xFFFF
+
+#define BIT_STU_SENDOVER    0x0001
+#define BIT_STU_RECVFULL    0x0020
+
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+
+/*
+ * bfin spi registers layout
+ */
+struct bfin_spi_regs {
+	__BFP(ctl);
+	__BFP(flg);
+	__BFP(stat);
+	__BFP(tdbr);
+	__BFP(rdbr);
+	__BFP(baud);
+	__BFP(shadow);
+};
+
+#undef __BFP
+
+#define MAX_CTRL_CS          8  /* cs in spi controller */
+
+/* device.platform_data for SSP controller devices */
+struct bfin5xx_spi_master {
+	u16 num_chipselect;
+	u8 enable_dma;
+	u16 pin_req[7];
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct bfin5xx_spi_chip {
+	u16 ctl_reg;
+	u8 enable_dma;
+	u16 cs_chg_udelay; /* Some devices require 16-bit delays */
+	/* Value to send if no TX value is supplied, usually 0x0 or 0xFFFF */
+	u16 idle_tx_val;
+	u8 pio_interrupt; /* Enable spi data irq */
+};
+
+#endif /* _SPI_CHANNEL_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_can.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_can.h
new file mode 100644
index 0000000..b1492e0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_can.h
@@ -0,0 +1,728 @@
+/*
+ * bfin_can.h - interface to Blackfin CANs
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_CAN_H__
+#define __ASM_BFIN_CAN_H__
+
+/*
+ * transmit and receive channels
+ */
+#define TRANSMIT_CHL            24
+#define RECEIVE_STD_CHL         0
+#define RECEIVE_EXT_CHL         4
+#define RECEIVE_RTR_CHL         8
+#define RECEIVE_EXT_RTR_CHL     12
+#define MAX_CHL_NUMBER          32
+
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+
+/*
+ * bfin can registers layout
+ */
+struct bfin_can_mask_regs {
+	__BFP(aml);
+	__BFP(amh);
+};
+
+struct bfin_can_channel_regs {
+	/* data[0,2,4,6] -> data{0,1,2,3} while data[1,3,5,7] is padding */
+	u16 data[8];
+	__BFP(dlc);
+	__BFP(tsv);
+	__BFP(id0);
+	__BFP(id1);
+};
+
+struct bfin_can_regs {
+	/*
+	 * global control and status registers
+	 */
+	__BFP(mc1);           /* offset 0x00 */
+	__BFP(md1);           /* offset 0x04 */
+	__BFP(trs1);          /* offset 0x08 */
+	__BFP(trr1);          /* offset 0x0c */
+	__BFP(ta1);           /* offset 0x10 */
+	__BFP(aa1);           /* offset 0x14 */
+	__BFP(rmp1);          /* offset 0x18 */
+	__BFP(rml1);          /* offset 0x1c */
+	__BFP(mbtif1);        /* offset 0x20 */
+	__BFP(mbrif1);        /* offset 0x24 */
+	__BFP(mbim1);         /* offset 0x28 */
+	__BFP(rfh1);          /* offset 0x2c */
+	__BFP(opss1);         /* offset 0x30 */
+	u32 __pad1[3];
+	__BFP(mc2);           /* offset 0x40 */
+	__BFP(md2);           /* offset 0x44 */
+	__BFP(trs2);          /* offset 0x48 */
+	__BFP(trr2);          /* offset 0x4c */
+	__BFP(ta2);           /* offset 0x50 */
+	__BFP(aa2);           /* offset 0x54 */
+	__BFP(rmp2);          /* offset 0x58 */
+	__BFP(rml2);          /* offset 0x5c */
+	__BFP(mbtif2);        /* offset 0x60 */
+	__BFP(mbrif2);        /* offset 0x64 */
+	__BFP(mbim2);         /* offset 0x68 */
+	__BFP(rfh2);          /* offset 0x6c */
+	__BFP(opss2);         /* offset 0x70 */
+	u32 __pad2[3];
+	__BFP(clock);         /* offset 0x80 */
+	__BFP(timing);        /* offset 0x84 */
+	__BFP(debug);         /* offset 0x88 */
+	__BFP(status);        /* offset 0x8c */
+	__BFP(cec);           /* offset 0x90 */
+	__BFP(gis);           /* offset 0x94 */
+	__BFP(gim);           /* offset 0x98 */
+	__BFP(gif);           /* offset 0x9c */
+	__BFP(control);       /* offset 0xa0 */
+	__BFP(intr);          /* offset 0xa4 */
+	__BFP(version);       /* offset 0xa8 */
+	__BFP(mbtd);          /* offset 0xac */
+	__BFP(ewr);           /* offset 0xb0 */
+	__BFP(esr);           /* offset 0xb4 */
+	u32 __pad3[2];
+	__BFP(ucreg);         /* offset 0xc0 */
+	__BFP(uccnt);         /* offset 0xc4 */
+	__BFP(ucrc);          /* offset 0xc8 */
+	__BFP(uccnf);         /* offset 0xcc */
+	u32 __pad4[1];
+	__BFP(version2);      /* offset 0xd4 */
+	u32 __pad5[10];
+
+	/*
+	 * channel(mailbox) mask and message registers
+	 */
+	struct bfin_can_mask_regs msk[MAX_CHL_NUMBER];    /* offset 0x100 */
+	struct bfin_can_channel_regs chl[MAX_CHL_NUMBER]; /* offset 0x200 */
+};
+
+#undef __BFP
+
+/* CAN_CONTROL Masks */
+#define SRS			0x0001	/* Software Reset */
+#define DNM			0x0002	/* Device Net Mode */
+#define ABO			0x0004	/* Auto-Bus On Enable */
+#define TXPRIO		0x0008	/* TX Priority (Priority/Mailbox*) */
+#define WBA			0x0010	/* Wake-Up On CAN Bus Activity Enable */
+#define SMR			0x0020	/* Sleep Mode Request */
+#define CSR			0x0040	/* CAN Suspend Mode Request */
+#define CCR			0x0080	/* CAN Configuration Mode Request */
+
+/* CAN_STATUS Masks */
+#define WT			0x0001	/* TX Warning Flag */
+#define WR			0x0002	/* RX Warning Flag */
+#define EP			0x0004	/* Error Passive Mode */
+#define EBO			0x0008	/* Error Bus Off Mode */
+#define SMA			0x0020	/* Sleep Mode Acknowledge */
+#define CSA			0x0040	/* Suspend Mode Acknowledge */
+#define CCA			0x0080	/* Configuration Mode Acknowledge */
+#define MBPTR		0x1F00	/* Mailbox Pointer */
+#define TRM			0x4000	/* Transmit Mode */
+#define REC			0x8000	/* Receive Mode */
+
+/* CAN_CLOCK Masks */
+#define BRP			0x03FF	/* Bit-Rate Pre-Scaler */
+
+/* CAN_TIMING Masks */
+#define TSEG1		0x000F	/* Time Segment 1 */
+#define TSEG2		0x0070	/* Time Segment 2 */
+#define SAM			0x0080	/* Sampling */
+#define SJW			0x0300	/* Synchronization Jump Width */
+
+/* CAN_DEBUG Masks */
+#define DEC			0x0001	/* Disable CAN Error Counters */
+#define DRI			0x0002	/* Disable CAN RX Input */
+#define DTO			0x0004	/* Disable CAN TX Output */
+#define DIL			0x0008	/* Disable CAN Internal Loop */
+#define MAA			0x0010	/* Mode Auto-Acknowledge Enable */
+#define MRB			0x0020	/* Mode Read Back Enable */
+#define CDE			0x8000	/* CAN Debug Enable */
+
+/* CAN_CEC Masks */
+#define RXECNT		0x00FF	/* Receive Error Counter */
+#define TXECNT		0xFF00	/* Transmit Error Counter */
+
+/* CAN_INTR Masks */
+#define MBRIRQ	0x0001	/* Mailbox Receive Interrupt */
+#define MBTIRQ	0x0002	/* Mailbox Transmit Interrupt */
+#define GIRQ		0x0004	/* Global Interrupt */
+#define SMACK		0x0008	/* Sleep Mode Acknowledge */
+#define CANTX		0x0040	/* CAN TX Bus Value */
+#define CANRX		0x0080	/* CAN RX Bus Value */
+
+/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */
+#define DFC			0xFFFF	/* Data Filtering Code (If Enabled) (ID0) */
+#define EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier (ID0) */
+#define EXTID_HI	0x0003	/* Upper 2 Bits of Extended Identifier (ID1) */
+#define BASEID		0x1FFC	/* Base Identifier */
+#define IDE			0x2000	/* Identifier Extension */
+#define RTR			0x4000	/* Remote Frame Transmission Request */
+#define AME			0x8000	/* Acceptance Mask Enable */
+
+/* CAN_MBxx_TIMESTAMP Masks */
+#define TSV			0xFFFF	/* Timestamp */
+
+/* CAN_MBxx_LENGTH Masks */
+#define DLC			0x000F	/* Data Length Code */
+
+/* CAN_AMxxH and CAN_AMxxL Masks */
+#define DFM			0xFFFF	/* Data Field Mask (If Enabled) (CAN_AMxxL) */
+#define EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */
+#define EXTID_HI	0x0003	/* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */
+#define BASEID		0x1FFC	/* Base Identifier */
+#define AMIDE		0x2000	/* Acceptance Mask ID Extension Enable */
+#define FMD			0x4000	/* Full Mask Data Field Enable */
+#define FDF			0x8000	/* Filter On Data Field Enable */
+
+/* CAN_MC1 Masks */
+#define MC0			0x0001	/* Enable Mailbox 0 */
+#define MC1			0x0002	/* Enable Mailbox 1 */
+#define MC2			0x0004	/* Enable Mailbox 2 */
+#define MC3			0x0008	/* Enable Mailbox 3 */
+#define MC4			0x0010	/* Enable Mailbox 4 */
+#define MC5			0x0020	/* Enable Mailbox 5 */
+#define MC6			0x0040	/* Enable Mailbox 6 */
+#define MC7			0x0080	/* Enable Mailbox 7 */
+#define MC8			0x0100	/* Enable Mailbox 8 */
+#define MC9			0x0200	/* Enable Mailbox 9 */
+#define MC10		0x0400	/* Enable Mailbox 10 */
+#define MC11		0x0800	/* Enable Mailbox 11 */
+#define MC12		0x1000	/* Enable Mailbox 12 */
+#define MC13		0x2000	/* Enable Mailbox 13 */
+#define MC14		0x4000	/* Enable Mailbox 14 */
+#define MC15		0x8000	/* Enable Mailbox 15 */
+
+/* CAN_MC2 Masks */
+#define MC16		0x0001	/* Enable Mailbox 16 */
+#define MC17		0x0002	/* Enable Mailbox 17 */
+#define MC18		0x0004	/* Enable Mailbox 18 */
+#define MC19		0x0008	/* Enable Mailbox 19 */
+#define MC20		0x0010	/* Enable Mailbox 20 */
+#define MC21		0x0020	/* Enable Mailbox 21 */
+#define MC22		0x0040	/* Enable Mailbox 22 */
+#define MC23		0x0080	/* Enable Mailbox 23 */
+#define MC24		0x0100	/* Enable Mailbox 24 */
+#define MC25		0x0200	/* Enable Mailbox 25 */
+#define MC26		0x0400	/* Enable Mailbox 26 */
+#define MC27		0x0800	/* Enable Mailbox 27 */
+#define MC28		0x1000	/* Enable Mailbox 28 */
+#define MC29		0x2000	/* Enable Mailbox 29 */
+#define MC30		0x4000	/* Enable Mailbox 30 */
+#define MC31		0x8000	/* Enable Mailbox 31 */
+
+/* CAN_MD1 Masks */
+#define MD0			0x0001	/* Enable Mailbox 0 For Receive */
+#define MD1			0x0002	/* Enable Mailbox 1 For Receive */
+#define MD2			0x0004	/* Enable Mailbox 2 For Receive */
+#define MD3			0x0008	/* Enable Mailbox 3 For Receive */
+#define MD4			0x0010	/* Enable Mailbox 4 For Receive */
+#define MD5			0x0020	/* Enable Mailbox 5 For Receive */
+#define MD6			0x0040	/* Enable Mailbox 6 For Receive */
+#define MD7			0x0080	/* Enable Mailbox 7 For Receive */
+#define MD8			0x0100	/* Enable Mailbox 8 For Receive */
+#define MD9			0x0200	/* Enable Mailbox 9 For Receive */
+#define MD10		0x0400	/* Enable Mailbox 10 For Receive */
+#define MD11		0x0800	/* Enable Mailbox 11 For Receive */
+#define MD12		0x1000	/* Enable Mailbox 12 For Receive */
+#define MD13		0x2000	/* Enable Mailbox 13 For Receive */
+#define MD14		0x4000	/* Enable Mailbox 14 For Receive */
+#define MD15		0x8000	/* Enable Mailbox 15 For Receive */
+
+/* CAN_MD2 Masks */
+#define MD16		0x0001	/* Enable Mailbox 16 For Receive */
+#define MD17		0x0002	/* Enable Mailbox 17 For Receive */
+#define MD18		0x0004	/* Enable Mailbox 18 For Receive */
+#define MD19		0x0008	/* Enable Mailbox 19 For Receive */
+#define MD20		0x0010	/* Enable Mailbox 20 For Receive */
+#define MD21		0x0020	/* Enable Mailbox 21 For Receive */
+#define MD22		0x0040	/* Enable Mailbox 22 For Receive */
+#define MD23		0x0080	/* Enable Mailbox 23 For Receive */
+#define MD24		0x0100	/* Enable Mailbox 24 For Receive */
+#define MD25		0x0200	/* Enable Mailbox 25 For Receive */
+#define MD26		0x0400	/* Enable Mailbox 26 For Receive */
+#define MD27		0x0800	/* Enable Mailbox 27 For Receive */
+#define MD28		0x1000	/* Enable Mailbox 28 For Receive */
+#define MD29		0x2000	/* Enable Mailbox 29 For Receive */
+#define MD30		0x4000	/* Enable Mailbox 30 For Receive */
+#define MD31		0x8000	/* Enable Mailbox 31 For Receive */
+
+/* CAN_RMP1 Masks */
+#define RMP0		0x0001	/* RX Message Pending In Mailbox 0 */
+#define RMP1		0x0002	/* RX Message Pending In Mailbox 1 */
+#define RMP2		0x0004	/* RX Message Pending In Mailbox 2 */
+#define RMP3		0x0008	/* RX Message Pending In Mailbox 3 */
+#define RMP4		0x0010	/* RX Message Pending In Mailbox 4 */
+#define RMP5		0x0020	/* RX Message Pending In Mailbox 5 */
+#define RMP6		0x0040	/* RX Message Pending In Mailbox 6 */
+#define RMP7		0x0080	/* RX Message Pending In Mailbox 7 */
+#define RMP8		0x0100	/* RX Message Pending In Mailbox 8 */
+#define RMP9		0x0200	/* RX Message Pending In Mailbox 9 */
+#define RMP10		0x0400	/* RX Message Pending In Mailbox 10 */
+#define RMP11		0x0800	/* RX Message Pending In Mailbox 11 */
+#define RMP12		0x1000	/* RX Message Pending In Mailbox 12 */
+#define RMP13		0x2000	/* RX Message Pending In Mailbox 13 */
+#define RMP14		0x4000	/* RX Message Pending In Mailbox 14 */
+#define RMP15		0x8000	/* RX Message Pending In Mailbox 15 */
+
+/* CAN_RMP2 Masks */
+#define RMP16		0x0001	/* RX Message Pending In Mailbox 16 */
+#define RMP17		0x0002	/* RX Message Pending In Mailbox 17 */
+#define RMP18		0x0004	/* RX Message Pending In Mailbox 18 */
+#define RMP19		0x0008	/* RX Message Pending In Mailbox 19 */
+#define RMP20		0x0010	/* RX Message Pending In Mailbox 20 */
+#define RMP21		0x0020	/* RX Message Pending In Mailbox 21 */
+#define RMP22		0x0040	/* RX Message Pending In Mailbox 22 */
+#define RMP23		0x0080	/* RX Message Pending In Mailbox 23 */
+#define RMP24		0x0100	/* RX Message Pending In Mailbox 24 */
+#define RMP25		0x0200	/* RX Message Pending In Mailbox 25 */
+#define RMP26		0x0400	/* RX Message Pending In Mailbox 26 */
+#define RMP27		0x0800	/* RX Message Pending In Mailbox 27 */
+#define RMP28		0x1000	/* RX Message Pending In Mailbox 28 */
+#define RMP29		0x2000	/* RX Message Pending In Mailbox 29 */
+#define RMP30		0x4000	/* RX Message Pending In Mailbox 30 */
+#define RMP31		0x8000	/* RX Message Pending In Mailbox 31 */
+
+/* CAN_RML1 Masks */
+#define RML0		0x0001	/* RX Message Lost In Mailbox 0 */
+#define RML1		0x0002	/* RX Message Lost In Mailbox 1 */
+#define RML2		0x0004	/* RX Message Lost In Mailbox 2 */
+#define RML3		0x0008	/* RX Message Lost In Mailbox 3 */
+#define RML4		0x0010	/* RX Message Lost In Mailbox 4 */
+#define RML5		0x0020	/* RX Message Lost In Mailbox 5 */
+#define RML6		0x0040	/* RX Message Lost In Mailbox 6 */
+#define RML7		0x0080	/* RX Message Lost In Mailbox 7 */
+#define RML8		0x0100	/* RX Message Lost In Mailbox 8 */
+#define RML9		0x0200	/* RX Message Lost In Mailbox 9 */
+#define RML10		0x0400	/* RX Message Lost In Mailbox 10 */
+#define RML11		0x0800	/* RX Message Lost In Mailbox 11 */
+#define RML12		0x1000	/* RX Message Lost In Mailbox 12 */
+#define RML13		0x2000	/* RX Message Lost In Mailbox 13 */
+#define RML14		0x4000	/* RX Message Lost In Mailbox 14 */
+#define RML15		0x8000	/* RX Message Lost In Mailbox 15 */
+
+/* CAN_RML2 Masks */
+#define RML16		0x0001	/* RX Message Lost In Mailbox 16 */
+#define RML17		0x0002	/* RX Message Lost In Mailbox 17 */
+#define RML18		0x0004	/* RX Message Lost In Mailbox 18 */
+#define RML19		0x0008	/* RX Message Lost In Mailbox 19 */
+#define RML20		0x0010	/* RX Message Lost In Mailbox 20 */
+#define RML21		0x0020	/* RX Message Lost In Mailbox 21 */
+#define RML22		0x0040	/* RX Message Lost In Mailbox 22 */
+#define RML23		0x0080	/* RX Message Lost In Mailbox 23 */
+#define RML24		0x0100	/* RX Message Lost In Mailbox 24 */
+#define RML25		0x0200	/* RX Message Lost In Mailbox 25 */
+#define RML26		0x0400	/* RX Message Lost In Mailbox 26 */
+#define RML27		0x0800	/* RX Message Lost In Mailbox 27 */
+#define RML28		0x1000	/* RX Message Lost In Mailbox 28 */
+#define RML29		0x2000	/* RX Message Lost In Mailbox 29 */
+#define RML30		0x4000	/* RX Message Lost In Mailbox 30 */
+#define RML31		0x8000	/* RX Message Lost In Mailbox 31 */
+
+/* CAN_OPSS1 Masks */
+#define OPSS0		0x0001	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */
+#define OPSS1		0x0002	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */
+#define OPSS2		0x0004	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */
+#define OPSS3		0x0008	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */
+#define OPSS4		0x0010	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */
+#define OPSS5		0x0020	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */
+#define OPSS6		0x0040	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */
+#define OPSS7		0x0080	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */
+#define OPSS8		0x0100	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */
+#define OPSS9		0x0200	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */
+#define OPSS10		0x0400	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */
+#define OPSS11		0x0800	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */
+#define OPSS12		0x1000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */
+#define OPSS13		0x2000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */
+#define OPSS14		0x4000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */
+#define OPSS15		0x8000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */
+
+/* CAN_OPSS2 Masks */
+#define OPSS16		0x0001	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */
+#define OPSS17		0x0002	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */
+#define OPSS18		0x0004	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */
+#define OPSS19		0x0008	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */
+#define OPSS20		0x0010	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */
+#define OPSS21		0x0020	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */
+#define OPSS22		0x0040	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */
+#define OPSS23		0x0080	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */
+#define OPSS24		0x0100	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */
+#define OPSS25		0x0200	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */
+#define OPSS26		0x0400	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */
+#define OPSS27		0x0800	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */
+#define OPSS28		0x1000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */
+#define OPSS29		0x2000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */
+#define OPSS30		0x4000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */
+#define OPSS31		0x8000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */
+
+/* CAN_TRR1 Masks */
+#define TRR0		0x0001	/* Deny But Don't Lock Access To Mailbox 0 */
+#define TRR1		0x0002	/* Deny But Don't Lock Access To Mailbox 1 */
+#define TRR2		0x0004	/* Deny But Don't Lock Access To Mailbox 2 */
+#define TRR3		0x0008	/* Deny But Don't Lock Access To Mailbox 3 */
+#define TRR4		0x0010	/* Deny But Don't Lock Access To Mailbox 4 */
+#define TRR5		0x0020	/* Deny But Don't Lock Access To Mailbox 5 */
+#define TRR6		0x0040	/* Deny But Don't Lock Access To Mailbox 6 */
+#define TRR7		0x0080	/* Deny But Don't Lock Access To Mailbox 7 */
+#define TRR8		0x0100	/* Deny But Don't Lock Access To Mailbox 8 */
+#define TRR9		0x0200	/* Deny But Don't Lock Access To Mailbox 9 */
+#define TRR10		0x0400	/* Deny But Don't Lock Access To Mailbox 10 */
+#define TRR11		0x0800	/* Deny But Don't Lock Access To Mailbox 11 */
+#define TRR12		0x1000	/* Deny But Don't Lock Access To Mailbox 12 */
+#define TRR13		0x2000	/* Deny But Don't Lock Access To Mailbox 13 */
+#define TRR14		0x4000	/* Deny But Don't Lock Access To Mailbox 14 */
+#define TRR15		0x8000	/* Deny But Don't Lock Access To Mailbox 15 */
+
+/* CAN_TRR2 Masks */
+#define TRR16		0x0001	/* Deny But Don't Lock Access To Mailbox 16 */
+#define TRR17		0x0002	/* Deny But Don't Lock Access To Mailbox 17 */
+#define TRR18		0x0004	/* Deny But Don't Lock Access To Mailbox 18 */
+#define TRR19		0x0008	/* Deny But Don't Lock Access To Mailbox 19 */
+#define TRR20		0x0010	/* Deny But Don't Lock Access To Mailbox 20 */
+#define TRR21		0x0020	/* Deny But Don't Lock Access To Mailbox 21 */
+#define TRR22		0x0040	/* Deny But Don't Lock Access To Mailbox 22 */
+#define TRR23		0x0080	/* Deny But Don't Lock Access To Mailbox 23 */
+#define TRR24		0x0100	/* Deny But Don't Lock Access To Mailbox 24 */
+#define TRR25		0x0200	/* Deny But Don't Lock Access To Mailbox 25 */
+#define TRR26		0x0400	/* Deny But Don't Lock Access To Mailbox 26 */
+#define TRR27		0x0800	/* Deny But Don't Lock Access To Mailbox 27 */
+#define TRR28		0x1000	/* Deny But Don't Lock Access To Mailbox 28 */
+#define TRR29		0x2000	/* Deny But Don't Lock Access To Mailbox 29 */
+#define TRR30		0x4000	/* Deny But Don't Lock Access To Mailbox 30 */
+#define TRR31		0x8000	/* Deny But Don't Lock Access To Mailbox 31 */
+
+/* CAN_TRS1 Masks */
+#define TRS0		0x0001	/* Remote Frame Request For Mailbox 0 */
+#define TRS1		0x0002	/* Remote Frame Request For Mailbox 1 */
+#define TRS2		0x0004	/* Remote Frame Request For Mailbox 2 */
+#define TRS3		0x0008	/* Remote Frame Request For Mailbox 3 */
+#define TRS4		0x0010	/* Remote Frame Request For Mailbox 4 */
+#define TRS5		0x0020	/* Remote Frame Request For Mailbox 5 */
+#define TRS6		0x0040	/* Remote Frame Request For Mailbox 6 */
+#define TRS7		0x0080	/* Remote Frame Request For Mailbox 7 */
+#define TRS8		0x0100	/* Remote Frame Request For Mailbox 8 */
+#define TRS9		0x0200	/* Remote Frame Request For Mailbox 9 */
+#define TRS10		0x0400	/* Remote Frame Request For Mailbox 10 */
+#define TRS11		0x0800	/* Remote Frame Request For Mailbox 11 */
+#define TRS12		0x1000	/* Remote Frame Request For Mailbox 12 */
+#define TRS13		0x2000	/* Remote Frame Request For Mailbox 13 */
+#define TRS14		0x4000	/* Remote Frame Request For Mailbox 14 */
+#define TRS15		0x8000	/* Remote Frame Request For Mailbox 15 */
+
+/* CAN_TRS2 Masks */
+#define TRS16		0x0001	/* Remote Frame Request For Mailbox 16 */
+#define TRS17		0x0002	/* Remote Frame Request For Mailbox 17 */
+#define TRS18		0x0004	/* Remote Frame Request For Mailbox 18 */
+#define TRS19		0x0008	/* Remote Frame Request For Mailbox 19 */
+#define TRS20		0x0010	/* Remote Frame Request For Mailbox 20 */
+#define TRS21		0x0020	/* Remote Frame Request For Mailbox 21 */
+#define TRS22		0x0040	/* Remote Frame Request For Mailbox 22 */
+#define TRS23		0x0080	/* Remote Frame Request For Mailbox 23 */
+#define TRS24		0x0100	/* Remote Frame Request For Mailbox 24 */
+#define TRS25		0x0200	/* Remote Frame Request For Mailbox 25 */
+#define TRS26		0x0400	/* Remote Frame Request For Mailbox 26 */
+#define TRS27		0x0800	/* Remote Frame Request For Mailbox 27 */
+#define TRS28		0x1000	/* Remote Frame Request For Mailbox 28 */
+#define TRS29		0x2000	/* Remote Frame Request For Mailbox 29 */
+#define TRS30		0x4000	/* Remote Frame Request For Mailbox 30 */
+#define TRS31		0x8000	/* Remote Frame Request For Mailbox 31 */
+
+/* CAN_AA1 Masks */
+#define AA0			0x0001	/* Aborted Message In Mailbox 0 */
+#define AA1			0x0002	/* Aborted Message In Mailbox 1 */
+#define AA2			0x0004	/* Aborted Message In Mailbox 2 */
+#define AA3			0x0008	/* Aborted Message In Mailbox 3 */
+#define AA4			0x0010	/* Aborted Message In Mailbox 4 */
+#define AA5			0x0020	/* Aborted Message In Mailbox 5 */
+#define AA6			0x0040	/* Aborted Message In Mailbox 6 */
+#define AA7			0x0080	/* Aborted Message In Mailbox 7 */
+#define AA8			0x0100	/* Aborted Message In Mailbox 8 */
+#define AA9			0x0200	/* Aborted Message In Mailbox 9 */
+#define AA10		0x0400	/* Aborted Message In Mailbox 10 */
+#define AA11		0x0800	/* Aborted Message In Mailbox 11 */
+#define AA12		0x1000	/* Aborted Message In Mailbox 12 */
+#define AA13		0x2000	/* Aborted Message In Mailbox 13 */
+#define AA14		0x4000	/* Aborted Message In Mailbox 14 */
+#define AA15		0x8000	/* Aborted Message In Mailbox 15 */
+
+/* CAN_AA2 Masks */
+#define AA16		0x0001	/* Aborted Message In Mailbox 16 */
+#define AA17		0x0002	/* Aborted Message In Mailbox 17 */
+#define AA18		0x0004	/* Aborted Message In Mailbox 18 */
+#define AA19		0x0008	/* Aborted Message In Mailbox 19 */
+#define AA20		0x0010	/* Aborted Message In Mailbox 20 */
+#define AA21		0x0020	/* Aborted Message In Mailbox 21 */
+#define AA22		0x0040	/* Aborted Message In Mailbox 22 */
+#define AA23		0x0080	/* Aborted Message In Mailbox 23 */
+#define AA24		0x0100	/* Aborted Message In Mailbox 24 */
+#define AA25		0x0200	/* Aborted Message In Mailbox 25 */
+#define AA26		0x0400	/* Aborted Message In Mailbox 26 */
+#define AA27		0x0800	/* Aborted Message In Mailbox 27 */
+#define AA28		0x1000	/* Aborted Message In Mailbox 28 */
+#define AA29		0x2000	/* Aborted Message In Mailbox 29 */
+#define AA30		0x4000	/* Aborted Message In Mailbox 30 */
+#define AA31		0x8000	/* Aborted Message In Mailbox 31 */
+
+/* CAN_TA1 Masks */
+#define TA0			0x0001	/* Transmit Successful From Mailbox 0 */
+#define TA1			0x0002	/* Transmit Successful From Mailbox 1 */
+#define TA2			0x0004	/* Transmit Successful From Mailbox 2 */
+#define TA3			0x0008	/* Transmit Successful From Mailbox 3 */
+#define TA4			0x0010	/* Transmit Successful From Mailbox 4 */
+#define TA5			0x0020	/* Transmit Successful From Mailbox 5 */
+#define TA6			0x0040	/* Transmit Successful From Mailbox 6 */
+#define TA7			0x0080	/* Transmit Successful From Mailbox 7 */
+#define TA8			0x0100	/* Transmit Successful From Mailbox 8 */
+#define TA9			0x0200	/* Transmit Successful From Mailbox 9 */
+#define TA10		0x0400	/* Transmit Successful From Mailbox 10 */
+#define TA11		0x0800	/* Transmit Successful From Mailbox 11 */
+#define TA12		0x1000	/* Transmit Successful From Mailbox 12 */
+#define TA13		0x2000	/* Transmit Successful From Mailbox 13 */
+#define TA14		0x4000	/* Transmit Successful From Mailbox 14 */
+#define TA15		0x8000	/* Transmit Successful From Mailbox 15 */
+
+/* CAN_TA2 Masks */
+#define TA16		0x0001	/* Transmit Successful From Mailbox 16 */
+#define TA17		0x0002	/* Transmit Successful From Mailbox 17 */
+#define TA18		0x0004	/* Transmit Successful From Mailbox 18 */
+#define TA19		0x0008	/* Transmit Successful From Mailbox 19 */
+#define TA20		0x0010	/* Transmit Successful From Mailbox 20 */
+#define TA21		0x0020	/* Transmit Successful From Mailbox 21 */
+#define TA22		0x0040	/* Transmit Successful From Mailbox 22 */
+#define TA23		0x0080	/* Transmit Successful From Mailbox 23 */
+#define TA24		0x0100	/* Transmit Successful From Mailbox 24 */
+#define TA25		0x0200	/* Transmit Successful From Mailbox 25 */
+#define TA26		0x0400	/* Transmit Successful From Mailbox 26 */
+#define TA27		0x0800	/* Transmit Successful From Mailbox 27 */
+#define TA28		0x1000	/* Transmit Successful From Mailbox 28 */
+#define TA29		0x2000	/* Transmit Successful From Mailbox 29 */
+#define TA30		0x4000	/* Transmit Successful From Mailbox 30 */
+#define TA31		0x8000	/* Transmit Successful From Mailbox 31 */
+
+/* CAN_MBTD Masks */
+#define TDPTR		0x001F	/* Mailbox To Temporarily Disable */
+#define TDA			0x0040	/* Temporary Disable Acknowledge */
+#define TDR			0x0080	/* Temporary Disable Request */
+
+/* CAN_RFH1 Masks */
+#define RFH0		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 0 */
+#define RFH1		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 1 */
+#define RFH2		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 2 */
+#define RFH3		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 3 */
+#define RFH4		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 4 */
+#define RFH5		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 5 */
+#define RFH6		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 6 */
+#define RFH7		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 7 */
+#define RFH8		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 8 */
+#define RFH9		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 9 */
+#define RFH10		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 10 */
+#define RFH11		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 11 */
+#define RFH12		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 12 */
+#define RFH13		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 13 */
+#define RFH14		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 14 */
+#define RFH15		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 15 */
+
+/* CAN_RFH2 Masks */
+#define RFH16		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 16 */
+#define RFH17		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 17 */
+#define RFH18		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 18 */
+#define RFH19		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 19 */
+#define RFH20		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 20 */
+#define RFH21		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 21 */
+#define RFH22		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 22 */
+#define RFH23		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 23 */
+#define RFH24		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 24 */
+#define RFH25		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 25 */
+#define RFH26		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 26 */
+#define RFH27		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 27 */
+#define RFH28		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 28 */
+#define RFH29		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 29 */
+#define RFH30		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 30 */
+#define RFH31		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 31 */
+
+/* CAN_MBTIF1 Masks */
+#define MBTIF0		0x0001	/* TX Interrupt Active In Mailbox 0 */
+#define MBTIF1		0x0002	/* TX Interrupt Active In Mailbox 1 */
+#define MBTIF2		0x0004	/* TX Interrupt Active In Mailbox 2 */
+#define MBTIF3		0x0008	/* TX Interrupt Active In Mailbox 3 */
+#define MBTIF4		0x0010	/* TX Interrupt Active In Mailbox 4 */
+#define MBTIF5		0x0020	/* TX Interrupt Active In Mailbox 5 */
+#define MBTIF6		0x0040	/* TX Interrupt Active In Mailbox 6 */
+#define MBTIF7		0x0080	/* TX Interrupt Active In Mailbox 7 */
+#define MBTIF8		0x0100	/* TX Interrupt Active In Mailbox 8 */
+#define MBTIF9		0x0200	/* TX Interrupt Active In Mailbox 9 */
+#define MBTIF10		0x0400	/* TX Interrupt Active In Mailbox 10 */
+#define MBTIF11		0x0800	/* TX Interrupt Active In Mailbox 11 */
+#define MBTIF12		0x1000	/* TX Interrupt Active In Mailbox 12 */
+#define MBTIF13		0x2000	/* TX Interrupt Active In Mailbox 13 */
+#define MBTIF14		0x4000	/* TX Interrupt Active In Mailbox 14 */
+#define MBTIF15		0x8000	/* TX Interrupt Active In Mailbox 15 */
+
+/* CAN_MBTIF2 Masks */
+#define MBTIF16		0x0001	/* TX Interrupt Active In Mailbox 16 */
+#define MBTIF17		0x0002	/* TX Interrupt Active In Mailbox 17 */
+#define MBTIF18		0x0004	/* TX Interrupt Active In Mailbox 18 */
+#define MBTIF19		0x0008	/* TX Interrupt Active In Mailbox 19 */
+#define MBTIF20		0x0010	/* TX Interrupt Active In Mailbox 20 */
+#define MBTIF21		0x0020	/* TX Interrupt Active In Mailbox 21 */
+#define MBTIF22		0x0040	/* TX Interrupt Active In Mailbox 22 */
+#define MBTIF23		0x0080	/* TX Interrupt Active In Mailbox 23 */
+#define MBTIF24		0x0100	/* TX Interrupt Active In Mailbox 24 */
+#define MBTIF25		0x0200	/* TX Interrupt Active In Mailbox 25 */
+#define MBTIF26		0x0400	/* TX Interrupt Active In Mailbox 26 */
+#define MBTIF27		0x0800	/* TX Interrupt Active In Mailbox 27 */
+#define MBTIF28		0x1000	/* TX Interrupt Active In Mailbox 28 */
+#define MBTIF29		0x2000	/* TX Interrupt Active In Mailbox 29 */
+#define MBTIF30		0x4000	/* TX Interrupt Active In Mailbox 30 */
+#define MBTIF31		0x8000	/* TX Interrupt Active In Mailbox 31 */
+
+/* CAN_MBRIF1 Masks */
+#define MBRIF0		0x0001	/* RX Interrupt Active In Mailbox 0 */
+#define MBRIF1		0x0002	/* RX Interrupt Active In Mailbox 1 */
+#define MBRIF2		0x0004	/* RX Interrupt Active In Mailbox 2 */
+#define MBRIF3		0x0008	/* RX Interrupt Active In Mailbox 3 */
+#define MBRIF4		0x0010	/* RX Interrupt Active In Mailbox 4 */
+#define MBRIF5		0x0020	/* RX Interrupt Active In Mailbox 5 */
+#define MBRIF6		0x0040	/* RX Interrupt Active In Mailbox 6 */
+#define MBRIF7		0x0080	/* RX Interrupt Active In Mailbox 7 */
+#define MBRIF8		0x0100	/* RX Interrupt Active In Mailbox 8 */
+#define MBRIF9		0x0200	/* RX Interrupt Active In Mailbox 9 */
+#define MBRIF10		0x0400	/* RX Interrupt Active In Mailbox 10 */
+#define MBRIF11		0x0800	/* RX Interrupt Active In Mailbox 11 */
+#define MBRIF12		0x1000	/* RX Interrupt Active In Mailbox 12 */
+#define MBRIF13		0x2000	/* RX Interrupt Active In Mailbox 13 */
+#define MBRIF14		0x4000	/* RX Interrupt Active In Mailbox 14 */
+#define MBRIF15		0x8000	/* RX Interrupt Active In Mailbox 15 */
+
+/* CAN_MBRIF2 Masks */
+#define MBRIF16		0x0001	/* RX Interrupt Active In Mailbox 16 */
+#define MBRIF17		0x0002	/* RX Interrupt Active In Mailbox 17 */
+#define MBRIF18		0x0004	/* RX Interrupt Active In Mailbox 18 */
+#define MBRIF19		0x0008	/* RX Interrupt Active In Mailbox 19 */
+#define MBRIF20		0x0010	/* RX Interrupt Active In Mailbox 20 */
+#define MBRIF21		0x0020	/* RX Interrupt Active In Mailbox 21 */
+#define MBRIF22		0x0040	/* RX Interrupt Active In Mailbox 22 */
+#define MBRIF23		0x0080	/* RX Interrupt Active In Mailbox 23 */
+#define MBRIF24		0x0100	/* RX Interrupt Active In Mailbox 24 */
+#define MBRIF25		0x0200	/* RX Interrupt Active In Mailbox 25 */
+#define MBRIF26		0x0400	/* RX Interrupt Active In Mailbox 26 */
+#define MBRIF27		0x0800	/* RX Interrupt Active In Mailbox 27 */
+#define MBRIF28		0x1000	/* RX Interrupt Active In Mailbox 28 */
+#define MBRIF29		0x2000	/* RX Interrupt Active In Mailbox 29 */
+#define MBRIF30		0x4000	/* RX Interrupt Active In Mailbox 30 */
+#define MBRIF31		0x8000	/* RX Interrupt Active In Mailbox 31 */
+
+/* CAN_MBIM1 Masks */
+#define MBIM0		0x0001	/* Enable Interrupt For Mailbox 0 */
+#define MBIM1		0x0002	/* Enable Interrupt For Mailbox 1 */
+#define MBIM2		0x0004	/* Enable Interrupt For Mailbox 2 */
+#define MBIM3		0x0008	/* Enable Interrupt For Mailbox 3 */
+#define MBIM4		0x0010	/* Enable Interrupt For Mailbox 4 */
+#define MBIM5		0x0020	/* Enable Interrupt For Mailbox 5 */
+#define MBIM6		0x0040	/* Enable Interrupt For Mailbox 6 */
+#define MBIM7		0x0080	/* Enable Interrupt For Mailbox 7 */
+#define MBIM8		0x0100	/* Enable Interrupt For Mailbox 8 */
+#define MBIM9		0x0200	/* Enable Interrupt For Mailbox 9 */
+#define MBIM10		0x0400	/* Enable Interrupt For Mailbox 10 */
+#define MBIM11		0x0800	/* Enable Interrupt For Mailbox 11 */
+#define MBIM12		0x1000	/* Enable Interrupt For Mailbox 12 */
+#define MBIM13		0x2000	/* Enable Interrupt For Mailbox 13 */
+#define MBIM14		0x4000	/* Enable Interrupt For Mailbox 14 */
+#define MBIM15		0x8000	/* Enable Interrupt For Mailbox 15 */
+
+/* CAN_MBIM2 Masks */
+#define MBIM16		0x0001	/* Enable Interrupt For Mailbox 16 */
+#define MBIM17		0x0002	/* Enable Interrupt For Mailbox 17 */
+#define MBIM18		0x0004	/* Enable Interrupt For Mailbox 18 */
+#define MBIM19		0x0008	/* Enable Interrupt For Mailbox 19 */
+#define MBIM20		0x0010	/* Enable Interrupt For Mailbox 20 */
+#define MBIM21		0x0020	/* Enable Interrupt For Mailbox 21 */
+#define MBIM22		0x0040	/* Enable Interrupt For Mailbox 22 */
+#define MBIM23		0x0080	/* Enable Interrupt For Mailbox 23 */
+#define MBIM24		0x0100	/* Enable Interrupt For Mailbox 24 */
+#define MBIM25		0x0200	/* Enable Interrupt For Mailbox 25 */
+#define MBIM26		0x0400	/* Enable Interrupt For Mailbox 26 */
+#define MBIM27		0x0800	/* Enable Interrupt For Mailbox 27 */
+#define MBIM28		0x1000	/* Enable Interrupt For Mailbox 28 */
+#define MBIM29		0x2000	/* Enable Interrupt For Mailbox 29 */
+#define MBIM30		0x4000	/* Enable Interrupt For Mailbox 30 */
+#define MBIM31		0x8000	/* Enable Interrupt For Mailbox 31 */
+
+/* CAN_GIM Masks */
+#define EWTIM		0x0001	/* Enable TX Error Count Interrupt */
+#define EWRIM		0x0002	/* Enable RX Error Count Interrupt */
+#define EPIM		0x0004	/* Enable Error-Passive Mode Interrupt */
+#define BOIM		0x0008	/* Enable Bus Off Interrupt */
+#define WUIM		0x0010	/* Enable Wake-Up Interrupt */
+#define UIAIM		0x0020	/* Enable Access To Unimplemented Address Interrupt */
+#define AAIM		0x0040	/* Enable Abort Acknowledge Interrupt */
+#define RMLIM		0x0080	/* Enable RX Message Lost Interrupt */
+#define UCEIM		0x0100	/* Enable Universal Counter Overflow Interrupt */
+#define EXTIM		0x0200	/* Enable External Trigger Output Interrupt */
+#define ADIM		0x0400	/* Enable Access Denied Interrupt */
+
+/* CAN_GIS Masks */
+#define EWTIS		0x0001	/* TX Error Count IRQ Status */
+#define EWRIS		0x0002	/* RX Error Count IRQ Status */
+#define EPIS		0x0004	/* Error-Passive Mode IRQ Status */
+#define BOIS		0x0008	/* Bus Off IRQ Status */
+#define WUIS		0x0010	/* Wake-Up IRQ Status */
+#define UIAIS		0x0020	/* Access To Unimplemented Address IRQ Status */
+#define AAIS		0x0040	/* Abort Acknowledge IRQ Status */
+#define RMLIS		0x0080	/* RX Message Lost IRQ Status */
+#define UCEIS		0x0100	/* Universal Counter Overflow IRQ Status */
+#define EXTIS		0x0200	/* External Trigger Output IRQ Status */
+#define ADIS		0x0400	/* Access Denied IRQ Status */
+
+/* CAN_GIF Masks */
+#define EWTIF		0x0001	/* TX Error Count IRQ Flag */
+#define EWRIF		0x0002	/* RX Error Count IRQ Flag */
+#define EPIF		0x0004	/* Error-Passive Mode IRQ Flag */
+#define BOIF		0x0008	/* Bus Off IRQ Flag */
+#define WUIF		0x0010	/* Wake-Up IRQ Flag */
+#define UIAIF		0x0020	/* Access To Unimplemented Address IRQ Flag */
+#define AAIF		0x0040	/* Abort Acknowledge IRQ Flag */
+#define RMLIF		0x0080	/* RX Message Lost IRQ Flag */
+#define UCEIF		0x0100	/* Universal Counter Overflow IRQ Flag */
+#define EXTIF		0x0200	/* External Trigger Output IRQ Flag */
+#define ADIF		0x0400	/* Access Denied IRQ Flag */
+
+/* CAN_UCCNF Masks */
+#define UCCNF		0x000F	/* Universal Counter Mode */
+#define UC_STAMP	0x0001	/*  Timestamp Mode */
+#define UC_WDOG		0x0002	/*  Watchdog Mode */
+#define UC_AUTOTX	0x0003	/*  Auto-Transmit Mode */
+#define UC_ERROR	0x0006	/*  CAN Error Frame Count */
+#define UC_OVER		0x0007	/*  CAN Overload Frame Count */
+#define UC_LOST		0x0008	/*  Arbitration Lost During TX Count */
+#define UC_AA		0x0009	/*  TX Abort Count */
+#define UC_TA		0x000A	/*  TX Successful Count */
+#define UC_REJECT	0x000B	/*  RX Message Rejected Count */
+#define UC_RML		0x000C	/*  RX Message Lost Count */
+#define UC_RX		0x000D	/*  Total Successful RX Messages Count */
+#define UC_RMP		0x000E	/*  Successful RX W/Matching ID Count */
+#define UC_ALL		0x000F	/*  Correct Message On CAN Bus Line Count */
+#define UCRC		0x0020	/* Universal Counter Reload/Clear */
+#define UCCT		0x0040	/* Universal Counter CAN Trigger */
+#define UCE			0x0080	/* Universal Counter Enable */
+
+/* CAN_ESR Masks */
+#define ACKE		0x0004	/* Acknowledge Error */
+#define SER			0x0008	/* Stuff Error */
+#define CRCE		0x0010	/* CRC Error */
+#define SA0			0x0020	/* Stuck At Dominant Error */
+#define BEF			0x0040	/* Bit Error Flag */
+#define FER			0x0080	/* Form Error Flag */
+
+/* CAN_EWR Masks */
+#define EWLREC		0x00FF	/* RX Error Count Limit (For EWRIS) */
+#define EWLTEC		0xFF00	/* TX Error Count Limit (For EWTIS) */
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_dma.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_dma.h
new file mode 100644
index 0000000..6319f4e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_dma.h
@@ -0,0 +1,165 @@
+/*
+ * bfin_dma.h - Blackfin DMA defines/structures/etc...
+ *
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_DMA_H__
+#define __ASM_BFIN_DMA_H__
+
+#include <linux/types.h>
+
+/* DMA_CONFIG Masks */
+#define DMAEN			0x0001	/* DMA Channel Enable */
+#define WNR				0x0002	/* Channel Direction (W/R*) */
+#define WDSIZE_8		0x0000	/* Transfer Word Size = 8 */
+#define PSIZE_8			0x00000000	/* Transfer Word Size = 16 */
+
+#ifdef CONFIG_BF60x
+
+#define PSIZE_16		0x00000010	/* Transfer Word Size = 16 */
+#define PSIZE_32		0x00000020	/* Transfer Word Size = 32 */
+#define PSIZE_64		0x00000030	/* Transfer Word Size = 32 */
+#define WDSIZE_16		0x00000100	/* Transfer Word Size = 16 */
+#define WDSIZE_32		0x00000200	/* Transfer Word Size = 32 */
+#define WDSIZE_64		0x00000300	/* Transfer Word Size = 32 */
+#define WDSIZE_128		0x00000400	/* Transfer Word Size = 32 */
+#define WDSIZE_256		0x00000500	/* Transfer Word Size = 32 */
+#define DMA2D			0x04000000	/* DMA Mode (2D/1D*) */
+#define RESTART			0x00000004	/* DMA Buffer Clear SYNC */
+#define DI_EN_X			0x00100000	/* Data Interrupt Enable in X count */
+#define DI_EN_Y			0x00200000	/* Data Interrupt Enable in Y count */
+#define DI_EN_P			0x00300000	/* Data Interrupt Enable in Peripheral */
+#define DI_EN			DI_EN_X		/* Data Interrupt Enable */
+#define NDSIZE_0		0x00000000	/* Next Descriptor Size = 1 */
+#define NDSIZE_1		0x00010000	/* Next Descriptor Size = 2 */
+#define NDSIZE_2		0x00020000	/* Next Descriptor Size = 3 */
+#define NDSIZE_3		0x00030000	/* Next Descriptor Size = 4 */
+#define NDSIZE_4		0x00040000	/* Next Descriptor Size = 5 */
+#define NDSIZE_5		0x00050000	/* Next Descriptor Size = 6 */
+#define NDSIZE_6		0x00060000	/* Next Descriptor Size = 7 */
+#define NDSIZE			0x00070000	/* Next Descriptor Size */
+#define NDSIZE_OFFSET		16		/* Next Descriptor Size Offset */
+#define DMAFLOW_LIST		0x00004000	/* Descriptor List Mode */
+#define DMAFLOW_LARGE		DMAFLOW_LIST
+#define DMAFLOW_ARRAY		0x00005000	/* Descriptor Array Mode */
+#define DMAFLOW_LIST_DEMAND	0x00006000	/* Descriptor Demand List Mode */
+#define DMAFLOW_ARRAY_DEMAND	0x00007000	/* Descriptor Demand Array Mode */
+#define DMA_RUN_DFETCH		0x00000100	/* DMA Channel Running Indicator (DFETCH) */
+#define DMA_RUN			0x00000200	/* DMA Channel Running Indicator */
+#define DMA_RUN_WAIT_TRIG	0x00000300	/* DMA Channel Running Indicator (WAIT TRIG) */
+#define DMA_RUN_WAIT_ACK	0x00000400	/* DMA Channel Running Indicator (WAIT ACK) */
+
+#else
+
+#define PSIZE_16		0x0000	/* Transfer Word Size = 16 */
+#define PSIZE_32		0x0000	/* Transfer Word Size = 32 */
+#define WDSIZE_16		0x0004	/* Transfer Word Size = 16 */
+#define WDSIZE_32		0x0008	/* Transfer Word Size = 32 */
+#define DMA2D			0x0010	/* DMA Mode (2D/1D*) */
+#define RESTART			0x0020	/* DMA Buffer Clear */
+#define DI_SEL			0x0040	/* Data Interrupt Timing Select */
+#define DI_EN			0x0080	/* Data Interrupt Enable */
+#define DI_EN_X			0x00C0	/* Data Interrupt Enable in X count*/
+#define DI_EN_Y			0x0080	/* Data Interrupt Enable in Y count*/
+#define NDSIZE_0		0x0000	/* Next Descriptor Size = 0 (Stop/Autobuffer) */
+#define NDSIZE_1		0x0100	/* Next Descriptor Size = 1 */
+#define NDSIZE_2		0x0200	/* Next Descriptor Size = 2 */
+#define NDSIZE_3		0x0300	/* Next Descriptor Size = 3 */
+#define NDSIZE_4		0x0400	/* Next Descriptor Size = 4 */
+#define NDSIZE_5		0x0500	/* Next Descriptor Size = 5 */
+#define NDSIZE_6		0x0600	/* Next Descriptor Size = 6 */
+#define NDSIZE_7		0x0700	/* Next Descriptor Size = 7 */
+#define NDSIZE_8		0x0800	/* Next Descriptor Size = 8 */
+#define NDSIZE_9		0x0900	/* Next Descriptor Size = 9 */
+#define NDSIZE			0x0f00	/* Next Descriptor Size */
+#define NDSIZE_OFFSET		8	/* Next Descriptor Size Offset */
+#define DMAFLOW_ARRAY	0x4000	/* Descriptor Array Mode */
+#define DMAFLOW_SMALL	0x6000	/* Small Model Descriptor List Mode */
+#define DMAFLOW_LARGE	0x7000	/* Large Model Descriptor List Mode */
+#define DFETCH			0x0004	/* DMA Descriptor Fetch Indicator */
+#define DMA_RUN			0x0008	/* DMA Channel Running Indicator */
+
+#endif
+#define DMAFLOW			0x7000	/* Flow Control */
+#define DMAFLOW_STOP	0x0000	/* Stop Mode */
+#define DMAFLOW_AUTO	0x1000	/* Autobuffer Mode */
+
+/* DMA_IRQ_STATUS Masks */
+#define DMA_DONE		0x0001	/* DMA Completion Interrupt Status */
+#define DMA_ERR			0x0002	/* DMA Error Interrupt Status */
+#ifdef CONFIG_BF60x
+#define DMA_PIRQ		0x0004	/* DMA Peripheral Error Interrupt Status */
+#else
+#define DMA_PIRQ		0
+#endif
+
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+
+/*
+ * bfin dma registers layout
+ */
+struct bfin_dma_regs {
+	u32 next_desc_ptr;
+	u32 start_addr;
+#ifdef CONFIG_BF60x
+	u32 cfg;
+	u32 x_count;
+	u32 x_modify;
+	u32 y_count;
+	u32 y_modify;
+	u32 pad1;
+	u32 pad2;
+	u32 curr_desc_ptr;
+	u32 prev_desc_ptr;
+	u32 curr_addr;
+	u32 irq_status;
+	u32 curr_x_count;
+	u32 curr_y_count;
+	u32 pad3;
+	u32 bw_limit_count;
+	u32 curr_bw_limit_count;
+	u32 bw_monitor_count;
+	u32 curr_bw_monitor_count;
+#else
+	__BFP(config);
+	u32 __pad0;
+	__BFP(x_count);
+	__BFP(x_modify);
+	__BFP(y_count);
+	__BFP(y_modify);
+	u32 curr_desc_ptr;
+	u32 curr_addr;
+	__BFP(irq_status);
+	__BFP(peripheral_map);
+	__BFP(curr_x_count);
+	u32 __pad1;
+	__BFP(curr_y_count);
+	u32 __pad2;
+#endif
+};
+
+#ifndef CONFIG_BF60x
+/*
+ * bfin handshake mdma registers layout
+ */
+struct bfin_hmdma_regs {
+	__BFP(control);
+	__BFP(ecinit);
+	__BFP(bcinit);
+	__BFP(ecurgent);
+	__BFP(ecoverflow);
+	__BFP(ecount);
+	__BFP(bcount);
+};
+#endif
+
+#undef __BFP
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_pfmon.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_pfmon.h
new file mode 100644
index 0000000..bf52e1f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_pfmon.h
@@ -0,0 +1,44 @@
+/*
+ * Blackfin Performance Monitor definitions
+ *
+ * Copyright 2005-2011 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or GPL-2 (or later).
+ */
+
+#ifndef __ASM_BFIN_PFMON_H__
+#define __ASM_BFIN_PFMON_H__
+
+/* PFCTL Masks */
+#define PFMON_MASK	0xff
+#define PFCEN_MASK	0x3
+#define PFCEN_DISABLE	0x0
+#define PFCEN_ENABLE_USER	0x1
+#define PFCEN_ENABLE_SUPV	0x2
+#define PFCEN_ENABLE_ALL	(PFCEN_ENABLE_USER | PFCEN_ENABLE_SUPV)
+
+#define PFPWR_P	0
+#define PEMUSW0_P	2
+#define PFCEN0_P	3
+#define PFMON0_P	5
+#define PEMUSW1_P	13
+#define PFCEN1_P	14
+#define PFMON1_P	16
+#define PFCNT0_P	24
+#define PFCNT1_P	25
+
+#define PFPWR	(1 << PFPWR_P)
+#define PEMUSW(n, x)	((x) << ((n) ? PEMUSW1_P : PEMUSW0_P))
+#define PEMUSW0	PEMUSW(0, 1)
+#define PEMUSW1	PEMUSW(1, 1)
+#define PFCEN(n, x)	((x) << ((n) ? PFCEN1_P : PFCEN0_P))
+#define PFCEN0	PFCEN(0, PFCEN_MASK)
+#define PFCEN1	PFCEN(1, PFCEN_MASK)
+#define PFCNT(n, x)	((x) << ((n) ? PFCNT1_P : PFCNT0_P))
+#define PFCNT0	PFCNT(0, 1)
+#define PFCNT1	PFCNT(1, 1)
+#define PFMON(n, x)	((x) << ((n) ? PFMON1_P : PFMON0_P))
+#define PFMON0	PFMON(0, PFMON_MASK)
+#define PFMON1	PFMON(1, PFMON_MASK)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_ppi.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_ppi.h
new file mode 100644
index 0000000..a4e872e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_ppi.h
@@ -0,0 +1,181 @@
+/*
+ * bfin_ppi.h - interface to Blackfin PPIs
+ *
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_PPI_H__
+#define __ASM_BFIN_PPI_H__
+
+#include <linux/types.h>
+#include <asm/blackfin.h>
+
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+
+/*
+ * bfin ppi registers layout
+ */
+struct bfin_ppi_regs {
+	__BFP(control);
+	__BFP(status);
+	__BFP(count);
+	__BFP(delay);
+	__BFP(frame);
+};
+
+/*
+ * bfin eppi registers layout
+ */
+struct bfin_eppi_regs {
+	__BFP(status);
+	__BFP(hcount);
+	__BFP(hdelay);
+	__BFP(vcount);
+	__BFP(vdelay);
+	__BFP(frame);
+	__BFP(line);
+	__BFP(clkdiv);
+	u32 control;
+	u32 fs1w_hbl;
+	u32 fs1p_avpl;
+	u32 fs2w_lvb;
+	u32 fs2p_lavf;
+	u32 clip;
+};
+
+/*
+ * bfin eppi3 registers layout
+ */
+struct bfin_eppi3_regs {
+	u32 stat;
+	u32 hcnt;
+	u32 hdly;
+	u32 vcnt;
+	u32 vdly;
+	u32 frame;
+	u32 line;
+	u32 clkdiv;
+	u32 ctl;
+	u32 fs1_wlhb;
+	u32 fs1_paspl;
+	u32 fs2_wlvb;
+	u32 fs2_palpf;
+	u32 imsk;
+	u32 oddclip;
+	u32 evenclip;
+	u32 fs1_dly;
+	u32 fs2_dly;
+	u32 ctl2;
+};
+
+#undef __BFP
+
+#ifdef EPPI0_CTL2
+#define EPPI_STAT_CFIFOERR              0x00000001    /* Chroma FIFO Error */
+#define EPPI_STAT_YFIFOERR              0x00000002    /* Luma FIFO Error */
+#define EPPI_STAT_LTERROVR              0x00000004    /* Line Track Overflow */
+#define EPPI_STAT_LTERRUNDR             0x00000008    /* Line Track Underflow */
+#define EPPI_STAT_FTERROVR              0x00000010    /* Frame Track Overflow */
+#define EPPI_STAT_FTERRUNDR             0x00000020    /* Frame Track Underflow */
+#define EPPI_STAT_ERRNCOR               0x00000040    /* Preamble Error Not Corrected */
+#define EPPI_STAT_PXPERR                0x00000080    /* PxP Ready Error */
+#define EPPI_STAT_ERRDET                0x00004000    /* Preamble Error Detected */
+#define EPPI_STAT_FLD                   0x00008000    /* Current Field Received by EPPI */
+
+#define EPPI_HCNT_VALUE                 0x0000FFFF    /* Holds the number of samples to read in or write out per line, after PPIx_HDLY number of cycles have expired since the last assertion of PPIx_FS1 */
+
+#define EPPI_HDLY_VALUE                 0x0000FFFF    /* Number of PPIx_CLK cycles to delay after assertion of PPIx_FS1 before starting to read or write data */
+
+#define EPPI_VCNT_VALUE                 0x0000FFFF    /* Holds the number of lines to read in or write out, after PPIx_VDLY number of lines from the start of frame */
+
+#define EPPI_VDLY_VALUE                 0x0000FFFF    /* Number of lines to wait after the start of a new frame before starting to read/transmit data */
+
+#define EPPI_FRAME_VALUE                0x0000FFFF    /* Holds the number of lines expected per frame of data */
+
+#define EPPI_LINE_VALUE                 0x0000FFFF    /* Holds the number of samples expected per line */
+
+#define EPPI_CLKDIV_VALUE               0x0000FFFF    /* Internal clock divider */
+
+#define EPPI_CTL_EN                     0x00000001    /* PPI Enable */
+#define EPPI_CTL_DIR                    0x00000002    /* PPI Direction */
+#define EPPI_CTL_XFRTYPE                0x0000000C    /* PPI Operating Mode */
+#define EPPI_CTL_ACTIVE656              0x00000000    /* XFRTYPE: ITU656 Active Video Only Mode */
+#define EPPI_CTL_ENTIRE656              0x00000004    /* XFRTYPE: ITU656 Entire Field Mode */
+#define EPPI_CTL_VERT656                0x00000008    /* XFRTYPE: ITU656 Vertical Blanking Only Mode */
+#define EPPI_CTL_NON656                 0x0000000C    /* XFRTYPE: Non-ITU656 Mode (GP Mode) */
+#define EPPI_CTL_FSCFG                  0x00000030    /* Frame Sync Configuration */
+#define EPPI_CTL_SYNC0                  0x00000000    /* FSCFG: Sync Mode 0 */
+#define EPPI_CTL_SYNC1                  0x00000010    /* FSCFG: Sync Mode 1 */
+#define EPPI_CTL_SYNC2                  0x00000020    /* FSCFG: Sync Mode 2 */
+#define EPPI_CTL_SYNC3                  0x00000030    /* FSCFG: Sync Mode 3 */
+#define EPPI_CTL_FLDSEL                 0x00000040    /* Field Select/Trigger */
+#define EPPI_CTL_ITUTYPE                0x00000080    /* ITU Interlace or Progressive */
+#define EPPI_CTL_BLANKGEN               0x00000100    /* ITU Output Mode with Internal Blanking Generation */
+#define EPPI_CTL_ICLKGEN                0x00000200    /* Internal Clock Generation */
+#define EPPI_CTL_IFSGEN                 0x00000400    /* Internal Frame Sync Generation */
+#define EPPI_CTL_SIGNEXT                0x00000800    /* Sign Extension */
+#define EPPI_CTL_POLC                   0x00003000    /* Frame Sync and Data Driving and Sampling Edges */
+#define EPPI_CTL_POLC0                  0x00000000    /* POLC: Clock/Sync polarity mode 0 */
+#define EPPI_CTL_POLC1                  0x00001000    /* POLC: Clock/Sync polarity mode 1 */
+#define EPPI_CTL_POLC2                  0x00002000    /* POLC: Clock/Sync polarity mode 2 */
+#define EPPI_CTL_POLC3                  0x00003000    /* POLC: Clock/Sync polarity mode 3 */
+#define EPPI_CTL_POLS                   0x0000C000    /* Frame Sync Polarity */
+#define EPPI_CTL_FS1HI_FS2HI            0x00000000    /* POLS: FS1 and FS2 are active high */
+#define EPPI_CTL_FS1LO_FS2HI            0x00004000    /* POLS: FS1 is active low. FS2 is active high */
+#define EPPI_CTL_FS1HI_FS2LO            0x00008000    /* POLS: FS1 is active high. FS2 is active low */
+#define EPPI_CTL_FS1LO_FS2LO            0x0000C000    /* POLS: FS1 and FS2 are active low */
+#define EPPI_CTL_DLEN                   0x00070000    /* Data Length */
+#define EPPI_CTL_DLEN08                 0x00000000    /* DLEN: 8 bits */
+#define EPPI_CTL_DLEN10                 0x00010000    /* DLEN: 10 bits */
+#define EPPI_CTL_DLEN12                 0x00020000    /* DLEN: 12 bits */
+#define EPPI_CTL_DLEN14                 0x00030000    /* DLEN: 14 bits */
+#define EPPI_CTL_DLEN16                 0x00040000    /* DLEN: 16 bits */
+#define EPPI_CTL_DLEN18                 0x00050000    /* DLEN: 18 bits */
+#define EPPI_CTL_DLEN20                 0x00060000    /* DLEN: 20 bits */
+#define EPPI_CTL_DLEN24                 0x00070000    /* DLEN: 24 bits */
+#define EPPI_CTL_DMIRR                  0x00080000    /* Data Mirroring */
+#define EPPI_CTL_SKIPEN                 0x00100000    /* Skip Enable */
+#define EPPI_CTL_SKIPEO                 0x00200000    /* Skip Even or Odd */
+#define EPPI_CTL_PACKEN                 0x00400000    /* Pack/Unpack Enable */
+#define EPPI_CTL_SWAPEN                 0x00800000    /* Swap Enable */
+#define EPPI_CTL_SPLTEO                 0x01000000    /* Split Even and Odd Data Samples */
+#define EPPI_CTL_SUBSPLTODD             0x02000000    /* Sub-Split Odd Samples */
+#define EPPI_CTL_SPLTWRD                0x04000000    /* Split Word */
+#define EPPI_CTL_RGBFMTEN               0x08000000    /* RGB Formatting Enable */
+#define EPPI_CTL_DMACFG                 0x10000000    /* One or Two DMA Channels Mode */
+#define EPPI_CTL_DMAFINEN               0x20000000    /* DMA Finish Enable */
+#define EPPI_CTL_MUXSEL                 0x40000000    /* MUX Select */
+#define EPPI_CTL_CLKGATEN               0x80000000    /* Clock Gating Enable */
+
+#define EPPI_FS2_WLVB_F2VBAD            0xFF000000    /* In GP transmit mode with BLANKGEN = 1, contains number of lines of vertical blanking after field 2 */
+#define EPPI_FS2_WLVB_F2VBBD            0x00FF0000    /* In GP transmit mode with BLANKGEN = 1, contains number of lines of vertical blanking before field 2 */
+#define EPPI_FS2_WLVB_F1VBAD            0x0000FF00    /* In GP transmit mode with, BLANKGEN = 1, contains number of lines of vertical blanking after field 1 */
+#define EPPI_FS2_WLVB_F1VBBD            0x000000FF    /* In GP 2, or 3 FS modes used to generate PPIx_FS2 width (32-bit). In GP Transmit mode, with BLANKGEN=1, contains the number of lines of Vertical blanking before field 1. */
+
+#define EPPI_FS2_PALPF_F2ACT            0xFFFF0000    /* Number of lines of Active Data in Field 2 */
+#define EPPI_FS2_PALPF_F1ACT            0x0000FFFF    /* Number of lines of Active Data in Field 1 */
+
+#define EPPI_IMSK_CFIFOERR              0x00000001    /* Mask CFIFO Underflow or Overflow Error Interrupt */
+#define EPPI_IMSK_YFIFOERR              0x00000002    /* Mask YFIFO Underflow or Overflow Error Interrupt */
+#define EPPI_IMSK_LTERROVR              0x00000004    /* Mask Line Track Overflow Error Interrupt */
+#define EPPI_IMSK_LTERRUNDR             0x00000008    /* Mask Line Track Underflow Error Interrupt */
+#define EPPI_IMSK_FTERROVR              0x00000010    /* Mask Frame Track Overflow Error Interrupt */
+#define EPPI_IMSK_FTERRUNDR             0x00000020    /* Mask Frame Track Underflow Error Interrupt */
+#define EPPI_IMSK_ERRNCOR               0x00000040    /* Mask ITU Preamble Error Not Corrected Interrupt */
+#define EPPI_IMSK_PXPERR                0x00000080    /* Mask PxP Ready Error Interrupt */
+
+#define EPPI_ODDCLIP_HIGHODD            0xFFFF0000
+#define EPPI_ODDCLIP_LOWODD             0x0000FFFF
+
+#define EPPI_EVENCLIP_HIGHEVEN          0xFFFF0000
+#define EPPI_EVENCLIP_LOWEVEN           0x0000FFFF
+
+#define EPPI_CTL2_FS1FINEN              0x00000002    /* HSYNC Finish Enable */
+#endif
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_sdh.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_sdh.h
new file mode 100644
index 0000000..a99957e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_sdh.h
@@ -0,0 +1,161 @@
+/*
+ * Blackfin Secure Digital Host (SDH) definitions
+ *
+ * Copyright 2008-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_SDH_H__
+#define __BFIN_SDH_H__
+
+/* Platform resources */
+struct bfin_sd_host {
+	int dma_chan;
+	int irq_int0;
+	int irq_int1;
+	u16 pin_req[7];
+};
+
+/* SDH_COMMAND bitmasks */
+#define CMD_IDX            0x3f        /* Command Index */
+#define CMD_RSP            (1 << 6)    /* Response */
+#define CMD_L_RSP          (1 << 7)    /* Long Response */
+#define CMD_INT_E          (1 << 8)    /* Command Interrupt */
+#define CMD_PEND_E         (1 << 9)    /* Command Pending */
+#define CMD_E              (1 << 10)   /* Command Enable */
+#ifdef RSI_BLKSZ
+#define CMD_CRC_CHECK_D    (1 << 11)   /* CRC Check is disabled */
+#define CMD_DATA0_BUSY     (1 << 12)   /* Check for Busy State on the DATA0 pin */
+#endif
+
+/* SDH_PWR_CTL bitmasks */
+#ifndef RSI_BLKSZ
+#define PWR_ON             0x3         /* Power On */
+#define SD_CMD_OD          (1 << 6)    /* Open Drain Output */
+#define ROD_CTL            (1 << 7)    /* Rod Control */
+#endif
+
+/* SDH_CLK_CTL bitmasks */
+#define CLKDIV             0xff        /* MC_CLK Divisor */
+#define CLK_E              (1 << 8)    /* MC_CLK Bus Clock Enable */
+#define PWR_SV_E           (1 << 9)    /* Power Save Enable */
+#define CLKDIV_BYPASS      (1 << 10)   /* Bypass Divisor */
+#define BUS_MODE_MASK      0x1800      /* Bus Mode Mask */
+#define STD_BUS_1          0x000       /* Standard Bus 1 bit mode */
+#define WIDE_BUS_4         0x800       /* Wide Bus 4 bit mode */
+#define BYTE_BUS_8         0x1000      /* Byte Bus 8 bit mode */
+
+/* SDH_RESP_CMD bitmasks */
+#define RESP_CMD           0x3f        /* Response Command */
+
+/* SDH_DATA_CTL bitmasks */
+#define DTX_E              (1 << 0)    /* Data Transfer Enable */
+#define DTX_DIR            (1 << 1)    /* Data Transfer Direction */
+#define DTX_MODE           (1 << 2)    /* Data Transfer Mode */
+#define DTX_DMA_E          (1 << 3)    /* Data Transfer DMA Enable */
+#ifndef RSI_BLKSZ
+#define DTX_BLK_LGTH       (0xf << 4)  /* Data Transfer Block Length */
+#else
+
+/* Bit masks for SDH_BLK_SIZE */
+#define DTX_BLK_LGTH       0x1fff      /* Data Transfer Block Length */
+#endif
+
+/* SDH_STATUS bitmasks */
+#define CMD_CRC_FAIL       (1 << 0)    /* CMD CRC Fail */
+#define DAT_CRC_FAIL       (1 << 1)    /* Data CRC Fail */
+#define CMD_TIME_OUT       (1 << 2)    /* CMD Time Out */
+#define DAT_TIME_OUT       (1 << 3)    /* Data Time Out */
+#define TX_UNDERRUN        (1 << 4)    /* Transmit Underrun */
+#define RX_OVERRUN         (1 << 5)    /* Receive Overrun */
+#define CMD_RESP_END       (1 << 6)    /* CMD Response End */
+#define CMD_SENT           (1 << 7)    /* CMD Sent */
+#define DAT_END            (1 << 8)    /* Data End */
+#define START_BIT_ERR      (1 << 9)    /* Start Bit Error */
+#define DAT_BLK_END        (1 << 10)   /* Data Block End */
+#define CMD_ACT            (1 << 11)   /* CMD Active */
+#define TX_ACT             (1 << 12)   /* Transmit Active */
+#define RX_ACT             (1 << 13)   /* Receive Active */
+#define TX_FIFO_STAT       (1 << 14)   /* Transmit FIFO Status */
+#define RX_FIFO_STAT       (1 << 15)   /* Receive FIFO Status */
+#define TX_FIFO_FULL       (1 << 16)   /* Transmit FIFO Full */
+#define RX_FIFO_FULL       (1 << 17)   /* Receive FIFO Full */
+#define TX_FIFO_ZERO       (1 << 18)   /* Transmit FIFO Empty */
+#define RX_DAT_ZERO        (1 << 19)   /* Receive FIFO Empty */
+#define TX_DAT_RDY         (1 << 20)   /* Transmit Data Available */
+#define RX_FIFO_RDY        (1 << 21)   /* Receive Data Available */
+
+/* SDH_STATUS_CLR bitmasks */
+#define CMD_CRC_FAIL_STAT  (1 << 0)    /* CMD CRC Fail Status */
+#define DAT_CRC_FAIL_STAT  (1 << 1)    /* Data CRC Fail Status */
+#define CMD_TIMEOUT_STAT   (1 << 2)    /* CMD Time Out Status */
+#define DAT_TIMEOUT_STAT   (1 << 3)    /* Data Time Out status */
+#define TX_UNDERRUN_STAT   (1 << 4)    /* Transmit Underrun Status */
+#define RX_OVERRUN_STAT    (1 << 5)    /* Receive Overrun Status */
+#define CMD_RESP_END_STAT  (1 << 6)    /* CMD Response End Status */
+#define CMD_SENT_STAT      (1 << 7)    /* CMD Sent Status */
+#define DAT_END_STAT       (1 << 8)    /* Data End Status */
+#define START_BIT_ERR_STAT (1 << 9)    /* Start Bit Error Status */
+#define DAT_BLK_END_STAT   (1 << 10)   /* Data Block End Status */
+
+/* SDH_MASK0 bitmasks */
+#define CMD_CRC_FAIL_MASK  (1 << 0)    /* CMD CRC Fail Mask */
+#define DAT_CRC_FAIL_MASK  (1 << 1)    /* Data CRC Fail Mask */
+#define CMD_TIMEOUT_MASK   (1 << 2)    /* CMD Time Out Mask */
+#define DAT_TIMEOUT_MASK   (1 << 3)    /* Data Time Out Mask */
+#define TX_UNDERRUN_MASK   (1 << 4)    /* Transmit Underrun Mask */
+#define RX_OVERRUN_MASK    (1 << 5)    /* Receive Overrun Mask */
+#define CMD_RESP_END_MASK  (1 << 6)    /* CMD Response End Mask */
+#define CMD_SENT_MASK      (1 << 7)    /* CMD Sent Mask */
+#define DAT_END_MASK       (1 << 8)    /* Data End Mask */
+#define START_BIT_ERR_MASK (1 << 9)    /* Start Bit Error Mask */
+#define DAT_BLK_END_MASK   (1 << 10)   /* Data Block End Mask */
+#define CMD_ACT_MASK       (1 << 11)   /* CMD Active Mask */
+#define TX_ACT_MASK        (1 << 12)   /* Transmit Active Mask */
+#define RX_ACT_MASK        (1 << 13)   /* Receive Active Mask */
+#define TX_FIFO_STAT_MASK  (1 << 14)   /* Transmit FIFO Status Mask */
+#define RX_FIFO_STAT_MASK  (1 << 15)   /* Receive FIFO Status Mask */
+#define TX_FIFO_FULL_MASK  (1 << 16)   /* Transmit FIFO Full Mask */
+#define RX_FIFO_FULL_MASK  (1 << 17)   /* Receive FIFO Full Mask */
+#define TX_FIFO_ZERO_MASK  (1 << 18)   /* Transmit FIFO Empty Mask */
+#define RX_DAT_ZERO_MASK   (1 << 19)   /* Receive FIFO Empty Mask */
+#define TX_DAT_RDY_MASK    (1 << 20)   /* Transmit Data Available Mask */
+#define RX_FIFO_RDY_MASK   (1 << 21)   /* Receive Data Available Mask */
+
+/* SDH_FIFO_CNT bitmasks */
+#define FIFO_COUNT         0x7fff      /* FIFO Count */
+
+/* SDH_E_STATUS bitmasks */
+#define SDIO_INT_DET       (1 << 1)    /* SDIO Int Detected */
+#define SD_CARD_DET        (1 << 4)    /* SD Card Detect */
+#define SD_CARD_BUSYMODE   (1 << 31)   /* Card is in Busy mode */
+#define SD_CARD_SLPMODE    (1 << 30)   /* Card in Sleep Mode */
+#define SD_CARD_READY      (1 << 17)   /* Card Ready */
+
+/* SDH_E_MASK bitmasks */
+#define SDIO_MSK           (1 << 1)    /* Mask SDIO Int Detected */
+#define SCD_MSK            (1 << 4)    /* Mask Card Detect */
+#define CARD_READY_MSK     (1 << 16)   /* Mask Card Ready */
+
+/* SDH_CFG bitmasks */
+#define CLKS_EN            (1 << 0)    /* Clocks Enable */
+#define SD4E               (1 << 2)    /* SDIO 4-Bit Enable */
+#define MWE                (1 << 3)    /* Moving Window Enable */
+#define SD_RST             (1 << 4)    /* SDMMC Reset */
+#define PUP_SDDAT          (1 << 5)    /* Pull-up SD_DAT */
+#define PUP_SDDAT3         (1 << 6)    /* Pull-up SD_DAT3 */
+#ifndef RSI_BLKSZ
+#define PD_SDDAT3          (1 << 7)    /* Pull-down SD_DAT3 */
+#else
+#define PWR_ON             0x600       /* Power On */
+#define SD_CMD_OD          (1 << 11)   /* Open Drain Output */
+#define BOOT_EN            (1 << 12)   /* Boot Enable */
+#define BOOT_MODE          (1 << 13)   /* Alternate Boot Mode */
+#define BOOT_ACK_EN        (1 << 14)   /* Boot ACK is expected */
+#endif
+
+/* SDH_RD_WAIT_EN bitmasks */
+#define RWR                (1 << 0)    /* Read Wait Request */
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_serial.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_serial.h
new file mode 100644
index 0000000..b550ada
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_serial.h
@@ -0,0 +1,429 @@
+/*
+ * bfin_serial.h - Blackfin UART/Serial definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_ASM_SERIAL_H__
+#define __BFIN_ASM_SERIAL_H__
+
+#include <linux/circ_buf.h>
+#include <linux/serial_core.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <mach/anomaly.h>
+#include <mach/bfin_serial.h>
+
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || \
+    defined(CONFIG_BFIN_UART1_CTSRTS) || \
+    defined(CONFIG_BFIN_UART2_CTSRTS) || \
+    defined(CONFIG_BFIN_UART3_CTSRTS)
+# if defined(BFIN_UART_BF54X_STYLE) || defined(BFIN_UART_BF60X_STYLE)
+#  define SERIAL_BFIN_HARD_CTSRTS
+# else
+#  define SERIAL_BFIN_CTSRTS
+# endif
+#endif
+
+struct bfin_serial_port {
+	struct uart_port port;
+	unsigned int old_status;
+	int tx_irq;
+	int rx_irq;
+	int status_irq;
+#ifndef BFIN_UART_BF54X_STYLE
+	unsigned int lsr;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	int tx_done;
+	int tx_count;
+	struct circ_buf rx_dma_buf;
+	struct timer_list rx_dma_timer;
+	int rx_dma_nrows;
+	spinlock_t rx_lock;
+	unsigned int tx_dma_channel;
+	unsigned int rx_dma_channel;
+	struct work_struct tx_dma_workqueue;
+#elif ANOMALY_05000363
+	unsigned int anomaly_threshold;
+#endif
+#if defined(SERIAL_BFIN_CTSRTS) || \
+	defined(SERIAL_BFIN_HARD_CTSRTS)
+	int cts_pin;
+	int rts_pin;
+#endif
+};
+
+#ifdef BFIN_UART_BF60X_STYLE
+
+/* UART_CTL Masks */
+#define UCEN                     0x1  /* Enable UARTx Clocks */
+#define LOOP_ENA                 0x2  /* Loopback Mode Enable */
+#define UMOD_MDB                 0x10  /* Enable MDB Mode */
+#define UMOD_IRDA                0x20  /* Enable IrDA Mode */
+#define UMOD_MASK                0x30  /* Uart Mode Mask */
+#define WLS(x)                   (((x-5) & 0x03) << 8)  /* Word Length Select */
+#define WLS_MASK                 0x300  /* Word length Select Mask */
+#define WLS_OFFSET               8      /* Word length Select Offset */
+#define STB                      0x1000  /* Stop Bits */
+#define STBH                     0x2000  /* Half Stop Bits */
+#define PEN                      0x4000  /* Parity Enable */
+#define EPS                      0x8000  /* Even Parity Select */
+#define STP                      0x10000  /* Stick Parity */
+#define FPE                      0x20000  /* Force Parity Error On Transmit */
+#define FFE                      0x40000  /* Force Framing Error On Transmit */
+#define SB                       0x80000  /* Set Break */
+#define LCR_MASK		 (SB | STP | EPS | PEN | STB | WLS_MASK)
+#define FCPOL                    0x400000  /* Flow Control Pin Polarity */
+#define RPOLC                    0x800000  /* IrDA RX Polarity Change */
+#define TPOLC                    0x1000000  /* IrDA TX Polarity Change */
+#define MRTS                     0x2000000  /* Manual Request To Send */
+#define XOFF                     0x4000000  /* Transmitter Off */
+#define ARTS                     0x8000000  /* Automatic Request To Send */
+#define ACTS                     0x10000000  /* Automatic Clear To Send */
+#define RFIT                     0x20000000  /* Receive FIFO IRQ Threshold */
+#define RFRT                     0x40000000  /* Receive FIFO RTS Threshold */
+
+/* UART_STAT Masks */
+#define DR                       0x01  /* Data Ready */
+#define OE                       0x02  /* Overrun Error */
+#define PE                       0x04  /* Parity Error */
+#define FE                       0x08  /* Framing Error */
+#define BI                       0x10  /* Break Interrupt */
+#define THRE                     0x20  /* THR Empty */
+#define TEMT                     0x80  /* TSR and UART_THR Empty */
+#define TFI                      0x100  /* Transmission Finished Indicator */
+
+#define ASTKY                    0x200  /* Address Sticky */
+#define ADDR                     0x400  /* Address bit status */
+#define RO			 0x800  /* Reception Ongoing */
+#define SCTS                     0x1000  /* Sticky CTS */
+#define CTS                      0x10000  /* Clear To Send */
+#define RFCS                     0x20000  /* Receive FIFO Count Status */
+
+/* UART_CLOCK Masks */
+#define EDBO                     0x80000000 /* Enable Devide by One */
+
+#else /* BFIN_UART_BF60X_STYLE */
+
+/* UART_LCR Masks */
+#define WLS(x)                   (((x)-5) & 0x03)  /* Word Length Select */
+#define WLS_MASK                 0x03  /* Word length Select Mask */
+#define WLS_OFFSET               0     /* Word length Select Offset */
+#define STB                      0x04  /* Stop Bits */
+#define PEN                      0x08  /* Parity Enable */
+#define EPS                      0x10  /* Even Parity Select */
+#define STP                      0x20  /* Stick Parity */
+#define SB                       0x40  /* Set Break */
+#define DLAB                     0x80  /* Divisor Latch Access */
+#define LCR_MASK		 (SB | STP | EPS | PEN | STB | WLS_MASK)
+
+/* UART_LSR Masks */
+#define DR                       0x01  /* Data Ready */
+#define OE                       0x02  /* Overrun Error */
+#define PE                       0x04  /* Parity Error */
+#define FE                       0x08  /* Framing Error */
+#define BI                       0x10  /* Break Interrupt */
+#define THRE                     0x20  /* THR Empty */
+#define TEMT                     0x40  /* TSR and UART_THR Empty */
+#define TFI                      0x80  /* Transmission Finished Indicator */
+
+/* UART_MCR Masks */
+#define XOFF                     0x01  /* Transmitter Off */
+#define MRTS                     0x02  /* Manual Request To Send */
+#define RFIT                     0x04  /* Receive FIFO IRQ Threshold */
+#define RFRT                     0x08  /* Receive FIFO RTS Threshold */
+#define LOOP_ENA                 0x10  /* Loopback Mode Enable */
+#define FCPOL                    0x20  /* Flow Control Pin Polarity */
+#define ARTS                     0x40  /* Automatic Request To Send */
+#define ACTS                     0x80  /* Automatic Clear To Send */
+
+/* UART_MSR Masks */
+#define SCTS                     0x01  /* Sticky CTS */
+#define CTS                      0x10  /* Clear To Send */
+#define RFCS                     0x20  /* Receive FIFO Count Status */
+
+/* UART_GCTL Masks */
+#define UCEN                     0x01  /* Enable UARTx Clocks */
+#define UMOD_IRDA                0x02  /* Enable IrDA Mode */
+#define UMOD_MASK                0x02  /* Uart Mode Mask */
+#define TPOLC                    0x04  /* IrDA TX Polarity Change */
+#define RPOLC                    0x08  /* IrDA RX Polarity Change */
+#define FPE                      0x10  /* Force Parity Error On Transmit */
+#define FFE                      0x20  /* Force Framing Error On Transmit */
+
+#endif /* BFIN_UART_BF60X_STYLE */
+
+/* UART_IER Masks */
+#define ERBFI                    0x01  /* Enable Receive Buffer Full Interrupt */
+#define ETBEI                    0x02  /* Enable Transmit Buffer Empty Interrupt */
+#define ELSI                     0x04  /* Enable RX Status Interrupt */
+#define EDSSI                    0x08  /* Enable Modem Status Interrupt */
+#define EDTPTI                   0x10  /* Enable DMA Transmit PIRQ Interrupt */
+#define ETFI                     0x20  /* Enable Transmission Finished Interrupt */
+#define ERFCI                    0x40  /* Enable Receive FIFO Count Interrupt */
+
+#if defined(BFIN_UART_BF60X_STYLE)
+# define OFFSET_REDIV            0x00  /* Version ID Register             */
+# define OFFSET_CTL              0x04  /* Control Register                */
+# define OFFSET_STAT             0x08  /* Status Register                 */
+# define OFFSET_SCR              0x0C  /* SCR Scratch Register            */
+# define OFFSET_CLK              0x10  /* Clock Rate Register             */
+# define OFFSET_IER              0x14  /* Interrupt Enable Register       */
+# define OFFSET_IER_SET          0x18  /* Set Interrupt Enable Register   */
+# define OFFSET_IER_CLEAR        0x1C  /* Clear Interrupt Enable Register */
+# define OFFSET_RBR              0x20  /* Receive Buffer register         */
+# define OFFSET_THR              0x24  /* Transmit Holding register       */
+#elif defined(BFIN_UART_BF54X_STYLE)
+# define OFFSET_DLL              0x00  /* Divisor Latch (Low-Byte)        */
+# define OFFSET_DLH              0x04  /* Divisor Latch (High-Byte)       */
+# define OFFSET_GCTL             0x08  /* Global Control Register         */
+# define OFFSET_LCR              0x0C  /* Line Control Register           */
+# define OFFSET_MCR              0x10  /* Modem Control Register          */
+# define OFFSET_LSR              0x14  /* Line Status Register            */
+# define OFFSET_MSR              0x18  /* Modem Status Register           */
+# define OFFSET_SCR              0x1C  /* SCR Scratch Register            */
+# define OFFSET_IER_SET          0x20  /* Set Interrupt Enable Register   */
+# define OFFSET_IER_CLEAR        0x24  /* Clear Interrupt Enable Register */
+# define OFFSET_THR              0x28  /* Transmit Holding register       */
+# define OFFSET_RBR              0x2C  /* Receive Buffer register         */
+#else /* BF533 style */
+# define OFFSET_THR              0x00  /* Transmit Holding register         */
+# define OFFSET_RBR              0x00  /* Receive Buffer register           */
+# define OFFSET_DLL              0x00  /* Divisor Latch (Low-Byte)          */
+# define OFFSET_DLH              0x04  /* Divisor Latch (High-Byte)         */
+# define OFFSET_IER              0x04  /* Interrupt Enable Register         */
+# define OFFSET_IIR              0x08  /* Interrupt Identification Register */
+# define OFFSET_LCR              0x0C  /* Line Control Register             */
+# define OFFSET_MCR              0x10  /* Modem Control Register            */
+# define OFFSET_LSR              0x14  /* Line Status Register              */
+# define OFFSET_MSR              0x18  /* Modem Status Register             */
+# define OFFSET_SCR              0x1C  /* SCR Scratch Register              */
+# define OFFSET_GCTL             0x24  /* Global Control Register           */
+/* code should not need IIR, so force build error if they use it */
+# undef OFFSET_IIR
+#endif
+
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+struct bfin_uart_regs {
+#if defined(BFIN_UART_BF60X_STYLE)
+	u32 revid;
+	u32 ctl;
+	u32 stat;
+	u32 scr;
+	u32 clk;
+	u32 ier;
+	u32 ier_set;
+	u32 ier_clear;
+	u32 rbr;
+	u32 thr;
+	u32 taip;
+	u32 tsr;
+	u32 rsr;
+	u32 txdiv;
+	u32 rxdiv;
+#elif defined(BFIN_UART_BF54X_STYLE)
+	__BFP(dll);
+	__BFP(dlh);
+	__BFP(gctl);
+	__BFP(lcr);
+	__BFP(mcr);
+	__BFP(lsr);
+	__BFP(msr);
+	__BFP(scr);
+	__BFP(ier_set);
+	__BFP(ier_clear);
+	__BFP(thr);
+	__BFP(rbr);
+#else
+	union {
+		u16 dll;
+		u16 thr;
+		const u16 rbr;
+	};
+	const u16 __pad0;
+	union {
+		u16 dlh;
+		u16 ier;
+	};
+	const u16 __pad1;
+	const __BFP(iir);
+	__BFP(lcr);
+	__BFP(mcr);
+	__BFP(lsr);
+	__BFP(msr);
+	__BFP(scr);
+	const u32 __pad2;
+	__BFP(gctl);
+#endif
+};
+#undef __BFP
+
+#define port_membase(uart)     (((struct bfin_serial_port *)(uart))->port.membase)
+
+/*
+#ifndef port_membase
+# define port_membase(p) 0
+#endif
+*/
+#ifdef BFIN_UART_BF60X_STYLE
+
+#define UART_GET_CHAR(p)      bfin_read32(port_membase(p) + OFFSET_RBR)
+#define UART_GET_CLK(p)       bfin_read32(port_membase(p) + OFFSET_CLK)
+#define UART_GET_CTL(p)       bfin_read32(port_membase(p) + OFFSET_CTL)
+#define UART_GET_GCTL(p)      UART_GET_CTL(p)
+#define UART_GET_LCR(p)       UART_GET_CTL(p)
+#define UART_GET_MCR(p)       UART_GET_CTL(p)
+#if ANOMALY_16000030
+#define UART_GET_STAT(p) \
+({ \
+	u32 __ret; \
+	unsigned long flags; \
+	flags = hard_local_irq_save(); \
+	__ret = bfin_read32(port_membase(p) + OFFSET_STAT); \
+	hard_local_irq_restore(flags); \
+	__ret; \
+})
+#else
+#define UART_GET_STAT(p)      bfin_read32(port_membase(p) + OFFSET_STAT)
+#endif
+#define UART_GET_MSR(p)       UART_GET_STAT(p)
+
+#define UART_PUT_CHAR(p, v)   bfin_write32(port_membase(p) + OFFSET_THR, v)
+#define UART_PUT_CLK(p, v)    bfin_write32(port_membase(p) + OFFSET_CLK, v)
+#define UART_PUT_CTL(p, v)    bfin_write32(port_membase(p) + OFFSET_CTL, v)
+#define UART_PUT_GCTL(p, v)   UART_PUT_CTL(p, v)
+#define UART_PUT_LCR(p, v)    UART_PUT_CTL(p, v)
+#define UART_PUT_MCR(p, v)    UART_PUT_CTL(p, v)
+#define UART_PUT_STAT(p, v)   bfin_write32(port_membase(p) + OFFSET_STAT, v)
+
+#define UART_CLEAR_IER(p, v)  bfin_write32(port_membase(p) + OFFSET_IER_CLEAR, v)
+#define UART_GET_IER(p)       bfin_read32(port_membase(p) + OFFSET_IER)
+#define UART_SET_IER(p, v)    bfin_write32(port_membase(p) + OFFSET_IER_SET, v)
+
+#define UART_CLEAR_DLAB(p)    /* MMRs not muxed on BF60x */
+#define UART_SET_DLAB(p)      /* MMRs not muxed on BF60x */
+
+#define UART_CLEAR_LSR(p)     UART_PUT_STAT(p, -1)
+#define UART_GET_LSR(p)       UART_GET_STAT(p)
+#define UART_PUT_LSR(p, v)    UART_PUT_STAT(p, v)
+
+/* This handles hard CTS/RTS */
+#define BFIN_UART_CTSRTS_HARD
+#define UART_CLEAR_SCTS(p)      UART_PUT_STAT(p, SCTS)
+#define UART_GET_CTS(x)         (UART_GET_MSR(x) & CTS)
+#define UART_DISABLE_RTS(x)     UART_PUT_MCR(x, UART_GET_MCR(x) & ~(ARTS | MRTS))
+#define UART_ENABLE_RTS(x)      UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS | ARTS)
+#define UART_ENABLE_INTS(x, v)  UART_SET_IER(x, v)
+#define UART_DISABLE_INTS(x)    UART_CLEAR_IER(x, 0xF)
+
+#else /* BFIN_UART_BF60X_STYLE */
+
+#define UART_GET_CHAR(p)      bfin_read16(port_membase(p) + OFFSET_RBR)
+#define UART_GET_DLL(p)       bfin_read16(port_membase(p) + OFFSET_DLL)
+#define UART_GET_DLH(p)       bfin_read16(port_membase(p) + OFFSET_DLH)
+#define UART_GET_CLK(p)	      ((UART_GET_DLH(p) << 8) | UART_GET_DLL(p))
+#define UART_GET_GCTL(p)      bfin_read16(port_membase(p) + OFFSET_GCTL)
+#define UART_GET_LCR(p)       bfin_read16(port_membase(p) + OFFSET_LCR)
+#define UART_GET_MCR(p)       bfin_read16(port_membase(p) + OFFSET_MCR)
+#define UART_GET_MSR(p)       bfin_read16(port_membase(p) + OFFSET_MSR)
+
+#define UART_PUT_CHAR(p, v)   bfin_write16(port_membase(p) + OFFSET_THR, v)
+#define UART_PUT_DLL(p, v)    bfin_write16(port_membase(p) + OFFSET_DLL, v)
+#define UART_PUT_DLH(p, v)    bfin_write16(port_membase(p) + OFFSET_DLH, v)
+#define UART_PUT_CLK(p, v) do \
+{\
+UART_PUT_DLL(p, v & 0xFF); \
+UART_PUT_DLH(p, (v >> 8) & 0xFF); } while (0);
+
+#define UART_PUT_GCTL(p, v)   bfin_write16(port_membase(p) + OFFSET_GCTL, v)
+#define UART_PUT_LCR(p, v)    bfin_write16(port_membase(p) + OFFSET_LCR, v)
+#define UART_PUT_MCR(p, v)    bfin_write16(port_membase(p) + OFFSET_MCR, v)
+
+#ifdef BFIN_UART_BF54X_STYLE
+
+#define UART_CLEAR_IER(p, v)  bfin_write16(port_membase(p) + OFFSET_IER_CLEAR, v)
+#define UART_GET_IER(p)       bfin_read16(port_membase(p) + OFFSET_IER_SET)
+#define UART_SET_IER(p, v)    bfin_write16(port_membase(p) + OFFSET_IER_SET, v)
+
+#define UART_CLEAR_DLAB(p)    /* MMRs not muxed on BF54x */
+#define UART_SET_DLAB(p)      /* MMRs not muxed on BF54x */
+
+#define UART_CLEAR_LSR(p)     bfin_write16(port_membase(p) + OFFSET_LSR, -1)
+#define UART_GET_LSR(p)       bfin_read16(port_membase(p) + OFFSET_LSR)
+#define UART_PUT_LSR(p, v)    bfin_write16(port_membase(p) + OFFSET_LSR, v)
+
+/* This handles hard CTS/RTS */
+#define BFIN_UART_CTSRTS_HARD
+#define UART_CLEAR_SCTS(p)      bfin_write16((port_membase(p) + OFFSET_MSR), SCTS)
+#define UART_GET_CTS(x)         (UART_GET_MSR(x) & CTS)
+#define UART_DISABLE_RTS(x)     UART_PUT_MCR(x, UART_GET_MCR(x) & ~(ARTS | MRTS))
+#define UART_ENABLE_RTS(x)      UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS | ARTS)
+#define UART_ENABLE_INTS(x, v)  UART_SET_IER(x, v)
+#define UART_DISABLE_INTS(x)    UART_CLEAR_IER(x, 0xF)
+
+#else /* BF533 style */
+
+#define UART_CLEAR_IER(p, v)  UART_PUT_IER(p, UART_GET_IER(p) & ~(v))
+#define UART_GET_IER(p)       bfin_read16(port_membase(p) + OFFSET_IER)
+#define UART_PUT_IER(p, v)    bfin_write16(port_membase(p) + OFFSET_IER, v)
+#define UART_SET_IER(p, v)    UART_PUT_IER(p, UART_GET_IER(p) | (v))
+
+#define UART_CLEAR_DLAB(p)    do { UART_PUT_LCR(p, UART_GET_LCR(p) & ~DLAB); SSYNC(); } while (0)
+#define UART_SET_DLAB(p)      do { UART_PUT_LCR(p, UART_GET_LCR(p) | DLAB); SSYNC(); } while (0)
+
+#define get_lsr_cache(uart)    (((struct bfin_serial_port *)(uart))->lsr)
+#define put_lsr_cache(uart, v) (((struct bfin_serial_port *)(uart))->lsr = (v))
+
+/*
+#ifndef put_lsr_cache
+# define put_lsr_cache(p, v)
+#endif
+#ifndef get_lsr_cache
+# define get_lsr_cache(p) 0
+#endif
+*/
+
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline void UART_CLEAR_LSR(void *p)
+{
+	put_lsr_cache(p, 0);
+	bfin_write16(port_membase(p) + OFFSET_LSR, -1);
+}
+static inline unsigned int UART_GET_LSR(void *p)
+{
+	unsigned int lsr = bfin_read16(port_membase(p) + OFFSET_LSR);
+	put_lsr_cache(p, get_lsr_cache(p) | (lsr & (BI|FE|PE|OE)));
+	return lsr | get_lsr_cache(p);
+}
+static inline void UART_PUT_LSR(void *p, uint16_t val)
+{
+	put_lsr_cache(p, get_lsr_cache(p) & ~val);
+}
+
+/* This handles soft CTS/RTS */
+#define UART_GET_CTS(x)        gpio_get_value((x)->cts_pin)
+#define UART_DISABLE_RTS(x)    gpio_set_value((x)->rts_pin, 1)
+#define UART_ENABLE_RTS(x)     gpio_set_value((x)->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x)   UART_PUT_IER(x, 0)
+
+#endif /* BFIN_UART_BF54X_STYLE */
+
+#endif /* BFIN_UART_BF60X_STYLE */
+
+#ifndef BFIN_UART_TX_FIFO_SIZE
+# define BFIN_UART_TX_FIFO_SIZE 2
+#endif
+
+#endif /* __BFIN_ASM_SERIAL_H__ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_simple_timer.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_simple_timer.h
new file mode 100644
index 0000000..b2d5e73
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_simple_timer.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _bfin_simple_timer_h_
+#define _bfin_simple_timer_h_
+
+#include <linux/ioctl.h>
+
+#define BFIN_SIMPLE_TIMER_IOCTL_MAGIC 't'
+
+#define BFIN_SIMPLE_TIMER_SET_PERIOD _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC,  2)
+#define BFIN_SIMPLE_TIMER_SET_WIDTH _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC,  3)
+#define BFIN_SIMPLE_TIMER_SET_MODE _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC,  4)
+#define BFIN_SIMPLE_TIMER_START      _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC,  6)
+#define BFIN_SIMPLE_TIMER_STOP       _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC,  8)
+#define BFIN_SIMPLE_TIMER_READ       _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 10)
+#define BFIN_SIMPLE_TIMER_READ_COUNTER _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 11)
+
+#define BFIN_SIMPLE_TIMER_MODE_PWM_ONESHOT		0
+#define BFIN_SIMPLE_TIMER_MODE_PWMOUT_CONT		1
+#define BFIN_SIMPLE_TIMER_MODE_WDTH_CAP			2
+#define BFIN_SIMPLE_TIMER_MODE_PWMOUT_CONT_NOIRQ	3
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_sport.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_sport.h
new file mode 100644
index 0000000..50b9dfd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_sport.h
@@ -0,0 +1,71 @@
+/*
+ * bfin_sport.h - interface to Blackfin SPORTs
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+#ifndef __BFIN_SPORT_H__
+#define __BFIN_SPORT_H__
+
+
+#include <linux/types.h>
+#include <uapi/asm/bfin_sport.h>
+
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+struct sport_register {
+	__BFP(tcr1);
+	__BFP(tcr2);
+	__BFP(tclkdiv);
+	__BFP(tfsdiv);
+	union {
+		u32 tx32;
+		u16 tx16;
+	};
+	u32 __pad_tx;
+	union {
+		u32 rx32;	/* use the anomaly wrapper below */
+		u16 rx16;
+	};
+	u32 __pad_rx;
+	__BFP(rcr1);
+	__BFP(rcr2);
+	__BFP(rclkdiv);
+	__BFP(rfsdiv);
+	__BFP(stat);
+	__BFP(chnl);
+	__BFP(mcmc1);
+	__BFP(mcmc2);
+	u32 mtcs0;
+	u32 mtcs1;
+	u32 mtcs2;
+	u32 mtcs3;
+	u32 mrcs0;
+	u32 mrcs1;
+	u32 mrcs2;
+	u32 mrcs3;
+};
+#undef __BFP
+
+struct bfin_snd_platform_data {
+	const unsigned short *pin_req;
+};
+
+#define bfin_read_sport_rx32(base) \
+({ \
+	struct sport_register *__mmrs = (void *)base; \
+	u32 __ret; \
+	unsigned long flags; \
+	if (ANOMALY_05000473) \
+		local_irq_save(flags); \
+	__ret = __mmrs->rx32; \
+	if (ANOMALY_05000473) \
+		local_irq_restore(flags); \
+	__ret; \
+})
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_sport3.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_sport3.h
new file mode 100644
index 0000000..d82f5fa
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_sport3.h
@@ -0,0 +1,107 @@
+/*
+ * bfin_sport - Analog Devices BF6XX SPORT registers
+ *
+ * Copyright (c) 2012 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _BFIN_SPORT3_H_
+#define _BFIN_SPORT3_H_
+
+#include <linux/types.h>
+
+#define SPORT_CTL_SPENPRI             0x00000001    /* Enable Primary Channel */
+#define SPORT_CTL_DTYPE               0x00000006    /* Data type select */
+#define SPORT_CTL_RJUSTIFY_ZFILL      0x00000000    /* DTYPE: MCM mode: Right-justify, zero-fill unused MSBs */
+#define SPORT_CTL_RJUSTIFY_SFILL      0x00000002    /* DTYPE: MCM mode: Right-justify, sign-extend unused MSBs */
+#define SPORT_CTL_USE_U_LAW           0x00000004    /* DTYPE: MCM mode: Compand using u-law */
+#define SPORT_CTL_USE_A_LAW           0x00000006    /* DTYPE: MCM mode: Compand using A-law */
+#define SPORT_CTL_LSBF                0x00000008    /* Serial bit endian select */
+#define SPORT_CTL_SLEN                0x000001F0    /* Serial Word length select */
+#define SPORT_CTL_PACK                0x00000200    /* 16-bit to 32-bit packing enable */
+#define SPORT_CTL_ICLK                0x00000400    /* Internal Clock Select */
+#define SPORT_CTL_OPMODE              0x00000800    /* Operation mode */
+#define SPORT_CTL_CKRE                0x00001000    /* Clock rising edge select */
+#define SPORT_CTL_FSR                 0x00002000    /* Frame Sync required */
+#define SPORT_CTL_IFS                 0x00004000    /* Internal Frame Sync select */
+#define SPORT_CTL_DIFS                0x00008000    /* Data-independent frame sync select */
+#define SPORT_CTL_LFS                 0x00010000    /* Active low frame sync select */
+#define SPORT_CTL_LAFS                0x00020000    /* Late Transmit frame select */
+#define SPORT_CTL_RJUST               0x00040000    /* Right Justified mode select */
+#define SPORT_CTL_FSED                0x00080000    /* External frame sync edge select */
+#define SPORT_CTL_TFIEN               0x00100000    /* Transmit finish interrupt enable select */
+#define SPORT_CTL_GCLKEN              0x00200000    /* Gated clock mode select */
+#define SPORT_CTL_SPENSEC             0x01000000    /* Enable secondary channel */
+#define SPORT_CTL_SPTRAN              0x02000000    /* Data direction control */
+#define SPORT_CTL_DERRSEC             0x04000000    /* Secondary channel error status */
+#define SPORT_CTL_DXSSEC              0x18000000    /* Secondary channel data buffer status */
+#define SPORT_CTL_SEC_EMPTY           0x00000000    /* DXSSEC: Empty */
+#define SPORT_CTL_SEC_PART_FULL       0x10000000    /* DXSSEC: Partially full */
+#define SPORT_CTL_SEC_FULL            0x18000000    /* DXSSEC: Full */
+#define SPORT_CTL_DERRPRI             0x20000000    /* Primary channel error status */
+#define SPORT_CTL_DXSPRI              0xC0000000    /* Primary channel data buffer status */
+#define SPORT_CTL_PRM_EMPTY           0x00000000    /* DXSPRI: Empty */
+#define SPORT_CTL_PRM_PART_FULL       0x80000000    /* DXSPRI: Partially full */
+#define SPORT_CTL_PRM_FULL            0xC0000000    /* DXSPRI: Full */
+
+#define SPORT_DIV_CLKDIV              0x0000FFFF    /* Clock divisor */
+#define SPORT_DIV_FSDIV               0xFFFF0000    /* Frame sync divisor */
+
+#define SPORT_MCTL_MCE                0x00000001    /* Multichannel enable */
+#define SPORT_MCTL_MCPDE              0x00000004    /* Multichannel data packing select */
+#define SPORT_MCTL_MFD                0x000000F0    /* Multichannel frame delay */
+#define SPORT_MCTL_WSIZE              0x00007F00    /* Number of multichannel slots */
+#define SPORT_MCTL_WOFFSET            0x03FF0000    /* Window offset size */
+
+#define SPORT_CNT_CLKCNT              0x0000FFFF    /* Current state of clk div counter */
+#define SPORT_CNT_FSDIVCNT            0xFFFF0000    /* Current state of frame div counter */
+
+#define SPORT_ERR_DERRPMSK            0x00000001    /* Primary channel data error interrupt enable */
+#define SPORT_ERR_DERRSMSK            0x00000002    /* Secondary channel data error interrupt enable */
+#define SPORT_ERR_FSERRMSK            0x00000004    /* Frame sync error interrupt enable */
+#define SPORT_ERR_DERRPSTAT           0x00000010    /* Primary channel data error status */
+#define SPORT_ERR_DERRSSTAT           0x00000020    /* Secondary channel data error status */
+#define SPORT_ERR_FSERRSTAT           0x00000040    /* Frame sync error status */
+
+#define SPORT_MSTAT_CURCHAN           0x000003FF    /* Channel which is being serviced in the multichannel operation */
+
+#define SPORT_CTL2_FSMUXSEL           0x00000001    /* Frame Sync MUX Select */
+#define SPORT_CTL2_CKMUXSEL           0x00000002    /* Clock MUX Select */
+#define SPORT_CTL2_LBSEL              0x00000004    /* Loopback Select */
+
+struct sport_register {
+	u32 spctl;
+	u32 div;
+	u32 spmctl;
+	u32 spcs0;
+	u32 spcs1;
+	u32 spcs2;
+	u32 spcs3;
+	u32 spcnt;
+	u32 sperrctl;
+	u32 spmstat;
+	u32 spctl2;
+	u32 txa;
+	u32 rxa;
+	u32 txb;
+	u32 rxb;
+	u32 revid;
+};
+
+struct bfin_snd_platform_data {
+	const unsigned short *pin_req;
+};
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_twi.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_twi.h
new file mode 100644
index 0000000..211e9c7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_twi.h
@@ -0,0 +1,214 @@
+/*
+ * bfin_twi.h - interface to Blackfin TWIs
+ *
+ * Copyright 2005-2014 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_TWI_H__
+#define __ASM_BFIN_TWI_H__
+
+#include <asm/blackfin.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+
+/*
+ * ADI twi registers layout
+ */
+struct bfin_twi_regs {
+	u16 clkdiv;
+	u16 dummy1;
+	u16 control;
+	u16 dummy2;
+	u16 slave_ctl;
+	u16 dummy3;
+	u16 slave_stat;
+	u16 dummy4;
+	u16 slave_addr;
+	u16 dummy5;
+	u16 master_ctl;
+	u16 dummy6;
+	u16 master_stat;
+	u16 dummy7;
+	u16 master_addr;
+	u16 dummy8;
+	u16 int_stat;
+	u16 dummy9;
+	u16 int_mask;
+	u16 dummy10;
+	u16 fifo_ctl;
+	u16 dummy11;
+	u16 fifo_stat;
+	u16 dummy12;
+	u32 __pad[20];
+	u16 xmt_data8;
+	u16 dummy13;
+	u16 xmt_data16;
+	u16 dummy14;
+	u16 rcv_data8;
+	u16 dummy15;
+	u16 rcv_data16;
+	u16 dummy16;
+};
+
+struct bfin_twi_iface {
+	int			irq;
+	spinlock_t		lock;
+	char			read_write;
+	u8			command;
+	u8			*transPtr;
+	int			readNum;
+	int			writeNum;
+	int			cur_mode;
+	int			manual_stop;
+	int			result;
+	struct i2c_adapter	adap;
+	struct completion	complete;
+	struct i2c_msg		*pmsg;
+	int			msg_num;
+	int			cur_msg;
+	u16			saved_clkdiv;
+	u16			saved_control;
+	struct bfin_twi_regs __iomem *regs_base;
+};
+
+/*  ********************  TWO-WIRE INTERFACE (TWI) MASKS  ********************/
+/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  ) */
+#define	CLKLOW(x)	((x) & 0xFF)	/* Periods Clock Is Held Low */
+#define CLKHI(y)	(((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
+
+/* TWI_PRESCALE Masks */
+#define	PRESCALE	0x007F	/* SCLKs Per Internal Time Reference (10MHz) */
+#define	TWI_ENA		0x0080	/* TWI Enable */
+#define	SCCB		0x0200	/* SCCB Compatibility Enable */
+
+/* TWI_SLAVE_CTL Masks */
+#define	SEN		0x0001	/* Slave Enable */
+#define	SADD_LEN	0x0002	/* Slave Address Length */
+#define	STDVAL		0x0004	/* Slave Transmit Data Valid */
+#define	NAK		0x0008	/* NAK Generated At Conclusion Of Transfer */
+#define	GEN		0x0010	/* General Call Address Matching Enabled */
+
+/* TWI_SLAVE_STAT Masks	*/
+#define	SDIR		0x0001	/* Slave Transfer Direction (RX/TX*) */
+#define GCALL		0x0002	/* General Call Indicator */
+
+/* TWI_MASTER_CTL Masks	*/
+#define	MEN		0x0001	/* Master Mode Enable          */
+#define	MADD_LEN	0x0002	/* Master Address Length       */
+#define	MDIR		0x0004	/* Master Transmit Direction (RX/TX*) */
+#define	FAST		0x0008	/* Use Fast Mode Timing Specs  */
+#define	STOP		0x0010	/* Issue Stop Condition        */
+#define	RSTART		0x0020	/* Repeat Start or Stop* At End Of Transfer */
+#define	DCNT		0x3FC0	/* Data Bytes To Transfer      */
+#define	SDAOVR		0x4000	/* Serial Data Override        */
+#define	SCLOVR		0x8000	/* Serial Clock Override       */
+
+/* TWI_MASTER_STAT Masks */
+#define	MPROG		0x0001	/* Master Transfer In Progress */
+#define	LOSTARB		0x0002	/* Lost Arbitration Indicator (Xfer Aborted) */
+#define	ANAK		0x0004	/* Address Not Acknowledged    */
+#define	DNAK		0x0008	/* Data Not Acknowledged       */
+#define	BUFRDERR	0x0010	/* Buffer Read Error           */
+#define	BUFWRERR	0x0020	/* Buffer Write Error          */
+#define	SDASEN		0x0040	/* Serial Data Sense           */
+#define	SCLSEN		0x0080	/* Serial Clock Sense          */
+#define	BUSBUSY		0x0100	/* Bus Busy Indicator          */
+
+/* TWI_INT_SRC and TWI_INT_ENABLE Masks	*/
+#define	SINIT		0x0001	/* Slave Transfer Initiated    */
+#define	SCOMP		0x0002	/* Slave Transfer Complete     */
+#define	SERR		0x0004	/* Slave Transfer Error        */
+#define	SOVF		0x0008	/* Slave Overflow              */
+#define	MCOMP		0x0010	/* Master Transfer Complete    */
+#define	MERR		0x0020	/* Master Transfer Error       */
+#define	XMTSERV		0x0040	/* Transmit FIFO Service       */
+#define	RCVSERV		0x0080	/* Receive FIFO Service        */
+
+/* TWI_FIFO_CTRL Masks */
+#define	XMTFLUSH	0x0001	/* Transmit Buffer Flush                 */
+#define	RCVFLUSH	0x0002	/* Receive Buffer Flush                  */
+#define	XMTINTLEN	0x0004	/* Transmit Buffer Interrupt Length      */
+#define	RCVINTLEN	0x0008	/* Receive Buffer Interrupt Length       */
+
+/* TWI_FIFO_STAT Masks */
+#define	XMTSTAT		0x0003	/* Transmit FIFO Status                  */
+#define	XMT_EMPTY	0x0000	/* Transmit FIFO Empty                   */
+#define	XMT_HALF	0x0001	/* Transmit FIFO Has 1 Byte To Write     */
+#define	XMT_FULL	0x0003	/* Transmit FIFO Full (2 Bytes To Write) */
+
+#define	RCVSTAT		0x000C	/* Receive FIFO Status                   */
+#define	RCV_EMPTY	0x0000	/* Receive FIFO Empty                    */
+#define	RCV_HALF	0x0004	/* Receive FIFO Has 1 Byte To Read       */
+#define	RCV_FULL	0x000C	/* Receive FIFO Full (2 Bytes To Read)   */
+
+#define DEFINE_TWI_REG(reg_name, reg) \
+static inline u16 read_##reg_name(struct bfin_twi_iface *iface) \
+	{ return bfin_read16(&iface->regs_base->reg); } \
+static inline void write_##reg_name(struct bfin_twi_iface *iface, u16 v) \
+	{ bfin_write16(&iface->regs_base->reg, v); }
+
+DEFINE_TWI_REG(CLKDIV, clkdiv)
+DEFINE_TWI_REG(SLAVE_CTL, slave_ctl)
+DEFINE_TWI_REG(SLAVE_STAT, slave_stat)
+DEFINE_TWI_REG(SLAVE_ADDR, slave_addr)
+DEFINE_TWI_REG(MASTER_CTL, master_ctl)
+DEFINE_TWI_REG(MASTER_STAT, master_stat)
+DEFINE_TWI_REG(MASTER_ADDR, master_addr)
+DEFINE_TWI_REG(INT_STAT, int_stat)
+DEFINE_TWI_REG(INT_MASK, int_mask)
+DEFINE_TWI_REG(FIFO_STAT, fifo_stat)
+DEFINE_TWI_REG(XMT_DATA8, xmt_data8)
+DEFINE_TWI_REG(XMT_DATA16, xmt_data16)
+#if !ANOMALY_16000030
+DEFINE_TWI_REG(RCV_DATA8, rcv_data8)
+DEFINE_TWI_REG(RCV_DATA16, rcv_data16)
+#else
+static inline u16 read_RCV_DATA8(struct bfin_twi_iface *iface)
+{
+	u16 ret;
+	unsigned long flags;
+
+	flags = hard_local_irq_save();
+	ret = bfin_read16(&iface->regs_base->rcv_data8);
+	hard_local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline u16 read_RCV_DATA16(struct bfin_twi_iface *iface)
+{
+	u16 ret;
+	unsigned long flags;
+
+	flags = hard_local_irq_save();
+	ret = bfin_read16(&iface->regs_base->rcv_data16);
+	hard_local_irq_restore(flags);
+
+	return ret;
+}
+#endif
+
+static inline u16 read_FIFO_CTL(struct bfin_twi_iface *iface)
+{
+	return bfin_read16(&iface->regs_base->fifo_ctl);
+}
+
+static inline void write_FIFO_CTL(struct bfin_twi_iface *iface, u16 v)
+{
+	bfin_write16(&iface->regs_base->fifo_ctl, v);
+	SSYNC();
+}
+
+static inline u16 read_CONTROL(struct bfin_twi_iface *iface)
+{
+	return bfin_read16(&iface->regs_base->control);
+}
+
+static inline void write_CONTROL(struct bfin_twi_iface *iface, u16 v)
+{
+	SSYNC();
+	bfin_write16(&iface->regs_base->control, v);
+}
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_watchdog.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_watchdog.h
new file mode 100644
index 0000000..dce0982
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfin_watchdog.h
@@ -0,0 +1,30 @@
+/*
+ * bfin_watchdog.h - Blackfin watchdog definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BFIN_WATCHDOG_H
+#define _BFIN_WATCHDOG_H
+
+/* Bit in SWRST that indicates boot caused by watchdog */
+#define SWRST_RESET_WDOG 0x4000
+
+/* Bit in WDOG_CTL that indicates watchdog has expired (WDR0) */
+#define WDOG_EXPIRED 0x8000
+
+/* Masks for WDEV field in WDOG_CTL register */
+#define ICTL_RESET   0x0
+#define ICTL_NMI     0x2
+#define ICTL_GPI     0x4
+#define ICTL_NONE    0x6
+#define ICTL_MASK    0x6
+
+/* Masks for WDEN field in WDOG_CTL register */
+#define WDEN_MASK    0x0FF0
+#define WDEN_ENABLE  0x0000
+#define WDEN_DISABLE 0x0AD0
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfrom.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfrom.h
new file mode 100644
index 0000000..9e4be5e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bfrom.h
@@ -0,0 +1,90 @@
+/* Blackfin on-chip ROM API
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFROM_H__
+#define __BFROM_H__
+
+#include <linux/types.h>
+
+/* Possible syscontrol action flags */
+#define SYSCTRL_READ        0x00000000    /* read registers */
+#define SYSCTRL_WRITE       0x00000001    /* write registers */
+#define SYSCTRL_SYSRESET    0x00000002    /* perform system reset */
+#define SYSCTRL_CORERESET   0x00000004    /* perform core reset */
+#define SYSCTRL_SOFTRESET   0x00000006    /* perform core and system reset */
+#define SYSCTRL_VRCTL       0x00000010    /* read/write VR_CTL register */
+#define SYSCTRL_EXTVOLTAGE  0x00000020    /* VDDINT supplied externally */
+#define SYSCTRL_INTVOLTAGE  0x00000000    /* VDDINT generated by on-chip regulator */
+#define SYSCTRL_OTPVOLTAGE  0x00000040    /* For Factory Purposes Only */
+#define SYSCTRL_PLLCTL      0x00000100    /* read/write PLL_CTL register */
+#define SYSCTRL_PLLDIV      0x00000200    /* read/write PLL_DIV register */
+#define SYSCTRL_LOCKCNT     0x00000400    /* read/write PLL_LOCKCNT register */
+#define SYSCTRL_PLLSTAT     0x00000800    /* read/write PLL_STAT register */
+
+typedef struct ADI_SYSCTRL_VALUES {
+	uint16_t uwVrCtl;
+	uint16_t uwPllCtl;
+	uint16_t uwPllDiv;
+	uint16_t uwPllLockCnt;
+	uint16_t uwPllStat;
+} ADI_SYSCTRL_VALUES;
+
+static uint32_t (* const bfrom_SysControl)(uint32_t action_flags, ADI_SYSCTRL_VALUES *power_settings, void *reserved) = (void *)0xEF000038;
+
+/* We need a dedicated function since we need to screw with the stack pointer
+ * when resetting.  The on-chip ROM will save/restore registers on the stack
+ * when doing a system reset, so the stack cannot be outside of the chip.
+ */
+__attribute__((__noreturn__))
+static inline void bfrom_SoftReset(void *new_stack)
+{
+	while (1)
+		/*
+		 * We don't declare the SP as clobbered on purpose, since
+		 * it confuses the heck out of the compiler, and this function
+		 * never returns
+		 */
+		__asm__ __volatile__(
+			"sp = %[stack];"
+			"jump (%[bfrom_syscontrol]);"
+			: : [bfrom_syscontrol] "p"(bfrom_SysControl),
+				"q0"(SYSCTRL_SOFTRESET),
+				"q1"(0),
+				"q2"(NULL),
+				[stack] "p"(new_stack)
+		);
+}
+
+/* OTP Functions */
+static uint32_t (* const bfrom_OtpCommand)(uint32_t command, uint32_t value) = (void *)0xEF000018;
+static uint32_t (* const bfrom_OtpRead)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)0xEF00001A;
+static uint32_t (* const bfrom_OtpWrite)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)0xEF00001C;
+
+/* otp command: defines for "command" */
+#define OTP_INIT                 0x00000001
+#define OTP_CLOSE                0x00000002
+
+/* otp read/write: defines for "flags" */
+#define OTP_LOWER_HALF           0x00000000 /* select upper/lower 64-bit half (bit 0) */
+#define OTP_UPPER_HALF           0x00000001
+#define OTP_NO_ECC               0x00000010 /* do not use ECC */
+#define OTP_LOCK                 0x00000020 /* sets page protection bit for page */
+#define OTP_CHECK_FOR_PREV_WRITE 0x00000080
+
+/* Return values for all functions */
+#define OTP_SUCCESS          0x00000000
+#define OTP_MASTER_ERROR     0x001
+#define OTP_WRITE_ERROR      0x003
+#define OTP_READ_ERROR       0x005
+#define OTP_ACC_VIO_ERROR    0x009
+#define OTP_DATA_MULT_ERROR  0x011
+#define OTP_ECC_MULT_ERROR   0x021
+#define OTP_PREV_WR_ERROR    0x041
+#define OTP_DATA_SB_WARN     0x100
+#define OTP_ECC_SB_WARN      0x200
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bitops.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bitops.h
new file mode 100644
index 0000000..b298b65
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bitops.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BLACKFIN_BITOPS_H
+#define _BLACKFIN_BITOPS_H
+
+#include <linux/compiler.h>
+
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/const_hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+#include <asm-generic/bitops/ext2-atomic.h>
+
+#include <asm/barrier.h>
+
+#ifndef CONFIG_SMP
+#include <linux/irqflags.h>
+/*
+ * clear_bit may not imply a memory barrier
+ */
+#include <asm-generic/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
+#else
+
+#include <asm/byteorder.h>	/* swab32 */
+#include <linux/linkage.h>
+
+asmlinkage int __raw_bit_set_asm(volatile unsigned long *addr, int nr);
+
+asmlinkage int __raw_bit_clear_asm(volatile unsigned long *addr, int nr);
+
+asmlinkage int __raw_bit_toggle_asm(volatile unsigned long *addr, int nr);
+
+asmlinkage int __raw_bit_test_set_asm(volatile unsigned long *addr, int nr);
+
+asmlinkage int __raw_bit_test_clear_asm(volatile unsigned long *addr, int nr);
+
+asmlinkage int __raw_bit_test_toggle_asm(volatile unsigned long *addr, int nr);
+
+asmlinkage int __raw_bit_test_asm(const volatile unsigned long *addr, int nr);
+
+static inline void set_bit(int nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr + (nr >> 5);
+	__raw_bit_set_asm(a, nr & 0x1f);
+}
+
+static inline void clear_bit(int nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr + (nr >> 5);
+	__raw_bit_clear_asm(a, nr & 0x1f);
+}
+
+static inline void change_bit(int nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr + (nr >> 5);
+	__raw_bit_toggle_asm(a, nr & 0x1f);
+}
+
+static inline int test_bit(int nr, const volatile unsigned long *addr)
+{
+	volatile const unsigned long *a = addr + (nr >> 5);
+	return __raw_bit_test_asm(a, nr & 0x1f) != 0;
+}
+
+static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr + (nr >> 5);
+	return __raw_bit_test_set_asm(a, nr & 0x1f);
+}
+
+static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr + (nr >> 5);
+	return __raw_bit_test_clear_asm(a, nr & 0x1f);
+}
+
+static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr + (nr >> 5);
+	return __raw_bit_test_toggle_asm(a, nr & 0x1f);
+}
+
+#define test_bit __skip_test_bit
+#include <asm-generic/bitops/non-atomic.h>
+#undef test_bit
+
+#endif /* CONFIG_SMP */
+
+/* Needs to be after test_bit and friends */
+#include <asm-generic/bitops/le.h>
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+static inline unsigned int __arch_hweight32(unsigned int w)
+{
+	unsigned int res;
+
+	__asm__ ("%0.l = ONES %1;"
+		"%0 = %0.l (Z);"
+		: "=d" (res) : "d" (w));
+	return res;
+}
+
+static inline unsigned int __arch_hweight64(__u64 w)
+{
+	return __arch_hweight32((unsigned int)(w >> 32)) +
+	       __arch_hweight32((unsigned int)w);
+}
+
+static inline unsigned int __arch_hweight16(unsigned int w)
+{
+	return __arch_hweight32(w & 0xffff);
+}
+
+static inline unsigned int __arch_hweight8(unsigned int w)
+{
+	return __arch_hweight32(w & 0xff);
+}
+
+#endif				/* _BLACKFIN_BITOPS_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/blackfin.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/blackfin.h
new file mode 100644
index 0000000..f111f36
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/blackfin.h
@@ -0,0 +1,88 @@
+/*
+ * Common header file for Blackfin family of processors.
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BLACKFIN_H_
+#define _BLACKFIN_H_
+
+#include <mach/anomaly.h>
+
+#ifndef __ASSEMBLY__
+
+/* SSYNC implementation for C file */
+static inline void SSYNC(void)
+{
+	int _tmp;
+	if (ANOMALY_05000312 || ANOMALY_05000244)
+		__asm__ __volatile__(
+			"cli %0;"
+			"nop;"
+			"nop;"
+			"nop;"
+			"ssync;"
+			"sti %0;"
+			: "=d" (_tmp)
+		);
+	else
+		__asm__ __volatile__("ssync;");
+}
+
+/* CSYNC implementation for C file */
+static inline void CSYNC(void)
+{
+	int _tmp;
+	if (ANOMALY_05000312 || ANOMALY_05000244)
+		__asm__ __volatile__(
+			"cli %0;"
+			"nop;"
+			"nop;"
+			"nop;"
+			"csync;"
+			"sti %0;"
+			: "=d" (_tmp)
+		);
+	else
+		__asm__ __volatile__("csync;");
+}
+
+#else  /* __ASSEMBLY__ */
+
+#define LO(con32) ((con32) & 0xFFFF)
+#define lo(con32) ((con32) & 0xFFFF)
+#define HI(con32) (((con32) >> 16) & 0xFFFF)
+#define hi(con32) (((con32) >> 16) & 0xFFFF)
+
+/* SSYNC & CSYNC implementations for assembly files */
+
+#define ssync(x) SSYNC(x)
+#define csync(x) CSYNC(x)
+
+#if ANOMALY_05000312 || ANOMALY_05000244
+#define SSYNC(scratch)	\
+	cli scratch;	\
+	nop; nop; nop;	\
+	SSYNC;		\
+	sti scratch;
+
+#define CSYNC(scratch)	\
+	cli scratch;	\
+	nop; nop; nop;	\
+	CSYNC;		\
+	sti scratch;
+
+#else
+#define SSYNC(scratch) SSYNC;
+#define CSYNC(scratch) CSYNC;
+#endif /* ANOMALY_05000312 & ANOMALY_05000244 handling */
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm/mem_map.h>
+#include <mach/blackfin.h>
+#include <asm/bfin-global.h>
+
+#endif				/* _BLACKFIN_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/bug.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bug.h
new file mode 100644
index 0000000..76b2e82
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/bug.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BLACKFIN_BUG_H
+#define _BLACKFIN_BUG_H
+
+#ifdef CONFIG_BUG
+
+/*
+ * This can be any undefined 16-bit opcode, meaning
+ * ((opcode & 0xc000) != 0xc000)
+ * Anything from 0x0001 to 0x000A (inclusive) will work
+ */
+#define BFIN_BUG_OPCODE	0x0001
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+
+#define _BUG_OR_WARN(flags)						\
+	asm volatile(							\
+		"1:	.hword	%0\n"					\
+		"	.section __bug_table,\"aw\",@progbits\n"	\
+		"2:	.long	1b\n"					\
+		"	.long	%1\n"					\
+		"	.short	%2\n"					\
+		"	.short	%3\n"					\
+		"	.org	2b + %4\n"				\
+		"	.previous"					\
+		:							\
+		: "i"(BFIN_BUG_OPCODE), "i"(__FILE__),			\
+		  "i"(__LINE__), "i"(flags),				\
+		  "i"(sizeof(struct bug_entry)))
+
+#else
+
+#define _BUG_OR_WARN(flags)						\
+	asm volatile(							\
+		"1:	.hword	%0\n"					\
+		"	.section __bug_table,\"aw\",@progbits\n"	\
+		"2:	.long	1b\n"					\
+		"	.short	%1\n"					\
+		"	.org	2b + %2\n"				\
+		"	.previous"					\
+		:							\
+		: "i"(BFIN_BUG_OPCODE), "i"(flags),			\
+		  "i"(sizeof(struct bug_entry)))
+
+#endif /* CONFIG_DEBUG_BUGVERBOSE */
+
+#define BUG()								\
+	do {								\
+		_BUG_OR_WARN(0);					\
+		unreachable();						\
+	} while (0)
+
+#define WARN_ON(condition)							\
+	({								\
+		int __ret_warn_on = !!(condition);			\
+		if (unlikely(__ret_warn_on))				\
+			_BUG_OR_WARN(BUGFLAG_WARNING);			\
+		unlikely(__ret_warn_on);				\
+	})
+
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_WARN_ON
+
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/cache.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/cache.h
new file mode 100644
index 0000000..568885a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/cache.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ARCH_BLACKFIN_CACHE_H
+#define __ARCH_BLACKFIN_CACHE_H
+
+#include <linux/linkage.h>	/* for asmlinkage */
+
+/*
+ * Bytes per L1 cache line
+ * Blackfin loads 32 bytes for cache
+ */
+#define L1_CACHE_SHIFT	5
+#define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
+#define SMP_CACHE_BYTES	L1_CACHE_BYTES
+
+#define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
+
+#ifdef CONFIG_SMP
+#define __cacheline_aligned
+#else
+#define ____cacheline_aligned
+
+/*
+ * Put cacheline_aliged data to L1 data memory
+ */
+#ifdef CONFIG_CACHELINE_ALIGNED_L1
+#define __cacheline_aligned				\
+	  __attribute__((__aligned__(L1_CACHE_BYTES),	\
+		__section__(".data_l1.cacheline_aligned")))
+#endif
+
+#endif
+
+/*
+ * largest L1 which this arch supports
+ */
+#define L1_CACHE_SHIFT_MAX	5
+
+#if defined(CONFIG_SMP) && \
+    !defined(CONFIG_BFIN_CACHE_COHERENT)
+# if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE)
+# define __ARCH_SYNC_CORE_ICACHE
+# endif
+# if defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE)
+# define __ARCH_SYNC_CORE_DCACHE
+# endif
+#ifndef __ASSEMBLY__
+asmlinkage void __raw_smp_mark_barrier_asm(void);
+asmlinkage void __raw_smp_check_barrier_asm(void);
+
+static inline void smp_mark_barrier(void)
+{
+	__raw_smp_mark_barrier_asm();
+}
+static inline void smp_check_barrier(void)
+{
+	__raw_smp_check_barrier_asm();
+}
+
+void resync_core_dcache(void);
+void resync_core_icache(void);
+#endif
+#endif
+
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/cacheflush.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/cacheflush.h
new file mode 100644
index 0000000..9a5b2c5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/cacheflush.h
@@ -0,0 +1,118 @@
+/*
+ * Blackfin low-level cache routines
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BLACKFIN_CACHEFLUSH_H
+#define _BLACKFIN_CACHEFLUSH_H
+
+#include <asm/blackfin.h>	/* for SSYNC() */
+#include <asm/sections.h>	/* for _ramend */
+#ifdef CONFIG_SMP
+#include <asm/smp.h>
+#endif
+
+extern void blackfin_icache_flush_range(unsigned long start_address, unsigned long end_address);
+extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned long end_address);
+extern void blackfin_dcache_invalidate_range(unsigned long start_address, unsigned long end_address);
+extern void blackfin_dflush_page(void *page);
+extern void blackfin_invalidate_entire_dcache(void);
+extern void blackfin_invalidate_entire_icache(void);
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr)		do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#ifdef CONFIG_SMP
+#define flush_icache_range_others(start, end)	\
+	smp_icache_flush_range_others((start), (end))
+#else
+#define flush_icache_range_others(start, end)	do { } while (0)
+#endif
+
+static inline void flush_icache_range(unsigned start, unsigned end)
+{
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK)
+	if (end <= physical_mem_end)
+		blackfin_dcache_flush_range(start, end);
+#endif
+#if defined(CONFIG_BFIN_L2_WRITEBACK)
+	if (start >= L2_START && end <= L2_START + L2_LENGTH)
+		blackfin_dcache_flush_range(start, end);
+#endif
+
+	/* Make sure all write buffers in the data side of the core
+	 * are flushed before trying to invalidate the icache.  This
+	 * needs to be after the data flush and before the icache
+	 * flush so that the SSYNC does the right thing in preventing
+	 * the instruction prefetcher from hitting things in cached
+	 * memory at the wrong time -- it runs much further ahead than
+	 * the pipeline.
+	 */
+	SSYNC();
+#if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE)
+	if (end <= physical_mem_end) {
+		blackfin_icache_flush_range(start, end);
+		flush_icache_range_others(start, end);
+	}
+#endif
+#if defined(CONFIG_BFIN_L2_ICACHEABLE)
+	if (start >= L2_START && end <= L2_START + L2_LENGTH) {
+		blackfin_icache_flush_range(start, end);
+		flush_icache_range_others(start, end);
+	}
+#endif
+}
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
+do { memcpy(dst, src, len);						\
+     flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len));	\
+} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)	memcpy(dst, src, len)
+
+#if defined(CONFIG_BFIN_DCACHE)
+# define invalidate_dcache_range(start,end)	blackfin_dcache_invalidate_range((start), (end))
+#else
+# define invalidate_dcache_range(start,end)	do { } while (0)
+#endif
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
+# define flush_dcache_range(start,end)		blackfin_dcache_flush_range((start), (end))
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
+# define flush_dcache_page(page)		blackfin_dflush_page(page_address(page))
+#else
+# define flush_dcache_range(start,end)		do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
+# define flush_dcache_page(page)		do { } while (0)
+#endif
+
+extern unsigned long reserved_mem_dcache_on;
+extern unsigned long reserved_mem_icache_on;
+
+static inline int bfin_addr_dcacheable(unsigned long addr)
+{
+#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
+	if (addr < (_ramend - DMA_UNCACHED_REGION))
+		return 1;
+#endif
+
+	if (reserved_mem_dcache_on &&
+		addr >= _ramend && addr < physical_mem_end)
+		return 1;
+
+#ifdef CONFIG_BFIN_L2_DCACHEABLE
+	if (addr >= L2_START && addr < L2_START + L2_LENGTH)
+		return 1;
+#endif
+
+	return 0;
+}
+
+#endif				/* _BLACKFIN_ICACHEFLUSH_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/cdef_LPBlackfin.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/cdef_LPBlackfin.h
new file mode 100644
index 0000000..59af63c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/cdef_LPBlackfin.h
@@ -0,0 +1,309 @@
+/*
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _CDEF_LPBLACKFIN_H
+#define _CDEF_LPBLACKFIN_H
+
+/*#if !defined(__ADSPLPBLACKFIN__)
+#warning cdef_LPBlackfin.h should only be included for 532 compatible chips.
+#endif
+*/
+#include <asm/def_LPBlackfin.h>
+
+/*Cache & SRAM Memory*/
+#define bfin_read_SRAM_BASE_ADDRESS()        bfin_read32(SRAM_BASE_ADDRESS)
+#define bfin_write_SRAM_BASE_ADDRESS(val)    bfin_write32(SRAM_BASE_ADDRESS,val)
+#define bfin_read_DMEM_CONTROL()             bfin_read32(DMEM_CONTROL)
+#define bfin_write_DMEM_CONTROL(val)         bfin_write32(DMEM_CONTROL,val)
+#define bfin_read_DCPLB_STATUS()             bfin_read32(DCPLB_STATUS)
+#define bfin_write_DCPLB_STATUS(val)         bfin_write32(DCPLB_STATUS,val)
+#define bfin_read_DCPLB_FAULT_ADDR()         bfin_read32(DCPLB_FAULT_ADDR)
+#define bfin_write_DCPLB_FAULT_ADDR(val)     bfin_write32(DCPLB_FAULT_ADDR,val)
+/*
+#define MMR_TIMEOUT            0xFFE00010
+*/
+#define bfin_read_DCPLB_ADDR0()              bfin_read32(DCPLB_ADDR0)
+#define bfin_write_DCPLB_ADDR0(val)          bfin_write32(DCPLB_ADDR0,val)
+#define bfin_read_DCPLB_ADDR1()              bfin_read32(DCPLB_ADDR1)
+#define bfin_write_DCPLB_ADDR1(val)          bfin_write32(DCPLB_ADDR1,val)
+#define bfin_read_DCPLB_ADDR2()              bfin_read32(DCPLB_ADDR2)
+#define bfin_write_DCPLB_ADDR2(val)          bfin_write32(DCPLB_ADDR2,val)
+#define bfin_read_DCPLB_ADDR3()              bfin_read32(DCPLB_ADDR3)
+#define bfin_write_DCPLB_ADDR3(val)          bfin_write32(DCPLB_ADDR3,val)
+#define bfin_read_DCPLB_ADDR4()              bfin_read32(DCPLB_ADDR4)
+#define bfin_write_DCPLB_ADDR4(val)          bfin_write32(DCPLB_ADDR4,val)
+#define bfin_read_DCPLB_ADDR5()              bfin_read32(DCPLB_ADDR5)
+#define bfin_write_DCPLB_ADDR5(val)          bfin_write32(DCPLB_ADDR5,val)
+#define bfin_read_DCPLB_ADDR6()              bfin_read32(DCPLB_ADDR6)
+#define bfin_write_DCPLB_ADDR6(val)          bfin_write32(DCPLB_ADDR6,val)
+#define bfin_read_DCPLB_ADDR7()              bfin_read32(DCPLB_ADDR7)
+#define bfin_write_DCPLB_ADDR7(val)          bfin_write32(DCPLB_ADDR7,val)
+#define bfin_read_DCPLB_ADDR8()              bfin_read32(DCPLB_ADDR8)
+#define bfin_write_DCPLB_ADDR8(val)          bfin_write32(DCPLB_ADDR8,val)
+#define bfin_read_DCPLB_ADDR9()              bfin_read32(DCPLB_ADDR9)
+#define bfin_write_DCPLB_ADDR9(val)          bfin_write32(DCPLB_ADDR9,val)
+#define bfin_read_DCPLB_ADDR10()             bfin_read32(DCPLB_ADDR10)
+#define bfin_write_DCPLB_ADDR10(val)         bfin_write32(DCPLB_ADDR10,val)
+#define bfin_read_DCPLB_ADDR11()             bfin_read32(DCPLB_ADDR11)
+#define bfin_write_DCPLB_ADDR11(val)         bfin_write32(DCPLB_ADDR11,val)
+#define bfin_read_DCPLB_ADDR12()             bfin_read32(DCPLB_ADDR12)
+#define bfin_write_DCPLB_ADDR12(val)         bfin_write32(DCPLB_ADDR12,val)
+#define bfin_read_DCPLB_ADDR13()             bfin_read32(DCPLB_ADDR13)
+#define bfin_write_DCPLB_ADDR13(val)         bfin_write32(DCPLB_ADDR13,val)
+#define bfin_read_DCPLB_ADDR14()             bfin_read32(DCPLB_ADDR14)
+#define bfin_write_DCPLB_ADDR14(val)         bfin_write32(DCPLB_ADDR14,val)
+#define bfin_read_DCPLB_ADDR15()             bfin_read32(DCPLB_ADDR15)
+#define bfin_write_DCPLB_ADDR15(val)         bfin_write32(DCPLB_ADDR15,val)
+#define bfin_read_DCPLB_DATA0()              bfin_read32(DCPLB_DATA0)
+#define bfin_write_DCPLB_DATA0(val)          bfin_write32(DCPLB_DATA0,val)
+#define bfin_read_DCPLB_DATA1()              bfin_read32(DCPLB_DATA1)
+#define bfin_write_DCPLB_DATA1(val)          bfin_write32(DCPLB_DATA1,val)
+#define bfin_read_DCPLB_DATA2()              bfin_read32(DCPLB_DATA2)
+#define bfin_write_DCPLB_DATA2(val)          bfin_write32(DCPLB_DATA2,val)
+#define bfin_read_DCPLB_DATA3()              bfin_read32(DCPLB_DATA3)
+#define bfin_write_DCPLB_DATA3(val)          bfin_write32(DCPLB_DATA3,val)
+#define bfin_read_DCPLB_DATA4()              bfin_read32(DCPLB_DATA4)
+#define bfin_write_DCPLB_DATA4(val)          bfin_write32(DCPLB_DATA4,val)
+#define bfin_read_DCPLB_DATA5()              bfin_read32(DCPLB_DATA5)
+#define bfin_write_DCPLB_DATA5(val)          bfin_write32(DCPLB_DATA5,val)
+#define bfin_read_DCPLB_DATA6()              bfin_read32(DCPLB_DATA6)
+#define bfin_write_DCPLB_DATA6(val)          bfin_write32(DCPLB_DATA6,val)
+#define bfin_read_DCPLB_DATA7()              bfin_read32(DCPLB_DATA7)
+#define bfin_write_DCPLB_DATA7(val)          bfin_write32(DCPLB_DATA7,val)
+#define bfin_read_DCPLB_DATA8()              bfin_read32(DCPLB_DATA8)
+#define bfin_write_DCPLB_DATA8(val)          bfin_write32(DCPLB_DATA8,val)
+#define bfin_read_DCPLB_DATA9()              bfin_read32(DCPLB_DATA9)
+#define bfin_write_DCPLB_DATA9(val)          bfin_write32(DCPLB_DATA9,val)
+#define bfin_read_DCPLB_DATA10()             bfin_read32(DCPLB_DATA10)
+#define bfin_write_DCPLB_DATA10(val)         bfin_write32(DCPLB_DATA10,val)
+#define bfin_read_DCPLB_DATA11()             bfin_read32(DCPLB_DATA11)
+#define bfin_write_DCPLB_DATA11(val)         bfin_write32(DCPLB_DATA11,val)
+#define bfin_read_DCPLB_DATA12()             bfin_read32(DCPLB_DATA12)
+#define bfin_write_DCPLB_DATA12(val)         bfin_write32(DCPLB_DATA12,val)
+#define bfin_read_DCPLB_DATA13()             bfin_read32(DCPLB_DATA13)
+#define bfin_write_DCPLB_DATA13(val)         bfin_write32(DCPLB_DATA13,val)
+#define bfin_read_DCPLB_DATA14()             bfin_read32(DCPLB_DATA14)
+#define bfin_write_DCPLB_DATA14(val)         bfin_write32(DCPLB_DATA14,val)
+#define bfin_read_DCPLB_DATA15()             bfin_read32(DCPLB_DATA15)
+#define bfin_write_DCPLB_DATA15(val)         bfin_write32(DCPLB_DATA15,val)
+#define bfin_read_DTEST_COMMAND()            bfin_read32(DTEST_COMMAND)
+#define bfin_write_DTEST_COMMAND(val)        bfin_write32(DTEST_COMMAND,val)
+/*
+#define DTEST_INDEX            0xFFE00304
+*/
+#define bfin_read_DTEST_DATA0()              bfin_read32(DTEST_DATA0)
+#define bfin_write_DTEST_DATA0(val)          bfin_write32(DTEST_DATA0,val)
+#define bfin_read_DTEST_DATA1()              bfin_read32(DTEST_DATA1)
+#define bfin_write_DTEST_DATA1(val)          bfin_write32(DTEST_DATA1,val)
+/*
+#define DTEST_DATA2            0xFFE00408
+#define DTEST_DATA3            0xFFE0040C
+*/
+#define bfin_read_IMEM_CONTROL()             bfin_read32(IMEM_CONTROL)
+#define bfin_write_IMEM_CONTROL(val)         bfin_write32(IMEM_CONTROL,val)
+#define bfin_read_ICPLB_STATUS()             bfin_read32(ICPLB_STATUS)
+#define bfin_write_ICPLB_STATUS(val)         bfin_write32(ICPLB_STATUS,val)
+#define bfin_read_ICPLB_FAULT_ADDR()         bfin_read32(ICPLB_FAULT_ADDR)
+#define bfin_write_ICPLB_FAULT_ADDR(val)     bfin_write32(ICPLB_FAULT_ADDR,val)
+#define bfin_read_ICPLB_ADDR0()              bfin_read32(ICPLB_ADDR0)
+#define bfin_write_ICPLB_ADDR0(val)          bfin_write32(ICPLB_ADDR0,val)
+#define bfin_read_ICPLB_ADDR1()              bfin_read32(ICPLB_ADDR1)
+#define bfin_write_ICPLB_ADDR1(val)          bfin_write32(ICPLB_ADDR1,val)
+#define bfin_read_ICPLB_ADDR2()              bfin_read32(ICPLB_ADDR2)
+#define bfin_write_ICPLB_ADDR2(val)          bfin_write32(ICPLB_ADDR2,val)
+#define bfin_read_ICPLB_ADDR3()              bfin_read32(ICPLB_ADDR3)
+#define bfin_write_ICPLB_ADDR3(val)          bfin_write32(ICPLB_ADDR3,val)
+#define bfin_read_ICPLB_ADDR4()              bfin_read32(ICPLB_ADDR4)
+#define bfin_write_ICPLB_ADDR4(val)          bfin_write32(ICPLB_ADDR4,val)
+#define bfin_read_ICPLB_ADDR5()              bfin_read32(ICPLB_ADDR5)
+#define bfin_write_ICPLB_ADDR5(val)          bfin_write32(ICPLB_ADDR5,val)
+#define bfin_read_ICPLB_ADDR6()              bfin_read32(ICPLB_ADDR6)
+#define bfin_write_ICPLB_ADDR6(val)          bfin_write32(ICPLB_ADDR6,val)
+#define bfin_read_ICPLB_ADDR7()              bfin_read32(ICPLB_ADDR7)
+#define bfin_write_ICPLB_ADDR7(val)          bfin_write32(ICPLB_ADDR7,val)
+#define bfin_read_ICPLB_ADDR8()              bfin_read32(ICPLB_ADDR8)
+#define bfin_write_ICPLB_ADDR8(val)          bfin_write32(ICPLB_ADDR8,val)
+#define bfin_read_ICPLB_ADDR9()              bfin_read32(ICPLB_ADDR9)
+#define bfin_write_ICPLB_ADDR9(val)          bfin_write32(ICPLB_ADDR9,val)
+#define bfin_read_ICPLB_ADDR10()             bfin_read32(ICPLB_ADDR10)
+#define bfin_write_ICPLB_ADDR10(val)         bfin_write32(ICPLB_ADDR10,val)
+#define bfin_read_ICPLB_ADDR11()             bfin_read32(ICPLB_ADDR11)
+#define bfin_write_ICPLB_ADDR11(val)         bfin_write32(ICPLB_ADDR11,val)
+#define bfin_read_ICPLB_ADDR12()             bfin_read32(ICPLB_ADDR12)
+#define bfin_write_ICPLB_ADDR12(val)         bfin_write32(ICPLB_ADDR12,val)
+#define bfin_read_ICPLB_ADDR13()             bfin_read32(ICPLB_ADDR13)
+#define bfin_write_ICPLB_ADDR13(val)         bfin_write32(ICPLB_ADDR13,val)
+#define bfin_read_ICPLB_ADDR14()             bfin_read32(ICPLB_ADDR14)
+#define bfin_write_ICPLB_ADDR14(val)         bfin_write32(ICPLB_ADDR14,val)
+#define bfin_read_ICPLB_ADDR15()             bfin_read32(ICPLB_ADDR15)
+#define bfin_write_ICPLB_ADDR15(val)         bfin_write32(ICPLB_ADDR15,val)
+#define bfin_read_ICPLB_DATA0()              bfin_read32(ICPLB_DATA0)
+#define bfin_write_ICPLB_DATA0(val)          bfin_write32(ICPLB_DATA0,val)
+#define bfin_read_ICPLB_DATA1()              bfin_read32(ICPLB_DATA1)
+#define bfin_write_ICPLB_DATA1(val)          bfin_write32(ICPLB_DATA1,val)
+#define bfin_read_ICPLB_DATA2()              bfin_read32(ICPLB_DATA2)
+#define bfin_write_ICPLB_DATA2(val)          bfin_write32(ICPLB_DATA2,val)
+#define bfin_read_ICPLB_DATA3()              bfin_read32(ICPLB_DATA3)
+#define bfin_write_ICPLB_DATA3(val)          bfin_write32(ICPLB_DATA3,val)
+#define bfin_read_ICPLB_DATA4()              bfin_read32(ICPLB_DATA4)
+#define bfin_write_ICPLB_DATA4(val)          bfin_write32(ICPLB_DATA4,val)
+#define bfin_read_ICPLB_DATA5()              bfin_read32(ICPLB_DATA5)
+#define bfin_write_ICPLB_DATA5(val)          bfin_write32(ICPLB_DATA5,val)
+#define bfin_read_ICPLB_DATA6()              bfin_read32(ICPLB_DATA6)
+#define bfin_write_ICPLB_DATA6(val)          bfin_write32(ICPLB_DATA6,val)
+#define bfin_read_ICPLB_DATA7()              bfin_read32(ICPLB_DATA7)
+#define bfin_write_ICPLB_DATA7(val)          bfin_write32(ICPLB_DATA7,val)
+#define bfin_read_ICPLB_DATA8()              bfin_read32(ICPLB_DATA8)
+#define bfin_write_ICPLB_DATA8(val)          bfin_write32(ICPLB_DATA8,val)
+#define bfin_read_ICPLB_DATA9()              bfin_read32(ICPLB_DATA9)
+#define bfin_write_ICPLB_DATA9(val)          bfin_write32(ICPLB_DATA9,val)
+#define bfin_read_ICPLB_DATA10()             bfin_read32(ICPLB_DATA10)
+#define bfin_write_ICPLB_DATA10(val)         bfin_write32(ICPLB_DATA10,val)
+#define bfin_read_ICPLB_DATA11()             bfin_read32(ICPLB_DATA11)
+#define bfin_write_ICPLB_DATA11(val)         bfin_write32(ICPLB_DATA11,val)
+#define bfin_read_ICPLB_DATA12()             bfin_read32(ICPLB_DATA12)
+#define bfin_write_ICPLB_DATA12(val)         bfin_write32(ICPLB_DATA12,val)
+#define bfin_read_ICPLB_DATA13()             bfin_read32(ICPLB_DATA13)
+#define bfin_write_ICPLB_DATA13(val)         bfin_write32(ICPLB_DATA13,val)
+#define bfin_read_ICPLB_DATA14()             bfin_read32(ICPLB_DATA14)
+#define bfin_write_ICPLB_DATA14(val)         bfin_write32(ICPLB_DATA14,val)
+#define bfin_read_ICPLB_DATA15()             bfin_read32(ICPLB_DATA15)
+#define bfin_write_ICPLB_DATA15(val)         bfin_write32(ICPLB_DATA15,val)
+#define bfin_write_ITEST_COMMAND(val)        bfin_write32(ITEST_COMMAND,val)
+#if 0
+#define ITEST_INDEX            0xFFE01304   /* Instruction Test Index Register */
+#endif
+#define bfin_write_ITEST_DATA0(val)          bfin_write32(ITEST_DATA0,val)
+#define bfin_write_ITEST_DATA1(val)          bfin_write32(ITEST_DATA1,val)
+
+#if !ANOMALY_05000481
+#define bfin_read_ITEST_COMMAND()            bfin_read32(ITEST_COMMAND)
+#define bfin_read_ITEST_DATA0()              bfin_read32(ITEST_DATA0)
+#define bfin_read_ITEST_DATA1()              bfin_read32(ITEST_DATA1)
+#endif
+
+/* Event/Interrupt Registers*/
+
+#define bfin_read_EVT0()                     bfin_read32(EVT0)
+#define bfin_write_EVT0(val)                 bfin_write32(EVT0,val)
+#define bfin_read_EVT1()                     bfin_read32(EVT1)
+#define bfin_write_EVT1(val)                 bfin_write32(EVT1,val)
+#define bfin_read_EVT2()                     bfin_read32(EVT2)
+#define bfin_write_EVT2(val)                 bfin_write32(EVT2,val)
+#define bfin_read_EVT3()                     bfin_read32(EVT3)
+#define bfin_write_EVT3(val)                 bfin_write32(EVT3,val)
+#define bfin_read_EVT4()                     bfin_read32(EVT4)
+#define bfin_write_EVT4(val)                 bfin_write32(EVT4,val)
+#define bfin_read_EVT5()                     bfin_read32(EVT5)
+#define bfin_write_EVT5(val)                 bfin_write32(EVT5,val)
+#define bfin_read_EVT6()                     bfin_read32(EVT6)
+#define bfin_write_EVT6(val)                 bfin_write32(EVT6,val)
+#define bfin_read_EVT7()                     bfin_read32(EVT7)
+#define bfin_write_EVT7(val)                 bfin_write32(EVT7,val)
+#define bfin_read_EVT8()                     bfin_read32(EVT8)
+#define bfin_write_EVT8(val)                 bfin_write32(EVT8,val)
+#define bfin_read_EVT9()                     bfin_read32(EVT9)
+#define bfin_write_EVT9(val)                 bfin_write32(EVT9,val)
+#define bfin_read_EVT10()                    bfin_read32(EVT10)
+#define bfin_write_EVT10(val)                bfin_write32(EVT10,val)
+#define bfin_read_EVT11()                    bfin_read32(EVT11)
+#define bfin_write_EVT11(val)                bfin_write32(EVT11,val)
+#define bfin_read_EVT12()                    bfin_read32(EVT12)
+#define bfin_write_EVT12(val)                bfin_write32(EVT12,val)
+#define bfin_read_EVT13()                    bfin_read32(EVT13)
+#define bfin_write_EVT13(val)                bfin_write32(EVT13,val)
+#define bfin_read_EVT14()                    bfin_read32(EVT14)
+#define bfin_write_EVT14(val)                bfin_write32(EVT14,val)
+#define bfin_read_EVT15()                    bfin_read32(EVT15)
+#define bfin_write_EVT15(val)                bfin_write32(EVT15,val)
+#define bfin_read_EVT_OVERRIDE()             bfin_read32(EVT_OVERRIDE)
+#define bfin_write_EVT_OVERRIDE(val)         bfin_write32(EVT_OVERRIDE,val)
+#define bfin_read_IMASK()                    bfin_read32(IMASK)
+#define bfin_write_IMASK(val)                bfin_write32(IMASK,val)
+#define bfin_read_IPEND()                    bfin_read32(IPEND)
+#define bfin_write_IPEND(val)                bfin_write32(IPEND,val)
+#define bfin_read_ILAT()                     bfin_read32(ILAT)
+#define bfin_write_ILAT(val)                 bfin_write32(ILAT,val)
+#define bfin_read_IPRIO()                    bfin_read32(IPRIO)
+#define bfin_write_IPRIO(val)                bfin_write32(IPRIO,val)
+
+/*Core Timer Registers*/
+#define bfin_read_TCNTL()                    bfin_read32(TCNTL)
+#define bfin_write_TCNTL(val)                bfin_write32(TCNTL,val)
+#define bfin_read_TPERIOD()                  bfin_read32(TPERIOD)
+#define bfin_write_TPERIOD(val)              bfin_write32(TPERIOD,val)
+#define bfin_read_TSCALE()                   bfin_read32(TSCALE)
+#define bfin_write_TSCALE(val)               bfin_write32(TSCALE,val)
+#define bfin_read_TCOUNT()                   bfin_read32(TCOUNT)
+#define bfin_write_TCOUNT(val)               bfin_write32(TCOUNT,val)
+
+/*Debug/MP/Emulation Registers*/
+#define bfin_read_DSPID()                    bfin_read32(DSPID)
+#define bfin_write_DSPID(val)                bfin_write32(DSPID,val)
+#define bfin_read_DBGCTL()                   bfin_read32(DBGCTL)
+#define bfin_write_DBGCTL(val)               bfin_write32(DBGCTL,val)
+#define bfin_read_DBGSTAT()                  bfin_read32(DBGSTAT)
+#define bfin_write_DBGSTAT(val)              bfin_write32(DBGSTAT,val)
+#define bfin_read_EMUDAT()                   bfin_read32(EMUDAT)
+#define bfin_write_EMUDAT(val)               bfin_write32(EMUDAT,val)
+
+/*Trace Buffer Registers*/
+#define bfin_read_TBUFCTL()                  bfin_read32(TBUFCTL)
+#define bfin_write_TBUFCTL(val)              bfin_write32(TBUFCTL,val)
+#define bfin_read_TBUFSTAT()                 bfin_read32(TBUFSTAT)
+#define bfin_write_TBUFSTAT(val)             bfin_write32(TBUFSTAT,val)
+#define bfin_read_TBUF()                     bfin_read32(TBUF)
+#define bfin_write_TBUF(val)                 bfin_write32(TBUF,val)
+
+/*Watch Point Control Registers*/
+#define bfin_read_WPIACTL()                  bfin_read32(WPIACTL)
+#define bfin_write_WPIACTL(val)              bfin_write32(WPIACTL,val)
+#define bfin_read_WPIA0()                    bfin_read32(WPIA0)
+#define bfin_write_WPIA0(val)                bfin_write32(WPIA0,val)
+#define bfin_read_WPIA1()                    bfin_read32(WPIA1)
+#define bfin_write_WPIA1(val)                bfin_write32(WPIA1,val)
+#define bfin_read_WPIA2()                    bfin_read32(WPIA2)
+#define bfin_write_WPIA2(val)                bfin_write32(WPIA2,val)
+#define bfin_read_WPIA3()                    bfin_read32(WPIA3)
+#define bfin_write_WPIA3(val)                bfin_write32(WPIA3,val)
+#define bfin_read_WPIA4()                    bfin_read32(WPIA4)
+#define bfin_write_WPIA4(val)                bfin_write32(WPIA4,val)
+#define bfin_read_WPIA5()                    bfin_read32(WPIA5)
+#define bfin_write_WPIA5(val)                bfin_write32(WPIA5,val)
+#define bfin_read_WPIACNT0()                 bfin_read32(WPIACNT0)
+#define bfin_write_WPIACNT0(val)             bfin_write32(WPIACNT0,val)
+#define bfin_read_WPIACNT1()                 bfin_read32(WPIACNT1)
+#define bfin_write_WPIACNT1(val)             bfin_write32(WPIACNT1,val)
+#define bfin_read_WPIACNT2()                 bfin_read32(WPIACNT2)
+#define bfin_write_WPIACNT2(val)             bfin_write32(WPIACNT2,val)
+#define bfin_read_WPIACNT3()                 bfin_read32(WPIACNT3)
+#define bfin_write_WPIACNT3(val)             bfin_write32(WPIACNT3,val)
+#define bfin_read_WPIACNT4()                 bfin_read32(WPIACNT4)
+#define bfin_write_WPIACNT4(val)             bfin_write32(WPIACNT4,val)
+#define bfin_read_WPIACNT5()                 bfin_read32(WPIACNT5)
+#define bfin_write_WPIACNT5(val)             bfin_write32(WPIACNT5,val)
+#define bfin_read_WPDACTL()                  bfin_read32(WPDACTL)
+#define bfin_write_WPDACTL(val)              bfin_write32(WPDACTL,val)
+#define bfin_read_WPDA0()                    bfin_read32(WPDA0)
+#define bfin_write_WPDA0(val)                bfin_write32(WPDA0,val)
+#define bfin_read_WPDA1()                    bfin_read32(WPDA1)
+#define bfin_write_WPDA1(val)                bfin_write32(WPDA1,val)
+#define bfin_read_WPDACNT0()                 bfin_read32(WPDACNT0)
+#define bfin_write_WPDACNT0(val)             bfin_write32(WPDACNT0,val)
+#define bfin_read_WPDACNT1()                 bfin_read32(WPDACNT1)
+#define bfin_write_WPDACNT1(val)             bfin_write32(WPDACNT1,val)
+#define bfin_read_WPSTAT()                   bfin_read32(WPSTAT)
+#define bfin_write_WPSTAT(val)               bfin_write32(WPSTAT,val)
+
+/*Performance Monitor Registers*/
+#define bfin_read_PFCTL()                    bfin_read32(PFCTL)
+#define bfin_write_PFCTL(val)                bfin_write32(PFCTL,val)
+#define bfin_read_PFCNTR0()                  bfin_read32(PFCNTR0)
+#define bfin_write_PFCNTR0(val)              bfin_write32(PFCNTR0,val)
+#define bfin_read_PFCNTR1()                  bfin_read32(PFCNTR1)
+#define bfin_write_PFCNTR1(val)              bfin_write32(PFCNTR1,val)
+
+#endif				/* _CDEF_LPBLACKFIN_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/checksum.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/checksum.h
new file mode 100644
index 0000000..e7134bf
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/checksum.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                     akbar.hussain@lineo.com
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BFIN_CHECKSUM_H
+#define _BFIN_CHECKSUM_H
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline __wsum
+__csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+		     __u8 proto, __wsum sum)
+{
+	unsigned int carry;
+
+	__asm__ ("%0 = %0 + %2;\n\t"
+		"CC = AC0;\n\t"
+		"%1 = CC;\n\t"
+		"%0 = %0 + %1;\n\t"
+		"%0 = %0 + %3;\n\t"
+		"CC = AC0;\n\t"
+		"%1 = CC;\n\t"
+		"%0 = %0 + %1;\n\t"
+		"%0 = %0 + %4;\n\t"
+		"CC = AC0;\n\t"
+		"%1 = CC;\n\t"
+		"%0 = %0 + %1;\n\t"
+		: "=d" (sum), "=&d" (carry)
+		: "d" (daddr), "d" (saddr), "d" ((len + proto) << 8), "0"(sum)
+		: "CC");
+
+	return (sum);
+}
+#define csum_tcpudp_nofold __csum_tcpudp_nofold
+
+#include <asm-generic/checksum.h>
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/clkdev.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/clkdev.h
new file mode 100644
index 0000000..ded0209
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/clkdev.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_CLKDEV__H_
+#define __ASM_CLKDEV__H_
+
+#include <linux/slab.h>
+
+static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
+{
+	return kzalloc(size, GFP_KERNEL);
+}
+
+#ifndef CONFIG_COMMON_CLK
+#define __clk_put(clk)
+#define __clk_get(clk) ({ 1; })
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/clocks.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/clocks.h
new file mode 100644
index 0000000..9b3c85b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/clocks.h
@@ -0,0 +1,74 @@
+/*
+ * Common Clock definitions for various kernel files
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BFIN_CLOCKS_H
+#define _BFIN_CLOCKS_H
+
+#include <asm/dpmc.h>
+
+#ifdef CONFIG_CCLK_DIV_1
+# define CONFIG_CCLK_ACT_DIV   CCLK_DIV1
+# define CONFIG_CCLK_DIV 1
+#endif
+
+#ifdef CONFIG_CCLK_DIV_2
+# define CONFIG_CCLK_ACT_DIV   CCLK_DIV2
+# define CONFIG_CCLK_DIV 2
+#endif
+
+#ifdef CONFIG_CCLK_DIV_4
+# define CONFIG_CCLK_ACT_DIV   CCLK_DIV4
+# define CONFIG_CCLK_DIV 4
+#endif
+
+#ifdef CONFIG_CCLK_DIV_8
+# define CONFIG_CCLK_ACT_DIV   CCLK_DIV8
+# define CONFIG_CCLK_DIV 8
+#endif
+
+#ifndef CONFIG_PLL_BYPASS
+# ifndef CONFIG_CLKIN_HALF
+#  define CONFIG_VCO_HZ   (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)
+# else
+#  define CONFIG_VCO_HZ   ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2)
+# endif
+
+# define CONFIG_CCLK_HZ  (CONFIG_VCO_HZ/CONFIG_CCLK_DIV)
+# define CONFIG_SCLK_HZ  (CONFIG_VCO_HZ/CONFIG_SCLK_DIV)
+
+#else
+# define CONFIG_VCO_HZ   (CONFIG_CLKIN_HZ)
+# define CONFIG_CCLK_HZ  (CONFIG_CLKIN_HZ)
+# define CONFIG_SCLK_HZ  (CONFIG_CLKIN_HZ)
+# define CONFIG_VCO_MULT 0
+#endif
+
+#include <linux/clk.h>
+
+struct clk_ops {
+	unsigned long (*get_rate)(struct clk *clk);
+	unsigned long (*round_rate)(struct clk *clk, unsigned long rate);
+	int (*set_rate)(struct clk *clk, unsigned long rate);
+	int (*enable)(struct clk *clk);
+	int (*disable)(struct clk *clk);
+};
+
+struct clk {
+	struct clk		*parent;
+	const char              *name;
+	unsigned long           rate;
+	spinlock_t              lock;
+	u32                     flags;
+	const struct clk_ops    *ops;
+	void __iomem            *reg;
+	u32                     mask;
+	u32                     shift;
+};
+
+int clk_init(void);
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/cmpxchg.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/cmpxchg.h
new file mode 100644
index 0000000..2539288
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/cmpxchg.h
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2004-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ARCH_BLACKFIN_CMPXCHG__
+#define __ARCH_BLACKFIN_CMPXCHG__
+
+#ifdef CONFIG_SMP
+
+#include <linux/linkage.h>
+
+asmlinkage unsigned long __raw_xchg_1_asm(volatile void *ptr, unsigned long value);
+asmlinkage unsigned long __raw_xchg_2_asm(volatile void *ptr, unsigned long value);
+asmlinkage unsigned long __raw_xchg_4_asm(volatile void *ptr, unsigned long value);
+asmlinkage unsigned long __raw_cmpxchg_1_asm(volatile void *ptr,
+					unsigned long new, unsigned long old);
+asmlinkage unsigned long __raw_cmpxchg_2_asm(volatile void *ptr,
+					unsigned long new, unsigned long old);
+asmlinkage unsigned long __raw_cmpxchg_4_asm(volatile void *ptr,
+					unsigned long new, unsigned long old);
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+				   int size)
+{
+	unsigned long tmp;
+
+	switch (size) {
+	case 1:
+		tmp = __raw_xchg_1_asm(ptr, x);
+		break;
+	case 2:
+		tmp = __raw_xchg_2_asm(ptr, x);
+		break;
+	case 4:
+		tmp = __raw_xchg_4_asm(ptr, x);
+		break;
+	}
+
+	return tmp;
+}
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+				      unsigned long new, int size)
+{
+	unsigned long tmp;
+
+	switch (size) {
+	case 1:
+		tmp = __raw_cmpxchg_1_asm(ptr, new, old);
+		break;
+	case 2:
+		tmp = __raw_cmpxchg_2_asm(ptr, new, old);
+		break;
+	case 4:
+		tmp = __raw_cmpxchg_4_asm(ptr, new, old);
+		break;
+	}
+
+	return tmp;
+}
+#define cmpxchg(ptr, o, n) \
+	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
+		(unsigned long)(n), sizeof(*(ptr))))
+
+#else /* !CONFIG_SMP */
+
+#include <mach/blackfin.h>
+#include <asm/irqflags.h>
+
+struct __xchg_dummy {
+	unsigned long a[100];
+};
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+				   int size)
+{
+	unsigned long tmp = 0;
+	unsigned long flags;
+
+	flags = hard_local_irq_save();
+
+	switch (size) {
+	case 1:
+		__asm__ __volatile__
+			("%0 = b%2 (z);\n\t"
+			 "b%2 = %1;\n\t"
+			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	case 2:
+		__asm__ __volatile__
+			("%0 = w%2 (z);\n\t"
+			 "w%2 = %1;\n\t"
+			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	case 4:
+		__asm__ __volatile__
+			("%0 = %2;\n\t"
+			 "%2 = %1;\n\t"
+			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	}
+	hard_local_irq_restore(flags);
+	return tmp;
+}
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#define cmpxchg(ptr, o, n)	cmpxchg_local((ptr), (o), (n))
+#define cmpxchg64(ptr, o, n)	cmpxchg64_local((ptr), (o), (n))
+
+#endif /* !CONFIG_SMP */
+
+#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+
+#endif /* __ARCH_BLACKFIN_CMPXCHG__ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/context.S b/src/kernel/linux/v4.14/arch/blackfin/include/asm/context.S
new file mode 100644
index 0000000..507e7aa
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/context.S
@@ -0,0 +1,407 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/*
+ * NOTE!  The single-stepping code assumes that all interrupt handlers
+ * start by saving SYSCFG on the stack with their first instruction.
+ */
+
+/*
+ * Code to save processor context.
+ *  We even save the register which are preserved by a function call
+ *	 - r4, r5, r6, r7, p3, p4, p5
+ */
+.macro save_context_with_interrupts
+	[--sp] = SYSCFG;
+
+	[--sp] = P0;	/*orig_p0*/
+	[--sp] = R0;	/*orig_r0*/
+
+	[--sp] = ( R7:0, P5:0 );
+	[--sp] = fp;
+	[--sp] = usp;
+
+	[--sp] = i0;
+	[--sp] = i1;
+	[--sp] = i2;
+	[--sp] = i3;
+
+	[--sp] = m0;
+	[--sp] = m1;
+	[--sp] = m2;
+	[--sp] = m3;
+
+	[--sp] = l0;
+	[--sp] = l1;
+	[--sp] = l2;
+	[--sp] = l3;
+
+	[--sp] = b0;
+	[--sp] = b1;
+	[--sp] = b2;
+	[--sp] = b3;
+	[--sp] = a0.x;
+	[--sp] = a0.w;
+	[--sp] = a1.x;
+	[--sp] = a1.w;
+
+	[--sp] = LC0;
+	[--sp] = LC1;
+	[--sp] = LT0;
+	[--sp] = LT1;
+	[--sp] = LB0;
+	[--sp] = LB1;
+
+	[--sp] = ASTAT;
+
+	[--sp] = r0;	/* Skip reserved */
+	[--sp] = RETS;
+	r0 = RETI;
+	[--sp] = r0;
+	[--sp] = RETX;
+	[--sp] = RETN;
+	[--sp] = RETE;
+	[--sp] = SEQSTAT;
+	[--sp] = r0;	/* Skip IPEND as well. */
+	/* Switch to other method of keeping interrupts disabled.  */
+#ifdef CONFIG_DEBUG_HWERR
+	r0 = 0x3f;
+	sti r0;
+#else
+	cli r0;
+#endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+	sp += -12;
+	call _trace_hardirqs_off;
+	sp += 12;
+#endif
+	[--sp] = RETI;  /*orig_pc*/
+	/* Clear all L registers.  */
+	r0 = 0 (x);
+	l0 = r0;
+	l1 = r0;
+	l2 = r0;
+	l3 = r0;
+.endm
+
+.macro save_context_syscall
+	[--sp] = SYSCFG;
+
+	[--sp] = P0;	/*orig_p0*/
+	[--sp] = R0;	/*orig_r0*/
+	[--sp] = ( R7:0, P5:0 );
+	[--sp] = fp;
+	[--sp] = usp;
+
+	[--sp] = i0;
+	[--sp] = i1;
+	[--sp] = i2;
+	[--sp] = i3;
+
+	[--sp] = m0;
+	[--sp] = m1;
+	[--sp] = m2;
+	[--sp] = m3;
+
+	[--sp] = l0;
+	[--sp] = l1;
+	[--sp] = l2;
+	[--sp] = l3;
+
+	[--sp] = b0;
+	[--sp] = b1;
+	[--sp] = b2;
+	[--sp] = b3;
+	[--sp] = a0.x;
+	[--sp] = a0.w;
+	[--sp] = a1.x;
+	[--sp] = a1.w;
+
+	[--sp] = LC0;
+	[--sp] = LC1;
+	[--sp] = LT0;
+	[--sp] = LT1;
+	[--sp] = LB0;
+	[--sp] = LB1;
+
+	[--sp] = ASTAT;
+
+	[--sp] = r0;	/* Skip reserved */
+	[--sp] = RETS;
+	r0 = RETI;
+	[--sp] = r0;
+	[--sp] = RETX;
+	[--sp] = RETN;
+	[--sp] = RETE;
+	[--sp] = SEQSTAT;
+	[--sp] = r0;	/* Skip IPEND as well. */
+	[--sp] = RETI;  /*orig_pc*/
+	/* Clear all L registers.  */
+	r0 = 0 (x);
+	l0 = r0;
+	l1 = r0;
+	l2 = r0;
+	l3 = r0;
+.endm
+
+.macro save_context_no_interrupts
+	[--sp] = SYSCFG;
+	[--sp] = P0;	/* orig_p0 */
+	[--sp] = R0;	/* orig_r0 */
+	[--sp] = ( R7:0, P5:0 );
+	[--sp] = fp;
+	[--sp] = usp;
+
+	[--sp] = i0;
+	[--sp] = i1;
+	[--sp] = i2;
+	[--sp] = i3;
+
+	[--sp] = m0;
+	[--sp] = m1;
+	[--sp] = m2;
+	[--sp] = m3;
+
+	[--sp] = l0;
+	[--sp] = l1;
+	[--sp] = l2;
+	[--sp] = l3;
+
+	[--sp] = b0;
+	[--sp] = b1;
+	[--sp] = b2;
+	[--sp] = b3;
+	[--sp] = a0.x;
+	[--sp] = a0.w;
+	[--sp] = a1.x;
+	[--sp] = a1.w;
+
+	[--sp] = LC0;
+	[--sp] = LC1;
+	[--sp] = LT0;
+	[--sp] = LT1;
+	[--sp] = LB0;
+	[--sp] = LB1;
+
+	[--sp] = ASTAT;
+
+#ifdef CONFIG_KGDB
+	fp     = 0(Z);
+	r1     = sp;
+	r1    += 60;
+	r1    += 60;
+	r1    += 60;
+	[--sp] = r1;
+#else
+	[--sp] = r0;	/* Skip reserved */
+#endif
+	[--sp] = RETS;
+	r0 = RETI;
+	[--sp] = r0;
+	[--sp] = RETX;
+	[--sp] = RETN;
+	[--sp] = RETE;
+	[--sp] = SEQSTAT;
+#ifdef CONFIG_DEBUG_KERNEL
+	p1.l = lo(IPEND);
+	p1.h = hi(IPEND);
+	r1 = [p1];
+	[--sp] = r1;
+#else
+	[--sp] = r0;	/* Skip IPEND as well. */
+#endif
+	[--sp] = r0;  /*orig_pc*/
+	/* Clear all L registers.  */
+	r0 = 0 (x);
+	l0 = r0;
+	l1 = r0;
+	l2 = r0;
+	l3 = r0;
+.endm
+
+.macro restore_context_no_interrupts
+	sp += 4;	/* Skip orig_pc */
+	sp += 4;	/* Skip IPEND */
+	SEQSTAT = [sp++];
+	RETE = [sp++];
+	RETN = [sp++];
+	RETX = [sp++];
+	r0 = [sp++];
+	RETI = r0;	/* Restore RETI indirectly when in exception */
+	RETS = [sp++];
+
+	sp += 4;	/* Skip Reserved */
+
+	ASTAT = [sp++];
+
+	LB1 = [sp++];
+	LB0 = [sp++];
+	LT1 = [sp++];
+	LT0 = [sp++];
+	LC1 = [sp++];
+	LC0 = [sp++];
+
+	a1.w = [sp++];
+	a1.x = [sp++];
+	a0.w = [sp++];
+	a0.x = [sp++];
+	b3 = [sp++];
+	b2 = [sp++];
+	b1 = [sp++];
+	b0 = [sp++];
+
+	l3 = [sp++];
+	l2 = [sp++];
+	l1 = [sp++];
+	l0 = [sp++];
+
+	m3 = [sp++];
+	m2 = [sp++];
+	m1 = [sp++];
+	m0 = [sp++];
+
+	i3 = [sp++];
+	i2 = [sp++];
+	i1 = [sp++];
+	i0 = [sp++];
+
+	sp += 4;
+	fp = [sp++];
+
+	( R7 : 0, P5 : 0) = [ SP ++ ];
+	sp += 8;	/* Skip orig_r0/orig_p0 */
+	SYSCFG = [sp++];
+.endm
+
+.macro restore_context_with_interrupts
+	sp += 4;	/* Skip orig_pc */
+	sp += 4;	/* Skip IPEND */
+	SEQSTAT = [sp++];
+	RETE = [sp++];
+	RETN = [sp++];
+	RETX = [sp++];
+	RETI = [sp++];
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+	sp += -12;
+	call _trace_hardirqs_on;
+	sp += 12;
+#endif
+
+	RETS = [sp++];
+
+#ifdef CONFIG_SMP
+	GET_PDA(p0, r0);
+	r0 = [p0 + PDA_IRQFLAGS];
+#else
+	p0.h = _bfin_irq_flags;
+	p0.l = _bfin_irq_flags;
+	r0 = [p0];
+#endif
+	sti r0;
+
+	sp += 4;	/* Skip Reserved */
+
+	ASTAT = [sp++];
+
+	LB1 = [sp++];
+	LB0 = [sp++];
+	LT1 = [sp++];
+	LT0 = [sp++];
+	LC1 = [sp++];
+	LC0 = [sp++];
+
+	a1.w = [sp++];
+	a1.x = [sp++];
+	a0.w = [sp++];
+	a0.x = [sp++];
+	b3 = [sp++];
+	b2 = [sp++];
+	b1 = [sp++];
+	b0 = [sp++];
+
+	l3 = [sp++];
+	l2 = [sp++];
+	l1 = [sp++];
+	l0 = [sp++];
+
+	m3 = [sp++];
+	m2 = [sp++];
+	m1 = [sp++];
+	m0 = [sp++];
+
+	i3 = [sp++];
+	i2 = [sp++];
+	i1 = [sp++];
+	i0 = [sp++];
+
+	sp += 4;
+	fp = [sp++];
+
+	( R7 : 0, P5 : 0) = [ SP ++ ];
+	sp += 8;	/* Skip orig_r0/orig_p0 */
+	csync;
+	SYSCFG = [sp++];
+	csync;
+.endm
+
+.macro save_context_cplb
+	[--sp] = (R7:0, P5:0);
+	[--sp] = fp;
+
+	[--sp] = a0.x;
+	[--sp] = a0.w;
+	[--sp] = a1.x;
+	[--sp] = a1.w;
+
+	[--sp] = LC0;
+	[--sp] = LC1;
+	[--sp] = LT0;
+	[--sp] = LT1;
+	[--sp] = LB0;
+	[--sp] = LB1;
+
+	[--sp] = RETS;
+.endm
+
+.macro restore_context_cplb
+	RETS = [sp++];
+
+	LB1 = [sp++];
+	LB0 = [sp++];
+	LT1 = [sp++];
+	LT0 = [sp++];
+	LC1 = [sp++];
+	LC0 = [sp++];
+
+	a1.w = [sp++];
+	a1.x = [sp++];
+	a0.w = [sp++];
+	a0.x = [sp++];
+
+	fp = [sp++];
+
+	(R7:0, P5:0) = [SP++];
+.endm
+
+.macro pseudo_long_call func:req, scratch:req
+#ifdef CONFIG_ROMKERNEL
+	\scratch\().l = \func;
+	\scratch\().h = \func;
+	call (\scratch);
+#else
+	call \func;
+#endif
+.endm
+
+#if defined(CONFIG_BFIN_SCRATCH_REG_RETN)
+# define EX_SCRATCH_REG RETN
+#elif defined(CONFIG_BFIN_SCRATCH_REG_RETE)
+# define EX_SCRATCH_REG RETE
+#else
+# define EX_SCRATCH_REG CYCLES
+#endif
+
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/cplb.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/cplb.h
new file mode 100644
index 0000000..5c37f62
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/cplb.h
@@ -0,0 +1,153 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _CPLB_H
+#define _CPLB_H
+
+#include <mach/anomaly.h>
+
+#define SDRAM_IGENERIC    (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
+#define SDRAM_IKERNEL     (SDRAM_IGENERIC | CPLB_LOCK)
+#define L1_IMEMORY        (               CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
+#define SDRAM_INON_CHBL   (               CPLB_USER_RD | CPLB_VALID)
+
+#if ANOMALY_05000158
+#define ANOMALY_05000158_WORKAROUND             0x200
+#else
+#define ANOMALY_05000158_WORKAROUND             0x0
+#endif
+
+#define CPLB_COMMON	(CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
+
+#ifdef CONFIG_BFIN_EXTMEM_WRITEBACK
+#define SDRAM_DGENERIC   (CPLB_L1_CHBL | CPLB_COMMON)
+#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH)
+#define SDRAM_DGENERIC   (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW  | CPLB_COMMON)
+#else
+#define SDRAM_DGENERIC   (CPLB_COMMON)
+#endif
+
+#define SDRAM_DNON_CHBL  (CPLB_COMMON)
+#define SDRAM_EBIU       (CPLB_COMMON)
+#define SDRAM_OOPS       (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
+
+#define L1_DMEMORY       (CPLB_LOCK | CPLB_COMMON)
+
+#ifdef CONFIG_SMP
+#define L2_ATTR          (INITIAL_T | I_CPLB | D_CPLB)
+#define L2_IMEMORY       (CPLB_COMMON | PAGE_SIZE_1MB)
+#define L2_DMEMORY       (CPLB_LOCK | CPLB_COMMON | PAGE_SIZE_1MB)
+
+#else
+#define L2_ATTR          (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB)
+# if defined(CONFIG_BFIN_L2_ICACHEABLE)
+# define L2_IMEMORY      (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | PAGE_SIZE_1MB)
+# else
+# define L2_IMEMORY      (               CPLB_USER_RD | CPLB_VALID | PAGE_SIZE_1MB)
+# endif
+
+# if defined(CONFIG_BFIN_L2_WRITEBACK)
+# define L2_DMEMORY      (CPLB_L1_CHBL | CPLB_COMMON | PAGE_SIZE_1MB)
+# elif defined(CONFIG_BFIN_L2_WRITETHROUGH)
+# define L2_DMEMORY      (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON | PAGE_SIZE_1MB)
+# else
+# define L2_DMEMORY      (CPLB_COMMON | PAGE_SIZE_1MB)
+# endif
+#endif /* CONFIG_SMP */
+
+#define SIZE_1K 0x00000400      /* 1K */
+#define SIZE_4K 0x00001000      /* 4K */
+#define SIZE_1M 0x00100000      /* 1M */
+#define SIZE_4M 0x00400000      /* 4M */
+#define SIZE_16K 0x00004000      /* 16K */
+#define SIZE_64K 0x00010000      /* 64K */
+#define SIZE_16M 0x01000000      /* 16M */
+#define SIZE_64M 0x04000000      /* 64M */
+
+#define MAX_CPLBS 16
+
+#define CPLB_ENABLE_ICACHE_P	0
+#define CPLB_ENABLE_DCACHE_P	1
+#define CPLB_ENABLE_DCACHE2_P	2
+#define CPLB_ENABLE_CPLBS_P	3	/* Deprecated! */
+#define CPLB_ENABLE_ICPLBS_P	4
+#define CPLB_ENABLE_DCPLBS_P	5
+
+#define CPLB_ENABLE_ICACHE	(1<<CPLB_ENABLE_ICACHE_P)
+#define CPLB_ENABLE_DCACHE	(1<<CPLB_ENABLE_DCACHE_P)
+#define CPLB_ENABLE_DCACHE2	(1<<CPLB_ENABLE_DCACHE2_P)
+#define CPLB_ENABLE_CPLBS	(1<<CPLB_ENABLE_CPLBS_P)
+#define CPLB_ENABLE_ICPLBS	(1<<CPLB_ENABLE_ICPLBS_P)
+#define CPLB_ENABLE_DCPLBS	(1<<CPLB_ENABLE_DCPLBS_P)
+#define CPLB_ENABLE_ANY_CPLBS	CPLB_ENABLE_CPLBS | \
+				CPLB_ENABLE_ICPLBS | \
+				CPLB_ENABLE_DCPLBS
+
+#define CPLB_RELOADED		0x0000
+#define CPLB_NO_UNLOCKED	0x0001
+#define CPLB_NO_ADDR_MATCH	0x0002
+#define CPLB_PROT_VIOL		0x0003
+#define CPLB_UNKNOWN_ERR	0x0004
+
+#define CPLB_DEF_CACHE		CPLB_L1_CHBL | CPLB_WT
+#define CPLB_CACHE_ENABLED	CPLB_L1_CHBL | CPLB_DIRTY
+
+#define CPLB_I_PAGE_MGMT	CPLB_LOCK | CPLB_VALID
+#define CPLB_D_PAGE_MGMT	CPLB_LOCK | CPLB_ALL_ACCESS | CPLB_VALID
+#define CPLB_DNOCACHE		CPLB_ALL_ACCESS | CPLB_VALID
+#define CPLB_DDOCACHE		CPLB_DNOCACHE | CPLB_DEF_CACHE
+#define CPLB_INOCACHE   	CPLB_USER_RD | CPLB_VALID
+#define CPLB_IDOCACHE   	CPLB_INOCACHE | CPLB_L1_CHBL
+
+#define FAULT_RW        (1 << 16)
+#define FAULT_USERSUPV  (1 << 17)
+#define FAULT_CPLBBITS  0x0000ffff
+
+#ifndef __ASSEMBLY__
+
+static inline void _disable_cplb(u32 mmr, u32 mask)
+{
+	u32 ctrl = bfin_read32(mmr) & ~mask;
+	/* CSYNC to ensure load store ordering */
+	__builtin_bfin_csync();
+	bfin_write32(mmr, ctrl);
+	__builtin_bfin_ssync();
+}
+static inline void disable_cplb(u32 mmr, u32 mask)
+{
+	u32 ctrl = bfin_read32(mmr) & ~mask;
+	CSYNC();
+	bfin_write32(mmr, ctrl);
+	SSYNC();
+}
+#define _disable_dcplb() _disable_cplb(DMEM_CONTROL, ENDCPLB)
+#define  disable_dcplb()  disable_cplb(DMEM_CONTROL, ENDCPLB)
+#define _disable_icplb() _disable_cplb(IMEM_CONTROL, ENICPLB)
+#define  disable_icplb()  disable_cplb(IMEM_CONTROL, ENICPLB)
+
+static inline void _enable_cplb(u32 mmr, u32 mask)
+{
+	u32 ctrl = bfin_read32(mmr) | mask;
+	/* CSYNC to ensure load store ordering */
+	__builtin_bfin_csync();
+	bfin_write32(mmr, ctrl);
+	__builtin_bfin_ssync();
+}
+static inline void enable_cplb(u32 mmr, u32 mask)
+{
+	u32 ctrl = bfin_read32(mmr) | mask;
+	CSYNC();
+	bfin_write32(mmr, ctrl);
+	SSYNC();
+}
+#define _enable_dcplb()  _enable_cplb(DMEM_CONTROL, ENDCPLB)
+#define  enable_dcplb()   enable_cplb(DMEM_CONTROL, ENDCPLB)
+#define _enable_icplb()  _enable_cplb(IMEM_CONTROL, ENICPLB)
+#define  enable_icplb()   enable_cplb(IMEM_CONTROL, ENICPLB)
+
+#endif		/* __ASSEMBLY__ */
+
+#endif		/* _CPLB_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/cplbinit.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/cplbinit.h
new file mode 100644
index 0000000..f315c83
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/cplbinit.h
@@ -0,0 +1,66 @@
+/*
+ * Common CPLB definitions for CPLB init
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_CPLBINIT_H__
+#define __ASM_CPLBINIT_H__
+
+#include <asm/blackfin.h>
+#include <asm/cplb.h>
+#include <linux/threads.h>
+
+#ifdef CONFIG_CPLB_SWITCH_TAB_L1
+# define PDT_ATTR __attribute__((l1_data))
+#else
+# define PDT_ATTR
+#endif
+
+struct cplb_entry {
+	unsigned long data, addr;
+};
+
+struct cplb_boundary {
+	unsigned long eaddr; /* End of this region.  */
+	unsigned long data; /* CPLB data value.  */
+};
+
+extern struct cplb_boundary dcplb_bounds[];
+extern struct cplb_boundary icplb_bounds[];
+extern int dcplb_nr_bounds, icplb_nr_bounds;
+
+extern struct cplb_entry dcplb_tbl[NR_CPUS][MAX_CPLBS];
+extern struct cplb_entry icplb_tbl[NR_CPUS][MAX_CPLBS];
+extern int first_switched_icplb;
+extern int first_switched_dcplb;
+
+extern int nr_dcplb_miss[], nr_icplb_miss[], nr_icplb_supv_miss[];
+extern int nr_dcplb_prot[], nr_cplb_flush[];
+
+#ifdef CONFIG_MPU
+
+extern int first_mask_dcplb;
+
+extern int page_mask_order;
+extern int page_mask_nelts;
+
+extern unsigned long *current_rwx_mask[NR_CPUS];
+
+extern void flush_switched_cplbs(unsigned int);
+extern void set_mask_dcplbs(unsigned long *, unsigned int);
+
+extern void __noreturn panic_cplb_error(int seqstat, struct pt_regs *);
+
+#endif /* CONFIG_MPU */
+
+extern void bfin_icache_init(struct cplb_entry *icplb_tbl);
+extern void bfin_dcache_init(struct cplb_entry *icplb_tbl);
+
+#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
+extern void generate_cplb_tables_all(void);
+extern void generate_cplb_tables_cpu(unsigned int cpu);
+#endif
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/cpu.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/cpu.h
new file mode 100644
index 0000000..e349631
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/cpu.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *                         Philippe Gerum <rpm@xenomai.org>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BLACKFIN_CPU_H
+#define __ASM_BLACKFIN_CPU_H
+
+#include <linux/percpu.h>
+
+struct blackfin_cpudata {
+	struct cpu cpu;
+	unsigned int imemctl;
+	unsigned int dmemctl;
+#ifdef CONFIG_SMP
+	struct task_struct *idle;
+#endif
+};
+
+DECLARE_PER_CPU(struct blackfin_cpudata, cpu_data);
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/def_LPBlackfin.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/def_LPBlackfin.h
new file mode 100644
index 0000000..c5c8d8a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/def_LPBlackfin.h
@@ -0,0 +1,697 @@
+/*
+ * Blackfin core register bit & address definitions
+ *
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or GPL-2 (or later).
+ */
+
+#ifndef _DEF_LPBLACKFIN_H
+#define _DEF_LPBLACKFIN_H
+
+#include <mach/anomaly.h>
+
+#define MK_BMSK_(x) (1<<x)
+#define BFIN_DEPOSIT(mask, x)	(((x) << __ffs(mask)) & (mask))
+#define BFIN_EXTRACT(mask, x)	(((x) & (mask)) >> __ffs(mask))
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+#if ANOMALY_05000198
+# define NOP_PAD_ANOMALY_05000198 "nop;"
+#else
+# define NOP_PAD_ANOMALY_05000198
+#endif
+
+#define _bfin_readX(addr, size, asm_size, asm_ext) ({ \
+	u32 __v; \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000198 \
+		"%0 = " #asm_size "[%1]" #asm_ext ";" \
+		: "=d" (__v) \
+		: "a" (addr) \
+	); \
+	__v; })
+#define _bfin_writeX(addr, val, size, asm_size) \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000198 \
+		#asm_size "[%0] = %1;" \
+		: \
+		: "a" (addr), "d" ((u##size)(val)) \
+		: "memory" \
+	)
+
+#define bfin_read8(addr)  _bfin_readX(addr,  8, b, (z))
+#define bfin_read16(addr) _bfin_readX(addr, 16, w, (z))
+#define bfin_read32(addr) _bfin_readX(addr, 32,  ,    )
+#define bfin_write8(addr, val)  _bfin_writeX(addr, val,  8, b)
+#define bfin_write16(addr, val) _bfin_writeX(addr, val, 16, w)
+#define bfin_write32(addr, val) _bfin_writeX(addr, val, 32,  )
+
+#define bfin_read(addr) \
+({ \
+	sizeof(*(addr)) == 1 ? bfin_read8(addr)  : \
+	sizeof(*(addr)) == 2 ? bfin_read16(addr) : \
+	sizeof(*(addr)) == 4 ? bfin_read32(addr) : \
+	({ BUG(); 0; }); \
+})
+#define bfin_write(addr, val) \
+do { \
+	switch (sizeof(*(addr))) { \
+	case 1: bfin_write8(addr, val);  break; \
+	case 2: bfin_write16(addr, val); break; \
+	case 4: bfin_write32(addr, val); break; \
+	default: BUG(); \
+	} \
+} while (0)
+
+#define bfin_write_or(addr, bits) \
+do { \
+	typeof(addr) __addr = (addr); \
+	bfin_write(__addr, bfin_read(__addr) | (bits)); \
+} while (0)
+
+#define bfin_write_and(addr, bits) \
+do { \
+	typeof(addr) __addr = (addr); \
+	bfin_write(__addr, bfin_read(__addr) & (bits)); \
+} while (0)
+
+#endif /* __ASSEMBLY__ */
+
+/**************************************************
+ * System Register Bits
+ **************************************************/
+
+/**************************************************
+ * ASTAT register
+ **************************************************/
+
+/* definitions of ASTAT bit positions*/
+
+/*Result of last ALU0 or shifter operation is zero*/
+#define ASTAT_AZ_P         0x00000000
+/*Result of last ALU0 or shifter operation is negative*/
+#define ASTAT_AN_P         0x00000001
+/*Condition Code, used for holding comparison results*/
+#define ASTAT_CC_P         0x00000005
+/*Quotient Bit*/
+#define ASTAT_AQ_P         0x00000006
+/*Rounding mode, set for biased, clear for unbiased*/
+#define ASTAT_RND_MOD_P    0x00000008
+/*Result of last ALU0 operation generated a carry*/
+#define ASTAT_AC0_P        0x0000000C
+/*Result of last ALU0 operation generated a carry*/
+#define ASTAT_AC0_COPY_P   0x00000002
+/*Result of last ALU1 operation generated a carry*/
+#define ASTAT_AC1_P        0x0000000D
+/*Result of last ALU0 or MAC0 operation overflowed, sticky for MAC*/
+#define ASTAT_AV0_P        0x00000010
+/*Sticky version of ASTAT_AV0 */
+#define ASTAT_AV0S_P       0x00000011
+/*Result of last MAC1 operation overflowed, sticky for MAC*/
+#define ASTAT_AV1_P        0x00000012
+/*Sticky version of ASTAT_AV1 */
+#define ASTAT_AV1S_P       0x00000013
+/*Result of last ALU0 or MAC0 operation overflowed*/
+#define ASTAT_V_P          0x00000018
+/*Result of last ALU0 or MAC0 operation overflowed*/
+#define ASTAT_V_COPY_P     0x00000003
+/*Sticky version of ASTAT_V*/
+#define ASTAT_VS_P         0x00000019
+
+/* Masks */
+
+/*Result of last ALU0 or shifter operation is zero*/
+#define ASTAT_AZ           MK_BMSK_(ASTAT_AZ_P)
+/*Result of last ALU0 or shifter operation is negative*/
+#define ASTAT_AN           MK_BMSK_(ASTAT_AN_P)
+/*Result of last ALU0 operation generated a carry*/
+#define ASTAT_AC0          MK_BMSK_(ASTAT_AC0_P)
+/*Result of last ALU0 operation generated a carry*/
+#define ASTAT_AC0_COPY     MK_BMSK_(ASTAT_AC0_COPY_P)
+/*Result of last ALU0 operation generated a carry*/
+#define ASTAT_AC1          MK_BMSK_(ASTAT_AC1_P)
+/*Result of last ALU0 or MAC0 operation overflowed, sticky for MAC*/
+#define ASTAT_AV0          MK_BMSK_(ASTAT_AV0_P)
+/*Result of last MAC1 operation overflowed, sticky for MAC*/
+#define ASTAT_AV1          MK_BMSK_(ASTAT_AV1_P)
+/*Condition Code, used for holding comparison results*/
+#define ASTAT_CC           MK_BMSK_(ASTAT_CC_P)
+/*Quotient Bit*/
+#define ASTAT_AQ           MK_BMSK_(ASTAT_AQ_P)
+/*Rounding mode, set for biased, clear for unbiased*/
+#define ASTAT_RND_MOD      MK_BMSK_(ASTAT_RND_MOD_P)
+/*Overflow Bit*/
+#define ASTAT_V            MK_BMSK_(ASTAT_V_P)
+/*Overflow Bit*/
+#define ASTAT_V_COPY       MK_BMSK_(ASTAT_V_COPY_P)
+
+/**************************************************
+ *   SEQSTAT register
+ **************************************************/
+
+/* Bit Positions  */
+#define SEQSTAT_EXCAUSE0_P      0x00000000	/* Last exception cause bit 0 */
+#define SEQSTAT_EXCAUSE1_P      0x00000001	/* Last exception cause bit 1 */
+#define SEQSTAT_EXCAUSE2_P      0x00000002	/* Last exception cause bit 2 */
+#define SEQSTAT_EXCAUSE3_P      0x00000003	/* Last exception cause bit 3 */
+#define SEQSTAT_EXCAUSE4_P      0x00000004	/* Last exception cause bit 4 */
+#define SEQSTAT_EXCAUSE5_P      0x00000005	/* Last exception cause bit 5 */
+#define SEQSTAT_IDLE_REQ_P      0x0000000C	/* Pending idle mode request,
+						 * set by IDLE instruction.
+						 */
+#define SEQSTAT_SFTRESET_P      0x0000000D	/* Indicates whether the last
+						 * reset was a software reset
+						 * (=1)
+						 */
+#define SEQSTAT_HWERRCAUSE0_P   0x0000000E	/* Last hw error cause bit 0 */
+#define SEQSTAT_HWERRCAUSE1_P   0x0000000F	/* Last hw error cause bit 1 */
+#define SEQSTAT_HWERRCAUSE2_P   0x00000010	/* Last hw error cause bit 2 */
+#define SEQSTAT_HWERRCAUSE3_P   0x00000011	/* Last hw error cause bit 3 */
+#define SEQSTAT_HWERRCAUSE4_P   0x00000012	/* Last hw error cause bit 4 */
+/* Masks */
+/* Exception cause */
+#define SEQSTAT_EXCAUSE        (MK_BMSK_(SEQSTAT_EXCAUSE0_P) | \
+                                MK_BMSK_(SEQSTAT_EXCAUSE1_P) | \
+                                MK_BMSK_(SEQSTAT_EXCAUSE2_P) | \
+                                MK_BMSK_(SEQSTAT_EXCAUSE3_P) | \
+                                MK_BMSK_(SEQSTAT_EXCAUSE4_P) | \
+                                MK_BMSK_(SEQSTAT_EXCAUSE5_P) | \
+                                0)
+
+/* Indicates whether the last reset was a software reset (=1) */
+#define SEQSTAT_SFTRESET       (MK_BMSK_(SEQSTAT_SFTRESET_P))
+
+/* Last hw error cause */
+#define SEQSTAT_HWERRCAUSE     (MK_BMSK_(SEQSTAT_HWERRCAUSE0_P) | \
+                                MK_BMSK_(SEQSTAT_HWERRCAUSE1_P) | \
+                                MK_BMSK_(SEQSTAT_HWERRCAUSE2_P) | \
+                                MK_BMSK_(SEQSTAT_HWERRCAUSE3_P) | \
+                                MK_BMSK_(SEQSTAT_HWERRCAUSE4_P) | \
+                                0)
+
+/* Translate bits to something useful */
+
+/* Last hw error cause */
+#define SEQSTAT_HWERRCAUSE_SHIFT         (14)
+#define SEQSTAT_HWERRCAUSE_SYSTEM_MMR    (0x02 << SEQSTAT_HWERRCAUSE_SHIFT)
+#define SEQSTAT_HWERRCAUSE_EXTERN_ADDR   (0x03 << SEQSTAT_HWERRCAUSE_SHIFT)
+#define SEQSTAT_HWERRCAUSE_PERF_FLOW     (0x12 << SEQSTAT_HWERRCAUSE_SHIFT)
+#define SEQSTAT_HWERRCAUSE_RAISE_5       (0x18 << SEQSTAT_HWERRCAUSE_SHIFT)
+
+/**************************************************
+ *   SYSCFG register
+ **************************************************/
+
+/* Bit Positions */
+#define SYSCFG_SSSTEP_P     0x00000000	/* Supervisor single step, when
+					 * set it forces an exception
+					 * for each instruction executed
+					 */
+#define SYSCFG_CCEN_P       0x00000001	/* Enable cycle counter (=1) */
+#define SYSCFG_SNEN_P       0x00000002	/* Self nesting Interrupt Enable */
+
+/* Masks */
+
+/* Supervisor single step, when set it forces an exception for each
+ *instruction executed
+ */
+#define SYSCFG_SSSTEP         MK_BMSK_(SYSCFG_SSSTEP_P )
+/* Enable cycle counter (=1) */
+#define SYSCFG_CCEN           MK_BMSK_(SYSCFG_CCEN_P )
+/* Self Nesting Interrupt Enable */
+#define SYSCFG_SNEN	       MK_BMSK_(SYSCFG_SNEN_P)
+/* Backward-compatibility for typos in prior releases */
+#define SYSCFG_SSSSTEP         SYSCFG_SSSTEP
+#define SYSCFG_CCCEN           SYSCFG_CCEN
+
+/****************************************************
+ * Core MMR Register Map
+ ****************************************************/
+
+/* Data Cache & SRAM Memory  (0xFFE00000 - 0xFFE00404) */
+
+#define SRAM_BASE_ADDRESS  0xFFE00000	/* SRAM Base Address Register */
+#define DMEM_CONTROL       0xFFE00004	/* Data memory control */
+#define DCPLB_STATUS       0xFFE00008	/* Data Cache Programmable Look-Aside
+					 * Buffer Status
+					 */
+#define DCPLB_FAULT_STATUS 0xFFE00008	/* "" (older define) */
+#define DCPLB_FAULT_ADDR   0xFFE0000C	/* Data Cache Programmable Look-Aside
+					 * Buffer Fault Address
+					 */
+#define DCPLB_ADDR0        0xFFE00100	/* Data Cache Protection Lookaside
+					 * Buffer 0
+					 */
+#define DCPLB_ADDR1        0xFFE00104	/* Data Cache Protection Lookaside
+					 * Buffer 1
+					 */
+#define DCPLB_ADDR2        0xFFE00108	/* Data Cache Protection Lookaside
+					 * Buffer 2
+					 */
+#define DCPLB_ADDR3        0xFFE0010C	/* Data Cacheability Protection
+					 * Lookaside Buffer 3
+					 */
+#define DCPLB_ADDR4        0xFFE00110	/* Data Cacheability Protection
+					 * Lookaside Buffer 4
+					 */
+#define DCPLB_ADDR5        0xFFE00114	/* Data Cacheability Protection
+					 * Lookaside Buffer 5
+					 */
+#define DCPLB_ADDR6        0xFFE00118	/* Data Cacheability Protection
+					 * Lookaside Buffer 6
+					 */
+#define DCPLB_ADDR7        0xFFE0011C	/* Data Cacheability Protection
+					 * Lookaside Buffer 7
+					 */
+#define DCPLB_ADDR8        0xFFE00120	/* Data Cacheability Protection
+					 * Lookaside Buffer 8
+					 */
+#define DCPLB_ADDR9        0xFFE00124	/* Data Cacheability Protection
+					 * Lookaside Buffer 9
+					 */
+#define DCPLB_ADDR10       0xFFE00128	/* Data Cacheability Protection
+					 * Lookaside Buffer 10
+					 */
+#define DCPLB_ADDR11       0xFFE0012C	/* Data Cacheability Protection
+					 * Lookaside Buffer 11
+					 */
+#define DCPLB_ADDR12       0xFFE00130	/* Data Cacheability Protection
+					 * Lookaside Buffer 12
+					 */
+#define DCPLB_ADDR13       0xFFE00134	/* Data Cacheability Protection
+					 * Lookaside Buffer 13
+					 */
+#define DCPLB_ADDR14       0xFFE00138	/* Data Cacheability Protection
+					 * Lookaside Buffer 14
+					 */
+#define DCPLB_ADDR15       0xFFE0013C	/* Data Cacheability Protection
+					 * Lookaside Buffer 15
+					 */
+#define DCPLB_DATA0        0xFFE00200	/* Data Cache 0 Status */
+#define DCPLB_DATA1        0xFFE00204	/* Data Cache 1 Status */
+#define DCPLB_DATA2        0xFFE00208	/* Data Cache 2 Status */
+#define DCPLB_DATA3        0xFFE0020C	/* Data Cache 3 Status */
+#define DCPLB_DATA4        0xFFE00210	/* Data Cache 4 Status */
+#define DCPLB_DATA5        0xFFE00214	/* Data Cache 5 Status */
+#define DCPLB_DATA6        0xFFE00218	/* Data Cache 6 Status */
+#define DCPLB_DATA7        0xFFE0021C	/* Data Cache 7 Status */
+#define DCPLB_DATA8        0xFFE00220	/* Data Cache 8 Status */
+#define DCPLB_DATA9        0xFFE00224	/* Data Cache 9 Status */
+#define DCPLB_DATA10       0xFFE00228	/* Data Cache 10 Status */
+#define DCPLB_DATA11       0xFFE0022C	/* Data Cache 11 Status */
+#define DCPLB_DATA12       0xFFE00230	/* Data Cache 12 Status */
+#define DCPLB_DATA13       0xFFE00234	/* Data Cache 13 Status */
+#define DCPLB_DATA14       0xFFE00238	/* Data Cache 14 Status */
+#define DCPLB_DATA15       0xFFE0023C	/* Data Cache 15 Status */
+#define DCPLB_DATA16       0xFFE00240	/* Extra Dummy entry */
+
+#define DTEST_COMMAND      0xFFE00300	/* Data Test Command Register */
+#define DTEST_DATA0        0xFFE00400	/* Data Test Data Register */
+#define DTEST_DATA1        0xFFE00404	/* Data Test Data Register */
+
+/* Instruction Cache & SRAM Memory  (0xFFE01004 - 0xFFE01404) */
+
+#define IMEM_CONTROL       0xFFE01004	/* Instruction Memory Control */
+#define ICPLB_STATUS       0xFFE01008	/* Instruction Cache miss status */
+#define CODE_FAULT_STATUS  0xFFE01008	/* "" (older define) */
+#define ICPLB_FAULT_ADDR   0xFFE0100C	/* Instruction Cache miss address */
+#define CODE_FAULT_ADDR    0xFFE0100C	/* "" (older define) */
+#define ICPLB_ADDR0        0xFFE01100	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 0
+					 */
+#define ICPLB_ADDR1        0xFFE01104	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 1
+					 */
+#define ICPLB_ADDR2        0xFFE01108	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 2
+					 */
+#define ICPLB_ADDR3        0xFFE0110C	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 3
+					 */
+#define ICPLB_ADDR4        0xFFE01110	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 4
+					 */
+#define ICPLB_ADDR5        0xFFE01114	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 5
+					 */
+#define ICPLB_ADDR6        0xFFE01118	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 6
+					 */
+#define ICPLB_ADDR7        0xFFE0111C	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 7
+					 */
+#define ICPLB_ADDR8        0xFFE01120	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 8
+					 */
+#define ICPLB_ADDR9        0xFFE01124	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 9
+					 */
+#define ICPLB_ADDR10       0xFFE01128	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 10
+					 */
+#define ICPLB_ADDR11       0xFFE0112C	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 11
+					 */
+#define ICPLB_ADDR12       0xFFE01130	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 12
+					 */
+#define ICPLB_ADDR13       0xFFE01134	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 13
+					 */
+#define ICPLB_ADDR14       0xFFE01138	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 14
+					 */
+#define ICPLB_ADDR15       0xFFE0113C	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 15
+					 */
+#define ICPLB_DATA0        0xFFE01200	/* Instruction Cache 0 Status */
+#define ICPLB_DATA1        0xFFE01204	/* Instruction Cache 1 Status */
+#define ICPLB_DATA2        0xFFE01208	/* Instruction Cache 2 Status */
+#define ICPLB_DATA3        0xFFE0120C	/* Instruction Cache 3 Status */
+#define ICPLB_DATA4        0xFFE01210	/* Instruction Cache 4 Status */
+#define ICPLB_DATA5        0xFFE01214	/* Instruction Cache 5 Status */
+#define ICPLB_DATA6        0xFFE01218	/* Instruction Cache 6 Status */
+#define ICPLB_DATA7        0xFFE0121C	/* Instruction Cache 7 Status */
+#define ICPLB_DATA8        0xFFE01220	/* Instruction Cache 8 Status */
+#define ICPLB_DATA9        0xFFE01224	/* Instruction Cache 9 Status */
+#define ICPLB_DATA10       0xFFE01228	/* Instruction Cache 10 Status */
+#define ICPLB_DATA11       0xFFE0122C	/* Instruction Cache 11 Status */
+#define ICPLB_DATA12       0xFFE01230	/* Instruction Cache 12 Status */
+#define ICPLB_DATA13       0xFFE01234	/* Instruction Cache 13 Status */
+#define ICPLB_DATA14       0xFFE01238	/* Instruction Cache 14 Status */
+#define ICPLB_DATA15       0xFFE0123C	/* Instruction Cache 15 Status */
+#define ITEST_COMMAND      0xFFE01300	/* Instruction Test Command Register */
+#define ITEST_DATA0        0xFFE01400	/* Instruction Test Data Register */
+#define ITEST_DATA1        0xFFE01404	/* Instruction Test Data Register */
+
+/* Event/Interrupt Controller Registers   (0xFFE02000 - 0xFFE02110) */
+
+#define EVT0               0xFFE02000	/* Event Vector 0 ESR Address */
+#define EVT1               0xFFE02004	/* Event Vector 1 ESR Address */
+#define EVT2               0xFFE02008	/* Event Vector 2 ESR Address */
+#define EVT3               0xFFE0200C	/* Event Vector 3 ESR Address */
+#define EVT4               0xFFE02010	/* Event Vector 4 ESR Address */
+#define EVT5               0xFFE02014	/* Event Vector 5 ESR Address */
+#define EVT6               0xFFE02018	/* Event Vector 6 ESR Address */
+#define EVT7               0xFFE0201C	/* Event Vector 7 ESR Address */
+#define EVT8               0xFFE02020	/* Event Vector 8 ESR Address */
+#define EVT9               0xFFE02024	/* Event Vector 9 ESR Address */
+#define EVT10              0xFFE02028	/* Event Vector 10 ESR Address */
+#define EVT11              0xFFE0202C	/* Event Vector 11 ESR Address */
+#define EVT12              0xFFE02030	/* Event Vector 12 ESR Address */
+#define EVT13              0xFFE02034	/* Event Vector 13 ESR Address */
+#define EVT14              0xFFE02038	/* Event Vector 14 ESR Address */
+#define EVT15              0xFFE0203C	/* Event Vector 15 ESR Address */
+#define EVT_OVERRIDE       0xFFE02100	/* Event Vector Override Register */
+#define IMASK              0xFFE02104	/* Interrupt Mask Register */
+#define IPEND              0xFFE02108	/* Interrupt Pending Register */
+#define ILAT               0xFFE0210C	/* Interrupt Latch Register */
+#define IPRIO              0xFFE02110	/* Core Interrupt Priority Register */
+
+/* Core Timer Registers     (0xFFE03000 - 0xFFE0300C) */
+
+#define TCNTL              0xFFE03000	/* Core Timer Control Register */
+#define TPERIOD            0xFFE03004	/* Core Timer Period Register */
+#define TSCALE             0xFFE03008	/* Core Timer Scale Register */
+#define TCOUNT             0xFFE0300C	/* Core Timer Count Register */
+
+/* Debug/MP/Emulation Registers     (0xFFE05000 - 0xFFE05008) */
+#define DSPID              0xFFE05000	/* DSP Processor ID Register for
+					 * MP implementations
+					 */
+
+#define DBGSTAT            0xFFE05008	/* Debug Status Register */
+
+/* Trace Buffer Registers     (0xFFE06000 - 0xFFE06100) */
+
+#define TBUFCTL            0xFFE06000	/* Trace Buffer Control Register */
+#define TBUFSTAT           0xFFE06004	/* Trace Buffer Status Register */
+#define TBUF               0xFFE06100	/* Trace Buffer */
+
+/* Watchpoint Control Registers (0xFFE07000 - 0xFFE07200) */
+
+/* Watchpoint Instruction Address Control Register */
+#define WPIACTL            0xFFE07000
+/* Watchpoint Instruction Address Register 0 */
+#define WPIA0              0xFFE07040
+/* Watchpoint Instruction Address Register 1 */
+#define WPIA1              0xFFE07044
+/* Watchpoint Instruction Address Register 2 */
+#define WPIA2              0xFFE07048
+/* Watchpoint Instruction Address Register 3 */
+#define WPIA3              0xFFE0704C
+/* Watchpoint Instruction Address Register 4 */
+#define WPIA4              0xFFE07050
+/* Watchpoint Instruction Address Register 5 */
+#define WPIA5              0xFFE07054
+/* Watchpoint Instruction Address Count Register 0 */
+#define WPIACNT0           0xFFE07080
+/* Watchpoint Instruction Address Count Register 1 */
+#define WPIACNT1           0xFFE07084
+/* Watchpoint Instruction Address Count Register 2 */
+#define WPIACNT2           0xFFE07088
+/* Watchpoint Instruction Address Count Register 3 */
+#define WPIACNT3           0xFFE0708C
+/* Watchpoint Instruction Address Count Register 4 */
+#define WPIACNT4           0xFFE07090
+/* Watchpoint Instruction Address Count Register 5 */
+#define WPIACNT5           0xFFE07094
+/* Watchpoint Data Address Control Register */
+#define WPDACTL            0xFFE07100
+/* Watchpoint Data Address Register 0 */
+#define WPDA0              0xFFE07140
+/* Watchpoint Data Address Register 1 */
+#define WPDA1              0xFFE07144
+/* Watchpoint Data Address Count Value Register 0 */
+#define WPDACNT0           0xFFE07180
+/* Watchpoint Data Address Count Value Register 1 */
+#define WPDACNT1           0xFFE07184
+/* Watchpoint Status Register */
+#define WPSTAT             0xFFE07200
+
+/* Performance Monitor Registers    (0xFFE08000 - 0xFFE08104) */
+
+/* Performance Monitor Control Register */
+#define PFCTL              0xFFE08000
+/* Performance Monitor Counter Register 0 */
+#define PFCNTR0            0xFFE08100
+/* Performance Monitor Counter Register 1 */
+#define PFCNTR1            0xFFE08104
+
+/****************************************************
+ * Core MMR Register Bits
+ ****************************************************/
+
+/**************************************************
+ * EVT registers (ILAT, IMASK, and IPEND).
+ **************************************************/
+
+/* Bit Positions */
+#define EVT_EMU_P        0x00000000	/* Emulator interrupt bit position */
+#define EVT_RST_P        0x00000001	/* Reset interrupt bit position */
+#define EVT_NMI_P        0x00000002	/* Non Maskable interrupt bit position */
+#define EVT_EVX_P        0x00000003	/* Exception bit position */
+#define EVT_IRPTEN_P     0x00000004	/* Global interrupt enable bit position */
+#define EVT_IVHW_P       0x00000005	/* Hardware Error interrupt bit position */
+#define EVT_IVTMR_P      0x00000006	/* Timer interrupt bit position */
+#define EVT_IVG7_P       0x00000007	/* IVG7 interrupt bit position */
+#define EVT_IVG8_P       0x00000008	/* IVG8 interrupt bit position */
+#define EVT_IVG9_P       0x00000009	/* IVG9 interrupt bit position */
+#define EVT_IVG10_P      0x0000000a	/* IVG10 interrupt bit position */
+#define EVT_IVG11_P      0x0000000b	/* IVG11 interrupt bit position */
+#define EVT_IVG12_P      0x0000000c	/* IVG12 interrupt bit position */
+#define EVT_IVG13_P      0x0000000d	/* IVG13 interrupt bit position */
+#define EVT_IVG14_P      0x0000000e	/* IVG14 interrupt bit position */
+#define EVT_IVG15_P      0x0000000f	/* IVG15 interrupt bit position */
+
+/* Masks */
+#define EVT_EMU       MK_BMSK_(EVT_EMU_P   )	/* Emulator interrupt mask */
+#define EVT_RST       MK_BMSK_(EVT_RST_P   )	/* Reset interrupt mask */
+#define EVT_NMI       MK_BMSK_(EVT_NMI_P   )	/* Non Maskable interrupt mask */
+#define EVT_EVX       MK_BMSK_(EVT_EVX_P   )	/* Exception mask */
+#define EVT_IRPTEN    MK_BMSK_(EVT_IRPTEN_P)	/* Global interrupt enable mask */
+#define EVT_IVHW      MK_BMSK_(EVT_IVHW_P  )	/* Hardware Error interrupt mask */
+#define EVT_IVTMR     MK_BMSK_(EVT_IVTMR_P )	/* Timer interrupt mask */
+#define EVT_IVG7      MK_BMSK_(EVT_IVG7_P  )	/* IVG7 interrupt mask */
+#define EVT_IVG8      MK_BMSK_(EVT_IVG8_P  )	/* IVG8 interrupt mask */
+#define EVT_IVG9      MK_BMSK_(EVT_IVG9_P  )	/* IVG9 interrupt mask */
+#define EVT_IVG10     MK_BMSK_(EVT_IVG10_P )	/* IVG10 interrupt mask */
+#define EVT_IVG11     MK_BMSK_(EVT_IVG11_P )	/* IVG11 interrupt mask */
+#define EVT_IVG12     MK_BMSK_(EVT_IVG12_P )	/* IVG12 interrupt mask */
+#define EVT_IVG13     MK_BMSK_(EVT_IVG13_P )	/* IVG13 interrupt mask */
+#define EVT_IVG14     MK_BMSK_(EVT_IVG14_P )	/* IVG14 interrupt mask */
+#define EVT_IVG15     MK_BMSK_(EVT_IVG15_P )	/* IVG15 interrupt mask */
+
+/**************************************************
+ *  DMEM_CONTROL Register
+ **************************************************/
+/* Bit Positions */
+#define ENDM_P			0x00	/* (doesn't really exist) Enable
+					 *Data Memory L1
+					 */
+#define DMCTL_ENDM_P		ENDM_P	/* "" (older define) */
+
+#define ENDCPLB_P		0x01	/* Enable DCPLBS */
+#define DMCTL_ENDCPLB_P		ENDCPLB_P	/* "" (older define) */
+#define DMC0_P			0x02	/* L1 Data Memory Configure bit 0 */
+#define DMCTL_DMC0_P		DMC0_P	/* "" (older define) */
+#define DMC1_P			0x03	/* L1 Data Memory Configure bit 1 */
+#define DMCTL_DMC1_P		DMC1_P	/* "" (older define) */
+#define DCBS_P			0x04	/* L1 Data Cache Bank Select */
+#define PORT_PREF0_P		0x12	/* DAG0 Port Preference */
+#define PORT_PREF1_P		0x13	/* DAG1 Port Preference */
+#define RDCHK			0x9	/* Enable L1 Parity Check */
+
+/* Masks */
+#define ENDM               0x00000001	/* (doesn't really exist) Enable
+					 * Data Memory L1
+					 */
+#define ENDCPLB            0x00000002	/* Enable DCPLB */
+#define ASRAM_BSRAM        0x00000000
+#define ACACHE_BSRAM       0x00000008
+#define ACACHE_BCACHE      0x0000000C
+#define DCBS               0x00000010	/*  L1 Data Cache Bank Select */
+#define PORT_PREF0	   0x00001000	/* DAG0 Port Preference */
+#define PORT_PREF1	   0x00002000	/* DAG1 Port Preference */
+
+/* IMEM_CONTROL Register */
+/* Bit Positions */
+#define ENIM_P			0x00	/* Enable L1 Code Memory  */
+#define IMCTL_ENIM_P            0x00	/* "" (older define) */
+#define ENICPLB_P		0x01	/* Enable ICPLB */
+#define IMCTL_ENICPLB_P		0x01	/* "" (older define) */
+#define IMC_P			0x02	/* Enable  */
+#define IMCTL_IMC_P		0x02	/* Configure L1 code memory as
+					 * cache (0=SRAM)
+					 */
+#define ILOC0_P			0x03	/* Lock Way 0 */
+#define ILOC1_P			0x04	/* Lock Way 1 */
+#define ILOC2_P			0x05	/* Lock Way 2 */
+#define ILOC3_P			0x06	/* Lock Way 3 */
+#define LRUPRIORST_P		0x0D	/* Least Recently Used Replacement
+					 * Priority
+					 */
+/* Masks */
+#define ENIM               0x00000001	/* Enable L1 Code Memory */
+#define ENICPLB            0x00000002	/* Enable ICPLB */
+#define IMC                0x00000004	/* Configure L1 code memory as
+					 * cache (0=SRAM)
+					 */
+#define ILOC0		   0x00000008	/* Lock Way 0 */
+#define ILOC1		   0x00000010	/* Lock Way 1 */
+#define ILOC2		   0x00000020	/* Lock Way 2 */
+#define ILOC3		   0x00000040	/* Lock Way 3 */
+#define LRUPRIORST	   0x00002000	/* Least Recently Used Replacement
+					 * Priority
+					 */
+
+/* TCNTL Masks */
+#define TMPWR              0x00000001	/* Timer Low Power Control,
+					 * 0=low power mode, 1=active state
+					 */
+#define TMREN              0x00000002	/* Timer enable, 0=disable, 1=enable */
+#define TAUTORLD           0x00000004	/* Timer auto reload */
+#define TINT               0x00000008	/* Timer generated interrupt 0=no
+					 * interrupt has been generated,
+					 * 1=interrupt has been generated
+					 * (sticky)
+					 */
+
+/* DCPLB_DATA and ICPLB_DATA Registers */
+/* Bit Positions */
+#define CPLB_VALID_P       0x00000000	/* 0=invalid entry, 1=valid entry */
+#define CPLB_LOCK_P        0x00000001	/* 0=entry may be replaced, 1=entry
+					 * locked
+					 */
+#define CPLB_USER_RD_P     0x00000002	/* 0=no read access, 1=read access
+					 * allowed (user mode)
+					 */
+/* Masks */
+#define CPLB_VALID         0x00000001	/* 0=invalid entry, 1=valid entry */
+#define CPLB_LOCK          0x00000002	/* 0=entry may be replaced, 1=entry
+					 * locked
+					 */
+#define CPLB_USER_RD       0x00000004	/* 0=no read access, 1=read access
+					 * allowed (user mode)
+					 */
+
+#define PAGE_SIZE_1KB      0x00000000	/* 1 KB page size */
+#define PAGE_SIZE_4KB      0x00010000	/* 4 KB page size */
+#define PAGE_SIZE_1MB      0x00020000	/* 1 MB page size */
+#define PAGE_SIZE_4MB      0x00030000	/* 4 MB page size */
+#ifdef CONFIG_BF60x
+#define PAGE_SIZE_16KB     0x00040000	/* 16 KB page size */
+#define PAGE_SIZE_64KB     0x00050000	/* 64 KB page size */
+#define PAGE_SIZE_16MB     0x00060000	/* 16 MB page size */
+#define PAGE_SIZE_64MB     0x00070000	/* 64 MB page size */
+#endif
+#define CPLB_L1SRAM        0x00000020	/* 0=SRAM mapped in L1, 0=SRAM not
+					 * mapped to L1
+					 */
+#define CPLB_PORTPRIO	   0x00000200	/* 0=low priority port, 1= high
+					 * priority port
+					 */
+#define CPLB_L1_CHBL       0x00001000	/* 0=non-cacheable in L1, 1=cacheable
+					 * in L1
+					 */
+/* ICPLB_DATA only */
+#define CPLB_LRUPRIO	   0x00000100	/* 0=can be replaced by any line,
+					 * 1=priority for non-replacement
+					 */
+/* DCPLB_DATA only */
+#define CPLB_USER_WR       0x00000008	/* 0=no write access, 0=write
+					 * access allowed (user mode)
+					 */
+#define CPLB_SUPV_WR       0x00000010	/* 0=no write access, 0=write
+					 * access allowed (supervisor mode)
+					 */
+#define CPLB_DIRTY         0x00000080	/* 1=dirty, 0=clean */
+#define CPLB_L1_AOW	   0x00008000	/* 0=do not allocate cache lines on
+					 * write-through writes,
+					 * 1= allocate cache lines on
+					 * write-through writes.
+					 */
+#define CPLB_WT            0x00004000	/* 0=write-back, 1=write-through */
+
+#define CPLB_ALL_ACCESS CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR
+
+/* TBUFCTL Masks */
+#define TBUFPWR            0x0001
+#define TBUFEN             0x0002
+#define TBUFOVF            0x0004
+#define TBUFCMPLP_SINGLE   0x0008
+#define TBUFCMPLP_DOUBLE   0x0010
+#define TBUFCMPLP          (TBUFCMPLP_SINGLE | TBUFCMPLP_DOUBLE)
+
+/* TBUFSTAT Masks */
+#define TBUFCNT            0x001F
+
+/* ITEST_COMMAND and DTEST_COMMAND Registers */
+/* Masks */
+#define TEST_READ	   0x00000000	/* Read Access */
+#define TEST_WRITE	   0x00000002	/* Write Access */
+#define TEST_TAG	   0x00000000	/* Access TAG */
+#define TEST_DATA	   0x00000004	/* Access DATA */
+#define TEST_DW0	   0x00000000	/* Select Double Word 0 */
+#define TEST_DW1	   0x00000008	/* Select Double Word 1 */
+#define TEST_DW2	   0x00000010	/* Select Double Word 2 */
+#define TEST_DW3	   0x00000018	/* Select Double Word 3 */
+#define TEST_MB0	   0x00000000	/* Select Mini-Bank 0 */
+#define TEST_MB1	   0x00010000	/* Select Mini-Bank 1 */
+#define TEST_MB2	   0x00020000	/* Select Mini-Bank 2 */
+#define TEST_MB3	   0x00030000	/* Select Mini-Bank 3 */
+#define TEST_SET(x)	   ((x << 5) & 0x03E0)	/* Set Index 0->31 */
+#define TEST_WAY0	   0x00000000	/* Access Way0 */
+#define TEST_WAY1	   0x04000000	/* Access Way1 */
+/* ITEST_COMMAND only */
+#define TEST_WAY2	   0x08000000	/* Access Way2 */
+#define TEST_WAY3	   0x0C000000	/* Access Way3 */
+/* DTEST_COMMAND only */
+#define TEST_BNKSELA	   0x00000000	/* Access SuperBank A */
+#define TEST_BNKSELB	   0x00800000	/* Access SuperBank B */
+
+#endif				/* _DEF_LPBLACKFIN_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/delay.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/delay.h
new file mode 100644
index 0000000..171d8de
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/delay.h
@@ -0,0 +1,51 @@
+/*
+ * delay.h - delay functions
+ *
+ * Copyright (c) 2004-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_DELAY_H__
+#define __ASM_DELAY_H__
+
+#include <mach/anomaly.h>
+
+static inline void __delay(unsigned long loops)
+{
+__asm__ __volatile__ (
+			"LSETUP(1f, 1f) LC0 = %0;"
+			"1: NOP;"
+			:
+			: "a" (loops)
+			: "LT0", "LB0", "LC0"
+		);
+}
+
+#include <linux/param.h>	/* needed for HZ */
+
+/*
+ * close approximation borrowed from m68knommu to avoid 64-bit math
+ */
+
+#define	HZSCALE		(268435456 / (1000000/HZ))
+
+static inline unsigned long __to_delay(unsigned long scale)
+{
+	extern unsigned long loops_per_jiffy;
+	return (((scale * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6;
+}
+
+static inline void udelay(unsigned long usecs)
+{
+	__delay(__to_delay(usecs));
+}
+
+static inline void ndelay(unsigned long nsecs)
+{
+	__delay(__to_delay(1) * nsecs / 1000);
+}
+
+#define ndelay ndelay
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/dma-mapping.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/dma-mapping.h
new file mode 100644
index 0000000..04254ac
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/dma-mapping.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BLACKFIN_DMA_MAPPING_H
+#define _BLACKFIN_DMA_MAPPING_H
+
+#include <asm/cacheflush.h>
+
+extern void
+__dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir);
+static inline void
+__dma_sync_inline(dma_addr_t addr, size_t size, enum dma_data_direction dir)
+{
+	switch (dir) {
+	case DMA_NONE:
+		BUG();
+	case DMA_TO_DEVICE:		/* writeback only */
+		flush_dcache_range(addr, addr + size);
+		break;
+	case DMA_FROM_DEVICE: /* invalidate only */
+	case DMA_BIDIRECTIONAL: /* flush and invalidate */
+		/* Blackfin has no dedicated invalidate (it includes a flush) */
+		invalidate_dcache_range(addr, addr + size);
+		break;
+	}
+}
+static inline void
+_dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir)
+{
+	if (__builtin_constant_p(dir))
+		__dma_sync_inline(addr, size, dir);
+	else
+		__dma_sync(addr, size, dir);
+}
+
+extern const struct dma_map_ops bfin_dma_ops;
+
+static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
+{
+	return &bfin_dma_ops;
+}
+
+#endif				/* _BLACKFIN_DMA_MAPPING_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/dma.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/dma.h
new file mode 100644
index 0000000..40e9c2b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/dma.h
@@ -0,0 +1,349 @@
+/*
+ * dma.h - Blackfin DMA defines/structures/etc...
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BLACKFIN_DMA_H_
+#define _BLACKFIN_DMA_H_
+
+#include <linux/interrupt.h>
+#include <mach/dma.h>
+#include <linux/atomic.h>
+#include <asm/blackfin.h>
+#include <asm/page.h>
+#include <asm-generic/dma.h>
+#include <asm/bfin_dma.h>
+
+/*-------------------------
+ * config reg bits value
+ *-------------------------*/
+#define DATA_SIZE_8			0
+#define DATA_SIZE_16		1
+#define DATA_SIZE_32		2
+#ifdef CONFIG_BF60x
+#define DATA_SIZE_64		3
+#endif
+
+#define DMA_FLOW_STOP		0
+#define DMA_FLOW_AUTO		1
+#ifdef CONFIG_BF60x
+#define DMA_FLOW_LIST		4
+#define DMA_FLOW_ARRAY		5
+#define DMA_FLOW_LIST_DEMAND	6
+#define DMA_FLOW_ARRAY_DEMAND	7
+#else
+#define DMA_FLOW_ARRAY		4
+#define DMA_FLOW_SMALL		6
+#define DMA_FLOW_LARGE		7
+#endif
+
+#define DIMENSION_LINEAR	0
+#define DIMENSION_2D		1
+
+#define DIR_READ			0
+#define DIR_WRITE			1
+
+#define INTR_DISABLE		0
+#ifdef CONFIG_BF60x
+#define INTR_ON_PERI			1
+#endif
+#define INTR_ON_BUF			2
+#define INTR_ON_ROW			3
+
+#define DMA_NOSYNC_KEEP_DMA_BUF	0
+#define DMA_SYNC_RESTART		1
+
+#ifdef DMA_MMR_SIZE_32
+#define DMA_MMR_SIZE_TYPE long
+#define DMA_MMR_READ bfin_read32
+#define DMA_MMR_WRITE bfin_write32
+#else
+#define DMA_MMR_SIZE_TYPE short
+#define DMA_MMR_READ bfin_read16
+#define DMA_MMR_WRITE bfin_write16
+#endif
+
+struct dma_desc_array {
+	unsigned long start_addr;
+	unsigned DMA_MMR_SIZE_TYPE cfg;
+	unsigned DMA_MMR_SIZE_TYPE x_count;
+	DMA_MMR_SIZE_TYPE x_modify;
+} __attribute__((packed));
+
+struct dmasg {
+	void *next_desc_addr;
+	unsigned long start_addr;
+	unsigned DMA_MMR_SIZE_TYPE cfg;
+	unsigned DMA_MMR_SIZE_TYPE x_count;
+	DMA_MMR_SIZE_TYPE x_modify;
+	unsigned DMA_MMR_SIZE_TYPE y_count;
+	DMA_MMR_SIZE_TYPE y_modify;
+} __attribute__((packed));
+
+struct dma_register {
+	void *next_desc_ptr;	/* DMA Next Descriptor Pointer register */
+	unsigned long start_addr;	/* DMA Start address  register */
+#ifdef CONFIG_BF60x
+	unsigned long cfg;	/* DMA Configuration register */
+
+	unsigned long x_count;	/* DMA x_count register */
+
+	long x_modify;	/* DMA x_modify register */
+
+	unsigned long y_count;	/* DMA y_count register */
+
+	long y_modify;	/* DMA y_modify register */
+
+	unsigned long reserved;
+	unsigned long reserved2;
+
+	void *curr_desc_ptr;	/* DMA Current Descriptor Pointer
+					   register */
+	void *prev_desc_ptr;	/* DMA previous initial Descriptor Pointer
+					   register */
+	unsigned long curr_addr_ptr;	/* DMA Current Address Pointer
+						   register */
+	unsigned long irq_status;	/* DMA irq status register */
+
+	unsigned long curr_x_count;	/* DMA Current x-count register */
+
+	unsigned long curr_y_count;	/* DMA Current y-count register */
+
+	unsigned long reserved3;
+
+	unsigned long bw_limit_count;	/* DMA band width limit count register */
+	unsigned long curr_bw_limit_count;	/* DMA Current band width limit
+							count register */
+	unsigned long bw_monitor_count;	/* DMA band width limit count register */
+	unsigned long curr_bw_monitor_count;	/* DMA Current band width limit
+							count register */
+#else
+	unsigned short cfg;	/* DMA Configuration register */
+	unsigned short dummy1;	/* DMA Configuration register */
+
+	unsigned long reserved;
+
+	unsigned short x_count;	/* DMA x_count register */
+	unsigned short dummy2;
+
+	short x_modify;	/* DMA x_modify register */
+	unsigned short dummy3;
+
+	unsigned short y_count;	/* DMA y_count register */
+	unsigned short dummy4;
+
+	short y_modify;	/* DMA y_modify register */
+	unsigned short dummy5;
+
+	void *curr_desc_ptr;	/* DMA Current Descriptor Pointer
+					   register */
+	unsigned long curr_addr_ptr;	/* DMA Current Address Pointer
+						   register */
+	unsigned short irq_status;	/* DMA irq status register */
+	unsigned short dummy6;
+
+	unsigned short peripheral_map;	/* DMA peripheral map register */
+	unsigned short dummy7;
+
+	unsigned short curr_x_count;	/* DMA Current x-count register */
+	unsigned short dummy8;
+
+	unsigned long reserved2;
+
+	unsigned short curr_y_count;	/* DMA Current y-count register */
+	unsigned short dummy9;
+
+	unsigned long reserved3;
+#endif
+
+};
+
+struct dma_channel {
+	const char *device_id;
+	atomic_t chan_status;
+	volatile struct dma_register *regs;
+	struct dmasg *sg;		/* large mode descriptor */
+	unsigned int irq;
+	void *data;
+#ifdef CONFIG_PM
+	unsigned short saved_peripheral_map;
+#endif
+};
+
+#ifdef CONFIG_PM
+int blackfin_dma_suspend(void);
+void blackfin_dma_resume(void);
+#endif
+
+/*******************************************************************************
+*	DMA API's
+*******************************************************************************/
+extern struct dma_channel dma_ch[MAX_DMA_CHANNELS];
+extern struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS];
+extern int channel2irq(unsigned int channel);
+
+static inline void set_dma_start_addr(unsigned int channel, unsigned long addr)
+{
+	dma_ch[channel].regs->start_addr = addr;
+}
+static inline void set_dma_next_desc_addr(unsigned int channel, void *addr)
+{
+	dma_ch[channel].regs->next_desc_ptr = addr;
+}
+static inline void set_dma_curr_desc_addr(unsigned int channel, void *addr)
+{
+	dma_ch[channel].regs->curr_desc_ptr = addr;
+}
+static inline void set_dma_x_count(unsigned int channel, unsigned DMA_MMR_SIZE_TYPE x_count)
+{
+	dma_ch[channel].regs->x_count = x_count;
+}
+static inline void set_dma_y_count(unsigned int channel, unsigned DMA_MMR_SIZE_TYPE y_count)
+{
+	dma_ch[channel].regs->y_count = y_count;
+}
+static inline void set_dma_x_modify(unsigned int channel, DMA_MMR_SIZE_TYPE x_modify)
+{
+	dma_ch[channel].regs->x_modify = x_modify;
+}
+static inline void set_dma_y_modify(unsigned int channel, DMA_MMR_SIZE_TYPE y_modify)
+{
+	dma_ch[channel].regs->y_modify = y_modify;
+}
+static inline void set_dma_config(unsigned int channel, unsigned DMA_MMR_SIZE_TYPE config)
+{
+	dma_ch[channel].regs->cfg = config;
+}
+static inline void set_dma_curr_addr(unsigned int channel, unsigned long addr)
+{
+	dma_ch[channel].regs->curr_addr_ptr = addr;
+}
+
+#ifdef CONFIG_BF60x
+static inline unsigned long
+set_bfin_dma_config2(char direction, char flow_mode, char intr_mode,
+		     char dma_mode, char mem_width, char syncmode, char peri_width)
+{
+	unsigned long config = 0;
+
+	switch (intr_mode) {
+	case INTR_ON_BUF:
+		if (dma_mode == DIMENSION_2D)
+			config = DI_EN_Y;
+		else
+			config = DI_EN_X;
+		break;
+	case INTR_ON_ROW:
+		config = DI_EN_X;
+		break;
+	case INTR_ON_PERI:
+		config = DI_EN_P;
+		break;
+	};
+
+	return config | (direction << 1) | (mem_width << 8) | (dma_mode << 26) |
+		(flow_mode << 12) | (syncmode << 2) | (peri_width << 4);
+}
+#endif
+
+static inline unsigned DMA_MMR_SIZE_TYPE
+set_bfin_dma_config(char direction, char flow_mode,
+		    char intr_mode, char dma_mode, char mem_width, char syncmode)
+{
+#ifdef CONFIG_BF60x
+	return set_bfin_dma_config2(direction, flow_mode, intr_mode, dma_mode,
+		mem_width, syncmode, mem_width);
+#else
+	return (direction << 1) | (mem_width << 2) | (dma_mode << 4) |
+		(intr_mode << 6) | (flow_mode << 12) | (syncmode << 5);
+#endif
+}
+
+static inline unsigned DMA_MMR_SIZE_TYPE get_dma_curr_irqstat(unsigned int channel)
+{
+	return dma_ch[channel].regs->irq_status;
+}
+static inline unsigned DMA_MMR_SIZE_TYPE get_dma_curr_xcount(unsigned int channel)
+{
+	return dma_ch[channel].regs->curr_x_count;
+}
+static inline unsigned DMA_MMR_SIZE_TYPE get_dma_curr_ycount(unsigned int channel)
+{
+	return dma_ch[channel].regs->curr_y_count;
+}
+static inline void *get_dma_next_desc_ptr(unsigned int channel)
+{
+	return dma_ch[channel].regs->next_desc_ptr;
+}
+static inline void *get_dma_curr_desc_ptr(unsigned int channel)
+{
+	return dma_ch[channel].regs->curr_desc_ptr;
+}
+static inline unsigned DMA_MMR_SIZE_TYPE get_dma_config(unsigned int channel)
+{
+	return dma_ch[channel].regs->cfg;
+}
+static inline unsigned long get_dma_curr_addr(unsigned int channel)
+{
+	return dma_ch[channel].regs->curr_addr_ptr;
+}
+
+static inline void set_dma_sg(unsigned int channel, struct dmasg *sg, int ndsize)
+{
+	/* Make sure the internal data buffers in the core are drained
+	 * so that the DMA descriptors are completely written when the
+	 * DMA engine goes to fetch them below.
+	 */
+	SSYNC();
+
+	dma_ch[channel].regs->next_desc_ptr = sg;
+	dma_ch[channel].regs->cfg =
+		(dma_ch[channel].regs->cfg & ~NDSIZE) |
+		((ndsize << NDSIZE_OFFSET) & NDSIZE);
+}
+
+static inline int dma_channel_active(unsigned int channel)
+{
+	return atomic_read(&dma_ch[channel].chan_status);
+}
+
+static inline void disable_dma(unsigned int channel)
+{
+	dma_ch[channel].regs->cfg &= ~DMAEN;
+	SSYNC();
+}
+static inline void enable_dma(unsigned int channel)
+{
+	dma_ch[channel].regs->curr_x_count = 0;
+	dma_ch[channel].regs->curr_y_count = 0;
+	dma_ch[channel].regs->cfg |= DMAEN;
+}
+int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data);
+
+static inline void dma_disable_irq(unsigned int channel)
+{
+	disable_irq(dma_ch[channel].irq);
+}
+static inline void dma_disable_irq_nosync(unsigned int channel)
+{
+	disable_irq_nosync(dma_ch[channel].irq);
+}
+static inline void dma_enable_irq(unsigned int channel)
+{
+	enable_irq(dma_ch[channel].irq);
+}
+static inline void clear_dma_irqstat(unsigned int channel)
+{
+	dma_ch[channel].regs->irq_status = DMA_DONE | DMA_ERR | DMA_PIRQ;
+}
+
+void *dma_memcpy(void *dest, const void *src, size_t count);
+void *dma_memcpy_nocache(void *dest, const void *src, size_t count);
+void *safe_dma_memcpy(void *dest, const void *src, size_t count);
+void blackfin_dma_early_init(void);
+void early_dma_memcpy(void *dest, const void *src, size_t count);
+void early_dma_memcpy_done(void);
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/dpmc.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/dpmc.h
new file mode 100644
index 0000000..2673b11
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/dpmc.h
@@ -0,0 +1,794 @@
+/*
+ * Miscellaneous IOCTL commands for Dynamic Power Management Controller Driver
+ *
+ * Copyright (C) 2004-2009 Analog Device Inc.
+ *
+ * Licensed under the GPL-2
+ */
+
+#ifndef _BLACKFIN_DPMC_H_
+#define _BLACKFIN_DPMC_H_
+
+#ifdef __ASSEMBLY__
+#define PM_REG0  R7
+#define PM_REG1  R6
+#define PM_REG2  R5
+#define PM_REG3  R4
+#define PM_REG4  R3
+#define PM_REG5  R2
+#define PM_REG6  R1
+#define PM_REG7  R0
+#define PM_REG8  P5
+#define PM_REG9  P4
+#define PM_REG10 P3
+#define PM_REG11 P2
+#define PM_REG12 P1
+#define PM_REG13 P0
+
+#define PM_REGSET0  R7:7
+#define PM_REGSET1  R7:6
+#define PM_REGSET2  R7:5
+#define PM_REGSET3  R7:4
+#define PM_REGSET4  R7:3
+#define PM_REGSET5  R7:2
+#define PM_REGSET6  R7:1
+#define PM_REGSET7  R7:0
+#define PM_REGSET8  R7:0, P5:5
+#define PM_REGSET9  R7:0, P5:4
+#define PM_REGSET10 R7:0, P5:3
+#define PM_REGSET11 R7:0, P5:2
+#define PM_REGSET12 R7:0, P5:1
+#define PM_REGSET13 R7:0, P5:0
+
+#define _PM_PUSH(n, x, w, base) PM_REG##n = w[FP + ((x) - (base))];
+#define _PM_POP(n, x, w, base)  w[FP + ((x) - (base))] = PM_REG##n;
+#define PM_PUSH_SYNC(n)         [--sp] = (PM_REGSET##n);
+#define PM_POP_SYNC(n)          (PM_REGSET##n) = [sp++];
+#define PM_PUSH(n, x)		PM_REG##n = [FP++];
+#define PM_POP(n, x)            [FP--] = PM_REG##n;
+#define PM_CORE_PUSH(n, x)      _PM_PUSH(n, x, , COREMMR_BASE)
+#define PM_CORE_POP(n, x)       _PM_POP(n, x, , COREMMR_BASE)
+#define PM_SYS_PUSH(n, x)       _PM_PUSH(n, x, , SYSMMR_BASE)
+#define PM_SYS_POP(n, x)        _PM_POP(n, x, , SYSMMR_BASE)
+#define PM_SYS_PUSH16(n, x)     _PM_PUSH(n, x, w, SYSMMR_BASE)
+#define PM_SYS_POP16(n, x)      _PM_POP(n, x, w, SYSMMR_BASE)
+
+	.macro bfin_init_pm_bench_cycles
+#ifdef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH
+	R4 = 0;
+	CYCLES = R4;
+	CYCLES2 = R4;
+	R4 = SYSCFG;
+	BITSET(R4, 1);
+	SYSCFG = R4;
+#endif
+	.endm
+
+	.macro bfin_cpu_reg_save
+	/*
+	 * Save the core regs early so we can blow them away when
+	 * saving/restoring MMR states
+	 */
+	[--sp] = (R7:0, P5:0);
+	[--sp] = fp;
+	[--sp] = usp;
+
+	[--sp] = i0;
+	[--sp] = i1;
+	[--sp] = i2;
+	[--sp] = i3;
+
+	[--sp] = m0;
+	[--sp] = m1;
+	[--sp] = m2;
+	[--sp] = m3;
+
+	[--sp] = l0;
+	[--sp] = l1;
+	[--sp] = l2;
+	[--sp] = l3;
+
+	[--sp] = b0;
+	[--sp] = b1;
+	[--sp] = b2;
+	[--sp] = b3;
+	[--sp] = a0.x;
+	[--sp] = a0.w;
+	[--sp] = a1.x;
+	[--sp] = a1.w;
+
+	[--sp] = LC0;
+	[--sp] = LC1;
+	[--sp] = LT0;
+	[--sp] = LT1;
+	[--sp] = LB0;
+	[--sp] = LB1;
+
+	/* We can't push RETI directly as that'll change IPEND[4] */
+	r7 = RETI;
+	[--sp] = RETS;
+	[--sp] = ASTAT;
+#ifndef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH
+	[--sp] = CYCLES;
+	[--sp] = CYCLES2;
+#endif
+	[--sp] = SYSCFG;
+	[--sp] = RETX;
+	[--sp] = SEQSTAT;
+	[--sp] = r7;
+
+	/* Save first func arg in M3 */
+	M3 = R0;
+	.endm
+
+	.macro bfin_cpu_reg_restore
+	/* Restore Core Registers */
+	RETI = [sp++];
+	SEQSTAT = [sp++];
+	RETX = [sp++];
+	SYSCFG = [sp++];
+#ifndef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH
+	CYCLES2 = [sp++];
+	CYCLES = [sp++];
+#endif
+	ASTAT = [sp++];
+	RETS = [sp++];
+
+	LB1 = [sp++];
+	LB0 = [sp++];
+	LT1 = [sp++];
+	LT0 = [sp++];
+	LC1 = [sp++];
+	LC0 = [sp++];
+
+	a1.w = [sp++];
+	a1.x = [sp++];
+	a0.w = [sp++];
+	a0.x = [sp++];
+	b3 = [sp++];
+	b2 = [sp++];
+	b1 = [sp++];
+	b0 = [sp++];
+
+	l3 = [sp++];
+	l2 = [sp++];
+	l1 = [sp++];
+	l0 = [sp++];
+
+	m3 = [sp++];
+	m2 = [sp++];
+	m1 = [sp++];
+	m0 = [sp++];
+
+	i3 = [sp++];
+	i2 = [sp++];
+	i1 = [sp++];
+	i0 = [sp++];
+
+	usp = [sp++];
+	fp = [sp++];
+	(R7:0, P5:0) = [sp++];
+
+	.endm
+
+	.macro bfin_sys_mmr_save
+	/* Save system MMRs */
+	FP.H = hi(SYSMMR_BASE);
+	FP.L = lo(SYSMMR_BASE);
+#ifdef SIC_IMASK0
+	PM_SYS_PUSH(0, SIC_IMASK0)
+	PM_SYS_PUSH(1, SIC_IMASK1)
+# ifdef SIC_IMASK2
+	PM_SYS_PUSH(2, SIC_IMASK2)
+# endif
+#else
+# ifdef SIC_IMASK
+	PM_SYS_PUSH(0, SIC_IMASK)
+# endif
+#endif
+
+#ifdef SIC_IAR0
+	PM_SYS_PUSH(3, SIC_IAR0)
+	PM_SYS_PUSH(4, SIC_IAR1)
+	PM_SYS_PUSH(5, SIC_IAR2)
+#endif
+#ifdef SIC_IAR3
+	PM_SYS_PUSH(6, SIC_IAR3)
+#endif
+#ifdef SIC_IAR4
+	PM_SYS_PUSH(7, SIC_IAR4)
+	PM_SYS_PUSH(8, SIC_IAR5)
+	PM_SYS_PUSH(9, SIC_IAR6)
+#endif
+#ifdef SIC_IAR7
+	PM_SYS_PUSH(10, SIC_IAR7)
+#endif
+#ifdef SIC_IAR8
+	PM_SYS_PUSH(11, SIC_IAR8)
+	PM_SYS_PUSH(12, SIC_IAR9)
+	PM_SYS_PUSH(13, SIC_IAR10)
+#endif
+	PM_PUSH_SYNC(13)
+#ifdef SIC_IAR11
+	PM_SYS_PUSH(0, SIC_IAR11)
+#endif
+
+#ifdef SIC_IWR
+	PM_SYS_PUSH(1, SIC_IWR)
+#endif
+#ifdef SIC_IWR0
+	PM_SYS_PUSH(1, SIC_IWR0)
+#endif
+#ifdef SIC_IWR1
+	PM_SYS_PUSH(2, SIC_IWR1)
+#endif
+#ifdef SIC_IWR2
+	PM_SYS_PUSH(3, SIC_IWR2)
+#endif
+
+#ifdef PINT0_ASSIGN
+	PM_SYS_PUSH(4, PINT0_MASK_SET)
+	PM_SYS_PUSH(5, PINT1_MASK_SET)
+	PM_SYS_PUSH(6, PINT2_MASK_SET)
+	PM_SYS_PUSH(7, PINT3_MASK_SET)
+	PM_SYS_PUSH(8, PINT0_ASSIGN)
+	PM_SYS_PUSH(9, PINT1_ASSIGN)
+	PM_SYS_PUSH(10, PINT2_ASSIGN)
+	PM_SYS_PUSH(11, PINT3_ASSIGN)
+	PM_SYS_PUSH(12, PINT0_INVERT_SET)
+	PM_SYS_PUSH(13, PINT1_INVERT_SET)
+	PM_PUSH_SYNC(13)
+	PM_SYS_PUSH(0, PINT2_INVERT_SET)
+	PM_SYS_PUSH(1, PINT3_INVERT_SET)
+	PM_SYS_PUSH(2, PINT0_EDGE_SET)
+	PM_SYS_PUSH(3, PINT1_EDGE_SET)
+	PM_SYS_PUSH(4, PINT2_EDGE_SET)
+	PM_SYS_PUSH(5, PINT3_EDGE_SET)
+#endif
+
+#ifdef SYSCR
+	PM_SYS_PUSH16(6, SYSCR)
+#endif
+
+#ifdef EBIU_AMGCTL
+	PM_SYS_PUSH16(7, EBIU_AMGCTL)
+	PM_SYS_PUSH(8, EBIU_AMBCTL0)
+	PM_SYS_PUSH(9, EBIU_AMBCTL1)
+#endif
+#ifdef EBIU_FCTL
+	PM_SYS_PUSH(10, EBIU_MBSCTL)
+	PM_SYS_PUSH(11, EBIU_MODE)
+	PM_SYS_PUSH(12, EBIU_FCTL)
+	PM_PUSH_SYNC(12)
+#else
+	PM_PUSH_SYNC(9)
+#endif
+	.endm
+
+
+	.macro bfin_sys_mmr_restore
+/* Restore System MMRs */
+	FP.H = hi(SYSMMR_BASE);
+	FP.L = lo(SYSMMR_BASE);
+
+#ifdef EBIU_FCTL
+	PM_POP_SYNC(12)
+	PM_SYS_POP(12, EBIU_FCTL)
+	PM_SYS_POP(11, EBIU_MODE)
+	PM_SYS_POP(10, EBIU_MBSCTL)
+#else
+	PM_POP_SYNC(9)
+#endif
+
+#ifdef EBIU_AMGCTL
+	PM_SYS_POP(9, EBIU_AMBCTL1)
+	PM_SYS_POP(8, EBIU_AMBCTL0)
+	PM_SYS_POP16(7, EBIU_AMGCTL)
+#endif
+
+#ifdef SYSCR
+	PM_SYS_POP16(6, SYSCR)
+#endif
+
+#ifdef PINT0_ASSIGN
+	PM_SYS_POP(5, PINT3_EDGE_SET)
+	PM_SYS_POP(4, PINT2_EDGE_SET)
+	PM_SYS_POP(3, PINT1_EDGE_SET)
+	PM_SYS_POP(2, PINT0_EDGE_SET)
+	PM_SYS_POP(1, PINT3_INVERT_SET)
+	PM_SYS_POP(0, PINT2_INVERT_SET)
+	PM_POP_SYNC(13)
+	PM_SYS_POP(13, PINT1_INVERT_SET)
+	PM_SYS_POP(12, PINT0_INVERT_SET)
+	PM_SYS_POP(11, PINT3_ASSIGN)
+	PM_SYS_POP(10, PINT2_ASSIGN)
+	PM_SYS_POP(9, PINT1_ASSIGN)
+	PM_SYS_POP(8, PINT0_ASSIGN)
+	PM_SYS_POP(7, PINT3_MASK_SET)
+	PM_SYS_POP(6, PINT2_MASK_SET)
+	PM_SYS_POP(5, PINT1_MASK_SET)
+	PM_SYS_POP(4, PINT0_MASK_SET)
+#endif
+
+#ifdef SIC_IWR2
+	PM_SYS_POP(3, SIC_IWR2)
+#endif
+#ifdef SIC_IWR1
+	PM_SYS_POP(2, SIC_IWR1)
+#endif
+#ifdef SIC_IWR0
+	PM_SYS_POP(1, SIC_IWR0)
+#endif
+#ifdef SIC_IWR
+	PM_SYS_POP(1, SIC_IWR)
+#endif
+
+#ifdef SIC_IAR11
+	PM_SYS_POP(0, SIC_IAR11)
+#endif
+	PM_POP_SYNC(13)
+#ifdef SIC_IAR8
+	PM_SYS_POP(13, SIC_IAR10)
+	PM_SYS_POP(12, SIC_IAR9)
+	PM_SYS_POP(11, SIC_IAR8)
+#endif
+#ifdef SIC_IAR7
+	PM_SYS_POP(10, SIC_IAR7)
+#endif
+#ifdef SIC_IAR6
+	PM_SYS_POP(9, SIC_IAR6)
+	PM_SYS_POP(8, SIC_IAR5)
+	PM_SYS_POP(7, SIC_IAR4)
+#endif
+#ifdef SIC_IAR3
+	PM_SYS_POP(6, SIC_IAR3)
+#endif
+#ifdef SIC_IAR0
+	PM_SYS_POP(5, SIC_IAR2)
+	PM_SYS_POP(4, SIC_IAR1)
+	PM_SYS_POP(3, SIC_IAR0)
+#endif
+#ifdef SIC_IMASK0
+# ifdef SIC_IMASK2
+	PM_SYS_POP(2, SIC_IMASK2)
+# endif
+	PM_SYS_POP(1, SIC_IMASK1)
+	PM_SYS_POP(0, SIC_IMASK0)
+#else
+# ifdef SIC_IMASK
+	PM_SYS_POP(0, SIC_IMASK)
+# endif
+#endif
+	.endm
+
+	.macro bfin_core_mmr_save
+	/* Save Core MMRs */
+	I0.H = hi(COREMMR_BASE);
+	I0.L = lo(COREMMR_BASE);
+	I1 = I0;
+	I2 = I0;
+	I3 = I0;
+	B0 = I0;
+	B1 = I0;
+	B2 = I0;
+	B3 = I0;
+	I1.L = lo(DCPLB_ADDR0);
+	I2.L = lo(DCPLB_DATA0);
+	I3.L = lo(ICPLB_ADDR0);
+	B0.L = lo(ICPLB_DATA0);
+	B1.L = lo(EVT2);
+	B2.L = lo(IMASK);
+	B3.L = lo(TCNTL);
+
+	/* Event Vectors */
+	FP = B1;
+	PM_PUSH(0, EVT2)
+	PM_PUSH(1, EVT3)
+	FP += 4;	/* EVT4 */
+	PM_PUSH(2, EVT5)
+	PM_PUSH(3, EVT6)
+	PM_PUSH(4, EVT7)
+	PM_PUSH(5, EVT8)
+	PM_PUSH_SYNC(5)
+
+	PM_PUSH(0, EVT9)
+	PM_PUSH(1, EVT10)
+	PM_PUSH(2, EVT11)
+	PM_PUSH(3, EVT12)
+	PM_PUSH(4, EVT13)
+	PM_PUSH(5, EVT14)
+	PM_PUSH(6, EVT15)
+
+	/* CEC */
+	FP = B2;
+	PM_PUSH(7, IMASK)
+	FP += 4;	/* IPEND */
+	PM_PUSH(8, ILAT)
+	PM_PUSH(9, IPRIO)
+
+	/* Core Timer */
+	FP = B3;
+	PM_PUSH(10, TCNTL)
+	PM_PUSH(11, TPERIOD)
+	PM_PUSH(12, TSCALE)
+	PM_PUSH(13, TCOUNT)
+	PM_PUSH_SYNC(13)
+
+	/* Misc non-contiguous registers */
+	FP = I0;
+	PM_CORE_PUSH(0, DMEM_CONTROL);
+	PM_CORE_PUSH(1, IMEM_CONTROL);
+	PM_CORE_PUSH(2, TBUFCTL);
+	PM_PUSH_SYNC(2)
+
+	/* DCPLB Addr */
+	FP = I1;
+	PM_PUSH(0, DCPLB_ADDR0)
+	PM_PUSH(1, DCPLB_ADDR1)
+	PM_PUSH(2, DCPLB_ADDR2)
+	PM_PUSH(3, DCPLB_ADDR3)
+	PM_PUSH(4, DCPLB_ADDR4)
+	PM_PUSH(5, DCPLB_ADDR5)
+	PM_PUSH(6, DCPLB_ADDR6)
+	PM_PUSH(7, DCPLB_ADDR7)
+	PM_PUSH(8, DCPLB_ADDR8)
+	PM_PUSH(9, DCPLB_ADDR9)
+	PM_PUSH(10, DCPLB_ADDR10)
+	PM_PUSH(11, DCPLB_ADDR11)
+	PM_PUSH(12, DCPLB_ADDR12)
+	PM_PUSH(13, DCPLB_ADDR13)
+	PM_PUSH_SYNC(13)
+	PM_PUSH(0, DCPLB_ADDR14)
+	PM_PUSH(1, DCPLB_ADDR15)
+
+	/* DCPLB Data */
+	FP = I2;
+	PM_PUSH(2, DCPLB_DATA0)
+	PM_PUSH(3, DCPLB_DATA1)
+	PM_PUSH(4, DCPLB_DATA2)
+	PM_PUSH(5, DCPLB_DATA3)
+	PM_PUSH(6, DCPLB_DATA4)
+	PM_PUSH(7, DCPLB_DATA5)
+	PM_PUSH(8, DCPLB_DATA6)
+	PM_PUSH(9, DCPLB_DATA7)
+	PM_PUSH(10, DCPLB_DATA8)
+	PM_PUSH(11, DCPLB_DATA9)
+	PM_PUSH(12, DCPLB_DATA10)
+	PM_PUSH(13, DCPLB_DATA11)
+	PM_PUSH_SYNC(13)
+	PM_PUSH(0, DCPLB_DATA12)
+	PM_PUSH(1, DCPLB_DATA13)
+	PM_PUSH(2, DCPLB_DATA14)
+	PM_PUSH(3, DCPLB_DATA15)
+
+	/* ICPLB Addr */
+	FP = I3;
+	PM_PUSH(4, ICPLB_ADDR0)
+	PM_PUSH(5, ICPLB_ADDR1)
+	PM_PUSH(6, ICPLB_ADDR2)
+	PM_PUSH(7, ICPLB_ADDR3)
+	PM_PUSH(8, ICPLB_ADDR4)
+	PM_PUSH(9, ICPLB_ADDR5)
+	PM_PUSH(10, ICPLB_ADDR6)
+	PM_PUSH(11, ICPLB_ADDR7)
+	PM_PUSH(12, ICPLB_ADDR8)
+	PM_PUSH(13, ICPLB_ADDR9)
+	PM_PUSH_SYNC(13)
+	PM_PUSH(0, ICPLB_ADDR10)
+	PM_PUSH(1, ICPLB_ADDR11)
+	PM_PUSH(2, ICPLB_ADDR12)
+	PM_PUSH(3, ICPLB_ADDR13)
+	PM_PUSH(4, ICPLB_ADDR14)
+	PM_PUSH(5, ICPLB_ADDR15)
+
+	/* ICPLB Data */
+	FP = B0;
+	PM_PUSH(6, ICPLB_DATA0)
+	PM_PUSH(7, ICPLB_DATA1)
+	PM_PUSH(8, ICPLB_DATA2)
+	PM_PUSH(9, ICPLB_DATA3)
+	PM_PUSH(10, ICPLB_DATA4)
+	PM_PUSH(11, ICPLB_DATA5)
+	PM_PUSH(12, ICPLB_DATA6)
+	PM_PUSH(13, ICPLB_DATA7)
+	PM_PUSH_SYNC(13)
+	PM_PUSH(0, ICPLB_DATA8)
+	PM_PUSH(1, ICPLB_DATA9)
+	PM_PUSH(2, ICPLB_DATA10)
+	PM_PUSH(3, ICPLB_DATA11)
+	PM_PUSH(4, ICPLB_DATA12)
+	PM_PUSH(5, ICPLB_DATA13)
+	PM_PUSH(6, ICPLB_DATA14)
+	PM_PUSH(7, ICPLB_DATA15)
+	PM_PUSH_SYNC(7)
+	.endm
+
+	.macro bfin_core_mmr_restore
+	/* Restore Core MMRs */
+	I0.H = hi(COREMMR_BASE);
+	I0.L = lo(COREMMR_BASE);
+	I1 = I0;
+	I2 = I0;
+	I3 = I0;
+	B0 = I0;
+	B1 = I0;
+	B2 = I0;
+	B3 = I0;
+	I1.L = lo(DCPLB_ADDR15);
+	I2.L = lo(DCPLB_DATA15);
+	I3.L = lo(ICPLB_ADDR15);
+	B0.L = lo(ICPLB_DATA15);
+	B1.L = lo(EVT15);
+	B2.L = lo(IPRIO);
+	B3.L = lo(TCOUNT);
+
+	/* ICPLB Data */
+	FP = B0;
+	PM_POP_SYNC(7)
+	PM_POP(7, ICPLB_DATA15)
+	PM_POP(6, ICPLB_DATA14)
+	PM_POP(5, ICPLB_DATA13)
+	PM_POP(4, ICPLB_DATA12)
+	PM_POP(3, ICPLB_DATA11)
+	PM_POP(2, ICPLB_DATA10)
+	PM_POP(1, ICPLB_DATA9)
+	PM_POP(0, ICPLB_DATA8)
+	PM_POP_SYNC(13)
+	PM_POP(13, ICPLB_DATA7)
+	PM_POP(12, ICPLB_DATA6)
+	PM_POP(11, ICPLB_DATA5)
+	PM_POP(10, ICPLB_DATA4)
+	PM_POP(9, ICPLB_DATA3)
+	PM_POP(8, ICPLB_DATA2)
+	PM_POP(7, ICPLB_DATA1)
+	PM_POP(6, ICPLB_DATA0)
+
+	/* ICPLB Addr */
+	FP = I3;
+	PM_POP(5, ICPLB_ADDR15)
+	PM_POP(4, ICPLB_ADDR14)
+	PM_POP(3, ICPLB_ADDR13)
+	PM_POP(2, ICPLB_ADDR12)
+	PM_POP(1, ICPLB_ADDR11)
+	PM_POP(0, ICPLB_ADDR10)
+	PM_POP_SYNC(13)
+	PM_POP(13, ICPLB_ADDR9)
+	PM_POP(12, ICPLB_ADDR8)
+	PM_POP(11, ICPLB_ADDR7)
+	PM_POP(10, ICPLB_ADDR6)
+	PM_POP(9, ICPLB_ADDR5)
+	PM_POP(8, ICPLB_ADDR4)
+	PM_POP(7, ICPLB_ADDR3)
+	PM_POP(6, ICPLB_ADDR2)
+	PM_POP(5, ICPLB_ADDR1)
+	PM_POP(4, ICPLB_ADDR0)
+
+	/* DCPLB Data */
+	FP = I2;
+	PM_POP(3, DCPLB_DATA15)
+	PM_POP(2, DCPLB_DATA14)
+	PM_POP(1, DCPLB_DATA13)
+	PM_POP(0, DCPLB_DATA12)
+	PM_POP_SYNC(13)
+	PM_POP(13, DCPLB_DATA11)
+	PM_POP(12, DCPLB_DATA10)
+	PM_POP(11, DCPLB_DATA9)
+	PM_POP(10, DCPLB_DATA8)
+	PM_POP(9, DCPLB_DATA7)
+	PM_POP(8, DCPLB_DATA6)
+	PM_POP(7, DCPLB_DATA5)
+	PM_POP(6, DCPLB_DATA4)
+	PM_POP(5, DCPLB_DATA3)
+	PM_POP(4, DCPLB_DATA2)
+	PM_POP(3, DCPLB_DATA1)
+	PM_POP(2, DCPLB_DATA0)
+
+	/* DCPLB Addr */
+	FP = I1;
+	PM_POP(1, DCPLB_ADDR15)
+	PM_POP(0, DCPLB_ADDR14)
+	PM_POP_SYNC(13)
+	PM_POP(13, DCPLB_ADDR13)
+	PM_POP(12, DCPLB_ADDR12)
+	PM_POP(11, DCPLB_ADDR11)
+	PM_POP(10, DCPLB_ADDR10)
+	PM_POP(9, DCPLB_ADDR9)
+	PM_POP(8, DCPLB_ADDR8)
+	PM_POP(7, DCPLB_ADDR7)
+	PM_POP(6, DCPLB_ADDR6)
+	PM_POP(5, DCPLB_ADDR5)
+	PM_POP(4, DCPLB_ADDR4)
+	PM_POP(3, DCPLB_ADDR3)
+	PM_POP(2, DCPLB_ADDR2)
+	PM_POP(1, DCPLB_ADDR1)
+	PM_POP(0, DCPLB_ADDR0)
+
+
+	/* Misc non-contiguous registers */
+
+	/* icache & dcache will enable later 
+	   drop IMEM_CONTROL, DMEM_CONTROL pop
+	*/
+	FP = I0;
+	PM_POP_SYNC(2)
+	PM_CORE_POP(2, TBUFCTL)
+	PM_CORE_POP(1, IMEM_CONTROL)
+	PM_CORE_POP(0, DMEM_CONTROL)
+
+	/* Core Timer */
+	FP = B3;
+	R0 = 0x1;
+	[FP - 0xC] = R0;
+
+	PM_POP_SYNC(13)
+	FP = B3;
+	PM_POP(13, TCOUNT)
+	PM_POP(12, TSCALE)
+	PM_POP(11, TPERIOD)
+	PM_POP(10, TCNTL)
+
+	/* CEC */
+	FP = B2;
+	PM_POP(9, IPRIO)
+	PM_POP(8, ILAT)
+	FP += -4;	/* IPEND */
+	PM_POP(7, IMASK)
+
+	/* Event Vectors */
+	FP = B1;
+	PM_POP(6, EVT15)
+	PM_POP(5, EVT14)
+	PM_POP(4, EVT13)
+	PM_POP(3, EVT12)
+	PM_POP(2, EVT11)
+	PM_POP(1, EVT10)
+	PM_POP(0, EVT9)
+	PM_POP_SYNC(5)
+	PM_POP(5, EVT8)
+	PM_POP(4, EVT7)
+	PM_POP(3, EVT6)
+	PM_POP(2, EVT5)
+	FP += -4;	/* EVT4 */
+	PM_POP(1, EVT3)
+	PM_POP(0, EVT2)
+	.endm
+#endif
+
+#include <mach/pll.h>
+
+/* PLL_CTL Masks */
+#define DF			0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
+#define PLL_OFF			0x0002	/* PLL Not Powered */
+#define STOPCK			0x0008	/* Core Clock Off */
+#define PDWN			0x0020	/* Enter Deep Sleep Mode */
+#ifdef __ADSPBF539__
+# define IN_DELAY		0x0014	/* Add 200ps Delay To EBIU Input Latches */
+# define OUT_DELAY		0x00C0	/* Add 200ps Delay To EBIU Output Signals */
+#else
+# define IN_DELAY		0x0040	/* Add 200ps Delay To EBIU Input Latches */
+# define OUT_DELAY		0x0080	/* Add 200ps Delay To EBIU Output Signals */
+#endif
+#define BYPASS			0x0100	/* Bypass the PLL */
+#define MSEL			0x7E00	/* Multiplier Select For CCLK/VCO Factors */
+#define SPORT_HYST		0x8000	/* Enable Additional Hysteresis on SPORT Input Pins */
+#define SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
+
+/* PLL_DIV Masks */
+#define SSEL			0x000F	/* System Select */
+#define CSEL			0x0030	/* Core Select */
+#define CSEL_DIV1		0x0000	/* CCLK = VCO / 1 */
+#define CSEL_DIV2		0x0010	/* CCLK = VCO / 2 */
+#define CSEL_DIV4		0x0020	/* CCLK = VCO / 4 */
+#define CSEL_DIV8		0x0030	/* CCLK = VCO / 8 */
+
+#define CCLK_DIV1 CSEL_DIV1
+#define CCLK_DIV2 CSEL_DIV2
+#define CCLK_DIV4 CSEL_DIV4
+#define CCLK_DIV8 CSEL_DIV8
+
+#define SET_SSEL(x)	((x) & 0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
+#define SCLK_DIV(x)	(x)		/* SCLK = VCO / x */
+
+/* PLL_STAT Masks */
+#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled */
+#define FULL_ON			0x0002	/* Processor In Full On Mode */
+#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled */
+#define PLL_LOCKED		0x0020	/* PLL_LOCKCNT Has Been Reached */
+
+#define RTCWS			0x0400	/* RTC/Reset Wake-Up Status */
+#define CANWS			0x0800	/* CAN Wake-Up Status */
+#define USBWS			0x2000	/* USB Wake-Up Status */
+#define KPADWS			0x4000	/* Keypad Wake-Up Status */
+#define ROTWS			0x8000	/* Rotary Wake-Up Status */
+#define GPWS			0x1000	/* General-Purpose Wake-Up Status */
+
+/* VR_CTL Masks */
+#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
+#define FREQ			0x3000	/* Switching Oscillator Frequency For Regulator */
+#define FREQ_1000		0x3000	/* Switching Frequency Is 1 MHz */
+#else
+#define FREQ			0x0003	/* Switching Oscillator Frequency For Regulator */
+#define FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
+#define FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
+#define FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
+#endif
+#define HIBERNATE		0x0000	/* Powerdown/Bypass On-Board Regulation */
+
+#define GAIN			0x000C	/* Voltage Level Gain */
+#define GAIN_5			0x0000	/* GAIN = 5 */
+#define GAIN_10			0x0004	/* GAIN = 1 */
+#define GAIN_20			0x0008	/* GAIN = 2 */
+#define GAIN_50			0x000C	/* GAIN = 5 */
+
+#define VLEV			0x00F0	/* Internal Voltage Level */
+#ifdef __ADSPBF52x__
+#define VLEV_085		0x0040	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090		0x0050	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095		0x0060	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100		0x0070	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105		0x0080	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110		0x0090	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115		0x00A0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120		0x00B0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#else
+#define VLEV_085		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
+#endif
+
+#ifdef CONFIG_BF60x
+#define PA15WE			0x00000001 /* Allow Wake-Up from PA15 */
+#define PB15WE			0x00000002 /* Allow Wake-Up from PB15 */
+#define PC15WE			0x00000004 /* Allow Wake-Up from PC15 */
+#define PD06WE			0x00000008 /* Allow Wake-Up from PD06(ETH0_PHYINT) */
+#define PE12WE			0x00000010 /* Allow Wake-Up from PE12(ETH1_PHYINT, PUSH BUTTON) */
+#define PG04WE			0x00000020 /* Allow Wake-Up from PG04(CAN0_RX) */
+#define PG13WE			0x00000040 /* Allow Wake-Up from PG13 */
+#define USBWE			0x00000080 /* Allow Wake-Up from (USB) */
+#else
+#define WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate */
+#define CANWE			0x0200	/* Enable CAN Wakeup From Hibernate */
+#define PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate */
+#define GPWE			0x0400	/* General-Purpose Wake-Up Enable */
+#define MXVRWE			0x0400	/* Enable MXVR Wakeup From Hibernate */
+#define KPADWE			0x1000	/* Keypad Wake-Up Enable */
+#define ROTWE			0x2000	/* Rotary Wake-Up Enable */
+#define CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
+#define SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */
+
+#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
+#define USBWE			0x0200	/* Enable USB Wakeup From Hibernate */
+#else
+#define USBWE			0x0800	/* Enable USB Wakeup From Hibernate */
+#endif
+#endif
+
+#ifndef __ASSEMBLY__
+
+void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void do_hibernate(int wakeup);
+void set_dram_srfs(void);
+void unset_dram_srfs(void);
+
+#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
+
+#ifdef CONFIG_CPU_FREQ
+#define CPUFREQ_CPU 0
+#endif
+struct bfin_dpmc_platform_data {
+	const unsigned int *tuple_tab;
+	unsigned short tabsize;
+	unsigned short vr_settling_time; /* in us */
+};
+
+#endif
+
+#endif	/*_BLACKFIN_DPMC_H_*/
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/early_printk.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/early_printk.h
new file mode 100644
index 0000000..68a910d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/early_printk.h
@@ -0,0 +1,36 @@
+/*
+ * function prototpyes for early printk
+ *
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_EARLY_PRINTK_H__
+#define __ASM_EARLY_PRINTK_H__
+
+#ifdef CONFIG_EARLY_PRINTK
+/* For those that don't include it already */
+#include <linux/console.h>
+
+extern int setup_early_printk(char *);
+extern void enable_shadow_console(void);
+extern int shadow_console_enabled(void);
+extern void mark_shadow_error(void);
+extern void early_shadow_reg(unsigned long reg, unsigned int n);
+extern void early_shadow_write(struct console *con, const char *s,
+	unsigned int n) __attribute__((nonnull(2)));
+#define early_shadow_puts(str) early_shadow_write(NULL, str, strlen(str))
+#define early_shadow_stamp() \
+	do { \
+		early_shadow_puts(__FILE__ " : " __stringify(__LINE__) " ["); \
+		early_shadow_puts(__func__); \
+		early_shadow_puts("]\n"); \
+	} while (0)
+#else
+#define setup_early_printk(fmt) do { } while (0)
+#define enable_shadow_console(fmt)  do { } while (0)
+#define early_shadow_stamp() do { } while (0)
+#endif /* CONFIG_EARLY_PRINTK */
+
+#endif /* __ASM_EARLY_PRINTK_H__ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/elf.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/elf.h
new file mode 100644
index 0000000..d15cb9b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/elf.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASMBFIN_ELF_H
+#define __ASMBFIN_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/* Processor specific flags for the ELF header e_flags field.  */
+#define EF_BFIN_PIC		0x00000001	/* -fpic */
+#define EF_BFIN_FDPIC		0x00000002	/* -mfdpic */
+#define EF_BFIN_CODE_IN_L1	0x00000010	/* --code-in-l1 */
+#define EF_BFIN_DATA_IN_L1	0x00000020	/* --data-in-l1 */
+#define EF_BFIN_CODE_IN_L2	0x00000040	/* --code-in-l2 */
+#define EF_BFIN_DATA_IN_L2	0x00000080	/* --data-in-l2 */
+
+#if 1	/* core dumps not supported, but linux/elfcore.h needs these */
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct { } elf_fpregset_t;
+#endif
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_BLACKFIN)
+
+#define elf_check_fdpic(x) ((x)->e_flags & EF_BFIN_FDPIC /* && !((x)->e_flags & EF_FRV_NON_PIC_RELOCS) */)
+#define elf_check_const_displacement(x) ((x)->e_flags & EF_BFIN_PIC)
+
+/* EM_BLACKFIN defined in linux/elf.h	*/
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_BLACKFIN
+
+#define ELF_PLAT_INIT(_r)	_r->p1 = 0
+
+#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, _dynamic_addr)	\
+do {											\
+	_regs->r7	= 0;						\
+	_regs->p0	= _exec_map_addr;				\
+	_regs->p1	= _interp_map_addr;				\
+	_regs->p2	= _dynamic_addr;				\
+} while(0)
+
+#if 0
+#define CORE_DUMP_USE_REGSET
+#endif
+#define ELF_FDPIC_CORE_EFLAGS	EF_BFIN_FDPIC
+#define ELF_EXEC_PAGESIZE	4096
+
+#define R_BFIN_UNUSED0         0   /* relocation type 0 is not defined */
+#define R_BFIN_PCREL5M2        1   /* LSETUP part a */
+#define R_BFIN_UNUSED1         2   /* relocation type 2 is not defined */
+#define R_BFIN_PCREL10         3   /* type 3, if cc jump <target> */
+#define R_BFIN_PCREL12_JUMP    4   /* type 4, jump <target> */
+#define R_BFIN_RIMM16          5   /* type 0x5, rN = <target> */
+#define R_BFIN_LUIMM16         6   /* # 0x6, preg.l=<target> Load imm 16 to lower half */
+#define R_BFIN_HUIMM16         7   /* # 0x7, preg.h=<target> Load imm 16 to upper half */
+#define R_BFIN_PCREL12_JUMP_S  8   /* # 0x8 jump.s <target> */
+#define R_BFIN_PCREL24_JUMP_X  9   /* # 0x9 jump.x <target> */
+#define R_BFIN_PCREL24         10  /* # 0xa call <target> , not expandable */
+#define R_BFIN_UNUSEDB         11  /* # 0xb not generated */
+#define R_BFIN_UNUSEDC         12  /* # 0xc  not used */
+#define R_BFIN_PCREL24_JUMP_L  13  /* 0xd jump.l <target> */
+#define R_BFIN_PCREL24_CALL_X  14  /* 0xE, call.x <target> if <target> is above 24 bit limit call through P1 */
+#define R_BFIN_VAR_EQ_SYMB     15  /* 0xf, linker should treat it same as 0x12 */
+#define R_BFIN_BYTE_DATA       16  /* 0x10, .byte var = symbol */
+#define R_BFIN_BYTE2_DATA      17  /* 0x11, .byte2 var = symbol */
+#define R_BFIN_BYTE4_DATA      18  /* 0x12, .byte4 var = symbol and .var var=symbol */
+#define R_BFIN_PCREL11         19  /* 0x13, lsetup part b */
+#define R_BFIN_UNUSED14        20  /* 0x14, undefined */
+#define R_BFIN_UNUSED15        21  /* not generated by VDSP 3.5 */
+
+/* arithmetic relocations */
+#define R_BFIN_PUSH            0xE0
+#define R_BFIN_CONST           0xE1
+#define R_BFIN_ADD             0xE2
+#define R_BFIN_SUB             0xE3
+#define R_BFIN_MULT            0xE4
+#define R_BFIN_DIV             0xE5
+#define R_BFIN_MOD             0xE6
+#define R_BFIN_LSHIFT          0xE7
+#define R_BFIN_RSHIFT          0xE8
+#define R_BFIN_AND             0xE9
+#define R_BFIN_OR              0xEA
+#define R_BFIN_XOR             0xEB
+#define R_BFIN_LAND            0xEC
+#define R_BFIN_LOR             0xED
+#define R_BFIN_LEN             0xEE
+#define R_BFIN_NEG             0xEF
+#define R_BFIN_COMP            0xF0
+#define R_BFIN_PAGE            0xF1
+#define R_BFIN_HWPAGE          0xF2
+#define R_BFIN_ADDR            0xF3
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         0xD0000000UL
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)	\
+        memcpy((char *) &pr_reg, (char *)regs,  \
+               sizeof(struct pt_regs));
+#define ELF_CORE_COPY_FPREGS(...) 0	/* Blackfin has no FPU */
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM  (NULL)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/entry.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/entry.h
new file mode 100644
index 0000000..4104d57
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/entry.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_ENTRY_H
+#define __BFIN_ENTRY_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#ifdef __ASSEMBLY__
+
+#define	LFLUSH_I_AND_D	0x00000808
+#define	LSIGTRAP	5
+
+/*
+ * NOTE!  The single-stepping code assumes that all interrupt handlers
+ * start by saving SYSCFG on the stack with their first instruction.
+ */
+
+/* This one is used for exceptions, emulation, and NMI.  It doesn't push
+   RETI and doesn't do cli.  */
+#define SAVE_ALL_SYS		save_context_no_interrupts
+/* This is used for all normal interrupts.  It saves a minimum of registers
+   to the stack, loads the IRQ number, and jumps to common code.  */
+#ifdef CONFIG_IPIPE
+# define LOAD_IPIPE_IPEND \
+	P0.l = lo(IPEND); \
+	P0.h = hi(IPEND); \
+	R1 = [P0];
+#else
+# define LOAD_IPIPE_IPEND
+#endif
+
+/*
+ * Workaround for anomalies 05000283 and 05000315
+ */
+#if ANOMALY_05000283 || ANOMALY_05000315
+# define ANOMALY_283_315_WORKAROUND(preg, dreg)		\
+	cc = dreg == dreg;				\
+	preg.h = HI(CHIPID);				\
+	preg.l = LO(CHIPID);				\
+	if cc jump 1f;					\
+	dreg.l = W[preg];				\
+1:
+#else
+# define ANOMALY_283_315_WORKAROUND(preg, dreg)
+#endif /* ANOMALY_05000283 || ANOMALY_05000315 */
+
+#ifndef CONFIG_EXACT_HWERR
+/* As a debugging aid - we save IPEND when DEBUG_KERNEL is on,
+ * otherwise it is a waste of cycles.
+ */
+# ifndef CONFIG_DEBUG_KERNEL
+#define INTERRUPT_ENTRY(N)						\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    R0 = (N);								\
+    LOAD_IPIPE_IPEND							\
+    jump __common_int_entry;
+# else /* CONFIG_DEBUG_KERNEL */
+#define INTERRUPT_ENTRY(N)						\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
+    R0 = (N);								\
+    LOAD_IPIPE_IPEND							\
+    jump __common_int_entry;
+# endif /* CONFIG_DEBUG_KERNEL */
+
+/* For timer interrupts, we need to save IPEND, since the user_mode
+ *macro accesses it to determine where to account time.
+ */
+#define TIMER_INTERRUPT_ENTRY(N)					\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
+    R0 = (N);								\
+    jump __common_int_entry;
+#else /* CONFIG_EXACT_HWERR is defined */
+
+/* if we want hardware error to be exact, we need to do a SSYNC (which forces
+ * read/writes to complete to the memory controllers), and check to see that
+ * caused a pending HW error condition. If so, we assume it was caused by user
+ * space, by setting the same interrupt that we are in (so it goes off again)
+ * and context restore, and a RTI (without servicing anything). This should
+ * cause the pending HWERR to fire, and when that is done, this interrupt will
+ * be re-serviced properly.
+ * As you can see by the code - we actually need to do two SSYNCS - one to
+ * make sure the read/writes complete, and another to make sure the hardware
+ * error is recognized by the core.
+ *
+ * The extra nop before the SSYNC is to make sure we work around 05000244,
+ * since the 283/315 workaround includes a branch to the end
+ */
+#define INTERRUPT_ENTRY(N)						\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    R1 = ASTAT;								\
+    ANOMALY_283_315_WORKAROUND(p0, r0)					\
+    P0.L = LO(ILAT);							\
+    P0.H = HI(ILAT);							\
+    NOP;								\
+    SSYNC;								\
+    SSYNC;								\
+    R0 = [P0];								\
+    CC = BITTST(R0, EVT_IVHW_P);					\
+    IF CC JUMP 1f;							\
+    ASTAT = R1;								\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
+    R0 = (N);								\
+    LOAD_IPIPE_IPEND							\
+    jump __common_int_entry;						\
+1:  ASTAT = R1;								\
+    RAISE N;								\
+    (R7:0, P5:0) = [SP++];						\
+    SP += 0x8;								\
+    SYSCFG = [SP++];							\
+    CSYNC;								\
+    RTI;
+
+#define TIMER_INTERRUPT_ENTRY(N)					\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    R1 = ASTAT;								\
+    ANOMALY_283_315_WORKAROUND(p0, r0)					\
+    P0.L = LO(ILAT);							\
+    P0.H = HI(ILAT);							\
+    NOP;								\
+    SSYNC;								\
+    SSYNC;								\
+    R0 = [P0];								\
+    CC = BITTST(R0, EVT_IVHW_P);					\
+    IF CC JUMP 1f;							\
+    ASTAT = R1;								\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
+    R0 = (N);								\
+    jump __common_int_entry;						\
+1:  ASTAT = R1;								\
+    RAISE N;								\
+    (R7:0, P5:0) = [SP++];						\
+    SP += 0x8;								\
+    SYSCFG = [SP++];							\
+    CSYNC;								\
+    RTI;
+#endif	/* CONFIG_EXACT_HWERR */
+
+/* This one pushes RETI without using CLI.  Interrupts are enabled.  */
+#define SAVE_CONTEXT_SYSCALL	save_context_syscall
+#define SAVE_CONTEXT		save_context_with_interrupts
+#define SAVE_CONTEXT_CPLB	save_context_cplb
+
+#define RESTORE_ALL_SYS		restore_context_no_interrupts
+#define RESTORE_CONTEXT		restore_context_with_interrupts
+#define RESTORE_CONTEXT_CPLB	restore_context_cplb
+
+#endif				/* __ASSEMBLY__ */
+#endif				/* __BFIN_ENTRY_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/exec.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/exec.h
new file mode 100644
index 0000000..54c2e1d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/exec.h
@@ -0,0 +1 @@
+/* define arch_align_stack() here */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/fixed_code.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/fixed_code.h
new file mode 100644
index 0000000..bc330f0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/fixed_code.h
@@ -0,0 +1,30 @@
+/*
+ * This file defines the fixed addresses where userspace programs
+ * can find atomic code sequences.
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+#ifndef __BFIN_ASM_FIXED_CODE_H__
+#define __BFIN_ASM_FIXED_CODE_H__
+
+#include <uapi/asm/fixed_code.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/linkage.h>
+#include <linux/ptrace.h>
+extern asmlinkage void finish_atomic_sections(struct pt_regs *regs);
+extern char fixed_code_start;
+extern char fixed_code_end;
+extern int atomic_xchg32(void);
+extern int atomic_cas32(void);
+extern int atomic_add32(void);
+extern int atomic_sub32(void);
+extern int atomic_ior32(void);
+extern int atomic_and32(void);
+extern int atomic_xor32(void);
+extern void safe_user_instruction(void);
+extern void sigreturn_stub(void);
+#endif
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/flat.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/flat.h
new file mode 100644
index 0000000..f1d6ba7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/flat.h
@@ -0,0 +1,62 @@
+/*
+ * uClinux flat-format executables
+ *
+ * Copyright 2003-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2
+ */
+
+#ifndef __BLACKFIN_FLAT_H__
+#define __BLACKFIN_FLAT_H__
+
+#include <asm/unaligned.h>
+
+#define	flat_argvp_envp_on_stack()		0
+#define	flat_old_ram_flag(flags)		(flags)
+
+extern unsigned long bfin_get_addr_from_rp (u32 *ptr, u32 relval,
+					u32 flags, u32 *persistent);
+
+extern void bfin_put_addr_at_rp(u32 *ptr, u32 addr, u32 relval);
+
+/* The amount by which a relocation can exceed the program image limits
+   without being regarded as an error.  */
+
+#define	flat_reloc_valid(reloc, size)	((reloc) <= (size))
+
+static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
+					u32 *addr, u32 *persistent)
+{
+	*addr = bfin_get_addr_from_rp(rp, relval, flags, persistent);
+	return 0;
+}
+
+static inline int flat_put_addr_at_rp(u32 __user *rp, u32 val, u32 relval)
+{
+	bfin_put_addr_at_rp(rp, val, relval);
+	return 0;
+}
+
+/* Convert a relocation entry into an address.  */
+static inline unsigned long
+flat_get_relocate_addr (unsigned long relval)
+{
+	return relval & 0x03ffffff; /* Mask out top 6 bits */
+}
+
+static inline int flat_set_persistent(u32 relval, u32 *persistent)
+{
+	int type = (relval >> 26) & 7;
+	if (type == 3) {
+		*persistent = relval << 16;
+		return 1;
+	}
+	return 0;
+}
+
+static inline int flat_addr_absolute(unsigned long relval)
+{
+	return (relval & (1 << 29)) != 0;
+}
+
+#endif				/* __BLACKFIN_FLAT_H__ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/ftrace.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/ftrace.h
new file mode 100644
index 0000000..2f1c3c2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/ftrace.h
@@ -0,0 +1,73 @@
+/*
+ * Blackfin ftrace code
+ *
+ * Copyright 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_FTRACE_H__
+#define __ASM_BFIN_FTRACE_H__
+
+#define MCOUNT_INSN_SIZE	6 /* sizeof "[++sp] = rets; call __mcount;" */
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+extern void _mcount(void);
+#define MCOUNT_ADDR ((unsigned long)_mcount)
+
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr;
+}
+
+struct dyn_arch_ftrace {
+	/* No extra data needed for Blackfin */
+};
+
+#endif
+
+#ifdef CONFIG_FRAME_POINTER
+#include <linux/mm.h>
+
+extern inline void *return_address(unsigned int level)
+{
+	unsigned long *endstack, *fp, *ret_addr;
+	unsigned int current_level = 0;
+
+	if (level == 0)
+		return __builtin_return_address(0);
+
+	fp = (unsigned long *)__builtin_frame_address(0);
+	endstack = (unsigned long *)PAGE_ALIGN((unsigned long)&level);
+
+	while (((unsigned long)fp & 0x3) == 0 && fp &&
+	       (fp + 1) < endstack && current_level < level) {
+		fp = (unsigned long *)*fp;
+		current_level++;
+	}
+
+	if (((unsigned long)fp & 0x3) == 0 && fp &&
+	    (fp + 1) < endstack)
+		ret_addr = (unsigned long *)*(fp + 1);
+	else
+		ret_addr = NULL;
+
+	return ret_addr;
+}
+
+#else
+
+extern inline void *return_address(unsigned int level)
+{
+	return NULL;
+}
+
+#endif /* CONFIG_FRAME_POINTER */
+
+#define ftrace_return_address(n) return_address(n)
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/gpio.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/gpio.h
new file mode 100644
index 0000000..99d338c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/gpio.h
@@ -0,0 +1,214 @@
+/*
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ARCH_BLACKFIN_GPIO_H__
+#define __ARCH_BLACKFIN_GPIO_H__
+
+#define gpio_bank(x)	((x) >> 4)
+#define gpio_bit(x)	(1<<((x) & 0xF))
+#define gpio_sub_n(x)	((x) & 0xF)
+
+#define GPIO_BANKSIZE	16
+#define GPIO_BANK_NUM	DIV_ROUND_UP(MAX_BLACKFIN_GPIOS, GPIO_BANKSIZE)
+
+#include <mach/gpio.h>
+
+#define PERIPHERAL_USAGE 1
+#define GPIO_USAGE 0
+
+#ifndef BFIN_GPIO_PINT
+# define BFIN_GPIO_PINT 0
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifndef CONFIG_PINCTRL
+
+#include <linux/compiler.h>
+#include <asm/blackfin.h>
+#include <asm/portmux.h>
+#include <asm/irq_handler.h>
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin General Purpose Ports Access Functions
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+*
+*
+* DESCRIPTION: These functions abstract direct register access
+*              to Blackfin processor General Purpose
+*              Ports Regsiters
+*
+* CAUTION: These functions do not belong to the GPIO Driver API
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+void set_gpio_dir(unsigned, unsigned short);
+void set_gpio_inen(unsigned, unsigned short);
+void set_gpio_polar(unsigned, unsigned short);
+void set_gpio_edge(unsigned, unsigned short);
+void set_gpio_both(unsigned, unsigned short);
+void set_gpio_data(unsigned, unsigned short);
+void set_gpio_maska(unsigned, unsigned short);
+void set_gpio_maskb(unsigned, unsigned short);
+void set_gpio_toggle(unsigned);
+void set_gpiop_dir(unsigned, unsigned short);
+void set_gpiop_inen(unsigned, unsigned short);
+void set_gpiop_polar(unsigned, unsigned short);
+void set_gpiop_edge(unsigned, unsigned short);
+void set_gpiop_both(unsigned, unsigned short);
+void set_gpiop_data(unsigned, unsigned short);
+void set_gpiop_maska(unsigned, unsigned short);
+void set_gpiop_maskb(unsigned, unsigned short);
+unsigned short get_gpio_dir(unsigned);
+unsigned short get_gpio_inen(unsigned);
+unsigned short get_gpio_polar(unsigned);
+unsigned short get_gpio_edge(unsigned);
+unsigned short get_gpio_both(unsigned);
+unsigned short get_gpio_maska(unsigned);
+unsigned short get_gpio_maskb(unsigned);
+unsigned short get_gpio_data(unsigned);
+unsigned short get_gpiop_dir(unsigned);
+unsigned short get_gpiop_inen(unsigned);
+unsigned short get_gpiop_polar(unsigned);
+unsigned short get_gpiop_edge(unsigned);
+unsigned short get_gpiop_both(unsigned);
+unsigned short get_gpiop_maska(unsigned);
+unsigned short get_gpiop_maskb(unsigned);
+unsigned short get_gpiop_data(unsigned);
+
+struct gpio_port_t {
+	unsigned short data;
+	unsigned short dummy1;
+	unsigned short data_clear;
+	unsigned short dummy2;
+	unsigned short data_set;
+	unsigned short dummy3;
+	unsigned short toggle;
+	unsigned short dummy4;
+	unsigned short maska;
+	unsigned short dummy5;
+	unsigned short maska_clear;
+	unsigned short dummy6;
+	unsigned short maska_set;
+	unsigned short dummy7;
+	unsigned short maska_toggle;
+	unsigned short dummy8;
+	unsigned short maskb;
+	unsigned short dummy9;
+	unsigned short maskb_clear;
+	unsigned short dummy10;
+	unsigned short maskb_set;
+	unsigned short dummy11;
+	unsigned short maskb_toggle;
+	unsigned short dummy12;
+	unsigned short dir;
+	unsigned short dummy13;
+	unsigned short polar;
+	unsigned short dummy14;
+	unsigned short edge;
+	unsigned short dummy15;
+	unsigned short both;
+	unsigned short dummy16;
+	unsigned short inen;
+};
+
+#ifdef BFIN_SPECIAL_GPIO_BANKS
+void bfin_special_gpio_free(unsigned gpio);
+int bfin_special_gpio_request(unsigned gpio, const char *label);
+# ifdef CONFIG_PM
+void bfin_special_gpio_pm_hibernate_restore(void);
+void bfin_special_gpio_pm_hibernate_suspend(void);
+# endif
+#endif
+
+#ifdef CONFIG_PM
+void bfin_gpio_pm_hibernate_restore(void);
+void bfin_gpio_pm_hibernate_suspend(void);
+int bfin_gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl);
+int bfin_gpio_pm_standby_ctrl(unsigned ctrl);
+
+static inline int bfin_pm_standby_setup(void)
+{
+	return bfin_gpio_pm_standby_ctrl(1);
+}
+
+static inline void bfin_pm_standby_restore(void)
+{
+	bfin_gpio_pm_standby_ctrl(0);
+}
+
+
+struct gpio_port_s {
+	unsigned short data;
+	unsigned short maska;
+	unsigned short maskb;
+	unsigned short dir;
+	unsigned short polar;
+	unsigned short edge;
+	unsigned short both;
+	unsigned short inen;
+
+	unsigned short fer;
+	unsigned short reserved;
+	unsigned short mux;
+};
+#endif /*CONFIG_PM*/
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin GPIO Driver
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+*
+*
+* DESCRIPTION: Blackfin GPIO Driver API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+int bfin_gpio_irq_request(unsigned gpio, const char *label);
+void bfin_gpio_irq_free(unsigned gpio);
+void bfin_gpio_irq_prepare(unsigned gpio);
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq - GPIO_IRQ_BASE;
+}
+#endif /* CONFIG_PINCTRL */
+
+#include <asm/irq.h>
+#include <asm/errno.h>
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return __gpio_to_irq(gpio);
+}
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ARCH_BLACKFIN_GPIO_H__ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/gptimers.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/gptimers.h
new file mode 100644
index 0000000..381e3d6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/gptimers.h
@@ -0,0 +1,337 @@
+/*
+ * gptimers.h - Blackfin General Purpose Timer structs/defines/prototypes
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ * Copyright (C) 2005 John DeHority
+ * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de)
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef _BLACKFIN_TIMERS_H_
+#define _BLACKFIN_TIMERS_H_
+
+#include <linux/types.h>
+#include <asm/blackfin.h>
+
+/*
+ * BF51x/BF52x/BF537: 8 timers:
+ */
+#if defined(CONFIG_BF51x) || defined(CONFIG_BF52x) || defined(BF537_FAMILY)
+# define MAX_BLACKFIN_GPTIMERS 8
+# define TIMER0_GROUP_REG      TIMER_ENABLE
+#endif
+/*
+ * BF54x: 11 timers (BF542: 8 timers):
+ */
+#if defined(CONFIG_BF54x)
+# ifdef CONFIG_BF542
+#  define MAX_BLACKFIN_GPTIMERS 8
+# else
+#  define MAX_BLACKFIN_GPTIMERS 11
+#  define TIMER8_GROUP_REG      TIMER_ENABLE1
+#  define TIMER_GROUP2          1
+# endif
+# define TIMER0_GROUP_REG       TIMER_ENABLE0
+#endif
+/*
+ * BF561: 12 timers:
+ */
+#if defined(CONFIG_BF561)
+# define MAX_BLACKFIN_GPTIMERS 12
+# define TIMER0_GROUP_REG      TMRS8_ENABLE
+# define TIMER8_GROUP_REG      TMRS4_ENABLE
+# define TIMER_GROUP2          1
+#endif
+/*
+ * BF609: 8 timers:
+ */
+#if defined(CONFIG_BF60x)
+# define MAX_BLACKFIN_GPTIMERS 8
+# define TIMER0_GROUP_REG     TIMER_RUN
+#endif
+/*
+ * All others: 3 timers:
+ */
+#define TIMER_GROUP1           0
+#if !defined(MAX_BLACKFIN_GPTIMERS)
+# define MAX_BLACKFIN_GPTIMERS 3
+# define TIMER0_GROUP_REG      TIMER_ENABLE
+#endif
+
+#define BLACKFIN_GPTIMER_IDMASK ((1UL << MAX_BLACKFIN_GPTIMERS) - 1)
+#define BFIN_TIMER_OCTET(x) ((x) >> 3)
+
+/* used in masks for timer_enable() and timer_disable() */
+#define TIMER0bit  0x0001  /*  0001b */
+#define TIMER1bit  0x0002  /*  0010b */
+#define TIMER2bit  0x0004  /*  0100b */
+#define TIMER3bit  0x0008
+#define TIMER4bit  0x0010
+#define TIMER5bit  0x0020
+#define TIMER6bit  0x0040
+#define TIMER7bit  0x0080
+#define TIMER8bit  0x0100
+#define TIMER9bit  0x0200
+#define TIMER10bit 0x0400
+#define TIMER11bit 0x0800
+
+#define TIMER0_id   0
+#define TIMER1_id   1
+#define TIMER2_id   2
+#define TIMER3_id   3
+#define TIMER4_id   4
+#define TIMER5_id   5
+#define TIMER6_id   6
+#define TIMER7_id   7
+#define TIMER8_id   8
+#define TIMER9_id   9
+#define TIMER10_id 10
+#define TIMER11_id 11
+
+/* associated timers for ppi framesync: */
+
+#if defined(CONFIG_BF561)
+# define FS0_1_TIMER_ID   TIMER8_id
+# define FS0_2_TIMER_ID   TIMER9_id
+# define FS1_1_TIMER_ID   TIMER10_id
+# define FS1_2_TIMER_ID   TIMER11_id
+# define FS0_1_TIMER_BIT  TIMER8bit
+# define FS0_2_TIMER_BIT  TIMER9bit
+# define FS1_1_TIMER_BIT  TIMER10bit
+# define FS1_2_TIMER_BIT  TIMER11bit
+# undef FS1_TIMER_ID
+# undef FS2_TIMER_ID
+# undef FS1_TIMER_BIT
+# undef FS2_TIMER_BIT
+#else
+# define FS1_TIMER_ID  TIMER0_id
+# define FS2_TIMER_ID  TIMER1_id
+# define FS1_TIMER_BIT TIMER0bit
+# define FS2_TIMER_BIT TIMER1bit
+#endif
+
+#ifdef CONFIG_BF60x
+/*
+ * Timer Configuration Register Bits
+ */
+#define TIMER_EMU_RUN       0x8000
+#define TIMER_BPER_EN       0x4000
+#define TIMER_BWID_EN       0x2000
+#define TIMER_BDLY_EN       0x1000
+#define TIMER_OUT_DIS       0x0800
+#define TIMER_TIN_SEL       0x0400
+#define TIMER_CLK_SEL       0x0300
+#define TIMER_CLK_SCLK      0x0000
+#define TIMER_CLK_ALT_CLK0  0x0100
+#define TIMER_CLK_ALT_CLK1  0x0300
+#define TIMER_PULSE_HI 	    0x0080
+#define TIMER_SLAVE_TRIG    0x0040
+#define TIMER_IRQ_MODE      0x0030
+#define TIMER_IRQ_ACT_EDGE  0x0000
+#define TIMER_IRQ_DLY       0x0010
+#define TIMER_IRQ_WID_DLY   0x0020
+#define TIMER_IRQ_PER       0x0030
+#define TIMER_MODE          0x000f
+#define TIMER_MODE_WDOG_P   0x0008
+#define TIMER_MODE_WDOG_W   0x0009
+#define TIMER_MODE_PWM_CONT 0x000c
+#define TIMER_MODE_PWM      0x000d
+#define TIMER_MODE_WDTH     0x000a
+#define TIMER_MODE_WDTH_D   0x000b
+#define TIMER_MODE_EXT_CLK  0x000e
+#define TIMER_MODE_PININT   0x000f
+
+/*
+ * Timer Status Register Bits
+ */
+#define TIMER_STATUS_TIMIL0  0x0001
+#define TIMER_STATUS_TIMIL1  0x0002
+#define TIMER_STATUS_TIMIL2  0x0004
+#define TIMER_STATUS_TIMIL3  0x0008
+#define TIMER_STATUS_TIMIL4  0x0010
+#define TIMER_STATUS_TIMIL5  0x0020
+#define TIMER_STATUS_TIMIL6  0x0040
+#define TIMER_STATUS_TIMIL7  0x0080
+
+#define TIMER_STATUS_TOVF0   0x0001	/* timer 0 overflow error */
+#define TIMER_STATUS_TOVF1   0x0002
+#define TIMER_STATUS_TOVF2   0x0004
+#define TIMER_STATUS_TOVF3   0x0008
+#define TIMER_STATUS_TOVF4   0x0010
+#define TIMER_STATUS_TOVF5   0x0020
+#define TIMER_STATUS_TOVF6   0x0040
+#define TIMER_STATUS_TOVF7   0x0080
+
+/*
+ * Timer Slave Enable Status : write 1 to clear
+ */
+#define TIMER_STATUS_TRUN0  0x0001
+#define TIMER_STATUS_TRUN1  0x0002
+#define TIMER_STATUS_TRUN2  0x0004
+#define TIMER_STATUS_TRUN3  0x0008
+#define TIMER_STATUS_TRUN4  0x0010
+#define TIMER_STATUS_TRUN5  0x0020
+#define TIMER_STATUS_TRUN6  0x0040
+#define TIMER_STATUS_TRUN7  0x0080
+
+#else
+
+/*
+ * Timer Configuration Register Bits
+ */
+#define TIMER_ERR           0xC000
+#define TIMER_ERR_OVFL      0x4000
+#define TIMER_ERR_PROG_PER  0x8000
+#define TIMER_ERR_PROG_PW   0xC000
+#define TIMER_EMU_RUN       0x0200
+#define TIMER_TOGGLE_HI     0x0100
+#define TIMER_CLK_SEL       0x0080
+#define TIMER_OUT_DIS       0x0040
+#define TIMER_TIN_SEL       0x0020
+#define TIMER_IRQ_ENA       0x0010
+#define TIMER_PERIOD_CNT    0x0008
+#define TIMER_PULSE_HI      0x0004
+#define TIMER_MODE          0x0003
+#define TIMER_MODE_PWM      0x0001
+#define TIMER_MODE_WDTH     0x0002
+#define TIMER_MODE_EXT_CLK  0x0003
+
+/*
+ * Timer Status Register Bits
+ */
+#define TIMER_STATUS_TIMIL0  0x0001
+#define TIMER_STATUS_TIMIL1  0x0002
+#define TIMER_STATUS_TIMIL2  0x0004
+#define TIMER_STATUS_TIMIL3  0x00000008
+#define TIMER_STATUS_TIMIL4  0x00010000
+#define TIMER_STATUS_TIMIL5  0x00020000
+#define TIMER_STATUS_TIMIL6  0x00040000
+#define TIMER_STATUS_TIMIL7  0x00080000
+#define TIMER_STATUS_TIMIL8  0x0001
+#define TIMER_STATUS_TIMIL9  0x0002
+#define TIMER_STATUS_TIMIL10 0x0004
+#define TIMER_STATUS_TIMIL11 0x0008
+
+#define TIMER_STATUS_TOVF0   0x0010	/* timer 0 overflow error */
+#define TIMER_STATUS_TOVF1   0x0020
+#define TIMER_STATUS_TOVF2   0x0040
+#define TIMER_STATUS_TOVF3   0x00000080
+#define TIMER_STATUS_TOVF4   0x00100000
+#define TIMER_STATUS_TOVF5   0x00200000
+#define TIMER_STATUS_TOVF6   0x00400000
+#define TIMER_STATUS_TOVF7   0x00800000
+#define TIMER_STATUS_TOVF8   0x0010
+#define TIMER_STATUS_TOVF9   0x0020
+#define TIMER_STATUS_TOVF10  0x0040
+#define TIMER_STATUS_TOVF11  0x0080
+
+/*
+ * Timer Slave Enable Status : write 1 to clear
+ */
+#define TIMER_STATUS_TRUN0  0x1000
+#define TIMER_STATUS_TRUN1  0x2000
+#define TIMER_STATUS_TRUN2  0x4000
+#define TIMER_STATUS_TRUN3  0x00008000
+#define TIMER_STATUS_TRUN4  0x10000000
+#define TIMER_STATUS_TRUN5  0x20000000
+#define TIMER_STATUS_TRUN6  0x40000000
+#define TIMER_STATUS_TRUN7  0x80000000
+#define TIMER_STATUS_TRUN   0xF000F000
+#define TIMER_STATUS_TRUN8  0x1000
+#define TIMER_STATUS_TRUN9  0x2000
+#define TIMER_STATUS_TRUN10 0x4000
+#define TIMER_STATUS_TRUN11 0x8000
+
+#endif
+
+/* The actual gptimer API */
+
+void     set_gptimer_pwidth(unsigned int timer_id, uint32_t width);
+uint32_t get_gptimer_pwidth(unsigned int timer_id);
+void     set_gptimer_period(unsigned int timer_id, uint32_t period);
+uint32_t get_gptimer_period(unsigned int timer_id);
+#ifdef CONFIG_BF60x
+void     set_gptimer_delay(unsigned int timer_id, uint32_t delay);
+uint32_t get_gptimer_delay(unsigned int timer_id);
+#endif
+uint32_t get_gptimer_count(unsigned int timer_id);
+int      get_gptimer_intr(unsigned int timer_id);
+void     clear_gptimer_intr(unsigned int timer_id);
+int      get_gptimer_over(unsigned int timer_id);
+void     clear_gptimer_over(unsigned int timer_id);
+void     set_gptimer_config(unsigned int timer_id, uint16_t config);
+uint16_t get_gptimer_config(unsigned int timer_id);
+int      get_gptimer_run(unsigned int timer_id);
+void     set_gptimer_pulse_hi(unsigned int timer_id);
+void     clear_gptimer_pulse_hi(unsigned int timer_id);
+void     enable_gptimers(uint16_t mask);
+void     disable_gptimers(uint16_t mask);
+void     disable_gptimers_sync(uint16_t mask);
+uint16_t get_enabled_gptimers(void);
+uint32_t get_gptimer_status(unsigned int group);
+void     set_gptimer_status(unsigned int group, uint32_t value);
+
+static inline void enable_gptimer(unsigned int timer_id)
+{
+	enable_gptimers(1 << timer_id);
+}
+
+static inline void disable_gptimer(unsigned int timer_id)
+{
+	disable_gptimers(1 << timer_id);
+}
+
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+
+/*
+ * bfin timer registers layout
+ */
+struct bfin_gptimer_regs {
+	__BFP(config);
+	u32 counter;
+	u32 period;
+	u32 width;
+#ifdef CONFIG_BF60x
+	u32 delay;
+#endif
+};
+
+/*
+ * bfin group timer registers layout
+ */
+#ifndef CONFIG_BF60x
+struct bfin_gptimer_group_regs {
+	__BFP(enable);
+	__BFP(disable);
+	u32 status;
+};
+#else
+struct bfin_gptimer_group_regs {
+	__BFP(run);
+	__BFP(enable);
+	__BFP(disable);
+	__BFP(stop_cfg);
+	__BFP(stop_cfg_set);
+	__BFP(stop_cfg_clr);
+	__BFP(data_imsk);
+	__BFP(stat_imsk);
+	__BFP(tr_msk);
+	__BFP(tr_ie);
+	__BFP(data_ilat);
+	__BFP(stat_ilat);
+	__BFP(err_status);
+	__BFP(bcast_per);
+	__BFP(bcast_wid);
+	__BFP(bcast_dly);
+
+};
+#endif
+
+#undef __BFP
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/hardirq.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/hardirq.h
new file mode 100644
index 0000000..58b54a6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/hardirq.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_HARDIRQ_H
+#define __BFIN_HARDIRQ_H
+
+#define __ARCH_IRQ_EXIT_IRQS_DISABLED	1
+
+extern void ack_bad_irq(unsigned int irq);
+#define ack_bad_irq ack_bad_irq
+
+#include <asm-generic/hardirq.h>
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/io.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/io.h
new file mode 100644
index 0000000..6abebe8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/io.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BFIN_IO_H
+#define _BFIN_IO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <asm/def_LPBlackfin.h>
+
+#define __raw_readb bfin_read8
+#define __raw_readw bfin_read16
+#define __raw_readl bfin_read32
+#define __raw_writeb(val, addr) bfin_write8(addr, val)
+#define __raw_writew(val, addr) bfin_write16(addr, val)
+#define __raw_writel(val, addr) bfin_write32(addr, val)
+
+extern void outsb(unsigned long port, const void *addr, unsigned long count);
+extern void outsw(unsigned long port, const void *addr, unsigned long count);
+extern void outsw_8(unsigned long port, const void *addr, unsigned long count);
+extern void outsl(unsigned long port, const void *addr, unsigned long count);
+#define outsb outsb
+#define outsw outsw
+#define outsl outsl
+
+extern void insb(unsigned long port, void *addr, unsigned long count);
+extern void insw(unsigned long port, void *addr, unsigned long count);
+extern void insw_8(unsigned long port, void *addr, unsigned long count);
+extern void insl(unsigned long port, void *addr, unsigned long count);
+extern void insl_16(unsigned long port, void *addr, unsigned long count);
+#define insb insb
+#define insw insw
+#define insl insl
+
+/**
+ * I/O write barrier
+ *
+ * Ensure ordering of I/O space writes. This will make sure that writes
+ * following the barrier will arrive after all previous writes.
+ */
+#define mmiowb() do { SSYNC(); wmb(); } while (0)
+
+#include <asm-generic/io.h>
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/ipipe.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/ipipe.h
new file mode 100644
index 0000000..fe1160f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/ipipe.h
@@ -0,0 +1,209 @@
+/*   -*- linux-c -*-
+ *   include/asm-blackfin/ipipe.h
+ *
+ *   Copyright (C) 2002-2007 Philippe Gerum.
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139,
+ *   USA; either version 2 of the License, or (at your option) any later
+ *   version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __ASM_BLACKFIN_IPIPE_H
+#define __ASM_BLACKFIN_IPIPE_H
+
+#ifdef CONFIG_IPIPE
+
+#include <linux/cpumask.h>
+#include <linux/list.h>
+#include <linux/threads.h>
+#include <linux/irq.h>
+#include <linux/ipipe_percpu.h>
+#include <asm/ptrace.h>
+#include <asm/irq.h>
+#include <asm/bitops.h>
+#include <linux/atomic.h>
+#include <asm/traps.h>
+#include <asm/bitsperlong.h>
+
+#define IPIPE_ARCH_STRING     "1.16-01"
+#define IPIPE_MAJOR_NUMBER    1
+#define IPIPE_MINOR_NUMBER    16
+#define IPIPE_PATCH_NUMBER    1
+
+#ifdef CONFIG_SMP
+#error "I-pipe/blackfin: SMP not implemented"
+#else /* !CONFIG_SMP */
+#define ipipe_processor_id()	0
+#endif	/* CONFIG_SMP */
+
+#define prepare_arch_switch(next)		\
+do {						\
+	ipipe_schedule_notify(current, next);	\
+	hard_local_irq_disable();			\
+} while (0)
+
+#define task_hijacked(p)						\
+	({								\
+		int __x__ = __ipipe_root_domain_p;			\
+		if (__x__)						\
+			hard_local_irq_enable();			\
+		!__x__;							\
+	})
+
+struct ipipe_domain;
+
+struct ipipe_sysinfo {
+	int sys_nr_cpus;	/* Number of CPUs on board */
+	int sys_hrtimer_irq;	/* hrtimer device IRQ */
+	u64 sys_hrtimer_freq;	/* hrtimer device frequency */
+	u64 sys_hrclock_freq;	/* hrclock device frequency */
+	u64 sys_cpu_freq;	/* CPU frequency (Hz) */
+};
+
+#define ipipe_read_tsc(t)					\
+	({							\
+	unsigned long __cy2;					\
+	__asm__ __volatile__ ("1: %0 = CYCLES2\n"		\
+				"%1 = CYCLES\n"			\
+				"%2 = CYCLES2\n"		\
+				"CC = %2 == %0\n"		\
+				"if ! CC jump 1b\n"		\
+				: "=d,a" (((unsigned long *)&t)[1]),	\
+				  "=d,a" (((unsigned long *)&t)[0]),	\
+				  "=d,a" (__cy2)				\
+				: /*no input*/ : "CC");			\
+	t;								\
+	})
+
+#define ipipe_cpu_freq()	__ipipe_core_clock
+#define ipipe_tsc2ns(_t)	(((unsigned long)(_t)) * __ipipe_freq_scale)
+#define ipipe_tsc2us(_t)	(ipipe_tsc2ns(_t) / 1000 + 1)
+
+/* Private interface -- Internal use only */
+
+#define __ipipe_check_platform()	do { } while (0)
+
+#define __ipipe_init_platform()		do { } while (0)
+
+extern atomic_t __ipipe_irq_lvdepth[IVG15 + 1];
+
+extern unsigned long __ipipe_irq_lvmask;
+
+extern struct ipipe_domain ipipe_root;
+
+/* enable/disable_irqdesc _must_ be used in pairs. */
+
+void __ipipe_enable_irqdesc(struct ipipe_domain *ipd,
+			    unsigned irq);
+
+void __ipipe_disable_irqdesc(struct ipipe_domain *ipd,
+			     unsigned irq);
+
+#define __ipipe_enable_irq(irq)						\
+	do {								\
+		struct irq_desc *desc = irq_to_desc(irq);		\
+		struct irq_chip *chip = get_irq_desc_chip(desc);	\
+		chip->irq_unmask(&desc->irq_data);			\
+	} while (0)
+
+#define __ipipe_disable_irq(irq)					\
+	do {								\
+		struct irq_desc *desc = irq_to_desc(irq);		\
+		struct irq_chip *chip = get_irq_desc_chip(desc);	\
+		chip->irq_mask(&desc->irq_data);			\
+	} while (0)
+
+static inline int __ipipe_check_tickdev(const char *devname)
+{
+	return 1;
+}
+
+void __ipipe_enable_pipeline(void);
+
+#define __ipipe_hook_critical_ipi(ipd) do { } while (0)
+
+void ___ipipe_sync_pipeline(void);
+
+void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);
+
+int __ipipe_get_irq_priority(unsigned int irq);
+
+void __ipipe_serial_debug(const char *fmt, ...);
+
+asmlinkage void __ipipe_call_irqtail(unsigned long addr);
+
+DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
+
+extern unsigned long __ipipe_core_clock;
+
+extern unsigned long __ipipe_freq_scale;
+
+extern unsigned long __ipipe_irq_tail_hook;
+
+static inline unsigned long __ipipe_ffnz(unsigned long ul)
+{
+	return ffs(ul) - 1;
+}
+
+#define __ipipe_do_root_xirq(ipd, irq)					\
+	((ipd)->irqs[irq].handler(irq, raw_cpu_ptr(&__ipipe_tick_regs)))
+
+#define __ipipe_run_irqtail(irq)  /* Must be a macro */			\
+	do {								\
+		unsigned long __pending;				\
+		CSYNC();						\
+		__pending = bfin_read_IPEND();				\
+		if (__pending & 0x8000) {				\
+			__pending &= ~0x8010;				\
+			if (__pending && (__pending & (__pending - 1)) == 0) \
+				__ipipe_call_irqtail(__ipipe_irq_tail_hook); \
+		}							\
+	} while (0)
+
+#define __ipipe_syscall_watched_p(p, sc)	\
+	(ipipe_notifier_enabled_p(p) || (unsigned long)sc >= NR_syscalls)
+
+#ifdef CONFIG_BF561
+#define bfin_write_TIMER_DISABLE(val)	bfin_write_TMRS8_DISABLE(val)
+#define bfin_write_TIMER_ENABLE(val)	bfin_write_TMRS8_ENABLE(val)
+#define bfin_write_TIMER_STATUS(val)	bfin_write_TMRS8_STATUS(val)
+#define bfin_read_TIMER_STATUS()	bfin_read_TMRS8_STATUS()
+#elif defined(CONFIG_BF54x)
+#define bfin_write_TIMER_DISABLE(val)	bfin_write_TIMER_DISABLE0(val)
+#define bfin_write_TIMER_ENABLE(val)	bfin_write_TIMER_ENABLE0(val)
+#define bfin_write_TIMER_STATUS(val)	bfin_write_TIMER_STATUS0(val)
+#define bfin_read_TIMER_STATUS(val)	bfin_read_TIMER_STATUS0(val)
+#endif
+
+#define __ipipe_root_tick_p(regs)	((regs->ipend & 0x10) != 0)
+
+#else /* !CONFIG_IPIPE */
+
+#define task_hijacked(p)		0
+#define ipipe_trap_notify(t, r)  	0
+#define __ipipe_root_tick_p(regs)	1
+
+#endif /* !CONFIG_IPIPE */
+
+#ifdef CONFIG_TICKSOURCE_CORETMR
+#define IRQ_SYSTMR		IRQ_CORETMR
+#define IRQ_PRIOTMR		IRQ_CORETMR
+#else
+#define IRQ_SYSTMR		IRQ_TIMER0
+#define IRQ_PRIOTMR		CONFIG_IRQ_TIMER0
+#endif
+
+#define ipipe_update_tick_evtdev(evtdev)	do { } while (0)
+
+#endif	/* !__ASM_BLACKFIN_IPIPE_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/ipipe_base.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/ipipe_base.h
new file mode 100644
index 0000000..84a4ffd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/ipipe_base.h
@@ -0,0 +1,75 @@
+/*   -*- linux-c -*-
+ *   include/asm-blackfin/ipipe_base.h
+ *
+ *   Copyright (C) 2007 Philippe Gerum.
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139,
+ *   USA; either version 2 of the License, or (at your option) any later
+ *   version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __ASM_BLACKFIN_IPIPE_BASE_H
+#define __ASM_BLACKFIN_IPIPE_BASE_H
+
+#ifdef CONFIG_IPIPE
+
+#include <asm/bitsperlong.h>
+#include <mach/irq.h>
+
+#define IPIPE_NR_XIRQS		NR_IRQS
+
+/* Blackfin-specific, per-cpu pipeline status */
+#define IPIPE_SYNCDEFER_FLAG	15
+#define IPIPE_SYNCDEFER_MASK	(1L << IPIPE_SYNCDEFER_MASK)
+
+ /* Blackfin traps -- i.e. exception vector numbers */
+#define IPIPE_NR_FAULTS		52 /* We leave a gap after VEC_ILL_RES. */
+/* Pseudo-vectors used for kernel events */
+#define IPIPE_FIRST_EVENT	IPIPE_NR_FAULTS
+#define IPIPE_EVENT_SYSCALL	(IPIPE_FIRST_EVENT)
+#define IPIPE_EVENT_SCHEDULE	(IPIPE_FIRST_EVENT + 1)
+#define IPIPE_EVENT_SIGWAKE	(IPIPE_FIRST_EVENT + 2)
+#define IPIPE_EVENT_SETSCHED	(IPIPE_FIRST_EVENT + 3)
+#define IPIPE_EVENT_INIT	(IPIPE_FIRST_EVENT + 4)
+#define IPIPE_EVENT_EXIT	(IPIPE_FIRST_EVENT + 5)
+#define IPIPE_EVENT_CLEANUP	(IPIPE_FIRST_EVENT + 6)
+#define IPIPE_EVENT_RETURN	(IPIPE_FIRST_EVENT + 7)
+#define IPIPE_LAST_EVENT	IPIPE_EVENT_RETURN
+#define IPIPE_NR_EVENTS		(IPIPE_LAST_EVENT + 1)
+
+#define IPIPE_TIMER_IRQ		IRQ_CORETMR
+
+#define __IPIPE_FEATURE_SYSINFO_V2	1
+
+#ifndef __ASSEMBLY__
+
+extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
+
+void __ipipe_stall_root(void);
+
+unsigned long __ipipe_test_and_stall_root(void);
+
+unsigned long __ipipe_test_root(void);
+
+void __ipipe_lock_root(void);
+
+void __ipipe_unlock_root(void);
+
+#endif /* !__ASSEMBLY__ */
+
+#define __IPIPE_FEATURE_SYSINFO_V2	1
+
+#endif /* CONFIG_IPIPE */
+
+#endif /* !__ASM_BLACKFIN_IPIPE_BASE_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/irq.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/irq.h
new file mode 100644
index 0000000..89de539
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/irq.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2003 HuTao
+ *                2002 Arcturus Networks Inc. (www.arcturusnetworks.com
+ *                       Ted Ma <mated@sympatico.ca>
+ *
+ * Licensed under the GPL-2
+ */
+
+#ifndef _BFIN_IRQ_H_
+#define _BFIN_IRQ_H_
+
+#include <linux/irqflags.h>
+
+/* IRQs that may be used by external irq_chip controllers */
+#define NR_SPARE_IRQS	32
+
+#include <mach/anomaly.h>
+
+/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
+#include <mach/irq.h>
+
+#if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE)
+# define NOP_PAD_ANOMALY_05000244 "nop; nop;"
+#else
+# define NOP_PAD_ANOMALY_05000244
+#endif
+
+#define idle_with_irq_disabled() \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000244 \
+		".align 8;" \
+		"sti %0;" \
+		"idle;" \
+		: \
+		: "d" (bfin_irq_flags) \
+	)
+
+#include <asm-generic/irq.h>
+
+#endif				/* _BFIN_IRQ_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/irq_handler.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/irq_handler.h
new file mode 100644
index 0000000..d2f90c7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/irq_handler.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _IRQ_HANDLER_H
+#define _IRQ_HANDLER_H
+
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <mach/irq.h>
+
+/* init functions only */
+extern int init_arch_irq(void);
+extern void init_exception_vectors(void);
+extern void program_IAR(void);
+#ifdef init_mach_irq
+extern void init_mach_irq(void);
+#else
+# define init_mach_irq()
+#endif
+
+/* BASE LEVEL interrupt handler routines */
+asmlinkage void evt_exception(void);
+asmlinkage void trap(void);
+asmlinkage void evt_ivhw(void);
+asmlinkage void evt_timer(void);
+asmlinkage void evt_nmi(void);
+asmlinkage void evt_evt7(void);
+asmlinkage void evt_evt8(void);
+asmlinkage void evt_evt9(void);
+asmlinkage void evt_evt10(void);
+asmlinkage void evt_evt11(void);
+asmlinkage void evt_evt12(void);
+asmlinkage void evt_evt13(void);
+asmlinkage void evt_evt14(void);
+asmlinkage void evt_soft_int1(void);
+asmlinkage void evt_system_call(void);
+asmlinkage void init_exception_buff(void);
+asmlinkage void trap_c(struct pt_regs *fp);
+asmlinkage void ex_replaceable(void);
+asmlinkage void early_trap(void);
+
+extern void *ex_table[];
+extern void return_from_exception(void);
+
+extern int bfin_request_exception(unsigned int exception, void (*handler)(void));
+extern int bfin_free_exception(unsigned int exception, void (*handler)(void));
+
+extern asmlinkage void lower_to_irq14(void);
+extern asmlinkage void bfin_return_from_exception(void);
+extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
+extern int bfin_internal_set_wake(unsigned int irq, unsigned int state);
+
+struct irq_data;
+extern void bfin_handle_irq(unsigned irq);
+extern void bfin_ack_noop(struct irq_data *);
+extern void bfin_internal_mask_irq(unsigned int irq);
+extern void bfin_internal_unmask_irq(unsigned int irq);
+
+struct irq_desc;
+extern void bfin_demux_mac_status_irq(struct irq_desc *);
+extern void bfin_demux_gpio_irq(struct irq_desc *);
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/irqflags.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/irqflags.h
new file mode 100644
index 0000000..07aff23
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/irqflags.h
@@ -0,0 +1,289 @@
+/*
+ * interface to Blackfin CEC
+ *
+ * Copyright 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_IRQFLAGS_H__
+#define __ASM_BFIN_IRQFLAGS_H__
+
+#include <mach/blackfin.h>
+
+#ifdef CONFIG_SMP
+# include <asm/pda.h>
+# include <asm/processor.h>
+# define bfin_irq_flags cpu_pda[blackfin_core_id()].imask
+#else
+extern unsigned long bfin_irq_flags;
+#endif
+
+static inline notrace void bfin_sti(unsigned long flags)
+{
+	asm volatile("sti %0;" : : "d" (flags));
+}
+
+static inline notrace unsigned long bfin_cli(void)
+{
+	unsigned long flags;
+	asm volatile("cli %0;" : "=d" (flags));
+	return flags;
+}
+
+#ifdef CONFIG_DEBUG_HWERR
+# define bfin_no_irqs 0x3f
+#else
+# define bfin_no_irqs 0x1f
+#endif
+
+/*****************************************************************************/
+/*
+ * Hard, untraced CPU interrupt flag manipulation and access.
+ */
+static inline notrace void __hard_local_irq_disable(void)
+{
+	bfin_cli();
+}
+
+static inline notrace void __hard_local_irq_enable(void)
+{
+	bfin_sti(bfin_irq_flags);
+}
+
+static inline notrace unsigned long hard_local_save_flags(void)
+{
+	return bfin_read_IMASK();
+}
+
+static inline notrace unsigned long __hard_local_irq_save(void)
+{
+	unsigned long flags;
+	flags = bfin_cli();
+#ifdef CONFIG_DEBUG_HWERR
+	bfin_sti(0x3f);
+#endif
+	return flags;
+}
+
+static inline notrace int hard_irqs_disabled_flags(unsigned long flags)
+{
+#ifdef CONFIG_BF60x
+	return (flags & IMASK_IVG11) == 0;
+#else
+	return (flags & ~0x3f) == 0;
+#endif
+}
+
+static inline notrace int hard_irqs_disabled(void)
+{
+	unsigned long flags = hard_local_save_flags();
+	return hard_irqs_disabled_flags(flags);
+}
+
+static inline notrace void __hard_local_irq_restore(unsigned long flags)
+{
+	if (!hard_irqs_disabled_flags(flags))
+		__hard_local_irq_enable();
+}
+
+/*****************************************************************************/
+/*
+ * Interrupt pipe handling.
+ */
+#ifdef CONFIG_IPIPE
+
+#include <linux/compiler.h>
+#include <linux/ipipe_trace.h>
+/*
+ * Way too many inter-deps between low-level headers in this port, so
+ * we redeclare the required bits we cannot pick from
+ * <asm/ipipe_base.h> to prevent circular dependencies.
+ */
+void __ipipe_stall_root(void);
+void __ipipe_unstall_root(void);
+unsigned long __ipipe_test_root(void);
+unsigned long __ipipe_test_and_stall_root(void);
+void __ipipe_restore_root(unsigned long flags);
+
+#ifdef CONFIG_IPIPE_DEBUG_CONTEXT
+struct ipipe_domain;
+extern struct ipipe_domain ipipe_root;
+void ipipe_check_context(struct ipipe_domain *ipd);
+#define __check_irqop_context(ipd)  ipipe_check_context(&ipipe_root)
+#else /* !CONFIG_IPIPE_DEBUG_CONTEXT */
+#define __check_irqop_context(ipd)  do { } while (0)
+#endif /* !CONFIG_IPIPE_DEBUG_CONTEXT */
+
+/*
+ * Interrupt pipe interface to linux/irqflags.h.
+ */
+static inline notrace void arch_local_irq_disable(void)
+{
+	__check_irqop_context();
+	__ipipe_stall_root();
+	barrier();
+}
+
+static inline notrace void arch_local_irq_enable(void)
+{
+	barrier();
+	__check_irqop_context();
+	__ipipe_unstall_root();
+}
+
+static inline notrace unsigned long arch_local_save_flags(void)
+{
+	return __ipipe_test_root() ? bfin_no_irqs : bfin_irq_flags;
+}
+
+static inline notrace int arch_irqs_disabled_flags(unsigned long flags)
+{
+	return flags == bfin_no_irqs;
+}
+
+static inline notrace unsigned long arch_local_irq_save(void)
+{
+	unsigned long flags;
+
+	__check_irqop_context();
+	flags = __ipipe_test_and_stall_root() ? bfin_no_irqs : bfin_irq_flags;
+	barrier();
+
+	return flags;
+}
+
+static inline notrace void arch_local_irq_restore(unsigned long flags)
+{
+	__check_irqop_context();
+	__ipipe_restore_root(flags == bfin_no_irqs);
+}
+
+static inline notrace unsigned long arch_mangle_irq_bits(int virt, unsigned long real)
+{
+	/*
+	 * Merge virtual and real interrupt mask bits into a single
+	 * 32bit word.
+	 */
+	return (real & ~(1 << 31)) | ((virt != 0) << 31);
+}
+
+static inline notrace int arch_demangle_irq_bits(unsigned long *x)
+{
+	int virt = (*x & (1 << 31)) != 0;
+	*x &= ~(1L << 31);
+	return virt;
+}
+
+/*
+ * Interface to various arch routines that may be traced.
+ */
+#ifdef CONFIG_IPIPE_TRACE_IRQSOFF
+static inline notrace void hard_local_irq_disable(void)
+{
+	if (!hard_irqs_disabled()) {
+		__hard_local_irq_disable();
+		ipipe_trace_begin(0x80000000);
+	}
+}
+
+static inline notrace void hard_local_irq_enable(void)
+{
+	if (hard_irqs_disabled()) {
+		ipipe_trace_end(0x80000000);
+		__hard_local_irq_enable();
+	}
+}
+
+static inline notrace unsigned long hard_local_irq_save(void)
+{
+	unsigned long flags = hard_local_save_flags();
+	if (!hard_irqs_disabled_flags(flags)) {
+		__hard_local_irq_disable();
+		ipipe_trace_begin(0x80000001);
+	}
+	return flags;
+}
+
+static inline notrace void hard_local_irq_restore(unsigned long flags)
+{
+	if (!hard_irqs_disabled_flags(flags)) {
+		ipipe_trace_end(0x80000001);
+		__hard_local_irq_enable();
+	}
+}
+
+#else /* !CONFIG_IPIPE_TRACE_IRQSOFF */
+# define hard_local_irq_disable()	__hard_local_irq_disable()
+# define hard_local_irq_enable()	__hard_local_irq_enable()
+# define hard_local_irq_save()		__hard_local_irq_save()
+# define hard_local_irq_restore(flags)	__hard_local_irq_restore(flags)
+#endif /* !CONFIG_IPIPE_TRACE_IRQSOFF */
+
+#define hard_local_irq_save_cond()		hard_local_irq_save()
+#define hard_local_irq_restore_cond(flags)	hard_local_irq_restore(flags)
+
+#else /* !CONFIG_IPIPE */
+
+/*
+ * Direct interface to linux/irqflags.h.
+ */
+#define arch_local_save_flags()		hard_local_save_flags()
+#define arch_local_irq_save()		__hard_local_irq_save()
+#define arch_local_irq_restore(flags)	__hard_local_irq_restore(flags)
+#define arch_local_irq_enable()		__hard_local_irq_enable()
+#define arch_local_irq_disable()	__hard_local_irq_disable()
+#define arch_irqs_disabled_flags(flags)	hard_irqs_disabled_flags(flags)
+#define arch_irqs_disabled()		hard_irqs_disabled()
+
+/*
+ * Interface to various arch routines that may be traced.
+ */
+#define hard_local_irq_save()		__hard_local_irq_save()
+#define hard_local_irq_restore(flags)	__hard_local_irq_restore(flags)
+#define hard_local_irq_enable()		__hard_local_irq_enable()
+#define hard_local_irq_disable()	__hard_local_irq_disable()
+#define hard_local_irq_save_cond()		hard_local_save_flags()
+#define hard_local_irq_restore_cond(flags)	do { (void)(flags); } while (0)
+
+#endif /* !CONFIG_IPIPE */
+
+#ifdef CONFIG_SMP
+#define hard_local_irq_save_smp()		hard_local_irq_save()
+#define hard_local_irq_restore_smp(flags)	hard_local_irq_restore(flags)
+#else
+#define hard_local_irq_save_smp()		hard_local_save_flags()
+#define hard_local_irq_restore_smp(flags)	do { (void)(flags); } while (0)
+#endif
+
+/*
+ * Remap the arch-neutral IRQ state manipulation macros to the
+ * blackfin-specific hard_local_irq_* API.
+ */
+#define local_irq_save_hw(flags)			\
+	do {						\
+		(flags) = hard_local_irq_save();	\
+	} while (0)
+#define local_irq_restore_hw(flags)		\
+	do {					\
+		hard_local_irq_restore(flags);	\
+	} while (0)
+#define local_irq_disable_hw()			\
+	do {					\
+		hard_local_irq_disable();	\
+	} while (0)
+#define local_irq_enable_hw()			\
+	do {					\
+		hard_local_irq_enable();	\
+	} while (0)
+#define local_irq_save_hw_notrace(flags)		\
+	do {						\
+		(flags) = __hard_local_irq_save();	\
+	} while (0)
+#define local_irq_restore_hw_notrace(flags)		\
+	do {						\
+		__hard_local_irq_restore(flags);	\
+	} while (0)
+
+#define irqs_disabled_hw()	hard_irqs_disabled()
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/kgdb.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/kgdb.h
new file mode 100644
index 0000000..2703dde
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/kgdb.h
@@ -0,0 +1,169 @@
+/* Blackfin KGDB header
+ *
+ * Copyright 2005-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BLACKFIN_KGDB_H__
+#define __ASM_BLACKFIN_KGDB_H__
+
+#include <linux/ptrace.h>
+
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound buffers.
+ * At least NUMREGBYTES*2 are needed for register packets.
+ * Longer buffer is needed to list all threads.
+ */
+#define BUFMAX 2048
+
+/*
+ * Note that this register image is different from
+ * the register image that Linux produces at interrupt time.
+ *
+ * Linux's register image is defined by struct pt_regs in ptrace.h.
+ */
+enum regnames {
+  /* Core Registers */
+  BFIN_R0 = 0,
+  BFIN_R1,
+  BFIN_R2,
+  BFIN_R3,
+  BFIN_R4,
+  BFIN_R5,
+  BFIN_R6,
+  BFIN_R7,
+  BFIN_P0,
+  BFIN_P1,
+  BFIN_P2,
+  BFIN_P3,
+  BFIN_P4,
+  BFIN_P5,
+  BFIN_SP,
+  BFIN_FP,
+  BFIN_I0,
+  BFIN_I1,
+  BFIN_I2,
+  BFIN_I3,
+  BFIN_M0,
+  BFIN_M1,
+  BFIN_M2,
+  BFIN_M3,
+  BFIN_B0,
+  BFIN_B1,
+  BFIN_B2,
+  BFIN_B3,
+  BFIN_L0,
+  BFIN_L1,
+  BFIN_L2,
+  BFIN_L3,
+  BFIN_A0_DOT_X,
+  BFIN_A0_DOT_W,
+  BFIN_A1_DOT_X,
+  BFIN_A1_DOT_W,
+  BFIN_ASTAT,
+  BFIN_RETS,
+  BFIN_LC0,
+  BFIN_LT0,
+  BFIN_LB0,
+  BFIN_LC1,
+  BFIN_LT1,
+  BFIN_LB1,
+  BFIN_CYCLES,
+  BFIN_CYCLES2,
+  BFIN_USP,
+  BFIN_SEQSTAT,
+  BFIN_SYSCFG,
+  BFIN_RETI,
+  BFIN_RETX,
+  BFIN_RETN,
+  BFIN_RETE,
+
+  /* Pseudo Registers */
+  BFIN_PC,
+  BFIN_CC,
+  BFIN_EXTRA1,		/* Address of .text section.  */
+  BFIN_EXTRA2,		/* Address of .data section.  */
+  BFIN_EXTRA3,		/* Address of .bss section.  */
+  BFIN_FDPIC_EXEC,
+  BFIN_FDPIC_INTERP,
+
+  /* MMRs */
+  BFIN_IPEND,
+
+  /* LAST ENTRY SHOULD NOT BE CHANGED.  */
+  BFIN_NUM_REGS		/* The number of all registers.  */
+};
+
+/* Number of bytes of registers.  */
+#define NUMREGBYTES BFIN_NUM_REGS*4
+
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm("EXCPT 2;");
+}
+#define BREAK_INSTR_SIZE	2
+#ifdef CONFIG_SMP
+# define CACHE_FLUSH_IS_SAFE	0
+#else
+# define CACHE_FLUSH_IS_SAFE	1
+#endif
+#define GDB_ADJUSTS_BREAK_OFFSET
+#define GDB_SKIP_HW_WATCH_TEST
+#define HW_INST_WATCHPOINT_NUM	6
+#define HW_WATCHPOINT_NUM	8
+#define TYPE_INST_WATCHPOINT	0
+#define TYPE_DATA_WATCHPOINT	1
+
+/* Instruction watchpoint address control register bits mask */
+#define WPPWR		0x1
+#define WPIREN01	0x2
+#define WPIRINV01	0x4
+#define WPIAEN0		0x8
+#define WPIAEN1		0x10
+#define WPICNTEN0	0x20
+#define WPICNTEN1	0x40
+#define EMUSW0		0x80
+#define EMUSW1		0x100
+#define WPIREN23	0x200
+#define WPIRINV23	0x400
+#define WPIAEN2		0x800
+#define WPIAEN3		0x1000
+#define WPICNTEN2	0x2000
+#define WPICNTEN3	0x4000
+#define EMUSW2		0x8000
+#define EMUSW3		0x10000
+#define WPIREN45	0x20000
+#define WPIRINV45	0x40000
+#define WPIAEN4		0x80000
+#define WPIAEN5		0x100000
+#define WPICNTEN4	0x200000
+#define WPICNTEN5	0x400000
+#define EMUSW4		0x800000
+#define EMUSW5		0x1000000
+#define WPAND		0x2000000
+
+/* Data watchpoint address control register bits mask */
+#define WPDREN01	0x1
+#define WPDRINV01	0x2
+#define WPDAEN0		0x4
+#define WPDAEN1		0x8
+#define WPDCNTEN0	0x10
+#define WPDCNTEN1	0x20
+
+#define WPDSRC0		0xc0
+#define WPDACC0_OFFSET	8
+#define WPDSRC1		0xc00
+#define WPDACC1_OFFSET	12
+
+/* Watchpoint status register bits mask */
+#define STATIA0		0x1
+#define STATIA1		0x2
+#define STATIA2		0x4
+#define STATIA3		0x8
+#define STATIA4		0x10
+#define STATIA5		0x20
+#define STATDA0		0x40
+#define STATDA1		0x80
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/l1layout.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/l1layout.h
new file mode 100644
index 0000000..c87e686
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/l1layout.h
@@ -0,0 +1,37 @@
+/*
+ * Defines a layout of L1 scratchpad memory that userspace can rely on.
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _L1LAYOUT_H_
+#define _L1LAYOUT_H_
+
+#include <asm/blackfin.h>
+
+#ifndef CONFIG_SMP
+#ifndef __ASSEMBLY__
+
+/* Data that is "mapped" into the process VM at the start of the L1 scratch
+   memory, so that each process can access it at a fixed address.  Used for
+   stack checking.  */
+struct l1_scratch_task_info
+{
+	/* Points to the start of the stack.  */
+	void *stack_start;
+	/* Not updated by the kernel; a user process can modify this to
+	   keep track of the lowest address of the stack pointer during its
+	   runtime.  */
+	void *lowest_sp;
+};
+
+/* A pointer to the structure in memory.  */
+#define L1_SCRATCH_TASK_INFO ((struct l1_scratch_task_info *)\
+						get_l1_scratch_start())
+
+#endif
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/linkage.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/linkage.h
new file mode 100644
index 0000000..f7d6d47
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/linkage.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .align 4
+#define __ALIGN_STR ".align 4"
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/mem_init.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/mem_init.h
new file mode 100644
index 0000000..c865b33
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/mem_init.h
@@ -0,0 +1,500 @@
+/*
+ * arch/blackfin/include/asm/mem_init.h - reprogram clocks / memory
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __MEM_INIT_H__
+#define __MEM_INIT_H__
+
+#if defined(EBIU_SDGCTL)
+#if defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \
+    defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \
+    defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \
+    defined(CONFIG_MEM_MT48LC32M8A2_75) || \
+    defined(CONFIG_MEM_MT48LC8M32B2B5_7) || \
+    defined(CONFIG_MEM_MT48LC32M16A2TG_75) || \
+    defined(CONFIG_MEM_MT48LC32M8A2_75)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_7
+#define SDRAM_tRAS_num  7
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_6
+#define SDRAM_tRAS_num  6
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_5
+#define SDRAM_tRAS_num  5
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  4
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  4
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_2
+#define SDRAM_tRAS_num  2
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_1
+#define SDRAM_tRAS_num  1
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#endif
+
+/*
+ * The BF526-EZ-Board changed SDRAM chips between revisions,
+ * so we use below timings to accommodate both.
+ */
+#if defined(CONFIG_MEM_MT48H32M16LFCJ_75)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_8
+#define SDRAM_tRAS_num  8
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_7
+#define SDRAM_tRAS_num  7
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_6
+#define SDRAM_tRAS_num  6
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_5
+#define SDRAM_tRAS_num  5
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  4
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  4
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_2
+#define SDRAM_tRAS_num  2
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#endif
+
+#if defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \
+    defined(CONFIG_MEM_MT48LC8M32B2B5_7)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   4096	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if defined(CONFIG_MEM_MT48LC32M8A2_75) || \
+    defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \
+    defined(CONFIG_MEM_MT48LC32M16A2TG_75) || \
+    defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \
+    defined(CONFIG_MEM_MT48LC32M8A2_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if defined(CONFIG_MEM_MT48H32M16LFCJ_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_2
+#endif
+
+
+#ifdef CONFIG_BFIN_KERNEL_CLOCK_MEMINIT_CALC
+/* Equation from section 17 (p17-46) of BF533 HRM */
+#define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
+
+/* Enable SCLK Out */
+#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+#else
+#define mem_SDRRC 	CONFIG_MEM_SDRRC
+#define mem_SDGCTL	CONFIG_MEM_SDGCTL
+#endif
+#endif
+
+
+#if defined(EBIU_DDRCTL0)
+#define MIN_DDR_SCLK(x)	(x*(CONFIG_SCLK_HZ/1000/1000)/1000 + 1)
+#define MAX_DDR_SCLK(x)	(x*(CONFIG_SCLK_HZ/1000/1000)/1000)
+#define DDR_CLK_HZ(x)	(1000*1000*1000/x)
+
+#if defined(CONFIG_MEM_MT46V32M16_6T)
+#define DDR_SIZE	DEVSZ_512
+#define DDR_WIDTH	DEVWD_16
+#define DDR_MAX_tCK	13
+
+#define DDR_tRC		DDR_TRC(MIN_DDR_SCLK(60))
+#define DDR_tRAS	DDR_TRAS(MIN_DDR_SCLK(42))
+#define DDR_tRP		DDR_TRP(MIN_DDR_SCLK(15))
+#define DDR_tRFC	DDR_TRFC(MIN_DDR_SCLK(72))
+#define DDR_tREFI	DDR_TREFI(MAX_DDR_SCLK(7800))
+
+#define DDR_tRCD	DDR_TRCD(MIN_DDR_SCLK(15))
+#define DDR_tWTR	DDR_TWTR(1)
+#define DDR_tMRD	DDR_TMRD(MIN_DDR_SCLK(12))
+#define DDR_tWR		DDR_TWR(MIN_DDR_SCLK(15))
+#endif
+
+#if defined(CONFIG_MEM_MT46V32M16_5B)
+#define DDR_SIZE	DEVSZ_512
+#define DDR_WIDTH	DEVWD_16
+#define DDR_MAX_tCK	13
+
+#define DDR_tRC		DDR_TRC(MIN_DDR_SCLK(55))
+#define DDR_tRAS	DDR_TRAS(MIN_DDR_SCLK(40))
+#define DDR_tRP		DDR_TRP(MIN_DDR_SCLK(15))
+#define DDR_tRFC	DDR_TRFC(MIN_DDR_SCLK(70))
+#define DDR_tREFI	DDR_TREFI(MAX_DDR_SCLK(7800))
+
+#define DDR_tRCD	DDR_TRCD(MIN_DDR_SCLK(15))
+#define DDR_tWTR	DDR_TWTR(2)
+#define DDR_tMRD	DDR_TMRD(MIN_DDR_SCLK(10))
+#define DDR_tWR		DDR_TWR(MIN_DDR_SCLK(15))
+#endif
+
+#if (CONFIG_SCLK_HZ < DDR_CLK_HZ(DDR_MAX_tCK))
+# error "CONFIG_SCLK_HZ is too small (<DDR_CLK_HZ(DDR_MAX_tCK) Hz)."
+#elif(CONFIG_SCLK_HZ <= 133333333)
+# define	DDR_CL		CL_2
+#else
+# error "CONFIG_SCLK_HZ is too large (>133333333 Hz)."
+#endif
+
+#ifdef CONFIG_BFIN_KERNEL_CLOCK_MEMINIT_CALC
+#define mem_DDRCTL0	(DDR_tRP | DDR_tRAS | DDR_tRC | DDR_tRFC | DDR_tREFI)
+#define mem_DDRCTL1	(DDR_DATWIDTH | EXTBANK_1 | DDR_SIZE | DDR_WIDTH | DDR_tWTR \
+			| DDR_tMRD | DDR_tWR | DDR_tRCD)
+#define mem_DDRCTL2	DDR_CL
+#else
+#define mem_DDRCTL0	CONFIG_MEM_DDRCTL0
+#define mem_DDRCTL1	CONFIG_MEM_DDRCTL1
+#define mem_DDRCTL2	CONFIG_MEM_DDRCTL2
+#endif
+#endif
+
+#if defined CONFIG_CLKIN_HALF
+#define CLKIN_HALF       1
+#else
+#define CLKIN_HALF       0
+#endif
+
+#if defined CONFIG_PLL_BYPASS
+#define PLL_BYPASS      1
+#else
+#define PLL_BYPASS       0
+#endif
+
+#ifdef CONFIG_BF60x
+
+/* DMC status bits */
+#define IDLE			0x1
+#define MEMINITDONE		0x4
+#define SRACK			0x8
+#define PDACK			0x10
+#define DPDACK			0x20
+#define DLLCALDONE		0x2000
+#define PENDREF			0xF0000
+#define PHYRDPHASE		0xF00000
+#define PHYRDPHASE_OFFSET	20
+
+/* DMC control bits */
+#define LPDDR			0x2
+#define INIT			0x4
+#define	SRREQ			0x8
+#define PDREQ			0x10
+#define DPDREQ			0x20
+#define PREC			0x40
+#define ADDRMODE		0x100
+#define RDTOWR			0xE00
+#define PPREF			0x1000
+#define DLLCAL			0x2000
+
+/* DMC DLL control bits */
+#define DLLCALRDCNT		0xFF
+#define DATACYC			0xF00
+#define DATACYC_OFFSET		8
+
+/* CGU Divisor bits */
+#define CSEL_OFFSET		0
+#define S0SEL_OFFSET		5
+#define SYSSEL_OFFSET		8
+#define S1SEL_OFFSET		13
+#define DSEL_OFFSET		16
+#define OSEL_OFFSET		22
+#define ALGN			0x20000000
+#define UPDT			0x40000000
+#define LOCK			0x80000000
+
+/* CGU Status bits */
+#define PLLEN			0x1
+#define PLLBP			0x2
+#define PLOCK			0x4
+#define CLKSALGN		0x8
+
+/* CGU Control bits */
+#define MSEL_MASK		0x7F00
+#define DF_MASK			0x1
+
+struct ddr_config {
+	u32 ddr_clk;
+	u32 dmc_ddrctl;
+	u32 dmc_effctl;
+	u32 dmc_ddrcfg;
+	u32 dmc_ddrtr0;
+	u32 dmc_ddrtr1;
+	u32 dmc_ddrtr2;
+	u32 dmc_ddrmr;
+	u32 dmc_ddrmr1;
+};
+
+#if defined(CONFIG_MEM_MT47H64M16)
+static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) = {
+	[0] = {
+		.ddr_clk    = 125,
+		.dmc_ddrctl = 0x00000904,
+		.dmc_effctl = 0x004400C0,
+		.dmc_ddrcfg = 0x00000422,
+		.dmc_ddrtr0 = 0x20705212,
+		.dmc_ddrtr1 = 0x201003CF,
+		.dmc_ddrtr2 = 0x00320107,
+		.dmc_ddrmr  = 0x00000422,
+		.dmc_ddrmr1 = 0x4,
+	},
+	[1] = {
+		.ddr_clk    = 133,
+		.dmc_ddrctl = 0x00000904,
+		.dmc_effctl = 0x004400C0,
+		.dmc_ddrcfg = 0x00000422,
+		.dmc_ddrtr0 = 0x20806313,
+		.dmc_ddrtr1 = 0x2013040D,
+		.dmc_ddrtr2 = 0x00320108,
+		.dmc_ddrmr  = 0x00000632,
+		.dmc_ddrmr1 = 0x4,
+	},
+	[2] = {
+		.ddr_clk    = 150,
+		.dmc_ddrctl = 0x00000904,
+		.dmc_effctl = 0x004400C0,
+		.dmc_ddrcfg = 0x00000422,
+		.dmc_ddrtr0 = 0x20A07323,
+		.dmc_ddrtr1 = 0x20160492,
+		.dmc_ddrtr2 = 0x00320209,
+		.dmc_ddrmr  = 0x00000632,
+		.dmc_ddrmr1 = 0x4,
+	},
+	[3] = {
+		.ddr_clk    = 166,
+		.dmc_ddrctl = 0x00000904,
+		.dmc_effctl = 0x004400C0,
+		.dmc_ddrcfg = 0x00000422,
+		.dmc_ddrtr0 = 0x20A07323,
+		.dmc_ddrtr1 = 0x2016050E,
+		.dmc_ddrtr2 = 0x00320209,
+		.dmc_ddrmr  = 0x00000632,
+		.dmc_ddrmr1 = 0x4,
+	},
+	[4] = {
+		.ddr_clk    = 200,
+		.dmc_ddrctl = 0x00000904,
+		.dmc_effctl = 0x004400C0,
+		.dmc_ddrcfg = 0x00000422,
+		.dmc_ddrtr0 = 0x20a07323,
+		.dmc_ddrtr1 = 0x2016050f,
+		.dmc_ddrtr2 = 0x00320509,
+		.dmc_ddrmr  = 0x00000632,
+		.dmc_ddrmr1 = 0x4,
+	},
+	[5] = {
+		.ddr_clk    = 225,
+		.dmc_ddrctl = 0x00000904,
+		.dmc_effctl = 0x004400C0,
+		.dmc_ddrcfg = 0x00000422,
+		.dmc_ddrtr0 = 0x20E0A424,
+		.dmc_ddrtr1 = 0x302006DB,
+		.dmc_ddrtr2 = 0x0032020D,
+		.dmc_ddrmr  = 0x00000842,
+		.dmc_ddrmr1 = 0x4,
+	},
+	[6] = {
+		.ddr_clk    = 250,
+		.dmc_ddrctl = 0x00000904,
+		.dmc_effctl = 0x004400C0,
+		.dmc_ddrcfg = 0x00000422,
+		.dmc_ddrtr0 = 0x20E0A424,
+		.dmc_ddrtr1 = 0x3020079E,
+		.dmc_ddrtr2 = 0x0032050D,
+		.dmc_ddrmr  = 0x00000842,
+		.dmc_ddrmr1 = 0x4,
+	},
+};
+#endif
+
+static inline void dmc_enter_self_refresh(void)
+{
+	if (bfin_read_DMC0_STAT() & MEMINITDONE) {
+		bfin_write_DMC0_CTL(bfin_read_DMC0_CTL() | SRREQ);
+		while (!(bfin_read_DMC0_STAT() & SRACK))
+			continue;
+	}
+}
+
+static inline void dmc_exit_self_refresh(void)
+{
+	if (bfin_read_DMC0_STAT() & MEMINITDONE) {
+		bfin_write_DMC0_CTL(bfin_read_DMC0_CTL() & ~SRREQ);
+		while (bfin_read_DMC0_STAT() & SRACK)
+			continue;
+	}
+}
+
+static inline void init_cgu(u32 cgu_div, u32 cgu_ctl)
+{
+	dmc_enter_self_refresh();
+
+	/* Don't set the same value of MSEL and DF to CGU_CTL */
+	if ((bfin_read32(CGU0_CTL) & (MSEL_MASK | DF_MASK))
+		!= cgu_ctl) {
+		bfin_write32(CGU0_DIV, cgu_div);
+		bfin_write32(CGU0_CTL, cgu_ctl);
+		while ((bfin_read32(CGU0_STAT) & (CLKSALGN | PLLBP)) ||
+			!(bfin_read32(CGU0_STAT) & PLOCK))
+			continue;
+	}
+
+	bfin_write32(CGU0_DIV, cgu_div | UPDT);
+	while (bfin_read32(CGU0_STAT) & CLKSALGN)
+		continue;
+
+	dmc_exit_self_refresh();
+}
+
+static inline void init_dmc(u32 dmc_clk)
+{
+	int i, dlldatacycle, dll_ctl;
+
+	for (i = 0; i < 7; i++) {
+		if (ddr_config_table[i].ddr_clk == dmc_clk) {
+			bfin_write_DMC0_CFG(ddr_config_table[i].dmc_ddrcfg);
+			bfin_write_DMC0_TR0(ddr_config_table[i].dmc_ddrtr0);
+			bfin_write_DMC0_TR1(ddr_config_table[i].dmc_ddrtr1);
+			bfin_write_DMC0_TR2(ddr_config_table[i].dmc_ddrtr2);
+			bfin_write_DMC0_MR(ddr_config_table[i].dmc_ddrmr);
+			bfin_write_DMC0_EMR1(ddr_config_table[i].dmc_ddrmr1);
+			bfin_write_DMC0_EFFCTL(ddr_config_table[i].dmc_effctl);
+			bfin_write_DMC0_CTL(ddr_config_table[i].dmc_ddrctl);
+			break;
+		}
+	}
+
+	while (!(bfin_read_DMC0_STAT() & MEMINITDONE))
+		continue;
+
+	dlldatacycle = (bfin_read_DMC0_STAT() & PHYRDPHASE) >> PHYRDPHASE_OFFSET;
+	dll_ctl = bfin_read_DMC0_DLLCTL();
+	dll_ctl &= ~DATACYC;
+	bfin_write_DMC0_DLLCTL(dll_ctl | (dlldatacycle << DATACYC_OFFSET));
+
+	while (!(bfin_read_DMC0_STAT() & DLLCALDONE))
+		continue;
+}
+#endif
+
+#endif /*__MEM_INIT_H__*/
+
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/mem_map.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/mem_map.h
new file mode 100644
index 0000000..5e21627
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/mem_map.h
@@ -0,0 +1,84 @@
+/*
+ * Common Blackfin memory map
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MEM_MAP_H__
+#define __BFIN_MEM_MAP_H__
+
+#include <mach/mem_map.h>
+
+/* Every Blackfin so far has MMRs like this */
+#ifndef COREMMR_BASE
+# define COREMMR_BASE 0xFFE00000
+#endif
+#ifndef SYSMMR_BASE
+# define SYSMMR_BASE  0xFFC00000
+#endif
+
+/* Every Blackfin so far has on-chip Scratch Pad SRAM like this */
+#ifndef L1_SCRATCH_START
+# define L1_SCRATCH_START  0xFFB00000
+# define L1_SCRATCH_LENGTH 0x1000
+#endif
+
+/* Most parts lack on-chip L2 SRAM */
+#ifndef L2_START
+# define L2_START  0
+# define L2_LENGTH 0
+#endif
+
+/* Most parts lack on-chip L1 ROM */
+#ifndef L1_ROM_START
+# define L1_ROM_START  0
+# define L1_ROM_LENGTH 0
+#endif
+
+/* Allow wonky SMP ports to override this */
+#ifndef GET_PDA_SAFE
+# define GET_PDA_SAFE(preg) \
+	preg.l = _cpu_pda; \
+	preg.h = _cpu_pda;
+# define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
+
+# ifndef __ASSEMBLY__
+
+static inline unsigned long get_l1_scratch_start_cpu(int cpu)
+{
+	return L1_SCRATCH_START;
+}
+static inline unsigned long get_l1_code_start_cpu(int cpu)
+{
+	return L1_CODE_START;
+}
+static inline unsigned long get_l1_data_a_start_cpu(int cpu)
+{
+	return L1_DATA_A_START;
+}
+static inline unsigned long get_l1_data_b_start_cpu(int cpu)
+{
+	return L1_DATA_B_START;
+}
+static inline unsigned long get_l1_scratch_start(void)
+{
+	return get_l1_scratch_start_cpu(0);
+}
+static inline unsigned long get_l1_code_start(void)
+{
+	return  get_l1_code_start_cpu(0);
+}
+static inline unsigned long get_l1_data_a_start(void)
+{
+	return get_l1_data_a_start_cpu(0);
+}
+static inline unsigned long get_l1_data_b_start(void)
+{
+	return get_l1_data_b_start_cpu(0);
+}
+
+# endif /* __ASSEMBLY__ */
+#endif /* !GET_PDA_SAFE */
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/mmu.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/mmu.h
new file mode 100644
index 0000000..26f6b70
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/mmu.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2002 David McCullough <davidm@snapgear.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __MMU_H
+#define __MMU_H
+
+struct sram_list_struct {
+	struct sram_list_struct *next;
+	void *addr;
+	size_t length;
+};
+
+typedef struct {
+	unsigned long end_brk;
+	unsigned long stack_start;
+
+	/* Points to the location in SDRAM where the L1 stack is normally
+	   saved, or NULL if the stack is always in SDRAM.  */
+	void *l1_stack_save;
+
+	struct sram_list_struct *sram_list;
+
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	unsigned long	exec_fdpic_loadmap;
+	unsigned long	interp_fdpic_loadmap;
+#endif
+#ifdef CONFIG_MPU
+	unsigned long *page_rwx_mask;
+#endif
+} mm_context_t;
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/mmu_context.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/mmu_context.h
new file mode 100644
index 0000000..0ce6de8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/mmu_context.h
@@ -0,0 +1,218 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BLACKFIN_MMU_CONTEXT_H__
+#define __BLACKFIN_MMU_CONTEXT_H__
+
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/mm_types.h>
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/cplbinit.h>
+#include <asm/sections.h>
+
+/* Note: L1 stacks are CPU-private things, so we bluntly disable this
+   feature in SMP mode, and use the per-CPU scratch SRAM bank only to
+   store the PDA instead. */
+
+extern void *current_l1_stack_save;
+extern int nr_l1stack_tasks;
+extern void *l1_stack_base;
+extern unsigned long l1_stack_len;
+
+extern int l1sram_free(const void*);
+extern void *l1sram_alloc_max(void*);
+
+static inline void free_l1stack(void)
+{
+	nr_l1stack_tasks--;
+	if (nr_l1stack_tasks == 0) {
+		l1sram_free(l1_stack_base);
+		l1_stack_base = NULL;
+		l1_stack_len = 0;
+	}
+}
+
+static inline unsigned long
+alloc_l1stack(unsigned long length, unsigned long *stack_base)
+{
+	if (nr_l1stack_tasks == 0) {
+		l1_stack_base = l1sram_alloc_max(&l1_stack_len);
+		if (!l1_stack_base)
+			return 0;
+	}
+
+	if (l1_stack_len < length) {
+		if (nr_l1stack_tasks == 0)
+			l1sram_free(l1_stack_base);
+		return 0;
+	}
+	*stack_base = (unsigned long)l1_stack_base;
+	nr_l1stack_tasks++;
+	return l1_stack_len;
+}
+
+static inline int
+activate_l1stack(struct mm_struct *mm, unsigned long sp_base)
+{
+	if (current_l1_stack_save)
+		memcpy(current_l1_stack_save, l1_stack_base, l1_stack_len);
+	mm->context.l1_stack_save = current_l1_stack_save = (void*)sp_base;
+	memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len);
+	return 1;
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+#define activate_mm(prev, next) switch_mm(prev, next, NULL)
+
+static inline void __switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
+			       struct task_struct *tsk)
+{
+#ifdef CONFIG_MPU
+	unsigned int cpu = smp_processor_id();
+#endif
+	if (prev_mm == next_mm)
+		return;
+#ifdef CONFIG_MPU
+	if (prev_mm->context.page_rwx_mask == current_rwx_mask[cpu]) {
+		flush_switched_cplbs(cpu);
+		set_mask_dcplbs(next_mm->context.page_rwx_mask, cpu);
+	}
+#endif
+
+#ifdef CONFIG_APP_STACK_L1
+	/* L1 stack switching.  */
+	if (!next_mm->context.l1_stack_save)
+		return;
+	if (next_mm->context.l1_stack_save == current_l1_stack_save)
+		return;
+	if (current_l1_stack_save) {
+		memcpy(current_l1_stack_save, l1_stack_base, l1_stack_len);
+	}
+	current_l1_stack_save = next_mm->context.l1_stack_save;
+	memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len);
+#endif
+}
+
+#ifdef CONFIG_IPIPE
+#define lock_mm_switch(flags)	flags = hard_local_irq_save_cond()
+#define unlock_mm_switch(flags)	hard_local_irq_restore_cond(flags)
+#else
+#define lock_mm_switch(flags)	do { (void)(flags); } while (0)
+#define unlock_mm_switch(flags)	do { (void)(flags); } while (0)
+#endif /* CONFIG_IPIPE */
+
+#ifdef CONFIG_MPU
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	unsigned long flags;
+	lock_mm_switch(flags);
+	__switch_mm(prev, next, tsk);
+	unlock_mm_switch(flags);
+}
+
+static inline void protect_page(struct mm_struct *mm, unsigned long addr,
+				unsigned long flags)
+{
+	unsigned long *mask = mm->context.page_rwx_mask;
+	unsigned long page;
+	unsigned long idx;
+	unsigned long bit;
+
+	if (unlikely(addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE))
+		page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> 12;
+	else
+		page = addr >> 12;
+	idx = page >> 5;
+	bit = 1 << (page & 31);
+
+	if (flags & VM_READ)
+		mask[idx] |= bit;
+	else
+		mask[idx] &= ~bit;
+	mask += page_mask_nelts;
+	if (flags & VM_WRITE)
+		mask[idx] |= bit;
+	else
+		mask[idx] &= ~bit;
+	mask += page_mask_nelts;
+	if (flags & VM_EXEC)
+		mask[idx] |= bit;
+	else
+		mask[idx] &= ~bit;
+}
+
+static inline void update_protections(struct mm_struct *mm)
+{
+	unsigned int cpu = smp_processor_id();
+	if (mm->context.page_rwx_mask == current_rwx_mask[cpu]) {
+		flush_switched_cplbs(cpu);
+		set_mask_dcplbs(mm->context.page_rwx_mask, cpu);
+	}
+}
+#else /* !CONFIG_MPU */
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	__switch_mm(prev, next, tsk);
+}
+#endif
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/* Called when creating a new context during fork() or execve().  */
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+#ifdef CONFIG_MPU
+	unsigned long p = __get_free_pages(GFP_KERNEL, page_mask_order);
+	mm->context.page_rwx_mask = (unsigned long *)p;
+	memset(mm->context.page_rwx_mask, 0,
+	       page_mask_nelts * 3 * sizeof(long));
+#endif
+	return 0;
+}
+
+static inline void destroy_context(struct mm_struct *mm)
+{
+	struct sram_list_struct *tmp;
+#ifdef CONFIG_MPU
+	unsigned int cpu = smp_processor_id();
+#endif
+
+#ifdef CONFIG_APP_STACK_L1
+	if (current_l1_stack_save == mm->context.l1_stack_save)
+		current_l1_stack_save = 0;
+	if (mm->context.l1_stack_save)
+		free_l1stack();
+#endif
+
+	while ((tmp = mm->context.sram_list)) {
+		mm->context.sram_list = tmp->next;
+		sram_free(tmp->addr);
+		kfree(tmp);
+	}
+#ifdef CONFIG_MPU
+	if (current_rwx_mask[cpu] == mm->context.page_rwx_mask)
+		current_rwx_mask[cpu] = NULL;
+	free_pages((unsigned long)mm->context.page_rwx_mask, page_mask_order);
+#endif
+}
+
+#define ipipe_mm_switch_protect(flags)		\
+	flags = hard_local_irq_save_cond()
+
+#define ipipe_mm_switch_unprotect(flags)	\
+	hard_local_irq_restore_cond(flags)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/module.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/module.h
new file mode 100644
index 0000000..231a149
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/module.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _ASM_BFIN_MODULE_H
+#define _ASM_BFIN_MODULE_H
+
+#include <asm-generic/module.h>
+
+struct mod_arch_specific {
+	Elf_Shdr	*text_l1;
+	Elf_Shdr	*data_a_l1;
+	Elf_Shdr	*bss_a_l1;
+	Elf_Shdr	*data_b_l1;
+	Elf_Shdr	*bss_b_l1;
+	Elf_Shdr	*text_l2;
+	Elf_Shdr	*data_l2;
+	Elf_Shdr	*bss_l2;
+};
+#endif				/* _ASM_BFIN_MODULE_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/nand.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/nand.h
new file mode 100644
index 0000000..256c50d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/nand.h
@@ -0,0 +1,40 @@
+/*
+ * BF5XX - NAND flash controller platform_device info
+ *
+ * Copyright 2007-2008 Analog Devices, Inc.
+ *
+ * Licensed under the GPL-2
+ */
+
+/* struct bf5xx_nand_platform
+ *
+ * define a interface between platform board specific code and
+ * bf54x NFC driver.
+ *
+ * nr_partitions = number of partitions pointed to be partitoons (or zero)
+ * partitions	 = mtd partition list
+ */
+
+#define NFC_PG_SIZE_OFFSET	9
+
+#define NFC_NWIDTH_8		0
+#define NFC_NWIDTH_16		1
+#define NFC_NWIDTH_OFFSET	8
+
+#define NFC_RDDLY_OFFSET	4
+#define NFC_WRDLY_OFFSET	0
+
+#define NFC_STAT_NBUSY		1
+
+struct bf5xx_nand_platform {
+	/* NAND chip information */
+	unsigned short		data_width;
+
+	/* RD/WR strobe delay timing information, all times in SCLK cycles */
+	unsigned short		rd_dly;
+	unsigned short		wr_dly;
+
+	/* NAND MTD partition information */
+	int                     nr_partitions;
+	struct mtd_partition    *partitions;
+};
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/nmi.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/nmi.h
new file mode 100644
index 0000000..107d237
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/nmi.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2
+ */
+
+#ifndef _BFIN_NMI_H_
+#define _BFIN_NMI_H_
+
+#include <linux/nmi.h>
+
+extern void arch_touch_nmi_watchdog(void);
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/page.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/page.h
new file mode 100644
index 0000000..b93474d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/page.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BLACKFIN_PAGE_H
+#define _BLACKFIN_PAGE_H
+
+#define ARCH_PFN_OFFSET (CONFIG_PHY_RAM_BASE_ADDRESS >> PAGE_SHIFT)
+#define MAP_NR(addr) ((unsigned long)(addr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(VM_READ | VM_WRITE | \
+	((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+		 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/page.h>
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/page_offset.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/page_offset.h
new file mode 100644
index 0000000..d06a89b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/page_offset.h
@@ -0,0 +1,11 @@
+/*
+ * This handles the memory map
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifdef CONFIG_BLACKFIN
+#define PAGE_OFFSET_RAW		0x00000000
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/pci.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/pci.h
new file mode 100644
index 0000000..e6458dd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/pci.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Changed from asm-m68k version, Lineo Inc. 	May 2001	*/
+
+#ifndef _ASM_BFIN_PCI_H
+#define _ASM_BFIN_PCI_H
+
+#include <linux/scatterlist.h>
+#include <asm-generic/pci.h>
+
+#define PCIBIOS_MIN_IO 0x00001000
+#define PCIBIOS_MIN_MEM 0x10000000
+
+#endif				/* _ASM_BFIN_PCI_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/pda.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/pda.h
new file mode 100644
index 0000000..68d6f66
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/pda.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *                         Philippe Gerum <rpm@xenomai.org>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _ASM_BLACKFIN_PDA_H
+#define _ASM_BLACKFIN_PDA_H
+
+#include <mach/anomaly.h>
+
+#ifndef __ASSEMBLY__
+
+struct blackfin_pda {			/* Per-processor Data Area */
+#ifdef CONFIG_SMP
+	struct blackfin_pda *next;
+#endif
+
+	unsigned long syscfg;
+#ifdef CONFIG_SMP
+	unsigned long imask;		/* Current IMASK value */
+#endif
+
+	unsigned long *ipdt;		/* Start of switchable I-CPLB table */
+	unsigned long *ipdt_swapcount;	/* Number of swaps in ipdt */
+	unsigned long *dpdt;		/* Start of switchable D-CPLB table */
+	unsigned long *dpdt_swapcount;	/* Number of swaps in dpdt */
+
+	/*
+	 * Single instructions can have multiple faults, which
+	 * need to be handled by traps.c, in irq5. We store
+	 * the exception cause to ensure we don't miss a
+	 * double fault condition
+	 */
+	unsigned long ex_iptr;
+	unsigned long ex_optr;
+	unsigned long ex_buf[4];
+	unsigned long ex_imask;		/* Saved imask from exception */
+	unsigned long ex_ipend;		/* Saved IPEND from exception */
+	unsigned long *ex_stack;	/* Exception stack space */
+
+#ifdef ANOMALY_05000261
+	unsigned long last_cplb_fault_retx;
+#endif
+	unsigned long dcplb_fault_addr;
+	unsigned long icplb_fault_addr;
+	unsigned long retx;
+	unsigned long seqstat;
+	unsigned int __nmi_count;	/* number of times NMI asserted on this CPU */
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	unsigned long dcplb_doublefault_addr;
+	unsigned long icplb_doublefault_addr;
+	unsigned long retx_doublefault;
+	unsigned long seqstat_doublefault;
+#endif
+};
+
+struct blackfin_initial_pda {
+	void *retx;
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	void *dcplb_doublefault_addr;
+	void *icplb_doublefault_addr;
+	void *retx_doublefault;
+	unsigned seqstat_doublefault;
+#endif
+};
+
+extern struct blackfin_pda cpu_pda[];
+
+#endif	/* __ASSEMBLY__ */
+
+#endif /* _ASM_BLACKFIN_PDA_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/perf_event.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/perf_event.h
new file mode 100644
index 0000000..3d2b171
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/perf_event.h
@@ -0,0 +1 @@
+#define MAX_HWEVENTS 2
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/pgtable.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/pgtable.h
new file mode 100644
index 0000000..c1ee3d6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/pgtable.h
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BLACKFIN_PGTABLE_H
+#define _BLACKFIN_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <asm/page.h>
+#include <asm/def_LPBlackfin.h>
+
+typedef pte_t *pte_addr_t;
+/*
+* Trivial page table functions.
+*/
+#define pgd_present(pgd)	(1)
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr)	(1)
+
+#define pmd_offset(a, b)	((void *)0)
+#define pmd_none(x)		(!pmd_val(x))
+#define pmd_present(x)		(pmd_val(x))
+#define pmd_clear(xp)		do { set_pmd(xp, __pmd(0)); } while (0)
+#define pmd_bad(x)		(pmd_val(x) & ~PAGE_MASK)
+
+#define kern_addr_valid(addr) (1)
+
+#define PAGE_NONE		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_SHARED		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_COPY		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_READONLY		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_KERNEL		__pgprot(0)	/* these mean nothing to NO_MM */
+#define pgprot_noncached(prot)	(prot)
+
+extern void paging_init(void);
+
+#define __swp_type(x)		(0)
+#define __swp_offset(x)		(0)
+#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
+
+/*
+ * Page assess control based on Blackfin CPLB management
+ */
+#define _PAGE_RD	(CPLB_USER_RD)
+#define _PAGE_WR	(CPLB_USER_WR)
+#define _PAGE_USER	(CPLB_USER_RD | CPLB_USER_WR)
+#define _PAGE_ACCESSED	CPLB_ALL_ACCESS
+#define _PAGE_DIRTY	(CPLB_DIRTY)
+
+#define PTE_BIT_FUNC(fn, op) \
+	static inline pte_t pte_##fn(pte_t _pte) { _pte.pte op; return _pte; }
+
+PTE_BIT_FUNC(rdprotect, &= ~_PAGE_RD);
+PTE_BIT_FUNC(mkread, |= _PAGE_RD);
+PTE_BIT_FUNC(wrprotect, &= ~_PAGE_WR);
+PTE_BIT_FUNC(mkwrite, |= _PAGE_WR);
+PTE_BIT_FUNC(exprotect, &= ~_PAGE_USER);
+PTE_BIT_FUNC(mkexec, |= _PAGE_USER);
+PTE_BIT_FUNC(mkclean, &= ~_PAGE_DIRTY);
+PTE_BIT_FUNC(mkdirty, |= _PAGE_DIRTY);
+PTE_BIT_FUNC(mkold, &= ~_PAGE_ACCESSED);
+PTE_BIT_FUNC(mkyoung, |= _PAGE_ACCESSED);
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr)	virt_to_page(empty_zero_page)
+extern char empty_zero_page[];
+
+#define swapper_pg_dir ((pgd_t *) 0)
+/*
+ * No page table caches to initialise.
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define	VMALLOC_START	0
+#define	VMALLOC_END	0xffffffff
+
+/* provide a special get_unmapped_area for framebuffer mmaps of nommu */
+extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long,
+					  unsigned long, unsigned long,
+					  unsigned long);
+#define HAVE_ARCH_FB_UNMAPPED_AREA
+
+#define pgprot_writecombine pgprot_noncached
+
+#include <asm-generic/pgtable.h>
+
+#endif				/* _BLACKFIN_PGTABLE_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/pm.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/pm.h
new file mode 100644
index 0000000..f72239b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/pm.h
@@ -0,0 +1,31 @@
+/*
+ * Blackfin bf609 power management
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2
+ */
+
+#ifndef __PM_H__
+#define __PM_H__
+
+#include <linux/suspend.h>
+
+struct bfin_cpu_pm_fns {
+	void    (*save)(unsigned long *);
+	void    (*restore)(unsigned long *);
+	int     (*valid)(suspend_state_t state);
+	void    (*enter)(suspend_state_t state);
+	int     (*prepare)(void);
+	void    (*finish)(void);
+};
+
+extern struct bfin_cpu_pm_fns *bfin_cpu_pm;
+
+# ifdef CONFIG_BFIN_COREB
+void bfin_coreb_start(void);
+void bfin_coreb_stop(void);
+void bfin_coreb_reset(void);
+# endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/portmux.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/portmux.h
new file mode 100644
index 0000000..c8f0939
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/portmux.h
@@ -0,0 +1,1204 @@
+/*
+ * Common header file for Blackfin family of processors
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _PORTMUX_H_
+#define _PORTMUX_H_
+
+#define P_IDENT(x)	((x) & 0x1FF)
+#define P_FUNCT(x)	(((x) & 0x3) << 9)
+#define P_FUNCT2MUX(x)	(((x) >> 9) & 0x3)
+#define P_DEFINED	0x8000
+#define P_UNDEF		0x4000
+#define P_MAYSHARE	0x2000
+#define P_DONTCARE	0x1000
+
+#ifdef CONFIG_PINCTRL
+int bfin_internal_set_wake(unsigned int irq, unsigned int state);
+
+#define gpio_pint_regs bfin_pint_regs
+#define adi_internal_set_wake bfin_internal_set_wake
+
+#define peripheral_request(per, label) (0)
+#define peripheral_free(per)
+#define peripheral_request_list(per, label) (0)
+#define peripheral_free_list(per)
+#else
+int peripheral_request(unsigned short per, const char *label);
+void peripheral_free(unsigned short per);
+int peripheral_request_list(const unsigned short per[], const char *label);
+void peripheral_free_list(const unsigned short per[]);
+#endif
+
+#include <linux/err.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <mach/portmux.h>
+#include <mach/gpio.h>
+
+#ifndef P_SPORT2_TFS
+#define P_SPORT2_TFS P_UNDEF
+#endif
+
+#ifndef P_SPORT2_DTSEC
+#define P_SPORT2_DTSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT2_DTPRI
+#define P_SPORT2_DTPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT2_TSCLK
+#define P_SPORT2_TSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT2_RFS
+#define P_SPORT2_RFS P_UNDEF
+#endif
+
+#ifndef P_SPORT2_DRSEC
+#define P_SPORT2_DRSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT2_DRPRI
+#define P_SPORT2_DRPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT2_RSCLK
+#define P_SPORT2_RSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT3_TFS
+#define P_SPORT3_TFS P_UNDEF
+#endif
+
+#ifndef P_SPORT3_DTSEC
+#define P_SPORT3_DTSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT3_DTPRI
+#define P_SPORT3_DTPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT3_TSCLK
+#define P_SPORT3_TSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT3_RFS
+#define P_SPORT3_RFS P_UNDEF
+#endif
+
+#ifndef P_SPORT3_DRSEC
+#define P_SPORT3_DRSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT3_DRPRI
+#define P_SPORT3_DRPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT3_RSCLK
+#define P_SPORT3_RSCLK P_UNDEF
+#endif
+
+#ifndef P_TMR4
+#define P_TMR4 P_UNDEF
+#endif
+
+#ifndef P_TMR5
+#define P_TMR5 P_UNDEF
+#endif
+
+#ifndef P_TMR6
+#define P_TMR6 P_UNDEF
+#endif
+
+#ifndef P_TMR7
+#define P_TMR7 P_UNDEF
+#endif
+
+#ifndef P_TWI1_SCL
+#define P_TWI1_SCL P_UNDEF
+#endif
+
+#ifndef P_TWI1_SDA
+#define P_TWI1_SDA P_UNDEF
+#endif
+
+#ifndef P_UART3_RTS
+#define P_UART3_RTS P_UNDEF
+#endif
+
+#ifndef P_UART3_CTS
+#define P_UART3_CTS P_UNDEF
+#endif
+
+#ifndef P_UART2_TX
+#define P_UART2_TX P_UNDEF
+#endif
+
+#ifndef P_UART2_RX
+#define P_UART2_RX P_UNDEF
+#endif
+
+#ifndef P_UART3_TX
+#define P_UART3_TX P_UNDEF
+#endif
+
+#ifndef P_UART3_RX
+#define P_UART3_RX P_UNDEF
+#endif
+
+#ifndef P_SPI2_SS
+#define P_SPI2_SS P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL1
+#define P_SPI2_SSEL1 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL2
+#define P_SPI2_SSEL2 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL3
+#define P_SPI2_SSEL3 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL4
+#define P_SPI2_SSEL4 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL5
+#define P_SPI2_SSEL5 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL6
+#define P_SPI2_SSEL6 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL7
+#define P_SPI2_SSEL7 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SCK
+#define P_SPI2_SCK P_UNDEF
+#endif
+
+#ifndef P_SPI2_MOSI
+#define P_SPI2_MOSI P_UNDEF
+#endif
+
+#ifndef P_SPI2_MISO
+#define P_SPI2_MISO P_UNDEF
+#endif
+
+#ifndef P_TMR0
+#define P_TMR0 P_UNDEF
+#endif
+
+#ifndef P_TMR1
+#define P_TMR1 P_UNDEF
+#endif
+
+#ifndef P_TMR2
+#define P_TMR2 P_UNDEF
+#endif
+
+#ifndef P_TMR3
+#define P_TMR3 P_UNDEF
+#endif
+
+#ifndef P_SPORT0_TFS
+#define P_SPORT0_TFS P_UNDEF
+#endif
+
+#ifndef P_SPORT0_DTSEC
+#define P_SPORT0_DTSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT0_DTPRI
+#define P_SPORT0_DTPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT0_TSCLK
+#define P_SPORT0_TSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT0_RFS
+#define P_SPORT0_RFS P_UNDEF
+#endif
+
+#ifndef P_SPORT0_DRSEC
+#define P_SPORT0_DRSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT0_DRPRI
+#define P_SPORT0_DRPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT0_RSCLK
+#define P_SPORT0_RSCLK P_UNDEF
+#endif
+
+#ifndef P_SD_D0
+#define P_SD_D0 P_UNDEF
+#endif
+
+#ifndef P_SD_D1
+#define P_SD_D1 P_UNDEF
+#endif
+
+#ifndef P_SD_D2
+#define P_SD_D2 P_UNDEF
+#endif
+
+#ifndef P_SD_D3
+#define P_SD_D3 P_UNDEF
+#endif
+
+#ifndef P_SD_CLK
+#define P_SD_CLK P_UNDEF
+#endif
+
+#ifndef P_SD_CMD
+#define P_SD_CMD P_UNDEF
+#endif
+
+#ifndef P_MMCLK
+#define P_MMCLK P_UNDEF
+#endif
+
+#ifndef P_MBCLK
+#define P_MBCLK P_UNDEF
+#endif
+
+#ifndef P_PPI1_D0
+#define P_PPI1_D0 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D1
+#define P_PPI1_D1 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D2
+#define P_PPI1_D2 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D3
+#define P_PPI1_D3 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D4
+#define P_PPI1_D4 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D5
+#define P_PPI1_D5 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D6
+#define P_PPI1_D6 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D7
+#define P_PPI1_D7 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D8
+#define P_PPI1_D8 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D9
+#define P_PPI1_D9 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D10
+#define P_PPI1_D10 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D11
+#define P_PPI1_D11 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D12
+#define P_PPI1_D12 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D13
+#define P_PPI1_D13 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D14
+#define P_PPI1_D14 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D15
+#define P_PPI1_D15 P_UNDEF
+#endif
+
+#ifndef P_HOST_D8
+#define P_HOST_D8 P_UNDEF
+#endif
+
+#ifndef P_HOST_D9
+#define P_HOST_D9 P_UNDEF
+#endif
+
+#ifndef P_HOST_D10
+#define P_HOST_D10 P_UNDEF
+#endif
+
+#ifndef P_HOST_D11
+#define P_HOST_D11 P_UNDEF
+#endif
+
+#ifndef P_HOST_D12
+#define P_HOST_D12 P_UNDEF
+#endif
+
+#ifndef P_HOST_D13
+#define P_HOST_D13 P_UNDEF
+#endif
+
+#ifndef P_HOST_D14
+#define P_HOST_D14 P_UNDEF
+#endif
+
+#ifndef P_HOST_D15
+#define P_HOST_D15 P_UNDEF
+#endif
+
+#ifndef P_HOST_D0
+#define P_HOST_D0 P_UNDEF
+#endif
+
+#ifndef P_HOST_D1
+#define P_HOST_D1 P_UNDEF
+#endif
+
+#ifndef P_HOST_D2
+#define P_HOST_D2 P_UNDEF
+#endif
+
+#ifndef P_HOST_D3
+#define P_HOST_D3 P_UNDEF
+#endif
+
+#ifndef P_HOST_D4
+#define P_HOST_D4 P_UNDEF
+#endif
+
+#ifndef P_HOST_D5
+#define P_HOST_D5 P_UNDEF
+#endif
+
+#ifndef P_HOST_D6
+#define P_HOST_D6 P_UNDEF
+#endif
+
+#ifndef P_HOST_D7
+#define P_HOST_D7 P_UNDEF
+#endif
+
+#ifndef P_SPORT1_TFS
+#define P_SPORT1_TFS P_UNDEF
+#endif
+
+#ifndef P_SPORT1_DTSEC
+#define P_SPORT1_DTSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT1_DTPRI
+#define P_SPORT1_DTPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT1_TSCLK
+#define P_SPORT1_TSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT1_RFS
+#define P_SPORT1_RFS P_UNDEF
+#endif
+
+#ifndef P_SPORT1_DRSEC
+#define P_SPORT1_DRSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT1_DRPRI
+#define P_SPORT1_DRPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT1_RSCLK
+#define P_SPORT1_RSCLK P_UNDEF
+#endif
+
+#ifndef P_PPI2_D0
+#define P_PPI2_D0 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D1
+#define P_PPI2_D1 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D2
+#define P_PPI2_D2 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D3
+#define P_PPI2_D3 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D4
+#define P_PPI2_D4 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D5
+#define P_PPI2_D5 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D6
+#define P_PPI2_D6 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D7
+#define P_PPI2_D7 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D18
+#define P_PPI0_D18 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D19
+#define P_PPI0_D19 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D20
+#define P_PPI0_D20 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D21
+#define P_PPI0_D21 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D22
+#define P_PPI0_D22 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D23
+#define P_PPI0_D23 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW0
+#define P_KEY_ROW0 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW1
+#define P_KEY_ROW1 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW2
+#define P_KEY_ROW2 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW3
+#define P_KEY_ROW3 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL0
+#define P_KEY_COL0 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL1
+#define P_KEY_COL1 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL2
+#define P_KEY_COL2 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL3
+#define P_KEY_COL3 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SCK
+#define P_SPI0_SCK P_UNDEF
+#endif
+
+#ifndef P_SPI0_MISO
+#define P_SPI0_MISO P_UNDEF
+#endif
+
+#ifndef P_SPI0_MOSI
+#define P_SPI0_MOSI P_UNDEF
+#endif
+
+#ifndef P_SPI0_SS
+#define P_SPI0_SS P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL1
+#define P_SPI0_SSEL1 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL2
+#define P_SPI0_SSEL2 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL3
+#define P_SPI0_SSEL3 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL4
+#define P_SPI0_SSEL4 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL5
+#define P_SPI0_SSEL5 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL6
+#define P_SPI0_SSEL6 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL7
+#define P_SPI0_SSEL7 P_UNDEF
+#endif
+
+#ifndef P_UART0_TX
+#define P_UART0_TX P_UNDEF
+#endif
+
+#ifndef P_UART0_RX
+#define P_UART0_RX P_UNDEF
+#endif
+
+#ifndef P_UART1_RTS
+#define P_UART1_RTS P_UNDEF
+#endif
+
+#ifndef P_UART1_CTS
+#define P_UART1_CTS P_UNDEF
+#endif
+
+#ifndef P_PPI1_CLK
+#define P_PPI1_CLK P_UNDEF
+#endif
+
+#ifndef P_PPI1_FS1
+#define P_PPI1_FS1 P_UNDEF
+#endif
+
+#ifndef P_PPI1_FS2
+#define P_PPI1_FS2 P_UNDEF
+#endif
+
+#ifndef P_TWI0_SCL
+#define P_TWI0_SCL P_UNDEF
+#endif
+
+#ifndef P_TWI0_SDA
+#define P_TWI0_SDA P_UNDEF
+#endif
+
+#ifndef P_KEY_COL7
+#define P_KEY_COL7 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW6
+#define P_KEY_ROW6 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL6
+#define P_KEY_COL6 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW5
+#define P_KEY_ROW5 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL5
+#define P_KEY_COL5 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW4
+#define P_KEY_ROW4 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL4
+#define P_KEY_COL4 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW7
+#define P_KEY_ROW7 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D0
+#define P_PPI0_D0 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D1
+#define P_PPI0_D1 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D2
+#define P_PPI0_D2 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D3
+#define P_PPI0_D3 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D4
+#define P_PPI0_D4 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D5
+#define P_PPI0_D5 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D6
+#define P_PPI0_D6 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D7
+#define P_PPI0_D7 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D8
+#define P_PPI0_D8 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D9
+#define P_PPI0_D9 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D10
+#define P_PPI0_D10 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D11
+#define P_PPI0_D11 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D12
+#define P_PPI0_D12 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D13
+#define P_PPI0_D13 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D14
+#define P_PPI0_D14 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D15
+#define P_PPI0_D15 P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D0A
+#define P_ATAPI_D0A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D1A
+#define P_ATAPI_D1A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D2A
+#define P_ATAPI_D2A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D3A
+#define P_ATAPI_D3A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D4A
+#define P_ATAPI_D4A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D5A
+#define P_ATAPI_D5A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D6A
+#define P_ATAPI_D6A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D7A
+#define P_ATAPI_D7A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D8A
+#define P_ATAPI_D8A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D9A
+#define P_ATAPI_D9A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D10A
+#define P_ATAPI_D10A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D11A
+#define P_ATAPI_D11A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D12A
+#define P_ATAPI_D12A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D13A
+#define P_ATAPI_D13A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D14A
+#define P_ATAPI_D14A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D15A
+#define P_ATAPI_D15A P_UNDEF
+#endif
+
+#ifndef P_PPI0_CLK
+#define P_PPI0_CLK P_UNDEF
+#endif
+
+#ifndef P_PPI0_FS1
+#define P_PPI0_FS1 P_UNDEF
+#endif
+
+#ifndef P_PPI0_FS2
+#define P_PPI0_FS2 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D16
+#define P_PPI0_D16 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D17
+#define P_PPI0_D17 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL1
+#define P_SPI1_SSEL1 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL2
+#define P_SPI1_SSEL2 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL3
+#define P_SPI1_SSEL3 P_UNDEF
+#endif
+
+
+#ifndef P_SPI1_SSEL4
+#define P_SPI1_SSEL4 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL5
+#define P_SPI1_SSEL5 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL6
+#define P_SPI1_SSEL6 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL7
+#define P_SPI1_SSEL7 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SCK
+#define P_SPI1_SCK P_UNDEF
+#endif
+
+#ifndef P_SPI1_MISO
+#define P_SPI1_MISO P_UNDEF
+#endif
+
+#ifndef P_SPI1_MOSI
+#define P_SPI1_MOSI P_UNDEF
+#endif
+
+#ifndef P_SPI1_SS
+#define P_SPI1_SS P_UNDEF
+#endif
+
+#ifndef P_CAN0_TX
+#define P_CAN0_TX P_UNDEF
+#endif
+
+#ifndef P_CAN0_RX
+#define P_CAN0_RX P_UNDEF
+#endif
+
+#ifndef P_CAN1_TX
+#define P_CAN1_TX P_UNDEF
+#endif
+
+#ifndef P_CAN1_RX
+#define P_CAN1_RX P_UNDEF
+#endif
+
+#ifndef P_ATAPI_A0A
+#define P_ATAPI_A0A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_A1A
+#define P_ATAPI_A1A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_A2A
+#define P_ATAPI_A2A P_UNDEF
+#endif
+
+#ifndef P_HOST_CE
+#define P_HOST_CE P_UNDEF
+#endif
+
+#ifndef P_HOST_RD
+#define P_HOST_RD P_UNDEF
+#endif
+
+#ifndef P_HOST_WR
+#define P_HOST_WR P_UNDEF
+#endif
+
+#ifndef P_MTXONB
+#define P_MTXONB P_UNDEF
+#endif
+
+#ifndef P_PPI2_FS2
+#define P_PPI2_FS2 P_UNDEF
+#endif
+
+#ifndef P_PPI2_FS1
+#define P_PPI2_FS1 P_UNDEF
+#endif
+
+#ifndef P_PPI2_CLK
+#define P_PPI2_CLK P_UNDEF
+#endif
+
+#ifndef P_CNT_CZM
+#define P_CNT_CZM P_UNDEF
+#endif
+
+#ifndef P_UART1_TX
+#define P_UART1_TX P_UNDEF
+#endif
+
+#ifndef P_UART1_RX
+#define P_UART1_RX P_UNDEF
+#endif
+
+#ifndef P_ATAPI_RESET
+#define P_ATAPI_RESET P_UNDEF
+#endif
+
+#ifndef P_HOST_ADDR
+#define P_HOST_ADDR P_UNDEF
+#endif
+
+#ifndef P_HOST_ACK
+#define P_HOST_ACK P_UNDEF
+#endif
+
+#ifndef P_MTX
+#define P_MTX P_UNDEF
+#endif
+
+#ifndef P_MRX
+#define P_MRX P_UNDEF
+#endif
+
+#ifndef P_MRXONB
+#define P_MRXONB P_UNDEF
+#endif
+
+#ifndef P_A4
+#define P_A4 P_UNDEF
+#endif
+
+#ifndef P_A5
+#define P_A5 P_UNDEF
+#endif
+
+#ifndef P_A6
+#define P_A6 P_UNDEF
+#endif
+
+#ifndef P_A7
+#define P_A7 P_UNDEF
+#endif
+
+#ifndef P_A8
+#define P_A8 P_UNDEF
+#endif
+
+#ifndef P_A9
+#define P_A9 P_UNDEF
+#endif
+
+#ifndef P_PPI1_FS3
+#define P_PPI1_FS3 P_UNDEF
+#endif
+
+#ifndef P_PPI2_FS3
+#define P_PPI2_FS3 P_UNDEF
+#endif
+
+#ifndef P_TMR8
+#define P_TMR8 P_UNDEF
+#endif
+
+#ifndef P_TMR9
+#define P_TMR9 P_UNDEF
+#endif
+
+#ifndef P_TMR10
+#define P_TMR10 P_UNDEF
+#endif
+#ifndef P_TMR11
+#define P_TMR11 P_UNDEF
+#endif
+
+#ifndef P_DMAR0
+#define P_DMAR0 P_UNDEF
+#endif
+
+#ifndef P_DMAR1
+#define P_DMAR1 P_UNDEF
+#endif
+
+#ifndef P_PPI0_FS3
+#define P_PPI0_FS3 P_UNDEF
+#endif
+
+#ifndef P_CNT_CDG
+#define P_CNT_CDG P_UNDEF
+#endif
+
+#ifndef P_CNT_CUD
+#define P_CNT_CUD P_UNDEF
+#endif
+
+#ifndef P_A10
+#define P_A10 P_UNDEF
+#endif
+
+#ifndef P_A11
+#define P_A11 P_UNDEF
+#endif
+
+#ifndef P_A12
+#define P_A12 P_UNDEF
+#endif
+
+#ifndef P_A13
+#define P_A13 P_UNDEF
+#endif
+
+#ifndef P_A14
+#define P_A14 P_UNDEF
+#endif
+
+#ifndef P_A15
+#define P_A15 P_UNDEF
+#endif
+
+#ifndef P_A16
+#define P_A16 P_UNDEF
+#endif
+
+#ifndef P_A17
+#define P_A17 P_UNDEF
+#endif
+
+#ifndef P_A18
+#define P_A18 P_UNDEF
+#endif
+
+#ifndef P_A19
+#define P_A19 P_UNDEF
+#endif
+
+#ifndef P_A20
+#define P_A20 P_UNDEF
+#endif
+
+#ifndef P_A21
+#define P_A21 P_UNDEF
+#endif
+
+#ifndef P_A22
+#define P_A22 P_UNDEF
+#endif
+
+#ifndef P_A23
+#define P_A23 P_UNDEF
+#endif
+
+#ifndef P_A24
+#define P_A24 P_UNDEF
+#endif
+
+#ifndef P_A25
+#define P_A25 P_UNDEF
+#endif
+
+#ifndef P_NOR_CLK
+#define P_NOR_CLK P_UNDEF
+#endif
+
+#ifndef P_TMRCLK
+#define P_TMRCLK P_UNDEF
+#endif
+
+#ifndef P_AMC_ARDY_NOR_WAIT
+#define P_AMC_ARDY_NOR_WAIT P_UNDEF
+#endif
+
+#ifndef P_NAND_CE
+#define P_NAND_CE P_UNDEF
+#endif
+
+#ifndef P_NAND_RB
+#define P_NAND_RB P_UNDEF
+#endif
+
+#ifndef P_ATAPI_DIOR
+#define P_ATAPI_DIOR P_UNDEF
+#endif
+
+#ifndef P_ATAPI_DIOW
+#define P_ATAPI_DIOW P_UNDEF
+#endif
+
+#ifndef P_ATAPI_CS0
+#define P_ATAPI_CS0 P_UNDEF
+#endif
+
+#ifndef P_ATAPI_CS1
+#define P_ATAPI_CS1 P_UNDEF
+#endif
+
+#ifndef P_ATAPI_DMACK
+#define P_ATAPI_DMACK P_UNDEF
+#endif
+
+#ifndef P_ATAPI_DMARQ
+#define P_ATAPI_DMARQ P_UNDEF
+#endif
+
+#ifndef P_ATAPI_INTRQ
+#define P_ATAPI_INTRQ P_UNDEF
+#endif
+
+#ifndef P_ATAPI_IORDY
+#define P_ATAPI_IORDY P_UNDEF
+#endif
+
+#ifndef P_AMC_BR
+#define P_AMC_BR P_UNDEF
+#endif
+
+#ifndef P_AMC_BG
+#define P_AMC_BG P_UNDEF
+#endif
+
+#ifndef P_AMC_BGH
+#define P_AMC_BGH P_UNDEF
+#endif
+
+/* EMAC */
+
+#ifndef P_MII0_ETxD0
+#define P_MII0_ETxD0 P_UNDEF
+#endif
+
+#ifndef P_MII0_ETxD1
+#define P_MII0_ETxD1 P_UNDEF
+#endif
+
+#ifndef P_MII0_ETxD2
+#define P_MII0_ETxD2 P_UNDEF
+#endif
+
+#ifndef P_MII0_ETxD3
+#define P_MII0_ETxD3 P_UNDEF
+#endif
+
+#ifndef P_MII0_ETxEN
+#define P_MII0_ETxEN P_UNDEF
+#endif
+
+#ifndef P_MII0_TxCLK
+#define P_MII0_TxCLK P_UNDEF
+#endif
+
+#ifndef P_MII0_PHYINT
+#define P_MII0_PHYINT P_UNDEF
+#endif
+
+#ifndef P_MII0_COL
+#define P_MII0_COL P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxD0
+#define P_MII0_ERxD0 P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxD1
+#define P_MII0_ERxD1 P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxD2
+#define P_MII0_ERxD2 P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxD3
+#define P_MII0_ERxD3 P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxDV
+#define P_MII0_ERxDV P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxCLK
+#define P_MII0_ERxCLK P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxER
+#define P_MII0_ERxER P_UNDEF
+#endif
+
+#ifndef P_MII0_CRS
+#define P_MII0_CRS P_UNDEF
+#endif
+
+#ifndef P_RMII0_REF_CLK
+#define P_RMII0_REF_CLK P_UNDEF
+#endif
+
+#ifndef P_RMII0_MDINT
+#define P_RMII0_MDINT P_UNDEF
+#endif
+
+#ifndef P_RMII0_CRS_DV
+#define P_RMII0_CRS_DV P_UNDEF
+#endif
+
+#ifndef P_MDC
+#define P_MDC P_UNDEF
+#endif
+
+#ifndef P_MDIO
+#define P_MDIO P_UNDEF
+#endif
+
+#endif				/* _PORTMUX_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/processor.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/processor.h
new file mode 100644
index 0000000..dbdbb8a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/processor.h
@@ -0,0 +1,145 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_PROCESSOR_H
+#define __ASM_BFIN_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <asm/ptrace.h>
+#include <mach/blackfin.h>
+
+static inline unsigned long rdusp(void)
+{
+	unsigned long usp;
+
+	__asm__ __volatile__("%0 = usp;\n\t":"=da"(usp));
+	return usp;
+}
+
+static inline void wrusp(unsigned long usp)
+{
+	__asm__ __volatile__("usp = %0;\n\t"::"da"(usp));
+}
+
+static inline unsigned long __get_SP(void)
+{
+	unsigned long sp;
+
+	__asm__ __volatile__("%0 = sp;\n\t" : "=da"(sp));
+	return sp;
+}
+
+/*
+ * User space process size: 1st byte beyond user address space.
+ * Fairly meaningless on nommu.  Parts of user programs can be scattered
+ * in a lot of places, so just disable this by setting it to 0xFFFFFFFF.
+ */
+#define TASK_SIZE	0xFFFFFFFF
+
+#ifdef __KERNEL__
+#define STACK_TOP	TASK_SIZE
+#endif
+
+#define TASK_UNMAPPED_BASE	0
+
+struct thread_struct {
+	unsigned long ksp;	/* kernel stack pointer */
+	unsigned long usp;	/* user stack pointer */
+	unsigned short seqstat;	/* saved status register */
+	unsigned long esp0;	/* points to SR of stack frame pt_regs */
+	unsigned long pc;	/* instruction pointer */
+	void *        debuggerinfo;
+};
+
+#define INIT_THREAD  {						\
+	sizeof(init_stack) + (unsigned long) init_stack, 0,	\
+	PS_S, 0, 0						\
+}
+
+extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
+					       unsigned long new_sp);
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define	KSTK_EIP(tsk)							\
+    ({									\
+	unsigned long eip = 0;						\
+	if ((tsk)->thread.esp0 > PAGE_SIZE &&				\
+	    MAP_NR((tsk)->thread.esp0) < max_mapnr)			\
+	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc;	\
+	eip; })
+#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax()    	smp_mb()
+
+/* Get the Silicon Revision of the chip */
+static inline uint32_t __pure bfin_revid(void)
+{
+	/* Always use CHIPID, to work around ANOMALY_05000234 */
+	uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28;
+
+#ifdef _BOOTROM_GET_DXE_ADDRESS_TWI
+	/*
+	 * ANOMALY_05000364
+	 * Incorrect Revision Number in DSPID Register
+	 */
+	if (ANOMALY_05000364 &&
+	    bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI) == 0x2796)
+		revid = 1;
+#endif
+
+	return revid;
+}
+
+static inline uint16_t __pure bfin_cpuid(void)
+{
+	return (bfin_read_CHIPID() & CHIPID_FAMILY) >> 12;
+}
+
+static inline uint32_t __pure bfin_dspid(void)
+{
+	return bfin_read_DSPID();
+}
+
+#define blackfin_core_id() (bfin_dspid() & 0xff)
+
+static inline uint32_t __pure bfin_compiled_revid(void)
+{
+#if defined(CONFIG_BF_REV_0_0)
+	return 0;
+#elif defined(CONFIG_BF_REV_0_1)
+	return 1;
+#elif defined(CONFIG_BF_REV_0_2)
+	return 2;
+#elif defined(CONFIG_BF_REV_0_3)
+	return 3;
+#elif defined(CONFIG_BF_REV_0_4)
+	return 4;
+#elif defined(CONFIG_BF_REV_0_5)
+	return 5;
+#elif defined(CONFIG_BF_REV_0_6)
+	return 6;
+#elif defined(CONFIG_BF_REV_ANY)
+	return 0xffff;
+#else
+	return -1;
+#endif
+}
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/pseudo_instructions.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/pseudo_instructions.h
new file mode 100644
index 0000000..b00adfa
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/pseudo_instructions.h
@@ -0,0 +1,18 @@
+/*
+ * header file for pseudo instructions
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BLACKFIN_PSEUDO_
+#define _BLACKFIN_PSEUDO_
+
+#include <linux/types.h>
+#include <asm/ptrace.h>
+
+extern bool execute_pseudodbg_assert(struct pt_regs *fp, unsigned int opcode);
+extern bool execute_pseudodbg(struct pt_regs *fp, unsigned int opcode);
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/ptrace.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/ptrace.h
new file mode 100644
index 0000000..c004915
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/ptrace.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+#ifndef _BFIN_PTRACE_H
+#define _BFIN_PTRACE_H
+
+#include <uapi/asm/ptrace.h>
+
+#ifndef __ASSEMBLY__
+
+/* user_mode returns true if only one bit is set in IPEND, other than the
+   master interrupt enable.  */
+#define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
+
+#define arch_has_single_step()	(1)
+/* common code demands this function */
+#define ptrace_disable(child) user_disable_single_step(child)
+#define current_user_stack_pointer() rdusp()
+
+extern int is_user_addr_valid(struct task_struct *child,
+			      unsigned long start, unsigned long len);
+
+/*
+ * Get the address of the live pt_regs for the specified task.
+ * These are saved onto the top kernel stack when the process
+ * is not running.
+ *
+ * Note: if a user thread is execve'd from kernel space, the
+ * kernel stack will not be empty on entry to the kernel, so
+ * ptracing these tasks will fail.
+ */
+#define task_pt_regs(task) \
+	(struct pt_regs *) \
+	    ((unsigned long)task_stack_page(task) + \
+	     (THREAD_SIZE - sizeof(struct pt_regs)))
+
+#include <asm-generic/ptrace.h>
+
+#endif				/* __ASSEMBLY__ */
+#endif				/* _BFIN_PTRACE_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/reboot.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/reboot.h
new file mode 100644
index 0000000..ae1e363
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/reboot.h
@@ -0,0 +1,20 @@
+/*
+ * reboot.h - shutdown/reboot header
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_REBOOT_H__
+#define __ASM_REBOOT_H__
+
+/* optional board specific hooks */
+extern void native_machine_restart(char *cmd);
+extern void native_machine_halt(void);
+extern void native_machine_power_off(void);
+
+/* common reboot workarounds */
+extern void bfin_reset_boot_spi_cs(unsigned short pin);
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/rwlock.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/rwlock.h
new file mode 100644
index 0000000..98ebc07
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/rwlock.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_BLACKFIN_RWLOCK_H
+#define _ASM_BLACKFIN_RWLOCK_H
+
+#define RW_LOCK_BIAS	0x01000000
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/scb.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/scb.h
new file mode 100644
index 0000000..a294cc0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/scb.h
@@ -0,0 +1,21 @@
+/*
+ * arch/blackfin/mach-common/scb-init.c - reprogram system cross bar priority
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#define SCB_SLOT_OFFSET	24
+#define SCB_MI_MAX_SLOT 32
+
+struct scb_mi_prio {
+	unsigned long scb_mi_arbr;
+	unsigned long scb_mi_arbw;
+	unsigned char scb_mi_slots;
+	unsigned char scb_mi_prio[SCB_MI_MAX_SLOT];
+};
+
+extern struct scb_mi_prio scb_data[];
+
+extern void init_scb(void);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/sections.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/sections.h
new file mode 100644
index 0000000..fbd4084
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/sections.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BLACKFIN_SECTIONS_H
+#define _BLACKFIN_SECTIONS_H
+
+/* only used when MTD_UCLINUX */
+extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
+
+extern unsigned long _ramstart, _ramend, _rambase;
+extern unsigned long memory_start, memory_end, physical_mem_end;
+
+/*
+ * The weak markings on the lengths might seem weird, but this is required
+ * in order to make gcc accept the fact that these may actually have a value
+ * of 0 (since they aren't actually addresses, but sizes of sections).
+ */
+extern char _stext_l1[], _etext_l1[], _text_l1_lma[], __weak _text_l1_len[];
+extern char _sdata_l1[], _edata_l1[], _sbss_l1[], _ebss_l1[],
+	_data_l1_lma[], __weak _data_l1_len[];
+#ifdef CONFIG_ROMKERNEL
+extern char _data_lma[], _data_len[], _sinitdata[], _einitdata[], _init_data_lma[], _init_data_len[];
+#endif
+extern char _sdata_b_l1[], _edata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
+	_data_b_l1_lma[], __weak _data_b_l1_len[];
+extern char _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[],
+	_sbss_l2[], _ebss_l2[], _l2_lma[], __weak _l2_len[];
+
+#include <asm/mem_map.h>
+
+/* Blackfin systems have discontinuous memory map and no virtualized memory */
+static inline int arch_is_kernel_text(unsigned long addr)
+{
+	return
+		(L1_CODE_LENGTH &&
+		 addr >= (unsigned long)_stext_l1 &&
+		 addr <  (unsigned long)_etext_l1)
+		||
+		(L2_LENGTH &&
+		 addr >= (unsigned long)_stext_l2 &&
+		 addr <  (unsigned long)_etext_l2);
+}
+#define arch_is_kernel_text(addr) arch_is_kernel_text(addr)
+
+static inline int arch_is_kernel_data(unsigned long addr)
+{
+	return
+		(L1_DATA_A_LENGTH &&
+		 addr >= (unsigned long)_sdata_l1 &&
+		 addr <  (unsigned long)_ebss_l1)
+		||
+		(L1_DATA_B_LENGTH &&
+		 addr >= (unsigned long)_sdata_b_l1 &&
+		 addr <  (unsigned long)_ebss_b_l1)
+		||
+		(L2_LENGTH &&
+		 addr >= (unsigned long)_sdata_l2 &&
+		 addr <  (unsigned long)_ebss_l2);
+}
+#define arch_is_kernel_data(addr) arch_is_kernel_data(addr)
+
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/segment.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/segment.h
new file mode 100644
index 0000000..f8e1984
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/segment.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BFIN_SEGMENT_H
+#define _BFIN_SEGMENT_H
+
+#define KERNEL_DS   (0x5)
+#define USER_DS     (0x1)
+
+#endif				/* _BFIN_SEGMENT_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/smp.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/smp.h
new file mode 100644
index 0000000..9631598
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/smp.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *                          Philippe Gerum <rpm@xenomai.org>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BLACKFIN_SMP_H
+#define __ASM_BLACKFIN_SMP_H
+
+#include <linux/kernel.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/cache.h>
+#include <asm/blackfin.h>
+#include <mach/smp.h>
+
+#define raw_smp_processor_id()  blackfin_core_id()
+
+extern void bfin_relocate_coreb_l1_mem(void);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+
+#if defined(CONFIG_SMP) && defined(CONFIG_ICACHE_FLUSH_L1)
+asmlinkage void blackfin_icache_flush_range_l1(unsigned long *ptr);
+extern unsigned long blackfin_iflush_l1_entry[NR_CPUS];
+#endif
+
+struct corelock_slot {
+	int lock;
+};
+extern struct corelock_slot corelock;
+
+#ifdef __ARCH_SYNC_CORE_ICACHE
+extern unsigned long icache_invld_count[NR_CPUS];
+#endif
+#ifdef __ARCH_SYNC_CORE_DCACHE
+extern unsigned long dcache_invld_count[NR_CPUS];
+#endif
+
+void smp_icache_flush_range_others(unsigned long start,
+					unsigned long end);
+#ifdef CONFIG_HOTPLUG_CPU
+void coreb_die(void);
+void cpu_die(void);
+void platform_cpu_die(void);
+int __cpu_disable(void);
+int __cpu_die(unsigned int cpu);
+#endif
+
+void smp_timer_broadcast(const struct cpumask *mask);
+
+
+#endif /* !__ASM_BLACKFIN_SMP_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/spinlock.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/spinlock.h
new file mode 100644
index 0000000..f643143
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/spinlock.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_SPINLOCK_H
+#define __BFIN_SPINLOCK_H
+
+#ifndef CONFIG_SMP
+# include <asm-generic/spinlock.h>
+#else
+
+#include <linux/atomic.h>
+#include <asm/processor.h>
+#include <asm/barrier.h>
+
+asmlinkage int __raw_spin_is_locked_asm(volatile int *ptr);
+asmlinkage void __raw_spin_lock_asm(volatile int *ptr);
+asmlinkage int __raw_spin_trylock_asm(volatile int *ptr);
+asmlinkage void __raw_spin_unlock_asm(volatile int *ptr);
+asmlinkage void __raw_read_lock_asm(volatile int *ptr);
+asmlinkage int __raw_read_trylock_asm(volatile int *ptr);
+asmlinkage void __raw_read_unlock_asm(volatile int *ptr);
+asmlinkage void __raw_write_lock_asm(volatile int *ptr);
+asmlinkage int __raw_write_trylock_asm(volatile int *ptr);
+asmlinkage void __raw_write_unlock_asm(volatile int *ptr);
+
+static inline int arch_spin_is_locked(arch_spinlock_t *lock)
+{
+	return __raw_spin_is_locked_asm(&lock->lock);
+}
+
+static inline void arch_spin_lock(arch_spinlock_t *lock)
+{
+	__raw_spin_lock_asm(&lock->lock);
+}
+
+#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
+
+static inline int arch_spin_trylock(arch_spinlock_t *lock)
+{
+	return __raw_spin_trylock_asm(&lock->lock);
+}
+
+static inline void arch_spin_unlock(arch_spinlock_t *lock)
+{
+	__raw_spin_unlock_asm(&lock->lock);
+}
+
+static inline int arch_read_can_lock(arch_rwlock_t *rw)
+{
+	return __raw_uncached_fetch_asm(&rw->lock) > 0;
+}
+
+static inline int arch_write_can_lock(arch_rwlock_t *rw)
+{
+	return __raw_uncached_fetch_asm(&rw->lock) == RW_LOCK_BIAS;
+}
+
+static inline void arch_read_lock(arch_rwlock_t *rw)
+{
+	__raw_read_lock_asm(&rw->lock);
+}
+
+#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
+
+static inline int arch_read_trylock(arch_rwlock_t *rw)
+{
+	return __raw_read_trylock_asm(&rw->lock);
+}
+
+static inline void arch_read_unlock(arch_rwlock_t *rw)
+{
+	__raw_read_unlock_asm(&rw->lock);
+}
+
+static inline void arch_write_lock(arch_rwlock_t *rw)
+{
+	__raw_write_lock_asm(&rw->lock);
+}
+
+#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
+
+static inline int arch_write_trylock(arch_rwlock_t *rw)
+{
+	return __raw_write_trylock_asm(&rw->lock);
+}
+
+static inline void arch_write_unlock(arch_rwlock_t *rw)
+{
+	__raw_write_unlock_asm(&rw->lock);
+}
+
+#define arch_spin_relax(lock)  	cpu_relax()
+#define arch_read_relax(lock)	cpu_relax()
+#define arch_write_relax(lock)	cpu_relax()
+
+#endif
+
+#endif /*  !__BFIN_SPINLOCK_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/spinlock_types.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/spinlock_types.h
new file mode 100644
index 0000000..1a33608
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/spinlock_types.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_SPINLOCK_TYPES_H
+#define __ASM_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+#include <asm/rwlock.h>
+
+typedef struct {
+	volatile unsigned int lock;
+} arch_spinlock_t;
+
+#define __ARCH_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile unsigned int lock;
+} arch_rwlock_t;
+
+#define __ARCH_RW_LOCK_UNLOCKED		{ RW_LOCK_BIAS }
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/string.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/string.h
new file mode 100644
index 0000000..423c099
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/string.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BLACKFIN_STRING_H_
+#define _BLACKFIN_STRING_H_
+
+#include <linux/types.h>
+
+#ifdef __KERNEL__		/* only set these up for kernel code */
+
+#define __HAVE_ARCH_STRCPY
+extern char *strcpy(char *dest, const char *src);
+
+#define __HAVE_ARCH_STRNCPY
+extern char *strncpy(char *dest, const char *src, size_t n);
+
+#define __HAVE_ARCH_STRCMP
+extern int strcmp(const char *cs, const char *ct);
+
+#define __HAVE_ARCH_STRNCMP
+extern int strncmp(const char *cs, const char *ct, size_t count);
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *s, int c, size_t count);
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *d, const void *s, size_t count);
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *, const void *, __kernel_size_t);
+#define	__HAVE_ARCH_MEMCHR
+extern void *memchr(const void *s, int c, size_t n);
+#define	__HAVE_ARCH_MEMMOVE
+extern void *memmove(void *dest, const void *src, size_t count);
+
+#endif /*__KERNEL__*/
+#endif				/* _BLACKFIN_STRING_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/switch_to.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/switch_to.h
new file mode 100644
index 0000000..aaf671b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/switch_to.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *               Tony Kou (tonyko@lineo.ca)
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _BLACKFIN_SWITCH_TO_H
+#define _BLACKFIN_SWITCH_TO_H
+
+#define prepare_to_switch()     do { } while(0)
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.
+ */
+
+#include <asm/l1layout.h>
+#include <asm/mem_map.h>
+
+asmlinkage struct task_struct *resume(struct task_struct *prev, struct task_struct *next);
+
+#ifndef CONFIG_SMP
+#define switch_to(prev,next,last) \
+do {    \
+	memcpy (&task_thread_info(prev)->l1_task_info, L1_SCRATCH_TASK_INFO, \
+		sizeof *L1_SCRATCH_TASK_INFO); \
+	memcpy (L1_SCRATCH_TASK_INFO, &task_thread_info(next)->l1_task_info, \
+		sizeof *L1_SCRATCH_TASK_INFO); \
+	(last) = resume (prev, next);   \
+} while (0)
+#else
+#define switch_to(prev, next, last) \
+do {    \
+	(last) = resume(prev, next);   \
+} while (0)
+#endif
+
+#endif /* _BLACKFIN_SWITCH_TO_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/syscall.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/syscall.h
new file mode 100644
index 0000000..4921a48
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/syscall.h
@@ -0,0 +1,96 @@
+/*
+ * Magic syscall break down functions
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BLACKFIN_SYSCALL_H__
+#define __ASM_BLACKFIN_SYSCALL_H__
+
+/*
+ * Blackfin syscalls are simple:
+ *	enter:
+ *		p0: syscall number
+ *		r{0,1,2,3,4,5}: syscall args 0,1,2,3,4,5
+ *	exit:
+ *		r0: return/error value
+ */
+
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+static inline long
+syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+	return regs->p0;
+}
+
+static inline void
+syscall_rollback(struct task_struct *task, struct pt_regs *regs)
+{
+	regs->p0 = regs->orig_p0;
+}
+
+static inline long
+syscall_get_error(struct task_struct *task, struct pt_regs *regs)
+{
+	return IS_ERR_VALUE(regs->r0) ? regs->r0 : 0;
+}
+
+static inline long
+syscall_get_return_value(struct task_struct *task, struct pt_regs *regs)
+{
+	return regs->r0;
+}
+
+static inline void
+syscall_set_return_value(struct task_struct *task, struct pt_regs *regs,
+                         int error, long val)
+{
+	regs->r0 = error ? -error : val;
+}
+
+/**
+ *	syscall_get_arguments()
+ *	@task:   unused
+ *	@regs:   the register layout to extract syscall arguments from
+ *	@i:      first syscall argument to extract
+ *	@n:      number of syscall arguments to extract
+ *	@args:   array to return the syscall arguments in
+ *
+ * args[0] gets i'th argument, args[n - 1] gets the i+n-1'th argument
+ */
+static inline void
+syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
+                      unsigned int i, unsigned int n, unsigned long *args)
+{
+	/*
+	 * Assume the ptrace layout doesn't change -- r5 is first in memory,
+	 * then r4, ..., then r0.  So we simply reverse the ptrace register
+	 * array in memory to store into the args array.
+	 */
+	long *aregs = &regs->r0 - i;
+
+	BUG_ON(i > 5 || i + n > 6);
+
+	while (n--)
+		*args++ = *aregs--;
+}
+
+/* See syscall_get_arguments() comments */
+static inline void
+syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+                      unsigned int i, unsigned int n, const unsigned long *args)
+{
+	long *aregs = &regs->r0 - i;
+
+	BUG_ON(i > 5 || i + n > 6);
+
+	while (n--)
+		*aregs-- = *args++;
+}
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/thread_info.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/thread_info.h
new file mode 100644
index 0000000..2966b93
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/thread_info.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+#include <asm/entry.h>
+#include <asm/l1layout.h>
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+
+/* Thread Align Mask to reach to the top of the stack
+ * for any process
+ */
+#define ALIGN_PAGE_MASK		0xffffe000
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#define THREAD_SIZE_ORDER	1
+#define THREAD_SIZE		8192	/* 2 pages */
+#define STACK_WARN		(THREAD_SIZE/8)
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long mm_segment_t;
+
+/*
+ * low level task data.
+ * If you change this, change the TI_* offsets below to match.
+ */
+
+struct thread_info {
+	struct task_struct *task;	/* main task structure */
+	unsigned long flags;	/* low level flags */
+	int cpu;		/* cpu we're on */
+	int preempt_count;	/* 0 => preemptable, <0 => BUG */
+	mm_segment_t addr_limit;	/* address limit */
+#ifndef CONFIG_SMP
+	struct l1_scratch_task_info l1_task_info;
+#endif
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
+}
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* Given a task stack pointer, you can find its corresponding
+ * thread_info structure just by masking it to the THREAD_SIZE
+ * boundary (currently 8K as you can see above).
+ */
+__attribute_const__
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	__asm__("%0 = sp;" : "=da"(ti));
+	return (struct thread_info *)((long)ti & ~((long)THREAD_SIZE-1));
+}
+
+#endif				/* __ASSEMBLY__ */
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_MEMDIE		4	/* is terminating due to OOM killer */
+#define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
+#define TIF_IRQ_SYNC		7	/* sync pipeline stage */
+#define TIF_NOTIFY_RESUME	8	/* callback before returning to user */
+#define TIF_SINGLESTEP		9
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_IRQ_SYNC		(1<<TIF_IRQ_SYNC)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
+
+#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
+
+#endif				/* __KERNEL__ */
+
+#endif				/* _ASM_THREAD_INFO_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/time.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/time.h
new file mode 100644
index 0000000..9ca7db8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/time.h
@@ -0,0 +1,46 @@
+/*
+ * asm-blackfin/time.h:
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _ASM_BLACKFIN_TIME_H
+#define _ASM_BLACKFIN_TIME_H
+
+/*
+ * The way that the Blackfin core timer works is:
+ *  - CCLK is divided by a programmable 8-bit pre-scaler (TSCALE)
+ *  - Every time TSCALE ticks, a 32bit is counted down (TCOUNT)
+ *
+ * If you take the fastest clock (1ns, or 1GHz to make the math work easier)
+ *    10ms is 10,000,000 clock ticks, which fits easy into a 32-bit counter
+ *    (32 bit counter is 4,294,967,296ns or 4.2 seconds) so, we don't need
+ *    to use TSCALE, and program it to zero (which is pass CCLK through).
+ *    If you feel like using it, try to keep HZ * TIMESCALE to some
+ *    value that divides easy (like power of 2).
+ */
+
+#ifndef CONFIG_CPU_FREQ
+# define TIME_SCALE 1
+#else
+/*
+ * Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 .
+ * Whenever we change the Core Clock frequency changes we immediately
+ * adjust the Core Timer Presale Register. This way we don't lose time.
+ */
+#define TIME_SCALE 4
+
+# ifdef CONFIG_CYCLES_CLOCKSOURCE
+extern unsigned long long __bfin_cycles_off;
+extern unsigned int __bfin_cycles_mod;
+# endif
+#endif
+
+#if defined(CONFIG_TICKSOURCE_CORETMR)
+extern void bfin_coretmr_init(void);
+extern void bfin_coretmr_clockevent_init(void);
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/timex.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/timex.h
new file mode 100644
index 0000000..248aeb0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/timex.h
@@ -0,0 +1,23 @@
+/*
+ * asm-blackfin/timex.h: cpu cycles!
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _ASM_BLACKFIN_TIMEX_H
+#define _ASM_BLACKFIN_TIMEX_H
+
+#define CLOCK_TICK_RATE	1000000	/* Underlying HZ */
+
+typedef unsigned long long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+	unsigned long tmp, tmp2;
+	__asm__ __volatile__("%0 = cycles; %1 = cycles2;" : "=d"(tmp), "=d"(tmp2));
+	return tmp | ((cycles_t)tmp2 << 32);
+}
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/tlb.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/tlb.h
new file mode 100644
index 0000000..a74ae08
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/tlb.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BLACKFIN_TLB_H
+#define _BLACKFIN_TLB_H
+
+#define tlb_start_vma(tlb, vma)	do { } while (0)
+#define tlb_end_vma(tlb, vma)	do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address)	do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it
+ * fills up.
+ */
+#define tlb_flush(tlb)		flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif				/* _BLACKFIN_TLB_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/tlbflush.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/tlbflush.h
new file mode 100644
index 0000000..7c36868
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/tlbflush.h
@@ -0,0 +1,2 @@
+#include <asm-generic/tlbflush.h>
+#define flush_tlb_kernel_range(s, e) do { } while (0)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/trace.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/trace.h
new file mode 100644
index 0000000..33589a2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/trace.h
@@ -0,0 +1,106 @@
+/*
+ * header file for hardware trace functions
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BLACKFIN_TRACE_
+#define _BLACKFIN_TRACE_
+
+/* Normally, we use ON, but you can't turn on software expansion until
+ * interrupts subsystem is ready
+ */
+
+#define BFIN_TRACE_INIT ((CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION << 4) | 0x03)
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+#define BFIN_TRACE_ON   (BFIN_TRACE_INIT | (CONFIG_DEBUG_BFIN_HWTRACE_EXPAND << 2))
+#else
+#define BFIN_TRACE_ON   (BFIN_TRACE_INIT)
+#endif
+
+#ifndef __ASSEMBLY__
+extern unsigned long trace_buff_offset;
+extern unsigned long software_trace_buff[];
+#if defined(CONFIG_DEBUG_VERBOSE)
+extern void decode_address(char *buf, unsigned long address);
+extern bool get_instruction(unsigned int *val, unsigned short *address);
+#else
+static inline void decode_address(char *buf, unsigned long address) { }
+static inline bool get_instruction(unsigned int *val, unsigned short *address) { return false; }
+#endif
+
+/* Trace Macros for C files */
+
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+
+#define trace_buffer_init() bfin_write_TBUFCTL(BFIN_TRACE_INIT)
+
+#define trace_buffer_save(x) \
+	do { \
+		(x) = bfin_read_TBUFCTL(); \
+		bfin_write_TBUFCTL((x) & ~TBUFEN); \
+	} while (0)
+
+#define trace_buffer_restore(x) \
+	do { \
+		bfin_write_TBUFCTL((x));        \
+	} while (0)
+#else /* DEBUG_BFIN_HWTRACE_ON */
+
+#define trace_buffer_save(x)
+#define trace_buffer_restore(x)
+#endif /* CONFIG_DEBUG_BFIN_HWTRACE_ON */
+
+#else
+/* Trace Macros for Assembly files */
+
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+
+#define trace_buffer_stop(preg, dreg)	\
+	preg.L = LO(TBUFCTL);		\
+	preg.H = HI(TBUFCTL);		\
+	dreg = 0x1;			\
+	[preg] = dreg;
+
+#define trace_buffer_init(preg, dreg) \
+	preg.L = LO(TBUFCTL);         \
+	preg.H = HI(TBUFCTL);         \
+	dreg = BFIN_TRACE_INIT;       \
+	[preg] = dreg;
+
+#define trace_buffer_save(preg, dreg) \
+	preg.L = LO(TBUFCTL); \
+	preg.H = HI(TBUFCTL); \
+	dreg = [preg]; \
+	[--sp] = dreg; \
+	dreg = 0x1; \
+	[preg] = dreg;
+
+#define trace_buffer_restore(preg, dreg) \
+	preg.L = LO(TBUFCTL); \
+	preg.H = HI(TBUFCTL); \
+	dreg = [sp++]; \
+	[preg] = dreg;
+
+#else /* CONFIG_DEBUG_BFIN_HWTRACE_ON */
+
+#define trace_buffer_stop(preg, dreg)
+#define trace_buffer_init(preg, dreg)
+#define trace_buffer_save(preg, dreg)
+#define trace_buffer_restore(preg, dreg)
+
+#endif /* CONFIG_DEBUG_BFIN_HWTRACE_ON */
+
+#ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
+# define DEBUG_HWTRACE_SAVE(preg, dreg)    trace_buffer_save(preg, dreg)
+# define DEBUG_HWTRACE_RESTORE(preg, dreg) trace_buffer_restore(preg, dreg)
+#else
+# define DEBUG_HWTRACE_SAVE(preg, dreg)
+# define DEBUG_HWTRACE_RESTORE(preg, dreg)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif				/* _BLACKFIN_TRACE_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/traps.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/traps.h
new file mode 100644
index 0000000..cec771b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/traps.h
@@ -0,0 +1,131 @@
+/*
+ *  Copyright 2004-2009 Analog Devices Inc.
+ *                 2001 Lineo, Inc
+ *                        Tony Kou
+ *                 1993 Hamish Macdonald
+ *
+ * Licensed under the GPL-2
+ */
+
+#ifndef _BFIN_TRAPS_H
+#define _BFIN_TRAPS_H
+
+#define VEC_SYS		(0)
+#define VEC_EXCPT01	(1)
+#define VEC_EXCPT02	(2)
+#define VEC_EXCPT03	(3)
+#define VEC_EXCPT04	(4)
+#define VEC_EXCPT05	(5)
+#define VEC_EXCPT06	(6)
+#define VEC_EXCPT07	(7)
+#define VEC_EXCPT08	(8)
+#define VEC_EXCPT09	(9)
+#define VEC_EXCPT10	(10)
+#define VEC_EXCPT11	(11)
+#define VEC_EXCPT12	(12)
+#define VEC_EXCPT13	(13)
+#define VEC_EXCPT14	(14)
+#define VEC_EXCPT15	(15)
+#define VEC_STEP	(16)
+#define VEC_OVFLOW	(17)
+#define VEC_UNDEF_I	(33)
+#define VEC_ILGAL_I	(34)
+#define VEC_CPLB_VL	(35)
+#define VEC_MISALI_D	(36)
+#define VEC_UNCOV	(37)
+#define VEC_CPLB_M	(38)
+#define VEC_CPLB_MHIT	(39)
+#define VEC_WATCH	(40)
+#define VEC_ISTRU_VL	(41)	/*ADSP-BF535 only (MH) */
+#define VEC_MISALI_I	(42)
+#define VEC_CPLB_I_VL	(43)
+#define VEC_CPLB_I_M	(44)
+#define VEC_CPLB_I_MHIT	(45)
+#define VEC_ILL_RES	(46)	/* including unvalid supervisor mode insn */
+/* The hardware reserves (63) for future use - we use it to tell our
+ * normal exception handling code we have a hardware error
+ */
+#define VEC_HWERR	(63)
+
+#ifndef __ASSEMBLY__
+
+#define HWC_x2(level) \
+	"System MMR Error\n" \
+	level " - An error occurred due to an invalid access to an System MMR location\n" \
+	level "   Possible reason: a 32-bit register is accessed with a 16-bit instruction\n" \
+	level "   or a 16-bit register is accessed with a 32-bit instruction.\n"
+#define HWC_x3(level) \
+	"External Memory Addressing Error\n"
+#define EXC_0x04(level) \
+	"Unimplmented exception occurred\n" \
+	level " - Maybe you forgot to install a custom exception handler?\n"
+#define HWC_x12(level) \
+	"Performance Monitor Overflow\n"
+#define HWC_x18(level) \
+	"RAISE 5 instruction\n" \
+	level "    Software issued a RAISE 5 instruction to invoke the Hardware\n"
+#define HWC_default(level) \
+	 "Reserved\n"
+#define EXC_0x03(level) \
+	"Application stack overflow\n" \
+	level " - Please increase the stack size of the application using elf2flt -s option,\n" \
+	level "   and/or reduce the stack use of the application.\n"
+#define EXC_0x10(level) \
+	"Single step\n" \
+	level " - When the processor is in single step mode, every instruction\n" \
+	level "   generates an exception. Primarily used for debugging.\n"
+#define EXC_0x11(level) \
+	"Exception caused by a trace buffer full condition\n" \
+	level " - The processor takes this exception when the trace\n" \
+	level "   buffer overflows (only when enabled by the Trace Unit Control register).\n"
+#define EXC_0x21(level) \
+	"Undefined instruction\n" \
+	level " - May be used to emulate instructions that are not defined for\n" \
+	level "   a particular processor implementation.\n"
+#define EXC_0x22(level) \
+	"Illegal instruction combination\n" \
+	level " - See section for multi-issue rules in the Blackfin\n" \
+	level "   Processor Instruction Set Reference.\n"
+#define EXC_0x23(level) \
+	"Data access CPLB protection violation\n" \
+	level " - Attempted read or write to Supervisor resource,\n" \
+	level "   or illegal data memory access. \n"
+#define EXC_0x24(level) \
+	"Data access misaligned address violation\n" \
+	level " - Attempted misaligned data memory or data cache access.\n"
+#define EXC_0x25(level) \
+	"Unrecoverable event\n" \
+	level " - For example, an exception generated while processing a previous exception.\n"
+#define EXC_0x26(level) \
+	"Data access CPLB miss\n" \
+	level " - Used by the MMU to signal a CPLB miss on a data access.\n"
+#define EXC_0x27(level) \
+	"Data access multiple CPLB hits\n" \
+	level " - More than one CPLB entry matches data fetch address.\n"
+#define EXC_0x28(level) \
+	"Program Sequencer Exception caused by an emulation watchpoint match\n" \
+	level " - There is a watchpoint match, and one of the EMUSW\n" \
+	level "   bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n"
+#define EXC_0x2A(level) \
+	"Instruction fetch misaligned address violation\n" \
+	level " - Attempted misaligned instruction cache fetch.\n"
+#define EXC_0x2B(level) \
+	"CPLB protection violation\n" \
+	level " - Illegal instruction fetch access (memory protection violation).\n"
+#define EXC_0x2C(level) \
+	"Instruction fetch CPLB miss\n" \
+	level " - CPLB miss on an instruction fetch.\n"
+#define EXC_0x2D(level) \
+	"Instruction fetch multiple CPLB hits\n" \
+	level " - More than one CPLB entry matches instruction fetch address.\n"
+#define EXC_0x2E(level) \
+	"Illegal use of supervisor resource\n" \
+	level " - Attempted to use a Supervisor register or instruction from User mode.\n" \
+	level "   Supervisor resources are registers and instructions that are reserved\n" \
+	level "   for Supervisor use: Supervisor only registers, all MMRs, and Supervisor\n" \
+	level "   only instructions.\n"
+
+extern void double_fault_c(struct pt_regs *fp);
+
+#endif				/* __ASSEMBLY__ */
+#endif				/* _BFIN_TRAPS_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/uaccess.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/uaccess.h
new file mode 100644
index 0000000..45da4bc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/uaccess.h
@@ -0,0 +1,234 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ * Based on: include/asm-m68knommu/uaccess.h
+ */
+
+#ifndef __BLACKFIN_UACCESS_H
+#define __BLACKFIN_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+#include <asm/sections.h>
+
+#define get_ds()        (KERNEL_DS)
+#define get_fs()        (current_thread_info()->addr_limit)
+
+static inline void set_fs(mm_segment_t fs)
+{
+	current_thread_info()->addr_limit = fs;
+}
+
+#define segment_eq(a, b) ((a) == (b))
+
+#define access_ok(type, addr, size) _access_ok((unsigned long)(addr), (size))
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ */
+
+#ifndef CONFIG_ACCESS_CHECK
+static inline int _access_ok(unsigned long addr, unsigned long size) { return 1; }
+#else
+extern int _access_ok(unsigned long addr, unsigned long size);
+#endif
+
+#include <asm/extable.h>
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+#define put_user(x, p)						\
+	({							\
+		int _err = 0;					\
+		typeof(*(p)) _x = (x);				\
+		typeof(*(p)) __user *_p = (p);			\
+		if (!access_ok(VERIFY_WRITE, _p, sizeof(*(_p)))) {\
+			_err = -EFAULT;				\
+		}						\
+		else {						\
+		switch (sizeof (*(_p))) {			\
+		case 1:						\
+			__put_user_asm(_x, _p, B);		\
+			break;					\
+		case 2:						\
+			__put_user_asm(_x, _p, W);		\
+			break;					\
+		case 4:						\
+			__put_user_asm(_x, _p,  );		\
+			break;					\
+		case 8: {					\
+			long _xl, _xh;				\
+			_xl = ((__force long *)&_x)[0];		\
+			_xh = ((__force long *)&_x)[1];		\
+			__put_user_asm(_xl, ((__force long __user *)_p)+0, );\
+			__put_user_asm(_xh, ((__force long __user *)_p)+1, );\
+		} break;					\
+		default:					\
+			_err = __put_user_bad();		\
+			break;					\
+		}						\
+		}						\
+		_err;						\
+	})
+
+#define __put_user(x, p) put_user(x, p)
+static inline int bad_user_access_length(void)
+{
+	panic("bad_user_access_length");
+	return -1;
+}
+
+#define __put_user_bad() (printk(KERN_INFO "put_user_bad %s:%d %s\n",\
+                           __FILE__, __LINE__, __func__),\
+                           bad_user_access_length(), (-EFAULT))
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#define __ptr(x) ((unsigned long __force *)(x))
+
+#define __put_user_asm(x, p, bhw)			\
+	__asm__ (#bhw"[%1] = %0;\n\t"			\
+		 : /* no outputs */			\
+		 :"d" (x), "a" (__ptr(p)) : "memory")
+
+#define get_user(x, ptr)					\
+({								\
+	int _err = 0;						\
+	unsigned long _val = 0;					\
+	const typeof(*(ptr)) __user *_p = (ptr);		\
+	const size_t ptr_size = sizeof(*(_p));			\
+	if (likely(access_ok(VERIFY_READ, _p, ptr_size))) {	\
+		BUILD_BUG_ON(ptr_size >= 8);			\
+		switch (ptr_size) {				\
+		case 1:						\
+			__get_user_asm(_val, _p, B, (Z));	\
+			break;					\
+		case 2:						\
+			__get_user_asm(_val, _p, W, (Z));	\
+			break;					\
+		case 4:						\
+			__get_user_asm(_val, _p,  , );		\
+			break;					\
+		}						\
+	} else							\
+		_err = -EFAULT;					\
+	x = (__force typeof(*(ptr)))_val;			\
+	_err;							\
+})
+
+#define __get_user(x, p) get_user(x, p)
+
+#define __get_user_bad() (bad_user_access_length(), (-EFAULT))
+
+#define __get_user_asm(x, ptr, bhw, option)	\
+({						\
+	__asm__ __volatile__ (			\
+		"%0 =" #bhw "[%1]" #option ";"	\
+		: "=d" (x)			\
+		: "a" (__ptr(ptr)));		\
+})
+
+static inline unsigned long __must_check
+raw_copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	memcpy(to, (const void __force *)from, n);
+	return 0;
+}
+
+static inline unsigned long __must_check
+raw_copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	memcpy((void __force *)to, from, n);
+	SSYNC();
+	return 0;
+}
+
+#define INLINE_COPY_FROM_USER
+#define INLINE_COPY_TO_USER
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+static inline long __must_check
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	char *tmp;
+	if (!access_ok(VERIFY_READ, src, 1))
+		return -EFAULT;
+	strncpy(dst, (const char __force *)src, count);
+	for (tmp = dst; *tmp && count > 0; tmp++, count--) ;
+	return (tmp - dst);
+}
+
+/*
+ * Get the size of a string in user space.
+ *   src: The string to measure
+ *     n: The maximum valid length
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ * If the string is too long, returns a value greater than n.
+ */
+static inline long __must_check strnlen_user(const char __user *src, long n)
+{
+	if (!access_ok(VERIFY_READ, src, 1))
+		return 0;
+	return strnlen((const char __force *)src, n) + 1;
+}
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long __must_check
+__clear_user(void __user *to, unsigned long n)
+{
+	if (!access_ok(VERIFY_WRITE, to, n))
+		return n;
+	memset((void __force *)to, 0, n);
+	return 0;
+}
+
+#define clear_user(to, n) __clear_user(to, n)
+
+/* How to interpret these return values:
+ *	CORE:      can be accessed by core load or dma memcpy
+ *	CORE_ONLY: can only be accessed by core load
+ *	DMA:       can only be accessed by dma memcpy
+ *	IDMA:      can only be accessed by interprocessor dma memcpy (BF561)
+ *	ITEST:     can be accessed by isram memcpy or dma memcpy
+ */
+enum {
+	BFIN_MEM_ACCESS_CORE = 0,
+	BFIN_MEM_ACCESS_CORE_ONLY,
+	BFIN_MEM_ACCESS_DMA,
+	BFIN_MEM_ACCESS_IDMA,
+	BFIN_MEM_ACCESS_ITEST,
+};
+/**
+ *	bfin_mem_access_type() - what kind of memory access is required
+ *	@addr:   the address to check
+ *	@size:   number of bytes needed
+ *	@return: <0 is error, >=0 is BFIN_MEM_ACCESS_xxx enum (see above)
+ */
+int bfin_mem_access_type(unsigned long addr, unsigned long size);
+
+#endif				/* _BLACKFIN_UACCESS_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/unistd.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/unistd.h
new file mode 100644
index 0000000..c8c8ff9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/unistd.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+#ifndef __ASM_BFIN_UNISTD_H
+#define __ASM_BFIN_UNISTD_H
+
+#include <uapi/asm/unistd.h>
+
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_VFORK
+
+#endif				/* __ASM_BFIN_UNISTD_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/asm/vga.h b/src/kernel/linux/v4.14/arch/blackfin/include/asm/vga.h
new file mode 100644
index 0000000..89d82fd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/asm/vga.h
@@ -0,0 +1 @@
+#include <asm-generic/vga.h>
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/irq.h b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/irq.h
new file mode 100644
index 0000000..af9fc81
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/irq.h
@@ -0,0 +1,58 @@
+/*
+ * Common Blackfin IRQ definitions (i.e. the CEC)
+ *
+ * Copyright 2005-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _MACH_COMMON_IRQ_H_
+#define _MACH_COMMON_IRQ_H_
+
+/*
+ * Core events interrupt source definitions
+ *
+ *  Event Source       Event Name
+ *  Emulation          EMU            0  (highest priority)
+ *  Reset              RST            1
+ *  NMI                NMI            2
+ *  Exception          EVX            3
+ *  Reserved           --             4
+ *  Hardware Error     IVHW           5
+ *  Core Timer         IVTMR          6
+ *  Peripherals        IVG7           7
+ *  Peripherals        IVG8           8
+ *  Peripherals        IVG9           9
+ *  Peripherals        IVG10         10
+ *  Peripherals        IVG11         11
+ *  Peripherals        IVG12         12
+ *  Peripherals        IVG13         13
+ *  Softirq            IVG14         14
+ *  System Call        IVG15         15  (lowest priority)
+ */
+
+/* The ABSTRACT IRQ definitions */
+#define IRQ_EMU			0	/* Emulation */
+#define IRQ_RST			1	/* reset */
+#define IRQ_NMI			2	/* Non Maskable */
+#define IRQ_EVX			3	/* Exception */
+#define IRQ_UNUSED		4	/* - unused interrupt */
+#define IRQ_HWERR		5	/* Hardware Error */
+#define IRQ_CORETMR		6	/* Core timer */
+
+#define IVG7			7
+#define IVG8			8
+#define IVG9			9
+#define IVG10			10
+#define IVG11			11
+#define IVG12			12
+#define IVG13			13
+#define IVG14			14
+#define IVG15			15
+
+#define BFIN_IRQ(x)		((x) + IVG7)
+#define BFIN_SYSIRQ(x)		((x) - IVG7)
+
+#define NR_IRQS			(NR_MACH_IRQS + NR_SPARE_IRQS)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/pll.h b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/pll.h
new file mode 100644
index 0000000..382178b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/pll.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_COMMON_PLL_H
+#define _MACH_COMMON_PLL_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/blackfin.h>
+#include <asm/irqflags.h>
+
+#ifndef bfin_iwr_restore
+static inline void
+bfin_iwr_restore(unsigned long iwr0, unsigned long iwr1, unsigned long iwr2)
+{
+#ifdef SIC_IWR
+	bfin_write_SIC_IWR(iwr0);
+#else
+	bfin_write_SIC_IWR0(iwr0);
+# ifdef SIC_IWR1
+	bfin_write_SIC_IWR1(iwr1);
+# endif
+# ifdef SIC_IWR2
+	bfin_write_SIC_IWR2(iwr2);
+# endif
+#endif
+}
+#endif
+
+#ifndef bfin_iwr_save
+static inline void
+bfin_iwr_save(unsigned long niwr0, unsigned long niwr1, unsigned long niwr2,
+              unsigned long *iwr0, unsigned long *iwr1, unsigned long *iwr2)
+{
+#ifdef SIC_IWR
+	*iwr0 = bfin_read_SIC_IWR();
+#else
+	*iwr0 = bfin_read_SIC_IWR0();
+# ifdef SIC_IWR1
+	*iwr1 = bfin_read_SIC_IWR1();
+# endif
+# ifdef SIC_IWR2
+	*iwr2 = bfin_read_SIC_IWR2();
+# endif
+#endif
+	bfin_iwr_restore(niwr0, niwr1, niwr2);
+}
+#endif
+
+static inline void _bfin_write_pll_relock(u32 addr, unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1, iwr2;
+
+	if (val == bfin_read_PLL_CTL())
+		return;
+
+	flags = hard_local_irq_save();
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	bfin_iwr_save(IWR_ENABLE(0), 0, 0, &iwr0, &iwr1, &iwr2);
+
+	bfin_write16(addr, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_iwr_restore(iwr0, iwr1, iwr2);
+	hard_local_irq_restore(flags);
+}
+
+/* Writing to PLL_CTL initiates a PLL relock sequence */
+static inline void bfin_write_PLL_CTL(unsigned int val)
+{
+	_bfin_write_pll_relock(PLL_CTL, val);
+}
+
+/* Writing to VR_CTL initiates a PLL relock sequence */
+static inline void bfin_write_VR_CTL(unsigned int val)
+{
+	_bfin_write_pll_relock(VR_CTL, val);
+}
+
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-a.h b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-a.h
new file mode 100644
index 0000000..71bcd74
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-a.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Port A Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_A__
+#define __BFIN_PERIPHERAL_PORT_A__
+
+#define PA0		(1 << 0)
+#define PA1		(1 << 1)
+#define PA2		(1 << 2)
+#define PA3		(1 << 3)
+#define PA4		(1 << 4)
+#define PA5		(1 << 5)
+#define PA6		(1 << 6)
+#define PA7		(1 << 7)
+#define PA8		(1 << 8)
+#define PA9		(1 << 9)
+#define PA10		(1 << 10)
+#define PA11		(1 << 11)
+#define PA12		(1 << 12)
+#define PA13		(1 << 13)
+#define PA14		(1 << 14)
+#define PA15		(1 << 15)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-b.h b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-b.h
new file mode 100644
index 0000000..8013cc8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-b.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Port B Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_B__
+#define __BFIN_PERIPHERAL_PORT_B__
+
+#define PB0		(1 << 0)
+#define PB1		(1 << 1)
+#define PB2		(1 << 2)
+#define PB3		(1 << 3)
+#define PB4		(1 << 4)
+#define PB5		(1 << 5)
+#define PB6		(1 << 6)
+#define PB7		(1 << 7)
+#define PB8		(1 << 8)
+#define PB9		(1 << 9)
+#define PB10		(1 << 10)
+#define PB11		(1 << 11)
+#define PB12		(1 << 12)
+#define PB13		(1 << 13)
+#define PB14		(1 << 14)
+#define PB15		(1 << 15)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-c.h b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-c.h
new file mode 100644
index 0000000..94e7101
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-c.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Port C Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_C__
+#define __BFIN_PERIPHERAL_PORT_C__
+
+#define PC0		(1 << 0)
+#define PC1		(1 << 1)
+#define PC2		(1 << 2)
+#define PC3		(1 << 3)
+#define PC4		(1 << 4)
+#define PC5		(1 << 5)
+#define PC6		(1 << 6)
+#define PC7		(1 << 7)
+#define PC8		(1 << 8)
+#define PC9		(1 << 9)
+#define PC10		(1 << 10)
+#define PC11		(1 << 11)
+#define PC12		(1 << 12)
+#define PC13		(1 << 13)
+#define PC14		(1 << 14)
+#define PC15		(1 << 15)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-d.h b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-d.h
new file mode 100644
index 0000000..ba84a9f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-d.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Port D Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_D__
+#define __BFIN_PERIPHERAL_PORT_D__
+
+#define PD0		(1 << 0)
+#define PD1		(1 << 1)
+#define PD2		(1 << 2)
+#define PD3		(1 << 3)
+#define PD4		(1 << 4)
+#define PD5		(1 << 5)
+#define PD6		(1 << 6)
+#define PD7		(1 << 7)
+#define PD8		(1 << 8)
+#define PD9		(1 << 9)
+#define PD10		(1 << 10)
+#define PD11		(1 << 11)
+#define PD12		(1 << 12)
+#define PD13		(1 << 13)
+#define PD14		(1 << 14)
+#define PD15		(1 << 15)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-e.h b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-e.h
new file mode 100644
index 0000000..2264fb5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-e.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Port E Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_E__
+#define __BFIN_PERIPHERAL_PORT_E__
+
+#define PE0		(1 << 0)
+#define PE1		(1 << 1)
+#define PE2		(1 << 2)
+#define PE3		(1 << 3)
+#define PE4		(1 << 4)
+#define PE5		(1 << 5)
+#define PE6		(1 << 6)
+#define PE7		(1 << 7)
+#define PE8		(1 << 8)
+#define PE9		(1 << 9)
+#define PE10		(1 << 10)
+#define PE11		(1 << 11)
+#define PE12		(1 << 12)
+#define PE13		(1 << 13)
+#define PE14		(1 << 14)
+#define PE15		(1 << 15)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-f.h b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-f.h
new file mode 100644
index 0000000..2b8ca3a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-f.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Port F Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_F__
+#define __BFIN_PERIPHERAL_PORT_F__
+
+#define PF0		(1 << 0)
+#define PF1		(1 << 1)
+#define PF2		(1 << 2)
+#define PF3		(1 << 3)
+#define PF4		(1 << 4)
+#define PF5		(1 << 5)
+#define PF6		(1 << 6)
+#define PF7		(1 << 7)
+#define PF8		(1 << 8)
+#define PF9		(1 << 9)
+#define PF10		(1 << 10)
+#define PF11		(1 << 11)
+#define PF12		(1 << 12)
+#define PF13		(1 << 13)
+#define PF14		(1 << 14)
+#define PF15		(1 << 15)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-g.h b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-g.h
new file mode 100644
index 0000000..11ad917
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-g.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Port G Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_G__
+#define __BFIN_PERIPHERAL_PORT_G__
+
+#define PG0		(1 << 0)
+#define PG1		(1 << 1)
+#define PG2		(1 << 2)
+#define PG3		(1 << 3)
+#define PG4		(1 << 4)
+#define PG5		(1 << 5)
+#define PG6		(1 << 6)
+#define PG7		(1 << 7)
+#define PG8		(1 << 8)
+#define PG9		(1 << 9)
+#define PG10		(1 << 10)
+#define PG11		(1 << 11)
+#define PG12		(1 << 12)
+#define PG13		(1 << 13)
+#define PG14		(1 << 14)
+#define PG15		(1 << 15)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-h.h b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-h.h
new file mode 100644
index 0000000..511d088
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-h.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Port H Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_H__
+#define __BFIN_PERIPHERAL_PORT_H__
+
+#define PH0		(1 << 0)
+#define PH1		(1 << 1)
+#define PH2		(1 << 2)
+#define PH3		(1 << 3)
+#define PH4		(1 << 4)
+#define PH5		(1 << 5)
+#define PH6		(1 << 6)
+#define PH7		(1 << 7)
+#define PH8		(1 << 8)
+#define PH9		(1 << 9)
+#define PH10		(1 << 10)
+#define PH11		(1 << 11)
+#define PH12		(1 << 12)
+#define PH13		(1 << 13)
+#define PH14		(1 << 14)
+#define PH15		(1 << 15)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-i.h b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-i.h
new file mode 100644
index 0000000..21bbab1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-i.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Port I Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_I__
+#define __BFIN_PERIPHERAL_PORT_I__
+
+#define PI0		(1 << 0)
+#define PI1		(1 << 1)
+#define PI2		(1 << 2)
+#define PI3		(1 << 3)
+#define PI4		(1 << 4)
+#define PI5		(1 << 5)
+#define PI6		(1 << 6)
+#define PI7		(1 << 7)
+#define PI8		(1 << 8)
+#define PI9		(1 << 9)
+#define PI10		(1 << 10)
+#define PI11		(1 << 11)
+#define PI12		(1 << 12)
+#define PI13		(1 << 13)
+#define PI14		(1 << 14)
+#define PI15		(1 << 15)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-j.h b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-j.h
new file mode 100644
index 0000000..96a252b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/mach-common/ports-j.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Port J Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_J__
+#define __BFIN_PERIPHERAL_PORT_J__
+
+#define PJ0		(1 << 0)
+#define PJ1		(1 << 1)
+#define PJ2		(1 << 2)
+#define PJ3		(1 << 3)
+#define PJ4		(1 << 4)
+#define PJ5		(1 << 5)
+#define PJ6		(1 << 6)
+#define PJ7		(1 << 7)
+#define PJ8		(1 << 8)
+#define PJ9		(1 << 9)
+#define PJ10		(1 << 10)
+#define PJ11		(1 << 11)
+#define PJ12		(1 << 12)
+#define PJ13		(1 << 13)
+#define PJ14		(1 << 14)
+#define PJ15		(1 << 15)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/Kbuild b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/Kbuild
new file mode 100644
index 0000000..aa624b4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/Kbuild
@@ -0,0 +1,24 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
+generic-y += auxvec.h
+generic-y += bitsperlong.h
+generic-y += errno.h
+generic-y += ioctl.h
+generic-y += ipcbuf.h
+generic-y += kvm_para.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += setup.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += types.h
+generic-y += ucontext.h
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/bfin_sport.h b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/bfin_sport.h
new file mode 100644
index 0000000..86c36a2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/bfin_sport.h
@@ -0,0 +1,137 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * bfin_sport.h - interface to Blackfin SPORTs
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _UAPI__BFIN_SPORT_H__
+#define _UAPI__BFIN_SPORT_H__
+
+/* Sport mode: it can be set to TDM, i2s or others */
+#define NORM_MODE	0x0
+#define TDM_MODE	0x1
+#define I2S_MODE	0x2
+#define NDSO_MODE	0x3
+
+/* Data format, normal, a-law or u-law */
+#define NORM_FORMAT	0x0
+#define ALAW_FORMAT	0x2
+#define ULAW_FORMAT	0x3
+
+/* Function driver which use sport must initialize the structure */
+struct sport_config {
+	/* TDM (multichannels), I2S or other mode */
+	unsigned int mode:3;
+	unsigned int polled;	/* use poll instead of irq when set */
+
+	/* if TDM mode is selected, channels must be set */
+	int channels;	/* Must be in 8 units */
+	unsigned int frame_delay:4;	/* Delay between frame sync pulse and first bit */
+
+	/* I2S mode */
+	unsigned int right_first:1;	/* Right stereo channel first */
+
+	/* In mormal mode, the following item need to be set */
+	unsigned int lsb_first:1;	/* order of transmit or receive data */
+	unsigned int fsync:1;	/* Frame sync required */
+	unsigned int data_indep:1;	/* data independent frame sync generated */
+	unsigned int act_low:1;	/* Active low TFS */
+	unsigned int late_fsync:1;	/* Late frame sync */
+	unsigned int tckfe:1;
+	unsigned int sec_en:1;	/* Secondary side enabled */
+
+	/* Choose clock source */
+	unsigned int int_clk:1;	/* Internal or external clock */
+
+	/* If external clock is used, the following fields are ignored */
+	int serial_clk;
+	int fsync_clk;
+
+	unsigned int data_format:2;	/* Normal, u-law or a-law */
+
+	int word_len;		/* How length of the word in bits, 3-32 bits */
+	int dma_enabled;
+};
+
+/* Userspace interface */
+#define SPORT_IOC_MAGIC		'P'
+#define SPORT_IOC_CONFIG	_IOWR('P', 0x01, struct sport_config)
+#define SPORT_IOC_GET_SYSTEMCLOCK         _IOR('P', 0x02, unsigned long)
+#define SPORT_IOC_SET_BAUDRATE            _IOW('P', 0x03, unsigned long)
+
+
+/* SPORT_TCR1 Masks */
+#define TSPEN		0x0001	/* TX enable */
+#define ITCLK		0x0002	/* Internal TX Clock Select */
+#define TDTYPE		0x000C	/* TX Data Formatting Select */
+#define DTYPE_NORM	0x0000	/* Data Format Normal */
+#define DTYPE_ULAW	0x0008	/* Compand Using u-Law */
+#define DTYPE_ALAW	0x000C	/* Compand Using A-Law */
+#define TLSBIT		0x0010	/* TX Bit Order */
+#define ITFS		0x0200	/* Internal TX Frame Sync Select */
+#define TFSR		0x0400	/* TX Frame Sync Required Select */
+#define DITFS		0x0800	/* Data Independent TX Frame Sync Select */
+#define LTFS		0x1000	/* Low TX Frame Sync Select */
+#define LATFS		0x2000	/* Late TX Frame Sync Select */
+#define TCKFE		0x4000	/* TX Clock Falling Edge Select */
+
+/* SPORT_TCR2 Masks */
+#define SLEN		0x001F	/* SPORT TX Word Length (2 - 31) */
+#define DP_SLEN(x)	BFIN_DEPOSIT(SLEN, x)
+#define EX_SLEN(x)	BFIN_EXTRACT(SLEN, x)
+#define TXSE		0x0100	/* TX Secondary Enable */
+#define TSFSE		0x0200	/* TX Stereo Frame Sync Enable */
+#define TRFST		0x0400	/* TX Right-First Data Order */
+
+/* SPORT_RCR1 Masks */
+#define RSPEN		0x0001	/* RX enable */
+#define IRCLK		0x0002	/* Internal RX Clock Select */
+#define RDTYPE		0x000C	/* RX Data Formatting Select */
+/* DTYPE_* defined above */
+#define RLSBIT		0x0010	/* RX Bit Order */
+#define IRFS		0x0200	/* Internal RX Frame Sync Select */
+#define RFSR		0x0400	/* RX Frame Sync Required Select */
+#define LRFS		0x1000	/* Low RX Frame Sync Select */
+#define LARFS		0x2000	/* Late RX Frame Sync Select */
+#define RCKFE		0x4000	/* RX Clock Falling Edge Select */
+
+/* SPORT_RCR2 Masks */
+/* SLEN defined above */
+#define RXSE		0x0100	/* RX Secondary Enable */
+#define RSFSE		0x0200	/* RX Stereo Frame Sync Enable */
+#define RRFST		0x0400	/* Right-First Data Order */
+
+/* SPORT_STAT Masks */
+#define RXNE		0x0001	/* RX FIFO Not Empty Status */
+#define RUVF		0x0002	/* RX Underflow Status */
+#define ROVF		0x0004	/* RX Overflow Status */
+#define TXF		0x0008	/* TX FIFO Full Status */
+#define TUVF		0x0010	/* TX Underflow Status */
+#define TOVF		0x0020	/* TX Overflow Status */
+#define TXHRE		0x0040	/* TX Hold Register Empty */
+
+/* SPORT_MCMC1 Masks */
+#define SP_WOFF		0x03FF	/* Multichannel Window Offset Field */
+#define DP_SP_WOFF(x)	BFIN_DEPOSIT(SP_WOFF, x)
+#define EX_SP_WOFF(x)	BFIN_EXTRACT(SP_WOFF, x)
+#define SP_WSIZE	0xF000	/* Multichannel Window Size Field */
+#define DP_SP_WSIZE(x)	BFIN_DEPOSIT(SP_WSIZE, x)
+#define EX_SP_WSIZE(x)	BFIN_EXTRACT(SP_WSIZE, x)
+
+/* SPORT_MCMC2 Masks */
+#define MCCRM		0x0003	/* Multichannel Clock Recovery Mode */
+#define REC_BYPASS	0x0000	/* Bypass Mode (No Clock Recovery) */
+#define REC_2FROM4	0x0002	/* Recover 2 MHz Clock from 4 MHz Clock */
+#define REC_8FROM16	0x0003	/* Recover 8 MHz Clock from 16 MHz Clock */
+#define MCDTXPE		0x0004	/* Multichannel DMA Transmit Packing */
+#define MCDRXPE		0x0008	/* Multichannel DMA Receive Packing */
+#define MCMEN		0x0010	/* Multichannel Frame Mode Enable */
+#define FSDR		0x0080	/* Multichannel Frame Sync to Data Relationship */
+#define MFD		0xF000	/* Multichannel Frame Delay */
+#define DP_MFD(x)	BFIN_DEPOSIT(MFD, x)
+#define EX_MFD(x)	BFIN_EXTRACT(MFD, x)
+
+#endif /* _UAPI__BFIN_SPORT_H__ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/byteorder.h b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/byteorder.h
new file mode 100644
index 0000000..bcab667
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/byteorder.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI__BFIN_ASM_BYTEORDER_H
+#define _UAPI__BFIN_ASM_BYTEORDER_H
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _UAPI__BFIN_ASM_BYTEORDER_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/cachectl.h b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/cachectl.h
new file mode 100644
index 0000000..b5c86fb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/cachectl.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * based on the mips/cachectl.h
+ *
+ * Copyright 2010 Analog Devices Inc.
+ * Copyright (C) 1994, 1995, 1996 by Ralf Baechle
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _UAPI_ASM_CACHECTL
+#define _UAPI_ASM_CACHECTL
+
+/*
+ * Options for cacheflush system call
+ */
+#define	ICACHE	(1<<0)		/* flush instruction cache        */
+#define	DCACHE	(1<<1)		/* writeback and flush data cache */
+#define	BCACHE	(ICACHE|DCACHE)	/* flush both caches              */
+
+#endif /* _UAPI_ASM_CACHECTL */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/fcntl.h b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/fcntl.h
new file mode 100644
index 0000000..0b02954
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/fcntl.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _UAPI_BFIN_FCNTL_H
+#define _UAPI_BFIN_FCNTL_H
+
+#define O_DIRECTORY	 040000	/* must be a directory */
+#define O_NOFOLLOW	0100000	/* don't follow links */
+#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE	0400000
+
+#include <asm-generic/fcntl.h>
+
+#endif /* _UAPI_BFIN_FCNTL_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/fixed_code.h b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/fixed_code.h
new file mode 100644
index 0000000..707b921
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/fixed_code.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * This file defines the fixed addresses where userspace programs
+ * can find atomic code sequences.
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _UAPI__BFIN_ASM_FIXED_CODE_H__
+#define _UAPI__BFIN_ASM_FIXED_CODE_H__
+
+
+#ifndef CONFIG_PHY_RAM_BASE_ADDRESS
+#define CONFIG_PHY_RAM_BASE_ADDRESS	0x0
+#endif
+
+#define FIXED_CODE_START	(CONFIG_PHY_RAM_BASE_ADDRESS + 0x400)
+
+#define SIGRETURN_STUB		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x400)
+
+#define ATOMIC_SEQS_START	(CONFIG_PHY_RAM_BASE_ADDRESS + 0x410)
+
+#define ATOMIC_XCHG32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x410)
+#define ATOMIC_CAS32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x420)
+#define ATOMIC_ADD32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x430)
+#define ATOMIC_SUB32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x440)
+#define ATOMIC_IOR32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x450)
+#define ATOMIC_AND32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x460)
+#define ATOMIC_XOR32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x470)
+
+#define ATOMIC_SEQS_END		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x480)
+
+#define SAFE_USER_INSTRUCTION   (CONFIG_PHY_RAM_BASE_ADDRESS + 0x480)
+
+#define FIXED_CODE_END		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x490)
+
+#endif /* _UAPI__BFIN_ASM_FIXED_CODE_H__ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/ioctls.h b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/ioctls.h
new file mode 100644
index 0000000..422fee3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/ioctls.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI__ARCH_BFIN_IOCTLS_H__
+#define _UAPI__ARCH_BFIN_IOCTLS_H__
+
+#define FIOQSIZE	0x545E
+#include <asm-generic/ioctls.h>
+
+#endif /* _UAPI__ARCH_BFIN_IOCTLS_H__ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/poll.h b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/poll.h
new file mode 100644
index 0000000..8b094d4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/poll.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
+#ifndef _UAPI__BFIN_POLL_H
+#define _UAPI__BFIN_POLL_H
+
+#define POLLWRNORM	4 /* POLLOUT */
+#define POLLWRBAND	256
+
+#include <asm-generic/poll.h>
+
+#endif /* _UAPI__BFIN_POLL_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/posix_types.h b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/posix_types.h
new file mode 100644
index 0000000..8947c75
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/posix_types.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _UAPI__ARCH_BFIN_POSIX_TYPES_H
+#define _UAPI__ARCH_BFIN_POSIX_TYPES_H
+
+typedef unsigned short __kernel_mode_t;
+#define __kernel_mode_t __kernel_mode_t
+
+typedef unsigned int __kernel_ipc_pid_t;
+#define __kernel_ipc_pid_t __kernel_ipc_pid_t
+
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+#define __kernel_size_t __kernel_size_t
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+#define __kernel_old_uid_t __kernel_old_uid_t
+
+typedef unsigned short __kernel_old_dev_t;
+#define __kernel_old_dev_t __kernel_old_dev_t
+
+#include <asm-generic/posix_types.h>
+
+#endif /* _UAPI__ARCH_BFIN_POSIX_TYPES_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/ptrace.h b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..e4423d5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/ptrace.h
@@ -0,0 +1,171 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _UAPI_BFIN_PTRACE_H
+#define _UAPI_BFIN_PTRACE_H
+
+/*
+ * GCC defines register number like this:
+ * -----------------------------
+ *       0 - 7 are data registers R0-R7
+ *       8 - 15 are address registers P0-P7
+ *      16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3
+ *      32 - 33 A registers A0 & A1
+ *      34 -    status register
+ * -----------------------------
+ *
+ * We follows above, except:
+ *      32-33 --- Low 32-bit of A0&1
+ *      34-35 --- High 8-bit of A0&1
+ */
+
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+	long orig_pc;
+	long ipend;
+	long seqstat;
+	long rete;
+	long retn;
+	long retx;
+	long pc;		/* PC == RETI */
+	long rets;
+	long reserved;		/* Used as scratch during system calls */
+	long astat;
+	long lb1;
+	long lb0;
+	long lt1;
+	long lt0;
+	long lc1;
+	long lc0;
+	long a1w;
+	long a1x;
+	long a0w;
+	long a0x;
+	long b3;
+	long b2;
+	long b1;
+	long b0;
+	long l3;
+	long l2;
+	long l1;
+	long l0;
+	long m3;
+	long m2;
+	long m1;
+	long m0;
+	long i3;
+	long i2;
+	long i1;
+	long i0;
+	long usp;
+	long fp;
+	long p5;
+	long p4;
+	long p3;
+	long p2;
+	long p1;
+	long p0;
+	long r7;
+	long r6;
+	long r5;
+	long r4;
+	long r3;
+	long r2;
+	long r1;
+	long r0;
+	long orig_r0;
+	long orig_p0;
+	long syscfg;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13	/* ptrace signal  */
+
+#define PTRACE_GETFDPIC           31	/* get the ELF fdpic loadmap address */
+#define PTRACE_GETFDPIC_EXEC       0	/* [addr] request the executable loadmap */
+#define PTRACE_GETFDPIC_INTERP     1	/* [addr] request the interpreter loadmap */
+
+#define PS_S  (0x0002)
+
+
+#endif				/* __ASSEMBLY__ */
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ */
+
+#define PT_R0 204
+#define PT_R1 200
+#define PT_R2 196
+#define PT_R3 192
+#define PT_R4 188
+#define PT_R5 184
+#define PT_R6 180
+#define PT_R7 176
+#define PT_P0 172
+#define PT_P1 168
+#define PT_P2 164
+#define PT_P3 160
+#define PT_P4 156
+#define PT_P5 152
+#define PT_FP 148
+#define PT_USP 144
+#define PT_I0 140
+#define PT_I1 136
+#define PT_I2 132
+#define PT_I3 128
+#define PT_M0 124
+#define PT_M1 120
+#define PT_M2 116
+#define PT_M3 112
+#define PT_L0 108
+#define PT_L1 104
+#define PT_L2 100
+#define PT_L3 96
+#define PT_B0 92
+#define PT_B1 88
+#define PT_B2 84
+#define PT_B3 80
+#define PT_A0X 76
+#define PT_A0W 72
+#define PT_A1X 68
+#define PT_A1W 64
+#define PT_LC0 60
+#define PT_LC1 56
+#define PT_LT0 52
+#define PT_LT1 48
+#define PT_LB0 44
+#define PT_LB1 40
+#define PT_ASTAT 36
+#define PT_RESERVED 32
+#define PT_RETS 28
+#define PT_PC 24
+#define PT_RETX 20
+#define PT_RETN 16
+#define PT_RETE 12
+#define PT_SEQSTAT 8
+#define PT_IPEND 4
+
+#define PT_ORIG_R0 208
+#define PT_ORIG_P0 212
+#define PT_SYSCFG 216
+#define PT_TEXT_ADDR 220
+#define PT_TEXT_END_ADDR 224
+#define PT_DATA_ADDR 228
+#define PT_FDPIC_EXEC 232
+#define PT_FDPIC_INTERP 236
+
+#define PT_LAST_PSEUDO PT_FDPIC_INTERP
+
+#endif /* _UAPI_BFIN_PTRACE_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/sigcontext.h b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/sigcontext.h
new file mode 100644
index 0000000..66b4d32
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/sigcontext.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _UAPI_ASM_BLACKFIN_SIGCONTEXT_H
+#define _UAPI_ASM_BLACKFIN_SIGCONTEXT_H
+
+/* Add new entries at the end of the structure only.  */
+struct sigcontext {
+	unsigned long sc_r0;
+	unsigned long sc_r1;
+	unsigned long sc_r2;
+	unsigned long sc_r3;
+	unsigned long sc_r4;
+	unsigned long sc_r5;
+	unsigned long sc_r6;
+	unsigned long sc_r7;
+	unsigned long sc_p0;
+	unsigned long sc_p1;
+	unsigned long sc_p2;
+	unsigned long sc_p3;
+	unsigned long sc_p4;
+	unsigned long sc_p5;
+	unsigned long sc_usp;
+	unsigned long sc_a0w;
+	unsigned long sc_a1w;
+	unsigned long sc_a0x;
+	unsigned long sc_a1x;
+	unsigned long sc_astat;
+	unsigned long sc_rets;
+	unsigned long sc_pc;
+	unsigned long sc_retx;
+	unsigned long sc_fp;
+	unsigned long sc_i0;
+	unsigned long sc_i1;
+	unsigned long sc_i2;
+	unsigned long sc_i3;
+	unsigned long sc_m0;
+	unsigned long sc_m1;
+	unsigned long sc_m2;
+	unsigned long sc_m3;
+	unsigned long sc_l0;
+	unsigned long sc_l1;
+	unsigned long sc_l2;
+	unsigned long sc_l3;
+	unsigned long sc_b0;
+	unsigned long sc_b1;
+	unsigned long sc_b2;
+	unsigned long sc_b3;
+	unsigned long sc_lc0;
+	unsigned long sc_lc1;
+	unsigned long sc_lt0;
+	unsigned long sc_lt1;
+	unsigned long sc_lb0;
+	unsigned long sc_lb1;
+	unsigned long sc_seqstat;
+};
+
+#endif /* _UAPI_ASM_BLACKFIN_SIGCONTEXT_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/siginfo.h b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/siginfo.h
new file mode 100644
index 0000000..b1db506
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/siginfo.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _UAPI_BFIN_SIGINFO_H
+#define _UAPI_BFIN_SIGINFO_H
+
+#include <linux/types.h>
+#include <asm-generic/siginfo.h>
+
+#define UID16_SIGINFO_COMPAT_NEEDED
+
+#define si_uid16	_sifields._kill._uid
+
+#define ILL_ILLPARAOP	2	/* illegal opcode combine ********** */
+#define ILL_ILLEXCPT	4	/* unrecoverable exception ********** */
+#define ILL_CPLB_VI	9	/* D/I CPLB protect violation ******** */
+#define ILL_CPLB_MISS	10	/* D/I CPLB miss ******** */
+#define ILL_CPLB_MULHIT	11	/* D/I CPLB multiple hit ******** */
+#undef NSIGILL
+#define NSIGILL         11
+
+/*
+ * SIGBUS si_codes
+ */
+#define BUS_OPFETCH	4	/* error from instruction fetch ******** */
+#undef NSIGBUS
+#define NSIGBUS		4
+
+/*
+ * SIGTRAP si_codes
+ */
+#define TRAP_STEP	1	/* single-step breakpoint************* */
+#define TRAP_TRACEFLOW	2	/* trace buffer overflow ************* */
+#define TRAP_WATCHPT	3	/* watchpoint match      ************* */
+#define TRAP_ILLTRAP	4	/* illegal trap          ************* */
+#undef NSIGTRAP
+#define NSIGTRAP	4
+
+/*
+ * SIGSEGV si_codes
+ */
+#define SEGV_STACKFLOW	3	/* stack overflow */
+#undef NSIGSEGV
+#define NSIGSEGV	3
+
+#endif /* _UAPI_BFIN_SIGINFO_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/signal.h b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/signal.h
new file mode 100644
index 0000000..f8e3b99
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/signal.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_BLACKFIN_SIGNAL_H
+#define _UAPI_BLACKFIN_SIGNAL_H
+
+#define SA_RESTORER 0x04000000
+#include <asm-generic/signal.h>
+
+#endif /* _UAPI_BLACKFIN_SIGNAL_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/stat.h b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/stat.h
new file mode 100644
index 0000000..458959d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/stat.h
@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef _UAPI_BFIN_STAT_H
+#define _UAPI_BFIN_STAT_H
+
+struct stat {
+	unsigned short st_dev;
+	unsigned short __pad1;
+	unsigned long st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned short __pad2;
+	unsigned long st_size;
+	unsigned long st_blksize;
+	unsigned long st_blocks;
+	unsigned long st_atime;
+	unsigned long __unused1;
+	unsigned long st_mtime;
+	unsigned long __unused2;
+	unsigned long st_ctime;
+	unsigned long __unused3;
+	unsigned long __unused4;
+	unsigned long __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long st_dev;
+	unsigned char __pad1[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long __st_ino;
+
+	unsigned int st_mode;
+	unsigned int st_nlink;
+
+	unsigned long st_uid;
+	unsigned long st_gid;
+
+	unsigned long long st_rdev;
+	unsigned char __pad2[4];
+
+	long long st_size;
+	unsigned long st_blksize;
+
+	long long st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long st_atime;
+	unsigned long st_atime_nsec;
+
+	unsigned long st_mtime;
+	unsigned long st_mtime_nsec;
+
+	unsigned long st_ctime;
+	unsigned long st_ctime_nsec;
+
+	unsigned long long st_ino;
+};
+
+#endif /* _UAPI_BFIN_STAT_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/swab.h b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/swab.h
new file mode 100644
index 0000000..d343793
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/swab.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _UAPI_BLACKFIN_SWAB_H
+#define _UAPI_BLACKFIN_SWAB_H
+
+#include <linux/types.h>
+#include <asm-generic/swab.h>
+
+#ifdef __GNUC__
+
+static __inline__ __attribute_const__ __u32 __arch_swahb32(__u32 xx)
+{
+	__u32 tmp;
+	__asm__("%1 = %0 >> 8 (V);\n\t"
+		"%0 = %0 << 8 (V);\n\t"
+		"%0 = %0 | %1;\n\t"
+		: "+d"(xx), "=&d"(tmp));
+	return xx;
+}
+#define __arch_swahb32 __arch_swahb32
+
+static __inline__ __attribute_const__ __u32 __arch_swahw32(__u32 xx)
+{
+	__u32 rv;
+	__asm__("%0 = PACK(%1.L, %1.H);\n\t": "=d"(rv): "d"(xx));
+	return rv;
+}
+#define __arch_swahw32 __arch_swahw32
+
+static __inline__ __attribute_const__ __u32 __arch_swab32(__u32 xx)
+{
+	return __arch_swahb32(__arch_swahw32(xx));
+}
+#define __arch_swab32 __arch_swab32
+
+static __inline__ __attribute_const__ __u16 __arch_swab16(__u16 xx)
+{
+	__u32 xw = xx;
+	__asm__("%0 <<= 8;\n	%0.L = %0.L + %0.H (NS);\n": "+d"(xw));
+	return (__u16)xw;
+}
+#define __arch_swab16 __arch_swab16
+
+#endif /* __GNUC__ */
+
+#endif /* _UAPI_BLACKFIN_SWAB_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/unistd.h b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/unistd.h
new file mode 100644
index 0000000..2d392c0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/include/uapi/asm/unistd.h
@@ -0,0 +1,448 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _UAPI__ASM_BFIN_UNISTD_H
+#define _UAPI__ASM_BFIN_UNISTD_H
+/*
+ * This file contains the system call numbers.
+ */
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+				/* 2 __NR_fork not supported on nommu */
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+				/* 7 __NR_waitpid obsolete */
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+				/* 17 __NR_break obsolete */
+				/* 18 __NR_oldstat obsolete */
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+				/* 22 __NR_umount obsolete */
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+				/* 28 __NR_oldfstat obsolete */
+#define __NR_pause		 29
+				/* 30 __NR_utime obsolete */
+				/* 31 __NR_stty obsolete */
+				/* 32 __NR_gtty obsolete */
+#define __NR_access		 33
+#define __NR_nice		 34
+				/* 35 __NR_ftime obsolete */
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+				/* 44 __NR_prof obsolete */
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+				/* 48 __NR_signal obsolete */
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+				/* 53 __NR_lock obsolete */
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+				/* 56 __NR_mpx obsolete */
+#define __NR_setpgid		 57
+				/* 58 __NR_ulimit obsolete */
+				/* 59 __NR_oldolduname obsolete */
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+				/* 67 __NR_sigaction obsolete */
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+				/* 72 __NR_sigsuspend obsolete */
+				/* 73 __NR_sigpending obsolete */
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+				/* 76 __NR_old_getrlimit obsolete */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+				/* 82 __NR_select obsolete */
+#define __NR_symlink		 83
+				/* 84 __NR_oldlstat obsolete */
+#define __NR_readlink		 85
+				/* 86 __NR_uselib obsolete */
+				/* 87 __NR_swapon obsolete */
+#define __NR_reboot		 88
+				/* 89 __NR_readdir obsolete */
+				/* 90 __NR_mmap obsolete */
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+				/* 98 __NR_profil obsolete */
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+				/* 101 __NR_ioperm */
+				/* 102 __NR_socketcall obsolete */
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+				/* 109 __NR_olduname obsolete */
+				/* 110 __NR_iopl obsolete */
+#define __NR_vhangup		111
+				/* 112 __NR_idle obsolete */
+				/* 113 __NR_vm86old */
+#define __NR_wait4		114
+				/* 115 __NR_swapoff obsolete */
+#define __NR_sysinfo		116
+				/* 117 __NR_ipc oboslete */
+#define __NR_fsync		118
+				/* 119 __NR_sigreturn obsolete */
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+				/* 123 __NR_modify_ldt obsolete */
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+				/* 126 __NR_sigprocmask obsolete */
+				/* 127 __NR_create_module obsolete */
+#define __NR_init_module	128
+#define __NR_delete_module	129
+				/* 130 __NR_get_kernel_syms obsolete */
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+				/* 135 was sysfs */
+#define __NR_personality	136
+				/* 137 __NR_afs_syscall */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+				/* 142 __NR__newselect obsolete */
+#define __NR_flock		143
+				/* 144 __NR_msync obsolete */
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+				/* 150 __NR_mlock */
+				/* 151 __NR_munlock */
+				/* 152 __NR_mlockall */
+				/* 153 __NR_munlockall */
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+				/* 166 __NR_vm86 */
+				/* 167 __NR_query_module */
+				/* 168 __NR_poll */
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl		172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread		180
+#define __NR_pwrite		181
+#define __NR_lchown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+				/* 188 __NR_getpmsg */
+				/* 189 __NR_putpmsg */
+#define __NR_vfork		190
+#define __NR_getrlimit		191
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_chown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_lchown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+				/* 218 __NR_mincore */
+				/* 219 __NR_madvise */
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+				/* 222 reserved for TUX */
+				/* 223 reserved for TUX */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+				/* 243 __NR_set_thread_area */
+				/* 244 __NR_get_thread_area */
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+				/* 250 __NR_alloc_hugepages */
+				/* 251 __NR_free_hugepages */
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie     253
+#define __NR_bfin_spinlock      254
+
+#define __NR_epoll_create	255
+#define __NR_epoll_ctl		256
+#define __NR_epoll_wait		257
+				/* 258 __NR_remap_file_pages */
+#define __NR_set_tid_address	259
+#define __NR_timer_create	260
+#define __NR_timer_settime	261
+#define __NR_timer_gettime	262
+#define __NR_timer_getoverrun	263
+#define __NR_timer_delete	264
+#define __NR_clock_settime	265
+#define __NR_clock_gettime	266
+#define __NR_clock_getres	267
+#define __NR_clock_nanosleep	268
+#define __NR_statfs64		269
+#define __NR_fstatfs64		270
+#define __NR_tgkill		271
+#define __NR_utimes		272
+#define __NR_fadvise64_64	273
+				/* 274 __NR_vserver */
+				/* 275 __NR_mbind */
+				/* 276 __NR_get_mempolicy */
+				/* 277 __NR_set_mempolicy */
+#define __NR_mq_open 		278
+#define __NR_mq_unlink		279
+#define __NR_mq_timedsend	280
+#define __NR_mq_timedreceive	281
+#define __NR_mq_notify		282
+#define __NR_mq_getsetattr	283
+#define __NR_kexec_load		284
+#define __NR_waitid		285
+#define __NR_add_key		286
+#define __NR_request_key	287
+#define __NR_keyctl		288
+#define __NR_ioprio_set		289
+#define __NR_ioprio_get		290
+#define __NR_inotify_init	291
+#define __NR_inotify_add_watch	292
+#define __NR_inotify_rm_watch	293
+				/* 294 __NR_migrate_pages */
+#define __NR_openat		295
+#define __NR_mkdirat		296
+#define __NR_mknodat		297
+#define __NR_fchownat		298
+#define __NR_futimesat		299
+#define __NR_fstatat64		300
+#define __NR_unlinkat		301
+#define __NR_renameat		302
+#define __NR_linkat		303
+#define __NR_symlinkat		304
+#define __NR_readlinkat		305
+#define __NR_fchmodat		306
+#define __NR_faccessat		307
+#define __NR_pselect6		308
+#define __NR_ppoll		309
+#define __NR_unshare		310
+
+/* Blackfin private syscalls */
+#define __NR_sram_alloc		311
+#define __NR_sram_free		312
+#define __NR_dma_memcpy		313
+
+/* socket syscalls */
+#define __NR_accept		314
+#define __NR_bind		315
+#define __NR_connect		316
+#define __NR_getpeername	317
+#define __NR_getsockname	318
+#define __NR_getsockopt		319
+#define __NR_listen		320
+#define __NR_recv		321
+#define __NR_recvfrom		322
+#define __NR_recvmsg		323
+#define __NR_send		324
+#define __NR_sendmsg		325
+#define __NR_sendto		326
+#define __NR_setsockopt		327
+#define __NR_shutdown		328
+#define __NR_socket		329
+#define __NR_socketpair		330
+
+/* sysv ipc syscalls */
+#define __NR_semctl		331
+#define __NR_semget		332
+#define __NR_semop		333
+#define __NR_msgctl		334
+#define __NR_msgget		335
+#define __NR_msgrcv		336
+#define __NR_msgsnd		337
+#define __NR_shmat		338
+#define __NR_shmctl		339
+#define __NR_shmdt		340
+#define __NR_shmget		341
+
+#define __NR_splice		342
+#define __NR_sync_file_range	343
+#define __NR_tee		344
+#define __NR_vmsplice		345
+
+#define __NR_epoll_pwait	346
+#define __NR_utimensat		347
+#define __NR_signalfd		348
+#define __NR_timerfd_create	349
+#define __NR_eventfd		350
+#define __NR_pread64		351
+#define __NR_pwrite64		352
+#define __NR_fadvise64		353
+#define __NR_set_robust_list	354
+#define __NR_get_robust_list	355
+#define __NR_fallocate		356
+#define __NR_semtimedop		357
+#define __NR_timerfd_settime	358
+#define __NR_timerfd_gettime	359
+#define __NR_signalfd4		360
+#define __NR_eventfd2		361
+#define __NR_epoll_create1	362
+#define __NR_dup3		363
+#define __NR_pipe2		364
+#define __NR_inotify_init1	365
+#define __NR_preadv		366
+#define __NR_pwritev		367
+#define __NR_rt_tgsigqueueinfo	368
+#define __NR_perf_event_open	369
+#define __NR_recvmmsg		370
+#define __NR_fanotify_init	371
+#define __NR_fanotify_mark	372
+#define __NR_prlimit64		373
+#define __NR_cacheflush		374
+#define __NR_name_to_handle_at	375
+#define __NR_open_by_handle_at	376
+#define __NR_clock_adjtime	377
+#define __NR_syncfs		378
+#define __NR_setns		379
+#define __NR_sendmmsg		380
+#define __NR_process_vm_readv	381
+#define __NR_process_vm_writev	382
+#define __NR_kcmp		383
+#define __NR_finit_module	384
+#define __NR_sched_setattr	385
+#define __NR_sched_getattr	386
+#define __NR_renameat2		387
+#define __NR_seccomp		388
+#define __NR_getrandom		389
+#define __NR_memfd_create	390
+#define __NR_bpf		391
+#define __NR_execveat		392
+
+#define __NR_syscall		393  /* For internal using, not implemented */
+#define NR_syscalls		__NR_syscall
+
+/* Old optional stuff no one actually uses */
+#define __IGNORE_sysfs
+#define __IGNORE_uselib
+
+/* Implement the newer interfaces */
+#define __IGNORE_mmap
+#define __IGNORE_poll
+#define __IGNORE_select
+#define __IGNORE_utime
+
+/* Not relevant on no-mmu */
+#define __IGNORE_swapon
+#define __IGNORE_swapoff
+#define __IGNORE_msync
+#define __IGNORE_mlock
+#define __IGNORE_munlock
+#define __IGNORE_mlockall
+#define __IGNORE_munlockall
+#define __IGNORE_mincore
+#define __IGNORE_madvise
+#define __IGNORE_remap_file_pages
+#define __IGNORE_mbind
+#define __IGNORE_get_mempolicy
+#define __IGNORE_set_mempolicy
+#define __IGNORE_migrate_pages
+#define __IGNORE_move_pages
+#define __IGNORE_getcpu
+
+
+#endif /* _UAPI__ASM_BFIN_UNISTD_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/.gitignore b/src/kernel/linux/v4.14/arch/blackfin/kernel/.gitignore
new file mode 100644
index 0000000..c5f676c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/Makefile b/src/kernel/linux/v4.14/arch/blackfin/kernel/Makefile
new file mode 100644
index 0000000..1580791
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/Makefile
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# arch/blackfin/kernel/Makefile
+#
+
+extra-y := vmlinux.lds
+
+obj-y := \
+	entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
+	sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \
+	fixed_code.o reboot.o bfin_dma.o \
+	exception.o dumpstack.o
+
+ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y)
+    obj-y += time-ts.o
+else
+    obj-y += time.o
+endif
+
+obj-$(CONFIG_GPIO_ADI)               += bfin_gpio.o
+obj-$(CONFIG_DYNAMIC_FTRACE)         += ftrace.o
+obj-$(CONFIG_FUNCTION_TRACER)        += ftrace-entry.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER)  += ftrace.o
+CFLAGS_REMOVE_ftrace.o = -pg
+
+obj-$(CONFIG_IPIPE)                  += ipipe.o
+obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
+obj-$(CONFIG_CPLB_INFO)              += cplbinfo.o
+obj-$(CONFIG_MODULES)                += module.o
+obj-$(CONFIG_KGDB)                   += kgdb.o
+obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
+obj-$(CONFIG_NMI_WATCHDOG)           += nmi.o
+obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
+obj-$(CONFIG_EARLY_PRINTK)           += shadow_console.o
+obj-$(CONFIG_STACKTRACE)             += stacktrace.o
+obj-$(CONFIG_DEBUG_VERBOSE)          += trace.o
+obj-$(CONFIG_BFIN_PSEUDODBG_INSNS)   += pseudodbg.o
+obj-$(CONFIG_PERF_EVENTS)            += perf_event.o
+
+# the kgdb test puts code into L2 and without linker
+# relaxation, we need to force long calls to/from it
+CFLAGS_kgdb_test.o := -mlong-calls
+
+obj-$(CONFIG_DEBUG_MMRS)             += debug-mmrs.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/asm-offsets.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/asm-offsets.c
new file mode 100644
index 0000000..486560a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/asm-offsets.c
@@ -0,0 +1,164 @@
+/*
+ * generate definitions needed by assembly language modules
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <linux/irq.h>
+#include <linux/thread_info.h>
+#include <linux/kbuild.h>
+#include <asm/pda.h>
+
+int main(void)
+{
+	/* offsets into the task struct */
+	DEFINE(TASK_STATE, offsetof(struct task_struct, state));
+	DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
+	DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
+	DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
+	DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+	DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack));
+	DEFINE(TASK_MM, offsetof(struct task_struct, mm));
+	DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+	DEFINE(TASK_SIGPENDING, offsetof(struct task_struct, pending));
+
+	/* offsets into the irq_cpustat_t struct */
+	DEFINE(CPUSTAT_SOFTIRQ_PENDING,
+	       offsetof(irq_cpustat_t, __softirq_pending));
+
+	/* offsets into the thread struct */
+	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
+	DEFINE(THREAD_USP, offsetof(struct thread_struct, usp));
+	DEFINE(THREAD_SR, offsetof(struct thread_struct, seqstat));
+	DEFINE(PT_SR, offsetof(struct thread_struct, seqstat));
+	DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0));
+	DEFINE(THREAD_PC, offsetof(struct thread_struct, pc));
+	DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE);
+
+	/* offsets in thread_info struct */
+	OFFSET(TI_TASK, thread_info, task);
+	OFFSET(TI_FLAGS, thread_info, flags);
+	OFFSET(TI_CPU, thread_info, cpu);
+	OFFSET(TI_PREEMPT, thread_info, preempt_count);
+
+	/* offsets into the pt_regs */
+	DEFINE(PT_ORIG_R0, offsetof(struct pt_regs, orig_r0));
+	DEFINE(PT_ORIG_P0, offsetof(struct pt_regs, orig_p0));
+	DEFINE(PT_ORIG_PC, offsetof(struct pt_regs, orig_pc));
+	DEFINE(PT_R0, offsetof(struct pt_regs, r0));
+	DEFINE(PT_R1, offsetof(struct pt_regs, r1));
+	DEFINE(PT_R2, offsetof(struct pt_regs, r2));
+	DEFINE(PT_R3, offsetof(struct pt_regs, r3));
+	DEFINE(PT_R4, offsetof(struct pt_regs, r4));
+	DEFINE(PT_R5, offsetof(struct pt_regs, r5));
+	DEFINE(PT_R6, offsetof(struct pt_regs, r6));
+	DEFINE(PT_R7, offsetof(struct pt_regs, r7));
+
+	DEFINE(PT_P0, offsetof(struct pt_regs, p0));
+	DEFINE(PT_P1, offsetof(struct pt_regs, p1));
+	DEFINE(PT_P2, offsetof(struct pt_regs, p2));
+	DEFINE(PT_P3, offsetof(struct pt_regs, p3));
+	DEFINE(PT_P4, offsetof(struct pt_regs, p4));
+	DEFINE(PT_P5, offsetof(struct pt_regs, p5));
+
+	DEFINE(PT_FP, offsetof(struct pt_regs, fp));
+	DEFINE(PT_USP, offsetof(struct pt_regs, usp));
+	DEFINE(PT_I0, offsetof(struct pt_regs, i0));
+	DEFINE(PT_I1, offsetof(struct pt_regs, i1));
+	DEFINE(PT_I2, offsetof(struct pt_regs, i2));
+	DEFINE(PT_I3, offsetof(struct pt_regs, i3));
+	DEFINE(PT_M0, offsetof(struct pt_regs, m0));
+	DEFINE(PT_M1, offsetof(struct pt_regs, m1));
+	DEFINE(PT_M2, offsetof(struct pt_regs, m2));
+	DEFINE(PT_M3, offsetof(struct pt_regs, m3));
+	DEFINE(PT_L0, offsetof(struct pt_regs, l0));
+	DEFINE(PT_L1, offsetof(struct pt_regs, l1));
+	DEFINE(PT_L2, offsetof(struct pt_regs, l2));
+	DEFINE(PT_L3, offsetof(struct pt_regs, l3));
+	DEFINE(PT_B0, offsetof(struct pt_regs, b0));
+	DEFINE(PT_B1, offsetof(struct pt_regs, b1));
+	DEFINE(PT_B2, offsetof(struct pt_regs, b2));
+	DEFINE(PT_B3, offsetof(struct pt_regs, b3));
+	DEFINE(PT_A0X, offsetof(struct pt_regs, a0x));
+	DEFINE(PT_A0W, offsetof(struct pt_regs, a0w));
+	DEFINE(PT_A1X, offsetof(struct pt_regs, a1x));
+	DEFINE(PT_A1W, offsetof(struct pt_regs, a1w));
+	DEFINE(PT_LC0, offsetof(struct pt_regs, lc0));
+	DEFINE(PT_LC1, offsetof(struct pt_regs, lc1));
+	DEFINE(PT_LT0, offsetof(struct pt_regs, lt0));
+	DEFINE(PT_LT1, offsetof(struct pt_regs, lt1));
+	DEFINE(PT_LB0, offsetof(struct pt_regs, lb0));
+	DEFINE(PT_LB1, offsetof(struct pt_regs, lb1));
+	DEFINE(PT_ASTAT, offsetof(struct pt_regs, astat));
+	DEFINE(PT_RESERVED, offsetof(struct pt_regs, reserved));
+	DEFINE(PT_RETS, offsetof(struct pt_regs, rets));
+	DEFINE(PT_PC, offsetof(struct pt_regs, pc));
+	DEFINE(PT_RETX, offsetof(struct pt_regs, retx));
+	DEFINE(PT_RETN, offsetof(struct pt_regs, retn));
+	DEFINE(PT_RETE, offsetof(struct pt_regs, rete));
+	DEFINE(PT_SEQSTAT, offsetof(struct pt_regs, seqstat));
+	DEFINE(PT_SYSCFG, offsetof(struct pt_regs, syscfg));
+	DEFINE(PT_IPEND, offsetof(struct pt_regs, ipend));
+	DEFINE(SIZEOF_PTREGS, sizeof(struct pt_regs));
+	DEFINE(PT_TEXT_ADDR, sizeof(struct pt_regs));        /* Needed by gdb */
+	DEFINE(PT_TEXT_END_ADDR, 4 + sizeof(struct pt_regs));/* Needed by gdb */
+	DEFINE(PT_DATA_ADDR, 8 + sizeof(struct pt_regs));    /* Needed by gdb */
+	DEFINE(PT_FDPIC_EXEC, 12 + sizeof(struct pt_regs));  /* Needed by gdb */
+	DEFINE(PT_FDPIC_INTERP, 16 + sizeof(struct pt_regs));/* Needed by gdb */
+
+	/* signal defines */
+	DEFINE(SIGSEGV, SIGSEGV);
+	DEFINE(SIGTRAP, SIGTRAP);
+
+	/* PDA management (in L1 scratchpad) */
+	DEFINE(PDA_SYSCFG, offsetof(struct blackfin_pda, syscfg));
+#ifdef CONFIG_SMP
+	DEFINE(PDA_IRQFLAGS, offsetof(struct blackfin_pda, imask));
+#endif
+	DEFINE(PDA_IPDT, offsetof(struct blackfin_pda, ipdt));
+	DEFINE(PDA_IPDT_SWAPCOUNT, offsetof(struct blackfin_pda, ipdt_swapcount));
+	DEFINE(PDA_DPDT, offsetof(struct blackfin_pda, dpdt));
+	DEFINE(PDA_DPDT_SWAPCOUNT, offsetof(struct blackfin_pda, dpdt_swapcount));
+	DEFINE(PDA_EXIPTR, offsetof(struct blackfin_pda, ex_iptr));
+	DEFINE(PDA_EXOPTR, offsetof(struct blackfin_pda, ex_optr));
+	DEFINE(PDA_EXBUF, offsetof(struct blackfin_pda, ex_buf));
+	DEFINE(PDA_EXIMASK, offsetof(struct blackfin_pda, ex_imask));
+	DEFINE(PDA_EXSTACK, offsetof(struct blackfin_pda, ex_stack));
+	DEFINE(PDA_EXIPEND, offsetof(struct blackfin_pda, ex_ipend));
+#ifdef ANOMALY_05000261
+	DEFINE(PDA_LFRETX, offsetof(struct blackfin_pda, last_cplb_fault_retx));
+#endif
+	DEFINE(PDA_DCPLB, offsetof(struct blackfin_pda, dcplb_fault_addr));
+	DEFINE(PDA_ICPLB, offsetof(struct blackfin_pda, icplb_fault_addr));
+	DEFINE(PDA_RETX, offsetof(struct blackfin_pda, retx));
+	DEFINE(PDA_SEQSTAT, offsetof(struct blackfin_pda, seqstat));
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	DEFINE(PDA_DF_DCPLB, offsetof(struct blackfin_pda, dcplb_doublefault_addr));
+	DEFINE(PDA_DF_ICPLB, offsetof(struct blackfin_pda, icplb_doublefault_addr));
+	DEFINE(PDA_DF_SEQSTAT, offsetof(struct blackfin_pda, seqstat_doublefault));
+	DEFINE(PDA_DF_RETX, offsetof(struct blackfin_pda, retx_doublefault));
+#endif
+
+	/* PDA initial management */
+	DEFINE(PDA_INIT_RETX, offsetof(struct blackfin_initial_pda, retx));
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	DEFINE(PDA_INIT_DF_DCPLB, offsetof(struct blackfin_initial_pda, dcplb_doublefault_addr));
+	DEFINE(PDA_INIT_DF_ICPLB, offsetof(struct blackfin_initial_pda, icplb_doublefault_addr));
+	DEFINE(PDA_INIT_DF_SEQSTAT, offsetof(struct blackfin_initial_pda, seqstat_doublefault));
+	DEFINE(PDA_INIT_DF_RETX, offsetof(struct blackfin_initial_pda, retx_doublefault));
+#endif
+
+#ifdef CONFIG_SMP
+	/* Inter-core lock (in L2 SRAM) */
+	DEFINE(SIZEOF_CORELOCK, sizeof(struct corelock_slot));
+#endif
+
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/bfin_dma.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/bfin_dma.c
new file mode 100644
index 0000000..9d3eb0c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/bfin_dma.c
@@ -0,0 +1,612 @@
+/*
+ * bfin_dma.c - Blackfin DMA implementation
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/proc_fs.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/spinlock.h>
+
+#include <asm/blackfin.h>
+#include <asm/cacheflush.h>
+#include <asm/dma.h>
+#include <linux/uaccess.h>
+#include <asm/early_printk.h>
+
+/*
+ * To make sure we work around 05000119 - we always check DMA_DONE bit,
+ * never the DMA_RUN bit
+ */
+
+struct dma_channel dma_ch[MAX_DMA_CHANNELS];
+EXPORT_SYMBOL(dma_ch);
+
+static int __init blackfin_dma_init(void)
+{
+	int i;
+
+	printk(KERN_INFO "Blackfin DMA Controller\n");
+
+
+#if ANOMALY_05000480
+	bfin_write_DMAC_TC_PER(0x0111);
+#endif
+
+	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
+		atomic_set(&dma_ch[i].chan_status, 0);
+		dma_ch[i].regs = dma_io_base_addr[i];
+	}
+#if defined(CH_MEM_STREAM3_SRC) && defined(CONFIG_BF60x)
+	/* Mark MEMDMA Channel 3 as requested since we're using it internally */
+	request_dma(CH_MEM_STREAM3_DEST, "Blackfin dma_memcpy");
+	request_dma(CH_MEM_STREAM3_SRC, "Blackfin dma_memcpy");
+#else
+	/* Mark MEMDMA Channel 0 as requested since we're using it internally */
+	request_dma(CH_MEM_STREAM0_DEST, "Blackfin dma_memcpy");
+	request_dma(CH_MEM_STREAM0_SRC, "Blackfin dma_memcpy");
+#endif
+
+#if defined(CONFIG_DEB_DMA_URGENT)
+	bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE()
+			 | DEB1_URGENT | DEB2_URGENT | DEB3_URGENT);
+#endif
+
+	return 0;
+}
+arch_initcall(blackfin_dma_init);
+
+#ifdef CONFIG_PROC_FS
+static int proc_dma_show(struct seq_file *m, void *v)
+{
+	int i;
+
+	for (i = 0; i < MAX_DMA_CHANNELS; ++i)
+		if (dma_channel_active(i))
+			seq_printf(m, "%2d: %s\n", i, dma_ch[i].device_id);
+
+	return 0;
+}
+
+static int proc_dma_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, proc_dma_show, NULL);
+}
+
+static const struct file_operations proc_dma_operations = {
+	.open		= proc_dma_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_dma_init(void)
+{
+	proc_create("dma", 0, NULL, &proc_dma_operations);
+	return 0;
+}
+late_initcall(proc_dma_init);
+#endif
+
+static void set_dma_peripheral_map(unsigned int channel, const char *device_id)
+{
+#ifdef CONFIG_BF54x
+	unsigned int per_map;
+
+	switch (channel) {
+		case CH_UART2_RX: per_map = 0xC << 12; break;
+		case CH_UART2_TX: per_map = 0xD << 12; break;
+		case CH_UART3_RX: per_map = 0xE << 12; break;
+		case CH_UART3_TX: per_map = 0xF << 12; break;
+		default:          return;
+	}
+
+	if (strncmp(device_id, "BFIN_UART", 9) == 0)
+		dma_ch[channel].regs->peripheral_map = per_map;
+#endif
+}
+
+/**
+ *	request_dma - request a DMA channel
+ *
+ * Request the specific DMA channel from the system if it's available.
+ */
+int request_dma(unsigned int channel, const char *device_id)
+{
+	pr_debug("request_dma() : BEGIN\n");
+
+	if (device_id == NULL)
+		printk(KERN_WARNING "request_dma(%u): no device_id given\n", channel);
+
+#if defined(CONFIG_BF561) && ANOMALY_05000182
+	if (channel >= CH_IMEM_STREAM0_DEST && channel <= CH_IMEM_STREAM1_DEST) {
+		if (get_cclk() > 500000000) {
+			printk(KERN_WARNING
+			       "Request IMDMA failed due to ANOMALY 05000182\n");
+			return -EFAULT;
+		}
+	}
+#endif
+
+	if (atomic_cmpxchg(&dma_ch[channel].chan_status, 0, 1)) {
+		pr_debug("DMA CHANNEL IN USE\n");
+		return -EBUSY;
+	}
+
+	set_dma_peripheral_map(channel, device_id);
+	dma_ch[channel].device_id = device_id;
+	dma_ch[channel].irq = 0;
+
+	/* This is to be enabled by putting a restriction -
+	 * you have to request DMA, before doing any operations on
+	 * descriptor/channel
+	 */
+	pr_debug("request_dma() : END\n");
+	return 0;
+}
+EXPORT_SYMBOL(request_dma);
+
+int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data)
+{
+	int ret;
+	unsigned int irq;
+
+	BUG_ON(channel >= MAX_DMA_CHANNELS || !callback ||
+			!atomic_read(&dma_ch[channel].chan_status));
+
+	irq = channel2irq(channel);
+	ret = request_irq(irq, callback, 0, dma_ch[channel].device_id, data);
+	if (ret)
+		return ret;
+
+	dma_ch[channel].irq = irq;
+	dma_ch[channel].data = data;
+
+	return 0;
+}
+EXPORT_SYMBOL(set_dma_callback);
+
+/**
+ *	clear_dma_buffer - clear DMA fifos for specified channel
+ *
+ * Set the Buffer Clear bit in the Configuration register of specific DMA
+ * channel. This will stop the descriptor based DMA operation.
+ */
+static void clear_dma_buffer(unsigned int channel)
+{
+	dma_ch[channel].regs->cfg |= RESTART;
+	SSYNC();
+	dma_ch[channel].regs->cfg &= ~RESTART;
+}
+
+void free_dma(unsigned int channel)
+{
+	pr_debug("freedma() : BEGIN\n");
+	BUG_ON(channel >= MAX_DMA_CHANNELS ||
+			!atomic_read(&dma_ch[channel].chan_status));
+
+	/* Halt the DMA */
+	disable_dma(channel);
+	clear_dma_buffer(channel);
+
+	if (dma_ch[channel].irq)
+		free_irq(dma_ch[channel].irq, dma_ch[channel].data);
+
+	/* Clear the DMA Variable in the Channel */
+	atomic_set(&dma_ch[channel].chan_status, 0);
+
+	pr_debug("freedma() : END\n");
+}
+EXPORT_SYMBOL(free_dma);
+
+#ifdef CONFIG_PM
+# ifndef MAX_DMA_SUSPEND_CHANNELS
+#  define MAX_DMA_SUSPEND_CHANNELS MAX_DMA_CHANNELS
+# endif
+# ifndef CONFIG_BF60x
+int blackfin_dma_suspend(void)
+{
+	int i;
+
+	for (i = 0; i < MAX_DMA_CHANNELS; ++i) {
+		if (dma_ch[i].regs->cfg & DMAEN) {
+			printk(KERN_ERR "DMA Channel %d failed to suspend\n", i);
+			return -EBUSY;
+		}
+		if (i < MAX_DMA_SUSPEND_CHANNELS)
+			dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map;
+	}
+
+#if ANOMALY_05000480
+	bfin_write_DMAC_TC_PER(0x0);
+#endif
+	return 0;
+}
+
+void blackfin_dma_resume(void)
+{
+	int i;
+
+	for (i = 0; i < MAX_DMA_CHANNELS; ++i) {
+		dma_ch[i].regs->cfg = 0;
+		if (i < MAX_DMA_SUSPEND_CHANNELS)
+			dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
+	}
+#if ANOMALY_05000480
+	bfin_write_DMAC_TC_PER(0x0111);
+#endif
+}
+# else
+int blackfin_dma_suspend(void)
+{
+	return 0;
+}
+
+void blackfin_dma_resume(void)
+{
+}
+#endif
+#endif
+
+/**
+ *	blackfin_dma_early_init - minimal DMA init
+ *
+ * Setup a few DMA registers so we can safely do DMA transfers early on in
+ * the kernel booting process.  Really this just means using dma_memcpy().
+ */
+void __init blackfin_dma_early_init(void)
+{
+	early_shadow_stamp();
+	bfin_write_MDMA_S0_CONFIG(0);
+	bfin_write_MDMA_S1_CONFIG(0);
+}
+
+void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
+{
+	unsigned long dst = (unsigned long)pdst;
+	unsigned long src = (unsigned long)psrc;
+	struct dma_register *dst_ch, *src_ch;
+
+	early_shadow_stamp();
+
+	/* We assume that everything is 4 byte aligned, so include
+	 * a basic sanity check
+	 */
+	BUG_ON(dst % 4);
+	BUG_ON(src % 4);
+	BUG_ON(size % 4);
+
+	src_ch = 0;
+	/* Find an avalible memDMA channel */
+	while (1) {
+		if (src_ch == (struct dma_register *)MDMA_S0_NEXT_DESC_PTR) {
+			dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
+			src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
+		} else {
+			dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
+			src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
+		}
+
+		if (!DMA_MMR_READ(&src_ch->cfg))
+			break;
+		else if (DMA_MMR_READ(&dst_ch->irq_status) & DMA_DONE) {
+			DMA_MMR_WRITE(&src_ch->cfg, 0);
+			break;
+		}
+	}
+
+	/* Force a sync in case a previous config reset on this channel
+	 * occurred.  This is needed so subsequent writes to DMA registers
+	 * are not spuriously lost/corrupted.
+	 */
+	__builtin_bfin_ssync();
+
+	/* Destination */
+	bfin_write32(&dst_ch->start_addr, dst);
+	DMA_MMR_WRITE(&dst_ch->x_count, size >> 2);
+	DMA_MMR_WRITE(&dst_ch->x_modify, 1 << 2);
+	DMA_MMR_WRITE(&dst_ch->irq_status, DMA_DONE | DMA_ERR);
+
+	/* Source */
+	bfin_write32(&src_ch->start_addr, src);
+	DMA_MMR_WRITE(&src_ch->x_count, size >> 2);
+	DMA_MMR_WRITE(&src_ch->x_modify, 1 << 2);
+	DMA_MMR_WRITE(&src_ch->irq_status, DMA_DONE | DMA_ERR);
+
+	/* Enable */
+	DMA_MMR_WRITE(&src_ch->cfg, DMAEN | WDSIZE_32);
+	DMA_MMR_WRITE(&dst_ch->cfg, WNR | DI_EN_X | DMAEN | WDSIZE_32);
+
+	/* Since we are atomic now, don't use the workaround ssync */
+	__builtin_bfin_ssync();
+
+#ifdef CONFIG_BF60x
+	/* Work around a possible MDMA anomaly. Running 2 MDMA channels to
+	 * transfer DDR data to L1 SRAM may corrupt data.
+	 * Should be reverted after this issue is root caused.
+	 */
+	while (!(DMA_MMR_READ(&dst_ch->irq_status) & DMA_DONE))
+		continue;
+#endif
+}
+
+void __init early_dma_memcpy_done(void)
+{
+	early_shadow_stamp();
+
+	while ((bfin_read_MDMA_S0_CONFIG() && !(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) ||
+	       (bfin_read_MDMA_S1_CONFIG() && !(bfin_read_MDMA_D1_IRQ_STATUS() & DMA_DONE)))
+		continue;
+
+	bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
+	bfin_write_MDMA_D1_IRQ_STATUS(DMA_DONE | DMA_ERR);
+	/*
+	 * Now that DMA is done, we would normally flush cache, but
+	 * i/d cache isn't running this early, so we don't bother,
+	 * and just clear out the DMA channel for next time
+	 */
+	bfin_write_MDMA_S0_CONFIG(0);
+	bfin_write_MDMA_S1_CONFIG(0);
+	bfin_write_MDMA_D0_CONFIG(0);
+	bfin_write_MDMA_D1_CONFIG(0);
+
+	__builtin_bfin_ssync();
+}
+
+#if defined(CH_MEM_STREAM3_SRC) && defined(CONFIG_BF60x)
+#define bfin_read_MDMA_S_CONFIG bfin_read_MDMA_S3_CONFIG
+#define bfin_write_MDMA_S_CONFIG bfin_write_MDMA_S3_CONFIG
+#define bfin_write_MDMA_S_START_ADDR bfin_write_MDMA_S3_START_ADDR
+#define bfin_write_MDMA_S_IRQ_STATUS bfin_write_MDMA_S3_IRQ_STATUS
+#define bfin_write_MDMA_S_X_COUNT bfin_write_MDMA_S3_X_COUNT
+#define bfin_write_MDMA_S_X_MODIFY bfin_write_MDMA_S3_X_MODIFY
+#define bfin_write_MDMA_S_Y_COUNT bfin_write_MDMA_S3_Y_COUNT
+#define bfin_write_MDMA_S_Y_MODIFY bfin_write_MDMA_S3_Y_MODIFY
+#define bfin_write_MDMA_D_CONFIG bfin_write_MDMA_D3_CONFIG
+#define bfin_write_MDMA_D_START_ADDR bfin_write_MDMA_D3_START_ADDR
+#define bfin_read_MDMA_D_IRQ_STATUS bfin_read_MDMA_D3_IRQ_STATUS
+#define bfin_write_MDMA_D_IRQ_STATUS bfin_write_MDMA_D3_IRQ_STATUS
+#define bfin_write_MDMA_D_X_COUNT bfin_write_MDMA_D3_X_COUNT
+#define bfin_write_MDMA_D_X_MODIFY bfin_write_MDMA_D3_X_MODIFY
+#define bfin_write_MDMA_D_Y_COUNT bfin_write_MDMA_D3_Y_COUNT
+#define bfin_write_MDMA_D_Y_MODIFY bfin_write_MDMA_D3_Y_MODIFY
+#else
+#define bfin_read_MDMA_S_CONFIG bfin_read_MDMA_S0_CONFIG
+#define bfin_write_MDMA_S_CONFIG bfin_write_MDMA_S0_CONFIG
+#define bfin_write_MDMA_S_START_ADDR bfin_write_MDMA_S0_START_ADDR
+#define bfin_write_MDMA_S_IRQ_STATUS bfin_write_MDMA_S0_IRQ_STATUS
+#define bfin_write_MDMA_S_X_COUNT bfin_write_MDMA_S0_X_COUNT
+#define bfin_write_MDMA_S_X_MODIFY bfin_write_MDMA_S0_X_MODIFY
+#define bfin_write_MDMA_S_Y_COUNT bfin_write_MDMA_S0_Y_COUNT
+#define bfin_write_MDMA_S_Y_MODIFY bfin_write_MDMA_S0_Y_MODIFY
+#define bfin_write_MDMA_D_CONFIG bfin_write_MDMA_D0_CONFIG
+#define bfin_write_MDMA_D_START_ADDR bfin_write_MDMA_D0_START_ADDR
+#define bfin_read_MDMA_D_IRQ_STATUS bfin_read_MDMA_D0_IRQ_STATUS
+#define bfin_write_MDMA_D_IRQ_STATUS bfin_write_MDMA_D0_IRQ_STATUS
+#define bfin_write_MDMA_D_X_COUNT bfin_write_MDMA_D0_X_COUNT
+#define bfin_write_MDMA_D_X_MODIFY bfin_write_MDMA_D0_X_MODIFY
+#define bfin_write_MDMA_D_Y_COUNT bfin_write_MDMA_D0_Y_COUNT
+#define bfin_write_MDMA_D_Y_MODIFY bfin_write_MDMA_D0_Y_MODIFY
+#endif
+
+/**
+ *	__dma_memcpy - program the MDMA registers
+ *
+ * Actually program MDMA0 and wait for the transfer to finish.  Disable IRQs
+ * while programming registers so that everything is fully configured.  Wait
+ * for DMA to finish with IRQs enabled.  If interrupted, the initial DMA_DONE
+ * check will make sure we don't clobber any existing transfer.
+ */
+static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u32 conf)
+{
+	static DEFINE_SPINLOCK(mdma_lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdma_lock, flags);
+
+	/* Force a sync in case a previous config reset on this channel
+	 * occurred.  This is needed so subsequent writes to DMA registers
+	 * are not spuriously lost/corrupted.  Do it under irq lock and
+	 * without the anomaly version (because we are atomic already).
+	 */
+	__builtin_bfin_ssync();
+
+	if (bfin_read_MDMA_S_CONFIG())
+		while (!(bfin_read_MDMA_D_IRQ_STATUS() & DMA_DONE))
+			continue;
+
+	if (conf & DMA2D) {
+		/* For larger bit sizes, we've already divided down cnt so it
+		 * is no longer a multiple of 64k.  So we have to break down
+		 * the limit here so it is a multiple of the incoming size.
+		 * There is no limitation here in terms of total size other
+		 * than the hardware though as the bits lost in the shift are
+		 * made up by MODIFY (== we can hit the whole address space).
+		 * X: (2^(16 - 0)) * 1 == (2^(16 - 1)) * 2 == (2^(16 - 2)) * 4
+		 */
+		u32 shift = abs(dmod) >> 1;
+		size_t ycnt = cnt >> (16 - shift);
+		cnt = 1 << (16 - shift);
+		bfin_write_MDMA_D_Y_COUNT(ycnt);
+		bfin_write_MDMA_S_Y_COUNT(ycnt);
+		bfin_write_MDMA_D_Y_MODIFY(dmod);
+		bfin_write_MDMA_S_Y_MODIFY(smod);
+	}
+
+	bfin_write_MDMA_D_START_ADDR(daddr);
+	bfin_write_MDMA_D_X_COUNT(cnt);
+	bfin_write_MDMA_D_X_MODIFY(dmod);
+	bfin_write_MDMA_D_IRQ_STATUS(DMA_DONE | DMA_ERR);
+
+	bfin_write_MDMA_S_START_ADDR(saddr);
+	bfin_write_MDMA_S_X_COUNT(cnt);
+	bfin_write_MDMA_S_X_MODIFY(smod);
+	bfin_write_MDMA_S_IRQ_STATUS(DMA_DONE | DMA_ERR);
+
+	bfin_write_MDMA_S_CONFIG(DMAEN | conf);
+	if (conf & DMA2D)
+		bfin_write_MDMA_D_CONFIG(WNR | DI_EN_Y | DMAEN | conf);
+	else
+		bfin_write_MDMA_D_CONFIG(WNR | DI_EN_X | DMAEN | conf);
+
+	spin_unlock_irqrestore(&mdma_lock, flags);
+
+	SSYNC();
+
+	while (!(bfin_read_MDMA_D_IRQ_STATUS() & DMA_DONE))
+		if (bfin_read_MDMA_S_CONFIG())
+			continue;
+		else
+			return;
+
+	bfin_write_MDMA_D_IRQ_STATUS(DMA_DONE | DMA_ERR);
+
+	bfin_write_MDMA_S_CONFIG(0);
+	bfin_write_MDMA_D_CONFIG(0);
+}
+
+/**
+ *	_dma_memcpy - translate C memcpy settings into MDMA settings
+ *
+ * Handle all the high level steps before we touch the MDMA registers.  So
+ * handle direction, tweaking of sizes, and formatting of addresses.
+ */
+static void *_dma_memcpy(void *pdst, const void *psrc, size_t size)
+{
+	u32 conf, shift;
+	s16 mod;
+	unsigned long dst = (unsigned long)pdst;
+	unsigned long src = (unsigned long)psrc;
+
+	if (size == 0)
+		return NULL;
+
+	if (dst % 4 == 0 && src % 4 == 0 && size % 4 == 0) {
+		conf = WDSIZE_32;
+		shift = 2;
+	} else if (dst % 2 == 0 && src % 2 == 0 && size % 2 == 0) {
+		conf = WDSIZE_16;
+		shift = 1;
+	} else {
+		conf = WDSIZE_8;
+		shift = 0;
+	}
+
+	/* If the two memory regions have a chance of overlapping, make
+	 * sure the memcpy still works as expected.  Do this by having the
+	 * copy run backwards instead.
+	 */
+	mod = 1 << shift;
+	if (src < dst) {
+		mod *= -1;
+		dst += size + mod;
+		src += size + mod;
+	}
+	size >>= shift;
+
+#ifndef DMA_MMR_SIZE_32
+	if (size > 0x10000)
+		conf |= DMA2D;
+#endif
+
+	__dma_memcpy(dst, mod, src, mod, size, conf);
+
+	return pdst;
+}
+
+/**
+ *	dma_memcpy - DMA memcpy under mutex lock
+ *
+ * Do not check arguments before starting the DMA memcpy.  Break the transfer
+ * up into two pieces.  The first transfer is in multiples of 64k and the
+ * second transfer is the piece smaller than 64k.
+ */
+void *dma_memcpy(void *pdst, const void *psrc, size_t size)
+{
+	unsigned long dst = (unsigned long)pdst;
+	unsigned long src = (unsigned long)psrc;
+
+	if (bfin_addr_dcacheable(src))
+		blackfin_dcache_flush_range(src, src + size);
+
+	if (bfin_addr_dcacheable(dst))
+		blackfin_dcache_invalidate_range(dst, dst + size);
+
+	return dma_memcpy_nocache(pdst, psrc, size);
+}
+EXPORT_SYMBOL(dma_memcpy);
+
+/**
+ *	dma_memcpy_nocache - DMA memcpy under mutex lock
+ *	- No cache flush/invalidate
+ *
+ * Do not check arguments before starting the DMA memcpy.  Break the transfer
+ * up into two pieces.  The first transfer is in multiples of 64k and the
+ * second transfer is the piece smaller than 64k.
+ */
+void *dma_memcpy_nocache(void *pdst, const void *psrc, size_t size)
+{
+#ifdef DMA_MMR_SIZE_32
+	_dma_memcpy(pdst, psrc, size);
+#else
+	size_t bulk, rest;
+
+	bulk = size & ~0xffff;
+	rest = size - bulk;
+	if (bulk)
+		_dma_memcpy(pdst, psrc, bulk);
+	_dma_memcpy(pdst + bulk, psrc + bulk, rest);
+#endif
+	return pdst;
+}
+EXPORT_SYMBOL(dma_memcpy_nocache);
+
+/**
+ *	safe_dma_memcpy - DMA memcpy w/argument checking
+ *
+ * Verify arguments are safe before heading to dma_memcpy().
+ */
+void *safe_dma_memcpy(void *dst, const void *src, size_t size)
+{
+	if (!access_ok(VERIFY_WRITE, dst, size))
+		return NULL;
+	if (!access_ok(VERIFY_READ, src, size))
+		return NULL;
+	return dma_memcpy(dst, src, size);
+}
+EXPORT_SYMBOL(safe_dma_memcpy);
+
+static void _dma_out(unsigned long addr, unsigned long buf, unsigned DMA_MMR_SIZE_TYPE len,
+                     u16 size, u16 dma_size)
+{
+	blackfin_dcache_flush_range(buf, buf + len * size);
+	__dma_memcpy(addr, 0, buf, size, len, dma_size);
+}
+
+static void _dma_in(unsigned long addr, unsigned long buf, unsigned DMA_MMR_SIZE_TYPE len,
+                    u16 size, u16 dma_size)
+{
+	blackfin_dcache_invalidate_range(buf, buf + len * size);
+	__dma_memcpy(buf, size, addr, 0, len, dma_size);
+}
+
+#define MAKE_DMA_IO(io, bwl, isize, dmasize, cnst) \
+void dma_##io##s##bwl(unsigned long addr, cnst void *buf, unsigned DMA_MMR_SIZE_TYPE len) \
+{ \
+	_dma_##io(addr, (unsigned long)buf, len, isize, WDSIZE_##dmasize); \
+} \
+EXPORT_SYMBOL(dma_##io##s##bwl)
+MAKE_DMA_IO(out, b, 1,  8, const);
+MAKE_DMA_IO(in,  b, 1,  8, );
+MAKE_DMA_IO(out, w, 2, 16, const);
+MAKE_DMA_IO(in,  w, 2, 16, );
+MAKE_DMA_IO(out, l, 4, 32, const);
+MAKE_DMA_IO(in,  l, 4, 32, );
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/bfin_gpio.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/bfin_gpio.c
new file mode 100644
index 0000000..c5d3128
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/bfin_gpio.c
@@ -0,0 +1,1205 @@
+/*
+ * GPIO Abstraction Layer
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/gpio/driver.h>
+/* FIXME: consumer API required for gpio_set_value() etc, get rid of this */
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
+#if ANOMALY_05000311 || ANOMALY_05000323
+enum {
+	AWA_data = SYSCR,
+	AWA_data_clear = SYSCR,
+	AWA_data_set = SYSCR,
+	AWA_toggle = SYSCR,
+	AWA_maska = BFIN_UART_SCR,
+	AWA_maska_clear = BFIN_UART_SCR,
+	AWA_maska_set = BFIN_UART_SCR,
+	AWA_maska_toggle = BFIN_UART_SCR,
+	AWA_maskb = BFIN_UART_GCTL,
+	AWA_maskb_clear = BFIN_UART_GCTL,
+	AWA_maskb_set = BFIN_UART_GCTL,
+	AWA_maskb_toggle = BFIN_UART_GCTL,
+	AWA_dir = SPORT1_STAT,
+	AWA_polar = SPORT1_STAT,
+	AWA_edge = SPORT1_STAT,
+	AWA_both = SPORT1_STAT,
+#if ANOMALY_05000311
+	AWA_inen = TIMER_ENABLE,
+#elif ANOMALY_05000323
+	AWA_inen = DMA1_1_CONFIG,
+#endif
+};
+	/* Anomaly Workaround */
+#define AWA_DUMMY_READ(name) bfin_read16(AWA_ ## name)
+#else
+#define AWA_DUMMY_READ(...)  do { } while (0)
+#endif
+
+static struct gpio_port_t * const gpio_array[] = {
+#if defined(BF533_FAMILY) || defined(BF538_FAMILY)
+	(struct gpio_port_t *) FIO_FLAG_D,
+#elif defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
+	(struct gpio_port_t *) PORTFIO,
+	(struct gpio_port_t *) PORTGIO,
+	(struct gpio_port_t *) PORTHIO,
+#elif defined(BF561_FAMILY)
+	(struct gpio_port_t *) FIO0_FLAG_D,
+	(struct gpio_port_t *) FIO1_FLAG_D,
+	(struct gpio_port_t *) FIO2_FLAG_D,
+#else
+# error no gpio arrays defined
+#endif
+};
+
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
+static unsigned short * const port_fer[] = {
+	(unsigned short *) PORTF_FER,
+	(unsigned short *) PORTG_FER,
+	(unsigned short *) PORTH_FER,
+};
+
+# if !defined(BF537_FAMILY)
+static unsigned short * const port_mux[] = {
+	(unsigned short *) PORTF_MUX,
+	(unsigned short *) PORTG_MUX,
+	(unsigned short *) PORTH_MUX,
+};
+
+static const
+u8 pmux_offset[][16] = {
+#  if defined(CONFIG_BF52x)
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
+	{ 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
+#  elif defined(CONFIG_BF51x)
+	{ 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */
+	{ 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */
+	{ 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */
+#  endif
+};
+# endif
+
+#elif defined(BF538_FAMILY)
+static unsigned short * const port_fer[] = {
+	(unsigned short *) PORTCIO_FER,
+	(unsigned short *) PORTDIO_FER,
+	(unsigned short *) PORTEIO_FER,
+};
+#endif
+
+#define RESOURCE_LABEL_SIZE	16
+
+static struct str_ident {
+	char name[RESOURCE_LABEL_SIZE];
+} str_ident[MAX_RESOURCES];
+
+#if defined(CONFIG_PM)
+static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
+# ifdef BF538_FAMILY
+static unsigned short port_fer_saved[3];
+# endif
+#endif
+
+static void gpio_error(unsigned gpio)
+{
+	printk(KERN_ERR "bfin-gpio: GPIO %d wasn't requested!\n", gpio);
+}
+
+static void set_label(unsigned short ident, const char *label)
+{
+	if (label) {
+		strncpy(str_ident[ident].name, label,
+			 RESOURCE_LABEL_SIZE);
+		str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0;
+	}
+}
+
+static char *get_label(unsigned short ident)
+{
+	return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN");
+}
+
+static int cmp_label(unsigned short ident, const char *label)
+{
+	if (label == NULL) {
+		dump_stack();
+		printk(KERN_ERR "Please provide none-null label\n");
+	}
+
+	if (label)
+		return strcmp(str_ident[ident].name, label);
+	else
+		return -EINVAL;
+}
+
+#define map_entry(m, i)      reserved_##m##_map[gpio_bank(i)]
+#define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i))
+#define reserve(m, i)        (map_entry(m, i) |= gpio_bit(i))
+#define unreserve(m, i)      (map_entry(m, i) &= ~gpio_bit(i))
+#define DECLARE_RESERVED_MAP(m, c) static unsigned short reserved_##m##_map[c]
+
+DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM);
+DECLARE_RESERVED_MAP(peri, DIV_ROUND_UP(MAX_RESOURCES, GPIO_BANKSIZE));
+DECLARE_RESERVED_MAP(gpio_irq, GPIO_BANK_NUM);
+
+inline int check_gpio(unsigned gpio)
+{
+	if (gpio >= MAX_BLACKFIN_GPIOS)
+		return -EINVAL;
+	return 0;
+}
+
+static void port_setup(unsigned gpio, unsigned short usage)
+{
+#if defined(BF538_FAMILY)
+	/*
+	 * BF538/9 Port C,D and E are special.
+	 * Inverted PORT_FER polarity on CDE and no PORF_FER on F
+	 * Regular PORT F GPIOs are handled here, CDE are exclusively
+	 * managed by GPIOLIB
+	 */
+
+	if (gpio < MAX_BLACKFIN_GPIOS || gpio >= MAX_RESOURCES)
+		return;
+
+	gpio -= MAX_BLACKFIN_GPIOS;
+
+	if (usage == GPIO_USAGE)
+		*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
+	else
+		*port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+	SSYNC();
+	return;
+#endif
+
+	if (check_gpio(gpio))
+		return;
+
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
+	if (usage == GPIO_USAGE)
+		*port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+	else
+		*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
+	SSYNC();
+#endif
+}
+
+#ifdef BF537_FAMILY
+static const s8 port_mux[] = {
+	[GPIO_PF0] = 3,
+	[GPIO_PF1] = 3,
+	[GPIO_PF2] = 4,
+	[GPIO_PF3] = 4,
+	[GPIO_PF4] = 5,
+	[GPIO_PF5] = 6,
+	[GPIO_PF6] = 7,
+	[GPIO_PF7] = 8,
+	[GPIO_PF8 ... GPIO_PF15] = -1,
+	[GPIO_PG0 ... GPIO_PG7] = -1,
+	[GPIO_PG8] = 9,
+	[GPIO_PG9] = 9,
+	[GPIO_PG10] = 10,
+	[GPIO_PG11] = 10,
+	[GPIO_PG12] = 10,
+	[GPIO_PG13] = 11,
+	[GPIO_PG14] = 11,
+	[GPIO_PG15] = 11,
+	[GPIO_PH0 ... GPIO_PH15] = -1,
+	[PORT_PJ0 ... PORT_PJ3] = -1,
+	[PORT_PJ4] = 1,
+	[PORT_PJ5] = 1,
+	[PORT_PJ6 ... PORT_PJ9] = -1,
+	[PORT_PJ10] = 0,
+	[PORT_PJ11] = 0,
+};
+
+static int portmux_group_check(unsigned short per)
+{
+	u16 ident = P_IDENT(per);
+	u16 function = P_FUNCT2MUX(per);
+	s8 offset = port_mux[ident];
+	u16 m, pmux, pfunc, mask;
+
+	if (offset < 0)
+		return 0;
+
+	pmux = bfin_read_PORT_MUX();
+	for (m = 0; m < ARRAY_SIZE(port_mux); ++m) {
+		if (m == ident)
+			continue;
+		if (port_mux[m] != offset)
+			continue;
+		if (!is_reserved(peri, m, 1))
+			continue;
+
+		if (offset == 1)
+			mask = 3;
+		else
+			mask = 1;
+
+		pfunc = (pmux >> offset) & mask;
+		if (pfunc != (function & mask)) {
+			pr_err("pin group conflict! request pin %d func %d conflict with pin %d func %d\n",
+				ident, function, m, pfunc);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static void portmux_setup(unsigned short per)
+{
+	u16 ident = P_IDENT(per);
+	u16 function = P_FUNCT2MUX(per);
+	s8 offset = port_mux[ident];
+	u16 pmux, mask;
+
+	if (offset == -1)
+		return;
+
+	pmux = bfin_read_PORT_MUX();
+	if (offset == 1)
+		mask = 3;
+	else
+		mask = 1;
+
+	pmux &= ~(mask << offset);
+	pmux |= ((function & mask) << offset);
+
+	bfin_write_PORT_MUX(pmux);
+}
+#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+static int portmux_group_check(unsigned short per)
+{
+	u16 ident = P_IDENT(per);
+	u16 function = P_FUNCT2MUX(per);
+	u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
+	u16 pin, gpiopin, pfunc;
+
+	for (pin = 0; pin < GPIO_BANKSIZE; ++pin) {
+		if (offset != pmux_offset[gpio_bank(ident)][pin])
+			continue;
+
+		gpiopin = gpio_bank(ident) * GPIO_BANKSIZE + pin;
+		if (gpiopin == ident)
+			continue;
+		if (!is_reserved(peri, gpiopin, 1))
+			continue;
+
+		pfunc = *port_mux[gpio_bank(ident)];
+		pfunc = (pfunc >> offset) & 3;
+		if (pfunc != function) {
+			pr_err("pin group conflict! request pin %d func %d conflict with pin %d func %d\n",
+				ident, function, gpiopin, pfunc);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+inline void portmux_setup(unsigned short per)
+{
+	u16 ident = P_IDENT(per);
+	u16 function = P_FUNCT2MUX(per);
+	u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
+	u16 pmux;
+
+	pmux = *port_mux[gpio_bank(ident)];
+	if  (((pmux >> offset) & 3) == function)
+		return;
+	pmux &= ~(3 << offset);
+	pmux |= (function & 3) << offset;
+	*port_mux[gpio_bank(ident)] = pmux;
+	SSYNC();
+}
+#else
+# define portmux_setup(...)  do { } while (0)
+static int portmux_group_check(unsigned short per)
+{
+	return 0;
+}
+#endif
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin General Purpose Ports Access Functions
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+*
+*
+* DESCRIPTION: These functions abstract direct register access
+*              to Blackfin processor General Purpose
+*              Ports Regsiters
+*
+* CAUTION: These functions do not belong to the GPIO Driver API
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+/* Set a specific bit */
+
+#define SET_GPIO(name) \
+void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
+{ \
+	unsigned long flags; \
+	flags = hard_local_irq_save(); \
+	if (arg) \
+		gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
+	else \
+		gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
+	AWA_DUMMY_READ(name); \
+	hard_local_irq_restore(flags); \
+} \
+EXPORT_SYMBOL(set_gpio_ ## name);
+
+SET_GPIO(dir)   /* set_gpio_dir() */
+SET_GPIO(inen)  /* set_gpio_inen() */
+SET_GPIO(polar) /* set_gpio_polar() */
+SET_GPIO(edge)  /* set_gpio_edge() */
+SET_GPIO(both)  /* set_gpio_both() */
+
+
+#define SET_GPIO_SC(name) \
+void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
+{ \
+	unsigned long flags; \
+	if (ANOMALY_05000311 || ANOMALY_05000323) \
+		flags = hard_local_irq_save(); \
+	if (arg) \
+		gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
+	else \
+		gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
+	if (ANOMALY_05000311 || ANOMALY_05000323) { \
+		AWA_DUMMY_READ(name); \
+		hard_local_irq_restore(flags); \
+	} \
+} \
+EXPORT_SYMBOL(set_gpio_ ## name);
+
+SET_GPIO_SC(maska)
+SET_GPIO_SC(maskb)
+SET_GPIO_SC(data)
+
+void set_gpio_toggle(unsigned gpio)
+{
+	unsigned long flags;
+	if (ANOMALY_05000311 || ANOMALY_05000323)
+		flags = hard_local_irq_save();
+	gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
+	if (ANOMALY_05000311 || ANOMALY_05000323) {
+		AWA_DUMMY_READ(toggle);
+		hard_local_irq_restore(flags);
+	}
+}
+EXPORT_SYMBOL(set_gpio_toggle);
+
+
+/*Set current PORT date (16-bit word)*/
+
+#define SET_GPIO_P(name) \
+void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
+{ \
+	unsigned long flags; \
+	if (ANOMALY_05000311 || ANOMALY_05000323) \
+		flags = hard_local_irq_save(); \
+	gpio_array[gpio_bank(gpio)]->name = arg; \
+	if (ANOMALY_05000311 || ANOMALY_05000323) { \
+		AWA_DUMMY_READ(name); \
+		hard_local_irq_restore(flags); \
+	} \
+} \
+EXPORT_SYMBOL(set_gpiop_ ## name);
+
+SET_GPIO_P(data)
+SET_GPIO_P(dir)
+SET_GPIO_P(inen)
+SET_GPIO_P(polar)
+SET_GPIO_P(edge)
+SET_GPIO_P(both)
+SET_GPIO_P(maska)
+SET_GPIO_P(maskb)
+
+/* Get a specific bit */
+#define GET_GPIO(name) \
+unsigned short get_gpio_ ## name(unsigned gpio) \
+{ \
+	unsigned long flags; \
+	unsigned short ret; \
+	if (ANOMALY_05000311 || ANOMALY_05000323) \
+		flags = hard_local_irq_save(); \
+	ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
+	if (ANOMALY_05000311 || ANOMALY_05000323) { \
+		AWA_DUMMY_READ(name); \
+		hard_local_irq_restore(flags); \
+	} \
+	return ret; \
+} \
+EXPORT_SYMBOL(get_gpio_ ## name);
+
+GET_GPIO(data)
+GET_GPIO(dir)
+GET_GPIO(inen)
+GET_GPIO(polar)
+GET_GPIO(edge)
+GET_GPIO(both)
+GET_GPIO(maska)
+GET_GPIO(maskb)
+
+/*Get current PORT date (16-bit word)*/
+
+#define GET_GPIO_P(name) \
+unsigned short get_gpiop_ ## name(unsigned gpio) \
+{ \
+	unsigned long flags; \
+	unsigned short ret; \
+	if (ANOMALY_05000311 || ANOMALY_05000323) \
+		flags = hard_local_irq_save(); \
+	ret = (gpio_array[gpio_bank(gpio)]->name); \
+	if (ANOMALY_05000311 || ANOMALY_05000323) { \
+		AWA_DUMMY_READ(name); \
+		hard_local_irq_restore(flags); \
+	} \
+	return ret; \
+} \
+EXPORT_SYMBOL(get_gpiop_ ## name);
+
+GET_GPIO_P(data)
+GET_GPIO_P(dir)
+GET_GPIO_P(inen)
+GET_GPIO_P(polar)
+GET_GPIO_P(edge)
+GET_GPIO_P(both)
+GET_GPIO_P(maska)
+GET_GPIO_P(maskb)
+
+
+#ifdef CONFIG_PM
+DECLARE_RESERVED_MAP(wakeup, GPIO_BANK_NUM);
+
+static const unsigned int sic_iwr_irqs[] = {
+#if defined(BF533_FAMILY)
+	IRQ_PROG_INTB
+#elif defined(BF537_FAMILY)
+	IRQ_PF_INTB_WATCH, IRQ_PORTG_INTB, IRQ_PH_INTB_MAC_TX
+#elif defined(BF538_FAMILY)
+	IRQ_PORTF_INTB
+#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+	IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB
+#elif defined(BF561_FAMILY)
+	IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB
+#else
+# error no SIC_IWR defined
+#endif
+};
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin PM Setup API
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+* type -
+*	PM_WAKE_RISING
+*	PM_WAKE_FALLING
+*	PM_WAKE_HIGH
+*	PM_WAKE_LOW
+*	PM_WAKE_BOTH_EDGES
+*
+* DESCRIPTION: Blackfin PM Driver API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+int bfin_gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl)
+{
+	unsigned long flags;
+
+	if (check_gpio(gpio) < 0)
+		return -EINVAL;
+
+	flags = hard_local_irq_save();
+	if (ctrl)
+		reserve(wakeup, gpio);
+	else
+		unreserve(wakeup, gpio);
+
+	set_gpio_maskb(gpio, ctrl);
+	hard_local_irq_restore(flags);
+
+	return 0;
+}
+
+int bfin_gpio_pm_standby_ctrl(unsigned ctrl)
+{
+	u16 bank, mask, i;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+		mask = map_entry(wakeup, i);
+		bank = gpio_bank(i);
+
+		if (mask)
+			bfin_internal_set_wake(sic_iwr_irqs[bank], ctrl);
+	}
+	return 0;
+}
+
+void bfin_gpio_pm_hibernate_suspend(void)
+{
+	int i, bank;
+
+#ifdef BF538_FAMILY
+	for (i = 0; i < ARRAY_SIZE(port_fer_saved); ++i)
+		port_fer_saved[i] = *port_fer[i];
+#endif
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+		bank = gpio_bank(i);
+
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
+		gpio_bank_saved[bank].fer = *port_fer[bank];
+#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+		gpio_bank_saved[bank].mux = *port_mux[bank];
+#else
+		if (bank == 0)
+			gpio_bank_saved[bank].mux = bfin_read_PORT_MUX();
+#endif
+#endif
+		gpio_bank_saved[bank].data  = gpio_array[bank]->data;
+		gpio_bank_saved[bank].inen  = gpio_array[bank]->inen;
+		gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
+		gpio_bank_saved[bank].dir   = gpio_array[bank]->dir;
+		gpio_bank_saved[bank].edge  = gpio_array[bank]->edge;
+		gpio_bank_saved[bank].both  = gpio_array[bank]->both;
+		gpio_bank_saved[bank].maska = gpio_array[bank]->maska;
+	}
+
+#ifdef BFIN_SPECIAL_GPIO_BANKS
+	bfin_special_gpio_pm_hibernate_suspend();
+#endif
+
+	AWA_DUMMY_READ(maska);
+}
+
+void bfin_gpio_pm_hibernate_restore(void)
+{
+	int i, bank;
+
+#ifdef BF538_FAMILY
+	for (i = 0; i < ARRAY_SIZE(port_fer_saved); ++i)
+		*port_fer[i] = port_fer_saved[i];
+#endif
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+		bank = gpio_bank(i);
+
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
+#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+		*port_mux[bank] = gpio_bank_saved[bank].mux;
+#else
+		if (bank == 0)
+			bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
+#endif
+		*port_fer[bank] = gpio_bank_saved[bank].fer;
+#endif
+		gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
+		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+						& gpio_bank_saved[bank].dir;
+		gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
+		gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
+		gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
+		gpio_array[bank]->both  = gpio_bank_saved[bank].both;
+		gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
+	}
+
+#ifdef BFIN_SPECIAL_GPIO_BANKS
+	bfin_special_gpio_pm_hibernate_restore();
+#endif
+
+	AWA_DUMMY_READ(maska);
+}
+
+
+#endif
+
+/***********************************************************
+*
+* FUNCTIONS:	Blackfin Peripheral Resource Allocation
+*		and PortMux Setup
+*
+* INPUTS/OUTPUTS:
+* per	Peripheral Identifier
+* label	String
+*
+* DESCRIPTION: Blackfin Peripheral Resource Allocation and Setup API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+int peripheral_request(unsigned short per, const char *label)
+{
+	unsigned long flags;
+	unsigned short ident = P_IDENT(per);
+
+	/*
+	 * Don't cares are pins with only one dedicated function
+	 */
+
+	if (per & P_DONTCARE)
+		return 0;
+
+	if (!(per & P_DEFINED))
+		return -ENODEV;
+
+	BUG_ON(ident >= MAX_RESOURCES);
+
+	flags = hard_local_irq_save();
+
+	/* If a pin can be muxed as either GPIO or peripheral, make
+	 * sure it is not already a GPIO pin when we request it.
+	 */
+	if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) {
+		if (system_state == SYSTEM_BOOTING)
+			dump_stack();
+		printk(KERN_ERR
+		       "%s: Peripheral %d is already reserved as GPIO by %s !\n",
+		       __func__, ident, get_label(ident));
+		hard_local_irq_restore(flags);
+		return -EBUSY;
+	}
+
+	if (unlikely(is_reserved(peri, ident, 1))) {
+
+		/*
+		 * Pin functions like AMC address strobes my
+		 * be requested and used by several drivers
+		 */
+
+		if (!(per & P_MAYSHARE)) {
+			/*
+			 * Allow that the identical pin function can
+			 * be requested from the same driver twice
+			 */
+
+			if (cmp_label(ident, label) == 0)
+				goto anyway;
+
+			if (system_state == SYSTEM_BOOTING)
+				dump_stack();
+			printk(KERN_ERR
+			       "%s: Peripheral %d function %d is already reserved by %s !\n",
+			       __func__, ident, P_FUNCT2MUX(per), get_label(ident));
+			hard_local_irq_restore(flags);
+			return -EBUSY;
+		}
+	}
+
+	if (unlikely(portmux_group_check(per))) {
+		hard_local_irq_restore(flags);
+		return -EBUSY;
+	}
+ anyway:
+	reserve(peri, ident);
+
+	portmux_setup(per);
+	port_setup(ident, PERIPHERAL_USAGE);
+
+	hard_local_irq_restore(flags);
+	set_label(ident, label);
+
+	return 0;
+}
+EXPORT_SYMBOL(peripheral_request);
+
+int peripheral_request_list(const unsigned short per[], const char *label)
+{
+	u16 cnt;
+	int ret;
+
+	for (cnt = 0; per[cnt] != 0; cnt++) {
+
+		ret = peripheral_request(per[cnt], label);
+
+		if (ret < 0) {
+			for ( ; cnt > 0; cnt--)
+				peripheral_free(per[cnt - 1]);
+
+			return ret;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(peripheral_request_list);
+
+void peripheral_free(unsigned short per)
+{
+	unsigned long flags;
+	unsigned short ident = P_IDENT(per);
+
+	if (per & P_DONTCARE)
+		return;
+
+	if (!(per & P_DEFINED))
+		return;
+
+	flags = hard_local_irq_save();
+
+	if (unlikely(!is_reserved(peri, ident, 0))) {
+		hard_local_irq_restore(flags);
+		return;
+	}
+
+	if (!(per & P_MAYSHARE))
+		port_setup(ident, GPIO_USAGE);
+
+	unreserve(peri, ident);
+
+	set_label(ident, "free");
+
+	hard_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(peripheral_free);
+
+void peripheral_free_list(const unsigned short per[])
+{
+	u16 cnt;
+	for (cnt = 0; per[cnt] != 0; cnt++)
+		peripheral_free(per[cnt]);
+}
+EXPORT_SYMBOL(peripheral_free_list);
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin GPIO Driver
+*
+* INPUTS/OUTPUTS:
+* gpio	PIO Number between 0 and MAX_BLACKFIN_GPIOS
+* label	String
+*
+* DESCRIPTION: Blackfin GPIO Driver API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+int bfin_gpio_request(unsigned gpio, const char *label)
+{
+	unsigned long flags;
+
+	if (check_gpio(gpio) < 0)
+		return -EINVAL;
+
+	flags = hard_local_irq_save();
+
+	/*
+	 * Allow that the identical GPIO can
+	 * be requested from the same driver twice
+	 * Do nothing and return -
+	 */
+
+	if (cmp_label(gpio, label) == 0) {
+		hard_local_irq_restore(flags);
+		return 0;
+	}
+
+	if (unlikely(is_reserved(gpio, gpio, 1))) {
+		if (system_state == SYSTEM_BOOTING)
+			dump_stack();
+		printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
+		       gpio, get_label(gpio));
+		hard_local_irq_restore(flags);
+		return -EBUSY;
+	}
+	if (unlikely(is_reserved(peri, gpio, 1))) {
+		if (system_state == SYSTEM_BOOTING)
+			dump_stack();
+		printk(KERN_ERR
+		       "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
+		       gpio, get_label(gpio));
+		hard_local_irq_restore(flags);
+		return -EBUSY;
+	}
+	if (unlikely(is_reserved(gpio_irq, gpio, 1))) {
+		printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!"
+		       " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio);
+	} else {	/* Reset POLAR setting when acquiring a gpio for the first time */
+		set_gpio_polar(gpio, 0);
+	}
+
+	reserve(gpio, gpio);
+	set_label(gpio, label);
+
+	hard_local_irq_restore(flags);
+
+	port_setup(gpio, GPIO_USAGE);
+
+	return 0;
+}
+EXPORT_SYMBOL(bfin_gpio_request);
+
+void bfin_gpio_free(unsigned gpio)
+{
+	unsigned long flags;
+
+	if (check_gpio(gpio) < 0)
+		return;
+
+	might_sleep();
+
+	flags = hard_local_irq_save();
+
+	if (unlikely(!is_reserved(gpio, gpio, 0))) {
+		if (system_state == SYSTEM_BOOTING)
+			dump_stack();
+		gpio_error(gpio);
+		hard_local_irq_restore(flags);
+		return;
+	}
+
+	unreserve(gpio, gpio);
+
+	set_label(gpio, "free");
+
+	hard_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(bfin_gpio_free);
+
+#ifdef BFIN_SPECIAL_GPIO_BANKS
+DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES));
+
+int bfin_special_gpio_request(unsigned gpio, const char *label)
+{
+	unsigned long flags;
+
+	flags = hard_local_irq_save();
+
+	/*
+	 * Allow that the identical GPIO can
+	 * be requested from the same driver twice
+	 * Do nothing and return -
+	 */
+
+	if (cmp_label(gpio, label) == 0) {
+		hard_local_irq_restore(flags);
+		return 0;
+	}
+
+	if (unlikely(is_reserved(special_gpio, gpio, 1))) {
+		hard_local_irq_restore(flags);
+		printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
+		       gpio, get_label(gpio));
+
+		return -EBUSY;
+	}
+	if (unlikely(is_reserved(peri, gpio, 1))) {
+		hard_local_irq_restore(flags);
+		printk(KERN_ERR
+		       "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
+		       gpio, get_label(gpio));
+
+		return -EBUSY;
+	}
+
+	reserve(special_gpio, gpio);
+	reserve(peri, gpio);
+
+	set_label(gpio, label);
+	hard_local_irq_restore(flags);
+	port_setup(gpio, GPIO_USAGE);
+
+	return 0;
+}
+EXPORT_SYMBOL(bfin_special_gpio_request);
+
+void bfin_special_gpio_free(unsigned gpio)
+{
+	unsigned long flags;
+
+	might_sleep();
+
+	flags = hard_local_irq_save();
+
+	if (unlikely(!is_reserved(special_gpio, gpio, 0))) {
+		gpio_error(gpio);
+		hard_local_irq_restore(flags);
+		return;
+	}
+
+	unreserve(special_gpio, gpio);
+	unreserve(peri, gpio);
+	set_label(gpio, "free");
+	hard_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(bfin_special_gpio_free);
+#endif
+
+
+int bfin_gpio_irq_request(unsigned gpio, const char *label)
+{
+	unsigned long flags;
+
+	if (check_gpio(gpio) < 0)
+		return -EINVAL;
+
+	flags = hard_local_irq_save();
+
+	if (unlikely(is_reserved(peri, gpio, 1))) {
+		if (system_state == SYSTEM_BOOTING)
+			dump_stack();
+		printk(KERN_ERR
+		       "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
+		       gpio, get_label(gpio));
+		hard_local_irq_restore(flags);
+		return -EBUSY;
+	}
+	if (unlikely(is_reserved(gpio, gpio, 1)))
+		printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved by %s! "
+		       "(Documentation/blackfin/bfin-gpio-notes.txt)\n",
+		       gpio, get_label(gpio));
+
+	reserve(gpio_irq, gpio);
+	set_label(gpio, label);
+
+	hard_local_irq_restore(flags);
+
+	port_setup(gpio, GPIO_USAGE);
+
+	return 0;
+}
+
+void bfin_gpio_irq_free(unsigned gpio)
+{
+	unsigned long flags;
+
+	if (check_gpio(gpio) < 0)
+		return;
+
+	flags = hard_local_irq_save();
+
+	if (unlikely(!is_reserved(gpio_irq, gpio, 0))) {
+		if (system_state == SYSTEM_BOOTING)
+			dump_stack();
+		gpio_error(gpio);
+		hard_local_irq_restore(flags);
+		return;
+	}
+
+	unreserve(gpio_irq, gpio);
+
+	set_label(gpio, "free");
+
+	hard_local_irq_restore(flags);
+}
+
+static inline void __bfin_gpio_direction_input(unsigned gpio)
+{
+	gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
+	gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
+}
+
+int bfin_gpio_direction_input(unsigned gpio)
+{
+	unsigned long flags;
+
+	if (unlikely(!is_reserved(gpio, gpio, 0))) {
+		gpio_error(gpio);
+		return -EINVAL;
+	}
+
+	flags = hard_local_irq_save();
+	__bfin_gpio_direction_input(gpio);
+	AWA_DUMMY_READ(inen);
+	hard_local_irq_restore(flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(bfin_gpio_direction_input);
+
+void bfin_gpio_irq_prepare(unsigned gpio)
+{
+	port_setup(gpio, GPIO_USAGE);
+}
+
+void bfin_gpio_set_value(unsigned gpio, int arg)
+{
+	if (arg)
+		gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+	else
+		gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
+}
+EXPORT_SYMBOL(bfin_gpio_set_value);
+
+int bfin_gpio_direction_output(unsigned gpio, int value)
+{
+	unsigned long flags;
+
+	if (unlikely(!is_reserved(gpio, gpio, 0))) {
+		gpio_error(gpio);
+		return -EINVAL;
+	}
+
+	flags = hard_local_irq_save();
+
+	gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
+	gpio_set_value(gpio, value);
+	gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
+
+	AWA_DUMMY_READ(dir);
+	hard_local_irq_restore(flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(bfin_gpio_direction_output);
+
+int bfin_gpio_get_value(unsigned gpio)
+{
+	unsigned long flags;
+
+	if (unlikely(get_gpio_edge(gpio))) {
+		int ret;
+		flags = hard_local_irq_save();
+		set_gpio_edge(gpio, 0);
+		ret = get_gpio_data(gpio);
+		set_gpio_edge(gpio, 1);
+		hard_local_irq_restore(flags);
+		return ret;
+	} else
+		return get_gpio_data(gpio);
+}
+EXPORT_SYMBOL(bfin_gpio_get_value);
+
+/* If we are booting from SPI and our board lacks a strong enough pull up,
+ * the core can reset and execute the bootrom faster than the resistor can
+ * pull the signal logically high.  To work around this (common) error in
+ * board design, we explicitly set the pin back to GPIO mode, force /CS
+ * high, and wait for the electrons to do their thing.
+ *
+ * This function only makes sense to be called from reset code, but it
+ * lives here as we need to force all the GPIO states w/out going through
+ * BUG() checks and such.
+ */
+void bfin_reset_boot_spi_cs(unsigned short pin)
+{
+	unsigned short gpio = P_IDENT(pin);
+	port_setup(gpio, GPIO_USAGE);
+	gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+	AWA_DUMMY_READ(data_set);
+	udelay(1);
+}
+
+#if defined(CONFIG_PROC_FS)
+static int gpio_proc_show(struct seq_file *m, void *v)
+{
+	int c, irq, gpio;
+
+	for (c = 0; c < MAX_RESOURCES; c++) {
+		irq = is_reserved(gpio_irq, c, 1);
+		gpio = is_reserved(gpio, c, 1);
+		if (!check_gpio(c) && (gpio || irq))
+			seq_printf(m, "GPIO_%d: \t%s%s \t\tGPIO %s\n", c,
+				 get_label(c), (gpio && irq) ? " *" : "",
+				 get_gpio_dir(c) ? "OUTPUT" : "INPUT");
+		else if (is_reserved(peri, c, 1))
+			seq_printf(m, "GPIO_%d: \t%s \t\tPeripheral\n", c, get_label(c));
+		else
+			continue;
+	}
+
+	return 0;
+}
+
+static int gpio_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, gpio_proc_show, NULL);
+}
+
+static const struct file_operations gpio_proc_ops = {
+	.open		= gpio_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static __init int gpio_register_proc(void)
+{
+	struct proc_dir_entry *proc_gpio;
+
+	proc_gpio = proc_create("gpio", 0, NULL, &gpio_proc_ops);
+	return proc_gpio == NULL;
+}
+__initcall(gpio_register_proc);
+#endif
+
+#ifdef CONFIG_GPIOLIB
+static int bfin_gpiolib_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	return bfin_gpio_direction_input(gpio);
+}
+
+static int bfin_gpiolib_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
+{
+	return bfin_gpio_direction_output(gpio, level);
+}
+
+static int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	return !!bfin_gpio_get_value(gpio);
+}
+
+static void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+{
+	return bfin_gpio_set_value(gpio, value);
+}
+
+static int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio)
+{
+	return bfin_gpio_request(gpio, chip->label);
+}
+
+static void bfin_gpiolib_gpio_free(struct gpio_chip *chip, unsigned gpio)
+{
+	return bfin_gpio_free(gpio);
+}
+
+static int bfin_gpiolib_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+	return gpio + GPIO_IRQ_BASE;
+}
+
+static struct gpio_chip bfin_chip = {
+	.label			= "BFIN-GPIO",
+	.direction_input	= bfin_gpiolib_direction_input,
+	.get			= bfin_gpiolib_get_value,
+	.direction_output	= bfin_gpiolib_direction_output,
+	.set			= bfin_gpiolib_set_value,
+	.request		= bfin_gpiolib_gpio_request,
+	.free			= bfin_gpiolib_gpio_free,
+	.to_irq			= bfin_gpiolib_gpio_to_irq,
+	.base			= 0,
+	.ngpio			= MAX_BLACKFIN_GPIOS,
+};
+
+static int __init bfin_gpiolib_setup(void)
+{
+	return gpiochip_add_data(&bfin_chip, NULL);
+}
+arch_initcall(bfin_gpiolib_setup);
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/bfin_ksyms.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/bfin_ksyms.c
new file mode 100644
index 0000000..68096e8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/bfin_ksyms.c
@@ -0,0 +1,126 @@
+/*
+ * arch/blackfin/kernel/bfin_ksyms.c - exports for random symbols
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/uaccess.h>
+
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/irq_handler.h>
+
+/* Allow people to have their own Blackfin exception handler in a module */
+EXPORT_SYMBOL(bfin_return_from_exception);
+
+/* All the Blackfin cache functions: mach-common/cache.S */
+EXPORT_SYMBOL(blackfin_dcache_invalidate_range);
+EXPORT_SYMBOL(blackfin_icache_flush_range);
+EXPORT_SYMBOL(blackfin_dcache_flush_range);
+EXPORT_SYMBOL(blackfin_dflush_page);
+
+/* The following are special because they're not called
+ * explicitly (the C compiler generates them).  Fortunately,
+ * their interface isn't gonna change any time soon now, so
+ * it's OK to leave it out of version control.
+ */
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memcmp);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(memchr);
+
+/*
+ * Because string functions are both inline and exported functions and
+ * folder arch/blackfin/lib is configured as a library path in Makefile,
+ * symbols exported in folder lib  is not linked into built-in.o but
+ * inlined only. In order to export string symbols to kernel module
+ * properly, they should be exported here.
+ */
+EXPORT_SYMBOL(strcpy);
+EXPORT_SYMBOL(strncpy);
+EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strncmp);
+
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler...  (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+extern void __ashldi3(void);
+extern void __ashrdi3(void);
+extern void __smulsi3_highpart(void);
+extern void __umulsi3_highpart(void);
+extern void __divsi3(void);
+extern void __lshrdi3(void);
+extern void __modsi3(void);
+extern void __muldi3(void);
+extern void __udivsi3(void);
+extern void __umodsi3(void);
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__umulsi3_highpart);
+EXPORT_SYMBOL(__smulsi3_highpart);
+EXPORT_SYMBOL(__divsi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__modsi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__udivsi3);
+EXPORT_SYMBOL(__umodsi3);
+
+/* Input/output symbols: lib/{in,out}s.S */
+EXPORT_SYMBOL(outsb);
+EXPORT_SYMBOL(insb);
+EXPORT_SYMBOL(outsw);
+EXPORT_SYMBOL(outsw_8);
+EXPORT_SYMBOL(insw);
+EXPORT_SYMBOL(insw_8);
+EXPORT_SYMBOL(outsl);
+EXPORT_SYMBOL(insl);
+EXPORT_SYMBOL(insl_16);
+
+#ifdef CONFIG_SMP
+EXPORT_SYMBOL(__raw_atomic_add_asm);
+EXPORT_SYMBOL(__raw_atomic_xadd_asm);
+EXPORT_SYMBOL(__raw_atomic_and_asm);
+EXPORT_SYMBOL(__raw_atomic_or_asm);
+EXPORT_SYMBOL(__raw_atomic_xor_asm);
+EXPORT_SYMBOL(__raw_atomic_test_asm);
+
+EXPORT_SYMBOL(__raw_xchg_1_asm);
+EXPORT_SYMBOL(__raw_xchg_2_asm);
+EXPORT_SYMBOL(__raw_xchg_4_asm);
+EXPORT_SYMBOL(__raw_cmpxchg_1_asm);
+EXPORT_SYMBOL(__raw_cmpxchg_2_asm);
+EXPORT_SYMBOL(__raw_cmpxchg_4_asm);
+EXPORT_SYMBOL(__raw_spin_is_locked_asm);
+EXPORT_SYMBOL(__raw_spin_lock_asm);
+EXPORT_SYMBOL(__raw_spin_trylock_asm);
+EXPORT_SYMBOL(__raw_spin_unlock_asm);
+EXPORT_SYMBOL(__raw_read_lock_asm);
+EXPORT_SYMBOL(__raw_read_trylock_asm);
+EXPORT_SYMBOL(__raw_read_unlock_asm);
+EXPORT_SYMBOL(__raw_write_lock_asm);
+EXPORT_SYMBOL(__raw_write_trylock_asm);
+EXPORT_SYMBOL(__raw_write_unlock_asm);
+EXPORT_SYMBOL(__raw_bit_set_asm);
+EXPORT_SYMBOL(__raw_bit_clear_asm);
+EXPORT_SYMBOL(__raw_bit_toggle_asm);
+EXPORT_SYMBOL(__raw_bit_test_asm);
+EXPORT_SYMBOL(__raw_bit_test_set_asm);
+EXPORT_SYMBOL(__raw_bit_test_clear_asm);
+EXPORT_SYMBOL(__raw_bit_test_toggle_asm);
+EXPORT_SYMBOL(__raw_uncached_fetch_asm);
+#ifdef __ARCH_SYNC_CORE_DCACHE
+EXPORT_SYMBOL(__raw_smp_mark_barrier_asm);
+EXPORT_SYMBOL(__raw_smp_check_barrier_asm);
+#endif
+#endif
+
+#ifdef CONFIG_FUNCTION_TRACER
+extern void _mcount(void);
+EXPORT_SYMBOL(_mcount);
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-mpu/Makefile b/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-mpu/Makefile
new file mode 100644
index 0000000..394d0b1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-mpu/Makefile
@@ -0,0 +1,10 @@
+#
+# arch/blackfin/kernel/cplb-nompu/Makefile
+#
+
+obj-y := cplbinit.o cplbmgr.o
+
+CFLAGS_cplbmgr.o := -ffixed-I0 -ffixed-I1 -ffixed-I2 -ffixed-I3 \
+		    -ffixed-L0 -ffixed-L1 -ffixed-L2 -ffixed-L3 \
+		    -ffixed-M0 -ffixed-M1 -ffixed-M2 -ffixed-M3 \
+		    -ffixed-B0 -ffixed-B1 -ffixed-B2 -ffixed-B3
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-mpu/cplbinit.c
new file mode 100644
index 0000000..c15fd05
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -0,0 +1,102 @@
+/*
+ * Blackfin CPLB initialization
+ *
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+
+#include <asm/blackfin.h>
+#include <asm/cplb.h>
+#include <asm/cplbinit.h>
+#include <asm/mem_map.h>
+
+struct cplb_entry icplb_tbl[NR_CPUS][MAX_CPLBS];
+struct cplb_entry dcplb_tbl[NR_CPUS][MAX_CPLBS];
+
+int first_switched_icplb, first_switched_dcplb;
+int first_mask_dcplb;
+
+void __init generate_cplb_tables_cpu(unsigned int cpu)
+{
+	int i_d, i_i;
+	unsigned long addr;
+	unsigned long d_data, i_data;
+	unsigned long d_cache = 0, i_cache = 0;
+
+	printk(KERN_INFO "MPU: setting up cplb tables with memory protection\n");
+
+#ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
+	i_cache = CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
+#endif
+
+#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
+	d_cache = CPLB_L1_CHBL;
+#ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
+	d_cache |= CPLB_L1_AOW | CPLB_WT;
+#endif
+#endif
+
+	i_d = i_i = 0;
+
+	/* Set up the zero page.  */
+	dcplb_tbl[cpu][i_d].addr = 0;
+	dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+
+	icplb_tbl[cpu][i_i].addr = 0;
+	icplb_tbl[cpu][i_i++].data = CPLB_VALID | i_cache | CPLB_USER_RD | PAGE_SIZE_1KB;
+
+	/* Cover kernel memory with 4M pages.  */
+	addr = 0;
+	d_data = d_cache | CPLB_SUPV_WR | CPLB_VALID | PAGE_SIZE_4MB | CPLB_DIRTY;
+	i_data = i_cache | CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4MB;
+
+	for (; addr < memory_start; addr += 4 * 1024 * 1024) {
+		dcplb_tbl[cpu][i_d].addr = addr;
+		dcplb_tbl[cpu][i_d++].data = d_data;
+		icplb_tbl[cpu][i_i].addr = addr;
+		icplb_tbl[cpu][i_i++].data = i_data | (addr == 0 ? CPLB_USER_RD : 0);
+	}
+
+#ifdef CONFIG_ROMKERNEL
+	/* Cover kernel XIP flash area */
+	addr = CONFIG_ROM_BASE & ~(4 * 1024 * 1024 - 1);
+	dcplb_tbl[cpu][i_d].addr = addr;
+	dcplb_tbl[cpu][i_d++].data = d_data | CPLB_USER_RD;
+	icplb_tbl[cpu][i_i].addr = addr;
+	icplb_tbl[cpu][i_i++].data = i_data | CPLB_USER_RD;
+#endif
+
+	/* Cover L1 memory.  One 4M area for code and data each is enough.  */
+#if L1_DATA_A_LENGTH > 0 || L1_DATA_B_LENGTH > 0
+	dcplb_tbl[cpu][i_d].addr = get_l1_data_a_start_cpu(cpu);
+	dcplb_tbl[cpu][i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+#endif
+#if L1_CODE_LENGTH > 0
+	icplb_tbl[cpu][i_i].addr = get_l1_code_start_cpu(cpu);
+	icplb_tbl[cpu][i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
+#endif
+
+	/* Cover L2 memory */
+#if L2_LENGTH > 0
+	dcplb_tbl[cpu][i_d].addr = L2_START;
+	dcplb_tbl[cpu][i_d++].data = L2_DMEMORY;
+	icplb_tbl[cpu][i_i].addr = L2_START;
+	icplb_tbl[cpu][i_i++].data = L2_IMEMORY;
+#endif
+
+	first_mask_dcplb = i_d;
+	first_switched_dcplb = i_d + (1 << page_mask_order);
+	first_switched_icplb = i_i;
+
+	while (i_d < MAX_CPLBS)
+		dcplb_tbl[cpu][i_d++].data = 0;
+	while (i_i < MAX_CPLBS)
+		icplb_tbl[cpu][i_i++].data = 0;
+}
+
+void __init generate_cplb_tables_all(void)
+{
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
new file mode 100644
index 0000000..b56bd85
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -0,0 +1,379 @@
+/*
+ * Blackfin CPLB exception handling for when MPU in on
+ *
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/mm.h>
+
+#include <asm/blackfin.h>
+#include <asm/cacheflush.h>
+#include <asm/cplb.h>
+#include <asm/cplbinit.h>
+#include <asm/mmu_context.h>
+
+/*
+ * WARNING
+ *
+ * This file is compiled with certain -ffixed-reg options.  We have to
+ * make sure not to call any functions here that could clobber these
+ * registers.
+ */
+
+int page_mask_nelts;
+int page_mask_order;
+unsigned long *current_rwx_mask[NR_CPUS];
+
+int nr_dcplb_miss[NR_CPUS], nr_icplb_miss[NR_CPUS];
+int nr_icplb_supv_miss[NR_CPUS], nr_dcplb_prot[NR_CPUS];
+int nr_cplb_flush[NR_CPUS];
+
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+#define MGR_ATTR __attribute__((l1_text))
+#else
+#define MGR_ATTR
+#endif
+
+/*
+ * Given the contents of the status register, return the index of the
+ * CPLB that caused the fault.
+ */
+static inline int faulting_cplb_index(int status)
+{
+	int signbits = __builtin_bfin_norm_fr1x32(status & 0xFFFF);
+	return 30 - signbits;
+}
+
+/*
+ * Given the contents of the status register and the DCPLB_DATA contents,
+ * return true if a write access should be permitted.
+ */
+static inline int write_permitted(int status, unsigned long data)
+{
+	if (status & FAULT_USERSUPV)
+		return !!(data & CPLB_SUPV_WR);
+	else
+		return !!(data & CPLB_USER_WR);
+}
+
+/* Counters to implement round-robin replacement.  */
+static int icplb_rr_index[NR_CPUS], dcplb_rr_index[NR_CPUS];
+
+/*
+ * Find an ICPLB entry to be evicted and return its index.
+ */
+MGR_ATTR static int evict_one_icplb(unsigned int cpu)
+{
+	int i;
+	for (i = first_switched_icplb; i < MAX_CPLBS; i++)
+		if ((icplb_tbl[cpu][i].data & CPLB_VALID) == 0)
+			return i;
+	i = first_switched_icplb + icplb_rr_index[cpu];
+	if (i >= MAX_CPLBS) {
+		i -= MAX_CPLBS - first_switched_icplb;
+		icplb_rr_index[cpu] -= MAX_CPLBS - first_switched_icplb;
+	}
+	icplb_rr_index[cpu]++;
+	return i;
+}
+
+MGR_ATTR static int evict_one_dcplb(unsigned int cpu)
+{
+	int i;
+	for (i = first_switched_dcplb; i < MAX_CPLBS; i++)
+		if ((dcplb_tbl[cpu][i].data & CPLB_VALID) == 0)
+			return i;
+	i = first_switched_dcplb + dcplb_rr_index[cpu];
+	if (i >= MAX_CPLBS) {
+		i -= MAX_CPLBS - first_switched_dcplb;
+		dcplb_rr_index[cpu] -= MAX_CPLBS - first_switched_dcplb;
+	}
+	dcplb_rr_index[cpu]++;
+	return i;
+}
+
+MGR_ATTR static noinline int dcplb_miss(unsigned int cpu)
+{
+	unsigned long addr = bfin_read_DCPLB_FAULT_ADDR();
+	int status = bfin_read_DCPLB_STATUS();
+	unsigned long *mask;
+	int idx;
+	unsigned long d_data;
+
+	nr_dcplb_miss[cpu]++;
+
+	d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
+#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
+	if (bfin_addr_dcacheable(addr)) {
+		d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
+# ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
+		d_data |= CPLB_L1_AOW | CPLB_WT;
+# endif
+	}
+#endif
+
+	if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
+		addr = L2_START;
+		d_data = L2_DMEMORY;
+	} else if (addr >= physical_mem_end) {
+		if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
+#if defined(CONFIG_ROMFS_ON_MTD) && defined(CONFIG_MTD_ROM)
+			mask = current_rwx_mask[cpu];
+			if (mask) {
+				int page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> PAGE_SHIFT;
+				int idx = page >> 5;
+				int bit = 1 << (page & 31);
+
+				if (mask[idx] & bit)
+					d_data |= CPLB_USER_RD;
+			}
+#endif
+		} else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
+		    && (status & (FAULT_RW | FAULT_USERSUPV)) == FAULT_USERSUPV) {
+			addr &= ~(1 * 1024 * 1024 - 1);
+			d_data &= ~PAGE_SIZE_4KB;
+			d_data |= PAGE_SIZE_1MB;
+		} else
+			return CPLB_PROT_VIOL;
+	} else if (addr >= _ramend) {
+		d_data |= CPLB_USER_RD | CPLB_USER_WR;
+		if (reserved_mem_dcache_on)
+			d_data |= CPLB_L1_CHBL;
+	} else {
+		mask = current_rwx_mask[cpu];
+		if (mask) {
+			int page = addr >> PAGE_SHIFT;
+			int idx = page >> 5;
+			int bit = 1 << (page & 31);
+
+			if (mask[idx] & bit)
+				d_data |= CPLB_USER_RD;
+
+			mask += page_mask_nelts;
+			if (mask[idx] & bit)
+				d_data |= CPLB_USER_WR;
+		}
+	}
+	idx = evict_one_dcplb(cpu);
+
+	addr &= PAGE_MASK;
+	dcplb_tbl[cpu][idx].addr = addr;
+	dcplb_tbl[cpu][idx].data = d_data;
+
+	_disable_dcplb();
+	bfin_write32(DCPLB_DATA0 + idx * 4, d_data);
+	bfin_write32(DCPLB_ADDR0 + idx * 4, addr);
+	_enable_dcplb();
+
+	return 0;
+}
+
+MGR_ATTR static noinline int icplb_miss(unsigned int cpu)
+{
+	unsigned long addr = bfin_read_ICPLB_FAULT_ADDR();
+	int status = bfin_read_ICPLB_STATUS();
+	int idx;
+	unsigned long i_data;
+
+	nr_icplb_miss[cpu]++;
+
+	/* If inside the uncached DMA region, fault.  */
+	if (addr >= _ramend - DMA_UNCACHED_REGION && addr < _ramend)
+		return CPLB_PROT_VIOL;
+
+	if (status & FAULT_USERSUPV)
+		nr_icplb_supv_miss[cpu]++;
+
+	/*
+	 * First, try to find a CPLB that matches this address.  If we
+	 * find one, then the fact that we're in the miss handler means
+	 * that the instruction crosses a page boundary.
+	 */
+	for (idx = first_switched_icplb; idx < MAX_CPLBS; idx++) {
+		if (icplb_tbl[cpu][idx].data & CPLB_VALID) {
+			unsigned long this_addr = icplb_tbl[cpu][idx].addr;
+			if (this_addr <= addr && this_addr + PAGE_SIZE > addr) {
+				addr += PAGE_SIZE;
+				break;
+			}
+		}
+	}
+
+	i_data = CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4KB;
+
+#ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
+	/*
+	 * Normal RAM, and possibly the reserved memory area, are
+	 * cacheable.
+	 */
+	if (addr < _ramend ||
+	    (addr < physical_mem_end && reserved_mem_icache_on))
+		i_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
+#endif
+
+	if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
+		addr = L2_START;
+		i_data = L2_IMEMORY;
+	} else if (addr >= physical_mem_end) {
+		if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
+			if (!(status & FAULT_USERSUPV)) {
+				unsigned long *mask = current_rwx_mask[cpu];
+
+				if (mask) {
+					int page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> PAGE_SHIFT;
+					int idx = page >> 5;
+					int bit = 1 << (page & 31);
+
+					mask += 2 * page_mask_nelts;
+					if (mask[idx] & bit)
+						i_data |= CPLB_USER_RD;
+				}
+			}
+		} else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
+		    && (status & FAULT_USERSUPV)) {
+			addr &= ~(1 * 1024 * 1024 - 1);
+			i_data &= ~PAGE_SIZE_4KB;
+			i_data |= PAGE_SIZE_1MB;
+		} else
+		    return CPLB_PROT_VIOL;
+	} else if (addr >= _ramend) {
+		i_data |= CPLB_USER_RD;
+		if (reserved_mem_icache_on)
+			i_data |= CPLB_L1_CHBL;
+	} else {
+		/*
+		 * Two cases to distinguish - a supervisor access must
+		 * necessarily be for a module page; we grant it
+		 * unconditionally (could do better here in the future).
+		 * Otherwise, check the x bitmap of the current process.
+		 */
+		if (!(status & FAULT_USERSUPV)) {
+			unsigned long *mask = current_rwx_mask[cpu];
+
+			if (mask) {
+				int page = addr >> PAGE_SHIFT;
+				int idx = page >> 5;
+				int bit = 1 << (page & 31);
+
+				mask += 2 * page_mask_nelts;
+				if (mask[idx] & bit)
+					i_data |= CPLB_USER_RD;
+			}
+		}
+	}
+	idx = evict_one_icplb(cpu);
+	addr &= PAGE_MASK;
+	icplb_tbl[cpu][idx].addr = addr;
+	icplb_tbl[cpu][idx].data = i_data;
+
+	_disable_icplb();
+	bfin_write32(ICPLB_DATA0 + idx * 4, i_data);
+	bfin_write32(ICPLB_ADDR0 + idx * 4, addr);
+	_enable_icplb();
+
+	return 0;
+}
+
+MGR_ATTR static noinline int dcplb_protection_fault(unsigned int cpu)
+{
+	int status = bfin_read_DCPLB_STATUS();
+
+	nr_dcplb_prot[cpu]++;
+
+	if (status & FAULT_RW) {
+		int idx = faulting_cplb_index(status);
+		unsigned long data = dcplb_tbl[cpu][idx].data;
+		if (!(data & CPLB_WT) && !(data & CPLB_DIRTY) &&
+		    write_permitted(status, data)) {
+			data |= CPLB_DIRTY;
+			dcplb_tbl[cpu][idx].data = data;
+			bfin_write32(DCPLB_DATA0 + idx * 4, data);
+			return 0;
+		}
+	}
+	return CPLB_PROT_VIOL;
+}
+
+MGR_ATTR int cplb_hdr(int seqstat, struct pt_regs *regs)
+{
+	int cause = seqstat & 0x3f;
+	unsigned int cpu = raw_smp_processor_id();
+	switch (cause) {
+	case 0x23:
+		return dcplb_protection_fault(cpu);
+	case 0x2C:
+		return icplb_miss(cpu);
+	case 0x26:
+		return dcplb_miss(cpu);
+	default:
+		return 1;
+	}
+}
+
+void flush_switched_cplbs(unsigned int cpu)
+{
+	int i;
+	unsigned long flags;
+
+	nr_cplb_flush[cpu]++;
+
+	flags = hard_local_irq_save();
+	_disable_icplb();
+	for (i = first_switched_icplb; i < MAX_CPLBS; i++) {
+		icplb_tbl[cpu][i].data = 0;
+		bfin_write32(ICPLB_DATA0 + i * 4, 0);
+	}
+	_enable_icplb();
+
+	_disable_dcplb();
+	for (i = first_switched_dcplb; i < MAX_CPLBS; i++) {
+		dcplb_tbl[cpu][i].data = 0;
+		bfin_write32(DCPLB_DATA0 + i * 4, 0);
+	}
+	_enable_dcplb();
+	hard_local_irq_restore(flags);
+
+}
+
+void set_mask_dcplbs(unsigned long *masks, unsigned int cpu)
+{
+	int i;
+	unsigned long addr = (unsigned long)masks;
+	unsigned long d_data;
+	unsigned long flags;
+
+	if (!masks) {
+		current_rwx_mask[cpu] = masks;
+		return;
+	}
+
+	flags = hard_local_irq_save();
+	current_rwx_mask[cpu] = masks;
+
+	if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
+		addr = L2_START;
+		d_data = L2_DMEMORY;
+	} else {
+		d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
+#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
+		d_data |= CPLB_L1_CHBL;
+# ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
+		d_data |= CPLB_L1_AOW | CPLB_WT;
+# endif
+#endif
+	}
+
+	_disable_dcplb();
+	for (i = first_mask_dcplb; i < first_switched_dcplb; i++) {
+		dcplb_tbl[cpu][i].addr = addr;
+		dcplb_tbl[cpu][i].data = d_data;
+		bfin_write32(DCPLB_DATA0 + i * 4, d_data);
+		bfin_write32(DCPLB_ADDR0 + i * 4, addr);
+		addr += PAGE_SIZE;
+	}
+	_enable_dcplb();
+	hard_local_irq_restore(flags);
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-nompu/Makefile b/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-nompu/Makefile
new file mode 100644
index 0000000..81baa27
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-nompu/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# arch/blackfin/kernel/cplb-nompu/Makefile
+#
+
+obj-y := cplbinit.o cplbmgr.o
+
+CFLAGS_cplbmgr.o := -ffixed-I0 -ffixed-I1 -ffixed-I2 -ffixed-I3 \
+		    -ffixed-L0 -ffixed-L1 -ffixed-L2 -ffixed-L3 \
+		    -ffixed-M0 -ffixed-M1 -ffixed-M2 -ffixed-M3 \
+		    -ffixed-B0 -ffixed-B1 -ffixed-B2 -ffixed-B3
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-nompu/cplbinit.c
new file mode 100644
index 0000000..b49a53b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -0,0 +1,212 @@
+/*
+ * Blackfin CPLB initialization
+ *
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+
+#include <asm/blackfin.h>
+#include <asm/cacheflush.h>
+#include <asm/cplb.h>
+#include <asm/cplbinit.h>
+#include <asm/mem_map.h>
+
+struct cplb_entry icplb_tbl[NR_CPUS][MAX_CPLBS] PDT_ATTR;
+struct cplb_entry dcplb_tbl[NR_CPUS][MAX_CPLBS] PDT_ATTR;
+
+int first_switched_icplb PDT_ATTR;
+int first_switched_dcplb PDT_ATTR;
+
+struct cplb_boundary dcplb_bounds[9] PDT_ATTR;
+struct cplb_boundary icplb_bounds[9] PDT_ATTR;
+
+int icplb_nr_bounds PDT_ATTR;
+int dcplb_nr_bounds PDT_ATTR;
+
+void __init generate_cplb_tables_cpu(unsigned int cpu)
+{
+	int i_d, i_i;
+	unsigned long addr;
+	unsigned long cplb_pageflags, cplb_pagesize;
+
+	struct cplb_entry *d_tbl = dcplb_tbl[cpu];
+	struct cplb_entry *i_tbl = icplb_tbl[cpu];
+
+	printk(KERN_INFO "NOMPU: setting up cplb tables\n");
+
+	i_d = i_i = 0;
+
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
+	/* Set up the zero page.  */
+	d_tbl[i_d].addr = 0;
+	d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+	i_tbl[i_i].addr = 0;
+	i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+#endif
+
+	/* Cover kernel memory with 4M pages.  */
+	addr = 0;
+
+#ifdef PAGE_SIZE_16MB
+	cplb_pageflags = PAGE_SIZE_16MB;
+	cplb_pagesize = SIZE_16M;
+#else
+	cplb_pageflags = PAGE_SIZE_4MB;
+	cplb_pagesize = SIZE_4M;
+#endif
+
+
+	for (; addr < memory_start; addr += cplb_pagesize) {
+		d_tbl[i_d].addr = addr;
+		d_tbl[i_d++].data = SDRAM_DGENERIC | cplb_pageflags;
+		i_tbl[i_i].addr = addr;
+		i_tbl[i_i++].data = SDRAM_IGENERIC | cplb_pageflags;
+	}
+
+#ifdef CONFIG_ROMKERNEL
+	/* Cover kernel XIP flash area */
+#ifdef CONFIG_BF60x
+	addr = CONFIG_ROM_BASE & ~(16 * 1024 * 1024 - 1);
+	d_tbl[i_d].addr = addr;
+	d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_16MB;
+	i_tbl[i_i].addr = addr;
+	i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_16MB;
+#else
+	addr = CONFIG_ROM_BASE & ~(4 * 1024 * 1024 - 1);
+	d_tbl[i_d].addr = addr;
+	d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_4MB;
+	i_tbl[i_i].addr = addr;
+	i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_4MB;
+#endif
+#endif
+
+	/* Cover L1 memory.  One 4M area for code and data each is enough.  */
+	if (cpu == 0) {
+		if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+			d_tbl[i_d].addr = L1_DATA_A_START;
+			d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+		}
+		i_tbl[i_i].addr = L1_CODE_START;
+		i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
+	}
+#ifdef CONFIG_SMP
+	else {
+		if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+			d_tbl[i_d].addr = COREB_L1_DATA_A_START;
+			d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+		}
+		i_tbl[i_i].addr = COREB_L1_CODE_START;
+		i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
+	}
+#endif
+	first_switched_dcplb = i_d;
+	first_switched_icplb = i_i;
+
+	BUG_ON(first_switched_dcplb > MAX_CPLBS);
+	BUG_ON(first_switched_icplb > MAX_CPLBS);
+
+	while (i_d < MAX_CPLBS)
+		d_tbl[i_d++].data = 0;
+	while (i_i < MAX_CPLBS)
+		i_tbl[i_i++].data = 0;
+}
+
+void __init generate_cplb_tables_all(void)
+{
+	unsigned long uncached_end;
+	int i_d, i_i;
+
+	i_d = 0;
+	/* Normal RAM, including MTD FS.  */
+#ifdef CONFIG_MTD_UCLINUX
+	uncached_end = memory_mtd_start + mtd_size;
+#else
+	uncached_end = memory_end;
+#endif
+	/*
+	 * if DMA uncached is less than 1MB, mark the 1MB chunk as uncached
+	 * so that we don't have to use 4kB pages and cause CPLB thrashing
+	 */
+	if ((DMA_UNCACHED_REGION >= 1 * 1024 * 1024) || !DMA_UNCACHED_REGION ||
+	    ((_ramend - uncached_end) >= 1 * 1024 * 1024))
+		dcplb_bounds[i_d].eaddr = uncached_end;
+	else
+		dcplb_bounds[i_d].eaddr = uncached_end & ~(1 * 1024 * 1024 - 1);
+	dcplb_bounds[i_d++].data = SDRAM_DGENERIC;
+	/* DMA uncached region.  */
+	if (DMA_UNCACHED_REGION) {
+		dcplb_bounds[i_d].eaddr = _ramend;
+		dcplb_bounds[i_d++].data = SDRAM_DNON_CHBL;
+	}
+	if (_ramend != physical_mem_end) {
+		/* Reserved memory.  */
+		dcplb_bounds[i_d].eaddr = physical_mem_end;
+		dcplb_bounds[i_d++].data = (reserved_mem_dcache_on ?
+					    SDRAM_DGENERIC : SDRAM_DNON_CHBL);
+	}
+	/* Addressing hole up to the async bank.  */
+	dcplb_bounds[i_d].eaddr = ASYNC_BANK0_BASE;
+	dcplb_bounds[i_d++].data = 0;
+	/* ASYNC banks.  */
+	dcplb_bounds[i_d].eaddr = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE;
+	dcplb_bounds[i_d++].data = SDRAM_EBIU;
+	/* Addressing hole up to BootROM.  */
+	dcplb_bounds[i_d].eaddr = BOOT_ROM_START;
+	dcplb_bounds[i_d++].data = 0;
+	/* BootROM -- largest one should be less than 1 meg.  */
+	dcplb_bounds[i_d].eaddr = BOOT_ROM_START + BOOT_ROM_LENGTH;
+	dcplb_bounds[i_d++].data = SDRAM_DGENERIC;
+	if (L2_LENGTH) {
+		/* Addressing hole up to L2 SRAM.  */
+		dcplb_bounds[i_d].eaddr = L2_START;
+		dcplb_bounds[i_d++].data = 0;
+		/* L2 SRAM.  */
+		dcplb_bounds[i_d].eaddr = L2_START + L2_LENGTH;
+		dcplb_bounds[i_d++].data = L2_DMEMORY;
+	}
+	dcplb_nr_bounds = i_d;
+	BUG_ON(dcplb_nr_bounds > ARRAY_SIZE(dcplb_bounds));
+
+	i_i = 0;
+	/* Normal RAM, including MTD FS.  */
+	icplb_bounds[i_i].eaddr = uncached_end;
+	icplb_bounds[i_i++].data = SDRAM_IGENERIC;
+	if (_ramend != physical_mem_end) {
+		/* DMA uncached region.  */
+		if (DMA_UNCACHED_REGION) {
+			/* Normally this hole is caught by the async below.  */
+			icplb_bounds[i_i].eaddr = _ramend;
+			icplb_bounds[i_i++].data = 0;
+		}
+		/* Reserved memory.  */
+		icplb_bounds[i_i].eaddr = physical_mem_end;
+		icplb_bounds[i_i++].data = (reserved_mem_icache_on ?
+					    SDRAM_IGENERIC : SDRAM_INON_CHBL);
+	}
+	/* Addressing hole up to the async bank.  */
+	icplb_bounds[i_i].eaddr = ASYNC_BANK0_BASE;
+	icplb_bounds[i_i++].data = 0;
+	/* ASYNC banks.  */
+	icplb_bounds[i_i].eaddr = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE;
+	icplb_bounds[i_i++].data = SDRAM_EBIU;
+	/* Addressing hole up to BootROM.  */
+	icplb_bounds[i_i].eaddr = BOOT_ROM_START;
+	icplb_bounds[i_i++].data = 0;
+	/* BootROM -- largest one should be less than 1 meg.  */
+	icplb_bounds[i_i].eaddr = BOOT_ROM_START + BOOT_ROM_LENGTH;
+	icplb_bounds[i_i++].data = SDRAM_IGENERIC;
+
+	if (L2_LENGTH) {
+		/* Addressing hole up to L2 SRAM.  */
+		icplb_bounds[i_i].eaddr = L2_START;
+		icplb_bounds[i_i++].data = 0;
+		/* L2 SRAM.  */
+		icplb_bounds[i_i].eaddr = L2_START + L2_LENGTH;
+		icplb_bounds[i_i++].data = L2_IMEMORY;
+	}
+	icplb_nr_bounds = i_i;
+	BUG_ON(icplb_nr_bounds > ARRAY_SIZE(icplb_bounds));
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
new file mode 100644
index 0000000..79cc0f6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
@@ -0,0 +1,227 @@
+/*
+ * Based on:     arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+ * Author:       Michael McTernan <mmcternan@airvana.com>
+ *
+ * Description:  CPLB miss handler.
+ *
+ * Modified:
+ *               Copyright 2008 Airvana Inc.
+ *               Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/kernel.h>
+#include <asm/blackfin.h>
+#include <asm/cplbinit.h>
+#include <asm/cplb.h>
+#include <asm/mmu_context.h>
+#include <asm/traps.h>
+
+/*
+ * WARNING
+ *
+ * This file is compiled with certain -ffixed-reg options.  We have to
+ * make sure not to call any functions here that could clobber these
+ * registers.
+ */
+
+int nr_dcplb_miss[NR_CPUS], nr_icplb_miss[NR_CPUS];
+int nr_dcplb_supv_miss[NR_CPUS], nr_icplb_supv_miss[NR_CPUS];
+int nr_cplb_flush[NR_CPUS], nr_dcplb_prot[NR_CPUS];
+
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+#define MGR_ATTR __attribute__((l1_text))
+#else
+#define MGR_ATTR
+#endif
+
+static inline void write_dcplb_data(int cpu, int idx, unsigned long data,
+				    unsigned long addr)
+{
+	_disable_dcplb();
+	bfin_write32(DCPLB_DATA0 + idx * 4, data);
+	bfin_write32(DCPLB_ADDR0 + idx * 4, addr);
+	_enable_dcplb();
+
+#ifdef CONFIG_CPLB_INFO
+	dcplb_tbl[cpu][idx].addr = addr;
+	dcplb_tbl[cpu][idx].data = data;
+#endif
+}
+
+static inline void write_icplb_data(int cpu, int idx, unsigned long data,
+				    unsigned long addr)
+{
+	_disable_icplb();
+	bfin_write32(ICPLB_DATA0 + idx * 4, data);
+	bfin_write32(ICPLB_ADDR0 + idx * 4, addr);
+	_enable_icplb();
+
+#ifdef CONFIG_CPLB_INFO
+	icplb_tbl[cpu][idx].addr = addr;
+	icplb_tbl[cpu][idx].data = data;
+#endif
+}
+
+/* Counters to implement round-robin replacement.  */
+static int icplb_rr_index[NR_CPUS] PDT_ATTR;
+static int dcplb_rr_index[NR_CPUS] PDT_ATTR;
+
+/*
+ * Find an ICPLB entry to be evicted and return its index.
+ */
+static int evict_one_icplb(int cpu)
+{
+	int i = first_switched_icplb + icplb_rr_index[cpu];
+	if (i >= MAX_CPLBS) {
+		i -= MAX_CPLBS - first_switched_icplb;
+		icplb_rr_index[cpu] -= MAX_CPLBS - first_switched_icplb;
+	}
+	icplb_rr_index[cpu]++;
+	return i;
+}
+
+static int evict_one_dcplb(int cpu)
+{
+	int i = first_switched_dcplb + dcplb_rr_index[cpu];
+	if (i >= MAX_CPLBS) {
+		i -= MAX_CPLBS - first_switched_dcplb;
+		dcplb_rr_index[cpu] -= MAX_CPLBS - first_switched_dcplb;
+	}
+	dcplb_rr_index[cpu]++;
+	return i;
+}
+
+MGR_ATTR static int icplb_miss(int cpu)
+{
+	unsigned long addr = bfin_read_ICPLB_FAULT_ADDR();
+	int status = bfin_read_ICPLB_STATUS();
+	int idx;
+	unsigned long i_data, base, addr1, eaddr;
+
+	nr_icplb_miss[cpu]++;
+	if (unlikely(status & FAULT_USERSUPV))
+		nr_icplb_supv_miss[cpu]++;
+
+	base = 0;
+	idx = 0;
+	do {
+		eaddr = icplb_bounds[idx].eaddr;
+		if (addr < eaddr)
+			break;
+		base = eaddr;
+	} while (++idx < icplb_nr_bounds);
+
+	if (unlikely(idx == icplb_nr_bounds))
+		return CPLB_NO_ADDR_MATCH;
+
+	i_data = icplb_bounds[idx].data;
+	if (unlikely(i_data == 0))
+		return CPLB_NO_ADDR_MATCH;
+
+	addr1 = addr & ~(SIZE_4M - 1);
+	addr &= ~(SIZE_1M - 1);
+	i_data |= PAGE_SIZE_1MB;
+	if (addr1 >= base && (addr1 + SIZE_4M) <= eaddr) {
+		/*
+		 * This works because
+		 * (PAGE_SIZE_4MB & PAGE_SIZE_1MB) == PAGE_SIZE_1MB.
+		 */
+		i_data |= PAGE_SIZE_4MB;
+		addr = addr1;
+	}
+
+	/* Pick entry to evict */
+	idx = evict_one_icplb(cpu);
+
+	write_icplb_data(cpu, idx, i_data, addr);
+
+	return CPLB_RELOADED;
+}
+
+MGR_ATTR static int dcplb_miss(int cpu)
+{
+	unsigned long addr = bfin_read_DCPLB_FAULT_ADDR();
+	int status = bfin_read_DCPLB_STATUS();
+	int idx;
+	unsigned long d_data, base, addr1, eaddr, cplb_pagesize, cplb_pageflags;
+
+	nr_dcplb_miss[cpu]++;
+	if (unlikely(status & FAULT_USERSUPV))
+		nr_dcplb_supv_miss[cpu]++;
+
+	base = 0;
+	idx = 0;
+	do {
+		eaddr = dcplb_bounds[idx].eaddr;
+		if (addr < eaddr)
+			break;
+		base = eaddr;
+	} while (++idx < dcplb_nr_bounds);
+
+	if (unlikely(idx == dcplb_nr_bounds))
+		return CPLB_NO_ADDR_MATCH;
+
+	d_data = dcplb_bounds[idx].data;
+	if (unlikely(d_data == 0))
+		return CPLB_NO_ADDR_MATCH;
+
+	addr &= ~(SIZE_1M - 1);
+	d_data |= PAGE_SIZE_1MB;
+
+	/* BF60x support large than 4M CPLB page size */
+#ifdef PAGE_SIZE_16MB
+	cplb_pageflags = PAGE_SIZE_16MB;
+	cplb_pagesize = SIZE_16M;
+#else
+	cplb_pageflags = PAGE_SIZE_4MB;
+	cplb_pagesize = SIZE_4M;
+#endif
+
+find_pagesize:
+	addr1 = addr & ~(cplb_pagesize - 1);
+	if (addr1 >= base && (addr1 + cplb_pagesize) <= eaddr) {
+		/*
+		 * This works because
+		 * (PAGE_SIZE_4MB & PAGE_SIZE_1MB) == PAGE_SIZE_1MB.
+		 */
+		d_data |= cplb_pageflags;
+		addr = addr1;
+		goto found_pagesize;
+	} else {
+		if (cplb_pagesize > SIZE_4M) {
+			cplb_pageflags = PAGE_SIZE_4MB;
+			cplb_pagesize = SIZE_4M;
+			goto find_pagesize;
+		}
+	}
+
+found_pagesize:
+#ifdef CONFIG_BF60x
+	if ((addr >= ASYNC_BANK0_BASE)
+		&& (addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE))
+		d_data |= PAGE_SIZE_64MB;
+#endif
+
+	/* Pick entry to evict */
+	idx = evict_one_dcplb(cpu);
+
+	write_dcplb_data(cpu, idx, d_data, addr);
+
+	return CPLB_RELOADED;
+}
+
+MGR_ATTR int cplb_hdr(int seqstat, struct pt_regs *regs)
+{
+	int cause = seqstat & 0x3f;
+	unsigned int cpu = raw_smp_processor_id();
+	switch (cause) {
+	case VEC_CPLB_I_M:
+		return icplb_miss(cpu);
+	case VEC_CPLB_M:
+		return dcplb_miss(cpu);
+	default:
+		return CPLB_UNKNOWN_ERR;
+	}
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/cplbinfo.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/cplbinfo.c
new file mode 100644
index 0000000..5b80d59
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/cplbinfo.c
@@ -0,0 +1,180 @@
+/*
+ * arch/blackfin/kernel/cplbinfo.c - display CPLB status
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/ctype.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+
+#include <asm/cplbinit.h>
+#include <asm/blackfin.h>
+
+static char const page_strtbl[][4] = {
+	"1K", "4K", "1M", "4M",
+#ifdef CONFIG_BF60x
+	"16K", "64K", "16M", "64M",
+#endif
+};
+#define page(flags)    (((flags) & 0x70000) >> 16)
+#define strpage(flags) page_strtbl[page(flags)]
+
+struct cplbinfo_data {
+	loff_t pos;
+	char cplb_type;
+	u32 mem_control;
+	struct cplb_entry *tbl;
+	int switched;
+};
+
+static void cplbinfo_print_header(struct seq_file *m)
+{
+	seq_printf(m, "Index\tAddress\t\tData\tSize\tU/RD\tU/WR\tS/WR\tSwitch\n");
+}
+
+static int cplbinfo_nomore(struct cplbinfo_data *cdata)
+{
+	return cdata->pos >= MAX_CPLBS;
+}
+
+static int cplbinfo_show(struct seq_file *m, void *p)
+{
+	struct cplbinfo_data *cdata;
+	unsigned long data, addr;
+	loff_t pos;
+
+	cdata = p;
+	pos = cdata->pos;
+	addr = cdata->tbl[pos].addr;
+	data = cdata->tbl[pos].data;
+
+	seq_printf(m,
+		"%d\t0x%08lx\t%05lx\t%s\t%c\t%c\t%c\t%c\n",
+		(int)pos, addr, data, strpage(data),
+		(data & CPLB_USER_RD) ? 'Y' : 'N',
+		(data & CPLB_USER_WR) ? 'Y' : 'N',
+		(data & CPLB_SUPV_WR) ? 'Y' : 'N',
+		pos < cdata->switched ? 'N' : 'Y');
+
+	return 0;
+}
+
+static void cplbinfo_seq_init(struct cplbinfo_data *cdata, unsigned int cpu)
+{
+	if (cdata->cplb_type == 'I') {
+		cdata->mem_control = bfin_read_IMEM_CONTROL();
+		cdata->tbl = icplb_tbl[cpu];
+		cdata->switched = first_switched_icplb;
+	} else {
+		cdata->mem_control = bfin_read_DMEM_CONTROL();
+		cdata->tbl = dcplb_tbl[cpu];
+		cdata->switched = first_switched_dcplb;
+	}
+}
+
+static void *cplbinfo_start(struct seq_file *m, loff_t *pos)
+{
+	struct cplbinfo_data *cdata = m->private;
+
+	if (!*pos) {
+		seq_printf(m, "%cCPLBs are %sabled: 0x%x\n", cdata->cplb_type,
+			(cdata->mem_control & ENDCPLB ? "en" : "dis"),
+			cdata->mem_control);
+		cplbinfo_print_header(m);
+	} else if (cplbinfo_nomore(cdata))
+		return NULL;
+
+	get_cpu();
+	return cdata;
+}
+
+static void *cplbinfo_next(struct seq_file *m, void *p, loff_t *pos)
+{
+	struct cplbinfo_data *cdata = p;
+	cdata->pos = ++(*pos);
+	if (cplbinfo_nomore(cdata))
+		return NULL;
+	else
+		return cdata;
+}
+
+static void cplbinfo_stop(struct seq_file *m, void *p)
+{
+	put_cpu();
+}
+
+static const struct seq_operations cplbinfo_sops = {
+	.start = cplbinfo_start,
+	.next  = cplbinfo_next,
+	.stop  = cplbinfo_stop,
+	.show  = cplbinfo_show,
+};
+
+#define CPLBINFO_DCPLB_FLAG 0x80000000
+
+static int cplbinfo_open(struct inode *inode, struct file *file)
+{
+	char cplb_type;
+	unsigned int cpu = (unsigned long)PDE_DATA(file_inode(file));
+	int ret;
+	struct seq_file *m;
+	struct cplbinfo_data *cdata;
+
+	cplb_type = cpu & CPLBINFO_DCPLB_FLAG ? 'D' : 'I';
+	cpu &= ~CPLBINFO_DCPLB_FLAG;
+
+	if (!cpu_online(cpu))
+		return -ENODEV;
+
+	ret = seq_open_private(file, &cplbinfo_sops, sizeof(*cdata));
+	if (ret)
+		return ret;
+	m = file->private_data;
+	cdata = m->private;
+
+	cdata->pos = 0;
+	cdata->cplb_type = cplb_type;
+	cplbinfo_seq_init(cdata, cpu);
+
+	return 0;
+}
+
+static const struct file_operations cplbinfo_fops = {
+	.open    = cplbinfo_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = seq_release_private,
+};
+
+static int __init cplbinfo_init(void)
+{
+	struct proc_dir_entry *cplb_dir, *cpu_dir;
+	char buf[10];
+	unsigned int cpu;
+
+	cplb_dir = proc_mkdir("cplbinfo", NULL);
+	if (!cplb_dir)
+		return -ENOMEM;
+
+	for_each_possible_cpu(cpu) {
+		sprintf(buf, "cpu%i", cpu);
+		cpu_dir = proc_mkdir(buf, cplb_dir);
+		if (!cpu_dir)
+			return -ENOMEM;
+
+		proc_create_data("icplb", S_IRUGO, cpu_dir, &cplbinfo_fops,
+			(void *)cpu);
+		proc_create_data("dcplb", S_IRUGO, cpu_dir, &cplbinfo_fops,
+			(void *)(cpu | CPLBINFO_DCPLB_FLAG));
+	}
+
+	return 0;
+}
+late_initcall(cplbinfo_init);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/debug-mmrs.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/debug-mmrs.c
new file mode 100644
index 0000000..f31ace2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/debug-mmrs.c
@@ -0,0 +1,1891 @@
+/*
+ * debugfs interface to core/system MMRs
+ *
+ * Copyright 2007-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/debugfs.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+
+#include <asm/blackfin.h>
+#include <asm/gptimers.h>
+#include <asm/bfin_can.h>
+#include <asm/bfin_dma.h>
+#include <asm/bfin_ppi.h>
+#include <asm/bfin_serial.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/bfin_twi.h>
+
+/* Common code defines PORT_MUX on us, so redirect the MMR back locally */
+#ifdef BFIN_PORT_MUX
+#undef PORT_MUX
+#define PORT_MUX BFIN_PORT_MUX
+#endif
+
+#define _d(name, bits, addr, perms) debugfs_create_x##bits(name, perms, parent, (u##bits *)(addr))
+#define d(name, bits, addr)         _d(name, bits, addr, S_IRUSR|S_IWUSR)
+#define d_RO(name, bits, addr)      _d(name, bits, addr, S_IRUSR)
+#define d_WO(name, bits, addr)      _d(name, bits, addr, S_IWUSR)
+
+#define D_RO(name, bits) d_RO(#name, bits, name)
+#define D_WO(name, bits) d_WO(#name, bits, name)
+#define D32(name)        d(#name, 32, name)
+#define D16(name)        d(#name, 16, name)
+
+#define REGS_OFF(peri, mmr) offsetof(struct bfin_##peri##_regs, mmr)
+#define __REGS(peri, sname, rname) \
+	do { \
+		struct bfin_##peri##_regs r; \
+		void *addr = (void *)(base + REGS_OFF(peri, rname)); \
+		strcpy(_buf, sname); \
+		if (sizeof(r.rname) == 2) \
+			debugfs_create_x16(buf, S_IRUSR|S_IWUSR, parent, addr); \
+		else \
+			debugfs_create_x32(buf, S_IRUSR|S_IWUSR, parent, addr); \
+	} while (0)
+#define REGS_STR_PFX(buf, pfx, num) \
+	({ \
+		buf + (num >= 0 ? \
+			sprintf(buf, #pfx "%i_", num) : \
+			sprintf(buf, #pfx "_")); \
+	})
+#define REGS_STR_PFX_C(buf, pfx, num) \
+	({ \
+		buf + (num >= 0 ? \
+			sprintf(buf, #pfx "%c_", 'A' + num) : \
+			sprintf(buf, #pfx "_")); \
+	})
+
+/*
+ * Core registers (not memory mapped)
+ */
+extern u32 last_seqstat;
+
+static int debug_cclk_get(void *data, u64 *val)
+{
+	*val = get_cclk();
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_debug_cclk, debug_cclk_get, NULL, "0x%08llx\n");
+
+static int debug_sclk_get(void *data, u64 *val)
+{
+	*val = get_sclk();
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_debug_sclk, debug_sclk_get, NULL, "0x%08llx\n");
+
+#define DEFINE_SYSREG(sr, pre, post) \
+static int sysreg_##sr##_get(void *data, u64 *val) \
+{ \
+	unsigned long tmp; \
+	pre; \
+	__asm__ __volatile__("%0 = " #sr ";" : "=d"(tmp)); \
+	*val = tmp; \
+	return 0; \
+} \
+static int sysreg_##sr##_set(void *data, u64 val) \
+{ \
+	unsigned long tmp = val; \
+	__asm__ __volatile__(#sr " = %0;" : : "d"(tmp)); \
+	post; \
+	return 0; \
+} \
+DEFINE_SIMPLE_ATTRIBUTE(fops_sysreg_##sr, sysreg_##sr##_get, sysreg_##sr##_set, "0x%08llx\n")
+
+DEFINE_SYSREG(cycles, , );
+DEFINE_SYSREG(cycles2, __asm__ __volatile__("%0 = cycles;" : "=d"(tmp)), );
+DEFINE_SYSREG(emudat, , );
+DEFINE_SYSREG(seqstat, , );
+DEFINE_SYSREG(syscfg, , CSYNC());
+#define D_SYSREG(sr) debugfs_create_file(#sr, S_IRUSR|S_IWUSR, parent, NULL, &fops_sysreg_##sr)
+
+#ifndef CONFIG_BF60x
+/*
+ * CAN
+ */
+#define CAN_OFF(mmr)  REGS_OFF(can, mmr)
+#define __CAN(uname, lname) __REGS(can, #uname, lname)
+static void __init __maybe_unused
+bfin_debug_mmrs_can(struct dentry *parent, unsigned long base, int num)
+{
+	static struct dentry *am, *mb;
+	int i, j;
+	char buf[32], *_buf = REGS_STR_PFX(buf, CAN, num);
+
+	if (!am) {
+		am = debugfs_create_dir("am", parent);
+		mb = debugfs_create_dir("mb", parent);
+	}
+
+	__CAN(MC1, mc1);
+	__CAN(MD1, md1);
+	__CAN(TRS1, trs1);
+	__CAN(TRR1, trr1);
+	__CAN(TA1, ta1);
+	__CAN(AA1, aa1);
+	__CAN(RMP1, rmp1);
+	__CAN(RML1, rml1);
+	__CAN(MBTIF1, mbtif1);
+	__CAN(MBRIF1, mbrif1);
+	__CAN(MBIM1, mbim1);
+	__CAN(RFH1, rfh1);
+	__CAN(OPSS1, opss1);
+
+	__CAN(MC2, mc2);
+	__CAN(MD2, md2);
+	__CAN(TRS2, trs2);
+	__CAN(TRR2, trr2);
+	__CAN(TA2, ta2);
+	__CAN(AA2, aa2);
+	__CAN(RMP2, rmp2);
+	__CAN(RML2, rml2);
+	__CAN(MBTIF2, mbtif2);
+	__CAN(MBRIF2, mbrif2);
+	__CAN(MBIM2, mbim2);
+	__CAN(RFH2, rfh2);
+	__CAN(OPSS2, opss2);
+
+	__CAN(CLOCK, clock);
+	__CAN(TIMING, timing);
+	__CAN(DEBUG, debug);
+	__CAN(STATUS, status);
+	__CAN(CEC, cec);
+	__CAN(GIS, gis);
+	__CAN(GIM, gim);
+	__CAN(GIF, gif);
+	__CAN(CONTROL, control);
+	__CAN(INTR, intr);
+	__CAN(VERSION, version);
+	__CAN(MBTD, mbtd);
+	__CAN(EWR, ewr);
+	__CAN(ESR, esr);
+	/*__CAN(UCREG, ucreg); no longer exists */
+	__CAN(UCCNT, uccnt);
+	__CAN(UCRC, ucrc);
+	__CAN(UCCNF, uccnf);
+	__CAN(VERSION2, version2);
+
+	for (i = 0; i < 32; ++i) {
+		sprintf(_buf, "AM%02iL", i);
+		debugfs_create_x16(buf, S_IRUSR|S_IWUSR, am,
+			(u16 *)(base + CAN_OFF(msk[i].aml)));
+		sprintf(_buf, "AM%02iH", i);
+		debugfs_create_x16(buf, S_IRUSR|S_IWUSR, am,
+			(u16 *)(base + CAN_OFF(msk[i].amh)));
+
+		for (j = 0; j < 3; ++j) {
+			sprintf(_buf, "MB%02i_DATA%i", i, j);
+			debugfs_create_x16(buf, S_IRUSR|S_IWUSR, mb,
+				(u16 *)(base + CAN_OFF(chl[i].data[j*2])));
+		}
+		sprintf(_buf, "MB%02i_LENGTH", i);
+		debugfs_create_x16(buf, S_IRUSR|S_IWUSR, mb,
+			(u16 *)(base + CAN_OFF(chl[i].dlc)));
+		sprintf(_buf, "MB%02i_TIMESTAMP", i);
+		debugfs_create_x16(buf, S_IRUSR|S_IWUSR, mb,
+			(u16 *)(base + CAN_OFF(chl[i].tsv)));
+		sprintf(_buf, "MB%02i_ID0", i);
+		debugfs_create_x16(buf, S_IRUSR|S_IWUSR, mb,
+			(u16 *)(base + CAN_OFF(chl[i].id0)));
+		sprintf(_buf, "MB%02i_ID1", i);
+		debugfs_create_x16(buf, S_IRUSR|S_IWUSR, mb,
+			(u16 *)(base + CAN_OFF(chl[i].id1)));
+	}
+}
+#define CAN(num) bfin_debug_mmrs_can(parent, CAN##num##_MC1, num)
+
+/*
+ * DMA
+ */
+#define __DMA(uname, lname) __REGS(dma, #uname, lname)
+static void __init __maybe_unused
+bfin_debug_mmrs_dma(struct dentry *parent, unsigned long base, int num, char mdma, const char *pfx)
+{
+	char buf[32], *_buf;
+
+	if (mdma)
+		_buf = buf + sprintf(buf, "%s_%c%i_", pfx, mdma, num);
+	else
+		_buf = buf + sprintf(buf, "%s%i_", pfx, num);
+
+	__DMA(NEXT_DESC_PTR, next_desc_ptr);
+	__DMA(START_ADDR, start_addr);
+	__DMA(CONFIG, config);
+	__DMA(X_COUNT, x_count);
+	__DMA(X_MODIFY, x_modify);
+	__DMA(Y_COUNT, y_count);
+	__DMA(Y_MODIFY, y_modify);
+	__DMA(CURR_DESC_PTR, curr_desc_ptr);
+	__DMA(CURR_ADDR, curr_addr);
+	__DMA(IRQ_STATUS, irq_status);
+#ifndef CONFIG_BF60x
+	if (strcmp(pfx, "IMDMA") != 0)
+		__DMA(PERIPHERAL_MAP, peripheral_map);
+#endif
+	__DMA(CURR_X_COUNT, curr_x_count);
+	__DMA(CURR_Y_COUNT, curr_y_count);
+}
+#define _DMA(num, base, mdma, pfx) bfin_debug_mmrs_dma(parent, base, num, mdma, pfx "DMA")
+#define DMA(num)  _DMA(num, DMA##num##_NEXT_DESC_PTR, 0, "")
+#define _MDMA(num, x) \
+	do { \
+		_DMA(num, x##DMA_D##num##_NEXT_DESC_PTR, 'D', #x); \
+		_DMA(num, x##DMA_S##num##_NEXT_DESC_PTR, 'S', #x); \
+	} while (0)
+#define MDMA(num) _MDMA(num, M)
+#define IMDMA(num) _MDMA(num, IM)
+
+/*
+ * EPPI
+ */
+#define __EPPI(uname, lname) __REGS(eppi, #uname, lname)
+static void __init __maybe_unused
+bfin_debug_mmrs_eppi(struct dentry *parent, unsigned long base, int num)
+{
+	char buf[32], *_buf = REGS_STR_PFX(buf, EPPI, num);
+	__EPPI(STATUS, status);
+	__EPPI(HCOUNT, hcount);
+	__EPPI(HDELAY, hdelay);
+	__EPPI(VCOUNT, vcount);
+	__EPPI(VDELAY, vdelay);
+	__EPPI(FRAME, frame);
+	__EPPI(LINE, line);
+	__EPPI(CLKDIV, clkdiv);
+	__EPPI(CONTROL, control);
+	__EPPI(FS1W_HBL, fs1w_hbl);
+	__EPPI(FS1P_AVPL, fs1p_avpl);
+	__EPPI(FS2W_LVB, fs2w_lvb);
+	__EPPI(FS2P_LAVF, fs2p_lavf);
+	__EPPI(CLIP, clip);
+}
+#define EPPI(num) bfin_debug_mmrs_eppi(parent, EPPI##num##_STATUS, num)
+
+/*
+ * General Purpose Timers
+ */
+#define __GPTIMER(uname, lname) __REGS(gptimer, #uname, lname)
+static void __init __maybe_unused
+bfin_debug_mmrs_gptimer(struct dentry *parent, unsigned long base, int num)
+{
+	char buf[32], *_buf = REGS_STR_PFX(buf, TIMER, num);
+	__GPTIMER(CONFIG, config);
+	__GPTIMER(COUNTER, counter);
+	__GPTIMER(PERIOD, period);
+	__GPTIMER(WIDTH, width);
+}
+#define GPTIMER(num) bfin_debug_mmrs_gptimer(parent, TIMER##num##_CONFIG, num)
+
+#define GPTIMER_GROUP_OFF(mmr) REGS_OFF(gptimer_group, mmr)
+#define __GPTIMER_GROUP(uname, lname) __REGS(gptimer_group, #uname, lname)
+static void __init __maybe_unused
+bfin_debug_mmrs_gptimer_group(struct dentry *parent, unsigned long base, int num)
+{
+	char buf[32], *_buf;
+
+	if (num == -1) {
+		_buf = buf + sprintf(buf, "TIMER_");
+		__GPTIMER_GROUP(ENABLE, enable);
+		__GPTIMER_GROUP(DISABLE, disable);
+		__GPTIMER_GROUP(STATUS, status);
+	} else {
+		/* These MMRs are a bit odd as the group # is a suffix */
+		_buf = buf + sprintf(buf, "TIMER_ENABLE%i", num);
+		d(buf, 16, base + GPTIMER_GROUP_OFF(enable));
+
+		_buf = buf + sprintf(buf, "TIMER_DISABLE%i", num);
+		d(buf, 16, base + GPTIMER_GROUP_OFF(disable));
+
+		_buf = buf + sprintf(buf, "TIMER_STATUS%i", num);
+		d(buf, 32, base + GPTIMER_GROUP_OFF(status));
+	}
+}
+#define GPTIMER_GROUP(mmr, num) bfin_debug_mmrs_gptimer_group(parent, mmr, num)
+
+/*
+ * Handshake MDMA
+ */
+#define __HMDMA(uname, lname) __REGS(hmdma, #uname, lname)
+static void __init __maybe_unused
+bfin_debug_mmrs_hmdma(struct dentry *parent, unsigned long base, int num)
+{
+	char buf[32], *_buf = REGS_STR_PFX(buf, HMDMA, num);
+	__HMDMA(CONTROL, control);
+	__HMDMA(ECINIT, ecinit);
+	__HMDMA(BCINIT, bcinit);
+	__HMDMA(ECURGENT, ecurgent);
+	__HMDMA(ECOVERFLOW, ecoverflow);
+	__HMDMA(ECOUNT, ecount);
+	__HMDMA(BCOUNT, bcount);
+}
+#define HMDMA(num) bfin_debug_mmrs_hmdma(parent, HMDMA##num##_CONTROL, num)
+
+/*
+ * Peripheral Interrupts (PINT/GPIO)
+ */
+#ifdef PINT0_MASK_SET
+#define __PINT(uname, lname) __REGS(pint, #uname, lname)
+static void __init __maybe_unused
+bfin_debug_mmrs_pint(struct dentry *parent, unsigned long base, int num)
+{
+	char buf[32], *_buf = REGS_STR_PFX(buf, PINT, num);
+	__PINT(MASK_SET, mask_set);
+	__PINT(MASK_CLEAR, mask_clear);
+	__PINT(REQUEST, request);
+	__PINT(ASSIGN, assign);
+	__PINT(EDGE_SET, edge_set);
+	__PINT(EDGE_CLEAR, edge_clear);
+	__PINT(INVERT_SET, invert_set);
+	__PINT(INVERT_CLEAR, invert_clear);
+	__PINT(PINSTATE, pinstate);
+	__PINT(LATCH, latch);
+}
+#define PINT(num) bfin_debug_mmrs_pint(parent, PINT##num##_MASK_SET, num)
+#endif
+
+/*
+ * Port/GPIO
+ */
+#define bfin_gpio_regs gpio_port_t
+#define __PORT(uname, lname) __REGS(gpio, #uname, lname)
+static void __init __maybe_unused
+bfin_debug_mmrs_port(struct dentry *parent, unsigned long base, int num)
+{
+	char buf[32], *_buf;
+#ifdef __ADSPBF54x__
+	_buf = REGS_STR_PFX_C(buf, PORT, num);
+	__PORT(FER, port_fer);
+	__PORT(SET, data_set);
+	__PORT(CLEAR, data_clear);
+	__PORT(DIR_SET, dir_set);
+	__PORT(DIR_CLEAR, dir_clear);
+	__PORT(INEN, inen);
+	__PORT(MUX, port_mux);
+#else
+	_buf = buf + sprintf(buf, "PORT%cIO_", num);
+	__PORT(CLEAR, data_clear);
+	__PORT(SET, data_set);
+	__PORT(TOGGLE, toggle);
+	__PORT(MASKA, maska);
+	__PORT(MASKA_CLEAR, maska_clear);
+	__PORT(MASKA_SET, maska_set);
+	__PORT(MASKA_TOGGLE, maska_toggle);
+	__PORT(MASKB, maskb);
+	__PORT(MASKB_CLEAR, maskb_clear);
+	__PORT(MASKB_SET, maskb_set);
+	__PORT(MASKB_TOGGLE, maskb_toggle);
+	__PORT(DIR, dir);
+	__PORT(POLAR, polar);
+	__PORT(EDGE, edge);
+	__PORT(BOTH, both);
+	__PORT(INEN, inen);
+#endif
+	_buf[-1] = '\0';
+	d(buf, 16, base + REGS_OFF(gpio, data));
+}
+#define PORT(base, num) bfin_debug_mmrs_port(parent, base, num)
+
+/*
+ * PPI
+ */
+#define __PPI(uname, lname) __REGS(ppi, #uname, lname)
+static void __init __maybe_unused
+bfin_debug_mmrs_ppi(struct dentry *parent, unsigned long base, int num)
+{
+	char buf[32], *_buf = REGS_STR_PFX(buf, PPI, num);
+	__PPI(CONTROL, control);
+	__PPI(STATUS, status);
+	__PPI(COUNT, count);
+	__PPI(DELAY, delay);
+	__PPI(FRAME, frame);
+}
+#define PPI(num) bfin_debug_mmrs_ppi(parent, PPI##num##_CONTROL, num)
+
+/*
+ * SPI
+ */
+#define __SPI(uname, lname) __REGS(spi, #uname, lname)
+static void __init __maybe_unused
+bfin_debug_mmrs_spi(struct dentry *parent, unsigned long base, int num)
+{
+	char buf[32], *_buf = REGS_STR_PFX(buf, SPI, num);
+	__SPI(CTL, ctl);
+	__SPI(FLG, flg);
+	__SPI(STAT, stat);
+	__SPI(TDBR, tdbr);
+	__SPI(RDBR, rdbr);
+	__SPI(BAUD, baud);
+	__SPI(SHADOW, shadow);
+}
+#define SPI(num) bfin_debug_mmrs_spi(parent, SPI##num##_REGBASE, num)
+
+/*
+ * SPORT
+ */
+static inline int sport_width(void *mmr)
+{
+	unsigned long lmmr = (unsigned long)mmr;
+	if ((lmmr & 0xff) == 0x10)
+		/* SPORT#_TX has 0x10 offset -> SPORT#_TCR2 has 0x04 offset */
+		lmmr -= 0xc;
+	else
+		/* SPORT#_RX has 0x18 offset -> SPORT#_RCR2 has 0x24 offset */
+		lmmr += 0xc;
+	/* extract SLEN field from control register 2 and add 1 */
+	return (bfin_read16(lmmr) & 0x1f) + 1;
+}
+static int sport_set(void *mmr, u64 val)
+{
+	unsigned long flags;
+	local_irq_save(flags);
+	if (sport_width(mmr) <= 16)
+		bfin_write16(mmr, val);
+	else
+		bfin_write32(mmr, val);
+	local_irq_restore(flags);
+	return 0;
+}
+static int sport_get(void *mmr, u64 *val)
+{
+	unsigned long flags;
+	local_irq_save(flags);
+	if (sport_width(mmr) <= 16)
+		*val = bfin_read16(mmr);
+	else
+		*val = bfin_read32(mmr);
+	local_irq_restore(flags);
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_sport, sport_get, sport_set, "0x%08llx\n");
+/*DEFINE_SIMPLE_ATTRIBUTE(fops_sport_ro, sport_get, NULL, "0x%08llx\n");*/
+DEFINE_SIMPLE_ATTRIBUTE(fops_sport_wo, NULL, sport_set, "0x%08llx\n");
+#define SPORT_OFF(mmr) (SPORT0_##mmr - SPORT0_TCR1)
+#define _D_SPORT(name, perms, fops) \
+	do { \
+		strcpy(_buf, #name); \
+		debugfs_create_file(buf, perms, parent, (void *)(base + SPORT_OFF(name)), fops); \
+	} while (0)
+#define __SPORT_RW(name) _D_SPORT(name, S_IRUSR|S_IWUSR, &fops_sport)
+#define __SPORT_RO(name) _D_SPORT(name, S_IRUSR, &fops_sport_ro)
+#define __SPORT_WO(name) _D_SPORT(name, S_IWUSR, &fops_sport_wo)
+#define __SPORT(name, bits) \
+	do { \
+		strcpy(_buf, #name); \
+		debugfs_create_x##bits(buf, S_IRUSR|S_IWUSR, parent, (u##bits *)(base + SPORT_OFF(name))); \
+	} while (0)
+static void __init __maybe_unused
+bfin_debug_mmrs_sport(struct dentry *parent, unsigned long base, int num)
+{
+	char buf[32], *_buf = REGS_STR_PFX(buf, SPORT, num);
+	__SPORT(CHNL, 16);
+	__SPORT(MCMC1, 16);
+	__SPORT(MCMC2, 16);
+	__SPORT(MRCS0, 32);
+	__SPORT(MRCS1, 32);
+	__SPORT(MRCS2, 32);
+	__SPORT(MRCS3, 32);
+	__SPORT(MTCS0, 32);
+	__SPORT(MTCS1, 32);
+	__SPORT(MTCS2, 32);
+	__SPORT(MTCS3, 32);
+	__SPORT(RCLKDIV, 16);
+	__SPORT(RCR1, 16);
+	__SPORT(RCR2, 16);
+	__SPORT(RFSDIV, 16);
+	__SPORT_RW(RX);
+	__SPORT(STAT, 16);
+	__SPORT(TCLKDIV, 16);
+	__SPORT(TCR1, 16);
+	__SPORT(TCR2, 16);
+	__SPORT(TFSDIV, 16);
+	__SPORT_WO(TX);
+}
+#define SPORT(num) bfin_debug_mmrs_sport(parent, SPORT##num##_TCR1, num)
+
+/*
+ * TWI
+ */
+#define __TWI(uname, lname) __REGS(twi, #uname, lname)
+static void __init __maybe_unused
+bfin_debug_mmrs_twi(struct dentry *parent, unsigned long base, int num)
+{
+	char buf[32], *_buf = REGS_STR_PFX(buf, TWI, num);
+	__TWI(CLKDIV, clkdiv);
+	__TWI(CONTROL, control);
+	__TWI(SLAVE_CTL, slave_ctl);
+	__TWI(SLAVE_STAT, slave_stat);
+	__TWI(SLAVE_ADDR, slave_addr);
+	__TWI(MASTER_CTL, master_ctl);
+	__TWI(MASTER_STAT, master_stat);
+	__TWI(MASTER_ADDR, master_addr);
+	__TWI(INT_STAT, int_stat);
+	__TWI(INT_MASK, int_mask);
+	__TWI(FIFO_CTL, fifo_ctl);
+	__TWI(FIFO_STAT, fifo_stat);
+	__TWI(XMT_DATA8, xmt_data8);
+	__TWI(XMT_DATA16, xmt_data16);
+	__TWI(RCV_DATA8, rcv_data8);
+	__TWI(RCV_DATA16, rcv_data16);
+}
+#define TWI(num) bfin_debug_mmrs_twi(parent, TWI##num##_CLKDIV, num)
+
+/*
+ * UART
+ */
+#define __UART(uname, lname) __REGS(uart, #uname, lname)
+static void __init __maybe_unused
+bfin_debug_mmrs_uart(struct dentry *parent, unsigned long base, int num)
+{
+	char buf[32], *_buf = REGS_STR_PFX(buf, UART, num);
+#ifdef BFIN_UART_BF54X_STYLE
+	__UART(DLL, dll);
+	__UART(DLH, dlh);
+	__UART(GCTL, gctl);
+	__UART(LCR, lcr);
+	__UART(MCR, mcr);
+	__UART(LSR, lsr);
+	__UART(MSR, msr);
+	__UART(SCR, scr);
+	__UART(IER_SET, ier_set);
+	__UART(IER_CLEAR, ier_clear);
+	__UART(THR, thr);
+	__UART(RBR, rbr);
+#else
+	__UART(DLL, dll);
+	__UART(THR, thr);
+	__UART(RBR, rbr);
+	__UART(DLH, dlh);
+	__UART(IER, ier);
+	__UART(IIR, iir);
+	__UART(LCR, lcr);
+	__UART(MCR, mcr);
+	__UART(LSR, lsr);
+	__UART(MSR, msr);
+	__UART(SCR, scr);
+	__UART(GCTL, gctl);
+#endif
+}
+#define UART(num) bfin_debug_mmrs_uart(parent, UART##num##_DLL, num)
+#endif /* CONFIG_BF60x */
+/*
+ * The actual debugfs generation
+ */
+static struct dentry *debug_mmrs_dentry;
+
+static int __init bfin_debug_mmrs_init(void)
+{
+	struct dentry *top, *parent;
+
+	pr_info("debug-mmrs: setting up Blackfin MMR debugfs\n");
+
+	top = debugfs_create_dir("blackfin", NULL);
+	if (top == NULL)
+		return -1;
+
+	parent = debugfs_create_dir("core_regs", top);
+	debugfs_create_file("cclk", S_IRUSR, parent, NULL, &fops_debug_cclk);
+	debugfs_create_file("sclk", S_IRUSR, parent, NULL, &fops_debug_sclk);
+	debugfs_create_x32("last_seqstat", S_IRUSR, parent, &last_seqstat);
+	D_SYSREG(cycles);
+	D_SYSREG(cycles2);
+	D_SYSREG(emudat);
+	D_SYSREG(seqstat);
+	D_SYSREG(syscfg);
+
+	/* Core MMRs */
+	parent = debugfs_create_dir("ctimer", top);
+	D32(TCNTL);
+	D32(TCOUNT);
+	D32(TPERIOD);
+	D32(TSCALE);
+
+	parent = debugfs_create_dir("cec", top);
+	D32(EVT0);
+	D32(EVT1);
+	D32(EVT2);
+	D32(EVT3);
+	D32(EVT4);
+	D32(EVT5);
+	D32(EVT6);
+	D32(EVT7);
+	D32(EVT8);
+	D32(EVT9);
+	D32(EVT10);
+	D32(EVT11);
+	D32(EVT12);
+	D32(EVT13);
+	D32(EVT14);
+	D32(EVT15);
+	D32(EVT_OVERRIDE);
+	D32(IMASK);
+	D32(IPEND);
+	D32(ILAT);
+	D32(IPRIO);
+
+	parent = debugfs_create_dir("debug", top);
+	D32(DBGSTAT);
+	D32(DSPID);
+
+	parent = debugfs_create_dir("mmu", top);
+	D32(SRAM_BASE_ADDRESS);
+	D32(DCPLB_ADDR0);
+	D32(DCPLB_ADDR10);
+	D32(DCPLB_ADDR11);
+	D32(DCPLB_ADDR12);
+	D32(DCPLB_ADDR13);
+	D32(DCPLB_ADDR14);
+	D32(DCPLB_ADDR15);
+	D32(DCPLB_ADDR1);
+	D32(DCPLB_ADDR2);
+	D32(DCPLB_ADDR3);
+	D32(DCPLB_ADDR4);
+	D32(DCPLB_ADDR5);
+	D32(DCPLB_ADDR6);
+	D32(DCPLB_ADDR7);
+	D32(DCPLB_ADDR8);
+	D32(DCPLB_ADDR9);
+	D32(DCPLB_DATA0);
+	D32(DCPLB_DATA10);
+	D32(DCPLB_DATA11);
+	D32(DCPLB_DATA12);
+	D32(DCPLB_DATA13);
+	D32(DCPLB_DATA14);
+	D32(DCPLB_DATA15);
+	D32(DCPLB_DATA1);
+	D32(DCPLB_DATA2);
+	D32(DCPLB_DATA3);
+	D32(DCPLB_DATA4);
+	D32(DCPLB_DATA5);
+	D32(DCPLB_DATA6);
+	D32(DCPLB_DATA7);
+	D32(DCPLB_DATA8);
+	D32(DCPLB_DATA9);
+	D32(DCPLB_FAULT_ADDR);
+	D32(DCPLB_STATUS);
+	D32(DMEM_CONTROL);
+	D32(DTEST_COMMAND);
+	D32(DTEST_DATA0);
+	D32(DTEST_DATA1);
+
+	D32(ICPLB_ADDR0);
+	D32(ICPLB_ADDR1);
+	D32(ICPLB_ADDR2);
+	D32(ICPLB_ADDR3);
+	D32(ICPLB_ADDR4);
+	D32(ICPLB_ADDR5);
+	D32(ICPLB_ADDR6);
+	D32(ICPLB_ADDR7);
+	D32(ICPLB_ADDR8);
+	D32(ICPLB_ADDR9);
+	D32(ICPLB_ADDR10);
+	D32(ICPLB_ADDR11);
+	D32(ICPLB_ADDR12);
+	D32(ICPLB_ADDR13);
+	D32(ICPLB_ADDR14);
+	D32(ICPLB_ADDR15);
+	D32(ICPLB_DATA0);
+	D32(ICPLB_DATA1);
+	D32(ICPLB_DATA2);
+	D32(ICPLB_DATA3);
+	D32(ICPLB_DATA4);
+	D32(ICPLB_DATA5);
+	D32(ICPLB_DATA6);
+	D32(ICPLB_DATA7);
+	D32(ICPLB_DATA8);
+	D32(ICPLB_DATA9);
+	D32(ICPLB_DATA10);
+	D32(ICPLB_DATA11);
+	D32(ICPLB_DATA12);
+	D32(ICPLB_DATA13);
+	D32(ICPLB_DATA14);
+	D32(ICPLB_DATA15);
+	D32(ICPLB_FAULT_ADDR);
+	D32(ICPLB_STATUS);
+	D32(IMEM_CONTROL);
+	if (!ANOMALY_05000481) {
+		D32(ITEST_COMMAND);
+		D32(ITEST_DATA0);
+		D32(ITEST_DATA1);
+	}
+
+	parent = debugfs_create_dir("perf", top);
+	D32(PFCNTR0);
+	D32(PFCNTR1);
+	D32(PFCTL);
+
+	parent = debugfs_create_dir("trace", top);
+	D32(TBUF);
+	D32(TBUFCTL);
+	D32(TBUFSTAT);
+
+	parent = debugfs_create_dir("watchpoint", top);
+	D32(WPIACTL);
+	D32(WPIA0);
+	D32(WPIA1);
+	D32(WPIA2);
+	D32(WPIA3);
+	D32(WPIA4);
+	D32(WPIA5);
+	D32(WPIACNT0);
+	D32(WPIACNT1);
+	D32(WPIACNT2);
+	D32(WPIACNT3);
+	D32(WPIACNT4);
+	D32(WPIACNT5);
+	D32(WPDACTL);
+	D32(WPDA0);
+	D32(WPDA1);
+	D32(WPDACNT0);
+	D32(WPDACNT1);
+	D32(WPSTAT);
+#ifndef CONFIG_BF60x
+	/* System MMRs */
+#ifdef ATAPI_CONTROL
+	parent = debugfs_create_dir("atapi", top);
+	D16(ATAPI_CONTROL);
+	D16(ATAPI_DEV_ADDR);
+	D16(ATAPI_DEV_RXBUF);
+	D16(ATAPI_DEV_TXBUF);
+	D16(ATAPI_DMA_TFRCNT);
+	D16(ATAPI_INT_MASK);
+	D16(ATAPI_INT_STATUS);
+	D16(ATAPI_LINE_STATUS);
+	D16(ATAPI_MULTI_TIM_0);
+	D16(ATAPI_MULTI_TIM_1);
+	D16(ATAPI_MULTI_TIM_2);
+	D16(ATAPI_PIO_TFRCNT);
+	D16(ATAPI_PIO_TIM_0);
+	D16(ATAPI_PIO_TIM_1);
+	D16(ATAPI_REG_TIM_0);
+	D16(ATAPI_SM_STATE);
+	D16(ATAPI_STATUS);
+	D16(ATAPI_TERMINATE);
+	D16(ATAPI_UDMAOUT_TFRCNT);
+	D16(ATAPI_ULTRA_TIM_0);
+	D16(ATAPI_ULTRA_TIM_1);
+	D16(ATAPI_ULTRA_TIM_2);
+	D16(ATAPI_ULTRA_TIM_3);
+	D16(ATAPI_UMAIN_TFRCNT);
+	D16(ATAPI_XFER_LEN);
+#endif
+
+#if defined(CAN_MC1) || defined(CAN0_MC1) || defined(CAN1_MC1)
+	parent = debugfs_create_dir("can", top);
+# ifdef CAN_MC1
+	bfin_debug_mmrs_can(parent, CAN_MC1, -1);
+# endif
+# ifdef CAN0_MC1
+	CAN(0);
+# endif
+# ifdef CAN1_MC1
+	CAN(1);
+# endif
+#endif
+
+#ifdef CNT_COMMAND
+	parent = debugfs_create_dir("counter", top);
+	D16(CNT_COMMAND);
+	D16(CNT_CONFIG);
+	D32(CNT_COUNTER);
+	D16(CNT_DEBOUNCE);
+	D16(CNT_IMASK);
+	D32(CNT_MAX);
+	D32(CNT_MIN);
+	D16(CNT_STATUS);
+#endif
+
+	parent = debugfs_create_dir("dmac", top);
+#ifdef DMAC_TC_CNT
+	D16(DMAC_TC_CNT);
+	D16(DMAC_TC_PER);
+#endif
+#ifdef DMAC0_TC_CNT
+	D16(DMAC0_TC_CNT);
+	D16(DMAC0_TC_PER);
+#endif
+#ifdef DMAC1_TC_CNT
+	D16(DMAC1_TC_CNT);
+	D16(DMAC1_TC_PER);
+#endif
+#ifdef DMAC1_PERIMUX
+	D16(DMAC1_PERIMUX);
+#endif
+
+#ifdef __ADSPBF561__
+	/* XXX: should rewrite the MMR map */
+# define DMA0_NEXT_DESC_PTR DMA2_0_NEXT_DESC_PTR
+# define DMA1_NEXT_DESC_PTR DMA2_1_NEXT_DESC_PTR
+# define DMA2_NEXT_DESC_PTR DMA2_2_NEXT_DESC_PTR
+# define DMA3_NEXT_DESC_PTR DMA2_3_NEXT_DESC_PTR
+# define DMA4_NEXT_DESC_PTR DMA2_4_NEXT_DESC_PTR
+# define DMA5_NEXT_DESC_PTR DMA2_5_NEXT_DESC_PTR
+# define DMA6_NEXT_DESC_PTR DMA2_6_NEXT_DESC_PTR
+# define DMA7_NEXT_DESC_PTR DMA2_7_NEXT_DESC_PTR
+# define DMA8_NEXT_DESC_PTR DMA2_8_NEXT_DESC_PTR
+# define DMA9_NEXT_DESC_PTR DMA2_9_NEXT_DESC_PTR
+# define DMA10_NEXT_DESC_PTR DMA2_10_NEXT_DESC_PTR
+# define DMA11_NEXT_DESC_PTR DMA2_11_NEXT_DESC_PTR
+# define DMA12_NEXT_DESC_PTR DMA1_0_NEXT_DESC_PTR
+# define DMA13_NEXT_DESC_PTR DMA1_1_NEXT_DESC_PTR
+# define DMA14_NEXT_DESC_PTR DMA1_2_NEXT_DESC_PTR
+# define DMA15_NEXT_DESC_PTR DMA1_3_NEXT_DESC_PTR
+# define DMA16_NEXT_DESC_PTR DMA1_4_NEXT_DESC_PTR
+# define DMA17_NEXT_DESC_PTR DMA1_5_NEXT_DESC_PTR
+# define DMA18_NEXT_DESC_PTR DMA1_6_NEXT_DESC_PTR
+# define DMA19_NEXT_DESC_PTR DMA1_7_NEXT_DESC_PTR
+# define DMA20_NEXT_DESC_PTR DMA1_8_NEXT_DESC_PTR
+# define DMA21_NEXT_DESC_PTR DMA1_9_NEXT_DESC_PTR
+# define DMA22_NEXT_DESC_PTR DMA1_10_NEXT_DESC_PTR
+# define DMA23_NEXT_DESC_PTR DMA1_11_NEXT_DESC_PTR
+#endif
+	parent = debugfs_create_dir("dma", top);
+	DMA(0);
+	DMA(1);
+	DMA(1);
+	DMA(2);
+	DMA(3);
+	DMA(4);
+	DMA(5);
+	DMA(6);
+	DMA(7);
+#ifdef DMA8_NEXT_DESC_PTR
+	DMA(8);
+	DMA(9);
+	DMA(10);
+	DMA(11);
+#endif
+#ifdef DMA12_NEXT_DESC_PTR
+	DMA(12);
+	DMA(13);
+	DMA(14);
+	DMA(15);
+	DMA(16);
+	DMA(17);
+	DMA(18);
+	DMA(19);
+#endif
+#ifdef DMA20_NEXT_DESC_PTR
+	DMA(20);
+	DMA(21);
+	DMA(22);
+	DMA(23);
+#endif
+
+	parent = debugfs_create_dir("ebiu_amc", top);
+	D32(EBIU_AMBCTL0);
+	D32(EBIU_AMBCTL1);
+	D16(EBIU_AMGCTL);
+#ifdef EBIU_MBSCTL
+	D16(EBIU_MBSCTL);
+	D32(EBIU_ARBSTAT);
+	D32(EBIU_MODE);
+	D16(EBIU_FCTL);
+#endif
+
+#ifdef EBIU_SDGCTL
+	parent = debugfs_create_dir("ebiu_sdram", top);
+# ifdef __ADSPBF561__
+	D32(EBIU_SDBCTL);
+# else
+	D16(EBIU_SDBCTL);
+# endif
+	D32(EBIU_SDGCTL);
+	D16(EBIU_SDRRC);
+	D16(EBIU_SDSTAT);
+#endif
+
+#ifdef EBIU_DDRACCT
+	parent = debugfs_create_dir("ebiu_ddr", top);
+	D32(EBIU_DDRACCT);
+	D32(EBIU_DDRARCT);
+	D32(EBIU_DDRBRC0);
+	D32(EBIU_DDRBRC1);
+	D32(EBIU_DDRBRC2);
+	D32(EBIU_DDRBRC3);
+	D32(EBIU_DDRBRC4);
+	D32(EBIU_DDRBRC5);
+	D32(EBIU_DDRBRC6);
+	D32(EBIU_DDRBRC7);
+	D32(EBIU_DDRBWC0);
+	D32(EBIU_DDRBWC1);
+	D32(EBIU_DDRBWC2);
+	D32(EBIU_DDRBWC3);
+	D32(EBIU_DDRBWC4);
+	D32(EBIU_DDRBWC5);
+	D32(EBIU_DDRBWC6);
+	D32(EBIU_DDRBWC7);
+	D32(EBIU_DDRCTL0);
+	D32(EBIU_DDRCTL1);
+	D32(EBIU_DDRCTL2);
+	D32(EBIU_DDRCTL3);
+	D32(EBIU_DDRGC0);
+	D32(EBIU_DDRGC1);
+	D32(EBIU_DDRGC2);
+	D32(EBIU_DDRGC3);
+	D32(EBIU_DDRMCCL);
+	D32(EBIU_DDRMCEN);
+	D32(EBIU_DDRQUE);
+	D32(EBIU_DDRTACT);
+	D32(EBIU_ERRADD);
+	D16(EBIU_ERRMST);
+	D16(EBIU_RSTCTL);
+#endif
+
+#ifdef EMAC_ADDRHI
+	parent = debugfs_create_dir("emac", top);
+	D32(EMAC_ADDRHI);
+	D32(EMAC_ADDRLO);
+	D32(EMAC_FLC);
+	D32(EMAC_HASHHI);
+	D32(EMAC_HASHLO);
+	D32(EMAC_MMC_CTL);
+	D32(EMAC_MMC_RIRQE);
+	D32(EMAC_MMC_RIRQS);
+	D32(EMAC_MMC_TIRQE);
+	D32(EMAC_MMC_TIRQS);
+	D32(EMAC_OPMODE);
+	D32(EMAC_RXC_ALIGN);
+	D32(EMAC_RXC_ALLFRM);
+	D32(EMAC_RXC_ALLOCT);
+	D32(EMAC_RXC_BROAD);
+	D32(EMAC_RXC_DMAOVF);
+	D32(EMAC_RXC_EQ64);
+	D32(EMAC_RXC_FCS);
+	D32(EMAC_RXC_GE1024);
+	D32(EMAC_RXC_LNERRI);
+	D32(EMAC_RXC_LNERRO);
+	D32(EMAC_RXC_LONG);
+	D32(EMAC_RXC_LT1024);
+	D32(EMAC_RXC_LT128);
+	D32(EMAC_RXC_LT256);
+	D32(EMAC_RXC_LT512);
+	D32(EMAC_RXC_MACCTL);
+	D32(EMAC_RXC_MULTI);
+	D32(EMAC_RXC_OCTET);
+	D32(EMAC_RXC_OK);
+	D32(EMAC_RXC_OPCODE);
+	D32(EMAC_RXC_PAUSE);
+	D32(EMAC_RXC_SHORT);
+	D32(EMAC_RXC_TYPED);
+	D32(EMAC_RXC_UNICST);
+	D32(EMAC_RX_IRQE);
+	D32(EMAC_RX_STAT);
+	D32(EMAC_RX_STKY);
+	D32(EMAC_STAADD);
+	D32(EMAC_STADAT);
+	D32(EMAC_SYSCTL);
+	D32(EMAC_SYSTAT);
+	D32(EMAC_TXC_1COL);
+	D32(EMAC_TXC_ABORT);
+	D32(EMAC_TXC_ALLFRM);
+	D32(EMAC_TXC_ALLOCT);
+	D32(EMAC_TXC_BROAD);
+	D32(EMAC_TXC_CRSERR);
+	D32(EMAC_TXC_DEFER);
+	D32(EMAC_TXC_DMAUND);
+	D32(EMAC_TXC_EQ64);
+	D32(EMAC_TXC_GE1024);
+	D32(EMAC_TXC_GT1COL);
+	D32(EMAC_TXC_LATECL);
+	D32(EMAC_TXC_LT1024);
+	D32(EMAC_TXC_LT128);
+	D32(EMAC_TXC_LT256);
+	D32(EMAC_TXC_LT512);
+	D32(EMAC_TXC_MACCTL);
+	D32(EMAC_TXC_MULTI);
+	D32(EMAC_TXC_OCTET);
+	D32(EMAC_TXC_OK);
+	D32(EMAC_TXC_UNICST);
+	D32(EMAC_TXC_XS_COL);
+	D32(EMAC_TXC_XS_DFR);
+	D32(EMAC_TX_IRQE);
+	D32(EMAC_TX_STAT);
+	D32(EMAC_TX_STKY);
+	D32(EMAC_VLAN1);
+	D32(EMAC_VLAN2);
+	D32(EMAC_WKUP_CTL);
+	D32(EMAC_WKUP_FFCMD);
+	D32(EMAC_WKUP_FFCRC0);
+	D32(EMAC_WKUP_FFCRC1);
+	D32(EMAC_WKUP_FFMSK0);
+	D32(EMAC_WKUP_FFMSK1);
+	D32(EMAC_WKUP_FFMSK2);
+	D32(EMAC_WKUP_FFMSK3);
+	D32(EMAC_WKUP_FFOFF);
+# ifdef EMAC_PTP_ACCR
+	D32(EMAC_PTP_ACCR);
+	D32(EMAC_PTP_ADDEND);
+	D32(EMAC_PTP_ALARMHI);
+	D32(EMAC_PTP_ALARMLO);
+	D16(EMAC_PTP_CTL);
+	D32(EMAC_PTP_FOFF);
+	D32(EMAC_PTP_FV1);
+	D32(EMAC_PTP_FV2);
+	D32(EMAC_PTP_FV3);
+	D16(EMAC_PTP_ID_OFF);
+	D32(EMAC_PTP_ID_SNAP);
+	D16(EMAC_PTP_IE);
+	D16(EMAC_PTP_ISTAT);
+	D32(EMAC_PTP_OFFSET);
+	D32(EMAC_PTP_PPS_PERIOD);
+	D32(EMAC_PTP_PPS_STARTHI);
+	D32(EMAC_PTP_PPS_STARTLO);
+	D32(EMAC_PTP_RXSNAPHI);
+	D32(EMAC_PTP_RXSNAPLO);
+	D32(EMAC_PTP_TIMEHI);
+	D32(EMAC_PTP_TIMELO);
+	D32(EMAC_PTP_TXSNAPHI);
+	D32(EMAC_PTP_TXSNAPLO);
+# endif
+#endif
+
+#if defined(EPPI0_STATUS) || defined(EPPI1_STATUS) || defined(EPPI2_STATUS)
+	parent = debugfs_create_dir("eppi", top);
+# ifdef EPPI0_STATUS
+	EPPI(0);
+# endif
+# ifdef EPPI1_STATUS
+	EPPI(1);
+# endif
+# ifdef EPPI2_STATUS
+	EPPI(2);
+# endif
+#endif
+
+	parent = debugfs_create_dir("gptimer", top);
+#ifdef TIMER_ENABLE
+	GPTIMER_GROUP(TIMER_ENABLE, -1);
+#endif
+#ifdef TIMER_ENABLE0
+	GPTIMER_GROUP(TIMER_ENABLE0, 0);
+#endif
+#ifdef TIMER_ENABLE1
+	GPTIMER_GROUP(TIMER_ENABLE1, 1);
+#endif
+	/* XXX: Should convert BF561 MMR names */
+#ifdef TMRS4_DISABLE
+	GPTIMER_GROUP(TMRS4_ENABLE, 0);
+	GPTIMER_GROUP(TMRS8_ENABLE, 1);
+#endif
+	GPTIMER(0);
+	GPTIMER(1);
+	GPTIMER(2);
+#ifdef TIMER3_CONFIG
+	GPTIMER(3);
+	GPTIMER(4);
+	GPTIMER(5);
+	GPTIMER(6);
+	GPTIMER(7);
+#endif
+#ifdef TIMER8_CONFIG
+	GPTIMER(8);
+	GPTIMER(9);
+	GPTIMER(10);
+#endif
+#ifdef TIMER11_CONFIG
+	GPTIMER(11);
+#endif
+
+#ifdef HMDMA0_CONTROL
+	parent = debugfs_create_dir("hmdma", top);
+	HMDMA(0);
+	HMDMA(1);
+#endif
+
+#ifdef HOST_CONTROL
+	parent = debugfs_create_dir("hostdp", top);
+	D16(HOST_CONTROL);
+	D16(HOST_STATUS);
+	D16(HOST_TIMEOUT);
+#endif
+
+#ifdef IMDMA_S0_CONFIG
+	parent = debugfs_create_dir("imdma", top);
+	IMDMA(0);
+	IMDMA(1);
+#endif
+
+#ifdef KPAD_CTL
+	parent = debugfs_create_dir("keypad", top);
+	D16(KPAD_CTL);
+	D16(KPAD_PRESCALE);
+	D16(KPAD_MSEL);
+	D16(KPAD_ROWCOL);
+	D16(KPAD_STAT);
+	D16(KPAD_SOFTEVAL);
+#endif
+
+	parent = debugfs_create_dir("mdma", top);
+	MDMA(0);
+	MDMA(1);
+#ifdef MDMA_D2_CONFIG
+	MDMA(2);
+	MDMA(3);
+#endif
+
+#ifdef MXVR_CONFIG
+	parent = debugfs_create_dir("mxvr", top);
+	D16(MXVR_CONFIG);
+# ifdef MXVR_PLL_CTL_0
+	D32(MXVR_PLL_CTL_0);
+# endif
+	D32(MXVR_STATE_0);
+	D32(MXVR_STATE_1);
+	D32(MXVR_INT_STAT_0);
+	D32(MXVR_INT_STAT_1);
+	D32(MXVR_INT_EN_0);
+	D32(MXVR_INT_EN_1);
+	D16(MXVR_POSITION);
+	D16(MXVR_MAX_POSITION);
+	D16(MXVR_DELAY);
+	D16(MXVR_MAX_DELAY);
+	D32(MXVR_LADDR);
+	D16(MXVR_GADDR);
+	D32(MXVR_AADDR);
+	D32(MXVR_ALLOC_0);
+	D32(MXVR_ALLOC_1);
+	D32(MXVR_ALLOC_2);
+	D32(MXVR_ALLOC_3);
+	D32(MXVR_ALLOC_4);
+	D32(MXVR_ALLOC_5);
+	D32(MXVR_ALLOC_6);
+	D32(MXVR_ALLOC_7);
+	D32(MXVR_ALLOC_8);
+	D32(MXVR_ALLOC_9);
+	D32(MXVR_ALLOC_10);
+	D32(MXVR_ALLOC_11);
+	D32(MXVR_ALLOC_12);
+	D32(MXVR_ALLOC_13);
+	D32(MXVR_ALLOC_14);
+	D32(MXVR_SYNC_LCHAN_0);
+	D32(MXVR_SYNC_LCHAN_1);
+	D32(MXVR_SYNC_LCHAN_2);
+	D32(MXVR_SYNC_LCHAN_3);
+	D32(MXVR_SYNC_LCHAN_4);
+	D32(MXVR_SYNC_LCHAN_5);
+	D32(MXVR_SYNC_LCHAN_6);
+	D32(MXVR_SYNC_LCHAN_7);
+	D32(MXVR_DMA0_CONFIG);
+	D32(MXVR_DMA0_START_ADDR);
+	D16(MXVR_DMA0_COUNT);
+	D32(MXVR_DMA0_CURR_ADDR);
+	D16(MXVR_DMA0_CURR_COUNT);
+	D32(MXVR_DMA1_CONFIG);
+	D32(MXVR_DMA1_START_ADDR);
+	D16(MXVR_DMA1_COUNT);
+	D32(MXVR_DMA1_CURR_ADDR);
+	D16(MXVR_DMA1_CURR_COUNT);
+	D32(MXVR_DMA2_CONFIG);
+	D32(MXVR_DMA2_START_ADDR);
+	D16(MXVR_DMA2_COUNT);
+	D32(MXVR_DMA2_CURR_ADDR);
+	D16(MXVR_DMA2_CURR_COUNT);
+	D32(MXVR_DMA3_CONFIG);
+	D32(MXVR_DMA3_START_ADDR);
+	D16(MXVR_DMA3_COUNT);
+	D32(MXVR_DMA3_CURR_ADDR);
+	D16(MXVR_DMA3_CURR_COUNT);
+	D32(MXVR_DMA4_CONFIG);
+	D32(MXVR_DMA4_START_ADDR);
+	D16(MXVR_DMA4_COUNT);
+	D32(MXVR_DMA4_CURR_ADDR);
+	D16(MXVR_DMA4_CURR_COUNT);
+	D32(MXVR_DMA5_CONFIG);
+	D32(MXVR_DMA5_START_ADDR);
+	D16(MXVR_DMA5_COUNT);
+	D32(MXVR_DMA5_CURR_ADDR);
+	D16(MXVR_DMA5_CURR_COUNT);
+	D32(MXVR_DMA6_CONFIG);
+	D32(MXVR_DMA6_START_ADDR);
+	D16(MXVR_DMA6_COUNT);
+	D32(MXVR_DMA6_CURR_ADDR);
+	D16(MXVR_DMA6_CURR_COUNT);
+	D32(MXVR_DMA7_CONFIG);
+	D32(MXVR_DMA7_START_ADDR);
+	D16(MXVR_DMA7_COUNT);
+	D32(MXVR_DMA7_CURR_ADDR);
+	D16(MXVR_DMA7_CURR_COUNT);
+	D16(MXVR_AP_CTL);
+	D32(MXVR_APRB_START_ADDR);
+	D32(MXVR_APRB_CURR_ADDR);
+	D32(MXVR_APTB_START_ADDR);
+	D32(MXVR_APTB_CURR_ADDR);
+	D32(MXVR_CM_CTL);
+	D32(MXVR_CMRB_START_ADDR);
+	D32(MXVR_CMRB_CURR_ADDR);
+	D32(MXVR_CMTB_START_ADDR);
+	D32(MXVR_CMTB_CURR_ADDR);
+	D32(MXVR_RRDB_START_ADDR);
+	D32(MXVR_RRDB_CURR_ADDR);
+	D32(MXVR_PAT_DATA_0);
+	D32(MXVR_PAT_EN_0);
+	D32(MXVR_PAT_DATA_1);
+	D32(MXVR_PAT_EN_1);
+	D16(MXVR_FRAME_CNT_0);
+	D16(MXVR_FRAME_CNT_1);
+	D32(MXVR_ROUTING_0);
+	D32(MXVR_ROUTING_1);
+	D32(MXVR_ROUTING_2);
+	D32(MXVR_ROUTING_3);
+	D32(MXVR_ROUTING_4);
+	D32(MXVR_ROUTING_5);
+	D32(MXVR_ROUTING_6);
+	D32(MXVR_ROUTING_7);
+	D32(MXVR_ROUTING_8);
+	D32(MXVR_ROUTING_9);
+	D32(MXVR_ROUTING_10);
+	D32(MXVR_ROUTING_11);
+	D32(MXVR_ROUTING_12);
+	D32(MXVR_ROUTING_13);
+	D32(MXVR_ROUTING_14);
+# ifdef MXVR_PLL_CTL_1
+	D32(MXVR_PLL_CTL_1);
+# endif
+	D16(MXVR_BLOCK_CNT);
+# ifdef MXVR_CLK_CTL
+	D32(MXVR_CLK_CTL);
+# endif
+# ifdef MXVR_CDRPLL_CTL
+	D32(MXVR_CDRPLL_CTL);
+# endif
+# ifdef MXVR_FMPLL_CTL
+	D32(MXVR_FMPLL_CTL);
+# endif
+# ifdef MXVR_PIN_CTL
+	D16(MXVR_PIN_CTL);
+# endif
+# ifdef MXVR_SCLK_CNT
+	D16(MXVR_SCLK_CNT);
+# endif
+#endif
+
+#ifdef NFC_ADDR
+	parent = debugfs_create_dir("nfc", top);
+	D_WO(NFC_ADDR, 16);
+	D_WO(NFC_CMD, 16);
+	D_RO(NFC_COUNT, 16);
+	D16(NFC_CTL);
+	D_WO(NFC_DATA_RD, 16);
+	D_WO(NFC_DATA_WR, 16);
+	D_RO(NFC_ECC0, 16);
+	D_RO(NFC_ECC1, 16);
+	D_RO(NFC_ECC2, 16);
+	D_RO(NFC_ECC3, 16);
+	D16(NFC_IRQMASK);
+	D16(NFC_IRQSTAT);
+	D_WO(NFC_PGCTL, 16);
+	D_RO(NFC_READ, 16);
+	D16(NFC_RST);
+	D_RO(NFC_STAT, 16);
+#endif
+
+#ifdef OTP_CONTROL
+	parent = debugfs_create_dir("otp", top);
+	D16(OTP_CONTROL);
+	D16(OTP_BEN);
+	D16(OTP_STATUS);
+	D32(OTP_TIMING);
+	D32(OTP_DATA0);
+	D32(OTP_DATA1);
+	D32(OTP_DATA2);
+	D32(OTP_DATA3);
+#endif
+
+#ifdef PINT0_MASK_SET
+	parent = debugfs_create_dir("pint", top);
+	PINT(0);
+	PINT(1);
+	PINT(2);
+	PINT(3);
+#endif
+
+#ifdef PIXC_CTL
+	parent = debugfs_create_dir("pixc", top);
+	D16(PIXC_CTL);
+	D16(PIXC_PPL);
+	D16(PIXC_LPF);
+	D16(PIXC_AHSTART);
+	D16(PIXC_AHEND);
+	D16(PIXC_AVSTART);
+	D16(PIXC_AVEND);
+	D16(PIXC_ATRANSP);
+	D16(PIXC_BHSTART);
+	D16(PIXC_BHEND);
+	D16(PIXC_BVSTART);
+	D16(PIXC_BVEND);
+	D16(PIXC_BTRANSP);
+	D16(PIXC_INTRSTAT);
+	D32(PIXC_RYCON);
+	D32(PIXC_GUCON);
+	D32(PIXC_BVCON);
+	D32(PIXC_CCBIAS);
+	D32(PIXC_TC);
+#endif
+
+	parent = debugfs_create_dir("pll", top);
+	D16(PLL_CTL);
+	D16(PLL_DIV);
+	D16(PLL_LOCKCNT);
+	D16(PLL_STAT);
+	D16(VR_CTL);
+	D32(CHIPID);	/* it's part of this hardware block */
+
+#if defined(PPI_CONTROL) || defined(PPI0_CONTROL) || defined(PPI1_CONTROL)
+	parent = debugfs_create_dir("ppi", top);
+# ifdef PPI_CONTROL
+	bfin_debug_mmrs_ppi(parent, PPI_CONTROL, -1);
+# endif
+# ifdef PPI0_CONTROL
+	PPI(0);
+# endif
+# ifdef PPI1_CONTROL
+	PPI(1);
+# endif
+#endif
+
+#ifdef PWM_CTRL
+	parent = debugfs_create_dir("pwm", top);
+	D16(PWM_CTRL);
+	D16(PWM_STAT);
+	D16(PWM_TM);
+	D16(PWM_DT);
+	D16(PWM_GATE);
+	D16(PWM_CHA);
+	D16(PWM_CHB);
+	D16(PWM_CHC);
+	D16(PWM_SEG);
+	D16(PWM_SYNCWT);
+	D16(PWM_CHAL);
+	D16(PWM_CHBL);
+	D16(PWM_CHCL);
+	D16(PWM_LSI);
+	D16(PWM_STAT2);
+#endif
+
+#ifdef RSI_CONFIG
+	parent = debugfs_create_dir("rsi", top);
+	D32(RSI_ARGUMENT);
+	D16(RSI_CEATA_CONTROL);
+	D16(RSI_CLK_CONTROL);
+	D16(RSI_COMMAND);
+	D16(RSI_CONFIG);
+	D16(RSI_DATA_CNT);
+	D16(RSI_DATA_CONTROL);
+	D16(RSI_DATA_LGTH);
+	D32(RSI_DATA_TIMER);
+	D16(RSI_EMASK);
+	D16(RSI_ESTAT);
+	D32(RSI_FIFO);
+	D16(RSI_FIFO_CNT);
+	D32(RSI_MASK0);
+	D32(RSI_MASK1);
+	D16(RSI_PID0);
+	D16(RSI_PID1);
+	D16(RSI_PID2);
+	D16(RSI_PID3);
+	D16(RSI_PID4);
+	D16(RSI_PID5);
+	D16(RSI_PID6);
+	D16(RSI_PID7);
+	D16(RSI_PWR_CONTROL);
+	D16(RSI_RD_WAIT_EN);
+	D32(RSI_RESPONSE0);
+	D32(RSI_RESPONSE1);
+	D32(RSI_RESPONSE2);
+	D32(RSI_RESPONSE3);
+	D16(RSI_RESP_CMD);
+	D32(RSI_STATUS);
+	D_WO(RSI_STATUSCL, 16);
+#endif
+
+#ifdef RTC_ALARM
+	parent = debugfs_create_dir("rtc", top);
+	D32(RTC_ALARM);
+	D16(RTC_ICTL);
+	D16(RTC_ISTAT);
+	D16(RTC_PREN);
+	D32(RTC_STAT);
+	D16(RTC_SWCNT);
+#endif
+
+#ifdef SDH_CFG
+	parent = debugfs_create_dir("sdh", top);
+	D32(SDH_ARGUMENT);
+	D16(SDH_CFG);
+	D16(SDH_CLK_CTL);
+	D16(SDH_COMMAND);
+	D_RO(SDH_DATA_CNT, 16);
+	D16(SDH_DATA_CTL);
+	D16(SDH_DATA_LGTH);
+	D32(SDH_DATA_TIMER);
+	D16(SDH_E_MASK);
+	D16(SDH_E_STATUS);
+	D32(SDH_FIFO);
+	D_RO(SDH_FIFO_CNT, 16);
+	D32(SDH_MASK0);
+	D32(SDH_MASK1);
+	D_RO(SDH_PID0, 16);
+	D_RO(SDH_PID1, 16);
+	D_RO(SDH_PID2, 16);
+	D_RO(SDH_PID3, 16);
+	D_RO(SDH_PID4, 16);
+	D_RO(SDH_PID5, 16);
+	D_RO(SDH_PID6, 16);
+	D_RO(SDH_PID7, 16);
+	D16(SDH_PWR_CTL);
+	D16(SDH_RD_WAIT_EN);
+	D_RO(SDH_RESPONSE0, 32);
+	D_RO(SDH_RESPONSE1, 32);
+	D_RO(SDH_RESPONSE2, 32);
+	D_RO(SDH_RESPONSE3, 32);
+	D_RO(SDH_RESP_CMD, 16);
+	D_RO(SDH_STATUS, 32);
+	D_WO(SDH_STATUS_CLR, 16);
+#endif
+
+#ifdef SECURE_CONTROL
+	parent = debugfs_create_dir("security", top);
+	D16(SECURE_CONTROL);
+	D16(SECURE_STATUS);
+	D32(SECURE_SYSSWT);
+#endif
+
+	parent = debugfs_create_dir("sic", top);
+	D16(SWRST);
+	D16(SYSCR);
+	D16(SIC_RVECT);
+	D32(SIC_IAR0);
+	D32(SIC_IAR1);
+	D32(SIC_IAR2);
+#ifdef SIC_IAR3
+	D32(SIC_IAR3);
+#endif
+#ifdef SIC_IAR4
+	D32(SIC_IAR4);
+	D32(SIC_IAR5);
+	D32(SIC_IAR6);
+#endif
+#ifdef SIC_IAR7
+	D32(SIC_IAR7);
+#endif
+#ifdef SIC_IAR8
+	D32(SIC_IAR8);
+	D32(SIC_IAR9);
+	D32(SIC_IAR10);
+	D32(SIC_IAR11);
+#endif
+#ifdef SIC_IMASK
+	D32(SIC_IMASK);
+	D32(SIC_ISR);
+	D32(SIC_IWR);
+#endif
+#ifdef SIC_IMASK0
+	D32(SIC_IMASK0);
+	D32(SIC_IMASK1);
+	D32(SIC_ISR0);
+	D32(SIC_ISR1);
+	D32(SIC_IWR0);
+	D32(SIC_IWR1);
+#endif
+#ifdef SIC_IMASK2
+	D32(SIC_IMASK2);
+	D32(SIC_ISR2);
+	D32(SIC_IWR2);
+#endif
+#ifdef SICB_RVECT
+	D16(SICB_SWRST);
+	D16(SICB_SYSCR);
+	D16(SICB_RVECT);
+	D32(SICB_IAR0);
+	D32(SICB_IAR1);
+	D32(SICB_IAR2);
+	D32(SICB_IAR3);
+	D32(SICB_IAR4);
+	D32(SICB_IAR5);
+	D32(SICB_IAR6);
+	D32(SICB_IAR7);
+	D32(SICB_IMASK0);
+	D32(SICB_IMASK1);
+	D32(SICB_ISR0);
+	D32(SICB_ISR1);
+	D32(SICB_IWR0);
+	D32(SICB_IWR1);
+#endif
+
+	parent = debugfs_create_dir("spi", top);
+#ifdef SPI0_REGBASE
+	SPI(0);
+#endif
+#ifdef SPI1_REGBASE
+	SPI(1);
+#endif
+#ifdef SPI2_REGBASE
+	SPI(2);
+#endif
+
+	parent = debugfs_create_dir("sport", top);
+#ifdef SPORT0_STAT
+	SPORT(0);
+#endif
+#ifdef SPORT1_STAT
+	SPORT(1);
+#endif
+#ifdef SPORT2_STAT
+	SPORT(2);
+#endif
+#ifdef SPORT3_STAT
+	SPORT(3);
+#endif
+
+#if defined(TWI_CLKDIV) || defined(TWI0_CLKDIV) || defined(TWI1_CLKDIV)
+	parent = debugfs_create_dir("twi", top);
+# ifdef TWI_CLKDIV
+	bfin_debug_mmrs_twi(parent, TWI_CLKDIV, -1);
+# endif
+# ifdef TWI0_CLKDIV
+	TWI(0);
+# endif
+# ifdef TWI1_CLKDIV
+	TWI(1);
+# endif
+#endif
+
+	parent = debugfs_create_dir("uart", top);
+#ifdef BFIN_UART_DLL
+	bfin_debug_mmrs_uart(parent, BFIN_UART_DLL, -1);
+#endif
+#ifdef UART0_DLL
+	UART(0);
+#endif
+#ifdef UART1_DLL
+	UART(1);
+#endif
+#ifdef UART2_DLL
+	UART(2);
+#endif
+#ifdef UART3_DLL
+	UART(3);
+#endif
+
+#ifdef USB_FADDR
+	parent = debugfs_create_dir("usb", top);
+	D16(USB_FADDR);
+	D16(USB_POWER);
+	D16(USB_INTRTX);
+	D16(USB_INTRRX);
+	D16(USB_INTRTXE);
+	D16(USB_INTRRXE);
+	D16(USB_INTRUSB);
+	D16(USB_INTRUSBE);
+	D16(USB_FRAME);
+	D16(USB_INDEX);
+	D16(USB_TESTMODE);
+	D16(USB_GLOBINTR);
+	D16(USB_GLOBAL_CTL);
+	D16(USB_TX_MAX_PACKET);
+	D16(USB_CSR0);
+	D16(USB_TXCSR);
+	D16(USB_RX_MAX_PACKET);
+	D16(USB_RXCSR);
+	D16(USB_COUNT0);
+	D16(USB_RXCOUNT);
+	D16(USB_TXTYPE);
+	D16(USB_NAKLIMIT0);
+	D16(USB_TXINTERVAL);
+	D16(USB_RXTYPE);
+	D16(USB_RXINTERVAL);
+	D16(USB_TXCOUNT);
+	D16(USB_EP0_FIFO);
+	D16(USB_EP1_FIFO);
+	D16(USB_EP2_FIFO);
+	D16(USB_EP3_FIFO);
+	D16(USB_EP4_FIFO);
+	D16(USB_EP5_FIFO);
+	D16(USB_EP6_FIFO);
+	D16(USB_EP7_FIFO);
+	D16(USB_OTG_DEV_CTL);
+	D16(USB_OTG_VBUS_IRQ);
+	D16(USB_OTG_VBUS_MASK);
+	D16(USB_LINKINFO);
+	D16(USB_VPLEN);
+	D16(USB_HS_EOF1);
+	D16(USB_FS_EOF1);
+	D16(USB_LS_EOF1);
+	D16(USB_APHY_CNTRL);
+	D16(USB_APHY_CALIB);
+	D16(USB_APHY_CNTRL2);
+	D16(USB_PLLOSC_CTRL);
+	D16(USB_SRP_CLKDIV);
+	D16(USB_EP_NI0_TXMAXP);
+	D16(USB_EP_NI0_TXCSR);
+	D16(USB_EP_NI0_RXMAXP);
+	D16(USB_EP_NI0_RXCSR);
+	D16(USB_EP_NI0_RXCOUNT);
+	D16(USB_EP_NI0_TXTYPE);
+	D16(USB_EP_NI0_TXINTERVAL);
+	D16(USB_EP_NI0_RXTYPE);
+	D16(USB_EP_NI0_RXINTERVAL);
+	D16(USB_EP_NI0_TXCOUNT);
+	D16(USB_EP_NI1_TXMAXP);
+	D16(USB_EP_NI1_TXCSR);
+	D16(USB_EP_NI1_RXMAXP);
+	D16(USB_EP_NI1_RXCSR);
+	D16(USB_EP_NI1_RXCOUNT);
+	D16(USB_EP_NI1_TXTYPE);
+	D16(USB_EP_NI1_TXINTERVAL);
+	D16(USB_EP_NI1_RXTYPE);
+	D16(USB_EP_NI1_RXINTERVAL);
+	D16(USB_EP_NI1_TXCOUNT);
+	D16(USB_EP_NI2_TXMAXP);
+	D16(USB_EP_NI2_TXCSR);
+	D16(USB_EP_NI2_RXMAXP);
+	D16(USB_EP_NI2_RXCSR);
+	D16(USB_EP_NI2_RXCOUNT);
+	D16(USB_EP_NI2_TXTYPE);
+	D16(USB_EP_NI2_TXINTERVAL);
+	D16(USB_EP_NI2_RXTYPE);
+	D16(USB_EP_NI2_RXINTERVAL);
+	D16(USB_EP_NI2_TXCOUNT);
+	D16(USB_EP_NI3_TXMAXP);
+	D16(USB_EP_NI3_TXCSR);
+	D16(USB_EP_NI3_RXMAXP);
+	D16(USB_EP_NI3_RXCSR);
+	D16(USB_EP_NI3_RXCOUNT);
+	D16(USB_EP_NI3_TXTYPE);
+	D16(USB_EP_NI3_TXINTERVAL);
+	D16(USB_EP_NI3_RXTYPE);
+	D16(USB_EP_NI3_RXINTERVAL);
+	D16(USB_EP_NI3_TXCOUNT);
+	D16(USB_EP_NI4_TXMAXP);
+	D16(USB_EP_NI4_TXCSR);
+	D16(USB_EP_NI4_RXMAXP);
+	D16(USB_EP_NI4_RXCSR);
+	D16(USB_EP_NI4_RXCOUNT);
+	D16(USB_EP_NI4_TXTYPE);
+	D16(USB_EP_NI4_TXINTERVAL);
+	D16(USB_EP_NI4_RXTYPE);
+	D16(USB_EP_NI4_RXINTERVAL);
+	D16(USB_EP_NI4_TXCOUNT);
+	D16(USB_EP_NI5_TXMAXP);
+	D16(USB_EP_NI5_TXCSR);
+	D16(USB_EP_NI5_RXMAXP);
+	D16(USB_EP_NI5_RXCSR);
+	D16(USB_EP_NI5_RXCOUNT);
+	D16(USB_EP_NI5_TXTYPE);
+	D16(USB_EP_NI5_TXINTERVAL);
+	D16(USB_EP_NI5_RXTYPE);
+	D16(USB_EP_NI5_RXINTERVAL);
+	D16(USB_EP_NI5_TXCOUNT);
+	D16(USB_EP_NI6_TXMAXP);
+	D16(USB_EP_NI6_TXCSR);
+	D16(USB_EP_NI6_RXMAXP);
+	D16(USB_EP_NI6_RXCSR);
+	D16(USB_EP_NI6_RXCOUNT);
+	D16(USB_EP_NI6_TXTYPE);
+	D16(USB_EP_NI6_TXINTERVAL);
+	D16(USB_EP_NI6_RXTYPE);
+	D16(USB_EP_NI6_RXINTERVAL);
+	D16(USB_EP_NI6_TXCOUNT);
+	D16(USB_EP_NI7_TXMAXP);
+	D16(USB_EP_NI7_TXCSR);
+	D16(USB_EP_NI7_RXMAXP);
+	D16(USB_EP_NI7_RXCSR);
+	D16(USB_EP_NI7_RXCOUNT);
+	D16(USB_EP_NI7_TXTYPE);
+	D16(USB_EP_NI7_TXINTERVAL);
+	D16(USB_EP_NI7_RXTYPE);
+	D16(USB_EP_NI7_RXINTERVAL);
+	D16(USB_EP_NI7_TXCOUNT);
+	D16(USB_DMA_INTERRUPT);
+	D16(USB_DMA0CONTROL);
+	D16(USB_DMA0ADDRLOW);
+	D16(USB_DMA0ADDRHIGH);
+	D16(USB_DMA0COUNTLOW);
+	D16(USB_DMA0COUNTHIGH);
+	D16(USB_DMA1CONTROL);
+	D16(USB_DMA1ADDRLOW);
+	D16(USB_DMA1ADDRHIGH);
+	D16(USB_DMA1COUNTLOW);
+	D16(USB_DMA1COUNTHIGH);
+	D16(USB_DMA2CONTROL);
+	D16(USB_DMA2ADDRLOW);
+	D16(USB_DMA2ADDRHIGH);
+	D16(USB_DMA2COUNTLOW);
+	D16(USB_DMA2COUNTHIGH);
+	D16(USB_DMA3CONTROL);
+	D16(USB_DMA3ADDRLOW);
+	D16(USB_DMA3ADDRHIGH);
+	D16(USB_DMA3COUNTLOW);
+	D16(USB_DMA3COUNTHIGH);
+	D16(USB_DMA4CONTROL);
+	D16(USB_DMA4ADDRLOW);
+	D16(USB_DMA4ADDRHIGH);
+	D16(USB_DMA4COUNTLOW);
+	D16(USB_DMA4COUNTHIGH);
+	D16(USB_DMA5CONTROL);
+	D16(USB_DMA5ADDRLOW);
+	D16(USB_DMA5ADDRHIGH);
+	D16(USB_DMA5COUNTLOW);
+	D16(USB_DMA5COUNTHIGH);
+	D16(USB_DMA6CONTROL);
+	D16(USB_DMA6ADDRLOW);
+	D16(USB_DMA6ADDRHIGH);
+	D16(USB_DMA6COUNTLOW);
+	D16(USB_DMA6COUNTHIGH);
+	D16(USB_DMA7CONTROL);
+	D16(USB_DMA7ADDRLOW);
+	D16(USB_DMA7ADDRHIGH);
+	D16(USB_DMA7COUNTLOW);
+	D16(USB_DMA7COUNTHIGH);
+#endif
+
+#ifdef WDOG_CNT
+	parent = debugfs_create_dir("watchdog", top);
+	D32(WDOG_CNT);
+	D16(WDOG_CTL);
+	D32(WDOG_STAT);
+#endif
+#ifdef WDOGA_CNT
+	parent = debugfs_create_dir("watchdog", top);
+	D32(WDOGA_CNT);
+	D16(WDOGA_CTL);
+	D32(WDOGA_STAT);
+	D32(WDOGB_CNT);
+	D16(WDOGB_CTL);
+	D32(WDOGB_STAT);
+#endif
+
+	/* BF533 glue */
+#ifdef FIO_FLAG_D
+#define PORTFIO FIO_FLAG_D
+#endif
+	/* BF561 glue */
+#ifdef FIO0_FLAG_D
+#define PORTFIO FIO0_FLAG_D
+#endif
+#ifdef FIO1_FLAG_D
+#define PORTGIO FIO1_FLAG_D
+#endif
+#ifdef FIO2_FLAG_D
+#define PORTHIO FIO2_FLAG_D
+#endif
+	parent = debugfs_create_dir("port", top);
+#ifdef PORTFIO
+	PORT(PORTFIO, 'F');
+#endif
+#ifdef PORTGIO
+	PORT(PORTGIO, 'G');
+#endif
+#ifdef PORTHIO
+	PORT(PORTHIO, 'H');
+#endif
+
+#ifdef __ADSPBF51x__
+	D16(PORTF_FER);
+	D16(PORTF_DRIVE);
+	D16(PORTF_HYSTERESIS);
+	D16(PORTF_MUX);
+
+	D16(PORTG_FER);
+	D16(PORTG_DRIVE);
+	D16(PORTG_HYSTERESIS);
+	D16(PORTG_MUX);
+
+	D16(PORTH_FER);
+	D16(PORTH_DRIVE);
+	D16(PORTH_HYSTERESIS);
+	D16(PORTH_MUX);
+
+	D16(MISCPORT_DRIVE);
+	D16(MISCPORT_HYSTERESIS);
+#endif	/* BF51x */
+
+#ifdef __ADSPBF52x__
+	D16(PORTF_FER);
+	D16(PORTF_DRIVE);
+	D16(PORTF_HYSTERESIS);
+	D16(PORTF_MUX);
+	D16(PORTF_SLEW);
+
+	D16(PORTG_FER);
+	D16(PORTG_DRIVE);
+	D16(PORTG_HYSTERESIS);
+	D16(PORTG_MUX);
+	D16(PORTG_SLEW);
+
+	D16(PORTH_FER);
+	D16(PORTH_DRIVE);
+	D16(PORTH_HYSTERESIS);
+	D16(PORTH_MUX);
+	D16(PORTH_SLEW);
+
+	D16(MISCPORT_DRIVE);
+	D16(MISCPORT_HYSTERESIS);
+	D16(MISCPORT_SLEW);
+#endif	/* BF52x */
+
+#ifdef BF537_FAMILY
+	D16(PORTF_FER);
+	D16(PORTG_FER);
+	D16(PORTH_FER);
+	D16(PORT_MUX);
+#endif	/* BF534 BF536 BF537 */
+
+#ifdef BF538_FAMILY
+	D16(PORTCIO_FER);
+	D16(PORTCIO);
+	D16(PORTCIO_CLEAR);
+	D16(PORTCIO_SET);
+	D16(PORTCIO_TOGGLE);
+	D16(PORTCIO_DIR);
+	D16(PORTCIO_INEN);
+
+	D16(PORTDIO);
+	D16(PORTDIO_CLEAR);
+	D16(PORTDIO_DIR);
+	D16(PORTDIO_FER);
+	D16(PORTDIO_INEN);
+	D16(PORTDIO_SET);
+	D16(PORTDIO_TOGGLE);
+
+	D16(PORTEIO);
+	D16(PORTEIO_CLEAR);
+	D16(PORTEIO_DIR);
+	D16(PORTEIO_FER);
+	D16(PORTEIO_INEN);
+	D16(PORTEIO_SET);
+	D16(PORTEIO_TOGGLE);
+#endif	/* BF538 BF539 */
+
+#ifdef __ADSPBF54x__
+	{
+		int num;
+		unsigned long base;
+
+		base = PORTA_FER;
+		for (num = 0; num < 10; ++num) {
+			PORT(base, num);
+			base += sizeof(struct bfin_gpio_regs);
+		}
+
+	}
+#endif	/* BF54x */
+#endif /* CONFIG_BF60x */
+	debug_mmrs_dentry = top;
+
+	return 0;
+}
+module_init(bfin_debug_mmrs_init);
+
+static void __exit bfin_debug_mmrs_exit(void)
+{
+	debugfs_remove_recursive(debug_mmrs_dentry);
+}
+module_exit(bfin_debug_mmrs_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/dma-mapping.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/dma-mapping.c
new file mode 100644
index 0000000..477bb29
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/dma-mapping.c
@@ -0,0 +1,172 @@
+/*
+ * Dynamic DMA mapping support
+ *
+ * Copyright 2005-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/types.h>
+#include <linux/gfp.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/export.h>
+#include <linux/bitmap.h>
+
+static spinlock_t dma_page_lock;
+static unsigned long *dma_page;
+static unsigned int dma_pages;
+static unsigned long dma_base;
+static unsigned long dma_size;
+static unsigned int dma_initialized;
+
+static void dma_alloc_init(unsigned long start, unsigned long end)
+{
+	spin_lock_init(&dma_page_lock);
+	dma_initialized = 0;
+
+	dma_page = (unsigned long *)__get_free_page(GFP_KERNEL);
+	memset(dma_page, 0, PAGE_SIZE);
+	dma_base = PAGE_ALIGN(start);
+	dma_size = PAGE_ALIGN(end) - PAGE_ALIGN(start);
+	dma_pages = dma_size >> PAGE_SHIFT;
+	memset((void *)dma_base, 0, DMA_UNCACHED_REGION);
+	dma_initialized = 1;
+
+	printk(KERN_INFO "%s: dma_page @ 0x%p - %d pages at 0x%08lx\n", __func__,
+	       dma_page, dma_pages, dma_base);
+}
+
+static inline unsigned int get_pages(size_t size)
+{
+	return ((size - 1) >> PAGE_SHIFT) + 1;
+}
+
+static unsigned long __alloc_dma_pages(unsigned int pages)
+{
+	unsigned long ret = 0, flags;
+	unsigned long start;
+
+	if (dma_initialized == 0)
+		dma_alloc_init(_ramend - DMA_UNCACHED_REGION, _ramend);
+
+	spin_lock_irqsave(&dma_page_lock, flags);
+
+	start = bitmap_find_next_zero_area(dma_page, dma_pages, 0, pages, 0);
+	if (start < dma_pages) {
+		ret = dma_base + (start << PAGE_SHIFT);
+		bitmap_set(dma_page, start, pages);
+	}
+	spin_unlock_irqrestore(&dma_page_lock, flags);
+	return ret;
+}
+
+static void __free_dma_pages(unsigned long addr, unsigned int pages)
+{
+	unsigned long page = (addr - dma_base) >> PAGE_SHIFT;
+	unsigned long flags;
+
+	if ((page + pages) > dma_pages) {
+		printk(KERN_ERR "%s: freeing outside range.\n", __func__);
+		BUG();
+	}
+
+	spin_lock_irqsave(&dma_page_lock, flags);
+	bitmap_clear(dma_page, page, pages);
+	spin_unlock_irqrestore(&dma_page_lock, flags);
+}
+
+static void *bfin_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
+{
+	void *ret;
+
+	ret = (void *)__alloc_dma_pages(get_pages(size));
+
+	if (ret) {
+		memset(ret, 0, size);
+		*dma_handle = virt_to_phys(ret);
+	}
+
+	return ret;
+}
+
+static void bfin_dma_free(struct device *dev, size_t size, void *vaddr,
+		  dma_addr_t dma_handle, unsigned long attrs)
+{
+	__free_dma_pages((unsigned long)vaddr, get_pages(size));
+}
+
+/*
+ * Streaming DMA mappings
+ */
+void __dma_sync(dma_addr_t addr, size_t size,
+		enum dma_data_direction dir)
+{
+	__dma_sync_inline(addr, size, dir);
+}
+EXPORT_SYMBOL(__dma_sync);
+
+static int bfin_dma_map_sg(struct device *dev, struct scatterlist *sg_list,
+		int nents, enum dma_data_direction direction,
+		unsigned long attrs)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sg_list, sg, nents, i) {
+		sg->dma_address = (dma_addr_t) sg_virt(sg);
+
+		if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+			continue;
+
+		__dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction);
+	}
+
+	return nents;
+}
+
+static void bfin_dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sg_list, int nelems,
+		enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sg_list, sg, nelems, i) {
+		sg->dma_address = (dma_addr_t) sg_virt(sg);
+		__dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction);
+	}
+}
+
+static dma_addr_t bfin_dma_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size, enum dma_data_direction dir,
+		unsigned long attrs)
+{
+	dma_addr_t handle = (dma_addr_t)(page_address(page) + offset);
+
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		_dma_sync(handle, size, dir);
+
+	return handle;
+}
+
+static inline void bfin_dma_sync_single_for_device(struct device *dev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	_dma_sync(handle, size, dir);
+}
+
+const struct dma_map_ops bfin_dma_ops = {
+	.alloc			= bfin_dma_alloc,
+	.free			= bfin_dma_free,
+
+	.map_page		= bfin_dma_map_page,
+	.map_sg			= bfin_dma_map_sg,
+
+	.sync_single_for_device	= bfin_dma_sync_single_for_device,
+	.sync_sg_for_device	= bfin_dma_sync_sg_for_device,
+};
+EXPORT_SYMBOL(bfin_dma_ops);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/dumpstack.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/dumpstack.c
new file mode 100644
index 0000000..3c992c1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/dumpstack.c
@@ -0,0 +1,177 @@
+/* Provide basic stack dumping functions
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/kernel.h>
+#include <linux/thread_info.h>
+#include <linux/mm.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/sched/debug.h>
+
+#include <asm/trace.h>
+
+/*
+ * Checks to see if the address pointed to is either a
+ * 16-bit CALL instruction, or a 32-bit CALL instruction
+ */
+static bool is_bfin_call(unsigned short *addr)
+{
+	unsigned int opcode;
+
+	if (!get_instruction(&opcode, addr))
+		return false;
+
+	if ((opcode >= 0x0060 && opcode <= 0x0067) ||
+	    (opcode >= 0x0070 && opcode <= 0x0077) ||
+	    (opcode >= 0xE3000000 && opcode <= 0xE3FFFFFF))
+		return true;
+
+	return false;
+
+}
+
+void show_stack(struct task_struct *task, unsigned long *stack)
+{
+#ifdef CONFIG_PRINTK
+	unsigned int *addr, *endstack, *fp = 0, *frame;
+	unsigned short *ins_addr;
+	char buf[150];
+	unsigned int i, j, ret_addr, frame_no = 0;
+
+	/*
+	 * If we have been passed a specific stack, use that one otherwise
+	 *    if we have been passed a task structure, use that, otherwise
+	 *    use the stack of where the variable "stack" exists
+	 */
+
+	if (stack == NULL) {
+		if (task) {
+			/* We know this is a kernel stack, so this is the start/end */
+			stack = (unsigned long *)task->thread.ksp;
+			endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
+		} else {
+			/* print out the existing stack info */
+			stack = (unsigned long *)&stack;
+			endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+		}
+	} else
+		endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+
+	printk(KERN_NOTICE "Stack info:\n");
+	decode_address(buf, (unsigned int)stack);
+	printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
+
+	if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) {
+		printk(KERN_NOTICE "Invalid stack pointer\n");
+		return;
+	}
+
+	/* First thing is to look for a frame pointer */
+	for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
+		if (*addr & 0x1)
+			continue;
+		ins_addr = (unsigned short *)*addr;
+		ins_addr--;
+		if (is_bfin_call(ins_addr))
+			fp = addr - 1;
+
+		if (fp) {
+			/* Let's check to see if it is a frame pointer */
+			while (fp >= (addr - 1) && fp < endstack
+			       && fp && ((unsigned int) fp & 0x3) == 0)
+				fp = (unsigned int *)*fp;
+			if (fp == 0 || fp == endstack) {
+				fp = addr - 1;
+				break;
+			}
+			fp = 0;
+		}
+	}
+	if (fp) {
+		frame = fp;
+		printk(KERN_NOTICE " FP: (0x%p)\n", fp);
+	} else
+		frame = 0;
+
+	/*
+	 * Now that we think we know where things are, we
+	 * walk the stack again, this time printing things out
+	 * incase there is no frame pointer, we still look for
+	 * valid return addresses
+	 */
+
+	/* First time print out data, next time, print out symbols */
+	for (j = 0; j <= 1; j++) {
+		if (j)
+			printk(KERN_NOTICE "Return addresses in stack:\n");
+		else
+			printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);
+
+		fp = frame;
+		frame_no = 0;
+
+		for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
+		     addr < endstack; addr++, i++) {
+
+			ret_addr = 0;
+			if (!j && i % 8 == 0)
+				printk(KERN_NOTICE "%p:", addr);
+
+			/* if it is an odd address, or zero, just skip it */
+			if (*addr & 0x1 || !*addr)
+				goto print;
+
+			ins_addr = (unsigned short *)*addr;
+
+			/* Go back one instruction, and see if it is a CALL */
+			ins_addr--;
+			ret_addr = is_bfin_call(ins_addr);
+ print:
+			if (!j && stack == (unsigned long *)addr)
+				printk("[%08x]", *addr);
+			else if (ret_addr)
+				if (j) {
+					decode_address(buf, (unsigned int)*addr);
+					if (frame == addr) {
+						printk(KERN_NOTICE "   frame %2i : %s\n", frame_no, buf);
+						continue;
+					}
+					printk(KERN_NOTICE "    address : %s\n", buf);
+				} else
+					printk("<%08x>", *addr);
+			else if (fp == addr) {
+				if (j)
+					frame = addr+1;
+				else
+					printk("(%08x)", *addr);
+
+				fp = (unsigned int *)*addr;
+				frame_no++;
+
+			} else if (!j)
+				printk(" %08x ", *addr);
+		}
+		if (!j)
+			printk("\n");
+	}
+#endif
+}
+EXPORT_SYMBOL(show_stack);
+
+void dump_stack(void)
+{
+	unsigned long stack;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+	int tflags;
+#endif
+	trace_buffer_save(tflags);
+	dump_bfin_trace_buffer();
+	dump_stack_print_info(KERN_DEFAULT);
+	show_stack(current, &stack);
+	trace_buffer_restore(tflags);
+}
+EXPORT_SYMBOL(dump_stack);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/early_printk.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/early_printk.c
new file mode 100644
index 0000000..4b89af9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/early_printk.c
@@ -0,0 +1,271 @@
+/*
+ * allow a console to be used for early printk
+ * derived from arch/x86/kernel/early_printk.c
+ *
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched/debug.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/console.h>
+#include <linux/string.h>
+#include <linux/reboot.h>
+#include <asm/blackfin.h>
+#include <asm/irq_handler.h>
+#include <asm/early_printk.h>
+
+#ifdef CONFIG_SERIAL_BFIN
+extern struct console *bfin_earlyserial_init(unsigned int port,
+						unsigned int cflag);
+#endif
+#ifdef CONFIG_BFIN_JTAG_COMM
+extern struct console *bfin_jc_early_init(void);
+#endif
+
+/* Default console */
+#define DEFAULT_PORT 0
+#define DEFAULT_CFLAG CS8|B57600
+
+/* Default console for early crashes */
+#define DEFAULT_EARLY_PORT "serial,uart0,57600"
+
+#ifdef CONFIG_SERIAL_CORE
+/* What should get here is "0,57600" */
+static struct console * __init earlyserial_init(char *buf)
+{
+	int baud, bit;
+	char parity;
+	unsigned int serial_port = DEFAULT_PORT;
+	unsigned int cflag = DEFAULT_CFLAG;
+
+	serial_port = simple_strtoul(buf, &buf, 10);
+	buf++;
+
+	cflag = 0;
+	baud = simple_strtoul(buf, &buf, 10);
+	switch (baud) {
+	case 1200:
+		cflag |= B1200;
+		break;
+	case 2400:
+		cflag |= B2400;
+		break;
+	case 4800:
+		cflag |= B4800;
+		break;
+	case 9600:
+		cflag |= B9600;
+		break;
+	case 19200:
+		cflag |= B19200;
+		break;
+	case 38400:
+		cflag |= B38400;
+		break;
+	case 115200:
+		cflag |= B115200;
+		break;
+	default:
+		cflag |= B57600;
+	}
+
+	parity = buf[0];
+	buf++;
+	switch (parity) {
+	case 'e':
+		cflag |= PARENB;
+		break;
+	case 'o':
+		cflag |= PARODD;
+		break;
+	}
+
+	bit = simple_strtoul(buf, &buf, 10);
+	switch (bit) {
+	case 5:
+		cflag |= CS5;
+		break;
+	case 6:
+		cflag |= CS6;
+		break;
+	case 7:
+		cflag |= CS7;
+		break;
+	default:
+		cflag |= CS8;
+	}
+
+#ifdef CONFIG_SERIAL_BFIN
+	return bfin_earlyserial_init(serial_port, cflag);
+#else
+	return NULL;
+#endif
+
+}
+#endif
+
+int __init setup_early_printk(char *buf)
+{
+
+	/* Crashing in here would be really bad, so check both the var
+	   and the pointer before we start using it
+	 */
+	if (!buf)
+		return 0;
+
+	if (!*buf)
+		return 0;
+
+	if (early_console != NULL)
+		return 0;
+
+#ifdef CONFIG_SERIAL_BFIN
+	/* Check for Blackfin Serial */
+	if (!strncmp(buf, "serial,uart", 11)) {
+		buf += 11;
+		early_console = earlyserial_init(buf);
+	}
+#endif
+
+#ifdef CONFIG_BFIN_JTAG_COMM
+	/* Check for Blackfin JTAG */
+	if (!strncmp(buf, "jtag", 4)) {
+		buf += 4;
+		early_console = bfin_jc_early_init();
+	}
+#endif
+
+#ifdef CONFIG_FB
+		/* TODO: add framebuffer console support */
+#endif
+
+	if (likely(early_console)) {
+		early_console->flags |= CON_BOOT;
+
+		register_console(early_console);
+		printk(KERN_INFO "early printk enabled on %s%d\n",
+			early_console->name,
+			early_console->index);
+	}
+
+	return 0;
+}
+
+/*
+ * Set up a temporary Event Vector Table, so if something bad happens before
+ * the kernel is fully started, it doesn't vector off into somewhere we don't
+ * know
+ */
+
+asmlinkage void __init init_early_exception_vectors(void)
+{
+	u32 evt;
+	SSYNC();
+
+	/*
+	 * This starts up the shadow buffer, incase anything crashes before
+	 * setup arch
+	 */
+	mark_shadow_error();
+	early_shadow_puts(linux_banner);
+	early_shadow_stamp();
+
+	if (CPUID != bfin_cpuid()) {
+		early_shadow_puts("Running on wrong machine type, expected");
+		early_shadow_reg(CPUID, 16);
+		early_shadow_puts(", but running on");
+		early_shadow_reg(bfin_cpuid(), 16);
+		early_shadow_puts("\n");
+	}
+
+	/* cannot program in software:
+	 * evt0 - emulation (jtag)
+	 * evt1 - reset
+	 */
+	for (evt = EVT2; evt <= EVT15; evt += 4)
+		bfin_write32(evt, early_trap);
+	CSYNC();
+
+	/* Set all the return from interrupt, exception, NMI to a known place
+	 * so if we do a RETI, RETX or RETN by mistake - we go somewhere known
+	 * Note - don't change RETS - we are in a subroutine, or
+	 * RETE - since it might screw up if emulator is attached
+	 */
+	asm("\tRETI = %0; RETX = %0; RETN = %0;\n"
+		: : "p"(early_trap));
+
+}
+
+__attribute__((__noreturn__))
+asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr)
+{
+	/* This can happen before the uart is initialized, so initialize
+	 * the UART now (but only if we are running on the processor we think
+	 * we are compiled for - otherwise we write to MMRs that don't exist,
+	 * and cause other problems. Nothing comes out the UART, but it does
+	 * end up in the __buf_log.
+	 */
+	if (likely(early_console == NULL) && CPUID == bfin_cpuid())
+		setup_early_printk(DEFAULT_EARLY_PORT);
+
+	if (!shadow_console_enabled()) {
+		/* crap - we crashed before setup_arch() */
+		early_shadow_puts("panic before setup_arch\n");
+		early_shadow_puts("IPEND:");
+		early_shadow_reg(fp->ipend, 16);
+		if (fp->seqstat & SEQSTAT_EXCAUSE) {
+			early_shadow_puts("\nEXCAUSE:");
+			early_shadow_reg(fp->seqstat & SEQSTAT_EXCAUSE, 8);
+		}
+		if (fp->seqstat & SEQSTAT_HWERRCAUSE) {
+			early_shadow_puts("\nHWERRCAUSE:");
+			early_shadow_reg(
+				(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14, 8);
+		}
+		early_shadow_puts("\nErr @");
+		if (fp->ipend & EVT_EVX)
+			early_shadow_reg(fp->retx, 32);
+		else
+			early_shadow_reg(fp->pc, 32);
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+		early_shadow_puts("\nTrace:");
+		if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
+			while (bfin_read_TBUFSTAT() & TBUFCNT) {
+				early_shadow_puts("\nT  :");
+				early_shadow_reg(bfin_read_TBUF(), 32);
+				early_shadow_puts("\n S :");
+				early_shadow_reg(bfin_read_TBUF(), 32);
+			}
+		}
+#endif
+		early_shadow_puts("\nUse bfin-elf-addr2line to determine "
+			"function names\n");
+		/*
+		 * We should panic(), but we can't - since panic calls printk,
+		 * and printk uses memcpy.
+		 * we want to reboot, but if the machine type is different,
+		 * can't due to machine specific reboot sequences
+		 */
+		if (CPUID == bfin_cpuid()) {
+			early_shadow_puts("Trying to restart\n");
+			machine_restart("");
+		}
+
+		early_shadow_puts("Halting, since it is not safe to restart\n");
+		while (1)
+			asm volatile ("EMUEXCPT; IDLE;\n");
+
+	} else {
+		printk(KERN_EMERG "Early panic\n");
+		show_regs(fp);
+		dump_bfin_trace_buffer();
+	}
+
+	panic("Died early");
+}
+
+early_param("earlyprintk", setup_early_printk);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/entry.S b/src/kernel/linux/v4.14/arch/blackfin/kernel/entry.S
new file mode 100644
index 0000000..4071265
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/entry.S
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/blackfin.h>
+#include <asm/asm-offsets.h>
+
+#include <asm/context.S>
+
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+.section .l1.text
+#else
+.text
+#endif
+
+ENTRY(_ret_from_fork)
+#ifdef CONFIG_IPIPE
+	/*
+	 * Hw IRQs are off on entry, and we don't want the scheduling tail
+	 * code to starve high priority domains from interrupts while it
+	 * runs. Therefore we first stall the root stage to have the
+	 * virtual interrupt state reflect IMASK.
+	 */
+	p0.l = ___ipipe_root_status;
+	p0.h = ___ipipe_root_status;
+	r4 = [p0];
+	bitset(r4, 0);
+	[p0] = r4;
+	/*
+	 * Then we may enable hw IRQs, allowing preemption from high
+	 * priority domains. schedule_tail() will do local_irq_enable()
+	 * since Blackfin does not define __ARCH_WANT_UNLOCKED_CTXSW, so
+	 * there is no need to unstall the root domain by ourselves
+	 * afterwards.
+	 */
+	p0.l = _bfin_irq_flags;
+	p0.h = _bfin_irq_flags;
+	r4 = [p0];
+	sti r4;
+#endif /* CONFIG_IPIPE */
+	SP += -12;
+	pseudo_long_call _schedule_tail, p5;
+	SP += 12;
+	p1 = [sp++];
+	r0 = [sp++];
+	cc = p1 == 0;
+	if cc jump .Lfork;
+	sp += -12;
+	call (p1);
+	sp += 12;
+.Lfork:
+	RESTORE_CONTEXT
+	rti;
+ENDPROC(_ret_from_fork)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/exception.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/exception.c
new file mode 100644
index 0000000..9208b5f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/exception.c
@@ -0,0 +1,45 @@
+/* Basic functions for adding/removing custom exception handlers
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/module.h>
+#include <asm/irq_handler.h>
+
+int bfin_request_exception(unsigned int exception, void (*handler)(void))
+{
+	void (*curr_handler)(void);
+
+	if (exception > 0x3F)
+		return -EINVAL;
+
+	curr_handler = ex_table[exception];
+
+	if (curr_handler != ex_replaceable)
+		return -EBUSY;
+
+	ex_table[exception] = handler;
+
+	return 0;
+}
+EXPORT_SYMBOL(bfin_request_exception);
+
+int bfin_free_exception(unsigned int exception, void (*handler)(void))
+{
+	void (*curr_handler)(void);
+
+	if (exception > 0x3F)
+		return -EINVAL;
+
+	curr_handler = ex_table[exception];
+
+	if (curr_handler != handler)
+		return -EBUSY;
+
+	ex_table[exception] = ex_replaceable;
+
+	return 0;
+}
+EXPORT_SYMBOL(bfin_free_exception);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/fixed_code.S b/src/kernel/linux/v4.14/arch/blackfin/kernel/fixed_code.S
new file mode 100644
index 0000000..0565917
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/fixed_code.S
@@ -0,0 +1,155 @@
+/*
+ * This file contains sequences of code that will be copied to a
+ * fixed location, defined in <asm/fixed_code.h>.  The interrupt
+ * handlers ensure that these sequences appear to be atomic when
+ * executed from userspace.
+ * These are aligned to 16 bytes, so that we have some space to replace
+ * these sequences with something else (e.g. kernel traps if we ever do
+ * BF561 SMP).
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <linux/unistd.h>
+#include <asm/entry.h>
+
+__INIT
+
+ENTRY(_fixed_code_start)
+
+.align 16
+ENTRY(_sigreturn_stub)
+	P0 = __NR_rt_sigreturn;
+	EXCPT 0;
+	/* Speculative execution paranoia.  */
+0:	JUMP.S 0b;
+ENDPROC (_sigreturn_stub)
+
+.align 16
+	/*
+	 * Atomic swap, 8 bit.
+	 * Inputs:	P0: memory address to use
+	 *		R1: value to store
+	 * Output:	R0: old contents of the memory address, zero extended.
+	 */
+ENTRY(_atomic_xchg32)
+	R0 = [P0];
+	[P0] = R1;
+	rts;
+ENDPROC (_atomic_xchg32)
+
+.align 16
+	/*
+	 * Compare and swap, 32 bit.
+	 * Inputs:	P0: memory address to use
+	 *		R1: compare value
+	 *		R2: new value to store
+	 * The new value is stored if the contents of the memory
+	 * address is equal to the compare value.
+	 * Output:	R0: old contents of the memory address.
+	 */
+ENTRY(_atomic_cas32)
+	R0 = [P0];
+	CC = R0 == R1;
+	IF !CC JUMP 1f;
+	[P0] = R2;
+1:
+	rts;
+ENDPROC (_atomic_cas32)
+
+.align 16
+	/*
+	 * Atomic add, 32 bit.
+	 * Inputs:	P0: memory address to use
+	 *		R0: value to add
+	 * Outputs:	R0: new contents of the memory address.
+	 *		R1: previous contents of the memory address.
+	 */
+ENTRY(_atomic_add32)
+	R1 = [P0];
+	R0 = R1 + R0;
+	[P0] = R0;
+	rts;
+ENDPROC (_atomic_add32)
+
+.align 16
+	/*
+	 * Atomic sub, 32 bit.
+	 * Inputs:	P0: memory address to use
+	 *		R0: value to subtract
+	 * Outputs:	R0: new contents of the memory address.
+	 *		R1: previous contents of the memory address.
+	 */
+ENTRY(_atomic_sub32)
+	R1 = [P0];
+	R0 = R1 - R0;
+	[P0] = R0;
+	rts;
+ENDPROC (_atomic_sub32)
+
+.align 16
+	/*
+	 * Atomic ior, 32 bit.
+	 * Inputs:	P0: memory address to use
+	 *		R0: value to ior
+	 * Outputs:	R0: new contents of the memory address.
+	 *		R1: previous contents of the memory address.
+	 */
+ENTRY(_atomic_ior32)
+	R1 = [P0];
+	R0 = R1 | R0;
+	[P0] = R0;
+	rts;
+ENDPROC (_atomic_ior32)
+
+.align 16
+	/*
+	 * Atomic and, 32 bit.
+	 * Inputs:	P0: memory address to use
+	 *		R0: value to and
+	 * Outputs:	R0: new contents of the memory address.
+	 *		R1: previous contents of the memory address.
+	 */
+ENTRY(_atomic_and32)
+	R1 = [P0];
+	R0 = R1 & R0;
+	[P0] = R0;
+	rts;
+ENDPROC (_atomic_and32)
+
+.align 16
+	/*
+	 * Atomic xor, 32 bit.
+	 * Inputs:	P0: memory address to use
+	 *		R0: value to xor
+	 * Outputs:	R0: new contents of the memory address.
+	 *		R1: previous contents of the memory address.
+	 */
+ENTRY(_atomic_xor32)
+	R1 = [P0];
+	R0 = R1 ^ R0;
+	[P0] = R0;
+	rts;
+ENDPROC (_atomic_xor32)
+
+.align 16
+	/*
+	 * safe_user_instruction
+	 * Four NOPS are enough to allow the pipeline to speculativily load
+	 * execute anything it wants. After that, things have gone bad, and
+	 * we are stuck - so panic. Since we might be in user space, we can't
+	 * call panic, so just cause a unhandled exception, this should cause
+	 * a dump of the trace buffer so we can tell were we are, and a reboot
+	 */
+ENTRY(_safe_user_instruction)
+	NOP; NOP; NOP; NOP;
+	EXCPT 0x4;
+ENDPROC(_safe_user_instruction)
+
+ENTRY(_fixed_code_end)
+
+__FINIT
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/flat.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/flat.c
new file mode 100644
index 0000000..8ebc54d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/flat.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/mm_types.h>
+#include <linux/flat.h>
+
+#define FLAT_BFIN_RELOC_TYPE_16_BIT 0
+#define FLAT_BFIN_RELOC_TYPE_16H_BIT 1
+#define FLAT_BFIN_RELOC_TYPE_32_BIT 2
+
+unsigned long bfin_get_addr_from_rp(u32 *ptr,
+		u32 relval,
+		u32 flags,
+		u32 *persistent)
+{
+	unsigned short *usptr = (unsigned short *)ptr;
+	int type = (relval >> 26) & 7;
+	u32 val;
+
+	switch (type) {
+	case FLAT_BFIN_RELOC_TYPE_16_BIT:
+	case FLAT_BFIN_RELOC_TYPE_16H_BIT:
+		usptr = (unsigned short *)ptr;
+		pr_debug("*usptr = %x", get_unaligned(usptr));
+		val = get_unaligned(usptr);
+		val += *persistent;
+		break;
+
+	case FLAT_BFIN_RELOC_TYPE_32_BIT:
+		pr_debug("*ptr = %x", get_unaligned(ptr));
+		val = get_unaligned(ptr);
+		break;
+
+	default:
+		pr_debug("BINFMT_FLAT: Unknown relocation type %x\n", type);
+		return 0;
+	}
+
+	/*
+	 * Stack-relative relocs contain the offset into the stack, we
+	 * have to add the stack's start address here and return 1 from
+	 * flat_addr_absolute to prevent the normal address calculations
+	 */
+	if (relval & (1 << 29))
+		return val + current->mm->context.end_brk;
+
+	if ((flags & FLAT_FLAG_GOTPIC) == 0)
+		val = htonl(val);
+	return val;
+}
+EXPORT_SYMBOL(bfin_get_addr_from_rp);
+
+/*
+ * Insert the address ADDR into the symbol reference at RP;
+ * RELVAL is the raw relocation-table entry from which RP is derived
+ */
+void bfin_put_addr_at_rp(u32 *ptr, u32 addr, u32 relval)
+{
+	unsigned short *usptr = (unsigned short *)ptr;
+	int type = (relval >> 26) & 7;
+
+	switch (type) {
+	case FLAT_BFIN_RELOC_TYPE_16_BIT:
+		put_unaligned(addr, usptr);
+		pr_debug("new value %x at %p", get_unaligned(usptr), usptr);
+		break;
+
+	case FLAT_BFIN_RELOC_TYPE_16H_BIT:
+		put_unaligned(addr >> 16, usptr);
+		pr_debug("new value %x", get_unaligned(usptr));
+		break;
+
+	case FLAT_BFIN_RELOC_TYPE_32_BIT:
+		put_unaligned(addr, ptr);
+		pr_debug("new ptr =%x", get_unaligned(ptr));
+		break;
+	}
+}
+EXPORT_SYMBOL(bfin_put_addr_at_rp);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/ftrace-entry.S b/src/kernel/linux/v4.14/arch/blackfin/kernel/ftrace-entry.S
new file mode 100644
index 0000000..3b8bdcb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/ftrace-entry.S
@@ -0,0 +1,207 @@
+/*
+ * mcount and friends -- ftrace stuff
+ *
+ * Copyright (C) 2009-2010 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <asm/ftrace.h>
+
+.text
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+/* Simple stub so we can boot the kernel until runtime patching has
+ * disabled all calls to this.  Then it'll be unused.
+ */
+ENTRY(__mcount)
+# if ANOMALY_05000371
+	nop; nop; nop; nop;
+# endif
+	rts;
+ENDPROC(__mcount)
+
+/* GCC will have called us before setting up the function prologue, so we
+ * can clobber the normal scratch registers, but we need to make sure to
+ * save/restore the registers used for argument passing (R0-R2) in case
+ * the profiled function is using them.  With data registers, R3 is the
+ * only one we can blow away.  With pointer registers, we have P0-P2.
+ *
+ * Upon entry, the RETS will point to the top of the current profiled
+ * function.  And since GCC pushed the previous RETS for us, the previous
+ * function will be waiting there.  mmmm pie.
+ */
+ENTRY(_ftrace_caller)
+	/* save first/second/third function arg and the return register */
+	[--sp] = r2;
+	[--sp] = r0;
+	[--sp] = r1;
+	[--sp] = rets;
+
+	/* function_trace_call(unsigned long ip, unsigned long parent_ip):
+	 *  ip: this point was called by ...
+	 *  parent_ip: ... this function
+	 * the ip itself will need adjusting for the mcount call
+	 */
+	r0 = rets;
+	r1 = [sp + 16];	/* skip the 4 local regs on stack */
+	r0 += -MCOUNT_INSN_SIZE;
+
+.globl _ftrace_call
+_ftrace_call:
+	call _ftrace_stub
+
+# ifdef CONFIG_FUNCTION_GRAPH_TRACER
+.globl _ftrace_graph_call
+_ftrace_graph_call:
+	nop;	/* jump _ftrace_graph_caller; */
+# endif
+
+	/* restore state and get out of dodge */
+.Lfinish_trace:
+	rets = [sp++];
+	r1 = [sp++];
+	r0 = [sp++];
+	r2 = [sp++];
+
+.globl _ftrace_stub
+_ftrace_stub:
+	rts;
+ENDPROC(_ftrace_caller)
+
+#else
+
+/* See documentation for _ftrace_caller */
+ENTRY(__mcount)
+	/* save third function arg early so we can do testing below */
+	[--sp] = r2;
+
+	/* load the function pointer to the tracer */
+	p0.l = _ftrace_trace_function;
+	p0.h = _ftrace_trace_function;
+	r3 = [p0];
+
+	/* optional micro optimization: don't call the stub tracer */
+	r2.l = _ftrace_stub;
+	r2.h = _ftrace_stub;
+	cc = r2 == r3;
+	if ! cc jump .Ldo_trace;
+
+# ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/* if the ftrace_graph_return function pointer is not set to
+	 * the ftrace_stub entry, call prepare_ftrace_return().
+	 */
+	p0.l = _ftrace_graph_return;
+	p0.h = _ftrace_graph_return;
+	r3 = [p0];
+	cc = r2 == r3;
+	if ! cc jump _ftrace_graph_caller;
+
+	/* similarly, if the ftrace_graph_entry function pointer is not
+	 * set to the ftrace_graph_entry_stub entry, ...
+	 */
+	p0.l = _ftrace_graph_entry;
+	p0.h = _ftrace_graph_entry;
+	r2.l = _ftrace_graph_entry_stub;
+	r2.h = _ftrace_graph_entry_stub;
+	r3 = [p0];
+	cc = r2 == r3;
+	if ! cc jump _ftrace_graph_caller;
+# endif
+
+	r2 = [sp++];
+	rts;
+
+.Ldo_trace:
+
+	/* save first/second function arg and the return register */
+	[--sp] = r0;
+	[--sp] = r1;
+	[--sp] = rets;
+
+	/* setup the tracer function */
+	p0 = r3;
+
+	/* function_trace_call(unsigned long ip, unsigned long parent_ip):
+	 *  ip: this point was called by ...
+	 *  parent_ip: ... this function
+	 * the ip itself will need adjusting for the mcount call
+	 */
+	r0 = rets;
+	r1 = [sp + 16];	/* skip the 4 local regs on stack */
+	r0 += -MCOUNT_INSN_SIZE;
+
+	/* call the tracer */
+	call (p0);
+
+	/* restore state and get out of dodge */
+.Lfinish_trace:
+	rets = [sp++];
+	r1 = [sp++];
+	r0 = [sp++];
+	r2 = [sp++];
+
+.globl _ftrace_stub
+_ftrace_stub:
+	rts;
+ENDPROC(__mcount)
+
+#endif
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+/* The prepare_ftrace_return() function is similar to the trace function
+ * except it takes a pointer to the location of the frompc.  This is so
+ * the prepare_ftrace_return() can hijack it temporarily for probing
+ * purposes.
+ */
+ENTRY(_ftrace_graph_caller)
+# ifndef CONFIG_DYNAMIC_FTRACE
+	/* save first/second function arg and the return register */
+	[--sp] = r0;
+	[--sp] = r1;
+	[--sp] = rets;
+
+	/* prepare_ftrace_return(parent, self_addr, frame_pointer) */
+	r0 = sp;	/* unsigned long *parent */
+	r1 = rets;	/* unsigned long self_addr */
+# else
+	r0 = sp;	/* unsigned long *parent */
+	r1 = [sp];	/* unsigned long self_addr */
+# endif
+# ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	r2 = fp;	/* unsigned long frame_pointer */
+# endif
+	r0 += 16;	/* skip the 4 local regs on stack */
+	r1 += -MCOUNT_INSN_SIZE;
+	call _prepare_ftrace_return;
+
+	jump .Lfinish_trace;
+ENDPROC(_ftrace_graph_caller)
+
+/* Undo the rewrite caused by ftrace_graph_caller().  The common function
+ * ftrace_return_to_handler() will return the original rets so we can
+ * restore it and be on our way.
+ */
+ENTRY(_return_to_handler)
+	/* make sure original return values are saved */
+	[--sp] = p0;
+	[--sp] = r0;
+	[--sp] = r1;
+
+	/* get original return address */
+# ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	r0 = fp;	/* Blackfin is sane, so omit this */
+# endif
+	call _ftrace_return_to_handler;
+	rets = r0;
+
+	/* anomaly 05000371 - make sure we have at least three instructions
+	 * between rets setting and the return
+	 */
+	r1 = [sp++];
+	r0 = [sp++];
+	p0 = [sp++];
+	rts;
+ENDPROC(_return_to_handler)
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/ftrace.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/ftrace.c
new file mode 100644
index 0000000..8dad758
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/ftrace.c
@@ -0,0 +1,125 @@
+/*
+ * ftrace graph code
+ *
+ * Copyright (C) 2009-2010 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/ftrace.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include <linux/atomic.h>
+#include <asm/cacheflush.h>
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+static const unsigned char mnop[] = {
+	0x03, 0xc0, 0x00, 0x18, /* MNOP; */
+	0x03, 0xc0, 0x00, 0x18, /* MNOP; */
+};
+
+static void bfin_make_pcrel24(unsigned char *insn, unsigned long src,
+                              unsigned long dst)
+{
+	uint32_t pcrel = (dst - src) >> 1;
+	insn[0] = pcrel >> 16;
+	insn[1] = 0xe3;
+	insn[2] = pcrel;
+	insn[3] = pcrel >> 8;
+}
+#define bfin_make_pcrel24(insn, src, dst) bfin_make_pcrel24(insn, src, (unsigned long)(dst))
+
+static int ftrace_modify_code(unsigned long ip, const unsigned char *code,
+                              unsigned long len)
+{
+	int ret = probe_kernel_write((void *)ip, (void *)code, len);
+	flush_icache_range(ip, ip + len);
+	return ret;
+}
+
+int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
+                    unsigned long addr)
+{
+	/* Turn the mcount call site into two MNOPs as those are 32bit insns */
+	return ftrace_modify_code(rec->ip, mnop, sizeof(mnop));
+}
+
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	/* Restore the mcount call site */
+	unsigned char call[8];
+	call[0] = 0x67; /* [--SP] = RETS; */
+	call[1] = 0x01;
+	bfin_make_pcrel24(&call[2], rec->ip + 2, addr);
+	call[6] = 0x27; /* RETS = [SP++]; */
+	call[7] = 0x01;
+	return ftrace_modify_code(rec->ip, call, sizeof(call));
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	unsigned char call[4];
+	unsigned long ip = (unsigned long)&ftrace_call;
+	bfin_make_pcrel24(call, ip, func);
+	return ftrace_modify_code(ip, call, sizeof(call));
+}
+
+int __init ftrace_dyn_arch_init(void)
+{
+	return 0;
+}
+
+#endif
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+# ifdef CONFIG_DYNAMIC_FTRACE
+
+extern void ftrace_graph_call(void);
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	unsigned long ip = (unsigned long)&ftrace_graph_call;
+	uint16_t jump_pcrel12 = ((unsigned long)&ftrace_graph_caller - ip) >> 1;
+	jump_pcrel12 |= 0x2000;
+	return ftrace_modify_code(ip, (void *)&jump_pcrel12, sizeof(jump_pcrel12));
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	return ftrace_modify_code((unsigned long)&ftrace_graph_call, empty_zero_page, 2);
+}
+
+# endif
+
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in current thread info.
+ */
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
+                           unsigned long frame_pointer)
+{
+	struct ftrace_graph_ent trace;
+	unsigned long return_hooker = (unsigned long)&return_to_handler;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	if (ftrace_push_return_trace(*parent, self_addr, &trace.depth,
+				     frame_pointer, NULL) == -EBUSY)
+		return;
+
+	trace.func = self_addr;
+
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		return;
+	}
+
+	/* all is well in the world !  hijack RETS ... */
+	*parent = return_hooker;
+}
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/gptimers.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/gptimers.c
new file mode 100644
index 0000000..d776773
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/gptimers.c
@@ -0,0 +1,383 @@
+/*
+ * gptimers.c - Blackfin General Purpose Timer core API
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ * Copyright (C) 2005 John DeHority
+ * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de)
+ *
+ * Licensed under the GPLv2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include <asm/blackfin.h>
+#include <asm/gptimers.h>
+
+#ifdef DEBUG
+# define tassert(expr)
+#else
+# define tassert(expr) \
+	if (!(expr)) \
+		printk(KERN_DEBUG "%s:%s:%i: Assertion failed: " #expr "\n", __FILE__, __func__, __LINE__);
+#endif
+
+#ifndef CONFIG_BF60x
+# define BFIN_TIMER_NUM_GROUP  (BFIN_TIMER_OCTET(MAX_BLACKFIN_GPTIMERS - 1) + 1)
+#else
+# define BFIN_TIMER_NUM_GROUP  1
+#endif
+
+static struct bfin_gptimer_regs * const timer_regs[MAX_BLACKFIN_GPTIMERS] =
+{
+	(void *)TIMER0_CONFIG,
+	(void *)TIMER1_CONFIG,
+	(void *)TIMER2_CONFIG,
+#if (MAX_BLACKFIN_GPTIMERS > 3)
+	(void *)TIMER3_CONFIG,
+	(void *)TIMER4_CONFIG,
+	(void *)TIMER5_CONFIG,
+	(void *)TIMER6_CONFIG,
+	(void *)TIMER7_CONFIG,
+# if (MAX_BLACKFIN_GPTIMERS > 8)
+	(void *)TIMER8_CONFIG,
+	(void *)TIMER9_CONFIG,
+	(void *)TIMER10_CONFIG,
+#  if (MAX_BLACKFIN_GPTIMERS > 11)
+	(void *)TIMER11_CONFIG,
+#  endif
+# endif
+#endif
+};
+
+static struct bfin_gptimer_group_regs * const group_regs[BFIN_TIMER_NUM_GROUP] =
+{
+	(void *)TIMER0_GROUP_REG,
+#if (MAX_BLACKFIN_GPTIMERS > 8)
+	(void *)TIMER8_GROUP_REG,
+#endif
+};
+
+static uint32_t const trun_mask[MAX_BLACKFIN_GPTIMERS] =
+{
+	TIMER_STATUS_TRUN0,
+	TIMER_STATUS_TRUN1,
+	TIMER_STATUS_TRUN2,
+#if (MAX_BLACKFIN_GPTIMERS > 3)
+	TIMER_STATUS_TRUN3,
+	TIMER_STATUS_TRUN4,
+	TIMER_STATUS_TRUN5,
+	TIMER_STATUS_TRUN6,
+	TIMER_STATUS_TRUN7,
+# if (MAX_BLACKFIN_GPTIMERS > 8)
+	TIMER_STATUS_TRUN8,
+	TIMER_STATUS_TRUN9,
+	TIMER_STATUS_TRUN10,
+#  if (MAX_BLACKFIN_GPTIMERS > 11)
+	TIMER_STATUS_TRUN11,
+#  endif
+# endif
+#endif
+};
+
+static uint32_t const tovf_mask[MAX_BLACKFIN_GPTIMERS] =
+{
+	TIMER_STATUS_TOVF0,
+	TIMER_STATUS_TOVF1,
+	TIMER_STATUS_TOVF2,
+#if (MAX_BLACKFIN_GPTIMERS > 3)
+	TIMER_STATUS_TOVF3,
+	TIMER_STATUS_TOVF4,
+	TIMER_STATUS_TOVF5,
+	TIMER_STATUS_TOVF6,
+	TIMER_STATUS_TOVF7,
+# if (MAX_BLACKFIN_GPTIMERS > 8)
+	TIMER_STATUS_TOVF8,
+	TIMER_STATUS_TOVF9,
+	TIMER_STATUS_TOVF10,
+#  if (MAX_BLACKFIN_GPTIMERS > 11)
+	TIMER_STATUS_TOVF11,
+#  endif
+# endif
+#endif
+};
+
+static uint32_t const timil_mask[MAX_BLACKFIN_GPTIMERS] =
+{
+	TIMER_STATUS_TIMIL0,
+	TIMER_STATUS_TIMIL1,
+	TIMER_STATUS_TIMIL2,
+#if (MAX_BLACKFIN_GPTIMERS > 3)
+	TIMER_STATUS_TIMIL3,
+	TIMER_STATUS_TIMIL4,
+	TIMER_STATUS_TIMIL5,
+	TIMER_STATUS_TIMIL6,
+	TIMER_STATUS_TIMIL7,
+# if (MAX_BLACKFIN_GPTIMERS > 8)
+	TIMER_STATUS_TIMIL8,
+	TIMER_STATUS_TIMIL9,
+	TIMER_STATUS_TIMIL10,
+#  if (MAX_BLACKFIN_GPTIMERS > 11)
+	TIMER_STATUS_TIMIL11,
+#  endif
+# endif
+#endif
+};
+
+void set_gptimer_pwidth(unsigned int timer_id, uint32_t value)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	bfin_write(&timer_regs[timer_id]->width, value);
+	SSYNC();
+}
+EXPORT_SYMBOL(set_gptimer_pwidth);
+
+uint32_t get_gptimer_pwidth(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	return bfin_read(&timer_regs[timer_id]->width);
+}
+EXPORT_SYMBOL(get_gptimer_pwidth);
+
+void set_gptimer_period(unsigned int timer_id, uint32_t period)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	bfin_write(&timer_regs[timer_id]->period, period);
+	SSYNC();
+}
+EXPORT_SYMBOL(set_gptimer_period);
+
+uint32_t get_gptimer_period(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	return bfin_read(&timer_regs[timer_id]->period);
+}
+EXPORT_SYMBOL(get_gptimer_period);
+
+uint32_t get_gptimer_count(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	return bfin_read(&timer_regs[timer_id]->counter);
+}
+EXPORT_SYMBOL(get_gptimer_count);
+
+#ifdef CONFIG_BF60x
+void set_gptimer_delay(unsigned int timer_id, uint32_t delay)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	bfin_write(&timer_regs[timer_id]->delay, delay);
+	SSYNC();
+}
+EXPORT_SYMBOL(set_gptimer_delay);
+
+uint32_t get_gptimer_delay(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	return bfin_read(&timer_regs[timer_id]->delay);
+}
+EXPORT_SYMBOL(get_gptimer_delay);
+#endif
+
+#ifdef CONFIG_BF60x
+int get_gptimer_intr(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	return !!(bfin_read(&group_regs[BFIN_TIMER_OCTET(timer_id)]->data_ilat) & timil_mask[timer_id]);
+}
+EXPORT_SYMBOL(get_gptimer_intr);
+
+void clear_gptimer_intr(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	bfin_write(&group_regs[BFIN_TIMER_OCTET(timer_id)]->data_ilat, timil_mask[timer_id]);
+}
+EXPORT_SYMBOL(clear_gptimer_intr);
+
+int get_gptimer_over(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	return !!(bfin_read(&group_regs[BFIN_TIMER_OCTET(timer_id)]->stat_ilat) & tovf_mask[timer_id]);
+}
+EXPORT_SYMBOL(get_gptimer_over);
+
+void clear_gptimer_over(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	bfin_write(&group_regs[BFIN_TIMER_OCTET(timer_id)]->stat_ilat, tovf_mask[timer_id]);
+}
+EXPORT_SYMBOL(clear_gptimer_over);
+
+int get_gptimer_run(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	return !!(bfin_read(&group_regs[BFIN_TIMER_OCTET(timer_id)]->run) & trun_mask[timer_id]);
+}
+EXPORT_SYMBOL(get_gptimer_run);
+
+uint32_t get_gptimer_status(unsigned int group)
+{
+	tassert(group < BFIN_TIMER_NUM_GROUP);
+	return bfin_read(&group_regs[group]->data_ilat);
+}
+EXPORT_SYMBOL(get_gptimer_status);
+
+void set_gptimer_status(unsigned int group, uint32_t value)
+{
+	tassert(group < BFIN_TIMER_NUM_GROUP);
+	bfin_write(&group_regs[group]->data_ilat, value);
+	SSYNC();
+}
+EXPORT_SYMBOL(set_gptimer_status);
+#else
+uint32_t get_gptimer_status(unsigned int group)
+{
+	tassert(group < BFIN_TIMER_NUM_GROUP);
+	return bfin_read(&group_regs[group]->status);
+}
+EXPORT_SYMBOL(get_gptimer_status);
+
+void set_gptimer_status(unsigned int group, uint32_t value)
+{
+	tassert(group < BFIN_TIMER_NUM_GROUP);
+	bfin_write(&group_regs[group]->status, value);
+	SSYNC();
+}
+EXPORT_SYMBOL(set_gptimer_status);
+
+static uint32_t read_gptimer_status(unsigned int timer_id)
+{
+	return bfin_read(&group_regs[BFIN_TIMER_OCTET(timer_id)]->status);
+}
+
+int get_gptimer_intr(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	return !!(read_gptimer_status(timer_id) & timil_mask[timer_id]);
+}
+EXPORT_SYMBOL(get_gptimer_intr);
+
+void clear_gptimer_intr(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	bfin_write(&group_regs[BFIN_TIMER_OCTET(timer_id)]->status, timil_mask[timer_id]);
+}
+EXPORT_SYMBOL(clear_gptimer_intr);
+
+int get_gptimer_over(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	return !!(read_gptimer_status(timer_id) & tovf_mask[timer_id]);
+}
+EXPORT_SYMBOL(get_gptimer_over);
+
+void clear_gptimer_over(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	bfin_write(&group_regs[BFIN_TIMER_OCTET(timer_id)]->status, tovf_mask[timer_id]);
+}
+EXPORT_SYMBOL(clear_gptimer_over);
+
+int get_gptimer_run(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	return !!(read_gptimer_status(timer_id) & trun_mask[timer_id]);
+}
+EXPORT_SYMBOL(get_gptimer_run);
+#endif
+
+void set_gptimer_config(unsigned int timer_id, uint16_t config)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	bfin_write(&timer_regs[timer_id]->config, config);
+	SSYNC();
+}
+EXPORT_SYMBOL(set_gptimer_config);
+
+uint16_t get_gptimer_config(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	return bfin_read(&timer_regs[timer_id]->config);
+}
+EXPORT_SYMBOL(get_gptimer_config);
+
+void enable_gptimers(uint16_t mask)
+{
+	int i;
+#ifdef CONFIG_BF60x
+	uint16_t imask;
+	imask = bfin_read16(TIMER_DATA_IMSK);
+	imask &= ~mask;
+	bfin_write16(TIMER_DATA_IMSK, imask);
+#endif
+	tassert((mask & ~BLACKFIN_GPTIMER_IDMASK) == 0);
+	for (i = 0; i < BFIN_TIMER_NUM_GROUP; ++i) {
+		bfin_write(&group_regs[i]->enable, mask & 0xFF);
+		mask >>= 8;
+	}
+	SSYNC();
+}
+EXPORT_SYMBOL(enable_gptimers);
+
+static void _disable_gptimers(uint16_t mask)
+{
+	int i;
+	uint16_t m = mask;
+	tassert((mask & ~BLACKFIN_GPTIMER_IDMASK) == 0);
+	for (i = 0; i < BFIN_TIMER_NUM_GROUP; ++i) {
+		bfin_write(&group_regs[i]->disable, m & 0xFF);
+		m >>= 8;
+	}
+}
+
+void disable_gptimers(uint16_t mask)
+{
+#ifndef CONFIG_BF60x
+	int i;
+	_disable_gptimers(mask);
+	for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i)
+		if (mask & (1 << i))
+			bfin_write(&group_regs[BFIN_TIMER_OCTET(i)]->status, trun_mask[i]);
+	SSYNC();
+#else
+	_disable_gptimers(mask);
+#endif
+}
+EXPORT_SYMBOL(disable_gptimers);
+
+void disable_gptimers_sync(uint16_t mask)
+{
+	_disable_gptimers(mask);
+	SSYNC();
+}
+EXPORT_SYMBOL(disable_gptimers_sync);
+
+void set_gptimer_pulse_hi(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	bfin_write_or(&timer_regs[timer_id]->config, TIMER_PULSE_HI);
+	SSYNC();
+}
+EXPORT_SYMBOL(set_gptimer_pulse_hi);
+
+void clear_gptimer_pulse_hi(unsigned int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	bfin_write_and(&timer_regs[timer_id]->config, ~TIMER_PULSE_HI);
+	SSYNC();
+}
+EXPORT_SYMBOL(clear_gptimer_pulse_hi);
+
+uint16_t get_enabled_gptimers(void)
+{
+	int i;
+	uint16_t result = 0;
+	for (i = 0; i < BFIN_TIMER_NUM_GROUP; ++i)
+		result |= (bfin_read(&group_regs[i]->enable) << (i << 3));
+	return result;
+}
+EXPORT_SYMBOL(get_enabled_gptimers);
+
+MODULE_AUTHOR("Axel Weiss (awe@aglaia-gmbh.de)");
+MODULE_DESCRIPTION("Blackfin General Purpose Timers API");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/ipipe.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/ipipe.c
new file mode 100644
index 0000000..f657b38
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/ipipe.c
@@ -0,0 +1,397 @@
+/* -*- linux-c -*-
+ * linux/arch/blackfin/kernel/ipipe.c
+ *
+ * Copyright (C) 2005-2007 Philippe Gerum.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139,
+ * USA; either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Architecture-dependent I-pipe support for the Blackfin.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/kthread.h>
+#include <linux/unistd.h>
+#include <linux/io.h>
+#include <linux/atomic.h>
+#include <asm/irq_handler.h>
+
+DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
+
+asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
+
+static void __ipipe_no_irqtail(void);
+
+unsigned long __ipipe_irq_tail_hook = (unsigned long)&__ipipe_no_irqtail;
+EXPORT_SYMBOL(__ipipe_irq_tail_hook);
+
+unsigned long __ipipe_core_clock;
+EXPORT_SYMBOL(__ipipe_core_clock);
+
+unsigned long __ipipe_freq_scale;
+EXPORT_SYMBOL(__ipipe_freq_scale);
+
+atomic_t __ipipe_irq_lvdepth[IVG15 + 1];
+
+unsigned long __ipipe_irq_lvmask = bfin_no_irqs;
+EXPORT_SYMBOL(__ipipe_irq_lvmask);
+
+static void __ipipe_ack_irq(unsigned irq, struct irq_desc *desc)
+{
+	desc->ipipe_ack(irq, desc);
+}
+
+/*
+ * __ipipe_enable_pipeline() -- We are running on the boot CPU, hw
+ * interrupts are off, and secondary CPUs are still lost in space.
+ */
+void __ipipe_enable_pipeline(void)
+{
+	unsigned irq;
+
+	__ipipe_core_clock = get_cclk(); /* Fetch this once. */
+	__ipipe_freq_scale = 1000000000UL / __ipipe_core_clock;
+
+	for (irq = 0; irq < NR_IRQS; ++irq)
+		ipipe_virtualize_irq(ipipe_root_domain,
+				     irq,
+				     (ipipe_irq_handler_t)&asm_do_IRQ,
+				     NULL,
+				     &__ipipe_ack_irq,
+				     IPIPE_HANDLE_MASK | IPIPE_PASS_MASK);
+}
+
+/*
+ * __ipipe_handle_irq() -- IPIPE's generic IRQ handler. An optimistic
+ * interrupt protection log is maintained here for each domain. Hw
+ * interrupts are masked on entry.
+ */
+void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
+{
+	struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
+	struct ipipe_domain *this_domain, *next_domain;
+	struct list_head *head, *pos;
+	struct ipipe_irqdesc *idesc;
+	int m_ack, s = -1;
+
+	/*
+	 * Software-triggered IRQs do not need any ack.  The contents
+	 * of the register frame should only be used when processing
+	 * the timer interrupt, but not for handling any other
+	 * interrupt.
+	 */
+	m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
+	this_domain = __ipipe_current_domain;
+	idesc = &this_domain->irqs[irq];
+
+	if (unlikely(test_bit(IPIPE_STICKY_FLAG, &idesc->control)))
+		head = &this_domain->p_link;
+	else {
+		head = __ipipe_pipeline.next;
+		next_domain = list_entry(head, struct ipipe_domain, p_link);
+		idesc = &next_domain->irqs[irq];
+		if (likely(test_bit(IPIPE_WIRED_FLAG, &idesc->control))) {
+			if (!m_ack && idesc->acknowledge != NULL)
+				idesc->acknowledge(irq, irq_to_desc(irq));
+			if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+				s = __test_and_set_bit(IPIPE_STALL_FLAG,
+						       &p->status);
+			__ipipe_dispatch_wired(next_domain, irq);
+			goto out;
+		}
+	}
+
+	/* Ack the interrupt. */
+
+	pos = head;
+	while (pos != &__ipipe_pipeline) {
+		next_domain = list_entry(pos, struct ipipe_domain, p_link);
+		idesc = &next_domain->irqs[irq];
+		if (test_bit(IPIPE_HANDLE_FLAG, &idesc->control)) {
+			__ipipe_set_irq_pending(next_domain, irq);
+			if (!m_ack && idesc->acknowledge != NULL) {
+				idesc->acknowledge(irq, irq_to_desc(irq));
+				m_ack = 1;
+			}
+		}
+		if (!test_bit(IPIPE_PASS_FLAG, &idesc->control))
+			break;
+		pos = next_domain->p_link.next;
+	}
+
+	/*
+	 * Now walk the pipeline, yielding control to the highest
+	 * priority domain that has pending interrupt(s) or
+	 * immediately to the current domain if the interrupt has been
+	 * marked as 'sticky'. This search does not go beyond the
+	 * current domain in the pipeline. We also enforce the
+	 * additional root stage lock (blackfin-specific).
+	 */
+	if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+		s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
+
+	/*
+	 * If the interrupt preempted the head domain, then do not
+	 * even try to walk the pipeline, unless an interrupt is
+	 * pending for it.
+	 */
+	if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) &&
+	    !__ipipe_ipending_p(ipipe_head_cpudom_ptr()))
+		goto out;
+
+	__ipipe_walk_pipeline(head);
+out:
+	if (!s)
+		__clear_bit(IPIPE_STALL_FLAG, &p->status);
+}
+
+void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+	int prio = __ipipe_get_irq_priority(irq);
+
+	desc->depth = 0;
+	if (ipd != &ipipe_root &&
+	    atomic_inc_return(&__ipipe_irq_lvdepth[prio]) == 1)
+		__set_bit(prio, &__ipipe_irq_lvmask);
+}
+EXPORT_SYMBOL(__ipipe_enable_irqdesc);
+
+void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
+{
+	int prio = __ipipe_get_irq_priority(irq);
+
+	if (ipd != &ipipe_root &&
+	    atomic_dec_and_test(&__ipipe_irq_lvdepth[prio]))
+		__clear_bit(prio, &__ipipe_irq_lvmask);
+}
+EXPORT_SYMBOL(__ipipe_disable_irqdesc);
+
+asmlinkage int __ipipe_syscall_root(struct pt_regs *regs)
+{
+	struct ipipe_percpu_domain_data *p;
+	void (*hook)(void);
+	int ret;
+
+	WARN_ON_ONCE(irqs_disabled_hw());
+
+	/*
+	 * We need to run the IRQ tail hook each time we intercept a
+	 * syscall, because we know that important operations might be
+	 * pending there (e.g. Xenomai deferred rescheduling).
+	 */
+	hook = (__typeof__(hook))__ipipe_irq_tail_hook;
+	hook();
+
+	/*
+	 * This routine either returns:
+	 * 0 -- if the syscall is to be passed to Linux;
+	 * >0 -- if the syscall should not be passed to Linux, and no
+	 * tail work should be performed;
+	 * <0 -- if the syscall should not be passed to Linux but the
+	 * tail work has to be performed (for handling signals etc).
+	 */
+
+	if (!__ipipe_syscall_watched_p(current, regs->orig_p0) ||
+	    !__ipipe_event_monitored_p(IPIPE_EVENT_SYSCALL))
+		return 0;
+
+	ret = __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs);
+
+	hard_local_irq_disable();
+
+	/*
+	 * This is the end of the syscall path, so we may
+	 * safely assume a valid Linux task stack here.
+	 */
+	if (current->ipipe_flags & PF_EVTRET) {
+		current->ipipe_flags &= ~PF_EVTRET;
+		__ipipe_dispatch_event(IPIPE_EVENT_RETURN, regs);
+	}
+
+	if (!__ipipe_root_domain_p)
+		ret = -1;
+	else {
+		p = ipipe_root_cpudom_ptr();
+		if (__ipipe_ipending_p(p))
+			__ipipe_sync_pipeline();
+	}
+
+	hard_local_irq_enable();
+
+	return -ret;
+}
+
+static void __ipipe_no_irqtail(void)
+{
+}
+
+int ipipe_get_sysinfo(struct ipipe_sysinfo *info)
+{
+	info->sys_nr_cpus = num_online_cpus();
+	info->sys_cpu_freq = ipipe_cpu_freq();
+	info->sys_hrtimer_irq = IPIPE_TIMER_IRQ;
+	info->sys_hrtimer_freq = __ipipe_core_clock;
+	info->sys_hrclock_freq = __ipipe_core_clock;
+
+	return 0;
+}
+
+/*
+ * ipipe_trigger_irq() -- Push the interrupt at front of the pipeline
+ * just like if it has been actually received from a hw source. Also
+ * works for virtual interrupts.
+ */
+int ipipe_trigger_irq(unsigned irq)
+{
+	unsigned long flags;
+
+#ifdef CONFIG_IPIPE_DEBUG
+	if (irq >= IPIPE_NR_IRQS ||
+	    (ipipe_virtual_irq_p(irq)
+	     && !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map)))
+		return -EINVAL;
+#endif
+
+	flags = hard_local_irq_save();
+	__ipipe_handle_irq(irq, NULL);
+	hard_local_irq_restore(flags);
+
+	return 1;
+}
+
+asmlinkage void __ipipe_sync_root(void)
+{
+	void (*irq_tail_hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
+	struct ipipe_percpu_domain_data *p;
+	unsigned long flags;
+
+	BUG_ON(irqs_disabled());
+
+	flags = hard_local_irq_save();
+
+	if (irq_tail_hook)
+		irq_tail_hook();
+
+	clear_thread_flag(TIF_IRQ_SYNC);
+
+	p = ipipe_root_cpudom_ptr();
+	if (__ipipe_ipending_p(p))
+		__ipipe_sync_pipeline();
+
+	hard_local_irq_restore(flags);
+}
+
+void ___ipipe_sync_pipeline(void)
+{
+	if (__ipipe_root_domain_p &&
+	    test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
+		return;
+
+	__ipipe_sync_stage();
+}
+
+void __ipipe_disable_root_irqs_hw(void)
+{
+	/*
+	 * This code is called by the ins{bwl} routines (see
+	 * arch/blackfin/lib/ins.S), which are heavily used by the
+	 * network stack. It masks all interrupts but those handled by
+	 * non-root domains, so that we keep decent network transfer
+	 * rates for Linux without inducing pathological jitter for
+	 * the real-time domain.
+	 */
+	bfin_sti(__ipipe_irq_lvmask);
+	__set_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
+}
+
+void __ipipe_enable_root_irqs_hw(void)
+{
+	__clear_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
+	bfin_sti(bfin_irq_flags);
+}
+
+/*
+ * We could use standard atomic bitops in the following root status
+ * manipulation routines, but let's prepare for SMP support in the
+ * same move, preventing CPU migration as required.
+ */
+void __ipipe_stall_root(void)
+{
+	unsigned long *p, flags;
+
+	flags = hard_local_irq_save();
+	p = &__ipipe_root_status;
+	__set_bit(IPIPE_STALL_FLAG, p);
+	hard_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__ipipe_stall_root);
+
+unsigned long __ipipe_test_and_stall_root(void)
+{
+	unsigned long *p, flags;
+	int x;
+
+	flags = hard_local_irq_save();
+	p = &__ipipe_root_status;
+	x = __test_and_set_bit(IPIPE_STALL_FLAG, p);
+	hard_local_irq_restore(flags);
+
+	return x;
+}
+EXPORT_SYMBOL(__ipipe_test_and_stall_root);
+
+unsigned long __ipipe_test_root(void)
+{
+	const unsigned long *p;
+	unsigned long flags;
+	int x;
+
+	flags = hard_local_irq_save_smp();
+	p = &__ipipe_root_status;
+	x = test_bit(IPIPE_STALL_FLAG, p);
+	hard_local_irq_restore_smp(flags);
+
+	return x;
+}
+EXPORT_SYMBOL(__ipipe_test_root);
+
+void __ipipe_lock_root(void)
+{
+	unsigned long *p, flags;
+
+	flags = hard_local_irq_save();
+	p = &__ipipe_root_status;
+	__set_bit(IPIPE_SYNCDEFER_FLAG, p);
+	hard_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__ipipe_lock_root);
+
+void __ipipe_unlock_root(void)
+{
+	unsigned long *p, flags;
+
+	flags = hard_local_irq_save();
+	p = &__ipipe_root_status;
+	__clear_bit(IPIPE_SYNCDEFER_FLAG, p);
+	hard_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__ipipe_unlock_root);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/irqchip.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/irqchip.c
new file mode 100644
index 0000000..052cde5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/irqchip.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2005-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/random.h>
+#include <linux/seq_file.h>
+#include <linux/kallsyms.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <asm/irq_handler.h>
+#include <asm/trace.h>
+#include <asm/pda.h>
+
+static atomic_t irq_err_count;
+void ack_bad_irq(unsigned int irq)
+{
+	atomic_inc(&irq_err_count);
+	printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq);
+}
+
+static struct irq_desc bad_irq_desc = {
+	.handle_irq = handle_bad_irq,
+	.lock = __RAW_SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
+};
+
+#ifdef CONFIG_CPUMASK_OFFSTACK
+/* We are not allocating a variable-sized bad_irq_desc.affinity */
+#error "Blackfin architecture does not support CONFIG_CPUMASK_OFFSTACK."
+#endif
+
+#ifdef CONFIG_PROC_FS
+int arch_show_interrupts(struct seq_file *p, int prec)
+{
+	int j;
+
+	seq_printf(p, "%*s: ", prec, "NMI");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", cpu_pda[j].__nmi_count);
+	seq_printf(p, "  CORE  Non Maskable Interrupt\n");
+	seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+static void check_stack_overflow(int irq)
+{
+	/* Debugging check for stack overflow: is there less than STACK_WARN free? */
+	long sp = __get_SP() & (THREAD_SIZE - 1);
+
+	if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
+		dump_stack();
+		pr_emerg("irq%i: possible stack overflow only %ld bytes free\n",
+			irq, sp - sizeof(struct thread_info));
+	}
+}
+#else
+static inline void check_stack_overflow(int irq) { }
+#endif
+
+#ifndef CONFIG_IPIPE
+static void maybe_lower_to_irq14(void)
+{
+	unsigned short pending, other_ints;
+
+	/*
+	 * If we're the only interrupt running (ignoring IRQ15 which
+	 * is for syscalls), lower our priority to IRQ14 so that
+	 * softirqs run at that level.  If there's another,
+	 * lower-level interrupt, irq_exit will defer softirqs to
+	 * that. If the interrupt pipeline is enabled, we are already
+	 * running at IRQ14 priority, so we don't need this code.
+	 */
+	CSYNC();
+	pending = bfin_read_IPEND() & ~0x8000;
+	other_ints = pending & (pending - 1);
+	if (other_ints == 0)
+		lower_to_irq14();
+}
+#else
+static inline void maybe_lower_to_irq14(void) { }
+#endif
+
+/*
+ * do_IRQ handles all hardware IRQs.  Decoded IRQs should not
+ * come via this function.  Instead, they should provide their
+ * own 'handler'
+ */
+#ifdef CONFIG_DO_IRQ_L1
+__attribute__((l1_text))
+#endif
+asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+
+	irq_enter();
+
+	check_stack_overflow(irq);
+
+	/*
+	 * Some hardware gives randomly wrong interrupts.  Rather
+	 * than crashing, do something sensible.
+	 */
+	if (irq >= NR_IRQS)
+		handle_bad_irq(&bad_irq_desc);
+	else
+		generic_handle_irq(irq);
+
+	maybe_lower_to_irq14();
+
+	irq_exit();
+
+	set_irq_regs(old_regs);
+}
+
+void __init init_IRQ(void)
+{
+	init_arch_irq();
+
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	/* Now that evt_ivhw is set up, turn this on */
+	trace_buff_offset = 0;
+	bfin_write_TBUFCTL(BFIN_TRACE_ON);
+	printk(KERN_INFO "Hardware Trace expanded to %ik\n",
+	  1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN);
+#endif
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/kgdb.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/kgdb.c
new file mode 100644
index 0000000..cf773f0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/kgdb.c
@@ -0,0 +1,473 @@
+/*
+ * arch/blackfin/kernel/kgdb.c - Blackfin kgdb pieces
+ *
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/ptrace.h>		/* for linux pt_regs struct */
+#include <linux/kgdb.h>
+#include <linux/uaccess.h>
+#include <asm/irq_regs.h>
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	gdb_regs[BFIN_R0] = regs->r0;
+	gdb_regs[BFIN_R1] = regs->r1;
+	gdb_regs[BFIN_R2] = regs->r2;
+	gdb_regs[BFIN_R3] = regs->r3;
+	gdb_regs[BFIN_R4] = regs->r4;
+	gdb_regs[BFIN_R5] = regs->r5;
+	gdb_regs[BFIN_R6] = regs->r6;
+	gdb_regs[BFIN_R7] = regs->r7;
+	gdb_regs[BFIN_P0] = regs->p0;
+	gdb_regs[BFIN_P1] = regs->p1;
+	gdb_regs[BFIN_P2] = regs->p2;
+	gdb_regs[BFIN_P3] = regs->p3;
+	gdb_regs[BFIN_P4] = regs->p4;
+	gdb_regs[BFIN_P5] = regs->p5;
+	gdb_regs[BFIN_SP] = regs->reserved;
+	gdb_regs[BFIN_FP] = regs->fp;
+	gdb_regs[BFIN_I0] = regs->i0;
+	gdb_regs[BFIN_I1] = regs->i1;
+	gdb_regs[BFIN_I2] = regs->i2;
+	gdb_regs[BFIN_I3] = regs->i3;
+	gdb_regs[BFIN_M0] = regs->m0;
+	gdb_regs[BFIN_M1] = regs->m1;
+	gdb_regs[BFIN_M2] = regs->m2;
+	gdb_regs[BFIN_M3] = regs->m3;
+	gdb_regs[BFIN_B0] = regs->b0;
+	gdb_regs[BFIN_B1] = regs->b1;
+	gdb_regs[BFIN_B2] = regs->b2;
+	gdb_regs[BFIN_B3] = regs->b3;
+	gdb_regs[BFIN_L0] = regs->l0;
+	gdb_regs[BFIN_L1] = regs->l1;
+	gdb_regs[BFIN_L2] = regs->l2;
+	gdb_regs[BFIN_L3] = regs->l3;
+	gdb_regs[BFIN_A0_DOT_X] = regs->a0x;
+	gdb_regs[BFIN_A0_DOT_W] = regs->a0w;
+	gdb_regs[BFIN_A1_DOT_X] = regs->a1x;
+	gdb_regs[BFIN_A1_DOT_W] = regs->a1w;
+	gdb_regs[BFIN_ASTAT] = regs->astat;
+	gdb_regs[BFIN_RETS] = regs->rets;
+	gdb_regs[BFIN_LC0] = regs->lc0;
+	gdb_regs[BFIN_LT0] = regs->lt0;
+	gdb_regs[BFIN_LB0] = regs->lb0;
+	gdb_regs[BFIN_LC1] = regs->lc1;
+	gdb_regs[BFIN_LT1] = regs->lt1;
+	gdb_regs[BFIN_LB1] = regs->lb1;
+	gdb_regs[BFIN_CYCLES] = 0;
+	gdb_regs[BFIN_CYCLES2] = 0;
+	gdb_regs[BFIN_USP] = regs->usp;
+	gdb_regs[BFIN_SEQSTAT] = regs->seqstat;
+	gdb_regs[BFIN_SYSCFG] = regs->syscfg;
+	gdb_regs[BFIN_RETI] = regs->pc;
+	gdb_regs[BFIN_RETX] = regs->retx;
+	gdb_regs[BFIN_RETN] = regs->retn;
+	gdb_regs[BFIN_RETE] = regs->rete;
+	gdb_regs[BFIN_PC] = regs->pc;
+	gdb_regs[BFIN_CC] = (regs->astat >> 5) & 1;
+	gdb_regs[BFIN_EXTRA1] = 0;
+	gdb_regs[BFIN_EXTRA2] = 0;
+	gdb_regs[BFIN_EXTRA3] = 0;
+	gdb_regs[BFIN_IPEND] = regs->ipend;
+}
+
+/*
+ * Extracts ebp, esp and eip values understandable by gdb from the values
+ * saved by switch_to.
+ * thread.esp points to ebp. flags and ebp are pushed in switch_to hence esp
+ * prior to entering switch_to is 8 greater than the value that is saved.
+ * If switch_to changes, change following code appropriately.
+ */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	gdb_regs[BFIN_SP] = p->thread.ksp;
+	gdb_regs[BFIN_PC] = p->thread.pc;
+	gdb_regs[BFIN_SEQSTAT] = p->thread.seqstat;
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	regs->r0 = gdb_regs[BFIN_R0];
+	regs->r1 = gdb_regs[BFIN_R1];
+	regs->r2 = gdb_regs[BFIN_R2];
+	regs->r3 = gdb_regs[BFIN_R3];
+	regs->r4 = gdb_regs[BFIN_R4];
+	regs->r5 = gdb_regs[BFIN_R5];
+	regs->r6 = gdb_regs[BFIN_R6];
+	regs->r7 = gdb_regs[BFIN_R7];
+	regs->p0 = gdb_regs[BFIN_P0];
+	regs->p1 = gdb_regs[BFIN_P1];
+	regs->p2 = gdb_regs[BFIN_P2];
+	regs->p3 = gdb_regs[BFIN_P3];
+	regs->p4 = gdb_regs[BFIN_P4];
+	regs->p5 = gdb_regs[BFIN_P5];
+	regs->fp = gdb_regs[BFIN_FP];
+	regs->i0 = gdb_regs[BFIN_I0];
+	regs->i1 = gdb_regs[BFIN_I1];
+	regs->i2 = gdb_regs[BFIN_I2];
+	regs->i3 = gdb_regs[BFIN_I3];
+	regs->m0 = gdb_regs[BFIN_M0];
+	regs->m1 = gdb_regs[BFIN_M1];
+	regs->m2 = gdb_regs[BFIN_M2];
+	regs->m3 = gdb_regs[BFIN_M3];
+	regs->b0 = gdb_regs[BFIN_B0];
+	regs->b1 = gdb_regs[BFIN_B1];
+	regs->b2 = gdb_regs[BFIN_B2];
+	regs->b3 = gdb_regs[BFIN_B3];
+	regs->l0 = gdb_regs[BFIN_L0];
+	regs->l1 = gdb_regs[BFIN_L1];
+	regs->l2 = gdb_regs[BFIN_L2];
+	regs->l3 = gdb_regs[BFIN_L3];
+	regs->a0x = gdb_regs[BFIN_A0_DOT_X];
+	regs->a0w = gdb_regs[BFIN_A0_DOT_W];
+	regs->a1x = gdb_regs[BFIN_A1_DOT_X];
+	regs->a1w = gdb_regs[BFIN_A1_DOT_W];
+	regs->rets = gdb_regs[BFIN_RETS];
+	regs->lc0 = gdb_regs[BFIN_LC0];
+	regs->lt0 = gdb_regs[BFIN_LT0];
+	regs->lb0 = gdb_regs[BFIN_LB0];
+	regs->lc1 = gdb_regs[BFIN_LC1];
+	regs->lt1 = gdb_regs[BFIN_LT1];
+	regs->lb1 = gdb_regs[BFIN_LB1];
+	regs->usp = gdb_regs[BFIN_USP];
+	regs->syscfg = gdb_regs[BFIN_SYSCFG];
+	regs->retx = gdb_regs[BFIN_RETX];
+	regs->retn = gdb_regs[BFIN_RETN];
+	regs->rete = gdb_regs[BFIN_RETE];
+	regs->pc = gdb_regs[BFIN_PC];
+
+#if 0				/* can't change these */
+	regs->astat = gdb_regs[BFIN_ASTAT];
+	regs->seqstat = gdb_regs[BFIN_SEQSTAT];
+	regs->ipend = gdb_regs[BFIN_IPEND];
+#endif
+}
+
+static struct hw_breakpoint {
+	unsigned int occupied:1;
+	unsigned int skip:1;
+	unsigned int enabled:1;
+	unsigned int type:1;
+	unsigned int dataacc:2;
+	unsigned short count;
+	unsigned int addr;
+} breakinfo[HW_WATCHPOINT_NUM];
+
+static int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
+{
+	int breakno;
+	int bfin_type;
+	int dataacc = 0;
+
+	switch (type) {
+	case BP_HARDWARE_BREAKPOINT:
+		bfin_type = TYPE_INST_WATCHPOINT;
+		break;
+	case BP_WRITE_WATCHPOINT:
+		dataacc = 1;
+		bfin_type = TYPE_DATA_WATCHPOINT;
+		break;
+	case BP_READ_WATCHPOINT:
+		dataacc = 2;
+		bfin_type = TYPE_DATA_WATCHPOINT;
+		break;
+	case BP_ACCESS_WATCHPOINT:
+		dataacc = 3;
+		bfin_type = TYPE_DATA_WATCHPOINT;
+		break;
+	default:
+		return -ENOSPC;
+	}
+
+	/* Because hardware data watchpoint impelemented in current
+	 * Blackfin can not trigger an exception event as the hardware
+	 * instrction watchpoint does, we ignaore all data watch point here.
+	 * They can be turned on easily after future blackfin design
+	 * supports this feature.
+	 */
+	for (breakno = 0; breakno < HW_INST_WATCHPOINT_NUM; breakno++)
+		if (bfin_type == breakinfo[breakno].type
+			&& !breakinfo[breakno].occupied) {
+			breakinfo[breakno].occupied = 1;
+			breakinfo[breakno].skip = 0;
+			breakinfo[breakno].enabled = 1;
+			breakinfo[breakno].addr = addr;
+			breakinfo[breakno].dataacc = dataacc;
+			breakinfo[breakno].count = 0;
+			return 0;
+		}
+
+	return -ENOSPC;
+}
+
+static int bfin_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
+{
+	int breakno;
+	int bfin_type;
+
+	switch (type) {
+	case BP_HARDWARE_BREAKPOINT:
+		bfin_type = TYPE_INST_WATCHPOINT;
+		break;
+	case BP_WRITE_WATCHPOINT:
+	case BP_READ_WATCHPOINT:
+	case BP_ACCESS_WATCHPOINT:
+		bfin_type = TYPE_DATA_WATCHPOINT;
+		break;
+	default:
+		return 0;
+	}
+	for (breakno = 0; breakno < HW_WATCHPOINT_NUM; breakno++)
+		if (bfin_type == breakinfo[breakno].type
+			&& breakinfo[breakno].occupied
+			&& breakinfo[breakno].addr == addr) {
+			breakinfo[breakno].occupied = 0;
+			breakinfo[breakno].enabled = 0;
+		}
+
+	return 0;
+}
+
+static void bfin_remove_all_hw_break(void)
+{
+	int breakno;
+
+	memset(breakinfo, 0, sizeof(struct hw_breakpoint)*HW_WATCHPOINT_NUM);
+
+	for (breakno = 0; breakno < HW_INST_WATCHPOINT_NUM; breakno++)
+		breakinfo[breakno].type = TYPE_INST_WATCHPOINT;
+	for (; breakno < HW_WATCHPOINT_NUM; breakno++)
+		breakinfo[breakno].type = TYPE_DATA_WATCHPOINT;
+}
+
+static void bfin_correct_hw_break(void)
+{
+	int breakno;
+	unsigned int wpiactl = 0;
+	unsigned int wpdactl = 0;
+	int enable_wp = 0;
+
+	for (breakno = 0; breakno < HW_WATCHPOINT_NUM; breakno++)
+		if (breakinfo[breakno].enabled) {
+			enable_wp = 1;
+
+			switch (breakno) {
+			case 0:
+				wpiactl |= WPIAEN0|WPICNTEN0;
+				bfin_write_WPIA0(breakinfo[breakno].addr);
+				bfin_write_WPIACNT0(breakinfo[breakno].count
+					+ breakinfo->skip);
+				break;
+			case 1:
+				wpiactl |= WPIAEN1|WPICNTEN1;
+				bfin_write_WPIA1(breakinfo[breakno].addr);
+				bfin_write_WPIACNT1(breakinfo[breakno].count
+					+ breakinfo->skip);
+				break;
+			case 2:
+				wpiactl |= WPIAEN2|WPICNTEN2;
+				bfin_write_WPIA2(breakinfo[breakno].addr);
+				bfin_write_WPIACNT2(breakinfo[breakno].count
+					+ breakinfo->skip);
+				break;
+			case 3:
+				wpiactl |= WPIAEN3|WPICNTEN3;
+				bfin_write_WPIA3(breakinfo[breakno].addr);
+				bfin_write_WPIACNT3(breakinfo[breakno].count
+					+ breakinfo->skip);
+				break;
+			case 4:
+				wpiactl |= WPIAEN4|WPICNTEN4;
+				bfin_write_WPIA4(breakinfo[breakno].addr);
+				bfin_write_WPIACNT4(breakinfo[breakno].count
+					+ breakinfo->skip);
+				break;
+			case 5:
+				wpiactl |= WPIAEN5|WPICNTEN5;
+				bfin_write_WPIA5(breakinfo[breakno].addr);
+				bfin_write_WPIACNT5(breakinfo[breakno].count
+					+ breakinfo->skip);
+				break;
+			case 6:
+				wpdactl |= WPDAEN0|WPDCNTEN0|WPDSRC0;
+				wpdactl |= breakinfo[breakno].dataacc
+					<< WPDACC0_OFFSET;
+				bfin_write_WPDA0(breakinfo[breakno].addr);
+				bfin_write_WPDACNT0(breakinfo[breakno].count
+					+ breakinfo->skip);
+				break;
+			case 7:
+				wpdactl |= WPDAEN1|WPDCNTEN1|WPDSRC1;
+				wpdactl |= breakinfo[breakno].dataacc
+					<< WPDACC1_OFFSET;
+				bfin_write_WPDA1(breakinfo[breakno].addr);
+				bfin_write_WPDACNT1(breakinfo[breakno].count
+					+ breakinfo->skip);
+				break;
+			}
+		}
+
+	/* Should enable WPPWR bit first before set any other
+	 * WPIACTL and WPDACTL bits */
+	if (enable_wp) {
+		bfin_write_WPIACTL(WPPWR);
+		CSYNC();
+		bfin_write_WPIACTL(wpiactl|WPPWR);
+		bfin_write_WPDACTL(wpdactl);
+		CSYNC();
+	}
+}
+
+static void bfin_disable_hw_debug(struct pt_regs *regs)
+{
+	/* Disable hardware debugging while we are in kgdb */
+	bfin_write_WPIACTL(0);
+	bfin_write_WPDACTL(0);
+	CSYNC();
+}
+
+#ifdef CONFIG_SMP
+void kgdb_passive_cpu_callback(void *info)
+{
+	kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	unsigned int cpu;
+
+	for (cpu = cpumask_first(cpu_online_mask); cpu < nr_cpu_ids;
+		cpu = cpumask_next(cpu, cpu_online_mask))
+		smp_call_function_single(cpu, kgdb_passive_cpu_callback,
+					 NULL, 0);
+}
+
+void kgdb_roundup_cpu(int cpu, unsigned long flags)
+{
+	smp_call_function_single(cpu, kgdb_passive_cpu_callback, NULL, 0);
+}
+#endif
+
+#ifdef CONFIG_IPIPE
+static unsigned long kgdb_arch_imask;
+#endif
+
+int kgdb_arch_handle_exception(int vector, int signo,
+			       int err_code, char *remcom_in_buffer,
+			       char *remcom_out_buffer,
+			       struct pt_regs *regs)
+{
+	long addr;
+	char *ptr;
+	int newPC;
+	int i;
+
+	switch (remcom_in_buffer[0]) {
+	case 'c':
+	case 's':
+		if (kgdb_contthread && kgdb_contthread != current) {
+			strcpy(remcom_out_buffer, "E00");
+			break;
+		}
+
+		kgdb_contthread = NULL;
+
+		/* try to read optional parameter, pc unchanged if no parm */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &addr)) {
+			regs->retx = addr;
+		}
+		newPC = regs->retx;
+
+		/* clear the trace bit */
+		regs->syscfg &= 0xfffffffe;
+
+		/* set the trace bit if we're stepping */
+		if (remcom_in_buffer[0] == 's') {
+			regs->syscfg |= 0x1;
+			kgdb_single_step = regs->ipend;
+			kgdb_single_step >>= 6;
+			for (i = 10; i > 0; i--, kgdb_single_step >>= 1)
+				if (kgdb_single_step & 1)
+					break;
+			/* i indicate event priority of current stopped instruction
+			 * user space instruction is 0, IVG15 is 1, IVTMR is 10.
+			 * kgdb_single_step > 0 means in single step mode
+			 */
+			kgdb_single_step = i + 1;
+
+			preempt_disable();
+#ifdef CONFIG_IPIPE
+			kgdb_arch_imask = cpu_pda[raw_smp_processor_id()].ex_imask;
+			cpu_pda[raw_smp_processor_id()].ex_imask = 0;
+#endif
+		}
+
+		bfin_correct_hw_break();
+
+		return 0;
+	}			/* switch */
+	return -1;		/* this means that we do not want to exit from the handler */
+}
+
+struct kgdb_arch arch_kgdb_ops = {
+	.gdb_bpt_instr = {0xa1},
+	.flags = KGDB_HW_BREAKPOINT,
+	.set_hw_breakpoint = bfin_set_hw_break,
+	.remove_hw_breakpoint = bfin_remove_hw_break,
+	.disable_hw_break = bfin_disable_hw_debug,
+	.remove_all_hw_break = bfin_remove_all_hw_break,
+	.correct_hw_break = bfin_correct_hw_break,
+};
+
+#define IN_MEM(addr, size, l1_addr, l1_size) \
+({ \
+	unsigned long __addr = (unsigned long)(addr); \
+	(l1_size && __addr >= l1_addr && __addr + (size) <= l1_addr + l1_size); \
+})
+#define ASYNC_BANK_SIZE \
+	(ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \
+	 ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE)
+
+int kgdb_validate_break_address(unsigned long addr)
+{
+	int cpu = raw_smp_processor_id();
+
+	if (addr >= 0x1000 && (addr + BREAK_INSTR_SIZE) <= physical_mem_end)
+		return 0;
+	if (IN_MEM(addr, BREAK_INSTR_SIZE, ASYNC_BANK0_BASE, ASYNC_BANK_SIZE))
+		return 0;
+	if (cpu == 0 && IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH))
+		return 0;
+#ifdef CONFIG_SMP
+	else if (cpu == 1 && IN_MEM(addr, BREAK_INSTR_SIZE, COREB_L1_CODE_START, L1_CODE_LENGTH))
+		return 0;
+#endif
+	if (IN_MEM(addr, BREAK_INSTR_SIZE, L2_START, L2_LENGTH))
+		return 0;
+
+	return -EFAULT;
+}
+
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+	regs->retx = ip;
+}
+
+int kgdb_arch_init(void)
+{
+	kgdb_single_step = 0;
+#ifdef CONFIG_IPIPE
+	kgdb_arch_imask = 0;
+#endif
+
+	bfin_remove_all_hw_break();
+	return 0;
+}
+
+void kgdb_arch_exit(void)
+{
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/kgdb_test.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/kgdb_test.c
new file mode 100644
index 0000000..b8b785d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/kgdb_test.c
@@ -0,0 +1,114 @@
+/*
+ * arch/blackfin/kernel/kgdb_test.c - Blackfin kgdb tests
+ *
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+
+#include <asm/current.h>
+#include <linux/uaccess.h>
+
+#include <asm/blackfin.h>
+
+/* Symbols are here for kgdb test to poke directly */
+static char cmdline[256];
+static size_t len;
+
+#ifndef CONFIG_SMP
+static int num1 __attribute__((l1_data));
+
+void kgdb_l1_test(void) __attribute__((l1_text));
+
+void kgdb_l1_test(void)
+{
+	pr_alert("L1(before change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
+	pr_alert("L1 : code function addr = 0x%p\n", kgdb_l1_test);
+	num1 = num1 + 10;
+	pr_alert("L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
+}
+#endif
+
+#if L2_LENGTH
+
+static int num2 __attribute__((l2));
+void kgdb_l2_test(void) __attribute__((l2));
+
+void kgdb_l2_test(void)
+{
+	pr_alert("L2(before change) : data variable addr = 0x%p, data value is %d\n", &num2, num2);
+	pr_alert("L2 : code function addr = 0x%p\n", kgdb_l2_test);
+	num2 = num2 + 20;
+	pr_alert("L2(after change) : data variable addr = 0x%p, data value is %d\n", &num2, num2);
+}
+
+#endif
+
+noinline int kgdb_test(char *name, int len, int count, int z)
+{
+	pr_alert("kgdb name(%d): %s, %d, %d\n", len, name, count, z);
+	count = z;
+	return count;
+}
+
+static ssize_t
+kgdb_test_proc_read(struct file *file, char __user *buf,
+                    size_t count, loff_t *ppos)
+{
+	kgdb_test("hello world!", 12, 0x55, 0x10);
+#ifndef CONFIG_SMP
+	kgdb_l1_test();
+#endif
+#if L2_LENGTH
+	kgdb_l2_test();
+#endif
+
+	return 0;
+}
+
+static ssize_t
+kgdb_test_proc_write(struct file *file, const char __user *buffer,
+                     size_t count, loff_t *pos)
+{
+	len = min_t(size_t, 255, count);
+	memcpy(cmdline, buffer, count);
+	cmdline[len] = 0;
+
+	return len;
+}
+
+static const struct file_operations kgdb_test_proc_fops = {
+	.owner = THIS_MODULE,
+	.read  = kgdb_test_proc_read,
+	.write = kgdb_test_proc_write,
+	.llseek = noop_llseek,
+};
+
+static int __init kgdbtest_init(void)
+{
+	struct proc_dir_entry *entry;
+
+#if L2_LENGTH
+	num2 = 0;
+#endif
+
+	entry = proc_create("kgdbtest", 0, NULL, &kgdb_test_proc_fops);
+	if (entry == NULL)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void __exit kgdbtest_exit(void)
+{
+	remove_proc_entry("kgdbtest", NULL);
+}
+
+module_init(kgdbtest_init);
+module_exit(kgdbtest_exit);
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/module.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/module.c
new file mode 100644
index 0000000..15af576
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/module.c
@@ -0,0 +1,292 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <asm/dma.h>
+#include <asm/cacheflush.h>
+#include <linux/uaccess.h>
+
+#define mod_err(mod, fmt, ...)						\
+	pr_err("module %s: " fmt, (mod)->name, ##__VA_ARGS__)
+#define mod_debug(mod, fmt, ...)					\
+	pr_debug("module %s: " fmt, (mod)->name, ##__VA_ARGS__)
+
+/* Transfer the section to the L1 memory */
+int
+module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+			  char *secstrings, struct module *mod)
+{
+	/*
+	 * XXX: sechdrs are vmalloced in kernel/module.c
+	 * and would be vfreed just after module is loaded,
+	 * so we hack to keep the only information we needed
+	 * in mod->arch to correctly free L1 I/D sram later.
+	 * NOTE: this breaks the semantic of mod->arch structure.
+	 */
+	Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
+	void *dest;
+
+	for (s = sechdrs; s < sechdrs_end; ++s) {
+		const char *shname = secstrings + s->sh_name;
+
+		if (s->sh_size == 0)
+			continue;
+
+		if (!strcmp(".l1.text", shname) ||
+		    (!strcmp(".text", shname) &&
+		     (hdr->e_flags & EF_BFIN_CODE_IN_L1))) {
+
+			dest = l1_inst_sram_alloc(s->sh_size);
+			mod->arch.text_l1 = dest;
+			if (dest == NULL) {
+				mod_err(mod, "L1 inst memory allocation failed\n");
+				return -1;
+			}
+			dma_memcpy(dest, (void *)s->sh_addr, s->sh_size);
+
+		} else if (!strcmp(".l1.data", shname) ||
+		           (!strcmp(".data", shname) &&
+		            (hdr->e_flags & EF_BFIN_DATA_IN_L1))) {
+
+			dest = l1_data_sram_alloc(s->sh_size);
+			mod->arch.data_a_l1 = dest;
+			if (dest == NULL) {
+				mod_err(mod, "L1 data memory allocation failed\n");
+				return -1;
+			}
+			memcpy(dest, (void *)s->sh_addr, s->sh_size);
+
+		} else if (!strcmp(".l1.bss", shname) ||
+		           (!strcmp(".bss", shname) &&
+		            (hdr->e_flags & EF_BFIN_DATA_IN_L1))) {
+
+			dest = l1_data_sram_zalloc(s->sh_size);
+			mod->arch.bss_a_l1 = dest;
+			if (dest == NULL) {
+				mod_err(mod, "L1 data memory allocation failed\n");
+				return -1;
+			}
+
+		} else if (!strcmp(".l1.data.B", shname)) {
+
+			dest = l1_data_B_sram_alloc(s->sh_size);
+			mod->arch.data_b_l1 = dest;
+			if (dest == NULL) {
+				mod_err(mod, "L1 data memory allocation failed\n");
+				return -1;
+			}
+			memcpy(dest, (void *)s->sh_addr, s->sh_size);
+
+		} else if (!strcmp(".l1.bss.B", shname)) {
+
+			dest = l1_data_B_sram_alloc(s->sh_size);
+			mod->arch.bss_b_l1 = dest;
+			if (dest == NULL) {
+				mod_err(mod, "L1 data memory allocation failed\n");
+				return -1;
+			}
+			memset(dest, 0, s->sh_size);
+
+		} else if (!strcmp(".l2.text", shname) ||
+		           (!strcmp(".text", shname) &&
+		            (hdr->e_flags & EF_BFIN_CODE_IN_L2))) {
+
+			dest = l2_sram_alloc(s->sh_size);
+			mod->arch.text_l2 = dest;
+			if (dest == NULL) {
+				mod_err(mod, "L2 SRAM allocation failed\n");
+				return -1;
+			}
+			memcpy(dest, (void *)s->sh_addr, s->sh_size);
+
+		} else if (!strcmp(".l2.data", shname) ||
+		           (!strcmp(".data", shname) &&
+		            (hdr->e_flags & EF_BFIN_DATA_IN_L2))) {
+
+			dest = l2_sram_alloc(s->sh_size);
+			mod->arch.data_l2 = dest;
+			if (dest == NULL) {
+				mod_err(mod, "L2 SRAM allocation failed\n");
+				return -1;
+			}
+			memcpy(dest, (void *)s->sh_addr, s->sh_size);
+
+		} else if (!strcmp(".l2.bss", shname) ||
+		           (!strcmp(".bss", shname) &&
+		            (hdr->e_flags & EF_BFIN_DATA_IN_L2))) {
+
+			dest = l2_sram_zalloc(s->sh_size);
+			mod->arch.bss_l2 = dest;
+			if (dest == NULL) {
+				mod_err(mod, "L2 SRAM allocation failed\n");
+				return -1;
+			}
+
+		} else
+			continue;
+
+		s->sh_flags &= ~SHF_ALLOC;
+		s->sh_addr = (unsigned long)dest;
+	}
+
+	return 0;
+}
+
+/*************************************************************************/
+/* FUNCTION : apply_relocate_add                                         */
+/* ABSTRACT : Blackfin specific relocation handling for the loadable     */
+/*            modules. Modules are expected to be .o files.              */
+/*            Arithmetic relocations are handled.                        */
+/*            We do not expect LSETUP to be split and hence is not       */
+/*            handled.                                                   */
+/*            R_BFIN_BYTE and R_BFIN_BYTE2 are also not handled as the   */
+/*            gas does not generate it.                                  */
+/*************************************************************************/
+int
+apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
+		   unsigned int symindex, unsigned int relsec,
+		   struct module *mod)
+{
+	unsigned int i;
+	Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+	Elf32_Sym *sym;
+	unsigned long location, value, size;
+
+	mod_debug(mod, "applying relocate section %u to %u\n",
+		  relsec, sechdrs[relsec].sh_info);
+
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* This is where to make the change */
+		location = sechdrs[sechdrs[relsec].sh_info].sh_addr +
+		           rel[i].r_offset;
+
+		/* This is the symbol it is referring to. Note that all
+		   undefined symbols have been resolved. */
+		sym = (Elf32_Sym *) sechdrs[symindex].sh_addr
+		    + ELF32_R_SYM(rel[i].r_info);
+		value = sym->st_value;
+		value += rel[i].r_addend;
+
+#ifdef CONFIG_SMP
+		if (location >= COREB_L1_DATA_A_START) {
+			mod_err(mod, "cannot relocate in L1: %u (SMP kernel)\n",
+				ELF32_R_TYPE(rel[i].r_info));
+			return -ENOEXEC;
+		}
+#endif
+
+		mod_debug(mod, "location is %lx, value is %lx type is %d\n",
+			  location, value, ELF32_R_TYPE(rel[i].r_info));
+
+		switch (ELF32_R_TYPE(rel[i].r_info)) {
+
+		case R_BFIN_HUIMM16:
+			value >>= 16;
+		case R_BFIN_LUIMM16:
+		case R_BFIN_RIMM16:
+			size = 2;
+			break;
+		case R_BFIN_BYTE4_DATA:
+			size = 4;
+			break;
+
+		case R_BFIN_PCREL24:
+		case R_BFIN_PCREL24_JUMP_L:
+		case R_BFIN_PCREL12_JUMP:
+		case R_BFIN_PCREL12_JUMP_S:
+		case R_BFIN_PCREL10:
+			mod_err(mod, "unsupported relocation: %u (no -mlong-calls?)\n",
+				ELF32_R_TYPE(rel[i].r_info));
+			return -ENOEXEC;
+
+		default:
+			mod_err(mod, "unknown relocation: %u\n",
+				ELF32_R_TYPE(rel[i].r_info));
+			return -ENOEXEC;
+		}
+
+		switch (bfin_mem_access_type(location, size)) {
+		case BFIN_MEM_ACCESS_CORE:
+		case BFIN_MEM_ACCESS_CORE_ONLY:
+			memcpy((void *)location, &value, size);
+			break;
+		case BFIN_MEM_ACCESS_DMA:
+			dma_memcpy((void *)location, &value, size);
+			break;
+		case BFIN_MEM_ACCESS_ITEST:
+			isram_memcpy((void *)location, &value, size);
+			break;
+		default:
+			mod_err(mod, "invalid relocation for %#lx\n", location);
+			return -ENOEXEC;
+		}
+	}
+
+	return 0;
+}
+
+int
+module_finalize(const Elf_Ehdr * hdr,
+		const Elf_Shdr * sechdrs, struct module *mod)
+{
+	unsigned int i, strindex = 0, symindex = 0;
+	char *secstrings;
+	long err = 0;
+
+	secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+	for (i = 1; i < hdr->e_shnum; i++) {
+		/* Internal symbols and strings. */
+		if (sechdrs[i].sh_type == SHT_SYMTAB) {
+			symindex = i;
+			strindex = sechdrs[i].sh_link;
+		}
+	}
+
+	for (i = 1; i < hdr->e_shnum; i++) {
+		const char *strtab = (char *)sechdrs[strindex].sh_addr;
+		unsigned int info = sechdrs[i].sh_info;
+		const char *shname = secstrings + sechdrs[i].sh_name;
+
+		/* Not a valid relocation section? */
+		if (info >= hdr->e_shnum)
+			continue;
+
+		/* Only support RELA relocation types */
+		if (sechdrs[i].sh_type != SHT_RELA)
+			continue;
+
+		if (!strcmp(".rela.l2.text", shname) ||
+		    !strcmp(".rela.l1.text", shname) ||
+		    (!strcmp(".rela.text", shname) &&
+			 (hdr->e_flags & (EF_BFIN_CODE_IN_L1 | EF_BFIN_CODE_IN_L2)))) {
+
+			err = apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
+					   symindex, i, mod);
+			if (err < 0)
+				return -ENOEXEC;
+		}
+	}
+
+	return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+	l1_inst_sram_free(mod->arch.text_l1);
+	l1_data_A_sram_free(mod->arch.data_a_l1);
+	l1_data_A_sram_free(mod->arch.bss_a_l1);
+	l1_data_B_sram_free(mod->arch.data_b_l1);
+	l1_data_B_sram_free(mod->arch.bss_b_l1);
+	l2_sram_free(mod->arch.text_l2);
+	l2_sram_free(mod->arch.data_l2);
+	l2_sram_free(mod->arch.bss_l2);
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/nmi.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/nmi.c
new file mode 100644
index 0000000..1e71432
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/nmi.c
@@ -0,0 +1,288 @@
+/*
+ * Blackfin nmi_watchdog Driver
+ *
+ * Originally based on bfin_wdt.c
+ * Copyright 2010-2010 Analog Devices Inc.
+ *		Graff Yang <graf.yang@analog.com>
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/bitops.h>
+#include <linux/hardirq.h>
+#include <linux/syscore_ops.h>
+#include <linux/pm.h>
+#include <linux/nmi.h>
+#include <linux/smp.h>
+#include <linux/timer.h>
+#include <linux/sched/debug.h>
+#include <asm/blackfin.h>
+#include <linux/atomic.h>
+#include <asm/cacheflush.h>
+#include <asm/bfin_watchdog.h>
+
+#define DRV_NAME "nmi-wdt"
+
+#define NMI_WDT_TIMEOUT 5          /* 5 seconds */
+#define NMI_CHECK_TIMEOUT (4 * HZ) /* 4 seconds in jiffies */
+static int nmi_wdt_cpu = 1;
+
+static unsigned int timeout = NMI_WDT_TIMEOUT;
+static int nmi_active;
+
+static unsigned short wdoga_ctl;
+static unsigned int wdoga_cnt;
+static struct corelock_slot saved_corelock;
+static atomic_t nmi_touched[NR_CPUS];
+static struct timer_list ntimer;
+
+enum {
+	COREA_ENTER_NMI = 0,
+	COREA_EXIT_NMI,
+	COREB_EXIT_NMI,
+
+	NMI_EVENT_NR,
+};
+static unsigned long nmi_event __attribute__ ((__section__(".l2.bss")));
+
+/* we are in nmi, non-atomic bit ops is safe */
+static inline void set_nmi_event(int event)
+{
+	__set_bit(event, &nmi_event);
+}
+
+static inline void wait_nmi_event(int event)
+{
+	while (!test_bit(event, &nmi_event))
+		barrier();
+	__clear_bit(event, &nmi_event);
+}
+
+static inline void send_corea_nmi(void)
+{
+	wdoga_ctl = bfin_read_WDOGA_CTL();
+	wdoga_cnt = bfin_read_WDOGA_CNT();
+
+	bfin_write_WDOGA_CTL(WDEN_DISABLE);
+	bfin_write_WDOGA_CNT(0);
+	bfin_write_WDOGA_CTL(WDEN_ENABLE | ICTL_NMI);
+}
+
+static inline void restore_corea_nmi(void)
+{
+	bfin_write_WDOGA_CTL(WDEN_DISABLE);
+	bfin_write_WDOGA_CTL(WDOG_EXPIRED | WDEN_DISABLE | ICTL_NONE);
+
+	bfin_write_WDOGA_CNT(wdoga_cnt);
+	bfin_write_WDOGA_CTL(wdoga_ctl);
+}
+
+static inline void save_corelock(void)
+{
+	saved_corelock = corelock;
+	corelock.lock = 0;
+}
+
+static inline void restore_corelock(void)
+{
+	corelock = saved_corelock;
+}
+
+
+static inline void nmi_wdt_keepalive(void)
+{
+	bfin_write_WDOGB_STAT(0);
+}
+
+static inline void nmi_wdt_stop(void)
+{
+	bfin_write_WDOGB_CTL(WDEN_DISABLE);
+}
+
+/* before calling this function, you must stop the WDT */
+static inline void nmi_wdt_clear(void)
+{
+	/* clear TRO bit, disable event generation */
+	bfin_write_WDOGB_CTL(WDOG_EXPIRED | WDEN_DISABLE | ICTL_NONE);
+}
+
+static inline void nmi_wdt_start(void)
+{
+	bfin_write_WDOGB_CTL(WDEN_ENABLE | ICTL_NMI);
+}
+
+static inline int nmi_wdt_running(void)
+{
+	return ((bfin_read_WDOGB_CTL() & WDEN_MASK) != WDEN_DISABLE);
+}
+
+static inline int nmi_wdt_set_timeout(unsigned long t)
+{
+	u32 cnt, max_t, sclk;
+	int run;
+
+	sclk = get_sclk();
+	max_t = -1 / sclk;
+	cnt = t * sclk;
+	if (t > max_t) {
+		pr_warning("NMI: timeout value is too large\n");
+		return -EINVAL;
+	}
+
+	run = nmi_wdt_running();
+	nmi_wdt_stop();
+	bfin_write_WDOGB_CNT(cnt);
+	if (run)
+		nmi_wdt_start();
+
+	timeout = t;
+
+	return 0;
+}
+
+int check_nmi_wdt_touched(void)
+{
+	unsigned int this_cpu = smp_processor_id();
+	unsigned int cpu;
+	cpumask_t mask;
+
+	cpumask_copy(&mask, cpu_online_mask);
+	if (!atomic_read(&nmi_touched[this_cpu]))
+		return 0;
+
+	atomic_set(&nmi_touched[this_cpu], 0);
+
+	cpumask_clear_cpu(this_cpu, &mask);
+	for_each_cpu(cpu, &mask) {
+		invalidate_dcache_range((unsigned long)(&nmi_touched[cpu]),
+				(unsigned long)(&nmi_touched[cpu]));
+		if (!atomic_read(&nmi_touched[cpu]))
+			return 0;
+		atomic_set(&nmi_touched[cpu], 0);
+	}
+
+	return 1;
+}
+
+static void nmi_wdt_timer(unsigned long data)
+{
+	if (check_nmi_wdt_touched())
+		nmi_wdt_keepalive();
+
+	mod_timer(&ntimer, jiffies + NMI_CHECK_TIMEOUT);
+}
+
+static int __init init_nmi_wdt(void)
+{
+	nmi_wdt_set_timeout(timeout);
+	nmi_wdt_start();
+	nmi_active = true;
+
+	init_timer(&ntimer);
+	ntimer.function = nmi_wdt_timer;
+	ntimer.expires = jiffies + NMI_CHECK_TIMEOUT;
+	add_timer(&ntimer);
+
+	pr_info("nmi_wdt: initialized: timeout=%d sec\n", timeout);
+	return 0;
+}
+device_initcall(init_nmi_wdt);
+
+void arch_touch_nmi_watchdog(void)
+{
+	atomic_set(&nmi_touched[smp_processor_id()], 1);
+}
+
+/* Suspend/resume support */
+#ifdef CONFIG_PM
+static int nmi_wdt_suspend(void)
+{
+	nmi_wdt_stop();
+	return 0;
+}
+
+static void nmi_wdt_resume(void)
+{
+	if (nmi_active)
+		nmi_wdt_start();
+}
+
+static struct syscore_ops nmi_syscore_ops = {
+	.resume		= nmi_wdt_resume,
+	.suspend	= nmi_wdt_suspend,
+};
+
+static int __init init_nmi_wdt_syscore(void)
+{
+	if (nmi_active)
+		register_syscore_ops(&nmi_syscore_ops);
+
+	return 0;
+}
+late_initcall(init_nmi_wdt_syscore);
+
+#endif	/* CONFIG_PM */
+
+
+asmlinkage notrace void do_nmi(struct pt_regs *fp)
+{
+	unsigned int cpu = smp_processor_id();
+	nmi_enter();
+
+	cpu_pda[cpu].__nmi_count += 1;
+
+	if (cpu == nmi_wdt_cpu) {
+		/* CoreB goes here first */
+
+		/* reload the WDOG_STAT */
+		nmi_wdt_keepalive();
+
+		/* clear nmi interrupt for CoreB */
+		nmi_wdt_stop();
+		nmi_wdt_clear();
+
+		/* trigger NMI interrupt of CoreA */
+		send_corea_nmi();
+
+		/* waiting CoreB to enter NMI */
+		wait_nmi_event(COREA_ENTER_NMI);
+
+		/* recover WDOGA's settings */
+		restore_corea_nmi();
+
+		save_corelock();
+
+		/* corelock is save/cleared, CoreA is dummping messages */
+
+		wait_nmi_event(COREA_EXIT_NMI);
+	} else {
+		/* OK, CoreA entered NMI */
+		set_nmi_event(COREA_ENTER_NMI);
+	}
+
+	pr_emerg("\nNMI Watchdog detected LOCKUP, dump for CPU %d\n", cpu);
+	dump_bfin_process(fp);
+	dump_bfin_mem(fp);
+	show_regs(fp);
+	dump_bfin_trace_buffer();
+	show_stack(current, (unsigned long *)fp);
+
+	if (cpu == nmi_wdt_cpu) {
+		pr_emerg("This fault is not recoverable, sorry!\n");
+
+		/* CoreA dump finished, restore the corelock */
+		restore_corelock();
+
+		set_nmi_event(COREB_EXIT_NMI);
+	} else {
+		/* CoreB dump finished, notice the CoreA we are done */
+		set_nmi_event(COREA_EXIT_NMI);
+
+		/* synchronize with CoreA */
+		wait_nmi_event(COREB_EXIT_NMI);
+	}
+
+	nmi_exit();
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/perf_event.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/perf_event.c
new file mode 100644
index 0000000..6a9524a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/perf_event.c
@@ -0,0 +1,482 @@
+/*
+ * Blackfin performance counters
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Ripped from SuperH version:
+ *
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ * Heavily based on the x86 and PowerPC implementations.
+ *
+ * x86:
+ *  Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
+ *  Copyright (C) 2009 Jaswinder Singh Rajput
+ *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra
+ *  Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
+ *
+ * ppc:
+ *  Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/perf_event.h>
+#include <asm/bfin_pfmon.h>
+
+/*
+ * We have two counters, and each counter can support an event type.
+ * The 'o' is PFCNTx=1 and 's' is PFCNTx=0
+ *
+ * 0x04 o pc invariant branches
+ * 0x06 o mispredicted branches
+ * 0x09 o predicted branches taken
+ * 0x0B o EXCPT insn
+ * 0x0C o CSYNC/SSYNC insn
+ * 0x0D o Insns committed
+ * 0x0E o Interrupts taken
+ * 0x0F o Misaligned address exceptions
+ * 0x80 o Code memory fetches stalled due to DMA
+ * 0x83 o 64bit insn fetches delivered
+ * 0x9A o data cache fills (bank a)
+ * 0x9B o data cache fills (bank b)
+ * 0x9C o data cache lines evicted (bank a)
+ * 0x9D o data cache lines evicted (bank b)
+ * 0x9E o data cache high priority fills
+ * 0x9F o data cache low priority fills
+ * 0x00 s loop 0 iterations
+ * 0x01 s loop 1 iterations
+ * 0x0A s CSYNC/SSYNC stalls
+ * 0x10 s DAG read/after write hazards
+ * 0x13 s RAW data hazards
+ * 0x81 s code TAG stalls
+ * 0x82 s code fill stalls
+ * 0x90 s processor to memory stalls
+ * 0x91 s data memory stalls not hidden by 0x90
+ * 0x92 s data store buffer full stalls
+ * 0x93 s data memory write buffer full stalls due to high->low priority
+ * 0x95 s data memory fill buffer stalls
+ * 0x96 s data TAG collision stalls
+ * 0x97 s data collision stalls
+ * 0x98 s data stalls
+ * 0x99 s data stalls sent to processor
+ */
+
+static const int event_map[] = {
+	/* use CYCLES cpu register */
+	[PERF_COUNT_HW_CPU_CYCLES]          = -1,
+	[PERF_COUNT_HW_INSTRUCTIONS]        = 0x0D,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = -1,
+	[PERF_COUNT_HW_CACHE_MISSES]        = 0x83,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x09,
+	[PERF_COUNT_HW_BRANCH_MISSES]       = 0x06,
+	[PERF_COUNT_HW_BUS_CYCLES]          = -1,
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+static const int cache_events[PERF_COUNT_HW_CACHE_MAX]
+                             [PERF_COUNT_HW_CACHE_OP_MAX]
+                             [PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+	[C(L1D)] = {	/* Data bank A */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = 0,
+			[C(RESULT_MISS)  ] = 0x9A,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = 0,
+			[C(RESULT_MISS)  ] = 0,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = 0,
+			[C(RESULT_MISS)  ] = 0,
+		},
+	},
+
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = 0,
+			[C(RESULT_MISS)  ] = 0x83,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = -1,
+			[C(RESULT_MISS)  ] = -1,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = 0,
+			[C(RESULT_MISS)  ] = 0,
+		},
+	},
+
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = -1,
+			[C(RESULT_MISS)  ] = -1,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = -1,
+			[C(RESULT_MISS)  ] = -1,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = -1,
+			[C(RESULT_MISS)  ] = -1,
+		},
+	},
+
+	[C(DTLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = -1,
+			[C(RESULT_MISS)  ] = -1,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = -1,
+			[C(RESULT_MISS)  ] = -1,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = -1,
+			[C(RESULT_MISS)  ] = -1,
+		},
+	},
+
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = -1,
+			[C(RESULT_MISS)  ] = -1,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = -1,
+			[C(RESULT_MISS)  ] = -1,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = -1,
+			[C(RESULT_MISS)  ] = -1,
+		},
+	},
+
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = -1,
+			[C(RESULT_MISS)  ] = -1,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = -1,
+			[C(RESULT_MISS)  ] = -1,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = -1,
+			[C(RESULT_MISS)  ] = -1,
+		},
+	},
+};
+
+const char *perf_pmu_name(void)
+{
+	return "bfin";
+}
+EXPORT_SYMBOL(perf_pmu_name);
+
+int perf_num_counters(void)
+{
+	return ARRAY_SIZE(event_map);
+}
+EXPORT_SYMBOL(perf_num_counters);
+
+static u64 bfin_pfmon_read(int idx)
+{
+	return bfin_read32(PFCNTR0 + (idx * 4));
+}
+
+static void bfin_pfmon_disable(struct hw_perf_event *hwc, int idx)
+{
+	bfin_write_PFCTL(bfin_read_PFCTL() & ~PFCEN(idx, PFCEN_MASK));
+}
+
+static void bfin_pfmon_enable(struct hw_perf_event *hwc, int idx)
+{
+	u32 val, mask;
+
+	val = PFPWR;
+	if (idx) {
+		mask = ~(PFCNT1 | PFMON1 | PFCEN1 | PEMUSW1);
+		/* The packed config is for event0, so shift it to event1 slots */
+		val |= (hwc->config << (PFMON1_P - PFMON0_P));
+		val |= (hwc->config & PFCNT0) << (PFCNT1_P - PFCNT0_P);
+		bfin_write_PFCNTR1(0);
+	} else {
+		mask = ~(PFCNT0 | PFMON0 | PFCEN0 | PEMUSW0);
+		val |= hwc->config;
+		bfin_write_PFCNTR0(0);
+	}
+
+	bfin_write_PFCTL((bfin_read_PFCTL() & mask) | val);
+}
+
+static void bfin_pfmon_disable_all(void)
+{
+	bfin_write_PFCTL(bfin_read_PFCTL() & ~PFPWR);
+}
+
+static void bfin_pfmon_enable_all(void)
+{
+	bfin_write_PFCTL(bfin_read_PFCTL() | PFPWR);
+}
+
+struct cpu_hw_events {
+	struct perf_event *events[MAX_HWEVENTS];
+	unsigned long used_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
+};
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+
+static int hw_perf_cache_event(int config, int *evp)
+{
+	unsigned long type, op, result;
+	int ev;
+
+	/* unpack config */
+	type = config & 0xff;
+	op = (config >> 8) & 0xff;
+	result = (config >> 16) & 0xff;
+
+	if (type >= PERF_COUNT_HW_CACHE_MAX ||
+	    op >= PERF_COUNT_HW_CACHE_OP_MAX ||
+	    result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return -EINVAL;
+
+	ev = cache_events[type][op][result];
+	if (ev == 0)
+		return -EOPNOTSUPP;
+	if (ev == -1)
+		return -EINVAL;
+	*evp = ev;
+	return 0;
+}
+
+static void bfin_perf_event_update(struct perf_event *event,
+				   struct hw_perf_event *hwc, int idx)
+{
+	u64 prev_raw_count, new_raw_count;
+	s64 delta;
+	int shift = 0;
+
+	/*
+	 * Depending on the counter configuration, they may or may not
+	 * be chained, in which case the previous counter value can be
+	 * updated underneath us if the lower-half overflows.
+	 *
+	 * Our tactic to handle this is to first atomically read and
+	 * exchange a new raw count - then add that new-prev delta
+	 * count to the generic counter atomically.
+	 *
+	 * As there is no interrupt associated with the overflow events,
+	 * this is the simplest approach for maintaining consistency.
+	 */
+again:
+	prev_raw_count = local64_read(&hwc->prev_count);
+	new_raw_count = bfin_pfmon_read(idx);
+
+	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+			     new_raw_count) != prev_raw_count)
+		goto again;
+
+	/*
+	 * Now we have the new raw value and have updated the prev
+	 * timestamp already. We can now calculate the elapsed delta
+	 * (counter-)time and add that to the generic counter.
+	 *
+	 * Careful, not all hw sign-extends above the physical width
+	 * of the count.
+	 */
+	delta = (new_raw_count << shift) - (prev_raw_count << shift);
+	delta >>= shift;
+
+	local64_add(delta, &event->count);
+}
+
+static void bfin_pmu_stop(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	if (!(event->hw.state & PERF_HES_STOPPED)) {
+		bfin_pfmon_disable(hwc, idx);
+		cpuc->events[idx] = NULL;
+		event->hw.state |= PERF_HES_STOPPED;
+	}
+
+	if ((flags & PERF_EF_UPDATE) && !(event->hw.state & PERF_HES_UPTODATE)) {
+		bfin_perf_event_update(event, &event->hw, idx);
+		event->hw.state |= PERF_HES_UPTODATE;
+	}
+}
+
+static void bfin_pmu_start(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	if (WARN_ON_ONCE(idx == -1))
+		return;
+
+	if (flags & PERF_EF_RELOAD)
+		WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
+
+	cpuc->events[idx] = event;
+	event->hw.state = 0;
+	bfin_pfmon_enable(hwc, idx);
+}
+
+static void bfin_pmu_del(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	bfin_pmu_stop(event, PERF_EF_UPDATE);
+	__clear_bit(event->hw.idx, cpuc->used_mask);
+
+	perf_event_update_userpage(event);
+}
+
+static int bfin_pmu_add(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+	int ret = -EAGAIN;
+
+	perf_pmu_disable(event->pmu);
+
+	if (__test_and_set_bit(idx, cpuc->used_mask)) {
+		idx = find_first_zero_bit(cpuc->used_mask, MAX_HWEVENTS);
+		if (idx == MAX_HWEVENTS)
+			goto out;
+
+		__set_bit(idx, cpuc->used_mask);
+		hwc->idx = idx;
+	}
+
+	bfin_pfmon_disable(hwc, idx);
+
+	event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
+	if (flags & PERF_EF_START)
+		bfin_pmu_start(event, PERF_EF_RELOAD);
+
+	perf_event_update_userpage(event);
+	ret = 0;
+out:
+	perf_pmu_enable(event->pmu);
+	return ret;
+}
+
+static void bfin_pmu_read(struct perf_event *event)
+{
+	bfin_perf_event_update(event, &event->hw, event->hw.idx);
+}
+
+static int bfin_pmu_event_init(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+	struct hw_perf_event *hwc = &event->hw;
+	int config = -1;
+	int ret;
+
+	if (attr->exclude_hv || attr->exclude_idle)
+		return -EPERM;
+
+	ret = 0;
+	switch (attr->type) {
+	case PERF_TYPE_RAW:
+		config = PFMON(0, attr->config & PFMON_MASK) |
+			PFCNT(0, !(attr->config & 0x100));
+		break;
+	case PERF_TYPE_HW_CACHE:
+		ret = hw_perf_cache_event(attr->config, &config);
+		break;
+	case PERF_TYPE_HARDWARE:
+		if (attr->config >= ARRAY_SIZE(event_map))
+			return -EINVAL;
+
+		config = event_map[attr->config];
+		break;
+	}
+
+	if (config == -1)
+		return -EINVAL;
+
+	if (!attr->exclude_kernel)
+		config |= PFCEN(0, PFCEN_ENABLE_SUPV);
+	if (!attr->exclude_user)
+		config |= PFCEN(0, PFCEN_ENABLE_USER);
+
+	hwc->config |= config;
+
+	return ret;
+}
+
+static void bfin_pmu_enable(struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct perf_event *event;
+	struct hw_perf_event *hwc;
+	int i;
+
+	for (i = 0; i < MAX_HWEVENTS; ++i) {
+		event = cpuc->events[i];
+		if (!event)
+			continue;
+		hwc = &event->hw;
+		bfin_pfmon_enable(hwc, hwc->idx);
+	}
+
+	bfin_pfmon_enable_all();
+}
+
+static void bfin_pmu_disable(struct pmu *pmu)
+{
+	bfin_pfmon_disable_all();
+}
+
+static struct pmu pmu = {
+	.pmu_enable  = bfin_pmu_enable,
+	.pmu_disable = bfin_pmu_disable,
+	.event_init  = bfin_pmu_event_init,
+	.add         = bfin_pmu_add,
+	.del         = bfin_pmu_del,
+	.start       = bfin_pmu_start,
+	.stop        = bfin_pmu_stop,
+	.read        = bfin_pmu_read,
+};
+
+static int bfin_pmu_prepare_cpu(unsigned int cpu)
+{
+	struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
+
+	bfin_write_PFCTL(0);
+	memset(cpuhw, 0, sizeof(struct cpu_hw_events));
+	return 0;
+}
+
+static int __init bfin_pmu_init(void)
+{
+	int ret;
+
+	/*
+	 * All of the on-chip counters are "limited", in that they have
+	 * no interrupts, and are therefore unable to do sampling without
+	 * further work and timer assistance.
+	 */
+	pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
+
+	ret = perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
+	if (!ret)
+		cpuhp_setup_state(CPUHP_PERF_BFIN,"perf/bfin:starting",
+				  bfin_pmu_prepare_cpu, NULL);
+	return ret;
+}
+early_initcall(bfin_pmu_init);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/process.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/process.c
new file mode 100644
index 0000000..8981485
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/process.c
@@ -0,0 +1,438 @@
+/*
+ * Blackfin architecture-dependent process handling
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/module.h>
+#include <linux/unistd.h>
+#include <linux/user.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task.h>
+#include <linux/sched/task_stack.h>
+#include <linux/mm_types.h>
+#include <linux/tick.h>
+#include <linux/fs.h>
+#include <linux/err.h>
+
+#include <asm/blackfin.h>
+#include <asm/fixed_code.h>
+#include <asm/mem_map.h>
+#include <asm/irq.h>
+
+asmlinkage void ret_from_fork(void);
+
+/* Points to the SDRAM backup memory for the stack that is currently in
+ * L1 scratchpad memory.
+ */
+void *current_l1_stack_save;
+
+/* The number of tasks currently using a L1 stack area.  The SRAM is
+ * allocated/deallocated whenever this changes from/to zero.
+ */
+int nr_l1stack_tasks;
+
+/* Start and length of the area in L1 scratchpad memory which we've allocated
+ * for process stacks.
+ */
+void *l1_stack_base;
+unsigned long l1_stack_len;
+
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
+/*
+ * The idle loop on BFIN
+ */
+#ifdef CONFIG_IDLE_L1
+void arch_cpu_idle(void)__attribute__((l1_text));
+#endif
+
+/*
+ * This is our default idle handler.  We need to disable
+ * interrupts here to ensure we don't miss a wakeup call.
+ */
+void arch_cpu_idle(void)
+{
+#ifdef CONFIG_IPIPE
+	ipipe_suspend_domain();
+#endif
+	hard_local_irq_disable();
+	if (!need_resched())
+		idle_with_irq_disabled();
+
+	hard_local_irq_enable();
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+void arch_cpu_idle_dead(void)
+{
+	cpu_die();
+}
+#endif
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+void start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
+{
+	regs->pc = new_ip;
+	if (current->mm)
+		regs->p5 = current->mm->start_data;
+#ifndef CONFIG_SMP
+	task_thread_info(current)->l1_task_info.stack_start =
+		(void *)current->mm->context.stack_start;
+	task_thread_info(current)->l1_task_info.lowest_sp = (void *)new_sp;
+	memcpy(L1_SCRATCH_TASK_INFO, &task_thread_info(current)->l1_task_info,
+	       sizeof(*L1_SCRATCH_TASK_INFO));
+#endif
+	wrusp(new_sp);
+}
+EXPORT_SYMBOL_GPL(start_thread);
+
+void flush_thread(void)
+{
+}
+
+asmlinkage int bfin_clone(unsigned long clone_flags, unsigned long newsp)
+{
+#ifdef __ARCH_SYNC_CORE_DCACHE
+	if (current->nr_cpus_allowed == num_possible_cpus())
+		set_cpus_allowed_ptr(current, cpumask_of(smp_processor_id()));
+#endif
+	if (newsp)
+		newsp -= 12;
+	return do_fork(clone_flags, newsp, 0, NULL, NULL);
+}
+
+int
+copy_thread(unsigned long clone_flags,
+	    unsigned long usp, unsigned long topstk,
+	    struct task_struct *p)
+{
+	struct pt_regs *childregs;
+	unsigned long *v;
+
+	childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1;
+	v = ((unsigned long *)childregs) - 2;
+	if (unlikely(p->flags & PF_KTHREAD)) {
+		memset(childregs, 0, sizeof(struct pt_regs));
+		v[0] = usp;
+		v[1] = topstk;
+		childregs->orig_p0 = -1;
+		childregs->ipend = 0x8000;
+		__asm__ __volatile__("%0 = syscfg;":"=da"(childregs->syscfg):);
+		p->thread.usp = 0;
+	} else {
+		*childregs = *current_pt_regs();
+		childregs->r0 = 0;
+		p->thread.usp = usp ? : rdusp();
+		v[0] = v[1] = 0;
+	}
+
+	p->thread.ksp = (unsigned long)v;
+	p->thread.pc = (unsigned long)ret_from_fork;
+
+	return 0;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+	unsigned long fp, pc;
+	unsigned long stack_page;
+	int count = 0;
+	if (!p || p == current || p->state == TASK_RUNNING)
+		return 0;
+
+	stack_page = (unsigned long)p;
+	fp = p->thread.usp;
+	do {
+		if (fp < stack_page + sizeof(struct thread_info) ||
+		    fp >= 8184 + stack_page)
+			return 0;
+		pc = ((unsigned long *)fp)[1];
+		if (!in_sched_functions(pc))
+			return pc;
+		fp = *(unsigned long *)fp;
+	}
+	while (count++ < 16);
+	return 0;
+}
+
+void finish_atomic_sections (struct pt_regs *regs)
+{
+	int __user *up0 = (int __user *)regs->p0;
+
+	switch (regs->pc) {
+	default:
+		/* not in middle of an atomic step, so resume like normal */
+		return;
+
+	case ATOMIC_XCHG32 + 2:
+		put_user(regs->r1, up0);
+		break;
+
+	case ATOMIC_CAS32 + 2:
+	case ATOMIC_CAS32 + 4:
+		if (regs->r0 == regs->r1)
+	case ATOMIC_CAS32 + 6:
+			put_user(regs->r2, up0);
+		break;
+
+	case ATOMIC_ADD32 + 2:
+		regs->r0 = regs->r1 + regs->r0;
+		/* fall through */
+	case ATOMIC_ADD32 + 4:
+		put_user(regs->r0, up0);
+		break;
+
+	case ATOMIC_SUB32 + 2:
+		regs->r0 = regs->r1 - regs->r0;
+		/* fall through */
+	case ATOMIC_SUB32 + 4:
+		put_user(regs->r0, up0);
+		break;
+
+	case ATOMIC_IOR32 + 2:
+		regs->r0 = regs->r1 | regs->r0;
+		/* fall through */
+	case ATOMIC_IOR32 + 4:
+		put_user(regs->r0, up0);
+		break;
+
+	case ATOMIC_AND32 + 2:
+		regs->r0 = regs->r1 & regs->r0;
+		/* fall through */
+	case ATOMIC_AND32 + 4:
+		put_user(regs->r0, up0);
+		break;
+
+	case ATOMIC_XOR32 + 2:
+		regs->r0 = regs->r1 ^ regs->r0;
+		/* fall through */
+	case ATOMIC_XOR32 + 4:
+		put_user(regs->r0, up0);
+		break;
+	}
+
+	/*
+	 * We've finished the atomic section, and the only thing left for
+	 * userspace is to do a RTS, so we might as well handle that too
+	 * since we need to update the PC anyways.
+	 */
+	regs->pc = regs->rets;
+}
+
+static inline
+int in_mem(unsigned long addr, unsigned long size,
+           unsigned long start, unsigned long end)
+{
+	return addr >= start && addr + size <= end;
+}
+static inline
+int in_mem_const_off(unsigned long addr, unsigned long size, unsigned long off,
+                     unsigned long const_addr, unsigned long const_size)
+{
+	return const_size &&
+	       in_mem(addr, size, const_addr + off, const_addr + const_size);
+}
+static inline
+int in_mem_const(unsigned long addr, unsigned long size,
+                 unsigned long const_addr, unsigned long const_size)
+{
+	return in_mem_const_off(addr, size, 0, const_addr, const_size);
+}
+#ifdef CONFIG_BF60x
+#define ASYNC_ENABLED(bnum, bctlnum)	1
+#else
+#define ASYNC_ENABLED(bnum, bctlnum) \
+({ \
+	(bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? 0 : \
+	bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? 0 : \
+	1; \
+})
+#endif
+/*
+ * We can't read EBIU banks that aren't enabled or we end up hanging
+ * on the access to the async space.  Make sure we validate accesses
+ * that cross async banks too.
+ *	0 - found, but unusable
+ *	1 - found & usable
+ *	2 - not found
+ */
+static
+int in_async(unsigned long addr, unsigned long size)
+{
+	if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE) {
+		if (!ASYNC_ENABLED(0, 0))
+			return 0;
+		if (addr + size <= ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)
+			return 1;
+		size -= ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE - addr;
+		addr = ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE;
+	}
+	if (addr >= ASYNC_BANK1_BASE && addr < ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE) {
+		if (!ASYNC_ENABLED(1, 0))
+			return 0;
+		if (addr + size <= ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)
+			return 1;
+		size -= ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE - addr;
+		addr = ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE;
+	}
+	if (addr >= ASYNC_BANK2_BASE && addr < ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE) {
+		if (!ASYNC_ENABLED(2, 1))
+			return 0;
+		if (addr + size <= ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE)
+			return 1;
+		size -= ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE - addr;
+		addr = ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE;
+	}
+	if (addr >= ASYNC_BANK3_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
+		if (ASYNC_ENABLED(3, 1))
+			return 0;
+		if (addr + size <= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE)
+			return 1;
+		return 0;
+	}
+
+	/* not within async bounds */
+	return 2;
+}
+
+int bfin_mem_access_type(unsigned long addr, unsigned long size)
+{
+	int cpu = raw_smp_processor_id();
+
+	/* Check that things do not wrap around */
+	if (addr > ULONG_MAX - size)
+		return -EFAULT;
+
+	if (in_mem(addr, size, FIXED_CODE_START, physical_mem_end))
+		return BFIN_MEM_ACCESS_CORE;
+
+	if (in_mem_const(addr, size, L1_CODE_START, L1_CODE_LENGTH))
+		return cpu == 0 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
+	if (in_mem_const(addr, size, L1_SCRATCH_START, L1_SCRATCH_LENGTH))
+		return cpu == 0 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
+	if (in_mem_const(addr, size, L1_DATA_A_START, L1_DATA_A_LENGTH))
+		return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
+	if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
+		return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
+#ifdef COREB_L1_CODE_START
+	if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
+		return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
+	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
+		return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
+	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
+		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
+	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
+		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
+#endif
+	if (in_mem_const(addr, size, L2_START, L2_LENGTH))
+		return BFIN_MEM_ACCESS_CORE;
+
+	if (addr >= SYSMMR_BASE)
+		return BFIN_MEM_ACCESS_CORE_ONLY;
+
+	switch (in_async(addr, size)) {
+	case 0: return -EFAULT;
+	case 1: return BFIN_MEM_ACCESS_CORE;
+	case 2: /* fall through */;
+	}
+
+	if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH))
+		return BFIN_MEM_ACCESS_CORE;
+	if (in_mem_const(addr, size, L1_ROM_START, L1_ROM_LENGTH))
+		return BFIN_MEM_ACCESS_DMA;
+
+	return -EFAULT;
+}
+
+#if defined(CONFIG_ACCESS_CHECK)
+#ifdef CONFIG_ACCESS_OK_L1
+__attribute__((l1_text))
+#endif
+/* Return 1 if access to memory range is OK, 0 otherwise */
+int _access_ok(unsigned long addr, unsigned long size)
+{
+	int aret;
+
+	if (size == 0)
+		return 1;
+	/* Check that things do not wrap around */
+	if (addr > ULONG_MAX - size)
+		return 0;
+	if (uaccess_kernel())
+		return 1;
+#ifdef CONFIG_MTD_UCLINUX
+	if (1)
+#else
+	if (0)
+#endif
+	{
+		if (in_mem(addr, size, memory_start, memory_end))
+			return 1;
+		if (in_mem(addr, size, memory_mtd_end, physical_mem_end))
+			return 1;
+# ifndef CONFIG_ROMFS_ON_MTD
+		if (0)
+# endif
+			/* For XIP, allow user space to use pointers within the ROMFS.  */
+			if (in_mem(addr, size, memory_mtd_start, memory_mtd_end))
+				return 1;
+	} else {
+		if (in_mem(addr, size, memory_start, physical_mem_end))
+			return 1;
+	}
+
+	if (in_mem(addr, size, (unsigned long)__init_begin, (unsigned long)__init_end))
+		return 1;
+
+	if (in_mem_const(addr, size, L1_CODE_START, L1_CODE_LENGTH))
+		return 1;
+	if (in_mem_const_off(addr, size, _etext_l1 - _stext_l1, L1_CODE_START, L1_CODE_LENGTH))
+		return 1;
+	if (in_mem_const_off(addr, size, _ebss_l1 - _sdata_l1, L1_DATA_A_START, L1_DATA_A_LENGTH))
+		return 1;
+	if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH))
+		return 1;
+#ifdef COREB_L1_CODE_START
+	if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
+		return 1;
+	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
+		return 1;
+	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
+		return 1;
+	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
+		return 1;
+#endif
+
+#ifndef CONFIG_EXCEPTION_L1_SCRATCH
+	if (in_mem_const(addr, size, (unsigned long)l1_stack_base, l1_stack_len))
+		return 1;
+#endif
+
+	aret = in_async(addr, size);
+	if (aret < 2)
+		return aret;
+
+	if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))
+		return 1;
+
+	if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH))
+		return 1;
+	if (in_mem_const(addr, size, L1_ROM_START, L1_ROM_LENGTH))
+		return 1;
+
+	return 0;
+}
+EXPORT_SYMBOL(_access_ok);
+#endif /* CONFIG_ACCESS_CHECK */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/pseudodbg.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/pseudodbg.c
new file mode 100644
index 0000000..db85bc9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/pseudodbg.c
@@ -0,0 +1,191 @@
+/* The fake debug assert instructions
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+
+const char * const greg_names[] = {
+	"R0",    "R1",      "R2",     "R3",    "R4",    "R5",    "R6",     "R7",
+	"P0",    "P1",      "P2",     "P3",    "P4",    "P5",    "SP",     "FP",
+	"I0",    "I1",      "I2",     "I3",    "M0",    "M1",    "M2",     "M3",
+	"B0",    "B1",      "B2",     "B3",    "L0",    "L1",    "L2",     "L3",
+	"A0.X",  "A0.W",    "A1.X",   "A1.W",  "<res>", "<res>", "ASTAT",  "RETS",
+	"<res>", "<res>",   "<res>",  "<res>", "<res>", "<res>", "<res>",  "<res>",
+	"LC0",   "LT0",     "LB0",    "LC1",   "LT1",   "LB1",   "CYCLES", "CYCLES2",
+	"USP",   "SEQSTAT", "SYSCFG", "RETI",  "RETX",  "RETN",  "RETE",   "EMUDAT",
+};
+
+static const char *get_allreg_name(int grp, int reg)
+{
+	return greg_names[(grp << 3) | reg];
+}
+
+/*
+ * Unfortunately, the pt_regs structure is not laid out the same way as the
+ * hardware register file, so we need to do some fix ups.
+ *
+ * CYCLES is not stored in the pt_regs structure - so, we just read it from
+ * the hardware.
+ *
+ * Don't support:
+ *  - All reserved registers
+ *  - All in group 7 are (supervisors only)
+ */
+
+static bool fix_up_reg(struct pt_regs *fp, long *value, int grp, int reg)
+{
+	long *val = &fp->r0;
+	unsigned long tmp;
+
+	/* Only do Dregs and Pregs for now */
+	if (grp == 5 ||
+	   (grp == 4 && (reg == 4 || reg == 5)) ||
+	   (grp == 7))
+		return false;
+
+	if (grp == 0 || (grp == 1 && reg < 6))
+		val -= (reg + 8 * grp);
+	else if (grp == 1 && reg == 6)
+		val = &fp->usp;
+	else if (grp == 1 && reg == 7)
+		val = &fp->fp;
+	else if (grp == 2) {
+		val = &fp->i0;
+		val -= reg;
+	} else if (grp == 3 && reg >= 4) {
+		val = &fp->l0;
+		val -= (reg - 4);
+	} else if (grp == 3 && reg < 4) {
+		val = &fp->b0;
+		val -= reg;
+	} else if (grp == 4 && reg < 4) {
+		val = &fp->a0x;
+		val -= reg;
+	} else if (grp == 4 && reg == 6)
+		val = &fp->astat;
+	else if (grp == 4 && reg == 7)
+		val = &fp->rets;
+	else if (grp == 6 && reg < 6) {
+		val = &fp->lc0;
+		val -= reg;
+	} else if (grp == 6 && reg == 6) {
+		__asm__ __volatile__("%0 = cycles;\n" : "=d"(tmp));
+		val = &tmp;
+	} else if (grp == 6 && reg == 7) {
+		__asm__ __volatile__("%0 = cycles2;\n" : "=d"(tmp));
+		val = &tmp;
+	}
+
+	*value = *val;
+	return true;
+
+}
+
+#define PseudoDbg_Assert_opcode         0xf0000000
+#define PseudoDbg_Assert_expected_bits  0
+#define PseudoDbg_Assert_expected_mask  0xffff
+#define PseudoDbg_Assert_regtest_bits   16
+#define PseudoDbg_Assert_regtest_mask   0x7
+#define PseudoDbg_Assert_grp_bits       19
+#define PseudoDbg_Assert_grp_mask       0x7
+#define PseudoDbg_Assert_dbgop_bits     22
+#define PseudoDbg_Assert_dbgop_mask     0x3
+#define PseudoDbg_Assert_dontcare_bits  24
+#define PseudoDbg_Assert_dontcare_mask  0x7
+#define PseudoDbg_Assert_code_bits      27
+#define PseudoDbg_Assert_code_mask      0x1f
+
+/*
+ * DBGA - debug assert
+ */
+bool execute_pseudodbg_assert(struct pt_regs *fp, unsigned int opcode)
+{
+	int expected = ((opcode >> PseudoDbg_Assert_expected_bits) & PseudoDbg_Assert_expected_mask);
+	int dbgop    = ((opcode >> (PseudoDbg_Assert_dbgop_bits)) & PseudoDbg_Assert_dbgop_mask);
+	int grp      = ((opcode >> (PseudoDbg_Assert_grp_bits)) & PseudoDbg_Assert_grp_mask);
+	int regtest  = ((opcode >> (PseudoDbg_Assert_regtest_bits)) & PseudoDbg_Assert_regtest_mask);
+	long value;
+
+	if ((opcode & 0xFF000000) != PseudoDbg_Assert_opcode)
+		return false;
+
+	if (!fix_up_reg(fp, &value, grp, regtest))
+		return false;
+
+	if (dbgop == 0 || dbgop == 2) {
+		/* DBGA ( regs_lo , uimm16 ) */
+		/* DBGAL ( regs , uimm16 ) */
+		if (expected != (value & 0xFFFF)) {
+			pr_notice("DBGA (%s.L,0x%x) failure, got 0x%x\n",
+				get_allreg_name(grp, regtest),
+				expected, (unsigned int)(value & 0xFFFF));
+			return false;
+		}
+
+	} else if (dbgop == 1 || dbgop == 3) {
+		/* DBGA ( regs_hi , uimm16 ) */
+		/* DBGAH ( regs , uimm16 ) */
+		if (expected != ((value >> 16) & 0xFFFF)) {
+			pr_notice("DBGA (%s.H,0x%x) failure, got 0x%x\n",
+				get_allreg_name(grp, regtest),
+				expected, (unsigned int)((value >> 16) & 0xFFFF));
+			return false;
+		}
+	}
+
+	fp->pc += 4;
+	return true;
+}
+
+#define PseudoDbg_opcode        0xf8000000
+#define PseudoDbg_reg_bits      0
+#define PseudoDbg_reg_mask      0x7
+#define PseudoDbg_grp_bits      3
+#define PseudoDbg_grp_mask      0x7
+#define PseudoDbg_fn_bits       6
+#define PseudoDbg_fn_mask       0x3
+#define PseudoDbg_code_bits     8
+#define PseudoDbg_code_mask     0xff
+
+/*
+ * DBG - debug (dump a register value out)
+ */
+bool execute_pseudodbg(struct pt_regs *fp, unsigned int opcode)
+{
+	int grp, fn, reg;
+	long value, value1;
+
+	if ((opcode & 0xFF000000) != PseudoDbg_opcode)
+		return false;
+
+	opcode >>= 16;
+	grp = ((opcode >> PseudoDbg_grp_bits) & PseudoDbg_reg_mask);
+	fn  = ((opcode >> PseudoDbg_fn_bits)  & PseudoDbg_fn_mask);
+	reg = ((opcode >> PseudoDbg_reg_bits) & PseudoDbg_reg_mask);
+
+	if (fn == 3 && (reg == 0 || reg == 1)) {
+		if (!fix_up_reg(fp, &value, 4, 2 * reg))
+			return false;
+		if (!fix_up_reg(fp, &value1, 4, 2 * reg + 1))
+			return false;
+
+		pr_notice("DBG A%i = %02lx%08lx\n", reg, value & 0xFF, value1);
+		fp->pc += 2;
+		return true;
+
+	} else if (fn == 0) {
+		if (!fix_up_reg(fp, &value, grp, reg))
+			return false;
+
+		pr_notice("DBG %s = %08lx\n", get_allreg_name(grp, reg), value);
+		fp->pc += 2;
+		return true;
+	}
+
+	return false;
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/ptrace.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/ptrace.c
new file mode 100644
index 0000000..a682709
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/ptrace.c
@@ -0,0 +1,413 @@
+/*
+ * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
+ * these modifications are Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/elf.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/regset.h>
+#include <linux/signal.h>
+#include <linux/tracehook.h>
+#include <linux/uaccess.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/asm-offsets.h>
+#include <asm/dma.h>
+#include <asm/fixed_code.h>
+#include <asm/cacheflush.h>
+#include <asm/mem_map.h>
+#include <asm/mmu_context.h>
+
+/*
+ * does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+/*
+ * Get contents of register REGNO in task TASK.
+ */
+static inline long
+get_reg(struct task_struct *task, unsigned long regno,
+	unsigned long __user *datap)
+{
+	long tmp;
+	struct pt_regs *regs = task_pt_regs(task);
+
+	if (regno & 3 || regno > PT_LAST_PSEUDO)
+		return -EIO;
+
+	switch (regno) {
+	case PT_TEXT_ADDR:
+		tmp = task->mm->start_code;
+		break;
+	case PT_TEXT_END_ADDR:
+		tmp = task->mm->end_code;
+		break;
+	case PT_DATA_ADDR:
+		tmp = task->mm->start_data;
+		break;
+	case PT_USP:
+		tmp = task->thread.usp;
+		break;
+	default:
+		if (regno < sizeof(*regs)) {
+			void *reg_ptr = regs;
+			tmp = *(long *)(reg_ptr + regno);
+		} else
+			return -EIO;
+	}
+
+	return put_user(tmp, datap);
+}
+
+/*
+ * Write contents of register REGNO in task TASK.
+ */
+static inline int
+put_reg(struct task_struct *task, unsigned long regno, unsigned long data)
+{
+	struct pt_regs *regs = task_pt_regs(task);
+
+	if (regno & 3 || regno > PT_LAST_PSEUDO)
+		return -EIO;
+
+	switch (regno) {
+	case PT_PC:
+		/*********************************************************************/
+		/* At this point the kernel is most likely in exception.             */
+		/* The RETX register will be used to populate the pc of the process. */
+		/*********************************************************************/
+		regs->retx = data;
+		regs->pc = data;
+		break;
+	case PT_RETX:
+		break;		/* regs->retx = data; break; */
+	case PT_USP:
+		regs->usp = data;
+		task->thread.usp = data;
+		break;
+	case PT_SYSCFG:	/* don't let userspace screw with this */
+		if ((data & ~1) != 0x6)
+			pr_warning("ptrace: ignore syscfg write of %#lx\n", data);
+		break;		/* regs->syscfg = data; break; */
+	default:
+		if (regno < sizeof(*regs)) {
+			void *reg_offset = regs;
+			*(long *)(reg_offset + regno) = data;
+		}
+		/* Ignore writes to pseudo registers */
+	}
+
+	return 0;
+}
+
+/*
+ * check that an address falls within the bounds of the target process's memory mappings
+ */
+int
+is_user_addr_valid(struct task_struct *child, unsigned long start, unsigned long len)
+{
+	bool valid;
+	struct vm_area_struct *vma;
+	struct sram_list_struct *sraml;
+
+	/* overflow */
+	if (start + len < start)
+		return -EIO;
+
+	down_read(&child->mm->mmap_sem);
+	vma = find_vma(child->mm, start);
+	valid = vma && start >= vma->vm_start && start + len <= vma->vm_end;
+	up_read(&child->mm->mmap_sem);
+	if (valid)
+		return 0;
+
+	for (sraml = child->mm->context.sram_list; sraml; sraml = sraml->next)
+		if (start >= (unsigned long)sraml->addr
+		    && start + len < (unsigned long)sraml->addr + sraml->length)
+			return 0;
+
+	if (start >= FIXED_CODE_START && start + len < FIXED_CODE_END)
+		return 0;
+
+#ifdef CONFIG_APP_STACK_L1
+	if (child->mm->context.l1_stack_save)
+		if (start >= (unsigned long)l1_stack_base &&
+			start + len < (unsigned long)l1_stack_base + l1_stack_len)
+			return 0;
+#endif
+
+	return -EIO;
+}
+
+/*
+ * retrieve the contents of Blackfin userspace general registers
+ */
+static int genregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	/* This sucks ... */
+	regs->usp = target->thread.usp;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  regs, 0, sizeof(*regs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					sizeof(*regs), -1);
+}
+
+/*
+ * update the contents of the Blackfin userspace general registers
+ */
+static int genregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	/* Don't let people set SYSCFG (it's at the end of pt_regs) */
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 regs, 0, PT_SYSCFG);
+	if (ret < 0)
+		return ret;
+
+	/* This sucks ... */
+	target->thread.usp = regs->usp;
+	/* regs->retx = regs->pc; */
+
+	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					PT_SYSCFG, -1);
+}
+
+/*
+ * Define the register sets available on the Blackfin under Linux
+ */
+enum bfin_regset {
+	REGSET_GENERAL,
+};
+
+static const struct user_regset bfin_regsets[] = {
+	[REGSET_GENERAL] = {
+		.core_note_type = NT_PRSTATUS,
+		.n              = sizeof(struct pt_regs) / sizeof(long),
+		.size           = sizeof(long),
+		.align          = sizeof(long),
+		.get            = genregs_get,
+		.set            = genregs_set,
+	},
+};
+
+static const struct user_regset_view user_bfin_native_view = {
+	.name      = "Blackfin",
+	.e_machine = EM_BLACKFIN,
+	.regsets   = bfin_regsets,
+	.n         = ARRAY_SIZE(bfin_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_bfin_native_view;
+}
+
+void user_enable_single_step(struct task_struct *child)
+{
+	struct pt_regs *regs = task_pt_regs(child);
+	regs->syscfg |= SYSCFG_SSSTEP;
+
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	struct pt_regs *regs = task_pt_regs(child);
+	regs->syscfg &= ~SYSCFG_SSSTEP;
+
+	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
+{
+	int ret;
+	unsigned long __user *datap = (unsigned long __user *)data;
+	void *paddr = (void *)addr;
+
+	switch (request) {
+		/* when I and D space are separate, these will need to be fixed. */
+	case PTRACE_PEEKDATA:
+		pr_debug("ptrace: PEEKDATA\n");
+		/* fall through */
+	case PTRACE_PEEKTEXT:	/* read word at location addr. */
+		{
+			unsigned long tmp = 0;
+			int copied = 0, to_copy = sizeof(tmp);
+
+			ret = -EIO;
+			pr_debug("ptrace: PEEKTEXT at addr 0x%08lx + %i\n", addr, to_copy);
+			if (is_user_addr_valid(child, addr, to_copy) < 0)
+				break;
+			pr_debug("ptrace: user address is valid\n");
+
+			switch (bfin_mem_access_type(addr, to_copy)) {
+			case BFIN_MEM_ACCESS_CORE:
+			case BFIN_MEM_ACCESS_CORE_ONLY:
+				copied = ptrace_access_vm(child, addr, &tmp,
+							   to_copy, FOLL_FORCE);
+				if (copied)
+					break;
+
+				/* hrm, why didn't that work ... maybe no mapping */
+				if (addr >= FIXED_CODE_START &&
+				    addr + to_copy <= FIXED_CODE_END) {
+					copy_from_user_page(0, 0, 0, &tmp, paddr, to_copy);
+					copied = to_copy;
+				} else if (addr >= BOOT_ROM_START) {
+					memcpy(&tmp, paddr, to_copy);
+					copied = to_copy;
+				}
+
+				break;
+			case BFIN_MEM_ACCESS_DMA:
+				if (safe_dma_memcpy(&tmp, paddr, to_copy))
+					copied = to_copy;
+				break;
+			case BFIN_MEM_ACCESS_ITEST:
+				if (isram_memcpy(&tmp, paddr, to_copy))
+					copied = to_copy;
+				break;
+			default:
+				copied = 0;
+				break;
+			}
+
+			pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp);
+			if (copied == to_copy)
+				ret = put_user(tmp, datap);
+			break;
+		}
+
+		/* when I and D space are separate, this will have to be fixed. */
+	case PTRACE_POKEDATA:
+		pr_debug("ptrace: PTRACE_PEEKDATA\n");
+		/* fall through */
+	case PTRACE_POKETEXT:	/* write the word at location addr. */
+		{
+			int copied = 0, to_copy = sizeof(data);
+
+			ret = -EIO;
+			pr_debug("ptrace: POKETEXT at addr 0x%08lx + %i bytes %lx\n",
+			         addr, to_copy, data);
+			if (is_user_addr_valid(child, addr, to_copy) < 0)
+				break;
+			pr_debug("ptrace: user address is valid\n");
+
+			switch (bfin_mem_access_type(addr, to_copy)) {
+			case BFIN_MEM_ACCESS_CORE:
+			case BFIN_MEM_ACCESS_CORE_ONLY:
+				copied = ptrace_access_vm(child, addr, &data,
+				                           to_copy,
+							   FOLL_FORCE | FOLL_WRITE);
+				break;
+			case BFIN_MEM_ACCESS_DMA:
+				if (safe_dma_memcpy(paddr, &data, to_copy))
+					copied = to_copy;
+				break;
+			case BFIN_MEM_ACCESS_ITEST:
+				if (isram_memcpy(paddr, &data, to_copy))
+					copied = to_copy;
+				break;
+			default:
+				copied = 0;
+				break;
+			}
+
+			pr_debug("ptrace: copied size %d\n", copied);
+			if (copied == to_copy)
+				ret = 0;
+			break;
+		}
+
+	case PTRACE_PEEKUSR:
+		switch (addr) {
+#ifdef CONFIG_BINFMT_ELF_FDPIC	/* backwards compat */
+		case PT_FDPIC_EXEC:
+			request = PTRACE_GETFDPIC;
+			addr = PTRACE_GETFDPIC_EXEC;
+			goto case_default;
+		case PT_FDPIC_INTERP:
+			request = PTRACE_GETFDPIC;
+			addr = PTRACE_GETFDPIC_INTERP;
+			goto case_default;
+#endif
+		default:
+			ret = get_reg(child, addr, datap);
+		}
+		pr_debug("ptrace: PEEKUSR reg %li with %#lx = %i\n", addr, data, ret);
+		break;
+
+	case PTRACE_POKEUSR:
+		ret = put_reg(child, addr, data);
+		pr_debug("ptrace: POKEUSR reg %li with %li = %i\n", addr, data, ret);
+		break;
+
+	case PTRACE_GETREGS:
+		pr_debug("ptrace: PTRACE_GETREGS\n");
+		return copy_regset_to_user(child, &user_bfin_native_view,
+					   REGSET_GENERAL,
+					   0, sizeof(struct pt_regs),
+					   datap);
+
+	case PTRACE_SETREGS:
+		pr_debug("ptrace: PTRACE_SETREGS\n");
+		return copy_regset_from_user(child, &user_bfin_native_view,
+					     REGSET_GENERAL,
+					     0, sizeof(struct pt_regs),
+					     datap);
+
+	case_default:
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+
+	return ret;
+}
+
+asmlinkage int syscall_trace_enter(struct pt_regs *regs)
+{
+	int ret = 0;
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		ret = tracehook_report_syscall_entry(regs);
+
+	return ret;
+}
+
+asmlinkage void syscall_trace_leave(struct pt_regs *regs)
+{
+	int step;
+
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/reboot.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/reboot.c
new file mode 100644
index 0000000..c4f50a3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/reboot.c
@@ -0,0 +1,115 @@
+/*
+ * arch/blackfin/kernel/reboot.c - handle shutdown/reboot
+ *
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/interrupt.h>
+#include <asm/bfin-global.h>
+#include <asm/reboot.h>
+#include <asm/bfrom.h>
+
+/* A system soft reset makes external memory unusable so force
+ * this function into L1.  We use the compiler ssync here rather
+ * than SSYNC() because it's safe (no interrupts and such) and
+ * we save some L1.  We do not need to force sanity in the SYSCR
+ * register as the BMODE selection bit is cleared by the soft
+ * reset while the Core B bit (on dual core parts) is cleared by
+ * the core reset.
+ */
+__attribute__ ((__l1_text__, __noreturn__))
+static void bfin_reset(void)
+{
+#ifndef CONFIG_BF60x
+	if (!ANOMALY_05000353 && !ANOMALY_05000386)
+		bfrom_SoftReset((void *)(L1_SCRATCH_START + L1_SCRATCH_LENGTH - 20));
+
+	/* Wait for completion of "system" events such as cache line
+	 * line fills so that we avoid infinite stalls later on as
+	 * much as possible.  This code is in L1, so it won't trigger
+	 * any such event after this point in time.
+	 */
+	__builtin_bfin_ssync();
+
+	/* Initiate System software reset. */
+	bfin_write_SWRST(0x7);
+
+	/* Due to the way reset is handled in the hardware, we need
+	 * to delay for 10 SCLKS.  The only reliable way to do this is
+	 * to calculate the CCLK/SCLK ratio and multiply 10.  For now,
+	 * we'll assume worse case which is a 1:15 ratio.
+	 */
+	asm(
+		"LSETUP (1f, 1f) LC0 = %0\n"
+		"1: nop;"
+		:
+		: "a" (15 * 10)
+		: "LC0", "LB0", "LT0"
+	);
+
+	/* Clear System software reset */
+	bfin_write_SWRST(0);
+
+	/* The BF526 ROM will crash during reset */
+#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
+	/* Seems to be fixed with newer parts though ... */
+	if (__SILICON_REVISION__ < 1 && bfin_revid() < 1)
+		bfin_read_SWRST();
+#endif
+	/* Wait for the SWRST write to complete.  Cannot rely on SSYNC
+	 * though as the System state is all reset now.
+	 */
+	asm(
+		"LSETUP (1f, 1f) LC1 = %0\n"
+		"1: nop;"
+		:
+		: "a" (15 * 1)
+		: "LC1", "LB1", "LT1"
+	);
+
+	while (1)
+		/* Issue core reset */
+		asm("raise 1");
+#else
+	while (1)
+		bfin_write_RCU0_CTL(0x1);
+#endif
+}
+
+__attribute__((weak))
+void native_machine_restart(char *cmd)
+{
+}
+
+void machine_restart(char *cmd)
+{
+	native_machine_restart(cmd);
+	if (smp_processor_id())
+		smp_call_function((void *)bfin_reset, 0, 1);
+	else
+		bfin_reset();
+}
+
+__attribute__((weak))
+void native_machine_halt(void)
+{
+	idle_with_irq_disabled();
+}
+
+void machine_halt(void)
+{
+	native_machine_halt();
+}
+
+__attribute__((weak))
+void native_machine_power_off(void)
+{
+	idle_with_irq_disabled();
+}
+
+void machine_power_off(void)
+{
+	native_machine_power_off();
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/setup.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/setup.c
new file mode 100644
index 0000000..ad82468
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/setup.c
@@ -0,0 +1,1468 @@
+/*
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/delay.h>
+#include <linux/console.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/cpu.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/pfn.h>
+
+#ifdef CONFIG_MTD_UCLINUX
+#include <linux/mtd/map.h>
+#include <linux/ext2_fs.h>
+#include <uapi/linux/cramfs_fs.h>
+#include <linux/romfs_fs.h>
+#endif
+
+#include <asm/cplb.h>
+#include <asm/cacheflush.h>
+#include <asm/blackfin.h>
+#include <asm/cplbinit.h>
+#include <asm/clocks.h>
+#include <asm/div64.h>
+#include <asm/cpu.h>
+#include <asm/fixed_code.h>
+#include <asm/early_printk.h>
+#include <asm/irq_handler.h>
+#include <asm/pda.h>
+#ifdef CONFIG_BF60x
+#include <mach/pm.h>
+#endif
+#ifdef CONFIG_SCB_PRIORITY
+#include <asm/scb.h>
+#endif
+
+u16 _bfin_swrst;
+EXPORT_SYMBOL(_bfin_swrst);
+
+unsigned long memory_start, memory_end, physical_mem_end;
+unsigned long _rambase, _ramstart, _ramend;
+unsigned long reserved_mem_dcache_on;
+unsigned long reserved_mem_icache_on;
+EXPORT_SYMBOL(memory_start);
+EXPORT_SYMBOL(memory_end);
+EXPORT_SYMBOL(physical_mem_end);
+EXPORT_SYMBOL(_ramend);
+EXPORT_SYMBOL(reserved_mem_dcache_on);
+
+#ifdef CONFIG_MTD_UCLINUX
+extern struct map_info uclinux_ram_map;
+unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
+EXPORT_SYMBOL(memory_mtd_end);
+EXPORT_SYMBOL(memory_mtd_start);
+EXPORT_SYMBOL(mtd_size);
+#endif
+
+char __initdata command_line[COMMAND_LINE_SIZE];
+struct blackfin_initial_pda __initdata initial_pda;
+
+/* boot memmap, for parsing "memmap=" */
+#define BFIN_MEMMAP_MAX		128 /* number of entries in bfin_memmap */
+#define BFIN_MEMMAP_RAM		1
+#define BFIN_MEMMAP_RESERVED	2
+static struct bfin_memmap {
+	int nr_map;
+	struct bfin_memmap_entry {
+		unsigned long long addr; /* start of memory segment */
+		unsigned long long size;
+		unsigned long type;
+	} map[BFIN_MEMMAP_MAX];
+} bfin_memmap __initdata;
+
+/* for memmap sanitization */
+struct change_member {
+	struct bfin_memmap_entry *pentry; /* pointer to original entry */
+	unsigned long long addr; /* address for this change point */
+};
+static struct change_member change_point_list[2*BFIN_MEMMAP_MAX] __initdata;
+static struct change_member *change_point[2*BFIN_MEMMAP_MAX] __initdata;
+static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata;
+static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata;
+
+DEFINE_PER_CPU(struct blackfin_cpudata, cpu_data);
+
+static int early_init_clkin_hz(char *buf);
+
+#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
+void __init generate_cplb_tables(void)
+{
+	unsigned int cpu;
+
+	generate_cplb_tables_all();
+	/* Generate per-CPU I&D CPLB tables */
+	for (cpu = 0; cpu < num_possible_cpus(); ++cpu)
+		generate_cplb_tables_cpu(cpu);
+}
+#endif
+
+void bfin_setup_caches(unsigned int cpu)
+{
+#ifdef CONFIG_BFIN_ICACHE
+	bfin_icache_init(icplb_tbl[cpu]);
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+	bfin_dcache_init(dcplb_tbl[cpu]);
+#endif
+
+	bfin_setup_cpudata(cpu);
+
+	/*
+	 * In cache coherence emulation mode, we need to have the
+	 * D-cache enabled before running any atomic operation which
+	 * might involve cache invalidation (i.e. spinlock, rwlock).
+	 * So printk's are deferred until then.
+	 */
+#ifdef CONFIG_BFIN_ICACHE
+	printk(KERN_INFO "Instruction Cache Enabled for CPU%u\n", cpu);
+	printk(KERN_INFO "  External memory:"
+# ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
+	       " cacheable"
+# else
+	       " uncacheable"
+# endif
+	       " in instruction cache\n");
+	if (L2_LENGTH)
+		printk(KERN_INFO "  L2 SRAM        :"
+# ifdef CONFIG_BFIN_L2_ICACHEABLE
+		       " cacheable"
+# else
+		       " uncacheable"
+# endif
+		       " in instruction cache\n");
+
+#else
+	printk(KERN_INFO "Instruction Cache Disabled for CPU%u\n", cpu);
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+	printk(KERN_INFO "Data Cache Enabled for CPU%u\n", cpu);
+	printk(KERN_INFO "  External memory:"
+# if defined CONFIG_BFIN_EXTMEM_WRITEBACK
+	       " cacheable (write-back)"
+# elif defined CONFIG_BFIN_EXTMEM_WRITETHROUGH
+	       " cacheable (write-through)"
+# else
+	       " uncacheable"
+# endif
+	       " in data cache\n");
+	if (L2_LENGTH)
+		printk(KERN_INFO "  L2 SRAM        :"
+# if defined CONFIG_BFIN_L2_WRITEBACK
+		       " cacheable (write-back)"
+# elif defined CONFIG_BFIN_L2_WRITETHROUGH
+		       " cacheable (write-through)"
+# else
+		       " uncacheable"
+# endif
+		       " in data cache\n");
+#else
+	printk(KERN_INFO "Data Cache Disabled for CPU%u\n", cpu);
+#endif
+}
+
+void bfin_setup_cpudata(unsigned int cpu)
+{
+	struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu);
+
+	cpudata->imemctl = bfin_read_IMEM_CONTROL();
+	cpudata->dmemctl = bfin_read_DMEM_CONTROL();
+}
+
+void __init bfin_cache_init(void)
+{
+#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
+	generate_cplb_tables();
+#endif
+	bfin_setup_caches(0);
+}
+
+void __init bfin_relocate_l1_mem(void)
+{
+	unsigned long text_l1_len = (unsigned long)_text_l1_len;
+	unsigned long data_l1_len = (unsigned long)_data_l1_len;
+	unsigned long data_b_l1_len = (unsigned long)_data_b_l1_len;
+	unsigned long l2_len = (unsigned long)_l2_len;
+
+	early_shadow_stamp();
+
+	/*
+	 * due to the ALIGN(4) in the arch/blackfin/kernel/vmlinux.lds.S
+	 * we know that everything about l1 text/data is nice and aligned,
+	 * so copy by 4 byte chunks, and don't worry about overlapping
+	 * src/dest.
+	 *
+	 * We can't use the dma_memcpy functions, since they can call
+	 * scheduler functions which might be in L1 :( and core writes
+	 * into L1 instruction cause bad access errors, so we are stuck,
+	 * we are required to use DMA, but can't use the common dma
+	 * functions. We can't use memcpy either - since that might be
+	 * going to be in the relocated L1
+	 */
+
+	blackfin_dma_early_init();
+
+	/* if necessary, copy L1 text to L1 instruction SRAM */
+	if (L1_CODE_LENGTH && text_l1_len)
+		early_dma_memcpy(_stext_l1, _text_l1_lma, text_l1_len);
+
+	/* if necessary, copy L1 data to L1 data bank A SRAM */
+	if (L1_DATA_A_LENGTH && data_l1_len)
+		early_dma_memcpy(_sdata_l1, _data_l1_lma, data_l1_len);
+
+	/* if necessary, copy L1 data B to L1 data bank B SRAM */
+	if (L1_DATA_B_LENGTH && data_b_l1_len)
+		early_dma_memcpy(_sdata_b_l1, _data_b_l1_lma, data_b_l1_len);
+
+	early_dma_memcpy_done();
+
+#if defined(CONFIG_SMP) && defined(CONFIG_ICACHE_FLUSH_L1)
+	blackfin_iflush_l1_entry[0] = (unsigned long)blackfin_icache_flush_range_l1;
+#endif
+
+	/* if necessary, copy L2 text/data to L2 SRAM */
+	if (L2_LENGTH && l2_len)
+		memcpy(_stext_l2, _l2_lma, l2_len);
+}
+
+#ifdef CONFIG_SMP
+void __init bfin_relocate_coreb_l1_mem(void)
+{
+	unsigned long text_l1_len = (unsigned long)_text_l1_len;
+	unsigned long data_l1_len = (unsigned long)_data_l1_len;
+	unsigned long data_b_l1_len = (unsigned long)_data_b_l1_len;
+
+	blackfin_dma_early_init();
+
+	/* if necessary, copy L1 text to L1 instruction SRAM */
+	if (L1_CODE_LENGTH && text_l1_len)
+		early_dma_memcpy((void *)COREB_L1_CODE_START, _text_l1_lma,
+				text_l1_len);
+
+	/* if necessary, copy L1 data to L1 data bank A SRAM */
+	if (L1_DATA_A_LENGTH && data_l1_len)
+		early_dma_memcpy((void *)COREB_L1_DATA_A_START, _data_l1_lma,
+				data_l1_len);
+
+	/* if necessary, copy L1 data B to L1 data bank B SRAM */
+	if (L1_DATA_B_LENGTH && data_b_l1_len)
+		early_dma_memcpy((void *)COREB_L1_DATA_B_START, _data_b_l1_lma,
+				data_b_l1_len);
+
+	early_dma_memcpy_done();
+
+#ifdef CONFIG_ICACHE_FLUSH_L1
+	blackfin_iflush_l1_entry[1] = (unsigned long)blackfin_icache_flush_range_l1 -
+			(unsigned long)_stext_l1 + COREB_L1_CODE_START;
+#endif
+}
+#endif
+
+#ifdef CONFIG_ROMKERNEL
+void __init bfin_relocate_xip_data(void)
+{
+	early_shadow_stamp();
+
+	memcpy(_sdata, _data_lma, (unsigned long)_data_len - THREAD_SIZE + sizeof(struct thread_info));
+	memcpy(_sinitdata, _init_data_lma, (unsigned long)_init_data_len);
+}
+#endif
+
+/* add_memory_region to memmap */
+static void __init add_memory_region(unsigned long long start,
+			      unsigned long long size, int type)
+{
+	int i;
+
+	i = bfin_memmap.nr_map;
+
+	if (i == BFIN_MEMMAP_MAX) {
+		printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
+		return;
+	}
+
+	bfin_memmap.map[i].addr = start;
+	bfin_memmap.map[i].size = size;
+	bfin_memmap.map[i].type = type;
+	bfin_memmap.nr_map++;
+}
+
+/*
+ * Sanitize the boot memmap, removing overlaps.
+ */
+static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map)
+{
+	struct change_member *change_tmp;
+	unsigned long current_type, last_type;
+	unsigned long long last_addr;
+	int chgidx, still_changing;
+	int overlap_entries;
+	int new_entry;
+	int old_nr, new_nr, chg_nr;
+	int i;
+
+	/*
+		Visually we're performing the following (1,2,3,4 = memory types)
+
+		Sample memory map (w/overlaps):
+		   ____22__________________
+		   ______________________4_
+		   ____1111________________
+		   _44_____________________
+		   11111111________________
+		   ____________________33__
+		   ___________44___________
+		   __________33333_________
+		   ______________22________
+		   ___________________2222_
+		   _________111111111______
+		   _____________________11_
+		   _________________4______
+
+		Sanitized equivalent (no overlap):
+		   1_______________________
+		   _44_____________________
+		   ___1____________________
+		   ____22__________________
+		   ______11________________
+		   _________1______________
+		   __________3_____________
+		   ___________44___________
+		   _____________33_________
+		   _______________2________
+		   ________________1_______
+		   _________________4______
+		   ___________________2____
+		   ____________________33__
+		   ______________________4_
+	*/
+	/* if there's only one memory region, don't bother */
+	if (*pnr_map < 2)
+		return -1;
+
+	old_nr = *pnr_map;
+
+	/* bail out if we find any unreasonable addresses in memmap */
+	for (i = 0; i < old_nr; i++)
+		if (map[i].addr + map[i].size < map[i].addr)
+			return -1;
+
+	/* create pointers for initial change-point information (for sorting) */
+	for (i = 0; i < 2*old_nr; i++)
+		change_point[i] = &change_point_list[i];
+
+	/* record all known change-points (starting and ending addresses),
+	   omitting those that are for empty memory regions */
+	chgidx = 0;
+	for (i = 0; i < old_nr; i++) {
+		if (map[i].size != 0) {
+			change_point[chgidx]->addr = map[i].addr;
+			change_point[chgidx++]->pentry = &map[i];
+			change_point[chgidx]->addr = map[i].addr + map[i].size;
+			change_point[chgidx++]->pentry = &map[i];
+		}
+	}
+	chg_nr = chgidx;	/* true number of change-points */
+
+	/* sort change-point list by memory addresses (low -> high) */
+	still_changing = 1;
+	while (still_changing) {
+		still_changing = 0;
+		for (i = 1; i < chg_nr; i++) {
+			/* if <current_addr> > <last_addr>, swap */
+			/* or, if current=<start_addr> & last=<end_addr>, swap */
+			if ((change_point[i]->addr < change_point[i-1]->addr) ||
+				((change_point[i]->addr == change_point[i-1]->addr) &&
+				 (change_point[i]->addr == change_point[i]->pentry->addr) &&
+				 (change_point[i-1]->addr != change_point[i-1]->pentry->addr))
+			   ) {
+				change_tmp = change_point[i];
+				change_point[i] = change_point[i-1];
+				change_point[i-1] = change_tmp;
+				still_changing = 1;
+			}
+		}
+	}
+
+	/* create a new memmap, removing overlaps */
+	overlap_entries = 0;	/* number of entries in the overlap table */
+	new_entry = 0;		/* index for creating new memmap entries */
+	last_type = 0;		/* start with undefined memory type */
+	last_addr = 0;		/* start with 0 as last starting address */
+	/* loop through change-points, determining affect on the new memmap */
+	for (chgidx = 0; chgidx < chg_nr; chgidx++) {
+		/* keep track of all overlapping memmap entries */
+		if (change_point[chgidx]->addr == change_point[chgidx]->pentry->addr) {
+			/* add map entry to overlap list (> 1 entry implies an overlap) */
+			overlap_list[overlap_entries++] = change_point[chgidx]->pentry;
+		} else {
+			/* remove entry from list (order independent, so swap with last) */
+			for (i = 0; i < overlap_entries; i++) {
+				if (overlap_list[i] == change_point[chgidx]->pentry)
+					overlap_list[i] = overlap_list[overlap_entries-1];
+			}
+			overlap_entries--;
+		}
+		/* if there are overlapping entries, decide which "type" to use */
+		/* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
+		current_type = 0;
+		for (i = 0; i < overlap_entries; i++)
+			if (overlap_list[i]->type > current_type)
+				current_type = overlap_list[i]->type;
+		/* continue building up new memmap based on this information */
+		if (current_type != last_type) {
+			if (last_type != 0) {
+				new_map[new_entry].size =
+					change_point[chgidx]->addr - last_addr;
+				/* move forward only if the new size was non-zero */
+				if (new_map[new_entry].size != 0)
+					if (++new_entry >= BFIN_MEMMAP_MAX)
+						break;	/* no more space left for new entries */
+			}
+			if (current_type != 0) {
+				new_map[new_entry].addr = change_point[chgidx]->addr;
+				new_map[new_entry].type = current_type;
+				last_addr = change_point[chgidx]->addr;
+			}
+			last_type = current_type;
+		}
+	}
+	new_nr = new_entry;	/* retain count for new entries */
+
+	/* copy new mapping into original location */
+	memcpy(map, new_map, new_nr*sizeof(struct bfin_memmap_entry));
+	*pnr_map = new_nr;
+
+	return 0;
+}
+
+static void __init print_memory_map(char *who)
+{
+	int i;
+
+	for (i = 0; i < bfin_memmap.nr_map; i++) {
+		printk(KERN_DEBUG " %s: %016Lx - %016Lx ", who,
+			bfin_memmap.map[i].addr,
+			bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
+		switch (bfin_memmap.map[i].type) {
+		case BFIN_MEMMAP_RAM:
+			printk(KERN_CONT "(usable)\n");
+			break;
+		case BFIN_MEMMAP_RESERVED:
+			printk(KERN_CONT "(reserved)\n");
+			break;
+		default:
+			printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type);
+			break;
+		}
+	}
+}
+
+static __init int parse_memmap(char *arg)
+{
+	unsigned long long start_at, mem_size;
+
+	if (!arg)
+		return -EINVAL;
+
+	mem_size = memparse(arg, &arg);
+	if (*arg == '@') {
+		start_at = memparse(arg+1, &arg);
+		add_memory_region(start_at, mem_size, BFIN_MEMMAP_RAM);
+	} else if (*arg == '$') {
+		start_at = memparse(arg+1, &arg);
+		add_memory_region(start_at, mem_size, BFIN_MEMMAP_RESERVED);
+	}
+
+	return 0;
+}
+
+/*
+ * Initial parsing of the command line.  Currently, we support:
+ *  - Controlling the linux memory size: mem=xxx[KMG]
+ *  - Controlling the physical memory size: max_mem=xxx[KMG][$][#]
+ *       $ -> reserved memory is dcacheable
+ *       # -> reserved memory is icacheable
+ *  - "memmap=XXX[KkmM][@][$]XXX[KkmM]" defines a memory region
+ *       @ from <start> to <start>+<mem>, type RAM
+ *       $ from <start> to <start>+<mem>, type RESERVED
+ */
+static __init void parse_cmdline_early(char *cmdline_p)
+{
+	char c = ' ', *to = cmdline_p;
+	unsigned int memsize;
+	for (;;) {
+		if (c == ' ') {
+			if (!memcmp(to, "mem=", 4)) {
+				to += 4;
+				memsize = memparse(to, &to);
+				if (memsize)
+					_ramend = memsize;
+
+			} else if (!memcmp(to, "max_mem=", 8)) {
+				to += 8;
+				memsize = memparse(to, &to);
+				if (memsize) {
+					physical_mem_end = memsize;
+					if (*to != ' ') {
+						if (*to == '$'
+						    || *(to + 1) == '$')
+							reserved_mem_dcache_on = 1;
+						if (*to == '#'
+						    || *(to + 1) == '#')
+							reserved_mem_icache_on = 1;
+					}
+				}
+			} else if (!memcmp(to, "clkin_hz=", 9)) {
+				to += 9;
+				early_init_clkin_hz(to);
+#ifdef CONFIG_EARLY_PRINTK
+			} else if (!memcmp(to, "earlyprintk=", 12)) {
+				to += 12;
+				setup_early_printk(to);
+#endif
+			} else if (!memcmp(to, "memmap=", 7)) {
+				to += 7;
+				parse_memmap(to);
+			}
+		}
+		c = *(to++);
+		if (!c)
+			break;
+	}
+}
+
+/*
+ * Setup memory defaults from user config.
+ * The physical memory layout looks like:
+ *
+ *  [_rambase, _ramstart]:		kernel image
+ *  [memory_start, memory_end]:		dynamic memory managed by kernel
+ *  [memory_end, _ramend]:		reserved memory
+ *  	[memory_mtd_start(memory_end),
+ *  		memory_mtd_start + mtd_size]:	rootfs (if any)
+ *	[_ramend - DMA_UNCACHED_REGION,
+ *		_ramend]:			uncached DMA region
+ *  [_ramend, physical_mem_end]:	memory not managed by kernel
+ */
+static __init void memory_setup(void)
+{
+#ifdef CONFIG_MTD_UCLINUX
+	unsigned long mtd_phys = 0;
+#endif
+	unsigned long max_mem;
+
+	_rambase = CONFIG_BOOT_LOAD;
+	_ramstart = (unsigned long)_end;
+
+	if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) {
+		console_init();
+		panic("DMA region exceeds memory limit: %lu.",
+			_ramend - _ramstart);
+	}
+	max_mem = memory_end = _ramend - DMA_UNCACHED_REGION;
+
+#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
+	/* Due to a Hardware Anomaly we need to limit the size of usable
+	 * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
+	 * 05000263 - Hardware loop corrupted when taking an ICPLB exception
+	 */
+# if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
+	if (max_mem >= 56 * 1024 * 1024)
+		max_mem = 56 * 1024 * 1024;
+# else
+	if (max_mem >= 60 * 1024 * 1024)
+		max_mem = 60 * 1024 * 1024;
+# endif				/* CONFIG_DEBUG_HUNT_FOR_ZERO */
+#endif				/* ANOMALY_05000263 */
+
+
+#ifdef CONFIG_MPU
+	/* Round up to multiple of 4MB */
+	memory_start = (_ramstart + 0x3fffff) & ~0x3fffff;
+#else
+	memory_start = PAGE_ALIGN(_ramstart);
+#endif
+
+#if defined(CONFIG_MTD_UCLINUX)
+	/* generic memory mapped MTD driver */
+	memory_mtd_end = memory_end;
+
+	mtd_phys = _ramstart;
+	mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 8)));
+
+# if defined(CONFIG_EXT2_FS) || defined(CONFIG_EXT3_FS)
+	if (*((unsigned short *)(mtd_phys + 0x438)) == EXT2_SUPER_MAGIC)
+		mtd_size =
+		    PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x404)) << 10);
+# endif
+
+# if defined(CONFIG_CRAMFS)
+	if (*((unsigned long *)(mtd_phys)) == CRAMFS_MAGIC)
+		mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x4)));
+# endif
+
+# if defined(CONFIG_ROMFS_FS)
+	if (((unsigned long *)mtd_phys)[0] == ROMSB_WORD0
+	    && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1) {
+		mtd_size =
+		    PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
+
+		/* ROM_FS is XIP, so if we found it, we need to limit memory */
+		if (memory_end > max_mem) {
+			pr_info("Limiting kernel memory to %liMB due to anomaly 05000263\n",
+				(max_mem - CONFIG_PHY_RAM_BASE_ADDRESS) >> 20);
+			memory_end = max_mem;
+		}
+	}
+# endif				/* CONFIG_ROMFS_FS */
+
+	/* Since the default MTD_UCLINUX has no magic number, we just blindly
+	 * read 8 past the end of the kernel's image, and look at it.
+	 * When no image is attached, mtd_size is set to a random number
+	 * Do some basic sanity checks before operating on things
+	 */
+	if (mtd_size == 0 || memory_end <= mtd_size) {
+		pr_emerg("Could not find valid ram mtd attached.\n");
+	} else {
+		memory_end -= mtd_size;
+
+		/* Relocate MTD image to the top of memory after the uncached memory area */
+		uclinux_ram_map.phys = memory_mtd_start = memory_end;
+		uclinux_ram_map.size = mtd_size;
+		pr_info("Found mtd parition at 0x%p, (len=0x%lx), moving to 0x%p\n",
+			_end, mtd_size, (void *)memory_mtd_start);
+		dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
+	}
+#endif				/* CONFIG_MTD_UCLINUX */
+
+	/* We need lo limit memory, since everything could have a text section
+	 * of userspace in it, and expose anomaly 05000263. If the anomaly
+	 * doesn't exist, or we don't need to - then dont.
+	 */
+	if (memory_end > max_mem) {
+		pr_info("Limiting kernel memory to %liMB due to anomaly 05000263\n",
+				(max_mem - CONFIG_PHY_RAM_BASE_ADDRESS) >> 20);
+		memory_end = max_mem;
+	}
+
+#ifdef CONFIG_MPU
+#if defined(CONFIG_ROMFS_ON_MTD) && defined(CONFIG_MTD_ROM)
+	page_mask_nelts = (((_ramend + ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE -
+					ASYNC_BANK0_BASE) >> PAGE_SHIFT) + 31) / 32;
+#else
+	page_mask_nelts = ((_ramend >> PAGE_SHIFT) + 31) / 32;
+#endif
+	page_mask_order = get_order(3 * page_mask_nelts * sizeof(long));
+#endif
+
+	init_mm.start_code = (unsigned long)_stext;
+	init_mm.end_code = (unsigned long)_etext;
+	init_mm.end_data = (unsigned long)_edata;
+	init_mm.brk = (unsigned long)0;
+
+	printk(KERN_INFO "Board Memory: %ldMB\n", (physical_mem_end - CONFIG_PHY_RAM_BASE_ADDRESS) >> 20);
+	printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", (_ramend - CONFIG_PHY_RAM_BASE_ADDRESS) >> 20);
+
+	printk(KERN_INFO "Memory map:\n"
+	       "  fixedcode = 0x%p-0x%p\n"
+	       "  text      = 0x%p-0x%p\n"
+	       "  rodata    = 0x%p-0x%p\n"
+	       "  bss       = 0x%p-0x%p\n"
+	       "  data      = 0x%p-0x%p\n"
+	       "    stack   = 0x%p-0x%p\n"
+	       "  init      = 0x%p-0x%p\n"
+	       "  available = 0x%p-0x%p\n"
+#ifdef CONFIG_MTD_UCLINUX
+	       "  rootfs    = 0x%p-0x%p\n"
+#endif
+#if DMA_UNCACHED_REGION > 0
+	       "  DMA Zone  = 0x%p-0x%p\n"
+#endif
+		, (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
+		_stext, _etext,
+		__start_rodata, __end_rodata,
+		__bss_start, __bss_stop,
+		_sdata, _edata,
+		(void *)&init_thread_union,
+		(void *)((int)(&init_thread_union) + THREAD_SIZE),
+		__init_begin, __init_end,
+		(void *)_ramstart, (void *)memory_end
+#ifdef CONFIG_MTD_UCLINUX
+		, (void *)memory_mtd_start, (void *)(memory_mtd_start + mtd_size)
+#endif
+#if DMA_UNCACHED_REGION > 0
+		, (void *)(_ramend - DMA_UNCACHED_REGION), (void *)(_ramend)
+#endif
+		);
+}
+
+/*
+ * Find the lowest, highest page frame number we have available
+ */
+void __init find_min_max_pfn(void)
+{
+	int i;
+
+	max_pfn = 0;
+	min_low_pfn = PFN_DOWN(memory_end);
+
+	for (i = 0; i < bfin_memmap.nr_map; i++) {
+		unsigned long start, end;
+		/* RAM? */
+		if (bfin_memmap.map[i].type != BFIN_MEMMAP_RAM)
+			continue;
+		start = PFN_UP(bfin_memmap.map[i].addr);
+		end = PFN_DOWN(bfin_memmap.map[i].addr +
+				bfin_memmap.map[i].size);
+		if (start >= end)
+			continue;
+		if (end > max_pfn)
+			max_pfn = end;
+		if (start < min_low_pfn)
+			min_low_pfn = start;
+	}
+}
+
+static __init void setup_bootmem_allocator(void)
+{
+	int bootmap_size;
+	int i;
+	unsigned long start_pfn, end_pfn;
+	unsigned long curr_pfn, last_pfn, size;
+
+	/* mark memory between memory_start and memory_end usable */
+	add_memory_region(memory_start,
+		memory_end - memory_start, BFIN_MEMMAP_RAM);
+	/* sanity check for overlap */
+	sanitize_memmap(bfin_memmap.map, &bfin_memmap.nr_map);
+	print_memory_map("boot memmap");
+
+	/* initialize globals in linux/bootmem.h */
+	find_min_max_pfn();
+	/* pfn of the last usable page frame */
+	if (max_pfn > memory_end >> PAGE_SHIFT)
+		max_pfn = memory_end >> PAGE_SHIFT;
+	/* pfn of last page frame directly mapped by kernel */
+	max_low_pfn = max_pfn;
+	/* pfn of the first usable page frame after kernel image*/
+	if (min_low_pfn < memory_start >> PAGE_SHIFT)
+		min_low_pfn = memory_start >> PAGE_SHIFT;
+	start_pfn = CONFIG_PHY_RAM_BASE_ADDRESS >> PAGE_SHIFT;
+	end_pfn = memory_end >> PAGE_SHIFT;
+
+	/*
+	 * give all the memory to the bootmap allocator, tell it to put the
+	 * boot mem_map at the start of memory.
+	 */
+	bootmap_size = init_bootmem_node(NODE_DATA(0),
+			memory_start >> PAGE_SHIFT,	/* map goes here */
+			start_pfn, end_pfn);
+
+	/* register the memmap regions with the bootmem allocator */
+	for (i = 0; i < bfin_memmap.nr_map; i++) {
+		/*
+		 * Reserve usable memory
+		 */
+		if (bfin_memmap.map[i].type != BFIN_MEMMAP_RAM)
+			continue;
+		/*
+		 * We are rounding up the start address of usable memory:
+		 */
+		curr_pfn = PFN_UP(bfin_memmap.map[i].addr);
+		if (curr_pfn >= end_pfn)
+			continue;
+		/*
+		 * ... and at the end of the usable range downwards:
+		 */
+		last_pfn = PFN_DOWN(bfin_memmap.map[i].addr +
+					 bfin_memmap.map[i].size);
+
+		if (last_pfn > end_pfn)
+			last_pfn = end_pfn;
+
+		/*
+		 * .. finally, did all the rounding and playing
+		 * around just make the area go away?
+		 */
+		if (last_pfn <= curr_pfn)
+			continue;
+
+		size = last_pfn - curr_pfn;
+		free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
+	}
+
+	/* reserve memory before memory_start, including bootmap */
+	reserve_bootmem(CONFIG_PHY_RAM_BASE_ADDRESS,
+		memory_start + bootmap_size + PAGE_SIZE - 1 - CONFIG_PHY_RAM_BASE_ADDRESS,
+		BOOTMEM_DEFAULT);
+}
+
+#define EBSZ_TO_MEG(ebsz) \
+({ \
+	int meg = 0; \
+	switch (ebsz & 0xf) { \
+		case 0x1: meg =  16; break; \
+		case 0x3: meg =  32; break; \
+		case 0x5: meg =  64; break; \
+		case 0x7: meg = 128; break; \
+		case 0x9: meg = 256; break; \
+		case 0xb: meg = 512; break; \
+	} \
+	meg; \
+})
+static inline int __init get_mem_size(void)
+{
+#if defined(EBIU_SDBCTL)
+# if defined(BF561_FAMILY)
+	int ret = 0;
+	u32 sdbctl = bfin_read_EBIU_SDBCTL();
+	ret += EBSZ_TO_MEG(sdbctl >>  0);
+	ret += EBSZ_TO_MEG(sdbctl >>  8);
+	ret += EBSZ_TO_MEG(sdbctl >> 16);
+	ret += EBSZ_TO_MEG(sdbctl >> 24);
+	return ret;
+# else
+	return EBSZ_TO_MEG(bfin_read_EBIU_SDBCTL());
+# endif
+#elif defined(EBIU_DDRCTL1)
+	u32 ddrctl = bfin_read_EBIU_DDRCTL1();
+	int ret = 0;
+	switch (ddrctl & 0xc0000) {
+	case DEVSZ_64:
+		ret = 64 / 8;
+		break;
+	case DEVSZ_128:
+		ret = 128 / 8;
+		break;
+	case DEVSZ_256:
+		ret = 256 / 8;
+		break;
+	case DEVSZ_512:
+		ret = 512 / 8;
+		break;
+	}
+	switch (ddrctl & 0x30000) {
+	case DEVWD_4:
+		ret *= 2;
+	case DEVWD_8:
+		ret *= 2;
+	case DEVWD_16:
+		break;
+	}
+	if ((ddrctl & 0xc000) == 0x4000)
+		ret *= 2;
+	return ret;
+#elif defined(CONFIG_BF60x)
+	u32 ddrctl = bfin_read_DMC0_CFG();
+	int ret;
+	switch (ddrctl & 0xf00) {
+	case DEVSZ_64:
+		ret = 64 / 8;
+		break;
+	case DEVSZ_128:
+		ret = 128 / 8;
+		break;
+	case DEVSZ_256:
+		ret = 256 / 8;
+		break;
+	case DEVSZ_512:
+		ret = 512 / 8;
+		break;
+	case DEVSZ_1G:
+		ret = 1024 / 8;
+		break;
+	case DEVSZ_2G:
+		ret = 2048 / 8;
+		break;
+	}
+	return ret;
+#endif
+	BUG();
+}
+
+__attribute__((weak))
+void __init native_machine_early_platform_add_devices(void)
+{
+}
+
+#ifdef CONFIG_BF60x
+static inline u_long bfin_get_clk(char *name)
+{
+	struct clk *clk;
+	u_long clk_rate;
+
+	clk = clk_get(NULL, name);
+	if (IS_ERR(clk))
+		return 0;
+
+	clk_rate = clk_get_rate(clk);
+	clk_put(clk);
+	return clk_rate;
+}
+#endif
+
+void __init setup_arch(char **cmdline_p)
+{
+	u32 mmr;
+	unsigned long sclk, cclk;
+
+	native_machine_early_platform_add_devices();
+
+	enable_shadow_console();
+
+	/* Check to make sure we are running on the right processor */
+	mmr =  bfin_cpuid();
+	if (unlikely(CPUID != bfin_cpuid()))
+		printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
+			CPU, bfin_cpuid(), bfin_revid());
+
+#ifdef CONFIG_DUMMY_CONSOLE
+	conswitchp = &dummy_con;
+#endif
+
+#if defined(CONFIG_CMDLINE_BOOL)
+	strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
+	command_line[sizeof(command_line) - 1] = 0;
+#endif
+
+	/* Keep a copy of command line */
+	*cmdline_p = &command_line[0];
+	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
+
+	memset(&bfin_memmap, 0, sizeof(bfin_memmap));
+
+#ifdef CONFIG_BF60x
+	/* Should init clock device before parse command early */
+	clk_init();
+#endif
+	/* If the user does not specify things on the command line, use
+	 * what the bootloader set things up as
+	 */
+	physical_mem_end = 0;
+	parse_cmdline_early(&command_line[0]);
+
+	if (_ramend == 0)
+		_ramend = get_mem_size() * 1024 * 1024;
+
+	if (physical_mem_end == 0)
+		physical_mem_end = _ramend;
+
+	memory_setup();
+
+#ifndef CONFIG_BF60x
+	/* Initialize Async memory banks */
+	bfin_write_EBIU_AMBCTL0(AMBCTL0VAL);
+	bfin_write_EBIU_AMBCTL1(AMBCTL1VAL);
+	bfin_write_EBIU_AMGCTL(AMGCTLVAL);
+#ifdef CONFIG_EBIU_MBSCTLVAL
+	bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTLVAL);
+	bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL);
+	bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL);
+#endif
+#endif
+#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL
+	bfin_write_PORTF_HYSTERESIS(HYST_PORTF_0_15);
+	bfin_write_PORTG_HYSTERESIS(HYST_PORTG_0_15);
+	bfin_write_PORTH_HYSTERESIS(HYST_PORTH_0_15);
+	bfin_write_MISCPORT_HYSTERESIS((bfin_read_MISCPORT_HYSTERESIS() &
+					~HYST_NONEGPIO_MASK) | HYST_NONEGPIO);
+#endif
+
+	cclk = get_cclk();
+	sclk = get_sclk();
+
+	if ((ANOMALY_05000273 || ANOMALY_05000274) && (cclk >> 1) < sclk)
+		panic("ANOMALY 05000273 or 05000274: CCLK must be >= 2*SCLK");
+
+#ifdef BF561_FAMILY
+	if (ANOMALY_05000266) {
+		bfin_read_IMDMA_D0_IRQ_STATUS();
+		bfin_read_IMDMA_D1_IRQ_STATUS();
+	}
+#endif
+
+	mmr = bfin_read_TBUFCTL();
+	printk(KERN_INFO "Hardware Trace %s and %sabled\n",
+		(mmr & 0x1) ? "active" : "off",
+		(mmr & 0x2) ? "en" : "dis");
+#ifndef CONFIG_BF60x
+	mmr = bfin_read_SYSCR();
+	printk(KERN_INFO "Boot Mode: %i\n", mmr & 0xF);
+
+	/* Newer parts mirror SWRST bits in SYSCR */
+#if defined(CONFIG_BF53x) || defined(CONFIG_BF561) || \
+    defined(CONFIG_BF538) || defined(CONFIG_BF539)
+	_bfin_swrst = bfin_read_SWRST();
+#else
+	/* Clear boot mode field */
+	_bfin_swrst = mmr & ~0xf;
+#endif
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
+	bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT);
+#endif
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_RESET
+	bfin_write_SWRST(_bfin_swrst | DOUBLE_FAULT);
+#endif
+
+#ifdef CONFIG_SMP
+	if (_bfin_swrst & SWRST_DBL_FAULT_A) {
+#else
+	if (_bfin_swrst & RESET_DOUBLE) {
+#endif
+		printk(KERN_EMERG "Recovering from DOUBLE FAULT event\n");
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+		/* We assume the crashing kernel, and the current symbol table match */
+		printk(KERN_EMERG " While handling exception (EXCAUSE = %#x) at %pF\n",
+			initial_pda.seqstat_doublefault & SEQSTAT_EXCAUSE,
+			initial_pda.retx_doublefault);
+		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %pF\n",
+			initial_pda.dcplb_doublefault_addr);
+		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %pF\n",
+			initial_pda.icplb_doublefault_addr);
+#endif
+		printk(KERN_NOTICE " The instruction at %pF caused a double exception\n",
+			initial_pda.retx);
+	} else if (_bfin_swrst & RESET_WDOG)
+		printk(KERN_INFO "Recovering from Watchdog event\n");
+	else if (_bfin_swrst & RESET_SOFTWARE)
+		printk(KERN_NOTICE "Reset caused by Software reset\n");
+#endif
+	printk(KERN_INFO "Blackfin support (C) 2004-2010 Analog Devices, Inc.\n");
+	if (bfin_compiled_revid() == 0xffff)
+		printk(KERN_INFO "Compiled for ADSP-%s Rev any, running on 0.%d\n", CPU, bfin_revid());
+	else if (bfin_compiled_revid() == -1)
+		printk(KERN_INFO "Compiled for ADSP-%s Rev none\n", CPU);
+	else
+		printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
+
+	if (likely(CPUID == bfin_cpuid())) {
+		if (bfin_revid() != bfin_compiled_revid()) {
+			if (bfin_compiled_revid() == -1)
+				printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
+				       bfin_revid());
+			else if (bfin_compiled_revid() != 0xffff) {
+				printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
+				       bfin_compiled_revid(), bfin_revid());
+				if (bfin_compiled_revid() > bfin_revid())
+					panic("Error: you are missing anomaly workarounds for this rev");
+			}
+		}
+		if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
+			printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
+			       CPU, bfin_revid());
+	}
+
+	printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
+
+#ifdef CONFIG_BF60x
+	printk(KERN_INFO "Processor Speed: %lu MHz core clock, %lu MHz SCLk, %lu MHz SCLK0, %lu MHz SCLK1 and %lu MHz DCLK\n",
+		cclk / 1000000, bfin_get_clk("SYSCLK") / 1000000, get_sclk0() / 1000000, get_sclk1() / 1000000, get_dclk() / 1000000);
+#else
+	printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
+	       cclk / 1000000, sclk / 1000000);
+#endif
+
+	setup_bootmem_allocator();
+
+	paging_init();
+
+	/* Copy atomic sequences to their fixed location, and sanity check that
+	   these locations are the ones that we advertise to userspace.  */
+	memcpy((void *)FIXED_CODE_START, &fixed_code_start,
+	       FIXED_CODE_END - FIXED_CODE_START);
+	BUG_ON((char *)&sigreturn_stub - (char *)&fixed_code_start
+	       != SIGRETURN_STUB - FIXED_CODE_START);
+	BUG_ON((char *)&atomic_xchg32 - (char *)&fixed_code_start
+	       != ATOMIC_XCHG32 - FIXED_CODE_START);
+	BUG_ON((char *)&atomic_cas32 - (char *)&fixed_code_start
+	       != ATOMIC_CAS32 - FIXED_CODE_START);
+	BUG_ON((char *)&atomic_add32 - (char *)&fixed_code_start
+	       != ATOMIC_ADD32 - FIXED_CODE_START);
+	BUG_ON((char *)&atomic_sub32 - (char *)&fixed_code_start
+	       != ATOMIC_SUB32 - FIXED_CODE_START);
+	BUG_ON((char *)&atomic_ior32 - (char *)&fixed_code_start
+	       != ATOMIC_IOR32 - FIXED_CODE_START);
+	BUG_ON((char *)&atomic_and32 - (char *)&fixed_code_start
+	       != ATOMIC_AND32 - FIXED_CODE_START);
+	BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start
+	       != ATOMIC_XOR32 - FIXED_CODE_START);
+	BUG_ON((char *)&safe_user_instruction - (char *)&fixed_code_start
+		!= SAFE_USER_INSTRUCTION - FIXED_CODE_START);
+
+#ifdef CONFIG_SMP
+	platform_init_cpus();
+#endif
+	init_exception_vectors();
+	bfin_cache_init();	/* Initialize caches for the boot CPU */
+#ifdef CONFIG_SCB_PRIORITY
+	init_scb();
+#endif
+}
+
+static int __init topology_init(void)
+{
+	unsigned int cpu;
+
+	for_each_possible_cpu(cpu) {
+		register_cpu(&per_cpu(cpu_data, cpu).cpu, cpu);
+	}
+
+	return 0;
+}
+
+subsys_initcall(topology_init);
+
+/* Get the input clock frequency */
+static u_long cached_clkin_hz = CONFIG_CLKIN_HZ;
+#ifndef CONFIG_BF60x
+static u_long get_clkin_hz(void)
+{
+	return cached_clkin_hz;
+}
+#endif
+static int __init early_init_clkin_hz(char *buf)
+{
+	cached_clkin_hz = simple_strtoul(buf, NULL, 0);
+#ifdef BFIN_KERNEL_CLOCK
+	if (cached_clkin_hz != CONFIG_CLKIN_HZ)
+		panic("cannot change clkin_hz when reprogramming clocks");
+#endif
+	return 1;
+}
+early_param("clkin_hz=", early_init_clkin_hz);
+
+#ifndef CONFIG_BF60x
+/* Get the voltage input multiplier */
+static u_long get_vco(void)
+{
+	static u_long cached_vco;
+	u_long msel, pll_ctl;
+
+	/* The assumption here is that VCO never changes at runtime.
+	 * If, someday, we support that, then we'll have to change this.
+	 */
+	if (cached_vco)
+		return cached_vco;
+
+	pll_ctl = bfin_read_PLL_CTL();
+	msel = (pll_ctl >> 9) & 0x3F;
+	if (0 == msel)
+		msel = 64;
+
+	cached_vco = get_clkin_hz();
+	cached_vco >>= (1 & pll_ctl);	/* DF bit */
+	cached_vco *= msel;
+	return cached_vco;
+}
+#endif
+
+/* Get the Core clock */
+u_long get_cclk(void)
+{
+#ifdef CONFIG_BF60x
+	return bfin_get_clk("CCLK");
+#else
+	static u_long cached_cclk_pll_div, cached_cclk;
+	u_long csel, ssel;
+
+	if (bfin_read_PLL_STAT() & 0x1)
+		return get_clkin_hz();
+
+	ssel = bfin_read_PLL_DIV();
+	if (ssel == cached_cclk_pll_div)
+		return cached_cclk;
+	else
+		cached_cclk_pll_div = ssel;
+
+	csel = ((ssel >> 4) & 0x03);
+	ssel &= 0xf;
+	if (ssel && ssel < (1 << csel))	/* SCLK > CCLK */
+		cached_cclk = get_vco() / ssel;
+	else
+		cached_cclk = get_vco() >> csel;
+	return cached_cclk;
+#endif
+}
+EXPORT_SYMBOL(get_cclk);
+
+#ifdef CONFIG_BF60x
+/* Get the bf60x clock of SCLK0 domain */
+u_long get_sclk0(void)
+{
+	return bfin_get_clk("SCLK0");
+}
+EXPORT_SYMBOL(get_sclk0);
+
+/* Get the bf60x clock of SCLK1 domain */
+u_long get_sclk1(void)
+{
+	return bfin_get_clk("SCLK1");
+}
+EXPORT_SYMBOL(get_sclk1);
+
+/* Get the bf60x DRAM clock */
+u_long get_dclk(void)
+{
+	return bfin_get_clk("DCLK");
+}
+EXPORT_SYMBOL(get_dclk);
+#endif
+
+/* Get the default system clock */
+u_long get_sclk(void)
+{
+#ifdef CONFIG_BF60x
+	return get_sclk0();
+#else
+	static u_long cached_sclk;
+	u_long ssel;
+
+	/* The assumption here is that SCLK never changes at runtime.
+	 * If, someday, we support that, then we'll have to change this.
+	 */
+	if (cached_sclk)
+		return cached_sclk;
+
+	if (bfin_read_PLL_STAT() & 0x1)
+		return get_clkin_hz();
+
+	ssel = bfin_read_PLL_DIV() & 0xf;
+	if (0 == ssel) {
+		printk(KERN_WARNING "Invalid System Clock\n");
+		ssel = 1;
+	}
+
+	cached_sclk = get_vco() / ssel;
+	return cached_sclk;
+#endif
+}
+EXPORT_SYMBOL(get_sclk);
+
+unsigned long sclk_to_usecs(unsigned long sclk)
+{
+	u64 tmp = USEC_PER_SEC * (u64)sclk;
+	do_div(tmp, get_sclk());
+	return tmp;
+}
+EXPORT_SYMBOL(sclk_to_usecs);
+
+unsigned long usecs_to_sclk(unsigned long usecs)
+{
+	u64 tmp = get_sclk() * (u64)usecs;
+	do_div(tmp, USEC_PER_SEC);
+	return tmp;
+}
+EXPORT_SYMBOL(usecs_to_sclk);
+
+/*
+ *	Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	char *cpu, *mmu, *fpu, *vendor, *cache;
+	uint32_t revid;
+	int cpu_num = *(unsigned int *)v;
+	u_long sclk, cclk;
+	u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0;
+	struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu_num);
+
+	cpu = CPU;
+	mmu = "none";
+	fpu = "none";
+	revid = bfin_revid();
+
+	sclk = get_sclk();
+	cclk = get_cclk();
+
+	switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE) {
+	case 0xca:
+		vendor = "Analog Devices";
+		break;
+	default:
+		vendor = "unknown";
+		break;
+	}
+
+	seq_printf(m, "processor\t: %d\n" "vendor_id\t: %s\n", cpu_num, vendor);
+
+	if (CPUID == bfin_cpuid())
+		seq_printf(m, "cpu family\t: 0x%04x\n", CPUID);
+	else
+		seq_printf(m, "cpu family\t: Compiled for:0x%04x, running on:0x%04x\n",
+			CPUID, bfin_cpuid());
+
+	seq_printf(m, "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
+		"stepping\t: %d ",
+		cpu, cclk/1000000, sclk/1000000,
+#ifdef CONFIG_MPU
+		"mpu on",
+#else
+		"mpu off",
+#endif
+		revid);
+
+	if (bfin_revid() != bfin_compiled_revid()) {
+		if (bfin_compiled_revid() == -1)
+			seq_printf(m, "(Compiled for Rev none)");
+		else if (bfin_compiled_revid() == 0xffff)
+			seq_printf(m, "(Compiled for Rev any)");
+		else
+			seq_printf(m, "(Compiled for Rev %d)", bfin_compiled_revid());
+	}
+
+	seq_printf(m, "\ncpu MHz\t\t: %lu.%06lu/%lu.%06lu\n",
+		cclk/1000000, cclk%1000000,
+		sclk/1000000, sclk%1000000);
+	seq_printf(m, "bogomips\t: %lu.%02lu\n"
+		"Calibration\t: %lu loops\n",
+		(loops_per_jiffy * HZ) / 500000,
+		((loops_per_jiffy * HZ) / 5000) % 100,
+		(loops_per_jiffy * HZ));
+
+	/* Check Cache configutation */
+	switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) {
+	case ACACHE_BSRAM:
+		cache = "dbank-A/B\t: cache/sram";
+		dcache_size = 16;
+		dsup_banks = 1;
+		break;
+	case ACACHE_BCACHE:
+		cache = "dbank-A/B\t: cache/cache";
+		dcache_size = 32;
+		dsup_banks = 2;
+		break;
+	case ASRAM_BSRAM:
+		cache = "dbank-A/B\t: sram/sram";
+		dcache_size = 0;
+		dsup_banks = 0;
+		break;
+	default:
+		cache = "unknown";
+		dcache_size = 0;
+		dsup_banks = 0;
+		break;
+	}
+
+	/* Is it turned on? */
+	if ((cpudata->dmemctl & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
+		dcache_size = 0;
+
+	if ((cpudata->imemctl & (IMC | ENICPLB)) != (IMC | ENICPLB))
+		icache_size = 0;
+
+	seq_printf(m, "cache size\t: %d KB(L1 icache) "
+		"%d KB(L1 dcache) %d KB(L2 cache)\n",
+		icache_size, dcache_size, 0);
+	seq_printf(m, "%s\n", cache);
+	seq_printf(m, "external memory\t: "
+#if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE)
+		   "cacheable"
+#else
+		   "uncacheable"
+#endif
+		   " in instruction cache\n");
+	seq_printf(m, "external memory\t: "
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK)
+		      "cacheable (write-back)"
+#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH)
+		      "cacheable (write-through)"
+#else
+		      "uncacheable"
+#endif
+		      " in data cache\n");
+
+	if (icache_size)
+		seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
+			   BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
+	else
+		seq_printf(m, "icache setup\t: off\n");
+
+	seq_printf(m,
+		   "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
+		   dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
+		   BFIN_DLINES);
+#ifdef __ARCH_SYNC_CORE_DCACHE
+	seq_printf(m, "dcache flushes\t: %lu\n", dcache_invld_count[cpu_num]);
+#endif
+#ifdef __ARCH_SYNC_CORE_ICACHE
+	seq_printf(m, "icache flushes\t: %lu\n", icache_invld_count[cpu_num]);
+#endif
+
+	seq_printf(m, "\n");
+
+	if (cpu_num != num_possible_cpus() - 1)
+		return 0;
+
+	if (L2_LENGTH) {
+		seq_printf(m, "L2 SRAM\t\t: %dKB\n", L2_LENGTH/0x400);
+		seq_printf(m, "L2 SRAM\t\t: "
+#if defined(CONFIG_BFIN_L2_ICACHEABLE)
+			      "cacheable"
+#else
+			      "uncacheable"
+#endif
+			      " in instruction cache\n");
+		seq_printf(m, "L2 SRAM\t\t: "
+#if defined(CONFIG_BFIN_L2_WRITEBACK)
+			      "cacheable (write-back)"
+#elif defined(CONFIG_BFIN_L2_WRITETHROUGH)
+			      "cacheable (write-through)"
+#else
+			      "uncacheable"
+#endif
+			      " in data cache\n");
+	}
+	seq_printf(m, "board name\t: %s\n", bfin_board_name);
+	seq_printf(m, "board memory\t: %ld kB (0x%08lx -> 0x%08lx)\n",
+		physical_mem_end >> 10, 0ul, physical_mem_end);
+	seq_printf(m, "kernel memory\t: %d kB (0x%08lx -> 0x%08lx)\n",
+		((int)memory_end - (int)_rambase) >> 10,
+		_rambase, memory_end);
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	if (*pos == 0)
+		*pos = cpumask_first(cpu_online_mask);
+	if (*pos >= num_online_cpus())
+		return NULL;
+
+	return pos;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	*pos = cpumask_next(*pos, cpu_online_mask);
+
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+	.start = c_start,
+	.next = c_next,
+	.stop = c_stop,
+	.show = show_cpuinfo,
+};
+
+void __init cmdline_init(const char *r0)
+{
+	early_shadow_stamp();
+	if (r0)
+		strlcpy(command_line, r0, COMMAND_LINE_SIZE);
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/shadow_console.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/shadow_console.c
new file mode 100644
index 0000000..aeb8343
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/shadow_console.c
@@ -0,0 +1,111 @@
+/*
+ * manage a small early shadow of the log buffer which we can pass between the
+ * bootloader so early crash messages are communicated properly and easily
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/string.h>
+#include <asm/blackfin.h>
+#include <asm/irq_handler.h>
+#include <asm/early_printk.h>
+
+#define SHADOW_CONSOLE_START		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x500)
+#define SHADOW_CONSOLE_END		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x1000)
+#define SHADOW_CONSOLE_MAGIC_LOC	(CONFIG_PHY_RAM_BASE_ADDRESS + 0x4F0)
+#define SHADOW_CONSOLE_MAGIC		(0xDEADBEEF)
+
+static __initdata char *shadow_console_buffer = (char *)SHADOW_CONSOLE_START;
+
+__init void early_shadow_write(struct console *con, const char *s,
+				unsigned int n)
+{
+	unsigned int i;
+	/*
+	 * save 2 bytes for the double null at the end
+	 * once we fail on a long line, make sure we don't write a short line afterwards
+	 */
+	if ((shadow_console_buffer + n) <= (char *)(SHADOW_CONSOLE_END - 2)) {
+		/* can't use memcpy - it may not be relocated yet */
+		for (i = 0; i <= n; i++)
+			shadow_console_buffer[i] = s[i];
+		shadow_console_buffer += n;
+		shadow_console_buffer[0] = 0;
+		shadow_console_buffer[1] = 0;
+	} else
+		shadow_console_buffer = (char *)SHADOW_CONSOLE_END;
+}
+
+static __initdata struct console early_shadow_console = {
+	.name = "early_shadow",
+	.write = early_shadow_write,
+	.flags = CON_BOOT | CON_PRINTBUFFER,
+	.index = -1,
+	.device = 0,
+};
+
+__init int shadow_console_enabled(void)
+{
+	return early_shadow_console.flags & CON_ENABLED;
+}
+
+__init void mark_shadow_error(void)
+{
+	int *loc = (int *)SHADOW_CONSOLE_MAGIC_LOC;
+	loc[0] = SHADOW_CONSOLE_MAGIC;
+	loc[1] = SHADOW_CONSOLE_START;
+}
+
+__init void enable_shadow_console(void)
+{
+	if (!shadow_console_enabled()) {
+		register_console(&early_shadow_console);
+		/* for now, assume things are going to fail */
+		mark_shadow_error();
+	}
+}
+
+static __init int disable_shadow_console(void)
+{
+	/*
+	 * by the time pure_initcall runs, the standard console is enabled,
+	 * and the early_console is off, so unset the magic numbers
+	 * unregistering the console is taken care of in common code (See
+	 * ./kernel/printk:disable_boot_consoles() )
+	 */
+	int *loc = (int *)SHADOW_CONSOLE_MAGIC_LOC;
+
+	loc[0] = 0;
+
+	return 0;
+}
+pure_initcall(disable_shadow_console);
+
+/*
+ * since we can't use printk, dump numbers (as hex), n = # bits
+ */
+__init void early_shadow_reg(unsigned long reg, unsigned int n)
+{
+	/*
+	 * can't use any "normal" kernel features, since thay
+	 * may not be relocated to their execute address yet
+	 */
+	int i;
+	char ascii[11] = " 0x";
+
+	n = n / 4;
+	reg = reg << ((8 - n) * 4);
+	n += 3;
+
+	for (i = 3; i <= n ; i++) {
+		ascii[i] = hex_asc_lo(reg >> 28);
+		reg <<= 4;
+	}
+	early_shadow_write(NULL, ascii, n);
+
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/signal.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/signal.c
new file mode 100644
index 0000000..5f51727
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/signal.c
@@ -0,0 +1,287 @@
+/*
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/signal.h>
+#include <linux/syscalls.h>
+#include <linux/ptrace.h>
+#include <linux/tty.h>
+#include <linux/personality.h>
+#include <linux/binfmts.h>
+#include <linux/uaccess.h>
+#include <linux/tracehook.h>
+#include <linux/sched/task_stack.h>
+
+#include <asm/cacheflush.h>
+#include <asm/ucontext.h>
+#include <asm/fixed_code.h>
+#include <asm/syscall.h>
+
+/* Location of the trace bit in SYSCFG. */
+#define TRACE_BITS 0x0001
+
+struct fdpic_func_descriptor {
+	unsigned long	text;
+	unsigned long	GOT;
+};
+
+struct rt_sigframe {
+	int sig;
+	struct siginfo *pinfo;
+	void *puc;
+	/* This is no longer needed by the kernel, but unfortunately userspace
+	 * code expects it to be there.  */
+	char retcode[8];
+	struct siginfo info;
+	struct ucontext uc;
+};
+
+static inline int
+rt_restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *pr0)
+{
+	unsigned long usp = 0;
+	int err = 0;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current->restart_block.fn = do_no_restart_syscall;
+
+#define RESTORE(x) err |= __get_user(regs->x, &sc->sc_##x)
+
+	/* restore passed registers */
+	RESTORE(r0); RESTORE(r1); RESTORE(r2); RESTORE(r3);
+	RESTORE(r4); RESTORE(r5); RESTORE(r6); RESTORE(r7);
+	RESTORE(p0); RESTORE(p1); RESTORE(p2); RESTORE(p3);
+	RESTORE(p4); RESTORE(p5);
+	err |= __get_user(usp, &sc->sc_usp);
+	wrusp(usp);
+	RESTORE(a0w); RESTORE(a1w);
+	RESTORE(a0x); RESTORE(a1x);
+	RESTORE(astat);
+	RESTORE(rets);
+	RESTORE(pc);
+	RESTORE(retx);
+	RESTORE(fp);
+	RESTORE(i0); RESTORE(i1); RESTORE(i2); RESTORE(i3);
+	RESTORE(m0); RESTORE(m1); RESTORE(m2); RESTORE(m3);
+	RESTORE(l0); RESTORE(l1); RESTORE(l2); RESTORE(l3);
+	RESTORE(b0); RESTORE(b1); RESTORE(b2); RESTORE(b3);
+	RESTORE(lc0); RESTORE(lc1);
+	RESTORE(lt0); RESTORE(lt1);
+	RESTORE(lb0); RESTORE(lb1);
+	RESTORE(seqstat);
+
+	regs->orig_p0 = -1;	/* disable syscall checks */
+
+	*pr0 = regs->r0;
+	return err;
+}
+
+asmlinkage int sys_rt_sigreturn(void)
+{
+	struct pt_regs *regs = current_pt_regs();
+	unsigned long usp = rdusp();
+	struct rt_sigframe *frame = (struct rt_sigframe *)(usp);
+	sigset_t set;
+	int r0;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	set_current_blocked(&set);
+
+	if (rt_restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+		goto badframe;
+
+	if (restore_altstack(&frame->uc.uc_stack))
+		goto badframe;
+
+	return r0;
+
+ badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+static inline int rt_setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs)
+{
+	int err = 0;
+
+#define SETUP(x) err |= __put_user(regs->x, &sc->sc_##x)
+
+	SETUP(r0); SETUP(r1); SETUP(r2); SETUP(r3);
+	SETUP(r4); SETUP(r5); SETUP(r6); SETUP(r7);
+	SETUP(p0); SETUP(p1); SETUP(p2); SETUP(p3);
+	SETUP(p4); SETUP(p5);
+	err |= __put_user(rdusp(), &sc->sc_usp);
+	SETUP(a0w); SETUP(a1w);
+	SETUP(a0x); SETUP(a1x);
+	SETUP(astat);
+	SETUP(rets);
+	SETUP(pc);
+	SETUP(retx);
+	SETUP(fp);
+	SETUP(i0); SETUP(i1); SETUP(i2); SETUP(i3);
+	SETUP(m0); SETUP(m1); SETUP(m2); SETUP(m3);
+	SETUP(l0); SETUP(l1); SETUP(l2); SETUP(l3);
+	SETUP(b0); SETUP(b1); SETUP(b2); SETUP(b3);
+	SETUP(lc0); SETUP(lc1);
+	SETUP(lt0); SETUP(lt1);
+	SETUP(lb0); SETUP(lb1);
+	SETUP(seqstat);
+
+	return err;
+}
+
+static inline void *get_sigframe(struct ksignal *ksig,
+				 size_t frame_size)
+{
+	unsigned long usp = sigsp(rdusp(), ksig);
+
+	return (void *)((usp - frame_size) & -8UL);
+}
+
+static int
+setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
+{
+	struct rt_sigframe *frame;
+	int err = 0;
+
+	frame = get_sigframe(ksig, sizeof(*frame));
+
+	err |= __put_user(ksig->sig, &frame->sig);
+
+	err |= __put_user(&frame->info, &frame->pinfo);
+	err |= __put_user(&frame->uc, &frame->puc);
+	err |= copy_siginfo_to_user(&frame->info, &ksig->info);
+
+	/* Create the ucontext.  */
+	err |= __put_user(0, &frame->uc.uc_flags);
+	err |= __put_user(0, &frame->uc.uc_link);
+	err |= __save_altstack(&frame->uc.uc_stack, rdusp());
+	err |= rt_setup_sigcontext(&frame->uc.uc_mcontext, regs);
+	err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+	if (err)
+		return -EFAULT;
+
+	/* Set up registers for signal handler */
+	if (current->personality & FDPIC_FUNCPTRS) {
+		struct fdpic_func_descriptor __user *funcptr =
+			(struct fdpic_func_descriptor *) ksig->ka.sa.sa_handler;
+		u32 pc, p3;
+		err |= __get_user(pc, &funcptr->text);
+		err |= __get_user(p3, &funcptr->GOT);
+		if (err)
+			return -EFAULT;
+		regs->pc = pc;
+		regs->p3 = p3;
+	} else
+		regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
+	wrusp((unsigned long)frame);
+	regs->rets = SIGRETURN_STUB;
+
+	regs->r0 = frame->sig;
+	regs->r1 = (unsigned long)(&frame->info);
+	regs->r2 = (unsigned long)(&frame->uc);
+
+	return 0;
+}
+
+static inline void
+handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
+{
+	switch (regs->r0) {
+	case -ERESTARTNOHAND:
+		if (!has_handler)
+			goto do_restart;
+		regs->r0 = -EINTR;
+		break;
+
+	case -ERESTARTSYS:
+		if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
+			regs->r0 = -EINTR;
+			break;
+		}
+		/* fallthrough */
+	case -ERESTARTNOINTR:
+ do_restart:
+		regs->p0 = regs->orig_p0;
+		regs->r0 = regs->orig_r0;
+		regs->pc -= 2;
+		break;
+
+	case -ERESTART_RESTARTBLOCK:
+		regs->p0 = __NR_restart_syscall;
+		regs->pc -= 2;
+		break;
+	}
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+static void
+handle_signal(struct ksignal *ksig, struct pt_regs *regs)
+{
+	int ret;
+
+	/* are we from a system call? to see pt_regs->orig_p0 */
+	if (regs->orig_p0 >= 0)
+		/* If so, check system call restarting.. */
+		handle_restart(regs, &ksig->ka, 1);
+
+	/* set up the stack frame */
+	ret = setup_rt_frame(ksig, sigmask_to_save(), regs);
+
+	signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals
+ * that the kernel can handle, and then we build all the user-level signal
+ * handling stack-frames in one go after that.
+ */
+asmlinkage void do_signal(struct pt_regs *regs)
+{
+	struct ksignal ksig;
+
+	current->thread.esp0 = (unsigned long)regs;
+
+	if (get_signal(&ksig)) {
+		/* Whee!  Actually deliver the signal.  */
+		handle_signal(&ksig, regs);
+		return;
+	}
+
+	/* Did we come from a system call? */
+	if (regs->orig_p0 >= 0)
+		/* Restart the system call - no handlers present */
+		handle_restart(regs, NULL, 0);
+
+	/* if there's no signal to deliver, we just put the saved sigmask
+	 * back */
+	restore_saved_sigmask();
+}
+
+/*
+ * notification of userspace execution resumption
+ */
+asmlinkage void do_notify_resume(struct pt_regs *regs)
+{
+	if (test_thread_flag(TIF_SIGPENDING))
+		do_signal(regs);
+
+	if (test_thread_flag(TIF_NOTIFY_RESUME)) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+}
+
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/stacktrace.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/stacktrace.c
new file mode 100644
index 0000000..17198f3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/stacktrace.c
@@ -0,0 +1,54 @@
+/*
+ * Blackfin stacktrace code (mostly copied from avr32)
+ *
+ * Copyright 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <linux/stacktrace.h>
+#include <linux/thread_info.h>
+#include <linux/module.h>
+
+register unsigned long current_frame_pointer asm("FP");
+
+struct stackframe {
+	unsigned long fp;
+	unsigned long rets;
+};
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer.
+ */
+void save_stack_trace(struct stack_trace *trace)
+{
+	unsigned long low, high;
+	unsigned long fp;
+	struct stackframe *frame;
+	int skip = trace->skip;
+
+	low = (unsigned long)task_stack_page(current);
+	high = low + THREAD_SIZE;
+	fp = current_frame_pointer;
+
+	while (fp >= low && fp <= (high - sizeof(*frame))) {
+		frame = (struct stackframe *)fp;
+
+		if (skip) {
+			skip--;
+		} else {
+			trace->entries[trace->nr_entries++] = frame->rets;
+			if (trace->nr_entries >= trace->max_entries)
+				break;
+		}
+
+		/*
+		 * The next frame must be at a higher address than the
+		 * current frame.
+		 */
+		low = fp + sizeof(*frame);
+		fp = frame->fp;
+	}
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/sys_bfin.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/sys_bfin.c
new file mode 100644
index 0000000..d998383
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/sys_bfin.c
@@ -0,0 +1,88 @@
+/*
+ * contains various random system calls that have a non-standard
+ * calling sequence on the Linux/Blackfin platform.
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/spinlock.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/syscalls.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/ipc.h>
+#include <linux/unistd.h>
+
+#include <asm/cacheflush.h>
+#include <asm/dma.h>
+#include <asm/cachectl.h>
+#include <asm/ptrace.h>
+
+asmlinkage void *sys_sram_alloc(size_t size, unsigned long flags)
+{
+	return sram_alloc_with_lsl(size, flags);
+}
+
+asmlinkage int sys_sram_free(const void *addr)
+{
+	return sram_free_with_lsl(addr);
+}
+
+asmlinkage void *sys_dma_memcpy(void *dest, const void *src, size_t len)
+{
+	return safe_dma_memcpy(dest, src, len);
+}
+
+#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE)
+#include <linux/fb.h>
+#include <linux/export.h>
+unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr,
+	unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+	struct fb_info *info = filp->private_data;
+	return (unsigned long)info->screen_base;
+}
+EXPORT_SYMBOL(get_fb_unmapped_area);
+#endif
+
+/* Needed for legacy userspace atomic emulation */
+static DEFINE_SPINLOCK(bfin_spinlock_lock);
+
+#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
+__attribute__((l1_text))
+#endif
+asmlinkage int sys_bfin_spinlock(int *p)
+{
+	int ret, tmp = 0;
+
+	spin_lock(&bfin_spinlock_lock); /* This would also hold kernel preemption. */
+	ret = get_user(tmp, p);
+	if (likely(ret == 0)) {
+		if (unlikely(tmp))
+			ret = 1;
+		else
+			put_user(1, p);
+	}
+	spin_unlock(&bfin_spinlock_lock);
+
+	return ret;
+}
+
+SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, len, int, op)
+{
+	if (is_user_addr_valid(current, addr, len) != 0)
+		return -EINVAL;
+
+	if (op & DCACHE)
+		blackfin_dcache_flush_range(addr, addr + len);
+	if (op & ICACHE)
+		blackfin_icache_flush_range(addr, addr + len);
+
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/time-ts.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/time-ts.c
new file mode 100644
index 0000000..0135055
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/time-ts.c
@@ -0,0 +1,400 @@
+/*
+ * Based on arm clockevents implementation and old bfin time tick.
+ *
+ * Copyright 2008-2009 Analog Devics Inc.
+ *                2008 GeoTechnologies
+ *                     Vitja Makarov
+ *
+ * Licensed under the GPL-2
+ */
+
+#include <linux/module.h>
+#include <linux/profile.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/irq.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpufreq.h>
+
+#include <asm/blackfin.h>
+#include <asm/time.h>
+#include <asm/gptimers.h>
+#include <asm/nmi.h>
+
+
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
+
+static notrace u64 bfin_read_cycles(struct clocksource *cs)
+{
+#ifdef CONFIG_CPU_FREQ
+	return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
+#else
+	return get_cycles();
+#endif
+}
+
+static struct clocksource bfin_cs_cycles = {
+	.name		= "bfin_cs_cycles",
+	.rating		= 400,
+	.read		= bfin_read_cycles,
+	.mask		= CLOCKSOURCE_MASK(64),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static inline unsigned long long bfin_cs_cycles_sched_clock(void)
+{
+	return clocksource_cyc2ns(bfin_read_cycles(&bfin_cs_cycles),
+		bfin_cs_cycles.mult, bfin_cs_cycles.shift);
+}
+
+static int __init bfin_cs_cycles_init(void)
+{
+	if (clocksource_register_hz(&bfin_cs_cycles, get_cclk()))
+		panic("failed to register clocksource");
+
+	return 0;
+}
+#else
+# define bfin_cs_cycles_init()
+#endif
+
+#ifdef CONFIG_GPTMR0_CLOCKSOURCE
+
+void __init setup_gptimer0(void)
+{
+	disable_gptimers(TIMER0bit);
+
+#ifdef CONFIG_BF60x
+	bfin_write16(TIMER_DATA_IMSK, 0);
+	set_gptimer_config(TIMER0_id,  TIMER_OUT_DIS
+		| TIMER_MODE_PWM_CONT | TIMER_PULSE_HI | TIMER_IRQ_PER);
+#else
+	set_gptimer_config(TIMER0_id, \
+		TIMER_OUT_DIS | TIMER_PERIOD_CNT | TIMER_MODE_PWM);
+#endif
+	set_gptimer_period(TIMER0_id, -1);
+	set_gptimer_pwidth(TIMER0_id, -2);
+	SSYNC();
+	enable_gptimers(TIMER0bit);
+}
+
+static u64 bfin_read_gptimer0(struct clocksource *cs)
+{
+	return bfin_read_TIMER0_COUNTER();
+}
+
+static struct clocksource bfin_cs_gptimer0 = {
+	.name		= "bfin_cs_gptimer0",
+	.rating		= 350,
+	.read		= bfin_read_gptimer0,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static inline unsigned long long bfin_cs_gptimer0_sched_clock(void)
+{
+	return clocksource_cyc2ns(bfin_read_TIMER0_COUNTER(),
+		bfin_cs_gptimer0.mult, bfin_cs_gptimer0.shift);
+}
+
+static int __init bfin_cs_gptimer0_init(void)
+{
+	setup_gptimer0();
+
+	if (clocksource_register_hz(&bfin_cs_gptimer0, get_sclk()))
+		panic("failed to register clocksource");
+
+	return 0;
+}
+#else
+# define bfin_cs_gptimer0_init()
+#endif
+
+#if defined(CONFIG_GPTMR0_CLOCKSOURCE) || defined(CONFIG_CYCLES_CLOCKSOURCE)
+/* prefer to use cycles since it has higher rating */
+notrace unsigned long long sched_clock(void)
+{
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
+	return bfin_cs_cycles_sched_clock();
+#else
+	return bfin_cs_gptimer0_sched_clock();
+#endif
+}
+#endif
+
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
+static int bfin_gptmr0_set_next_event(unsigned long cycles,
+                                     struct clock_event_device *evt)
+{
+	disable_gptimers(TIMER0bit);
+
+	/* it starts counting three SCLK cycles after the TIMENx bit is set */
+	set_gptimer_pwidth(TIMER0_id, cycles - 3);
+	enable_gptimers(TIMER0bit);
+	return 0;
+}
+
+static int bfin_gptmr0_set_periodic(struct clock_event_device *evt)
+{
+#ifndef CONFIG_BF60x
+	set_gptimer_config(TIMER0_id,
+			   TIMER_OUT_DIS | TIMER_IRQ_ENA |
+			   TIMER_PERIOD_CNT | TIMER_MODE_PWM);
+#else
+	set_gptimer_config(TIMER0_id,
+			   TIMER_OUT_DIS | TIMER_MODE_PWM_CONT |
+			   TIMER_PULSE_HI | TIMER_IRQ_PER);
+#endif
+
+	set_gptimer_period(TIMER0_id, get_sclk() / HZ);
+	set_gptimer_pwidth(TIMER0_id, get_sclk() / HZ - 1);
+	enable_gptimers(TIMER0bit);
+	return 0;
+}
+
+static int bfin_gptmr0_set_oneshot(struct clock_event_device *evt)
+{
+	disable_gptimers(TIMER0bit);
+#ifndef CONFIG_BF60x
+	set_gptimer_config(TIMER0_id,
+			   TIMER_OUT_DIS | TIMER_IRQ_ENA | TIMER_MODE_PWM);
+#else
+	set_gptimer_config(TIMER0_id,
+			   TIMER_OUT_DIS | TIMER_MODE_PWM | TIMER_PULSE_HI |
+			   TIMER_IRQ_WID_DLY);
+#endif
+
+	set_gptimer_period(TIMER0_id, 0);
+	return 0;
+}
+
+static int bfin_gptmr0_shutdown(struct clock_event_device *evt)
+{
+	disable_gptimers(TIMER0bit);
+	return 0;
+}
+
+static void bfin_gptmr0_ack(void)
+{
+	clear_gptimer_intr(TIMER0_id);
+}
+
+static void __init bfin_gptmr0_init(void)
+{
+	disable_gptimers(TIMER0bit);
+}
+
+#ifdef CONFIG_CORE_TIMER_IRQ_L1
+__attribute__((l1_text))
+#endif
+irqreturn_t bfin_gptmr0_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+	smp_mb();
+	/*
+	 * We want to ACK before we handle so that we can handle smaller timer
+	 * intervals.  This way if the timer expires again while we're handling
+	 * things, we're more likely to see that 2nd int rather than swallowing
+	 * it by ACKing the int at the end of this handler.
+	 */
+	bfin_gptmr0_ack();
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction gptmr0_irq = {
+	.name		= "Blackfin GPTimer0",
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL | IRQF_PERCPU,
+	.handler	= bfin_gptmr0_interrupt,
+};
+
+static struct clock_event_device clockevent_gptmr0 = {
+	.name			= "bfin_gptimer0",
+	.rating			= 300,
+	.irq			= IRQ_TIMER0,
+	.shift			= 32,
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event		= bfin_gptmr0_set_next_event,
+	.set_state_shutdown	= bfin_gptmr0_shutdown,
+	.set_state_periodic	= bfin_gptmr0_set_periodic,
+	.set_state_oneshot	= bfin_gptmr0_set_oneshot,
+};
+
+static void __init bfin_gptmr0_clockevent_init(struct clock_event_device *evt)
+{
+	unsigned long clock_tick;
+
+	clock_tick = get_sclk();
+	evt->mult = div_sc(clock_tick, NSEC_PER_SEC, evt->shift);
+	evt->max_delta_ns = clockevent_delta2ns(-1, evt);
+	evt->max_delta_ticks = (unsigned long)-1;
+	evt->min_delta_ns = clockevent_delta2ns(100, evt);
+	evt->min_delta_ticks = 100;
+
+	evt->cpumask = cpumask_of(0);
+
+	clockevents_register_device(evt);
+}
+#endif /* CONFIG_TICKSOURCE_GPTMR0 */
+
+#if defined(CONFIG_TICKSOURCE_CORETMR)
+/* per-cpu local core timer */
+DEFINE_PER_CPU(struct clock_event_device, coretmr_events);
+
+static int bfin_coretmr_set_next_event(unsigned long cycles,
+				struct clock_event_device *evt)
+{
+	bfin_write_TCNTL(TMPWR);
+	CSYNC();
+	bfin_write_TCOUNT(cycles);
+	CSYNC();
+	bfin_write_TCNTL(TMPWR | TMREN);
+	return 0;
+}
+
+static int bfin_coretmr_set_periodic(struct clock_event_device *evt)
+{
+	unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
+
+	bfin_write_TCNTL(TMPWR);
+	CSYNC();
+	bfin_write_TSCALE(TIME_SCALE - 1);
+	bfin_write_TPERIOD(tcount);
+	bfin_write_TCOUNT(tcount);
+	CSYNC();
+	bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD);
+	return 0;
+}
+
+static int bfin_coretmr_set_oneshot(struct clock_event_device *evt)
+{
+	bfin_write_TCNTL(TMPWR);
+	CSYNC();
+	bfin_write_TSCALE(TIME_SCALE - 1);
+	bfin_write_TPERIOD(0);
+	bfin_write_TCOUNT(0);
+	return 0;
+}
+
+static int bfin_coretmr_shutdown(struct clock_event_device *evt)
+{
+	bfin_write_TCNTL(0);
+	CSYNC();
+	return 0;
+}
+
+void bfin_coretmr_init(void)
+{
+	/* power up the timer, but don't enable it just yet */
+	bfin_write_TCNTL(TMPWR);
+	CSYNC();
+
+	/* the TSCALE prescaler counter. */
+	bfin_write_TSCALE(TIME_SCALE - 1);
+	bfin_write_TPERIOD(0);
+	bfin_write_TCOUNT(0);
+
+	CSYNC();
+}
+
+#ifdef CONFIG_CORE_TIMER_IRQ_L1
+__attribute__((l1_text))
+#endif
+
+irqreturn_t bfin_coretmr_interrupt(int irq, void *dev_id)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(coretmr_events, cpu);
+
+	smp_mb();
+	evt->event_handler(evt);
+
+	touch_nmi_watchdog();
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction coretmr_irq = {
+	.name		= "Blackfin CoreTimer",
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL | IRQF_PERCPU,
+	.handler	= bfin_coretmr_interrupt,
+};
+
+void bfin_coretmr_clockevent_init(void)
+{
+	unsigned long clock_tick;
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(coretmr_events, cpu);
+
+#ifdef CONFIG_SMP
+	evt->broadcast = smp_timer_broadcast;
+#endif
+
+	evt->name = "bfin_core_timer";
+	evt->rating = 350;
+	evt->irq = -1;
+	evt->shift = 32;
+	evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	evt->set_next_event = bfin_coretmr_set_next_event;
+	evt->set_state_shutdown = bfin_coretmr_shutdown;
+	evt->set_state_periodic = bfin_coretmr_set_periodic;
+	evt->set_state_oneshot = bfin_coretmr_set_oneshot;
+
+	clock_tick = get_cclk() / TIME_SCALE;
+	evt->mult = div_sc(clock_tick, NSEC_PER_SEC, evt->shift);
+	evt->max_delta_ns = clockevent_delta2ns(-1, evt);
+	evt->max_delta_ticks = (unsigned long)-1;
+	evt->min_delta_ns = clockevent_delta2ns(100, evt);
+	evt->min_delta_ticks = 100;
+
+	evt->cpumask = cpumask_of(cpu);
+
+	clockevents_register_device(evt);
+}
+#endif /* CONFIG_TICKSOURCE_CORETMR */
+
+
+void read_persistent_clock(struct timespec *ts)
+{
+	time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60;	/* 1 Jan 2007 */
+	ts->tv_sec = secs_since_1970;
+	ts->tv_nsec = 0;
+}
+
+void __init time_init(void)
+{
+
+#ifdef CONFIG_RTC_DRV_BFIN
+	/* [#2663] hack to filter junk RTC values that would cause
+	 * userspace to have to deal with time values greater than
+	 * 2^31 seconds (which uClibc cannot cope with yet)
+	 */
+	if ((bfin_read_RTC_STAT() & 0xC0000000) == 0xC0000000) {
+		printk(KERN_NOTICE "bfin-rtc: invalid date; resetting\n");
+		bfin_write_RTC_STAT(0);
+	}
+#endif
+
+	bfin_cs_cycles_init();
+	bfin_cs_gptimer0_init();
+
+#if defined(CONFIG_TICKSOURCE_CORETMR)
+	bfin_coretmr_init();
+	setup_irq(IRQ_CORETMR, &coretmr_irq);
+	bfin_coretmr_clockevent_init();
+#endif
+
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
+	bfin_gptmr0_init();
+	setup_irq(IRQ_TIMER0, &gptmr0_irq);
+	gptmr0_irq.dev_id = &clockevent_gptmr0;
+	bfin_gptmr0_clockevent_init(&clockevent_gptmr0);
+#endif
+
+#if !defined(CONFIG_TICKSOURCE_CORETMR) && !defined(CONFIG_TICKSOURCE_GPTMR0)
+# error at least one clock event device is required
+#endif
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/time.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/time.c
new file mode 100644
index 0000000..3126b92
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/time.c
@@ -0,0 +1,160 @@
+/*
+ * arch/blackfin/kernel/time.c
+ *
+ * This file contains the Blackfin-specific time handling details.
+ * Most of the stuff is located in the machine specific files.
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/profile.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include <asm/blackfin.h>
+#include <asm/time.h>
+#include <asm/gptimers.h>
+
+/* This is an NTP setting */
+#define	TICK_SIZE (tick_nsec / 1000)
+
+static struct irqaction bfin_timer_irq = {
+	.name = "Blackfin Timer Tick",
+};
+
+#if defined(CONFIG_IPIPE)
+void __init setup_system_timer0(void)
+{
+	/* Power down the core timer, just to play safe. */
+	bfin_write_TCNTL(0);
+
+	disable_gptimers(TIMER0bit);
+	set_gptimer_status(0, TIMER_STATUS_TRUN0);
+	while (get_gptimer_status(0) & TIMER_STATUS_TRUN0)
+		udelay(10);
+
+	set_gptimer_config(0, 0x59); /* IRQ enable, periodic, PWM_OUT, SCLKed, OUT PAD disabled */
+	set_gptimer_period(TIMER0_id, get_sclk() / HZ);
+	set_gptimer_pwidth(TIMER0_id, 1);
+	SSYNC();
+	enable_gptimers(TIMER0bit);
+}
+#else
+void __init setup_core_timer(void)
+{
+	u32 tcount;
+
+	/* power up the timer, but don't enable it just yet */
+	bfin_write_TCNTL(TMPWR);
+	CSYNC();
+
+	/* the TSCALE prescaler counter */
+	bfin_write_TSCALE(TIME_SCALE - 1);
+
+	tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
+	bfin_write_TPERIOD(tcount);
+	bfin_write_TCOUNT(tcount);
+
+	/* now enable the timer */
+	CSYNC();
+
+	bfin_write_TCNTL(TAUTORLD | TMREN | TMPWR);
+}
+#endif
+
+static void __init
+time_sched_init(irqreturn_t(*timer_routine) (int, void *))
+{
+#if defined(CONFIG_IPIPE)
+	setup_system_timer0();
+	bfin_timer_irq.handler = timer_routine;
+	setup_irq(IRQ_TIMER0, &bfin_timer_irq);
+#else
+	setup_core_timer();
+	bfin_timer_irq.handler = timer_routine;
+	setup_irq(IRQ_CORETMR, &bfin_timer_irq);
+#endif
+}
+
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+/*
+ * Should return useconds since last timer tick
+ */
+static u32 blackfin_gettimeoffset(void)
+{
+	unsigned long offset;
+	unsigned long clocks_per_jiffy;
+
+#if defined(CONFIG_IPIPE)
+	clocks_per_jiffy = bfin_read_TIMER0_PERIOD();
+	offset = bfin_read_TIMER0_COUNTER() / \
+		(((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC);
+
+	if ((get_gptimer_status(0) & TIMER_STATUS_TIMIL0) && offset < (100000 / HZ / 2))
+		offset += (USEC_PER_SEC / HZ);
+#else
+	clocks_per_jiffy = bfin_read_TPERIOD();
+	offset = (clocks_per_jiffy - bfin_read_TCOUNT()) / \
+		(((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC);
+
+	/* Check if we just wrapped the counters and maybe missed a tick */
+	if ((bfin_read_ILAT() & (1 << IRQ_CORETMR))
+		&& (offset < (100000 / HZ / 2)))
+		offset += (USEC_PER_SEC / HZ);
+#endif
+	return offset;
+}
+#endif
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "xtime_update()" routine every clocktick
+ */
+#ifdef CONFIG_CORE_TIMER_IRQ_L1
+__attribute__((l1_text))
+#endif
+irqreturn_t timer_interrupt(int irq, void *dummy)
+{
+	xtime_update(1);
+
+#ifdef CONFIG_IPIPE
+	update_root_process_times(get_irq_regs());
+#else
+	update_process_times(user_mode(get_irq_regs()));
+#endif
+	profile_tick(CPU_PROFILING);
+
+	return IRQ_HANDLED;
+}
+
+void read_persistent_clock(struct timespec *ts)
+{
+	time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60;	/* 1 Jan 2007 */
+	ts->tv_sec = secs_since_1970;
+	ts->tv_nsec = 0;
+}
+
+void __init time_init(void)
+{
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+	arch_gettimeoffset = blackfin_gettimeoffset;
+#endif
+
+#ifdef CONFIG_RTC_DRV_BFIN
+	/* [#2663] hack to filter junk RTC values that would cause
+	 * userspace to have to deal with time values greater than
+	 * 2^31 seconds (which uClibc cannot cope with yet)
+	 */
+	if ((bfin_read_RTC_STAT() & 0xC0000000) == 0xC0000000) {
+		printk(KERN_NOTICE "bfin-rtc: invalid date; resetting\n");
+		bfin_write_RTC_STAT(0);
+	}
+#endif
+
+	time_sched_init(timer_interrupt);
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/trace.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/trace.c
new file mode 100644
index 0000000..151f221
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/trace.c
@@ -0,0 +1,988 @@
+/* provide some functions which dump the trace buffer, in a nice way for people
+ * to read it, and understand what is going on
+ *
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/kernel.h>
+#include <linux/hardirq.h>
+#include <linux/thread_info.h>
+#include <linux/mm.h>
+#include <linux/oom.h>
+#include <linux/sched/signal.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/trace.h>
+#include <asm/fixed_code.h>
+#include <asm/traps.h>
+#include <asm/irq_handler.h>
+#include <asm/pda.h>
+
+void decode_address(char *buf, unsigned long address)
+{
+	struct task_struct *p;
+	struct mm_struct *mm;
+	unsigned long offset;
+	struct rb_node *n;
+
+#ifdef CONFIG_KALLSYMS
+	unsigned long symsize;
+	const char *symname;
+	char *modname;
+	char *delim = ":";
+	char namebuf[128];
+#endif
+
+	buf += sprintf(buf, "<0x%08lx> ", address);
+
+#ifdef CONFIG_KALLSYMS
+	/* look up the address and see if we are in kernel space */
+	symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);
+
+	if (symname) {
+		/* yeah! kernel space! */
+		if (!modname)
+			modname = delim = "";
+		sprintf(buf, "{ %s%s%s%s + 0x%lx }",
+			delim, modname, delim, symname,
+			(unsigned long)offset);
+		return;
+	}
+#endif
+
+	if (address >= FIXED_CODE_START && address < FIXED_CODE_END) {
+		/* Problem in fixed code section? */
+		strcat(buf, "/* Maybe fixed code section */");
+		return;
+
+	} else if (address < CONFIG_BOOT_LOAD) {
+		/* Problem somewhere before the kernel start address */
+		strcat(buf, "/* Maybe null pointer? */");
+		return;
+
+	} else if (address >= COREMMR_BASE) {
+		strcat(buf, "/* core mmrs */");
+		return;
+
+	} else if (address >= SYSMMR_BASE) {
+		strcat(buf, "/* system mmrs */");
+		return;
+
+	} else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) {
+		strcat(buf, "/* on-chip L1 ROM */");
+		return;
+
+	} else if (address >= L1_SCRATCH_START && address < L1_SCRATCH_START + L1_SCRATCH_LENGTH) {
+		strcat(buf, "/* on-chip scratchpad */");
+		return;
+
+	} else if (address >= physical_mem_end && address < ASYNC_BANK0_BASE) {
+		strcat(buf, "/* unconnected memory */");
+		return;
+
+	} else if (address >= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE && address < BOOT_ROM_START) {
+		strcat(buf, "/* reserved memory */");
+		return;
+
+	} else if (address >= L1_DATA_A_START && address < L1_DATA_A_START + L1_DATA_A_LENGTH) {
+		strcat(buf, "/* on-chip Data Bank A */");
+		return;
+
+	} else if (address >= L1_DATA_B_START && address < L1_DATA_B_START + L1_DATA_B_LENGTH) {
+		strcat(buf, "/* on-chip Data Bank B */");
+		return;
+	}
+
+	/*
+	 * Don't walk any of the vmas if we are oopsing, it has been known
+	 * to cause problems - corrupt vmas (kernel crashes) cause double faults
+	 */
+	if (oops_in_progress) {
+		strcat(buf, "/* kernel dynamic memory (maybe user-space) */");
+		return;
+	}
+
+	/* looks like we're off in user-land, so let's walk all the
+	 * mappings of all our processes and see if we can't be a whee
+	 * bit more specific
+	 */
+	read_lock(&tasklist_lock);
+	for_each_process(p) {
+		struct task_struct *t;
+
+		t = find_lock_task_mm(p);
+		if (!t)
+			continue;
+
+		mm = t->mm;
+		if (!down_read_trylock(&mm->mmap_sem))
+			goto __continue;
+
+		for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) {
+			struct vm_area_struct *vma;
+
+			vma = rb_entry(n, struct vm_area_struct, vm_rb);
+
+			if (address >= vma->vm_start && address < vma->vm_end) {
+				char _tmpbuf[256];
+				char *name = t->comm;
+				struct file *file = vma->vm_file;
+
+				if (file) {
+					char *d_name = file_path(file, _tmpbuf,
+						      sizeof(_tmpbuf));
+					if (!IS_ERR(d_name))
+						name = d_name;
+				}
+
+				/* FLAT does not have its text aligned to the start of
+				 * the map while FDPIC ELF does ...
+				 */
+
+				/* before we can check flat/fdpic, we need to
+				 * make sure current is valid
+				 */
+				if ((unsigned long)current >= FIXED_CODE_START &&
+				    !((unsigned long)current & 0x3)) {
+					if (current->mm &&
+					    (address > current->mm->start_code) &&
+					    (address < current->mm->end_code))
+						offset = address - current->mm->start_code;
+					else
+						offset = (address - vma->vm_start) +
+							 (vma->vm_pgoff << PAGE_SHIFT);
+
+					sprintf(buf, "[ %s + 0x%lx ]", name, offset);
+				} else
+					sprintf(buf, "[ %s vma:0x%lx-0x%lx]",
+						name, vma->vm_start, vma->vm_end);
+
+				up_read(&mm->mmap_sem);
+				task_unlock(t);
+
+				if (buf[0] == '\0')
+					sprintf(buf, "[ %s ] dynamic memory", name);
+
+				goto done;
+			}
+		}
+
+		up_read(&mm->mmap_sem);
+__continue:
+		task_unlock(t);
+	}
+
+	/*
+	 * we were unable to find this address anywhere,
+	 * or some MMs were skipped because they were in use.
+	 */
+	sprintf(buf, "/* kernel dynamic memory */");
+
+done:
+	read_unlock(&tasklist_lock);
+}
+
+#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
+
+/*
+ * Similar to get_user, do some address checking, then dereference
+ * Return true on success, false on bad address
+ */
+bool get_mem16(unsigned short *val, unsigned short *address)
+{
+	unsigned long addr = (unsigned long)address;
+
+	/* Check for odd addresses */
+	if (addr & 0x1)
+		return false;
+
+	switch (bfin_mem_access_type(addr, 2)) {
+	case BFIN_MEM_ACCESS_CORE:
+	case BFIN_MEM_ACCESS_CORE_ONLY:
+		*val = *address;
+		return true;
+	case BFIN_MEM_ACCESS_DMA:
+		dma_memcpy(val, address, 2);
+		return true;
+	case BFIN_MEM_ACCESS_ITEST:
+		isram_memcpy(val, address, 2);
+		return true;
+	default: /* invalid access */
+		return false;
+	}
+}
+
+bool get_instruction(unsigned int *val, unsigned short *address)
+{
+	unsigned long addr = (unsigned long)address;
+	unsigned short opcode0, opcode1;
+
+	/* Check for odd addresses */
+	if (addr & 0x1)
+		return false;
+
+	/* MMR region will never have instructions */
+	if (addr >= SYSMMR_BASE)
+		return false;
+
+	/* Scratchpad will never have instructions */
+	if (addr >= L1_SCRATCH_START && addr < L1_SCRATCH_START + L1_SCRATCH_LENGTH)
+		return false;
+
+	/* Data banks will never have instructions */
+	if (addr >= BOOT_ROM_START + BOOT_ROM_LENGTH && addr < L1_CODE_START)
+		return false;
+
+	if (!get_mem16(&opcode0, address))
+		return false;
+
+	/* was this a 32-bit instruction? If so, get the next 16 bits */
+	if ((opcode0 & 0xc000) == 0xc000) {
+		if (!get_mem16(&opcode1, address + 1))
+			return false;
+		*val = (opcode0 << 16) + opcode1;
+	} else
+		*val = opcode0;
+
+	return true;
+}
+
+#if defined(CONFIG_DEBUG_BFIN_HWTRACE_ON)
+/*
+ * decode the instruction if we are printing out the trace, as it
+ * makes things easier to follow, without running it through objdump
+ * Decode the change of flow, and the common load/store instructions
+ * which are the main cause for faults, and discontinuities in the trace
+ * buffer.
+ */
+
+#define ProgCtrl_opcode         0x0000
+#define ProgCtrl_poprnd_bits    0
+#define ProgCtrl_poprnd_mask    0xf
+#define ProgCtrl_prgfunc_bits   4
+#define ProgCtrl_prgfunc_mask   0xf
+#define ProgCtrl_code_bits      8
+#define ProgCtrl_code_mask      0xff
+
+static void decode_ProgCtrl_0(unsigned int opcode)
+{
+	int poprnd  = ((opcode >> ProgCtrl_poprnd_bits) & ProgCtrl_poprnd_mask);
+	int prgfunc = ((opcode >> ProgCtrl_prgfunc_bits) & ProgCtrl_prgfunc_mask);
+
+	if (prgfunc == 0 && poprnd == 0)
+		pr_cont("NOP");
+	else if (prgfunc == 1 && poprnd == 0)
+		pr_cont("RTS");
+	else if (prgfunc == 1 && poprnd == 1)
+		pr_cont("RTI");
+	else if (prgfunc == 1 && poprnd == 2)
+		pr_cont("RTX");
+	else if (prgfunc == 1 && poprnd == 3)
+		pr_cont("RTN");
+	else if (prgfunc == 1 && poprnd == 4)
+		pr_cont("RTE");
+	else if (prgfunc == 2 && poprnd == 0)
+		pr_cont("IDLE");
+	else if (prgfunc == 2 && poprnd == 3)
+		pr_cont("CSYNC");
+	else if (prgfunc == 2 && poprnd == 4)
+		pr_cont("SSYNC");
+	else if (prgfunc == 2 && poprnd == 5)
+		pr_cont("EMUEXCPT");
+	else if (prgfunc == 3)
+		pr_cont("CLI R%i", poprnd);
+	else if (prgfunc == 4)
+		pr_cont("STI R%i", poprnd);
+	else if (prgfunc == 5)
+		pr_cont("JUMP (P%i)", poprnd);
+	else if (prgfunc == 6)
+		pr_cont("CALL (P%i)", poprnd);
+	else if (prgfunc == 7)
+		pr_cont("CALL (PC + P%i)", poprnd);
+	else if (prgfunc == 8)
+		pr_cont("JUMP (PC + P%i", poprnd);
+	else if (prgfunc == 9)
+		pr_cont("RAISE %i", poprnd);
+	else if (prgfunc == 10)
+		pr_cont("EXCPT %i", poprnd);
+	else
+		pr_cont("0x%04x", opcode);
+
+}
+
+#define BRCC_opcode             0x1000
+#define BRCC_offset_bits        0
+#define BRCC_offset_mask        0x3ff
+#define BRCC_B_bits             10
+#define BRCC_B_mask             0x1
+#define BRCC_T_bits             11
+#define BRCC_T_mask             0x1
+#define BRCC_code_bits          12
+#define BRCC_code_mask          0xf
+
+static void decode_BRCC_0(unsigned int opcode)
+{
+	int B = ((opcode >> BRCC_B_bits) & BRCC_B_mask);
+	int T = ((opcode >> BRCC_T_bits) & BRCC_T_mask);
+
+	pr_cont("IF %sCC JUMP pcrel %s", T ? "" : "!", B ? "(BP)" : "");
+}
+
+#define CALLa_opcode    0xe2000000
+#define CALLa_addr_bits 0
+#define CALLa_addr_mask 0xffffff
+#define CALLa_S_bits    24
+#define CALLa_S_mask    0x1
+#define CALLa_code_bits 25
+#define CALLa_code_mask 0x7f
+
+static void decode_CALLa_0(unsigned int opcode)
+{
+	int S   = ((opcode >> (CALLa_S_bits - 16)) & CALLa_S_mask);
+
+	if (S)
+		pr_cont("CALL pcrel");
+	else
+		pr_cont("JUMP.L");
+}
+
+#define LoopSetup_opcode                0xe0800000
+#define LoopSetup_eoffset_bits          0
+#define LoopSetup_eoffset_mask          0x3ff
+#define LoopSetup_dontcare_bits         10
+#define LoopSetup_dontcare_mask         0x3
+#define LoopSetup_reg_bits              12
+#define LoopSetup_reg_mask              0xf
+#define LoopSetup_soffset_bits          16
+#define LoopSetup_soffset_mask          0xf
+#define LoopSetup_c_bits                20
+#define LoopSetup_c_mask                0x1
+#define LoopSetup_rop_bits              21
+#define LoopSetup_rop_mask              0x3
+#define LoopSetup_code_bits             23
+#define LoopSetup_code_mask             0x1ff
+
+static void decode_LoopSetup_0(unsigned int opcode)
+{
+	int c   = ((opcode >> LoopSetup_c_bits)   & LoopSetup_c_mask);
+	int reg = ((opcode >> LoopSetup_reg_bits) & LoopSetup_reg_mask);
+	int rop = ((opcode >> LoopSetup_rop_bits) & LoopSetup_rop_mask);
+
+	pr_cont("LSETUP <> LC%i", c);
+	if ((rop & 1) == 1)
+		pr_cont("= P%i", reg);
+	if ((rop & 2) == 2)
+		pr_cont(" >> 0x1");
+}
+
+#define DspLDST_opcode          0x9c00
+#define DspLDST_reg_bits        0
+#define DspLDST_reg_mask        0x7
+#define DspLDST_i_bits          3
+#define DspLDST_i_mask          0x3
+#define DspLDST_m_bits          5
+#define DspLDST_m_mask          0x3
+#define DspLDST_aop_bits        7
+#define DspLDST_aop_mask        0x3
+#define DspLDST_W_bits          9
+#define DspLDST_W_mask          0x1
+#define DspLDST_code_bits       10
+#define DspLDST_code_mask       0x3f
+
+static void decode_dspLDST_0(unsigned int opcode)
+{
+	int i   = ((opcode >> DspLDST_i_bits) & DspLDST_i_mask);
+	int m   = ((opcode >> DspLDST_m_bits) & DspLDST_m_mask);
+	int W   = ((opcode >> DspLDST_W_bits) & DspLDST_W_mask);
+	int aop = ((opcode >> DspLDST_aop_bits) & DspLDST_aop_mask);
+	int reg = ((opcode >> DspLDST_reg_bits) & DspLDST_reg_mask);
+
+	if (W == 0) {
+		pr_cont("R%i", reg);
+		switch (m) {
+		case 0:
+			pr_cont(" = ");
+			break;
+		case 1:
+			pr_cont(".L = ");
+			break;
+		case 2:
+			pr_cont(".W = ");
+			break;
+		}
+	}
+
+	pr_cont("[ I%i", i);
+
+	switch (aop) {
+	case 0:
+		pr_cont("++ ]");
+		break;
+	case 1:
+		pr_cont("-- ]");
+		break;
+	}
+
+	if (W == 1) {
+		pr_cont(" = R%i", reg);
+		switch (m) {
+		case 1:
+			pr_cont(".L = ");
+			break;
+		case 2:
+			pr_cont(".W = ");
+			break;
+		}
+	}
+}
+
+#define LDST_opcode             0x9000
+#define LDST_reg_bits           0
+#define LDST_reg_mask           0x7
+#define LDST_ptr_bits           3
+#define LDST_ptr_mask           0x7
+#define LDST_Z_bits             6
+#define LDST_Z_mask             0x1
+#define LDST_aop_bits           7
+#define LDST_aop_mask           0x3
+#define LDST_W_bits             9
+#define LDST_W_mask             0x1
+#define LDST_sz_bits            10
+#define LDST_sz_mask            0x3
+#define LDST_code_bits          12
+#define LDST_code_mask          0xf
+
+static void decode_LDST_0(unsigned int opcode)
+{
+	int Z   = ((opcode >> LDST_Z_bits) & LDST_Z_mask);
+	int W   = ((opcode >> LDST_W_bits) & LDST_W_mask);
+	int sz  = ((opcode >> LDST_sz_bits) & LDST_sz_mask);
+	int aop = ((opcode >> LDST_aop_bits) & LDST_aop_mask);
+	int reg = ((opcode >> LDST_reg_bits) & LDST_reg_mask);
+	int ptr = ((opcode >> LDST_ptr_bits) & LDST_ptr_mask);
+
+	if (W == 0)
+		pr_cont("%s%i = ", (sz == 0 && Z == 1) ? "P" : "R", reg);
+
+	switch (sz) {
+	case 1:
+		pr_cont("W");
+		break;
+	case 2:
+		pr_cont("B");
+		break;
+	}
+
+	pr_cont("[P%i", ptr);
+
+	switch (aop) {
+	case 0:
+		pr_cont("++");
+		break;
+	case 1:
+		pr_cont("--");
+		break;
+	}
+	pr_cont("]");
+
+	if (W == 1)
+		pr_cont(" = %s%i ", (sz == 0 && Z == 1) ? "P" : "R", reg);
+
+	if (sz) {
+		if (Z)
+			pr_cont(" (X)");
+		else
+			pr_cont(" (Z)");
+	}
+}
+
+#define LDSTii_opcode           0xa000
+#define LDSTii_reg_bit          0
+#define LDSTii_reg_mask         0x7
+#define LDSTii_ptr_bit          3
+#define LDSTii_ptr_mask         0x7
+#define LDSTii_offset_bit       6
+#define LDSTii_offset_mask      0xf
+#define LDSTii_op_bit           10
+#define LDSTii_op_mask          0x3
+#define LDSTii_W_bit            12
+#define LDSTii_W_mask           0x1
+#define LDSTii_code_bit         13
+#define LDSTii_code_mask        0x7
+
+static void decode_LDSTii_0(unsigned int opcode)
+{
+	int reg = ((opcode >> LDSTii_reg_bit) & LDSTii_reg_mask);
+	int ptr = ((opcode >> LDSTii_ptr_bit) & LDSTii_ptr_mask);
+	int offset = ((opcode >> LDSTii_offset_bit) & LDSTii_offset_mask);
+	int op = ((opcode >> LDSTii_op_bit) & LDSTii_op_mask);
+	int W = ((opcode >> LDSTii_W_bit) & LDSTii_W_mask);
+
+	if (W == 0) {
+		pr_cont("%s%i = %s[P%i + %i]", op == 3 ? "R" : "P", reg,
+			op == 1 || op == 2 ? "" : "W", ptr, offset);
+		if (op == 2)
+			pr_cont("(Z)");
+		if (op == 3)
+			pr_cont("(X)");
+	} else {
+		pr_cont("%s[P%i + %i] = %s%i", op == 0 ? "" : "W", ptr,
+			offset, op == 3 ? "P" : "R", reg);
+	}
+}
+
+#define LDSTidxI_opcode         0xe4000000
+#define LDSTidxI_offset_bits    0
+#define LDSTidxI_offset_mask    0xffff
+#define LDSTidxI_reg_bits       16
+#define LDSTidxI_reg_mask       0x7
+#define LDSTidxI_ptr_bits       19
+#define LDSTidxI_ptr_mask       0x7
+#define LDSTidxI_sz_bits        22
+#define LDSTidxI_sz_mask        0x3
+#define LDSTidxI_Z_bits         24
+#define LDSTidxI_Z_mask         0x1
+#define LDSTidxI_W_bits         25
+#define LDSTidxI_W_mask         0x1
+#define LDSTidxI_code_bits      26
+#define LDSTidxI_code_mask      0x3f
+
+static void decode_LDSTidxI_0(unsigned int opcode)
+{
+	int Z      = ((opcode >> LDSTidxI_Z_bits)      & LDSTidxI_Z_mask);
+	int W      = ((opcode >> LDSTidxI_W_bits)      & LDSTidxI_W_mask);
+	int sz     = ((opcode >> LDSTidxI_sz_bits)     & LDSTidxI_sz_mask);
+	int reg    = ((opcode >> LDSTidxI_reg_bits)    & LDSTidxI_reg_mask);
+	int ptr    = ((opcode >> LDSTidxI_ptr_bits)    & LDSTidxI_ptr_mask);
+	int offset = ((opcode >> LDSTidxI_offset_bits) & LDSTidxI_offset_mask);
+
+	if (W == 0)
+		pr_cont("%s%i = ", sz == 0 && Z == 1 ? "P" : "R", reg);
+
+	if (sz == 1)
+		pr_cont("W");
+	if (sz == 2)
+		pr_cont("B");
+
+	pr_cont("[P%i + %s0x%x]", ptr, offset & 0x20 ? "-" : "",
+		(offset & 0x1f) << 2);
+
+	if (W == 0 && sz != 0) {
+		if (Z)
+			pr_cont("(X)");
+		else
+			pr_cont("(Z)");
+	}
+
+	if (W == 1)
+		pr_cont("= %s%i", (sz == 0 && Z == 1) ? "P" : "R", reg);
+
+}
+
+static void decode_opcode(unsigned int opcode)
+{
+#ifdef CONFIG_BUG
+	if (opcode == BFIN_BUG_OPCODE)
+		pr_cont("BUG");
+	else
+#endif
+	if ((opcode & 0xffffff00) == ProgCtrl_opcode)
+		decode_ProgCtrl_0(opcode);
+	else if ((opcode & 0xfffff000) == BRCC_opcode)
+		decode_BRCC_0(opcode);
+	else if ((opcode & 0xfffff000) == 0x2000)
+		pr_cont("JUMP.S");
+	else if ((opcode & 0xfe000000) == CALLa_opcode)
+		decode_CALLa_0(opcode);
+	else if ((opcode & 0xff8000C0) == LoopSetup_opcode)
+		decode_LoopSetup_0(opcode);
+	else if ((opcode & 0xfffffc00) == DspLDST_opcode)
+		decode_dspLDST_0(opcode);
+	else if ((opcode & 0xfffff000) == LDST_opcode)
+		decode_LDST_0(opcode);
+	else if ((opcode & 0xffffe000) == LDSTii_opcode)
+		decode_LDSTii_0(opcode);
+	else if ((opcode & 0xfc000000) == LDSTidxI_opcode)
+		decode_LDSTidxI_0(opcode);
+	else if (opcode & 0xffff0000)
+		pr_cont("0x%08x", opcode);
+	else
+		pr_cont("0x%04x", opcode);
+}
+
+#define BIT_MULTI_INS 0x08000000
+static void decode_instruction(unsigned short *address)
+{
+	unsigned int opcode;
+
+	if (!get_instruction(&opcode, address))
+		return;
+
+	decode_opcode(opcode);
+
+	/* If things are a 32-bit instruction, it has the possibility of being
+	 * a multi-issue instruction (a 32-bit, and 2 16 bit instrucitions)
+	 * This test collidates with the unlink instruction, so disallow that
+	 */
+	if ((opcode & 0xc0000000) == 0xc0000000 &&
+	    (opcode & BIT_MULTI_INS) &&
+	    (opcode & 0xe8000000) != 0xe8000000) {
+		pr_cont(" || ");
+		if (!get_instruction(&opcode, address + 2))
+			return;
+		decode_opcode(opcode);
+		pr_cont(" || ");
+		if (!get_instruction(&opcode, address + 3))
+			return;
+		decode_opcode(opcode);
+	}
+}
+#endif
+
+void dump_bfin_trace_buffer(void)
+{
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+	int tflags, i = 0, fault = 0;
+	char buf[150];
+	unsigned short *addr;
+	unsigned int cpu = raw_smp_processor_id();
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	int j, index;
+#endif
+
+	trace_buffer_save(tflags);
+
+	pr_notice("Hardware Trace:\n");
+
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	pr_notice("WARNING: Expanded trace turned on - can not trace exceptions\n");
+#endif
+
+	if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
+		for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
+			addr = (unsigned short *)bfin_read_TBUF();
+			decode_address(buf, (unsigned long)addr);
+			pr_notice("%4i Target : %s\n", i, buf);
+			/* Normally, the faulting instruction doesn't go into
+			 * the trace buffer, (since it doesn't commit), so
+			 * we print out the fault address here
+			 */
+			if (!fault && addr == ((unsigned short *)evt_ivhw)) {
+				addr = (unsigned short *)bfin_read_TBUF();
+				decode_address(buf, (unsigned long)addr);
+				pr_notice("      FAULT : %s ", buf);
+				decode_instruction(addr);
+				pr_cont("\n");
+				fault = 1;
+				continue;
+			}
+			if (!fault && addr == (unsigned short *)trap &&
+				(cpu_pda[cpu].seqstat & SEQSTAT_EXCAUSE) > VEC_EXCPT15) {
+				decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
+				pr_notice("      FAULT : %s ", buf);
+				decode_instruction((unsigned short *)cpu_pda[cpu].icplb_fault_addr);
+				pr_cont("\n");
+				fault = 1;
+			}
+			addr = (unsigned short *)bfin_read_TBUF();
+			decode_address(buf, (unsigned long)addr);
+			pr_notice("     Source : %s ", buf);
+			decode_instruction(addr);
+			pr_cont("\n");
+		}
+	}
+
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	if (trace_buff_offset)
+		index = trace_buff_offset / 4;
+	else
+		index = EXPAND_LEN;
+
+	j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
+	while (j) {
+		decode_address(buf, software_trace_buff[index]);
+		pr_notice("%4i Target : %s\n", i, buf);
+		index -= 1;
+		if (index < 0)
+			index = EXPAND_LEN;
+		decode_address(buf, software_trace_buff[index]);
+		pr_notice("     Source : %s ", buf);
+		decode_instruction((unsigned short *)software_trace_buff[index]);
+		pr_cont("\n");
+		index -= 1;
+		if (index < 0)
+			index = EXPAND_LEN;
+		j--;
+		i++;
+	}
+#endif
+
+	trace_buffer_restore(tflags);
+#endif
+}
+EXPORT_SYMBOL(dump_bfin_trace_buffer);
+
+void dump_bfin_process(struct pt_regs *fp)
+{
+	/* We should be able to look at fp->ipend, but we don't push it on the
+	 * stack all the time, so do this until we fix that */
+	unsigned int context = bfin_read_IPEND();
+
+	if (oops_in_progress)
+		pr_emerg("Kernel OOPS in progress\n");
+
+	if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
+		pr_notice("HW Error context\n");
+	else if (context & 0x0020)
+		pr_notice("Deferred Exception context\n");
+	else if (context & 0x3FC0)
+		pr_notice("Interrupt context\n");
+	else if (context & 0x4000)
+		pr_notice("Deferred Interrupt context\n");
+	else if (context & 0x8000)
+		pr_notice("Kernel process context\n");
+
+	/* Because we are crashing, and pointers could be bad, we check things
+	 * pretty closely before we use them
+	 */
+	if ((unsigned long)current >= FIXED_CODE_START &&
+	    !((unsigned long)current & 0x3) && current->pid) {
+		pr_notice("CURRENT PROCESS:\n");
+		if (current->comm >= (char *)FIXED_CODE_START)
+			pr_notice("COMM=%s PID=%d",
+				current->comm, current->pid);
+		else
+			pr_notice("COMM= invalid");
+
+		pr_cont("  CPU=%d\n", current_thread_info()->cpu);
+		if (!((unsigned long)current->mm & 0x3) &&
+			(unsigned long)current->mm >= FIXED_CODE_START) {
+			pr_notice("TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n",
+				(void *)current->mm->start_code,
+				(void *)current->mm->end_code,
+				(void *)current->mm->start_data,
+				(void *)current->mm->end_data);
+			pr_notice(" BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n",
+				(void *)current->mm->end_data,
+				(void *)current->mm->brk,
+				(void *)current->mm->start_stack);
+		} else
+			pr_notice("invalid mm\n");
+	} else
+		pr_notice("No Valid process in current context\n");
+}
+
+void dump_bfin_mem(struct pt_regs *fp)
+{
+	unsigned short *addr, *erraddr, val = 0, err = 0;
+	char sti = 0, buf[6];
+
+	erraddr = (void *)fp->pc;
+
+	pr_notice("return address: [0x%p]; contents of:", erraddr);
+
+	for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10;
+	     addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
+	     addr++) {
+		if (!((unsigned long)addr & 0xF))
+			pr_notice("0x%p: ", addr);
+
+		if (!get_mem16(&val, addr)) {
+				val = 0;
+				sprintf(buf, "????");
+		} else
+			sprintf(buf, "%04x", val);
+
+		if (addr == erraddr) {
+			pr_cont("[%s]", buf);
+			err = val;
+		} else
+			pr_cont(" %s ", buf);
+
+		/* Do any previous instructions turn on interrupts? */
+		if (addr <= erraddr &&				/* in the past */
+		    ((val >= 0x0040 && val <= 0x0047) ||	/* STI instruction */
+		      val == 0x017b))				/* [SP++] = RETI */
+			sti = 1;
+	}
+
+	pr_cont("\n");
+
+	/* Hardware error interrupts can be deferred */
+	if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR &&
+	    oops_in_progress)){
+		pr_notice("Looks like this was a deferred error - sorry\n");
+#ifndef CONFIG_DEBUG_HWERR
+		pr_notice("The remaining message may be meaningless\n");
+		pr_notice("You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
+#else
+		/* If we are handling only one peripheral interrupt
+		 * and current mm and pid are valid, and the last error
+		 * was in that user space process's text area
+		 * print it out - because that is where the problem exists
+		 */
+		if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) &&
+		     (current->pid && current->mm)) {
+			/* And the last RETI points to the current userspace context */
+			if ((fp + 1)->pc >= current->mm->start_code &&
+			    (fp + 1)->pc <= current->mm->end_code) {
+				pr_notice("It might be better to look around here :\n");
+				pr_notice("-------------------------------------------\n");
+				show_regs(fp + 1);
+				pr_notice("-------------------------------------------\n");
+			}
+		}
+#endif
+	}
+}
+
+void show_regs(struct pt_regs *fp)
+{
+	char buf[150];
+	struct irqaction *action;
+	unsigned int i;
+	unsigned long flags = 0;
+	unsigned int cpu = raw_smp_processor_id();
+	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
+
+	pr_notice("\n");
+	show_regs_print_info(KERN_NOTICE);
+
+	if (CPUID != bfin_cpuid())
+		pr_notice("Compiled for cpu family 0x%04x (Rev %d), "
+			"but running on:0x%04x (Rev %d)\n",
+			CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid());
+
+	pr_notice("ADSP-%s-0.%d",
+		CPU, bfin_compiled_revid());
+
+	if (bfin_compiled_revid() !=  bfin_revid())
+		pr_cont("(Detected 0.%d)", bfin_revid());
+
+	pr_cont(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n",
+		get_cclk()/1000000, get_sclk()/1000000,
+#ifdef CONFIG_MPU
+		"mpu on"
+#else
+		"mpu off"
+#endif
+		);
+
+	pr_notice("%s", linux_banner);
+
+	pr_notice("\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
+	pr_notice(" SEQSTAT: %08lx  IPEND: %04lx  IMASK: %04lx  SYSCFG: %04lx\n",
+		(long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg);
+	if (fp->ipend & EVT_IRPTEN)
+		pr_notice("  Global Interrupts Disabled (IPEND[4])\n");
+	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
+			EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR)))
+		pr_notice("  Peripheral interrupts masked off\n");
+	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
+		pr_notice("  Kernel interrupts masked off\n");
+	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
+		pr_notice("  HWERRCAUSE: 0x%lx\n",
+			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
+#ifdef EBIU_ERRMST
+		/* If the error was from the EBIU, print it out */
+		if (bfin_read_EBIU_ERRMST() & CORE_ERROR) {
+			pr_notice("  EBIU Error Reason  : 0x%04x\n",
+				bfin_read_EBIU_ERRMST());
+			pr_notice("  EBIU Error Address : 0x%08x\n",
+				bfin_read_EBIU_ERRADD());
+		}
+#endif
+	}
+	pr_notice("  EXCAUSE   : 0x%lx\n",
+		fp->seqstat & SEQSTAT_EXCAUSE);
+	for (i = 2; i <= 15 ; i++) {
+		if (fp->ipend & (1 << i)) {
+			if (i != 4) {
+				decode_address(buf, bfin_read32(EVT0 + 4*i));
+				pr_notice("  physical IVG%i asserted : %s\n", i, buf);
+			} else
+				pr_notice("  interrupts disabled\n");
+		}
+	}
+
+	/* if no interrupts are going off, don't print this out */
+	if (fp->ipend & ~0x3F) {
+		for (i = 0; i < (NR_IRQS - 1); i++) {
+			struct irq_desc *desc = irq_to_desc(i);
+			if (!in_atomic)
+				raw_spin_lock_irqsave(&desc->lock, flags);
+
+			action = desc->action;
+			if (!action)
+				goto unlock;
+
+			decode_address(buf, (unsigned int)action->handler);
+			pr_notice("  logical irq %3d mapped  : %s", i, buf);
+			for (action = action->next; action; action = action->next) {
+				decode_address(buf, (unsigned int)action->handler);
+				pr_cont(", %s", buf);
+			}
+			pr_cont("\n");
+unlock:
+			if (!in_atomic)
+				raw_spin_unlock_irqrestore(&desc->lock, flags);
+		}
+	}
+
+	decode_address(buf, fp->rete);
+	pr_notice(" RETE: %s\n", buf);
+	decode_address(buf, fp->retn);
+	pr_notice(" RETN: %s\n", buf);
+	decode_address(buf, fp->retx);
+	pr_notice(" RETX: %s\n", buf);
+	decode_address(buf, fp->rets);
+	pr_notice(" RETS: %s\n", buf);
+	decode_address(buf, fp->pc);
+	pr_notice(" PC  : %s\n", buf);
+
+	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) &&
+	    (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) {
+		decode_address(buf, cpu_pda[cpu].dcplb_fault_addr);
+		pr_notice("DCPLB_FAULT_ADDR: %s\n", buf);
+		decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
+		pr_notice("ICPLB_FAULT_ADDR: %s\n", buf);
+	}
+
+	pr_notice("PROCESSOR STATE:\n");
+	pr_notice(" R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
+		fp->r0, fp->r1, fp->r2, fp->r3);
+	pr_notice(" R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
+		fp->r4, fp->r5, fp->r6, fp->r7);
+	pr_notice(" P0 : %08lx    P1 : %08lx    P2 : %08lx    P3 : %08lx\n",
+		fp->p0, fp->p1, fp->p2, fp->p3);
+	pr_notice(" P4 : %08lx    P5 : %08lx    FP : %08lx    SP : %08lx\n",
+		fp->p4, fp->p5, fp->fp, (long)fp);
+	pr_notice(" LB0: %08lx    LT0: %08lx    LC0: %08lx\n",
+		fp->lb0, fp->lt0, fp->lc0);
+	pr_notice(" LB1: %08lx    LT1: %08lx    LC1: %08lx\n",
+		fp->lb1, fp->lt1, fp->lc1);
+	pr_notice(" B0 : %08lx    L0 : %08lx    M0 : %08lx    I0 : %08lx\n",
+		fp->b0, fp->l0, fp->m0, fp->i0);
+	pr_notice(" B1 : %08lx    L1 : %08lx    M1 : %08lx    I1 : %08lx\n",
+		fp->b1, fp->l1, fp->m1, fp->i1);
+	pr_notice(" B2 : %08lx    L2 : %08lx    M2 : %08lx    I2 : %08lx\n",
+		fp->b2, fp->l2, fp->m2, fp->i2);
+	pr_notice(" B3 : %08lx    L3 : %08lx    M3 : %08lx    I3 : %08lx\n",
+		fp->b3, fp->l3, fp->m3, fp->i3);
+	pr_notice("A0.w: %08lx   A0.x: %08lx   A1.w: %08lx   A1.x: %08lx\n",
+		fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+
+	pr_notice("USP : %08lx  ASTAT: %08lx\n",
+		rdusp(), fp->astat);
+
+	pr_notice("\n");
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/traps.c b/src/kernel/linux/v4.14/arch/blackfin/kernel/traps.c
new file mode 100644
index 0000000..a323a40
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/traps.c
@@ -0,0 +1,585 @@
+/*
+ * Main exception handling logic.
+ *
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/bug.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/sched/signal.h>
+#include <linux/sched/debug.h>
+#include <asm/traps.h>
+#include <asm/cplb.h>
+#include <asm/blackfin.h>
+#include <asm/irq_handler.h>
+#include <linux/irq.h>
+#include <asm/trace.h>
+#include <asm/fixed_code.h>
+#include <asm/pseudo_instructions.h>
+#include <asm/pda.h>
+#include <asm/asm-offsets.h>
+
+#ifdef CONFIG_KGDB
+# include <linux/kgdb.h>
+
+# define CHK_DEBUGGER_TRAP() \
+	do { \
+		kgdb_handle_exception(trapnr, sig, info.si_code, fp); \
+	} while (0)
+# define CHK_DEBUGGER_TRAP_MAYBE() \
+	do { \
+		if (kgdb_connected) \
+			CHK_DEBUGGER_TRAP(); \
+	} while (0)
+#else
+# define CHK_DEBUGGER_TRAP() do { } while (0)
+# define CHK_DEBUGGER_TRAP_MAYBE() do { } while (0)
+#endif
+
+
+#ifdef CONFIG_DEBUG_VERBOSE
+#define verbose_printk(fmt, arg...) \
+	printk(fmt, ##arg)
+#else
+#define verbose_printk(fmt, arg...) \
+	({ if (0) printk(fmt, ##arg); 0; })
+#endif
+
+#if defined(CONFIG_DEBUG_MMRS) || defined(CONFIG_DEBUG_MMRS_MODULE)
+u32 last_seqstat;
+#ifdef CONFIG_DEBUG_MMRS_MODULE
+EXPORT_SYMBOL(last_seqstat);
+#endif
+#endif
+
+/* Initiate the event table handler */
+void __init trap_init(void)
+{
+	CSYNC();
+	bfin_write_EVT3(trap);
+	CSYNC();
+}
+
+static int kernel_mode_regs(struct pt_regs *regs)
+{
+	return regs->ipend & 0xffc0;
+}
+
+asmlinkage notrace void trap_c(struct pt_regs *fp)
+{
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+	int j;
+#endif
+#ifdef CONFIG_BFIN_PSEUDODBG_INSNS
+	int opcode;
+#endif
+	unsigned int cpu = raw_smp_processor_id();
+	const char *strerror = NULL;
+	int sig = 0;
+	siginfo_t info;
+	unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE;
+
+	trace_buffer_save(j);
+#if defined(CONFIG_DEBUG_MMRS) || defined(CONFIG_DEBUG_MMRS_MODULE)
+	last_seqstat = (u32)fp->seqstat;
+#endif
+
+	/* Important - be very careful dereferncing pointers - will lead to
+	 * double faults if the stack has become corrupt
+	 */
+
+	/* trap_c() will be called for exceptions. During exceptions
+	 * processing, the pc value should be set with retx value.
+	 * With this change we can cleanup some code in signal.c- TODO
+	 */
+	fp->orig_pc = fp->retx;
+	/* printk("exception: 0x%x, ipend=%x, reti=%x, retx=%x\n",
+		trapnr, fp->ipend, fp->pc, fp->retx); */
+
+	/* send the appropriate signal to the user program */
+	switch (trapnr) {
+
+	/* This table works in conjunction with the one in ./mach-common/entry.S
+	 * Some exceptions are handled there (in assembly, in exception space)
+	 * Some are handled here, (in C, in interrupt space)
+	 * Some, like CPLB, are handled in both, where the normal path is
+	 * handled in assembly/exception space, and the error path is handled
+	 * here
+	 */
+
+	/* 0x00 - Linux Syscall, getting here is an error */
+	/* 0x01 - userspace gdb breakpoint, handled here */
+	case VEC_EXCPT01:
+		info.si_code = TRAP_ILLTRAP;
+		sig = SIGTRAP;
+		CHK_DEBUGGER_TRAP_MAYBE();
+		/* Check if this is a breakpoint in kernel space */
+		if (kernel_mode_regs(fp))
+			goto traps_done;
+		else
+			break;
+	/* 0x03 - User Defined, userspace stack overflow */
+	case VEC_EXCPT03:
+		info.si_code = SEGV_STACKFLOW;
+		sig = SIGSEGV;
+		strerror = KERN_NOTICE EXC_0x03(KERN_NOTICE);
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+	/* 0x02 - KGDB initial connection and break signal trap */
+	case VEC_EXCPT02:
+#ifdef CONFIG_KGDB
+		info.si_code = TRAP_ILLTRAP;
+		sig = SIGTRAP;
+		CHK_DEBUGGER_TRAP();
+		goto traps_done;
+#endif
+	/* 0x04 - User Defined */
+	/* 0x05 - User Defined */
+	/* 0x06 - User Defined */
+	/* 0x07 - User Defined */
+	/* 0x08 - User Defined */
+	/* 0x09 - User Defined */
+	/* 0x0A - User Defined */
+	/* 0x0B - User Defined */
+	/* 0x0C - User Defined */
+	/* 0x0D - User Defined */
+	/* 0x0E - User Defined */
+	/* 0x0F - User Defined */
+	/* If we got here, it is most likely that someone was trying to use a
+	 * custom exception handler, and it is not actually installed properly
+	 */
+	case VEC_EXCPT04 ... VEC_EXCPT15:
+		info.si_code = ILL_ILLPARAOP;
+		sig = SIGILL;
+		strerror = KERN_NOTICE EXC_0x04(KERN_NOTICE);
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+	/* 0x10 HW Single step, handled here */
+	case VEC_STEP:
+		info.si_code = TRAP_STEP;
+		sig = SIGTRAP;
+		CHK_DEBUGGER_TRAP_MAYBE();
+		/* Check if this is a single step in kernel space */
+		if (kernel_mode_regs(fp))
+			goto traps_done;
+		else
+			break;
+	/* 0x11 - Trace Buffer Full, handled here */
+	case VEC_OVFLOW:
+		info.si_code = TRAP_TRACEFLOW;
+		sig = SIGTRAP;
+		strerror = KERN_NOTICE EXC_0x11(KERN_NOTICE);
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+	/* 0x12 - Reserved, Caught by default */
+	/* 0x13 - Reserved, Caught by default */
+	/* 0x14 - Reserved, Caught by default */
+	/* 0x15 - Reserved, Caught by default */
+	/* 0x16 - Reserved, Caught by default */
+	/* 0x17 - Reserved, Caught by default */
+	/* 0x18 - Reserved, Caught by default */
+	/* 0x19 - Reserved, Caught by default */
+	/* 0x1A - Reserved, Caught by default */
+	/* 0x1B - Reserved, Caught by default */
+	/* 0x1C - Reserved, Caught by default */
+	/* 0x1D - Reserved, Caught by default */
+	/* 0x1E - Reserved, Caught by default */
+	/* 0x1F - Reserved, Caught by default */
+	/* 0x20 - Reserved, Caught by default */
+	/* 0x21 - Undefined Instruction, handled here */
+	case VEC_UNDEF_I:
+#ifdef CONFIG_BUG
+		if (kernel_mode_regs(fp)) {
+			switch (report_bug(fp->pc, fp)) {
+			case BUG_TRAP_TYPE_NONE:
+				break;
+			case BUG_TRAP_TYPE_WARN:
+				dump_bfin_trace_buffer();
+				fp->pc += 2;
+				goto traps_done;
+			case BUG_TRAP_TYPE_BUG:
+				/* call to panic() will dump trace, and it is
+				 * off at this point, so it won't be clobbered
+				 */
+				panic("BUG()");
+			}
+		}
+#endif
+#ifdef CONFIG_BFIN_PSEUDODBG_INSNS
+		/*
+		 * Support for the fake instructions, if the instruction fails,
+		 * then just execute a illegal opcode failure (like normal).
+		 * Don't support these instructions inside the kernel
+		 */
+		if (!kernel_mode_regs(fp) && get_instruction(&opcode, (unsigned short *)fp->pc)) {
+			if (execute_pseudodbg_assert(fp, opcode))
+				goto traps_done;
+			if (execute_pseudodbg(fp, opcode))
+				goto traps_done;
+		}
+#endif
+		info.si_code = ILL_ILLOPC;
+		sig = SIGILL;
+		strerror = KERN_NOTICE EXC_0x21(KERN_NOTICE);
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+	/* 0x22 - Illegal Instruction Combination, handled here */
+	case VEC_ILGAL_I:
+		info.si_code = ILL_ILLPARAOP;
+		sig = SIGILL;
+		strerror = KERN_NOTICE EXC_0x22(KERN_NOTICE);
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+	/* 0x23 - Data CPLB protection violation, handled here */
+	case VEC_CPLB_VL:
+		info.si_code = ILL_CPLB_VI;
+		sig = SIGSEGV;
+		strerror = KERN_NOTICE EXC_0x23(KERN_NOTICE);
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+	/* 0x24 - Data access misaligned, handled here */
+	case VEC_MISALI_D:
+		info.si_code = BUS_ADRALN;
+		sig = SIGBUS;
+		strerror = KERN_NOTICE EXC_0x24(KERN_NOTICE);
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+	/* 0x25 - Unrecoverable Event, handled here */
+	case VEC_UNCOV:
+		info.si_code = ILL_ILLEXCPT;
+		sig = SIGILL;
+		strerror = KERN_NOTICE EXC_0x25(KERN_NOTICE);
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+	/* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr,
+		error case is handled here */
+	case VEC_CPLB_M:
+		info.si_code = BUS_ADRALN;
+		sig = SIGBUS;
+		strerror = KERN_NOTICE EXC_0x26(KERN_NOTICE);
+		break;
+	/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
+	case VEC_CPLB_MHIT:
+		info.si_code = ILL_CPLB_MULHIT;
+		sig = SIGSEGV;
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
+		if (cpu_pda[cpu].dcplb_fault_addr < FIXED_CODE_START)
+			strerror = KERN_NOTICE "NULL pointer access\n";
+		else
+#endif
+			strerror = KERN_NOTICE EXC_0x27(KERN_NOTICE);
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+	/* 0x28 - Emulation Watchpoint, handled here */
+	case VEC_WATCH:
+		info.si_code = TRAP_WATCHPT;
+		sig = SIGTRAP;
+		pr_debug(EXC_0x28(KERN_DEBUG));
+		CHK_DEBUGGER_TRAP_MAYBE();
+		/* Check if this is a watchpoint in kernel space */
+		if (kernel_mode_regs(fp))
+			goto traps_done;
+		else
+			break;
+#ifdef CONFIG_BF535
+	/* 0x29 - Instruction fetch access error (535 only) */
+	case VEC_ISTRU_VL:      /* ADSP-BF535 only (MH) */
+		info.si_code = BUS_OPFETCH;
+		sig = SIGBUS;
+		strerror = KERN_NOTICE "BF535: VEC_ISTRU_VL\n";
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+#else
+	/* 0x29 - Reserved, Caught by default */
+#endif
+	/* 0x2A - Instruction fetch misaligned, handled here */
+	case VEC_MISALI_I:
+		info.si_code = BUS_ADRALN;
+		sig = SIGBUS;
+		strerror = KERN_NOTICE EXC_0x2A(KERN_NOTICE);
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+	/* 0x2B - Instruction CPLB protection violation, handled here */
+	case VEC_CPLB_I_VL:
+		info.si_code = ILL_CPLB_VI;
+		sig = SIGBUS;
+		strerror = KERN_NOTICE EXC_0x2B(KERN_NOTICE);
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+	/* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */
+	case VEC_CPLB_I_M:
+		info.si_code = ILL_CPLB_MISS;
+		sig = SIGBUS;
+		strerror = KERN_NOTICE EXC_0x2C(KERN_NOTICE);
+		break;
+	/* 0x2D - Instruction CPLB Multiple Hits, handled here */
+	case VEC_CPLB_I_MHIT:
+		info.si_code = ILL_CPLB_MULHIT;
+		sig = SIGSEGV;
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
+		if (cpu_pda[cpu].icplb_fault_addr < FIXED_CODE_START)
+			strerror = KERN_NOTICE "Jump to NULL address\n";
+		else
+#endif
+			strerror = KERN_NOTICE EXC_0x2D(KERN_NOTICE);
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+	/* 0x2E - Illegal use of Supervisor Resource, handled here */
+	case VEC_ILL_RES:
+		info.si_code = ILL_PRVOPC;
+		sig = SIGILL;
+		strerror = KERN_NOTICE EXC_0x2E(KERN_NOTICE);
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+	/* 0x2F - Reserved, Caught by default */
+	/* 0x30 - Reserved, Caught by default */
+	/* 0x31 - Reserved, Caught by default */
+	/* 0x32 - Reserved, Caught by default */
+	/* 0x33 - Reserved, Caught by default */
+	/* 0x34 - Reserved, Caught by default */
+	/* 0x35 - Reserved, Caught by default */
+	/* 0x36 - Reserved, Caught by default */
+	/* 0x37 - Reserved, Caught by default */
+	/* 0x38 - Reserved, Caught by default */
+	/* 0x39 - Reserved, Caught by default */
+	/* 0x3A - Reserved, Caught by default */
+	/* 0x3B - Reserved, Caught by default */
+	/* 0x3C - Reserved, Caught by default */
+	/* 0x3D - Reserved, Caught by default */
+	/* 0x3E - Reserved, Caught by default */
+	/* 0x3F - Reserved, Caught by default */
+	case VEC_HWERR:
+		info.si_code = BUS_ADRALN;
+		sig = SIGBUS;
+		switch (fp->seqstat & SEQSTAT_HWERRCAUSE) {
+		/* System MMR Error */
+		case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR):
+			info.si_code = BUS_ADRALN;
+			sig = SIGBUS;
+			strerror = KERN_NOTICE HWC_x2(KERN_NOTICE);
+			break;
+		/* External Memory Addressing Error */
+		case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR):
+			if (ANOMALY_05000310) {
+				static unsigned long anomaly_rets;
+
+				if ((fp->pc >= (L1_CODE_START + L1_CODE_LENGTH - 512)) &&
+				    (fp->pc < (L1_CODE_START + L1_CODE_LENGTH))) {
+					/*
+					 * A false hardware error will happen while fetching at
+					 * the L1 instruction SRAM boundary.  Ignore it.
+					 */
+					anomaly_rets = fp->rets;
+					goto traps_done;
+				} else if (fp->rets == anomaly_rets) {
+					/*
+					 * While boundary code returns to a function, at the ret
+					 * point, a new false hardware error might occur too based
+					 * on tests.  Ignore it too.
+					 */
+					goto traps_done;
+				} else if ((fp->rets >= (L1_CODE_START + L1_CODE_LENGTH - 512)) &&
+				           (fp->rets < (L1_CODE_START + L1_CODE_LENGTH))) {
+					/*
+					 * If boundary code calls a function, at the entry point,
+					 * a new false hardware error maybe happen based on tests.
+					 * Ignore it too.
+					 */
+					goto traps_done;
+				} else
+					anomaly_rets = 0;
+			}
+
+			info.si_code = BUS_ADRERR;
+			sig = SIGBUS;
+			strerror = KERN_NOTICE HWC_x3(KERN_NOTICE);
+			break;
+		/* Performance Monitor Overflow */
+		case (SEQSTAT_HWERRCAUSE_PERF_FLOW):
+			strerror = KERN_NOTICE HWC_x12(KERN_NOTICE);
+			break;
+		/* RAISE 5 instruction */
+		case (SEQSTAT_HWERRCAUSE_RAISE_5):
+			printk(KERN_NOTICE HWC_x18(KERN_NOTICE));
+			break;
+		default:        /* Reserved */
+			printk(KERN_NOTICE HWC_default(KERN_NOTICE));
+			break;
+		}
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+	/*
+	 * We should be handling all known exception types above,
+	 * if we get here we hit a reserved one, so panic
+	 */
+	default:
+		info.si_code = ILL_ILLPARAOP;
+		sig = SIGILL;
+		verbose_printk(KERN_EMERG "Caught Unhandled Exception, code = %08lx\n",
+			(fp->seqstat & SEQSTAT_EXCAUSE));
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+	}
+
+	BUG_ON(sig == 0);
+
+	/* If the fault was caused by a kernel thread, or interrupt handler
+	 * we will kernel panic, so the system reboots.
+	 */
+	if (kernel_mode_regs(fp) || (current && !current->mm)) {
+		console_verbose();
+		oops_in_progress = 1;
+	}
+
+	if (sig != SIGTRAP) {
+		if (strerror)
+			verbose_printk(strerror);
+
+		dump_bfin_process(fp);
+		dump_bfin_mem(fp);
+		show_regs(fp);
+
+		/* Print out the trace buffer if it makes sense */
+#ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
+		if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
+			verbose_printk(KERN_NOTICE "No trace since you do not have "
+			       "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n\n");
+		else
+#endif
+			dump_bfin_trace_buffer();
+
+		if (oops_in_progress) {
+			/* Dump the current kernel stack */
+			verbose_printk(KERN_NOTICE "Kernel Stack\n");
+			show_stack(current, NULL);
+			print_modules();
+#ifndef CONFIG_ACCESS_CHECK
+			verbose_printk(KERN_EMERG "Please turn on "
+			       "CONFIG_ACCESS_CHECK\n");
+#endif
+			panic("Kernel exception");
+		} else {
+#ifdef CONFIG_DEBUG_VERBOSE
+			unsigned long *stack;
+			/* Dump the user space stack */
+			stack = (unsigned long *)rdusp();
+			verbose_printk(KERN_NOTICE "Userspace Stack\n");
+			show_stack(NULL, stack);
+#endif
+		}
+	}
+
+#ifdef CONFIG_IPIPE
+	if (!ipipe_trap_notify(fp->seqstat & 0x3f, fp))
+#endif
+	{
+		info.si_signo = sig;
+		info.si_errno = 0;
+		switch (trapnr) {
+		case VEC_CPLB_VL:
+		case VEC_MISALI_D:
+		case VEC_CPLB_M:
+		case VEC_CPLB_MHIT:
+			info.si_addr = (void __user *)cpu_pda[cpu].dcplb_fault_addr;
+			break;
+		default:
+			info.si_addr = (void __user *)fp->pc;
+			break;
+		}
+		force_sig_info(sig, &info, current);
+	}
+
+	if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) ||
+	    (ANOMALY_05000281 && trapnr == VEC_HWERR) ||
+	    (ANOMALY_05000189 && (trapnr == VEC_CPLB_I_VL || trapnr == VEC_CPLB_VL)))
+		fp->pc = SAFE_USER_INSTRUCTION;
+
+ traps_done:
+	trace_buffer_restore(j);
+}
+
+asmlinkage void double_fault_c(struct pt_regs *fp)
+{
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+	int j;
+	trace_buffer_save(j);
+#endif
+
+	console_verbose();
+	oops_in_progress = 1;
+#ifdef CONFIG_DEBUG_VERBOSE
+	printk(KERN_EMERG "Double Fault\n");
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
+	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
+		unsigned int cpu = raw_smp_processor_id();
+		char buf[150];
+		decode_address(buf, cpu_pda[cpu].retx_doublefault);
+		printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
+			(unsigned int)cpu_pda[cpu].seqstat_doublefault & SEQSTAT_EXCAUSE, buf);
+		decode_address(buf, cpu_pda[cpu].dcplb_doublefault_addr);
+		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %s\n", buf);
+		decode_address(buf, cpu_pda[cpu].icplb_doublefault_addr);
+		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %s\n", buf);
+
+		decode_address(buf, fp->retx);
+		printk(KERN_NOTICE "The instruction at %s caused a double exception\n", buf);
+	} else
+#endif
+	{
+		dump_bfin_process(fp);
+		dump_bfin_mem(fp);
+		show_regs(fp);
+		dump_bfin_trace_buffer();
+	}
+#endif
+	panic("Double Fault - unrecoverable event");
+
+}
+
+
+void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
+{
+	switch (cplb_panic) {
+	case CPLB_NO_UNLOCKED:
+		printk(KERN_EMERG "All CPLBs are locked\n");
+		break;
+	case CPLB_PROT_VIOL:
+		return;
+	case CPLB_NO_ADDR_MATCH:
+		return;
+	case CPLB_UNKNOWN_ERR:
+		printk(KERN_EMERG "Unknown CPLB Exception\n");
+		break;
+	}
+
+	oops_in_progress = 1;
+
+	dump_bfin_process(fp);
+	dump_bfin_mem(fp);
+	show_regs(fp);
+	dump_stack();
+	panic("Unrecoverable event");
+}
+
+#ifdef CONFIG_BUG
+int is_valid_bugaddr(unsigned long addr)
+{
+	unsigned int opcode;
+
+	if (!get_instruction(&opcode, (unsigned short *)addr))
+		return 0;
+
+	return opcode == BFIN_BUG_OPCODE;
+}
+#endif
+
+/* stub this out */
+#ifndef CONFIG_DEBUG_VERBOSE
+void show_regs(struct pt_regs *fp)
+{
+
+}
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/kernel/vmlinux.lds.S b/src/kernel/linux/v4.14/arch/blackfin/kernel/vmlinux.lds.S
new file mode 100644
index 0000000..334ef81
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/kernel/vmlinux.lds.S
@@ -0,0 +1,271 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/mem_map.h>
+#include <asm/page.h>
+#include <asm/thread_info.h>
+
+OUTPUT_FORMAT("elf32-bfin")
+ENTRY(__start)
+_jiffies = _jiffies_64;
+
+SECTIONS
+{
+#ifdef CONFIG_RAMKERNEL
+	. = CONFIG_BOOT_LOAD;
+#else
+	. = CONFIG_ROM_BASE;
+#endif
+
+	/* Neither the text, ro_data or bss section need to be aligned
+	 * So pack them back to back
+	 */
+	.text :
+	{
+		__text = .;
+		_text = .;
+		__stext = .;
+		TEXT_TEXT
+#ifndef CONFIG_SCHEDULE_L1
+		SCHED_TEXT
+#endif
+		CPUIDLE_TEXT
+		LOCK_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
+		KPROBES_TEXT
+#ifdef CONFIG_ROMKERNEL
+		__sinittext = .;
+		INIT_TEXT
+		__einittext = .;
+		EXIT_TEXT
+#endif
+		*(.text.*)
+		*(.fixup)
+
+#if !L1_CODE_LENGTH
+		*(.l1.text)
+#endif
+		__etext = .;
+	}
+
+	EXCEPTION_TABLE(4)
+	NOTES
+
+	/* Just in case the first read only is a 32-bit access */
+	RO_DATA(4)
+	__rodata_end = .;
+
+#ifdef CONFIG_ROMKERNEL
+	. = CONFIG_BOOT_LOAD;
+	.bss : AT(__rodata_end)
+#else
+	.bss :
+#endif
+	{
+		. = ALIGN(4);
+		___bss_start = .;
+		*(.bss .bss.*)
+		*(COMMON)
+#if !L1_DATA_A_LENGTH
+		*(.l1.bss)
+#endif
+#if !L1_DATA_B_LENGTH
+		*(.l1.bss.B)
+#endif
+		. = ALIGN(4);
+		___bss_stop = .;
+	}
+
+#if defined(CONFIG_ROMKERNEL)
+	.data : AT(LOADADDR(.bss) + SIZEOF(.bss))
+#else
+	.data :
+#endif
+	{
+		__sdata = .;
+		/* This gets done first, so the glob doesn't suck it in */
+		CACHELINE_ALIGNED_DATA(32)
+
+#if !L1_DATA_A_LENGTH
+		. = ALIGN(32);
+		*(.data_l1.cacheline_aligned)
+		*(.l1.data)
+#endif
+#if !L1_DATA_B_LENGTH
+		*(.l1.data.B)
+#endif
+#if !L2_LENGTH
+		. = ALIGN(32);
+		*(.data_l2.cacheline_aligned)
+		*(.l2.data)
+#endif
+
+		DATA_DATA
+		CONSTRUCTORS
+
+		INIT_TASK_DATA(THREAD_SIZE)
+
+		__edata = .;
+	}
+	__data_lma = LOADADDR(.data);
+	__data_len = SIZEOF(.data);
+
+	BUG_TABLE
+
+	/* The init section should be last, so when we free it, it goes into
+	 * the general memory pool, and (hopefully) will decrease fragmentation
+	 * a tiny bit. The init section has a _requirement_ that it be
+	 * PAGE_SIZE aligned
+	 */
+	. = ALIGN(PAGE_SIZE);
+	___init_begin = .;
+
+#ifdef CONFIG_RAMKERNEL
+	INIT_TEXT_SECTION(PAGE_SIZE)
+
+	/* We have to discard exit text and such at runtime, not link time, to
+	 * handle embedded cross-section references (alt instructions, bug
+	 * table, eh_frame, etc...).  We need all of our .text up front and
+	 * .data after it for PCREL call issues.
+	 */
+	.exit.text :
+	{
+		EXIT_TEXT
+	}
+
+	. = ALIGN(16);
+	INIT_DATA_SECTION(16)
+	PERCPU_SECTION(32)
+
+	.exit.data :
+	{
+		EXIT_DATA
+	}
+
+	.text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data))
+#else
+	.init.data : AT(__data_lma + __data_len + 32)
+	{
+		__sinitdata = .;
+		INIT_DATA
+		INIT_SETUP(16)
+		INIT_CALLS
+		CON_INITCALL
+		SECURITY_INITCALL
+		INIT_RAM_FS
+
+		. = ALIGN(PAGE_SIZE);
+		___per_cpu_load = .;
+		PERCPU_INPUT(32)
+
+		EXIT_DATA
+		__einitdata = .;
+	}
+	__init_data_lma = LOADADDR(.init.data);
+	__init_data_len = SIZEOF(.init.data);
+	__init_data_end = .;
+
+	.text_l1 L1_CODE_START : AT(__init_data_lma + __init_data_len)
+#endif
+	{
+		. = ALIGN(4);
+		__stext_l1 = .;
+		*(.l1.text.head)
+		*(.l1.text)
+#ifdef CONFIG_SCHEDULE_L1
+		SCHED_TEXT
+#endif
+		. = ALIGN(4);
+		__etext_l1 = .;
+	}
+	__text_l1_lma = LOADADDR(.text_l1);
+	__text_l1_len = SIZEOF(.text_l1);
+	ASSERT (__text_l1_len <= L1_CODE_LENGTH, "L1 text overflow!")
+
+	.data_l1 L1_DATA_A_START : AT(__text_l1_lma + __text_l1_len)
+	{
+		. = ALIGN(4);
+		__sdata_l1 = .;
+		*(.l1.data)
+		__edata_l1 = .;
+
+		. = ALIGN(32);
+		*(.data_l1.cacheline_aligned)
+
+		. = ALIGN(4);
+		__sbss_l1 = .;
+		*(.l1.bss)
+		. = ALIGN(4);
+		__ebss_l1 = .;
+	}
+	__data_l1_lma = LOADADDR(.data_l1);
+	__data_l1_len = SIZEOF(.data_l1);
+	ASSERT (__data_l1_len <= L1_DATA_A_LENGTH, "L1 data A overflow!")
+
+	.data_b_l1 L1_DATA_B_START : AT(__data_l1_lma + __data_l1_len)
+	{
+		. = ALIGN(4);
+		__sdata_b_l1 = .;
+		*(.l1.data.B)
+		__edata_b_l1 = .;
+
+		. = ALIGN(4);
+		__sbss_b_l1 = .;
+		*(.l1.bss.B)
+		. = ALIGN(4);
+		__ebss_b_l1 = .;
+	}
+	__data_b_l1_lma = LOADADDR(.data_b_l1);
+	__data_b_l1_len = SIZEOF(.data_b_l1);
+	ASSERT (__data_b_l1_len <= L1_DATA_B_LENGTH, "L1 data B overflow!")
+
+	.text_data_l2 L2_START : AT(__data_b_l1_lma + __data_b_l1_len)
+	{
+		. = ALIGN(4);
+		__stext_l2 = .;
+		*(.l2.text)
+		. = ALIGN(4);
+		__etext_l2 = .;
+
+		. = ALIGN(4);
+		__sdata_l2 = .;
+		*(.l2.data)
+		__edata_l2 = .;
+
+		. = ALIGN(32);
+		*(.data_l2.cacheline_aligned)
+
+		. = ALIGN(4);
+		__sbss_l2 = .;
+		*(.l2.bss)
+		. = ALIGN(4);
+		__ebss_l2 = .;
+	}
+	__l2_lma = LOADADDR(.text_data_l2);
+	__l2_len = SIZEOF(.text_data_l2);
+	ASSERT (__l2_len <= L2_LENGTH, "L2 overflow!")
+
+	/* Force trailing alignment of our init section so that when we
+	 * free our init memory, we don't leave behind a partial page.
+	 */
+#ifdef CONFIG_RAMKERNEL
+	. = __l2_lma + __l2_len;
+#else
+	. = __init_data_end;
+#endif
+	. = ALIGN(PAGE_SIZE);
+	___init_end = .;
+
+	__end =.;
+
+	STABS_DEBUG
+
+	DWARF_DEBUG
+
+	DISCARDS
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/Makefile b/src/kernel/linux/v4.14/arch/blackfin/lib/Makefile
new file mode 100644
index 0000000..74ddde0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# arch/blackfin/lib/Makefile
+#
+
+lib-y := \
+	ashldi3.o ashrdi3.o lshrdi3.o \
+	muldi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \
+	memcpy.o memset.o memcmp.o memchr.o memmove.o \
+	strcmp.o strcpy.o strncmp.o strncpy.o \
+	umulsi3_highpart.o smulsi3_highpart.o \
+	ins.o outs.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/ashldi3.c b/src/kernel/linux/v4.14/arch/blackfin/lib/ashldi3.c
new file mode 100644
index 0000000..ab69d87
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/ashldi3.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include "gcclib.h"
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+DItype __ashldi3(DItype u, word_type b)__attribute__((l1_text));
+#endif
+
+DItype __ashldi3(DItype u, word_type b)
+{
+	DIunion w;
+	word_type bm;
+	DIunion uu;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+
+	bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+	if (bm <= 0) {
+		w.s.low = 0;
+		w.s.high = (USItype) uu.s.low << -bm;
+	} else {
+		USItype carries = (USItype) uu.s.low >> bm;
+		w.s.low = (USItype) uu.s.low << b;
+		w.s.high = ((USItype) uu.s.high << b) | carries;
+	}
+
+	return w.ll;
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/ashrdi3.c b/src/kernel/linux/v4.14/arch/blackfin/lib/ashrdi3.c
new file mode 100644
index 0000000..b5b351e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/ashrdi3.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include "gcclib.h"
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+DItype __ashrdi3(DItype u, word_type b)__attribute__((l1_text));
+#endif
+
+DItype __ashrdi3(DItype u, word_type b)
+{
+	DIunion w;
+	word_type bm;
+	DIunion uu;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+
+	bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+	if (bm <= 0) {
+		/* w.s.high = 1..1 or 0..0 */
+		w.s.high = uu.s.high >> (sizeof(SItype) * BITS_PER_UNIT - 1);
+		w.s.low = uu.s.high >> -bm;
+	} else {
+		USItype carries = (USItype) uu.s.high << bm;
+		w.s.high = uu.s.high >> b;
+		w.s.low = ((USItype) uu.s.low >> b) | carries;
+	}
+
+	return w.ll;
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/divsi3.S b/src/kernel/linux/v4.14/arch/blackfin/lib/divsi3.S
new file mode 100644
index 0000000..ef2cd99
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/divsi3.S
@@ -0,0 +1,199 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ *
+ * 16 / 32 bit signed division.
+ *                 Special cases :
+ *                      1)  If(numerator == 0)
+ *                             return 0
+ *                      2)  If(denominator ==0)
+ *                             return positive max = 0x7fffffff
+ *                      3)  If(numerator == denominator)
+ *                             return 1
+ *                      4)  If(denominator ==1)
+ *                             return numerator
+ *                      5)  If(denominator == -1)
+ *                             return -numerator
+ *
+ *                 Operand         : R0 - Numerator   (i)
+ *                                   R1 - Denominator (i)
+ *                                   R0 - Quotient    (o)
+ *                 Registers Used : R2-R7,P0-P2
+ *
+ */
+
+.global   ___divsi3;
+.type ___divsi3, STT_FUNC;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2;
+___divsi3 :
+
+
+  R3 = R0 ^ R1;
+  R0 = ABS R0;
+
+  CC = V;
+
+  r3 = rot r3 by -1;
+  r1 = abs r1;      /* now both positive, r3.30 means "negate result",
+                    ** r3.31 means overflow, add one to result
+                    */
+  cc = r0 < r1;
+  if cc jump .Lret_zero;
+  r2 = r1 >> 15;
+  cc = r2;
+  if cc jump .Lidents;
+  r2 = r1 << 16;
+  cc = r2 <= r0;
+  if cc jump .Lidents;
+
+  DIVS(R0, R1);
+  DIVQ(R0, R1);
+  DIVQ(R0, R1);
+  DIVQ(R0, R1);
+  DIVQ(R0, R1);
+  DIVQ(R0, R1);
+  DIVQ(R0, R1);
+  DIVQ(R0, R1);
+  DIVQ(R0, R1);
+  DIVQ(R0, R1);
+  DIVQ(R0, R1);
+  DIVQ(R0, R1);
+  DIVQ(R0, R1);
+  DIVQ(R0, R1);
+  DIVQ(R0, R1);
+  DIVQ(R0, R1);
+  DIVQ(R0, R1);
+
+  R0 = R0.L (Z);
+  r1 = r3 >> 31;    /* add overflow issue back in */
+  r0 = r0 + r1;
+  r1 = -r0;
+  cc = bittst(r3, 30);
+  if cc r0 = r1;
+  RTS;
+
+/* Can't use the primitives. Test common identities.
+** If the identity is true, return the value in R2.
+*/
+
+.Lidents:
+  CC = R1 == 0;                   /* check for divide by zero */
+  IF CC JUMP .Lident_return;
+
+  CC = R0 == 0;                   /* check for division of zero */
+  IF CC JUMP .Lzero_return;
+
+  CC = R0 == R1;                  /* check for identical operands */
+  IF CC JUMP .Lident_return;
+
+  CC = R1 == 1;                   /* check for divide by 1 */
+  IF CC JUMP .Lident_return;
+
+  R2.L = ONES R1;
+  R2 = R2.L (Z);
+  CC = R2 == 1;
+  IF CC JUMP .Lpower_of_two;
+
+  /* Identities haven't helped either.
+  ** Perform the full division process.
+  */
+
+  P1 = 31;                        /* Set loop counter   */
+
+  [--SP] = (R7:5);                /* Push registers R5-R7 */
+  R2 = -R1;
+  [--SP] = R2;
+  R2 = R0 << 1;                   /* R2 lsw of dividend  */
+  R6 = R0 ^ R1;                   /* Get sign */
+  R5 = R6 >> 31;                  /* Shift sign to LSB */
+
+  R0 = 0 ;                        /* Clear msw partial remainder */
+  R2 = R2 | R5;                   /* Shift quotient bit */
+  R6 = R0 ^ R1;                   /* Get new quotient bit */
+
+  LSETUP(.Llst,.Llend)  LC0 = P1;   /* Setup loop */
+.Llst:   R7 = R2 >> 31;            /* record copy of carry from R2 */
+        R2 = R2 << 1;             /* Shift 64 bit dividend up by 1 bit */
+        R0 = R0 << 1 || R5 = [SP];
+        R0 = R0 | R7;             /* and add carry */
+        CC = R6 < 0;              /* Check quotient(AQ) */
+                                  /* we might be subtracting divisor (AQ==0) */
+        IF CC R5 = R1;            /* or we might be adding divisor  (AQ==1)*/
+        R0 = R0 + R5;             /* do add or subtract, as indicated by AQ */
+        R6 = R0 ^ R1;             /* Generate next quotient bit */
+        R5 = R6 >> 31;
+                                  /* Assume AQ==1, shift in zero */
+        BITTGL(R5,0);             /* tweak AQ to be what we want to shift in */
+.Llend:  R2 = R2 + R5;             /* and then set shifted-in value to
+                                  ** tweaked AQ.
+                                  */
+  r1 = r3 >> 31;
+  r2 = r2 + r1;
+  cc = bittst(r3,30);
+  r0 = -r2;
+  if !cc r0 = r2;
+  SP += 4;
+  (R7:5)= [SP++];                 /* Pop registers R6-R7 */
+  RTS;
+
+.Lident_return:
+  CC = R1 == 0;                   /* check for divide by zero  => 0x7fffffff */
+  R2 = -1 (X);
+  R2 >>= 1;
+  IF CC JUMP .Ltrue_ident_return;
+
+  CC = R0 == R1;                  /* check for identical operands => 1 */
+  R2 = 1 (Z);
+  IF CC JUMP .Ltrue_ident_return;
+
+  R2 = R0;                        /* assume divide by 1 => numerator */
+  /*FALLTHRU*/
+
+.Ltrue_ident_return:
+  R0 = R2;                        /* Return an identity value */
+  R2 = -R2;
+  CC = bittst(R3,30);
+  IF CC R0 = R2;
+.Lzero_return:
+  RTS;                            /* ...including zero */
+
+.Lpower_of_two:
+  /* Y has a single bit set, which means it's a power of two.
+  ** That means we can perform the division just by shifting
+  ** X to the right the appropriate number of bits
+  */
+
+  /* signbits returns the number of sign bits, minus one.
+  ** 1=>30, 2=>29, ..., 0x40000000=>0. Which means we need
+  ** to shift right n-signbits spaces. It also means 0x80000000
+  ** is a special case, because that *also* gives a signbits of 0
+  */
+
+  R2 = R0 >> 31;
+  CC = R1 < 0;
+  IF CC JUMP .Ltrue_ident_return;
+
+  R1.l = SIGNBITS R1;
+  R1 = R1.L (Z);
+  R1 += -30;
+  R0 = LSHIFT R0 by R1.L;
+  r1 = r3 >> 31;
+  r0 = r0 + r1;
+  R2 = -R0;                       // negate result if necessary
+  CC = bittst(R3,30);
+  IF CC R0 = R2;
+  RTS;
+
+.Lret_zero:
+  R0 = 0;
+  RTS;
+
+.size ___divsi3, .-___divsi3
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/gcclib.h b/src/kernel/linux/v4.14/arch/blackfin/lib/gcclib.h
new file mode 100644
index 0000000..724f07f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/gcclib.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#define BITS_PER_UNIT  8
+#define SI_TYPE_SIZE (sizeof (SItype) * BITS_PER_UNIT)
+
+typedef unsigned int UQItype __attribute__ ((mode(QI)));
+typedef int SItype __attribute__ ((mode(SI)));
+typedef unsigned int USItype __attribute__ ((mode(SI)));
+typedef int DItype __attribute__ ((mode(DI)));
+typedef int word_type __attribute__ ((mode(__word__)));
+typedef unsigned int UDItype __attribute__ ((mode(DI)));
+
+struct DIstruct {
+	SItype low, high;
+};
+
+typedef union {
+	struct DIstruct s;
+	DItype ll;
+} DIunion;
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/ins.S b/src/kernel/linux/v4.14/arch/blackfin/lib/ins.S
new file mode 100644
index 0000000..d59608d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/ins.S
@@ -0,0 +1,118 @@
+/*
+ * arch/blackfin/lib/ins.S - ins{bwl} using hardware loops
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+
+.align 2
+
+#ifdef CONFIG_IPIPE
+# define DO_CLI \
+	[--sp] = rets; \
+	[--sp] = (P5:0); \
+	sp += -12; \
+	call ___ipipe_disable_root_irqs_hw; \
+	sp += 12; \
+	(P5:0) = [sp++];
+# define CLI_INNER_NOP
+#else
+# define DO_CLI cli R3;
+# define CLI_INNER_NOP nop; nop; nop;
+#endif
+
+#ifdef CONFIG_IPIPE
+# define DO_STI \
+	sp += -12; \
+	call ___ipipe_enable_root_irqs_hw; \
+	sp += 12; \
+2:	rets = [sp++];
+#else
+# define DO_STI 2: sti R3;
+#endif
+
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
+# define CLI_OUTER DO_CLI;
+# define STI_OUTER DO_STI;
+# define CLI_INNER 1:
+# if ANOMALY_05000416
+#  define STI_INNER nop; 2: nop;
+# else
+#  define STI_INNER 2:
+# endif
+#else
+# define CLI_OUTER
+# define STI_OUTER
+# define CLI_INNER 1: DO_CLI; CLI_INNER_NOP;
+# define STI_INNER DO_STI;
+#endif
+
+/*
+ * Reads on the Blackfin are speculative. In Blackfin terms, this means they
+ * can be interrupted at any time (even after they have been issued on to the
+ * external bus), and re-issued after the interrupt occurs.
+ *
+ * If a FIFO is sitting on the end of the read, it will see two reads,
+ * when the core only sees one. The FIFO receives the read which is cancelled,
+ * and not delivered to the core.
+ *
+ * To solve this, interrupts are turned off before reads occur to I/O space.
+ * There are 3 versions of all these functions
+ *  - turns interrupts off every read (higher overhead, but lower latency)
+ *  - turns interrupts off every loop (low overhead, but longer latency)
+ *  - DMA version, which do not suffer from this issue. DMA versions have
+ *      different name (prefixed by dma_ ), and are located in
+ *      ../kernel/bfin_dma.c
+ * Using the dma related functions are recommended for transferring large
+ * buffers in/out of FIFOs.
+ */
+
+#define COMMON_INS(func, ops) \
+ENTRY(_ins##func) \
+	P0 = R0;	/* P0 = port */ \
+	CLI_OUTER;	/* 3 instructions before first read access */ \
+	P1 = R1;	/* P1 = address */ \
+	P2 = R2;	/* P2 = count */ \
+	SSYNC; \
+ \
+	LSETUP(1f, 2f) LC0 = P2; \
+	CLI_INNER; \
+	ops; \
+	STI_INNER; \
+ \
+	STI_OUTER; \
+	RTS; \
+ENDPROC(_ins##func)
+
+COMMON_INS(l, \
+	R0 = [P0]; \
+	[P1++] = R0; \
+)
+
+COMMON_INS(w, \
+	R0 = W[P0]; \
+	W[P1++] = R0; \
+)
+
+COMMON_INS(w_8, \
+	R0 = W[P0]; \
+	B[P1++] = R0; \
+	R0 = R0 >> 8; \
+	B[P1++] = R0; \
+)
+
+COMMON_INS(b, \
+	R0 = B[P0]; \
+	B[P1++] = R0; \
+)
+
+COMMON_INS(l_16, \
+	R0 = [P0]; \
+	W[P1++] = R0; \
+	R0 = R0 >> 16; \
+	W[P1++] = R0; \
+)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/lshrdi3.c b/src/kernel/linux/v4.14/arch/blackfin/lib/lshrdi3.c
new file mode 100644
index 0000000..53f1741
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/lshrdi3.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include "gcclib.h"
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+DItype __lshrdi3(DItype u, word_type b)__attribute__((l1_text));
+#endif
+
+DItype __lshrdi3(DItype u, word_type b)
+{
+	DIunion w;
+	word_type bm;
+	DIunion uu;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+
+	bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+	if (bm <= 0) {
+		w.s.high = 0;
+		w.s.low = (USItype) uu.s.high >> -bm;
+	} else {
+		USItype carries = (USItype) uu.s.high << bm;
+		w.s.high = (USItype) uu.s.high >> b;
+		w.s.low = ((USItype) uu.s.low >> b) | carries;
+	}
+
+	return w.ll;
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/memchr.S b/src/kernel/linux/v4.14/arch/blackfin/lib/memchr.S
new file mode 100644
index 0000000..bcfc8a1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/memchr.S
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2005-2009 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+/* void *memchr(const void *s, int c, size_t n);
+ * R0 = address (s)
+ * R1 = sought byte (c)
+ * R2 = count (n)
+ *
+ * Returns pointer to located character.
+ */
+
+.text
+
+.align 2
+
+ENTRY(_memchr)
+	P0 = R0;		/* P0 = address */
+	P2 = R2;		/* P2 = count */
+	R1 = R1.B(Z);
+	CC = R2 == 0;
+	IF CC JUMP .Lfailed;
+
+.Lbytes:
+	LSETUP (.Lbyte_loop_s, .Lbyte_loop_e) LC0=P2;
+
+.Lbyte_loop_s:
+	R3 = B[P0++](Z);
+	CC = R3 == R1;
+	IF CC JUMP .Lfound;
+.Lbyte_loop_e:
+	NOP;
+
+.Lfailed:
+	R0=0;
+	RTS;
+
+.Lfound:
+	R0 = P0;
+	R0 += -1;
+	RTS;
+
+ENDPROC(_memchr)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/memcmp.S b/src/kernel/linux/v4.14/arch/blackfin/lib/memcmp.S
new file mode 100644
index 0000000..2e1c947
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/memcmp.S
@@ -0,0 +1,92 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+/* int memcmp(const void *s1, const void *s2, size_t n);
+ * R0 = First Address (s1)
+ * R1 = Second Address (s2)
+ * R2 = count (n)
+ *
+ * Favours word aligned data.
+ */
+
+.text
+
+.align 2
+
+ENTRY(_memcmp)
+	I1 = P3;
+	P0 = R0;			/* P0 = s1 address */
+	P3 = R1;			/* P3 = s2 Address  */
+	P2 = R2 ;			/* P2 = count */
+	CC = R2 <= 7(IU);
+	IF CC JUMP .Ltoo_small;
+	I0 = R1;			/* s2 */
+	R1 = R1 | R0;		/* OR addresses together */
+	R1 <<= 30;		/* check bottom two bits */
+	CC =  AZ;			/* AZ set if zero. */
+	IF !CC JUMP .Lbytes ;	/* Jump if addrs not aligned. */
+
+	P1 = P2 >> 2;		/* count = n/4 */
+	R3 =  3;
+	R2 = R2 & R3;		/* remainder */
+	P2 = R2;			/* set remainder */
+
+	LSETUP (.Lquad_loop_s, .Lquad_loop_e) LC0=P1;
+.Lquad_loop_s:
+#if ANOMALY_05000202
+	R0 = [P0++];
+	R1 = [I0++];
+#else
+	MNOP || R0 = [P0++] || R1 = [I0++];
+#endif
+	CC = R0 == R1;
+	IF !CC JUMP .Lquad_different;
+.Lquad_loop_e:
+	NOP;
+
+	P3 = I0;			/* s2 */
+.Ltoo_small:
+	CC = P2 == 0;		/* Check zero count*/
+	IF CC JUMP .Lfinished;	/* very unlikely*/
+
+.Lbytes:
+	LSETUP (.Lbyte_loop_s, .Lbyte_loop_e) LC0=P2;
+.Lbyte_loop_s:
+	R1 = B[P3++](Z);	/* *s2 */
+	R0 = B[P0++](Z);	/* *s1 */
+	CC = R0 == R1;
+	IF !CC JUMP .Ldifferent;
+.Lbyte_loop_e:
+	NOP;
+
+.Ldifferent:
+	R0 = R0 - R1;
+	P3 = I1;
+	RTS;
+
+.Lquad_different:
+	/* We've read two quads which don't match.
+	 * Can't just compare them, because we're
+	 * a little-endian machine, so the MSBs of
+	 * the regs occur at later addresses in the
+	 * string.
+	 * Arrange to re-read those two quads again,
+	 * byte-by-byte.
+	 */
+	P0 += -4;		/* back up to the start of the */
+	P3 = I0;		/* quads, and increase the*/
+	P2 += 4;		/* remainder count*/
+	P3 += -4;
+	JUMP .Lbytes;
+
+.Lfinished:
+	R0 = 0;
+	P3 = I1;
+	RTS;
+
+ENDPROC(_memcmp)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/memcpy.S b/src/kernel/linux/v4.14/arch/blackfin/lib/memcpy.S
new file mode 100644
index 0000000..53cb369
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/memcpy.S
@@ -0,0 +1,124 @@
+/*
+ * internal version of memcpy(), issued by the compiler to copy blocks of
+ * data around. This is really memmove() - it has to be able to deal with
+ * possible overlaps, because that ambiguity is when the compiler gives up
+ * and calls a function. We have our own, internal version so that we get
+ * something we trust, even if the user has redefined the normal symbol.
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+/* void *memcpy(void *dest, const void *src, size_t n);
+ * R0 = To Address (dest) (leave unchanged to form result)
+ * R1 = From Address (src)
+ * R2 = count
+ *
+ * Note: Favours word alignment
+ */
+
+#ifdef CONFIG_MEMCPY_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_memcpy)
+	CC = R2 <=  0;	/* length not positive? */
+	IF CC JUMP .L_P1L2147483647;	/* Nothing to do */
+
+	P0 = R0 ;	/* dst*/
+	P1 = R1 ;	/* src*/
+	P2 = R2 ;	/* length */
+
+	/* check for overlapping data */
+	CC = R1 < R0;	/* src < dst */
+	IF !CC JUMP .Lno_overlap;
+	R3 = R1 + R2;
+	CC = R0 < R3;	/* and dst < src+len */
+	IF CC JUMP .Lhas_overlap;
+
+.Lno_overlap:
+	/* Check for aligned data.*/
+
+	R3 = R1 | R0;
+	R1 = 0x3;
+	R3 = R3 & R1;
+	CC = R3;	/* low bits set on either address? */
+	IF CC JUMP .Lnot_aligned;
+
+	/* Both addresses are word-aligned, so we can copy
+	at least part of the data using word copies.*/
+	P2 = P2 >> 2;
+	CC = P2 <= 2;
+	IF !CC JUMP .Lmore_than_seven;
+	/* less than eight bytes... */
+	P2 = R2;
+	LSETUP(.Lthree_start, .Lthree_end) LC0=P2;
+.Lthree_start:
+	R3 = B[P1++] (X);
+.Lthree_end:
+	B[P0++] = R3;
+
+	RTS;
+
+.Lmore_than_seven:
+	/* There's at least eight bytes to copy. */
+	P2 += -1;	/* because we unroll one iteration */
+	LSETUP(.Lword_loops, .Lword_loope) LC0=P2;
+	I1 = P1;
+	R3 = [I1++];
+#if ANOMALY_05000202
+.Lword_loops:
+	[P0++] = R3;
+.Lword_loope:
+	R3 = [I1++];
+#else
+.Lword_loops:
+.Lword_loope:
+	MNOP || [P0++] = R3 || R3 = [I1++];
+#endif
+	[P0++] = R3;
+	/* Any remaining bytes to copy? */
+	R3 = 0x3;
+	R3 = R2 & R3;
+	CC = R3 == 0;
+	P1 = I1;	/* in case there's something left, */
+	IF !CC JUMP .Lbytes_left;
+	RTS;
+.Lbytes_left:	P2 = R3;
+.Lnot_aligned:
+	/* From here, we're copying byte-by-byte. */
+	LSETUP (.Lbyte_start, .Lbyte_end) LC0=P2;
+.Lbyte_start:
+	R1 = B[P1++] (X);
+.Lbyte_end:
+	B[P0++] = R1;
+
+.L_P1L2147483647:
+	RTS;
+
+.Lhas_overlap:
+	/* Need to reverse the copying, because the
+	 * dst would clobber the src.
+	 * Don't bother to work out alignment for
+	 * the reverse case.
+	 */
+	P0 = P0 + P2;
+	P0 += -1;
+	P1 = P1 + P2;
+	P1 += -1;
+	LSETUP(.Lover_start, .Lover_end) LC0=P2;
+.Lover_start:
+	R1 = B[P1--] (X);
+.Lover_end:
+	B[P0--] = R1;
+
+	RTS;
+
+ENDPROC(_memcpy)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/memmove.S b/src/kernel/linux/v4.14/arch/blackfin/lib/memmove.S
new file mode 100644
index 0000000..e0b7820
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/memmove.S
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2005-2009 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+.align 2
+
+/*
+ * C Library function MEMMOVE
+ * R0 = To Address (leave unchanged to form result)
+ * R1 = From Address
+ * R2 = count
+ * Data may overlap
+ */
+
+ENTRY(_memmove)
+	I1 = P3;
+	P0 = R0;                  /* P0 = To address */
+	P3 = R1;                  /* P3 = From Address */
+	P2 = R2;                  /* P2 = count */
+	CC = P2 == 0;             /* Check zero count*/
+	IF CC JUMP .Lfinished;    /* very unlikely */
+
+	CC = R1 < R0 (IU);        /* From < To */
+	IF !CC JUMP .Lno_overlap;
+	R3 = R1 + R2;
+	CC = R0 <= R3 (IU);       /* (From+len) >= To */
+	IF CC JUMP .Loverlap;
+.Lno_overlap:
+	R3 = 11;
+	CC = R2 <= R3;
+	IF CC JUMP .Lbytes;
+	R3 = R1 | R0;             /* OR addresses together */
+	R3 <<= 30;                /* check bottom two bits */
+	CC =  AZ;                 /* AZ set if zero.*/
+	IF !CC JUMP .Lbytes;      /* Jump if addrs not aligned.*/
+
+	I0 = P3;
+	P1 = P2 >> 2;             /* count = n/4 */
+	P1 += -1;
+	R3 =  3;
+	R2 = R2 & R3;             /* remainder */
+	P2 = R2;                  /* set remainder */
+	R1 = [I0++];
+
+	LSETUP (.Lquad_loops, .Lquad_loope) LC0=P1;
+#if ANOMALY_05000202
+.Lquad_loops:
+	[P0++] = R1;
+.Lquad_loope:
+	R1 = [I0++];
+#else
+.Lquad_loops:
+.Lquad_loope:
+	 MNOP || [P0++] = R1 || R1 = [I0++];
+#endif
+	[P0++] = R1;
+
+	CC = P2 == 0;             /* any remaining bytes? */
+	P3 = I0;                  /* Amend P3 to updated ptr. */
+	IF !CC JUMP .Lbytes;
+	P3 = I1;
+	RTS;
+
+.Lbytes:     LSETUP (.Lbyte2_s, .Lbyte2_e) LC0=P2;
+.Lbyte2_s:   R1 = B[P3++](Z);
+.Lbyte2_e:   B[P0++] = R1;
+
+.Lfinished:  P3 = I1;
+	RTS;
+
+.Loverlap:
+	P2 += -1;
+	P0 = P0 + P2;
+	P3 = P3 + P2;
+	R1 = B[P3--] (Z);
+	CC = P2 == 0;
+	IF CC JUMP .Lno_loop;
+#if ANOMALY_05000245
+	NOP;
+	NOP;
+#endif
+	LSETUP (.Lol_s, .Lol_e) LC0 = P2;
+.Lol_s:    B[P0--] = R1;
+.Lol_e:    R1 = B[P3--] (Z);
+.Lno_loop: B[P0] = R1;
+	P3 = I1;
+	RTS;
+
+ENDPROC(_memmove)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/memset.S b/src/kernel/linux/v4.14/arch/blackfin/lib/memset.S
new file mode 100644
index 0000000..cdcf914
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/memset.S
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+.align 2
+
+#ifdef CONFIG_MEMSET_L1
+.section .l1.text
+#else
+.text
+#endif
+
+/*
+ * C Library function MEMSET
+ * R0 = address (leave unchanged to form result)
+ * R1 = filler byte
+ * R2 = count
+ * Favours word aligned data.
+ * The strncpy assumes that I0 and I1 are not used in this function
+ */
+
+ENTRY(_memset)
+	P0 = R0 ;              /* P0 = address */
+	P2 = R2 ;              /* P2 = count   */
+	R3 = R0 + R2;          /* end          */
+	CC = R2 <= 7(IU);
+	IF CC JUMP  .Ltoo_small;
+	R1 = R1.B (Z);         /* R1 = fill char */
+	R2 =  3;
+	R2 = R0 & R2;          /* addr bottom two bits */
+	CC =  R2 == 0;             /* AZ set if zero.	*/
+	IF !CC JUMP  .Lforce_align ;  /* Jump if addr not aligned. */
+
+.Laligned:
+	P1 = P2 >> 2;          /* count = n/4        */
+	R2 = R1 <<  8;         /* create quad filler */
+	R2.L = R2.L + R1.L(NS);
+	R2.H = R2.L + R1.H(NS);
+	P2 = R3;
+
+	LSETUP (.Lquad_loop , .Lquad_loop) LC0=P1;
+.Lquad_loop:
+	[P0++] = R2;
+
+	CC = P0 == P2;
+	IF !CC JUMP .Lbytes_left;
+	RTS;
+
+.Lbytes_left:
+	R2 = R3;                /* end point */
+	R3 = P0;                /* current position */
+	R2 = R2 - R3;           /* bytes left */
+	P2 = R2;
+
+.Ltoo_small:
+	CC = P2 == 0;           /* Check zero count */
+	IF CC JUMP .Lfinished;    /* Unusual */
+
+.Lbytes:
+	LSETUP (.Lbyte_loop , .Lbyte_loop) LC0=P2;
+.Lbyte_loop:
+	B[P0++] = R1;
+
+.Lfinished:
+	RTS;
+
+.Lforce_align:
+	CC = BITTST (R0, 0);  /* odd byte */
+	R0 = 4;
+	R0 = R0 - R2;
+	P1 = R0;
+	R0 = P0;		    /* Recover return address */
+	IF !CC JUMP .Lskip1;
+	B[P0++] = R1;
+.Lskip1:
+	CC = R2 <= 2;          /* 2 bytes */
+	P2 -= P1;              /* reduce count */
+	IF !CC JUMP .Laligned;
+	B[P0++] = R1;
+	B[P0++] = R1;
+	JUMP .Laligned;
+
+ENDPROC(_memset)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/modsi3.S b/src/kernel/linux/v4.14/arch/blackfin/lib/modsi3.S
new file mode 100644
index 0000000..f7026ce
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/modsi3.S
@@ -0,0 +1,57 @@
+/*
+ * This program computes 32 bit signed remainder. It calls div32 function
+ * for quotient estimation.
+ *   Registers in:  R0, R1 = Numerator/ Denominator
+ *   Registers out: R0     = Remainder
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+.global ___modsi3;
+.type ___modsi3, STT_FUNC;
+.extern ___divsi3;
+.type ___divsi3, STT_FUNC;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+___modsi3:
+
+	CC=R0==0;
+	IF CC JUMP .LRETURN_R0;		/* Return 0, if numerator  == 0 */
+	CC=R1==0;
+	IF CC JUMP .LRETURN_ZERO;		/* Return 0, if denominator == 0 */
+	CC=R0==R1;
+	IF CC JUMP .LRETURN_ZERO;		/* Return 0, if numerator == denominator */
+	CC = R1 == 1;
+	IF CC JUMP .LRETURN_ZERO;		/* Return 0, if denominator ==  1 */
+	CC = R1 == -1;
+	IF CC JUMP .LRETURN_ZERO;		/* Return 0, if denominator == -1 */
+
+	/* Valid input. Use __divsi3() to compute the quotient, and then
+	 * derive the remainder from that. */
+
+	[--SP] = (R7:6);		/* Push  R7 and R6 */
+	[--SP] = RETS;			/* and return address */
+	R7 = R0;			/* Copy of R0 */
+	R6 = R1;			/* Save for later */
+	SP += -12;			/* Should always provide this space */
+	CALL ___divsi3;			/* Compute signed quotient using ___divsi3()*/
+	SP += 12;
+	R0 *= R6;			/* Quotient * divisor */
+	R0 = R7 - R0;			/* Dividend - (quotient * divisor) */
+	RETS = [SP++];			/* Get back return address */
+	(R7:6) = [SP++];		/* Pop registers R7 and R4 */
+	RTS;				/* Store remainder    */
+
+.LRETURN_ZERO:
+	R0 = 0;
+.LRETURN_R0:
+	RTS;
+
+.size ___modsi3, .-___modsi3
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/muldi3.S b/src/kernel/linux/v4.14/arch/blackfin/lib/muldi3.S
new file mode 100644
index 0000000..abf9b2a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/muldi3.S
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+.align 2
+.global ___muldi3;
+.type ___muldi3, STT_FUNC;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+/*
+	   R1:R0 * R3:R2
+	 = R1.h:R1.l:R0.h:R0.l * R3.h:R3.l:R2.h:R2.l
+[X]	 = (R1.h * R3.h) * 2^96
+[X]	   + (R1.h * R3.l + R1.l * R3.h) * 2^80
+[X]	   + (R1.h * R2.h + R1.l * R3.l + R3.h * R0.h) * 2^64
+[T1]	   + (R1.h * R2.l + R3.h * R0.l + R1.l * R2.h + R3.l * R0.h) * 2^48
+[T2]	   + (R1.l * R2.l + R3.l * R0.l + R0.h * R2.h) * 2^32
+[T3]	   + (R0.l * R2.h + R2.l * R0.h) * 2^16
+[T4]	   + (R0.l * R2.l)
+
+	We can discard the first three lines marked "X" since we produce
+	only a 64 bit result.  So, we need ten 16-bit multiplies.
+
+	Individual mul-acc results:
+[E1]	 =  R1.h * R2.l + R3.h * R0.l + R1.l * R2.h + R3.l * R0.h
+[E2]	 =  R1.l * R2.l + R3.l * R0.l + R0.h * R2.h
+[E3]	 =  R0.l * R2.h + R2.l * R0.h
+[E4]	 =  R0.l * R2.l
+
+	We also need to add high parts from lower-level results to higher ones:
+	E[n]c = E[n] + (E[n+1]c >> 16), where E4c := E4
+
+	One interesting property is that all parts of the result that depend
+	on the sign of the multiplication are discarded.  Those would be the
+	multiplications involving R1.h and R3.h, but only the top 16 bit of
+	the 32 bit result depend on the sign, and since R1.h and R3.h only
+	occur in E1, the top half of these results is cut off.
+	So, we can just use FU mode for all of the 16-bit multiplies, and
+	ignore questions of when to use mixed mode.  */
+
+___muldi3:
+	/* [SP] technically is part of the caller's frame, but we can
+	   use it as scratch space.  */
+	A0 = R2.H * R1.L, A1 = R2.L * R1.H (FU) || R3 = [SP + 12];	/* E1 */
+	A0 += R3.H * R0.L, A1 += R3.L * R0.H (FU) || [SP] = R4;		/* E1 */
+	A0 += A1;							/* E1 */
+	R4 = A0.w;
+	A0 = R0.l * R3.l (FU);						/* E2 */
+	A0 += R2.l * R1.l (FU);						/* E2 */
+
+	A1 = R2.L * R0.L (FU);						/* E4 */
+	R3 = A1.w;
+	A1 = A1 >> 16;							/* E3c */
+	A0 += R2.H * R0.H, A1 += R2.L * R0.H (FU);			/* E2, E3c */
+	A1 += R0.L * R2.H (FU);						/* E3c */
+	R0 = A1.w;
+	A1 = A1 >> 16;							/* E2c */
+	A0 += A1;							/* E2c */
+	R1 = A0.w;
+
+	/* low(result) = low(E3c):low(E4) */
+	R0 = PACK (R0.l, R3.l);
+	/* high(result) = E2c + (E1 << 16) */
+	R1.h = R1.h + R4.l (NS) || R4 = [SP];
+	RTS;
+
+.size ___muldi3, .-___muldi3
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/outs.S b/src/kernel/linux/v4.14/arch/blackfin/lib/outs.S
new file mode 100644
index 0000000..06a5e67
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/outs.S
@@ -0,0 +1,68 @@
+/*
+ * Implementation of outs{bwl} for BlackFin processors using zero overhead loops.
+ *
+ * Copyright 2005-2009 Analog Devices Inc.
+ *                2005 BuyWays BV
+ *                      Bas Vermeulen <bas@buyways.nl>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/linkage.h>
+
+.align 2
+
+ENTRY(_outsl)
+	CC = R2 == 0;
+	IF CC JUMP 1f;
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+
+	LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
+.Llong_loop_s: R0 = [P1++];
+.Llong_loop_e: [P0] = R0;
+1:	RTS;
+ENDPROC(_outsl)
+
+ENTRY(_outsw)
+	CC = R2 == 0;
+	IF CC JUMP 1f;
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+
+	LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
+.Lword_loop_s: R0 = W[P1++];
+.Lword_loop_e: W[P0] = R0;
+1:	RTS;
+ENDPROC(_outsw)
+
+ENTRY(_outsb)
+	CC = R2 == 0;
+	IF CC JUMP 1f;
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+
+	LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
+.Lbyte_loop_s: R0 = B[P1++];
+.Lbyte_loop_e: B[P0] = R0;
+1:	RTS;
+ENDPROC(_outsb)
+
+ENTRY(_outsw_8)
+	CC = R2 == 0;
+	IF CC JUMP 1f;
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+
+	LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
+.Lword8_loop_s: R1 = B[P1++];
+		R0 = B[P1++];
+		R0 = R0 << 8;
+		R0 = R0 + R1;
+.Lword8_loop_e: W[P0] = R0;
+1:	RTS;
+ENDPROC(_outsw_8)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/smulsi3_highpart.S b/src/kernel/linux/v4.14/arch/blackfin/lib/smulsi3_highpart.S
new file mode 100644
index 0000000..e50d6c4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/smulsi3_highpart.S
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2007 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+.align 2
+.global ___smulsi3_highpart;
+.type ___smulsi3_highpart, STT_FUNC;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+___smulsi3_highpart:
+	R2 = R1.L * R0.L (FU);
+	R3 = R1.H * R0.L (IS,M);
+	R0 = R0.H * R1.H, R1 = R0.H * R1.L (IS,M);
+
+	R1.L = R2.H + R1.L;
+	cc = ac0;
+	R2 = cc;
+
+	R1.L = R1.L + R3.L;
+	cc = ac0;
+	R1 >>>= 16;
+	R3 >>>= 16;
+	R1 = R1 + R3;
+	R1 = R1 + R2;
+	R2 = cc;
+	R1 = R1 + R2;
+
+	R0 = R0 + R1;
+	RTS;
+
+.size ___smulsi3_highpart, .-___smulsi3_highpart
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/strcmp.S b/src/kernel/linux/v4.14/arch/blackfin/lib/strcmp.S
new file mode 100644
index 0000000..9c8b986
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/strcmp.S
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+/* void *strcmp(char *s1, const char *s2);
+ * R0 = address (s1)
+ * R1 = address (s2)
+ *
+ * Returns an integer less than, equal to, or greater than zero if s1
+ *  (or the first n  bytes thereof) is found, respectively, to be less
+ *  than, to match, or be greater than s2.
+ */
+
+#ifdef CONFIG_STRCMP_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_strcmp)
+	P0 = R0 ;       /* s1 */
+	P1 = R1 ;       /* s2 */
+
+1:
+	R0 = B[P0++] (Z);      /* get *s1 */
+	R1 = B[P1++] (Z);      /* get *s2 */
+	CC = R0 == R1;         /* compare a byte */
+	if ! cc jump 2f;       /* not equal, break out */
+	CC = R0;               /* at end of s1? */
+	if cc jump 1b (bp);    /* no, keep going */
+	jump.s 3f;             /* strings are equal */
+2:
+	R0 = R0 - R1;          /* *s1 - *s2 */
+3:
+	RTS;
+
+ENDPROC(_strcmp)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/strcpy.S b/src/kernel/linux/v4.14/arch/blackfin/lib/strcpy.S
new file mode 100644
index 0000000..9495aa7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/strcpy.S
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+/* void *strcpy(char *dest, const char *src);
+ * R0 = address (dest)
+ * R1 = address (src)
+ *
+ * Returns a pointer to the destination string dest
+ */
+
+#ifdef CONFIG_STRCPY_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_strcpy)
+	P0 = R0 ;       /* dst*/
+	P1 = R1 ;       /* src*/
+
+1:
+	R1 = B [P1++] (Z);
+	B [P0++] = R1;
+	CC = R1;
+	if cc jump 1b (bp);
+	RTS;
+
+ENDPROC(_strcpy)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/strncmp.S b/src/kernel/linux/v4.14/arch/blackfin/lib/strncmp.S
new file mode 100644
index 0000000..3bfaedc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/strncmp.S
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+/* void *strncpy(char *s1, const char *s2, size_t n);
+ * R0 = address (dest)
+ * R1 = address (src)
+ * R2 = size (n)
+ * Returns a pointer to the destination string dest
+ */
+
+#ifdef CONFIG_STRNCMP_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_strncmp)
+	CC = R2 == 0;
+	if CC JUMP 5f;
+
+	P0 = R0 ;       /* s1 */
+	P1 = R1 ;       /* s2 */
+1:
+	R0 = B[P0++] (Z);      /* get *s1 */
+	R1 = B[P1++] (Z);      /* get *s2 */
+	CC = R0 == R1;         /* compare a byte */
+	if ! cc jump 3f;       /* not equal, break out */
+	CC = R0;               /* at end of s1? */
+	if ! cc jump 4f;       /* yes, all done */
+	R2 += -1;              /* no, adjust count */
+	CC = R2 == 0;
+	if ! cc jump 1b (bp);  /* more to do, keep going */
+2:
+	R0 = 0;                /* strings are equal */
+	jump.s 4f;
+3:
+	R0 = R0 - R1;          /* *s1 - *s2 */
+4:
+	RTS;
+
+5:
+	R0 = 0;
+	RTS;
+
+ENDPROC(_strncmp)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/strncpy.S b/src/kernel/linux/v4.14/arch/blackfin/lib/strncpy.S
new file mode 100644
index 0000000..92fd182
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/strncpy.S
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+#include <asm/context.S>
+
+/* void *strncpy(char *dest, const char *src, size_t n);
+ * R0 = address (dest)
+ * R1 = address (src)
+ * R2 = size
+ * Returns a pointer (R0) to the destination string dest
+ *  we do this by not changing R0
+ */
+
+#ifdef CONFIG_STRNCPY_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_strncpy)
+	CC = R2 == 0;
+	if CC JUMP 6f;
+
+	P2 = R2 ;       /* size */
+	P0 = R0 ;       /* dst*/
+	P1 = R1 ;       /* src*/
+
+	LSETUP (1f, 2f) LC0 = P2;
+1:
+	R1 = B [P1++] (Z);
+	B [P0++] = R1;
+	CC = R1 == 0;
+2:
+	if CC jump 3f;
+
+	RTS;
+
+	/* if src is shorter than n, we need to null pad bytes in dest
+	 * but, we can get here when the last byte is zero, and we don't
+	 * want to copy an extra byte at the end, so we need to check
+	 */
+3:
+	R2 = LC0;
+	CC = R2
+	if ! CC jump 6f;
+
+	/* if the required null padded portion is small, do it here, rather than
+	 * handling the overhead of memset (which is OK when things are big).
+	 */
+	R3 = 0x20;
+	CC = R2 < R3;
+	IF CC jump 4f;
+
+	R2 += -1;
+
+	/* Set things up for memset
+	 * R0 = address
+	 * R1 = filler byte (this case it's zero, set above)
+	 * R2 = count (set above)
+	 */
+
+	I1 = R0;
+	R0 = RETS;
+	I0 = R0;
+	R0 = P0;
+	pseudo_long_call _memset, p0;
+	R0 = I0;
+	RETS = R0;
+	R0 = I1;
+	RTS;
+
+4:
+	LSETUP(5f, 5f) LC0;
+5:
+	B [P0++] = R1;
+6:
+	RTS;
+
+ENDPROC(_strncpy)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/udivsi3.S b/src/kernel/linux/v4.14/arch/blackfin/lib/udivsi3.S
new file mode 100644
index 0000000..90bfa80
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/udivsi3.S
@@ -0,0 +1,277 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+#define CARRY AC0
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+
+ENTRY(___udivsi3)
+
+  CC = R0 < R1 (IU);    /* If X < Y, always return 0 */
+  IF CC JUMP .Lreturn_ident;
+
+  R2 = R1 << 16;
+  CC = R2 <= R0 (IU);
+  IF CC JUMP .Lidents;
+
+  R2 = R0 >> 31;       /* if X is a 31-bit number */
+  R3 = R1 >> 15;       /* and Y is a 15-bit number */
+  R2 = R2 | R3;        /* then it's okay to use the DIVQ builtins (fallthrough to fast)*/
+  CC = R2;
+  IF CC JUMP .Ly_16bit;
+
+/* METHOD 1: FAST DIVQ
+   We know we have a 31-bit dividend, and 15-bit divisor so we can use the
+   simple divq approach (first setting AQ to 0 - implying unsigned division,
+   then 16 DIVQ's).
+*/
+
+  AQ = CC;             /* Clear AQ (CC==0) */
+
+/* ISR States: When dividing two integers (32.0/16.0) using divide primitives,
+   we need to shift the dividend one bit to the left.
+   We have already checked that we have a 31-bit number so we are safe to do
+   that.
+*/
+  R0 <<= 1;
+  DIVQ(R0, R1); // 1
+  DIVQ(R0, R1); // 2
+  DIVQ(R0, R1); // 3
+  DIVQ(R0, R1); // 4
+  DIVQ(R0, R1); // 5
+  DIVQ(R0, R1); // 6
+  DIVQ(R0, R1); // 7
+  DIVQ(R0, R1); // 8
+  DIVQ(R0, R1); // 9
+  DIVQ(R0, R1); // 10
+  DIVQ(R0, R1); // 11
+  DIVQ(R0, R1); // 12
+  DIVQ(R0, R1); // 13
+  DIVQ(R0, R1); // 14
+  DIVQ(R0, R1); // 15
+  DIVQ(R0, R1); // 16
+  R0 = R0.L (Z);
+  RTS;
+
+.Ly_16bit:
+  /* We know that the upper 17 bits of Y might have bits set,
+  ** or that the sign bit of X might have a bit. If Y is a
+  ** 16-bit number, but not bigger, then we can use the builtins
+  ** with a post-divide correction.
+  ** R3 currently holds Y>>15, which means R3's LSB is the
+  ** bit we're interested in.
+  */
+
+  /* According to the ISR, to use the Divide primitives for
+  ** unsigned integer divide, the useable range is 31 bits
+  */
+  CC = ! BITTST(R0, 31);
+
+  /* IF condition is true we can scale our inputs and use the divide primitives,
+  ** with some post-adjustment
+  */
+  R3 += -1;		/* if so, Y is 0x00008nnn */
+  CC &= AZ;
+
+  /* If condition is true we can scale our inputs and use the divide primitives,
+  ** with some post-adjustment
+  */
+  R3 = R1 >> 1;		/* Pre-scaled divisor for primitive case */
+  R2 = R0 >> 16;
+
+  R2 = R3 - R2;		/* shifted divisor < upper 16 bits of dividend */
+  CC &= CARRY;
+  IF CC JUMP .Lshift_and_correct;
+
+  /* Fall through to the identities */
+
+/* METHOD 2: identities and manual calculation
+   We are not able to use the divide primites, but may still catch some special
+   cases.
+*/
+.Lidents:
+  /* Test for common identities. Value to be returned is placed in R2. */
+  CC = R0 == 0;        /* 0/Y => 0 */
+  IF CC JUMP .Lreturn_r0;
+  CC = R0 == R1;       /* X==Y => 1 */
+  IF CC JUMP .Lreturn_ident;
+  CC = R1 == 1;        /* X/1 => X */
+  IF CC JUMP .Lreturn_ident;
+
+  R2.L = ONES R1;
+  R2 = R2.L (Z);
+  CC = R2 == 1;
+  IF CC JUMP .Lpower_of_two;
+
+  [--SP] = (R7:5);                /* Push registers R5-R7 */
+
+  /* Idents don't match. Go for the full operation. */
+
+
+  R6 = 2;                         /* assume we'll shift two */
+  R3 = 1;
+
+  P2 = R1;
+                                  /* If either R0 or R1 have sign set, */
+                                  /* divide them by two, and note it's */
+                                  /* been done. */
+  CC = R1 < 0;
+  R2 = R1 >> 1;
+  IF CC R1 = R2;                  /* Possibly-shifted R1 */
+  IF !CC R6 = R3;                 /* R1 doesn't, so at most 1 shifted */
+
+  P0 = 0;
+  R3 = -R1;
+  [--SP] = R3;
+  R2 = R0 >> 1;
+  R2 = R0 >> 1;
+  CC = R0 < 0;
+  IF CC P0 = R6;                  /* Number of values divided */
+  IF !CC R2 = R0;                 /* Shifted R0 */
+
+                                  /* P0 is 0, 1 (NR/=2) or 2 (NR/=2, DR/=2) */
+
+                                  /* r2 holds Copy dividend  */
+  R3 = 0;                         /* Clear partial remainder */
+  R7 = 0;                         /* Initialise quotient bit */
+
+  P1 = 32;                        /* Set loop counter */
+  LSETUP(.Lulst, .Lulend) LC0 = P1; /* Set loop counter */
+.Lulst:  R6 = R2 >> 31;             /* R6 = sign bit of R2, for carry */
+       R2 = R2 << 1;              /* Shift 64 bit dividend up by 1 bit */
+       R3 = R3 << 1 || R5 = [SP];
+       R3 = R3 | R6;              /* Include any carry */
+       CC = R7 < 0;               /* Check quotient(AQ) */
+                                  /* If AQ==0, we'll sub divisor */
+       IF CC R5 = R1;             /* and if AQ==1, we'll add it. */
+       R3 = R3 + R5;              /* Add/sub divisor to partial remainder */
+       R7 = R3 ^ R1;              /* Generate next quotient bit */
+
+       R5 = R7 >> 31;             /* Get AQ */
+       BITTGL(R5, 0);             /* Invert it, to get what we'll shift */
+.Lulend: R2 = R2 + R5;              /* and "shift" it in. */
+
+  CC = P0 == 0;                   /* Check how many inputs we shifted */
+  IF CC JUMP .Lno_mult;            /* if none... */
+  R6 = R2 << 1;
+  CC = P0 == 1;
+  IF CC R2 = R6;                  /* if 1, Q = Q*2 */
+  IF !CC R1 = P2;                 /* if 2, restore stored divisor */
+
+  R3 = R2;                        /* Copy of R2 */
+  R3 *= R1;                       /* Q * divisor */
+  R5 = R0 - R3;                   /* Z = (dividend - Q * divisor) */
+  CC = R1 <= R5 (IU);             /* Check if divisor <= Z? */
+  R6 = CC;                        /* if yes, R6 = 1 */
+  R2 = R2 + R6;                   /* if yes, add one to quotient(Q) */
+.Lno_mult:
+  SP += 4;
+  (R7:5) = [SP++];                /* Pop registers R5-R7 */
+  R0 = R2;                        /* Store quotient */
+  RTS;
+
+.Lreturn_ident:
+  CC = R0 < R1 (IU);    /* If X < Y, always return 0 */
+  R2 = 0;
+  IF CC JUMP .Ltrue_return_ident;
+  R2 = -1 (X);         /* X/0 => 0xFFFFFFFF */
+  CC = R1 == 0;
+  IF CC JUMP .Ltrue_return_ident;
+  R2 = -R2;            /* R2 now 1 */
+  CC = R0 == R1;       /* X==Y => 1 */
+  IF CC JUMP .Ltrue_return_ident;
+  R2 = R0;             /* X/1 => X */
+  /*FALLTHRU*/
+
+.Ltrue_return_ident:
+  R0 = R2;
+.Lreturn_r0:
+  RTS;
+
+.Lpower_of_two:
+  /* Y has a single bit set, which means it's a power of two.
+  ** That means we can perform the division just by shifting
+  ** X to the right the appropriate number of bits
+  */
+
+  /* signbits returns the number of sign bits, minus one.
+  ** 1=>30, 2=>29, ..., 0x40000000=>0. Which means we need
+  ** to shift right n-signbits spaces. It also means 0x80000000
+  ** is a special case, because that *also* gives a signbits of 0
+  */
+
+  R2 = R0 >> 31;
+  CC = R1 < 0;
+  IF CC JUMP .Ltrue_return_ident;
+
+  R1.l = SIGNBITS R1;
+  R1 = R1.L (Z);
+  R1 += -30;
+  R0 = LSHIFT R0 by R1.L;
+  RTS;
+
+/* METHOD 3: PRESCALE AND USE THE DIVIDE PRIMITIVES WITH SOME POST-CORRECTION
+  Two scaling operations are required to use the divide primitives with a
+  divisor > 0x7FFFF.
+  Firstly (as in method 1) we need to shift the dividend 1 to the left for
+  integer division.
+  Secondly we need to shift both the divisor and dividend 1 to the right so
+  both are in range for the primitives.
+  The left/right shift of the dividend does nothing so we can skip it.
+*/
+.Lshift_and_correct:
+  R2 = R0;
+  // R3 is already R1 >> 1
+  CC=!CC;
+  AQ = CC;                        /* Clear AQ, got here with CC = 0 */
+  DIVQ(R2, R3); // 1
+  DIVQ(R2, R3); // 2
+  DIVQ(R2, R3); // 3
+  DIVQ(R2, R3); // 4
+  DIVQ(R2, R3); // 5
+  DIVQ(R2, R3); // 6
+  DIVQ(R2, R3); // 7
+  DIVQ(R2, R3); // 8
+  DIVQ(R2, R3); // 9
+  DIVQ(R2, R3); // 10
+  DIVQ(R2, R3); // 11
+  DIVQ(R2, R3); // 12
+  DIVQ(R2, R3); // 13
+  DIVQ(R2, R3); // 14
+  DIVQ(R2, R3); // 15
+  DIVQ(R2, R3); // 16
+
+  /* According to the Instruction Set Reference:
+     To divide by a divisor > 0x7FFF,
+     1. prescale and perform divide to obtain quotient (Q) (done above),
+     2. multiply quotient by unscaled divisor (result M)
+     3. subtract the product from the divident to get an error (E = X - M)
+     4. if E < divisor (Y) subtract 1, if E > divisor (Y) add 1, else return quotient (Q)
+   */
+  R3 = R2.L (Z);		/* Q = X' / Y' */
+  R2 = R3;		/* Preserve Q */
+  R2 *= R1;		/* M = Q * Y */
+  R2 = R0 - R2;		/* E = X - M */
+  R0 = R3;		/* Copy Q into result reg */
+
+/* Correction: If result of the multiply is negative, we overflowed
+   and need to correct the result by subtracting 1 from the result.*/
+  R3 = 0xFFFF (Z);
+  R2 = R2 >> 16;		/* E >> 16 */
+  CC = R2 == R3;
+  R3 = 1 ;
+  R1 = R0 - R3;
+  IF CC R0 = R1;
+  RTS;
+
+ENDPROC(___udivsi3)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/umodsi3.S b/src/kernel/linux/v4.14/arch/blackfin/lib/umodsi3.S
new file mode 100644
index 0000000..3794c00
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/umodsi3.S
@@ -0,0 +1,49 @@
+/*
+ * libgcc1 routines for Blackfin 5xx
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.extern ___udivsi3;
+.type ___udivsi3, STT_FUNC;
+.globl	___umodsi3
+.type ___umodsi3, STT_FUNC;
+___umodsi3:
+
+	CC=R0==0;
+	IF CC JUMP .LRETURN_R0;		/* Return 0, if NR == 0 */
+	CC= R1==0;
+	IF CC JUMP .LRETURN_ZERO_VAL;	/* Return 0, if DR == 0 */
+	CC=R0==R1;
+	IF CC JUMP .LRETURN_ZERO_VAL;	/* Return 0, if NR == DR */
+	CC = R1 == 1;
+	IF CC JUMP .LRETURN_ZERO_VAL;	/* Return 0, if  DR == 1 */
+	CC = R0<R1 (IU);
+	IF CC JUMP .LRETURN_R0;		/* Return dividend (R0),IF NR<DR */
+
+	[--SP] = (R7:6);		/* Push registers and */
+	[--SP] = RETS;			/* Return address */
+	R7 = R0;			/* Copy of R0 */
+	R6 = R1;
+	SP += -12;			/* Should always provide this space */
+	CALL ___udivsi3;		/* Compute unsigned quotient using ___udiv32()*/
+	SP += 12;
+	R0 *= R6;			/* Quotient * divisor */
+	R0 = R7 - R0;			/* Dividend - (quotient * divisor) */
+	RETS = [SP++];			/* Pop return address */
+	( R7:6) = [SP++];		/* And registers */
+	RTS;				/* Return remainder */
+.LRETURN_ZERO_VAL:
+	R0 = 0;
+.LRETURN_R0:
+	RTS;
+
+.size ___umodsi3, .-___umodsi3
diff --git a/src/kernel/linux/v4.14/arch/blackfin/lib/umulsi3_highpart.S b/src/kernel/linux/v4.14/arch/blackfin/lib/umulsi3_highpart.S
new file mode 100644
index 0000000..0dcace9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/lib/umulsi3_highpart.S
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2007 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+.align 2
+.global ___umulsi3_highpart;
+.type ___umulsi3_highpart, STT_FUNC;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+___umulsi3_highpart:
+	R2 = R1.H * R0.H, R3 = R1.L * R0.H (FU);
+	R0 = R1.L * R0.L, R1 = R1.H * R0.L (FU);
+	R0 >>= 16;
+	/* Unsigned multiplication has the nice property that we can
+	   ignore carry on this first addition.  */
+	R0 = R0 + R3;
+	R0 = R0 + R1;
+	cc = ac0;
+	R1 = cc;
+	R1 = PACK(R1.l,R0.h);
+	R0 = R1 + R2;
+	RTS;
+
+.size ___umulsi3_highpart, .-___umulsi3_highpart
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/Kconfig
new file mode 100644
index 0000000..4731f6b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/Kconfig
@@ -0,0 +1,320 @@
+# SPDX-License-Identifier: GPL-2.0
+config BF51x
+	def_bool y
+	depends on (BF512 || BF514 || BF516 || BF518)
+
+if (BF51x)
+
+source "arch/blackfin/mach-bf518/boards/Kconfig"
+
+menu "BF518 Specific Configuration"
+
+comment "Alternative Multiplexing Scheme"
+
+choice
+	prompt "PWM Channel Pins"
+	default BF518_PWM_ALL_PORTF
+	help
+	  Select pins used for the PWM channels:
+	    PWM_AH PWM_AL PWM_BH PWM_BL PWM_CH PWM_CL
+
+	  See the Hardware Reference Manual for more details.
+
+config BF518_PWM_ALL_PORTF
+	bool "PF1 - PF6"
+	help
+	  PF{1,2,3,4,5,6} <-> PWM_{AH,AL,BH,BL,CH,CL}
+
+config BF518_PWM_PORTF_PORTG
+	bool "PF11 - PF14 / PG1 - PG2"
+	help
+	  PF{11,12,13,14} <-> PWM_{AH,AL,BH,BL}
+	  PG{1,2} <-> PWM_{CH,CL}
+
+endchoice
+
+choice
+	prompt "PWM Sync Pin"
+	default BF518_PWM_SYNC_PF7
+	help
+	  Select the pin used for PWM_SYNC.
+
+	  See the Hardware Reference Manual for more details.
+
+config BF518_PWM_SYNC_PF7
+	bool "PF7"
+config BF518_PWM_SYNC_PF15
+	bool "PF15"
+endchoice
+
+choice
+	prompt "PWM Trip B Pin"
+	default BF518_PWM_TRIPB_PG10
+	help
+	  Select the pin used for PWM_TRIPB.
+
+	  See the Hardware Reference Manual for more details.
+
+config BF518_PWM_TRIPB_PG10
+	bool "PG10"
+config BF518_PWM_TRIPB_PG14
+	bool "PG14"
+endchoice
+
+choice
+	prompt "PPI / Timer Pins"
+	default BF518_PPI_TMR_PG5
+	help
+	  Select pins used for PPI/Timer:
+	    PPICLK PPIFS1 PPIFS2
+	    TMRCLK TMR0 TMR1
+
+	  See the Hardware Reference Manual for more details.
+
+config BF518_PPI_TMR_PG5
+	bool "PG5 - PG7"
+	help
+	  PG{5,6,7} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2}
+
+config BF518_PPI_TMR_PG12
+	bool "PG12 - PG14"
+	help
+	  PG{12,13,14} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2}
+
+endchoice
+
+comment "Hysteresis/Schmitt Trigger Control"
+config BFIN_HYSTERESIS_CONTROL
+	bool "Enable Hysteresis Control"
+	help
+	  The ADSP-BF51x allows to control input hysteresis for Port F,
+	  Port G and Port H and other processor signal inputs.
+	  The Schmitt trigger enables can be set only for pin groups.
+	  Saying Y will overwrite the default reset or boot loader
+	  initialization.
+
+menu "PORT F"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTF_0_7
+	bool "Enable Hysteresis on PORTF {0...7}"
+config GPIO_HYST_PORTF_8_9
+	bool "Enable Hysteresis on PORTF {8, 9}"
+config GPIO_HYST_PORTF_10
+	bool "Enable Hysteresis on PORTF 10"
+config GPIO_HYST_PORTF_11
+	bool "Enable Hysteresis on PORTF 11"
+config GPIO_HYST_PORTF_12_13
+	bool "Enable Hysteresis on PORTF {12, 13}"
+config GPIO_HYST_PORTF_14_15
+	bool "Enable Hysteresis on PORTF {14, 15}"
+endmenu
+
+menu "PORT G"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTG_0
+	bool "Enable Hysteresis on PORTG 0"
+config GPIO_HYST_PORTG_1_4
+	bool "Enable Hysteresis on PORTG {1...4}"
+config GPIO_HYST_PORTG_5_6
+	bool "Enable Hysteresis on PORTG {5, 6}"
+config GPIO_HYST_PORTG_7_8
+	bool "Enable Hysteresis on PORTG {7, 8}"
+config GPIO_HYST_PORTG_9
+	bool "Enable Hysteresis on PORTG 9"
+config GPIO_HYST_PORTG_10
+	bool "Enable Hysteresis on PORTG 10"
+config GPIO_HYST_PORTG_11_13
+	bool "Enable Hysteresis on PORTG {11...13}"
+config GPIO_HYST_PORTG_14_15
+	bool "Enable Hysteresis on PORTG {14, 15}"
+endmenu
+
+menu "PORT H"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTH_0_7
+	bool "Enable Hysteresis on PORTH {0...7}"
+
+endmenu
+
+menu "None-GPIO"
+	depends on BFIN_HYSTERESIS_CONTROL
+config NONEGPIO_HYST_NMI_RST_BMODE
+	bool "Enable Hysteresis on {NMI, RESET, BMODE}"
+config NONEGPIO_HYST_JTAG
+	bool "Enable Hysteresis on JTAG"
+endmenu
+
+comment "Interrupt Priority Assignment"
+menu "Priority"
+
+config IRQ_PLL_WAKEUP
+	int "IRQ_PLL_WAKEUP"
+	default 7
+config IRQ_DMA0_ERROR
+	int "IRQ_DMA0_ERROR"
+	default 7
+config IRQ_DMAR0_BLK
+	int "IRQ_DMAR0_BLK"
+	default 7
+config IRQ_DMAR1_BLK
+	int "IRQ_DMAR1_BLK"
+	default 7
+config IRQ_DMAR0_OVR
+	int "IRQ_DMAR0_OVR"
+	default 7
+config IRQ_DMAR1_OVR
+	int "IRQ_DMAR1_OVR"
+	default 7
+config IRQ_PPI_ERROR
+	int "IRQ_PPI_ERROR"
+	default 7
+config IRQ_MAC_ERROR
+	int "IRQ_MAC_ERROR"
+	default 7
+config IRQ_SPORT0_ERROR
+	int "IRQ_SPORT0_ERROR"
+	default 7
+config IRQ_SPORT1_ERROR
+	int "IRQ_SPORT1_ERROR"
+	default 7
+config IRQ_PTP_ERROR
+	int "IRQ_PTP_ERROR"
+	default 7
+config IRQ_UART0_ERROR
+	int "IRQ_UART0_ERROR"
+	default 7
+config IRQ_UART1_ERROR
+	int "IRQ_UART1_ERROR"
+	default 7
+config IRQ_RTC
+	int "IRQ_RTC"
+	default 8
+config IRQ_PPI
+	int "IRQ_PPI"
+	default 8
+config IRQ_SPORT0_RX
+	int "IRQ_SPORT0_RX"
+	default 9
+config IRQ_SPORT0_TX
+	int "IRQ_SPORT0_TX"
+	default 9
+config IRQ_SPORT1_RX
+	int "IRQ_SPORT1_RX"
+	default 9
+config IRQ_SPORT1_TX
+	int "IRQ_SPORT1_TX"
+	default 9
+config IRQ_TWI
+	int "IRQ_TWI"
+	default 10
+config IRQ_SPI0
+	int "IRQ_SPI"
+	default 10
+config IRQ_UART0_RX
+	int "IRQ_UART0_RX"
+	default 10
+config IRQ_UART0_TX
+	int "IRQ_UART0_TX"
+	default 10
+config IRQ_UART1_RX
+	int "IRQ_UART1_RX"
+	default 10
+config IRQ_UART1_TX
+	int "IRQ_UART1_TX"
+	default 10
+config IRQ_OPTSEC
+	int "IRQ_OPTSEC"
+	default 11
+config IRQ_CNT
+	int "IRQ_CNT"
+	default 11
+config IRQ_MAC_RX
+	int "IRQ_MAC_RX"
+	default 11
+config IRQ_PORTH_INTA
+	int "IRQ_PORTH_INTA"
+	default 11
+config IRQ_MAC_TX
+	int "IRQ_MAC_TX/NFC"
+	default 11
+config IRQ_PORTH_INTB
+	int "IRQ_PORTH_INTB"
+	default 11
+config IRQ_TIMER0
+	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
+	default 8
+config IRQ_TIMER1
+	int "IRQ_TIMER1"
+	default 12
+config IRQ_TIMER2
+	int "IRQ_TIMER2"
+	default 12
+config IRQ_TIMER3
+	int "IRQ_TIMER3"
+	default 12
+config IRQ_TIMER4
+	int "IRQ_TIMER4"
+	default 12
+config IRQ_TIMER5
+	int "IRQ_TIMER5"
+	default 12
+config IRQ_TIMER6
+	int "IRQ_TIMER6"
+	default 12
+config IRQ_TIMER7
+	int "IRQ_TIMER7"
+	default 12
+config IRQ_PORTG_INTA
+	int "IRQ_PORTG_INTA"
+	default 12
+config IRQ_PORTG_INTB
+	int "IRQ_PORTG_INTB"
+	default 12
+config IRQ_MEM_DMA0
+	int "IRQ_MEM_DMA0"
+	default 13
+config IRQ_MEM_DMA1
+	int "IRQ_MEM_DMA1"
+	default 13
+config IRQ_WATCH
+	int "IRQ_WATCH"
+	default 13
+config IRQ_PORTF_INTA
+	int "IRQ_PORTF_INTA"
+	default 13
+config IRQ_PORTF_INTB
+	int "IRQ_PORTF_INTB"
+	default 13
+config IRQ_SPI0_ERROR
+	int "IRQ_SPI0_ERROR"
+	default 7
+config IRQ_SPI1_ERROR
+	int "IRQ_SPI1_ERROR"
+	default 7
+config IRQ_RSI_INT0
+	int "IRQ_RSI_INT0"
+	default 7
+config IRQ_RSI_INT1
+	int "IRQ_RSI_INT1"
+	default 7
+config IRQ_PWM_TRIP
+	int "IRQ_PWM_TRIP"
+	default 10
+config IRQ_PWM_SYNC
+	int "IRQ_PWM_SYNC"
+	default 10
+config IRQ_PTP_STAT
+	int "IRQ_PTP_STAT"
+	default 10
+
+	help
+	  Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
+	  This applies to all the above.  It is not recommended to assign the
+	  highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/Makefile
new file mode 100644
index 0000000..168a193
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/Makefile
@@ -0,0 +1,5 @@
+#
+# arch/blackfin/mach-bf518/Makefile
+#
+
+obj-y := ints-priority.o dma.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/boards/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/boards/Kconfig
new file mode 100644
index 0000000..f7b93b9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/boards/Kconfig
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+choice
+	prompt "System type"
+	default BFIN518F_EZBRD
+	help
+	  Select your board!
+
+config BFIN518F_EZBRD
+	bool "BF518F-EZBRD"
+	help
+	  BF518-EZBRD board support.
+
+config BFIN518F_TCM
+       bool "Bluetechnix TCM-BF518"
+       help
+         Bluetechnix TCM-BF518 board support.
+
+endchoice
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/boards/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/boards/Makefile
new file mode 100644
index 0000000..a9ef25c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/boards/Makefile
@@ -0,0 +1,6 @@
+#
+# arch/blackfin/mach-bf518/boards/Makefile
+#
+
+obj-$(CONFIG_BFIN518F_EZBRD)            += ezbrd.o
+obj-$(CONFIG_BFIN518F_TCM)		+= tcm-bf518.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/boards/ezbrd.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/boards/ezbrd.c
new file mode 100644
index 0000000..d022112
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -0,0 +1,841 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <asm/bfin_sdh.h>
+#include <linux/spi/ad7877.h>
+#include <net/dsa.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "ADI BF518F-EZBRD";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+static struct mtd_partition ezbrd_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x1C0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ezbrd_flash_data = {
+	.width      = 2,
+	.parts      = ezbrd_partitions,
+	.nr_parts   = ARRAY_SIZE(ezbrd_partitions),
+};
+
+static struct resource ezbrd_flash_resource = {
+	.start = 0x20000000,
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	.end   = 0x202fffff,
+#else
+	.end   = 0x203fffff,
+#endif
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezbrd_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezbrd_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezbrd_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = {
+	P_MII0_ETxD0,
+	P_MII0_ETxD1,
+	P_MII0_ETxEN,
+	P_MII0_ERxD0,
+	P_MII0_ERxD1,
+	P_MII0_TxCLK,
+	P_MII0_PHYINT,
+	P_MII0_CRS,
+	P_MII0_MDC,
+	P_MII0_MDIO,
+	0
+};
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
+		.addr = 3,
+#else
+		.addr = 1,
+#endif
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_MII,
+	.mac_peripherals = bfin_mac_peripherals,
+#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
+	.phy_mask = 0xfff7, /* Only probe the port phy connect to the on chip MAC */
+#endif
+	.vlan1_mask = 1,
+	.vlan2_mask = 2,
+};
+
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
+};
+
+#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
+static struct dsa_chip_data ksz8893m_switch_chip_data = {
+	.mii_bus = &bfin_mii_bus.dev,
+	.port_names = {
+		NULL,
+		"eth%d",
+		"eth%d",
+		"cpu",
+	},
+};
+static struct dsa_platform_data ksz8893m_switch_data = {
+	.nr_chips = 1,
+	.netdev = &bfin_mac_device.dev,
+	.chip = &ksz8893m_switch_chip_data,
+};
+
+static struct platform_device ksz8893m_switch_device = {
+	.name		= "dsa",
+	.id		= 0,
+	.num_resources	= 0,
+	.dev.platform_data = &ksz8893m_switch_data,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity 	= 1,
+	.first_conversion_delay = 3,
+	.acquisition_time 	= 1,
+	.averaging 		= 1,
+	.pen_down_acc_interval 	= 1,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 2, /* On BF518F-EZBRD it's SPI0_SSEL2 */
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
+	{
+		.modalias = "ksz8893m",
+		.max_speed_hz = 5000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = NULL,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PF8,
+		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select  = 2,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+	{
+		.modalias	= "wm8731",
+		.max_speed_hz	= 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select    = 5,
+		.mode = SPI_MODE_0,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+	},
+#endif
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+	{
+		.modalias = "bfin-lq035q1-spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+};
+
+/* SPI controller data */
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* SPI (0) */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 6,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI0,
+		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+
+/* SPI (1) */
+static struct bfin5xx_spi_master bfin_spi1_info = {
+	.num_chipselect = 6,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
+};
+
+static struct resource bfin_spi1_resource[] = {
+	[0] = {
+		.start = SPI1_REGBASE,
+		.end   = SPI1_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI1,
+		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi1_device = {
+	.name = "bfin-spi",
+	.id = 1, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi1_resource),
+	.resource = bfin_spi1_resource,
+	.dev = {
+		.platform_data = &bfin_spi1_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+	},
+#endif
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.irq = IRQ_PF8,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
+	{
+		I2C_BOARD_INFO("ssm2602", 0x1b),
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SDH_BFIN)
+
+static struct bfin_sd_host bfin_sdh_data = {
+	.dma_chan = CH_RSI,
+	.irq_int0 = IRQ_RSI_INT0,
+	.pin_req = {P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0},
+};
+
+static struct platform_device bf51x_sdh_device = {
+	.name = "bfin-sdh",
+	.id = 0,
+	.dev = {
+		.platform_data = &bfin_sdh_data,
+	},
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
+	&ksz8893m_switch_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+	&bfin_spi1_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+	&bfin_i2s,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+	&bfin_device_gpiokeys,
+#endif
+
+#if IS_ENABLED(CONFIG_SDH_BFIN)
+	&bf51x_sdh_device,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+	&ezbrd_flash_device,
+#endif
+};
+
+static int __init ezbrd_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	/* setup BF518-EZBRD GPIO pin PG11 to AMS2, PG15 to AMS3. */
+	peripheral_request(P_AMS2, "ParaFlash");
+#if !IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	peripheral_request(P_AMS3, "ParaFlash");
+#endif
+	return 0;
+}
+
+arch_initcall(ezbrd_init);
+
+static struct platform_device *ezbrd_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezbrd_early_devices,
+		ARRAY_SIZE(ezbrd_early_devices));
+}
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
+}
+
+int bfin_get_ether_addr(char *addr)
+{
+	/* the MAC is stored in OTP memory page 0xDF */
+	u32 ret;
+	u64 otp_mac;
+	u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
+
+	ret = otp_read(0xDF, 0x00, &otp_mac);
+	if (!(ret & 0x1)) {
+		char *otp_mac_p = (char *)&otp_mac;
+		for (ret = 0; ret < 6; ++ret)
+			addr[ret] = otp_mac_p[5 - ret];
+	}
+	return 0;
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/boards/tcm-bf518.c
new file mode 100644
index 0000000..240d5cb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/boards/tcm-bf518.c
@@ -0,0 +1,740 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <asm/bfin_sdh.h>
+#include <linux/spi/ad7877.h>
+#include <net/dsa.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix TCM-BF518";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+static struct mtd_partition tcm_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	},
+	{
+		.name       = "linux(nor)",
+		.size       = 0x1C0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data tcm_flash_data = {
+	.width      = 2,
+	.parts      = tcm_partitions,
+	.nr_parts   = ARRAY_SIZE(tcm_partitions),
+};
+
+static struct resource tcm_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x201fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device tcm_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &tcm_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &tcm_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_MII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity	= 1,
+	.first_conversion_delay	= 3,
+	.acquisition_time	= 1,
+	.averaging		= 1,
+	.pen_down_acc_interval	= 1,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 2, /* SPI0_SSEL2 */
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PF8,
+		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select  = 2,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+	{
+		.modalias	= "wm8731",
+		.max_speed_hz	= 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select    = 5,
+		.mode = SPI_MODE_0,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+	},
+#endif
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+	{
+		.modalias = "bfin-lq035q1-spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+};
+
+/* SPI controller data */
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* SPI (0) */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 6,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI0,
+		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+
+/* SPI (1) */
+static struct bfin5xx_spi_master bfin_spi1_info = {
+	.num_chipselect = 6,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
+};
+
+static struct resource bfin_spi1_resource[] = {
+	[0] = {
+		.start = SPI1_REGBASE,
+		.end   = SPI1_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI1,
+		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi1_device = {
+	.name = "bfin-spi",
+	.id = 1, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi1_resource),
+	.resource = bfin_spi1_resource,
+	.dev = {
+		.platform_data = &bfin_spi1_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+	},
+#endif
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.irq = IRQ_PF8,
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SDH_BFIN)
+
+static struct bfin_sd_host bfin_sdh_data = {
+	.dma_chan = CH_RSI,
+	.irq_int0 = IRQ_RSI_INT0,
+	.pin_req = {P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0},
+};
+
+static struct platform_device bf51x_sdh_device = {
+	.name = "bfin-sdh",
+	.id = 0,
+	.dev = {
+		.platform_data = &bfin_sdh_data,
+	},
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *tcm_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+	&bfin_spi1_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+	&bfin_device_gpiokeys,
+#endif
+
+#if IS_ENABLED(CONFIG_SDH_BFIN)
+	&bf51x_sdh_device,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+	&tcm_flash_device,
+#endif
+};
+
+static int __init tcm_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+	platform_add_devices(tcm_devices, ARRAY_SIZE(tcm_devices));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(tcm_init);
+
+static struct platform_device *tcm_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(tcm_early_devices,
+		ARRAY_SIZE(tcm_early_devices));
+}
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
+}
+
+int bfin_get_ether_addr(char *addr)
+{
+	return 1;
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/dma.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/dma.c
new file mode 100644
index 0000000..bcd1fbc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/dma.c
@@ -0,0 +1,98 @@
+/*
+ * the simple DMA Implementation for Blackfin
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS] = {
+	(struct dma_register *) DMA0_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_NEXT_DESC_PTR,
+	(struct dma_register *) DMA3_NEXT_DESC_PTR,
+	(struct dma_register *) DMA4_NEXT_DESC_PTR,
+	(struct dma_register *) DMA5_NEXT_DESC_PTR,
+	(struct dma_register *) DMA6_NEXT_DESC_PTR,
+	(struct dma_register *) DMA7_NEXT_DESC_PTR,
+	(struct dma_register *) DMA8_NEXT_DESC_PTR,
+	(struct dma_register *) DMA9_NEXT_DESC_PTR,
+	(struct dma_register *) DMA10_NEXT_DESC_PTR,
+	(struct dma_register *) DMA11_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+};
+EXPORT_SYMBOL(dma_io_base_addr);
+
+int channel2irq(unsigned int channel)
+{
+	int ret_irq = -1;
+
+	switch (channel) {
+	case CH_PPI:
+		ret_irq = IRQ_PPI;
+		break;
+
+	case CH_EMAC_RX:
+		ret_irq = IRQ_MAC_RX;
+		break;
+
+	case CH_EMAC_TX:
+		ret_irq = IRQ_MAC_TX;
+		break;
+
+	case CH_UART1_RX:
+		ret_irq = IRQ_UART1_RX;
+		break;
+
+	case CH_UART1_TX:
+		ret_irq = IRQ_UART1_TX;
+		break;
+
+	case CH_SPORT0_RX:
+		ret_irq = IRQ_SPORT0_RX;
+		break;
+
+	case CH_SPORT0_TX:
+		ret_irq = IRQ_SPORT0_TX;
+		break;
+
+	case CH_SPORT1_RX:
+		ret_irq = IRQ_SPORT1_RX;
+		break;
+
+	case CH_SPORT1_TX:
+		ret_irq = IRQ_SPORT1_TX;
+		break;
+
+	case CH_SPI0:
+		ret_irq = IRQ_SPI0;
+		break;
+
+	case CH_UART0_RX:
+		ret_irq = IRQ_UART0_RX;
+		break;
+
+	case CH_UART0_TX:
+		ret_irq = IRQ_UART0_TX;
+		break;
+
+	case CH_MEM_STREAM0_SRC:
+	case CH_MEM_STREAM0_DEST:
+		ret_irq = IRQ_MEM_DMA0;
+		break;
+
+	case CH_MEM_STREAM1_SRC:
+	case CH_MEM_STREAM1_DEST:
+		ret_irq = IRQ_MEM_DMA1;
+		break;
+	}
+	return ret_irq;
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/anomaly.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/anomaly.h
new file mode 100644
index 0000000..46cb882
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -0,0 +1,170 @@
+/*
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
+ *
+ * Copyright 2004-2011 Analog Devices Inc.
+ * Licensed under the Clear BSD license.
+ */
+
+/* This file should be up to date with:
+ *  - Revision F, 05/23/2011; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
+ */
+
+#if __SILICON_REVISION__ < 0
+# error will not work on BF518 silicon version
+#endif
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (1)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (1)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
+#define ANOMALY_05000405 (1)
+/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
+#define ANOMALY_05000408 (1)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */
+#define ANOMALY_05000421 (1)
+/* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */
+#define ANOMALY_05000422 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* Software System Reset Corrupts PLL_LOCKCNT Register */
+#define ANOMALY_05000430 (__SILICON_REVISION__ < 1)
+/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+#define ANOMALY_05000431 (1)
+/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */
+#define ANOMALY_05000434 (1)
+/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
+#define ANOMALY_05000435 (__SILICON_REVISION__ < 1)
+/* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */
+#define ANOMALY_05000438 (__SILICON_REVISION__ < 1)
+/* Preboot Cannot be Used to Alter the PLL_DIV Register */
+#define ANOMALY_05000439 (__SILICON_REVISION__ < 1)
+/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
+#define ANOMALY_05000440 (__SILICON_REVISION__ < 1)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
+/* Incorrect L1 Instruction Bank B Memory Map Location */
+#define ANOMALY_05000444 (__SILICON_REVISION__ < 1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (__SILICON_REVISION__ < 1)
+/* PWM_TRIPB Signal Not Available on PG10 */
+#define ANOMALY_05000453 (__SILICON_REVISION__ < 1)
+/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
+#define ANOMALY_05000455 (__SILICON_REVISION__ < 1)
+/* False Hardware Error when RETI Points to Invalid Memory */
+#define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (__SILICON_REVISION__ < 2)
+/* Incorrect Default MSEL Value in PLL_CTL */
+#define ANOMALY_05000472 (__SILICON_REVISION__ < 2)
+/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */
+#define ANOMALY_05000473 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* PLL Latches Incorrect Settings During Reset */
+#define ANOMALY_05000482 (__SILICON_REVISION__ < 2)
+/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */
+#define ANOMALY_05000485 (__SILICON_REVISION__ < 2)
+/* SPI Master Boot Can Fail Under Certain Conditions */
+#define ANOMALY_05000490 (1)
+/* Instruction Memory Stalls Can Cause IFLUSH to Fail */
+#define ANOMALY_05000491 (1)
+/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */
+#define ANOMALY_05000494 (1)
+/* CNT_COMMAND Functionality Depends on CNT_IMASK Configuration */
+#define ANOMALY_05000498 (1)
+/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */
+#define ANOMALY_05000501 (1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
+#define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
+#define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000219 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
+#define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
+#define ANOMALY_05000242 (0)
+#define ANOMALY_05000244 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
+#define ANOMALY_05000257 (0)
+#define ANOMALY_05000261 (0)
+#define ANOMALY_05000263 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000273 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000278 (0)
+#define ANOMALY_05000281 (0)
+#define ANOMALY_05000283 (0)
+#define ANOMALY_05000285 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000301 (0)
+#define ANOMALY_05000305 (0)
+#define ANOMALY_05000307 (0)
+#define ANOMALY_05000311 (0)
+#define ANOMALY_05000312 (0)
+#define ANOMALY_05000315 (0)
+#define ANOMALY_05000323 (0)
+#define ANOMALY_05000353 (0)
+#define ANOMALY_05000357 (0)
+#define ANOMALY_05000362 (1)
+#define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
+#define ANOMALY_05000371 (0)
+#define ANOMALY_05000380 (0)
+#define ANOMALY_05000383 (0)
+#define ANOMALY_05000386 (0)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
+#define ANOMALY_05000402 (0)
+#define ANOMALY_05000412 (0)
+#define ANOMALY_05000432 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000475 (0)
+#define ANOMALY_05000480 (0)
+#define ANOMALY_16000030 (0)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/bf518.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/bf518.h
new file mode 100644
index 0000000..6906dee
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/bf518.h
@@ -0,0 +1,214 @@
+/*
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __MACH_BF518_H__
+#define __MACH_BF518_H__
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15		0x8000
+#define IMASK_IVG14		0x4000
+#define IMASK_IVG13		0x2000
+#define IMASK_IVG12		0x1000
+
+#define IMASK_IVG11		0x0800
+#define IMASK_IVG10		0x0400
+#define IMASK_IVG9		0x0200
+#define IMASK_IVG8		0x0100
+
+#define IMASK_IVG7		0x0080
+#define IMASK_IVGTMR		0x0040
+#define IMASK_IVGHW		0x0020
+
+/***************************/
+
+#define BFIN_DSUBBANKS	4
+#define BFIN_DWAYS		2
+#define BFIN_DLINES		64
+#define BFIN_ISUBBANKS	4
+#define BFIN_IWAYS		4
+#define BFIN_ILINES		32
+
+#define WAY0_L			0x1
+#define WAY1_L			0x2
+#define WAY01_L			0x3
+#define WAY2_L			0x4
+#define WAY02_L			0x5
+#define	WAY12_L			0x6
+#define	WAY012_L		0x7
+
+#define	WAY3_L			0x8
+#define	WAY03_L			0x9
+#define	WAY13_L			0xA
+#define	WAY013_L		0xB
+
+#define	WAY32_L			0xC
+#define	WAY320_L		0xD
+#define	WAY321_L		0xE
+#define	WAYALL_L		0xF
+
+#define DMC_ENABLE (2<<2)	/*yes, 2, not 1 */
+
+/********************************* EBIU Settings ************************************/
+#define AMBCTL0VAL	((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL	((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#ifdef CONFIG_C_AMBEN_ALL
+#define V_AMBEN AMBEN_ALL
+#endif
+#ifdef CONFIG_C_AMBEN
+#define V_AMBEN 0x0
+#endif
+#ifdef CONFIG_C_AMBEN_B0
+#define V_AMBEN AMBEN_B0
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1
+#define V_AMBEN AMBEN_B0_B1
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1_B2
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+#ifdef CONFIG_C_CDPRIO
+#define V_CDPRIO 0x100
+#else
+#define V_CDPRIO 0x0
+#endif
+
+#define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO)
+
+/**************************** Hysteresis Settings ****************************/
+
+#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL
+#ifdef CONFIG_GPIO_HYST_PORTF_0_7
+#define HYST_PORTF_0_7		(1 << 0)
+#else
+#define HYST_PORTF_0_7		(0 << 0)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_8_9
+#define HYST_PORTF_8_9		(1 << 2)
+#else
+#define HYST_PORTF_8_9		(0 << 2)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_10
+#define HYST_PORTF_10		(1 << 4)
+#else
+#define HYST_PORTF_10		(0 << 4)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_11
+#define HYST_PORTF_11		(1 << 6)
+#else
+#define HYST_PORTF_11		(0 << 6)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_12_13
+#define HYST_PORTF_12_13	(1 << 8)
+#else
+#define HYST_PORTF_12_13	(0 << 8)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_14_15
+#define HYST_PORTF_14_15	(1 << 10)
+#else
+#define HYST_PORTF_14_15	(0 << 10)
+#endif
+
+#define HYST_PORTF_0_15	(HYST_PORTF_0_7 | HYST_PORTF_8_9 | HYST_PORTF_10 | \
+		HYST_PORTF_11 | HYST_PORTF_12_13 | HYST_PORTF_14_15)
+
+#ifdef CONFIG_GPIO_HYST_PORTG_0
+#define HYST_PORTG_0		(1 << 0)
+#else
+#define HYST_PORTG_0		(0 << 0)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_1_4
+#define HYST_PORTG_1_4		(1 << 2)
+#else
+#define HYST_PORTG_1_4		(0 << 2)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_5_6
+#define HYST_PORTG_5_6		(1 << 4)
+#else
+#define HYST_PORTG_5_6		(0 << 4)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_7_8
+#define HYST_PORTG_7_8		(1 << 6)
+#else
+#define HYST_PORTG_7_8		(0 << 6)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_9
+#define HYST_PORTG_9		(1 << 8)
+#else
+#define HYST_PORTG_9		(0 << 8)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_10
+#define HYST_PORTG_10		(1 << 10)
+#else
+#define HYST_PORTG_10		(0 << 10)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_11_13
+#define HYST_PORTG_11_13	(1 << 12)
+#else
+#define HYST_PORTG_11_13	(0 << 12)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_14_15
+#define HYST_PORTG_14_15	(1 << 14)
+#else
+#define HYST_PORTG_14_15	(0 << 14)
+#endif
+
+#define HYST_PORTG_0_15	(HYST_PORTG_0 | HYST_PORTG_1_4 | HYST_PORTG_5_6 | \
+		HYST_PORTG_7_8 | HYST_PORTG_9 | HYST_PORTG_10 | \
+		HYST_PORTG_11_13 | HYST_PORTG_14_15)
+
+#ifdef CONFIG_GPIO_HYST_PORTH_0_7
+#define HYST_PORTH_0_7		(1 << 0)
+#else
+#define HYST_PORTH_0_7		(0 << 0)
+#endif
+
+#define HYST_PORTH_0_15	(HYST_PORTH_0_7)
+
+#ifdef CONFIG_NONEGPIO_HYST_NMI_RST_BMODE
+#define HYST_NMI_RST_BMODE		(1 << 2)
+#else
+#define HYST_NMI_RST_BMODE		(0 << 2)
+#endif
+#ifdef CONFIG_NONEGPIO_HYST_JTAG
+#define HYST_JTAG			(1 << 4)
+#else
+#define HYST_JTAG			(0 << 4)
+#endif
+
+#define HYST_NONEGPIO	(HYST_NMI_RST_BMODE | HYST_JTAG)
+#define HYST_NONEGPIO_MASK		(0x3C)
+#endif /* CONFIG_BFIN_HYSTERESIS_CONTROL */
+
+#ifdef CONFIG_BF518
+#define CPU "BF518"
+#define CPUID 0x27e8
+#endif
+#ifdef CONFIG_BF516
+#define CPU "BF516"
+#define CPUID 0x27e8
+#endif
+#ifdef CONFIG_BF514
+#define CPU "BF514"
+#define CPUID 0x27e8
+#endif
+#ifdef CONFIG_BF512
+#define CPU "BF512"
+#define CPUID 0x27e8
+#endif
+
+#ifndef CPU
+#error "Unknown CPU type - This kernel doesn't seem to be configured properly"
+#endif
+
+#endif				/* __MACH_BF518_H__  */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/bfin_serial.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/bfin_serial.h
new file mode 100644
index 0000000..00c603f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/bfin_serial.h
@@ -0,0 +1,14 @@
+/*
+ * mach/bfin_serial.h - Blackfin UART/Serial definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_SERIAL_H__
+#define __BFIN_MACH_SERIAL_H__
+
+#define BFIN_UART_NR_PORTS	2
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/blackfin.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/blackfin.h
new file mode 100644
index 0000000..a882886
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/blackfin.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2008-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#include "bf518.h"
+#include "anomaly.h"
+
+#include <asm/def_LPBlackfin.h>
+#ifdef CONFIG_BF512
+# include "defBF512.h"
+#endif
+#ifdef CONFIG_BF514
+# include "defBF514.h"
+#endif
+#ifdef CONFIG_BF516
+# include "defBF516.h"
+#endif
+#ifdef CONFIG_BF518
+# include "defBF518.h"
+#endif
+
+#ifndef __ASSEMBLY__
+# include <asm/cdef_LPBlackfin.h>
+# ifdef CONFIG_BF512
+#  include "cdefBF512.h"
+# endif
+# ifdef CONFIG_BF514
+#  include "cdefBF514.h"
+# endif
+# ifdef CONFIG_BF516
+#  include "cdefBF516.h"
+# endif
+# ifdef CONFIG_BF518
+#  include "cdefBF518.h"
+# endif
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/cdefBF512.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/cdefBF512.h
new file mode 100644
index 0000000..1c03ad4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/cdefBF512.h
@@ -0,0 +1,1043 @@
+/*
+ * Copyright 2008-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _CDEF_BF512_H
+#define _CDEF_BF512_H
+
+/* Clock and System Control	(0xFFC00000 - 0xFFC000FF)								*/
+#define bfin_read_PLL_CTL()			bfin_read16(PLL_CTL)
+#define bfin_read_PLL_DIV()			bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val)			bfin_write16(PLL_DIV, val)
+#define bfin_read_VR_CTL()			bfin_read16(VR_CTL)
+#define bfin_read_PLL_STAT()			bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val)		bfin_write16(PLL_STAT, val)
+#define bfin_read_PLL_LOCKCNT()			bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val)		bfin_write16(PLL_LOCKCNT, val)
+#define bfin_read_CHIPID()			bfin_read32(CHIPID)
+#define bfin_write_CHIPID(val)			bfin_write32(CHIPID, val)
+
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF)							*/
+#define bfin_read_SWRST()			bfin_read16(SWRST)
+#define bfin_write_SWRST(val)			bfin_write16(SWRST, val)
+#define bfin_read_SYSCR()			bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val)			bfin_write16(SYSCR, val)
+
+#define bfin_read_SIC_RVECT()			bfin_read32(SIC_RVECT)
+#define bfin_write_SIC_RVECT(val)		bfin_write32(SIC_RVECT, val)
+#define bfin_read_SIC_IMASK0()			bfin_read32(SIC_IMASK0)
+#define bfin_write_SIC_IMASK0(val)		bfin_write32(SIC_IMASK0, val)
+#define bfin_read_SIC_IMASK(x)			bfin_read32(SIC_IMASK0 + (x << 6))
+#define bfin_write_SIC_IMASK(x, val)		bfin_write32((SIC_IMASK0 + (x << 6)), val)
+
+#define bfin_read_SIC_IAR0()			bfin_read32(SIC_IAR0)
+#define bfin_write_SIC_IAR0(val)		bfin_write32(SIC_IAR0, val)
+#define bfin_read_SIC_IAR1()			bfin_read32(SIC_IAR1)
+#define bfin_write_SIC_IAR1(val)		bfin_write32(SIC_IAR1, val)
+#define bfin_read_SIC_IAR2()			bfin_read32(SIC_IAR2)
+#define bfin_write_SIC_IAR2(val)		bfin_write32(SIC_IAR2, val)
+#define bfin_read_SIC_IAR3()			bfin_read32(SIC_IAR3)
+#define bfin_write_SIC_IAR3(val)		bfin_write32(SIC_IAR3, val)
+
+#define bfin_read_SIC_ISR0()			bfin_read32(SIC_ISR0)
+#define bfin_write_SIC_ISR0(val)		bfin_write32(SIC_ISR0, val)
+#define bfin_read_SIC_ISR(x)			bfin_read32(SIC_ISR0 + (x << 6))
+#define bfin_write_SIC_ISR(x, val)		bfin_write32((SIC_ISR0 + (x << 6)), val)
+
+#define bfin_read_SIC_IWR0()			bfin_read32(SIC_IWR0)
+#define bfin_write_SIC_IWR0(val)		bfin_write32(SIC_IWR0, val)
+#define bfin_read_SIC_IWR(x)			bfin_read32(SIC_IWR0 + (x << 6))
+#define bfin_write_SIC_IWR(x, val)		bfin_write32((SIC_IWR0 + (x << 6)), val)
+
+/* SIC Additions to ADSP-BF51x (0xFFC0014C - 0xFFC00162) */
+
+#define bfin_read_SIC_IMASK1()			bfin_read32(SIC_IMASK1)
+#define bfin_write_SIC_IMASK1(val)		bfin_write32(SIC_IMASK1, val)
+#define bfin_read_SIC_IAR4()			bfin_read32(SIC_IAR4)
+#define bfin_write_SIC_IAR4(val)		bfin_write32(SIC_IAR4, val)
+#define bfin_read_SIC_IAR5()			bfin_read32(SIC_IAR5)
+#define bfin_write_SIC_IAR5(val)		bfin_write32(SIC_IAR5, val)
+#define bfin_read_SIC_IAR6()			bfin_read32(SIC_IAR6)
+#define bfin_write_SIC_IAR6(val)		bfin_write32(SIC_IAR6, val)
+#define bfin_read_SIC_IAR7()			bfin_read32(SIC_IAR7)
+#define bfin_write_SIC_IAR7(val)		bfin_write32(SIC_IAR7, val)
+#define bfin_read_SIC_ISR1()			bfin_read32(SIC_ISR1)
+#define bfin_write_SIC_ISR1(val)		bfin_write32(SIC_ISR1, val)
+#define bfin_read_SIC_IWR1()			bfin_read32(SIC_IWR1)
+#define bfin_write_SIC_IWR1(val)		bfin_write32(SIC_IWR1, val)
+
+/* Watchdog Timer		(0xFFC00200 - 0xFFC002FF)									*/
+#define bfin_read_WDOG_CTL()			bfin_read16(WDOG_CTL)
+#define bfin_write_WDOG_CTL(val)		bfin_write16(WDOG_CTL, val)
+#define bfin_read_WDOG_CNT()			bfin_read32(WDOG_CNT)
+#define bfin_write_WDOG_CNT(val)		bfin_write32(WDOG_CNT, val)
+#define bfin_read_WDOG_STAT()			bfin_read32(WDOG_STAT)
+#define bfin_write_WDOG_STAT(val)		bfin_write32(WDOG_STAT, val)
+
+
+/* Real Time Clock		(0xFFC00300 - 0xFFC003FF)									*/
+#define bfin_read_RTC_STAT()			bfin_read32(RTC_STAT)
+#define bfin_write_RTC_STAT(val)		bfin_write32(RTC_STAT, val)
+#define bfin_read_RTC_ICTL()			bfin_read16(RTC_ICTL)
+#define bfin_write_RTC_ICTL(val)		bfin_write16(RTC_ICTL, val)
+#define bfin_read_RTC_ISTAT()			bfin_read16(RTC_ISTAT)
+#define bfin_write_RTC_ISTAT(val)		bfin_write16(RTC_ISTAT, val)
+#define bfin_read_RTC_SWCNT()			bfin_read16(RTC_SWCNT)
+#define bfin_write_RTC_SWCNT(val)		bfin_write16(RTC_SWCNT, val)
+#define bfin_read_RTC_ALARM()			bfin_read32(RTC_ALARM)
+#define bfin_write_RTC_ALARM(val)		bfin_write32(RTC_ALARM, val)
+#define bfin_read_RTC_FAST()			bfin_read16(RTC_FAST)
+#define bfin_write_RTC_FAST(val)		bfin_write16(RTC_FAST, val)
+#define bfin_read_RTC_PREN()			bfin_read16(RTC_PREN)
+#define bfin_write_RTC_PREN(val)		bfin_write16(RTC_PREN, val)
+
+
+/* UART0 Controller		(0xFFC00400 - 0xFFC004FF)									*/
+#define bfin_read_UART0_THR()			bfin_read16(UART0_THR)
+#define bfin_write_UART0_THR(val)		bfin_write16(UART0_THR, val)
+#define bfin_read_UART0_RBR()			bfin_read16(UART0_RBR)
+#define bfin_write_UART0_RBR(val)		bfin_write16(UART0_RBR, val)
+#define bfin_read_UART0_DLL()			bfin_read16(UART0_DLL)
+#define bfin_write_UART0_DLL(val)		bfin_write16(UART0_DLL, val)
+#define bfin_read_UART0_IER()			bfin_read16(UART0_IER)
+#define bfin_write_UART0_IER(val)		bfin_write16(UART0_IER, val)
+#define bfin_read_UART0_DLH()			bfin_read16(UART0_DLH)
+#define bfin_write_UART0_DLH(val)		bfin_write16(UART0_DLH, val)
+#define bfin_read_UART0_IIR()			bfin_read16(UART0_IIR)
+#define bfin_write_UART0_IIR(val)		bfin_write16(UART0_IIR, val)
+#define bfin_read_UART0_LCR()			bfin_read16(UART0_LCR)
+#define bfin_write_UART0_LCR(val)		bfin_write16(UART0_LCR, val)
+#define bfin_read_UART0_MCR()			bfin_read16(UART0_MCR)
+#define bfin_write_UART0_MCR(val)		bfin_write16(UART0_MCR, val)
+#define bfin_read_UART0_LSR()			bfin_read16(UART0_LSR)
+#define bfin_write_UART0_LSR(val)		bfin_write16(UART0_LSR, val)
+#define bfin_read_UART0_MSR()			bfin_read16(UART0_MSR)
+#define bfin_write_UART0_MSR(val)		bfin_write16(UART0_MSR, val)
+#define bfin_read_UART0_SCR()			bfin_read16(UART0_SCR)
+#define bfin_write_UART0_SCR(val)		bfin_write16(UART0_SCR, val)
+#define bfin_read_UART0_GCTL()			bfin_read16(UART0_GCTL)
+#define bfin_write_UART0_GCTL(val)		bfin_write16(UART0_GCTL, val)
+
+
+/* TIMER0-7 Registers		(0xFFC00600 - 0xFFC006FF)								*/
+#define bfin_read_TIMER0_CONFIG()		bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val)		bfin_write16(TIMER0_CONFIG, val)
+#define bfin_read_TIMER0_COUNTER()		bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val)		bfin_write32(TIMER0_COUNTER, val)
+#define bfin_read_TIMER0_PERIOD()		bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val)		bfin_write32(TIMER0_PERIOD, val)
+#define bfin_read_TIMER0_WIDTH()		bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val)		bfin_write32(TIMER0_WIDTH, val)
+
+#define bfin_read_TIMER1_CONFIG()		bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val)		bfin_write16(TIMER1_CONFIG, val)
+#define bfin_read_TIMER1_COUNTER()		bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val)		bfin_write32(TIMER1_COUNTER, val)
+#define bfin_read_TIMER1_PERIOD()		bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val)		bfin_write32(TIMER1_PERIOD, val)
+#define bfin_read_TIMER1_WIDTH()		bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val)		bfin_write32(TIMER1_WIDTH, val)
+
+#define bfin_read_TIMER2_CONFIG()		bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val)		bfin_write16(TIMER2_CONFIG, val)
+#define bfin_read_TIMER2_COUNTER()		bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val)		bfin_write32(TIMER2_COUNTER, val)
+#define bfin_read_TIMER2_PERIOD()		bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val)		bfin_write32(TIMER2_PERIOD, val)
+#define bfin_read_TIMER2_WIDTH()		bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val)		bfin_write32(TIMER2_WIDTH, val)
+
+#define bfin_read_TIMER3_CONFIG()		bfin_read16(TIMER3_CONFIG)
+#define bfin_write_TIMER3_CONFIG(val)		bfin_write16(TIMER3_CONFIG, val)
+#define bfin_read_TIMER3_COUNTER()		bfin_read32(TIMER3_COUNTER)
+#define bfin_write_TIMER3_COUNTER(val)		bfin_write32(TIMER3_COUNTER, val)
+#define bfin_read_TIMER3_PERIOD()		bfin_read32(TIMER3_PERIOD)
+#define bfin_write_TIMER3_PERIOD(val)		bfin_write32(TIMER3_PERIOD, val)
+#define bfin_read_TIMER3_WIDTH()		bfin_read32(TIMER3_WIDTH)
+#define bfin_write_TIMER3_WIDTH(val)		bfin_write32(TIMER3_WIDTH, val)
+
+#define bfin_read_TIMER4_CONFIG()		bfin_read16(TIMER4_CONFIG)
+#define bfin_write_TIMER4_CONFIG(val)		bfin_write16(TIMER4_CONFIG, val)
+#define bfin_read_TIMER4_COUNTER()		bfin_read32(TIMER4_COUNTER)
+#define bfin_write_TIMER4_COUNTER(val)		bfin_write32(TIMER4_COUNTER, val)
+#define bfin_read_TIMER4_PERIOD()		bfin_read32(TIMER4_PERIOD)
+#define bfin_write_TIMER4_PERIOD(val)		bfin_write32(TIMER4_PERIOD, val)
+#define bfin_read_TIMER4_WIDTH()		bfin_read32(TIMER4_WIDTH)
+#define bfin_write_TIMER4_WIDTH(val)		bfin_write32(TIMER4_WIDTH, val)
+
+#define bfin_read_TIMER5_CONFIG()		bfin_read16(TIMER5_CONFIG)
+#define bfin_write_TIMER5_CONFIG(val)		bfin_write16(TIMER5_CONFIG, val)
+#define bfin_read_TIMER5_COUNTER()		bfin_read32(TIMER5_COUNTER)
+#define bfin_write_TIMER5_COUNTER(val)		bfin_write32(TIMER5_COUNTER, val)
+#define bfin_read_TIMER5_PERIOD()		bfin_read32(TIMER5_PERIOD)
+#define bfin_write_TIMER5_PERIOD(val)		bfin_write32(TIMER5_PERIOD, val)
+#define bfin_read_TIMER5_WIDTH()		bfin_read32(TIMER5_WIDTH)
+#define bfin_write_TIMER5_WIDTH(val)		bfin_write32(TIMER5_WIDTH, val)
+
+#define bfin_read_TIMER6_CONFIG()		bfin_read16(TIMER6_CONFIG)
+#define bfin_write_TIMER6_CONFIG(val)		bfin_write16(TIMER6_CONFIG, val)
+#define bfin_read_TIMER6_COUNTER()		bfin_read32(TIMER6_COUNTER)
+#define bfin_write_TIMER6_COUNTER(val)		bfin_write32(TIMER6_COUNTER, val)
+#define bfin_read_TIMER6_PERIOD()		bfin_read32(TIMER6_PERIOD)
+#define bfin_write_TIMER6_PERIOD(val)		bfin_write32(TIMER6_PERIOD, val)
+#define bfin_read_TIMER6_WIDTH()		bfin_read32(TIMER6_WIDTH)
+#define bfin_write_TIMER6_WIDTH(val)		bfin_write32(TIMER6_WIDTH, val)
+
+#define bfin_read_TIMER7_CONFIG()		bfin_read16(TIMER7_CONFIG)
+#define bfin_write_TIMER7_CONFIG(val)		bfin_write16(TIMER7_CONFIG, val)
+#define bfin_read_TIMER7_COUNTER()		bfin_read32(TIMER7_COUNTER)
+#define bfin_write_TIMER7_COUNTER(val)		bfin_write32(TIMER7_COUNTER, val)
+#define bfin_read_TIMER7_PERIOD()		bfin_read32(TIMER7_PERIOD)
+#define bfin_write_TIMER7_PERIOD(val)		bfin_write32(TIMER7_PERIOD, val)
+#define bfin_read_TIMER7_WIDTH()		bfin_read32(TIMER7_WIDTH)
+#define bfin_write_TIMER7_WIDTH(val)		bfin_write32(TIMER7_WIDTH, val)
+
+#define bfin_read_TIMER_ENABLE()		bfin_read16(TIMER_ENABLE)
+#define bfin_write_TIMER_ENABLE(val)		bfin_write16(TIMER_ENABLE, val)
+#define bfin_read_TIMER_DISABLE()		bfin_read16(TIMER_DISABLE)
+#define bfin_write_TIMER_DISABLE(val)		bfin_write16(TIMER_DISABLE, val)
+#define bfin_read_TIMER_STATUS()		bfin_read32(TIMER_STATUS)
+#define bfin_write_TIMER_STATUS(val)		bfin_write32(TIMER_STATUS, val)
+
+
+/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF)								*/
+#define bfin_read_PORTFIO()			bfin_read16(PORTFIO)
+#define bfin_write_PORTFIO(val)			bfin_write16(PORTFIO, val)
+#define bfin_read_PORTFIO_CLEAR()		bfin_read16(PORTFIO_CLEAR)
+#define bfin_write_PORTFIO_CLEAR(val)		bfin_write16(PORTFIO_CLEAR, val)
+#define bfin_read_PORTFIO_SET()			bfin_read16(PORTFIO_SET)
+#define bfin_write_PORTFIO_SET(val)		bfin_write16(PORTFIO_SET, val)
+#define bfin_read_PORTFIO_TOGGLE()		bfin_read16(PORTFIO_TOGGLE)
+#define bfin_write_PORTFIO_TOGGLE(val)		bfin_write16(PORTFIO_TOGGLE, val)
+#define bfin_read_PORTFIO_MASKA()		bfin_read16(PORTFIO_MASKA)
+#define bfin_write_PORTFIO_MASKA(val)		bfin_write16(PORTFIO_MASKA, val)
+#define bfin_read_PORTFIO_MASKA_CLEAR()		bfin_read16(PORTFIO_MASKA_CLEAR)
+#define bfin_write_PORTFIO_MASKA_CLEAR(val)	bfin_write16(PORTFIO_MASKA_CLEAR, val)
+#define bfin_read_PORTFIO_MASKA_SET()		bfin_read16(PORTFIO_MASKA_SET)
+#define bfin_write_PORTFIO_MASKA_SET(val)	bfin_write16(PORTFIO_MASKA_SET, val)
+#define bfin_read_PORTFIO_MASKA_TOGGLE()	bfin_read16(PORTFIO_MASKA_TOGGLE)
+#define bfin_write_PORTFIO_MASKA_TOGGLE(val)	bfin_write16(PORTFIO_MASKA_TOGGLE, val)
+#define bfin_read_PORTFIO_MASKB()		bfin_read16(PORTFIO_MASKB)
+#define bfin_write_PORTFIO_MASKB(val)		bfin_write16(PORTFIO_MASKB, val)
+#define bfin_read_PORTFIO_MASKB_CLEAR()		bfin_read16(PORTFIO_MASKB_CLEAR)
+#define bfin_write_PORTFIO_MASKB_CLEAR(val)	bfin_write16(PORTFIO_MASKB_CLEAR, val)
+#define bfin_read_PORTFIO_MASKB_SET()		bfin_read16(PORTFIO_MASKB_SET)
+#define bfin_write_PORTFIO_MASKB_SET(val)	bfin_write16(PORTFIO_MASKB_SET, val)
+#define bfin_read_PORTFIO_MASKB_TOGGLE()	bfin_read16(PORTFIO_MASKB_TOGGLE)
+#define bfin_write_PORTFIO_MASKB_TOGGLE(val)	bfin_write16(PORTFIO_MASKB_TOGGLE, val)
+#define bfin_read_PORTFIO_DIR()			bfin_read16(PORTFIO_DIR)
+#define bfin_write_PORTFIO_DIR(val)		bfin_write16(PORTFIO_DIR, val)
+#define bfin_read_PORTFIO_POLAR()		bfin_read16(PORTFIO_POLAR)
+#define bfin_write_PORTFIO_POLAR(val)		bfin_write16(PORTFIO_POLAR, val)
+#define bfin_read_PORTFIO_EDGE()		bfin_read16(PORTFIO_EDGE)
+#define bfin_write_PORTFIO_EDGE(val)		bfin_write16(PORTFIO_EDGE, val)
+#define bfin_read_PORTFIO_BOTH()		bfin_read16(PORTFIO_BOTH)
+#define bfin_write_PORTFIO_BOTH(val)		bfin_write16(PORTFIO_BOTH, val)
+#define bfin_read_PORTFIO_INEN()		bfin_read16(PORTFIO_INEN)
+#define bfin_write_PORTFIO_INEN(val)		bfin_write16(PORTFIO_INEN, val)
+
+
+/* SPORT0 Controller		(0xFFC00800 - 0xFFC008FF)								*/
+#define bfin_read_SPORT0_TCR1()			bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val)		bfin_write16(SPORT0_TCR1, val)
+#define bfin_read_SPORT0_TCR2()			bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val)		bfin_write16(SPORT0_TCR2, val)
+#define bfin_read_SPORT0_TCLKDIV()		bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val)		bfin_write16(SPORT0_TCLKDIV, val)
+#define bfin_read_SPORT0_TFSDIV()		bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val)		bfin_write16(SPORT0_TFSDIV, val)
+#define bfin_read_SPORT0_TX()			bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val)		bfin_write32(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX()			bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val)		bfin_write32(SPORT0_RX, val)
+#define bfin_read_SPORT0_TX32()			bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX32(val)		bfin_write32(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX32()			bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX32(val)		bfin_write32(SPORT0_RX, val)
+#define bfin_read_SPORT0_TX16()			bfin_read16(SPORT0_TX)
+#define bfin_write_SPORT0_TX16(val)		bfin_write16(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX16()			bfin_read16(SPORT0_RX)
+#define bfin_write_SPORT0_RX16(val)		bfin_write16(SPORT0_RX, val)
+#define bfin_read_SPORT0_RCR1()			bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val)		bfin_write16(SPORT0_RCR1, val)
+#define bfin_read_SPORT0_RCR2()			bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val)		bfin_write16(SPORT0_RCR2, val)
+#define bfin_read_SPORT0_RCLKDIV()		bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val)		bfin_write16(SPORT0_RCLKDIV, val)
+#define bfin_read_SPORT0_RFSDIV()		bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val)		bfin_write16(SPORT0_RFSDIV, val)
+#define bfin_read_SPORT0_STAT()			bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val)		bfin_write16(SPORT0_STAT, val)
+#define bfin_read_SPORT0_CHNL()			bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val)		bfin_write16(SPORT0_CHNL, val)
+#define bfin_read_SPORT0_MCMC1()		bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val)		bfin_write16(SPORT0_MCMC1, val)
+#define bfin_read_SPORT0_MCMC2()		bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val)		bfin_write16(SPORT0_MCMC2, val)
+#define bfin_read_SPORT0_MTCS0()		bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val)		bfin_write32(SPORT0_MTCS0, val)
+#define bfin_read_SPORT0_MTCS1()		bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val)		bfin_write32(SPORT0_MTCS1, val)
+#define bfin_read_SPORT0_MTCS2()		bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val)		bfin_write32(SPORT0_MTCS2, val)
+#define bfin_read_SPORT0_MTCS3()		bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val)		bfin_write32(SPORT0_MTCS3, val)
+#define bfin_read_SPORT0_MRCS0()		bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val)		bfin_write32(SPORT0_MRCS0, val)
+#define bfin_read_SPORT0_MRCS1()		bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val)		bfin_write32(SPORT0_MRCS1, val)
+#define bfin_read_SPORT0_MRCS2()		bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val)		bfin_write32(SPORT0_MRCS2, val)
+#define bfin_read_SPORT0_MRCS3()		bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val)		bfin_write32(SPORT0_MRCS3, val)
+
+
+/* SPORT1 Controller		(0xFFC00900 - 0xFFC009FF)								*/
+#define bfin_read_SPORT1_TCR1()			bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val)		bfin_write16(SPORT1_TCR1, val)
+#define bfin_read_SPORT1_TCR2()			bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val)		bfin_write16(SPORT1_TCR2, val)
+#define bfin_read_SPORT1_TCLKDIV()		bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val)		bfin_write16(SPORT1_TCLKDIV, val)
+#define bfin_read_SPORT1_TFSDIV()		bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val)		bfin_write16(SPORT1_TFSDIV, val)
+#define bfin_read_SPORT1_TX()			bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val)		bfin_write32(SPORT1_TX, val)
+#define bfin_read_SPORT1_RX()			bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val)		bfin_write32(SPORT1_RX, val)
+#define bfin_read_SPORT1_TX32()			bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX32(val)		bfin_write32(SPORT1_TX, val)
+#define bfin_read_SPORT1_RX32()			bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX32(val)		bfin_write32(SPORT1_RX, val)
+#define bfin_read_SPORT1_TX16()			bfin_read16(SPORT1_TX)
+#define bfin_write_SPORT1_TX16(val)		bfin_write16(SPORT1_TX, val)
+#define bfin_read_SPORT1_RX16()			bfin_read16(SPORT1_RX)
+#define bfin_write_SPORT1_RX16(val)		bfin_write16(SPORT1_RX, val)
+#define bfin_read_SPORT1_RCR1()			bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val)		bfin_write16(SPORT1_RCR1, val)
+#define bfin_read_SPORT1_RCR2()			bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val)		bfin_write16(SPORT1_RCR2, val)
+#define bfin_read_SPORT1_RCLKDIV()		bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val)		bfin_write16(SPORT1_RCLKDIV, val)
+#define bfin_read_SPORT1_RFSDIV()		bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val)		bfin_write16(SPORT1_RFSDIV, val)
+#define bfin_read_SPORT1_STAT()			bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val)		bfin_write16(SPORT1_STAT, val)
+#define bfin_read_SPORT1_CHNL()			bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val)		bfin_write16(SPORT1_CHNL, val)
+#define bfin_read_SPORT1_MCMC1()		bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val)		bfin_write16(SPORT1_MCMC1, val)
+#define bfin_read_SPORT1_MCMC2()		bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val)		bfin_write16(SPORT1_MCMC2, val)
+#define bfin_read_SPORT1_MTCS0()		bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val)		bfin_write32(SPORT1_MTCS0, val)
+#define bfin_read_SPORT1_MTCS1()		bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val)		bfin_write32(SPORT1_MTCS1, val)
+#define bfin_read_SPORT1_MTCS2()		bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val)		bfin_write32(SPORT1_MTCS2, val)
+#define bfin_read_SPORT1_MTCS3()		bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val)		bfin_write32(SPORT1_MTCS3, val)
+#define bfin_read_SPORT1_MRCS0()		bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val)		bfin_write32(SPORT1_MRCS0, val)
+#define bfin_read_SPORT1_MRCS1()		bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val)		bfin_write32(SPORT1_MRCS1, val)
+#define bfin_read_SPORT1_MRCS2()		bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val)		bfin_write32(SPORT1_MRCS2, val)
+#define bfin_read_SPORT1_MRCS3()		bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val)		bfin_write32(SPORT1_MRCS3, val)
+
+
+/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF)							*/
+#define bfin_read_EBIU_AMGCTL()			bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val)		bfin_write16(EBIU_AMGCTL, val)
+#define bfin_read_EBIU_AMBCTL0()		bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val)		bfin_write32(EBIU_AMBCTL0, val)
+#define bfin_read_EBIU_AMBCTL1()		bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val)		bfin_write32(EBIU_AMBCTL1, val)
+#define bfin_read_EBIU_SDGCTL()			bfin_read32(EBIU_SDGCTL)
+#define bfin_write_EBIU_SDGCTL(val)		bfin_write32(EBIU_SDGCTL, val)
+#define bfin_read_EBIU_SDBCTL()			bfin_read16(EBIU_SDBCTL)
+#define bfin_write_EBIU_SDBCTL(val)		bfin_write16(EBIU_SDBCTL, val)
+#define bfin_read_EBIU_SDRRC()			bfin_read16(EBIU_SDRRC)
+#define bfin_write_EBIU_SDRRC(val)		bfin_write16(EBIU_SDRRC, val)
+#define bfin_read_EBIU_SDSTAT()			bfin_read16(EBIU_SDSTAT)
+#define bfin_write_EBIU_SDSTAT(val)		bfin_write16(EBIU_SDSTAT, val)
+
+
+/* DMA Traffic Control Registers													*/
+#define bfin_read_DMAC_TC_PER()			bfin_read16(DMAC_TC_PER)
+#define bfin_write_DMAC_TC_PER(val)		bfin_write16(DMAC_TC_PER, val)
+#define bfin_read_DMAC_TC_CNT()			bfin_read16(DMAC_TC_CNT)
+#define bfin_write_DMAC_TC_CNT(val)		bfin_write16(DMAC_TC_CNT, val)
+
+/* DMA Controller																	*/
+#define bfin_read_DMA0_CONFIG()			bfin_read16(DMA0_CONFIG)
+#define bfin_write_DMA0_CONFIG(val)		bfin_write16(DMA0_CONFIG, val)
+#define bfin_read_DMA0_NEXT_DESC_PTR()		bfin_read32(DMA0_NEXT_DESC_PTR)
+#define bfin_write_DMA0_NEXT_DESC_PTR(val)	bfin_write32(DMA0_NEXT_DESC_PTR, val)
+#define bfin_read_DMA0_START_ADDR()		bfin_read32(DMA0_START_ADDR)
+#define bfin_write_DMA0_START_ADDR(val)		bfin_write32(DMA0_START_ADDR, val)
+#define bfin_read_DMA0_X_COUNT()		bfin_read16(DMA0_X_COUNT)
+#define bfin_write_DMA0_X_COUNT(val)		bfin_write16(DMA0_X_COUNT, val)
+#define bfin_read_DMA0_Y_COUNT()		bfin_read16(DMA0_Y_COUNT)
+#define bfin_write_DMA0_Y_COUNT(val)		bfin_write16(DMA0_Y_COUNT, val)
+#define bfin_read_DMA0_X_MODIFY()		bfin_read16(DMA0_X_MODIFY)
+#define bfin_write_DMA0_X_MODIFY(val)		bfin_write16(DMA0_X_MODIFY, val)
+#define bfin_read_DMA0_Y_MODIFY()		bfin_read16(DMA0_Y_MODIFY)
+#define bfin_write_DMA0_Y_MODIFY(val)		bfin_write16(DMA0_Y_MODIFY, val)
+#define bfin_read_DMA0_CURR_DESC_PTR()		bfin_read32(DMA0_CURR_DESC_PTR)
+#define bfin_write_DMA0_CURR_DESC_PTR(val)	bfin_write32(DMA0_CURR_DESC_PTR, val)
+#define bfin_read_DMA0_CURR_ADDR()		bfin_read32(DMA0_CURR_ADDR)
+#define bfin_write_DMA0_CURR_ADDR(val)		bfin_write32(DMA0_CURR_ADDR, val)
+#define bfin_read_DMA0_CURR_X_COUNT()		bfin_read16(DMA0_CURR_X_COUNT)
+#define bfin_write_DMA0_CURR_X_COUNT(val)	bfin_write16(DMA0_CURR_X_COUNT, val)
+#define bfin_read_DMA0_CURR_Y_COUNT()		bfin_read16(DMA0_CURR_Y_COUNT)
+#define bfin_write_DMA0_CURR_Y_COUNT(val)	bfin_write16(DMA0_CURR_Y_COUNT, val)
+#define bfin_read_DMA0_IRQ_STATUS()		bfin_read16(DMA0_IRQ_STATUS)
+#define bfin_write_DMA0_IRQ_STATUS(val)		bfin_write16(DMA0_IRQ_STATUS, val)
+#define bfin_read_DMA0_PERIPHERAL_MAP()		bfin_read16(DMA0_PERIPHERAL_MAP)
+#define bfin_write_DMA0_PERIPHERAL_MAP(val)	bfin_write16(DMA0_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA1_CONFIG()			bfin_read16(DMA1_CONFIG)
+#define bfin_write_DMA1_CONFIG(val)		bfin_write16(DMA1_CONFIG, val)
+#define bfin_read_DMA1_NEXT_DESC_PTR()		bfin_read32(DMA1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_NEXT_DESC_PTR(val)	bfin_write32(DMA1_NEXT_DESC_PTR, val)
+#define bfin_read_DMA1_START_ADDR()		bfin_read32(DMA1_START_ADDR)
+#define bfin_write_DMA1_START_ADDR(val)		bfin_write32(DMA1_START_ADDR, val)
+#define bfin_read_DMA1_X_COUNT()		bfin_read16(DMA1_X_COUNT)
+#define bfin_write_DMA1_X_COUNT(val)		bfin_write16(DMA1_X_COUNT, val)
+#define bfin_read_DMA1_Y_COUNT()		bfin_read16(DMA1_Y_COUNT)
+#define bfin_write_DMA1_Y_COUNT(val)		bfin_write16(DMA1_Y_COUNT, val)
+#define bfin_read_DMA1_X_MODIFY()		bfin_read16(DMA1_X_MODIFY)
+#define bfin_write_DMA1_X_MODIFY(val)		bfin_write16(DMA1_X_MODIFY, val)
+#define bfin_read_DMA1_Y_MODIFY()		bfin_read16(DMA1_Y_MODIFY)
+#define bfin_write_DMA1_Y_MODIFY(val)		bfin_write16(DMA1_Y_MODIFY, val)
+#define bfin_read_DMA1_CURR_DESC_PTR()		bfin_read32(DMA1_CURR_DESC_PTR)
+#define bfin_write_DMA1_CURR_DESC_PTR(val)	bfin_write32(DMA1_CURR_DESC_PTR, val)
+#define bfin_read_DMA1_CURR_ADDR()		bfin_read32(DMA1_CURR_ADDR)
+#define bfin_write_DMA1_CURR_ADDR(val)		bfin_write32(DMA1_CURR_ADDR, val)
+#define bfin_read_DMA1_CURR_X_COUNT()		bfin_read16(DMA1_CURR_X_COUNT)
+#define bfin_write_DMA1_CURR_X_COUNT(val)	bfin_write16(DMA1_CURR_X_COUNT, val)
+#define bfin_read_DMA1_CURR_Y_COUNT()		bfin_read16(DMA1_CURR_Y_COUNT)
+#define bfin_write_DMA1_CURR_Y_COUNT(val)	bfin_write16(DMA1_CURR_Y_COUNT, val)
+#define bfin_read_DMA1_IRQ_STATUS()		bfin_read16(DMA1_IRQ_STATUS)
+#define bfin_write_DMA1_IRQ_STATUS(val)		bfin_write16(DMA1_IRQ_STATUS, val)
+#define bfin_read_DMA1_PERIPHERAL_MAP()		bfin_read16(DMA1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_PERIPHERAL_MAP(val)	bfin_write16(DMA1_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA2_CONFIG()			bfin_read16(DMA2_CONFIG)
+#define bfin_write_DMA2_CONFIG(val)		bfin_write16(DMA2_CONFIG, val)
+#define bfin_read_DMA2_NEXT_DESC_PTR()		bfin_read32(DMA2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_NEXT_DESC_PTR(val)	bfin_write32(DMA2_NEXT_DESC_PTR, val)
+#define bfin_read_DMA2_START_ADDR()		bfin_read32(DMA2_START_ADDR)
+#define bfin_write_DMA2_START_ADDR(val)		bfin_write32(DMA2_START_ADDR, val)
+#define bfin_read_DMA2_X_COUNT()		bfin_read16(DMA2_X_COUNT)
+#define bfin_write_DMA2_X_COUNT(val)		bfin_write16(DMA2_X_COUNT, val)
+#define bfin_read_DMA2_Y_COUNT()		bfin_read16(DMA2_Y_COUNT)
+#define bfin_write_DMA2_Y_COUNT(val)		bfin_write16(DMA2_Y_COUNT, val)
+#define bfin_read_DMA2_X_MODIFY()		bfin_read16(DMA2_X_MODIFY)
+#define bfin_write_DMA2_X_MODIFY(val)		bfin_write16(DMA2_X_MODIFY, val)
+#define bfin_read_DMA2_Y_MODIFY()		bfin_read16(DMA2_Y_MODIFY)
+#define bfin_write_DMA2_Y_MODIFY(val)		bfin_write16(DMA2_Y_MODIFY, val)
+#define bfin_read_DMA2_CURR_DESC_PTR()		bfin_read32(DMA2_CURR_DESC_PTR)
+#define bfin_write_DMA2_CURR_DESC_PTR(val)	bfin_write32(DMA2_CURR_DESC_PTR, val)
+#define bfin_read_DMA2_CURR_ADDR()		bfin_read32(DMA2_CURR_ADDR)
+#define bfin_write_DMA2_CURR_ADDR(val)		bfin_write32(DMA2_CURR_ADDR, val)
+#define bfin_read_DMA2_CURR_X_COUNT()		bfin_read16(DMA2_CURR_X_COUNT)
+#define bfin_write_DMA2_CURR_X_COUNT(val)	bfin_write16(DMA2_CURR_X_COUNT, val)
+#define bfin_read_DMA2_CURR_Y_COUNT()		bfin_read16(DMA2_CURR_Y_COUNT)
+#define bfin_write_DMA2_CURR_Y_COUNT(val)	bfin_write16(DMA2_CURR_Y_COUNT, val)
+#define bfin_read_DMA2_IRQ_STATUS()		bfin_read16(DMA2_IRQ_STATUS)
+#define bfin_write_DMA2_IRQ_STATUS(val)		bfin_write16(DMA2_IRQ_STATUS, val)
+#define bfin_read_DMA2_PERIPHERAL_MAP()		bfin_read16(DMA2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_PERIPHERAL_MAP(val)	bfin_write16(DMA2_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA3_CONFIG()			bfin_read16(DMA3_CONFIG)
+#define bfin_write_DMA3_CONFIG(val)		bfin_write16(DMA3_CONFIG, val)
+#define bfin_read_DMA3_NEXT_DESC_PTR()		bfin_read32(DMA3_NEXT_DESC_PTR)
+#define bfin_write_DMA3_NEXT_DESC_PTR(val)	bfin_write32(DMA3_NEXT_DESC_PTR, val)
+#define bfin_read_DMA3_START_ADDR()		bfin_read32(DMA3_START_ADDR)
+#define bfin_write_DMA3_START_ADDR(val)		bfin_write32(DMA3_START_ADDR, val)
+#define bfin_read_DMA3_X_COUNT()		bfin_read16(DMA3_X_COUNT)
+#define bfin_write_DMA3_X_COUNT(val)		bfin_write16(DMA3_X_COUNT, val)
+#define bfin_read_DMA3_Y_COUNT()		bfin_read16(DMA3_Y_COUNT)
+#define bfin_write_DMA3_Y_COUNT(val)		bfin_write16(DMA3_Y_COUNT, val)
+#define bfin_read_DMA3_X_MODIFY()		bfin_read16(DMA3_X_MODIFY)
+#define bfin_write_DMA3_X_MODIFY(val)		bfin_write16(DMA3_X_MODIFY, val)
+#define bfin_read_DMA3_Y_MODIFY()		bfin_read16(DMA3_Y_MODIFY)
+#define bfin_write_DMA3_Y_MODIFY(val)		bfin_write16(DMA3_Y_MODIFY, val)
+#define bfin_read_DMA3_CURR_DESC_PTR()		bfin_read32(DMA3_CURR_DESC_PTR)
+#define bfin_write_DMA3_CURR_DESC_PTR(val)	bfin_write32(DMA3_CURR_DESC_PTR, val)
+#define bfin_read_DMA3_CURR_ADDR()		bfin_read32(DMA3_CURR_ADDR)
+#define bfin_write_DMA3_CURR_ADDR(val)		bfin_write32(DMA3_CURR_ADDR, val)
+#define bfin_read_DMA3_CURR_X_COUNT()		bfin_read16(DMA3_CURR_X_COUNT)
+#define bfin_write_DMA3_CURR_X_COUNT(val)	bfin_write16(DMA3_CURR_X_COUNT, val)
+#define bfin_read_DMA3_CURR_Y_COUNT()		bfin_read16(DMA3_CURR_Y_COUNT)
+#define bfin_write_DMA3_CURR_Y_COUNT(val)	bfin_write16(DMA3_CURR_Y_COUNT, val)
+#define bfin_read_DMA3_IRQ_STATUS()		bfin_read16(DMA3_IRQ_STATUS)
+#define bfin_write_DMA3_IRQ_STATUS(val)		bfin_write16(DMA3_IRQ_STATUS, val)
+#define bfin_read_DMA3_PERIPHERAL_MAP()		bfin_read16(DMA3_PERIPHERAL_MAP)
+#define bfin_write_DMA3_PERIPHERAL_MAP(val)	bfin_write16(DMA3_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA4_CONFIG()			bfin_read16(DMA4_CONFIG)
+#define bfin_write_DMA4_CONFIG(val)		bfin_write16(DMA4_CONFIG, val)
+#define bfin_read_DMA4_NEXT_DESC_PTR()		bfin_read32(DMA4_NEXT_DESC_PTR)
+#define bfin_write_DMA4_NEXT_DESC_PTR(val)	bfin_write32(DMA4_NEXT_DESC_PTR, val)
+#define bfin_read_DMA4_START_ADDR()		bfin_read32(DMA4_START_ADDR)
+#define bfin_write_DMA4_START_ADDR(val)		bfin_write32(DMA4_START_ADDR, val)
+#define bfin_read_DMA4_X_COUNT()		bfin_read16(DMA4_X_COUNT)
+#define bfin_write_DMA4_X_COUNT(val)		bfin_write16(DMA4_X_COUNT, val)
+#define bfin_read_DMA4_Y_COUNT()		bfin_read16(DMA4_Y_COUNT)
+#define bfin_write_DMA4_Y_COUNT(val)		bfin_write16(DMA4_Y_COUNT, val)
+#define bfin_read_DMA4_X_MODIFY()		bfin_read16(DMA4_X_MODIFY)
+#define bfin_write_DMA4_X_MODIFY(val)		bfin_write16(DMA4_X_MODIFY, val)
+#define bfin_read_DMA4_Y_MODIFY()		bfin_read16(DMA4_Y_MODIFY)
+#define bfin_write_DMA4_Y_MODIFY(val)		bfin_write16(DMA4_Y_MODIFY, val)
+#define bfin_read_DMA4_CURR_DESC_PTR()		bfin_read32(DMA4_CURR_DESC_PTR)
+#define bfin_write_DMA4_CURR_DESC_PTR(val)	bfin_write32(DMA4_CURR_DESC_PTR, val)
+#define bfin_read_DMA4_CURR_ADDR()		bfin_read32(DMA4_CURR_ADDR)
+#define bfin_write_DMA4_CURR_ADDR(val)		bfin_write32(DMA4_CURR_ADDR, val)
+#define bfin_read_DMA4_CURR_X_COUNT()		bfin_read16(DMA4_CURR_X_COUNT)
+#define bfin_write_DMA4_CURR_X_COUNT(val)	bfin_write16(DMA4_CURR_X_COUNT, val)
+#define bfin_read_DMA4_CURR_Y_COUNT()		bfin_read16(DMA4_CURR_Y_COUNT)
+#define bfin_write_DMA4_CURR_Y_COUNT(val)	bfin_write16(DMA4_CURR_Y_COUNT, val)
+#define bfin_read_DMA4_IRQ_STATUS()		bfin_read16(DMA4_IRQ_STATUS)
+#define bfin_write_DMA4_IRQ_STATUS(val)		bfin_write16(DMA4_IRQ_STATUS, val)
+#define bfin_read_DMA4_PERIPHERAL_MAP()		bfin_read16(DMA4_PERIPHERAL_MAP)
+#define bfin_write_DMA4_PERIPHERAL_MAP(val)	bfin_write16(DMA4_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA5_CONFIG()			bfin_read16(DMA5_CONFIG)
+#define bfin_write_DMA5_CONFIG(val)		bfin_write16(DMA5_CONFIG, val)
+#define bfin_read_DMA5_NEXT_DESC_PTR()		bfin_read32(DMA5_NEXT_DESC_PTR)
+#define bfin_write_DMA5_NEXT_DESC_PTR(val)	bfin_write32(DMA5_NEXT_DESC_PTR, val)
+#define bfin_read_DMA5_START_ADDR()		bfin_read32(DMA5_START_ADDR)
+#define bfin_write_DMA5_START_ADDR(val)		bfin_write32(DMA5_START_ADDR, val)
+#define bfin_read_DMA5_X_COUNT()		bfin_read16(DMA5_X_COUNT)
+#define bfin_write_DMA5_X_COUNT(val)		bfin_write16(DMA5_X_COUNT, val)
+#define bfin_read_DMA5_Y_COUNT()		bfin_read16(DMA5_Y_COUNT)
+#define bfin_write_DMA5_Y_COUNT(val)		bfin_write16(DMA5_Y_COUNT, val)
+#define bfin_read_DMA5_X_MODIFY()		bfin_read16(DMA5_X_MODIFY)
+#define bfin_write_DMA5_X_MODIFY(val)		bfin_write16(DMA5_X_MODIFY, val)
+#define bfin_read_DMA5_Y_MODIFY()		bfin_read16(DMA5_Y_MODIFY)
+#define bfin_write_DMA5_Y_MODIFY(val)		bfin_write16(DMA5_Y_MODIFY, val)
+#define bfin_read_DMA5_CURR_DESC_PTR()		bfin_read32(DMA5_CURR_DESC_PTR)
+#define bfin_write_DMA5_CURR_DESC_PTR(val)	bfin_write32(DMA5_CURR_DESC_PTR, val)
+#define bfin_read_DMA5_CURR_ADDR()		bfin_read32(DMA5_CURR_ADDR)
+#define bfin_write_DMA5_CURR_ADDR(val)		bfin_write32(DMA5_CURR_ADDR, val)
+#define bfin_read_DMA5_CURR_X_COUNT()		bfin_read16(DMA5_CURR_X_COUNT)
+#define bfin_write_DMA5_CURR_X_COUNT(val)	bfin_write16(DMA5_CURR_X_COUNT, val)
+#define bfin_read_DMA5_CURR_Y_COUNT()		bfin_read16(DMA5_CURR_Y_COUNT)
+#define bfin_write_DMA5_CURR_Y_COUNT(val)	bfin_write16(DMA5_CURR_Y_COUNT, val)
+#define bfin_read_DMA5_IRQ_STATUS()		bfin_read16(DMA5_IRQ_STATUS)
+#define bfin_write_DMA5_IRQ_STATUS(val)		bfin_write16(DMA5_IRQ_STATUS, val)
+#define bfin_read_DMA5_PERIPHERAL_MAP()		bfin_read16(DMA5_PERIPHERAL_MAP)
+#define bfin_write_DMA5_PERIPHERAL_MAP(val)	bfin_write16(DMA5_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA6_CONFIG()			bfin_read16(DMA6_CONFIG)
+#define bfin_write_DMA6_CONFIG(val)		bfin_write16(DMA6_CONFIG, val)
+#define bfin_read_DMA6_NEXT_DESC_PTR()		bfin_read32(DMA6_NEXT_DESC_PTR)
+#define bfin_write_DMA6_NEXT_DESC_PTR(val)	bfin_write32(DMA6_NEXT_DESC_PTR, val)
+#define bfin_read_DMA6_START_ADDR()		bfin_read32(DMA6_START_ADDR)
+#define bfin_write_DMA6_START_ADDR(val)		bfin_write32(DMA6_START_ADDR, val)
+#define bfin_read_DMA6_X_COUNT()		bfin_read16(DMA6_X_COUNT)
+#define bfin_write_DMA6_X_COUNT(val)		bfin_write16(DMA6_X_COUNT, val)
+#define bfin_read_DMA6_Y_COUNT()		bfin_read16(DMA6_Y_COUNT)
+#define bfin_write_DMA6_Y_COUNT(val)		bfin_write16(DMA6_Y_COUNT, val)
+#define bfin_read_DMA6_X_MODIFY()		bfin_read16(DMA6_X_MODIFY)
+#define bfin_write_DMA6_X_MODIFY(val)		bfin_write16(DMA6_X_MODIFY, val)
+#define bfin_read_DMA6_Y_MODIFY()		bfin_read16(DMA6_Y_MODIFY)
+#define bfin_write_DMA6_Y_MODIFY(val)		bfin_write16(DMA6_Y_MODIFY, val)
+#define bfin_read_DMA6_CURR_DESC_PTR()		bfin_read32(DMA6_CURR_DESC_PTR)
+#define bfin_write_DMA6_CURR_DESC_PTR(val)	bfin_write32(DMA6_CURR_DESC_PTR, val)
+#define bfin_read_DMA6_CURR_ADDR()		bfin_read32(DMA6_CURR_ADDR)
+#define bfin_write_DMA6_CURR_ADDR(val)		bfin_write32(DMA6_CURR_ADDR, val)
+#define bfin_read_DMA6_CURR_X_COUNT()		bfin_read16(DMA6_CURR_X_COUNT)
+#define bfin_write_DMA6_CURR_X_COUNT(val)	bfin_write16(DMA6_CURR_X_COUNT, val)
+#define bfin_read_DMA6_CURR_Y_COUNT()		bfin_read16(DMA6_CURR_Y_COUNT)
+#define bfin_write_DMA6_CURR_Y_COUNT(val)	bfin_write16(DMA6_CURR_Y_COUNT, val)
+#define bfin_read_DMA6_IRQ_STATUS()		bfin_read16(DMA6_IRQ_STATUS)
+#define bfin_write_DMA6_IRQ_STATUS(val)		bfin_write16(DMA6_IRQ_STATUS, val)
+#define bfin_read_DMA6_PERIPHERAL_MAP()		bfin_read16(DMA6_PERIPHERAL_MAP)
+#define bfin_write_DMA6_PERIPHERAL_MAP(val)	bfin_write16(DMA6_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA7_CONFIG()			bfin_read16(DMA7_CONFIG)
+#define bfin_write_DMA7_CONFIG(val)		bfin_write16(DMA7_CONFIG, val)
+#define bfin_read_DMA7_NEXT_DESC_PTR()		bfin_read32(DMA7_NEXT_DESC_PTR)
+#define bfin_write_DMA7_NEXT_DESC_PTR(val)	bfin_write32(DMA7_NEXT_DESC_PTR, val)
+#define bfin_read_DMA7_START_ADDR()		bfin_read32(DMA7_START_ADDR)
+#define bfin_write_DMA7_START_ADDR(val)		bfin_write32(DMA7_START_ADDR, val)
+#define bfin_read_DMA7_X_COUNT()		bfin_read16(DMA7_X_COUNT)
+#define bfin_write_DMA7_X_COUNT(val)		bfin_write16(DMA7_X_COUNT, val)
+#define bfin_read_DMA7_Y_COUNT()		bfin_read16(DMA7_Y_COUNT)
+#define bfin_write_DMA7_Y_COUNT(val)		bfin_write16(DMA7_Y_COUNT, val)
+#define bfin_read_DMA7_X_MODIFY()		bfin_read16(DMA7_X_MODIFY)
+#define bfin_write_DMA7_X_MODIFY(val)		bfin_write16(DMA7_X_MODIFY, val)
+#define bfin_read_DMA7_Y_MODIFY()		bfin_read16(DMA7_Y_MODIFY)
+#define bfin_write_DMA7_Y_MODIFY(val)		bfin_write16(DMA7_Y_MODIFY, val)
+#define bfin_read_DMA7_CURR_DESC_PTR()		bfin_read32(DMA7_CURR_DESC_PTR)
+#define bfin_write_DMA7_CURR_DESC_PTR(val)	bfin_write32(DMA7_CURR_DESC_PTR, val)
+#define bfin_read_DMA7_CURR_ADDR()		bfin_read32(DMA7_CURR_ADDR)
+#define bfin_write_DMA7_CURR_ADDR(val)		bfin_write32(DMA7_CURR_ADDR, val)
+#define bfin_read_DMA7_CURR_X_COUNT()		bfin_read16(DMA7_CURR_X_COUNT)
+#define bfin_write_DMA7_CURR_X_COUNT(val)	bfin_write16(DMA7_CURR_X_COUNT, val)
+#define bfin_read_DMA7_CURR_Y_COUNT()		bfin_read16(DMA7_CURR_Y_COUNT)
+#define bfin_write_DMA7_CURR_Y_COUNT(val)	bfin_write16(DMA7_CURR_Y_COUNT, val)
+#define bfin_read_DMA7_IRQ_STATUS()		bfin_read16(DMA7_IRQ_STATUS)
+#define bfin_write_DMA7_IRQ_STATUS(val)		bfin_write16(DMA7_IRQ_STATUS, val)
+#define bfin_read_DMA7_PERIPHERAL_MAP()		bfin_read16(DMA7_PERIPHERAL_MAP)
+#define bfin_write_DMA7_PERIPHERAL_MAP(val)	bfin_write16(DMA7_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA8_CONFIG()			bfin_read16(DMA8_CONFIG)
+#define bfin_write_DMA8_CONFIG(val)		bfin_write16(DMA8_CONFIG, val)
+#define bfin_read_DMA8_NEXT_DESC_PTR()		bfin_read32(DMA8_NEXT_DESC_PTR)
+#define bfin_write_DMA8_NEXT_DESC_PTR(val)	bfin_write32(DMA8_NEXT_DESC_PTR, val)
+#define bfin_read_DMA8_START_ADDR()		bfin_read32(DMA8_START_ADDR)
+#define bfin_write_DMA8_START_ADDR(val)		bfin_write32(DMA8_START_ADDR, val)
+#define bfin_read_DMA8_X_COUNT()		bfin_read16(DMA8_X_COUNT)
+#define bfin_write_DMA8_X_COUNT(val)		bfin_write16(DMA8_X_COUNT, val)
+#define bfin_read_DMA8_Y_COUNT()		bfin_read16(DMA8_Y_COUNT)
+#define bfin_write_DMA8_Y_COUNT(val)		bfin_write16(DMA8_Y_COUNT, val)
+#define bfin_read_DMA8_X_MODIFY()		bfin_read16(DMA8_X_MODIFY)
+#define bfin_write_DMA8_X_MODIFY(val)		bfin_write16(DMA8_X_MODIFY, val)
+#define bfin_read_DMA8_Y_MODIFY()		bfin_read16(DMA8_Y_MODIFY)
+#define bfin_write_DMA8_Y_MODIFY(val)		bfin_write16(DMA8_Y_MODIFY, val)
+#define bfin_read_DMA8_CURR_DESC_PTR()		bfin_read32(DMA8_CURR_DESC_PTR)
+#define bfin_write_DMA8_CURR_DESC_PTR(val)	bfin_write32(DMA8_CURR_DESC_PTR, val)
+#define bfin_read_DMA8_CURR_ADDR()		bfin_read32(DMA8_CURR_ADDR)
+#define bfin_write_DMA8_CURR_ADDR(val)		bfin_write32(DMA8_CURR_ADDR, val)
+#define bfin_read_DMA8_CURR_X_COUNT()		bfin_read16(DMA8_CURR_X_COUNT)
+#define bfin_write_DMA8_CURR_X_COUNT(val)	bfin_write16(DMA8_CURR_X_COUNT, val)
+#define bfin_read_DMA8_CURR_Y_COUNT()		bfin_read16(DMA8_CURR_Y_COUNT)
+#define bfin_write_DMA8_CURR_Y_COUNT(val)	bfin_write16(DMA8_CURR_Y_COUNT, val)
+#define bfin_read_DMA8_IRQ_STATUS()		bfin_read16(DMA8_IRQ_STATUS)
+#define bfin_write_DMA8_IRQ_STATUS(val)		bfin_write16(DMA8_IRQ_STATUS, val)
+#define bfin_read_DMA8_PERIPHERAL_MAP()		bfin_read16(DMA8_PERIPHERAL_MAP)
+#define bfin_write_DMA8_PERIPHERAL_MAP(val)	bfin_write16(DMA8_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA9_CONFIG()			bfin_read16(DMA9_CONFIG)
+#define bfin_write_DMA9_CONFIG(val)		bfin_write16(DMA9_CONFIG, val)
+#define bfin_read_DMA9_NEXT_DESC_PTR()		bfin_read32(DMA9_NEXT_DESC_PTR)
+#define bfin_write_DMA9_NEXT_DESC_PTR(val)	bfin_write32(DMA9_NEXT_DESC_PTR, val)
+#define bfin_read_DMA9_START_ADDR()		bfin_read32(DMA9_START_ADDR)
+#define bfin_write_DMA9_START_ADDR(val)		bfin_write32(DMA9_START_ADDR, val)
+#define bfin_read_DMA9_X_COUNT()		bfin_read16(DMA9_X_COUNT)
+#define bfin_write_DMA9_X_COUNT(val)		bfin_write16(DMA9_X_COUNT, val)
+#define bfin_read_DMA9_Y_COUNT()		bfin_read16(DMA9_Y_COUNT)
+#define bfin_write_DMA9_Y_COUNT(val)		bfin_write16(DMA9_Y_COUNT, val)
+#define bfin_read_DMA9_X_MODIFY()		bfin_read16(DMA9_X_MODIFY)
+#define bfin_write_DMA9_X_MODIFY(val)		bfin_write16(DMA9_X_MODIFY, val)
+#define bfin_read_DMA9_Y_MODIFY()		bfin_read16(DMA9_Y_MODIFY)
+#define bfin_write_DMA9_Y_MODIFY(val)		bfin_write16(DMA9_Y_MODIFY, val)
+#define bfin_read_DMA9_CURR_DESC_PTR()		bfin_read32(DMA9_CURR_DESC_PTR)
+#define bfin_write_DMA9_CURR_DESC_PTR(val)	bfin_write32(DMA9_CURR_DESC_PTR, val)
+#define bfin_read_DMA9_CURR_ADDR()		bfin_read32(DMA9_CURR_ADDR)
+#define bfin_write_DMA9_CURR_ADDR(val)		bfin_write32(DMA9_CURR_ADDR, val)
+#define bfin_read_DMA9_CURR_X_COUNT()		bfin_read16(DMA9_CURR_X_COUNT)
+#define bfin_write_DMA9_CURR_X_COUNT(val)	bfin_write16(DMA9_CURR_X_COUNT, val)
+#define bfin_read_DMA9_CURR_Y_COUNT()		bfin_read16(DMA9_CURR_Y_COUNT)
+#define bfin_write_DMA9_CURR_Y_COUNT(val)	bfin_write16(DMA9_CURR_Y_COUNT, val)
+#define bfin_read_DMA9_IRQ_STATUS()		bfin_read16(DMA9_IRQ_STATUS)
+#define bfin_write_DMA9_IRQ_STATUS(val)		bfin_write16(DMA9_IRQ_STATUS, val)
+#define bfin_read_DMA9_PERIPHERAL_MAP()		bfin_read16(DMA9_PERIPHERAL_MAP)
+#define bfin_write_DMA9_PERIPHERAL_MAP(val)	bfin_write16(DMA9_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA10_CONFIG()		bfin_read16(DMA10_CONFIG)
+#define bfin_write_DMA10_CONFIG(val)		bfin_write16(DMA10_CONFIG, val)
+#define bfin_read_DMA10_NEXT_DESC_PTR()		bfin_read32(DMA10_NEXT_DESC_PTR)
+#define bfin_write_DMA10_NEXT_DESC_PTR(val)	bfin_write32(DMA10_NEXT_DESC_PTR, val)
+#define bfin_read_DMA10_START_ADDR()		bfin_read32(DMA10_START_ADDR)
+#define bfin_write_DMA10_START_ADDR(val)	bfin_write32(DMA10_START_ADDR, val)
+#define bfin_read_DMA10_X_COUNT()		bfin_read16(DMA10_X_COUNT)
+#define bfin_write_DMA10_X_COUNT(val)		bfin_write16(DMA10_X_COUNT, val)
+#define bfin_read_DMA10_Y_COUNT()		bfin_read16(DMA10_Y_COUNT)
+#define bfin_write_DMA10_Y_COUNT(val)		bfin_write16(DMA10_Y_COUNT, val)
+#define bfin_read_DMA10_X_MODIFY()		bfin_read16(DMA10_X_MODIFY)
+#define bfin_write_DMA10_X_MODIFY(val)		bfin_write16(DMA10_X_MODIFY, val)
+#define bfin_read_DMA10_Y_MODIFY()		bfin_read16(DMA10_Y_MODIFY)
+#define bfin_write_DMA10_Y_MODIFY(val)		bfin_write16(DMA10_Y_MODIFY, val)
+#define bfin_read_DMA10_CURR_DESC_PTR()		bfin_read32(DMA10_CURR_DESC_PTR)
+#define bfin_write_DMA10_CURR_DESC_PTR(val)	bfin_write32(DMA10_CURR_DESC_PTR, val)
+#define bfin_read_DMA10_CURR_ADDR()		bfin_read32(DMA10_CURR_ADDR)
+#define bfin_write_DMA10_CURR_ADDR(val)		bfin_write32(DMA10_CURR_ADDR, val)
+#define bfin_read_DMA10_CURR_X_COUNT()		bfin_read16(DMA10_CURR_X_COUNT)
+#define bfin_write_DMA10_CURR_X_COUNT(val)	bfin_write16(DMA10_CURR_X_COUNT, val)
+#define bfin_read_DMA10_CURR_Y_COUNT()		bfin_read16(DMA10_CURR_Y_COUNT)
+#define bfin_write_DMA10_CURR_Y_COUNT(val)	bfin_write16(DMA10_CURR_Y_COUNT, val)
+#define bfin_read_DMA10_IRQ_STATUS()		bfin_read16(DMA10_IRQ_STATUS)
+#define bfin_write_DMA10_IRQ_STATUS(val)	bfin_write16(DMA10_IRQ_STATUS, val)
+#define bfin_read_DMA10_PERIPHERAL_MAP()	bfin_read16(DMA10_PERIPHERAL_MAP)
+#define bfin_write_DMA10_PERIPHERAL_MAP(val)	bfin_write16(DMA10_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA11_CONFIG()		bfin_read16(DMA11_CONFIG)
+#define bfin_write_DMA11_CONFIG(val)		bfin_write16(DMA11_CONFIG, val)
+#define bfin_read_DMA11_NEXT_DESC_PTR()		bfin_read32(DMA11_NEXT_DESC_PTR)
+#define bfin_write_DMA11_NEXT_DESC_PTR(val)	bfin_write32(DMA11_NEXT_DESC_PTR, val)
+#define bfin_read_DMA11_START_ADDR()		bfin_read32(DMA11_START_ADDR)
+#define bfin_write_DMA11_START_ADDR(val)	bfin_write32(DMA11_START_ADDR, val)
+#define bfin_read_DMA11_X_COUNT()		bfin_read16(DMA11_X_COUNT)
+#define bfin_write_DMA11_X_COUNT(val)		bfin_write16(DMA11_X_COUNT, val)
+#define bfin_read_DMA11_Y_COUNT()		bfin_read16(DMA11_Y_COUNT)
+#define bfin_write_DMA11_Y_COUNT(val)		bfin_write16(DMA11_Y_COUNT, val)
+#define bfin_read_DMA11_X_MODIFY()		bfin_read16(DMA11_X_MODIFY)
+#define bfin_write_DMA11_X_MODIFY(val)		bfin_write16(DMA11_X_MODIFY, val)
+#define bfin_read_DMA11_Y_MODIFY()		bfin_read16(DMA11_Y_MODIFY)
+#define bfin_write_DMA11_Y_MODIFY(val)		bfin_write16(DMA11_Y_MODIFY, val)
+#define bfin_read_DMA11_CURR_DESC_PTR()		bfin_read32(DMA11_CURR_DESC_PTR)
+#define bfin_write_DMA11_CURR_DESC_PTR(val)	bfin_write32(DMA11_CURR_DESC_PTR, val)
+#define bfin_read_DMA11_CURR_ADDR()		bfin_read32(DMA11_CURR_ADDR)
+#define bfin_write_DMA11_CURR_ADDR(val)		bfin_write32(DMA11_CURR_ADDR, val)
+#define bfin_read_DMA11_CURR_X_COUNT()		bfin_read16(DMA11_CURR_X_COUNT)
+#define bfin_write_DMA11_CURR_X_COUNT(val)	bfin_write16(DMA11_CURR_X_COUNT, val)
+#define bfin_read_DMA11_CURR_Y_COUNT()		bfin_read16(DMA11_CURR_Y_COUNT)
+#define bfin_write_DMA11_CURR_Y_COUNT(val)	bfin_write16(DMA11_CURR_Y_COUNT, val)
+#define bfin_read_DMA11_IRQ_STATUS()		bfin_read16(DMA11_IRQ_STATUS)
+#define bfin_write_DMA11_IRQ_STATUS(val)	bfin_write16(DMA11_IRQ_STATUS, val)
+#define bfin_read_DMA11_PERIPHERAL_MAP()	bfin_read16(DMA11_PERIPHERAL_MAP)
+#define bfin_write_DMA11_PERIPHERAL_MAP(val)	bfin_write16(DMA11_PERIPHERAL_MAP, val)
+
+#define bfin_read_MDMA_D0_CONFIG()		bfin_read16(MDMA_D0_CONFIG)
+#define bfin_write_MDMA_D0_CONFIG(val)		bfin_write16(MDMA_D0_CONFIG, val)
+#define bfin_read_MDMA_D0_NEXT_DESC_PTR()	bfin_read32(MDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val)	bfin_write32(MDMA_D0_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D0_START_ADDR()		bfin_read32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val)	bfin_write32(MDMA_D0_START_ADDR, val)
+#define bfin_read_MDMA_D0_X_COUNT()		bfin_read16(MDMA_D0_X_COUNT)
+#define bfin_write_MDMA_D0_X_COUNT(val)		bfin_write16(MDMA_D0_X_COUNT, val)
+#define bfin_read_MDMA_D0_Y_COUNT()		bfin_read16(MDMA_D0_Y_COUNT)
+#define bfin_write_MDMA_D0_Y_COUNT(val)		bfin_write16(MDMA_D0_Y_COUNT, val)
+#define bfin_read_MDMA_D0_X_MODIFY()		bfin_read16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val)	bfin_write16(MDMA_D0_X_MODIFY, val)
+#define bfin_read_MDMA_D0_Y_MODIFY()		bfin_read16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val)	bfin_write16(MDMA_D0_Y_MODIFY, val)
+#define bfin_read_MDMA_D0_CURR_DESC_PTR()	bfin_read32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val)	bfin_write32(MDMA_D0_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D0_CURR_ADDR()		bfin_read32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val)	bfin_write32(MDMA_D0_CURR_ADDR, val)
+#define bfin_read_MDMA_D0_CURR_X_COUNT()	bfin_read16(MDMA_D0_CURR_X_COUNT)
+#define bfin_write_MDMA_D0_CURR_X_COUNT(val)	bfin_write16(MDMA_D0_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D0_CURR_Y_COUNT()	bfin_read16(MDMA_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA_D0_CURR_Y_COUNT(val)	bfin_write16(MDMA_D0_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_D0_IRQ_STATUS()		bfin_read16(MDMA_D0_IRQ_STATUS)
+#define bfin_write_MDMA_D0_IRQ_STATUS(val)	bfin_write16(MDMA_D0_IRQ_STATUS, val)
+#define bfin_read_MDMA_D0_PERIPHERAL_MAP()	bfin_read16(MDMA_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val)	bfin_write16(MDMA_D0_PERIPHERAL_MAP, val)
+
+#define bfin_read_MDMA_S0_CONFIG()		bfin_read16(MDMA_S0_CONFIG)
+#define bfin_write_MDMA_S0_CONFIG(val)		bfin_write16(MDMA_S0_CONFIG, val)
+#define bfin_read_MDMA_S0_NEXT_DESC_PTR()	bfin_read32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val)	bfin_write32(MDMA_S0_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S0_START_ADDR()		bfin_read32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val)	bfin_write32(MDMA_S0_START_ADDR, val)
+#define bfin_read_MDMA_S0_X_COUNT()		bfin_read16(MDMA_S0_X_COUNT)
+#define bfin_write_MDMA_S0_X_COUNT(val)		bfin_write16(MDMA_S0_X_COUNT, val)
+#define bfin_read_MDMA_S0_Y_COUNT()		bfin_read16(MDMA_S0_Y_COUNT)
+#define bfin_write_MDMA_S0_Y_COUNT(val)		bfin_write16(MDMA_S0_Y_COUNT, val)
+#define bfin_read_MDMA_S0_X_MODIFY()		bfin_read16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val)	bfin_write16(MDMA_S0_X_MODIFY, val)
+#define bfin_read_MDMA_S0_Y_MODIFY()		bfin_read16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val)	bfin_write16(MDMA_S0_Y_MODIFY, val)
+#define bfin_read_MDMA_S0_CURR_DESC_PTR()	bfin_read32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val)	bfin_write32(MDMA_S0_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S0_CURR_ADDR()		bfin_read32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val)	bfin_write32(MDMA_S0_CURR_ADDR, val)
+#define bfin_read_MDMA_S0_CURR_X_COUNT()	bfin_read16(MDMA_S0_CURR_X_COUNT)
+#define bfin_write_MDMA_S0_CURR_X_COUNT(val)	bfin_write16(MDMA_S0_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S0_CURR_Y_COUNT()	bfin_read16(MDMA_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA_S0_CURR_Y_COUNT(val)	bfin_write16(MDMA_S0_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S0_IRQ_STATUS()		bfin_read16(MDMA_S0_IRQ_STATUS)
+#define bfin_write_MDMA_S0_IRQ_STATUS(val)	bfin_write16(MDMA_S0_IRQ_STATUS, val)
+#define bfin_read_MDMA_S0_PERIPHERAL_MAP()	bfin_read16(MDMA_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val)	bfin_write16(MDMA_S0_PERIPHERAL_MAP, val)
+
+#define bfin_read_MDMA_D1_CONFIG()		bfin_read16(MDMA_D1_CONFIG)
+#define bfin_write_MDMA_D1_CONFIG(val)		bfin_write16(MDMA_D1_CONFIG, val)
+#define bfin_read_MDMA_D1_NEXT_DESC_PTR()	bfin_read32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val)	bfin_write32(MDMA_D1_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D1_START_ADDR()		bfin_read32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val)	bfin_write32(MDMA_D1_START_ADDR, val)
+#define bfin_read_MDMA_D1_X_COUNT()		bfin_read16(MDMA_D1_X_COUNT)
+#define bfin_write_MDMA_D1_X_COUNT(val)		bfin_write16(MDMA_D1_X_COUNT, val)
+#define bfin_read_MDMA_D1_Y_COUNT()		bfin_read16(MDMA_D1_Y_COUNT)
+#define bfin_write_MDMA_D1_Y_COUNT(val)		bfin_write16(MDMA_D1_Y_COUNT, val)
+#define bfin_read_MDMA_D1_X_MODIFY()		bfin_read16(MDMA_D1_X_MODIFY)
+#define bfin_write_MDMA_D1_X_MODIFY(val)	bfin_write16(MDMA_D1_X_MODIFY, val)
+#define bfin_read_MDMA_D1_Y_MODIFY()		bfin_read16(MDMA_D1_Y_MODIFY)
+#define bfin_write_MDMA_D1_Y_MODIFY(val)	bfin_write16(MDMA_D1_Y_MODIFY, val)
+#define bfin_read_MDMA_D1_CURR_DESC_PTR()	bfin_read32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val)	bfin_write32(MDMA_D1_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D1_CURR_ADDR()		bfin_read32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val)	bfin_write32(MDMA_D1_CURR_ADDR, val)
+#define bfin_read_MDMA_D1_CURR_X_COUNT()	bfin_read16(MDMA_D1_CURR_X_COUNT)
+#define bfin_write_MDMA_D1_CURR_X_COUNT(val)	bfin_write16(MDMA_D1_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D1_CURR_Y_COUNT()	bfin_read16(MDMA_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA_D1_CURR_Y_COUNT(val)	bfin_write16(MDMA_D1_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()		bfin_read16(MDMA_D1_IRQ_STATUS)
+#define bfin_write_MDMA_D1_IRQ_STATUS(val)	bfin_write16(MDMA_D1_IRQ_STATUS, val)
+#define bfin_read_MDMA_D1_PERIPHERAL_MAP()	bfin_read16(MDMA_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val)	bfin_write16(MDMA_D1_PERIPHERAL_MAP, val)
+
+#define bfin_read_MDMA_S1_CONFIG()		bfin_read16(MDMA_S1_CONFIG)
+#define bfin_write_MDMA_S1_CONFIG(val)		bfin_write16(MDMA_S1_CONFIG, val)
+#define bfin_read_MDMA_S1_NEXT_DESC_PTR()	bfin_read32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val)	bfin_write32(MDMA_S1_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S1_START_ADDR()		bfin_read32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val)	bfin_write32(MDMA_S1_START_ADDR, val)
+#define bfin_read_MDMA_S1_X_COUNT()		bfin_read16(MDMA_S1_X_COUNT)
+#define bfin_write_MDMA_S1_X_COUNT(val)		bfin_write16(MDMA_S1_X_COUNT, val)
+#define bfin_read_MDMA_S1_Y_COUNT()		bfin_read16(MDMA_S1_Y_COUNT)
+#define bfin_write_MDMA_S1_Y_COUNT(val)		bfin_write16(MDMA_S1_Y_COUNT, val)
+#define bfin_read_MDMA_S1_X_MODIFY()		bfin_read16(MDMA_S1_X_MODIFY)
+#define bfin_write_MDMA_S1_X_MODIFY(val)	bfin_write16(MDMA_S1_X_MODIFY, val)
+#define bfin_read_MDMA_S1_Y_MODIFY()		bfin_read16(MDMA_S1_Y_MODIFY)
+#define bfin_write_MDMA_S1_Y_MODIFY(val)	bfin_write16(MDMA_S1_Y_MODIFY, val)
+#define bfin_read_MDMA_S1_CURR_DESC_PTR()	bfin_read32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val)	bfin_write32(MDMA_S1_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S1_CURR_ADDR()		bfin_read32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val)	bfin_write32(MDMA_S1_CURR_ADDR, val)
+#define bfin_read_MDMA_S1_CURR_X_COUNT()	bfin_read16(MDMA_S1_CURR_X_COUNT)
+#define bfin_write_MDMA_S1_CURR_X_COUNT(val)	bfin_write16(MDMA_S1_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S1_CURR_Y_COUNT()	bfin_read16(MDMA_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA_S1_CURR_Y_COUNT(val)	bfin_write16(MDMA_S1_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()		bfin_read16(MDMA_S1_IRQ_STATUS)
+#define bfin_write_MDMA_S1_IRQ_STATUS(val)	bfin_write16(MDMA_S1_IRQ_STATUS, val)
+#define bfin_read_MDMA_S1_PERIPHERAL_MAP()	bfin_read16(MDMA_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val)	bfin_write16(MDMA_S1_PERIPHERAL_MAP, val)
+
+
+/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF)							*/
+#define bfin_read_PPI_CONTROL()			bfin_read16(PPI_CONTROL)
+#define bfin_write_PPI_CONTROL(val)		bfin_write16(PPI_CONTROL, val)
+#define bfin_read_PPI_STATUS()			bfin_read16(PPI_STATUS)
+#define bfin_write_PPI_STATUS(val)		bfin_write16(PPI_STATUS, val)
+#define bfin_clear_PPI_STATUS()			bfin_write_PPI_STATUS(0xFFFF)
+#define bfin_read_PPI_DELAY()			bfin_read16(PPI_DELAY)
+#define bfin_write_PPI_DELAY(val)		bfin_write16(PPI_DELAY, val)
+#define bfin_read_PPI_COUNT()			bfin_read16(PPI_COUNT)
+#define bfin_write_PPI_COUNT(val)		bfin_write16(PPI_COUNT, val)
+#define bfin_read_PPI_FRAME()			bfin_read16(PPI_FRAME)
+#define bfin_write_PPI_FRAME(val)		bfin_write16(PPI_FRAME, val)
+
+
+/* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF)								*/
+
+/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)								*/
+#define bfin_read_PORTGIO()			bfin_read16(PORTGIO)
+#define bfin_write_PORTGIO(val)			bfin_write16(PORTGIO, val)
+#define bfin_read_PORTGIO_CLEAR()		bfin_read16(PORTGIO_CLEAR)
+#define bfin_write_PORTGIO_CLEAR(val)		bfin_write16(PORTGIO_CLEAR, val)
+#define bfin_read_PORTGIO_SET()			bfin_read16(PORTGIO_SET)
+#define bfin_write_PORTGIO_SET(val)		bfin_write16(PORTGIO_SET, val)
+#define bfin_read_PORTGIO_TOGGLE()		bfin_read16(PORTGIO_TOGGLE)
+#define bfin_write_PORTGIO_TOGGLE(val)		bfin_write16(PORTGIO_TOGGLE, val)
+#define bfin_read_PORTGIO_MASKA()		bfin_read16(PORTGIO_MASKA)
+#define bfin_write_PORTGIO_MASKA(val)		bfin_write16(PORTGIO_MASKA, val)
+#define bfin_read_PORTGIO_MASKA_CLEAR()		bfin_read16(PORTGIO_MASKA_CLEAR)
+#define bfin_write_PORTGIO_MASKA_CLEAR(val)	bfin_write16(PORTGIO_MASKA_CLEAR, val)
+#define bfin_read_PORTGIO_MASKA_SET()		bfin_read16(PORTGIO_MASKA_SET)
+#define bfin_write_PORTGIO_MASKA_SET(val)	bfin_write16(PORTGIO_MASKA_SET, val)
+#define bfin_read_PORTGIO_MASKA_TOGGLE()	bfin_read16(PORTGIO_MASKA_TOGGLE)
+#define bfin_write_PORTGIO_MASKA_TOGGLE(val)	bfin_write16(PORTGIO_MASKA_TOGGLE, val)
+#define bfin_read_PORTGIO_MASKB()		bfin_read16(PORTGIO_MASKB)
+#define bfin_write_PORTGIO_MASKB(val)		bfin_write16(PORTGIO_MASKB, val)
+#define bfin_read_PORTGIO_MASKB_CLEAR()		bfin_read16(PORTGIO_MASKB_CLEAR)
+#define bfin_write_PORTGIO_MASKB_CLEAR(val)	bfin_write16(PORTGIO_MASKB_CLEAR, val)
+#define bfin_read_PORTGIO_MASKB_SET()		bfin_read16(PORTGIO_MASKB_SET)
+#define bfin_write_PORTGIO_MASKB_SET(val)	bfin_write16(PORTGIO_MASKB_SET, val)
+#define bfin_read_PORTGIO_MASKB_TOGGLE()	bfin_read16(PORTGIO_MASKB_TOGGLE)
+#define bfin_write_PORTGIO_MASKB_TOGGLE(val)	bfin_write16(PORTGIO_MASKB_TOGGLE, val)
+#define bfin_read_PORTGIO_DIR()			bfin_read16(PORTGIO_DIR)
+#define bfin_write_PORTGIO_DIR(val)		bfin_write16(PORTGIO_DIR, val)
+#define bfin_read_PORTGIO_POLAR()		bfin_read16(PORTGIO_POLAR)
+#define bfin_write_PORTGIO_POLAR(val)		bfin_write16(PORTGIO_POLAR, val)
+#define bfin_read_PORTGIO_EDGE()		bfin_read16(PORTGIO_EDGE)
+#define bfin_write_PORTGIO_EDGE(val)		bfin_write16(PORTGIO_EDGE, val)
+#define bfin_read_PORTGIO_BOTH()		bfin_read16(PORTGIO_BOTH)
+#define bfin_write_PORTGIO_BOTH(val)		bfin_write16(PORTGIO_BOTH, val)
+#define bfin_read_PORTGIO_INEN()		bfin_read16(PORTGIO_INEN)
+#define bfin_write_PORTGIO_INEN(val)		bfin_write16(PORTGIO_INEN, val)
+
+
+/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF)								*/
+#define bfin_read_PORTHIO()			bfin_read16(PORTHIO)
+#define bfin_write_PORTHIO(val)			bfin_write16(PORTHIO, val)
+#define bfin_read_PORTHIO_CLEAR()		bfin_read16(PORTHIO_CLEAR)
+#define bfin_write_PORTHIO_CLEAR(val)		bfin_write16(PORTHIO_CLEAR, val)
+#define bfin_read_PORTHIO_SET()			bfin_read16(PORTHIO_SET)
+#define bfin_write_PORTHIO_SET(val)		bfin_write16(PORTHIO_SET, val)
+#define bfin_read_PORTHIO_TOGGLE()		bfin_read16(PORTHIO_TOGGLE)
+#define bfin_write_PORTHIO_TOGGLE(val)		bfin_write16(PORTHIO_TOGGLE, val)
+#define bfin_read_PORTHIO_MASKA()		bfin_read16(PORTHIO_MASKA)
+#define bfin_write_PORTHIO_MASKA(val)		bfin_write16(PORTHIO_MASKA, val)
+#define bfin_read_PORTHIO_MASKA_CLEAR()		bfin_read16(PORTHIO_MASKA_CLEAR)
+#define bfin_write_PORTHIO_MASKA_CLEAR(val)	bfin_write16(PORTHIO_MASKA_CLEAR, val)
+#define bfin_read_PORTHIO_MASKA_SET()		bfin_read16(PORTHIO_MASKA_SET)
+#define bfin_write_PORTHIO_MASKA_SET(val)	bfin_write16(PORTHIO_MASKA_SET, val)
+#define bfin_read_PORTHIO_MASKA_TOGGLE()	bfin_read16(PORTHIO_MASKA_TOGGLE)
+#define bfin_write_PORTHIO_MASKA_TOGGLE(val)	bfin_write16(PORTHIO_MASKA_TOGGLE, val)
+#define bfin_read_PORTHIO_MASKB()		bfin_read16(PORTHIO_MASKB)
+#define bfin_write_PORTHIO_MASKB(val)		bfin_write16(PORTHIO_MASKB, val)
+#define bfin_read_PORTHIO_MASKB_CLEAR()		bfin_read16(PORTHIO_MASKB_CLEAR)
+#define bfin_write_PORTHIO_MASKB_CLEAR(val)	bfin_write16(PORTHIO_MASKB_CLEAR, val)
+#define bfin_read_PORTHIO_MASKB_SET()		bfin_read16(PORTHIO_MASKB_SET)
+#define bfin_write_PORTHIO_MASKB_SET(val)	bfin_write16(PORTHIO_MASKB_SET, val)
+#define bfin_read_PORTHIO_MASKB_TOGGLE()	bfin_read16(PORTHIO_MASKB_TOGGLE)
+#define bfin_write_PORTHIO_MASKB_TOGGLE(val)	bfin_write16(PORTHIO_MASKB_TOGGLE, val)
+#define bfin_read_PORTHIO_DIR()			bfin_read16(PORTHIO_DIR)
+#define bfin_write_PORTHIO_DIR(val)		bfin_write16(PORTHIO_DIR, val)
+#define bfin_read_PORTHIO_POLAR()		bfin_read16(PORTHIO_POLAR)
+#define bfin_write_PORTHIO_POLAR(val)		bfin_write16(PORTHIO_POLAR, val)
+#define bfin_read_PORTHIO_EDGE()		bfin_read16(PORTHIO_EDGE)
+#define bfin_write_PORTHIO_EDGE(val)		bfin_write16(PORTHIO_EDGE, val)
+#define bfin_read_PORTHIO_BOTH()		bfin_read16(PORTHIO_BOTH)
+#define bfin_write_PORTHIO_BOTH(val)		bfin_write16(PORTHIO_BOTH, val)
+#define bfin_read_PORTHIO_INEN()		bfin_read16(PORTHIO_INEN)
+#define bfin_write_PORTHIO_INEN(val)		bfin_write16(PORTHIO_INEN, val)
+
+
+/* UART1 Controller		(0xFFC02000 - 0xFFC020FF)								*/
+#define bfin_read_UART1_THR()			bfin_read16(UART1_THR)
+#define bfin_write_UART1_THR(val)		bfin_write16(UART1_THR, val)
+#define bfin_read_UART1_RBR()			bfin_read16(UART1_RBR)
+#define bfin_write_UART1_RBR(val)		bfin_write16(UART1_RBR, val)
+#define bfin_read_UART1_DLL()			bfin_read16(UART1_DLL)
+#define bfin_write_UART1_DLL(val)		bfin_write16(UART1_DLL, val)
+#define bfin_read_UART1_IER()			bfin_read16(UART1_IER)
+#define bfin_write_UART1_IER(val)		bfin_write16(UART1_IER, val)
+#define bfin_read_UART1_DLH()			bfin_read16(UART1_DLH)
+#define bfin_write_UART1_DLH(val)		bfin_write16(UART1_DLH, val)
+#define bfin_read_UART1_IIR()			bfin_read16(UART1_IIR)
+#define bfin_write_UART1_IIR(val)		bfin_write16(UART1_IIR, val)
+#define bfin_read_UART1_LCR()			bfin_read16(UART1_LCR)
+#define bfin_write_UART1_LCR(val)		bfin_write16(UART1_LCR, val)
+#define bfin_read_UART1_MCR()			bfin_read16(UART1_MCR)
+#define bfin_write_UART1_MCR(val)		bfin_write16(UART1_MCR, val)
+#define bfin_read_UART1_LSR()			bfin_read16(UART1_LSR)
+#define bfin_write_UART1_LSR(val)		bfin_write16(UART1_LSR, val)
+#define bfin_read_UART1_MSR()			bfin_read16(UART1_MSR)
+#define bfin_write_UART1_MSR(val)		bfin_write16(UART1_MSR, val)
+#define bfin_read_UART1_SCR()			bfin_read16(UART1_SCR)
+#define bfin_write_UART1_SCR(val)		bfin_write16(UART1_SCR, val)
+#define bfin_read_UART1_GCTL()			bfin_read16(UART1_GCTL)
+#define bfin_write_UART1_GCTL(val)		bfin_write16(UART1_GCTL, val)
+
+/* Omit CAN register sets from the cdefBF534.h (CAN is not in the ADSP-BF51x processor) */
+
+/* Pin Control Registers	(0xFFC03200 - 0xFFC032FF)								*/
+#define bfin_read_PORTF_FER()			bfin_read16(PORTF_FER)
+#define bfin_write_PORTF_FER(val)		bfin_write16(PORTF_FER, val)
+#define bfin_read_PORTG_FER()			bfin_read16(PORTG_FER)
+#define bfin_write_PORTG_FER(val)		bfin_write16(PORTG_FER, val)
+#define bfin_read_PORTH_FER()			bfin_read16(PORTH_FER)
+#define bfin_write_PORTH_FER(val)		bfin_write16(PORTH_FER, val)
+#define bfin_read_PORT_MUX()			bfin_read16(PORT_MUX)
+#define bfin_write_PORT_MUX(val)		bfin_write16(PORT_MUX, val)
+
+
+/* Handshake MDMA Registers	(0xFFC03300 - 0xFFC033FF)								*/
+#define bfin_read_HMDMA0_CONTROL()		bfin_read16(HMDMA0_CONTROL)
+#define bfin_write_HMDMA0_CONTROL(val)		bfin_write16(HMDMA0_CONTROL, val)
+#define bfin_read_HMDMA0_ECINIT()		bfin_read16(HMDMA0_ECINIT)
+#define bfin_write_HMDMA0_ECINIT(val)		bfin_write16(HMDMA0_ECINIT, val)
+#define bfin_read_HMDMA0_BCINIT()		bfin_read16(HMDMA0_BCINIT)
+#define bfin_write_HMDMA0_BCINIT(val)		bfin_write16(HMDMA0_BCINIT, val)
+#define bfin_read_HMDMA0_ECURGENT()		bfin_read16(HMDMA0_ECURGENT)
+#define bfin_write_HMDMA0_ECURGENT(val)		bfin_write16(HMDMA0_ECURGENT, val)
+#define bfin_read_HMDMA0_ECOVERFLOW()		bfin_read16(HMDMA0_ECOVERFLOW)
+#define bfin_write_HMDMA0_ECOVERFLOW(val)	bfin_write16(HMDMA0_ECOVERFLOW, val)
+#define bfin_read_HMDMA0_ECOUNT()		bfin_read16(HMDMA0_ECOUNT)
+#define bfin_write_HMDMA0_ECOUNT(val)		bfin_write16(HMDMA0_ECOUNT, val)
+#define bfin_read_HMDMA0_BCOUNT()		bfin_read16(HMDMA0_BCOUNT)
+#define bfin_write_HMDMA0_BCOUNT(val)		bfin_write16(HMDMA0_BCOUNT, val)
+
+#define bfin_read_HMDMA1_CONTROL()		bfin_read16(HMDMA1_CONTROL)
+#define bfin_write_HMDMA1_CONTROL(val)		bfin_write16(HMDMA1_CONTROL, val)
+#define bfin_read_HMDMA1_ECINIT()		bfin_read16(HMDMA1_ECINIT)
+#define bfin_write_HMDMA1_ECINIT(val)		bfin_write16(HMDMA1_ECINIT, val)
+#define bfin_read_HMDMA1_BCINIT()		bfin_read16(HMDMA1_BCINIT)
+#define bfin_write_HMDMA1_BCINIT(val)		bfin_write16(HMDMA1_BCINIT, val)
+#define bfin_read_HMDMA1_ECURGENT()		bfin_read16(HMDMA1_ECURGENT)
+#define bfin_write_HMDMA1_ECURGENT(val)		bfin_write16(HMDMA1_ECURGENT, val)
+#define bfin_read_HMDMA1_ECOVERFLOW()		bfin_read16(HMDMA1_ECOVERFLOW)
+#define bfin_write_HMDMA1_ECOVERFLOW(val)	bfin_write16(HMDMA1_ECOVERFLOW, val)
+#define bfin_read_HMDMA1_ECOUNT()		bfin_read16(HMDMA1_ECOUNT)
+#define bfin_write_HMDMA1_ECOUNT(val)		bfin_write16(HMDMA1_ECOUNT, val)
+#define bfin_read_HMDMA1_BCOUNT()		bfin_read16(HMDMA1_BCOUNT)
+#define bfin_write_HMDMA1_BCOUNT(val)		bfin_write16(HMDMA1_BCOUNT, val)
+
+/* ==== end from cdefBF534.h ==== */
+
+/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
+
+#define bfin_read_PORTF_MUX()			bfin_read16(PORTF_MUX)
+#define bfin_write_PORTF_MUX(val)		bfin_write16(PORTF_MUX, val)
+#define bfin_read_PORTG_MUX()			bfin_read16(PORTG_MUX)
+#define bfin_write_PORTG_MUX(val)		bfin_write16(PORTG_MUX, val)
+#define bfin_read_PORTH_MUX()			bfin_read16(PORTH_MUX)
+#define bfin_write_PORTH_MUX(val)		bfin_write16(PORTH_MUX, val)
+
+#define bfin_read_PORTF_DRIVE()			bfin_read16(PORTF_DRIVE)
+#define bfin_write_PORTF_DRIVE(val)		bfin_write16(PORTF_DRIVE, val)
+#define bfin_read_PORTG_DRIVE()			bfin_read16(PORTG_DRIVE)
+#define bfin_write_PORTG_DRIVE(val)		bfin_write16(PORTG_DRIVE, val)
+#define bfin_read_PORTH_DRIVE()			bfin_read16(PORTH_DRIVE)
+#define bfin_write_PORTH_DRIVE(val)		bfin_write16(PORTH_DRIVE, val)
+#define bfin_read_PORTF_SLEW()			bfin_read16(PORTF_SLEW)
+#define bfin_write_PORTF_SLEW(val)		bfin_write16(PORTF_SLEW, val)
+#define bfin_read_PORTG_SLEW()			bfin_read16(PORTG_SLEW)
+#define bfin_write_PORTG_SLEW(val)		bfin_write16(PORTG_SLEW, val)
+#define bfin_read_PORTH_SLEW()			bfin_read16(PORTH_SLEW)
+#define bfin_write_PORTH_SLEW(val)		bfin_write16(PORTH_SLEW, val)
+#define bfin_read_PORTF_HYSTERESIS()		bfin_read16(PORTF_HYSTERESIS)
+#define bfin_write_PORTF_HYSTERESIS(val)	bfin_write16(PORTF_HYSTERESIS, val)
+#define bfin_read_PORTG_HYSTERESIS()		bfin_read16(PORTG_HYSTERESIS)
+#define bfin_write_PORTG_HYSTERESIS(val)	bfin_write16(PORTG_HYSTERESIS, val)
+#define bfin_read_PORTH_HYSTERESIS()		bfin_read16(PORTH_HYSTERESIS)
+#define bfin_write_PORTH_HYSTERESIS(val)	bfin_write16(PORTH_HYSTERESIS, val)
+#define bfin_read_MISCPORT_DRIVE()		bfin_read16(MISCPORT_DRIVE)
+#define bfin_write_MISCPORT_DRIVE(val)		bfin_write16(MISCPORT_DRIVE, val)
+#define bfin_read_MISCPORT_SLEW()		bfin_read16(MISCPORT_SLEW)
+#define bfin_write_MISCPORT_SLEW(val)		bfin_write16(MISCPORT_SLEW, val)
+#define bfin_read_MISCPORT_HYSTERESIS()		bfin_read16(MISCPORT_HYSTERESIS)
+#define bfin_write_MISCPORT_HYSTERESIS(val)	bfin_write16(MISCPORT_HYSTERESIS, val)
+
+/* HOST Port Registers */
+
+#define bfin_read_HOST_CONTROL()		bfin_read16(HOST_CONTROL)
+#define bfin_write_HOST_CONTROL(val)		bfin_write16(HOST_CONTROL, val)
+#define bfin_read_HOST_STATUS()			bfin_read16(HOST_STATUS)
+#define bfin_write_HOST_STATUS(val)		bfin_write16(HOST_STATUS, val)
+#define bfin_read_HOST_TIMEOUT()		bfin_read16(HOST_TIMEOUT)
+#define bfin_write_HOST_TIMEOUT(val)		bfin_write16(HOST_TIMEOUT, val)
+
+/* Counter Registers */
+
+#define bfin_read_CNT_CONFIG()			bfin_read16(CNT_CONFIG)
+#define bfin_write_CNT_CONFIG(val)		bfin_write16(CNT_CONFIG, val)
+#define bfin_read_CNT_IMASK()			bfin_read16(CNT_IMASK)
+#define bfin_write_CNT_IMASK(val)		bfin_write16(CNT_IMASK, val)
+#define bfin_read_CNT_STATUS()			bfin_read16(CNT_STATUS)
+#define bfin_write_CNT_STATUS(val)		bfin_write16(CNT_STATUS, val)
+#define bfin_read_CNT_COMMAND()			bfin_read16(CNT_COMMAND)
+#define bfin_write_CNT_COMMAND(val)		bfin_write16(CNT_COMMAND, val)
+#define bfin_read_CNT_DEBOUNCE()		bfin_read16(CNT_DEBOUNCE)
+#define bfin_write_CNT_DEBOUNCE(val)		bfin_write16(CNT_DEBOUNCE, val)
+#define bfin_read_CNT_COUNTER()			bfin_read32(CNT_COUNTER)
+#define bfin_write_CNT_COUNTER(val)		bfin_write32(CNT_COUNTER, val)
+#define bfin_read_CNT_MAX()			bfin_read32(CNT_MAX)
+#define bfin_write_CNT_MAX(val)			bfin_write32(CNT_MAX, val)
+#define bfin_read_CNT_MIN()			bfin_read32(CNT_MIN)
+#define bfin_write_CNT_MIN(val)			bfin_write32(CNT_MIN, val)
+
+/* Security Registers */
+
+#define bfin_read_SECURE_SYSSWT()		bfin_read32(SECURE_SYSSWT)
+#define bfin_write_SECURE_SYSSWT(val)		bfin_write32(SECURE_SYSSWT, val)
+#define bfin_read_SECURE_CONTROL()		bfin_read16(SECURE_CONTROL)
+#define bfin_write_SECURE_CONTROL(val)		bfin_write16(SECURE_CONTROL, val)
+#define bfin_read_SECURE_STATUS()		bfin_read16(SECURE_STATUS)
+#define bfin_write_SECURE_STATUS(val)		bfin_write16(SECURE_STATUS, val)
+
+#endif /* _CDEF_BF512_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/cdefBF514.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
new file mode 100644
index 0000000..861221d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2008-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _CDEF_BF514_H
+#define _CDEF_BF514_H
+
+/* BF514 is BF512 + RSI */
+#include "cdefBF512.h"
+
+/* Removable Storage Interface Registers */
+
+#define bfin_read_RSI_PWR_CTL()        bfin_read16(RSI_PWR_CONTROL)
+#define bfin_write_RSI_PWR_CTL(val)    bfin_write16(RSI_PWR_CONTROL, val)
+#define bfin_read_RSI_CLK_CTL()	       bfin_read16(RSI_CLK_CONTROL)
+#define bfin_write_RSI_CLK_CTL(val)    bfin_write16(RSI_CLK_CONTROL, val)
+#define bfin_read_RSI_ARGUMENT()       bfin_read32(RSI_ARGUMENT)
+#define bfin_write_RSI_ARGUMENT(val)   bfin_write32(RSI_ARGUMENT, val)
+#define bfin_read_RSI_COMMAND()        bfin_read16(RSI_COMMAND)
+#define bfin_write_RSI_COMMAND(val)    bfin_write16(RSI_COMMAND, val)
+#define bfin_read_RSI_RESP_CMD()       bfin_read16(RSI_RESP_CMD)
+#define bfin_write_RSI_RESP_CMD(val)   bfin_write16(RSI_RESP_CMD, val)
+#define bfin_read_RSI_RESPONSE0()      bfin_read32(RSI_RESPONSE0)
+#define bfin_write_RSI_RESPONSE0(val)  bfin_write32(RSI_RESPONSE0, val)
+#define bfin_read_RSI_RESPONSE1()      bfin_read32(RSI_RESPONSE1)
+#define bfin_write_RSI_RESPONSE1(val)  bfin_write32(RSI_RESPONSE1, val)
+#define bfin_read_RSI_RESPONSE2()      bfin_read32(RSI_RESPONSE2)
+#define bfin_write_RSI_RESPONSE2(val)  bfin_write32(RSI_RESPONSE2, val)
+#define bfin_read_RSI_RESPONSE3()      bfin_read32(RSI_RESPONSE3)
+#define bfin_write_RSI_RESPONSE3(val)  bfin_write32(RSI_RESPONSE3, val)
+#define bfin_read_RSI_DATA_TIMER()     bfin_read32(RSI_DATA_TIMER)
+#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val)
+#define bfin_read_RSI_DATA_LGTH()      bfin_read16(RSI_DATA_LGTH)
+#define bfin_write_RSI_DATA_LGTH(val)  bfin_write16(RSI_DATA_LGTH, val)
+#define bfin_read_RSI_DATA_CTL()       bfin_read16(RSI_DATA_CONTROL)
+#define bfin_write_RSI_DATA_CTL(val)   bfin_write16(RSI_DATA_CONTROL, val)
+#define bfin_read_RSI_DATA_CNT()       bfin_read16(RSI_DATA_CNT)
+#define bfin_write_RSI_DATA_CNT(val)   bfin_write16(RSI_DATA_CNT, val)
+#define bfin_read_RSI_STATUS()         bfin_read32(RSI_STATUS)
+#define bfin_write_RSI_STATUS(val)     bfin_write32(RSI_STATUS, val)
+#define bfin_read_RSI_STATUS_CLR()     bfin_read16(RSI_STATUSCL)
+#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val)
+#define bfin_read_RSI_MASK0()          bfin_read32(RSI_MASK0)
+#define bfin_write_RSI_MASK0(val)      bfin_write32(RSI_MASK0, val)
+#define bfin_read_RSI_MASK1()          bfin_read32(RSI_MASK1)
+#define bfin_write_RSI_MASK1(val)      bfin_write32(RSI_MASK1, val)
+#define bfin_read_RSI_FIFO_CNT()       bfin_read16(RSI_FIFO_CNT)
+#define bfin_write_RSI_FIFO_CNT(val)   bfin_write16(RSI_FIFO_CNT, val)
+#define bfin_read_RSI_CEATA_CTL()      bfin_read16(RSI_CEATA_CONTROL)
+#define bfin_write_RSI_CEATA_CTL(val)  bfin_write16(RSI_CEATA_CONTROL, val)
+#define bfin_read_RSI_FIFO()           bfin_read32(RSI_FIFO)
+#define bfin_write_RSI_FIFO(val)       bfin_write32(RSI_FIFO, val)
+#define bfin_read_RSI_E_STATUS()       bfin_read16(RSI_ESTAT)
+#define bfin_write_RSI_E_STATUS(val)   bfin_write16(RSI_ESTAT, val)
+#define bfin_read_RSI_E_MASK()         bfin_read16(RSI_EMASK)
+#define bfin_write_RSI_E_MASK(val)     bfin_write16(RSI_EMASK, val)
+#define bfin_read_RSI_CFG()            bfin_read16(RSI_CONFIG)
+#define bfin_write_RSI_CFG(val)        bfin_write16(RSI_CONFIG, val)
+#define bfin_read_RSI_RD_WAIT_EN()     bfin_read16(RSI_RD_WAIT_EN)
+#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val)
+#define bfin_read_RSI_PID0()           bfin_read16(RSI_PID0)
+#define bfin_write_RSI_PID0(val)       bfin_write16(RSI_PID0, val)
+#define bfin_read_RSI_PID1()           bfin_read16(RSI_PID1)
+#define bfin_write_RSI_PID1(val)       bfin_write16(RSI_PID1, val)
+#define bfin_read_RSI_PID2()           bfin_read16(RSI_PID2)
+#define bfin_write_RSI_PID2(val)       bfin_write16(RSI_PID2, val)
+#define bfin_read_RSI_PID3()           bfin_read16(RSI_PID3)
+#define bfin_write_RSI_PID3(val)       bfin_write16(RSI_PID3, val)
+#define bfin_read_RSI_PID4()           bfin_read16(RSI_PID4)
+#define bfin_write_RSI_PID4(val)       bfin_write16(RSI_PID4, val)
+#define bfin_read_RSI_PID5()           bfin_read16(RSI_PID5)
+#define bfin_write_RSI_PID5(val)       bfin_write16(RSI_PID5, val)
+#define bfin_read_RSI_PID6()           bfin_read16(RSI_PID6)
+#define bfin_write_RSI_PID6(val)       bfin_write16(RSI_PID6, val)
+#define bfin_read_RSI_PID7()           bfin_read16(RSI_PID7)
+#define bfin_write_RSI_PID7(val)       bfin_write16(RSI_PID7, val)
+
+#endif /* _CDEF_BF514_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/cdefBF516.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
new file mode 100644
index 0000000..cc9bf0d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2008-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _CDEF_BF516_H
+#define _CDEF_BF516_H
+
+/* BF516 is BF514 + EMAC */
+#include "cdefBF514.h"
+
+/* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF) */
+
+#define bfin_read_EMAC_OPMODE()			bfin_read32(EMAC_OPMODE)
+#define bfin_write_EMAC_OPMODE(val)		bfin_write32(EMAC_OPMODE, val)
+#define bfin_read_EMAC_ADDRLO()			bfin_read32(EMAC_ADDRLO)
+#define bfin_write_EMAC_ADDRLO(val)		bfin_write32(EMAC_ADDRLO, val)
+#define bfin_read_EMAC_ADDRHI()			bfin_read32(EMAC_ADDRHI)
+#define bfin_write_EMAC_ADDRHI(val)		bfin_write32(EMAC_ADDRHI, val)
+#define bfin_read_EMAC_HASHLO()			bfin_read32(EMAC_HASHLO)
+#define bfin_write_EMAC_HASHLO(val)		bfin_write32(EMAC_HASHLO, val)
+#define bfin_read_EMAC_HASHHI()			bfin_read32(EMAC_HASHHI)
+#define bfin_write_EMAC_HASHHI(val)		bfin_write32(EMAC_HASHHI, val)
+#define bfin_read_EMAC_STAADD()			bfin_read32(EMAC_STAADD)
+#define bfin_write_EMAC_STAADD(val)		bfin_write32(EMAC_STAADD, val)
+#define bfin_read_EMAC_STADAT()			bfin_read32(EMAC_STADAT)
+#define bfin_write_EMAC_STADAT(val)		bfin_write32(EMAC_STADAT, val)
+#define bfin_read_EMAC_FLC()			bfin_read32(EMAC_FLC)
+#define bfin_write_EMAC_FLC(val)		bfin_write32(EMAC_FLC, val)
+#define bfin_read_EMAC_VLAN1()			bfin_read32(EMAC_VLAN1)
+#define bfin_write_EMAC_VLAN1(val)		bfin_write32(EMAC_VLAN1, val)
+#define bfin_read_EMAC_VLAN2()			bfin_read32(EMAC_VLAN2)
+#define bfin_write_EMAC_VLAN2(val)		bfin_write32(EMAC_VLAN2, val)
+#define bfin_read_EMAC_WKUP_CTL()		bfin_read32(EMAC_WKUP_CTL)
+#define bfin_write_EMAC_WKUP_CTL(val)		bfin_write32(EMAC_WKUP_CTL, val)
+#define bfin_read_EMAC_WKUP_FFMSK0()		bfin_read32(EMAC_WKUP_FFMSK0)
+#define bfin_write_EMAC_WKUP_FFMSK0(val)	bfin_write32(EMAC_WKUP_FFMSK0, val)
+#define bfin_read_EMAC_WKUP_FFMSK1()		bfin_read32(EMAC_WKUP_FFMSK1)
+#define bfin_write_EMAC_WKUP_FFMSK1(val)	bfin_write32(EMAC_WKUP_FFMSK1, val)
+#define bfin_read_EMAC_WKUP_FFMSK2()		bfin_read32(EMAC_WKUP_FFMSK2)
+#define bfin_write_EMAC_WKUP_FFMSK2(val)	bfin_write32(EMAC_WKUP_FFMSK2, val)
+#define bfin_read_EMAC_WKUP_FFMSK3()		bfin_read32(EMAC_WKUP_FFMSK3)
+#define bfin_write_EMAC_WKUP_FFMSK3(val)	bfin_write32(EMAC_WKUP_FFMSK3, val)
+#define bfin_read_EMAC_WKUP_FFCMD()		bfin_read32(EMAC_WKUP_FFCMD)
+#define bfin_write_EMAC_WKUP_FFCMD(val)		bfin_write32(EMAC_WKUP_FFCMD, val)
+#define bfin_read_EMAC_WKUP_FFOFF()		bfin_read32(EMAC_WKUP_FFOFF)
+#define bfin_write_EMAC_WKUP_FFOFF(val)		bfin_write32(EMAC_WKUP_FFOFF, val)
+#define bfin_read_EMAC_WKUP_FFCRC0()		bfin_read32(EMAC_WKUP_FFCRC0)
+#define bfin_write_EMAC_WKUP_FFCRC0(val)	bfin_write32(EMAC_WKUP_FFCRC0, val)
+#define bfin_read_EMAC_WKUP_FFCRC1()		bfin_read32(EMAC_WKUP_FFCRC1)
+#define bfin_write_EMAC_WKUP_FFCRC1(val)	bfin_write32(EMAC_WKUP_FFCRC1, val)
+
+#define bfin_read_EMAC_SYSCTL()			bfin_read32(EMAC_SYSCTL)
+#define bfin_write_EMAC_SYSCTL(val)		bfin_write32(EMAC_SYSCTL, val)
+#define bfin_read_EMAC_SYSTAT()			bfin_read32(EMAC_SYSTAT)
+#define bfin_write_EMAC_SYSTAT(val)		bfin_write32(EMAC_SYSTAT, val)
+#define bfin_read_EMAC_RX_STAT()		bfin_read32(EMAC_RX_STAT)
+#define bfin_write_EMAC_RX_STAT(val)		bfin_write32(EMAC_RX_STAT, val)
+#define bfin_read_EMAC_RX_STKY()		bfin_read32(EMAC_RX_STKY)
+#define bfin_write_EMAC_RX_STKY(val)		bfin_write32(EMAC_RX_STKY, val)
+#define bfin_read_EMAC_RX_IRQE()		bfin_read32(EMAC_RX_IRQE)
+#define bfin_write_EMAC_RX_IRQE(val)		bfin_write32(EMAC_RX_IRQE, val)
+#define bfin_read_EMAC_TX_STAT()		bfin_read32(EMAC_TX_STAT)
+#define bfin_write_EMAC_TX_STAT(val)		bfin_write32(EMAC_TX_STAT, val)
+#define bfin_read_EMAC_TX_STKY()		bfin_read32(EMAC_TX_STKY)
+#define bfin_write_EMAC_TX_STKY(val)		bfin_write32(EMAC_TX_STKY, val)
+#define bfin_read_EMAC_TX_IRQE()		bfin_read32(EMAC_TX_IRQE)
+#define bfin_write_EMAC_TX_IRQE(val)		bfin_write32(EMAC_TX_IRQE, val)
+
+#define bfin_read_EMAC_MMC_CTL()		bfin_read32(EMAC_MMC_CTL)
+#define bfin_write_EMAC_MMC_CTL(val)		bfin_write32(EMAC_MMC_CTL, val)
+#define bfin_read_EMAC_MMC_RIRQS()		bfin_read32(EMAC_MMC_RIRQS)
+#define bfin_write_EMAC_MMC_RIRQS(val)		bfin_write32(EMAC_MMC_RIRQS, val)
+#define bfin_read_EMAC_MMC_RIRQE()		bfin_read32(EMAC_MMC_RIRQE)
+#define bfin_write_EMAC_MMC_RIRQE(val)		bfin_write32(EMAC_MMC_RIRQE, val)
+#define bfin_read_EMAC_MMC_TIRQS()		bfin_read32(EMAC_MMC_TIRQS)
+#define bfin_write_EMAC_MMC_TIRQS(val)		bfin_write32(EMAC_MMC_TIRQS, val)
+#define bfin_read_EMAC_MMC_TIRQE()		bfin_read32(EMAC_MMC_TIRQE)
+#define bfin_write_EMAC_MMC_TIRQE(val)		bfin_write32(EMAC_MMC_TIRQE, val)
+
+#define bfin_read_EMAC_RXC_OK()			bfin_read32(EMAC_RXC_OK)
+#define bfin_write_EMAC_RXC_OK(val)		bfin_write32(EMAC_RXC_OK, val)
+#define bfin_read_EMAC_RXC_FCS()		bfin_read32(EMAC_RXC_FCS)
+#define bfin_write_EMAC_RXC_FCS(val)		bfin_write32(EMAC_RXC_FCS, val)
+#define bfin_read_EMAC_RXC_ALIGN()		bfin_read32(EMAC_RXC_ALIGN)
+#define bfin_write_EMAC_RXC_ALIGN(val)		bfin_write32(EMAC_RXC_ALIGN, val)
+#define bfin_read_EMAC_RXC_OCTET()		bfin_read32(EMAC_RXC_OCTET)
+#define bfin_write_EMAC_RXC_OCTET(val)		bfin_write32(EMAC_RXC_OCTET, val)
+#define bfin_read_EMAC_RXC_DMAOVF()		bfin_read32(EMAC_RXC_DMAOVF)
+#define bfin_write_EMAC_RXC_DMAOVF(val)		bfin_write32(EMAC_RXC_DMAOVF, val)
+#define bfin_read_EMAC_RXC_UNICST()		bfin_read32(EMAC_RXC_UNICST)
+#define bfin_write_EMAC_RXC_UNICST(val)		bfin_write32(EMAC_RXC_UNICST, val)
+#define bfin_read_EMAC_RXC_MULTI()		bfin_read32(EMAC_RXC_MULTI)
+#define bfin_write_EMAC_RXC_MULTI(val)		bfin_write32(EMAC_RXC_MULTI, val)
+#define bfin_read_EMAC_RXC_BROAD()		bfin_read32(EMAC_RXC_BROAD)
+#define bfin_write_EMAC_RXC_BROAD(val)		bfin_write32(EMAC_RXC_BROAD, val)
+#define bfin_read_EMAC_RXC_LNERRI()		bfin_read32(EMAC_RXC_LNERRI)
+#define bfin_write_EMAC_RXC_LNERRI(val)		bfin_write32(EMAC_RXC_LNERRI, val)
+#define bfin_read_EMAC_RXC_LNERRO()		bfin_read32(EMAC_RXC_LNERRO)
+#define bfin_write_EMAC_RXC_LNERRO(val)		bfin_write32(EMAC_RXC_LNERRO, val)
+#define bfin_read_EMAC_RXC_LONG()		bfin_read32(EMAC_RXC_LONG)
+#define bfin_write_EMAC_RXC_LONG(val)		bfin_write32(EMAC_RXC_LONG, val)
+#define bfin_read_EMAC_RXC_MACCTL()		bfin_read32(EMAC_RXC_MACCTL)
+#define bfin_write_EMAC_RXC_MACCTL(val)		bfin_write32(EMAC_RXC_MACCTL, val)
+#define bfin_read_EMAC_RXC_OPCODE()		bfin_read32(EMAC_RXC_OPCODE)
+#define bfin_write_EMAC_RXC_OPCODE(val)		bfin_write32(EMAC_RXC_OPCODE, val)
+#define bfin_read_EMAC_RXC_PAUSE()		bfin_read32(EMAC_RXC_PAUSE)
+#define bfin_write_EMAC_RXC_PAUSE(val)		bfin_write32(EMAC_RXC_PAUSE, val)
+#define bfin_read_EMAC_RXC_ALLFRM()		bfin_read32(EMAC_RXC_ALLFRM)
+#define bfin_write_EMAC_RXC_ALLFRM(val)		bfin_write32(EMAC_RXC_ALLFRM, val)
+#define bfin_read_EMAC_RXC_ALLOCT()		bfin_read32(EMAC_RXC_ALLOCT)
+#define bfin_write_EMAC_RXC_ALLOCT(val)		bfin_write32(EMAC_RXC_ALLOCT, val)
+#define bfin_read_EMAC_RXC_TYPED()		bfin_read32(EMAC_RXC_TYPED)
+#define bfin_write_EMAC_RXC_TYPED(val)		bfin_write32(EMAC_RXC_TYPED, val)
+#define bfin_read_EMAC_RXC_SHORT()		bfin_read32(EMAC_RXC_SHORT)
+#define bfin_write_EMAC_RXC_SHORT(val)		bfin_write32(EMAC_RXC_SHORT, val)
+#define bfin_read_EMAC_RXC_EQ64()		bfin_read32(EMAC_RXC_EQ64)
+#define bfin_write_EMAC_RXC_EQ64(val)		bfin_write32(EMAC_RXC_EQ64, val)
+#define bfin_read_EMAC_RXC_LT128()		bfin_read32(EMAC_RXC_LT128)
+#define bfin_write_EMAC_RXC_LT128(val)		bfin_write32(EMAC_RXC_LT128, val)
+#define bfin_read_EMAC_RXC_LT256()		bfin_read32(EMAC_RXC_LT256)
+#define bfin_write_EMAC_RXC_LT256(val)		bfin_write32(EMAC_RXC_LT256, val)
+#define bfin_read_EMAC_RXC_LT512()		bfin_read32(EMAC_RXC_LT512)
+#define bfin_write_EMAC_RXC_LT512(val)		bfin_write32(EMAC_RXC_LT512, val)
+#define bfin_read_EMAC_RXC_LT1024()		bfin_read32(EMAC_RXC_LT1024)
+#define bfin_write_EMAC_RXC_LT1024(val)		bfin_write32(EMAC_RXC_LT1024, val)
+#define bfin_read_EMAC_RXC_GE1024()		bfin_read32(EMAC_RXC_GE1024)
+#define bfin_write_EMAC_RXC_GE1024(val)		bfin_write32(EMAC_RXC_GE1024, val)
+
+#define bfin_read_EMAC_TXC_OK()			bfin_read32(EMAC_TXC_OK)
+#define bfin_write_EMAC_TXC_OK(val)		bfin_write32(EMAC_TXC_OK, val)
+#define bfin_read_EMAC_TXC_1COL()		bfin_read32(EMAC_TXC_1COL)
+#define bfin_write_EMAC_TXC_1COL(val)		bfin_write32(EMAC_TXC_1COL, val)
+#define bfin_read_EMAC_TXC_GT1COL()		bfin_read32(EMAC_TXC_GT1COL)
+#define bfin_write_EMAC_TXC_GT1COL(val)		bfin_write32(EMAC_TXC_GT1COL, val)
+#define bfin_read_EMAC_TXC_OCTET()		bfin_read32(EMAC_TXC_OCTET)
+#define bfin_write_EMAC_TXC_OCTET(val)		bfin_write32(EMAC_TXC_OCTET, val)
+#define bfin_read_EMAC_TXC_DEFER()		bfin_read32(EMAC_TXC_DEFER)
+#define bfin_write_EMAC_TXC_DEFER(val)		bfin_write32(EMAC_TXC_DEFER, val)
+#define bfin_read_EMAC_TXC_LATECL()		bfin_read32(EMAC_TXC_LATECL)
+#define bfin_write_EMAC_TXC_LATECL(val)		bfin_write32(EMAC_TXC_LATECL, val)
+#define bfin_read_EMAC_TXC_XS_COL()		bfin_read32(EMAC_TXC_XS_COL)
+#define bfin_write_EMAC_TXC_XS_COL(val)		bfin_write32(EMAC_TXC_XS_COL, val)
+#define bfin_read_EMAC_TXC_DMAUND()		bfin_read32(EMAC_TXC_DMAUND)
+#define bfin_write_EMAC_TXC_DMAUND(val)		bfin_write32(EMAC_TXC_DMAUND, val)
+#define bfin_read_EMAC_TXC_CRSERR()		bfin_read32(EMAC_TXC_CRSERR)
+#define bfin_write_EMAC_TXC_CRSERR(val)		bfin_write32(EMAC_TXC_CRSERR, val)
+#define bfin_read_EMAC_TXC_UNICST()		bfin_read32(EMAC_TXC_UNICST)
+#define bfin_write_EMAC_TXC_UNICST(val)		bfin_write32(EMAC_TXC_UNICST, val)
+#define bfin_read_EMAC_TXC_MULTI()		bfin_read32(EMAC_TXC_MULTI)
+#define bfin_write_EMAC_TXC_MULTI(val)		bfin_write32(EMAC_TXC_MULTI, val)
+#define bfin_read_EMAC_TXC_BROAD()		bfin_read32(EMAC_TXC_BROAD)
+#define bfin_write_EMAC_TXC_BROAD(val)		bfin_write32(EMAC_TXC_BROAD, val)
+#define bfin_read_EMAC_TXC_XS_DFR()		bfin_read32(EMAC_TXC_XS_DFR)
+#define bfin_write_EMAC_TXC_XS_DFR(val)		bfin_write32(EMAC_TXC_XS_DFR, val)
+#define bfin_read_EMAC_TXC_MACCTL()		bfin_read32(EMAC_TXC_MACCTL)
+#define bfin_write_EMAC_TXC_MACCTL(val)		bfin_write32(EMAC_TXC_MACCTL, val)
+#define bfin_read_EMAC_TXC_ALLFRM()		bfin_read32(EMAC_TXC_ALLFRM)
+#define bfin_write_EMAC_TXC_ALLFRM(val)		bfin_write32(EMAC_TXC_ALLFRM, val)
+#define bfin_read_EMAC_TXC_ALLOCT()		bfin_read32(EMAC_TXC_ALLOCT)
+#define bfin_write_EMAC_TXC_ALLOCT(val)		bfin_write32(EMAC_TXC_ALLOCT, val)
+#define bfin_read_EMAC_TXC_EQ64()		bfin_read32(EMAC_TXC_EQ64)
+#define bfin_write_EMAC_TXC_EQ64(val)		bfin_write32(EMAC_TXC_EQ64, val)
+#define bfin_read_EMAC_TXC_LT128()		bfin_read32(EMAC_TXC_LT128)
+#define bfin_write_EMAC_TXC_LT128(val)		bfin_write32(EMAC_TXC_LT128, val)
+#define bfin_read_EMAC_TXC_LT256()		bfin_read32(EMAC_TXC_LT256)
+#define bfin_write_EMAC_TXC_LT256(val)		bfin_write32(EMAC_TXC_LT256, val)
+#define bfin_read_EMAC_TXC_LT512()		bfin_read32(EMAC_TXC_LT512)
+#define bfin_write_EMAC_TXC_LT512(val)		bfin_write32(EMAC_TXC_LT512, val)
+#define bfin_read_EMAC_TXC_LT1024()		bfin_read32(EMAC_TXC_LT1024)
+#define bfin_write_EMAC_TXC_LT1024(val)		bfin_write32(EMAC_TXC_LT1024, val)
+#define bfin_read_EMAC_TXC_GE1024()		bfin_read32(EMAC_TXC_GE1024)
+#define bfin_write_EMAC_TXC_GE1024(val)		bfin_write32(EMAC_TXC_GE1024, val)
+#define bfin_read_EMAC_TXC_ABORT()		bfin_read32(EMAC_TXC_ABORT)
+#define bfin_write_EMAC_TXC_ABORT(val)		bfin_write32(EMAC_TXC_ABORT, val)
+
+#endif /* _CDEF_BF516_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/cdefBF518.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/cdefBF518.h
new file mode 100644
index 0000000..96a82fd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/cdefBF518.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2008-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _CDEF_BF518_H
+#define _CDEF_BF518_H
+
+/* BF518 is BF516 + IEEE-1588 */
+#include "cdefBF516.h"
+
+/* PTP TSYNC Registers */
+
+#define bfin_read_EMAC_PTP_CTL()                bfin_read16(EMAC_PTP_CTL)
+#define bfin_write_EMAC_PTP_CTL(val)            bfin_write16(EMAC_PTP_CTL, val)
+#define bfin_read_EMAC_PTP_IE()                 bfin_read16(EMAC_PTP_IE)
+#define bfin_write_EMAC_PTP_IE(val)             bfin_write16(EMAC_PTP_IE, val)
+#define bfin_read_EMAC_PTP_ISTAT()              bfin_read16(EMAC_PTP_ISTAT)
+#define bfin_write_EMAC_PTP_ISTAT(val)          bfin_write16(EMAC_PTP_ISTAT, val)
+#define bfin_read_EMAC_PTP_FOFF()               bfin_read32(EMAC_PTP_FOFF)
+#define bfin_write_EMAC_PTP_FOFF(val)           bfin_write32(EMAC_PTP_FOFF, val)
+#define bfin_read_EMAC_PTP_FV1()                bfin_read32(EMAC_PTP_FV1)
+#define bfin_write_EMAC_PTP_FV1(val)            bfin_write32(EMAC_PTP_FV1, val)
+#define bfin_read_EMAC_PTP_FV2()                bfin_read32(EMAC_PTP_FV2)
+#define bfin_write_EMAC_PTP_FV2(val)            bfin_write32(EMAC_PTP_FV2, val)
+#define bfin_read_EMAC_PTP_FV3()                bfin_read32(EMAC_PTP_FV3)
+#define bfin_write_EMAC_PTP_FV3(val)            bfin_write32(EMAC_PTP_FV3, val)
+#define bfin_read_EMAC_PTP_ADDEND()             bfin_read32(EMAC_PTP_ADDEND)
+#define bfin_write_EMAC_PTP_ADDEND(val)         bfin_write32(EMAC_PTP_ADDEND, val)
+#define bfin_read_EMAC_PTP_ACCR()               bfin_read32(EMAC_PTP_ACCR)
+#define bfin_write_EMAC_PTP_ACCR(val)           bfin_write32(EMAC_PTP_ACCR, val)
+#define bfin_read_EMAC_PTP_OFFSET()             bfin_read32(EMAC_PTP_OFFSET)
+#define bfin_write_EMAC_PTP_OFFSET(val)         bfin_write32(EMAC_PTP_OFFSET, val)
+#define bfin_read_EMAC_PTP_TIMELO()             bfin_read32(EMAC_PTP_TIMELO)
+#define bfin_write_EMAC_PTP_TIMELO(val)         bfin_write32(EMAC_PTP_TIMELO, val)
+#define bfin_read_EMAC_PTP_TIMEHI()             bfin_read32(EMAC_PTP_TIMEHI)
+#define bfin_write_EMAC_PTP_TIMEHI(val)         bfin_write32(EMAC_PTP_TIMEHI, val)
+#define bfin_read_EMAC_PTP_RXSNAPLO()           bfin_read32(EMAC_PTP_RXSNAPLO)
+#define bfin_read_EMAC_PTP_RXSNAPHI()           bfin_read32(EMAC_PTP_RXSNAPHI)
+#define bfin_read_EMAC_PTP_TXSNAPLO()           bfin_read32(EMAC_PTP_TXSNAPLO)
+#define bfin_read_EMAC_PTP_TXSNAPHI()           bfin_read32(EMAC_PTP_TXSNAPHI)
+#define bfin_read_EMAC_PTP_ALARMLO()            bfin_read32(EMAC_PTP_ALARMLO)
+#define bfin_write_EMAC_PTP_ALARMLO(val)        bfin_write32(EMAC_PTP_ALARMLO, val)
+#define bfin_read_EMAC_PTP_ALARMHI()            bfin_read32(EMAC_PTP_ALARMHI)
+#define bfin_write_EMAC_PTP_ALARMHI(val)        bfin_write32(EMAC_PTP_ALARMHI, val)
+#define bfin_read_EMAC_PTP_ID_OFF()             bfin_read16(EMAC_PTP_ID_OFF)
+#define bfin_write_EMAC_PTP_ID_OFF(val)         bfin_write16(EMAC_PTP_ID_OFF, val)
+#define bfin_read_EMAC_PTP_ID_SNAP()            bfin_read32(EMAC_PTP_ID_SNAP)
+#define bfin_write_EMAC_PTP_ID_SNAP(val)        bfin_write32(EMAC_PTP_ID_SNAP, val)
+#define bfin_read_EMAC_PTP_PPS_STARTHI()        bfin_read32(EMAC_PTP_PPS_STARTHI)
+#define bfin_write_EMAC_PTP_PPS_STARTHI(val)    bfin_write32(EMAC_PTP_PPS_STARTHI, val)
+#define bfin_read_EMAC_PTP_PPS_PERIOD()         bfin_read32(EMAC_PTP_PPS_PERIOD)
+#define bfin_write_EMAC_PTP_PPS_PERIOD(val)     bfin_write32(EMAC_PTP_PPS_PERIOD, val)
+
+#endif /* _CDEF_BF518_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/defBF512.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/defBF512.h
new file mode 100644
index 0000000..e6a017f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/defBF512.h
@@ -0,0 +1,1304 @@
+/*
+ * Copyright 2008-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF512_H
+#define _DEF_BF512_H
+
+/* ************************************************************** */
+/*   SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF51x    */
+/* ************************************************************** */
+
+/* Clock and System Control	(0xFFC00000 - 0xFFC000FF)								*/
+#define PLL_CTL				0xFFC00000	/* PLL Control Register						*/
+#define PLL_DIV				0xFFC00004	/* PLL Divide Register						*/
+#define VR_CTL				0xFFC00008	/* Voltage Regulator Control Register				*/
+#define PLL_STAT			0xFFC0000C	/* PLL Status Register						*/
+#define PLL_LOCKCNT			0xFFC00010	/* PLL Lock Count Register					*/
+#define CHIPID				0xFFC00014	/* Device ID Register */
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF)								*/
+#define SWRST				0xFFC00100	/* Software Reset Register					*/
+#define SYSCR				0xFFC00104	/* System Configuration Register				*/
+#define SIC_RVECT			0xFFC00108	/* Interrupt Reset Vector Address Register			*/
+
+#define SIC_IMASK0			0xFFC0010C	/* Interrupt Mask Register					*/
+#define SIC_IAR0			0xFFC00110	/* Interrupt Assignment Register 0				*/
+#define SIC_IAR1			0xFFC00114	/* Interrupt Assignment Register 1				*/
+#define SIC_IAR2			0xFFC00118	/* Interrupt Assignment Register 2				*/
+#define SIC_IAR3			0xFFC0011C	/* Interrupt Assignment Register 3				*/
+#define SIC_ISR0			0xFFC00120	/* Interrupt Status Register					*/
+#define SIC_IWR0			0xFFC00124	/* Interrupt Wakeup Register					*/
+
+/* SIC Additions to ADSP-BF51x (0xFFC0014C - 0xFFC00162) */
+#define SIC_IMASK1                      0xFFC0014C     /* Interrupt Mask register of SIC2 */
+#define SIC_IAR4                        0xFFC00150     /* Interrupt Assignment register4 */
+#define SIC_IAR5                        0xFFC00154     /* Interrupt Assignment register5 */
+#define SIC_IAR6                        0xFFC00158     /* Interrupt Assignment register6 */
+#define SIC_IAR7                        0xFFC0015C     /* Interrupt Assignment register7 */
+#define SIC_ISR1                        0xFFC00160     /* Interrupt Statur register */
+#define SIC_IWR1                        0xFFC00164     /* Interrupt Wakeup register */
+
+
+/* Watchdog Timer			(0xFFC00200 - 0xFFC002FF)								*/
+#define WDOG_CTL			0xFFC00200	/* Watchdog Control Register				*/
+#define WDOG_CNT			0xFFC00204	/* Watchdog Count Register					*/
+#define WDOG_STAT			0xFFC00208	/* Watchdog Status Register					*/
+
+
+/* Real Time Clock		(0xFFC00300 - 0xFFC003FF)									*/
+#define RTC_STAT			0xFFC00300	/* RTC Status Register						*/
+#define RTC_ICTL			0xFFC00304	/* RTC Interrupt Control Register			*/
+#define RTC_ISTAT			0xFFC00308	/* RTC Interrupt Status Register			*/
+#define RTC_SWCNT			0xFFC0030C	/* RTC Stopwatch Count Register				*/
+#define RTC_ALARM			0xFFC00310	/* RTC Alarm Time Register					*/
+#define RTC_FAST			0xFFC00314	/* RTC Prescaler Enable Register			*/
+#define RTC_PREN			0xFFC00314	/* RTC Prescaler Enable Alternate Macro		*/
+
+
+/* UART0 Controller		(0xFFC00400 - 0xFFC004FF)									*/
+#define UART0_THR			0xFFC00400	/* Transmit Holding register				*/
+#define UART0_RBR			0xFFC00400	/* Receive Buffer register					*/
+#define UART0_DLL			0xFFC00400	/* Divisor Latch (Low-Byte)					*/
+#define UART0_IER			0xFFC00404	/* Interrupt Enable Register				*/
+#define UART0_DLH			0xFFC00404	/* Divisor Latch (High-Byte)				*/
+#define UART0_IIR			0xFFC00408	/* Interrupt Identification Register		*/
+#define UART0_LCR			0xFFC0040C	/* Line Control Register					*/
+#define UART0_MCR			0xFFC00410	/* Modem Control Register					*/
+#define UART0_LSR			0xFFC00414	/* Line Status Register						*/
+#define UART0_MSR			0xFFC00418	/* Modem Status Register					*/
+#define UART0_SCR			0xFFC0041C	/* SCR Scratch Register						*/
+#define UART0_GCTL			0xFFC00424	/* Global Control Register					*/
+
+/* SPI0 Controller			(0xFFC00500 - 0xFFC005FF)							*/
+#define SPI0_REGBASE			0xFFC00500
+#define SPI0_CTL			0xFFC00500	/* SPI Control Register						*/
+#define SPI0_FLG			0xFFC00504	/* SPI Flag register						*/
+#define SPI0_STAT			0xFFC00508	/* SPI Status register						*/
+#define SPI0_TDBR			0xFFC0050C	/* SPI Transmit Data Buffer Register				*/
+#define SPI0_RDBR			0xFFC00510	/* SPI Receive Data Buffer Register				*/
+#define SPI0_BAUD			0xFFC00514	/* SPI Baud rate Register					*/
+#define SPI0_SHADOW			0xFFC00518	/* SPI_RDBR Shadow Register					*/
+
+/* SPI1 Controller			(0xFFC03400 - 0xFFC034FF)							*/
+#define SPI1_REGBASE			0xFFC03400
+#define SPI1_CTL			0xFFC03400	/* SPI Control Register						*/
+#define SPI1_FLG			0xFFC03404	/* SPI Flag register						*/
+#define SPI1_STAT			0xFFC03408	/* SPI Status register						*/
+#define SPI1_TDBR			0xFFC0340C	/* SPI Transmit Data Buffer Register				*/
+#define SPI1_RDBR			0xFFC03410	/* SPI Receive Data Buffer Register				*/
+#define SPI1_BAUD			0xFFC03414	/* SPI Baud rate Register					*/
+#define SPI1_SHADOW			0xFFC03418	/* SPI_RDBR Shadow Register					*/
+
+/* TIMER0-7 Registers		(0xFFC00600 - 0xFFC006FF)								*/
+#define TIMER0_CONFIG		0xFFC00600	/* Timer 0 Configuration Register			*/
+#define TIMER0_COUNTER		0xFFC00604	/* Timer 0 Counter Register					*/
+#define TIMER0_PERIOD		0xFFC00608	/* Timer 0 Period Register					*/
+#define TIMER0_WIDTH		0xFFC0060C	/* Timer 0 Width Register					*/
+
+#define TIMER1_CONFIG		0xFFC00610	/* Timer 1 Configuration Register  			*/
+#define TIMER1_COUNTER		0xFFC00614	/* Timer 1 Counter Register        			*/
+#define TIMER1_PERIOD		0xFFC00618	/* Timer 1 Period Register         			*/
+#define TIMER1_WIDTH		0xFFC0061C	/* Timer 1 Width Register          			*/
+
+#define TIMER2_CONFIG		0xFFC00620	/* Timer 2 Configuration Register  			*/
+#define TIMER2_COUNTER		0xFFC00624	/* Timer 2 Counter Register        			*/
+#define TIMER2_PERIOD		0xFFC00628	/* Timer 2 Period Register         			*/
+#define TIMER2_WIDTH		0xFFC0062C	/* Timer 2 Width Register          			*/
+
+#define TIMER3_CONFIG		0xFFC00630	/* Timer 3 Configuration Register			*/
+#define TIMER3_COUNTER		0xFFC00634	/* Timer 3 Counter Register					*/
+#define TIMER3_PERIOD		0xFFC00638	/* Timer 3 Period Register					*/
+#define TIMER3_WIDTH		0xFFC0063C	/* Timer 3 Width Register					*/
+
+#define TIMER4_CONFIG		0xFFC00640	/* Timer 4 Configuration Register  			*/
+#define TIMER4_COUNTER		0xFFC00644	/* Timer 4 Counter Register        			*/
+#define TIMER4_PERIOD		0xFFC00648	/* Timer 4 Period Register         			*/
+#define TIMER4_WIDTH		0xFFC0064C	/* Timer 4 Width Register          			*/
+
+#define TIMER5_CONFIG		0xFFC00650	/* Timer 5 Configuration Register  			*/
+#define TIMER5_COUNTER		0xFFC00654	/* Timer 5 Counter Register        			*/
+#define TIMER5_PERIOD		0xFFC00658	/* Timer 5 Period Register         			*/
+#define TIMER5_WIDTH		0xFFC0065C	/* Timer 5 Width Register          			*/
+
+#define TIMER6_CONFIG		0xFFC00660	/* Timer 6 Configuration Register  			*/
+#define TIMER6_COUNTER		0xFFC00664	/* Timer 6 Counter Register        			*/
+#define TIMER6_PERIOD		0xFFC00668	/* Timer 6 Period Register         			*/
+#define TIMER6_WIDTH		0xFFC0066C	/* Timer 6 Width Register          			*/
+
+#define TIMER7_CONFIG		0xFFC00670	/* Timer 7 Configuration Register  			*/
+#define TIMER7_COUNTER		0xFFC00674	/* Timer 7 Counter Register        			*/
+#define TIMER7_PERIOD		0xFFC00678	/* Timer 7 Period Register         			*/
+#define TIMER7_WIDTH		0xFFC0067C	/* Timer 7 Width Register       			*/
+
+#define TIMER_ENABLE		0xFFC00680	/* Timer Enable Register					*/
+#define TIMER_DISABLE		0xFFC00684	/* Timer Disable Register					*/
+#define TIMER_STATUS		0xFFC00688	/* Timer Status Register					*/
+
+/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF)												*/
+#define PORTFIO					0xFFC00700	/* Port F I/O Pin State Specify Register				*/
+#define PORTFIO_CLEAR			0xFFC00704	/* Port F I/O Peripheral Interrupt Clear Register		*/
+#define PORTFIO_SET				0xFFC00708	/* Port F I/O Peripheral Interrupt Set Register			*/
+#define PORTFIO_TOGGLE			0xFFC0070C	/* Port F I/O Pin State Toggle Register					*/
+#define PORTFIO_MASKA			0xFFC00710	/* Port F I/O Mask State Specify Interrupt A Register	*/
+#define PORTFIO_MASKA_CLEAR		0xFFC00714	/* Port F I/O Mask Disable Interrupt A Register			*/
+#define PORTFIO_MASKA_SET		0xFFC00718	/* Port F I/O Mask Enable Interrupt A Register			*/
+#define PORTFIO_MASKA_TOGGLE	0xFFC0071C	/* Port F I/O Mask Toggle Enable Interrupt A Register	*/
+#define PORTFIO_MASKB			0xFFC00720	/* Port F I/O Mask State Specify Interrupt B Register	*/
+#define PORTFIO_MASKB_CLEAR		0xFFC00724	/* Port F I/O Mask Disable Interrupt B Register			*/
+#define PORTFIO_MASKB_SET		0xFFC00728	/* Port F I/O Mask Enable Interrupt B Register			*/
+#define PORTFIO_MASKB_TOGGLE	0xFFC0072C	/* Port F I/O Mask Toggle Enable Interrupt B Register	*/
+#define PORTFIO_DIR				0xFFC00730	/* Port F I/O Direction Register						*/
+#define PORTFIO_POLAR			0xFFC00734	/* Port F I/O Source Polarity Register					*/
+#define PORTFIO_EDGE			0xFFC00738	/* Port F I/O Source Sensitivity Register				*/
+#define PORTFIO_BOTH			0xFFC0073C	/* Port F I/O Set on BOTH Edges Register				*/
+#define PORTFIO_INEN			0xFFC00740	/* Port F I/O Input Enable Register 					*/
+
+/* SPORT0 Controller		(0xFFC00800 - 0xFFC008FF)										*/
+#define SPORT0_TCR1			0xFFC00800	/* SPORT0 Transmit Configuration 1 Register			*/
+#define SPORT0_TCR2			0xFFC00804	/* SPORT0 Transmit Configuration 2 Register			*/
+#define SPORT0_TCLKDIV		0xFFC00808	/* SPORT0 Transmit Clock Divider					*/
+#define SPORT0_TFSDIV		0xFFC0080C	/* SPORT0 Transmit Frame Sync Divider				*/
+#define SPORT0_TX			0xFFC00810	/* SPORT0 TX Data Register							*/
+#define SPORT0_RX			0xFFC00818	/* SPORT0 RX Data Register							*/
+#define SPORT0_RCR1			0xFFC00820	/* SPORT0 Transmit Configuration 1 Register			*/
+#define SPORT0_RCR2			0xFFC00824	/* SPORT0 Transmit Configuration 2 Register			*/
+#define SPORT0_RCLKDIV		0xFFC00828	/* SPORT0 Receive Clock Divider						*/
+#define SPORT0_RFSDIV		0xFFC0082C	/* SPORT0 Receive Frame Sync Divider				*/
+#define SPORT0_STAT			0xFFC00830	/* SPORT0 Status Register							*/
+#define SPORT0_CHNL			0xFFC00834	/* SPORT0 Current Channel Register					*/
+#define SPORT0_MCMC1		0xFFC00838	/* SPORT0 Multi-Channel Configuration Register 1	*/
+#define SPORT0_MCMC2		0xFFC0083C	/* SPORT0 Multi-Channel Configuration Register 2	*/
+#define SPORT0_MTCS0		0xFFC00840	/* SPORT0 Multi-Channel Transmit Select Register 0	*/
+#define SPORT0_MTCS1		0xFFC00844	/* SPORT0 Multi-Channel Transmit Select Register 1	*/
+#define SPORT0_MTCS2		0xFFC00848	/* SPORT0 Multi-Channel Transmit Select Register 2	*/
+#define SPORT0_MTCS3		0xFFC0084C	/* SPORT0 Multi-Channel Transmit Select Register 3	*/
+#define SPORT0_MRCS0		0xFFC00850	/* SPORT0 Multi-Channel Receive Select Register 0	*/
+#define SPORT0_MRCS1		0xFFC00854	/* SPORT0 Multi-Channel Receive Select Register 1	*/
+#define SPORT0_MRCS2		0xFFC00858	/* SPORT0 Multi-Channel Receive Select Register 2	*/
+#define SPORT0_MRCS3		0xFFC0085C	/* SPORT0 Multi-Channel Receive Select Register 3	*/
+
+/* SPORT1 Controller		(0xFFC00900 - 0xFFC009FF)										*/
+#define SPORT1_TCR1			0xFFC00900	/* SPORT1 Transmit Configuration 1 Register			*/
+#define SPORT1_TCR2			0xFFC00904	/* SPORT1 Transmit Configuration 2 Register			*/
+#define SPORT1_TCLKDIV		0xFFC00908	/* SPORT1 Transmit Clock Divider					*/
+#define SPORT1_TFSDIV		0xFFC0090C	/* SPORT1 Transmit Frame Sync Divider				*/
+#define SPORT1_TX			0xFFC00910	/* SPORT1 TX Data Register							*/
+#define SPORT1_RX			0xFFC00918	/* SPORT1 RX Data Register							*/
+#define SPORT1_RCR1			0xFFC00920	/* SPORT1 Transmit Configuration 1 Register			*/
+#define SPORT1_RCR2			0xFFC00924	/* SPORT1 Transmit Configuration 2 Register			*/
+#define SPORT1_RCLKDIV		0xFFC00928	/* SPORT1 Receive Clock Divider						*/
+#define SPORT1_RFSDIV		0xFFC0092C	/* SPORT1 Receive Frame Sync Divider				*/
+#define SPORT1_STAT			0xFFC00930	/* SPORT1 Status Register							*/
+#define SPORT1_CHNL			0xFFC00934	/* SPORT1 Current Channel Register					*/
+#define SPORT1_MCMC1		0xFFC00938	/* SPORT1 Multi-Channel Configuration Register 1	*/
+#define SPORT1_MCMC2		0xFFC0093C	/* SPORT1 Multi-Channel Configuration Register 2	*/
+#define SPORT1_MTCS0		0xFFC00940	/* SPORT1 Multi-Channel Transmit Select Register 0	*/
+#define SPORT1_MTCS1		0xFFC00944	/* SPORT1 Multi-Channel Transmit Select Register 1	*/
+#define SPORT1_MTCS2		0xFFC00948	/* SPORT1 Multi-Channel Transmit Select Register 2	*/
+#define SPORT1_MTCS3		0xFFC0094C	/* SPORT1 Multi-Channel Transmit Select Register 3	*/
+#define SPORT1_MRCS0		0xFFC00950	/* SPORT1 Multi-Channel Receive Select Register 0	*/
+#define SPORT1_MRCS1		0xFFC00954	/* SPORT1 Multi-Channel Receive Select Register 1	*/
+#define SPORT1_MRCS2		0xFFC00958	/* SPORT1 Multi-Channel Receive Select Register 2	*/
+#define SPORT1_MRCS3		0xFFC0095C	/* SPORT1 Multi-Channel Receive Select Register 3	*/
+
+/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF)								*/
+#define EBIU_AMGCTL			0xFFC00A00	/* Asynchronous Memory Global Control Register	*/
+#define EBIU_AMBCTL0		0xFFC00A04	/* Asynchronous Memory Bank Control Register 0	*/
+#define EBIU_AMBCTL1		0xFFC00A08	/* Asynchronous Memory Bank Control Register 1	*/
+#define EBIU_SDGCTL			0xFFC00A10	/* SDRAM Global Control Register				*/
+#define EBIU_SDBCTL			0xFFC00A14	/* SDRAM Bank Control Register					*/
+#define EBIU_SDRRC			0xFFC00A18	/* SDRAM Refresh Rate Control Register			*/
+#define EBIU_SDSTAT			0xFFC00A1C	/* SDRAM Status Register						*/
+
+/* DMA Traffic Control Registers													*/
+#define DMAC_TC_PER			0xFFC00B0C	/* Traffic Control Periods Register			*/
+#define DMAC_TC_CNT			0xFFC00B10	/* Traffic Control Current Counts Register	*/
+
+/* DMA Controller (0xFFC00C00 - 0xFFC00FFF)															*/
+#define DMA0_NEXT_DESC_PTR		0xFFC00C00	/* DMA Channel 0 Next Descriptor Pointer Register		*/
+#define DMA0_START_ADDR			0xFFC00C04	/* DMA Channel 0 Start Address Register					*/
+#define DMA0_CONFIG				0xFFC00C08	/* DMA Channel 0 Configuration Register					*/
+#define DMA0_X_COUNT			0xFFC00C10	/* DMA Channel 0 X Count Register						*/
+#define DMA0_X_MODIFY			0xFFC00C14	/* DMA Channel 0 X Modify Register						*/
+#define DMA0_Y_COUNT			0xFFC00C18	/* DMA Channel 0 Y Count Register						*/
+#define DMA0_Y_MODIFY			0xFFC00C1C	/* DMA Channel 0 Y Modify Register						*/
+#define DMA0_CURR_DESC_PTR		0xFFC00C20	/* DMA Channel 0 Current Descriptor Pointer Register	*/
+#define DMA0_CURR_ADDR			0xFFC00C24	/* DMA Channel 0 Current Address Register				*/
+#define DMA0_IRQ_STATUS			0xFFC00C28	/* DMA Channel 0 Interrupt/Status Register				*/
+#define DMA0_PERIPHERAL_MAP		0xFFC00C2C	/* DMA Channel 0 Peripheral Map Register				*/
+#define DMA0_CURR_X_COUNT		0xFFC00C30	/* DMA Channel 0 Current X Count Register				*/
+#define DMA0_CURR_Y_COUNT		0xFFC00C38	/* DMA Channel 0 Current Y Count Register				*/
+
+#define DMA1_NEXT_DESC_PTR		0xFFC00C40	/* DMA Channel 1 Next Descriptor Pointer Register		*/
+#define DMA1_START_ADDR			0xFFC00C44	/* DMA Channel 1 Start Address Register					*/
+#define DMA1_CONFIG				0xFFC00C48	/* DMA Channel 1 Configuration Register					*/
+#define DMA1_X_COUNT			0xFFC00C50	/* DMA Channel 1 X Count Register						*/
+#define DMA1_X_MODIFY			0xFFC00C54	/* DMA Channel 1 X Modify Register						*/
+#define DMA1_Y_COUNT			0xFFC00C58	/* DMA Channel 1 Y Count Register						*/
+#define DMA1_Y_MODIFY			0xFFC00C5C	/* DMA Channel 1 Y Modify Register						*/
+#define DMA1_CURR_DESC_PTR		0xFFC00C60	/* DMA Channel 1 Current Descriptor Pointer Register	*/
+#define DMA1_CURR_ADDR			0xFFC00C64	/* DMA Channel 1 Current Address Register				*/
+#define DMA1_IRQ_STATUS			0xFFC00C68	/* DMA Channel 1 Interrupt/Status Register				*/
+#define DMA1_PERIPHERAL_MAP		0xFFC00C6C	/* DMA Channel 1 Peripheral Map Register				*/
+#define DMA1_CURR_X_COUNT		0xFFC00C70	/* DMA Channel 1 Current X Count Register				*/
+#define DMA1_CURR_Y_COUNT		0xFFC00C78	/* DMA Channel 1 Current Y Count Register				*/
+
+#define DMA2_NEXT_DESC_PTR		0xFFC00C80	/* DMA Channel 2 Next Descriptor Pointer Register		*/
+#define DMA2_START_ADDR			0xFFC00C84	/* DMA Channel 2 Start Address Register					*/
+#define DMA2_CONFIG				0xFFC00C88	/* DMA Channel 2 Configuration Register					*/
+#define DMA2_X_COUNT			0xFFC00C90	/* DMA Channel 2 X Count Register						*/
+#define DMA2_X_MODIFY			0xFFC00C94	/* DMA Channel 2 X Modify Register						*/
+#define DMA2_Y_COUNT			0xFFC00C98	/* DMA Channel 2 Y Count Register						*/
+#define DMA2_Y_MODIFY			0xFFC00C9C	/* DMA Channel 2 Y Modify Register						*/
+#define DMA2_CURR_DESC_PTR		0xFFC00CA0	/* DMA Channel 2 Current Descriptor Pointer Register	*/
+#define DMA2_CURR_ADDR			0xFFC00CA4	/* DMA Channel 2 Current Address Register				*/
+#define DMA2_IRQ_STATUS			0xFFC00CA8	/* DMA Channel 2 Interrupt/Status Register				*/
+#define DMA2_PERIPHERAL_MAP		0xFFC00CAC	/* DMA Channel 2 Peripheral Map Register				*/
+#define DMA2_CURR_X_COUNT		0xFFC00CB0	/* DMA Channel 2 Current X Count Register				*/
+#define DMA2_CURR_Y_COUNT		0xFFC00CB8	/* DMA Channel 2 Current Y Count Register				*/
+
+#define DMA3_NEXT_DESC_PTR		0xFFC00CC0	/* DMA Channel 3 Next Descriptor Pointer Register		*/
+#define DMA3_START_ADDR			0xFFC00CC4	/* DMA Channel 3 Start Address Register					*/
+#define DMA3_CONFIG				0xFFC00CC8	/* DMA Channel 3 Configuration Register					*/
+#define DMA3_X_COUNT			0xFFC00CD0	/* DMA Channel 3 X Count Register						*/
+#define DMA3_X_MODIFY			0xFFC00CD4	/* DMA Channel 3 X Modify Register						*/
+#define DMA3_Y_COUNT			0xFFC00CD8	/* DMA Channel 3 Y Count Register						*/
+#define DMA3_Y_MODIFY			0xFFC00CDC	/* DMA Channel 3 Y Modify Register						*/
+#define DMA3_CURR_DESC_PTR		0xFFC00CE0	/* DMA Channel 3 Current Descriptor Pointer Register	*/
+#define DMA3_CURR_ADDR			0xFFC00CE4	/* DMA Channel 3 Current Address Register				*/
+#define DMA3_IRQ_STATUS			0xFFC00CE8	/* DMA Channel 3 Interrupt/Status Register				*/
+#define DMA3_PERIPHERAL_MAP		0xFFC00CEC	/* DMA Channel 3 Peripheral Map Register				*/
+#define DMA3_CURR_X_COUNT		0xFFC00CF0	/* DMA Channel 3 Current X Count Register				*/
+#define DMA3_CURR_Y_COUNT		0xFFC00CF8	/* DMA Channel 3 Current Y Count Register				*/
+
+#define DMA4_NEXT_DESC_PTR		0xFFC00D00	/* DMA Channel 4 Next Descriptor Pointer Register		*/
+#define DMA4_START_ADDR			0xFFC00D04	/* DMA Channel 4 Start Address Register					*/
+#define DMA4_CONFIG				0xFFC00D08	/* DMA Channel 4 Configuration Register					*/
+#define DMA4_X_COUNT			0xFFC00D10	/* DMA Channel 4 X Count Register						*/
+#define DMA4_X_MODIFY			0xFFC00D14	/* DMA Channel 4 X Modify Register						*/
+#define DMA4_Y_COUNT			0xFFC00D18	/* DMA Channel 4 Y Count Register						*/
+#define DMA4_Y_MODIFY			0xFFC00D1C	/* DMA Channel 4 Y Modify Register						*/
+#define DMA4_CURR_DESC_PTR		0xFFC00D20	/* DMA Channel 4 Current Descriptor Pointer Register	*/
+#define DMA4_CURR_ADDR			0xFFC00D24	/* DMA Channel 4 Current Address Register				*/
+#define DMA4_IRQ_STATUS			0xFFC00D28	/* DMA Channel 4 Interrupt/Status Register				*/
+#define DMA4_PERIPHERAL_MAP		0xFFC00D2C	/* DMA Channel 4 Peripheral Map Register				*/
+#define DMA4_CURR_X_COUNT		0xFFC00D30	/* DMA Channel 4 Current X Count Register				*/
+#define DMA4_CURR_Y_COUNT		0xFFC00D38	/* DMA Channel 4 Current Y Count Register				*/
+
+#define DMA5_NEXT_DESC_PTR		0xFFC00D40	/* DMA Channel 5 Next Descriptor Pointer Register		*/
+#define DMA5_START_ADDR			0xFFC00D44	/* DMA Channel 5 Start Address Register					*/
+#define DMA5_CONFIG				0xFFC00D48	/* DMA Channel 5 Configuration Register					*/
+#define DMA5_X_COUNT			0xFFC00D50	/* DMA Channel 5 X Count Register						*/
+#define DMA5_X_MODIFY			0xFFC00D54	/* DMA Channel 5 X Modify Register						*/
+#define DMA5_Y_COUNT			0xFFC00D58	/* DMA Channel 5 Y Count Register						*/
+#define DMA5_Y_MODIFY			0xFFC00D5C	/* DMA Channel 5 Y Modify Register						*/
+#define DMA5_CURR_DESC_PTR		0xFFC00D60	/* DMA Channel 5 Current Descriptor Pointer Register	*/
+#define DMA5_CURR_ADDR			0xFFC00D64	/* DMA Channel 5 Current Address Register				*/
+#define DMA5_IRQ_STATUS			0xFFC00D68	/* DMA Channel 5 Interrupt/Status Register				*/
+#define DMA5_PERIPHERAL_MAP		0xFFC00D6C	/* DMA Channel 5 Peripheral Map Register				*/
+#define DMA5_CURR_X_COUNT		0xFFC00D70	/* DMA Channel 5 Current X Count Register				*/
+#define DMA5_CURR_Y_COUNT		0xFFC00D78	/* DMA Channel 5 Current Y Count Register				*/
+
+#define DMA6_NEXT_DESC_PTR		0xFFC00D80	/* DMA Channel 6 Next Descriptor Pointer Register		*/
+#define DMA6_START_ADDR			0xFFC00D84	/* DMA Channel 6 Start Address Register					*/
+#define DMA6_CONFIG				0xFFC00D88	/* DMA Channel 6 Configuration Register					*/
+#define DMA6_X_COUNT			0xFFC00D90	/* DMA Channel 6 X Count Register						*/
+#define DMA6_X_MODIFY			0xFFC00D94	/* DMA Channel 6 X Modify Register						*/
+#define DMA6_Y_COUNT			0xFFC00D98	/* DMA Channel 6 Y Count Register						*/
+#define DMA6_Y_MODIFY			0xFFC00D9C	/* DMA Channel 6 Y Modify Register						*/
+#define DMA6_CURR_DESC_PTR		0xFFC00DA0	/* DMA Channel 6 Current Descriptor Pointer Register	*/
+#define DMA6_CURR_ADDR			0xFFC00DA4	/* DMA Channel 6 Current Address Register				*/
+#define DMA6_IRQ_STATUS			0xFFC00DA8	/* DMA Channel 6 Interrupt/Status Register				*/
+#define DMA6_PERIPHERAL_MAP		0xFFC00DAC	/* DMA Channel 6 Peripheral Map Register				*/
+#define DMA6_CURR_X_COUNT		0xFFC00DB0	/* DMA Channel 6 Current X Count Register				*/
+#define DMA6_CURR_Y_COUNT		0xFFC00DB8	/* DMA Channel 6 Current Y Count Register				*/
+
+#define DMA7_NEXT_DESC_PTR		0xFFC00DC0	/* DMA Channel 7 Next Descriptor Pointer Register		*/
+#define DMA7_START_ADDR			0xFFC00DC4	/* DMA Channel 7 Start Address Register					*/
+#define DMA7_CONFIG				0xFFC00DC8	/* DMA Channel 7 Configuration Register					*/
+#define DMA7_X_COUNT			0xFFC00DD0	/* DMA Channel 7 X Count Register						*/
+#define DMA7_X_MODIFY			0xFFC00DD4	/* DMA Channel 7 X Modify Register						*/
+#define DMA7_Y_COUNT			0xFFC00DD8	/* DMA Channel 7 Y Count Register						*/
+#define DMA7_Y_MODIFY			0xFFC00DDC	/* DMA Channel 7 Y Modify Register						*/
+#define DMA7_CURR_DESC_PTR		0xFFC00DE0	/* DMA Channel 7 Current Descriptor Pointer Register	*/
+#define DMA7_CURR_ADDR			0xFFC00DE4	/* DMA Channel 7 Current Address Register				*/
+#define DMA7_IRQ_STATUS			0xFFC00DE8	/* DMA Channel 7 Interrupt/Status Register				*/
+#define DMA7_PERIPHERAL_MAP		0xFFC00DEC	/* DMA Channel 7 Peripheral Map Register				*/
+#define DMA7_CURR_X_COUNT		0xFFC00DF0	/* DMA Channel 7 Current X Count Register				*/
+#define DMA7_CURR_Y_COUNT		0xFFC00DF8	/* DMA Channel 7 Current Y Count Register				*/
+
+#define DMA8_NEXT_DESC_PTR		0xFFC00E00	/* DMA Channel 8 Next Descriptor Pointer Register		*/
+#define DMA8_START_ADDR			0xFFC00E04	/* DMA Channel 8 Start Address Register					*/
+#define DMA8_CONFIG				0xFFC00E08	/* DMA Channel 8 Configuration Register					*/
+#define DMA8_X_COUNT			0xFFC00E10	/* DMA Channel 8 X Count Register						*/
+#define DMA8_X_MODIFY			0xFFC00E14	/* DMA Channel 8 X Modify Register						*/
+#define DMA8_Y_COUNT			0xFFC00E18	/* DMA Channel 8 Y Count Register						*/
+#define DMA8_Y_MODIFY			0xFFC00E1C	/* DMA Channel 8 Y Modify Register						*/
+#define DMA8_CURR_DESC_PTR		0xFFC00E20	/* DMA Channel 8 Current Descriptor Pointer Register	*/
+#define DMA8_CURR_ADDR			0xFFC00E24	/* DMA Channel 8 Current Address Register				*/
+#define DMA8_IRQ_STATUS			0xFFC00E28	/* DMA Channel 8 Interrupt/Status Register				*/
+#define DMA8_PERIPHERAL_MAP		0xFFC00E2C	/* DMA Channel 8 Peripheral Map Register				*/
+#define DMA8_CURR_X_COUNT		0xFFC00E30	/* DMA Channel 8 Current X Count Register				*/
+#define DMA8_CURR_Y_COUNT		0xFFC00E38	/* DMA Channel 8 Current Y Count Register				*/
+
+#define DMA9_NEXT_DESC_PTR		0xFFC00E40	/* DMA Channel 9 Next Descriptor Pointer Register		*/
+#define DMA9_START_ADDR			0xFFC00E44	/* DMA Channel 9 Start Address Register					*/
+#define DMA9_CONFIG				0xFFC00E48	/* DMA Channel 9 Configuration Register					*/
+#define DMA9_X_COUNT			0xFFC00E50	/* DMA Channel 9 X Count Register						*/
+#define DMA9_X_MODIFY			0xFFC00E54	/* DMA Channel 9 X Modify Register						*/
+#define DMA9_Y_COUNT			0xFFC00E58	/* DMA Channel 9 Y Count Register						*/
+#define DMA9_Y_MODIFY			0xFFC00E5C	/* DMA Channel 9 Y Modify Register						*/
+#define DMA9_CURR_DESC_PTR		0xFFC00E60	/* DMA Channel 9 Current Descriptor Pointer Register	*/
+#define DMA9_CURR_ADDR			0xFFC00E64	/* DMA Channel 9 Current Address Register				*/
+#define DMA9_IRQ_STATUS			0xFFC00E68	/* DMA Channel 9 Interrupt/Status Register				*/
+#define DMA9_PERIPHERAL_MAP		0xFFC00E6C	/* DMA Channel 9 Peripheral Map Register				*/
+#define DMA9_CURR_X_COUNT		0xFFC00E70	/* DMA Channel 9 Current X Count Register				*/
+#define DMA9_CURR_Y_COUNT		0xFFC00E78	/* DMA Channel 9 Current Y Count Register				*/
+
+#define DMA10_NEXT_DESC_PTR		0xFFC00E80	/* DMA Channel 10 Next Descriptor Pointer Register		*/
+#define DMA10_START_ADDR		0xFFC00E84	/* DMA Channel 10 Start Address Register				*/
+#define DMA10_CONFIG			0xFFC00E88	/* DMA Channel 10 Configuration Register				*/
+#define DMA10_X_COUNT			0xFFC00E90	/* DMA Channel 10 X Count Register						*/
+#define DMA10_X_MODIFY			0xFFC00E94	/* DMA Channel 10 X Modify Register						*/
+#define DMA10_Y_COUNT			0xFFC00E98	/* DMA Channel 10 Y Count Register						*/
+#define DMA10_Y_MODIFY			0xFFC00E9C	/* DMA Channel 10 Y Modify Register						*/
+#define DMA10_CURR_DESC_PTR		0xFFC00EA0	/* DMA Channel 10 Current Descriptor Pointer Register	*/
+#define DMA10_CURR_ADDR			0xFFC00EA4	/* DMA Channel 10 Current Address Register				*/
+#define DMA10_IRQ_STATUS		0xFFC00EA8	/* DMA Channel 10 Interrupt/Status Register				*/
+#define DMA10_PERIPHERAL_MAP	0xFFC00EAC	/* DMA Channel 10 Peripheral Map Register				*/
+#define DMA10_CURR_X_COUNT		0xFFC00EB0	/* DMA Channel 10 Current X Count Register				*/
+#define DMA10_CURR_Y_COUNT		0xFFC00EB8	/* DMA Channel 10 Current Y Count Register				*/
+
+#define DMA11_NEXT_DESC_PTR		0xFFC00EC0	/* DMA Channel 11 Next Descriptor Pointer Register		*/
+#define DMA11_START_ADDR		0xFFC00EC4	/* DMA Channel 11 Start Address Register				*/
+#define DMA11_CONFIG			0xFFC00EC8	/* DMA Channel 11 Configuration Register				*/
+#define DMA11_X_COUNT			0xFFC00ED0	/* DMA Channel 11 X Count Register						*/
+#define DMA11_X_MODIFY			0xFFC00ED4	/* DMA Channel 11 X Modify Register						*/
+#define DMA11_Y_COUNT			0xFFC00ED8	/* DMA Channel 11 Y Count Register						*/
+#define DMA11_Y_MODIFY			0xFFC00EDC	/* DMA Channel 11 Y Modify Register						*/
+#define DMA11_CURR_DESC_PTR		0xFFC00EE0	/* DMA Channel 11 Current Descriptor Pointer Register	*/
+#define DMA11_CURR_ADDR			0xFFC00EE4	/* DMA Channel 11 Current Address Register				*/
+#define DMA11_IRQ_STATUS		0xFFC00EE8	/* DMA Channel 11 Interrupt/Status Register				*/
+#define DMA11_PERIPHERAL_MAP	0xFFC00EEC	/* DMA Channel 11 Peripheral Map Register				*/
+#define DMA11_CURR_X_COUNT		0xFFC00EF0	/* DMA Channel 11 Current X Count Register				*/
+#define DMA11_CURR_Y_COUNT		0xFFC00EF8	/* DMA Channel 11 Current Y Count Register				*/
+
+#define MDMA_D0_NEXT_DESC_PTR	0xFFC00F00	/* MemDMA Stream 0 Destination Next Descriptor Pointer Register		*/
+#define MDMA_D0_START_ADDR		0xFFC00F04	/* MemDMA Stream 0 Destination Start Address Register				*/
+#define MDMA_D0_CONFIG			0xFFC00F08	/* MemDMA Stream 0 Destination Configuration Register				*/
+#define MDMA_D0_X_COUNT			0xFFC00F10	/* MemDMA Stream 0 Destination X Count Register						*/
+#define MDMA_D0_X_MODIFY		0xFFC00F14	/* MemDMA Stream 0 Destination X Modify Register					*/
+#define MDMA_D0_Y_COUNT			0xFFC00F18	/* MemDMA Stream 0 Destination Y Count Register						*/
+#define MDMA_D0_Y_MODIFY		0xFFC00F1C	/* MemDMA Stream 0 Destination Y Modify Register					*/
+#define MDMA_D0_CURR_DESC_PTR	0xFFC00F20	/* MemDMA Stream 0 Destination Current Descriptor Pointer Register	*/
+#define MDMA_D0_CURR_ADDR		0xFFC00F24	/* MemDMA Stream 0 Destination Current Address Register				*/
+#define MDMA_D0_IRQ_STATUS		0xFFC00F28	/* MemDMA Stream 0 Destination Interrupt/Status Register			*/
+#define MDMA_D0_PERIPHERAL_MAP	0xFFC00F2C	/* MemDMA Stream 0 Destination Peripheral Map Register				*/
+#define MDMA_D0_CURR_X_COUNT	0xFFC00F30	/* MemDMA Stream 0 Destination Current X Count Register				*/
+#define MDMA_D0_CURR_Y_COUNT	0xFFC00F38	/* MemDMA Stream 0 Destination Current Y Count Register				*/
+
+#define MDMA_S0_NEXT_DESC_PTR	0xFFC00F40	/* MemDMA Stream 0 Source Next Descriptor Pointer Register			*/
+#define MDMA_S0_START_ADDR		0xFFC00F44	/* MemDMA Stream 0 Source Start Address Register					*/
+#define MDMA_S0_CONFIG			0xFFC00F48	/* MemDMA Stream 0 Source Configuration Register					*/
+#define MDMA_S0_X_COUNT			0xFFC00F50	/* MemDMA Stream 0 Source X Count Register							*/
+#define MDMA_S0_X_MODIFY		0xFFC00F54	/* MemDMA Stream 0 Source X Modify Register							*/
+#define MDMA_S0_Y_COUNT			0xFFC00F58	/* MemDMA Stream 0 Source Y Count Register							*/
+#define MDMA_S0_Y_MODIFY		0xFFC00F5C	/* MemDMA Stream 0 Source Y Modify Register							*/
+#define MDMA_S0_CURR_DESC_PTR	0xFFC00F60	/* MemDMA Stream 0 Source Current Descriptor Pointer Register		*/
+#define MDMA_S0_CURR_ADDR		0xFFC00F64	/* MemDMA Stream 0 Source Current Address Register					*/
+#define MDMA_S0_IRQ_STATUS		0xFFC00F68	/* MemDMA Stream 0 Source Interrupt/Status Register					*/
+#define MDMA_S0_PERIPHERAL_MAP	0xFFC00F6C	/* MemDMA Stream 0 Source Peripheral Map Register					*/
+#define MDMA_S0_CURR_X_COUNT	0xFFC00F70	/* MemDMA Stream 0 Source Current X Count Register					*/
+#define MDMA_S0_CURR_Y_COUNT	0xFFC00F78	/* MemDMA Stream 0 Source Current Y Count Register					*/
+
+#define MDMA_D1_NEXT_DESC_PTR	0xFFC00F80	/* MemDMA Stream 1 Destination Next Descriptor Pointer Register		*/
+#define MDMA_D1_START_ADDR		0xFFC00F84	/* MemDMA Stream 1 Destination Start Address Register				*/
+#define MDMA_D1_CONFIG			0xFFC00F88	/* MemDMA Stream 1 Destination Configuration Register				*/
+#define MDMA_D1_X_COUNT			0xFFC00F90	/* MemDMA Stream 1 Destination X Count Register						*/
+#define MDMA_D1_X_MODIFY		0xFFC00F94	/* MemDMA Stream 1 Destination X Modify Register					*/
+#define MDMA_D1_Y_COUNT			0xFFC00F98	/* MemDMA Stream 1 Destination Y Count Register						*/
+#define MDMA_D1_Y_MODIFY		0xFFC00F9C	/* MemDMA Stream 1 Destination Y Modify Register					*/
+#define MDMA_D1_CURR_DESC_PTR	0xFFC00FA0	/* MemDMA Stream 1 Destination Current Descriptor Pointer Register	*/
+#define MDMA_D1_CURR_ADDR		0xFFC00FA4	/* MemDMA Stream 1 Destination Current Address Register				*/
+#define MDMA_D1_IRQ_STATUS		0xFFC00FA8	/* MemDMA Stream 1 Destination Interrupt/Status Register			*/
+#define MDMA_D1_PERIPHERAL_MAP	0xFFC00FAC	/* MemDMA Stream 1 Destination Peripheral Map Register				*/
+#define MDMA_D1_CURR_X_COUNT	0xFFC00FB0	/* MemDMA Stream 1 Destination Current X Count Register				*/
+#define MDMA_D1_CURR_Y_COUNT	0xFFC00FB8	/* MemDMA Stream 1 Destination Current Y Count Register				*/
+
+#define MDMA_S1_NEXT_DESC_PTR	0xFFC00FC0	/* MemDMA Stream 1 Source Next Descriptor Pointer Register			*/
+#define MDMA_S1_START_ADDR		0xFFC00FC4	/* MemDMA Stream 1 Source Start Address Register					*/
+#define MDMA_S1_CONFIG			0xFFC00FC8	/* MemDMA Stream 1 Source Configuration Register					*/
+#define MDMA_S1_X_COUNT			0xFFC00FD0	/* MemDMA Stream 1 Source X Count Register							*/
+#define MDMA_S1_X_MODIFY		0xFFC00FD4	/* MemDMA Stream 1 Source X Modify Register							*/
+#define MDMA_S1_Y_COUNT			0xFFC00FD8	/* MemDMA Stream 1 Source Y Count Register							*/
+#define MDMA_S1_Y_MODIFY		0xFFC00FDC	/* MemDMA Stream 1 Source Y Modify Register							*/
+#define MDMA_S1_CURR_DESC_PTR	0xFFC00FE0	/* MemDMA Stream 1 Source Current Descriptor Pointer Register		*/
+#define MDMA_S1_CURR_ADDR		0xFFC00FE4	/* MemDMA Stream 1 Source Current Address Register					*/
+#define MDMA_S1_IRQ_STATUS		0xFFC00FE8	/* MemDMA Stream 1 Source Interrupt/Status Register					*/
+#define MDMA_S1_PERIPHERAL_MAP	0xFFC00FEC	/* MemDMA Stream 1 Source Peripheral Map Register					*/
+#define MDMA_S1_CURR_X_COUNT	0xFFC00FF0	/* MemDMA Stream 1 Source Current X Count Register					*/
+#define MDMA_S1_CURR_Y_COUNT	0xFFC00FF8	/* MemDMA Stream 1 Source Current Y Count Register					*/
+
+
+/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF)				*/
+#define PPI_CONTROL			0xFFC01000	/* PPI Control Register			*/
+#define PPI_STATUS			0xFFC01004	/* PPI Status Register			*/
+#define PPI_COUNT			0xFFC01008	/* PPI Transfer Count Register	*/
+#define PPI_DELAY			0xFFC0100C	/* PPI Delay Count Register		*/
+#define PPI_FRAME			0xFFC01010	/* PPI Frame Length Register	*/
+
+
+/* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF)								*/
+#define TWI0_REGBASE			0xFFC01400
+#define TWI0_CLKDIV			0xFFC01400	/* Serial Clock Divider Register			*/
+#define TWI0_CONTROL			0xFFC01404	/* TWI Control Register						*/
+#define TWI0_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register				*/
+#define TWI0_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register				*/
+#define TWI0_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register				*/
+#define TWI0_MASTER_CTL		0xFFC01414	/* Master Mode Control Register				*/
+#define TWI0_MASTER_STAT		0xFFC01418	/* Master Mode Status Register				*/
+#define TWI0_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register				*/
+#define TWI0_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register			*/
+#define TWI0_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register		*/
+#define TWI0_FIFO_CTL		0xFFC01428	/* FIFO Control Register					*/
+#define TWI0_FIFO_STAT		0xFFC0142C	/* FIFO Status Register						*/
+#define TWI0_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register	*/
+#define TWI0_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register	*/
+#define TWI0_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register	*/
+#define TWI0_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register	*/
+
+
+/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)												*/
+#define PORTGIO					0xFFC01500	/* Port G I/O Pin State Specify Register				*/
+#define PORTGIO_CLEAR			0xFFC01504	/* Port G I/O Peripheral Interrupt Clear Register		*/
+#define PORTGIO_SET				0xFFC01508	/* Port G I/O Peripheral Interrupt Set Register			*/
+#define PORTGIO_TOGGLE			0xFFC0150C	/* Port G I/O Pin State Toggle Register					*/
+#define PORTGIO_MASKA			0xFFC01510	/* Port G I/O Mask State Specify Interrupt A Register	*/
+#define PORTGIO_MASKA_CLEAR		0xFFC01514	/* Port G I/O Mask Disable Interrupt A Register			*/
+#define PORTGIO_MASKA_SET		0xFFC01518	/* Port G I/O Mask Enable Interrupt A Register			*/
+#define PORTGIO_MASKA_TOGGLE	0xFFC0151C	/* Port G I/O Mask Toggle Enable Interrupt A Register	*/
+#define PORTGIO_MASKB			0xFFC01520	/* Port G I/O Mask State Specify Interrupt B Register	*/
+#define PORTGIO_MASKB_CLEAR		0xFFC01524	/* Port G I/O Mask Disable Interrupt B Register			*/
+#define PORTGIO_MASKB_SET		0xFFC01528	/* Port G I/O Mask Enable Interrupt B Register			*/
+#define PORTGIO_MASKB_TOGGLE	0xFFC0152C	/* Port G I/O Mask Toggle Enable Interrupt B Register	*/
+#define PORTGIO_DIR				0xFFC01530	/* Port G I/O Direction Register						*/
+#define PORTGIO_POLAR			0xFFC01534	/* Port G I/O Source Polarity Register					*/
+#define PORTGIO_EDGE			0xFFC01538	/* Port G I/O Source Sensitivity Register				*/
+#define PORTGIO_BOTH			0xFFC0153C	/* Port G I/O Set on BOTH Edges Register				*/
+#define PORTGIO_INEN			0xFFC01540	/* Port G I/O Input Enable Register						*/
+
+
+/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF)												*/
+#define PORTHIO					0xFFC01700	/* Port H I/O Pin State Specify Register				*/
+#define PORTHIO_CLEAR			0xFFC01704	/* Port H I/O Peripheral Interrupt Clear Register		*/
+#define PORTHIO_SET				0xFFC01708	/* Port H I/O Peripheral Interrupt Set Register			*/
+#define PORTHIO_TOGGLE			0xFFC0170C	/* Port H I/O Pin State Toggle Register					*/
+#define PORTHIO_MASKA			0xFFC01710	/* Port H I/O Mask State Specify Interrupt A Register	*/
+#define PORTHIO_MASKA_CLEAR		0xFFC01714	/* Port H I/O Mask Disable Interrupt A Register			*/
+#define PORTHIO_MASKA_SET		0xFFC01718	/* Port H I/O Mask Enable Interrupt A Register			*/
+#define PORTHIO_MASKA_TOGGLE	0xFFC0171C	/* Port H I/O Mask Toggle Enable Interrupt A Register	*/
+#define PORTHIO_MASKB			0xFFC01720	/* Port H I/O Mask State Specify Interrupt B Register	*/
+#define PORTHIO_MASKB_CLEAR		0xFFC01724	/* Port H I/O Mask Disable Interrupt B Register			*/
+#define PORTHIO_MASKB_SET		0xFFC01728	/* Port H I/O Mask Enable Interrupt B Register			*/
+#define PORTHIO_MASKB_TOGGLE	0xFFC0172C	/* Port H I/O Mask Toggle Enable Interrupt B Register	*/
+#define PORTHIO_DIR				0xFFC01730	/* Port H I/O Direction Register						*/
+#define PORTHIO_POLAR			0xFFC01734	/* Port H I/O Source Polarity Register					*/
+#define PORTHIO_EDGE			0xFFC01738	/* Port H I/O Source Sensitivity Register				*/
+#define PORTHIO_BOTH			0xFFC0173C	/* Port H I/O Set on BOTH Edges Register				*/
+#define PORTHIO_INEN			0xFFC01740	/* Port H I/O Input Enable Register						*/
+
+
+/* UART1 Controller		(0xFFC02000 - 0xFFC020FF)								*/
+#define UART1_THR			0xFFC02000	/* Transmit Holding register			*/
+#define UART1_RBR			0xFFC02000	/* Receive Buffer register				*/
+#define UART1_DLL			0xFFC02000	/* Divisor Latch (Low-Byte)				*/
+#define UART1_IER			0xFFC02004	/* Interrupt Enable Register			*/
+#define UART1_DLH			0xFFC02004	/* Divisor Latch (High-Byte)			*/
+#define UART1_IIR			0xFFC02008	/* Interrupt Identification Register	*/
+#define UART1_LCR			0xFFC0200C	/* Line Control Register				*/
+#define UART1_MCR			0xFFC02010	/* Modem Control Register				*/
+#define UART1_LSR			0xFFC02014	/* Line Status Register					*/
+#define UART1_MSR			0xFFC02018	/* Modem Status Register				*/
+#define UART1_SCR			0xFFC0201C	/* SCR Scratch Register					*/
+#define UART1_GCTL			0xFFC02024	/* Global Control Register				*/
+
+
+/* Pin Control Registers	(0xFFC03200 - 0xFFC032FF)											*/
+#define PORTF_FER			0xFFC03200	/* Port F Function Enable Register (Alternate/Flag*)	*/
+#define PORTG_FER			0xFFC03204	/* Port G Function Enable Register (Alternate/Flag*)	*/
+#define PORTH_FER			0xFFC03208	/* Port H Function Enable Register (Alternate/Flag*)	*/
+#define BFIN_PORT_MUX			0xFFC0320C	/* Port Multiplexer Control Register					*/
+
+
+/* Handshake MDMA Registers	(0xFFC03300 - 0xFFC033FF)										*/
+#define HMDMA0_CONTROL		0xFFC03300	/* Handshake MDMA0 Control Register					*/
+#define HMDMA0_ECINIT		0xFFC03304	/* HMDMA0 Initial Edge Count Register				*/
+#define HMDMA0_BCINIT		0xFFC03308	/* HMDMA0 Initial Block Count Register				*/
+#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshold Register		*/
+#define HMDMA0_ECOVERFLOW	0xFFC03310	/* HMDMA0 Edge Count Overflow Interrupt Register	*/
+#define HMDMA0_ECOUNT		0xFFC03314	/* HMDMA0 Current Edge Count Register				*/
+#define HMDMA0_BCOUNT		0xFFC03318	/* HMDMA0 Current Block Count Register				*/
+
+#define HMDMA1_CONTROL		0xFFC03340	/* Handshake MDMA1 Control Register					*/
+#define HMDMA1_ECINIT		0xFFC03344	/* HMDMA1 Initial Edge Count Register				*/
+#define HMDMA1_BCINIT		0xFFC03348	/* HMDMA1 Initial Block Count Register				*/
+#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshold Register		*/
+#define HMDMA1_ECOVERFLOW	0xFFC03350	/* HMDMA1 Edge Count Overflow Interrupt Register	*/
+#define HMDMA1_ECOUNT		0xFFC03354	/* HMDMA1 Current Edge Count Register				*/
+#define HMDMA1_BCOUNT		0xFFC03358	/* HMDMA1 Current Block Count Register				*/
+
+
+/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
+#define PORTF_MUX               0xFFC03210      /* Port F mux control */
+#define PORTG_MUX               0xFFC03214      /* Port G mux control */
+#define PORTH_MUX               0xFFC03218      /* Port H mux control */
+#define PORTF_DRIVE             0xFFC03220      /* Port F drive strength control */
+#define PORTG_DRIVE             0xFFC03224      /* Port G drive strength control */
+#define PORTH_DRIVE             0xFFC03228      /* Port H drive strength control */
+#define PORTF_SLEW              0xFFC03230      /* Port F slew control */
+#define PORTG_SLEW              0xFFC03234      /* Port G slew control */
+#define PORTH_SLEW              0xFFC03238      /* Port H slew control */
+#define PORTF_HYSTERESIS        0xFFC03240      /* Port F Schmitt trigger control */
+#define PORTG_HYSTERESIS        0xFFC03244      /* Port G Schmitt trigger control */
+#define PORTH_HYSTERESIS        0xFFC03248      /* Port H Schmitt trigger control */
+#define MISCPORT_DRIVE          0xFFC03280      /* Misc Port drive strength control */
+#define MISCPORT_SLEW           0xFFC03284      /* Misc Port slew control */
+#define MISCPORT_HYSTERESIS     0xFFC03288      /* Misc Port Schmitt trigger control */
+
+
+/***********************************************************************************
+** System MMR Register Bits And Macros
+**
+** Disclaimer:	All macros are intended to make C and Assembly code more readable.
+**				Use these macros carefully, as any that do left shifts for field
+**				depositing will result in the lower order bits being destroyed.  Any
+**				macro that shifts left to properly position the bit-field should be
+**				used as part of an OR to initialize a register and NOT as a dynamic
+**				modifier UNLESS the lower order bits are saved and ORed back in when
+**				the macro is used.
+*************************************************************************************/
+
+/* CHIPID Masks */
+#define CHIPID_VERSION         0xF0000000
+#define CHIPID_FAMILY          0x0FFFF000
+#define CHIPID_MANUFACTURE     0x00000FFE
+
+/* SWRST Masks																		*/
+#define SYSTEM_RESET		0x0007	/* Initiates A System Software Reset			*/
+#define	DOUBLE_FAULT		0x0008	/* Core Double Fault Causes Reset				*/
+#define RESET_DOUBLE		0x2000	/* SW Reset Generated By Core Double-Fault		*/
+#define RESET_WDOG			0x4000	/* SW Reset Generated By Watchdog Timer			*/
+#define RESET_SOFTWARE		0x8000	/* SW Reset Occurred Since Last Read Of SWRST	*/
+
+/* SYSCR Masks																				*/
+#define BMODE				0x0007	/* Boot Mode - Latched During HW Reset From Mode Pins	*/
+#define	NOBOOT				0x0010	/* Execute From L1 or ASYNC Bank 0 When BMODE = 0		*/
+
+
+/* *************  SYSTEM INTERRUPT CONTROLLER MASKS *************************************/
+/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK										*/
+
+#if 0
+#define IRQ_PLL_WAKEUP	0x00000001	/* PLL Wakeup Interrupt			 					*/
+
+#define IRQ_ERROR1      0x00000002  /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */
+#define IRQ_ERROR2      0x00000004  /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */
+#define IRQ_RTC			0x00000008	/* Real Time Clock Interrupt 						*/
+#define IRQ_DMA0		0x00000010	/* DMA Channel 0 (PPI) Interrupt 					*/
+#define IRQ_DMA3		0x00000020	/* DMA Channel 3 (SPORT0 RX) Interrupt 				*/
+#define IRQ_DMA4		0x00000040	/* DMA Channel 4 (SPORT0 TX) Interrupt 				*/
+#define IRQ_DMA5		0x00000080	/* DMA Channel 5 (SPORT1 RX) Interrupt 				*/
+
+#define IRQ_DMA6		0x00000100	/* DMA Channel 6 (SPORT1 TX) Interrupt 		 		*/
+#define IRQ_TWI			0x00000200	/* TWI Interrupt									*/
+#define IRQ_DMA7		0x00000400	/* DMA Channel 7 (SPI) Interrupt 					*/
+#define IRQ_DMA8		0x00000800	/* DMA Channel 8 (UART0 RX) Interrupt 				*/
+#define IRQ_DMA9		0x00001000	/* DMA Channel 9 (UART0 TX) Interrupt 				*/
+#define IRQ_DMA10		0x00002000	/* DMA Channel 10 (UART1 RX) Interrupt 				*/
+#define IRQ_DMA11		0x00004000	/* DMA Channel 11 (UART1 TX) Interrupt 				*/
+#define IRQ_CAN_RX		0x00008000	/* CAN Receive Interrupt 							*/
+
+#define IRQ_CAN_TX		0x00010000	/* CAN Transmit Interrupt  							*/
+#define IRQ_DMA1		0x00020000	/* DMA Channel 1 (Ethernet RX) Interrupt 			*/
+#define IRQ_PFA_PORTH	0x00020000	/* PF Port H (PF47:32) Interrupt A 					*/
+#define IRQ_DMA2		0x00040000	/* DMA Channel 2 (Ethernet TX) Interrupt 			*/
+#define IRQ_PFB_PORTH	0x00040000	/* PF Port H (PF47:32) Interrupt B 					*/
+#define IRQ_TIMER0		0x00080000	/* Timer 0 Interrupt								*/
+#define IRQ_TIMER1		0x00100000	/* Timer 1 Interrupt 								*/
+#define IRQ_TIMER2		0x00200000	/* Timer 2 Interrupt 								*/
+#define IRQ_TIMER3		0x00400000	/* Timer 3 Interrupt 								*/
+#define IRQ_TIMER4		0x00800000	/* Timer 4 Interrupt 								*/
+
+#define IRQ_TIMER5		0x01000000	/* Timer 5 Interrupt 								*/
+#define IRQ_TIMER6		0x02000000	/* Timer 6 Interrupt 								*/
+#define IRQ_TIMER7		0x04000000	/* Timer 7 Interrupt 								*/
+#define IRQ_PFA_PORTFG	0x08000000	/* PF Ports F&G (PF31:0) Interrupt A 				*/
+#define IRQ_PFB_PORTF	0x80000000	/* PF Port F (PF15:0) Interrupt B 					*/
+#define IRQ_DMA12		0x20000000	/* DMA Channels 12 (MDMA1 Source) RX Interrupt 		*/
+#define IRQ_DMA13		0x20000000	/* DMA Channels 13 (MDMA1 Destination) TX Interrupt */
+#define IRQ_DMA14		0x40000000	/* DMA Channels 14 (MDMA0 Source) RX Interrupt 		*/
+#define IRQ_DMA15		0x40000000	/* DMA Channels 15 (MDMA0 Destination) TX Interrupt */
+#define IRQ_WDOG		0x80000000	/* Software Watchdog Timer Interrupt 				*/
+#define IRQ_PFB_PORTG	0x10000000	/* PF Port G (PF31:16) Interrupt B 					*/
+#endif
+
+/* SIC_IAR0 Macros															*/
+#define P0_IVG(x)		(((x)&0xF)-7)			/* Peripheral #0 assigned IVG #x 	*/
+#define P1_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #1 assigned IVG #x 	*/
+#define P2_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #2 assigned IVG #x 	*/
+#define P3_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #3 assigned IVG #x	*/
+#define P4_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #4 assigned IVG #x	*/
+#define P5_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #5 assigned IVG #x	*/
+#define P6_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #6 assigned IVG #x	*/
+#define P7_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #7 assigned IVG #x	*/
+
+/* SIC_IAR1 Macros															*/
+#define P8_IVG(x)		(((x)&0xF)-7)			/* Peripheral #8 assigned IVG #x 	*/
+#define P9_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #9 assigned IVG #x 	*/
+#define P10_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #10 assigned IVG #x	*/
+#define P11_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #11 assigned IVG #x 	*/
+#define P12_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #12 assigned IVG #x	*/
+#define P13_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #13 assigned IVG #x	*/
+#define P14_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #14 assigned IVG #x	*/
+#define P15_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #15 assigned IVG #x	*/
+
+/* SIC_IAR2 Macros															*/
+#define P16_IVG(x)		(((x)&0xF)-7)			/* Peripheral #16 assigned IVG #x	*/
+#define P17_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #17 assigned IVG #x	*/
+#define P18_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #18 assigned IVG #x	*/
+#define P19_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #19 assigned IVG #x	*/
+#define P20_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #20 assigned IVG #x	*/
+#define P21_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #21 assigned IVG #x	*/
+#define P22_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #22 assigned IVG #x	*/
+#define P23_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #23 assigned IVG #x	*/
+
+/* SIC_IAR3 Macros															*/
+#define P24_IVG(x)		(((x)&0xF)-7)			/* Peripheral #24 assigned IVG #x	*/
+#define P25_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #25 assigned IVG #x	*/
+#define P26_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #26 assigned IVG #x	*/
+#define P27_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #27 assigned IVG #x	*/
+#define P28_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #28 assigned IVG #x	*/
+#define P29_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #29 assigned IVG #x	*/
+#define P30_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #30 assigned IVG #x	*/
+#define P31_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #31 assigned IVG #x	*/
+
+
+/* SIC_IMASK Masks																		*/
+#define SIC_UNMASK_ALL	0x00000000					/* Unmask all peripheral interrupts	*/
+#define SIC_MASK_ALL	0xFFFFFFFF					/* Mask all peripheral interrupts	*/
+#define SIC_MASK(x)		(1 << ((x)&0x1F))					/* Mask Peripheral #x interrupt		*/
+#define SIC_UNMASK(x)	(0xFFFFFFFF ^ (1 << ((x)&0x1F)))	/* Unmask Peripheral #x interrupt	*/
+
+/* SIC_IWR Masks																		*/
+#define IWR_DISABLE_ALL	0x00000000					/* Wakeup Disable all peripherals	*/
+#define IWR_ENABLE_ALL	0xFFFFFFFF					/* Wakeup Enable all peripherals	*/
+#define IWR_ENABLE(x)	(1 << ((x)&0x1F))					/* Wakeup Enable Peripheral #x		*/
+#define IWR_DISABLE(x)	(0xFFFFFFFF ^ (1 << ((x)&0x1F))) 	/* Wakeup Disable Peripheral #x		*/
+
+/*  ****************  GENERAL PURPOSE TIMER MASKS  **********************/
+/* TIMER_ENABLE Masks													*/
+#define TIMEN0			0x0001		/* Enable Timer 0					*/
+#define TIMEN1			0x0002		/* Enable Timer 1					*/
+#define TIMEN2			0x0004		/* Enable Timer 2					*/
+#define TIMEN3			0x0008		/* Enable Timer 3					*/
+#define TIMEN4			0x0010		/* Enable Timer 4					*/
+#define TIMEN5			0x0020		/* Enable Timer 5					*/
+#define TIMEN6			0x0040		/* Enable Timer 6					*/
+#define TIMEN7			0x0080		/* Enable Timer 7					*/
+
+/* TIMER_DISABLE Masks													*/
+#define TIMDIS0			TIMEN0		/* Disable Timer 0					*/
+#define TIMDIS1			TIMEN1		/* Disable Timer 1					*/
+#define TIMDIS2			TIMEN2		/* Disable Timer 2					*/
+#define TIMDIS3			TIMEN3		/* Disable Timer 3					*/
+#define TIMDIS4			TIMEN4		/* Disable Timer 4					*/
+#define TIMDIS5			TIMEN5		/* Disable Timer 5					*/
+#define TIMDIS6			TIMEN6		/* Disable Timer 6					*/
+#define TIMDIS7			TIMEN7		/* Disable Timer 7					*/
+
+/* TIMER_STATUS Masks													*/
+#define TIMIL0			0x00000001	/* Timer 0 Interrupt				*/
+#define TIMIL1			0x00000002	/* Timer 1 Interrupt				*/
+#define TIMIL2			0x00000004	/* Timer 2 Interrupt				*/
+#define TIMIL3			0x00000008	/* Timer 3 Interrupt				*/
+#define TOVF_ERR0		0x00000010	/* Timer 0 Counter Overflow			*/
+#define TOVF_ERR1		0x00000020	/* Timer 1 Counter Overflow			*/
+#define TOVF_ERR2		0x00000040	/* Timer 2 Counter Overflow			*/
+#define TOVF_ERR3		0x00000080	/* Timer 3 Counter Overflow			*/
+#define TRUN0			0x00001000	/* Timer 0 Slave Enable Status		*/
+#define TRUN1			0x00002000	/* Timer 1 Slave Enable Status		*/
+#define TRUN2			0x00004000	/* Timer 2 Slave Enable Status		*/
+#define TRUN3			0x00008000	/* Timer 3 Slave Enable Status		*/
+#define TIMIL4			0x00010000	/* Timer 4 Interrupt				*/
+#define TIMIL5			0x00020000	/* Timer 5 Interrupt				*/
+#define TIMIL6			0x00040000	/* Timer 6 Interrupt				*/
+#define TIMIL7			0x00080000	/* Timer 7 Interrupt				*/
+#define TOVF_ERR4		0x00100000	/* Timer 4 Counter Overflow			*/
+#define TOVF_ERR5		0x00200000	/* Timer 5 Counter Overflow			*/
+#define TOVF_ERR6		0x00400000	/* Timer 6 Counter Overflow			*/
+#define TOVF_ERR7		0x00800000	/* Timer 7 Counter Overflow			*/
+#define TRUN4			0x10000000	/* Timer 4 Slave Enable Status		*/
+#define TRUN5			0x20000000	/* Timer 5 Slave Enable Status		*/
+#define TRUN6			0x40000000	/* Timer 6 Slave Enable Status		*/
+#define TRUN7			0x80000000	/* Timer 7 Slave Enable Status		*/
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define TOVL_ERR0 TOVF_ERR0
+#define TOVL_ERR1 TOVF_ERR1
+#define TOVL_ERR2 TOVF_ERR2
+#define TOVL_ERR3 TOVF_ERR3
+#define TOVL_ERR4 TOVF_ERR4
+#define TOVL_ERR5 TOVF_ERR5
+#define TOVL_ERR6 TOVF_ERR6
+#define TOVL_ERR7 TOVF_ERR7
+
+/* TIMERx_CONFIG Masks													*/
+#define PWM_OUT			0x0001	/* Pulse-Width Modulation Output Mode	*/
+#define WDTH_CAP		0x0002	/* Width Capture Input Mode				*/
+#define EXT_CLK			0x0003	/* External Clock Mode					*/
+#define PULSE_HI		0x0004	/* Action Pulse (Positive/Negative*)	*/
+#define PERIOD_CNT		0x0008	/* Period Count							*/
+#define IRQ_ENA			0x0010	/* Interrupt Request Enable				*/
+#define TIN_SEL			0x0020	/* Timer Input Select					*/
+#define OUT_DIS			0x0040	/* Output Pad Disable					*/
+#define CLK_SEL			0x0080	/* Timer Clock Select					*/
+#define TOGGLE_HI		0x0100	/* PWM_OUT PULSE_HI Toggle Mode			*/
+#define EMU_RUN			0x0200	/* Emulation Behavior Select			*/
+#define ERR_TYP			0xC000	/* Error Type							*/
+
+/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  *************************/
+/* EBIU_AMGCTL Masks																	*/
+#define AMCKEN			0x0001		/* Enable CLKOUT									*/
+#define	AMBEN_NONE		0x0000		/* All Banks Disabled								*/
+#define AMBEN_B0		0x0002		/* Enable Async Memory Bank 0 only					*/
+#define AMBEN_B0_B1		0x0004		/* Enable Async Memory Banks 0 & 1 only				*/
+#define AMBEN_B0_B1_B2	0x0006		/* Enable Async Memory Banks 0, 1, and 2			*/
+#define AMBEN_ALL		0x0008		/* Enable Async Memory Banks (all) 0, 1, 2, and 3	*/
+
+/* EBIU_AMBCTL0 Masks																	*/
+#define B0RDYEN			0x00000001  /* Bank 0 (B0) RDY Enable							*/
+#define B0RDYPOL		0x00000002  /* B0 RDY Active High								*/
+#define B0TT_1			0x00000004  /* B0 Transition Time (Read to Write) = 1 cycle		*/
+#define B0TT_2			0x00000008  /* B0 Transition Time (Read to Write) = 2 cycles	*/
+#define B0TT_3			0x0000000C  /* B0 Transition Time (Read to Write) = 3 cycles	*/
+#define B0TT_4			0x00000000  /* B0 Transition Time (Read to Write) = 4 cycles	*/
+#define B0ST_1			0x00000010  /* B0 Setup Time (AOE to Read/Write) = 1 cycle		*/
+#define B0ST_2			0x00000020  /* B0 Setup Time (AOE to Read/Write) = 2 cycles		*/
+#define B0ST_3			0x00000030  /* B0 Setup Time (AOE to Read/Write) = 3 cycles		*/
+#define B0ST_4			0x00000000  /* B0 Setup Time (AOE to Read/Write) = 4 cycles		*/
+#define B0HT_1			0x00000040  /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle		*/
+#define B0HT_2			0x00000080  /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles	*/
+#define B0HT_3			0x000000C0  /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles	*/
+#define B0HT_0			0x00000000  /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles	*/
+#define B0RAT_1			0x00000100  /* B0 Read Access Time = 1 cycle					*/
+#define B0RAT_2			0x00000200  /* B0 Read Access Time = 2 cycles					*/
+#define B0RAT_3			0x00000300  /* B0 Read Access Time = 3 cycles					*/
+#define B0RAT_4			0x00000400  /* B0 Read Access Time = 4 cycles					*/
+#define B0RAT_5			0x00000500  /* B0 Read Access Time = 5 cycles					*/
+#define B0RAT_6			0x00000600  /* B0 Read Access Time = 6 cycles					*/
+#define B0RAT_7			0x00000700  /* B0 Read Access Time = 7 cycles					*/
+#define B0RAT_8			0x00000800  /* B0 Read Access Time = 8 cycles					*/
+#define B0RAT_9			0x00000900  /* B0 Read Access Time = 9 cycles					*/
+#define B0RAT_10		0x00000A00  /* B0 Read Access Time = 10 cycles					*/
+#define B0RAT_11		0x00000B00  /* B0 Read Access Time = 11 cycles					*/
+#define B0RAT_12		0x00000C00  /* B0 Read Access Time = 12 cycles					*/
+#define B0RAT_13		0x00000D00  /* B0 Read Access Time = 13 cycles					*/
+#define B0RAT_14		0x00000E00  /* B0 Read Access Time = 14 cycles					*/
+#define B0RAT_15		0x00000F00  /* B0 Read Access Time = 15 cycles					*/
+#define B0WAT_1			0x00001000  /* B0 Write Access Time = 1 cycle					*/
+#define B0WAT_2			0x00002000  /* B0 Write Access Time = 2 cycles					*/
+#define B0WAT_3			0x00003000  /* B0 Write Access Time = 3 cycles					*/
+#define B0WAT_4			0x00004000  /* B0 Write Access Time = 4 cycles					*/
+#define B0WAT_5			0x00005000  /* B0 Write Access Time = 5 cycles					*/
+#define B0WAT_6			0x00006000  /* B0 Write Access Time = 6 cycles					*/
+#define B0WAT_7			0x00007000  /* B0 Write Access Time = 7 cycles					*/
+#define B0WAT_8			0x00008000  /* B0 Write Access Time = 8 cycles					*/
+#define B0WAT_9			0x00009000  /* B0 Write Access Time = 9 cycles					*/
+#define B0WAT_10		0x0000A000  /* B0 Write Access Time = 10 cycles					*/
+#define B0WAT_11		0x0000B000  /* B0 Write Access Time = 11 cycles					*/
+#define B0WAT_12		0x0000C000  /* B0 Write Access Time = 12 cycles					*/
+#define B0WAT_13		0x0000D000  /* B0 Write Access Time = 13 cycles					*/
+#define B0WAT_14		0x0000E000  /* B0 Write Access Time = 14 cycles					*/
+#define B0WAT_15		0x0000F000  /* B0 Write Access Time = 15 cycles					*/
+
+#define B1RDYEN			0x00010000  /* Bank 1 (B1) RDY Enable                       	*/
+#define B1RDYPOL		0x00020000  /* B1 RDY Active High                           	*/
+#define B1TT_1			0x00040000  /* B1 Transition Time (Read to Write) = 1 cycle 	*/
+#define B1TT_2			0x00080000  /* B1 Transition Time (Read to Write) = 2 cycles	*/
+#define B1TT_3			0x000C0000  /* B1 Transition Time (Read to Write) = 3 cycles	*/
+#define B1TT_4			0x00000000  /* B1 Transition Time (Read to Write) = 4 cycles	*/
+#define B1ST_1			0x00100000  /* B1 Setup Time (AOE to Read/Write) = 1 cycle  	*/
+#define B1ST_2			0x00200000  /* B1 Setup Time (AOE to Read/Write) = 2 cycles 	*/
+#define B1ST_3			0x00300000  /* B1 Setup Time (AOE to Read/Write) = 3 cycles 	*/
+#define B1ST_4			0x00000000  /* B1 Setup Time (AOE to Read/Write) = 4 cycles 	*/
+#define B1HT_1			0x00400000  /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle 	*/
+#define B1HT_2			0x00800000  /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles	*/
+#define B1HT_3			0x00C00000  /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles	*/
+#define B1HT_0			0x00000000  /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles	*/
+#define B1RAT_1			0x01000000  /* B1 Read Access Time = 1 cycle					*/
+#define B1RAT_2			0x02000000  /* B1 Read Access Time = 2 cycles					*/
+#define B1RAT_3			0x03000000  /* B1 Read Access Time = 3 cycles					*/
+#define B1RAT_4			0x04000000  /* B1 Read Access Time = 4 cycles					*/
+#define B1RAT_5			0x05000000  /* B1 Read Access Time = 5 cycles					*/
+#define B1RAT_6			0x06000000  /* B1 Read Access Time = 6 cycles					*/
+#define B1RAT_7			0x07000000  /* B1 Read Access Time = 7 cycles					*/
+#define B1RAT_8			0x08000000  /* B1 Read Access Time = 8 cycles					*/
+#define B1RAT_9			0x09000000  /* B1 Read Access Time = 9 cycles					*/
+#define B1RAT_10		0x0A000000  /* B1 Read Access Time = 10 cycles					*/
+#define B1RAT_11		0x0B000000  /* B1 Read Access Time = 11 cycles					*/
+#define B1RAT_12		0x0C000000  /* B1 Read Access Time = 12 cycles					*/
+#define B1RAT_13		0x0D000000  /* B1 Read Access Time = 13 cycles					*/
+#define B1RAT_14		0x0E000000  /* B1 Read Access Time = 14 cycles					*/
+#define B1RAT_15		0x0F000000  /* B1 Read Access Time = 15 cycles					*/
+#define B1WAT_1			0x10000000  /* B1 Write Access Time = 1 cycle					*/
+#define B1WAT_2			0x20000000  /* B1 Write Access Time = 2 cycles					*/
+#define B1WAT_3			0x30000000  /* B1 Write Access Time = 3 cycles					*/
+#define B1WAT_4			0x40000000  /* B1 Write Access Time = 4 cycles					*/
+#define B1WAT_5			0x50000000  /* B1 Write Access Time = 5 cycles					*/
+#define B1WAT_6			0x60000000  /* B1 Write Access Time = 6 cycles					*/
+#define B1WAT_7			0x70000000  /* B1 Write Access Time = 7 cycles					*/
+#define B1WAT_8			0x80000000  /* B1 Write Access Time = 8 cycles					*/
+#define B1WAT_9			0x90000000  /* B1 Write Access Time = 9 cycles					*/
+#define B1WAT_10		0xA0000000  /* B1 Write Access Time = 10 cycles					*/
+#define B1WAT_11		0xB0000000  /* B1 Write Access Time = 11 cycles					*/
+#define B1WAT_12		0xC0000000  /* B1 Write Access Time = 12 cycles					*/
+#define B1WAT_13		0xD0000000  /* B1 Write Access Time = 13 cycles					*/
+#define B1WAT_14		0xE0000000  /* B1 Write Access Time = 14 cycles					*/
+#define B1WAT_15		0xF0000000  /* B1 Write Access Time = 15 cycles					*/
+
+/* EBIU_AMBCTL1 Masks																	*/
+#define B2RDYEN			0x00000001  /* Bank 2 (B2) RDY Enable							*/
+#define B2RDYPOL		0x00000002  /* B2 RDY Active High								*/
+#define B2TT_1			0x00000004  /* B2 Transition Time (Read to Write) = 1 cycle		*/
+#define B2TT_2			0x00000008  /* B2 Transition Time (Read to Write) = 2 cycles	*/
+#define B2TT_3			0x0000000C  /* B2 Transition Time (Read to Write) = 3 cycles	*/
+#define B2TT_4			0x00000000  /* B2 Transition Time (Read to Write) = 4 cycles	*/
+#define B2ST_1			0x00000010  /* B2 Setup Time (AOE to Read/Write) = 1 cycle		*/
+#define B2ST_2			0x00000020  /* B2 Setup Time (AOE to Read/Write) = 2 cycles		*/
+#define B2ST_3			0x00000030  /* B2 Setup Time (AOE to Read/Write) = 3 cycles		*/
+#define B2ST_4			0x00000000  /* B2 Setup Time (AOE to Read/Write) = 4 cycles		*/
+#define B2HT_1			0x00000040  /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle		*/
+#define B2HT_2			0x00000080  /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles	*/
+#define B2HT_3			0x000000C0  /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles	*/
+#define B2HT_0			0x00000000  /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles	*/
+#define B2RAT_1			0x00000100  /* B2 Read Access Time = 1 cycle					*/
+#define B2RAT_2			0x00000200  /* B2 Read Access Time = 2 cycles					*/
+#define B2RAT_3			0x00000300  /* B2 Read Access Time = 3 cycles					*/
+#define B2RAT_4			0x00000400  /* B2 Read Access Time = 4 cycles					*/
+#define B2RAT_5			0x00000500  /* B2 Read Access Time = 5 cycles					*/
+#define B2RAT_6			0x00000600  /* B2 Read Access Time = 6 cycles					*/
+#define B2RAT_7			0x00000700  /* B2 Read Access Time = 7 cycles					*/
+#define B2RAT_8			0x00000800  /* B2 Read Access Time = 8 cycles					*/
+#define B2RAT_9			0x00000900  /* B2 Read Access Time = 9 cycles					*/
+#define B2RAT_10		0x00000A00  /* B2 Read Access Time = 10 cycles					*/
+#define B2RAT_11		0x00000B00  /* B2 Read Access Time = 11 cycles					*/
+#define B2RAT_12		0x00000C00  /* B2 Read Access Time = 12 cycles					*/
+#define B2RAT_13		0x00000D00  /* B2 Read Access Time = 13 cycles					*/
+#define B2RAT_14		0x00000E00  /* B2 Read Access Time = 14 cycles					*/
+#define B2RAT_15		0x00000F00  /* B2 Read Access Time = 15 cycles					*/
+#define B2WAT_1			0x00001000  /* B2 Write Access Time = 1 cycle					*/
+#define B2WAT_2			0x00002000  /* B2 Write Access Time = 2 cycles					*/
+#define B2WAT_3			0x00003000  /* B2 Write Access Time = 3 cycles					*/
+#define B2WAT_4			0x00004000  /* B2 Write Access Time = 4 cycles					*/
+#define B2WAT_5			0x00005000  /* B2 Write Access Time = 5 cycles					*/
+#define B2WAT_6			0x00006000  /* B2 Write Access Time = 6 cycles					*/
+#define B2WAT_7			0x00007000  /* B2 Write Access Time = 7 cycles					*/
+#define B2WAT_8			0x00008000  /* B2 Write Access Time = 8 cycles					*/
+#define B2WAT_9			0x00009000  /* B2 Write Access Time = 9 cycles					*/
+#define B2WAT_10		0x0000A000  /* B2 Write Access Time = 10 cycles					*/
+#define B2WAT_11		0x0000B000  /* B2 Write Access Time = 11 cycles					*/
+#define B2WAT_12		0x0000C000  /* B2 Write Access Time = 12 cycles					*/
+#define B2WAT_13		0x0000D000  /* B2 Write Access Time = 13 cycles					*/
+#define B2WAT_14		0x0000E000  /* B2 Write Access Time = 14 cycles					*/
+#define B2WAT_15		0x0000F000  /* B2 Write Access Time = 15 cycles					*/
+
+#define B3RDYEN			0x00010000  /* Bank 3 (B3) RDY Enable							*/
+#define B3RDYPOL		0x00020000  /* B3 RDY Active High								*/
+#define B3TT_1			0x00040000  /* B3 Transition Time (Read to Write) = 1 cycle		*/
+#define B3TT_2			0x00080000  /* B3 Transition Time (Read to Write) = 2 cycles	*/
+#define B3TT_3			0x000C0000  /* B3 Transition Time (Read to Write) = 3 cycles	*/
+#define B3TT_4			0x00000000  /* B3 Transition Time (Read to Write) = 4 cycles	*/
+#define B3ST_1			0x00100000  /* B3 Setup Time (AOE to Read/Write) = 1 cycle		*/
+#define B3ST_2			0x00200000  /* B3 Setup Time (AOE to Read/Write) = 2 cycles		*/
+#define B3ST_3			0x00300000  /* B3 Setup Time (AOE to Read/Write) = 3 cycles		*/
+#define B3ST_4			0x00000000  /* B3 Setup Time (AOE to Read/Write) = 4 cycles		*/
+#define B3HT_1			0x00400000  /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle		*/
+#define B3HT_2			0x00800000  /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles	*/
+#define B3HT_3			0x00C00000  /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles	*/
+#define B3HT_0			0x00000000  /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles	*/
+#define B3RAT_1			0x01000000  /* B3 Read Access Time = 1 cycle					*/
+#define B3RAT_2			0x02000000  /* B3 Read Access Time = 2 cycles					*/
+#define B3RAT_3			0x03000000  /* B3 Read Access Time = 3 cycles					*/
+#define B3RAT_4			0x04000000  /* B3 Read Access Time = 4 cycles					*/
+#define B3RAT_5			0x05000000  /* B3 Read Access Time = 5 cycles					*/
+#define B3RAT_6			0x06000000  /* B3 Read Access Time = 6 cycles					*/
+#define B3RAT_7			0x07000000  /* B3 Read Access Time = 7 cycles					*/
+#define B3RAT_8			0x08000000  /* B3 Read Access Time = 8 cycles					*/
+#define B3RAT_9			0x09000000  /* B3 Read Access Time = 9 cycles					*/
+#define B3RAT_10		0x0A000000  /* B3 Read Access Time = 10 cycles					*/
+#define B3RAT_11		0x0B000000  /* B3 Read Access Time = 11 cycles					*/
+#define B3RAT_12		0x0C000000  /* B3 Read Access Time = 12 cycles					*/
+#define B3RAT_13		0x0D000000  /* B3 Read Access Time = 13 cycles					*/
+#define B3RAT_14		0x0E000000  /* B3 Read Access Time = 14 cycles					*/
+#define B3RAT_15		0x0F000000  /* B3 Read Access Time = 15 cycles					*/
+#define B3WAT_1			0x10000000  /* B3 Write Access Time = 1 cycle					*/
+#define B3WAT_2			0x20000000  /* B3 Write Access Time = 2 cycles					*/
+#define B3WAT_3			0x30000000  /* B3 Write Access Time = 3 cycles					*/
+#define B3WAT_4			0x40000000  /* B3 Write Access Time = 4 cycles					*/
+#define B3WAT_5			0x50000000  /* B3 Write Access Time = 5 cycles					*/
+#define B3WAT_6			0x60000000  /* B3 Write Access Time = 6 cycles					*/
+#define B3WAT_7			0x70000000  /* B3 Write Access Time = 7 cycles					*/
+#define B3WAT_8			0x80000000  /* B3 Write Access Time = 8 cycles					*/
+#define B3WAT_9			0x90000000  /* B3 Write Access Time = 9 cycles					*/
+#define B3WAT_10		0xA0000000  /* B3 Write Access Time = 10 cycles					*/
+#define B3WAT_11		0xB0000000  /* B3 Write Access Time = 11 cycles					*/
+#define B3WAT_12		0xC0000000  /* B3 Write Access Time = 12 cycles					*/
+#define B3WAT_13		0xD0000000  /* B3 Write Access Time = 13 cycles					*/
+#define B3WAT_14		0xE0000000  /* B3 Write Access Time = 14 cycles					*/
+#define B3WAT_15		0xF0000000  /* B3 Write Access Time = 15 cycles					*/
+
+
+/* **********************  SDRAM CONTROLLER MASKS  **********************************************/
+/* EBIU_SDGCTL Masks																			*/
+#define SCTLE			0x00000001	/* Enable SDRAM Signals										*/
+#define CL_2			0x00000008	/* SDRAM CAS Latency = 2 cycles								*/
+#define CL_3			0x0000000C	/* SDRAM CAS Latency = 3 cycles								*/
+#define PASR_ALL		0x00000000	/* All 4 SDRAM Banks Refreshed In Self-Refresh				*/
+#define PASR_B0_B1		0x00000010	/* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh		*/
+#define PASR_B0			0x00000020	/* Only SDRAM Bank 0 Is Refreshed In Self-Refresh			*/
+#define TRAS_1			0x00000040	/* SDRAM tRAS = 1 cycle										*/
+#define TRAS_2			0x00000080	/* SDRAM tRAS = 2 cycles									*/
+#define TRAS_3			0x000000C0	/* SDRAM tRAS = 3 cycles									*/
+#define TRAS_4			0x00000100	/* SDRAM tRAS = 4 cycles									*/
+#define TRAS_5			0x00000140	/* SDRAM tRAS = 5 cycles									*/
+#define TRAS_6			0x00000180	/* SDRAM tRAS = 6 cycles									*/
+#define TRAS_7			0x000001C0	/* SDRAM tRAS = 7 cycles									*/
+#define TRAS_8			0x00000200	/* SDRAM tRAS = 8 cycles									*/
+#define TRAS_9			0x00000240	/* SDRAM tRAS = 9 cycles									*/
+#define TRAS_10			0x00000280	/* SDRAM tRAS = 10 cycles									*/
+#define TRAS_11			0x000002C0	/* SDRAM tRAS = 11 cycles									*/
+#define TRAS_12			0x00000300	/* SDRAM tRAS = 12 cycles									*/
+#define TRAS_13			0x00000340	/* SDRAM tRAS = 13 cycles									*/
+#define TRAS_14			0x00000380	/* SDRAM tRAS = 14 cycles									*/
+#define TRAS_15			0x000003C0	/* SDRAM tRAS = 15 cycles									*/
+#define TRP_1			0x00000800	/* SDRAM tRP = 1 cycle										*/
+#define TRP_2			0x00001000	/* SDRAM tRP = 2 cycles										*/
+#define TRP_3			0x00001800	/* SDRAM tRP = 3 cycles										*/
+#define TRP_4			0x00002000	/* SDRAM tRP = 4 cycles										*/
+#define TRP_5			0x00002800	/* SDRAM tRP = 5 cycles										*/
+#define TRP_6			0x00003000	/* SDRAM tRP = 6 cycles										*/
+#define TRP_7			0x00003800	/* SDRAM tRP = 7 cycles										*/
+#define TRCD_1			0x00008000	/* SDRAM tRCD = 1 cycle										*/
+#define TRCD_2			0x00010000	/* SDRAM tRCD = 2 cycles									*/
+#define TRCD_3			0x00018000	/* SDRAM tRCD = 3 cycles									*/
+#define TRCD_4			0x00020000	/* SDRAM tRCD = 4 cycles									*/
+#define TRCD_5			0x00028000	/* SDRAM tRCD = 5 cycles									*/
+#define TRCD_6			0x00030000	/* SDRAM tRCD = 6 cycles									*/
+#define TRCD_7			0x00038000	/* SDRAM tRCD = 7 cycles									*/
+#define TWR_1			0x00080000	/* SDRAM tWR = 1 cycle										*/
+#define TWR_2			0x00100000	/* SDRAM tWR = 2 cycles										*/
+#define TWR_3			0x00180000	/* SDRAM tWR = 3 cycles										*/
+#define PUPSD			0x00200000	/* Power-Up Start Delay (15 SCLK Cycles Delay)				*/
+#define PSM				0x00400000	/* Power-Up Sequence (Mode Register Before/After* Refresh)	*/
+#define PSS				0x00800000	/* Enable Power-Up Sequence on Next SDRAM Access			*/
+#define SRFS			0x01000000	/* Enable SDRAM Self-Refresh Mode							*/
+#define EBUFE			0x02000000	/* Enable External Buffering Timing							*/
+#define FBBRW			0x04000000	/* Enable Fast Back-To-Back Read To Write					*/
+#define EMREN			0x10000000	/* Extended Mode Register Enable							*/
+#define TCSR			0x20000000	/* Temp-Compensated Self-Refresh Value (85/45* Deg C)		*/
+#define CDDBG			0x40000000	/* Tristate SDRAM Controls During Bus Grant					*/
+
+/* EBIU_SDBCTL Masks																		*/
+#define EBE				0x0001		/* Enable SDRAM External Bank							*/
+#define EBSZ_16			0x0000		/* SDRAM External Bank Size = 16MB	*/
+#define EBSZ_32			0x0002		/* SDRAM External Bank Size = 32MB	*/
+#define EBSZ_64			0x0004		/* SDRAM External Bank Size = 64MB	*/
+#define EBSZ_128		0x0006		/* SDRAM External Bank Size = 128MB		*/
+#define EBSZ_256		0x0008		/* SDRAM External Bank Size = 256MB 	*/
+#define EBSZ_512		0x000A		/* SDRAM External Bank Size = 512MB		*/
+#define EBCAW_8			0x0000		/* SDRAM External Bank Column Address Width = 8 Bits	*/
+#define EBCAW_9			0x0010		/* SDRAM External Bank Column Address Width = 9 Bits	*/
+#define EBCAW_10		0x0020		/* SDRAM External Bank Column Address Width = 10 Bits	*/
+#define EBCAW_11		0x0030		/* SDRAM External Bank Column Address Width = 11 Bits	*/
+
+/* EBIU_SDSTAT Masks														*/
+#define SDCI			0x0001		/* SDRAM Controller Idle 				*/
+#define SDSRA			0x0002		/* SDRAM Self-Refresh Active			*/
+#define SDPUA			0x0004		/* SDRAM Power-Up Active 				*/
+#define SDRS			0x0008		/* SDRAM Will Power-Up On Next Access	*/
+#define SDEASE			0x0010		/* SDRAM EAB Sticky Error Status		*/
+#define BGSTAT			0x0020		/* Bus Grant Status						*/
+
+
+/* **************************  DMA CONTROLLER MASKS  ********************************/
+
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks								*/
+#define CTYPE			0x0040	/* DMA Channel Type Indicator (Memory/Peripheral*)	*/
+#define PMAP			0xF000	/* Peripheral Mapped To This Channel				*/
+#define PMAP_PPI		0x0000	/* 		PPI Port DMA								*/
+#define	PMAP_EMACRX		0x1000	/* 		Ethernet Receive DMA						*/
+#define PMAP_EMACTX		0x2000	/* 		Ethernet Transmit DMA						*/
+#define PMAP_SPORT0RX	0x3000	/* 		SPORT0 Receive DMA							*/
+#define PMAP_SPORT0TX	0x4000	/* 		SPORT0 Transmit DMA							*/
+#define PMAP_SPORT1RX	0x5000	/* 		SPORT1 Receive DMA							*/
+#define PMAP_SPORT1TX	0x6000	/* 		SPORT1 Transmit DMA							*/
+#define PMAP_SPI		0x7000	/* 		SPI Port DMA								*/
+#define PMAP_UART0RX	0x8000	/* 		UART0 Port Receive DMA						*/
+#define PMAP_UART0TX	0x9000	/* 		UART0 Port Transmit DMA						*/
+#define	PMAP_UART1RX	0xA000	/* 		UART1 Port Receive DMA						*/
+#define	PMAP_UART1TX	0xB000	/* 		UART1 Port Transmit DMA						*/
+
+/*  ************  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
+/*  PPI_CONTROL Masks													*/
+#define PORT_EN			0x0001		/* PPI Port Enable					*/
+#define PORT_DIR		0x0002		/* PPI Port Direction				*/
+#define XFR_TYPE		0x000C		/* PPI Transfer Type				*/
+#define PORT_CFG		0x0030		/* PPI Port Configuration			*/
+#define FLD_SEL			0x0040		/* PPI Active Field Select			*/
+#define PACK_EN			0x0080		/* PPI Packing Mode					*/
+#define DMA32			0x0100		/* PPI 32-bit DMA Enable			*/
+#define SKIP_EN			0x0200		/* PPI Skip Element Enable			*/
+#define SKIP_EO			0x0400		/* PPI Skip Even/Odd Elements		*/
+#define DLEN_8			0x0000		/* Data Length = 8 Bits				*/
+#define DLEN_10			0x0800		/* Data Length = 10 Bits			*/
+#define DLEN_11			0x1000		/* Data Length = 11 Bits			*/
+#define DLEN_12			0x1800		/* Data Length = 12 Bits			*/
+#define DLEN_13			0x2000		/* Data Length = 13 Bits			*/
+#define DLEN_14			0x2800		/* Data Length = 14 Bits			*/
+#define DLEN_15			0x3000		/* Data Length = 15 Bits			*/
+#define DLEN_16			0x3800		/* Data Length = 16 Bits			*/
+#define DLENGTH			0x3800		/* PPI Data Length  */
+#define POLC			0x4000		/* PPI Clock Polarity				*/
+#define POLS			0x8000		/* PPI Frame Sync Polarity			*/
+
+/* PPI_STATUS Masks														*/
+#define FLD				0x0400		/* Field Indicator					*/
+#define FT_ERR			0x0800		/* Frame Track Error				*/
+#define OVR				0x1000		/* FIFO Overflow Error				*/
+#define UNDR			0x2000		/* FIFO Underrun Error				*/
+#define ERR_DET			0x4000		/* Error Detected Indicator			*/
+#define ERR_NCOR		0x8000		/* Error Not Corrected Indicator	*/
+
+
+/*  *******************  PIN CONTROL REGISTER MASKS  ************************/
+/* PORT_MUX Masks															*/
+#define	PJSE			0x0001			/* Port J SPI/SPORT Enable			*/
+#define	PJSE_SPORT		0x0000			/* 		Enable TFS0/DT0PRI			*/
+#define	PJSE_SPI		0x0001			/* 		Enable SPI_SSEL3:2			*/
+
+#define	PJCE(x)			(((x)&0x3)<<1)	/* Port J CAN/SPI/SPORT Enable		*/
+#define	PJCE_SPORT		0x0000			/* 		Enable DR0SEC/DT0SEC		*/
+#define	PJCE_CAN		0x0002			/* 		Enable CAN RX/TX			*/
+#define	PJCE_SPI		0x0004			/* 		Enable SPI_SSEL7			*/
+
+#define	PFDE			0x0008			/* Port F DMA Request Enable		*/
+#define	PFDE_UART		0x0000			/* 		Enable UART0 RX/TX			*/
+#define	PFDE_DMA		0x0008			/* 		Enable DMAR1:0				*/
+
+#define	PFTE			0x0010			/* Port F Timer Enable				*/
+#define	PFTE_UART		0x0000			/*		Enable UART1 RX/TX			*/
+#define	PFTE_TIMER		0x0010			/* 		Enable TMR7:6				*/
+
+#define	PFS6E			0x0020			/* Port F SPI SSEL 6 Enable			*/
+#define	PFS6E_TIMER		0x0000			/*		Enable TMR5					*/
+#define	PFS6E_SPI		0x0020			/* 		Enable SPI_SSEL6			*/
+
+#define	PFS5E			0x0040			/* Port F SPI SSEL 5 Enable			*/
+#define	PFS5E_TIMER		0x0000			/*		Enable TMR4					*/
+#define	PFS5E_SPI		0x0040			/* 		Enable SPI_SSEL5			*/
+
+#define	PFS4E			0x0080			/* Port F SPI SSEL 4 Enable			*/
+#define	PFS4E_TIMER		0x0000			/*		Enable TMR3					*/
+#define	PFS4E_SPI		0x0080			/* 		Enable SPI_SSEL4			*/
+
+#define	PFFE			0x0100			/* Port F PPI Frame Sync Enable		*/
+#define	PFFE_TIMER		0x0000			/* 		Enable TMR2					*/
+#define	PFFE_PPI		0x0100			/* 		Enable PPI FS3				*/
+
+#define	PGSE			0x0200			/* Port G SPORT1 Secondary Enable	*/
+#define	PGSE_PPI		0x0000			/* 		Enable PPI D9:8				*/
+#define	PGSE_SPORT		0x0200			/* 		Enable DR1SEC/DT1SEC		*/
+
+#define	PGRE			0x0400			/* Port G SPORT1 Receive Enable		*/
+#define	PGRE_PPI		0x0000			/* 		Enable PPI D12:10			*/
+#define	PGRE_SPORT		0x0400			/* 		Enable DR1PRI/RFS1/RSCLK1	*/
+
+#define	PGTE			0x0800			/* Port G SPORT1 Transmit Enable	*/
+#define	PGTE_PPI		0x0000			/* 		Enable PPI D15:13			*/
+#define	PGTE_SPORT		0x0800			/* 		Enable DT1PRI/TFS1/TSCLK1	*/
+
+/* entry addresses of the user-callable Boot ROM functions */
+
+#define _BOOTROM_RESET 0xEF000000
+#define _BOOTROM_FINAL_INIT 0xEF000002
+#define _BOOTROM_DO_MEMORY_DMA 0xEF000006
+#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
+#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
+#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
+#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
+#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
+#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define	PGDE_UART   PFDE_UART
+#define	PGDE_DMA    PFDE_DMA
+#define	CKELOW		SCKELOW
+
+/* HOST Port Registers */
+
+#define                     HOST_CONTROL  0xffc03400   /* HOST Control Register */
+#define                      HOST_STATUS  0xffc03404   /* HOST Status Register */
+#define                     HOST_TIMEOUT  0xffc03408   /* HOST Acknowledge Mode Timeout Register */
+
+/* Counter Registers */
+
+#define                       CNT_CONFIG  0xffc03500   /* Configuration Register */
+#define                        CNT_IMASK  0xffc03504   /* Interrupt Mask Register */
+#define                       CNT_STATUS  0xffc03508   /* Status Register */
+#define                      CNT_COMMAND  0xffc0350c   /* Command Register */
+#define                     CNT_DEBOUNCE  0xffc03510   /* Debounce Register */
+#define                      CNT_COUNTER  0xffc03514   /* Counter Register */
+#define                          CNT_MAX  0xffc03518   /* Maximal Count Register */
+#define                          CNT_MIN  0xffc0351c   /* Minimal Count Register */
+
+/* OTP/FUSE Registers */
+
+#define                      OTP_CONTROL  0xffc03600   /* OTP/Fuse Control Register */
+#define                          OTP_BEN  0xffc03604   /* OTP/Fuse Byte Enable */
+#define                       OTP_STATUS  0xffc03608   /* OTP/Fuse Status */
+#define                       OTP_TIMING  0xffc0360c   /* OTP/Fuse Access Timing */
+
+/* Security Registers */
+
+#define                    SECURE_SYSSWT  0xffc03620   /* Secure System Switches */
+#define                   SECURE_CONTROL  0xffc03624   /* Secure Control */
+#define                    SECURE_STATUS  0xffc03628   /* Secure Status */
+
+/* OTP Read/Write Data Buffer Registers */
+
+#define                        OTP_DATA0  0xffc03680   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define                        OTP_DATA1  0xffc03684   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define                        OTP_DATA2  0xffc03688   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define                        OTP_DATA3  0xffc0368c   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+
+/* Motor Control PWM Registers */
+
+#define                         PWM_CTRL  0xffc03700   /* PWM Control Register */
+#define                         PWM_STAT  0xffc03704   /* PWM Status Register */
+#define                           PWM_TM  0xffc03708   /* PWM Period Register */
+#define                           PWM_DT  0xffc0370c   /* PWM Dead Time Register */
+#define                         PWM_GATE  0xffc03710   /* PWM Chopping Control */
+#define                          PWM_CHA  0xffc03714   /* PWM Channel A Duty Control */
+#define                          PWM_CHB  0xffc03718   /* PWM Channel B Duty Control */
+#define                          PWM_CHC  0xffc0371c   /* PWM Channel C Duty Control */
+#define                          PWM_SEG  0xffc03720   /* PWM Crossover and Output Enable */
+#define                       PWM_SYNCWT  0xffc03724   /* PWM Sync Pluse Width Control */
+#define                         PWM_CHAL  0xffc03728   /* PWM Channel AL Duty Control (SR mode only) */
+#define                         PWM_CHBL  0xffc0372c   /* PWM Channel BL Duty Control (SR mode only) */
+#define                         PWM_CHCL  0xffc03730   /* PWM Channel CL Duty Control (SR mode only) */
+#define                          PWM_LSI  0xffc03734   /* PWM Low Side Invert (SR mode only) */
+#define                        PWM_STAT2  0xffc03738   /* PWM Status Register 2 */
+
+
+/* ********************************************************** */
+/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
+/*     and MULTI BIT READ MACROS                              */
+/* ********************************************************** */
+
+/* Bit masks for HOST_CONTROL */
+
+#define                   HOST_CNTR_HOST_EN  0x1        /* Host Enable */
+#define                  HOST_CNTR_nHOST_EN  0x0
+#define                  HOST_CNTR_HOST_END  0x2        /* Host Endianess */
+#define                 HOST_CNTR_nHOST_END  0x0
+#define                 HOST_CNTR_DATA_SIZE  0x4        /* Data Size */
+#define                HOST_CNTR_nDATA_SIZE  0x0
+#define                  HOST_CNTR_HOST_RST  0x8        /* Host Reset */
+#define                 HOST_CNTR_nHOST_RST  0x0
+#define                  HOST_CNTR_HRDY_OVR  0x20       /* Host Ready Override */
+#define                 HOST_CNTR_nHRDY_OVR  0x0
+#define                  HOST_CNTR_INT_MODE  0x40       /* Interrupt Mode */
+#define                 HOST_CNTR_nINT_MODE  0x0
+#define                     HOST_CNTR_BT_EN  0x80       /* Bus Timeout Enable */
+#define                   HOST_CNTR_ nBT_EN  0x0
+#define                       HOST_CNTR_EHW  0x100      /* Enable Host Write */
+#define                      HOST_CNTR_nEHW  0x0
+#define                       HOST_CNTR_EHR  0x200      /* Enable Host Read */
+#define                      HOST_CNTR_nEHR  0x0
+#define                       HOST_CNTR_BDR  0x400      /* Burst DMA Requests */
+#define                      HOST_CNTR_nBDR  0x0
+
+/* Bit masks for HOST_STATUS */
+
+#define                     HOST_STAT_READY  0x1        /* DMA Ready */
+#define                    HOST_STAT_nREADY  0x0
+#define                  HOST_STAT_FIFOFULL  0x2        /* FIFO Full */
+#define                 HOST_STAT_nFIFOFULL  0x0
+#define                 HOST_STAT_FIFOEMPTY  0x4        /* FIFO Empty */
+#define                HOST_STAT_nFIFOEMPTY  0x0
+#define                  HOST_STAT_COMPLETE  0x8        /* DMA Complete */
+#define                 HOST_STAT_nCOMPLETE  0x0
+#define                      HOST_STAT_HSHK  0x10       /* Host Handshake */
+#define                     HOST_STAT_nHSHK  0x0
+#define                   HOST_STAT_TIMEOUT  0x20       /* Host Timeout */
+#define                  HOST_STAT_nTIMEOUT  0x0
+#define                      HOST_STAT_HIRQ  0x40       /* Host Interrupt Request */
+#define                     HOST_STAT_nHIRQ  0x0
+#define                HOST_STAT_ALLOW_CNFG  0x80       /* Allow New Configuration */
+#define               HOST_STAT_nALLOW_CNFG  0x0
+#define                   HOST_STAT_DMA_DIR  0x100      /* DMA Direction */
+#define                  HOST_STAT_nDMA_DIR  0x0
+#define                       HOST_STAT_BTE  0x200      /* Bus Timeout Enabled */
+#define                      HOST_STAT_nBTE  0x0
+#define               HOST_STAT_HOSTRD_DONE  0x8000     /* Host Read Completion Interrupt */
+#define              HOST_STAT_nHOSTRD_DONE  0x0
+
+/* Bit masks for HOST_TIMEOUT */
+
+#define             HOST_COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
+
+/* Bit masks for SECURE_SYSSWT */
+
+#define                   EMUDABL  0x1        /* Emulation Disable. */
+#define                  nEMUDABL  0x0
+#define                   RSTDABL  0x2        /* Reset Disable */
+#define                  nRSTDABL  0x0
+#define                   L1IDABL  0x1c       /* L1 Instruction Memory Disable. */
+#define                  L1DADABL  0xe0       /* L1 Data Bank A Memory Disable. */
+#define                  L1DBDABL  0x700      /* L1 Data Bank B Memory Disable. */
+#define                   DMA0OVR  0x800      /* DMA0 Memory Access Override */
+#define                  nDMA0OVR  0x0
+#define                   DMA1OVR  0x1000     /* DMA1 Memory Access Override */
+#define                  nDMA1OVR  0x0
+#define                    EMUOVR  0x4000     /* Emulation Override */
+#define                   nEMUOVR  0x0
+#define                    OTPSEN  0x8000     /* OTP Secrets Enable. */
+#define                   nOTPSEN  0x0
+#define                    L2DABL  0x70000    /* L2 Memory Disable. */
+
+/* Bit masks for SECURE_CONTROL */
+
+#define                   SECURE0  0x1        /* SECURE 0 */
+#define                  nSECURE0  0x0
+#define                   SECURE1  0x2        /* SECURE 1 */
+#define                  nSECURE1  0x0
+#define                   SECURE2  0x4        /* SECURE 2 */
+#define                  nSECURE2  0x0
+#define                   SECURE3  0x8        /* SECURE 3 */
+#define                  nSECURE3  0x0
+
+/* Bit masks for SECURE_STATUS */
+
+#define                   SECMODE  0x3        /* Secured Mode Control State */
+#define                       NMI  0x4        /* Non Maskable Interrupt */
+#define                      nNMI  0x0
+#define                   AFVALID  0x8        /* Authentication Firmware Valid */
+#define                  nAFVALID  0x0
+#define                    AFEXIT  0x10       /* Authentication Firmware Exit */
+#define                   nAFEXIT  0x0
+#define                   SECSTAT  0xe0       /* Secure Status */
+
+#endif /* _DEF_BF512_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/defBF514.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/defBF514.h
new file mode 100644
index 0000000..97feaa6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/defBF514.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF514_H
+#define _DEF_BF514_H
+
+/* BF514 is BF512 + RSI */
+#include "defBF512.h"
+
+/* Removable Storage Interface Registers */
+
+#define RSI_PWR_CONTROL                0xFFC03800 /* RSI Power Control Register */
+#define RSI_CLK_CONTROL                0xFFC03804 /* RSI Clock Control Register */
+#define RSI_ARGUMENT                   0xFFC03808 /* RSI Argument Register */
+#define RSI_COMMAND                    0xFFC0380C /* RSI Command Register */
+#define RSI_RESP_CMD                   0xFFC03810 /* RSI Response Command Register */
+#define RSI_RESPONSE0                  0xFFC03814 /* RSI Response Register */
+#define RSI_RESPONSE1                  0xFFC03818 /* RSI Response Register */
+#define RSI_RESPONSE2                  0xFFC0381C /* RSI Response Register */
+#define RSI_RESPONSE3                  0xFFC03820 /* RSI Response Register */
+#define RSI_DATA_TIMER                 0xFFC03824 /* RSI Data Timer Register */
+#define RSI_DATA_LGTH                  0xFFC03828 /* RSI Data Length Register */
+#define RSI_DATA_CONTROL               0xFFC0382C /* RSI Data Control Register */
+#define RSI_DATA_CNT                   0xFFC03830 /* RSI Data Counter Register */
+#define RSI_STATUS                     0xFFC03834 /* RSI Status Register */
+#define RSI_STATUSCL                   0xFFC03838 /* RSI Status Clear Register */
+#define RSI_MASK0                      0xFFC0383C /* RSI Interrupt 0 Mask Register */
+#define RSI_MASK1                      0xFFC03840 /* RSI Interrupt 1 Mask Register */
+#define RSI_FIFO_CNT                   0xFFC03848 /* RSI FIFO Counter Register */
+#define RSI_CEATA_CONTROL              0xFFC0384C /* RSI CEATA Register */
+#define RSI_FIFO                       0xFFC03880 /* RSI Data FIFO Register */
+#define RSI_ESTAT                      0xFFC038C0 /* RSI Exception Status Register */
+#define RSI_EMASK                      0xFFC038C4 /* RSI Exception Mask Register */
+#define RSI_CONFIG                     0xFFC038C8 /* RSI Configuration Register */
+#define RSI_RD_WAIT_EN                 0xFFC038CC /* RSI Read Wait Enable Register */
+#define RSI_PID0                       0xFFC038D0 /* RSI Peripheral ID Register 0 */
+#define RSI_PID1                       0xFFC038D4 /* RSI Peripheral ID Register 1 */
+#define RSI_PID2                       0xFFC038D8 /* RSI Peripheral ID Register 2 */
+#define RSI_PID3                       0xFFC038DC /* RSI Peripheral ID Register 3 */
+#define RSI_PID4                       0xFFC038E0 /* RSI Peripheral ID Register 0 */
+#define RSI_PID5                       0xFFC038E4 /* RSI Peripheral ID Register 1 */
+#define RSI_PID6                       0xFFC038E8 /* RSI Peripheral ID Register 2 */
+#define RSI_PID7                       0xFFC038EC /* RSI Peripheral ID Register 3 */
+
+#endif /* _DEF_BF514_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/defBF516.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/defBF516.h
new file mode 100644
index 0000000..7c79cb6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/defBF516.h
@@ -0,0 +1,392 @@
+/*
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF516_H
+#define _DEF_BF516_H
+
+/* BF516 is BF514 + EMAC */
+#include "defBF514.h"
+
+/* The following are the #defines needed by ADSP-BF516 that are not in the common header */
+/* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF) */
+
+#define EMAC_OPMODE             0xFFC03000       /* Operating Mode Register                              */
+#define EMAC_ADDRLO             0xFFC03004       /* Address Low (32 LSBs) Register                       */
+#define EMAC_ADDRHI             0xFFC03008       /* Address High (16 MSBs) Register                      */
+#define EMAC_HASHLO             0xFFC0300C       /* Multicast Hash Table Low (Bins 31-0) Register        */
+#define EMAC_HASHHI             0xFFC03010       /* Multicast Hash Table High (Bins 63-32) Register      */
+#define EMAC_STAADD             0xFFC03014       /* Station Management Address Register                  */
+#define EMAC_STADAT             0xFFC03018       /* Station Management Data Register                     */
+#define EMAC_FLC                0xFFC0301C       /* Flow Control Register                                */
+#define EMAC_VLAN1              0xFFC03020       /* VLAN1 Tag Register                                   */
+#define EMAC_VLAN2              0xFFC03024       /* VLAN2 Tag Register                                   */
+#define EMAC_WKUP_CTL           0xFFC0302C       /* Wake-Up Control/Status Register                      */
+#define EMAC_WKUP_FFMSK0        0xFFC03030       /* Wake-Up Frame Filter 0 Byte Mask Register            */
+#define EMAC_WKUP_FFMSK1        0xFFC03034       /* Wake-Up Frame Filter 1 Byte Mask Register            */
+#define EMAC_WKUP_FFMSK2        0xFFC03038       /* Wake-Up Frame Filter 2 Byte Mask Register            */
+#define EMAC_WKUP_FFMSK3        0xFFC0303C       /* Wake-Up Frame Filter 3 Byte Mask Register            */
+#define EMAC_WKUP_FFCMD         0xFFC03040       /* Wake-Up Frame Filter Commands Register               */
+#define EMAC_WKUP_FFOFF         0xFFC03044       /* Wake-Up Frame Filter Offsets Register                */
+#define EMAC_WKUP_FFCRC0        0xFFC03048       /* Wake-Up Frame Filter 0,1 CRC-16 Register             */
+#define EMAC_WKUP_FFCRC1        0xFFC0304C       /* Wake-Up Frame Filter 2,3 CRC-16 Register             */
+
+#define EMAC_SYSCTL             0xFFC03060       /* EMAC System Control Register                         */
+#define EMAC_SYSTAT             0xFFC03064       /* EMAC System Status Register                          */
+#define EMAC_RX_STAT            0xFFC03068       /* RX Current Frame Status Register                     */
+#define EMAC_RX_STKY            0xFFC0306C       /* RX Sticky Frame Status Register                      */
+#define EMAC_RX_IRQE            0xFFC03070       /* RX Frame Status Interrupt Enables Register           */
+#define EMAC_TX_STAT            0xFFC03074       /* TX Current Frame Status Register                     */
+#define EMAC_TX_STKY            0xFFC03078       /* TX Sticky Frame Status Register                      */
+#define EMAC_TX_IRQE            0xFFC0307C       /* TX Frame Status Interrupt Enables Register           */
+
+#define EMAC_MMC_CTL            0xFFC03080       /* MMC Counter Control Register                         */
+#define EMAC_MMC_RIRQS          0xFFC03084       /* MMC RX Interrupt Status Register                     */
+#define EMAC_MMC_RIRQE          0xFFC03088       /* MMC RX Interrupt Enables Register                    */
+#define EMAC_MMC_TIRQS          0xFFC0308C       /* MMC TX Interrupt Status Register                     */
+#define EMAC_MMC_TIRQE          0xFFC03090       /* MMC TX Interrupt Enables Register                    */
+
+#define EMAC_RXC_OK             0xFFC03100       /* RX Frame Successful Count                            */
+#define EMAC_RXC_FCS            0xFFC03104       /* RX Frame FCS Failure Count                           */
+#define EMAC_RXC_ALIGN          0xFFC03108       /* RX Alignment Error Count                             */
+#define EMAC_RXC_OCTET          0xFFC0310C       /* RX Octets Successfully Received Count                */
+#define EMAC_RXC_DMAOVF         0xFFC03110       /* Internal MAC Sublayer Error RX Frame Count           */
+#define EMAC_RXC_UNICST         0xFFC03114       /* Unicast RX Frame Count                               */
+#define EMAC_RXC_MULTI          0xFFC03118       /* Multicast RX Frame Count                             */
+#define EMAC_RXC_BROAD          0xFFC0311C       /* Broadcast RX Frame Count                             */
+#define EMAC_RXC_LNERRI         0xFFC03120       /* RX Frame In Range Error Count                        */
+#define EMAC_RXC_LNERRO         0xFFC03124       /* RX Frame Out Of Range Error Count                    */
+#define EMAC_RXC_LONG           0xFFC03128       /* RX Frame Too Long Count                              */
+#define EMAC_RXC_MACCTL         0xFFC0312C       /* MAC Control RX Frame Count                           */
+#define EMAC_RXC_OPCODE         0xFFC03130       /* Unsupported Op-Code RX Frame Count                   */
+#define EMAC_RXC_PAUSE          0xFFC03134       /* MAC Control Pause RX Frame Count                     */
+#define EMAC_RXC_ALLFRM         0xFFC03138       /* Overall RX Frame Count                               */
+#define EMAC_RXC_ALLOCT         0xFFC0313C       /* Overall RX Octet Count                               */
+#define EMAC_RXC_TYPED          0xFFC03140       /* Type/Length Consistent RX Frame Count                */
+#define EMAC_RXC_SHORT          0xFFC03144       /* RX Frame Fragment Count - Byte Count x < 64          */
+#define EMAC_RXC_EQ64           0xFFC03148       /* Good RX Frame Count - Byte Count x = 64              */
+#define EMAC_RXC_LT128          0xFFC0314C       /* Good RX Frame Count - Byte Count  64 < x < 128       */
+#define EMAC_RXC_LT256          0xFFC03150       /* Good RX Frame Count - Byte Count 128 <= x < 256      */
+#define EMAC_RXC_LT512          0xFFC03154       /* Good RX Frame Count - Byte Count 256 <= x < 512      */
+#define EMAC_RXC_LT1024         0xFFC03158       /* Good RX Frame Count - Byte Count 512 <= x < 1024     */
+#define EMAC_RXC_GE1024         0xFFC0315C       /* Good RX Frame Count - Byte Count x >= 1024           */
+
+#define EMAC_TXC_OK             0xFFC03180       /* TX Frame Successful Count                             */
+#define EMAC_TXC_1COL           0xFFC03184       /* TX Frames Successful After Single Collision Count     */
+#define EMAC_TXC_GT1COL         0xFFC03188       /* TX Frames Successful After Multiple Collisions Count  */
+#define EMAC_TXC_OCTET          0xFFC0318C       /* TX Octets Successfully Received Count                 */
+#define EMAC_TXC_DEFER          0xFFC03190       /* TX Frame Delayed Due To Busy Count                    */
+#define EMAC_TXC_LATECL         0xFFC03194       /* Late TX Collisions Count                              */
+#define EMAC_TXC_XS_COL         0xFFC03198       /* TX Frame Failed Due To Excessive Collisions Count     */
+#define EMAC_TXC_DMAUND         0xFFC0319C       /* Internal MAC Sublayer Error TX Frame Count            */
+#define EMAC_TXC_CRSERR         0xFFC031A0       /* Carrier Sense Deasserted During TX Frame Count        */
+#define EMAC_TXC_UNICST         0xFFC031A4       /* Unicast TX Frame Count                                */
+#define EMAC_TXC_MULTI          0xFFC031A8       /* Multicast TX Frame Count                              */
+#define EMAC_TXC_BROAD          0xFFC031AC       /* Broadcast TX Frame Count                              */
+#define EMAC_TXC_XS_DFR         0xFFC031B0       /* TX Frames With Excessive Deferral Count               */
+#define EMAC_TXC_MACCTL         0xFFC031B4       /* MAC Control TX Frame Count                            */
+#define EMAC_TXC_ALLFRM         0xFFC031B8       /* Overall TX Frame Count                                */
+#define EMAC_TXC_ALLOCT         0xFFC031BC       /* Overall TX Octet Count                                */
+#define EMAC_TXC_EQ64           0xFFC031C0       /* Good TX Frame Count - Byte Count x = 64               */
+#define EMAC_TXC_LT128          0xFFC031C4       /* Good TX Frame Count - Byte Count  64 < x < 128        */
+#define EMAC_TXC_LT256          0xFFC031C8       /* Good TX Frame Count - Byte Count 128 <= x < 256       */
+#define EMAC_TXC_LT512          0xFFC031CC       /* Good TX Frame Count - Byte Count 256 <= x < 512       */
+#define EMAC_TXC_LT1024         0xFFC031D0       /* Good TX Frame Count - Byte Count 512 <= x < 1024      */
+#define EMAC_TXC_GE1024         0xFFC031D4       /* Good TX Frame Count - Byte Count x >= 1024            */
+#define EMAC_TXC_ABORT          0xFFC031D8       /* Total TX Frames Aborted Count                         */
+
+/* Listing for IEEE-Supported Count Registers */
+
+#define FramesReceivedOK                EMAC_RXC_OK        /* RX Frame Successful Count                            */
+#define FrameCheckSequenceErrors        EMAC_RXC_FCS       /* RX Frame FCS Failure Count                           */
+#define AlignmentErrors                 EMAC_RXC_ALIGN     /* RX Alignment Error Count                             */
+#define OctetsReceivedOK                EMAC_RXC_OCTET     /* RX Octets Successfully Received Count                */
+#define FramesLostDueToIntMACRcvError   EMAC_RXC_DMAOVF    /* Internal MAC Sublayer Error RX Frame Count           */
+#define UnicastFramesReceivedOK         EMAC_RXC_UNICST    /* Unicast RX Frame Count                               */
+#define MulticastFramesReceivedOK       EMAC_RXC_MULTI     /* Multicast RX Frame Count                             */
+#define BroadcastFramesReceivedOK       EMAC_RXC_BROAD     /* Broadcast RX Frame Count                             */
+#define InRangeLengthErrors             EMAC_RXC_LNERRI    /* RX Frame In Range Error Count                        */
+#define OutOfRangeLengthField           EMAC_RXC_LNERRO    /* RX Frame Out Of Range Error Count                    */
+#define FrameTooLongErrors              EMAC_RXC_LONG      /* RX Frame Too Long Count                              */
+#define MACControlFramesReceived        EMAC_RXC_MACCTL    /* MAC Control RX Frame Count                           */
+#define UnsupportedOpcodesReceived      EMAC_RXC_OPCODE    /* Unsupported Op-Code RX Frame Count                   */
+#define PAUSEMACCtrlFramesReceived      EMAC_RXC_PAUSE     /* MAC Control Pause RX Frame Count                     */
+#define FramesReceivedAll               EMAC_RXC_ALLFRM    /* Overall RX Frame Count                               */
+#define OctetsReceivedAll               EMAC_RXC_ALLOCT    /* Overall RX Octet Count                               */
+#define TypedFramesReceived             EMAC_RXC_TYPED     /* Type/Length Consistent RX Frame Count                */
+#define FramesLenLt64Received           EMAC_RXC_SHORT     /* RX Frame Fragment Count - Byte Count x < 64          */
+#define FramesLenEq64Received           EMAC_RXC_EQ64      /* Good RX Frame Count - Byte Count x = 64              */
+#define FramesLen65_127Received         EMAC_RXC_LT128     /* Good RX Frame Count - Byte Count  64 < x < 128       */
+#define FramesLen128_255Received        EMAC_RXC_LT256     /* Good RX Frame Count - Byte Count 128 <= x < 256      */
+#define FramesLen256_511Received        EMAC_RXC_LT512     /* Good RX Frame Count - Byte Count 256 <= x < 512      */
+#define FramesLen512_1023Received       EMAC_RXC_LT1024    /* Good RX Frame Count - Byte Count 512 <= x < 1024     */
+#define FramesLen1024_MaxReceived       EMAC_RXC_GE1024    /* Good RX Frame Count - Byte Count x >= 1024           */
+
+#define FramesTransmittedOK             EMAC_TXC_OK        /* TX Frame Successful Count                            */
+#define SingleCollisionFrames           EMAC_TXC_1COL      /* TX Frames Successful After Single Collision Count    */
+#define MultipleCollisionFrames         EMAC_TXC_GT1COL    /* TX Frames Successful After Multiple Collisions Count */
+#define OctetsTransmittedOK             EMAC_TXC_OCTET     /* TX Octets Successfully Received Count                */
+#define FramesWithDeferredXmissions     EMAC_TXC_DEFER     /* TX Frame Delayed Due To Busy Count                   */
+#define LateCollisions                  EMAC_TXC_LATECL    /* Late TX Collisions Count                             */
+#define FramesAbortedDueToXSColls       EMAC_TXC_XS_COL    /* TX Frame Failed Due To Excessive Collisions Count    */
+#define FramesLostDueToIntMacXmitError  EMAC_TXC_DMAUND    /* Internal MAC Sublayer Error TX Frame Count           */
+#define CarrierSenseErrors              EMAC_TXC_CRSERR    /* Carrier Sense Deasserted During TX Frame Count       */
+#define UnicastFramesXmittedOK          EMAC_TXC_UNICST    /* Unicast TX Frame Count                               */
+#define MulticastFramesXmittedOK        EMAC_TXC_MULTI     /* Multicast TX Frame Count                             */
+#define BroadcastFramesXmittedOK        EMAC_TXC_BROAD     /* Broadcast TX Frame Count                             */
+#define FramesWithExcessiveDeferral     EMAC_TXC_XS_DFR    /* TX Frames With Excessive Deferral Count              */
+#define MACControlFramesTransmitted     EMAC_TXC_MACCTL    /* MAC Control TX Frame Count                           */
+#define FramesTransmittedAll            EMAC_TXC_ALLFRM    /* Overall TX Frame Count                               */
+#define OctetsTransmittedAll            EMAC_TXC_ALLOCT    /* Overall TX Octet Count                               */
+#define FramesLenEq64Transmitted        EMAC_TXC_EQ64      /* Good TX Frame Count - Byte Count x = 64              */
+#define FramesLen65_127Transmitted      EMAC_TXC_LT128     /* Good TX Frame Count - Byte Count  64 < x < 128       */
+#define FramesLen128_255Transmitted     EMAC_TXC_LT256     /* Good TX Frame Count - Byte Count 128 <= x < 256      */
+#define FramesLen256_511Transmitted     EMAC_TXC_LT512     /* Good TX Frame Count - Byte Count 256 <= x < 512      */
+#define FramesLen512_1023Transmitted    EMAC_TXC_LT1024    /* Good TX Frame Count - Byte Count 512 <= x < 1024     */
+#define FramesLen1024_MaxTransmitted    EMAC_TXC_GE1024    /* Good TX Frame Count - Byte Count x >= 1024           */
+#define TxAbortedFrames                 EMAC_TXC_ABORT     /* Total TX Frames Aborted Count                        */
+
+/***********************************************************************************
+** System MMR Register Bits And Macros
+**
+** Disclaimer:	All macros are intended to make C and Assembly code more readable.
+**				Use these macros carefully, as any that do left shifts for field
+**				depositing will result in the lower order bits being destroyed.  Any
+**				macro that shifts left to properly position the bit-field should be
+**				used as part of an OR to initialize a register and NOT as a dynamic
+**				modifier UNLESS the lower order bits are saved and ORed back in when
+**				the macro is used.
+*************************************************************************************/
+
+/************************  ETHERNET 10/100 CONTROLLER MASKS  ************************/
+
+/* EMAC_OPMODE Masks */
+
+#define	RE                 0x00000001     /* Receiver Enable                                    */
+#define	ASTP               0x00000002     /* Enable Automatic Pad Stripping On RX Frames        */
+#define	HU                 0x00000010     /* Hash Filter Unicast Address                        */
+#define	HM                 0x00000020     /* Hash Filter Multicast Address                      */
+#define	PAM                0x00000040     /* Pass-All-Multicast Mode Enable                     */
+#define	PR                 0x00000080     /* Promiscuous Mode Enable                            */
+#define	IFE                0x00000100     /* Inverse Filtering Enable                           */
+#define	DBF                0x00000200     /* Disable Broadcast Frame Reception                  */
+#define	PBF                0x00000400     /* Pass Bad Frames Enable                             */
+#define	PSF                0x00000800     /* Pass Short Frames Enable                           */
+#define	RAF                0x00001000     /* Receive-All Mode                                   */
+#define	TE                 0x00010000     /* Transmitter Enable                                 */
+#define	DTXPAD             0x00020000     /* Disable Automatic TX Padding                       */
+#define	DTXCRC             0x00040000     /* Disable Automatic TX CRC Generation                */
+#define	DC                 0x00080000     /* Deferral Check                                     */
+#define	BOLMT              0x00300000     /* Back-Off Limit                                     */
+#define	BOLMT_10           0x00000000     /*		10-bit range                            */
+#define	BOLMT_8            0x00100000     /*		8-bit range                             */
+#define	BOLMT_4            0x00200000     /*		4-bit range                             */
+#define	BOLMT_1            0x00300000     /*		1-bit range                             */
+#define	DRTY               0x00400000     /* Disable TX Retry On Collision                      */
+#define	LCTRE              0x00800000     /* Enable TX Retry On Late Collision                  */
+#define	RMII               0x01000000     /* RMII/MII* Mode                                     */
+#define	RMII_10            0x02000000     /* Speed Select for RMII Port (10MBit/100MBit*)       */
+#define	FDMODE             0x04000000     /* Duplex Mode Enable (Full/Half*)                    */
+#define	LB                 0x08000000     /* Internal Loopback Enable                           */
+#define	DRO                0x10000000     /* Disable Receive Own Frames (Half-Duplex Mode)      */
+
+/* EMAC_STAADD Masks */
+
+#define	STABUSY            0x00000001     /* Initiate Station Mgt Reg Access / STA Busy Stat    */
+#define	STAOP              0x00000002     /* Station Management Operation Code (Write/Read*)    */
+#define	STADISPRE          0x00000004     /* Disable Preamble Generation                        */
+#define	STAIE              0x00000008     /* Station Mgt. Transfer Done Interrupt Enable        */
+#define	REGAD              0x000007C0     /* STA Register Address                               */
+#define	PHYAD              0x0000F800     /* PHY Device Address                                 */
+
+#define	SET_REGAD(x) (((x)&0x1F)<<  6 )   /* Set STA Register Address                           */
+#define	SET_PHYAD(x) (((x)&0x1F)<< 11 )   /* Set PHY Device Address                             */
+
+/* EMAC_STADAT Mask */
+
+#define	STADATA            0x0000FFFF     /* Station Management Data                            */
+
+/* EMAC_FLC Masks */
+
+#define	FLCBUSY            0x00000001     /* Send Flow Ctrl Frame / Flow Ctrl Busy Status       */
+#define	FLCE               0x00000002     /* Flow Control Enable                                */
+#define	PCF                0x00000004     /* Pass Control Frames                                */
+#define	BKPRSEN            0x00000008     /* Enable Backpressure                                */
+#define	FLCPAUSE           0xFFFF0000     /* Pause Time                                         */
+
+#define	SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time                                   */
+
+/* EMAC_WKUP_CTL Masks */
+
+#define	CAPWKFRM           0x00000001    /* Capture Wake-Up Frames                              */
+#define	MPKE               0x00000002    /* Magic Packet Enable                                 */
+#define	RWKE               0x00000004    /* Remote Wake-Up Frame Enable                         */
+#define	GUWKE              0x00000008    /* Global Unicast Wake Enable                          */
+#define	MPKS               0x00000020    /* Magic Packet Received Status                        */
+#define	RWKS               0x00000F00    /* Wake-Up Frame Received Status, Filters 3:0          */
+
+/* EMAC_WKUP_FFCMD Masks */
+
+#define	WF0_E              0x00000001    /* Enable Wake-Up Filter 0                              */
+#define	WF0_T              0x00000008    /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*)      */
+#define	WF1_E              0x00000100    /* Enable Wake-Up Filter 1                              */
+#define	WF1_T              0x00000800    /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*)      */
+#define	WF2_E              0x00010000    /* Enable Wake-Up Filter 2                              */
+#define	WF2_T              0x00080000    /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*)      */
+#define	WF3_E              0x01000000    /* Enable Wake-Up Filter 3                              */
+#define	WF3_T              0x08000000    /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*)      */
+
+/* EMAC_WKUP_FFOFF Masks */
+
+#define	WF0_OFF            0x000000FF    /* Wake-Up Filter 0 Pattern Offset                      */
+#define	WF1_OFF            0x0000FF00    /* Wake-Up Filter 1 Pattern Offset                      */
+#define	WF2_OFF            0x00FF0000    /* Wake-Up Filter 2 Pattern Offset                      */
+#define	WF3_OFF            0xFF000000    /* Wake-Up Filter 3 Pattern Offset                      */
+
+#define	SET_WF0_OFF(x) (((x)&0xFF)<<  0 ) /* Set Wake-Up Filter 0 Byte Offset                    */
+#define	SET_WF1_OFF(x) (((x)&0xFF)<<  8 ) /* Set Wake-Up Filter 1 Byte Offset                    */
+#define	SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset                    */
+#define	SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset                    */
+/* Set ALL Offsets */
+#define	SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
+
+/* EMAC_WKUP_FFCRC0 Masks */
+
+#define	WF0_CRC           0x0000FFFF    /* Wake-Up Filter 0 Pattern CRC                           */
+#define	WF1_CRC           0xFFFF0000    /* Wake-Up Filter 1 Pattern CRC                           */
+
+#define	SET_WF0_CRC(x) (((x)&0xFFFF)<<   0 ) /* Set Wake-Up Filter 0 Target CRC                   */
+#define	SET_WF1_CRC(x) (((x)&0xFFFF)<<  16 ) /* Set Wake-Up Filter 1 Target CRC                   */
+
+/* EMAC_WKUP_FFCRC1 Masks */
+
+#define	WF2_CRC           0x0000FFFF    /* Wake-Up Filter 2 Pattern CRC                           */
+#define	WF3_CRC           0xFFFF0000    /* Wake-Up Filter 3 Pattern CRC                           */
+
+#define	SET_WF2_CRC(x) (((x)&0xFFFF)<<   0 ) /* Set Wake-Up Filter 2 Target CRC                   */
+#define	SET_WF3_CRC(x) (((x)&0xFFFF)<<  16 ) /* Set Wake-Up Filter 3 Target CRC                   */
+
+/* EMAC_SYSCTL Masks */
+
+#define	PHYIE             0x00000001    /* PHY_INT Interrupt Enable                               */
+#define	RXDWA             0x00000002    /* Receive Frame DMA Word Alignment (Odd/Even*)           */
+#define	RXCKS             0x00000004    /* Enable RX Frame TCP/UDP Checksum Computation           */
+#define	TXDWA             0x00000010    /* Transmit Frame DMA Word Alignment (Odd/Even*)          */
+#define	MDCDIV            0x00003F00    /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))]            */
+
+#define	SET_MDCDIV(x) (((x)&0x3F)<< 8)   /* Set MDC Clock Divisor                                 */
+
+/* EMAC_SYSTAT Masks */
+
+#define	PHYINT            0x00000001    /* PHY_INT Interrupt Status                               */
+#define	MMCINT            0x00000002    /* MMC Counter Interrupt Status                           */
+#define	RXFSINT           0x00000004    /* RX Frame-Status Interrupt Status                       */
+#define	TXFSINT           0x00000008    /* TX Frame-Status Interrupt Status                       */
+#define	WAKEDET           0x00000010    /* Wake-Up Detected Status                                */
+#define	RXDMAERR          0x00000020    /* RX DMA Direction Error Status                          */
+#define	TXDMAERR          0x00000040    /* TX DMA Direction Error Status                          */
+#define	STMDONE           0x00000080    /* Station Mgt. Transfer Done Interrupt Status            */
+
+/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */
+
+#define	RX_FRLEN          0x000007FF    /* Frame Length In Bytes                                  */
+#define	RX_COMP           0x00001000    /* RX Frame Complete                                      */
+#define	RX_OK             0x00002000    /* RX Frame Received With No Errors                       */
+#define	RX_LONG           0x00004000    /* RX Frame Too Long Error                                */
+#define	RX_ALIGN          0x00008000    /* RX Frame Alignment Error                               */
+#define	RX_CRC            0x00010000    /* RX Frame CRC Error                                     */
+#define	RX_LEN            0x00020000    /* RX Frame Length Error                                  */
+#define	RX_FRAG           0x00040000    /* RX Frame Fragment Error                                */
+#define	RX_ADDR           0x00080000    /* RX Frame Address Filter Failed Error                   */
+#define	RX_DMAO           0x00100000    /* RX Frame DMA Overrun Error                             */
+#define	RX_PHY            0x00200000    /* RX Frame PHY Error                                     */
+#define	RX_LATE           0x00400000    /* RX Frame Late Collision Error                          */
+#define	RX_RANGE          0x00800000    /* RX Frame Length Field Out of Range Error               */
+#define	RX_MULTI          0x01000000    /* RX Multicast Frame Indicator                           */
+#define	RX_BROAD          0x02000000    /* RX Broadcast Frame Indicator                           */
+#define	RX_CTL            0x04000000    /* RX Control Frame Indicator                             */
+#define	RX_UCTL           0x08000000    /* Unsupported RX Control Frame Indicator                 */
+#define	RX_TYPE           0x10000000    /* RX Typed Frame Indicator                               */
+#define	RX_VLAN1          0x20000000    /* RX VLAN1 Frame Indicator                               */
+#define	RX_VLAN2          0x40000000    /* RX VLAN2 Frame Indicator                               */
+#define	RX_ACCEPT         0x80000000    /* RX Frame Accepted Indicator                            */
+
+/*  EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks  */
+
+#define	TX_COMP           0x00000001    /* TX Frame Complete                                      */
+#define	TX_OK             0x00000002    /* TX Frame Sent With No Errors                           */
+#define	TX_ECOLL          0x00000004    /* TX Frame Excessive Collision Error                     */
+#define	TX_LATE           0x00000008    /* TX Frame Late Collision Error                          */
+#define	TX_DMAU           0x00000010    /* TX Frame DMA Underrun Error (STAT)                     */
+#define	TX_MACE           0x00000010    /* Internal MAC Error Detected (STKY and IRQE)            */
+#define	TX_EDEFER         0x00000020    /* TX Frame Excessive Deferral Error                      */
+#define	TX_BROAD          0x00000040    /* TX Broadcast Frame Indicator                           */
+#define	TX_MULTI          0x00000080    /* TX Multicast Frame Indicator                           */
+#define	TX_CCNT           0x00000F00    /* TX Frame Collision Count                               */
+#define	TX_DEFER          0x00001000    /* TX Frame Deferred Indicator                            */
+#define	TX_CRS            0x00002000    /* TX Frame Carrier Sense Not Asserted Error              */
+#define	TX_LOSS           0x00004000    /* TX Frame Carrier Lost During TX Error                  */
+#define	TX_RETRY          0x00008000    /* TX Frame Successful After Retry                        */
+#define	TX_FRLEN          0x07FF0000    /* TX Frame Length (Bytes)                                */
+
+/* EMAC_MMC_CTL Masks */
+#define	RSTC              0x00000001    /* Reset All Counters                                     */
+#define	CROLL             0x00000002    /* Counter Roll-Over Enable                               */
+#define	CCOR              0x00000004    /* Counter Clear-On-Read Mode Enable                      */
+#define	MMCE              0x00000008    /* Enable MMC Counter Operation                           */
+
+/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */
+#define	RX_OK_CNT         0x00000001    /* RX Frames Received With No Errors                      */
+#define	RX_FCS_CNT        0x00000002    /* RX Frames W/Frame Check Sequence Errors                */
+#define	RX_ALIGN_CNT      0x00000004    /* RX Frames With Alignment Errors                        */
+#define	RX_OCTET_CNT      0x00000008    /* RX Octets Received OK                                  */
+#define	RX_LOST_CNT       0x00000010    /* RX Frames Lost Due To Internal MAC RX Error            */
+#define	RX_UNI_CNT        0x00000020    /* Unicast RX Frames Received OK                          */
+#define	RX_MULTI_CNT      0x00000040    /* Multicast RX Frames Received OK                        */
+#define	RX_BROAD_CNT      0x00000080    /* Broadcast RX Frames Received OK                        */
+#define	RX_IRL_CNT        0x00000100    /* RX Frames With In-Range Length Errors                  */
+#define	RX_ORL_CNT        0x00000200    /* RX Frames With Out-Of-Range Length Errors              */
+#define	RX_LONG_CNT       0x00000400    /* RX Frames With Frame Too Long Errors                   */
+#define	RX_MACCTL_CNT     0x00000800    /* MAC Control RX Frames Received                         */
+#define	RX_OPCODE_CTL     0x00001000    /* Unsupported Op-Code RX Frames Received                 */
+#define	RX_PAUSE_CNT      0x00002000    /* PAUSEMAC Control RX Frames Received                    */
+#define	RX_ALLF_CNT       0x00004000    /* All RX Frames Received                                 */
+#define	RX_ALLO_CNT       0x00008000    /* All RX Octets Received                                 */
+#define	RX_TYPED_CNT      0x00010000    /* Typed RX Frames Received                               */
+#define	RX_SHORT_CNT      0x00020000    /* RX Frame Fragments (< 64 Bytes) Received               */
+#define	RX_EQ64_CNT       0x00040000    /* 64-Byte RX Frames Received                             */
+#define	RX_LT128_CNT      0x00080000    /* 65-127-Byte RX Frames Received                         */
+#define	RX_LT256_CNT      0x00100000    /* 128-255-Byte RX Frames Received                        */
+#define	RX_LT512_CNT      0x00200000    /* 256-511-Byte RX Frames Received                        */
+#define	RX_LT1024_CNT     0x00400000    /* 512-1023-Byte RX Frames Received                       */
+#define	RX_GE1024_CNT     0x00800000    /* 1024-Max-Byte RX Frames Received                       */
+
+/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks  */
+
+#define	TX_OK_CNT         0x00000001    /* TX Frames Sent OK                                      */
+#define	TX_SCOLL_CNT      0x00000002    /* TX Frames With Single Collisions                       */
+#define	TX_MCOLL_CNT      0x00000004    /* TX Frames With Multiple Collisions                     */
+#define	TX_OCTET_CNT      0x00000008    /* TX Octets Sent OK                                      */
+#define	TX_DEFER_CNT      0x00000010    /* TX Frames With Deferred Transmission                   */
+#define	TX_LATE_CNT       0x00000020    /* TX Frames With Late Collisions                         */
+#define	TX_ABORTC_CNT     0x00000040    /* TX Frames Aborted Due To Excess Collisions             */
+#define	TX_LOST_CNT       0x00000080    /* TX Frames Lost Due To Internal MAC TX Error            */
+#define	TX_CRS_CNT        0x00000100    /* TX Frames With Carrier Sense Errors                    */
+#define	TX_UNI_CNT        0x00000200    /* Unicast TX Frames Sent                                 */
+#define	TX_MULTI_CNT      0x00000400    /* Multicast TX Frames Sent                               */
+#define	TX_BROAD_CNT      0x00000800    /* Broadcast TX Frames Sent                               */
+#define	TX_EXDEF_CTL      0x00001000    /* TX Frames With Excessive Deferral                      */
+#define	TX_MACCTL_CNT     0x00002000    /* MAC Control TX Frames Sent                             */
+#define	TX_ALLF_CNT       0x00004000    /* All TX Frames Sent                                     */
+#define	TX_ALLO_CNT       0x00008000    /* All TX Octets Sent                                     */
+#define	TX_EQ64_CNT       0x00010000    /* 64-Byte TX Frames Sent                                 */
+#define	TX_LT128_CNT      0x00020000    /* 65-127-Byte TX Frames Sent                             */
+#define	TX_LT256_CNT      0x00040000    /* 128-255-Byte TX Frames Sent                            */
+#define	TX_LT512_CNT      0x00080000    /* 256-511-Byte TX Frames Sent                            */
+#define	TX_LT1024_CNT     0x00100000    /* 512-1023-Byte TX Frames Sent                           */
+#define	TX_GE1024_CNT     0x00200000    /* 1024-Max-Byte TX Frames Sent                           */
+#define	TX_ABORT_CNT      0x00400000    /* TX Frames Aborted                                      */
+
+#endif /* _DEF_BF516_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/defBF518.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/defBF518.h
new file mode 100644
index 0000000..12042ff
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/defBF518.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF518_H
+#define _DEF_BF518_H
+
+/* BF518 is BF516 + IEEE-1588 */
+#include "defBF516.h"
+
+/* PTP TSYNC Registers */
+
+#define EMAC_PTP_CTL                   0xFFC030A0 /* PTP Block Control */
+#define EMAC_PTP_IE                    0xFFC030A4 /* PTP Block Interrupt Enable */
+#define EMAC_PTP_ISTAT                 0xFFC030A8 /* PTP Block Interrupt Status */
+#define EMAC_PTP_FOFF                  0xFFC030AC /* PTP Filter offset Register */
+#define EMAC_PTP_FV1                   0xFFC030B0 /* PTP Filter Value Register 1 */
+#define EMAC_PTP_FV2                   0xFFC030B4 /* PTP Filter Value Register 2 */
+#define EMAC_PTP_FV3                   0xFFC030B8 /* PTP Filter Value Register 3 */
+#define EMAC_PTP_ADDEND                0xFFC030BC /* PTP Addend for Frequency Compensation */
+#define EMAC_PTP_ACCR                  0xFFC030C0 /* PTP Accumulator for Frequency Compensation */
+#define EMAC_PTP_OFFSET                0xFFC030C4 /* PTP Time Offset Register */
+#define EMAC_PTP_TIMELO                0xFFC030C8 /* PTP Precision Clock Time Low */
+#define EMAC_PTP_TIMEHI                0xFFC030CC /* PTP Precision Clock Time High */
+#define EMAC_PTP_RXSNAPLO              0xFFC030D0 /* PTP Receive Snapshot Register Low */
+#define EMAC_PTP_RXSNAPHI              0xFFC030D4 /* PTP Receive Snapshot Register High */
+#define EMAC_PTP_TXSNAPLO              0xFFC030D8 /* PTP Transmit Snapshot Register Low */
+#define EMAC_PTP_TXSNAPHI              0xFFC030DC /* PTP Transmit Snapshot Register High */
+#define EMAC_PTP_ALARMLO               0xFFC030E0 /* PTP Alarm time Low */
+#define EMAC_PTP_ALARMHI               0xFFC030E4 /* PTP Alarm time High */
+#define EMAC_PTP_ID_OFF                0xFFC030E8 /* PTP Capture ID offset register */
+#define EMAC_PTP_ID_SNAP               0xFFC030EC /* PTP Capture ID register */
+#define EMAC_PTP_PPS_STARTLO           0xFFC030F0 /* PPS Start Time Low */
+#define EMAC_PTP_PPS_STARTHI           0xFFC030F4 /* PPS Start Time High */
+#define EMAC_PTP_PPS_PERIOD            0xFFC030F8 /* PPS Count Register */
+
+/* Bit masks for EMAC_PTP_CTL */
+
+#define                    PTP_EN  0x1        /* Enable the PTP_TSYNC module */
+#define                        TL  0x2        /* Timestamp lock control */
+#define                      ASEN  0x10       /* Auxiliary snapshot control */
+#define                     PPSEN  0x80       /* Pulse-per-second (PPS) control */
+#define                     CKOEN  0x2000     /* Clock output control */
+
+/* Bit masks for EMAC_PTP_IE */
+
+#define                      ALIE  0x1        /* Alarm interrupt enable */
+#define                     RXEIE  0x2        /* Receive event interrupt enable */
+#define                     RXGIE  0x4        /* Receive general interrupt enable */
+#define                      TXIE  0x8        /* Transmit interrupt enable */
+#define                     RXOVE  0x10       /* Receive overrun error interrupt enable */
+#define                     TXOVE  0x20       /* Transmit overrun error interrupt enable */
+#define                      ASIE  0x40       /* Auxiliary snapshot interrupt enable */
+
+/* Bit masks for EMAC_PTP_ISTAT */
+
+#define                       ALS  0x1        /* Alarm status */
+#define                      RXEL  0x2        /* Receive event interrupt status */
+#define                      RXGL  0x4        /* Receive general interrupt status */
+#define                      TXTL  0x8        /* Transmit snapshot status */
+#define                      RXOV  0x10       /* Receive snapshot overrun status */
+#define                      TXOV  0x20       /* Transmit snapshot overrun status */
+#define                       ASL  0x40       /* Auxiliary snapshot interrupt status */
+
+#endif /* _DEF_BF518_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/dma.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/dma.h
new file mode 100644
index 0000000..bbd33c1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/dma.h
@@ -0,0 +1,33 @@
+/* mach/dma.h - arch-specific DMA defines
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define MAX_DMA_CHANNELS 16
+
+#define CH_PPI 			0	/* PPI receive/transmit */
+#define CH_EMAC_RX 		1	/* Ethernet MAC receive */
+#define CH_EMAC_TX 		2	/* Ethernet MAC transmit */
+#define CH_SPORT0_RX 		3	/* SPORT0 receive */
+#define CH_SPORT0_TX 		4	/* SPORT0 transmit */
+#define CH_RSI 			4	/* RSI */
+#define CH_SPORT1_RX 		5	/* SPORT1 receive */
+#define CH_SPI1 		5	/* SPI1 transmit/receive */
+#define CH_SPORT1_TX 		6	/* SPORT1 transmit */
+#define CH_SPI0 		7	/* SPI0 transmit/receive */
+#define CH_UART0_RX 		8	/* UART0 receive */
+#define CH_UART0_TX 		9	/* UART0 transmit */
+#define CH_UART1_RX 		10	/* UART1 receive */
+#define CH_UART1_TX 		11	/* UART1 transmit */
+
+#define CH_MEM_STREAM0_SRC 	12	/* RX */
+#define CH_MEM_STREAM0_DEST	13	/* TX */
+#define CH_MEM_STREAM1_SRC 	14	/* RX */
+#define CH_MEM_STREAM1_DEST	15	/* TX */
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/gpio.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/gpio.h
new file mode 100644
index 0000000..b480705
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/gpio.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define MAX_BLACKFIN_GPIOS 41
+
+#define GPIO_PF0	0
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+#define GPIO_PG0	16
+#define GPIO_PG1	17
+#define GPIO_PG2	18
+#define GPIO_PG3	19
+#define GPIO_PG4	20
+#define GPIO_PG5	21
+#define GPIO_PG6	22
+#define GPIO_PG7	23
+#define GPIO_PG8	24
+#define GPIO_PG9	25
+#define GPIO_PG10	26
+#define GPIO_PG11	27
+#define GPIO_PG12	28
+#define GPIO_PG13	29
+#define GPIO_PG14	30
+#define GPIO_PG15	31
+#define GPIO_PH0	32
+#define GPIO_PH1	33
+#define GPIO_PH2	34
+#define GPIO_PH3	35
+#define GPIO_PH4	36
+#define GPIO_PH5	37
+#define GPIO_PH6	38
+#define GPIO_PH7	39
+#define GPIO_PH8	40
+
+#define PORT_F GPIO_PF0
+#define PORT_G GPIO_PG0
+#define PORT_H GPIO_PH0
+
+#include <mach-common/ports-f.h>
+#include <mach-common/ports-g.h>
+#include <mach-common/ports-h.h>
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/irq.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/irq.h
new file mode 100644
index 0000000..edf8efd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/irq.h
@@ -0,0 +1,205 @@
+/*
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _BF518_IRQ_H_
+#define _BF518_IRQ_H_
+
+#include <mach-common/irq.h>
+
+#define NR_PERI_INTS		(2 * 32)
+
+#define IRQ_PLL_WAKEUP		BFIN_IRQ(0)	/* PLL Wakeup Interrupt */
+#define IRQ_DMA0_ERROR		BFIN_IRQ(1)	/* DMA Error 0 (generic) */
+#define IRQ_DMAR0_BLK		BFIN_IRQ(2)	/* DMAR0 Block Interrupt */
+#define IRQ_DMAR1_BLK		BFIN_IRQ(3)	/* DMAR1 Block Interrupt */
+#define IRQ_DMAR0_OVR		BFIN_IRQ(4)	/* DMAR0 Overflow Error */
+#define IRQ_DMAR1_OVR		BFIN_IRQ(5)	/* DMAR1 Overflow Error */
+#define IRQ_PPI_ERROR		BFIN_IRQ(6)	/* PPI Error */
+#define IRQ_MAC_ERROR		BFIN_IRQ(7)	/* MAC Status */
+#define IRQ_SPORT0_ERROR	BFIN_IRQ(8)	/* SPORT0 Status */
+#define IRQ_SPORT1_ERROR	BFIN_IRQ(9)	/* SPORT1 Status */
+#define IRQ_PTP_ERROR		BFIN_IRQ(10)	/* PTP Error Interrupt */
+#define IRQ_UART0_ERROR		BFIN_IRQ(12)	/* UART0 Status */
+#define IRQ_UART1_ERROR		BFIN_IRQ(13)	/* UART1 Status */
+#define IRQ_RTC			BFIN_IRQ(14)	/* RTC */
+#define IRQ_PPI			BFIN_IRQ(15)	/* DMA Channel 0 (PPI) */
+#define IRQ_SPORT0_RX		BFIN_IRQ(16)	/* DMA 3 Channel (SPORT0 RX) */
+#define IRQ_SPORT0_TX		BFIN_IRQ(17)	/* DMA 4 Channel (SPORT0 TX) */
+#define IRQ_RSI			BFIN_IRQ(17)	/* DMA 4 Channel (RSI) */
+#define IRQ_SPORT1_RX		BFIN_IRQ(18)	/* DMA 5 Channel (SPORT1 RX/SPI) */
+#define IRQ_SPI1		BFIN_IRQ(18)	/* DMA 5 Channel (SPI1) */
+#define IRQ_SPORT1_TX		BFIN_IRQ(19)	/* DMA 6 Channel (SPORT1 TX) */
+#define IRQ_TWI			BFIN_IRQ(20)	/* TWI */
+#define IRQ_SPI0		BFIN_IRQ(21)	/* DMA 7 Channel (SPI0) */
+#define IRQ_UART0_RX		BFIN_IRQ(22)	/* DMA8 Channel (UART0 RX) */
+#define IRQ_UART0_TX		BFIN_IRQ(23)	/* DMA9 Channel (UART0 TX) */
+#define IRQ_UART1_RX		BFIN_IRQ(24)	/* DMA10 Channel (UART1 RX) */
+#define IRQ_UART1_TX		BFIN_IRQ(25)	/* DMA11 Channel (UART1 TX) */
+#define IRQ_OPTSEC		BFIN_IRQ(26)	/* OTPSEC Interrupt */
+#define IRQ_CNT			BFIN_IRQ(27)	/* GP Counter */
+#define IRQ_MAC_RX		BFIN_IRQ(28)	/* DMA1 Channel (MAC RX) */
+#define IRQ_PORTH_INTA		BFIN_IRQ(29)	/* Port H Interrupt A */
+#define IRQ_MAC_TX		BFIN_IRQ(30)	/* DMA2 Channel (MAC TX) */
+#define IRQ_PORTH_INTB		BFIN_IRQ(31)	/* Port H Interrupt B */
+#define IRQ_TIMER0		BFIN_IRQ(32)	/* Timer 0 */
+#define IRQ_TIMER1		BFIN_IRQ(33)	/* Timer 1 */
+#define IRQ_TIMER2		BFIN_IRQ(34)	/* Timer 2 */
+#define IRQ_TIMER3		BFIN_IRQ(35)	/* Timer 3 */
+#define IRQ_TIMER4		BFIN_IRQ(36)	/* Timer 4 */
+#define IRQ_TIMER5		BFIN_IRQ(37)	/* Timer 5 */
+#define IRQ_TIMER6		BFIN_IRQ(38)	/* Timer 6 */
+#define IRQ_TIMER7		BFIN_IRQ(39)	/* Timer 7 */
+#define IRQ_PORTG_INTA		BFIN_IRQ(40)	/* Port G Interrupt A */
+#define IRQ_PORTG_INTB		BFIN_IRQ(41)	/* Port G Interrupt B */
+#define IRQ_MEM_DMA0		BFIN_IRQ(42)	/* MDMA Stream 0 */
+#define IRQ_MEM_DMA1		BFIN_IRQ(43)	/* MDMA Stream 1 */
+#define IRQ_WATCH		BFIN_IRQ(44)	/* Software Watchdog Timer */
+#define IRQ_PORTF_INTA		BFIN_IRQ(45)	/* Port F Interrupt A */
+#define IRQ_PORTF_INTB		BFIN_IRQ(46)	/* Port F Interrupt B */
+#define IRQ_SPI0_ERROR		BFIN_IRQ(47)	/* SPI0 Status */
+#define IRQ_SPI1_ERROR		BFIN_IRQ(48)	/* SPI1 Error */
+#define IRQ_RSI_INT0		BFIN_IRQ(51)	/* RSI Interrupt0 */
+#define IRQ_RSI_INT1		BFIN_IRQ(52)	/* RSI Interrupt1 */
+#define IRQ_PWM_TRIP		BFIN_IRQ(53)	/* PWM Trip Interrupt */
+#define IRQ_PWM_SYNC		BFIN_IRQ(54)	/* PWM Sync Interrupt */
+#define IRQ_PTP_STAT		BFIN_IRQ(55)	/* PTP Stat Interrupt */
+
+#define SYS_IRQS		BFIN_IRQ(63)	/* 70 */
+
+#define IRQ_PF0			71
+#define IRQ_PF1			72
+#define IRQ_PF2			73
+#define IRQ_PF3			74
+#define IRQ_PF4			75
+#define IRQ_PF5			76
+#define IRQ_PF6			77
+#define IRQ_PF7			78
+#define IRQ_PF8			79
+#define IRQ_PF9			80
+#define IRQ_PF10		81
+#define IRQ_PF11		82
+#define IRQ_PF12		83
+#define IRQ_PF13		84
+#define IRQ_PF14		85
+#define IRQ_PF15		86
+
+#define IRQ_PG0			87
+#define IRQ_PG1			88
+#define IRQ_PG2			89
+#define IRQ_PG3			90
+#define IRQ_PG4			91
+#define IRQ_PG5			92
+#define IRQ_PG6			93
+#define IRQ_PG7			94
+#define IRQ_PG8			95
+#define IRQ_PG9			96
+#define IRQ_PG10		97
+#define IRQ_PG11		98
+#define IRQ_PG12		99
+#define IRQ_PG13		100
+#define IRQ_PG14		101
+#define IRQ_PG15		102
+
+#define IRQ_PH0			103
+#define IRQ_PH1			104
+#define IRQ_PH2			105
+#define IRQ_PH3			106
+#define IRQ_PH4			107
+#define IRQ_PH5			108
+#define IRQ_PH6			109
+#define IRQ_PH7			110
+#define IRQ_PH8			111
+#define IRQ_PH9			112
+#define IRQ_PH10		113
+#define IRQ_PH11		114
+#define IRQ_PH12		115
+#define IRQ_PH13		116
+#define IRQ_PH14		117
+#define IRQ_PH15		118
+
+#define GPIO_IRQ_BASE		IRQ_PF0
+
+#define IRQ_MAC_PHYINT		119	/* PHY_INT Interrupt */
+#define IRQ_MAC_MMCINT		120	/* MMC Counter Interrupt */
+#define IRQ_MAC_RXFSINT		121	/* RX Frame-Status Interrupt */
+#define IRQ_MAC_TXFSINT		122	/* TX Frame-Status Interrupt */
+#define IRQ_MAC_WAKEDET		123	/* Wake-Up Interrupt */
+#define IRQ_MAC_RXDMAERR	124	/* RX DMA Direction Error Interrupt */
+#define IRQ_MAC_TXDMAERR	125	/* TX DMA Direction Error Interrupt */
+#define IRQ_MAC_STMDONE		126	/* Station Mgt. Transfer Done Interrupt */
+
+#define NR_MACH_IRQS		(IRQ_MAC_STMDONE + 1)
+
+/* IAR0 BIT FIELDS */
+#define IRQ_PLL_WAKEUP_POS	0
+#define IRQ_DMA0_ERROR_POS	4
+#define IRQ_DMAR0_BLK_POS	8
+#define IRQ_DMAR1_BLK_POS	12
+#define IRQ_DMAR0_OVR_POS	16
+#define IRQ_DMAR1_OVR_POS	20
+#define IRQ_PPI_ERROR_POS	24
+#define IRQ_MAC_ERROR_POS	28
+
+/* IAR1 BIT FIELDS */
+#define IRQ_SPORT0_ERROR_POS	0
+#define IRQ_SPORT1_ERROR_POS	4
+#define IRQ_PTP_ERROR_POS	8
+#define IRQ_UART0_ERROR_POS	16
+#define IRQ_UART1_ERROR_POS	20
+#define IRQ_RTC_POS		24
+#define IRQ_PPI_POS		28
+
+/* IAR2 BIT FIELDS */
+#define IRQ_SPORT0_RX_POS	0
+#define IRQ_SPORT0_TX_POS	4
+#define IRQ_RSI_POS		4
+#define IRQ_SPORT1_RX_POS	8
+#define IRQ_SPI1_POS		8
+#define IRQ_SPORT1_TX_POS	12
+#define IRQ_TWI_POS		16
+#define IRQ_SPI0_POS		20
+#define IRQ_UART0_RX_POS	24
+#define IRQ_UART0_TX_POS	28
+
+/* IAR3 BIT FIELDS */
+#define IRQ_UART1_RX_POS	0
+#define IRQ_UART1_TX_POS	4
+#define IRQ_OPTSEC_POS		8
+#define IRQ_CNT_POS		12
+#define IRQ_MAC_RX_POS		16
+#define IRQ_PORTH_INTA_POS	20
+#define IRQ_MAC_TX_POS		24
+#define IRQ_PORTH_INTB_POS	28
+
+/* IAR4 BIT FIELDS */
+#define IRQ_TIMER0_POS		0
+#define IRQ_TIMER1_POS		4
+#define IRQ_TIMER2_POS		8
+#define IRQ_TIMER3_POS		12
+#define IRQ_TIMER4_POS		16
+#define IRQ_TIMER5_POS		20
+#define IRQ_TIMER6_POS		24
+#define IRQ_TIMER7_POS		28
+
+/* IAR5 BIT FIELDS */
+#define IRQ_PORTG_INTA_POS	0
+#define IRQ_PORTG_INTB_POS	4
+#define IRQ_MEM_DMA0_POS	8
+#define IRQ_MEM_DMA1_POS	12
+#define IRQ_WATCH_POS		16
+#define IRQ_PORTF_INTA_POS	20
+#define IRQ_PORTF_INTB_POS	24
+#define IRQ_SPI0_ERROR_POS	28
+
+/* IAR6 BIT FIELDS */
+#define IRQ_SPI1_ERROR_POS	0
+#define IRQ_RSI_INT0_POS	12
+#define IRQ_RSI_INT1_POS	16
+#define IRQ_PWM_TRIP_POS	20
+#define IRQ_PWM_SYNC_POS	24
+#define IRQ_PTP_STAT_POS	28
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/mem_map.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/mem_map.h
new file mode 100644
index 0000000..073b5d7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/mem_map.h
@@ -0,0 +1,70 @@
+/*
+ * BF51x memory map
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
+
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0x20300000	/* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK2_BASE	0x20200000	/* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK1_BASE	0x20100000	/* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK0_BASE	0x20000000	/* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x00100000	/* 1M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x8000
+
+/* Level 1 Memory */
+
+/* Memory Map for ADSP-BF518/6/4/2 processors */
+
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE		(16 * 1024)
+#else
+#define BFIN_ICACHESIZE		(0)
+#endif
+
+#define L1_CODE_START		0xFFA00000
+#define L1_DATA_A_START		0xFF800000
+#define L1_DATA_B_START		0xFF900000
+
+#define L1_CODE_LENGTH		0x8000
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH	(0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH	0x8000
+#define BFIN_DCACHESIZE		(16 * 1024)
+#define BFIN_DSUPBANKS		1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH	(0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH	(0x8000 - 0x4000)
+#define BFIN_DCACHESIZE		(32 * 1024)
+#define BFIN_DSUPBANKS		2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH	0x8000
+#define L1_DATA_B_LENGTH	0x8000
+#define BFIN_DCACHESIZE		0
+#define BFIN_DSUPBANKS		0
+#endif				/*CONFIG_BFIN_DCACHE */
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/pll.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/pll.h
new file mode 100644
index 0000000..94cca67
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/pll.h
@@ -0,0 +1 @@
+#include <mach-common/pll.h>
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/portmux.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/portmux.h
new file mode 100644
index 0000000..b3b806f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/include/mach/portmux.h
@@ -0,0 +1,223 @@
+/*
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
+
+/* EMAC MII/RMII Port Mux */
+#define P_MII0_ETxD2	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
+#define P_MII0_ERxD2	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
+#define P_MII0_ETxD3	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
+#define P_MII0_ERxD3	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0))
+#define P_MII0_ERxCLK	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0))
+#define P_MII0_ERxDV	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0))
+#define P_MII0_COL	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0))
+
+#define P_MII0_MDC	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0))
+#define P_MII0_MDIO	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0))
+#define P_MII0_ETxD0	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0))
+#define P_MII0_ERxD0	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0))
+#define P_MII0_ETxD1	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0))
+#define P_MII0_ERxD1	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
+#define P_MII0_ETxEN	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
+#define P_MII0_PHYINT	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
+#define P_MII0_CRS	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
+#define P_MII0_ERxER	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+#define P_MII0_TxCLK	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0))
+
+#define P_MII0 {\
+	P_MII0_ETxD0, \
+	P_MII0_ETxD1, \
+	P_MII0_ETxD2, \
+	P_MII0_ETxD3, \
+	P_MII0_ETxEN, \
+	P_MII0_TxCLK, \
+	P_MII0_PHYINT, \
+	P_MII0_COL, \
+	P_MII0_ERxD0, \
+	P_MII0_ERxD1, \
+	P_MII0_ERxD2, \
+	P_MII0_ERxD3, \
+	P_MII0_ERxDV, \
+	P_MII0_ERxCLK, \
+	P_MII0_ERxER, \
+	P_MII0_CRS, \
+	P_MII0_MDC, \
+	P_MII0_MDIO, 0}
+
+#define P_RMII0 {\
+	P_MII0_ETxD0, \
+	P_MII0_ETxD1, \
+	P_MII0_ETxEN, \
+	P_MII0_ERxD0, \
+	P_MII0_ERxD1, \
+	P_MII0_ERxER, \
+	P_MII0_TxCLK, \
+	P_MII0_PHYINT, \
+	P_MII0_CRS, \
+	P_MII0_MDC, \
+	P_MII0_MDIO, 0}
+
+/* PPI Port Mux */
+#define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+#define P_PPI0_D1	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+#define P_PPI0_D2	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+#define P_PPI0_D3	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+#define P_PPI0_D4	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+#define P_PPI0_D5	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+#define P_PPI0_D6	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+#define P_PPI0_D7	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
+#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
+#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
+#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
+#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+
+#ifndef CONFIG_BF518_PPI_TMR_PG12
+#define P_PPI0_CLK	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1))
+#define P_PPI0_FS1	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1))
+#define P_PPI0_FS2	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1))
+#else
+#define P_PPI0_CLK	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1))
+#define P_PPI0_FS1	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1))
+#define P_PPI0_FS2	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1))
+#endif
+#define P_PPI0_FS3	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1))
+
+/* SPI Port Mux */
+#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0))
+#define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0))
+#define P_SPI0_MISO	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
+#define P_SPI0_MOSI	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
+
+#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
+#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
+#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2))
+#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(2))
+#define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2))
+
+#define P_SPI1_SS	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1))
+#define P_SPI1_SCK	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1))
+#define P_SPI1_MISO	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1))
+#define P_SPI1_MOSI	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(1))
+
+#define P_SPI1_SSEL1	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(2))
+#define P_SPI1_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(2))
+#define P_SPI1_SSEL3	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(2))
+#define P_SPI1_SSEL4	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2))
+#define P_SPI1_SSEL5	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2))
+
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PG15
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
+
+/* SPORT Port Mux */
+#define P_SPORT0_DRPRI	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
+#define P_SPORT0_RSCLK	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))
+#define P_SPORT0_RFS	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_SPORT0_TFS	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_SPORT0_DTPRI	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0))
+#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0))
+#define P_SPORT0_DTSEC	(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0))
+#define P_SPORT0_DRSEC	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0))
+
+#define P_SPORT1_DRPRI	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0))
+#define P_SPORT1_RFS	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0))
+#define P_SPORT1_RSCLK	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0))
+#define P_SPORT1_DTPRI	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0))
+#define P_SPORT1_TFS	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0))
+#define P_SPORT1_TSCLK	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0))
+#define P_SPORT1_DTSEC	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0))
+#define P_SPORT1_DRSEC	(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0))
+
+/* UART Port Mux */
+#define P_UART0_TX	(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1))
+#define P_UART0_RX	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1))
+
+#define P_UART1_TX	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1))
+#define P_UART1_RX	(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(1))
+
+/* Timer */
+#ifndef CONFIG_BF518_PPI_TMR_PG12
+#define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(2))
+#define P_TMR0		(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2))
+#define P_TMR1		(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2))
+#else
+#define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2))
+#define P_TMR0		(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2))
+#define P_TMR1		(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(2))
+#endif
+#define P_TMR2		(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(2))
+#define P_TMR3		(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(2))
+#define P_TMR4		(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(2))
+#define P_TMR5		(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(2))
+#define P_TMR6		(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(2))
+#define P_TMR7		(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(2))
+
+/* DMA */
+#define P_DMAR1		(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(1))
+#define P_DMAR0		(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1))
+
+/* TWI */
+#define P_TWI0_SCL	(P_DONTCARE)
+#define P_TWI0_SDA	(P_DONTCARE)
+
+/* PWM */
+#ifndef CONFIG_BF518_PWM_PORTF_PORTG
+#define P_PWM_AH		(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(2))
+#define P_PWM_AL		(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(2))
+#define P_PWM_BH		(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(2))
+#define P_PWM_BL		(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(2))
+#define P_PWM_CH		(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(2))
+#define P_PWM_CL		(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(2))
+#else
+#define P_PWM_AH		(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(2))
+#define P_PWM_AL		(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(2))
+#define P_PWM_BH		(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(2))
+#define P_PWM_BL		(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(2))
+#define P_PWM_CH		(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2))
+#define P_PWM_CL		(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2))
+#endif
+
+#ifndef CONFIG_BF518_PWM_SYNC_PF15
+#define P_PWM_SYNC		(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(2))
+#else
+#define P_PWM_SYNC		(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(2))
+#endif
+
+#ifndef CONFIG_BF518_PWM_TRIPB_PG14
+#define P_PWM_TRIPB		(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(2))
+#else
+#define P_PWM_TRIPB		(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(2))
+#endif
+
+/* RSI */
+#define P_RSI_DATA0		(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1))
+#define P_RSI_DATA1		(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
+#define P_RSI_DATA2		(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1))
+#define P_RSI_DATA3		(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1))
+#define P_RSI_DATA4		(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(2))
+#define P_RSI_DATA5		(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(2))
+#define P_RSI_DATA6		(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(2))
+#define P_RSI_DATA7		(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(2))
+#define P_RSI_CMD		(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1))
+#define P_RSI_CLK		(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1))
+
+/* PTP */
+#define P_PTP_PPS		(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2))
+#define P_PTP_CLKOUT		(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2))
+
+/* AMS */
+#define P_AMS2			(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_AMS3			(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2))
+
+#define P_HWAIT			(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(1))
+
+#endif				/* _MACH_PORTMUX_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/ints-priority.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/ints-priority.c
new file mode 100644
index 0000000..bb05bef
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf518/ints-priority.c
@@ -0,0 +1,78 @@
+/*
+ * Set up the interrupt priorities
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <asm/blackfin.h>
+
+void __init program_IAR(void)
+{
+	/* Program the IAR0 Register with the configured priority */
+	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
+			((CONFIG_IRQ_DMA0_ERROR - 7) << IRQ_DMA0_ERROR_POS) |
+			((CONFIG_IRQ_DMAR0_BLK - 7) << IRQ_DMAR0_BLK_POS) |
+			((CONFIG_IRQ_DMAR1_BLK - 7) << IRQ_DMAR1_BLK_POS) |
+			((CONFIG_IRQ_DMAR0_OVR - 7) << IRQ_DMAR0_OVR_POS) |
+			((CONFIG_IRQ_DMAR1_OVR - 7) << IRQ_DMAR1_OVR_POS) |
+			((CONFIG_IRQ_PPI_ERROR - 7) << IRQ_PPI_ERROR_POS) |
+			((CONFIG_IRQ_MAC_ERROR - 7) << IRQ_MAC_ERROR_POS));
+
+
+	bfin_write_SIC_IAR1(((CONFIG_IRQ_SPORT0_ERROR - 7) << IRQ_SPORT0_ERROR_POS) |
+			((CONFIG_IRQ_SPORT1_ERROR - 7) << IRQ_SPORT1_ERROR_POS) |
+			((CONFIG_IRQ_PTP_ERROR - 7) << IRQ_PTP_ERROR_POS) |
+			((CONFIG_IRQ_UART0_ERROR - 7) << IRQ_UART0_ERROR_POS) |
+			((CONFIG_IRQ_UART1_ERROR - 7) << IRQ_UART1_ERROR_POS) |
+			((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS) |
+			((CONFIG_IRQ_PPI - 7) << IRQ_PPI_POS));
+
+	bfin_write_SIC_IAR2(((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) |
+			((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) |
+			((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS) |
+			((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) |
+			((CONFIG_IRQ_TWI - 7) << IRQ_TWI_POS) |
+			((CONFIG_IRQ_SPI0 - 7) << IRQ_SPI0_POS) |
+			((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) |
+			((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS));
+
+	bfin_write_SIC_IAR3(((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) |
+			((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) |
+			((CONFIG_IRQ_OPTSEC - 7) << IRQ_OPTSEC_POS) |
+			((CONFIG_IRQ_CNT - 7) << IRQ_CNT_POS) |
+			((CONFIG_IRQ_MAC_RX - 7) << IRQ_MAC_RX_POS) |
+			((CONFIG_IRQ_PORTH_INTA - 7) << IRQ_PORTH_INTA_POS) |
+			((CONFIG_IRQ_MAC_TX - 7) << IRQ_MAC_TX_POS) |
+			((CONFIG_IRQ_PORTH_INTB - 7) << IRQ_PORTH_INTB_POS));
+
+	bfin_write_SIC_IAR4(((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
+			((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) |
+			((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
+			((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
+			((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS) |
+			((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
+			((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
+			((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS));
+
+	bfin_write_SIC_IAR5(((CONFIG_IRQ_PORTG_INTA - 7) << IRQ_PORTG_INTA_POS) |
+			((CONFIG_IRQ_PORTG_INTB - 7) << IRQ_PORTG_INTB_POS) |
+			((CONFIG_IRQ_MEM_DMA0 - 7) << IRQ_MEM_DMA0_POS) |
+			((CONFIG_IRQ_MEM_DMA1 - 7) << IRQ_MEM_DMA1_POS) |
+			((CONFIG_IRQ_WATCH - 7) << IRQ_WATCH_POS) |
+			((CONFIG_IRQ_PORTF_INTA - 7) << IRQ_PORTF_INTA_POS) |
+			((CONFIG_IRQ_PORTF_INTB - 7) << IRQ_PORTF_INTB_POS) |
+			((CONFIG_IRQ_SPI0_ERROR - 7) << IRQ_SPI0_ERROR_POS));
+
+	bfin_write_SIC_IAR6(((CONFIG_IRQ_SPI1_ERROR - 7) << IRQ_SPI1_ERROR_POS) |
+			((CONFIG_IRQ_RSI_INT0 - 7) << IRQ_RSI_INT0_POS) |
+			((CONFIG_IRQ_RSI_INT1 - 7) << IRQ_RSI_INT1_POS) |
+			((CONFIG_IRQ_PWM_TRIP - 7) << IRQ_PWM_TRIP_POS) |
+			((CONFIG_IRQ_PWM_SYNC - 7) << IRQ_PWM_SYNC_POS) |
+			((CONFIG_IRQ_PTP_STAT - 7) << IRQ_PTP_STAT_POS));
+
+	SSYNC();
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/Kconfig
new file mode 100644
index 0000000..6df20f9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/Kconfig
@@ -0,0 +1,325 @@
+# SPDX-License-Identifier: GPL-2.0
+config BF52x
+	def_bool y
+	depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
+
+if (BF52x)
+
+source "arch/blackfin/mach-bf527/boards/Kconfig"
+
+menu "BF527 Specific Configuration"
+
+comment "Alternative Multiplexing Scheme"
+
+choice
+	prompt "SPORT0"
+	default BF527_SPORT0_PORTG
+	help
+	  Select PORT used for SPORT0. See Hardware Reference Manual
+
+config BF527_SPORT0_PORTF
+	bool "PORT F"
+	help
+	  PORT F
+
+config BF527_SPORT0_PORTG
+	bool "PORT G"
+	help
+	  PORT G
+endchoice
+
+choice
+	prompt "SPORT0 TSCLK Location"
+	depends on BF527_SPORT0_PORTG
+	default BF527_SPORT0_TSCLK_PG10
+	help
+	  Select PIN used for SPORT0_TSCLK. See Hardware Reference Manual
+
+config BF527_SPORT0_TSCLK_PG10
+	bool "PORT PG10"
+	help
+	  PORT PG10
+
+config BF527_SPORT0_TSCLK_PG14
+	bool "PORT PG14"
+	help
+	  PORT PG14
+endchoice
+
+choice
+	prompt "UART1"
+	default BF527_UART1_PORTF
+	help
+	  Select PORT used for UART1. See Hardware Reference Manual
+
+config BF527_UART1_PORTF
+	bool "PORT F"
+	help
+	  PORT F
+
+config BF527_UART1_PORTG
+	bool "PORT G"
+	help
+	  PORT G
+endchoice
+
+choice
+	prompt "NAND (NFC) Data"
+	default BF527_NAND_D_PORTH
+	help
+	  Select PORT used for NAND Data Bus. See Hardware Reference Manual
+
+config BF527_NAND_D_PORTF
+	bool "PORT F"
+	help
+	  PORT F
+
+config BF527_NAND_D_PORTH
+	bool "PORT H"
+	help
+	  PORT H
+endchoice
+
+comment "Hysteresis/Schmitt Trigger Control"
+config BFIN_HYSTERESIS_CONTROL
+	bool "Enable Hysteresis Control"
+	help
+	  The ADSP-BF52x allows to control input hysteresis for Port F,
+	  Port G and Port H and other processor signal inputs.
+	  The Schmitt trigger enables can be set only for pin groups.
+	  Saying Y will overwrite the default reset or boot loader
+	  initialization.
+
+menu "PORT F"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTF_0_7
+	bool "Enable Hysteresis on PORTF {0...7}"
+config GPIO_HYST_PORTF_8_9
+	bool "Enable Hysteresis on PORTF {8, 9}"
+config GPIO_HYST_PORTF_10
+	bool "Enable Hysteresis on PORTF 10"
+config GPIO_HYST_PORTF_11
+	bool "Enable Hysteresis on PORTF 11"
+config GPIO_HYST_PORTF_12_13
+	bool "Enable Hysteresis on PORTF {12, 13}"
+config GPIO_HYST_PORTF_14_15
+	bool "Enable Hysteresis on PORTF {14, 15}"
+endmenu
+
+menu "PORT G"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTG_0
+	bool "Enable Hysteresis on PORTG 0"
+config GPIO_HYST_PORTG_1_4
+	bool "Enable Hysteresis on PORTG {1...4}"
+config GPIO_HYST_PORTG_5_6
+	bool "Enable Hysteresis on PORTG {5, 6}"
+config GPIO_HYST_PORTG_7_8
+	bool "Enable Hysteresis on PORTG {7, 8}"
+config GPIO_HYST_PORTG_9
+	bool "Enable Hysteresis on PORTG 9"
+config GPIO_HYST_PORTG_10
+	bool "Enable Hysteresis on PORTG 10"
+config GPIO_HYST_PORTG_11_13
+	bool "Enable Hysteresis on PORTG {11...13}"
+config GPIO_HYST_PORTG_14_15
+	bool "Enable Hysteresis on PORTG {14, 15}"
+endmenu
+
+menu "PORT H"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTH_0_7
+	bool "Enable Hysteresis on PORTH {0...7}"
+config GPIO_HYST_PORTH_8
+	bool "Enable Hysteresis on PORTH 8"
+config GPIO_HYST_PORTH_9_15
+	bool "Enable Hysteresis on PORTH {9...15}"
+endmenu
+
+menu "None-GPIO"
+	depends on BFIN_HYSTERESIS_CONTROL
+config NONEGPIO_HYST_TMR0_FS1_PPICLK
+	bool "Enable Hysteresis on {TMR0, PPI_FS1, PPI_CLK}"
+config NONEGPIO_HYST_NMI_RST_BMODE
+	bool "Enable Hysteresis on {NMI, RESET, BMODE}"
+config NONEGPIO_HYST_JTAG
+	bool "Enable Hysteresis on JTAG"
+endmenu
+
+comment "Interrupt Priority Assignment"
+menu "Priority"
+
+config IRQ_PLL_WAKEUP
+	int "IRQ_PLL_WAKEUP"
+	default 7
+config IRQ_DMA0_ERROR
+	int "IRQ_DMA0_ERROR"
+	default 7
+config IRQ_DMAR0_BLK
+	int "IRQ_DMAR0_BLK"
+	default 7
+config IRQ_DMAR1_BLK
+	int "IRQ_DMAR1_BLK"
+	default 7
+config IRQ_DMAR0_OVR
+	int "IRQ_DMAR0_OVR"
+	default 7
+config IRQ_DMAR1_OVR
+	int "IRQ_DMAR1_OVR"
+	default 7
+config IRQ_PPI_ERROR
+	int "IRQ_PPI_ERROR"
+	default 7
+config IRQ_MAC_ERROR
+	int "IRQ_MAC_ERROR"
+	default 7
+config IRQ_SPORT0_ERROR
+	int "IRQ_SPORT0_ERROR"
+	default 7
+config IRQ_SPORT1_ERROR
+	int "IRQ_SPORT1_ERROR"
+	default 7
+config IRQ_UART0_ERROR
+	int "IRQ_UART0_ERROR"
+	default 7
+config IRQ_UART1_ERROR
+	int "IRQ_UART1_ERROR"
+	default 7
+config IRQ_RTC
+	int "IRQ_RTC"
+	default 8
+config IRQ_PPI
+	int "IRQ_PPI"
+	default 8
+config IRQ_SPORT0_RX
+	int "IRQ_SPORT0_RX"
+	default 9
+config IRQ_SPORT0_TX
+	int "IRQ_SPORT0_TX"
+	default 9
+config IRQ_SPORT1_RX
+	int "IRQ_SPORT1_RX"
+	default 9
+config IRQ_SPORT1_TX
+	int "IRQ_SPORT1_TX"
+	default 9
+config IRQ_TWI
+	int "IRQ_TWI"
+	default 10
+config IRQ_SPI
+	int "IRQ_SPI"
+	default 10
+config IRQ_UART0_RX
+	int "IRQ_UART0_RX"
+	default 10
+config IRQ_UART0_TX
+	int "IRQ_UART0_TX"
+	default 10
+config IRQ_UART1_RX
+	int "IRQ_UART1_RX"
+	default 10
+config IRQ_UART1_TX
+	int "IRQ_UART1_TX"
+	default 10
+config IRQ_OPTSEC
+	int "IRQ_OPTSEC"
+	default 11
+config IRQ_CNT
+	int "IRQ_CNT"
+	default 11
+config IRQ_MAC_RX
+	int "IRQ_MAC_RX"
+	default 11
+config IRQ_PORTH_INTA
+	int "IRQ_PORTH_INTA"
+	default 11
+config IRQ_MAC_TX
+	int "IRQ_MAC_TX/NFC"
+	default 11
+config IRQ_PORTH_INTB
+	int "IRQ_PORTH_INTB"
+	default 11
+config IRQ_TIMER0
+	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
+	default 8
+config IRQ_TIMER1
+	int "IRQ_TIMER1"
+	default 12
+config IRQ_TIMER2
+	int "IRQ_TIMER2"
+	default 12
+config IRQ_TIMER3
+	int "IRQ_TIMER3"
+	default 12
+config IRQ_TIMER4
+	int "IRQ_TIMER4"
+	default 12
+config IRQ_TIMER5
+	int "IRQ_TIMER5"
+	default 12
+config IRQ_TIMER6
+	int "IRQ_TIMER6"
+	default 12
+config IRQ_TIMER7
+	int "IRQ_TIMER7"
+	default 12
+config IRQ_PORTG_INTA
+	int "IRQ_PORTG_INTA"
+	default 12
+config IRQ_PORTG_INTB
+	int "IRQ_PORTG_INTB"
+	default 12
+config IRQ_MEM_DMA0
+	int "IRQ_MEM_DMA0"
+	default 13
+config IRQ_MEM_DMA1
+	int "IRQ_MEM_DMA1"
+	default 13
+config IRQ_WATCH
+	int "IRQ_WATCH"
+	default 13
+config IRQ_PORTF_INTA
+	int "IRQ_PORTF_INTA"
+	default 13
+config IRQ_PORTF_INTB
+	int "IRQ_PORTF_INTB"
+	default 13
+config IRQ_SPI_ERROR
+	int "IRQ_SPI_ERROR"
+	default 7
+config IRQ_NFC_ERROR
+	int "IRQ_NFC_ERROR"
+	default 7
+config IRQ_HDMA_ERROR
+	int "IRQ_HDMA_ERROR"
+	default 7
+config IRQ_HDMA
+	int "IRQ_HDMA"
+	default 7
+config IRQ_USB_EINT
+	int "IRQ_USB_EINT"
+	default 10
+config IRQ_USB_INT0
+	int "IRQ_USB_INT0"
+	default 10
+config IRQ_USB_INT1
+	int "IRQ_USB_INT1"
+	default 10
+config IRQ_USB_INT2
+	int "IRQ_USB_INT2"
+	default 10
+config IRQ_USB_DMA
+	int "IRQ_USB_DMA"
+	default 10
+
+	help
+	  Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
+	  This applies to all the above.  It is not recommended to assign the
+	  highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/Makefile
new file mode 100644
index 0000000..4a6cdaf
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/Makefile
@@ -0,0 +1,5 @@
+#
+# arch/blackfin/mach-bf527/Makefile
+#
+
+obj-y := ints-priority.o dma.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/Kconfig
new file mode 100644
index 0000000..a76f02f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/Kconfig
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+choice
+	prompt "System type"
+	default BFIN527_EZKIT
+	help
+	  Select your board!
+
+config BFIN527_EZKIT
+	bool "BF527-EZKIT"
+	help
+	  BF527-EZKIT-LITE board support.
+
+config BFIN527_EZKIT_V2
+	bool "BF527-EZKIT-V2"
+	help
+	  BF527-EZKIT-LITE V2.1+ board support.
+
+config BFIN527_BLUETECHNIX_CM
+	bool "Bluetechnix CM-BF527"
+	help
+	  CM-BF527 support for EVAL- and DEV-Board.
+
+config BFIN526_EZBRD
+	bool "BF526-EZBRD"
+	help
+	  BF526-EZBRD/EZKIT Lite board support.
+
+config BFIN527_AD7160EVAL
+	bool "BF527-AD7160-EVAL"
+	help
+	  BF527-AD7160-EVAL board support.
+
+config BFIN527_TLL6527M
+	bool "The Learning Labs TLL6527M"
+	help
+	  TLL6527M V1.0 platform support
+
+endchoice
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/Makefile
new file mode 100644
index 0000000..6ada153
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# arch/blackfin/mach-bf527/boards/Makefile
+#
+
+obj-$(CONFIG_BFIN527_EZKIT)            += ezkit.o
+obj-$(CONFIG_BFIN527_EZKIT_V2)         += ezkit.o
+obj-$(CONFIG_BFIN527_BLUETECHNIX_CM)   += cm_bf527.o
+obj-$(CONFIG_BFIN526_EZBRD)            += ezbrd.o
+obj-$(CONFIG_BFIN527_AD7160EVAL)       += ad7160eval.o
+obj-$(CONFIG_BFIN527_TLL6527M)         += tll6527m.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/ad7160eval.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/ad7160eval.c
new file mode 100644
index 0000000..68f2a8a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/ad7160eval.c
@@ -0,0 +1,868 @@
+/*
+ * Copyright 2004-20010 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/musb.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "ADI BF527-AD7160EVAL";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+static struct resource musb_resources[] = {
+	[0] = {
+		.start	= 0xffc03800,
+		.end	= 0xffc03cff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= IRQ_USB_INT0,
+		.end	= IRQ_USB_INT0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= IRQ_USB_DMA,
+		.end	= IRQ_USB_DMA,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 8,
+	.dma_channels	= 8,
+	.gpio_vrsel	= GPIO_PG13,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
+	.clkin          = 24,           /* musb CLKIN in MHZ */
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.config		= &musb_config,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+	.name		= "musb-blackfin",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BFIN_RA158Z)
+static struct resource bf52x_ra158z_resources[] = {
+	{
+		.start = IRQ_PPI_ERROR,
+		.end = IRQ_PPI_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf52x_ra158z_device = {
+	.name		= "bfin-ra158z",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(bf52x_ra158z_resources),
+	.resource	= bf52x_ra158z_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+static struct mtd_partition ad7160eval_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x1C0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ad7160eval_flash_data = {
+	.width      = 2,
+	.parts      = ad7160eval_partitions,
+	.nr_parts   = ARRAY_SIZE(ad7160eval_partitions),
+};
+
+static struct resource ad7160eval_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x203fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ad7160eval_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ad7160eval_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ad7160eval_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
+static struct mtd_partition partition_info[] = {
+	{
+		.name = "linux kernel(nand)",
+		.offset = 0,
+		.size = 4 * 1024 * 1024,
+	},
+	{
+		.name = "file system(nand)",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+	.data_width = NFC_NWIDTH_8,
+	.partitions = partition_info,
+	.nr_partitions = ARRAY_SIZE(partition_info),
+	.rd_dly = 3,
+	.wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+	{
+		.start = NFC_CTL,
+		.end = NFC_DATA_RD + 2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_NFC,
+		.end = CH_NFC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf5xx_nand_device = {
+	.name = "bf5xx-nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+	.resource = bf5xx_nand_resources,
+	.dev = {
+		.platform_data = &bf5xx_nand_platform,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_RMII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
+};
+#endif
+
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+	},
+#endif
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 30000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = GPIO_PH3 + MAX_CTRL_CS,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PF9,
+		.end = GPIO_PF9,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PF10,
+		.end = GPIO_PF10,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7160)
+#include <linux/input/ad7160.h>
+static const struct ad7160_platform_data bfin_ad7160_ts_info = {
+	.sensor_x_res = 854,
+	.sensor_y_res = 480,
+	.pressure = 100,
+	.filter_coef = 3,
+	.coord_pref = AD7160_ORIG_TOP_LEFT,
+	.first_touch_window = 5,
+	.move_window = 3,
+	.event_cabs = AD7160_EMIT_ABS_MT_TRACKING_ID |
+			AD7160_EMIT_ABS_MT_PRESSURE |
+			AD7160_TRACKING_ID_ASCENDING,
+	.finger_act_ctrl = 0x64,
+	.haptic_effect1_ctrl = AD7160_HAPTIC_SLOT_A(60) |
+				AD7160_HAPTIC_SLOT_A_LVL_HIGH |
+				AD7160_HAPTIC_SLOT_B(60) |
+				AD7160_HAPTIC_SLOT_B_LVL_LOW,
+
+	.haptic_effect2_ctrl = AD7160_HAPTIC_SLOT_A(20) |
+				AD7160_HAPTIC_SLOT_A_LVL_HIGH |
+				AD7160_HAPTIC_SLOT_B(80) |
+				AD7160_HAPTIC_SLOT_B_LVL_LOW |
+				AD7160_HAPTIC_SLOT_C(120) |
+				AD7160_HAPTIC_SLOT_C_LVL_HIGH |
+				AD7160_HAPTIC_SLOT_D(30) |
+				AD7160_HAPTIC_SLOT_D_LVL_LOW,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7160)
+	{
+		I2C_BOARD_INFO("ad7160", 0x33),
+		.irq = IRQ_PH1,
+		.platform_data = (void *)&bfin_ad7160_ts_info,
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
+#include <linux/platform_data/bfin_rotary.h>
+
+static const u16 per_cnt[] = {
+	P_CNT_CUD,
+	P_CNT_CDG,
+	P_CNT_CZM,
+	0
+};
+
+static struct bfin_rotary_platform_data bfin_rotary_data = {
+	/*.rotary_up_key     = KEY_UP,*/
+	/*.rotary_down_key   = KEY_DOWN,*/
+	.rotary_rel_code   = REL_WHEEL,
+	.rotary_button_key = KEY_ENTER,
+	.debounce	   = 10,	/* 0..17 */
+	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
+	.pm_wakeup	   = 1,
+	.pin_list	   = per_cnt,
+};
+
+static struct resource bfin_rotary_resources[] = {
+	{
+		.start = CNT_CONFIG,
+		.end   = CNT_CONFIG + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CNT,
+		.end = IRQ_CNT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_rotary_device = {
+	.name		= "bfin-rotary",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(bfin_rotary_resources),
+	.resource	= bfin_rotary_resources,
+	.dev		= {
+		.platform_data = &bfin_rotary_data,
+	},
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] = {
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
+	&bf5xx_nand_device,
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+	&musb_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BFIN_RA158Z)
+	&bf52x_ra158z_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
+	&bfin_rotary_device,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+	&ad7160eval_flash_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+	&bfin_i2s,
+#endif
+};
+
+static int __init ad7160eval_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(ad7160eval_init);
+
+static struct platform_device *ad7160eval_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ad7160eval_early_devices,
+		ARRAY_SIZE(ad7160eval_early_devices));
+}
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
+}
+
+int bfin_get_ether_addr(char *addr)
+{
+	/* the MAC is stored in OTP memory page 0xDF */
+	u32 ret;
+	u64 otp_mac;
+	u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
+
+	ret = otp_read(0xDF, 0x00, &otp_mac);
+	if (!(ret & 0x1)) {
+		char *otp_mac_p = (char *)&otp_mac;
+		for (ret = 0; ret < 6; ++ret)
+			addr[ret] = otp_mac_p[5 - ret];
+	}
+	return 0;
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/cm_bf527.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/cm_bf527.c
new file mode 100644
index 0000000..b1004b3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -0,0 +1,992 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/etherdevice.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/musb.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM-BF527";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
+#include <linux/usb/isp1760.h>
+static struct resource bfin_isp1760_resources[] = {
+	[0] = {
+		.start  = 0x203C0000,
+		.end    = 0x203C0000 + 0x000fffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_PF7,
+		.end    = IRQ_PF7,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct isp1760_platform_data isp1760_priv = {
+	.is_isp1761 = 0,
+	.bus_width_16 = 1,
+	.port1_otg = 0,
+	.analog_oc = 0,
+	.dack_polarity_high = 0,
+	.dreq_polarity_high = 0,
+};
+
+static struct platform_device bfin_isp1760_device = {
+	.name           = "isp1760",
+	.id             = 0,
+	.dev = {
+		.platform_data = &isp1760_priv,
+	},
+	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
+	.resource       = bfin_isp1760_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+static struct resource musb_resources[] = {
+	[0] = {
+		.start	= 0xffc03800,
+		.end	= 0xffc03cff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= IRQ_USB_INT0,
+		.end	= IRQ_USB_INT0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "mc"
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= IRQ_USB_DMA,
+		.end	= IRQ_USB_DMA,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "dma"
+	},
+};
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 8,
+	.dma_channels	= 8,
+	.gpio_vrsel	= GPIO_PF11,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
+	.clkin          = 24,           /* musb CLKIN in MHZ */
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.config		= &musb_config,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+	.name		= "musb-blackfin",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
+static struct mtd_partition partition_info[] = {
+	{
+		.name = "linux kernel(nand)",
+		.offset = 0,
+		.size = 4 * 1024 * 1024,
+	},
+	{
+		.name = "file system(nand)",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+	.data_width = NFC_NWIDTH_8,
+	.partitions = partition_info,
+	.nr_partitions = ARRAY_SIZE(partition_info),
+	.rd_dly = 3,
+	.wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+	{
+		.start = NFC_CTL,
+		.end = NFC_DATA_RD + 2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_NFC,
+		.end = CH_NFC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf5xx_nand_device = {
+	.name = "bf5xx-nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+	.resource = bf5xx_nand_resources,
+	.dev = {
+		.platform_data = &bf5xx_nand_platform,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
+static struct resource bfin_pcmcia_cf_resources[] = {
+	{
+		.start = 0x20310000, /* IO PORT */
+		.end = 0x20312000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20311000, /* Attribute Memory */
+		.end = 0x20311FFF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF4,
+		.end = IRQ_PF4,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	}, {
+		.start = 6, /* Card Detect PF6 */
+		.end = 6,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+	.name = "bfin_cf_pcmcia",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+	.resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_DM9000)
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= 0x203FB800,
+		.end	= 0x203FB800 + 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0x203FB804,
+		.end	= 0x203FB804 + 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_PF9,
+		.end	= IRQ_PF9,
+		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+	},
+};
+
+static struct platform_device dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_RMII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity 	= 1,
+	.first_conversion_delay = 3,
+	.acquisition_time 	= 1,
+	.averaging 		= 1,
+	.pen_down_acc_interval 	= 1,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+	},
+#endif
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PF8,
+		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select  = 2,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+	{
+		.modalias	= "wm8731",
+		.max_speed_hz	= 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select    = 5,
+		.mode = SPI_MODE_0,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
+static struct mtd_partition cm_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0x100000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data cm_flash_data = {
+	.width    = 2,
+	.parts    = cm_partitions,
+	.nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PH9, GPIO_PG11 };
+
+static struct resource cm_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)cm_flash_gpios,
+		.end   = ARRAY_SIZE(cm_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device cm_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &cm_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(cm_flash_resource),
+	.resource      = cm_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PF9,
+		.end = GPIO_PF9,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PF10,
+		.end = GPIO_PF10,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+	},
+#endif
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.irq = IRQ_PF8,
+	},
+#endif
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
+	{
+		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *cmbf527_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
+	&bf5xx_nand_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
+	&bfin_pcmcia_cf_device,
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
+	&bfin_isp1760_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+	&musb_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	&smc91x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_DM9000)
+	&dm9000_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	&net2272_bfin_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+	&bfin_device_gpiokeys,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
+	&cm_flash_device,
+#endif
+};
+
+static int __init cm_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+	platform_add_devices(cmbf527_devices, ARRAY_SIZE(cmbf527_devices));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(cm_init);
+
+static struct platform_device *cmbf527_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cmbf527_early_devices,
+		ARRAY_SIZE(cmbf527_early_devices));
+}
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
+}
+
+int bfin_get_ether_addr(char *addr)
+{
+	return 1;
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/ezbrd.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/ezbrd.c
new file mode 100644
index 0000000..80bcfd1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -0,0 +1,891 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/musb.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "ADI BF526-EZBRD";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+static struct resource musb_resources[] = {
+	[0] = {
+		.start	= 0xffc03800,
+		.end	= 0xffc03cff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= IRQ_USB_INT0,
+		.end	= IRQ_USB_INT0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "mc"
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= IRQ_USB_DMA,
+		.end	= IRQ_USB_DMA,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "dma"
+	},
+};
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 8,
+	.dma_channels	= 8,
+	.gpio_vrsel	= GPIO_PG13,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
+	.clkin          = 24,           /* musb CLKIN in MHZ */
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.config		= &musb_config,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+	.name		= "musb-blackfin",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+static struct mtd_partition ezbrd_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x1C0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ezbrd_flash_data = {
+	.width      = 2,
+	.parts      = ezbrd_partitions,
+	.nr_parts   = ARRAY_SIZE(ezbrd_partitions),
+};
+
+static struct resource ezbrd_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x203fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezbrd_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezbrd_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezbrd_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
+static struct mtd_partition partition_info[] = {
+	{
+		.name = "bootloader(nand)",
+		.offset = 0,
+		.size = 0x40000,
+	}, {
+		.name = "linux kernel(nand)",
+		.offset = MTDPART_OFS_APPEND,
+		.size = 4 * 1024 * 1024,
+	},
+	{
+		.name = "file system(nand)",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+	.data_width = NFC_NWIDTH_8,
+	.partitions = partition_info,
+	.nr_partitions = ARRAY_SIZE(partition_info),
+	.rd_dly = 3,
+	.wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+	{
+		.start = NFC_CTL,
+		.end = NFC_DATA_RD + 2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_NFC,
+		.end = CH_NFC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf5xx_nand_device = {
+	.name = "bf5xx-nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+	.resource = bf5xx_nand_resources,
+	.dev = {
+		.platform_data = &bf5xx_nand_platform,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_RMII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "sst25wf040",
+};
+
+/* SPI flash chip (sst25wf040) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity 	= 1,
+	.first_conversion_delay = 3,
+	.acquisition_time 	= 1,
+	.averaging 		= 1,
+	.pen_down_acc_interval 	= 1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
+#include <linux/platform_data/ad7879.h>
+static const struct ad7879_platform_data bfin_ad7879_ts_info = {
+	.model			= 7879,	/* Model = AD7879 */
+	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
+	.pressure_max		= 10000,
+	.pressure_min		= 0,
+	.first_conversion_delay = 3,	/* wait 512us before do a first conversion */
+	.acquisition_time 	= 1,	/* 4us acquisition time per sample */
+	.median			= 2,	/* do 8 measurements */
+	.averaging 		= 1,	/* take the average of 4 middle samples */
+	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
+	.gpio_export		= 1,	/* Export GPIO to gpiolib */
+	.gpio_base		= -1,	/* Dynamic allocation */
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PF8,
+		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select  = 2,
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
+	{
+		.modalias = "ad7879",
+		.platform_data = &bfin_ad7879_ts_info,
+		.irq = IRQ_PG0,
+		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+	{
+		.modalias	= "wm8731",
+		.max_speed_hz	= 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select    = 5,
+		.mode = SPI_MODE_0,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+	},
+#endif
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+	{
+		.modalias = "bfin-lq035q1-spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PG0,
+		.end = GPIO_PG0,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PF10,
+		.end = GPIO_PF10,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+	},
+#endif
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.irq = IRQ_PF8,
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+#include <asm/bfin-lq035q1.h>
+
+static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
+	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.ppi_mode = USE_RGB565_16_BIT_PPI,
+	.use_bl = 1,
+	.gpio_bl = GPIO_PG12,
+};
+
+static struct resource bfin_lq035q1_resources[] = {
+	{
+		.start = IRQ_PPI_ERROR,
+		.end = IRQ_PPI_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_lq035q1_device = {
+	.name		= "bfin-lq035q1",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bfin_lq035q1_resources),
+	.resource 	= bfin_lq035q1_resources,
+	.dev		= {
+		.platform_data = &bfin_lq035q1_data,
+	},
+};
+#endif
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
+	&bf5xx_nand_device,
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+	&musb_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+	&bfin_lq035q1_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+	&bfin_device_gpiokeys,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+	&ezbrd_flash_device,
+#endif
+};
+
+static int __init ezbrd_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(ezbrd_init);
+
+static struct platform_device *ezbrd_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezbrd_early_devices,
+		ARRAY_SIZE(ezbrd_early_devices));
+}
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
+}
+
+int bfin_get_ether_addr(char *addr)
+{
+	/* the MAC is stored in OTP memory page 0xDF */
+	u32 ret;
+	u64 otp_mac;
+	u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
+
+	ret = otp_read(0xDF, 0x00, &otp_mac);
+	if (!(ret & 0x1)) {
+		char *otp_mac_p = (char *)&otp_mac;
+		for (ret = 0; ret < 6; ++ret)
+			addr[ret] = otp_mac_p[5 - ret];
+	}
+	return 0;
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/ezkit.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/ezkit.c
new file mode 100644
index 0000000..571edfd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -0,0 +1,1335 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/musb.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/spi/ad7877.h>
+#include <asm/bfin_sport.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+#ifdef CONFIG_BFIN527_EZKIT_V2
+const char bfin_board_name[] = "ADI BF527-EZKIT V2";
+#else
+const char bfin_board_name[] = "ADI BF527-EZKIT";
+#endif
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
+#include <linux/usb/isp1760.h>
+static struct resource bfin_isp1760_resources[] = {
+	[0] = {
+		.start  = 0x203C0000,
+		.end    = 0x203C0000 + 0x000fffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_PF7,
+		.end    = IRQ_PF7,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct isp1760_platform_data isp1760_priv = {
+	.is_isp1761 = 0,
+	.bus_width_16 = 1,
+	.port1_otg = 0,
+	.analog_oc = 0,
+	.dack_polarity_high = 0,
+	.dreq_polarity_high = 0,
+};
+
+static struct platform_device bfin_isp1760_device = {
+	.name           = "isp1760",
+	.id             = 0,
+	.dev = {
+		.platform_data = &isp1760_priv,
+	},
+	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
+	.resource       = bfin_isp1760_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+static struct resource musb_resources[] = {
+	[0] = {
+		.start	= 0xffc03800,
+		.end	= 0xffc03cff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= IRQ_USB_INT0,
+		.end	= IRQ_USB_INT0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "mc"
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= IRQ_USB_DMA,
+		.end	= IRQ_USB_DMA,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "dma"
+	},
+};
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 8,
+	.dma_channels	= 8,
+	.gpio_vrsel	= GPIO_PG13,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
+	.clkin          = 24,           /* musb CLKIN in MHZ */
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_HDRC) && defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.config		= &musb_config,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+	.name		= "musb-blackfin",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB)
+
+static struct resource bf52x_t350mcqb_resources[] = {
+	{
+		.start = IRQ_PPI_ERROR,
+		.end = IRQ_PPI_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf52x_t350mcqb_device = {
+	.name		= "bfin-t350mcqb",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bf52x_t350mcqb_resources),
+	.resource 	= bf52x_t350mcqb_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+#include <asm/bfin-lq035q1.h>
+
+static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
+	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.ppi_mode = USE_RGB565_8_BIT_PPI,
+};
+
+static struct resource bfin_lq035q1_resources[] = {
+	{
+		.start = IRQ_PPI_ERROR,
+		.end = IRQ_PPI_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_lq035q1_device = {
+	.name		= "bfin-lq035q1",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(bfin_lq035q1_resources),
+	.resource	= bfin_lq035q1_resources,
+	.dev		= {
+		.platform_data = &bfin_lq035q1_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+static struct mtd_partition ezkit_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x1C0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+	.width      = 2,
+	.parts      = ezkit_partitions,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x203fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezkit_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
+static struct mtd_partition partition_info[] = {
+	{
+		.name = "bootloader(nand)",
+		.offset = 0,
+		.size = 0x40000,
+	}, {
+		.name = "linux kernel(nand)",
+		.offset = MTDPART_OFS_APPEND,
+		.size = 4 * 1024 * 1024,
+	},
+	{
+		.name = "file system(nand)",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+	.data_width = NFC_NWIDTH_8,
+	.partitions = partition_info,
+	.nr_partitions = ARRAY_SIZE(partition_info),
+	.rd_dly = 3,
+	.wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+	{
+		.start = NFC_CTL,
+		.end = NFC_DATA_RD + 2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_NFC,
+		.end = CH_NFC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf5xx_nand_device = {
+	.name = "bf5xx-nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+	.resource = bf5xx_nand_resources,
+	.dev = {
+		.platform_data = &bf5xx_nand_platform,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
+static struct resource bfin_pcmcia_cf_resources[] = {
+	{
+		.start = 0x20310000, /* IO PORT */
+		.end = 0x20312000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20311000, /* Attribute Memory */
+		.end = 0x20311FFF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF4,
+		.end = IRQ_PF4,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	}, {
+		.start = 6, /* Card Detect PF6 */
+		.end = 6,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+	.name = "bfin_cf_pcmcia",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+	.resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_DM9000)
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= 0x203FB800,
+		.end	= 0x203FB800 + 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0x203FB800 + 4,
+		.end	= 0x203FB800 + 5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_PF9,
+		.end	= IRQ_PF9,
+		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+	},
+};
+
+static struct platform_device dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_RMII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 1,
+		.flags = IORESOURCE_BUS,
+	}, {
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity 	= 1,
+	.first_conversion_delay = 3,
+	.acquisition_time 	= 1,
+	.averaging 		= 1,
+	.pen_down_acc_interval 	= 1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
+#include <linux/platform_data/ad7879.h>
+static const struct ad7879_platform_data bfin_ad7879_ts_info = {
+	.model			= 7879,	/* Model = AD7879 */
+	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
+	.pressure_max		= 10000,
+	.pressure_min		= 0,
+	.first_conversion_delay = 3,	/* wait 512us before do a first conversion */
+	.acquisition_time 	= 1,	/* 4us acquisition time per sample */
+	.median			= 2,	/* do 8 measurements */
+	.averaging 		= 1,	/* take the average of 4 middle samples */
+	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
+	.gpio_export		= 0,	/* Export GPIO to gpiolib */
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+
+static const u16 bfin_snd_pin[][7] = {
+	{P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+		P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0, 0},
+	{P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+		P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_TFS, 0},
+};
+
+static struct bfin_snd_platform_data bfin_snd_data[] = {
+	{
+		.pin_req = &bfin_snd_pin[0][0],
+	},
+	{
+		.pin_req = &bfin_snd_pin[1][0],
+	},
+};
+
+#define BFIN_SND_RES(x) \
+	[x] = { \
+		{ \
+			.start = SPORT##x##_TCR1, \
+			.end = SPORT##x##_TCR1, \
+			.flags = IORESOURCE_MEM \
+		}, \
+		{ \
+			.start = CH_SPORT##x##_RX, \
+			.end = CH_SPORT##x##_RX, \
+			.flags = IORESOURCE_DMA, \
+		}, \
+		{ \
+			.start = CH_SPORT##x##_TX, \
+			.end = CH_SPORT##x##_TX, \
+			.flags = IORESOURCE_DMA, \
+		}, \
+		{ \
+			.start = IRQ_SPORT##x##_ERROR, \
+			.end = IRQ_SPORT##x##_ERROR, \
+			.flags = IORESOURCE_IRQ, \
+		} \
+	}
+
+static struct resource bfin_snd_resources[][4] = {
+	BFIN_SND_RES(0),
+	BFIN_SND_RES(1),
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+static struct platform_device bfin_i2s_pcm = {
+	.name = "bfin-i2s-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+static struct platform_device bfin_ac97_pcm = {
+	.name = "bfin-ac97-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	.num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+	.dev = {
+		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+static const char * const ad1836_link[] = {
+	"bfin-i2s.0",
+	"spi0.4",
+};
+static struct platform_device bfin_ad1836_machine = {
+	.name = "bfin-snd-ad1836",
+	.id = -1,
+	.dev = {
+		.platform_data = (void *)ad1836_link,
+	},
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+		.platform_data = "ad1836",
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 3,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PF8,
+		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select  = 2,
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
+	{
+		.modalias = "ad7879",
+		.platform_data = &bfin_ad7879_ts_info,
+		.irq = IRQ_PF8,
+		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 3,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+	},
+#endif
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+	{
+		.modalias = "bfin-lq035q1-spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 7,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PF9,
+		.end = GPIO_PF9,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PF10,
+		.end = GPIO_PF10,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_PMIC_ADP5520)
+#include <linux/mfd/adp5520.h>
+
+	/*
+	 *  ADP5520/5501 LEDs Data
+	 */
+
+static struct led_info adp5520_leds[] = {
+	{
+		.name = "adp5520-led1",
+		.default_trigger = "none",
+		.flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
+	},
+};
+
+static struct adp5520_leds_platform_data adp5520_leds_data = {
+	.num_leds = ARRAY_SIZE(adp5520_leds),
+	.leds = adp5520_leds,
+	.fade_in = ADP5520_FADE_T_600ms,
+	.fade_out = ADP5520_FADE_T_600ms,
+	.led_on_time = ADP5520_LED_ONT_600ms,
+};
+
+	/*
+	 *  ADP5520 Keypad Data
+	 */
+
+static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
+	[ADP5520_KEY(3, 3)]	= KEY_1,
+	[ADP5520_KEY(2, 3)]	= KEY_2,
+	[ADP5520_KEY(1, 3)]	= KEY_3,
+	[ADP5520_KEY(0, 3)]	= KEY_UP,
+	[ADP5520_KEY(3, 2)]	= KEY_4,
+	[ADP5520_KEY(2, 2)]	= KEY_5,
+	[ADP5520_KEY(1, 2)]	= KEY_6,
+	[ADP5520_KEY(0, 2)]	= KEY_DOWN,
+	[ADP5520_KEY(3, 1)]	= KEY_7,
+	[ADP5520_KEY(2, 1)]	= KEY_8,
+	[ADP5520_KEY(1, 1)]	= KEY_9,
+	[ADP5520_KEY(0, 1)]	= KEY_DOT,
+	[ADP5520_KEY(3, 0)]	= KEY_BACKSPACE,
+	[ADP5520_KEY(2, 0)]	= KEY_0,
+	[ADP5520_KEY(1, 0)]	= KEY_HELP,
+	[ADP5520_KEY(0, 0)]	= KEY_ENTER,
+};
+
+static struct adp5520_keys_platform_data adp5520_keys_data = {
+	.rows_en_mask	= ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
+	.cols_en_mask	= ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
+	.keymap		= adp5520_keymap,
+	.keymapsize	= ARRAY_SIZE(adp5520_keymap),
+	.repeat		= 0,
+};
+
+	/*
+	 *  ADP5520/5501 Multifunction Device Init Data
+	 */
+
+static struct adp5520_platform_data adp5520_pdev_data = {
+	.leds = &adp5520_leds_data,
+	.keys = &adp5520_keys_data,
+};
+
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+	},
+#endif
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.irq = IRQ_PF8,
+	},
+#endif
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
+	{
+		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
+	{
+		I2C_BOARD_INFO("ad7879", 0x2C),
+		.irq = IRQ_PF8,
+		.platform_data = (void *)&bfin_ad7879_ts_info,
+	},
+#endif
+#if IS_ENABLED(CONFIG_PMIC_ADP5520)
+	{
+		I2C_BOARD_INFO("pmic-adp5520", 0x32),
+		.irq = IRQ_PF9,
+		.platform_data = (void *)&adp5520_pdev_data,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
+	{
+		I2C_BOARD_INFO("ssm2602", 0x1b),
+	},
+#endif
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
+	{
+		I2C_BOARD_INFO("ad5252", 0x2f),
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373)
+	{
+		I2C_BOARD_INFO("adau1373", 0x1A),
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
+#include <linux/platform_data/bfin_rotary.h>
+
+static const u16 per_cnt[] = {
+	P_CNT_CUD,
+	P_CNT_CDG,
+	P_CNT_CZM,
+	0
+};
+
+static struct bfin_rotary_platform_data bfin_rotary_data = {
+	/*.rotary_up_key     = KEY_UP,*/
+	/*.rotary_down_key   = KEY_DOWN,*/
+	.rotary_rel_code   = REL_WHEEL,
+	.rotary_button_key = KEY_ENTER,
+	.debounce	   = 10,	/* 0..17 */
+	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
+	.pm_wakeup	   = 1,
+	.pin_list	   = per_cnt,
+};
+
+static struct resource bfin_rotary_resources[] = {
+	{
+		.start = CNT_CONFIG,
+		.end   = CNT_CONFIG + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CNT,
+		.end = IRQ_CNT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_rotary_device = {
+	.name		= "bfin-rotary",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bfin_rotary_resources),
+	.resource 	= bfin_rotary_resources,
+	.dev		= {
+		.platform_data = &bfin_rotary_data,
+	},
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
+	&bf5xx_nand_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
+	&bfin_pcmcia_cf_device,
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
+	&bfin_isp1760_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+	&musb_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	&smc91x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_DM9000)
+	&dm9000_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	&net2272_bfin_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB)
+	&bf52x_t350mcqb_device,
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+	&bfin_lq035q1_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+	&bfin_device_gpiokeys,
+#endif
+
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
+	&bfin_rotary_device,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+	&ezkit_flash_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+	&bfin_i2s_pcm,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+	&bfin_ac97_pcm,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+	&bfin_i2s,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+	&bfin_ad1836_machine,
+#endif
+};
+
+static int __init ezkit_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(ezkit_init);
+
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
+}
+
+int bfin_get_ether_addr(char *addr)
+{
+	/* the MAC is stored in OTP memory page 0xDF */
+	u32 ret;
+	u64 otp_mac;
+	u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
+
+	ret = otp_read(0xDF, 0x00, &otp_mac);
+	if (!(ret & 0x1)) {
+		char *otp_mac_p = (char *)&otp_mac;
+		for (ret = 0; ret < 6; ++ret)
+			addr[ret] = otp_mac_p[5 - ret];
+	}
+	return 0;
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/tll6527m.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/tll6527m.c
new file mode 100644
index 0000000..ce5488e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/boards/tll6527m.c
@@ -0,0 +1,946 @@
+/* File:	arch/blackfin/mach-bf527/boards/tll6527m.c
+ * Based on:	arch/blackfin/mach-bf527/boards/ezkit.c
+ * Author:	Ashish Gupta
+ *
+ * Copyright: 2010 - The Learning Labs Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/musb.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
+#include <linux/platform_data/ad7879.h>
+#define LCD_BACKLIGHT_GPIO 0x40
+/* TLL6527M uses TLL7UIQ35 / ADI LCD EZ Extender. AD7879 AUX GPIO is used for
+ * LCD Backlight Enable
+ */
+#endif
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "TLL6527M";
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+static struct resource musb_resources[] = {
+	[0] = {
+		.start	= 0xffc03800,
+		.end	= 0xffc03cff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= IRQ_USB_INT0,
+		.end	= IRQ_USB_INT0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= IRQ_USB_DMA,
+		.end	= IRQ_USB_DMA,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 8,
+	.dma_channels	= 8,
+	/*.gpio_vrsel	= GPIO_PG13,*/
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.config		= &musb_config,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+	.name		= "musb-blackfin",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+#include <asm/bfin-lq035q1.h>
+
+static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
+	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.ppi_mode = USE_RGB565_16_BIT_PPI,
+	.use_bl = 1,
+	.gpio_bl = LCD_BACKLIGHT_GPIO,
+};
+
+static struct resource bfin_lq035q1_resources[] = {
+	{
+		.start = IRQ_PPI_ERROR,
+		.end = IRQ_PPI_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_lq035q1_device = {
+	.name		= "bfin-lq035q1",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(bfin_lq035q1_resources),
+	.resource	= bfin_lq035q1_resources,
+	.dev		= {
+		.platform_data = &bfin_lq035q1_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
+static struct mtd_partition tll6527m_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0xA0000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0xD00000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data tll6527m_flash_data = {
+	.width      = 2,
+	.parts      = tll6527m_partitions,
+	.nr_parts   = ARRAY_SIZE(tll6527m_partitions),
+};
+
+static unsigned tll6527m_flash_gpios[] = { GPIO_PG11, GPIO_PH11, GPIO_PH12 };
+
+static struct resource tll6527m_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)tll6527m_flash_gpios,
+		.end   = ARRAY_SIZE(tll6527m_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device tll6527m_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &tll6527m_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(tll6527m_flash_resource),
+	.resource      = tll6527m_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_GPIO_DECODER)
+/* An SN74LVC138A 3:8 decoder chip has been used to generate 7 augmented
+ * outputs used as SPI CS lines for all SPI SLAVE devices on TLL6527v1-0.
+ * EXP_GPIO_SPISEL_BASE is the base number for the expanded outputs being
+ * used as SPI CS lines, this should be > MAX_BLACKFIN_GPIOS
+ */
+#include <linux/gpio-decoder.h>
+#define EXP_GPIO_SPISEL_BASE 0x64
+static unsigned gpio_addr_inputs[] = {
+	GPIO_PG1, GPIO_PH9, GPIO_PH10
+};
+
+static struct gpio_decoder_platform_data spi_decoded_cs = {
+	.base		= EXP_GPIO_SPISEL_BASE,
+	.input_addrs	= gpio_addr_inputs,
+	.nr_input_addrs = ARRAY_SIZE(gpio_addr_inputs),
+	.default_output	= 0,
+/*	.default_output = (1 << ARRAY_SIZE(gpio_addr_inputs)) - 1 */
+};
+
+static struct platform_device spi_decoded_gpio = {
+	.name	= "gpio-decoder",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &spi_decoded_cs,
+	},
+};
+
+#else
+#define EXP_GPIO_SPISEL_BASE 0x0
+
+#endif
+
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
+#include <linux/input/adxl34x.h>
+static const struct adxl34x_platform_data adxl345_info = {
+	.x_axis_offset = 0,
+	.y_axis_offset = 0,
+	.z_axis_offset = 0,
+	.tap_threshold = 0x31,
+	.tap_duration = 0x10,
+	.tap_latency = 0x60,
+	.tap_window = 0xF0,
+	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+	.act_axis_control = 0xFF,
+	.activity_threshold = 5,
+	.inactivity_threshold = 2,
+	.inactivity_time = 2,
+	.free_fall_threshold = 0x7,
+	.free_fall_time = 0x20,
+	.data_rate = 0x8,
+	.data_range = ADXL_FULL_RES,
+
+	.ev_type = EV_ABS,
+	.ev_code_x = ABS_X,		/* EV_REL */
+	.ev_code_y = ABS_Y,		/* EV_REL */
+	.ev_code_z = ABS_Z,		/* EV_REL */
+
+	.ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
+
+/*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
+	.ev_code_act_inactivity = KEY_A,	/* EV_KEY */
+	.use_int2 = 1,
+	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+	.fifo_mode = ADXL_FIFO_STREAM,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_RMII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
+static const struct ad7879_platform_data bfin_ad7879_ts_info = {
+	.model			= 7879,	/* Model = AD7879 */
+	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
+	.pressure_max		= 10000,
+	.pressure_min		= 0,
+	.first_conversion_delay = 3,
+				/* wait 512us before do a first conversion */
+	.acquisition_time	= 1,	/* 4us acquisition time per sample */
+	.median			= 2,	/* do 8 measurements */
+	.averaging		= 1,
+				/* take the average of 4 middle samples */
+	.pen_down_acc_interval	= 255,	/* 9.4 ms */
+	.gpio_export		= 1,	/* configure AUX as GPIO output*/
+	.gpio_base		= LCD_BACKLIGHT_GPIO,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
+#include <linux/spi/mcp23s08.h>
+static const struct mcp23s08_platform_data bfin_mcp23s08_sys_gpio_info = {
+	.spi_present_mask = BIT(0),
+	.base = 0x30,
+};
+static const struct mcp23s08_platform_data bfin_mcp23s08_usr_gpio_info = {
+	.spi_present_mask = BIT(2),
+	.base = 0x38,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,
+				/* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = EXP_GPIO_SPISEL_BASE + 0x04 + MAX_CTRL_CS,
+		/* Can be connected to TLL6527M GPIO connector */
+		/* Either SPI_ADC or M25P80 FLASH can be installed at a time */
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+/*
+ * TLL6527M V1.0 does not support SD Card at SPI Clock > 10 MHz due to
+ * SPI buffer limitations
+ */
+		.max_speed_hz = 10000000,
+					/* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = EXP_GPIO_SPISEL_BASE + 0x05 + MAX_CTRL_CS,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
+	{
+		.modalias = "ad7879",
+		.platform_data = &bfin_ad7879_ts_info,
+		.irq = IRQ_PH14,
+		.max_speed_hz = 5000000,
+					/* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = EXP_GPIO_SPISEL_BASE + 0x07 + MAX_CTRL_CS,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 10000000,
+		/* TLL6527Mv1-0 supports max spi clock (SCK) speed = 10 MHz */
+		.bus_num = 0,
+		.chip_select = EXP_GPIO_SPISEL_BASE + 0x03 + MAX_CTRL_CS,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+	{
+		.modalias = "bfin-lq035q1-spi",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = EXP_GPIO_SPISEL_BASE + 0x06 + MAX_CTRL_CS,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
+	{
+		.modalias = "mcp23s08",
+		.platform_data = &bfin_mcp23s08_sys_gpio_info,
+		.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = EXP_GPIO_SPISEL_BASE + 0x01 + MAX_CTRL_CS,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+	{
+		.modalias = "mcp23s08",
+		.platform_data = &bfin_mcp23s08_usr_gpio_info,
+		.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = EXP_GPIO_SPISEL_BASE + 0x02 + MAX_CTRL_CS,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = EXP_GPIO_SPISEL_BASE + 8 + MAX_CTRL_CS,
+	/* EXP_GPIO_SPISEL_BASE will be > MAX_BLACKFIN_GPIOS */
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals,
+					/* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PF9,
+		.end = GPIO_PF9,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PF10,
+		.end = GPIO_PF10,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals,
+						/* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
+	{
+		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
+	{
+		I2C_BOARD_INFO("ad7879", 0x2C),
+		.irq = IRQ_PH14,
+		.platform_data = (void *)&bfin_ad7879_ts_info,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
+	{
+		I2C_BOARD_INFO("ssm2602", 0x1b),
+	},
+#endif
+	{
+		I2C_BOARD_INFO("adm1192", 0x2e),
+	},
+
+	{
+		I2C_BOARD_INFO("ltc3576", 0x09),
+	},
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
+	{
+		I2C_BOARD_INFO("adxl34x", 0x53),
+		.irq = IRQ_PH13,
+		.platform_data = (void *)&adxl345_info,
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals,
+		/* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals,
+		/* Passed to driver */
+	},
+};
+#endif
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] = {
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *tll6527m_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+	&musb_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+	&bfin_lq035q1_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
+	&tll6527m_flash_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+	&bfin_i2s,
+#endif
+
+#if IS_ENABLED(CONFIG_GPIO_DECODER)
+	&spi_decoded_gpio,
+#endif
+};
+
+static int __init tll6527m_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+	platform_add_devices(tll6527m_devices, ARRAY_SIZE(tll6527m_devices));
+	spi_register_board_info(bfin_spi_board_info,
+				ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(tll6527m_init);
+
+static struct platform_device *tll6527m_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(tll6527m_early_devices,
+		ARRAY_SIZE(tll6527m_early_devices));
+}
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
+}
+
+int bfin_get_ether_addr(char *addr)
+{
+	/* the MAC is stored in OTP memory page 0xDF */
+	u32 ret;
+	u64 otp_mac;
+	u32 (*otp_read)(u32 page, u32 flags,
+			u64 *page_content) = (void *)0xEF00001A;
+
+	ret = otp_read(0xDF, 0x00, &otp_mac);
+	if (!(ret & 0x1)) {
+		char *otp_mac_p = (char *)&otp_mac;
+		for (ret = 0; ret < 6; ++ret)
+			addr[ret] = otp_mac_p[5 - ret];
+	}
+	return 0;
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/dma.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/dma.c
new file mode 100644
index 0000000..1fabdef
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/dma.c
@@ -0,0 +1,98 @@
+/*
+ * This file contains the simple DMA Implementation for Blackfin
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS] = {
+	(struct dma_register *) DMA0_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_NEXT_DESC_PTR,
+	(struct dma_register *) DMA3_NEXT_DESC_PTR,
+	(struct dma_register *) DMA4_NEXT_DESC_PTR,
+	(struct dma_register *) DMA5_NEXT_DESC_PTR,
+	(struct dma_register *) DMA6_NEXT_DESC_PTR,
+	(struct dma_register *) DMA7_NEXT_DESC_PTR,
+	(struct dma_register *) DMA8_NEXT_DESC_PTR,
+	(struct dma_register *) DMA9_NEXT_DESC_PTR,
+	(struct dma_register *) DMA10_NEXT_DESC_PTR,
+	(struct dma_register *) DMA11_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+};
+EXPORT_SYMBOL(dma_io_base_addr);
+
+int channel2irq(unsigned int channel)
+{
+	int ret_irq = -1;
+
+	switch (channel) {
+	case CH_PPI:
+		ret_irq = IRQ_PPI;
+		break;
+
+	case CH_EMAC_RX:
+		ret_irq = IRQ_MAC_RX;
+		break;
+
+	case CH_EMAC_TX:
+		ret_irq = IRQ_MAC_TX;
+		break;
+
+	case CH_UART1_RX:
+		ret_irq = IRQ_UART1_RX;
+		break;
+
+	case CH_UART1_TX:
+		ret_irq = IRQ_UART1_TX;
+		break;
+
+	case CH_SPORT0_RX:
+		ret_irq = IRQ_SPORT0_RX;
+		break;
+
+	case CH_SPORT0_TX:
+		ret_irq = IRQ_SPORT0_TX;
+		break;
+
+	case CH_SPORT1_RX:
+		ret_irq = IRQ_SPORT1_RX;
+		break;
+
+	case CH_SPORT1_TX:
+		ret_irq = IRQ_SPORT1_TX;
+		break;
+
+	case CH_SPI:
+		ret_irq = IRQ_SPI;
+		break;
+
+	case CH_UART0_RX:
+		ret_irq = IRQ_UART0_RX;
+		break;
+
+	case CH_UART0_TX:
+		ret_irq = IRQ_UART0_TX;
+		break;
+
+	case CH_MEM_STREAM0_SRC:
+	case CH_MEM_STREAM0_DEST:
+		ret_irq = IRQ_MEM_DMA0;
+		break;
+
+	case CH_MEM_STREAM1_SRC:
+	case CH_MEM_STREAM1_DEST:
+		ret_irq = IRQ_MEM_DMA1;
+		break;
+	}
+	return ret_irq;
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/anomaly.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/anomaly.h
new file mode 100644
index 0000000..2f9cc33
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -0,0 +1,290 @@
+/*
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
+ *
+ * Copyright 2004-2011 Analog Devices Inc.
+ * Licensed under the Clear BSD license.
+ */
+
+/* This file should be up to date with:
+ *  - Revision F, 05/23/2011; ADSP-BF526 Blackfin Processor Anomaly List
+ *  - Revision I, 05/23/2011; ADSP-BF527 Blackfin Processor Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* We do not support old silicon - sorry */
+#if __SILICON_REVISION__ < 0
+# error will not work on BF526/BF527 silicon version
+#endif
+
+#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
+# define ANOMALY_BF526 1
+#else
+# define ANOMALY_BF526 0
+#endif
+#if defined(__ADSPBF523__) || defined(__ADSPBF525__) || defined(__ADSPBF527__)
+# define ANOMALY_BF527 1
+#else
+# define ANOMALY_BF527 0
+#endif
+
+#define _ANOMALY_BF526(rev526) (ANOMALY_BF526 && __SILICON_REVISION__ rev526)
+#define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527)
+#define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527))
+
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (1)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (1)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
+#define ANOMALY_05000313 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* Incorrect Access of OTP_STATUS During otp_write() Function */
+#define ANOMALY_05000328 (_ANOMALY_BF527(< 2))
+/* Host DMA Boot Modes Are Not Functional */
+#define ANOMALY_05000330 (_ANOMALY_BF527(< 2))
+/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
+#define ANOMALY_05000337 (_ANOMALY_BF527(< 2))
+/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
+#define ANOMALY_05000341 (_ANOMALY_BF527(< 2))
+/* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
+#define ANOMALY_05000342 (_ANOMALY_BF527(< 2))
+/* USB Calibration Value Is Not Initialized */
+#define ANOMALY_05000346 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* USB Calibration Value to use */
+#define ANOMALY_05000346_value 0xE510
+/* Preboot Routine Incorrectly Alters Reset Value of USB Register */
+#define ANOMALY_05000347 (_ANOMALY_BF527(< 2))
+/* Security Features Are Not Functional */
+#define ANOMALY_05000348 (_ANOMALY_BF527(< 1))
+/* bfrom_SysControl() Firmware Function Performs Improper System Reset */
+#define ANOMALY_05000353 (_ANOMALY_BF526(< 1))
+/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
+#define ANOMALY_05000355 (_ANOMALY_BF527(< 2))
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (_ANOMALY_BF527(< 2))
+/* Incorrect Revision Number in DSPID Register */
+#define ANOMALY_05000364 (_ANOMALY_BF527(== 1))
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Incorrect Default CSEL Value in PLL_DIV */
+#define ANOMALY_05000368 (_ANOMALY_BF527(< 2))
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (_ANOMALY_BF527(< 2))
+/* Authentication Fails To Initiate */
+#define ANOMALY_05000376 (_ANOMALY_BF527(< 2))
+/* Data Read From L3 Memory by USB DMA May be Corrupted */
+#define ANOMALY_05000380 (_ANOMALY_BF527(< 2))
+/* 8-Bit NAND Flash Boot Mode Not Functional */
+#define ANOMALY_05000382 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* Boot from OTP Memory Not Functional */
+#define ANOMALY_05000385 (_ANOMALY_BF527(< 2))
+/* bfrom_SysControl() Firmware Routine Not Functional */
+#define ANOMALY_05000386 (_ANOMALY_BF527(< 2))
+/* Programmable Preboot Settings Not Functional */
+#define ANOMALY_05000387 (_ANOMALY_BF527(< 2))
+/* CRC32 Checksum Support Not Functional */
+#define ANOMALY_05000388 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* Reset Vector Must Not Be in SDRAM Memory Space */
+#define ANOMALY_05000389 (_ANOMALY_BF527(< 2))
+/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000392 (_ANOMALY_BF527(< 2))
+/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000393 (_ANOMALY_BF527(< 2))
+/* Log Buffer Not Functional */
+#define ANOMALY_05000394 (_ANOMALY_BF527(< 2))
+/* Hook Routine Not Functional */
+#define ANOMALY_05000395 (_ANOMALY_BF527(< 2))
+/* Header Indirect Bit Not Functional */
+#define ANOMALY_05000396 (_ANOMALY_BF527(< 2))
+/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
+#define ANOMALY_05000397 (_ANOMALY_BF527(< 2))
+/* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */
+#define ANOMALY_05000398 (_ANOMALY_BF527(< 2))
+/* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */
+#define ANOMALY_05000399 (_ANOMALY_BF527(< 2))
+/* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
+#define ANOMALY_05000401 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* Lockbox SESR Disallows Certain User Interrupts */
+#define ANOMALY_05000404 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
+#define ANOMALY_05000405 (1)
+/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
+#define ANOMALY_05000407 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
+#define ANOMALY_05000408 (1)
+/* Lockbox firmware leaves MDMA0 channel enabled */
+#define ANOMALY_05000409 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* Incorrect Default Internal Voltage Regulator Setting */
+#define ANOMALY_05000410 (_ANOMALY_BF527(< 2))
+/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
+#define ANOMALY_05000411 (_ANOMALY_BF526(< 1))
+/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
+#define ANOMALY_05000414 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* DEB2_URGENT Bit Not Functional */
+#define ANOMALY_05000415 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */
+#define ANOMALY_05000417 (_ANOMALY_BF527(< 2))
+/* PPI Timing Requirements tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */
+#define ANOMALY_05000418 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */
+#define ANOMALY_05000420 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */
+#define ANOMALY_05000421 (1)
+/* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */
+#define ANOMALY_05000422 (_ANOMALY_BF526_BF527(> 0, > 1))
+/* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */
+#define ANOMALY_05000423 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* Internal Voltage Regulator Not Trimmed */
+#define ANOMALY_05000424 (_ANOMALY_BF527(< 2))
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
+#define ANOMALY_05000429 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* Software System Reset Corrupts PLL_LOCKCNT Register */
+#define ANOMALY_05000430 (_ANOMALY_BF527(> 1))
+/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+#define ANOMALY_05000431 (1)
+/* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
+#define ANOMALY_05000432 (_ANOMALY_BF526(< 1))
+/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */
+#define ANOMALY_05000434 (1)
+/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
+#define ANOMALY_05000435 (_ANOMALY_BF526_BF527(< 1, >= 0))
+/* Preboot Cannot be Used to Alter the PLL_DIV Register */
+#define ANOMALY_05000439 (_ANOMALY_BF526_BF527(< 1, >= 0))
+/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
+#define ANOMALY_05000440 (_ANOMALY_BF526_BF527(< 1, >= 0))
+/* OTP Write Accesses Not Supported */
+#define ANOMALY_05000442 (_ANOMALY_BF527(< 1))
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
+/* The WURESET Bit in the SYSCR Register is not Functional */
+#define ANOMALY_05000445 (_ANOMALY_BF527(>= 0))
+/* USB DMA Short Packet Data Corruption */
+#define ANOMALY_05000450 (1)
+/* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
+#define ANOMALY_05000451 (_ANOMALY_BF527(>= 0))
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (_ANOMALY_BF526_BF527(< 1, >= 0))
+/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
+#define ANOMALY_05000456 (1)
+/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
+#define ANOMALY_05000457 (1)
+/* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */
+#define ANOMALY_05000460 (1)
+/* False Hardware Error when RETI Points to Invalid Memory */
+#define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
+/* USB Rx DMA Hang */
+#define ANOMALY_05000465 (1)
+/* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */
+#define ANOMALY_05000466 (1)
+/* Possible USB RX Data Corruption When Control & Data EP FIFOs are Accessed via the Core */
+#define ANOMALY_05000467 (1)
+/* PLL Latches Incorrect Settings During Reset */
+#define ANOMALY_05000469 (1)
+/* Incorrect Default MSEL Value in PLL_CTL */
+#define ANOMALY_05000472 (_ANOMALY_BF526(>= 0))
+/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */
+#define ANOMALY_05000473 (1)
+/* Possible Lockup Condition when Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */
+#define ANOMALY_05000483 (1)
+/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */
+#define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, >= 0))
+/* The CODEC Zero-Cross Detect Feature is not Functional */
+#define ANOMALY_05000487 (1)
+/* SPI Master Boot Can Fail Under Certain Conditions */
+#define ANOMALY_05000490 (1)
+/* Instruction Memory Stalls Can Cause IFLUSH to Fail */
+#define ANOMALY_05000491 (1)
+/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */
+#define ANOMALY_05000494 (1)
+/* CNT_COMMAND Functionality Depends on CNT_IMASK Configuration */
+#define ANOMALY_05000498 (1)
+/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */
+#define ANOMALY_05000501 (1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
+#define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
+#define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000219 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
+#define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
+#define ANOMALY_05000242 (0)
+#define ANOMALY_05000244 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
+#define ANOMALY_05000257 (0)
+#define ANOMALY_05000261 (0)
+#define ANOMALY_05000263 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000273 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000278 (0)
+#define ANOMALY_05000281 (0)
+#define ANOMALY_05000283 (0)
+#define ANOMALY_05000285 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000301 (0)
+#define ANOMALY_05000305 (0)
+#define ANOMALY_05000307 (0)
+#define ANOMALY_05000311 (0)
+#define ANOMALY_05000312 (0)
+#define ANOMALY_05000315 (0)
+#define ANOMALY_05000323 (0)
+#define ANOMALY_05000362 (1)
+#define ANOMALY_05000363 (0)
+#define ANOMALY_05000383 (0)
+#define ANOMALY_05000400 (0)
+#define ANOMALY_05000402 (0)
+#define ANOMALY_05000412 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000480 (0)
+#define ANOMALY_16000030 (0)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/bf527.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/bf527.h
new file mode 100644
index 0000000..8ff155b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/bf527.h
@@ -0,0 +1,237 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __MACH_BF527_H__
+#define __MACH_BF527_H__
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15		0x8000
+#define IMASK_IVG14		0x4000
+#define IMASK_IVG13		0x2000
+#define IMASK_IVG12		0x1000
+
+#define IMASK_IVG11		0x0800
+#define IMASK_IVG10		0x0400
+#define IMASK_IVG9		0x0200
+#define IMASK_IVG8		0x0100
+
+#define IMASK_IVG7		0x0080
+#define IMASK_IVGTMR	0x0040
+#define IMASK_IVGHW		0x0020
+
+/***************************/
+
+#define BFIN_DSUBBANKS	4
+#define BFIN_DWAYS		2
+#define BFIN_DLINES		64
+#define BFIN_ISUBBANKS	4
+#define BFIN_IWAYS		4
+#define BFIN_ILINES		32
+
+#define WAY0_L			0x1
+#define WAY1_L			0x2
+#define WAY01_L			0x3
+#define WAY2_L			0x4
+#define WAY02_L			0x5
+#define	WAY12_L			0x6
+#define	WAY012_L		0x7
+
+#define	WAY3_L			0x8
+#define	WAY03_L			0x9
+#define	WAY13_L			0xA
+#define	WAY013_L		0xB
+
+#define	WAY32_L			0xC
+#define	WAY320_L		0xD
+#define	WAY321_L		0xE
+#define	WAYALL_L		0xF
+
+#define DMC_ENABLE (2<<2)	/*yes, 2, not 1 */
+
+/********************************* EBIU Settings ************************************/
+#define AMBCTL0VAL	((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL	((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#ifdef CONFIG_C_AMBEN_ALL
+#define V_AMBEN AMBEN_ALL
+#endif
+#ifdef CONFIG_C_AMBEN
+#define V_AMBEN 0x0
+#endif
+#ifdef CONFIG_C_AMBEN_B0
+#define V_AMBEN AMBEN_B0
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1
+#define V_AMBEN AMBEN_B0_B1
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1_B2
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+#ifdef CONFIG_C_CDPRIO
+#define V_CDPRIO 0x100
+#else
+#define V_CDPRIO 0x0
+#endif
+
+#define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO)
+
+/**************************** Hysteresis Settings ****************************/
+
+#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL
+#ifdef CONFIG_GPIO_HYST_PORTF_0_7
+#define HYST_PORTF_0_7		(1 << 0)
+#else
+#define HYST_PORTF_0_7		(0 << 0)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_8_9
+#define HYST_PORTF_8_9		(1 << 2)
+#else
+#define HYST_PORTF_8_9		(0 << 2)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_10
+#define HYST_PORTF_10		(1 << 4)
+#else
+#define HYST_PORTF_10		(0 << 4)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_11
+#define HYST_PORTF_11		(1 << 6)
+#else
+#define HYST_PORTF_11		(0 << 6)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_12_13
+#define HYST_PORTF_12_13	(1 << 8)
+#else
+#define HYST_PORTF_12_13	(0 << 8)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_14_15
+#define HYST_PORTF_14_15	(1 << 10)
+#else
+#define HYST_PORTF_14_15	(0 << 10)
+#endif
+
+#define HYST_PORTF_0_15	(HYST_PORTF_0_7 | HYST_PORTF_8_9 | HYST_PORTF_10 | \
+		HYST_PORTF_11 | HYST_PORTF_12_13 | HYST_PORTF_14_15)
+
+#ifdef CONFIG_GPIO_HYST_PORTG_0
+#define HYST_PORTG_0		(1 << 0)
+#else
+#define HYST_PORTG_0		(0 << 0)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_1_4
+#define HYST_PORTG_1_4		(1 << 2)
+#else
+#define HYST_PORTG_1_4		(0 << 2)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_5_6
+#define HYST_PORTG_5_6		(1 << 4)
+#else
+#define HYST_PORTG_5_6		(0 << 4)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_7_8
+#define HYST_PORTG_7_8		(1 << 6)
+#else
+#define HYST_PORTG_7_8		(0 << 6)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_9
+#define HYST_PORTG_9		(1 << 8)
+#else
+#define HYST_PORTG_9		(0 << 8)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_10
+#define HYST_PORTG_10		(1 << 10)
+#else
+#define HYST_PORTG_10		(0 << 10)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_11_13
+#define HYST_PORTG_11_13	(1 << 12)
+#else
+#define HYST_PORTG_11_13	(0 << 12)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_14_15
+#define HYST_PORTG_14_15	(1 << 14)
+#else
+#define HYST_PORTG_14_15	(0 << 14)
+#endif
+
+#define HYST_PORTG_0_15	(HYST_PORTG_0 | HYST_PORTG_1_4 | HYST_PORTG_5_6 | \
+		HYST_PORTG_7_8 | HYST_PORTG_9 | HYST_PORTG_10 | \
+		HYST_PORTG_11_13 | HYST_PORTG_14_15)
+
+#ifdef CONFIG_GPIO_HYST_PORTH_0_7
+#define HYST_PORTH_0_7		(1 << 0)
+#else
+#define HYST_PORTH_0_7		(0 << 0)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTH_8
+#define HYST_PORTH_8		(1 << 2)
+#else
+#define HYST_PORTH_8		(0 << 2)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTH_9_15
+#define HYST_PORTH_9_15		(1 << 4)
+#else
+#define HYST_PORTH_9_15		(0 << 4)
+#endif
+
+#define HYST_PORTH_0_15	(HYST_PORTH_0_7 | HYST_PORTH_8 | HYST_PORTH_9_15)
+
+#ifdef CONFIG_NONEGPIO_HYST_TMR0_FS1_PPICLK
+#define HYST_TMR0_FS1_PPICLK		(1 << 0)
+#else
+#define HYST_TMR0_FS1_PPICLK		(0 << 0)
+#endif
+#ifdef CONFIG_NONEGPIO_HYST_NMI_RST_BMODE
+#define HYST_NMI_RST_BMODE		(1 << 2)
+#else
+#define HYST_NMI_RST_BMODE		(0 << 2)
+#endif
+#ifdef CONFIG_NONEGPIO_HYST_JTAG
+#define HYST_JTAG			(1 << 4)
+#else
+#define HYST_JTAG			(0 << 4)
+#endif
+
+#define HYST_NONEGPIO	(HYST_TMR0_FS1_PPICLK | HYST_NMI_RST_BMODE | HYST_JTAG)
+#define HYST_NONEGPIO_MASK		(0x3F)
+#endif /* CONFIG_BFIN_HYSTERESIS_CONTROL */
+
+#ifdef CONFIG_BF527
+#define CPU "BF527"
+#define CPUID 0x27e0
+#endif
+#ifdef CONFIG_BF526
+#define CPU "BF526"
+#define CPUID 0x27e4
+#endif
+#ifdef CONFIG_BF525
+#define CPU "BF525"
+#define CPUID 0x27e0
+#endif
+#ifdef CONFIG_BF524
+#define CPU "BF524"
+#define CPUID 0x27e4
+#endif
+#ifdef CONFIG_BF523
+#define CPU "BF523"
+#define CPUID 0x27e0
+#endif
+#ifdef CONFIG_BF522
+#define CPU "BF522"
+#define CPUID 0x27e4
+#endif
+
+#ifndef CPU
+#error "Unknown CPU type - This kernel doesn't seem to be configured properly"
+#endif
+
+#endif				/* __MACH_BF527_H__  */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/bfin_serial.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/bfin_serial.h
new file mode 100644
index 0000000..00c603f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/bfin_serial.h
@@ -0,0 +1,14 @@
+/*
+ * mach/bfin_serial.h - Blackfin UART/Serial definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_SERIAL_H__
+#define __BFIN_MACH_SERIAL_H__
+
+#define BFIN_UART_NR_PORTS	2
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/blackfin.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/blackfin.h
new file mode 100644
index 0000000..e1d2792
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/blackfin.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#include "bf527.h"
+#include "anomaly.h"
+
+#include <asm/def_LPBlackfin.h>
+#if defined(CONFIG_BF523) || defined(CONFIG_BF522)
+# include "defBF522.h"
+#endif
+#if defined(CONFIG_BF525) || defined(CONFIG_BF524)
+# include "defBF525.h"
+#endif
+#if defined(CONFIG_BF527) || defined(CONFIG_BF526)
+# include "defBF527.h"
+#endif
+
+#if !defined(__ASSEMBLY__)
+# include <asm/cdef_LPBlackfin.h>
+# if defined(CONFIG_BF523) || defined(CONFIG_BF522)
+#  include "cdefBF522.h"
+# endif
+# if defined(CONFIG_BF525) || defined(CONFIG_BF524)
+#  include "cdefBF525.h"
+# endif
+# if defined(CONFIG_BF527) || defined(CONFIG_BF526)
+#  include "cdefBF527.h"
+# endif
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/cdefBF522.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
new file mode 100644
index 0000000..2c12e87
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
@@ -0,0 +1,1095 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _CDEF_BF522_H
+#define _CDEF_BF522_H
+
+/* Clock and System Control	(0xFFC00000 - 0xFFC000FF)								*/
+#define bfin_read_PLL_CTL()			bfin_read16(PLL_CTL)
+#define bfin_read_PLL_DIV()			bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val)			bfin_write16(PLL_DIV, val)
+#define bfin_read_VR_CTL()			bfin_read16(VR_CTL)
+#define bfin_read_PLL_STAT()			bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val)		bfin_write16(PLL_STAT, val)
+#define bfin_read_PLL_LOCKCNT()			bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val)		bfin_write16(PLL_LOCKCNT, val)
+#define bfin_read_CHIPID()			bfin_read32(CHIPID)
+#define bfin_write_CHIPID(val)			bfin_write32(CHIPID, val)
+
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF)							*/
+#define bfin_read_SWRST()			bfin_read16(SWRST)
+#define bfin_write_SWRST(val)			bfin_write16(SWRST, val)
+#define bfin_read_SYSCR()			bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val)			bfin_write16(SYSCR, val)
+
+#define bfin_read_SIC_RVECT()			bfin_read32(SIC_RVECT)
+#define bfin_write_SIC_RVECT(val)		bfin_write32(SIC_RVECT, val)
+#define bfin_read_SIC_IMASK0()			bfin_read32(SIC_IMASK0)
+#define bfin_write_SIC_IMASK0(val)		bfin_write32(SIC_IMASK0, val)
+#define bfin_read_SIC_IMASK(x)			bfin_read32(SIC_IMASK0 + (x << 6))
+#define bfin_write_SIC_IMASK(x, val)		bfin_write32((SIC_IMASK0 + (x << 6)), val)
+
+#define bfin_read_SIC_IAR0()			bfin_read32(SIC_IAR0)
+#define bfin_write_SIC_IAR0(val)		bfin_write32(SIC_IAR0, val)
+#define bfin_read_SIC_IAR1()			bfin_read32(SIC_IAR1)
+#define bfin_write_SIC_IAR1(val)		bfin_write32(SIC_IAR1, val)
+#define bfin_read_SIC_IAR2()			bfin_read32(SIC_IAR2)
+#define bfin_write_SIC_IAR2(val)		bfin_write32(SIC_IAR2, val)
+#define bfin_read_SIC_IAR3()			bfin_read32(SIC_IAR3)
+#define bfin_write_SIC_IAR3(val)		bfin_write32(SIC_IAR3, val)
+
+#define bfin_read_SIC_ISR0()			bfin_read32(SIC_ISR0)
+#define bfin_write_SIC_ISR0(val)		bfin_write32(SIC_ISR0, val)
+#define bfin_read_SIC_ISR(x)			bfin_read32(SIC_ISR0 + (x << 6))
+#define bfin_write_SIC_ISR(x, val)		bfin_write32((SIC_ISR0 + (x << 6)), val)
+
+#define bfin_read_SIC_IWR0()			bfin_read32(SIC_IWR0)
+#define bfin_write_SIC_IWR0(val)		bfin_write32(SIC_IWR0, val)
+#define bfin_read_SIC_IWR(x)			bfin_read32(SIC_IWR0 + (x << 6))
+#define bfin_write_SIC_IWR(x, val)		bfin_write32((SIC_IWR0 + (x << 6)), val)
+
+/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */
+
+#define bfin_read_SIC_IMASK1()			bfin_read32(SIC_IMASK1)
+#define bfin_write_SIC_IMASK1(val)		bfin_write32(SIC_IMASK1, val)
+#define bfin_read_SIC_IAR4()			bfin_read32(SIC_IAR4)
+#define bfin_write_SIC_IAR4(val)		bfin_write32(SIC_IAR4, val)
+#define bfin_read_SIC_IAR5()			bfin_read32(SIC_IAR5)
+#define bfin_write_SIC_IAR5(val)		bfin_write32(SIC_IAR5, val)
+#define bfin_read_SIC_IAR6()			bfin_read32(SIC_IAR6)
+#define bfin_write_SIC_IAR6(val)		bfin_write32(SIC_IAR6, val)
+#define bfin_read_SIC_IAR7()			bfin_read32(SIC_IAR7)
+#define bfin_write_SIC_IAR7(val)		bfin_write32(SIC_IAR7, val)
+#define bfin_read_SIC_ISR1()			bfin_read32(SIC_ISR1)
+#define bfin_write_SIC_ISR1(val)		bfin_write32(SIC_ISR1, val)
+#define bfin_read_SIC_IWR1()			bfin_read32(SIC_IWR1)
+#define bfin_write_SIC_IWR1(val)		bfin_write32(SIC_IWR1, val)
+
+/* Watchdog Timer		(0xFFC00200 - 0xFFC002FF)									*/
+#define bfin_read_WDOG_CTL()			bfin_read16(WDOG_CTL)
+#define bfin_write_WDOG_CTL(val)		bfin_write16(WDOG_CTL, val)
+#define bfin_read_WDOG_CNT()			bfin_read32(WDOG_CNT)
+#define bfin_write_WDOG_CNT(val)		bfin_write32(WDOG_CNT, val)
+#define bfin_read_WDOG_STAT()			bfin_read32(WDOG_STAT)
+#define bfin_write_WDOG_STAT(val)		bfin_write32(WDOG_STAT, val)
+
+
+/* Real Time Clock		(0xFFC00300 - 0xFFC003FF)									*/
+#define bfin_read_RTC_STAT()			bfin_read32(RTC_STAT)
+#define bfin_write_RTC_STAT(val)		bfin_write32(RTC_STAT, val)
+#define bfin_read_RTC_ICTL()			bfin_read16(RTC_ICTL)
+#define bfin_write_RTC_ICTL(val)		bfin_write16(RTC_ICTL, val)
+#define bfin_read_RTC_ISTAT()			bfin_read16(RTC_ISTAT)
+#define bfin_write_RTC_ISTAT(val)		bfin_write16(RTC_ISTAT, val)
+#define bfin_read_RTC_SWCNT()			bfin_read16(RTC_SWCNT)
+#define bfin_write_RTC_SWCNT(val)		bfin_write16(RTC_SWCNT, val)
+#define bfin_read_RTC_ALARM()			bfin_read32(RTC_ALARM)
+#define bfin_write_RTC_ALARM(val)		bfin_write32(RTC_ALARM, val)
+#define bfin_read_RTC_FAST()			bfin_read16(RTC_FAST)
+#define bfin_write_RTC_FAST(val)		bfin_write16(RTC_FAST, val)
+#define bfin_read_RTC_PREN()			bfin_read16(RTC_PREN)
+#define bfin_write_RTC_PREN(val)		bfin_write16(RTC_PREN, val)
+
+
+/* UART0 Controller		(0xFFC00400 - 0xFFC004FF)									*/
+#define bfin_read_UART0_THR()			bfin_read16(UART0_THR)
+#define bfin_write_UART0_THR(val)		bfin_write16(UART0_THR, val)
+#define bfin_read_UART0_RBR()			bfin_read16(UART0_RBR)
+#define bfin_write_UART0_RBR(val)		bfin_write16(UART0_RBR, val)
+#define bfin_read_UART0_DLL()			bfin_read16(UART0_DLL)
+#define bfin_write_UART0_DLL(val)		bfin_write16(UART0_DLL, val)
+#define bfin_read_UART0_IER()			bfin_read16(UART0_IER)
+#define bfin_write_UART0_IER(val)		bfin_write16(UART0_IER, val)
+#define bfin_read_UART0_DLH()			bfin_read16(UART0_DLH)
+#define bfin_write_UART0_DLH(val)		bfin_write16(UART0_DLH, val)
+#define bfin_read_UART0_IIR()			bfin_read16(UART0_IIR)
+#define bfin_write_UART0_IIR(val)		bfin_write16(UART0_IIR, val)
+#define bfin_read_UART0_LCR()			bfin_read16(UART0_LCR)
+#define bfin_write_UART0_LCR(val)		bfin_write16(UART0_LCR, val)
+#define bfin_read_UART0_MCR()			bfin_read16(UART0_MCR)
+#define bfin_write_UART0_MCR(val)		bfin_write16(UART0_MCR, val)
+#define bfin_read_UART0_LSR()			bfin_read16(UART0_LSR)
+#define bfin_write_UART0_LSR(val)		bfin_write16(UART0_LSR, val)
+#define bfin_read_UART0_MSR()			bfin_read16(UART0_MSR)
+#define bfin_write_UART0_MSR(val)		bfin_write16(UART0_MSR, val)
+#define bfin_read_UART0_SCR()			bfin_read16(UART0_SCR)
+#define bfin_write_UART0_SCR(val)		bfin_write16(UART0_SCR, val)
+#define bfin_read_UART0_GCTL()			bfin_read16(UART0_GCTL)
+#define bfin_write_UART0_GCTL(val)		bfin_write16(UART0_GCTL, val)
+
+
+/* SPI Controller		(0xFFC00500 - 0xFFC005FF)									*/
+#define bfin_read_SPI_CTL()			bfin_read16(SPI_CTL)
+#define bfin_write_SPI_CTL(val)			bfin_write16(SPI_CTL, val)
+#define bfin_read_SPI_FLG()			bfin_read16(SPI_FLG)
+#define bfin_write_SPI_FLG(val)			bfin_write16(SPI_FLG, val)
+#define bfin_read_SPI_STAT()			bfin_read16(SPI_STAT)
+#define bfin_write_SPI_STAT(val)		bfin_write16(SPI_STAT, val)
+#define bfin_read_SPI_TDBR()			bfin_read16(SPI_TDBR)
+#define bfin_write_SPI_TDBR(val)		bfin_write16(SPI_TDBR, val)
+#define bfin_read_SPI_RDBR()			bfin_read16(SPI_RDBR)
+#define bfin_write_SPI_RDBR(val)		bfin_write16(SPI_RDBR, val)
+#define bfin_read_SPI_BAUD()			bfin_read16(SPI_BAUD)
+#define bfin_write_SPI_BAUD(val)		bfin_write16(SPI_BAUD, val)
+#define bfin_read_SPI_SHADOW()			bfin_read16(SPI_SHADOW)
+#define bfin_write_SPI_SHADOW(val)		bfin_write16(SPI_SHADOW, val)
+
+
+/* TIMER0-7 Registers		(0xFFC00600 - 0xFFC006FF)								*/
+#define bfin_read_TIMER0_CONFIG()		bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val)		bfin_write16(TIMER0_CONFIG, val)
+#define bfin_read_TIMER0_COUNTER()		bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val)		bfin_write32(TIMER0_COUNTER, val)
+#define bfin_read_TIMER0_PERIOD()		bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val)		bfin_write32(TIMER0_PERIOD, val)
+#define bfin_read_TIMER0_WIDTH()		bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val)		bfin_write32(TIMER0_WIDTH, val)
+
+#define bfin_read_TIMER1_CONFIG()		bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val)		bfin_write16(TIMER1_CONFIG, val)
+#define bfin_read_TIMER1_COUNTER()		bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val)		bfin_write32(TIMER1_COUNTER, val)
+#define bfin_read_TIMER1_PERIOD()		bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val)		bfin_write32(TIMER1_PERIOD, val)
+#define bfin_read_TIMER1_WIDTH()		bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val)		bfin_write32(TIMER1_WIDTH, val)
+
+#define bfin_read_TIMER2_CONFIG()		bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val)		bfin_write16(TIMER2_CONFIG, val)
+#define bfin_read_TIMER2_COUNTER()		bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val)		bfin_write32(TIMER2_COUNTER, val)
+#define bfin_read_TIMER2_PERIOD()		bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val)		bfin_write32(TIMER2_PERIOD, val)
+#define bfin_read_TIMER2_WIDTH()		bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val)		bfin_write32(TIMER2_WIDTH, val)
+
+#define bfin_read_TIMER3_CONFIG()		bfin_read16(TIMER3_CONFIG)
+#define bfin_write_TIMER3_CONFIG(val)		bfin_write16(TIMER3_CONFIG, val)
+#define bfin_read_TIMER3_COUNTER()		bfin_read32(TIMER3_COUNTER)
+#define bfin_write_TIMER3_COUNTER(val)		bfin_write32(TIMER3_COUNTER, val)
+#define bfin_read_TIMER3_PERIOD()		bfin_read32(TIMER3_PERIOD)
+#define bfin_write_TIMER3_PERIOD(val)		bfin_write32(TIMER3_PERIOD, val)
+#define bfin_read_TIMER3_WIDTH()		bfin_read32(TIMER3_WIDTH)
+#define bfin_write_TIMER3_WIDTH(val)		bfin_write32(TIMER3_WIDTH, val)
+
+#define bfin_read_TIMER4_CONFIG()		bfin_read16(TIMER4_CONFIG)
+#define bfin_write_TIMER4_CONFIG(val)		bfin_write16(TIMER4_CONFIG, val)
+#define bfin_read_TIMER4_COUNTER()		bfin_read32(TIMER4_COUNTER)
+#define bfin_write_TIMER4_COUNTER(val)		bfin_write32(TIMER4_COUNTER, val)
+#define bfin_read_TIMER4_PERIOD()		bfin_read32(TIMER4_PERIOD)
+#define bfin_write_TIMER4_PERIOD(val)		bfin_write32(TIMER4_PERIOD, val)
+#define bfin_read_TIMER4_WIDTH()		bfin_read32(TIMER4_WIDTH)
+#define bfin_write_TIMER4_WIDTH(val)		bfin_write32(TIMER4_WIDTH, val)
+
+#define bfin_read_TIMER5_CONFIG()		bfin_read16(TIMER5_CONFIG)
+#define bfin_write_TIMER5_CONFIG(val)		bfin_write16(TIMER5_CONFIG, val)
+#define bfin_read_TIMER5_COUNTER()		bfin_read32(TIMER5_COUNTER)
+#define bfin_write_TIMER5_COUNTER(val)		bfin_write32(TIMER5_COUNTER, val)
+#define bfin_read_TIMER5_PERIOD()		bfin_read32(TIMER5_PERIOD)
+#define bfin_write_TIMER5_PERIOD(val)		bfin_write32(TIMER5_PERIOD, val)
+#define bfin_read_TIMER5_WIDTH()		bfin_read32(TIMER5_WIDTH)
+#define bfin_write_TIMER5_WIDTH(val)		bfin_write32(TIMER5_WIDTH, val)
+
+#define bfin_read_TIMER6_CONFIG()		bfin_read16(TIMER6_CONFIG)
+#define bfin_write_TIMER6_CONFIG(val)		bfin_write16(TIMER6_CONFIG, val)
+#define bfin_read_TIMER6_COUNTER()		bfin_read32(TIMER6_COUNTER)
+#define bfin_write_TIMER6_COUNTER(val)		bfin_write32(TIMER6_COUNTER, val)
+#define bfin_read_TIMER6_PERIOD()		bfin_read32(TIMER6_PERIOD)
+#define bfin_write_TIMER6_PERIOD(val)		bfin_write32(TIMER6_PERIOD, val)
+#define bfin_read_TIMER6_WIDTH()		bfin_read32(TIMER6_WIDTH)
+#define bfin_write_TIMER6_WIDTH(val)		bfin_write32(TIMER6_WIDTH, val)
+
+#define bfin_read_TIMER7_CONFIG()		bfin_read16(TIMER7_CONFIG)
+#define bfin_write_TIMER7_CONFIG(val)		bfin_write16(TIMER7_CONFIG, val)
+#define bfin_read_TIMER7_COUNTER()		bfin_read32(TIMER7_COUNTER)
+#define bfin_write_TIMER7_COUNTER(val)		bfin_write32(TIMER7_COUNTER, val)
+#define bfin_read_TIMER7_PERIOD()		bfin_read32(TIMER7_PERIOD)
+#define bfin_write_TIMER7_PERIOD(val)		bfin_write32(TIMER7_PERIOD, val)
+#define bfin_read_TIMER7_WIDTH()		bfin_read32(TIMER7_WIDTH)
+#define bfin_write_TIMER7_WIDTH(val)		bfin_write32(TIMER7_WIDTH, val)
+
+#define bfin_read_TIMER_ENABLE()		bfin_read16(TIMER_ENABLE)
+#define bfin_write_TIMER_ENABLE(val)		bfin_write16(TIMER_ENABLE, val)
+#define bfin_read_TIMER_DISABLE()		bfin_read16(TIMER_DISABLE)
+#define bfin_write_TIMER_DISABLE(val)		bfin_write16(TIMER_DISABLE, val)
+#define bfin_read_TIMER_STATUS()		bfin_read32(TIMER_STATUS)
+#define bfin_write_TIMER_STATUS(val)		bfin_write32(TIMER_STATUS, val)
+
+
+/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF)								*/
+#define bfin_read_PORTFIO()			bfin_read16(PORTFIO)
+#define bfin_write_PORTFIO(val)			bfin_write16(PORTFIO, val)
+#define bfin_read_PORTFIO_CLEAR()		bfin_read16(PORTFIO_CLEAR)
+#define bfin_write_PORTFIO_CLEAR(val)		bfin_write16(PORTFIO_CLEAR, val)
+#define bfin_read_PORTFIO_SET()			bfin_read16(PORTFIO_SET)
+#define bfin_write_PORTFIO_SET(val)		bfin_write16(PORTFIO_SET, val)
+#define bfin_read_PORTFIO_TOGGLE()		bfin_read16(PORTFIO_TOGGLE)
+#define bfin_write_PORTFIO_TOGGLE(val)		bfin_write16(PORTFIO_TOGGLE, val)
+#define bfin_read_PORTFIO_MASKA()		bfin_read16(PORTFIO_MASKA)
+#define bfin_write_PORTFIO_MASKA(val)		bfin_write16(PORTFIO_MASKA, val)
+#define bfin_read_PORTFIO_MASKA_CLEAR()		bfin_read16(PORTFIO_MASKA_CLEAR)
+#define bfin_write_PORTFIO_MASKA_CLEAR(val)	bfin_write16(PORTFIO_MASKA_CLEAR, val)
+#define bfin_read_PORTFIO_MASKA_SET()		bfin_read16(PORTFIO_MASKA_SET)
+#define bfin_write_PORTFIO_MASKA_SET(val)	bfin_write16(PORTFIO_MASKA_SET, val)
+#define bfin_read_PORTFIO_MASKA_TOGGLE()	bfin_read16(PORTFIO_MASKA_TOGGLE)
+#define bfin_write_PORTFIO_MASKA_TOGGLE(val)	bfin_write16(PORTFIO_MASKA_TOGGLE, val)
+#define bfin_read_PORTFIO_MASKB()		bfin_read16(PORTFIO_MASKB)
+#define bfin_write_PORTFIO_MASKB(val)		bfin_write16(PORTFIO_MASKB, val)
+#define bfin_read_PORTFIO_MASKB_CLEAR()		bfin_read16(PORTFIO_MASKB_CLEAR)
+#define bfin_write_PORTFIO_MASKB_CLEAR(val)	bfin_write16(PORTFIO_MASKB_CLEAR, val)
+#define bfin_read_PORTFIO_MASKB_SET()		bfin_read16(PORTFIO_MASKB_SET)
+#define bfin_write_PORTFIO_MASKB_SET(val)	bfin_write16(PORTFIO_MASKB_SET, val)
+#define bfin_read_PORTFIO_MASKB_TOGGLE()	bfin_read16(PORTFIO_MASKB_TOGGLE)
+#define bfin_write_PORTFIO_MASKB_TOGGLE(val)	bfin_write16(PORTFIO_MASKB_TOGGLE, val)
+#define bfin_read_PORTFIO_DIR()			bfin_read16(PORTFIO_DIR)
+#define bfin_write_PORTFIO_DIR(val)		bfin_write16(PORTFIO_DIR, val)
+#define bfin_read_PORTFIO_POLAR()		bfin_read16(PORTFIO_POLAR)
+#define bfin_write_PORTFIO_POLAR(val)		bfin_write16(PORTFIO_POLAR, val)
+#define bfin_read_PORTFIO_EDGE()		bfin_read16(PORTFIO_EDGE)
+#define bfin_write_PORTFIO_EDGE(val)		bfin_write16(PORTFIO_EDGE, val)
+#define bfin_read_PORTFIO_BOTH()		bfin_read16(PORTFIO_BOTH)
+#define bfin_write_PORTFIO_BOTH(val)		bfin_write16(PORTFIO_BOTH, val)
+#define bfin_read_PORTFIO_INEN()		bfin_read16(PORTFIO_INEN)
+#define bfin_write_PORTFIO_INEN(val)		bfin_write16(PORTFIO_INEN, val)
+
+
+/* SPORT0 Controller		(0xFFC00800 - 0xFFC008FF)								*/
+#define bfin_read_SPORT0_TCR1()			bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val)		bfin_write16(SPORT0_TCR1, val)
+#define bfin_read_SPORT0_TCR2()			bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val)		bfin_write16(SPORT0_TCR2, val)
+#define bfin_read_SPORT0_TCLKDIV()		bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val)		bfin_write16(SPORT0_TCLKDIV, val)
+#define bfin_read_SPORT0_TFSDIV()		bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val)		bfin_write16(SPORT0_TFSDIV, val)
+#define bfin_read_SPORT0_TX()			bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val)		bfin_write32(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX()			bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val)		bfin_write32(SPORT0_RX, val)
+#define bfin_read_SPORT0_TX32()			bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX32(val)		bfin_write32(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX32()			bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX32(val)		bfin_write32(SPORT0_RX, val)
+#define bfin_read_SPORT0_TX16()			bfin_read16(SPORT0_TX)
+#define bfin_write_SPORT0_TX16(val)		bfin_write16(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX16()			bfin_read16(SPORT0_RX)
+#define bfin_write_SPORT0_RX16(val)		bfin_write16(SPORT0_RX, val)
+#define bfin_read_SPORT0_RCR1()			bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val)		bfin_write16(SPORT0_RCR1, val)
+#define bfin_read_SPORT0_RCR2()			bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val)		bfin_write16(SPORT0_RCR2, val)
+#define bfin_read_SPORT0_RCLKDIV()		bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val)		bfin_write16(SPORT0_RCLKDIV, val)
+#define bfin_read_SPORT0_RFSDIV()		bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val)		bfin_write16(SPORT0_RFSDIV, val)
+#define bfin_read_SPORT0_STAT()			bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val)		bfin_write16(SPORT0_STAT, val)
+#define bfin_read_SPORT0_CHNL()			bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val)		bfin_write16(SPORT0_CHNL, val)
+#define bfin_read_SPORT0_MCMC1()		bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val)		bfin_write16(SPORT0_MCMC1, val)
+#define bfin_read_SPORT0_MCMC2()		bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val)		bfin_write16(SPORT0_MCMC2, val)
+#define bfin_read_SPORT0_MTCS0()		bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val)		bfin_write32(SPORT0_MTCS0, val)
+#define bfin_read_SPORT0_MTCS1()		bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val)		bfin_write32(SPORT0_MTCS1, val)
+#define bfin_read_SPORT0_MTCS2()		bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val)		bfin_write32(SPORT0_MTCS2, val)
+#define bfin_read_SPORT0_MTCS3()		bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val)		bfin_write32(SPORT0_MTCS3, val)
+#define bfin_read_SPORT0_MRCS0()		bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val)		bfin_write32(SPORT0_MRCS0, val)
+#define bfin_read_SPORT0_MRCS1()		bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val)		bfin_write32(SPORT0_MRCS1, val)
+#define bfin_read_SPORT0_MRCS2()		bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val)		bfin_write32(SPORT0_MRCS2, val)
+#define bfin_read_SPORT0_MRCS3()		bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val)		bfin_write32(SPORT0_MRCS3, val)
+
+
+/* SPORT1 Controller		(0xFFC00900 - 0xFFC009FF)								*/
+#define bfin_read_SPORT1_TCR1()			bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val)		bfin_write16(SPORT1_TCR1, val)
+#define bfin_read_SPORT1_TCR2()			bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val)		bfin_write16(SPORT1_TCR2, val)
+#define bfin_read_SPORT1_TCLKDIV()		bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val)		bfin_write16(SPORT1_TCLKDIV, val)
+#define bfin_read_SPORT1_TFSDIV()		bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val)		bfin_write16(SPORT1_TFSDIV, val)
+#define bfin_read_SPORT1_TX()			bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val)		bfin_write32(SPORT1_TX, val)
+#define bfin_read_SPORT1_RX()			bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val)		bfin_write32(SPORT1_RX, val)
+#define bfin_read_SPORT1_TX32()			bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX32(val)		bfin_write32(SPORT1_TX, val)
+#define bfin_read_SPORT1_RX32()			bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX32(val)		bfin_write32(SPORT1_RX, val)
+#define bfin_read_SPORT1_TX16()			bfin_read16(SPORT1_TX)
+#define bfin_write_SPORT1_TX16(val)		bfin_write16(SPORT1_TX, val)
+#define bfin_read_SPORT1_RX16()			bfin_read16(SPORT1_RX)
+#define bfin_write_SPORT1_RX16(val)		bfin_write16(SPORT1_RX, val)
+#define bfin_read_SPORT1_RCR1()			bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val)		bfin_write16(SPORT1_RCR1, val)
+#define bfin_read_SPORT1_RCR2()			bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val)		bfin_write16(SPORT1_RCR2, val)
+#define bfin_read_SPORT1_RCLKDIV()		bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val)		bfin_write16(SPORT1_RCLKDIV, val)
+#define bfin_read_SPORT1_RFSDIV()		bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val)		bfin_write16(SPORT1_RFSDIV, val)
+#define bfin_read_SPORT1_STAT()			bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val)		bfin_write16(SPORT1_STAT, val)
+#define bfin_read_SPORT1_CHNL()			bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val)		bfin_write16(SPORT1_CHNL, val)
+#define bfin_read_SPORT1_MCMC1()		bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val)		bfin_write16(SPORT1_MCMC1, val)
+#define bfin_read_SPORT1_MCMC2()		bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val)		bfin_write16(SPORT1_MCMC2, val)
+#define bfin_read_SPORT1_MTCS0()		bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val)		bfin_write32(SPORT1_MTCS0, val)
+#define bfin_read_SPORT1_MTCS1()		bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val)		bfin_write32(SPORT1_MTCS1, val)
+#define bfin_read_SPORT1_MTCS2()		bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val)		bfin_write32(SPORT1_MTCS2, val)
+#define bfin_read_SPORT1_MTCS3()		bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val)		bfin_write32(SPORT1_MTCS3, val)
+#define bfin_read_SPORT1_MRCS0()		bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val)		bfin_write32(SPORT1_MRCS0, val)
+#define bfin_read_SPORT1_MRCS1()		bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val)		bfin_write32(SPORT1_MRCS1, val)
+#define bfin_read_SPORT1_MRCS2()		bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val)		bfin_write32(SPORT1_MRCS2, val)
+#define bfin_read_SPORT1_MRCS3()		bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val)		bfin_write32(SPORT1_MRCS3, val)
+
+
+/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF)							*/
+#define bfin_read_EBIU_AMGCTL()			bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val)		bfin_write16(EBIU_AMGCTL, val)
+#define bfin_read_EBIU_AMBCTL0()		bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val)		bfin_write32(EBIU_AMBCTL0, val)
+#define bfin_read_EBIU_AMBCTL1()		bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val)		bfin_write32(EBIU_AMBCTL1, val)
+#define bfin_read_EBIU_SDGCTL()			bfin_read32(EBIU_SDGCTL)
+#define bfin_write_EBIU_SDGCTL(val)		bfin_write32(EBIU_SDGCTL, val)
+#define bfin_read_EBIU_SDBCTL()			bfin_read16(EBIU_SDBCTL)
+#define bfin_write_EBIU_SDBCTL(val)		bfin_write16(EBIU_SDBCTL, val)
+#define bfin_read_EBIU_SDRRC()			bfin_read16(EBIU_SDRRC)
+#define bfin_write_EBIU_SDRRC(val)		bfin_write16(EBIU_SDRRC, val)
+#define bfin_read_EBIU_SDSTAT()			bfin_read16(EBIU_SDSTAT)
+#define bfin_write_EBIU_SDSTAT(val)		bfin_write16(EBIU_SDSTAT, val)
+
+
+/* DMA Traffic Control Registers													*/
+#define bfin_read_DMAC_TC_PER()			bfin_read16(DMAC_TC_PER)
+#define bfin_write_DMAC_TC_PER(val)		bfin_write16(DMAC_TC_PER, val)
+#define bfin_read_DMAC_TC_CNT()			bfin_read16(DMAC_TC_CNT)
+#define bfin_write_DMAC_TC_CNT(val)		bfin_write16(DMAC_TC_CNT, val)
+
+/* DMA Controller																	*/
+#define bfin_read_DMA0_CONFIG()			bfin_read16(DMA0_CONFIG)
+#define bfin_write_DMA0_CONFIG(val)		bfin_write16(DMA0_CONFIG, val)
+#define bfin_read_DMA0_NEXT_DESC_PTR()		bfin_read32(DMA0_NEXT_DESC_PTR)
+#define bfin_write_DMA0_NEXT_DESC_PTR(val)	bfin_write32(DMA0_NEXT_DESC_PTR, val)
+#define bfin_read_DMA0_START_ADDR()		bfin_read32(DMA0_START_ADDR)
+#define bfin_write_DMA0_START_ADDR(val)		bfin_write32(DMA0_START_ADDR, val)
+#define bfin_read_DMA0_X_COUNT()		bfin_read16(DMA0_X_COUNT)
+#define bfin_write_DMA0_X_COUNT(val)		bfin_write16(DMA0_X_COUNT, val)
+#define bfin_read_DMA0_Y_COUNT()		bfin_read16(DMA0_Y_COUNT)
+#define bfin_write_DMA0_Y_COUNT(val)		bfin_write16(DMA0_Y_COUNT, val)
+#define bfin_read_DMA0_X_MODIFY()		bfin_read16(DMA0_X_MODIFY)
+#define bfin_write_DMA0_X_MODIFY(val)		bfin_write16(DMA0_X_MODIFY, val)
+#define bfin_read_DMA0_Y_MODIFY()		bfin_read16(DMA0_Y_MODIFY)
+#define bfin_write_DMA0_Y_MODIFY(val)		bfin_write16(DMA0_Y_MODIFY, val)
+#define bfin_read_DMA0_CURR_DESC_PTR()		bfin_read32(DMA0_CURR_DESC_PTR)
+#define bfin_write_DMA0_CURR_DESC_PTR(val)	bfin_write32(DMA0_CURR_DESC_PTR, val)
+#define bfin_read_DMA0_CURR_ADDR()		bfin_read32(DMA0_CURR_ADDR)
+#define bfin_write_DMA0_CURR_ADDR(val)		bfin_write32(DMA0_CURR_ADDR, val)
+#define bfin_read_DMA0_CURR_X_COUNT()		bfin_read16(DMA0_CURR_X_COUNT)
+#define bfin_write_DMA0_CURR_X_COUNT(val)	bfin_write16(DMA0_CURR_X_COUNT, val)
+#define bfin_read_DMA0_CURR_Y_COUNT()		bfin_read16(DMA0_CURR_Y_COUNT)
+#define bfin_write_DMA0_CURR_Y_COUNT(val)	bfin_write16(DMA0_CURR_Y_COUNT, val)
+#define bfin_read_DMA0_IRQ_STATUS()		bfin_read16(DMA0_IRQ_STATUS)
+#define bfin_write_DMA0_IRQ_STATUS(val)		bfin_write16(DMA0_IRQ_STATUS, val)
+#define bfin_read_DMA0_PERIPHERAL_MAP()		bfin_read16(DMA0_PERIPHERAL_MAP)
+#define bfin_write_DMA0_PERIPHERAL_MAP(val)	bfin_write16(DMA0_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA1_CONFIG()			bfin_read16(DMA1_CONFIG)
+#define bfin_write_DMA1_CONFIG(val)		bfin_write16(DMA1_CONFIG, val)
+#define bfin_read_DMA1_NEXT_DESC_PTR()		bfin_read32(DMA1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_NEXT_DESC_PTR(val)	bfin_write32(DMA1_NEXT_DESC_PTR, val)
+#define bfin_read_DMA1_START_ADDR()		bfin_read32(DMA1_START_ADDR)
+#define bfin_write_DMA1_START_ADDR(val)		bfin_write32(DMA1_START_ADDR, val)
+#define bfin_read_DMA1_X_COUNT()		bfin_read16(DMA1_X_COUNT)
+#define bfin_write_DMA1_X_COUNT(val)		bfin_write16(DMA1_X_COUNT, val)
+#define bfin_read_DMA1_Y_COUNT()		bfin_read16(DMA1_Y_COUNT)
+#define bfin_write_DMA1_Y_COUNT(val)		bfin_write16(DMA1_Y_COUNT, val)
+#define bfin_read_DMA1_X_MODIFY()		bfin_read16(DMA1_X_MODIFY)
+#define bfin_write_DMA1_X_MODIFY(val)		bfin_write16(DMA1_X_MODIFY, val)
+#define bfin_read_DMA1_Y_MODIFY()		bfin_read16(DMA1_Y_MODIFY)
+#define bfin_write_DMA1_Y_MODIFY(val)		bfin_write16(DMA1_Y_MODIFY, val)
+#define bfin_read_DMA1_CURR_DESC_PTR()		bfin_read32(DMA1_CURR_DESC_PTR)
+#define bfin_write_DMA1_CURR_DESC_PTR(val)	bfin_write32(DMA1_CURR_DESC_PTR, val)
+#define bfin_read_DMA1_CURR_ADDR()		bfin_read32(DMA1_CURR_ADDR)
+#define bfin_write_DMA1_CURR_ADDR(val)		bfin_write32(DMA1_CURR_ADDR, val)
+#define bfin_read_DMA1_CURR_X_COUNT()		bfin_read16(DMA1_CURR_X_COUNT)
+#define bfin_write_DMA1_CURR_X_COUNT(val)	bfin_write16(DMA1_CURR_X_COUNT, val)
+#define bfin_read_DMA1_CURR_Y_COUNT()		bfin_read16(DMA1_CURR_Y_COUNT)
+#define bfin_write_DMA1_CURR_Y_COUNT(val)	bfin_write16(DMA1_CURR_Y_COUNT, val)
+#define bfin_read_DMA1_IRQ_STATUS()		bfin_read16(DMA1_IRQ_STATUS)
+#define bfin_write_DMA1_IRQ_STATUS(val)		bfin_write16(DMA1_IRQ_STATUS, val)
+#define bfin_read_DMA1_PERIPHERAL_MAP()		bfin_read16(DMA1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_PERIPHERAL_MAP(val)	bfin_write16(DMA1_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA2_CONFIG()			bfin_read16(DMA2_CONFIG)
+#define bfin_write_DMA2_CONFIG(val)		bfin_write16(DMA2_CONFIG, val)
+#define bfin_read_DMA2_NEXT_DESC_PTR()		bfin_read32(DMA2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_NEXT_DESC_PTR(val)	bfin_write32(DMA2_NEXT_DESC_PTR, val)
+#define bfin_read_DMA2_START_ADDR()		bfin_read32(DMA2_START_ADDR)
+#define bfin_write_DMA2_START_ADDR(val)		bfin_write32(DMA2_START_ADDR, val)
+#define bfin_read_DMA2_X_COUNT()		bfin_read16(DMA2_X_COUNT)
+#define bfin_write_DMA2_X_COUNT(val)		bfin_write16(DMA2_X_COUNT, val)
+#define bfin_read_DMA2_Y_COUNT()		bfin_read16(DMA2_Y_COUNT)
+#define bfin_write_DMA2_Y_COUNT(val)		bfin_write16(DMA2_Y_COUNT, val)
+#define bfin_read_DMA2_X_MODIFY()		bfin_read16(DMA2_X_MODIFY)
+#define bfin_write_DMA2_X_MODIFY(val)		bfin_write16(DMA2_X_MODIFY, val)
+#define bfin_read_DMA2_Y_MODIFY()		bfin_read16(DMA2_Y_MODIFY)
+#define bfin_write_DMA2_Y_MODIFY(val)		bfin_write16(DMA2_Y_MODIFY, val)
+#define bfin_read_DMA2_CURR_DESC_PTR()		bfin_read32(DMA2_CURR_DESC_PTR)
+#define bfin_write_DMA2_CURR_DESC_PTR(val)	bfin_write32(DMA2_CURR_DESC_PTR, val)
+#define bfin_read_DMA2_CURR_ADDR()		bfin_read32(DMA2_CURR_ADDR)
+#define bfin_write_DMA2_CURR_ADDR(val)		bfin_write32(DMA2_CURR_ADDR, val)
+#define bfin_read_DMA2_CURR_X_COUNT()		bfin_read16(DMA2_CURR_X_COUNT)
+#define bfin_write_DMA2_CURR_X_COUNT(val)	bfin_write16(DMA2_CURR_X_COUNT, val)
+#define bfin_read_DMA2_CURR_Y_COUNT()		bfin_read16(DMA2_CURR_Y_COUNT)
+#define bfin_write_DMA2_CURR_Y_COUNT(val)	bfin_write16(DMA2_CURR_Y_COUNT, val)
+#define bfin_read_DMA2_IRQ_STATUS()		bfin_read16(DMA2_IRQ_STATUS)
+#define bfin_write_DMA2_IRQ_STATUS(val)		bfin_write16(DMA2_IRQ_STATUS, val)
+#define bfin_read_DMA2_PERIPHERAL_MAP()		bfin_read16(DMA2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_PERIPHERAL_MAP(val)	bfin_write16(DMA2_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA3_CONFIG()			bfin_read16(DMA3_CONFIG)
+#define bfin_write_DMA3_CONFIG(val)		bfin_write16(DMA3_CONFIG, val)
+#define bfin_read_DMA3_NEXT_DESC_PTR()		bfin_read32(DMA3_NEXT_DESC_PTR)
+#define bfin_write_DMA3_NEXT_DESC_PTR(val)	bfin_write32(DMA3_NEXT_DESC_PTR, val)
+#define bfin_read_DMA3_START_ADDR()		bfin_read32(DMA3_START_ADDR)
+#define bfin_write_DMA3_START_ADDR(val)		bfin_write32(DMA3_START_ADDR, val)
+#define bfin_read_DMA3_X_COUNT()		bfin_read16(DMA3_X_COUNT)
+#define bfin_write_DMA3_X_COUNT(val)		bfin_write16(DMA3_X_COUNT, val)
+#define bfin_read_DMA3_Y_COUNT()		bfin_read16(DMA3_Y_COUNT)
+#define bfin_write_DMA3_Y_COUNT(val)		bfin_write16(DMA3_Y_COUNT, val)
+#define bfin_read_DMA3_X_MODIFY()		bfin_read16(DMA3_X_MODIFY)
+#define bfin_write_DMA3_X_MODIFY(val)		bfin_write16(DMA3_X_MODIFY, val)
+#define bfin_read_DMA3_Y_MODIFY()		bfin_read16(DMA3_Y_MODIFY)
+#define bfin_write_DMA3_Y_MODIFY(val)		bfin_write16(DMA3_Y_MODIFY, val)
+#define bfin_read_DMA3_CURR_DESC_PTR()		bfin_read32(DMA3_CURR_DESC_PTR)
+#define bfin_write_DMA3_CURR_DESC_PTR(val)	bfin_write32(DMA3_CURR_DESC_PTR, val)
+#define bfin_read_DMA3_CURR_ADDR()		bfin_read32(DMA3_CURR_ADDR)
+#define bfin_write_DMA3_CURR_ADDR(val)		bfin_write32(DMA3_CURR_ADDR, val)
+#define bfin_read_DMA3_CURR_X_COUNT()		bfin_read16(DMA3_CURR_X_COUNT)
+#define bfin_write_DMA3_CURR_X_COUNT(val)	bfin_write16(DMA3_CURR_X_COUNT, val)
+#define bfin_read_DMA3_CURR_Y_COUNT()		bfin_read16(DMA3_CURR_Y_COUNT)
+#define bfin_write_DMA3_CURR_Y_COUNT(val)	bfin_write16(DMA3_CURR_Y_COUNT, val)
+#define bfin_read_DMA3_IRQ_STATUS()		bfin_read16(DMA3_IRQ_STATUS)
+#define bfin_write_DMA3_IRQ_STATUS(val)		bfin_write16(DMA3_IRQ_STATUS, val)
+#define bfin_read_DMA3_PERIPHERAL_MAP()		bfin_read16(DMA3_PERIPHERAL_MAP)
+#define bfin_write_DMA3_PERIPHERAL_MAP(val)	bfin_write16(DMA3_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA4_CONFIG()			bfin_read16(DMA4_CONFIG)
+#define bfin_write_DMA4_CONFIG(val)		bfin_write16(DMA4_CONFIG, val)
+#define bfin_read_DMA4_NEXT_DESC_PTR()		bfin_read32(DMA4_NEXT_DESC_PTR)
+#define bfin_write_DMA4_NEXT_DESC_PTR(val)	bfin_write32(DMA4_NEXT_DESC_PTR, val)
+#define bfin_read_DMA4_START_ADDR()		bfin_read32(DMA4_START_ADDR)
+#define bfin_write_DMA4_START_ADDR(val)		bfin_write32(DMA4_START_ADDR, val)
+#define bfin_read_DMA4_X_COUNT()		bfin_read16(DMA4_X_COUNT)
+#define bfin_write_DMA4_X_COUNT(val)		bfin_write16(DMA4_X_COUNT, val)
+#define bfin_read_DMA4_Y_COUNT()		bfin_read16(DMA4_Y_COUNT)
+#define bfin_write_DMA4_Y_COUNT(val)		bfin_write16(DMA4_Y_COUNT, val)
+#define bfin_read_DMA4_X_MODIFY()		bfin_read16(DMA4_X_MODIFY)
+#define bfin_write_DMA4_X_MODIFY(val)		bfin_write16(DMA4_X_MODIFY, val)
+#define bfin_read_DMA4_Y_MODIFY()		bfin_read16(DMA4_Y_MODIFY)
+#define bfin_write_DMA4_Y_MODIFY(val)		bfin_write16(DMA4_Y_MODIFY, val)
+#define bfin_read_DMA4_CURR_DESC_PTR()		bfin_read32(DMA4_CURR_DESC_PTR)
+#define bfin_write_DMA4_CURR_DESC_PTR(val)	bfin_write32(DMA4_CURR_DESC_PTR, val)
+#define bfin_read_DMA4_CURR_ADDR()		bfin_read32(DMA4_CURR_ADDR)
+#define bfin_write_DMA4_CURR_ADDR(val)		bfin_write32(DMA4_CURR_ADDR, val)
+#define bfin_read_DMA4_CURR_X_COUNT()		bfin_read16(DMA4_CURR_X_COUNT)
+#define bfin_write_DMA4_CURR_X_COUNT(val)	bfin_write16(DMA4_CURR_X_COUNT, val)
+#define bfin_read_DMA4_CURR_Y_COUNT()		bfin_read16(DMA4_CURR_Y_COUNT)
+#define bfin_write_DMA4_CURR_Y_COUNT(val)	bfin_write16(DMA4_CURR_Y_COUNT, val)
+#define bfin_read_DMA4_IRQ_STATUS()		bfin_read16(DMA4_IRQ_STATUS)
+#define bfin_write_DMA4_IRQ_STATUS(val)		bfin_write16(DMA4_IRQ_STATUS, val)
+#define bfin_read_DMA4_PERIPHERAL_MAP()		bfin_read16(DMA4_PERIPHERAL_MAP)
+#define bfin_write_DMA4_PERIPHERAL_MAP(val)	bfin_write16(DMA4_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA5_CONFIG()			bfin_read16(DMA5_CONFIG)
+#define bfin_write_DMA5_CONFIG(val)		bfin_write16(DMA5_CONFIG, val)
+#define bfin_read_DMA5_NEXT_DESC_PTR()		bfin_read32(DMA5_NEXT_DESC_PTR)
+#define bfin_write_DMA5_NEXT_DESC_PTR(val)	bfin_write32(DMA5_NEXT_DESC_PTR, val)
+#define bfin_read_DMA5_START_ADDR()		bfin_read32(DMA5_START_ADDR)
+#define bfin_write_DMA5_START_ADDR(val)		bfin_write32(DMA5_START_ADDR, val)
+#define bfin_read_DMA5_X_COUNT()		bfin_read16(DMA5_X_COUNT)
+#define bfin_write_DMA5_X_COUNT(val)		bfin_write16(DMA5_X_COUNT, val)
+#define bfin_read_DMA5_Y_COUNT()		bfin_read16(DMA5_Y_COUNT)
+#define bfin_write_DMA5_Y_COUNT(val)		bfin_write16(DMA5_Y_COUNT, val)
+#define bfin_read_DMA5_X_MODIFY()		bfin_read16(DMA5_X_MODIFY)
+#define bfin_write_DMA5_X_MODIFY(val)		bfin_write16(DMA5_X_MODIFY, val)
+#define bfin_read_DMA5_Y_MODIFY()		bfin_read16(DMA5_Y_MODIFY)
+#define bfin_write_DMA5_Y_MODIFY(val)		bfin_write16(DMA5_Y_MODIFY, val)
+#define bfin_read_DMA5_CURR_DESC_PTR()		bfin_read32(DMA5_CURR_DESC_PTR)
+#define bfin_write_DMA5_CURR_DESC_PTR(val)	bfin_write32(DMA5_CURR_DESC_PTR, val)
+#define bfin_read_DMA5_CURR_ADDR()		bfin_read32(DMA5_CURR_ADDR)
+#define bfin_write_DMA5_CURR_ADDR(val)		bfin_write32(DMA5_CURR_ADDR, val)
+#define bfin_read_DMA5_CURR_X_COUNT()		bfin_read16(DMA5_CURR_X_COUNT)
+#define bfin_write_DMA5_CURR_X_COUNT(val)	bfin_write16(DMA5_CURR_X_COUNT, val)
+#define bfin_read_DMA5_CURR_Y_COUNT()		bfin_read16(DMA5_CURR_Y_COUNT)
+#define bfin_write_DMA5_CURR_Y_COUNT(val)	bfin_write16(DMA5_CURR_Y_COUNT, val)
+#define bfin_read_DMA5_IRQ_STATUS()		bfin_read16(DMA5_IRQ_STATUS)
+#define bfin_write_DMA5_IRQ_STATUS(val)		bfin_write16(DMA5_IRQ_STATUS, val)
+#define bfin_read_DMA5_PERIPHERAL_MAP()		bfin_read16(DMA5_PERIPHERAL_MAP)
+#define bfin_write_DMA5_PERIPHERAL_MAP(val)	bfin_write16(DMA5_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA6_CONFIG()			bfin_read16(DMA6_CONFIG)
+#define bfin_write_DMA6_CONFIG(val)		bfin_write16(DMA6_CONFIG, val)
+#define bfin_read_DMA6_NEXT_DESC_PTR()		bfin_read32(DMA6_NEXT_DESC_PTR)
+#define bfin_write_DMA6_NEXT_DESC_PTR(val)	bfin_write32(DMA6_NEXT_DESC_PTR, val)
+#define bfin_read_DMA6_START_ADDR()		bfin_read32(DMA6_START_ADDR)
+#define bfin_write_DMA6_START_ADDR(val)		bfin_write32(DMA6_START_ADDR, val)
+#define bfin_read_DMA6_X_COUNT()		bfin_read16(DMA6_X_COUNT)
+#define bfin_write_DMA6_X_COUNT(val)		bfin_write16(DMA6_X_COUNT, val)
+#define bfin_read_DMA6_Y_COUNT()		bfin_read16(DMA6_Y_COUNT)
+#define bfin_write_DMA6_Y_COUNT(val)		bfin_write16(DMA6_Y_COUNT, val)
+#define bfin_read_DMA6_X_MODIFY()		bfin_read16(DMA6_X_MODIFY)
+#define bfin_write_DMA6_X_MODIFY(val)		bfin_write16(DMA6_X_MODIFY, val)
+#define bfin_read_DMA6_Y_MODIFY()		bfin_read16(DMA6_Y_MODIFY)
+#define bfin_write_DMA6_Y_MODIFY(val)		bfin_write16(DMA6_Y_MODIFY, val)
+#define bfin_read_DMA6_CURR_DESC_PTR()		bfin_read32(DMA6_CURR_DESC_PTR)
+#define bfin_write_DMA6_CURR_DESC_PTR(val)	bfin_write32(DMA6_CURR_DESC_PTR, val)
+#define bfin_read_DMA6_CURR_ADDR()		bfin_read32(DMA6_CURR_ADDR)
+#define bfin_write_DMA6_CURR_ADDR(val)		bfin_write32(DMA6_CURR_ADDR, val)
+#define bfin_read_DMA6_CURR_X_COUNT()		bfin_read16(DMA6_CURR_X_COUNT)
+#define bfin_write_DMA6_CURR_X_COUNT(val)	bfin_write16(DMA6_CURR_X_COUNT, val)
+#define bfin_read_DMA6_CURR_Y_COUNT()		bfin_read16(DMA6_CURR_Y_COUNT)
+#define bfin_write_DMA6_CURR_Y_COUNT(val)	bfin_write16(DMA6_CURR_Y_COUNT, val)
+#define bfin_read_DMA6_IRQ_STATUS()		bfin_read16(DMA6_IRQ_STATUS)
+#define bfin_write_DMA6_IRQ_STATUS(val)		bfin_write16(DMA6_IRQ_STATUS, val)
+#define bfin_read_DMA6_PERIPHERAL_MAP()		bfin_read16(DMA6_PERIPHERAL_MAP)
+#define bfin_write_DMA6_PERIPHERAL_MAP(val)	bfin_write16(DMA6_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA7_CONFIG()			bfin_read16(DMA7_CONFIG)
+#define bfin_write_DMA7_CONFIG(val)		bfin_write16(DMA7_CONFIG, val)
+#define bfin_read_DMA7_NEXT_DESC_PTR()		bfin_read32(DMA7_NEXT_DESC_PTR)
+#define bfin_write_DMA7_NEXT_DESC_PTR(val)	bfin_write32(DMA7_NEXT_DESC_PTR, val)
+#define bfin_read_DMA7_START_ADDR()		bfin_read32(DMA7_START_ADDR)
+#define bfin_write_DMA7_START_ADDR(val)		bfin_write32(DMA7_START_ADDR, val)
+#define bfin_read_DMA7_X_COUNT()		bfin_read16(DMA7_X_COUNT)
+#define bfin_write_DMA7_X_COUNT(val)		bfin_write16(DMA7_X_COUNT, val)
+#define bfin_read_DMA7_Y_COUNT()		bfin_read16(DMA7_Y_COUNT)
+#define bfin_write_DMA7_Y_COUNT(val)		bfin_write16(DMA7_Y_COUNT, val)
+#define bfin_read_DMA7_X_MODIFY()		bfin_read16(DMA7_X_MODIFY)
+#define bfin_write_DMA7_X_MODIFY(val)		bfin_write16(DMA7_X_MODIFY, val)
+#define bfin_read_DMA7_Y_MODIFY()		bfin_read16(DMA7_Y_MODIFY)
+#define bfin_write_DMA7_Y_MODIFY(val)		bfin_write16(DMA7_Y_MODIFY, val)
+#define bfin_read_DMA7_CURR_DESC_PTR()		bfin_read32(DMA7_CURR_DESC_PTR)
+#define bfin_write_DMA7_CURR_DESC_PTR(val)	bfin_write32(DMA7_CURR_DESC_PTR, val)
+#define bfin_read_DMA7_CURR_ADDR()		bfin_read32(DMA7_CURR_ADDR)
+#define bfin_write_DMA7_CURR_ADDR(val)		bfin_write32(DMA7_CURR_ADDR, val)
+#define bfin_read_DMA7_CURR_X_COUNT()		bfin_read16(DMA7_CURR_X_COUNT)
+#define bfin_write_DMA7_CURR_X_COUNT(val)	bfin_write16(DMA7_CURR_X_COUNT, val)
+#define bfin_read_DMA7_CURR_Y_COUNT()		bfin_read16(DMA7_CURR_Y_COUNT)
+#define bfin_write_DMA7_CURR_Y_COUNT(val)	bfin_write16(DMA7_CURR_Y_COUNT, val)
+#define bfin_read_DMA7_IRQ_STATUS()		bfin_read16(DMA7_IRQ_STATUS)
+#define bfin_write_DMA7_IRQ_STATUS(val)		bfin_write16(DMA7_IRQ_STATUS, val)
+#define bfin_read_DMA7_PERIPHERAL_MAP()		bfin_read16(DMA7_PERIPHERAL_MAP)
+#define bfin_write_DMA7_PERIPHERAL_MAP(val)	bfin_write16(DMA7_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA8_CONFIG()			bfin_read16(DMA8_CONFIG)
+#define bfin_write_DMA8_CONFIG(val)		bfin_write16(DMA8_CONFIG, val)
+#define bfin_read_DMA8_NEXT_DESC_PTR()		bfin_read32(DMA8_NEXT_DESC_PTR)
+#define bfin_write_DMA8_NEXT_DESC_PTR(val)	bfin_write32(DMA8_NEXT_DESC_PTR, val)
+#define bfin_read_DMA8_START_ADDR()		bfin_read32(DMA8_START_ADDR)
+#define bfin_write_DMA8_START_ADDR(val)		bfin_write32(DMA8_START_ADDR, val)
+#define bfin_read_DMA8_X_COUNT()		bfin_read16(DMA8_X_COUNT)
+#define bfin_write_DMA8_X_COUNT(val)		bfin_write16(DMA8_X_COUNT, val)
+#define bfin_read_DMA8_Y_COUNT()		bfin_read16(DMA8_Y_COUNT)
+#define bfin_write_DMA8_Y_COUNT(val)		bfin_write16(DMA8_Y_COUNT, val)
+#define bfin_read_DMA8_X_MODIFY()		bfin_read16(DMA8_X_MODIFY)
+#define bfin_write_DMA8_X_MODIFY(val)		bfin_write16(DMA8_X_MODIFY, val)
+#define bfin_read_DMA8_Y_MODIFY()		bfin_read16(DMA8_Y_MODIFY)
+#define bfin_write_DMA8_Y_MODIFY(val)		bfin_write16(DMA8_Y_MODIFY, val)
+#define bfin_read_DMA8_CURR_DESC_PTR()		bfin_read32(DMA8_CURR_DESC_PTR)
+#define bfin_write_DMA8_CURR_DESC_PTR(val)	bfin_write32(DMA8_CURR_DESC_PTR, val)
+#define bfin_read_DMA8_CURR_ADDR()		bfin_read32(DMA8_CURR_ADDR)
+#define bfin_write_DMA8_CURR_ADDR(val)		bfin_write32(DMA8_CURR_ADDR, val)
+#define bfin_read_DMA8_CURR_X_COUNT()		bfin_read16(DMA8_CURR_X_COUNT)
+#define bfin_write_DMA8_CURR_X_COUNT(val)	bfin_write16(DMA8_CURR_X_COUNT, val)
+#define bfin_read_DMA8_CURR_Y_COUNT()		bfin_read16(DMA8_CURR_Y_COUNT)
+#define bfin_write_DMA8_CURR_Y_COUNT(val)	bfin_write16(DMA8_CURR_Y_COUNT, val)
+#define bfin_read_DMA8_IRQ_STATUS()		bfin_read16(DMA8_IRQ_STATUS)
+#define bfin_write_DMA8_IRQ_STATUS(val)		bfin_write16(DMA8_IRQ_STATUS, val)
+#define bfin_read_DMA8_PERIPHERAL_MAP()		bfin_read16(DMA8_PERIPHERAL_MAP)
+#define bfin_write_DMA8_PERIPHERAL_MAP(val)	bfin_write16(DMA8_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA9_CONFIG()			bfin_read16(DMA9_CONFIG)
+#define bfin_write_DMA9_CONFIG(val)		bfin_write16(DMA9_CONFIG, val)
+#define bfin_read_DMA9_NEXT_DESC_PTR()		bfin_read32(DMA9_NEXT_DESC_PTR)
+#define bfin_write_DMA9_NEXT_DESC_PTR(val)	bfin_write32(DMA9_NEXT_DESC_PTR, val)
+#define bfin_read_DMA9_START_ADDR()		bfin_read32(DMA9_START_ADDR)
+#define bfin_write_DMA9_START_ADDR(val)		bfin_write32(DMA9_START_ADDR, val)
+#define bfin_read_DMA9_X_COUNT()		bfin_read16(DMA9_X_COUNT)
+#define bfin_write_DMA9_X_COUNT(val)		bfin_write16(DMA9_X_COUNT, val)
+#define bfin_read_DMA9_Y_COUNT()		bfin_read16(DMA9_Y_COUNT)
+#define bfin_write_DMA9_Y_COUNT(val)		bfin_write16(DMA9_Y_COUNT, val)
+#define bfin_read_DMA9_X_MODIFY()		bfin_read16(DMA9_X_MODIFY)
+#define bfin_write_DMA9_X_MODIFY(val)		bfin_write16(DMA9_X_MODIFY, val)
+#define bfin_read_DMA9_Y_MODIFY()		bfin_read16(DMA9_Y_MODIFY)
+#define bfin_write_DMA9_Y_MODIFY(val)		bfin_write16(DMA9_Y_MODIFY, val)
+#define bfin_read_DMA9_CURR_DESC_PTR()		bfin_read32(DMA9_CURR_DESC_PTR)
+#define bfin_write_DMA9_CURR_DESC_PTR(val)	bfin_write32(DMA9_CURR_DESC_PTR, val)
+#define bfin_read_DMA9_CURR_ADDR()		bfin_read32(DMA9_CURR_ADDR)
+#define bfin_write_DMA9_CURR_ADDR(val)		bfin_write32(DMA9_CURR_ADDR, val)
+#define bfin_read_DMA9_CURR_X_COUNT()		bfin_read16(DMA9_CURR_X_COUNT)
+#define bfin_write_DMA9_CURR_X_COUNT(val)	bfin_write16(DMA9_CURR_X_COUNT, val)
+#define bfin_read_DMA9_CURR_Y_COUNT()		bfin_read16(DMA9_CURR_Y_COUNT)
+#define bfin_write_DMA9_CURR_Y_COUNT(val)	bfin_write16(DMA9_CURR_Y_COUNT, val)
+#define bfin_read_DMA9_IRQ_STATUS()		bfin_read16(DMA9_IRQ_STATUS)
+#define bfin_write_DMA9_IRQ_STATUS(val)		bfin_write16(DMA9_IRQ_STATUS, val)
+#define bfin_read_DMA9_PERIPHERAL_MAP()		bfin_read16(DMA9_PERIPHERAL_MAP)
+#define bfin_write_DMA9_PERIPHERAL_MAP(val)	bfin_write16(DMA9_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA10_CONFIG()		bfin_read16(DMA10_CONFIG)
+#define bfin_write_DMA10_CONFIG(val)		bfin_write16(DMA10_CONFIG, val)
+#define bfin_read_DMA10_NEXT_DESC_PTR()		bfin_read32(DMA10_NEXT_DESC_PTR)
+#define bfin_write_DMA10_NEXT_DESC_PTR(val)	bfin_write32(DMA10_NEXT_DESC_PTR, val)
+#define bfin_read_DMA10_START_ADDR()		bfin_read32(DMA10_START_ADDR)
+#define bfin_write_DMA10_START_ADDR(val)	bfin_write32(DMA10_START_ADDR, val)
+#define bfin_read_DMA10_X_COUNT()		bfin_read16(DMA10_X_COUNT)
+#define bfin_write_DMA10_X_COUNT(val)		bfin_write16(DMA10_X_COUNT, val)
+#define bfin_read_DMA10_Y_COUNT()		bfin_read16(DMA10_Y_COUNT)
+#define bfin_write_DMA10_Y_COUNT(val)		bfin_write16(DMA10_Y_COUNT, val)
+#define bfin_read_DMA10_X_MODIFY()		bfin_read16(DMA10_X_MODIFY)
+#define bfin_write_DMA10_X_MODIFY(val)		bfin_write16(DMA10_X_MODIFY, val)
+#define bfin_read_DMA10_Y_MODIFY()		bfin_read16(DMA10_Y_MODIFY)
+#define bfin_write_DMA10_Y_MODIFY(val)		bfin_write16(DMA10_Y_MODIFY, val)
+#define bfin_read_DMA10_CURR_DESC_PTR()		bfin_read32(DMA10_CURR_DESC_PTR)
+#define bfin_write_DMA10_CURR_DESC_PTR(val)	bfin_write32(DMA10_CURR_DESC_PTR, val)
+#define bfin_read_DMA10_CURR_ADDR()		bfin_read32(DMA10_CURR_ADDR)
+#define bfin_write_DMA10_CURR_ADDR(val)		bfin_write32(DMA10_CURR_ADDR, val)
+#define bfin_read_DMA10_CURR_X_COUNT()		bfin_read16(DMA10_CURR_X_COUNT)
+#define bfin_write_DMA10_CURR_X_COUNT(val)	bfin_write16(DMA10_CURR_X_COUNT, val)
+#define bfin_read_DMA10_CURR_Y_COUNT()		bfin_read16(DMA10_CURR_Y_COUNT)
+#define bfin_write_DMA10_CURR_Y_COUNT(val)	bfin_write16(DMA10_CURR_Y_COUNT, val)
+#define bfin_read_DMA10_IRQ_STATUS()		bfin_read16(DMA10_IRQ_STATUS)
+#define bfin_write_DMA10_IRQ_STATUS(val)	bfin_write16(DMA10_IRQ_STATUS, val)
+#define bfin_read_DMA10_PERIPHERAL_MAP()	bfin_read16(DMA10_PERIPHERAL_MAP)
+#define bfin_write_DMA10_PERIPHERAL_MAP(val)	bfin_write16(DMA10_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA11_CONFIG()		bfin_read16(DMA11_CONFIG)
+#define bfin_write_DMA11_CONFIG(val)		bfin_write16(DMA11_CONFIG, val)
+#define bfin_read_DMA11_NEXT_DESC_PTR()		bfin_read32(DMA11_NEXT_DESC_PTR)
+#define bfin_write_DMA11_NEXT_DESC_PTR(val)	bfin_write32(DMA11_NEXT_DESC_PTR, val)
+#define bfin_read_DMA11_START_ADDR()		bfin_read32(DMA11_START_ADDR)
+#define bfin_write_DMA11_START_ADDR(val)	bfin_write32(DMA11_START_ADDR, val)
+#define bfin_read_DMA11_X_COUNT()		bfin_read16(DMA11_X_COUNT)
+#define bfin_write_DMA11_X_COUNT(val)		bfin_write16(DMA11_X_COUNT, val)
+#define bfin_read_DMA11_Y_COUNT()		bfin_read16(DMA11_Y_COUNT)
+#define bfin_write_DMA11_Y_COUNT(val)		bfin_write16(DMA11_Y_COUNT, val)
+#define bfin_read_DMA11_X_MODIFY()		bfin_read16(DMA11_X_MODIFY)
+#define bfin_write_DMA11_X_MODIFY(val)		bfin_write16(DMA11_X_MODIFY, val)
+#define bfin_read_DMA11_Y_MODIFY()		bfin_read16(DMA11_Y_MODIFY)
+#define bfin_write_DMA11_Y_MODIFY(val)		bfin_write16(DMA11_Y_MODIFY, val)
+#define bfin_read_DMA11_CURR_DESC_PTR()		bfin_read32(DMA11_CURR_DESC_PTR)
+#define bfin_write_DMA11_CURR_DESC_PTR(val)	bfin_write32(DMA11_CURR_DESC_PTR, val)
+#define bfin_read_DMA11_CURR_ADDR()		bfin_read32(DMA11_CURR_ADDR)
+#define bfin_write_DMA11_CURR_ADDR(val)		bfin_write32(DMA11_CURR_ADDR, val)
+#define bfin_read_DMA11_CURR_X_COUNT()		bfin_read16(DMA11_CURR_X_COUNT)
+#define bfin_write_DMA11_CURR_X_COUNT(val)	bfin_write16(DMA11_CURR_X_COUNT, val)
+#define bfin_read_DMA11_CURR_Y_COUNT()		bfin_read16(DMA11_CURR_Y_COUNT)
+#define bfin_write_DMA11_CURR_Y_COUNT(val)	bfin_write16(DMA11_CURR_Y_COUNT, val)
+#define bfin_read_DMA11_IRQ_STATUS()		bfin_read16(DMA11_IRQ_STATUS)
+#define bfin_write_DMA11_IRQ_STATUS(val)	bfin_write16(DMA11_IRQ_STATUS, val)
+#define bfin_read_DMA11_PERIPHERAL_MAP()	bfin_read16(DMA11_PERIPHERAL_MAP)
+#define bfin_write_DMA11_PERIPHERAL_MAP(val)	bfin_write16(DMA11_PERIPHERAL_MAP, val)
+
+#define bfin_read_MDMA_D0_CONFIG()		bfin_read16(MDMA_D0_CONFIG)
+#define bfin_write_MDMA_D0_CONFIG(val)		bfin_write16(MDMA_D0_CONFIG, val)
+#define bfin_read_MDMA_D0_NEXT_DESC_PTR()	bfin_read32(MDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val)	bfin_write32(MDMA_D0_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D0_START_ADDR()		bfin_read32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val)	bfin_write32(MDMA_D0_START_ADDR, val)
+#define bfin_read_MDMA_D0_X_COUNT()		bfin_read16(MDMA_D0_X_COUNT)
+#define bfin_write_MDMA_D0_X_COUNT(val)		bfin_write16(MDMA_D0_X_COUNT, val)
+#define bfin_read_MDMA_D0_Y_COUNT()		bfin_read16(MDMA_D0_Y_COUNT)
+#define bfin_write_MDMA_D0_Y_COUNT(val)		bfin_write16(MDMA_D0_Y_COUNT, val)
+#define bfin_read_MDMA_D0_X_MODIFY()		bfin_read16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val)	bfin_write16(MDMA_D0_X_MODIFY, val)
+#define bfin_read_MDMA_D0_Y_MODIFY()		bfin_read16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val)	bfin_write16(MDMA_D0_Y_MODIFY, val)
+#define bfin_read_MDMA_D0_CURR_DESC_PTR()	bfin_read32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val)	bfin_write32(MDMA_D0_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D0_CURR_ADDR()		bfin_read32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val)	bfin_write32(MDMA_D0_CURR_ADDR, val)
+#define bfin_read_MDMA_D0_CURR_X_COUNT()	bfin_read16(MDMA_D0_CURR_X_COUNT)
+#define bfin_write_MDMA_D0_CURR_X_COUNT(val)	bfin_write16(MDMA_D0_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D0_CURR_Y_COUNT()	bfin_read16(MDMA_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA_D0_CURR_Y_COUNT(val)	bfin_write16(MDMA_D0_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_D0_IRQ_STATUS()		bfin_read16(MDMA_D0_IRQ_STATUS)
+#define bfin_write_MDMA_D0_IRQ_STATUS(val)	bfin_write16(MDMA_D0_IRQ_STATUS, val)
+#define bfin_read_MDMA_D0_PERIPHERAL_MAP()	bfin_read16(MDMA_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val)	bfin_write16(MDMA_D0_PERIPHERAL_MAP, val)
+
+#define bfin_read_MDMA_S0_CONFIG()		bfin_read16(MDMA_S0_CONFIG)
+#define bfin_write_MDMA_S0_CONFIG(val)		bfin_write16(MDMA_S0_CONFIG, val)
+#define bfin_read_MDMA_S0_NEXT_DESC_PTR()	bfin_read32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val)	bfin_write32(MDMA_S0_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S0_START_ADDR()		bfin_read32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val)	bfin_write32(MDMA_S0_START_ADDR, val)
+#define bfin_read_MDMA_S0_X_COUNT()		bfin_read16(MDMA_S0_X_COUNT)
+#define bfin_write_MDMA_S0_X_COUNT(val)		bfin_write16(MDMA_S0_X_COUNT, val)
+#define bfin_read_MDMA_S0_Y_COUNT()		bfin_read16(MDMA_S0_Y_COUNT)
+#define bfin_write_MDMA_S0_Y_COUNT(val)		bfin_write16(MDMA_S0_Y_COUNT, val)
+#define bfin_read_MDMA_S0_X_MODIFY()		bfin_read16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val)	bfin_write16(MDMA_S0_X_MODIFY, val)
+#define bfin_read_MDMA_S0_Y_MODIFY()		bfin_read16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val)	bfin_write16(MDMA_S0_Y_MODIFY, val)
+#define bfin_read_MDMA_S0_CURR_DESC_PTR()	bfin_read32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val)	bfin_write32(MDMA_S0_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S0_CURR_ADDR()		bfin_read32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val)	bfin_write32(MDMA_S0_CURR_ADDR, val)
+#define bfin_read_MDMA_S0_CURR_X_COUNT()	bfin_read16(MDMA_S0_CURR_X_COUNT)
+#define bfin_write_MDMA_S0_CURR_X_COUNT(val)	bfin_write16(MDMA_S0_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S0_CURR_Y_COUNT()	bfin_read16(MDMA_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA_S0_CURR_Y_COUNT(val)	bfin_write16(MDMA_S0_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S0_IRQ_STATUS()		bfin_read16(MDMA_S0_IRQ_STATUS)
+#define bfin_write_MDMA_S0_IRQ_STATUS(val)	bfin_write16(MDMA_S0_IRQ_STATUS, val)
+#define bfin_read_MDMA_S0_PERIPHERAL_MAP()	bfin_read16(MDMA_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val)	bfin_write16(MDMA_S0_PERIPHERAL_MAP, val)
+
+#define bfin_read_MDMA_D1_CONFIG()		bfin_read16(MDMA_D1_CONFIG)
+#define bfin_write_MDMA_D1_CONFIG(val)		bfin_write16(MDMA_D1_CONFIG, val)
+#define bfin_read_MDMA_D1_NEXT_DESC_PTR()	bfin_read32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val)	bfin_write32(MDMA_D1_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D1_START_ADDR()		bfin_read32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val)	bfin_write32(MDMA_D1_START_ADDR, val)
+#define bfin_read_MDMA_D1_X_COUNT()		bfin_read16(MDMA_D1_X_COUNT)
+#define bfin_write_MDMA_D1_X_COUNT(val)		bfin_write16(MDMA_D1_X_COUNT, val)
+#define bfin_read_MDMA_D1_Y_COUNT()		bfin_read16(MDMA_D1_Y_COUNT)
+#define bfin_write_MDMA_D1_Y_COUNT(val)		bfin_write16(MDMA_D1_Y_COUNT, val)
+#define bfin_read_MDMA_D1_X_MODIFY()		bfin_read16(MDMA_D1_X_MODIFY)
+#define bfin_write_MDMA_D1_X_MODIFY(val)	bfin_write16(MDMA_D1_X_MODIFY, val)
+#define bfin_read_MDMA_D1_Y_MODIFY()		bfin_read16(MDMA_D1_Y_MODIFY)
+#define bfin_write_MDMA_D1_Y_MODIFY(val)	bfin_write16(MDMA_D1_Y_MODIFY, val)
+#define bfin_read_MDMA_D1_CURR_DESC_PTR()	bfin_read32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val)	bfin_write32(MDMA_D1_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D1_CURR_ADDR()		bfin_read32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val)	bfin_write32(MDMA_D1_CURR_ADDR, val)
+#define bfin_read_MDMA_D1_CURR_X_COUNT()	bfin_read16(MDMA_D1_CURR_X_COUNT)
+#define bfin_write_MDMA_D1_CURR_X_COUNT(val)	bfin_write16(MDMA_D1_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D1_CURR_Y_COUNT()	bfin_read16(MDMA_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA_D1_CURR_Y_COUNT(val)	bfin_write16(MDMA_D1_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()		bfin_read16(MDMA_D1_IRQ_STATUS)
+#define bfin_write_MDMA_D1_IRQ_STATUS(val)	bfin_write16(MDMA_D1_IRQ_STATUS, val)
+#define bfin_read_MDMA_D1_PERIPHERAL_MAP()	bfin_read16(MDMA_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val)	bfin_write16(MDMA_D1_PERIPHERAL_MAP, val)
+
+#define bfin_read_MDMA_S1_CONFIG()		bfin_read16(MDMA_S1_CONFIG)
+#define bfin_write_MDMA_S1_CONFIG(val)		bfin_write16(MDMA_S1_CONFIG, val)
+#define bfin_read_MDMA_S1_NEXT_DESC_PTR()	bfin_read32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val)	bfin_write32(MDMA_S1_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S1_START_ADDR()		bfin_read32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val)	bfin_write32(MDMA_S1_START_ADDR, val)
+#define bfin_read_MDMA_S1_X_COUNT()		bfin_read16(MDMA_S1_X_COUNT)
+#define bfin_write_MDMA_S1_X_COUNT(val)		bfin_write16(MDMA_S1_X_COUNT, val)
+#define bfin_read_MDMA_S1_Y_COUNT()		bfin_read16(MDMA_S1_Y_COUNT)
+#define bfin_write_MDMA_S1_Y_COUNT(val)		bfin_write16(MDMA_S1_Y_COUNT, val)
+#define bfin_read_MDMA_S1_X_MODIFY()		bfin_read16(MDMA_S1_X_MODIFY)
+#define bfin_write_MDMA_S1_X_MODIFY(val)	bfin_write16(MDMA_S1_X_MODIFY, val)
+#define bfin_read_MDMA_S1_Y_MODIFY()		bfin_read16(MDMA_S1_Y_MODIFY)
+#define bfin_write_MDMA_S1_Y_MODIFY(val)	bfin_write16(MDMA_S1_Y_MODIFY, val)
+#define bfin_read_MDMA_S1_CURR_DESC_PTR()	bfin_read32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val)	bfin_write32(MDMA_S1_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S1_CURR_ADDR()		bfin_read32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val)	bfin_write32(MDMA_S1_CURR_ADDR, val)
+#define bfin_read_MDMA_S1_CURR_X_COUNT()	bfin_read16(MDMA_S1_CURR_X_COUNT)
+#define bfin_write_MDMA_S1_CURR_X_COUNT(val)	bfin_write16(MDMA_S1_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S1_CURR_Y_COUNT()	bfin_read16(MDMA_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA_S1_CURR_Y_COUNT(val)	bfin_write16(MDMA_S1_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()		bfin_read16(MDMA_S1_IRQ_STATUS)
+#define bfin_write_MDMA_S1_IRQ_STATUS(val)	bfin_write16(MDMA_S1_IRQ_STATUS, val)
+#define bfin_read_MDMA_S1_PERIPHERAL_MAP()	bfin_read16(MDMA_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val)	bfin_write16(MDMA_S1_PERIPHERAL_MAP, val)
+
+
+/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF)							*/
+#define bfin_read_PPI_CONTROL()			bfin_read16(PPI_CONTROL)
+#define bfin_write_PPI_CONTROL(val)		bfin_write16(PPI_CONTROL, val)
+#define bfin_read_PPI_STATUS()			bfin_read16(PPI_STATUS)
+#define bfin_write_PPI_STATUS(val)		bfin_write16(PPI_STATUS, val)
+#define bfin_clear_PPI_STATUS()			bfin_write_PPI_STATUS(0xFFFF)
+#define bfin_read_PPI_DELAY()			bfin_read16(PPI_DELAY)
+#define bfin_write_PPI_DELAY(val)		bfin_write16(PPI_DELAY, val)
+#define bfin_read_PPI_COUNT()			bfin_read16(PPI_COUNT)
+#define bfin_write_PPI_COUNT(val)		bfin_write16(PPI_COUNT, val)
+#define bfin_read_PPI_FRAME()			bfin_read16(PPI_FRAME)
+#define bfin_write_PPI_FRAME(val)		bfin_write16(PPI_FRAME, val)
+
+
+/* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF)								*/
+
+/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)								*/
+#define bfin_read_PORTGIO()			bfin_read16(PORTGIO)
+#define bfin_write_PORTGIO(val)			bfin_write16(PORTGIO, val)
+#define bfin_read_PORTGIO_CLEAR()		bfin_read16(PORTGIO_CLEAR)
+#define bfin_write_PORTGIO_CLEAR(val)		bfin_write16(PORTGIO_CLEAR, val)
+#define bfin_read_PORTGIO_SET()			bfin_read16(PORTGIO_SET)
+#define bfin_write_PORTGIO_SET(val)		bfin_write16(PORTGIO_SET, val)
+#define bfin_read_PORTGIO_TOGGLE()		bfin_read16(PORTGIO_TOGGLE)
+#define bfin_write_PORTGIO_TOGGLE(val)		bfin_write16(PORTGIO_TOGGLE, val)
+#define bfin_read_PORTGIO_MASKA()		bfin_read16(PORTGIO_MASKA)
+#define bfin_write_PORTGIO_MASKA(val)		bfin_write16(PORTGIO_MASKA, val)
+#define bfin_read_PORTGIO_MASKA_CLEAR()		bfin_read16(PORTGIO_MASKA_CLEAR)
+#define bfin_write_PORTGIO_MASKA_CLEAR(val)	bfin_write16(PORTGIO_MASKA_CLEAR, val)
+#define bfin_read_PORTGIO_MASKA_SET()		bfin_read16(PORTGIO_MASKA_SET)
+#define bfin_write_PORTGIO_MASKA_SET(val)	bfin_write16(PORTGIO_MASKA_SET, val)
+#define bfin_read_PORTGIO_MASKA_TOGGLE()	bfin_read16(PORTGIO_MASKA_TOGGLE)
+#define bfin_write_PORTGIO_MASKA_TOGGLE(val)	bfin_write16(PORTGIO_MASKA_TOGGLE, val)
+#define bfin_read_PORTGIO_MASKB()		bfin_read16(PORTGIO_MASKB)
+#define bfin_write_PORTGIO_MASKB(val)		bfin_write16(PORTGIO_MASKB, val)
+#define bfin_read_PORTGIO_MASKB_CLEAR()		bfin_read16(PORTGIO_MASKB_CLEAR)
+#define bfin_write_PORTGIO_MASKB_CLEAR(val)	bfin_write16(PORTGIO_MASKB_CLEAR, val)
+#define bfin_read_PORTGIO_MASKB_SET()		bfin_read16(PORTGIO_MASKB_SET)
+#define bfin_write_PORTGIO_MASKB_SET(val)	bfin_write16(PORTGIO_MASKB_SET, val)
+#define bfin_read_PORTGIO_MASKB_TOGGLE()	bfin_read16(PORTGIO_MASKB_TOGGLE)
+#define bfin_write_PORTGIO_MASKB_TOGGLE(val)	bfin_write16(PORTGIO_MASKB_TOGGLE, val)
+#define bfin_read_PORTGIO_DIR()			bfin_read16(PORTGIO_DIR)
+#define bfin_write_PORTGIO_DIR(val)		bfin_write16(PORTGIO_DIR, val)
+#define bfin_read_PORTGIO_POLAR()		bfin_read16(PORTGIO_POLAR)
+#define bfin_write_PORTGIO_POLAR(val)		bfin_write16(PORTGIO_POLAR, val)
+#define bfin_read_PORTGIO_EDGE()		bfin_read16(PORTGIO_EDGE)
+#define bfin_write_PORTGIO_EDGE(val)		bfin_write16(PORTGIO_EDGE, val)
+#define bfin_read_PORTGIO_BOTH()		bfin_read16(PORTGIO_BOTH)
+#define bfin_write_PORTGIO_BOTH(val)		bfin_write16(PORTGIO_BOTH, val)
+#define bfin_read_PORTGIO_INEN()		bfin_read16(PORTGIO_INEN)
+#define bfin_write_PORTGIO_INEN(val)		bfin_write16(PORTGIO_INEN, val)
+
+
+/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF)								*/
+#define bfin_read_PORTHIO()			bfin_read16(PORTHIO)
+#define bfin_write_PORTHIO(val)			bfin_write16(PORTHIO, val)
+#define bfin_read_PORTHIO_CLEAR()		bfin_read16(PORTHIO_CLEAR)
+#define bfin_write_PORTHIO_CLEAR(val)		bfin_write16(PORTHIO_CLEAR, val)
+#define bfin_read_PORTHIO_SET()			bfin_read16(PORTHIO_SET)
+#define bfin_write_PORTHIO_SET(val)		bfin_write16(PORTHIO_SET, val)
+#define bfin_read_PORTHIO_TOGGLE()		bfin_read16(PORTHIO_TOGGLE)
+#define bfin_write_PORTHIO_TOGGLE(val)		bfin_write16(PORTHIO_TOGGLE, val)
+#define bfin_read_PORTHIO_MASKA()		bfin_read16(PORTHIO_MASKA)
+#define bfin_write_PORTHIO_MASKA(val)		bfin_write16(PORTHIO_MASKA, val)
+#define bfin_read_PORTHIO_MASKA_CLEAR()		bfin_read16(PORTHIO_MASKA_CLEAR)
+#define bfin_write_PORTHIO_MASKA_CLEAR(val)	bfin_write16(PORTHIO_MASKA_CLEAR, val)
+#define bfin_read_PORTHIO_MASKA_SET()		bfin_read16(PORTHIO_MASKA_SET)
+#define bfin_write_PORTHIO_MASKA_SET(val)	bfin_write16(PORTHIO_MASKA_SET, val)
+#define bfin_read_PORTHIO_MASKA_TOGGLE()	bfin_read16(PORTHIO_MASKA_TOGGLE)
+#define bfin_write_PORTHIO_MASKA_TOGGLE(val)	bfin_write16(PORTHIO_MASKA_TOGGLE, val)
+#define bfin_read_PORTHIO_MASKB()		bfin_read16(PORTHIO_MASKB)
+#define bfin_write_PORTHIO_MASKB(val)		bfin_write16(PORTHIO_MASKB, val)
+#define bfin_read_PORTHIO_MASKB_CLEAR()		bfin_read16(PORTHIO_MASKB_CLEAR)
+#define bfin_write_PORTHIO_MASKB_CLEAR(val)	bfin_write16(PORTHIO_MASKB_CLEAR, val)
+#define bfin_read_PORTHIO_MASKB_SET()		bfin_read16(PORTHIO_MASKB_SET)
+#define bfin_write_PORTHIO_MASKB_SET(val)	bfin_write16(PORTHIO_MASKB_SET, val)
+#define bfin_read_PORTHIO_MASKB_TOGGLE()	bfin_read16(PORTHIO_MASKB_TOGGLE)
+#define bfin_write_PORTHIO_MASKB_TOGGLE(val)	bfin_write16(PORTHIO_MASKB_TOGGLE, val)
+#define bfin_read_PORTHIO_DIR()			bfin_read16(PORTHIO_DIR)
+#define bfin_write_PORTHIO_DIR(val)		bfin_write16(PORTHIO_DIR, val)
+#define bfin_read_PORTHIO_POLAR()		bfin_read16(PORTHIO_POLAR)
+#define bfin_write_PORTHIO_POLAR(val)		bfin_write16(PORTHIO_POLAR, val)
+#define bfin_read_PORTHIO_EDGE()		bfin_read16(PORTHIO_EDGE)
+#define bfin_write_PORTHIO_EDGE(val)		bfin_write16(PORTHIO_EDGE, val)
+#define bfin_read_PORTHIO_BOTH()		bfin_read16(PORTHIO_BOTH)
+#define bfin_write_PORTHIO_BOTH(val)		bfin_write16(PORTHIO_BOTH, val)
+#define bfin_read_PORTHIO_INEN()		bfin_read16(PORTHIO_INEN)
+#define bfin_write_PORTHIO_INEN(val)		bfin_write16(PORTHIO_INEN, val)
+
+
+/* UART1 Controller		(0xFFC02000 - 0xFFC020FF)								*/
+#define bfin_read_UART1_THR()			bfin_read16(UART1_THR)
+#define bfin_write_UART1_THR(val)		bfin_write16(UART1_THR, val)
+#define bfin_read_UART1_RBR()			bfin_read16(UART1_RBR)
+#define bfin_write_UART1_RBR(val)		bfin_write16(UART1_RBR, val)
+#define bfin_read_UART1_DLL()			bfin_read16(UART1_DLL)
+#define bfin_write_UART1_DLL(val)		bfin_write16(UART1_DLL, val)
+#define bfin_read_UART1_IER()			bfin_read16(UART1_IER)
+#define bfin_write_UART1_IER(val)		bfin_write16(UART1_IER, val)
+#define bfin_read_UART1_DLH()			bfin_read16(UART1_DLH)
+#define bfin_write_UART1_DLH(val)		bfin_write16(UART1_DLH, val)
+#define bfin_read_UART1_IIR()			bfin_read16(UART1_IIR)
+#define bfin_write_UART1_IIR(val)		bfin_write16(UART1_IIR, val)
+#define bfin_read_UART1_LCR()			bfin_read16(UART1_LCR)
+#define bfin_write_UART1_LCR(val)		bfin_write16(UART1_LCR, val)
+#define bfin_read_UART1_MCR()			bfin_read16(UART1_MCR)
+#define bfin_write_UART1_MCR(val)		bfin_write16(UART1_MCR, val)
+#define bfin_read_UART1_LSR()			bfin_read16(UART1_LSR)
+#define bfin_write_UART1_LSR(val)		bfin_write16(UART1_LSR, val)
+#define bfin_read_UART1_MSR()			bfin_read16(UART1_MSR)
+#define bfin_write_UART1_MSR(val)		bfin_write16(UART1_MSR, val)
+#define bfin_read_UART1_SCR()			bfin_read16(UART1_SCR)
+#define bfin_write_UART1_SCR(val)		bfin_write16(UART1_SCR, val)
+#define bfin_read_UART1_GCTL()			bfin_read16(UART1_GCTL)
+#define bfin_write_UART1_GCTL(val)		bfin_write16(UART1_GCTL, val)
+
+/* Omit CAN register sets from the cdefBF534.h (CAN is not in the ADSP-BF52x processor) */
+
+/* Pin Control Registers	(0xFFC03200 - 0xFFC032FF)								*/
+#define bfin_read_PORTF_FER()			bfin_read16(PORTF_FER)
+#define bfin_write_PORTF_FER(val)		bfin_write16(PORTF_FER, val)
+#define bfin_read_PORTG_FER()			bfin_read16(PORTG_FER)
+#define bfin_write_PORTG_FER(val)		bfin_write16(PORTG_FER, val)
+#define bfin_read_PORTH_FER()			bfin_read16(PORTH_FER)
+#define bfin_write_PORTH_FER(val)		bfin_write16(PORTH_FER, val)
+#define bfin_read_PORT_MUX()			bfin_read16(PORT_MUX)
+#define bfin_write_PORT_MUX(val)		bfin_write16(PORT_MUX, val)
+
+
+/* Handshake MDMA Registers	(0xFFC03300 - 0xFFC033FF)								*/
+#define bfin_read_HMDMA0_CONTROL()		bfin_read16(HMDMA0_CONTROL)
+#define bfin_write_HMDMA0_CONTROL(val)		bfin_write16(HMDMA0_CONTROL, val)
+#define bfin_read_HMDMA0_ECINIT()		bfin_read16(HMDMA0_ECINIT)
+#define bfin_write_HMDMA0_ECINIT(val)		bfin_write16(HMDMA0_ECINIT, val)
+#define bfin_read_HMDMA0_BCINIT()		bfin_read16(HMDMA0_BCINIT)
+#define bfin_write_HMDMA0_BCINIT(val)		bfin_write16(HMDMA0_BCINIT, val)
+#define bfin_read_HMDMA0_ECURGENT()		bfin_read16(HMDMA0_ECURGENT)
+#define bfin_write_HMDMA0_ECURGENT(val)		bfin_write16(HMDMA0_ECURGENT, val)
+#define bfin_read_HMDMA0_ECOVERFLOW()		bfin_read16(HMDMA0_ECOVERFLOW)
+#define bfin_write_HMDMA0_ECOVERFLOW(val)	bfin_write16(HMDMA0_ECOVERFLOW, val)
+#define bfin_read_HMDMA0_ECOUNT()		bfin_read16(HMDMA0_ECOUNT)
+#define bfin_write_HMDMA0_ECOUNT(val)		bfin_write16(HMDMA0_ECOUNT, val)
+#define bfin_read_HMDMA0_BCOUNT()		bfin_read16(HMDMA0_BCOUNT)
+#define bfin_write_HMDMA0_BCOUNT(val)		bfin_write16(HMDMA0_BCOUNT, val)
+
+#define bfin_read_HMDMA1_CONTROL()		bfin_read16(HMDMA1_CONTROL)
+#define bfin_write_HMDMA1_CONTROL(val)		bfin_write16(HMDMA1_CONTROL, val)
+#define bfin_read_HMDMA1_ECINIT()		bfin_read16(HMDMA1_ECINIT)
+#define bfin_write_HMDMA1_ECINIT(val)		bfin_write16(HMDMA1_ECINIT, val)
+#define bfin_read_HMDMA1_BCINIT()		bfin_read16(HMDMA1_BCINIT)
+#define bfin_write_HMDMA1_BCINIT(val)		bfin_write16(HMDMA1_BCINIT, val)
+#define bfin_read_HMDMA1_ECURGENT()		bfin_read16(HMDMA1_ECURGENT)
+#define bfin_write_HMDMA1_ECURGENT(val)		bfin_write16(HMDMA1_ECURGENT, val)
+#define bfin_read_HMDMA1_ECOVERFLOW()		bfin_read16(HMDMA1_ECOVERFLOW)
+#define bfin_write_HMDMA1_ECOVERFLOW(val)	bfin_write16(HMDMA1_ECOVERFLOW, val)
+#define bfin_read_HMDMA1_ECOUNT()		bfin_read16(HMDMA1_ECOUNT)
+#define bfin_write_HMDMA1_ECOUNT(val)		bfin_write16(HMDMA1_ECOUNT, val)
+#define bfin_read_HMDMA1_BCOUNT()		bfin_read16(HMDMA1_BCOUNT)
+#define bfin_write_HMDMA1_BCOUNT(val)		bfin_write16(HMDMA1_BCOUNT, val)
+
+/* ==== end from cdefBF534.h ==== */
+
+/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
+
+#define bfin_read_PORTF_MUX()			bfin_read16(PORTF_MUX)
+#define bfin_write_PORTF_MUX(val)		bfin_write16(PORTF_MUX, val)
+#define bfin_read_PORTG_MUX()			bfin_read16(PORTG_MUX)
+#define bfin_write_PORTG_MUX(val)		bfin_write16(PORTG_MUX, val)
+#define bfin_read_PORTH_MUX()			bfin_read16(PORTH_MUX)
+#define bfin_write_PORTH_MUX(val)		bfin_write16(PORTH_MUX, val)
+
+#define bfin_read_PORTF_DRIVE()			bfin_read16(PORTF_DRIVE)
+#define bfin_write_PORTF_DRIVE(val)		bfin_write16(PORTF_DRIVE, val)
+#define bfin_read_PORTG_DRIVE()			bfin_read16(PORTG_DRIVE)
+#define bfin_write_PORTG_DRIVE(val)		bfin_write16(PORTG_DRIVE, val)
+#define bfin_read_PORTH_DRIVE()			bfin_read16(PORTH_DRIVE)
+#define bfin_write_PORTH_DRIVE(val)		bfin_write16(PORTH_DRIVE, val)
+#define bfin_read_PORTF_SLEW()			bfin_read16(PORTF_SLEW)
+#define bfin_write_PORTF_SLEW(val)		bfin_write16(PORTF_SLEW, val)
+#define bfin_read_PORTG_SLEW()			bfin_read16(PORTG_SLEW)
+#define bfin_write_PORTG_SLEW(val)		bfin_write16(PORTG_SLEW, val)
+#define bfin_read_PORTH_SLEW()			bfin_read16(PORTH_SLEW)
+#define bfin_write_PORTH_SLEW(val)		bfin_write16(PORTH_SLEW, val)
+#define bfin_read_PORTF_HYSTERESIS()		bfin_read16(PORTF_HYSTERESIS)
+#define bfin_write_PORTF_HYSTERESIS(val)	bfin_write16(PORTF_HYSTERESIS, val)
+#define bfin_read_PORTG_HYSTERESIS()		bfin_read16(PORTG_HYSTERESIS)
+#define bfin_write_PORTG_HYSTERESIS(val)	bfin_write16(PORTG_HYSTERESIS, val)
+#define bfin_read_PORTH_HYSTERESIS()		bfin_read16(PORTH_HYSTERESIS)
+#define bfin_write_PORTH_HYSTERESIS(val)	bfin_write16(PORTH_HYSTERESIS, val)
+#define bfin_read_MISCPORT_DRIVE()		bfin_read16(MISCPORT_DRIVE)
+#define bfin_write_MISCPORT_DRIVE(val)		bfin_write16(MISCPORT_DRIVE, val)
+#define bfin_read_MISCPORT_SLEW()		bfin_read16(MISCPORT_SLEW)
+#define bfin_write_MISCPORT_SLEW(val)		bfin_write16(MISCPORT_SLEW, val)
+#define bfin_read_MISCPORT_HYSTERESIS()		bfin_read16(MISCPORT_HYSTERESIS)
+#define bfin_write_MISCPORT_HYSTERESIS(val)	bfin_write16(MISCPORT_HYSTERESIS, val)
+
+/* HOST Port Registers */
+
+#define bfin_read_HOST_CONTROL()		bfin_read16(HOST_CONTROL)
+#define bfin_write_HOST_CONTROL(val)		bfin_write16(HOST_CONTROL, val)
+#define bfin_read_HOST_STATUS()			bfin_read16(HOST_STATUS)
+#define bfin_write_HOST_STATUS(val)		bfin_write16(HOST_STATUS, val)
+#define bfin_read_HOST_TIMEOUT()		bfin_read16(HOST_TIMEOUT)
+#define bfin_write_HOST_TIMEOUT(val)		bfin_write16(HOST_TIMEOUT, val)
+
+/* Counter Registers */
+
+#define bfin_read_CNT_CONFIG()			bfin_read16(CNT_CONFIG)
+#define bfin_write_CNT_CONFIG(val)		bfin_write16(CNT_CONFIG, val)
+#define bfin_read_CNT_IMASK()			bfin_read16(CNT_IMASK)
+#define bfin_write_CNT_IMASK(val)		bfin_write16(CNT_IMASK, val)
+#define bfin_read_CNT_STATUS()			bfin_read16(CNT_STATUS)
+#define bfin_write_CNT_STATUS(val)		bfin_write16(CNT_STATUS, val)
+#define bfin_read_CNT_COMMAND()			bfin_read16(CNT_COMMAND)
+#define bfin_write_CNT_COMMAND(val)		bfin_write16(CNT_COMMAND, val)
+#define bfin_read_CNT_DEBOUNCE()		bfin_read16(CNT_DEBOUNCE)
+#define bfin_write_CNT_DEBOUNCE(val)		bfin_write16(CNT_DEBOUNCE, val)
+#define bfin_read_CNT_COUNTER()			bfin_read32(CNT_COUNTER)
+#define bfin_write_CNT_COUNTER(val)		bfin_write32(CNT_COUNTER, val)
+#define bfin_read_CNT_MAX()			bfin_read32(CNT_MAX)
+#define bfin_write_CNT_MAX(val)			bfin_write32(CNT_MAX, val)
+#define bfin_read_CNT_MIN()			bfin_read32(CNT_MIN)
+#define bfin_write_CNT_MIN(val)			bfin_write32(CNT_MIN, val)
+
+/* Security Registers */
+
+#define bfin_read_SECURE_SYSSWT()		bfin_read32(SECURE_SYSSWT)
+#define bfin_write_SECURE_SYSSWT(val)		bfin_write32(SECURE_SYSSWT, val)
+#define bfin_read_SECURE_CONTROL()		bfin_read16(SECURE_CONTROL)
+#define bfin_write_SECURE_CONTROL(val)		bfin_write16(SECURE_CONTROL, val)
+#define bfin_read_SECURE_STATUS()		bfin_read16(SECURE_STATUS)
+#define bfin_write_SECURE_STATUS(val)		bfin_write16(SECURE_STATUS, val)
+
+/* NFC Registers */
+
+#define bfin_read_NFC_CTL()			bfin_read16(NFC_CTL)
+#define bfin_write_NFC_CTL(val)			bfin_write16(NFC_CTL, val)
+#define bfin_read_NFC_STAT()			bfin_read16(NFC_STAT)
+#define bfin_write_NFC_STAT(val)		bfin_write16(NFC_STAT, val)
+#define bfin_read_NFC_IRQSTAT()			bfin_read16(NFC_IRQSTAT)
+#define bfin_write_NFC_IRQSTAT(val)		bfin_write16(NFC_IRQSTAT, val)
+#define bfin_read_NFC_IRQMASK()			bfin_read16(NFC_IRQMASK)
+#define bfin_write_NFC_IRQMASK(val)		bfin_write16(NFC_IRQMASK, val)
+#define bfin_read_NFC_ECC0()			bfin_read16(NFC_ECC0)
+#define bfin_write_NFC_ECC0(val)		bfin_write16(NFC_ECC0, val)
+#define bfin_read_NFC_ECC1()			bfin_read16(NFC_ECC1)
+#define bfin_write_NFC_ECC1(val)		bfin_write16(NFC_ECC1, val)
+#define bfin_read_NFC_ECC2()			bfin_read16(NFC_ECC2)
+#define bfin_write_NFC_ECC2(val)		bfin_write16(NFC_ECC2, val)
+#define bfin_read_NFC_ECC3()			bfin_read16(NFC_ECC3)
+#define bfin_write_NFC_ECC3(val)		bfin_write16(NFC_ECC3, val)
+#define bfin_read_NFC_COUNT()			bfin_read16(NFC_COUNT)
+#define bfin_write_NFC_COUNT(val)		bfin_write16(NFC_COUNT, val)
+#define bfin_read_NFC_RST()			bfin_read16(NFC_RST)
+#define bfin_write_NFC_RST(val)			bfin_write16(NFC_RST, val)
+#define bfin_read_NFC_PGCTL()			bfin_read16(NFC_PGCTL)
+#define bfin_write_NFC_PGCTL(val)		bfin_write16(NFC_PGCTL, val)
+#define bfin_read_NFC_READ()			bfin_read16(NFC_READ)
+#define bfin_write_NFC_READ(val)		bfin_write16(NFC_READ, val)
+#define bfin_read_NFC_ADDR()			bfin_read16(NFC_ADDR)
+#define bfin_write_NFC_ADDR(val)		bfin_write16(NFC_ADDR, val)
+#define bfin_read_NFC_CMD()			bfin_read16(NFC_CMD)
+#define bfin_write_NFC_CMD(val)			bfin_write16(NFC_CMD, val)
+#define bfin_read_NFC_DATA_WR()			bfin_read16(NFC_DATA_WR)
+#define bfin_write_NFC_DATA_WR(val)		bfin_write16(NFC_DATA_WR, val)
+#define bfin_read_NFC_DATA_RD()			bfin_read16(NFC_DATA_RD)
+#define bfin_write_NFC_DATA_RD(val)		bfin_write16(NFC_DATA_RD, val)
+
+#endif /* _CDEF_BF522_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/cdefBF525.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
new file mode 100644
index 0000000..bd04531
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
@@ -0,0 +1,421 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _CDEF_BF525_H
+#define _CDEF_BF525_H
+
+/* BF525 is BF522 + USB */
+#include "cdefBF522.h"
+
+/* USB Control Registers */
+
+#define bfin_read_USB_FADDR()			bfin_read16(USB_FADDR)
+#define bfin_write_USB_FADDR(val)		bfin_write16(USB_FADDR, val)
+#define bfin_read_USB_POWER()			bfin_read16(USB_POWER)
+#define bfin_write_USB_POWER(val)		bfin_write16(USB_POWER, val)
+#define bfin_read_USB_INTRTX()			bfin_read16(USB_INTRTX)
+#define bfin_write_USB_INTRTX(val)		bfin_write16(USB_INTRTX, val)
+#define bfin_read_USB_INTRRX()			bfin_read16(USB_INTRRX)
+#define bfin_write_USB_INTRRX(val)		bfin_write16(USB_INTRRX, val)
+#define bfin_read_USB_INTRTXE()			bfin_read16(USB_INTRTXE)
+#define bfin_write_USB_INTRTXE(val)		bfin_write16(USB_INTRTXE, val)
+#define bfin_read_USB_INTRRXE()			bfin_read16(USB_INTRRXE)
+#define bfin_write_USB_INTRRXE(val)		bfin_write16(USB_INTRRXE, val)
+#define bfin_read_USB_INTRUSB()			bfin_read16(USB_INTRUSB)
+#define bfin_write_USB_INTRUSB(val)		bfin_write16(USB_INTRUSB, val)
+#define bfin_read_USB_INTRUSBE()		bfin_read16(USB_INTRUSBE)
+#define bfin_write_USB_INTRUSBE(val)		bfin_write16(USB_INTRUSBE, val)
+#define bfin_read_USB_FRAME()			bfin_read16(USB_FRAME)
+#define bfin_write_USB_FRAME(val)		bfin_write16(USB_FRAME, val)
+#define bfin_read_USB_INDEX()			bfin_read16(USB_INDEX)
+#define bfin_write_USB_INDEX(val)		bfin_write16(USB_INDEX, val)
+#define bfin_read_USB_TESTMODE()		bfin_read16(USB_TESTMODE)
+#define bfin_write_USB_TESTMODE(val)		bfin_write16(USB_TESTMODE, val)
+#define bfin_read_USB_GLOBINTR()		bfin_read16(USB_GLOBINTR)
+#define bfin_write_USB_GLOBINTR(val)		bfin_write16(USB_GLOBINTR, val)
+#define bfin_read_USB_GLOBAL_CTL()		bfin_read16(USB_GLOBAL_CTL)
+#define bfin_write_USB_GLOBAL_CTL(val)		bfin_write16(USB_GLOBAL_CTL, val)
+
+/* USB Packet Control Registers */
+
+#define bfin_read_USB_TX_MAX_PACKET()		bfin_read16(USB_TX_MAX_PACKET)
+#define bfin_write_USB_TX_MAX_PACKET(val)	bfin_write16(USB_TX_MAX_PACKET, val)
+#define bfin_read_USB_CSR0()			bfin_read16(USB_CSR0)
+#define bfin_write_USB_CSR0(val)		bfin_write16(USB_CSR0, val)
+#define bfin_read_USB_TXCSR()			bfin_read16(USB_TXCSR)
+#define bfin_write_USB_TXCSR(val)		bfin_write16(USB_TXCSR, val)
+#define bfin_read_USB_RX_MAX_PACKET()		bfin_read16(USB_RX_MAX_PACKET)
+#define bfin_write_USB_RX_MAX_PACKET(val)	bfin_write16(USB_RX_MAX_PACKET, val)
+#define bfin_read_USB_RXCSR()			bfin_read16(USB_RXCSR)
+#define bfin_write_USB_RXCSR(val)		bfin_write16(USB_RXCSR, val)
+#define bfin_read_USB_COUNT0()			bfin_read16(USB_COUNT0)
+#define bfin_write_USB_COUNT0(val)		bfin_write16(USB_COUNT0, val)
+#define bfin_read_USB_RXCOUNT()			bfin_read16(USB_RXCOUNT)
+#define bfin_write_USB_RXCOUNT(val)		bfin_write16(USB_RXCOUNT, val)
+#define bfin_read_USB_TXTYPE()			bfin_read16(USB_TXTYPE)
+#define bfin_write_USB_TXTYPE(val)		bfin_write16(USB_TXTYPE, val)
+#define bfin_read_USB_NAKLIMIT0()		bfin_read16(USB_NAKLIMIT0)
+#define bfin_write_USB_NAKLIMIT0(val)		bfin_write16(USB_NAKLIMIT0, val)
+#define bfin_read_USB_TXINTERVAL()		bfin_read16(USB_TXINTERVAL)
+#define bfin_write_USB_TXINTERVAL(val)		bfin_write16(USB_TXINTERVAL, val)
+#define bfin_read_USB_RXTYPE()			bfin_read16(USB_RXTYPE)
+#define bfin_write_USB_RXTYPE(val)		bfin_write16(USB_RXTYPE, val)
+#define bfin_read_USB_RXINTERVAL()		bfin_read16(USB_RXINTERVAL)
+#define bfin_write_USB_RXINTERVAL(val)		bfin_write16(USB_RXINTERVAL, val)
+#define bfin_read_USB_TXCOUNT()			bfin_read16(USB_TXCOUNT)
+#define bfin_write_USB_TXCOUNT(val)		bfin_write16(USB_TXCOUNT, val)
+
+/* USB Endpoint FIFO Registers */
+
+#define bfin_read_USB_EP0_FIFO()		bfin_read16(USB_EP0_FIFO)
+#define bfin_write_USB_EP0_FIFO(val)		bfin_write16(USB_EP0_FIFO, val)
+#define bfin_read_USB_EP1_FIFO()		bfin_read16(USB_EP1_FIFO)
+#define bfin_write_USB_EP1_FIFO(val)		bfin_write16(USB_EP1_FIFO, val)
+#define bfin_read_USB_EP2_FIFO()		bfin_read16(USB_EP2_FIFO)
+#define bfin_write_USB_EP2_FIFO(val)		bfin_write16(USB_EP2_FIFO, val)
+#define bfin_read_USB_EP3_FIFO()		bfin_read16(USB_EP3_FIFO)
+#define bfin_write_USB_EP3_FIFO(val)		bfin_write16(USB_EP3_FIFO, val)
+#define bfin_read_USB_EP4_FIFO()		bfin_read16(USB_EP4_FIFO)
+#define bfin_write_USB_EP4_FIFO(val)		bfin_write16(USB_EP4_FIFO, val)
+#define bfin_read_USB_EP5_FIFO()		bfin_read16(USB_EP5_FIFO)
+#define bfin_write_USB_EP5_FIFO(val)		bfin_write16(USB_EP5_FIFO, val)
+#define bfin_read_USB_EP6_FIFO()		bfin_read16(USB_EP6_FIFO)
+#define bfin_write_USB_EP6_FIFO(val)		bfin_write16(USB_EP6_FIFO, val)
+#define bfin_read_USB_EP7_FIFO()		bfin_read16(USB_EP7_FIFO)
+#define bfin_write_USB_EP7_FIFO(val)		bfin_write16(USB_EP7_FIFO, val)
+
+/* USB OTG Control Registers */
+
+#define bfin_read_USB_OTG_DEV_CTL()		bfin_read16(USB_OTG_DEV_CTL)
+#define bfin_write_USB_OTG_DEV_CTL(val)		bfin_write16(USB_OTG_DEV_CTL, val)
+#define bfin_read_USB_OTG_VBUS_IRQ()		bfin_read16(USB_OTG_VBUS_IRQ)
+#define bfin_write_USB_OTG_VBUS_IRQ(val)	bfin_write16(USB_OTG_VBUS_IRQ, val)
+#define bfin_read_USB_OTG_VBUS_MASK()		bfin_read16(USB_OTG_VBUS_MASK)
+#define bfin_write_USB_OTG_VBUS_MASK(val)	bfin_write16(USB_OTG_VBUS_MASK, val)
+
+/* USB Phy Control Registers */
+
+#define bfin_read_USB_LINKINFO()		bfin_read16(USB_LINKINFO)
+#define bfin_write_USB_LINKINFO(val)		bfin_write16(USB_LINKINFO, val)
+#define bfin_read_USB_VPLEN()			bfin_read16(USB_VPLEN)
+#define bfin_write_USB_VPLEN(val)		bfin_write16(USB_VPLEN, val)
+#define bfin_read_USB_HS_EOF1()			bfin_read16(USB_HS_EOF1)
+#define bfin_write_USB_HS_EOF1(val)		bfin_write16(USB_HS_EOF1, val)
+#define bfin_read_USB_FS_EOF1()			bfin_read16(USB_FS_EOF1)
+#define bfin_write_USB_FS_EOF1(val)		bfin_write16(USB_FS_EOF1, val)
+#define bfin_read_USB_LS_EOF1()			bfin_read16(USB_LS_EOF1)
+#define bfin_write_USB_LS_EOF1(val)		bfin_write16(USB_LS_EOF1, val)
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CNTRL()		bfin_read16(USB_APHY_CNTRL)
+#define bfin_write_USB_APHY_CNTRL(val)		bfin_write16(USB_APHY_CNTRL, val)
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CALIB()		bfin_read16(USB_APHY_CALIB)
+#define bfin_write_USB_APHY_CALIB(val)		bfin_write16(USB_APHY_CALIB, val)
+
+#define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
+#define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
+
+#define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
+#define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
+#define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)
+#define bfin_write_USB_SRP_CLKDIV(val)		bfin_write16(USB_SRP_CLKDIV, val)
+
+/* USB Endpoint 0 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXMAXP()		bfin_read16(USB_EP_NI0_TXMAXP)
+#define bfin_write_USB_EP_NI0_TXMAXP(val)	bfin_write16(USB_EP_NI0_TXMAXP, val)
+#define bfin_read_USB_EP_NI0_TXCSR()		bfin_read16(USB_EP_NI0_TXCSR)
+#define bfin_write_USB_EP_NI0_TXCSR(val)	bfin_write16(USB_EP_NI0_TXCSR, val)
+#define bfin_read_USB_EP_NI0_RXMAXP()		bfin_read16(USB_EP_NI0_RXMAXP)
+#define bfin_write_USB_EP_NI0_RXMAXP(val)	bfin_write16(USB_EP_NI0_RXMAXP, val)
+#define bfin_read_USB_EP_NI0_RXCSR()		bfin_read16(USB_EP_NI0_RXCSR)
+#define bfin_write_USB_EP_NI0_RXCSR(val)	bfin_write16(USB_EP_NI0_RXCSR, val)
+#define bfin_read_USB_EP_NI0_RXCOUNT()		bfin_read16(USB_EP_NI0_RXCOUNT)
+#define bfin_write_USB_EP_NI0_RXCOUNT(val)	bfin_write16(USB_EP_NI0_RXCOUNT, val)
+#define bfin_read_USB_EP_NI0_TXTYPE()		bfin_read16(USB_EP_NI0_TXTYPE)
+#define bfin_write_USB_EP_NI0_TXTYPE(val)	bfin_write16(USB_EP_NI0_TXTYPE, val)
+#define bfin_read_USB_EP_NI0_TXINTERVAL()	bfin_read16(USB_EP_NI0_TXINTERVAL)
+#define bfin_write_USB_EP_NI0_TXINTERVAL(val)	bfin_write16(USB_EP_NI0_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI0_RXTYPE()		bfin_read16(USB_EP_NI0_RXTYPE)
+#define bfin_write_USB_EP_NI0_RXTYPE(val)	bfin_write16(USB_EP_NI0_RXTYPE, val)
+#define bfin_read_USB_EP_NI0_RXINTERVAL()	bfin_read16(USB_EP_NI0_RXINTERVAL)
+#define bfin_write_USB_EP_NI0_RXINTERVAL(val)	bfin_write16(USB_EP_NI0_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI0_TXCOUNT()		bfin_read16(USB_EP_NI0_TXCOUNT)
+#define bfin_write_USB_EP_NI0_TXCOUNT(val)	bfin_write16(USB_EP_NI0_TXCOUNT, val)
+
+/* USB Endpoint 1 Control Registers */
+
+#define bfin_read_USB_EP_NI1_TXMAXP()		bfin_read16(USB_EP_NI1_TXMAXP)
+#define bfin_write_USB_EP_NI1_TXMAXP(val)	bfin_write16(USB_EP_NI1_TXMAXP, val)
+#define bfin_read_USB_EP_NI1_TXCSR()		bfin_read16(USB_EP_NI1_TXCSR)
+#define bfin_write_USB_EP_NI1_TXCSR(val)	bfin_write16(USB_EP_NI1_TXCSR, val)
+#define bfin_read_USB_EP_NI1_RXMAXP()		bfin_read16(USB_EP_NI1_RXMAXP)
+#define bfin_write_USB_EP_NI1_RXMAXP(val)	bfin_write16(USB_EP_NI1_RXMAXP, val)
+#define bfin_read_USB_EP_NI1_RXCSR()		bfin_read16(USB_EP_NI1_RXCSR)
+#define bfin_write_USB_EP_NI1_RXCSR(val)	bfin_write16(USB_EP_NI1_RXCSR, val)
+#define bfin_read_USB_EP_NI1_RXCOUNT()		bfin_read16(USB_EP_NI1_RXCOUNT)
+#define bfin_write_USB_EP_NI1_RXCOUNT(val)	bfin_write16(USB_EP_NI1_RXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXTYPE()		bfin_read16(USB_EP_NI1_TXTYPE)
+#define bfin_write_USB_EP_NI1_TXTYPE(val)	bfin_write16(USB_EP_NI1_TXTYPE, val)
+#define bfin_read_USB_EP_NI1_TXINTERVAL()	bfin_read16(USB_EP_NI1_TXINTERVAL)
+#define bfin_write_USB_EP_NI1_TXINTERVAL(val)	bfin_write16(USB_EP_NI1_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI1_RXTYPE()		bfin_read16(USB_EP_NI1_RXTYPE)
+#define bfin_write_USB_EP_NI1_RXTYPE(val)	bfin_write16(USB_EP_NI1_RXTYPE, val)
+#define bfin_read_USB_EP_NI1_RXINTERVAL()	bfin_read16(USB_EP_NI1_RXINTERVAL)
+#define bfin_write_USB_EP_NI1_RXINTERVAL(val)	bfin_write16(USB_EP_NI1_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI1_TXCOUNT()		bfin_read16(USB_EP_NI1_TXCOUNT)
+#define bfin_write_USB_EP_NI1_TXCOUNT(val)	bfin_write16(USB_EP_NI1_TXCOUNT, val)
+
+/* USB Endpoint 2 Control Registers */
+
+#define bfin_read_USB_EP_NI2_TXMAXP()		bfin_read16(USB_EP_NI2_TXMAXP)
+#define bfin_write_USB_EP_NI2_TXMAXP(val)	bfin_write16(USB_EP_NI2_TXMAXP, val)
+#define bfin_read_USB_EP_NI2_TXCSR()		bfin_read16(USB_EP_NI2_TXCSR)
+#define bfin_write_USB_EP_NI2_TXCSR(val)	bfin_write16(USB_EP_NI2_TXCSR, val)
+#define bfin_read_USB_EP_NI2_RXMAXP()		bfin_read16(USB_EP_NI2_RXMAXP)
+#define bfin_write_USB_EP_NI2_RXMAXP(val)	bfin_write16(USB_EP_NI2_RXMAXP, val)
+#define bfin_read_USB_EP_NI2_RXCSR()		bfin_read16(USB_EP_NI2_RXCSR)
+#define bfin_write_USB_EP_NI2_RXCSR(val)	bfin_write16(USB_EP_NI2_RXCSR, val)
+#define bfin_read_USB_EP_NI2_RXCOUNT()		bfin_read16(USB_EP_NI2_RXCOUNT)
+#define bfin_write_USB_EP_NI2_RXCOUNT(val)	bfin_write16(USB_EP_NI2_RXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXTYPE()		bfin_read16(USB_EP_NI2_TXTYPE)
+#define bfin_write_USB_EP_NI2_TXTYPE(val)	bfin_write16(USB_EP_NI2_TXTYPE, val)
+#define bfin_read_USB_EP_NI2_TXINTERVAL()	bfin_read16(USB_EP_NI2_TXINTERVAL)
+#define bfin_write_USB_EP_NI2_TXINTERVAL(val)	bfin_write16(USB_EP_NI2_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI2_RXTYPE()		bfin_read16(USB_EP_NI2_RXTYPE)
+#define bfin_write_USB_EP_NI2_RXTYPE(val)	bfin_write16(USB_EP_NI2_RXTYPE, val)
+#define bfin_read_USB_EP_NI2_RXINTERVAL()	bfin_read16(USB_EP_NI2_RXINTERVAL)
+#define bfin_write_USB_EP_NI2_RXINTERVAL(val)	bfin_write16(USB_EP_NI2_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI2_TXCOUNT()		bfin_read16(USB_EP_NI2_TXCOUNT)
+#define bfin_write_USB_EP_NI2_TXCOUNT(val)	bfin_write16(USB_EP_NI2_TXCOUNT, val)
+
+/* USB Endpoint 3 Control Registers */
+
+#define bfin_read_USB_EP_NI3_TXMAXP()		bfin_read16(USB_EP_NI3_TXMAXP)
+#define bfin_write_USB_EP_NI3_TXMAXP(val)	bfin_write16(USB_EP_NI3_TXMAXP, val)
+#define bfin_read_USB_EP_NI3_TXCSR()		bfin_read16(USB_EP_NI3_TXCSR)
+#define bfin_write_USB_EP_NI3_TXCSR(val)	bfin_write16(USB_EP_NI3_TXCSR, val)
+#define bfin_read_USB_EP_NI3_RXMAXP()		bfin_read16(USB_EP_NI3_RXMAXP)
+#define bfin_write_USB_EP_NI3_RXMAXP(val)	bfin_write16(USB_EP_NI3_RXMAXP, val)
+#define bfin_read_USB_EP_NI3_RXCSR()		bfin_read16(USB_EP_NI3_RXCSR)
+#define bfin_write_USB_EP_NI3_RXCSR(val)	bfin_write16(USB_EP_NI3_RXCSR, val)
+#define bfin_read_USB_EP_NI3_RXCOUNT()		bfin_read16(USB_EP_NI3_RXCOUNT)
+#define bfin_write_USB_EP_NI3_RXCOUNT(val)	bfin_write16(USB_EP_NI3_RXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXTYPE()		bfin_read16(USB_EP_NI3_TXTYPE)
+#define bfin_write_USB_EP_NI3_TXTYPE(val)	bfin_write16(USB_EP_NI3_TXTYPE, val)
+#define bfin_read_USB_EP_NI3_TXINTERVAL()	bfin_read16(USB_EP_NI3_TXINTERVAL)
+#define bfin_write_USB_EP_NI3_TXINTERVAL(val)	bfin_write16(USB_EP_NI3_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI3_RXTYPE()		bfin_read16(USB_EP_NI3_RXTYPE)
+#define bfin_write_USB_EP_NI3_RXTYPE(val)	bfin_write16(USB_EP_NI3_RXTYPE, val)
+#define bfin_read_USB_EP_NI3_RXINTERVAL()	bfin_read16(USB_EP_NI3_RXINTERVAL)
+#define bfin_write_USB_EP_NI3_RXINTERVAL(val)	bfin_write16(USB_EP_NI3_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI3_TXCOUNT()		bfin_read16(USB_EP_NI3_TXCOUNT)
+#define bfin_write_USB_EP_NI3_TXCOUNT(val)	bfin_write16(USB_EP_NI3_TXCOUNT, val)
+
+/* USB Endpoint 4 Control Registers */
+
+#define bfin_read_USB_EP_NI4_TXMAXP()		bfin_read16(USB_EP_NI4_TXMAXP)
+#define bfin_write_USB_EP_NI4_TXMAXP(val)	bfin_write16(USB_EP_NI4_TXMAXP, val)
+#define bfin_read_USB_EP_NI4_TXCSR()		bfin_read16(USB_EP_NI4_TXCSR)
+#define bfin_write_USB_EP_NI4_TXCSR(val)	bfin_write16(USB_EP_NI4_TXCSR, val)
+#define bfin_read_USB_EP_NI4_RXMAXP()		bfin_read16(USB_EP_NI4_RXMAXP)
+#define bfin_write_USB_EP_NI4_RXMAXP(val)	bfin_write16(USB_EP_NI4_RXMAXP, val)
+#define bfin_read_USB_EP_NI4_RXCSR()		bfin_read16(USB_EP_NI4_RXCSR)
+#define bfin_write_USB_EP_NI4_RXCSR(val)	bfin_write16(USB_EP_NI4_RXCSR, val)
+#define bfin_read_USB_EP_NI4_RXCOUNT()		bfin_read16(USB_EP_NI4_RXCOUNT)
+#define bfin_write_USB_EP_NI4_RXCOUNT(val)	bfin_write16(USB_EP_NI4_RXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXTYPE()		bfin_read16(USB_EP_NI4_TXTYPE)
+#define bfin_write_USB_EP_NI4_TXTYPE(val)	bfin_write16(USB_EP_NI4_TXTYPE, val)
+#define bfin_read_USB_EP_NI4_TXINTERVAL()	bfin_read16(USB_EP_NI4_TXINTERVAL)
+#define bfin_write_USB_EP_NI4_TXINTERVAL(val)	bfin_write16(USB_EP_NI4_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI4_RXTYPE()		bfin_read16(USB_EP_NI4_RXTYPE)
+#define bfin_write_USB_EP_NI4_RXTYPE(val)	bfin_write16(USB_EP_NI4_RXTYPE, val)
+#define bfin_read_USB_EP_NI4_RXINTERVAL()	bfin_read16(USB_EP_NI4_RXINTERVAL)
+#define bfin_write_USB_EP_NI4_RXINTERVAL(val)	bfin_write16(USB_EP_NI4_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI4_TXCOUNT()		bfin_read16(USB_EP_NI4_TXCOUNT)
+#define bfin_write_USB_EP_NI4_TXCOUNT(val)	bfin_write16(USB_EP_NI4_TXCOUNT, val)
+
+/* USB Endpoint 5 Control Registers */
+
+#define bfin_read_USB_EP_NI5_TXMAXP()		bfin_read16(USB_EP_NI5_TXMAXP)
+#define bfin_write_USB_EP_NI5_TXMAXP(val)	bfin_write16(USB_EP_NI5_TXMAXP, val)
+#define bfin_read_USB_EP_NI5_TXCSR()		bfin_read16(USB_EP_NI5_TXCSR)
+#define bfin_write_USB_EP_NI5_TXCSR(val)	bfin_write16(USB_EP_NI5_TXCSR, val)
+#define bfin_read_USB_EP_NI5_RXMAXP()		bfin_read16(USB_EP_NI5_RXMAXP)
+#define bfin_write_USB_EP_NI5_RXMAXP(val)	bfin_write16(USB_EP_NI5_RXMAXP, val)
+#define bfin_read_USB_EP_NI5_RXCSR()		bfin_read16(USB_EP_NI5_RXCSR)
+#define bfin_write_USB_EP_NI5_RXCSR(val)	bfin_write16(USB_EP_NI5_RXCSR, val)
+#define bfin_read_USB_EP_NI5_RXCOUNT()		bfin_read16(USB_EP_NI5_RXCOUNT)
+#define bfin_write_USB_EP_NI5_RXCOUNT(val)	bfin_write16(USB_EP_NI5_RXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXTYPE()		bfin_read16(USB_EP_NI5_TXTYPE)
+#define bfin_write_USB_EP_NI5_TXTYPE(val)	bfin_write16(USB_EP_NI5_TXTYPE, val)
+#define bfin_read_USB_EP_NI5_TXINTERVAL()	bfin_read16(USB_EP_NI5_TXINTERVAL)
+#define bfin_write_USB_EP_NI5_TXINTERVAL(val)	bfin_write16(USB_EP_NI5_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI5_RXTYPE()		bfin_read16(USB_EP_NI5_RXTYPE)
+#define bfin_write_USB_EP_NI5_RXTYPE(val)	bfin_write16(USB_EP_NI5_RXTYPE, val)
+#define bfin_read_USB_EP_NI5_RXINTERVAL()	bfin_read16(USB_EP_NI5_RXINTERVAL)
+#define bfin_write_USB_EP_NI5_RXINTERVAL(val)	bfin_write16(USB_EP_NI5_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI5_TXCOUNT()		bfin_read16(USB_EP_NI5_TXCOUNT)
+#define bfin_write_USB_EP_NI5_TXCOUNT(val)	bfin_write16(USB_EP_NI5_TXCOUNT, val)
+
+/* USB Endpoint 6 Control Registers */
+
+#define bfin_read_USB_EP_NI6_TXMAXP()		bfin_read16(USB_EP_NI6_TXMAXP)
+#define bfin_write_USB_EP_NI6_TXMAXP(val)	bfin_write16(USB_EP_NI6_TXMAXP, val)
+#define bfin_read_USB_EP_NI6_TXCSR()		bfin_read16(USB_EP_NI6_TXCSR)
+#define bfin_write_USB_EP_NI6_TXCSR(val)	bfin_write16(USB_EP_NI6_TXCSR, val)
+#define bfin_read_USB_EP_NI6_RXMAXP()		bfin_read16(USB_EP_NI6_RXMAXP)
+#define bfin_write_USB_EP_NI6_RXMAXP(val)	bfin_write16(USB_EP_NI6_RXMAXP, val)
+#define bfin_read_USB_EP_NI6_RXCSR()		bfin_read16(USB_EP_NI6_RXCSR)
+#define bfin_write_USB_EP_NI6_RXCSR(val)	bfin_write16(USB_EP_NI6_RXCSR, val)
+#define bfin_read_USB_EP_NI6_RXCOUNT()		bfin_read16(USB_EP_NI6_RXCOUNT)
+#define bfin_write_USB_EP_NI6_RXCOUNT(val)	bfin_write16(USB_EP_NI6_RXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXTYPE()		bfin_read16(USB_EP_NI6_TXTYPE)
+#define bfin_write_USB_EP_NI6_TXTYPE(val)	bfin_write16(USB_EP_NI6_TXTYPE, val)
+#define bfin_read_USB_EP_NI6_TXINTERVAL()	bfin_read16(USB_EP_NI6_TXINTERVAL)
+#define bfin_write_USB_EP_NI6_TXINTERVAL(val)	bfin_write16(USB_EP_NI6_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI6_RXTYPE()		bfin_read16(USB_EP_NI6_RXTYPE)
+#define bfin_write_USB_EP_NI6_RXTYPE(val)	bfin_write16(USB_EP_NI6_RXTYPE, val)
+#define bfin_read_USB_EP_NI6_RXINTERVAL()	bfin_read16(USB_EP_NI6_RXINTERVAL)
+#define bfin_write_USB_EP_NI6_RXINTERVAL(val)	bfin_write16(USB_EP_NI6_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI6_TXCOUNT()		bfin_read16(USB_EP_NI6_TXCOUNT)
+#define bfin_write_USB_EP_NI6_TXCOUNT(val)	bfin_write16(USB_EP_NI6_TXCOUNT, val)
+
+/* USB Endpoint 7 Control Registers */
+
+#define bfin_read_USB_EP_NI7_TXMAXP()		bfin_read16(USB_EP_NI7_TXMAXP)
+#define bfin_write_USB_EP_NI7_TXMAXP(val)	bfin_write16(USB_EP_NI7_TXMAXP, val)
+#define bfin_read_USB_EP_NI7_TXCSR()		bfin_read16(USB_EP_NI7_TXCSR)
+#define bfin_write_USB_EP_NI7_TXCSR(val)	bfin_write16(USB_EP_NI7_TXCSR, val)
+#define bfin_read_USB_EP_NI7_RXMAXP()		bfin_read16(USB_EP_NI7_RXMAXP)
+#define bfin_write_USB_EP_NI7_RXMAXP(val)	bfin_write16(USB_EP_NI7_RXMAXP, val)
+#define bfin_read_USB_EP_NI7_RXCSR()		bfin_read16(USB_EP_NI7_RXCSR)
+#define bfin_write_USB_EP_NI7_RXCSR(val)	bfin_write16(USB_EP_NI7_RXCSR, val)
+#define bfin_read_USB_EP_NI7_RXCOUNT()		bfin_read16(USB_EP_NI7_RXCOUNT)
+#define bfin_write_USB_EP_NI7_RXCOUNT(val)	bfin_write16(USB_EP_NI7_RXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXTYPE()		bfin_read16(USB_EP_NI7_TXTYPE)
+#define bfin_write_USB_EP_NI7_TXTYPE(val)	bfin_write16(USB_EP_NI7_TXTYPE, val)
+#define bfin_read_USB_EP_NI7_TXINTERVAL()	bfin_read16(USB_EP_NI7_TXINTERVAL)
+#define bfin_write_USB_EP_NI7_TXINTERVAL(val)	bfin_write16(USB_EP_NI7_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_RXTYPE()		bfin_read16(USB_EP_NI7_RXTYPE)
+#define bfin_write_USB_EP_NI7_RXTYPE(val)	bfin_write16(USB_EP_NI7_RXTYPE, val)
+#define bfin_read_USB_EP_NI7_RXINTERVAL()	bfin_read16(USB_EP_NI7_RXINTERVAL)
+#define bfin_write_USB_EP_NI7_RXINTERVAL(val)	bfin_write16(USB_EP_NI7_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_TXCOUNT()		bfin_read16(USB_EP_NI7_TXCOUNT)
+#define bfin_write_USB_EP_NI7_TXCOUNT(val)	bfin_write16(USB_EP_NI7_TXCOUNT, val)
+
+#define bfin_read_USB_DMA_INTERRUPT()		bfin_read16(USB_DMA_INTERRUPT)
+#define bfin_write_USB_DMA_INTERRUPT(val)	bfin_write16(USB_DMA_INTERRUPT, val)
+
+/* USB Channel 0 Config Registers */
+
+#define bfin_read_USB_DMA0CONTROL()		bfin_read16(USB_DMA0CONTROL)
+#define bfin_write_USB_DMA0CONTROL(val)		bfin_write16(USB_DMA0CONTROL, val)
+#define bfin_read_USB_DMA0ADDRLOW()		bfin_read16(USB_DMA0ADDRLOW)
+#define bfin_write_USB_DMA0ADDRLOW(val)		bfin_write16(USB_DMA0ADDRLOW, val)
+#define bfin_read_USB_DMA0ADDRHIGH()		bfin_read16(USB_DMA0ADDRHIGH)
+#define bfin_write_USB_DMA0ADDRHIGH(val)	bfin_write16(USB_DMA0ADDRHIGH, val)
+#define bfin_read_USB_DMA0COUNTLOW()		bfin_read16(USB_DMA0COUNTLOW)
+#define bfin_write_USB_DMA0COUNTLOW(val)	bfin_write16(USB_DMA0COUNTLOW, val)
+#define bfin_read_USB_DMA0COUNTHIGH()		bfin_read16(USB_DMA0COUNTHIGH)
+#define bfin_write_USB_DMA0COUNTHIGH(val)	bfin_write16(USB_DMA0COUNTHIGH, val)
+
+/* USB Channel 1 Config Registers */
+
+#define bfin_read_USB_DMA1CONTROL()		bfin_read16(USB_DMA1CONTROL)
+#define bfin_write_USB_DMA1CONTROL(val)		bfin_write16(USB_DMA1CONTROL, val)
+#define bfin_read_USB_DMA1ADDRLOW()		bfin_read16(USB_DMA1ADDRLOW)
+#define bfin_write_USB_DMA1ADDRLOW(val)		bfin_write16(USB_DMA1ADDRLOW, val)
+#define bfin_read_USB_DMA1ADDRHIGH()		bfin_read16(USB_DMA1ADDRHIGH)
+#define bfin_write_USB_DMA1ADDRHIGH(val)	bfin_write16(USB_DMA1ADDRHIGH, val)
+#define bfin_read_USB_DMA1COUNTLOW()		bfin_read16(USB_DMA1COUNTLOW)
+#define bfin_write_USB_DMA1COUNTLOW(val)	bfin_write16(USB_DMA1COUNTLOW, val)
+#define bfin_read_USB_DMA1COUNTHIGH()		bfin_read16(USB_DMA1COUNTHIGH)
+#define bfin_write_USB_DMA1COUNTHIGH(val)	bfin_write16(USB_DMA1COUNTHIGH, val)
+
+/* USB Channel 2 Config Registers */
+
+#define bfin_read_USB_DMA2CONTROL()		bfin_read16(USB_DMA2CONTROL)
+#define bfin_write_USB_DMA2CONTROL(val)		bfin_write16(USB_DMA2CONTROL, val)
+#define bfin_read_USB_DMA2ADDRLOW()		bfin_read16(USB_DMA2ADDRLOW)
+#define bfin_write_USB_DMA2ADDRLOW(val)		bfin_write16(USB_DMA2ADDRLOW, val)
+#define bfin_read_USB_DMA2ADDRHIGH()		bfin_read16(USB_DMA2ADDRHIGH)
+#define bfin_write_USB_DMA2ADDRHIGH(val)	bfin_write16(USB_DMA2ADDRHIGH, val)
+#define bfin_read_USB_DMA2COUNTLOW()		bfin_read16(USB_DMA2COUNTLOW)
+#define bfin_write_USB_DMA2COUNTLOW(val)	bfin_write16(USB_DMA2COUNTLOW, val)
+#define bfin_read_USB_DMA2COUNTHIGH()		bfin_read16(USB_DMA2COUNTHIGH)
+#define bfin_write_USB_DMA2COUNTHIGH(val)	bfin_write16(USB_DMA2COUNTHIGH, val)
+
+/* USB Channel 3 Config Registers */
+
+#define bfin_read_USB_DMA3CONTROL()		bfin_read16(USB_DMA3CONTROL)
+#define bfin_write_USB_DMA3CONTROL(val)		bfin_write16(USB_DMA3CONTROL, val)
+#define bfin_read_USB_DMA3ADDRLOW()		bfin_read16(USB_DMA3ADDRLOW)
+#define bfin_write_USB_DMA3ADDRLOW(val)		bfin_write16(USB_DMA3ADDRLOW, val)
+#define bfin_read_USB_DMA3ADDRHIGH()		bfin_read16(USB_DMA3ADDRHIGH)
+#define bfin_write_USB_DMA3ADDRHIGH(val)	bfin_write16(USB_DMA3ADDRHIGH, val)
+#define bfin_read_USB_DMA3COUNTLOW()		bfin_read16(USB_DMA3COUNTLOW)
+#define bfin_write_USB_DMA3COUNTLOW(val)	bfin_write16(USB_DMA3COUNTLOW, val)
+#define bfin_read_USB_DMA3COUNTHIGH()		bfin_read16(USB_DMA3COUNTHIGH)
+#define bfin_write_USB_DMA3COUNTHIGH(val)	bfin_write16(USB_DMA3COUNTHIGH, val)
+
+/* USB Channel 4 Config Registers */
+
+#define bfin_read_USB_DMA4CONTROL()		bfin_read16(USB_DMA4CONTROL)
+#define bfin_write_USB_DMA4CONTROL(val)		bfin_write16(USB_DMA4CONTROL, val)
+#define bfin_read_USB_DMA4ADDRLOW()		bfin_read16(USB_DMA4ADDRLOW)
+#define bfin_write_USB_DMA4ADDRLOW(val)		bfin_write16(USB_DMA4ADDRLOW, val)
+#define bfin_read_USB_DMA4ADDRHIGH()		bfin_read16(USB_DMA4ADDRHIGH)
+#define bfin_write_USB_DMA4ADDRHIGH(val)	bfin_write16(USB_DMA4ADDRHIGH, val)
+#define bfin_read_USB_DMA4COUNTLOW()		bfin_read16(USB_DMA4COUNTLOW)
+#define bfin_write_USB_DMA4COUNTLOW(val)	bfin_write16(USB_DMA4COUNTLOW, val)
+#define bfin_read_USB_DMA4COUNTHIGH()		bfin_read16(USB_DMA4COUNTHIGH)
+#define bfin_write_USB_DMA4COUNTHIGH(val)	bfin_write16(USB_DMA4COUNTHIGH, val)
+
+/* USB Channel 5 Config Registers */
+
+#define bfin_read_USB_DMA5CONTROL()		bfin_read16(USB_DMA5CONTROL)
+#define bfin_write_USB_DMA5CONTROL(val)		bfin_write16(USB_DMA5CONTROL, val)
+#define bfin_read_USB_DMA5ADDRLOW()		bfin_read16(USB_DMA5ADDRLOW)
+#define bfin_write_USB_DMA5ADDRLOW(val)		bfin_write16(USB_DMA5ADDRLOW, val)
+#define bfin_read_USB_DMA5ADDRHIGH()		bfin_read16(USB_DMA5ADDRHIGH)
+#define bfin_write_USB_DMA5ADDRHIGH(val)	bfin_write16(USB_DMA5ADDRHIGH, val)
+#define bfin_read_USB_DMA5COUNTLOW()		bfin_read16(USB_DMA5COUNTLOW)
+#define bfin_write_USB_DMA5COUNTLOW(val)	bfin_write16(USB_DMA5COUNTLOW, val)
+#define bfin_read_USB_DMA5COUNTHIGH()		bfin_read16(USB_DMA5COUNTHIGH)
+#define bfin_write_USB_DMA5COUNTHIGH(val)	bfin_write16(USB_DMA5COUNTHIGH, val)
+
+/* USB Channel 6 Config Registers */
+
+#define bfin_read_USB_DMA6CONTROL()		bfin_read16(USB_DMA6CONTROL)
+#define bfin_write_USB_DMA6CONTROL(val)		bfin_write16(USB_DMA6CONTROL, val)
+#define bfin_read_USB_DMA6ADDRLOW()		bfin_read16(USB_DMA6ADDRLOW)
+#define bfin_write_USB_DMA6ADDRLOW(val)		bfin_write16(USB_DMA6ADDRLOW, val)
+#define bfin_read_USB_DMA6ADDRHIGH()		bfin_read16(USB_DMA6ADDRHIGH)
+#define bfin_write_USB_DMA6ADDRHIGH(val)	bfin_write16(USB_DMA6ADDRHIGH, val)
+#define bfin_read_USB_DMA6COUNTLOW()		bfin_read16(USB_DMA6COUNTLOW)
+#define bfin_write_USB_DMA6COUNTLOW(val)	bfin_write16(USB_DMA6COUNTLOW, val)
+#define bfin_read_USB_DMA6COUNTHIGH()		bfin_read16(USB_DMA6COUNTHIGH)
+#define bfin_write_USB_DMA6COUNTHIGH(val)	bfin_write16(USB_DMA6COUNTHIGH, val)
+
+/* USB Channel 7 Config Registers */
+
+#define bfin_read_USB_DMA7CONTROL()		bfin_read16(USB_DMA7CONTROL)
+#define bfin_write_USB_DMA7CONTROL(val)		bfin_write16(USB_DMA7CONTROL, val)
+#define bfin_read_USB_DMA7ADDRLOW()		bfin_read16(USB_DMA7ADDRLOW)
+#define bfin_write_USB_DMA7ADDRLOW(val)		bfin_write16(USB_DMA7ADDRLOW, val)
+#define bfin_read_USB_DMA7ADDRHIGH()		bfin_read16(USB_DMA7ADDRHIGH)
+#define bfin_write_USB_DMA7ADDRHIGH(val)	bfin_write16(USB_DMA7ADDRHIGH, val)
+#define bfin_read_USB_DMA7COUNTLOW()		bfin_read16(USB_DMA7COUNTLOW)
+#define bfin_write_USB_DMA7COUNTLOW(val)	bfin_write16(USB_DMA7COUNTLOW, val)
+#define bfin_read_USB_DMA7COUNTHIGH()		bfin_read16(USB_DMA7COUNTHIGH)
+#define bfin_write_USB_DMA7COUNTHIGH(val)	bfin_write16(USB_DMA7COUNTHIGH, val)
+
+#endif /* _CDEF_BF525_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/cdefBF527.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
new file mode 100644
index 0000000..eb22f58
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _CDEF_BF527_H
+#define _CDEF_BF527_H
+
+/* BF527 is BF525 + EMAC */
+#include "cdefBF525.h"
+
+/* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF) */
+
+#define bfin_read_EMAC_OPMODE()			bfin_read32(EMAC_OPMODE)
+#define bfin_write_EMAC_OPMODE(val)		bfin_write32(EMAC_OPMODE, val)
+#define bfin_read_EMAC_ADDRLO()			bfin_read32(EMAC_ADDRLO)
+#define bfin_write_EMAC_ADDRLO(val)		bfin_write32(EMAC_ADDRLO, val)
+#define bfin_read_EMAC_ADDRHI()			bfin_read32(EMAC_ADDRHI)
+#define bfin_write_EMAC_ADDRHI(val)		bfin_write32(EMAC_ADDRHI, val)
+#define bfin_read_EMAC_HASHLO()			bfin_read32(EMAC_HASHLO)
+#define bfin_write_EMAC_HASHLO(val)		bfin_write32(EMAC_HASHLO, val)
+#define bfin_read_EMAC_HASHHI()			bfin_read32(EMAC_HASHHI)
+#define bfin_write_EMAC_HASHHI(val)		bfin_write32(EMAC_HASHHI, val)
+#define bfin_read_EMAC_STAADD()			bfin_read32(EMAC_STAADD)
+#define bfin_write_EMAC_STAADD(val)		bfin_write32(EMAC_STAADD, val)
+#define bfin_read_EMAC_STADAT()			bfin_read32(EMAC_STADAT)
+#define bfin_write_EMAC_STADAT(val)		bfin_write32(EMAC_STADAT, val)
+#define bfin_read_EMAC_FLC()			bfin_read32(EMAC_FLC)
+#define bfin_write_EMAC_FLC(val)		bfin_write32(EMAC_FLC, val)
+#define bfin_read_EMAC_VLAN1()			bfin_read32(EMAC_VLAN1)
+#define bfin_write_EMAC_VLAN1(val)		bfin_write32(EMAC_VLAN1, val)
+#define bfin_read_EMAC_VLAN2()			bfin_read32(EMAC_VLAN2)
+#define bfin_write_EMAC_VLAN2(val)		bfin_write32(EMAC_VLAN2, val)
+#define bfin_read_EMAC_WKUP_CTL()		bfin_read32(EMAC_WKUP_CTL)
+#define bfin_write_EMAC_WKUP_CTL(val)		bfin_write32(EMAC_WKUP_CTL, val)
+#define bfin_read_EMAC_WKUP_FFMSK0()		bfin_read32(EMAC_WKUP_FFMSK0)
+#define bfin_write_EMAC_WKUP_FFMSK0(val)	bfin_write32(EMAC_WKUP_FFMSK0, val)
+#define bfin_read_EMAC_WKUP_FFMSK1()		bfin_read32(EMAC_WKUP_FFMSK1)
+#define bfin_write_EMAC_WKUP_FFMSK1(val)	bfin_write32(EMAC_WKUP_FFMSK1, val)
+#define bfin_read_EMAC_WKUP_FFMSK2()		bfin_read32(EMAC_WKUP_FFMSK2)
+#define bfin_write_EMAC_WKUP_FFMSK2(val)	bfin_write32(EMAC_WKUP_FFMSK2, val)
+#define bfin_read_EMAC_WKUP_FFMSK3()		bfin_read32(EMAC_WKUP_FFMSK3)
+#define bfin_write_EMAC_WKUP_FFMSK3(val)	bfin_write32(EMAC_WKUP_FFMSK3, val)
+#define bfin_read_EMAC_WKUP_FFCMD()		bfin_read32(EMAC_WKUP_FFCMD)
+#define bfin_write_EMAC_WKUP_FFCMD(val)		bfin_write32(EMAC_WKUP_FFCMD, val)
+#define bfin_read_EMAC_WKUP_FFOFF()		bfin_read32(EMAC_WKUP_FFOFF)
+#define bfin_write_EMAC_WKUP_FFOFF(val)		bfin_write32(EMAC_WKUP_FFOFF, val)
+#define bfin_read_EMAC_WKUP_FFCRC0()		bfin_read32(EMAC_WKUP_FFCRC0)
+#define bfin_write_EMAC_WKUP_FFCRC0(val)	bfin_write32(EMAC_WKUP_FFCRC0, val)
+#define bfin_read_EMAC_WKUP_FFCRC1()		bfin_read32(EMAC_WKUP_FFCRC1)
+#define bfin_write_EMAC_WKUP_FFCRC1(val)	bfin_write32(EMAC_WKUP_FFCRC1, val)
+
+#define bfin_read_EMAC_SYSCTL()			bfin_read32(EMAC_SYSCTL)
+#define bfin_write_EMAC_SYSCTL(val)		bfin_write32(EMAC_SYSCTL, val)
+#define bfin_read_EMAC_SYSTAT()			bfin_read32(EMAC_SYSTAT)
+#define bfin_write_EMAC_SYSTAT(val)		bfin_write32(EMAC_SYSTAT, val)
+#define bfin_read_EMAC_RX_STAT()		bfin_read32(EMAC_RX_STAT)
+#define bfin_write_EMAC_RX_STAT(val)		bfin_write32(EMAC_RX_STAT, val)
+#define bfin_read_EMAC_RX_STKY()		bfin_read32(EMAC_RX_STKY)
+#define bfin_write_EMAC_RX_STKY(val)		bfin_write32(EMAC_RX_STKY, val)
+#define bfin_read_EMAC_RX_IRQE()		bfin_read32(EMAC_RX_IRQE)
+#define bfin_write_EMAC_RX_IRQE(val)		bfin_write32(EMAC_RX_IRQE, val)
+#define bfin_read_EMAC_TX_STAT()		bfin_read32(EMAC_TX_STAT)
+#define bfin_write_EMAC_TX_STAT(val)		bfin_write32(EMAC_TX_STAT, val)
+#define bfin_read_EMAC_TX_STKY()		bfin_read32(EMAC_TX_STKY)
+#define bfin_write_EMAC_TX_STKY(val)		bfin_write32(EMAC_TX_STKY, val)
+#define bfin_read_EMAC_TX_IRQE()		bfin_read32(EMAC_TX_IRQE)
+#define bfin_write_EMAC_TX_IRQE(val)		bfin_write32(EMAC_TX_IRQE, val)
+
+#define bfin_read_EMAC_MMC_CTL()		bfin_read32(EMAC_MMC_CTL)
+#define bfin_write_EMAC_MMC_CTL(val)		bfin_write32(EMAC_MMC_CTL, val)
+#define bfin_read_EMAC_MMC_RIRQS()		bfin_read32(EMAC_MMC_RIRQS)
+#define bfin_write_EMAC_MMC_RIRQS(val)		bfin_write32(EMAC_MMC_RIRQS, val)
+#define bfin_read_EMAC_MMC_RIRQE()		bfin_read32(EMAC_MMC_RIRQE)
+#define bfin_write_EMAC_MMC_RIRQE(val)		bfin_write32(EMAC_MMC_RIRQE, val)
+#define bfin_read_EMAC_MMC_TIRQS()		bfin_read32(EMAC_MMC_TIRQS)
+#define bfin_write_EMAC_MMC_TIRQS(val)		bfin_write32(EMAC_MMC_TIRQS, val)
+#define bfin_read_EMAC_MMC_TIRQE()		bfin_read32(EMAC_MMC_TIRQE)
+#define bfin_write_EMAC_MMC_TIRQE(val)		bfin_write32(EMAC_MMC_TIRQE, val)
+
+#define bfin_read_EMAC_RXC_OK()			bfin_read32(EMAC_RXC_OK)
+#define bfin_write_EMAC_RXC_OK(val)		bfin_write32(EMAC_RXC_OK, val)
+#define bfin_read_EMAC_RXC_FCS()		bfin_read32(EMAC_RXC_FCS)
+#define bfin_write_EMAC_RXC_FCS(val)		bfin_write32(EMAC_RXC_FCS, val)
+#define bfin_read_EMAC_RXC_ALIGN()		bfin_read32(EMAC_RXC_ALIGN)
+#define bfin_write_EMAC_RXC_ALIGN(val)		bfin_write32(EMAC_RXC_ALIGN, val)
+#define bfin_read_EMAC_RXC_OCTET()		bfin_read32(EMAC_RXC_OCTET)
+#define bfin_write_EMAC_RXC_OCTET(val)		bfin_write32(EMAC_RXC_OCTET, val)
+#define bfin_read_EMAC_RXC_DMAOVF()		bfin_read32(EMAC_RXC_DMAOVF)
+#define bfin_write_EMAC_RXC_DMAOVF(val)		bfin_write32(EMAC_RXC_DMAOVF, val)
+#define bfin_read_EMAC_RXC_UNICST()		bfin_read32(EMAC_RXC_UNICST)
+#define bfin_write_EMAC_RXC_UNICST(val)		bfin_write32(EMAC_RXC_UNICST, val)
+#define bfin_read_EMAC_RXC_MULTI()		bfin_read32(EMAC_RXC_MULTI)
+#define bfin_write_EMAC_RXC_MULTI(val)		bfin_write32(EMAC_RXC_MULTI, val)
+#define bfin_read_EMAC_RXC_BROAD()		bfin_read32(EMAC_RXC_BROAD)
+#define bfin_write_EMAC_RXC_BROAD(val)		bfin_write32(EMAC_RXC_BROAD, val)
+#define bfin_read_EMAC_RXC_LNERRI()		bfin_read32(EMAC_RXC_LNERRI)
+#define bfin_write_EMAC_RXC_LNERRI(val)		bfin_write32(EMAC_RXC_LNERRI, val)
+#define bfin_read_EMAC_RXC_LNERRO()		bfin_read32(EMAC_RXC_LNERRO)
+#define bfin_write_EMAC_RXC_LNERRO(val)		bfin_write32(EMAC_RXC_LNERRO, val)
+#define bfin_read_EMAC_RXC_LONG()		bfin_read32(EMAC_RXC_LONG)
+#define bfin_write_EMAC_RXC_LONG(val)		bfin_write32(EMAC_RXC_LONG, val)
+#define bfin_read_EMAC_RXC_MACCTL()		bfin_read32(EMAC_RXC_MACCTL)
+#define bfin_write_EMAC_RXC_MACCTL(val)		bfin_write32(EMAC_RXC_MACCTL, val)
+#define bfin_read_EMAC_RXC_OPCODE()		bfin_read32(EMAC_RXC_OPCODE)
+#define bfin_write_EMAC_RXC_OPCODE(val)		bfin_write32(EMAC_RXC_OPCODE, val)
+#define bfin_read_EMAC_RXC_PAUSE()		bfin_read32(EMAC_RXC_PAUSE)
+#define bfin_write_EMAC_RXC_PAUSE(val)		bfin_write32(EMAC_RXC_PAUSE, val)
+#define bfin_read_EMAC_RXC_ALLFRM()		bfin_read32(EMAC_RXC_ALLFRM)
+#define bfin_write_EMAC_RXC_ALLFRM(val)		bfin_write32(EMAC_RXC_ALLFRM, val)
+#define bfin_read_EMAC_RXC_ALLOCT()		bfin_read32(EMAC_RXC_ALLOCT)
+#define bfin_write_EMAC_RXC_ALLOCT(val)		bfin_write32(EMAC_RXC_ALLOCT, val)
+#define bfin_read_EMAC_RXC_TYPED()		bfin_read32(EMAC_RXC_TYPED)
+#define bfin_write_EMAC_RXC_TYPED(val)		bfin_write32(EMAC_RXC_TYPED, val)
+#define bfin_read_EMAC_RXC_SHORT()		bfin_read32(EMAC_RXC_SHORT)
+#define bfin_write_EMAC_RXC_SHORT(val)		bfin_write32(EMAC_RXC_SHORT, val)
+#define bfin_read_EMAC_RXC_EQ64()		bfin_read32(EMAC_RXC_EQ64)
+#define bfin_write_EMAC_RXC_EQ64(val)		bfin_write32(EMAC_RXC_EQ64, val)
+#define bfin_read_EMAC_RXC_LT128()		bfin_read32(EMAC_RXC_LT128)
+#define bfin_write_EMAC_RXC_LT128(val)		bfin_write32(EMAC_RXC_LT128, val)
+#define bfin_read_EMAC_RXC_LT256()		bfin_read32(EMAC_RXC_LT256)
+#define bfin_write_EMAC_RXC_LT256(val)		bfin_write32(EMAC_RXC_LT256, val)
+#define bfin_read_EMAC_RXC_LT512()		bfin_read32(EMAC_RXC_LT512)
+#define bfin_write_EMAC_RXC_LT512(val)		bfin_write32(EMAC_RXC_LT512, val)
+#define bfin_read_EMAC_RXC_LT1024()		bfin_read32(EMAC_RXC_LT1024)
+#define bfin_write_EMAC_RXC_LT1024(val)		bfin_write32(EMAC_RXC_LT1024, val)
+#define bfin_read_EMAC_RXC_GE1024()		bfin_read32(EMAC_RXC_GE1024)
+#define bfin_write_EMAC_RXC_GE1024(val)		bfin_write32(EMAC_RXC_GE1024, val)
+
+#define bfin_read_EMAC_TXC_OK()			bfin_read32(EMAC_TXC_OK)
+#define bfin_write_EMAC_TXC_OK(val)		bfin_write32(EMAC_TXC_OK, val)
+#define bfin_read_EMAC_TXC_1COL()		bfin_read32(EMAC_TXC_1COL)
+#define bfin_write_EMAC_TXC_1COL(val)		bfin_write32(EMAC_TXC_1COL, val)
+#define bfin_read_EMAC_TXC_GT1COL()		bfin_read32(EMAC_TXC_GT1COL)
+#define bfin_write_EMAC_TXC_GT1COL(val)		bfin_write32(EMAC_TXC_GT1COL, val)
+#define bfin_read_EMAC_TXC_OCTET()		bfin_read32(EMAC_TXC_OCTET)
+#define bfin_write_EMAC_TXC_OCTET(val)		bfin_write32(EMAC_TXC_OCTET, val)
+#define bfin_read_EMAC_TXC_DEFER()		bfin_read32(EMAC_TXC_DEFER)
+#define bfin_write_EMAC_TXC_DEFER(val)		bfin_write32(EMAC_TXC_DEFER, val)
+#define bfin_read_EMAC_TXC_LATECL()		bfin_read32(EMAC_TXC_LATECL)
+#define bfin_write_EMAC_TXC_LATECL(val)		bfin_write32(EMAC_TXC_LATECL, val)
+#define bfin_read_EMAC_TXC_XS_COL()		bfin_read32(EMAC_TXC_XS_COL)
+#define bfin_write_EMAC_TXC_XS_COL(val)		bfin_write32(EMAC_TXC_XS_COL, val)
+#define bfin_read_EMAC_TXC_DMAUND()		bfin_read32(EMAC_TXC_DMAUND)
+#define bfin_write_EMAC_TXC_DMAUND(val)		bfin_write32(EMAC_TXC_DMAUND, val)
+#define bfin_read_EMAC_TXC_CRSERR()		bfin_read32(EMAC_TXC_CRSERR)
+#define bfin_write_EMAC_TXC_CRSERR(val)		bfin_write32(EMAC_TXC_CRSERR, val)
+#define bfin_read_EMAC_TXC_UNICST()		bfin_read32(EMAC_TXC_UNICST)
+#define bfin_write_EMAC_TXC_UNICST(val)		bfin_write32(EMAC_TXC_UNICST, val)
+#define bfin_read_EMAC_TXC_MULTI()		bfin_read32(EMAC_TXC_MULTI)
+#define bfin_write_EMAC_TXC_MULTI(val)		bfin_write32(EMAC_TXC_MULTI, val)
+#define bfin_read_EMAC_TXC_BROAD()		bfin_read32(EMAC_TXC_BROAD)
+#define bfin_write_EMAC_TXC_BROAD(val)		bfin_write32(EMAC_TXC_BROAD, val)
+#define bfin_read_EMAC_TXC_XS_DFR()		bfin_read32(EMAC_TXC_XS_DFR)
+#define bfin_write_EMAC_TXC_XS_DFR(val)		bfin_write32(EMAC_TXC_XS_DFR, val)
+#define bfin_read_EMAC_TXC_MACCTL()		bfin_read32(EMAC_TXC_MACCTL)
+#define bfin_write_EMAC_TXC_MACCTL(val)		bfin_write32(EMAC_TXC_MACCTL, val)
+#define bfin_read_EMAC_TXC_ALLFRM()		bfin_read32(EMAC_TXC_ALLFRM)
+#define bfin_write_EMAC_TXC_ALLFRM(val)		bfin_write32(EMAC_TXC_ALLFRM, val)
+#define bfin_read_EMAC_TXC_ALLOCT()		bfin_read32(EMAC_TXC_ALLOCT)
+#define bfin_write_EMAC_TXC_ALLOCT(val)		bfin_write32(EMAC_TXC_ALLOCT, val)
+#define bfin_read_EMAC_TXC_EQ64()		bfin_read32(EMAC_TXC_EQ64)
+#define bfin_write_EMAC_TXC_EQ64(val)		bfin_write32(EMAC_TXC_EQ64, val)
+#define bfin_read_EMAC_TXC_LT128()		bfin_read32(EMAC_TXC_LT128)
+#define bfin_write_EMAC_TXC_LT128(val)		bfin_write32(EMAC_TXC_LT128, val)
+#define bfin_read_EMAC_TXC_LT256()		bfin_read32(EMAC_TXC_LT256)
+#define bfin_write_EMAC_TXC_LT256(val)		bfin_write32(EMAC_TXC_LT256, val)
+#define bfin_read_EMAC_TXC_LT512()		bfin_read32(EMAC_TXC_LT512)
+#define bfin_write_EMAC_TXC_LT512(val)		bfin_write32(EMAC_TXC_LT512, val)
+#define bfin_read_EMAC_TXC_LT1024()		bfin_read32(EMAC_TXC_LT1024)
+#define bfin_write_EMAC_TXC_LT1024(val)		bfin_write32(EMAC_TXC_LT1024, val)
+#define bfin_read_EMAC_TXC_GE1024()		bfin_read32(EMAC_TXC_GE1024)
+#define bfin_write_EMAC_TXC_GE1024(val)		bfin_write32(EMAC_TXC_GE1024, val)
+#define bfin_read_EMAC_TXC_ABORT()		bfin_read32(EMAC_TXC_ABORT)
+#define bfin_write_EMAC_TXC_ABORT(val)		bfin_write32(EMAC_TXC_ABORT, val)
+
+#endif /* _CDEF_BF527_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/defBF522.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/defBF522.h
new file mode 100644
index 0000000..e007017
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/defBF522.h
@@ -0,0 +1,1309 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF522_H
+#define _DEF_BF522_H
+
+/* ************************************************************** */
+/*   SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF52x    */
+/* ************************************************************** */
+
+/* ==== begin from defBF534.h ==== */
+
+/* Clock and System Control	(0xFFC00000 - 0xFFC000FF)								*/
+#define PLL_CTL				0xFFC00000	/* PLL Control Register						*/
+#define PLL_DIV				0xFFC00004	/* PLL Divide Register						*/
+#define VR_CTL				0xFFC00008	/* Voltage Regulator Control Register		*/
+#define PLL_STAT			0xFFC0000C	/* PLL Status Register						*/
+#define PLL_LOCKCNT			0xFFC00010	/* PLL Lock Count Register					*/
+#define CHIPID        0xFFC00014  /* Device ID Register */
+
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF)							*/
+#define SWRST				0xFFC00100	/* Software Reset Register					*/
+#define SYSCR				0xFFC00104	/* System Configuration Register			*/
+#define SIC_RVECT			0xFFC00108	/* Interrupt Reset Vector Address Register	*/
+
+#define SIC_IMASK0			0xFFC0010C	/* Interrupt Mask Register					*/
+#define SIC_IAR0			0xFFC00110	/* Interrupt Assignment Register 0			*/
+#define SIC_IAR1			0xFFC00114	/* Interrupt Assignment Register 1			*/
+#define SIC_IAR2			0xFFC00118	/* Interrupt Assignment Register 2			*/
+#define SIC_IAR3			0xFFC0011C	/* Interrupt Assignment Register 3			*/
+#define SIC_ISR0				0xFFC00120	/* Interrupt Status Register				*/
+#define SIC_IWR0				0xFFC00124	/* Interrupt Wakeup Register				*/
+
+/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */
+#define SIC_IMASK1                      0xFFC0014C     /* Interrupt Mask register of SIC2 */
+#define SIC_IAR4                        0xFFC00150     /* Interrupt Assignment register4 */
+#define SIC_IAR5                        0xFFC00154     /* Interrupt Assignment register5 */
+#define SIC_IAR6                        0xFFC00158     /* Interrupt Assignment register6 */
+#define SIC_IAR7                        0xFFC0015C     /* Interrupt Assignment register7 */
+#define SIC_ISR1                        0xFFC00160     /* Interrupt Statur register */
+#define SIC_IWR1                        0xFFC00164     /* Interrupt Wakeup register */
+
+
+/* Watchdog Timer			(0xFFC00200 - 0xFFC002FF)								*/
+#define WDOG_CTL			0xFFC00200	/* Watchdog Control Register				*/
+#define WDOG_CNT			0xFFC00204	/* Watchdog Count Register					*/
+#define WDOG_STAT			0xFFC00208	/* Watchdog Status Register					*/
+
+
+/* Real Time Clock		(0xFFC00300 - 0xFFC003FF)									*/
+#define RTC_STAT			0xFFC00300	/* RTC Status Register						*/
+#define RTC_ICTL			0xFFC00304	/* RTC Interrupt Control Register			*/
+#define RTC_ISTAT			0xFFC00308	/* RTC Interrupt Status Register			*/
+#define RTC_SWCNT			0xFFC0030C	/* RTC Stopwatch Count Register				*/
+#define RTC_ALARM			0xFFC00310	/* RTC Alarm Time Register					*/
+#define RTC_FAST			0xFFC00314	/* RTC Prescaler Enable Register			*/
+#define RTC_PREN			0xFFC00314	/* RTC Prescaler Enable Alternate Macro		*/
+
+
+/* UART0 Controller		(0xFFC00400 - 0xFFC004FF)									*/
+#define UART0_THR			0xFFC00400	/* Transmit Holding register				*/
+#define UART0_RBR			0xFFC00400	/* Receive Buffer register					*/
+#define UART0_DLL			0xFFC00400	/* Divisor Latch (Low-Byte)					*/
+#define UART0_IER			0xFFC00404	/* Interrupt Enable Register				*/
+#define UART0_DLH			0xFFC00404	/* Divisor Latch (High-Byte)				*/
+#define UART0_IIR			0xFFC00408	/* Interrupt Identification Register		*/
+#define UART0_LCR			0xFFC0040C	/* Line Control Register					*/
+#define UART0_MCR			0xFFC00410	/* Modem Control Register					*/
+#define UART0_LSR			0xFFC00414	/* Line Status Register						*/
+#define UART0_MSR			0xFFC00418	/* Modem Status Register					*/
+#define UART0_SCR			0xFFC0041C	/* SCR Scratch Register						*/
+#define UART0_GCTL			0xFFC00424	/* Global Control Register					*/
+
+
+/* SPI Controller			(0xFFC00500 - 0xFFC005FF)								*/
+#define SPI0_REGBASE			0xFFC00500
+#define SPI_CTL				0xFFC00500	/* SPI Control Register						*/
+#define SPI_FLG				0xFFC00504	/* SPI Flag register						*/
+#define SPI_STAT			0xFFC00508	/* SPI Status register						*/
+#define SPI_TDBR			0xFFC0050C	/* SPI Transmit Data Buffer Register		*/
+#define SPI_RDBR			0xFFC00510	/* SPI Receive Data Buffer Register			*/
+#define SPI_BAUD			0xFFC00514	/* SPI Baud rate Register					*/
+#define SPI_SHADOW			0xFFC00518	/* SPI_RDBR Shadow Register					*/
+
+
+/* TIMER0-7 Registers		(0xFFC00600 - 0xFFC006FF)								*/
+#define TIMER0_CONFIG		0xFFC00600	/* Timer 0 Configuration Register			*/
+#define TIMER0_COUNTER		0xFFC00604	/* Timer 0 Counter Register					*/
+#define TIMER0_PERIOD		0xFFC00608	/* Timer 0 Period Register					*/
+#define TIMER0_WIDTH		0xFFC0060C	/* Timer 0 Width Register					*/
+
+#define TIMER1_CONFIG		0xFFC00610	/* Timer 1 Configuration Register  			*/
+#define TIMER1_COUNTER		0xFFC00614	/* Timer 1 Counter Register        			*/
+#define TIMER1_PERIOD		0xFFC00618	/* Timer 1 Period Register         			*/
+#define TIMER1_WIDTH		0xFFC0061C	/* Timer 1 Width Register          			*/
+
+#define TIMER2_CONFIG		0xFFC00620	/* Timer 2 Configuration Register  			*/
+#define TIMER2_COUNTER		0xFFC00624	/* Timer 2 Counter Register        			*/
+#define TIMER2_PERIOD		0xFFC00628	/* Timer 2 Period Register         			*/
+#define TIMER2_WIDTH		0xFFC0062C	/* Timer 2 Width Register          			*/
+
+#define TIMER3_CONFIG		0xFFC00630	/* Timer 3 Configuration Register			*/
+#define TIMER3_COUNTER		0xFFC00634	/* Timer 3 Counter Register					*/
+#define TIMER3_PERIOD		0xFFC00638	/* Timer 3 Period Register					*/
+#define TIMER3_WIDTH		0xFFC0063C	/* Timer 3 Width Register					*/
+
+#define TIMER4_CONFIG		0xFFC00640	/* Timer 4 Configuration Register  			*/
+#define TIMER4_COUNTER		0xFFC00644	/* Timer 4 Counter Register        			*/
+#define TIMER4_PERIOD		0xFFC00648	/* Timer 4 Period Register         			*/
+#define TIMER4_WIDTH		0xFFC0064C	/* Timer 4 Width Register          			*/
+
+#define TIMER5_CONFIG		0xFFC00650	/* Timer 5 Configuration Register  			*/
+#define TIMER5_COUNTER		0xFFC00654	/* Timer 5 Counter Register        			*/
+#define TIMER5_PERIOD		0xFFC00658	/* Timer 5 Period Register         			*/
+#define TIMER5_WIDTH		0xFFC0065C	/* Timer 5 Width Register          			*/
+
+#define TIMER6_CONFIG		0xFFC00660	/* Timer 6 Configuration Register  			*/
+#define TIMER6_COUNTER		0xFFC00664	/* Timer 6 Counter Register        			*/
+#define TIMER6_PERIOD		0xFFC00668	/* Timer 6 Period Register         			*/
+#define TIMER6_WIDTH		0xFFC0066C	/* Timer 6 Width Register          			*/
+
+#define TIMER7_CONFIG		0xFFC00670	/* Timer 7 Configuration Register  			*/
+#define TIMER7_COUNTER		0xFFC00674	/* Timer 7 Counter Register        			*/
+#define TIMER7_PERIOD		0xFFC00678	/* Timer 7 Period Register         			*/
+#define TIMER7_WIDTH		0xFFC0067C	/* Timer 7 Width Register       			*/
+
+#define TIMER_ENABLE		0xFFC00680	/* Timer Enable Register					*/
+#define TIMER_DISABLE		0xFFC00684	/* Timer Disable Register					*/
+#define TIMER_STATUS		0xFFC00688	/* Timer Status Register					*/
+
+
+/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF)												*/
+#define PORTFIO					0xFFC00700	/* Port F I/O Pin State Specify Register				*/
+#define PORTFIO_CLEAR			0xFFC00704	/* Port F I/O Peripheral Interrupt Clear Register		*/
+#define PORTFIO_SET				0xFFC00708	/* Port F I/O Peripheral Interrupt Set Register			*/
+#define PORTFIO_TOGGLE			0xFFC0070C	/* Port F I/O Pin State Toggle Register					*/
+#define PORTFIO_MASKA			0xFFC00710	/* Port F I/O Mask State Specify Interrupt A Register	*/
+#define PORTFIO_MASKA_CLEAR		0xFFC00714	/* Port F I/O Mask Disable Interrupt A Register			*/
+#define PORTFIO_MASKA_SET		0xFFC00718	/* Port F I/O Mask Enable Interrupt A Register			*/
+#define PORTFIO_MASKA_TOGGLE	0xFFC0071C	/* Port F I/O Mask Toggle Enable Interrupt A Register	*/
+#define PORTFIO_MASKB			0xFFC00720	/* Port F I/O Mask State Specify Interrupt B Register	*/
+#define PORTFIO_MASKB_CLEAR		0xFFC00724	/* Port F I/O Mask Disable Interrupt B Register			*/
+#define PORTFIO_MASKB_SET		0xFFC00728	/* Port F I/O Mask Enable Interrupt B Register			*/
+#define PORTFIO_MASKB_TOGGLE	0xFFC0072C	/* Port F I/O Mask Toggle Enable Interrupt B Register	*/
+#define PORTFIO_DIR				0xFFC00730	/* Port F I/O Direction Register						*/
+#define PORTFIO_POLAR			0xFFC00734	/* Port F I/O Source Polarity Register					*/
+#define PORTFIO_EDGE			0xFFC00738	/* Port F I/O Source Sensitivity Register				*/
+#define PORTFIO_BOTH			0xFFC0073C	/* Port F I/O Set on BOTH Edges Register				*/
+#define PORTFIO_INEN			0xFFC00740	/* Port F I/O Input Enable Register 					*/
+
+
+/* SPORT0 Controller		(0xFFC00800 - 0xFFC008FF)										*/
+#define SPORT0_TCR1			0xFFC00800	/* SPORT0 Transmit Configuration 1 Register			*/
+#define SPORT0_TCR2			0xFFC00804	/* SPORT0 Transmit Configuration 2 Register			*/
+#define SPORT0_TCLKDIV		0xFFC00808	/* SPORT0 Transmit Clock Divider					*/
+#define SPORT0_TFSDIV		0xFFC0080C	/* SPORT0 Transmit Frame Sync Divider				*/
+#define SPORT0_TX			0xFFC00810	/* SPORT0 TX Data Register							*/
+#define SPORT0_RX			0xFFC00818	/* SPORT0 RX Data Register							*/
+#define SPORT0_RCR1			0xFFC00820	/* SPORT0 Transmit Configuration 1 Register			*/
+#define SPORT0_RCR2			0xFFC00824	/* SPORT0 Transmit Configuration 2 Register			*/
+#define SPORT0_RCLKDIV		0xFFC00828	/* SPORT0 Receive Clock Divider						*/
+#define SPORT0_RFSDIV		0xFFC0082C	/* SPORT0 Receive Frame Sync Divider				*/
+#define SPORT0_STAT			0xFFC00830	/* SPORT0 Status Register							*/
+#define SPORT0_CHNL			0xFFC00834	/* SPORT0 Current Channel Register					*/
+#define SPORT0_MCMC1		0xFFC00838	/* SPORT0 Multi-Channel Configuration Register 1	*/
+#define SPORT0_MCMC2		0xFFC0083C	/* SPORT0 Multi-Channel Configuration Register 2	*/
+#define SPORT0_MTCS0		0xFFC00840	/* SPORT0 Multi-Channel Transmit Select Register 0	*/
+#define SPORT0_MTCS1		0xFFC00844	/* SPORT0 Multi-Channel Transmit Select Register 1	*/
+#define SPORT0_MTCS2		0xFFC00848	/* SPORT0 Multi-Channel Transmit Select Register 2	*/
+#define SPORT0_MTCS3		0xFFC0084C	/* SPORT0 Multi-Channel Transmit Select Register 3	*/
+#define SPORT0_MRCS0		0xFFC00850	/* SPORT0 Multi-Channel Receive Select Register 0	*/
+#define SPORT0_MRCS1		0xFFC00854	/* SPORT0 Multi-Channel Receive Select Register 1	*/
+#define SPORT0_MRCS2		0xFFC00858	/* SPORT0 Multi-Channel Receive Select Register 2	*/
+#define SPORT0_MRCS3		0xFFC0085C	/* SPORT0 Multi-Channel Receive Select Register 3	*/
+
+
+/* SPORT1 Controller		(0xFFC00900 - 0xFFC009FF)										*/
+#define SPORT1_TCR1			0xFFC00900	/* SPORT1 Transmit Configuration 1 Register			*/
+#define SPORT1_TCR2			0xFFC00904	/* SPORT1 Transmit Configuration 2 Register			*/
+#define SPORT1_TCLKDIV		0xFFC00908	/* SPORT1 Transmit Clock Divider					*/
+#define SPORT1_TFSDIV		0xFFC0090C	/* SPORT1 Transmit Frame Sync Divider				*/
+#define SPORT1_TX			0xFFC00910	/* SPORT1 TX Data Register							*/
+#define SPORT1_RX			0xFFC00918	/* SPORT1 RX Data Register							*/
+#define SPORT1_RCR1			0xFFC00920	/* SPORT1 Transmit Configuration 1 Register			*/
+#define SPORT1_RCR2			0xFFC00924	/* SPORT1 Transmit Configuration 2 Register			*/
+#define SPORT1_RCLKDIV		0xFFC00928	/* SPORT1 Receive Clock Divider						*/
+#define SPORT1_RFSDIV		0xFFC0092C	/* SPORT1 Receive Frame Sync Divider				*/
+#define SPORT1_STAT			0xFFC00930	/* SPORT1 Status Register							*/
+#define SPORT1_CHNL			0xFFC00934	/* SPORT1 Current Channel Register					*/
+#define SPORT1_MCMC1		0xFFC00938	/* SPORT1 Multi-Channel Configuration Register 1	*/
+#define SPORT1_MCMC2		0xFFC0093C	/* SPORT1 Multi-Channel Configuration Register 2	*/
+#define SPORT1_MTCS0		0xFFC00940	/* SPORT1 Multi-Channel Transmit Select Register 0	*/
+#define SPORT1_MTCS1		0xFFC00944	/* SPORT1 Multi-Channel Transmit Select Register 1	*/
+#define SPORT1_MTCS2		0xFFC00948	/* SPORT1 Multi-Channel Transmit Select Register 2	*/
+#define SPORT1_MTCS3		0xFFC0094C	/* SPORT1 Multi-Channel Transmit Select Register 3	*/
+#define SPORT1_MRCS0		0xFFC00950	/* SPORT1 Multi-Channel Receive Select Register 0	*/
+#define SPORT1_MRCS1		0xFFC00954	/* SPORT1 Multi-Channel Receive Select Register 1	*/
+#define SPORT1_MRCS2		0xFFC00958	/* SPORT1 Multi-Channel Receive Select Register 2	*/
+#define SPORT1_MRCS3		0xFFC0095C	/* SPORT1 Multi-Channel Receive Select Register 3	*/
+
+
+/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF)								*/
+#define EBIU_AMGCTL			0xFFC00A00	/* Asynchronous Memory Global Control Register	*/
+#define EBIU_AMBCTL0		0xFFC00A04	/* Asynchronous Memory Bank Control Register 0	*/
+#define EBIU_AMBCTL1		0xFFC00A08	/* Asynchronous Memory Bank Control Register 1	*/
+#define EBIU_SDGCTL			0xFFC00A10	/* SDRAM Global Control Register				*/
+#define EBIU_SDBCTL			0xFFC00A14	/* SDRAM Bank Control Register					*/
+#define EBIU_SDRRC			0xFFC00A18	/* SDRAM Refresh Rate Control Register			*/
+#define EBIU_SDSTAT			0xFFC00A1C	/* SDRAM Status Register						*/
+
+
+/* DMA Traffic Control Registers													*/
+#define DMAC_TC_PER			0xFFC00B0C	/* Traffic Control Periods Register			*/
+#define DMAC_TC_CNT			0xFFC00B10	/* Traffic Control Current Counts Register	*/
+
+/* DMA Controller (0xFFC00C00 - 0xFFC00FFF)															*/
+#define DMA0_NEXT_DESC_PTR		0xFFC00C00	/* DMA Channel 0 Next Descriptor Pointer Register		*/
+#define DMA0_START_ADDR			0xFFC00C04	/* DMA Channel 0 Start Address Register					*/
+#define DMA0_CONFIG				0xFFC00C08	/* DMA Channel 0 Configuration Register					*/
+#define DMA0_X_COUNT			0xFFC00C10	/* DMA Channel 0 X Count Register						*/
+#define DMA0_X_MODIFY			0xFFC00C14	/* DMA Channel 0 X Modify Register						*/
+#define DMA0_Y_COUNT			0xFFC00C18	/* DMA Channel 0 Y Count Register						*/
+#define DMA0_Y_MODIFY			0xFFC00C1C	/* DMA Channel 0 Y Modify Register						*/
+#define DMA0_CURR_DESC_PTR		0xFFC00C20	/* DMA Channel 0 Current Descriptor Pointer Register	*/
+#define DMA0_CURR_ADDR			0xFFC00C24	/* DMA Channel 0 Current Address Register				*/
+#define DMA0_IRQ_STATUS			0xFFC00C28	/* DMA Channel 0 Interrupt/Status Register				*/
+#define DMA0_PERIPHERAL_MAP		0xFFC00C2C	/* DMA Channel 0 Peripheral Map Register				*/
+#define DMA0_CURR_X_COUNT		0xFFC00C30	/* DMA Channel 0 Current X Count Register				*/
+#define DMA0_CURR_Y_COUNT		0xFFC00C38	/* DMA Channel 0 Current Y Count Register				*/
+
+#define DMA1_NEXT_DESC_PTR		0xFFC00C40	/* DMA Channel 1 Next Descriptor Pointer Register		*/
+#define DMA1_START_ADDR			0xFFC00C44	/* DMA Channel 1 Start Address Register					*/
+#define DMA1_CONFIG				0xFFC00C48	/* DMA Channel 1 Configuration Register					*/
+#define DMA1_X_COUNT			0xFFC00C50	/* DMA Channel 1 X Count Register						*/
+#define DMA1_X_MODIFY			0xFFC00C54	/* DMA Channel 1 X Modify Register						*/
+#define DMA1_Y_COUNT			0xFFC00C58	/* DMA Channel 1 Y Count Register						*/
+#define DMA1_Y_MODIFY			0xFFC00C5C	/* DMA Channel 1 Y Modify Register						*/
+#define DMA1_CURR_DESC_PTR		0xFFC00C60	/* DMA Channel 1 Current Descriptor Pointer Register	*/
+#define DMA1_CURR_ADDR			0xFFC00C64	/* DMA Channel 1 Current Address Register				*/
+#define DMA1_IRQ_STATUS			0xFFC00C68	/* DMA Channel 1 Interrupt/Status Register				*/
+#define DMA1_PERIPHERAL_MAP		0xFFC00C6C	/* DMA Channel 1 Peripheral Map Register				*/
+#define DMA1_CURR_X_COUNT		0xFFC00C70	/* DMA Channel 1 Current X Count Register				*/
+#define DMA1_CURR_Y_COUNT		0xFFC00C78	/* DMA Channel 1 Current Y Count Register				*/
+
+#define DMA2_NEXT_DESC_PTR		0xFFC00C80	/* DMA Channel 2 Next Descriptor Pointer Register		*/
+#define DMA2_START_ADDR			0xFFC00C84	/* DMA Channel 2 Start Address Register					*/
+#define DMA2_CONFIG				0xFFC00C88	/* DMA Channel 2 Configuration Register					*/
+#define DMA2_X_COUNT			0xFFC00C90	/* DMA Channel 2 X Count Register						*/
+#define DMA2_X_MODIFY			0xFFC00C94	/* DMA Channel 2 X Modify Register						*/
+#define DMA2_Y_COUNT			0xFFC00C98	/* DMA Channel 2 Y Count Register						*/
+#define DMA2_Y_MODIFY			0xFFC00C9C	/* DMA Channel 2 Y Modify Register						*/
+#define DMA2_CURR_DESC_PTR		0xFFC00CA0	/* DMA Channel 2 Current Descriptor Pointer Register	*/
+#define DMA2_CURR_ADDR			0xFFC00CA4	/* DMA Channel 2 Current Address Register				*/
+#define DMA2_IRQ_STATUS			0xFFC00CA8	/* DMA Channel 2 Interrupt/Status Register				*/
+#define DMA2_PERIPHERAL_MAP		0xFFC00CAC	/* DMA Channel 2 Peripheral Map Register				*/
+#define DMA2_CURR_X_COUNT		0xFFC00CB0	/* DMA Channel 2 Current X Count Register				*/
+#define DMA2_CURR_Y_COUNT		0xFFC00CB8	/* DMA Channel 2 Current Y Count Register				*/
+
+#define DMA3_NEXT_DESC_PTR		0xFFC00CC0	/* DMA Channel 3 Next Descriptor Pointer Register		*/
+#define DMA3_START_ADDR			0xFFC00CC4	/* DMA Channel 3 Start Address Register					*/
+#define DMA3_CONFIG				0xFFC00CC8	/* DMA Channel 3 Configuration Register					*/
+#define DMA3_X_COUNT			0xFFC00CD0	/* DMA Channel 3 X Count Register						*/
+#define DMA3_X_MODIFY			0xFFC00CD4	/* DMA Channel 3 X Modify Register						*/
+#define DMA3_Y_COUNT			0xFFC00CD8	/* DMA Channel 3 Y Count Register						*/
+#define DMA3_Y_MODIFY			0xFFC00CDC	/* DMA Channel 3 Y Modify Register						*/
+#define DMA3_CURR_DESC_PTR		0xFFC00CE0	/* DMA Channel 3 Current Descriptor Pointer Register	*/
+#define DMA3_CURR_ADDR			0xFFC00CE4	/* DMA Channel 3 Current Address Register				*/
+#define DMA3_IRQ_STATUS			0xFFC00CE8	/* DMA Channel 3 Interrupt/Status Register				*/
+#define DMA3_PERIPHERAL_MAP		0xFFC00CEC	/* DMA Channel 3 Peripheral Map Register				*/
+#define DMA3_CURR_X_COUNT		0xFFC00CF0	/* DMA Channel 3 Current X Count Register				*/
+#define DMA3_CURR_Y_COUNT		0xFFC00CF8	/* DMA Channel 3 Current Y Count Register				*/
+
+#define DMA4_NEXT_DESC_PTR		0xFFC00D00	/* DMA Channel 4 Next Descriptor Pointer Register		*/
+#define DMA4_START_ADDR			0xFFC00D04	/* DMA Channel 4 Start Address Register					*/
+#define DMA4_CONFIG				0xFFC00D08	/* DMA Channel 4 Configuration Register					*/
+#define DMA4_X_COUNT			0xFFC00D10	/* DMA Channel 4 X Count Register						*/
+#define DMA4_X_MODIFY			0xFFC00D14	/* DMA Channel 4 X Modify Register						*/
+#define DMA4_Y_COUNT			0xFFC00D18	/* DMA Channel 4 Y Count Register						*/
+#define DMA4_Y_MODIFY			0xFFC00D1C	/* DMA Channel 4 Y Modify Register						*/
+#define DMA4_CURR_DESC_PTR		0xFFC00D20	/* DMA Channel 4 Current Descriptor Pointer Register	*/
+#define DMA4_CURR_ADDR			0xFFC00D24	/* DMA Channel 4 Current Address Register				*/
+#define DMA4_IRQ_STATUS			0xFFC00D28	/* DMA Channel 4 Interrupt/Status Register				*/
+#define DMA4_PERIPHERAL_MAP		0xFFC00D2C	/* DMA Channel 4 Peripheral Map Register				*/
+#define DMA4_CURR_X_COUNT		0xFFC00D30	/* DMA Channel 4 Current X Count Register				*/
+#define DMA4_CURR_Y_COUNT		0xFFC00D38	/* DMA Channel 4 Current Y Count Register				*/
+
+#define DMA5_NEXT_DESC_PTR		0xFFC00D40	/* DMA Channel 5 Next Descriptor Pointer Register		*/
+#define DMA5_START_ADDR			0xFFC00D44	/* DMA Channel 5 Start Address Register					*/
+#define DMA5_CONFIG				0xFFC00D48	/* DMA Channel 5 Configuration Register					*/
+#define DMA5_X_COUNT			0xFFC00D50	/* DMA Channel 5 X Count Register						*/
+#define DMA5_X_MODIFY			0xFFC00D54	/* DMA Channel 5 X Modify Register						*/
+#define DMA5_Y_COUNT			0xFFC00D58	/* DMA Channel 5 Y Count Register						*/
+#define DMA5_Y_MODIFY			0xFFC00D5C	/* DMA Channel 5 Y Modify Register						*/
+#define DMA5_CURR_DESC_PTR		0xFFC00D60	/* DMA Channel 5 Current Descriptor Pointer Register	*/
+#define DMA5_CURR_ADDR			0xFFC00D64	/* DMA Channel 5 Current Address Register				*/
+#define DMA5_IRQ_STATUS			0xFFC00D68	/* DMA Channel 5 Interrupt/Status Register				*/
+#define DMA5_PERIPHERAL_MAP		0xFFC00D6C	/* DMA Channel 5 Peripheral Map Register				*/
+#define DMA5_CURR_X_COUNT		0xFFC00D70	/* DMA Channel 5 Current X Count Register				*/
+#define DMA5_CURR_Y_COUNT		0xFFC00D78	/* DMA Channel 5 Current Y Count Register				*/
+
+#define DMA6_NEXT_DESC_PTR		0xFFC00D80	/* DMA Channel 6 Next Descriptor Pointer Register		*/
+#define DMA6_START_ADDR			0xFFC00D84	/* DMA Channel 6 Start Address Register					*/
+#define DMA6_CONFIG				0xFFC00D88	/* DMA Channel 6 Configuration Register					*/
+#define DMA6_X_COUNT			0xFFC00D90	/* DMA Channel 6 X Count Register						*/
+#define DMA6_X_MODIFY			0xFFC00D94	/* DMA Channel 6 X Modify Register						*/
+#define DMA6_Y_COUNT			0xFFC00D98	/* DMA Channel 6 Y Count Register						*/
+#define DMA6_Y_MODIFY			0xFFC00D9C	/* DMA Channel 6 Y Modify Register						*/
+#define DMA6_CURR_DESC_PTR		0xFFC00DA0	/* DMA Channel 6 Current Descriptor Pointer Register	*/
+#define DMA6_CURR_ADDR			0xFFC00DA4	/* DMA Channel 6 Current Address Register				*/
+#define DMA6_IRQ_STATUS			0xFFC00DA8	/* DMA Channel 6 Interrupt/Status Register				*/
+#define DMA6_PERIPHERAL_MAP		0xFFC00DAC	/* DMA Channel 6 Peripheral Map Register				*/
+#define DMA6_CURR_X_COUNT		0xFFC00DB0	/* DMA Channel 6 Current X Count Register				*/
+#define DMA6_CURR_Y_COUNT		0xFFC00DB8	/* DMA Channel 6 Current Y Count Register				*/
+
+#define DMA7_NEXT_DESC_PTR		0xFFC00DC0	/* DMA Channel 7 Next Descriptor Pointer Register		*/
+#define DMA7_START_ADDR			0xFFC00DC4	/* DMA Channel 7 Start Address Register					*/
+#define DMA7_CONFIG				0xFFC00DC8	/* DMA Channel 7 Configuration Register					*/
+#define DMA7_X_COUNT			0xFFC00DD0	/* DMA Channel 7 X Count Register						*/
+#define DMA7_X_MODIFY			0xFFC00DD4	/* DMA Channel 7 X Modify Register						*/
+#define DMA7_Y_COUNT			0xFFC00DD8	/* DMA Channel 7 Y Count Register						*/
+#define DMA7_Y_MODIFY			0xFFC00DDC	/* DMA Channel 7 Y Modify Register						*/
+#define DMA7_CURR_DESC_PTR		0xFFC00DE0	/* DMA Channel 7 Current Descriptor Pointer Register	*/
+#define DMA7_CURR_ADDR			0xFFC00DE4	/* DMA Channel 7 Current Address Register				*/
+#define DMA7_IRQ_STATUS			0xFFC00DE8	/* DMA Channel 7 Interrupt/Status Register				*/
+#define DMA7_PERIPHERAL_MAP		0xFFC00DEC	/* DMA Channel 7 Peripheral Map Register				*/
+#define DMA7_CURR_X_COUNT		0xFFC00DF0	/* DMA Channel 7 Current X Count Register				*/
+#define DMA7_CURR_Y_COUNT		0xFFC00DF8	/* DMA Channel 7 Current Y Count Register				*/
+
+#define DMA8_NEXT_DESC_PTR		0xFFC00E00	/* DMA Channel 8 Next Descriptor Pointer Register		*/
+#define DMA8_START_ADDR			0xFFC00E04	/* DMA Channel 8 Start Address Register					*/
+#define DMA8_CONFIG				0xFFC00E08	/* DMA Channel 8 Configuration Register					*/
+#define DMA8_X_COUNT			0xFFC00E10	/* DMA Channel 8 X Count Register						*/
+#define DMA8_X_MODIFY			0xFFC00E14	/* DMA Channel 8 X Modify Register						*/
+#define DMA8_Y_COUNT			0xFFC00E18	/* DMA Channel 8 Y Count Register						*/
+#define DMA8_Y_MODIFY			0xFFC00E1C	/* DMA Channel 8 Y Modify Register						*/
+#define DMA8_CURR_DESC_PTR		0xFFC00E20	/* DMA Channel 8 Current Descriptor Pointer Register	*/
+#define DMA8_CURR_ADDR			0xFFC00E24	/* DMA Channel 8 Current Address Register				*/
+#define DMA8_IRQ_STATUS			0xFFC00E28	/* DMA Channel 8 Interrupt/Status Register				*/
+#define DMA8_PERIPHERAL_MAP		0xFFC00E2C	/* DMA Channel 8 Peripheral Map Register				*/
+#define DMA8_CURR_X_COUNT		0xFFC00E30	/* DMA Channel 8 Current X Count Register				*/
+#define DMA8_CURR_Y_COUNT		0xFFC00E38	/* DMA Channel 8 Current Y Count Register				*/
+
+#define DMA9_NEXT_DESC_PTR		0xFFC00E40	/* DMA Channel 9 Next Descriptor Pointer Register		*/
+#define DMA9_START_ADDR			0xFFC00E44	/* DMA Channel 9 Start Address Register					*/
+#define DMA9_CONFIG				0xFFC00E48	/* DMA Channel 9 Configuration Register					*/
+#define DMA9_X_COUNT			0xFFC00E50	/* DMA Channel 9 X Count Register						*/
+#define DMA9_X_MODIFY			0xFFC00E54	/* DMA Channel 9 X Modify Register						*/
+#define DMA9_Y_COUNT			0xFFC00E58	/* DMA Channel 9 Y Count Register						*/
+#define DMA9_Y_MODIFY			0xFFC00E5C	/* DMA Channel 9 Y Modify Register						*/
+#define DMA9_CURR_DESC_PTR		0xFFC00E60	/* DMA Channel 9 Current Descriptor Pointer Register	*/
+#define DMA9_CURR_ADDR			0xFFC00E64	/* DMA Channel 9 Current Address Register				*/
+#define DMA9_IRQ_STATUS			0xFFC00E68	/* DMA Channel 9 Interrupt/Status Register				*/
+#define DMA9_PERIPHERAL_MAP		0xFFC00E6C	/* DMA Channel 9 Peripheral Map Register				*/
+#define DMA9_CURR_X_COUNT		0xFFC00E70	/* DMA Channel 9 Current X Count Register				*/
+#define DMA9_CURR_Y_COUNT		0xFFC00E78	/* DMA Channel 9 Current Y Count Register				*/
+
+#define DMA10_NEXT_DESC_PTR		0xFFC00E80	/* DMA Channel 10 Next Descriptor Pointer Register		*/
+#define DMA10_START_ADDR		0xFFC00E84	/* DMA Channel 10 Start Address Register				*/
+#define DMA10_CONFIG			0xFFC00E88	/* DMA Channel 10 Configuration Register				*/
+#define DMA10_X_COUNT			0xFFC00E90	/* DMA Channel 10 X Count Register						*/
+#define DMA10_X_MODIFY			0xFFC00E94	/* DMA Channel 10 X Modify Register						*/
+#define DMA10_Y_COUNT			0xFFC00E98	/* DMA Channel 10 Y Count Register						*/
+#define DMA10_Y_MODIFY			0xFFC00E9C	/* DMA Channel 10 Y Modify Register						*/
+#define DMA10_CURR_DESC_PTR		0xFFC00EA0	/* DMA Channel 10 Current Descriptor Pointer Register	*/
+#define DMA10_CURR_ADDR			0xFFC00EA4	/* DMA Channel 10 Current Address Register				*/
+#define DMA10_IRQ_STATUS		0xFFC00EA8	/* DMA Channel 10 Interrupt/Status Register				*/
+#define DMA10_PERIPHERAL_MAP	0xFFC00EAC	/* DMA Channel 10 Peripheral Map Register				*/
+#define DMA10_CURR_X_COUNT		0xFFC00EB0	/* DMA Channel 10 Current X Count Register				*/
+#define DMA10_CURR_Y_COUNT		0xFFC00EB8	/* DMA Channel 10 Current Y Count Register				*/
+
+#define DMA11_NEXT_DESC_PTR		0xFFC00EC0	/* DMA Channel 11 Next Descriptor Pointer Register		*/
+#define DMA11_START_ADDR		0xFFC00EC4	/* DMA Channel 11 Start Address Register				*/
+#define DMA11_CONFIG			0xFFC00EC8	/* DMA Channel 11 Configuration Register				*/
+#define DMA11_X_COUNT			0xFFC00ED0	/* DMA Channel 11 X Count Register						*/
+#define DMA11_X_MODIFY			0xFFC00ED4	/* DMA Channel 11 X Modify Register						*/
+#define DMA11_Y_COUNT			0xFFC00ED8	/* DMA Channel 11 Y Count Register						*/
+#define DMA11_Y_MODIFY			0xFFC00EDC	/* DMA Channel 11 Y Modify Register						*/
+#define DMA11_CURR_DESC_PTR		0xFFC00EE0	/* DMA Channel 11 Current Descriptor Pointer Register	*/
+#define DMA11_CURR_ADDR			0xFFC00EE4	/* DMA Channel 11 Current Address Register				*/
+#define DMA11_IRQ_STATUS		0xFFC00EE8	/* DMA Channel 11 Interrupt/Status Register				*/
+#define DMA11_PERIPHERAL_MAP	0xFFC00EEC	/* DMA Channel 11 Peripheral Map Register				*/
+#define DMA11_CURR_X_COUNT		0xFFC00EF0	/* DMA Channel 11 Current X Count Register				*/
+#define DMA11_CURR_Y_COUNT		0xFFC00EF8	/* DMA Channel 11 Current Y Count Register				*/
+
+#define MDMA_D0_NEXT_DESC_PTR	0xFFC00F00	/* MemDMA Stream 0 Destination Next Descriptor Pointer Register		*/
+#define MDMA_D0_START_ADDR		0xFFC00F04	/* MemDMA Stream 0 Destination Start Address Register				*/
+#define MDMA_D0_CONFIG			0xFFC00F08	/* MemDMA Stream 0 Destination Configuration Register				*/
+#define MDMA_D0_X_COUNT			0xFFC00F10	/* MemDMA Stream 0 Destination X Count Register						*/
+#define MDMA_D0_X_MODIFY		0xFFC00F14	/* MemDMA Stream 0 Destination X Modify Register					*/
+#define MDMA_D0_Y_COUNT			0xFFC00F18	/* MemDMA Stream 0 Destination Y Count Register						*/
+#define MDMA_D0_Y_MODIFY		0xFFC00F1C	/* MemDMA Stream 0 Destination Y Modify Register					*/
+#define MDMA_D0_CURR_DESC_PTR	0xFFC00F20	/* MemDMA Stream 0 Destination Current Descriptor Pointer Register	*/
+#define MDMA_D0_CURR_ADDR		0xFFC00F24	/* MemDMA Stream 0 Destination Current Address Register				*/
+#define MDMA_D0_IRQ_STATUS		0xFFC00F28	/* MemDMA Stream 0 Destination Interrupt/Status Register			*/
+#define MDMA_D0_PERIPHERAL_MAP	0xFFC00F2C	/* MemDMA Stream 0 Destination Peripheral Map Register				*/
+#define MDMA_D0_CURR_X_COUNT	0xFFC00F30	/* MemDMA Stream 0 Destination Current X Count Register				*/
+#define MDMA_D0_CURR_Y_COUNT	0xFFC00F38	/* MemDMA Stream 0 Destination Current Y Count Register				*/
+
+#define MDMA_S0_NEXT_DESC_PTR	0xFFC00F40	/* MemDMA Stream 0 Source Next Descriptor Pointer Register			*/
+#define MDMA_S0_START_ADDR		0xFFC00F44	/* MemDMA Stream 0 Source Start Address Register					*/
+#define MDMA_S0_CONFIG			0xFFC00F48	/* MemDMA Stream 0 Source Configuration Register					*/
+#define MDMA_S0_X_COUNT			0xFFC00F50	/* MemDMA Stream 0 Source X Count Register							*/
+#define MDMA_S0_X_MODIFY		0xFFC00F54	/* MemDMA Stream 0 Source X Modify Register							*/
+#define MDMA_S0_Y_COUNT			0xFFC00F58	/* MemDMA Stream 0 Source Y Count Register							*/
+#define MDMA_S0_Y_MODIFY		0xFFC00F5C	/* MemDMA Stream 0 Source Y Modify Register							*/
+#define MDMA_S0_CURR_DESC_PTR	0xFFC00F60	/* MemDMA Stream 0 Source Current Descriptor Pointer Register		*/
+#define MDMA_S0_CURR_ADDR		0xFFC00F64	/* MemDMA Stream 0 Source Current Address Register					*/
+#define MDMA_S0_IRQ_STATUS		0xFFC00F68	/* MemDMA Stream 0 Source Interrupt/Status Register					*/
+#define MDMA_S0_PERIPHERAL_MAP	0xFFC00F6C	/* MemDMA Stream 0 Source Peripheral Map Register					*/
+#define MDMA_S0_CURR_X_COUNT	0xFFC00F70	/* MemDMA Stream 0 Source Current X Count Register					*/
+#define MDMA_S0_CURR_Y_COUNT	0xFFC00F78	/* MemDMA Stream 0 Source Current Y Count Register					*/
+
+#define MDMA_D1_NEXT_DESC_PTR	0xFFC00F80	/* MemDMA Stream 1 Destination Next Descriptor Pointer Register		*/
+#define MDMA_D1_START_ADDR		0xFFC00F84	/* MemDMA Stream 1 Destination Start Address Register				*/
+#define MDMA_D1_CONFIG			0xFFC00F88	/* MemDMA Stream 1 Destination Configuration Register				*/
+#define MDMA_D1_X_COUNT			0xFFC00F90	/* MemDMA Stream 1 Destination X Count Register						*/
+#define MDMA_D1_X_MODIFY		0xFFC00F94	/* MemDMA Stream 1 Destination X Modify Register					*/
+#define MDMA_D1_Y_COUNT			0xFFC00F98	/* MemDMA Stream 1 Destination Y Count Register						*/
+#define MDMA_D1_Y_MODIFY		0xFFC00F9C	/* MemDMA Stream 1 Destination Y Modify Register					*/
+#define MDMA_D1_CURR_DESC_PTR	0xFFC00FA0	/* MemDMA Stream 1 Destination Current Descriptor Pointer Register	*/
+#define MDMA_D1_CURR_ADDR		0xFFC00FA4	/* MemDMA Stream 1 Destination Current Address Register				*/
+#define MDMA_D1_IRQ_STATUS		0xFFC00FA8	/* MemDMA Stream 1 Destination Interrupt/Status Register			*/
+#define MDMA_D1_PERIPHERAL_MAP	0xFFC00FAC	/* MemDMA Stream 1 Destination Peripheral Map Register				*/
+#define MDMA_D1_CURR_X_COUNT	0xFFC00FB0	/* MemDMA Stream 1 Destination Current X Count Register				*/
+#define MDMA_D1_CURR_Y_COUNT	0xFFC00FB8	/* MemDMA Stream 1 Destination Current Y Count Register				*/
+
+#define MDMA_S1_NEXT_DESC_PTR	0xFFC00FC0	/* MemDMA Stream 1 Source Next Descriptor Pointer Register			*/
+#define MDMA_S1_START_ADDR		0xFFC00FC4	/* MemDMA Stream 1 Source Start Address Register					*/
+#define MDMA_S1_CONFIG			0xFFC00FC8	/* MemDMA Stream 1 Source Configuration Register					*/
+#define MDMA_S1_X_COUNT			0xFFC00FD0	/* MemDMA Stream 1 Source X Count Register							*/
+#define MDMA_S1_X_MODIFY		0xFFC00FD4	/* MemDMA Stream 1 Source X Modify Register							*/
+#define MDMA_S1_Y_COUNT			0xFFC00FD8	/* MemDMA Stream 1 Source Y Count Register							*/
+#define MDMA_S1_Y_MODIFY		0xFFC00FDC	/* MemDMA Stream 1 Source Y Modify Register							*/
+#define MDMA_S1_CURR_DESC_PTR	0xFFC00FE0	/* MemDMA Stream 1 Source Current Descriptor Pointer Register		*/
+#define MDMA_S1_CURR_ADDR		0xFFC00FE4	/* MemDMA Stream 1 Source Current Address Register					*/
+#define MDMA_S1_IRQ_STATUS		0xFFC00FE8	/* MemDMA Stream 1 Source Interrupt/Status Register					*/
+#define MDMA_S1_PERIPHERAL_MAP	0xFFC00FEC	/* MemDMA Stream 1 Source Peripheral Map Register					*/
+#define MDMA_S1_CURR_X_COUNT	0xFFC00FF0	/* MemDMA Stream 1 Source Current X Count Register					*/
+#define MDMA_S1_CURR_Y_COUNT	0xFFC00FF8	/* MemDMA Stream 1 Source Current Y Count Register					*/
+
+
+/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF)				*/
+#define PPI_CONTROL			0xFFC01000	/* PPI Control Register			*/
+#define PPI_STATUS			0xFFC01004	/* PPI Status Register			*/
+#define PPI_COUNT			0xFFC01008	/* PPI Transfer Count Register	*/
+#define PPI_DELAY			0xFFC0100C	/* PPI Delay Count Register		*/
+#define PPI_FRAME			0xFFC01010	/* PPI Frame Length Register	*/
+
+
+/* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF)								*/
+#define TWI0_REGBASE			0xFFC01400
+#define TWI0_CLKDIV			0xFFC01400	/* Serial Clock Divider Register			*/
+#define TWI0_CONTROL			0xFFC01404	/* TWI Control Register						*/
+#define TWI0_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register				*/
+#define TWI0_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register				*/
+#define TWI0_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register				*/
+#define TWI0_MASTER_CTL		0xFFC01414	/* Master Mode Control Register				*/
+#define TWI0_MASTER_STAT		0xFFC01418	/* Master Mode Status Register				*/
+#define TWI0_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register				*/
+#define TWI0_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register			*/
+#define TWI0_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register		*/
+#define TWI0_FIFO_CTL		0xFFC01428	/* FIFO Control Register					*/
+#define TWI0_FIFO_STAT		0xFFC0142C	/* FIFO Status Register						*/
+#define TWI0_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register	*/
+#define TWI0_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register	*/
+#define TWI0_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register	*/
+#define TWI0_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register	*/
+
+
+/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)												*/
+#define PORTGIO					0xFFC01500	/* Port G I/O Pin State Specify Register				*/
+#define PORTGIO_CLEAR			0xFFC01504	/* Port G I/O Peripheral Interrupt Clear Register		*/
+#define PORTGIO_SET				0xFFC01508	/* Port G I/O Peripheral Interrupt Set Register			*/
+#define PORTGIO_TOGGLE			0xFFC0150C	/* Port G I/O Pin State Toggle Register					*/
+#define PORTGIO_MASKA			0xFFC01510	/* Port G I/O Mask State Specify Interrupt A Register	*/
+#define PORTGIO_MASKA_CLEAR		0xFFC01514	/* Port G I/O Mask Disable Interrupt A Register			*/
+#define PORTGIO_MASKA_SET		0xFFC01518	/* Port G I/O Mask Enable Interrupt A Register			*/
+#define PORTGIO_MASKA_TOGGLE	0xFFC0151C	/* Port G I/O Mask Toggle Enable Interrupt A Register	*/
+#define PORTGIO_MASKB			0xFFC01520	/* Port G I/O Mask State Specify Interrupt B Register	*/
+#define PORTGIO_MASKB_CLEAR		0xFFC01524	/* Port G I/O Mask Disable Interrupt B Register			*/
+#define PORTGIO_MASKB_SET		0xFFC01528	/* Port G I/O Mask Enable Interrupt B Register			*/
+#define PORTGIO_MASKB_TOGGLE	0xFFC0152C	/* Port G I/O Mask Toggle Enable Interrupt B Register	*/
+#define PORTGIO_DIR				0xFFC01530	/* Port G I/O Direction Register						*/
+#define PORTGIO_POLAR			0xFFC01534	/* Port G I/O Source Polarity Register					*/
+#define PORTGIO_EDGE			0xFFC01538	/* Port G I/O Source Sensitivity Register				*/
+#define PORTGIO_BOTH			0xFFC0153C	/* Port G I/O Set on BOTH Edges Register				*/
+#define PORTGIO_INEN			0xFFC01540	/* Port G I/O Input Enable Register						*/
+
+
+/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF)												*/
+#define PORTHIO					0xFFC01700	/* Port H I/O Pin State Specify Register				*/
+#define PORTHIO_CLEAR			0xFFC01704	/* Port H I/O Peripheral Interrupt Clear Register		*/
+#define PORTHIO_SET				0xFFC01708	/* Port H I/O Peripheral Interrupt Set Register			*/
+#define PORTHIO_TOGGLE			0xFFC0170C	/* Port H I/O Pin State Toggle Register					*/
+#define PORTHIO_MASKA			0xFFC01710	/* Port H I/O Mask State Specify Interrupt A Register	*/
+#define PORTHIO_MASKA_CLEAR		0xFFC01714	/* Port H I/O Mask Disable Interrupt A Register			*/
+#define PORTHIO_MASKA_SET		0xFFC01718	/* Port H I/O Mask Enable Interrupt A Register			*/
+#define PORTHIO_MASKA_TOGGLE	0xFFC0171C	/* Port H I/O Mask Toggle Enable Interrupt A Register	*/
+#define PORTHIO_MASKB			0xFFC01720	/* Port H I/O Mask State Specify Interrupt B Register	*/
+#define PORTHIO_MASKB_CLEAR		0xFFC01724	/* Port H I/O Mask Disable Interrupt B Register			*/
+#define PORTHIO_MASKB_SET		0xFFC01728	/* Port H I/O Mask Enable Interrupt B Register			*/
+#define PORTHIO_MASKB_TOGGLE	0xFFC0172C	/* Port H I/O Mask Toggle Enable Interrupt B Register	*/
+#define PORTHIO_DIR				0xFFC01730	/* Port H I/O Direction Register						*/
+#define PORTHIO_POLAR			0xFFC01734	/* Port H I/O Source Polarity Register					*/
+#define PORTHIO_EDGE			0xFFC01738	/* Port H I/O Source Sensitivity Register				*/
+#define PORTHIO_BOTH			0xFFC0173C	/* Port H I/O Set on BOTH Edges Register				*/
+#define PORTHIO_INEN			0xFFC01740	/* Port H I/O Input Enable Register						*/
+
+
+/* UART1 Controller		(0xFFC02000 - 0xFFC020FF)								*/
+#define UART1_THR			0xFFC02000	/* Transmit Holding register			*/
+#define UART1_RBR			0xFFC02000	/* Receive Buffer register				*/
+#define UART1_DLL			0xFFC02000	/* Divisor Latch (Low-Byte)				*/
+#define UART1_IER			0xFFC02004	/* Interrupt Enable Register			*/
+#define UART1_DLH			0xFFC02004	/* Divisor Latch (High-Byte)			*/
+#define UART1_IIR			0xFFC02008	/* Interrupt Identification Register	*/
+#define UART1_LCR			0xFFC0200C	/* Line Control Register				*/
+#define UART1_MCR			0xFFC02010	/* Modem Control Register				*/
+#define UART1_LSR			0xFFC02014	/* Line Status Register					*/
+#define UART1_MSR			0xFFC02018	/* Modem Status Register				*/
+#define UART1_SCR			0xFFC0201C	/* SCR Scratch Register					*/
+#define UART1_GCTL			0xFFC02024	/* Global Control Register				*/
+
+
+/* Omit CAN register sets from the defBF534.h (CAN is not in the ADSP-BF52x processor) */
+
+/* Pin Control Registers	(0xFFC03200 - 0xFFC032FF)											*/
+#define PORTF_FER			0xFFC03200	/* Port F Function Enable Register (Alternate/Flag*)	*/
+#define PORTG_FER			0xFFC03204	/* Port G Function Enable Register (Alternate/Flag*)	*/
+#define PORTH_FER			0xFFC03208	/* Port H Function Enable Register (Alternate/Flag*)	*/
+#define BFIN_PORT_MUX			0xFFC0320C	/* Port Multiplexer Control Register					*/
+
+
+/* Handshake MDMA Registers	(0xFFC03300 - 0xFFC033FF)										*/
+#define HMDMA0_CONTROL		0xFFC03300	/* Handshake MDMA0 Control Register					*/
+#define HMDMA0_ECINIT		0xFFC03304	/* HMDMA0 Initial Edge Count Register				*/
+#define HMDMA0_BCINIT		0xFFC03308	/* HMDMA0 Initial Block Count Register				*/
+#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshold Register		*/
+#define HMDMA0_ECOVERFLOW	0xFFC03310	/* HMDMA0 Edge Count Overflow Interrupt Register	*/
+#define HMDMA0_ECOUNT		0xFFC03314	/* HMDMA0 Current Edge Count Register				*/
+#define HMDMA0_BCOUNT		0xFFC03318	/* HMDMA0 Current Block Count Register				*/
+
+#define HMDMA1_CONTROL		0xFFC03340	/* Handshake MDMA1 Control Register					*/
+#define HMDMA1_ECINIT		0xFFC03344	/* HMDMA1 Initial Edge Count Register				*/
+#define HMDMA1_BCINIT		0xFFC03348	/* HMDMA1 Initial Block Count Register				*/
+#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshold Register		*/
+#define HMDMA1_ECOVERFLOW	0xFFC03350	/* HMDMA1 Edge Count Overflow Interrupt Register	*/
+#define HMDMA1_ECOUNT		0xFFC03354	/* HMDMA1 Current Edge Count Register				*/
+#define HMDMA1_BCOUNT		0xFFC03358	/* HMDMA1 Current Block Count Register				*/
+
+/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
+#define PORTF_MUX               0xFFC03210      /* Port F mux control */
+#define PORTG_MUX               0xFFC03214      /* Port G mux control */
+#define PORTH_MUX               0xFFC03218      /* Port H mux control */
+#define PORTF_DRIVE             0xFFC03220      /* Port F drive strength control */
+#define PORTG_DRIVE             0xFFC03224      /* Port G drive strength control */
+#define PORTH_DRIVE             0xFFC03228      /* Port H drive strength control */
+#define PORTF_SLEW              0xFFC03230      /* Port F slew control */
+#define PORTG_SLEW              0xFFC03234      /* Port G slew control */
+#define PORTH_SLEW              0xFFC03238      /* Port H slew control */
+#define PORTF_HYSTERESIS        0xFFC03240      /* Port F Schmitt trigger control */
+#define PORTG_HYSTERESIS        0xFFC03244      /* Port G Schmitt trigger control */
+#define PORTH_HYSTERESIS        0xFFC03248      /* Port H Schmitt trigger control */
+#define MISCPORT_DRIVE          0xFFC03280      /* Misc Port drive strength control */
+#define MISCPORT_SLEW           0xFFC03284      /* Misc Port slew control */
+#define MISCPORT_HYSTERESIS     0xFFC03288      /* Misc Port Schmitt trigger control */
+
+
+/***********************************************************************************
+** System MMR Register Bits And Macros
+**
+** Disclaimer:	All macros are intended to make C and Assembly code more readable.
+**				Use these macros carefully, as any that do left shifts for field
+**				depositing will result in the lower order bits being destroyed.  Any
+**				macro that shifts left to properly position the bit-field should be
+**				used as part of an OR to initialize a register and NOT as a dynamic
+**				modifier UNLESS the lower order bits are saved and ORed back in when
+**				the macro is used.
+*************************************************************************************/
+
+/* CHIPID Masks */
+#define CHIPID_VERSION         0xF0000000
+#define CHIPID_FAMILY          0x0FFFF000
+#define CHIPID_MANUFACTURE     0x00000FFE
+
+/* SWRST Masks																		*/
+#define SYSTEM_RESET		0x0007	/* Initiates A System Software Reset			*/
+#define	DOUBLE_FAULT		0x0008	/* Core Double Fault Causes Reset				*/
+#define RESET_DOUBLE		0x2000	/* SW Reset Generated By Core Double-Fault		*/
+#define RESET_WDOG			0x4000	/* SW Reset Generated By Watchdog Timer			*/
+#define RESET_SOFTWARE		0x8000	/* SW Reset Occurred Since Last Read Of SWRST	*/
+
+/* SYSCR Masks																				*/
+#define BMODE				0x0007	/* Boot Mode - Latched During HW Reset From Mode Pins	*/
+#define	NOBOOT				0x0010	/* Execute From L1 or ASYNC Bank 0 When BMODE = 0		*/
+
+
+/* *************  SYSTEM INTERRUPT CONTROLLER MASKS *************************************/
+/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK										*/
+
+#if 0
+#define IRQ_PLL_WAKEUP	0x00000001	/* PLL Wakeup Interrupt			 					*/
+
+#define IRQ_ERROR1      0x00000002  /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */
+#define IRQ_ERROR2      0x00000004  /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */
+#define IRQ_RTC			0x00000008	/* Real Time Clock Interrupt 						*/
+#define IRQ_DMA0		0x00000010	/* DMA Channel 0 (PPI) Interrupt 					*/
+#define IRQ_DMA3		0x00000020	/* DMA Channel 3 (SPORT0 RX) Interrupt 				*/
+#define IRQ_DMA4		0x00000040	/* DMA Channel 4 (SPORT0 TX) Interrupt 				*/
+#define IRQ_DMA5		0x00000080	/* DMA Channel 5 (SPORT1 RX) Interrupt 				*/
+
+#define IRQ_DMA6		0x00000100	/* DMA Channel 6 (SPORT1 TX) Interrupt 		 		*/
+#define IRQ_TWI			0x00000200	/* TWI Interrupt									*/
+#define IRQ_DMA7		0x00000400	/* DMA Channel 7 (SPI) Interrupt 					*/
+#define IRQ_DMA8		0x00000800	/* DMA Channel 8 (UART0 RX) Interrupt 				*/
+#define IRQ_DMA9		0x00001000	/* DMA Channel 9 (UART0 TX) Interrupt 				*/
+#define IRQ_DMA10		0x00002000	/* DMA Channel 10 (UART1 RX) Interrupt 				*/
+#define IRQ_DMA11		0x00004000	/* DMA Channel 11 (UART1 TX) Interrupt 				*/
+#define IRQ_CAN_RX		0x00008000	/* CAN Receive Interrupt 							*/
+
+#define IRQ_CAN_TX		0x00010000	/* CAN Transmit Interrupt  							*/
+#define IRQ_DMA1		0x00020000	/* DMA Channel 1 (Ethernet RX) Interrupt 			*/
+#define IRQ_PFA_PORTH	0x00020000	/* PF Port H (PF47:32) Interrupt A 					*/
+#define IRQ_DMA2		0x00040000	/* DMA Channel 2 (Ethernet TX) Interrupt 			*/
+#define IRQ_PFB_PORTH	0x00040000	/* PF Port H (PF47:32) Interrupt B 					*/
+#define IRQ_TIMER0		0x00080000	/* Timer 0 Interrupt								*/
+#define IRQ_TIMER1		0x00100000	/* Timer 1 Interrupt 								*/
+#define IRQ_TIMER2		0x00200000	/* Timer 2 Interrupt 								*/
+#define IRQ_TIMER3		0x00400000	/* Timer 3 Interrupt 								*/
+#define IRQ_TIMER4		0x00800000	/* Timer 4 Interrupt 								*/
+
+#define IRQ_TIMER5		0x01000000	/* Timer 5 Interrupt 								*/
+#define IRQ_TIMER6		0x02000000	/* Timer 6 Interrupt 								*/
+#define IRQ_TIMER7		0x04000000	/* Timer 7 Interrupt 								*/
+#define IRQ_PFA_PORTFG	0x08000000	/* PF Ports F&G (PF31:0) Interrupt A 				*/
+#define IRQ_PFB_PORTF	0x80000000	/* PF Port F (PF15:0) Interrupt B 					*/
+#define IRQ_DMA12		0x20000000	/* DMA Channels 12 (MDMA1 Source) RX Interrupt 		*/
+#define IRQ_DMA13		0x20000000	/* DMA Channels 13 (MDMA1 Destination) TX Interrupt */
+#define IRQ_DMA14		0x40000000	/* DMA Channels 14 (MDMA0 Source) RX Interrupt 		*/
+#define IRQ_DMA15		0x40000000	/* DMA Channels 15 (MDMA0 Destination) TX Interrupt */
+#define IRQ_WDOG		0x80000000	/* Software Watchdog Timer Interrupt 				*/
+#define IRQ_PFB_PORTG	0x10000000	/* PF Port G (PF31:16) Interrupt B 					*/
+#endif
+
+/* SIC_IAR0 Macros															*/
+#define P0_IVG(x)		(((x)&0xF)-7)			/* Peripheral #0 assigned IVG #x 	*/
+#define P1_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #1 assigned IVG #x 	*/
+#define P2_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #2 assigned IVG #x 	*/
+#define P3_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #3 assigned IVG #x	*/
+#define P4_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #4 assigned IVG #x	*/
+#define P5_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #5 assigned IVG #x	*/
+#define P6_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #6 assigned IVG #x	*/
+#define P7_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #7 assigned IVG #x	*/
+
+/* SIC_IAR1 Macros															*/
+#define P8_IVG(x)		(((x)&0xF)-7)			/* Peripheral #8 assigned IVG #x 	*/
+#define P9_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #9 assigned IVG #x 	*/
+#define P10_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #10 assigned IVG #x	*/
+#define P11_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #11 assigned IVG #x 	*/
+#define P12_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #12 assigned IVG #x	*/
+#define P13_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #13 assigned IVG #x	*/
+#define P14_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #14 assigned IVG #x	*/
+#define P15_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #15 assigned IVG #x	*/
+
+/* SIC_IAR2 Macros															*/
+#define P16_IVG(x)		(((x)&0xF)-7)			/* Peripheral #16 assigned IVG #x	*/
+#define P17_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #17 assigned IVG #x	*/
+#define P18_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #18 assigned IVG #x	*/
+#define P19_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #19 assigned IVG #x	*/
+#define P20_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #20 assigned IVG #x	*/
+#define P21_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #21 assigned IVG #x	*/
+#define P22_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #22 assigned IVG #x	*/
+#define P23_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #23 assigned IVG #x	*/
+
+/* SIC_IAR3 Macros															*/
+#define P24_IVG(x)		(((x)&0xF)-7)			/* Peripheral #24 assigned IVG #x	*/
+#define P25_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #25 assigned IVG #x	*/
+#define P26_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #26 assigned IVG #x	*/
+#define P27_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #27 assigned IVG #x	*/
+#define P28_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #28 assigned IVG #x	*/
+#define P29_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #29 assigned IVG #x	*/
+#define P30_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #30 assigned IVG #x	*/
+#define P31_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #31 assigned IVG #x	*/
+
+
+/* SIC_IMASK Masks																		*/
+#define SIC_UNMASK_ALL	0x00000000					/* Unmask all peripheral interrupts	*/
+#define SIC_MASK_ALL	0xFFFFFFFF					/* Mask all peripheral interrupts	*/
+#define SIC_MASK(x)		(1 << ((x)&0x1F))					/* Mask Peripheral #x interrupt		*/
+#define SIC_UNMASK(x)	(0xFFFFFFFF ^ (1 << ((x)&0x1F)))	/* Unmask Peripheral #x interrupt	*/
+
+/* SIC_IWR Masks																		*/
+#define IWR_DISABLE_ALL	0x00000000					/* Wakeup Disable all peripherals	*/
+#define IWR_ENABLE_ALL	0xFFFFFFFF					/* Wakeup Enable all peripherals	*/
+#define IWR_ENABLE(x)	(1 << ((x)&0x1F))					/* Wakeup Enable Peripheral #x		*/
+#define IWR_DISABLE(x)	(0xFFFFFFFF ^ (1 << ((x)&0x1F))) 	/* Wakeup Disable Peripheral #x		*/
+
+/*  ****************  GENERAL PURPOSE TIMER MASKS  **********************/
+/* TIMER_ENABLE Masks													*/
+#define TIMEN0			0x0001		/* Enable Timer 0					*/
+#define TIMEN1			0x0002		/* Enable Timer 1					*/
+#define TIMEN2			0x0004		/* Enable Timer 2					*/
+#define TIMEN3			0x0008		/* Enable Timer 3					*/
+#define TIMEN4			0x0010		/* Enable Timer 4					*/
+#define TIMEN5			0x0020		/* Enable Timer 5					*/
+#define TIMEN6			0x0040		/* Enable Timer 6					*/
+#define TIMEN7			0x0080		/* Enable Timer 7					*/
+
+/* TIMER_DISABLE Masks													*/
+#define TIMDIS0			TIMEN0		/* Disable Timer 0					*/
+#define TIMDIS1			TIMEN1		/* Disable Timer 1					*/
+#define TIMDIS2			TIMEN2		/* Disable Timer 2					*/
+#define TIMDIS3			TIMEN3		/* Disable Timer 3					*/
+#define TIMDIS4			TIMEN4		/* Disable Timer 4					*/
+#define TIMDIS5			TIMEN5		/* Disable Timer 5					*/
+#define TIMDIS6			TIMEN6		/* Disable Timer 6					*/
+#define TIMDIS7			TIMEN7		/* Disable Timer 7					*/
+
+/* TIMER_STATUS Masks													*/
+#define TIMIL0			0x00000001	/* Timer 0 Interrupt				*/
+#define TIMIL1			0x00000002	/* Timer 1 Interrupt				*/
+#define TIMIL2			0x00000004	/* Timer 2 Interrupt				*/
+#define TIMIL3			0x00000008	/* Timer 3 Interrupt				*/
+#define TOVF_ERR0		0x00000010	/* Timer 0 Counter Overflow			*/
+#define TOVF_ERR1		0x00000020	/* Timer 1 Counter Overflow			*/
+#define TOVF_ERR2		0x00000040	/* Timer 2 Counter Overflow			*/
+#define TOVF_ERR3		0x00000080	/* Timer 3 Counter Overflow			*/
+#define TRUN0			0x00001000	/* Timer 0 Slave Enable Status		*/
+#define TRUN1			0x00002000	/* Timer 1 Slave Enable Status		*/
+#define TRUN2			0x00004000	/* Timer 2 Slave Enable Status		*/
+#define TRUN3			0x00008000	/* Timer 3 Slave Enable Status		*/
+#define TIMIL4			0x00010000	/* Timer 4 Interrupt				*/
+#define TIMIL5			0x00020000	/* Timer 5 Interrupt				*/
+#define TIMIL6			0x00040000	/* Timer 6 Interrupt				*/
+#define TIMIL7			0x00080000	/* Timer 7 Interrupt				*/
+#define TOVF_ERR4		0x00100000	/* Timer 4 Counter Overflow			*/
+#define TOVF_ERR5		0x00200000	/* Timer 5 Counter Overflow			*/
+#define TOVF_ERR6		0x00400000	/* Timer 6 Counter Overflow			*/
+#define TOVF_ERR7		0x00800000	/* Timer 7 Counter Overflow			*/
+#define TRUN4			0x10000000	/* Timer 4 Slave Enable Status		*/
+#define TRUN5			0x20000000	/* Timer 5 Slave Enable Status		*/
+#define TRUN6			0x40000000	/* Timer 6 Slave Enable Status		*/
+#define TRUN7			0x80000000	/* Timer 7 Slave Enable Status		*/
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define TOVL_ERR0 TOVF_ERR0
+#define TOVL_ERR1 TOVF_ERR1
+#define TOVL_ERR2 TOVF_ERR2
+#define TOVL_ERR3 TOVF_ERR3
+#define TOVL_ERR4 TOVF_ERR4
+#define TOVL_ERR5 TOVF_ERR5
+#define TOVL_ERR6 TOVF_ERR6
+#define TOVL_ERR7 TOVF_ERR7
+
+/* TIMERx_CONFIG Masks													*/
+#define PWM_OUT			0x0001	/* Pulse-Width Modulation Output Mode	*/
+#define WDTH_CAP		0x0002	/* Width Capture Input Mode				*/
+#define EXT_CLK			0x0003	/* External Clock Mode					*/
+#define PULSE_HI		0x0004	/* Action Pulse (Positive/Negative*)	*/
+#define PERIOD_CNT		0x0008	/* Period Count							*/
+#define IRQ_ENA			0x0010	/* Interrupt Request Enable				*/
+#define TIN_SEL			0x0020	/* Timer Input Select					*/
+#define OUT_DIS			0x0040	/* Output Pad Disable					*/
+#define CLK_SEL			0x0080	/* Timer Clock Select					*/
+#define TOGGLE_HI		0x0100	/* PWM_OUT PULSE_HI Toggle Mode			*/
+#define EMU_RUN			0x0200	/* Emulation Behavior Select			*/
+#define ERR_TYP			0xC000	/* Error Type							*/
+
+/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  *************************/
+/* EBIU_AMGCTL Masks																	*/
+#define AMCKEN			0x0001		/* Enable CLKOUT									*/
+#define	AMBEN_NONE		0x0000		/* All Banks Disabled								*/
+#define AMBEN_B0		0x0002		/* Enable Async Memory Bank 0 only					*/
+#define AMBEN_B0_B1		0x0004		/* Enable Async Memory Banks 0 & 1 only				*/
+#define AMBEN_B0_B1_B2	0x0006		/* Enable Async Memory Banks 0, 1, and 2			*/
+#define AMBEN_ALL		0x0008		/* Enable Async Memory Banks (all) 0, 1, 2, and 3	*/
+
+/* EBIU_AMBCTL0 Masks																	*/
+#define B0RDYEN			0x00000001  /* Bank 0 (B0) RDY Enable							*/
+#define B0RDYPOL		0x00000002  /* B0 RDY Active High								*/
+#define B0TT_1			0x00000004  /* B0 Transition Time (Read to Write) = 1 cycle		*/
+#define B0TT_2			0x00000008  /* B0 Transition Time (Read to Write) = 2 cycles	*/
+#define B0TT_3			0x0000000C  /* B0 Transition Time (Read to Write) = 3 cycles	*/
+#define B0TT_4			0x00000000  /* B0 Transition Time (Read to Write) = 4 cycles	*/
+#define B0ST_1			0x00000010  /* B0 Setup Time (AOE to Read/Write) = 1 cycle		*/
+#define B0ST_2			0x00000020  /* B0 Setup Time (AOE to Read/Write) = 2 cycles		*/
+#define B0ST_3			0x00000030  /* B0 Setup Time (AOE to Read/Write) = 3 cycles		*/
+#define B0ST_4			0x00000000  /* B0 Setup Time (AOE to Read/Write) = 4 cycles		*/
+#define B0HT_1			0x00000040  /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle		*/
+#define B0HT_2			0x00000080  /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles	*/
+#define B0HT_3			0x000000C0  /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles	*/
+#define B0HT_0			0x00000000  /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles	*/
+#define B0RAT_1			0x00000100  /* B0 Read Access Time = 1 cycle					*/
+#define B0RAT_2			0x00000200  /* B0 Read Access Time = 2 cycles					*/
+#define B0RAT_3			0x00000300  /* B0 Read Access Time = 3 cycles					*/
+#define B0RAT_4			0x00000400  /* B0 Read Access Time = 4 cycles					*/
+#define B0RAT_5			0x00000500  /* B0 Read Access Time = 5 cycles					*/
+#define B0RAT_6			0x00000600  /* B0 Read Access Time = 6 cycles					*/
+#define B0RAT_7			0x00000700  /* B0 Read Access Time = 7 cycles					*/
+#define B0RAT_8			0x00000800  /* B0 Read Access Time = 8 cycles					*/
+#define B0RAT_9			0x00000900  /* B0 Read Access Time = 9 cycles					*/
+#define B0RAT_10		0x00000A00  /* B0 Read Access Time = 10 cycles					*/
+#define B0RAT_11		0x00000B00  /* B0 Read Access Time = 11 cycles					*/
+#define B0RAT_12		0x00000C00  /* B0 Read Access Time = 12 cycles					*/
+#define B0RAT_13		0x00000D00  /* B0 Read Access Time = 13 cycles					*/
+#define B0RAT_14		0x00000E00  /* B0 Read Access Time = 14 cycles					*/
+#define B0RAT_15		0x00000F00  /* B0 Read Access Time = 15 cycles					*/
+#define B0WAT_1			0x00001000  /* B0 Write Access Time = 1 cycle					*/
+#define B0WAT_2			0x00002000  /* B0 Write Access Time = 2 cycles					*/
+#define B0WAT_3			0x00003000  /* B0 Write Access Time = 3 cycles					*/
+#define B0WAT_4			0x00004000  /* B0 Write Access Time = 4 cycles					*/
+#define B0WAT_5			0x00005000  /* B0 Write Access Time = 5 cycles					*/
+#define B0WAT_6			0x00006000  /* B0 Write Access Time = 6 cycles					*/
+#define B0WAT_7			0x00007000  /* B0 Write Access Time = 7 cycles					*/
+#define B0WAT_8			0x00008000  /* B0 Write Access Time = 8 cycles					*/
+#define B0WAT_9			0x00009000  /* B0 Write Access Time = 9 cycles					*/
+#define B0WAT_10		0x0000A000  /* B0 Write Access Time = 10 cycles					*/
+#define B0WAT_11		0x0000B000  /* B0 Write Access Time = 11 cycles					*/
+#define B0WAT_12		0x0000C000  /* B0 Write Access Time = 12 cycles					*/
+#define B0WAT_13		0x0000D000  /* B0 Write Access Time = 13 cycles					*/
+#define B0WAT_14		0x0000E000  /* B0 Write Access Time = 14 cycles					*/
+#define B0WAT_15		0x0000F000  /* B0 Write Access Time = 15 cycles					*/
+
+#define B1RDYEN			0x00010000  /* Bank 1 (B1) RDY Enable                       	*/
+#define B1RDYPOL		0x00020000  /* B1 RDY Active High                           	*/
+#define B1TT_1			0x00040000  /* B1 Transition Time (Read to Write) = 1 cycle 	*/
+#define B1TT_2			0x00080000  /* B1 Transition Time (Read to Write) = 2 cycles	*/
+#define B1TT_3			0x000C0000  /* B1 Transition Time (Read to Write) = 3 cycles	*/
+#define B1TT_4			0x00000000  /* B1 Transition Time (Read to Write) = 4 cycles	*/
+#define B1ST_1			0x00100000  /* B1 Setup Time (AOE to Read/Write) = 1 cycle  	*/
+#define B1ST_2			0x00200000  /* B1 Setup Time (AOE to Read/Write) = 2 cycles 	*/
+#define B1ST_3			0x00300000  /* B1 Setup Time (AOE to Read/Write) = 3 cycles 	*/
+#define B1ST_4			0x00000000  /* B1 Setup Time (AOE to Read/Write) = 4 cycles 	*/
+#define B1HT_1			0x00400000  /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle 	*/
+#define B1HT_2			0x00800000  /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles	*/
+#define B1HT_3			0x00C00000  /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles	*/
+#define B1HT_0			0x00000000  /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles	*/
+#define B1RAT_1			0x01000000  /* B1 Read Access Time = 1 cycle					*/
+#define B1RAT_2			0x02000000  /* B1 Read Access Time = 2 cycles					*/
+#define B1RAT_3			0x03000000  /* B1 Read Access Time = 3 cycles					*/
+#define B1RAT_4			0x04000000  /* B1 Read Access Time = 4 cycles					*/
+#define B1RAT_5			0x05000000  /* B1 Read Access Time = 5 cycles					*/
+#define B1RAT_6			0x06000000  /* B1 Read Access Time = 6 cycles					*/
+#define B1RAT_7			0x07000000  /* B1 Read Access Time = 7 cycles					*/
+#define B1RAT_8			0x08000000  /* B1 Read Access Time = 8 cycles					*/
+#define B1RAT_9			0x09000000  /* B1 Read Access Time = 9 cycles					*/
+#define B1RAT_10		0x0A000000  /* B1 Read Access Time = 10 cycles					*/
+#define B1RAT_11		0x0B000000  /* B1 Read Access Time = 11 cycles					*/
+#define B1RAT_12		0x0C000000  /* B1 Read Access Time = 12 cycles					*/
+#define B1RAT_13		0x0D000000  /* B1 Read Access Time = 13 cycles					*/
+#define B1RAT_14		0x0E000000  /* B1 Read Access Time = 14 cycles					*/
+#define B1RAT_15		0x0F000000  /* B1 Read Access Time = 15 cycles					*/
+#define B1WAT_1			0x10000000  /* B1 Write Access Time = 1 cycle					*/
+#define B1WAT_2			0x20000000  /* B1 Write Access Time = 2 cycles					*/
+#define B1WAT_3			0x30000000  /* B1 Write Access Time = 3 cycles					*/
+#define B1WAT_4			0x40000000  /* B1 Write Access Time = 4 cycles					*/
+#define B1WAT_5			0x50000000  /* B1 Write Access Time = 5 cycles					*/
+#define B1WAT_6			0x60000000  /* B1 Write Access Time = 6 cycles					*/
+#define B1WAT_7			0x70000000  /* B1 Write Access Time = 7 cycles					*/
+#define B1WAT_8			0x80000000  /* B1 Write Access Time = 8 cycles					*/
+#define B1WAT_9			0x90000000  /* B1 Write Access Time = 9 cycles					*/
+#define B1WAT_10		0xA0000000  /* B1 Write Access Time = 10 cycles					*/
+#define B1WAT_11		0xB0000000  /* B1 Write Access Time = 11 cycles					*/
+#define B1WAT_12		0xC0000000  /* B1 Write Access Time = 12 cycles					*/
+#define B1WAT_13		0xD0000000  /* B1 Write Access Time = 13 cycles					*/
+#define B1WAT_14		0xE0000000  /* B1 Write Access Time = 14 cycles					*/
+#define B1WAT_15		0xF0000000  /* B1 Write Access Time = 15 cycles					*/
+
+/* EBIU_AMBCTL1 Masks																	*/
+#define B2RDYEN			0x00000001  /* Bank 2 (B2) RDY Enable							*/
+#define B2RDYPOL		0x00000002  /* B2 RDY Active High								*/
+#define B2TT_1			0x00000004  /* B2 Transition Time (Read to Write) = 1 cycle		*/
+#define B2TT_2			0x00000008  /* B2 Transition Time (Read to Write) = 2 cycles	*/
+#define B2TT_3			0x0000000C  /* B2 Transition Time (Read to Write) = 3 cycles	*/
+#define B2TT_4			0x00000000  /* B2 Transition Time (Read to Write) = 4 cycles	*/
+#define B2ST_1			0x00000010  /* B2 Setup Time (AOE to Read/Write) = 1 cycle		*/
+#define B2ST_2			0x00000020  /* B2 Setup Time (AOE to Read/Write) = 2 cycles		*/
+#define B2ST_3			0x00000030  /* B2 Setup Time (AOE to Read/Write) = 3 cycles		*/
+#define B2ST_4			0x00000000  /* B2 Setup Time (AOE to Read/Write) = 4 cycles		*/
+#define B2HT_1			0x00000040  /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle		*/
+#define B2HT_2			0x00000080  /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles	*/
+#define B2HT_3			0x000000C0  /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles	*/
+#define B2HT_0			0x00000000  /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles	*/
+#define B2RAT_1			0x00000100  /* B2 Read Access Time = 1 cycle					*/
+#define B2RAT_2			0x00000200  /* B2 Read Access Time = 2 cycles					*/
+#define B2RAT_3			0x00000300  /* B2 Read Access Time = 3 cycles					*/
+#define B2RAT_4			0x00000400  /* B2 Read Access Time = 4 cycles					*/
+#define B2RAT_5			0x00000500  /* B2 Read Access Time = 5 cycles					*/
+#define B2RAT_6			0x00000600  /* B2 Read Access Time = 6 cycles					*/
+#define B2RAT_7			0x00000700  /* B2 Read Access Time = 7 cycles					*/
+#define B2RAT_8			0x00000800  /* B2 Read Access Time = 8 cycles					*/
+#define B2RAT_9			0x00000900  /* B2 Read Access Time = 9 cycles					*/
+#define B2RAT_10		0x00000A00  /* B2 Read Access Time = 10 cycles					*/
+#define B2RAT_11		0x00000B00  /* B2 Read Access Time = 11 cycles					*/
+#define B2RAT_12		0x00000C00  /* B2 Read Access Time = 12 cycles					*/
+#define B2RAT_13		0x00000D00  /* B2 Read Access Time = 13 cycles					*/
+#define B2RAT_14		0x00000E00  /* B2 Read Access Time = 14 cycles					*/
+#define B2RAT_15		0x00000F00  /* B2 Read Access Time = 15 cycles					*/
+#define B2WAT_1			0x00001000  /* B2 Write Access Time = 1 cycle					*/
+#define B2WAT_2			0x00002000  /* B2 Write Access Time = 2 cycles					*/
+#define B2WAT_3			0x00003000  /* B2 Write Access Time = 3 cycles					*/
+#define B2WAT_4			0x00004000  /* B2 Write Access Time = 4 cycles					*/
+#define B2WAT_5			0x00005000  /* B2 Write Access Time = 5 cycles					*/
+#define B2WAT_6			0x00006000  /* B2 Write Access Time = 6 cycles					*/
+#define B2WAT_7			0x00007000  /* B2 Write Access Time = 7 cycles					*/
+#define B2WAT_8			0x00008000  /* B2 Write Access Time = 8 cycles					*/
+#define B2WAT_9			0x00009000  /* B2 Write Access Time = 9 cycles					*/
+#define B2WAT_10		0x0000A000  /* B2 Write Access Time = 10 cycles					*/
+#define B2WAT_11		0x0000B000  /* B2 Write Access Time = 11 cycles					*/
+#define B2WAT_12		0x0000C000  /* B2 Write Access Time = 12 cycles					*/
+#define B2WAT_13		0x0000D000  /* B2 Write Access Time = 13 cycles					*/
+#define B2WAT_14		0x0000E000  /* B2 Write Access Time = 14 cycles					*/
+#define B2WAT_15		0x0000F000  /* B2 Write Access Time = 15 cycles					*/
+
+#define B3RDYEN			0x00010000  /* Bank 3 (B3) RDY Enable							*/
+#define B3RDYPOL		0x00020000  /* B3 RDY Active High								*/
+#define B3TT_1			0x00040000  /* B3 Transition Time (Read to Write) = 1 cycle		*/
+#define B3TT_2			0x00080000  /* B3 Transition Time (Read to Write) = 2 cycles	*/
+#define B3TT_3			0x000C0000  /* B3 Transition Time (Read to Write) = 3 cycles	*/
+#define B3TT_4			0x00000000  /* B3 Transition Time (Read to Write) = 4 cycles	*/
+#define B3ST_1			0x00100000  /* B3 Setup Time (AOE to Read/Write) = 1 cycle		*/
+#define B3ST_2			0x00200000  /* B3 Setup Time (AOE to Read/Write) = 2 cycles		*/
+#define B3ST_3			0x00300000  /* B3 Setup Time (AOE to Read/Write) = 3 cycles		*/
+#define B3ST_4			0x00000000  /* B3 Setup Time (AOE to Read/Write) = 4 cycles		*/
+#define B3HT_1			0x00400000  /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle		*/
+#define B3HT_2			0x00800000  /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles	*/
+#define B3HT_3			0x00C00000  /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles	*/
+#define B3HT_0			0x00000000  /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles	*/
+#define B3RAT_1			0x01000000  /* B3 Read Access Time = 1 cycle					*/
+#define B3RAT_2			0x02000000  /* B3 Read Access Time = 2 cycles					*/
+#define B3RAT_3			0x03000000  /* B3 Read Access Time = 3 cycles					*/
+#define B3RAT_4			0x04000000  /* B3 Read Access Time = 4 cycles					*/
+#define B3RAT_5			0x05000000  /* B3 Read Access Time = 5 cycles					*/
+#define B3RAT_6			0x06000000  /* B3 Read Access Time = 6 cycles					*/
+#define B3RAT_7			0x07000000  /* B3 Read Access Time = 7 cycles					*/
+#define B3RAT_8			0x08000000  /* B3 Read Access Time = 8 cycles					*/
+#define B3RAT_9			0x09000000  /* B3 Read Access Time = 9 cycles					*/
+#define B3RAT_10		0x0A000000  /* B3 Read Access Time = 10 cycles					*/
+#define B3RAT_11		0x0B000000  /* B3 Read Access Time = 11 cycles					*/
+#define B3RAT_12		0x0C000000  /* B3 Read Access Time = 12 cycles					*/
+#define B3RAT_13		0x0D000000  /* B3 Read Access Time = 13 cycles					*/
+#define B3RAT_14		0x0E000000  /* B3 Read Access Time = 14 cycles					*/
+#define B3RAT_15		0x0F000000  /* B3 Read Access Time = 15 cycles					*/
+#define B3WAT_1			0x10000000  /* B3 Write Access Time = 1 cycle					*/
+#define B3WAT_2			0x20000000  /* B3 Write Access Time = 2 cycles					*/
+#define B3WAT_3			0x30000000  /* B3 Write Access Time = 3 cycles					*/
+#define B3WAT_4			0x40000000  /* B3 Write Access Time = 4 cycles					*/
+#define B3WAT_5			0x50000000  /* B3 Write Access Time = 5 cycles					*/
+#define B3WAT_6			0x60000000  /* B3 Write Access Time = 6 cycles					*/
+#define B3WAT_7			0x70000000  /* B3 Write Access Time = 7 cycles					*/
+#define B3WAT_8			0x80000000  /* B3 Write Access Time = 8 cycles					*/
+#define B3WAT_9			0x90000000  /* B3 Write Access Time = 9 cycles					*/
+#define B3WAT_10		0xA0000000  /* B3 Write Access Time = 10 cycles					*/
+#define B3WAT_11		0xB0000000  /* B3 Write Access Time = 11 cycles					*/
+#define B3WAT_12		0xC0000000  /* B3 Write Access Time = 12 cycles					*/
+#define B3WAT_13		0xD0000000  /* B3 Write Access Time = 13 cycles					*/
+#define B3WAT_14		0xE0000000  /* B3 Write Access Time = 14 cycles					*/
+#define B3WAT_15		0xF0000000  /* B3 Write Access Time = 15 cycles					*/
+
+
+/* **********************  SDRAM CONTROLLER MASKS  **********************************************/
+/* EBIU_SDGCTL Masks																			*/
+#define SCTLE			0x00000001	/* Enable SDRAM Signals										*/
+#define CL_2			0x00000008	/* SDRAM CAS Latency = 2 cycles								*/
+#define CL_3			0x0000000C	/* SDRAM CAS Latency = 3 cycles								*/
+#define PASR_ALL		0x00000000	/* All 4 SDRAM Banks Refreshed In Self-Refresh				*/
+#define PASR_B0_B1		0x00000010	/* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh		*/
+#define PASR_B0			0x00000020	/* Only SDRAM Bank 0 Is Refreshed In Self-Refresh			*/
+#define TRAS_1			0x00000040	/* SDRAM tRAS = 1 cycle										*/
+#define TRAS_2			0x00000080	/* SDRAM tRAS = 2 cycles									*/
+#define TRAS_3			0x000000C0	/* SDRAM tRAS = 3 cycles									*/
+#define TRAS_4			0x00000100	/* SDRAM tRAS = 4 cycles									*/
+#define TRAS_5			0x00000140	/* SDRAM tRAS = 5 cycles									*/
+#define TRAS_6			0x00000180	/* SDRAM tRAS = 6 cycles									*/
+#define TRAS_7			0x000001C0	/* SDRAM tRAS = 7 cycles									*/
+#define TRAS_8			0x00000200	/* SDRAM tRAS = 8 cycles									*/
+#define TRAS_9			0x00000240	/* SDRAM tRAS = 9 cycles									*/
+#define TRAS_10			0x00000280	/* SDRAM tRAS = 10 cycles									*/
+#define TRAS_11			0x000002C0	/* SDRAM tRAS = 11 cycles									*/
+#define TRAS_12			0x00000300	/* SDRAM tRAS = 12 cycles									*/
+#define TRAS_13			0x00000340	/* SDRAM tRAS = 13 cycles									*/
+#define TRAS_14			0x00000380	/* SDRAM tRAS = 14 cycles									*/
+#define TRAS_15			0x000003C0	/* SDRAM tRAS = 15 cycles									*/
+#define TRP_1			0x00000800	/* SDRAM tRP = 1 cycle										*/
+#define TRP_2			0x00001000	/* SDRAM tRP = 2 cycles										*/
+#define TRP_3			0x00001800	/* SDRAM tRP = 3 cycles										*/
+#define TRP_4			0x00002000	/* SDRAM tRP = 4 cycles										*/
+#define TRP_5			0x00002800	/* SDRAM tRP = 5 cycles										*/
+#define TRP_6			0x00003000	/* SDRAM tRP = 6 cycles										*/
+#define TRP_7			0x00003800	/* SDRAM tRP = 7 cycles										*/
+#define TRCD_1			0x00008000	/* SDRAM tRCD = 1 cycle										*/
+#define TRCD_2			0x00010000	/* SDRAM tRCD = 2 cycles									*/
+#define TRCD_3			0x00018000	/* SDRAM tRCD = 3 cycles									*/
+#define TRCD_4			0x00020000	/* SDRAM tRCD = 4 cycles									*/
+#define TRCD_5			0x00028000	/* SDRAM tRCD = 5 cycles									*/
+#define TRCD_6			0x00030000	/* SDRAM tRCD = 6 cycles									*/
+#define TRCD_7			0x00038000	/* SDRAM tRCD = 7 cycles									*/
+#define TWR_1			0x00080000	/* SDRAM tWR = 1 cycle										*/
+#define TWR_2			0x00100000	/* SDRAM tWR = 2 cycles										*/
+#define TWR_3			0x00180000	/* SDRAM tWR = 3 cycles										*/
+#define PUPSD			0x00200000	/* Power-Up Start Delay (15 SCLK Cycles Delay)				*/
+#define PSM				0x00400000	/* Power-Up Sequence (Mode Register Before/After* Refresh)	*/
+#define PSS				0x00800000	/* Enable Power-Up Sequence on Next SDRAM Access			*/
+#define SRFS			0x01000000	/* Enable SDRAM Self-Refresh Mode							*/
+#define EBUFE			0x02000000	/* Enable External Buffering Timing							*/
+#define FBBRW			0x04000000	/* Enable Fast Back-To-Back Read To Write					*/
+#define EMREN			0x10000000	/* Extended Mode Register Enable							*/
+#define TCSR			0x20000000	/* Temp-Compensated Self-Refresh Value (85/45* Deg C)		*/
+#define CDDBG			0x40000000	/* Tristate SDRAM Controls During Bus Grant					*/
+
+/* EBIU_SDBCTL Masks																		*/
+#define EBE				0x0001		/* Enable SDRAM External Bank							*/
+#define EBSZ_16			0x0000		/* SDRAM External Bank Size = 16MB	*/
+#define EBSZ_32			0x0002		/* SDRAM External Bank Size = 32MB	*/
+#define EBSZ_64			0x0004		/* SDRAM External Bank Size = 64MB	*/
+#define EBSZ_128		0x0006		/* SDRAM External Bank Size = 128MB		*/
+#define EBSZ_256		0x0008		/* SDRAM External Bank Size = 256MB 	*/
+#define EBSZ_512		0x000A		/* SDRAM External Bank Size = 512MB		*/
+#define EBCAW_8			0x0000		/* SDRAM External Bank Column Address Width = 8 Bits	*/
+#define EBCAW_9			0x0010		/* SDRAM External Bank Column Address Width = 9 Bits	*/
+#define EBCAW_10		0x0020		/* SDRAM External Bank Column Address Width = 10 Bits	*/
+#define EBCAW_11		0x0030		/* SDRAM External Bank Column Address Width = 11 Bits	*/
+
+/* EBIU_SDSTAT Masks														*/
+#define SDCI			0x0001		/* SDRAM Controller Idle 				*/
+#define SDSRA			0x0002		/* SDRAM Self-Refresh Active			*/
+#define SDPUA			0x0004		/* SDRAM Power-Up Active 				*/
+#define SDRS			0x0008		/* SDRAM Will Power-Up On Next Access	*/
+#define SDEASE			0x0010		/* SDRAM EAB Sticky Error Status		*/
+#define BGSTAT			0x0020		/* Bus Grant Status						*/
+
+
+/* **************************  DMA CONTROLLER MASKS  ********************************/
+
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks								*/
+#define CTYPE			0x0040	/* DMA Channel Type Indicator (Memory/Peripheral*)	*/
+#define PMAP			0xF000	/* Peripheral Mapped To This Channel				*/
+#define PMAP_PPI		0x0000	/* 		PPI Port DMA								*/
+#define	PMAP_EMACRX		0x1000	/* 		Ethernet Receive DMA						*/
+#define PMAP_EMACTX		0x2000	/* 		Ethernet Transmit DMA						*/
+#define PMAP_SPORT0RX	0x3000	/* 		SPORT0 Receive DMA							*/
+#define PMAP_SPORT0TX	0x4000	/* 		SPORT0 Transmit DMA							*/
+#define PMAP_SPORT1RX	0x5000	/* 		SPORT1 Receive DMA							*/
+#define PMAP_SPORT1TX	0x6000	/* 		SPORT1 Transmit DMA							*/
+#define PMAP_SPI		0x7000	/* 		SPI Port DMA								*/
+#define PMAP_UART0RX	0x8000	/* 		UART0 Port Receive DMA						*/
+#define PMAP_UART0TX	0x9000	/* 		UART0 Port Transmit DMA						*/
+#define	PMAP_UART1RX	0xA000	/* 		UART1 Port Receive DMA						*/
+#define	PMAP_UART1TX	0xB000	/* 		UART1 Port Transmit DMA						*/
+
+/*  ************  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
+/*  PPI_CONTROL Masks													*/
+#define PORT_EN			0x0001		/* PPI Port Enable					*/
+#define PORT_DIR		0x0002		/* PPI Port Direction				*/
+#define XFR_TYPE		0x000C		/* PPI Transfer Type				*/
+#define PORT_CFG		0x0030		/* PPI Port Configuration			*/
+#define FLD_SEL			0x0040		/* PPI Active Field Select			*/
+#define PACK_EN			0x0080		/* PPI Packing Mode					*/
+#define DMA32			0x0100		/* PPI 32-bit DMA Enable			*/
+#define SKIP_EN			0x0200		/* PPI Skip Element Enable			*/
+#define SKIP_EO			0x0400		/* PPI Skip Even/Odd Elements		*/
+#define DLEN_8			0x0000		/* Data Length = 8 Bits				*/
+#define DLEN_10			0x0800		/* Data Length = 10 Bits			*/
+#define DLEN_11			0x1000		/* Data Length = 11 Bits			*/
+#define DLEN_12			0x1800		/* Data Length = 12 Bits			*/
+#define DLEN_13			0x2000		/* Data Length = 13 Bits			*/
+#define DLEN_14			0x2800		/* Data Length = 14 Bits			*/
+#define DLEN_15			0x3000		/* Data Length = 15 Bits			*/
+#define DLEN_16			0x3800		/* Data Length = 16 Bits			*/
+#define DLENGTH			0x3800		/* PPI Data Length  */
+#define POLC			0x4000		/* PPI Clock Polarity				*/
+#define POLS			0x8000		/* PPI Frame Sync Polarity			*/
+
+/* PPI_STATUS Masks														*/
+#define FLD				0x0400		/* Field Indicator					*/
+#define FT_ERR			0x0800		/* Frame Track Error				*/
+#define OVR				0x1000		/* FIFO Overflow Error				*/
+#define UNDR			0x2000		/* FIFO Underrun Error				*/
+#define ERR_DET			0x4000		/* Error Detected Indicator			*/
+#define ERR_NCOR		0x8000		/* Error Not Corrected Indicator	*/
+
+
+/* Omit CAN masks from defBF534.h */
+
+/*  *******************  PIN CONTROL REGISTER MASKS  ************************/
+/* PORT_MUX Masks															*/
+#define	PJSE			0x0001			/* Port J SPI/SPORT Enable			*/
+#define	PJSE_SPORT		0x0000			/* 		Enable TFS0/DT0PRI			*/
+#define	PJSE_SPI		0x0001			/* 		Enable SPI_SSEL3:2			*/
+
+#define	PJCE(x)			(((x)&0x3)<<1)	/* Port J CAN/SPI/SPORT Enable		*/
+#define	PJCE_SPORT		0x0000			/* 		Enable DR0SEC/DT0SEC		*/
+#define	PJCE_CAN		0x0002			/* 		Enable CAN RX/TX			*/
+#define	PJCE_SPI		0x0004			/* 		Enable SPI_SSEL7			*/
+
+#define	PFDE			0x0008			/* Port F DMA Request Enable		*/
+#define	PFDE_UART		0x0000			/* 		Enable UART0 RX/TX			*/
+#define	PFDE_DMA		0x0008			/* 		Enable DMAR1:0				*/
+
+#define	PFTE			0x0010			/* Port F Timer Enable				*/
+#define	PFTE_UART		0x0000			/*		Enable UART1 RX/TX			*/
+#define	PFTE_TIMER		0x0010			/* 		Enable TMR7:6				*/
+
+#define	PFS6E			0x0020			/* Port F SPI SSEL 6 Enable			*/
+#define	PFS6E_TIMER		0x0000			/*		Enable TMR5					*/
+#define	PFS6E_SPI		0x0020			/* 		Enable SPI_SSEL6			*/
+
+#define	PFS5E			0x0040			/* Port F SPI SSEL 5 Enable			*/
+#define	PFS5E_TIMER		0x0000			/*		Enable TMR4					*/
+#define	PFS5E_SPI		0x0040			/* 		Enable SPI_SSEL5			*/
+
+#define	PFS4E			0x0080			/* Port F SPI SSEL 4 Enable			*/
+#define	PFS4E_TIMER		0x0000			/*		Enable TMR3					*/
+#define	PFS4E_SPI		0x0080			/* 		Enable SPI_SSEL4			*/
+
+#define	PFFE			0x0100			/* Port F PPI Frame Sync Enable		*/
+#define	PFFE_TIMER		0x0000			/* 		Enable TMR2					*/
+#define	PFFE_PPI		0x0100			/* 		Enable PPI FS3				*/
+
+#define	PGSE			0x0200			/* Port G SPORT1 Secondary Enable	*/
+#define	PGSE_PPI		0x0000			/* 		Enable PPI D9:8				*/
+#define	PGSE_SPORT		0x0200			/* 		Enable DR1SEC/DT1SEC		*/
+
+#define	PGRE			0x0400			/* Port G SPORT1 Receive Enable		*/
+#define	PGRE_PPI		0x0000			/* 		Enable PPI D12:10			*/
+#define	PGRE_SPORT		0x0400			/* 		Enable DR1PRI/RFS1/RSCLK1	*/
+
+#define	PGTE			0x0800			/* Port G SPORT1 Transmit Enable	*/
+#define	PGTE_PPI		0x0000			/* 		Enable PPI D15:13			*/
+#define	PGTE_SPORT		0x0800			/* 		Enable DT1PRI/TFS1/TSCLK1	*/
+
+/* entry addresses of the user-callable Boot ROM functions */
+
+#define _BOOTROM_RESET 0xEF000000
+#define _BOOTROM_FINAL_INIT 0xEF000002
+#define _BOOTROM_DO_MEMORY_DMA 0xEF000006
+#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
+#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
+#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
+#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
+#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
+#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define	PGDE_UART   PFDE_UART
+#define	PGDE_DMA    PFDE_DMA
+#define	CKELOW		SCKELOW
+
+/* ==== end from defBF534.h ==== */
+
+/* HOST Port Registers */
+
+#define                     HOST_CONTROL  0xffc03400   /* HOST Control Register */
+#define                      HOST_STATUS  0xffc03404   /* HOST Status Register */
+#define                     HOST_TIMEOUT  0xffc03408   /* HOST Acknowledge Mode Timeout Register */
+
+/* Counter Registers */
+
+#define                       CNT_CONFIG  0xffc03500   /* Configuration Register */
+#define                        CNT_IMASK  0xffc03504   /* Interrupt Mask Register */
+#define                       CNT_STATUS  0xffc03508   /* Status Register */
+#define                      CNT_COMMAND  0xffc0350c   /* Command Register */
+#define                     CNT_DEBOUNCE  0xffc03510   /* Debounce Register */
+#define                      CNT_COUNTER  0xffc03514   /* Counter Register */
+#define                          CNT_MAX  0xffc03518   /* Maximal Count Register */
+#define                          CNT_MIN  0xffc0351c   /* Minimal Count Register */
+
+/* OTP/FUSE Registers */
+
+#define                      OTP_CONTROL  0xffc03600   /* OTP/Fuse Control Register */
+#define                          OTP_BEN  0xffc03604   /* OTP/Fuse Byte Enable */
+#define                       OTP_STATUS  0xffc03608   /* OTP/Fuse Status */
+#define                       OTP_TIMING  0xffc0360c   /* OTP/Fuse Access Timing */
+
+/* Security Registers */
+
+#define                    SECURE_SYSSWT  0xffc03620   /* Secure System Switches */
+#define                   SECURE_CONTROL  0xffc03624   /* Secure Control */
+#define                    SECURE_STATUS  0xffc03628   /* Secure Status */
+
+/* OTP Read/Write Data Buffer Registers */
+
+#define                        OTP_DATA0  0xffc03680   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define                        OTP_DATA1  0xffc03684   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define                        OTP_DATA2  0xffc03688   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define                        OTP_DATA3  0xffc0368c   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+
+/* NFC Registers */
+
+#define                          NFC_CTL  0xffc03700   /* NAND Control Register */
+#define                         NFC_STAT  0xffc03704   /* NAND Status Register */
+#define                      NFC_IRQSTAT  0xffc03708   /* NAND Interrupt Status Register */
+#define                      NFC_IRQMASK  0xffc0370c   /* NAND Interrupt Mask Register */
+#define                         NFC_ECC0  0xffc03710   /* NAND ECC Register 0 */
+#define                         NFC_ECC1  0xffc03714   /* NAND ECC Register 1 */
+#define                         NFC_ECC2  0xffc03718   /* NAND ECC Register 2 */
+#define                         NFC_ECC3  0xffc0371c   /* NAND ECC Register 3 */
+#define                        NFC_COUNT  0xffc03720   /* NAND ECC Count Register */
+#define                          NFC_RST  0xffc03724   /* NAND ECC Reset Register */
+#define                        NFC_PGCTL  0xffc03728   /* NAND Page Control Register */
+#define                         NFC_READ  0xffc0372c   /* NAND Read Data Register */
+#define                         NFC_ADDR  0xffc03740   /* NAND Address Register */
+#define                          NFC_CMD  0xffc03744   /* NAND Command Register */
+#define                      NFC_DATA_WR  0xffc03748   /* NAND Data Write Register */
+#define                      NFC_DATA_RD  0xffc0374c   /* NAND Data Read Register */
+
+/* ********************************************************** */
+/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
+/*     and MULTI BIT READ MACROS                              */
+/* ********************************************************** */
+
+/* Bit masks for HOST_CONTROL */
+
+#define                   HOST_CNTR_HOST_EN  0x1        /* Host Enable */
+#define                  HOST_CNTR_nHOST_EN  0x0
+#define                  HOST_CNTR_HOST_END  0x2        /* Host Endianess */
+#define                 HOST_CNTR_nHOST_END  0x0
+#define                 HOST_CNTR_DATA_SIZE  0x4        /* Data Size */
+#define                HOST_CNTR_nDATA_SIZE  0x0
+#define                  HOST_CNTR_HOST_RST  0x8        /* Host Reset */
+#define                 HOST_CNTR_nHOST_RST  0x0
+#define                  HOST_CNTR_HRDY_OVR  0x20       /* Host Ready Override */
+#define                 HOST_CNTR_nHRDY_OVR  0x0
+#define                  HOST_CNTR_INT_MODE  0x40       /* Interrupt Mode */
+#define                 HOST_CNTR_nINT_MODE  0x0
+#define                     HOST_CNTR_BT_EN  0x80       /* Bus Timeout Enable */
+#define                   HOST_CNTR_ nBT_EN  0x0
+#define                       HOST_CNTR_EHW  0x100      /* Enable Host Write */
+#define                      HOST_CNTR_nEHW  0x0
+#define                       HOST_CNTR_EHR  0x200      /* Enable Host Read */
+#define                      HOST_CNTR_nEHR  0x0
+#define                       HOST_CNTR_BDR  0x400      /* Burst DMA Requests */
+#define                      HOST_CNTR_nBDR  0x0
+
+/* Bit masks for HOST_STATUS */
+
+#define                     HOST_STAT_READY  0x1        /* DMA Ready */
+#define                    HOST_STAT_nREADY  0x0
+#define                  HOST_STAT_FIFOFULL  0x2        /* FIFO Full */
+#define                 HOST_STAT_nFIFOFULL  0x0
+#define                 HOST_STAT_FIFOEMPTY  0x4        /* FIFO Empty */
+#define                HOST_STAT_nFIFOEMPTY  0x0
+#define                  HOST_STAT_COMPLETE  0x8        /* DMA Complete */
+#define                 HOST_STAT_nCOMPLETE  0x0
+#define                      HOST_STAT_HSHK  0x10       /* Host Handshake */
+#define                     HOST_STAT_nHSHK  0x0
+#define                   HOST_STAT_TIMEOUT  0x20       /* Host Timeout */
+#define                  HOST_STAT_nTIMEOUT  0x0
+#define                      HOST_STAT_HIRQ  0x40       /* Host Interrupt Request */
+#define                     HOST_STAT_nHIRQ  0x0
+#define                HOST_STAT_ALLOW_CNFG  0x80       /* Allow New Configuration */
+#define               HOST_STAT_nALLOW_CNFG  0x0
+#define                   HOST_STAT_DMA_DIR  0x100      /* DMA Direction */
+#define                  HOST_STAT_nDMA_DIR  0x0
+#define                       HOST_STAT_BTE  0x200      /* Bus Timeout Enabled */
+#define                      HOST_STAT_nBTE  0x0
+#define               HOST_STAT_HOSTRD_DONE  0x8000     /* Host Read Completion Interrupt */
+#define              HOST_STAT_nHOSTRD_DONE  0x0
+
+/* Bit masks for HOST_TIMEOUT */
+
+#define             HOST_COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
+
+/* Bit masks for SECURE_SYSSWT */
+
+#define                   EMUDABL  0x1        /* Emulation Disable. */
+#define                  nEMUDABL  0x0
+#define                   RSTDABL  0x2        /* Reset Disable */
+#define                  nRSTDABL  0x0
+#define                   L1IDABL  0x1c       /* L1 Instruction Memory Disable. */
+#define                  L1DADABL  0xe0       /* L1 Data Bank A Memory Disable. */
+#define                  L1DBDABL  0x700      /* L1 Data Bank B Memory Disable. */
+#define                   DMA0OVR  0x800      /* DMA0 Memory Access Override */
+#define                  nDMA0OVR  0x0
+#define                   DMA1OVR  0x1000     /* DMA1 Memory Access Override */
+#define                  nDMA1OVR  0x0
+#define                    EMUOVR  0x4000     /* Emulation Override */
+#define                   nEMUOVR  0x0
+#define                    OTPSEN  0x8000     /* OTP Secrets Enable. */
+#define                   nOTPSEN  0x0
+#define                    L2DABL  0x70000    /* L2 Memory Disable. */
+
+/* Bit masks for SECURE_CONTROL */
+
+#define                   SECURE0  0x1        /* SECURE 0 */
+#define                  nSECURE0  0x0
+#define                   SECURE1  0x2        /* SECURE 1 */
+#define                  nSECURE1  0x0
+#define                   SECURE2  0x4        /* SECURE 2 */
+#define                  nSECURE2  0x0
+#define                   SECURE3  0x8        /* SECURE 3 */
+#define                  nSECURE3  0x0
+
+/* Bit masks for SECURE_STATUS */
+
+#define                   SECMODE  0x3        /* Secured Mode Control State */
+#define                       NMI  0x4        /* Non Maskable Interrupt */
+#define                      nNMI  0x0
+#define                   AFVALID  0x8        /* Authentication Firmware Valid */
+#define                  nAFVALID  0x0
+#define                    AFEXIT  0x10       /* Authentication Firmware Exit */
+#define                   nAFEXIT  0x0
+#define                   SECSTAT  0xe0       /* Secure Status */
+
+#endif /* _DEF_BF522_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/defBF525.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/defBF525.h
new file mode 100644
index 0000000..591e00f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/defBF525.h
@@ -0,0 +1,678 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF525_H
+#define _DEF_BF525_H
+
+/* BF525 is BF522 + USB */
+#include "defBF522.h"
+
+/* USB Control Registers */
+
+#define                        USB_FADDR  0xffc03800   /* Function address register */
+#define                        USB_POWER  0xffc03804   /* Power management register */
+#define                       USB_INTRTX  0xffc03808   /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
+#define                       USB_INTRRX  0xffc0380c   /* Interrupt register for Rx endpoints 1 to 7 */
+#define                      USB_INTRTXE  0xffc03810   /* Interrupt enable register for IntrTx */
+#define                      USB_INTRRXE  0xffc03814   /* Interrupt enable register for IntrRx */
+#define                      USB_INTRUSB  0xffc03818   /* Interrupt register for common USB interrupts */
+#define                     USB_INTRUSBE  0xffc0381c   /* Interrupt enable register for IntrUSB */
+#define                        USB_FRAME  0xffc03820   /* USB frame number */
+#define                        USB_INDEX  0xffc03824   /* Index register for selecting the indexed endpoint registers */
+#define                     USB_TESTMODE  0xffc03828   /* Enabled USB 20 test modes */
+#define                     USB_GLOBINTR  0xffc0382c   /* Global Interrupt Mask register and Wakeup Exception Interrupt */
+#define                   USB_GLOBAL_CTL  0xffc03830   /* Global Clock Control for the core */
+
+/* USB Packet Control Registers */
+
+#define                USB_TX_MAX_PACKET  0xffc03840   /* Maximum packet size for Host Tx endpoint */
+#define                         USB_CSR0  0xffc03844   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                        USB_TXCSR  0xffc03844   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                USB_RX_MAX_PACKET  0xffc03848   /* Maximum packet size for Host Rx endpoint */
+#define                        USB_RXCSR  0xffc0384c   /* Control Status register for Host Rx endpoint */
+#define                       USB_COUNT0  0xffc03850   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                      USB_RXCOUNT  0xffc03850   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                       USB_TXTYPE  0xffc03854   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
+#define                    USB_NAKLIMIT0  0xffc03858   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                   USB_TXINTERVAL  0xffc03858   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                       USB_RXTYPE  0xffc0385c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
+#define                   USB_RXINTERVAL  0xffc03860   /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
+#define                      USB_TXCOUNT  0xffc03868   /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* USB Endpoint FIFO Registers */
+
+#define                     USB_EP0_FIFO  0xffc03880   /* Endpoint 0 FIFO */
+#define                     USB_EP1_FIFO  0xffc03888   /* Endpoint 1 FIFO */
+#define                     USB_EP2_FIFO  0xffc03890   /* Endpoint 2 FIFO */
+#define                     USB_EP3_FIFO  0xffc03898   /* Endpoint 3 FIFO */
+#define                     USB_EP4_FIFO  0xffc038a0   /* Endpoint 4 FIFO */
+#define                     USB_EP5_FIFO  0xffc038a8   /* Endpoint 5 FIFO */
+#define                     USB_EP6_FIFO  0xffc038b0   /* Endpoint 6 FIFO */
+#define                     USB_EP7_FIFO  0xffc038b8   /* Endpoint 7 FIFO */
+
+/* USB OTG Control Registers */
+
+#define                  USB_OTG_DEV_CTL  0xffc03900   /* OTG Device Control Register */
+#define                 USB_OTG_VBUS_IRQ  0xffc03904   /* OTG VBUS Control Interrupts */
+#define                USB_OTG_VBUS_MASK  0xffc03908   /* VBUS Control Interrupt Enable */
+
+/* USB Phy Control Registers */
+
+#define                     USB_LINKINFO  0xffc03948   /* Enables programming of some PHY-side delays */
+#define                        USB_VPLEN  0xffc0394c   /* Determines duration of VBUS pulse for VBUS charging */
+#define                      USB_HS_EOF1  0xffc03950   /* Time buffer for High-Speed transactions */
+#define                      USB_FS_EOF1  0xffc03954   /* Time buffer for Full-Speed transactions */
+#define                      USB_LS_EOF1  0xffc03958   /* Time buffer for Low-Speed transactions */
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define                   USB_APHY_CNTRL  0xffc039e0   /* Register that increases visibility of Analog PHY */
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define                   USB_APHY_CALIB  0xffc039e4   /* Register used to set some calibration values */
+
+#define                  USB_APHY_CNTRL2  0xffc039e8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
+
+#define                  USB_PLLOSC_CTRL  0xffc039f0   /* Used to program different parameters for USB PLL and Oscillator */
+#define                   USB_SRP_CLKDIV  0xffc039f4   /* Used to program clock divide value for the clock fed to the SRP detection logic */
+
+/* USB Endpoint 0 Control Registers */
+
+#define                USB_EP_NI0_TXMAXP  0xffc03a00   /* Maximum packet size for Host Tx endpoint0 */
+#define                 USB_EP_NI0_TXCSR  0xffc03a04   /* Control Status register for endpoint 0 */
+#define                USB_EP_NI0_RXMAXP  0xffc03a08   /* Maximum packet size for Host Rx endpoint0 */
+#define                 USB_EP_NI0_RXCSR  0xffc03a0c   /* Control Status register for Host Rx endpoint0 */
+#define               USB_EP_NI0_RXCOUNT  0xffc03a10   /* Number of bytes received in endpoint 0 FIFO */
+#define                USB_EP_NI0_TXTYPE  0xffc03a14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
+#define            USB_EP_NI0_TXINTERVAL  0xffc03a18   /* Sets the NAK response timeout on Endpoint 0 */
+#define                USB_EP_NI0_RXTYPE  0xffc03a1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
+#define            USB_EP_NI0_RXINTERVAL  0xffc03a20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
+#define               USB_EP_NI0_TXCOUNT  0xffc03a28   /* Number of bytes to be written to the endpoint0 Tx FIFO */
+
+/* USB Endpoint 1 Control Registers */
+
+#define                USB_EP_NI1_TXMAXP  0xffc03a40   /* Maximum packet size for Host Tx endpoint1 */
+#define                 USB_EP_NI1_TXCSR  0xffc03a44   /* Control Status register for endpoint1 */
+#define                USB_EP_NI1_RXMAXP  0xffc03a48   /* Maximum packet size for Host Rx endpoint1 */
+#define                 USB_EP_NI1_RXCSR  0xffc03a4c   /* Control Status register for Host Rx endpoint1 */
+#define               USB_EP_NI1_RXCOUNT  0xffc03a50   /* Number of bytes received in endpoint1 FIFO */
+#define                USB_EP_NI1_TXTYPE  0xffc03a54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
+#define            USB_EP_NI1_TXINTERVAL  0xffc03a58   /* Sets the NAK response timeout on Endpoint1 */
+#define                USB_EP_NI1_RXTYPE  0xffc03a5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
+#define            USB_EP_NI1_RXINTERVAL  0xffc03a60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
+#define               USB_EP_NI1_TXCOUNT  0xffc03a68   /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
+
+/* USB Endpoint 2 Control Registers */
+
+#define                USB_EP_NI2_TXMAXP  0xffc03a80   /* Maximum packet size for Host Tx endpoint2 */
+#define                 USB_EP_NI2_TXCSR  0xffc03a84   /* Control Status register for endpoint2 */
+#define                USB_EP_NI2_RXMAXP  0xffc03a88   /* Maximum packet size for Host Rx endpoint2 */
+#define                 USB_EP_NI2_RXCSR  0xffc03a8c   /* Control Status register for Host Rx endpoint2 */
+#define               USB_EP_NI2_RXCOUNT  0xffc03a90   /* Number of bytes received in endpoint2 FIFO */
+#define                USB_EP_NI2_TXTYPE  0xffc03a94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
+#define            USB_EP_NI2_TXINTERVAL  0xffc03a98   /* Sets the NAK response timeout on Endpoint2 */
+#define                USB_EP_NI2_RXTYPE  0xffc03a9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
+#define            USB_EP_NI2_RXINTERVAL  0xffc03aa0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
+#define               USB_EP_NI2_TXCOUNT  0xffc03aa8   /* Number of bytes to be written to the endpoint2 Tx FIFO */
+
+/* USB Endpoint 3 Control Registers */
+
+#define                USB_EP_NI3_TXMAXP  0xffc03ac0   /* Maximum packet size for Host Tx endpoint3 */
+#define                 USB_EP_NI3_TXCSR  0xffc03ac4   /* Control Status register for endpoint3 */
+#define                USB_EP_NI3_RXMAXP  0xffc03ac8   /* Maximum packet size for Host Rx endpoint3 */
+#define                 USB_EP_NI3_RXCSR  0xffc03acc   /* Control Status register for Host Rx endpoint3 */
+#define               USB_EP_NI3_RXCOUNT  0xffc03ad0   /* Number of bytes received in endpoint3 FIFO */
+#define                USB_EP_NI3_TXTYPE  0xffc03ad4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
+#define            USB_EP_NI3_TXINTERVAL  0xffc03ad8   /* Sets the NAK response timeout on Endpoint3 */
+#define                USB_EP_NI3_RXTYPE  0xffc03adc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
+#define            USB_EP_NI3_RXINTERVAL  0xffc03ae0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
+#define               USB_EP_NI3_TXCOUNT  0xffc03ae8   /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
+
+/* USB Endpoint 4 Control Registers */
+
+#define                USB_EP_NI4_TXMAXP  0xffc03b00   /* Maximum packet size for Host Tx endpoint4 */
+#define                 USB_EP_NI4_TXCSR  0xffc03b04   /* Control Status register for endpoint4 */
+#define                USB_EP_NI4_RXMAXP  0xffc03b08   /* Maximum packet size for Host Rx endpoint4 */
+#define                 USB_EP_NI4_RXCSR  0xffc03b0c   /* Control Status register for Host Rx endpoint4 */
+#define               USB_EP_NI4_RXCOUNT  0xffc03b10   /* Number of bytes received in endpoint4 FIFO */
+#define                USB_EP_NI4_TXTYPE  0xffc03b14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
+#define            USB_EP_NI4_TXINTERVAL  0xffc03b18   /* Sets the NAK response timeout on Endpoint4 */
+#define                USB_EP_NI4_RXTYPE  0xffc03b1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
+#define            USB_EP_NI4_RXINTERVAL  0xffc03b20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
+#define               USB_EP_NI4_TXCOUNT  0xffc03b28   /* Number of bytes to be written to the endpoint4 Tx FIFO */
+
+/* USB Endpoint 5 Control Registers */
+
+#define                USB_EP_NI5_TXMAXP  0xffc03b40   /* Maximum packet size for Host Tx endpoint5 */
+#define                 USB_EP_NI5_TXCSR  0xffc03b44   /* Control Status register for endpoint5 */
+#define                USB_EP_NI5_RXMAXP  0xffc03b48   /* Maximum packet size for Host Rx endpoint5 */
+#define                 USB_EP_NI5_RXCSR  0xffc03b4c   /* Control Status register for Host Rx endpoint5 */
+#define               USB_EP_NI5_RXCOUNT  0xffc03b50   /* Number of bytes received in endpoint5 FIFO */
+#define                USB_EP_NI5_TXTYPE  0xffc03b54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
+#define            USB_EP_NI5_TXINTERVAL  0xffc03b58   /* Sets the NAK response timeout on Endpoint5 */
+#define                USB_EP_NI5_RXTYPE  0xffc03b5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
+#define            USB_EP_NI5_RXINTERVAL  0xffc03b60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
+#define               USB_EP_NI5_TXCOUNT  0xffc03b68   /* Number of bytes to be written to the endpoint5 Tx FIFO */
+
+/* USB Endpoint 6 Control Registers */
+
+#define                USB_EP_NI6_TXMAXP  0xffc03b80   /* Maximum packet size for Host Tx endpoint6 */
+#define                 USB_EP_NI6_TXCSR  0xffc03b84   /* Control Status register for endpoint6 */
+#define                USB_EP_NI6_RXMAXP  0xffc03b88   /* Maximum packet size for Host Rx endpoint6 */
+#define                 USB_EP_NI6_RXCSR  0xffc03b8c   /* Control Status register for Host Rx endpoint6 */
+#define               USB_EP_NI6_RXCOUNT  0xffc03b90   /* Number of bytes received in endpoint6 FIFO */
+#define                USB_EP_NI6_TXTYPE  0xffc03b94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
+#define            USB_EP_NI6_TXINTERVAL  0xffc03b98   /* Sets the NAK response timeout on Endpoint6 */
+#define                USB_EP_NI6_RXTYPE  0xffc03b9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
+#define            USB_EP_NI6_RXINTERVAL  0xffc03ba0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
+#define               USB_EP_NI6_TXCOUNT  0xffc03ba8   /* Number of bytes to be written to the endpoint6 Tx FIFO */
+
+/* USB Endpoint 7 Control Registers */
+
+#define                USB_EP_NI7_TXMAXP  0xffc03bc0   /* Maximum packet size for Host Tx endpoint7 */
+#define                 USB_EP_NI7_TXCSR  0xffc03bc4   /* Control Status register for endpoint7 */
+#define                USB_EP_NI7_RXMAXP  0xffc03bc8   /* Maximum packet size for Host Rx endpoint7 */
+#define                 USB_EP_NI7_RXCSR  0xffc03bcc   /* Control Status register for Host Rx endpoint7 */
+#define               USB_EP_NI7_RXCOUNT  0xffc03bd0   /* Number of bytes received in endpoint7 FIFO */
+#define                USB_EP_NI7_TXTYPE  0xffc03bd4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
+#define            USB_EP_NI7_TXINTERVAL  0xffc03bd8   /* Sets the NAK response timeout on Endpoint7 */
+#define                USB_EP_NI7_RXTYPE  0xffc03bdc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
+#define            USB_EP_NI7_RXINTERVAL  0xffc03be0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
+#define               USB_EP_NI7_TXCOUNT  0xffc03be8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
+
+#define                USB_DMA_INTERRUPT  0xffc03c00   /* Indicates pending interrupts for the DMA channels */
+
+/* USB Channel 0 Config Registers */
+
+#define                  USB_DMA0CONTROL  0xffc03c04   /* DMA master channel 0 configuration */
+#define                  USB_DMA0ADDRLOW  0xffc03c08   /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0ADDRHIGH  0xffc03c0c   /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0COUNTLOW  0xffc03c10   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
+#define                USB_DMA0COUNTHIGH  0xffc03c14   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
+
+/* USB Channel 1 Config Registers */
+
+#define                  USB_DMA1CONTROL  0xffc03c24   /* DMA master channel 1 configuration */
+#define                  USB_DMA1ADDRLOW  0xffc03c28   /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1ADDRHIGH  0xffc03c2c   /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1COUNTLOW  0xffc03c30   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
+#define                USB_DMA1COUNTHIGH  0xffc03c34   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
+
+/* USB Channel 2 Config Registers */
+
+#define                  USB_DMA2CONTROL  0xffc03c44   /* DMA master channel 2 configuration */
+#define                  USB_DMA2ADDRLOW  0xffc03c48   /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2ADDRHIGH  0xffc03c4c   /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2COUNTLOW  0xffc03c50   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
+#define                USB_DMA2COUNTHIGH  0xffc03c54   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
+
+/* USB Channel 3 Config Registers */
+
+#define                  USB_DMA3CONTROL  0xffc03c64   /* DMA master channel 3 configuration */
+#define                  USB_DMA3ADDRLOW  0xffc03c68   /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3ADDRHIGH  0xffc03c6c   /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3COUNTLOW  0xffc03c70   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
+#define                USB_DMA3COUNTHIGH  0xffc03c74   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
+
+/* USB Channel 4 Config Registers */
+
+#define                  USB_DMA4CONTROL  0xffc03c84   /* DMA master channel 4 configuration */
+#define                  USB_DMA4ADDRLOW  0xffc03c88   /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4ADDRHIGH  0xffc03c8c   /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4COUNTLOW  0xffc03c90   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
+#define                USB_DMA4COUNTHIGH  0xffc03c94   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
+
+/* USB Channel 5 Config Registers */
+
+#define                  USB_DMA5CONTROL  0xffc03ca4   /* DMA master channel 5 configuration */
+#define                  USB_DMA5ADDRLOW  0xffc03ca8   /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5ADDRHIGH  0xffc03cac   /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5COUNTLOW  0xffc03cb0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
+#define                USB_DMA5COUNTHIGH  0xffc03cb4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
+
+/* USB Channel 6 Config Registers */
+
+#define                  USB_DMA6CONTROL  0xffc03cc4   /* DMA master channel 6 configuration */
+#define                  USB_DMA6ADDRLOW  0xffc03cc8   /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6ADDRHIGH  0xffc03ccc   /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6COUNTLOW  0xffc03cd0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
+#define                USB_DMA6COUNTHIGH  0xffc03cd4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
+
+/* USB Channel 7 Config Registers */
+
+#define                  USB_DMA7CONTROL  0xffc03ce4   /* DMA master channel 7 configuration */
+#define                  USB_DMA7ADDRLOW  0xffc03ce8   /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7ADDRHIGH  0xffc03cec   /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7COUNTLOW  0xffc03cf0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
+#define                USB_DMA7COUNTHIGH  0xffc03cf4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
+
+/* Bit masks for USB_FADDR */
+
+#define          FUNCTION_ADDRESS  0x7f       /* Function address */
+
+/* Bit masks for USB_POWER */
+
+#define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
+#define          nENABLE_SUSPENDM  0x0       
+#define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
+#define             nSUSPEND_MODE  0x0       
+#define               RESUME_MODE  0x4        /* DMA Mode */
+#define              nRESUME_MODE  0x0       
+#define                     RESET  0x8        /* Reset indicator */
+#define                    nRESET  0x0       
+#define                   HS_MODE  0x10       /* High Speed mode indicator */
+#define                  nHS_MODE  0x0       
+#define                 HS_ENABLE  0x20       /* high Speed Enable */
+#define                nHS_ENABLE  0x0       
+#define                 SOFT_CONN  0x40       /* Soft connect */
+#define                nSOFT_CONN  0x0       
+#define                ISO_UPDATE  0x80       /* Isochronous update */
+#define               nISO_UPDATE  0x0       
+
+/* Bit masks for USB_INTRTX */
+
+#define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
+#define                   nEP0_TX  0x0       
+#define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
+#define                   nEP1_TX  0x0       
+#define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
+#define                   nEP2_TX  0x0       
+#define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
+#define                   nEP3_TX  0x0       
+#define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
+#define                   nEP4_TX  0x0       
+#define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
+#define                   nEP5_TX  0x0       
+#define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
+#define                   nEP6_TX  0x0       
+#define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
+#define                   nEP7_TX  0x0       
+
+/* Bit masks for USB_INTRRX */
+
+#define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
+#define                   nEP1_RX  0x0       
+#define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
+#define                   nEP2_RX  0x0       
+#define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
+#define                   nEP3_RX  0x0       
+#define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
+#define                   nEP4_RX  0x0       
+#define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
+#define                   nEP5_RX  0x0       
+#define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
+#define                   nEP6_RX  0x0       
+#define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
+#define                   nEP7_RX  0x0       
+
+/* Bit masks for USB_INTRTXE */
+
+#define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
+#define                 nEP0_TX_E  0x0       
+#define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
+#define                 nEP1_TX_E  0x0       
+#define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
+#define                 nEP2_TX_E  0x0       
+#define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
+#define                 nEP3_TX_E  0x0       
+#define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
+#define                 nEP4_TX_E  0x0       
+#define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
+#define                 nEP5_TX_E  0x0       
+#define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
+#define                 nEP6_TX_E  0x0       
+#define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
+#define                 nEP7_TX_E  0x0       
+
+/* Bit masks for USB_INTRRXE */
+
+#define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
+#define                 nEP1_RX_E  0x0       
+#define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
+#define                 nEP2_RX_E  0x0       
+#define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
+#define                 nEP3_RX_E  0x0       
+#define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
+#define                 nEP4_RX_E  0x0       
+#define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
+#define                 nEP5_RX_E  0x0       
+#define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
+#define                 nEP6_RX_E  0x0       
+#define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
+#define                 nEP7_RX_E  0x0       
+
+/* Bit masks for USB_INTRUSB */
+
+#define                 SUSPEND_B  0x1        /* Suspend indicator */
+#define                nSUSPEND_B  0x0       
+#define                  RESUME_B  0x2        /* Resume indicator */
+#define                 nRESUME_B  0x0       
+#define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
+#define         nRESET_OR_BABLE_B  0x0       
+#define                     SOF_B  0x8        /* Start of frame */
+#define                    nSOF_B  0x0       
+#define                    CONN_B  0x10       /* Connection indicator */
+#define                   nCONN_B  0x0       
+#define                  DISCON_B  0x20       /* Disconnect indicator */
+#define                 nDISCON_B  0x0       
+#define             SESSION_REQ_B  0x40       /* Session Request */
+#define            nSESSION_REQ_B  0x0       
+#define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
+#define             nVBUS_ERROR_B  0x0       
+
+/* Bit masks for USB_INTRUSBE */
+
+#define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
+#define               nSUSPEND_BE  0x0       
+#define                 RESUME_BE  0x2        /* Resume indicator int enable */
+#define                nRESUME_BE  0x0       
+#define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
+#define        nRESET_OR_BABLE_BE  0x0       
+#define                    SOF_BE  0x8        /* Start of frame int enable */
+#define                   nSOF_BE  0x0       
+#define                   CONN_BE  0x10       /* Connection indicator int enable */
+#define                  nCONN_BE  0x0       
+#define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
+#define                nDISCON_BE  0x0       
+#define            SESSION_REQ_BE  0x40       /* Session Request int enable */
+#define           nSESSION_REQ_BE  0x0       
+#define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
+#define            nVBUS_ERROR_BE  0x0       
+
+/* Bit masks for USB_FRAME */
+
+#define              FRAME_NUMBER  0x7ff      /* Frame number */
+
+/* Bit masks for USB_INDEX */
+
+#define         SELECTED_ENDPOINT  0xf        /* selected endpoint */
+
+/* Bit masks for USB_GLOBAL_CTL */
+
+#define                GLOBAL_ENA  0x1        /* enables USB module */
+#define               nGLOBAL_ENA  0x0       
+#define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
+#define               nEP1_TX_ENA  0x0       
+#define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
+#define               nEP2_TX_ENA  0x0       
+#define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
+#define               nEP3_TX_ENA  0x0       
+#define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
+#define               nEP4_TX_ENA  0x0       
+#define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
+#define               nEP5_TX_ENA  0x0       
+#define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
+#define               nEP6_TX_ENA  0x0       
+#define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
+#define               nEP7_TX_ENA  0x0       
+#define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
+#define               nEP1_RX_ENA  0x0       
+#define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
+#define               nEP2_RX_ENA  0x0       
+#define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
+#define               nEP3_RX_ENA  0x0       
+#define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
+#define               nEP4_RX_ENA  0x0       
+#define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
+#define               nEP5_RX_ENA  0x0       
+#define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
+#define               nEP6_RX_ENA  0x0       
+#define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
+#define               nEP7_RX_ENA  0x0       
+
+/* Bit masks for USB_OTG_DEV_CTL */
+
+#define                   SESSION  0x1        /* session indicator */
+#define                  nSESSION  0x0       
+#define                  HOST_REQ  0x2        /* Host negotiation request */
+#define                 nHOST_REQ  0x0       
+#define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
+#define                nHOST_MODE  0x0       
+#define                     VBUS0  0x8        /* Vbus level indicator[0] */
+#define                    nVBUS0  0x0       
+#define                     VBUS1  0x10       /* Vbus level indicator[1] */
+#define                    nVBUS1  0x0       
+#define                     LSDEV  0x20       /* Low-speed indicator */
+#define                    nLSDEV  0x0       
+#define                     FSDEV  0x40       /* Full or High-speed indicator */
+#define                    nFSDEV  0x0       
+#define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
+#define                 nB_DEVICE  0x0       
+
+/* Bit masks for USB_OTG_VBUS_IRQ */
+
+#define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
+#define            nDRIVE_VBUS_ON  0x0       
+#define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
+#define           nDRIVE_VBUS_OFF  0x0       
+#define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
+#define          nCHRG_VBUS_START  0x0       
+#define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
+#define            nCHRG_VBUS_END  0x0       
+#define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
+#define       nDISCHRG_VBUS_START  0x0       
+#define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
+#define         nDISCHRG_VBUS_END  0x0       
+
+/* Bit masks for USB_OTG_VBUS_MASK */
+
+#define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
+#define        nDRIVE_VBUS_ON_ENA  0x0       
+#define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
+#define       nDRIVE_VBUS_OFF_ENA  0x0       
+#define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
+#define      nCHRG_VBUS_START_ENA  0x0       
+#define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
+#define        nCHRG_VBUS_END_ENA  0x0       
+#define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
+#define   nDISCHRG_VBUS_START_ENA  0x0       
+#define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
+#define     nDISCHRG_VBUS_END_ENA  0x0       
+
+/* Bit masks for USB_CSR0 */
+
+#define                  RXPKTRDY  0x1        /* data packet receive indicator */
+#define                 nRXPKTRDY  0x0       
+#define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
+#define                 nTXPKTRDY  0x0       
+#define                STALL_SENT  0x4        /* STALL handshake sent */
+#define               nSTALL_SENT  0x0       
+#define                   DATAEND  0x8        /* Data end indicator */
+#define                  nDATAEND  0x0       
+#define                  SETUPEND  0x10       /* Setup end */
+#define                 nSETUPEND  0x0       
+#define                 SENDSTALL  0x20       /* Send STALL handshake */
+#define                nSENDSTALL  0x0       
+#define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
+#define        nSERVICED_RXPKTRDY  0x0       
+#define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
+#define        nSERVICED_SETUPEND  0x0       
+#define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
+#define                nFLUSHFIFO  0x0       
+#define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
+#define         nSTALL_RECEIVED_H  0x0       
+#define                SETUPPKT_H  0x8        /* send Setup token host mode */
+#define               nSETUPPKT_H  0x0       
+#define                   ERROR_H  0x10       /* timeout error indicator host mode */
+#define                  nERROR_H  0x0       
+#define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
+#define                 nREQPKT_H  0x0       
+#define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
+#define              nSTATUSPKT_H  0x0       
+#define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
+#define            nNAK_TIMEOUT_H  0x0       
+
+/* Bit masks for USB_COUNT0 */
+
+#define              EP0_RX_COUNT  0x7f       /* number of received bytes in EP0 FIFO */
+
+/* Bit masks for USB_NAKLIMIT0 */
+
+#define             EP0_NAK_LIMIT  0x1f       /* number of frames/micro frames after which EP0 timeouts */
+
+/* Bit masks for USB_TX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_T  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_RX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_R  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_TXCSR */
+
+#define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
+#define               nTXPKTRDY_T  0x0       
+#define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
+#define         nFIFO_NOT_EMPTY_T  0x0       
+#define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
+#define               nUNDERRUN_T  0x0       
+#define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
+#define              nFLUSHFIFO_T  0x0       
+#define              STALL_SEND_T  0x10       /* issue a Stall handshake */
+#define             nSTALL_SEND_T  0x0       
+#define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
+#define             nSTALL_SENT_T  0x0       
+#define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
+#define       nCLEAR_DATATOGGLE_T  0x0       
+#define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
+#define               nINCOMPTX_T  0x0       
+#define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
+#define             nDMAREQMODE_T  0x0       
+#define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
+#define       nFORCE_DATATOGGLE_T  0x0       
+#define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
+#define             nDMAREQ_ENA_T  0x0       
+#define                     ISO_T  0x4000     /* enable Isochronous transfers */
+#define                    nISO_T  0x0       
+#define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
+#define                nAUTOSET_T  0x0       
+#define                  ERROR_TH  0x4        /* error condition host mode */
+#define                 nERROR_TH  0x0       
+#define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
+#define        nSTALL_RECEIVED_TH  0x0       
+#define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
+#define           nNAK_TIMEOUT_TH  0x0       
+
+/* Bit masks for USB_TXCOUNT */
+
+#define                  TX_COUNT  0x1fff     /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* Bit masks for USB_RXCSR */
+
+#define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
+#define               nRXPKTRDY_R  0x0       
+#define               FIFO_FULL_R  0x2        /* FIFO not empty */
+#define              nFIFO_FULL_R  0x0       
+#define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
+#define                nOVERRUN_R  0x0       
+#define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
+#define              nDATAERROR_R  0x0       
+#define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
+#define              nFLUSHFIFO_R  0x0       
+#define              STALL_SEND_R  0x20       /* issue a Stall handshake */
+#define             nSTALL_SEND_R  0x0       
+#define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
+#define             nSTALL_SENT_R  0x0       
+#define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
+#define       nCLEAR_DATATOGGLE_R  0x0       
+#define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
+#define               nINCOMPRX_R  0x0       
+#define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
+#define             nDMAREQMODE_R  0x0       
+#define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
+#define                nDISNYET_R  0x0       
+#define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
+#define             nDMAREQ_ENA_R  0x0       
+#define                     ISO_R  0x4000     /* enable Isochronous transfers */
+#define                    nISO_R  0x0       
+#define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
+#define              nAUTOCLEAR_R  0x0       
+#define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
+#define                 nERROR_RH  0x0       
+#define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
+#define                nREQPKT_RH  0x0       
+#define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
+#define        nSTALL_RECEIVED_RH  0x0       
+#define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
+#define              nINCOMPRX_RH  0x0       
+#define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
+#define            nDMAREQMODE_RH  0x0       
+#define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
+#define               nAUTOREQ_RH  0x0       
+
+/* Bit masks for USB_RXCOUNT */
+
+#define                  RX_COUNT  0x1fff     /* Number of received bytes in the packet in the Rx FIFO */
+
+/* Bit masks for USB_TXTYPE */
+
+#define            TARGET_EP_NO_T  0xf        /* EP number */
+#define                PROTOCOL_T  0xc        /* transfer type */
+
+/* Bit masks for USB_TXINTERVAL */
+
+#define          TX_POLL_INTERVAL  0xff       /* polling interval for selected Tx EP */
+
+/* Bit masks for USB_RXTYPE */
+
+#define            TARGET_EP_NO_R  0xf        /* EP number */
+#define                PROTOCOL_R  0xc        /* transfer type */
+
+/* Bit masks for USB_RXINTERVAL */
+
+#define          RX_POLL_INTERVAL  0xff       /* polling interval for selected Rx EP */
+
+/* Bit masks for USB_DMA_INTERRUPT */
+
+#define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
+#define                 nDMA0_INT  0x0       
+#define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
+#define                 nDMA1_INT  0x0       
+#define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
+#define                 nDMA2_INT  0x0       
+#define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
+#define                 nDMA3_INT  0x0       
+#define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
+#define                 nDMA4_INT  0x0       
+#define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
+#define                 nDMA5_INT  0x0       
+#define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
+#define                 nDMA6_INT  0x0       
+#define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
+#define                 nDMA7_INT  0x0       
+
+/* Bit masks for USB_DMAxCONTROL */
+
+#define                   DMA_ENA  0x1        /* DMA enable */
+#define                  nDMA_ENA  0x0       
+#define                 DIRECTION  0x2        /* direction of DMA transfer */
+#define                nDIRECTION  0x0       
+#define                      MODE  0x4        /* DMA Bus error */
+#define                     nMODE  0x0       
+#define                   INT_ENA  0x8        /* Interrupt enable */
+#define                  nINT_ENA  0x0       
+#define                     EPNUM  0xf0       /* EP number */
+#define                  BUSERROR  0x100      /* DMA Bus error */
+#define                 nBUSERROR  0x0       
+
+/* Bit masks for USB_DMAxADDRHIGH */
+
+#define             DMA_ADDR_HIGH  0xffff     /* Upper 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxADDRLOW */
+
+#define              DMA_ADDR_LOW  0xffff     /* Lower 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTHIGH */
+
+#define            DMA_COUNT_HIGH  0xffff     /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTLOW */
+
+#define             DMA_COUNT_LOW  0xffff     /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
+
+#endif /* _DEF_BF525_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/defBF527.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/defBF527.h
new file mode 100644
index 0000000..aeb8479
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/defBF527.h
@@ -0,0 +1,391 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF527_H
+#define _DEF_BF527_H
+
+/* BF527 is BF525 + EMAC */
+#include "defBF525.h"
+
+/* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF) */
+
+#define EMAC_OPMODE             0xFFC03000       /* Operating Mode Register                              */
+#define EMAC_ADDRLO             0xFFC03004       /* Address Low (32 LSBs) Register                       */
+#define EMAC_ADDRHI             0xFFC03008       /* Address High (16 MSBs) Register                      */
+#define EMAC_HASHLO             0xFFC0300C       /* Multicast Hash Table Low (Bins 31-0) Register        */
+#define EMAC_HASHHI             0xFFC03010       /* Multicast Hash Table High (Bins 63-32) Register      */
+#define EMAC_STAADD             0xFFC03014       /* Station Management Address Register                  */
+#define EMAC_STADAT             0xFFC03018       /* Station Management Data Register                     */
+#define EMAC_FLC                0xFFC0301C       /* Flow Control Register                                */
+#define EMAC_VLAN1              0xFFC03020       /* VLAN1 Tag Register                                   */
+#define EMAC_VLAN2              0xFFC03024       /* VLAN2 Tag Register                                   */
+#define EMAC_WKUP_CTL           0xFFC0302C       /* Wake-Up Control/Status Register                      */
+#define EMAC_WKUP_FFMSK0        0xFFC03030       /* Wake-Up Frame Filter 0 Byte Mask Register            */
+#define EMAC_WKUP_FFMSK1        0xFFC03034       /* Wake-Up Frame Filter 1 Byte Mask Register            */
+#define EMAC_WKUP_FFMSK2        0xFFC03038       /* Wake-Up Frame Filter 2 Byte Mask Register            */
+#define EMAC_WKUP_FFMSK3        0xFFC0303C       /* Wake-Up Frame Filter 3 Byte Mask Register            */
+#define EMAC_WKUP_FFCMD         0xFFC03040       /* Wake-Up Frame Filter Commands Register               */
+#define EMAC_WKUP_FFOFF         0xFFC03044       /* Wake-Up Frame Filter Offsets Register                */
+#define EMAC_WKUP_FFCRC0        0xFFC03048       /* Wake-Up Frame Filter 0,1 CRC-16 Register             */
+#define EMAC_WKUP_FFCRC1        0xFFC0304C       /* Wake-Up Frame Filter 2,3 CRC-16 Register             */
+
+#define EMAC_SYSCTL             0xFFC03060       /* EMAC System Control Register                         */
+#define EMAC_SYSTAT             0xFFC03064       /* EMAC System Status Register                          */
+#define EMAC_RX_STAT            0xFFC03068       /* RX Current Frame Status Register                     */
+#define EMAC_RX_STKY            0xFFC0306C       /* RX Sticky Frame Status Register                      */
+#define EMAC_RX_IRQE            0xFFC03070       /* RX Frame Status Interrupt Enables Register           */
+#define EMAC_TX_STAT            0xFFC03074       /* TX Current Frame Status Register                     */
+#define EMAC_TX_STKY            0xFFC03078       /* TX Sticky Frame Status Register                      */
+#define EMAC_TX_IRQE            0xFFC0307C       /* TX Frame Status Interrupt Enables Register           */
+
+#define EMAC_MMC_CTL            0xFFC03080       /* MMC Counter Control Register                         */
+#define EMAC_MMC_RIRQS          0xFFC03084       /* MMC RX Interrupt Status Register                     */
+#define EMAC_MMC_RIRQE          0xFFC03088       /* MMC RX Interrupt Enables Register                    */
+#define EMAC_MMC_TIRQS          0xFFC0308C       /* MMC TX Interrupt Status Register                     */
+#define EMAC_MMC_TIRQE          0xFFC03090       /* MMC TX Interrupt Enables Register                    */
+
+#define EMAC_RXC_OK             0xFFC03100       /* RX Frame Successful Count                            */
+#define EMAC_RXC_FCS            0xFFC03104       /* RX Frame FCS Failure Count                           */
+#define EMAC_RXC_ALIGN          0xFFC03108       /* RX Alignment Error Count                             */
+#define EMAC_RXC_OCTET          0xFFC0310C       /* RX Octets Successfully Received Count                */
+#define EMAC_RXC_DMAOVF         0xFFC03110       /* Internal MAC Sublayer Error RX Frame Count           */
+#define EMAC_RXC_UNICST         0xFFC03114       /* Unicast RX Frame Count                               */
+#define EMAC_RXC_MULTI          0xFFC03118       /* Multicast RX Frame Count                             */
+#define EMAC_RXC_BROAD          0xFFC0311C       /* Broadcast RX Frame Count                             */
+#define EMAC_RXC_LNERRI         0xFFC03120       /* RX Frame In Range Error Count                        */
+#define EMAC_RXC_LNERRO         0xFFC03124       /* RX Frame Out Of Range Error Count                    */
+#define EMAC_RXC_LONG           0xFFC03128       /* RX Frame Too Long Count                              */
+#define EMAC_RXC_MACCTL         0xFFC0312C       /* MAC Control RX Frame Count                           */
+#define EMAC_RXC_OPCODE         0xFFC03130       /* Unsupported Op-Code RX Frame Count                   */
+#define EMAC_RXC_PAUSE          0xFFC03134       /* MAC Control Pause RX Frame Count                     */
+#define EMAC_RXC_ALLFRM         0xFFC03138       /* Overall RX Frame Count                               */
+#define EMAC_RXC_ALLOCT         0xFFC0313C       /* Overall RX Octet Count                               */
+#define EMAC_RXC_TYPED          0xFFC03140       /* Type/Length Consistent RX Frame Count                */
+#define EMAC_RXC_SHORT          0xFFC03144       /* RX Frame Fragment Count - Byte Count x < 64          */
+#define EMAC_RXC_EQ64           0xFFC03148       /* Good RX Frame Count - Byte Count x = 64              */
+#define EMAC_RXC_LT128          0xFFC0314C       /* Good RX Frame Count - Byte Count  64 < x < 128       */
+#define EMAC_RXC_LT256          0xFFC03150       /* Good RX Frame Count - Byte Count 128 <= x < 256      */
+#define EMAC_RXC_LT512          0xFFC03154       /* Good RX Frame Count - Byte Count 256 <= x < 512      */
+#define EMAC_RXC_LT1024         0xFFC03158       /* Good RX Frame Count - Byte Count 512 <= x < 1024     */
+#define EMAC_RXC_GE1024         0xFFC0315C       /* Good RX Frame Count - Byte Count x >= 1024           */
+
+#define EMAC_TXC_OK             0xFFC03180       /* TX Frame Successful Count                             */
+#define EMAC_TXC_1COL           0xFFC03184       /* TX Frames Successful After Single Collision Count     */
+#define EMAC_TXC_GT1COL         0xFFC03188       /* TX Frames Successful After Multiple Collisions Count  */
+#define EMAC_TXC_OCTET          0xFFC0318C       /* TX Octets Successfully Received Count                 */
+#define EMAC_TXC_DEFER          0xFFC03190       /* TX Frame Delayed Due To Busy Count                    */
+#define EMAC_TXC_LATECL         0xFFC03194       /* Late TX Collisions Count                              */
+#define EMAC_TXC_XS_COL         0xFFC03198       /* TX Frame Failed Due To Excessive Collisions Count     */
+#define EMAC_TXC_DMAUND         0xFFC0319C       /* Internal MAC Sublayer Error TX Frame Count            */
+#define EMAC_TXC_CRSERR         0xFFC031A0       /* Carrier Sense Deasserted During TX Frame Count        */
+#define EMAC_TXC_UNICST         0xFFC031A4       /* Unicast TX Frame Count                                */
+#define EMAC_TXC_MULTI          0xFFC031A8       /* Multicast TX Frame Count                              */
+#define EMAC_TXC_BROAD          0xFFC031AC       /* Broadcast TX Frame Count                              */
+#define EMAC_TXC_XS_DFR         0xFFC031B0       /* TX Frames With Excessive Deferral Count               */
+#define EMAC_TXC_MACCTL         0xFFC031B4       /* MAC Control TX Frame Count                            */
+#define EMAC_TXC_ALLFRM         0xFFC031B8       /* Overall TX Frame Count                                */
+#define EMAC_TXC_ALLOCT         0xFFC031BC       /* Overall TX Octet Count                                */
+#define EMAC_TXC_EQ64           0xFFC031C0       /* Good TX Frame Count - Byte Count x = 64               */
+#define EMAC_TXC_LT128          0xFFC031C4       /* Good TX Frame Count - Byte Count  64 < x < 128        */
+#define EMAC_TXC_LT256          0xFFC031C8       /* Good TX Frame Count - Byte Count 128 <= x < 256       */
+#define EMAC_TXC_LT512          0xFFC031CC       /* Good TX Frame Count - Byte Count 256 <= x < 512       */
+#define EMAC_TXC_LT1024         0xFFC031D0       /* Good TX Frame Count - Byte Count 512 <= x < 1024      */
+#define EMAC_TXC_GE1024         0xFFC031D4       /* Good TX Frame Count - Byte Count x >= 1024            */
+#define EMAC_TXC_ABORT          0xFFC031D8       /* Total TX Frames Aborted Count                         */
+
+/* Listing for IEEE-Supported Count Registers */
+
+#define FramesReceivedOK                EMAC_RXC_OK        /* RX Frame Successful Count                            */
+#define FrameCheckSequenceErrors        EMAC_RXC_FCS       /* RX Frame FCS Failure Count                           */
+#define AlignmentErrors                 EMAC_RXC_ALIGN     /* RX Alignment Error Count                             */
+#define OctetsReceivedOK                EMAC_RXC_OCTET     /* RX Octets Successfully Received Count                */
+#define FramesLostDueToIntMACRcvError   EMAC_RXC_DMAOVF    /* Internal MAC Sublayer Error RX Frame Count           */
+#define UnicastFramesReceivedOK         EMAC_RXC_UNICST    /* Unicast RX Frame Count                               */
+#define MulticastFramesReceivedOK       EMAC_RXC_MULTI     /* Multicast RX Frame Count                             */
+#define BroadcastFramesReceivedOK       EMAC_RXC_BROAD     /* Broadcast RX Frame Count                             */
+#define InRangeLengthErrors             EMAC_RXC_LNERRI    /* RX Frame In Range Error Count                        */
+#define OutOfRangeLengthField           EMAC_RXC_LNERRO    /* RX Frame Out Of Range Error Count                    */
+#define FrameTooLongErrors              EMAC_RXC_LONG      /* RX Frame Too Long Count                              */
+#define MACControlFramesReceived        EMAC_RXC_MACCTL    /* MAC Control RX Frame Count                           */
+#define UnsupportedOpcodesReceived      EMAC_RXC_OPCODE    /* Unsupported Op-Code RX Frame Count                   */
+#define PAUSEMACCtrlFramesReceived      EMAC_RXC_PAUSE     /* MAC Control Pause RX Frame Count                     */
+#define FramesReceivedAll               EMAC_RXC_ALLFRM    /* Overall RX Frame Count                               */
+#define OctetsReceivedAll               EMAC_RXC_ALLOCT    /* Overall RX Octet Count                               */
+#define TypedFramesReceived             EMAC_RXC_TYPED     /* Type/Length Consistent RX Frame Count                */
+#define FramesLenLt64Received           EMAC_RXC_SHORT     /* RX Frame Fragment Count - Byte Count x < 64          */
+#define FramesLenEq64Received           EMAC_RXC_EQ64      /* Good RX Frame Count - Byte Count x = 64              */
+#define FramesLen65_127Received         EMAC_RXC_LT128     /* Good RX Frame Count - Byte Count  64 < x < 128       */
+#define FramesLen128_255Received        EMAC_RXC_LT256     /* Good RX Frame Count - Byte Count 128 <= x < 256      */
+#define FramesLen256_511Received        EMAC_RXC_LT512     /* Good RX Frame Count - Byte Count 256 <= x < 512      */
+#define FramesLen512_1023Received       EMAC_RXC_LT1024    /* Good RX Frame Count - Byte Count 512 <= x < 1024     */
+#define FramesLen1024_MaxReceived       EMAC_RXC_GE1024    /* Good RX Frame Count - Byte Count x >= 1024           */
+
+#define FramesTransmittedOK             EMAC_TXC_OK        /* TX Frame Successful Count                            */
+#define SingleCollisionFrames           EMAC_TXC_1COL      /* TX Frames Successful After Single Collision Count    */
+#define MultipleCollisionFrames         EMAC_TXC_GT1COL    /* TX Frames Successful After Multiple Collisions Count */
+#define OctetsTransmittedOK             EMAC_TXC_OCTET     /* TX Octets Successfully Received Count                */
+#define FramesWithDeferredXmissions     EMAC_TXC_DEFER     /* TX Frame Delayed Due To Busy Count                   */
+#define LateCollisions                  EMAC_TXC_LATECL    /* Late TX Collisions Count                             */
+#define FramesAbortedDueToXSColls       EMAC_TXC_XS_COL    /* TX Frame Failed Due To Excessive Collisions Count    */
+#define FramesLostDueToIntMacXmitError  EMAC_TXC_DMAUND    /* Internal MAC Sublayer Error TX Frame Count           */
+#define CarrierSenseErrors              EMAC_TXC_CRSERR    /* Carrier Sense Deasserted During TX Frame Count       */
+#define UnicastFramesXmittedOK          EMAC_TXC_UNICST    /* Unicast TX Frame Count                               */
+#define MulticastFramesXmittedOK        EMAC_TXC_MULTI     /* Multicast TX Frame Count                             */
+#define BroadcastFramesXmittedOK        EMAC_TXC_BROAD     /* Broadcast TX Frame Count                             */
+#define FramesWithExcessiveDeferral     EMAC_TXC_XS_DFR    /* TX Frames With Excessive Deferral Count              */
+#define MACControlFramesTransmitted     EMAC_TXC_MACCTL    /* MAC Control TX Frame Count                           */
+#define FramesTransmittedAll            EMAC_TXC_ALLFRM    /* Overall TX Frame Count                               */
+#define OctetsTransmittedAll            EMAC_TXC_ALLOCT    /* Overall TX Octet Count                               */
+#define FramesLenEq64Transmitted        EMAC_TXC_EQ64      /* Good TX Frame Count - Byte Count x = 64              */
+#define FramesLen65_127Transmitted      EMAC_TXC_LT128     /* Good TX Frame Count - Byte Count  64 < x < 128       */
+#define FramesLen128_255Transmitted     EMAC_TXC_LT256     /* Good TX Frame Count - Byte Count 128 <= x < 256      */
+#define FramesLen256_511Transmitted     EMAC_TXC_LT512     /* Good TX Frame Count - Byte Count 256 <= x < 512      */
+#define FramesLen512_1023Transmitted    EMAC_TXC_LT1024    /* Good TX Frame Count - Byte Count 512 <= x < 1024     */
+#define FramesLen1024_MaxTransmitted    EMAC_TXC_GE1024    /* Good TX Frame Count - Byte Count x >= 1024           */
+#define TxAbortedFrames                 EMAC_TXC_ABORT     /* Total TX Frames Aborted Count                        */
+
+/***********************************************************************************
+** System MMR Register Bits And Macros
+**
+** Disclaimer:	All macros are intended to make C and Assembly code more readable.
+**				Use these macros carefully, as any that do left shifts for field
+**				depositing will result in the lower order bits being destroyed.  Any
+**				macro that shifts left to properly position the bit-field should be
+**				used as part of an OR to initialize a register and NOT as a dynamic
+**				modifier UNLESS the lower order bits are saved and ORed back in when
+**				the macro is used.
+*************************************************************************************/
+
+/************************  ETHERNET 10/100 CONTROLLER MASKS  ************************/
+
+/* EMAC_OPMODE Masks */
+
+#define	RE                 0x00000001     /* Receiver Enable                                    */
+#define	ASTP               0x00000002     /* Enable Automatic Pad Stripping On RX Frames        */
+#define	HU                 0x00000010     /* Hash Filter Unicast Address                        */
+#define	HM                 0x00000020     /* Hash Filter Multicast Address                      */
+#define	PAM                0x00000040     /* Pass-All-Multicast Mode Enable                     */
+#define	PR                 0x00000080     /* Promiscuous Mode Enable                            */
+#define	IFE                0x00000100     /* Inverse Filtering Enable                           */
+#define	DBF                0x00000200     /* Disable Broadcast Frame Reception                  */
+#define	PBF                0x00000400     /* Pass Bad Frames Enable                             */
+#define	PSF                0x00000800     /* Pass Short Frames Enable                           */
+#define	RAF                0x00001000     /* Receive-All Mode                                   */
+#define	TE                 0x00010000     /* Transmitter Enable                                 */
+#define	DTXPAD             0x00020000     /* Disable Automatic TX Padding                       */
+#define	DTXCRC             0x00040000     /* Disable Automatic TX CRC Generation                */
+#define	DC                 0x00080000     /* Deferral Check                                     */
+#define	BOLMT              0x00300000     /* Back-Off Limit                                     */
+#define	BOLMT_10           0x00000000     /*		10-bit range                            */
+#define	BOLMT_8            0x00100000     /*		8-bit range                             */
+#define	BOLMT_4            0x00200000     /*		4-bit range                             */
+#define	BOLMT_1            0x00300000     /*		1-bit range                             */
+#define	DRTY               0x00400000     /* Disable TX Retry On Collision                      */
+#define	LCTRE              0x00800000     /* Enable TX Retry On Late Collision                  */
+#define	RMII               0x01000000     /* RMII/MII* Mode                                     */
+#define	RMII_10            0x02000000     /* Speed Select for RMII Port (10MBit/100MBit*)       */
+#define	FDMODE             0x04000000     /* Duplex Mode Enable (Full/Half*)                    */
+#define	LB                 0x08000000     /* Internal Loopback Enable                           */
+#define	DRO                0x10000000     /* Disable Receive Own Frames (Half-Duplex Mode)      */
+
+/* EMAC_STAADD Masks */
+
+#define	STABUSY            0x00000001     /* Initiate Station Mgt Reg Access / STA Busy Stat    */
+#define	STAOP              0x00000002     /* Station Management Operation Code (Write/Read*)    */
+#define	STADISPRE          0x00000004     /* Disable Preamble Generation                        */
+#define	STAIE              0x00000008     /* Station Mgt. Transfer Done Interrupt Enable        */
+#define	REGAD              0x000007C0     /* STA Register Address                               */
+#define	PHYAD              0x0000F800     /* PHY Device Address                                 */
+
+#define	SET_REGAD(x) (((x)&0x1F)<<  6 )   /* Set STA Register Address                           */
+#define	SET_PHYAD(x) (((x)&0x1F)<< 11 )   /* Set PHY Device Address                             */
+
+/* EMAC_STADAT Mask */
+
+#define	STADATA            0x0000FFFF     /* Station Management Data                            */
+
+/* EMAC_FLC Masks */
+
+#define	FLCBUSY            0x00000001     /* Send Flow Ctrl Frame / Flow Ctrl Busy Status       */
+#define	FLCE               0x00000002     /* Flow Control Enable                                */
+#define	PCF                0x00000004     /* Pass Control Frames                                */
+#define	BKPRSEN            0x00000008     /* Enable Backpressure                                */
+#define	FLCPAUSE           0xFFFF0000     /* Pause Time                                         */
+
+#define	SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time                                   */
+
+/* EMAC_WKUP_CTL Masks */
+
+#define	CAPWKFRM           0x00000001    /* Capture Wake-Up Frames                              */
+#define	MPKE               0x00000002    /* Magic Packet Enable                                 */
+#define	RWKE               0x00000004    /* Remote Wake-Up Frame Enable                         */
+#define	GUWKE              0x00000008    /* Global Unicast Wake Enable                          */
+#define	MPKS               0x00000020    /* Magic Packet Received Status                        */
+#define	RWKS               0x00000F00    /* Wake-Up Frame Received Status, Filters 3:0          */
+
+/* EMAC_WKUP_FFCMD Masks */
+
+#define	WF0_E              0x00000001    /* Enable Wake-Up Filter 0                              */
+#define	WF0_T              0x00000008    /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*)      */
+#define	WF1_E              0x00000100    /* Enable Wake-Up Filter 1                              */
+#define	WF1_T              0x00000800    /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*)      */
+#define	WF2_E              0x00010000    /* Enable Wake-Up Filter 2                              */
+#define	WF2_T              0x00080000    /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*)      */
+#define	WF3_E              0x01000000    /* Enable Wake-Up Filter 3                              */
+#define	WF3_T              0x08000000    /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*)      */
+
+/* EMAC_WKUP_FFOFF Masks */
+
+#define	WF0_OFF            0x000000FF    /* Wake-Up Filter 0 Pattern Offset                      */
+#define	WF1_OFF            0x0000FF00    /* Wake-Up Filter 1 Pattern Offset                      */
+#define	WF2_OFF            0x00FF0000    /* Wake-Up Filter 2 Pattern Offset                      */
+#define	WF3_OFF            0xFF000000    /* Wake-Up Filter 3 Pattern Offset                      */
+
+#define	SET_WF0_OFF(x) (((x)&0xFF)<<  0 ) /* Set Wake-Up Filter 0 Byte Offset                    */
+#define	SET_WF1_OFF(x) (((x)&0xFF)<<  8 ) /* Set Wake-Up Filter 1 Byte Offset                    */
+#define	SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset                    */
+#define	SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset                    */
+/* Set ALL Offsets */
+#define	SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
+
+/* EMAC_WKUP_FFCRC0 Masks */
+
+#define	WF0_CRC           0x0000FFFF    /* Wake-Up Filter 0 Pattern CRC                           */
+#define	WF1_CRC           0xFFFF0000    /* Wake-Up Filter 1 Pattern CRC                           */
+
+#define	SET_WF0_CRC(x) (((x)&0xFFFF)<<   0 ) /* Set Wake-Up Filter 0 Target CRC                   */
+#define	SET_WF1_CRC(x) (((x)&0xFFFF)<<  16 ) /* Set Wake-Up Filter 1 Target CRC                   */
+
+/* EMAC_WKUP_FFCRC1 Masks */
+
+#define	WF2_CRC           0x0000FFFF    /* Wake-Up Filter 2 Pattern CRC                           */
+#define	WF3_CRC           0xFFFF0000    /* Wake-Up Filter 3 Pattern CRC                           */
+
+#define	SET_WF2_CRC(x) (((x)&0xFFFF)<<   0 ) /* Set Wake-Up Filter 2 Target CRC                   */
+#define	SET_WF3_CRC(x) (((x)&0xFFFF)<<  16 ) /* Set Wake-Up Filter 3 Target CRC                   */
+
+/* EMAC_SYSCTL Masks */
+
+#define	PHYIE             0x00000001    /* PHY_INT Interrupt Enable                               */
+#define	RXDWA             0x00000002    /* Receive Frame DMA Word Alignment (Odd/Even*)           */
+#define	RXCKS             0x00000004    /* Enable RX Frame TCP/UDP Checksum Computation           */
+#define	TXDWA             0x00000010    /* Transmit Frame DMA Word Alignment (Odd/Even*)          */
+#define	MDCDIV            0x00003F00    /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))]            */
+
+#define	SET_MDCDIV(x) (((x)&0x3F)<< 8)   /* Set MDC Clock Divisor                                 */
+
+/* EMAC_SYSTAT Masks */
+
+#define	PHYINT            0x00000001    /* PHY_INT Interrupt Status                               */
+#define	MMCINT            0x00000002    /* MMC Counter Interrupt Status                           */
+#define	RXFSINT           0x00000004    /* RX Frame-Status Interrupt Status                       */
+#define	TXFSINT           0x00000008    /* TX Frame-Status Interrupt Status                       */
+#define	WAKEDET           0x00000010    /* Wake-Up Detected Status                                */
+#define	RXDMAERR          0x00000020    /* RX DMA Direction Error Status                          */
+#define	TXDMAERR          0x00000040    /* TX DMA Direction Error Status                          */
+#define	STMDONE           0x00000080    /* Station Mgt. Transfer Done Interrupt Status            */
+
+/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */
+
+#define	RX_FRLEN          0x000007FF    /* Frame Length In Bytes                                  */
+#define	RX_COMP           0x00001000    /* RX Frame Complete                                      */
+#define	RX_OK             0x00002000    /* RX Frame Received With No Errors                       */
+#define	RX_LONG           0x00004000    /* RX Frame Too Long Error                                */
+#define	RX_ALIGN          0x00008000    /* RX Frame Alignment Error                               */
+#define	RX_CRC            0x00010000    /* RX Frame CRC Error                                     */
+#define	RX_LEN            0x00020000    /* RX Frame Length Error                                  */
+#define	RX_FRAG           0x00040000    /* RX Frame Fragment Error                                */
+#define	RX_ADDR           0x00080000    /* RX Frame Address Filter Failed Error                   */
+#define	RX_DMAO           0x00100000    /* RX Frame DMA Overrun Error                             */
+#define	RX_PHY            0x00200000    /* RX Frame PHY Error                                     */
+#define	RX_LATE           0x00400000    /* RX Frame Late Collision Error                          */
+#define	RX_RANGE          0x00800000    /* RX Frame Length Field Out of Range Error               */
+#define	RX_MULTI          0x01000000    /* RX Multicast Frame Indicator                           */
+#define	RX_BROAD          0x02000000    /* RX Broadcast Frame Indicator                           */
+#define	RX_CTL            0x04000000    /* RX Control Frame Indicator                             */
+#define	RX_UCTL           0x08000000    /* Unsupported RX Control Frame Indicator                 */
+#define	RX_TYPE           0x10000000    /* RX Typed Frame Indicator                               */
+#define	RX_VLAN1          0x20000000    /* RX VLAN1 Frame Indicator                               */
+#define	RX_VLAN2          0x40000000    /* RX VLAN2 Frame Indicator                               */
+#define	RX_ACCEPT         0x80000000    /* RX Frame Accepted Indicator                            */
+
+/*  EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks  */
+
+#define	TX_COMP           0x00000001    /* TX Frame Complete                                      */
+#define	TX_OK             0x00000002    /* TX Frame Sent With No Errors                           */
+#define	TX_ECOLL          0x00000004    /* TX Frame Excessive Collision Error                     */
+#define	TX_LATE           0x00000008    /* TX Frame Late Collision Error                          */
+#define	TX_DMAU           0x00000010    /* TX Frame DMA Underrun Error (STAT)                     */
+#define	TX_MACE           0x00000010    /* Internal MAC Error Detected (STKY and IRQE)            */
+#define	TX_EDEFER         0x00000020    /* TX Frame Excessive Deferral Error                      */
+#define	TX_BROAD          0x00000040    /* TX Broadcast Frame Indicator                           */
+#define	TX_MULTI          0x00000080    /* TX Multicast Frame Indicator                           */
+#define	TX_CCNT           0x00000F00    /* TX Frame Collision Count                               */
+#define	TX_DEFER          0x00001000    /* TX Frame Deferred Indicator                            */
+#define	TX_CRS            0x00002000    /* TX Frame Carrier Sense Not Asserted Error              */
+#define	TX_LOSS           0x00004000    /* TX Frame Carrier Lost During TX Error                  */
+#define	TX_RETRY          0x00008000    /* TX Frame Successful After Retry                        */
+#define	TX_FRLEN          0x07FF0000    /* TX Frame Length (Bytes)                                */
+
+/* EMAC_MMC_CTL Masks */
+#define	RSTC              0x00000001    /* Reset All Counters                                     */
+#define	CROLL             0x00000002    /* Counter Roll-Over Enable                               */
+#define	CCOR              0x00000004    /* Counter Clear-On-Read Mode Enable                      */
+#define	MMCE              0x00000008    /* Enable MMC Counter Operation                           */
+
+/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */
+#define	RX_OK_CNT         0x00000001    /* RX Frames Received With No Errors                      */
+#define	RX_FCS_CNT        0x00000002    /* RX Frames W/Frame Check Sequence Errors                */
+#define	RX_ALIGN_CNT      0x00000004    /* RX Frames With Alignment Errors                        */
+#define	RX_OCTET_CNT      0x00000008    /* RX Octets Received OK                                  */
+#define	RX_LOST_CNT       0x00000010    /* RX Frames Lost Due To Internal MAC RX Error            */
+#define	RX_UNI_CNT        0x00000020    /* Unicast RX Frames Received OK                          */
+#define	RX_MULTI_CNT      0x00000040    /* Multicast RX Frames Received OK                        */
+#define	RX_BROAD_CNT      0x00000080    /* Broadcast RX Frames Received OK                        */
+#define	RX_IRL_CNT        0x00000100    /* RX Frames With In-Range Length Errors                  */
+#define	RX_ORL_CNT        0x00000200    /* RX Frames With Out-Of-Range Length Errors              */
+#define	RX_LONG_CNT       0x00000400    /* RX Frames With Frame Too Long Errors                   */
+#define	RX_MACCTL_CNT     0x00000800    /* MAC Control RX Frames Received                         */
+#define	RX_OPCODE_CTL     0x00001000    /* Unsupported Op-Code RX Frames Received                 */
+#define	RX_PAUSE_CNT      0x00002000    /* PAUSEMAC Control RX Frames Received                    */
+#define	RX_ALLF_CNT       0x00004000    /* All RX Frames Received                                 */
+#define	RX_ALLO_CNT       0x00008000    /* All RX Octets Received                                 */
+#define	RX_TYPED_CNT      0x00010000    /* Typed RX Frames Received                               */
+#define	RX_SHORT_CNT      0x00020000    /* RX Frame Fragments (< 64 Bytes) Received               */
+#define	RX_EQ64_CNT       0x00040000    /* 64-Byte RX Frames Received                             */
+#define	RX_LT128_CNT      0x00080000    /* 65-127-Byte RX Frames Received                         */
+#define	RX_LT256_CNT      0x00100000    /* 128-255-Byte RX Frames Received                        */
+#define	RX_LT512_CNT      0x00200000    /* 256-511-Byte RX Frames Received                        */
+#define	RX_LT1024_CNT     0x00400000    /* 512-1023-Byte RX Frames Received                       */
+#define	RX_GE1024_CNT     0x00800000    /* 1024-Max-Byte RX Frames Received                       */
+
+/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks  */
+
+#define	TX_OK_CNT         0x00000001    /* TX Frames Sent OK                                      */
+#define	TX_SCOLL_CNT      0x00000002    /* TX Frames With Single Collisions                       */
+#define	TX_MCOLL_CNT      0x00000004    /* TX Frames With Multiple Collisions                     */
+#define	TX_OCTET_CNT      0x00000008    /* TX Octets Sent OK                                      */
+#define	TX_DEFER_CNT      0x00000010    /* TX Frames With Deferred Transmission                   */
+#define	TX_LATE_CNT       0x00000020    /* TX Frames With Late Collisions                         */
+#define	TX_ABORTC_CNT     0x00000040    /* TX Frames Aborted Due To Excess Collisions             */
+#define	TX_LOST_CNT       0x00000080    /* TX Frames Lost Due To Internal MAC TX Error            */
+#define	TX_CRS_CNT        0x00000100    /* TX Frames With Carrier Sense Errors                    */
+#define	TX_UNI_CNT        0x00000200    /* Unicast TX Frames Sent                                 */
+#define	TX_MULTI_CNT      0x00000400    /* Multicast TX Frames Sent                               */
+#define	TX_BROAD_CNT      0x00000800    /* Broadcast TX Frames Sent                               */
+#define	TX_EXDEF_CTL      0x00001000    /* TX Frames With Excessive Deferral                      */
+#define	TX_MACCTL_CNT     0x00002000    /* MAC Control TX Frames Sent                             */
+#define	TX_ALLF_CNT       0x00004000    /* All TX Frames Sent                                     */
+#define	TX_ALLO_CNT       0x00008000    /* All TX Octets Sent                                     */
+#define	TX_EQ64_CNT       0x00010000    /* 64-Byte TX Frames Sent                                 */
+#define	TX_LT128_CNT      0x00020000    /* 65-127-Byte TX Frames Sent                             */
+#define	TX_LT256_CNT      0x00040000    /* 128-255-Byte TX Frames Sent                            */
+#define	TX_LT512_CNT      0x00080000    /* 256-511-Byte TX Frames Sent                            */
+#define	TX_LT1024_CNT     0x00100000    /* 512-1023-Byte TX Frames Sent                           */
+#define	TX_GE1024_CNT     0x00200000    /* 1024-Max-Byte TX Frames Sent                           */
+#define	TX_ABORT_CNT      0x00400000    /* TX Frames Aborted                                      */
+
+#endif /* _DEF_BF527_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/dma.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/dma.h
new file mode 100644
index 0000000..eb287da
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/dma.h
@@ -0,0 +1,38 @@
+/* mach/dma.h - arch-specific DMA defines
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define MAX_DMA_CHANNELS 16
+
+#define CH_PPI 			0	/* PPI receive/transmit or NFC */
+#define CH_EMAC_RX 		1	/* Ethernet MAC receive or HOSTDP */
+#define CH_EMAC_HOSTDP 		1	/* Ethernet MAC receive or HOSTDP */
+#define CH_EMAC_TX 		2	/* Ethernet MAC transmit or NFC */
+#define CH_SPORT0_RX 		3	/* SPORT0 receive */
+#define CH_SPORT0_TX 		4	/* SPORT0 transmit */
+#define CH_SPORT1_RX 		5	/* SPORT1 receive */
+#define CH_SPORT1_TX 		6	/* SPORT1 transmit */
+#define CH_SPI 			7	/* SPI transmit/receive */
+#define CH_UART0_RX 		8	/* UART0 receive */
+#define CH_UART0_TX 		9	/* UART0 transmit */
+#define CH_UART1_RX 		10	/* UART1 receive */
+#define CH_UART1_TX 		11	/* UART1 transmit */
+
+#define CH_MEM_STREAM0_DEST	12	/* TX */
+#define CH_MEM_STREAM0_SRC  	13	/* RX */
+#define CH_MEM_STREAM1_DEST	14	/* TX */
+#define CH_MEM_STREAM1_SRC 	15	/* RX */
+
+#if defined(CONFIG_BF527_NAND_D_PORTF)
+#define CH_NFC			CH_PPI	/* PPI receive/transmit or NFC */
+#elif defined(CONFIG_BF527_NAND_D_PORTH)
+#define CH_NFC			CH_EMAC_TX /* PPI receive/transmit or NFC */
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/gpio.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/gpio.h
new file mode 100644
index 0000000..fba606b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/gpio.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define MAX_BLACKFIN_GPIOS 48
+
+#define GPIO_PF0	0
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+#define GPIO_PG0	16
+#define GPIO_PG1	17
+#define GPIO_PG2	18
+#define GPIO_PG3	19
+#define GPIO_PG4	20
+#define GPIO_PG5	21
+#define GPIO_PG6	22
+#define GPIO_PG7	23
+#define GPIO_PG8	24
+#define GPIO_PG9	25
+#define GPIO_PG10	26
+#define GPIO_PG11	27
+#define GPIO_PG12	28
+#define GPIO_PG13	29
+#define GPIO_PG14	30
+#define GPIO_PG15	31
+#define GPIO_PH0	32
+#define GPIO_PH1	33
+#define GPIO_PH2	34
+#define GPIO_PH3	35
+#define GPIO_PH4	36
+#define GPIO_PH5	37
+#define GPIO_PH6	38
+#define GPIO_PH7	39
+#define GPIO_PH8	40
+#define GPIO_PH9	41
+#define GPIO_PH10	42
+#define GPIO_PH11	43
+#define GPIO_PH12	44
+#define GPIO_PH13	45
+#define GPIO_PH14	46
+#define GPIO_PH15	47
+
+#define PORT_F GPIO_PF0
+#define PORT_G GPIO_PG0
+#define PORT_H GPIO_PH0
+
+#include <mach-common/ports-f.h>
+#include <mach-common/ports-g.h>
+#include <mach-common/ports-h.h>
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/irq.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/irq.h
new file mode 100644
index 0000000..ed7310f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/irq.h
@@ -0,0 +1,204 @@
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _BF527_IRQ_H_
+#define _BF527_IRQ_H_
+
+#include <mach-common/irq.h>
+
+#define NR_PERI_INTS		(2 * 32)
+
+#define IRQ_PLL_WAKEUP		BFIN_IRQ(0)	/* PLL Wakeup Interrupt */
+#define IRQ_DMA0_ERROR		BFIN_IRQ(1)	/* DMA Error 0 (generic) */
+#define IRQ_DMAR0_BLK		BFIN_IRQ(2)	/* DMAR0 Block Interrupt */
+#define IRQ_DMAR1_BLK		BFIN_IRQ(3)	/* DMAR1 Block Interrupt */
+#define IRQ_DMAR0_OVR		BFIN_IRQ(4)	/* DMAR0 Overflow Error */
+#define IRQ_DMAR1_OVR		BFIN_IRQ(5)	/* DMAR1 Overflow Error */
+#define IRQ_PPI_ERROR		BFIN_IRQ(6)	/* PPI Error */
+#define IRQ_MAC_ERROR		BFIN_IRQ(7)	/* MAC Status */
+#define IRQ_SPORT0_ERROR	BFIN_IRQ(8)	/* SPORT0 Status */
+#define IRQ_SPORT1_ERROR	BFIN_IRQ(9)	/* SPORT1 Status */
+#define IRQ_UART0_ERROR		BFIN_IRQ(12)	/* UART0 Status */
+#define IRQ_UART1_ERROR		BFIN_IRQ(13)	/* UART1 Status */
+#define IRQ_RTC			BFIN_IRQ(14)	/* RTC */
+#define IRQ_PPI			BFIN_IRQ(15)	/* DMA Channel 0 (PPI/NAND) */
+#define IRQ_SPORT0_RX		BFIN_IRQ(16)	/* DMA 3 Channel (SPORT0 RX) */
+#define IRQ_SPORT0_TX		BFIN_IRQ(17)	/* DMA 4 Channel (SPORT0 TX) */
+#define IRQ_SPORT1_RX		BFIN_IRQ(18)	/* DMA 5 Channel (SPORT1 RX) */
+#define IRQ_SPORT1_TX		BFIN_IRQ(19)	/* DMA 6 Channel (SPORT1 TX) */
+#define IRQ_TWI			BFIN_IRQ(20)	/* TWI */
+#define IRQ_SPI			BFIN_IRQ(21)	/* DMA 7 Channel (SPI) */
+#define IRQ_UART0_RX		BFIN_IRQ(22)	/* DMA8 Channel (UART0 RX) */
+#define IRQ_UART0_TX		BFIN_IRQ(23)	/* DMA9 Channel (UART0 TX) */
+#define IRQ_UART1_RX		BFIN_IRQ(24)	/* DMA10 Channel (UART1 RX) */
+#define IRQ_UART1_TX		BFIN_IRQ(25)	/* DMA11 Channel (UART1 TX) */
+#define IRQ_OPTSEC		BFIN_IRQ(26)	/* OTPSEC Interrupt */
+#define IRQ_CNT			BFIN_IRQ(27)	/* GP Counter */
+#define IRQ_MAC_RX		BFIN_IRQ(28)	/* DMA1 Channel (MAC RX/HDMA) */
+#define IRQ_PORTH_INTA		BFIN_IRQ(29)	/* Port H Interrupt A */
+#define IRQ_MAC_TX		BFIN_IRQ(30)	/* DMA2 Channel (MAC TX/NAND) */
+#define IRQ_NFC			BFIN_IRQ(30)	/* DMA2 Channel (MAC TX/NAND) */
+#define IRQ_PORTH_INTB		BFIN_IRQ(31)	/* Port H Interrupt B */
+#define IRQ_TIMER0		BFIN_IRQ(32)	/* Timer 0 */
+#define IRQ_TIMER1		BFIN_IRQ(33)	/* Timer 1 */
+#define IRQ_TIMER2		BFIN_IRQ(34)	/* Timer 2 */
+#define IRQ_TIMER3		BFIN_IRQ(35)	/* Timer 3 */
+#define IRQ_TIMER4		BFIN_IRQ(36)	/* Timer 4 */
+#define IRQ_TIMER5		BFIN_IRQ(37)	/* Timer 5 */
+#define IRQ_TIMER6		BFIN_IRQ(38)	/* Timer 6 */
+#define IRQ_TIMER7		BFIN_IRQ(39)	/* Timer 7 */
+#define IRQ_PORTG_INTA		BFIN_IRQ(40)	/* Port G Interrupt A */
+#define IRQ_PORTG_INTB		BFIN_IRQ(41)	/* Port G Interrupt B */
+#define IRQ_MEM_DMA0		BFIN_IRQ(42)	/* MDMA Stream 0 */
+#define IRQ_MEM_DMA1		BFIN_IRQ(43)	/* MDMA Stream 1 */
+#define IRQ_WATCH		BFIN_IRQ(44)	/* Software Watchdog Timer */
+#define IRQ_PORTF_INTA		BFIN_IRQ(45)	/* Port F Interrupt A */
+#define IRQ_PORTF_INTB		BFIN_IRQ(46)	/* Port F Interrupt B */
+#define IRQ_SPI_ERROR		BFIN_IRQ(47)	/* SPI Status */
+#define IRQ_NFC_ERROR		BFIN_IRQ(48)	/* NAND Error */
+#define IRQ_HDMA_ERROR		BFIN_IRQ(49)	/* HDMA Error */
+#define IRQ_HDMA		BFIN_IRQ(50)	/* HDMA (TFI) */
+#define IRQ_USB_EINT		BFIN_IRQ(51)	/* USB_EINT Interrupt */
+#define IRQ_USB_INT0		BFIN_IRQ(52)	/* USB_INT0 Interrupt */
+#define IRQ_USB_INT1		BFIN_IRQ(53)	/* USB_INT1 Interrupt */
+#define IRQ_USB_INT2		BFIN_IRQ(54)	/* USB_INT2 Interrupt */
+#define IRQ_USB_DMA		BFIN_IRQ(55)	/* USB_DMAINT Interrupt */
+
+#define SYS_IRQS		BFIN_IRQ(63)	/* 70 */
+
+#define IRQ_PF0			71
+#define IRQ_PF1			72
+#define IRQ_PF2			73
+#define IRQ_PF3			74
+#define IRQ_PF4			75
+#define IRQ_PF5			76
+#define IRQ_PF6			77
+#define IRQ_PF7			78
+#define IRQ_PF8			79
+#define IRQ_PF9			80
+#define IRQ_PF10		81
+#define IRQ_PF11		82
+#define IRQ_PF12		83
+#define IRQ_PF13		84
+#define IRQ_PF14		85
+#define IRQ_PF15		86
+
+#define IRQ_PG0			87
+#define IRQ_PG1			88
+#define IRQ_PG2			89
+#define IRQ_PG3			90
+#define IRQ_PG4			91
+#define IRQ_PG5			92
+#define IRQ_PG6			93
+#define IRQ_PG7			94
+#define IRQ_PG8			95
+#define IRQ_PG9			96
+#define IRQ_PG10		97
+#define IRQ_PG11		98
+#define IRQ_PG12		99
+#define IRQ_PG13		100
+#define IRQ_PG14		101
+#define IRQ_PG15		102
+
+#define IRQ_PH0			103
+#define IRQ_PH1			104
+#define IRQ_PH2			105
+#define IRQ_PH3			106
+#define IRQ_PH4			107
+#define IRQ_PH5			108
+#define IRQ_PH6			109
+#define IRQ_PH7			110
+#define IRQ_PH8			111
+#define IRQ_PH9			112
+#define IRQ_PH10		113
+#define IRQ_PH11		114
+#define IRQ_PH12		115
+#define IRQ_PH13		116
+#define IRQ_PH14		117
+#define IRQ_PH15		118
+
+#define GPIO_IRQ_BASE		IRQ_PF0
+
+#define IRQ_MAC_PHYINT		119	/* PHY_INT Interrupt */
+#define IRQ_MAC_MMCINT		120	/* MMC Counter Interrupt */
+#define IRQ_MAC_RXFSINT		121	/* RX Frame-Status Interrupt */
+#define IRQ_MAC_TXFSINT		122	/* TX Frame-Status Interrupt */
+#define IRQ_MAC_WAKEDET		123	/* Wake-Up Interrupt */
+#define IRQ_MAC_RXDMAERR	124	/* RX DMA Direction Error Interrupt */
+#define IRQ_MAC_TXDMAERR	125	/* TX DMA Direction Error Interrupt */
+#define IRQ_MAC_STMDONE		126	/* Station Mgt. Transfer Done Interrupt */
+
+#define NR_MACH_IRQS		(IRQ_MAC_STMDONE + 1)
+
+/* IAR0 BIT FIELDS */
+#define IRQ_PLL_WAKEUP_POS	0
+#define IRQ_DMA0_ERROR_POS	4
+#define IRQ_DMAR0_BLK_POS	8
+#define IRQ_DMAR1_BLK_POS	12
+#define IRQ_DMAR0_OVR_POS	16
+#define IRQ_DMAR1_OVR_POS	20
+#define IRQ_PPI_ERROR_POS	24
+#define IRQ_MAC_ERROR_POS	28
+
+/* IAR1 BIT FIELDS */
+#define IRQ_SPORT0_ERROR_POS	0
+#define IRQ_SPORT1_ERROR_POS	4
+#define IRQ_UART0_ERROR_POS	16
+#define IRQ_UART1_ERROR_POS	20
+#define IRQ_RTC_POS		24
+#define IRQ_PPI_POS		28
+
+/* IAR2 BIT FIELDS */
+#define IRQ_SPORT0_RX_POS	0
+#define IRQ_SPORT0_TX_POS	4
+#define IRQ_SPORT1_RX_POS	8
+#define IRQ_SPORT1_TX_POS	12
+#define IRQ_TWI_POS		16
+#define IRQ_SPI_POS		20
+#define IRQ_UART0_RX_POS	24
+#define IRQ_UART0_TX_POS	28
+
+/* IAR3 BIT FIELDS */
+#define IRQ_UART1_RX_POS	0
+#define IRQ_UART1_TX_POS	4
+#define IRQ_OPTSEC_POS		8
+#define IRQ_CNT_POS		12
+#define IRQ_MAC_RX_POS		16
+#define IRQ_PORTH_INTA_POS	20
+#define IRQ_MAC_TX_POS		24
+#define IRQ_PORTH_INTB_POS	28
+
+/* IAR4 BIT FIELDS */
+#define IRQ_TIMER0_POS		0
+#define IRQ_TIMER1_POS		4
+#define IRQ_TIMER2_POS		8
+#define IRQ_TIMER3_POS		12
+#define IRQ_TIMER4_POS		16
+#define IRQ_TIMER5_POS		20
+#define IRQ_TIMER6_POS		24
+#define IRQ_TIMER7_POS		28
+
+/* IAR5 BIT FIELDS */
+#define IRQ_PORTG_INTA_POS	0
+#define IRQ_PORTG_INTB_POS	4
+#define IRQ_MEM_DMA0_POS	8
+#define IRQ_MEM_DMA1_POS	12
+#define IRQ_WATCH_POS		16
+#define IRQ_PORTF_INTA_POS	20
+#define IRQ_PORTF_INTB_POS	24
+#define IRQ_SPI_ERROR_POS	28
+
+/* IAR6 BIT FIELDS */
+#define IRQ_NFC_ERROR_POS	0
+#define IRQ_HDMA_ERROR_POS	4
+#define IRQ_HDMA_POS		8
+#define IRQ_USB_EINT_POS	12
+#define IRQ_USB_INT0_POS	16
+#define IRQ_USB_INT1_POS	20
+#define IRQ_USB_INT2_POS	24
+#define IRQ_USB_DMA_POS		28
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/mem_map.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/mem_map.h
new file mode 100644
index 0000000..d96e894
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/mem_map.h
@@ -0,0 +1,70 @@
+/*
+ * BF52x memory map
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
+
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0x20300000	/* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK2_BASE	0x20200000	/* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK1_BASE	0x20100000	/* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK0_BASE	0x20000000	/* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x00100000	/* 1M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x8000
+
+/* Level 1 Memory */
+
+/* Memory Map for ADSP-BF527 ADSP-BF525 ADSP-BF522 processors */
+
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
+#else
+#define BFIN_ICACHESIZE	(0*1024)
+#endif
+
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#define L1_CODE_LENGTH      0xC000
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif				/*CONFIG_BFIN_DCACHE */
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/pll.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/pll.h
new file mode 100644
index 0000000..94cca67
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/pll.h
@@ -0,0 +1 @@
+#include <mach-common/pll.h>
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/portmux.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/portmux.h
new file mode 100644
index 0000000..08bae42
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/include/mach/portmux.h
@@ -0,0 +1,220 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
+
+#define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
+#define P_PPI0_D1	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
+#define P_PPI0_D2	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
+#define P_PPI0_D3	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0))
+#define P_PPI0_D4	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0))
+#define P_PPI0_D5	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0))
+#define P_PPI0_D6	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0))
+#define P_PPI0_D7	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
+#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0))
+#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0))
+#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0))
+#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0))
+#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0))
+#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
+#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
+#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
+
+#if defined(CONFIG_BF527_SPORT0_PORTF)
+#define P_SPORT0_DRPRI	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+#define P_SPORT0_RFS	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+#define P_SPORT0_RSCLK	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+#define P_SPORT0_DTPRI	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+#define P_SPORT0_TFS	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+#define P_SPORT0_DTSEC	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+#define P_SPORT0_DRSEC	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+#elif defined(CONFIG_BF527_SPORT0_PORTG)
+#define P_SPORT0_DTPRI	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_SPORT0_DRSEC	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1))
+#define P_SPORT0_DTSEC	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
+#define P_SPORT0_DRPRI	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1))
+#define P_SPORT0_RFS	(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1))
+#define P_SPORT0_RSCLK	(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1))
+#if defined(CONFIG_BF527_SPORT0_TSCLK_PG10)
+#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1))
+#elif defined(CONFIG_BF527_SPORT0_TSCLK_PG14)
+#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
+#endif
+#define P_SPORT0_TFS	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
+#endif
+
+#define P_SPORT1_DRPRI	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+#define P_SPORT1_RSCLK	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+#define P_SPORT1_RFS	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
+#define P_SPORT1_TFS	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
+#define P_SPORT1_DTPRI	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
+#define P_SPORT1_TSCLK	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
+#define P_SPORT1_DTSEC	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+#define P_SPORT1_DRSEC	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+
+#define P_SPI0_SSEL6	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(2))
+#define P_SPI0_SSEL7	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(2))
+
+#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(2))
+#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(2))
+
+#if defined(CONFIG_BF527_UART1_PORTF)
+#define P_UART1_TX	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(2))
+#define P_UART1_RX	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(2))
+#elif defined(CONFIG_BF527_UART1_PORTG)
+#define P_UART1_TX	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1))
+#define P_UART1_RX	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1))
+#endif
+
+#define P_CNT_CZM	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(3))
+#define P_CNT_CDG	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(3))
+#define P_CNT_CUD	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(3))
+
+#define P_HWAIT		(P_DONTCARE)
+
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PG1
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
+
+#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2))
+#define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2))
+#define P_SPI0_MISO	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2))
+#define P_SPI0_MOSI	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(2))
+#define P_TMR1		(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_PPI0_FS2	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_TMR3		(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0))
+#define P_TMR4		(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0))
+#define P_TMR5		(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0))
+#define P_TMR6		(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0))
+/* #define P_TMR7		(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0)) */
+#define P_DMAR1		(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0))
+#define P_DMAR0		(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
+#define P_TMR2		(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1))
+#define P_TMR7		(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_MDC		(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1))
+#define P_RMII0_MDINT	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1))
+#define P_MII0_PHYINT	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1))
+
+#define P_PPI0_FS3	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2))
+#define P_UART0_TX	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2))
+#define P_UART0_RX	(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(2))
+
+#define P_HOST_WR	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2))
+#define P_HOST_ACK	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2))
+#define P_HOST_ADDR	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2))
+#define P_HOST_RD	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(2))
+#define P_HOST_CE	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2))
+
+#if defined(CONFIG_BF527_NAND_D_PORTF)
+#define P_NAND_D0	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(2))
+#define P_NAND_D1	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(2))
+#define P_NAND_D2	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(2))
+#define P_NAND_D3	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(2))
+#define P_NAND_D4	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(2))
+#define P_NAND_D5	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(2))
+#define P_NAND_D6	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(2))
+#define P_NAND_D7	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(2))
+#elif defined(CONFIG_BF527_NAND_D_PORTH)
+#define P_NAND_D0	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0))
+#define P_NAND_D1	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0))
+#define P_NAND_D2	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0))
+#define P_NAND_D3	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0))
+#define P_NAND_D4	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0))
+#define P_NAND_D5	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0))
+#define P_NAND_D6	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0))
+#define P_NAND_D7	(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0))
+#endif
+
+#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0))
+#define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0))
+#define P_NAND_CE	(P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0))
+#define P_NAND_WE	(P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0))
+#define P_NAND_RE	(P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0))
+#define P_NAND_RB	(P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0))
+#define P_NAND_CLE	(P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(0))
+#define P_NAND_ALE	(P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(0))
+
+#define P_HOST_D0	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(2))
+#define P_HOST_D1	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(2))
+#define P_HOST_D2	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(2))
+#define P_HOST_D3	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(2))
+#define P_HOST_D4	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2))
+#define P_HOST_D5	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(2))
+#define P_HOST_D6	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(2))
+#define P_HOST_D7	(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(2))
+#define P_HOST_D8	(P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(2))
+#define P_HOST_D9	(P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(2))
+#define P_HOST_D10	(P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(2))
+#define P_HOST_D11	(P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(2))
+#define P_HOST_D12	(P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(2))
+#define P_HOST_D13	(P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(2))
+#define P_HOST_D14	(P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(2))
+#define P_HOST_D15	(P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(2))
+
+#define P_MII0_ETxD0	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1))
+#define P_MII0_ETxD1	(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(1))
+#define P_MII0_ETxD2	(P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(1))
+#define P_MII0_ETxD3	(P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(1))
+#define P_MII0_ETxEN	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(1))
+#define P_MII0_TxCLK	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1))
+#define P_MII0_COL	(P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(1))
+#define P_MII0_ERxD0	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1))
+#define P_MII0_ERxD1	(P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(1))
+#define P_MII0_ERxD2	(P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(1))
+#define P_MII0_ERxD3	(P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(1))
+#define P_MII0_ERxDV	(P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(1))
+#define P_MII0_ERxCLK	(P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(1))
+#define P_MII0_ERxER	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1))
+#define P_MII0_CRS	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1))
+#define P_RMII0_REF_CLK	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1))
+#define P_RMII0_CRS_DV	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1))
+#define P_MDIO		(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1))
+
+#define P_TWI0_SCL	(P_DONTCARE)
+#define P_TWI0_SDA	(P_DONTCARE)
+#define P_PPI0_FS1	(P_DONTCARE)
+#define P_TMR0		(P_DONTCARE)
+#define P_TMRCLK	(P_DONTCARE)
+#define P_PPI0_CLK	(P_DONTCARE)
+
+#define P_MII0 {\
+	P_MII0_ETxD0, \
+	P_MII0_ETxD1, \
+	P_MII0_ETxD2, \
+	P_MII0_ETxD3, \
+	P_MII0_ETxEN, \
+	P_MII0_TxCLK, \
+	P_MII0_PHYINT, \
+	P_MII0_COL, \
+	P_MII0_ERxD0, \
+	P_MII0_ERxD1, \
+	P_MII0_ERxD2, \
+	P_MII0_ERxD3, \
+	P_MII0_ERxDV, \
+	P_MII0_ERxCLK, \
+	P_MII0_ERxER, \
+	P_MII0_CRS, \
+	P_MDC, \
+	P_MDIO, 0}
+
+#define P_RMII0 {\
+	P_MII0_ETxD0, \
+	P_MII0_ETxD1, \
+	P_MII0_ETxEN, \
+	P_MII0_ERxD0, \
+	P_MII0_ERxD1, \
+	P_MII0_ERxER, \
+	P_RMII0_REF_CLK, \
+	P_RMII0_MDINT, \
+	P_RMII0_CRS_DV, \
+	P_MDC, \
+	P_MDIO, 0}
+
+#endif				/* _MACH_PORTMUX_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/ints-priority.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/ints-priority.c
new file mode 100644
index 0000000..44ca215
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf527/ints-priority.c
@@ -0,0 +1,79 @@
+/*
+ * Set up the interrupt priorities
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <asm/blackfin.h>
+
+void __init program_IAR(void)
+{
+	/* Program the IAR0 Register with the configured priority */
+	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
+			((CONFIG_IRQ_DMA0_ERROR - 7) << IRQ_DMA0_ERROR_POS) |
+			((CONFIG_IRQ_DMAR0_BLK - 7) << IRQ_DMAR0_BLK_POS) |
+			((CONFIG_IRQ_DMAR1_BLK - 7) << IRQ_DMAR1_BLK_POS) |
+			((CONFIG_IRQ_DMAR0_OVR - 7) << IRQ_DMAR0_OVR_POS) |
+			((CONFIG_IRQ_DMAR1_OVR - 7) << IRQ_DMAR1_OVR_POS) |
+			((CONFIG_IRQ_PPI_ERROR - 7) << IRQ_PPI_ERROR_POS) |
+			((CONFIG_IRQ_MAC_ERROR - 7) << IRQ_MAC_ERROR_POS));
+
+
+	bfin_write_SIC_IAR1(((CONFIG_IRQ_SPORT0_ERROR - 7) << IRQ_SPORT0_ERROR_POS) |
+			((CONFIG_IRQ_SPORT1_ERROR - 7) << IRQ_SPORT1_ERROR_POS) |
+			((CONFIG_IRQ_UART0_ERROR - 7) << IRQ_UART0_ERROR_POS) |
+			((CONFIG_IRQ_UART1_ERROR - 7) << IRQ_UART1_ERROR_POS) |
+			((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS) |
+			((CONFIG_IRQ_PPI - 7) << IRQ_PPI_POS));
+
+	bfin_write_SIC_IAR2(((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) |
+			((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) |
+			((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS) |
+			((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) |
+			((CONFIG_IRQ_TWI - 7) << IRQ_TWI_POS) |
+			((CONFIG_IRQ_SPI - 7) << IRQ_SPI_POS) |
+			((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) |
+			((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS));
+
+	bfin_write_SIC_IAR3(((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) |
+			((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) |
+			((CONFIG_IRQ_OPTSEC - 7) << IRQ_OPTSEC_POS) |
+			((CONFIG_IRQ_CNT - 7) << IRQ_CNT_POS) |
+			((CONFIG_IRQ_MAC_RX - 7) << IRQ_MAC_RX_POS) |
+			((CONFIG_IRQ_PORTH_INTA - 7) << IRQ_PORTH_INTA_POS) |
+			((CONFIG_IRQ_MAC_TX - 7) << IRQ_MAC_TX_POS) |
+			((CONFIG_IRQ_PORTH_INTB - 7) << IRQ_PORTH_INTB_POS));
+
+	bfin_write_SIC_IAR4(((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
+			((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) |
+			((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
+			((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
+			((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS) |
+			((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
+			((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
+			((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS));
+
+	bfin_write_SIC_IAR5(((CONFIG_IRQ_PORTG_INTA - 7) << IRQ_PORTG_INTA_POS) |
+			((CONFIG_IRQ_PORTG_INTB - 7) << IRQ_PORTG_INTB_POS) |
+			((CONFIG_IRQ_MEM_DMA0 - 7) << IRQ_MEM_DMA0_POS) |
+			((CONFIG_IRQ_MEM_DMA1 - 7) << IRQ_MEM_DMA1_POS) |
+			((CONFIG_IRQ_WATCH - 7) << IRQ_WATCH_POS) |
+			((CONFIG_IRQ_PORTF_INTA - 7) << IRQ_PORTF_INTA_POS) |
+			((CONFIG_IRQ_PORTF_INTB - 7) << IRQ_PORTF_INTB_POS) |
+			((CONFIG_IRQ_SPI_ERROR - 7) << IRQ_SPI_ERROR_POS));
+
+	bfin_write_SIC_IAR6(((CONFIG_IRQ_NFC_ERROR - 7) << IRQ_NFC_ERROR_POS) |
+			((CONFIG_IRQ_HDMA_ERROR - 7) << IRQ_HDMA_ERROR_POS) |
+			((CONFIG_IRQ_HDMA - 7) << IRQ_HDMA_POS) |
+			((CONFIG_IRQ_USB_EINT - 7) << IRQ_USB_EINT_POS) |
+			((CONFIG_IRQ_USB_INT0 - 7) << IRQ_USB_INT0_POS) |
+			((CONFIG_IRQ_USB_INT1 - 7) << IRQ_USB_INT1_POS) |
+			((CONFIG_IRQ_USB_INT2 - 7) << IRQ_USB_INT2_POS) |
+			((CONFIG_IRQ_USB_DMA - 7) << IRQ_USB_DMA_POS));
+
+	SSYNC();
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/Kconfig
new file mode 100644
index 0000000..4e1a05b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/Kconfig
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0
+if (BF533 || BF532 || BF531)
+
+source "arch/blackfin/mach-bf533/boards/Kconfig"
+
+menu "BF533/2/1 Specific Configuration"
+
+comment "Interrupt Priority Assignment"
+menu "Priority"
+
+config UART_ERROR
+	int "UART ERROR"
+	default 7
+config SPORT0_ERROR
+	int "SPORT0 ERROR"
+	default 7
+config SPI_ERROR
+	int "SPI ERROR"
+	default 7
+config SPORT1_ERROR
+	int "SPORT1 ERROR"
+	default 7
+config PPI_ERROR
+	int "PPI ERROR"
+	default 7
+config DMA_ERROR
+	int "DMA ERROR"
+	default 7
+config PLLWAKE_ERROR
+	int "PLL WAKEUP ERROR"
+	default 7
+
+config RTC_ERROR
+	int "RTC ERROR"
+	default 8
+config DMA0_PPI
+	int "DMA0 PPI"
+	default 8
+
+config DMA1_SPORT0RX
+	int "DMA1 (SPORT0 RX)"
+	default 9
+config DMA2_SPORT0TX
+	int "DMA2 (SPORT0 TX)"
+	default 9
+config DMA3_SPORT1RX
+	int "DMA3 (SPORT1 RX)"
+	default 9
+config DMA4_SPORT1TX
+	int "DMA4 (SPORT1 TX)"
+	default 9
+config DMA5_SPI
+	int "DMA5 (SPI)"
+	default 10
+config DMA6_UARTRX
+	int "DMA6 (UART0 RX)"
+	default 10
+config DMA7_UARTTX
+	int "DMA7 (UART0 TX)"
+	default 10
+config TIMER0
+	int "TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
+	default 8
+config TIMER1
+	int "TIMER1"
+	default 11
+config TIMER2
+	int "TIMER2"
+	default 11
+config PFA
+	int "PF Interrupt A"
+	default 12
+config PFB
+	int "PF Interrupt B"
+	default 12
+config MEMDMA0
+	int "MEMORY DMA0"
+	default 13
+config MEMDMA1
+	int "MEMORY DMA1"
+	default 13
+config WDTIMER
+	int "WATCH DOG TIMER"
+	default 13
+
+	help
+	  Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
+	  This applies to all the above.  It is not recommended to assign the
+	  highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/Makefile
new file mode 100644
index 0000000..874840f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/Makefile
@@ -0,0 +1,5 @@
+#
+# arch/blackfin/mach-bf533/Makefile
+#
+
+obj-y := ints-priority.o dma.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/H8606.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/H8606.c
new file mode 100644
index 0000000..01300f4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/H8606.c
@@ -0,0 +1,452 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2007-2008 HV Sistemas S.L.
+ *                      Javier Herrero <jherrero@hvsistemas.es>
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/irq.h>
+
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/portmux.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "HV Sistemas H8606";
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+/*
+*  Driver needs to know address, irq and flag pin.
+ */
+#if IS_ENABLED(CONFIG_DM9000)
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= 0x20300000,
+		.end	= 0x20300002,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0x20300004,
+		.end	= 0x20300006,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_PF10,
+		.end	= IRQ_PF10,
+		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		           IORESOURCE_IRQ_SHAREABLE),
+	},
+};
+
+static struct platform_device dm9000_device = {
+    .id			= 0,
+    .name		= "dm9000",
+    .resource		= dm9000_resources,
+    .num_resources	= ARRAY_SIZE(dm9000_resources),
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PROG_INTB,
+		.end = IRQ_PROG_INTB,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	}, {
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF10,
+		.end = IRQ_PF10,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* all SPI peripherals info goes here */
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader (spi)",
+		.size = 0x40000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "fpga (spi)",
+		.size =   0x30000,
+		.offset = 0x40000
+	}, {
+		.name = "linux kernel (spi)",
+		.size =   0x150000,
+		.offset =  0x70000
+	}, {
+		.name = "jffs2 root file system (spi)",
+		.size =   0x640000,
+		.offset = 0x1c0000,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+/* Notice: for blackfin, the speed_hz is the value of register
+ * SPI_BAUD, not the real baudrate */
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		/* this value is the baudrate divisor */
+		.max_speed_hz = 50000000, /* actual baudrate is SCLK/(2xspeed_hz) */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 16,
+		.bus_num = 1,
+		.chip_select = 4,
+	},
+#endif
+
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_8250)
+
+#include <linux/serial_8250.h>
+#include <linux/serial.h>
+
+/*
+ * Configuration for two 16550 UARTS in FPGA at addresses 0x20200000 and 0x202000010.
+ * running at half system clock, both with interrupt output or-ed to PF8. Change to
+ * suit different FPGA configuration, or to suit real 16550 UARTS connected to the bus
+ */
+
+static struct plat_serial8250_port serial8250_platform_data [] = {
+	{
+		.membase = (void *)0x20200000,
+		.mapbase = 0x20200000,
+		.irq = IRQ_PF8,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
+		.iotype = UPIO_MEM,
+		.regshift = 1,
+		.uartclk = 66666667,
+	}, {
+		.membase = (void *)0x20200010,
+		.mapbase = 0x20200010,
+		.irq = IRQ_PF8,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
+		.iotype = UPIO_MEM,
+		.regshift = 1,
+		.uartclk = 66666667,
+	}, {
+	}
+};
+
+static struct platform_device serial8250_device = {
+	.id		= PLAT8250_DEV_PLATFORM,
+	.name		= "serial8250",
+	.dev		= {
+		.platform_data = serial8250_platform_data,
+	},
+};
+
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES)
+
+/*
+ * Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030,
+ * interrupt output wired to PF9. Change to suit different FPGA configuration
+ */
+
+static struct resource opencores_kbd_resources[] = {
+	[0] = {
+		.start	= 0x20200030,
+		.end	= 0x20300030 + 2,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PF9,
+		.end	= IRQ_PF9,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct platform_device opencores_kbd_device = {
+	.id		= -1,
+	.name		= "opencores-kbd",
+	.resource	= opencores_kbd_resources,
+	.num_resources	= ARRAY_SIZE(opencores_kbd_resources),
+};
+#endif
+
+static struct platform_device *h8606_devices[] __initdata = {
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_DM9000)
+	&dm9000_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	&smc91x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	&net2272_bfin_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_8250)
+	&serial8250_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES)
+	&opencores_kbd_device,
+#endif
+};
+
+static int __init H8606_init(void)
+{
+	printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n");
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices));
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+	return 0;
+}
+
+arch_initcall(H8606_init);
+
+static struct platform_device *H8606_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(H8606_early_devices,
+		ARRAY_SIZE(H8606_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/Kconfig
new file mode 100644
index 0000000..3fde0df
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/Kconfig
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+choice
+	prompt "System type"
+	default BFIN533_STAMP
+	help
+	  Select your board!
+
+config BFIN533_EZKIT
+	bool "BF533-EZKIT"
+	help
+	  BF533-EZKIT-LITE board support.
+
+config BFIN533_STAMP
+	bool "BF533-STAMP"
+	help
+	  BF533-STAMP board support.
+
+config BLACKSTAMP
+	bool "BlackStamp"
+	help
+	  Support for the BlackStamp board.  Hardware info available at
+	  http://blackfin.uclinux.org/gf/project/blackstamp/
+
+config BFIN533_BLUETECHNIX_CM
+	bool "Bluetechnix CM-BF533"
+	depends on (BF533)
+	help
+	  CM-BF533 support for EVAL- and DEV-Board.
+
+config H8606_HVSISTEMAS
+	bool "HV Sistemas H8606"
+	depends on (BF532)
+	help
+	  HV Sistemas H8606 board support.
+
+config BFIN532_IP0X
+	bool "IP04/IP08 IP-PBX"
+	depends on (BF532)
+	help
+	  Core support for IP04/IP04 open hardware IP-PBX.
+
+endchoice
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/Makefile
new file mode 100644
index 0000000..35256d2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# arch/blackfin/mach-bf533/boards/Makefile
+#
+
+obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
+obj-$(CONFIG_BFIN532_IP0X)             += ip0x.o
+obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
+obj-$(CONFIG_BFIN533_BLUETECHNIX_CM)   += cm_bf533.o
+obj-$(CONFIG_BLACKSTAMP)               += blackstamp.o
+obj-$(CONFIG_H8606_HVSISTEMAS)         += H8606.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/blackstamp.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/blackstamp.c
new file mode 100644
index 0000000..0ccf0cf
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -0,0 +1,514 @@
+/*
+ * Board Info File for the BlackStamp
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *                2008 Benjamin Matthews <bmat@lle.rochester.edu>
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * More info about the BlackStamp at:
+ * 	http://blackfin.uclinux.org/gf/project/blackstamp/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "BlackStamp";
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+#if IS_ENABLED(CONFIG_SMC91X)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF3,
+		.end = IRQ_PF3,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0x180000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 2, /* Framework chip select. */
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 7,
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF4, 0, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PF5, 0, "gpio-keys: BTN1"},
+	{BTN_2, GPIO_PF6, 0, "gpio-keys: BTN2"},
+}; /* Mapped to the first three PF Test Points */
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_GPIO)
+#include <linux/i2c-gpio.h>
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+	.sda_pin		= GPIO_PF8,
+	.scl_pin		= GPIO_PF9,
+	.sda_is_open_drain	= 0,
+	.scl_is_open_drain	= 0,
+	.udelay			= 40,
+}; /* This hasn't actually been used these pins
+    * are (currently) free pins on the expansion connector */
+
+static struct platform_device i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &i2c_gpio_data,
+	},
+};
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+};
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 600000000),
+	VRPAIR(VLEV_125, 600000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	&smc91x_device,
+#endif
+
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+	&bfin_device_gpiokeys,
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_GPIO)
+	&i2c_gpio_device,
+#endif
+};
+
+static int __init blackstamp_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+
+	ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	if (ret < 0)
+		return ret;
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	/*
+	 * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
+	 * the bfin-async-map driver takes care of flipping between
+	 * flash and ethernet when necessary.
+	 */
+	ret = gpio_request(GPIO_PF0, "enet_cpld");
+	if (!ret) {
+		gpio_direction_output(GPIO_PF0, 1);
+		gpio_free(GPIO_PF0);
+	}
+#endif
+
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(blackstamp_init);
+
+static struct platform_device *stamp_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(stamp_early_devices,
+		ARRAY_SIZE(stamp_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/cm_bf533.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/cm_bf533.c
new file mode 100644
index 0000000..4ef2fb0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -0,0 +1,582 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM BF533";
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* all SPI peripherals info goes here */
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00020000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = 0x20000
+	}, {
+		.name = "file system(spi)",
+		.size = 0x700000,
+		.offset = 0x00100000,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80",       /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,               /* Framework bus number */
+		.chip_select = 1,           /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.start = 0x20200300,
+		.end = 0x20200300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF0,
+		.end = IRQ_PF0,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SMSC911X)
+#include <linux/smsc911x.h>
+
+static struct resource smsc911x_resources[] = {
+	{
+		.name = "smsc911x-memory",
+		.start = 0x20308000,
+		.end = 0x20308000 + 0xFF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF8,
+		.end = IRQ_PF8,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_16BIT,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name = "smsc911x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smsc911x_resources),
+	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20308000,
+		.end = 0x20308000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20308004,
+		.end = 0x20308004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF4,
+		.end = IRQ_PF4,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF6,
+		.end = IRQ_PF6,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+static struct mtd_partition para_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux+rootfs(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	},
+};
+
+static struct physmap_flash_data para_flash_data = {
+	.width      = 2,
+	.parts      = para_partitions,
+	.nr_parts   = ARRAY_SIZE(para_partitions),
+};
+
+static struct resource para_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x201fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device para_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &para_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &para_flash_resource,
+};
+#endif
+
+
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 600000000),
+	VRPAIR(VLEV_125, 600000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *cm_bf533_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+	&isp1362_hcd_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	&smc91x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMSC911X)
+	&smsc911x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	&net2272_bfin_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+	&para_flash_device,
+#endif
+};
+
+static int __init cm_bf533_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices));
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+	return 0;
+}
+
+arch_initcall(cm_bf533_init);
+
+static struct platform_device *cm_bf533_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf533_early_devices,
+		ARRAY_SIZE(cm_bf533_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/ezkit.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/ezkit.c
new file mode 100644
index 0000000..3625e9e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -0,0 +1,541 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "ADI BF533-EZKIT";
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+/*
+ *  USB-LAN EzExtender board
+ *  Driver needs to know address, irq and flag pin.
+ */
+#if IS_ENABLED(CONFIG_SMC91X)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20310300,
+		.end = 0x20310300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF9,
+		.end = IRQ_PF9,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+static struct mtd_partition ezkit_partitions_a[] = {
+	{
+		.name       = "bootloader(nor a)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor a)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	},
+};
+
+static struct physmap_flash_data ezkit_flash_data_a = {
+	.width      = 2,
+	.parts      = ezkit_partitions_a,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions_a),
+};
+
+static struct resource ezkit_flash_resource_a = {
+	.start = 0x20000000,
+	.end   = 0x200fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device_a = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezkit_flash_data_a,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource_a,
+};
+
+static struct mtd_partition ezkit_partitions_b[] = {
+	{
+		.name   = "file system(nor b)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	},
+};
+
+static struct physmap_flash_data ezkit_flash_data_b = {
+	.width      = 2,
+	.parts      = ezkit_partitions_b,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions_b),
+};
+
+static struct resource ezkit_flash_resource_b = {
+	.start = 0x20100000,
+	.end   = 0x201fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device_b = {
+	.name          = "physmap-flash",
+	.id            = 4,
+	.dev = {
+		.platform_data = &ezkit_flash_data_b,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource_b,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
+static struct platdata_mtd_ram sram_data_a = {
+	.mapname   = "Flash A SRAM",
+	.bankwidth = 2,
+};
+
+static struct resource sram_resource_a = {
+	.start = 0x20240000,
+	.end   = 0x2024ffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sram_device_a = {
+	.name          = "mtd-ram",
+	.id            = 8,
+	.dev = {
+		.platform_data = &sram_data_a,
+	},
+	.num_resources = 1,
+	.resource      = &sram_resource_a,
+};
+
+static struct platdata_mtd_ram sram_data_b = {
+	.mapname   = "Flash B SRAM",
+	.bankwidth = 2,
+};
+
+static struct resource sram_resource_b = {
+	.start = 0x202c0000,
+	.end   = 0x202cffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sram_device_b = {
+	.name          = "mtd-ram",
+	.id            = 9,
+	.dev = {
+		.platform_data = &sram_data_b,
+	},
+	.num_resources = 1,
+	.resource      = &sram_resource_b,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00020000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF7, 1, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PF8, 1, "gpio-keys: BTN1"},
+	{BTN_2, GPIO_PF9, 1, "gpio-keys: BTN2"},
+	{BTN_3, GPIO_PF10, 1, "gpio-keys: BTN3"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_GPIO)
+#include <linux/i2c-gpio.h>
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+	.sda_pin		= GPIO_PF1,
+	.scl_pin		= GPIO_PF0,
+	.sda_is_open_drain	= 0,
+	.scl_is_open_drain	= 0,
+	.udelay			= 40,
+};
+
+static struct platform_device i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &i2c_gpio_data,
+	},
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 600000000),
+	VRPAIR(VLEV_125, 600000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
+	{
+		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+static struct platform_device bfin_ac97 = {
+	.name = "bfin-ac97",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+static struct platform_device *ezkit_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+	&ezkit_flash_device_a,
+	&ezkit_flash_device_b,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
+	&sram_device_a,
+	&sram_device_b,
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	&smc91x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+	&bfin_device_gpiokeys,
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_GPIO)
+	&i2c_gpio_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+	&bfin_i2s,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+	&bfin_ac97,
+#endif
+};
+
+static int __init ezkit_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+	return 0;
+}
+
+arch_initcall(ezkit_init);
+
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/ip0x.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/ip0x.c
new file mode 100644
index 0000000..39c8e85
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -0,0 +1,319 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2007 David Rowe
+ *                2006 Intratrade Ltd.
+ *                     Ivan Danov <idanov@gmail.com>
+ *                2005 National ICT Australia (NICTA)
+ *                     Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+#include <linux/usb/isp1362.h>
+#endif
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "IP04/IP08";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_BFIN532_IP0X)
+#if IS_ENABLED(CONFIG_DM9000)
+
+#include <linux/dm9000.h>
+
+static struct resource dm9000_resource1[] = {
+	{
+		.start = 0x20100000,
+		.end   = 0x20100000 + 1,
+		.flags = IORESOURCE_MEM
+	},{
+		.start = 0x20100000 + 2,
+		.end   = 0x20100000 + 3,
+		.flags = IORESOURCE_MEM
+	},{
+		.start = IRQ_PF15,
+		.end   = IRQ_PF15,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
+	}
+};
+
+static struct resource dm9000_resource2[] = {
+	{
+		.start = 0x20200000,
+		.end   = 0x20200000 + 1,
+		.flags = IORESOURCE_MEM
+	},{
+		.start = 0x20200000 + 2,
+		.end   = 0x20200000 + 3,
+		.flags = IORESOURCE_MEM
+	},{
+		.start = IRQ_PF14,
+		.end   = IRQ_PF14,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
+	}
+};
+
+/*
+* for the moment we limit ourselves to 16bit IO until some
+* better IO routines can be written and tested
+*/
+static struct dm9000_plat_data dm9000_platdata1 = {
+	.flags          = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device dm9000_device1 = {
+	.name           = "dm9000",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(dm9000_resource1),
+	.resource       = dm9000_resource1,
+	.dev            = {
+		.platform_data = &dm9000_platdata1,
+	}
+};
+
+static struct dm9000_plat_data dm9000_platdata2 = {
+	.flags          = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device dm9000_device2 = {
+	.name           = "dm9000",
+	.id             = 1,
+	.num_resources  = ARRAY_SIZE(dm9000_resource2),
+	.resource       = dm9000_resource2,
+	.dev            = {
+		.platform_data = &dm9000_platdata2,
+	}
+};
+
+#endif
+#endif
+
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* all SPI peripherals info goes here */
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,		/* if 1 - block!!! */
+};
+#endif
+
+/* Notice: for blackfin, the speed_hz is the value of register
+ * SPI_BAUD, not the real baudrate */
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 2,
+		.bus_num = 1,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
+	},
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+	.name = "bfin-spi-master",
+	.id = 1, /* Bus number */
+	.dev = {
+		.platform_data = &spi_bfin_master_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20300000,
+		.end   = 0x20300000 + 1,
+		.flags = IORESOURCE_MEM,
+	},{
+		.start = 0x20300000 + 2,
+		.end   = 0x20300000 + 3,
+		.flags = IORESOURCE_MEM,
+	},{
+		.start = IRQ_PF11,
+		.end   = IRQ_PF11,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,		/* external OC */
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+
+static struct platform_device *ip0x_devices[] __initdata = {
+#if defined(CONFIG_BFIN532_IP0X)
+#if IS_ENABLED(CONFIG_DM9000)
+	&dm9000_device1,
+	&dm9000_device2,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&spi_bfin_master_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+	&isp1362_hcd_device,
+#endif
+};
+
+static int __init ip0x_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(ip0x_devices, ARRAY_SIZE(ip0x_devices));
+
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
+	return 0;
+}
+
+arch_initcall(ip0x_init);
+
+static struct platform_device *ip0x_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ip0x_early_devices,
+		ARRAY_SIZE(ip0x_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/stamp.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/stamp.c
new file mode 100644
index 0000000..23eada7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/boards/stamp.c
@@ -0,0 +1,909 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "ADI BF533-STAMP";
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+#if IS_ENABLED(CONFIG_SMC91X)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 1,
+		.flags = IORESOURCE_BUS,
+	}, {
+		.start = IRQ_PF10,
+		.end = IRQ_PF10,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC)
+static struct mtd_partition stamp_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0x180000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data stamp_flash_data = {
+	.width    = 2,
+	.parts    = stamp_partitions,
+	.nr_parts = ARRAY_SIZE(stamp_partitions),
+};
+
+static struct resource stamp_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x203fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x7BB07BB0,	/* AMBCTL0 setting when accessing flash */
+		.end   = 0x7BB07BB0,	/* AMBCTL1 setting when accessing flash */
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = GPIO_PF0,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device stamp_flash_device = {
+	.name          = "bfin-async-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &stamp_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(stamp_flash_resource),
+	.resource      = stamp_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0x180000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
+static int bfin_mmc_spi_init(struct device *dev,
+	irqreturn_t (*detect_int)(int, void *), void *data)
+{
+	return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
+		IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+		"mmc-spi-detect", data);
+}
+
+static void bfin_mmc_spi_exit(struct device *dev, void *data)
+{
+	free_irq(MMC_SPI_CARD_DETECT_INT, data);
+}
+
+static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
+	.init = bfin_mmc_spi_init,
+	.exit = bfin_mmc_spi_exit,
+	.detect_delay = 100, /* msecs */
+};
+
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+	.pio_interrupt = 0,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+	{
+		.modalias = "ad1836",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+		.platform_data = "ad1836", /* only includes chip name for the moment */
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+	},
+#endif
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+		.platform_data = &bfin_mmc_spi_pdata,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SPORT)
+static struct resource bfin_sport0_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_TX,
+		.end = IRQ_SPORT0_TX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_SPORT0_TX,
+		.end = CH_SPORT0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_SPORT0_RX,
+		.end = CH_SPORT0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sport0_device = {
+	.name = "bfin_sport_raw",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_resources),
+	.resource = bfin_sport0_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF5, 0, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PF6, 0, "gpio-keys: BTN1"},
+	{BTN_2, GPIO_PF8, 0, "gpio-keys: BTN2"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_GPIO)
+#include <linux/i2c-gpio.h>
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+	.sda_pin		= GPIO_PF2,
+	.scl_pin		= GPIO_PF3,
+	.sda_is_open_drain	= 0,
+	.scl_is_open_drain	= 0,
+	.udelay			= 10,
+};
+
+static struct platform_device i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &i2c_gpio_data,
+	},
+};
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if IS_ENABLED(CONFIG_JOYSTICK_AD7142)
+	{
+		I2C_BOARD_INFO("ad7142_joystick", 0x2C),
+		.irq = 39,
+	},
+#endif
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+	},
+#endif
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.irq = 39,
+	},
+#endif
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
+	{
+		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+	},
+#endif
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
+	{
+		I2C_BOARD_INFO("ad5252", 0x2f),
+	},
+#endif
+};
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 600000000),
+	VRPAIR(VLEV_125, 600000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \
+	IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+
+#include <asm/bfin_sport.h>
+
+#define SPORT_REQ(x) \
+	[x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
+		P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
+
+static const u16 bfin_snd_pin[][7] = {
+	SPORT_REQ(0),
+	SPORT_REQ(1),
+};
+
+static struct bfin_snd_platform_data bfin_snd_data[] = {
+	{
+		.pin_req = &bfin_snd_pin[0][0],
+	},
+	{
+		.pin_req = &bfin_snd_pin[1][0],
+	},
+};
+
+#define BFIN_SND_RES(x) \
+	[x] = { \
+		{ \
+			.start = SPORT##x##_TCR1, \
+			.end = SPORT##x##_TCR1, \
+			.flags = IORESOURCE_MEM \
+		}, \
+		{ \
+			.start = CH_SPORT##x##_RX, \
+			.end = CH_SPORT##x##_RX, \
+			.flags = IORESOURCE_DMA, \
+		}, \
+		{ \
+			.start = CH_SPORT##x##_TX, \
+			.end = CH_SPORT##x##_TX, \
+			.flags = IORESOURCE_DMA, \
+		}, \
+		{ \
+			.start = IRQ_SPORT##x##_ERROR, \
+			.end = IRQ_SPORT##x##_ERROR, \
+			.flags = IORESOURCE_IRQ, \
+		} \
+	}
+
+static struct resource bfin_snd_resources[][4] = {
+	BFIN_SND_RES(0),
+	BFIN_SND_RES(1),
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+static struct platform_device bfin_i2s_pcm = {
+	.name = "bfin-i2s-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+static struct platform_device bfin_ac97_pcm = {
+	.name = "bfin-ac97-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+static const char * const ad1836_link[] = {
+	"bfin-i2s.0",
+	"spi0.4",
+};
+static struct platform_device bfin_ad1836_machine = {
+	.name = "bfin-snd-ad1836",
+	.id = -1,
+	.dev = {
+		.platform_data = (void *)ad1836_link,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
+static const unsigned ad73311_gpio[] = {
+	GPIO_PF4,
+};
+
+static struct platform_device bfin_ad73311_machine = {
+	.name = "bfin-snd-ad73311",
+	.id = 1,
+	.dev = {
+		.platform_data = (void *)ad73311_gpio,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
+static struct platform_device bfin_ad73311_codec_device = {
+	.name = "ad73311",
+	.id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_AD74111)
+static struct platform_device bfin_ad74111_codec_device = {
+	.name = "ad74111",
+	.id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	.num_resources =
+		ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+	.dev = {
+		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
+static struct platform_device bfin_ac97 = {
+	.name = "bfin-ac97",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	.num_resources =
+		ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+	.dev = {
+		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+	},
+};
+#endif
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	&smc91x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	&net2272_bfin_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+	&bfin_device_gpiokeys,
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_GPIO)
+	&i2c_gpio_device,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC)
+	&stamp_flash_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+	&bfin_i2s_pcm,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+	&bfin_ac97_pcm,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+	&bfin_ad1836_machine,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
+	&bfin_ad73311_machine,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
+	&bfin_ad73311_codec_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_AD74111)
+	&bfin_ad74111_codec_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
+	&bfin_i2s,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
+	&bfin_ac97,
+#endif
+};
+
+static int __init net2272_init(void)
+{
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	int ret;
+
+	/* Set PF0 to 0, PF1 to 1 make /AMS3 work properly */
+	ret = gpio_request(GPIO_PF0, "net2272");
+	if (ret)
+		return ret;
+
+	ret = gpio_request(GPIO_PF1, "net2272");
+	if (ret) {
+		gpio_free(GPIO_PF0);
+		return ret;
+	}
+
+	ret = gpio_request(GPIO_PF11, "net2272");
+	if (ret) {
+		gpio_free(GPIO_PF0);
+		gpio_free(GPIO_PF1);
+		return ret;
+	}
+
+	gpio_direction_output(GPIO_PF0, 0);
+	gpio_direction_output(GPIO_PF1, 1);
+
+	/* Reset the USB chip */
+	gpio_direction_output(GPIO_PF11, 0);
+	mdelay(2);
+	gpio_set_value(GPIO_PF11, 1);
+#endif
+
+	return 0;
+}
+
+static int __init stamp_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+
+	ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	if (ret < 0)
+		return ret;
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	/*
+	 * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
+	 * the bfin-async-map driver takes care of flipping between
+	 * flash and ethernet when necessary.
+	 */
+	ret = gpio_request(GPIO_PF0, "enet_cpld");
+	if (!ret) {
+		gpio_direction_output(GPIO_PF0, 1);
+		gpio_free(GPIO_PF0);
+	}
+#endif
+
+	if (net2272_init())
+		pr_warning("unable to configure net2272; it probably won't work\n");
+
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(stamp_init);
+
+static struct platform_device *stamp_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(stamp_early_devices,
+		ARRAY_SIZE(stamp_early_devices));
+}
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround pull up on cpld / flash pin not being strong enough */
+	gpio_request(GPIO_PF0, "flash_cpld");
+	gpio_direction_output(GPIO_PF0, 0);
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/dma.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/dma.c
new file mode 100644
index 0000000..1f5988d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/dma.c
@@ -0,0 +1,78 @@
+/*
+ * simple DMA Implementation for Blackfin
+ *
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS] = {
+	(struct dma_register *) DMA0_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_NEXT_DESC_PTR,
+	(struct dma_register *) DMA3_NEXT_DESC_PTR,
+	(struct dma_register *) DMA4_NEXT_DESC_PTR,
+	(struct dma_register *) DMA5_NEXT_DESC_PTR,
+	(struct dma_register *) DMA6_NEXT_DESC_PTR,
+	(struct dma_register *) DMA7_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+};
+EXPORT_SYMBOL(dma_io_base_addr);
+
+int channel2irq(unsigned int channel)
+{
+	int ret_irq = -1;
+
+	switch (channel) {
+	case CH_PPI:
+		ret_irq = IRQ_PPI;
+		break;
+
+	case CH_SPORT0_RX:
+		ret_irq = IRQ_SPORT0_RX;
+		break;
+
+	case CH_SPORT0_TX:
+		ret_irq = IRQ_SPORT0_TX;
+		break;
+
+	case CH_SPORT1_RX:
+		ret_irq = IRQ_SPORT1_RX;
+		break;
+
+	case CH_SPORT1_TX:
+		ret_irq = IRQ_SPORT1_TX;
+		break;
+
+	case CH_SPI:
+		ret_irq = IRQ_SPI;
+		break;
+
+	case CH_UART0_RX:
+		ret_irq = IRQ_UART0_RX;
+		break;
+
+	case CH_UART0_TX:
+		ret_irq = IRQ_UART0_TX;
+		break;
+
+	case CH_MEM_STREAM0_SRC:
+	case CH_MEM_STREAM0_DEST:
+		ret_irq = IRQ_MEM_DMA0;
+		break;
+
+	case CH_MEM_STREAM1_SRC:
+	case CH_MEM_STREAM1_DEST:
+		ret_irq = IRQ_MEM_DMA1;
+		break;
+	}
+	return ret_irq;
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/anomaly.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/anomaly.h
new file mode 100644
index 0000000..0e754ef
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -0,0 +1,383 @@
+/*
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
+ *
+ * Copyright 2004-2011 Analog Devices Inc.
+ * Licensed under the Clear BSD license.
+ */
+
+/* This file should be up to date with:
+ *  - Revision G, 05/23/2011; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* We do not support 0.1 or 0.2 silicon - sorry */
+#if __SILICON_REVISION__ < 3
+# error will not work on BF533 silicon version 0.0, 0.1, or 0.2
+#endif
+
+#if defined(__ADSPBF531__)
+# define ANOMALY_BF531 1
+#else
+# define ANOMALY_BF531 0
+#endif
+#if defined(__ADSPBF532__)
+# define ANOMALY_BF532 1
+#else
+# define ANOMALY_BF532 0
+#endif
+#if defined(__ADSPBF533__)
+# define ANOMALY_BF533 1
+#else
+# define ANOMALY_BF533 0
+#endif
+
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
+#define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
+/* Watchpoint Status Register (WPSTAT) Bits Are Set on Every Corresponding Match */
+#define ANOMALY_05000105 (__SILICON_REVISION__ > 2)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */
+#define ANOMALY_05000158 (__SILICON_REVISION__ < 5)
+/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
+#define ANOMALY_05000166 (1)
+/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
+#define ANOMALY_05000167 (1)
+/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
+#define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
+#define ANOMALY_05000180 (1)
+/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */
+#define ANOMALY_05000183 (__SILICON_REVISION__ < 4)
+/* False Protection Exceptions when Speculative Fetch Is Cancelled */
+#define ANOMALY_05000189 (__SILICON_REVISION__ < 4)
+/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */
+#define ANOMALY_05000193 (__SILICON_REVISION__ < 4)
+/* Restarting SPORT in Specific Modes May Cause Data Corruption */
+#define ANOMALY_05000194 (__SILICON_REVISION__ < 4)
+/* Failing MMR Accesses when Preceding Memory Read Stalls */
+#define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
+/* Current DMA Address Shows Wrong Value During Carry Fix */
+#define ANOMALY_05000199 (__SILICON_REVISION__ < 4)
+/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */
+#define ANOMALY_05000200 (__SILICON_REVISION__ == 3 || __SILICON_REVISION__ == 4)
+/* Receive Frame Sync Not Ignored During Active Frames in SPORT Multi-Channel Mode */
+#define ANOMALY_05000201 (__SILICON_REVISION__ == 3)
+/* Possible Infinite Stall with Specific Dual-DAG Situation */
+#define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
+/* Specific Sequence That Can Cause DMA Error or DMA Stopping */
+#define ANOMALY_05000203 (__SILICON_REVISION__ < 4)
+/* Incorrect Data Read with Writethrough "Allocate Cache Lines on Reads Only" Cache Mode */
+#define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533)
+/* Recovery from "Brown-Out" Condition */
+#define ANOMALY_05000207 (__SILICON_REVISION__ < 4)
+/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */
+#define ANOMALY_05000208 (1)
+/* Speed Path in Computational Unit Affects Certain Instructions */
+#define ANOMALY_05000209 (__SILICON_REVISION__ < 4)
+/* UART TX Interrupt Masked Erroneously */
+#define ANOMALY_05000215 (__SILICON_REVISION__ < 5)
+/* NMI Event at Boot Time Results in Unpredictable State */
+#define ANOMALY_05000219 (1)
+/* Incorrect Pulse-Width of UART Start Bit */
+#define ANOMALY_05000225 (__SILICON_REVISION__ < 5)
+/* Scratchpad Memory Bank Reads May Return Incorrect Data */
+#define ANOMALY_05000227 (__SILICON_REVISION__ < 5)
+/* SPI Slave Boot Mode Modifies Registers from Reset Value */
+#define ANOMALY_05000229 (1)
+/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */
+#define ANOMALY_05000230 (__SILICON_REVISION__ < 5)
+/* UART STB Bit Incorrectly Affects Receiver Setting */
+#define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
+/* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */
+#define ANOMALY_05000233 (__SILICON_REVISION__ < 6)
+/* Incorrect Revision Number in DSPID Register */
+#define ANOMALY_05000234 (__SILICON_REVISION__ == 4)
+/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
+#define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Data CPLBs Should Prevent False Hardware Errors */
+#define ANOMALY_05000246 (__SILICON_REVISION__ < 5)
+/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
+#define ANOMALY_05000250 (__SILICON_REVISION__ == 4)
+/* Maximum External Clock Speed for Timers */
+#define ANOMALY_05000253 (__SILICON_REVISION__ < 5)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (__SILICON_REVISION__ > 4)
+/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
+#define ANOMALY_05000255 (__SILICON_REVISION__ < 5)
+/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
+#define ANOMALY_05000257 (__SILICON_REVISION__ < 5)
+/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */
+#define ANOMALY_05000258 (__SILICON_REVISION__ < 5)
+/* ICPLB_STATUS MMR Register May Be Corrupted */
+#define ANOMALY_05000260 (__SILICON_REVISION__ < 5)
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 5)
+/* Stores To Data Cache May Be Lost */
+#define ANOMALY_05000262 (__SILICON_REVISION__ < 5)
+/* Hardware Loop Corrupted When Taking an ICPLB Exception */
+#define ANOMALY_05000263 (__SILICON_REVISION__ < 5)
+/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
+#define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (1)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
+#define ANOMALY_05000269 (__SILICON_REVISION__ < 5)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
+#define ANOMALY_05000270 (__SILICON_REVISION__ < 5)
+/* Spontaneous Reset of Internal Voltage Regulator */
+#define ANOMALY_05000271 (__SILICON_REVISION__ == 3)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* Writes to Synchronous SDRAM Memory May Be Lost */
+#define ANOMALY_05000273 (__SILICON_REVISION__ < 6)
+/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
+#define ANOMALY_05000276 (1)
+/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
+#define ANOMALY_05000277 (__SILICON_REVISION__ < 6)
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
+#define ANOMALY_05000278 (__SILICON_REVISION__ < 6)
+/* False Hardware Error when ISR Context Is Not Restored */
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 6)
+/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
+#define ANOMALY_05000282 (__SILICON_REVISION__ < 6)
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
+#define ANOMALY_05000283 (__SILICON_REVISION__ < 6)
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 6)
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
+#define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
+/* SSYNCs after Writes to DMA MMR Registers May Not Be Handled Correctly */
+#define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
+#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
+/* ALT_TIMING Bit in PPI_CONTROL Register Is Not Functional */
+#define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (1)	/* note: brokenness is noted in documentation, not anomaly sheet */
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
+#define ANOMALY_05000311 (__SILICON_REVISION__ < 6)
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (__SILICON_REVISION__ < 6)
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
+#define ANOMALY_05000313 (__SILICON_REVISION__ < 6)
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
+#define ANOMALY_05000315 (__SILICON_REVISION__ < 6)
+/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
+#define ANOMALY_05000319 ((ANOMALY_BF531 || ANOMALY_BF532) && __SILICON_REVISION__ < 6)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (__SILICON_REVISION__ < 6)
+/* UART Break Signal Issues */
+#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (__SILICON_REVISION__ < 6)
+/* PPI Does Not Start Properly In Specific Mode */
+#define ANOMALY_05000400 (__SILICON_REVISION__ == 5)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 5)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI Points to Invalid Memory */
+#define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
+/* Boot Failure When SDRAM Control Signals Toggle Coming Out Of Reset */
+#define ANOMALY_05000471 (1)
+/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */
+#define ANOMALY_05000473 (1)
+/* Possible Lockup Condition when Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* PLL May Latch Incorrect Values Coming Out of Reset */
+#define ANOMALY_05000489 (1)
+/* Instruction Memory Stalls Can Cause IFLUSH to Fail */
+#define ANOMALY_05000491 (1)
+/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */
+#define ANOMALY_05000494 (1)
+/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */
+#define ANOMALY_05000501 (1)
+
+/*
+ * These anomalies have been "phased" out of analog.com anomaly sheets and are
+ * here to show running on older silicon just isn't feasible.
+ */
+
+/* Internal voltage regulator can't be modified via register writes */
+#define ANOMALY_05000066 (__SILICON_REVISION__ < 2)
+/* Watchpoints (Hardware Breakpoints) are not supported */
+#define ANOMALY_05000067 (__SILICON_REVISION__ < 3)
+/* SDRAM PSSE bit cannot be set again after SDRAM Powerup */
+#define ANOMALY_05000070 (__SILICON_REVISION__ < 2)
+/* Writing FIO_DIR can corrupt a programmable flag's data */
+#define ANOMALY_05000079 (__SILICON_REVISION__ < 2)
+/* Timer Auto-Baud Mode requires the UART clock to be enabled. */
+#define ANOMALY_05000086 (__SILICON_REVISION__ < 2)
+/* Internal Clocking Modes on SPORT0 not supported */
+#define ANOMALY_05000088 (__SILICON_REVISION__ < 2)
+/* Internal voltage regulator does not wake up from an RTC wakeup */
+#define ANOMALY_05000092 (__SILICON_REVISION__ < 2)
+/* The IFLUSH Instruction Must Be Preceded by a CSYNC Instruction */
+#define ANOMALY_05000093 (__SILICON_REVISION__ < 2)
+/* Vectoring to instruction that is being filled into the i-cache may cause erroneous behavior */
+#define ANOMALY_05000095 (__SILICON_REVISION__ < 2)
+/* PREFETCH, FLUSH, and FLUSHINV Instructions Must Be Followed by a CSYNC Instruction */
+#define ANOMALY_05000096 (__SILICON_REVISION__ < 2)
+/* Performance Monitor 0 and 1 are swapped when monitoring memory events */
+#define ANOMALY_05000097 (__SILICON_REVISION__ < 2)
+/* 32-bit SPORT DMA will be word reversed */
+#define ANOMALY_05000098 (__SILICON_REVISION__ < 2)
+/* Incorrect status in the UART_IIR register */
+#define ANOMALY_05000100 (__SILICON_REVISION__ < 2)
+/* Reading X_MODIFY or Y_MODIFY while DMA channel is active */
+#define ANOMALY_05000101 (__SILICON_REVISION__ < 2)
+/* Descriptor MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */
+#define ANOMALY_05000102 (__SILICON_REVISION__ < 2)
+/* Incorrect Value Written to the Cycle Counters */
+#define ANOMALY_05000103 (__SILICON_REVISION__ < 2)
+/* Stores to L1 Data Memory Incorrect when a Specific Sequence Is Followed */
+#define ANOMALY_05000104 (__SILICON_REVISION__ < 2)
+/* Programmable Flag (PF3) functionality not supported in all PPI modes */
+#define ANOMALY_05000106 (__SILICON_REVISION__ < 2)
+/* Data store can be lost when targeting a cache line fill */
+#define ANOMALY_05000107 (__SILICON_REVISION__ < 2)
+/* Reserved Bits in SYSCFG Register Not Set at Power-On */
+#define ANOMALY_05000109 (__SILICON_REVISION__ < 3)
+/* Infinite Core Stall */
+#define ANOMALY_05000114 (__SILICON_REVISION__ < 2)
+/* PPI_FSx may glitch when generated by the on chip Timers. */
+#define ANOMALY_05000115 (__SILICON_REVISION__ < 2)
+/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */
+#define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
+/* DTEST registers allow access to Data Cache when DTEST_COMMAND< 14 >= 0 */
+#define ANOMALY_05000117 (__SILICON_REVISION__ < 2)
+/* Booting from an 8-bit or 24-bit Addressable SPI device is not supported */
+#define ANOMALY_05000118 (__SILICON_REVISION__ < 2)
+/* DTEST_COMMAND Initiated Memory Access May Be Incorrect If Data Cache or DMA Is Active */
+#define ANOMALY_05000123 (__SILICON_REVISION__ < 3)
+/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
+#define ANOMALY_05000124 (__SILICON_REVISION__ < 3)
+/* Erroneous Exception when Enabling Cache */
+#define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
+/* SPI clock polarity and phase bits incorrect during booting */
+#define ANOMALY_05000126 (__SILICON_REVISION__ < 3)
+/* DMEM_CONTROL<12> Is Not Set on Reset */
+#define ANOMALY_05000137 (__SILICON_REVISION__ < 3)
+/* SPI boot will not complete if there is a zero fill block in the loader file */
+#define ANOMALY_05000138 (__SILICON_REVISION__ == 2)
+/* TIMERx_CONFIG[5] must be set for PPI in GP output mode with internal Frame Syncs */
+#define ANOMALY_05000139 (__SILICON_REVISION__ < 2)
+/* Allowing the SPORT RX FIFO to fill will cause an overflow */
+#define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
+/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */
+#define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
+/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
+#define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
+/* A read from external memory may return a wrong value with data cache enabled */
+#define ANOMALY_05000143 (__SILICON_REVISION__ < 3)
+/* DMA and TESTSET conflict when both are accessing external memory */
+#define ANOMALY_05000144 (__SILICON_REVISION__ < 3)
+/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */
+#define ANOMALY_05000145 (__SILICON_REVISION__ < 3)
+/* MDMA may lose the first few words of a descriptor chain */
+#define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
+/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */
+#define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
+/* When booting from 16-bit asynchronous memory, the upper 8 bits of each word must be 0x00 */
+#define ANOMALY_05000148 (__SILICON_REVISION__ < 3)
+/* Frame Delay in SPORT Multichannel Mode */
+#define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
+/* SPORT TFS signal stays active in multichannel mode outside of valid channels */
+#define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
+/* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */
+#define ANOMALY_05000155 (__SILICON_REVISION__ < 3)
+/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */
+#define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
+/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */
+#define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
+/* Undefined Behavior when Power-Up Sequence Is Issued to SDRAM during Auto-Refresh */
+#define ANOMALY_05000168 (__SILICON_REVISION__ < 3)
+/* DATA CPLB Page Miss Can Result in Lost Write-Through Data Cache Writes */
+#define ANOMALY_05000169 (__SILICON_REVISION__ < 3)
+/* DMA vs Core accesses to external memory */
+#define ANOMALY_05000173 (__SILICON_REVISION__ < 3)
+/* Cache Fill Buffer Data lost */
+#define ANOMALY_05000174 (__SILICON_REVISION__ < 3)
+/* Overlapping Sequencer and Memory Stalls */
+#define ANOMALY_05000175 (__SILICON_REVISION__ < 3)
+/* Overflow Bit Asserted when Multiplication of -1 by -1 Followed by Accumulator Saturation */
+#define ANOMALY_05000176 (__SILICON_REVISION__ < 3)
+/* Disabling the PPI Resets the PPI Configuration Registers */
+#define ANOMALY_05000181 (__SILICON_REVISION__ < 3)
+/* Early PPI Transmit when FS1 Asserts before FS2 in TX Mode with 2 External Frame Syncs */
+#define ANOMALY_05000185 (__SILICON_REVISION__ < 3)
+/* PPI does not invert the Driving PPICLK edge in Transmit Modes */
+#define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
+/* In PPI Transmit Modes with External Frame Syncs POLC bit must be set to 1 */
+#define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
+/* Internal Voltage Regulator may not start up */
+#define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000120 (0)
+#define ANOMALY_05000149 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000182 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000323 (0)
+#define ANOMALY_05000353 (1)
+#define ANOMALY_05000362 (1)
+#define ANOMALY_05000364 (0)
+#define ANOMALY_05000380 (0)
+#define ANOMALY_05000383 (0)
+#define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000412 (0)
+#define ANOMALY_05000430 (0)
+#define ANOMALY_05000432 (0)
+#define ANOMALY_05000435 (0)
+#define ANOMALY_05000440 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000480 (0)
+#define ANOMALY_05000485 (0)
+#define ANOMALY_16000030 (0)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/bf533.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/bf533.h
new file mode 100644
index 0000000..e3e05f8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/bf533.h
@@ -0,0 +1,138 @@
+/*
+ * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ *
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __MACH_BF533_H__
+#define __MACH_BF533_H__
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15		0x8000
+#define IMASK_IVG14		0x4000
+#define IMASK_IVG13		0x2000
+#define IMASK_IVG12		0x1000
+
+#define IMASK_IVG11		0x0800
+#define IMASK_IVG10		0x0400
+#define IMASK_IVG9		0x0200
+#define IMASK_IVG8		0x0100
+
+#define IMASK_IVG7		0x0080
+#define IMASK_IVGTMR		0x0040
+#define IMASK_IVGHW		0x0020
+
+/***************************/
+
+
+#define BFIN_DSUBBANKS	4
+#define BFIN_DWAYS		2
+#define BFIN_DLINES		64
+#define BFIN_ISUBBANKS	4
+#define BFIN_IWAYS		4
+#define BFIN_ILINES		32
+
+#define WAY0_L			0x1
+#define WAY1_L			0x2
+#define WAY01_L			0x3
+#define WAY2_L			0x4
+#define WAY02_L			0x5
+#define	WAY12_L			0x6
+#define	WAY012_L		0x7
+
+#define	WAY3_L			0x8
+#define	WAY03_L			0x9
+#define	WAY13_L			0xA
+#define	WAY013_L		0xB
+
+#define	WAY32_L			0xC
+#define	WAY320_L		0xD
+#define	WAY321_L		0xE
+#define	WAYALL_L		0xF
+
+#define DMC_ENABLE (2<<2)	/*yes, 2, not 1 */
+
+/* IAR0 BIT FIELDS*/
+#define RTC_ERROR_BIT			0x0FFFFFFF
+#define UART_ERROR_BIT			0xF0FFFFFF
+#define SPORT1_ERROR_BIT		0xFF0FFFFF
+#define SPI_ERROR_BIT			0xFFF0FFFF
+#define SPORT0_ERROR_BIT		0xFFFF0FFF
+#define PPI_ERROR_BIT			0xFFFFF0FF
+#define DMA_ERROR_BIT			0xFFFFFF0F
+#define PLLWAKE_ERROR_BIT		0xFFFFFFFF
+
+/* IAR1 BIT FIELDS*/
+#define DMA7_UARTTX_BIT			0x0FFFFFFF
+#define DMA6_UARTRX_BIT			0xF0FFFFFF
+#define DMA5_SPI_BIT			0xFF0FFFFF
+#define DMA4_SPORT1TX_BIT		0xFFF0FFFF
+#define DMA3_SPORT1RX_BIT		0xFFFF0FFF
+#define DMA2_SPORT0TX_BIT		0xFFFFF0FF
+#define DMA1_SPORT0RX_BIT		0xFFFFFF0F
+#define DMA0_PPI_BIT			0xFFFFFFFF
+
+/* IAR2 BIT FIELDS*/
+#define WDTIMER_BIT			0x0FFFFFFF
+#define MEMDMA1_BIT			0xF0FFFFFF
+#define MEMDMA0_BIT			0xFF0FFFFF
+#define PFB_BIT				0xFFF0FFFF
+#define PFA_BIT				0xFFFF0FFF
+#define TIMER2_BIT			0xFFFFF0FF
+#define TIMER1_BIT			0xFFFFFF0F
+#define TIMER0_BIT		        0xFFFFFFFF
+
+/********************************* EBIU Settings ************************************/
+#define AMBCTL0VAL	((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL	((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#ifdef CONFIG_C_AMBEN_ALL
+#define V_AMBEN AMBEN_ALL
+#endif
+#ifdef CONFIG_C_AMBEN
+#define V_AMBEN 0x0
+#endif
+#ifdef CONFIG_C_AMBEN_B0
+#define V_AMBEN AMBEN_B0
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1
+#define V_AMBEN AMBEN_B0_B1
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1_B2
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+#ifdef CONFIG_C_CDPRIO
+#define V_CDPRIO 0x100
+#else
+#define V_CDPRIO 0x0
+#endif
+
+#define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO)
+
+#ifdef CONFIG_BF533
+#define CPU "BF533"
+#define CPUID 0x27a5
+#endif
+#ifdef CONFIG_BF532
+#define CPU "BF532"
+#define CPUID 0x27a5
+#endif
+#ifdef CONFIG_BF531
+#define CPU "BF531"
+#define CPUID 0x27a5
+#endif
+
+#ifndef CPU
+#error "Unknown CPU type - This kernel doesn't seem to be configured properly"
+#endif
+
+#endif				/* __MACH_BF533_H__  */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/bfin_serial.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/bfin_serial.h
new file mode 100644
index 0000000..08072c8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/bfin_serial.h
@@ -0,0 +1,14 @@
+/*
+ * mach/bfin_serial.h - Blackfin UART/Serial definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_SERIAL_H__
+#define __BFIN_MACH_SERIAL_H__
+
+#define BFIN_UART_NR_PORTS	1
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/blackfin.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/blackfin.h
new file mode 100644
index 0000000..e366207
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/blackfin.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#define BF533_FAMILY
+
+#include "bf533.h"
+#include "anomaly.h"
+
+#include <asm/def_LPBlackfin.h>
+#include "defBF532.h"
+
+#ifndef __ASSEMBLY__
+# include <asm/cdef_LPBlackfin.h>
+# include "cdefBF532.h"
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/cdefBF532.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
new file mode 100644
index 0000000..fd0cbe4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
@@ -0,0 +1,682 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _CDEF_BF532_H
+#define _CDEF_BF532_H
+
+/* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */
+#define bfin_read_PLL_CTL()                  bfin_read16(PLL_CTL)
+#define bfin_read_PLL_STAT()                 bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val)             bfin_write16(PLL_STAT,val)
+#define bfin_read_PLL_LOCKCNT()              bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val)          bfin_write16(PLL_LOCKCNT,val)
+#define bfin_read_CHIPID()                   bfin_read32(CHIPID)
+#define bfin_read_PLL_DIV()                  bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val)              bfin_write16(PLL_DIV,val)
+#define bfin_read_VR_CTL()                   bfin_read16(VR_CTL)
+
+/* System Interrupt Controller (0xFFC0 0C00-0xFFC0 0FFF) */
+#define bfin_read_SWRST()                    bfin_read16(SWRST)
+#define bfin_write_SWRST(val)                bfin_write16(SWRST,val)
+#define bfin_read_SYSCR()                    bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val)                bfin_write16(SYSCR,val)
+#define bfin_read_SIC_IAR0()                 bfin_read32(SIC_IAR0)
+#define bfin_write_SIC_IAR0(val)             bfin_write32(SIC_IAR0,val)
+#define bfin_read_SIC_IAR1()                 bfin_read32(SIC_IAR1)
+#define bfin_write_SIC_IAR1(val)             bfin_write32(SIC_IAR1,val)
+#define bfin_read_SIC_IAR2()                 bfin_read32(SIC_IAR2)
+#define bfin_write_SIC_IAR2(val)             bfin_write32(SIC_IAR2,val)
+#define bfin_read_SIC_IAR3()                 bfin_read32(SIC_IAR3)
+#define bfin_write_SIC_IAR3(val)             bfin_write32(SIC_IAR3,val)
+#define bfin_read_SIC_IMASK()                bfin_read32(SIC_IMASK)
+#define bfin_write_SIC_IMASK(val)            bfin_write32(SIC_IMASK,val)
+#define bfin_read_SIC_ISR()                  bfin_read32(SIC_ISR)
+#define bfin_write_SIC_ISR(val)              bfin_write32(SIC_ISR,val)
+#define bfin_read_SIC_IWR()                  bfin_read32(SIC_IWR)
+#define bfin_write_SIC_IWR(val)              bfin_write32(SIC_IWR,val)
+
+/* Watchdog Timer (0xFFC0 1000-0xFFC0 13FF) */
+#define bfin_read_WDOG_CTL()                 bfin_read16(WDOG_CTL)
+#define bfin_write_WDOG_CTL(val)             bfin_write16(WDOG_CTL,val)
+#define bfin_read_WDOG_CNT()                 bfin_read32(WDOG_CNT)
+#define bfin_write_WDOG_CNT(val)             bfin_write32(WDOG_CNT,val)
+#define bfin_read_WDOG_STAT()                bfin_read32(WDOG_STAT)
+#define bfin_write_WDOG_STAT(val)            bfin_write32(WDOG_STAT,val)
+
+/* Real Time Clock (0xFFC0 1400-0xFFC0 17FF) */
+#define bfin_read_RTC_STAT()                 bfin_read32(RTC_STAT)
+#define bfin_write_RTC_STAT(val)             bfin_write32(RTC_STAT,val)
+#define bfin_read_RTC_ICTL()                 bfin_read16(RTC_ICTL)
+#define bfin_write_RTC_ICTL(val)             bfin_write16(RTC_ICTL,val)
+#define bfin_read_RTC_ISTAT()                bfin_read16(RTC_ISTAT)
+#define bfin_write_RTC_ISTAT(val)            bfin_write16(RTC_ISTAT,val)
+#define bfin_read_RTC_SWCNT()                bfin_read16(RTC_SWCNT)
+#define bfin_write_RTC_SWCNT(val)            bfin_write16(RTC_SWCNT,val)
+#define bfin_read_RTC_ALARM()                bfin_read32(RTC_ALARM)
+#define bfin_write_RTC_ALARM(val)            bfin_write32(RTC_ALARM,val)
+#define bfin_read_RTC_FAST()                 bfin_read16(RTC_FAST)
+#define bfin_write_RTC_FAST(val)             bfin_write16(RTC_FAST,val)
+#define bfin_read_RTC_PREN()                 bfin_read16(RTC_PREN)
+#define bfin_write_RTC_PREN(val)             bfin_write16(RTC_PREN,val)
+
+/* DMA Traffic controls */
+#define bfin_read_DMAC_TC_PER()              bfin_read16(DMAC_TC_PER)
+#define bfin_write_DMAC_TC_PER(val)          bfin_write16(DMAC_TC_PER,val)
+#define bfin_read_DMAC_TC_CNT()              bfin_read16(DMAC_TC_CNT)
+#define bfin_write_DMAC_TC_CNT(val)          bfin_write16(DMAC_TC_CNT,val)
+
+/* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */
+#define bfin_read_FIO_DIR()                  bfin_read16(FIO_DIR)
+#define bfin_write_FIO_DIR(val)              bfin_write16(FIO_DIR,val)
+#define bfin_read_FIO_MASKA_C()              bfin_read16(FIO_MASKA_C)
+#define bfin_write_FIO_MASKA_C(val)          bfin_write16(FIO_MASKA_C,val)
+#define bfin_read_FIO_MASKA_S()              bfin_read16(FIO_MASKA_S)
+#define bfin_write_FIO_MASKA_S(val)          bfin_write16(FIO_MASKA_S,val)
+#define bfin_read_FIO_MASKB_C()              bfin_read16(FIO_MASKB_C)
+#define bfin_write_FIO_MASKB_C(val)          bfin_write16(FIO_MASKB_C,val)
+#define bfin_read_FIO_MASKB_S()              bfin_read16(FIO_MASKB_S)
+#define bfin_write_FIO_MASKB_S(val)          bfin_write16(FIO_MASKB_S,val)
+#define bfin_read_FIO_POLAR()                bfin_read16(FIO_POLAR)
+#define bfin_write_FIO_POLAR(val)            bfin_write16(FIO_POLAR,val)
+#define bfin_read_FIO_EDGE()                 bfin_read16(FIO_EDGE)
+#define bfin_write_FIO_EDGE(val)             bfin_write16(FIO_EDGE,val)
+#define bfin_read_FIO_BOTH()                 bfin_read16(FIO_BOTH)
+#define bfin_write_FIO_BOTH(val)             bfin_write16(FIO_BOTH,val)
+#define bfin_read_FIO_INEN()                 bfin_read16(FIO_INEN)
+#define bfin_write_FIO_INEN(val)             bfin_write16(FIO_INEN,val)
+#define bfin_read_FIO_MASKA_D()              bfin_read16(FIO_MASKA_D)
+#define bfin_write_FIO_MASKA_D(val)          bfin_write16(FIO_MASKA_D,val)
+#define bfin_read_FIO_MASKA_T()              bfin_read16(FIO_MASKA_T)
+#define bfin_write_FIO_MASKA_T(val)          bfin_write16(FIO_MASKA_T,val)
+#define bfin_read_FIO_MASKB_D()              bfin_read16(FIO_MASKB_D)
+#define bfin_write_FIO_MASKB_D(val)          bfin_write16(FIO_MASKB_D,val)
+#define bfin_read_FIO_MASKB_T()              bfin_read16(FIO_MASKB_T)
+#define bfin_write_FIO_MASKB_T(val)          bfin_write16(FIO_MASKB_T,val)
+
+#if ANOMALY_05000311
+/* Keep at the CPP expansion to avoid circular header dependency loops */
+#define BFIN_WRITE_FIO_FLAG(name, val) \
+	do { \
+		unsigned long __flags; \
+		__flags = hard_local_irq_save(); \
+		bfin_write16(FIO_FLAG_##name, val); \
+		bfin_read_CHIPID(); \
+		hard_local_irq_restore(__flags); \
+	} while (0)
+#define bfin_write_FIO_FLAG_D(val)           BFIN_WRITE_FIO_FLAG(D, val)
+#define bfin_write_FIO_FLAG_C(val)           BFIN_WRITE_FIO_FLAG(C, val)
+#define bfin_write_FIO_FLAG_S(val)           BFIN_WRITE_FIO_FLAG(S, val)
+#define bfin_write_FIO_FLAG_T(val)           BFIN_WRITE_FIO_FLAG(T, val)
+
+#define BFIN_READ_FIO_FLAG(name) \
+	({ \
+		unsigned long __flags; \
+		u16 __ret; \
+		__flags = hard_local_irq_save(); \
+		__ret = bfin_read16(FIO_FLAG_##name); \
+		bfin_read_CHIPID(); \
+		hard_local_irq_restore(__flags); \
+		__ret; \
+	})
+#define bfin_read_FIO_FLAG_D()               BFIN_READ_FIO_FLAG(D)
+#define bfin_read_FIO_FLAG_C()               BFIN_READ_FIO_FLAG(C)
+#define bfin_read_FIO_FLAG_S()               BFIN_READ_FIO_FLAG(S)
+#define bfin_read_FIO_FLAG_T()               BFIN_READ_FIO_FLAG(T)
+
+#else
+#define bfin_write_FIO_FLAG_D(val)           bfin_write16(FIO_FLAG_D, val)
+#define bfin_write_FIO_FLAG_C(val)           bfin_write16(FIO_FLAG_C, val)
+#define bfin_write_FIO_FLAG_S(val)           bfin_write16(FIO_FLAG_S, val)
+#define bfin_write_FIO_FLAG_T(val)           bfin_write16(FIO_FLAG_T, val)
+#define bfin_read_FIO_FLAG_D()               bfin_read16(FIO_FLAG_D)
+#define bfin_read_FIO_FLAG_C()               bfin_read16(FIO_FLAG_C)
+#define bfin_read_FIO_FLAG_S()               bfin_read16(FIO_FLAG_S)
+#define bfin_read_FIO_FLAG_T()               bfin_read16(FIO_FLAG_T)
+#endif
+
+/* DMA Controller */
+#define bfin_read_DMA0_CONFIG()              bfin_read16(DMA0_CONFIG)
+#define bfin_write_DMA0_CONFIG(val)          bfin_write16(DMA0_CONFIG,val)
+#define bfin_read_DMA0_NEXT_DESC_PTR()       bfin_read32(DMA0_NEXT_DESC_PTR)
+#define bfin_write_DMA0_NEXT_DESC_PTR(val)   bfin_write32(DMA0_NEXT_DESC_PTR,val)
+#define bfin_read_DMA0_START_ADDR()          bfin_read32(DMA0_START_ADDR)
+#define bfin_write_DMA0_START_ADDR(val)      bfin_write32(DMA0_START_ADDR,val)
+#define bfin_read_DMA0_X_COUNT()             bfin_read16(DMA0_X_COUNT)
+#define bfin_write_DMA0_X_COUNT(val)         bfin_write16(DMA0_X_COUNT,val)
+#define bfin_read_DMA0_Y_COUNT()             bfin_read16(DMA0_Y_COUNT)
+#define bfin_write_DMA0_Y_COUNT(val)         bfin_write16(DMA0_Y_COUNT,val)
+#define bfin_read_DMA0_X_MODIFY()            bfin_read16(DMA0_X_MODIFY)
+#define bfin_write_DMA0_X_MODIFY(val)        bfin_write16(DMA0_X_MODIFY,val)
+#define bfin_read_DMA0_Y_MODIFY()            bfin_read16(DMA0_Y_MODIFY)
+#define bfin_write_DMA0_Y_MODIFY(val)        bfin_write16(DMA0_Y_MODIFY,val)
+#define bfin_read_DMA0_CURR_DESC_PTR()       bfin_read32(DMA0_CURR_DESC_PTR)
+#define bfin_write_DMA0_CURR_DESC_PTR(val)   bfin_write32(DMA0_CURR_DESC_PTR,val)
+#define bfin_read_DMA0_CURR_ADDR()           bfin_read32(DMA0_CURR_ADDR)
+#define bfin_write_DMA0_CURR_ADDR(val)       bfin_write32(DMA0_CURR_ADDR,val)
+#define bfin_read_DMA0_CURR_X_COUNT()        bfin_read16(DMA0_CURR_X_COUNT)
+#define bfin_write_DMA0_CURR_X_COUNT(val)    bfin_write16(DMA0_CURR_X_COUNT,val)
+#define bfin_read_DMA0_CURR_Y_COUNT()        bfin_read16(DMA0_CURR_Y_COUNT)
+#define bfin_write_DMA0_CURR_Y_COUNT(val)    bfin_write16(DMA0_CURR_Y_COUNT,val)
+#define bfin_read_DMA0_IRQ_STATUS()          bfin_read16(DMA0_IRQ_STATUS)
+#define bfin_write_DMA0_IRQ_STATUS(val)      bfin_write16(DMA0_IRQ_STATUS,val)
+#define bfin_read_DMA0_PERIPHERAL_MAP()      bfin_read16(DMA0_PERIPHERAL_MAP)
+#define bfin_write_DMA0_PERIPHERAL_MAP(val)  bfin_write16(DMA0_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA1_CONFIG()              bfin_read16(DMA1_CONFIG)
+#define bfin_write_DMA1_CONFIG(val)          bfin_write16(DMA1_CONFIG,val)
+#define bfin_read_DMA1_NEXT_DESC_PTR()       bfin_read32(DMA1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_NEXT_DESC_PTR(val)   bfin_write32(DMA1_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_START_ADDR()          bfin_read32(DMA1_START_ADDR)
+#define bfin_write_DMA1_START_ADDR(val)      bfin_write32(DMA1_START_ADDR,val)
+#define bfin_read_DMA1_X_COUNT()             bfin_read16(DMA1_X_COUNT)
+#define bfin_write_DMA1_X_COUNT(val)         bfin_write16(DMA1_X_COUNT,val)
+#define bfin_read_DMA1_Y_COUNT()             bfin_read16(DMA1_Y_COUNT)
+#define bfin_write_DMA1_Y_COUNT(val)         bfin_write16(DMA1_Y_COUNT,val)
+#define bfin_read_DMA1_X_MODIFY()            bfin_read16(DMA1_X_MODIFY)
+#define bfin_write_DMA1_X_MODIFY(val)        bfin_write16(DMA1_X_MODIFY,val)
+#define bfin_read_DMA1_Y_MODIFY()            bfin_read16(DMA1_Y_MODIFY)
+#define bfin_write_DMA1_Y_MODIFY(val)        bfin_write16(DMA1_Y_MODIFY,val)
+#define bfin_read_DMA1_CURR_DESC_PTR()       bfin_read32(DMA1_CURR_DESC_PTR)
+#define bfin_write_DMA1_CURR_DESC_PTR(val)   bfin_write32(DMA1_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_CURR_ADDR()           bfin_read32(DMA1_CURR_ADDR)
+#define bfin_write_DMA1_CURR_ADDR(val)       bfin_write32(DMA1_CURR_ADDR,val)
+#define bfin_read_DMA1_CURR_X_COUNT()        bfin_read16(DMA1_CURR_X_COUNT)
+#define bfin_write_DMA1_CURR_X_COUNT(val)    bfin_write16(DMA1_CURR_X_COUNT,val)
+#define bfin_read_DMA1_CURR_Y_COUNT()        bfin_read16(DMA1_CURR_Y_COUNT)
+#define bfin_write_DMA1_CURR_Y_COUNT(val)    bfin_write16(DMA1_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_IRQ_STATUS()          bfin_read16(DMA1_IRQ_STATUS)
+#define bfin_write_DMA1_IRQ_STATUS(val)      bfin_write16(DMA1_IRQ_STATUS,val)
+#define bfin_read_DMA1_PERIPHERAL_MAP()      bfin_read16(DMA1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_PERIPHERAL_MAP(val)  bfin_write16(DMA1_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA2_CONFIG()              bfin_read16(DMA2_CONFIG)
+#define bfin_write_DMA2_CONFIG(val)          bfin_write16(DMA2_CONFIG,val)
+#define bfin_read_DMA2_NEXT_DESC_PTR()       bfin_read32(DMA2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_NEXT_DESC_PTR(val)   bfin_write32(DMA2_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_START_ADDR()          bfin_read32(DMA2_START_ADDR)
+#define bfin_write_DMA2_START_ADDR(val)      bfin_write32(DMA2_START_ADDR,val)
+#define bfin_read_DMA2_X_COUNT()             bfin_read16(DMA2_X_COUNT)
+#define bfin_write_DMA2_X_COUNT(val)         bfin_write16(DMA2_X_COUNT,val)
+#define bfin_read_DMA2_Y_COUNT()             bfin_read16(DMA2_Y_COUNT)
+#define bfin_write_DMA2_Y_COUNT(val)         bfin_write16(DMA2_Y_COUNT,val)
+#define bfin_read_DMA2_X_MODIFY()            bfin_read16(DMA2_X_MODIFY)
+#define bfin_write_DMA2_X_MODIFY(val)        bfin_write16(DMA2_X_MODIFY,val)
+#define bfin_read_DMA2_Y_MODIFY()            bfin_read16(DMA2_Y_MODIFY)
+#define bfin_write_DMA2_Y_MODIFY(val)        bfin_write16(DMA2_Y_MODIFY,val)
+#define bfin_read_DMA2_CURR_DESC_PTR()       bfin_read32(DMA2_CURR_DESC_PTR)
+#define bfin_write_DMA2_CURR_DESC_PTR(val)   bfin_write32(DMA2_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_CURR_ADDR()           bfin_read32(DMA2_CURR_ADDR)
+#define bfin_write_DMA2_CURR_ADDR(val)       bfin_write32(DMA2_CURR_ADDR,val)
+#define bfin_read_DMA2_CURR_X_COUNT()        bfin_read16(DMA2_CURR_X_COUNT)
+#define bfin_write_DMA2_CURR_X_COUNT(val)    bfin_write16(DMA2_CURR_X_COUNT,val)
+#define bfin_read_DMA2_CURR_Y_COUNT()        bfin_read16(DMA2_CURR_Y_COUNT)
+#define bfin_write_DMA2_CURR_Y_COUNT(val)    bfin_write16(DMA2_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_IRQ_STATUS()          bfin_read16(DMA2_IRQ_STATUS)
+#define bfin_write_DMA2_IRQ_STATUS(val)      bfin_write16(DMA2_IRQ_STATUS,val)
+#define bfin_read_DMA2_PERIPHERAL_MAP()      bfin_read16(DMA2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_PERIPHERAL_MAP(val)  bfin_write16(DMA2_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA3_CONFIG()              bfin_read16(DMA3_CONFIG)
+#define bfin_write_DMA3_CONFIG(val)          bfin_write16(DMA3_CONFIG,val)
+#define bfin_read_DMA3_NEXT_DESC_PTR()       bfin_read32(DMA3_NEXT_DESC_PTR)
+#define bfin_write_DMA3_NEXT_DESC_PTR(val)   bfin_write32(DMA3_NEXT_DESC_PTR,val)
+#define bfin_read_DMA3_START_ADDR()          bfin_read32(DMA3_START_ADDR)
+#define bfin_write_DMA3_START_ADDR(val)      bfin_write32(DMA3_START_ADDR,val)
+#define bfin_read_DMA3_X_COUNT()             bfin_read16(DMA3_X_COUNT)
+#define bfin_write_DMA3_X_COUNT(val)         bfin_write16(DMA3_X_COUNT,val)
+#define bfin_read_DMA3_Y_COUNT()             bfin_read16(DMA3_Y_COUNT)
+#define bfin_write_DMA3_Y_COUNT(val)         bfin_write16(DMA3_Y_COUNT,val)
+#define bfin_read_DMA3_X_MODIFY()            bfin_read16(DMA3_X_MODIFY)
+#define bfin_write_DMA3_X_MODIFY(val)        bfin_write16(DMA3_X_MODIFY,val)
+#define bfin_read_DMA3_Y_MODIFY()            bfin_read16(DMA3_Y_MODIFY)
+#define bfin_write_DMA3_Y_MODIFY(val)        bfin_write16(DMA3_Y_MODIFY,val)
+#define bfin_read_DMA3_CURR_DESC_PTR()       bfin_read32(DMA3_CURR_DESC_PTR)
+#define bfin_write_DMA3_CURR_DESC_PTR(val)   bfin_write32(DMA3_CURR_DESC_PTR,val)
+#define bfin_read_DMA3_CURR_ADDR()           bfin_read32(DMA3_CURR_ADDR)
+#define bfin_write_DMA3_CURR_ADDR(val)       bfin_write32(DMA3_CURR_ADDR,val)
+#define bfin_read_DMA3_CURR_X_COUNT()        bfin_read16(DMA3_CURR_X_COUNT)
+#define bfin_write_DMA3_CURR_X_COUNT(val)    bfin_write16(DMA3_CURR_X_COUNT,val)
+#define bfin_read_DMA3_CURR_Y_COUNT()        bfin_read16(DMA3_CURR_Y_COUNT)
+#define bfin_write_DMA3_CURR_Y_COUNT(val)    bfin_write16(DMA3_CURR_Y_COUNT,val)
+#define bfin_read_DMA3_IRQ_STATUS()          bfin_read16(DMA3_IRQ_STATUS)
+#define bfin_write_DMA3_IRQ_STATUS(val)      bfin_write16(DMA3_IRQ_STATUS,val)
+#define bfin_read_DMA3_PERIPHERAL_MAP()      bfin_read16(DMA3_PERIPHERAL_MAP)
+#define bfin_write_DMA3_PERIPHERAL_MAP(val)  bfin_write16(DMA3_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA4_CONFIG()              bfin_read16(DMA4_CONFIG)
+#define bfin_write_DMA4_CONFIG(val)          bfin_write16(DMA4_CONFIG,val)
+#define bfin_read_DMA4_NEXT_DESC_PTR()       bfin_read32(DMA4_NEXT_DESC_PTR)
+#define bfin_write_DMA4_NEXT_DESC_PTR(val)   bfin_write32(DMA4_NEXT_DESC_PTR,val)
+#define bfin_read_DMA4_START_ADDR()          bfin_read32(DMA4_START_ADDR)
+#define bfin_write_DMA4_START_ADDR(val)      bfin_write32(DMA4_START_ADDR,val)
+#define bfin_read_DMA4_X_COUNT()             bfin_read16(DMA4_X_COUNT)
+#define bfin_write_DMA4_X_COUNT(val)         bfin_write16(DMA4_X_COUNT,val)
+#define bfin_read_DMA4_Y_COUNT()             bfin_read16(DMA4_Y_COUNT)
+#define bfin_write_DMA4_Y_COUNT(val)         bfin_write16(DMA4_Y_COUNT,val)
+#define bfin_read_DMA4_X_MODIFY()            bfin_read16(DMA4_X_MODIFY)
+#define bfin_write_DMA4_X_MODIFY(val)        bfin_write16(DMA4_X_MODIFY,val)
+#define bfin_read_DMA4_Y_MODIFY()            bfin_read16(DMA4_Y_MODIFY)
+#define bfin_write_DMA4_Y_MODIFY(val)        bfin_write16(DMA4_Y_MODIFY,val)
+#define bfin_read_DMA4_CURR_DESC_PTR()       bfin_read32(DMA4_CURR_DESC_PTR)
+#define bfin_write_DMA4_CURR_DESC_PTR(val)   bfin_write32(DMA4_CURR_DESC_PTR,val)
+#define bfin_read_DMA4_CURR_ADDR()           bfin_read32(DMA4_CURR_ADDR)
+#define bfin_write_DMA4_CURR_ADDR(val)       bfin_write32(DMA4_CURR_ADDR,val)
+#define bfin_read_DMA4_CURR_X_COUNT()        bfin_read16(DMA4_CURR_X_COUNT)
+#define bfin_write_DMA4_CURR_X_COUNT(val)    bfin_write16(DMA4_CURR_X_COUNT,val)
+#define bfin_read_DMA4_CURR_Y_COUNT()        bfin_read16(DMA4_CURR_Y_COUNT)
+#define bfin_write_DMA4_CURR_Y_COUNT(val)    bfin_write16(DMA4_CURR_Y_COUNT,val)
+#define bfin_read_DMA4_IRQ_STATUS()          bfin_read16(DMA4_IRQ_STATUS)
+#define bfin_write_DMA4_IRQ_STATUS(val)      bfin_write16(DMA4_IRQ_STATUS,val)
+#define bfin_read_DMA4_PERIPHERAL_MAP()      bfin_read16(DMA4_PERIPHERAL_MAP)
+#define bfin_write_DMA4_PERIPHERAL_MAP(val)  bfin_write16(DMA4_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA5_CONFIG()              bfin_read16(DMA5_CONFIG)
+#define bfin_write_DMA5_CONFIG(val)          bfin_write16(DMA5_CONFIG,val)
+#define bfin_read_DMA5_NEXT_DESC_PTR()       bfin_read32(DMA5_NEXT_DESC_PTR)
+#define bfin_write_DMA5_NEXT_DESC_PTR(val)   bfin_write32(DMA5_NEXT_DESC_PTR,val)
+#define bfin_read_DMA5_START_ADDR()          bfin_read32(DMA5_START_ADDR)
+#define bfin_write_DMA5_START_ADDR(val)      bfin_write32(DMA5_START_ADDR,val)
+#define bfin_read_DMA5_X_COUNT()             bfin_read16(DMA5_X_COUNT)
+#define bfin_write_DMA5_X_COUNT(val)         bfin_write16(DMA5_X_COUNT,val)
+#define bfin_read_DMA5_Y_COUNT()             bfin_read16(DMA5_Y_COUNT)
+#define bfin_write_DMA5_Y_COUNT(val)         bfin_write16(DMA5_Y_COUNT,val)
+#define bfin_read_DMA5_X_MODIFY()            bfin_read16(DMA5_X_MODIFY)
+#define bfin_write_DMA5_X_MODIFY(val)        bfin_write16(DMA5_X_MODIFY,val)
+#define bfin_read_DMA5_Y_MODIFY()            bfin_read16(DMA5_Y_MODIFY)
+#define bfin_write_DMA5_Y_MODIFY(val)        bfin_write16(DMA5_Y_MODIFY,val)
+#define bfin_read_DMA5_CURR_DESC_PTR()       bfin_read32(DMA5_CURR_DESC_PTR)
+#define bfin_write_DMA5_CURR_DESC_PTR(val)   bfin_write32(DMA5_CURR_DESC_PTR,val)
+#define bfin_read_DMA5_CURR_ADDR()           bfin_read32(DMA5_CURR_ADDR)
+#define bfin_write_DMA5_CURR_ADDR(val)       bfin_write32(DMA5_CURR_ADDR,val)
+#define bfin_read_DMA5_CURR_X_COUNT()        bfin_read16(DMA5_CURR_X_COUNT)
+#define bfin_write_DMA5_CURR_X_COUNT(val)    bfin_write16(DMA5_CURR_X_COUNT,val)
+#define bfin_read_DMA5_CURR_Y_COUNT()        bfin_read16(DMA5_CURR_Y_COUNT)
+#define bfin_write_DMA5_CURR_Y_COUNT(val)    bfin_write16(DMA5_CURR_Y_COUNT,val)
+#define bfin_read_DMA5_IRQ_STATUS()          bfin_read16(DMA5_IRQ_STATUS)
+#define bfin_write_DMA5_IRQ_STATUS(val)      bfin_write16(DMA5_IRQ_STATUS,val)
+#define bfin_read_DMA5_PERIPHERAL_MAP()      bfin_read16(DMA5_PERIPHERAL_MAP)
+#define bfin_write_DMA5_PERIPHERAL_MAP(val)  bfin_write16(DMA5_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA6_CONFIG()              bfin_read16(DMA6_CONFIG)
+#define bfin_write_DMA6_CONFIG(val)          bfin_write16(DMA6_CONFIG,val)
+#define bfin_read_DMA6_NEXT_DESC_PTR()       bfin_read32(DMA6_NEXT_DESC_PTR)
+#define bfin_write_DMA6_NEXT_DESC_PTR(val)   bfin_write32(DMA6_NEXT_DESC_PTR,val)
+#define bfin_read_DMA6_START_ADDR()          bfin_read32(DMA6_START_ADDR)
+#define bfin_write_DMA6_START_ADDR(val)      bfin_write32(DMA6_START_ADDR,val)
+#define bfin_read_DMA6_X_COUNT()             bfin_read16(DMA6_X_COUNT)
+#define bfin_write_DMA6_X_COUNT(val)         bfin_write16(DMA6_X_COUNT,val)
+#define bfin_read_DMA6_Y_COUNT()             bfin_read16(DMA6_Y_COUNT)
+#define bfin_write_DMA6_Y_COUNT(val)         bfin_write16(DMA6_Y_COUNT,val)
+#define bfin_read_DMA6_X_MODIFY()            bfin_read16(DMA6_X_MODIFY)
+#define bfin_write_DMA6_X_MODIFY(val)        bfin_write16(DMA6_X_MODIFY,val)
+#define bfin_read_DMA6_Y_MODIFY()            bfin_read16(DMA6_Y_MODIFY)
+#define bfin_write_DMA6_Y_MODIFY(val)        bfin_write16(DMA6_Y_MODIFY,val)
+#define bfin_read_DMA6_CURR_DESC_PTR()       bfin_read32(DMA6_CURR_DESC_PTR)
+#define bfin_write_DMA6_CURR_DESC_PTR(val)   bfin_write32(DMA6_CURR_DESC_PTR,val)
+#define bfin_read_DMA6_CURR_ADDR()           bfin_read32(DMA6_CURR_ADDR)
+#define bfin_write_DMA6_CURR_ADDR(val)       bfin_write32(DMA6_CURR_ADDR,val)
+#define bfin_read_DMA6_CURR_X_COUNT()        bfin_read16(DMA6_CURR_X_COUNT)
+#define bfin_write_DMA6_CURR_X_COUNT(val)    bfin_write16(DMA6_CURR_X_COUNT,val)
+#define bfin_read_DMA6_CURR_Y_COUNT()        bfin_read16(DMA6_CURR_Y_COUNT)
+#define bfin_write_DMA6_CURR_Y_COUNT(val)    bfin_write16(DMA6_CURR_Y_COUNT,val)
+#define bfin_read_DMA6_IRQ_STATUS()          bfin_read16(DMA6_IRQ_STATUS)
+#define bfin_write_DMA6_IRQ_STATUS(val)      bfin_write16(DMA6_IRQ_STATUS,val)
+#define bfin_read_DMA6_PERIPHERAL_MAP()      bfin_read16(DMA6_PERIPHERAL_MAP)
+#define bfin_write_DMA6_PERIPHERAL_MAP(val)  bfin_write16(DMA6_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA7_CONFIG()              bfin_read16(DMA7_CONFIG)
+#define bfin_write_DMA7_CONFIG(val)          bfin_write16(DMA7_CONFIG,val)
+#define bfin_read_DMA7_NEXT_DESC_PTR()       bfin_read32(DMA7_NEXT_DESC_PTR)
+#define bfin_write_DMA7_NEXT_DESC_PTR(val)   bfin_write32(DMA7_NEXT_DESC_PTR,val)
+#define bfin_read_DMA7_START_ADDR()          bfin_read32(DMA7_START_ADDR)
+#define bfin_write_DMA7_START_ADDR(val)      bfin_write32(DMA7_START_ADDR,val)
+#define bfin_read_DMA7_X_COUNT()             bfin_read16(DMA7_X_COUNT)
+#define bfin_write_DMA7_X_COUNT(val)         bfin_write16(DMA7_X_COUNT,val)
+#define bfin_read_DMA7_Y_COUNT()             bfin_read16(DMA7_Y_COUNT)
+#define bfin_write_DMA7_Y_COUNT(val)         bfin_write16(DMA7_Y_COUNT,val)
+#define bfin_read_DMA7_X_MODIFY()            bfin_read16(DMA7_X_MODIFY)
+#define bfin_write_DMA7_X_MODIFY(val)        bfin_write16(DMA7_X_MODIFY,val)
+#define bfin_read_DMA7_Y_MODIFY()            bfin_read16(DMA7_Y_MODIFY)
+#define bfin_write_DMA7_Y_MODIFY(val)        bfin_write16(DMA7_Y_MODIFY,val)
+#define bfin_read_DMA7_CURR_DESC_PTR()       bfin_read32(DMA7_CURR_DESC_PTR)
+#define bfin_write_DMA7_CURR_DESC_PTR(val)   bfin_write32(DMA7_CURR_DESC_PTR,val)
+#define bfin_read_DMA7_CURR_ADDR()           bfin_read32(DMA7_CURR_ADDR)
+#define bfin_write_DMA7_CURR_ADDR(val)       bfin_write32(DMA7_CURR_ADDR,val)
+#define bfin_read_DMA7_CURR_X_COUNT()        bfin_read16(DMA7_CURR_X_COUNT)
+#define bfin_write_DMA7_CURR_X_COUNT(val)    bfin_write16(DMA7_CURR_X_COUNT,val)
+#define bfin_read_DMA7_CURR_Y_COUNT()        bfin_read16(DMA7_CURR_Y_COUNT)
+#define bfin_write_DMA7_CURR_Y_COUNT(val)    bfin_write16(DMA7_CURR_Y_COUNT,val)
+#define bfin_read_DMA7_IRQ_STATUS()          bfin_read16(DMA7_IRQ_STATUS)
+#define bfin_write_DMA7_IRQ_STATUS(val)      bfin_write16(DMA7_IRQ_STATUS,val)
+#define bfin_read_DMA7_PERIPHERAL_MAP()      bfin_read16(DMA7_PERIPHERAL_MAP)
+#define bfin_write_DMA7_PERIPHERAL_MAP(val)  bfin_write16(DMA7_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_D1_CONFIG()           bfin_read16(MDMA_D1_CONFIG)
+#define bfin_write_MDMA_D1_CONFIG(val)       bfin_write16(MDMA_D1_CONFIG,val)
+#define bfin_read_MDMA_D1_NEXT_DESC_PTR()    bfin_read32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D1_START_ADDR()       bfin_read32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val)   bfin_write32(MDMA_D1_START_ADDR,val)
+#define bfin_read_MDMA_D1_X_COUNT()          bfin_read16(MDMA_D1_X_COUNT)
+#define bfin_write_MDMA_D1_X_COUNT(val)      bfin_write16(MDMA_D1_X_COUNT,val)
+#define bfin_read_MDMA_D1_Y_COUNT()          bfin_read16(MDMA_D1_Y_COUNT)
+#define bfin_write_MDMA_D1_Y_COUNT(val)      bfin_write16(MDMA_D1_Y_COUNT,val)
+#define bfin_read_MDMA_D1_X_MODIFY()         bfin_read16(MDMA_D1_X_MODIFY)
+#define bfin_write_MDMA_D1_X_MODIFY(val)     bfin_write16(MDMA_D1_X_MODIFY,val)
+#define bfin_read_MDMA_D1_Y_MODIFY()         bfin_read16(MDMA_D1_Y_MODIFY)
+#define bfin_write_MDMA_D1_Y_MODIFY(val)     bfin_write16(MDMA_D1_Y_MODIFY,val)
+#define bfin_read_MDMA_D1_CURR_DESC_PTR()    bfin_read32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D1_CURR_ADDR()        bfin_read32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val)    bfin_write32(MDMA_D1_CURR_ADDR,val)
+#define bfin_read_MDMA_D1_CURR_X_COUNT()     bfin_read16(MDMA_D1_CURR_X_COUNT)
+#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D1_CURR_Y_COUNT()     bfin_read16(MDMA_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()       bfin_read16(MDMA_D1_IRQ_STATUS)
+#define bfin_write_MDMA_D1_IRQ_STATUS(val)   bfin_write16(MDMA_D1_IRQ_STATUS,val)
+#define bfin_read_MDMA_D1_PERIPHERAL_MAP()   bfin_read16(MDMA_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_S1_CONFIG()           bfin_read16(MDMA_S1_CONFIG)
+#define bfin_write_MDMA_S1_CONFIG(val)       bfin_write16(MDMA_S1_CONFIG,val)
+#define bfin_read_MDMA_S1_NEXT_DESC_PTR()    bfin_read32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S1_START_ADDR()       bfin_read32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val)   bfin_write32(MDMA_S1_START_ADDR,val)
+#define bfin_read_MDMA_S1_X_COUNT()          bfin_read16(MDMA_S1_X_COUNT)
+#define bfin_write_MDMA_S1_X_COUNT(val)      bfin_write16(MDMA_S1_X_COUNT,val)
+#define bfin_read_MDMA_S1_Y_COUNT()          bfin_read16(MDMA_S1_Y_COUNT)
+#define bfin_write_MDMA_S1_Y_COUNT(val)      bfin_write16(MDMA_S1_Y_COUNT,val)
+#define bfin_read_MDMA_S1_X_MODIFY()         bfin_read16(MDMA_S1_X_MODIFY)
+#define bfin_write_MDMA_S1_X_MODIFY(val)     bfin_write16(MDMA_S1_X_MODIFY,val)
+#define bfin_read_MDMA_S1_Y_MODIFY()         bfin_read16(MDMA_S1_Y_MODIFY)
+#define bfin_write_MDMA_S1_Y_MODIFY(val)     bfin_write16(MDMA_S1_Y_MODIFY,val)
+#define bfin_read_MDMA_S1_CURR_DESC_PTR()    bfin_read32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S1_CURR_ADDR()        bfin_read32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val)    bfin_write32(MDMA_S1_CURR_ADDR,val)
+#define bfin_read_MDMA_S1_CURR_X_COUNT()     bfin_read16(MDMA_S1_CURR_X_COUNT)
+#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S1_CURR_Y_COUNT()     bfin_read16(MDMA_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()       bfin_read16(MDMA_S1_IRQ_STATUS)
+#define bfin_write_MDMA_S1_IRQ_STATUS(val)   bfin_write16(MDMA_S1_IRQ_STATUS,val)
+#define bfin_read_MDMA_S1_PERIPHERAL_MAP()   bfin_read16(MDMA_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_D0_CONFIG()           bfin_read16(MDMA_D0_CONFIG)
+#define bfin_write_MDMA_D0_CONFIG(val)       bfin_write16(MDMA_D0_CONFIG,val)
+#define bfin_read_MDMA_D0_NEXT_DESC_PTR()    bfin_read32(MDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D0_START_ADDR()       bfin_read32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val)   bfin_write32(MDMA_D0_START_ADDR,val)
+#define bfin_read_MDMA_D0_X_COUNT()          bfin_read16(MDMA_D0_X_COUNT)
+#define bfin_write_MDMA_D0_X_COUNT(val)      bfin_write16(MDMA_D0_X_COUNT,val)
+#define bfin_read_MDMA_D0_Y_COUNT()          bfin_read16(MDMA_D0_Y_COUNT)
+#define bfin_write_MDMA_D0_Y_COUNT(val)      bfin_write16(MDMA_D0_Y_COUNT,val)
+#define bfin_read_MDMA_D0_X_MODIFY()         bfin_read16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val)     bfin_write16(MDMA_D0_X_MODIFY,val)
+#define bfin_read_MDMA_D0_Y_MODIFY()         bfin_read16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val)     bfin_write16(MDMA_D0_Y_MODIFY,val)
+#define bfin_read_MDMA_D0_CURR_DESC_PTR()    bfin_read32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D0_CURR_ADDR()        bfin_read32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val)    bfin_write32(MDMA_D0_CURR_ADDR,val)
+#define bfin_read_MDMA_D0_CURR_X_COUNT()     bfin_read16(MDMA_D0_CURR_X_COUNT)
+#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D0_CURR_Y_COUNT()     bfin_read16(MDMA_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D0_IRQ_STATUS()       bfin_read16(MDMA_D0_IRQ_STATUS)
+#define bfin_write_MDMA_D0_IRQ_STATUS(val)   bfin_write16(MDMA_D0_IRQ_STATUS,val)
+#define bfin_read_MDMA_D0_PERIPHERAL_MAP()   bfin_read16(MDMA_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_S0_CONFIG()           bfin_read16(MDMA_S0_CONFIG)
+#define bfin_write_MDMA_S0_CONFIG(val)       bfin_write16(MDMA_S0_CONFIG,val)
+#define bfin_read_MDMA_S0_NEXT_DESC_PTR()    bfin_read32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S0_START_ADDR()       bfin_read32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val)   bfin_write32(MDMA_S0_START_ADDR,val)
+#define bfin_read_MDMA_S0_X_COUNT()          bfin_read16(MDMA_S0_X_COUNT)
+#define bfin_write_MDMA_S0_X_COUNT(val)      bfin_write16(MDMA_S0_X_COUNT,val)
+#define bfin_read_MDMA_S0_Y_COUNT()          bfin_read16(MDMA_S0_Y_COUNT)
+#define bfin_write_MDMA_S0_Y_COUNT(val)      bfin_write16(MDMA_S0_Y_COUNT,val)
+#define bfin_read_MDMA_S0_X_MODIFY()         bfin_read16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val)     bfin_write16(MDMA_S0_X_MODIFY,val)
+#define bfin_read_MDMA_S0_Y_MODIFY()         bfin_read16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val)     bfin_write16(MDMA_S0_Y_MODIFY,val)
+#define bfin_read_MDMA_S0_CURR_DESC_PTR()    bfin_read32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S0_CURR_ADDR()        bfin_read32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val)    bfin_write32(MDMA_S0_CURR_ADDR,val)
+#define bfin_read_MDMA_S0_CURR_X_COUNT()     bfin_read16(MDMA_S0_CURR_X_COUNT)
+#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S0_CURR_Y_COUNT()     bfin_read16(MDMA_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S0_IRQ_STATUS()       bfin_read16(MDMA_S0_IRQ_STATUS)
+#define bfin_write_MDMA_S0_IRQ_STATUS(val)   bfin_write16(MDMA_S0_IRQ_STATUS,val)
+#define bfin_read_MDMA_S0_PERIPHERAL_MAP()   bfin_read16(MDMA_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP,val)
+
+/* Aysnchronous Memory Controller - External Bus Interface Unit (0xFFC0 3C00-0xFFC0 3FFF) */
+#define bfin_read_EBIU_AMGCTL()              bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val)          bfin_write16(EBIU_AMGCTL,val)
+#define bfin_read_EBIU_AMBCTL0()             bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val)         bfin_write32(EBIU_AMBCTL0,val)
+#define bfin_read_EBIU_AMBCTL1()             bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val)         bfin_write32(EBIU_AMBCTL1,val)
+
+/* SDRAM Controller External Bus Interface Unit (0xFFC0 4C00-0xFFC0 4FFF) */
+#define bfin_read_EBIU_SDGCTL()              bfin_read32(EBIU_SDGCTL)
+#define bfin_write_EBIU_SDGCTL(val)          bfin_write32(EBIU_SDGCTL,val)
+#define bfin_read_EBIU_SDRRC()               bfin_read16(EBIU_SDRRC)
+#define bfin_write_EBIU_SDRRC(val)           bfin_write16(EBIU_SDRRC,val)
+#define bfin_read_EBIU_SDSTAT()              bfin_read16(EBIU_SDSTAT)
+#define bfin_write_EBIU_SDSTAT(val)          bfin_write16(EBIU_SDSTAT,val)
+#define bfin_read_EBIU_SDBCTL()              bfin_read16(EBIU_SDBCTL)
+#define bfin_write_EBIU_SDBCTL(val)          bfin_write16(EBIU_SDBCTL,val)
+
+/* UART Controller */
+#define bfin_read_UART_THR()                 bfin_read16(UART_THR)
+#define bfin_write_UART_THR(val)             bfin_write16(UART_THR,val)
+#define bfin_read_UART_RBR()                 bfin_read16(UART_RBR)
+#define bfin_write_UART_RBR(val)             bfin_write16(UART_RBR,val)
+#define bfin_read_UART_DLL()                 bfin_read16(UART_DLL)
+#define bfin_write_UART_DLL(val)             bfin_write16(UART_DLL,val)
+#define bfin_read_UART_IER()                 bfin_read16(UART_IER)
+#define bfin_write_UART_IER(val)             bfin_write16(UART_IER,val)
+#define bfin_read_UART_DLH()                 bfin_read16(UART_DLH)
+#define bfin_write_UART_DLH(val)             bfin_write16(UART_DLH,val)
+#define bfin_read_UART_IIR()                 bfin_read16(UART_IIR)
+#define bfin_write_UART_IIR(val)             bfin_write16(UART_IIR,val)
+#define bfin_read_UART_LCR()                 bfin_read16(UART_LCR)
+#define bfin_write_UART_LCR(val)             bfin_write16(UART_LCR,val)
+#define bfin_read_UART_MCR()                 bfin_read16(UART_MCR)
+#define bfin_write_UART_MCR(val)             bfin_write16(UART_MCR,val)
+#define bfin_read_UART_LSR()                 bfin_read16(UART_LSR)
+#define bfin_write_UART_LSR(val)             bfin_write16(UART_LSR,val)
+/*
+#define UART_MSR
+*/
+#define bfin_read_UART_SCR()                 bfin_read16(UART_SCR)
+#define bfin_write_UART_SCR(val)             bfin_write16(UART_SCR,val)
+#define bfin_read_UART_GCTL()                bfin_read16(UART_GCTL)
+#define bfin_write_UART_GCTL(val)            bfin_write16(UART_GCTL,val)
+
+/* SPI Controller */
+#define bfin_read_SPI_CTL()                  bfin_read16(SPI_CTL)
+#define bfin_write_SPI_CTL(val)              bfin_write16(SPI_CTL,val)
+#define bfin_read_SPI_FLG()                  bfin_read16(SPI_FLG)
+#define bfin_write_SPI_FLG(val)              bfin_write16(SPI_FLG,val)
+#define bfin_read_SPI_STAT()                 bfin_read16(SPI_STAT)
+#define bfin_write_SPI_STAT(val)             bfin_write16(SPI_STAT,val)
+#define bfin_read_SPI_TDBR()                 bfin_read16(SPI_TDBR)
+#define bfin_write_SPI_TDBR(val)             bfin_write16(SPI_TDBR,val)
+#define bfin_read_SPI_RDBR()                 bfin_read16(SPI_RDBR)
+#define bfin_write_SPI_RDBR(val)             bfin_write16(SPI_RDBR,val)
+#define bfin_read_SPI_BAUD()                 bfin_read16(SPI_BAUD)
+#define bfin_write_SPI_BAUD(val)             bfin_write16(SPI_BAUD,val)
+#define bfin_read_SPI_SHADOW()               bfin_read16(SPI_SHADOW)
+#define bfin_write_SPI_SHADOW(val)           bfin_write16(SPI_SHADOW,val)
+
+/* TIMER 0, 1, 2 Registers */
+#define bfin_read_TIMER0_CONFIG()            bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val)        bfin_write16(TIMER0_CONFIG,val)
+#define bfin_read_TIMER0_COUNTER()           bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val)       bfin_write32(TIMER0_COUNTER,val)
+#define bfin_read_TIMER0_PERIOD()            bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val)        bfin_write32(TIMER0_PERIOD,val)
+#define bfin_read_TIMER0_WIDTH()             bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val)         bfin_write32(TIMER0_WIDTH,val)
+
+#define bfin_read_TIMER1_CONFIG()            bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val)        bfin_write16(TIMER1_CONFIG,val)
+#define bfin_read_TIMER1_COUNTER()           bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val)       bfin_write32(TIMER1_COUNTER,val)
+#define bfin_read_TIMER1_PERIOD()            bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val)        bfin_write32(TIMER1_PERIOD,val)
+#define bfin_read_TIMER1_WIDTH()             bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val)         bfin_write32(TIMER1_WIDTH,val)
+
+#define bfin_read_TIMER2_CONFIG()            bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val)        bfin_write16(TIMER2_CONFIG,val)
+#define bfin_read_TIMER2_COUNTER()           bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val)       bfin_write32(TIMER2_COUNTER,val)
+#define bfin_read_TIMER2_PERIOD()            bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val)        bfin_write32(TIMER2_PERIOD,val)
+#define bfin_read_TIMER2_WIDTH()             bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val)         bfin_write32(TIMER2_WIDTH,val)
+
+#define bfin_read_TIMER_ENABLE()             bfin_read16(TIMER_ENABLE)
+#define bfin_write_TIMER_ENABLE(val)         bfin_write16(TIMER_ENABLE,val)
+#define bfin_read_TIMER_DISABLE()            bfin_read16(TIMER_DISABLE)
+#define bfin_write_TIMER_DISABLE(val)        bfin_write16(TIMER_DISABLE,val)
+#define bfin_read_TIMER_STATUS()             bfin_read16(TIMER_STATUS)
+#define bfin_write_TIMER_STATUS(val)         bfin_write16(TIMER_STATUS,val)
+
+/* SPORT0 Controller */
+#define bfin_read_SPORT0_TCR1()              bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val)          bfin_write16(SPORT0_TCR1,val)
+#define bfin_read_SPORT0_TCR2()              bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val)          bfin_write16(SPORT0_TCR2,val)
+#define bfin_read_SPORT0_TCLKDIV()           bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val)       bfin_write16(SPORT0_TCLKDIV,val)
+#define bfin_read_SPORT0_TFSDIV()            bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val)        bfin_write16(SPORT0_TFSDIV,val)
+#define bfin_read_SPORT0_TX()                bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val)            bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX()                bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val)            bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX32()              bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX32(val)          bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX32()              bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX32(val)          bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX16()              bfin_read16(SPORT0_TX)
+#define bfin_write_SPORT0_TX16(val)          bfin_write16(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX16()              bfin_read16(SPORT0_RX)
+#define bfin_write_SPORT0_RX16(val)          bfin_write16(SPORT0_RX,val)
+#define bfin_read_SPORT0_RCR1()              bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val)          bfin_write16(SPORT0_RCR1,val)
+#define bfin_read_SPORT0_RCR2()              bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val)          bfin_write16(SPORT0_RCR2,val)
+#define bfin_read_SPORT0_RCLKDIV()           bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val)       bfin_write16(SPORT0_RCLKDIV,val)
+#define bfin_read_SPORT0_RFSDIV()            bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val)        bfin_write16(SPORT0_RFSDIV,val)
+#define bfin_read_SPORT0_STAT()              bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val)          bfin_write16(SPORT0_STAT,val)
+#define bfin_read_SPORT0_CHNL()              bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val)          bfin_write16(SPORT0_CHNL,val)
+#define bfin_read_SPORT0_MCMC1()             bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val)         bfin_write16(SPORT0_MCMC1,val)
+#define bfin_read_SPORT0_MCMC2()             bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val)         bfin_write16(SPORT0_MCMC2,val)
+#define bfin_read_SPORT0_MTCS0()             bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val)         bfin_write32(SPORT0_MTCS0,val)
+#define bfin_read_SPORT0_MTCS1()             bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val)         bfin_write32(SPORT0_MTCS1,val)
+#define bfin_read_SPORT0_MTCS2()             bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val)         bfin_write32(SPORT0_MTCS2,val)
+#define bfin_read_SPORT0_MTCS3()             bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val)         bfin_write32(SPORT0_MTCS3,val)
+#define bfin_read_SPORT0_MRCS0()             bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val)         bfin_write32(SPORT0_MRCS0,val)
+#define bfin_read_SPORT0_MRCS1()             bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val)         bfin_write32(SPORT0_MRCS1,val)
+#define bfin_read_SPORT0_MRCS2()             bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val)         bfin_write32(SPORT0_MRCS2,val)
+#define bfin_read_SPORT0_MRCS3()             bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val)         bfin_write32(SPORT0_MRCS3,val)
+
+/* SPORT1 Controller */
+#define bfin_read_SPORT1_TCR1()              bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val)          bfin_write16(SPORT1_TCR1,val)
+#define bfin_read_SPORT1_TCR2()              bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val)          bfin_write16(SPORT1_TCR2,val)
+#define bfin_read_SPORT1_TCLKDIV()           bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val)       bfin_write16(SPORT1_TCLKDIV,val)
+#define bfin_read_SPORT1_TFSDIV()            bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val)        bfin_write16(SPORT1_TFSDIV,val)
+#define bfin_read_SPORT1_TX()                bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val)            bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX()                bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val)            bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX32()              bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX32(val)          bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX32()              bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX32(val)          bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX16()              bfin_read16(SPORT1_TX)
+#define bfin_write_SPORT1_TX16(val)          bfin_write16(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX16()              bfin_read16(SPORT1_RX)
+#define bfin_write_SPORT1_RX16(val)          bfin_write16(SPORT1_RX,val)
+#define bfin_read_SPORT1_RCR1()              bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val)          bfin_write16(SPORT1_RCR1,val)
+#define bfin_read_SPORT1_RCR2()              bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val)          bfin_write16(SPORT1_RCR2,val)
+#define bfin_read_SPORT1_RCLKDIV()           bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val)       bfin_write16(SPORT1_RCLKDIV,val)
+#define bfin_read_SPORT1_RFSDIV()            bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val)        bfin_write16(SPORT1_RFSDIV,val)
+#define bfin_read_SPORT1_STAT()              bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val)          bfin_write16(SPORT1_STAT,val)
+#define bfin_read_SPORT1_CHNL()              bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val)          bfin_write16(SPORT1_CHNL,val)
+#define bfin_read_SPORT1_MCMC1()             bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val)         bfin_write16(SPORT1_MCMC1,val)
+#define bfin_read_SPORT1_MCMC2()             bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val)         bfin_write16(SPORT1_MCMC2,val)
+#define bfin_read_SPORT1_MTCS0()             bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val)         bfin_write32(SPORT1_MTCS0,val)
+#define bfin_read_SPORT1_MTCS1()             bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val)         bfin_write32(SPORT1_MTCS1,val)
+#define bfin_read_SPORT1_MTCS2()             bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val)         bfin_write32(SPORT1_MTCS2,val)
+#define bfin_read_SPORT1_MTCS3()             bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val)         bfin_write32(SPORT1_MTCS3,val)
+#define bfin_read_SPORT1_MRCS0()             bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val)         bfin_write32(SPORT1_MRCS0,val)
+#define bfin_read_SPORT1_MRCS1()             bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val)         bfin_write32(SPORT1_MRCS1,val)
+#define bfin_read_SPORT1_MRCS2()             bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val)         bfin_write32(SPORT1_MRCS2,val)
+#define bfin_read_SPORT1_MRCS3()             bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val)         bfin_write32(SPORT1_MRCS3,val)
+
+/* Parallel Peripheral Interface (PPI) */
+#define bfin_read_PPI_CONTROL()              bfin_read16(PPI_CONTROL)
+#define bfin_write_PPI_CONTROL(val)          bfin_write16(PPI_CONTROL,val)
+#define bfin_read_PPI_STATUS()               bfin_read16(PPI_STATUS)
+#define bfin_write_PPI_STATUS(val)           bfin_write16(PPI_STATUS,val)
+#define bfin_clear_PPI_STATUS()              bfin_read_PPI_STATUS()
+#define bfin_read_PPI_DELAY()                bfin_read16(PPI_DELAY)
+#define bfin_write_PPI_DELAY(val)            bfin_write16(PPI_DELAY,val)
+#define bfin_read_PPI_COUNT()                bfin_read16(PPI_COUNT)
+#define bfin_write_PPI_COUNT(val)            bfin_write16(PPI_COUNT,val)
+#define bfin_read_PPI_FRAME()                bfin_read16(PPI_FRAME)
+#define bfin_write_PPI_FRAME(val)            bfin_write16(PPI_FRAME,val)
+
+#endif				/* _CDEF_BF532_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/defBF532.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/defBF532.h
new file mode 100644
index 0000000..d438150
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -0,0 +1,831 @@
+/*
+ * System & MMR bit and Address definitions for ADSP-BF532
+ *
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF532_H
+#define _DEF_BF532_H
+
+/*********************************************************************************** */
+/* System MMR Register Map */
+/*********************************************************************************** */
+/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
+
+#define PLL_CTL                0xFFC00000	/* PLL Control register (16-bit) */
+#define PLL_DIV			 0xFFC00004	/* PLL Divide Register (16-bit) */
+#define VR_CTL			 0xFFC00008	/* Voltage Regulator Control Register (16-bit) */
+#define PLL_STAT               0xFFC0000C	/* PLL Status register (16-bit) */
+#define PLL_LOCKCNT            0xFFC00010	/* PLL Lock Count register (16-bit) */
+#define CHIPID                 0xFFC00014       /* Chip ID Register */
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
+#define SWRST			0xFFC00100  /* Software Reset Register (16-bit) */
+#define SYSCR			0xFFC00104  /* System Configuration registe */
+#define SIC_RVECT             		0xFFC00108	/* Interrupt Reset Vector Address Register */
+#define SIC_IMASK             		0xFFC0010C	/* Interrupt Mask Register */
+#define SIC_IAR0               		0xFFC00110	/* Interrupt Assignment Register 0 */
+#define SIC_IAR1               		0xFFC00114	/* Interrupt Assignment Register 1 */
+#define SIC_IAR2              		0xFFC00118	/* Interrupt Assignment Register 2 */
+#define SIC_ISR                		0xFFC00120	/* Interrupt Status Register */
+#define SIC_IWR                		0xFFC00124	/* Interrupt Wakeup Register */
+
+/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
+#define WDOG_CTL                	0xFFC00200	/* Watchdog Control Register */
+#define WDOG_CNT                	0xFFC00204	/* Watchdog Count Register */
+#define WDOG_STAT               	0xFFC00208	/* Watchdog Status Register */
+
+/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
+#define RTC_STAT                	0xFFC00300	/* RTC Status Register */
+#define RTC_ICTL                	0xFFC00304	/* RTC Interrupt Control Register */
+#define RTC_ISTAT               	0xFFC00308	/* RTC Interrupt Status Register */
+#define RTC_SWCNT               	0xFFC0030C	/* RTC Stopwatch Count Register */
+#define RTC_ALARM               	0xFFC00310	/* RTC Alarm Time Register */
+#define RTC_FAST                	0xFFC00314	/* RTC Prescaler Enable Register */
+#define RTC_PREN			0xFFC00314	/* RTC Prescaler Enable Register (alternate macro) */
+
+/* UART Controller (0xFFC00400 - 0xFFC004FF) */
+
+/*
+ * Because include/linux/serial_reg.h have defined UART_*,
+ * So we define blackfin uart regs to BFIN_UART_*.
+ */
+#define BFIN_UART_THR			0xFFC00400	/* Transmit Holding register */
+#define BFIN_UART_RBR			0xFFC00400	/* Receive Buffer register */
+#define BFIN_UART_DLL			0xFFC00400	/* Divisor Latch (Low-Byte) */
+#define BFIN_UART_IER			0xFFC00404	/* Interrupt Enable Register */
+#define BFIN_UART_DLH			0xFFC00404	/* Divisor Latch (High-Byte) */
+#define BFIN_UART_IIR			0xFFC00408	/* Interrupt Identification Register */
+#define BFIN_UART_LCR			0xFFC0040C	/* Line Control Register */
+#define BFIN_UART_MCR			0xFFC00410	/* Modem Control Register */
+#define BFIN_UART_LSR			0xFFC00414	/* Line Status Register */
+#if 0
+#define BFIN_UART_MSR			0xFFC00418	/* Modem Status Register (UNUSED in ADSP-BF532) */
+#endif
+#define BFIN_UART_SCR			0xFFC0041C	/* SCR Scratch Register */
+#define BFIN_UART_GCTL			0xFFC00424	/* Global Control Register */
+
+/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define SPI0_REGBASE          		0xFFC00500
+#define SPI_CTL               		0xFFC00500	/* SPI Control Register */
+#define SPI_FLG               		0xFFC00504	/* SPI Flag register */
+#define SPI_STAT              		0xFFC00508	/* SPI Status register */
+#define SPI_TDBR              		0xFFC0050C	/* SPI Transmit Data Buffer Register */
+#define SPI_RDBR              		0xFFC00510	/* SPI Receive Data Buffer Register */
+#define SPI_BAUD              		0xFFC00514	/* SPI Baud rate Register */
+#define SPI_SHADOW            		0xFFC00518	/* SPI_RDBR Shadow Register */
+
+/* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */
+
+#define TIMER0_CONFIG          		0xFFC00600	/* Timer 0 Configuration Register */
+#define TIMER0_COUNTER			0xFFC00604	/* Timer 0 Counter Register */
+#define TIMER0_PERIOD       		0xFFC00608	/* Timer 0 Period Register */
+#define TIMER0_WIDTH        		0xFFC0060C	/* Timer 0 Width Register */
+
+#define TIMER1_CONFIG          		0xFFC00610	/*  Timer 1 Configuration Register   */
+#define TIMER1_COUNTER         		0xFFC00614	/*  Timer 1 Counter Register         */
+#define TIMER1_PERIOD          		0xFFC00618	/*  Timer 1 Period Register          */
+#define TIMER1_WIDTH           		0xFFC0061C	/*  Timer 1 Width Register           */
+
+#define TIMER2_CONFIG          		0xFFC00620	/* Timer 2 Configuration Register   */
+#define TIMER2_COUNTER         		0xFFC00624	/* Timer 2 Counter Register         */
+#define TIMER2_PERIOD          		0xFFC00628	/* Timer 2 Period Register          */
+#define TIMER2_WIDTH           		0xFFC0062C	/* Timer 2 Width Register           */
+
+#define TIMER_ENABLE			0xFFC00640	/* Timer Enable Register */
+#define TIMER_DISABLE			0xFFC00644	/* Timer Disable Register */
+#define TIMER_STATUS			0xFFC00648	/* Timer Status Register */
+
+/* General Purpose IO (0xFFC00700 - 0xFFC007FF) */
+
+#define FIO_FLAG_D	       		0xFFC00700	/* Flag Mask to directly specify state of pins */
+#define FIO_FLAG_C             		0xFFC00704	/* Peripheral Interrupt Flag Register (clear) */
+#define FIO_FLAG_S             		0xFFC00708	/* Peripheral Interrupt Flag Register (set) */
+#define FIO_FLAG_T			0xFFC0070C	/* Flag Mask to directly toggle state of pins */
+#define FIO_MASKA_D            		0xFFC00710	/* Flag Mask Interrupt A Register (set directly) */
+#define FIO_MASKA_C            		0xFFC00714	/* Flag Mask Interrupt A Register (clear) */
+#define FIO_MASKA_S            		0xFFC00718	/* Flag Mask Interrupt A Register (set) */
+#define FIO_MASKA_T            		0xFFC0071C	/* Flag Mask Interrupt A Register (toggle) */
+#define FIO_MASKB_D            		0xFFC00720	/* Flag Mask Interrupt B Register (set directly) */
+#define FIO_MASKB_C            		0xFFC00724	/* Flag Mask Interrupt B Register (clear) */
+#define FIO_MASKB_S            		0xFFC00728	/* Flag Mask Interrupt B Register (set) */
+#define FIO_MASKB_T            		0xFFC0072C	/* Flag Mask Interrupt B Register (toggle) */
+#define FIO_DIR                		0xFFC00730	/* Peripheral Flag Direction Register */
+#define FIO_POLAR              		0xFFC00734	/* Flag Source Polarity Register */
+#define FIO_EDGE               		0xFFC00738	/* Flag Source Sensitivity Register */
+#define FIO_BOTH               		0xFFC0073C	/* Flag Set on BOTH Edges Register */
+#define FIO_INEN					0xFFC00740	/* Flag Input Enable Register  */
+
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define SPORT0_TCR1     	 	0xFFC00800	/* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_TCR2      	 	0xFFC00804	/* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_TCLKDIV        		0xFFC00808	/* SPORT0 Transmit Clock Divider */
+#define SPORT0_TFSDIV          		0xFFC0080C	/* SPORT0 Transmit Frame Sync Divider */
+#define SPORT0_TX	             	0xFFC00810	/* SPORT0 TX Data Register */
+#define SPORT0_RX	            	0xFFC00818	/* SPORT0 RX Data Register */
+#define SPORT0_RCR1      	 	0xFFC00820	/* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_RCR2      	 	0xFFC00824	/* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_RCLKDIV        		0xFFC00828	/* SPORT0 Receive Clock Divider */
+#define SPORT0_RFSDIV          		0xFFC0082C	/* SPORT0 Receive Frame Sync Divider */
+#define SPORT0_STAT            		0xFFC00830	/* SPORT0 Status Register */
+#define SPORT0_CHNL            		0xFFC00834	/* SPORT0 Current Channel Register */
+#define SPORT0_MCMC1           		0xFFC00838	/* SPORT0 Multi-Channel Configuration Register 1 */
+#define SPORT0_MCMC2           		0xFFC0083C	/* SPORT0 Multi-Channel Configuration Register 2 */
+#define SPORT0_MTCS0           		0xFFC00840	/* SPORT0 Multi-Channel Transmit Select Register 0 */
+#define SPORT0_MTCS1           		0xFFC00844	/* SPORT0 Multi-Channel Transmit Select Register 1 */
+#define SPORT0_MTCS2           		0xFFC00848	/* SPORT0 Multi-Channel Transmit Select Register 2 */
+#define SPORT0_MTCS3           		0xFFC0084C	/* SPORT0 Multi-Channel Transmit Select Register 3 */
+#define SPORT0_MRCS0           		0xFFC00850	/* SPORT0 Multi-Channel Receive Select Register 0 */
+#define SPORT0_MRCS1           		0xFFC00854	/* SPORT0 Multi-Channel Receive Select Register 1 */
+#define SPORT0_MRCS2           		0xFFC00858	/* SPORT0 Multi-Channel Receive Select Register 2 */
+#define SPORT0_MRCS3           		0xFFC0085C	/* SPORT0 Multi-Channel Receive Select Register 3 */
+
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define SPORT1_TCR1     	 	0xFFC00900	/* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_TCR2      	 	0xFFC00904	/* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_TCLKDIV        		0xFFC00908	/* SPORT1 Transmit Clock Divider */
+#define SPORT1_TFSDIV          		0xFFC0090C	/* SPORT1 Transmit Frame Sync Divider */
+#define SPORT1_TX	             	0xFFC00910	/* SPORT1 TX Data Register */
+#define SPORT1_RX	            	0xFFC00918	/* SPORT1 RX Data Register */
+#define SPORT1_RCR1      	 	0xFFC00920	/* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_RCR2      	 	0xFFC00924	/* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_RCLKDIV        		0xFFC00928	/* SPORT1 Receive Clock Divider */
+#define SPORT1_RFSDIV          		0xFFC0092C	/* SPORT1 Receive Frame Sync Divider */
+#define SPORT1_STAT            		0xFFC00930	/* SPORT1 Status Register */
+#define SPORT1_CHNL            		0xFFC00934	/* SPORT1 Current Channel Register */
+#define SPORT1_MCMC1           		0xFFC00938	/* SPORT1 Multi-Channel Configuration Register 1 */
+#define SPORT1_MCMC2           		0xFFC0093C	/* SPORT1 Multi-Channel Configuration Register 2 */
+#define SPORT1_MTCS0           		0xFFC00940	/* SPORT1 Multi-Channel Transmit Select Register 0 */
+#define SPORT1_MTCS1           		0xFFC00944	/* SPORT1 Multi-Channel Transmit Select Register 1 */
+#define SPORT1_MTCS2           		0xFFC00948	/* SPORT1 Multi-Channel Transmit Select Register 2 */
+#define SPORT1_MTCS3           		0xFFC0094C	/* SPORT1 Multi-Channel Transmit Select Register 3 */
+#define SPORT1_MRCS0           		0xFFC00950	/* SPORT1 Multi-Channel Receive Select Register 0 */
+#define SPORT1_MRCS1           		0xFFC00954	/* SPORT1 Multi-Channel Receive Select Register 1 */
+#define SPORT1_MRCS2           		0xFFC00958	/* SPORT1 Multi-Channel Receive Select Register 2 */
+#define SPORT1_MRCS3           		0xFFC0095C	/* SPORT1 Multi-Channel Receive Select Register 3 */
+
+/* Asynchronous Memory Controller - External Bus Interface Unit  */
+#define EBIU_AMGCTL			0xFFC00A00	/* Asynchronous Memory Global Control Register */
+#define EBIU_AMBCTL0			0xFFC00A04	/* Asynchronous Memory Bank Control Register 0 */
+#define EBIU_AMBCTL1			0xFFC00A08	/* Asynchronous Memory Bank Control Register 1 */
+
+/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+
+#define EBIU_SDGCTL			0xFFC00A10	/* SDRAM Global Control Register */
+#define EBIU_SDBCTL			0xFFC00A14	/* SDRAM Bank Control Register */
+#define EBIU_SDRRC 			0xFFC00A18	/* SDRAM Refresh Rate Control Register */
+#define EBIU_SDSTAT			0xFFC00A1C	/* SDRAM Status Register */
+
+/* DMA Traffic controls */
+#define DMAC_TC_PER 0xFFC00B0C	/* Traffic Control Periods Register */
+#define DMAC_TC_CNT 0xFFC00B10	/* Traffic Control Current Counts Register */
+
+/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
+#define DMA0_CONFIG		0xFFC00C08	/* DMA Channel 0 Configuration Register */
+#define DMA0_NEXT_DESC_PTR	0xFFC00C00	/* DMA Channel 0 Next Descriptor Pointer Register */
+#define DMA0_START_ADDR		0xFFC00C04	/* DMA Channel 0 Start Address Register */
+#define DMA0_X_COUNT		0xFFC00C10	/* DMA Channel 0 X Count Register */
+#define DMA0_Y_COUNT		0xFFC00C18	/* DMA Channel 0 Y Count Register */
+#define DMA0_X_MODIFY		0xFFC00C14	/* DMA Channel 0 X Modify Register */
+#define DMA0_Y_MODIFY		0xFFC00C1C	/* DMA Channel 0 Y Modify Register */
+#define DMA0_CURR_DESC_PTR	0xFFC00C20	/* DMA Channel 0 Current Descriptor Pointer Register */
+#define DMA0_CURR_ADDR		0xFFC00C24	/* DMA Channel 0 Current Address Register */
+#define DMA0_CURR_X_COUNT	0xFFC00C30	/* DMA Channel 0 Current X Count Register */
+#define DMA0_CURR_Y_COUNT	0xFFC00C38	/* DMA Channel 0 Current Y Count Register */
+#define DMA0_IRQ_STATUS		0xFFC00C28	/* DMA Channel 0 Interrupt/Status Register */
+#define DMA0_PERIPHERAL_MAP	0xFFC00C2C	/* DMA Channel 0 Peripheral Map Register */
+
+#define DMA1_CONFIG		0xFFC00C48	/* DMA Channel 1 Configuration Register */
+#define DMA1_NEXT_DESC_PTR	0xFFC00C40	/* DMA Channel 1 Next Descriptor Pointer Register */
+#define DMA1_START_ADDR		0xFFC00C44	/* DMA Channel 1 Start Address Register */
+#define DMA1_X_COUNT		0xFFC00C50	/* DMA Channel 1 X Count Register */
+#define DMA1_Y_COUNT		0xFFC00C58	/* DMA Channel 1 Y Count Register */
+#define DMA1_X_MODIFY		0xFFC00C54	/* DMA Channel 1 X Modify Register */
+#define DMA1_Y_MODIFY		0xFFC00C5C	/* DMA Channel 1 Y Modify Register */
+#define DMA1_CURR_DESC_PTR	0xFFC00C60	/* DMA Channel 1 Current Descriptor Pointer Register */
+#define DMA1_CURR_ADDR		0xFFC00C64	/* DMA Channel 1 Current Address Register */
+#define DMA1_CURR_X_COUNT	0xFFC00C70	/* DMA Channel 1 Current X Count Register */
+#define DMA1_CURR_Y_COUNT	0xFFC00C78	/* DMA Channel 1 Current Y Count Register */
+#define DMA1_IRQ_STATUS		0xFFC00C68	/* DMA Channel 1 Interrupt/Status Register */
+#define DMA1_PERIPHERAL_MAP	0xFFC00C6C	/* DMA Channel 1 Peripheral Map Register */
+
+#define DMA2_CONFIG		0xFFC00C88	/* DMA Channel 2 Configuration Register */
+#define DMA2_NEXT_DESC_PTR	0xFFC00C80	/* DMA Channel 2 Next Descriptor Pointer Register */
+#define DMA2_START_ADDR		0xFFC00C84	/* DMA Channel 2 Start Address Register */
+#define DMA2_X_COUNT		0xFFC00C90	/* DMA Channel 2 X Count Register */
+#define DMA2_Y_COUNT		0xFFC00C98	/* DMA Channel 2 Y Count Register */
+#define DMA2_X_MODIFY		0xFFC00C94	/* DMA Channel 2 X Modify Register */
+#define DMA2_Y_MODIFY		0xFFC00C9C	/* DMA Channel 2 Y Modify Register */
+#define DMA2_CURR_DESC_PTR	0xFFC00CA0	/* DMA Channel 2 Current Descriptor Pointer Register */
+#define DMA2_CURR_ADDR		0xFFC00CA4	/* DMA Channel 2 Current Address Register */
+#define DMA2_CURR_X_COUNT	0xFFC00CB0	/* DMA Channel 2 Current X Count Register */
+#define DMA2_CURR_Y_COUNT	0xFFC00CB8	/* DMA Channel 2 Current Y Count Register */
+#define DMA2_IRQ_STATUS		0xFFC00CA8	/* DMA Channel 2 Interrupt/Status Register */
+#define DMA2_PERIPHERAL_MAP	0xFFC00CAC	/* DMA Channel 2 Peripheral Map Register */
+
+#define DMA3_CONFIG		0xFFC00CC8	/* DMA Channel 3 Configuration Register */
+#define DMA3_NEXT_DESC_PTR	0xFFC00CC0	/* DMA Channel 3 Next Descriptor Pointer Register */
+#define DMA3_START_ADDR		0xFFC00CC4	/* DMA Channel 3 Start Address Register */
+#define DMA3_X_COUNT		0xFFC00CD0	/* DMA Channel 3 X Count Register */
+#define DMA3_Y_COUNT		0xFFC00CD8	/* DMA Channel 3 Y Count Register */
+#define DMA3_X_MODIFY		0xFFC00CD4	/* DMA Channel 3 X Modify Register */
+#define DMA3_Y_MODIFY		0xFFC00CDC	/* DMA Channel 3 Y Modify Register */
+#define DMA3_CURR_DESC_PTR	0xFFC00CE0	/* DMA Channel 3 Current Descriptor Pointer Register */
+#define DMA3_CURR_ADDR		0xFFC00CE4	/* DMA Channel 3 Current Address Register */
+#define DMA3_CURR_X_COUNT	0xFFC00CF0	/* DMA Channel 3 Current X Count Register */
+#define DMA3_CURR_Y_COUNT	0xFFC00CF8	/* DMA Channel 3 Current Y Count Register */
+#define DMA3_IRQ_STATUS		0xFFC00CE8	/* DMA Channel 3 Interrupt/Status Register */
+#define DMA3_PERIPHERAL_MAP	0xFFC00CEC	/* DMA Channel 3 Peripheral Map Register */
+
+#define DMA4_CONFIG		0xFFC00D08	/* DMA Channel 4 Configuration Register */
+#define DMA4_NEXT_DESC_PTR	0xFFC00D00	/* DMA Channel 4 Next Descriptor Pointer Register */
+#define DMA4_START_ADDR		0xFFC00D04	/* DMA Channel 4 Start Address Register */
+#define DMA4_X_COUNT		0xFFC00D10	/* DMA Channel 4 X Count Register */
+#define DMA4_Y_COUNT		0xFFC00D18	/* DMA Channel 4 Y Count Register */
+#define DMA4_X_MODIFY		0xFFC00D14	/* DMA Channel 4 X Modify Register */
+#define DMA4_Y_MODIFY		0xFFC00D1C	/* DMA Channel 4 Y Modify Register */
+#define DMA4_CURR_DESC_PTR	0xFFC00D20	/* DMA Channel 4 Current Descriptor Pointer Register */
+#define DMA4_CURR_ADDR		0xFFC00D24	/* DMA Channel 4 Current Address Register */
+#define DMA4_CURR_X_COUNT	0xFFC00D30	/* DMA Channel 4 Current X Count Register */
+#define DMA4_CURR_Y_COUNT	0xFFC00D38	/* DMA Channel 4 Current Y Count Register */
+#define DMA4_IRQ_STATUS		0xFFC00D28	/* DMA Channel 4 Interrupt/Status Register */
+#define DMA4_PERIPHERAL_MAP	0xFFC00D2C	/* DMA Channel 4 Peripheral Map Register */
+
+#define DMA5_CONFIG		0xFFC00D48	/* DMA Channel 5 Configuration Register */
+#define DMA5_NEXT_DESC_PTR	0xFFC00D40	/* DMA Channel 5 Next Descriptor Pointer Register */
+#define DMA5_START_ADDR		0xFFC00D44	/* DMA Channel 5 Start Address Register */
+#define DMA5_X_COUNT		0xFFC00D50	/* DMA Channel 5 X Count Register */
+#define DMA5_Y_COUNT		0xFFC00D58	/* DMA Channel 5 Y Count Register */
+#define DMA5_X_MODIFY		0xFFC00D54	/* DMA Channel 5 X Modify Register */
+#define DMA5_Y_MODIFY		0xFFC00D5C	/* DMA Channel 5 Y Modify Register */
+#define DMA5_CURR_DESC_PTR	0xFFC00D60	/* DMA Channel 5 Current Descriptor Pointer Register */
+#define DMA5_CURR_ADDR		0xFFC00D64	/* DMA Channel 5 Current Address Register */
+#define DMA5_CURR_X_COUNT	0xFFC00D70	/* DMA Channel 5 Current X Count Register */
+#define DMA5_CURR_Y_COUNT	0xFFC00D78	/* DMA Channel 5 Current Y Count Register */
+#define DMA5_IRQ_STATUS		0xFFC00D68	/* DMA Channel 5 Interrupt/Status Register */
+#define DMA5_PERIPHERAL_MAP	0xFFC00D6C	/* DMA Channel 5 Peripheral Map Register */
+
+#define DMA6_CONFIG		0xFFC00D88	/* DMA Channel 6 Configuration Register */
+#define DMA6_NEXT_DESC_PTR	0xFFC00D80	/* DMA Channel 6 Next Descriptor Pointer Register */
+#define DMA6_START_ADDR		0xFFC00D84	/* DMA Channel 6 Start Address Register */
+#define DMA6_X_COUNT		0xFFC00D90	/* DMA Channel 6 X Count Register */
+#define DMA6_Y_COUNT		0xFFC00D98	/* DMA Channel 6 Y Count Register */
+#define DMA6_X_MODIFY		0xFFC00D94	/* DMA Channel 6 X Modify Register */
+#define DMA6_Y_MODIFY		0xFFC00D9C	/* DMA Channel 6 Y Modify Register */
+#define DMA6_CURR_DESC_PTR	0xFFC00DA0	/* DMA Channel 6 Current Descriptor Pointer Register */
+#define DMA6_CURR_ADDR		0xFFC00DA4	/* DMA Channel 6 Current Address Register */
+#define DMA6_CURR_X_COUNT	0xFFC00DB0	/* DMA Channel 6 Current X Count Register */
+#define DMA6_CURR_Y_COUNT	0xFFC00DB8	/* DMA Channel 6 Current Y Count Register */
+#define DMA6_IRQ_STATUS		0xFFC00DA8	/* DMA Channel 6 Interrupt/Status Register */
+#define DMA6_PERIPHERAL_MAP	0xFFC00DAC	/* DMA Channel 6 Peripheral Map Register */
+
+#define DMA7_CONFIG		0xFFC00DC8	/* DMA Channel 7 Configuration Register */
+#define DMA7_NEXT_DESC_PTR	0xFFC00DC0	/* DMA Channel 7 Next Descriptor Pointer Register */
+#define DMA7_START_ADDR		0xFFC00DC4	/* DMA Channel 7 Start Address Register */
+#define DMA7_X_COUNT		0xFFC00DD0	/* DMA Channel 7 X Count Register */
+#define DMA7_Y_COUNT		0xFFC00DD8	/* DMA Channel 7 Y Count Register */
+#define DMA7_X_MODIFY		0xFFC00DD4	/* DMA Channel 7 X Modify Register */
+#define DMA7_Y_MODIFY		0xFFC00DDC	/* DMA Channel 7 Y Modify Register */
+#define DMA7_CURR_DESC_PTR	0xFFC00DE0	/* DMA Channel 7 Current Descriptor Pointer Register */
+#define DMA7_CURR_ADDR		0xFFC00DE4	/* DMA Channel 7 Current Address Register */
+#define DMA7_CURR_X_COUNT	0xFFC00DF0	/* DMA Channel 7 Current X Count Register */
+#define DMA7_CURR_Y_COUNT	0xFFC00DF8	/* DMA Channel 7 Current Y Count Register */
+#define DMA7_IRQ_STATUS		0xFFC00DE8	/* DMA Channel 7 Interrupt/Status Register */
+#define DMA7_PERIPHERAL_MAP	0xFFC00DEC	/* DMA Channel 7 Peripheral Map Register */
+
+#define MDMA_D1_CONFIG		0xFFC00E88	/* MemDMA Stream 1 Destination Configuration Register */
+#define MDMA_D1_NEXT_DESC_PTR	0xFFC00E80	/* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
+#define MDMA_D1_START_ADDR	0xFFC00E84	/* MemDMA Stream 1 Destination Start Address Register */
+#define MDMA_D1_X_COUNT		0xFFC00E90	/* MemDMA Stream 1 Destination X Count Register */
+#define MDMA_D1_Y_COUNT		0xFFC00E98	/* MemDMA Stream 1 Destination Y Count Register */
+#define MDMA_D1_X_MODIFY	0xFFC00E94	/* MemDMA Stream 1 Destination X Modify Register */
+#define MDMA_D1_Y_MODIFY	0xFFC00E9C	/* MemDMA Stream 1 Destination Y Modify Register */
+#define MDMA_D1_CURR_DESC_PTR	0xFFC00EA0	/* MemDMA Stream 1 Destination Current Descriptor Pointer Register */
+#define MDMA_D1_CURR_ADDR	0xFFC00EA4	/* MemDMA Stream 1 Destination Current Address Register */
+#define MDMA_D1_CURR_X_COUNT	0xFFC00EB0	/* MemDMA Stream 1 Destination Current X Count Register */
+#define MDMA_D1_CURR_Y_COUNT	0xFFC00EB8	/* MemDMA Stream 1 Destination Current Y Count Register */
+#define MDMA_D1_IRQ_STATUS	0xFFC00EA8	/* MemDMA Stream 1 Destination Interrupt/Status Register */
+#define MDMA_D1_PERIPHERAL_MAP	0xFFC00EAC	/* MemDMA Stream 1 Destination Peripheral Map Register */
+
+#define MDMA_S1_CONFIG		0xFFC00EC8	/* MemDMA Stream 1 Source Configuration Register */
+#define MDMA_S1_NEXT_DESC_PTR	0xFFC00EC0	/* MemDMA Stream 1 Source Next Descriptor Pointer Register */
+#define MDMA_S1_START_ADDR	0xFFC00EC4	/* MemDMA Stream 1 Source Start Address Register */
+#define MDMA_S1_X_COUNT		0xFFC00ED0	/* MemDMA Stream 1 Source X Count Register */
+#define MDMA_S1_Y_COUNT		0xFFC00ED8	/* MemDMA Stream 1 Source Y Count Register */
+#define MDMA_S1_X_MODIFY	0xFFC00ED4	/* MemDMA Stream 1 Source X Modify Register */
+#define MDMA_S1_Y_MODIFY	0xFFC00EDC	/* MemDMA Stream 1 Source Y Modify Register */
+#define MDMA_S1_CURR_DESC_PTR	0xFFC00EE0	/* MemDMA Stream 1 Source Current Descriptor Pointer Register */
+#define MDMA_S1_CURR_ADDR	0xFFC00EE4	/* MemDMA Stream 1 Source Current Address Register */
+#define MDMA_S1_CURR_X_COUNT	0xFFC00EF0	/* MemDMA Stream 1 Source Current X Count Register */
+#define MDMA_S1_CURR_Y_COUNT	0xFFC00EF8	/* MemDMA Stream 1 Source Current Y Count Register */
+#define MDMA_S1_IRQ_STATUS	0xFFC00EE8	/* MemDMA Stream 1 Source Interrupt/Status Register */
+#define MDMA_S1_PERIPHERAL_MAP	0xFFC00EEC	/* MemDMA Stream 1 Source Peripheral Map Register */
+
+#define MDMA_D0_CONFIG		0xFFC00E08	/* MemDMA Stream 0 Destination Configuration Register */
+#define MDMA_D0_NEXT_DESC_PTR	0xFFC00E00	/* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
+#define MDMA_D0_START_ADDR	0xFFC00E04	/* MemDMA Stream 0 Destination Start Address Register */
+#define MDMA_D0_X_COUNT		0xFFC00E10	/* MemDMA Stream 0 Destination X Count Register */
+#define MDMA_D0_Y_COUNT		0xFFC00E18	/* MemDMA Stream 0 Destination Y Count Register */
+#define MDMA_D0_X_MODIFY	0xFFC00E14	/* MemDMA Stream 0 Destination X Modify Register */
+#define MDMA_D0_Y_MODIFY	0xFFC00E1C	/* MemDMA Stream 0 Destination Y Modify Register */
+#define MDMA_D0_CURR_DESC_PTR	0xFFC00E20	/* MemDMA Stream 0 Destination Current Descriptor Pointer Register */
+#define MDMA_D0_CURR_ADDR	0xFFC00E24	/* MemDMA Stream 0 Destination Current Address Register */
+#define MDMA_D0_CURR_X_COUNT	0xFFC00E30	/* MemDMA Stream 0 Destination Current X Count Register */
+#define MDMA_D0_CURR_Y_COUNT	0xFFC00E38	/* MemDMA Stream 0 Destination Current Y Count Register */
+#define MDMA_D0_IRQ_STATUS	0xFFC00E28	/* MemDMA Stream 0 Destination Interrupt/Status Register */
+#define MDMA_D0_PERIPHERAL_MAP	0xFFC00E2C	/* MemDMA Stream 0 Destination Peripheral Map Register */
+
+#define MDMA_S0_CONFIG		0xFFC00E48	/* MemDMA Stream 0 Source Configuration Register */
+#define MDMA_S0_NEXT_DESC_PTR	0xFFC00E40	/* MemDMA Stream 0 Source Next Descriptor Pointer Register */
+#define MDMA_S0_START_ADDR	0xFFC00E44	/* MemDMA Stream 0 Source Start Address Register */
+#define MDMA_S0_X_COUNT		0xFFC00E50	/* MemDMA Stream 0 Source X Count Register */
+#define MDMA_S0_Y_COUNT		0xFFC00E58	/* MemDMA Stream 0 Source Y Count Register */
+#define MDMA_S0_X_MODIFY	0xFFC00E54	/* MemDMA Stream 0 Source X Modify Register */
+#define MDMA_S0_Y_MODIFY	0xFFC00E5C	/* MemDMA Stream 0 Source Y Modify Register */
+#define MDMA_S0_CURR_DESC_PTR	0xFFC00E60	/* MemDMA Stream 0 Source Current Descriptor Pointer Register */
+#define MDMA_S0_CURR_ADDR	0xFFC00E64	/* MemDMA Stream 0 Source Current Address Register */
+#define MDMA_S0_CURR_X_COUNT	0xFFC00E70	/* MemDMA Stream 0 Source Current X Count Register */
+#define MDMA_S0_CURR_Y_COUNT	0xFFC00E78	/* MemDMA Stream 0 Source Current Y Count Register */
+#define MDMA_S0_IRQ_STATUS	0xFFC00E68	/* MemDMA Stream 0 Source Interrupt/Status Register */
+#define MDMA_S0_PERIPHERAL_MAP	0xFFC00E6C	/* MemDMA Stream 0 Source Peripheral Map Register */
+
+/* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */
+
+#define PPI_CONTROL			0xFFC01000	/* PPI Control Register */
+#define PPI_STATUS			0xFFC01004	/* PPI Status Register */
+#define PPI_COUNT			0xFFC01008	/* PPI Transfer Count Register */
+#define PPI_DELAY			0xFFC0100C	/* PPI Delay Count Register */
+#define PPI_FRAME			0xFFC01010	/* PPI Frame Length Register */
+
+/*********************************************************************************** */
+/* System MMR Register Bits */
+/******************************************************************************* */
+
+/* CHIPID Masks */
+#define CHIPID_VERSION         0xF0000000
+#define CHIPID_FAMILY          0x0FFFF000
+#define CHIPID_MANUFACTURE     0x00000FFE
+
+/* SWRST Mask */
+#define SYSTEM_RESET	0x0007	/* Initiates A System Software Reset			*/
+#define	DOUBLE_FAULT	0x0008	/* Core Double Fault Causes Reset				*/
+#define RESET_DOUBLE	0x2000	/* SW Reset Generated By Core Double-Fault		*/
+#define RESET_WDOG	0x4000	/* SW Reset Generated By Watchdog Timer			*/
+#define RESET_SOFTWARE	0x8000	/* SW Reset Occurred Since Last Read Of SWRST	*/
+
+/* SYSCR Masks																				*/
+#define BMODE			0x0006	/* Boot Mode - Latched During HW Reset From Mode Pins	*/
+#define	NOBOOT			0x0010	/* Execute From L1 or ASYNC Bank 0 When BMODE = 0		*/
+
+/* *************  SYSTEM INTERRUPT CONTROLLER MASKS ***************** */
+
+    /* SIC_IAR0 Masks */
+
+#define P0_IVG(x)    ((x)-7)	/* Peripheral #0 assigned IVG #x  */
+#define P1_IVG(x)    ((x)-7) << 0x4	/* Peripheral #1 assigned IVG #x  */
+#define P2_IVG(x)    ((x)-7) << 0x8	/* Peripheral #2 assigned IVG #x  */
+#define P3_IVG(x)    ((x)-7) << 0xC	/* Peripheral #3 assigned IVG #x  */
+#define P4_IVG(x)    ((x)-7) << 0x10	/* Peripheral #4 assigned IVG #x  */
+#define P5_IVG(x)    ((x)-7) << 0x14	/* Peripheral #5 assigned IVG #x  */
+#define P6_IVG(x)    ((x)-7) << 0x18	/* Peripheral #6 assigned IVG #x  */
+#define P7_IVG(x)    ((x)-7) << 0x1C	/* Peripheral #7 assigned IVG #x  */
+
+/* SIC_IAR1 Masks */
+
+#define P8_IVG(x)     ((x)-7)	/* Peripheral #8 assigned IVG #x  */
+#define P9_IVG(x)     ((x)-7) << 0x4	/* Peripheral #9 assigned IVG #x  */
+#define P10_IVG(x)    ((x)-7) << 0x8	/* Peripheral #10 assigned IVG #x  */
+#define P11_IVG(x)    ((x)-7) << 0xC	/* Peripheral #11 assigned IVG #x  */
+#define P12_IVG(x)    ((x)-7) << 0x10	/* Peripheral #12 assigned IVG #x  */
+#define P13_IVG(x)    ((x)-7) << 0x14	/* Peripheral #13 assigned IVG #x  */
+#define P14_IVG(x)    ((x)-7) << 0x18	/* Peripheral #14 assigned IVG #x  */
+#define P15_IVG(x)    ((x)-7) << 0x1C	/* Peripheral #15 assigned IVG #x  */
+
+/* SIC_IAR2 Masks */
+#define P16_IVG(x)    ((x)-7)	/* Peripheral #16 assigned IVG #x  */
+#define P17_IVG(x)    ((x)-7) << 0x4	/* Peripheral #17 assigned IVG #x  */
+#define P18_IVG(x)    ((x)-7) << 0x8	/* Peripheral #18 assigned IVG #x  */
+#define P19_IVG(x)    ((x)-7) << 0xC	/* Peripheral #19 assigned IVG #x  */
+#define P20_IVG(x)    ((x)-7) << 0x10	/* Peripheral #20 assigned IVG #x  */
+#define P21_IVG(x)    ((x)-7) << 0x14	/* Peripheral #21 assigned IVG #x  */
+#define P22_IVG(x)    ((x)-7) << 0x18	/* Peripheral #22 assigned IVG #x  */
+#define P23_IVG(x)    ((x)-7) << 0x1C	/* Peripheral #23 assigned IVG #x  */
+
+/* SIC_IMASK Masks */
+#define SIC_UNMASK_ALL         0x00000000	/* Unmask all peripheral interrupts */
+#define SIC_MASK_ALL           0xFFFFFFFF	/* Mask all peripheral interrupts */
+#define SIC_MASK(x)	       (1 << (x))	/* Mask Peripheral #x interrupt */
+#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x)))	/* Unmask Peripheral #x interrupt */
+
+/* SIC_IWR Masks */
+#define IWR_DISABLE_ALL        0x00000000	/* Wakeup Disable all peripherals */
+#define IWR_ENABLE_ALL         0xFFFFFFFF	/* Wakeup Enable all peripherals */
+#define IWR_ENABLE(x)	       (1 << (x))	/* Wakeup Enable Peripheral #x */
+#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x)))	/* Wakeup Disable Peripheral #x */
+
+/*  *********  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS ****************   */
+
+/*  PPI_CONTROL Masks         */
+#define PORT_EN              0x00000001	/* PPI Port Enable  */
+#define PORT_DIR             0x00000002	/* PPI Port Direction       */
+#define XFR_TYPE             0x0000000C	/* PPI Transfer Type  */
+#define PORT_CFG             0x00000030	/* PPI Port Configuration */
+#define FLD_SEL              0x00000040	/* PPI Active Field Select */
+#define PACK_EN              0x00000080	/* PPI Packing Mode */
+#define DMA32                0x00000100	/* PPI 32-bit DMA Enable */
+#define SKIP_EN              0x00000200	/* PPI Skip Element Enable */
+#define SKIP_EO              0x00000400	/* PPI Skip Even/Odd Elements */
+#define DLENGTH              0x00003800	/* PPI Data Length  */
+#define DLEN_8			0x0000	/* Data Length = 8 Bits                         */
+#define DLEN_10			0x0800	/* Data Length = 10 Bits                        */
+#define DLEN_11			0x1000	/* Data Length = 11 Bits                        */
+#define DLEN_12			0x1800	/* Data Length = 12 Bits                        */
+#define DLEN_13			0x2000	/* Data Length = 13 Bits                        */
+#define DLEN_14			0x2800	/* Data Length = 14 Bits                        */
+#define DLEN_15			0x3000	/* Data Length = 15 Bits                        */
+#define DLEN_16			0x3800	/* Data Length = 16 Bits                        */
+#define DLEN(x)	(((x-9) & 0x07) << 11)	/* PPI Data Length (only works for x=10-->x=16) */
+#define POL                  0x0000C000	/* PPI Signal Polarities       */
+#define POLC		0x4000		/* PPI Clock Polarity				*/
+#define POLS		0x8000		/* PPI Frame Sync Polarity			*/
+
+/* PPI_STATUS Masks                                          */
+#define FLD	             0x00000400	/* Field Indicator   */
+#define FT_ERR	             0x00000800	/* Frame Track Error */
+#define OVR	             0x00001000	/* FIFO Overflow Error */
+#define UNDR	             0x00002000	/* FIFO Underrun Error */
+#define ERR_DET	      	     0x00004000	/* Error Detected Indicator */
+#define ERR_NCOR	     0x00008000	/* Error Not Corrected Indicator */
+
+/* **********  DMA CONTROLLER MASKS  *********************8 */
+
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
+
+#define CTYPE	            0x00000040	/* DMA Channel Type Indicator */
+#define CTYPE_P             6	/* DMA Channel Type Indicator BIT POSITION */
+#define PCAP8	            0x00000080	/* DMA 8-bit Operation Indicator   */
+#define PCAP16	            0x00000100	/* DMA 16-bit Operation Indicator */
+#define PCAP32	            0x00000200	/* DMA 32-bit Operation Indicator */
+#define PCAPWR	            0x00000400	/* DMA Write Operation Indicator */
+#define PCAPRD	            0x00000800	/* DMA Read Operation Indicator */
+#define PMAP	            0x00007000	/* DMA Peripheral Map Field */
+
+#define PMAP_PPI		0x0000	/* PMAP PPI Port DMA */
+#define	PMAP_SPORT0RX		0x1000	/* PMAP SPORT0 Receive DMA */
+#define PMAP_SPORT0TX		0x2000	/* PMAP SPORT0 Transmit DMA */
+#define	PMAP_SPORT1RX		0x3000	/* PMAP SPORT1 Receive DMA */
+#define PMAP_SPORT1TX		0x4000	/* PMAP SPORT1 Transmit DMA */
+#define PMAP_SPI		0x5000	/* PMAP SPI DMA */
+#define PMAP_UARTRX		0x6000	/* PMAP UART Receive DMA */
+#define PMAP_UARTTX		0x7000	/* PMAP UART Transmit DMA */
+
+/*  *************  GENERAL PURPOSE TIMER MASKS  ******************** */
+
+/* PWM Timer bit definitions */
+
+/* TIMER_ENABLE Register */
+#define TIMEN0	0x0001
+#define TIMEN1	0x0002
+#define TIMEN2	0x0004
+
+#define TIMEN0_P	0x00
+#define TIMEN1_P	0x01
+#define TIMEN2_P	0x02
+
+/* TIMER_DISABLE Register */
+#define TIMDIS0	0x0001
+#define TIMDIS1	0x0002
+#define TIMDIS2	0x0004
+
+#define TIMDIS0_P	0x00
+#define TIMDIS1_P	0x01
+#define TIMDIS2_P	0x02
+
+/* TIMER_STATUS Register */
+#define TIMIL0		0x0001
+#define TIMIL1		0x0002
+#define TIMIL2		0x0004
+#define TOVF_ERR0		0x0010	/* Timer 0 Counter Overflow		*/
+#define TOVF_ERR1		0x0020	/* Timer 1 Counter Overflow		*/
+#define TOVF_ERR2		0x0040	/* Timer 2 Counter Overflow		*/
+#define TRUN0		0x1000
+#define TRUN1		0x2000
+#define TRUN2		0x4000
+
+#define TIMIL0_P	0x00
+#define TIMIL1_P	0x01
+#define TIMIL2_P	0x02
+#define TOVF_ERR0_P		0x04
+#define TOVF_ERR1_P		0x05
+#define TOVF_ERR2_P		0x06
+#define TRUN0_P		0x0C
+#define TRUN1_P		0x0D
+#define TRUN2_P		0x0E
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define TOVL_ERR0 		TOVF_ERR0
+#define TOVL_ERR1 		TOVF_ERR1
+#define TOVL_ERR2 		TOVF_ERR2
+#define TOVL_ERR0_P		TOVF_ERR0_P
+#define TOVL_ERR1_P 		TOVF_ERR1_P
+#define TOVL_ERR2_P 		TOVF_ERR2_P
+
+/* TIMERx_CONFIG Registers */
+#define PWM_OUT		0x0001
+#define WDTH_CAP	0x0002
+#define EXT_CLK		0x0003
+#define PULSE_HI	0x0004
+#define PERIOD_CNT	0x0008
+#define IRQ_ENA		0x0010
+#define TIN_SEL		0x0020
+#define OUT_DIS		0x0040
+#define CLK_SEL		0x0080
+#define TOGGLE_HI	0x0100
+#define EMU_RUN		0x0200
+#define ERR_TYP(x)	((x & 0x03) << 14)
+
+#define TMODE_P0		0x00
+#define TMODE_P1		0x01
+#define PULSE_HI_P		0x02
+#define PERIOD_CNT_P		0x03
+#define IRQ_ENA_P		0x04
+#define TIN_SEL_P		0x05
+#define OUT_DIS_P		0x06
+#define CLK_SEL_P		0x07
+#define TOGGLE_HI_P		0x08
+#define EMU_RUN_P		0x09
+#define ERR_TYP_P0		0x0E
+#define ERR_TYP_P1		0x0F
+
+/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  ************* */
+
+/* AMGCTL Masks */
+#define AMCKEN			0x00000001	/* Enable CLKOUT */
+#define	AMBEN_NONE		0x00000000	/* All Banks Disabled								*/
+#define AMBEN_B0		0x00000002	/* Enable Asynchronous Memory Bank 0 only */
+#define AMBEN_B0_B1		0x00000004	/* Enable Asynchronous Memory Banks 0 & 1 only */
+#define AMBEN_B0_B1_B2		0x00000006	/* Enable Asynchronous Memory Banks 0, 1, and 2 */
+#define AMBEN_ALL		0x00000008	/* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */
+
+/* AMGCTL Bit Positions */
+#define AMCKEN_P		0x00000000	/* Enable CLKOUT */
+#define AMBEN_P0		0x00000001	/* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
+#define AMBEN_P1		0x00000002	/* Asynchronous Memory Enable, 010 - banks 0&1 enabled,  011 - banks 0-3 enabled */
+#define AMBEN_P2		0x00000003	/* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */
+
+/* AMBCTL0 Masks */
+#define B0RDYEN	0x00000001	/* Bank 0 RDY Enable, 0=disable, 1=enable */
+#define B0RDYPOL 0x00000002	/* Bank 0 RDY Active high, 0=active low, 1=active high */
+#define B0TT_1	0x00000004	/* Bank 0 Transition Time from Read to Write = 1 cycle */
+#define B0TT_2	0x00000008	/* Bank 0 Transition Time from Read to Write = 2 cycles */
+#define B0TT_3	0x0000000C	/* Bank 0 Transition Time from Read to Write = 3 cycles */
+#define B0TT_4	0x00000000	/* Bank 0 Transition Time from Read to Write = 4 cycles */
+#define B0ST_1	0x00000010	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
+#define B0ST_2	0x00000020	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
+#define B0ST_3	0x00000030	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
+#define B0ST_4	0x00000000	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
+#define B0HT_1	0x00000040	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */
+#define B0HT_2	0x00000080	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */
+#define B0HT_3	0x000000C0	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */
+#define B0HT_0	0x00000000	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */
+#define B0RAT_1			0x00000100	/* Bank 0 Read Access Time = 1 cycle */
+#define B0RAT_2			0x00000200	/* Bank 0 Read Access Time = 2 cycles */
+#define B0RAT_3			0x00000300	/* Bank 0 Read Access Time = 3 cycles */
+#define B0RAT_4			0x00000400	/* Bank 0 Read Access Time = 4 cycles */
+#define B0RAT_5			0x00000500	/* Bank 0 Read Access Time = 5 cycles */
+#define B0RAT_6			0x00000600	/* Bank 0 Read Access Time = 6 cycles */
+#define B0RAT_7			0x00000700	/* Bank 0 Read Access Time = 7 cycles */
+#define B0RAT_8			0x00000800	/* Bank 0 Read Access Time = 8 cycles */
+#define B0RAT_9			0x00000900	/* Bank 0 Read Access Time = 9 cycles */
+#define B0RAT_10		0x00000A00	/* Bank 0 Read Access Time = 10 cycles */
+#define B0RAT_11		0x00000B00	/* Bank 0 Read Access Time = 11 cycles */
+#define B0RAT_12		0x00000C00	/* Bank 0 Read Access Time = 12 cycles */
+#define B0RAT_13		0x00000D00	/* Bank 0 Read Access Time = 13 cycles */
+#define B0RAT_14		0x00000E00	/* Bank 0 Read Access Time = 14 cycles */
+#define B0RAT_15		0x00000F00	/* Bank 0 Read Access Time = 15 cycles */
+#define B0WAT_1			0x00001000	/* Bank 0 Write Access Time = 1 cycle */
+#define B0WAT_2			0x00002000	/* Bank 0 Write Access Time = 2 cycles */
+#define B0WAT_3			0x00003000	/* Bank 0 Write Access Time = 3 cycles */
+#define B0WAT_4			0x00004000	/* Bank 0 Write Access Time = 4 cycles */
+#define B0WAT_5			0x00005000	/* Bank 0 Write Access Time = 5 cycles */
+#define B0WAT_6			0x00006000	/* Bank 0 Write Access Time = 6 cycles */
+#define B0WAT_7			0x00007000	/* Bank 0 Write Access Time = 7 cycles */
+#define B0WAT_8			0x00008000	/* Bank 0 Write Access Time = 8 cycles */
+#define B0WAT_9			0x00009000	/* Bank 0 Write Access Time = 9 cycles */
+#define B0WAT_10		0x0000A000	/* Bank 0 Write Access Time = 10 cycles */
+#define B0WAT_11		0x0000B000	/* Bank 0 Write Access Time = 11 cycles */
+#define B0WAT_12		0x0000C000	/* Bank 0 Write Access Time = 12 cycles */
+#define B0WAT_13		0x0000D000	/* Bank 0 Write Access Time = 13 cycles */
+#define B0WAT_14		0x0000E000	/* Bank 0 Write Access Time = 14 cycles */
+#define B0WAT_15		0x0000F000	/* Bank 0 Write Access Time = 15 cycles */
+#define B1RDYEN			0x00010000	/* Bank 1 RDY enable, 0=disable, 1=enable */
+#define B1RDYPOL		0x00020000	/* Bank 1 RDY Active high, 0=active low, 1=active high */
+#define B1TT_1			0x00040000	/* Bank 1 Transition Time from Read to Write = 1 cycle */
+#define B1TT_2			0x00080000	/* Bank 1 Transition Time from Read to Write = 2 cycles */
+#define B1TT_3			0x000C0000	/* Bank 1 Transition Time from Read to Write = 3 cycles */
+#define B1TT_4			0x00000000	/* Bank 1 Transition Time from Read to Write = 4 cycles */
+#define B1ST_1			0x00100000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B1ST_2			0x00200000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B1ST_3			0x00300000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B1ST_4			0x00000000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B1HT_1			0x00400000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B1HT_2			0x00800000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B1HT_3			0x00C00000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B1HT_0			0x00000000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B1RAT_1			0x01000000	/* Bank 1 Read Access Time = 1 cycle */
+#define B1RAT_2			0x02000000	/* Bank 1 Read Access Time = 2 cycles */
+#define B1RAT_3			0x03000000	/* Bank 1 Read Access Time = 3 cycles */
+#define B1RAT_4			0x04000000	/* Bank 1 Read Access Time = 4 cycles */
+#define B1RAT_5			0x05000000	/* Bank 1 Read Access Time = 5 cycles */
+#define B1RAT_6			0x06000000	/* Bank 1 Read Access Time = 6 cycles */
+#define B1RAT_7			0x07000000	/* Bank 1 Read Access Time = 7 cycles */
+#define B1RAT_8			0x08000000	/* Bank 1 Read Access Time = 8 cycles */
+#define B1RAT_9			0x09000000	/* Bank 1 Read Access Time = 9 cycles */
+#define B1RAT_10		0x0A000000	/* Bank 1 Read Access Time = 10 cycles */
+#define B1RAT_11		0x0B000000	/* Bank 1 Read Access Time = 11 cycles */
+#define B1RAT_12		0x0C000000	/* Bank 1 Read Access Time = 12 cycles */
+#define B1RAT_13		0x0D000000	/* Bank 1 Read Access Time = 13 cycles */
+#define B1RAT_14		0x0E000000	/* Bank 1 Read Access Time = 14 cycles */
+#define B1RAT_15		0x0F000000	/* Bank 1 Read Access Time = 15 cycles */
+#define B1WAT_1			0x10000000	/* Bank 1 Write Access Time = 1 cycle */
+#define B1WAT_2			0x20000000	/* Bank 1 Write Access Time = 2 cycles */
+#define B1WAT_3			0x30000000	/* Bank 1 Write Access Time = 3 cycles */
+#define B1WAT_4			0x40000000	/* Bank 1 Write Access Time = 4 cycles */
+#define B1WAT_5			0x50000000	/* Bank 1 Write Access Time = 5 cycles */
+#define B1WAT_6			0x60000000	/* Bank 1 Write Access Time = 6 cycles */
+#define B1WAT_7			0x70000000	/* Bank 1 Write Access Time = 7 cycles */
+#define B1WAT_8			0x80000000	/* Bank 1 Write Access Time = 8 cycles */
+#define B1WAT_9			0x90000000	/* Bank 1 Write Access Time = 9 cycles */
+#define B1WAT_10		0xA0000000	/* Bank 1 Write Access Time = 10 cycles */
+#define B1WAT_11		0xB0000000	/* Bank 1 Write Access Time = 11 cycles */
+#define B1WAT_12		0xC0000000	/* Bank 1 Write Access Time = 12 cycles */
+#define B1WAT_13		0xD0000000	/* Bank 1 Write Access Time = 13 cycles */
+#define B1WAT_14		0xE0000000	/* Bank 1 Write Access Time = 14 cycles */
+#define B1WAT_15		0xF0000000	/* Bank 1 Write Access Time = 15 cycles */
+
+/* AMBCTL1 Masks */
+#define B2RDYEN			0x00000001	/* Bank 2 RDY Enable, 0=disable, 1=enable */
+#define B2RDYPOL		0x00000002	/* Bank 2 RDY Active high, 0=active low, 1=active high */
+#define B2TT_1			0x00000004	/* Bank 2 Transition Time from Read to Write = 1 cycle */
+#define B2TT_2			0x00000008	/* Bank 2 Transition Time from Read to Write = 2 cycles */
+#define B2TT_3			0x0000000C	/* Bank 2 Transition Time from Read to Write = 3 cycles */
+#define B2TT_4			0x00000000	/* Bank 2 Transition Time from Read to Write = 4 cycles */
+#define B2ST_1			0x00000010	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B2ST_2			0x00000020	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B2ST_3			0x00000030	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B2ST_4			0x00000000	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B2HT_1			0x00000040	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B2HT_2			0x00000080	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B2HT_3			0x000000C0	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B2HT_0			0x00000000	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B2RAT_1			0x00000100	/* Bank 2 Read Access Time = 1 cycle */
+#define B2RAT_2			0x00000200	/* Bank 2 Read Access Time = 2 cycles */
+#define B2RAT_3			0x00000300	/* Bank 2 Read Access Time = 3 cycles */
+#define B2RAT_4			0x00000400	/* Bank 2 Read Access Time = 4 cycles */
+#define B2RAT_5			0x00000500	/* Bank 2 Read Access Time = 5 cycles */
+#define B2RAT_6			0x00000600	/* Bank 2 Read Access Time = 6 cycles */
+#define B2RAT_7			0x00000700	/* Bank 2 Read Access Time = 7 cycles */
+#define B2RAT_8			0x00000800	/* Bank 2 Read Access Time = 8 cycles */
+#define B2RAT_9			0x00000900	/* Bank 2 Read Access Time = 9 cycles */
+#define B2RAT_10		0x00000A00	/* Bank 2 Read Access Time = 10 cycles */
+#define B2RAT_11		0x00000B00	/* Bank 2 Read Access Time = 11 cycles */
+#define B2RAT_12		0x00000C00	/* Bank 2 Read Access Time = 12 cycles */
+#define B2RAT_13		0x00000D00	/* Bank 2 Read Access Time = 13 cycles */
+#define B2RAT_14		0x00000E00	/* Bank 2 Read Access Time = 14 cycles */
+#define B2RAT_15		0x00000F00	/* Bank 2 Read Access Time = 15 cycles */
+#define B2WAT_1			0x00001000	/* Bank 2 Write Access Time = 1 cycle */
+#define B2WAT_2			0x00002000	/* Bank 2 Write Access Time = 2 cycles */
+#define B2WAT_3			0x00003000	/* Bank 2 Write Access Time = 3 cycles */
+#define B2WAT_4			0x00004000	/* Bank 2 Write Access Time = 4 cycles */
+#define B2WAT_5			0x00005000	/* Bank 2 Write Access Time = 5 cycles */
+#define B2WAT_6			0x00006000	/* Bank 2 Write Access Time = 6 cycles */
+#define B2WAT_7			0x00007000	/* Bank 2 Write Access Time = 7 cycles */
+#define B2WAT_8			0x00008000	/* Bank 2 Write Access Time = 8 cycles */
+#define B2WAT_9			0x00009000	/* Bank 2 Write Access Time = 9 cycles */
+#define B2WAT_10		0x0000A000	/* Bank 2 Write Access Time = 10 cycles */
+#define B2WAT_11		0x0000B000	/* Bank 2 Write Access Time = 11 cycles */
+#define B2WAT_12		0x0000C000	/* Bank 2 Write Access Time = 12 cycles */
+#define B2WAT_13		0x0000D000	/* Bank 2 Write Access Time = 13 cycles */
+#define B2WAT_14		0x0000E000	/* Bank 2 Write Access Time = 14 cycles */
+#define B2WAT_15		0x0000F000	/* Bank 2 Write Access Time = 15 cycles */
+#define B3RDYEN			0x00010000	/* Bank 3 RDY enable, 0=disable, 1=enable */
+#define B3RDYPOL		0x00020000	/* Bank 3 RDY Active high, 0=active low, 1=active high */
+#define B3TT_1			0x00040000	/* Bank 3 Transition Time from Read to Write = 1 cycle */
+#define B3TT_2			0x00080000	/* Bank 3 Transition Time from Read to Write = 2 cycles */
+#define B3TT_3			0x000C0000	/* Bank 3 Transition Time from Read to Write = 3 cycles */
+#define B3TT_4			0x00000000	/* Bank 3 Transition Time from Read to Write = 4 cycles */
+#define B3ST_1			0x00100000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B3ST_2			0x00200000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B3ST_3			0x00300000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B3ST_4			0x00000000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B3HT_1			0x00400000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B3HT_2			0x00800000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B3HT_3			0x00C00000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B3HT_0			0x00000000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B3RAT_1			0x01000000	/* Bank 3 Read Access Time = 1 cycle */
+#define B3RAT_2			0x02000000	/* Bank 3 Read Access Time = 2 cycles */
+#define B3RAT_3			0x03000000	/* Bank 3 Read Access Time = 3 cycles */
+#define B3RAT_4			0x04000000	/* Bank 3 Read Access Time = 4 cycles */
+#define B3RAT_5			0x05000000	/* Bank 3 Read Access Time = 5 cycles */
+#define B3RAT_6			0x06000000	/* Bank 3 Read Access Time = 6 cycles */
+#define B3RAT_7			0x07000000	/* Bank 3 Read Access Time = 7 cycles */
+#define B3RAT_8			0x08000000	/* Bank 3 Read Access Time = 8 cycles */
+#define B3RAT_9			0x09000000	/* Bank 3 Read Access Time = 9 cycles */
+#define B3RAT_10		0x0A000000	/* Bank 3 Read Access Time = 10 cycles */
+#define B3RAT_11		0x0B000000	/* Bank 3 Read Access Time = 11 cycles */
+#define B3RAT_12		0x0C000000	/* Bank 3 Read Access Time = 12 cycles */
+#define B3RAT_13		0x0D000000	/* Bank 3 Read Access Time = 13 cycles */
+#define B3RAT_14		0x0E000000	/* Bank 3 Read Access Time = 14 cycles */
+#define B3RAT_15		0x0F000000	/* Bank 3 Read Access Time = 15 cycles */
+#define B3WAT_1			0x10000000	/* Bank 3 Write Access Time = 1 cycle */
+#define B3WAT_2			0x20000000	/* Bank 3 Write Access Time = 2 cycles */
+#define B3WAT_3			0x30000000	/* Bank 3 Write Access Time = 3 cycles */
+#define B3WAT_4			0x40000000	/* Bank 3 Write Access Time = 4 cycles */
+#define B3WAT_5			0x50000000	/* Bank 3 Write Access Time = 5 cycles */
+#define B3WAT_6			0x60000000	/* Bank 3 Write Access Time = 6 cycles */
+#define B3WAT_7			0x70000000	/* Bank 3 Write Access Time = 7 cycles */
+#define B3WAT_8			0x80000000	/* Bank 3 Write Access Time = 8 cycles */
+#define B3WAT_9			0x90000000	/* Bank 3 Write Access Time = 9 cycles */
+#define B3WAT_10		0xA0000000	/* Bank 3 Write Access Time = 10 cycles */
+#define B3WAT_11		0xB0000000	/* Bank 3 Write Access Time = 11 cycles */
+#define B3WAT_12		0xC0000000	/* Bank 3 Write Access Time = 12 cycles */
+#define B3WAT_13		0xD0000000	/* Bank 3 Write Access Time = 13 cycles */
+#define B3WAT_14		0xE0000000	/* Bank 3 Write Access Time = 14 cycles */
+#define B3WAT_15		0xF0000000	/* Bank 3 Write Access Time = 15 cycles */
+
+/* **********************  SDRAM CONTROLLER MASKS  *************************** */
+
+/* SDGCTL Masks */
+#define SCTLE			0x00000001	/* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */
+#define CL_2			0x00000008	/* SDRAM CAS latency = 2 cycles */
+#define CL_3			0x0000000C	/* SDRAM CAS latency = 3 cycles */
+#define PFE			0x00000010	/* Enable SDRAM prefetch */
+#define PFP			0x00000020	/* Prefetch has priority over AMC requests */
+#define PASR_ALL		0x00000000	/* All 4 SDRAM Banks Refreshed In Self-Refresh				*/
+#define PASR_B0_B1		0x00000010	/* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh		*/
+#define PASR_B0			0x00000020	/* Only SDRAM Bank 0 Is Refreshed In Self-Refresh			*/
+#define TRAS_1			0x00000040	/* SDRAM tRAS = 1 cycle */
+#define TRAS_2			0x00000080	/* SDRAM tRAS = 2 cycles */
+#define TRAS_3			0x000000C0	/* SDRAM tRAS = 3 cycles */
+#define TRAS_4			0x00000100	/* SDRAM tRAS = 4 cycles */
+#define TRAS_5			0x00000140	/* SDRAM tRAS = 5 cycles */
+#define TRAS_6			0x00000180	/* SDRAM tRAS = 6 cycles */
+#define TRAS_7			0x000001C0	/* SDRAM tRAS = 7 cycles */
+#define TRAS_8			0x00000200	/* SDRAM tRAS = 8 cycles */
+#define TRAS_9			0x00000240	/* SDRAM tRAS = 9 cycles */
+#define TRAS_10			0x00000280	/* SDRAM tRAS = 10 cycles */
+#define TRAS_11			0x000002C0	/* SDRAM tRAS = 11 cycles */
+#define TRAS_12			0x00000300	/* SDRAM tRAS = 12 cycles */
+#define TRAS_13			0x00000340	/* SDRAM tRAS = 13 cycles */
+#define TRAS_14			0x00000380	/* SDRAM tRAS = 14 cycles */
+#define TRAS_15			0x000003C0	/* SDRAM tRAS = 15 cycles */
+#define TRP_1			0x00000800	/* SDRAM tRP = 1 cycle */
+#define TRP_2			0x00001000	/* SDRAM tRP = 2 cycles */
+#define TRP_3			0x00001800	/* SDRAM tRP = 3 cycles */
+#define TRP_4			0x00002000	/* SDRAM tRP = 4 cycles */
+#define TRP_5			0x00002800	/* SDRAM tRP = 5 cycles */
+#define TRP_6			0x00003000	/* SDRAM tRP = 6 cycles */
+#define TRP_7			0x00003800	/* SDRAM tRP = 7 cycles */
+#define TRCD_1			0x00008000	/* SDRAM tRCD = 1 cycle */
+#define TRCD_2			0x00010000	/* SDRAM tRCD = 2 cycles */
+#define TRCD_3			0x00018000	/* SDRAM tRCD = 3 cycles */
+#define TRCD_4			0x00020000	/* SDRAM tRCD = 4 cycles */
+#define TRCD_5			0x00028000	/* SDRAM tRCD = 5 cycles */
+#define TRCD_6			0x00030000	/* SDRAM tRCD = 6 cycles */
+#define TRCD_7			0x00038000	/* SDRAM tRCD = 7 cycles */
+#define TWR_1			0x00080000	/* SDRAM tWR = 1 cycle */
+#define TWR_2			0x00100000	/* SDRAM tWR = 2 cycles */
+#define TWR_3			0x00180000	/* SDRAM tWR = 3 cycles */
+#define PUPSD			0x00200000	/*Power-up start delay */
+#define PSM			0x00400000	/* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */
+#define PSS				0x00800000	/* enable SDRAM power-up sequence on next SDRAM access */
+#define SRFS			0x01000000	/* Start SDRAM self-refresh mode */
+#define EBUFE			0x02000000	/* Enable external buffering timing */
+#define FBBRW			0x04000000	/* Fast back-to-back read write enable */
+#define EMREN			0x10000000	/* Extended mode register enable */
+#define TCSR			0x20000000	/* Temp compensated self refresh value 85 deg C */
+#define CDDBG			0x40000000	/* Tristate SDRAM controls during bus grant */
+
+/* EBIU_SDBCTL Masks */
+#define EBE			0x00000001	/* Enable SDRAM external bank */
+#define EBSZ_16			0x00000000	/* SDRAM external bank size = 16MB */
+#define EBSZ_32			0x00000002	/* SDRAM external bank size = 32MB */
+#define EBSZ_64			0x00000004	/* SDRAM external bank size = 64MB */
+#define EBSZ_128			0x00000006	/* SDRAM external bank size = 128MB */
+#define EBCAW_8			0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EBCAW_9			0x00000010	/* SDRAM external bank column address width = 9 bits */
+#define EBCAW_10			0x00000020	/* SDRAM external bank column address width = 9 bits */
+#define EBCAW_11			0x00000030	/* SDRAM external bank column address width = 9 bits */
+
+/* EBIU_SDSTAT Masks */
+#define SDCI			0x00000001	/* SDRAM controller is idle  */
+#define SDSRA			0x00000002	/* SDRAM SDRAM self refresh is active */
+#define SDPUA			0x00000004	/* SDRAM power up active  */
+#define SDRS			0x00000008	/* SDRAM is in reset state */
+#define SDEASE		      0x00000010	/* SDRAM EAB sticky error status - W1C */
+#define BGSTAT			0x00000020	/* Bus granted */
+
+
+#endif				/* _DEF_BF532_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/dma.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/dma.h
new file mode 100644
index 0000000..fb34934
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/dma.h
@@ -0,0 +1,26 @@
+/* mach/dma.h - arch-specific DMA defines
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define MAX_DMA_CHANNELS 12
+
+#define CH_PPI          0
+#define CH_SPORT0_RX    1
+#define CH_SPORT0_TX    2
+#define CH_SPORT1_RX    3
+#define CH_SPORT1_TX    4
+#define CH_SPI          5
+#define CH_UART0_RX     6
+#define CH_UART0_TX     7
+#define CH_MEM_STREAM0_DEST     8	 /* TX */
+#define CH_MEM_STREAM0_SRC      9	 /* RX */
+#define CH_MEM_STREAM1_DEST     10	 /* TX */
+#define CH_MEM_STREAM1_SRC      11	 /* RX */
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/gpio.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/gpio.h
new file mode 100644
index 0000000..cce4f8f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/gpio.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define MAX_BLACKFIN_GPIOS 16
+
+#define GPIO_PF0	0
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+
+#define PORT_F GPIO_PF0
+
+#include <mach-common/ports-f.h>
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/irq.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/irq.h
new file mode 100644
index 0000000..7097337
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/irq.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _BF533_IRQ_H_
+#define _BF533_IRQ_H_
+
+#include <mach-common/irq.h>
+
+#define NR_PERI_INTS		24
+
+#define IRQ_PLL_WAKEUP		BFIN_IRQ(0)	/* PLL Wakeup Interrupt */
+#define IRQ_DMA_ERROR		BFIN_IRQ(1)	/* DMA Error (general) */
+#define IRQ_PPI_ERROR		BFIN_IRQ(2)	/* PPI Error Interrupt */
+#define IRQ_SPORT0_ERROR	BFIN_IRQ(3)	/* SPORT0 Error Interrupt */
+#define IRQ_SPORT1_ERROR	BFIN_IRQ(4)	/* SPORT1 Error Interrupt */
+#define IRQ_SPI_ERROR		BFIN_IRQ(5)	/* SPI Error Interrupt */
+#define IRQ_UART0_ERROR		BFIN_IRQ(6)	/* UART Error Interrupt */
+#define IRQ_RTC			BFIN_IRQ(7)	/* RTC Interrupt */
+#define IRQ_PPI			BFIN_IRQ(8)	/* DMA0 Interrupt (PPI) */
+#define IRQ_SPORT0_RX		BFIN_IRQ(9)	/* DMA1 Interrupt (SPORT0 RX) */
+#define IRQ_SPORT0_TX		BFIN_IRQ(10)	/* DMA2 Interrupt (SPORT0 TX) */
+#define IRQ_SPORT1_RX		BFIN_IRQ(11)	/* DMA3 Interrupt (SPORT1 RX) */
+#define IRQ_SPORT1_TX		BFIN_IRQ(12)	/* DMA4 Interrupt (SPORT1 TX) */
+#define IRQ_SPI			BFIN_IRQ(13)	/* DMA5 Interrupt (SPI) */
+#define IRQ_UART0_RX		BFIN_IRQ(14)	/* DMA6 Interrupt (UART RX) */
+#define IRQ_UART0_TX		BFIN_IRQ(15)	/* DMA7 Interrupt (UART TX) */
+#define IRQ_TIMER0		BFIN_IRQ(16)	/* Timer 0 */
+#define IRQ_TIMER1		BFIN_IRQ(17)	/* Timer 1 */
+#define IRQ_TIMER2		BFIN_IRQ(18)	/* Timer 2 */
+#define IRQ_PROG_INTA		BFIN_IRQ(19)	/* Programmable Flags A (8) */
+#define IRQ_PROG_INTB		BFIN_IRQ(20)	/* Programmable Flags B (8) */
+#define IRQ_MEM_DMA0		BFIN_IRQ(21)	/* DMA8/9 Interrupt (Memory DMA Stream 0) */
+#define IRQ_MEM_DMA1		BFIN_IRQ(22)	/* DMA10/11 Interrupt (Memory DMA Stream 1) */
+#define IRQ_WATCH		BFIN_IRQ(23)	/* Watch Dog Timer */
+
+#define SYS_IRQS		31
+
+#define IRQ_PF0			33
+#define IRQ_PF1			34
+#define IRQ_PF2			35
+#define IRQ_PF3			36
+#define IRQ_PF4			37
+#define IRQ_PF5			38
+#define IRQ_PF6			39
+#define IRQ_PF7			40
+#define IRQ_PF8			41
+#define IRQ_PF9			42
+#define IRQ_PF10		43
+#define IRQ_PF11		44
+#define IRQ_PF12		45
+#define IRQ_PF13		46
+#define IRQ_PF14		47
+#define IRQ_PF15		48
+
+#define GPIO_IRQ_BASE		IRQ_PF0
+
+#define NR_MACH_IRQS		(IRQ_PF15 + 1)
+
+/* IAR0 BIT FIELDS */
+#define RTC_ERROR_POS		28
+#define UART_ERROR_POS		24
+#define SPORT1_ERROR_POS	20
+#define SPI_ERROR_POS		16
+#define SPORT0_ERROR_POS	12
+#define PPI_ERROR_POS		8
+#define DMA_ERROR_POS		4
+#define PLLWAKE_ERROR_POS	0
+
+/* IAR1 BIT FIELDS */
+#define DMA7_UARTTX_POS		28
+#define DMA6_UARTRX_POS		24
+#define DMA5_SPI_POS		20
+#define DMA4_SPORT1TX_POS	16
+#define DMA3_SPORT1RX_POS	12
+#define DMA2_SPORT0TX_POS	8
+#define DMA1_SPORT0RX_POS	4
+#define DMA0_PPI_POS		0
+
+/* IAR2 BIT FIELDS */
+#define WDTIMER_POS		28
+#define MEMDMA1_POS		24
+#define MEMDMA0_POS		20
+#define PFB_POS			16
+#define PFA_POS			12
+#define TIMER2_POS		8
+#define TIMER1_POS		4
+#define TIMER0_POS		0
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/mem_map.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/mem_map.h
new file mode 100644
index 0000000..197af1a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/mem_map.h
@@ -0,0 +1,139 @@
+/*
+ * BF533 memory map
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
+
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0x20300000	 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK2_BASE	0x20200000	 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK1_BASE	0x20100000	 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK0_BASE	0x20000000	 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x00100000	/* 1M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x400
+
+/* Level 1 Memory */
+
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
+#else
+#define BFIN_ICACHESIZE	(0*1024)
+#endif
+
+/* Memory Map for ADSP-BF533 processors */
+
+#ifdef CONFIG_BF533
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#ifdef CONFIG_BFIN_ICACHE
+#define L1_CODE_LENGTH      (0x14000 - 0x4000)
+#else
+#define L1_CODE_LENGTH      0x14000
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+#endif
+
+/* Memory Map for ADSP-BF532 processors */
+
+#ifdef CONFIG_BF532
+#define L1_CODE_START       0xFFA08000
+#define L1_DATA_A_START     0xFF804000
+#define L1_DATA_B_START     0xFF904000
+
+#ifdef CONFIG_BFIN_ICACHE
+#define L1_CODE_LENGTH      (0xC000 - 0x4000)
+#else
+#define L1_CODE_LENGTH      0xC000
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x4000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x4000
+#define L1_DATA_B_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+#endif
+
+/* Memory Map for ADSP-BF531 processors */
+
+#ifdef CONFIG_BF531
+#define L1_CODE_START       0xFFA08000
+#define L1_DATA_A_START     0xFF804000
+#define L1_DATA_B_START     0xFF904000
+#define L1_CODE_LENGTH      0x4000
+#define L1_DATA_B_LENGTH      0x0000
+
+
+#ifdef CONFIG_BFIN_DCACHE
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB  | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB  | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif
+
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/pll.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/pll.h
new file mode 100644
index 0000000..94cca67
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/pll.h
@@ -0,0 +1 @@
+#include <mach-common/pll.h>
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/portmux.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/portmux.h
new file mode 100644
index 0000000..96f5d91
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/include/mach/portmux.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
+
+#define P_PPI0_CLK	(P_DONTCARE)
+#define P_PPI0_FS1	(P_DONTCARE)
+#define P_PPI0_FS2	(P_DONTCARE)
+#define P_PPI0_FS3	(P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PF8))
+#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PF9))
+#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PF10))
+#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PF11))
+#define P_PPI0_D0	(P_DONTCARE)
+#define P_PPI0_D1	(P_DONTCARE)
+#define P_PPI0_D2	(P_DONTCARE)
+#define P_PPI0_D3	(P_DONTCARE)
+#define P_PPI0_D4	(P_DEFINED | P_IDENT(GPIO_PF15))
+#define P_PPI0_D5	(P_DEFINED | P_IDENT(GPIO_PF14))
+#define P_PPI0_D6	(P_DEFINED | P_IDENT(GPIO_PF13))
+#define P_PPI0_D7	(P_DEFINED | P_IDENT(GPIO_PF12))
+
+#define P_SPORT1_TSCLK	(P_DONTCARE)
+#define P_SPORT1_RSCLK	(P_DONTCARE)
+#define P_SPORT0_TSCLK	(P_DONTCARE)
+#define P_SPORT0_RSCLK	(P_DONTCARE)
+#define P_UART0_RX	(P_DONTCARE)
+#define P_UART0_TX	(P_DONTCARE)
+#define P_SPORT1_DRSEC	(P_DONTCARE)
+#define P_SPORT1_RFS	(P_DONTCARE)
+#define P_SPORT1_DTPRI	(P_DONTCARE)
+#define P_SPORT1_DTSEC	(P_DONTCARE)
+#define P_SPORT1_TFS	(P_DONTCARE)
+#define P_SPORT1_DRPRI	(P_DONTCARE)
+#define P_SPORT0_DRSEC	(P_DONTCARE)
+#define P_SPORT0_RFS	(P_DONTCARE)
+#define P_SPORT0_DTPRI	(P_DONTCARE)
+#define P_SPORT0_DTSEC	(P_DONTCARE)
+#define P_SPORT0_TFS	(P_DONTCARE)
+#define P_SPORT0_DRPRI	(P_DONTCARE)
+
+#define P_SPI0_MOSI	(P_DONTCARE)
+#define P_SPI0_MISO	(P_DONTCARE)
+#define P_SPI0_SCK	(P_DONTCARE)
+#define P_SPI0_SSEL7	(P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_SPI0_SSEL6	(P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
+#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
+#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
+
+#define P_TMR2		(P_DONTCARE)
+#define P_TMR1		(P_DONTCARE)
+#define P_TMR0		(P_DONTCARE)
+#define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PF1))
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/ints-priority.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/ints-priority.c
new file mode 100644
index 0000000..8f714cf
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf533/ints-priority.c
@@ -0,0 +1,44 @@
+/*
+ * Set up the interrupt priorities
+ *
+ * Copyright 2005-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <asm/blackfin.h>
+
+void __init program_IAR(void)
+{
+	/* Program the IAR0 Register with the configured priority */
+	bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) |
+			    ((CONFIG_DMA_ERROR - 7) << DMA_ERROR_POS) |
+			    ((CONFIG_PPI_ERROR - 7) << PPI_ERROR_POS) |
+			    ((CONFIG_SPORT0_ERROR - 7) << SPORT0_ERROR_POS) |
+			    ((CONFIG_SPI_ERROR - 7) << SPI_ERROR_POS) |
+			    ((CONFIG_SPORT1_ERROR - 7) << SPORT1_ERROR_POS) |
+			    ((CONFIG_UART_ERROR - 7) << UART_ERROR_POS) |
+			    ((CONFIG_RTC_ERROR - 7) << RTC_ERROR_POS));
+
+	bfin_write_SIC_IAR1(((CONFIG_DMA0_PPI - 7) << DMA0_PPI_POS) |
+			    ((CONFIG_DMA1_SPORT0RX - 7) << DMA1_SPORT0RX_POS) |
+			    ((CONFIG_DMA2_SPORT0TX - 7) << DMA2_SPORT0TX_POS) |
+			    ((CONFIG_DMA3_SPORT1RX - 7) << DMA3_SPORT1RX_POS) |
+			    ((CONFIG_DMA4_SPORT1TX - 7) << DMA4_SPORT1TX_POS) |
+			    ((CONFIG_DMA5_SPI - 7) << DMA5_SPI_POS) |
+			    ((CONFIG_DMA6_UARTRX - 7) << DMA6_UARTRX_POS) |
+			    ((CONFIG_DMA7_UARTTX - 7) << DMA7_UARTTX_POS));
+
+	bfin_write_SIC_IAR2(((CONFIG_TIMER0 - 7) << TIMER0_POS) |
+			    ((CONFIG_TIMER1 - 7) << TIMER1_POS) |
+			    ((CONFIG_TIMER2 - 7) << TIMER2_POS) |
+			    ((CONFIG_PFA - 7) << PFA_POS) |
+			    ((CONFIG_PFB - 7) << PFB_POS) |
+			    ((CONFIG_MEMDMA0 - 7) << MEMDMA0_POS) |
+			    ((CONFIG_MEMDMA1 - 7) << MEMDMA1_POS) |
+			    ((CONFIG_WDTIMER - 7) << WDTIMER_POS));
+
+	SSYNC();
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/Kconfig
new file mode 100644
index 0000000..1d69b04
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/Kconfig
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0
+if (BF537 || BF534 || BF536)
+
+source "arch/blackfin/mach-bf537/boards/Kconfig"
+
+menu "BF537 Specific Configuration"
+
+comment "Interrupt Priority Assignment"
+menu "Priority"
+
+config IRQ_PLL_WAKEUP
+	int "IRQ_PLL_WAKEUP"
+	default 7
+config IRQ_DMA_ERROR
+	int "IRQ_DMA_ERROR Generic"
+	default 7
+config IRQ_ERROR
+	int "IRQ_ERROR: PPI CAN MAC SPORT0 SPORT1 SPI UART0 UART1"
+	default 11
+config IRQ_RTC
+	int "IRQ_RTC"
+	default 8
+config IRQ_PPI
+	int "IRQ_PPI"
+	default 8
+config IRQ_SPORT0_RX
+	int "IRQ_SPORT0_RX"
+	default 9
+config IRQ_SPORT0_TX
+	int "IRQ_SPORT0_TX"
+	default 9
+config IRQ_SPORT1_RX
+	int "IRQ_SPORT1_RX"
+	default 9
+config IRQ_SPORT1_TX
+	int "IRQ_SPORT1_TX"
+	default 9
+config IRQ_TWI
+	int "IRQ_TWI"
+	default 10
+config IRQ_SPI
+	int "IRQ_SPI"
+	default 10
+config IRQ_UART0_RX
+	int "IRQ_UART0_RX"
+	default 10
+config IRQ_UART0_TX
+	int "IRQ_UART0_TX"
+	default 10
+config IRQ_UART1_RX
+	int "IRQ_UART1_RX"
+	default 10
+config IRQ_UART1_TX
+	int "IRQ_UART1_TX"
+	default 10
+config IRQ_CAN_RX
+	int "IRQ_CAN_RX"
+	default 11
+config IRQ_CAN_TX
+	int "IRQ_CAN_TX"
+	default 11
+config IRQ_MAC_RX
+	int "IRQ_MAC_RX"
+	default 11
+config IRQ_MAC_TX
+	int "IRQ_MAC_TX"
+	default 11
+config IRQ_TIMER0
+	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
+	default 8
+config IRQ_TIMER1
+	int "IRQ_TIMER1"
+	default 12
+config IRQ_TIMER2
+	int "IRQ_TIMER2"
+	default 12
+config IRQ_TIMER3
+	int "IRQ_TIMER3"
+	default 12
+config IRQ_TIMER4
+	int "IRQ_TIMER4"
+	default 12
+config IRQ_TIMER5
+	int "IRQ_TIMER5"
+	default 12
+config IRQ_TIMER6
+	int "IRQ_TIMER6"
+	default 12
+config IRQ_TIMER7
+	int "IRQ_TIMER7"
+	default 12
+config IRQ_PROG_INTA
+	int "IRQ_PROG_INTA"
+	default 12
+config IRQ_PORTG_INTB
+	int "IRQ_PORTG_INTB"
+	default 12
+config IRQ_MEM_DMA0
+	int "IRQ_MEM_DMA0"
+	default 13
+config IRQ_MEM_DMA1
+	int "IRQ_MEM_DMA1"
+	default 13
+config IRQ_WATCH
+	int "IRQ_WATCH"
+	default 13
+
+	help
+	  Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
+	  This applies to all the above.  It is not recommended to assign the
+	  highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/Makefile
new file mode 100644
index 0000000..56994b6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/Makefile
@@ -0,0 +1,5 @@
+#
+# arch/blackfin/mach-bf537/Makefile
+#
+
+obj-y := ints-priority.o dma.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/Kconfig
new file mode 100644
index 0000000..60b7b29
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/Kconfig
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+choice
+	prompt "System type"
+	default BFIN537_STAMP
+	help
+	  Select your board!
+
+config BFIN537_STAMP
+	bool "BF537-STAMP"
+	help
+	  BF537-STAMP board support.
+
+config BFIN537_BLUETECHNIX_CM_E
+	bool "Bluetechnix CM-BF537E"
+	depends on (BF537)
+	help
+	  CM-BF537E support for EVAL- and DEV-Board.
+
+config BFIN537_BLUETECHNIX_CM_U
+	bool "Bluetechnix CM-BF537U"
+	depends on (BF537)
+	help
+	  CM-BF537U support for EVAL- and DEV-Board.
+
+config BFIN537_BLUETECHNIX_TCM
+	bool "Bluetechnix TCM-BF537"
+	depends on (BF537)
+	help
+	  TCM-BF537 support for EVAL- and DEV-Board.
+
+config PNAV10
+	bool "PNAV board"
+	depends on (BF537)
+	help
+	  PNAV board support.
+
+config CAMSIG_MINOTAUR
+	bool "Cambridge Signal Processing LTD Minotaur"
+	depends on (BF537)
+	help
+	  Board supply package for CSP Minotaur
+
+config DNP5370
+	bool "SSV Dil/NetPC DNP/5370"
+	depends on (BF537)
+	help
+	  Board supply package for DNP/5370 DIL64 module
+
+endchoice
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/Makefile
new file mode 100644
index 0000000..47a1acc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# arch/blackfin/mach-bf537/boards/Makefile
+#
+
+obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_CM_E) += cm_bf537e.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_CM_U) += cm_bf537u.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM)  += tcm_bf537.o
+obj-$(CONFIG_PNAV10)                   += pnav10.o
+obj-$(CONFIG_CAMSIG_MINOTAUR)          += minotaur.o
+obj-$(CONFIG_DNP5370)                  += dnp5370.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/cm_bf537e.c
new file mode 100644
index 0000000..1e1014d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -0,0 +1,945 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <asm/bfin_sport.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM BF537E";
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* all SPI peripherals info goes here */
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00020000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = 0x20000
+	}, {
+		.name = "file system(spi)",
+		.size = 0x700000,
+		.offset = 0x00100000,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
+
+/* SPORT SPI controller data */
+static struct bfin5xx_spi_master bfin_sport_spi0_info = {
+	.num_chipselect = MAX_BLACKFIN_GPIOS,
+	.enable_dma = 0,  /* master don't support DMA */
+	.pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
+		P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
+};
+
+static struct resource bfin_sport_spi0_resource[] = {
+	[0] = {
+		.start = SPORT0_TCR1,
+		.end   = SPORT0_TCR1 + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = IRQ_SPORT0_ERROR,
+		.end   = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+		},
+};
+
+static struct platform_device bfin_sport_spi0_device = {
+	.name = "bfin-sport-spi",
+	.id = 1, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
+	.resource = bfin_sport_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_sport_spi0_info, /* Passed to driver */
+	},
+};
+
+static struct bfin5xx_spi_master bfin_sport_spi1_info = {
+	.num_chipselect = MAX_BLACKFIN_GPIOS,
+	.enable_dma = 0,  /* master don't support DMA */
+	.pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
+		P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
+};
+
+static struct resource bfin_sport_spi1_resource[] = {
+	[0] = {
+		.start = SPORT1_TCR1,
+		.end   = SPORT1_TCR1 + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = IRQ_SPORT1_ERROR,
+		.end   = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+		},
+};
+
+static struct platform_device bfin_sport_spi1_device = {
+	.name = "bfin-sport-spi",
+	.id = 2, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
+	.resource = bfin_sport_spi1_resource,
+	.dev = {
+		.platform_data = &bfin_sport_spi1_info, /* Passed to driver */
+	},
+};
+
+#endif  /* sport spi master and devices */
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
+static struct platform_device hitachi_fb_device = {
+	.name = "hitachi-tx09",
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.start = 0x20200300,
+		.end = 0x20200300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF14,
+		.end = IRQ_PF14,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20308000,
+		.end = 0x20308000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20308004,
+		.end = 0x20308004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PG15,
+		.end = IRQ_PG15,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PG13,
+		.end = IRQ_PG13,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
+static struct mtd_partition cm_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0x100000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data cm_flash_data = {
+	.width    = 2,
+	.parts    = cm_partitions,
+	.nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PF4 };
+
+static struct resource cm_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)cm_flash_gpios,
+		.end   = ARRAY_SIZE(cm_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device cm_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &cm_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(cm_flash_resource),
+	.resource      = cm_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+	{
+		/*
+		 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+		 */
+		.start = -1,
+		.end = -1,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		/*
+		 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+		 */
+		.start = -1,
+		.end = -1,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{
+		/*
+		 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+		 */
+		.start = -1,
+		.end = -1,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		/*
+		 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+		 */
+		.start = -1,
+		.end = -1,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \
+|| IS_ENABLED(CONFIG_BFIN_SPORT)
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+#endif
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+#if IS_ENABLED(CONFIG_BFIN_SPORT)
+static struct resource bfin_sport0_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_TX,
+		.end = IRQ_SPORT0_TX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_SPORT0_TX,
+		.end = CH_SPORT0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_SPORT0_RX,
+		.end = CH_SPORT0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sport0_device = {
+	.name = "bfin_sport_raw",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_resources),
+	.resource = bfin_sport0_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_MII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
+};
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
+#define PATA_INT	IRQ_PF14
+
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 2,
+};
+
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x2030C000,
+		.end = 0x2030C01F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2030D018,
+		.end = 0x2030D01B,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = PATA_INT,
+		.end = PATA_INT,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device bfin_pata_device = {
+	.name = "pata_platform",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pata_resources),
+	.resource = bfin_pata_resources,
+	.dev = {
+		.platform_data = &bfin_pata_platform_data,
+	}
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 500000000),
+	VRPAIR(VLEV_125, 533000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *cm_bf537e_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_BFIN_SPORT)
+	&bfin_sport0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
+	&hitachi_fb_device,
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+	&isp1362_hcd_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	&smc91x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	&net2272_bfin_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
+	&bfin_sport_spi0_device,
+	&bfin_sport_spi1_device,
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
+	&bfin_pata_device,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
+	&cm_flash_device,
+#endif
+};
+
+static int __init net2272_init(void)
+{
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	int ret;
+
+	ret = gpio_request(GPIO_PG14, "net2272");
+	if (ret)
+		return ret;
+
+	/* Reset USB Chip, PG14 */
+	gpio_direction_output(GPIO_PG14, 0);
+	mdelay(2);
+	gpio_set_value(GPIO_PG14, 1);
+#endif
+
+	return 0;
+}
+
+static int __init cm_bf537e_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices));
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
+	irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
+#endif
+
+	if (net2272_init())
+		pr_warning("unable to configure net2272; it probably won't work\n");
+
+	return 0;
+}
+
+arch_initcall(cm_bf537e_init);
+
+static struct platform_device *cm_bf537e_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf537e_early_devices,
+		ARRAY_SIZE(cm_bf537e_early_devices));
+}
+
+int bfin_get_ether_addr(char *addr)
+{
+	return 1;
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/cm_bf537u.c
new file mode 100644
index 0000000..d056db9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -0,0 +1,802 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/spi/mmc_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM BF537U";
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* all SPI peripherals info goes here */
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00020000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = 0x20000
+	}, {
+		.name = "file system(spi)",
+		.size = 0x700000,
+		.offset = 0x00100000,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
+static struct platform_device hitachi_fb_device = {
+	.name = "hitachi-tx09",
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.start = 0x20200300,
+		.end = 0x20200300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF14,
+		.end = IRQ_PF14,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20308000,
+		.end = 0x20308000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20308004,
+		.end = 0x20308004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PG15,
+		.end = IRQ_PG15,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20200000,
+		.end = 0x20200000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PH14,
+		.end = IRQ_PH14,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
+static struct mtd_partition cm_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0x100000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data cm_flash_data = {
+	.width    = 2,
+	.parts    = cm_partitions,
+	.nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PH0 };
+
+static struct resource cm_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)cm_flash_gpios,
+		.end   = ARRAY_SIZE(cm_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device cm_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &cm_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(cm_flash_resource),
+	.resource      = cm_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_MII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
+};
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
+#define PATA_INT	IRQ_PF14
+
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 2,
+};
+
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x2030C000,
+		.end = 0x2030C01F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2030D018,
+		.end = 0x2030D01B,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = PATA_INT,
+		.end = PATA_INT,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device bfin_pata_device = {
+	.name = "pata_platform",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pata_resources),
+	.resource = bfin_pata_resources,
+	.dev = {
+		.platform_data = &bfin_pata_platform_data,
+	}
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 500000000),
+	VRPAIR(VLEV_125, 533000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *cm_bf537u_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
+	&hitachi_fb_device,
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+	&isp1362_hcd_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	&smc91x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	&net2272_bfin_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
+	&bfin_pata_device,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
+	&cm_flash_device,
+#endif
+};
+
+static int __init net2272_init(void)
+{
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	int ret;
+
+	ret = gpio_request(GPIO_PH15, driver_name);
+	if (ret)
+		return ret;
+
+	ret = gpio_request(GPIO_PH13, "net2272");
+	if (ret) {
+		gpio_free(GPIO_PH15);
+		return ret;
+	}
+
+	/* Set PH15 Low make /AMS2 work properly */
+	gpio_direction_output(GPIO_PH15, 0);
+
+	/* enable CLKBUF output */
+	bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE);
+
+	/* Reset the USB chip */
+	gpio_direction_output(GPIO_PH13, 0);
+	mdelay(2);
+	gpio_set_value(GPIO_PH13, 1);
+#endif
+
+	return 0;
+}
+
+static int __init cm_bf537u_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(cm_bf537u_devices, ARRAY_SIZE(cm_bf537u_devices));
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
+	irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
+#endif
+
+	if (net2272_init())
+		pr_warning("unable to configure net2272; it probably won't work\n");
+
+	return 0;
+}
+
+arch_initcall(cm_bf537u_init);
+
+static struct platform_device *cm_bf537u_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf537u_early_devices,
+		ARRAY_SIZE(cm_bf537u_early_devices));
+}
+
+int bfin_get_ether_addr(char *addr)
+{
+	return 1;
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/dnp5370.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/dnp5370.c
new file mode 100644
index 0000000..c4a8ffb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/dnp5370.c
@@ -0,0 +1,413 @@
+/*
+ * This is the configuration for SSV Dil/NetPC DNP/5370 board.
+ *
+ * DIL module:         http://www.dilnetpc.com/dnp0086.htm
+ * SK28 (starter kit): http://www.dilnetpc.com/dnp0088.htm
+ *
+ * Copyright 2010 3ality Digital Systems
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/phy.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "DNP/5370";
+#define FLASH_MAC               0x202f0000
+#define CONFIG_MTD_PHYSMAP_LEN  0x300000
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = PHY_POLL, /* IRQ_MAC_PHYINT */
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number   = 1,
+	.phydev_data     = bfin_phydev_data,
+	.phy_mode        = PHY_INTERFACE_MODE_RMII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+static struct mtd_partition asmb_flash_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x30000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel and rootfs(nor)",
+		.size       = 0x300000 - 0x30000 - 0x10000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "MAC address(nor)",
+		.size       = 0x10000,
+		.offset     = MTDPART_OFS_APPEND,
+		.mask_flags = MTD_WRITEABLE,
+	}
+};
+
+static struct physmap_flash_data asmb_flash_data = {
+	.width      = 1,
+	.parts      = asmb_flash_partitions,
+	.nr_parts   = ARRAY_SIZE(asmb_flash_partitions),
+};
+
+static struct resource asmb_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x202fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+/* 4 MB NOR flash attached to async memory banks 0-2,
+ * therefore only 3 MB visible.
+ */
+static struct platform_device asmb_flash_device = {
+	.name	  = "physmap-flash",
+	.id	  = 0,
+	.dev = {
+		.platform_data = &asmb_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &asmb_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma    = 0,	 /* use no dma transfer with this chip*/
+};
+
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
+/* This mapping is for at45db642 it has 1056 page size,
+ * partition size and offset should be page aligned
+ */
+static struct mtd_partition bfin_spi_dataflash_partitions[] = {
+	{
+		.name   = "JFFS2 dataflash(nor)",
+#ifdef CONFIG_MTD_PAGESIZE_1024
+		.offset = 0x40000,
+		.size   = 0x7C0000,
+#else
+		.offset = 0x0,
+		.size   = 0x840000,
+#endif
+	}
+};
+
+static struct flash_platform_data bfin_spi_dataflash_data = {
+	.name     = "mtd_dataflash",
+	.parts    = bfin_spi_dataflash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
+	.type     = "mtd_dataflash",
+};
+
+static struct bfin5xx_spi_chip spi_dataflash_chip_info = {
+	.enable_dma    = 0,	 /* use no dma transfer with this chip*/
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+/* SD/MMC card reader at SPI bus */
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias	 = "mmc_spi",
+		.max_speed_hz    = 20000000,
+		.bus_num	 = 0,
+		.chip_select     = 1,
+		.controller_data = &mmc_spi_chip_info,
+		.mode	         = SPI_MODE_3,
+	},
+#endif
+
+/* 8 Megabyte Atmel NOR flash chip at SPI bus */
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
+	{
+	.modalias        = "mtd_dataflash",
+	.max_speed_hz    = 16700000,
+	.bus_num         = 0,
+	.chip_select     = 2,
+	.platform_data   = &bfin_spi_dataflash_data,
+	.controller_data = &spi_dataflash_chip_info,
+	.mode            = SPI_MODE_3, /* SPI_CPHA and SPI_CPOL */
+	},
+#endif
+};
+
+/* SPI controller data */
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+	.num_chipselect = 8,
+	.enable_dma     = 1,  /* master has the ability to do dma transfer */
+	.pin_req        = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device spi_bfin_master_device = {
+	.name          = "bfin-spi",
+	.id            = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource      = bfin_spi0_resource,
+	.dev           = {
+		.platform_data = &spi_bfin_master_info, /* Passed to driver */
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end   = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end   = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end   = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end   = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end   = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end   = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name          = "bfin-uart",
+	.id            = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource      = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name          = "i2c-bfin-twi",
+	.id            = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource      = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+#endif
+
+static struct platform_device *dnp5370_devices[] __initdata = {
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+	&asmb_flash_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&spi_bfin_master_device,
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi_device,
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+};
+
+static int __init dnp5370_init(void)
+{
+	printk(KERN_INFO "DNP/5370: registering device resources\n");
+	platform_add_devices(dnp5370_devices, ARRAY_SIZE(dnp5370_devices));
+	printk(KERN_INFO "DNP/5370: registering %zu SPI slave devices\n",
+	       ARRAY_SIZE(bfin_spi_board_info));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	printk(KERN_INFO "DNP/5370: MAC %pM\n", (void *)FLASH_MAC);
+	return 0;
+}
+arch_initcall(dnp5370_init);
+
+/*
+ * Currently the MAC address is saved in Flash by U-Boot
+ */
+int bfin_get_ether_addr(char *addr)
+{
+	*(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
+	*(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
+	return 0;
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/minotaur.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/minotaur.c
new file mode 100644
index 0000000..dd7bda0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -0,0 +1,585 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Cambridge Signal Processing
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/sl811.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/portmux.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "CamSig Minotaur BF537";
+
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
+static struct resource bfin_pcmcia_cf_resources[] = {
+	{
+		.start = 0x20310000, /* IO PORT */
+		.end = 0x20312000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20311000, /* Attribute Memory */
+		.end = 0x20311FFF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF4,
+		.end = IRQ_PF4,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	}, {
+		.start = IRQ_PF6, /* Card Detect PF6 */
+		.end = IRQ_PF6,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+	.name = "bfin_cf_pcmcia",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+	.resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_MII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* all SPI peripherals info goes here */
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+
+/* Partition sizes */
+#define FLASH_SIZE       0x00400000
+#define PSIZE_UBOOT      0x00030000
+#define PSIZE_INITRAMFS  0x00240000
+
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name       = "bootloader(spi)",
+		.size       = PSIZE_UBOOT,
+		.offset     = 0x000000,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name       = "initramfs(spi)",
+		.size       = PSIZE_INITRAMFS,
+		.offset     = PSIZE_UBOOT
+	}, {
+		.name       = "opt(spi)",
+		.size       = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS),
+		.offset     = PSIZE_UBOOT + PSIZE_INITRAMFS,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+static struct platform_device *minotaur_devices[] __initdata = {
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
+	&bfin_pcmcia_cf_device,
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	&net2272_bfin_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+};
+
+static int __init minotaur_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices));
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	spi_register_board_info(bfin_spi_board_info,
+				ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+	return 0;
+}
+
+arch_initcall(minotaur_init);
+
+static struct platform_device *minotaur_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(minotaur_early_devices,
+		ARRAY_SIZE(minotaur_early_devices));
+}
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/pnav10.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/pnav10.c
new file mode 100644
index 0000000..06a50dd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -0,0 +1,538 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "ADI PNAV-1.0";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
+static struct resource bfin_pcmcia_cf_resources[] = {
+	{
+		.start = 0x20310000, /* IO PORT */
+		.end = 0x20312000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20311000, /* Attribute Memory */
+		.end = 0x20311FFF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF4,
+		.end = IRQ_PF4,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	}, {
+		.start = 6, /* Card Detect PF6 */
+		.end = 6,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+	.name = "bfin_cf_pcmcia",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+	.resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_RMII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* all SPI peripherals info goes here */
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00020000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = 0x20000
+	}, {
+		.name = "file system(spi)",
+		.size = 0x700000,
+		.offset = 0x00100000,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity 	= 1,
+	.first_conversion_delay = 3,
+	.acquisition_time 	= 1,
+	.averaging 		= 1,
+	.pen_down_acc_interval 	= 1,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+	},
+#endif
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+{
+	.modalias		= "ad7877",
+	.platform_data		= &bfin_ad7877_ts_info,
+	.irq			= IRQ_PF2,
+	.max_speed_hz		= 12500000,     /* max spi clock (SCK) speed in HZ */
+	.bus_num		= 0,
+	.chip_select  		= 5,
+},
+#endif
+
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
+static struct platform_device bfin_fb_device = {
+	.name = "bf537-lq035",
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+static struct platform_device *stamp_devices[] __initdata = {
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
+	&bfin_pcmcia_cf_device,
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	&smc91x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	&net2272_bfin_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
+	&bfin_fb_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+};
+
+static int __init pnav_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	spi_register_board_info(bfin_spi_board_info,
+				ARRAY_SIZE(bfin_spi_board_info));
+#endif
+	return 0;
+}
+
+arch_initcall(pnav_init);
+
+static struct platform_device *stamp_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(stamp_early_devices,
+		ARRAY_SIZE(stamp_early_devices));
+}
+
+int bfin_get_ether_addr(char *addr)
+{
+	return 1;
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/stamp.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/stamp.c
new file mode 100644
index 0000000..400e669
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/stamp.c
@@ -0,0 +1,3019 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/i2c.h>
+#include <linux/platform_data/adp5588.h>
+#include <linux/etherdevice.h>
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/sl811.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <asm/bfin_sport.h>
+#ifdef CONFIG_REGULATOR_FIXED_VOLTAGE
+#include <linux/regulator/fixed.h>
+#endif
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/userspace-consumer.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "ADI BF537-STAMP";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
+#include <linux/usb/isp1760.h>
+static struct resource bfin_isp1760_resources[] = {
+	[0] = {
+		.start  = 0x203C0000,
+		.end    = 0x203C0000 + 0x000fffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_PF7,
+		.end    = IRQ_PF7,
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct isp1760_platform_data isp1760_priv = {
+	.is_isp1761 = 0,
+	.bus_width_16 = 1,
+	.port1_otg = 0,
+	.analog_oc = 0,
+	.dack_polarity_high = 0,
+	.dreq_polarity_high = 0,
+};
+
+static struct platform_device bfin_isp1760_device = {
+	.name           = "isp1760",
+	.id             = 0,
+	.dev = {
+		.platform_data = &isp1760_priv,
+	},
+	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
+	.resource       = bfin_isp1760_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"},
+	{BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"},
+	{BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
+static struct resource bfin_pcmcia_cf_resources[] = {
+	{
+		.start = 0x20310000, /* IO PORT */
+		.end = 0x20312000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20311000, /* Attribute Memory */
+		.end = 0x20311FFF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF4,
+		.end = IRQ_PF4,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	}, {
+		.start = 6, /* Card Detect PF6 */
+		.end = 6,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+	.name = "bfin_cf_pcmcia",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+	.resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_DM9000)
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= 0x203FB800,
+		.end	= 0x203FB800 + 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0x203FB804,
+		.end	= 0x203FB804 + 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_PF9,
+		.end	= IRQ_PF9,
+		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+	},
+};
+
+static struct platform_device dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_SL811_HCD)
+static struct resource sl811_hcd_resources[] = {
+	{
+		.start = 0x20340000,
+		.end = 0x20340000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20340004,
+		.end = 0x20340004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF4,
+		.end = IRQ_PF4,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+void sl811_port_power(struct device *dev, int is_on)
+{
+	gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
+}
+#endif
+
+static struct sl811_platform_data sl811_priv = {
+	.potpg = 10,
+	.power = 250,       /* == 500mA */
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+	.port_power = &sl811_port_power,
+#endif
+};
+
+static struct platform_device sl811_hcd_device = {
+	.name = "sl811-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &sl811_priv,
+	},
+	.num_resources = ARRAY_SIZE(sl811_hcd_resources),
+	.resource = sl811_hcd_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20360000,
+		.end = 0x20360000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20360004,
+		.end = 0x20360004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF3,
+		.end = IRQ_PF3,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_CAN_BFIN)
+static unsigned short bfin_can_peripherals[] = {
+	P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static struct resource bfin_can_resources[] = {
+	{
+		.start = 0xFFC02A00,
+		.end = 0xFFC02FFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CAN_RX,
+		.end = IRQ_CAN_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN_TX,
+		.end = IRQ_CAN_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN_ERROR,
+		.end = IRQ_CAN_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_can_device = {
+	.name = "bfin_can",
+	.num_resources = ARRAY_SIZE(bfin_can_resources),
+	.resource = bfin_can_resources,
+	.dev = {
+		.platform_data = &bfin_can_peripherals, /* Passed to driver */
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = PHY_POLL, /* IRQ_MAC_PHYINT */
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_MII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 1,
+		.flags = IORESOURCE_BUS,
+	}, {
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
+const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
+
+static struct mtd_partition bfin_plat_nand_partitions[] = {
+	{
+		.name   = "linux kernel(nand)",
+		.size   = 0x400000,
+		.offset = 0,
+	}, {
+		.name   = "file system(nand)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	},
+};
+
+#define BFIN_NAND_PLAT_CLE 2
+#define BFIN_NAND_PLAT_ALE 1
+static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd_to_nand(mtd);
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
+	else
+		writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
+}
+
+#define BFIN_NAND_PLAT_READY GPIO_PF3
+static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(BFIN_NAND_PLAT_READY);
+}
+
+static struct platform_nand_data bfin_plat_nand_data = {
+	.chip = {
+		.nr_chips = 1,
+		.chip_delay = 30,
+		.part_probe_types = part_probes,
+		.partitions = bfin_plat_nand_partitions,
+		.nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
+	},
+	.ctrl = {
+		.cmd_ctrl  = bfin_plat_nand_cmd_ctrl,
+		.dev_ready = bfin_plat_nand_dev_ready,
+	},
+};
+
+#define MAX(x, y) (x > y ? x : y)
+static struct resource bfin_plat_nand_resources = {
+	.start = 0x20212000,
+	.end   = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device bfin_async_nand_device = {
+	.name = "gen_nand",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_plat_nand_resources,
+	.dev = {
+		.platform_data = &bfin_plat_nand_data,
+	},
+};
+
+static void bfin_plat_nand_init(void)
+{
+	gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
+	gpio_direction_input(BFIN_NAND_PLAT_READY);
+}
+#else
+static void bfin_plat_nand_init(void) {}
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+static struct mtd_partition stamp_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x180000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = 0x400000 - 0x40000 - 0x180000 - 0x10000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "MAC Address(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = 0x3F0000,
+		.mask_flags = MTD_WRITEABLE,
+	}
+};
+
+static struct physmap_flash_data stamp_flash_data = {
+	.width      = 2,
+	.parts      = stamp_partitions,
+	.nr_parts   = ARRAY_SIZE(stamp_partitions),
+#ifdef CONFIG_ROMKERNEL
+	.probe_type = "map_rom",
+#endif
+};
+
+static struct resource stamp_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x203fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device stamp_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &stamp_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &stamp_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0x180000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	/* .type = "m25p64", */
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI)
+#include <linux/input/ad714x.h>
+
+static struct ad714x_slider_plat ad7147_spi_slider_plat[] = {
+	{
+		.start_stage = 0,
+		.end_stage = 7,
+		.max_coord = 128,
+	},
+};
+
+static struct ad714x_button_plat ad7147_spi_button_plat[] = {
+	{
+		.keycode = BTN_FORWARD,
+		.l_mask = 0,
+		.h_mask = 0x600,
+	},
+	{
+		.keycode = BTN_LEFT,
+		.l_mask = 0,
+		.h_mask = 0x500,
+	},
+	{
+		.keycode = BTN_MIDDLE,
+		.l_mask = 0,
+		.h_mask = 0x800,
+	},
+	{
+		.keycode = BTN_RIGHT,
+		.l_mask = 0x100,
+		.h_mask = 0x400,
+	},
+	{
+		.keycode = BTN_BACK,
+		.l_mask = 0x200,
+		.h_mask = 0x400,
+	},
+};
+static struct ad714x_platform_data ad7147_spi_platform_data = {
+	.slider_num = 1,
+	.button_num = 5,
+	.slider = ad7147_spi_slider_plat,
+	.button = ad7147_spi_button_plat,
+	.stage_cfg_reg =  {
+		{0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
+		{0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600},
+		{0xFF7B, 0x3FFF, 0x506,  0x2626, 1100, 1100, 1150, 1150},
+		{0xFDFE, 0x3FFF, 0x606,  0x2626, 1100, 1100, 1150, 1150},
+		{0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300},
+		{0xFFEF, 0x1FFF, 0x0,    0x2626, 1100, 1100, 1150, 1150},
+	},
+	.sys_cfg_reg = {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C)
+#include <linux/input/ad714x.h>
+static struct ad714x_button_plat ad7142_i2c_button_plat[] = {
+	{
+		.keycode = BTN_1,
+		.l_mask = 0,
+		.h_mask = 0x1,
+	},
+	{
+		.keycode = BTN_2,
+		.l_mask = 0,
+		.h_mask = 0x2,
+	},
+	{
+		.keycode = BTN_3,
+		.l_mask = 0,
+		.h_mask = 0x4,
+	},
+	{
+		.keycode = BTN_4,
+		.l_mask = 0x0,
+		.h_mask = 0x8,
+	},
+};
+static struct ad714x_platform_data ad7142_i2c_platform_data = {
+	.button_num = 4,
+	.button = ad7142_i2c_button_plat,
+	.stage_cfg_reg =  {
+		/* fixme: figure out right setting for all comoponent according
+		 * to hardware feature of EVAL-AD7142EB board */
+		{0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+		{0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+		{0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+		{0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+	},
+	.sys_cfg_reg = {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_AD2S90)
+static struct bfin5xx_spi_chip ad2s90_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_AD2S1200)
+static unsigned short ad2s1200_platform_data[] = {
+	/* used as SAMPLE and RDVEL */
+	GPIO_PF5, GPIO_PF6, 0
+};
+
+static struct bfin5xx_spi_chip ad2s1200_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_AD2S1210)
+static unsigned short ad2s1210_platform_data[] = {
+	/* use as SAMPLE, A0, A1 */
+	GPIO_PF7, GPIO_PF8, GPIO_PF9,
+# if defined(CONFIG_AD2S1210_GPIO_INPUT) || defined(CONFIG_AD2S1210_GPIO_OUTPUT)
+	/* the RES0 and RES1 pins */
+	GPIO_PF4, GPIO_PF5,
+# endif
+	0,
+};
+
+static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SENSORS_AD7314)
+static struct bfin5xx_spi_chip ad7314_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_AD7816)
+static unsigned short ad7816_platform_data[] = {
+	GPIO_PF4, /* rdwr_pin */
+	GPIO_PF5, /* convert_pin */
+	GPIO_PF7, /* busy_pin */
+	0,
+};
+
+static struct bfin5xx_spi_chip ad7816_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_ADT7310)
+static unsigned long adt7310_platform_data[3] = {
+/* INT bound temperature alarm event. line 1 */
+	IRQ_PG4, IRQF_TRIGGER_LOW,
+/* CT bound temperature alarm event irq_flags. line 0 */
+	IRQF_TRIGGER_LOW,
+};
+
+static struct bfin5xx_spi_chip adt7310_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_AD7298)
+static unsigned short ad7298_platform_data[] = {
+	GPIO_PF7, /* busy_pin */
+	0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_ADT7316_SPI)
+static unsigned long adt7316_spi_data[2] = {
+	IRQF_TRIGGER_LOW, /* interrupt flags */
+	GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
+};
+
+static struct bfin5xx_spi_chip adt7316_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
+
+static int bfin_mmc_spi_init(struct device *dev,
+	irqreturn_t (*detect_int)(int, void *), void *data)
+{
+	return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
+		IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
+}
+
+static void bfin_mmc_spi_exit(struct device *dev, void *data)
+{
+	free_irq(MMC_SPI_CARD_DETECT_INT, data);
+}
+
+static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
+	.init = bfin_mmc_spi_init,
+	.exit = bfin_mmc_spi_exit,
+	.detect_delay = 100, /* msecs */
+};
+
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+	.pio_interrupt = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+#include <linux/spi/ad7877.h>
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity	= 1,
+	.first_conversion_delay	= 3,
+	.acquisition_time	= 1,
+	.averaging		= 1,
+	.pen_down_acc_interval	= 1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
+#include <linux/platform_data/ad7879.h>
+static const struct ad7879_platform_data bfin_ad7879_ts_info = {
+	.model			= 7879,	/* Model = AD7879 */
+	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
+	.pressure_max		= 10000,
+	.pressure_min		= 0,
+	.first_conversion_delay	= 3,	/* wait 512us before do a first conversion */
+	.acquisition_time	= 1,	/* 4us acquisition time per sample */
+	.median			= 2,	/* do 8 measurements */
+	.averaging		= 1,	/* take the average of 4 middle samples */
+	.pen_down_acc_interval	= 255,	/* 9.4 ms */
+	.gpio_export		= 1,	/* Export GPIO to gpiolib */
+	.gpio_base		= -1,	/* Dynamic allocation */
+};
+#endif
+
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
+#include <linux/input/adxl34x.h>
+static const struct adxl34x_platform_data adxl34x_info = {
+	.x_axis_offset = 0,
+	.y_axis_offset = 0,
+	.z_axis_offset = 0,
+	.tap_threshold = 0x31,
+	.tap_duration = 0x10,
+	.tap_latency = 0x60,
+	.tap_window = 0xF0,
+	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+	.act_axis_control = 0xFF,
+	.activity_threshold = 5,
+	.inactivity_threshold = 3,
+	.inactivity_time = 4,
+	.free_fall_threshold = 0x7,
+	.free_fall_time = 0x20,
+	.data_rate = 0x8,
+	.data_range = ADXL_FULL_RES,
+
+	.ev_type = EV_ABS,
+	.ev_code_x = ABS_X,		/* EV_REL */
+	.ev_code_y = ABS_Y,		/* EV_REL */
+	.ev_code_z = ABS_Z,		/* EV_REL */
+
+	.ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
+
+/*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
+/*	.ev_code_act_inactivity = KEY_A,*/	/* EV_KEY */
+	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+	.fifo_mode = ADXL_FIFO_STREAM,
+	.orientation_enable = ADXL_EN_ORIENTATION_3D,
+	.deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
+	.divisor_length =  ADXL_LP_FILTER_DIVISOR_16,
+	/* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
+	.ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_ENC28J60)
+static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
+	.enable_dma	= 1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_ADF702X)
+#include <linux/spi/adf702x.h>
+#define TXREG 0x0160A470
+static const u32 adf7021_regs[] = {
+	0x09608FA0,
+	0x00575011,
+	0x00A7F092,
+	0x2B141563,
+	0x81F29E94,
+	0x00003155,
+	0x050A4F66,
+	0x00000007,
+	0x00000008,
+	0x000231E9,
+	0x3296354A,
+	0x891A2B3B,
+	0x00000D9C,
+	0x0000000D,
+	0x0000000E,
+	0x0000000F,
+};
+
+static struct adf702x_platform_data adf7021_platform_data = {
+	.regs_base = (void *)SPORT1_TCR1,
+	.dma_ch_rx = CH_SPORT1_RX,
+	.dma_ch_tx = CH_SPORT1_TX,
+	.irq_sport_err = IRQ_SPORT1_ERROR,
+	.gpio_int_rfs = GPIO_PF8,
+	.pin_req = {P_SPORT1_DTPRI, P_SPORT1_RFS, P_SPORT1_DRPRI,
+			P_SPORT1_RSCLK, P_SPORT1_TSCLK, 0},
+	.adf702x_model = MODEL_ADF7021,
+	.adf702x_regs = adf7021_regs,
+	.tx_reg = TXREG,
+};
+static inline void adf702x_mac_init(void)
+{
+	eth_random_addr(adf7021_platform_data.mac_addr);
+}
+#else
+static inline void adf702x_mac_init(void) {}
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846)
+#include <linux/spi/ads7846.h>
+static int ads7873_get_pendown_state(void)
+{
+	return gpio_get_value(GPIO_PF6);
+}
+
+static struct ads7846_platform_data __initdata ad7873_pdata = {
+	.model		= 7873,		/* AD7873 */
+	.x_max		= 0xfff,
+	.y_max		= 0xfff,
+	.x_plate_ohms	= 620,
+	.debounce_max	= 1,
+	.debounce_rep	= 0,
+	.debounce_tol	= (~0),
+	.get_pendown_state = ads7873_get_pendown_state,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
+
+static struct mtd_partition bfin_spi_dataflash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0x180000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_dataflash_data = {
+	.name = "SPI Dataflash",
+	.parts = bfin_spi_dataflash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
+};
+
+/* DataFlash chip */
+static struct bfin5xx_spi_chip data_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_AD7476)
+static struct bfin5xx_spi_chip spi_ad7476_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
+	{	/* DataFlash chip */
+		.modalias = "mtd_dataflash",
+		.max_speed_hz = 33250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_dataflash_data,
+		.controller_data = &data_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+	{
+		.modalias = "ad1836",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+		.platform_data = "ad1836", /* only includes chip name for the moment */
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#ifdef CONFIG_SND_SOC_AD193X_SPI
+	{
+		.modalias = "ad193x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X)
+	{
+		.modalias = "adav801",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI)
+	{
+		.modalias = "ad714x_captouch",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.irq = IRQ_PF4,
+		.bus_num = 0,
+		.chip_select = 5,
+		.mode = SPI_MODE_3,
+		.platform_data = &ad7147_spi_platform_data,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_AD2S90)
+	{
+		.modalias = "ad2s90",
+		.bus_num = 0,
+		.chip_select = 3,            /* change it for your board */
+		.mode = SPI_MODE_3,
+		.platform_data = NULL,
+		.controller_data = &ad2s90_spi_chip_info,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_AD2S1200)
+	{
+		.modalias = "ad2s1200",
+		.bus_num = 0,
+		.chip_select = 4,            /* CS, change it for your board */
+		.platform_data = ad2s1200_platform_data,
+		.controller_data = &ad2s1200_spi_chip_info,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_AD2S1210)
+	{
+		.modalias = "ad2s1210",
+		.max_speed_hz = 8192000,
+		.bus_num = 0,
+		.chip_select = 4,            /* CS, change it for your board */
+		.platform_data = ad2s1210_platform_data,
+		.controller_data = &ad2s1210_spi_chip_info,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SENSORS_AD7314)
+	{
+		.modalias = "ad7314",
+		.max_speed_hz = 1000000,
+		.bus_num = 0,
+		.chip_select = 4,            /* CS, change it for your board */
+		.controller_data = &ad7314_spi_chip_info,
+		.mode = SPI_MODE_1,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_AD7816)
+	{
+		.modalias = "ad7818",
+		.max_speed_hz = 1000000,
+		.bus_num = 0,
+		.chip_select = 4,            /* CS, change it for your board */
+		.platform_data = ad7816_platform_data,
+		.controller_data = &ad7816_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_ADT7310)
+	{
+		.modalias = "adt7310",
+		.max_speed_hz = 1000000,
+		.irq = IRQ_PG5,		/* CT alarm event. Line 0 */
+		.bus_num = 0,
+		.chip_select = 4,	/* CS, change it for your board */
+		.platform_data = adt7310_platform_data,
+		.controller_data = &adt7310_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_AD7298)
+	{
+		.modalias = "ad7298",
+		.max_speed_hz = 1000000,
+		.bus_num = 0,
+		.chip_select = 4,            /* CS, change it for your board */
+		.platform_data = ad7298_platform_data,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_ADT7316_SPI)
+	{
+		.modalias = "adt7316",
+		.max_speed_hz = 1000000,
+		.irq = IRQ_PG5,		/* interrupt line */
+		.bus_num = 0,
+		.chip_select = 4,	/* CS, change it for your board */
+		.platform_data = adt7316_spi_data,
+		.controller_data = &adt7316_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+		.platform_data = &bfin_mmc_spi_pdata,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PF6,
+		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select  = 1,
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
+	{
+		.modalias = "ad7879",
+		.platform_data = &bfin_ad7879_ts_info,
+		.irq = IRQ_PF7,
+		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+	},
+#endif
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+	{
+		.modalias = "bfin-lq035q1-spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 2,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ENC28J60)
+	{
+		.modalias = "enc28j60",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.irq = IRQ_PF6,
+		.bus_num = 0,
+		.chip_select = GPIO_PF10 + MAX_CTRL_CS,	/* GPIO controlled SSEL */
+		.controller_data = &enc28j60_spi_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI)
+	{
+		.modalias	= "adxl34x",
+		.platform_data	= &adxl34x_info,
+		.irq		= IRQ_PF6,
+		.max_speed_hz	= 5000000,    /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select	= 2,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADF702X)
+	{
+		.modalias = "adf702x",
+		.max_speed_hz = 16000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = GPIO_PF10 + MAX_CTRL_CS,	/* GPIO controlled SSEL */
+		.platform_data = &adf7021_platform_data,
+		.mode = SPI_MODE_0,
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846)
+	{
+		.modalias = "ads7846",
+		.max_speed_hz = 2000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.irq = IRQ_PF6,
+		.chip_select = GPIO_PF10 + MAX_CTRL_CS,	/* GPIO controlled SSEL */
+		.platform_data = &ad7873_pdata,
+		.mode = SPI_MODE_0,
+	},
+#endif
+#if IS_ENABLED(CONFIG_AD7476)
+	{
+		.modalias = "ad7476", /* Name of spi_driver for this device */
+		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.controller_data = &spi_ad7476_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADE7753)
+	{
+		.modalias = "ade7753",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_1,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADE7754)
+	{
+		.modalias = "ade7754",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_1,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADE7758)
+	{
+		.modalias = "ade7758",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_1,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADE7759)
+	{
+		.modalias = "ade7759",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_1,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADE7854_SPI)
+	{
+		.modalias = "ade7854",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADIS16060)
+	{
+		.modalias = "adis16060_r",
+		.max_speed_hz = 2900000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = MAX_CTRL_CS + 1, /* CS for read, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_0,
+	},
+	{
+		.modalias = "adis16060_w",
+		.max_speed_hz = 2900000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 2, /* CS for write, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_1,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADIS16130)
+	{
+		.modalias = "adis16130",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1, /* CS for read, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADIS16201)
+	{
+		.modalias = "adis16201",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADIS16203)
+	{
+		.modalias = "adis16203",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADIS16204)
+	{
+		.modalias = "adis16204",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADIS16209)
+	{
+		.modalias = "adis16209",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADIS16220)
+	{
+		.modalias = "adis16220",
+		.max_speed_hz = 2000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADIS16240)
+	{
+		.modalias = "adis16240",
+		.max_speed_hz = 1500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADIS16260)
+	{
+		.modalias = "adis16260",
+		.max_speed_hz = 1500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADIS16261)
+	{
+		.modalias = "adis16261",
+		.max_speed_hz = 2500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADIS16300)
+	{
+		.modalias = "adis16300",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADIS16350)
+	{
+		.modalias = "adis16364",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if IS_ENABLED(CONFIG_ADIS16400)
+	{
+		.modalias = "adis16400",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
+
+/* SPORT SPI controller data */
+static struct bfin5xx_spi_master bfin_sport_spi0_info = {
+	.num_chipselect = MAX_BLACKFIN_GPIOS,
+	.enable_dma = 0,  /* master don't support DMA */
+	.pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
+		P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
+};
+
+static struct resource bfin_sport_spi0_resource[] = {
+	[0] = {
+		.start = SPORT0_TCR1,
+		.end   = SPORT0_TCR1 + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = IRQ_SPORT0_ERROR,
+		.end   = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+		},
+};
+
+static struct platform_device bfin_sport_spi0_device = {
+	.name = "bfin-sport-spi",
+	.id = 1, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
+	.resource = bfin_sport_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_sport_spi0_info, /* Passed to driver */
+	},
+};
+
+static struct bfin5xx_spi_master bfin_sport_spi1_info = {
+	.num_chipselect = MAX_BLACKFIN_GPIOS,
+	.enable_dma = 0,  /* master don't support DMA */
+	.pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
+		P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
+};
+
+static struct resource bfin_sport_spi1_resource[] = {
+	[0] = {
+		.start = SPORT1_TCR1,
+		.end   = SPORT1_TCR1 + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = IRQ_SPORT1_ERROR,
+		.end   = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+		},
+};
+
+static struct platform_device bfin_sport_spi1_device = {
+	.name = "bfin-sport-spi",
+	.id = 2, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
+	.resource = bfin_sport_spi1_resource,
+	.dev = {
+		.platform_data = &bfin_sport_spi1_info, /* Passed to driver */
+	},
+};
+
+#endif  /* sport spi master and devices */
+
+#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
+static struct platform_device bfin_fb_device = {
+	.name = "bf537_lq035",
+};
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+#include <asm/bfin-lq035q1.h>
+
+static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
+	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.ppi_mode = USE_RGB565_16_BIT_PPI,
+	.use_bl = 0,	/* let something else control the LCD Blacklight */
+	.gpio_bl = GPIO_PF7,
+};
+
+static struct resource bfin_lq035q1_resources[] = {
+	{
+		.start = IRQ_PPI_ERROR,
+		.end = IRQ_PPI_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_lq035q1_device = {
+	.name		= "bfin-lq035q1",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(bfin_lq035q1_resources),
+	.resource	= bfin_lq035q1_resources,
+	.dev		= {
+		.platform_data = &bfin_lq035q1_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_capture.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req[] = {
+	P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+	P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+	P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+	0,
+};
+
+static const struct ppi_info ppi_info = {
+	.type = PPI_TYPE_PPI,
+	.dma_ch = CH_PPI,
+	.irq_err = IRQ_PPI_ERROR,
+	.base = (void __iomem *)PPI_CONTROL,
+	.pin_req = ppi_req,
+};
+
+#if IS_ENABLED(CONFIG_VIDEO_VS6624)
+static struct v4l2_input vs6624_inputs[] = {
+	{
+		.index = 0,
+		.name = "Camera",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = V4L2_STD_UNKNOWN,
+	},
+};
+
+static struct bcap_route vs6624_routes[] = {
+	{
+		.input = 0,
+		.output = 0,
+	},
+};
+
+static const unsigned vs6624_ce_pin = GPIO_PF10;
+
+static struct bfin_capture_config bfin_capture_data = {
+	.card_name = "BF537",
+	.inputs = vs6624_inputs,
+	.num_inputs = ARRAY_SIZE(vs6624_inputs),
+	.routes = vs6624_routes,
+	.i2c_adapter_id = 0,
+	.board_info = {
+		.type = "vs6624",
+		.addr = 0x10,
+		.platform_data = (void *)&vs6624_ce_pin,
+	},
+	.ppi_info = &ppi_info,
+	.ppi_control = (PACK_EN | DLEN_8 | XFR_TYPE | 0x0020),
+};
+#endif
+
+static struct platform_device bfin_capture_device = {
+	.name = "bfin_capture",
+	.dev = {
+		.platform_data = &bfin_capture_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PG7,
+		.end = GPIO_PG7,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PG6,
+		.end = GPIO_PG6,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588)
+static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
+	[0]	 = KEY_GRAVE,
+	[1]	 = KEY_1,
+	[2]	 = KEY_2,
+	[3]	 = KEY_3,
+	[4]	 = KEY_4,
+	[5]	 = KEY_5,
+	[6]	 = KEY_6,
+	[7]	 = KEY_7,
+	[8]	 = KEY_8,
+	[9]	 = KEY_9,
+	[10]	 = KEY_0,
+	[11]	 = KEY_MINUS,
+	[12]	 = KEY_EQUAL,
+	[13]	 = KEY_BACKSLASH,
+	[15]	 = KEY_KP0,
+	[16]	 = KEY_Q,
+	[17]	 = KEY_W,
+	[18]	 = KEY_E,
+	[19]	 = KEY_R,
+	[20]	 = KEY_T,
+	[21]	 = KEY_Y,
+	[22]	 = KEY_U,
+	[23]	 = KEY_I,
+	[24]	 = KEY_O,
+	[25]	 = KEY_P,
+	[26]	 = KEY_LEFTBRACE,
+	[27]	 = KEY_RIGHTBRACE,
+	[29]	 = KEY_KP1,
+	[30]	 = KEY_KP2,
+	[31]	 = KEY_KP3,
+	[32]	 = KEY_A,
+	[33]	 = KEY_S,
+	[34]	 = KEY_D,
+	[35]	 = KEY_F,
+	[36]	 = KEY_G,
+	[37]	 = KEY_H,
+	[38]	 = KEY_J,
+	[39]	 = KEY_K,
+	[40]	 = KEY_L,
+	[41]	 = KEY_SEMICOLON,
+	[42]	 = KEY_APOSTROPHE,
+	[43]	 = KEY_BACKSLASH,
+	[45]	 = KEY_KP4,
+	[46]	 = KEY_KP5,
+	[47]	 = KEY_KP6,
+	[48]	 = KEY_102ND,
+	[49]	 = KEY_Z,
+	[50]	 = KEY_X,
+	[51]	 = KEY_C,
+	[52]	 = KEY_V,
+	[53]	 = KEY_B,
+	[54]	 = KEY_N,
+	[55]	 = KEY_M,
+	[56]	 = KEY_COMMA,
+	[57]	 = KEY_DOT,
+	[58]	 = KEY_SLASH,
+	[60]	 = KEY_KPDOT,
+	[61]	 = KEY_KP7,
+	[62]	 = KEY_KP8,
+	[63]	 = KEY_KP9,
+	[64]	 = KEY_SPACE,
+	[65]	 = KEY_BACKSPACE,
+	[66]	 = KEY_TAB,
+	[67]	 = KEY_KPENTER,
+	[68]	 = KEY_ENTER,
+	[69]	 = KEY_ESC,
+	[70]	 = KEY_DELETE,
+	[74]	 = KEY_KPMINUS,
+	[76]	 = KEY_UP,
+	[77]	 = KEY_DOWN,
+	[78]	 = KEY_RIGHT,
+	[79]	 = KEY_LEFT,
+};
+
+static struct adp5588_kpad_platform_data adp5588_kpad_data = {
+	.rows		= 8,
+	.cols		= 10,
+	.keymap		= adp5588_keymap,
+	.keymapsize	= ARRAY_SIZE(adp5588_keymap),
+	.repeat		= 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_PMIC_ADP5520)
+#include <linux/mfd/adp5520.h>
+
+	/*
+	 *  ADP5520/5501 Backlight Data
+	 */
+
+static struct adp5520_backlight_platform_data adp5520_backlight_data = {
+	.fade_in		= ADP5520_FADE_T_1200ms,
+	.fade_out		= ADP5520_FADE_T_1200ms,
+	.fade_led_law		= ADP5520_BL_LAW_LINEAR,
+	.en_ambl_sens		= 1,
+	.abml_filt		= ADP5520_BL_AMBL_FILT_640ms,
+	.l1_daylight_max	= ADP5520_BL_CUR_mA(15),
+	.l1_daylight_dim	= ADP5520_BL_CUR_mA(0),
+	.l2_office_max		= ADP5520_BL_CUR_mA(7),
+	.l2_office_dim		= ADP5520_BL_CUR_mA(0),
+	.l3_dark_max		= ADP5520_BL_CUR_mA(3),
+	.l3_dark_dim		= ADP5520_BL_CUR_mA(0),
+	.l2_trip		= ADP5520_L2_COMP_CURR_uA(700),
+	.l2_hyst		= ADP5520_L2_COMP_CURR_uA(50),
+	.l3_trip		= ADP5520_L3_COMP_CURR_uA(80),
+	.l3_hyst		= ADP5520_L3_COMP_CURR_uA(20),
+};
+
+	/*
+	 *  ADP5520/5501 LEDs Data
+	 */
+
+static struct led_info adp5520_leds[] = {
+	{
+		.name = "adp5520-led1",
+		.default_trigger = "none",
+		.flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
+	},
+#ifdef ADP5520_EN_ALL_LEDS
+	{
+		.name = "adp5520-led2",
+		.default_trigger = "none",
+		.flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
+	},
+	{
+		.name = "adp5520-led3",
+		.default_trigger = "none",
+		.flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
+	},
+#endif
+};
+
+static struct adp5520_leds_platform_data adp5520_leds_data = {
+	.num_leds = ARRAY_SIZE(adp5520_leds),
+	.leds = adp5520_leds,
+	.fade_in = ADP5520_FADE_T_600ms,
+	.fade_out = ADP5520_FADE_T_600ms,
+	.led_on_time = ADP5520_LED_ONT_600ms,
+};
+
+	/*
+	 *  ADP5520 GPIO Data
+	 */
+
+static struct adp5520_gpio_platform_data adp5520_gpio_data = {
+	.gpio_start = 50,
+	.gpio_en_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
+	.gpio_pullup_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
+};
+
+	/*
+	 *  ADP5520 Keypad Data
+	 */
+
+static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
+	[ADP5520_KEY(0, 0)]	= KEY_GRAVE,
+	[ADP5520_KEY(0, 1)]	= KEY_1,
+	[ADP5520_KEY(0, 2)]	= KEY_2,
+	[ADP5520_KEY(0, 3)]	= KEY_3,
+	[ADP5520_KEY(1, 0)]	= KEY_4,
+	[ADP5520_KEY(1, 1)]	= KEY_5,
+	[ADP5520_KEY(1, 2)]	= KEY_6,
+	[ADP5520_KEY(1, 3)]	= KEY_7,
+	[ADP5520_KEY(2, 0)]	= KEY_8,
+	[ADP5520_KEY(2, 1)]	= KEY_9,
+	[ADP5520_KEY(2, 2)]	= KEY_0,
+	[ADP5520_KEY(2, 3)]	= KEY_MINUS,
+	[ADP5520_KEY(3, 0)]	= KEY_EQUAL,
+	[ADP5520_KEY(3, 1)]	= KEY_BACKSLASH,
+	[ADP5520_KEY(3, 2)]	= KEY_BACKSPACE,
+	[ADP5520_KEY(3, 3)]	= KEY_ENTER,
+};
+
+static struct adp5520_keys_platform_data adp5520_keys_data = {
+	.rows_en_mask	= ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
+	.cols_en_mask	= ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
+	.keymap		= adp5520_keymap,
+	.keymapsize	= ARRAY_SIZE(adp5520_keymap),
+	.repeat		= 0,
+};
+
+	/*
+	 *  ADP5520/5501 Multifunction Device Init Data
+	 */
+
+static struct adp5520_platform_data adp5520_pdev_data = {
+	.backlight = &adp5520_backlight_data,
+	.leds = &adp5520_leds_data,
+	.gpio = &adp5520_gpio_data,
+	.keys = &adp5520_keys_data,
+};
+
+#endif
+
+#if IS_ENABLED(CONFIG_GPIO_ADP5588)
+static struct adp5588_gpio_platform_data adp5588_gpio_data = {
+	.gpio_start = 50,
+	.pullup_dis_mask = 0,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870)
+#include <linux/platform_data/adp8870.h>
+static struct led_info adp8870_leds[] = {
+	{
+		.name = "adp8870-led7",
+		.default_trigger = "none",
+		.flags = ADP8870_LED_D7 | ADP8870_LED_OFFT_600ms,
+	},
+};
+
+
+static struct adp8870_backlight_platform_data adp8870_pdata = {
+	.bl_led_assign = ADP8870_BL_D1 | ADP8870_BL_D2 | ADP8870_BL_D3 |
+			 ADP8870_BL_D4 | ADP8870_BL_D5 | ADP8870_BL_D6,	/* 1 = Backlight 0 = Individual LED */
+	.pwm_assign = 0,				/* 1 = Enables PWM mode */
+
+	.bl_fade_in = ADP8870_FADE_T_1200ms,		/* Backlight Fade-In Timer */
+	.bl_fade_out = ADP8870_FADE_T_1200ms,		/* Backlight Fade-Out Timer */
+	.bl_fade_law = ADP8870_FADE_LAW_CUBIC1,		/* fade-on/fade-off transfer characteristic */
+
+	.en_ambl_sens = 1,				/* 1 = enable ambient light sensor */
+	.abml_filt = ADP8870_BL_AMBL_FILT_320ms,	/* Light sensor filter time */
+
+	.l1_daylight_max = ADP8870_BL_CUR_mA(20),	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l1_daylight_dim = ADP8870_BL_CUR_mA(0),	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l2_bright_max = ADP8870_BL_CUR_mA(14),		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l2_bright_dim = ADP8870_BL_CUR_mA(0),		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l3_office_max = ADP8870_BL_CUR_mA(6),		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l3_office_dim = ADP8870_BL_CUR_mA(0),		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l4_indoor_max = ADP8870_BL_CUR_mA(3),		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l4_indor_dim = ADP8870_BL_CUR_mA(0),		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l5_dark_max = ADP8870_BL_CUR_mA(2),		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l5_dark_dim = ADP8870_BL_CUR_mA(0),		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+
+	.l2_trip = ADP8870_L2_COMP_CURR_uA(710),	/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+	.l2_hyst = ADP8870_L2_COMP_CURR_uA(73),		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+	.l3_trip = ADP8870_L3_COMP_CURR_uA(389),	/* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+	.l3_hyst = ADP8870_L3_COMP_CURR_uA(54),		/* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+	.l4_trip = ADP8870_L4_COMP_CURR_uA(167),	/* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
+	.l4_hyst = ADP8870_L4_COMP_CURR_uA(16),		/* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
+	.l5_trip = ADP8870_L5_COMP_CURR_uA(43),		/* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+	.l5_hyst = ADP8870_L5_COMP_CURR_uA(11),		/* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+
+	.leds = adp8870_leds,
+	.num_leds = ARRAY_SIZE(adp8870_leds),
+	.led_fade_law = ADP8870_FADE_LAW_SQUARE,	/* fade-on/fade-off transfer characteristic */
+	.led_fade_in = ADP8870_FADE_T_600ms,
+	.led_fade_out = ADP8870_FADE_T_600ms,
+	.led_on_time = ADP8870_LED_ONT_200ms,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860)
+#include <linux/platform_data/adp8860.h>
+static struct led_info adp8860_leds[] = {
+	{
+		.name = "adp8860-led7",
+		.default_trigger = "none",
+		.flags = ADP8860_LED_D7 | ADP8860_LED_OFFT_600ms,
+	},
+};
+
+static struct adp8860_backlight_platform_data adp8860_pdata = {
+	.bl_led_assign = ADP8860_BL_D1 | ADP8860_BL_D2 | ADP8860_BL_D3 |
+			 ADP8860_BL_D4 | ADP8860_BL_D5 | ADP8860_BL_D6,	/* 1 = Backlight 0 = Individual LED */
+
+	.bl_fade_in = ADP8860_FADE_T_1200ms,		/* Backlight Fade-In Timer */
+	.bl_fade_out = ADP8860_FADE_T_1200ms,		/* Backlight Fade-Out Timer */
+	.bl_fade_law = ADP8860_FADE_LAW_CUBIC1,		/* fade-on/fade-off transfer characteristic */
+
+	.en_ambl_sens = 1,				/* 1 = enable ambient light sensor */
+	.abml_filt = ADP8860_BL_AMBL_FILT_320ms,	/* Light sensor filter time */
+
+	.l1_daylight_max = ADP8860_BL_CUR_mA(20),	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l1_daylight_dim = ADP8860_BL_CUR_mA(0),	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l2_office_max = ADP8860_BL_CUR_mA(6),		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l2_office_dim = ADP8860_BL_CUR_mA(0),		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l3_dark_max = ADP8860_BL_CUR_mA(2),		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l3_dark_dim = ADP8860_BL_CUR_mA(0),		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+
+	.l2_trip = ADP8860_L2_COMP_CURR_uA(710),	/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+	.l2_hyst = ADP8860_L2_COMP_CURR_uA(73),		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+	.l3_trip = ADP8860_L3_COMP_CURR_uA(43),		/* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+	.l3_hyst = ADP8860_L3_COMP_CURR_uA(11),		/* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+
+	.leds = adp8860_leds,
+	.num_leds = ARRAY_SIZE(adp8860_leds),
+	.led_fade_law = ADP8860_FADE_LAW_SQUARE,	/* fade-on/fade-off transfer characteristic */
+	.led_fade_in = ADP8860_FADE_T_600ms,
+	.led_fade_out = ADP8860_FADE_T_600ms,
+	.led_on_time = ADP8860_LED_ONT_200ms,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_REGULATOR_AD5398)
+static struct regulator_consumer_supply ad5398_consumer = {
+	.supply = "current",
+};
+
+static struct regulator_init_data ad5398_regulator_data = {
+	.constraints = {
+		.name = "current range",
+		.max_uA = 120000,
+		.valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = 1,
+	.consumer_supplies     = &ad5398_consumer,
+};
+
+#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER)
+static struct platform_device ad5398_virt_consumer_device = {
+	.name = "reg-virt-consumer",
+	.id = 0,
+	.dev = {
+		.platform_data = "current", /* Passed to driver */
+	},
+};
+#endif
+#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
+static struct regulator_bulk_data ad5398_bulk_data = {
+	.supply = "current",
+};
+
+static struct regulator_userspace_consumer_data ad5398_userspace_comsumer_data = {
+	.name = "ad5398",
+	.num_supplies = 1,
+	.supplies = &ad5398_bulk_data,
+};
+
+static struct platform_device ad5398_userspace_consumer_device = {
+	.name = "reg-userspace-consumer",
+	.id = 0,
+	.dev = {
+		.platform_data = &ad5398_userspace_comsumer_data,
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_ADT7410)
+/* INT bound temperature alarm event. line 1 */
+static unsigned long adt7410_platform_data[2] = {
+	IRQ_PG4, IRQF_TRIGGER_LOW,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_ADT7316_I2C)
+/* INT bound temperature alarm event. line 1 */
+static unsigned long adt7316_i2c_data[2] = {
+	IRQF_TRIGGER_LOW, /* interrupt flags */
+	GPIO_PF4, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
+};
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#ifdef CONFIG_SND_SOC_AD193X_I2C
+	{
+		I2C_BOARD_INFO("ad1937", 0x04),
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X)
+	{
+		I2C_BOARD_INFO("adav803", 0x10),
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C)
+	{
+		I2C_BOARD_INFO("ad7142_captouch", 0x2C),
+		.irq = IRQ_PG5,
+		.platform_data = (void *)&ad7142_i2c_platform_data,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_AD7150)
+	{
+		I2C_BOARD_INFO("ad7150", 0x48),
+		.irq = IRQ_PG5, /* fixme: use real interrupt number */
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_AD7152)
+	{
+		I2C_BOARD_INFO("ad7152", 0x48),
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_AD774X)
+	{
+		I2C_BOARD_INFO("ad774x", 0x48),
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_ADE7854_I2C)
+	{
+		I2C_BOARD_INFO("ade7854", 0x38),
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SENSORS_LM75)
+	{
+		I2C_BOARD_INFO("adt75", 0x9),
+		.irq = IRQ_PG5,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_ADT7410)
+	{
+		I2C_BOARD_INFO("adt7410", 0x48),
+		/* CT critical temperature event. line 0 */
+		.irq = IRQ_PG5,
+		.platform_data = (void *)&adt7410_platform_data,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_AD7291)
+	{
+		I2C_BOARD_INFO("ad7291", 0x20),
+		.irq = IRQ_PG5,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_ADT7316_I2C)
+	{
+		I2C_BOARD_INFO("adt7316", 0x48),
+		.irq = IRQ_PG6,
+		.platform_data = (void *)&adt7316_i2c_data,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+	},
+#endif
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.irq = IRQ_PG6,
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
+	{
+		I2C_BOARD_INFO("ad7879", 0x2F),
+		.irq = IRQ_PG5,
+		.platform_data = (void *)&bfin_ad7879_ts_info,
+	},
+#endif
+#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588)
+	{
+		I2C_BOARD_INFO("adp5588-keys", 0x34),
+		.irq = IRQ_PG0,
+		.platform_data = (void *)&adp5588_kpad_data,
+	},
+#endif
+#if IS_ENABLED(CONFIG_PMIC_ADP5520)
+	{
+		I2C_BOARD_INFO("pmic-adp5520", 0x32),
+		.irq = IRQ_PG0,
+		.platform_data = (void *)&adp5520_pdev_data,
+	},
+#endif
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
+	{
+		I2C_BOARD_INFO("adxl34x", 0x53),
+		.irq = IRQ_PG3,
+		.platform_data = (void *)&adxl34x_info,
+	},
+#endif
+#if IS_ENABLED(CONFIG_GPIO_ADP5588)
+	{
+		I2C_BOARD_INFO("adp5588-gpio", 0x34),
+		.platform_data = (void *)&adp5588_gpio_data,
+	},
+#endif
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
+	{
+		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+	},
+#endif
+#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
+	{
+		I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F),
+	},
+#endif
+#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870)
+	{
+		I2C_BOARD_INFO("adp8870", 0x2B),
+		.platform_data = (void *)&adp8870_pdata,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1371)
+	{
+		I2C_BOARD_INFO("adau1371", 0x1A),
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761)
+	{
+		I2C_BOARD_INFO("adau1761", 0x38),
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1361)
+	{
+		I2C_BOARD_INFO("adau1361", 0x38),
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1701)
+	{
+		I2C_BOARD_INFO("adau1701", 0x34),
+	},
+#endif
+#if IS_ENABLED(CONFIG_AD525X_DPOT)
+	{
+		I2C_BOARD_INFO("ad5258", 0x18),
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
+	{
+		I2C_BOARD_INFO("ssm2602", 0x1b),
+	},
+#endif
+#if IS_ENABLED(CONFIG_REGULATOR_AD5398)
+	{
+		I2C_BOARD_INFO("ad5398", 0xC),
+		.platform_data = (void *)&ad5398_regulator_data,
+	},
+#endif
+#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860)
+	{
+		I2C_BOARD_INFO("adp8860", 0x2A),
+		.platform_data = (void *)&adp8860_pdata,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373)
+	{
+		I2C_BOARD_INFO("adau1373", 0x1A),
+	},
+#endif
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
+	{
+		I2C_BOARD_INFO("ad5252", 0x2e),
+	},
+#endif
+};
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \
+|| IS_ENABLED(CONFIG_BFIN_SPORT)
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+#endif
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+#if IS_ENABLED(CONFIG_BFIN_SPORT)
+static struct resource bfin_sport0_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_TX,
+		.end = IRQ_SPORT0_TX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_SPORT0_TX,
+		.end = CH_SPORT0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_SPORT0_RX,
+		.end = CH_SPORT0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sport0_device = {
+	.name = "bfin_sport_raw",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_resources),
+	.resource = bfin_sport0_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
+#define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
+/* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
+
+#ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
+#define PATA_INT	IRQ_PF5
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 1,
+};
+
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x20314020,
+		.end = 0x2031403F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2031401C,
+		.end = 0x2031401F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = PATA_INT,
+		.end = PATA_INT,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+#elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 0,
+};
+/* CompactFlash Storage Card Memory Mapped Addressing
+ * /REG = A11 = 1
+ */
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x20211800,
+		.end = 0x20211807,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2021180E,	/* Device Ctl */
+		.end = 0x2021180E,
+		.flags = IORESOURCE_MEM,
+	},
+};
+#endif
+
+static struct platform_device bfin_pata_device = {
+	.name = "pata_platform",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pata_resources),
+	.resource = bfin_pata_resources,
+	.dev = {
+		.platform_data = &bfin_pata_platform_data,
+	}
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 500000000),
+	VRPAIR(VLEV_125, 533000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \
+	IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+
+#define SPORT_REQ(x) \
+	[x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
+		P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
+
+static const u16 bfin_snd_pin[][7] = {
+	SPORT_REQ(0),
+	SPORT_REQ(1),
+};
+
+static struct bfin_snd_platform_data bfin_snd_data[] = {
+	{
+		.pin_req = &bfin_snd_pin[0][0],
+	},
+	{
+		.pin_req = &bfin_snd_pin[1][0],
+	},
+};
+
+#define BFIN_SND_RES(x) \
+	[x] = { \
+		{ \
+			.start = SPORT##x##_TCR1, \
+			.end = SPORT##x##_TCR1, \
+			.flags = IORESOURCE_MEM \
+		}, \
+		{ \
+			.start = CH_SPORT##x##_RX, \
+			.end = CH_SPORT##x##_RX, \
+			.flags = IORESOURCE_DMA, \
+		}, \
+		{ \
+			.start = CH_SPORT##x##_TX, \
+			.end = CH_SPORT##x##_TX, \
+			.flags = IORESOURCE_DMA, \
+		}, \
+		{ \
+			.start = IRQ_SPORT##x##_ERROR, \
+			.end = IRQ_SPORT##x##_ERROR, \
+			.flags = IORESOURCE_IRQ, \
+		} \
+	}
+
+static struct resource bfin_snd_resources[][4] = {
+	BFIN_SND_RES(0),
+	BFIN_SND_RES(1),
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+static struct platform_device bfin_i2s_pcm = {
+	.name = "bfin-i2s-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+static struct platform_device bfin_ac97_pcm = {
+	.name = "bfin-ac97-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+static const char * const ad1836_link[] = {
+	"bfin-i2s.0",
+	"spi0.4",
+};
+static struct platform_device bfin_ad1836_machine = {
+	.name = "bfin-snd-ad1836",
+	.id = -1,
+	.dev = {
+		.platform_data = (void *)ad1836_link,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
+static const unsigned ad73311_gpio[] = {
+	GPIO_PF4,
+};
+
+static struct platform_device bfin_ad73311_machine = {
+	.name = "bfin-snd-ad73311",
+	.id = 1,
+	.dev = {
+		.platform_data = (void *)ad73311_gpio,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
+static struct platform_device bfin_ad73311_codec_device = {
+	.name = "ad73311",
+	.id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X)
+static struct platform_device bfin_eval_adav801_device = {
+	.name = "bfin-eval-adav801",
+	.id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	.num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+	.dev = {
+		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
+static struct platform_device bfin_ac97 = {
+	.name = "bfin-ac97",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	.num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+	.dev = {
+		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE)
+#define REGULATOR_ADP122	"adp122"
+#define REGULATOR_ADP122_UV	2500000
+
+static struct regulator_consumer_supply adp122_consumers = {
+		.supply = REGULATOR_ADP122,
+};
+
+static struct regulator_init_data adp_switch_regulator_data = {
+	.constraints = {
+		.name = REGULATOR_ADP122,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		.min_uV = REGULATOR_ADP122_UV,
+		.max_uV = REGULATOR_ADP122_UV,
+		.min_uA = 0,
+		.max_uA = 300000,
+	},
+	.num_consumer_supplies = 1,	/* only 1 */
+	.consumer_supplies     = &adp122_consumers,
+};
+
+static struct fixed_voltage_config adp_switch_pdata = {
+	.supply_name = REGULATOR_ADP122,
+	.microvolts = REGULATOR_ADP122_UV,
+	.gpio = GPIO_PF2,
+	.enable_high = 1,
+	.enabled_at_boot = 0,
+	.init_data = &adp_switch_regulator_data,
+};
+
+static struct platform_device adp_switch_device = {
+	.name = "reg-fixed-voltage",
+	.id = 0,
+	.dev = {
+		.platform_data = &adp_switch_pdata,
+	},
+};
+
+#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
+static struct regulator_bulk_data adp122_bulk_data = {
+	.supply = REGULATOR_ADP122,
+};
+
+static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = {
+	.name = REGULATOR_ADP122,
+	.num_supplies = 1,
+	.supplies = &adp122_bulk_data,
+};
+
+static struct platform_device adp122_userspace_consumer_device = {
+	.name = "reg-userspace-consumer",
+	.id = 0,
+	.dev = {
+		.platform_data = &adp122_userspace_comsumer_data,
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER)
+
+static struct resource iio_gpio_trigger_resources[] = {
+	[0] = {
+		.start  = IRQ_PF5,
+		.end    = IRQ_PF5,
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device iio_gpio_trigger = {
+	.name = "iio_gpio_trigger",
+	.num_resources = ARRAY_SIZE(iio_gpio_trigger_resources),
+	.resource = iio_gpio_trigger_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373)
+static struct platform_device bf5xx_adau1373_device = {
+	.name = "bfin-eval-adau1373",
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701)
+static struct platform_device bf5xx_adau1701_device = {
+	.name = "bfin-eval-adau1701",
+};
+#endif
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+#if IS_ENABLED(CONFIG_BFIN_SPORT)
+	&bfin_sport0_device,
+#endif
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
+	&bfin_pcmcia_cf_device,
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_SL811_HCD)
+	&sl811_hcd_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+	&isp1362_hcd_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
+	&bfin_isp1760_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	&smc91x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_DM9000)
+	&dm9000_device,
+#endif
+
+#if IS_ENABLED(CONFIG_CAN_BFIN)
+	&bfin_can_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	&net2272_bfin_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
+	&bfin_sport_spi0_device,
+	&bfin_sport_spi1_device,
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
+	&bfin_fb_device,
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+	&bfin_lq035q1_device,
+#endif
+
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
+	&bfin_capture_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
+	&bfin_pata_device,
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+	&bfin_device_gpiokeys,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
+	&bfin_async_nand_device,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+	&stamp_flash_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+	&bfin_i2s_pcm,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+	&bfin_ac97_pcm,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+	&bfin_ad1836_machine,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
+	&bfin_ad73311_machine,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
+	&bfin_ad73311_codec_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
+	&bfin_i2s,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
+	&bfin_ac97,
+#endif
+
+#if IS_ENABLED(CONFIG_REGULATOR_AD5398)
+#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER)
+	&ad5398_virt_consumer_device,
+#endif
+#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
+	&ad5398_userspace_consumer_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE)
+	&adp_switch_device,
+#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
+	&adp122_userspace_consumer_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER)
+	&iio_gpio_trigger,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373)
+	&bf5xx_adau1373_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701)
+	&bf5xx_adau1701_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X)
+	&bfin_eval_adav801_device,
+#endif
+};
+
+static int __init net2272_init(void)
+{
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	int ret;
+
+	ret = gpio_request(GPIO_PF6, "net2272");
+	if (ret)
+		return ret;
+
+	/* Reset the USB chip */
+	gpio_direction_output(GPIO_PF6, 0);
+	mdelay(2);
+	gpio_set_value(GPIO_PF6, 1);
+#endif
+
+	return 0;
+}
+
+static int __init stamp_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	bfin_plat_nand_init();
+	adf702x_mac_init();
+	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
+	if (net2272_init())
+		pr_warning("unable to configure net2272; it probably won't work\n");
+
+	return 0;
+}
+
+arch_initcall(stamp_init);
+
+
+static struct platform_device *stamp_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(stamp_early_devices,
+		ARRAY_SIZE(stamp_early_devices));
+}
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
+}
+
+/*
+ * Currently the MAC address is saved in Flash by U-Boot
+ */
+#define FLASH_MAC	0x203f0000
+int bfin_get_ether_addr(char *addr)
+{
+	*(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
+	*(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
+	return 0;
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/tcm_bf537.c
new file mode 100644
index 0000000..ed309c9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -0,0 +1,792 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/spi/mmc_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix TCM BF537";
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* all SPI peripherals info goes here */
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00020000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = 0x20000
+	}, {
+		.name = "file system(spi)",
+		.size = 0x700000,
+		.offset = 0x00100000,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
+static struct platform_device hitachi_fb_device = {
+	.name = "hitachi-tx09",
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.start = 0x20200300,
+		.end = 0x20200300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF14,
+		.end = IRQ_PF14,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20308000,
+		.end = 0x20308000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20308004,
+		.end = 0x20308004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PG15,
+		.end = IRQ_PG15,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PG13,
+		.end = IRQ_PG13,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
+static struct mtd_partition cm_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0x100000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data cm_flash_data = {
+	.width    = 2,
+	.parts    = cm_partitions,
+	.nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PF4, GPIO_PF5 };
+
+static struct resource cm_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)cm_flash_gpios,
+		.end   = ARRAY_SIZE(cm_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device cm_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &cm_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(cm_flash_resource),
+	.resource      = cm_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_MII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
+};
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
+#define PATA_INT	IRQ_PF14
+
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 2,
+};
+
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x2030C000,
+		.end = 0x2030C01F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2030D018,
+		.end = 0x2030D01B,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = PATA_INT,
+		.end = PATA_INT,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device bfin_pata_device = {
+	.name = "pata_platform",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pata_resources),
+	.resource = bfin_pata_resources,
+	.dev = {
+		.platform_data = &bfin_pata_platform_data,
+	}
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 500000000),
+	VRPAIR(VLEV_125, 533000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *cm_bf537_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
+	&hitachi_fb_device,
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+	&isp1362_hcd_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	&smc91x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	&net2272_bfin_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
+	&bfin_pata_device,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
+	&cm_flash_device,
+#endif
+};
+
+static int __init net2272_init(void)
+{
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	int ret;
+
+	ret = gpio_request(GPIO_PG14, "net2272");
+	if (ret)
+		return ret;
+
+	/* Reset USB Chip, PG14 */
+	gpio_direction_output(GPIO_PG14, 0);
+	mdelay(2);
+	gpio_set_value(GPIO_PG14, 1);
+#endif
+
+	return 0;
+}
+
+static int __init tcm_bf537_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
+	irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
+#endif
+
+	if (net2272_init())
+		pr_warning("unable to configure net2272; it probably won't work\n");
+
+	return 0;
+}
+
+arch_initcall(tcm_bf537_init);
+
+static struct platform_device *cm_bf537_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf537_early_devices,
+		ARRAY_SIZE(cm_bf537_early_devices));
+}
+
+int bfin_get_ether_addr(char *addr)
+{
+	return 1;
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/dma.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/dma.c
new file mode 100644
index 0000000..5c62e99
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/dma.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ * This file contains the simple DMA Implementation for Blackfin
+ */
+
+#include <linux/module.h>
+
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS] = {
+	(struct dma_register *) DMA0_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_NEXT_DESC_PTR,
+	(struct dma_register *) DMA3_NEXT_DESC_PTR,
+	(struct dma_register *) DMA4_NEXT_DESC_PTR,
+	(struct dma_register *) DMA5_NEXT_DESC_PTR,
+	(struct dma_register *) DMA6_NEXT_DESC_PTR,
+	(struct dma_register *) DMA7_NEXT_DESC_PTR,
+	(struct dma_register *) DMA8_NEXT_DESC_PTR,
+	(struct dma_register *) DMA9_NEXT_DESC_PTR,
+	(struct dma_register *) DMA10_NEXT_DESC_PTR,
+	(struct dma_register *) DMA11_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+};
+EXPORT_SYMBOL(dma_io_base_addr);
+
+int channel2irq(unsigned int channel)
+{
+	int ret_irq = -1;
+
+	switch (channel) {
+	case CH_PPI:
+		ret_irq = IRQ_PPI;
+		break;
+
+	case CH_EMAC_RX:
+		ret_irq = IRQ_MAC_RX;
+		break;
+
+	case CH_EMAC_TX:
+		ret_irq = IRQ_MAC_TX;
+		break;
+
+	case CH_UART1_RX:
+		ret_irq = IRQ_UART1_RX;
+		break;
+
+	case CH_UART1_TX:
+		ret_irq = IRQ_UART1_TX;
+		break;
+
+	case CH_SPORT0_RX:
+		ret_irq = IRQ_SPORT0_RX;
+		break;
+
+	case CH_SPORT0_TX:
+		ret_irq = IRQ_SPORT0_TX;
+		break;
+
+	case CH_SPORT1_RX:
+		ret_irq = IRQ_SPORT1_RX;
+		break;
+
+	case CH_SPORT1_TX:
+		ret_irq = IRQ_SPORT1_TX;
+		break;
+
+	case CH_SPI:
+		ret_irq = IRQ_SPI;
+		break;
+
+	case CH_UART0_RX:
+		ret_irq = IRQ_UART0_RX;
+		break;
+
+	case CH_UART0_TX:
+		ret_irq = IRQ_UART0_TX;
+		break;
+
+	case CH_MEM_STREAM0_SRC:
+	case CH_MEM_STREAM0_DEST:
+		ret_irq = IRQ_MEM_DMA0;
+		break;
+
+	case CH_MEM_STREAM1_SRC:
+	case CH_MEM_STREAM1_DEST:
+		ret_irq = IRQ_MEM_DMA1;
+		break;
+	}
+	return ret_irq;
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/anomaly.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/anomaly.h
new file mode 100644
index 0000000..2bc70c5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -0,0 +1,241 @@
+/*
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
+ *
+ * Copyright 2004-2011 Analog Devices Inc.
+ * Licensed under the Clear BSD license.
+ */
+
+/* This file should be up to date with:
+ *  - Revision F, 05/23/2011; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* We do not support 0.1 silicon - sorry */
+#if __SILICON_REVISION__ < 2
+# error will not work on BF537 silicon version 0.0 or 0.1
+#endif
+
+#if defined(__ADSPBF534__)
+# define ANOMALY_BF534 1
+#else
+# define ANOMALY_BF534 0
+#endif
+#if defined(__ADSPBF536__)
+# define ANOMALY_BF536 1
+#else
+# define ANOMALY_BF536 0
+#endif
+#if defined(__ADSPBF537__)
+# define ANOMALY_BF537 1
+#else
+# define ANOMALY_BF537 0
+#endif
+
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
+#define ANOMALY_05000180 (1)
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
+#define ANOMALY_05000250 (__SILICON_REVISION__ < 3)
+/* EMAC TX DMA Error After an Early Frame Abort */
+#define ANOMALY_05000252 (__SILICON_REVISION__ < 3)
+/* Maximum External Clock Speed for Timers */
+#define ANOMALY_05000253 (__SILICON_REVISION__ < 3)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (__SILICON_REVISION__ > 2)
+/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
+#define ANOMALY_05000255 (__SILICON_REVISION__ < 3)
+/* EMAC MDIO Input Latched on Wrong MDC Edge */
+#define ANOMALY_05000256 (__SILICON_REVISION__ < 3)
+/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
+#define ANOMALY_05000257 (__SILICON_REVISION__ < 3)
+/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */
+#define ANOMALY_05000258 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ == 1) || __SILICON_REVISION__ == 2)
+/* ICPLB_STATUS MMR Register May Be Corrupted */
+#define ANOMALY_05000260 (__SILICON_REVISION__ == 2)
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 3)
+/* Stores To Data Cache May Be Lost */
+#define ANOMALY_05000262 (__SILICON_REVISION__ < 3)
+/* Hardware Loop Corrupted When Taking an ICPLB Exception */
+#define ANOMALY_05000263 (__SILICON_REVISION__ == 2)
+/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
+#define ANOMALY_05000264 (__SILICON_REVISION__ < 3)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (1)
+/* Memory DMA Error when Peripheral DMA Is Running with Non-Zero DEB_TRAFFIC_PERIOD */
+#define ANOMALY_05000268 (__SILICON_REVISION__ < 3)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
+#define ANOMALY_05000270 (__SILICON_REVISION__ < 3)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* Writes to Synchronous SDRAM Memory May Be Lost */
+#define ANOMALY_05000273 (__SILICON_REVISION__ < 3)
+/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
+#define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
+#define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2))
+/* SPI Master Boot Mode Does Not Work Well with Atmel Data Flash Devices */
+#define ANOMALY_05000280 (1)
+/* False Hardware Error when ISR Context Is Not Restored */
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 3)
+/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
+#define ANOMALY_05000282 (__SILICON_REVISION__ < 3)
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
+#define ANOMALY_05000283 (__SILICON_REVISION__ < 3)
+/* TXDWA Bit in EMAC_SYSCTL Register Is Not Functional */
+#define ANOMALY_05000285 (__SILICON_REVISION__ < 3)
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 3)
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
+#define ANOMALY_05000301 (1)
+/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
+#define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
+#define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
+/* Writing UART_THR While UART Clock Is Disabled Sends Erroneous Start Bit */
+#define ANOMALY_05000309 (__SILICON_REVISION__ < 3)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
+#define ANOMALY_05000313 (1)
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
+#define ANOMALY_05000315 (__SILICON_REVISION__ < 3)
+/* EMAC RMII Mode: Collisions Occur in Full Duplex Mode */
+#define ANOMALY_05000316 (__SILICON_REVISION__ < 3)
+/* EMAC RMII Mode: TX Frames in Half Duplex Fail with Status "No Carrier" */
+#define ANOMALY_05000321 (__SILICON_REVISION__ < 3)
+/* EMAC RMII Mode at 10-Base-T Speed: RX Frames Not Received Properly */
+#define ANOMALY_05000322 (1)
+/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
+#define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
+/* UART Gets Disabled after UART Boot */
+#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3)
+/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
+#define ANOMALY_05000355 (1)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */
+#define ANOMALY_05000359 (1)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 2)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI Points to Invalid Memory */
+#define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
+/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */
+#define ANOMALY_05000473 (1)
+/* Possible Lockup Condition when Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
+/* Multiple Simultaneous Urgent DMA Requests May Cause DMA System Instability */
+#define ANOMALY_05000480 (__SILICON_REVISION__ < 3)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* PLL May Latch Incorrect Values Coming Out of Reset */
+#define ANOMALY_05000489 (1)
+/* Instruction Memory Stalls Can Cause IFLUSH to Fail */
+#define ANOMALY_05000491 (1)
+/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */
+#define ANOMALY_05000494 (1)
+/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */
+#define ANOMALY_05000501 (1)
+
+/*
+ * These anomalies have been "phased" out of analog.com anomaly sheets and are
+ * here to show running on older silicon just isn't feasible.
+ */
+
+/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */
+#define ANOMALY_05000157 (__SILICON_REVISION__ < 2)
+/* Instruction Cache Is Not Functional */
+#define ANOMALY_05000237 (__SILICON_REVISION__ < 2)
+/* Buffered CLKIN Output Is Disabled by Default */
+#define ANOMALY_05000247 (__SILICON_REVISION__ < 2)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
+#define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
+#define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000219 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
+#define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
+#define ANOMALY_05000242 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000311 (0)
+#define ANOMALY_05000323 (0)
+#define ANOMALY_05000353 (1)
+#define ANOMALY_05000362 (1)
+#define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
+#define ANOMALY_05000380 (0)
+#define ANOMALY_05000383 (0)
+#define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
+#define ANOMALY_05000412 (0)
+#define ANOMALY_05000430 (0)
+#define ANOMALY_05000432 (0)
+#define ANOMALY_05000435 (0)
+#define ANOMALY_05000440 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000485 (0)
+#define ANOMALY_16000030 (0)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/bf537.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/bf537.h
new file mode 100644
index 0000000..8b29141
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/bf537.h
@@ -0,0 +1,108 @@
+/*
+ * System MMR Register and memory map for ADSP-BF537
+ *
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __MACH_BF537_H__
+#define __MACH_BF537_H__
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15		0x8000
+#define IMASK_IVG14		0x4000
+#define IMASK_IVG13		0x2000
+#define IMASK_IVG12		0x1000
+
+#define IMASK_IVG11		0x0800
+#define IMASK_IVG10		0x0400
+#define IMASK_IVG9		0x0200
+#define IMASK_IVG8		0x0100
+
+#define IMASK_IVG7		0x0080
+#define IMASK_IVGTMR	0x0040
+#define IMASK_IVGHW		0x0020
+
+/***************************/
+
+
+#define BFIN_DSUBBANKS	4
+#define BFIN_DWAYS		2
+#define BFIN_DLINES		64
+#define BFIN_ISUBBANKS	4
+#define BFIN_IWAYS		4
+#define BFIN_ILINES		32
+
+#define WAY0_L			0x1
+#define WAY1_L			0x2
+#define WAY01_L			0x3
+#define WAY2_L			0x4
+#define WAY02_L			0x5
+#define	WAY12_L			0x6
+#define	WAY012_L		0x7
+
+#define	WAY3_L			0x8
+#define	WAY03_L			0x9
+#define	WAY13_L			0xA
+#define	WAY013_L		0xB
+
+#define	WAY32_L			0xC
+#define	WAY320_L		0xD
+#define	WAY321_L		0xE
+#define	WAYALL_L		0xF
+
+#define DMC_ENABLE (2<<2)	/*yes, 2, not 1 */
+
+/********************************* EBIU Settings ************************************/
+#define AMBCTL0VAL	((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL	((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#ifdef CONFIG_C_AMBEN_ALL
+#define V_AMBEN AMBEN_ALL
+#endif
+#ifdef CONFIG_C_AMBEN
+#define V_AMBEN 0x0
+#endif
+#ifdef CONFIG_C_AMBEN_B0
+#define V_AMBEN AMBEN_B0
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1
+#define V_AMBEN AMBEN_B0_B1
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1_B2
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+#ifdef CONFIG_C_CDPRIO
+#define V_CDPRIO 0x100
+#else
+#define V_CDPRIO 0x0
+#endif
+
+#define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO)
+
+#ifdef CONFIG_BF537
+#define CPU "BF537"
+#define CPUID 0x27c8
+#endif
+#ifdef CONFIG_BF536
+#define CPU "BF536"
+#define CPUID 0x27c8
+#endif
+#ifdef CONFIG_BF534
+#define CPU "BF534"
+#define CPUID 0x27c6
+#endif
+
+#ifndef CPU
+#error "Unknown CPU type - This kernel doesn't seem to be configured properly"
+#endif
+
+#endif				/* __MACH_BF537_H__  */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/bfin_serial.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/bfin_serial.h
new file mode 100644
index 0000000..00c603f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/bfin_serial.h
@@ -0,0 +1,14 @@
+/*
+ * mach/bfin_serial.h - Blackfin UART/Serial definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_SERIAL_H__
+#define __BFIN_MACH_SERIAL_H__
+
+#define BFIN_UART_NR_PORTS	2
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/blackfin.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/blackfin.h
new file mode 100644
index 0000000..baa096f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/blackfin.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#define BF537_FAMILY
+
+#include "bf537.h"
+#include "anomaly.h"
+
+#include <asm/def_LPBlackfin.h>
+#ifdef CONFIG_BF534
+# include "defBF534.h"
+#endif
+#if defined(CONFIG_BF537) || defined(CONFIG_BF536)
+# include "defBF537.h"
+#endif
+
+#if !defined(__ASSEMBLY__)
+# include <asm/cdef_LPBlackfin.h>
+# ifdef CONFIG_BF534
+#  include "cdefBF534.h"
+# endif
+# if defined(CONFIG_BF537) || defined(CONFIG_BF536)
+#  include "cdefBF537.h"
+# endif
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/cdefBF534.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
new file mode 100644
index 0000000..563ede9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
@@ -0,0 +1,1736 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _CDEF_BF534_H
+#define _CDEF_BF534_H
+
+/* Clock and System Control	(0xFFC00000 - 0xFFC000FF)								*/
+#define bfin_read_PLL_CTL()                  bfin_read16(PLL_CTL)
+#define bfin_read_PLL_DIV()                  bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val)              bfin_write16(PLL_DIV,val)
+#define bfin_read_VR_CTL()                   bfin_read16(VR_CTL)
+#define bfin_read_PLL_STAT()                 bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val)             bfin_write16(PLL_STAT,val)
+#define bfin_read_PLL_LOCKCNT()              bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val)          bfin_write16(PLL_LOCKCNT,val)
+#define bfin_read_CHIPID()                   bfin_read32(CHIPID)
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF)							*/
+#define bfin_read_SWRST()                    bfin_read16(SWRST)
+#define bfin_write_SWRST(val)                bfin_write16(SWRST,val)
+#define bfin_read_SYSCR()                    bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val)                bfin_write16(SYSCR,val)
+#define bfin_read_SIC_RVECT()                bfin_read32(SIC_RVECT)
+#define bfin_write_SIC_RVECT(val)            bfin_write32(SIC_RVECT,val)
+#define bfin_read_SIC_IMASK()                bfin_read32(SIC_IMASK)
+#define bfin_write_SIC_IMASK(val)            bfin_write32(SIC_IMASK,val)
+#define bfin_read_SIC_IAR0()                 bfin_read32(SIC_IAR0)
+#define bfin_write_SIC_IAR0(val)             bfin_write32(SIC_IAR0,val)
+#define bfin_read_SIC_IAR1()                 bfin_read32(SIC_IAR1)
+#define bfin_write_SIC_IAR1(val)             bfin_write32(SIC_IAR1,val)
+#define bfin_read_SIC_IAR2()                 bfin_read32(SIC_IAR2)
+#define bfin_write_SIC_IAR2(val)             bfin_write32(SIC_IAR2,val)
+#define bfin_read_SIC_IAR3()                 bfin_read32(SIC_IAR3)
+#define bfin_write_SIC_IAR3(val)             bfin_write32(SIC_IAR3,val)
+#define bfin_read_SIC_ISR()                  bfin_read32(SIC_ISR)
+#define bfin_write_SIC_ISR(val)              bfin_write32(SIC_ISR,val)
+#define bfin_read_SIC_IWR()                  bfin_read32(SIC_IWR)
+#define bfin_write_SIC_IWR(val)              bfin_write32(SIC_IWR,val)
+
+/* Watchdog Timer		(0xFFC00200 - 0xFFC002FF)									*/
+#define bfin_read_WDOG_CTL()                 bfin_read16(WDOG_CTL)
+#define bfin_write_WDOG_CTL(val)             bfin_write16(WDOG_CTL,val)
+#define bfin_read_WDOG_CNT()                 bfin_read32(WDOG_CNT)
+#define bfin_write_WDOG_CNT(val)             bfin_write32(WDOG_CNT,val)
+#define bfin_read_WDOG_STAT()                bfin_read32(WDOG_STAT)
+#define bfin_write_WDOG_STAT(val)            bfin_write32(WDOG_STAT,val)
+
+/* Real Time Clock		(0xFFC00300 - 0xFFC003FF)									*/
+#define bfin_read_RTC_STAT()                 bfin_read32(RTC_STAT)
+#define bfin_write_RTC_STAT(val)             bfin_write32(RTC_STAT,val)
+#define bfin_read_RTC_ICTL()                 bfin_read16(RTC_ICTL)
+#define bfin_write_RTC_ICTL(val)             bfin_write16(RTC_ICTL,val)
+#define bfin_read_RTC_ISTAT()                bfin_read16(RTC_ISTAT)
+#define bfin_write_RTC_ISTAT(val)            bfin_write16(RTC_ISTAT,val)
+#define bfin_read_RTC_SWCNT()                bfin_read16(RTC_SWCNT)
+#define bfin_write_RTC_SWCNT(val)            bfin_write16(RTC_SWCNT,val)
+#define bfin_read_RTC_ALARM()                bfin_read32(RTC_ALARM)
+#define bfin_write_RTC_ALARM(val)            bfin_write32(RTC_ALARM,val)
+#define bfin_read_RTC_FAST()                 bfin_read16(RTC_FAST)
+#define bfin_write_RTC_FAST(val)             bfin_write16(RTC_FAST,val)
+#define bfin_read_RTC_PREN()                 bfin_read16(RTC_PREN)
+#define bfin_write_RTC_PREN(val)             bfin_write16(RTC_PREN,val)
+
+/* UART0 Controller		(0xFFC00400 - 0xFFC004FF)									*/
+#define bfin_read_UART0_THR()                bfin_read16(UART0_THR)
+#define bfin_write_UART0_THR(val)            bfin_write16(UART0_THR,val)
+#define bfin_read_UART0_RBR()                bfin_read16(UART0_RBR)
+#define bfin_write_UART0_RBR(val)            bfin_write16(UART0_RBR,val)
+#define bfin_read_UART0_DLL()                bfin_read16(UART0_DLL)
+#define bfin_write_UART0_DLL(val)            bfin_write16(UART0_DLL,val)
+#define bfin_read_UART0_IER()                bfin_read16(UART0_IER)
+#define bfin_write_UART0_IER(val)            bfin_write16(UART0_IER,val)
+#define bfin_read_UART0_DLH()                bfin_read16(UART0_DLH)
+#define bfin_write_UART0_DLH(val)            bfin_write16(UART0_DLH,val)
+#define bfin_read_UART0_IIR()                bfin_read16(UART0_IIR)
+#define bfin_write_UART0_IIR(val)            bfin_write16(UART0_IIR,val)
+#define bfin_read_UART0_LCR()                bfin_read16(UART0_LCR)
+#define bfin_write_UART0_LCR(val)            bfin_write16(UART0_LCR,val)
+#define bfin_read_UART0_MCR()                bfin_read16(UART0_MCR)
+#define bfin_write_UART0_MCR(val)            bfin_write16(UART0_MCR,val)
+#define bfin_read_UART0_LSR()                bfin_read16(UART0_LSR)
+#define bfin_write_UART0_LSR(val)            bfin_write16(UART0_LSR,val)
+#define bfin_read_UART0_MSR()                bfin_read16(UART0_MSR)
+#define bfin_write_UART0_MSR(val)            bfin_write16(UART0_MSR,val)
+#define bfin_read_UART0_SCR()                bfin_read16(UART0_SCR)
+#define bfin_write_UART0_SCR(val)            bfin_write16(UART0_SCR,val)
+#define bfin_read_UART0_GCTL()               bfin_read16(UART0_GCTL)
+#define bfin_write_UART0_GCTL(val)           bfin_write16(UART0_GCTL,val)
+
+/* SPI Controller		(0xFFC00500 - 0xFFC005FF)									*/
+#define bfin_read_SPI_CTL()                  bfin_read16(SPI_CTL)
+#define bfin_write_SPI_CTL(val)              bfin_write16(SPI_CTL,val)
+#define bfin_read_SPI_FLG()                  bfin_read16(SPI_FLG)
+#define bfin_write_SPI_FLG(val)              bfin_write16(SPI_FLG,val)
+#define bfin_read_SPI_STAT()                 bfin_read16(SPI_STAT)
+#define bfin_write_SPI_STAT(val)             bfin_write16(SPI_STAT,val)
+#define bfin_read_SPI_TDBR()                 bfin_read16(SPI_TDBR)
+#define bfin_write_SPI_TDBR(val)             bfin_write16(SPI_TDBR,val)
+#define bfin_read_SPI_RDBR()                 bfin_read16(SPI_RDBR)
+#define bfin_write_SPI_RDBR(val)             bfin_write16(SPI_RDBR,val)
+#define bfin_read_SPI_BAUD()                 bfin_read16(SPI_BAUD)
+#define bfin_write_SPI_BAUD(val)             bfin_write16(SPI_BAUD,val)
+#define bfin_read_SPI_SHADOW()               bfin_read16(SPI_SHADOW)
+#define bfin_write_SPI_SHADOW(val)           bfin_write16(SPI_SHADOW,val)
+
+/* TIMER0-7 Registers		(0xFFC00600 - 0xFFC006FF)								*/
+#define bfin_read_TIMER0_CONFIG()            bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val)        bfin_write16(TIMER0_CONFIG,val)
+#define bfin_read_TIMER0_COUNTER()           bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val)       bfin_write32(TIMER0_COUNTER,val)
+#define bfin_read_TIMER0_PERIOD()            bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val)        bfin_write32(TIMER0_PERIOD,val)
+#define bfin_read_TIMER0_WIDTH()             bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val)         bfin_write32(TIMER0_WIDTH,val)
+
+#define bfin_read_TIMER1_CONFIG()            bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val)        bfin_write16(TIMER1_CONFIG,val)
+#define bfin_read_TIMER1_COUNTER()           bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val)       bfin_write32(TIMER1_COUNTER,val)
+#define bfin_read_TIMER1_PERIOD()            bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val)        bfin_write32(TIMER1_PERIOD,val)
+#define bfin_read_TIMER1_WIDTH()             bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val)         bfin_write32(TIMER1_WIDTH,val)
+
+#define bfin_read_TIMER2_CONFIG()            bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val)        bfin_write16(TIMER2_CONFIG,val)
+#define bfin_read_TIMER2_COUNTER()           bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val)       bfin_write32(TIMER2_COUNTER,val)
+#define bfin_read_TIMER2_PERIOD()            bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val)        bfin_write32(TIMER2_PERIOD,val)
+#define bfin_read_TIMER2_WIDTH()             bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val)         bfin_write32(TIMER2_WIDTH,val)
+
+#define bfin_read_TIMER3_CONFIG()            bfin_read16(TIMER3_CONFIG)
+#define bfin_write_TIMER3_CONFIG(val)        bfin_write16(TIMER3_CONFIG,val)
+#define bfin_read_TIMER3_COUNTER()           bfin_read32(TIMER3_COUNTER)
+#define bfin_write_TIMER3_COUNTER(val)       bfin_write32(TIMER3_COUNTER,val)
+#define bfin_read_TIMER3_PERIOD()            bfin_read32(TIMER3_PERIOD)
+#define bfin_write_TIMER3_PERIOD(val)        bfin_write32(TIMER3_PERIOD,val)
+#define bfin_read_TIMER3_WIDTH()             bfin_read32(TIMER3_WIDTH)
+#define bfin_write_TIMER3_WIDTH(val)         bfin_write32(TIMER3_WIDTH,val)
+
+#define bfin_read_TIMER4_CONFIG()            bfin_read16(TIMER4_CONFIG)
+#define bfin_write_TIMER4_CONFIG(val)        bfin_write16(TIMER4_CONFIG,val)
+#define bfin_read_TIMER4_COUNTER()           bfin_read32(TIMER4_COUNTER)
+#define bfin_write_TIMER4_COUNTER(val)       bfin_write32(TIMER4_COUNTER,val)
+#define bfin_read_TIMER4_PERIOD()            bfin_read32(TIMER4_PERIOD)
+#define bfin_write_TIMER4_PERIOD(val)        bfin_write32(TIMER4_PERIOD,val)
+#define bfin_read_TIMER4_WIDTH()             bfin_read32(TIMER4_WIDTH)
+#define bfin_write_TIMER4_WIDTH(val)         bfin_write32(TIMER4_WIDTH,val)
+
+#define bfin_read_TIMER5_CONFIG()            bfin_read16(TIMER5_CONFIG)
+#define bfin_write_TIMER5_CONFIG(val)        bfin_write16(TIMER5_CONFIG,val)
+#define bfin_read_TIMER5_COUNTER()           bfin_read32(TIMER5_COUNTER)
+#define bfin_write_TIMER5_COUNTER(val)       bfin_write32(TIMER5_COUNTER,val)
+#define bfin_read_TIMER5_PERIOD()            bfin_read32(TIMER5_PERIOD)
+#define bfin_write_TIMER5_PERIOD(val)        bfin_write32(TIMER5_PERIOD,val)
+#define bfin_read_TIMER5_WIDTH()             bfin_read32(TIMER5_WIDTH)
+#define bfin_write_TIMER5_WIDTH(val)         bfin_write32(TIMER5_WIDTH,val)
+
+#define bfin_read_TIMER6_CONFIG()            bfin_read16(TIMER6_CONFIG)
+#define bfin_write_TIMER6_CONFIG(val)        bfin_write16(TIMER6_CONFIG,val)
+#define bfin_read_TIMER6_COUNTER()           bfin_read32(TIMER6_COUNTER)
+#define bfin_write_TIMER6_COUNTER(val)       bfin_write32(TIMER6_COUNTER,val)
+#define bfin_read_TIMER6_PERIOD()            bfin_read32(TIMER6_PERIOD)
+#define bfin_write_TIMER6_PERIOD(val)        bfin_write32(TIMER6_PERIOD,val)
+#define bfin_read_TIMER6_WIDTH()             bfin_read32(TIMER6_WIDTH)
+#define bfin_write_TIMER6_WIDTH(val)         bfin_write32(TIMER6_WIDTH,val)
+
+#define bfin_read_TIMER7_CONFIG()            bfin_read16(TIMER7_CONFIG)
+#define bfin_write_TIMER7_CONFIG(val)        bfin_write16(TIMER7_CONFIG,val)
+#define bfin_read_TIMER7_COUNTER()           bfin_read32(TIMER7_COUNTER)
+#define bfin_write_TIMER7_COUNTER(val)       bfin_write32(TIMER7_COUNTER,val)
+#define bfin_read_TIMER7_PERIOD()            bfin_read32(TIMER7_PERIOD)
+#define bfin_write_TIMER7_PERIOD(val)        bfin_write32(TIMER7_PERIOD,val)
+#define bfin_read_TIMER7_WIDTH()             bfin_read32(TIMER7_WIDTH)
+#define bfin_write_TIMER7_WIDTH(val)         bfin_write32(TIMER7_WIDTH,val)
+
+#define bfin_read_TIMER_ENABLE()             bfin_read16(TIMER_ENABLE)
+#define bfin_write_TIMER_ENABLE(val)         bfin_write16(TIMER_ENABLE,val)
+#define bfin_read_TIMER_DISABLE()            bfin_read16(TIMER_DISABLE)
+#define bfin_write_TIMER_DISABLE(val)        bfin_write16(TIMER_DISABLE,val)
+#define bfin_read_TIMER_STATUS()             bfin_read32(TIMER_STATUS)
+#define bfin_write_TIMER_STATUS(val)         bfin_write32(TIMER_STATUS,val)
+
+/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF)								*/
+#define bfin_read_PORTFIO()                  bfin_read16(PORTFIO)
+#define bfin_write_PORTFIO(val)              bfin_write16(PORTFIO,val)
+#define bfin_read_PORTFIO_CLEAR()            bfin_read16(PORTFIO_CLEAR)
+#define bfin_write_PORTFIO_CLEAR(val)        bfin_write16(PORTFIO_CLEAR,val)
+#define bfin_read_PORTFIO_SET()              bfin_read16(PORTFIO_SET)
+#define bfin_write_PORTFIO_SET(val)          bfin_write16(PORTFIO_SET,val)
+#define bfin_read_PORTFIO_TOGGLE()           bfin_read16(PORTFIO_TOGGLE)
+#define bfin_write_PORTFIO_TOGGLE(val)       bfin_write16(PORTFIO_TOGGLE,val)
+#define bfin_read_PORTFIO_MASKA()            bfin_read16(PORTFIO_MASKA)
+#define bfin_write_PORTFIO_MASKA(val)        bfin_write16(PORTFIO_MASKA,val)
+#define bfin_read_PORTFIO_MASKA_CLEAR()      bfin_read16(PORTFIO_MASKA_CLEAR)
+#define bfin_write_PORTFIO_MASKA_CLEAR(val)  bfin_write16(PORTFIO_MASKA_CLEAR,val)
+#define bfin_read_PORTFIO_MASKA_SET()        bfin_read16(PORTFIO_MASKA_SET)
+#define bfin_write_PORTFIO_MASKA_SET(val)    bfin_write16(PORTFIO_MASKA_SET,val)
+#define bfin_read_PORTFIO_MASKA_TOGGLE()     bfin_read16(PORTFIO_MASKA_TOGGLE)
+#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE,val)
+#define bfin_read_PORTFIO_MASKB()            bfin_read16(PORTFIO_MASKB)
+#define bfin_write_PORTFIO_MASKB(val)        bfin_write16(PORTFIO_MASKB,val)
+#define bfin_read_PORTFIO_MASKB_CLEAR()      bfin_read16(PORTFIO_MASKB_CLEAR)
+#define bfin_write_PORTFIO_MASKB_CLEAR(val)  bfin_write16(PORTFIO_MASKB_CLEAR,val)
+#define bfin_read_PORTFIO_MASKB_SET()        bfin_read16(PORTFIO_MASKB_SET)
+#define bfin_write_PORTFIO_MASKB_SET(val)    bfin_write16(PORTFIO_MASKB_SET,val)
+#define bfin_read_PORTFIO_MASKB_TOGGLE()     bfin_read16(PORTFIO_MASKB_TOGGLE)
+#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE,val)
+#define bfin_read_PORTFIO_DIR()              bfin_read16(PORTFIO_DIR)
+#define bfin_write_PORTFIO_DIR(val)          bfin_write16(PORTFIO_DIR,val)
+#define bfin_read_PORTFIO_POLAR()            bfin_read16(PORTFIO_POLAR)
+#define bfin_write_PORTFIO_POLAR(val)        bfin_write16(PORTFIO_POLAR,val)
+#define bfin_read_PORTFIO_EDGE()             bfin_read16(PORTFIO_EDGE)
+#define bfin_write_PORTFIO_EDGE(val)         bfin_write16(PORTFIO_EDGE,val)
+#define bfin_read_PORTFIO_BOTH()             bfin_read16(PORTFIO_BOTH)
+#define bfin_write_PORTFIO_BOTH(val)         bfin_write16(PORTFIO_BOTH,val)
+#define bfin_read_PORTFIO_INEN()             bfin_read16(PORTFIO_INEN)
+#define bfin_write_PORTFIO_INEN(val)         bfin_write16(PORTFIO_INEN,val)
+
+/* SPORT0 Controller		(0xFFC00800 - 0xFFC008FF)								*/
+#define bfin_read_SPORT0_TCR1()              bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val)          bfin_write16(SPORT0_TCR1,val)
+#define bfin_read_SPORT0_TCR2()              bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val)          bfin_write16(SPORT0_TCR2,val)
+#define bfin_read_SPORT0_TCLKDIV()           bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val)       bfin_write16(SPORT0_TCLKDIV,val)
+#define bfin_read_SPORT0_TFSDIV()            bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val)        bfin_write16(SPORT0_TFSDIV,val)
+#define bfin_read_SPORT0_TX()                bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val)            bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX()                bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val)            bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX32()              bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX32(val)          bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX32()              bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX32(val)          bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX16()              bfin_read16(SPORT0_TX)
+#define bfin_write_SPORT0_TX16(val)          bfin_write16(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX16()              bfin_read16(SPORT0_RX)
+#define bfin_write_SPORT0_RX16(val)          bfin_write16(SPORT0_RX,val)
+#define bfin_read_SPORT0_RCR1()              bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val)          bfin_write16(SPORT0_RCR1,val)
+#define bfin_read_SPORT0_RCR2()              bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val)          bfin_write16(SPORT0_RCR2,val)
+#define bfin_read_SPORT0_RCLKDIV()           bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val)       bfin_write16(SPORT0_RCLKDIV,val)
+#define bfin_read_SPORT0_RFSDIV()            bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val)        bfin_write16(SPORT0_RFSDIV,val)
+#define bfin_read_SPORT0_STAT()              bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val)          bfin_write16(SPORT0_STAT,val)
+#define bfin_read_SPORT0_CHNL()              bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val)          bfin_write16(SPORT0_CHNL,val)
+#define bfin_read_SPORT0_MCMC1()             bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val)         bfin_write16(SPORT0_MCMC1,val)
+#define bfin_read_SPORT0_MCMC2()             bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val)         bfin_write16(SPORT0_MCMC2,val)
+#define bfin_read_SPORT0_MTCS0()             bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val)         bfin_write32(SPORT0_MTCS0,val)
+#define bfin_read_SPORT0_MTCS1()             bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val)         bfin_write32(SPORT0_MTCS1,val)
+#define bfin_read_SPORT0_MTCS2()             bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val)         bfin_write32(SPORT0_MTCS2,val)
+#define bfin_read_SPORT0_MTCS3()             bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val)         bfin_write32(SPORT0_MTCS3,val)
+#define bfin_read_SPORT0_MRCS0()             bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val)         bfin_write32(SPORT0_MRCS0,val)
+#define bfin_read_SPORT0_MRCS1()             bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val)         bfin_write32(SPORT0_MRCS1,val)
+#define bfin_read_SPORT0_MRCS2()             bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val)         bfin_write32(SPORT0_MRCS2,val)
+#define bfin_read_SPORT0_MRCS3()             bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val)         bfin_write32(SPORT0_MRCS3,val)
+
+/* SPORT1 Controller		(0xFFC00900 - 0xFFC009FF)								*/
+#define bfin_read_SPORT1_TCR1()              bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val)          bfin_write16(SPORT1_TCR1,val)
+#define bfin_read_SPORT1_TCR2()              bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val)          bfin_write16(SPORT1_TCR2,val)
+#define bfin_read_SPORT1_TCLKDIV()           bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val)       bfin_write16(SPORT1_TCLKDIV,val)
+#define bfin_read_SPORT1_TFSDIV()            bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val)        bfin_write16(SPORT1_TFSDIV,val)
+#define bfin_read_SPORT1_TX()                bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val)            bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX()                bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val)            bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX32()              bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX32(val)          bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX32()              bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX32(val)          bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX16()              bfin_read16(SPORT1_TX)
+#define bfin_write_SPORT1_TX16(val)          bfin_write16(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX16()              bfin_read16(SPORT1_RX)
+#define bfin_write_SPORT1_RX16(val)          bfin_write16(SPORT1_RX,val)
+#define bfin_read_SPORT1_RCR1()              bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val)          bfin_write16(SPORT1_RCR1,val)
+#define bfin_read_SPORT1_RCR2()              bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val)          bfin_write16(SPORT1_RCR2,val)
+#define bfin_read_SPORT1_RCLKDIV()           bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val)       bfin_write16(SPORT1_RCLKDIV,val)
+#define bfin_read_SPORT1_RFSDIV()            bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val)        bfin_write16(SPORT1_RFSDIV,val)
+#define bfin_read_SPORT1_STAT()              bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val)          bfin_write16(SPORT1_STAT,val)
+#define bfin_read_SPORT1_CHNL()              bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val)          bfin_write16(SPORT1_CHNL,val)
+#define bfin_read_SPORT1_MCMC1()             bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val)         bfin_write16(SPORT1_MCMC1,val)
+#define bfin_read_SPORT1_MCMC2()             bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val)         bfin_write16(SPORT1_MCMC2,val)
+#define bfin_read_SPORT1_MTCS0()             bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val)         bfin_write32(SPORT1_MTCS0,val)
+#define bfin_read_SPORT1_MTCS1()             bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val)         bfin_write32(SPORT1_MTCS1,val)
+#define bfin_read_SPORT1_MTCS2()             bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val)         bfin_write32(SPORT1_MTCS2,val)
+#define bfin_read_SPORT1_MTCS3()             bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val)         bfin_write32(SPORT1_MTCS3,val)
+#define bfin_read_SPORT1_MRCS0()             bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val)         bfin_write32(SPORT1_MRCS0,val)
+#define bfin_read_SPORT1_MRCS1()             bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val)         bfin_write32(SPORT1_MRCS1,val)
+#define bfin_read_SPORT1_MRCS2()             bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val)         bfin_write32(SPORT1_MRCS2,val)
+#define bfin_read_SPORT1_MRCS3()             bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val)         bfin_write32(SPORT1_MRCS3,val)
+
+/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF)							*/
+#define bfin_read_EBIU_AMGCTL()              bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val)          bfin_write16(EBIU_AMGCTL,val)
+#define bfin_read_EBIU_AMBCTL0()             bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val)         bfin_write32(EBIU_AMBCTL0,val)
+#define bfin_read_EBIU_AMBCTL1()             bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val)         bfin_write32(EBIU_AMBCTL1,val)
+#define bfin_read_EBIU_SDGCTL()              bfin_read32(EBIU_SDGCTL)
+#define bfin_write_EBIU_SDGCTL(val)          bfin_write32(EBIU_SDGCTL,val)
+#define bfin_read_EBIU_SDBCTL()              bfin_read16(EBIU_SDBCTL)
+#define bfin_write_EBIU_SDBCTL(val)          bfin_write16(EBIU_SDBCTL,val)
+#define bfin_read_EBIU_SDRRC()               bfin_read16(EBIU_SDRRC)
+#define bfin_write_EBIU_SDRRC(val)           bfin_write16(EBIU_SDRRC,val)
+#define bfin_read_EBIU_SDSTAT()              bfin_read16(EBIU_SDSTAT)
+#define bfin_write_EBIU_SDSTAT(val)          bfin_write16(EBIU_SDSTAT,val)
+
+/* DMA Traffic Control Registers													*/
+#define bfin_read_DMAC_TC_PER()              bfin_read16(DMAC_TC_PER)
+#define bfin_write_DMAC_TC_PER(val)          bfin_write16(DMAC_TC_PER,val)
+#define bfin_read_DMAC_TC_CNT()              bfin_read16(DMAC_TC_CNT)
+#define bfin_write_DMAC_TC_CNT(val)          bfin_write16(DMAC_TC_CNT,val)
+
+/* DMA Controller																	*/
+#define bfin_read_DMA0_CONFIG()              bfin_read16(DMA0_CONFIG)
+#define bfin_write_DMA0_CONFIG(val)          bfin_write16(DMA0_CONFIG,val)
+#define bfin_read_DMA0_NEXT_DESC_PTR()       bfin_read32(DMA0_NEXT_DESC_PTR)
+#define bfin_write_DMA0_NEXT_DESC_PTR(val)   bfin_write32(DMA0_NEXT_DESC_PTR,val)
+#define bfin_read_DMA0_START_ADDR()          bfin_read32(DMA0_START_ADDR)
+#define bfin_write_DMA0_START_ADDR(val)      bfin_write32(DMA0_START_ADDR,val)
+#define bfin_read_DMA0_X_COUNT()             bfin_read16(DMA0_X_COUNT)
+#define bfin_write_DMA0_X_COUNT(val)         bfin_write16(DMA0_X_COUNT,val)
+#define bfin_read_DMA0_Y_COUNT()             bfin_read16(DMA0_Y_COUNT)
+#define bfin_write_DMA0_Y_COUNT(val)         bfin_write16(DMA0_Y_COUNT,val)
+#define bfin_read_DMA0_X_MODIFY()            bfin_read16(DMA0_X_MODIFY)
+#define bfin_write_DMA0_X_MODIFY(val)        bfin_write16(DMA0_X_MODIFY,val)
+#define bfin_read_DMA0_Y_MODIFY()            bfin_read16(DMA0_Y_MODIFY)
+#define bfin_write_DMA0_Y_MODIFY(val)        bfin_write16(DMA0_Y_MODIFY,val)
+#define bfin_read_DMA0_CURR_DESC_PTR()       bfin_read32(DMA0_CURR_DESC_PTR)
+#define bfin_write_DMA0_CURR_DESC_PTR(val)   bfin_write32(DMA0_CURR_DESC_PTR,val)
+#define bfin_read_DMA0_CURR_ADDR()           bfin_read32(DMA0_CURR_ADDR)
+#define bfin_write_DMA0_CURR_ADDR(val)       bfin_write32(DMA0_CURR_ADDR,val)
+#define bfin_read_DMA0_CURR_X_COUNT()        bfin_read16(DMA0_CURR_X_COUNT)
+#define bfin_write_DMA0_CURR_X_COUNT(val)    bfin_write16(DMA0_CURR_X_COUNT,val)
+#define bfin_read_DMA0_CURR_Y_COUNT()        bfin_read16(DMA0_CURR_Y_COUNT)
+#define bfin_write_DMA0_CURR_Y_COUNT(val)    bfin_write16(DMA0_CURR_Y_COUNT,val)
+#define bfin_read_DMA0_IRQ_STATUS()          bfin_read16(DMA0_IRQ_STATUS)
+#define bfin_write_DMA0_IRQ_STATUS(val)      bfin_write16(DMA0_IRQ_STATUS,val)
+#define bfin_read_DMA0_PERIPHERAL_MAP()      bfin_read16(DMA0_PERIPHERAL_MAP)
+#define bfin_write_DMA0_PERIPHERAL_MAP(val)  bfin_write16(DMA0_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA1_CONFIG()              bfin_read16(DMA1_CONFIG)
+#define bfin_write_DMA1_CONFIG(val)          bfin_write16(DMA1_CONFIG,val)
+#define bfin_read_DMA1_NEXT_DESC_PTR()       bfin_read32(DMA1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_NEXT_DESC_PTR(val)   bfin_write32(DMA1_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_START_ADDR()          bfin_read32(DMA1_START_ADDR)
+#define bfin_write_DMA1_START_ADDR(val)      bfin_write32(DMA1_START_ADDR,val)
+#define bfin_read_DMA1_X_COUNT()             bfin_read16(DMA1_X_COUNT)
+#define bfin_write_DMA1_X_COUNT(val)         bfin_write16(DMA1_X_COUNT,val)
+#define bfin_read_DMA1_Y_COUNT()             bfin_read16(DMA1_Y_COUNT)
+#define bfin_write_DMA1_Y_COUNT(val)         bfin_write16(DMA1_Y_COUNT,val)
+#define bfin_read_DMA1_X_MODIFY()            bfin_read16(DMA1_X_MODIFY)
+#define bfin_write_DMA1_X_MODIFY(val)        bfin_write16(DMA1_X_MODIFY,val)
+#define bfin_read_DMA1_Y_MODIFY()            bfin_read16(DMA1_Y_MODIFY)
+#define bfin_write_DMA1_Y_MODIFY(val)        bfin_write16(DMA1_Y_MODIFY,val)
+#define bfin_read_DMA1_CURR_DESC_PTR()       bfin_read32(DMA1_CURR_DESC_PTR)
+#define bfin_write_DMA1_CURR_DESC_PTR(val)   bfin_write32(DMA1_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_CURR_ADDR()           bfin_read32(DMA1_CURR_ADDR)
+#define bfin_write_DMA1_CURR_ADDR(val)       bfin_write32(DMA1_CURR_ADDR,val)
+#define bfin_read_DMA1_CURR_X_COUNT()        bfin_read16(DMA1_CURR_X_COUNT)
+#define bfin_write_DMA1_CURR_X_COUNT(val)    bfin_write16(DMA1_CURR_X_COUNT,val)
+#define bfin_read_DMA1_CURR_Y_COUNT()        bfin_read16(DMA1_CURR_Y_COUNT)
+#define bfin_write_DMA1_CURR_Y_COUNT(val)    bfin_write16(DMA1_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_IRQ_STATUS()          bfin_read16(DMA1_IRQ_STATUS)
+#define bfin_write_DMA1_IRQ_STATUS(val)      bfin_write16(DMA1_IRQ_STATUS,val)
+#define bfin_read_DMA1_PERIPHERAL_MAP()      bfin_read16(DMA1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_PERIPHERAL_MAP(val)  bfin_write16(DMA1_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA2_CONFIG()              bfin_read16(DMA2_CONFIG)
+#define bfin_write_DMA2_CONFIG(val)          bfin_write16(DMA2_CONFIG,val)
+#define bfin_read_DMA2_NEXT_DESC_PTR()       bfin_read32(DMA2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_NEXT_DESC_PTR(val)   bfin_write32(DMA2_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_START_ADDR()          bfin_read32(DMA2_START_ADDR)
+#define bfin_write_DMA2_START_ADDR(val)      bfin_write32(DMA2_START_ADDR,val)
+#define bfin_read_DMA2_X_COUNT()             bfin_read16(DMA2_X_COUNT)
+#define bfin_write_DMA2_X_COUNT(val)         bfin_write16(DMA2_X_COUNT,val)
+#define bfin_read_DMA2_Y_COUNT()             bfin_read16(DMA2_Y_COUNT)
+#define bfin_write_DMA2_Y_COUNT(val)         bfin_write16(DMA2_Y_COUNT,val)
+#define bfin_read_DMA2_X_MODIFY()            bfin_read16(DMA2_X_MODIFY)
+#define bfin_write_DMA2_X_MODIFY(val)        bfin_write16(DMA2_X_MODIFY,val)
+#define bfin_read_DMA2_Y_MODIFY()            bfin_read16(DMA2_Y_MODIFY)
+#define bfin_write_DMA2_Y_MODIFY(val)        bfin_write16(DMA2_Y_MODIFY,val)
+#define bfin_read_DMA2_CURR_DESC_PTR()       bfin_read32(DMA2_CURR_DESC_PTR)
+#define bfin_write_DMA2_CURR_DESC_PTR(val)   bfin_write32(DMA2_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_CURR_ADDR()           bfin_read32(DMA2_CURR_ADDR)
+#define bfin_write_DMA2_CURR_ADDR(val)       bfin_write32(DMA2_CURR_ADDR,val)
+#define bfin_read_DMA2_CURR_X_COUNT()        bfin_read16(DMA2_CURR_X_COUNT)
+#define bfin_write_DMA2_CURR_X_COUNT(val)    bfin_write16(DMA2_CURR_X_COUNT,val)
+#define bfin_read_DMA2_CURR_Y_COUNT()        bfin_read16(DMA2_CURR_Y_COUNT)
+#define bfin_write_DMA2_CURR_Y_COUNT(val)    bfin_write16(DMA2_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_IRQ_STATUS()          bfin_read16(DMA2_IRQ_STATUS)
+#define bfin_write_DMA2_IRQ_STATUS(val)      bfin_write16(DMA2_IRQ_STATUS,val)
+#define bfin_read_DMA2_PERIPHERAL_MAP()      bfin_read16(DMA2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_PERIPHERAL_MAP(val)  bfin_write16(DMA2_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA3_CONFIG()              bfin_read16(DMA3_CONFIG)
+#define bfin_write_DMA3_CONFIG(val)          bfin_write16(DMA3_CONFIG,val)
+#define bfin_read_DMA3_NEXT_DESC_PTR()       bfin_read32(DMA3_NEXT_DESC_PTR)
+#define bfin_write_DMA3_NEXT_DESC_PTR(val)   bfin_write32(DMA3_NEXT_DESC_PTR,val)
+#define bfin_read_DMA3_START_ADDR()          bfin_read32(DMA3_START_ADDR)
+#define bfin_write_DMA3_START_ADDR(val)      bfin_write32(DMA3_START_ADDR,val)
+#define bfin_read_DMA3_X_COUNT()             bfin_read16(DMA3_X_COUNT)
+#define bfin_write_DMA3_X_COUNT(val)         bfin_write16(DMA3_X_COUNT,val)
+#define bfin_read_DMA3_Y_COUNT()             bfin_read16(DMA3_Y_COUNT)
+#define bfin_write_DMA3_Y_COUNT(val)         bfin_write16(DMA3_Y_COUNT,val)
+#define bfin_read_DMA3_X_MODIFY()            bfin_read16(DMA3_X_MODIFY)
+#define bfin_write_DMA3_X_MODIFY(val)        bfin_write16(DMA3_X_MODIFY,val)
+#define bfin_read_DMA3_Y_MODIFY()            bfin_read16(DMA3_Y_MODIFY)
+#define bfin_write_DMA3_Y_MODIFY(val)        bfin_write16(DMA3_Y_MODIFY,val)
+#define bfin_read_DMA3_CURR_DESC_PTR()       bfin_read32(DMA3_CURR_DESC_PTR)
+#define bfin_write_DMA3_CURR_DESC_PTR(val)   bfin_write32(DMA3_CURR_DESC_PTR,val)
+#define bfin_read_DMA3_CURR_ADDR()           bfin_read32(DMA3_CURR_ADDR)
+#define bfin_write_DMA3_CURR_ADDR(val)       bfin_write32(DMA3_CURR_ADDR,val)
+#define bfin_read_DMA3_CURR_X_COUNT()        bfin_read16(DMA3_CURR_X_COUNT)
+#define bfin_write_DMA3_CURR_X_COUNT(val)    bfin_write16(DMA3_CURR_X_COUNT,val)
+#define bfin_read_DMA3_CURR_Y_COUNT()        bfin_read16(DMA3_CURR_Y_COUNT)
+#define bfin_write_DMA3_CURR_Y_COUNT(val)    bfin_write16(DMA3_CURR_Y_COUNT,val)
+#define bfin_read_DMA3_IRQ_STATUS()          bfin_read16(DMA3_IRQ_STATUS)
+#define bfin_write_DMA3_IRQ_STATUS(val)      bfin_write16(DMA3_IRQ_STATUS,val)
+#define bfin_read_DMA3_PERIPHERAL_MAP()      bfin_read16(DMA3_PERIPHERAL_MAP)
+#define bfin_write_DMA3_PERIPHERAL_MAP(val)  bfin_write16(DMA3_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA4_CONFIG()              bfin_read16(DMA4_CONFIG)
+#define bfin_write_DMA4_CONFIG(val)          bfin_write16(DMA4_CONFIG,val)
+#define bfin_read_DMA4_NEXT_DESC_PTR()       bfin_read32(DMA4_NEXT_DESC_PTR)
+#define bfin_write_DMA4_NEXT_DESC_PTR(val)   bfin_write32(DMA4_NEXT_DESC_PTR,val)
+#define bfin_read_DMA4_START_ADDR()          bfin_read32(DMA4_START_ADDR)
+#define bfin_write_DMA4_START_ADDR(val)      bfin_write32(DMA4_START_ADDR,val)
+#define bfin_read_DMA4_X_COUNT()             bfin_read16(DMA4_X_COUNT)
+#define bfin_write_DMA4_X_COUNT(val)         bfin_write16(DMA4_X_COUNT,val)
+#define bfin_read_DMA4_Y_COUNT()             bfin_read16(DMA4_Y_COUNT)
+#define bfin_write_DMA4_Y_COUNT(val)         bfin_write16(DMA4_Y_COUNT,val)
+#define bfin_read_DMA4_X_MODIFY()            bfin_read16(DMA4_X_MODIFY)
+#define bfin_write_DMA4_X_MODIFY(val)        bfin_write16(DMA4_X_MODIFY,val)
+#define bfin_read_DMA4_Y_MODIFY()            bfin_read16(DMA4_Y_MODIFY)
+#define bfin_write_DMA4_Y_MODIFY(val)        bfin_write16(DMA4_Y_MODIFY,val)
+#define bfin_read_DMA4_CURR_DESC_PTR()       bfin_read32(DMA4_CURR_DESC_PTR)
+#define bfin_write_DMA4_CURR_DESC_PTR(val)   bfin_write32(DMA4_CURR_DESC_PTR,val)
+#define bfin_read_DMA4_CURR_ADDR()           bfin_read32(DMA4_CURR_ADDR)
+#define bfin_write_DMA4_CURR_ADDR(val)       bfin_write32(DMA4_CURR_ADDR,val)
+#define bfin_read_DMA4_CURR_X_COUNT()        bfin_read16(DMA4_CURR_X_COUNT)
+#define bfin_write_DMA4_CURR_X_COUNT(val)    bfin_write16(DMA4_CURR_X_COUNT,val)
+#define bfin_read_DMA4_CURR_Y_COUNT()        bfin_read16(DMA4_CURR_Y_COUNT)
+#define bfin_write_DMA4_CURR_Y_COUNT(val)    bfin_write16(DMA4_CURR_Y_COUNT,val)
+#define bfin_read_DMA4_IRQ_STATUS()          bfin_read16(DMA4_IRQ_STATUS)
+#define bfin_write_DMA4_IRQ_STATUS(val)      bfin_write16(DMA4_IRQ_STATUS,val)
+#define bfin_read_DMA4_PERIPHERAL_MAP()      bfin_read16(DMA4_PERIPHERAL_MAP)
+#define bfin_write_DMA4_PERIPHERAL_MAP(val)  bfin_write16(DMA4_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA5_CONFIG()              bfin_read16(DMA5_CONFIG)
+#define bfin_write_DMA5_CONFIG(val)          bfin_write16(DMA5_CONFIG,val)
+#define bfin_read_DMA5_NEXT_DESC_PTR()       bfin_read32(DMA5_NEXT_DESC_PTR)
+#define bfin_write_DMA5_NEXT_DESC_PTR(val)   bfin_write32(DMA5_NEXT_DESC_PTR,val)
+#define bfin_read_DMA5_START_ADDR()          bfin_read32(DMA5_START_ADDR)
+#define bfin_write_DMA5_START_ADDR(val)      bfin_write32(DMA5_START_ADDR,val)
+#define bfin_read_DMA5_X_COUNT()             bfin_read16(DMA5_X_COUNT)
+#define bfin_write_DMA5_X_COUNT(val)         bfin_write16(DMA5_X_COUNT,val)
+#define bfin_read_DMA5_Y_COUNT()             bfin_read16(DMA5_Y_COUNT)
+#define bfin_write_DMA5_Y_COUNT(val)         bfin_write16(DMA5_Y_COUNT,val)
+#define bfin_read_DMA5_X_MODIFY()            bfin_read16(DMA5_X_MODIFY)
+#define bfin_write_DMA5_X_MODIFY(val)        bfin_write16(DMA5_X_MODIFY,val)
+#define bfin_read_DMA5_Y_MODIFY()            bfin_read16(DMA5_Y_MODIFY)
+#define bfin_write_DMA5_Y_MODIFY(val)        bfin_write16(DMA5_Y_MODIFY,val)
+#define bfin_read_DMA5_CURR_DESC_PTR()       bfin_read32(DMA5_CURR_DESC_PTR)
+#define bfin_write_DMA5_CURR_DESC_PTR(val)   bfin_write32(DMA5_CURR_DESC_PTR,val)
+#define bfin_read_DMA5_CURR_ADDR()           bfin_read32(DMA5_CURR_ADDR)
+#define bfin_write_DMA5_CURR_ADDR(val)       bfin_write32(DMA5_CURR_ADDR,val)
+#define bfin_read_DMA5_CURR_X_COUNT()        bfin_read16(DMA5_CURR_X_COUNT)
+#define bfin_write_DMA5_CURR_X_COUNT(val)    bfin_write16(DMA5_CURR_X_COUNT,val)
+#define bfin_read_DMA5_CURR_Y_COUNT()        bfin_read16(DMA5_CURR_Y_COUNT)
+#define bfin_write_DMA5_CURR_Y_COUNT(val)    bfin_write16(DMA5_CURR_Y_COUNT,val)
+#define bfin_read_DMA5_IRQ_STATUS()          bfin_read16(DMA5_IRQ_STATUS)
+#define bfin_write_DMA5_IRQ_STATUS(val)      bfin_write16(DMA5_IRQ_STATUS,val)
+#define bfin_read_DMA5_PERIPHERAL_MAP()      bfin_read16(DMA5_PERIPHERAL_MAP)
+#define bfin_write_DMA5_PERIPHERAL_MAP(val)  bfin_write16(DMA5_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA6_CONFIG()              bfin_read16(DMA6_CONFIG)
+#define bfin_write_DMA6_CONFIG(val)          bfin_write16(DMA6_CONFIG,val)
+#define bfin_read_DMA6_NEXT_DESC_PTR()       bfin_read32(DMA6_NEXT_DESC_PTR)
+#define bfin_write_DMA6_NEXT_DESC_PTR(val)   bfin_write32(DMA6_NEXT_DESC_PTR,val)
+#define bfin_read_DMA6_START_ADDR()          bfin_read32(DMA6_START_ADDR)
+#define bfin_write_DMA6_START_ADDR(val)      bfin_write32(DMA6_START_ADDR,val)
+#define bfin_read_DMA6_X_COUNT()             bfin_read16(DMA6_X_COUNT)
+#define bfin_write_DMA6_X_COUNT(val)         bfin_write16(DMA6_X_COUNT,val)
+#define bfin_read_DMA6_Y_COUNT()             bfin_read16(DMA6_Y_COUNT)
+#define bfin_write_DMA6_Y_COUNT(val)         bfin_write16(DMA6_Y_COUNT,val)
+#define bfin_read_DMA6_X_MODIFY()            bfin_read16(DMA6_X_MODIFY)
+#define bfin_write_DMA6_X_MODIFY(val)        bfin_write16(DMA6_X_MODIFY,val)
+#define bfin_read_DMA6_Y_MODIFY()            bfin_read16(DMA6_Y_MODIFY)
+#define bfin_write_DMA6_Y_MODIFY(val)        bfin_write16(DMA6_Y_MODIFY,val)
+#define bfin_read_DMA6_CURR_DESC_PTR()       bfin_read32(DMA6_CURR_DESC_PTR)
+#define bfin_write_DMA6_CURR_DESC_PTR(val)   bfin_write32(DMA6_CURR_DESC_PTR,val)
+#define bfin_read_DMA6_CURR_ADDR()           bfin_read32(DMA6_CURR_ADDR)
+#define bfin_write_DMA6_CURR_ADDR(val)       bfin_write32(DMA6_CURR_ADDR,val)
+#define bfin_read_DMA6_CURR_X_COUNT()        bfin_read16(DMA6_CURR_X_COUNT)
+#define bfin_write_DMA6_CURR_X_COUNT(val)    bfin_write16(DMA6_CURR_X_COUNT,val)
+#define bfin_read_DMA6_CURR_Y_COUNT()        bfin_read16(DMA6_CURR_Y_COUNT)
+#define bfin_write_DMA6_CURR_Y_COUNT(val)    bfin_write16(DMA6_CURR_Y_COUNT,val)
+#define bfin_read_DMA6_IRQ_STATUS()          bfin_read16(DMA6_IRQ_STATUS)
+#define bfin_write_DMA6_IRQ_STATUS(val)      bfin_write16(DMA6_IRQ_STATUS,val)
+#define bfin_read_DMA6_PERIPHERAL_MAP()      bfin_read16(DMA6_PERIPHERAL_MAP)
+#define bfin_write_DMA6_PERIPHERAL_MAP(val)  bfin_write16(DMA6_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA7_CONFIG()              bfin_read16(DMA7_CONFIG)
+#define bfin_write_DMA7_CONFIG(val)          bfin_write16(DMA7_CONFIG,val)
+#define bfin_read_DMA7_NEXT_DESC_PTR()       bfin_read32(DMA7_NEXT_DESC_PTR)
+#define bfin_write_DMA7_NEXT_DESC_PTR(val)   bfin_write32(DMA7_NEXT_DESC_PTR,val)
+#define bfin_read_DMA7_START_ADDR()          bfin_read32(DMA7_START_ADDR)
+#define bfin_write_DMA7_START_ADDR(val)      bfin_write32(DMA7_START_ADDR,val)
+#define bfin_read_DMA7_X_COUNT()             bfin_read16(DMA7_X_COUNT)
+#define bfin_write_DMA7_X_COUNT(val)         bfin_write16(DMA7_X_COUNT,val)
+#define bfin_read_DMA7_Y_COUNT()             bfin_read16(DMA7_Y_COUNT)
+#define bfin_write_DMA7_Y_COUNT(val)         bfin_write16(DMA7_Y_COUNT,val)
+#define bfin_read_DMA7_X_MODIFY()            bfin_read16(DMA7_X_MODIFY)
+#define bfin_write_DMA7_X_MODIFY(val)        bfin_write16(DMA7_X_MODIFY,val)
+#define bfin_read_DMA7_Y_MODIFY()            bfin_read16(DMA7_Y_MODIFY)
+#define bfin_write_DMA7_Y_MODIFY(val)        bfin_write16(DMA7_Y_MODIFY,val)
+#define bfin_read_DMA7_CURR_DESC_PTR()       bfin_read32(DMA7_CURR_DESC_PTR)
+#define bfin_write_DMA7_CURR_DESC_PTR(val)   bfin_write32(DMA7_CURR_DESC_PTR,val)
+#define bfin_read_DMA7_CURR_ADDR()           bfin_read32(DMA7_CURR_ADDR)
+#define bfin_write_DMA7_CURR_ADDR(val)       bfin_write32(DMA7_CURR_ADDR,val)
+#define bfin_read_DMA7_CURR_X_COUNT()        bfin_read16(DMA7_CURR_X_COUNT)
+#define bfin_write_DMA7_CURR_X_COUNT(val)    bfin_write16(DMA7_CURR_X_COUNT,val)
+#define bfin_read_DMA7_CURR_Y_COUNT()        bfin_read16(DMA7_CURR_Y_COUNT)
+#define bfin_write_DMA7_CURR_Y_COUNT(val)    bfin_write16(DMA7_CURR_Y_COUNT,val)
+#define bfin_read_DMA7_IRQ_STATUS()          bfin_read16(DMA7_IRQ_STATUS)
+#define bfin_write_DMA7_IRQ_STATUS(val)      bfin_write16(DMA7_IRQ_STATUS,val)
+#define bfin_read_DMA7_PERIPHERAL_MAP()      bfin_read16(DMA7_PERIPHERAL_MAP)
+#define bfin_write_DMA7_PERIPHERAL_MAP(val)  bfin_write16(DMA7_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA8_CONFIG()              bfin_read16(DMA8_CONFIG)
+#define bfin_write_DMA8_CONFIG(val)          bfin_write16(DMA8_CONFIG,val)
+#define bfin_read_DMA8_NEXT_DESC_PTR()       bfin_read32(DMA8_NEXT_DESC_PTR)
+#define bfin_write_DMA8_NEXT_DESC_PTR(val)   bfin_write32(DMA8_NEXT_DESC_PTR,val)
+#define bfin_read_DMA8_START_ADDR()          bfin_read32(DMA8_START_ADDR)
+#define bfin_write_DMA8_START_ADDR(val)      bfin_write32(DMA8_START_ADDR,val)
+#define bfin_read_DMA8_X_COUNT()             bfin_read16(DMA8_X_COUNT)
+#define bfin_write_DMA8_X_COUNT(val)         bfin_write16(DMA8_X_COUNT,val)
+#define bfin_read_DMA8_Y_COUNT()             bfin_read16(DMA8_Y_COUNT)
+#define bfin_write_DMA8_Y_COUNT(val)         bfin_write16(DMA8_Y_COUNT,val)
+#define bfin_read_DMA8_X_MODIFY()            bfin_read16(DMA8_X_MODIFY)
+#define bfin_write_DMA8_X_MODIFY(val)        bfin_write16(DMA8_X_MODIFY,val)
+#define bfin_read_DMA8_Y_MODIFY()            bfin_read16(DMA8_Y_MODIFY)
+#define bfin_write_DMA8_Y_MODIFY(val)        bfin_write16(DMA8_Y_MODIFY,val)
+#define bfin_read_DMA8_CURR_DESC_PTR()       bfin_read32(DMA8_CURR_DESC_PTR)
+#define bfin_write_DMA8_CURR_DESC_PTR(val)   bfin_write32(DMA8_CURR_DESC_PTR,val)
+#define bfin_read_DMA8_CURR_ADDR()           bfin_read32(DMA8_CURR_ADDR)
+#define bfin_write_DMA8_CURR_ADDR(val)       bfin_write32(DMA8_CURR_ADDR,val)
+#define bfin_read_DMA8_CURR_X_COUNT()        bfin_read16(DMA8_CURR_X_COUNT)
+#define bfin_write_DMA8_CURR_X_COUNT(val)    bfin_write16(DMA8_CURR_X_COUNT,val)
+#define bfin_read_DMA8_CURR_Y_COUNT()        bfin_read16(DMA8_CURR_Y_COUNT)
+#define bfin_write_DMA8_CURR_Y_COUNT(val)    bfin_write16(DMA8_CURR_Y_COUNT,val)
+#define bfin_read_DMA8_IRQ_STATUS()          bfin_read16(DMA8_IRQ_STATUS)
+#define bfin_write_DMA8_IRQ_STATUS(val)      bfin_write16(DMA8_IRQ_STATUS,val)
+#define bfin_read_DMA8_PERIPHERAL_MAP()      bfin_read16(DMA8_PERIPHERAL_MAP)
+#define bfin_write_DMA8_PERIPHERAL_MAP(val)  bfin_write16(DMA8_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA9_CONFIG()              bfin_read16(DMA9_CONFIG)
+#define bfin_write_DMA9_CONFIG(val)          bfin_write16(DMA9_CONFIG,val)
+#define bfin_read_DMA9_NEXT_DESC_PTR()       bfin_read32(DMA9_NEXT_DESC_PTR)
+#define bfin_write_DMA9_NEXT_DESC_PTR(val)   bfin_write32(DMA9_NEXT_DESC_PTR,val)
+#define bfin_read_DMA9_START_ADDR()          bfin_read32(DMA9_START_ADDR)
+#define bfin_write_DMA9_START_ADDR(val)      bfin_write32(DMA9_START_ADDR,val)
+#define bfin_read_DMA9_X_COUNT()             bfin_read16(DMA9_X_COUNT)
+#define bfin_write_DMA9_X_COUNT(val)         bfin_write16(DMA9_X_COUNT,val)
+#define bfin_read_DMA9_Y_COUNT()             bfin_read16(DMA9_Y_COUNT)
+#define bfin_write_DMA9_Y_COUNT(val)         bfin_write16(DMA9_Y_COUNT,val)
+#define bfin_read_DMA9_X_MODIFY()            bfin_read16(DMA9_X_MODIFY)
+#define bfin_write_DMA9_X_MODIFY(val)        bfin_write16(DMA9_X_MODIFY,val)
+#define bfin_read_DMA9_Y_MODIFY()            bfin_read16(DMA9_Y_MODIFY)
+#define bfin_write_DMA9_Y_MODIFY(val)        bfin_write16(DMA9_Y_MODIFY,val)
+#define bfin_read_DMA9_CURR_DESC_PTR()       bfin_read32(DMA9_CURR_DESC_PTR)
+#define bfin_write_DMA9_CURR_DESC_PTR(val)   bfin_write32(DMA9_CURR_DESC_PTR,val)
+#define bfin_read_DMA9_CURR_ADDR()           bfin_read32(DMA9_CURR_ADDR)
+#define bfin_write_DMA9_CURR_ADDR(val)       bfin_write32(DMA9_CURR_ADDR,val)
+#define bfin_read_DMA9_CURR_X_COUNT()        bfin_read16(DMA9_CURR_X_COUNT)
+#define bfin_write_DMA9_CURR_X_COUNT(val)    bfin_write16(DMA9_CURR_X_COUNT,val)
+#define bfin_read_DMA9_CURR_Y_COUNT()        bfin_read16(DMA9_CURR_Y_COUNT)
+#define bfin_write_DMA9_CURR_Y_COUNT(val)    bfin_write16(DMA9_CURR_Y_COUNT,val)
+#define bfin_read_DMA9_IRQ_STATUS()          bfin_read16(DMA9_IRQ_STATUS)
+#define bfin_write_DMA9_IRQ_STATUS(val)      bfin_write16(DMA9_IRQ_STATUS,val)
+#define bfin_read_DMA9_PERIPHERAL_MAP()      bfin_read16(DMA9_PERIPHERAL_MAP)
+#define bfin_write_DMA9_PERIPHERAL_MAP(val)  bfin_write16(DMA9_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA10_CONFIG()             bfin_read16(DMA10_CONFIG)
+#define bfin_write_DMA10_CONFIG(val)         bfin_write16(DMA10_CONFIG,val)
+#define bfin_read_DMA10_NEXT_DESC_PTR()      bfin_read32(DMA10_NEXT_DESC_PTR)
+#define bfin_write_DMA10_NEXT_DESC_PTR(val)  bfin_write32(DMA10_NEXT_DESC_PTR,val)
+#define bfin_read_DMA10_START_ADDR()         bfin_read32(DMA10_START_ADDR)
+#define bfin_write_DMA10_START_ADDR(val)     bfin_write32(DMA10_START_ADDR,val)
+#define bfin_read_DMA10_X_COUNT()            bfin_read16(DMA10_X_COUNT)
+#define bfin_write_DMA10_X_COUNT(val)        bfin_write16(DMA10_X_COUNT,val)
+#define bfin_read_DMA10_Y_COUNT()            bfin_read16(DMA10_Y_COUNT)
+#define bfin_write_DMA10_Y_COUNT(val)        bfin_write16(DMA10_Y_COUNT,val)
+#define bfin_read_DMA10_X_MODIFY()           bfin_read16(DMA10_X_MODIFY)
+#define bfin_write_DMA10_X_MODIFY(val)       bfin_write16(DMA10_X_MODIFY,val)
+#define bfin_read_DMA10_Y_MODIFY()           bfin_read16(DMA10_Y_MODIFY)
+#define bfin_write_DMA10_Y_MODIFY(val)       bfin_write16(DMA10_Y_MODIFY,val)
+#define bfin_read_DMA10_CURR_DESC_PTR()      bfin_read32(DMA10_CURR_DESC_PTR)
+#define bfin_write_DMA10_CURR_DESC_PTR(val)  bfin_write32(DMA10_CURR_DESC_PTR,val)
+#define bfin_read_DMA10_CURR_ADDR()          bfin_read32(DMA10_CURR_ADDR)
+#define bfin_write_DMA10_CURR_ADDR(val)      bfin_write32(DMA10_CURR_ADDR,val)
+#define bfin_read_DMA10_CURR_X_COUNT()       bfin_read16(DMA10_CURR_X_COUNT)
+#define bfin_write_DMA10_CURR_X_COUNT(val)   bfin_write16(DMA10_CURR_X_COUNT,val)
+#define bfin_read_DMA10_CURR_Y_COUNT()       bfin_read16(DMA10_CURR_Y_COUNT)
+#define bfin_write_DMA10_CURR_Y_COUNT(val)   bfin_write16(DMA10_CURR_Y_COUNT,val)
+#define bfin_read_DMA10_IRQ_STATUS()         bfin_read16(DMA10_IRQ_STATUS)
+#define bfin_write_DMA10_IRQ_STATUS(val)     bfin_write16(DMA10_IRQ_STATUS,val)
+#define bfin_read_DMA10_PERIPHERAL_MAP()     bfin_read16(DMA10_PERIPHERAL_MAP)
+#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA11_CONFIG()             bfin_read16(DMA11_CONFIG)
+#define bfin_write_DMA11_CONFIG(val)         bfin_write16(DMA11_CONFIG,val)
+#define bfin_read_DMA11_NEXT_DESC_PTR()      bfin_read32(DMA11_NEXT_DESC_PTR)
+#define bfin_write_DMA11_NEXT_DESC_PTR(val)  bfin_write32(DMA11_NEXT_DESC_PTR,val)
+#define bfin_read_DMA11_START_ADDR()         bfin_read32(DMA11_START_ADDR)
+#define bfin_write_DMA11_START_ADDR(val)     bfin_write32(DMA11_START_ADDR,val)
+#define bfin_read_DMA11_X_COUNT()            bfin_read16(DMA11_X_COUNT)
+#define bfin_write_DMA11_X_COUNT(val)        bfin_write16(DMA11_X_COUNT,val)
+#define bfin_read_DMA11_Y_COUNT()            bfin_read16(DMA11_Y_COUNT)
+#define bfin_write_DMA11_Y_COUNT(val)        bfin_write16(DMA11_Y_COUNT,val)
+#define bfin_read_DMA11_X_MODIFY()           bfin_read16(DMA11_X_MODIFY)
+#define bfin_write_DMA11_X_MODIFY(val)       bfin_write16(DMA11_X_MODIFY,val)
+#define bfin_read_DMA11_Y_MODIFY()           bfin_read16(DMA11_Y_MODIFY)
+#define bfin_write_DMA11_Y_MODIFY(val)       bfin_write16(DMA11_Y_MODIFY,val)
+#define bfin_read_DMA11_CURR_DESC_PTR()      bfin_read32(DMA11_CURR_DESC_PTR)
+#define bfin_write_DMA11_CURR_DESC_PTR(val)  bfin_write32(DMA11_CURR_DESC_PTR,val)
+#define bfin_read_DMA11_CURR_ADDR()          bfin_read32(DMA11_CURR_ADDR)
+#define bfin_write_DMA11_CURR_ADDR(val)      bfin_write32(DMA11_CURR_ADDR,val)
+#define bfin_read_DMA11_CURR_X_COUNT()       bfin_read16(DMA11_CURR_X_COUNT)
+#define bfin_write_DMA11_CURR_X_COUNT(val)   bfin_write16(DMA11_CURR_X_COUNT,val)
+#define bfin_read_DMA11_CURR_Y_COUNT()       bfin_read16(DMA11_CURR_Y_COUNT)
+#define bfin_write_DMA11_CURR_Y_COUNT(val)   bfin_write16(DMA11_CURR_Y_COUNT,val)
+#define bfin_read_DMA11_IRQ_STATUS()         bfin_read16(DMA11_IRQ_STATUS)
+#define bfin_write_DMA11_IRQ_STATUS(val)     bfin_write16(DMA11_IRQ_STATUS,val)
+#define bfin_read_DMA11_PERIPHERAL_MAP()     bfin_read16(DMA11_PERIPHERAL_MAP)
+#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_D0_CONFIG()           bfin_read16(MDMA_D0_CONFIG)
+#define bfin_write_MDMA_D0_CONFIG(val)       bfin_write16(MDMA_D0_CONFIG,val)
+#define bfin_read_MDMA_D0_NEXT_DESC_PTR()    bfin_read32(MDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D0_START_ADDR()       bfin_read32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val)   bfin_write32(MDMA_D0_START_ADDR,val)
+#define bfin_read_MDMA_D0_X_COUNT()          bfin_read16(MDMA_D0_X_COUNT)
+#define bfin_write_MDMA_D0_X_COUNT(val)      bfin_write16(MDMA_D0_X_COUNT,val)
+#define bfin_read_MDMA_D0_Y_COUNT()          bfin_read16(MDMA_D0_Y_COUNT)
+#define bfin_write_MDMA_D0_Y_COUNT(val)      bfin_write16(MDMA_D0_Y_COUNT,val)
+#define bfin_read_MDMA_D0_X_MODIFY()         bfin_read16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val)     bfin_write16(MDMA_D0_X_MODIFY,val)
+#define bfin_read_MDMA_D0_Y_MODIFY()         bfin_read16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val)     bfin_write16(MDMA_D0_Y_MODIFY,val)
+#define bfin_read_MDMA_D0_CURR_DESC_PTR()    bfin_read32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D0_CURR_ADDR()        bfin_read32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val)    bfin_write32(MDMA_D0_CURR_ADDR,val)
+#define bfin_read_MDMA_D0_CURR_X_COUNT()     bfin_read16(MDMA_D0_CURR_X_COUNT)
+#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D0_CURR_Y_COUNT()     bfin_read16(MDMA_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D0_IRQ_STATUS()       bfin_read16(MDMA_D0_IRQ_STATUS)
+#define bfin_write_MDMA_D0_IRQ_STATUS(val)   bfin_write16(MDMA_D0_IRQ_STATUS,val)
+#define bfin_read_MDMA_D0_PERIPHERAL_MAP()   bfin_read16(MDMA_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_S0_CONFIG()           bfin_read16(MDMA_S0_CONFIG)
+#define bfin_write_MDMA_S0_CONFIG(val)       bfin_write16(MDMA_S0_CONFIG,val)
+#define bfin_read_MDMA_S0_NEXT_DESC_PTR()    bfin_read32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S0_START_ADDR()       bfin_read32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val)   bfin_write32(MDMA_S0_START_ADDR,val)
+#define bfin_read_MDMA_S0_X_COUNT()          bfin_read16(MDMA_S0_X_COUNT)
+#define bfin_write_MDMA_S0_X_COUNT(val)      bfin_write16(MDMA_S0_X_COUNT,val)
+#define bfin_read_MDMA_S0_Y_COUNT()          bfin_read16(MDMA_S0_Y_COUNT)
+#define bfin_write_MDMA_S0_Y_COUNT(val)      bfin_write16(MDMA_S0_Y_COUNT,val)
+#define bfin_read_MDMA_S0_X_MODIFY()         bfin_read16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val)     bfin_write16(MDMA_S0_X_MODIFY,val)
+#define bfin_read_MDMA_S0_Y_MODIFY()         bfin_read16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val)     bfin_write16(MDMA_S0_Y_MODIFY,val)
+#define bfin_read_MDMA_S0_CURR_DESC_PTR()    bfin_read32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S0_CURR_ADDR()        bfin_read32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val)    bfin_write32(MDMA_S0_CURR_ADDR,val)
+#define bfin_read_MDMA_S0_CURR_X_COUNT()     bfin_read16(MDMA_S0_CURR_X_COUNT)
+#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S0_CURR_Y_COUNT()     bfin_read16(MDMA_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S0_IRQ_STATUS()       bfin_read16(MDMA_S0_IRQ_STATUS)
+#define bfin_write_MDMA_S0_IRQ_STATUS(val)   bfin_write16(MDMA_S0_IRQ_STATUS,val)
+#define bfin_read_MDMA_S0_PERIPHERAL_MAP()   bfin_read16(MDMA_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_D1_CONFIG()           bfin_read16(MDMA_D1_CONFIG)
+#define bfin_write_MDMA_D1_CONFIG(val)       bfin_write16(MDMA_D1_CONFIG,val)
+#define bfin_read_MDMA_D1_NEXT_DESC_PTR()    bfin_read32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D1_START_ADDR()       bfin_read32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val)   bfin_write32(MDMA_D1_START_ADDR,val)
+#define bfin_read_MDMA_D1_X_COUNT()          bfin_read16(MDMA_D1_X_COUNT)
+#define bfin_write_MDMA_D1_X_COUNT(val)      bfin_write16(MDMA_D1_X_COUNT,val)
+#define bfin_read_MDMA_D1_Y_COUNT()          bfin_read16(MDMA_D1_Y_COUNT)
+#define bfin_write_MDMA_D1_Y_COUNT(val)      bfin_write16(MDMA_D1_Y_COUNT,val)
+#define bfin_read_MDMA_D1_X_MODIFY()         bfin_read16(MDMA_D1_X_MODIFY)
+#define bfin_write_MDMA_D1_X_MODIFY(val)     bfin_write16(MDMA_D1_X_MODIFY,val)
+#define bfin_read_MDMA_D1_Y_MODIFY()         bfin_read16(MDMA_D1_Y_MODIFY)
+#define bfin_write_MDMA_D1_Y_MODIFY(val)     bfin_write16(MDMA_D1_Y_MODIFY,val)
+#define bfin_read_MDMA_D1_CURR_DESC_PTR()    bfin_read32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D1_CURR_ADDR()        bfin_read32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val)    bfin_write32(MDMA_D1_CURR_ADDR,val)
+#define bfin_read_MDMA_D1_CURR_X_COUNT()     bfin_read16(MDMA_D1_CURR_X_COUNT)
+#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D1_CURR_Y_COUNT()     bfin_read16(MDMA_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()       bfin_read16(MDMA_D1_IRQ_STATUS)
+#define bfin_write_MDMA_D1_IRQ_STATUS(val)   bfin_write16(MDMA_D1_IRQ_STATUS,val)
+#define bfin_read_MDMA_D1_PERIPHERAL_MAP()   bfin_read16(MDMA_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_S1_CONFIG()           bfin_read16(MDMA_S1_CONFIG)
+#define bfin_write_MDMA_S1_CONFIG(val)       bfin_write16(MDMA_S1_CONFIG,val)
+#define bfin_read_MDMA_S1_NEXT_DESC_PTR()    bfin_read32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S1_START_ADDR()       bfin_read32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val)   bfin_write32(MDMA_S1_START_ADDR,val)
+#define bfin_read_MDMA_S1_X_COUNT()          bfin_read16(MDMA_S1_X_COUNT)
+#define bfin_write_MDMA_S1_X_COUNT(val)      bfin_write16(MDMA_S1_X_COUNT,val)
+#define bfin_read_MDMA_S1_Y_COUNT()          bfin_read16(MDMA_S1_Y_COUNT)
+#define bfin_write_MDMA_S1_Y_COUNT(val)      bfin_write16(MDMA_S1_Y_COUNT,val)
+#define bfin_read_MDMA_S1_X_MODIFY()         bfin_read16(MDMA_S1_X_MODIFY)
+#define bfin_write_MDMA_S1_X_MODIFY(val)     bfin_write16(MDMA_S1_X_MODIFY,val)
+#define bfin_read_MDMA_S1_Y_MODIFY()         bfin_read16(MDMA_S1_Y_MODIFY)
+#define bfin_write_MDMA_S1_Y_MODIFY(val)     bfin_write16(MDMA_S1_Y_MODIFY,val)
+#define bfin_read_MDMA_S1_CURR_DESC_PTR()    bfin_read32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S1_CURR_ADDR()        bfin_read32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val)    bfin_write32(MDMA_S1_CURR_ADDR,val)
+#define bfin_read_MDMA_S1_CURR_X_COUNT()     bfin_read16(MDMA_S1_CURR_X_COUNT)
+#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S1_CURR_Y_COUNT()     bfin_read16(MDMA_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()       bfin_read16(MDMA_S1_IRQ_STATUS)
+#define bfin_write_MDMA_S1_IRQ_STATUS(val)   bfin_write16(MDMA_S1_IRQ_STATUS,val)
+#define bfin_read_MDMA_S1_PERIPHERAL_MAP()   bfin_read16(MDMA_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP,val)
+
+/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF)							*/
+#define bfin_read_PPI_CONTROL()              bfin_read16(PPI_CONTROL)
+#define bfin_write_PPI_CONTROL(val)          bfin_write16(PPI_CONTROL,val)
+#define bfin_read_PPI_STATUS()               bfin_read16(PPI_STATUS)
+#define bfin_write_PPI_STATUS(val)           bfin_write16(PPI_STATUS,val)
+#define bfin_clear_PPI_STATUS()              bfin_write_PPI_STATUS(0xFFFF)
+#define bfin_read_PPI_DELAY()                bfin_read16(PPI_DELAY)
+#define bfin_write_PPI_DELAY(val)            bfin_write16(PPI_DELAY,val)
+#define bfin_read_PPI_COUNT()                bfin_read16(PPI_COUNT)
+#define bfin_write_PPI_COUNT(val)            bfin_write16(PPI_COUNT,val)
+#define bfin_read_PPI_FRAME()                bfin_read16(PPI_FRAME)
+#define bfin_write_PPI_FRAME(val)            bfin_write16(PPI_FRAME,val)
+
+/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
+
+/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)								*/
+#define bfin_read_PORTGIO()                  bfin_read16(PORTGIO)
+#define bfin_write_PORTGIO(val)              bfin_write16(PORTGIO,val)
+#define bfin_read_PORTGIO_CLEAR()            bfin_read16(PORTGIO_CLEAR)
+#define bfin_write_PORTGIO_CLEAR(val)        bfin_write16(PORTGIO_CLEAR,val)
+#define bfin_read_PORTGIO_SET()              bfin_read16(PORTGIO_SET)
+#define bfin_write_PORTGIO_SET(val)          bfin_write16(PORTGIO_SET,val)
+#define bfin_read_PORTGIO_TOGGLE()           bfin_read16(PORTGIO_TOGGLE)
+#define bfin_write_PORTGIO_TOGGLE(val)       bfin_write16(PORTGIO_TOGGLE,val)
+#define bfin_read_PORTGIO_MASKA()            bfin_read16(PORTGIO_MASKA)
+#define bfin_write_PORTGIO_MASKA(val)        bfin_write16(PORTGIO_MASKA,val)
+#define bfin_read_PORTGIO_MASKA_CLEAR()      bfin_read16(PORTGIO_MASKA_CLEAR)
+#define bfin_write_PORTGIO_MASKA_CLEAR(val)  bfin_write16(PORTGIO_MASKA_CLEAR,val)
+#define bfin_read_PORTGIO_MASKA_SET()        bfin_read16(PORTGIO_MASKA_SET)
+#define bfin_write_PORTGIO_MASKA_SET(val)    bfin_write16(PORTGIO_MASKA_SET,val)
+#define bfin_read_PORTGIO_MASKA_TOGGLE()     bfin_read16(PORTGIO_MASKA_TOGGLE)
+#define bfin_write_PORTGIO_MASKA_TOGGLE(val) bfin_write16(PORTGIO_MASKA_TOGGLE,val)
+#define bfin_read_PORTGIO_MASKB()            bfin_read16(PORTGIO_MASKB)
+#define bfin_write_PORTGIO_MASKB(val)        bfin_write16(PORTGIO_MASKB,val)
+#define bfin_read_PORTGIO_MASKB_CLEAR()      bfin_read16(PORTGIO_MASKB_CLEAR)
+#define bfin_write_PORTGIO_MASKB_CLEAR(val)  bfin_write16(PORTGIO_MASKB_CLEAR,val)
+#define bfin_read_PORTGIO_MASKB_SET()        bfin_read16(PORTGIO_MASKB_SET)
+#define bfin_write_PORTGIO_MASKB_SET(val)    bfin_write16(PORTGIO_MASKB_SET,val)
+#define bfin_read_PORTGIO_MASKB_TOGGLE()     bfin_read16(PORTGIO_MASKB_TOGGLE)
+#define bfin_write_PORTGIO_MASKB_TOGGLE(val) bfin_write16(PORTGIO_MASKB_TOGGLE,val)
+#define bfin_read_PORTGIO_DIR()              bfin_read16(PORTGIO_DIR)
+#define bfin_write_PORTGIO_DIR(val)          bfin_write16(PORTGIO_DIR,val)
+#define bfin_read_PORTGIO_POLAR()            bfin_read16(PORTGIO_POLAR)
+#define bfin_write_PORTGIO_POLAR(val)        bfin_write16(PORTGIO_POLAR,val)
+#define bfin_read_PORTGIO_EDGE()             bfin_read16(PORTGIO_EDGE)
+#define bfin_write_PORTGIO_EDGE(val)         bfin_write16(PORTGIO_EDGE,val)
+#define bfin_read_PORTGIO_BOTH()             bfin_read16(PORTGIO_BOTH)
+#define bfin_write_PORTGIO_BOTH(val)         bfin_write16(PORTGIO_BOTH,val)
+#define bfin_read_PORTGIO_INEN()             bfin_read16(PORTGIO_INEN)
+#define bfin_write_PORTGIO_INEN(val)         bfin_write16(PORTGIO_INEN,val)
+
+/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF)								*/
+#define bfin_read_PORTHIO()                  bfin_read16(PORTHIO)
+#define bfin_write_PORTHIO(val)              bfin_write16(PORTHIO,val)
+#define bfin_read_PORTHIO_CLEAR()            bfin_read16(PORTHIO_CLEAR)
+#define bfin_write_PORTHIO_CLEAR(val)        bfin_write16(PORTHIO_CLEAR,val)
+#define bfin_read_PORTHIO_SET()              bfin_read16(PORTHIO_SET)
+#define bfin_write_PORTHIO_SET(val)          bfin_write16(PORTHIO_SET,val)
+#define bfin_read_PORTHIO_TOGGLE()           bfin_read16(PORTHIO_TOGGLE)
+#define bfin_write_PORTHIO_TOGGLE(val)       bfin_write16(PORTHIO_TOGGLE,val)
+#define bfin_read_PORTHIO_MASKA()            bfin_read16(PORTHIO_MASKA)
+#define bfin_write_PORTHIO_MASKA(val)        bfin_write16(PORTHIO_MASKA,val)
+#define bfin_read_PORTHIO_MASKA_CLEAR()      bfin_read16(PORTHIO_MASKA_CLEAR)
+#define bfin_write_PORTHIO_MASKA_CLEAR(val)  bfin_write16(PORTHIO_MASKA_CLEAR,val)
+#define bfin_read_PORTHIO_MASKA_SET()        bfin_read16(PORTHIO_MASKA_SET)
+#define bfin_write_PORTHIO_MASKA_SET(val)    bfin_write16(PORTHIO_MASKA_SET,val)
+#define bfin_read_PORTHIO_MASKA_TOGGLE()     bfin_read16(PORTHIO_MASKA_TOGGLE)
+#define bfin_write_PORTHIO_MASKA_TOGGLE(val) bfin_write16(PORTHIO_MASKA_TOGGLE,val)
+#define bfin_read_PORTHIO_MASKB()            bfin_read16(PORTHIO_MASKB)
+#define bfin_write_PORTHIO_MASKB(val)        bfin_write16(PORTHIO_MASKB,val)
+#define bfin_read_PORTHIO_MASKB_CLEAR()      bfin_read16(PORTHIO_MASKB_CLEAR)
+#define bfin_write_PORTHIO_MASKB_CLEAR(val)  bfin_write16(PORTHIO_MASKB_CLEAR,val)
+#define bfin_read_PORTHIO_MASKB_SET()        bfin_read16(PORTHIO_MASKB_SET)
+#define bfin_write_PORTHIO_MASKB_SET(val)    bfin_write16(PORTHIO_MASKB_SET,val)
+#define bfin_read_PORTHIO_MASKB_TOGGLE()     bfin_read16(PORTHIO_MASKB_TOGGLE)
+#define bfin_write_PORTHIO_MASKB_TOGGLE(val) bfin_write16(PORTHIO_MASKB_TOGGLE,val)
+#define bfin_read_PORTHIO_DIR()              bfin_read16(PORTHIO_DIR)
+#define bfin_write_PORTHIO_DIR(val)          bfin_write16(PORTHIO_DIR,val)
+#define bfin_read_PORTHIO_POLAR()            bfin_read16(PORTHIO_POLAR)
+#define bfin_write_PORTHIO_POLAR(val)        bfin_write16(PORTHIO_POLAR,val)
+#define bfin_read_PORTHIO_EDGE()             bfin_read16(PORTHIO_EDGE)
+#define bfin_write_PORTHIO_EDGE(val)         bfin_write16(PORTHIO_EDGE,val)
+#define bfin_read_PORTHIO_BOTH()             bfin_read16(PORTHIO_BOTH)
+#define bfin_write_PORTHIO_BOTH(val)         bfin_write16(PORTHIO_BOTH,val)
+#define bfin_read_PORTHIO_INEN()             bfin_read16(PORTHIO_INEN)
+#define bfin_write_PORTHIO_INEN(val)         bfin_write16(PORTHIO_INEN,val)
+
+/* UART1 Controller		(0xFFC02000 - 0xFFC020FF)								*/
+#define bfin_read_UART1_THR()                bfin_read16(UART1_THR)
+#define bfin_write_UART1_THR(val)            bfin_write16(UART1_THR,val)
+#define bfin_read_UART1_RBR()                bfin_read16(UART1_RBR)
+#define bfin_write_UART1_RBR(val)            bfin_write16(UART1_RBR,val)
+#define bfin_read_UART1_DLL()                bfin_read16(UART1_DLL)
+#define bfin_write_UART1_DLL(val)            bfin_write16(UART1_DLL,val)
+#define bfin_read_UART1_IER()                bfin_read16(UART1_IER)
+#define bfin_write_UART1_IER(val)            bfin_write16(UART1_IER,val)
+#define bfin_read_UART1_DLH()                bfin_read16(UART1_DLH)
+#define bfin_write_UART1_DLH(val)            bfin_write16(UART1_DLH,val)
+#define bfin_read_UART1_IIR()                bfin_read16(UART1_IIR)
+#define bfin_write_UART1_IIR(val)            bfin_write16(UART1_IIR,val)
+#define bfin_read_UART1_LCR()                bfin_read16(UART1_LCR)
+#define bfin_write_UART1_LCR(val)            bfin_write16(UART1_LCR,val)
+#define bfin_read_UART1_MCR()                bfin_read16(UART1_MCR)
+#define bfin_write_UART1_MCR(val)            bfin_write16(UART1_MCR,val)
+#define bfin_read_UART1_LSR()                bfin_read16(UART1_LSR)
+#define bfin_write_UART1_LSR(val)            bfin_write16(UART1_LSR,val)
+#define bfin_read_UART1_MSR()                bfin_read16(UART1_MSR)
+#define bfin_write_UART1_MSR(val)            bfin_write16(UART1_MSR,val)
+#define bfin_read_UART1_SCR()                bfin_read16(UART1_SCR)
+#define bfin_write_UART1_SCR(val)            bfin_write16(UART1_SCR,val)
+#define bfin_read_UART1_GCTL()               bfin_read16(UART1_GCTL)
+#define bfin_write_UART1_GCTL(val)           bfin_write16(UART1_GCTL,val)
+
+/* CAN Controller		(0xFFC02A00 - 0xFFC02FFF)								*/
+/* For Mailboxes 0-15 */
+#define bfin_read_CAN_MC1()                  bfin_read16(CAN_MC1)
+#define bfin_write_CAN_MC1(val)              bfin_write16(CAN_MC1,val)
+#define bfin_read_CAN_MD1()                  bfin_read16(CAN_MD1)
+#define bfin_write_CAN_MD1(val)              bfin_write16(CAN_MD1,val)
+#define bfin_read_CAN_TRS1()                 bfin_read16(CAN_TRS1)
+#define bfin_write_CAN_TRS1(val)             bfin_write16(CAN_TRS1,val)
+#define bfin_read_CAN_TRR1()                 bfin_read16(CAN_TRR1)
+#define bfin_write_CAN_TRR1(val)             bfin_write16(CAN_TRR1,val)
+#define bfin_read_CAN_TA1()                  bfin_read16(CAN_TA1)
+#define bfin_write_CAN_TA1(val)              bfin_write16(CAN_TA1,val)
+#define bfin_read_CAN_AA1()                  bfin_read16(CAN_AA1)
+#define bfin_write_CAN_AA1(val)              bfin_write16(CAN_AA1,val)
+#define bfin_read_CAN_RMP1()                 bfin_read16(CAN_RMP1)
+#define bfin_write_CAN_RMP1(val)             bfin_write16(CAN_RMP1,val)
+#define bfin_read_CAN_RML1()                 bfin_read16(CAN_RML1)
+#define bfin_write_CAN_RML1(val)             bfin_write16(CAN_RML1,val)
+#define bfin_read_CAN_MBTIF1()               bfin_read16(CAN_MBTIF1)
+#define bfin_write_CAN_MBTIF1(val)           bfin_write16(CAN_MBTIF1,val)
+#define bfin_read_CAN_MBRIF1()               bfin_read16(CAN_MBRIF1)
+#define bfin_write_CAN_MBRIF1(val)           bfin_write16(CAN_MBRIF1,val)
+#define bfin_read_CAN_MBIM1()                bfin_read16(CAN_MBIM1)
+#define bfin_write_CAN_MBIM1(val)            bfin_write16(CAN_MBIM1,val)
+#define bfin_read_CAN_RFH1()                 bfin_read16(CAN_RFH1)
+#define bfin_write_CAN_RFH1(val)             bfin_write16(CAN_RFH1,val)
+#define bfin_read_CAN_OPSS1()                bfin_read16(CAN_OPSS1)
+#define bfin_write_CAN_OPSS1(val)            bfin_write16(CAN_OPSS1,val)
+
+/* For Mailboxes 16-31 */
+#define bfin_read_CAN_MC2()                  bfin_read16(CAN_MC2)
+#define bfin_write_CAN_MC2(val)              bfin_write16(CAN_MC2,val)
+#define bfin_read_CAN_MD2()                  bfin_read16(CAN_MD2)
+#define bfin_write_CAN_MD2(val)              bfin_write16(CAN_MD2,val)
+#define bfin_read_CAN_TRS2()                 bfin_read16(CAN_TRS2)
+#define bfin_write_CAN_TRS2(val)             bfin_write16(CAN_TRS2,val)
+#define bfin_read_CAN_TRR2()                 bfin_read16(CAN_TRR2)
+#define bfin_write_CAN_TRR2(val)             bfin_write16(CAN_TRR2,val)
+#define bfin_read_CAN_TA2()                  bfin_read16(CAN_TA2)
+#define bfin_write_CAN_TA2(val)              bfin_write16(CAN_TA2,val)
+#define bfin_read_CAN_AA2()                  bfin_read16(CAN_AA2)
+#define bfin_write_CAN_AA2(val)              bfin_write16(CAN_AA2,val)
+#define bfin_read_CAN_RMP2()                 bfin_read16(CAN_RMP2)
+#define bfin_write_CAN_RMP2(val)             bfin_write16(CAN_RMP2,val)
+#define bfin_read_CAN_RML2()                 bfin_read16(CAN_RML2)
+#define bfin_write_CAN_RML2(val)             bfin_write16(CAN_RML2,val)
+#define bfin_read_CAN_MBTIF2()               bfin_read16(CAN_MBTIF2)
+#define bfin_write_CAN_MBTIF2(val)           bfin_write16(CAN_MBTIF2,val)
+#define bfin_read_CAN_MBRIF2()               bfin_read16(CAN_MBRIF2)
+#define bfin_write_CAN_MBRIF2(val)           bfin_write16(CAN_MBRIF2,val)
+#define bfin_read_CAN_MBIM2()                bfin_read16(CAN_MBIM2)
+#define bfin_write_CAN_MBIM2(val)            bfin_write16(CAN_MBIM2,val)
+#define bfin_read_CAN_RFH2()                 bfin_read16(CAN_RFH2)
+#define bfin_write_CAN_RFH2(val)             bfin_write16(CAN_RFH2,val)
+#define bfin_read_CAN_OPSS2()                bfin_read16(CAN_OPSS2)
+#define bfin_write_CAN_OPSS2(val)            bfin_write16(CAN_OPSS2,val)
+
+#define bfin_read_CAN_CLOCK()                bfin_read16(CAN_CLOCK)
+#define bfin_write_CAN_CLOCK(val)            bfin_write16(CAN_CLOCK,val)
+#define bfin_read_CAN_TIMING()               bfin_read16(CAN_TIMING)
+#define bfin_write_CAN_TIMING(val)           bfin_write16(CAN_TIMING,val)
+#define bfin_read_CAN_DEBUG()                bfin_read16(CAN_DEBUG)
+#define bfin_write_CAN_DEBUG(val)            bfin_write16(CAN_DEBUG,val)
+#define bfin_read_CAN_STATUS()               bfin_read16(CAN_STATUS)
+#define bfin_write_CAN_STATUS(val)           bfin_write16(CAN_STATUS,val)
+#define bfin_read_CAN_CEC()                  bfin_read16(CAN_CEC)
+#define bfin_write_CAN_CEC(val)              bfin_write16(CAN_CEC,val)
+#define bfin_read_CAN_GIS()                  bfin_read16(CAN_GIS)
+#define bfin_write_CAN_GIS(val)              bfin_write16(CAN_GIS,val)
+#define bfin_read_CAN_GIM()                  bfin_read16(CAN_GIM)
+#define bfin_write_CAN_GIM(val)              bfin_write16(CAN_GIM,val)
+#define bfin_read_CAN_GIF()                  bfin_read16(CAN_GIF)
+#define bfin_write_CAN_GIF(val)              bfin_write16(CAN_GIF,val)
+#define bfin_read_CAN_CONTROL()              bfin_read16(CAN_CONTROL)
+#define bfin_write_CAN_CONTROL(val)          bfin_write16(CAN_CONTROL,val)
+#define bfin_read_CAN_INTR()                 bfin_read16(CAN_INTR)
+#define bfin_write_CAN_INTR(val)             bfin_write16(CAN_INTR,val)
+#define bfin_read_CAN_SFCMVER()              bfin_read16(CAN_SFCMVER)
+#define bfin_write_CAN_SFCMVER(val)          bfin_write16(CAN_SFCMVER,val)
+#define bfin_read_CAN_MBTD()                 bfin_read16(CAN_MBTD)
+#define bfin_write_CAN_MBTD(val)             bfin_write16(CAN_MBTD,val)
+#define bfin_read_CAN_EWR()                  bfin_read16(CAN_EWR)
+#define bfin_write_CAN_EWR(val)              bfin_write16(CAN_EWR,val)
+#define bfin_read_CAN_ESR()                  bfin_read16(CAN_ESR)
+#define bfin_write_CAN_ESR(val)              bfin_write16(CAN_ESR,val)
+#define bfin_read_CAN_UCREG()                bfin_read16(CAN_UCREG)
+#define bfin_write_CAN_UCREG(val)            bfin_write16(CAN_UCREG,val)
+#define bfin_read_CAN_UCCNT()                bfin_read16(CAN_UCCNT)
+#define bfin_write_CAN_UCCNT(val)            bfin_write16(CAN_UCCNT,val)
+#define bfin_read_CAN_UCRC()                 bfin_read16(CAN_UCRC)
+#define bfin_write_CAN_UCRC(val)             bfin_write16(CAN_UCRC,val)
+#define bfin_read_CAN_UCCNF()                bfin_read16(CAN_UCCNF)
+#define bfin_write_CAN_UCCNF(val)            bfin_write16(CAN_UCCNF,val)
+
+/* Mailbox Acceptance Masks */
+#define bfin_read_CAN_AM00L()                bfin_read16(CAN_AM00L)
+#define bfin_write_CAN_AM00L(val)            bfin_write16(CAN_AM00L,val)
+#define bfin_read_CAN_AM00H()                bfin_read16(CAN_AM00H)
+#define bfin_write_CAN_AM00H(val)            bfin_write16(CAN_AM00H,val)
+#define bfin_read_CAN_AM01L()                bfin_read16(CAN_AM01L)
+#define bfin_write_CAN_AM01L(val)            bfin_write16(CAN_AM01L,val)
+#define bfin_read_CAN_AM01H()                bfin_read16(CAN_AM01H)
+#define bfin_write_CAN_AM01H(val)            bfin_write16(CAN_AM01H,val)
+#define bfin_read_CAN_AM02L()                bfin_read16(CAN_AM02L)
+#define bfin_write_CAN_AM02L(val)            bfin_write16(CAN_AM02L,val)
+#define bfin_read_CAN_AM02H()                bfin_read16(CAN_AM02H)
+#define bfin_write_CAN_AM02H(val)            bfin_write16(CAN_AM02H,val)
+#define bfin_read_CAN_AM03L()                bfin_read16(CAN_AM03L)
+#define bfin_write_CAN_AM03L(val)            bfin_write16(CAN_AM03L,val)
+#define bfin_read_CAN_AM03H()                bfin_read16(CAN_AM03H)
+#define bfin_write_CAN_AM03H(val)            bfin_write16(CAN_AM03H,val)
+#define bfin_read_CAN_AM04L()                bfin_read16(CAN_AM04L)
+#define bfin_write_CAN_AM04L(val)            bfin_write16(CAN_AM04L,val)
+#define bfin_read_CAN_AM04H()                bfin_read16(CAN_AM04H)
+#define bfin_write_CAN_AM04H(val)            bfin_write16(CAN_AM04H,val)
+#define bfin_read_CAN_AM05L()                bfin_read16(CAN_AM05L)
+#define bfin_write_CAN_AM05L(val)            bfin_write16(CAN_AM05L,val)
+#define bfin_read_CAN_AM05H()                bfin_read16(CAN_AM05H)
+#define bfin_write_CAN_AM05H(val)            bfin_write16(CAN_AM05H,val)
+#define bfin_read_CAN_AM06L()                bfin_read16(CAN_AM06L)
+#define bfin_write_CAN_AM06L(val)            bfin_write16(CAN_AM06L,val)
+#define bfin_read_CAN_AM06H()                bfin_read16(CAN_AM06H)
+#define bfin_write_CAN_AM06H(val)            bfin_write16(CAN_AM06H,val)
+#define bfin_read_CAN_AM07L()                bfin_read16(CAN_AM07L)
+#define bfin_write_CAN_AM07L(val)            bfin_write16(CAN_AM07L,val)
+#define bfin_read_CAN_AM07H()                bfin_read16(CAN_AM07H)
+#define bfin_write_CAN_AM07H(val)            bfin_write16(CAN_AM07H,val)
+#define bfin_read_CAN_AM08L()                bfin_read16(CAN_AM08L)
+#define bfin_write_CAN_AM08L(val)            bfin_write16(CAN_AM08L,val)
+#define bfin_read_CAN_AM08H()                bfin_read16(CAN_AM08H)
+#define bfin_write_CAN_AM08H(val)            bfin_write16(CAN_AM08H,val)
+#define bfin_read_CAN_AM09L()                bfin_read16(CAN_AM09L)
+#define bfin_write_CAN_AM09L(val)            bfin_write16(CAN_AM09L,val)
+#define bfin_read_CAN_AM09H()                bfin_read16(CAN_AM09H)
+#define bfin_write_CAN_AM09H(val)            bfin_write16(CAN_AM09H,val)
+#define bfin_read_CAN_AM10L()                bfin_read16(CAN_AM10L)
+#define bfin_write_CAN_AM10L(val)            bfin_write16(CAN_AM10L,val)
+#define bfin_read_CAN_AM10H()                bfin_read16(CAN_AM10H)
+#define bfin_write_CAN_AM10H(val)            bfin_write16(CAN_AM10H,val)
+#define bfin_read_CAN_AM11L()                bfin_read16(CAN_AM11L)
+#define bfin_write_CAN_AM11L(val)            bfin_write16(CAN_AM11L,val)
+#define bfin_read_CAN_AM11H()                bfin_read16(CAN_AM11H)
+#define bfin_write_CAN_AM11H(val)            bfin_write16(CAN_AM11H,val)
+#define bfin_read_CAN_AM12L()                bfin_read16(CAN_AM12L)
+#define bfin_write_CAN_AM12L(val)            bfin_write16(CAN_AM12L,val)
+#define bfin_read_CAN_AM12H()                bfin_read16(CAN_AM12H)
+#define bfin_write_CAN_AM12H(val)            bfin_write16(CAN_AM12H,val)
+#define bfin_read_CAN_AM13L()                bfin_read16(CAN_AM13L)
+#define bfin_write_CAN_AM13L(val)            bfin_write16(CAN_AM13L,val)
+#define bfin_read_CAN_AM13H()                bfin_read16(CAN_AM13H)
+#define bfin_write_CAN_AM13H(val)            bfin_write16(CAN_AM13H,val)
+#define bfin_read_CAN_AM14L()                bfin_read16(CAN_AM14L)
+#define bfin_write_CAN_AM14L(val)            bfin_write16(CAN_AM14L,val)
+#define bfin_read_CAN_AM14H()                bfin_read16(CAN_AM14H)
+#define bfin_write_CAN_AM14H(val)            bfin_write16(CAN_AM14H,val)
+#define bfin_read_CAN_AM15L()                bfin_read16(CAN_AM15L)
+#define bfin_write_CAN_AM15L(val)            bfin_write16(CAN_AM15L,val)
+#define bfin_read_CAN_AM15H()                bfin_read16(CAN_AM15H)
+#define bfin_write_CAN_AM15H(val)            bfin_write16(CAN_AM15H,val)
+
+#define bfin_read_CAN_AM16L()                bfin_read16(CAN_AM16L)
+#define bfin_write_CAN_AM16L(val)            bfin_write16(CAN_AM16L,val)
+#define bfin_read_CAN_AM16H()                bfin_read16(CAN_AM16H)
+#define bfin_write_CAN_AM16H(val)            bfin_write16(CAN_AM16H,val)
+#define bfin_read_CAN_AM17L()                bfin_read16(CAN_AM17L)
+#define bfin_write_CAN_AM17L(val)            bfin_write16(CAN_AM17L,val)
+#define bfin_read_CAN_AM17H()                bfin_read16(CAN_AM17H)
+#define bfin_write_CAN_AM17H(val)            bfin_write16(CAN_AM17H,val)
+#define bfin_read_CAN_AM18L()                bfin_read16(CAN_AM18L)
+#define bfin_write_CAN_AM18L(val)            bfin_write16(CAN_AM18L,val)
+#define bfin_read_CAN_AM18H()                bfin_read16(CAN_AM18H)
+#define bfin_write_CAN_AM18H(val)            bfin_write16(CAN_AM18H,val)
+#define bfin_read_CAN_AM19L()                bfin_read16(CAN_AM19L)
+#define bfin_write_CAN_AM19L(val)            bfin_write16(CAN_AM19L,val)
+#define bfin_read_CAN_AM19H()                bfin_read16(CAN_AM19H)
+#define bfin_write_CAN_AM19H(val)            bfin_write16(CAN_AM19H,val)
+#define bfin_read_CAN_AM20L()                bfin_read16(CAN_AM20L)
+#define bfin_write_CAN_AM20L(val)            bfin_write16(CAN_AM20L,val)
+#define bfin_read_CAN_AM20H()                bfin_read16(CAN_AM20H)
+#define bfin_write_CAN_AM20H(val)            bfin_write16(CAN_AM20H,val)
+#define bfin_read_CAN_AM21L()                bfin_read16(CAN_AM21L)
+#define bfin_write_CAN_AM21L(val)            bfin_write16(CAN_AM21L,val)
+#define bfin_read_CAN_AM21H()                bfin_read16(CAN_AM21H)
+#define bfin_write_CAN_AM21H(val)            bfin_write16(CAN_AM21H,val)
+#define bfin_read_CAN_AM22L()                bfin_read16(CAN_AM22L)
+#define bfin_write_CAN_AM22L(val)            bfin_write16(CAN_AM22L,val)
+#define bfin_read_CAN_AM22H()                bfin_read16(CAN_AM22H)
+#define bfin_write_CAN_AM22H(val)            bfin_write16(CAN_AM22H,val)
+#define bfin_read_CAN_AM23L()                bfin_read16(CAN_AM23L)
+#define bfin_write_CAN_AM23L(val)            bfin_write16(CAN_AM23L,val)
+#define bfin_read_CAN_AM23H()                bfin_read16(CAN_AM23H)
+#define bfin_write_CAN_AM23H(val)            bfin_write16(CAN_AM23H,val)
+#define bfin_read_CAN_AM24L()                bfin_read16(CAN_AM24L)
+#define bfin_write_CAN_AM24L(val)            bfin_write16(CAN_AM24L,val)
+#define bfin_read_CAN_AM24H()                bfin_read16(CAN_AM24H)
+#define bfin_write_CAN_AM24H(val)            bfin_write16(CAN_AM24H,val)
+#define bfin_read_CAN_AM25L()                bfin_read16(CAN_AM25L)
+#define bfin_write_CAN_AM25L(val)            bfin_write16(CAN_AM25L,val)
+#define bfin_read_CAN_AM25H()                bfin_read16(CAN_AM25H)
+#define bfin_write_CAN_AM25H(val)            bfin_write16(CAN_AM25H,val)
+#define bfin_read_CAN_AM26L()                bfin_read16(CAN_AM26L)
+#define bfin_write_CAN_AM26L(val)            bfin_write16(CAN_AM26L,val)
+#define bfin_read_CAN_AM26H()                bfin_read16(CAN_AM26H)
+#define bfin_write_CAN_AM26H(val)            bfin_write16(CAN_AM26H,val)
+#define bfin_read_CAN_AM27L()                bfin_read16(CAN_AM27L)
+#define bfin_write_CAN_AM27L(val)            bfin_write16(CAN_AM27L,val)
+#define bfin_read_CAN_AM27H()                bfin_read16(CAN_AM27H)
+#define bfin_write_CAN_AM27H(val)            bfin_write16(CAN_AM27H,val)
+#define bfin_read_CAN_AM28L()                bfin_read16(CAN_AM28L)
+#define bfin_write_CAN_AM28L(val)            bfin_write16(CAN_AM28L,val)
+#define bfin_read_CAN_AM28H()                bfin_read16(CAN_AM28H)
+#define bfin_write_CAN_AM28H(val)            bfin_write16(CAN_AM28H,val)
+#define bfin_read_CAN_AM29L()                bfin_read16(CAN_AM29L)
+#define bfin_write_CAN_AM29L(val)            bfin_write16(CAN_AM29L,val)
+#define bfin_read_CAN_AM29H()                bfin_read16(CAN_AM29H)
+#define bfin_write_CAN_AM29H(val)            bfin_write16(CAN_AM29H,val)
+#define bfin_read_CAN_AM30L()                bfin_read16(CAN_AM30L)
+#define bfin_write_CAN_AM30L(val)            bfin_write16(CAN_AM30L,val)
+#define bfin_read_CAN_AM30H()                bfin_read16(CAN_AM30H)
+#define bfin_write_CAN_AM30H(val)            bfin_write16(CAN_AM30H,val)
+#define bfin_read_CAN_AM31L()                bfin_read16(CAN_AM31L)
+#define bfin_write_CAN_AM31L(val)            bfin_write16(CAN_AM31L,val)
+#define bfin_read_CAN_AM31H()                bfin_read16(CAN_AM31H)
+#define bfin_write_CAN_AM31H(val)            bfin_write16(CAN_AM31H,val)
+
+/* CAN Acceptance Mask Area Macros	*/
+#define bfin_read_CAN_AM_L(x)()              bfin_read16(CAN_AM_L(x))
+#define bfin_write_CAN_AM_L(x)(val)          bfin_write16(CAN_AM_L(x),val)
+#define bfin_read_CAN_AM_H(x)()              bfin_read16(CAN_AM_H(x))
+#define bfin_write_CAN_AM_H(x)(val)          bfin_write16(CAN_AM_H(x),val)
+
+/* Mailbox Registers */
+#define bfin_read_CAN_MB00_ID1()             bfin_read16(CAN_MB00_ID1)
+#define bfin_write_CAN_MB00_ID1(val)         bfin_write16(CAN_MB00_ID1,val)
+#define bfin_read_CAN_MB00_ID0()             bfin_read16(CAN_MB00_ID0)
+#define bfin_write_CAN_MB00_ID0(val)         bfin_write16(CAN_MB00_ID0,val)
+#define bfin_read_CAN_MB00_TIMESTAMP()       bfin_read16(CAN_MB00_TIMESTAMP)
+#define bfin_write_CAN_MB00_TIMESTAMP(val)   bfin_write16(CAN_MB00_TIMESTAMP,val)
+#define bfin_read_CAN_MB00_LENGTH()          bfin_read16(CAN_MB00_LENGTH)
+#define bfin_write_CAN_MB00_LENGTH(val)      bfin_write16(CAN_MB00_LENGTH,val)
+#define bfin_read_CAN_MB00_DATA3()           bfin_read16(CAN_MB00_DATA3)
+#define bfin_write_CAN_MB00_DATA3(val)       bfin_write16(CAN_MB00_DATA3,val)
+#define bfin_read_CAN_MB00_DATA2()           bfin_read16(CAN_MB00_DATA2)
+#define bfin_write_CAN_MB00_DATA2(val)       bfin_write16(CAN_MB00_DATA2,val)
+#define bfin_read_CAN_MB00_DATA1()           bfin_read16(CAN_MB00_DATA1)
+#define bfin_write_CAN_MB00_DATA1(val)       bfin_write16(CAN_MB00_DATA1,val)
+#define bfin_read_CAN_MB00_DATA0()           bfin_read16(CAN_MB00_DATA0)
+#define bfin_write_CAN_MB00_DATA0(val)       bfin_write16(CAN_MB00_DATA0,val)
+
+#define bfin_read_CAN_MB01_ID1()             bfin_read16(CAN_MB01_ID1)
+#define bfin_write_CAN_MB01_ID1(val)         bfin_write16(CAN_MB01_ID1,val)
+#define bfin_read_CAN_MB01_ID0()             bfin_read16(CAN_MB01_ID0)
+#define bfin_write_CAN_MB01_ID0(val)         bfin_write16(CAN_MB01_ID0,val)
+#define bfin_read_CAN_MB01_TIMESTAMP()       bfin_read16(CAN_MB01_TIMESTAMP)
+#define bfin_write_CAN_MB01_TIMESTAMP(val)   bfin_write16(CAN_MB01_TIMESTAMP,val)
+#define bfin_read_CAN_MB01_LENGTH()          bfin_read16(CAN_MB01_LENGTH)
+#define bfin_write_CAN_MB01_LENGTH(val)      bfin_write16(CAN_MB01_LENGTH,val)
+#define bfin_read_CAN_MB01_DATA3()           bfin_read16(CAN_MB01_DATA3)
+#define bfin_write_CAN_MB01_DATA3(val)       bfin_write16(CAN_MB01_DATA3,val)
+#define bfin_read_CAN_MB01_DATA2()           bfin_read16(CAN_MB01_DATA2)
+#define bfin_write_CAN_MB01_DATA2(val)       bfin_write16(CAN_MB01_DATA2,val)
+#define bfin_read_CAN_MB01_DATA1()           bfin_read16(CAN_MB01_DATA1)
+#define bfin_write_CAN_MB01_DATA1(val)       bfin_write16(CAN_MB01_DATA1,val)
+#define bfin_read_CAN_MB01_DATA0()           bfin_read16(CAN_MB01_DATA0)
+#define bfin_write_CAN_MB01_DATA0(val)       bfin_write16(CAN_MB01_DATA0,val)
+
+#define bfin_read_CAN_MB02_ID1()             bfin_read16(CAN_MB02_ID1)
+#define bfin_write_CAN_MB02_ID1(val)         bfin_write16(CAN_MB02_ID1,val)
+#define bfin_read_CAN_MB02_ID0()             bfin_read16(CAN_MB02_ID0)
+#define bfin_write_CAN_MB02_ID0(val)         bfin_write16(CAN_MB02_ID0,val)
+#define bfin_read_CAN_MB02_TIMESTAMP()       bfin_read16(CAN_MB02_TIMESTAMP)
+#define bfin_write_CAN_MB02_TIMESTAMP(val)   bfin_write16(CAN_MB02_TIMESTAMP,val)
+#define bfin_read_CAN_MB02_LENGTH()          bfin_read16(CAN_MB02_LENGTH)
+#define bfin_write_CAN_MB02_LENGTH(val)      bfin_write16(CAN_MB02_LENGTH,val)
+#define bfin_read_CAN_MB02_DATA3()           bfin_read16(CAN_MB02_DATA3)
+#define bfin_write_CAN_MB02_DATA3(val)       bfin_write16(CAN_MB02_DATA3,val)
+#define bfin_read_CAN_MB02_DATA2()           bfin_read16(CAN_MB02_DATA2)
+#define bfin_write_CAN_MB02_DATA2(val)       bfin_write16(CAN_MB02_DATA2,val)
+#define bfin_read_CAN_MB02_DATA1()           bfin_read16(CAN_MB02_DATA1)
+#define bfin_write_CAN_MB02_DATA1(val)       bfin_write16(CAN_MB02_DATA1,val)
+#define bfin_read_CAN_MB02_DATA0()           bfin_read16(CAN_MB02_DATA0)
+#define bfin_write_CAN_MB02_DATA0(val)       bfin_write16(CAN_MB02_DATA0,val)
+
+#define bfin_read_CAN_MB03_ID1()             bfin_read16(CAN_MB03_ID1)
+#define bfin_write_CAN_MB03_ID1(val)         bfin_write16(CAN_MB03_ID1,val)
+#define bfin_read_CAN_MB03_ID0()             bfin_read16(CAN_MB03_ID0)
+#define bfin_write_CAN_MB03_ID0(val)         bfin_write16(CAN_MB03_ID0,val)
+#define bfin_read_CAN_MB03_TIMESTAMP()       bfin_read16(CAN_MB03_TIMESTAMP)
+#define bfin_write_CAN_MB03_TIMESTAMP(val)   bfin_write16(CAN_MB03_TIMESTAMP,val)
+#define bfin_read_CAN_MB03_LENGTH()          bfin_read16(CAN_MB03_LENGTH)
+#define bfin_write_CAN_MB03_LENGTH(val)      bfin_write16(CAN_MB03_LENGTH,val)
+#define bfin_read_CAN_MB03_DATA3()           bfin_read16(CAN_MB03_DATA3)
+#define bfin_write_CAN_MB03_DATA3(val)       bfin_write16(CAN_MB03_DATA3,val)
+#define bfin_read_CAN_MB03_DATA2()           bfin_read16(CAN_MB03_DATA2)
+#define bfin_write_CAN_MB03_DATA2(val)       bfin_write16(CAN_MB03_DATA2,val)
+#define bfin_read_CAN_MB03_DATA1()           bfin_read16(CAN_MB03_DATA1)
+#define bfin_write_CAN_MB03_DATA1(val)       bfin_write16(CAN_MB03_DATA1,val)
+#define bfin_read_CAN_MB03_DATA0()           bfin_read16(CAN_MB03_DATA0)
+#define bfin_write_CAN_MB03_DATA0(val)       bfin_write16(CAN_MB03_DATA0,val)
+
+#define bfin_read_CAN_MB04_ID1()             bfin_read16(CAN_MB04_ID1)
+#define bfin_write_CAN_MB04_ID1(val)         bfin_write16(CAN_MB04_ID1,val)
+#define bfin_read_CAN_MB04_ID0()             bfin_read16(CAN_MB04_ID0)
+#define bfin_write_CAN_MB04_ID0(val)         bfin_write16(CAN_MB04_ID0,val)
+#define bfin_read_CAN_MB04_TIMESTAMP()       bfin_read16(CAN_MB04_TIMESTAMP)
+#define bfin_write_CAN_MB04_TIMESTAMP(val)   bfin_write16(CAN_MB04_TIMESTAMP,val)
+#define bfin_read_CAN_MB04_LENGTH()          bfin_read16(CAN_MB04_LENGTH)
+#define bfin_write_CAN_MB04_LENGTH(val)      bfin_write16(CAN_MB04_LENGTH,val)
+#define bfin_read_CAN_MB04_DATA3()           bfin_read16(CAN_MB04_DATA3)
+#define bfin_write_CAN_MB04_DATA3(val)       bfin_write16(CAN_MB04_DATA3,val)
+#define bfin_read_CAN_MB04_DATA2()           bfin_read16(CAN_MB04_DATA2)
+#define bfin_write_CAN_MB04_DATA2(val)       bfin_write16(CAN_MB04_DATA2,val)
+#define bfin_read_CAN_MB04_DATA1()           bfin_read16(CAN_MB04_DATA1)
+#define bfin_write_CAN_MB04_DATA1(val)       bfin_write16(CAN_MB04_DATA1,val)
+#define bfin_read_CAN_MB04_DATA0()           bfin_read16(CAN_MB04_DATA0)
+#define bfin_write_CAN_MB04_DATA0(val)       bfin_write16(CAN_MB04_DATA0,val)
+
+#define bfin_read_CAN_MB05_ID1()             bfin_read16(CAN_MB05_ID1)
+#define bfin_write_CAN_MB05_ID1(val)         bfin_write16(CAN_MB05_ID1,val)
+#define bfin_read_CAN_MB05_ID0()             bfin_read16(CAN_MB05_ID0)
+#define bfin_write_CAN_MB05_ID0(val)         bfin_write16(CAN_MB05_ID0,val)
+#define bfin_read_CAN_MB05_TIMESTAMP()       bfin_read16(CAN_MB05_TIMESTAMP)
+#define bfin_write_CAN_MB05_TIMESTAMP(val)   bfin_write16(CAN_MB05_TIMESTAMP,val)
+#define bfin_read_CAN_MB05_LENGTH()          bfin_read16(CAN_MB05_LENGTH)
+#define bfin_write_CAN_MB05_LENGTH(val)      bfin_write16(CAN_MB05_LENGTH,val)
+#define bfin_read_CAN_MB05_DATA3()           bfin_read16(CAN_MB05_DATA3)
+#define bfin_write_CAN_MB05_DATA3(val)       bfin_write16(CAN_MB05_DATA3,val)
+#define bfin_read_CAN_MB05_DATA2()           bfin_read16(CAN_MB05_DATA2)
+#define bfin_write_CAN_MB05_DATA2(val)       bfin_write16(CAN_MB05_DATA2,val)
+#define bfin_read_CAN_MB05_DATA1()           bfin_read16(CAN_MB05_DATA1)
+#define bfin_write_CAN_MB05_DATA1(val)       bfin_write16(CAN_MB05_DATA1,val)
+#define bfin_read_CAN_MB05_DATA0()           bfin_read16(CAN_MB05_DATA0)
+#define bfin_write_CAN_MB05_DATA0(val)       bfin_write16(CAN_MB05_DATA0,val)
+
+#define bfin_read_CAN_MB06_ID1()             bfin_read16(CAN_MB06_ID1)
+#define bfin_write_CAN_MB06_ID1(val)         bfin_write16(CAN_MB06_ID1,val)
+#define bfin_read_CAN_MB06_ID0()             bfin_read16(CAN_MB06_ID0)
+#define bfin_write_CAN_MB06_ID0(val)         bfin_write16(CAN_MB06_ID0,val)
+#define bfin_read_CAN_MB06_TIMESTAMP()       bfin_read16(CAN_MB06_TIMESTAMP)
+#define bfin_write_CAN_MB06_TIMESTAMP(val)   bfin_write16(CAN_MB06_TIMESTAMP,val)
+#define bfin_read_CAN_MB06_LENGTH()          bfin_read16(CAN_MB06_LENGTH)
+#define bfin_write_CAN_MB06_LENGTH(val)      bfin_write16(CAN_MB06_LENGTH,val)
+#define bfin_read_CAN_MB06_DATA3()           bfin_read16(CAN_MB06_DATA3)
+#define bfin_write_CAN_MB06_DATA3(val)       bfin_write16(CAN_MB06_DATA3,val)
+#define bfin_read_CAN_MB06_DATA2()           bfin_read16(CAN_MB06_DATA2)
+#define bfin_write_CAN_MB06_DATA2(val)       bfin_write16(CAN_MB06_DATA2,val)
+#define bfin_read_CAN_MB06_DATA1()           bfin_read16(CAN_MB06_DATA1)
+#define bfin_write_CAN_MB06_DATA1(val)       bfin_write16(CAN_MB06_DATA1,val)
+#define bfin_read_CAN_MB06_DATA0()           bfin_read16(CAN_MB06_DATA0)
+#define bfin_write_CAN_MB06_DATA0(val)       bfin_write16(CAN_MB06_DATA0,val)
+
+#define bfin_read_CAN_MB07_ID1()             bfin_read16(CAN_MB07_ID1)
+#define bfin_write_CAN_MB07_ID1(val)         bfin_write16(CAN_MB07_ID1,val)
+#define bfin_read_CAN_MB07_ID0()             bfin_read16(CAN_MB07_ID0)
+#define bfin_write_CAN_MB07_ID0(val)         bfin_write16(CAN_MB07_ID0,val)
+#define bfin_read_CAN_MB07_TIMESTAMP()       bfin_read16(CAN_MB07_TIMESTAMP)
+#define bfin_write_CAN_MB07_TIMESTAMP(val)   bfin_write16(CAN_MB07_TIMESTAMP,val)
+#define bfin_read_CAN_MB07_LENGTH()          bfin_read16(CAN_MB07_LENGTH)
+#define bfin_write_CAN_MB07_LENGTH(val)      bfin_write16(CAN_MB07_LENGTH,val)
+#define bfin_read_CAN_MB07_DATA3()           bfin_read16(CAN_MB07_DATA3)
+#define bfin_write_CAN_MB07_DATA3(val)       bfin_write16(CAN_MB07_DATA3,val)
+#define bfin_read_CAN_MB07_DATA2()           bfin_read16(CAN_MB07_DATA2)
+#define bfin_write_CAN_MB07_DATA2(val)       bfin_write16(CAN_MB07_DATA2,val)
+#define bfin_read_CAN_MB07_DATA1()           bfin_read16(CAN_MB07_DATA1)
+#define bfin_write_CAN_MB07_DATA1(val)       bfin_write16(CAN_MB07_DATA1,val)
+#define bfin_read_CAN_MB07_DATA0()           bfin_read16(CAN_MB07_DATA0)
+#define bfin_write_CAN_MB07_DATA0(val)       bfin_write16(CAN_MB07_DATA0,val)
+
+#define bfin_read_CAN_MB08_ID1()             bfin_read16(CAN_MB08_ID1)
+#define bfin_write_CAN_MB08_ID1(val)         bfin_write16(CAN_MB08_ID1,val)
+#define bfin_read_CAN_MB08_ID0()             bfin_read16(CAN_MB08_ID0)
+#define bfin_write_CAN_MB08_ID0(val)         bfin_write16(CAN_MB08_ID0,val)
+#define bfin_read_CAN_MB08_TIMESTAMP()       bfin_read16(CAN_MB08_TIMESTAMP)
+#define bfin_write_CAN_MB08_TIMESTAMP(val)   bfin_write16(CAN_MB08_TIMESTAMP,val)
+#define bfin_read_CAN_MB08_LENGTH()          bfin_read16(CAN_MB08_LENGTH)
+#define bfin_write_CAN_MB08_LENGTH(val)      bfin_write16(CAN_MB08_LENGTH,val)
+#define bfin_read_CAN_MB08_DATA3()           bfin_read16(CAN_MB08_DATA3)
+#define bfin_write_CAN_MB08_DATA3(val)       bfin_write16(CAN_MB08_DATA3,val)
+#define bfin_read_CAN_MB08_DATA2()           bfin_read16(CAN_MB08_DATA2)
+#define bfin_write_CAN_MB08_DATA2(val)       bfin_write16(CAN_MB08_DATA2,val)
+#define bfin_read_CAN_MB08_DATA1()           bfin_read16(CAN_MB08_DATA1)
+#define bfin_write_CAN_MB08_DATA1(val)       bfin_write16(CAN_MB08_DATA1,val)
+#define bfin_read_CAN_MB08_DATA0()           bfin_read16(CAN_MB08_DATA0)
+#define bfin_write_CAN_MB08_DATA0(val)       bfin_write16(CAN_MB08_DATA0,val)
+
+#define bfin_read_CAN_MB09_ID1()             bfin_read16(CAN_MB09_ID1)
+#define bfin_write_CAN_MB09_ID1(val)         bfin_write16(CAN_MB09_ID1,val)
+#define bfin_read_CAN_MB09_ID0()             bfin_read16(CAN_MB09_ID0)
+#define bfin_write_CAN_MB09_ID0(val)         bfin_write16(CAN_MB09_ID0,val)
+#define bfin_read_CAN_MB09_TIMESTAMP()       bfin_read16(CAN_MB09_TIMESTAMP)
+#define bfin_write_CAN_MB09_TIMESTAMP(val)   bfin_write16(CAN_MB09_TIMESTAMP,val)
+#define bfin_read_CAN_MB09_LENGTH()          bfin_read16(CAN_MB09_LENGTH)
+#define bfin_write_CAN_MB09_LENGTH(val)      bfin_write16(CAN_MB09_LENGTH,val)
+#define bfin_read_CAN_MB09_DATA3()           bfin_read16(CAN_MB09_DATA3)
+#define bfin_write_CAN_MB09_DATA3(val)       bfin_write16(CAN_MB09_DATA3,val)
+#define bfin_read_CAN_MB09_DATA2()           bfin_read16(CAN_MB09_DATA2)
+#define bfin_write_CAN_MB09_DATA2(val)       bfin_write16(CAN_MB09_DATA2,val)
+#define bfin_read_CAN_MB09_DATA1()           bfin_read16(CAN_MB09_DATA1)
+#define bfin_write_CAN_MB09_DATA1(val)       bfin_write16(CAN_MB09_DATA1,val)
+#define bfin_read_CAN_MB09_DATA0()           bfin_read16(CAN_MB09_DATA0)
+#define bfin_write_CAN_MB09_DATA0(val)       bfin_write16(CAN_MB09_DATA0,val)
+
+#define bfin_read_CAN_MB10_ID1()             bfin_read16(CAN_MB10_ID1)
+#define bfin_write_CAN_MB10_ID1(val)         bfin_write16(CAN_MB10_ID1,val)
+#define bfin_read_CAN_MB10_ID0()             bfin_read16(CAN_MB10_ID0)
+#define bfin_write_CAN_MB10_ID0(val)         bfin_write16(CAN_MB10_ID0,val)
+#define bfin_read_CAN_MB10_TIMESTAMP()       bfin_read16(CAN_MB10_TIMESTAMP)
+#define bfin_write_CAN_MB10_TIMESTAMP(val)   bfin_write16(CAN_MB10_TIMESTAMP,val)
+#define bfin_read_CAN_MB10_LENGTH()          bfin_read16(CAN_MB10_LENGTH)
+#define bfin_write_CAN_MB10_LENGTH(val)      bfin_write16(CAN_MB10_LENGTH,val)
+#define bfin_read_CAN_MB10_DATA3()           bfin_read16(CAN_MB10_DATA3)
+#define bfin_write_CAN_MB10_DATA3(val)       bfin_write16(CAN_MB10_DATA3,val)
+#define bfin_read_CAN_MB10_DATA2()           bfin_read16(CAN_MB10_DATA2)
+#define bfin_write_CAN_MB10_DATA2(val)       bfin_write16(CAN_MB10_DATA2,val)
+#define bfin_read_CAN_MB10_DATA1()           bfin_read16(CAN_MB10_DATA1)
+#define bfin_write_CAN_MB10_DATA1(val)       bfin_write16(CAN_MB10_DATA1,val)
+#define bfin_read_CAN_MB10_DATA0()           bfin_read16(CAN_MB10_DATA0)
+#define bfin_write_CAN_MB10_DATA0(val)       bfin_write16(CAN_MB10_DATA0,val)
+
+#define bfin_read_CAN_MB11_ID1()             bfin_read16(CAN_MB11_ID1)
+#define bfin_write_CAN_MB11_ID1(val)         bfin_write16(CAN_MB11_ID1,val)
+#define bfin_read_CAN_MB11_ID0()             bfin_read16(CAN_MB11_ID0)
+#define bfin_write_CAN_MB11_ID0(val)         bfin_write16(CAN_MB11_ID0,val)
+#define bfin_read_CAN_MB11_TIMESTAMP()       bfin_read16(CAN_MB11_TIMESTAMP)
+#define bfin_write_CAN_MB11_TIMESTAMP(val)   bfin_write16(CAN_MB11_TIMESTAMP,val)
+#define bfin_read_CAN_MB11_LENGTH()          bfin_read16(CAN_MB11_LENGTH)
+#define bfin_write_CAN_MB11_LENGTH(val)      bfin_write16(CAN_MB11_LENGTH,val)
+#define bfin_read_CAN_MB11_DATA3()           bfin_read16(CAN_MB11_DATA3)
+#define bfin_write_CAN_MB11_DATA3(val)       bfin_write16(CAN_MB11_DATA3,val)
+#define bfin_read_CAN_MB11_DATA2()           bfin_read16(CAN_MB11_DATA2)
+#define bfin_write_CAN_MB11_DATA2(val)       bfin_write16(CAN_MB11_DATA2,val)
+#define bfin_read_CAN_MB11_DATA1()           bfin_read16(CAN_MB11_DATA1)
+#define bfin_write_CAN_MB11_DATA1(val)       bfin_write16(CAN_MB11_DATA1,val)
+#define bfin_read_CAN_MB11_DATA0()           bfin_read16(CAN_MB11_DATA0)
+#define bfin_write_CAN_MB11_DATA0(val)       bfin_write16(CAN_MB11_DATA0,val)
+
+#define bfin_read_CAN_MB12_ID1()             bfin_read16(CAN_MB12_ID1)
+#define bfin_write_CAN_MB12_ID1(val)         bfin_write16(CAN_MB12_ID1,val)
+#define bfin_read_CAN_MB12_ID0()             bfin_read16(CAN_MB12_ID0)
+#define bfin_write_CAN_MB12_ID0(val)         bfin_write16(CAN_MB12_ID0,val)
+#define bfin_read_CAN_MB12_TIMESTAMP()       bfin_read16(CAN_MB12_TIMESTAMP)
+#define bfin_write_CAN_MB12_TIMESTAMP(val)   bfin_write16(CAN_MB12_TIMESTAMP,val)
+#define bfin_read_CAN_MB12_LENGTH()          bfin_read16(CAN_MB12_LENGTH)
+#define bfin_write_CAN_MB12_LENGTH(val)      bfin_write16(CAN_MB12_LENGTH,val)
+#define bfin_read_CAN_MB12_DATA3()           bfin_read16(CAN_MB12_DATA3)
+#define bfin_write_CAN_MB12_DATA3(val)       bfin_write16(CAN_MB12_DATA3,val)
+#define bfin_read_CAN_MB12_DATA2()           bfin_read16(CAN_MB12_DATA2)
+#define bfin_write_CAN_MB12_DATA2(val)       bfin_write16(CAN_MB12_DATA2,val)
+#define bfin_read_CAN_MB12_DATA1()           bfin_read16(CAN_MB12_DATA1)
+#define bfin_write_CAN_MB12_DATA1(val)       bfin_write16(CAN_MB12_DATA1,val)
+#define bfin_read_CAN_MB12_DATA0()           bfin_read16(CAN_MB12_DATA0)
+#define bfin_write_CAN_MB12_DATA0(val)       bfin_write16(CAN_MB12_DATA0,val)
+
+#define bfin_read_CAN_MB13_ID1()             bfin_read16(CAN_MB13_ID1)
+#define bfin_write_CAN_MB13_ID1(val)         bfin_write16(CAN_MB13_ID1,val)
+#define bfin_read_CAN_MB13_ID0()             bfin_read16(CAN_MB13_ID0)
+#define bfin_write_CAN_MB13_ID0(val)         bfin_write16(CAN_MB13_ID0,val)
+#define bfin_read_CAN_MB13_TIMESTAMP()       bfin_read16(CAN_MB13_TIMESTAMP)
+#define bfin_write_CAN_MB13_TIMESTAMP(val)   bfin_write16(CAN_MB13_TIMESTAMP,val)
+#define bfin_read_CAN_MB13_LENGTH()          bfin_read16(CAN_MB13_LENGTH)
+#define bfin_write_CAN_MB13_LENGTH(val)      bfin_write16(CAN_MB13_LENGTH,val)
+#define bfin_read_CAN_MB13_DATA3()           bfin_read16(CAN_MB13_DATA3)
+#define bfin_write_CAN_MB13_DATA3(val)       bfin_write16(CAN_MB13_DATA3,val)
+#define bfin_read_CAN_MB13_DATA2()           bfin_read16(CAN_MB13_DATA2)
+#define bfin_write_CAN_MB13_DATA2(val)       bfin_write16(CAN_MB13_DATA2,val)
+#define bfin_read_CAN_MB13_DATA1()           bfin_read16(CAN_MB13_DATA1)
+#define bfin_write_CAN_MB13_DATA1(val)       bfin_write16(CAN_MB13_DATA1,val)
+#define bfin_read_CAN_MB13_DATA0()           bfin_read16(CAN_MB13_DATA0)
+#define bfin_write_CAN_MB13_DATA0(val)       bfin_write16(CAN_MB13_DATA0,val)
+
+#define bfin_read_CAN_MB14_ID1()             bfin_read16(CAN_MB14_ID1)
+#define bfin_write_CAN_MB14_ID1(val)         bfin_write16(CAN_MB14_ID1,val)
+#define bfin_read_CAN_MB14_ID0()             bfin_read16(CAN_MB14_ID0)
+#define bfin_write_CAN_MB14_ID0(val)         bfin_write16(CAN_MB14_ID0,val)
+#define bfin_read_CAN_MB14_TIMESTAMP()       bfin_read16(CAN_MB14_TIMESTAMP)
+#define bfin_write_CAN_MB14_TIMESTAMP(val)   bfin_write16(CAN_MB14_TIMESTAMP,val)
+#define bfin_read_CAN_MB14_LENGTH()          bfin_read16(CAN_MB14_LENGTH)
+#define bfin_write_CAN_MB14_LENGTH(val)      bfin_write16(CAN_MB14_LENGTH,val)
+#define bfin_read_CAN_MB14_DATA3()           bfin_read16(CAN_MB14_DATA3)
+#define bfin_write_CAN_MB14_DATA3(val)       bfin_write16(CAN_MB14_DATA3,val)
+#define bfin_read_CAN_MB14_DATA2()           bfin_read16(CAN_MB14_DATA2)
+#define bfin_write_CAN_MB14_DATA2(val)       bfin_write16(CAN_MB14_DATA2,val)
+#define bfin_read_CAN_MB14_DATA1()           bfin_read16(CAN_MB14_DATA1)
+#define bfin_write_CAN_MB14_DATA1(val)       bfin_write16(CAN_MB14_DATA1,val)
+#define bfin_read_CAN_MB14_DATA0()           bfin_read16(CAN_MB14_DATA0)
+#define bfin_write_CAN_MB14_DATA0(val)       bfin_write16(CAN_MB14_DATA0,val)
+
+#define bfin_read_CAN_MB15_ID1()             bfin_read16(CAN_MB15_ID1)
+#define bfin_write_CAN_MB15_ID1(val)         bfin_write16(CAN_MB15_ID1,val)
+#define bfin_read_CAN_MB15_ID0()             bfin_read16(CAN_MB15_ID0)
+#define bfin_write_CAN_MB15_ID0(val)         bfin_write16(CAN_MB15_ID0,val)
+#define bfin_read_CAN_MB15_TIMESTAMP()       bfin_read16(CAN_MB15_TIMESTAMP)
+#define bfin_write_CAN_MB15_TIMESTAMP(val)   bfin_write16(CAN_MB15_TIMESTAMP,val)
+#define bfin_read_CAN_MB15_LENGTH()          bfin_read16(CAN_MB15_LENGTH)
+#define bfin_write_CAN_MB15_LENGTH(val)      bfin_write16(CAN_MB15_LENGTH,val)
+#define bfin_read_CAN_MB15_DATA3()           bfin_read16(CAN_MB15_DATA3)
+#define bfin_write_CAN_MB15_DATA3(val)       bfin_write16(CAN_MB15_DATA3,val)
+#define bfin_read_CAN_MB15_DATA2()           bfin_read16(CAN_MB15_DATA2)
+#define bfin_write_CAN_MB15_DATA2(val)       bfin_write16(CAN_MB15_DATA2,val)
+#define bfin_read_CAN_MB15_DATA1()           bfin_read16(CAN_MB15_DATA1)
+#define bfin_write_CAN_MB15_DATA1(val)       bfin_write16(CAN_MB15_DATA1,val)
+#define bfin_read_CAN_MB15_DATA0()           bfin_read16(CAN_MB15_DATA0)
+#define bfin_write_CAN_MB15_DATA0(val)       bfin_write16(CAN_MB15_DATA0,val)
+
+#define bfin_read_CAN_MB16_ID1()             bfin_read16(CAN_MB16_ID1)
+#define bfin_write_CAN_MB16_ID1(val)         bfin_write16(CAN_MB16_ID1,val)
+#define bfin_read_CAN_MB16_ID0()             bfin_read16(CAN_MB16_ID0)
+#define bfin_write_CAN_MB16_ID0(val)         bfin_write16(CAN_MB16_ID0,val)
+#define bfin_read_CAN_MB16_TIMESTAMP()       bfin_read16(CAN_MB16_TIMESTAMP)
+#define bfin_write_CAN_MB16_TIMESTAMP(val)   bfin_write16(CAN_MB16_TIMESTAMP,val)
+#define bfin_read_CAN_MB16_LENGTH()          bfin_read16(CAN_MB16_LENGTH)
+#define bfin_write_CAN_MB16_LENGTH(val)      bfin_write16(CAN_MB16_LENGTH,val)
+#define bfin_read_CAN_MB16_DATA3()           bfin_read16(CAN_MB16_DATA3)
+#define bfin_write_CAN_MB16_DATA3(val)       bfin_write16(CAN_MB16_DATA3,val)
+#define bfin_read_CAN_MB16_DATA2()           bfin_read16(CAN_MB16_DATA2)
+#define bfin_write_CAN_MB16_DATA2(val)       bfin_write16(CAN_MB16_DATA2,val)
+#define bfin_read_CAN_MB16_DATA1()           bfin_read16(CAN_MB16_DATA1)
+#define bfin_write_CAN_MB16_DATA1(val)       bfin_write16(CAN_MB16_DATA1,val)
+#define bfin_read_CAN_MB16_DATA0()           bfin_read16(CAN_MB16_DATA0)
+#define bfin_write_CAN_MB16_DATA0(val)       bfin_write16(CAN_MB16_DATA0,val)
+
+#define bfin_read_CAN_MB17_ID1()             bfin_read16(CAN_MB17_ID1)
+#define bfin_write_CAN_MB17_ID1(val)         bfin_write16(CAN_MB17_ID1,val)
+#define bfin_read_CAN_MB17_ID0()             bfin_read16(CAN_MB17_ID0)
+#define bfin_write_CAN_MB17_ID0(val)         bfin_write16(CAN_MB17_ID0,val)
+#define bfin_read_CAN_MB17_TIMESTAMP()       bfin_read16(CAN_MB17_TIMESTAMP)
+#define bfin_write_CAN_MB17_TIMESTAMP(val)   bfin_write16(CAN_MB17_TIMESTAMP,val)
+#define bfin_read_CAN_MB17_LENGTH()          bfin_read16(CAN_MB17_LENGTH)
+#define bfin_write_CAN_MB17_LENGTH(val)      bfin_write16(CAN_MB17_LENGTH,val)
+#define bfin_read_CAN_MB17_DATA3()           bfin_read16(CAN_MB17_DATA3)
+#define bfin_write_CAN_MB17_DATA3(val)       bfin_write16(CAN_MB17_DATA3,val)
+#define bfin_read_CAN_MB17_DATA2()           bfin_read16(CAN_MB17_DATA2)
+#define bfin_write_CAN_MB17_DATA2(val)       bfin_write16(CAN_MB17_DATA2,val)
+#define bfin_read_CAN_MB17_DATA1()           bfin_read16(CAN_MB17_DATA1)
+#define bfin_write_CAN_MB17_DATA1(val)       bfin_write16(CAN_MB17_DATA1,val)
+#define bfin_read_CAN_MB17_DATA0()           bfin_read16(CAN_MB17_DATA0)
+#define bfin_write_CAN_MB17_DATA0(val)       bfin_write16(CAN_MB17_DATA0,val)
+
+#define bfin_read_CAN_MB18_ID1()             bfin_read16(CAN_MB18_ID1)
+#define bfin_write_CAN_MB18_ID1(val)         bfin_write16(CAN_MB18_ID1,val)
+#define bfin_read_CAN_MB18_ID0()             bfin_read16(CAN_MB18_ID0)
+#define bfin_write_CAN_MB18_ID0(val)         bfin_write16(CAN_MB18_ID0,val)
+#define bfin_read_CAN_MB18_TIMESTAMP()       bfin_read16(CAN_MB18_TIMESTAMP)
+#define bfin_write_CAN_MB18_TIMESTAMP(val)   bfin_write16(CAN_MB18_TIMESTAMP,val)
+#define bfin_read_CAN_MB18_LENGTH()          bfin_read16(CAN_MB18_LENGTH)
+#define bfin_write_CAN_MB18_LENGTH(val)      bfin_write16(CAN_MB18_LENGTH,val)
+#define bfin_read_CAN_MB18_DATA3()           bfin_read16(CAN_MB18_DATA3)
+#define bfin_write_CAN_MB18_DATA3(val)       bfin_write16(CAN_MB18_DATA3,val)
+#define bfin_read_CAN_MB18_DATA2()           bfin_read16(CAN_MB18_DATA2)
+#define bfin_write_CAN_MB18_DATA2(val)       bfin_write16(CAN_MB18_DATA2,val)
+#define bfin_read_CAN_MB18_DATA1()           bfin_read16(CAN_MB18_DATA1)
+#define bfin_write_CAN_MB18_DATA1(val)       bfin_write16(CAN_MB18_DATA1,val)
+#define bfin_read_CAN_MB18_DATA0()           bfin_read16(CAN_MB18_DATA0)
+#define bfin_write_CAN_MB18_DATA0(val)       bfin_write16(CAN_MB18_DATA0,val)
+
+#define bfin_read_CAN_MB19_ID1()             bfin_read16(CAN_MB19_ID1)
+#define bfin_write_CAN_MB19_ID1(val)         bfin_write16(CAN_MB19_ID1,val)
+#define bfin_read_CAN_MB19_ID0()             bfin_read16(CAN_MB19_ID0)
+#define bfin_write_CAN_MB19_ID0(val)         bfin_write16(CAN_MB19_ID0,val)
+#define bfin_read_CAN_MB19_TIMESTAMP()       bfin_read16(CAN_MB19_TIMESTAMP)
+#define bfin_write_CAN_MB19_TIMESTAMP(val)   bfin_write16(CAN_MB19_TIMESTAMP,val)
+#define bfin_read_CAN_MB19_LENGTH()          bfin_read16(CAN_MB19_LENGTH)
+#define bfin_write_CAN_MB19_LENGTH(val)      bfin_write16(CAN_MB19_LENGTH,val)
+#define bfin_read_CAN_MB19_DATA3()           bfin_read16(CAN_MB19_DATA3)
+#define bfin_write_CAN_MB19_DATA3(val)       bfin_write16(CAN_MB19_DATA3,val)
+#define bfin_read_CAN_MB19_DATA2()           bfin_read16(CAN_MB19_DATA2)
+#define bfin_write_CAN_MB19_DATA2(val)       bfin_write16(CAN_MB19_DATA2,val)
+#define bfin_read_CAN_MB19_DATA1()           bfin_read16(CAN_MB19_DATA1)
+#define bfin_write_CAN_MB19_DATA1(val)       bfin_write16(CAN_MB19_DATA1,val)
+#define bfin_read_CAN_MB19_DATA0()           bfin_read16(CAN_MB19_DATA0)
+#define bfin_write_CAN_MB19_DATA0(val)       bfin_write16(CAN_MB19_DATA0,val)
+
+#define bfin_read_CAN_MB20_ID1()             bfin_read16(CAN_MB20_ID1)
+#define bfin_write_CAN_MB20_ID1(val)         bfin_write16(CAN_MB20_ID1,val)
+#define bfin_read_CAN_MB20_ID0()             bfin_read16(CAN_MB20_ID0)
+#define bfin_write_CAN_MB20_ID0(val)         bfin_write16(CAN_MB20_ID0,val)
+#define bfin_read_CAN_MB20_TIMESTAMP()       bfin_read16(CAN_MB20_TIMESTAMP)
+#define bfin_write_CAN_MB20_TIMESTAMP(val)   bfin_write16(CAN_MB20_TIMESTAMP,val)
+#define bfin_read_CAN_MB20_LENGTH()          bfin_read16(CAN_MB20_LENGTH)
+#define bfin_write_CAN_MB20_LENGTH(val)      bfin_write16(CAN_MB20_LENGTH,val)
+#define bfin_read_CAN_MB20_DATA3()           bfin_read16(CAN_MB20_DATA3)
+#define bfin_write_CAN_MB20_DATA3(val)       bfin_write16(CAN_MB20_DATA3,val)
+#define bfin_read_CAN_MB20_DATA2()           bfin_read16(CAN_MB20_DATA2)
+#define bfin_write_CAN_MB20_DATA2(val)       bfin_write16(CAN_MB20_DATA2,val)
+#define bfin_read_CAN_MB20_DATA1()           bfin_read16(CAN_MB20_DATA1)
+#define bfin_write_CAN_MB20_DATA1(val)       bfin_write16(CAN_MB20_DATA1,val)
+#define bfin_read_CAN_MB20_DATA0()           bfin_read16(CAN_MB20_DATA0)
+#define bfin_write_CAN_MB20_DATA0(val)       bfin_write16(CAN_MB20_DATA0,val)
+
+#define bfin_read_CAN_MB21_ID1()             bfin_read16(CAN_MB21_ID1)
+#define bfin_write_CAN_MB21_ID1(val)         bfin_write16(CAN_MB21_ID1,val)
+#define bfin_read_CAN_MB21_ID0()             bfin_read16(CAN_MB21_ID0)
+#define bfin_write_CAN_MB21_ID0(val)         bfin_write16(CAN_MB21_ID0,val)
+#define bfin_read_CAN_MB21_TIMESTAMP()       bfin_read16(CAN_MB21_TIMESTAMP)
+#define bfin_write_CAN_MB21_TIMESTAMP(val)   bfin_write16(CAN_MB21_TIMESTAMP,val)
+#define bfin_read_CAN_MB21_LENGTH()          bfin_read16(CAN_MB21_LENGTH)
+#define bfin_write_CAN_MB21_LENGTH(val)      bfin_write16(CAN_MB21_LENGTH,val)
+#define bfin_read_CAN_MB21_DATA3()           bfin_read16(CAN_MB21_DATA3)
+#define bfin_write_CAN_MB21_DATA3(val)       bfin_write16(CAN_MB21_DATA3,val)
+#define bfin_read_CAN_MB21_DATA2()           bfin_read16(CAN_MB21_DATA2)
+#define bfin_write_CAN_MB21_DATA2(val)       bfin_write16(CAN_MB21_DATA2,val)
+#define bfin_read_CAN_MB21_DATA1()           bfin_read16(CAN_MB21_DATA1)
+#define bfin_write_CAN_MB21_DATA1(val)       bfin_write16(CAN_MB21_DATA1,val)
+#define bfin_read_CAN_MB21_DATA0()           bfin_read16(CAN_MB21_DATA0)
+#define bfin_write_CAN_MB21_DATA0(val)       bfin_write16(CAN_MB21_DATA0,val)
+
+#define bfin_read_CAN_MB22_ID1()             bfin_read16(CAN_MB22_ID1)
+#define bfin_write_CAN_MB22_ID1(val)         bfin_write16(CAN_MB22_ID1,val)
+#define bfin_read_CAN_MB22_ID0()             bfin_read16(CAN_MB22_ID0)
+#define bfin_write_CAN_MB22_ID0(val)         bfin_write16(CAN_MB22_ID0,val)
+#define bfin_read_CAN_MB22_TIMESTAMP()       bfin_read16(CAN_MB22_TIMESTAMP)
+#define bfin_write_CAN_MB22_TIMESTAMP(val)   bfin_write16(CAN_MB22_TIMESTAMP,val)
+#define bfin_read_CAN_MB22_LENGTH()          bfin_read16(CAN_MB22_LENGTH)
+#define bfin_write_CAN_MB22_LENGTH(val)      bfin_write16(CAN_MB22_LENGTH,val)
+#define bfin_read_CAN_MB22_DATA3()           bfin_read16(CAN_MB22_DATA3)
+#define bfin_write_CAN_MB22_DATA3(val)       bfin_write16(CAN_MB22_DATA3,val)
+#define bfin_read_CAN_MB22_DATA2()           bfin_read16(CAN_MB22_DATA2)
+#define bfin_write_CAN_MB22_DATA2(val)       bfin_write16(CAN_MB22_DATA2,val)
+#define bfin_read_CAN_MB22_DATA1()           bfin_read16(CAN_MB22_DATA1)
+#define bfin_write_CAN_MB22_DATA1(val)       bfin_write16(CAN_MB22_DATA1,val)
+#define bfin_read_CAN_MB22_DATA0()           bfin_read16(CAN_MB22_DATA0)
+#define bfin_write_CAN_MB22_DATA0(val)       bfin_write16(CAN_MB22_DATA0,val)
+
+#define bfin_read_CAN_MB23_ID1()             bfin_read16(CAN_MB23_ID1)
+#define bfin_write_CAN_MB23_ID1(val)         bfin_write16(CAN_MB23_ID1,val)
+#define bfin_read_CAN_MB23_ID0()             bfin_read16(CAN_MB23_ID0)
+#define bfin_write_CAN_MB23_ID0(val)         bfin_write16(CAN_MB23_ID0,val)
+#define bfin_read_CAN_MB23_TIMESTAMP()       bfin_read16(CAN_MB23_TIMESTAMP)
+#define bfin_write_CAN_MB23_TIMESTAMP(val)   bfin_write16(CAN_MB23_TIMESTAMP,val)
+#define bfin_read_CAN_MB23_LENGTH()          bfin_read16(CAN_MB23_LENGTH)
+#define bfin_write_CAN_MB23_LENGTH(val)      bfin_write16(CAN_MB23_LENGTH,val)
+#define bfin_read_CAN_MB23_DATA3()           bfin_read16(CAN_MB23_DATA3)
+#define bfin_write_CAN_MB23_DATA3(val)       bfin_write16(CAN_MB23_DATA3,val)
+#define bfin_read_CAN_MB23_DATA2()           bfin_read16(CAN_MB23_DATA2)
+#define bfin_write_CAN_MB23_DATA2(val)       bfin_write16(CAN_MB23_DATA2,val)
+#define bfin_read_CAN_MB23_DATA1()           bfin_read16(CAN_MB23_DATA1)
+#define bfin_write_CAN_MB23_DATA1(val)       bfin_write16(CAN_MB23_DATA1,val)
+#define bfin_read_CAN_MB23_DATA0()           bfin_read16(CAN_MB23_DATA0)
+#define bfin_write_CAN_MB23_DATA0(val)       bfin_write16(CAN_MB23_DATA0,val)
+
+#define bfin_read_CAN_MB24_ID1()             bfin_read16(CAN_MB24_ID1)
+#define bfin_write_CAN_MB24_ID1(val)         bfin_write16(CAN_MB24_ID1,val)
+#define bfin_read_CAN_MB24_ID0()             bfin_read16(CAN_MB24_ID0)
+#define bfin_write_CAN_MB24_ID0(val)         bfin_write16(CAN_MB24_ID0,val)
+#define bfin_read_CAN_MB24_TIMESTAMP()       bfin_read16(CAN_MB24_TIMESTAMP)
+#define bfin_write_CAN_MB24_TIMESTAMP(val)   bfin_write16(CAN_MB24_TIMESTAMP,val)
+#define bfin_read_CAN_MB24_LENGTH()          bfin_read16(CAN_MB24_LENGTH)
+#define bfin_write_CAN_MB24_LENGTH(val)      bfin_write16(CAN_MB24_LENGTH,val)
+#define bfin_read_CAN_MB24_DATA3()           bfin_read16(CAN_MB24_DATA3)
+#define bfin_write_CAN_MB24_DATA3(val)       bfin_write16(CAN_MB24_DATA3,val)
+#define bfin_read_CAN_MB24_DATA2()           bfin_read16(CAN_MB24_DATA2)
+#define bfin_write_CAN_MB24_DATA2(val)       bfin_write16(CAN_MB24_DATA2,val)
+#define bfin_read_CAN_MB24_DATA1()           bfin_read16(CAN_MB24_DATA1)
+#define bfin_write_CAN_MB24_DATA1(val)       bfin_write16(CAN_MB24_DATA1,val)
+#define bfin_read_CAN_MB24_DATA0()           bfin_read16(CAN_MB24_DATA0)
+#define bfin_write_CAN_MB24_DATA0(val)       bfin_write16(CAN_MB24_DATA0,val)
+
+#define bfin_read_CAN_MB25_ID1()             bfin_read16(CAN_MB25_ID1)
+#define bfin_write_CAN_MB25_ID1(val)         bfin_write16(CAN_MB25_ID1,val)
+#define bfin_read_CAN_MB25_ID0()             bfin_read16(CAN_MB25_ID0)
+#define bfin_write_CAN_MB25_ID0(val)         bfin_write16(CAN_MB25_ID0,val)
+#define bfin_read_CAN_MB25_TIMESTAMP()       bfin_read16(CAN_MB25_TIMESTAMP)
+#define bfin_write_CAN_MB25_TIMESTAMP(val)   bfin_write16(CAN_MB25_TIMESTAMP,val)
+#define bfin_read_CAN_MB25_LENGTH()          bfin_read16(CAN_MB25_LENGTH)
+#define bfin_write_CAN_MB25_LENGTH(val)      bfin_write16(CAN_MB25_LENGTH,val)
+#define bfin_read_CAN_MB25_DATA3()           bfin_read16(CAN_MB25_DATA3)
+#define bfin_write_CAN_MB25_DATA3(val)       bfin_write16(CAN_MB25_DATA3,val)
+#define bfin_read_CAN_MB25_DATA2()           bfin_read16(CAN_MB25_DATA2)
+#define bfin_write_CAN_MB25_DATA2(val)       bfin_write16(CAN_MB25_DATA2,val)
+#define bfin_read_CAN_MB25_DATA1()           bfin_read16(CAN_MB25_DATA1)
+#define bfin_write_CAN_MB25_DATA1(val)       bfin_write16(CAN_MB25_DATA1,val)
+#define bfin_read_CAN_MB25_DATA0()           bfin_read16(CAN_MB25_DATA0)
+#define bfin_write_CAN_MB25_DATA0(val)       bfin_write16(CAN_MB25_DATA0,val)
+
+#define bfin_read_CAN_MB26_ID1()             bfin_read16(CAN_MB26_ID1)
+#define bfin_write_CAN_MB26_ID1(val)         bfin_write16(CAN_MB26_ID1,val)
+#define bfin_read_CAN_MB26_ID0()             bfin_read16(CAN_MB26_ID0)
+#define bfin_write_CAN_MB26_ID0(val)         bfin_write16(CAN_MB26_ID0,val)
+#define bfin_read_CAN_MB26_TIMESTAMP()       bfin_read16(CAN_MB26_TIMESTAMP)
+#define bfin_write_CAN_MB26_TIMESTAMP(val)   bfin_write16(CAN_MB26_TIMESTAMP,val)
+#define bfin_read_CAN_MB26_LENGTH()          bfin_read16(CAN_MB26_LENGTH)
+#define bfin_write_CAN_MB26_LENGTH(val)      bfin_write16(CAN_MB26_LENGTH,val)
+#define bfin_read_CAN_MB26_DATA3()           bfin_read16(CAN_MB26_DATA3)
+#define bfin_write_CAN_MB26_DATA3(val)       bfin_write16(CAN_MB26_DATA3,val)
+#define bfin_read_CAN_MB26_DATA2()           bfin_read16(CAN_MB26_DATA2)
+#define bfin_write_CAN_MB26_DATA2(val)       bfin_write16(CAN_MB26_DATA2,val)
+#define bfin_read_CAN_MB26_DATA1()           bfin_read16(CAN_MB26_DATA1)
+#define bfin_write_CAN_MB26_DATA1(val)       bfin_write16(CAN_MB26_DATA1,val)
+#define bfin_read_CAN_MB26_DATA0()           bfin_read16(CAN_MB26_DATA0)
+#define bfin_write_CAN_MB26_DATA0(val)       bfin_write16(CAN_MB26_DATA0,val)
+
+#define bfin_read_CAN_MB27_ID1()             bfin_read16(CAN_MB27_ID1)
+#define bfin_write_CAN_MB27_ID1(val)         bfin_write16(CAN_MB27_ID1,val)
+#define bfin_read_CAN_MB27_ID0()             bfin_read16(CAN_MB27_ID0)
+#define bfin_write_CAN_MB27_ID0(val)         bfin_write16(CAN_MB27_ID0,val)
+#define bfin_read_CAN_MB27_TIMESTAMP()       bfin_read16(CAN_MB27_TIMESTAMP)
+#define bfin_write_CAN_MB27_TIMESTAMP(val)   bfin_write16(CAN_MB27_TIMESTAMP,val)
+#define bfin_read_CAN_MB27_LENGTH()          bfin_read16(CAN_MB27_LENGTH)
+#define bfin_write_CAN_MB27_LENGTH(val)      bfin_write16(CAN_MB27_LENGTH,val)
+#define bfin_read_CAN_MB27_DATA3()           bfin_read16(CAN_MB27_DATA3)
+#define bfin_write_CAN_MB27_DATA3(val)       bfin_write16(CAN_MB27_DATA3,val)
+#define bfin_read_CAN_MB27_DATA2()           bfin_read16(CAN_MB27_DATA2)
+#define bfin_write_CAN_MB27_DATA2(val)       bfin_write16(CAN_MB27_DATA2,val)
+#define bfin_read_CAN_MB27_DATA1()           bfin_read16(CAN_MB27_DATA1)
+#define bfin_write_CAN_MB27_DATA1(val)       bfin_write16(CAN_MB27_DATA1,val)
+#define bfin_read_CAN_MB27_DATA0()           bfin_read16(CAN_MB27_DATA0)
+#define bfin_write_CAN_MB27_DATA0(val)       bfin_write16(CAN_MB27_DATA0,val)
+
+#define bfin_read_CAN_MB28_ID1()             bfin_read16(CAN_MB28_ID1)
+#define bfin_write_CAN_MB28_ID1(val)         bfin_write16(CAN_MB28_ID1,val)
+#define bfin_read_CAN_MB28_ID0()             bfin_read16(CAN_MB28_ID0)
+#define bfin_write_CAN_MB28_ID0(val)         bfin_write16(CAN_MB28_ID0,val)
+#define bfin_read_CAN_MB28_TIMESTAMP()       bfin_read16(CAN_MB28_TIMESTAMP)
+#define bfin_write_CAN_MB28_TIMESTAMP(val)   bfin_write16(CAN_MB28_TIMESTAMP,val)
+#define bfin_read_CAN_MB28_LENGTH()          bfin_read16(CAN_MB28_LENGTH)
+#define bfin_write_CAN_MB28_LENGTH(val)      bfin_write16(CAN_MB28_LENGTH,val)
+#define bfin_read_CAN_MB28_DATA3()           bfin_read16(CAN_MB28_DATA3)
+#define bfin_write_CAN_MB28_DATA3(val)       bfin_write16(CAN_MB28_DATA3,val)
+#define bfin_read_CAN_MB28_DATA2()           bfin_read16(CAN_MB28_DATA2)
+#define bfin_write_CAN_MB28_DATA2(val)       bfin_write16(CAN_MB28_DATA2,val)
+#define bfin_read_CAN_MB28_DATA1()           bfin_read16(CAN_MB28_DATA1)
+#define bfin_write_CAN_MB28_DATA1(val)       bfin_write16(CAN_MB28_DATA1,val)
+#define bfin_read_CAN_MB28_DATA0()           bfin_read16(CAN_MB28_DATA0)
+#define bfin_write_CAN_MB28_DATA0(val)       bfin_write16(CAN_MB28_DATA0,val)
+
+#define bfin_read_CAN_MB29_ID1()             bfin_read16(CAN_MB29_ID1)
+#define bfin_write_CAN_MB29_ID1(val)         bfin_write16(CAN_MB29_ID1,val)
+#define bfin_read_CAN_MB29_ID0()             bfin_read16(CAN_MB29_ID0)
+#define bfin_write_CAN_MB29_ID0(val)         bfin_write16(CAN_MB29_ID0,val)
+#define bfin_read_CAN_MB29_TIMESTAMP()       bfin_read16(CAN_MB29_TIMESTAMP)
+#define bfin_write_CAN_MB29_TIMESTAMP(val)   bfin_write16(CAN_MB29_TIMESTAMP,val)
+#define bfin_read_CAN_MB29_LENGTH()          bfin_read16(CAN_MB29_LENGTH)
+#define bfin_write_CAN_MB29_LENGTH(val)      bfin_write16(CAN_MB29_LENGTH,val)
+#define bfin_read_CAN_MB29_DATA3()           bfin_read16(CAN_MB29_DATA3)
+#define bfin_write_CAN_MB29_DATA3(val)       bfin_write16(CAN_MB29_DATA3,val)
+#define bfin_read_CAN_MB29_DATA2()           bfin_read16(CAN_MB29_DATA2)
+#define bfin_write_CAN_MB29_DATA2(val)       bfin_write16(CAN_MB29_DATA2,val)
+#define bfin_read_CAN_MB29_DATA1()           bfin_read16(CAN_MB29_DATA1)
+#define bfin_write_CAN_MB29_DATA1(val)       bfin_write16(CAN_MB29_DATA1,val)
+#define bfin_read_CAN_MB29_DATA0()           bfin_read16(CAN_MB29_DATA0)
+#define bfin_write_CAN_MB29_DATA0(val)       bfin_write16(CAN_MB29_DATA0,val)
+
+#define bfin_read_CAN_MB30_ID1()             bfin_read16(CAN_MB30_ID1)
+#define bfin_write_CAN_MB30_ID1(val)         bfin_write16(CAN_MB30_ID1,val)
+#define bfin_read_CAN_MB30_ID0()             bfin_read16(CAN_MB30_ID0)
+#define bfin_write_CAN_MB30_ID0(val)         bfin_write16(CAN_MB30_ID0,val)
+#define bfin_read_CAN_MB30_TIMESTAMP()       bfin_read16(CAN_MB30_TIMESTAMP)
+#define bfin_write_CAN_MB30_TIMESTAMP(val)   bfin_write16(CAN_MB30_TIMESTAMP,val)
+#define bfin_read_CAN_MB30_LENGTH()          bfin_read16(CAN_MB30_LENGTH)
+#define bfin_write_CAN_MB30_LENGTH(val)      bfin_write16(CAN_MB30_LENGTH,val)
+#define bfin_read_CAN_MB30_DATA3()           bfin_read16(CAN_MB30_DATA3)
+#define bfin_write_CAN_MB30_DATA3(val)       bfin_write16(CAN_MB30_DATA3,val)
+#define bfin_read_CAN_MB30_DATA2()           bfin_read16(CAN_MB30_DATA2)
+#define bfin_write_CAN_MB30_DATA2(val)       bfin_write16(CAN_MB30_DATA2,val)
+#define bfin_read_CAN_MB30_DATA1()           bfin_read16(CAN_MB30_DATA1)
+#define bfin_write_CAN_MB30_DATA1(val)       bfin_write16(CAN_MB30_DATA1,val)
+#define bfin_read_CAN_MB30_DATA0()           bfin_read16(CAN_MB30_DATA0)
+#define bfin_write_CAN_MB30_DATA0(val)       bfin_write16(CAN_MB30_DATA0,val)
+
+#define bfin_read_CAN_MB31_ID1()             bfin_read16(CAN_MB31_ID1)
+#define bfin_write_CAN_MB31_ID1(val)         bfin_write16(CAN_MB31_ID1,val)
+#define bfin_read_CAN_MB31_ID0()             bfin_read16(CAN_MB31_ID0)
+#define bfin_write_CAN_MB31_ID0(val)         bfin_write16(CAN_MB31_ID0,val)
+#define bfin_read_CAN_MB31_TIMESTAMP()       bfin_read16(CAN_MB31_TIMESTAMP)
+#define bfin_write_CAN_MB31_TIMESTAMP(val)   bfin_write16(CAN_MB31_TIMESTAMP,val)
+#define bfin_read_CAN_MB31_LENGTH()          bfin_read16(CAN_MB31_LENGTH)
+#define bfin_write_CAN_MB31_LENGTH(val)      bfin_write16(CAN_MB31_LENGTH,val)
+#define bfin_read_CAN_MB31_DATA3()           bfin_read16(CAN_MB31_DATA3)
+#define bfin_write_CAN_MB31_DATA3(val)       bfin_write16(CAN_MB31_DATA3,val)
+#define bfin_read_CAN_MB31_DATA2()           bfin_read16(CAN_MB31_DATA2)
+#define bfin_write_CAN_MB31_DATA2(val)       bfin_write16(CAN_MB31_DATA2,val)
+#define bfin_read_CAN_MB31_DATA1()           bfin_read16(CAN_MB31_DATA1)
+#define bfin_write_CAN_MB31_DATA1(val)       bfin_write16(CAN_MB31_DATA1,val)
+#define bfin_read_CAN_MB31_DATA0()           bfin_read16(CAN_MB31_DATA0)
+#define bfin_write_CAN_MB31_DATA0(val)       bfin_write16(CAN_MB31_DATA0,val)
+
+/* CAN Mailbox Area Macros		*/
+#define bfin_read_CAN_MB_ID1(x)()            bfin_read16(CAN_MB_ID1(x))
+#define bfin_write_CAN_MB_ID1(x)(val)        bfin_write16(CAN_MB_ID1(x),val)
+#define bfin_read_CAN_MB_ID0(x)()            bfin_read16(CAN_MB_ID0(x))
+#define bfin_write_CAN_MB_ID0(x)(val)        bfin_write16(CAN_MB_ID0(x),val)
+#define bfin_read_CAN_MB_TIMESTAMP(x)()      bfin_read16(CAN_MB_TIMESTAMP(x))
+#define bfin_write_CAN_MB_TIMESTAMP(x)(val)  bfin_write16(CAN_MB_TIMESTAMP(x),val)
+#define bfin_read_CAN_MB_LENGTH(x)()         bfin_read16(CAN_MB_LENGTH(x))
+#define bfin_write_CAN_MB_LENGTH(x)(val)     bfin_write16(CAN_MB_LENGTH(x),val)
+#define bfin_read_CAN_MB_DATA3(x)()          bfin_read16(CAN_MB_DATA3(x))
+#define bfin_write_CAN_MB_DATA3(x)(val)      bfin_write16(CAN_MB_DATA3(x),val)
+#define bfin_read_CAN_MB_DATA2(x)()          bfin_read16(CAN_MB_DATA2(x))
+#define bfin_write_CAN_MB_DATA2(x)(val)      bfin_write16(CAN_MB_DATA2(x),val)
+#define bfin_read_CAN_MB_DATA1(x)()          bfin_read16(CAN_MB_DATA1(x))
+#define bfin_write_CAN_MB_DATA1(x)(val)      bfin_write16(CAN_MB_DATA1(x),val)
+#define bfin_read_CAN_MB_DATA0(x)()          bfin_read16(CAN_MB_DATA0(x))
+#define bfin_write_CAN_MB_DATA0(x)(val)      bfin_write16(CAN_MB_DATA0(x),val)
+
+/* Pin Control Registers	(0xFFC03200 - 0xFFC032FF)								*/
+#define bfin_read_PORTF_FER()                bfin_read16(PORTF_FER)
+#define bfin_write_PORTF_FER(val)            bfin_write16(PORTF_FER,val)
+#define bfin_read_PORTG_FER()                bfin_read16(PORTG_FER)
+#define bfin_write_PORTG_FER(val)            bfin_write16(PORTG_FER,val)
+#define bfin_read_PORTH_FER()                bfin_read16(PORTH_FER)
+#define bfin_write_PORTH_FER(val)            bfin_write16(PORTH_FER,val)
+#define bfin_read_PORT_MUX()                 bfin_read16(BFIN_PORT_MUX)
+#define bfin_write_PORT_MUX(val)             bfin_write16(BFIN_PORT_MUX,val)
+
+/* Handshake MDMA Registers	(0xFFC03300 - 0xFFC033FF)								*/
+#define bfin_read_HMDMA0_CONTROL()           bfin_read16(HMDMA0_CONTROL)
+#define bfin_write_HMDMA0_CONTROL(val)       bfin_write16(HMDMA0_CONTROL,val)
+#define bfin_read_HMDMA0_ECINIT()            bfin_read16(HMDMA0_ECINIT)
+#define bfin_write_HMDMA0_ECINIT(val)        bfin_write16(HMDMA0_ECINIT,val)
+#define bfin_read_HMDMA0_BCINIT()            bfin_read16(HMDMA0_BCINIT)
+#define bfin_write_HMDMA0_BCINIT(val)        bfin_write16(HMDMA0_BCINIT,val)
+#define bfin_read_HMDMA0_ECURGENT()          bfin_read16(HMDMA0_ECURGENT)
+#define bfin_write_HMDMA0_ECURGENT(val)      bfin_write16(HMDMA0_ECURGENT,val)
+#define bfin_read_HMDMA0_ECOVERFLOW()        bfin_read16(HMDMA0_ECOVERFLOW)
+#define bfin_write_HMDMA0_ECOVERFLOW(val)    bfin_write16(HMDMA0_ECOVERFLOW,val)
+#define bfin_read_HMDMA0_ECOUNT()            bfin_read16(HMDMA0_ECOUNT)
+#define bfin_write_HMDMA0_ECOUNT(val)        bfin_write16(HMDMA0_ECOUNT,val)
+#define bfin_read_HMDMA0_BCOUNT()            bfin_read16(HMDMA0_BCOUNT)
+#define bfin_write_HMDMA0_BCOUNT(val)        bfin_write16(HMDMA0_BCOUNT,val)
+
+#define bfin_read_HMDMA1_CONTROL()           bfin_read16(HMDMA1_CONTROL)
+#define bfin_write_HMDMA1_CONTROL(val)       bfin_write16(HMDMA1_CONTROL,val)
+#define bfin_read_HMDMA1_ECINIT()            bfin_read16(HMDMA1_ECINIT)
+#define bfin_write_HMDMA1_ECINIT(val)        bfin_write16(HMDMA1_ECINIT,val)
+#define bfin_read_HMDMA1_BCINIT()            bfin_read16(HMDMA1_BCINIT)
+#define bfin_write_HMDMA1_BCINIT(val)        bfin_write16(HMDMA1_BCINIT,val)
+#define bfin_read_HMDMA1_ECURGENT()          bfin_read16(HMDMA1_ECURGENT)
+#define bfin_write_HMDMA1_ECURGENT(val)      bfin_write16(HMDMA1_ECURGENT,val)
+#define bfin_read_HMDMA1_ECOVERFLOW()        bfin_read16(HMDMA1_ECOVERFLOW)
+#define bfin_write_HMDMA1_ECOVERFLOW(val)    bfin_write16(HMDMA1_ECOVERFLOW,val)
+#define bfin_read_HMDMA1_ECOUNT()            bfin_read16(HMDMA1_ECOUNT)
+#define bfin_write_HMDMA1_ECOUNT(val)        bfin_write16(HMDMA1_ECOUNT,val)
+#define bfin_read_HMDMA1_BCOUNT()            bfin_read16(HMDMA1_BCOUNT)
+#define bfin_write_HMDMA1_BCOUNT(val)        bfin_write16(HMDMA1_BCOUNT,val)
+
+#endif				/* _CDEF_BF534_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/cdefBF537.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/cdefBF537.h
new file mode 100644
index 0000000..19ec21e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/cdefBF537.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _CDEF_BF537_H
+#define _CDEF_BF537_H
+
+/* Include MMRs Common to BF534 								*/
+#include "cdefBF534.h"
+
+/* Include Macro "Defines" For EMAC (Unique to BF536/BF537		*/
+/* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF) 						*/
+#define bfin_read_EMAC_OPMODE()              bfin_read32(EMAC_OPMODE)
+#define bfin_write_EMAC_OPMODE(val)          bfin_write32(EMAC_OPMODE,val)
+#define bfin_read_EMAC_ADDRLO()              bfin_read32(EMAC_ADDRLO)
+#define bfin_write_EMAC_ADDRLO(val)          bfin_write32(EMAC_ADDRLO,val)
+#define bfin_read_EMAC_ADDRHI()              bfin_read32(EMAC_ADDRHI)
+#define bfin_write_EMAC_ADDRHI(val)          bfin_write32(EMAC_ADDRHI,val)
+#define bfin_read_EMAC_HASHLO()              bfin_read32(EMAC_HASHLO)
+#define bfin_write_EMAC_HASHLO(val)          bfin_write32(EMAC_HASHLO,val)
+#define bfin_read_EMAC_HASHHI()              bfin_read32(EMAC_HASHHI)
+#define bfin_write_EMAC_HASHHI(val)          bfin_write32(EMAC_HASHHI,val)
+#define bfin_read_EMAC_STAADD()              bfin_read32(EMAC_STAADD)
+#define bfin_write_EMAC_STAADD(val)          bfin_write32(EMAC_STAADD,val)
+#define bfin_read_EMAC_STADAT()              bfin_read32(EMAC_STADAT)
+#define bfin_write_EMAC_STADAT(val)          bfin_write32(EMAC_STADAT,val)
+#define bfin_read_EMAC_FLC()                 bfin_read32(EMAC_FLC)
+#define bfin_write_EMAC_FLC(val)             bfin_write32(EMAC_FLC,val)
+#define bfin_read_EMAC_VLAN1()               bfin_read32(EMAC_VLAN1)
+#define bfin_write_EMAC_VLAN1(val)           bfin_write32(EMAC_VLAN1,val)
+#define bfin_read_EMAC_VLAN2()               bfin_read32(EMAC_VLAN2)
+#define bfin_write_EMAC_VLAN2(val)           bfin_write32(EMAC_VLAN2,val)
+#define bfin_read_EMAC_WKUP_CTL()            bfin_read32(EMAC_WKUP_CTL)
+#define bfin_write_EMAC_WKUP_CTL(val)        bfin_write32(EMAC_WKUP_CTL,val)
+#define bfin_read_EMAC_WKUP_FFMSK0()         bfin_read32(EMAC_WKUP_FFMSK0)
+#define bfin_write_EMAC_WKUP_FFMSK0(val)     bfin_write32(EMAC_WKUP_FFMSK0,val)
+#define bfin_read_EMAC_WKUP_FFMSK1()         bfin_read32(EMAC_WKUP_FFMSK1)
+#define bfin_write_EMAC_WKUP_FFMSK1(val)     bfin_write32(EMAC_WKUP_FFMSK1,val)
+#define bfin_read_EMAC_WKUP_FFMSK2()         bfin_read32(EMAC_WKUP_FFMSK2)
+#define bfin_write_EMAC_WKUP_FFMSK2(val)     bfin_write32(EMAC_WKUP_FFMSK2,val)
+#define bfin_read_EMAC_WKUP_FFMSK3()         bfin_read32(EMAC_WKUP_FFMSK3)
+#define bfin_write_EMAC_WKUP_FFMSK3(val)     bfin_write32(EMAC_WKUP_FFMSK3,val)
+#define bfin_read_EMAC_WKUP_FFCMD()          bfin_read32(EMAC_WKUP_FFCMD)
+#define bfin_write_EMAC_WKUP_FFCMD(val)      bfin_write32(EMAC_WKUP_FFCMD,val)
+#define bfin_read_EMAC_WKUP_FFOFF()          bfin_read32(EMAC_WKUP_FFOFF)
+#define bfin_write_EMAC_WKUP_FFOFF(val)      bfin_write32(EMAC_WKUP_FFOFF,val)
+#define bfin_read_EMAC_WKUP_FFCRC0()         bfin_read32(EMAC_WKUP_FFCRC0)
+#define bfin_write_EMAC_WKUP_FFCRC0(val)     bfin_write32(EMAC_WKUP_FFCRC0,val)
+#define bfin_read_EMAC_WKUP_FFCRC1()         bfin_read32(EMAC_WKUP_FFCRC1)
+#define bfin_write_EMAC_WKUP_FFCRC1(val)     bfin_write32(EMAC_WKUP_FFCRC1,val)
+
+#define bfin_read_EMAC_SYSCTL()              bfin_read32(EMAC_SYSCTL)
+#define bfin_write_EMAC_SYSCTL(val)          bfin_write32(EMAC_SYSCTL,val)
+#define bfin_read_EMAC_SYSTAT()              bfin_read32(EMAC_SYSTAT)
+#define bfin_write_EMAC_SYSTAT(val)          bfin_write32(EMAC_SYSTAT,val)
+#define bfin_read_EMAC_RX_STAT()             bfin_read32(EMAC_RX_STAT)
+#define bfin_write_EMAC_RX_STAT(val)         bfin_write32(EMAC_RX_STAT,val)
+#define bfin_read_EMAC_RX_STKY()             bfin_read32(EMAC_RX_STKY)
+#define bfin_write_EMAC_RX_STKY(val)         bfin_write32(EMAC_RX_STKY,val)
+#define bfin_read_EMAC_RX_IRQE()             bfin_read32(EMAC_RX_IRQE)
+#define bfin_write_EMAC_RX_IRQE(val)         bfin_write32(EMAC_RX_IRQE,val)
+#define bfin_read_EMAC_TX_STAT()             bfin_read32(EMAC_TX_STAT)
+#define bfin_write_EMAC_TX_STAT(val)         bfin_write32(EMAC_TX_STAT,val)
+#define bfin_read_EMAC_TX_STKY()             bfin_read32(EMAC_TX_STKY)
+#define bfin_write_EMAC_TX_STKY(val)         bfin_write32(EMAC_TX_STKY,val)
+#define bfin_read_EMAC_TX_IRQE()             bfin_read32(EMAC_TX_IRQE)
+#define bfin_write_EMAC_TX_IRQE(val)         bfin_write32(EMAC_TX_IRQE,val)
+
+#define bfin_read_EMAC_MMC_CTL()             bfin_read32(EMAC_MMC_CTL)
+#define bfin_write_EMAC_MMC_CTL(val)         bfin_write32(EMAC_MMC_CTL,val)
+#define bfin_read_EMAC_MMC_RIRQS()           bfin_read32(EMAC_MMC_RIRQS)
+#define bfin_write_EMAC_MMC_RIRQS(val)       bfin_write32(EMAC_MMC_RIRQS,val)
+#define bfin_read_EMAC_MMC_RIRQE()           bfin_read32(EMAC_MMC_RIRQE)
+#define bfin_write_EMAC_MMC_RIRQE(val)       bfin_write32(EMAC_MMC_RIRQE,val)
+#define bfin_read_EMAC_MMC_TIRQS()           bfin_read32(EMAC_MMC_TIRQS)
+#define bfin_write_EMAC_MMC_TIRQS(val)       bfin_write32(EMAC_MMC_TIRQS,val)
+#define bfin_read_EMAC_MMC_TIRQE()           bfin_read32(EMAC_MMC_TIRQE)
+#define bfin_write_EMAC_MMC_TIRQE(val)       bfin_write32(EMAC_MMC_TIRQE,val)
+
+#define bfin_read_EMAC_RXC_OK()              bfin_read32(EMAC_RXC_OK)
+#define bfin_write_EMAC_RXC_OK(val)          bfin_write32(EMAC_RXC_OK,val)
+#define bfin_read_EMAC_RXC_FCS()             bfin_read32(EMAC_RXC_FCS)
+#define bfin_write_EMAC_RXC_FCS(val)         bfin_write32(EMAC_RXC_FCS,val)
+#define bfin_read_EMAC_RXC_ALIGN()           bfin_read32(EMAC_RXC_ALIGN)
+#define bfin_write_EMAC_RXC_ALIGN(val)       bfin_write32(EMAC_RXC_ALIGN,val)
+#define bfin_read_EMAC_RXC_OCTET()           bfin_read32(EMAC_RXC_OCTET)
+#define bfin_write_EMAC_RXC_OCTET(val)       bfin_write32(EMAC_RXC_OCTET,val)
+#define bfin_read_EMAC_RXC_DMAOVF()          bfin_read32(EMAC_RXC_DMAOVF)
+#define bfin_write_EMAC_RXC_DMAOVF(val)      bfin_write32(EMAC_RXC_DMAOVF,val)
+#define bfin_read_EMAC_RXC_UNICST()          bfin_read32(EMAC_RXC_UNICST)
+#define bfin_write_EMAC_RXC_UNICST(val)      bfin_write32(EMAC_RXC_UNICST,val)
+#define bfin_read_EMAC_RXC_MULTI()           bfin_read32(EMAC_RXC_MULTI)
+#define bfin_write_EMAC_RXC_MULTI(val)       bfin_write32(EMAC_RXC_MULTI,val)
+#define bfin_read_EMAC_RXC_BROAD()           bfin_read32(EMAC_RXC_BROAD)
+#define bfin_write_EMAC_RXC_BROAD(val)       bfin_write32(EMAC_RXC_BROAD,val)
+#define bfin_read_EMAC_RXC_LNERRI()          bfin_read32(EMAC_RXC_LNERRI)
+#define bfin_write_EMAC_RXC_LNERRI(val)      bfin_write32(EMAC_RXC_LNERRI,val)
+#define bfin_read_EMAC_RXC_LNERRO()          bfin_read32(EMAC_RXC_LNERRO)
+#define bfin_write_EMAC_RXC_LNERRO(val)      bfin_write32(EMAC_RXC_LNERRO,val)
+#define bfin_read_EMAC_RXC_LONG()            bfin_read32(EMAC_RXC_LONG)
+#define bfin_write_EMAC_RXC_LONG(val)        bfin_write32(EMAC_RXC_LONG,val)
+#define bfin_read_EMAC_RXC_MACCTL()          bfin_read32(EMAC_RXC_MACCTL)
+#define bfin_write_EMAC_RXC_MACCTL(val)      bfin_write32(EMAC_RXC_MACCTL,val)
+#define bfin_read_EMAC_RXC_OPCODE()          bfin_read32(EMAC_RXC_OPCODE)
+#define bfin_write_EMAC_RXC_OPCODE(val)      bfin_write32(EMAC_RXC_OPCODE,val)
+#define bfin_read_EMAC_RXC_PAUSE()           bfin_read32(EMAC_RXC_PAUSE)
+#define bfin_write_EMAC_RXC_PAUSE(val)       bfin_write32(EMAC_RXC_PAUSE,val)
+#define bfin_read_EMAC_RXC_ALLFRM()          bfin_read32(EMAC_RXC_ALLFRM)
+#define bfin_write_EMAC_RXC_ALLFRM(val)      bfin_write32(EMAC_RXC_ALLFRM,val)
+#define bfin_read_EMAC_RXC_ALLOCT()          bfin_read32(EMAC_RXC_ALLOCT)
+#define bfin_write_EMAC_RXC_ALLOCT(val)      bfin_write32(EMAC_RXC_ALLOCT,val)
+#define bfin_read_EMAC_RXC_TYPED()           bfin_read32(EMAC_RXC_TYPED)
+#define bfin_write_EMAC_RXC_TYPED(val)       bfin_write32(EMAC_RXC_TYPED,val)
+#define bfin_read_EMAC_RXC_SHORT()           bfin_read32(EMAC_RXC_SHORT)
+#define bfin_write_EMAC_RXC_SHORT(val)       bfin_write32(EMAC_RXC_SHORT,val)
+#define bfin_read_EMAC_RXC_EQ64()            bfin_read32(EMAC_RXC_EQ64)
+#define bfin_write_EMAC_RXC_EQ64(val)        bfin_write32(EMAC_RXC_EQ64,val)
+#define bfin_read_EMAC_RXC_LT128()           bfin_read32(EMAC_RXC_LT128)
+#define bfin_write_EMAC_RXC_LT128(val)       bfin_write32(EMAC_RXC_LT128,val)
+#define bfin_read_EMAC_RXC_LT256()           bfin_read32(EMAC_RXC_LT256)
+#define bfin_write_EMAC_RXC_LT256(val)       bfin_write32(EMAC_RXC_LT256,val)
+#define bfin_read_EMAC_RXC_LT512()           bfin_read32(EMAC_RXC_LT512)
+#define bfin_write_EMAC_RXC_LT512(val)       bfin_write32(EMAC_RXC_LT512,val)
+#define bfin_read_EMAC_RXC_LT1024()          bfin_read32(EMAC_RXC_LT1024)
+#define bfin_write_EMAC_RXC_LT1024(val)      bfin_write32(EMAC_RXC_LT1024,val)
+#define bfin_read_EMAC_RXC_GE1024()          bfin_read32(EMAC_RXC_GE1024)
+#define bfin_write_EMAC_RXC_GE1024(val)      bfin_write32(EMAC_RXC_GE1024,val)
+
+#define bfin_read_EMAC_TXC_OK()              bfin_read32(EMAC_TXC_OK)
+#define bfin_write_EMAC_TXC_OK(val)          bfin_write32(EMAC_TXC_OK,val)
+#define bfin_read_EMAC_TXC_1COL()            bfin_read32(EMAC_TXC_1COL)
+#define bfin_write_EMAC_TXC_1COL(val)        bfin_write32(EMAC_TXC_1COL,val)
+#define bfin_read_EMAC_TXC_GT1COL()          bfin_read32(EMAC_TXC_GT1COL)
+#define bfin_write_EMAC_TXC_GT1COL(val)      bfin_write32(EMAC_TXC_GT1COL,val)
+#define bfin_read_EMAC_TXC_OCTET()           bfin_read32(EMAC_TXC_OCTET)
+#define bfin_write_EMAC_TXC_OCTET(val)       bfin_write32(EMAC_TXC_OCTET,val)
+#define bfin_read_EMAC_TXC_DEFER()           bfin_read32(EMAC_TXC_DEFER)
+#define bfin_write_EMAC_TXC_DEFER(val)       bfin_write32(EMAC_TXC_DEFER,val)
+#define bfin_read_EMAC_TXC_LATECL()          bfin_read32(EMAC_TXC_LATECL)
+#define bfin_write_EMAC_TXC_LATECL(val)      bfin_write32(EMAC_TXC_LATECL,val)
+#define bfin_read_EMAC_TXC_XS_COL()          bfin_read32(EMAC_TXC_XS_COL)
+#define bfin_write_EMAC_TXC_XS_COL(val)      bfin_write32(EMAC_TXC_XS_COL,val)
+#define bfin_read_EMAC_TXC_DMAUND()          bfin_read32(EMAC_TXC_DMAUND)
+#define bfin_write_EMAC_TXC_DMAUND(val)      bfin_write32(EMAC_TXC_DMAUND,val)
+#define bfin_read_EMAC_TXC_CRSERR()          bfin_read32(EMAC_TXC_CRSERR)
+#define bfin_write_EMAC_TXC_CRSERR(val)      bfin_write32(EMAC_TXC_CRSERR,val)
+#define bfin_read_EMAC_TXC_UNICST()          bfin_read32(EMAC_TXC_UNICST)
+#define bfin_write_EMAC_TXC_UNICST(val)      bfin_write32(EMAC_TXC_UNICST,val)
+#define bfin_read_EMAC_TXC_MULTI()           bfin_read32(EMAC_TXC_MULTI)
+#define bfin_write_EMAC_TXC_MULTI(val)       bfin_write32(EMAC_TXC_MULTI,val)
+#define bfin_read_EMAC_TXC_BROAD()           bfin_read32(EMAC_TXC_BROAD)
+#define bfin_write_EMAC_TXC_BROAD(val)       bfin_write32(EMAC_TXC_BROAD,val)
+#define bfin_read_EMAC_TXC_XS_DFR()          bfin_read32(EMAC_TXC_XS_DFR)
+#define bfin_write_EMAC_TXC_XS_DFR(val)      bfin_write32(EMAC_TXC_XS_DFR,val)
+#define bfin_read_EMAC_TXC_MACCTL()          bfin_read32(EMAC_TXC_MACCTL)
+#define bfin_write_EMAC_TXC_MACCTL(val)      bfin_write32(EMAC_TXC_MACCTL,val)
+#define bfin_read_EMAC_TXC_ALLFRM()          bfin_read32(EMAC_TXC_ALLFRM)
+#define bfin_write_EMAC_TXC_ALLFRM(val)      bfin_write32(EMAC_TXC_ALLFRM,val)
+#define bfin_read_EMAC_TXC_ALLOCT()          bfin_read32(EMAC_TXC_ALLOCT)
+#define bfin_write_EMAC_TXC_ALLOCT(val)      bfin_write32(EMAC_TXC_ALLOCT,val)
+#define bfin_read_EMAC_TXC_EQ64()            bfin_read32(EMAC_TXC_EQ64)
+#define bfin_write_EMAC_TXC_EQ64(val)        bfin_write32(EMAC_TXC_EQ64,val)
+#define bfin_read_EMAC_TXC_LT128()           bfin_read32(EMAC_TXC_LT128)
+#define bfin_write_EMAC_TXC_LT128(val)       bfin_write32(EMAC_TXC_LT128,val)
+#define bfin_read_EMAC_TXC_LT256()           bfin_read32(EMAC_TXC_LT256)
+#define bfin_write_EMAC_TXC_LT256(val)       bfin_write32(EMAC_TXC_LT256,val)
+#define bfin_read_EMAC_TXC_LT512()           bfin_read32(EMAC_TXC_LT512)
+#define bfin_write_EMAC_TXC_LT512(val)       bfin_write32(EMAC_TXC_LT512,val)
+#define bfin_read_EMAC_TXC_LT1024()          bfin_read32(EMAC_TXC_LT1024)
+#define bfin_write_EMAC_TXC_LT1024(val)      bfin_write32(EMAC_TXC_LT1024,val)
+#define bfin_read_EMAC_TXC_GE1024()          bfin_read32(EMAC_TXC_GE1024)
+#define bfin_write_EMAC_TXC_GE1024(val)      bfin_write32(EMAC_TXC_GE1024,val)
+#define bfin_read_EMAC_TXC_ABORT()           bfin_read32(EMAC_TXC_ABORT)
+#define bfin_write_EMAC_TXC_ABORT(val)       bfin_write32(EMAC_TXC_ABORT,val)
+
+#endif				/* _CDEF_BF537_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/defBF534.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/defBF534.h
new file mode 100644
index 0000000..ef6a98c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -0,0 +1,1470 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF534_H
+#define _DEF_BF534_H
+
+/************************************************************************************
+** System MMR Register Map
+*************************************************************************************/
+/* Clock and System Control	(0xFFC00000 - 0xFFC000FF)								*/
+#define PLL_CTL				0xFFC00000	/* PLL Control Register                                         */
+#define PLL_DIV				0xFFC00004	/* PLL Divide Register                                          */
+#define VR_CTL				0xFFC00008	/* Voltage Regulator Control Register           */
+#define PLL_STAT			0xFFC0000C	/* PLL Status Register                                          */
+#define PLL_LOCKCNT			0xFFC00010	/* PLL Lock Count Register                                      */
+#define CHIPID				0xFFC00014      /* Chip ID Register                                             */
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF)							*/
+#define SWRST				0xFFC00100	/* Software Reset Register                                      */
+#define SYSCR				0xFFC00104	/* System Configuration Register                        */
+#define SIC_RVECT			0xFFC00108	/* Interrupt Reset Vector Address Register      */
+#define SIC_IMASK			0xFFC0010C	/* Interrupt Mask Register                                      */
+#define SIC_IAR0			0xFFC00110	/* Interrupt Assignment Register 0                      */
+#define SIC_IAR1			0xFFC00114	/* Interrupt Assignment Register 1                      */
+#define SIC_IAR2			0xFFC00118	/* Interrupt Assignment Register 2                      */
+#define SIC_IAR3			0xFFC0011C	/* Interrupt Assignment Register 3                      */
+#define SIC_ISR				0xFFC00120	/* Interrupt Status Register                            */
+#define SIC_IWR				0xFFC00124	/* Interrupt Wakeup Register                            */
+
+/* Watchdog Timer			(0xFFC00200 - 0xFFC002FF)								*/
+#define WDOG_CTL			0xFFC00200	/* Watchdog Control Register                            */
+#define WDOG_CNT			0xFFC00204	/* Watchdog Count Register                                      */
+#define WDOG_STAT			0xFFC00208	/* Watchdog Status Register                                     */
+
+/* Real Time Clock		(0xFFC00300 - 0xFFC003FF)									*/
+#define RTC_STAT			0xFFC00300	/* RTC Status Register                                          */
+#define RTC_ICTL			0xFFC00304	/* RTC Interrupt Control Register                       */
+#define RTC_ISTAT			0xFFC00308	/* RTC Interrupt Status Register                        */
+#define RTC_SWCNT			0xFFC0030C	/* RTC Stopwatch Count Register                         */
+#define RTC_ALARM			0xFFC00310	/* RTC Alarm Time Register                                      */
+#define RTC_FAST			0xFFC00314	/* RTC Prescaler Enable Register                        */
+#define RTC_PREN			0xFFC00314	/* RTC Prescaler Enable Alternate Macro         */
+
+/* UART0 Controller		(0xFFC00400 - 0xFFC004FF)									*/
+#define UART0_THR			0xFFC00400	/* Transmit Holding register                            */
+#define UART0_RBR			0xFFC00400	/* Receive Buffer register                                      */
+#define UART0_DLL			0xFFC00400	/* Divisor Latch (Low-Byte)                                     */
+#define UART0_IER			0xFFC00404	/* Interrupt Enable Register                            */
+#define UART0_DLH			0xFFC00404	/* Divisor Latch (High-Byte)                            */
+#define UART0_IIR			0xFFC00408	/* Interrupt Identification Register            */
+#define UART0_LCR			0xFFC0040C	/* Line Control Register                                        */
+#define UART0_MCR			0xFFC00410	/* Modem Control Register                                       */
+#define UART0_LSR			0xFFC00414	/* Line Status Register                                         */
+#define UART0_MSR			0xFFC00418	/* Modem Status Register                                        */
+#define UART0_SCR			0xFFC0041C	/* SCR Scratch Register                                         */
+#define UART0_GCTL			0xFFC00424	/* Global Control Register                                      */
+
+/* SPI Controller			(0xFFC00500 - 0xFFC005FF)								*/
+#define SPI0_REGBASE			0xFFC00500
+#define SPI_CTL				0xFFC00500	/* SPI Control Register                                         */
+#define SPI_FLG				0xFFC00504	/* SPI Flag register                                            */
+#define SPI_STAT			0xFFC00508	/* SPI Status register                                          */
+#define SPI_TDBR			0xFFC0050C	/* SPI Transmit Data Buffer Register            */
+#define SPI_RDBR			0xFFC00510	/* SPI Receive Data Buffer Register                     */
+#define SPI_BAUD			0xFFC00514	/* SPI Baud rate Register                                       */
+#define SPI_SHADOW			0xFFC00518	/* SPI_RDBR Shadow Register                                     */
+
+/* TIMER0-7 Registers		(0xFFC00600 - 0xFFC006FF)								*/
+#define TIMER0_CONFIG		0xFFC00600	/* Timer 0 Configuration Register                       */
+#define TIMER0_COUNTER		0xFFC00604	/* Timer 0 Counter Register                                     */
+#define TIMER0_PERIOD		0xFFC00608	/* Timer 0 Period Register                                      */
+#define TIMER0_WIDTH		0xFFC0060C	/* Timer 0 Width Register                                       */
+
+#define TIMER1_CONFIG		0xFFC00610	/* Timer 1 Configuration Register                       */
+#define TIMER1_COUNTER		0xFFC00614	/* Timer 1 Counter Register                             */
+#define TIMER1_PERIOD		0xFFC00618	/* Timer 1 Period Register                              */
+#define TIMER1_WIDTH		0xFFC0061C	/* Timer 1 Width Register                               */
+
+#define TIMER2_CONFIG		0xFFC00620	/* Timer 2 Configuration Register                       */
+#define TIMER2_COUNTER		0xFFC00624	/* Timer 2 Counter Register                             */
+#define TIMER2_PERIOD		0xFFC00628	/* Timer 2 Period Register                              */
+#define TIMER2_WIDTH		0xFFC0062C	/* Timer 2 Width Register                               */
+
+#define TIMER3_CONFIG		0xFFC00630	/* Timer 3 Configuration Register                       */
+#define TIMER3_COUNTER		0xFFC00634	/* Timer 3 Counter Register                                     */
+#define TIMER3_PERIOD		0xFFC00638	/* Timer 3 Period Register                                      */
+#define TIMER3_WIDTH		0xFFC0063C	/* Timer 3 Width Register                                       */
+
+#define TIMER4_CONFIG		0xFFC00640	/* Timer 4 Configuration Register                       */
+#define TIMER4_COUNTER		0xFFC00644	/* Timer 4 Counter Register                             */
+#define TIMER4_PERIOD		0xFFC00648	/* Timer 4 Period Register                              */
+#define TIMER4_WIDTH		0xFFC0064C	/* Timer 4 Width Register                               */
+
+#define TIMER5_CONFIG		0xFFC00650	/* Timer 5 Configuration Register                       */
+#define TIMER5_COUNTER		0xFFC00654	/* Timer 5 Counter Register                             */
+#define TIMER5_PERIOD		0xFFC00658	/* Timer 5 Period Register                              */
+#define TIMER5_WIDTH		0xFFC0065C	/* Timer 5 Width Register                               */
+
+#define TIMER6_CONFIG		0xFFC00660	/* Timer 6 Configuration Register                       */
+#define TIMER6_COUNTER		0xFFC00664	/* Timer 6 Counter Register                             */
+#define TIMER6_PERIOD		0xFFC00668	/* Timer 6 Period Register                              */
+#define TIMER6_WIDTH		0xFFC0066C	/* Timer 6 Width Register                               */
+
+#define TIMER7_CONFIG		0xFFC00670	/* Timer 7 Configuration Register                       */
+#define TIMER7_COUNTER		0xFFC00674	/* Timer 7 Counter Register                             */
+#define TIMER7_PERIOD		0xFFC00678	/* Timer 7 Period Register                              */
+#define TIMER7_WIDTH		0xFFC0067C	/* Timer 7 Width Register                               */
+
+#define TIMER_ENABLE		0xFFC00680	/* Timer Enable Register                                        */
+#define TIMER_DISABLE		0xFFC00684	/* Timer Disable Register                                       */
+#define TIMER_STATUS		0xFFC00688	/* Timer Status Register                                        */
+
+/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF)												*/
+#define PORTFIO					0xFFC00700	/* Port F I/O Pin State Specify Register                                */
+#define PORTFIO_CLEAR			0xFFC00704	/* Port F I/O Peripheral Interrupt Clear Register               */
+#define PORTFIO_SET				0xFFC00708	/* Port F I/O Peripheral Interrupt Set Register                 */
+#define PORTFIO_TOGGLE			0xFFC0070C	/* Port F I/O Pin State Toggle Register                                 */
+#define PORTFIO_MASKA			0xFFC00710	/* Port F I/O Mask State Specify Interrupt A Register   */
+#define PORTFIO_MASKA_CLEAR		0xFFC00714	/* Port F I/O Mask Disable Interrupt A Register                 */
+#define PORTFIO_MASKA_SET		0xFFC00718	/* Port F I/O Mask Enable Interrupt A Register                  */
+#define PORTFIO_MASKA_TOGGLE	0xFFC0071C	/* Port F I/O Mask Toggle Enable Interrupt A Register   */
+#define PORTFIO_MASKB			0xFFC00720	/* Port F I/O Mask State Specify Interrupt B Register   */
+#define PORTFIO_MASKB_CLEAR		0xFFC00724	/* Port F I/O Mask Disable Interrupt B Register                 */
+#define PORTFIO_MASKB_SET		0xFFC00728	/* Port F I/O Mask Enable Interrupt B Register                  */
+#define PORTFIO_MASKB_TOGGLE	0xFFC0072C	/* Port F I/O Mask Toggle Enable Interrupt B Register   */
+#define PORTFIO_DIR				0xFFC00730	/* Port F I/O Direction Register                                                */
+#define PORTFIO_POLAR			0xFFC00734	/* Port F I/O Source Polarity Register                                  */
+#define PORTFIO_EDGE			0xFFC00738	/* Port F I/O Source Sensitivity Register                               */
+#define PORTFIO_BOTH			0xFFC0073C	/* Port F I/O Set on BOTH Edges Register                                */
+#define PORTFIO_INEN			0xFFC00740	/* Port F I/O Input Enable Register                                     */
+
+/* SPORT0 Controller		(0xFFC00800 - 0xFFC008FF)										*/
+#define SPORT0_TCR1			0xFFC00800	/* SPORT0 Transmit Configuration 1 Register                     */
+#define SPORT0_TCR2			0xFFC00804	/* SPORT0 Transmit Configuration 2 Register                     */
+#define SPORT0_TCLKDIV		0xFFC00808	/* SPORT0 Transmit Clock Divider                                        */
+#define SPORT0_TFSDIV		0xFFC0080C	/* SPORT0 Transmit Frame Sync Divider                           */
+#define SPORT0_TX			0xFFC00810	/* SPORT0 TX Data Register                                                      */
+#define SPORT0_RX			0xFFC00818	/* SPORT0 RX Data Register                                                      */
+#define SPORT0_RCR1			0xFFC00820	/* SPORT0 Transmit Configuration 1 Register                     */
+#define SPORT0_RCR2			0xFFC00824	/* SPORT0 Transmit Configuration 2 Register                     */
+#define SPORT0_RCLKDIV		0xFFC00828	/* SPORT0 Receive Clock Divider                                         */
+#define SPORT0_RFSDIV		0xFFC0082C	/* SPORT0 Receive Frame Sync Divider                            */
+#define SPORT0_STAT			0xFFC00830	/* SPORT0 Status Register                                                       */
+#define SPORT0_CHNL			0xFFC00834	/* SPORT0 Current Channel Register                                      */
+#define SPORT0_MCMC1		0xFFC00838	/* SPORT0 Multi-Channel Configuration Register 1        */
+#define SPORT0_MCMC2		0xFFC0083C	/* SPORT0 Multi-Channel Configuration Register 2        */
+#define SPORT0_MTCS0		0xFFC00840	/* SPORT0 Multi-Channel Transmit Select Register 0      */
+#define SPORT0_MTCS1		0xFFC00844	/* SPORT0 Multi-Channel Transmit Select Register 1      */
+#define SPORT0_MTCS2		0xFFC00848	/* SPORT0 Multi-Channel Transmit Select Register 2      */
+#define SPORT0_MTCS3		0xFFC0084C	/* SPORT0 Multi-Channel Transmit Select Register 3      */
+#define SPORT0_MRCS0		0xFFC00850	/* SPORT0 Multi-Channel Receive Select Register 0       */
+#define SPORT0_MRCS1		0xFFC00854	/* SPORT0 Multi-Channel Receive Select Register 1       */
+#define SPORT0_MRCS2		0xFFC00858	/* SPORT0 Multi-Channel Receive Select Register 2       */
+#define SPORT0_MRCS3		0xFFC0085C	/* SPORT0 Multi-Channel Receive Select Register 3       */
+
+/* SPORT1 Controller		(0xFFC00900 - 0xFFC009FF)										*/
+#define SPORT1_TCR1			0xFFC00900	/* SPORT1 Transmit Configuration 1 Register                     */
+#define SPORT1_TCR2			0xFFC00904	/* SPORT1 Transmit Configuration 2 Register                     */
+#define SPORT1_TCLKDIV		0xFFC00908	/* SPORT1 Transmit Clock Divider                                        */
+#define SPORT1_TFSDIV		0xFFC0090C	/* SPORT1 Transmit Frame Sync Divider                           */
+#define SPORT1_TX			0xFFC00910	/* SPORT1 TX Data Register                                                      */
+#define SPORT1_RX			0xFFC00918	/* SPORT1 RX Data Register                                                      */
+#define SPORT1_RCR1			0xFFC00920	/* SPORT1 Transmit Configuration 1 Register                     */
+#define SPORT1_RCR2			0xFFC00924	/* SPORT1 Transmit Configuration 2 Register                     */
+#define SPORT1_RCLKDIV		0xFFC00928	/* SPORT1 Receive Clock Divider                                         */
+#define SPORT1_RFSDIV		0xFFC0092C	/* SPORT1 Receive Frame Sync Divider                            */
+#define SPORT1_STAT			0xFFC00930	/* SPORT1 Status Register                                                       */
+#define SPORT1_CHNL			0xFFC00934	/* SPORT1 Current Channel Register                                      */
+#define SPORT1_MCMC1		0xFFC00938	/* SPORT1 Multi-Channel Configuration Register 1        */
+#define SPORT1_MCMC2		0xFFC0093C	/* SPORT1 Multi-Channel Configuration Register 2        */
+#define SPORT1_MTCS0		0xFFC00940	/* SPORT1 Multi-Channel Transmit Select Register 0      */
+#define SPORT1_MTCS1		0xFFC00944	/* SPORT1 Multi-Channel Transmit Select Register 1      */
+#define SPORT1_MTCS2		0xFFC00948	/* SPORT1 Multi-Channel Transmit Select Register 2      */
+#define SPORT1_MTCS3		0xFFC0094C	/* SPORT1 Multi-Channel Transmit Select Register 3      */
+#define SPORT1_MRCS0		0xFFC00950	/* SPORT1 Multi-Channel Receive Select Register 0       */
+#define SPORT1_MRCS1		0xFFC00954	/* SPORT1 Multi-Channel Receive Select Register 1       */
+#define SPORT1_MRCS2		0xFFC00958	/* SPORT1 Multi-Channel Receive Select Register 2       */
+#define SPORT1_MRCS3		0xFFC0095C	/* SPORT1 Multi-Channel Receive Select Register 3       */
+
+/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF)								*/
+#define EBIU_AMGCTL			0xFFC00A00	/* Asynchronous Memory Global Control Register  */
+#define EBIU_AMBCTL0		0xFFC00A04	/* Asynchronous Memory Bank Control Register 0  */
+#define EBIU_AMBCTL1		0xFFC00A08	/* Asynchronous Memory Bank Control Register 1  */
+#define EBIU_SDGCTL			0xFFC00A10	/* SDRAM Global Control Register                                */
+#define EBIU_SDBCTL			0xFFC00A14	/* SDRAM Bank Control Register                                  */
+#define EBIU_SDRRC			0xFFC00A18	/* SDRAM Refresh Rate Control Register                  */
+#define EBIU_SDSTAT			0xFFC00A1C	/* SDRAM Status Register                                                */
+
+/* DMA Traffic Control Registers													*/
+#define DMAC_TC_PER			0xFFC00B0C	/* Traffic Control Periods Register			*/
+#define DMAC_TC_CNT			0xFFC00B10	/* Traffic Control Current Counts Register	*/
+
+/* DMA Controller (0xFFC00C00 - 0xFFC00FFF)															*/
+#define DMA0_NEXT_DESC_PTR		0xFFC00C00	/* DMA Channel 0 Next Descriptor Pointer Register               */
+#define DMA0_START_ADDR			0xFFC00C04	/* DMA Channel 0 Start Address Register                                 */
+#define DMA0_CONFIG				0xFFC00C08	/* DMA Channel 0 Configuration Register                                 */
+#define DMA0_X_COUNT			0xFFC00C10	/* DMA Channel 0 X Count Register                                               */
+#define DMA0_X_MODIFY			0xFFC00C14	/* DMA Channel 0 X Modify Register                                              */
+#define DMA0_Y_COUNT			0xFFC00C18	/* DMA Channel 0 Y Count Register                                               */
+#define DMA0_Y_MODIFY			0xFFC00C1C	/* DMA Channel 0 Y Modify Register                                              */
+#define DMA0_CURR_DESC_PTR		0xFFC00C20	/* DMA Channel 0 Current Descriptor Pointer Register    */
+#define DMA0_CURR_ADDR			0xFFC00C24	/* DMA Channel 0 Current Address Register                               */
+#define DMA0_IRQ_STATUS			0xFFC00C28	/* DMA Channel 0 Interrupt/Status Register                              */
+#define DMA0_PERIPHERAL_MAP		0xFFC00C2C	/* DMA Channel 0 Peripheral Map Register                                */
+#define DMA0_CURR_X_COUNT		0xFFC00C30	/* DMA Channel 0 Current X Count Register                               */
+#define DMA0_CURR_Y_COUNT		0xFFC00C38	/* DMA Channel 0 Current Y Count Register                               */
+
+#define DMA1_NEXT_DESC_PTR		0xFFC00C40	/* DMA Channel 1 Next Descriptor Pointer Register               */
+#define DMA1_START_ADDR			0xFFC00C44	/* DMA Channel 1 Start Address Register                                 */
+#define DMA1_CONFIG				0xFFC00C48	/* DMA Channel 1 Configuration Register                                 */
+#define DMA1_X_COUNT			0xFFC00C50	/* DMA Channel 1 X Count Register                                               */
+#define DMA1_X_MODIFY			0xFFC00C54	/* DMA Channel 1 X Modify Register                                              */
+#define DMA1_Y_COUNT			0xFFC00C58	/* DMA Channel 1 Y Count Register                                               */
+#define DMA1_Y_MODIFY			0xFFC00C5C	/* DMA Channel 1 Y Modify Register                                              */
+#define DMA1_CURR_DESC_PTR		0xFFC00C60	/* DMA Channel 1 Current Descriptor Pointer Register    */
+#define DMA1_CURR_ADDR			0xFFC00C64	/* DMA Channel 1 Current Address Register                               */
+#define DMA1_IRQ_STATUS			0xFFC00C68	/* DMA Channel 1 Interrupt/Status Register                              */
+#define DMA1_PERIPHERAL_MAP		0xFFC00C6C	/* DMA Channel 1 Peripheral Map Register                                */
+#define DMA1_CURR_X_COUNT		0xFFC00C70	/* DMA Channel 1 Current X Count Register                               */
+#define DMA1_CURR_Y_COUNT		0xFFC00C78	/* DMA Channel 1 Current Y Count Register                               */
+
+#define DMA2_NEXT_DESC_PTR		0xFFC00C80	/* DMA Channel 2 Next Descriptor Pointer Register               */
+#define DMA2_START_ADDR			0xFFC00C84	/* DMA Channel 2 Start Address Register                                 */
+#define DMA2_CONFIG				0xFFC00C88	/* DMA Channel 2 Configuration Register                                 */
+#define DMA2_X_COUNT			0xFFC00C90	/* DMA Channel 2 X Count Register                                               */
+#define DMA2_X_MODIFY			0xFFC00C94	/* DMA Channel 2 X Modify Register                                              */
+#define DMA2_Y_COUNT			0xFFC00C98	/* DMA Channel 2 Y Count Register                                               */
+#define DMA2_Y_MODIFY			0xFFC00C9C	/* DMA Channel 2 Y Modify Register                                              */
+#define DMA2_CURR_DESC_PTR		0xFFC00CA0	/* DMA Channel 2 Current Descriptor Pointer Register    */
+#define DMA2_CURR_ADDR			0xFFC00CA4	/* DMA Channel 2 Current Address Register                               */
+#define DMA2_IRQ_STATUS			0xFFC00CA8	/* DMA Channel 2 Interrupt/Status Register                              */
+#define DMA2_PERIPHERAL_MAP		0xFFC00CAC	/* DMA Channel 2 Peripheral Map Register                                */
+#define DMA2_CURR_X_COUNT		0xFFC00CB0	/* DMA Channel 2 Current X Count Register                               */
+#define DMA2_CURR_Y_COUNT		0xFFC00CB8	/* DMA Channel 2 Current Y Count Register                               */
+
+#define DMA3_NEXT_DESC_PTR		0xFFC00CC0	/* DMA Channel 3 Next Descriptor Pointer Register               */
+#define DMA3_START_ADDR			0xFFC00CC4	/* DMA Channel 3 Start Address Register                                 */
+#define DMA3_CONFIG				0xFFC00CC8	/* DMA Channel 3 Configuration Register                                 */
+#define DMA3_X_COUNT			0xFFC00CD0	/* DMA Channel 3 X Count Register                                               */
+#define DMA3_X_MODIFY			0xFFC00CD4	/* DMA Channel 3 X Modify Register                                              */
+#define DMA3_Y_COUNT			0xFFC00CD8	/* DMA Channel 3 Y Count Register                                               */
+#define DMA3_Y_MODIFY			0xFFC00CDC	/* DMA Channel 3 Y Modify Register                                              */
+#define DMA3_CURR_DESC_PTR		0xFFC00CE0	/* DMA Channel 3 Current Descriptor Pointer Register    */
+#define DMA3_CURR_ADDR			0xFFC00CE4	/* DMA Channel 3 Current Address Register                               */
+#define DMA3_IRQ_STATUS			0xFFC00CE8	/* DMA Channel 3 Interrupt/Status Register                              */
+#define DMA3_PERIPHERAL_MAP		0xFFC00CEC	/* DMA Channel 3 Peripheral Map Register                                */
+#define DMA3_CURR_X_COUNT		0xFFC00CF0	/* DMA Channel 3 Current X Count Register                               */
+#define DMA3_CURR_Y_COUNT		0xFFC00CF8	/* DMA Channel 3 Current Y Count Register                               */
+
+#define DMA4_NEXT_DESC_PTR		0xFFC00D00	/* DMA Channel 4 Next Descriptor Pointer Register               */
+#define DMA4_START_ADDR			0xFFC00D04	/* DMA Channel 4 Start Address Register                                 */
+#define DMA4_CONFIG				0xFFC00D08	/* DMA Channel 4 Configuration Register                                 */
+#define DMA4_X_COUNT			0xFFC00D10	/* DMA Channel 4 X Count Register                                               */
+#define DMA4_X_MODIFY			0xFFC00D14	/* DMA Channel 4 X Modify Register                                              */
+#define DMA4_Y_COUNT			0xFFC00D18	/* DMA Channel 4 Y Count Register                                               */
+#define DMA4_Y_MODIFY			0xFFC00D1C	/* DMA Channel 4 Y Modify Register                                              */
+#define DMA4_CURR_DESC_PTR		0xFFC00D20	/* DMA Channel 4 Current Descriptor Pointer Register    */
+#define DMA4_CURR_ADDR			0xFFC00D24	/* DMA Channel 4 Current Address Register                               */
+#define DMA4_IRQ_STATUS			0xFFC00D28	/* DMA Channel 4 Interrupt/Status Register                              */
+#define DMA4_PERIPHERAL_MAP		0xFFC00D2C	/* DMA Channel 4 Peripheral Map Register                                */
+#define DMA4_CURR_X_COUNT		0xFFC00D30	/* DMA Channel 4 Current X Count Register                               */
+#define DMA4_CURR_Y_COUNT		0xFFC00D38	/* DMA Channel 4 Current Y Count Register                               */
+
+#define DMA5_NEXT_DESC_PTR		0xFFC00D40	/* DMA Channel 5 Next Descriptor Pointer Register               */
+#define DMA5_START_ADDR			0xFFC00D44	/* DMA Channel 5 Start Address Register                                 */
+#define DMA5_CONFIG				0xFFC00D48	/* DMA Channel 5 Configuration Register                                 */
+#define DMA5_X_COUNT			0xFFC00D50	/* DMA Channel 5 X Count Register                                               */
+#define DMA5_X_MODIFY			0xFFC00D54	/* DMA Channel 5 X Modify Register                                              */
+#define DMA5_Y_COUNT			0xFFC00D58	/* DMA Channel 5 Y Count Register                                               */
+#define DMA5_Y_MODIFY			0xFFC00D5C	/* DMA Channel 5 Y Modify Register                                              */
+#define DMA5_CURR_DESC_PTR		0xFFC00D60	/* DMA Channel 5 Current Descriptor Pointer Register    */
+#define DMA5_CURR_ADDR			0xFFC00D64	/* DMA Channel 5 Current Address Register                               */
+#define DMA5_IRQ_STATUS			0xFFC00D68	/* DMA Channel 5 Interrupt/Status Register                              */
+#define DMA5_PERIPHERAL_MAP		0xFFC00D6C	/* DMA Channel 5 Peripheral Map Register                                */
+#define DMA5_CURR_X_COUNT		0xFFC00D70	/* DMA Channel 5 Current X Count Register                               */
+#define DMA5_CURR_Y_COUNT		0xFFC00D78	/* DMA Channel 5 Current Y Count Register                               */
+
+#define DMA6_NEXT_DESC_PTR		0xFFC00D80	/* DMA Channel 6 Next Descriptor Pointer Register               */
+#define DMA6_START_ADDR			0xFFC00D84	/* DMA Channel 6 Start Address Register                                 */
+#define DMA6_CONFIG				0xFFC00D88	/* DMA Channel 6 Configuration Register                                 */
+#define DMA6_X_COUNT			0xFFC00D90	/* DMA Channel 6 X Count Register                                               */
+#define DMA6_X_MODIFY			0xFFC00D94	/* DMA Channel 6 X Modify Register                                              */
+#define DMA6_Y_COUNT			0xFFC00D98	/* DMA Channel 6 Y Count Register                                               */
+#define DMA6_Y_MODIFY			0xFFC00D9C	/* DMA Channel 6 Y Modify Register                                              */
+#define DMA6_CURR_DESC_PTR		0xFFC00DA0	/* DMA Channel 6 Current Descriptor Pointer Register    */
+#define DMA6_CURR_ADDR			0xFFC00DA4	/* DMA Channel 6 Current Address Register                               */
+#define DMA6_IRQ_STATUS			0xFFC00DA8	/* DMA Channel 6 Interrupt/Status Register                              */
+#define DMA6_PERIPHERAL_MAP		0xFFC00DAC	/* DMA Channel 6 Peripheral Map Register                                */
+#define DMA6_CURR_X_COUNT		0xFFC00DB0	/* DMA Channel 6 Current X Count Register                               */
+#define DMA6_CURR_Y_COUNT		0xFFC00DB8	/* DMA Channel 6 Current Y Count Register                               */
+
+#define DMA7_NEXT_DESC_PTR		0xFFC00DC0	/* DMA Channel 7 Next Descriptor Pointer Register               */
+#define DMA7_START_ADDR			0xFFC00DC4	/* DMA Channel 7 Start Address Register                                 */
+#define DMA7_CONFIG				0xFFC00DC8	/* DMA Channel 7 Configuration Register                                 */
+#define DMA7_X_COUNT			0xFFC00DD0	/* DMA Channel 7 X Count Register                                               */
+#define DMA7_X_MODIFY			0xFFC00DD4	/* DMA Channel 7 X Modify Register                                              */
+#define DMA7_Y_COUNT			0xFFC00DD8	/* DMA Channel 7 Y Count Register                                               */
+#define DMA7_Y_MODIFY			0xFFC00DDC	/* DMA Channel 7 Y Modify Register                                              */
+#define DMA7_CURR_DESC_PTR		0xFFC00DE0	/* DMA Channel 7 Current Descriptor Pointer Register    */
+#define DMA7_CURR_ADDR			0xFFC00DE4	/* DMA Channel 7 Current Address Register                               */
+#define DMA7_IRQ_STATUS			0xFFC00DE8	/* DMA Channel 7 Interrupt/Status Register                              */
+#define DMA7_PERIPHERAL_MAP		0xFFC00DEC	/* DMA Channel 7 Peripheral Map Register                                */
+#define DMA7_CURR_X_COUNT		0xFFC00DF0	/* DMA Channel 7 Current X Count Register                               */
+#define DMA7_CURR_Y_COUNT		0xFFC00DF8	/* DMA Channel 7 Current Y Count Register                               */
+
+#define DMA8_NEXT_DESC_PTR		0xFFC00E00	/* DMA Channel 8 Next Descriptor Pointer Register               */
+#define DMA8_START_ADDR			0xFFC00E04	/* DMA Channel 8 Start Address Register                                 */
+#define DMA8_CONFIG				0xFFC00E08	/* DMA Channel 8 Configuration Register                                 */
+#define DMA8_X_COUNT			0xFFC00E10	/* DMA Channel 8 X Count Register                                               */
+#define DMA8_X_MODIFY			0xFFC00E14	/* DMA Channel 8 X Modify Register                                              */
+#define DMA8_Y_COUNT			0xFFC00E18	/* DMA Channel 8 Y Count Register                                               */
+#define DMA8_Y_MODIFY			0xFFC00E1C	/* DMA Channel 8 Y Modify Register                                              */
+#define DMA8_CURR_DESC_PTR		0xFFC00E20	/* DMA Channel 8 Current Descriptor Pointer Register    */
+#define DMA8_CURR_ADDR			0xFFC00E24	/* DMA Channel 8 Current Address Register                               */
+#define DMA8_IRQ_STATUS			0xFFC00E28	/* DMA Channel 8 Interrupt/Status Register                              */
+#define DMA8_PERIPHERAL_MAP		0xFFC00E2C	/* DMA Channel 8 Peripheral Map Register                                */
+#define DMA8_CURR_X_COUNT		0xFFC00E30	/* DMA Channel 8 Current X Count Register                               */
+#define DMA8_CURR_Y_COUNT		0xFFC00E38	/* DMA Channel 8 Current Y Count Register                               */
+
+#define DMA9_NEXT_DESC_PTR		0xFFC00E40	/* DMA Channel 9 Next Descriptor Pointer Register               */
+#define DMA9_START_ADDR			0xFFC00E44	/* DMA Channel 9 Start Address Register                                 */
+#define DMA9_CONFIG				0xFFC00E48	/* DMA Channel 9 Configuration Register                                 */
+#define DMA9_X_COUNT			0xFFC00E50	/* DMA Channel 9 X Count Register                                               */
+#define DMA9_X_MODIFY			0xFFC00E54	/* DMA Channel 9 X Modify Register                                              */
+#define DMA9_Y_COUNT			0xFFC00E58	/* DMA Channel 9 Y Count Register                                               */
+#define DMA9_Y_MODIFY			0xFFC00E5C	/* DMA Channel 9 Y Modify Register                                              */
+#define DMA9_CURR_DESC_PTR		0xFFC00E60	/* DMA Channel 9 Current Descriptor Pointer Register    */
+#define DMA9_CURR_ADDR			0xFFC00E64	/* DMA Channel 9 Current Address Register                               */
+#define DMA9_IRQ_STATUS			0xFFC00E68	/* DMA Channel 9 Interrupt/Status Register                              */
+#define DMA9_PERIPHERAL_MAP		0xFFC00E6C	/* DMA Channel 9 Peripheral Map Register                                */
+#define DMA9_CURR_X_COUNT		0xFFC00E70	/* DMA Channel 9 Current X Count Register                               */
+#define DMA9_CURR_Y_COUNT		0xFFC00E78	/* DMA Channel 9 Current Y Count Register                               */
+
+#define DMA10_NEXT_DESC_PTR		0xFFC00E80	/* DMA Channel 10 Next Descriptor Pointer Register              */
+#define DMA10_START_ADDR		0xFFC00E84	/* DMA Channel 10 Start Address Register                                */
+#define DMA10_CONFIG			0xFFC00E88	/* DMA Channel 10 Configuration Register                                */
+#define DMA10_X_COUNT			0xFFC00E90	/* DMA Channel 10 X Count Register                                              */
+#define DMA10_X_MODIFY			0xFFC00E94	/* DMA Channel 10 X Modify Register                                             */
+#define DMA10_Y_COUNT			0xFFC00E98	/* DMA Channel 10 Y Count Register                                              */
+#define DMA10_Y_MODIFY			0xFFC00E9C	/* DMA Channel 10 Y Modify Register                                             */
+#define DMA10_CURR_DESC_PTR		0xFFC00EA0	/* DMA Channel 10 Current Descriptor Pointer Register   */
+#define DMA10_CURR_ADDR			0xFFC00EA4	/* DMA Channel 10 Current Address Register                              */
+#define DMA10_IRQ_STATUS		0xFFC00EA8	/* DMA Channel 10 Interrupt/Status Register                             */
+#define DMA10_PERIPHERAL_MAP	0xFFC00EAC	/* DMA Channel 10 Peripheral Map Register                               */
+#define DMA10_CURR_X_COUNT		0xFFC00EB0	/* DMA Channel 10 Current X Count Register                              */
+#define DMA10_CURR_Y_COUNT		0xFFC00EB8	/* DMA Channel 10 Current Y Count Register                              */
+
+#define DMA11_NEXT_DESC_PTR		0xFFC00EC0	/* DMA Channel 11 Next Descriptor Pointer Register              */
+#define DMA11_START_ADDR		0xFFC00EC4	/* DMA Channel 11 Start Address Register                                */
+#define DMA11_CONFIG			0xFFC00EC8	/* DMA Channel 11 Configuration Register                                */
+#define DMA11_X_COUNT			0xFFC00ED0	/* DMA Channel 11 X Count Register                                              */
+#define DMA11_X_MODIFY			0xFFC00ED4	/* DMA Channel 11 X Modify Register                                             */
+#define DMA11_Y_COUNT			0xFFC00ED8	/* DMA Channel 11 Y Count Register                                              */
+#define DMA11_Y_MODIFY			0xFFC00EDC	/* DMA Channel 11 Y Modify Register                                             */
+#define DMA11_CURR_DESC_PTR		0xFFC00EE0	/* DMA Channel 11 Current Descriptor Pointer Register   */
+#define DMA11_CURR_ADDR			0xFFC00EE4	/* DMA Channel 11 Current Address Register                              */
+#define DMA11_IRQ_STATUS		0xFFC00EE8	/* DMA Channel 11 Interrupt/Status Register                             */
+#define DMA11_PERIPHERAL_MAP	0xFFC00EEC	/* DMA Channel 11 Peripheral Map Register                               */
+#define DMA11_CURR_X_COUNT		0xFFC00EF0	/* DMA Channel 11 Current X Count Register                              */
+#define DMA11_CURR_Y_COUNT		0xFFC00EF8	/* DMA Channel 11 Current Y Count Register                              */
+
+#define MDMA_D0_NEXT_DESC_PTR	0xFFC00F00	/* MemDMA Stream 0 Destination Next Descriptor Pointer Register         */
+#define MDMA_D0_START_ADDR		0xFFC00F04	/* MemDMA Stream 0 Destination Start Address Register                           */
+#define MDMA_D0_CONFIG			0xFFC00F08	/* MemDMA Stream 0 Destination Configuration Register                           */
+#define MDMA_D0_X_COUNT			0xFFC00F10	/* MemDMA Stream 0 Destination X Count Register                                         */
+#define MDMA_D0_X_MODIFY		0xFFC00F14	/* MemDMA Stream 0 Destination X Modify Register                                        */
+#define MDMA_D0_Y_COUNT			0xFFC00F18	/* MemDMA Stream 0 Destination Y Count Register                                         */
+#define MDMA_D0_Y_MODIFY		0xFFC00F1C	/* MemDMA Stream 0 Destination Y Modify Register                                        */
+#define MDMA_D0_CURR_DESC_PTR	0xFFC00F20	/* MemDMA Stream 0 Destination Current Descriptor Pointer Register      */
+#define MDMA_D0_CURR_ADDR		0xFFC00F24	/* MemDMA Stream 0 Destination Current Address Register                         */
+#define MDMA_D0_IRQ_STATUS		0xFFC00F28	/* MemDMA Stream 0 Destination Interrupt/Status Register                        */
+#define MDMA_D0_PERIPHERAL_MAP	0xFFC00F2C	/* MemDMA Stream 0 Destination Peripheral Map Register                          */
+#define MDMA_D0_CURR_X_COUNT	0xFFC00F30	/* MemDMA Stream 0 Destination Current X Count Register                         */
+#define MDMA_D0_CURR_Y_COUNT	0xFFC00F38	/* MemDMA Stream 0 Destination Current Y Count Register                         */
+
+#define MDMA_S0_NEXT_DESC_PTR	0xFFC00F40	/* MemDMA Stream 0 Source Next Descriptor Pointer Register                      */
+#define MDMA_S0_START_ADDR		0xFFC00F44	/* MemDMA Stream 0 Source Start Address Register                                        */
+#define MDMA_S0_CONFIG			0xFFC00F48	/* MemDMA Stream 0 Source Configuration Register                                        */
+#define MDMA_S0_X_COUNT			0xFFC00F50	/* MemDMA Stream 0 Source X Count Register                                                      */
+#define MDMA_S0_X_MODIFY		0xFFC00F54	/* MemDMA Stream 0 Source X Modify Register                                                     */
+#define MDMA_S0_Y_COUNT			0xFFC00F58	/* MemDMA Stream 0 Source Y Count Register                                                      */
+#define MDMA_S0_Y_MODIFY		0xFFC00F5C	/* MemDMA Stream 0 Source Y Modify Register                                                     */
+#define MDMA_S0_CURR_DESC_PTR	0xFFC00F60	/* MemDMA Stream 0 Source Current Descriptor Pointer Register           */
+#define MDMA_S0_CURR_ADDR		0xFFC00F64	/* MemDMA Stream 0 Source Current Address Register                                      */
+#define MDMA_S0_IRQ_STATUS		0xFFC00F68	/* MemDMA Stream 0 Source Interrupt/Status Register                                     */
+#define MDMA_S0_PERIPHERAL_MAP	0xFFC00F6C	/* MemDMA Stream 0 Source Peripheral Map Register                                       */
+#define MDMA_S0_CURR_X_COUNT	0xFFC00F70	/* MemDMA Stream 0 Source Current X Count Register                                      */
+#define MDMA_S0_CURR_Y_COUNT	0xFFC00F78	/* MemDMA Stream 0 Source Current Y Count Register                                      */
+
+#define MDMA_D1_NEXT_DESC_PTR	0xFFC00F80	/* MemDMA Stream 1 Destination Next Descriptor Pointer Register         */
+#define MDMA_D1_START_ADDR		0xFFC00F84	/* MemDMA Stream 1 Destination Start Address Register                           */
+#define MDMA_D1_CONFIG			0xFFC00F88	/* MemDMA Stream 1 Destination Configuration Register                           */
+#define MDMA_D1_X_COUNT			0xFFC00F90	/* MemDMA Stream 1 Destination X Count Register                                         */
+#define MDMA_D1_X_MODIFY		0xFFC00F94	/* MemDMA Stream 1 Destination X Modify Register                                        */
+#define MDMA_D1_Y_COUNT			0xFFC00F98	/* MemDMA Stream 1 Destination Y Count Register                                         */
+#define MDMA_D1_Y_MODIFY		0xFFC00F9C	/* MemDMA Stream 1 Destination Y Modify Register                                        */
+#define MDMA_D1_CURR_DESC_PTR	0xFFC00FA0	/* MemDMA Stream 1 Destination Current Descriptor Pointer Register      */
+#define MDMA_D1_CURR_ADDR		0xFFC00FA4	/* MemDMA Stream 1 Destination Current Address Register                         */
+#define MDMA_D1_IRQ_STATUS		0xFFC00FA8	/* MemDMA Stream 1 Destination Interrupt/Status Register                        */
+#define MDMA_D1_PERIPHERAL_MAP	0xFFC00FAC	/* MemDMA Stream 1 Destination Peripheral Map Register                          */
+#define MDMA_D1_CURR_X_COUNT	0xFFC00FB0	/* MemDMA Stream 1 Destination Current X Count Register                         */
+#define MDMA_D1_CURR_Y_COUNT	0xFFC00FB8	/* MemDMA Stream 1 Destination Current Y Count Register                         */
+
+#define MDMA_S1_NEXT_DESC_PTR	0xFFC00FC0	/* MemDMA Stream 1 Source Next Descriptor Pointer Register                      */
+#define MDMA_S1_START_ADDR		0xFFC00FC4	/* MemDMA Stream 1 Source Start Address Register                                        */
+#define MDMA_S1_CONFIG			0xFFC00FC8	/* MemDMA Stream 1 Source Configuration Register                                        */
+#define MDMA_S1_X_COUNT			0xFFC00FD0	/* MemDMA Stream 1 Source X Count Register                                                      */
+#define MDMA_S1_X_MODIFY		0xFFC00FD4	/* MemDMA Stream 1 Source X Modify Register                                                     */
+#define MDMA_S1_Y_COUNT			0xFFC00FD8	/* MemDMA Stream 1 Source Y Count Register                                                      */
+#define MDMA_S1_Y_MODIFY		0xFFC00FDC	/* MemDMA Stream 1 Source Y Modify Register                                                     */
+#define MDMA_S1_CURR_DESC_PTR	0xFFC00FE0	/* MemDMA Stream 1 Source Current Descriptor Pointer Register           */
+#define MDMA_S1_CURR_ADDR		0xFFC00FE4	/* MemDMA Stream 1 Source Current Address Register                                      */
+#define MDMA_S1_IRQ_STATUS		0xFFC00FE8	/* MemDMA Stream 1 Source Interrupt/Status Register                                     */
+#define MDMA_S1_PERIPHERAL_MAP	0xFFC00FEC	/* MemDMA Stream 1 Source Peripheral Map Register                                       */
+#define MDMA_S1_CURR_X_COUNT	0xFFC00FF0	/* MemDMA Stream 1 Source Current X Count Register                                      */
+#define MDMA_S1_CURR_Y_COUNT	0xFFC00FF8	/* MemDMA Stream 1 Source Current Y Count Register                                      */
+
+/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF)				*/
+#define PPI_CONTROL			0xFFC01000	/* PPI Control Register                 */
+#define PPI_STATUS			0xFFC01004	/* PPI Status Register                  */
+#define PPI_COUNT			0xFFC01008	/* PPI Transfer Count Register  */
+#define PPI_DELAY			0xFFC0100C	/* PPI Delay Count Register             */
+#define PPI_FRAME			0xFFC01010	/* PPI Frame Length Register    */
+
+/* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF)								*/
+#define TWI0_REGBASE			0xFFC01400
+#define TWI0_CLKDIV			0xFFC01400	/* Serial Clock Divider Register                        */
+#define TWI0_CONTROL			0xFFC01404	/* TWI Control Register                                         */
+#define TWI0_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register                          */
+#define TWI0_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register                           */
+#define TWI0_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register                          */
+#define TWI0_MASTER_CTL		0xFFC01414	/* Master Mode Control Register                         */
+#define TWI0_MASTER_STAT		0xFFC01418	/* Master Mode Status Register                          */
+#define TWI0_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register                         */
+#define TWI0_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register                        */
+#define TWI0_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register           */
+#define TWI0_FIFO_CTL		0xFFC01428	/* FIFO Control Register                                        */
+#define TWI0_FIFO_STAT		0xFFC0142C	/* FIFO Status Register                                         */
+#define TWI0_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register      */
+#define TWI0_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register      */
+#define TWI0_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register       */
+#define TWI0_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register       */
+
+/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)												*/
+#define PORTGIO					0xFFC01500	/* Port G I/O Pin State Specify Register                                */
+#define PORTGIO_CLEAR			0xFFC01504	/* Port G I/O Peripheral Interrupt Clear Register               */
+#define PORTGIO_SET				0xFFC01508	/* Port G I/O Peripheral Interrupt Set Register                 */
+#define PORTGIO_TOGGLE			0xFFC0150C	/* Port G I/O Pin State Toggle Register                                 */
+#define PORTGIO_MASKA			0xFFC01510	/* Port G I/O Mask State Specify Interrupt A Register   */
+#define PORTGIO_MASKA_CLEAR		0xFFC01514	/* Port G I/O Mask Disable Interrupt A Register                 */
+#define PORTGIO_MASKA_SET		0xFFC01518	/* Port G I/O Mask Enable Interrupt A Register                  */
+#define PORTGIO_MASKA_TOGGLE	0xFFC0151C	/* Port G I/O Mask Toggle Enable Interrupt A Register   */
+#define PORTGIO_MASKB			0xFFC01520	/* Port G I/O Mask State Specify Interrupt B Register   */
+#define PORTGIO_MASKB_CLEAR		0xFFC01524	/* Port G I/O Mask Disable Interrupt B Register                 */
+#define PORTGIO_MASKB_SET		0xFFC01528	/* Port G I/O Mask Enable Interrupt B Register                  */
+#define PORTGIO_MASKB_TOGGLE	0xFFC0152C	/* Port G I/O Mask Toggle Enable Interrupt B Register   */
+#define PORTGIO_DIR				0xFFC01530	/* Port G I/O Direction Register                                                */
+#define PORTGIO_POLAR			0xFFC01534	/* Port G I/O Source Polarity Register                                  */
+#define PORTGIO_EDGE			0xFFC01538	/* Port G I/O Source Sensitivity Register                               */
+#define PORTGIO_BOTH			0xFFC0153C	/* Port G I/O Set on BOTH Edges Register                                */
+#define PORTGIO_INEN			0xFFC01540	/* Port G I/O Input Enable Register                                             */
+
+/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF)												*/
+#define PORTHIO					0xFFC01700	/* Port H I/O Pin State Specify Register                                */
+#define PORTHIO_CLEAR			0xFFC01704	/* Port H I/O Peripheral Interrupt Clear Register               */
+#define PORTHIO_SET				0xFFC01708	/* Port H I/O Peripheral Interrupt Set Register                 */
+#define PORTHIO_TOGGLE			0xFFC0170C	/* Port H I/O Pin State Toggle Register                                 */
+#define PORTHIO_MASKA			0xFFC01710	/* Port H I/O Mask State Specify Interrupt A Register   */
+#define PORTHIO_MASKA_CLEAR		0xFFC01714	/* Port H I/O Mask Disable Interrupt A Register                 */
+#define PORTHIO_MASKA_SET		0xFFC01718	/* Port H I/O Mask Enable Interrupt A Register                  */
+#define PORTHIO_MASKA_TOGGLE	0xFFC0171C	/* Port H I/O Mask Toggle Enable Interrupt A Register   */
+#define PORTHIO_MASKB			0xFFC01720	/* Port H I/O Mask State Specify Interrupt B Register   */
+#define PORTHIO_MASKB_CLEAR		0xFFC01724	/* Port H I/O Mask Disable Interrupt B Register                 */
+#define PORTHIO_MASKB_SET		0xFFC01728	/* Port H I/O Mask Enable Interrupt B Register                  */
+#define PORTHIO_MASKB_TOGGLE	0xFFC0172C	/* Port H I/O Mask Toggle Enable Interrupt B Register   */
+#define PORTHIO_DIR				0xFFC01730	/* Port H I/O Direction Register                                                */
+#define PORTHIO_POLAR			0xFFC01734	/* Port H I/O Source Polarity Register                                  */
+#define PORTHIO_EDGE			0xFFC01738	/* Port H I/O Source Sensitivity Register                               */
+#define PORTHIO_BOTH			0xFFC0173C	/* Port H I/O Set on BOTH Edges Register                                */
+#define PORTHIO_INEN			0xFFC01740	/* Port H I/O Input Enable Register                                             */
+
+/* UART1 Controller		(0xFFC02000 - 0xFFC020FF)								*/
+#define UART1_THR			0xFFC02000	/* Transmit Holding register                    */
+#define UART1_RBR			0xFFC02000	/* Receive Buffer register                              */
+#define UART1_DLL			0xFFC02000	/* Divisor Latch (Low-Byte)                             */
+#define UART1_IER			0xFFC02004	/* Interrupt Enable Register                    */
+#define UART1_DLH			0xFFC02004	/* Divisor Latch (High-Byte)                    */
+#define UART1_IIR			0xFFC02008	/* Interrupt Identification Register    */
+#define UART1_LCR			0xFFC0200C	/* Line Control Register                                */
+#define UART1_MCR			0xFFC02010	/* Modem Control Register                               */
+#define UART1_LSR			0xFFC02014	/* Line Status Register                                 */
+#define UART1_MSR			0xFFC02018	/* Modem Status Register                                */
+#define UART1_SCR			0xFFC0201C	/* SCR Scratch Register                                 */
+#define UART1_GCTL			0xFFC02024	/* Global Control Register                              */
+
+/* CAN Controller		(0xFFC02A00 - 0xFFC02FFF)										*/
+/* For Mailboxes 0-15																	*/
+#define CAN_MC1				0xFFC02A00	/* Mailbox config reg 1                                                 */
+#define CAN_MD1				0xFFC02A04	/* Mailbox direction reg 1                                              */
+#define CAN_TRS1			0xFFC02A08	/* Transmit Request Set reg 1                                   */
+#define CAN_TRR1			0xFFC02A0C	/* Transmit Request Reset reg 1                                 */
+#define CAN_TA1				0xFFC02A10	/* Transmit Acknowledge reg 1                                   */
+#define CAN_AA1				0xFFC02A14	/* Transmit Abort Acknowledge reg 1                             */
+#define CAN_RMP1			0xFFC02A18	/* Receive Message Pending reg 1                                */
+#define CAN_RML1			0xFFC02A1C	/* Receive Message Lost reg 1                                   */
+#define CAN_MBTIF1			0xFFC02A20	/* Mailbox Transmit Interrupt Flag reg 1                */
+#define CAN_MBRIF1			0xFFC02A24	/* Mailbox Receive  Interrupt Flag reg 1                */
+#define CAN_MBIM1			0xFFC02A28	/* Mailbox Interrupt Mask reg 1                                 */
+#define CAN_RFH1			0xFFC02A2C	/* Remote Frame Handling reg 1                                  */
+#define CAN_OPSS1			0xFFC02A30	/* Overwrite Protection Single Shot Xmit reg 1  */
+
+/* For Mailboxes 16-31   																*/
+#define CAN_MC2				0xFFC02A40	/* Mailbox config reg 2                                                 */
+#define CAN_MD2				0xFFC02A44	/* Mailbox direction reg 2                                              */
+#define CAN_TRS2			0xFFC02A48	/* Transmit Request Set reg 2                                   */
+#define CAN_TRR2			0xFFC02A4C	/* Transmit Request Reset reg 2                                 */
+#define CAN_TA2				0xFFC02A50	/* Transmit Acknowledge reg 2                                   */
+#define CAN_AA2				0xFFC02A54	/* Transmit Abort Acknowledge reg 2                             */
+#define CAN_RMP2			0xFFC02A58	/* Receive Message Pending reg 2                                */
+#define CAN_RML2			0xFFC02A5C	/* Receive Message Lost reg 2                                   */
+#define CAN_MBTIF2			0xFFC02A60	/* Mailbox Transmit Interrupt Flag reg 2                */
+#define CAN_MBRIF2			0xFFC02A64	/* Mailbox Receive  Interrupt Flag reg 2                */
+#define CAN_MBIM2			0xFFC02A68	/* Mailbox Interrupt Mask reg 2                                 */
+#define CAN_RFH2			0xFFC02A6C	/* Remote Frame Handling reg 2                                  */
+#define CAN_OPSS2			0xFFC02A70	/* Overwrite Protection Single Shot Xmit reg 2  */
+
+/* CAN Configuration, Control, and Status Registers										*/
+#define CAN_CLOCK			0xFFC02A80	/* Bit Timing Configuration register 0                  */
+#define CAN_TIMING			0xFFC02A84	/* Bit Timing Configuration register 1                  */
+#define CAN_DEBUG			0xFFC02A88	/* Debug Register                                                               */
+#define CAN_STATUS			0xFFC02A8C	/* Global Status Register                                               */
+#define CAN_CEC				0xFFC02A90	/* Error Counter Register                                               */
+#define CAN_GIS				0xFFC02A94	/* Global Interrupt Status Register                             */
+#define CAN_GIM				0xFFC02A98	/* Global Interrupt Mask Register                               */
+#define CAN_GIF				0xFFC02A9C	/* Global Interrupt Flag Register                               */
+#define CAN_CONTROL			0xFFC02AA0	/* Master Control Register                                              */
+#define CAN_INTR			0xFFC02AA4	/* Interrupt Pending Register                                   */
+
+#define CAN_MBTD			0xFFC02AAC	/* Mailbox Temporary Disable Feature                    */
+#define CAN_EWR				0xFFC02AB0	/* Programmable Warning Level                                   */
+#define CAN_ESR				0xFFC02AB4	/* Error Status Register                                                */
+#define CAN_UCREG			0xFFC02AC0	/* Universal Counter Register/Capture Register  */
+#define CAN_UCCNT			0xFFC02AC4	/* Universal Counter                                                    */
+#define CAN_UCRC			0xFFC02AC8	/* Universal Counter Force Reload Register              */
+#define CAN_UCCNF			0xFFC02ACC	/* Universal Counter Configuration Register             */
+
+/* Mailbox Acceptance Masks 												*/
+#define CAN_AM00L			0xFFC02B00	/* Mailbox 0 Low Acceptance Mask        */
+#define CAN_AM00H			0xFFC02B04	/* Mailbox 0 High Acceptance Mask       */
+#define CAN_AM01L			0xFFC02B08	/* Mailbox 1 Low Acceptance Mask        */
+#define CAN_AM01H			0xFFC02B0C	/* Mailbox 1 High Acceptance Mask       */
+#define CAN_AM02L			0xFFC02B10	/* Mailbox 2 Low Acceptance Mask        */
+#define CAN_AM02H			0xFFC02B14	/* Mailbox 2 High Acceptance Mask       */
+#define CAN_AM03L			0xFFC02B18	/* Mailbox 3 Low Acceptance Mask        */
+#define CAN_AM03H			0xFFC02B1C	/* Mailbox 3 High Acceptance Mask       */
+#define CAN_AM04L			0xFFC02B20	/* Mailbox 4 Low Acceptance Mask        */
+#define CAN_AM04H			0xFFC02B24	/* Mailbox 4 High Acceptance Mask       */
+#define CAN_AM05L			0xFFC02B28	/* Mailbox 5 Low Acceptance Mask        */
+#define CAN_AM05H			0xFFC02B2C	/* Mailbox 5 High Acceptance Mask       */
+#define CAN_AM06L			0xFFC02B30	/* Mailbox 6 Low Acceptance Mask        */
+#define CAN_AM06H			0xFFC02B34	/* Mailbox 6 High Acceptance Mask       */
+#define CAN_AM07L			0xFFC02B38	/* Mailbox 7 Low Acceptance Mask        */
+#define CAN_AM07H			0xFFC02B3C	/* Mailbox 7 High Acceptance Mask       */
+#define CAN_AM08L			0xFFC02B40	/* Mailbox 8 Low Acceptance Mask        */
+#define CAN_AM08H			0xFFC02B44	/* Mailbox 8 High Acceptance Mask       */
+#define CAN_AM09L			0xFFC02B48	/* Mailbox 9 Low Acceptance Mask        */
+#define CAN_AM09H			0xFFC02B4C	/* Mailbox 9 High Acceptance Mask       */
+#define CAN_AM10L			0xFFC02B50	/* Mailbox 10 Low Acceptance Mask       */
+#define CAN_AM10H			0xFFC02B54	/* Mailbox 10 High Acceptance Mask      */
+#define CAN_AM11L			0xFFC02B58	/* Mailbox 11 Low Acceptance Mask       */
+#define CAN_AM11H			0xFFC02B5C	/* Mailbox 11 High Acceptance Mask      */
+#define CAN_AM12L			0xFFC02B60	/* Mailbox 12 Low Acceptance Mask       */
+#define CAN_AM12H			0xFFC02B64	/* Mailbox 12 High Acceptance Mask      */
+#define CAN_AM13L			0xFFC02B68	/* Mailbox 13 Low Acceptance Mask       */
+#define CAN_AM13H			0xFFC02B6C	/* Mailbox 13 High Acceptance Mask      */
+#define CAN_AM14L			0xFFC02B70	/* Mailbox 14 Low Acceptance Mask       */
+#define CAN_AM14H			0xFFC02B74	/* Mailbox 14 High Acceptance Mask      */
+#define CAN_AM15L			0xFFC02B78	/* Mailbox 15 Low Acceptance Mask       */
+#define CAN_AM15H			0xFFC02B7C	/* Mailbox 15 High Acceptance Mask      */
+
+#define CAN_AM16L			0xFFC02B80	/* Mailbox 16 Low Acceptance Mask       */
+#define CAN_AM16H			0xFFC02B84	/* Mailbox 16 High Acceptance Mask      */
+#define CAN_AM17L			0xFFC02B88	/* Mailbox 17 Low Acceptance Mask       */
+#define CAN_AM17H			0xFFC02B8C	/* Mailbox 17 High Acceptance Mask      */
+#define CAN_AM18L			0xFFC02B90	/* Mailbox 18 Low Acceptance Mask       */
+#define CAN_AM18H			0xFFC02B94	/* Mailbox 18 High Acceptance Mask      */
+#define CAN_AM19L			0xFFC02B98	/* Mailbox 19 Low Acceptance Mask       */
+#define CAN_AM19H			0xFFC02B9C	/* Mailbox 19 High Acceptance Mask      */
+#define CAN_AM20L			0xFFC02BA0	/* Mailbox 20 Low Acceptance Mask       */
+#define CAN_AM20H			0xFFC02BA4	/* Mailbox 20 High Acceptance Mask      */
+#define CAN_AM21L			0xFFC02BA8	/* Mailbox 21 Low Acceptance Mask       */
+#define CAN_AM21H			0xFFC02BAC	/* Mailbox 21 High Acceptance Mask      */
+#define CAN_AM22L			0xFFC02BB0	/* Mailbox 22 Low Acceptance Mask       */
+#define CAN_AM22H			0xFFC02BB4	/* Mailbox 22 High Acceptance Mask      */
+#define CAN_AM23L			0xFFC02BB8	/* Mailbox 23 Low Acceptance Mask       */
+#define CAN_AM23H			0xFFC02BBC	/* Mailbox 23 High Acceptance Mask      */
+#define CAN_AM24L			0xFFC02BC0	/* Mailbox 24 Low Acceptance Mask       */
+#define CAN_AM24H			0xFFC02BC4	/* Mailbox 24 High Acceptance Mask      */
+#define CAN_AM25L			0xFFC02BC8	/* Mailbox 25 Low Acceptance Mask       */
+#define CAN_AM25H			0xFFC02BCC	/* Mailbox 25 High Acceptance Mask      */
+#define CAN_AM26L			0xFFC02BD0	/* Mailbox 26 Low Acceptance Mask       */
+#define CAN_AM26H			0xFFC02BD4	/* Mailbox 26 High Acceptance Mask      */
+#define CAN_AM27L			0xFFC02BD8	/* Mailbox 27 Low Acceptance Mask       */
+#define CAN_AM27H			0xFFC02BDC	/* Mailbox 27 High Acceptance Mask      */
+#define CAN_AM28L			0xFFC02BE0	/* Mailbox 28 Low Acceptance Mask       */
+#define CAN_AM28H			0xFFC02BE4	/* Mailbox 28 High Acceptance Mask      */
+#define CAN_AM29L			0xFFC02BE8	/* Mailbox 29 Low Acceptance Mask       */
+#define CAN_AM29H			0xFFC02BEC	/* Mailbox 29 High Acceptance Mask      */
+#define CAN_AM30L			0xFFC02BF0	/* Mailbox 30 Low Acceptance Mask       */
+#define CAN_AM30H			0xFFC02BF4	/* Mailbox 30 High Acceptance Mask      */
+#define CAN_AM31L			0xFFC02BF8	/* Mailbox 31 Low Acceptance Mask       */
+#define CAN_AM31H			0xFFC02BFC	/* Mailbox 31 High Acceptance Mask      */
+
+/* CAN Acceptance Mask Macros				*/
+#define CAN_AM_L(x)		(CAN_AM00L+((x)*0x8))
+#define CAN_AM_H(x)		(CAN_AM00H+((x)*0x8))
+
+/* Mailbox Registers																*/
+#define CAN_MB00_DATA0		0xFFC02C00	/* Mailbox 0 Data Word 0 [15:0] Register        */
+#define CAN_MB00_DATA1		0xFFC02C04	/* Mailbox 0 Data Word 1 [31:16] Register       */
+#define CAN_MB00_DATA2		0xFFC02C08	/* Mailbox 0 Data Word 2 [47:32] Register       */
+#define CAN_MB00_DATA3		0xFFC02C0C	/* Mailbox 0 Data Word 3 [63:48] Register       */
+#define CAN_MB00_LENGTH		0xFFC02C10	/* Mailbox 0 Data Length Code Register          */
+#define CAN_MB00_TIMESTAMP	0xFFC02C14	/* Mailbox 0 Time Stamp Value Register          */
+#define CAN_MB00_ID0		0xFFC02C18	/* Mailbox 0 Identifier Low Register            */
+#define CAN_MB00_ID1		0xFFC02C1C	/* Mailbox 0 Identifier High Register           */
+
+#define CAN_MB01_DATA0		0xFFC02C20	/* Mailbox 1 Data Word 0 [15:0] Register        */
+#define CAN_MB01_DATA1		0xFFC02C24	/* Mailbox 1 Data Word 1 [31:16] Register       */
+#define CAN_MB01_DATA2		0xFFC02C28	/* Mailbox 1 Data Word 2 [47:32] Register       */
+#define CAN_MB01_DATA3		0xFFC02C2C	/* Mailbox 1 Data Word 3 [63:48] Register       */
+#define CAN_MB01_LENGTH		0xFFC02C30	/* Mailbox 1 Data Length Code Register          */
+#define CAN_MB01_TIMESTAMP	0xFFC02C34	/* Mailbox 1 Time Stamp Value Register          */
+#define CAN_MB01_ID0		0xFFC02C38	/* Mailbox 1 Identifier Low Register            */
+#define CAN_MB01_ID1		0xFFC02C3C	/* Mailbox 1 Identifier High Register           */
+
+#define CAN_MB02_DATA0		0xFFC02C40	/* Mailbox 2 Data Word 0 [15:0] Register        */
+#define CAN_MB02_DATA1		0xFFC02C44	/* Mailbox 2 Data Word 1 [31:16] Register       */
+#define CAN_MB02_DATA2		0xFFC02C48	/* Mailbox 2 Data Word 2 [47:32] Register       */
+#define CAN_MB02_DATA3		0xFFC02C4C	/* Mailbox 2 Data Word 3 [63:48] Register       */
+#define CAN_MB02_LENGTH		0xFFC02C50	/* Mailbox 2 Data Length Code Register          */
+#define CAN_MB02_TIMESTAMP	0xFFC02C54	/* Mailbox 2 Time Stamp Value Register          */
+#define CAN_MB02_ID0		0xFFC02C58	/* Mailbox 2 Identifier Low Register            */
+#define CAN_MB02_ID1		0xFFC02C5C	/* Mailbox 2 Identifier High Register           */
+
+#define CAN_MB03_DATA0		0xFFC02C60	/* Mailbox 3 Data Word 0 [15:0] Register        */
+#define CAN_MB03_DATA1		0xFFC02C64	/* Mailbox 3 Data Word 1 [31:16] Register       */
+#define CAN_MB03_DATA2		0xFFC02C68	/* Mailbox 3 Data Word 2 [47:32] Register       */
+#define CAN_MB03_DATA3		0xFFC02C6C	/* Mailbox 3 Data Word 3 [63:48] Register       */
+#define CAN_MB03_LENGTH		0xFFC02C70	/* Mailbox 3 Data Length Code Register          */
+#define CAN_MB03_TIMESTAMP	0xFFC02C74	/* Mailbox 3 Time Stamp Value Register          */
+#define CAN_MB03_ID0		0xFFC02C78	/* Mailbox 3 Identifier Low Register            */
+#define CAN_MB03_ID1		0xFFC02C7C	/* Mailbox 3 Identifier High Register           */
+
+#define CAN_MB04_DATA0		0xFFC02C80	/* Mailbox 4 Data Word 0 [15:0] Register        */
+#define CAN_MB04_DATA1		0xFFC02C84	/* Mailbox 4 Data Word 1 [31:16] Register       */
+#define CAN_MB04_DATA2		0xFFC02C88	/* Mailbox 4 Data Word 2 [47:32] Register       */
+#define CAN_MB04_DATA3		0xFFC02C8C	/* Mailbox 4 Data Word 3 [63:48] Register       */
+#define CAN_MB04_LENGTH		0xFFC02C90	/* Mailbox 4 Data Length Code Register          */
+#define CAN_MB04_TIMESTAMP	0xFFC02C94	/* Mailbox 4 Time Stamp Value Register          */
+#define CAN_MB04_ID0		0xFFC02C98	/* Mailbox 4 Identifier Low Register            */
+#define CAN_MB04_ID1		0xFFC02C9C	/* Mailbox 4 Identifier High Register           */
+
+#define CAN_MB05_DATA0		0xFFC02CA0	/* Mailbox 5 Data Word 0 [15:0] Register        */
+#define CAN_MB05_DATA1		0xFFC02CA4	/* Mailbox 5 Data Word 1 [31:16] Register       */
+#define CAN_MB05_DATA2		0xFFC02CA8	/* Mailbox 5 Data Word 2 [47:32] Register       */
+#define CAN_MB05_DATA3		0xFFC02CAC	/* Mailbox 5 Data Word 3 [63:48] Register       */
+#define CAN_MB05_LENGTH		0xFFC02CB0	/* Mailbox 5 Data Length Code Register          */
+#define CAN_MB05_TIMESTAMP	0xFFC02CB4	/* Mailbox 5 Time Stamp Value Register          */
+#define CAN_MB05_ID0		0xFFC02CB8	/* Mailbox 5 Identifier Low Register            */
+#define CAN_MB05_ID1		0xFFC02CBC	/* Mailbox 5 Identifier High Register           */
+
+#define CAN_MB06_DATA0		0xFFC02CC0	/* Mailbox 6 Data Word 0 [15:0] Register        */
+#define CAN_MB06_DATA1		0xFFC02CC4	/* Mailbox 6 Data Word 1 [31:16] Register       */
+#define CAN_MB06_DATA2		0xFFC02CC8	/* Mailbox 6 Data Word 2 [47:32] Register       */
+#define CAN_MB06_DATA3		0xFFC02CCC	/* Mailbox 6 Data Word 3 [63:48] Register       */
+#define CAN_MB06_LENGTH		0xFFC02CD0	/* Mailbox 6 Data Length Code Register          */
+#define CAN_MB06_TIMESTAMP	0xFFC02CD4	/* Mailbox 6 Time Stamp Value Register          */
+#define CAN_MB06_ID0		0xFFC02CD8	/* Mailbox 6 Identifier Low Register            */
+#define CAN_MB06_ID1		0xFFC02CDC	/* Mailbox 6 Identifier High Register           */
+
+#define CAN_MB07_DATA0		0xFFC02CE0	/* Mailbox 7 Data Word 0 [15:0] Register        */
+#define CAN_MB07_DATA1		0xFFC02CE4	/* Mailbox 7 Data Word 1 [31:16] Register       */
+#define CAN_MB07_DATA2		0xFFC02CE8	/* Mailbox 7 Data Word 2 [47:32] Register       */
+#define CAN_MB07_DATA3		0xFFC02CEC	/* Mailbox 7 Data Word 3 [63:48] Register       */
+#define CAN_MB07_LENGTH		0xFFC02CF0	/* Mailbox 7 Data Length Code Register          */
+#define CAN_MB07_TIMESTAMP	0xFFC02CF4	/* Mailbox 7 Time Stamp Value Register          */
+#define CAN_MB07_ID0		0xFFC02CF8	/* Mailbox 7 Identifier Low Register            */
+#define CAN_MB07_ID1		0xFFC02CFC	/* Mailbox 7 Identifier High Register           */
+
+#define CAN_MB08_DATA0		0xFFC02D00	/* Mailbox 8 Data Word 0 [15:0] Register        */
+#define CAN_MB08_DATA1		0xFFC02D04	/* Mailbox 8 Data Word 1 [31:16] Register       */
+#define CAN_MB08_DATA2		0xFFC02D08	/* Mailbox 8 Data Word 2 [47:32] Register       */
+#define CAN_MB08_DATA3		0xFFC02D0C	/* Mailbox 8 Data Word 3 [63:48] Register       */
+#define CAN_MB08_LENGTH		0xFFC02D10	/* Mailbox 8 Data Length Code Register          */
+#define CAN_MB08_TIMESTAMP	0xFFC02D14	/* Mailbox 8 Time Stamp Value Register          */
+#define CAN_MB08_ID0		0xFFC02D18	/* Mailbox 8 Identifier Low Register            */
+#define CAN_MB08_ID1		0xFFC02D1C	/* Mailbox 8 Identifier High Register           */
+
+#define CAN_MB09_DATA0		0xFFC02D20	/* Mailbox 9 Data Word 0 [15:0] Register        */
+#define CAN_MB09_DATA1		0xFFC02D24	/* Mailbox 9 Data Word 1 [31:16] Register       */
+#define CAN_MB09_DATA2		0xFFC02D28	/* Mailbox 9 Data Word 2 [47:32] Register       */
+#define CAN_MB09_DATA3		0xFFC02D2C	/* Mailbox 9 Data Word 3 [63:48] Register       */
+#define CAN_MB09_LENGTH		0xFFC02D30	/* Mailbox 9 Data Length Code Register          */
+#define CAN_MB09_TIMESTAMP	0xFFC02D34	/* Mailbox 9 Time Stamp Value Register          */
+#define CAN_MB09_ID0		0xFFC02D38	/* Mailbox 9 Identifier Low Register            */
+#define CAN_MB09_ID1		0xFFC02D3C	/* Mailbox 9 Identifier High Register           */
+
+#define CAN_MB10_DATA0		0xFFC02D40	/* Mailbox 10 Data Word 0 [15:0] Register       */
+#define CAN_MB10_DATA1		0xFFC02D44	/* Mailbox 10 Data Word 1 [31:16] Register      */
+#define CAN_MB10_DATA2		0xFFC02D48	/* Mailbox 10 Data Word 2 [47:32] Register      */
+#define CAN_MB10_DATA3		0xFFC02D4C	/* Mailbox 10 Data Word 3 [63:48] Register      */
+#define CAN_MB10_LENGTH		0xFFC02D50	/* Mailbox 10 Data Length Code Register         */
+#define CAN_MB10_TIMESTAMP	0xFFC02D54	/* Mailbox 10 Time Stamp Value Register         */
+#define CAN_MB10_ID0		0xFFC02D58	/* Mailbox 10 Identifier Low Register           */
+#define CAN_MB10_ID1		0xFFC02D5C	/* Mailbox 10 Identifier High Register          */
+
+#define CAN_MB11_DATA0		0xFFC02D60	/* Mailbox 11 Data Word 0 [15:0] Register       */
+#define CAN_MB11_DATA1		0xFFC02D64	/* Mailbox 11 Data Word 1 [31:16] Register      */
+#define CAN_MB11_DATA2		0xFFC02D68	/* Mailbox 11 Data Word 2 [47:32] Register      */
+#define CAN_MB11_DATA3		0xFFC02D6C	/* Mailbox 11 Data Word 3 [63:48] Register      */
+#define CAN_MB11_LENGTH		0xFFC02D70	/* Mailbox 11 Data Length Code Register         */
+#define CAN_MB11_TIMESTAMP	0xFFC02D74	/* Mailbox 11 Time Stamp Value Register         */
+#define CAN_MB11_ID0		0xFFC02D78	/* Mailbox 11 Identifier Low Register           */
+#define CAN_MB11_ID1		0xFFC02D7C	/* Mailbox 11 Identifier High Register          */
+
+#define CAN_MB12_DATA0		0xFFC02D80	/* Mailbox 12 Data Word 0 [15:0] Register       */
+#define CAN_MB12_DATA1		0xFFC02D84	/* Mailbox 12 Data Word 1 [31:16] Register      */
+#define CAN_MB12_DATA2		0xFFC02D88	/* Mailbox 12 Data Word 2 [47:32] Register      */
+#define CAN_MB12_DATA3		0xFFC02D8C	/* Mailbox 12 Data Word 3 [63:48] Register      */
+#define CAN_MB12_LENGTH		0xFFC02D90	/* Mailbox 12 Data Length Code Register         */
+#define CAN_MB12_TIMESTAMP	0xFFC02D94	/* Mailbox 12 Time Stamp Value Register         */
+#define CAN_MB12_ID0		0xFFC02D98	/* Mailbox 12 Identifier Low Register           */
+#define CAN_MB12_ID1		0xFFC02D9C	/* Mailbox 12 Identifier High Register          */
+
+#define CAN_MB13_DATA0		0xFFC02DA0	/* Mailbox 13 Data Word 0 [15:0] Register       */
+#define CAN_MB13_DATA1		0xFFC02DA4	/* Mailbox 13 Data Word 1 [31:16] Register      */
+#define CAN_MB13_DATA2		0xFFC02DA8	/* Mailbox 13 Data Word 2 [47:32] Register      */
+#define CAN_MB13_DATA3		0xFFC02DAC	/* Mailbox 13 Data Word 3 [63:48] Register      */
+#define CAN_MB13_LENGTH		0xFFC02DB0	/* Mailbox 13 Data Length Code Register         */
+#define CAN_MB13_TIMESTAMP	0xFFC02DB4	/* Mailbox 13 Time Stamp Value Register         */
+#define CAN_MB13_ID0		0xFFC02DB8	/* Mailbox 13 Identifier Low Register           */
+#define CAN_MB13_ID1		0xFFC02DBC	/* Mailbox 13 Identifier High Register          */
+
+#define CAN_MB14_DATA0		0xFFC02DC0	/* Mailbox 14 Data Word 0 [15:0] Register       */
+#define CAN_MB14_DATA1		0xFFC02DC4	/* Mailbox 14 Data Word 1 [31:16] Register      */
+#define CAN_MB14_DATA2		0xFFC02DC8	/* Mailbox 14 Data Word 2 [47:32] Register      */
+#define CAN_MB14_DATA3		0xFFC02DCC	/* Mailbox 14 Data Word 3 [63:48] Register      */
+#define CAN_MB14_LENGTH		0xFFC02DD0	/* Mailbox 14 Data Length Code Register         */
+#define CAN_MB14_TIMESTAMP	0xFFC02DD4	/* Mailbox 14 Time Stamp Value Register         */
+#define CAN_MB14_ID0		0xFFC02DD8	/* Mailbox 14 Identifier Low Register           */
+#define CAN_MB14_ID1		0xFFC02DDC	/* Mailbox 14 Identifier High Register          */
+
+#define CAN_MB15_DATA0		0xFFC02DE0	/* Mailbox 15 Data Word 0 [15:0] Register       */
+#define CAN_MB15_DATA1		0xFFC02DE4	/* Mailbox 15 Data Word 1 [31:16] Register      */
+#define CAN_MB15_DATA2		0xFFC02DE8	/* Mailbox 15 Data Word 2 [47:32] Register      */
+#define CAN_MB15_DATA3		0xFFC02DEC	/* Mailbox 15 Data Word 3 [63:48] Register      */
+#define CAN_MB15_LENGTH		0xFFC02DF0	/* Mailbox 15 Data Length Code Register         */
+#define CAN_MB15_TIMESTAMP	0xFFC02DF4	/* Mailbox 15 Time Stamp Value Register         */
+#define CAN_MB15_ID0		0xFFC02DF8	/* Mailbox 15 Identifier Low Register           */
+#define CAN_MB15_ID1		0xFFC02DFC	/* Mailbox 15 Identifier High Register          */
+
+#define CAN_MB16_DATA0		0xFFC02E00	/* Mailbox 16 Data Word 0 [15:0] Register       */
+#define CAN_MB16_DATA1		0xFFC02E04	/* Mailbox 16 Data Word 1 [31:16] Register      */
+#define CAN_MB16_DATA2		0xFFC02E08	/* Mailbox 16 Data Word 2 [47:32] Register      */
+#define CAN_MB16_DATA3		0xFFC02E0C	/* Mailbox 16 Data Word 3 [63:48] Register      */
+#define CAN_MB16_LENGTH		0xFFC02E10	/* Mailbox 16 Data Length Code Register         */
+#define CAN_MB16_TIMESTAMP	0xFFC02E14	/* Mailbox 16 Time Stamp Value Register         */
+#define CAN_MB16_ID0		0xFFC02E18	/* Mailbox 16 Identifier Low Register           */
+#define CAN_MB16_ID1		0xFFC02E1C	/* Mailbox 16 Identifier High Register          */
+
+#define CAN_MB17_DATA0		0xFFC02E20	/* Mailbox 17 Data Word 0 [15:0] Register       */
+#define CAN_MB17_DATA1		0xFFC02E24	/* Mailbox 17 Data Word 1 [31:16] Register      */
+#define CAN_MB17_DATA2		0xFFC02E28	/* Mailbox 17 Data Word 2 [47:32] Register      */
+#define CAN_MB17_DATA3		0xFFC02E2C	/* Mailbox 17 Data Word 3 [63:48] Register      */
+#define CAN_MB17_LENGTH		0xFFC02E30	/* Mailbox 17 Data Length Code Register         */
+#define CAN_MB17_TIMESTAMP	0xFFC02E34	/* Mailbox 17 Time Stamp Value Register         */
+#define CAN_MB17_ID0		0xFFC02E38	/* Mailbox 17 Identifier Low Register           */
+#define CAN_MB17_ID1		0xFFC02E3C	/* Mailbox 17 Identifier High Register          */
+
+#define CAN_MB18_DATA0		0xFFC02E40	/* Mailbox 18 Data Word 0 [15:0] Register       */
+#define CAN_MB18_DATA1		0xFFC02E44	/* Mailbox 18 Data Word 1 [31:16] Register      */
+#define CAN_MB18_DATA2		0xFFC02E48	/* Mailbox 18 Data Word 2 [47:32] Register      */
+#define CAN_MB18_DATA3		0xFFC02E4C	/* Mailbox 18 Data Word 3 [63:48] Register      */
+#define CAN_MB18_LENGTH		0xFFC02E50	/* Mailbox 18 Data Length Code Register         */
+#define CAN_MB18_TIMESTAMP	0xFFC02E54	/* Mailbox 18 Time Stamp Value Register         */
+#define CAN_MB18_ID0		0xFFC02E58	/* Mailbox 18 Identifier Low Register           */
+#define CAN_MB18_ID1		0xFFC02E5C	/* Mailbox 18 Identifier High Register          */
+
+#define CAN_MB19_DATA0		0xFFC02E60	/* Mailbox 19 Data Word 0 [15:0] Register       */
+#define CAN_MB19_DATA1		0xFFC02E64	/* Mailbox 19 Data Word 1 [31:16] Register      */
+#define CAN_MB19_DATA2		0xFFC02E68	/* Mailbox 19 Data Word 2 [47:32] Register      */
+#define CAN_MB19_DATA3		0xFFC02E6C	/* Mailbox 19 Data Word 3 [63:48] Register      */
+#define CAN_MB19_LENGTH		0xFFC02E70	/* Mailbox 19 Data Length Code Register         */
+#define CAN_MB19_TIMESTAMP	0xFFC02E74	/* Mailbox 19 Time Stamp Value Register         */
+#define CAN_MB19_ID0		0xFFC02E78	/* Mailbox 19 Identifier Low Register           */
+#define CAN_MB19_ID1		0xFFC02E7C	/* Mailbox 19 Identifier High Register          */
+
+#define CAN_MB20_DATA0		0xFFC02E80	/* Mailbox 20 Data Word 0 [15:0] Register       */
+#define CAN_MB20_DATA1		0xFFC02E84	/* Mailbox 20 Data Word 1 [31:16] Register      */
+#define CAN_MB20_DATA2		0xFFC02E88	/* Mailbox 20 Data Word 2 [47:32] Register      */
+#define CAN_MB20_DATA3		0xFFC02E8C	/* Mailbox 20 Data Word 3 [63:48] Register      */
+#define CAN_MB20_LENGTH		0xFFC02E90	/* Mailbox 20 Data Length Code Register         */
+#define CAN_MB20_TIMESTAMP	0xFFC02E94	/* Mailbox 20 Time Stamp Value Register         */
+#define CAN_MB20_ID0		0xFFC02E98	/* Mailbox 20 Identifier Low Register           */
+#define CAN_MB20_ID1		0xFFC02E9C	/* Mailbox 20 Identifier High Register          */
+
+#define CAN_MB21_DATA0		0xFFC02EA0	/* Mailbox 21 Data Word 0 [15:0] Register       */
+#define CAN_MB21_DATA1		0xFFC02EA4	/* Mailbox 21 Data Word 1 [31:16] Register      */
+#define CAN_MB21_DATA2		0xFFC02EA8	/* Mailbox 21 Data Word 2 [47:32] Register      */
+#define CAN_MB21_DATA3		0xFFC02EAC	/* Mailbox 21 Data Word 3 [63:48] Register      */
+#define CAN_MB21_LENGTH		0xFFC02EB0	/* Mailbox 21 Data Length Code Register         */
+#define CAN_MB21_TIMESTAMP	0xFFC02EB4	/* Mailbox 21 Time Stamp Value Register         */
+#define CAN_MB21_ID0		0xFFC02EB8	/* Mailbox 21 Identifier Low Register           */
+#define CAN_MB21_ID1		0xFFC02EBC	/* Mailbox 21 Identifier High Register          */
+
+#define CAN_MB22_DATA0		0xFFC02EC0	/* Mailbox 22 Data Word 0 [15:0] Register       */
+#define CAN_MB22_DATA1		0xFFC02EC4	/* Mailbox 22 Data Word 1 [31:16] Register      */
+#define CAN_MB22_DATA2		0xFFC02EC8	/* Mailbox 22 Data Word 2 [47:32] Register      */
+#define CAN_MB22_DATA3		0xFFC02ECC	/* Mailbox 22 Data Word 3 [63:48] Register      */
+#define CAN_MB22_LENGTH		0xFFC02ED0	/* Mailbox 22 Data Length Code Register         */
+#define CAN_MB22_TIMESTAMP	0xFFC02ED4	/* Mailbox 22 Time Stamp Value Register         */
+#define CAN_MB22_ID0		0xFFC02ED8	/* Mailbox 22 Identifier Low Register           */
+#define CAN_MB22_ID1		0xFFC02EDC	/* Mailbox 22 Identifier High Register          */
+
+#define CAN_MB23_DATA0		0xFFC02EE0	/* Mailbox 23 Data Word 0 [15:0] Register       */
+#define CAN_MB23_DATA1		0xFFC02EE4	/* Mailbox 23 Data Word 1 [31:16] Register      */
+#define CAN_MB23_DATA2		0xFFC02EE8	/* Mailbox 23 Data Word 2 [47:32] Register      */
+#define CAN_MB23_DATA3		0xFFC02EEC	/* Mailbox 23 Data Word 3 [63:48] Register      */
+#define CAN_MB23_LENGTH		0xFFC02EF0	/* Mailbox 23 Data Length Code Register         */
+#define CAN_MB23_TIMESTAMP	0xFFC02EF4	/* Mailbox 23 Time Stamp Value Register         */
+#define CAN_MB23_ID0		0xFFC02EF8	/* Mailbox 23 Identifier Low Register           */
+#define CAN_MB23_ID1		0xFFC02EFC	/* Mailbox 23 Identifier High Register          */
+
+#define CAN_MB24_DATA0		0xFFC02F00	/* Mailbox 24 Data Word 0 [15:0] Register       */
+#define CAN_MB24_DATA1		0xFFC02F04	/* Mailbox 24 Data Word 1 [31:16] Register      */
+#define CAN_MB24_DATA2		0xFFC02F08	/* Mailbox 24 Data Word 2 [47:32] Register      */
+#define CAN_MB24_DATA3		0xFFC02F0C	/* Mailbox 24 Data Word 3 [63:48] Register      */
+#define CAN_MB24_LENGTH		0xFFC02F10	/* Mailbox 24 Data Length Code Register         */
+#define CAN_MB24_TIMESTAMP	0xFFC02F14	/* Mailbox 24 Time Stamp Value Register         */
+#define CAN_MB24_ID0		0xFFC02F18	/* Mailbox 24 Identifier Low Register           */
+#define CAN_MB24_ID1		0xFFC02F1C	/* Mailbox 24 Identifier High Register          */
+
+#define CAN_MB25_DATA0		0xFFC02F20	/* Mailbox 25 Data Word 0 [15:0] Register       */
+#define CAN_MB25_DATA1		0xFFC02F24	/* Mailbox 25 Data Word 1 [31:16] Register      */
+#define CAN_MB25_DATA2		0xFFC02F28	/* Mailbox 25 Data Word 2 [47:32] Register      */
+#define CAN_MB25_DATA3		0xFFC02F2C	/* Mailbox 25 Data Word 3 [63:48] Register      */
+#define CAN_MB25_LENGTH		0xFFC02F30	/* Mailbox 25 Data Length Code Register         */
+#define CAN_MB25_TIMESTAMP	0xFFC02F34	/* Mailbox 25 Time Stamp Value Register         */
+#define CAN_MB25_ID0		0xFFC02F38	/* Mailbox 25 Identifier Low Register           */
+#define CAN_MB25_ID1		0xFFC02F3C	/* Mailbox 25 Identifier High Register          */
+
+#define CAN_MB26_DATA0		0xFFC02F40	/* Mailbox 26 Data Word 0 [15:0] Register       */
+#define CAN_MB26_DATA1		0xFFC02F44	/* Mailbox 26 Data Word 1 [31:16] Register      */
+#define CAN_MB26_DATA2		0xFFC02F48	/* Mailbox 26 Data Word 2 [47:32] Register      */
+#define CAN_MB26_DATA3		0xFFC02F4C	/* Mailbox 26 Data Word 3 [63:48] Register      */
+#define CAN_MB26_LENGTH		0xFFC02F50	/* Mailbox 26 Data Length Code Register         */
+#define CAN_MB26_TIMESTAMP	0xFFC02F54	/* Mailbox 26 Time Stamp Value Register         */
+#define CAN_MB26_ID0		0xFFC02F58	/* Mailbox 26 Identifier Low Register           */
+#define CAN_MB26_ID1		0xFFC02F5C	/* Mailbox 26 Identifier High Register          */
+
+#define CAN_MB27_DATA0		0xFFC02F60	/* Mailbox 27 Data Word 0 [15:0] Register       */
+#define CAN_MB27_DATA1		0xFFC02F64	/* Mailbox 27 Data Word 1 [31:16] Register      */
+#define CAN_MB27_DATA2		0xFFC02F68	/* Mailbox 27 Data Word 2 [47:32] Register      */
+#define CAN_MB27_DATA3		0xFFC02F6C	/* Mailbox 27 Data Word 3 [63:48] Register      */
+#define CAN_MB27_LENGTH		0xFFC02F70	/* Mailbox 27 Data Length Code Register         */
+#define CAN_MB27_TIMESTAMP	0xFFC02F74	/* Mailbox 27 Time Stamp Value Register         */
+#define CAN_MB27_ID0		0xFFC02F78	/* Mailbox 27 Identifier Low Register           */
+#define CAN_MB27_ID1		0xFFC02F7C	/* Mailbox 27 Identifier High Register          */
+
+#define CAN_MB28_DATA0		0xFFC02F80	/* Mailbox 28 Data Word 0 [15:0] Register       */
+#define CAN_MB28_DATA1		0xFFC02F84	/* Mailbox 28 Data Word 1 [31:16] Register      */
+#define CAN_MB28_DATA2		0xFFC02F88	/* Mailbox 28 Data Word 2 [47:32] Register      */
+#define CAN_MB28_DATA3		0xFFC02F8C	/* Mailbox 28 Data Word 3 [63:48] Register      */
+#define CAN_MB28_LENGTH		0xFFC02F90	/* Mailbox 28 Data Length Code Register         */
+#define CAN_MB28_TIMESTAMP	0xFFC02F94	/* Mailbox 28 Time Stamp Value Register         */
+#define CAN_MB28_ID0		0xFFC02F98	/* Mailbox 28 Identifier Low Register           */
+#define CAN_MB28_ID1		0xFFC02F9C	/* Mailbox 28 Identifier High Register          */
+
+#define CAN_MB29_DATA0		0xFFC02FA0	/* Mailbox 29 Data Word 0 [15:0] Register       */
+#define CAN_MB29_DATA1		0xFFC02FA4	/* Mailbox 29 Data Word 1 [31:16] Register      */
+#define CAN_MB29_DATA2		0xFFC02FA8	/* Mailbox 29 Data Word 2 [47:32] Register      */
+#define CAN_MB29_DATA3		0xFFC02FAC	/* Mailbox 29 Data Word 3 [63:48] Register      */
+#define CAN_MB29_LENGTH		0xFFC02FB0	/* Mailbox 29 Data Length Code Register         */
+#define CAN_MB29_TIMESTAMP	0xFFC02FB4	/* Mailbox 29 Time Stamp Value Register         */
+#define CAN_MB29_ID0		0xFFC02FB8	/* Mailbox 29 Identifier Low Register           */
+#define CAN_MB29_ID1		0xFFC02FBC	/* Mailbox 29 Identifier High Register          */
+
+#define CAN_MB30_DATA0		0xFFC02FC0	/* Mailbox 30 Data Word 0 [15:0] Register       */
+#define CAN_MB30_DATA1		0xFFC02FC4	/* Mailbox 30 Data Word 1 [31:16] Register      */
+#define CAN_MB30_DATA2		0xFFC02FC8	/* Mailbox 30 Data Word 2 [47:32] Register      */
+#define CAN_MB30_DATA3		0xFFC02FCC	/* Mailbox 30 Data Word 3 [63:48] Register      */
+#define CAN_MB30_LENGTH		0xFFC02FD0	/* Mailbox 30 Data Length Code Register         */
+#define CAN_MB30_TIMESTAMP	0xFFC02FD4	/* Mailbox 30 Time Stamp Value Register         */
+#define CAN_MB30_ID0		0xFFC02FD8	/* Mailbox 30 Identifier Low Register           */
+#define CAN_MB30_ID1		0xFFC02FDC	/* Mailbox 30 Identifier High Register          */
+
+#define CAN_MB31_DATA0		0xFFC02FE0	/* Mailbox 31 Data Word 0 [15:0] Register       */
+#define CAN_MB31_DATA1		0xFFC02FE4	/* Mailbox 31 Data Word 1 [31:16] Register      */
+#define CAN_MB31_DATA2		0xFFC02FE8	/* Mailbox 31 Data Word 2 [47:32] Register      */
+#define CAN_MB31_DATA3		0xFFC02FEC	/* Mailbox 31 Data Word 3 [63:48] Register      */
+#define CAN_MB31_LENGTH		0xFFC02FF0	/* Mailbox 31 Data Length Code Register         */
+#define CAN_MB31_TIMESTAMP	0xFFC02FF4	/* Mailbox 31 Time Stamp Value Register         */
+#define CAN_MB31_ID0		0xFFC02FF8	/* Mailbox 31 Identifier Low Register           */
+#define CAN_MB31_ID1		0xFFC02FFC	/* Mailbox 31 Identifier High Register          */
+
+/* CAN Mailbox Area Macros				*/
+#define CAN_MB_ID1(x)		(CAN_MB00_ID1+((x)*0x20))
+#define CAN_MB_ID0(x)		(CAN_MB00_ID0+((x)*0x20))
+#define CAN_MB_TIMESTAMP(x)	(CAN_MB00_TIMESTAMP+((x)*0x20))
+#define CAN_MB_LENGTH(x)	(CAN_MB00_LENGTH+((x)*0x20))
+#define CAN_MB_DATA3(x)		(CAN_MB00_DATA3+((x)*0x20))
+#define CAN_MB_DATA2(x)		(CAN_MB00_DATA2+((x)*0x20))
+#define CAN_MB_DATA1(x)		(CAN_MB00_DATA1+((x)*0x20))
+#define CAN_MB_DATA0(x)		(CAN_MB00_DATA0+((x)*0x20))
+
+/* Pin Control Registers	(0xFFC03200 - 0xFFC032FF)											*/
+#define PORTF_FER			0xFFC03200	/* Port F Function Enable Register (Alternate/Flag*)    */
+#define PORTG_FER			0xFFC03204	/* Port G Function Enable Register (Alternate/Flag*)    */
+#define PORTH_FER			0xFFC03208	/* Port H Function Enable Register (Alternate/Flag*)    */
+#define BFIN_PORT_MUX			0xFFC0320C	/* Port Multiplexer Control Register                                    */
+
+/* Handshake MDMA Registers	(0xFFC03300 - 0xFFC033FF)										*/
+#define HMDMA0_CONTROL		0xFFC03300	/* Handshake MDMA0 Control Register                                     */
+#define HMDMA0_ECINIT		0xFFC03304	/* HMDMA0 Initial Edge Count Register                           */
+#define HMDMA0_BCINIT		0xFFC03308	/* HMDMA0 Initial Block Count Register                          */
+#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshold Register         */
+#define HMDMA0_ECOVERFLOW	0xFFC03310	/* HMDMA0 Edge Count Overflow Interrupt Register        */
+#define HMDMA0_ECOUNT		0xFFC03314	/* HMDMA0 Current Edge Count Register                           */
+#define HMDMA0_BCOUNT		0xFFC03318	/* HMDMA0 Current Block Count Register                          */
+
+#define HMDMA1_CONTROL		0xFFC03340	/* Handshake MDMA1 Control Register                                     */
+#define HMDMA1_ECINIT		0xFFC03344	/* HMDMA1 Initial Edge Count Register                           */
+#define HMDMA1_BCINIT		0xFFC03348	/* HMDMA1 Initial Block Count Register                          */
+#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshold Register         */
+#define HMDMA1_ECOVERFLOW	0xFFC03350	/* HMDMA1 Edge Count Overflow Interrupt Register        */
+#define HMDMA1_ECOUNT		0xFFC03354	/* HMDMA1 Current Edge Count Register                           */
+#define HMDMA1_BCOUNT		0xFFC03358	/* HMDMA1 Current Block Count Register                          */
+
+/***********************************************************************************
+** System MMR Register Bits And Macros
+**
+** Disclaimer:	All macros are intended to make C and Assembly code more readable.
+**				Use these macros carefully, as any that do left shifts for field
+**				depositing will result in the lower order bits being destroyed.  Any
+**				macro that shifts left to properly position the bit-field should be
+**				used as part of an OR to initialize a register and NOT as a dynamic
+**				modifier UNLESS the lower order bits are saved and ORed back in when
+**				the macro is used.
+*************************************************************************************/
+
+/* CHIPID Masks */
+#define CHIPID_VERSION         0xF0000000
+#define CHIPID_FAMILY          0x0FFFF000
+#define CHIPID_MANUFACTURE     0x00000FFE
+
+/* SWRST Masks																		*/
+#define SYSTEM_RESET		0x0007	/* Initiates A System Software Reset                    */
+#define	DOUBLE_FAULT		0x0008	/* Core Double Fault Causes Reset                               */
+#define RESET_DOUBLE		0x2000	/* SW Reset Generated By Core Double-Fault              */
+#define RESET_WDOG			0x4000	/* SW Reset Generated By Watchdog Timer                 */
+#define RESET_SOFTWARE		0x8000	/* SW Reset Occurred Since Last Read Of SWRST   */
+
+/* SYSCR Masks																				*/
+#define BMODE				0x0007	/* Boot Mode - Latched During HW Reset From Mode Pins   */
+#define	NOBOOT				0x0010	/* Execute From L1 or ASYNC Bank 0 When BMODE = 0               */
+
+/* *************  SYSTEM INTERRUPT CONTROLLER MASKS *************************************/
+
+/* SIC_IAR0 Macros															*/
+#define P0_IVG(x)		(((x)&0xF)-7)	/* Peripheral #0 assigned IVG #x        */
+#define P1_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #1 assigned IVG #x        */
+#define P2_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #2 assigned IVG #x        */
+#define P3_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #3 assigned IVG #x        */
+#define P4_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #4 assigned IVG #x        */
+#define P5_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #5 assigned IVG #x        */
+#define P6_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #6 assigned IVG #x        */
+#define P7_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #7 assigned IVG #x        */
+
+/* SIC_IAR1 Macros															*/
+#define P8_IVG(x)		(((x)&0xF)-7)	/* Peripheral #8 assigned IVG #x        */
+#define P9_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #9 assigned IVG #x        */
+#define P10_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #10 assigned IVG #x       */
+#define P11_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #11 assigned IVG #x       */
+#define P12_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #12 assigned IVG #x       */
+#define P13_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #13 assigned IVG #x       */
+#define P14_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #14 assigned IVG #x       */
+#define P15_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #15 assigned IVG #x       */
+
+/* SIC_IAR2 Macros															*/
+#define P16_IVG(x)		(((x)&0xF)-7)	/* Peripheral #16 assigned IVG #x       */
+#define P17_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #17 assigned IVG #x       */
+#define P18_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #18 assigned IVG #x       */
+#define P19_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #19 assigned IVG #x       */
+#define P20_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #20 assigned IVG #x       */
+#define P21_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #21 assigned IVG #x       */
+#define P22_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #22 assigned IVG #x       */
+#define P23_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #23 assigned IVG #x       */
+
+/* SIC_IAR3 Macros															*/
+#define P24_IVG(x)		(((x)&0xF)-7)	/* Peripheral #24 assigned IVG #x       */
+#define P25_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #25 assigned IVG #x       */
+#define P26_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #26 assigned IVG #x       */
+#define P27_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #27 assigned IVG #x       */
+#define P28_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #28 assigned IVG #x       */
+#define P29_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #29 assigned IVG #x       */
+#define P30_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #30 assigned IVG #x       */
+#define P31_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #31 assigned IVG #x       */
+
+/* SIC_IMASK Masks																		*/
+#define SIC_UNMASK_ALL	0x00000000	/* Unmask all peripheral interrupts     */
+#define SIC_MASK_ALL	0xFFFFFFFF	/* Mask all peripheral interrupts       */
+#define SIC_MASK(x)		(1 << ((x)&0x1F))	/* Mask Peripheral #x interrupt         */
+#define SIC_UNMASK(x)	(0xFFFFFFFF ^ (1 << ((x)&0x1F)))	/* Unmask Peripheral #x interrupt       */
+
+/* SIC_IWR Masks																		*/
+#define IWR_DISABLE_ALL	0x00000000	/* Wakeup Disable all peripherals       */
+#define IWR_ENABLE_ALL	0xFFFFFFFF	/* Wakeup Enable all peripherals        */
+#define IWR_ENABLE(x)	(1 << ((x)&0x1F))	/* Wakeup Enable Peripheral #x          */
+#define IWR_DISABLE(x)	(0xFFFFFFFF ^ (1 << ((x)&0x1F)))	/* Wakeup Disable Peripheral #x         */
+
+/*  ****************  GENERAL PURPOSE TIMER MASKS  **********************/
+/* TIMER_ENABLE Masks													*/
+#define TIMEN0			0x0001	/* Enable Timer 0                                       */
+#define TIMEN1			0x0002	/* Enable Timer 1                                       */
+#define TIMEN2			0x0004	/* Enable Timer 2                                       */
+#define TIMEN3			0x0008	/* Enable Timer 3                                       */
+#define TIMEN4			0x0010	/* Enable Timer 4                                       */
+#define TIMEN5			0x0020	/* Enable Timer 5                                       */
+#define TIMEN6			0x0040	/* Enable Timer 6                                       */
+#define TIMEN7			0x0080	/* Enable Timer 7                                       */
+
+/* TIMER_DISABLE Masks													*/
+#define TIMDIS0			TIMEN0	/* Disable Timer 0                                      */
+#define TIMDIS1			TIMEN1	/* Disable Timer 1                                      */
+#define TIMDIS2			TIMEN2	/* Disable Timer 2                                      */
+#define TIMDIS3			TIMEN3	/* Disable Timer 3                                      */
+#define TIMDIS4			TIMEN4	/* Disable Timer 4                                      */
+#define TIMDIS5			TIMEN5	/* Disable Timer 5                                      */
+#define TIMDIS6			TIMEN6	/* Disable Timer 6                                      */
+#define TIMDIS7			TIMEN7	/* Disable Timer 7                                      */
+
+/* TIMER_STATUS Masks													*/
+#define TIMIL0			0x00000001	/* Timer 0 Interrupt                            */
+#define TIMIL1			0x00000002	/* Timer 1 Interrupt                            */
+#define TIMIL2			0x00000004	/* Timer 2 Interrupt                            */
+#define TIMIL3			0x00000008	/* Timer 3 Interrupt                            */
+#define TOVF_ERR0		0x00000010	/* Timer 0 Counter Overflow			*/
+#define TOVF_ERR1		0x00000020	/* Timer 1 Counter Overflow			*/
+#define TOVF_ERR2		0x00000040	/* Timer 2 Counter Overflow			*/
+#define TOVF_ERR3		0x00000080	/* Timer 3 Counter Overflow			*/
+#define TRUN0			0x00001000	/* Timer 0 Slave Enable Status          */
+#define TRUN1			0x00002000	/* Timer 1 Slave Enable Status          */
+#define TRUN2			0x00004000	/* Timer 2 Slave Enable Status          */
+#define TRUN3			0x00008000	/* Timer 3 Slave Enable Status          */
+#define TIMIL4			0x00010000	/* Timer 4 Interrupt                            */
+#define TIMIL5			0x00020000	/* Timer 5 Interrupt                            */
+#define TIMIL6			0x00040000	/* Timer 6 Interrupt                            */
+#define TIMIL7			0x00080000	/* Timer 7 Interrupt                            */
+#define TOVF_ERR4		0x00100000	/* Timer 4 Counter Overflow			*/
+#define TOVF_ERR5		0x00200000	/* Timer 5 Counter Overflow			*/
+#define TOVF_ERR6		0x00400000	/* Timer 6 Counter Overflow			*/
+#define TOVF_ERR7		0x00800000	/* Timer 7 Counter Overflow			*/
+#define TRUN4			0x10000000	/* Timer 4 Slave Enable Status          */
+#define TRUN5			0x20000000	/* Timer 5 Slave Enable Status          */
+#define TRUN6			0x40000000	/* Timer 6 Slave Enable Status          */
+#define TRUN7			0x80000000	/* Timer 7 Slave Enable Status          */
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define TOVL_ERR0 TOVF_ERR0
+#define TOVL_ERR1 TOVF_ERR1
+#define TOVL_ERR2 TOVF_ERR2
+#define TOVL_ERR3 TOVF_ERR3
+#define TOVL_ERR4 TOVF_ERR4
+#define TOVL_ERR5 TOVF_ERR5
+#define TOVL_ERR6 TOVF_ERR6
+#define TOVL_ERR7 TOVF_ERR7
+/* TIMERx_CONFIG Masks													*/
+#define PWM_OUT			0x0001	/* Pulse-Width Modulation Output Mode   */
+#define WDTH_CAP		0x0002	/* Width Capture Input Mode                             */
+#define EXT_CLK			0x0003	/* External Clock Mode                                  */
+#define PULSE_HI		0x0004	/* Action Pulse (Positive/Negative*)    */
+#define PERIOD_CNT		0x0008	/* Period Count                                                 */
+#define IRQ_ENA			0x0010	/* Interrupt Request Enable                             */
+#define TIN_SEL			0x0020	/* Timer Input Select                                   */
+#define OUT_DIS			0x0040	/* Output Pad Disable                                   */
+#define CLK_SEL			0x0080	/* Timer Clock Select                                   */
+#define TOGGLE_HI		0x0100	/* PWM_OUT PULSE_HI Toggle Mode                 */
+#define EMU_RUN			0x0200	/* Emulation Behavior Select                    */
+#define ERR_TYP			0xC000	/* Error Type                                                   */
+
+/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  *************************/
+/* EBIU_AMGCTL Masks																	*/
+#define AMCKEN			0x0001	/* Enable CLKOUT                                                                        */
+#define	AMBEN_NONE		0x0000	/* All Banks Disabled                                                           */
+#define AMBEN_B0		0x0002	/* Enable Async Memory Bank 0 only                                      */
+#define AMBEN_B0_B1		0x0004	/* Enable Async Memory Banks 0 & 1 only                         */
+#define AMBEN_B0_B1_B2	0x0006	/* Enable Async Memory Banks 0, 1, and 2                        */
+#define AMBEN_ALL		0x0008	/* Enable Async Memory Banks (all) 0, 1, 2, and 3       */
+
+/* EBIU_AMBCTL0 Masks																	*/
+#define B0RDYEN			0x00000001	/* Bank 0 (B0) RDY Enable                                                   */
+#define B0RDYPOL		0x00000002	/* B0 RDY Active High                                                               */
+#define B0TT_1			0x00000004	/* B0 Transition Time (Read to Write) = 1 cycle             */
+#define B0TT_2			0x00000008	/* B0 Transition Time (Read to Write) = 2 cycles    */
+#define B0TT_3			0x0000000C	/* B0 Transition Time (Read to Write) = 3 cycles    */
+#define B0TT_4			0x00000000	/* B0 Transition Time (Read to Write) = 4 cycles    */
+#define B0ST_1			0x00000010	/* B0 Setup Time (AOE to Read/Write) = 1 cycle              */
+#define B0ST_2			0x00000020	/* B0 Setup Time (AOE to Read/Write) = 2 cycles             */
+#define B0ST_3			0x00000030	/* B0 Setup Time (AOE to Read/Write) = 3 cycles             */
+#define B0ST_4			0x00000000	/* B0 Setup Time (AOE to Read/Write) = 4 cycles             */
+#define B0HT_1			0x00000040	/* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle             */
+#define B0HT_2			0x00000080	/* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles    */
+#define B0HT_3			0x000000C0	/* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles    */
+#define B0HT_0			0x00000000	/* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles    */
+#define B0RAT_1			0x00000100	/* B0 Read Access Time = 1 cycle                                    */
+#define B0RAT_2			0x00000200	/* B0 Read Access Time = 2 cycles                                   */
+#define B0RAT_3			0x00000300	/* B0 Read Access Time = 3 cycles                                   */
+#define B0RAT_4			0x00000400	/* B0 Read Access Time = 4 cycles                                   */
+#define B0RAT_5			0x00000500	/* B0 Read Access Time = 5 cycles                                   */
+#define B0RAT_6			0x00000600	/* B0 Read Access Time = 6 cycles                                   */
+#define B0RAT_7			0x00000700	/* B0 Read Access Time = 7 cycles                                   */
+#define B0RAT_8			0x00000800	/* B0 Read Access Time = 8 cycles                                   */
+#define B0RAT_9			0x00000900	/* B0 Read Access Time = 9 cycles                                   */
+#define B0RAT_10		0x00000A00	/* B0 Read Access Time = 10 cycles                                  */
+#define B0RAT_11		0x00000B00	/* B0 Read Access Time = 11 cycles                                  */
+#define B0RAT_12		0x00000C00	/* B0 Read Access Time = 12 cycles                                  */
+#define B0RAT_13		0x00000D00	/* B0 Read Access Time = 13 cycles                                  */
+#define B0RAT_14		0x00000E00	/* B0 Read Access Time = 14 cycles                                  */
+#define B0RAT_15		0x00000F00	/* B0 Read Access Time = 15 cycles                                  */
+#define B0WAT_1			0x00001000	/* B0 Write Access Time = 1 cycle                                   */
+#define B0WAT_2			0x00002000	/* B0 Write Access Time = 2 cycles                                  */
+#define B0WAT_3			0x00003000	/* B0 Write Access Time = 3 cycles                                  */
+#define B0WAT_4			0x00004000	/* B0 Write Access Time = 4 cycles                                  */
+#define B0WAT_5			0x00005000	/* B0 Write Access Time = 5 cycles                                  */
+#define B0WAT_6			0x00006000	/* B0 Write Access Time = 6 cycles                                  */
+#define B0WAT_7			0x00007000	/* B0 Write Access Time = 7 cycles                                  */
+#define B0WAT_8			0x00008000	/* B0 Write Access Time = 8 cycles                                  */
+#define B0WAT_9			0x00009000	/* B0 Write Access Time = 9 cycles                                  */
+#define B0WAT_10		0x0000A000	/* B0 Write Access Time = 10 cycles                                 */
+#define B0WAT_11		0x0000B000	/* B0 Write Access Time = 11 cycles                                 */
+#define B0WAT_12		0x0000C000	/* B0 Write Access Time = 12 cycles                                 */
+#define B0WAT_13		0x0000D000	/* B0 Write Access Time = 13 cycles                                 */
+#define B0WAT_14		0x0000E000	/* B0 Write Access Time = 14 cycles                                 */
+#define B0WAT_15		0x0000F000	/* B0 Write Access Time = 15 cycles                                 */
+
+#define B1RDYEN			0x00010000	/* Bank 1 (B1) RDY Enable                           */
+#define B1RDYPOL		0x00020000	/* B1 RDY Active High                               */
+#define B1TT_1			0x00040000	/* B1 Transition Time (Read to Write) = 1 cycle     */
+#define B1TT_2			0x00080000	/* B1 Transition Time (Read to Write) = 2 cycles    */
+#define B1TT_3			0x000C0000	/* B1 Transition Time (Read to Write) = 3 cycles    */
+#define B1TT_4			0x00000000	/* B1 Transition Time (Read to Write) = 4 cycles    */
+#define B1ST_1			0x00100000	/* B1 Setup Time (AOE to Read/Write) = 1 cycle      */
+#define B1ST_2			0x00200000	/* B1 Setup Time (AOE to Read/Write) = 2 cycles     */
+#define B1ST_3			0x00300000	/* B1 Setup Time (AOE to Read/Write) = 3 cycles     */
+#define B1ST_4			0x00000000	/* B1 Setup Time (AOE to Read/Write) = 4 cycles     */
+#define B1HT_1			0x00400000	/* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle     */
+#define B1HT_2			0x00800000	/* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles    */
+#define B1HT_3			0x00C00000	/* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles    */
+#define B1HT_0			0x00000000	/* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles    */
+#define B1RAT_1			0x01000000	/* B1 Read Access Time = 1 cycle                                    */
+#define B1RAT_2			0x02000000	/* B1 Read Access Time = 2 cycles                                   */
+#define B1RAT_3			0x03000000	/* B1 Read Access Time = 3 cycles                                   */
+#define B1RAT_4			0x04000000	/* B1 Read Access Time = 4 cycles                                   */
+#define B1RAT_5			0x05000000	/* B1 Read Access Time = 5 cycles                                   */
+#define B1RAT_6			0x06000000	/* B1 Read Access Time = 6 cycles                                   */
+#define B1RAT_7			0x07000000	/* B1 Read Access Time = 7 cycles                                   */
+#define B1RAT_8			0x08000000	/* B1 Read Access Time = 8 cycles                                   */
+#define B1RAT_9			0x09000000	/* B1 Read Access Time = 9 cycles                                   */
+#define B1RAT_10		0x0A000000	/* B1 Read Access Time = 10 cycles                                  */
+#define B1RAT_11		0x0B000000	/* B1 Read Access Time = 11 cycles                                  */
+#define B1RAT_12		0x0C000000	/* B1 Read Access Time = 12 cycles                                  */
+#define B1RAT_13		0x0D000000	/* B1 Read Access Time = 13 cycles                                  */
+#define B1RAT_14		0x0E000000	/* B1 Read Access Time = 14 cycles                                  */
+#define B1RAT_15		0x0F000000	/* B1 Read Access Time = 15 cycles                                  */
+#define B1WAT_1			0x10000000	/* B1 Write Access Time = 1 cycle                                   */
+#define B1WAT_2			0x20000000	/* B1 Write Access Time = 2 cycles                                  */
+#define B1WAT_3			0x30000000	/* B1 Write Access Time = 3 cycles                                  */
+#define B1WAT_4			0x40000000	/* B1 Write Access Time = 4 cycles                                  */
+#define B1WAT_5			0x50000000	/* B1 Write Access Time = 5 cycles                                  */
+#define B1WAT_6			0x60000000	/* B1 Write Access Time = 6 cycles                                  */
+#define B1WAT_7			0x70000000	/* B1 Write Access Time = 7 cycles                                  */
+#define B1WAT_8			0x80000000	/* B1 Write Access Time = 8 cycles                                  */
+#define B1WAT_9			0x90000000	/* B1 Write Access Time = 9 cycles                                  */
+#define B1WAT_10		0xA0000000	/* B1 Write Access Time = 10 cycles                                 */
+#define B1WAT_11		0xB0000000	/* B1 Write Access Time = 11 cycles                                 */
+#define B1WAT_12		0xC0000000	/* B1 Write Access Time = 12 cycles                                 */
+#define B1WAT_13		0xD0000000	/* B1 Write Access Time = 13 cycles                                 */
+#define B1WAT_14		0xE0000000	/* B1 Write Access Time = 14 cycles                                 */
+#define B1WAT_15		0xF0000000	/* B1 Write Access Time = 15 cycles                                 */
+
+/* EBIU_AMBCTL1 Masks																	*/
+#define B2RDYEN			0x00000001	/* Bank 2 (B2) RDY Enable                                                   */
+#define B2RDYPOL		0x00000002	/* B2 RDY Active High                                                               */
+#define B2TT_1			0x00000004	/* B2 Transition Time (Read to Write) = 1 cycle             */
+#define B2TT_2			0x00000008	/* B2 Transition Time (Read to Write) = 2 cycles    */
+#define B2TT_3			0x0000000C	/* B2 Transition Time (Read to Write) = 3 cycles    */
+#define B2TT_4			0x00000000	/* B2 Transition Time (Read to Write) = 4 cycles    */
+#define B2ST_1			0x00000010	/* B2 Setup Time (AOE to Read/Write) = 1 cycle              */
+#define B2ST_2			0x00000020	/* B2 Setup Time (AOE to Read/Write) = 2 cycles             */
+#define B2ST_3			0x00000030	/* B2 Setup Time (AOE to Read/Write) = 3 cycles             */
+#define B2ST_4			0x00000000	/* B2 Setup Time (AOE to Read/Write) = 4 cycles             */
+#define B2HT_1			0x00000040	/* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle             */
+#define B2HT_2			0x00000080	/* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles    */
+#define B2HT_3			0x000000C0	/* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles    */
+#define B2HT_0			0x00000000	/* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles    */
+#define B2RAT_1			0x00000100	/* B2 Read Access Time = 1 cycle                                    */
+#define B2RAT_2			0x00000200	/* B2 Read Access Time = 2 cycles                                   */
+#define B2RAT_3			0x00000300	/* B2 Read Access Time = 3 cycles                                   */
+#define B2RAT_4			0x00000400	/* B2 Read Access Time = 4 cycles                                   */
+#define B2RAT_5			0x00000500	/* B2 Read Access Time = 5 cycles                                   */
+#define B2RAT_6			0x00000600	/* B2 Read Access Time = 6 cycles                                   */
+#define B2RAT_7			0x00000700	/* B2 Read Access Time = 7 cycles                                   */
+#define B2RAT_8			0x00000800	/* B2 Read Access Time = 8 cycles                                   */
+#define B2RAT_9			0x00000900	/* B2 Read Access Time = 9 cycles                                   */
+#define B2RAT_10		0x00000A00	/* B2 Read Access Time = 10 cycles                                  */
+#define B2RAT_11		0x00000B00	/* B2 Read Access Time = 11 cycles                                  */
+#define B2RAT_12		0x00000C00	/* B2 Read Access Time = 12 cycles                                  */
+#define B2RAT_13		0x00000D00	/* B2 Read Access Time = 13 cycles                                  */
+#define B2RAT_14		0x00000E00	/* B2 Read Access Time = 14 cycles                                  */
+#define B2RAT_15		0x00000F00	/* B2 Read Access Time = 15 cycles                                  */
+#define B2WAT_1			0x00001000	/* B2 Write Access Time = 1 cycle                                   */
+#define B2WAT_2			0x00002000	/* B2 Write Access Time = 2 cycles                                  */
+#define B2WAT_3			0x00003000	/* B2 Write Access Time = 3 cycles                                  */
+#define B2WAT_4			0x00004000	/* B2 Write Access Time = 4 cycles                                  */
+#define B2WAT_5			0x00005000	/* B2 Write Access Time = 5 cycles                                  */
+#define B2WAT_6			0x00006000	/* B2 Write Access Time = 6 cycles                                  */
+#define B2WAT_7			0x00007000	/* B2 Write Access Time = 7 cycles                                  */
+#define B2WAT_8			0x00008000	/* B2 Write Access Time = 8 cycles                                  */
+#define B2WAT_9			0x00009000	/* B2 Write Access Time = 9 cycles                                  */
+#define B2WAT_10		0x0000A000	/* B2 Write Access Time = 10 cycles                                 */
+#define B2WAT_11		0x0000B000	/* B2 Write Access Time = 11 cycles                                 */
+#define B2WAT_12		0x0000C000	/* B2 Write Access Time = 12 cycles                                 */
+#define B2WAT_13		0x0000D000	/* B2 Write Access Time = 13 cycles                                 */
+#define B2WAT_14		0x0000E000	/* B2 Write Access Time = 14 cycles                                 */
+#define B2WAT_15		0x0000F000	/* B2 Write Access Time = 15 cycles                                 */
+
+#define B3RDYEN			0x00010000	/* Bank 3 (B3) RDY Enable                                                   */
+#define B3RDYPOL		0x00020000	/* B3 RDY Active High                                                               */
+#define B3TT_1			0x00040000	/* B3 Transition Time (Read to Write) = 1 cycle             */
+#define B3TT_2			0x00080000	/* B3 Transition Time (Read to Write) = 2 cycles    */
+#define B3TT_3			0x000C0000	/* B3 Transition Time (Read to Write) = 3 cycles    */
+#define B3TT_4			0x00000000	/* B3 Transition Time (Read to Write) = 4 cycles    */
+#define B3ST_1			0x00100000	/* B3 Setup Time (AOE to Read/Write) = 1 cycle              */
+#define B3ST_2			0x00200000	/* B3 Setup Time (AOE to Read/Write) = 2 cycles             */
+#define B3ST_3			0x00300000	/* B3 Setup Time (AOE to Read/Write) = 3 cycles             */
+#define B3ST_4			0x00000000	/* B3 Setup Time (AOE to Read/Write) = 4 cycles             */
+#define B3HT_1			0x00400000	/* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle             */
+#define B3HT_2			0x00800000	/* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles    */
+#define B3HT_3			0x00C00000	/* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles    */
+#define B3HT_0			0x00000000	/* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles    */
+#define B3RAT_1			0x01000000	/* B3 Read Access Time = 1 cycle                                    */
+#define B3RAT_2			0x02000000	/* B3 Read Access Time = 2 cycles                                   */
+#define B3RAT_3			0x03000000	/* B3 Read Access Time = 3 cycles                                   */
+#define B3RAT_4			0x04000000	/* B3 Read Access Time = 4 cycles                                   */
+#define B3RAT_5			0x05000000	/* B3 Read Access Time = 5 cycles                                   */
+#define B3RAT_6			0x06000000	/* B3 Read Access Time = 6 cycles                                   */
+#define B3RAT_7			0x07000000	/* B3 Read Access Time = 7 cycles                                   */
+#define B3RAT_8			0x08000000	/* B3 Read Access Time = 8 cycles                                   */
+#define B3RAT_9			0x09000000	/* B3 Read Access Time = 9 cycles                                   */
+#define B3RAT_10		0x0A000000	/* B3 Read Access Time = 10 cycles                                  */
+#define B3RAT_11		0x0B000000	/* B3 Read Access Time = 11 cycles                                  */
+#define B3RAT_12		0x0C000000	/* B3 Read Access Time = 12 cycles                                  */
+#define B3RAT_13		0x0D000000	/* B3 Read Access Time = 13 cycles                                  */
+#define B3RAT_14		0x0E000000	/* B3 Read Access Time = 14 cycles                                  */
+#define B3RAT_15		0x0F000000	/* B3 Read Access Time = 15 cycles                                  */
+#define B3WAT_1			0x10000000	/* B3 Write Access Time = 1 cycle                                   */
+#define B3WAT_2			0x20000000	/* B3 Write Access Time = 2 cycles                                  */
+#define B3WAT_3			0x30000000	/* B3 Write Access Time = 3 cycles                                  */
+#define B3WAT_4			0x40000000	/* B3 Write Access Time = 4 cycles                                  */
+#define B3WAT_5			0x50000000	/* B3 Write Access Time = 5 cycles                                  */
+#define B3WAT_6			0x60000000	/* B3 Write Access Time = 6 cycles                                  */
+#define B3WAT_7			0x70000000	/* B3 Write Access Time = 7 cycles                                  */
+#define B3WAT_8			0x80000000	/* B3 Write Access Time = 8 cycles                                  */
+#define B3WAT_9			0x90000000	/* B3 Write Access Time = 9 cycles                                  */
+#define B3WAT_10		0xA0000000	/* B3 Write Access Time = 10 cycles                                 */
+#define B3WAT_11		0xB0000000	/* B3 Write Access Time = 11 cycles                                 */
+#define B3WAT_12		0xC0000000	/* B3 Write Access Time = 12 cycles                                 */
+#define B3WAT_13		0xD0000000	/* B3 Write Access Time = 13 cycles                                 */
+#define B3WAT_14		0xE0000000	/* B3 Write Access Time = 14 cycles                                 */
+#define B3WAT_15		0xF0000000	/* B3 Write Access Time = 15 cycles                                 */
+
+/* **********************  SDRAM CONTROLLER MASKS  **********************************************/
+/* EBIU_SDGCTL Masks																			*/
+#define SCTLE			0x00000001	/* Enable SDRAM Signals                                                                         */
+#define CL_2			0x00000008	/* SDRAM CAS Latency = 2 cycles                                                         */
+#define CL_3			0x0000000C	/* SDRAM CAS Latency = 3 cycles                                                         */
+#define PASR_ALL		0x00000000	/* All 4 SDRAM Banks Refreshed In Self-Refresh                          */
+#define PASR_B0_B1		0x00000010	/* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh            */
+#define PASR_B0			0x00000020	/* Only SDRAM Bank 0 Is Refreshed In Self-Refresh                       */
+#define TRAS_1			0x00000040	/* SDRAM tRAS = 1 cycle                                                                         */
+#define TRAS_2			0x00000080	/* SDRAM tRAS = 2 cycles                                                                        */
+#define TRAS_3			0x000000C0	/* SDRAM tRAS = 3 cycles                                                                        */
+#define TRAS_4			0x00000100	/* SDRAM tRAS = 4 cycles                                                                        */
+#define TRAS_5			0x00000140	/* SDRAM tRAS = 5 cycles                                                                        */
+#define TRAS_6			0x00000180	/* SDRAM tRAS = 6 cycles                                                                        */
+#define TRAS_7			0x000001C0	/* SDRAM tRAS = 7 cycles                                                                        */
+#define TRAS_8			0x00000200	/* SDRAM tRAS = 8 cycles                                                                        */
+#define TRAS_9			0x00000240	/* SDRAM tRAS = 9 cycles                                                                        */
+#define TRAS_10			0x00000280	/* SDRAM tRAS = 10 cycles                                                                       */
+#define TRAS_11			0x000002C0	/* SDRAM tRAS = 11 cycles                                                                       */
+#define TRAS_12			0x00000300	/* SDRAM tRAS = 12 cycles                                                                       */
+#define TRAS_13			0x00000340	/* SDRAM tRAS = 13 cycles                                                                       */
+#define TRAS_14			0x00000380	/* SDRAM tRAS = 14 cycles                                                                       */
+#define TRAS_15			0x000003C0	/* SDRAM tRAS = 15 cycles                                                                       */
+#define TRP_1			0x00000800	/* SDRAM tRP = 1 cycle                                                                          */
+#define TRP_2			0x00001000	/* SDRAM tRP = 2 cycles                                                                         */
+#define TRP_3			0x00001800	/* SDRAM tRP = 3 cycles                                                                         */
+#define TRP_4			0x00002000	/* SDRAM tRP = 4 cycles                                                                         */
+#define TRP_5			0x00002800	/* SDRAM tRP = 5 cycles                                                                         */
+#define TRP_6			0x00003000	/* SDRAM tRP = 6 cycles                                                                         */
+#define TRP_7			0x00003800	/* SDRAM tRP = 7 cycles                                                                         */
+#define TRCD_1			0x00008000	/* SDRAM tRCD = 1 cycle                                                                         */
+#define TRCD_2			0x00010000	/* SDRAM tRCD = 2 cycles                                                                        */
+#define TRCD_3			0x00018000	/* SDRAM tRCD = 3 cycles                                                                        */
+#define TRCD_4			0x00020000	/* SDRAM tRCD = 4 cycles                                                                        */
+#define TRCD_5			0x00028000	/* SDRAM tRCD = 5 cycles                                                                        */
+#define TRCD_6			0x00030000	/* SDRAM tRCD = 6 cycles                                                                        */
+#define TRCD_7			0x00038000	/* SDRAM tRCD = 7 cycles                                                                        */
+#define TWR_1			0x00080000	/* SDRAM tWR = 1 cycle                                                                          */
+#define TWR_2			0x00100000	/* SDRAM tWR = 2 cycles                                                                         */
+#define TWR_3			0x00180000	/* SDRAM tWR = 3 cycles                                                                         */
+#define PUPSD			0x00200000	/* Power-Up Start Delay (15 SCLK Cycles Delay)                          */
+#define PSM				0x00400000	/* Power-Up Sequence (Mode Register Before/After* Refresh)      */
+#define PSS				0x00800000	/* Enable Power-Up Sequence on Next SDRAM Access                        */
+#define SRFS			0x01000000	/* Enable SDRAM Self-Refresh Mode                                                       */
+#define EBUFE			0x02000000	/* Enable External Buffering Timing                                                     */
+#define FBBRW			0x04000000	/* Enable Fast Back-To-Back Read To Write                                       */
+#define EMREN			0x10000000	/* Extended Mode Register Enable                                                        */
+#define TCSR			0x20000000	/* Temp-Compensated Self-Refresh Value (85/45* Deg C)           */
+#define CDDBG			0x40000000	/* Tristate SDRAM Controls During Bus Grant                                     */
+
+/* EBIU_SDBCTL Masks																		*/
+#define EBE				0x0001	/* Enable SDRAM External Bank                                                   */
+#define EBSZ_16			0x0000	/* SDRAM External Bank Size = 16MB                                              */
+#define EBSZ_32			0x0002	/* SDRAM External Bank Size = 32MB                                              */
+#define EBSZ_64			0x0004	/* SDRAM External Bank Size = 64MB                                              */
+#define EBSZ_128		0x0006	/* SDRAM External Bank Size = 128MB                                             */
+#define EBSZ_256		0x0008		/* SDRAM External Bank Size = 256MB 	*/
+#define EBSZ_512		0x000A		/* SDRAM External Bank Size = 512MB		*/
+#define EBCAW_8			0x0000	/* SDRAM External Bank Column Address Width = 8 Bits    */
+#define EBCAW_9			0x0010	/* SDRAM External Bank Column Address Width = 9 Bits    */
+#define EBCAW_10		0x0020	/* SDRAM External Bank Column Address Width = 10 Bits   */
+#define EBCAW_11		0x0030	/* SDRAM External Bank Column Address Width = 11 Bits   */
+
+/* EBIU_SDSTAT Masks														*/
+#define SDCI			0x0001	/* SDRAM Controller Idle                                */
+#define SDSRA			0x0002	/* SDRAM Self-Refresh Active                    */
+#define SDPUA			0x0004	/* SDRAM Power-Up Active                                */
+#define SDRS			0x0008	/* SDRAM Will Power-Up On Next Access   */
+#define SDEASE			0x0010	/* SDRAM EAB Sticky Error Status                */
+#define BGSTAT			0x0020	/* Bus Grant Status                                             */
+
+/* **************************  DMA CONTROLLER MASKS  ********************************/
+
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks								*/
+#define CTYPE			0x0040	/* DMA Channel Type Indicator (Memory/Peripheral*)      */
+#define PMAP			0xF000	/* Peripheral Mapped To This Channel                            */
+#define PMAP_PPI		0x0000	/*              PPI Port DMA                                                            */
+#define	PMAP_EMACRX		0x1000	/*              Ethernet Receive DMA                                            */
+#define PMAP_EMACTX		0x2000	/*              Ethernet Transmit DMA                                           */
+#define PMAP_SPORT0RX	0x3000	/*              SPORT0 Receive DMA                                                      */
+#define PMAP_SPORT0TX	0x4000	/*              SPORT0 Transmit DMA                                                     */
+#define PMAP_SPORT1RX	0x5000	/*              SPORT1 Receive DMA                                                      */
+#define PMAP_SPORT1TX	0x6000	/*              SPORT1 Transmit DMA                                                     */
+#define PMAP_SPI		0x7000	/*              SPI Port DMA                                                            */
+#define PMAP_UART0RX	0x8000	/*              UART0 Port Receive DMA                                          */
+#define PMAP_UART0TX	0x9000	/*              UART0 Port Transmit DMA                                         */
+#define	PMAP_UART1RX	0xA000	/*              UART1 Port Receive DMA                                          */
+#define	PMAP_UART1TX	0xB000	/*              UART1 Port Transmit DMA                                         */
+
+/*  ************  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
+/*  PPI_CONTROL Masks													*/
+#define PORT_EN			0x0001	/* PPI Port Enable                                      */
+#define PORT_DIR		0x0002	/* PPI Port Direction                           */
+#define XFR_TYPE		0x000C	/* PPI Transfer Type                            */
+#define PORT_CFG		0x0030	/* PPI Port Configuration                       */
+#define FLD_SEL			0x0040	/* PPI Active Field Select                      */
+#define PACK_EN			0x0080	/* PPI Packing Mode                                     */
+#define DMA32			0x0100	/* PPI 32-bit DMA Enable                        */
+#define SKIP_EN			0x0200	/* PPI Skip Element Enable                      */
+#define SKIP_EO			0x0400	/* PPI Skip Even/Odd Elements           */
+#define DLENGTH         0x3800	/* PPI Data Length  */
+#define DLEN_8			0x0000	/* Data Length = 8 Bits                         */
+#define DLEN_10			0x0800	/* Data Length = 10 Bits                        */
+#define DLEN_11			0x1000	/* Data Length = 11 Bits                        */
+#define DLEN_12			0x1800	/* Data Length = 12 Bits                        */
+#define DLEN_13			0x2000	/* Data Length = 13 Bits                        */
+#define DLEN_14			0x2800	/* Data Length = 14 Bits                        */
+#define DLEN_15			0x3000	/* Data Length = 15 Bits                        */
+#define DLEN_16			0x3800	/* Data Length = 16 Bits                        */
+#define POLC			0x4000	/* PPI Clock Polarity                           */
+#define POLS			0x8000	/* PPI Frame Sync Polarity                      */
+
+/* PPI_STATUS Masks														*/
+#define FLD				0x0400	/* Field Indicator                                      */
+#define FT_ERR			0x0800	/* Frame Track Error                            */
+#define OVR				0x1000	/* FIFO Overflow Error                          */
+#define UNDR			0x2000	/* FIFO Underrun Error                          */
+#define ERR_DET			0x4000	/* Error Detected Indicator                     */
+#define ERR_NCOR		0x8000	/* Error Not Corrected Indicator        */
+
+
+/*  *******************  PIN CONTROL REGISTER MASKS  ************************/
+/* PORT_MUX Masks															*/
+#define	PJSE			0x0001	/* Port J SPI/SPORT Enable                      */
+#define	PJSE_SPORT		0x0000	/*              Enable TFS0/DT0PRI                      */
+#define	PJSE_SPI		0x0001	/*              Enable SPI_SSEL3:2                      */
+
+#define	PJCE(x)			(((x)&0x3)<<1)	/* Port J CAN/SPI/SPORT Enable          */
+#define	PJCE_SPORT		0x0000	/*              Enable DR0SEC/DT0SEC            */
+#define	PJCE_CAN		0x0002	/*              Enable CAN RX/TX                        */
+#define	PJCE_SPI		0x0004	/*              Enable SPI_SSEL7                        */
+
+#define	PFDE			0x0008	/* Port F DMA Request Enable            */
+#define	PFDE_UART		0x0000	/*              Enable UART0 RX/TX                      */
+#define	PFDE_DMA		0x0008	/*              Enable DMAR1:0                          */
+
+#define	PFTE			0x0010	/* Port F Timer Enable                          */
+#define	PFTE_UART		0x0000	/*              Enable UART1 RX/TX                      */
+#define	PFTE_TIMER		0x0010	/*              Enable TMR7:6                           */
+
+#define	PFS6E			0x0020	/* Port F SPI SSEL 6 Enable                     */
+#define	PFS6E_TIMER		0x0000	/*              Enable TMR5                                     */
+#define	PFS6E_SPI		0x0020	/*              Enable SPI_SSEL6                        */
+
+#define	PFS5E			0x0040	/* Port F SPI SSEL 5 Enable                     */
+#define	PFS5E_TIMER		0x0000	/*              Enable TMR4                                     */
+#define	PFS5E_SPI		0x0040	/*              Enable SPI_SSEL5                        */
+
+#define	PFS4E			0x0080	/* Port F SPI SSEL 4 Enable                     */
+#define	PFS4E_TIMER		0x0000	/*              Enable TMR3                                     */
+#define	PFS4E_SPI		0x0080	/*              Enable SPI_SSEL4                        */
+
+#define	PFFE			0x0100	/* Port F PPI Frame Sync Enable         */
+#define	PFFE_TIMER		0x0000	/*              Enable TMR2                                     */
+#define	PFFE_PPI		0x0100	/*              Enable PPI FS3                          */
+
+#define	PGSE			0x0200	/* Port G SPORT1 Secondary Enable       */
+#define	PGSE_PPI		0x0000	/*              Enable PPI D9:8                         */
+#define	PGSE_SPORT		0x0200	/*              Enable DR1SEC/DT1SEC            */
+
+#define	PGRE			0x0400	/* Port G SPORT1 Receive Enable         */
+#define	PGRE_PPI		0x0000	/*              Enable PPI D12:10                       */
+#define	PGRE_SPORT		0x0400	/*              Enable DR1PRI/RFS1/RSCLK1       */
+
+#define	PGTE			0x0800	/* Port G SPORT1 Transmit Enable        */
+#define	PGTE_PPI		0x0000	/*              Enable PPI D15:13                       */
+#define	PGTE_SPORT		0x0800	/*              Enable DT1PRI/TFS1/TSCLK1       */
+
+/* entry addresses of the user-callable Boot ROM functions */
+
+#define _BOOTROM_RESET 0xEF000000 
+#define _BOOTROM_FINAL_INIT 0xEF000002 
+#define _BOOTROM_DO_MEMORY_DMA 0xEF000006
+#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 
+#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A 
+#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C 
+#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
+#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
+#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define	PGDE_UART   PFDE_UART
+#define	PGDE_DMA    PFDE_DMA
+#define	CKELOW		SCKELOW
+#endif				/* _DEF_BF534_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/defBF537.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/defBF537.h
new file mode 100644
index 0000000..e10332c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/defBF537.h
@@ -0,0 +1,377 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF537_H
+#define _DEF_BF537_H
+
+/* Include all MMR and bit defines common to BF534 */
+#include "defBF534.h"
+
+/************************************************************************************
+** Define EMAC Section Unique to BF536/BF537
+*************************************************************************************/
+
+/* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF)										*/
+#define	EMAC_OPMODE			0xFFC03000	/* Operating Mode Register                                                              */
+#define EMAC_ADDRLO			0xFFC03004	/* Address Low (32 LSBs) Register                                               */
+#define EMAC_ADDRHI			0xFFC03008	/* Address High (16 MSBs) Register                                              */
+#define EMAC_HASHLO			0xFFC0300C	/* Multicast Hash Table Low (Bins 31-0) Register                */
+#define EMAC_HASHHI			0xFFC03010	/* Multicast Hash Table High (Bins 63-32) Register              */
+#define EMAC_STAADD			0xFFC03014	/* Station Management Address Register                                  */
+#define EMAC_STADAT			0xFFC03018	/* Station Management Data Register                                     */
+#define EMAC_FLC			0xFFC0301C	/* Flow Control Register                                                                */
+#define EMAC_VLAN1			0xFFC03020	/* VLAN1 Tag Register                                                                   */
+#define EMAC_VLAN2			0xFFC03024	/* VLAN2 Tag Register                                                                   */
+#define EMAC_WKUP_CTL		0xFFC0302C	/* Wake-Up Control/Status Register                                              */
+#define EMAC_WKUP_FFMSK0	0xFFC03030	/* Wake-Up Frame Filter 0 Byte Mask Register                    */
+#define EMAC_WKUP_FFMSK1	0xFFC03034	/* Wake-Up Frame Filter 1 Byte Mask Register                    */
+#define EMAC_WKUP_FFMSK2	0xFFC03038	/* Wake-Up Frame Filter 2 Byte Mask Register                    */
+#define EMAC_WKUP_FFMSK3	0xFFC0303C	/* Wake-Up Frame Filter 3 Byte Mask Register                    */
+#define EMAC_WKUP_FFCMD		0xFFC03040	/* Wake-Up Frame Filter Commands Register                               */
+#define EMAC_WKUP_FFOFF		0xFFC03044	/* Wake-Up Frame Filter Offsets Register                                */
+#define EMAC_WKUP_FFCRC0	0xFFC03048	/* Wake-Up Frame Filter 0,1 CRC-16 Register                             */
+#define EMAC_WKUP_FFCRC1	0xFFC0304C	/* Wake-Up Frame Filter 2,3 CRC-16 Register                             */
+
+#define	EMAC_SYSCTL			0xFFC03060	/* EMAC System Control Register                                                 */
+#define EMAC_SYSTAT			0xFFC03064	/* EMAC System Status Register                                                  */
+#define EMAC_RX_STAT		0xFFC03068	/* RX Current Frame Status Register                                             */
+#define EMAC_RX_STKY		0xFFC0306C	/* RX Sticky Frame Status Register                                              */
+#define EMAC_RX_IRQE		0xFFC03070	/* RX Frame Status Interrupt Enables Register                   */
+#define EMAC_TX_STAT		0xFFC03074	/* TX Current Frame Status Register                                             */
+#define EMAC_TX_STKY		0xFFC03078	/* TX Sticky Frame Status Register                                              */
+#define EMAC_TX_IRQE		0xFFC0307C	/* TX Frame Status Interrupt Enables Register                   */
+
+#define EMAC_MMC_CTL		0xFFC03080	/* MMC Counter Control Register                                                 */
+#define EMAC_MMC_RIRQS		0xFFC03084	/* MMC RX Interrupt Status Register                                             */
+#define EMAC_MMC_RIRQE		0xFFC03088	/* MMC RX Interrupt Enables Register                                    */
+#define EMAC_MMC_TIRQS		0xFFC0308C	/* MMC TX Interrupt Status Register                                             */
+#define EMAC_MMC_TIRQE		0xFFC03090	/* MMC TX Interrupt Enables Register                                    */
+
+#define EMAC_RXC_OK			0xFFC03100	/* RX Frame Successful Count                                                    */
+#define EMAC_RXC_FCS		0xFFC03104	/* RX Frame FCS Failure Count                                                   */
+#define EMAC_RXC_ALIGN		0xFFC03108	/* RX Alignment Error Count                                                             */
+#define EMAC_RXC_OCTET		0xFFC0310C	/* RX Octets Successfully Received Count                                */
+#define EMAC_RXC_DMAOVF		0xFFC03110	/* Internal MAC Sublayer Error RX Frame Count                   */
+#define EMAC_RXC_UNICST		0xFFC03114	/* Unicast RX Frame Count                                                               */
+#define EMAC_RXC_MULTI		0xFFC03118	/* Multicast RX Frame Count                                                             */
+#define EMAC_RXC_BROAD		0xFFC0311C	/* Broadcast RX Frame Count                                                             */
+#define EMAC_RXC_LNERRI		0xFFC03120	/* RX Frame In Range Error Count                                                */
+#define EMAC_RXC_LNERRO		0xFFC03124	/* RX Frame Out Of Range Error Count                                    */
+#define EMAC_RXC_LONG		0xFFC03128	/* RX Frame Too Long Count                                                              */
+#define EMAC_RXC_MACCTL		0xFFC0312C	/* MAC Control RX Frame Count                                                   */
+#define EMAC_RXC_OPCODE		0xFFC03130	/* Unsupported Op-Code RX Frame Count                                   */
+#define EMAC_RXC_PAUSE		0xFFC03134	/* MAC Control Pause RX Frame Count                                             */
+#define EMAC_RXC_ALLFRM		0xFFC03138	/* Overall RX Frame Count                                                               */
+#define EMAC_RXC_ALLOCT		0xFFC0313C	/* Overall RX Octet Count                                                               */
+#define EMAC_RXC_TYPED		0xFFC03140	/* Type/Length Consistent RX Frame Count                                */
+#define EMAC_RXC_SHORT		0xFFC03144	/* RX Frame Fragment Count - Byte Count x < 64                  */
+#define EMAC_RXC_EQ64		0xFFC03148	/* Good RX Frame Count - Byte Count x = 64                              */
+#define EMAC_RXC_LT128		0xFFC0314C	/* Good RX Frame Count - Byte Count  64 <= x < 128              */
+#define EMAC_RXC_LT256		0xFFC03150	/* Good RX Frame Count - Byte Count 128 <= x < 256              */
+#define EMAC_RXC_LT512		0xFFC03154	/* Good RX Frame Count - Byte Count 256 <= x < 512              */
+#define EMAC_RXC_LT1024		0xFFC03158	/* Good RX Frame Count - Byte Count 512 <= x < 1024             */
+#define EMAC_RXC_GE1024		0xFFC0315C	/* Good RX Frame Count - Byte Count x >= 1024                   */
+
+#define EMAC_TXC_OK			0xFFC03180	/* TX Frame Successful Count                                                    */
+#define EMAC_TXC_1COL		0xFFC03184	/* TX Frames Successful After Single Collision Count    */
+#define EMAC_TXC_GT1COL		0xFFC03188	/* TX Frames Successful After Multiple Collisions Count */
+#define EMAC_TXC_OCTET		0xFFC0318C	/* TX Octets Successfully Received Count                                */
+#define EMAC_TXC_DEFER		0xFFC03190	/* TX Frame Delayed Due To Busy Count                                   */
+#define EMAC_TXC_LATECL		0xFFC03194	/* Late TX Collisions Count                                                             */
+#define EMAC_TXC_XS_COL		0xFFC03198	/* TX Frame Failed Due To Excessive Collisions Count    */
+#define EMAC_TXC_DMAUND		0xFFC0319C	/* Internal MAC Sublayer Error TX Frame Count                   */
+#define EMAC_TXC_CRSERR		0xFFC031A0	/* Carrier Sense Deasserted During TX Frame Count               */
+#define EMAC_TXC_UNICST		0xFFC031A4	/* Unicast TX Frame Count                                                               */
+#define EMAC_TXC_MULTI		0xFFC031A8	/* Multicast TX Frame Count                                                             */
+#define EMAC_TXC_BROAD		0xFFC031AC	/* Broadcast TX Frame Count                                                             */
+#define EMAC_TXC_XS_DFR		0xFFC031B0	/* TX Frames With Excessive Deferral Count                              */
+#define EMAC_TXC_MACCTL		0xFFC031B4	/* MAC Control TX Frame Count                                                   */
+#define EMAC_TXC_ALLFRM		0xFFC031B8	/* Overall TX Frame Count                                                               */
+#define EMAC_TXC_ALLOCT		0xFFC031BC	/* Overall TX Octet Count                                                               */
+#define EMAC_TXC_EQ64		0xFFC031C0	/* Good TX Frame Count - Byte Count x = 64                              */
+#define EMAC_TXC_LT128		0xFFC031C4	/* Good TX Frame Count - Byte Count  64 <= x < 128              */
+#define EMAC_TXC_LT256		0xFFC031C8	/* Good TX Frame Count - Byte Count 128 <= x < 256              */
+#define EMAC_TXC_LT512		0xFFC031CC	/* Good TX Frame Count - Byte Count 256 <= x < 512              */
+#define EMAC_TXC_LT1024		0xFFC031D0	/* Good TX Frame Count - Byte Count 512 <= x < 1024             */
+#define EMAC_TXC_GE1024		0xFFC031D4	/* Good TX Frame Count - Byte Count x >= 1024                   */
+#define EMAC_TXC_ABORT		0xFFC031D8	/* Total TX Frames Aborted Count                                                */
+
+/* Listing for IEEE-Supported Count Registers																	*/
+#define FramesReceivedOK				EMAC_RXC_OK	/* RX Frame Successful Count                                                    */
+#define FrameCheckSequenceErrors		EMAC_RXC_FCS	/* RX Frame FCS Failure Count                                                   */
+#define AlignmentErrors					EMAC_RXC_ALIGN	/* RX Alignment Error Count                                                             */
+#define OctetsReceivedOK				EMAC_RXC_OCTET	/* RX Octets Successfully Received Count                                */
+#define FramesLostDueToIntMACRcvError	EMAC_RXC_DMAOVF	/* Internal MAC Sublayer Error RX Frame Count                   */
+#define UnicastFramesReceivedOK			EMAC_RXC_UNICST	/* Unicast RX Frame Count                                                               */
+#define MulticastFramesReceivedOK		EMAC_RXC_MULTI	/* Multicast RX Frame Count                                                             */
+#define BroadcastFramesReceivedOK		EMAC_RXC_BROAD	/* Broadcast RX Frame Count                                                             */
+#define InRangeLengthErrors				EMAC_RXC_LNERRI	/* RX Frame In Range Error Count                                                */
+#define OutOfRangeLengthField			EMAC_RXC_LNERRO	/* RX Frame Out Of Range Error Count                                    */
+#define FrameTooLongErrors				EMAC_RXC_LONG	/* RX Frame Too Long Count                                                              */
+#define MACControlFramesReceived		EMAC_RXC_MACCTL	/* MAC Control RX Frame Count                                                   */
+#define UnsupportedOpcodesReceived		EMAC_RXC_OPCODE	/* Unsupported Op-Code RX Frame Count                                   */
+#define PAUSEMACCtrlFramesReceived		EMAC_RXC_PAUSE	/* MAC Control Pause RX Frame Count                                             */
+#define FramesReceivedAll				EMAC_RXC_ALLFRM	/* Overall RX Frame Count                                                               */
+#define OctetsReceivedAll				EMAC_RXC_ALLOCT	/* Overall RX Octet Count                                                               */
+#define TypedFramesReceived				EMAC_RXC_TYPED	/* Type/Length Consistent RX Frame Count                                */
+#define FramesLenLt64Received			EMAC_RXC_SHORT	/* RX Frame Fragment Count - Byte Count x < 64                  */
+#define FramesLenEq64Received			EMAC_RXC_EQ64	/* Good RX Frame Count - Byte Count x = 64                              */
+#define FramesLen65_127Received			EMAC_RXC_LT128	/* Good RX Frame Count - Byte Count  64 <= x < 128              */
+#define FramesLen128_255Received		EMAC_RXC_LT256	/* Good RX Frame Count - Byte Count 128 <= x < 256              */
+#define FramesLen256_511Received		EMAC_RXC_LT512	/* Good RX Frame Count - Byte Count 256 <= x < 512              */
+#define FramesLen512_1023Received		EMAC_RXC_LT1024	/* Good RX Frame Count - Byte Count 512 <= x < 1024             */
+#define FramesLen1024_MaxReceived		EMAC_RXC_GE1024	/* Good RX Frame Count - Byte Count x >= 1024                   */
+
+#define FramesTransmittedOK				EMAC_TXC_OK	/* TX Frame Successful Count                                                    */
+#define SingleCollisionFrames			EMAC_TXC_1COL	/* TX Frames Successful After Single Collision Count    */
+#define MultipleCollisionFrames			EMAC_TXC_GT1COL	/* TX Frames Successful After Multiple Collisions Count */
+#define OctetsTransmittedOK				EMAC_TXC_OCTET	/* TX Octets Successfully Received Count                                */
+#define FramesWithDeferredXmissions		EMAC_TXC_DEFER	/* TX Frame Delayed Due To Busy Count                                   */
+#define LateCollisions					EMAC_TXC_LATECL	/* Late TX Collisions Count                                                             */
+#define FramesAbortedDueToXSColls		EMAC_TXC_XS_COL	/* TX Frame Failed Due To Excessive Collisions Count    */
+#define FramesLostDueToIntMacXmitError	EMAC_TXC_DMAUND	/* Internal MAC Sublayer Error TX Frame Count                   */
+#define CarrierSenseErrors				EMAC_TXC_CRSERR	/* Carrier Sense Deasserted During TX Frame Count               */
+#define UnicastFramesXmittedOK			EMAC_TXC_UNICST	/* Unicast TX Frame Count                                                               */
+#define MulticastFramesXmittedOK		EMAC_TXC_MULTI	/* Multicast TX Frame Count                                                             */
+#define BroadcastFramesXmittedOK		EMAC_TXC_BROAD	/* Broadcast TX Frame Count                                                             */
+#define FramesWithExcessiveDeferral		EMAC_TXC_XS_DFR	/* TX Frames With Excessive Deferral Count                              */
+#define MACControlFramesTransmitted		EMAC_TXC_MACCTL	/* MAC Control TX Frame Count                                                   */
+#define FramesTransmittedAll			EMAC_TXC_ALLFRM	/* Overall TX Frame Count                                                               */
+#define OctetsTransmittedAll			EMAC_TXC_ALLOCT	/* Overall TX Octet Count                                                               */
+#define FramesLenEq64Transmitted		EMAC_TXC_EQ64	/* Good TX Frame Count - Byte Count x = 64                              */
+#define FramesLen65_127Transmitted		EMAC_TXC_LT128	/* Good TX Frame Count - Byte Count  64 <= x < 128              */
+#define FramesLen128_255Transmitted		EMAC_TXC_LT256	/* Good TX Frame Count - Byte Count 128 <= x < 256              */
+#define FramesLen256_511Transmitted		EMAC_TXC_LT512	/* Good TX Frame Count - Byte Count 256 <= x < 512              */
+#define FramesLen512_1023Transmitted	EMAC_TXC_LT1024	/* Good TX Frame Count - Byte Count 512 <= x < 1024             */
+#define FramesLen1024_MaxTransmitted	EMAC_TXC_GE1024	/* Good TX Frame Count - Byte Count x >= 1024                   */
+#define TxAbortedFrames					EMAC_TXC_ABORT	/* Total TX Frames Aborted Count                                                */
+
+/***********************************************************************************
+** System MMR Register Bits And Macros
+**
+** Disclaimer:	All macros are intended to make C and Assembly code more readable.
+**				Use these macros carefully, as any that do left shifts for field
+**				depositing will result in the lower order bits being destroyed.  Any
+**				macro that shifts left to properly position the bit-field should be
+**				used as part of an OR to initialize a register and NOT as a dynamic
+**				modifier UNLESS the lower order bits are saved and ORed back in when
+**				the macro is used.
+*************************************************************************************/
+/************************  ETHERNET 10/100 CONTROLLER MASKS  ************************/
+/* EMAC_OPMODE Masks																*/
+#define	RE			0x00000001	/* Receiver Enable                                                                      */
+#define	ASTP		0x00000002	/* Enable Automatic Pad Stripping On RX Frames          */
+#define	HU			0x00000010	/* Hash Filter Unicast Address                                          */
+#define	HM			0x00000020	/* Hash Filter Multicast Address                                        */
+#define	PAM			0x00000040	/* Pass-All-Multicast Mode Enable                                       */
+#define	PR			0x00000080	/* Promiscuous Mode Enable                                                      */
+#define	IFE			0x00000100	/* Inverse Filtering Enable                                                     */
+#define	DBF			0x00000200	/* Disable Broadcast Frame Reception                            */
+#define	PBF			0x00000400	/* Pass Bad Frames Enable                                                       */
+#define	PSF			0x00000800	/* Pass Short Frames Enable                                                     */
+#define	RAF			0x00001000	/* Receive-All Mode                                                                     */
+#define	TE			0x00010000	/* Transmitter Enable                                                           */
+#define	DTXPAD		0x00020000	/* Disable Automatic TX Padding                                         */
+#define	DTXCRC		0x00040000	/* Disable Automatic TX CRC Generation                          */
+#define	DC			0x00080000	/* Deferral Check                                                                       */
+#define	BOLMT		0x00300000	/* Back-Off Limit                                                                       */
+#define	BOLMT_10	0x00000000	/*              10-bit range                                                            */
+#define	BOLMT_8		0x00100000	/*              8-bit range                                                                     */
+#define	BOLMT_4		0x00200000	/*              4-bit range                                                                     */
+#define	BOLMT_1		0x00300000	/*              1-bit range                                                                     */
+#define	DRTY		0x00400000	/* Disable TX Retry On Collision                                        */
+#define	LCTRE		0x00800000	/* Enable TX Retry On Late Collision                            */
+#define	RMII		0x01000000	/* RMII/MII* Mode                                                                       */
+#define	RMII_10		0x02000000	/* Speed Select for RMII Port (10MBit/100MBit*)         */
+#define	FDMODE		0x04000000	/* Duplex Mode Enable (Full/Half*)                                      */
+#define	LB			0x08000000	/* Internal Loopback Enable                                                     */
+#define	DRO			0x10000000	/* Disable Receive Own Frames (Half-Duplex Mode)        */
+
+/* EMAC_STAADD Masks																*/
+#define	STABUSY		0x00000001	/* Initiate Station Mgt Reg Access / STA Busy Stat      */
+#define	STAOP		0x00000002	/* Station Management Operation Code (Write/Read*)      */
+#define	STADISPRE	0x00000004	/* Disable Preamble Generation                                          */
+#define	STAIE		0x00000008	/* Station Mgt. Transfer Done Interrupt Enable          */
+#define	REGAD		0x000007C0	/* STA Register Address                                                         */
+#define	PHYAD		0x0000F800	/* PHY Device Address                                                           */
+
+#define	SET_REGAD(x)	(((x)&0x1F)<<  6 )	/* Set STA Register Address                             */
+#define	SET_PHYAD(x)	(((x)&0x1F)<< 11 )	/* Set PHY Device Address                               */
+
+/* EMAC_STADAT Mask											*/
+#define	STADATA		0x0000FFFF	/* Station Management Data      */
+
+/* EMAC_FLC Masks																	*/
+#define	FLCBUSY		0x00000001	/* Send Flow Ctrl Frame / Flow Ctrl Busy Status         */
+#define	FLCE		0x00000002	/* Flow Control Enable                                                          */
+#define	PCF			0x00000004	/* Pass Control Frames                                                          */
+#define	BKPRSEN		0x00000008	/* Enable Backpressure                                                          */
+#define	FLCPAUSE	0xFFFF0000	/* Pause Time                                                                           */
+
+#define	SET_FLCPAUSE(x)	(((x)&0xFFFF)<< 16)	/* Set Pause Time                                               */
+
+/* EMAC_WKUP_CTL Masks																*/
+#define	CAPWKFRM	0x00000001	/* Capture Wake-Up Frames                                                       */
+#define	MPKE		0x00000002	/* Magic Packet Enable                                                          */
+#define	RWKE		0x00000004	/* Remote Wake-Up Frame Enable                                          */
+#define	GUWKE		0x00000008	/* Global Unicast Wake Enable                                           */
+#define	MPKS		0x00000020	/* Magic Packet Received Status                                         */
+#define	RWKS		0x00000F00	/* Wake-Up Frame Received Status, Filters 3:0           */
+
+/* EMAC_WKUP_FFCMD Masks															*/
+#define	WF0_E		0x00000001	/* Enable Wake-Up Filter 0                                                      */
+#define	WF0_T		0x00000008	/* Wake-Up Filter 0 Addr Type (Multicast/Unicast*)      */
+#define	WF1_E		0x00000100	/* Enable Wake-Up Filter 1                                                      */
+#define	WF1_T		0x00000800	/* Wake-Up Filter 1 Addr Type (Multicast/Unicast*)      */
+#define	WF2_E		0x00010000	/* Enable Wake-Up Filter 2                                                      */
+#define	WF2_T		0x00080000	/* Wake-Up Filter 2 Addr Type (Multicast/Unicast*)      */
+#define	WF3_E		0x01000000	/* Enable Wake-Up Filter 3                                                      */
+#define	WF3_T		0x08000000	/* Wake-Up Filter 3 Addr Type (Multicast/Unicast*)      */
+
+/* EMAC_WKUP_FFOFF Masks															*/
+#define	WF0_OFF		0x000000FF	/* Wake-Up Filter 0 Pattern Offset                                      */
+#define	WF1_OFF		0x0000FF00	/* Wake-Up Filter 1 Pattern Offset                                      */
+#define	WF2_OFF		0x00FF0000	/* Wake-Up Filter 2 Pattern Offset                                      */
+#define	WF3_OFF		0xFF000000	/* Wake-Up Filter 3 Pattern Offset                                      */
+
+#define	SET_WF0_OFF(x) (((x)&0xFF)<<  0 )	/* Set Wake-Up Filter 0 Byte Offset           */
+#define	SET_WF1_OFF(x) (((x)&0xFF)<<  8 )	/* Set Wake-Up Filter 1 Byte Offset           */
+#define	SET_WF2_OFF(x) (((x)&0xFF)<< 16 )	/* Set Wake-Up Filter 2 Byte Offset           */
+#define	SET_WF3_OFF(x) (((x)&0xFF)<< 24 )	/* Set Wake-Up Filter 3 Byte Offset           */
+/* Set ALL Offsets																	*/
+#define	SET_WF_OFFS(x0,x1,x2,x3) 	(SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
+
+/* EMAC_WKUP_FFCRC0 Masks															*/
+#define	WF0_CRC		0x0000FFFF	/* Wake-Up Filter 0 Pattern CRC                                         */
+#define	WF1_CRC		0xFFFF0000	/* Wake-Up Filter 1 Pattern CRC                                         */
+
+#define	SET_WF0_CRC(x) (((x)&0xFFFF)<<   0 )	/* Set Wake-Up Filter 0 Target CRC         */
+#define	SET_WF1_CRC(x) (((x)&0xFFFF)<<  16 )	/* Set Wake-Up Filter 1 Target CRC         */
+
+/* EMAC_WKUP_FFCRC1 Masks															*/
+#define	WF2_CRC		0x0000FFFF	/* Wake-Up Filter 2 Pattern CRC                                         */
+#define	WF3_CRC		0xFFFF0000	/* Wake-Up Filter 3 Pattern CRC                                         */
+
+#define	SET_WF2_CRC(x) (((x)&0xFFFF)<<   0 )	/* Set Wake-Up Filter 2 Target CRC         */
+#define	SET_WF3_CRC(x) (((x)&0xFFFF)<<  16 )	/* Set Wake-Up Filter 3 Target CRC         */
+
+/* EMAC_SYSCTL Masks																*/
+#define	PHYIE		0x00000001	/* PHY_INT Interrupt Enable                                                     */
+#define	RXDWA		0x00000002	/* Receive Frame DMA Word Alignment (Odd/Even*)         */
+#define	RXCKS		0x00000004	/* Enable RX Frame TCP/UDP Checksum Computation         */
+#define	TXDWA		0x00000010	/* Transmit Frame DMA Word Alignment (Odd/Even*)        */
+#define	MDCDIV		0x00003F00	/* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))]          */
+
+#define	SET_MDCDIV(x)	(((x)&0x3F)<< 8)	/* Set MDC Clock Divisor                                */
+
+/* EMAC_SYSTAT Masks															*/
+#define	PHYINT		0x00000001	/* PHY_INT Interrupt Status                                             */
+#define	MMCINT		0x00000002	/* MMC Counter Interrupt Status                                 */
+#define	RXFSINT		0x00000004	/* RX Frame-Status Interrupt Status                             */
+#define	TXFSINT		0x00000008	/* TX Frame-Status Interrupt Status                             */
+#define	WAKEDET		0x00000010	/* Wake-Up Detected Status                                              */
+#define	RXDMAERR	0x00000020	/* RX DMA Direction Error Status                                */
+#define	TXDMAERR	0x00000040	/* TX DMA Direction Error Status                                */
+#define	STMDONE		0x00000080	/* Station Mgt. Transfer Done Interrupt Status  */
+
+/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks							*/
+#define	RX_FRLEN	0x000007FF	/* Frame Length In Bytes                                                */
+#define	RX_COMP		0x00001000	/* RX Frame Complete                                                    */
+#define	RX_OK		0x00002000	/* RX Frame Received With No Errors                             */
+#define	RX_LONG		0x00004000	/* RX Frame Too Long Error                                              */
+#define	RX_ALIGN	0x00008000	/* RX Frame Alignment Error                                             */
+#define	RX_CRC		0x00010000	/* RX Frame CRC Error                                                   */
+#define	RX_LEN		0x00020000	/* RX Frame Length Error                                                */
+#define	RX_FRAG		0x00040000	/* RX Frame Fragment Error                                              */
+#define	RX_ADDR		0x00080000	/* RX Frame Address Filter Failed Error                 */
+#define	RX_DMAO		0x00100000	/* RX Frame DMA Overrun Error                                   */
+#define	RX_PHY		0x00200000	/* RX Frame PHY Error                                                   */
+#define	RX_LATE		0x00400000	/* RX Frame Late Collision Error                                */
+#define	RX_RANGE	0x00800000	/* RX Frame Length Field Out of Range Error             */
+#define	RX_MULTI	0x01000000	/* RX Multicast Frame Indicator                                 */
+#define	RX_BROAD	0x02000000	/* RX Broadcast Frame Indicator                                 */
+#define	RX_CTL		0x04000000	/* RX Control Frame Indicator                                   */
+#define	RX_UCTL		0x08000000	/* Unsupported RX Control Frame Indicator               */
+#define	RX_TYPE		0x10000000	/* RX Typed Frame Indicator                                             */
+#define	RX_VLAN1	0x20000000	/* RX VLAN1 Frame Indicator                                             */
+#define	RX_VLAN2	0x40000000	/* RX VLAN2 Frame Indicator                                             */
+#define	RX_ACCEPT	0x80000000	/* RX Frame Accepted Indicator                                  */
+
+/*  EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks							*/
+#define	TX_COMP		0x00000001	/* TX Frame Complete                                                    */
+#define	TX_OK		0x00000002	/* TX Frame Sent With No Errors                                 */
+#define	TX_ECOLL	0x00000004	/* TX Frame Excessive Collision Error                   */
+#define	TX_LATE		0x00000008	/* TX Frame Late Collision Error                                */
+#define	TX_DMAU		0x00000010	/* TX Frame DMA Underrun Error (STAT)                   */
+#define	TX_MACE		0x00000010	/* Internal MAC Error Detected (STKY and IRQE)  */
+#define	TX_EDEFER	0x00000020	/* TX Frame Excessive Deferral Error                    */
+#define	TX_BROAD	0x00000040	/* TX Broadcast Frame Indicator                                 */
+#define	TX_MULTI	0x00000080	/* TX Multicast Frame Indicator                                 */
+#define	TX_CCNT		0x00000F00	/* TX Frame Collision Count                                             */
+#define	TX_DEFER	0x00001000	/* TX Frame Deferred Indicator                                  */
+#define	TX_CRS		0x00002000	/* TX Frame Carrier Sense Not Asserted Error    */
+#define	TX_LOSS		0x00004000	/* TX Frame Carrier Lost During TX Error                */
+#define	TX_RETRY	0x00008000	/* TX Frame Successful After Retry                              */
+#define	TX_FRLEN	0x07FF0000	/* TX Frame Length (Bytes)                                              */
+
+/* EMAC_MMC_CTL Masks															*/
+#define	RSTC		0x00000001	/* Reset All Counters                                                   */
+#define	CROLL		0x00000002	/* Counter Roll-Over Enable                                             */
+#define	CCOR		0x00000004	/* Counter Clear-On-Read Mode Enable                    */
+#define	MMCE		0x00000008	/* Enable MMC Counter Operation                                 */
+
+/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks											*/
+#define	RX_OK_CNT		0x00000001	/* RX Frames Received With No Errors                    */
+#define	RX_FCS_CNT		0x00000002	/* RX Frames W/Frame Check Sequence Errors              */
+#define	RX_ALIGN_CNT	0x00000004	/* RX Frames With Alignment Errors                              */
+#define	RX_OCTET_CNT	0x00000008	/* RX Octets Received OK                                                */
+#define	RX_LOST_CNT		0x00000010	/* RX Frames Lost Due To Internal MAC RX Error  */
+#define	RX_UNI_CNT		0x00000020	/* Unicast RX Frames Received OK                                */
+#define	RX_MULTI_CNT	0x00000040	/* Multicast RX Frames Received OK                              */
+#define	RX_BROAD_CNT	0x00000080	/* Broadcast RX Frames Received OK                              */
+#define	RX_IRL_CNT		0x00000100	/* RX Frames With In-Range Length Errors                */
+#define	RX_ORL_CNT		0x00000200	/* RX Frames With Out-Of-Range Length Errors    */
+#define	RX_LONG_CNT		0x00000400	/* RX Frames With Frame Too Long Errors                 */
+#define	RX_MACCTL_CNT	0x00000800	/* MAC Control RX Frames Received                               */
+#define	RX_OPCODE_CTL	0x00001000	/* Unsupported Op-Code RX Frames Received               */
+#define	RX_PAUSE_CNT	0x00002000	/* PAUSEMAC Control RX Frames Received                  */
+#define	RX_ALLF_CNT		0x00004000	/* All RX Frames Received                                               */
+#define	RX_ALLO_CNT		0x00008000	/* All RX Octets Received                                               */
+#define	RX_TYPED_CNT	0x00010000	/* Typed RX Frames Received                                             */
+#define	RX_SHORT_CNT	0x00020000	/* RX Frame Fragments (< 64 Bytes) Received             */
+#define	RX_EQ64_CNT		0x00040000	/* 64-Byte RX Frames Received                                   */
+#define	RX_LT128_CNT	0x00080000	/* 65-127-Byte RX Frames Received                               */
+#define	RX_LT256_CNT	0x00100000	/* 128-255-Byte RX Frames Received                              */
+#define	RX_LT512_CNT	0x00200000	/* 256-511-Byte RX Frames Received                              */
+#define	RX_LT1024_CNT	0x00400000	/* 512-1023-Byte RX Frames Received                             */
+#define	RX_GE1024_CNT	0x00800000	/* 1024-Max-Byte RX Frames Received                             */
+
+/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks											*/
+#define	TX_OK_CNT		0x00000001	/* TX Frames Sent OK                                                    */
+#define	TX_SCOLL_CNT	0x00000002	/* TX Frames With Single Collisions                             */
+#define	TX_MCOLL_CNT	0x00000004	/* TX Frames With Multiple Collisions                   */
+#define	TX_OCTET_CNT	0x00000008	/* TX Octets Sent OK                                                    */
+#define	TX_DEFER_CNT	0x00000010	/* TX Frames With Deferred Transmission                 */
+#define	TX_LATE_CNT		0x00000020	/* TX Frames With Late Collisions                               */
+#define	TX_ABORTC_CNT	0x00000040	/* TX Frames Aborted Due To Excess Collisions   */
+#define	TX_LOST_CNT		0x00000080	/* TX Frames Lost Due To Internal MAC TX Error  */
+#define	TX_CRS_CNT		0x00000100	/* TX Frames With Carrier Sense Errors                  */
+#define	TX_UNI_CNT		0x00000200	/* Unicast TX Frames Sent                                               */
+#define	TX_MULTI_CNT	0x00000400	/* Multicast TX Frames Sent                                             */
+#define	TX_BROAD_CNT	0x00000800	/* Broadcast TX Frames Sent                                             */
+#define	TX_EXDEF_CTL	0x00001000	/* TX Frames With Excessive Deferral                    */
+#define	TX_MACCTL_CNT	0x00002000	/* MAC Control TX Frames Sent                                   */
+#define	TX_ALLF_CNT		0x00004000	/* All TX Frames Sent                                                   */
+#define	TX_ALLO_CNT		0x00008000	/* All TX Octets Sent                                                   */
+#define	TX_EQ64_CNT		0x00010000	/* 64-Byte TX Frames Sent                                               */
+#define	TX_LT128_CNT	0x00020000	/* 65-127-Byte TX Frames Sent                                   */
+#define	TX_LT256_CNT	0x00040000	/* 128-255-Byte TX Frames Sent                                  */
+#define	TX_LT512_CNT	0x00080000	/* 256-511-Byte TX Frames Sent                                  */
+#define	TX_LT1024_CNT	0x00100000	/* 512-1023-Byte TX Frames Sent                                 */
+#define	TX_GE1024_CNT	0x00200000	/* 1024-Max-Byte TX Frames Sent                                 */
+#define	TX_ABORT_CNT	0x00400000	/* TX Frames Aborted                                                    */
+
+#endif				/* _DEF_BF537_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/dma.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/dma.h
new file mode 100644
index 0000000..5ae83b1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/dma.h
@@ -0,0 +1,31 @@
+/* mach/dma.h - arch-specific DMA defines
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define MAX_DMA_CHANNELS 16
+
+#define CH_PPI 			    0
+#define CH_EMAC_RX 		    1
+#define CH_EMAC_TX 		    2
+#define CH_SPORT0_RX 		3
+#define CH_SPORT0_TX 		4
+#define CH_SPORT1_RX 		5
+#define CH_SPORT1_TX 		6
+#define CH_SPI 			    7
+#define CH_UART0_RX 		8
+#define CH_UART0_TX 		9
+#define CH_UART1_RX 		10
+#define CH_UART1_TX 		11
+
+#define CH_MEM_STREAM0_DEST	12	 /* TX */
+#define CH_MEM_STREAM0_SRC  	13	 /* RX */
+#define CH_MEM_STREAM1_DEST	14	 /* TX */
+#define CH_MEM_STREAM1_SRC 	15	 /* RX */
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/gpio.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/gpio.h
new file mode 100644
index 0000000..fba606b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/gpio.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define MAX_BLACKFIN_GPIOS 48
+
+#define GPIO_PF0	0
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+#define GPIO_PG0	16
+#define GPIO_PG1	17
+#define GPIO_PG2	18
+#define GPIO_PG3	19
+#define GPIO_PG4	20
+#define GPIO_PG5	21
+#define GPIO_PG6	22
+#define GPIO_PG7	23
+#define GPIO_PG8	24
+#define GPIO_PG9	25
+#define GPIO_PG10	26
+#define GPIO_PG11	27
+#define GPIO_PG12	28
+#define GPIO_PG13	29
+#define GPIO_PG14	30
+#define GPIO_PG15	31
+#define GPIO_PH0	32
+#define GPIO_PH1	33
+#define GPIO_PH2	34
+#define GPIO_PH3	35
+#define GPIO_PH4	36
+#define GPIO_PH5	37
+#define GPIO_PH6	38
+#define GPIO_PH7	39
+#define GPIO_PH8	40
+#define GPIO_PH9	41
+#define GPIO_PH10	42
+#define GPIO_PH11	43
+#define GPIO_PH12	44
+#define GPIO_PH13	45
+#define GPIO_PH14	46
+#define GPIO_PH15	47
+
+#define PORT_F GPIO_PF0
+#define PORT_G GPIO_PG0
+#define PORT_H GPIO_PH0
+
+#include <mach-common/ports-f.h>
+#include <mach-common/ports-g.h>
+#include <mach-common/ports-h.h>
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/irq.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/irq.h
new file mode 100644
index 0000000..b6ed823
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/irq.h
@@ -0,0 +1,184 @@
+/*
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _BF537_IRQ_H_
+#define _BF537_IRQ_H_
+
+#include <mach-common/irq.h>
+
+#define NR_PERI_INTS		32
+
+#define IRQ_PLL_WAKEUP		BFIN_IRQ(0)	/* PLL Wakeup Interrupt */
+#define IRQ_DMA_ERROR		BFIN_IRQ(1)	/* DMA Error (general) */
+#define IRQ_GENERIC_ERROR	BFIN_IRQ(2)	/* GENERIC Error Interrupt */
+#define IRQ_RTC			BFIN_IRQ(3)	/* RTC Interrupt */
+#define IRQ_PPI			BFIN_IRQ(4)	/* DMA0 Interrupt (PPI) */
+#define IRQ_SPORT0_RX		BFIN_IRQ(5)	/* DMA3 Interrupt (SPORT0 RX) */
+#define IRQ_SPORT0_TX		BFIN_IRQ(6)	/* DMA4 Interrupt (SPORT0 TX) */
+#define IRQ_SPORT1_RX		BFIN_IRQ(7)	/* DMA5 Interrupt (SPORT1 RX) */
+#define IRQ_SPORT1_TX		BFIN_IRQ(8)	/* DMA6 Interrupt (SPORT1 TX) */
+#define IRQ_TWI			BFIN_IRQ(9)	/* TWI Interrupt */
+#define IRQ_SPI			BFIN_IRQ(10)	/* DMA7 Interrupt (SPI) */
+#define IRQ_UART0_RX		BFIN_IRQ(11)	/* DMA8 Interrupt (UART0 RX) */
+#define IRQ_UART0_TX		BFIN_IRQ(12)	/* DMA9 Interrupt (UART0 TX) */
+#define IRQ_UART1_RX		BFIN_IRQ(13)	/* DMA10 Interrupt (UART1 RX) */
+#define IRQ_UART1_TX		BFIN_IRQ(14)	/* DMA11 Interrupt (UART1 TX) */
+#define IRQ_CAN_RX		BFIN_IRQ(15)	/* CAN Receive Interrupt */
+#define IRQ_CAN_TX		BFIN_IRQ(16)	/* CAN Transmit Interrupt */
+#define IRQ_PH_INTA_MAC_RX	BFIN_IRQ(17)	/* Port H Interrupt A & DMA1 Interrupt (Ethernet RX) */
+#define IRQ_PH_INTB_MAC_TX	BFIN_IRQ(18)	/* Port H Interrupt B & DMA2 Interrupt (Ethernet TX) */
+#define IRQ_TIMER0		BFIN_IRQ(19)	/* Timer 0 */
+#define IRQ_TIMER1		BFIN_IRQ(20)	/* Timer 1 */
+#define IRQ_TIMER2		BFIN_IRQ(21)	/* Timer 2 */
+#define IRQ_TIMER3		BFIN_IRQ(22)	/* Timer 3 */
+#define IRQ_TIMER4		BFIN_IRQ(23)	/* Timer 4 */
+#define IRQ_TIMER5		BFIN_IRQ(24)	/* Timer 5 */
+#define IRQ_TIMER6		BFIN_IRQ(25)	/* Timer 6 */
+#define IRQ_TIMER7		BFIN_IRQ(26)	/* Timer 7 */
+#define IRQ_PF_INTA_PG_INTA	BFIN_IRQ(27)	/* Ports F&G Interrupt A */
+#define IRQ_PORTG_INTB		BFIN_IRQ(28)	/* Port G Interrupt B */
+#define IRQ_MEM_DMA0		BFIN_IRQ(29)	/* (Memory DMA Stream 0) */
+#define IRQ_MEM_DMA1		BFIN_IRQ(30)	/* (Memory DMA Stream 1) */
+#define IRQ_PF_INTB_WATCH	BFIN_IRQ(31)	/* Watchdog & Port F Interrupt B */
+
+#define SYS_IRQS		39
+
+#define IRQ_PPI_ERROR		42	/* PPI Error Interrupt */
+#define IRQ_CAN_ERROR		43	/* CAN Error Interrupt */
+#define IRQ_MAC_ERROR		44	/* MAC Status/Error Interrupt */
+#define IRQ_SPORT0_ERROR	45	/* SPORT0 Error Interrupt */
+#define IRQ_SPORT1_ERROR	46	/* SPORT1 Error Interrupt */
+#define IRQ_SPI_ERROR		47	/* SPI Error Interrupt */
+#define IRQ_UART0_ERROR		48	/* UART Error Interrupt */
+#define IRQ_UART1_ERROR		49	/* UART Error Interrupt */
+
+#define IRQ_PF0			50
+#define IRQ_PF1			51
+#define IRQ_PF2			52
+#define IRQ_PF3			53
+#define IRQ_PF4			54
+#define IRQ_PF5			55
+#define IRQ_PF6			56
+#define IRQ_PF7			57
+#define IRQ_PF8			58
+#define IRQ_PF9			59
+#define IRQ_PF10		60
+#define IRQ_PF11		61
+#define IRQ_PF12		62
+#define IRQ_PF13		63
+#define IRQ_PF14		64
+#define IRQ_PF15		65
+
+#define IRQ_PG0			66
+#define IRQ_PG1			67
+#define IRQ_PG2			68
+#define IRQ_PG3			69
+#define IRQ_PG4			70
+#define IRQ_PG5			71
+#define IRQ_PG6			72
+#define IRQ_PG7			73
+#define IRQ_PG8			74
+#define IRQ_PG9			75
+#define IRQ_PG10		76
+#define IRQ_PG11		77
+#define IRQ_PG12		78
+#define IRQ_PG13		79
+#define IRQ_PG14		80
+#define IRQ_PG15		81
+
+#define IRQ_PH0			82
+#define IRQ_PH1			83
+#define IRQ_PH2			84
+#define IRQ_PH3			85
+#define IRQ_PH4			86
+#define IRQ_PH5			87
+#define IRQ_PH6			88
+#define IRQ_PH7			89
+#define IRQ_PH8			90
+#define IRQ_PH9			91
+#define IRQ_PH10		92
+#define IRQ_PH11		93
+#define IRQ_PH12		94
+#define IRQ_PH13		95
+#define IRQ_PH14		96
+#define IRQ_PH15		97
+
+#define GPIO_IRQ_BASE		IRQ_PF0
+
+#define IRQ_MAC_PHYINT		98	/* PHY_INT Interrupt */
+#define IRQ_MAC_MMCINT		99	/* MMC Counter Interrupt */
+#define IRQ_MAC_RXFSINT		100	/* RX Frame-Status Interrupt */
+#define IRQ_MAC_TXFSINT		101	/* TX Frame-Status Interrupt */
+#define IRQ_MAC_WAKEDET		102	/* Wake-Up Interrupt */
+#define IRQ_MAC_RXDMAERR	103	/* RX DMA Direction Error Interrupt */
+#define IRQ_MAC_TXDMAERR	104	/* TX DMA Direction Error Interrupt */
+#define IRQ_MAC_STMDONE		105	/* Station Mgt. Transfer Done Interrupt */
+
+#define IRQ_MAC_RX		106	/* DMA1 Interrupt (Ethernet RX) */
+#define IRQ_PORTH_INTA		107	/* Port H Interrupt A */
+
+#if 0 /* No Interrupt B support (yet) */
+#define IRQ_MAC_TX		108	/* DMA2 Interrupt (Ethernet TX) */
+#define IRQ_PORTH_INTB		109	/* Port H Interrupt B */
+#else
+#define IRQ_MAC_TX		IRQ_PH_INTB_MAC_TX
+#endif
+
+#define IRQ_PORTF_INTA		110	/* Port F Interrupt A */
+#define IRQ_PORTG_INTA		111	/* Port G Interrupt A */
+
+#if 0 /* No Interrupt B support (yet) */
+#define IRQ_WATCH		112	/* Watchdog Timer */
+#define IRQ_PORTF_INTB		113	/* Port F Interrupt B */
+#else
+#define IRQ_WATCH		IRQ_PF_INTB_WATCH
+#endif
+
+#define NR_MACH_IRQS		(113 + 1)
+
+/* IAR0 BIT FIELDS */
+#define IRQ_PLL_WAKEUP_POS	0
+#define IRQ_DMA_ERROR_POS	4
+#define IRQ_ERROR_POS		8
+#define IRQ_RTC_POS		12
+#define IRQ_PPI_POS		16
+#define IRQ_SPORT0_RX_POS	20
+#define IRQ_SPORT0_TX_POS	24
+#define IRQ_SPORT1_RX_POS	28
+
+/* IAR1 BIT FIELDS */
+#define IRQ_SPORT1_TX_POS	0
+#define IRQ_TWI_POS		4
+#define IRQ_SPI_POS		8
+#define IRQ_UART0_RX_POS	12
+#define IRQ_UART0_TX_POS	16
+#define IRQ_UART1_RX_POS	20
+#define IRQ_UART1_TX_POS	24
+#define IRQ_CAN_RX_POS		28
+
+/* IAR2 BIT FIELDS */
+#define IRQ_CAN_TX_POS		0
+#define IRQ_MAC_RX_POS		4
+#define IRQ_MAC_TX_POS		8
+#define IRQ_TIMER0_POS		12
+#define IRQ_TIMER1_POS		16
+#define IRQ_TIMER2_POS		20
+#define IRQ_TIMER3_POS		24
+#define IRQ_TIMER4_POS		28
+
+/* IAR3 BIT FIELDS */
+#define IRQ_TIMER5_POS		0
+#define IRQ_TIMER6_POS		4
+#define IRQ_TIMER7_POS		8
+#define IRQ_PROG_INTA_POS	12
+#define IRQ_PORTG_INTB_POS	16
+#define IRQ_MEM_DMA0_POS	20
+#define IRQ_MEM_DMA1_POS	24
+#define IRQ_WATCH_POS		28
+
+#define init_mach_irq init_mach_irq
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/mem_map.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/mem_map.h
new file mode 100644
index 0000000..942f08d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/mem_map.h
@@ -0,0 +1,147 @@
+/*
+ * BF537 memory map
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
+
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0x20300000	 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK2_BASE	0x20200000	 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK1_BASE	0x20100000	 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK0_BASE	0x20000000	 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x00100000	/* 1M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x800
+
+/* Level 1 Memory */
+
+/* Memory Map for ADSP-BF537 processors */
+
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
+#else
+#define BFIN_ICACHESIZE	(0*1024)
+#endif
+
+
+#ifdef CONFIG_BF537
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#define L1_CODE_LENGTH      0xC000
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+
+#endif /*CONFIG_BF537*/
+
+/* Memory Map for ADSP-BF536 processors */
+
+#ifdef CONFIG_BF536
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF804000
+#define L1_DATA_B_START     0xFF904000
+
+#define L1_CODE_LENGTH      0xC000
+
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x4000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x4000
+#define L1_DATA_B_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+
+#endif
+
+/* Memory Map for ADSP-BF534 processors */
+
+#ifdef CONFIG_BF534
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#define L1_CODE_LENGTH      0xC000
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/pll.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/pll.h
new file mode 100644
index 0000000..94cca67
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/pll.h
@@ -0,0 +1 @@
+#include <mach-common/pll.h>
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/portmux.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/portmux.h
new file mode 100644
index 0000000..71d9eae
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/include/mach/portmux.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES	(MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE)	/* We additionally handle PORTJ */
+
+#define P_UART0_TX	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
+#define P_UART0_RX	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
+#define P_UART1_TX	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
+#define P_UART1_RX	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0))
+#define P_TMR5		(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0))
+#define P_TMR4		(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0))
+#define P_TMR3		(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0))
+#define P_TMR2		(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
+#define P_TMR1		(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0))
+#define P_TMR0		(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0))
+#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0))
+#define P_SPI0_MOSI	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0))
+#define P_SPI0_MISO	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0))
+#define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
+#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
+#define P_PPI0_CLK	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
+#define P_DMAR0		(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+#define P_DMAR1		(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+#define P_TMR7		(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+#define P_TMR6		(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+#define P_SPI0_SSEL6	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+#define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+#define P_PPI0_FS3	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+#define P_PPI0_FS2	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+#define P_PPI0_FS1	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+#define P_TACLK0	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+#define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF10
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
+
+#define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
+#define P_PPI0_D1	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+#define P_PPI0_D2	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0))
+#define P_PPI0_D3	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
+#define P_PPI0_D4	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))
+#define P_PPI0_D5	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_PPI0_D6	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_PPI0_D7	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0))
+#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0))
+#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0))
+#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0))
+#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0))
+#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0))
+#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
+#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
+#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
+#define P_SPORT1_DRSEC	(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1))
+#define P_SPORT1_DTSEC	(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1))
+#define P_SPORT1_RSCLK	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1))
+#define P_SPORT1_RFS	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_SPORT1_DRPRI	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1))
+#define P_SPORT1_TSCLK	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1))
+#define P_SPORT1_TFS	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1))
+#define P_SPORT1_DTPRI	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1))
+
+#define P_MII0_ETxD0	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0))
+#define P_MII0_ETxD1	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0))
+#define P_MII0_ETxD2	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0))
+#define P_MII0_ETxD3	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0))
+#define P_MII0_ETxEN	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0))
+#define P_MII0_TxCLK	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0))
+#define P_MII0_PHYINT	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0))
+#define P_MII0_COL	(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0))
+#define P_MII0_ERxD0	(P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0))
+#define P_MII0_ERxD1	(P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0))
+#define P_MII0_ERxD2	(P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0))
+#define P_MII0_ERxD3	(P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0))
+#define P_MII0_ERxDV	(P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0))
+#define P_MII0_ERxCLK	(P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0))
+#define P_MII0_ERxER	(P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(0))
+#define P_MII0_CRS	(P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(0))
+#define P_RMII0_REF_CLK	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1))
+#define P_RMII0_MDINT	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1))
+#define P_RMII0_CRS_DV	(P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(1))
+
+#define PORT_PJ0	(GPIO_PH15 + 1)
+#define PORT_PJ1	(GPIO_PH15 + 2)
+#define PORT_PJ2	(GPIO_PH15 + 3)
+#define PORT_PJ3	(GPIO_PH15 + 4)
+#define PORT_PJ4	(GPIO_PH15 + 5)
+#define PORT_PJ5	(GPIO_PH15 + 6)
+#define PORT_PJ6	(GPIO_PH15 + 7)
+#define PORT_PJ7	(GPIO_PH15 + 8)
+#define PORT_PJ8	(GPIO_PH15 + 9)
+#define PORT_PJ9	(GPIO_PH15 + 10)
+#define PORT_PJ10	(GPIO_PH15 + 11)
+#define PORT_PJ11	(GPIO_PH15 + 12)
+
+#define P_MDC		(P_DEFINED | P_IDENT(PORT_PJ0) | P_FUNCT(0))
+#define P_MDIO		(P_DEFINED | P_IDENT(PORT_PJ1) | P_FUNCT(0))
+#define P_TWI0_SCL	(P_DEFINED | P_IDENT(PORT_PJ2) | P_FUNCT(0))
+#define P_TWI0_SDA	(P_DEFINED | P_IDENT(PORT_PJ3) | P_FUNCT(0))
+#define P_SPORT0_DRSEC	(P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(0))
+#define P_SPORT0_DTSEC	(P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(0))
+#define P_SPORT0_RSCLK	(P_DEFINED | P_IDENT(PORT_PJ6) | P_FUNCT(0))
+#define P_SPORT0_RFS	(P_DEFINED | P_IDENT(PORT_PJ7) | P_FUNCT(0))
+#define P_SPORT0_DRPRI	(P_DEFINED | P_IDENT(PORT_PJ8) | P_FUNCT(0))
+#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(PORT_PJ9) | P_FUNCT(0))
+#define P_SPORT0_TFS	(P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(0))
+#define P_SPORT0_DTPRI	(P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(0))
+#define P_CAN0_RX	(P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(1))
+#define P_CAN0_TX	(P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(1))
+#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(1))
+#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1))
+#define P_SPI0_SSEL7	(P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(2))
+
+#define P_MII0 {\
+	P_MII0_ETxD0, \
+	P_MII0_ETxD1, \
+	P_MII0_ETxD2, \
+	P_MII0_ETxD3, \
+	P_MII0_ETxEN, \
+	P_MII0_TxCLK, \
+	P_MII0_PHYINT, \
+	P_MII0_COL, \
+	P_MII0_ERxD0, \
+	P_MII0_ERxD1, \
+	P_MII0_ERxD2, \
+	P_MII0_ERxD3, \
+	P_MII0_ERxDV, \
+	P_MII0_ERxCLK, \
+	P_MII0_ERxER, \
+	P_MII0_CRS, \
+	P_MDC, \
+	P_MDIO, 0}
+
+#define P_RMII0 {\
+	P_MII0_ETxD0, \
+	P_MII0_ETxD1, \
+	P_MII0_ETxEN, \
+	P_MII0_ERxD0, \
+	P_MII0_ERxD1, \
+	P_MII0_ERxER, \
+	P_RMII0_REF_CLK, \
+	P_RMII0_MDINT, \
+	P_RMII0_CRS_DV, \
+	P_MDC, \
+	P_MDIO, 0}
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/ints-priority.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/ints-priority.c
new file mode 100644
index 0000000..a48baae
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf537/ints-priority.c
@@ -0,0 +1,214 @@
+/*
+ * Copyright 2005-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ * Set up the interrupt priorities
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <asm/blackfin.h>
+
+#include <asm/irq_handler.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/bfin_sport.h>
+#include <asm/bfin_can.h>
+#include <asm/bfin_dma.h>
+#include <asm/dpmc.h>
+
+void __init program_IAR(void)
+{
+	/* Program the IAR0 Register with the configured priority */
+	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
+			    ((CONFIG_IRQ_DMA_ERROR - 7) << IRQ_DMA_ERROR_POS) |
+			    ((CONFIG_IRQ_ERROR - 7) << IRQ_ERROR_POS) |
+			    ((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS) |
+			    ((CONFIG_IRQ_PPI - 7) << IRQ_PPI_POS) |
+			    ((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) |
+			    ((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) |
+			    ((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS));
+
+	bfin_write_SIC_IAR1(((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) |
+			    ((CONFIG_IRQ_TWI - 7) << IRQ_TWI_POS) |
+			    ((CONFIG_IRQ_SPI - 7) << IRQ_SPI_POS) |
+			    ((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) |
+			    ((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS) |
+			    ((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) |
+			    ((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) |
+			    ((CONFIG_IRQ_CAN_RX - 7) << IRQ_CAN_RX_POS));
+
+	bfin_write_SIC_IAR2(((CONFIG_IRQ_CAN_TX - 7) << IRQ_CAN_TX_POS) |
+			    ((CONFIG_IRQ_MAC_RX - 7) << IRQ_MAC_RX_POS) |
+			    ((CONFIG_IRQ_MAC_TX - 7) << IRQ_MAC_TX_POS) |
+			    ((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
+			    ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) |
+			    ((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
+			    ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
+			    ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS));
+
+	bfin_write_SIC_IAR3(((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
+			    ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
+			    ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) |
+			    ((CONFIG_IRQ_PROG_INTA - 7) << IRQ_PROG_INTA_POS) |
+			    ((CONFIG_IRQ_PORTG_INTB - 7) << IRQ_PORTG_INTB_POS) |
+			    ((CONFIG_IRQ_MEM_DMA0 - 7) << IRQ_MEM_DMA0_POS) |
+			    ((CONFIG_IRQ_MEM_DMA1 - 7) << IRQ_MEM_DMA1_POS) |
+			    ((CONFIG_IRQ_WATCH - 7) << IRQ_WATCH_POS));
+
+	SSYNC();
+}
+
+#define SPI_ERR_MASK   (BIT_STAT_TXCOL | BIT_STAT_RBSY | BIT_STAT_MODF | BIT_STAT_TXE)	/* SPI_STAT */
+#define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF)	/* SPORT_STAT */
+#define PPI_ERR_MASK   (0xFFFF & ~FLD)	/* PPI_STATUS */
+#define EMAC_ERR_MASK  (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE)	/* EMAC_SYSTAT */
+#define UART_ERR_MASK  (0x6)	/* UART_IIR */
+#define CAN_ERR_MASK   (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF)	/* CAN_GIF */
+
+static int error_int_mask;
+
+static void bf537_generic_error_mask_irq(struct irq_data *d)
+{
+	error_int_mask &= ~(1L << (d->irq - IRQ_PPI_ERROR));
+	if (!error_int_mask)
+		bfin_internal_mask_irq(IRQ_GENERIC_ERROR);
+}
+
+static void bf537_generic_error_unmask_irq(struct irq_data *d)
+{
+	bfin_internal_unmask_irq(IRQ_GENERIC_ERROR);
+	error_int_mask |= 1L << (d->irq - IRQ_PPI_ERROR);
+}
+
+static struct irq_chip bf537_generic_error_irqchip = {
+	.name = "ERROR",
+	.irq_ack = bfin_ack_noop,
+	.irq_mask_ack = bf537_generic_error_mask_irq,
+	.irq_mask = bf537_generic_error_mask_irq,
+	.irq_unmask = bf537_generic_error_unmask_irq,
+};
+
+static void bf537_demux_error_irq(struct irq_desc *inta_desc)
+{
+	int irq = 0;
+
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
+	if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK)
+		irq = IRQ_MAC_ERROR;
+	else
+#endif
+	if (bfin_read_SPORT0_STAT() & SPORT_ERR_MASK)
+		irq = IRQ_SPORT0_ERROR;
+	else if (bfin_read_SPORT1_STAT() & SPORT_ERR_MASK)
+		irq = IRQ_SPORT1_ERROR;
+	else if (bfin_read_PPI_STATUS() & PPI_ERR_MASK)
+		irq = IRQ_PPI_ERROR;
+	else if (bfin_read_CAN_GIF() & CAN_ERR_MASK)
+		irq = IRQ_CAN_ERROR;
+	else if (bfin_read_SPI_STAT() & SPI_ERR_MASK)
+		irq = IRQ_SPI_ERROR;
+	else if ((bfin_read_UART0_IIR() & UART_ERR_MASK) == UART_ERR_MASK)
+		irq = IRQ_UART0_ERROR;
+	else if ((bfin_read_UART1_IIR() & UART_ERR_MASK) == UART_ERR_MASK)
+		irq = IRQ_UART1_ERROR;
+
+	if (irq) {
+		if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR)))
+			bfin_handle_irq(irq);
+		else {
+
+			switch (irq) {
+			case IRQ_PPI_ERROR:
+				bfin_write_PPI_STATUS(PPI_ERR_MASK);
+				break;
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
+			case IRQ_MAC_ERROR:
+				bfin_write_EMAC_SYSTAT(EMAC_ERR_MASK);
+				break;
+#endif
+			case IRQ_SPORT0_ERROR:
+				bfin_write_SPORT0_STAT(SPORT_ERR_MASK);
+				break;
+
+			case IRQ_SPORT1_ERROR:
+				bfin_write_SPORT1_STAT(SPORT_ERR_MASK);
+				break;
+
+			case IRQ_CAN_ERROR:
+				bfin_write_CAN_GIS(CAN_ERR_MASK);
+				break;
+
+			case IRQ_SPI_ERROR:
+				bfin_write_SPI_STAT(SPI_ERR_MASK);
+				break;
+
+			default:
+				break;
+			}
+
+			pr_debug("IRQ %d:"
+				 " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n",
+				 irq);
+		}
+	} else
+		pr_err("%s: IRQ ?: PERIPHERAL ERROR INTERRUPT ASSERTED BUT NO SOURCE FOUND\n",
+		       __func__);
+
+}
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static int mac_rx_int_mask;
+
+static void bf537_mac_rx_mask_irq(struct irq_data *d)
+{
+	mac_rx_int_mask &= ~(1L << (d->irq - IRQ_MAC_RX));
+	if (!mac_rx_int_mask)
+		bfin_internal_mask_irq(IRQ_PH_INTA_MAC_RX);
+}
+
+static void bf537_mac_rx_unmask_irq(struct irq_data *d)
+{
+	bfin_internal_unmask_irq(IRQ_PH_INTA_MAC_RX);
+	mac_rx_int_mask |= 1L << (d->irq - IRQ_MAC_RX);
+}
+
+static struct irq_chip bf537_mac_rx_irqchip = {
+	.name = "ERROR",
+	.irq_ack = bfin_ack_noop,
+	.irq_mask_ack = bf537_mac_rx_mask_irq,
+	.irq_mask = bf537_mac_rx_mask_irq,
+	.irq_unmask = bf537_mac_rx_unmask_irq,
+};
+
+static void bf537_demux_mac_rx_irq(struct irq_desc *desc)
+{
+	if (bfin_read_DMA1_IRQ_STATUS() & (DMA_DONE | DMA_ERR))
+		bfin_handle_irq(IRQ_MAC_RX);
+	else
+		bfin_demux_gpio_irq(desc);
+}
+#endif
+
+void __init init_mach_irq(void)
+{
+	int irq;
+
+#if defined(CONFIG_BF537) || defined(CONFIG_BF536)
+	/* Clear EMAC Interrupt Status bits so we can demux it later */
+	bfin_write_EMAC_SYSTAT(-1);
+#endif
+
+	irq_set_chained_handler(IRQ_GENERIC_ERROR, bf537_demux_error_irq);
+	for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++)
+		irq_set_chip_and_handler(irq, &bf537_generic_error_irqchip,
+					 handle_level_irq);
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	irq_set_chained_handler(IRQ_PH_INTA_MAC_RX, bf537_demux_mac_rx_irq);
+	irq_set_chip_and_handler(IRQ_MAC_RX, &bf537_mac_rx_irqchip, handle_level_irq);
+	irq_set_chip_and_handler(IRQ_PORTH_INTA, &bf537_mac_rx_irqchip, handle_level_irq);
+
+	irq_set_chained_handler(IRQ_MAC_ERROR, bfin_demux_mac_status_irq);
+#endif
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/Kconfig
new file mode 100644
index 0000000..4aea85e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/Kconfig
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: GPL-2.0
+if (BF538 || BF539)
+
+source "arch/blackfin/mach-bf538/boards/Kconfig"
+
+menu "BF538 Specific Configuration"
+
+comment "Interrupt Priority Assignment"
+menu "Priority"
+
+config IRQ_PLL_WAKEUP
+	int "IRQ_PLL_WAKEUP"
+	default 7
+config IRQ_DMA0_ERROR
+	int "IRQ_DMA0_ERROR"
+	default 7
+config IRQ_PPI_ERROR
+	int "IRQ_PPI_ERROR"
+	default 7
+config IRQ_SPORT0_ERROR
+	int "IRQ_SPORT0_ERROR"
+	default 7
+config IRQ_SPORT1_ERROR
+	int "IRQ_SPORT1_ERROR"
+	default 7
+config IRQ_SPI0_ERROR
+	int "IRQ_SPI0_ERROR"
+	default 7
+config IRQ_UART0_ERROR
+	int "IRQ_UART0_ERROR"
+	default 7
+config IRQ_RTC
+	int "IRQ_RTC"
+	default 8
+config IRQ_PPI
+	int "IRQ_PPI"
+	default 8
+config IRQ_SPORT0_RX
+	int "IRQ_SPORT0_RX"
+	default 9
+config IRQ_SPORT0_TX
+	int "IRQ_SPORT0_TX"
+	default 9
+config IRQ_SPORT1_RX
+	int "IRQ_SPORT1_RX"
+	default 9
+config IRQ_SPORT1_TX
+	int "IRQ_SPORT1_TX"
+	default 9
+config IRQ_SPI0
+	int "IRQ_SPI0"
+	default 10
+config IRQ_UART0_RX
+	int "IRQ_UART0_RX"
+	default 10
+config IRQ_UART0_TX
+	int "IRQ_UART0_TX"
+	default 10
+config IRQ_TIMER0
+	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
+	default 8
+config IRQ_TIMER1
+	int "IRQ_TIMER1"
+	default 11
+config IRQ_TIMER2
+	int "IRQ_TIMER2"
+	default 11
+config IRQ_PORTF_INTA
+	int "IRQ_PORTF_INTA"
+	default 12
+config IRQ_PORTF_INTB
+	int "IRQ_PORTF_INTB"
+	default 12
+config IRQ_MEM0_DMA0
+	int "IRQ_MEM0_DMA0"
+	default 13
+config IRQ_MEM0_DMA1
+	int "IRQ_MEM0_DMA1"
+	default 13
+config IRQ_WATCH
+	int "IRQ_WATCH"
+	default 13
+config IRQ_DMA1_ERROR
+	int "IRQ_DMA1_ERROR"
+	default 7
+config IRQ_SPORT2_ERROR
+	int "IRQ_SPORT2_ERROR"
+	default 7
+config IRQ_SPORT3_ERROR
+	int "IRQ_SPORT3_ERROR"
+	default 7
+config IRQ_SPI1_ERROR
+	int "IRQ_SPI1_ERROR"
+	default 7
+config IRQ_SPI2_ERROR
+	int "IRQ_SPI2_ERROR"
+	default 7
+config IRQ_UART1_ERROR
+	int "IRQ_UART1_ERROR"
+	default 7
+config IRQ_UART2_ERROR
+	int "IRQ_UART2_ERROR"
+	default 7
+config IRQ_CAN_ERROR
+	int "IRQ_CAN_ERROR"
+	default 7
+config IRQ_SPORT2_RX
+	int "IRQ_SPORT2_RX"
+	default 9
+config IRQ_SPORT2_TX
+	int "IRQ_SPORT2_TX"
+	default 9
+config IRQ_SPORT3_RX
+	int "IRQ_SPORT3_RX"
+	default 9
+config IRQ_SPORT3_TX
+	int "IRQ_SPORT3_TX"
+	default 9
+config IRQ_SPI1
+	int "IRQ_SPI1"
+	default 10
+config IRQ_SPI2
+	int "IRQ_SPI2"
+	default 10
+config IRQ_UART1_RX
+	int "IRQ_UART1_RX"
+	default 10
+config IRQ_UART1_TX
+	int "IRQ_UART1_TX"
+	default 10
+config IRQ_UART2_RX
+	int "IRQ_UART2_RX"
+	default 10
+config IRQ_UART2_TX
+	int "IRQ_UART2_TX"
+	default 10
+config IRQ_TWI0
+	int "IRQ_TWI0"
+	default 11
+config IRQ_TWI1
+	int "IRQ_TWI1"
+	default 11
+config IRQ_CAN_RX
+	int "IRQ_CAN_RX"
+	default 11
+config IRQ_CAN_TX
+	int "IRQ_CAN_TX"
+	default 11
+config IRQ_MEM1_DMA0
+	int "IRQ_MEM1_DMA0"
+	default 13
+config IRQ_MEM1_DMA1
+	int "IRQ_MEM1_DMA1"
+	default 13
+
+	help
+	  Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
+	  This applies to all the above.  It is not recommended to assign the
+	  highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/Makefile
new file mode 100644
index 0000000..c0be54f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/Makefile
@@ -0,0 +1,6 @@
+#
+# arch/blackfin/mach-bf538/Makefile
+#
+
+obj-y := ints-priority.o dma.o
+obj-$(CONFIG_GPIOLIB)	+= ext-gpio.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/boards/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/boards/Kconfig
new file mode 100644
index 0000000..114cff4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/boards/Kconfig
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+choice
+	prompt "System type"
+	default BFIN538_EZKIT
+	help
+	  Select your board!
+
+config BFIN538_EZKIT
+	bool "BF538-EZKIT"
+	help
+	  BF538-EZKIT-LITE board support.
+
+endchoice
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/boards/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/boards/Makefile
new file mode 100644
index 0000000..6143b32
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/boards/Makefile
@@ -0,0 +1,5 @@
+#
+# arch/blackfin/mach-bf538/boards/Makefile
+#
+
+obj-$(CONFIG_BFIN538_EZKIT)            += ezkit.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/boards/ezkit.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/boards/ezkit.c
new file mode 100644
index 0000000..1b6a52a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -0,0 +1,987 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/dma.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/input.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "ADI BF538-EZKIT";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif	/* CONFIG_RTC_DRV_BFIN */
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PG7,
+		.end = GPIO_PG7,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PG6,
+		.end = GPIO_PG6,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif	/* CONFIG_SERIAL_BFIN_UART0 */
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif	/* CONFIG_SERIAL_BFIN_UART1 */
+#ifdef CONFIG_SERIAL_BFIN_UART2
+static struct resource bfin_uart2_resources[] = {
+	{
+		.start = UART2_THR,
+		.end = UART2_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART2_TX,
+		.end = IRQ_UART2_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART2_RX,
+		.end = IRQ_UART2_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART2_ERROR,
+		.end = IRQ_UART2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART2_TX,
+		.end = CH_UART2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART2_RX,
+		.end = CH_UART2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart2_peripherals[] = {
+	P_UART2_TX, P_UART2_RX, 0
+};
+
+static struct platform_device bfin_uart2_device = {
+	.name = "bfin-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_uart2_resources),
+	.resource = bfin_uart2_resources,
+	.dev = {
+		.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
+	},
+};
+#endif	/* CONFIG_SERIAL_BFIN_UART2 */
+#endif	/* CONFIG_SERIAL_BFIN */
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif	/* CONFIG_BFIN_SIR0 */
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif	/* CONFIG_BFIN_SIR1 */
+#ifdef CONFIG_BFIN_SIR2
+static struct resource bfin_sir2_resources[] = {
+	{
+		.start = 0xFFC02100,
+		.end = 0xFFC021FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART2_RX,
+		.end = IRQ_UART2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART2_RX,
+		.end = CH_UART2_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir2_device = {
+	.name = "bfin_sir",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_sir2_resources),
+	.resource = bfin_sir2_resources,
+};
+#endif	/* CONFIG_BFIN_SIR2 */
+#endif	/* CONFIG_BFIN_SIR */
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif	/* CONFIG_SERIAL_BFIN_SPORT0_UART */
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif	/* CONFIG_SERIAL_BFIN_SPORT1_UART */
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+static struct resource bfin_sport2_uart_resources[] = {
+	{
+		.start = SPORT2_TCR1,
+		.end = SPORT2_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT2_RX,
+		.end = IRQ_SPORT2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT2_ERROR,
+		.end = IRQ_SPORT2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport2_peripherals[] = {
+	P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
+	P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
+};
+
+static struct platform_device bfin_sport2_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
+	.resource = bfin_sport2_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
+	},
+};
+#endif	/* CONFIG_SERIAL_BFIN_SPORT2_UART */
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+static struct resource bfin_sport3_uart_resources[] = {
+	{
+		.start = SPORT3_TCR1,
+		.end = SPORT3_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT3_RX,
+		.end = IRQ_SPORT3_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT3_ERROR,
+		.end = IRQ_SPORT3_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport3_peripherals[] = {
+	P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
+	P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
+};
+
+static struct platform_device bfin_sport3_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
+	.resource = bfin_sport3_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
+	},
+};
+#endif	/* CONFIG_SERIAL_BFIN_SPORT3_UART */
+#endif	/* CONFIG_SERIAL_BFIN_SPORT */
+
+#if IS_ENABLED(CONFIG_CAN_BFIN)
+static unsigned short bfin_can_peripherals[] = {
+	P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static struct resource bfin_can_resources[] = {
+	{
+		.start = 0xFFC02A00,
+		.end = 0xFFC02FFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CAN_RX,
+		.end = IRQ_CAN_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN_TX,
+		.end = IRQ_CAN_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN_ERROR,
+		.end = IRQ_CAN_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_can_device = {
+	.name = "bfin_can",
+	.num_resources = ARRAY_SIZE(bfin_can_resources),
+	.resource = bfin_can_resources,
+	.dev = {
+		.platform_data = &bfin_can_peripherals, /* Passed to driver */
+	},
+};
+#endif	/* CONFIG_CAN_BFIN */
+
+/*
+ *  USB-LAN EzExtender board
+ *  Driver needs to know address, irq and flag pin.
+ */
+#if IS_ENABLED(CONFIG_SMC91X)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20310300,
+		.end = 0x20310300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF0,
+		.end = IRQ_PF0,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif	/* CONFIG_SMC91X */
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* all SPI peripherals info goes here */
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+/* SPI flash chip (m25p16) */
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0x1c0000,
+		.offset = 0x40000
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif	/* CONFIG_MTD_M25P80 */
+#endif	/* CONFIG_SPI_BFIN5XX */
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
+#include <linux/platform_data/ad7879.h>
+static const struct ad7879_platform_data bfin_ad7879_ts_info = {
+	.model			= 7879,	/* Model = AD7879 */
+	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
+	.pressure_max		= 10000,
+	.pressure_min		= 0,
+	.first_conversion_delay = 3,	/* wait 512us before do a first conversion */
+	.acquisition_time 	= 1,	/* 4us acquisition time per sample */
+	.median			= 2,	/* do 8 measurements */
+	.averaging 		= 1,	/* take the average of 4 middle samples */
+	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
+	.gpio_export		= 1,	/* Export GPIO to gpiolib */
+	.gpio_base		= -1,	/* Dynamic allocation */
+};
+#endif	/* CONFIG_TOUCHSCREEN_AD7879 */
+
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+#include <asm/bfin-lq035q1.h>
+
+static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
+	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.ppi_mode = USE_RGB565_16_BIT_PPI,
+	.use_bl = 0,	/* let something else control the LCD Blacklight */
+	.gpio_bl = GPIO_PF7,
+};
+
+static struct resource bfin_lq035q1_resources[] = {
+	{
+		.start = IRQ_PPI_ERROR,
+		.end = IRQ_PPI_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_lq035q1_device = {
+	.name		= "bfin-lq035q1",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bfin_lq035q1_resources),
+	.resource 	= bfin_lq035q1_resources,
+	.dev		= {
+		.platform_data = &bfin_lq035q1_data,
+	},
+};
+#endif	/* CONFIG_FB_BFIN_LQ035Q1 */
+
+static struct spi_board_info bf538_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* SPI_SSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif	/* CONFIG_MTD_M25P80 */
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
+	{
+		.modalias = "ad7879",
+		.platform_data = &bfin_ad7879_ts_info,
+		.irq = IRQ_PF3,
+		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif	/* CONFIG_TOUCHSCREEN_AD7879_SPI */
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+	{
+		.modalias = "bfin-lq035q1-spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 2,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif	/* CONFIG_FB_BFIN_LQ035Q1 */
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+	},
+#endif	/* CONFIG_SPI_SPIDEV */
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI0,
+		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI (1) */
+static struct resource bfin_spi1_resource[] = {
+	[0] = {
+		.start = SPI1_REGBASE,
+		.end   = SPI1_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI1,
+		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI (2) */
+static struct resource bfin_spi2_resource[] = {
+	[0] = {
+		.start = SPI2_REGBASE,
+		.end   = SPI2_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI2,
+		.end   = CH_SPI2,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI2,
+		.end   = IRQ_SPI2,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bf538_spi_master_info0 = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bf538_spi_master0 = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bf538_spi_master_info0, /* Passed to driver */
+		},
+};
+
+static struct bfin5xx_spi_master bf538_spi_master_info1 = {
+	.num_chipselect = 2,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
+};
+
+static struct platform_device bf538_spi_master1 = {
+	.name = "bfin-spi",
+	.id = 1, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi1_resource),
+	.resource = bfin_spi1_resource,
+	.dev = {
+		.platform_data = &bf538_spi_master_info1, /* Passed to driver */
+		},
+};
+
+static struct bfin5xx_spi_master bf538_spi_master_info2 = {
+	.num_chipselect = 2,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI2_SCK, P_SPI2_MISO, P_SPI2_MOSI, 0},
+};
+
+static struct platform_device bf538_spi_master2 = {
+	.name = "bfin-spi",
+	.id = 2, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi2_resource),
+	.resource = bfin_spi2_resource,
+	.dev = {
+		.platform_data = &bf538_spi_master_info2, /* Passed to driver */
+		},
+};
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI0,
+		.end   = IRQ_TWI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi0_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+
+static const u16 bfin_twi1_pins[] = {P_TWI1_SCL, P_TWI1_SDA, 0};
+
+static struct resource bfin_twi1_resource[] = {
+	[0] = {
+		.start = TWI1_REGBASE,
+		.end   = TWI1_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI1,
+		.end   = IRQ_TWI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi1_device = {
+	.name = "i2c-bfin-twi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_twi1_resource),
+	.resource = bfin_twi1_resource,
+};
+#endif	/* CONFIG_I2C_BLACKFIN_TWI */
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PC7, 1, "gpio-keys: BTN0"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+/*
+ * Internal VLEV BF538SBBC1533
+ ****temporarily using these values until data sheet is updated
+ */
+	VRPAIR(VLEV_100, 150000000),
+	VRPAIR(VLEV_100, 250000000),
+	VRPAIR(VLEV_110, 276000000),
+	VRPAIR(VLEV_115, 301000000),
+	VRPAIR(VLEV_120, 525000000),
+	VRPAIR(VLEV_125, 550000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+static struct mtd_partition ezkit_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x180000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+	.width      = 2,
+	.parts      = ezkit_partitions,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+	.start = 0x20000000,
+#if IS_ENABLED(CONFIG_SMC91X)
+	.end   = 0x202fffff,
+#else
+	.end   = 0x203fffff,
+#endif
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezkit_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource,
+};
+#endif
+
+static struct platform_device *cm_bf538_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bf538_spi_master0,
+	&bf538_spi_master1,
+	&bf538_spi_master2,
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi0_device,
+	&i2c_bfin_twi1_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#ifdef CONFIG_BFIN_SIR2
+	&bfin_sir2_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_CAN_BFIN)
+	&bfin_can_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	&smc91x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
+	&bfin_lq035q1_device,
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+	&bfin_device_gpiokeys,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+	&ezkit_flash_device,
+#endif
+};
+
+static int __init ezkit_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(cm_bf538_devices, ARRAY_SIZE(cm_bf538_devices));
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	spi_register_board_info(bf538_spi_board_info,
+			ARRAY_SIZE(bf538_spi_board_info));
+#endif
+
+	return 0;
+}
+
+arch_initcall(ezkit_init);
+
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/dma.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/dma.c
new file mode 100644
index 0000000..cce8ef5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/dma.c
@@ -0,0 +1,141 @@
+/*
+ * the simple DMA Implementation for Blackfin
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS] = {
+	(struct dma_register *) DMA0_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_NEXT_DESC_PTR,
+	(struct dma_register *) DMA3_NEXT_DESC_PTR,
+	(struct dma_register *) DMA4_NEXT_DESC_PTR,
+	(struct dma_register *) DMA5_NEXT_DESC_PTR,
+	(struct dma_register *) DMA6_NEXT_DESC_PTR,
+	(struct dma_register *) DMA7_NEXT_DESC_PTR,
+	(struct dma_register *) DMA8_NEXT_DESC_PTR,
+	(struct dma_register *) DMA9_NEXT_DESC_PTR,
+	(struct dma_register *) DMA10_NEXT_DESC_PTR,
+	(struct dma_register *) DMA11_NEXT_DESC_PTR,
+	(struct dma_register *) DMA12_NEXT_DESC_PTR,
+	(struct dma_register *) DMA13_NEXT_DESC_PTR,
+	(struct dma_register *) DMA14_NEXT_DESC_PTR,
+	(struct dma_register *) DMA15_NEXT_DESC_PTR,
+	(struct dma_register *) DMA16_NEXT_DESC_PTR,
+	(struct dma_register *) DMA17_NEXT_DESC_PTR,
+	(struct dma_register *) DMA18_NEXT_DESC_PTR,
+	(struct dma_register *) DMA19_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D2_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S2_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D3_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S3_NEXT_DESC_PTR,
+};
+EXPORT_SYMBOL(dma_io_base_addr);
+
+int channel2irq(unsigned int channel)
+{
+	int ret_irq = -1;
+
+	switch (channel) {
+	case CH_PPI:
+		ret_irq = IRQ_PPI;
+		break;
+
+	case CH_UART0_RX:
+		ret_irq = IRQ_UART0_RX;
+		break;
+
+	case CH_UART0_TX:
+		ret_irq = IRQ_UART0_TX;
+		break;
+
+	case CH_UART1_RX:
+		ret_irq = IRQ_UART1_RX;
+		break;
+
+	case CH_UART1_TX:
+		ret_irq = IRQ_UART1_TX;
+		break;
+
+	case CH_UART2_RX:
+		ret_irq = IRQ_UART2_RX;
+		break;
+
+	case CH_UART2_TX:
+		ret_irq = IRQ_UART2_TX;
+		break;
+
+	case CH_SPORT0_RX:
+		ret_irq = IRQ_SPORT0_RX;
+		break;
+
+	case CH_SPORT0_TX:
+		ret_irq = IRQ_SPORT0_TX;
+		break;
+
+	case CH_SPORT1_RX:
+		ret_irq = IRQ_SPORT1_RX;
+		break;
+
+	case CH_SPORT1_TX:
+		ret_irq = IRQ_SPORT1_TX;
+		break;
+
+	case CH_SPORT2_RX:
+		ret_irq = IRQ_SPORT2_RX;
+		break;
+
+	case CH_SPORT2_TX:
+		ret_irq = IRQ_SPORT2_TX;
+		break;
+
+	case CH_SPORT3_RX:
+		ret_irq = IRQ_SPORT3_RX;
+		break;
+
+	case CH_SPORT3_TX:
+		ret_irq = IRQ_SPORT3_TX;
+		break;
+
+	case CH_SPI0:
+		ret_irq = IRQ_SPI0;
+		break;
+
+	case CH_SPI1:
+		ret_irq = IRQ_SPI1;
+		break;
+
+	case CH_SPI2:
+		ret_irq = IRQ_SPI2;
+		break;
+
+	case CH_MEM_STREAM0_SRC:
+	case CH_MEM_STREAM0_DEST:
+		ret_irq = IRQ_MEM0_DMA0;
+		break;
+	case CH_MEM_STREAM1_SRC:
+	case CH_MEM_STREAM1_DEST:
+		ret_irq = IRQ_MEM0_DMA1;
+		break;
+	case CH_MEM_STREAM2_SRC:
+	case CH_MEM_STREAM2_DEST:
+		ret_irq = IRQ_MEM1_DMA0;
+		break;
+	case CH_MEM_STREAM3_SRC:
+	case CH_MEM_STREAM3_DEST:
+		ret_irq = IRQ_MEM1_DMA1;
+		break;
+	}
+	return ret_irq;
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/ext-gpio.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/ext-gpio.c
new file mode 100644
index 0000000..48c1002
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/ext-gpio.c
@@ -0,0 +1,158 @@
+/*
+ * GPIOLIB interface for BF538/9 PORT C, D, and E GPIOs
+ *
+ * Copyright 2009-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <asm/blackfin.h>
+#include <asm/portmux.h>
+
+#define DEFINE_REG(reg, off) \
+static inline u16 read_##reg(void __iomem *port) \
+	{ return bfin_read16(port + off); } \
+static inline void write_##reg(void __iomem *port, u16 v) \
+	{ bfin_write16(port + off, v); }
+
+DEFINE_REG(PORTIO, 0x00)
+DEFINE_REG(PORTIO_CLEAR, 0x10)
+DEFINE_REG(PORTIO_SET, 0x20)
+DEFINE_REG(PORTIO_DIR, 0x40)
+DEFINE_REG(PORTIO_INEN, 0x50)
+
+static void __iomem *gpio_chip_to_mmr(struct gpio_chip *chip)
+{
+	switch (chip->base) {
+	default: /* not really needed, but keeps gcc happy */
+	case GPIO_PC0: return (void __iomem *)PORTCIO;
+	case GPIO_PD0: return (void __iomem *)PORTDIO;
+	case GPIO_PE0: return (void __iomem *)PORTEIO;
+	}
+}
+
+static int bf538_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	void __iomem *port = gpio_chip_to_mmr(chip);
+	return !!(read_PORTIO(port) & (1u << gpio));
+}
+
+static void bf538_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+{
+	void __iomem *port = gpio_chip_to_mmr(chip);
+	if (value)
+		write_PORTIO_SET(port, (1u << gpio));
+	else
+		write_PORTIO_CLEAR(port, (1u << gpio));
+}
+
+static int bf538_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	void __iomem *port = gpio_chip_to_mmr(chip);
+	write_PORTIO_DIR(port, read_PORTIO_DIR(port) & ~(1u << gpio));
+	write_PORTIO_INEN(port, read_PORTIO_INEN(port) | (1u << gpio));
+	return 0;
+}
+
+static int bf538_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value)
+{
+	void __iomem *port = gpio_chip_to_mmr(chip);
+	write_PORTIO_INEN(port, read_PORTIO_INEN(port) & ~(1u << gpio));
+	bf538_gpio_set_value(port, gpio, value);
+	write_PORTIO_DIR(port, read_PORTIO_DIR(port) | (1u << gpio));
+	return 0;
+}
+
+static int bf538_gpio_request(struct gpio_chip *chip, unsigned gpio)
+{
+	return bfin_special_gpio_request(chip->base + gpio, chip->label);
+}
+
+static void bf538_gpio_free(struct gpio_chip *chip, unsigned gpio)
+{
+	return bfin_special_gpio_free(chip->base + gpio);
+}
+
+/* We don't set the irq fields as these banks cannot generate interrupts */
+
+static struct gpio_chip bf538_portc_chip = {
+	.label = "GPIO-PC",
+	.direction_input = bf538_gpio_direction_input,
+	.get = bf538_gpio_get_value,
+	.direction_output = bf538_gpio_direction_output,
+	.set = bf538_gpio_set_value,
+	.request = bf538_gpio_request,
+	.free = bf538_gpio_free,
+	.base = GPIO_PC0,
+	.ngpio = GPIO_PC9 - GPIO_PC0 + 1,
+};
+
+static struct gpio_chip bf538_portd_chip = {
+	.label = "GPIO-PD",
+	.direction_input = bf538_gpio_direction_input,
+	.get = bf538_gpio_get_value,
+	.direction_output = bf538_gpio_direction_output,
+	.set = bf538_gpio_set_value,
+	.request = bf538_gpio_request,
+	.free = bf538_gpio_free,
+	.base = GPIO_PD0,
+	.ngpio = GPIO_PD13 - GPIO_PD0 + 1,
+};
+
+static struct gpio_chip bf538_porte_chip = {
+	.label = "GPIO-PE",
+	.direction_input = bf538_gpio_direction_input,
+	.get = bf538_gpio_get_value,
+	.direction_output = bf538_gpio_direction_output,
+	.set = bf538_gpio_set_value,
+	.request = bf538_gpio_request,
+	.free = bf538_gpio_free,
+	.base = GPIO_PE0,
+	.ngpio = GPIO_PE15 - GPIO_PE0 + 1,
+};
+
+static int __init bf538_extgpio_setup(void)
+{
+	return gpiochip_add_data(&bf538_portc_chip, NULL) |
+		gpiochip_add_data(&bf538_portd_chip, NULL) |
+		gpiochip_add_data(&bf538_porte_chip, NULL);
+}
+arch_initcall(bf538_extgpio_setup);
+
+#ifdef CONFIG_PM
+static struct {
+	u16 data, dir, inen;
+} gpio_bank_saved[3];
+
+static void __iomem * const port_bases[3] = {
+	(void *)PORTCIO,
+	(void *)PORTDIO,
+	(void *)PORTEIO,
+};
+
+void bfin_special_gpio_pm_hibernate_suspend(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(port_bases); ++i) {
+		gpio_bank_saved[i].data = read_PORTIO(port_bases[i]);
+		gpio_bank_saved[i].inen = read_PORTIO_INEN(port_bases[i]);
+		gpio_bank_saved[i].dir = read_PORTIO_DIR(port_bases[i]);
+	}
+}
+
+void bfin_special_gpio_pm_hibernate_restore(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(port_bases); ++i) {
+		write_PORTIO_INEN(port_bases[i], gpio_bank_saved[i].inen);
+		write_PORTIO_SET(port_bases[i],
+			gpio_bank_saved[i].data & gpio_bank_saved[i].dir);
+		write_PORTIO_DIR(port_bases[i], gpio_bank_saved[i].dir);
+	}
+}
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/anomaly.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/anomaly.h
new file mode 100644
index 0000000..eaac269
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -0,0 +1,215 @@
+/*
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
+ *
+ * Copyright 2004-2011 Analog Devices Inc.
+ * Licensed under the Clear BSD license.
+ */
+
+/* This file should be up to date with:
+ *  - Revision J, 05/23/2011; ADSP-BF538/BF538F Blackfin Processor Anomaly List
+ *  - Revision O, 05/23/2011; ADSP-BF539/BF539F Blackfin Processor Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* We do not support old silicon - sorry */
+#if __SILICON_REVISION__ < 4
+# error will not work on BF538/BF539 silicon version 0.0, 0.1, 0.2, or 0.3
+#endif
+
+#if defined(__ADSPBF538__)
+# define ANOMALY_BF538 1
+#else
+# define ANOMALY_BF538 0
+#endif
+#if defined(__ADSPBF539__)
+# define ANOMALY_BF539 1
+#else
+# define ANOMALY_BF539 0
+#endif
+
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
+#define ANOMALY_05000166 (1)
+/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
+#define ANOMALY_05000179 (1)
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
+#define ANOMALY_05000180 (1)
+/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */
+#define ANOMALY_05000193 (1)
+/* Current DMA Address Shows Wrong Value During Carry Fix */
+#define ANOMALY_05000199 (__SILICON_REVISION__ < 4)
+/* NMI Event at Boot Time Results in Unpredictable State */
+#define ANOMALY_05000219 (1)
+/* SPI Slave Boot Mode Modifies Registers from Reset Value */
+#define ANOMALY_05000229 (1)
+/* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */
+#define ANOMALY_05000233 (1)
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Maximum External Clock Speed for Timers */
+#define ANOMALY_05000253 (1)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
+#define ANOMALY_05000270 (__SILICON_REVISION__ < 4)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (ANOMALY_BF538)
+/* Writes to Synchronous SDRAM Memory May Be Lost */
+#define ANOMALY_05000273 (__SILICON_REVISION__ < 4)
+/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
+#define ANOMALY_05000277 (__SILICON_REVISION__ < 4)
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
+#define ANOMALY_05000278 (__SILICON_REVISION__ < 4)
+/* False Hardware Error when ISR Context Is Not Restored */
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 4)
+/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
+#define ANOMALY_05000282 (__SILICON_REVISION__ < 4)
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
+#define ANOMALY_05000283 (__SILICON_REVISION__ < 4)
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 4)
+/* Reads from CAN Mailbox and Acceptance Mask Area Can Fail */
+#define ANOMALY_05000291 (__SILICON_REVISION__ < 4)
+/* Hibernate Leakage Current Is Higher Than Specified */
+#define ANOMALY_05000293 (__SILICON_REVISION__ < 4)
+/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */
+#define ANOMALY_05000294 (1)
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
+#define ANOMALY_05000301 (__SILICON_REVISION__ < 4)
+/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
+#define ANOMALY_05000304 (__SILICON_REVISION__ < 4)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (__SILICON_REVISION__ < 4)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (__SILICON_REVISION__ < 5)
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
+#define ANOMALY_05000313 (__SILICON_REVISION__ < 4)
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
+#define ANOMALY_05000315 (__SILICON_REVISION__ < 4)
+/* PFx Glitch on Write to PORTFIO or PORTFIO_TOGGLE */
+#define ANOMALY_05000317 (__SILICON_REVISION__ < 4)	/* XXX: Same as 05000318 */
+/* PFx Glitch on Write to FIO_FLAG_D or FIO_FLAG_T */
+#define ANOMALY_05000318 (__SILICON_REVISION__ < 4)	/* XXX: Same as 05000317 */
+/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
+#define ANOMALY_05000355 (__SILICON_REVISION__ < 5)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (__SILICON_REVISION__ < 5)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (__SILICON_REVISION__ < 5)
+/* Entering Hibernate State with Peripheral Wakeups Enabled Draws Excess Current */
+#define ANOMALY_05000374 (__SILICON_REVISION__ == 4)
+/* GPIO Pins PC1 and PC4 Can Function as Normal Outputs */
+#define ANOMALY_05000375 (__SILICON_REVISION__ < 4)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 3)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* Specific GPIO Pins May Change State when Entering Hibernate */
+#define ANOMALY_05000436 (__SILICON_REVISION__ > 3)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI Points to Invalid Memory */
+#define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
+/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */
+#define ANOMALY_05000473 (1)
+/* Possible Lockup Condition when Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* PLL May Latch Incorrect Values Coming Out of Reset */
+#define ANOMALY_05000489 (1)
+/* Instruction Memory Stalls Can Cause IFLUSH to Fail */
+#define ANOMALY_05000491 (1)
+/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */
+#define ANOMALY_05000494 (1)
+/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */
+#define ANOMALY_05000501 (1)
+
+/*
+ * These anomalies have been "phased" out of analog.com anomaly sheets and are
+ * here to show running on older silicon just isn't feasible.
+ */
+
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 3)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
+#define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
+#define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000182 (0)
+#define ANOMALY_05000189 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
+#define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000234 (0)
+#define ANOMALY_05000242 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
+#define ANOMALY_05000254 (0)
+#define ANOMALY_05000257 (0)
+#define ANOMALY_05000263 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000305 (0)
+#define ANOMALY_05000311 (0)
+#define ANOMALY_05000323 (0)
+#define ANOMALY_05000353 (1)
+#define ANOMALY_05000362 (1)
+#define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
+#define ANOMALY_05000380 (0)
+#define ANOMALY_05000383 (0)
+#define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
+#define ANOMALY_05000412 (0)
+#define ANOMALY_05000430 (0)
+#define ANOMALY_05000432 (0)
+#define ANOMALY_05000435 (0)
+#define ANOMALY_05000440 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000480 (0)
+#define ANOMALY_05000485 (0)
+#define ANOMALY_16000030 (0)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/bf538.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/bf538.h
new file mode 100644
index 0000000..0cf5bf8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/bf538.h
@@ -0,0 +1,103 @@
+/*
+ * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF538
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __MACH_BF538_H__
+#define __MACH_BF538_H__
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15		0x8000
+#define IMASK_IVG14		0x4000
+#define IMASK_IVG13		0x2000
+#define IMASK_IVG12		0x1000
+
+#define IMASK_IVG11		0x0800
+#define IMASK_IVG10		0x0400
+#define IMASK_IVG9		0x0200
+#define IMASK_IVG8		0x0100
+
+#define IMASK_IVG7		0x0080
+#define IMASK_IVGTMR	0x0040
+#define IMASK_IVGHW		0x0020
+
+/***************************/
+
+#define BFIN_DSUBBANKS	4
+#define BFIN_DWAYS		2
+#define BFIN_DLINES		64
+#define BFIN_ISUBBANKS	4
+#define BFIN_IWAYS		4
+#define BFIN_ILINES		32
+
+#define WAY0_L			0x1
+#define WAY1_L			0x2
+#define WAY01_L			0x3
+#define WAY2_L			0x4
+#define WAY02_L			0x5
+#define	WAY12_L			0x6
+#define	WAY012_L		0x7
+
+#define	WAY3_L			0x8
+#define	WAY03_L			0x9
+#define	WAY13_L			0xA
+#define	WAY013_L		0xB
+
+#define	WAY32_L			0xC
+#define	WAY320_L		0xD
+#define	WAY321_L		0xE
+#define	WAYALL_L		0xF
+
+#define DMC_ENABLE (2<<2)	/*yes, 2, not 1 */
+
+/********************************* EBIU Settings ************************************/
+#define AMBCTL0VAL	((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL	((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#ifdef CONFIG_C_AMBEN_ALL
+#define V_AMBEN AMBEN_ALL
+#endif
+#ifdef CONFIG_C_AMBEN
+#define V_AMBEN 0x0
+#endif
+#ifdef CONFIG_C_AMBEN_B0
+#define V_AMBEN AMBEN_B0
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1
+#define V_AMBEN AMBEN_B0_B1
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1_B2
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+#ifdef CONFIG_C_CDPRIO
+#define V_CDPRIO 0x100
+#else
+#define V_CDPRIO 0x0
+#endif
+
+#define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO)
+
+#ifdef CONFIG_BF538
+#define CPU "BF538"
+#define CPUID 0x27C4
+#endif
+#ifdef CONFIG_BF539
+#define CPU "BF539"
+#define CPUID 0x27C4	/* FXIME:? */
+#endif
+
+#ifndef CPU
+#error "Unknown CPU type - This kernel doesn't seem to be configured properly"
+#endif
+
+#endif				/* __MACH_BF538_H__  */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/bfin_serial.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/bfin_serial.h
new file mode 100644
index 0000000..c66e276
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/bfin_serial.h
@@ -0,0 +1,14 @@
+/*
+ * mach/bfin_serial.h - Blackfin UART/Serial definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_SERIAL_H__
+#define __BFIN_MACH_SERIAL_H__
+
+#define BFIN_UART_NR_PORTS	3
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/blackfin.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/blackfin.h
new file mode 100644
index 0000000..791d084
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/blackfin.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2008-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#define BF538_FAMILY
+
+#include "bf538.h"
+#include "anomaly.h"
+
+#include <asm/def_LPBlackfin.h>
+#ifdef CONFIG_BF538
+# include "defBF538.h"
+#endif
+#ifdef CONFIG_BF539
+# include "defBF539.h"
+#endif
+
+#ifndef __ASSEMBLY__
+# include <asm/cdef_LPBlackfin.h>
+# ifdef CONFIG_BF538
+#  include "cdefBF538.h"
+# endif
+# ifdef CONFIG_BF539
+#  include "cdefBF539.h"
+# endif
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/cdefBF538.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
new file mode 100644
index 0000000..f6a5679
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
@@ -0,0 +1,1960 @@
+/*
+ * Copyright 2008-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _CDEF_BF538_H
+#define _CDEF_BF538_H
+
+#define bfin_writePTR(addr, val) bfin_write32(addr, val)
+
+#define bfin_read_PLL_CTL()            bfin_read16(PLL_CTL)
+#define bfin_read_PLL_DIV()            bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val)        bfin_write16(PLL_DIV, val)
+#define bfin_read_VR_CTL()             bfin_read16(VR_CTL)
+#define bfin_read_PLL_STAT()           bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val)       bfin_write16(PLL_STAT, val)
+#define bfin_read_PLL_LOCKCNT()        bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val)    bfin_write16(PLL_LOCKCNT, val)
+#define bfin_read_CHIPID()             bfin_read32(CHIPID)
+#define bfin_write_CHIPID(val)         bfin_write32(CHIPID, val)
+#define bfin_read_SWRST()              bfin_read16(SWRST)
+#define bfin_write_SWRST(val)          bfin_write16(SWRST, val)
+#define bfin_read_SYSCR()              bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val)          bfin_write16(SYSCR, val)
+#define bfin_read_SIC_RVECT()          bfin_readPTR(SIC_RVECT)
+#define bfin_write_SIC_RVECT(val)      bfin_writePTR(SIC_RVECT, val)
+#define bfin_read_SIC_IMASK0()         bfin_read32(SIC_IMASK0)
+#define bfin_write_SIC_IMASK0(val)     bfin_write32(SIC_IMASK0, val)
+#define bfin_read_SIC_IMASK1()         bfin_read32(SIC_IMASK1)
+#define bfin_write_SIC_IMASK1(val)     bfin_write32(SIC_IMASK1, val)
+#define bfin_read_SIC_IMASK(x)	       bfin_read32(SIC_IMASK0 + x * (SIC_IMASK1 - SIC_IMASK0))
+#define bfin_write_SIC_IMASK(x, val)   bfin_write32(SIC_IMASK0 + x * (SIC_IMASK1 - SIC_IMASK0), val)
+#define bfin_read_SIC_ISR0()           bfin_read32(SIC_ISR0)
+#define bfin_write_SIC_ISR0(val)       bfin_write32(SIC_ISR0, val)
+#define bfin_read_SIC_ISR1()           bfin_read32(SIC_ISR1)
+#define bfin_write_SIC_ISR1(val)       bfin_write32(SIC_ISR1, val)
+#define bfin_read_SIC_ISR(x)           bfin_read32(SIC_ISR0 + x * (SIC_ISR1 - SIC_ISR0))
+#define bfin_write_SIC_ISR(x, val)     bfin_write32(SIC_ISR0 + x * (SIC_ISR1 - SIC_ISR0), val)
+#define bfin_read_SIC_IWR0()           bfin_read32(SIC_IWR0)
+#define bfin_write_SIC_IWR0(val)       bfin_write32(SIC_IWR0, val)
+#define bfin_read_SIC_IWR1()           bfin_read32(SIC_IWR1)
+#define bfin_write_SIC_IWR1(val)       bfin_write32(SIC_IWR1, val)
+#define bfin_read_SIC_IWR(x)           bfin_read32(SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0))
+#define bfin_write_SIC_IWR(x, val)     bfin_write32(SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0), val)
+#define bfin_read_SIC_IAR0()           bfin_read32(SIC_IAR0)
+#define bfin_write_SIC_IAR0(val)       bfin_write32(SIC_IAR0, val)
+#define bfin_read_SIC_IAR1()           bfin_read32(SIC_IAR1)
+#define bfin_write_SIC_IAR1(val)       bfin_write32(SIC_IAR1, val)
+#define bfin_read_SIC_IAR2()           bfin_read32(SIC_IAR2)
+#define bfin_write_SIC_IAR2(val)       bfin_write32(SIC_IAR2, val)
+#define bfin_read_SIC_IAR3()           bfin_read32(SIC_IAR3)
+#define bfin_write_SIC_IAR3(val)       bfin_write32(SIC_IAR3, val)
+#define bfin_read_SIC_IAR4()           bfin_read32(SIC_IAR4)
+#define bfin_write_SIC_IAR4(val)       bfin_write32(SIC_IAR4, val)
+#define bfin_read_SIC_IAR5()           bfin_read32(SIC_IAR5)
+#define bfin_write_SIC_IAR5(val)       bfin_write32(SIC_IAR5, val)
+#define bfin_read_SIC_IAR6()           bfin_read32(SIC_IAR6)
+#define bfin_write_SIC_IAR6(val)       bfin_write32(SIC_IAR6, val)
+#define bfin_read_WDOG_CTL()           bfin_read16(WDOG_CTL)
+#define bfin_write_WDOG_CTL(val)       bfin_write16(WDOG_CTL, val)
+#define bfin_read_WDOG_CNT()           bfin_read32(WDOG_CNT)
+#define bfin_write_WDOG_CNT(val)       bfin_write32(WDOG_CNT, val)
+#define bfin_read_WDOG_STAT()          bfin_read32(WDOG_STAT)
+#define bfin_write_WDOG_STAT(val)      bfin_write32(WDOG_STAT, val)
+#define bfin_read_RTC_STAT()           bfin_read32(RTC_STAT)
+#define bfin_write_RTC_STAT(val)       bfin_write32(RTC_STAT, val)
+#define bfin_read_RTC_ICTL()           bfin_read16(RTC_ICTL)
+#define bfin_write_RTC_ICTL(val)       bfin_write16(RTC_ICTL, val)
+#define bfin_read_RTC_ISTAT()          bfin_read16(RTC_ISTAT)
+#define bfin_write_RTC_ISTAT(val)      bfin_write16(RTC_ISTAT, val)
+#define bfin_read_RTC_SWCNT()          bfin_read16(RTC_SWCNT)
+#define bfin_write_RTC_SWCNT(val)      bfin_write16(RTC_SWCNT, val)
+#define bfin_read_RTC_ALARM()          bfin_read32(RTC_ALARM)
+#define bfin_write_RTC_ALARM(val)      bfin_write32(RTC_ALARM, val)
+#define bfin_read_RTC_PREN()           bfin_read16(RTC_PREN)
+#define bfin_write_RTC_PREN(val)       bfin_write16(RTC_PREN, val)
+#define bfin_read_UART0_THR()          bfin_read16(UART0_THR)
+#define bfin_write_UART0_THR(val)      bfin_write16(UART0_THR, val)
+#define bfin_read_UART0_RBR()          bfin_read16(UART0_RBR)
+#define bfin_write_UART0_RBR(val)      bfin_write16(UART0_RBR, val)
+#define bfin_read_UART0_DLL()          bfin_read16(UART0_DLL)
+#define bfin_write_UART0_DLL(val)      bfin_write16(UART0_DLL, val)
+#define bfin_read_UART0_DLH()          bfin_read16(UART0_DLH)
+#define bfin_write_UART0_DLH(val)      bfin_write16(UART0_DLH, val)
+#define bfin_read_UART0_IER()          bfin_read16(UART0_IER)
+#define bfin_write_UART0_IER(val)      bfin_write16(UART0_IER, val)
+#define bfin_read_UART0_IIR()          bfin_read16(UART0_IIR)
+#define bfin_write_UART0_IIR(val)      bfin_write16(UART0_IIR, val)
+#define bfin_read_UART0_LCR()          bfin_read16(UART0_LCR)
+#define bfin_write_UART0_LCR(val)      bfin_write16(UART0_LCR, val)
+#define bfin_read_UART0_MCR()          bfin_read16(UART0_MCR)
+#define bfin_write_UART0_MCR(val)      bfin_write16(UART0_MCR, val)
+#define bfin_read_UART0_LSR()          bfin_read16(UART0_LSR)
+#define bfin_write_UART0_LSR(val)      bfin_write16(UART0_LSR, val)
+#define bfin_read_UART0_SCR()          bfin_read16(UART0_SCR)
+#define bfin_write_UART0_SCR(val)      bfin_write16(UART0_SCR, val)
+#define bfin_read_UART0_GCTL()         bfin_read16(UART0_GCTL)
+#define bfin_write_UART0_GCTL(val)     bfin_write16(UART0_GCTL, val)
+#define bfin_read_UART1_THR()          bfin_read16(UART1_THR)
+#define bfin_write_UART1_THR(val)      bfin_write16(UART1_THR, val)
+#define bfin_read_UART1_RBR()          bfin_read16(UART1_RBR)
+#define bfin_write_UART1_RBR(val)      bfin_write16(UART1_RBR, val)
+#define bfin_read_UART1_DLL()          bfin_read16(UART1_DLL)
+#define bfin_write_UART1_DLL(val)      bfin_write16(UART1_DLL, val)
+#define bfin_read_UART1_DLH()          bfin_read16(UART1_DLH)
+#define bfin_write_UART1_DLH(val)      bfin_write16(UART1_DLH, val)
+#define bfin_read_UART1_IER()          bfin_read16(UART1_IER)
+#define bfin_write_UART1_IER(val)      bfin_write16(UART1_IER, val)
+#define bfin_read_UART1_IIR()          bfin_read16(UART1_IIR)
+#define bfin_write_UART1_IIR(val)      bfin_write16(UART1_IIR, val)
+#define bfin_read_UART1_LCR()          bfin_read16(UART1_LCR)
+#define bfin_write_UART1_LCR(val)      bfin_write16(UART1_LCR, val)
+#define bfin_read_UART1_MCR()          bfin_read16(UART1_MCR)
+#define bfin_write_UART1_MCR(val)      bfin_write16(UART1_MCR, val)
+#define bfin_read_UART1_LSR()          bfin_read16(UART1_LSR)
+#define bfin_write_UART1_LSR(val)      bfin_write16(UART1_LSR, val)
+#define bfin_read_UART1_SCR()          bfin_read16(UART1_SCR)
+#define bfin_write_UART1_SCR(val)      bfin_write16(UART1_SCR, val)
+#define bfin_read_UART1_GCTL()         bfin_read16(UART1_GCTL)
+#define bfin_write_UART1_GCTL(val)     bfin_write16(UART1_GCTL, val)
+#define bfin_read_UART2_THR()          bfin_read16(UART2_THR)
+#define bfin_write_UART2_THR(val)      bfin_write16(UART2_THR, val)
+#define bfin_read_UART2_RBR()          bfin_read16(UART2_RBR)
+#define bfin_write_UART2_RBR(val)      bfin_write16(UART2_RBR, val)
+#define bfin_read_UART2_DLL()          bfin_read16(UART2_DLL)
+#define bfin_write_UART2_DLL(val)      bfin_write16(UART2_DLL, val)
+#define bfin_read_UART2_DLH()          bfin_read16(UART2_DLH)
+#define bfin_write_UART2_DLH(val)      bfin_write16(UART2_DLH, val)
+#define bfin_read_UART2_IER()          bfin_read16(UART2_IER)
+#define bfin_write_UART2_IER(val)      bfin_write16(UART2_IER, val)
+#define bfin_read_UART2_IIR()          bfin_read16(UART2_IIR)
+#define bfin_write_UART2_IIR(val)      bfin_write16(UART2_IIR, val)
+#define bfin_read_UART2_LCR()          bfin_read16(UART2_LCR)
+#define bfin_write_UART2_LCR(val)      bfin_write16(UART2_LCR, val)
+#define bfin_read_UART2_MCR()          bfin_read16(UART2_MCR)
+#define bfin_write_UART2_MCR(val)      bfin_write16(UART2_MCR, val)
+#define bfin_read_UART2_LSR()          bfin_read16(UART2_LSR)
+#define bfin_write_UART2_LSR(val)      bfin_write16(UART2_LSR, val)
+#define bfin_read_UART2_SCR()          bfin_read16(UART2_SCR)
+#define bfin_write_UART2_SCR(val)      bfin_write16(UART2_SCR, val)
+#define bfin_read_UART2_GCTL()         bfin_read16(UART2_GCTL)
+#define bfin_write_UART2_GCTL(val)     bfin_write16(UART2_GCTL, val)
+#define bfin_read_SPI0_CTL()           bfin_read16(SPI0_CTL)
+#define bfin_write_SPI0_CTL(val)       bfin_write16(SPI0_CTL, val)
+#define bfin_read_SPI0_FLG()           bfin_read16(SPI0_FLG)
+#define bfin_write_SPI0_FLG(val)       bfin_write16(SPI0_FLG, val)
+#define bfin_read_SPI0_STAT()          bfin_read16(SPI0_STAT)
+#define bfin_write_SPI0_STAT(val)      bfin_write16(SPI0_STAT, val)
+#define bfin_read_SPI0_TDBR()          bfin_read16(SPI0_TDBR)
+#define bfin_write_SPI0_TDBR(val)      bfin_write16(SPI0_TDBR, val)
+#define bfin_read_SPI0_RDBR()          bfin_read16(SPI0_RDBR)
+#define bfin_write_SPI0_RDBR(val)      bfin_write16(SPI0_RDBR, val)
+#define bfin_read_SPI0_BAUD()          bfin_read16(SPI0_BAUD)
+#define bfin_write_SPI0_BAUD(val)      bfin_write16(SPI0_BAUD, val)
+#define bfin_read_SPI0_SHADOW()        bfin_read16(SPI0_SHADOW)
+#define bfin_write_SPI0_SHADOW(val)    bfin_write16(SPI0_SHADOW, val)
+#define bfin_read_SPI1_CTL()           bfin_read16(SPI1_CTL)
+#define bfin_write_SPI1_CTL(val)       bfin_write16(SPI1_CTL, val)
+#define bfin_read_SPI1_FLG()           bfin_read16(SPI1_FLG)
+#define bfin_write_SPI1_FLG(val)       bfin_write16(SPI1_FLG, val)
+#define bfin_read_SPI1_STAT()          bfin_read16(SPI1_STAT)
+#define bfin_write_SPI1_STAT(val)      bfin_write16(SPI1_STAT, val)
+#define bfin_read_SPI1_TDBR()          bfin_read16(SPI1_TDBR)
+#define bfin_write_SPI1_TDBR(val)      bfin_write16(SPI1_TDBR, val)
+#define bfin_read_SPI1_RDBR()          bfin_read16(SPI1_RDBR)
+#define bfin_write_SPI1_RDBR(val)      bfin_write16(SPI1_RDBR, val)
+#define bfin_read_SPI1_BAUD()          bfin_read16(SPI1_BAUD)
+#define bfin_write_SPI1_BAUD(val)      bfin_write16(SPI1_BAUD, val)
+#define bfin_read_SPI1_SHADOW()        bfin_read16(SPI1_SHADOW)
+#define bfin_write_SPI1_SHADOW(val)    bfin_write16(SPI1_SHADOW, val)
+#define bfin_read_SPI2_CTL()           bfin_read16(SPI2_CTL)
+#define bfin_write_SPI2_CTL(val)       bfin_write16(SPI2_CTL, val)
+#define bfin_read_SPI2_FLG()           bfin_read16(SPI2_FLG)
+#define bfin_write_SPI2_FLG(val)       bfin_write16(SPI2_FLG, val)
+#define bfin_read_SPI2_STAT()          bfin_read16(SPI2_STAT)
+#define bfin_write_SPI2_STAT(val)      bfin_write16(SPI2_STAT, val)
+#define bfin_read_SPI2_TDBR()          bfin_read16(SPI2_TDBR)
+#define bfin_write_SPI2_TDBR(val)      bfin_write16(SPI2_TDBR, val)
+#define bfin_read_SPI2_RDBR()          bfin_read16(SPI2_RDBR)
+#define bfin_write_SPI2_RDBR(val)      bfin_write16(SPI2_RDBR, val)
+#define bfin_read_SPI2_BAUD()          bfin_read16(SPI2_BAUD)
+#define bfin_write_SPI2_BAUD(val)      bfin_write16(SPI2_BAUD, val)
+#define bfin_read_SPI2_SHADOW()        bfin_read16(SPI2_SHADOW)
+#define bfin_write_SPI2_SHADOW(val)    bfin_write16(SPI2_SHADOW, val)
+#define bfin_read_TIMER0_CONFIG()      bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val)  bfin_write16(TIMER0_CONFIG, val)
+#define bfin_read_TIMER0_COUNTER()     bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER, val)
+#define bfin_read_TIMER0_PERIOD()      bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val)  bfin_write32(TIMER0_PERIOD, val)
+#define bfin_read_TIMER0_WIDTH()       bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val)   bfin_write32(TIMER0_WIDTH, val)
+#define bfin_read_TIMER1_CONFIG()      bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val)  bfin_write16(TIMER1_CONFIG, val)
+#define bfin_read_TIMER1_COUNTER()     bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER, val)
+#define bfin_read_TIMER1_PERIOD()      bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val)  bfin_write32(TIMER1_PERIOD, val)
+#define bfin_read_TIMER1_WIDTH()       bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val)   bfin_write32(TIMER1_WIDTH, val)
+#define bfin_read_TIMER2_CONFIG()      bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val)  bfin_write16(TIMER2_CONFIG, val)
+#define bfin_read_TIMER2_COUNTER()     bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER, val)
+#define bfin_read_TIMER2_PERIOD()      bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val)  bfin_write32(TIMER2_PERIOD, val)
+#define bfin_read_TIMER2_WIDTH()       bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val)   bfin_write32(TIMER2_WIDTH, val)
+#define bfin_read_TIMER_ENABLE()       bfin_read16(TIMER_ENABLE)
+#define bfin_write_TIMER_ENABLE(val)   bfin_write16(TIMER_ENABLE, val)
+#define bfin_read_TIMER_DISABLE()      bfin_read16(TIMER_DISABLE)
+#define bfin_write_TIMER_DISABLE(val)  bfin_write16(TIMER_DISABLE, val)
+#define bfin_read_TIMER_STATUS()       bfin_read16(TIMER_STATUS)
+#define bfin_write_TIMER_STATUS(val)   bfin_write16(TIMER_STATUS, val)
+#define bfin_read_SPORT0_TCR1()        bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val)    bfin_write16(SPORT0_TCR1, val)
+#define bfin_read_SPORT0_TCR2()        bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val)    bfin_write16(SPORT0_TCR2, val)
+#define bfin_read_SPORT0_TCLKDIV()     bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val)
+#define bfin_read_SPORT0_TFSDIV()      bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val)  bfin_write16(SPORT0_TFSDIV, val)
+#define bfin_read_SPORT0_TX()          bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val)      bfin_write32(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX()          bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val)      bfin_write32(SPORT0_RX, val)
+#define bfin_read_SPORT0_RCR1()        bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val)    bfin_write16(SPORT0_RCR1, val)
+#define bfin_read_SPORT0_RCR2()        bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val)    bfin_write16(SPORT0_RCR2, val)
+#define bfin_read_SPORT0_RCLKDIV()     bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val)
+#define bfin_read_SPORT0_RFSDIV()      bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val)  bfin_write16(SPORT0_RFSDIV, val)
+#define bfin_read_SPORT0_STAT()        bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val)    bfin_write16(SPORT0_STAT, val)
+#define bfin_read_SPORT0_CHNL()        bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val)    bfin_write16(SPORT0_CHNL, val)
+#define bfin_read_SPORT0_MCMC1()       bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val)   bfin_write16(SPORT0_MCMC1, val)
+#define bfin_read_SPORT0_MCMC2()       bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val)   bfin_write16(SPORT0_MCMC2, val)
+#define bfin_read_SPORT0_MTCS0()       bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val)   bfin_write32(SPORT0_MTCS0, val)
+#define bfin_read_SPORT0_MTCS1()       bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val)   bfin_write32(SPORT0_MTCS1, val)
+#define bfin_read_SPORT0_MTCS2()       bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val)   bfin_write32(SPORT0_MTCS2, val)
+#define bfin_read_SPORT0_MTCS3()       bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val)   bfin_write32(SPORT0_MTCS3, val)
+#define bfin_read_SPORT0_MRCS0()       bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val)   bfin_write32(SPORT0_MRCS0, val)
+#define bfin_read_SPORT0_MRCS1()       bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val)   bfin_write32(SPORT0_MRCS1, val)
+#define bfin_read_SPORT0_MRCS2()       bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val)   bfin_write32(SPORT0_MRCS2, val)
+#define bfin_read_SPORT0_MRCS3()       bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val)   bfin_write32(SPORT0_MRCS3, val)
+#define bfin_read_SPORT1_TCR1()        bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val)    bfin_write16(SPORT1_TCR1, val)
+#define bfin_read_SPORT1_TCR2()        bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val)    bfin_write16(SPORT1_TCR2, val)
+#define bfin_read_SPORT1_TCLKDIV()     bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV, val)
+#define bfin_read_SPORT1_TFSDIV()      bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val)  bfin_write16(SPORT1_TFSDIV, val)
+#define bfin_read_SPORT1_TX()          bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val)      bfin_write32(SPORT1_TX, val)
+#define bfin_read_SPORT1_RX()          bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val)      bfin_write32(SPORT1_RX, val)
+#define bfin_read_SPORT1_RCR1()        bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val)    bfin_write16(SPORT1_RCR1, val)
+#define bfin_read_SPORT1_RCR2()        bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val)    bfin_write16(SPORT1_RCR2, val)
+#define bfin_read_SPORT1_RCLKDIV()     bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV, val)
+#define bfin_read_SPORT1_RFSDIV()      bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val)  bfin_write16(SPORT1_RFSDIV, val)
+#define bfin_read_SPORT1_STAT()        bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val)    bfin_write16(SPORT1_STAT, val)
+#define bfin_read_SPORT1_CHNL()        bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val)    bfin_write16(SPORT1_CHNL, val)
+#define bfin_read_SPORT1_MCMC1()       bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val)   bfin_write16(SPORT1_MCMC1, val)
+#define bfin_read_SPORT1_MCMC2()       bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val)   bfin_write16(SPORT1_MCMC2, val)
+#define bfin_read_SPORT1_MTCS0()       bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val)   bfin_write32(SPORT1_MTCS0, val)
+#define bfin_read_SPORT1_MTCS1()       bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val)   bfin_write32(SPORT1_MTCS1, val)
+#define bfin_read_SPORT1_MTCS2()       bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val)   bfin_write32(SPORT1_MTCS2, val)
+#define bfin_read_SPORT1_MTCS3()       bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val)   bfin_write32(SPORT1_MTCS3, val)
+#define bfin_read_SPORT1_MRCS0()       bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val)   bfin_write32(SPORT1_MRCS0, val)
+#define bfin_read_SPORT1_MRCS1()       bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val)   bfin_write32(SPORT1_MRCS1, val)
+#define bfin_read_SPORT1_MRCS2()       bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val)   bfin_write32(SPORT1_MRCS2, val)
+#define bfin_read_SPORT1_MRCS3()       bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val)   bfin_write32(SPORT1_MRCS3, val)
+#define bfin_read_SPORT2_TCR1()        bfin_read16(SPORT2_TCR1)
+#define bfin_write_SPORT2_TCR1(val)    bfin_write16(SPORT2_TCR1, val)
+#define bfin_read_SPORT2_TCR2()        bfin_read16(SPORT2_TCR2)
+#define bfin_write_SPORT2_TCR2(val)    bfin_write16(SPORT2_TCR2, val)
+#define bfin_read_SPORT2_TCLKDIV()     bfin_read16(SPORT2_TCLKDIV)
+#define bfin_write_SPORT2_TCLKDIV(val) bfin_write16(SPORT2_TCLKDIV, val)
+#define bfin_read_SPORT2_TFSDIV()      bfin_read16(SPORT2_TFSDIV)
+#define bfin_write_SPORT2_TFSDIV(val)  bfin_write16(SPORT2_TFSDIV, val)
+#define bfin_read_SPORT2_TX()          bfin_read32(SPORT2_TX)
+#define bfin_write_SPORT2_TX(val)      bfin_write32(SPORT2_TX, val)
+#define bfin_read_SPORT2_RX()          bfin_read32(SPORT2_RX)
+#define bfin_write_SPORT2_RX(val)      bfin_write32(SPORT2_RX, val)
+#define bfin_read_SPORT2_RCR1()        bfin_read16(SPORT2_RCR1)
+#define bfin_write_SPORT2_RCR1(val)    bfin_write16(SPORT2_RCR1, val)
+#define bfin_read_SPORT2_RCR2()        bfin_read16(SPORT2_RCR2)
+#define bfin_write_SPORT2_RCR2(val)    bfin_write16(SPORT2_RCR2, val)
+#define bfin_read_SPORT2_RCLKDIV()     bfin_read16(SPORT2_RCLKDIV)
+#define bfin_write_SPORT2_RCLKDIV(val) bfin_write16(SPORT2_RCLKDIV, val)
+#define bfin_read_SPORT2_RFSDIV()      bfin_read16(SPORT2_RFSDIV)
+#define bfin_write_SPORT2_RFSDIV(val)  bfin_write16(SPORT2_RFSDIV, val)
+#define bfin_read_SPORT2_STAT()        bfin_read16(SPORT2_STAT)
+#define bfin_write_SPORT2_STAT(val)    bfin_write16(SPORT2_STAT, val)
+#define bfin_read_SPORT2_CHNL()        bfin_read16(SPORT2_CHNL)
+#define bfin_write_SPORT2_CHNL(val)    bfin_write16(SPORT2_CHNL, val)
+#define bfin_read_SPORT2_MCMC1()       bfin_read16(SPORT2_MCMC1)
+#define bfin_write_SPORT2_MCMC1(val)   bfin_write16(SPORT2_MCMC1, val)
+#define bfin_read_SPORT2_MCMC2()       bfin_read16(SPORT2_MCMC2)
+#define bfin_write_SPORT2_MCMC2(val)   bfin_write16(SPORT2_MCMC2, val)
+#define bfin_read_SPORT2_MTCS0()       bfin_read32(SPORT2_MTCS0)
+#define bfin_write_SPORT2_MTCS0(val)   bfin_write32(SPORT2_MTCS0, val)
+#define bfin_read_SPORT2_MTCS1()       bfin_read32(SPORT2_MTCS1)
+#define bfin_write_SPORT2_MTCS1(val)   bfin_write32(SPORT2_MTCS1, val)
+#define bfin_read_SPORT2_MTCS2()       bfin_read32(SPORT2_MTCS2)
+#define bfin_write_SPORT2_MTCS2(val)   bfin_write32(SPORT2_MTCS2, val)
+#define bfin_read_SPORT2_MTCS3()       bfin_read32(SPORT2_MTCS3)
+#define bfin_write_SPORT2_MTCS3(val)   bfin_write32(SPORT2_MTCS3, val)
+#define bfin_read_SPORT2_MRCS0()       bfin_read32(SPORT2_MRCS0)
+#define bfin_write_SPORT2_MRCS0(val)   bfin_write32(SPORT2_MRCS0, val)
+#define bfin_read_SPORT2_MRCS1()       bfin_read32(SPORT2_MRCS1)
+#define bfin_write_SPORT2_MRCS1(val)   bfin_write32(SPORT2_MRCS1, val)
+#define bfin_read_SPORT2_MRCS2()       bfin_read32(SPORT2_MRCS2)
+#define bfin_write_SPORT2_MRCS2(val)   bfin_write32(SPORT2_MRCS2, val)
+#define bfin_read_SPORT2_MRCS3()       bfin_read32(SPORT2_MRCS3)
+#define bfin_write_SPORT2_MRCS3(val)   bfin_write32(SPORT2_MRCS3, val)
+#define bfin_read_SPORT3_TCR1()        bfin_read16(SPORT3_TCR1)
+#define bfin_write_SPORT3_TCR1(val)    bfin_write16(SPORT3_TCR1, val)
+#define bfin_read_SPORT3_TCR2()        bfin_read16(SPORT3_TCR2)
+#define bfin_write_SPORT3_TCR2(val)    bfin_write16(SPORT3_TCR2, val)
+#define bfin_read_SPORT3_TCLKDIV()     bfin_read16(SPORT3_TCLKDIV)
+#define bfin_write_SPORT3_TCLKDIV(val) bfin_write16(SPORT3_TCLKDIV, val)
+#define bfin_read_SPORT3_TFSDIV()      bfin_read16(SPORT3_TFSDIV)
+#define bfin_write_SPORT3_TFSDIV(val)  bfin_write16(SPORT3_TFSDIV, val)
+#define bfin_read_SPORT3_TX()          bfin_read32(SPORT3_TX)
+#define bfin_write_SPORT3_TX(val)      bfin_write32(SPORT3_TX, val)
+#define bfin_read_SPORT3_RX()          bfin_read32(SPORT3_RX)
+#define bfin_write_SPORT3_RX(val)      bfin_write32(SPORT3_RX, val)
+#define bfin_read_SPORT3_RCR1()        bfin_read16(SPORT3_RCR1)
+#define bfin_write_SPORT3_RCR1(val)    bfin_write16(SPORT3_RCR1, val)
+#define bfin_read_SPORT3_RCR2()        bfin_read16(SPORT3_RCR2)
+#define bfin_write_SPORT3_RCR2(val)    bfin_write16(SPORT3_RCR2, val)
+#define bfin_read_SPORT3_RCLKDIV()     bfin_read16(SPORT3_RCLKDIV)
+#define bfin_write_SPORT3_RCLKDIV(val) bfin_write16(SPORT3_RCLKDIV, val)
+#define bfin_read_SPORT3_RFSDIV()      bfin_read16(SPORT3_RFSDIV)
+#define bfin_write_SPORT3_RFSDIV(val)  bfin_write16(SPORT3_RFSDIV, val)
+#define bfin_read_SPORT3_STAT()        bfin_read16(SPORT3_STAT)
+#define bfin_write_SPORT3_STAT(val)    bfin_write16(SPORT3_STAT, val)
+#define bfin_read_SPORT3_CHNL()        bfin_read16(SPORT3_CHNL)
+#define bfin_write_SPORT3_CHNL(val)    bfin_write16(SPORT3_CHNL, val)
+#define bfin_read_SPORT3_MCMC1()       bfin_read16(SPORT3_MCMC1)
+#define bfin_write_SPORT3_MCMC1(val)   bfin_write16(SPORT3_MCMC1, val)
+#define bfin_read_SPORT3_MCMC2()       bfin_read16(SPORT3_MCMC2)
+#define bfin_write_SPORT3_MCMC2(val)   bfin_write16(SPORT3_MCMC2, val)
+#define bfin_read_SPORT3_MTCS0()       bfin_read32(SPORT3_MTCS0)
+#define bfin_write_SPORT3_MTCS0(val)   bfin_write32(SPORT3_MTCS0, val)
+#define bfin_read_SPORT3_MTCS1()       bfin_read32(SPORT3_MTCS1)
+#define bfin_write_SPORT3_MTCS1(val)   bfin_write32(SPORT3_MTCS1, val)
+#define bfin_read_SPORT3_MTCS2()       bfin_read32(SPORT3_MTCS2)
+#define bfin_write_SPORT3_MTCS2(val)   bfin_write32(SPORT3_MTCS2, val)
+#define bfin_read_SPORT3_MTCS3()       bfin_read32(SPORT3_MTCS3)
+#define bfin_write_SPORT3_MTCS3(val)   bfin_write32(SPORT3_MTCS3, val)
+#define bfin_read_SPORT3_MRCS0()       bfin_read32(SPORT3_MRCS0)
+#define bfin_write_SPORT3_MRCS0(val)   bfin_write32(SPORT3_MRCS0, val)
+#define bfin_read_SPORT3_MRCS1()       bfin_read32(SPORT3_MRCS1)
+#define bfin_write_SPORT3_MRCS1(val)   bfin_write32(SPORT3_MRCS1, val)
+#define bfin_read_SPORT3_MRCS2()       bfin_read32(SPORT3_MRCS2)
+#define bfin_write_SPORT3_MRCS2(val)   bfin_write32(SPORT3_MRCS2, val)
+#define bfin_read_SPORT3_MRCS3()       bfin_read32(SPORT3_MRCS3)
+#define bfin_write_SPORT3_MRCS3(val)   bfin_write32(SPORT3_MRCS3, val)
+#define bfin_read_PORTFIO()            bfin_read16(PORTFIO)
+#define bfin_write_PORTFIO(val)        bfin_write16(PORTFIO, val)
+#define bfin_read_PORTFIO_CLEAR()      bfin_read16(PORTFIO_CLEAR)
+#define bfin_write_PORTFIO_CLEAR(val)  bfin_write16(PORTFIO_CLEAR, val)
+#define bfin_read_PORTFIO_SET()        bfin_read16(PORTFIO_SET)
+#define bfin_write_PORTFIO_SET(val)    bfin_write16(PORTFIO_SET, val)
+#define bfin_read_PORTFIO_TOGGLE()     bfin_read16(PORTFIO_TOGGLE)
+#define bfin_write_PORTFIO_TOGGLE(val) bfin_write16(PORTFIO_TOGGLE, val)
+#define bfin_read_PORTFIO_MASKA()      bfin_read16(PORTFIO_MASKA)
+#define bfin_write_PORTFIO_MASKA(val)  bfin_write16(PORTFIO_MASKA, val)
+#define bfin_read_PORTFIO_MASKA_CLEAR() bfin_read16(PORTFIO_MASKA_CLEAR)
+#define bfin_write_PORTFIO_MASKA_CLEAR(val) bfin_write16(PORTFIO_MASKA_CLEAR, val)
+#define bfin_read_PORTFIO_MASKA_SET()  bfin_read16(PORTFIO_MASKA_SET)
+#define bfin_write_PORTFIO_MASKA_SET(val) bfin_write16(PORTFIO_MASKA_SET, val)
+#define bfin_read_PORTFIO_MASKA_TOGGLE() bfin_read16(PORTFIO_MASKA_TOGGLE)
+#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE, val)
+#define bfin_read_PORTFIO_MASKB()      bfin_read16(PORTFIO_MASKB)
+#define bfin_write_PORTFIO_MASKB(val)  bfin_write16(PORTFIO_MASKB, val)
+#define bfin_read_PORTFIO_MASKB_CLEAR() bfin_read16(PORTFIO_MASKB_CLEAR)
+#define bfin_write_PORTFIO_MASKB_CLEAR(val) bfin_write16(PORTFIO_MASKB_CLEAR, val)
+#define bfin_read_PORTFIO_MASKB_SET()  bfin_read16(PORTFIO_MASKB_SET)
+#define bfin_write_PORTFIO_MASKB_SET(val) bfin_write16(PORTFIO_MASKB_SET, val)
+#define bfin_read_PORTFIO_MASKB_TOGGLE() bfin_read16(PORTFIO_MASKB_TOGGLE)
+#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE, val)
+#define bfin_read_PORTFIO_DIR()        bfin_read16(PORTFIO_DIR)
+#define bfin_write_PORTFIO_DIR(val)    bfin_write16(PORTFIO_DIR, val)
+#define bfin_read_PORTFIO_POLAR()      bfin_read16(PORTFIO_POLAR)
+#define bfin_write_PORTFIO_POLAR(val)  bfin_write16(PORTFIO_POLAR, val)
+#define bfin_read_PORTFIO_EDGE()       bfin_read16(PORTFIO_EDGE)
+#define bfin_write_PORTFIO_EDGE(val)   bfin_write16(PORTFIO_EDGE, val)
+#define bfin_read_PORTFIO_BOTH()       bfin_read16(PORTFIO_BOTH)
+#define bfin_write_PORTFIO_BOTH(val)   bfin_write16(PORTFIO_BOTH, val)
+#define bfin_read_PORTFIO_INEN()       bfin_read16(PORTFIO_INEN)
+#define bfin_write_PORTFIO_INEN(val)   bfin_write16(PORTFIO_INEN, val)
+#define bfin_read_PORTCIO_FER()        bfin_read16(PORTCIO_FER)
+#define bfin_write_PORTCIO_FER(val)    bfin_write16(PORTCIO_FER, val)
+#define bfin_read_PORTCIO()            bfin_read16(PORTCIO)
+#define bfin_write_PORTCIO(val)        bfin_write16(PORTCIO, val)
+#define bfin_read_PORTCIO_CLEAR()      bfin_read16(PORTCIO_CLEAR)
+#define bfin_write_PORTCIO_CLEAR(val)  bfin_write16(PORTCIO_CLEAR, val)
+#define bfin_read_PORTCIO_SET()        bfin_read16(PORTCIO_SET)
+#define bfin_write_PORTCIO_SET(val)    bfin_write16(PORTCIO_SET, val)
+#define bfin_read_PORTCIO_TOGGLE()     bfin_read16(PORTCIO_TOGGLE)
+#define bfin_write_PORTCIO_TOGGLE(val) bfin_write16(PORTCIO_TOGGLE, val)
+#define bfin_read_PORTCIO_DIR()        bfin_read16(PORTCIO_DIR)
+#define bfin_write_PORTCIO_DIR(val)    bfin_write16(PORTCIO_DIR, val)
+#define bfin_read_PORTCIO_INEN()       bfin_read16(PORTCIO_INEN)
+#define bfin_write_PORTCIO_INEN(val)   bfin_write16(PORTCIO_INEN, val)
+#define bfin_read_PORTDIO_FER()        bfin_read16(PORTDIO_FER)
+#define bfin_write_PORTDIO_FER(val)    bfin_write16(PORTDIO_FER, val)
+#define bfin_read_PORTDIO()            bfin_read16(PORTDIO)
+#define bfin_write_PORTDIO(val)        bfin_write16(PORTDIO, val)
+#define bfin_read_PORTDIO_CLEAR()      bfin_read16(PORTDIO_CLEAR)
+#define bfin_write_PORTDIO_CLEAR(val)  bfin_write16(PORTDIO_CLEAR, val)
+#define bfin_read_PORTDIO_SET()        bfin_read16(PORTDIO_SET)
+#define bfin_write_PORTDIO_SET(val)    bfin_write16(PORTDIO_SET, val)
+#define bfin_read_PORTDIO_TOGGLE()     bfin_read16(PORTDIO_TOGGLE)
+#define bfin_write_PORTDIO_TOGGLE(val) bfin_write16(PORTDIO_TOGGLE, val)
+#define bfin_read_PORTDIO_DIR()        bfin_read16(PORTDIO_DIR)
+#define bfin_write_PORTDIO_DIR(val)    bfin_write16(PORTDIO_DIR, val)
+#define bfin_read_PORTDIO_INEN()       bfin_read16(PORTDIO_INEN)
+#define bfin_write_PORTDIO_INEN(val)   bfin_write16(PORTDIO_INEN, val)
+#define bfin_read_PORTEIO_FER()        bfin_read16(PORTEIO_FER)
+#define bfin_write_PORTEIO_FER(val)    bfin_write16(PORTEIO_FER, val)
+#define bfin_read_PORTEIO()            bfin_read16(PORTEIO)
+#define bfin_write_PORTEIO(val)        bfin_write16(PORTEIO, val)
+#define bfin_read_PORTEIO_CLEAR()      bfin_read16(PORTEIO_CLEAR)
+#define bfin_write_PORTEIO_CLEAR(val)  bfin_write16(PORTEIO_CLEAR, val)
+#define bfin_read_PORTEIO_SET()        bfin_read16(PORTEIO_SET)
+#define bfin_write_PORTEIO_SET(val)    bfin_write16(PORTEIO_SET, val)
+#define bfin_read_PORTEIO_TOGGLE()     bfin_read16(PORTEIO_TOGGLE)
+#define bfin_write_PORTEIO_TOGGLE(val) bfin_write16(PORTEIO_TOGGLE, val)
+#define bfin_read_PORTEIO_DIR()        bfin_read16(PORTEIO_DIR)
+#define bfin_write_PORTEIO_DIR(val)    bfin_write16(PORTEIO_DIR, val)
+#define bfin_read_PORTEIO_INEN()       bfin_read16(PORTEIO_INEN)
+#define bfin_write_PORTEIO_INEN(val)   bfin_write16(PORTEIO_INEN, val)
+#define bfin_read_EBIU_AMGCTL()        bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val)    bfin_write16(EBIU_AMGCTL, val)
+#define bfin_read_EBIU_AMBCTL0()       bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val)   bfin_write32(EBIU_AMBCTL0, val)
+#define bfin_read_EBIU_AMBCTL1()       bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val)   bfin_write32(EBIU_AMBCTL1, val)
+#define bfin_read_EBIU_SDGCTL()        bfin_read32(EBIU_SDGCTL)
+#define bfin_write_EBIU_SDGCTL(val)    bfin_write32(EBIU_SDGCTL, val)
+#define bfin_read_EBIU_SDBCTL()        bfin_read16(EBIU_SDBCTL)
+#define bfin_write_EBIU_SDBCTL(val)    bfin_write16(EBIU_SDBCTL, val)
+#define bfin_read_EBIU_SDRRC()         bfin_read16(EBIU_SDRRC)
+#define bfin_write_EBIU_SDRRC(val)     bfin_write16(EBIU_SDRRC, val)
+#define bfin_read_EBIU_SDSTAT()        bfin_read16(EBIU_SDSTAT)
+#define bfin_write_EBIU_SDSTAT(val)    bfin_write16(EBIU_SDSTAT, val)
+#define bfin_read_DMAC0_TC_PER()       bfin_read16(DMAC0_TC_PER)
+#define bfin_write_DMAC0_TC_PER(val)   bfin_write16(DMAC0_TC_PER, val)
+#define bfin_read_DMAC0_TC_CNT()       bfin_read16(DMAC0_TC_CNT)
+#define bfin_write_DMAC0_TC_CNT(val)   bfin_write16(DMAC0_TC_CNT, val)
+#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_readPTR(DMA0_NEXT_DESC_PTR)
+#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_writePTR(DMA0_NEXT_DESC_PTR, val)
+#define bfin_read_DMA0_START_ADDR()    bfin_readPTR(DMA0_START_ADDR)
+#define bfin_write_DMA0_START_ADDR(val) bfin_writePTR(DMA0_START_ADDR, val)
+#define bfin_read_DMA0_CONFIG()        bfin_read16(DMA0_CONFIG)
+#define bfin_write_DMA0_CONFIG(val)    bfin_write16(DMA0_CONFIG, val)
+#define bfin_read_DMA0_X_COUNT()       bfin_read16(DMA0_X_COUNT)
+#define bfin_write_DMA0_X_COUNT(val)   bfin_write16(DMA0_X_COUNT, val)
+#define bfin_read_DMA0_X_MODIFY()      bfin_read16(DMA0_X_MODIFY)
+#define bfin_write_DMA0_X_MODIFY(val)  bfin_write16(DMA0_X_MODIFY, val)
+#define bfin_read_DMA0_Y_COUNT()       bfin_read16(DMA0_Y_COUNT)
+#define bfin_write_DMA0_Y_COUNT(val)   bfin_write16(DMA0_Y_COUNT, val)
+#define bfin_read_DMA0_Y_MODIFY()      bfin_read16(DMA0_Y_MODIFY)
+#define bfin_write_DMA0_Y_MODIFY(val)  bfin_write16(DMA0_Y_MODIFY, val)
+#define bfin_read_DMA0_CURR_DESC_PTR() bfin_readPTR(DMA0_CURR_DESC_PTR)
+#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_writePTR(DMA0_CURR_DESC_PTR, val)
+#define bfin_read_DMA0_CURR_ADDR()     bfin_readPTR(DMA0_CURR_ADDR)
+#define bfin_write_DMA0_CURR_ADDR(val) bfin_writePTR(DMA0_CURR_ADDR, val)
+#define bfin_read_DMA0_IRQ_STATUS()    bfin_read16(DMA0_IRQ_STATUS)
+#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS, val)
+#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP)
+#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP, val)
+#define bfin_read_DMA0_CURR_X_COUNT()  bfin_read16(DMA0_CURR_X_COUNT)
+#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT, val)
+#define bfin_read_DMA0_CURR_Y_COUNT()  bfin_read16(DMA0_CURR_Y_COUNT)
+#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT, val)
+#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_readPTR(DMA1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_writePTR(DMA1_NEXT_DESC_PTR, val)
+#define bfin_read_DMA1_START_ADDR()    bfin_readPTR(DMA1_START_ADDR)
+#define bfin_write_DMA1_START_ADDR(val) bfin_writePTR(DMA1_START_ADDR, val)
+#define bfin_read_DMA1_CONFIG()        bfin_read16(DMA1_CONFIG)
+#define bfin_write_DMA1_CONFIG(val)    bfin_write16(DMA1_CONFIG, val)
+#define bfin_read_DMA1_X_COUNT()       bfin_read16(DMA1_X_COUNT)
+#define bfin_write_DMA1_X_COUNT(val)   bfin_write16(DMA1_X_COUNT, val)
+#define bfin_read_DMA1_X_MODIFY()      bfin_read16(DMA1_X_MODIFY)
+#define bfin_write_DMA1_X_MODIFY(val)  bfin_write16(DMA1_X_MODIFY, val)
+#define bfin_read_DMA1_Y_COUNT()       bfin_read16(DMA1_Y_COUNT)
+#define bfin_write_DMA1_Y_COUNT(val)   bfin_write16(DMA1_Y_COUNT, val)
+#define bfin_read_DMA1_Y_MODIFY()      bfin_read16(DMA1_Y_MODIFY)
+#define bfin_write_DMA1_Y_MODIFY(val)  bfin_write16(DMA1_Y_MODIFY, val)
+#define bfin_read_DMA1_CURR_DESC_PTR() bfin_readPTR(DMA1_CURR_DESC_PTR)
+#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_writePTR(DMA1_CURR_DESC_PTR, val)
+#define bfin_read_DMA1_CURR_ADDR()     bfin_readPTR(DMA1_CURR_ADDR)
+#define bfin_write_DMA1_CURR_ADDR(val) bfin_writePTR(DMA1_CURR_ADDR, val)
+#define bfin_read_DMA1_IRQ_STATUS()    bfin_read16(DMA1_IRQ_STATUS)
+#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS, val)
+#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP, val)
+#define bfin_read_DMA1_CURR_X_COUNT()  bfin_read16(DMA1_CURR_X_COUNT)
+#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT, val)
+#define bfin_read_DMA1_CURR_Y_COUNT()  bfin_read16(DMA1_CURR_Y_COUNT)
+#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT, val)
+#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_readPTR(DMA2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_writePTR(DMA2_NEXT_DESC_PTR, val)
+#define bfin_read_DMA2_START_ADDR()    bfin_readPTR(DMA2_START_ADDR)
+#define bfin_write_DMA2_START_ADDR(val) bfin_writePTR(DMA2_START_ADDR, val)
+#define bfin_read_DMA2_CONFIG()        bfin_read16(DMA2_CONFIG)
+#define bfin_write_DMA2_CONFIG(val)    bfin_write16(DMA2_CONFIG, val)
+#define bfin_read_DMA2_X_COUNT()       bfin_read16(DMA2_X_COUNT)
+#define bfin_write_DMA2_X_COUNT(val)   bfin_write16(DMA2_X_COUNT, val)
+#define bfin_read_DMA2_X_MODIFY()      bfin_read16(DMA2_X_MODIFY)
+#define bfin_write_DMA2_X_MODIFY(val)  bfin_write16(DMA2_X_MODIFY, val)
+#define bfin_read_DMA2_Y_COUNT()       bfin_read16(DMA2_Y_COUNT)
+#define bfin_write_DMA2_Y_COUNT(val)   bfin_write16(DMA2_Y_COUNT, val)
+#define bfin_read_DMA2_Y_MODIFY()      bfin_read16(DMA2_Y_MODIFY)
+#define bfin_write_DMA2_Y_MODIFY(val)  bfin_write16(DMA2_Y_MODIFY, val)
+#define bfin_read_DMA2_CURR_DESC_PTR() bfin_readPTR(DMA2_CURR_DESC_PTR)
+#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_writePTR(DMA2_CURR_DESC_PTR, val)
+#define bfin_read_DMA2_CURR_ADDR()     bfin_readPTR(DMA2_CURR_ADDR)
+#define bfin_write_DMA2_CURR_ADDR(val) bfin_writePTR(DMA2_CURR_ADDR, val)
+#define bfin_read_DMA2_IRQ_STATUS()    bfin_read16(DMA2_IRQ_STATUS)
+#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS, val)
+#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP, val)
+#define bfin_read_DMA2_CURR_X_COUNT()  bfin_read16(DMA2_CURR_X_COUNT)
+#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT, val)
+#define bfin_read_DMA2_CURR_Y_COUNT()  bfin_read16(DMA2_CURR_Y_COUNT)
+#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT, val)
+#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_readPTR(DMA3_NEXT_DESC_PTR)
+#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_writePTR(DMA3_NEXT_DESC_PTR, val)
+#define bfin_read_DMA3_START_ADDR()    bfin_readPTR(DMA3_START_ADDR)
+#define bfin_write_DMA3_START_ADDR(val) bfin_writePTR(DMA3_START_ADDR, val)
+#define bfin_read_DMA3_CONFIG()        bfin_read16(DMA3_CONFIG)
+#define bfin_write_DMA3_CONFIG(val)    bfin_write16(DMA3_CONFIG, val)
+#define bfin_read_DMA3_X_COUNT()       bfin_read16(DMA3_X_COUNT)
+#define bfin_write_DMA3_X_COUNT(val)   bfin_write16(DMA3_X_COUNT, val)
+#define bfin_read_DMA3_X_MODIFY()      bfin_read16(DMA3_X_MODIFY)
+#define bfin_write_DMA3_X_MODIFY(val)  bfin_write16(DMA3_X_MODIFY, val)
+#define bfin_read_DMA3_Y_COUNT()       bfin_read16(DMA3_Y_COUNT)
+#define bfin_write_DMA3_Y_COUNT(val)   bfin_write16(DMA3_Y_COUNT, val)
+#define bfin_read_DMA3_Y_MODIFY()      bfin_read16(DMA3_Y_MODIFY)
+#define bfin_write_DMA3_Y_MODIFY(val)  bfin_write16(DMA3_Y_MODIFY, val)
+#define bfin_read_DMA3_CURR_DESC_PTR() bfin_readPTR(DMA3_CURR_DESC_PTR)
+#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_writePTR(DMA3_CURR_DESC_PTR, val)
+#define bfin_read_DMA3_CURR_ADDR()     bfin_readPTR(DMA3_CURR_ADDR)
+#define bfin_write_DMA3_CURR_ADDR(val) bfin_writePTR(DMA3_CURR_ADDR, val)
+#define bfin_read_DMA3_IRQ_STATUS()    bfin_read16(DMA3_IRQ_STATUS)
+#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS, val)
+#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP)
+#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP, val)
+#define bfin_read_DMA3_CURR_X_COUNT()  bfin_read16(DMA3_CURR_X_COUNT)
+#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT, val)
+#define bfin_read_DMA3_CURR_Y_COUNT()  bfin_read16(DMA3_CURR_Y_COUNT)
+#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT, val)
+#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_readPTR(DMA4_NEXT_DESC_PTR)
+#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_writePTR(DMA4_NEXT_DESC_PTR, val)
+#define bfin_read_DMA4_START_ADDR()    bfin_readPTR(DMA4_START_ADDR)
+#define bfin_write_DMA4_START_ADDR(val) bfin_writePTR(DMA4_START_ADDR, val)
+#define bfin_read_DMA4_CONFIG()        bfin_read16(DMA4_CONFIG)
+#define bfin_write_DMA4_CONFIG(val)    bfin_write16(DMA4_CONFIG, val)
+#define bfin_read_DMA4_X_COUNT()       bfin_read16(DMA4_X_COUNT)
+#define bfin_write_DMA4_X_COUNT(val)   bfin_write16(DMA4_X_COUNT, val)
+#define bfin_read_DMA4_X_MODIFY()      bfin_read16(DMA4_X_MODIFY)
+#define bfin_write_DMA4_X_MODIFY(val)  bfin_write16(DMA4_X_MODIFY, val)
+#define bfin_read_DMA4_Y_COUNT()       bfin_read16(DMA4_Y_COUNT)
+#define bfin_write_DMA4_Y_COUNT(val)   bfin_write16(DMA4_Y_COUNT, val)
+#define bfin_read_DMA4_Y_MODIFY()      bfin_read16(DMA4_Y_MODIFY)
+#define bfin_write_DMA4_Y_MODIFY(val)  bfin_write16(DMA4_Y_MODIFY, val)
+#define bfin_read_DMA4_CURR_DESC_PTR() bfin_readPTR(DMA4_CURR_DESC_PTR)
+#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_writePTR(DMA4_CURR_DESC_PTR, val)
+#define bfin_read_DMA4_CURR_ADDR()     bfin_readPTR(DMA4_CURR_ADDR)
+#define bfin_write_DMA4_CURR_ADDR(val) bfin_writePTR(DMA4_CURR_ADDR, val)
+#define bfin_read_DMA4_IRQ_STATUS()    bfin_read16(DMA4_IRQ_STATUS)
+#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS, val)
+#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP)
+#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP, val)
+#define bfin_read_DMA4_CURR_X_COUNT()  bfin_read16(DMA4_CURR_X_COUNT)
+#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT, val)
+#define bfin_read_DMA4_CURR_Y_COUNT()  bfin_read16(DMA4_CURR_Y_COUNT)
+#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT, val)
+#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_readPTR(DMA5_NEXT_DESC_PTR)
+#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_writePTR(DMA5_NEXT_DESC_PTR, val)
+#define bfin_read_DMA5_START_ADDR()    bfin_readPTR(DMA5_START_ADDR)
+#define bfin_write_DMA5_START_ADDR(val) bfin_writePTR(DMA5_START_ADDR, val)
+#define bfin_read_DMA5_CONFIG()        bfin_read16(DMA5_CONFIG)
+#define bfin_write_DMA5_CONFIG(val)    bfin_write16(DMA5_CONFIG, val)
+#define bfin_read_DMA5_X_COUNT()       bfin_read16(DMA5_X_COUNT)
+#define bfin_write_DMA5_X_COUNT(val)   bfin_write16(DMA5_X_COUNT, val)
+#define bfin_read_DMA5_X_MODIFY()      bfin_read16(DMA5_X_MODIFY)
+#define bfin_write_DMA5_X_MODIFY(val)  bfin_write16(DMA5_X_MODIFY, val)
+#define bfin_read_DMA5_Y_COUNT()       bfin_read16(DMA5_Y_COUNT)
+#define bfin_write_DMA5_Y_COUNT(val)   bfin_write16(DMA5_Y_COUNT, val)
+#define bfin_read_DMA5_Y_MODIFY()      bfin_read16(DMA5_Y_MODIFY)
+#define bfin_write_DMA5_Y_MODIFY(val)  bfin_write16(DMA5_Y_MODIFY, val)
+#define bfin_read_DMA5_CURR_DESC_PTR() bfin_readPTR(DMA5_CURR_DESC_PTR)
+#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_writePTR(DMA5_CURR_DESC_PTR, val)
+#define bfin_read_DMA5_CURR_ADDR()     bfin_readPTR(DMA5_CURR_ADDR)
+#define bfin_write_DMA5_CURR_ADDR(val) bfin_writePTR(DMA5_CURR_ADDR, val)
+#define bfin_read_DMA5_IRQ_STATUS()    bfin_read16(DMA5_IRQ_STATUS)
+#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS, val)
+#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP)
+#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP, val)
+#define bfin_read_DMA5_CURR_X_COUNT()  bfin_read16(DMA5_CURR_X_COUNT)
+#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT, val)
+#define bfin_read_DMA5_CURR_Y_COUNT()  bfin_read16(DMA5_CURR_Y_COUNT)
+#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT, val)
+#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_readPTR(DMA6_NEXT_DESC_PTR)
+#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_writePTR(DMA6_NEXT_DESC_PTR, val)
+#define bfin_read_DMA6_START_ADDR()    bfin_readPTR(DMA6_START_ADDR)
+#define bfin_write_DMA6_START_ADDR(val) bfin_writePTR(DMA6_START_ADDR, val)
+#define bfin_read_DMA6_CONFIG()        bfin_read16(DMA6_CONFIG)
+#define bfin_write_DMA6_CONFIG(val)    bfin_write16(DMA6_CONFIG, val)
+#define bfin_read_DMA6_X_COUNT()       bfin_read16(DMA6_X_COUNT)
+#define bfin_write_DMA6_X_COUNT(val)   bfin_write16(DMA6_X_COUNT, val)
+#define bfin_read_DMA6_X_MODIFY()      bfin_read16(DMA6_X_MODIFY)
+#define bfin_write_DMA6_X_MODIFY(val)  bfin_write16(DMA6_X_MODIFY, val)
+#define bfin_read_DMA6_Y_COUNT()       bfin_read16(DMA6_Y_COUNT)
+#define bfin_write_DMA6_Y_COUNT(val)   bfin_write16(DMA6_Y_COUNT, val)
+#define bfin_read_DMA6_Y_MODIFY()      bfin_read16(DMA6_Y_MODIFY)
+#define bfin_write_DMA6_Y_MODIFY(val)  bfin_write16(DMA6_Y_MODIFY, val)
+#define bfin_read_DMA6_CURR_DESC_PTR() bfin_readPTR(DMA6_CURR_DESC_PTR)
+#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_writePTR(DMA6_CURR_DESC_PTR, val)
+#define bfin_read_DMA6_CURR_ADDR()     bfin_readPTR(DMA6_CURR_ADDR)
+#define bfin_write_DMA6_CURR_ADDR(val) bfin_writePTR(DMA6_CURR_ADDR, val)
+#define bfin_read_DMA6_IRQ_STATUS()    bfin_read16(DMA6_IRQ_STATUS)
+#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS, val)
+#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP)
+#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP, val)
+#define bfin_read_DMA6_CURR_X_COUNT()  bfin_read16(DMA6_CURR_X_COUNT)
+#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT, val)
+#define bfin_read_DMA6_CURR_Y_COUNT()  bfin_read16(DMA6_CURR_Y_COUNT)
+#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT, val)
+#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_readPTR(DMA7_NEXT_DESC_PTR)
+#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_writePTR(DMA7_NEXT_DESC_PTR, val)
+#define bfin_read_DMA7_START_ADDR()    bfin_readPTR(DMA7_START_ADDR)
+#define bfin_write_DMA7_START_ADDR(val) bfin_writePTR(DMA7_START_ADDR, val)
+#define bfin_read_DMA7_CONFIG()        bfin_read16(DMA7_CONFIG)
+#define bfin_write_DMA7_CONFIG(val)    bfin_write16(DMA7_CONFIG, val)
+#define bfin_read_DMA7_X_COUNT()       bfin_read16(DMA7_X_COUNT)
+#define bfin_write_DMA7_X_COUNT(val)   bfin_write16(DMA7_X_COUNT, val)
+#define bfin_read_DMA7_X_MODIFY()      bfin_read16(DMA7_X_MODIFY)
+#define bfin_write_DMA7_X_MODIFY(val)  bfin_write16(DMA7_X_MODIFY, val)
+#define bfin_read_DMA7_Y_COUNT()       bfin_read16(DMA7_Y_COUNT)
+#define bfin_write_DMA7_Y_COUNT(val)   bfin_write16(DMA7_Y_COUNT, val)
+#define bfin_read_DMA7_Y_MODIFY()      bfin_read16(DMA7_Y_MODIFY)
+#define bfin_write_DMA7_Y_MODIFY(val)  bfin_write16(DMA7_Y_MODIFY, val)
+#define bfin_read_DMA7_CURR_DESC_PTR() bfin_readPTR(DMA7_CURR_DESC_PTR)
+#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_writePTR(DMA7_CURR_DESC_PTR, val)
+#define bfin_read_DMA7_CURR_ADDR()     bfin_readPTR(DMA7_CURR_ADDR)
+#define bfin_write_DMA7_CURR_ADDR(val) bfin_writePTR(DMA7_CURR_ADDR, val)
+#define bfin_read_DMA7_IRQ_STATUS()    bfin_read16(DMA7_IRQ_STATUS)
+#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS, val)
+#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP)
+#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP, val)
+#define bfin_read_DMA7_CURR_X_COUNT()  bfin_read16(DMA7_CURR_X_COUNT)
+#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT, val)
+#define bfin_read_DMA7_CURR_Y_COUNT()  bfin_read16(DMA7_CURR_Y_COUNT)
+#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT, val)
+#define bfin_read_DMAC1_TC_PER()       bfin_read16(DMAC1_TC_PER)
+#define bfin_write_DMAC1_TC_PER(val)   bfin_write16(DMAC1_TC_PER, val)
+#define bfin_read_DMAC1_TC_CNT()       bfin_read16(DMAC1_TC_CNT)
+#define bfin_write_DMAC1_TC_CNT(val)   bfin_write16(DMAC1_TC_CNT, val)
+#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_readPTR(DMA8_NEXT_DESC_PTR)
+#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_writePTR(DMA8_NEXT_DESC_PTR, val)
+#define bfin_read_DMA8_START_ADDR()    bfin_readPTR(DMA8_START_ADDR)
+#define bfin_write_DMA8_START_ADDR(val) bfin_writePTR(DMA8_START_ADDR, val)
+#define bfin_read_DMA8_CONFIG()        bfin_read16(DMA8_CONFIG)
+#define bfin_write_DMA8_CONFIG(val)    bfin_write16(DMA8_CONFIG, val)
+#define bfin_read_DMA8_X_COUNT()       bfin_read16(DMA8_X_COUNT)
+#define bfin_write_DMA8_X_COUNT(val)   bfin_write16(DMA8_X_COUNT, val)
+#define bfin_read_DMA8_X_MODIFY()      bfin_read16(DMA8_X_MODIFY)
+#define bfin_write_DMA8_X_MODIFY(val)  bfin_write16(DMA8_X_MODIFY, val)
+#define bfin_read_DMA8_Y_COUNT()       bfin_read16(DMA8_Y_COUNT)
+#define bfin_write_DMA8_Y_COUNT(val)   bfin_write16(DMA8_Y_COUNT, val)
+#define bfin_read_DMA8_Y_MODIFY()      bfin_read16(DMA8_Y_MODIFY)
+#define bfin_write_DMA8_Y_MODIFY(val)  bfin_write16(DMA8_Y_MODIFY, val)
+#define bfin_read_DMA8_CURR_DESC_PTR() bfin_readPTR(DMA8_CURR_DESC_PTR)
+#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_writePTR(DMA8_CURR_DESC_PTR, val)
+#define bfin_read_DMA8_CURR_ADDR()     bfin_readPTR(DMA8_CURR_ADDR)
+#define bfin_write_DMA8_CURR_ADDR(val) bfin_writePTR(DMA8_CURR_ADDR, val)
+#define bfin_read_DMA8_IRQ_STATUS()    bfin_read16(DMA8_IRQ_STATUS)
+#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS, val)
+#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP)
+#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP, val)
+#define bfin_read_DMA8_CURR_X_COUNT()  bfin_read16(DMA8_CURR_X_COUNT)
+#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT, val)
+#define bfin_read_DMA8_CURR_Y_COUNT()  bfin_read16(DMA8_CURR_Y_COUNT)
+#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT, val)
+#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_readPTR(DMA9_NEXT_DESC_PTR)
+#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_writePTR(DMA9_NEXT_DESC_PTR, val)
+#define bfin_read_DMA9_START_ADDR()    bfin_readPTR(DMA9_START_ADDR)
+#define bfin_write_DMA9_START_ADDR(val) bfin_writePTR(DMA9_START_ADDR, val)
+#define bfin_read_DMA9_CONFIG()        bfin_read16(DMA9_CONFIG)
+#define bfin_write_DMA9_CONFIG(val)    bfin_write16(DMA9_CONFIG, val)
+#define bfin_read_DMA9_X_COUNT()       bfin_read16(DMA9_X_COUNT)
+#define bfin_write_DMA9_X_COUNT(val)   bfin_write16(DMA9_X_COUNT, val)
+#define bfin_read_DMA9_X_MODIFY()      bfin_read16(DMA9_X_MODIFY)
+#define bfin_write_DMA9_X_MODIFY(val)  bfin_write16(DMA9_X_MODIFY, val)
+#define bfin_read_DMA9_Y_COUNT()       bfin_read16(DMA9_Y_COUNT)
+#define bfin_write_DMA9_Y_COUNT(val)   bfin_write16(DMA9_Y_COUNT, val)
+#define bfin_read_DMA9_Y_MODIFY()      bfin_read16(DMA9_Y_MODIFY)
+#define bfin_write_DMA9_Y_MODIFY(val)  bfin_write16(DMA9_Y_MODIFY, val)
+#define bfin_read_DMA9_CURR_DESC_PTR() bfin_readPTR(DMA9_CURR_DESC_PTR)
+#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_writePTR(DMA9_CURR_DESC_PTR, val)
+#define bfin_read_DMA9_CURR_ADDR()     bfin_readPTR(DMA9_CURR_ADDR)
+#define bfin_write_DMA9_CURR_ADDR(val) bfin_writePTR(DMA9_CURR_ADDR, val)
+#define bfin_read_DMA9_IRQ_STATUS()    bfin_read16(DMA9_IRQ_STATUS)
+#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS, val)
+#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP)
+#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP, val)
+#define bfin_read_DMA9_CURR_X_COUNT()  bfin_read16(DMA9_CURR_X_COUNT)
+#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT, val)
+#define bfin_read_DMA9_CURR_Y_COUNT()  bfin_read16(DMA9_CURR_Y_COUNT)
+#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT, val)
+#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_readPTR(DMA10_NEXT_DESC_PTR)
+#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_writePTR(DMA10_NEXT_DESC_PTR, val)
+#define bfin_read_DMA10_START_ADDR()   bfin_readPTR(DMA10_START_ADDR)
+#define bfin_write_DMA10_START_ADDR(val) bfin_writePTR(DMA10_START_ADDR, val)
+#define bfin_read_DMA10_CONFIG()       bfin_read16(DMA10_CONFIG)
+#define bfin_write_DMA10_CONFIG(val)   bfin_write16(DMA10_CONFIG, val)
+#define bfin_read_DMA10_X_COUNT()      bfin_read16(DMA10_X_COUNT)
+#define bfin_write_DMA10_X_COUNT(val)  bfin_write16(DMA10_X_COUNT, val)
+#define bfin_read_DMA10_X_MODIFY()     bfin_read16(DMA10_X_MODIFY)
+#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY, val)
+#define bfin_read_DMA10_Y_COUNT()      bfin_read16(DMA10_Y_COUNT)
+#define bfin_write_DMA10_Y_COUNT(val)  bfin_write16(DMA10_Y_COUNT, val)
+#define bfin_read_DMA10_Y_MODIFY()     bfin_read16(DMA10_Y_MODIFY)
+#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY, val)
+#define bfin_read_DMA10_CURR_DESC_PTR() bfin_readPTR(DMA10_CURR_DESC_PTR)
+#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_writePTR(DMA10_CURR_DESC_PTR, val)
+#define bfin_read_DMA10_CURR_ADDR()    bfin_readPTR(DMA10_CURR_ADDR)
+#define bfin_write_DMA10_CURR_ADDR(val) bfin_writePTR(DMA10_CURR_ADDR, val)
+#define bfin_read_DMA10_IRQ_STATUS()   bfin_read16(DMA10_IRQ_STATUS)
+#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS, val)
+#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP)
+#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP, val)
+#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT)
+#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT, val)
+#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT)
+#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT, val)
+#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_readPTR(DMA11_NEXT_DESC_PTR)
+#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_writePTR(DMA11_NEXT_DESC_PTR, val)
+#define bfin_read_DMA11_START_ADDR()   bfin_readPTR(DMA11_START_ADDR)
+#define bfin_write_DMA11_START_ADDR(val) bfin_writePTR(DMA11_START_ADDR, val)
+#define bfin_read_DMA11_CONFIG()       bfin_read16(DMA11_CONFIG)
+#define bfin_write_DMA11_CONFIG(val)   bfin_write16(DMA11_CONFIG, val)
+#define bfin_read_DMA11_X_COUNT()      bfin_read16(DMA11_X_COUNT)
+#define bfin_write_DMA11_X_COUNT(val)  bfin_write16(DMA11_X_COUNT, val)
+#define bfin_read_DMA11_X_MODIFY()     bfin_read16(DMA11_X_MODIFY)
+#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY, val)
+#define bfin_read_DMA11_Y_COUNT()      bfin_read16(DMA11_Y_COUNT)
+#define bfin_write_DMA11_Y_COUNT(val)  bfin_write16(DMA11_Y_COUNT, val)
+#define bfin_read_DMA11_Y_MODIFY()     bfin_read16(DMA11_Y_MODIFY)
+#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY, val)
+#define bfin_read_DMA11_CURR_DESC_PTR() bfin_readPTR(DMA11_CURR_DESC_PTR)
+#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_writePTR(DMA11_CURR_DESC_PTR, val)
+#define bfin_read_DMA11_CURR_ADDR()    bfin_readPTR(DMA11_CURR_ADDR)
+#define bfin_write_DMA11_CURR_ADDR(val) bfin_writePTR(DMA11_CURR_ADDR, val)
+#define bfin_read_DMA11_IRQ_STATUS()   bfin_read16(DMA11_IRQ_STATUS)
+#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS, val)
+#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP)
+#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP, val)
+#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT)
+#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT, val)
+#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT)
+#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT, val)
+#define bfin_read_DMA12_NEXT_DESC_PTR() bfin_readPTR(DMA12_NEXT_DESC_PTR)
+#define bfin_write_DMA12_NEXT_DESC_PTR(val) bfin_writePTR(DMA12_NEXT_DESC_PTR, val)
+#define bfin_read_DMA12_START_ADDR()   bfin_readPTR(DMA12_START_ADDR)
+#define bfin_write_DMA12_START_ADDR(val) bfin_writePTR(DMA12_START_ADDR, val)
+#define bfin_read_DMA12_CONFIG()       bfin_read16(DMA12_CONFIG)
+#define bfin_write_DMA12_CONFIG(val)   bfin_write16(DMA12_CONFIG, val)
+#define bfin_read_DMA12_X_COUNT()      bfin_read16(DMA12_X_COUNT)
+#define bfin_write_DMA12_X_COUNT(val)  bfin_write16(DMA12_X_COUNT, val)
+#define bfin_read_DMA12_X_MODIFY()     bfin_read16(DMA12_X_MODIFY)
+#define bfin_write_DMA12_X_MODIFY(val) bfin_write16(DMA12_X_MODIFY, val)
+#define bfin_read_DMA12_Y_COUNT()      bfin_read16(DMA12_Y_COUNT)
+#define bfin_write_DMA12_Y_COUNT(val)  bfin_write16(DMA12_Y_COUNT, val)
+#define bfin_read_DMA12_Y_MODIFY()     bfin_read16(DMA12_Y_MODIFY)
+#define bfin_write_DMA12_Y_MODIFY(val) bfin_write16(DMA12_Y_MODIFY, val)
+#define bfin_read_DMA12_CURR_DESC_PTR() bfin_readPTR(DMA12_CURR_DESC_PTR)
+#define bfin_write_DMA12_CURR_DESC_PTR(val) bfin_writePTR(DMA12_CURR_DESC_PTR, val)
+#define bfin_read_DMA12_CURR_ADDR()    bfin_readPTR(DMA12_CURR_ADDR)
+#define bfin_write_DMA12_CURR_ADDR(val) bfin_writePTR(DMA12_CURR_ADDR, val)
+#define bfin_read_DMA12_IRQ_STATUS()   bfin_read16(DMA12_IRQ_STATUS)
+#define bfin_write_DMA12_IRQ_STATUS(val) bfin_write16(DMA12_IRQ_STATUS, val)
+#define bfin_read_DMA12_PERIPHERAL_MAP() bfin_read16(DMA12_PERIPHERAL_MAP)
+#define bfin_write_DMA12_PERIPHERAL_MAP(val) bfin_write16(DMA12_PERIPHERAL_MAP, val)
+#define bfin_read_DMA12_CURR_X_COUNT() bfin_read16(DMA12_CURR_X_COUNT)
+#define bfin_write_DMA12_CURR_X_COUNT(val) bfin_write16(DMA12_CURR_X_COUNT, val)
+#define bfin_read_DMA12_CURR_Y_COUNT() bfin_read16(DMA12_CURR_Y_COUNT)
+#define bfin_write_DMA12_CURR_Y_COUNT(val) bfin_write16(DMA12_CURR_Y_COUNT, val)
+#define bfin_read_DMA13_NEXT_DESC_PTR() bfin_readPTR(DMA13_NEXT_DESC_PTR)
+#define bfin_write_DMA13_NEXT_DESC_PTR(val) bfin_writePTR(DMA13_NEXT_DESC_PTR, val)
+#define bfin_read_DMA13_START_ADDR()   bfin_readPTR(DMA13_START_ADDR)
+#define bfin_write_DMA13_START_ADDR(val) bfin_writePTR(DMA13_START_ADDR, val)
+#define bfin_read_DMA13_CONFIG()       bfin_read16(DMA13_CONFIG)
+#define bfin_write_DMA13_CONFIG(val)   bfin_write16(DMA13_CONFIG, val)
+#define bfin_read_DMA13_X_COUNT()      bfin_read16(DMA13_X_COUNT)
+#define bfin_write_DMA13_X_COUNT(val)  bfin_write16(DMA13_X_COUNT, val)
+#define bfin_read_DMA13_X_MODIFY()     bfin_read16(DMA13_X_MODIFY)
+#define bfin_write_DMA13_X_MODIFY(val) bfin_write16(DMA13_X_MODIFY, val)
+#define bfin_read_DMA13_Y_COUNT()      bfin_read16(DMA13_Y_COUNT)
+#define bfin_write_DMA13_Y_COUNT(val)  bfin_write16(DMA13_Y_COUNT, val)
+#define bfin_read_DMA13_Y_MODIFY()     bfin_read16(DMA13_Y_MODIFY)
+#define bfin_write_DMA13_Y_MODIFY(val) bfin_write16(DMA13_Y_MODIFY, val)
+#define bfin_read_DMA13_CURR_DESC_PTR() bfin_readPTR(DMA13_CURR_DESC_PTR)
+#define bfin_write_DMA13_CURR_DESC_PTR(val) bfin_writePTR(DMA13_CURR_DESC_PTR, val)
+#define bfin_read_DMA13_CURR_ADDR()    bfin_readPTR(DMA13_CURR_ADDR)
+#define bfin_write_DMA13_CURR_ADDR(val) bfin_writePTR(DMA13_CURR_ADDR, val)
+#define bfin_read_DMA13_IRQ_STATUS()   bfin_read16(DMA13_IRQ_STATUS)
+#define bfin_write_DMA13_IRQ_STATUS(val) bfin_write16(DMA13_IRQ_STATUS, val)
+#define bfin_read_DMA13_PERIPHERAL_MAP() bfin_read16(DMA13_PERIPHERAL_MAP)
+#define bfin_write_DMA13_PERIPHERAL_MAP(val) bfin_write16(DMA13_PERIPHERAL_MAP, val)
+#define bfin_read_DMA13_CURR_X_COUNT() bfin_read16(DMA13_CURR_X_COUNT)
+#define bfin_write_DMA13_CURR_X_COUNT(val) bfin_write16(DMA13_CURR_X_COUNT, val)
+#define bfin_read_DMA13_CURR_Y_COUNT() bfin_read16(DMA13_CURR_Y_COUNT)
+#define bfin_write_DMA13_CURR_Y_COUNT(val) bfin_write16(DMA13_CURR_Y_COUNT, val)
+#define bfin_read_DMA14_NEXT_DESC_PTR() bfin_readPTR(DMA14_NEXT_DESC_PTR)
+#define bfin_write_DMA14_NEXT_DESC_PTR(val) bfin_writePTR(DMA14_NEXT_DESC_PTR, val)
+#define bfin_read_DMA14_START_ADDR()   bfin_readPTR(DMA14_START_ADDR)
+#define bfin_write_DMA14_START_ADDR(val) bfin_writePTR(DMA14_START_ADDR, val)
+#define bfin_read_DMA14_CONFIG()       bfin_read16(DMA14_CONFIG)
+#define bfin_write_DMA14_CONFIG(val)   bfin_write16(DMA14_CONFIG, val)
+#define bfin_read_DMA14_X_COUNT()      bfin_read16(DMA14_X_COUNT)
+#define bfin_write_DMA14_X_COUNT(val)  bfin_write16(DMA14_X_COUNT, val)
+#define bfin_read_DMA14_X_MODIFY()     bfin_read16(DMA14_X_MODIFY)
+#define bfin_write_DMA14_X_MODIFY(val) bfin_write16(DMA14_X_MODIFY, val)
+#define bfin_read_DMA14_Y_COUNT()      bfin_read16(DMA14_Y_COUNT)
+#define bfin_write_DMA14_Y_COUNT(val)  bfin_write16(DMA14_Y_COUNT, val)
+#define bfin_read_DMA14_Y_MODIFY()     bfin_read16(DMA14_Y_MODIFY)
+#define bfin_write_DMA14_Y_MODIFY(val) bfin_write16(DMA14_Y_MODIFY, val)
+#define bfin_read_DMA14_CURR_DESC_PTR() bfin_readPTR(DMA14_CURR_DESC_PTR)
+#define bfin_write_DMA14_CURR_DESC_PTR(val) bfin_writePTR(DMA14_CURR_DESC_PTR, val)
+#define bfin_read_DMA14_CURR_ADDR()    bfin_readPTR(DMA14_CURR_ADDR)
+#define bfin_write_DMA14_CURR_ADDR(val) bfin_writePTR(DMA14_CURR_ADDR, val)
+#define bfin_read_DMA14_IRQ_STATUS()   bfin_read16(DMA14_IRQ_STATUS)
+#define bfin_write_DMA14_IRQ_STATUS(val) bfin_write16(DMA14_IRQ_STATUS, val)
+#define bfin_read_DMA14_PERIPHERAL_MAP() bfin_read16(DMA14_PERIPHERAL_MAP)
+#define bfin_write_DMA14_PERIPHERAL_MAP(val) bfin_write16(DMA14_PERIPHERAL_MAP, val)
+#define bfin_read_DMA14_CURR_X_COUNT() bfin_read16(DMA14_CURR_X_COUNT)
+#define bfin_write_DMA14_CURR_X_COUNT(val) bfin_write16(DMA14_CURR_X_COUNT, val)
+#define bfin_read_DMA14_CURR_Y_COUNT() bfin_read16(DMA14_CURR_Y_COUNT)
+#define bfin_write_DMA14_CURR_Y_COUNT(val) bfin_write16(DMA14_CURR_Y_COUNT, val)
+#define bfin_read_DMA15_NEXT_DESC_PTR() bfin_readPTR(DMA15_NEXT_DESC_PTR)
+#define bfin_write_DMA15_NEXT_DESC_PTR(val) bfin_writePTR(DMA15_NEXT_DESC_PTR, val)
+#define bfin_read_DMA15_START_ADDR()   bfin_readPTR(DMA15_START_ADDR)
+#define bfin_write_DMA15_START_ADDR(val) bfin_writePTR(DMA15_START_ADDR, val)
+#define bfin_read_DMA15_CONFIG()       bfin_read16(DMA15_CONFIG)
+#define bfin_write_DMA15_CONFIG(val)   bfin_write16(DMA15_CONFIG, val)
+#define bfin_read_DMA15_X_COUNT()      bfin_read16(DMA15_X_COUNT)
+#define bfin_write_DMA15_X_COUNT(val)  bfin_write16(DMA15_X_COUNT, val)
+#define bfin_read_DMA15_X_MODIFY()     bfin_read16(DMA15_X_MODIFY)
+#define bfin_write_DMA15_X_MODIFY(val) bfin_write16(DMA15_X_MODIFY, val)
+#define bfin_read_DMA15_Y_COUNT()      bfin_read16(DMA15_Y_COUNT)
+#define bfin_write_DMA15_Y_COUNT(val)  bfin_write16(DMA15_Y_COUNT, val)
+#define bfin_read_DMA15_Y_MODIFY()     bfin_read16(DMA15_Y_MODIFY)
+#define bfin_write_DMA15_Y_MODIFY(val) bfin_write16(DMA15_Y_MODIFY, val)
+#define bfin_read_DMA15_CURR_DESC_PTR() bfin_readPTR(DMA15_CURR_DESC_PTR)
+#define bfin_write_DMA15_CURR_DESC_PTR(val) bfin_writePTR(DMA15_CURR_DESC_PTR, val)
+#define bfin_read_DMA15_CURR_ADDR()    bfin_readPTR(DMA15_CURR_ADDR)
+#define bfin_write_DMA15_CURR_ADDR(val) bfin_writePTR(DMA15_CURR_ADDR, val)
+#define bfin_read_DMA15_IRQ_STATUS()   bfin_read16(DMA15_IRQ_STATUS)
+#define bfin_write_DMA15_IRQ_STATUS(val) bfin_write16(DMA15_IRQ_STATUS, val)
+#define bfin_read_DMA15_PERIPHERAL_MAP() bfin_read16(DMA15_PERIPHERAL_MAP)
+#define bfin_write_DMA15_PERIPHERAL_MAP(val) bfin_write16(DMA15_PERIPHERAL_MAP, val)
+#define bfin_read_DMA15_CURR_X_COUNT() bfin_read16(DMA15_CURR_X_COUNT)
+#define bfin_write_DMA15_CURR_X_COUNT(val) bfin_write16(DMA15_CURR_X_COUNT, val)
+#define bfin_read_DMA15_CURR_Y_COUNT() bfin_read16(DMA15_CURR_Y_COUNT)
+#define bfin_write_DMA15_CURR_Y_COUNT(val) bfin_write16(DMA15_CURR_Y_COUNT, val)
+#define bfin_read_DMA16_NEXT_DESC_PTR() bfin_readPTR(DMA16_NEXT_DESC_PTR)
+#define bfin_write_DMA16_NEXT_DESC_PTR(val) bfin_writePTR(DMA16_NEXT_DESC_PTR, val)
+#define bfin_read_DMA16_START_ADDR()   bfin_readPTR(DMA16_START_ADDR)
+#define bfin_write_DMA16_START_ADDR(val) bfin_writePTR(DMA16_START_ADDR, val)
+#define bfin_read_DMA16_CONFIG()       bfin_read16(DMA16_CONFIG)
+#define bfin_write_DMA16_CONFIG(val)   bfin_write16(DMA16_CONFIG, val)
+#define bfin_read_DMA16_X_COUNT()      bfin_read16(DMA16_X_COUNT)
+#define bfin_write_DMA16_X_COUNT(val)  bfin_write16(DMA16_X_COUNT, val)
+#define bfin_read_DMA16_X_MODIFY()     bfin_read16(DMA16_X_MODIFY)
+#define bfin_write_DMA16_X_MODIFY(val) bfin_write16(DMA16_X_MODIFY, val)
+#define bfin_read_DMA16_Y_COUNT()      bfin_read16(DMA16_Y_COUNT)
+#define bfin_write_DMA16_Y_COUNT(val)  bfin_write16(DMA16_Y_COUNT, val)
+#define bfin_read_DMA16_Y_MODIFY()     bfin_read16(DMA16_Y_MODIFY)
+#define bfin_write_DMA16_Y_MODIFY(val) bfin_write16(DMA16_Y_MODIFY, val)
+#define bfin_read_DMA16_CURR_DESC_PTR() bfin_readPTR(DMA16_CURR_DESC_PTR)
+#define bfin_write_DMA16_CURR_DESC_PTR(val) bfin_writePTR(DMA16_CURR_DESC_PTR, val)
+#define bfin_read_DMA16_CURR_ADDR()    bfin_readPTR(DMA16_CURR_ADDR)
+#define bfin_write_DMA16_CURR_ADDR(val) bfin_writePTR(DMA16_CURR_ADDR, val)
+#define bfin_read_DMA16_IRQ_STATUS()   bfin_read16(DMA16_IRQ_STATUS)
+#define bfin_write_DMA16_IRQ_STATUS(val) bfin_write16(DMA16_IRQ_STATUS, val)
+#define bfin_read_DMA16_PERIPHERAL_MAP() bfin_read16(DMA16_PERIPHERAL_MAP)
+#define bfin_write_DMA16_PERIPHERAL_MAP(val) bfin_write16(DMA16_PERIPHERAL_MAP, val)
+#define bfin_read_DMA16_CURR_X_COUNT() bfin_read16(DMA16_CURR_X_COUNT)
+#define bfin_write_DMA16_CURR_X_COUNT(val) bfin_write16(DMA16_CURR_X_COUNT, val)
+#define bfin_read_DMA16_CURR_Y_COUNT() bfin_read16(DMA16_CURR_Y_COUNT)
+#define bfin_write_DMA16_CURR_Y_COUNT(val) bfin_write16(DMA16_CURR_Y_COUNT, val)
+#define bfin_read_DMA17_NEXT_DESC_PTR() bfin_readPTR(DMA17_NEXT_DESC_PTR)
+#define bfin_write_DMA17_NEXT_DESC_PTR(val) bfin_writePTR(DMA17_NEXT_DESC_PTR, val)
+#define bfin_read_DMA17_START_ADDR()   bfin_readPTR(DMA17_START_ADDR)
+#define bfin_write_DMA17_START_ADDR(val) bfin_writePTR(DMA17_START_ADDR, val)
+#define bfin_read_DMA17_CONFIG()       bfin_read16(DMA17_CONFIG)
+#define bfin_write_DMA17_CONFIG(val)   bfin_write16(DMA17_CONFIG, val)
+#define bfin_read_DMA17_X_COUNT()      bfin_read16(DMA17_X_COUNT)
+#define bfin_write_DMA17_X_COUNT(val)  bfin_write16(DMA17_X_COUNT, val)
+#define bfin_read_DMA17_X_MODIFY()     bfin_read16(DMA17_X_MODIFY)
+#define bfin_write_DMA17_X_MODIFY(val) bfin_write16(DMA17_X_MODIFY, val)
+#define bfin_read_DMA17_Y_COUNT()      bfin_read16(DMA17_Y_COUNT)
+#define bfin_write_DMA17_Y_COUNT(val)  bfin_write16(DMA17_Y_COUNT, val)
+#define bfin_read_DMA17_Y_MODIFY()     bfin_read16(DMA17_Y_MODIFY)
+#define bfin_write_DMA17_Y_MODIFY(val) bfin_write16(DMA17_Y_MODIFY, val)
+#define bfin_read_DMA17_CURR_DESC_PTR() bfin_readPTR(DMA17_CURR_DESC_PTR)
+#define bfin_write_DMA17_CURR_DESC_PTR(val) bfin_writePTR(DMA17_CURR_DESC_PTR, val)
+#define bfin_read_DMA17_CURR_ADDR()    bfin_readPTR(DMA17_CURR_ADDR)
+#define bfin_write_DMA17_CURR_ADDR(val) bfin_writePTR(DMA17_CURR_ADDR, val)
+#define bfin_read_DMA17_IRQ_STATUS()   bfin_read16(DMA17_IRQ_STATUS)
+#define bfin_write_DMA17_IRQ_STATUS(val) bfin_write16(DMA17_IRQ_STATUS, val)
+#define bfin_read_DMA17_PERIPHERAL_MAP() bfin_read16(DMA17_PERIPHERAL_MAP)
+#define bfin_write_DMA17_PERIPHERAL_MAP(val) bfin_write16(DMA17_PERIPHERAL_MAP, val)
+#define bfin_read_DMA17_CURR_X_COUNT() bfin_read16(DMA17_CURR_X_COUNT)
+#define bfin_write_DMA17_CURR_X_COUNT(val) bfin_write16(DMA17_CURR_X_COUNT, val)
+#define bfin_read_DMA17_CURR_Y_COUNT() bfin_read16(DMA17_CURR_Y_COUNT)
+#define bfin_write_DMA17_CURR_Y_COUNT(val) bfin_write16(DMA17_CURR_Y_COUNT, val)
+#define bfin_read_DMA18_NEXT_DESC_PTR() bfin_readPTR(DMA18_NEXT_DESC_PTR)
+#define bfin_write_DMA18_NEXT_DESC_PTR(val) bfin_writePTR(DMA18_NEXT_DESC_PTR, val)
+#define bfin_read_DMA18_START_ADDR()   bfin_readPTR(DMA18_START_ADDR)
+#define bfin_write_DMA18_START_ADDR(val) bfin_writePTR(DMA18_START_ADDR, val)
+#define bfin_read_DMA18_CONFIG()       bfin_read16(DMA18_CONFIG)
+#define bfin_write_DMA18_CONFIG(val)   bfin_write16(DMA18_CONFIG, val)
+#define bfin_read_DMA18_X_COUNT()      bfin_read16(DMA18_X_COUNT)
+#define bfin_write_DMA18_X_COUNT(val)  bfin_write16(DMA18_X_COUNT, val)
+#define bfin_read_DMA18_X_MODIFY()     bfin_read16(DMA18_X_MODIFY)
+#define bfin_write_DMA18_X_MODIFY(val) bfin_write16(DMA18_X_MODIFY, val)
+#define bfin_read_DMA18_Y_COUNT()      bfin_read16(DMA18_Y_COUNT)
+#define bfin_write_DMA18_Y_COUNT(val)  bfin_write16(DMA18_Y_COUNT, val)
+#define bfin_read_DMA18_Y_MODIFY()     bfin_read16(DMA18_Y_MODIFY)
+#define bfin_write_DMA18_Y_MODIFY(val) bfin_write16(DMA18_Y_MODIFY, val)
+#define bfin_read_DMA18_CURR_DESC_PTR() bfin_readPTR(DMA18_CURR_DESC_PTR)
+#define bfin_write_DMA18_CURR_DESC_PTR(val) bfin_writePTR(DMA18_CURR_DESC_PTR, val)
+#define bfin_read_DMA18_CURR_ADDR()    bfin_readPTR(DMA18_CURR_ADDR)
+#define bfin_write_DMA18_CURR_ADDR(val) bfin_writePTR(DMA18_CURR_ADDR, val)
+#define bfin_read_DMA18_IRQ_STATUS()   bfin_read16(DMA18_IRQ_STATUS)
+#define bfin_write_DMA18_IRQ_STATUS(val) bfin_write16(DMA18_IRQ_STATUS, val)
+#define bfin_read_DMA18_PERIPHERAL_MAP() bfin_read16(DMA18_PERIPHERAL_MAP)
+#define bfin_write_DMA18_PERIPHERAL_MAP(val) bfin_write16(DMA18_PERIPHERAL_MAP, val)
+#define bfin_read_DMA18_CURR_X_COUNT() bfin_read16(DMA18_CURR_X_COUNT)
+#define bfin_write_DMA18_CURR_X_COUNT(val) bfin_write16(DMA18_CURR_X_COUNT, val)
+#define bfin_read_DMA18_CURR_Y_COUNT() bfin_read16(DMA18_CURR_Y_COUNT)
+#define bfin_write_DMA18_CURR_Y_COUNT(val) bfin_write16(DMA18_CURR_Y_COUNT, val)
+#define bfin_read_DMA19_NEXT_DESC_PTR() bfin_readPTR(DMA19_NEXT_DESC_PTR)
+#define bfin_write_DMA19_NEXT_DESC_PTR(val) bfin_writePTR(DMA19_NEXT_DESC_PTR, val)
+#define bfin_read_DMA19_START_ADDR()   bfin_readPTR(DMA19_START_ADDR)
+#define bfin_write_DMA19_START_ADDR(val) bfin_writePTR(DMA19_START_ADDR, val)
+#define bfin_read_DMA19_CONFIG()       bfin_read16(DMA19_CONFIG)
+#define bfin_write_DMA19_CONFIG(val)   bfin_write16(DMA19_CONFIG, val)
+#define bfin_read_DMA19_X_COUNT()      bfin_read16(DMA19_X_COUNT)
+#define bfin_write_DMA19_X_COUNT(val)  bfin_write16(DMA19_X_COUNT, val)
+#define bfin_read_DMA19_X_MODIFY()     bfin_read16(DMA19_X_MODIFY)
+#define bfin_write_DMA19_X_MODIFY(val) bfin_write16(DMA19_X_MODIFY, val)
+#define bfin_read_DMA19_Y_COUNT()      bfin_read16(DMA19_Y_COUNT)
+#define bfin_write_DMA19_Y_COUNT(val)  bfin_write16(DMA19_Y_COUNT, val)
+#define bfin_read_DMA19_Y_MODIFY()     bfin_read16(DMA19_Y_MODIFY)
+#define bfin_write_DMA19_Y_MODIFY(val) bfin_write16(DMA19_Y_MODIFY, val)
+#define bfin_read_DMA19_CURR_DESC_PTR() bfin_readPTR(DMA19_CURR_DESC_PTR)
+#define bfin_write_DMA19_CURR_DESC_PTR(val) bfin_writePTR(DMA19_CURR_DESC_PTR, val)
+#define bfin_read_DMA19_CURR_ADDR()    bfin_readPTR(DMA19_CURR_ADDR)
+#define bfin_write_DMA19_CURR_ADDR(val) bfin_writePTR(DMA19_CURR_ADDR, val)
+#define bfin_read_DMA19_IRQ_STATUS()   bfin_read16(DMA19_IRQ_STATUS)
+#define bfin_write_DMA19_IRQ_STATUS(val) bfin_write16(DMA19_IRQ_STATUS, val)
+#define bfin_read_DMA19_PERIPHERAL_MAP() bfin_read16(DMA19_PERIPHERAL_MAP)
+#define bfin_write_DMA19_PERIPHERAL_MAP(val) bfin_write16(DMA19_PERIPHERAL_MAP, val)
+#define bfin_read_DMA19_CURR_X_COUNT() bfin_read16(DMA19_CURR_X_COUNT)
+#define bfin_write_DMA19_CURR_X_COUNT(val) bfin_write16(DMA19_CURR_X_COUNT, val)
+#define bfin_read_DMA19_CURR_Y_COUNT() bfin_read16(DMA19_CURR_Y_COUNT)
+#define bfin_write_DMA19_CURR_Y_COUNT(val) bfin_write16(DMA19_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_readPTR(MDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_D0_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D0_START_ADDR() bfin_readPTR(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val) bfin_writePTR(MDMA_D0_START_ADDR, val)
+#define bfin_read_MDMA_D0_CONFIG()    bfin_read16(MDMA_D0_CONFIG)
+#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG, val)
+#define bfin_read_MDMA_D0_X_COUNT()   bfin_read16(MDMA_D0_X_COUNT)
+#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT, val)
+#define bfin_read_MDMA_D0_X_MODIFY()  bfin_read16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY, val)
+#define bfin_read_MDMA_D0_Y_COUNT()   bfin_read16(MDMA_D0_Y_COUNT)
+#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT, val)
+#define bfin_read_MDMA_D0_Y_MODIFY()  bfin_read16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY, val)
+#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_readPTR(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_writePTR(MDMA_D0_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D0_CURR_ADDR() bfin_readPTR(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_writePTR(MDMA_D0_CURR_ADDR, val)
+#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS)
+#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS, val)
+#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT)
+#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_readPTR(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_S0_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S0_START_ADDR() bfin_readPTR(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val) bfin_writePTR(MDMA_S0_START_ADDR, val)
+#define bfin_read_MDMA_S0_CONFIG()    bfin_read16(MDMA_S0_CONFIG)
+#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG, val)
+#define bfin_read_MDMA_S0_X_COUNT()   bfin_read16(MDMA_S0_X_COUNT)
+#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT, val)
+#define bfin_read_MDMA_S0_X_MODIFY()  bfin_read16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY, val)
+#define bfin_read_MDMA_S0_Y_COUNT()   bfin_read16(MDMA_S0_Y_COUNT)
+#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT, val)
+#define bfin_read_MDMA_S0_Y_MODIFY()  bfin_read16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY, val)
+#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_readPTR(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_writePTR(MDMA_S0_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S0_CURR_ADDR() bfin_readPTR(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_writePTR(MDMA_S0_CURR_ADDR, val)
+#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS)
+#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS, val)
+#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT)
+#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_readPTR(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_D1_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D1_START_ADDR() bfin_readPTR(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val) bfin_writePTR(MDMA_D1_START_ADDR, val)
+#define bfin_read_MDMA_D1_CONFIG()    bfin_read16(MDMA_D1_CONFIG)
+#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG, val)
+#define bfin_read_MDMA_D1_X_COUNT()   bfin_read16(MDMA_D1_X_COUNT)
+#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT, val)
+#define bfin_read_MDMA_D1_X_MODIFY()  bfin_read16(MDMA_D1_X_MODIFY)
+#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY, val)
+#define bfin_read_MDMA_D1_Y_COUNT()   bfin_read16(MDMA_D1_Y_COUNT)
+#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT, val)
+#define bfin_read_MDMA_D1_Y_MODIFY()  bfin_read16(MDMA_D1_Y_MODIFY)
+#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY, val)
+#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_readPTR(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_writePTR(MDMA_D1_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D1_CURR_ADDR() bfin_readPTR(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_writePTR(MDMA_D1_CURR_ADDR, val)
+#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS)
+#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS, val)
+#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT)
+#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_readPTR(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_S1_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S1_START_ADDR() bfin_readPTR(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val) bfin_writePTR(MDMA_S1_START_ADDR, val)
+#define bfin_read_MDMA_S1_CONFIG()    bfin_read16(MDMA_S1_CONFIG)
+#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG, val)
+#define bfin_read_MDMA_S1_X_COUNT()   bfin_read16(MDMA_S1_X_COUNT)
+#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT, val)
+#define bfin_read_MDMA_S1_X_MODIFY()  bfin_read16(MDMA_S1_X_MODIFY)
+#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY, val)
+#define bfin_read_MDMA_S1_Y_COUNT()   bfin_read16(MDMA_S1_Y_COUNT)
+#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT, val)
+#define bfin_read_MDMA_S1_Y_MODIFY()  bfin_read16(MDMA_S1_Y_MODIFY)
+#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY, val)
+#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_readPTR(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_writePTR(MDMA_S1_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S1_CURR_ADDR() bfin_readPTR(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_writePTR(MDMA_S1_CURR_ADDR, val)
+#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS)
+#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS, val)
+#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT)
+#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_D2_NEXT_DESC_PTR() bfin_readPTR(MDMA_D2_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D2_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_D2_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D2_START_ADDR() bfin_readPTR(MDMA_D2_START_ADDR)
+#define bfin_write_MDMA_D2_START_ADDR(val) bfin_writePTR(MDMA_D2_START_ADDR, val)
+#define bfin_read_MDMA_D2_CONFIG()    bfin_read16(MDMA_D2_CONFIG)
+#define bfin_write_MDMA_D2_CONFIG(val) bfin_write16(MDMA_D2_CONFIG, val)
+#define bfin_read_MDMA_D2_X_COUNT()   bfin_read16(MDMA_D2_X_COUNT)
+#define bfin_write_MDMA_D2_X_COUNT(val) bfin_write16(MDMA_D2_X_COUNT, val)
+#define bfin_read_MDMA_D2_X_MODIFY()  bfin_read16(MDMA_D2_X_MODIFY)
+#define bfin_write_MDMA_D2_X_MODIFY(val) bfin_write16(MDMA_D2_X_MODIFY, val)
+#define bfin_read_MDMA_D2_Y_COUNT()   bfin_read16(MDMA_D2_Y_COUNT)
+#define bfin_write_MDMA_D2_Y_COUNT(val) bfin_write16(MDMA_D2_Y_COUNT, val)
+#define bfin_read_MDMA_D2_Y_MODIFY()  bfin_read16(MDMA_D2_Y_MODIFY)
+#define bfin_write_MDMA_D2_Y_MODIFY(val) bfin_write16(MDMA_D2_Y_MODIFY, val)
+#define bfin_read_MDMA_D2_CURR_DESC_PTR() bfin_readPTR(MDMA_D2_CURR_DESC_PTR)
+#define bfin_write_MDMA_D2_CURR_DESC_PTR(val) bfin_writePTR(MDMA_D2_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D2_CURR_ADDR() bfin_readPTR(MDMA_D2_CURR_ADDR)
+#define bfin_write_MDMA_D2_CURR_ADDR(val) bfin_writePTR(MDMA_D2_CURR_ADDR, val)
+#define bfin_read_MDMA_D2_IRQ_STATUS() bfin_read16(MDMA_D2_IRQ_STATUS)
+#define bfin_write_MDMA_D2_IRQ_STATUS(val) bfin_write16(MDMA_D2_IRQ_STATUS, val)
+#define bfin_read_MDMA_D2_PERIPHERAL_MAP() bfin_read16(MDMA_D2_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D2_PERIPHERAL_MAP(val) bfin_write16(MDMA_D2_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_D2_CURR_X_COUNT() bfin_read16(MDMA_D2_CURR_X_COUNT)
+#define bfin_write_MDMA_D2_CURR_X_COUNT(val) bfin_write16(MDMA_D2_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D2_CURR_Y_COUNT() bfin_read16(MDMA_D2_CURR_Y_COUNT)
+#define bfin_write_MDMA_D2_CURR_Y_COUNT(val) bfin_write16(MDMA_D2_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S2_NEXT_DESC_PTR() bfin_readPTR(MDMA_S2_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S2_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_S2_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S2_START_ADDR() bfin_readPTR(MDMA_S2_START_ADDR)
+#define bfin_write_MDMA_S2_START_ADDR(val) bfin_writePTR(MDMA_S2_START_ADDR, val)
+#define bfin_read_MDMA_S2_CONFIG()    bfin_read16(MDMA_S2_CONFIG)
+#define bfin_write_MDMA_S2_CONFIG(val) bfin_write16(MDMA_S2_CONFIG, val)
+#define bfin_read_MDMA_S2_X_COUNT()   bfin_read16(MDMA_S2_X_COUNT)
+#define bfin_write_MDMA_S2_X_COUNT(val) bfin_write16(MDMA_S2_X_COUNT, val)
+#define bfin_read_MDMA_S2_X_MODIFY()  bfin_read16(MDMA_S2_X_MODIFY)
+#define bfin_write_MDMA_S2_X_MODIFY(val) bfin_write16(MDMA_S2_X_MODIFY, val)
+#define bfin_read_MDMA_S2_Y_COUNT()   bfin_read16(MDMA_S2_Y_COUNT)
+#define bfin_write_MDMA_S2_Y_COUNT(val) bfin_write16(MDMA_S2_Y_COUNT, val)
+#define bfin_read_MDMA_S2_Y_MODIFY()  bfin_read16(MDMA_S2_Y_MODIFY)
+#define bfin_write_MDMA_S2_Y_MODIFY(val) bfin_write16(MDMA_S2_Y_MODIFY, val)
+#define bfin_read_MDMA_S2_CURR_DESC_PTR() bfin_readPTR(MDMA_S2_CURR_DESC_PTR)
+#define bfin_write_MDMA_S2_CURR_DESC_PTR(val) bfin_writePTR(MDMA_S2_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S2_CURR_ADDR() bfin_readPTR(MDMA_S2_CURR_ADDR)
+#define bfin_write_MDMA_S2_CURR_ADDR(val) bfin_writePTR(MDMA_S2_CURR_ADDR, val)
+#define bfin_read_MDMA_S2_IRQ_STATUS() bfin_read16(MDMA_S2_IRQ_STATUS)
+#define bfin_write_MDMA_S2_IRQ_STATUS(val) bfin_write16(MDMA_S2_IRQ_STATUS, val)
+#define bfin_read_MDMA_S2_PERIPHERAL_MAP() bfin_read16(MDMA_S2_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S2_PERIPHERAL_MAP(val) bfin_write16(MDMA_S2_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_S2_CURR_X_COUNT() bfin_read16(MDMA_S2_CURR_X_COUNT)
+#define bfin_write_MDMA_S2_CURR_X_COUNT(val) bfin_write16(MDMA_S2_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S2_CURR_Y_COUNT() bfin_read16(MDMA_S2_CURR_Y_COUNT)
+#define bfin_write_MDMA_S2_CURR_Y_COUNT(val) bfin_write16(MDMA_S2_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_D3_NEXT_DESC_PTR() bfin_readPTR(MDMA_D3_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D3_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_D3_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D3_START_ADDR() bfin_readPTR(MDMA_D3_START_ADDR)
+#define bfin_write_MDMA_D3_START_ADDR(val) bfin_writePTR(MDMA_D3_START_ADDR, val)
+#define bfin_read_MDMA_D3_CONFIG()    bfin_read16(MDMA_D3_CONFIG)
+#define bfin_write_MDMA_D3_CONFIG(val) bfin_write16(MDMA_D3_CONFIG, val)
+#define bfin_read_MDMA_D3_X_COUNT()   bfin_read16(MDMA_D3_X_COUNT)
+#define bfin_write_MDMA_D3_X_COUNT(val) bfin_write16(MDMA_D3_X_COUNT, val)
+#define bfin_read_MDMA_D3_X_MODIFY()  bfin_read16(MDMA_D3_X_MODIFY)
+#define bfin_write_MDMA_D3_X_MODIFY(val) bfin_write16(MDMA_D3_X_MODIFY, val)
+#define bfin_read_MDMA_D3_Y_COUNT()   bfin_read16(MDMA_D3_Y_COUNT)
+#define bfin_write_MDMA_D3_Y_COUNT(val) bfin_write16(MDMA_D3_Y_COUNT, val)
+#define bfin_read_MDMA_D3_Y_MODIFY()  bfin_read16(MDMA_D3_Y_MODIFY)
+#define bfin_write_MDMA_D3_Y_MODIFY(val) bfin_write16(MDMA_D3_Y_MODIFY, val)
+#define bfin_read_MDMA_D3_CURR_DESC_PTR() bfin_readPTR(MDMA_D3_CURR_DESC_PTR)
+#define bfin_write_MDMA_D3_CURR_DESC_PTR(val) bfin_writePTR(MDMA_D3_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D3_CURR_ADDR() bfin_readPTR(MDMA_D3_CURR_ADDR)
+#define bfin_write_MDMA_D3_CURR_ADDR(val) bfin_writePTR(MDMA_D3_CURR_ADDR, val)
+#define bfin_read_MDMA_D3_IRQ_STATUS() bfin_read16(MDMA_D3_IRQ_STATUS)
+#define bfin_write_MDMA_D3_IRQ_STATUS(val) bfin_write16(MDMA_D3_IRQ_STATUS, val)
+#define bfin_read_MDMA_D3_PERIPHERAL_MAP() bfin_read16(MDMA_D3_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D3_PERIPHERAL_MAP(val) bfin_write16(MDMA_D3_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_D3_CURR_X_COUNT() bfin_read16(MDMA_D3_CURR_X_COUNT)
+#define bfin_write_MDMA_D3_CURR_X_COUNT(val) bfin_write16(MDMA_D3_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D3_CURR_Y_COUNT() bfin_read16(MDMA_D3_CURR_Y_COUNT)
+#define bfin_write_MDMA_D3_CURR_Y_COUNT(val) bfin_write16(MDMA_D3_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S3_NEXT_DESC_PTR() bfin_readPTR(MDMA_S3_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S3_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_S3_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S3_START_ADDR() bfin_readPTR(MDMA_S3_START_ADDR)
+#define bfin_write_MDMA_S3_START_ADDR(val) bfin_writePTR(MDMA_S3_START_ADDR, val)
+#define bfin_read_MDMA_S3_CONFIG()    bfin_read16(MDMA_S3_CONFIG)
+#define bfin_write_MDMA_S3_CONFIG(val) bfin_write16(MDMA_S3_CONFIG, val)
+#define bfin_read_MDMA_S3_X_COUNT()   bfin_read16(MDMA_S3_X_COUNT)
+#define bfin_write_MDMA_S3_X_COUNT(val) bfin_write16(MDMA_S3_X_COUNT, val)
+#define bfin_read_MDMA_S3_X_MODIFY()  bfin_read16(MDMA_S3_X_MODIFY)
+#define bfin_write_MDMA_S3_X_MODIFY(val) bfin_write16(MDMA_S3_X_MODIFY, val)
+#define bfin_read_MDMA_S3_Y_COUNT()   bfin_read16(MDMA_S3_Y_COUNT)
+#define bfin_write_MDMA_S3_Y_COUNT(val) bfin_write16(MDMA_S3_Y_COUNT, val)
+#define bfin_read_MDMA_S3_Y_MODIFY()  bfin_read16(MDMA_S3_Y_MODIFY)
+#define bfin_write_MDMA_S3_Y_MODIFY(val) bfin_write16(MDMA_S3_Y_MODIFY, val)
+#define bfin_read_MDMA_S3_CURR_DESC_PTR() bfin_readPTR(MDMA_S3_CURR_DESC_PTR)
+#define bfin_write_MDMA_S3_CURR_DESC_PTR(val) bfin_writePTR(MDMA_S3_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S3_CURR_ADDR() bfin_readPTR(MDMA_S3_CURR_ADDR)
+#define bfin_write_MDMA_S3_CURR_ADDR(val) bfin_writePTR(MDMA_S3_CURR_ADDR, val)
+#define bfin_read_MDMA_S3_IRQ_STATUS() bfin_read16(MDMA_S3_IRQ_STATUS)
+#define bfin_write_MDMA_S3_IRQ_STATUS(val) bfin_write16(MDMA_S3_IRQ_STATUS, val)
+#define bfin_read_MDMA_S3_PERIPHERAL_MAP() bfin_read16(MDMA_S3_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S3_PERIPHERAL_MAP(val) bfin_write16(MDMA_S3_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_S3_CURR_X_COUNT() bfin_read16(MDMA_S3_CURR_X_COUNT)
+#define bfin_write_MDMA_S3_CURR_X_COUNT(val) bfin_write16(MDMA_S3_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S3_CURR_Y_COUNT() bfin_read16(MDMA_S3_CURR_Y_COUNT)
+#define bfin_write_MDMA_S3_CURR_Y_COUNT(val) bfin_write16(MDMA_S3_CURR_Y_COUNT, val)
+#define bfin_read_PPI_CONTROL()        bfin_read16(PPI_CONTROL)
+#define bfin_write_PPI_CONTROL(val)    bfin_write16(PPI_CONTROL, val)
+#define bfin_read_PPI_STATUS()         bfin_read16(PPI_STATUS)
+#define bfin_write_PPI_STATUS(val)     bfin_write16(PPI_STATUS, val)
+#define bfin_clear_PPI_STATUS()        bfin_read_PPI_STATUS()
+#define bfin_read_PPI_DELAY()          bfin_read16(PPI_DELAY)
+#define bfin_write_PPI_DELAY(val)      bfin_write16(PPI_DELAY, val)
+#define bfin_read_PPI_COUNT()          bfin_read16(PPI_COUNT)
+#define bfin_write_PPI_COUNT(val)      bfin_write16(PPI_COUNT, val)
+#define bfin_read_PPI_FRAME()          bfin_read16(PPI_FRAME)
+#define bfin_write_PPI_FRAME(val)      bfin_write16(PPI_FRAME, val)
+#define bfin_read_CAN_MC1()            bfin_read16(CAN_MC1)
+#define bfin_write_CAN_MC1(val)        bfin_write16(CAN_MC1, val)
+#define bfin_read_CAN_MD1()            bfin_read16(CAN_MD1)
+#define bfin_write_CAN_MD1(val)        bfin_write16(CAN_MD1, val)
+#define bfin_read_CAN_TRS1()           bfin_read16(CAN_TRS1)
+#define bfin_write_CAN_TRS1(val)       bfin_write16(CAN_TRS1, val)
+#define bfin_read_CAN_TRR1()           bfin_read16(CAN_TRR1)
+#define bfin_write_CAN_TRR1(val)       bfin_write16(CAN_TRR1, val)
+#define bfin_read_CAN_TA1()            bfin_read16(CAN_TA1)
+#define bfin_write_CAN_TA1(val)        bfin_write16(CAN_TA1, val)
+#define bfin_read_CAN_AA1()            bfin_read16(CAN_AA1)
+#define bfin_write_CAN_AA1(val)        bfin_write16(CAN_AA1, val)
+#define bfin_read_CAN_RMP1()           bfin_read16(CAN_RMP1)
+#define bfin_write_CAN_RMP1(val)       bfin_write16(CAN_RMP1, val)
+#define bfin_read_CAN_RML1()           bfin_read16(CAN_RML1)
+#define bfin_write_CAN_RML1(val)       bfin_write16(CAN_RML1, val)
+#define bfin_read_CAN_MBTIF1()         bfin_read16(CAN_MBTIF1)
+#define bfin_write_CAN_MBTIF1(val)     bfin_write16(CAN_MBTIF1, val)
+#define bfin_read_CAN_MBRIF1()         bfin_read16(CAN_MBRIF1)
+#define bfin_write_CAN_MBRIF1(val)     bfin_write16(CAN_MBRIF1, val)
+#define bfin_read_CAN_MBIM1()          bfin_read16(CAN_MBIM1)
+#define bfin_write_CAN_MBIM1(val)      bfin_write16(CAN_MBIM1, val)
+#define bfin_read_CAN_RFH1()           bfin_read16(CAN_RFH1)
+#define bfin_write_CAN_RFH1(val)       bfin_write16(CAN_RFH1, val)
+#define bfin_read_CAN_OPSS1()          bfin_read16(CAN_OPSS1)
+#define bfin_write_CAN_OPSS1(val)      bfin_write16(CAN_OPSS1, val)
+#define bfin_read_CAN_MC2()            bfin_read16(CAN_MC2)
+#define bfin_write_CAN_MC2(val)        bfin_write16(CAN_MC2, val)
+#define bfin_read_CAN_MD2()            bfin_read16(CAN_MD2)
+#define bfin_write_CAN_MD2(val)        bfin_write16(CAN_MD2, val)
+#define bfin_read_CAN_TRS2()           bfin_read16(CAN_TRS2)
+#define bfin_write_CAN_TRS2(val)       bfin_write16(CAN_TRS2, val)
+#define bfin_read_CAN_TRR2()           bfin_read16(CAN_TRR2)
+#define bfin_write_CAN_TRR2(val)       bfin_write16(CAN_TRR2, val)
+#define bfin_read_CAN_TA2()            bfin_read16(CAN_TA2)
+#define bfin_write_CAN_TA2(val)        bfin_write16(CAN_TA2, val)
+#define bfin_read_CAN_AA2()            bfin_read16(CAN_AA2)
+#define bfin_write_CAN_AA2(val)        bfin_write16(CAN_AA2, val)
+#define bfin_read_CAN_RMP2()           bfin_read16(CAN_RMP2)
+#define bfin_write_CAN_RMP2(val)       bfin_write16(CAN_RMP2, val)
+#define bfin_read_CAN_RML2()           bfin_read16(CAN_RML2)
+#define bfin_write_CAN_RML2(val)       bfin_write16(CAN_RML2, val)
+#define bfin_read_CAN_MBTIF2()         bfin_read16(CAN_MBTIF2)
+#define bfin_write_CAN_MBTIF2(val)     bfin_write16(CAN_MBTIF2, val)
+#define bfin_read_CAN_MBRIF2()         bfin_read16(CAN_MBRIF2)
+#define bfin_write_CAN_MBRIF2(val)     bfin_write16(CAN_MBRIF2, val)
+#define bfin_read_CAN_MBIM2()          bfin_read16(CAN_MBIM2)
+#define bfin_write_CAN_MBIM2(val)      bfin_write16(CAN_MBIM2, val)
+#define bfin_read_CAN_RFH2()           bfin_read16(CAN_RFH2)
+#define bfin_write_CAN_RFH2(val)       bfin_write16(CAN_RFH2, val)
+#define bfin_read_CAN_OPSS2()          bfin_read16(CAN_OPSS2)
+#define bfin_write_CAN_OPSS2(val)      bfin_write16(CAN_OPSS2, val)
+#define bfin_read_CAN_CLOCK()          bfin_read16(CAN_CLOCK)
+#define bfin_write_CAN_CLOCK(val)      bfin_write16(CAN_CLOCK, val)
+#define bfin_read_CAN_TIMING()         bfin_read16(CAN_TIMING)
+#define bfin_write_CAN_TIMING(val)     bfin_write16(CAN_TIMING, val)
+#define bfin_read_CAN_DEBUG()          bfin_read16(CAN_DEBUG)
+#define bfin_write_CAN_DEBUG(val)      bfin_write16(CAN_DEBUG, val)
+#define bfin_read_CAN_STATUS()         bfin_read16(CAN_STATUS)
+#define bfin_write_CAN_STATUS(val)     bfin_write16(CAN_STATUS, val)
+#define bfin_read_CAN_CEC()            bfin_read16(CAN_CEC)
+#define bfin_write_CAN_CEC(val)        bfin_write16(CAN_CEC, val)
+#define bfin_read_CAN_GIS()            bfin_read16(CAN_GIS)
+#define bfin_write_CAN_GIS(val)        bfin_write16(CAN_GIS, val)
+#define bfin_read_CAN_GIM()            bfin_read16(CAN_GIM)
+#define bfin_write_CAN_GIM(val)        bfin_write16(CAN_GIM, val)
+#define bfin_read_CAN_GIF()            bfin_read16(CAN_GIF)
+#define bfin_write_CAN_GIF(val)        bfin_write16(CAN_GIF, val)
+#define bfin_read_CAN_CONTROL()        bfin_read16(CAN_CONTROL)
+#define bfin_write_CAN_CONTROL(val)    bfin_write16(CAN_CONTROL, val)
+#define bfin_read_CAN_INTR()           bfin_read16(CAN_INTR)
+#define bfin_write_CAN_INTR(val)       bfin_write16(CAN_INTR, val)
+#define bfin_read_CAN_VERSION()        bfin_read16(CAN_VERSION)
+#define bfin_write_CAN_VERSION(val)    bfin_write16(CAN_VERSION, val)
+#define bfin_read_CAN_MBTD()           bfin_read16(CAN_MBTD)
+#define bfin_write_CAN_MBTD(val)       bfin_write16(CAN_MBTD, val)
+#define bfin_read_CAN_EWR()            bfin_read16(CAN_EWR)
+#define bfin_write_CAN_EWR(val)        bfin_write16(CAN_EWR, val)
+#define bfin_read_CAN_ESR()            bfin_read16(CAN_ESR)
+#define bfin_write_CAN_ESR(val)        bfin_write16(CAN_ESR, val)
+#define bfin_read_CAN_UCREG()          bfin_read16(CAN_UCREG)
+#define bfin_write_CAN_UCREG(val)      bfin_write16(CAN_UCREG, val)
+#define bfin_read_CAN_UCCNT()          bfin_read16(CAN_UCCNT)
+#define bfin_write_CAN_UCCNT(val)      bfin_write16(CAN_UCCNT, val)
+#define bfin_read_CAN_UCRC()           bfin_read16(CAN_UCRC)
+#define bfin_write_CAN_UCRC(val)       bfin_write16(CAN_UCRC, val)
+#define bfin_read_CAN_UCCNF()          bfin_read16(CAN_UCCNF)
+#define bfin_write_CAN_UCCNF(val)      bfin_write16(CAN_UCCNF, val)
+#define bfin_read_CAN_VERSION2()       bfin_read16(CAN_VERSION2)
+#define bfin_write_CAN_VERSION2(val)   bfin_write16(CAN_VERSION2, val)
+#define bfin_read_CAN_AM00L()          bfin_read16(CAN_AM00L)
+#define bfin_write_CAN_AM00L(val)      bfin_write16(CAN_AM00L, val)
+#define bfin_read_CAN_AM00H()          bfin_read16(CAN_AM00H)
+#define bfin_write_CAN_AM00H(val)      bfin_write16(CAN_AM00H, val)
+#define bfin_read_CAN_AM01L()          bfin_read16(CAN_AM01L)
+#define bfin_write_CAN_AM01L(val)      bfin_write16(CAN_AM01L, val)
+#define bfin_read_CAN_AM01H()          bfin_read16(CAN_AM01H)
+#define bfin_write_CAN_AM01H(val)      bfin_write16(CAN_AM01H, val)
+#define bfin_read_CAN_AM02L()          bfin_read16(CAN_AM02L)
+#define bfin_write_CAN_AM02L(val)      bfin_write16(CAN_AM02L, val)
+#define bfin_read_CAN_AM02H()          bfin_read16(CAN_AM02H)
+#define bfin_write_CAN_AM02H(val)      bfin_write16(CAN_AM02H, val)
+#define bfin_read_CAN_AM03L()          bfin_read16(CAN_AM03L)
+#define bfin_write_CAN_AM03L(val)      bfin_write16(CAN_AM03L, val)
+#define bfin_read_CAN_AM03H()          bfin_read16(CAN_AM03H)
+#define bfin_write_CAN_AM03H(val)      bfin_write16(CAN_AM03H, val)
+#define bfin_read_CAN_AM04L()          bfin_read16(CAN_AM04L)
+#define bfin_write_CAN_AM04L(val)      bfin_write16(CAN_AM04L, val)
+#define bfin_read_CAN_AM04H()          bfin_read16(CAN_AM04H)
+#define bfin_write_CAN_AM04H(val)      bfin_write16(CAN_AM04H, val)
+#define bfin_read_CAN_AM05L()          bfin_read16(CAN_AM05L)
+#define bfin_write_CAN_AM05L(val)      bfin_write16(CAN_AM05L, val)
+#define bfin_read_CAN_AM05H()          bfin_read16(CAN_AM05H)
+#define bfin_write_CAN_AM05H(val)      bfin_write16(CAN_AM05H, val)
+#define bfin_read_CAN_AM06L()          bfin_read16(CAN_AM06L)
+#define bfin_write_CAN_AM06L(val)      bfin_write16(CAN_AM06L, val)
+#define bfin_read_CAN_AM06H()          bfin_read16(CAN_AM06H)
+#define bfin_write_CAN_AM06H(val)      bfin_write16(CAN_AM06H, val)
+#define bfin_read_CAN_AM07L()          bfin_read16(CAN_AM07L)
+#define bfin_write_CAN_AM07L(val)      bfin_write16(CAN_AM07L, val)
+#define bfin_read_CAN_AM07H()          bfin_read16(CAN_AM07H)
+#define bfin_write_CAN_AM07H(val)      bfin_write16(CAN_AM07H, val)
+#define bfin_read_CAN_AM08L()          bfin_read16(CAN_AM08L)
+#define bfin_write_CAN_AM08L(val)      bfin_write16(CAN_AM08L, val)
+#define bfin_read_CAN_AM08H()          bfin_read16(CAN_AM08H)
+#define bfin_write_CAN_AM08H(val)      bfin_write16(CAN_AM08H, val)
+#define bfin_read_CAN_AM09L()          bfin_read16(CAN_AM09L)
+#define bfin_write_CAN_AM09L(val)      bfin_write16(CAN_AM09L, val)
+#define bfin_read_CAN_AM09H()          bfin_read16(CAN_AM09H)
+#define bfin_write_CAN_AM09H(val)      bfin_write16(CAN_AM09H, val)
+#define bfin_read_CAN_AM10L()          bfin_read16(CAN_AM10L)
+#define bfin_write_CAN_AM10L(val)      bfin_write16(CAN_AM10L, val)
+#define bfin_read_CAN_AM10H()          bfin_read16(CAN_AM10H)
+#define bfin_write_CAN_AM10H(val)      bfin_write16(CAN_AM10H, val)
+#define bfin_read_CAN_AM11L()          bfin_read16(CAN_AM11L)
+#define bfin_write_CAN_AM11L(val)      bfin_write16(CAN_AM11L, val)
+#define bfin_read_CAN_AM11H()          bfin_read16(CAN_AM11H)
+#define bfin_write_CAN_AM11H(val)      bfin_write16(CAN_AM11H, val)
+#define bfin_read_CAN_AM12L()          bfin_read16(CAN_AM12L)
+#define bfin_write_CAN_AM12L(val)      bfin_write16(CAN_AM12L, val)
+#define bfin_read_CAN_AM12H()          bfin_read16(CAN_AM12H)
+#define bfin_write_CAN_AM12H(val)      bfin_write16(CAN_AM12H, val)
+#define bfin_read_CAN_AM13L()          bfin_read16(CAN_AM13L)
+#define bfin_write_CAN_AM13L(val)      bfin_write16(CAN_AM13L, val)
+#define bfin_read_CAN_AM13H()          bfin_read16(CAN_AM13H)
+#define bfin_write_CAN_AM13H(val)      bfin_write16(CAN_AM13H, val)
+#define bfin_read_CAN_AM14L()          bfin_read16(CAN_AM14L)
+#define bfin_write_CAN_AM14L(val)      bfin_write16(CAN_AM14L, val)
+#define bfin_read_CAN_AM14H()          bfin_read16(CAN_AM14H)
+#define bfin_write_CAN_AM14H(val)      bfin_write16(CAN_AM14H, val)
+#define bfin_read_CAN_AM15L()          bfin_read16(CAN_AM15L)
+#define bfin_write_CAN_AM15L(val)      bfin_write16(CAN_AM15L, val)
+#define bfin_read_CAN_AM15H()          bfin_read16(CAN_AM15H)
+#define bfin_write_CAN_AM15H(val)      bfin_write16(CAN_AM15H, val)
+#define bfin_read_CAN_AM16L()          bfin_read16(CAN_AM16L)
+#define bfin_write_CAN_AM16L(val)      bfin_write16(CAN_AM16L, val)
+#define bfin_read_CAN_AM16H()          bfin_read16(CAN_AM16H)
+#define bfin_write_CAN_AM16H(val)      bfin_write16(CAN_AM16H, val)
+#define bfin_read_CAN_AM17L()          bfin_read16(CAN_AM17L)
+#define bfin_write_CAN_AM17L(val)      bfin_write16(CAN_AM17L, val)
+#define bfin_read_CAN_AM17H()          bfin_read16(CAN_AM17H)
+#define bfin_write_CAN_AM17H(val)      bfin_write16(CAN_AM17H, val)
+#define bfin_read_CAN_AM18L()          bfin_read16(CAN_AM18L)
+#define bfin_write_CAN_AM18L(val)      bfin_write16(CAN_AM18L, val)
+#define bfin_read_CAN_AM18H()          bfin_read16(CAN_AM18H)
+#define bfin_write_CAN_AM18H(val)      bfin_write16(CAN_AM18H, val)
+#define bfin_read_CAN_AM19L()          bfin_read16(CAN_AM19L)
+#define bfin_write_CAN_AM19L(val)      bfin_write16(CAN_AM19L, val)
+#define bfin_read_CAN_AM19H()          bfin_read16(CAN_AM19H)
+#define bfin_write_CAN_AM19H(val)      bfin_write16(CAN_AM19H, val)
+#define bfin_read_CAN_AM20L()          bfin_read16(CAN_AM20L)
+#define bfin_write_CAN_AM20L(val)      bfin_write16(CAN_AM20L, val)
+#define bfin_read_CAN_AM20H()          bfin_read16(CAN_AM20H)
+#define bfin_write_CAN_AM20H(val)      bfin_write16(CAN_AM20H, val)
+#define bfin_read_CAN_AM21L()          bfin_read16(CAN_AM21L)
+#define bfin_write_CAN_AM21L(val)      bfin_write16(CAN_AM21L, val)
+#define bfin_read_CAN_AM21H()          bfin_read16(CAN_AM21H)
+#define bfin_write_CAN_AM21H(val)      bfin_write16(CAN_AM21H, val)
+#define bfin_read_CAN_AM22L()          bfin_read16(CAN_AM22L)
+#define bfin_write_CAN_AM22L(val)      bfin_write16(CAN_AM22L, val)
+#define bfin_read_CAN_AM22H()          bfin_read16(CAN_AM22H)
+#define bfin_write_CAN_AM22H(val)      bfin_write16(CAN_AM22H, val)
+#define bfin_read_CAN_AM23L()          bfin_read16(CAN_AM23L)
+#define bfin_write_CAN_AM23L(val)      bfin_write16(CAN_AM23L, val)
+#define bfin_read_CAN_AM23H()          bfin_read16(CAN_AM23H)
+#define bfin_write_CAN_AM23H(val)      bfin_write16(CAN_AM23H, val)
+#define bfin_read_CAN_AM24L()          bfin_read16(CAN_AM24L)
+#define bfin_write_CAN_AM24L(val)      bfin_write16(CAN_AM24L, val)
+#define bfin_read_CAN_AM24H()          bfin_read16(CAN_AM24H)
+#define bfin_write_CAN_AM24H(val)      bfin_write16(CAN_AM24H, val)
+#define bfin_read_CAN_AM25L()          bfin_read16(CAN_AM25L)
+#define bfin_write_CAN_AM25L(val)      bfin_write16(CAN_AM25L, val)
+#define bfin_read_CAN_AM25H()          bfin_read16(CAN_AM25H)
+#define bfin_write_CAN_AM25H(val)      bfin_write16(CAN_AM25H, val)
+#define bfin_read_CAN_AM26L()          bfin_read16(CAN_AM26L)
+#define bfin_write_CAN_AM26L(val)      bfin_write16(CAN_AM26L, val)
+#define bfin_read_CAN_AM26H()          bfin_read16(CAN_AM26H)
+#define bfin_write_CAN_AM26H(val)      bfin_write16(CAN_AM26H, val)
+#define bfin_read_CAN_AM27L()          bfin_read16(CAN_AM27L)
+#define bfin_write_CAN_AM27L(val)      bfin_write16(CAN_AM27L, val)
+#define bfin_read_CAN_AM27H()          bfin_read16(CAN_AM27H)
+#define bfin_write_CAN_AM27H(val)      bfin_write16(CAN_AM27H, val)
+#define bfin_read_CAN_AM28L()          bfin_read16(CAN_AM28L)
+#define bfin_write_CAN_AM28L(val)      bfin_write16(CAN_AM28L, val)
+#define bfin_read_CAN_AM28H()          bfin_read16(CAN_AM28H)
+#define bfin_write_CAN_AM28H(val)      bfin_write16(CAN_AM28H, val)
+#define bfin_read_CAN_AM29L()          bfin_read16(CAN_AM29L)
+#define bfin_write_CAN_AM29L(val)      bfin_write16(CAN_AM29L, val)
+#define bfin_read_CAN_AM29H()          bfin_read16(CAN_AM29H)
+#define bfin_write_CAN_AM29H(val)      bfin_write16(CAN_AM29H, val)
+#define bfin_read_CAN_AM30L()          bfin_read16(CAN_AM30L)
+#define bfin_write_CAN_AM30L(val)      bfin_write16(CAN_AM30L, val)
+#define bfin_read_CAN_AM30H()          bfin_read16(CAN_AM30H)
+#define bfin_write_CAN_AM30H(val)      bfin_write16(CAN_AM30H, val)
+#define bfin_read_CAN_AM31L()          bfin_read16(CAN_AM31L)
+#define bfin_write_CAN_AM31L(val)      bfin_write16(CAN_AM31L, val)
+#define bfin_read_CAN_AM31H()          bfin_read16(CAN_AM31H)
+#define bfin_write_CAN_AM31H(val)      bfin_write16(CAN_AM31H, val)
+#define bfin_read_CAN_MB00_DATA0()     bfin_read16(CAN_MB00_DATA0)
+#define bfin_write_CAN_MB00_DATA0(val) bfin_write16(CAN_MB00_DATA0, val)
+#define bfin_read_CAN_MB00_DATA1()     bfin_read16(CAN_MB00_DATA1)
+#define bfin_write_CAN_MB00_DATA1(val) bfin_write16(CAN_MB00_DATA1, val)
+#define bfin_read_CAN_MB00_DATA2()     bfin_read16(CAN_MB00_DATA2)
+#define bfin_write_CAN_MB00_DATA2(val) bfin_write16(CAN_MB00_DATA2, val)
+#define bfin_read_CAN_MB00_DATA3()     bfin_read16(CAN_MB00_DATA3)
+#define bfin_write_CAN_MB00_DATA3(val) bfin_write16(CAN_MB00_DATA3, val)
+#define bfin_read_CAN_MB00_LENGTH()    bfin_read16(CAN_MB00_LENGTH)
+#define bfin_write_CAN_MB00_LENGTH(val) bfin_write16(CAN_MB00_LENGTH, val)
+#define bfin_read_CAN_MB00_TIMESTAMP() bfin_read16(CAN_MB00_TIMESTAMP)
+#define bfin_write_CAN_MB00_TIMESTAMP(val) bfin_write16(CAN_MB00_TIMESTAMP, val)
+#define bfin_read_CAN_MB00_ID0()       bfin_read16(CAN_MB00_ID0)
+#define bfin_write_CAN_MB00_ID0(val)   bfin_write16(CAN_MB00_ID0, val)
+#define bfin_read_CAN_MB00_ID1()       bfin_read16(CAN_MB00_ID1)
+#define bfin_write_CAN_MB00_ID1(val)   bfin_write16(CAN_MB00_ID1, val)
+#define bfin_read_CAN_MB01_DATA0()     bfin_read16(CAN_MB01_DATA0)
+#define bfin_write_CAN_MB01_DATA0(val) bfin_write16(CAN_MB01_DATA0, val)
+#define bfin_read_CAN_MB01_DATA1()     bfin_read16(CAN_MB01_DATA1)
+#define bfin_write_CAN_MB01_DATA1(val) bfin_write16(CAN_MB01_DATA1, val)
+#define bfin_read_CAN_MB01_DATA2()     bfin_read16(CAN_MB01_DATA2)
+#define bfin_write_CAN_MB01_DATA2(val) bfin_write16(CAN_MB01_DATA2, val)
+#define bfin_read_CAN_MB01_DATA3()     bfin_read16(CAN_MB01_DATA3)
+#define bfin_write_CAN_MB01_DATA3(val) bfin_write16(CAN_MB01_DATA3, val)
+#define bfin_read_CAN_MB01_LENGTH()    bfin_read16(CAN_MB01_LENGTH)
+#define bfin_write_CAN_MB01_LENGTH(val) bfin_write16(CAN_MB01_LENGTH, val)
+#define bfin_read_CAN_MB01_TIMESTAMP() bfin_read16(CAN_MB01_TIMESTAMP)
+#define bfin_write_CAN_MB01_TIMESTAMP(val) bfin_write16(CAN_MB01_TIMESTAMP, val)
+#define bfin_read_CAN_MB01_ID0()       bfin_read16(CAN_MB01_ID0)
+#define bfin_write_CAN_MB01_ID0(val)   bfin_write16(CAN_MB01_ID0, val)
+#define bfin_read_CAN_MB01_ID1()       bfin_read16(CAN_MB01_ID1)
+#define bfin_write_CAN_MB01_ID1(val)   bfin_write16(CAN_MB01_ID1, val)
+#define bfin_read_CAN_MB02_DATA0()     bfin_read16(CAN_MB02_DATA0)
+#define bfin_write_CAN_MB02_DATA0(val) bfin_write16(CAN_MB02_DATA0, val)
+#define bfin_read_CAN_MB02_DATA1()     bfin_read16(CAN_MB02_DATA1)
+#define bfin_write_CAN_MB02_DATA1(val) bfin_write16(CAN_MB02_DATA1, val)
+#define bfin_read_CAN_MB02_DATA2()     bfin_read16(CAN_MB02_DATA2)
+#define bfin_write_CAN_MB02_DATA2(val) bfin_write16(CAN_MB02_DATA2, val)
+#define bfin_read_CAN_MB02_DATA3()     bfin_read16(CAN_MB02_DATA3)
+#define bfin_write_CAN_MB02_DATA3(val) bfin_write16(CAN_MB02_DATA3, val)
+#define bfin_read_CAN_MB02_LENGTH()    bfin_read16(CAN_MB02_LENGTH)
+#define bfin_write_CAN_MB02_LENGTH(val) bfin_write16(CAN_MB02_LENGTH, val)
+#define bfin_read_CAN_MB02_TIMESTAMP() bfin_read16(CAN_MB02_TIMESTAMP)
+#define bfin_write_CAN_MB02_TIMESTAMP(val) bfin_write16(CAN_MB02_TIMESTAMP, val)
+#define bfin_read_CAN_MB02_ID0()       bfin_read16(CAN_MB02_ID0)
+#define bfin_write_CAN_MB02_ID0(val)   bfin_write16(CAN_MB02_ID0, val)
+#define bfin_read_CAN_MB02_ID1()       bfin_read16(CAN_MB02_ID1)
+#define bfin_write_CAN_MB02_ID1(val)   bfin_write16(CAN_MB02_ID1, val)
+#define bfin_read_CAN_MB03_DATA0()     bfin_read16(CAN_MB03_DATA0)
+#define bfin_write_CAN_MB03_DATA0(val) bfin_write16(CAN_MB03_DATA0, val)
+#define bfin_read_CAN_MB03_DATA1()     bfin_read16(CAN_MB03_DATA1)
+#define bfin_write_CAN_MB03_DATA1(val) bfin_write16(CAN_MB03_DATA1, val)
+#define bfin_read_CAN_MB03_DATA2()     bfin_read16(CAN_MB03_DATA2)
+#define bfin_write_CAN_MB03_DATA2(val) bfin_write16(CAN_MB03_DATA2, val)
+#define bfin_read_CAN_MB03_DATA3()     bfin_read16(CAN_MB03_DATA3)
+#define bfin_write_CAN_MB03_DATA3(val) bfin_write16(CAN_MB03_DATA3, val)
+#define bfin_read_CAN_MB03_LENGTH()    bfin_read16(CAN_MB03_LENGTH)
+#define bfin_write_CAN_MB03_LENGTH(val) bfin_write16(CAN_MB03_LENGTH, val)
+#define bfin_read_CAN_MB03_TIMESTAMP() bfin_read16(CAN_MB03_TIMESTAMP)
+#define bfin_write_CAN_MB03_TIMESTAMP(val) bfin_write16(CAN_MB03_TIMESTAMP, val)
+#define bfin_read_CAN_MB03_ID0()       bfin_read16(CAN_MB03_ID0)
+#define bfin_write_CAN_MB03_ID0(val)   bfin_write16(CAN_MB03_ID0, val)
+#define bfin_read_CAN_MB03_ID1()       bfin_read16(CAN_MB03_ID1)
+#define bfin_write_CAN_MB03_ID1(val)   bfin_write16(CAN_MB03_ID1, val)
+#define bfin_read_CAN_MB04_DATA0()     bfin_read16(CAN_MB04_DATA0)
+#define bfin_write_CAN_MB04_DATA0(val) bfin_write16(CAN_MB04_DATA0, val)
+#define bfin_read_CAN_MB04_DATA1()     bfin_read16(CAN_MB04_DATA1)
+#define bfin_write_CAN_MB04_DATA1(val) bfin_write16(CAN_MB04_DATA1, val)
+#define bfin_read_CAN_MB04_DATA2()     bfin_read16(CAN_MB04_DATA2)
+#define bfin_write_CAN_MB04_DATA2(val) bfin_write16(CAN_MB04_DATA2, val)
+#define bfin_read_CAN_MB04_DATA3()     bfin_read16(CAN_MB04_DATA3)
+#define bfin_write_CAN_MB04_DATA3(val) bfin_write16(CAN_MB04_DATA3, val)
+#define bfin_read_CAN_MB04_LENGTH()    bfin_read16(CAN_MB04_LENGTH)
+#define bfin_write_CAN_MB04_LENGTH(val) bfin_write16(CAN_MB04_LENGTH, val)
+#define bfin_read_CAN_MB04_TIMESTAMP() bfin_read16(CAN_MB04_TIMESTAMP)
+#define bfin_write_CAN_MB04_TIMESTAMP(val) bfin_write16(CAN_MB04_TIMESTAMP, val)
+#define bfin_read_CAN_MB04_ID0()       bfin_read16(CAN_MB04_ID0)
+#define bfin_write_CAN_MB04_ID0(val)   bfin_write16(CAN_MB04_ID0, val)
+#define bfin_read_CAN_MB04_ID1()       bfin_read16(CAN_MB04_ID1)
+#define bfin_write_CAN_MB04_ID1(val)   bfin_write16(CAN_MB04_ID1, val)
+#define bfin_read_CAN_MB05_DATA0()     bfin_read16(CAN_MB05_DATA0)
+#define bfin_write_CAN_MB05_DATA0(val) bfin_write16(CAN_MB05_DATA0, val)
+#define bfin_read_CAN_MB05_DATA1()     bfin_read16(CAN_MB05_DATA1)
+#define bfin_write_CAN_MB05_DATA1(val) bfin_write16(CAN_MB05_DATA1, val)
+#define bfin_read_CAN_MB05_DATA2()     bfin_read16(CAN_MB05_DATA2)
+#define bfin_write_CAN_MB05_DATA2(val) bfin_write16(CAN_MB05_DATA2, val)
+#define bfin_read_CAN_MB05_DATA3()     bfin_read16(CAN_MB05_DATA3)
+#define bfin_write_CAN_MB05_DATA3(val) bfin_write16(CAN_MB05_DATA3, val)
+#define bfin_read_CAN_MB05_LENGTH()    bfin_read16(CAN_MB05_LENGTH)
+#define bfin_write_CAN_MB05_LENGTH(val) bfin_write16(CAN_MB05_LENGTH, val)
+#define bfin_read_CAN_MB05_TIMESTAMP() bfin_read16(CAN_MB05_TIMESTAMP)
+#define bfin_write_CAN_MB05_TIMESTAMP(val) bfin_write16(CAN_MB05_TIMESTAMP, val)
+#define bfin_read_CAN_MB05_ID0()       bfin_read16(CAN_MB05_ID0)
+#define bfin_write_CAN_MB05_ID0(val)   bfin_write16(CAN_MB05_ID0, val)
+#define bfin_read_CAN_MB05_ID1()       bfin_read16(CAN_MB05_ID1)
+#define bfin_write_CAN_MB05_ID1(val)   bfin_write16(CAN_MB05_ID1, val)
+#define bfin_read_CAN_MB06_DATA0()     bfin_read16(CAN_MB06_DATA0)
+#define bfin_write_CAN_MB06_DATA0(val) bfin_write16(CAN_MB06_DATA0, val)
+#define bfin_read_CAN_MB06_DATA1()     bfin_read16(CAN_MB06_DATA1)
+#define bfin_write_CAN_MB06_DATA1(val) bfin_write16(CAN_MB06_DATA1, val)
+#define bfin_read_CAN_MB06_DATA2()     bfin_read16(CAN_MB06_DATA2)
+#define bfin_write_CAN_MB06_DATA2(val) bfin_write16(CAN_MB06_DATA2, val)
+#define bfin_read_CAN_MB06_DATA3()     bfin_read16(CAN_MB06_DATA3)
+#define bfin_write_CAN_MB06_DATA3(val) bfin_write16(CAN_MB06_DATA3, val)
+#define bfin_read_CAN_MB06_LENGTH()    bfin_read16(CAN_MB06_LENGTH)
+#define bfin_write_CAN_MB06_LENGTH(val) bfin_write16(CAN_MB06_LENGTH, val)
+#define bfin_read_CAN_MB06_TIMESTAMP() bfin_read16(CAN_MB06_TIMESTAMP)
+#define bfin_write_CAN_MB06_TIMESTAMP(val) bfin_write16(CAN_MB06_TIMESTAMP, val)
+#define bfin_read_CAN_MB06_ID0()       bfin_read16(CAN_MB06_ID0)
+#define bfin_write_CAN_MB06_ID0(val)   bfin_write16(CAN_MB06_ID0, val)
+#define bfin_read_CAN_MB06_ID1()       bfin_read16(CAN_MB06_ID1)
+#define bfin_write_CAN_MB06_ID1(val)   bfin_write16(CAN_MB06_ID1, val)
+#define bfin_read_CAN_MB07_DATA0()     bfin_read16(CAN_MB07_DATA0)
+#define bfin_write_CAN_MB07_DATA0(val) bfin_write16(CAN_MB07_DATA0, val)
+#define bfin_read_CAN_MB07_DATA1()     bfin_read16(CAN_MB07_DATA1)
+#define bfin_write_CAN_MB07_DATA1(val) bfin_write16(CAN_MB07_DATA1, val)
+#define bfin_read_CAN_MB07_DATA2()     bfin_read16(CAN_MB07_DATA2)
+#define bfin_write_CAN_MB07_DATA2(val) bfin_write16(CAN_MB07_DATA2, val)
+#define bfin_read_CAN_MB07_DATA3()     bfin_read16(CAN_MB07_DATA3)
+#define bfin_write_CAN_MB07_DATA3(val) bfin_write16(CAN_MB07_DATA3, val)
+#define bfin_read_CAN_MB07_LENGTH()    bfin_read16(CAN_MB07_LENGTH)
+#define bfin_write_CAN_MB07_LENGTH(val) bfin_write16(CAN_MB07_LENGTH, val)
+#define bfin_read_CAN_MB07_TIMESTAMP() bfin_read16(CAN_MB07_TIMESTAMP)
+#define bfin_write_CAN_MB07_TIMESTAMP(val) bfin_write16(CAN_MB07_TIMESTAMP, val)
+#define bfin_read_CAN_MB07_ID0()       bfin_read16(CAN_MB07_ID0)
+#define bfin_write_CAN_MB07_ID0(val)   bfin_write16(CAN_MB07_ID0, val)
+#define bfin_read_CAN_MB07_ID1()       bfin_read16(CAN_MB07_ID1)
+#define bfin_write_CAN_MB07_ID1(val)   bfin_write16(CAN_MB07_ID1, val)
+#define bfin_read_CAN_MB08_DATA0()     bfin_read16(CAN_MB08_DATA0)
+#define bfin_write_CAN_MB08_DATA0(val) bfin_write16(CAN_MB08_DATA0, val)
+#define bfin_read_CAN_MB08_DATA1()     bfin_read16(CAN_MB08_DATA1)
+#define bfin_write_CAN_MB08_DATA1(val) bfin_write16(CAN_MB08_DATA1, val)
+#define bfin_read_CAN_MB08_DATA2()     bfin_read16(CAN_MB08_DATA2)
+#define bfin_write_CAN_MB08_DATA2(val) bfin_write16(CAN_MB08_DATA2, val)
+#define bfin_read_CAN_MB08_DATA3()     bfin_read16(CAN_MB08_DATA3)
+#define bfin_write_CAN_MB08_DATA3(val) bfin_write16(CAN_MB08_DATA3, val)
+#define bfin_read_CAN_MB08_LENGTH()    bfin_read16(CAN_MB08_LENGTH)
+#define bfin_write_CAN_MB08_LENGTH(val) bfin_write16(CAN_MB08_LENGTH, val)
+#define bfin_read_CAN_MB08_TIMESTAMP() bfin_read16(CAN_MB08_TIMESTAMP)
+#define bfin_write_CAN_MB08_TIMESTAMP(val) bfin_write16(CAN_MB08_TIMESTAMP, val)
+#define bfin_read_CAN_MB08_ID0()       bfin_read16(CAN_MB08_ID0)
+#define bfin_write_CAN_MB08_ID0(val)   bfin_write16(CAN_MB08_ID0, val)
+#define bfin_read_CAN_MB08_ID1()       bfin_read16(CAN_MB08_ID1)
+#define bfin_write_CAN_MB08_ID1(val)   bfin_write16(CAN_MB08_ID1, val)
+#define bfin_read_CAN_MB09_DATA0()     bfin_read16(CAN_MB09_DATA0)
+#define bfin_write_CAN_MB09_DATA0(val) bfin_write16(CAN_MB09_DATA0, val)
+#define bfin_read_CAN_MB09_DATA1()     bfin_read16(CAN_MB09_DATA1)
+#define bfin_write_CAN_MB09_DATA1(val) bfin_write16(CAN_MB09_DATA1, val)
+#define bfin_read_CAN_MB09_DATA2()     bfin_read16(CAN_MB09_DATA2)
+#define bfin_write_CAN_MB09_DATA2(val) bfin_write16(CAN_MB09_DATA2, val)
+#define bfin_read_CAN_MB09_DATA3()     bfin_read16(CAN_MB09_DATA3)
+#define bfin_write_CAN_MB09_DATA3(val) bfin_write16(CAN_MB09_DATA3, val)
+#define bfin_read_CAN_MB09_LENGTH()    bfin_read16(CAN_MB09_LENGTH)
+#define bfin_write_CAN_MB09_LENGTH(val) bfin_write16(CAN_MB09_LENGTH, val)
+#define bfin_read_CAN_MB09_TIMESTAMP() bfin_read16(CAN_MB09_TIMESTAMP)
+#define bfin_write_CAN_MB09_TIMESTAMP(val) bfin_write16(CAN_MB09_TIMESTAMP, val)
+#define bfin_read_CAN_MB09_ID0()       bfin_read16(CAN_MB09_ID0)
+#define bfin_write_CAN_MB09_ID0(val)   bfin_write16(CAN_MB09_ID0, val)
+#define bfin_read_CAN_MB09_ID1()       bfin_read16(CAN_MB09_ID1)
+#define bfin_write_CAN_MB09_ID1(val)   bfin_write16(CAN_MB09_ID1, val)
+#define bfin_read_CAN_MB10_DATA0()     bfin_read16(CAN_MB10_DATA0)
+#define bfin_write_CAN_MB10_DATA0(val) bfin_write16(CAN_MB10_DATA0, val)
+#define bfin_read_CAN_MB10_DATA1()     bfin_read16(CAN_MB10_DATA1)
+#define bfin_write_CAN_MB10_DATA1(val) bfin_write16(CAN_MB10_DATA1, val)
+#define bfin_read_CAN_MB10_DATA2()     bfin_read16(CAN_MB10_DATA2)
+#define bfin_write_CAN_MB10_DATA2(val) bfin_write16(CAN_MB10_DATA2, val)
+#define bfin_read_CAN_MB10_DATA3()     bfin_read16(CAN_MB10_DATA3)
+#define bfin_write_CAN_MB10_DATA3(val) bfin_write16(CAN_MB10_DATA3, val)
+#define bfin_read_CAN_MB10_LENGTH()    bfin_read16(CAN_MB10_LENGTH)
+#define bfin_write_CAN_MB10_LENGTH(val) bfin_write16(CAN_MB10_LENGTH, val)
+#define bfin_read_CAN_MB10_TIMESTAMP() bfin_read16(CAN_MB10_TIMESTAMP)
+#define bfin_write_CAN_MB10_TIMESTAMP(val) bfin_write16(CAN_MB10_TIMESTAMP, val)
+#define bfin_read_CAN_MB10_ID0()       bfin_read16(CAN_MB10_ID0)
+#define bfin_write_CAN_MB10_ID0(val)   bfin_write16(CAN_MB10_ID0, val)
+#define bfin_read_CAN_MB10_ID1()       bfin_read16(CAN_MB10_ID1)
+#define bfin_write_CAN_MB10_ID1(val)   bfin_write16(CAN_MB10_ID1, val)
+#define bfin_read_CAN_MB11_DATA0()     bfin_read16(CAN_MB11_DATA0)
+#define bfin_write_CAN_MB11_DATA0(val) bfin_write16(CAN_MB11_DATA0, val)
+#define bfin_read_CAN_MB11_DATA1()     bfin_read16(CAN_MB11_DATA1)
+#define bfin_write_CAN_MB11_DATA1(val) bfin_write16(CAN_MB11_DATA1, val)
+#define bfin_read_CAN_MB11_DATA2()     bfin_read16(CAN_MB11_DATA2)
+#define bfin_write_CAN_MB11_DATA2(val) bfin_write16(CAN_MB11_DATA2, val)
+#define bfin_read_CAN_MB11_DATA3()     bfin_read16(CAN_MB11_DATA3)
+#define bfin_write_CAN_MB11_DATA3(val) bfin_write16(CAN_MB11_DATA3, val)
+#define bfin_read_CAN_MB11_LENGTH()    bfin_read16(CAN_MB11_LENGTH)
+#define bfin_write_CAN_MB11_LENGTH(val) bfin_write16(CAN_MB11_LENGTH, val)
+#define bfin_read_CAN_MB11_TIMESTAMP() bfin_read16(CAN_MB11_TIMESTAMP)
+#define bfin_write_CAN_MB11_TIMESTAMP(val) bfin_write16(CAN_MB11_TIMESTAMP, val)
+#define bfin_read_CAN_MB11_ID0()       bfin_read16(CAN_MB11_ID0)
+#define bfin_write_CAN_MB11_ID0(val)   bfin_write16(CAN_MB11_ID0, val)
+#define bfin_read_CAN_MB11_ID1()       bfin_read16(CAN_MB11_ID1)
+#define bfin_write_CAN_MB11_ID1(val)   bfin_write16(CAN_MB11_ID1, val)
+#define bfin_read_CAN_MB12_DATA0()     bfin_read16(CAN_MB12_DATA0)
+#define bfin_write_CAN_MB12_DATA0(val) bfin_write16(CAN_MB12_DATA0, val)
+#define bfin_read_CAN_MB12_DATA1()     bfin_read16(CAN_MB12_DATA1)
+#define bfin_write_CAN_MB12_DATA1(val) bfin_write16(CAN_MB12_DATA1, val)
+#define bfin_read_CAN_MB12_DATA2()     bfin_read16(CAN_MB12_DATA2)
+#define bfin_write_CAN_MB12_DATA2(val) bfin_write16(CAN_MB12_DATA2, val)
+#define bfin_read_CAN_MB12_DATA3()     bfin_read16(CAN_MB12_DATA3)
+#define bfin_write_CAN_MB12_DATA3(val) bfin_write16(CAN_MB12_DATA3, val)
+#define bfin_read_CAN_MB12_LENGTH()    bfin_read16(CAN_MB12_LENGTH)
+#define bfin_write_CAN_MB12_LENGTH(val) bfin_write16(CAN_MB12_LENGTH, val)
+#define bfin_read_CAN_MB12_TIMESTAMP() bfin_read16(CAN_MB12_TIMESTAMP)
+#define bfin_write_CAN_MB12_TIMESTAMP(val) bfin_write16(CAN_MB12_TIMESTAMP, val)
+#define bfin_read_CAN_MB12_ID0()       bfin_read16(CAN_MB12_ID0)
+#define bfin_write_CAN_MB12_ID0(val)   bfin_write16(CAN_MB12_ID0, val)
+#define bfin_read_CAN_MB12_ID1()       bfin_read16(CAN_MB12_ID1)
+#define bfin_write_CAN_MB12_ID1(val)   bfin_write16(CAN_MB12_ID1, val)
+#define bfin_read_CAN_MB13_DATA0()     bfin_read16(CAN_MB13_DATA0)
+#define bfin_write_CAN_MB13_DATA0(val) bfin_write16(CAN_MB13_DATA0, val)
+#define bfin_read_CAN_MB13_DATA1()     bfin_read16(CAN_MB13_DATA1)
+#define bfin_write_CAN_MB13_DATA1(val) bfin_write16(CAN_MB13_DATA1, val)
+#define bfin_read_CAN_MB13_DATA2()     bfin_read16(CAN_MB13_DATA2)
+#define bfin_write_CAN_MB13_DATA2(val) bfin_write16(CAN_MB13_DATA2, val)
+#define bfin_read_CAN_MB13_DATA3()     bfin_read16(CAN_MB13_DATA3)
+#define bfin_write_CAN_MB13_DATA3(val) bfin_write16(CAN_MB13_DATA3, val)
+#define bfin_read_CAN_MB13_LENGTH()    bfin_read16(CAN_MB13_LENGTH)
+#define bfin_write_CAN_MB13_LENGTH(val) bfin_write16(CAN_MB13_LENGTH, val)
+#define bfin_read_CAN_MB13_TIMESTAMP() bfin_read16(CAN_MB13_TIMESTAMP)
+#define bfin_write_CAN_MB13_TIMESTAMP(val) bfin_write16(CAN_MB13_TIMESTAMP, val)
+#define bfin_read_CAN_MB13_ID0()       bfin_read16(CAN_MB13_ID0)
+#define bfin_write_CAN_MB13_ID0(val)   bfin_write16(CAN_MB13_ID0, val)
+#define bfin_read_CAN_MB13_ID1()       bfin_read16(CAN_MB13_ID1)
+#define bfin_write_CAN_MB13_ID1(val)   bfin_write16(CAN_MB13_ID1, val)
+#define bfin_read_CAN_MB14_DATA0()     bfin_read16(CAN_MB14_DATA0)
+#define bfin_write_CAN_MB14_DATA0(val) bfin_write16(CAN_MB14_DATA0, val)
+#define bfin_read_CAN_MB14_DATA1()     bfin_read16(CAN_MB14_DATA1)
+#define bfin_write_CAN_MB14_DATA1(val) bfin_write16(CAN_MB14_DATA1, val)
+#define bfin_read_CAN_MB14_DATA2()     bfin_read16(CAN_MB14_DATA2)
+#define bfin_write_CAN_MB14_DATA2(val) bfin_write16(CAN_MB14_DATA2, val)
+#define bfin_read_CAN_MB14_DATA3()     bfin_read16(CAN_MB14_DATA3)
+#define bfin_write_CAN_MB14_DATA3(val) bfin_write16(CAN_MB14_DATA3, val)
+#define bfin_read_CAN_MB14_LENGTH()    bfin_read16(CAN_MB14_LENGTH)
+#define bfin_write_CAN_MB14_LENGTH(val) bfin_write16(CAN_MB14_LENGTH, val)
+#define bfin_read_CAN_MB14_TIMESTAMP() bfin_read16(CAN_MB14_TIMESTAMP)
+#define bfin_write_CAN_MB14_TIMESTAMP(val) bfin_write16(CAN_MB14_TIMESTAMP, val)
+#define bfin_read_CAN_MB14_ID0()       bfin_read16(CAN_MB14_ID0)
+#define bfin_write_CAN_MB14_ID0(val)   bfin_write16(CAN_MB14_ID0, val)
+#define bfin_read_CAN_MB14_ID1()       bfin_read16(CAN_MB14_ID1)
+#define bfin_write_CAN_MB14_ID1(val)   bfin_write16(CAN_MB14_ID1, val)
+#define bfin_read_CAN_MB15_DATA0()     bfin_read16(CAN_MB15_DATA0)
+#define bfin_write_CAN_MB15_DATA0(val) bfin_write16(CAN_MB15_DATA0, val)
+#define bfin_read_CAN_MB15_DATA1()     bfin_read16(CAN_MB15_DATA1)
+#define bfin_write_CAN_MB15_DATA1(val) bfin_write16(CAN_MB15_DATA1, val)
+#define bfin_read_CAN_MB15_DATA2()     bfin_read16(CAN_MB15_DATA2)
+#define bfin_write_CAN_MB15_DATA2(val) bfin_write16(CAN_MB15_DATA2, val)
+#define bfin_read_CAN_MB15_DATA3()     bfin_read16(CAN_MB15_DATA3)
+#define bfin_write_CAN_MB15_DATA3(val) bfin_write16(CAN_MB15_DATA3, val)
+#define bfin_read_CAN_MB15_LENGTH()    bfin_read16(CAN_MB15_LENGTH)
+#define bfin_write_CAN_MB15_LENGTH(val) bfin_write16(CAN_MB15_LENGTH, val)
+#define bfin_read_CAN_MB15_TIMESTAMP() bfin_read16(CAN_MB15_TIMESTAMP)
+#define bfin_write_CAN_MB15_TIMESTAMP(val) bfin_write16(CAN_MB15_TIMESTAMP, val)
+#define bfin_read_CAN_MB15_ID0()       bfin_read16(CAN_MB15_ID0)
+#define bfin_write_CAN_MB15_ID0(val)   bfin_write16(CAN_MB15_ID0, val)
+#define bfin_read_CAN_MB15_ID1()       bfin_read16(CAN_MB15_ID1)
+#define bfin_write_CAN_MB15_ID1(val)   bfin_write16(CAN_MB15_ID1, val)
+#define bfin_read_CAN_MB16_DATA0()     bfin_read16(CAN_MB16_DATA0)
+#define bfin_write_CAN_MB16_DATA0(val) bfin_write16(CAN_MB16_DATA0, val)
+#define bfin_read_CAN_MB16_DATA1()     bfin_read16(CAN_MB16_DATA1)
+#define bfin_write_CAN_MB16_DATA1(val) bfin_write16(CAN_MB16_DATA1, val)
+#define bfin_read_CAN_MB16_DATA2()     bfin_read16(CAN_MB16_DATA2)
+#define bfin_write_CAN_MB16_DATA2(val) bfin_write16(CAN_MB16_DATA2, val)
+#define bfin_read_CAN_MB16_DATA3()     bfin_read16(CAN_MB16_DATA3)
+#define bfin_write_CAN_MB16_DATA3(val) bfin_write16(CAN_MB16_DATA3, val)
+#define bfin_read_CAN_MB16_LENGTH()    bfin_read16(CAN_MB16_LENGTH)
+#define bfin_write_CAN_MB16_LENGTH(val) bfin_write16(CAN_MB16_LENGTH, val)
+#define bfin_read_CAN_MB16_TIMESTAMP() bfin_read16(CAN_MB16_TIMESTAMP)
+#define bfin_write_CAN_MB16_TIMESTAMP(val) bfin_write16(CAN_MB16_TIMESTAMP, val)
+#define bfin_read_CAN_MB16_ID0()       bfin_read16(CAN_MB16_ID0)
+#define bfin_write_CAN_MB16_ID0(val)   bfin_write16(CAN_MB16_ID0, val)
+#define bfin_read_CAN_MB16_ID1()       bfin_read16(CAN_MB16_ID1)
+#define bfin_write_CAN_MB16_ID1(val)   bfin_write16(CAN_MB16_ID1, val)
+#define bfin_read_CAN_MB17_DATA0()     bfin_read16(CAN_MB17_DATA0)
+#define bfin_write_CAN_MB17_DATA0(val) bfin_write16(CAN_MB17_DATA0, val)
+#define bfin_read_CAN_MB17_DATA1()     bfin_read16(CAN_MB17_DATA1)
+#define bfin_write_CAN_MB17_DATA1(val) bfin_write16(CAN_MB17_DATA1, val)
+#define bfin_read_CAN_MB17_DATA2()     bfin_read16(CAN_MB17_DATA2)
+#define bfin_write_CAN_MB17_DATA2(val) bfin_write16(CAN_MB17_DATA2, val)
+#define bfin_read_CAN_MB17_DATA3()     bfin_read16(CAN_MB17_DATA3)
+#define bfin_write_CAN_MB17_DATA3(val) bfin_write16(CAN_MB17_DATA3, val)
+#define bfin_read_CAN_MB17_LENGTH()    bfin_read16(CAN_MB17_LENGTH)
+#define bfin_write_CAN_MB17_LENGTH(val) bfin_write16(CAN_MB17_LENGTH, val)
+#define bfin_read_CAN_MB17_TIMESTAMP() bfin_read16(CAN_MB17_TIMESTAMP)
+#define bfin_write_CAN_MB17_TIMESTAMP(val) bfin_write16(CAN_MB17_TIMESTAMP, val)
+#define bfin_read_CAN_MB17_ID0()       bfin_read16(CAN_MB17_ID0)
+#define bfin_write_CAN_MB17_ID0(val)   bfin_write16(CAN_MB17_ID0, val)
+#define bfin_read_CAN_MB17_ID1()       bfin_read16(CAN_MB17_ID1)
+#define bfin_write_CAN_MB17_ID1(val)   bfin_write16(CAN_MB17_ID1, val)
+#define bfin_read_CAN_MB18_DATA0()     bfin_read16(CAN_MB18_DATA0)
+#define bfin_write_CAN_MB18_DATA0(val) bfin_write16(CAN_MB18_DATA0, val)
+#define bfin_read_CAN_MB18_DATA1()     bfin_read16(CAN_MB18_DATA1)
+#define bfin_write_CAN_MB18_DATA1(val) bfin_write16(CAN_MB18_DATA1, val)
+#define bfin_read_CAN_MB18_DATA2()     bfin_read16(CAN_MB18_DATA2)
+#define bfin_write_CAN_MB18_DATA2(val) bfin_write16(CAN_MB18_DATA2, val)
+#define bfin_read_CAN_MB18_DATA3()     bfin_read16(CAN_MB18_DATA3)
+#define bfin_write_CAN_MB18_DATA3(val) bfin_write16(CAN_MB18_DATA3, val)
+#define bfin_read_CAN_MB18_LENGTH()    bfin_read16(CAN_MB18_LENGTH)
+#define bfin_write_CAN_MB18_LENGTH(val) bfin_write16(CAN_MB18_LENGTH, val)
+#define bfin_read_CAN_MB18_TIMESTAMP() bfin_read16(CAN_MB18_TIMESTAMP)
+#define bfin_write_CAN_MB18_TIMESTAMP(val) bfin_write16(CAN_MB18_TIMESTAMP, val)
+#define bfin_read_CAN_MB18_ID0()       bfin_read16(CAN_MB18_ID0)
+#define bfin_write_CAN_MB18_ID0(val)   bfin_write16(CAN_MB18_ID0, val)
+#define bfin_read_CAN_MB18_ID1()       bfin_read16(CAN_MB18_ID1)
+#define bfin_write_CAN_MB18_ID1(val)   bfin_write16(CAN_MB18_ID1, val)
+#define bfin_read_CAN_MB19_DATA0()     bfin_read16(CAN_MB19_DATA0)
+#define bfin_write_CAN_MB19_DATA0(val) bfin_write16(CAN_MB19_DATA0, val)
+#define bfin_read_CAN_MB19_DATA1()     bfin_read16(CAN_MB19_DATA1)
+#define bfin_write_CAN_MB19_DATA1(val) bfin_write16(CAN_MB19_DATA1, val)
+#define bfin_read_CAN_MB19_DATA2()     bfin_read16(CAN_MB19_DATA2)
+#define bfin_write_CAN_MB19_DATA2(val) bfin_write16(CAN_MB19_DATA2, val)
+#define bfin_read_CAN_MB19_DATA3()     bfin_read16(CAN_MB19_DATA3)
+#define bfin_write_CAN_MB19_DATA3(val) bfin_write16(CAN_MB19_DATA3, val)
+#define bfin_read_CAN_MB19_LENGTH()    bfin_read16(CAN_MB19_LENGTH)
+#define bfin_write_CAN_MB19_LENGTH(val) bfin_write16(CAN_MB19_LENGTH, val)
+#define bfin_read_CAN_MB19_TIMESTAMP() bfin_read16(CAN_MB19_TIMESTAMP)
+#define bfin_write_CAN_MB19_TIMESTAMP(val) bfin_write16(CAN_MB19_TIMESTAMP, val)
+#define bfin_read_CAN_MB19_ID0()       bfin_read16(CAN_MB19_ID0)
+#define bfin_write_CAN_MB19_ID0(val)   bfin_write16(CAN_MB19_ID0, val)
+#define bfin_read_CAN_MB19_ID1()       bfin_read16(CAN_MB19_ID1)
+#define bfin_write_CAN_MB19_ID1(val)   bfin_write16(CAN_MB19_ID1, val)
+#define bfin_read_CAN_MB20_DATA0()     bfin_read16(CAN_MB20_DATA0)
+#define bfin_write_CAN_MB20_DATA0(val) bfin_write16(CAN_MB20_DATA0, val)
+#define bfin_read_CAN_MB20_DATA1()     bfin_read16(CAN_MB20_DATA1)
+#define bfin_write_CAN_MB20_DATA1(val) bfin_write16(CAN_MB20_DATA1, val)
+#define bfin_read_CAN_MB20_DATA2()     bfin_read16(CAN_MB20_DATA2)
+#define bfin_write_CAN_MB20_DATA2(val) bfin_write16(CAN_MB20_DATA2, val)
+#define bfin_read_CAN_MB20_DATA3()     bfin_read16(CAN_MB20_DATA3)
+#define bfin_write_CAN_MB20_DATA3(val) bfin_write16(CAN_MB20_DATA3, val)
+#define bfin_read_CAN_MB20_LENGTH()    bfin_read16(CAN_MB20_LENGTH)
+#define bfin_write_CAN_MB20_LENGTH(val) bfin_write16(CAN_MB20_LENGTH, val)
+#define bfin_read_CAN_MB20_TIMESTAMP() bfin_read16(CAN_MB20_TIMESTAMP)
+#define bfin_write_CAN_MB20_TIMESTAMP(val) bfin_write16(CAN_MB20_TIMESTAMP, val)
+#define bfin_read_CAN_MB20_ID0()       bfin_read16(CAN_MB20_ID0)
+#define bfin_write_CAN_MB20_ID0(val)   bfin_write16(CAN_MB20_ID0, val)
+#define bfin_read_CAN_MB20_ID1()       bfin_read16(CAN_MB20_ID1)
+#define bfin_write_CAN_MB20_ID1(val)   bfin_write16(CAN_MB20_ID1, val)
+#define bfin_read_CAN_MB21_DATA0()     bfin_read16(CAN_MB21_DATA0)
+#define bfin_write_CAN_MB21_DATA0(val) bfin_write16(CAN_MB21_DATA0, val)
+#define bfin_read_CAN_MB21_DATA1()     bfin_read16(CAN_MB21_DATA1)
+#define bfin_write_CAN_MB21_DATA1(val) bfin_write16(CAN_MB21_DATA1, val)
+#define bfin_read_CAN_MB21_DATA2()     bfin_read16(CAN_MB21_DATA2)
+#define bfin_write_CAN_MB21_DATA2(val) bfin_write16(CAN_MB21_DATA2, val)
+#define bfin_read_CAN_MB21_DATA3()     bfin_read16(CAN_MB21_DATA3)
+#define bfin_write_CAN_MB21_DATA3(val) bfin_write16(CAN_MB21_DATA3, val)
+#define bfin_read_CAN_MB21_LENGTH()    bfin_read16(CAN_MB21_LENGTH)
+#define bfin_write_CAN_MB21_LENGTH(val) bfin_write16(CAN_MB21_LENGTH, val)
+#define bfin_read_CAN_MB21_TIMESTAMP() bfin_read16(CAN_MB21_TIMESTAMP)
+#define bfin_write_CAN_MB21_TIMESTAMP(val) bfin_write16(CAN_MB21_TIMESTAMP, val)
+#define bfin_read_CAN_MB21_ID0()       bfin_read16(CAN_MB21_ID0)
+#define bfin_write_CAN_MB21_ID0(val)   bfin_write16(CAN_MB21_ID0, val)
+#define bfin_read_CAN_MB21_ID1()       bfin_read16(CAN_MB21_ID1)
+#define bfin_write_CAN_MB21_ID1(val)   bfin_write16(CAN_MB21_ID1, val)
+#define bfin_read_CAN_MB22_DATA0()     bfin_read16(CAN_MB22_DATA0)
+#define bfin_write_CAN_MB22_DATA0(val) bfin_write16(CAN_MB22_DATA0, val)
+#define bfin_read_CAN_MB22_DATA1()     bfin_read16(CAN_MB22_DATA1)
+#define bfin_write_CAN_MB22_DATA1(val) bfin_write16(CAN_MB22_DATA1, val)
+#define bfin_read_CAN_MB22_DATA2()     bfin_read16(CAN_MB22_DATA2)
+#define bfin_write_CAN_MB22_DATA2(val) bfin_write16(CAN_MB22_DATA2, val)
+#define bfin_read_CAN_MB22_DATA3()     bfin_read16(CAN_MB22_DATA3)
+#define bfin_write_CAN_MB22_DATA3(val) bfin_write16(CAN_MB22_DATA3, val)
+#define bfin_read_CAN_MB22_LENGTH()    bfin_read16(CAN_MB22_LENGTH)
+#define bfin_write_CAN_MB22_LENGTH(val) bfin_write16(CAN_MB22_LENGTH, val)
+#define bfin_read_CAN_MB22_TIMESTAMP() bfin_read16(CAN_MB22_TIMESTAMP)
+#define bfin_write_CAN_MB22_TIMESTAMP(val) bfin_write16(CAN_MB22_TIMESTAMP, val)
+#define bfin_read_CAN_MB22_ID0()       bfin_read16(CAN_MB22_ID0)
+#define bfin_write_CAN_MB22_ID0(val)   bfin_write16(CAN_MB22_ID0, val)
+#define bfin_read_CAN_MB22_ID1()       bfin_read16(CAN_MB22_ID1)
+#define bfin_write_CAN_MB22_ID1(val)   bfin_write16(CAN_MB22_ID1, val)
+#define bfin_read_CAN_MB23_DATA0()     bfin_read16(CAN_MB23_DATA0)
+#define bfin_write_CAN_MB23_DATA0(val) bfin_write16(CAN_MB23_DATA0, val)
+#define bfin_read_CAN_MB23_DATA1()     bfin_read16(CAN_MB23_DATA1)
+#define bfin_write_CAN_MB23_DATA1(val) bfin_write16(CAN_MB23_DATA1, val)
+#define bfin_read_CAN_MB23_DATA2()     bfin_read16(CAN_MB23_DATA2)
+#define bfin_write_CAN_MB23_DATA2(val) bfin_write16(CAN_MB23_DATA2, val)
+#define bfin_read_CAN_MB23_DATA3()     bfin_read16(CAN_MB23_DATA3)
+#define bfin_write_CAN_MB23_DATA3(val) bfin_write16(CAN_MB23_DATA3, val)
+#define bfin_read_CAN_MB23_LENGTH()    bfin_read16(CAN_MB23_LENGTH)
+#define bfin_write_CAN_MB23_LENGTH(val) bfin_write16(CAN_MB23_LENGTH, val)
+#define bfin_read_CAN_MB23_TIMESTAMP() bfin_read16(CAN_MB23_TIMESTAMP)
+#define bfin_write_CAN_MB23_TIMESTAMP(val) bfin_write16(CAN_MB23_TIMESTAMP, val)
+#define bfin_read_CAN_MB23_ID0()       bfin_read16(CAN_MB23_ID0)
+#define bfin_write_CAN_MB23_ID0(val)   bfin_write16(CAN_MB23_ID0, val)
+#define bfin_read_CAN_MB23_ID1()       bfin_read16(CAN_MB23_ID1)
+#define bfin_write_CAN_MB23_ID1(val)   bfin_write16(CAN_MB23_ID1, val)
+#define bfin_read_CAN_MB24_DATA0()     bfin_read16(CAN_MB24_DATA0)
+#define bfin_write_CAN_MB24_DATA0(val) bfin_write16(CAN_MB24_DATA0, val)
+#define bfin_read_CAN_MB24_DATA1()     bfin_read16(CAN_MB24_DATA1)
+#define bfin_write_CAN_MB24_DATA1(val) bfin_write16(CAN_MB24_DATA1, val)
+#define bfin_read_CAN_MB24_DATA2()     bfin_read16(CAN_MB24_DATA2)
+#define bfin_write_CAN_MB24_DATA2(val) bfin_write16(CAN_MB24_DATA2, val)
+#define bfin_read_CAN_MB24_DATA3()     bfin_read16(CAN_MB24_DATA3)
+#define bfin_write_CAN_MB24_DATA3(val) bfin_write16(CAN_MB24_DATA3, val)
+#define bfin_read_CAN_MB24_LENGTH()    bfin_read16(CAN_MB24_LENGTH)
+#define bfin_write_CAN_MB24_LENGTH(val) bfin_write16(CAN_MB24_LENGTH, val)
+#define bfin_read_CAN_MB24_TIMESTAMP() bfin_read16(CAN_MB24_TIMESTAMP)
+#define bfin_write_CAN_MB24_TIMESTAMP(val) bfin_write16(CAN_MB24_TIMESTAMP, val)
+#define bfin_read_CAN_MB24_ID0()       bfin_read16(CAN_MB24_ID0)
+#define bfin_write_CAN_MB24_ID0(val)   bfin_write16(CAN_MB24_ID0, val)
+#define bfin_read_CAN_MB24_ID1()       bfin_read16(CAN_MB24_ID1)
+#define bfin_write_CAN_MB24_ID1(val)   bfin_write16(CAN_MB24_ID1, val)
+#define bfin_read_CAN_MB25_DATA0()     bfin_read16(CAN_MB25_DATA0)
+#define bfin_write_CAN_MB25_DATA0(val) bfin_write16(CAN_MB25_DATA0, val)
+#define bfin_read_CAN_MB25_DATA1()     bfin_read16(CAN_MB25_DATA1)
+#define bfin_write_CAN_MB25_DATA1(val) bfin_write16(CAN_MB25_DATA1, val)
+#define bfin_read_CAN_MB25_DATA2()     bfin_read16(CAN_MB25_DATA2)
+#define bfin_write_CAN_MB25_DATA2(val) bfin_write16(CAN_MB25_DATA2, val)
+#define bfin_read_CAN_MB25_DATA3()     bfin_read16(CAN_MB25_DATA3)
+#define bfin_write_CAN_MB25_DATA3(val) bfin_write16(CAN_MB25_DATA3, val)
+#define bfin_read_CAN_MB25_LENGTH()    bfin_read16(CAN_MB25_LENGTH)
+#define bfin_write_CAN_MB25_LENGTH(val) bfin_write16(CAN_MB25_LENGTH, val)
+#define bfin_read_CAN_MB25_TIMESTAMP() bfin_read16(CAN_MB25_TIMESTAMP)
+#define bfin_write_CAN_MB25_TIMESTAMP(val) bfin_write16(CAN_MB25_TIMESTAMP, val)
+#define bfin_read_CAN_MB25_ID0()       bfin_read16(CAN_MB25_ID0)
+#define bfin_write_CAN_MB25_ID0(val)   bfin_write16(CAN_MB25_ID0, val)
+#define bfin_read_CAN_MB25_ID1()       bfin_read16(CAN_MB25_ID1)
+#define bfin_write_CAN_MB25_ID1(val)   bfin_write16(CAN_MB25_ID1, val)
+#define bfin_read_CAN_MB26_DATA0()     bfin_read16(CAN_MB26_DATA0)
+#define bfin_write_CAN_MB26_DATA0(val) bfin_write16(CAN_MB26_DATA0, val)
+#define bfin_read_CAN_MB26_DATA1()     bfin_read16(CAN_MB26_DATA1)
+#define bfin_write_CAN_MB26_DATA1(val) bfin_write16(CAN_MB26_DATA1, val)
+#define bfin_read_CAN_MB26_DATA2()     bfin_read16(CAN_MB26_DATA2)
+#define bfin_write_CAN_MB26_DATA2(val) bfin_write16(CAN_MB26_DATA2, val)
+#define bfin_read_CAN_MB26_DATA3()     bfin_read16(CAN_MB26_DATA3)
+#define bfin_write_CAN_MB26_DATA3(val) bfin_write16(CAN_MB26_DATA3, val)
+#define bfin_read_CAN_MB26_LENGTH()    bfin_read16(CAN_MB26_LENGTH)
+#define bfin_write_CAN_MB26_LENGTH(val) bfin_write16(CAN_MB26_LENGTH, val)
+#define bfin_read_CAN_MB26_TIMESTAMP() bfin_read16(CAN_MB26_TIMESTAMP)
+#define bfin_write_CAN_MB26_TIMESTAMP(val) bfin_write16(CAN_MB26_TIMESTAMP, val)
+#define bfin_read_CAN_MB26_ID0()       bfin_read16(CAN_MB26_ID0)
+#define bfin_write_CAN_MB26_ID0(val)   bfin_write16(CAN_MB26_ID0, val)
+#define bfin_read_CAN_MB26_ID1()       bfin_read16(CAN_MB26_ID1)
+#define bfin_write_CAN_MB26_ID1(val)   bfin_write16(CAN_MB26_ID1, val)
+#define bfin_read_CAN_MB27_DATA0()     bfin_read16(CAN_MB27_DATA0)
+#define bfin_write_CAN_MB27_DATA0(val) bfin_write16(CAN_MB27_DATA0, val)
+#define bfin_read_CAN_MB27_DATA1()     bfin_read16(CAN_MB27_DATA1)
+#define bfin_write_CAN_MB27_DATA1(val) bfin_write16(CAN_MB27_DATA1, val)
+#define bfin_read_CAN_MB27_DATA2()     bfin_read16(CAN_MB27_DATA2)
+#define bfin_write_CAN_MB27_DATA2(val) bfin_write16(CAN_MB27_DATA2, val)
+#define bfin_read_CAN_MB27_DATA3()     bfin_read16(CAN_MB27_DATA3)
+#define bfin_write_CAN_MB27_DATA3(val) bfin_write16(CAN_MB27_DATA3, val)
+#define bfin_read_CAN_MB27_LENGTH()    bfin_read16(CAN_MB27_LENGTH)
+#define bfin_write_CAN_MB27_LENGTH(val) bfin_write16(CAN_MB27_LENGTH, val)
+#define bfin_read_CAN_MB27_TIMESTAMP() bfin_read16(CAN_MB27_TIMESTAMP)
+#define bfin_write_CAN_MB27_TIMESTAMP(val) bfin_write16(CAN_MB27_TIMESTAMP, val)
+#define bfin_read_CAN_MB27_ID0()       bfin_read16(CAN_MB27_ID0)
+#define bfin_write_CAN_MB27_ID0(val)   bfin_write16(CAN_MB27_ID0, val)
+#define bfin_read_CAN_MB27_ID1()       bfin_read16(CAN_MB27_ID1)
+#define bfin_write_CAN_MB27_ID1(val)   bfin_write16(CAN_MB27_ID1, val)
+#define bfin_read_CAN_MB28_DATA0()     bfin_read16(CAN_MB28_DATA0)
+#define bfin_write_CAN_MB28_DATA0(val) bfin_write16(CAN_MB28_DATA0, val)
+#define bfin_read_CAN_MB28_DATA1()     bfin_read16(CAN_MB28_DATA1)
+#define bfin_write_CAN_MB28_DATA1(val) bfin_write16(CAN_MB28_DATA1, val)
+#define bfin_read_CAN_MB28_DATA2()     bfin_read16(CAN_MB28_DATA2)
+#define bfin_write_CAN_MB28_DATA2(val) bfin_write16(CAN_MB28_DATA2, val)
+#define bfin_read_CAN_MB28_DATA3()     bfin_read16(CAN_MB28_DATA3)
+#define bfin_write_CAN_MB28_DATA3(val) bfin_write16(CAN_MB28_DATA3, val)
+#define bfin_read_CAN_MB28_LENGTH()    bfin_read16(CAN_MB28_LENGTH)
+#define bfin_write_CAN_MB28_LENGTH(val) bfin_write16(CAN_MB28_LENGTH, val)
+#define bfin_read_CAN_MB28_TIMESTAMP() bfin_read16(CAN_MB28_TIMESTAMP)
+#define bfin_write_CAN_MB28_TIMESTAMP(val) bfin_write16(CAN_MB28_TIMESTAMP, val)
+#define bfin_read_CAN_MB28_ID0()       bfin_read16(CAN_MB28_ID0)
+#define bfin_write_CAN_MB28_ID0(val)   bfin_write16(CAN_MB28_ID0, val)
+#define bfin_read_CAN_MB28_ID1()       bfin_read16(CAN_MB28_ID1)
+#define bfin_write_CAN_MB28_ID1(val)   bfin_write16(CAN_MB28_ID1, val)
+#define bfin_read_CAN_MB29_DATA0()     bfin_read16(CAN_MB29_DATA0)
+#define bfin_write_CAN_MB29_DATA0(val) bfin_write16(CAN_MB29_DATA0, val)
+#define bfin_read_CAN_MB29_DATA1()     bfin_read16(CAN_MB29_DATA1)
+#define bfin_write_CAN_MB29_DATA1(val) bfin_write16(CAN_MB29_DATA1, val)
+#define bfin_read_CAN_MB29_DATA2()     bfin_read16(CAN_MB29_DATA2)
+#define bfin_write_CAN_MB29_DATA2(val) bfin_write16(CAN_MB29_DATA2, val)
+#define bfin_read_CAN_MB29_DATA3()     bfin_read16(CAN_MB29_DATA3)
+#define bfin_write_CAN_MB29_DATA3(val) bfin_write16(CAN_MB29_DATA3, val)
+#define bfin_read_CAN_MB29_LENGTH()    bfin_read16(CAN_MB29_LENGTH)
+#define bfin_write_CAN_MB29_LENGTH(val) bfin_write16(CAN_MB29_LENGTH, val)
+#define bfin_read_CAN_MB29_TIMESTAMP() bfin_read16(CAN_MB29_TIMESTAMP)
+#define bfin_write_CAN_MB29_TIMESTAMP(val) bfin_write16(CAN_MB29_TIMESTAMP, val)
+#define bfin_read_CAN_MB29_ID0()       bfin_read16(CAN_MB29_ID0)
+#define bfin_write_CAN_MB29_ID0(val)   bfin_write16(CAN_MB29_ID0, val)
+#define bfin_read_CAN_MB29_ID1()       bfin_read16(CAN_MB29_ID1)
+#define bfin_write_CAN_MB29_ID1(val)   bfin_write16(CAN_MB29_ID1, val)
+#define bfin_read_CAN_MB30_DATA0()     bfin_read16(CAN_MB30_DATA0)
+#define bfin_write_CAN_MB30_DATA0(val) bfin_write16(CAN_MB30_DATA0, val)
+#define bfin_read_CAN_MB30_DATA1()     bfin_read16(CAN_MB30_DATA1)
+#define bfin_write_CAN_MB30_DATA1(val) bfin_write16(CAN_MB30_DATA1, val)
+#define bfin_read_CAN_MB30_DATA2()     bfin_read16(CAN_MB30_DATA2)
+#define bfin_write_CAN_MB30_DATA2(val) bfin_write16(CAN_MB30_DATA2, val)
+#define bfin_read_CAN_MB30_DATA3()     bfin_read16(CAN_MB30_DATA3)
+#define bfin_write_CAN_MB30_DATA3(val) bfin_write16(CAN_MB30_DATA3, val)
+#define bfin_read_CAN_MB30_LENGTH()    bfin_read16(CAN_MB30_LENGTH)
+#define bfin_write_CAN_MB30_LENGTH(val) bfin_write16(CAN_MB30_LENGTH, val)
+#define bfin_read_CAN_MB30_TIMESTAMP() bfin_read16(CAN_MB30_TIMESTAMP)
+#define bfin_write_CAN_MB30_TIMESTAMP(val) bfin_write16(CAN_MB30_TIMESTAMP, val)
+#define bfin_read_CAN_MB30_ID0()       bfin_read16(CAN_MB30_ID0)
+#define bfin_write_CAN_MB30_ID0(val)   bfin_write16(CAN_MB30_ID0, val)
+#define bfin_read_CAN_MB30_ID1()       bfin_read16(CAN_MB30_ID1)
+#define bfin_write_CAN_MB30_ID1(val)   bfin_write16(CAN_MB30_ID1, val)
+#define bfin_read_CAN_MB31_DATA0()     bfin_read16(CAN_MB31_DATA0)
+#define bfin_write_CAN_MB31_DATA0(val) bfin_write16(CAN_MB31_DATA0, val)
+#define bfin_read_CAN_MB31_DATA1()     bfin_read16(CAN_MB31_DATA1)
+#define bfin_write_CAN_MB31_DATA1(val) bfin_write16(CAN_MB31_DATA1, val)
+#define bfin_read_CAN_MB31_DATA2()     bfin_read16(CAN_MB31_DATA2)
+#define bfin_write_CAN_MB31_DATA2(val) bfin_write16(CAN_MB31_DATA2, val)
+#define bfin_read_CAN_MB31_DATA3()     bfin_read16(CAN_MB31_DATA3)
+#define bfin_write_CAN_MB31_DATA3(val) bfin_write16(CAN_MB31_DATA3, val)
+#define bfin_read_CAN_MB31_LENGTH()    bfin_read16(CAN_MB31_LENGTH)
+#define bfin_write_CAN_MB31_LENGTH(val) bfin_write16(CAN_MB31_LENGTH, val)
+#define bfin_read_CAN_MB31_TIMESTAMP() bfin_read16(CAN_MB31_TIMESTAMP)
+#define bfin_write_CAN_MB31_TIMESTAMP(val) bfin_write16(CAN_MB31_TIMESTAMP, val)
+#define bfin_read_CAN_MB31_ID0()       bfin_read16(CAN_MB31_ID0)
+#define bfin_write_CAN_MB31_ID0(val)   bfin_write16(CAN_MB31_ID0, val)
+#define bfin_read_CAN_MB31_ID1()       bfin_read16(CAN_MB31_ID1)
+#define bfin_write_CAN_MB31_ID1(val)   bfin_write16(CAN_MB31_ID1, val)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/cdefBF539.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/cdefBF539.h
new file mode 100644
index 0000000..acc15f3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/cdefBF539.h
@@ -0,0 +1,240 @@
+/*
+ * Copyright 2008-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _CDEF_BF539_H
+#define _CDEF_BF539_H
+
+/* Include MMRs Common to BF538 								*/
+#include "cdefBF538.h"
+
+#define bfin_read_MXVR_CONFIG()        bfin_read16(MXVR_CONFIG)
+#define bfin_write_MXVR_CONFIG(val)    bfin_write16(MXVR_CONFIG, val)
+#define bfin_read_MXVR_PLL_CTL_0()     bfin_read32(MXVR_PLL_CTL_0)
+#define bfin_write_MXVR_PLL_CTL_0(val) bfin_write32(MXVR_PLL_CTL_0, val)
+#define bfin_read_MXVR_STATE_0()       bfin_read32(MXVR_STATE_0)
+#define bfin_write_MXVR_STATE_0(val)   bfin_write32(MXVR_STATE_0, val)
+#define bfin_read_MXVR_STATE_1()       bfin_read32(MXVR_STATE_1)
+#define bfin_write_MXVR_STATE_1(val)   bfin_write32(MXVR_STATE_1, val)
+#define bfin_read_MXVR_INT_STAT_0()    bfin_read32(MXVR_INT_STAT_0)
+#define bfin_write_MXVR_INT_STAT_0(val) bfin_write32(MXVR_INT_STAT_0, val)
+#define bfin_read_MXVR_INT_STAT_1()    bfin_read32(MXVR_INT_STAT_1)
+#define bfin_write_MXVR_INT_STAT_1(val) bfin_write32(MXVR_INT_STAT_1, val)
+#define bfin_read_MXVR_INT_EN_0()      bfin_read32(MXVR_INT_EN_0)
+#define bfin_write_MXVR_INT_EN_0(val)  bfin_write32(MXVR_INT_EN_0, val)
+#define bfin_read_MXVR_INT_EN_1()      bfin_read32(MXVR_INT_EN_1)
+#define bfin_write_MXVR_INT_EN_1(val)  bfin_write32(MXVR_INT_EN_1, val)
+#define bfin_read_MXVR_POSITION()      bfin_read16(MXVR_POSITION)
+#define bfin_write_MXVR_POSITION(val)  bfin_write16(MXVR_POSITION, val)
+#define bfin_read_MXVR_MAX_POSITION()  bfin_read16(MXVR_MAX_POSITION)
+#define bfin_write_MXVR_MAX_POSITION(val) bfin_write16(MXVR_MAX_POSITION, val)
+#define bfin_read_MXVR_DELAY()         bfin_read16(MXVR_DELAY)
+#define bfin_write_MXVR_DELAY(val)     bfin_write16(MXVR_DELAY, val)
+#define bfin_read_MXVR_MAX_DELAY()     bfin_read16(MXVR_MAX_DELAY)
+#define bfin_write_MXVR_MAX_DELAY(val) bfin_write16(MXVR_MAX_DELAY, val)
+#define bfin_read_MXVR_LADDR()         bfin_read32(MXVR_LADDR)
+#define bfin_write_MXVR_LADDR(val)     bfin_write32(MXVR_LADDR, val)
+#define bfin_read_MXVR_GADDR()         bfin_read16(MXVR_GADDR)
+#define bfin_write_MXVR_GADDR(val)     bfin_write16(MXVR_GADDR, val)
+#define bfin_read_MXVR_AADDR()         bfin_read32(MXVR_AADDR)
+#define bfin_write_MXVR_AADDR(val)     bfin_write32(MXVR_AADDR, val)
+#define bfin_read_MXVR_ALLOC_0()       bfin_read32(MXVR_ALLOC_0)
+#define bfin_write_MXVR_ALLOC_0(val)   bfin_write32(MXVR_ALLOC_0, val)
+#define bfin_read_MXVR_ALLOC_1()       bfin_read32(MXVR_ALLOC_1)
+#define bfin_write_MXVR_ALLOC_1(val)   bfin_write32(MXVR_ALLOC_1, val)
+#define bfin_read_MXVR_ALLOC_2()       bfin_read32(MXVR_ALLOC_2)
+#define bfin_write_MXVR_ALLOC_2(val)   bfin_write32(MXVR_ALLOC_2, val)
+#define bfin_read_MXVR_ALLOC_3()       bfin_read32(MXVR_ALLOC_3)
+#define bfin_write_MXVR_ALLOC_3(val)   bfin_write32(MXVR_ALLOC_3, val)
+#define bfin_read_MXVR_ALLOC_4()       bfin_read32(MXVR_ALLOC_4)
+#define bfin_write_MXVR_ALLOC_4(val)   bfin_write32(MXVR_ALLOC_4, val)
+#define bfin_read_MXVR_ALLOC_5()       bfin_read32(MXVR_ALLOC_5)
+#define bfin_write_MXVR_ALLOC_5(val)   bfin_write32(MXVR_ALLOC_5, val)
+#define bfin_read_MXVR_ALLOC_6()       bfin_read32(MXVR_ALLOC_6)
+#define bfin_write_MXVR_ALLOC_6(val)   bfin_write32(MXVR_ALLOC_6, val)
+#define bfin_read_MXVR_ALLOC_7()       bfin_read32(MXVR_ALLOC_7)
+#define bfin_write_MXVR_ALLOC_7(val)   bfin_write32(MXVR_ALLOC_7, val)
+#define bfin_read_MXVR_ALLOC_8()       bfin_read32(MXVR_ALLOC_8)
+#define bfin_write_MXVR_ALLOC_8(val)   bfin_write32(MXVR_ALLOC_8, val)
+#define bfin_read_MXVR_ALLOC_9()       bfin_read32(MXVR_ALLOC_9)
+#define bfin_write_MXVR_ALLOC_9(val)   bfin_write32(MXVR_ALLOC_9, val)
+#define bfin_read_MXVR_ALLOC_10()      bfin_read32(MXVR_ALLOC_10)
+#define bfin_write_MXVR_ALLOC_10(val)  bfin_write32(MXVR_ALLOC_10, val)
+#define bfin_read_MXVR_ALLOC_11()      bfin_read32(MXVR_ALLOC_11)
+#define bfin_write_MXVR_ALLOC_11(val)  bfin_write32(MXVR_ALLOC_11, val)
+#define bfin_read_MXVR_ALLOC_12()      bfin_read32(MXVR_ALLOC_12)
+#define bfin_write_MXVR_ALLOC_12(val)  bfin_write32(MXVR_ALLOC_12, val)
+#define bfin_read_MXVR_ALLOC_13()      bfin_read32(MXVR_ALLOC_13)
+#define bfin_write_MXVR_ALLOC_13(val)  bfin_write32(MXVR_ALLOC_13, val)
+#define bfin_read_MXVR_ALLOC_14()      bfin_read32(MXVR_ALLOC_14)
+#define bfin_write_MXVR_ALLOC_14(val)  bfin_write32(MXVR_ALLOC_14, val)
+#define bfin_read_MXVR_SYNC_LCHAN_0()  bfin_read32(MXVR_SYNC_LCHAN_0)
+#define bfin_write_MXVR_SYNC_LCHAN_0(val) bfin_write32(MXVR_SYNC_LCHAN_0, val)
+#define bfin_read_MXVR_SYNC_LCHAN_1()  bfin_read32(MXVR_SYNC_LCHAN_1)
+#define bfin_write_MXVR_SYNC_LCHAN_1(val) bfin_write32(MXVR_SYNC_LCHAN_1, val)
+#define bfin_read_MXVR_SYNC_LCHAN_2()  bfin_read32(MXVR_SYNC_LCHAN_2)
+#define bfin_write_MXVR_SYNC_LCHAN_2(val) bfin_write32(MXVR_SYNC_LCHAN_2, val)
+#define bfin_read_MXVR_SYNC_LCHAN_3()  bfin_read32(MXVR_SYNC_LCHAN_3)
+#define bfin_write_MXVR_SYNC_LCHAN_3(val) bfin_write32(MXVR_SYNC_LCHAN_3, val)
+#define bfin_read_MXVR_SYNC_LCHAN_4()  bfin_read32(MXVR_SYNC_LCHAN_4)
+#define bfin_write_MXVR_SYNC_LCHAN_4(val) bfin_write32(MXVR_SYNC_LCHAN_4, val)
+#define bfin_read_MXVR_SYNC_LCHAN_5()  bfin_read32(MXVR_SYNC_LCHAN_5)
+#define bfin_write_MXVR_SYNC_LCHAN_5(val) bfin_write32(MXVR_SYNC_LCHAN_5, val)
+#define bfin_read_MXVR_SYNC_LCHAN_6()  bfin_read32(MXVR_SYNC_LCHAN_6)
+#define bfin_write_MXVR_SYNC_LCHAN_6(val) bfin_write32(MXVR_SYNC_LCHAN_6, val)
+#define bfin_read_MXVR_SYNC_LCHAN_7()  bfin_read32(MXVR_SYNC_LCHAN_7)
+#define bfin_write_MXVR_SYNC_LCHAN_7(val) bfin_write32(MXVR_SYNC_LCHAN_7, val)
+#define bfin_read_MXVR_DMA0_CONFIG()   bfin_read32(MXVR_DMA0_CONFIG)
+#define bfin_write_MXVR_DMA0_CONFIG(val) bfin_write32(MXVR_DMA0_CONFIG, val)
+#define bfin_read_MXVR_DMA0_START_ADDR() bfin_readPTR(MXVR_DMA0_START_ADDR)
+#define bfin_write_MXVR_DMA0_START_ADDR(val) bfin_writePTR(MXVR_DMA0_START_ADDR, val)
+#define bfin_read_MXVR_DMA0_COUNT()    bfin_read16(MXVR_DMA0_COUNT)
+#define bfin_write_MXVR_DMA0_COUNT(val) bfin_write16(MXVR_DMA0_COUNT, val)
+#define bfin_read_MXVR_DMA0_CURR_ADDR() bfin_readPTR(MXVR_DMA0_CURR_ADDR)
+#define bfin_write_MXVR_DMA0_CURR_ADDR(val) bfin_writePTR(MXVR_DMA0_CURR_ADDR, val)
+#define bfin_read_MXVR_DMA0_CURR_COUNT() bfin_read16(MXVR_DMA0_CURR_COUNT)
+#define bfin_write_MXVR_DMA0_CURR_COUNT(val) bfin_write16(MXVR_DMA0_CURR_COUNT, val)
+#define bfin_read_MXVR_DMA1_CONFIG()   bfin_read32(MXVR_DMA1_CONFIG)
+#define bfin_write_MXVR_DMA1_CONFIG(val) bfin_write32(MXVR_DMA1_CONFIG, val)
+#define bfin_read_MXVR_DMA1_START_ADDR() bfin_readPTR(MXVR_DMA1_START_ADDR)
+#define bfin_write_MXVR_DMA1_START_ADDR(val) bfin_writePTR(MXVR_DMA1_START_ADDR, val)
+#define bfin_read_MXVR_DMA1_COUNT()    bfin_read16(MXVR_DMA1_COUNT)
+#define bfin_write_MXVR_DMA1_COUNT(val) bfin_write16(MXVR_DMA1_COUNT, val)
+#define bfin_read_MXVR_DMA1_CURR_ADDR() bfin_readPTR(MXVR_DMA1_CURR_ADDR)
+#define bfin_write_MXVR_DMA1_CURR_ADDR(val) bfin_writePTR(MXVR_DMA1_CURR_ADDR, val)
+#define bfin_read_MXVR_DMA1_CURR_COUNT() bfin_read16(MXVR_DMA1_CURR_COUNT)
+#define bfin_write_MXVR_DMA1_CURR_COUNT(val) bfin_write16(MXVR_DMA1_CURR_COUNT, val)
+#define bfin_read_MXVR_DMA2_CONFIG()   bfin_read32(MXVR_DMA2_CONFIG)
+#define bfin_write_MXVR_DMA2_CONFIG(val) bfin_write32(MXVR_DMA2_CONFIG, val)
+#define bfin_read_MXVR_DMA2_START_ADDR() bfin_readPTR(MXVR_DMA2_START_ADDR)
+#define bfin_write_MXVR_DMA2_START_ADDR(val) bfin_writePTR(MXVR_DMA2_START_ADDR, val)
+#define bfin_read_MXVR_DMA2_COUNT()    bfin_read16(MXVR_DMA2_COUNT)
+#define bfin_write_MXVR_DMA2_COUNT(val) bfin_write16(MXVR_DMA2_COUNT, val)
+#define bfin_read_MXVR_DMA2_CURR_ADDR() bfin_readPTR(MXVR_DMA2_CURR_ADDR)
+#define bfin_write_MXVR_DMA2_CURR_ADDR(val) bfin_writePTR(MXVR_DMA2_CURR_ADDR, val)
+#define bfin_read_MXVR_DMA2_CURR_COUNT() bfin_read16(MXVR_DMA2_CURR_COUNT)
+#define bfin_write_MXVR_DMA2_CURR_COUNT(val) bfin_write16(MXVR_DMA2_CURR_COUNT, val)
+#define bfin_read_MXVR_DMA3_CONFIG()   bfin_read32(MXVR_DMA3_CONFIG)
+#define bfin_write_MXVR_DMA3_CONFIG(val) bfin_write32(MXVR_DMA3_CONFIG, val)
+#define bfin_read_MXVR_DMA3_START_ADDR() bfin_readPTR(MXVR_DMA3_START_ADDR)
+#define bfin_write_MXVR_DMA3_START_ADDR(val) bfin_writePTR(MXVR_DMA3_START_ADDR, val)
+#define bfin_read_MXVR_DMA3_COUNT()    bfin_read16(MXVR_DMA3_COUNT)
+#define bfin_write_MXVR_DMA3_COUNT(val) bfin_write16(MXVR_DMA3_COUNT, val)
+#define bfin_read_MXVR_DMA3_CURR_ADDR() bfin_readPTR(MXVR_DMA3_CURR_ADDR)
+#define bfin_write_MXVR_DMA3_CURR_ADDR(val) bfin_writePTR(MXVR_DMA3_CURR_ADDR, val)
+#define bfin_read_MXVR_DMA3_CURR_COUNT() bfin_read16(MXVR_DMA3_CURR_COUNT)
+#define bfin_write_MXVR_DMA3_CURR_COUNT(val) bfin_write16(MXVR_DMA3_CURR_COUNT, val)
+#define bfin_read_MXVR_DMA4_CONFIG()   bfin_read32(MXVR_DMA4_CONFIG)
+#define bfin_write_MXVR_DMA4_CONFIG(val) bfin_write32(MXVR_DMA4_CONFIG, val)
+#define bfin_read_MXVR_DMA4_START_ADDR() bfin_readPTR(MXVR_DMA4_START_ADDR)
+#define bfin_write_MXVR_DMA4_START_ADDR(val) bfin_writePTR(MXVR_DMA4_START_ADDR, val)
+#define bfin_read_MXVR_DMA4_COUNT()    bfin_read16(MXVR_DMA4_COUNT)
+#define bfin_write_MXVR_DMA4_COUNT(val) bfin_write16(MXVR_DMA4_COUNT, val)
+#define bfin_read_MXVR_DMA4_CURR_ADDR() bfin_readPTR(MXVR_DMA4_CURR_ADDR)
+#define bfin_write_MXVR_DMA4_CURR_ADDR(val) bfin_writePTR(MXVR_DMA4_CURR_ADDR, val)
+#define bfin_read_MXVR_DMA4_CURR_COUNT() bfin_read16(MXVR_DMA4_CURR_COUNT)
+#define bfin_write_MXVR_DMA4_CURR_COUNT(val) bfin_write16(MXVR_DMA4_CURR_COUNT, val)
+#define bfin_read_MXVR_DMA5_CONFIG()   bfin_read32(MXVR_DMA5_CONFIG)
+#define bfin_write_MXVR_DMA5_CONFIG(val) bfin_write32(MXVR_DMA5_CONFIG, val)
+#define bfin_read_MXVR_DMA5_START_ADDR() bfin_readPTR(MXVR_DMA5_START_ADDR)
+#define bfin_write_MXVR_DMA5_START_ADDR(val) bfin_writePTR(MXVR_DMA5_START_ADDR, val)
+#define bfin_read_MXVR_DMA5_COUNT()    bfin_read16(MXVR_DMA5_COUNT)
+#define bfin_write_MXVR_DMA5_COUNT(val) bfin_write16(MXVR_DMA5_COUNT, val)
+#define bfin_read_MXVR_DMA5_CURR_ADDR() bfin_readPTR(MXVR_DMA5_CURR_ADDR)
+#define bfin_write_MXVR_DMA5_CURR_ADDR(val) bfin_writePTR(MXVR_DMA5_CURR_ADDR, val)
+#define bfin_read_MXVR_DMA5_CURR_COUNT() bfin_read16(MXVR_DMA5_CURR_COUNT)
+#define bfin_write_MXVR_DMA5_CURR_COUNT(val) bfin_write16(MXVR_DMA5_CURR_COUNT, val)
+#define bfin_read_MXVR_DMA6_CONFIG()   bfin_read32(MXVR_DMA6_CONFIG)
+#define bfin_write_MXVR_DMA6_CONFIG(val) bfin_write32(MXVR_DMA6_CONFIG, val)
+#define bfin_read_MXVR_DMA6_START_ADDR() bfin_readPTR(MXVR_DMA6_START_ADDR)
+#define bfin_write_MXVR_DMA6_START_ADDR(val) bfin_writePTR(MXVR_DMA6_START_ADDR, val)
+#define bfin_read_MXVR_DMA6_COUNT()    bfin_read16(MXVR_DMA6_COUNT)
+#define bfin_write_MXVR_DMA6_COUNT(val) bfin_write16(MXVR_DMA6_COUNT, val)
+#define bfin_read_MXVR_DMA6_CURR_ADDR() bfin_readPTR(MXVR_DMA6_CURR_ADDR)
+#define bfin_write_MXVR_DMA6_CURR_ADDR(val) bfin_writePTR(MXVR_DMA6_CURR_ADDR, val)
+#define bfin_read_MXVR_DMA6_CURR_COUNT() bfin_read16(MXVR_DMA6_CURR_COUNT)
+#define bfin_write_MXVR_DMA6_CURR_COUNT(val) bfin_write16(MXVR_DMA6_CURR_COUNT, val)
+#define bfin_read_MXVR_DMA7_CONFIG()   bfin_read32(MXVR_DMA7_CONFIG)
+#define bfin_write_MXVR_DMA7_CONFIG(val) bfin_write32(MXVR_DMA7_CONFIG, val)
+#define bfin_read_MXVR_DMA7_START_ADDR() bfin_readPTR(MXVR_DMA7_START_ADDR)
+#define bfin_write_MXVR_DMA7_START_ADDR(val) bfin_writePTR(MXVR_DMA7_START_ADDR, val)
+#define bfin_read_MXVR_DMA7_COUNT()    bfin_read16(MXVR_DMA7_COUNT)
+#define bfin_write_MXVR_DMA7_COUNT(val) bfin_write16(MXVR_DMA7_COUNT, val)
+#define bfin_read_MXVR_DMA7_CURR_ADDR() bfin_readPTR(MXVR_DMA7_CURR_ADDR)
+#define bfin_write_MXVR_DMA7_CURR_ADDR(val) bfin_writePTR(MXVR_DMA7_CURR_ADDR, val)
+#define bfin_read_MXVR_DMA7_CURR_COUNT() bfin_read16(MXVR_DMA7_CURR_COUNT)
+#define bfin_write_MXVR_DMA7_CURR_COUNT(val) bfin_write16(MXVR_DMA7_CURR_COUNT, val)
+#define bfin_read_MXVR_AP_CTL()        bfin_read16(MXVR_AP_CTL)
+#define bfin_write_MXVR_AP_CTL(val)    bfin_write16(MXVR_AP_CTL, val)
+#define bfin_read_MXVR_APRB_START_ADDR() bfin_readPTR(MXVR_APRB_START_ADDR)
+#define bfin_write_MXVR_APRB_START_ADDR(val) bfin_writePTR(MXVR_APRB_START_ADDR, val)
+#define bfin_read_MXVR_APRB_CURR_ADDR() bfin_readPTR(MXVR_APRB_CURR_ADDR)
+#define bfin_write_MXVR_APRB_CURR_ADDR(val) bfin_writePTR(MXVR_APRB_CURR_ADDR, val)
+#define bfin_read_MXVR_APTB_START_ADDR() bfin_readPTR(MXVR_APTB_START_ADDR)
+#define bfin_write_MXVR_APTB_START_ADDR(val) bfin_writePTR(MXVR_APTB_START_ADDR, val)
+#define bfin_read_MXVR_APTB_CURR_ADDR() bfin_readPTR(MXVR_APTB_CURR_ADDR)
+#define bfin_write_MXVR_APTB_CURR_ADDR(val) bfin_writePTR(MXVR_APTB_CURR_ADDR, val)
+#define bfin_read_MXVR_CM_CTL()        bfin_read32(MXVR_CM_CTL)
+#define bfin_write_MXVR_CM_CTL(val)    bfin_write32(MXVR_CM_CTL, val)
+#define bfin_read_MXVR_CMRB_START_ADDR() bfin_readPTR(MXVR_CMRB_START_ADDR)
+#define bfin_write_MXVR_CMRB_START_ADDR(val) bfin_writePTR(MXVR_CMRB_START_ADDR, val)
+#define bfin_read_MXVR_CMRB_CURR_ADDR() bfin_readPTR(MXVR_CMRB_CURR_ADDR)
+#define bfin_write_MXVR_CMRB_CURR_ADDR(val) bfin_writePTR(MXVR_CMRB_CURR_ADDR, val)
+#define bfin_read_MXVR_CMTB_START_ADDR() bfin_readPTR(MXVR_CMTB_START_ADDR)
+#define bfin_write_MXVR_CMTB_START_ADDR(val) bfin_writePTR(MXVR_CMTB_START_ADDR, val)
+#define bfin_read_MXVR_CMTB_CURR_ADDR() bfin_readPTR(MXVR_CMTB_CURR_ADDR)
+#define bfin_write_MXVR_CMTB_CURR_ADDR(val) bfin_writePTR(MXVR_CMTB_CURR_ADDR, val)
+#define bfin_read_MXVR_RRDB_START_ADDR() bfin_readPTR(MXVR_RRDB_START_ADDR)
+#define bfin_write_MXVR_RRDB_START_ADDR(val) bfin_writePTR(MXVR_RRDB_START_ADDR, val)
+#define bfin_read_MXVR_RRDB_CURR_ADDR() bfin_readPTR(MXVR_RRDB_CURR_ADDR)
+#define bfin_write_MXVR_RRDB_CURR_ADDR(val) bfin_writePTR(MXVR_RRDB_CURR_ADDR, val)
+#define bfin_read_MXVR_PAT_DATA_0()    bfin_read32(MXVR_PAT_DATA_0)
+#define bfin_write_MXVR_PAT_DATA_0(val) bfin_write32(MXVR_PAT_DATA_0, val)
+#define bfin_read_MXVR_PAT_EN_0()      bfin_read32(MXVR_PAT_EN_0)
+#define bfin_write_MXVR_PAT_EN_0(val)  bfin_write32(MXVR_PAT_EN_0, val)
+#define bfin_read_MXVR_PAT_DATA_1()    bfin_read32(MXVR_PAT_DATA_1)
+#define bfin_write_MXVR_PAT_DATA_1(val) bfin_write32(MXVR_PAT_DATA_1, val)
+#define bfin_read_MXVR_PAT_EN_1()      bfin_read32(MXVR_PAT_EN_1)
+#define bfin_write_MXVR_PAT_EN_1(val)  bfin_write32(MXVR_PAT_EN_1, val)
+#define bfin_read_MXVR_FRAME_CNT_0()   bfin_read16(MXVR_FRAME_CNT_0)
+#define bfin_write_MXVR_FRAME_CNT_0(val) bfin_write16(MXVR_FRAME_CNT_0, val)
+#define bfin_read_MXVR_FRAME_CNT_1()   bfin_read16(MXVR_FRAME_CNT_1)
+#define bfin_write_MXVR_FRAME_CNT_1(val) bfin_write16(MXVR_FRAME_CNT_1, val)
+#define bfin_read_MXVR_ROUTING_0()     bfin_read32(MXVR_ROUTING_0)
+#define bfin_write_MXVR_ROUTING_0(val) bfin_write32(MXVR_ROUTING_0, val)
+#define bfin_read_MXVR_ROUTING_1()     bfin_read32(MXVR_ROUTING_1)
+#define bfin_write_MXVR_ROUTING_1(val) bfin_write32(MXVR_ROUTING_1, val)
+#define bfin_read_MXVR_ROUTING_2()     bfin_read32(MXVR_ROUTING_2)
+#define bfin_write_MXVR_ROUTING_2(val) bfin_write32(MXVR_ROUTING_2, val)
+#define bfin_read_MXVR_ROUTING_3()     bfin_read32(MXVR_ROUTING_3)
+#define bfin_write_MXVR_ROUTING_3(val) bfin_write32(MXVR_ROUTING_3, val)
+#define bfin_read_MXVR_ROUTING_4()     bfin_read32(MXVR_ROUTING_4)
+#define bfin_write_MXVR_ROUTING_4(val) bfin_write32(MXVR_ROUTING_4, val)
+#define bfin_read_MXVR_ROUTING_5()     bfin_read32(MXVR_ROUTING_5)
+#define bfin_write_MXVR_ROUTING_5(val) bfin_write32(MXVR_ROUTING_5, val)
+#define bfin_read_MXVR_ROUTING_6()     bfin_read32(MXVR_ROUTING_6)
+#define bfin_write_MXVR_ROUTING_6(val) bfin_write32(MXVR_ROUTING_6, val)
+#define bfin_read_MXVR_ROUTING_7()     bfin_read32(MXVR_ROUTING_7)
+#define bfin_write_MXVR_ROUTING_7(val) bfin_write32(MXVR_ROUTING_7, val)
+#define bfin_read_MXVR_ROUTING_8()     bfin_read32(MXVR_ROUTING_8)
+#define bfin_write_MXVR_ROUTING_8(val) bfin_write32(MXVR_ROUTING_8, val)
+#define bfin_read_MXVR_ROUTING_9()     bfin_read32(MXVR_ROUTING_9)
+#define bfin_write_MXVR_ROUTING_9(val) bfin_write32(MXVR_ROUTING_9, val)
+#define bfin_read_MXVR_ROUTING_10()    bfin_read32(MXVR_ROUTING_10)
+#define bfin_write_MXVR_ROUTING_10(val) bfin_write32(MXVR_ROUTING_10, val)
+#define bfin_read_MXVR_ROUTING_11()    bfin_read32(MXVR_ROUTING_11)
+#define bfin_write_MXVR_ROUTING_11(val) bfin_write32(MXVR_ROUTING_11, val)
+#define bfin_read_MXVR_ROUTING_12()    bfin_read32(MXVR_ROUTING_12)
+#define bfin_write_MXVR_ROUTING_12(val) bfin_write32(MXVR_ROUTING_12, val)
+#define bfin_read_MXVR_ROUTING_13()    bfin_read32(MXVR_ROUTING_13)
+#define bfin_write_MXVR_ROUTING_13(val) bfin_write32(MXVR_ROUTING_13, val)
+#define bfin_read_MXVR_ROUTING_14()    bfin_read32(MXVR_ROUTING_14)
+#define bfin_write_MXVR_ROUTING_14(val) bfin_write32(MXVR_ROUTING_14, val)
+#define bfin_read_MXVR_PLL_CTL_1()     bfin_read32(MXVR_PLL_CTL_1)
+#define bfin_write_MXVR_PLL_CTL_1(val) bfin_write32(MXVR_PLL_CTL_1, val)
+#define bfin_read_MXVR_BLOCK_CNT()     bfin_read16(MXVR_BLOCK_CNT)
+#define bfin_write_MXVR_BLOCK_CNT(val) bfin_write16(MXVR_BLOCK_CNT, val)
+
+#endif /* _CDEF_BF539_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/defBF538.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/defBF538.h
new file mode 100644
index 0000000..876a770
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/defBF538.h
@@ -0,0 +1,1749 @@
+/*
+ * Copyright 2008-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF538_H
+#define _DEF_BF538_H
+
+/* Clock/Regulator Control (0xFFC00000 - 0xFFC000FF) */
+#define	PLL_CTL			0xFFC00000	/* PLL Control register (16-bit) */
+#define	PLL_DIV			0xFFC00004	/* PLL Divide Register (16-bit) */
+#define	VR_CTL			0xFFC00008	/* Voltage Regulator Control Register (16-bit) */
+#define	PLL_STAT		0xFFC0000C	/* PLL Status register (16-bit) */
+#define	PLL_LOCKCNT		0xFFC00010	/* PLL Lock	Count register (16-bit) */
+#define	CHIPID			0xFFC00014	/* Chip	ID Register */
+
+/* CHIPID Masks */
+#define CHIPID_VERSION         0xF0000000
+#define CHIPID_FAMILY          0x0FFFF000
+#define CHIPID_MANUFACTURE     0x00000FFE
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
+#define	SWRST			0xFFC00100  /* Software	Reset Register (16-bit) */
+#define	SYSCR			0xFFC00104  /* System Configuration registe */
+#define	SIC_RVECT		0xFFC00108
+#define	SIC_IMASK0		0xFFC0010C  /* Interrupt Mask Register */
+#define	SIC_IAR0		0xFFC00110  /* Interrupt Assignment Register 0 */
+#define	SIC_IAR1		0xFFC00114  /* Interrupt Assignment Register 1 */
+#define	SIC_IAR2		0xFFC00118  /* Interrupt Assignment Register 2 */
+#define	SIC_IAR3			0xFFC0011C	/* Interrupt Assignment	Register 3 */
+#define	SIC_ISR0			0xFFC00120  /* Interrupt Status	Register */
+#define	SIC_IWR0			0xFFC00124  /* Interrupt Wakeup	Register */
+#define	SIC_IMASK1			0xFFC00128	/* Interrupt Mask Register 1 */
+#define	SIC_ISR1			0xFFC0012C	/* Interrupt Status Register 1 */
+#define	SIC_IWR1			0xFFC00130	/* Interrupt Wakeup Register 1 */
+#define	SIC_IAR4			0xFFC00134	/* Interrupt Assignment	Register 4 */
+#define	SIC_IAR5			0xFFC00138	/* Interrupt Assignment	Register 5 */
+#define	SIC_IAR6			0xFFC0013C	/* Interrupt Assignment	Register 6 */
+
+
+/* Watchdog Timer (0xFFC00200 -	0xFFC002FF) */
+#define	WDOG_CTL	0xFFC00200  /* Watchdog	Control	Register */
+#define	WDOG_CNT	0xFFC00204  /* Watchdog	Count Register */
+#define	WDOG_STAT	0xFFC00208  /* Watchdog	Status Register */
+
+
+/* Real	Time Clock (0xFFC00300 - 0xFFC003FF) */
+#define	RTC_STAT	0xFFC00300  /* RTC Status Register */
+#define	RTC_ICTL	0xFFC00304  /* RTC Interrupt Control Register */
+#define	RTC_ISTAT	0xFFC00308  /* RTC Interrupt Status Register */
+#define	RTC_SWCNT	0xFFC0030C  /* RTC Stopwatch Count Register */
+#define	RTC_ALARM	0xFFC00310  /* RTC Alarm Time Register */
+#define	RTC_FAST	0xFFC00314  /* RTC Prescaler Enable Register */
+#define	RTC_PREN		0xFFC00314  /* RTC Prescaler Enable Register (alternate	macro) */
+
+
+/* UART0 Controller (0xFFC00400	- 0xFFC004FF) */
+#define	UART0_THR	      0xFFC00400  /* Transmit Holding register */
+#define	UART0_RBR	      0xFFC00400  /* Receive Buffer register */
+#define	UART0_DLL	      0xFFC00400  /* Divisor Latch (Low-Byte) */
+#define	UART0_IER	      0xFFC00404  /* Interrupt Enable Register */
+#define	UART0_DLH	      0xFFC00404  /* Divisor Latch (High-Byte) */
+#define	UART0_IIR	      0xFFC00408  /* Interrupt Identification Register */
+#define	UART0_LCR	      0xFFC0040C  /* Line Control Register */
+#define	UART0_MCR			 0xFFC00410  /*	Modem Control Register */
+#define	UART0_LSR	      0xFFC00414  /* Line Status Register */
+#define	UART0_SCR	      0xFFC0041C  /* SCR Scratch Register */
+#define	UART0_GCTL		     0xFFC00424	 /* Global Control Register */
+
+
+/* SPI0	Controller (0xFFC00500 - 0xFFC005FF) */
+
+#define	SPI0_CTL			0xFFC00500  /* SPI0 Control Register */
+#define	SPI0_FLG			0xFFC00504  /* SPI0 Flag register */
+#define	SPI0_STAT			0xFFC00508  /* SPI0 Status register */
+#define	SPI0_TDBR			0xFFC0050C  /* SPI0 Transmit Data Buffer Register */
+#define	SPI0_RDBR			0xFFC00510  /* SPI0 Receive Data Buffer	Register */
+#define	SPI0_BAUD			0xFFC00514  /* SPI0 Baud rate Register */
+#define	SPI0_SHADOW			0xFFC00518  /* SPI0_RDBR Shadow	Register */
+#define SPI0_REGBASE			SPI0_CTL
+
+
+/* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */
+#define	TIMER0_CONFIG			0xFFC00600     /* Timer	0 Configuration	Register */
+#define	TIMER0_COUNTER				0xFFC00604     /* Timer	0 Counter Register */
+#define	TIMER0_PERIOD			0xFFC00608     /* Timer	0 Period Register */
+#define	TIMER0_WIDTH			0xFFC0060C     /* Timer	0 Width	Register */
+
+#define	TIMER1_CONFIG			0xFFC00610	/*  Timer 1 Configuration Register   */
+#define	TIMER1_COUNTER			0xFFC00614	/*  Timer 1 Counter Register	     */
+#define	TIMER1_PERIOD			0xFFC00618	/*  Timer 1 Period Register	     */
+#define	TIMER1_WIDTH			0xFFC0061C	/*  Timer 1 Width Register	     */
+
+#define	TIMER2_CONFIG			0xFFC00620	/* Timer 2 Configuration Register   */
+#define	TIMER2_COUNTER			0xFFC00624	/* Timer 2 Counter Register	    */
+#define	TIMER2_PERIOD			0xFFC00628	/* Timer 2 Period Register	    */
+#define	TIMER2_WIDTH			0xFFC0062C	/* Timer 2 Width Register	    */
+
+#define	TIMER_ENABLE				0xFFC00640	/* Timer Enable	Register */
+#define	TIMER_DISABLE				0xFFC00644	/* Timer Disable Register */
+#define	TIMER_STATUS				0xFFC00648	/* Timer Status	Register */
+
+
+/* Programmable	Flags (0xFFC00700 - 0xFFC007FF) */
+#define	FIO_FLAG_D				0xFFC00700  /* Flag Mask to directly specify state of pins */
+#define	FIO_FLAG_C			0xFFC00704  /* Peripheral Interrupt Flag Register (clear) */
+#define	FIO_FLAG_S			0xFFC00708  /* Peripheral Interrupt Flag Register (set) */
+#define	FIO_FLAG_T					0xFFC0070C  /* Flag Mask to directly toggle state of pins */
+#define	FIO_MASKA_D			0xFFC00710  /* Flag Mask Interrupt A Register (set directly) */
+#define	FIO_MASKA_C			0xFFC00714  /* Flag Mask Interrupt A Register (clear) */
+#define	FIO_MASKA_S			0xFFC00718  /* Flag Mask Interrupt A Register (set) */
+#define	FIO_MASKA_T			0xFFC0071C  /* Flag Mask Interrupt A Register (toggle) */
+#define	FIO_MASKB_D			0xFFC00720  /* Flag Mask Interrupt B Register (set directly) */
+#define	FIO_MASKB_C			0xFFC00724  /* Flag Mask Interrupt B Register (clear) */
+#define	FIO_MASKB_S			0xFFC00728  /* Flag Mask Interrupt B Register (set) */
+#define	FIO_MASKB_T			0xFFC0072C  /* Flag Mask Interrupt B Register (toggle) */
+#define	FIO_DIR				0xFFC00730  /* Peripheral Flag Direction Register */
+#define	FIO_POLAR			0xFFC00734  /* Flag Source Polarity Register */
+#define	FIO_EDGE			0xFFC00738  /* Flag Source Sensitivity Register */
+#define	FIO_BOTH			0xFFC0073C  /* Flag Set	on BOTH	Edges Register */
+#define	FIO_INEN					0xFFC00740  /* Flag Input Enable Register  */
+
+
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define	SPORT0_TCR1				0xFFC00800  /* SPORT0 Transmit Configuration 1 Register */
+#define	SPORT0_TCR2				0xFFC00804  /* SPORT0 Transmit Configuration 2 Register */
+#define	SPORT0_TCLKDIV			0xFFC00808  /* SPORT0 Transmit Clock Divider */
+#define	SPORT0_TFSDIV			0xFFC0080C  /* SPORT0 Transmit Frame Sync Divider */
+#define	SPORT0_TX			0xFFC00810  /* SPORT0 TX Data Register */
+#define	SPORT0_RX			0xFFC00818  /* SPORT0 RX Data Register */
+#define	SPORT0_RCR1				0xFFC00820  /* SPORT0 Transmit Configuration 1 Register */
+#define	SPORT0_RCR2				0xFFC00824  /* SPORT0 Transmit Configuration 2 Register */
+#define	SPORT0_RCLKDIV			0xFFC00828  /* SPORT0 Receive Clock Divider */
+#define	SPORT0_RFSDIV			0xFFC0082C  /* SPORT0 Receive Frame Sync Divider */
+#define	SPORT0_STAT			0xFFC00830  /* SPORT0 Status Register */
+#define	SPORT0_CHNL			0xFFC00834  /* SPORT0 Current Channel Register */
+#define	SPORT0_MCMC1			0xFFC00838  /* SPORT0 Multi-Channel Configuration Register 1 */
+#define	SPORT0_MCMC2			0xFFC0083C  /* SPORT0 Multi-Channel Configuration Register 2 */
+#define	SPORT0_MTCS0			0xFFC00840  /* SPORT0 Multi-Channel Transmit Select Register 0 */
+#define	SPORT0_MTCS1			0xFFC00844  /* SPORT0 Multi-Channel Transmit Select Register 1 */
+#define	SPORT0_MTCS2			0xFFC00848  /* SPORT0 Multi-Channel Transmit Select Register 2 */
+#define	SPORT0_MTCS3			0xFFC0084C  /* SPORT0 Multi-Channel Transmit Select Register 3 */
+#define	SPORT0_MRCS0			0xFFC00850  /* SPORT0 Multi-Channel Receive Select Register 0 */
+#define	SPORT0_MRCS1			0xFFC00854  /* SPORT0 Multi-Channel Receive Select Register 1 */
+#define	SPORT0_MRCS2			0xFFC00858  /* SPORT0 Multi-Channel Receive Select Register 2 */
+#define	SPORT0_MRCS3			0xFFC0085C  /* SPORT0 Multi-Channel Receive Select Register 3 */
+
+
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define	SPORT1_TCR1				0xFFC00900  /* SPORT1 Transmit Configuration 1 Register */
+#define	SPORT1_TCR2				0xFFC00904  /* SPORT1 Transmit Configuration 2 Register */
+#define	SPORT1_TCLKDIV			0xFFC00908  /* SPORT1 Transmit Clock Divider */
+#define	SPORT1_TFSDIV			0xFFC0090C  /* SPORT1 Transmit Frame Sync Divider */
+#define	SPORT1_TX			0xFFC00910  /* SPORT1 TX Data Register */
+#define	SPORT1_RX			0xFFC00918  /* SPORT1 RX Data Register */
+#define	SPORT1_RCR1				0xFFC00920  /* SPORT1 Transmit Configuration 1 Register */
+#define	SPORT1_RCR2				0xFFC00924  /* SPORT1 Transmit Configuration 2 Register */
+#define	SPORT1_RCLKDIV			0xFFC00928  /* SPORT1 Receive Clock Divider */
+#define	SPORT1_RFSDIV			0xFFC0092C  /* SPORT1 Receive Frame Sync Divider */
+#define	SPORT1_STAT			0xFFC00930  /* SPORT1 Status Register */
+#define	SPORT1_CHNL			0xFFC00934  /* SPORT1 Current Channel Register */
+#define	SPORT1_MCMC1			0xFFC00938  /* SPORT1 Multi-Channel Configuration Register 1 */
+#define	SPORT1_MCMC2			0xFFC0093C  /* SPORT1 Multi-Channel Configuration Register 2 */
+#define	SPORT1_MTCS0			0xFFC00940  /* SPORT1 Multi-Channel Transmit Select Register 0 */
+#define	SPORT1_MTCS1			0xFFC00944  /* SPORT1 Multi-Channel Transmit Select Register 1 */
+#define	SPORT1_MTCS2			0xFFC00948  /* SPORT1 Multi-Channel Transmit Select Register 2 */
+#define	SPORT1_MTCS3			0xFFC0094C  /* SPORT1 Multi-Channel Transmit Select Register 3 */
+#define	SPORT1_MRCS0			0xFFC00950  /* SPORT1 Multi-Channel Receive Select Register 0 */
+#define	SPORT1_MRCS1			0xFFC00954  /* SPORT1 Multi-Channel Receive Select Register 1 */
+#define	SPORT1_MRCS2			0xFFC00958  /* SPORT1 Multi-Channel Receive Select Register 2 */
+#define	SPORT1_MRCS3			0xFFC0095C  /* SPORT1 Multi-Channel Receive Select Register 3 */
+
+
+/* External Bus	Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+/* Asynchronous	Memory Controller  */
+#define	EBIU_AMGCTL			0xFFC00A00  /* Asynchronous Memory Global Control Register */
+#define	EBIU_AMBCTL0		0xFFC00A04  /* Asynchronous Memory Bank	Control	Register 0 */
+#define	EBIU_AMBCTL1		0xFFC00A08  /* Asynchronous Memory Bank	Control	Register 1 */
+
+/* SDRAM Controller */
+#define	EBIU_SDGCTL			0xFFC00A10  /* SDRAM Global Control Register */
+#define	EBIU_SDBCTL			0xFFC00A14  /* SDRAM Bank Control Register */
+#define	EBIU_SDRRC			0xFFC00A18  /* SDRAM Refresh Rate Control Register */
+#define	EBIU_SDSTAT			0xFFC00A1C  /* SDRAM Status Register */
+
+
+
+/* DMA Controller 0 Traffic Control Registers (0xFFC00B00 - 0xFFC00BFF) */
+
+#define	DMAC0_TC_PER			0xFFC00B0C	/* DMA Controller 0 Traffic Control Periods Register */
+#define	DMAC0_TC_CNT			0xFFC00B10	/* DMA Controller 0 Traffic Control Current Counts Register */
+
+
+
+/* DMA Controller 0 (0xFFC00C00	- 0xFFC00FFF)							 */
+
+#define	DMA0_NEXT_DESC_PTR		0xFFC00C00	/* DMA Channel 0 Next Descriptor Pointer Register */
+#define	DMA0_START_ADDR			0xFFC00C04	/* DMA Channel 0 Start Address Register */
+#define	DMA0_CONFIG				0xFFC00C08	/* DMA Channel 0 Configuration Register */
+#define	DMA0_X_COUNT			0xFFC00C10	/* DMA Channel 0 X Count Register */
+#define	DMA0_X_MODIFY			0xFFC00C14	/* DMA Channel 0 X Modify Register */
+#define	DMA0_Y_COUNT			0xFFC00C18	/* DMA Channel 0 Y Count Register */
+#define	DMA0_Y_MODIFY			0xFFC00C1C	/* DMA Channel 0 Y Modify Register */
+#define	DMA0_CURR_DESC_PTR		0xFFC00C20	/* DMA Channel 0 Current Descriptor Pointer Register */
+#define	DMA0_CURR_ADDR			0xFFC00C24	/* DMA Channel 0 Current Address Register */
+#define	DMA0_IRQ_STATUS			0xFFC00C28	/* DMA Channel 0 Interrupt/Status Register */
+#define	DMA0_PERIPHERAL_MAP		0xFFC00C2C	/* DMA Channel 0 Peripheral Map	Register */
+#define	DMA0_CURR_X_COUNT		0xFFC00C30	/* DMA Channel 0 Current X Count Register */
+#define	DMA0_CURR_Y_COUNT		0xFFC00C38	/* DMA Channel 0 Current Y Count Register */
+
+#define	DMA1_NEXT_DESC_PTR		0xFFC00C40	/* DMA Channel 1 Next Descriptor Pointer Register */
+#define	DMA1_START_ADDR			0xFFC00C44	/* DMA Channel 1 Start Address Register */
+#define	DMA1_CONFIG				0xFFC00C48	/* DMA Channel 1 Configuration Register */
+#define	DMA1_X_COUNT			0xFFC00C50	/* DMA Channel 1 X Count Register */
+#define	DMA1_X_MODIFY			0xFFC00C54	/* DMA Channel 1 X Modify Register */
+#define	DMA1_Y_COUNT			0xFFC00C58	/* DMA Channel 1 Y Count Register */
+#define	DMA1_Y_MODIFY			0xFFC00C5C	/* DMA Channel 1 Y Modify Register */
+#define	DMA1_CURR_DESC_PTR		0xFFC00C60	/* DMA Channel 1 Current Descriptor Pointer Register */
+#define	DMA1_CURR_ADDR			0xFFC00C64	/* DMA Channel 1 Current Address Register */
+#define	DMA1_IRQ_STATUS			0xFFC00C68	/* DMA Channel 1 Interrupt/Status Register */
+#define	DMA1_PERIPHERAL_MAP		0xFFC00C6C	/* DMA Channel 1 Peripheral Map	Register */
+#define	DMA1_CURR_X_COUNT		0xFFC00C70	/* DMA Channel 1 Current X Count Register */
+#define	DMA1_CURR_Y_COUNT		0xFFC00C78	/* DMA Channel 1 Current Y Count Register */
+
+#define	DMA2_NEXT_DESC_PTR		0xFFC00C80	/* DMA Channel 2 Next Descriptor Pointer Register */
+#define	DMA2_START_ADDR			0xFFC00C84	/* DMA Channel 2 Start Address Register */
+#define	DMA2_CONFIG				0xFFC00C88	/* DMA Channel 2 Configuration Register */
+#define	DMA2_X_COUNT			0xFFC00C90	/* DMA Channel 2 X Count Register */
+#define	DMA2_X_MODIFY			0xFFC00C94	/* DMA Channel 2 X Modify Register */
+#define	DMA2_Y_COUNT			0xFFC00C98	/* DMA Channel 2 Y Count Register */
+#define	DMA2_Y_MODIFY			0xFFC00C9C	/* DMA Channel 2 Y Modify Register */
+#define	DMA2_CURR_DESC_PTR		0xFFC00CA0	/* DMA Channel 2 Current Descriptor Pointer Register */
+#define	DMA2_CURR_ADDR			0xFFC00CA4	/* DMA Channel 2 Current Address Register */
+#define	DMA2_IRQ_STATUS			0xFFC00CA8	/* DMA Channel 2 Interrupt/Status Register */
+#define	DMA2_PERIPHERAL_MAP		0xFFC00CAC	/* DMA Channel 2 Peripheral Map	Register */
+#define	DMA2_CURR_X_COUNT		0xFFC00CB0	/* DMA Channel 2 Current X Count Register */
+#define	DMA2_CURR_Y_COUNT		0xFFC00CB8	/* DMA Channel 2 Current Y Count Register */
+
+#define	DMA3_NEXT_DESC_PTR		0xFFC00CC0	/* DMA Channel 3 Next Descriptor Pointer Register */
+#define	DMA3_START_ADDR			0xFFC00CC4	/* DMA Channel 3 Start Address Register */
+#define	DMA3_CONFIG				0xFFC00CC8	/* DMA Channel 3 Configuration Register */
+#define	DMA3_X_COUNT			0xFFC00CD0	/* DMA Channel 3 X Count Register */
+#define	DMA3_X_MODIFY			0xFFC00CD4	/* DMA Channel 3 X Modify Register */
+#define	DMA3_Y_COUNT			0xFFC00CD8	/* DMA Channel 3 Y Count Register */
+#define	DMA3_Y_MODIFY			0xFFC00CDC	/* DMA Channel 3 Y Modify Register */
+#define	DMA3_CURR_DESC_PTR		0xFFC00CE0	/* DMA Channel 3 Current Descriptor Pointer Register */
+#define	DMA3_CURR_ADDR			0xFFC00CE4	/* DMA Channel 3 Current Address Register */
+#define	DMA3_IRQ_STATUS			0xFFC00CE8	/* DMA Channel 3 Interrupt/Status Register */
+#define	DMA3_PERIPHERAL_MAP		0xFFC00CEC	/* DMA Channel 3 Peripheral Map	Register */
+#define	DMA3_CURR_X_COUNT		0xFFC00CF0	/* DMA Channel 3 Current X Count Register */
+#define	DMA3_CURR_Y_COUNT		0xFFC00CF8	/* DMA Channel 3 Current Y Count Register */
+
+#define	DMA4_NEXT_DESC_PTR		0xFFC00D00	/* DMA Channel 4 Next Descriptor Pointer Register */
+#define	DMA4_START_ADDR			0xFFC00D04	/* DMA Channel 4 Start Address Register */
+#define	DMA4_CONFIG				0xFFC00D08	/* DMA Channel 4 Configuration Register */
+#define	DMA4_X_COUNT			0xFFC00D10	/* DMA Channel 4 X Count Register */
+#define	DMA4_X_MODIFY			0xFFC00D14	/* DMA Channel 4 X Modify Register */
+#define	DMA4_Y_COUNT			0xFFC00D18	/* DMA Channel 4 Y Count Register */
+#define	DMA4_Y_MODIFY			0xFFC00D1C	/* DMA Channel 4 Y Modify Register */
+#define	DMA4_CURR_DESC_PTR		0xFFC00D20	/* DMA Channel 4 Current Descriptor Pointer Register */
+#define	DMA4_CURR_ADDR			0xFFC00D24	/* DMA Channel 4 Current Address Register */
+#define	DMA4_IRQ_STATUS			0xFFC00D28	/* DMA Channel 4 Interrupt/Status Register */
+#define	DMA4_PERIPHERAL_MAP		0xFFC00D2C	/* DMA Channel 4 Peripheral Map	Register */
+#define	DMA4_CURR_X_COUNT		0xFFC00D30	/* DMA Channel 4 Current X Count Register */
+#define	DMA4_CURR_Y_COUNT		0xFFC00D38	/* DMA Channel 4 Current Y Count Register */
+
+#define	DMA5_NEXT_DESC_PTR		0xFFC00D40	/* DMA Channel 5 Next Descriptor Pointer Register */
+#define	DMA5_START_ADDR			0xFFC00D44	/* DMA Channel 5 Start Address Register */
+#define	DMA5_CONFIG				0xFFC00D48	/* DMA Channel 5 Configuration Register */
+#define	DMA5_X_COUNT			0xFFC00D50	/* DMA Channel 5 X Count Register */
+#define	DMA5_X_MODIFY			0xFFC00D54	/* DMA Channel 5 X Modify Register */
+#define	DMA5_Y_COUNT			0xFFC00D58	/* DMA Channel 5 Y Count Register */
+#define	DMA5_Y_MODIFY			0xFFC00D5C	/* DMA Channel 5 Y Modify Register */
+#define	DMA5_CURR_DESC_PTR		0xFFC00D60	/* DMA Channel 5 Current Descriptor Pointer Register */
+#define	DMA5_CURR_ADDR			0xFFC00D64	/* DMA Channel 5 Current Address Register */
+#define	DMA5_IRQ_STATUS			0xFFC00D68	/* DMA Channel 5 Interrupt/Status Register */
+#define	DMA5_PERIPHERAL_MAP		0xFFC00D6C	/* DMA Channel 5 Peripheral Map	Register */
+#define	DMA5_CURR_X_COUNT		0xFFC00D70	/* DMA Channel 5 Current X Count Register */
+#define	DMA5_CURR_Y_COUNT		0xFFC00D78	/* DMA Channel 5 Current Y Count Register */
+
+#define	DMA6_NEXT_DESC_PTR		0xFFC00D80	/* DMA Channel 6 Next Descriptor Pointer Register */
+#define	DMA6_START_ADDR			0xFFC00D84	/* DMA Channel 6 Start Address Register */
+#define	DMA6_CONFIG				0xFFC00D88	/* DMA Channel 6 Configuration Register */
+#define	DMA6_X_COUNT			0xFFC00D90	/* DMA Channel 6 X Count Register */
+#define	DMA6_X_MODIFY			0xFFC00D94	/* DMA Channel 6 X Modify Register */
+#define	DMA6_Y_COUNT			0xFFC00D98	/* DMA Channel 6 Y Count Register */
+#define	DMA6_Y_MODIFY			0xFFC00D9C	/* DMA Channel 6 Y Modify Register */
+#define	DMA6_CURR_DESC_PTR		0xFFC00DA0	/* DMA Channel 6 Current Descriptor Pointer Register */
+#define	DMA6_CURR_ADDR			0xFFC00DA4	/* DMA Channel 6 Current Address Register */
+#define	DMA6_IRQ_STATUS			0xFFC00DA8	/* DMA Channel 6 Interrupt/Status Register */
+#define	DMA6_PERIPHERAL_MAP		0xFFC00DAC	/* DMA Channel 6 Peripheral Map	Register */
+#define	DMA6_CURR_X_COUNT		0xFFC00DB0	/* DMA Channel 6 Current X Count Register */
+#define	DMA6_CURR_Y_COUNT		0xFFC00DB8	/* DMA Channel 6 Current Y Count Register */
+
+#define	DMA7_NEXT_DESC_PTR		0xFFC00DC0	/* DMA Channel 7 Next Descriptor Pointer Register */
+#define	DMA7_START_ADDR			0xFFC00DC4	/* DMA Channel 7 Start Address Register */
+#define	DMA7_CONFIG				0xFFC00DC8	/* DMA Channel 7 Configuration Register */
+#define	DMA7_X_COUNT			0xFFC00DD0	/* DMA Channel 7 X Count Register */
+#define	DMA7_X_MODIFY			0xFFC00DD4	/* DMA Channel 7 X Modify Register */
+#define	DMA7_Y_COUNT			0xFFC00DD8	/* DMA Channel 7 Y Count Register */
+#define	DMA7_Y_MODIFY			0xFFC00DDC	/* DMA Channel 7 Y Modify Register */
+#define	DMA7_CURR_DESC_PTR		0xFFC00DE0	/* DMA Channel 7 Current Descriptor Pointer Register */
+#define	DMA7_CURR_ADDR			0xFFC00DE4	/* DMA Channel 7 Current Address Register */
+#define	DMA7_IRQ_STATUS			0xFFC00DE8	/* DMA Channel 7 Interrupt/Status Register */
+#define	DMA7_PERIPHERAL_MAP		0xFFC00DEC	/* DMA Channel 7 Peripheral Map	Register */
+#define	DMA7_CURR_X_COUNT		0xFFC00DF0	/* DMA Channel 7 Current X Count Register */
+#define	DMA7_CURR_Y_COUNT		0xFFC00DF8	/* DMA Channel 7 Current Y Count Register */
+
+#define	MDMA_D0_NEXT_DESC_PTR	0xFFC00E00	/* MemDMA0 Stream 0 Destination	Next Descriptor	Pointer	Register */
+#define	MDMA_D0_START_ADDR		0xFFC00E04	/* MemDMA0 Stream 0 Destination	Start Address Register */
+#define	MDMA_D0_CONFIG			0xFFC00E08	/* MemDMA0 Stream 0 Destination	Configuration Register */
+#define	MDMA_D0_X_COUNT		0xFFC00E10	/* MemDMA0 Stream 0 Destination	X Count	Register */
+#define	MDMA_D0_X_MODIFY		0xFFC00E14	/* MemDMA0 Stream 0 Destination	X Modify Register */
+#define	MDMA_D0_Y_COUNT		0xFFC00E18	/* MemDMA0 Stream 0 Destination	Y Count	Register */
+#define	MDMA_D0_Y_MODIFY		0xFFC00E1C	/* MemDMA0 Stream 0 Destination	Y Modify Register */
+#define	MDMA_D0_CURR_DESC_PTR	0xFFC00E20	/* MemDMA0 Stream 0 Destination	Current	Descriptor Pointer Register */
+#define	MDMA_D0_CURR_ADDR		0xFFC00E24	/* MemDMA0 Stream 0 Destination	Current	Address	Register */
+#define	MDMA_D0_IRQ_STATUS		0xFFC00E28	/* MemDMA0 Stream 0 Destination	Interrupt/Status Register */
+#define	MDMA_D0_PERIPHERAL_MAP	0xFFC00E2C	/* MemDMA0 Stream 0 Destination	Peripheral Map Register */
+#define	MDMA_D0_CURR_X_COUNT	0xFFC00E30	/* MemDMA0 Stream 0 Destination	Current	X Count	Register */
+#define	MDMA_D0_CURR_Y_COUNT	0xFFC00E38	/* MemDMA0 Stream 0 Destination	Current	Y Count	Register */
+
+#define	MDMA_S0_NEXT_DESC_PTR	0xFFC00E40	/* MemDMA0 Stream 0 Source Next	Descriptor Pointer Register */
+#define	MDMA_S0_START_ADDR		0xFFC00E44	/* MemDMA0 Stream 0 Source Start Address Register */
+#define	MDMA_S0_CONFIG			0xFFC00E48	/* MemDMA0 Stream 0 Source Configuration Register */
+#define	MDMA_S0_X_COUNT		0xFFC00E50	/* MemDMA0 Stream 0 Source X Count Register */
+#define	MDMA_S0_X_MODIFY		0xFFC00E54	/* MemDMA0 Stream 0 Source X Modify Register */
+#define	MDMA_S0_Y_COUNT		0xFFC00E58	/* MemDMA0 Stream 0 Source Y Count Register */
+#define	MDMA_S0_Y_MODIFY		0xFFC00E5C	/* MemDMA0 Stream 0 Source Y Modify Register */
+#define	MDMA_S0_CURR_DESC_PTR	0xFFC00E60	/* MemDMA0 Stream 0 Source Current Descriptor Pointer Register */
+#define	MDMA_S0_CURR_ADDR		0xFFC00E64	/* MemDMA0 Stream 0 Source Current Address Register */
+#define	MDMA_S0_IRQ_STATUS		0xFFC00E68	/* MemDMA0 Stream 0 Source Interrupt/Status Register */
+#define	MDMA_S0_PERIPHERAL_MAP	0xFFC00E6C	/* MemDMA0 Stream 0 Source Peripheral Map Register */
+#define	MDMA_S0_CURR_X_COUNT	0xFFC00E70	/* MemDMA0 Stream 0 Source Current X Count Register */
+#define	MDMA_S0_CURR_Y_COUNT	0xFFC00E78	/* MemDMA0 Stream 0 Source Current Y Count Register */
+
+#define	MDMA_D1_NEXT_DESC_PTR	0xFFC00E80	/* MemDMA0 Stream 1 Destination	Next Descriptor	Pointer	Register */
+#define	MDMA_D1_START_ADDR		0xFFC00E84	/* MemDMA0 Stream 1 Destination	Start Address Register */
+#define	MDMA_D1_CONFIG			0xFFC00E88	/* MemDMA0 Stream 1 Destination	Configuration Register */
+#define	MDMA_D1_X_COUNT		0xFFC00E90	/* MemDMA0 Stream 1 Destination	X Count	Register */
+#define	MDMA_D1_X_MODIFY		0xFFC00E94	/* MemDMA0 Stream 1 Destination	X Modify Register */
+#define	MDMA_D1_Y_COUNT		0xFFC00E98	/* MemDMA0 Stream 1 Destination	Y Count	Register */
+#define	MDMA_D1_Y_MODIFY		0xFFC00E9C	/* MemDMA0 Stream 1 Destination	Y Modify Register */
+#define	MDMA_D1_CURR_DESC_PTR	0xFFC00EA0	/* MemDMA0 Stream 1 Destination	Current	Descriptor Pointer Register */
+#define	MDMA_D1_CURR_ADDR		0xFFC00EA4	/* MemDMA0 Stream 1 Destination	Current	Address	Register */
+#define	MDMA_D1_IRQ_STATUS		0xFFC00EA8	/* MemDMA0 Stream 1 Destination	Interrupt/Status Register */
+#define	MDMA_D1_PERIPHERAL_MAP	0xFFC00EAC	/* MemDMA0 Stream 1 Destination	Peripheral Map Register */
+#define	MDMA_D1_CURR_X_COUNT	0xFFC00EB0	/* MemDMA0 Stream 1 Destination	Current	X Count	Register */
+#define	MDMA_D1_CURR_Y_COUNT	0xFFC00EB8	/* MemDMA0 Stream 1 Destination	Current	Y Count	Register */
+
+#define	MDMA_S1_NEXT_DESC_PTR	0xFFC00EC0	/* MemDMA0 Stream 1 Source Next	Descriptor Pointer Register */
+#define	MDMA_S1_START_ADDR		0xFFC00EC4	/* MemDMA0 Stream 1 Source Start Address Register */
+#define	MDMA_S1_CONFIG			0xFFC00EC8	/* MemDMA0 Stream 1 Source Configuration Register */
+#define	MDMA_S1_X_COUNT		0xFFC00ED0	/* MemDMA0 Stream 1 Source X Count Register */
+#define	MDMA_S1_X_MODIFY		0xFFC00ED4	/* MemDMA0 Stream 1 Source X Modify Register */
+#define	MDMA_S1_Y_COUNT		0xFFC00ED8	/* MemDMA0 Stream 1 Source Y Count Register */
+#define	MDMA_S1_Y_MODIFY		0xFFC00EDC	/* MemDMA0 Stream 1 Source Y Modify Register */
+#define	MDMA_S1_CURR_DESC_PTR	0xFFC00EE0	/* MemDMA0 Stream 1 Source Current Descriptor Pointer Register */
+#define	MDMA_S1_CURR_ADDR		0xFFC00EE4	/* MemDMA0 Stream 1 Source Current Address Register */
+#define	MDMA_S1_IRQ_STATUS		0xFFC00EE8	/* MemDMA0 Stream 1 Source Interrupt/Status Register */
+#define	MDMA_S1_PERIPHERAL_MAP	0xFFC00EEC	/* MemDMA0 Stream 1 Source Peripheral Map Register */
+#define	MDMA_S1_CURR_X_COUNT	0xFFC00EF0	/* MemDMA0 Stream 1 Source Current X Count Register */
+#define	MDMA_S1_CURR_Y_COUNT	0xFFC00EF8	/* MemDMA0 Stream 1 Source Current Y Count Register */
+
+
+/* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */
+#define	PPI_CONTROL			0xFFC01000	/* PPI Control Register */
+#define	PPI_STATUS			0xFFC01004	/* PPI Status Register */
+#define	PPI_COUNT			0xFFC01008	/* PPI Transfer	Count Register */
+#define	PPI_DELAY			0xFFC0100C	/* PPI Delay Count Register */
+#define	PPI_FRAME			0xFFC01010	/* PPI Frame Length Register */
+
+
+/* Two-Wire Interface 0	(0xFFC01400 - 0xFFC014FF)			 */
+#define	TWI0_CLKDIV			0xFFC01400	/* Serial Clock	Divider	Register */
+#define	TWI0_CONTROL		0xFFC01404	/* TWI0	Master Internal	Time Reference Register */
+#define	TWI0_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register */
+#define	TWI0_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register */
+#define	TWI0_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register */
+#define	TWI0_MASTER_CTL	0xFFC01414	/* Master Mode Control Register */
+#define	TWI0_MASTER_STAT	0xFFC01418	/* Master Mode Status Register */
+#define	TWI0_MASTER_ADDR	0xFFC0141C	/* Master Mode Address Register */
+#define	TWI0_INT_STAT		0xFFC01420	/* TWI0	Master Interrupt Register */
+#define	TWI0_INT_MASK		0xFFC01424	/* TWI0	Master Interrupt Mask Register */
+#define	TWI0_FIFO_CTL		0xFFC01428	/* FIFO	Control	Register */
+#define	TWI0_FIFO_STAT		0xFFC0142C	/* FIFO	Status Register */
+#define	TWI0_XMT_DATA8		0xFFC01480	/* FIFO	Transmit Data Single Byte Register */
+#define	TWI0_XMT_DATA16		0xFFC01484	/* FIFO	Transmit Data Double Byte Register */
+#define	TWI0_RCV_DATA8		0xFFC01488	/* FIFO	Receive	Data Single Byte Register */
+#define	TWI0_RCV_DATA16		0xFFC0148C	/* FIFO	Receive	Data Double Byte Register */
+
+#define TWI0_REGBASE		TWI0_CLKDIV
+
+/* the following are for backwards compatibility */
+#define	TWI0_PRESCALE	 TWI0_CONTROL
+#define	TWI0_INT_SRC	 TWI0_INT_STAT
+#define	TWI0_INT_ENABLE	 TWI0_INT_MASK
+
+
+/* General-Purpose Ports  (0xFFC01500 -	0xFFC015FF)	 */
+
+/* GPIO	Port C Register	Names */
+#define PORTCIO_FER			0xFFC01500	/* GPIO	Pin Port C Configuration Register */
+#define PORTCIO				0xFFC01510	/* GPIO	Pin Port C Data	Register */
+#define PORTCIO_CLEAR			0xFFC01520	/* Clear GPIO Pin Port C Register */
+#define PORTCIO_SET			0xFFC01530	/* Set GPIO Pin	Port C Register */
+#define PORTCIO_TOGGLE			0xFFC01540	/* Toggle GPIO Pin Port	C Register */
+#define PORTCIO_DIR			0xFFC01550	/* GPIO	Pin Port C Direction Register */
+#define PORTCIO_INEN			0xFFC01560	/* GPIO	Pin Port C Input Enable	Register */
+
+/* GPIO	Port D Register	Names */
+#define PORTDIO_FER			0xFFC01504	/* GPIO	Pin Port D Configuration Register */
+#define PORTDIO				0xFFC01514	/* GPIO	Pin Port D Data	Register */
+#define PORTDIO_CLEAR			0xFFC01524	/* Clear GPIO Pin Port D Register */
+#define PORTDIO_SET			0xFFC01534	/* Set GPIO Pin	Port D Register */
+#define PORTDIO_TOGGLE			0xFFC01544	/* Toggle GPIO Pin Port	D Register */
+#define PORTDIO_DIR			0xFFC01554	/* GPIO	Pin Port D Direction Register */
+#define PORTDIO_INEN			0xFFC01564	/* GPIO	Pin Port D Input Enable	Register */
+
+/* GPIO	Port E Register	Names */
+#define PORTEIO_FER			0xFFC01508	/* GPIO	Pin Port E Configuration Register */
+#define PORTEIO				0xFFC01518	/* GPIO	Pin Port E Data	Register */
+#define PORTEIO_CLEAR			0xFFC01528	/* Clear GPIO Pin Port E Register */
+#define PORTEIO_SET			0xFFC01538	/* Set GPIO Pin	Port E Register */
+#define PORTEIO_TOGGLE			0xFFC01548	/* Toggle GPIO Pin Port	E Register */
+#define PORTEIO_DIR			0xFFC01558	/* GPIO	Pin Port E Direction Register */
+#define PORTEIO_INEN			0xFFC01568	/* GPIO	Pin Port E Input Enable	Register */
+
+/* DMA Controller 1 Traffic Control Registers (0xFFC01B00 - 0xFFC01BFF) */
+
+#define	DMAC1_TC_PER			0xFFC01B0C	/* DMA Controller 1 Traffic Control Periods Register */
+#define	DMAC1_TC_CNT			0xFFC01B10	/* DMA Controller 1 Traffic Control Current Counts Register */
+
+
+
+/* DMA Controller 1 (0xFFC01C00	- 0xFFC01FFF)							 */
+#define	DMA8_NEXT_DESC_PTR		0xFFC01C00	/* DMA Channel 8 Next Descriptor Pointer Register */
+#define	DMA8_START_ADDR			0xFFC01C04	/* DMA Channel 8 Start Address Register */
+#define	DMA8_CONFIG				0xFFC01C08	/* DMA Channel 8 Configuration Register */
+#define	DMA8_X_COUNT			0xFFC01C10	/* DMA Channel 8 X Count Register */
+#define	DMA8_X_MODIFY			0xFFC01C14	/* DMA Channel 8 X Modify Register */
+#define	DMA8_Y_COUNT			0xFFC01C18	/* DMA Channel 8 Y Count Register */
+#define	DMA8_Y_MODIFY			0xFFC01C1C	/* DMA Channel 8 Y Modify Register */
+#define	DMA8_CURR_DESC_PTR		0xFFC01C20	/* DMA Channel 8 Current Descriptor Pointer Register */
+#define	DMA8_CURR_ADDR			0xFFC01C24	/* DMA Channel 8 Current Address Register */
+#define	DMA8_IRQ_STATUS			0xFFC01C28	/* DMA Channel 8 Interrupt/Status Register */
+#define	DMA8_PERIPHERAL_MAP		0xFFC01C2C	/* DMA Channel 8 Peripheral Map	Register */
+#define	DMA8_CURR_X_COUNT		0xFFC01C30	/* DMA Channel 8 Current X Count Register */
+#define	DMA8_CURR_Y_COUNT		0xFFC01C38	/* DMA Channel 8 Current Y Count Register */
+
+#define	DMA9_NEXT_DESC_PTR		0xFFC01C40	/* DMA Channel 9 Next Descriptor Pointer Register */
+#define	DMA9_START_ADDR			0xFFC01C44	/* DMA Channel 9 Start Address Register */
+#define	DMA9_CONFIG				0xFFC01C48	/* DMA Channel 9 Configuration Register */
+#define	DMA9_X_COUNT			0xFFC01C50	/* DMA Channel 9 X Count Register */
+#define	DMA9_X_MODIFY			0xFFC01C54	/* DMA Channel 9 X Modify Register */
+#define	DMA9_Y_COUNT			0xFFC01C58	/* DMA Channel 9 Y Count Register */
+#define	DMA9_Y_MODIFY			0xFFC01C5C	/* DMA Channel 9 Y Modify Register */
+#define	DMA9_CURR_DESC_PTR		0xFFC01C60	/* DMA Channel 9 Current Descriptor Pointer Register */
+#define	DMA9_CURR_ADDR			0xFFC01C64	/* DMA Channel 9 Current Address Register */
+#define	DMA9_IRQ_STATUS			0xFFC01C68	/* DMA Channel 9 Interrupt/Status Register */
+#define	DMA9_PERIPHERAL_MAP		0xFFC01C6C	/* DMA Channel 9 Peripheral Map	Register */
+#define	DMA9_CURR_X_COUNT		0xFFC01C70	/* DMA Channel 9 Current X Count Register */
+#define	DMA9_CURR_Y_COUNT		0xFFC01C78	/* DMA Channel 9 Current Y Count Register */
+
+#define	DMA10_NEXT_DESC_PTR		0xFFC01C80	/* DMA Channel 10 Next Descriptor Pointer Register */
+#define	DMA10_START_ADDR		0xFFC01C84	/* DMA Channel 10 Start	Address	Register */
+#define	DMA10_CONFIG			0xFFC01C88	/* DMA Channel 10 Configuration	Register */
+#define	DMA10_X_COUNT			0xFFC01C90	/* DMA Channel 10 X Count Register */
+#define	DMA10_X_MODIFY			0xFFC01C94	/* DMA Channel 10 X Modify Register */
+#define	DMA10_Y_COUNT			0xFFC01C98	/* DMA Channel 10 Y Count Register */
+#define	DMA10_Y_MODIFY			0xFFC01C9C	/* DMA Channel 10 Y Modify Register */
+#define	DMA10_CURR_DESC_PTR		0xFFC01CA0	/* DMA Channel 10 Current Descriptor Pointer Register */
+#define	DMA10_CURR_ADDR			0xFFC01CA4	/* DMA Channel 10 Current Address Register */
+#define	DMA10_IRQ_STATUS		0xFFC01CA8	/* DMA Channel 10 Interrupt/Status Register */
+#define	DMA10_PERIPHERAL_MAP	0xFFC01CAC	/* DMA Channel 10 Peripheral Map Register */
+#define	DMA10_CURR_X_COUNT		0xFFC01CB0	/* DMA Channel 10 Current X Count Register */
+#define	DMA10_CURR_Y_COUNT		0xFFC01CB8	/* DMA Channel 10 Current Y Count Register */
+
+#define	DMA11_NEXT_DESC_PTR		0xFFC01CC0	/* DMA Channel 11 Next Descriptor Pointer Register */
+#define	DMA11_START_ADDR		0xFFC01CC4	/* DMA Channel 11 Start	Address	Register */
+#define	DMA11_CONFIG			0xFFC01CC8	/* DMA Channel 11 Configuration	Register */
+#define	DMA11_X_COUNT			0xFFC01CD0	/* DMA Channel 11 X Count Register */
+#define	DMA11_X_MODIFY			0xFFC01CD4	/* DMA Channel 11 X Modify Register */
+#define	DMA11_Y_COUNT			0xFFC01CD8	/* DMA Channel 11 Y Count Register */
+#define	DMA11_Y_MODIFY			0xFFC01CDC	/* DMA Channel 11 Y Modify Register */
+#define	DMA11_CURR_DESC_PTR		0xFFC01CE0	/* DMA Channel 11 Current Descriptor Pointer Register */
+#define	DMA11_CURR_ADDR			0xFFC01CE4	/* DMA Channel 11 Current Address Register */
+#define	DMA11_IRQ_STATUS		0xFFC01CE8	/* DMA Channel 11 Interrupt/Status Register */
+#define	DMA11_PERIPHERAL_MAP	0xFFC01CEC	/* DMA Channel 11 Peripheral Map Register */
+#define	DMA11_CURR_X_COUNT		0xFFC01CF0	/* DMA Channel 11 Current X Count Register */
+#define	DMA11_CURR_Y_COUNT		0xFFC01CF8	/* DMA Channel 11 Current Y Count Register */
+
+#define	DMA12_NEXT_DESC_PTR		0xFFC01D00	/* DMA Channel 12 Next Descriptor Pointer Register */
+#define	DMA12_START_ADDR		0xFFC01D04	/* DMA Channel 12 Start	Address	Register */
+#define	DMA12_CONFIG			0xFFC01D08	/* DMA Channel 12 Configuration	Register */
+#define	DMA12_X_COUNT			0xFFC01D10	/* DMA Channel 12 X Count Register */
+#define	DMA12_X_MODIFY			0xFFC01D14	/* DMA Channel 12 X Modify Register */
+#define	DMA12_Y_COUNT			0xFFC01D18	/* DMA Channel 12 Y Count Register */
+#define	DMA12_Y_MODIFY			0xFFC01D1C	/* DMA Channel 12 Y Modify Register */
+#define	DMA12_CURR_DESC_PTR		0xFFC01D20	/* DMA Channel 12 Current Descriptor Pointer Register */
+#define	DMA12_CURR_ADDR			0xFFC01D24	/* DMA Channel 12 Current Address Register */
+#define	DMA12_IRQ_STATUS		0xFFC01D28	/* DMA Channel 12 Interrupt/Status Register */
+#define	DMA12_PERIPHERAL_MAP	0xFFC01D2C	/* DMA Channel 12 Peripheral Map Register */
+#define	DMA12_CURR_X_COUNT		0xFFC01D30	/* DMA Channel 12 Current X Count Register */
+#define	DMA12_CURR_Y_COUNT		0xFFC01D38	/* DMA Channel 12 Current Y Count Register */
+
+#define	DMA13_NEXT_DESC_PTR		0xFFC01D40	/* DMA Channel 13 Next Descriptor Pointer Register */
+#define	DMA13_START_ADDR		0xFFC01D44	/* DMA Channel 13 Start	Address	Register */
+#define	DMA13_CONFIG			0xFFC01D48	/* DMA Channel 13 Configuration	Register */
+#define	DMA13_X_COUNT			0xFFC01D50	/* DMA Channel 13 X Count Register */
+#define	DMA13_X_MODIFY			0xFFC01D54	/* DMA Channel 13 X Modify Register */
+#define	DMA13_Y_COUNT			0xFFC01D58	/* DMA Channel 13 Y Count Register */
+#define	DMA13_Y_MODIFY			0xFFC01D5C	/* DMA Channel 13 Y Modify Register */
+#define	DMA13_CURR_DESC_PTR		0xFFC01D60	/* DMA Channel 13 Current Descriptor Pointer Register */
+#define	DMA13_CURR_ADDR			0xFFC01D64	/* DMA Channel 13 Current Address Register */
+#define	DMA13_IRQ_STATUS		0xFFC01D68	/* DMA Channel 13 Interrupt/Status Register */
+#define	DMA13_PERIPHERAL_MAP	0xFFC01D6C	/* DMA Channel 13 Peripheral Map Register */
+#define	DMA13_CURR_X_COUNT		0xFFC01D70	/* DMA Channel 13 Current X Count Register */
+#define	DMA13_CURR_Y_COUNT		0xFFC01D78	/* DMA Channel 13 Current Y Count Register */
+
+#define	DMA14_NEXT_DESC_PTR		0xFFC01D80	/* DMA Channel 14 Next Descriptor Pointer Register */
+#define	DMA14_START_ADDR		0xFFC01D84	/* DMA Channel 14 Start	Address	Register */
+#define	DMA14_CONFIG			0xFFC01D88	/* DMA Channel 14 Configuration	Register */
+#define	DMA14_X_COUNT			0xFFC01D90	/* DMA Channel 14 X Count Register */
+#define	DMA14_X_MODIFY			0xFFC01D94	/* DMA Channel 14 X Modify Register */
+#define	DMA14_Y_COUNT			0xFFC01D98	/* DMA Channel 14 Y Count Register */
+#define	DMA14_Y_MODIFY			0xFFC01D9C	/* DMA Channel 14 Y Modify Register */
+#define	DMA14_CURR_DESC_PTR		0xFFC01DA0	/* DMA Channel 14 Current Descriptor Pointer Register */
+#define	DMA14_CURR_ADDR			0xFFC01DA4	/* DMA Channel 14 Current Address Register */
+#define	DMA14_IRQ_STATUS		0xFFC01DA8	/* DMA Channel 14 Interrupt/Status Register */
+#define	DMA14_PERIPHERAL_MAP	0xFFC01DAC	/* DMA Channel 14 Peripheral Map Register */
+#define	DMA14_CURR_X_COUNT		0xFFC01DB0	/* DMA Channel 14 Current X Count Register */
+#define	DMA14_CURR_Y_COUNT		0xFFC01DB8	/* DMA Channel 14 Current Y Count Register */
+
+#define	DMA15_NEXT_DESC_PTR		0xFFC01DC0	/* DMA Channel 15 Next Descriptor Pointer Register */
+#define	DMA15_START_ADDR		0xFFC01DC4	/* DMA Channel 15 Start	Address	Register */
+#define	DMA15_CONFIG			0xFFC01DC8	/* DMA Channel 15 Configuration	Register */
+#define	DMA15_X_COUNT			0xFFC01DD0	/* DMA Channel 15 X Count Register */
+#define	DMA15_X_MODIFY			0xFFC01DD4	/* DMA Channel 15 X Modify Register */
+#define	DMA15_Y_COUNT			0xFFC01DD8	/* DMA Channel 15 Y Count Register */
+#define	DMA15_Y_MODIFY			0xFFC01DDC	/* DMA Channel 15 Y Modify Register */
+#define	DMA15_CURR_DESC_PTR		0xFFC01DE0	/* DMA Channel 15 Current Descriptor Pointer Register */
+#define	DMA15_CURR_ADDR			0xFFC01DE4	/* DMA Channel 15 Current Address Register */
+#define	DMA15_IRQ_STATUS		0xFFC01DE8	/* DMA Channel 15 Interrupt/Status Register */
+#define	DMA15_PERIPHERAL_MAP	0xFFC01DEC	/* DMA Channel 15 Peripheral Map Register */
+#define	DMA15_CURR_X_COUNT		0xFFC01DF0	/* DMA Channel 15 Current X Count Register */
+#define	DMA15_CURR_Y_COUNT		0xFFC01DF8	/* DMA Channel 15 Current Y Count Register */
+
+#define	DMA16_NEXT_DESC_PTR		0xFFC01E00	/* DMA Channel 16 Next Descriptor Pointer Register */
+#define	DMA16_START_ADDR		0xFFC01E04	/* DMA Channel 16 Start	Address	Register */
+#define	DMA16_CONFIG			0xFFC01E08	/* DMA Channel 16 Configuration	Register */
+#define	DMA16_X_COUNT			0xFFC01E10	/* DMA Channel 16 X Count Register */
+#define	DMA16_X_MODIFY			0xFFC01E14	/* DMA Channel 16 X Modify Register */
+#define	DMA16_Y_COUNT			0xFFC01E18	/* DMA Channel 16 Y Count Register */
+#define	DMA16_Y_MODIFY			0xFFC01E1C	/* DMA Channel 16 Y Modify Register */
+#define	DMA16_CURR_DESC_PTR		0xFFC01E20	/* DMA Channel 16 Current Descriptor Pointer Register */
+#define	DMA16_CURR_ADDR			0xFFC01E24	/* DMA Channel 16 Current Address Register */
+#define	DMA16_IRQ_STATUS		0xFFC01E28	/* DMA Channel 16 Interrupt/Status Register */
+#define	DMA16_PERIPHERAL_MAP	0xFFC01E2C	/* DMA Channel 16 Peripheral Map Register */
+#define	DMA16_CURR_X_COUNT		0xFFC01E30	/* DMA Channel 16 Current X Count Register */
+#define	DMA16_CURR_Y_COUNT		0xFFC01E38	/* DMA Channel 16 Current Y Count Register */
+
+#define	DMA17_NEXT_DESC_PTR		0xFFC01E40	/* DMA Channel 17 Next Descriptor Pointer Register */
+#define	DMA17_START_ADDR		0xFFC01E44	/* DMA Channel 17 Start	Address	Register */
+#define	DMA17_CONFIG			0xFFC01E48	/* DMA Channel 17 Configuration	Register */
+#define	DMA17_X_COUNT			0xFFC01E50	/* DMA Channel 17 X Count Register */
+#define	DMA17_X_MODIFY			0xFFC01E54	/* DMA Channel 17 X Modify Register */
+#define	DMA17_Y_COUNT			0xFFC01E58	/* DMA Channel 17 Y Count Register */
+#define	DMA17_Y_MODIFY			0xFFC01E5C	/* DMA Channel 17 Y Modify Register */
+#define	DMA17_CURR_DESC_PTR		0xFFC01E60	/* DMA Channel 17 Current Descriptor Pointer Register */
+#define	DMA17_CURR_ADDR			0xFFC01E64	/* DMA Channel 17 Current Address Register */
+#define	DMA17_IRQ_STATUS		0xFFC01E68	/* DMA Channel 17 Interrupt/Status Register */
+#define	DMA17_PERIPHERAL_MAP	0xFFC01E6C	/* DMA Channel 17 Peripheral Map Register */
+#define	DMA17_CURR_X_COUNT		0xFFC01E70	/* DMA Channel 17 Current X Count Register */
+#define	DMA17_CURR_Y_COUNT		0xFFC01E78	/* DMA Channel 17 Current Y Count Register */
+
+#define	DMA18_NEXT_DESC_PTR		0xFFC01E80	/* DMA Channel 18 Next Descriptor Pointer Register */
+#define	DMA18_START_ADDR		0xFFC01E84	/* DMA Channel 18 Start	Address	Register */
+#define	DMA18_CONFIG			0xFFC01E88	/* DMA Channel 18 Configuration	Register */
+#define	DMA18_X_COUNT			0xFFC01E90	/* DMA Channel 18 X Count Register */
+#define	DMA18_X_MODIFY			0xFFC01E94	/* DMA Channel 18 X Modify Register */
+#define	DMA18_Y_COUNT			0xFFC01E98	/* DMA Channel 18 Y Count Register */
+#define	DMA18_Y_MODIFY			0xFFC01E9C	/* DMA Channel 18 Y Modify Register */
+#define	DMA18_CURR_DESC_PTR		0xFFC01EA0	/* DMA Channel 18 Current Descriptor Pointer Register */
+#define	DMA18_CURR_ADDR			0xFFC01EA4	/* DMA Channel 18 Current Address Register */
+#define	DMA18_IRQ_STATUS		0xFFC01EA8	/* DMA Channel 18 Interrupt/Status Register */
+#define	DMA18_PERIPHERAL_MAP	0xFFC01EAC	/* DMA Channel 18 Peripheral Map Register */
+#define	DMA18_CURR_X_COUNT		0xFFC01EB0	/* DMA Channel 18 Current X Count Register */
+#define	DMA18_CURR_Y_COUNT		0xFFC01EB8	/* DMA Channel 18 Current Y Count Register */
+
+#define	DMA19_NEXT_DESC_PTR		0xFFC01EC0	/* DMA Channel 19 Next Descriptor Pointer Register */
+#define	DMA19_START_ADDR		0xFFC01EC4	/* DMA Channel 19 Start	Address	Register */
+#define	DMA19_CONFIG			0xFFC01EC8	/* DMA Channel 19 Configuration	Register */
+#define	DMA19_X_COUNT			0xFFC01ED0	/* DMA Channel 19 X Count Register */
+#define	DMA19_X_MODIFY			0xFFC01ED4	/* DMA Channel 19 X Modify Register */
+#define	DMA19_Y_COUNT			0xFFC01ED8	/* DMA Channel 19 Y Count Register */
+#define	DMA19_Y_MODIFY			0xFFC01EDC	/* DMA Channel 19 Y Modify Register */
+#define	DMA19_CURR_DESC_PTR		0xFFC01EE0	/* DMA Channel 19 Current Descriptor Pointer Register */
+#define	DMA19_CURR_ADDR			0xFFC01EE4	/* DMA Channel 19 Current Address Register */
+#define	DMA19_IRQ_STATUS		0xFFC01EE8	/* DMA Channel 19 Interrupt/Status Register */
+#define	DMA19_PERIPHERAL_MAP	0xFFC01EEC	/* DMA Channel 19 Peripheral Map Register */
+#define	DMA19_CURR_X_COUNT		0xFFC01EF0	/* DMA Channel 19 Current X Count Register */
+#define	DMA19_CURR_Y_COUNT		0xFFC01EF8	/* DMA Channel 19 Current Y Count Register */
+
+#define	MDMA_D2_NEXT_DESC_PTR	0xFFC01F00	/* MemDMA1 Stream 0 Destination	Next Descriptor	Pointer	Register */
+#define	MDMA_D2_START_ADDR		0xFFC01F04	/* MemDMA1 Stream 0 Destination	Start Address Register */
+#define	MDMA_D2_CONFIG			0xFFC01F08	/* MemDMA1 Stream 0 Destination	Configuration Register */
+#define	MDMA_D2_X_COUNT		0xFFC01F10	/* MemDMA1 Stream 0 Destination	X Count	Register */
+#define	MDMA_D2_X_MODIFY		0xFFC01F14	/* MemDMA1 Stream 0 Destination	X Modify Register */
+#define	MDMA_D2_Y_COUNT		0xFFC01F18	/* MemDMA1 Stream 0 Destination	Y Count	Register */
+#define	MDMA_D2_Y_MODIFY		0xFFC01F1C	/* MemDMA1 Stream 0 Destination	Y Modify Register */
+#define	MDMA_D2_CURR_DESC_PTR	0xFFC01F20	/* MemDMA1 Stream 0 Destination	Current	Descriptor Pointer Register */
+#define	MDMA_D2_CURR_ADDR		0xFFC01F24	/* MemDMA1 Stream 0 Destination	Current	Address	Register */
+#define	MDMA_D2_IRQ_STATUS		0xFFC01F28	/* MemDMA1 Stream 0 Destination	Interrupt/Status Register */
+#define	MDMA_D2_PERIPHERAL_MAP	0xFFC01F2C	/* MemDMA1 Stream 0 Destination	Peripheral Map Register */
+#define	MDMA_D2_CURR_X_COUNT	0xFFC01F30	/* MemDMA1 Stream 0 Destination	Current	X Count	Register */
+#define	MDMA_D2_CURR_Y_COUNT	0xFFC01F38	/* MemDMA1 Stream 0 Destination	Current	Y Count	Register */
+
+#define	MDMA_S2_NEXT_DESC_PTR	0xFFC01F40	/* MemDMA1 Stream 0 Source Next	Descriptor Pointer Register */
+#define	MDMA_S2_START_ADDR		0xFFC01F44	/* MemDMA1 Stream 0 Source Start Address Register */
+#define	MDMA_S2_CONFIG			0xFFC01F48	/* MemDMA1 Stream 0 Source Configuration Register */
+#define	MDMA_S2_X_COUNT		0xFFC01F50	/* MemDMA1 Stream 0 Source X Count Register */
+#define	MDMA_S2_X_MODIFY		0xFFC01F54	/* MemDMA1 Stream 0 Source X Modify Register */
+#define	MDMA_S2_Y_COUNT		0xFFC01F58	/* MemDMA1 Stream 0 Source Y Count Register */
+#define	MDMA_S2_Y_MODIFY		0xFFC01F5C	/* MemDMA1 Stream 0 Source Y Modify Register */
+#define	MDMA_S2_CURR_DESC_PTR	0xFFC01F60	/* MemDMA1 Stream 0 Source Current Descriptor Pointer Register */
+#define	MDMA_S2_CURR_ADDR		0xFFC01F64	/* MemDMA1 Stream 0 Source Current Address Register */
+#define	MDMA_S2_IRQ_STATUS		0xFFC01F68	/* MemDMA1 Stream 0 Source Interrupt/Status Register */
+#define	MDMA_S2_PERIPHERAL_MAP	0xFFC01F6C	/* MemDMA1 Stream 0 Source Peripheral Map Register */
+#define	MDMA_S2_CURR_X_COUNT	0xFFC01F70	/* MemDMA1 Stream 0 Source Current X Count Register */
+#define	MDMA_S2_CURR_Y_COUNT	0xFFC01F78	/* MemDMA1 Stream 0 Source Current Y Count Register */
+
+#define	MDMA_D3_NEXT_DESC_PTR	0xFFC01F80	/* MemDMA1 Stream 1 Destination	Next Descriptor	Pointer	Register */
+#define	MDMA_D3_START_ADDR		0xFFC01F84	/* MemDMA1 Stream 1 Destination	Start Address Register */
+#define	MDMA_D3_CONFIG			0xFFC01F88	/* MemDMA1 Stream 1 Destination	Configuration Register */
+#define	MDMA_D3_X_COUNT		0xFFC01F90	/* MemDMA1 Stream 1 Destination	X Count	Register */
+#define	MDMA_D3_X_MODIFY		0xFFC01F94	/* MemDMA1 Stream 1 Destination	X Modify Register */
+#define	MDMA_D3_Y_COUNT		0xFFC01F98	/* MemDMA1 Stream 1 Destination	Y Count	Register */
+#define	MDMA_D3_Y_MODIFY		0xFFC01F9C	/* MemDMA1 Stream 1 Destination	Y Modify Register */
+#define	MDMA_D3_CURR_DESC_PTR	0xFFC01FA0	/* MemDMA1 Stream 1 Destination	Current	Descriptor Pointer Register */
+#define	MDMA_D3_CURR_ADDR		0xFFC01FA4	/* MemDMA1 Stream 1 Destination	Current	Address	Register */
+#define	MDMA_D3_IRQ_STATUS		0xFFC01FA8	/* MemDMA1 Stream 1 Destination	Interrupt/Status Register */
+#define	MDMA_D3_PERIPHERAL_MAP	0xFFC01FAC	/* MemDMA1 Stream 1 Destination	Peripheral Map Register */
+#define	MDMA_D3_CURR_X_COUNT	0xFFC01FB0	/* MemDMA1 Stream 1 Destination	Current	X Count	Register */
+#define	MDMA_D3_CURR_Y_COUNT	0xFFC01FB8	/* MemDMA1 Stream 1 Destination	Current	Y Count	Register */
+
+#define	MDMA_S3_NEXT_DESC_PTR	0xFFC01FC0	/* MemDMA1 Stream 1 Source Next	Descriptor Pointer Register */
+#define	MDMA_S3_START_ADDR		0xFFC01FC4	/* MemDMA1 Stream 1 Source Start Address Register */
+#define	MDMA_S3_CONFIG			0xFFC01FC8	/* MemDMA1 Stream 1 Source Configuration Register */
+#define	MDMA_S3_X_COUNT		0xFFC01FD0	/* MemDMA1 Stream 1 Source X Count Register */
+#define	MDMA_S3_X_MODIFY		0xFFC01FD4	/* MemDMA1 Stream 1 Source X Modify Register */
+#define	MDMA_S3_Y_COUNT		0xFFC01FD8	/* MemDMA1 Stream 1 Source Y Count Register */
+#define	MDMA_S3_Y_MODIFY		0xFFC01FDC	/* MemDMA1 Stream 1 Source Y Modify Register */
+#define	MDMA_S3_CURR_DESC_PTR	0xFFC01FE0	/* MemDMA1 Stream 1 Source Current Descriptor Pointer Register */
+#define	MDMA_S3_CURR_ADDR		0xFFC01FE4	/* MemDMA1 Stream 1 Source Current Address Register */
+#define	MDMA_S3_IRQ_STATUS		0xFFC01FE8	/* MemDMA1 Stream 1 Source Interrupt/Status Register */
+#define	MDMA_S3_PERIPHERAL_MAP	0xFFC01FEC	/* MemDMA1 Stream 1 Source Peripheral Map Register */
+#define	MDMA_S3_CURR_X_COUNT	0xFFC01FF0	/* MemDMA1 Stream 1 Source Current X Count Register */
+#define	MDMA_S3_CURR_Y_COUNT	0xFFC01FF8	/* MemDMA1 Stream 1 Source Current Y Count Register */
+
+
+/* UART1 Controller		(0xFFC02000 - 0xFFC020FF)	 */
+#define	UART1_THR			0xFFC02000	/* Transmit Holding register */
+#define	UART1_RBR			0xFFC02000	/* Receive Buffer register */
+#define	UART1_DLL			0xFFC02000	/* Divisor Latch (Low-Byte) */
+#define	UART1_IER			0xFFC02004	/* Interrupt Enable Register */
+#define	UART1_DLH			0xFFC02004	/* Divisor Latch (High-Byte) */
+#define	UART1_IIR			0xFFC02008	/* Interrupt Identification Register */
+#define	UART1_LCR			0xFFC0200C	/* Line	Control	Register */
+#define	UART1_MCR			0xFFC02010	/* Modem Control Register */
+#define	UART1_LSR			0xFFC02014	/* Line	Status Register */
+#define	UART1_SCR			0xFFC0201C	/* SCR Scratch Register */
+#define	UART1_GCTL			0xFFC02024	/* Global Control Register */
+
+
+/* UART2 Controller		(0xFFC02100 - 0xFFC021FF)	 */
+#define	UART2_THR			0xFFC02100	/* Transmit Holding register */
+#define	UART2_RBR			0xFFC02100	/* Receive Buffer register */
+#define	UART2_DLL			0xFFC02100	/* Divisor Latch (Low-Byte) */
+#define	UART2_IER			0xFFC02104	/* Interrupt Enable Register */
+#define	UART2_DLH			0xFFC02104	/* Divisor Latch (High-Byte) */
+#define	UART2_IIR			0xFFC02108	/* Interrupt Identification Register */
+#define	UART2_LCR			0xFFC0210C	/* Line	Control	Register */
+#define	UART2_MCR			0xFFC02110	/* Modem Control Register */
+#define	UART2_LSR			0xFFC02114	/* Line	Status Register */
+#define	UART2_SCR			0xFFC0211C	/* SCR Scratch Register */
+#define	UART2_GCTL			0xFFC02124	/* Global Control Register */
+
+
+/* Two-Wire Interface 1	(0xFFC02200 - 0xFFC022FF)			 */
+#define	TWI1_CLKDIV			0xFFC02200	/* Serial Clock	Divider	Register */
+#define	TWI1_CONTROL		0xFFC02204	/* TWI1	Master Internal	Time Reference Register */
+#define	TWI1_SLAVE_CTL		0xFFC02208	/* Slave Mode Control Register */
+#define	TWI1_SLAVE_STAT		0xFFC0220C	/* Slave Mode Status Register */
+#define	TWI1_SLAVE_ADDR		0xFFC02210	/* Slave Mode Address Register */
+#define	TWI1_MASTER_CTL	0xFFC02214	/* Master Mode Control Register */
+#define	TWI1_MASTER_STAT	0xFFC02218	/* Master Mode Status Register */
+#define	TWI1_MASTER_ADDR	0xFFC0221C	/* Master Mode Address Register */
+#define	TWI1_INT_STAT		0xFFC02220	/* TWI1	Master Interrupt Register */
+#define	TWI1_INT_MASK		0xFFC02224	/* TWI1	Master Interrupt Mask Register */
+#define	TWI1_FIFO_CTL		0xFFC02228	/* FIFO	Control	Register */
+#define	TWI1_FIFO_STAT		0xFFC0222C	/* FIFO	Status Register */
+#define	TWI1_XMT_DATA8		0xFFC02280	/* FIFO	Transmit Data Single Byte Register */
+#define	TWI1_XMT_DATA16		0xFFC02284	/* FIFO	Transmit Data Double Byte Register */
+#define	TWI1_RCV_DATA8		0xFFC02288	/* FIFO	Receive	Data Single Byte Register */
+#define	TWI1_RCV_DATA16		0xFFC0228C	/* FIFO	Receive	Data Double Byte Register */
+#define TWI1_REGBASE		TWI1_CLKDIV
+
+
+/* the following are for backwards compatibility */
+#define	TWI1_PRESCALE	  TWI1_CONTROL
+#define	TWI1_INT_SRC	  TWI1_INT_STAT
+#define	TWI1_INT_ENABLE	  TWI1_INT_MASK
+
+
+/* SPI1	Controller		(0xFFC02300 - 0xFFC023FF)	 */
+#define	SPI1_CTL			0xFFC02300  /* SPI1 Control Register */
+#define	SPI1_FLG			0xFFC02304  /* SPI1 Flag register */
+#define	SPI1_STAT			0xFFC02308  /* SPI1 Status register */
+#define	SPI1_TDBR			0xFFC0230C  /* SPI1 Transmit Data Buffer Register */
+#define	SPI1_RDBR			0xFFC02310  /* SPI1 Receive Data Buffer	Register */
+#define	SPI1_BAUD			0xFFC02314  /* SPI1 Baud rate Register */
+#define	SPI1_SHADOW			0xFFC02318  /* SPI1_RDBR Shadow	Register */
+#define SPI1_REGBASE			SPI1_CTL
+
+/* SPI2	Controller		(0xFFC02400 - 0xFFC024FF)	 */
+#define	SPI2_CTL			0xFFC02400  /* SPI2 Control Register */
+#define	SPI2_FLG			0xFFC02404  /* SPI2 Flag register */
+#define	SPI2_STAT			0xFFC02408  /* SPI2 Status register */
+#define	SPI2_TDBR			0xFFC0240C  /* SPI2 Transmit Data Buffer Register */
+#define	SPI2_RDBR			0xFFC02410  /* SPI2 Receive Data Buffer	Register */
+#define	SPI2_BAUD			0xFFC02414  /* SPI2 Baud rate Register */
+#define	SPI2_SHADOW			0xFFC02418  /* SPI2_RDBR Shadow	Register */
+#define SPI2_REGBASE			SPI2_CTL
+
+/* SPORT2 Controller		(0xFFC02500 - 0xFFC025FF)			 */
+#define	SPORT2_TCR1			0xFFC02500	/* SPORT2 Transmit Configuration 1 Register */
+#define	SPORT2_TCR2			0xFFC02504	/* SPORT2 Transmit Configuration 2 Register */
+#define	SPORT2_TCLKDIV		0xFFC02508	/* SPORT2 Transmit Clock Divider */
+#define	SPORT2_TFSDIV		0xFFC0250C	/* SPORT2 Transmit Frame Sync Divider */
+#define	SPORT2_TX			0xFFC02510	/* SPORT2 TX Data Register */
+#define	SPORT2_RX			0xFFC02518	/* SPORT2 RX Data Register */
+#define	SPORT2_RCR1			0xFFC02520	/* SPORT2 Transmit Configuration 1 Register */
+#define	SPORT2_RCR2			0xFFC02524	/* SPORT2 Transmit Configuration 2 Register */
+#define	SPORT2_RCLKDIV		0xFFC02528	/* SPORT2 Receive Clock	Divider */
+#define	SPORT2_RFSDIV		0xFFC0252C	/* SPORT2 Receive Frame	Sync Divider */
+#define	SPORT2_STAT			0xFFC02530	/* SPORT2 Status Register */
+#define	SPORT2_CHNL			0xFFC02534	/* SPORT2 Current Channel Register */
+#define	SPORT2_MCMC1		0xFFC02538	/* SPORT2 Multi-Channel	Configuration Register 1 */
+#define	SPORT2_MCMC2		0xFFC0253C	/* SPORT2 Multi-Channel	Configuration Register 2 */
+#define	SPORT2_MTCS0		0xFFC02540	/* SPORT2 Multi-Channel	Transmit Select	Register 0 */
+#define	SPORT2_MTCS1		0xFFC02544	/* SPORT2 Multi-Channel	Transmit Select	Register 1 */
+#define	SPORT2_MTCS2		0xFFC02548	/* SPORT2 Multi-Channel	Transmit Select	Register 2 */
+#define	SPORT2_MTCS3		0xFFC0254C	/* SPORT2 Multi-Channel	Transmit Select	Register 3 */
+#define	SPORT2_MRCS0		0xFFC02550	/* SPORT2 Multi-Channel	Receive	Select Register	0 */
+#define	SPORT2_MRCS1		0xFFC02554	/* SPORT2 Multi-Channel	Receive	Select Register	1 */
+#define	SPORT2_MRCS2		0xFFC02558	/* SPORT2 Multi-Channel	Receive	Select Register	2 */
+#define	SPORT2_MRCS3		0xFFC0255C	/* SPORT2 Multi-Channel	Receive	Select Register	3 */
+
+
+/* SPORT3 Controller		(0xFFC02600 - 0xFFC026FF)			 */
+#define	SPORT3_TCR1			0xFFC02600	/* SPORT3 Transmit Configuration 1 Register */
+#define	SPORT3_TCR2			0xFFC02604	/* SPORT3 Transmit Configuration 2 Register */
+#define	SPORT3_TCLKDIV		0xFFC02608	/* SPORT3 Transmit Clock Divider */
+#define	SPORT3_TFSDIV		0xFFC0260C	/* SPORT3 Transmit Frame Sync Divider */
+#define	SPORT3_TX			0xFFC02610	/* SPORT3 TX Data Register */
+#define	SPORT3_RX			0xFFC02618	/* SPORT3 RX Data Register */
+#define	SPORT3_RCR1			0xFFC02620	/* SPORT3 Transmit Configuration 1 Register */
+#define	SPORT3_RCR2			0xFFC02624	/* SPORT3 Transmit Configuration 2 Register */
+#define	SPORT3_RCLKDIV		0xFFC02628	/* SPORT3 Receive Clock	Divider */
+#define	SPORT3_RFSDIV		0xFFC0262C	/* SPORT3 Receive Frame	Sync Divider */
+#define	SPORT3_STAT			0xFFC02630	/* SPORT3 Status Register */
+#define	SPORT3_CHNL			0xFFC02634	/* SPORT3 Current Channel Register */
+#define	SPORT3_MCMC1		0xFFC02638	/* SPORT3 Multi-Channel	Configuration Register 1 */
+#define	SPORT3_MCMC2		0xFFC0263C	/* SPORT3 Multi-Channel	Configuration Register 2 */
+#define	SPORT3_MTCS0		0xFFC02640	/* SPORT3 Multi-Channel	Transmit Select	Register 0 */
+#define	SPORT3_MTCS1		0xFFC02644	/* SPORT3 Multi-Channel	Transmit Select	Register 1 */
+#define	SPORT3_MTCS2		0xFFC02648	/* SPORT3 Multi-Channel	Transmit Select	Register 2 */
+#define	SPORT3_MTCS3		0xFFC0264C	/* SPORT3 Multi-Channel	Transmit Select	Register 3 */
+#define	SPORT3_MRCS0		0xFFC02650	/* SPORT3 Multi-Channel	Receive	Select Register	0 */
+#define	SPORT3_MRCS1		0xFFC02654	/* SPORT3 Multi-Channel	Receive	Select Register	1 */
+#define	SPORT3_MRCS2		0xFFC02658	/* SPORT3 Multi-Channel	Receive	Select Register	2 */
+#define	SPORT3_MRCS3		0xFFC0265C	/* SPORT3 Multi-Channel	Receive	Select Register	3 */
+
+
+/* CAN Controller		(0xFFC02A00 - 0xFFC02FFF)				 */
+/* For Mailboxes 0-15											 */
+#define	CAN_MC1				0xFFC02A00	/* Mailbox config reg 1	 */
+#define	CAN_MD1				0xFFC02A04	/* Mailbox direction reg 1 */
+#define	CAN_TRS1			0xFFC02A08	/* Transmit Request Set	reg 1 */
+#define	CAN_TRR1			0xFFC02A0C	/* Transmit Request Reset reg 1 */
+#define	CAN_TA1				0xFFC02A10	/* Transmit Acknowledge	reg 1 */
+#define	CAN_AA1				0xFFC02A14	/* Transmit Abort Acknowledge reg 1 */
+#define	CAN_RMP1			0xFFC02A18	/* Receive Message Pending reg 1 */
+#define	CAN_RML1			0xFFC02A1C	/* Receive Message Lost	reg 1 */
+#define	CAN_MBTIF1			0xFFC02A20	/* Mailbox Transmit Interrupt Flag reg 1 */
+#define	CAN_MBRIF1			0xFFC02A24	/* Mailbox Receive  Interrupt Flag reg 1 */
+#define	CAN_MBIM1			0xFFC02A28	/* Mailbox Interrupt Mask reg 1 */
+#define	CAN_RFH1			0xFFC02A2C	/* Remote Frame	Handling reg 1 */
+#define	CAN_OPSS1			0xFFC02A30	/* Overwrite Protection	Single Shot Xmission reg 1 */
+
+/* For Mailboxes 16-31											 */
+#define	CAN_MC2				0xFFC02A40	/* Mailbox config reg 2	 */
+#define	CAN_MD2				0xFFC02A44	/* Mailbox direction reg 2 */
+#define	CAN_TRS2			0xFFC02A48	/* Transmit Request Set	reg 2 */
+#define	CAN_TRR2			0xFFC02A4C	/* Transmit Request Reset reg 2 */
+#define	CAN_TA2				0xFFC02A50	/* Transmit Acknowledge	reg 2 */
+#define	CAN_AA2				0xFFC02A54	/* Transmit Abort Acknowledge reg 2 */
+#define	CAN_RMP2			0xFFC02A58	/* Receive Message Pending reg 2 */
+#define	CAN_RML2			0xFFC02A5C	/* Receive Message Lost	reg 2 */
+#define	CAN_MBTIF2			0xFFC02A60	/* Mailbox Transmit Interrupt Flag reg 2 */
+#define	CAN_MBRIF2			0xFFC02A64	/* Mailbox Receive  Interrupt Flag reg 2 */
+#define	CAN_MBIM2			0xFFC02A68	/* Mailbox Interrupt Mask reg 2 */
+#define	CAN_RFH2			0xFFC02A6C	/* Remote Frame	Handling reg 2 */
+#define	CAN_OPSS2			0xFFC02A70	/* Overwrite Protection	Single Shot Xmission reg 2 */
+
+#define	CAN_CLOCK			0xFFC02A80	/* Bit Timing Configuration register 0 */
+#define	CAN_TIMING			0xFFC02A84	/* Bit Timing Configuration register 1 */
+
+#define	CAN_DEBUG			0xFFC02A88	/* Debug Register		 */
+/* the following is for	backwards compatibility */
+#define	CAN_CNF		 CAN_DEBUG
+
+#define	CAN_STATUS			0xFFC02A8C	/* Global Status Register */
+#define	CAN_CEC				0xFFC02A90	/* Error Counter Register */
+#define	CAN_GIS				0xFFC02A94	/* Global Interrupt Status Register */
+#define	CAN_GIM				0xFFC02A98	/* Global Interrupt Mask Register */
+#define	CAN_GIF				0xFFC02A9C	/* Global Interrupt Flag Register */
+#define	CAN_CONTROL			0xFFC02AA0	/* Master Control Register */
+#define	CAN_INTR			0xFFC02AA4	/* Interrupt Pending Register */
+#define	CAN_MBTD			0xFFC02AAC	/* Mailbox Temporary Disable Feature */
+#define	CAN_EWR				0xFFC02AB0	/* Programmable	Warning	Level */
+#define	CAN_ESR				0xFFC02AB4	/* Error Status	Register */
+#define	CAN_UCCNT			0xFFC02AC4	/* Universal Counter	 */
+#define	CAN_UCRC			0xFFC02AC8	/* Universal Counter Reload/Capture Register */
+#define	CAN_UCCNF			0xFFC02ACC	/* Universal Counter Configuration Register */
+
+/* Mailbox Acceptance Masks					 */
+#define	CAN_AM00L			0xFFC02B00	/* Mailbox 0 Low Acceptance Mask */
+#define	CAN_AM00H			0xFFC02B04	/* Mailbox 0 High Acceptance Mask */
+#define	CAN_AM01L			0xFFC02B08	/* Mailbox 1 Low Acceptance Mask */
+#define	CAN_AM01H			0xFFC02B0C	/* Mailbox 1 High Acceptance Mask */
+#define	CAN_AM02L			0xFFC02B10	/* Mailbox 2 Low Acceptance Mask */
+#define	CAN_AM02H			0xFFC02B14	/* Mailbox 2 High Acceptance Mask */
+#define	CAN_AM03L			0xFFC02B18	/* Mailbox 3 Low Acceptance Mask */
+#define	CAN_AM03H			0xFFC02B1C	/* Mailbox 3 High Acceptance Mask */
+#define	CAN_AM04L			0xFFC02B20	/* Mailbox 4 Low Acceptance Mask */
+#define	CAN_AM04H			0xFFC02B24	/* Mailbox 4 High Acceptance Mask */
+#define	CAN_AM05L			0xFFC02B28	/* Mailbox 5 Low Acceptance Mask */
+#define	CAN_AM05H			0xFFC02B2C	/* Mailbox 5 High Acceptance Mask */
+#define	CAN_AM06L			0xFFC02B30	/* Mailbox 6 Low Acceptance Mask */
+#define	CAN_AM06H			0xFFC02B34	/* Mailbox 6 High Acceptance Mask */
+#define	CAN_AM07L			0xFFC02B38	/* Mailbox 7 Low Acceptance Mask */
+#define	CAN_AM07H			0xFFC02B3C	/* Mailbox 7 High Acceptance Mask */
+#define	CAN_AM08L			0xFFC02B40	/* Mailbox 8 Low Acceptance Mask */
+#define	CAN_AM08H			0xFFC02B44	/* Mailbox 8 High Acceptance Mask */
+#define	CAN_AM09L			0xFFC02B48	/* Mailbox 9 Low Acceptance Mask */
+#define	CAN_AM09H			0xFFC02B4C	/* Mailbox 9 High Acceptance Mask */
+#define	CAN_AM10L			0xFFC02B50	/* Mailbox 10 Low Acceptance Mask */
+#define	CAN_AM10H			0xFFC02B54	/* Mailbox 10 High Acceptance Mask */
+#define	CAN_AM11L			0xFFC02B58	/* Mailbox 11 Low Acceptance Mask */
+#define	CAN_AM11H			0xFFC02B5C	/* Mailbox 11 High Acceptance Mask */
+#define	CAN_AM12L			0xFFC02B60	/* Mailbox 12 Low Acceptance Mask */
+#define	CAN_AM12H			0xFFC02B64	/* Mailbox 12 High Acceptance Mask */
+#define	CAN_AM13L			0xFFC02B68	/* Mailbox 13 Low Acceptance Mask */
+#define	CAN_AM13H			0xFFC02B6C	/* Mailbox 13 High Acceptance Mask */
+#define	CAN_AM14L			0xFFC02B70	/* Mailbox 14 Low Acceptance Mask */
+#define	CAN_AM14H			0xFFC02B74	/* Mailbox 14 High Acceptance Mask */
+#define	CAN_AM15L			0xFFC02B78	/* Mailbox 15 Low Acceptance Mask */
+#define	CAN_AM15H			0xFFC02B7C	/* Mailbox 15 High Acceptance Mask */
+
+#define	CAN_AM16L			0xFFC02B80	/* Mailbox 16 Low Acceptance Mask */
+#define	CAN_AM16H			0xFFC02B84	/* Mailbox 16 High Acceptance Mask */
+#define	CAN_AM17L			0xFFC02B88	/* Mailbox 17 Low Acceptance Mask */
+#define	CAN_AM17H			0xFFC02B8C	/* Mailbox 17 High Acceptance Mask */
+#define	CAN_AM18L			0xFFC02B90	/* Mailbox 18 Low Acceptance Mask */
+#define	CAN_AM18H			0xFFC02B94	/* Mailbox 18 High Acceptance Mask */
+#define	CAN_AM19L			0xFFC02B98	/* Mailbox 19 Low Acceptance Mask */
+#define	CAN_AM19H			0xFFC02B9C	/* Mailbox 19 High Acceptance Mask */
+#define	CAN_AM20L			0xFFC02BA0	/* Mailbox 20 Low Acceptance Mask */
+#define	CAN_AM20H			0xFFC02BA4	/* Mailbox 20 High Acceptance Mask */
+#define	CAN_AM21L			0xFFC02BA8	/* Mailbox 21 Low Acceptance Mask */
+#define	CAN_AM21H			0xFFC02BAC	/* Mailbox 21 High Acceptance Mask */
+#define	CAN_AM22L			0xFFC02BB0	/* Mailbox 22 Low Acceptance Mask */
+#define	CAN_AM22H			0xFFC02BB4	/* Mailbox 22 High Acceptance Mask */
+#define	CAN_AM23L			0xFFC02BB8	/* Mailbox 23 Low Acceptance Mask */
+#define	CAN_AM23H			0xFFC02BBC	/* Mailbox 23 High Acceptance Mask */
+#define	CAN_AM24L			0xFFC02BC0	/* Mailbox 24 Low Acceptance Mask */
+#define	CAN_AM24H			0xFFC02BC4	/* Mailbox 24 High Acceptance Mask */
+#define	CAN_AM25L			0xFFC02BC8	/* Mailbox 25 Low Acceptance Mask */
+#define	CAN_AM25H			0xFFC02BCC	/* Mailbox 25 High Acceptance Mask */
+#define	CAN_AM26L			0xFFC02BD0	/* Mailbox 26 Low Acceptance Mask */
+#define	CAN_AM26H			0xFFC02BD4	/* Mailbox 26 High Acceptance Mask */
+#define	CAN_AM27L			0xFFC02BD8	/* Mailbox 27 Low Acceptance Mask */
+#define	CAN_AM27H			0xFFC02BDC	/* Mailbox 27 High Acceptance Mask */
+#define	CAN_AM28L			0xFFC02BE0	/* Mailbox 28 Low Acceptance Mask */
+#define	CAN_AM28H			0xFFC02BE4	/* Mailbox 28 High Acceptance Mask */
+#define	CAN_AM29L			0xFFC02BE8	/* Mailbox 29 Low Acceptance Mask */
+#define	CAN_AM29H			0xFFC02BEC	/* Mailbox 29 High Acceptance Mask */
+#define	CAN_AM30L			0xFFC02BF0	/* Mailbox 30 Low Acceptance Mask */
+#define	CAN_AM30H			0xFFC02BF4	/* Mailbox 30 High Acceptance Mask */
+#define	CAN_AM31L			0xFFC02BF8	/* Mailbox 31 Low Acceptance Mask */
+#define	CAN_AM31H			0xFFC02BFC	/* Mailbox 31 High Acceptance Mask */
+
+/* CAN Acceptance Mask Macros */
+#define	CAN_AM_L(x)			(CAN_AM00L+((x)*0x8))
+#define	CAN_AM_H(x)			(CAN_AM00H+((x)*0x8))
+
+/* Mailbox Registers									 */
+#define	CAN_MB00_DATA0		0xFFC02C00	/* Mailbox 0 Data Word 0 [15:0]	Register */
+#define	CAN_MB00_DATA1		0xFFC02C04	/* Mailbox 0 Data Word 1 [31:16] Register */
+#define	CAN_MB00_DATA2		0xFFC02C08	/* Mailbox 0 Data Word 2 [47:32] Register */
+#define	CAN_MB00_DATA3		0xFFC02C0C	/* Mailbox 0 Data Word 3 [63:48] Register */
+#define	CAN_MB00_LENGTH		0xFFC02C10	/* Mailbox 0 Data Length Code Register */
+#define	CAN_MB00_TIMESTAMP	0xFFC02C14	/* Mailbox 0 Time Stamp	Value Register */
+#define	CAN_MB00_ID0		0xFFC02C18	/* Mailbox 0 Identifier	Low Register */
+#define	CAN_MB00_ID1		0xFFC02C1C	/* Mailbox 0 Identifier	High Register */
+
+#define	CAN_MB01_DATA0		0xFFC02C20	/* Mailbox 1 Data Word 0 [15:0]	Register */
+#define	CAN_MB01_DATA1		0xFFC02C24	/* Mailbox 1 Data Word 1 [31:16] Register */
+#define	CAN_MB01_DATA2		0xFFC02C28	/* Mailbox 1 Data Word 2 [47:32] Register */
+#define	CAN_MB01_DATA3		0xFFC02C2C	/* Mailbox 1 Data Word 3 [63:48] Register */
+#define	CAN_MB01_LENGTH		0xFFC02C30	/* Mailbox 1 Data Length Code Register */
+#define	CAN_MB01_TIMESTAMP	0xFFC02C34	/* Mailbox 1 Time Stamp	Value Register */
+#define	CAN_MB01_ID0		0xFFC02C38	/* Mailbox 1 Identifier	Low Register */
+#define	CAN_MB01_ID1		0xFFC02C3C	/* Mailbox 1 Identifier	High Register */
+
+#define	CAN_MB02_DATA0		0xFFC02C40	/* Mailbox 2 Data Word 0 [15:0]	Register */
+#define	CAN_MB02_DATA1		0xFFC02C44	/* Mailbox 2 Data Word 1 [31:16] Register */
+#define	CAN_MB02_DATA2		0xFFC02C48	/* Mailbox 2 Data Word 2 [47:32] Register */
+#define	CAN_MB02_DATA3		0xFFC02C4C	/* Mailbox 2 Data Word 3 [63:48] Register */
+#define	CAN_MB02_LENGTH		0xFFC02C50	/* Mailbox 2 Data Length Code Register */
+#define	CAN_MB02_TIMESTAMP	0xFFC02C54	/* Mailbox 2 Time Stamp	Value Register */
+#define	CAN_MB02_ID0		0xFFC02C58	/* Mailbox 2 Identifier	Low Register */
+#define	CAN_MB02_ID1		0xFFC02C5C	/* Mailbox 2 Identifier	High Register */
+
+#define	CAN_MB03_DATA0		0xFFC02C60	/* Mailbox 3 Data Word 0 [15:0]	Register */
+#define	CAN_MB03_DATA1		0xFFC02C64	/* Mailbox 3 Data Word 1 [31:16] Register */
+#define	CAN_MB03_DATA2		0xFFC02C68	/* Mailbox 3 Data Word 2 [47:32] Register */
+#define	CAN_MB03_DATA3		0xFFC02C6C	/* Mailbox 3 Data Word 3 [63:48] Register */
+#define	CAN_MB03_LENGTH		0xFFC02C70	/* Mailbox 3 Data Length Code Register */
+#define	CAN_MB03_TIMESTAMP	0xFFC02C74	/* Mailbox 3 Time Stamp	Value Register */
+#define	CAN_MB03_ID0		0xFFC02C78	/* Mailbox 3 Identifier	Low Register */
+#define	CAN_MB03_ID1		0xFFC02C7C	/* Mailbox 3 Identifier	High Register */
+
+#define	CAN_MB04_DATA0		0xFFC02C80	/* Mailbox 4 Data Word 0 [15:0]	Register */
+#define	CAN_MB04_DATA1		0xFFC02C84	/* Mailbox 4 Data Word 1 [31:16] Register */
+#define	CAN_MB04_DATA2		0xFFC02C88	/* Mailbox 4 Data Word 2 [47:32] Register */
+#define	CAN_MB04_DATA3		0xFFC02C8C	/* Mailbox 4 Data Word 3 [63:48] Register */
+#define	CAN_MB04_LENGTH		0xFFC02C90	/* Mailbox 4 Data Length Code Register */
+#define	CAN_MB04_TIMESTAMP	0xFFC02C94	/* Mailbox 4 Time Stamp	Value Register */
+#define	CAN_MB04_ID0		0xFFC02C98	/* Mailbox 4 Identifier	Low Register */
+#define	CAN_MB04_ID1		0xFFC02C9C	/* Mailbox 4 Identifier	High Register */
+
+#define	CAN_MB05_DATA0		0xFFC02CA0	/* Mailbox 5 Data Word 0 [15:0]	Register */
+#define	CAN_MB05_DATA1		0xFFC02CA4	/* Mailbox 5 Data Word 1 [31:16] Register */
+#define	CAN_MB05_DATA2		0xFFC02CA8	/* Mailbox 5 Data Word 2 [47:32] Register */
+#define	CAN_MB05_DATA3		0xFFC02CAC	/* Mailbox 5 Data Word 3 [63:48] Register */
+#define	CAN_MB05_LENGTH		0xFFC02CB0	/* Mailbox 5 Data Length Code Register */
+#define	CAN_MB05_TIMESTAMP	0xFFC02CB4	/* Mailbox 5 Time Stamp	Value Register */
+#define	CAN_MB05_ID0		0xFFC02CB8	/* Mailbox 5 Identifier	Low Register */
+#define	CAN_MB05_ID1		0xFFC02CBC	/* Mailbox 5 Identifier	High Register */
+
+#define	CAN_MB06_DATA0		0xFFC02CC0	/* Mailbox 6 Data Word 0 [15:0]	Register */
+#define	CAN_MB06_DATA1		0xFFC02CC4	/* Mailbox 6 Data Word 1 [31:16] Register */
+#define	CAN_MB06_DATA2		0xFFC02CC8	/* Mailbox 6 Data Word 2 [47:32] Register */
+#define	CAN_MB06_DATA3		0xFFC02CCC	/* Mailbox 6 Data Word 3 [63:48] Register */
+#define	CAN_MB06_LENGTH		0xFFC02CD0	/* Mailbox 6 Data Length Code Register */
+#define	CAN_MB06_TIMESTAMP	0xFFC02CD4	/* Mailbox 6 Time Stamp	Value Register */
+#define	CAN_MB06_ID0		0xFFC02CD8	/* Mailbox 6 Identifier	Low Register */
+#define	CAN_MB06_ID1		0xFFC02CDC	/* Mailbox 6 Identifier	High Register */
+
+#define	CAN_MB07_DATA0		0xFFC02CE0	/* Mailbox 7 Data Word 0 [15:0]	Register */
+#define	CAN_MB07_DATA1		0xFFC02CE4	/* Mailbox 7 Data Word 1 [31:16] Register */
+#define	CAN_MB07_DATA2		0xFFC02CE8	/* Mailbox 7 Data Word 2 [47:32] Register */
+#define	CAN_MB07_DATA3		0xFFC02CEC	/* Mailbox 7 Data Word 3 [63:48] Register */
+#define	CAN_MB07_LENGTH		0xFFC02CF0	/* Mailbox 7 Data Length Code Register */
+#define	CAN_MB07_TIMESTAMP	0xFFC02CF4	/* Mailbox 7 Time Stamp	Value Register */
+#define	CAN_MB07_ID0		0xFFC02CF8	/* Mailbox 7 Identifier	Low Register */
+#define	CAN_MB07_ID1		0xFFC02CFC	/* Mailbox 7 Identifier	High Register */
+
+#define	CAN_MB08_DATA0		0xFFC02D00	/* Mailbox 8 Data Word 0 [15:0]	Register */
+#define	CAN_MB08_DATA1		0xFFC02D04	/* Mailbox 8 Data Word 1 [31:16] Register */
+#define	CAN_MB08_DATA2		0xFFC02D08	/* Mailbox 8 Data Word 2 [47:32] Register */
+#define	CAN_MB08_DATA3		0xFFC02D0C	/* Mailbox 8 Data Word 3 [63:48] Register */
+#define	CAN_MB08_LENGTH		0xFFC02D10	/* Mailbox 8 Data Length Code Register */
+#define	CAN_MB08_TIMESTAMP	0xFFC02D14	/* Mailbox 8 Time Stamp	Value Register */
+#define	CAN_MB08_ID0		0xFFC02D18	/* Mailbox 8 Identifier	Low Register */
+#define	CAN_MB08_ID1		0xFFC02D1C	/* Mailbox 8 Identifier	High Register */
+
+#define	CAN_MB09_DATA0		0xFFC02D20	/* Mailbox 9 Data Word 0 [15:0]	Register */
+#define	CAN_MB09_DATA1		0xFFC02D24	/* Mailbox 9 Data Word 1 [31:16] Register */
+#define	CAN_MB09_DATA2		0xFFC02D28	/* Mailbox 9 Data Word 2 [47:32] Register */
+#define	CAN_MB09_DATA3		0xFFC02D2C	/* Mailbox 9 Data Word 3 [63:48] Register */
+#define	CAN_MB09_LENGTH		0xFFC02D30	/* Mailbox 9 Data Length Code Register */
+#define	CAN_MB09_TIMESTAMP	0xFFC02D34	/* Mailbox 9 Time Stamp	Value Register */
+#define	CAN_MB09_ID0		0xFFC02D38	/* Mailbox 9 Identifier	Low Register */
+#define	CAN_MB09_ID1		0xFFC02D3C	/* Mailbox 9 Identifier	High Register */
+
+#define	CAN_MB10_DATA0		0xFFC02D40	/* Mailbox 10 Data Word	0 [15:0] Register */
+#define	CAN_MB10_DATA1		0xFFC02D44	/* Mailbox 10 Data Word	1 [31:16] Register */
+#define	CAN_MB10_DATA2		0xFFC02D48	/* Mailbox 10 Data Word	2 [47:32] Register */
+#define	CAN_MB10_DATA3		0xFFC02D4C	/* Mailbox 10 Data Word	3 [63:48] Register */
+#define	CAN_MB10_LENGTH		0xFFC02D50	/* Mailbox 10 Data Length Code Register */
+#define	CAN_MB10_TIMESTAMP	0xFFC02D54	/* Mailbox 10 Time Stamp Value Register */
+#define	CAN_MB10_ID0		0xFFC02D58	/* Mailbox 10 Identifier Low Register */
+#define	CAN_MB10_ID1		0xFFC02D5C	/* Mailbox 10 Identifier High Register */
+
+#define	CAN_MB11_DATA0		0xFFC02D60	/* Mailbox 11 Data Word	0 [15:0] Register */
+#define	CAN_MB11_DATA1		0xFFC02D64	/* Mailbox 11 Data Word	1 [31:16] Register */
+#define	CAN_MB11_DATA2		0xFFC02D68	/* Mailbox 11 Data Word	2 [47:32] Register */
+#define	CAN_MB11_DATA3		0xFFC02D6C	/* Mailbox 11 Data Word	3 [63:48] Register */
+#define	CAN_MB11_LENGTH		0xFFC02D70	/* Mailbox 11 Data Length Code Register */
+#define	CAN_MB11_TIMESTAMP	0xFFC02D74	/* Mailbox 11 Time Stamp Value Register */
+#define	CAN_MB11_ID0		0xFFC02D78	/* Mailbox 11 Identifier Low Register */
+#define	CAN_MB11_ID1		0xFFC02D7C	/* Mailbox 11 Identifier High Register */
+
+#define	CAN_MB12_DATA0		0xFFC02D80	/* Mailbox 12 Data Word	0 [15:0] Register */
+#define	CAN_MB12_DATA1		0xFFC02D84	/* Mailbox 12 Data Word	1 [31:16] Register */
+#define	CAN_MB12_DATA2		0xFFC02D88	/* Mailbox 12 Data Word	2 [47:32] Register */
+#define	CAN_MB12_DATA3		0xFFC02D8C	/* Mailbox 12 Data Word	3 [63:48] Register */
+#define	CAN_MB12_LENGTH		0xFFC02D90	/* Mailbox 12 Data Length Code Register */
+#define	CAN_MB12_TIMESTAMP	0xFFC02D94	/* Mailbox 12 Time Stamp Value Register */
+#define	CAN_MB12_ID0		0xFFC02D98	/* Mailbox 12 Identifier Low Register */
+#define	CAN_MB12_ID1		0xFFC02D9C	/* Mailbox 12 Identifier High Register */
+
+#define	CAN_MB13_DATA0		0xFFC02DA0	/* Mailbox 13 Data Word	0 [15:0] Register */
+#define	CAN_MB13_DATA1		0xFFC02DA4	/* Mailbox 13 Data Word	1 [31:16] Register */
+#define	CAN_MB13_DATA2		0xFFC02DA8	/* Mailbox 13 Data Word	2 [47:32] Register */
+#define	CAN_MB13_DATA3		0xFFC02DAC	/* Mailbox 13 Data Word	3 [63:48] Register */
+#define	CAN_MB13_LENGTH		0xFFC02DB0	/* Mailbox 13 Data Length Code Register */
+#define	CAN_MB13_TIMESTAMP	0xFFC02DB4	/* Mailbox 13 Time Stamp Value Register */
+#define	CAN_MB13_ID0		0xFFC02DB8	/* Mailbox 13 Identifier Low Register */
+#define	CAN_MB13_ID1		0xFFC02DBC	/* Mailbox 13 Identifier High Register */
+
+#define	CAN_MB14_DATA0		0xFFC02DC0	/* Mailbox 14 Data Word	0 [15:0] Register */
+#define	CAN_MB14_DATA1		0xFFC02DC4	/* Mailbox 14 Data Word	1 [31:16] Register */
+#define	CAN_MB14_DATA2		0xFFC02DC8	/* Mailbox 14 Data Word	2 [47:32] Register */
+#define	CAN_MB14_DATA3		0xFFC02DCC	/* Mailbox 14 Data Word	3 [63:48] Register */
+#define	CAN_MB14_LENGTH		0xFFC02DD0	/* Mailbox 14 Data Length Code Register */
+#define	CAN_MB14_TIMESTAMP	0xFFC02DD4	/* Mailbox 14 Time Stamp Value Register */
+#define	CAN_MB14_ID0		0xFFC02DD8	/* Mailbox 14 Identifier Low Register */
+#define	CAN_MB14_ID1		0xFFC02DDC	/* Mailbox 14 Identifier High Register */
+
+#define	CAN_MB15_DATA0		0xFFC02DE0	/* Mailbox 15 Data Word	0 [15:0] Register */
+#define	CAN_MB15_DATA1		0xFFC02DE4	/* Mailbox 15 Data Word	1 [31:16] Register */
+#define	CAN_MB15_DATA2		0xFFC02DE8	/* Mailbox 15 Data Word	2 [47:32] Register */
+#define	CAN_MB15_DATA3		0xFFC02DEC	/* Mailbox 15 Data Word	3 [63:48] Register */
+#define	CAN_MB15_LENGTH		0xFFC02DF0	/* Mailbox 15 Data Length Code Register */
+#define	CAN_MB15_TIMESTAMP	0xFFC02DF4	/* Mailbox 15 Time Stamp Value Register */
+#define	CAN_MB15_ID0		0xFFC02DF8	/* Mailbox 15 Identifier Low Register */
+#define	CAN_MB15_ID1		0xFFC02DFC	/* Mailbox 15 Identifier High Register */
+
+#define	CAN_MB16_DATA0		0xFFC02E00	/* Mailbox 16 Data Word	0 [15:0] Register */
+#define	CAN_MB16_DATA1		0xFFC02E04	/* Mailbox 16 Data Word	1 [31:16] Register */
+#define	CAN_MB16_DATA2		0xFFC02E08	/* Mailbox 16 Data Word	2 [47:32] Register */
+#define	CAN_MB16_DATA3		0xFFC02E0C	/* Mailbox 16 Data Word	3 [63:48] Register */
+#define	CAN_MB16_LENGTH		0xFFC02E10	/* Mailbox 16 Data Length Code Register */
+#define	CAN_MB16_TIMESTAMP	0xFFC02E14	/* Mailbox 16 Time Stamp Value Register */
+#define	CAN_MB16_ID0		0xFFC02E18	/* Mailbox 16 Identifier Low Register */
+#define	CAN_MB16_ID1		0xFFC02E1C	/* Mailbox 16 Identifier High Register */
+
+#define	CAN_MB17_DATA0		0xFFC02E20	/* Mailbox 17 Data Word	0 [15:0] Register */
+#define	CAN_MB17_DATA1		0xFFC02E24	/* Mailbox 17 Data Word	1 [31:16] Register */
+#define	CAN_MB17_DATA2		0xFFC02E28	/* Mailbox 17 Data Word	2 [47:32] Register */
+#define	CAN_MB17_DATA3		0xFFC02E2C	/* Mailbox 17 Data Word	3 [63:48] Register */
+#define	CAN_MB17_LENGTH		0xFFC02E30	/* Mailbox 17 Data Length Code Register */
+#define	CAN_MB17_TIMESTAMP	0xFFC02E34	/* Mailbox 17 Time Stamp Value Register */
+#define	CAN_MB17_ID0		0xFFC02E38	/* Mailbox 17 Identifier Low Register */
+#define	CAN_MB17_ID1		0xFFC02E3C	/* Mailbox 17 Identifier High Register */
+
+#define	CAN_MB18_DATA0		0xFFC02E40	/* Mailbox 18 Data Word	0 [15:0] Register */
+#define	CAN_MB18_DATA1		0xFFC02E44	/* Mailbox 18 Data Word	1 [31:16] Register */
+#define	CAN_MB18_DATA2		0xFFC02E48	/* Mailbox 18 Data Word	2 [47:32] Register */
+#define	CAN_MB18_DATA3		0xFFC02E4C	/* Mailbox 18 Data Word	3 [63:48] Register */
+#define	CAN_MB18_LENGTH		0xFFC02E50	/* Mailbox 18 Data Length Code Register */
+#define	CAN_MB18_TIMESTAMP	0xFFC02E54	/* Mailbox 18 Time Stamp Value Register */
+#define	CAN_MB18_ID0		0xFFC02E58	/* Mailbox 18 Identifier Low Register */
+#define	CAN_MB18_ID1		0xFFC02E5C	/* Mailbox 18 Identifier High Register */
+
+#define	CAN_MB19_DATA0		0xFFC02E60	/* Mailbox 19 Data Word	0 [15:0] Register */
+#define	CAN_MB19_DATA1		0xFFC02E64	/* Mailbox 19 Data Word	1 [31:16] Register */
+#define	CAN_MB19_DATA2		0xFFC02E68	/* Mailbox 19 Data Word	2 [47:32] Register */
+#define	CAN_MB19_DATA3		0xFFC02E6C	/* Mailbox 19 Data Word	3 [63:48] Register */
+#define	CAN_MB19_LENGTH		0xFFC02E70	/* Mailbox 19 Data Length Code Register */
+#define	CAN_MB19_TIMESTAMP	0xFFC02E74	/* Mailbox 19 Time Stamp Value Register */
+#define	CAN_MB19_ID0		0xFFC02E78	/* Mailbox 19 Identifier Low Register */
+#define	CAN_MB19_ID1		0xFFC02E7C	/* Mailbox 19 Identifier High Register */
+
+#define	CAN_MB20_DATA0		0xFFC02E80	/* Mailbox 20 Data Word	0 [15:0] Register */
+#define	CAN_MB20_DATA1		0xFFC02E84	/* Mailbox 20 Data Word	1 [31:16] Register */
+#define	CAN_MB20_DATA2		0xFFC02E88	/* Mailbox 20 Data Word	2 [47:32] Register */
+#define	CAN_MB20_DATA3		0xFFC02E8C	/* Mailbox 20 Data Word	3 [63:48] Register */
+#define	CAN_MB20_LENGTH		0xFFC02E90	/* Mailbox 20 Data Length Code Register */
+#define	CAN_MB20_TIMESTAMP	0xFFC02E94	/* Mailbox 20 Time Stamp Value Register */
+#define	CAN_MB20_ID0		0xFFC02E98	/* Mailbox 20 Identifier Low Register */
+#define	CAN_MB20_ID1		0xFFC02E9C	/* Mailbox 20 Identifier High Register */
+
+#define	CAN_MB21_DATA0		0xFFC02EA0	/* Mailbox 21 Data Word	0 [15:0] Register */
+#define	CAN_MB21_DATA1		0xFFC02EA4	/* Mailbox 21 Data Word	1 [31:16] Register */
+#define	CAN_MB21_DATA2		0xFFC02EA8	/* Mailbox 21 Data Word	2 [47:32] Register */
+#define	CAN_MB21_DATA3		0xFFC02EAC	/* Mailbox 21 Data Word	3 [63:48] Register */
+#define	CAN_MB21_LENGTH		0xFFC02EB0	/* Mailbox 21 Data Length Code Register */
+#define	CAN_MB21_TIMESTAMP	0xFFC02EB4	/* Mailbox 21 Time Stamp Value Register */
+#define	CAN_MB21_ID0		0xFFC02EB8	/* Mailbox 21 Identifier Low Register */
+#define	CAN_MB21_ID1		0xFFC02EBC	/* Mailbox 21 Identifier High Register */
+
+#define	CAN_MB22_DATA0		0xFFC02EC0	/* Mailbox 22 Data Word	0 [15:0] Register */
+#define	CAN_MB22_DATA1		0xFFC02EC4	/* Mailbox 22 Data Word	1 [31:16] Register */
+#define	CAN_MB22_DATA2		0xFFC02EC8	/* Mailbox 22 Data Word	2 [47:32] Register */
+#define	CAN_MB22_DATA3		0xFFC02ECC	/* Mailbox 22 Data Word	3 [63:48] Register */
+#define	CAN_MB22_LENGTH		0xFFC02ED0	/* Mailbox 22 Data Length Code Register */
+#define	CAN_MB22_TIMESTAMP	0xFFC02ED4	/* Mailbox 22 Time Stamp Value Register */
+#define	CAN_MB22_ID0		0xFFC02ED8	/* Mailbox 22 Identifier Low Register */
+#define	CAN_MB22_ID1		0xFFC02EDC	/* Mailbox 22 Identifier High Register */
+
+#define	CAN_MB23_DATA0		0xFFC02EE0	/* Mailbox 23 Data Word	0 [15:0] Register */
+#define	CAN_MB23_DATA1		0xFFC02EE4	/* Mailbox 23 Data Word	1 [31:16] Register */
+#define	CAN_MB23_DATA2		0xFFC02EE8	/* Mailbox 23 Data Word	2 [47:32] Register */
+#define	CAN_MB23_DATA3		0xFFC02EEC	/* Mailbox 23 Data Word	3 [63:48] Register */
+#define	CAN_MB23_LENGTH		0xFFC02EF0	/* Mailbox 23 Data Length Code Register */
+#define	CAN_MB23_TIMESTAMP	0xFFC02EF4	/* Mailbox 23 Time Stamp Value Register */
+#define	CAN_MB23_ID0		0xFFC02EF8	/* Mailbox 23 Identifier Low Register */
+#define	CAN_MB23_ID1		0xFFC02EFC	/* Mailbox 23 Identifier High Register */
+
+#define	CAN_MB24_DATA0		0xFFC02F00	/* Mailbox 24 Data Word	0 [15:0] Register */
+#define	CAN_MB24_DATA1		0xFFC02F04	/* Mailbox 24 Data Word	1 [31:16] Register */
+#define	CAN_MB24_DATA2		0xFFC02F08	/* Mailbox 24 Data Word	2 [47:32] Register */
+#define	CAN_MB24_DATA3		0xFFC02F0C	/* Mailbox 24 Data Word	3 [63:48] Register */
+#define	CAN_MB24_LENGTH		0xFFC02F10	/* Mailbox 24 Data Length Code Register */
+#define	CAN_MB24_TIMESTAMP	0xFFC02F14	/* Mailbox 24 Time Stamp Value Register */
+#define	CAN_MB24_ID0		0xFFC02F18	/* Mailbox 24 Identifier Low Register */
+#define	CAN_MB24_ID1		0xFFC02F1C	/* Mailbox 24 Identifier High Register */
+
+#define	CAN_MB25_DATA0		0xFFC02F20	/* Mailbox 25 Data Word	0 [15:0] Register */
+#define	CAN_MB25_DATA1		0xFFC02F24	/* Mailbox 25 Data Word	1 [31:16] Register */
+#define	CAN_MB25_DATA2		0xFFC02F28	/* Mailbox 25 Data Word	2 [47:32] Register */
+#define	CAN_MB25_DATA3		0xFFC02F2C	/* Mailbox 25 Data Word	3 [63:48] Register */
+#define	CAN_MB25_LENGTH		0xFFC02F30	/* Mailbox 25 Data Length Code Register */
+#define	CAN_MB25_TIMESTAMP	0xFFC02F34	/* Mailbox 25 Time Stamp Value Register */
+#define	CAN_MB25_ID0		0xFFC02F38	/* Mailbox 25 Identifier Low Register */
+#define	CAN_MB25_ID1		0xFFC02F3C	/* Mailbox 25 Identifier High Register */
+
+#define	CAN_MB26_DATA0		0xFFC02F40	/* Mailbox 26 Data Word	0 [15:0] Register */
+#define	CAN_MB26_DATA1		0xFFC02F44	/* Mailbox 26 Data Word	1 [31:16] Register */
+#define	CAN_MB26_DATA2		0xFFC02F48	/* Mailbox 26 Data Word	2 [47:32] Register */
+#define	CAN_MB26_DATA3		0xFFC02F4C	/* Mailbox 26 Data Word	3 [63:48] Register */
+#define	CAN_MB26_LENGTH		0xFFC02F50	/* Mailbox 26 Data Length Code Register */
+#define	CAN_MB26_TIMESTAMP	0xFFC02F54	/* Mailbox 26 Time Stamp Value Register */
+#define	CAN_MB26_ID0		0xFFC02F58	/* Mailbox 26 Identifier Low Register */
+#define	CAN_MB26_ID1		0xFFC02F5C	/* Mailbox 26 Identifier High Register */
+
+#define	CAN_MB27_DATA0		0xFFC02F60	/* Mailbox 27 Data Word	0 [15:0] Register */
+#define	CAN_MB27_DATA1		0xFFC02F64	/* Mailbox 27 Data Word	1 [31:16] Register */
+#define	CAN_MB27_DATA2		0xFFC02F68	/* Mailbox 27 Data Word	2 [47:32] Register */
+#define	CAN_MB27_DATA3		0xFFC02F6C	/* Mailbox 27 Data Word	3 [63:48] Register */
+#define	CAN_MB27_LENGTH		0xFFC02F70	/* Mailbox 27 Data Length Code Register */
+#define	CAN_MB27_TIMESTAMP	0xFFC02F74	/* Mailbox 27 Time Stamp Value Register */
+#define	CAN_MB27_ID0		0xFFC02F78	/* Mailbox 27 Identifier Low Register */
+#define	CAN_MB27_ID1		0xFFC02F7C	/* Mailbox 27 Identifier High Register */
+
+#define	CAN_MB28_DATA0		0xFFC02F80	/* Mailbox 28 Data Word	0 [15:0] Register */
+#define	CAN_MB28_DATA1		0xFFC02F84	/* Mailbox 28 Data Word	1 [31:16] Register */
+#define	CAN_MB28_DATA2		0xFFC02F88	/* Mailbox 28 Data Word	2 [47:32] Register */
+#define	CAN_MB28_DATA3		0xFFC02F8C	/* Mailbox 28 Data Word	3 [63:48] Register */
+#define	CAN_MB28_LENGTH		0xFFC02F90	/* Mailbox 28 Data Length Code Register */
+#define	CAN_MB28_TIMESTAMP	0xFFC02F94	/* Mailbox 28 Time Stamp Value Register */
+#define	CAN_MB28_ID0		0xFFC02F98	/* Mailbox 28 Identifier Low Register */
+#define	CAN_MB28_ID1		0xFFC02F9C	/* Mailbox 28 Identifier High Register */
+
+#define	CAN_MB29_DATA0		0xFFC02FA0	/* Mailbox 29 Data Word	0 [15:0] Register */
+#define	CAN_MB29_DATA1		0xFFC02FA4	/* Mailbox 29 Data Word	1 [31:16] Register */
+#define	CAN_MB29_DATA2		0xFFC02FA8	/* Mailbox 29 Data Word	2 [47:32] Register */
+#define	CAN_MB29_DATA3		0xFFC02FAC	/* Mailbox 29 Data Word	3 [63:48] Register */
+#define	CAN_MB29_LENGTH		0xFFC02FB0	/* Mailbox 29 Data Length Code Register */
+#define	CAN_MB29_TIMESTAMP	0xFFC02FB4	/* Mailbox 29 Time Stamp Value Register */
+#define	CAN_MB29_ID0		0xFFC02FB8	/* Mailbox 29 Identifier Low Register */
+#define	CAN_MB29_ID1		0xFFC02FBC	/* Mailbox 29 Identifier High Register */
+
+#define	CAN_MB30_DATA0		0xFFC02FC0	/* Mailbox 30 Data Word	0 [15:0] Register */
+#define	CAN_MB30_DATA1		0xFFC02FC4	/* Mailbox 30 Data Word	1 [31:16] Register */
+#define	CAN_MB30_DATA2		0xFFC02FC8	/* Mailbox 30 Data Word	2 [47:32] Register */
+#define	CAN_MB30_DATA3		0xFFC02FCC	/* Mailbox 30 Data Word	3 [63:48] Register */
+#define	CAN_MB30_LENGTH		0xFFC02FD0	/* Mailbox 30 Data Length Code Register */
+#define	CAN_MB30_TIMESTAMP	0xFFC02FD4	/* Mailbox 30 Time Stamp Value Register */
+#define	CAN_MB30_ID0		0xFFC02FD8	/* Mailbox 30 Identifier Low Register */
+#define	CAN_MB30_ID1		0xFFC02FDC	/* Mailbox 30 Identifier High Register */
+
+#define	CAN_MB31_DATA0		0xFFC02FE0	/* Mailbox 31 Data Word	0 [15:0] Register */
+#define	CAN_MB31_DATA1		0xFFC02FE4	/* Mailbox 31 Data Word	1 [31:16] Register */
+#define	CAN_MB31_DATA2		0xFFC02FE8	/* Mailbox 31 Data Word	2 [47:32] Register */
+#define	CAN_MB31_DATA3		0xFFC02FEC	/* Mailbox 31 Data Word	3 [63:48] Register */
+#define	CAN_MB31_LENGTH		0xFFC02FF0	/* Mailbox 31 Data Length Code Register */
+#define	CAN_MB31_TIMESTAMP	0xFFC02FF4	/* Mailbox 31 Time Stamp Value Register */
+#define	CAN_MB31_ID0		0xFFC02FF8	/* Mailbox 31 Identifier Low Register */
+#define	CAN_MB31_ID1		0xFFC02FFC	/* Mailbox 31 Identifier High Register */
+
+/* CAN Mailbox Area Macros */
+#define	CAN_MB_ID1(x)		(CAN_MB00_ID1+((x)*0x20))
+#define	CAN_MB_ID0(x)		(CAN_MB00_ID0+((x)*0x20))
+#define	CAN_MB_TIMESTAMP(x)	(CAN_MB00_TIMESTAMP+((x)*0x20))
+#define	CAN_MB_LENGTH(x)	(CAN_MB00_LENGTH+((x)*0x20))
+#define	CAN_MB_DATA3(x)		(CAN_MB00_DATA3+((x)*0x20))
+#define	CAN_MB_DATA2(x)		(CAN_MB00_DATA2+((x)*0x20))
+#define	CAN_MB_DATA1(x)		(CAN_MB00_DATA1+((x)*0x20))
+#define	CAN_MB_DATA0(x)		(CAN_MB00_DATA0+((x)*0x20))
+
+
+/*********************************************************************************** */
+/* System MMR Register Bits and	Macros */
+/******************************************************************************* */
+
+/* SWRST Mask */
+#define	SYSTEM_RESET	0x0007	/* Initiates A System Software Reset */
+#define	DOUBLE_FAULT	0x0008	/* Core	Double Fault Causes Reset */
+#define	RESET_DOUBLE	0x2000	/* SW Reset Generated By Core Double-Fault */
+#define	RESET_WDOG		0x4000	/* SW Reset Generated By Watchdog Timer */
+#define	RESET_SOFTWARE	0x8000	/* SW Reset Occurred Since Last	Read Of	SWRST */
+
+/* SYSCR Masks													 */
+#define	BMODE			0x0006	/* Boot	Mode - Latched During HW Reset From Mode Pins */
+#define	NOBOOT			0x0010	/* Execute From	L1 or ASYNC Bank 0 When	BMODE =	0 */
+
+
+/* *************  SYSTEM INTERRUPT CONTROLLER MASKS ***************** */
+
+/* Peripheral Masks For	SIC0_ISR, SIC0_IWR, SIC0_IMASK */
+#define	PLL_WAKEUP_IRQ		0x00000001	/* PLL Wakeup Interrupt	Request */
+#define	DMAC0_ERR_IRQ		0x00000002	/* DMA Controller 0 Error Interrupt Request */
+#define	PPI_ERR_IRQ		0x00000004	/* PPI Error Interrupt Request */
+#define	SPORT0_ERR_IRQ		0x00000008	/* SPORT0 Error	Interrupt Request */
+#define	SPORT1_ERR_IRQ		0x00000010	/* SPORT1 Error	Interrupt Request */
+#define	SPI0_ERR_IRQ		0x00000020	/* SPI0	Error Interrupt	Request */
+#define	UART0_ERR_IRQ		0x00000040	/* UART0 Error Interrupt Request */
+#define	RTC_IRQ			0x00000080	/* Real-Time Clock Interrupt Request */
+#define	DMA0_IRQ		0x00000100	/* DMA Channel 0 (PPI) Interrupt Request */
+#define	DMA1_IRQ		0x00000200	/* DMA Channel 1 (SPORT0 RX) Interrupt Request */
+#define	DMA2_IRQ		0x00000400	/* DMA Channel 2 (SPORT0 TX) Interrupt Request */
+#define	DMA3_IRQ		0x00000800	/* DMA Channel 3 (SPORT1 RX) Interrupt Request */
+#define	DMA4_IRQ		0x00001000	/* DMA Channel 4 (SPORT1 TX) Interrupt Request */
+#define	DMA5_IRQ		0x00002000	/* DMA Channel 5 (SPI) Interrupt Request */
+#define	DMA6_IRQ		0x00004000	/* DMA Channel 6 (UART RX) Interrupt Request */
+#define	DMA7_IRQ		0x00008000	/* DMA Channel 7 (UART TX) Interrupt Request */
+#define	TIMER0_IRQ		0x00010000	/* Timer 0 Interrupt Request */
+#define	TIMER1_IRQ		0x00020000	/* Timer 1 Interrupt Request */
+#define	TIMER2_IRQ		0x00040000	/* Timer 2 Interrupt Request */
+#define	PFA_IRQ			0x00080000	/* Programmable	Flag Interrupt Request A */
+#define	PFB_IRQ			0x00100000	/* Programmable	Flag Interrupt Request B */
+#define	MDMA0_0_IRQ		0x00200000	/* MemDMA0 Stream 0 Interrupt Request */
+#define	MDMA0_1_IRQ		0x00400000	/* MemDMA0 Stream 1 Interrupt Request */
+#define	WDOG_IRQ		0x00800000	/* Software Watchdog Timer Interrupt Request */
+#define	DMAC1_ERR_IRQ		0x01000000	/* DMA Controller 1 Error Interrupt Request */
+#define	SPORT2_ERR_IRQ		0x02000000	/* SPORT2 Error	Interrupt Request */
+#define	SPORT3_ERR_IRQ		0x04000000	/* SPORT3 Error	Interrupt Request */
+#define	MXVR_SD_IRQ		0x08000000	/* MXVR	Synchronous Data Interrupt Request */
+#define	SPI1_ERR_IRQ		0x10000000	/* SPI1	Error Interrupt	Request */
+#define	SPI2_ERR_IRQ		0x20000000	/* SPI2	Error Interrupt	Request */
+#define	UART1_ERR_IRQ		0x40000000	/* UART1 Error Interrupt Request */
+#define	UART2_ERR_IRQ		0x80000000	/* UART2 Error Interrupt Request */
+
+/* the following are for backwards compatibility */
+#define	DMA0_ERR_IRQ		DMAC0_ERR_IRQ
+#define	DMA1_ERR_IRQ		DMAC1_ERR_IRQ
+
+
+/* Peripheral Masks For	SIC_ISR1, SIC_IWR1, SIC_IMASK1	 */
+#define	CAN_ERR_IRQ			0x00000001	/* CAN Error Interrupt Request */
+#define	DMA8_IRQ			0x00000002	/* DMA Channel 8 (SPORT2 RX) Interrupt Request */
+#define	DMA9_IRQ			0x00000004	/* DMA Channel 9 (SPORT2 TX) Interrupt Request */
+#define	DMA10_IRQ			0x00000008	/* DMA Channel 10 (SPORT3 RX) Interrupt	Request */
+#define	DMA11_IRQ			0x00000010	/* DMA Channel 11 (SPORT3 TX) Interrupt	Request */
+#define	DMA12_IRQ			0x00000020	/* DMA Channel 12 Interrupt Request */
+#define	DMA13_IRQ			0x00000040	/* DMA Channel 13 Interrupt Request */
+#define	DMA14_IRQ			0x00000080	/* DMA Channel 14 (SPI1) Interrupt Request */
+#define	DMA15_IRQ			0x00000100	/* DMA Channel 15 (SPI2) Interrupt Request */
+#define	DMA16_IRQ			0x00000200	/* DMA Channel 16 (UART1 RX) Interrupt Request */
+#define	DMA17_IRQ			0x00000400	/* DMA Channel 17 (UART1 TX) Interrupt Request */
+#define	DMA18_IRQ			0x00000800	/* DMA Channel 18 (UART2 RX) Interrupt Request */
+#define	DMA19_IRQ			0x00001000	/* DMA Channel 19 (UART2 TX) Interrupt Request */
+#define	TWI0_IRQ			0x00002000	/* TWI0	Interrupt Request */
+#define	TWI1_IRQ			0x00004000	/* TWI1	Interrupt Request */
+#define	CAN_RX_IRQ			0x00008000	/* CAN Receive Interrupt Request */
+#define	CAN_TX_IRQ			0x00010000	/* CAN Transmit	Interrupt Request */
+#define	MDMA1_0_IRQ			0x00020000	/* MemDMA1 Stream 0 Interrupt Request */
+#define	MDMA1_1_IRQ			0x00040000	/* MemDMA1 Stream 1 Interrupt Request */
+#define	MXVR_STAT_IRQ			0x00080000	/* MXVR	Status Interrupt Request */
+#define	MXVR_CM_IRQ			0x00100000	/* MXVR	Control	Message	Interrupt Request */
+#define	MXVR_AP_IRQ			0x00200000	/* MXVR	Asynchronous Packet Interrupt */
+
+/* the following are for backwards compatibility */
+#define	MDMA0_IRQ		MDMA1_0_IRQ
+#define	MDMA1_IRQ		MDMA1_1_IRQ
+
+#ifdef _MISRA_RULES
+#define	_MF15 0xFu
+#define	_MF7 7u
+#else
+#define	_MF15 0xF
+#define	_MF7 7
+#endif /* _MISRA_RULES */
+
+/* SIC_IMASKx Masks											 */
+#define	SIC_UNMASK_ALL	0x00000000					/* Unmask all peripheral interrupts */
+#define	SIC_MASK_ALL	0xFFFFFFFF					/* Mask	all peripheral interrupts */
+#ifdef _MISRA_RULES
+#define	SIC_MASK(x)		(1 << ((x)&0x1Fu))					/* Mask	Peripheral #x interrupt */
+#define	SIC_UNMASK(x)	(0xFFFFFFFFu ^ (1 << ((x)&0x1Fu)))	/* Unmask Peripheral #x	interrupt */
+#else
+#define	SIC_MASK(x)		(1 << ((x)&0x1F))					/* Mask	Peripheral #x interrupt */
+#define	SIC_UNMASK(x)	(0xFFFFFFFF ^ (1 << ((x)&0x1F)))	/* Unmask Peripheral #x	interrupt */
+#endif /* _MISRA_RULES */
+
+/* SIC_IWRx Masks											 */
+#define	IWR_DISABLE_ALL	0x00000000					/* Wakeup Disable all peripherals */
+#define	IWR_ENABLE_ALL	0xFFFFFFFF					/* Wakeup Enable all peripherals */
+#ifdef _MISRA_RULES
+#define	IWR_ENABLE(x)	(1 << ((x)&0x1Fu))					/* Wakeup Enable Peripheral #x */
+#define	IWR_DISABLE(x)	(0xFFFFFFFFu ^ (1 << ((x)&0x1Fu)))	/* Wakeup Disable Peripheral #x */
+#else
+#define	IWR_ENABLE(x)	(1 << ((x)&0x1F))					/* Wakeup Enable Peripheral #x */
+#define	IWR_DISABLE(x)	(0xFFFFFFFF ^ (1 << ((x)&0x1F)))	/* Wakeup Disable Peripheral #x */
+#endif /* _MISRA_RULES */
+
+/*  *********  PARALLEL	PERIPHERAL INTERFACE (PPI) MASKS ****************   */
+/*  PPI_CONTROL	Masks	      */
+#define	PORT_EN		0x0001	/* PPI Port Enable  */
+#define	PORT_DIR	0x0002	/* PPI Port Direction	    */
+#define	XFR_TYPE	0x000C	/* PPI Transfer	Type  */
+#define	PORT_CFG	0x0030	/* PPI Port Configuration */
+#define	FLD_SEL		0x0040	/* PPI Active Field Select */
+#define	PACK_EN		0x0080	/* PPI Packing Mode */
+/* previous versions of	defBF539.h erroneously included	DMA32 (PPI 32-bit DMA Enable) */
+#define	SKIP_EN		0x0200	/* PPI Skip Element Enable */
+#define	SKIP_EO		0x0400	/* PPI Skip Even/Odd Elements */
+#define	DLENGTH		0x3800	/* PPI Data Length  */
+#define	DLEN_8		0x0	     /*	PPI Data Length	mask for DLEN=8 */
+#define	DLEN_10		0x0800		/* Data	Length = 10 Bits */
+#define	DLEN_11		0x1000		/* Data	Length = 11 Bits */
+#define	DLEN_12		0x1800		/* Data	Length = 12 Bits */
+#define	DLEN_13		0x2000		/* Data	Length = 13 Bits */
+#define	DLEN_14		0x2800		/* Data	Length = 14 Bits */
+#define	DLEN_15		0x3000		/* Data	Length = 15 Bits */
+#define	DLEN_16		0x3800		/* Data	Length = 16 Bits */
+#ifdef _MISRA_RULES
+#define	DLEN(x)		((((x)-9u) & 0x07u) << 11)  /* PPI Data	Length (only works for x=10-->x=16) */
+#else
+#define	DLEN(x)		((((x)-9) & 0x07) << 11)  /* PPI Data Length (only works for x=10-->x=16) */
+#endif /* _MISRA_RULES */
+#define	POL			0xC000	/* PPI Signal Polarities       */
+#define	POLC		0x4000		/* PPI Clock Polarity */
+#define	POLS		0x8000		/* PPI Frame Sync Polarity */
+
+
+/* PPI_STATUS Masks					     */
+#define	FLD			0x0400	/* Field Indicator   */
+#define	FT_ERR		0x0800	/* Frame Track Error */
+#define	OVR			0x1000	/* FIFO	Overflow Error */
+#define	UNDR		0x2000	/* FIFO	Underrun Error */
+#define	ERR_DET		0x4000	/* Error Detected Indicator */
+#define	ERR_NCOR	0x8000	/* Error Not Corrected Indicator */
+
+
+/* **********  DMA CONTROLLER MASKS  ***********************/
+
+/* DMAx_PERIPHERAL_MAP,	MDMA_yy_PERIPHERAL_MAP Masks */
+
+#define	CTYPE			0x0040	/* DMA Channel Type Indicator */
+#define	CTYPE_P			0x6		/* DMA Channel Type Indicator BIT POSITION */
+#define	PCAP8			0x0080	/* DMA 8-bit Operation Indicator   */
+#define	PCAP16			0x0100	/* DMA 16-bit Operation	Indicator */
+#define	PCAP32			0x0200	/* DMA 32-bit Operation	Indicator */
+#define	PCAPWR			0x0400	/* DMA Write Operation Indicator */
+#define	PCAPRD			0x0800	/* DMA Read Operation Indicator */
+#define	PMAP			0xF000	/* DMA Peripheral Map Field */
+
+/* PMAP	Encodings For DMA Controller 0 */
+#define	PMAP_PPI		0x0000	/* PMAP	PPI Port DMA */
+#define	PMAP_SPORT0RX	0x1000	/* PMAP	SPORT0 Receive DMA */
+#define	PMAP_SPORT0TX	0x2000	/* PMAP	SPORT0 Transmit	DMA */
+#define	PMAP_SPORT1RX	0x3000	/* PMAP	SPORT1 Receive DMA */
+#define	PMAP_SPORT1TX	0x4000	/* PMAP	SPORT1 Transmit	DMA */
+#define	PMAP_SPI0		0x5000	/* PMAP	SPI DMA */
+#define	PMAP_UART0RX		0x6000	/* PMAP	UART Receive DMA */
+#define	PMAP_UART0TX		0x7000	/* PMAP	UART Transmit DMA */
+
+/* PMAP	Encodings For DMA Controller 1 */
+#define	PMAP_SPORT2RX	    0x0000  /* PMAP SPORT2 Receive DMA */
+#define	PMAP_SPORT2TX	    0x1000  /* PMAP SPORT2 Transmit DMA */
+#define	PMAP_SPORT3RX	    0x2000  /* PMAP SPORT3 Receive DMA */
+#define	PMAP_SPORT3TX	    0x3000  /* PMAP SPORT3 Transmit DMA */
+#define	PMAP_SPI1	    0x6000  /* PMAP SPI1 DMA */
+#define	PMAP_SPI2	    0x7000  /* PMAP SPI2 DMA */
+#define	PMAP_UART1RX	    0x8000  /* PMAP UART1 Receive DMA */
+#define	PMAP_UART1TX	    0x9000  /* PMAP UART1 Transmit DMA */
+#define	PMAP_UART2RX	    0xA000  /* PMAP UART2 Receive DMA */
+#define	PMAP_UART2TX	    0xB000  /* PMAP UART2 Transmit DMA */
+
+
+/*  *************  GENERAL PURPOSE TIMER MASKS	******************** */
+/* PWM Timer bit definitions */
+/* TIMER_ENABLE	Register */
+#define	TIMEN0			0x0001	/* Enable Timer	0 */
+#define	TIMEN1			0x0002	/* Enable Timer	1 */
+#define	TIMEN2			0x0004	/* Enable Timer	2 */
+
+#define	TIMEN0_P		0x00
+#define	TIMEN1_P		0x01
+#define	TIMEN2_P		0x02
+
+/* TIMER_DISABLE Register */
+#define	TIMDIS0			0x0001	/* Disable Timer 0 */
+#define	TIMDIS1			0x0002	/* Disable Timer 1 */
+#define	TIMDIS2			0x0004	/* Disable Timer 2 */
+
+#define	TIMDIS0_P		0x00
+#define	TIMDIS1_P		0x01
+#define	TIMDIS2_P		0x02
+
+/* TIMER_STATUS	Register */
+#define	TIMIL0			0x0001	/* Timer 0 Interrupt */
+#define	TIMIL1			0x0002	/* Timer 1 Interrupt */
+#define	TIMIL2			0x0004	/* Timer 2 Interrupt */
+#define	TOVF_ERR0		0x0010	/* Timer 0 Counter Overflow */
+#define	TOVF_ERR1		0x0020	/* Timer 1 Counter Overflow */
+#define	TOVF_ERR2		0x0040	/* Timer 2 Counter Overflow */
+#define	TRUN0			0x1000	/* Timer 0 Slave Enable	Status */
+#define	TRUN1			0x2000	/* Timer 1 Slave Enable	Status */
+#define	TRUN2			0x4000	/* Timer 2 Slave Enable	Status */
+
+#define	TIMIL0_P		0x00
+#define	TIMIL1_P		0x01
+#define	TIMIL2_P		0x02
+#define	TOVF_ERR0_P		0x04
+#define	TOVF_ERR1_P		0x05
+#define	TOVF_ERR2_P		0x06
+#define	TRUN0_P			0x0C
+#define	TRUN1_P			0x0D
+#define	TRUN2_P			0x0E
+
+/* Alternate Deprecated	Macros Provided	For Backwards Code Compatibility */
+#define	TOVL_ERR0		TOVF_ERR0
+#define	TOVL_ERR1		TOVF_ERR1
+#define	TOVL_ERR2		TOVF_ERR2
+#define	TOVL_ERR0_P		TOVF_ERR0_P
+#define	TOVL_ERR1_P	TOVF_ERR1_P
+#define	TOVL_ERR2_P	TOVF_ERR2_P
+
+/* TIMERx_CONFIG Registers */
+#define	PWM_OUT			0x0001
+#define	WDTH_CAP		0x0002
+#define	EXT_CLK			0x0003
+#define	PULSE_HI		0x0004
+#define	PERIOD_CNT		0x0008
+#define	IRQ_ENA			0x0010
+#define	TIN_SEL			0x0020
+#define	OUT_DIS			0x0040
+#define	CLK_SEL			0x0080
+#define	TOGGLE_HI		0x0100
+#define	EMU_RUN			0x0200
+#ifdef _MISRA_RULES
+#define	ERR_TYP(x)		(((x) &	0x03u) << 14)
+#else
+#define	ERR_TYP(x)		(((x) &	0x03) << 14)
+#endif /* _MISRA_RULES */
+
+#define	TMODE_P0		0x00
+#define	TMODE_P1		0x01
+#define	PULSE_HI_P		0x02
+#define	PERIOD_CNT_P	0x03
+#define	IRQ_ENA_P		0x04
+#define	TIN_SEL_P		0x05
+#define	OUT_DIS_P		0x06
+#define	CLK_SEL_P		0x07
+#define	TOGGLE_HI_P		0x08
+#define	EMU_RUN_P		0x09
+#define	ERR_TYP_P0		0x0E
+#define	ERR_TYP_P1		0x0F
+
+/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS	************* */
+/* EBIU_AMGCTL Masks */
+#define	AMCKEN		0x0001	/* Enable CLKOUT */
+#define	AMBEN_NONE	0x0000	/* All Banks Disabled */
+#define	AMBEN_B0	0x0002	/* Enable Asynchronous Memory Bank 0 only */
+#define	AMBEN_B0_B1	0x0004	/* Enable Asynchronous Memory Banks 0 &	1 only */
+#define	AMBEN_B0_B1_B2	0x0006	/* Enable Asynchronous Memory Banks 0, 1, and 2 */
+#define	AMBEN_ALL	0x0008	/* Enable Asynchronous Memory Banks (all) 0, 1,	2, and 3 */
+#define	CDPRIO		0x0100	/* DMA has priority over core for external accesses */
+
+/* EBIU_AMGCTL Bit Positions */
+#define	AMCKEN_P		0x0000	/* Enable CLKOUT */
+#define	AMBEN_P0		0x0001	/* Asynchronous	Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
+#define	AMBEN_P1		0x0002	/* Asynchronous	Memory Enable, 010 - banks 0&1 enabled,	 011 - banks 0-3 enabled */
+#define	AMBEN_P2		0x0003	/* Asynchronous	Memory Enable, 1xx - All banks (bank 0,	1, 2, and 3) enabled */
+
+/* EBIU_AMBCTL0	Masks */
+#define	B0RDYEN			0x00000001  /* Bank 0 RDY Enable, 0=disable, 1=enable */
+#define	B0RDYPOL		0x00000002  /* Bank 0 RDY Active high, 0=active	low, 1=active high */
+#define	B0TT_1			0x00000004  /* Bank 0 Transition Time from Read	to Write = 1 cycle */
+#define	B0TT_2			0x00000008  /* Bank 0 Transition Time from Read	to Write = 2 cycles */
+#define	B0TT_3			0x0000000C  /* Bank 0 Transition Time from Read	to Write = 3 cycles */
+#define	B0TT_4			0x00000000  /* Bank 0 Transition Time from Read	to Write = 4 cycles */
+#define	B0ST_1			0x00000010  /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
+#define	B0ST_2			0x00000020  /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
+#define	B0ST_3			0x00000030  /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
+#define	B0ST_4			0x00000000  /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
+#define	B0HT_1			0x00000040  /* Bank 0 Hold Time	from Read/Write	deasserted to AOE deasserted = 1 cycle */
+#define	B0HT_2			0x00000080  /* Bank 0 Hold Time	from Read/Write	deasserted to AOE deasserted = 2 cycles */
+#define	B0HT_3			0x000000C0  /* Bank 0 Hold Time	from Read/Write	deasserted to AOE deasserted = 3 cycles */
+#define	B0HT_0			0x00000000  /* Bank 0 Hold Time	from Read/Write	deasserted to AOE deasserted = 0 cycles */
+#define	B0RAT_1			0x00000100  /* Bank 0 Read Access Time = 1 cycle */
+#define	B0RAT_2			0x00000200  /* Bank 0 Read Access Time = 2 cycles */
+#define	B0RAT_3			0x00000300  /* Bank 0 Read Access Time = 3 cycles */
+#define	B0RAT_4			0x00000400  /* Bank 0 Read Access Time = 4 cycles */
+#define	B0RAT_5			0x00000500  /* Bank 0 Read Access Time = 5 cycles */
+#define	B0RAT_6			0x00000600  /* Bank 0 Read Access Time = 6 cycles */
+#define	B0RAT_7			0x00000700  /* Bank 0 Read Access Time = 7 cycles */
+#define	B0RAT_8			0x00000800  /* Bank 0 Read Access Time = 8 cycles */
+#define	B0RAT_9			0x00000900  /* Bank 0 Read Access Time = 9 cycles */
+#define	B0RAT_10		0x00000A00  /* Bank 0 Read Access Time = 10 cycles */
+#define	B0RAT_11		0x00000B00  /* Bank 0 Read Access Time = 11 cycles */
+#define	B0RAT_12		0x00000C00  /* Bank 0 Read Access Time = 12 cycles */
+#define	B0RAT_13		0x00000D00  /* Bank 0 Read Access Time = 13 cycles */
+#define	B0RAT_14		0x00000E00  /* Bank 0 Read Access Time = 14 cycles */
+#define	B0RAT_15		0x00000F00  /* Bank 0 Read Access Time = 15 cycles */
+#define	B0WAT_1			0x00001000  /* Bank 0 Write Access Time	= 1 cycle */
+#define	B0WAT_2			0x00002000  /* Bank 0 Write Access Time	= 2 cycles */
+#define	B0WAT_3			0x00003000  /* Bank 0 Write Access Time	= 3 cycles */
+#define	B0WAT_4			0x00004000  /* Bank 0 Write Access Time	= 4 cycles */
+#define	B0WAT_5			0x00005000  /* Bank 0 Write Access Time	= 5 cycles */
+#define	B0WAT_6			0x00006000  /* Bank 0 Write Access Time	= 6 cycles */
+#define	B0WAT_7			0x00007000  /* Bank 0 Write Access Time	= 7 cycles */
+#define	B0WAT_8			0x00008000  /* Bank 0 Write Access Time	= 8 cycles */
+#define	B0WAT_9			0x00009000  /* Bank 0 Write Access Time	= 9 cycles */
+#define	B0WAT_10		0x0000A000  /* Bank 0 Write Access Time	= 10 cycles */
+#define	B0WAT_11		0x0000B000  /* Bank 0 Write Access Time	= 11 cycles */
+#define	B0WAT_12		0x0000C000  /* Bank 0 Write Access Time	= 12 cycles */
+#define	B0WAT_13		0x0000D000  /* Bank 0 Write Access Time	= 13 cycles */
+#define	B0WAT_14		0x0000E000  /* Bank 0 Write Access Time	= 14 cycles */
+#define	B0WAT_15		0x0000F000  /* Bank 0 Write Access Time	= 15 cycles */
+#define	B1RDYEN			0x00010000  /* Bank 1 RDY enable, 0=disable, 1=enable */
+#define	B1RDYPOL		0x00020000  /* Bank 1 RDY Active high, 0=active	low, 1=active high */
+#define	B1TT_1			0x00040000  /* Bank 1 Transition Time from Read	to Write = 1 cycle */
+#define	B1TT_2			0x00080000  /* Bank 1 Transition Time from Read	to Write = 2 cycles */
+#define	B1TT_3			0x000C0000  /* Bank 1 Transition Time from Read	to Write = 3 cycles */
+#define	B1TT_4			0x00000000  /* Bank 1 Transition Time from Read	to Write = 4 cycles */
+#define	B1ST_1			0x00100000  /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define	B1ST_2			0x00200000  /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define	B1ST_3			0x00300000  /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define	B1ST_4			0x00000000  /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define	B1HT_1			0x00400000  /* Bank 1 Hold Time	from Read or Write deasserted to AOE deasserted	= 1 cycle */
+#define	B1HT_2			0x00800000  /* Bank 1 Hold Time	from Read or Write deasserted to AOE deasserted	= 2 cycles */
+#define	B1HT_3			0x00C00000  /* Bank 1 Hold Time	from Read or Write deasserted to AOE deasserted	= 3 cycles */
+#define	B1HT_0			0x00000000  /* Bank 1 Hold Time	from Read or Write deasserted to AOE deasserted	= 0 cycles */
+#define	B1RAT_1			0x01000000  /* Bank 1 Read Access Time = 1 cycle */
+#define	B1RAT_2			0x02000000  /* Bank 1 Read Access Time = 2 cycles */
+#define	B1RAT_3			0x03000000  /* Bank 1 Read Access Time = 3 cycles */
+#define	B1RAT_4			0x04000000  /* Bank 1 Read Access Time = 4 cycles */
+#define	B1RAT_5			0x05000000  /* Bank 1 Read Access Time = 5 cycles */
+#define	B1RAT_6			0x06000000  /* Bank 1 Read Access Time = 6 cycles */
+#define	B1RAT_7			0x07000000  /* Bank 1 Read Access Time = 7 cycles */
+#define	B1RAT_8			0x08000000  /* Bank 1 Read Access Time = 8 cycles */
+#define	B1RAT_9			0x09000000  /* Bank 1 Read Access Time = 9 cycles */
+#define	B1RAT_10		0x0A000000  /* Bank 1 Read Access Time = 10 cycles */
+#define	B1RAT_11		0x0B000000  /* Bank 1 Read Access Time = 11 cycles */
+#define	B1RAT_12		0x0C000000  /* Bank 1 Read Access Time = 12 cycles */
+#define	B1RAT_13		0x0D000000  /* Bank 1 Read Access Time = 13 cycles */
+#define	B1RAT_14		0x0E000000  /* Bank 1 Read Access Time = 14 cycles */
+#define	B1RAT_15		0x0F000000  /* Bank 1 Read Access Time = 15 cycles */
+#define	B1WAT_1			0x10000000 /* Bank 1 Write Access Time = 1 cycle */
+#define	B1WAT_2			0x20000000  /* Bank 1 Write Access Time	= 2 cycles */
+#define	B1WAT_3			0x30000000  /* Bank 1 Write Access Time	= 3 cycles */
+#define	B1WAT_4			0x40000000  /* Bank 1 Write Access Time	= 4 cycles */
+#define	B1WAT_5			0x50000000  /* Bank 1 Write Access Time	= 5 cycles */
+#define	B1WAT_6			0x60000000  /* Bank 1 Write Access Time	= 6 cycles */
+#define	B1WAT_7			0x70000000  /* Bank 1 Write Access Time	= 7 cycles */
+#define	B1WAT_8			0x80000000  /* Bank 1 Write Access Time	= 8 cycles */
+#define	B1WAT_9			0x90000000  /* Bank 1 Write Access Time	= 9 cycles */
+#define	B1WAT_10		0xA0000000  /* Bank 1 Write Access Time	= 10 cycles */
+#define	B1WAT_11		0xB0000000  /* Bank 1 Write Access Time	= 11 cycles */
+#define	B1WAT_12		0xC0000000  /* Bank 1 Write Access Time	= 12 cycles */
+#define	B1WAT_13		0xD0000000  /* Bank 1 Write Access Time	= 13 cycles */
+#define	B1WAT_14		0xE0000000  /* Bank 1 Write Access Time	= 14 cycles */
+#define	B1WAT_15		0xF0000000  /* Bank 1 Write Access Time	= 15 cycles */
+
+/* EBIU_AMBCTL1	Masks */
+#define	B2RDYEN			0x00000001  /* Bank 2 RDY Enable, 0=disable, 1=enable */
+#define	B2RDYPOL		0x00000002  /* Bank 2 RDY Active high, 0=active	low, 1=active high */
+#define	B2TT_1			0x00000004  /* Bank 2 Transition Time from Read	to Write = 1 cycle */
+#define	B2TT_2			0x00000008  /* Bank 2 Transition Time from Read	to Write = 2 cycles */
+#define	B2TT_3			0x0000000C  /* Bank 2 Transition Time from Read	to Write = 3 cycles */
+#define	B2TT_4			0x00000000  /* Bank 2 Transition Time from Read	to Write = 4 cycles */
+#define	B2ST_1			0x00000010  /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define	B2ST_2			0x00000020  /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define	B2ST_3			0x00000030  /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define	B2ST_4			0x00000000  /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define	B2HT_1			0x00000040  /* Bank 2 Hold Time	from Read or Write deasserted to AOE deasserted	= 1 cycle */
+#define	B2HT_2			0x00000080  /* Bank 2 Hold Time	from Read or Write deasserted to AOE deasserted	= 2 cycles */
+#define	B2HT_3			0x000000C0  /* Bank 2 Hold Time	from Read or Write deasserted to AOE deasserted	= 3 cycles */
+#define	B2HT_0			0x00000000  /* Bank 2 Hold Time	from Read or Write deasserted to AOE deasserted	= 0 cycles */
+#define	B2RAT_1			0x00000100  /* Bank 2 Read Access Time = 1 cycle */
+#define	B2RAT_2			0x00000200  /* Bank 2 Read Access Time = 2 cycles */
+#define	B2RAT_3			0x00000300  /* Bank 2 Read Access Time = 3 cycles */
+#define	B2RAT_4			0x00000400  /* Bank 2 Read Access Time = 4 cycles */
+#define	B2RAT_5			0x00000500  /* Bank 2 Read Access Time = 5 cycles */
+#define	B2RAT_6			0x00000600  /* Bank 2 Read Access Time = 6 cycles */
+#define	B2RAT_7			0x00000700  /* Bank 2 Read Access Time = 7 cycles */
+#define	B2RAT_8			0x00000800  /* Bank 2 Read Access Time = 8 cycles */
+#define	B2RAT_9			0x00000900  /* Bank 2 Read Access Time = 9 cycles */
+#define	B2RAT_10		0x00000A00  /* Bank 2 Read Access Time = 10 cycles */
+#define	B2RAT_11		0x00000B00  /* Bank 2 Read Access Time = 11 cycles */
+#define	B2RAT_12		0x00000C00  /* Bank 2 Read Access Time = 12 cycles */
+#define	B2RAT_13		0x00000D00  /* Bank 2 Read Access Time = 13 cycles */
+#define	B2RAT_14		0x00000E00  /* Bank 2 Read Access Time = 14 cycles */
+#define	B2RAT_15		0x00000F00  /* Bank 2 Read Access Time = 15 cycles */
+#define	B2WAT_1			0x00001000  /* Bank 2 Write Access Time	= 1 cycle */
+#define	B2WAT_2			0x00002000  /* Bank 2 Write Access Time	= 2 cycles */
+#define	B2WAT_3			0x00003000  /* Bank 2 Write Access Time	= 3 cycles */
+#define	B2WAT_4			0x00004000  /* Bank 2 Write Access Time	= 4 cycles */
+#define	B2WAT_5			0x00005000  /* Bank 2 Write Access Time	= 5 cycles */
+#define	B2WAT_6			0x00006000  /* Bank 2 Write Access Time	= 6 cycles */
+#define	B2WAT_7			0x00007000  /* Bank 2 Write Access Time	= 7 cycles */
+#define	B2WAT_8			0x00008000  /* Bank 2 Write Access Time	= 8 cycles */
+#define	B2WAT_9			0x00009000  /* Bank 2 Write Access Time	= 9 cycles */
+#define	B2WAT_10		0x0000A000  /* Bank 2 Write Access Time	= 10 cycles */
+#define	B2WAT_11		0x0000B000  /* Bank 2 Write Access Time	= 11 cycles */
+#define	B2WAT_12		0x0000C000  /* Bank 2 Write Access Time	= 12 cycles */
+#define	B2WAT_13		0x0000D000  /* Bank 2 Write Access Time	= 13 cycles */
+#define	B2WAT_14		0x0000E000  /* Bank 2 Write Access Time	= 14 cycles */
+#define	B2WAT_15		0x0000F000  /* Bank 2 Write Access Time	= 15 cycles */
+#define	B3RDYEN			0x00010000  /* Bank 3 RDY enable, 0=disable, 1=enable */
+#define	B3RDYPOL		0x00020000  /* Bank 3 RDY Active high, 0=active	low, 1=active high */
+#define	B3TT_1			0x00040000  /* Bank 3 Transition Time from Read	to Write = 1 cycle */
+#define	B3TT_2			0x00080000  /* Bank 3 Transition Time from Read	to Write = 2 cycles */
+#define	B3TT_3			0x000C0000  /* Bank 3 Transition Time from Read	to Write = 3 cycles */
+#define	B3TT_4			0x00000000  /* Bank 3 Transition Time from Read	to Write = 4 cycles */
+#define	B3ST_1			0x00100000  /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define	B3ST_2			0x00200000  /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define	B3ST_3			0x00300000  /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define	B3ST_4			0x00000000  /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define	B3HT_1			0x00400000  /* Bank 3 Hold Time	from Read or Write deasserted to AOE deasserted	= 1 cycle */
+#define	B3HT_2			0x00800000  /* Bank 3 Hold Time	from Read or Write deasserted to AOE deasserted	= 2 cycles */
+#define	B3HT_3			0x00C00000  /* Bank 3 Hold Time	from Read or Write deasserted to AOE deasserted	= 3 cycles */
+#define	B3HT_0			0x00000000  /* Bank 3 Hold Time	from Read or Write deasserted to AOE deasserted	= 0 cycles */
+#define	B3RAT_1			0x01000000 /* Bank 3 Read Access Time =	1 cycle */
+#define	B3RAT_2			0x02000000  /* Bank 3 Read Access Time = 2 cycles */
+#define	B3RAT_3			0x03000000  /* Bank 3 Read Access Time = 3 cycles */
+#define	B3RAT_4			0x04000000  /* Bank 3 Read Access Time = 4 cycles */
+#define	B3RAT_5			0x05000000  /* Bank 3 Read Access Time = 5 cycles */
+#define	B3RAT_6			0x06000000  /* Bank 3 Read Access Time = 6 cycles */
+#define	B3RAT_7			0x07000000  /* Bank 3 Read Access Time = 7 cycles */
+#define	B3RAT_8			0x08000000  /* Bank 3 Read Access Time = 8 cycles */
+#define	B3RAT_9			0x09000000  /* Bank 3 Read Access Time = 9 cycles */
+#define	B3RAT_10		0x0A000000  /* Bank 3 Read Access Time = 10 cycles */
+#define	B3RAT_11		0x0B000000  /* Bank 3 Read Access Time = 11 cycles */
+#define	B3RAT_12		0x0C000000  /* Bank 3 Read Access Time = 12 cycles */
+#define	B3RAT_13		0x0D000000  /* Bank 3 Read Access Time = 13 cycles */
+#define	B3RAT_14		0x0E000000  /* Bank 3 Read Access Time = 14 cycles */
+#define	B3RAT_15		0x0F000000  /* Bank 3 Read Access Time = 15 cycles */
+#define	B3WAT_1			0x10000000 /* Bank 3 Write Access Time = 1 cycle */
+#define	B3WAT_2			0x20000000  /* Bank 3 Write Access Time	= 2 cycles */
+#define	B3WAT_3			0x30000000  /* Bank 3 Write Access Time	= 3 cycles */
+#define	B3WAT_4			0x40000000  /* Bank 3 Write Access Time	= 4 cycles */
+#define	B3WAT_5			0x50000000  /* Bank 3 Write Access Time	= 5 cycles */
+#define	B3WAT_6			0x60000000  /* Bank 3 Write Access Time	= 6 cycles */
+#define	B3WAT_7			0x70000000  /* Bank 3 Write Access Time	= 7 cycles */
+#define	B3WAT_8			0x80000000  /* Bank 3 Write Access Time	= 8 cycles */
+#define	B3WAT_9			0x90000000  /* Bank 3 Write Access Time	= 9 cycles */
+#define	B3WAT_10		0xA0000000  /* Bank 3 Write Access Time	= 10 cycles */
+#define	B3WAT_11		0xB0000000  /* Bank 3 Write Access Time	= 11 cycles */
+#define	B3WAT_12		0xC0000000  /* Bank 3 Write Access Time	= 12 cycles */
+#define	B3WAT_13		0xD0000000  /* Bank 3 Write Access Time	= 13 cycles */
+#define	B3WAT_14		0xE0000000  /* Bank 3 Write Access Time	= 14 cycles */
+#define	B3WAT_15		0xF0000000  /* Bank 3 Write Access Time	= 15 cycles */
+
+/* **********************  SDRAM CONTROLLER MASKS  *************************** */
+/* EBIU_SDGCTL Masks */
+#define	SCTLE			0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */
+#define	CL_2			0x00000008 /* SDRAM CAS	latency	= 2 cycles */
+#define	CL_3			0x0000000C /* SDRAM CAS	latency	= 3 cycles */
+#define	PFE				0x00000010 /* Enable SDRAM prefetch */
+#define	PFP				0x00000020 /* Prefetch has priority over AMC requests */
+#define	PASR_ALL		0x00000000	/* All 4 SDRAM Banks Refreshed In Self-Refresh */
+#define	PASR_B0_B1		0x00000010	/* SDRAM Banks 0 and 1 Are Refreshed In	Self-Refresh */
+#define	PASR_B0			0x00000020	/* Only	SDRAM Bank 0 Is	Refreshed In Self-Refresh */
+#define	TRAS_1			0x00000040 /* SDRAM tRAS = 1 cycle */
+#define	TRAS_2			0x00000080 /* SDRAM tRAS = 2 cycles */
+#define	TRAS_3			0x000000C0 /* SDRAM tRAS = 3 cycles */
+#define	TRAS_4			0x00000100 /* SDRAM tRAS = 4 cycles */
+#define	TRAS_5			0x00000140 /* SDRAM tRAS = 5 cycles */
+#define	TRAS_6			0x00000180 /* SDRAM tRAS = 6 cycles */
+#define	TRAS_7			0x000001C0 /* SDRAM tRAS = 7 cycles */
+#define	TRAS_8			0x00000200 /* SDRAM tRAS = 8 cycles */
+#define	TRAS_9			0x00000240 /* SDRAM tRAS = 9 cycles */
+#define	TRAS_10			0x00000280 /* SDRAM tRAS = 10 cycles */
+#define	TRAS_11			0x000002C0 /* SDRAM tRAS = 11 cycles */
+#define	TRAS_12			0x00000300 /* SDRAM tRAS = 12 cycles */
+#define	TRAS_13			0x00000340 /* SDRAM tRAS = 13 cycles */
+#define	TRAS_14			0x00000380 /* SDRAM tRAS = 14 cycles */
+#define	TRAS_15			0x000003C0 /* SDRAM tRAS = 15 cycles */
+#define	TRP_1			0x00000800 /* SDRAM tRP	= 1 cycle */
+#define	TRP_2			0x00001000 /* SDRAM tRP	= 2 cycles */
+#define	TRP_3			0x00001800 /* SDRAM tRP	= 3 cycles */
+#define	TRP_4			0x00002000 /* SDRAM tRP	= 4 cycles */
+#define	TRP_5			0x00002800 /* SDRAM tRP	= 5 cycles */
+#define	TRP_6			0x00003000 /* SDRAM tRP	= 6 cycles */
+#define	TRP_7			0x00003800 /* SDRAM tRP	= 7 cycles */
+#define	TRCD_1			0x00008000 /* SDRAM tRCD = 1 cycle */
+#define	TRCD_2			0x00010000 /* SDRAM tRCD = 2 cycles */
+#define	TRCD_3			0x00018000 /* SDRAM tRCD = 3 cycles */
+#define	TRCD_4			0x00020000 /* SDRAM tRCD = 4 cycles */
+#define	TRCD_5			0x00028000 /* SDRAM tRCD = 5 cycles */
+#define	TRCD_6			0x00030000 /* SDRAM tRCD = 6 cycles */
+#define	TRCD_7			0x00038000 /* SDRAM tRCD = 7 cycles */
+#define	TWR_1			0x00080000 /* SDRAM tWR	= 1 cycle */
+#define	TWR_2			0x00100000 /* SDRAM tWR	= 2 cycles */
+#define	TWR_3			0x00180000 /* SDRAM tWR	= 3 cycles */
+#define	PUPSD			0x00200000 /*Power-up start delay */
+#define	PSM				0x00400000 /* SDRAM power-up sequence =	Precharge, mode	register set, 8	CBR refresh cycles */
+#define	PSS				0x00800000 /* enable SDRAM power-up sequence on	next SDRAM access */
+#define	SRFS			0x01000000 /* Start SDRAM self-refresh mode */
+#define	EBUFE			0x02000000 /* Enable external buffering	timing */
+#define	FBBRW			0x04000000 /* Fast back-to-back	read write enable */
+#define	EMREN			0x10000000 /* Extended mode register enable */
+#define	TCSR			0x20000000 /* Temp compensated self refresh value 85 deg C */
+#define	CDDBG			0x40000000 /* Tristate SDRAM controls during bus grant */
+
+/* EBIU_SDBCTL Masks */
+#define	EBE				0x00000001 /* Enable SDRAM external bank */
+#define	EBSZ_16			0x00000000 /* SDRAM external bank size = 16MB */
+#define	EBSZ_32			0x00000002 /* SDRAM external bank size = 32MB */
+#define	EBSZ_64			0x00000004 /* SDRAM external bank size = 64MB */
+#define	EBSZ_128		0x00000006 /* SDRAM external bank size = 128MB */
+#define	EBSZ_256		0x00000008 /* SDRAM External Bank Size = 256MB */
+#define	EBSZ_512		0x0000000A /* SDRAM External Bank Size = 512MB */
+#define	EBCAW_8			0x00000000 /* SDRAM external bank column address width = 8 bits */
+#define	EBCAW_9			0x00000010 /* SDRAM external bank column address width = 9 bits */
+#define	EBCAW_10		0x00000020 /* SDRAM external bank column address width = 9 bits */
+#define	EBCAW_11		0x00000030 /* SDRAM external bank column address width = 9 bits */
+
+/* EBIU_SDSTAT Masks */
+#define	SDCI			0x00000001 /* SDRAM controller is idle */
+#define	SDSRA			0x00000002 /* SDRAM SDRAM self refresh is active */
+#define	SDPUA			0x00000004 /* SDRAM power up active  */
+#define	SDRS			0x00000008 /* SDRAM is in reset	state */
+#define	SDEASE			0x00000010 /* SDRAM EAB	sticky error status - W1C */
+#define	BGSTAT			0x00000020 /* Bus granted */
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/defBF539.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/defBF539.h
new file mode 100644
index 0000000..199e871
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright 2008-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF539_H
+#define _DEF_BF539_H
+
+#include "defBF538.h"
+
+/* Media Transceiver (MXVR)   (0xFFC02700 - 0xFFC028FF) */
+
+#define	MXVR_CONFIG	      0xFFC02700  /* MXVR Configuration	Register */
+#define	MXVR_PLL_CTL_0	      0xFFC02704  /* MXVR Phase	Lock Loop Control Register 0 */
+
+#define	MXVR_STATE_0	      0xFFC02708  /* MXVR State	Register 0 */
+#define	MXVR_STATE_1	      0xFFC0270C  /* MXVR State	Register 1 */
+
+#define	MXVR_INT_STAT_0	      0xFFC02710  /* MXVR Interrupt Status Register 0 */
+#define	MXVR_INT_STAT_1	      0xFFC02714  /* MXVR Interrupt Status Register 1 */
+
+#define	MXVR_INT_EN_0	      0xFFC02718  /* MXVR Interrupt Enable Register 0 */
+#define	MXVR_INT_EN_1	      0xFFC0271C  /* MXVR Interrupt Enable Register 1 */
+
+#define	MXVR_POSITION	      0xFFC02720  /* MXVR Node Position	Register */
+#define	MXVR_MAX_POSITION     0xFFC02724  /* MXVR Maximum Node Position	Register */
+
+#define	MXVR_DELAY	      0xFFC02728  /* MXVR Node Frame Delay Register */
+#define	MXVR_MAX_DELAY	      0xFFC0272C  /* MXVR Maximum Node Frame Delay Register */
+
+#define	MXVR_LADDR	      0xFFC02730  /* MXVR Logical Address Register */
+#define	MXVR_GADDR	      0xFFC02734  /* MXVR Group	Address	Register */
+#define	MXVR_AADDR	      0xFFC02738  /* MXVR Alternate Address Register */
+
+#define	MXVR_ALLOC_0	      0xFFC0273C  /* MXVR Allocation Table Register 0 */
+#define	MXVR_ALLOC_1	      0xFFC02740  /* MXVR Allocation Table Register 1 */
+#define	MXVR_ALLOC_2	      0xFFC02744  /* MXVR Allocation Table Register 2 */
+#define	MXVR_ALLOC_3	      0xFFC02748  /* MXVR Allocation Table Register 3 */
+#define	MXVR_ALLOC_4	      0xFFC0274C  /* MXVR Allocation Table Register 4 */
+#define	MXVR_ALLOC_5	      0xFFC02750  /* MXVR Allocation Table Register 5 */
+#define	MXVR_ALLOC_6	      0xFFC02754  /* MXVR Allocation Table Register 6 */
+#define	MXVR_ALLOC_7	      0xFFC02758  /* MXVR Allocation Table Register 7 */
+#define	MXVR_ALLOC_8	      0xFFC0275C  /* MXVR Allocation Table Register 8 */
+#define	MXVR_ALLOC_9	      0xFFC02760  /* MXVR Allocation Table Register 9 */
+#define	MXVR_ALLOC_10	      0xFFC02764  /* MXVR Allocation Table Register 10 */
+#define	MXVR_ALLOC_11	      0xFFC02768  /* MXVR Allocation Table Register 11 */
+#define	MXVR_ALLOC_12	      0xFFC0276C  /* MXVR Allocation Table Register 12 */
+#define	MXVR_ALLOC_13	      0xFFC02770  /* MXVR Allocation Table Register 13 */
+#define	MXVR_ALLOC_14	      0xFFC02774  /* MXVR Allocation Table Register 14 */
+
+#define	MXVR_SYNC_LCHAN_0     0xFFC02778  /* MXVR Sync Data Logical Channel Assign Register 0 */
+#define	MXVR_SYNC_LCHAN_1     0xFFC0277C  /* MXVR Sync Data Logical Channel Assign Register 1 */
+#define	MXVR_SYNC_LCHAN_2     0xFFC02780  /* MXVR Sync Data Logical Channel Assign Register 2 */
+#define	MXVR_SYNC_LCHAN_3     0xFFC02784  /* MXVR Sync Data Logical Channel Assign Register 3 */
+#define	MXVR_SYNC_LCHAN_4     0xFFC02788  /* MXVR Sync Data Logical Channel Assign Register 4 */
+#define	MXVR_SYNC_LCHAN_5     0xFFC0278C  /* MXVR Sync Data Logical Channel Assign Register 5 */
+#define	MXVR_SYNC_LCHAN_6     0xFFC02790  /* MXVR Sync Data Logical Channel Assign Register 6 */
+#define	MXVR_SYNC_LCHAN_7     0xFFC02794  /* MXVR Sync Data Logical Channel Assign Register 7 */
+
+#define	MXVR_DMA0_CONFIG      0xFFC02798  /* MXVR Sync Data DMA0 Config	Register */
+#define	MXVR_DMA0_START_ADDR  0xFFC0279C  /* MXVR Sync Data DMA0 Start Address Register */
+#define	MXVR_DMA0_COUNT	      0xFFC027A0  /* MXVR Sync Data DMA0 Loop Count Register */
+#define	MXVR_DMA0_CURR_ADDR   0xFFC027A4  /* MXVR Sync Data DMA0 Current Address Register */
+#define	MXVR_DMA0_CURR_COUNT  0xFFC027A8  /* MXVR Sync Data DMA0 Current Loop Count Register */
+
+#define	MXVR_DMA1_CONFIG      0xFFC027AC  /* MXVR Sync Data DMA1 Config	Register */
+#define	MXVR_DMA1_START_ADDR  0xFFC027B0  /* MXVR Sync Data DMA1 Start Address Register */
+#define	MXVR_DMA1_COUNT	      0xFFC027B4  /* MXVR Sync Data DMA1 Loop Count Register */
+#define	MXVR_DMA1_CURR_ADDR   0xFFC027B8  /* MXVR Sync Data DMA1 Current Address Register */
+#define	MXVR_DMA1_CURR_COUNT  0xFFC027BC  /* MXVR Sync Data DMA1 Current Loop Count Register */
+
+#define	MXVR_DMA2_CONFIG      0xFFC027C0  /* MXVR Sync Data DMA2 Config	Register */
+#define	MXVR_DMA2_START_ADDR  0xFFC027C4  /* MXVR Sync Data DMA2 Start Address Register */
+#define	MXVR_DMA2_COUNT	      0xFFC027C8  /* MXVR Sync Data DMA2 Loop Count Register */
+#define	MXVR_DMA2_CURR_ADDR   0xFFC027CC  /* MXVR Sync Data DMA2 Current Address Register */
+#define	MXVR_DMA2_CURR_COUNT  0xFFC027D0  /* MXVR Sync Data DMA2 Current Loop Count Register */
+
+#define	MXVR_DMA3_CONFIG      0xFFC027D4  /* MXVR Sync Data DMA3 Config	Register */
+#define	MXVR_DMA3_START_ADDR  0xFFC027D8  /* MXVR Sync Data DMA3 Start Address Register */
+#define	MXVR_DMA3_COUNT	      0xFFC027DC  /* MXVR Sync Data DMA3 Loop Count Register */
+#define	MXVR_DMA3_CURR_ADDR   0xFFC027E0  /* MXVR Sync Data DMA3 Current Address Register */
+#define	MXVR_DMA3_CURR_COUNT  0xFFC027E4  /* MXVR Sync Data DMA3 Current Loop Count Register */
+
+#define	MXVR_DMA4_CONFIG      0xFFC027E8  /* MXVR Sync Data DMA4 Config	Register */
+#define	MXVR_DMA4_START_ADDR  0xFFC027EC  /* MXVR Sync Data DMA4 Start Address Register */
+#define	MXVR_DMA4_COUNT	      0xFFC027F0  /* MXVR Sync Data DMA4 Loop Count Register */
+#define	MXVR_DMA4_CURR_ADDR   0xFFC027F4  /* MXVR Sync Data DMA4 Current Address Register */
+#define	MXVR_DMA4_CURR_COUNT  0xFFC027F8  /* MXVR Sync Data DMA4 Current Loop Count Register */
+
+#define	MXVR_DMA5_CONFIG      0xFFC027FC  /* MXVR Sync Data DMA5 Config	Register */
+#define	MXVR_DMA5_START_ADDR  0xFFC02800  /* MXVR Sync Data DMA5 Start Address Register */
+#define	MXVR_DMA5_COUNT	      0xFFC02804  /* MXVR Sync Data DMA5 Loop Count Register */
+#define	MXVR_DMA5_CURR_ADDR   0xFFC02808  /* MXVR Sync Data DMA5 Current Address Register */
+#define	MXVR_DMA5_CURR_COUNT  0xFFC0280C  /* MXVR Sync Data DMA5 Current Loop Count Register */
+
+#define	MXVR_DMA6_CONFIG      0xFFC02810  /* MXVR Sync Data DMA6 Config	Register */
+#define	MXVR_DMA6_START_ADDR  0xFFC02814  /* MXVR Sync Data DMA6 Start Address Register */
+#define	MXVR_DMA6_COUNT	      0xFFC02818  /* MXVR Sync Data DMA6 Loop Count Register */
+#define	MXVR_DMA6_CURR_ADDR   0xFFC0281C  /* MXVR Sync Data DMA6 Current Address Register */
+#define	MXVR_DMA6_CURR_COUNT  0xFFC02820  /* MXVR Sync Data DMA6 Current Loop Count Register */
+
+#define	MXVR_DMA7_CONFIG      0xFFC02824  /* MXVR Sync Data DMA7 Config	Register */
+#define	MXVR_DMA7_START_ADDR  0xFFC02828  /* MXVR Sync Data DMA7 Start Address Register */
+#define	MXVR_DMA7_COUNT	      0xFFC0282C  /* MXVR Sync Data DMA7 Loop Count Register */
+#define	MXVR_DMA7_CURR_ADDR   0xFFC02830  /* MXVR Sync Data DMA7 Current Address Register */
+#define	MXVR_DMA7_CURR_COUNT  0xFFC02834  /* MXVR Sync Data DMA7 Current Loop Count Register */
+
+#define	MXVR_AP_CTL	      0xFFC02838  /* MXVR Async	Packet Control Register */
+#define	MXVR_APRB_START_ADDR  0xFFC0283C  /* MXVR Async	Packet RX Buffer Start Addr Register */
+#define	MXVR_APRB_CURR_ADDR   0xFFC02840  /* MXVR Async	Packet RX Buffer Current Addr Register */
+#define	MXVR_APTB_START_ADDR  0xFFC02844  /* MXVR Async	Packet TX Buffer Start Addr Register */
+#define	MXVR_APTB_CURR_ADDR   0xFFC02848  /* MXVR Async	Packet TX Buffer Current Addr Register */
+
+#define	MXVR_CM_CTL	      0xFFC0284C  /* MXVR Control Message Control Register */
+#define	MXVR_CMRB_START_ADDR  0xFFC02850  /* MXVR Control Message RX Buffer Start Addr Register */
+#define	MXVR_CMRB_CURR_ADDR   0xFFC02854  /* MXVR Control Message RX Buffer Current Address */
+#define	MXVR_CMTB_START_ADDR  0xFFC02858  /* MXVR Control Message TX Buffer Start Addr Register */
+#define	MXVR_CMTB_CURR_ADDR   0xFFC0285C  /* MXVR Control Message TX Buffer Current Address */
+
+#define	MXVR_RRDB_START_ADDR  0xFFC02860  /* MXVR Remote Read Buffer Start Addr	Register */
+#define	MXVR_RRDB_CURR_ADDR   0xFFC02864  /* MXVR Remote Read Buffer Current Addr Register */
+
+#define	MXVR_PAT_DATA_0	      0xFFC02868  /* MXVR Pattern Data Register	0 */
+#define	MXVR_PAT_EN_0	      0xFFC0286C  /* MXVR Pattern Enable Register 0 */
+#define	MXVR_PAT_DATA_1	      0xFFC02870  /* MXVR Pattern Data Register	1 */
+#define	MXVR_PAT_EN_1	      0xFFC02874  /* MXVR Pattern Enable Register 1 */
+
+#define	MXVR_FRAME_CNT_0      0xFFC02878  /* MXVR Frame	Counter	0 */
+#define	MXVR_FRAME_CNT_1      0xFFC0287C  /* MXVR Frame	Counter	1 */
+
+#define	MXVR_ROUTING_0	      0xFFC02880  /* MXVR Routing Table	Register 0 */
+#define	MXVR_ROUTING_1	      0xFFC02884  /* MXVR Routing Table	Register 1 */
+#define	MXVR_ROUTING_2	      0xFFC02888  /* MXVR Routing Table	Register 2 */
+#define	MXVR_ROUTING_3	      0xFFC0288C  /* MXVR Routing Table	Register 3 */
+#define	MXVR_ROUTING_4	      0xFFC02890  /* MXVR Routing Table	Register 4 */
+#define	MXVR_ROUTING_5	      0xFFC02894  /* MXVR Routing Table	Register 5 */
+#define	MXVR_ROUTING_6	      0xFFC02898  /* MXVR Routing Table	Register 6 */
+#define	MXVR_ROUTING_7	      0xFFC0289C  /* MXVR Routing Table	Register 7 */
+#define	MXVR_ROUTING_8	      0xFFC028A0  /* MXVR Routing Table	Register 8 */
+#define	MXVR_ROUTING_9	      0xFFC028A4  /* MXVR Routing Table	Register 9 */
+#define	MXVR_ROUTING_10	      0xFFC028A8  /* MXVR Routing Table	Register 10 */
+#define	MXVR_ROUTING_11	      0xFFC028AC  /* MXVR Routing Table	Register 11 */
+#define	MXVR_ROUTING_12	      0xFFC028B0  /* MXVR Routing Table	Register 12 */
+#define	MXVR_ROUTING_13	      0xFFC028B4  /* MXVR Routing Table	Register 13 */
+#define	MXVR_ROUTING_14	      0xFFC028B8  /* MXVR Routing Table	Register 14 */
+
+#define	MXVR_PLL_CTL_1	      0xFFC028BC  /* MXVR Phase	Lock Loop Control Register 1 */
+#define	MXVR_BLOCK_CNT	      0xFFC028C0  /* MXVR Block	Counter */
+#define	MXVR_PLL_CTL_2	      0xFFC028C4  /* MXVR Phase	Lock Loop Control Register 2 */
+
+#endif /* _DEF_BF539_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/dma.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/dma.h
new file mode 100644
index 0000000..eb05cac
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/dma.h
@@ -0,0 +1,41 @@
+/* mach/dma.h - arch-specific DMA defines
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define CH_PPI			0
+#define CH_SPORT0_RX		1
+#define CH_SPORT0_TX		2
+#define CH_SPORT1_RX		3
+#define CH_SPORT1_TX		4
+#define CH_SPI0			5
+#define CH_UART0_RX		6
+#define CH_UART0_TX		7
+#define CH_SPORT2_RX		8
+#define CH_SPORT2_TX		9
+#define CH_SPORT3_RX		10
+#define CH_SPORT3_TX		11
+#define CH_SPI1			14
+#define CH_SPI2			15
+#define CH_UART1_RX		16
+#define CH_UART1_TX		17
+#define CH_UART2_RX		18
+#define CH_UART2_TX		19
+
+#define CH_MEM_STREAM0_DEST	20
+#define CH_MEM_STREAM0_SRC	21
+#define CH_MEM_STREAM1_DEST	22
+#define CH_MEM_STREAM1_SRC	23
+#define CH_MEM_STREAM2_DEST	24
+#define CH_MEM_STREAM2_SRC	25
+#define CH_MEM_STREAM3_DEST	26
+#define CH_MEM_STREAM3_SRC	27
+
+#define MAX_DMA_CHANNELS 28
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/gpio.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/gpio.h
new file mode 100644
index 0000000..3561c7d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/gpio.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2008-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define MAX_BLACKFIN_GPIOS 16
+#ifdef CONFIG_GPIOLIB
+/* We only use the special logic with GPIOLIB devices */
+#define BFIN_SPECIAL_GPIO_BANKS 3
+#endif
+
+#define GPIO_PF0	0	/* PF */
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+#define GPIO_PC0	16	/* PC */
+#define GPIO_PC1	17
+#define GPIO_PC4	20
+#define GPIO_PC5	21
+#define GPIO_PC6	22
+#define GPIO_PC7	23
+#define GPIO_PC8	24
+#define GPIO_PC9	25
+#define GPIO_PD0	32	/* PD */
+#define GPIO_PD1	33
+#define GPIO_PD2	34
+#define GPIO_PD3	35
+#define GPIO_PD4	36
+#define GPIO_PD5	37
+#define GPIO_PD6	38
+#define GPIO_PD7	39
+#define GPIO_PD8	40
+#define GPIO_PD9	41
+#define GPIO_PD10	42
+#define GPIO_PD11	43
+#define GPIO_PD12	44
+#define GPIO_PD13	45
+#define GPIO_PE0	48	/* PE */
+#define GPIO_PE1	49
+#define GPIO_PE2	50
+#define GPIO_PE3	51
+#define GPIO_PE4	52
+#define GPIO_PE5	53
+#define GPIO_PE6	54
+#define GPIO_PE7	55
+#define GPIO_PE8	56
+#define GPIO_PE9	57
+#define GPIO_PE10	58
+#define GPIO_PE11	59
+#define GPIO_PE12	60
+#define GPIO_PE13	61
+#define GPIO_PE14	62
+#define GPIO_PE15	63
+
+#define PORT_F GPIO_PF0
+#define PORT_C GPIO_PC0
+#define PORT_D GPIO_PD0
+#define PORT_E GPIO_PE0
+
+#include <mach-common/ports-c.h>
+#include <mach-common/ports-d.h>
+#include <mach-common/ports-e.h>
+#include <mach-common/ports-f.h>
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/irq.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/irq.h
new file mode 100644
index 0000000..07ca069
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/irq.h
@@ -0,0 +1,148 @@
+/*
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BF538_IRQ_H_
+#define _BF538_IRQ_H_
+
+#include <mach-common/irq.h>
+
+#define NR_PERI_INTS		(2 * 32)
+
+#define IRQ_PLL_WAKEUP		BFIN_IRQ(0)	/* PLL Wakeup Interrupt */
+#define IRQ_DMA0_ERROR		BFIN_IRQ(1)	/* DMA Error 0 (generic) */
+#define IRQ_PPI_ERROR		BFIN_IRQ(2)	/* PPI Error */
+#define IRQ_SPORT0_ERROR	BFIN_IRQ(3)	/* SPORT0 Status */
+#define IRQ_SPORT1_ERROR	BFIN_IRQ(4)	/* SPORT1 Status */
+#define IRQ_SPI0_ERROR		BFIN_IRQ(5)	/* SPI0 Status */
+#define IRQ_UART0_ERROR		BFIN_IRQ(6)	/* UART0 Status */
+#define IRQ_RTC			BFIN_IRQ(7)	/* RTC */
+#define IRQ_PPI			BFIN_IRQ(8)	/* DMA Channel 0 (PPI) */
+#define IRQ_SPORT0_RX		BFIN_IRQ(9)	/* DMA 1 Channel (SPORT0 RX) */
+#define IRQ_SPORT0_TX		BFIN_IRQ(10)	/* DMA 2 Channel (SPORT0 TX) */
+#define IRQ_SPORT1_RX		BFIN_IRQ(11)	/* DMA 3 Channel (SPORT1 RX) */
+#define IRQ_SPORT1_TX		BFIN_IRQ(12)	/* DMA 4 Channel (SPORT1 TX) */
+#define IRQ_SPI0		BFIN_IRQ(13)	/* DMA 5 Channel (SPI0) */
+#define IRQ_UART0_RX		BFIN_IRQ(14)	/* DMA 6 Channel (UART0 RX) */
+#define IRQ_UART0_TX		BFIN_IRQ(15)	/* DMA 7 Channel (UART0 TX) */
+#define IRQ_TIMER0		BFIN_IRQ(16)	/* Timer 0 */
+#define IRQ_TIMER1		BFIN_IRQ(17)	/* Timer 1 */
+#define IRQ_TIMER2		BFIN_IRQ(18)	/* Timer 2 */
+#define IRQ_PORTF_INTA		BFIN_IRQ(19)	/* Port F Interrupt A */
+#define IRQ_PORTF_INTB		BFIN_IRQ(20)	/* Port F Interrupt B */
+#define IRQ_MEM0_DMA0		BFIN_IRQ(21)	/* MDMA0 Stream 0 */
+#define IRQ_MEM0_DMA1		BFIN_IRQ(22)	/* MDMA0 Stream 1 */
+#define IRQ_WATCH		BFIN_IRQ(23)	/* Software Watchdog Timer */
+#define IRQ_DMA1_ERROR		BFIN_IRQ(24)	/* DMA Error 1 (generic) */
+#define IRQ_SPORT2_ERROR	BFIN_IRQ(25)	/* SPORT2 Status */
+#define IRQ_SPORT3_ERROR	BFIN_IRQ(26)	/* SPORT3 Status */
+#define IRQ_SPI1_ERROR		BFIN_IRQ(28)	/* SPI1 Status */
+#define IRQ_SPI2_ERROR		BFIN_IRQ(29)	/* SPI2 Status */
+#define IRQ_UART1_ERROR		BFIN_IRQ(30)	/* UART1 Status */
+#define IRQ_UART2_ERROR		BFIN_IRQ(31)	/* UART2 Status */
+#define IRQ_CAN_ERROR		BFIN_IRQ(32)	/* CAN Status (Error) Interrupt */
+#define IRQ_SPORT2_RX		BFIN_IRQ(33)	/* DMA 8 Channel (SPORT2 RX) */
+#define IRQ_SPORT2_TX		BFIN_IRQ(34)	/* DMA 9 Channel (SPORT2 TX) */
+#define IRQ_SPORT3_RX		BFIN_IRQ(35)	/* DMA 10 Channel (SPORT3 RX) */
+#define IRQ_SPORT3_TX		BFIN_IRQ(36)	/* DMA 11 Channel (SPORT3 TX) */
+#define IRQ_SPI1		BFIN_IRQ(39)	/* DMA 14 Channel (SPI1) */
+#define IRQ_SPI2		BFIN_IRQ(40)	/* DMA 15 Channel (SPI2) */
+#define IRQ_UART1_RX		BFIN_IRQ(41)	/* DMA 16 Channel (UART1 RX) */
+#define IRQ_UART1_TX		BFIN_IRQ(42)	/* DMA 17 Channel (UART1 TX) */
+#define IRQ_UART2_RX		BFIN_IRQ(43)	/* DMA 18 Channel (UART2 RX) */
+#define IRQ_UART2_TX		BFIN_IRQ(44)	/* DMA 19 Channel (UART2 TX) */
+#define IRQ_TWI0		BFIN_IRQ(45)	/* TWI0 */
+#define IRQ_TWI1		BFIN_IRQ(46)	/* TWI1 */
+#define IRQ_CAN_RX		BFIN_IRQ(47)	/* CAN Receive Interrupt */
+#define IRQ_CAN_TX		BFIN_IRQ(48)	/* CAN Transmit Interrupt */
+#define IRQ_MEM1_DMA0		BFIN_IRQ(49)	/* MDMA1 Stream 0 */
+#define IRQ_MEM1_DMA1		BFIN_IRQ(50)	/* MDMA1 Stream 1 */
+
+#define SYS_IRQS		BFIN_IRQ(63)	/* 70 */
+
+#define IRQ_PF0			71
+#define IRQ_PF1			72
+#define IRQ_PF2			73
+#define IRQ_PF3			74
+#define IRQ_PF4			75
+#define IRQ_PF5			76
+#define IRQ_PF6			77
+#define IRQ_PF7			78
+#define IRQ_PF8			79
+#define IRQ_PF9			80
+#define IRQ_PF10		81
+#define IRQ_PF11		82
+#define IRQ_PF12		83
+#define IRQ_PF13		84
+#define IRQ_PF14		85
+#define IRQ_PF15		86
+
+#define GPIO_IRQ_BASE		IRQ_PF0
+
+#define NR_MACH_IRQS		(IRQ_PF15 + 1)
+
+/* IAR0 BIT FIELDS */
+#define IRQ_PLL_WAKEUP_POS	0
+#define IRQ_DMA0_ERROR_POS	4
+#define IRQ_PPI_ERROR_POS	8
+#define IRQ_SPORT0_ERROR_POS	12
+#define IRQ_SPORT1_ERROR_POS	16
+#define IRQ_SPI0_ERROR_POS	20
+#define IRQ_UART0_ERROR_POS	24
+#define IRQ_RTC_POS		28
+
+/* IAR1 BIT FIELDS */
+#define IRQ_PPI_POS		0
+#define IRQ_SPORT0_RX_POS	4
+#define IRQ_SPORT0_TX_POS	8
+#define IRQ_SPORT1_RX_POS	12
+#define IRQ_SPORT1_TX_POS	16
+#define IRQ_SPI0_POS		20
+#define IRQ_UART0_RX_POS	24
+#define IRQ_UART0_TX_POS	28
+
+/* IAR2 BIT FIELDS */
+#define IRQ_TIMER0_POS		0
+#define IRQ_TIMER1_POS		4
+#define IRQ_TIMER2_POS		8
+#define IRQ_PORTF_INTA_POS	12
+#define IRQ_PORTF_INTB_POS	16
+#define IRQ_MEM0_DMA0_POS	20
+#define IRQ_MEM0_DMA1_POS	24
+#define IRQ_WATCH_POS		28
+
+/* IAR3 BIT FIELDS */
+#define IRQ_DMA1_ERROR_POS	0
+#define IRQ_SPORT2_ERROR_POS	4
+#define IRQ_SPORT3_ERROR_POS	8
+#define IRQ_SPI1_ERROR_POS	16
+#define IRQ_SPI2_ERROR_POS	20
+#define IRQ_UART1_ERROR_POS	24
+#define IRQ_UART2_ERROR_POS	28
+
+/* IAR4 BIT FIELDS */
+#define IRQ_CAN_ERROR_POS	0
+#define IRQ_SPORT2_RX_POS	4
+#define IRQ_SPORT2_TX_POS	8
+#define IRQ_SPORT3_RX_POS	12
+#define IRQ_SPORT3_TX_POS	16
+#define IRQ_SPI1_POS		28
+
+/* IAR5 BIT FIELDS */
+#define IRQ_SPI2_POS		0
+#define IRQ_UART1_RX_POS	4
+#define IRQ_UART1_TX_POS	8
+#define IRQ_UART2_RX_POS	12
+#define IRQ_UART2_TX_POS	16
+#define IRQ_TWI0_POS		20
+#define IRQ_TWI1_POS		24
+#define IRQ_CAN_RX_POS		28
+
+/* IAR6 BIT FIELDS */
+#define IRQ_CAN_TX_POS		0
+#define IRQ_MEM1_DMA0_POS	4
+#define IRQ_MEM1_DMA1_POS	8
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/mem_map.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/mem_map.h
new file mode 100644
index 0000000..aff00f4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/mem_map.h
@@ -0,0 +1,74 @@
+/*
+ * BF538 memory map
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
+
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0x20300000	 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK2_BASE	0x20200000	 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK1_BASE	0x20100000	 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK0_BASE	0x20000000	 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x00100000	/* 1M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x400
+
+/* Level 1 Memory */
+
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
+#else
+#define BFIN_ICACHESIZE	(0*1024)
+#endif
+
+/* Memory Map for ADSP-BF538/9 processors */
+
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#ifdef CONFIG_BFIN_ICACHE
+#define L1_CODE_LENGTH      (0x14000 - 0x4000)
+#else
+#define L1_CODE_LENGTH      0x14000
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/pll.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/pll.h
new file mode 100644
index 0000000..94cca67
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/pll.h
@@ -0,0 +1 @@
+#include <mach-common/pll.h>
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/portmux.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/portmux.h
new file mode 100644
index 0000000..b773c5f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/include/mach/portmux.h
@@ -0,0 +1,114 @@
+/*
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES	64
+
+#define P_TMR2		(P_DONTCARE)
+#define P_TMR1		(P_DONTCARE)
+#define P_TMR0		(P_DONTCARE)
+#define P_TMRCLK	(P_DONTCARE)
+#define P_PPI0_CLK	(P_DONTCARE)
+#define P_PPI0_FS1	(P_DONTCARE)
+#define P_PPI0_FS2	(P_DONTCARE)
+
+#define P_TWI0_SCL	(P_DONTCARE)
+#define P_TWI0_SDA	(P_DONTCARE)
+#define P_TWI1_SCL	(P_DONTCARE)
+#define P_TWI1_SDA	(P_DONTCARE)
+
+#define P_SPORT1_TSCLK	(P_DONTCARE)
+#define P_SPORT1_RSCLK	(P_DONTCARE)
+#define P_SPORT0_TSCLK	(P_DONTCARE)
+#define P_SPORT0_RSCLK	(P_DONTCARE)
+#define P_SPORT1_DRSEC	(P_DONTCARE)
+#define P_SPORT1_RFS	(P_DONTCARE)
+#define P_SPORT1_DTPRI	(P_DONTCARE)
+#define P_SPORT1_DTSEC	(P_DONTCARE)
+#define P_SPORT1_TFS	(P_DONTCARE)
+#define P_SPORT1_DRPRI	(P_DONTCARE)
+#define P_SPORT0_DRSEC	(P_DONTCARE)
+#define P_SPORT0_RFS	(P_DONTCARE)
+#define P_SPORT0_DTPRI	(P_DONTCARE)
+#define P_SPORT0_DTSEC	(P_DONTCARE)
+#define P_SPORT0_TFS	(P_DONTCARE)
+#define P_SPORT0_DRPRI	(P_DONTCARE)
+
+#define P_UART0_RX	(P_DONTCARE)
+#define P_UART0_TX	(P_DONTCARE)
+
+#define P_SPI0_MOSI	(P_DONTCARE)
+#define P_SPI0_MISO	(P_DONTCARE)
+#define P_SPI0_SCK	(P_DONTCARE)
+
+#define P_PPI0_D0	(P_DONTCARE)
+#define P_PPI0_D1	(P_DONTCARE)
+#define P_PPI0_D2	(P_DONTCARE)
+#define P_PPI0_D3	(P_DONTCARE)
+
+#define P_CAN0_TX	(P_DEFINED | P_IDENT(GPIO_PC0))
+#define P_CAN0_RX	(P_DEFINED | P_IDENT(GPIO_PC1))
+
+#define P_SPI1_MOSI	(P_DEFINED | P_IDENT(GPIO_PD0))
+#define P_SPI1_MISO	(P_DEFINED | P_IDENT(GPIO_PD1))
+#define P_SPI1_SCK	(P_DEFINED | P_IDENT(GPIO_PD2))
+#define P_SPI1_SS	(P_DEFINED | P_IDENT(GPIO_PD3))
+#define P_SPI1_SSEL1	(P_DEFINED | P_IDENT(GPIO_PD4))
+#define P_SPI2_MOSI	(P_DEFINED | P_IDENT(GPIO_PD5))
+#define P_SPI2_MISO	(P_DEFINED | P_IDENT(GPIO_PD6))
+#define P_SPI2_SCK	(P_DEFINED | P_IDENT(GPIO_PD7))
+#define P_SPI2_SS	(P_DEFINED | P_IDENT(GPIO_PD8))
+#define P_SPI2_SSEL1	(P_DEFINED | P_IDENT(GPIO_PD9))
+#define P_UART1_RX	(P_DEFINED | P_IDENT(GPIO_PD10))
+#define P_UART1_TX	(P_DEFINED | P_IDENT(GPIO_PD11))
+#define P_UART2_RX	(P_DEFINED | P_IDENT(GPIO_PD12))
+#define P_UART2_TX	(P_DEFINED | P_IDENT(GPIO_PD13))
+
+#define P_SPORT2_RSCLK	(P_DEFINED | P_IDENT(GPIO_PE0))
+#define P_SPORT2_RFS	(P_DEFINED | P_IDENT(GPIO_PE1))
+#define P_SPORT2_DRPRI	(P_DEFINED | P_IDENT(GPIO_PE2))
+#define P_SPORT2_DRSEC	(P_DEFINED | P_IDENT(GPIO_PE3))
+#define P_SPORT2_TSCLK	(P_DEFINED | P_IDENT(GPIO_PE4))
+#define P_SPORT2_TFS	(P_DEFINED | P_IDENT(GPIO_PE5))
+#define P_SPORT2_DTPRI	(P_DEFINED | P_IDENT(GPIO_PE6))
+#define P_SPORT2_DTSEC	(P_DEFINED | P_IDENT(GPIO_PE7))
+#define P_SPORT3_RSCLK	(P_DEFINED | P_IDENT(GPIO_PE8))
+#define P_SPORT3_RFS	(P_DEFINED | P_IDENT(GPIO_PE9))
+#define P_SPORT3_DRPRI	(P_DEFINED | P_IDENT(GPIO_PE10))
+#define P_SPORT3_DRSEC	(P_DEFINED | P_IDENT(GPIO_PE11))
+#define P_SPORT3_TSCLK	(P_DEFINED | P_IDENT(GPIO_PE12))
+#define P_SPORT3_TFS	(P_DEFINED | P_IDENT(GPIO_PE13))
+#define P_SPORT3_DTPRI	(P_DEFINED | P_IDENT(GPIO_PE14))
+#define P_SPORT3_DTSEC	(P_DEFINED | P_IDENT(GPIO_PE15))
+
+#define P_PPI0_FS3	(P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PF8))
+#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PF9))
+#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PF10))
+#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PF11))
+
+#define P_PPI0_D4	(P_DEFINED | P_IDENT(GPIO_PF15))
+#define P_PPI0_D5	(P_DEFINED | P_IDENT(GPIO_PF14))
+#define P_PPI0_D6	(P_DEFINED | P_IDENT(GPIO_PF13))
+#define P_PPI0_D7	(P_DEFINED | P_IDENT(GPIO_PF12))
+#define P_SPI0_SSEL7	(P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_SPI0_SSEL6	(P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
+#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
+#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/ints-priority.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/ints-priority.c
new file mode 100644
index 0000000..1fa793c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf538/ints-priority.c
@@ -0,0 +1,73 @@
+/*
+ * Set up the interrupt priorities
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <asm/blackfin.h>
+
+void __init program_IAR(void)
+{
+
+	/* Program the IAR0 Register with the configured priority */
+	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
+			((CONFIG_IRQ_DMA0_ERROR - 7) << IRQ_DMA0_ERROR_POS) |
+			((CONFIG_IRQ_PPI_ERROR - 7) << IRQ_PPI_ERROR_POS) |
+			((CONFIG_IRQ_SPORT0_ERROR - 7) << IRQ_SPORT0_ERROR_POS) |
+			((CONFIG_IRQ_SPORT1_ERROR - 7) << IRQ_SPORT1_ERROR_POS) |
+			((CONFIG_IRQ_SPI0_ERROR - 7) << IRQ_SPI0_ERROR_POS) |
+			((CONFIG_IRQ_UART0_ERROR - 7) << IRQ_UART0_ERROR_POS) |
+			((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS));
+
+	bfin_write_SIC_IAR1(((CONFIG_IRQ_PPI - 7) << IRQ_PPI_POS) |
+			((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) |
+			((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) |
+			((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS) |
+			((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) |
+			((CONFIG_IRQ_SPI0 - 7) << IRQ_SPI0_POS) |
+			((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) |
+			((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS));
+
+	bfin_write_SIC_IAR2(((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
+			((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) |
+			((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
+			((CONFIG_IRQ_PORTF_INTA - 7) << IRQ_PORTF_INTA_POS) |
+			((CONFIG_IRQ_PORTF_INTB - 7) << IRQ_PORTF_INTB_POS) |
+			((CONFIG_IRQ_MEM0_DMA0 - 7) << IRQ_MEM0_DMA0_POS) |
+			((CONFIG_IRQ_MEM0_DMA1 - 7) << IRQ_MEM0_DMA1_POS) |
+			((CONFIG_IRQ_WATCH - 7) << IRQ_WATCH_POS));
+
+	bfin_write_SIC_IAR3(((CONFIG_IRQ_DMA1_ERROR - 7) << IRQ_DMA1_ERROR_POS) |
+			((CONFIG_IRQ_SPORT2_ERROR - 7) << IRQ_SPORT2_ERROR_POS) |
+			((CONFIG_IRQ_SPORT3_ERROR - 7) << IRQ_SPORT3_ERROR_POS) |
+			((CONFIG_IRQ_SPI1_ERROR - 7) << IRQ_SPI1_ERROR_POS) |
+			((CONFIG_IRQ_SPI2_ERROR - 7) << IRQ_SPI2_ERROR_POS) |
+			((CONFIG_IRQ_UART1_ERROR - 7) << IRQ_UART1_ERROR_POS) |
+			((CONFIG_IRQ_UART2_ERROR - 7) << IRQ_UART2_ERROR_POS));
+
+	bfin_write_SIC_IAR4(((CONFIG_IRQ_CAN_ERROR - 7) << IRQ_CAN_ERROR_POS) |
+			((CONFIG_IRQ_SPORT2_RX - 7) << IRQ_SPORT2_RX_POS) |
+			((CONFIG_IRQ_SPORT2_TX - 7) << IRQ_SPORT2_TX_POS) |
+			((CONFIG_IRQ_SPORT3_RX - 7) << IRQ_SPORT3_RX_POS) |
+			((CONFIG_IRQ_SPORT3_TX - 7) << IRQ_SPORT3_TX_POS) |
+			((CONFIG_IRQ_SPI1 - 7) << IRQ_SPI1_POS));
+
+	bfin_write_SIC_IAR5(((CONFIG_IRQ_SPI2 - 7) << IRQ_SPI2_POS) |
+			((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) |
+			((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) |
+			((CONFIG_IRQ_UART2_RX - 7) << IRQ_UART2_RX_POS) |
+			((CONFIG_IRQ_UART2_TX - 7) << IRQ_UART2_TX_POS) |
+			((CONFIG_IRQ_TWI0 - 7) << IRQ_TWI0_POS) |
+			((CONFIG_IRQ_TWI1 - 7) << IRQ_TWI1_POS) |
+			((CONFIG_IRQ_CAN_RX - 7) << IRQ_CAN_RX_POS));
+
+	bfin_write_SIC_IAR6(((CONFIG_IRQ_CAN_TX - 7) << IRQ_CAN_TX_POS) |
+			((CONFIG_IRQ_MEM1_DMA0 - 7) << IRQ_MEM1_DMA0_POS) |
+			((CONFIG_IRQ_MEM1_DMA1 - 7) << IRQ_MEM1_DMA1_POS));
+
+	SSYNC();
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/Kconfig
new file mode 100644
index 0000000..71c2a76
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/Kconfig
@@ -0,0 +1,383 @@
+# SPDX-License-Identifier: GPL-2.0
+config BF542
+	def_bool y
+	depends on BF542_std || BF542M
+config BF544
+	def_bool y
+	depends on BF544_std || BF544M
+config BF547
+	def_bool y
+	depends on BF547_std || BF547M
+config BF548
+	def_bool y
+	depends on BF548_std || BF548M
+config BF549
+	def_bool y
+	depends on BF549_std || BF549M
+
+config BF54xM
+	def_bool y
+	depends on (BF542M || BF544M || BF547M || BF548M || BF549M)
+
+config BF54x
+	def_bool y
+	depends on (BF542 || BF544 || BF547 || BF548 || BF549)
+
+if (BF54x)
+
+source "arch/blackfin/mach-bf548/boards/Kconfig"
+
+menu "BF548 Specific Configuration"
+
+config DEB_DMA_URGENT
+	bool "DMA has priority over core for ext. accesses"
+	depends on BF54x
+	default y
+	help
+	  Treat any DEB1, DEB2 and DEB3 request as Urgent
+
+config BF548_ATAPI_ALTERNATIVE_PORT
+	bool "BF548 ATAPI alternative port via GPIO"
+	help
+	  BF548 ATAPI data and address PINs can be routed through
+	  async address or GPIO port F and G. Select y to route it
+	  to GPIO.
+
+choice
+	prompt "UART2 DMA channel selection"
+	depends on SERIAL_BFIN_UART2
+	default UART2_DMA_RX_ON_DMA18
+	help
+		UART2 DMA channel selection
+		RX -> DMA18
+		TX -> DMA19
+		or
+		RX -> DMA13
+		TX -> DMA14
+
+config UART2_DMA_RX_ON_DMA18
+	bool "UART2 DMA RX -> DMA18 TX -> DMA19"
+	help
+		UART2 DMA channel assignment
+		RX -> DMA18
+		TX -> DMA19
+		use SPORT2 default DMA channel
+
+config UART2_DMA_RX_ON_DMA13
+	bool "UART2 DMA RX -> DMA13 TX -> DMA14"
+	help
+		UART2 DMA channel assignment
+		RX -> DMA13
+		TX -> DMA14
+		use EPPI1 EPPI2 default DMA channel
+endchoice
+
+choice
+	prompt "UART3 DMA channel selection"
+	depends on SERIAL_BFIN_UART3
+	default UART3_DMA_RX_ON_DMA20
+	help
+		UART3 DMA channel selection
+		RX -> DMA20
+		TX -> DMA21
+		or
+		RX -> DMA15
+		TX -> DMA16
+
+config UART3_DMA_RX_ON_DMA20
+	bool "UART3 DMA RX -> DMA20 TX -> DMA21"
+	help
+		UART3 DMA channel assignment
+		RX -> DMA20
+		TX -> DMA21
+		use SPORT3 default DMA channel
+
+config UART3_DMA_RX_ON_DMA15
+	bool "UART3 DMA RX -> DMA15 TX -> DMA16"
+	help
+		UART3 DMA channel assignment
+		RX -> DMA15
+		TX -> DMA16
+		use PIXC default DMA channel
+
+endchoice
+
+comment "Interrupt Priority Assignment"
+menu "Priority"
+
+config IRQ_PLL_WAKEUP
+	int "IRQ_PLL_WAKEUP"
+	default 7
+config IRQ_DMAC0_ERR
+	int "IRQ_DMAC0_ERR"
+	default 7
+config IRQ_EPPI0_ERR
+	int "IRQ_EPPI0_ERR"
+	default 7
+config IRQ_SPORT0_ERR
+	int "IRQ_SPORT0_ERR"
+	default 7
+config IRQ_SPORT1_ERR
+	int "IRQ_SPORT1_ERR"
+	default 7
+config IRQ_SPI0_ERR
+	int "IRQ_SPI0_ERR"
+	default 7
+config IRQ_UART0_ERR
+	int "IRQ_UART0_ERR"
+	default 7
+config IRQ_RTC
+	int "IRQ_RTC"
+	default 8
+config IRQ_EPPI0
+	int "IRQ_EPPI0"
+	default 8
+config IRQ_SPORT0_RX
+	int "IRQ_SPORT0_RX"
+	default 9
+config IRQ_SPORT0_TX
+	int "IRQ_SPORT0_TX"
+	default 9
+config IRQ_SPORT1_RX
+	int "IRQ_SPORT1_RX"
+	default 9
+config IRQ_SPORT1_TX
+	int "IRQ_SPORT1_TX"
+	default 9
+config IRQ_SPI0
+	int "IRQ_SPI0"
+	default 10
+config IRQ_UART0_RX
+	int "IRQ_UART0_RX"
+	default 10
+config IRQ_UART0_TX
+	int "IRQ_UART0_TX"
+	default 10
+config IRQ_TIMER8
+	int "IRQ_TIMER8"
+	default 11
+config IRQ_TIMER9
+	int "IRQ_TIMER9"
+	default 11
+config IRQ_TIMER10
+	int "IRQ_TIMER10"
+	default 11
+config IRQ_PINT0
+	int "IRQ_PINT0"
+	default 12
+config IRQ_PINT1
+	int "IRQ_PINT0"
+	default 12
+config IRQ_MDMAS0
+	int "IRQ_MDMAS0"
+	default 13
+config IRQ_MDMAS1
+	int "IRQ_DMDMAS1"
+	default 13
+config IRQ_WATCHDOG
+	int "IRQ_WATCHDOG"
+	default 13
+config IRQ_DMAC1_ERR
+	int "IRQ_DMAC1_ERR"
+	default 7
+config IRQ_SPORT2_ERR
+	int "IRQ_SPORT2_ERR"
+	default 7
+config IRQ_SPORT3_ERR
+	int "IRQ_SPORT3_ERR"
+	default 7
+config IRQ_MXVR_DATA
+	int "IRQ MXVR Data"
+	default 7
+config IRQ_SPI1_ERR
+	int "IRQ_SPI1_ERR"
+	default 7
+config IRQ_SPI2_ERR
+	int "IRQ_SPI2_ERR"
+	default 7
+config IRQ_UART1_ERR
+	int "IRQ_UART1_ERR"
+	default 7
+config IRQ_UART2_ERR
+	int "IRQ_UART2_ERR"
+	default 7
+config IRQ_CAN0_ERR
+	int "IRQ_CAN0_ERR"
+	default 7
+config IRQ_SPORT2_RX
+	int "IRQ_SPORT2_RX"
+	default 9
+config IRQ_SPORT2_TX
+	int "IRQ_SPORT2_TX"
+	default 9
+config IRQ_SPORT3_RX
+	int "IRQ_SPORT3_RX"
+	default 9
+config IRQ_SPORT3_TX
+	int "IRQ_SPORT3_TX"
+	default 9
+config IRQ_EPPI1
+	int "IRQ_EPPI1"
+	default 9
+config IRQ_EPPI2
+	int "IRQ_EPPI2"
+	default 9
+config IRQ_SPI1
+	int "IRQ_SPI1"
+	default 10
+config IRQ_SPI2
+	int "IRQ_SPI2"
+	default 10
+config IRQ_UART1_RX
+	int "IRQ_UART1_RX"
+	default 10
+config IRQ_UART1_TX
+	int "IRQ_UART1_TX"
+	default 10
+config IRQ_ATAPI_RX
+	int "IRQ_ATAPI_RX"
+	default 10
+config IRQ_ATAPI_TX
+	int "IRQ_ATAPI_TX"
+	default 10
+config IRQ_TWI0
+	int "IRQ_TWI0"
+	default 11
+config IRQ_TWI1
+	int "IRQ_TWI1"
+	default 11
+config IRQ_CAN0_RX
+	int "IRQ_CAN_RX"
+	default 11
+config IRQ_CAN0_TX
+	int "IRQ_CAN_TX"
+	default 11
+config IRQ_MDMAS2
+	int "IRQ_MDMAS2"
+	default 13
+config IRQ_MDMAS3
+	int "IRQ_DMMAS3"
+	default 13
+config IRQ_MXVR_ERR
+	int "IRQ_MXVR_ERR"
+	default 11
+config IRQ_MXVR_MSG
+	int "IRQ_MXVR_MSG"
+	default 11
+config IRQ_MXVR_PKT
+	int "IRQ_MXVR_PKT"
+	default 11
+config IRQ_EPPI1_ERR
+	int "IRQ_EPPI1_ERR"
+	default 7
+config IRQ_EPPI2_ERR
+	int "IRQ_EPPI2_ERR"
+	default 7
+config IRQ_UART3_ERR
+	int "IRQ_UART3_ERR"
+	default 7
+config IRQ_HOST_ERR
+	int "IRQ_HOST_ERR"
+	default 7
+config IRQ_PIXC_ERR
+	int "IRQ_PIXC_ERR"
+	default 7
+config IRQ_NFC_ERR
+	int "IRQ_NFC_ERR"
+	default 7
+config IRQ_ATAPI_ERR
+	int "IRQ_ATAPI_ERR"
+	default 7
+config IRQ_CAN1_ERR
+	int "IRQ_CAN1_ERR"
+	default 7
+config IRQ_HS_DMA_ERR
+	int "IRQ Handshake DMA Status"
+	default 7
+config IRQ_PIXC_IN0
+	int "IRQ PIXC IN0"
+	default 8
+config IRQ_PIXC_IN1
+	int "IRQ PIXC IN1"
+	default 8
+config IRQ_PIXC_OUT
+	int "IRQ PIXC OUT"
+	default 8
+config IRQ_SDH
+	int "IRQ SDH"
+	default 8
+config IRQ_CNT
+	int "IRQ CNT"
+	default 8
+config IRQ_KEY
+	int "IRQ KEY"
+	default 8
+config IRQ_CAN1_RX
+	int "IRQ CAN1 RX"
+	default 11
+config IRQ_CAN1_TX
+	int "IRQ_CAN1_TX"
+	default 11
+config IRQ_SDH_MASK0
+	int "IRQ_SDH_MASK0"
+	default 11
+config IRQ_SDH_MASK1
+	int "IRQ_SDH_MASK1"
+	default 11
+config IRQ_USB_INT0
+	int "IRQ USB INT0"
+	default 11
+config IRQ_USB_INT1
+	int "IRQ USB INT1"
+	default 11
+config IRQ_USB_INT2
+	int "IRQ USB INT2"
+	default 11
+config IRQ_USB_DMA
+	int "IRQ USB DMA"
+	default 11
+config IRQ_OTPSEC
+	int "IRQ OPTSEC"
+	default 11
+config IRQ_TIMER0
+	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
+	default 8
+config IRQ_TIMER1
+	int "IRQ_TIMER1"
+	default 11
+config IRQ_TIMER2
+	int "IRQ_TIMER2"
+	default 11
+config IRQ_TIMER3
+	int "IRQ_TIMER3"
+	default 11
+config IRQ_TIMER4
+	int "IRQ_TIMER4"
+	default 11
+config IRQ_TIMER5
+	int "IRQ_TIMER5"
+	default 11
+config IRQ_TIMER6
+	int "IRQ_TIMER6"
+	default 11
+config IRQ_TIMER7
+	int "IRQ_TIMER7"
+	default 11
+config IRQ_PINT2
+	int "IRQ_PIN2"
+	default 11
+config IRQ_PINT3
+	int "IRQ_PIN3"
+	default 11
+
+	help
+	  Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
+	  This applies to all the above.  It is not recommended to assign the
+	  highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/Makefile
new file mode 100644
index 0000000..56994b6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/Makefile
@@ -0,0 +1,5 @@
+#
+# arch/blackfin/mach-bf537/Makefile
+#
+
+obj-y := ints-priority.o dma.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/boards/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/boards/Kconfig
new file mode 100644
index 0000000..e8ce579
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/boards/Kconfig
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+choice
+	prompt "System type"
+	default BFIN548_EZKIT
+	help
+	  Select your board!
+
+config BFIN548_EZKIT
+	bool "BF548-EZKIT"
+	help
+	  BFIN548-EZKIT board support.
+	  
+config BFIN548_BLUETECHNIX_CM
+	bool "Bluetechnix CM-BF548"
+	depends on (BF548)
+	help
+	  CM-BF548 support for DEV-Board.	  
+
+endchoice
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/boards/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/boards/Makefile
new file mode 100644
index 0000000..319ef54
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/boards/Makefile
@@ -0,0 +1,6 @@
+#
+# arch/blackfin/mach-bf548/boards/Makefile
+#
+
+obj-$(CONFIG_BFIN548_EZKIT)            += ezkit.o
+obj-$(CONFIG_BFIN548_BLUETECHNIX_CM)   += cm_bf548.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/boards/cm_bf548.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/boards/cm_bf548.c
new file mode 100644
index 0000000..120c994
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -0,0 +1,1268 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/musb.h>
+#include <linux/gpio.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/dma.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/bfin_sdh.h>
+#include <mach/bf54x_keys.h>
+#include <asm/dpmc.h>
+#include <linux/input.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM-BF548";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)
+
+#include <mach/bf54x-lq043.h>
+
+static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
+	.width =	480,
+	.height =	272,
+	.xres =		{480, 480, 480},
+	.yres =		{272, 272, 272},
+	.bpp =		{24, 24, 24},
+	.disp =		GPIO_PE3,
+};
+
+static struct resource bf54x_lq043_resources[] = {
+	{
+		.start = IRQ_EPPI0_ERR,
+		.end = IRQ_EPPI0_ERR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf54x_lq043_device = {
+	.name		= "bf54x-lq043",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bf54x_lq043_resources),
+	.resource 	= bf54x_lq043_resources,
+	.dev		= {
+		.platform_data = &bf54x_lq043_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
+static unsigned int bf548_keymap[] = {
+	KEYVAL(0, 0, KEY_ENTER),
+	KEYVAL(0, 1, KEY_HELP),
+	KEYVAL(0, 2, KEY_0),
+	KEYVAL(0, 3, KEY_BACKSPACE),
+	KEYVAL(1, 0, KEY_TAB),
+	KEYVAL(1, 1, KEY_9),
+	KEYVAL(1, 2, KEY_8),
+	KEYVAL(1, 3, KEY_7),
+	KEYVAL(2, 0, KEY_DOWN),
+	KEYVAL(2, 1, KEY_6),
+	KEYVAL(2, 2, KEY_5),
+	KEYVAL(2, 3, KEY_4),
+	KEYVAL(3, 0, KEY_UP),
+	KEYVAL(3, 1, KEY_3),
+	KEYVAL(3, 2, KEY_2),
+	KEYVAL(3, 3, KEY_1),
+};
+
+static struct bfin_kpad_platform_data bf54x_kpad_data = {
+	.rows			= 4,
+	.cols			= 4,
+	.keymap 		= bf548_keymap,
+	.keymapsize 		= ARRAY_SIZE(bf548_keymap),
+	.repeat			= 0,
+	.debounce_time		= 5000,	/* ns (5ms) */
+	.coldrive_time		= 1000, /* ns (1ms) */
+	.keyup_test_interval	= 50, /* ms (50ms) */
+};
+
+static struct resource bf54x_kpad_resources[] = {
+	{
+		.start = IRQ_KEY,
+		.end = IRQ_KEY,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf54x_kpad_device = {
+	.name		= "bf54x-keys",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bf54x_kpad_resources),
+	.resource 	= bf54x_kpad_resources,
+	.dev		= {
+		.platform_data = &bf54x_kpad_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_DLL,
+		.end = UART0_RBR+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_DLL,
+		.end = UART1_RBR+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin -- 0 means not supported */
+		.start = GPIO_PE10,
+		.end = GPIO_PE10,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin -- 0 means not supported */
+		.start = GPIO_PE9,
+		.end = GPIO_PE9,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX,
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	P_UART1_RTS, P_UART1_CTS,
+#endif
+	0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+static struct resource bfin_uart2_resources[] = {
+	{
+		.start = UART2_DLL,
+		.end = UART2_RBR+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART2_TX,
+		.end = IRQ_UART2_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART2_RX,
+		.end = IRQ_UART2_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART2_ERROR,
+		.end = IRQ_UART2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART2_TX,
+		.end = CH_UART2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART2_RX,
+		.end = CH_UART2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart2_peripherals[] = {
+	P_UART2_TX, P_UART2_RX, 0
+};
+
+static struct platform_device bfin_uart2_device = {
+	.name = "bfin-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_uart2_resources),
+	.resource = bfin_uart2_resources,
+	.dev = {
+		.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+static struct resource bfin_uart3_resources[] = {
+	{
+		.start = UART3_DLL,
+		.end = UART3_RBR+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART3_TX,
+		.end = IRQ_UART3_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART3_RX,
+		.end = IRQ_UART3_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART3_ERROR,
+		.end = IRQ_UART3_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART3_TX,
+		.end = CH_UART3_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART3_RX,
+		.end = CH_UART3_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	{	/* CTS pin -- 0 means not supported */
+		.start = GPIO_PB3,
+		.end = GPIO_PB3,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin -- 0 means not supported */
+		.start = GPIO_PB2,
+		.end = GPIO_PB2,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static unsigned short bfin_uart3_peripherals[] = {
+	P_UART3_TX, P_UART3_RX,
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	P_UART3_RTS, P_UART3_CTS,
+#endif
+	0
+};
+
+static struct platform_device bfin_uart3_device = {
+	.name = "bfin-uart",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_uart3_resources),
+	.resource = bfin_uart3_resources,
+	.dev = {
+		.platform_data = &bfin_uart3_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR2
+static struct resource bfin_sir2_resources[] = {
+	{
+		.start = 0xFFC02100,
+		.end = 0xFFC021FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART2_RX,
+		.end = IRQ_UART2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART2_RX,
+		.end = CH_UART2_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir2_device = {
+	.name = "bfin_sir",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_sir2_resources),
+	.resource = bfin_sir2_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR3
+static struct resource bfin_sir3_resources[] = {
+	{
+		.start = 0xFFC03100,
+		.end = 0xFFC031FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART3_RX,
+		.end = IRQ_UART3_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART3_RX,
+		.end = CH_UART3_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir3_device = {
+	.name = "bfin_sir",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_sir3_resources),
+	.resource = bfin_sir3_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SMSC911X)
+#include <linux/smsc911x.h>
+
+static struct resource smsc911x_resources[] = {
+	{
+		.name = "smsc911x-memory",
+		.start = 0x24000000,
+		.end = 0x24000000 + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PE6,
+		.end = IRQ_PE6,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_16BIT,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name = "smsc911x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smsc911x_resources),
+	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+static struct resource musb_resources[] = {
+	[0] = {
+		.start	= 0xFFC03C00,
+		.end	= 0xFFC040FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= IRQ_USB_INT0,
+		.end	= IRQ_USB_INT0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "mc"
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= IRQ_USB_DMA,
+		.end	= IRQ_USB_DMA,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "dma"
+	},
+};
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 8,
+	.dma_channels	= 8,
+	.gpio_vrsel	= GPIO_PH6,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
+	.clkin          = 24,           /* musb CLKIN in MHZ */
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.config		= &musb_config,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+	.name		= "musb-blackfin",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+static struct resource bfin_sport2_uart_resources[] = {
+	{
+		.start = SPORT2_TCR1,
+		.end = SPORT2_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT2_RX,
+		.end = IRQ_SPORT2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT2_ERROR,
+		.end = IRQ_SPORT2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport2_peripherals[] = {
+	P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
+	P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
+};
+
+static struct platform_device bfin_sport2_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
+	.resource = bfin_sport2_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+static struct resource bfin_sport3_uart_resources[] = {
+	{
+		.start = SPORT3_TCR1,
+		.end = SPORT3_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT3_RX,
+		.end = IRQ_SPORT3_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT3_ERROR,
+		.end = IRQ_SPORT3_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport3_peripherals[] = {
+	P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
+	P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
+};
+
+static struct platform_device bfin_sport3_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
+	.resource = bfin_sport3_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_BF54X)
+static struct resource bfin_atapi_resources[] = {
+	{
+		.start = 0xFFC03800,
+		.end = 0xFFC0386F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_ATAPI_ERR,
+		.end = IRQ_ATAPI_ERR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_atapi_device = {
+	.name = "pata-bf54x",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_atapi_resources),
+	.resource = bfin_atapi_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
+static struct mtd_partition partition_info[] = {
+	{
+		.name = "linux kernel(nand)",
+		.offset = 0,
+		.size = 4 * 1024 * 1024,
+	},
+	{
+		.name = "file system(nand)",
+		.offset = 4 * 1024 * 1024,
+		.size = (256 - 4) * 1024 * 1024,
+	},
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+	.data_width = NFC_NWIDTH_8,
+	.partitions = partition_info,
+	.nr_partitions = ARRAY_SIZE(partition_info),
+	.rd_dly = 3,
+	.wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+	{
+		.start = 0xFFC03B00,
+		.end = 0xFFC03B4F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_NFC,
+		.end = CH_NFC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf5xx_nand_device = {
+	.name = "bf5xx-nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+	.resource = bf5xx_nand_resources,
+	.dev = {
+		.platform_data = &bf5xx_nand_platform,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SDH_BFIN)
+static struct bfin_sd_host bfin_sdh_data = {
+	.dma_chan = CH_SDH,
+	.irq_int0 = IRQ_SDH_MASK0,
+	.pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0},
+};
+
+static struct platform_device bf54x_sdh_device = {
+	.name = "bfin-sdh",
+	.id = 0,
+	.dev = {
+		.platform_data = &bfin_sdh_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_CAN_BFIN)
+static unsigned short bfin_can_peripherals[] = {
+	P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static struct resource bfin_can_resources[] = {
+	{
+		.start = 0xFFC02A00,
+		.end = 0xFFC02FFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CAN0_RX,
+		.end = IRQ_CAN0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN0_TX,
+		.end = IRQ_CAN0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN0_ERROR,
+		.end = IRQ_CAN0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_can_device = {
+	.name = "bfin_can",
+	.num_resources = ARRAY_SIZE(bfin_can_resources),
+	.resource = bfin_can_resources,
+	.dev = {
+		.platform_data = &bfin_can_peripherals, /* Passed to driver */
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+static struct mtd_partition para_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x100000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data para_flash_data = {
+	.width      = 2,
+	.parts      = para_partitions,
+	.nr_parts   = ARRAY_SIZE(para_partitions),
+};
+
+static struct resource para_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x207fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device para_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &para_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &para_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* all SPI peripherals info goes here */
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+/* SPI flash chip (m25p16) */
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0x1c0000,
+		.offset = 0x40000
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity 	= 1,
+	.first_conversion_delay = 3,
+	.acquisition_time 	= 1,
+	.averaging 		= 1,
+	.pen_down_acc_interval 	= 1,
+};
+#endif
+
+static struct spi_board_info bf54x_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* SPI_SSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+{
+	.modalias		= "ad7877",
+	.platform_data		= &bfin_ad7877_ts_info,
+	.irq			= IRQ_PJ11,
+	.max_speed_hz		= 12500000,     /* max spi clock (SCK) speed in HZ */
+	.bus_num		= 0,
+	.chip_select  		= 2,
+},
+#endif
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+	},
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI0,
+		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI (1) */
+static struct resource bfin_spi1_resource[] = {
+	[0] = {
+		.start = SPI1_REGBASE,
+		.end   = SPI1_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI1,
+		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
+	.num_chipselect = 4,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bf54x_spi_master0 = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bf54x_spi_master_info0, /* Passed to driver */
+		},
+};
+
+static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
+	.num_chipselect = 4,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
+};
+
+static struct platform_device bf54x_spi_master1 = {
+	.name = "bfin-spi",
+	.id = 1, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi1_resource),
+	.resource = bfin_spi1_resource,
+	.dev = {
+		.platform_data = &bf54x_spi_master_info1, /* Passed to driver */
+		},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI0,
+		.end   = IRQ_TWI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi0_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+
+#if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
+static const u16 bfin_twi1_pins[] = {P_TWI1_SCL, P_TWI1_SDA, 0};
+
+static struct resource bfin_twi1_resource[] = {
+	[0] = {
+		.start = TWI1_REGBASE,
+		.end   = TWI1_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI1,
+		.end   = IRQ_TWI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi1_device = {
+	.name = "i2c-bfin-twi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_twi1_resource),
+	.resource = bfin_twi1_resource,
+	.dev = {
+		.platform_data = &bfin_twi1_pins,
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PH7, 1, "gpio-keys: BTN0"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+/*
+ * Internal VLEV BF54XSBBC1533
+ ****temporarily using these values until data sheet is updated
+ */
+	VRPAIR(VLEV_085, 150000000),
+	VRPAIR(VLEV_090, 250000000),
+	VRPAIR(VLEV_110, 276000000),
+	VRPAIR(VLEV_115, 301000000),
+	VRPAIR(VLEV_120, 525000000),
+	VRPAIR(VLEV_125, 550000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *cm_bf548_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	&bfin_uart3_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#ifdef CONFIG_BFIN_SIR2
+	&bfin_sir2_device,
+#endif
+#ifdef CONFIG_BFIN_SIR3
+	&bfin_sir3_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)
+	&bf54x_lq043_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMSC911X)
+	&smsc911x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+	&musb_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_BF54X)
+	&bfin_atapi_device,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
+	&bf5xx_nand_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SDH_BFIN)
+	&bf54x_sdh_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bf54x_spi_master0,
+	&bf54x_spi_master1,
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
+	&bf54x_kpad_device,
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi0_device,
+#if !defined(CONFIG_BF542)
+	&i2c_bfin_twi1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+	&bfin_device_gpiokeys,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+	&para_flash_device,
+#endif
+
+#if IS_ENABLED(CONFIG_CAN_BFIN)
+	&bfin_can_device,
+#endif
+
+};
+
+static int __init cm_bf548_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	spi_register_board_info(bf54x_spi_board_info,
+			ARRAY_SIZE(bf54x_spi_board_info));
+#endif
+
+	return 0;
+}
+
+arch_initcall(cm_bf548_init);
+
+static struct platform_device *cm_bf548_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	&bfin_uart3_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf548_early_devices,
+		ARRAY_SIZE(cm_bf548_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/boards/ezkit.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/boards/ezkit.c
new file mode 100644
index 0000000..3cdd483
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -0,0 +1,2199 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/usb/musb.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/platform_data/pinctrl-adi2.h>
+#include <linux/gpio.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/dma.h>
+#include <asm/nand.h>
+#include <asm/dpmc.h>
+#include <asm/bfin_sport.h>
+#include <asm/portmux.h>
+#include <asm/bfin_sdh.h>
+#include <mach/bf54x_keys.h>
+#include <linux/input.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "ADI BF548-EZKIT";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
+#include <linux/usb/isp1760.h>
+static struct resource bfin_isp1760_resources[] = {
+	[0] = {
+		.start  = 0x2C0C0000,
+		.end    = 0x2C0C0000 + 0xfffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_PG7,
+		.end    = IRQ_PG7,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct isp1760_platform_data isp1760_priv = {
+	.is_isp1761 = 0,
+	.bus_width_16 = 1,
+	.port1_otg = 0,
+	.analog_oc = 0,
+	.dack_polarity_high = 0,
+	.dreq_polarity_high = 0,
+};
+
+static struct platform_device bfin_isp1760_device = {
+	.name           = "isp1760",
+	.id             = 0,
+	.dev = {
+		.platform_data = &isp1760_priv,
+	},
+	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
+	.resource       = bfin_isp1760_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)
+
+#include <mach/bf54x-lq043.h>
+
+static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
+	.width =	95,
+	.height =	54,
+	.xres =		{480, 480, 480},
+	.yres =		{272, 272, 272},
+	.bpp =		{24, 24, 24},
+	.disp =		GPIO_PE3,
+};
+
+static struct resource bf54x_lq043_resources[] = {
+	{
+		.start = IRQ_EPPI0_ERR,
+		.end = IRQ_EPPI0_ERR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf54x_lq043_device = {
+	.name		= "bf54x-lq043",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bf54x_lq043_resources),
+	.resource 	= bf54x_lq043_resources,
+	.dev		= {
+		.platform_data = &bf54x_lq043_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
+static const unsigned int bf548_keymap[] = {
+	KEYVAL(0, 0, KEY_ENTER),
+	KEYVAL(0, 1, KEY_HELP),
+	KEYVAL(0, 2, KEY_0),
+	KEYVAL(0, 3, KEY_BACKSPACE),
+	KEYVAL(1, 0, KEY_TAB),
+	KEYVAL(1, 1, KEY_9),
+	KEYVAL(1, 2, KEY_8),
+	KEYVAL(1, 3, KEY_7),
+	KEYVAL(2, 0, KEY_DOWN),
+	KEYVAL(2, 1, KEY_6),
+	KEYVAL(2, 2, KEY_5),
+	KEYVAL(2, 3, KEY_4),
+	KEYVAL(3, 0, KEY_UP),
+	KEYVAL(3, 1, KEY_3),
+	KEYVAL(3, 2, KEY_2),
+	KEYVAL(3, 3, KEY_1),
+};
+
+static struct bfin_kpad_platform_data bf54x_kpad_data = {
+	.rows			= 4,
+	.cols			= 4,
+	.keymap			= bf548_keymap,
+	.keymapsize		= ARRAY_SIZE(bf548_keymap),
+	.repeat			= 0,
+	.debounce_time		= 5000,	/* ns (5ms) */
+	.coldrive_time		= 1000, /* ns (1ms) */
+	.keyup_test_interval	= 50, /* ms (50ms) */
+};
+
+static struct resource bf54x_kpad_resources[] = {
+	{
+		.start = IRQ_KEY,
+		.end = IRQ_KEY,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf54x_kpad_device = {
+	.name		= "bf54x-keys",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bf54x_kpad_resources),
+	.resource 	= bf54x_kpad_resources,
+	.dev		= {
+		.platform_data = &bf54x_kpad_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
+#include <linux/platform_data/bfin_rotary.h>
+
+static struct bfin_rotary_platform_data bfin_rotary_data = {
+	/*.rotary_up_key     = KEY_UP,*/
+	/*.rotary_down_key   = KEY_DOWN,*/
+	.rotary_rel_code   = REL_WHEEL,
+	.rotary_button_key = KEY_ENTER,
+	.debounce	   = 10,	/* 0..17 */
+	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
+	.pm_wakeup	   = 1,
+};
+
+static struct resource bfin_rotary_resources[] = {
+	{
+		.start = CNT_CONFIG,
+		.end   = CNT_CONFIG + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CNT,
+		.end = IRQ_CNT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_rotary_device = {
+	.name		= "bfin-rotary",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bfin_rotary_resources),
+	.resource 	= bfin_rotary_resources,
+	.dev		= {
+		.platform_data = &bfin_rotary_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
+#include <linux/input/adxl34x.h>
+static const struct adxl34x_platform_data adxl34x_info = {
+	.x_axis_offset = 0,
+	.y_axis_offset = 0,
+	.z_axis_offset = 0,
+	.tap_threshold = 0x31,
+	.tap_duration = 0x10,
+	.tap_latency = 0x60,
+	.tap_window = 0xF0,
+	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+	.act_axis_control = 0xFF,
+	.activity_threshold = 5,
+	.inactivity_threshold = 3,
+	.inactivity_time = 4,
+	.free_fall_threshold = 0x7,
+	.free_fall_time = 0x20,
+	.data_rate = 0x8,
+	.data_range = ADXL_FULL_RES,
+
+	.ev_type = EV_ABS,
+	.ev_code_x = ABS_X,		/* EV_REL */
+	.ev_code_y = ABS_Y,		/* EV_REL */
+	.ev_code_z = ABS_Z,		/* EV_REL */
+
+	.ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
+
+/*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
+/*	.ev_code_act_inactivity = KEY_A,*/	/* EV_KEY */
+	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+	.fifo_mode = ADXL_FIFO_STREAM,
+	.orientation_enable = ADXL_EN_ORIENTATION_3D,
+	.deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
+	.divisor_length = ADXL_LP_FILTER_DIVISOR_16,
+	/* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
+	.ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_DLL,
+		.end = UART0_RBR+2,
+		.flags = IORESOURCE_MEM,
+	},
+#ifdef CONFIG_EARLY_PRINTK
+	{
+		.start = PORTE_FER,
+		.end = PORTE_FER+2,
+		.flags = IORESOURCE_REG,
+	},
+#endif
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_DLL,
+		.end = UART1_RBR+2,
+		.flags = IORESOURCE_MEM,
+	},
+#ifdef CONFIG_EARLY_PRINTK
+	{
+		.start = PORTH_FER,
+		.end = PORTH_FER+2,
+		.flags = IORESOURCE_REG,
+	},
+#endif
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin -- 0 means not supported */
+		.start = GPIO_PE10,
+		.end = GPIO_PE10,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin -- 0 means not supported */
+		.start = GPIO_PE9,
+		.end = GPIO_PE9,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX,
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	P_UART1_RTS, P_UART1_CTS,
+#endif
+	0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+static struct resource bfin_uart2_resources[] = {
+	{
+		.start = UART2_DLL,
+		.end = UART2_RBR+2,
+		.flags = IORESOURCE_MEM,
+	},
+#ifdef CONFIG_EARLY_PRINTK
+	{
+		.start = PORTB_FER,
+		.end = PORTB_FER+2,
+		.flags = IORESOURCE_REG,
+	},
+#endif
+	{
+		.start = IRQ_UART2_TX,
+		.end = IRQ_UART2_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART2_RX,
+		.end = IRQ_UART2_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART2_ERROR,
+		.end = IRQ_UART2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART2_TX,
+		.end = CH_UART2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART2_RX,
+		.end = CH_UART2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart2_peripherals[] = {
+	P_UART2_TX, P_UART2_RX, 0
+};
+
+static struct platform_device bfin_uart2_device = {
+	.name = "bfin-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_uart2_resources),
+	.resource = bfin_uart2_resources,
+	.dev = {
+		.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+static struct resource bfin_uart3_resources[] = {
+	{
+		.start = UART3_DLL,
+		.end = UART3_RBR+2,
+		.flags = IORESOURCE_MEM,
+	},
+#ifdef CONFIG_EARLY_PRINTK
+	{
+		.start = PORTB_FER,
+		.end = PORTB_FER+2,
+		.flags = IORESOURCE_REG,
+	},
+#endif
+	{
+		.start = IRQ_UART3_TX,
+		.end = IRQ_UART3_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART3_RX,
+		.end = IRQ_UART3_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART3_ERROR,
+		.end = IRQ_UART3_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART3_TX,
+		.end = CH_UART3_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART3_RX,
+		.end = CH_UART3_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	{	/* CTS pin -- 0 means not supported */
+		.start = GPIO_PB3,
+		.end = GPIO_PB3,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin -- 0 means not supported */
+		.start = GPIO_PB2,
+		.end = GPIO_PB2,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static unsigned short bfin_uart3_peripherals[] = {
+	P_UART3_TX, P_UART3_RX,
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	P_UART3_RTS, P_UART3_CTS,
+#endif
+	0
+};
+
+static struct platform_device bfin_uart3_device = {
+	.name = "bfin-uart",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_uart3_resources),
+	.resource = bfin_uart3_resources,
+	.dev = {
+		.platform_data = &bfin_uart3_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR2
+static struct resource bfin_sir2_resources[] = {
+	{
+		.start = 0xFFC02100,
+		.end = 0xFFC021FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART2_RX,
+		.end = IRQ_UART2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART2_RX,
+		.end = CH_UART2_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir2_device = {
+	.name = "bfin_sir",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_sir2_resources),
+	.resource = bfin_sir2_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR3
+static struct resource bfin_sir3_resources[] = {
+	{
+		.start = 0xFFC03100,
+		.end = 0xFFC031FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART3_RX,
+		.end = IRQ_UART3_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART3_RX,
+		.end = CH_UART3_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir3_device = {
+	.name = "bfin_sir",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_sir3_resources),
+	.resource = bfin_sir3_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SMSC911X)
+#include <linux/smsc911x.h>
+
+static struct resource smsc911x_resources[] = {
+	{
+		.name = "smsc911x-memory",
+		.start = 0x24000000,
+		.end = 0x24000000 + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PE8,
+		.end = IRQ_PE8,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_32BIT,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name = "smsc911x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smsc911x_resources),
+	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+static struct resource musb_resources[] = {
+	[0] = {
+		.start	= 0xFFC03C00,
+		.end	= 0xFFC040FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= IRQ_USB_INT0,
+		.end	= IRQ_USB_INT0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "mc"
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= IRQ_USB_DMA,
+		.end	= IRQ_USB_DMA,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "dma"
+	},
+};
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 8,
+	.dma_channels	= 8,
+	.gpio_vrsel	= GPIO_PE7,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
+	.clkin          = 24,           /* musb CLKIN in MHZ */
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_HDRC) && defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.config		= &musb_config,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+	.name		= "musb-blackfin",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+static struct resource bfin_sport2_uart_resources[] = {
+	{
+		.start = SPORT2_TCR1,
+		.end = SPORT2_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT2_RX,
+		.end = IRQ_SPORT2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT2_ERROR,
+		.end = IRQ_SPORT2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport2_peripherals[] = {
+	P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
+	P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
+};
+
+static struct platform_device bfin_sport2_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
+	.resource = bfin_sport2_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+static struct resource bfin_sport3_uart_resources[] = {
+	{
+		.start = SPORT3_TCR1,
+		.end = SPORT3_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT3_RX,
+		.end = IRQ_SPORT3_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT3_ERROR,
+		.end = IRQ_SPORT3_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport3_peripherals[] = {
+	P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
+	P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
+};
+
+static struct platform_device bfin_sport3_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
+	.resource = bfin_sport3_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_CAN_BFIN)
+
+static unsigned short bfin_can0_peripherals[] = {
+	P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static struct resource bfin_can0_resources[] = {
+	{
+		.start = 0xFFC02A00,
+		.end = 0xFFC02FFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CAN0_RX,
+		.end = IRQ_CAN0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN0_TX,
+		.end = IRQ_CAN0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN0_ERROR,
+		.end = IRQ_CAN0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_can0_device = {
+	.name = "bfin_can",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_can0_resources),
+	.resource = bfin_can0_resources,
+	.dev = {
+		.platform_data = &bfin_can0_peripherals, /* Passed to driver */
+	},
+};
+
+static unsigned short bfin_can1_peripherals[] = {
+	P_CAN1_RX, P_CAN1_TX, 0
+};
+
+static struct resource bfin_can1_resources[] = {
+	{
+		.start = 0xFFC03200,
+		.end = 0xFFC037FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CAN1_RX,
+		.end = IRQ_CAN1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN1_TX,
+		.end = IRQ_CAN1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN1_ERROR,
+		.end = IRQ_CAN1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_can1_device = {
+	.name = "bfin_can",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_can1_resources),
+	.resource = bfin_can1_resources,
+	.dev = {
+		.platform_data = &bfin_can1_peripherals, /* Passed to driver */
+	},
+};
+
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_BF54X)
+static struct resource bfin_atapi_resources[] = {
+	{
+		.start = 0xFFC03800,
+		.end = 0xFFC0386F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_ATAPI_ERR,
+		.end = IRQ_ATAPI_ERR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_atapi_device = {
+	.name = "pata-bf54x",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_atapi_resources),
+	.resource = bfin_atapi_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
+static struct mtd_partition partition_info[] = {
+	{
+		.name = "bootloader(nand)",
+		.offset = 0,
+		.size = 0x80000,
+	}, {
+		.name = "linux kernel(nand)",
+		.offset = MTDPART_OFS_APPEND,
+		.size = 4 * 1024 * 1024,
+	},
+	{
+		.name = "file system(nand)",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+	.data_width = NFC_NWIDTH_8,
+	.partitions = partition_info,
+	.nr_partitions = ARRAY_SIZE(partition_info),
+	.rd_dly = 3,
+	.wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+	{
+		.start = 0xFFC03B00,
+		.end = 0xFFC03B4F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_NFC,
+		.end = CH_NFC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf5xx_nand_device = {
+	.name = "bf5xx-nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+	.resource = bf5xx_nand_resources,
+	.dev = {
+		.platform_data = &bf5xx_nand_platform,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SDH_BFIN)
+
+static struct bfin_sd_host bfin_sdh_data = {
+	.dma_chan = CH_SDH,
+	.irq_int0 = IRQ_SDH_MASK0,
+	.pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0},
+};
+
+static struct platform_device bf54x_sdh_device = {
+	.name = "bfin-sdh",
+	.id = 0,
+	.dev = {
+		.platform_data = &bfin_sdh_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+static struct mtd_partition ezkit_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x80000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x400000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = 0x1000000 - 0x80000 - 0x400000 - 0x8000 * 4,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "config(nor)",
+		.size       = 0x8000 * 3,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "u-boot env(nor)",
+		.size       = 0x8000,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+	.width      = 2,
+	.parts      = ezkit_partitions,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x21ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezkit_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+/* SPI flash chip (m25p16) */
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00080000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity 	= 1,
+	.first_conversion_delay = 3,
+	.acquisition_time 	= 1,
+	.averaging 		= 1,
+	.pen_down_acc_interval 	= 1,
+};
+#endif
+
+#ifdef CONFIG_PINCTRL_ADI2
+
+# define ADI_PINT_DEVNAME "adi-gpio-pint"
+# define ADI_GPIO_DEVNAME "adi-gpio"
+# define ADI_PINCTRL_DEVNAME "pinctrl-adi2"
+
+static struct platform_device bfin_pinctrl_device = {
+	.name = ADI_PINCTRL_DEVNAME,
+	.id = 0,
+};
+
+static struct resource bfin_pint0_resources[] = {
+	{
+		.start = PINT0_MASK_SET,
+		.end = PINT0_LATCH + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PINT0,
+		.end = IRQ_PINT0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pint0_device = {
+	.name = ADI_PINT_DEVNAME,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_pint0_resources),
+	.resource = bfin_pint0_resources,
+};
+
+static struct resource bfin_pint1_resources[] = {
+	{
+		.start = PINT1_MASK_SET,
+		.end = PINT1_LATCH + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PINT1,
+		.end = IRQ_PINT1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pint1_device = {
+	.name = ADI_PINT_DEVNAME,
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_pint1_resources),
+	.resource = bfin_pint1_resources,
+};
+
+static struct resource bfin_pint2_resources[] = {
+	{
+		.start = PINT2_MASK_SET,
+		.end = PINT2_LATCH + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PINT2,
+		.end = IRQ_PINT2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pint2_device = {
+	.name = ADI_PINT_DEVNAME,
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_pint2_resources),
+	.resource = bfin_pint2_resources,
+};
+
+static struct resource bfin_pint3_resources[] = {
+	{
+		.start = PINT3_MASK_SET,
+		.end = PINT3_LATCH + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PINT3,
+		.end = IRQ_PINT3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pint3_device = {
+	.name = ADI_PINT_DEVNAME,
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_pint3_resources),
+	.resource = bfin_pint3_resources,
+};
+
+static struct resource bfin_gpa_resources[] = {
+	{
+		.start = PORTA_FER,
+		.end = PORTA_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{	/* optional */
+		.start = IRQ_PA0,
+		.end = IRQ_PA0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpa_pdata = {
+	.port_gpio_base	= GPIO_PA0,	/* Optional */
+	.port_pin_base	= GPIO_PA0,
+	.port_width	= GPIO_BANKSIZE,
+	.pint_id	= 0,		/* PINT0 */
+	.pint_assign	= true,		/* PINT upper 16 bit */
+	.pint_map	= 0,		/* mapping mask in PINT */
+};
+
+static struct platform_device bfin_gpa_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_gpa_resources),
+	.resource = bfin_gpa_resources,
+	.dev = {
+		.platform_data = &bfin_gpa_pdata, /* Passed to driver */
+	},
+};
+
+static struct resource bfin_gpb_resources[] = {
+	{
+		.start = PORTB_FER,
+		.end = PORTB_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PB0,
+		.end = IRQ_PB0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpb_pdata = {
+	.port_gpio_base	= GPIO_PB0,
+	.port_pin_base	= GPIO_PB0,
+	.port_width	= 15,
+	.pint_id	= 0,
+	.pint_assign	= true,
+	.pint_map	= 1,
+};
+
+static struct platform_device bfin_gpb_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_gpb_resources),
+	.resource = bfin_gpb_resources,
+	.dev = {
+		.platform_data = &bfin_gpb_pdata, /* Passed to driver */
+	},
+};
+
+static struct resource bfin_gpc_resources[] = {
+	{
+		.start = PORTC_FER,
+		.end = PORTC_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PC0,
+		.end = IRQ_PC0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpc_pdata = {
+	.port_gpio_base	= GPIO_PC0,
+	.port_pin_base	= GPIO_PC0,
+	.port_width	= 14,
+	.pint_id	= 2,
+	.pint_assign	= true,
+	.pint_map	= 0,
+};
+
+static struct platform_device bfin_gpc_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_gpc_resources),
+	.resource = bfin_gpc_resources,
+	.dev = {
+		.platform_data = &bfin_gpc_pdata, /* Passed to driver */
+	},
+};
+
+static struct resource bfin_gpd_resources[] = {
+	{
+		.start = PORTD_FER,
+		.end = PORTD_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PD0,
+		.end = IRQ_PD0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpd_pdata = {
+	.port_gpio_base	= GPIO_PD0,
+	.port_pin_base	= GPIO_PD0,
+	.port_width	= GPIO_BANKSIZE,
+	.pint_id	= 2,
+	.pint_assign	= false,
+	.pint_map	= 1,
+};
+
+static struct platform_device bfin_gpd_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_gpd_resources),
+	.resource = bfin_gpd_resources,
+	.dev = {
+		.platform_data = &bfin_gpd_pdata, /* Passed to driver */
+	},
+};
+
+static struct resource bfin_gpe_resources[] = {
+	{
+		.start = PORTE_FER,
+		.end = PORTE_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PE0,
+		.end = IRQ_PE0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpe_pdata = {
+	.port_gpio_base	= GPIO_PE0,
+	.port_pin_base	= GPIO_PE0,
+	.port_width	= GPIO_BANKSIZE,
+	.pint_id	= 3,
+	.pint_assign	= true,
+	.pint_map	= 2,
+};
+
+static struct platform_device bfin_gpe_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 4,
+	.num_resources = ARRAY_SIZE(bfin_gpe_resources),
+	.resource = bfin_gpe_resources,
+	.dev = {
+		.platform_data = &bfin_gpe_pdata, /* Passed to driver */
+	},
+};
+
+static struct resource bfin_gpf_resources[] = {
+	{
+		.start = PORTF_FER,
+		.end = PORTF_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PF0,
+		.end = IRQ_PF0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpf_pdata = {
+	.port_gpio_base	= GPIO_PF0,
+	.port_pin_base	= GPIO_PF0,
+	.port_width	= GPIO_BANKSIZE,
+	.pint_id	= 3,
+	.pint_assign	= false,
+	.pint_map	= 3,
+};
+
+static struct platform_device bfin_gpf_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 5,
+	.num_resources = ARRAY_SIZE(bfin_gpf_resources),
+	.resource = bfin_gpf_resources,
+	.dev = {
+		.platform_data = &bfin_gpf_pdata, /* Passed to driver */
+	},
+};
+
+static struct resource bfin_gpg_resources[] = {
+	{
+		.start = PORTG_FER,
+		.end = PORTG_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PG0,
+		.end = IRQ_PG0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpg_pdata = {
+	.port_gpio_base	= GPIO_PG0,
+	.port_pin_base	= GPIO_PG0,
+	.port_width	= GPIO_BANKSIZE,
+	.pint_id	= -1,
+};
+
+static struct platform_device bfin_gpg_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 6,
+	.num_resources = ARRAY_SIZE(bfin_gpg_resources),
+	.resource = bfin_gpg_resources,
+	.dev = {
+		.platform_data = &bfin_gpg_pdata, /* Passed to driver */
+	},
+};
+
+static struct resource bfin_gph_resources[] = {
+	{
+		.start = PORTH_FER,
+		.end = PORTH_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PH0,
+		.end = IRQ_PH0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gph_pdata = {
+	.port_gpio_base	= GPIO_PH0,
+	.port_pin_base	= GPIO_PH0,
+	.port_width	= 14,
+	.pint_id	= -1,
+};
+
+static struct platform_device bfin_gph_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 7,
+	.num_resources = ARRAY_SIZE(bfin_gph_resources),
+	.resource = bfin_gph_resources,
+	.dev = {
+		.platform_data = &bfin_gph_pdata, /* Passed to driver */
+	},
+};
+
+static struct resource bfin_gpi_resources[] = {
+	{
+		.start = PORTI_FER,
+		.end = PORTI_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PI0,
+		.end = IRQ_PI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpi_pdata = {
+	.port_gpio_base	= GPIO_PI0,
+	.port_pin_base	= GPIO_PI0,
+	.port_width	= GPIO_BANKSIZE,
+	.pint_id	= -1,
+};
+
+static struct platform_device bfin_gpi_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 8,
+	.num_resources = ARRAY_SIZE(bfin_gpi_resources),
+	.resource = bfin_gpi_resources,
+	.dev = {
+		.platform_data = &bfin_gpi_pdata, /* Passed to driver */
+	},
+};
+
+static struct resource bfin_gpj_resources[] = {
+	{
+		.start = PORTJ_FER,
+		.end = PORTJ_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PJ0,
+		.end = IRQ_PJ0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpj_pdata = {
+	.port_gpio_base	= GPIO_PJ0,
+	.port_pin_base	= GPIO_PJ0,
+	.port_width	= 14,
+	.pint_id	= -1,
+};
+
+static struct platform_device bfin_gpj_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 9,
+	.num_resources = ARRAY_SIZE(bfin_gpj_resources),
+	.resource = bfin_gpj_resources,
+	.dev = {
+		.platform_data = &bfin_gpj_pdata, /* Passed to driver */
+	},
+};
+
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 1,
+		.chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PB4,	/* old boards (<=Rev 1.3) use IRQ_PJ11 */
+		.max_speed_hz		= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num		= 0,
+		.chip_select		= MAX_CTRL_CS + GPIO_PE5, /* SPI_SSEL2 */
+	},
+#endif
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1 */
+	},
+#endif
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI)
+	{
+		.modalias		= "adxl34x",
+		.platform_data		= &adxl34x_info,
+		.irq			= IRQ_PC5,
+		.max_speed_hz		= 5000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num		= 1,
+		.chip_select		= MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI0,
+		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI (1) */
+static struct resource bfin_spi1_resource[] = {
+	[0] = {
+		.start = SPI1_REGBASE,
+		.end   = SPI1_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI1,
+		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
+	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bf54x_spi_master0 = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bf54x_spi_master_info0, /* Passed to driver */
+		},
+};
+
+static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
+	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
+};
+
+static struct platform_device bf54x_spi_master1 = {
+	.name = "bfin-spi",
+	.id = 1, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi1_resource),
+	.resource = bfin_spi1_resource,
+	.dev = {
+		.platform_data = &bf54x_spi_master_info1, /* Passed to driver */
+		},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_capture.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req[] = {
+	P_PPI1_D0, P_PPI1_D1, P_PPI1_D2, P_PPI1_D3,
+	P_PPI1_D4, P_PPI1_D5, P_PPI1_D6, P_PPI1_D7,
+	P_PPI1_CLK, P_PPI1_FS1, P_PPI1_FS2,
+	0,
+};
+
+static const struct ppi_info ppi_info = {
+	.type = PPI_TYPE_EPPI,
+	.dma_ch = CH_EPPI1,
+	.irq_err = IRQ_EPPI1_ERROR,
+	.base = (void __iomem *)EPPI1_STATUS,
+	.pin_req = ppi_req,
+};
+
+#if IS_ENABLED(CONFIG_VIDEO_VS6624)
+static struct v4l2_input vs6624_inputs[] = {
+	{
+		.index = 0,
+		.name = "Camera",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = V4L2_STD_UNKNOWN,
+	},
+};
+
+static struct bcap_route vs6624_routes[] = {
+	{
+		.input = 0,
+		.output = 0,
+	},
+};
+
+static const unsigned vs6624_ce_pin = GPIO_PG6;
+
+static struct bfin_capture_config bfin_capture_data = {
+	.card_name = "BF548",
+	.inputs = vs6624_inputs,
+	.num_inputs = ARRAY_SIZE(vs6624_inputs),
+	.routes = vs6624_routes,
+	.i2c_adapter_id = 0,
+	.board_info = {
+		.type = "vs6624",
+		.addr = 0x10,
+		.platform_data = (void *)&vs6624_ce_pin,
+	},
+	.ppi_info = &ppi_info,
+	.ppi_control = (POLC | PACKEN | DLEN_8 | XFR_TYPE | 0x20),
+	.int_mask = 0xFFFFFFFF, /* disable error interrupt on eppi */
+	.blank_clocks = 8, /* 8 clocks as SAV and EAV */
+};
+#endif
+
+static struct platform_device bfin_capture_device = {
+	.name = "bfin_capture",
+	.dev = {
+		.platform_data = &bfin_capture_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI0,
+		.end   = IRQ_TWI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi0_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+
+#if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
+static const u16 bfin_twi1_pins[] = {P_TWI1_SCL, P_TWI1_SDA, 0};
+
+static struct resource bfin_twi1_resource[] = {
+	[0] = {
+		.start = TWI1_REGBASE,
+		.end   = TWI1_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI1,
+		.end   = IRQ_TWI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi1_device = {
+	.name = "i2c-bfin-twi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_twi1_resource),
+	.resource = bfin_twi1_resource,
+	.dev = {
+		.platform_data = &bfin_twi1_pins,
+	},
+};
+#endif
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
+	{
+		I2C_BOARD_INFO("ssm2602", 0x1b),
+	},
+#endif
+};
+
+#if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
+static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+	},
+#endif
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.irq = 212,
+	},
+#endif
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
+	{
+		I2C_BOARD_INFO("adxl34x", 0x53),
+		.irq = IRQ_PC5,
+		.platform_data = (void *)&adxl34x_info,
+	},
+#endif
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
+	{
+		I2C_BOARD_INFO("ad5252", 0x2f),
+	},
+#endif
+};
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PB8, 1, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PB9, 1, "gpio-keys: BTN1"},
+	{BTN_2, GPIO_PB10, 1, "gpio-keys: BTN2"},
+	{BTN_3, GPIO_PB11, 1, "gpio-keys: BTN3"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+/*
+ * Internal VLEV BF54XSBBC1533
+ ****temporarily using these values until data sheet is updated
+ */
+	VRPAIR(VLEV_085, 150000000),
+	VRPAIR(VLEV_090, 250000000),
+	VRPAIR(VLEV_110, 276000000),
+	VRPAIR(VLEV_115, 301000000),
+	VRPAIR(VLEV_120, 525000000),
+	VRPAIR(VLEV_125, 550000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \
+	IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+
+#define SPORT_REQ(x) \
+	[x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
+		P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
+
+static const u16 bfin_snd_pin[][7] = {
+	SPORT_REQ(0),
+	SPORT_REQ(1),
+	SPORT_REQ(2),
+	SPORT_REQ(3),
+};
+
+static struct bfin_snd_platform_data bfin_snd_data[] = {
+	{
+		.pin_req = &bfin_snd_pin[0][0],
+	},
+	{
+		.pin_req = &bfin_snd_pin[1][0],
+	},
+	{
+		.pin_req = &bfin_snd_pin[2][0],
+	},
+	{
+		.pin_req = &bfin_snd_pin[3][0],
+	},
+};
+
+#define BFIN_SND_RES(x) \
+	[x] = { \
+		{ \
+			.start = SPORT##x##_TCR1, \
+			.end = SPORT##x##_TCR1, \
+			.flags = IORESOURCE_MEM \
+		}, \
+		{ \
+			.start = CH_SPORT##x##_RX, \
+			.end = CH_SPORT##x##_RX, \
+			.flags = IORESOURCE_DMA, \
+		}, \
+		{ \
+			.start = CH_SPORT##x##_TX, \
+			.end = CH_SPORT##x##_TX, \
+			.flags = IORESOURCE_DMA, \
+		}, \
+		{ \
+			.start = IRQ_SPORT##x##_ERROR, \
+			.end = IRQ_SPORT##x##_ERROR, \
+			.flags = IORESOURCE_IRQ, \
+		} \
+	}
+
+static struct resource bfin_snd_resources[][4] = {
+	BFIN_SND_RES(0),
+	BFIN_SND_RES(1),
+	BFIN_SND_RES(2),
+	BFIN_SND_RES(3),
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+static struct platform_device bfin_i2s_pcm = {
+	.name = "bfin-i2s-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+static struct platform_device bfin_ac97_pcm = {
+	.name = "bfin-ac97-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
+static struct platform_device bfin_ad73311_codec_device = {
+	.name = "ad73311",
+	.id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1980)
+static struct platform_device bfin_ad1980_codec_device = {
+	.name = "ad1980",
+	.id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	.num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+	.dev = {
+		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
+static struct platform_device bfin_ac97 = {
+	.name = "bfin-ac97",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	.num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+	.dev = {
+		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+	},
+};
+#endif
+
+static struct platform_device *ezkit_devices[] __initdata = {
+
+	&bfin_dpmc,
+#if defined(CONFIG_PINCTRL_ADI2)
+	&bfin_pinctrl_device,
+	&bfin_pint0_device,
+	&bfin_pint1_device,
+	&bfin_pint2_device,
+	&bfin_pint3_device,
+	&bfin_gpa_device,
+	&bfin_gpb_device,
+	&bfin_gpc_device,
+	&bfin_gpd_device,
+	&bfin_gpe_device,
+	&bfin_gpf_device,
+	&bfin_gpg_device,
+	&bfin_gph_device,
+	&bfin_gpi_device,
+	&bfin_gpj_device,
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	&bfin_uart3_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#ifdef CONFIG_BFIN_SIR2
+	&bfin_sir2_device,
+#endif
+#ifdef CONFIG_BFIN_SIR3
+	&bfin_sir3_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)
+	&bf54x_lq043_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMSC911X)
+	&smsc911x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+	&musb_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
+	&bfin_isp1760_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_CAN_BFIN)
+	&bfin_can0_device,
+	&bfin_can1_device,
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_BF54X)
+	&bfin_atapi_device,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
+	&bf5xx_nand_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SDH_BFIN)
+	&bf54x_sdh_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bf54x_spi_master0,
+	&bf54x_spi_master1,
+#endif
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
+	&bfin_capture_device,
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
+	&bf54x_kpad_device,
+#endif
+
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
+	&bfin_rotary_device,
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi0_device,
+#if !defined(CONFIG_BF542)
+	&i2c_bfin_twi1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+	&bfin_device_gpiokeys,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+	&ezkit_flash_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+	&bfin_i2s_pcm,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+	&bfin_ac97_pcm,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1980)
+	&bfin_ad1980_codec_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+	&bfin_i2s,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+	&bfin_ac97,
+#endif
+};
+
+/* Pin control settings */
+static struct pinctrl_map __initdata bfin_pinmux_map[] = {
+	/* per-device maps */
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.0",  "pinctrl-adi2.0", NULL, "uart0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1",  "pinctrl-adi2.0", NULL, "uart1"),
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1",  "pinctrl-adi2.0", NULL, "uart1_ctsrts"),
+#endif
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.2",  "pinctrl-adi2.0", NULL, "uart2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.3",  "pinctrl-adi2.0", NULL, "uart3"),
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.3",  "pinctrl-adi2.0", NULL, "uart3_ctsrts"),
+#endif
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.0",  "pinctrl-adi2.0", NULL, "uart0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1",  "pinctrl-adi2.0", NULL, "uart1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.2",  "pinctrl-adi2.0", NULL, "uart2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.3",  "pinctrl-adi2.0", NULL, "uart3"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0",  "pinctrl-adi2.0", NULL, "rsi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi.0",  "pinctrl-adi2.0", NULL, "spi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi.1",  "pinctrl-adi2.0", NULL, "spi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0",  "pinctrl-adi2.0", NULL, "twi0"),
+#if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
+	PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1",  "pinctrl-adi2.0", NULL, "twi1"),
+#endif
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary",  "pinctrl-adi2.0", NULL, "rotary"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0",  "pinctrl-adi2.0", NULL, "can0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.1",  "pinctrl-adi2.0", NULL, "can1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bf54x-lq043",  "pinctrl-adi2.0", "ppi0_24bgrp", "ppi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0",  "pinctrl-adi2.0", NULL, "sport0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0",  "pinctrl-adi2.0", NULL, "sport0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.0",  "pinctrl-adi2.0", NULL, "sport0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.1",  "pinctrl-adi2.0", NULL, "sport1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.1",  "pinctrl-adi2.0", NULL, "sport1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.1",  "pinctrl-adi2.0", NULL, "sport1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.2",  "pinctrl-adi2.0", NULL, "sport2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.2",  "pinctrl-adi2.0", NULL, "sport2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.2",  "pinctrl-adi2.0", NULL, "sport2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.3",  "pinctrl-adi2.0", NULL, "sport3"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.3",  "pinctrl-adi2.0", NULL, "sport3"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.3",  "pinctrl-adi2.0", NULL, "sport3"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.0",  "pinctrl-adi2.0", NULL, "sport0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.1",  "pinctrl-adi2.0", NULL, "sport1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.2",  "pinctrl-adi2.0", NULL, "sport2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.3",  "pinctrl-adi2.0", NULL, "sport3"),
+	PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x",  "pinctrl-adi2.0", NULL, "atapi"),
+#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT
+	PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x",  "pinctrl-adi2.0", NULL, "atapi_alter"),
+#endif
+	PIN_MAP_MUX_GROUP_DEFAULT("bf5xx-nand.0",  "pinctrl-adi2.0", NULL, "nfc0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bf54x-keys",  "pinctrl-adi2.0", "keys_4x4grp", "keys"),
+	PIN_MAP_MUX_GROUP("bf54x-keys", "4bit",  "pinctrl-adi2.0", "keys_4x4grp", "keys"),
+	PIN_MAP_MUX_GROUP("bf54x-keys", "8bit",  "pinctrl-adi2.0", "keys_8x8grp", "keys"),
+};
+
+static int __init ezkit_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+	/* Initialize pinmuxing */
+	pinctrl_register_mappings(bfin_pinmux_map,
+				ARRAY_SIZE(bfin_pinmux_map));
+
+	i2c_register_board_info(0, bfin_i2c_board_info0,
+				ARRAY_SIZE(bfin_i2c_board_info0));
+#if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
+	i2c_register_board_info(1, bfin_i2c_board_info1,
+				ARRAY_SIZE(bfin_i2c_board_info1));
+#endif
+
+	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
+
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
+	return 0;
+}
+
+arch_initcall(ezkit_init);
+
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	&bfin_uart3_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/dma.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/dma.c
new file mode 100644
index 0000000..69ead33
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/dma.c
@@ -0,0 +1,139 @@
+/*
+ * the simple DMA Implementation for Blackfin
+ *
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS] = {
+	(struct dma_register *) DMA0_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_NEXT_DESC_PTR,
+	(struct dma_register *) DMA3_NEXT_DESC_PTR,
+	(struct dma_register *) DMA4_NEXT_DESC_PTR,
+	(struct dma_register *) DMA5_NEXT_DESC_PTR,
+	(struct dma_register *) DMA6_NEXT_DESC_PTR,
+	(struct dma_register *) DMA7_NEXT_DESC_PTR,
+	(struct dma_register *) DMA8_NEXT_DESC_PTR,
+	(struct dma_register *) DMA9_NEXT_DESC_PTR,
+	(struct dma_register *) DMA10_NEXT_DESC_PTR,
+	(struct dma_register *) DMA11_NEXT_DESC_PTR,
+	(struct dma_register *) DMA12_NEXT_DESC_PTR,
+	(struct dma_register *) DMA13_NEXT_DESC_PTR,
+	(struct dma_register *) DMA14_NEXT_DESC_PTR,
+	(struct dma_register *) DMA15_NEXT_DESC_PTR,
+	(struct dma_register *) DMA16_NEXT_DESC_PTR,
+	(struct dma_register *) DMA17_NEXT_DESC_PTR,
+	(struct dma_register *) DMA18_NEXT_DESC_PTR,
+	(struct dma_register *) DMA19_NEXT_DESC_PTR,
+	(struct dma_register *) DMA20_NEXT_DESC_PTR,
+	(struct dma_register *) DMA21_NEXT_DESC_PTR,
+	(struct dma_register *) DMA22_NEXT_DESC_PTR,
+	(struct dma_register *) DMA23_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D2_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S2_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D3_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S3_NEXT_DESC_PTR,
+};
+EXPORT_SYMBOL(dma_io_base_addr);
+
+int channel2irq(unsigned int channel)
+{
+	int ret_irq = -1;
+
+	switch (channel) {
+	case CH_SPORT0_RX:
+		ret_irq = IRQ_SPORT0_RX;
+		break;
+	case CH_SPORT0_TX:
+		ret_irq = IRQ_SPORT0_TX;
+		break;
+	case CH_SPORT1_RX:
+		ret_irq = IRQ_SPORT1_RX;
+		break;
+	case CH_SPORT1_TX:
+		ret_irq = IRQ_SPORT1_TX;
+		break;
+	case CH_SPI0:
+		ret_irq = IRQ_SPI0;
+		break;
+	case CH_SPI1:
+		ret_irq = IRQ_SPI1;
+		break;
+	case CH_UART0_RX:
+		ret_irq = IRQ_UART0_RX;
+		break;
+	case CH_UART0_TX:
+		ret_irq = IRQ_UART0_TX;
+		break;
+	case CH_UART1_RX:
+		ret_irq = IRQ_UART1_RX;
+		break;
+	case CH_UART1_TX:
+		ret_irq = IRQ_UART1_TX;
+		break;
+	case CH_EPPI0:
+		ret_irq = IRQ_EPPI0;
+		break;
+	case CH_EPPI1:
+		ret_irq = IRQ_EPPI1;
+		break;
+	case CH_EPPI2:
+		ret_irq = IRQ_EPPI2;
+		break;
+	case CH_PIXC_IMAGE:
+		ret_irq = IRQ_PIXC_IN0;
+		break;
+	case CH_PIXC_OVERLAY:
+		ret_irq = IRQ_PIXC_IN1;
+		break;
+	case CH_PIXC_OUTPUT:
+		ret_irq = IRQ_PIXC_OUT;
+		break;
+	case CH_SPORT2_RX:
+		ret_irq = IRQ_SPORT2_RX;
+		break;
+	case CH_SPORT2_TX:
+		ret_irq = IRQ_SPORT2_TX;
+		break;
+	case CH_SPORT3_RX:
+		ret_irq = IRQ_SPORT3_RX;
+		break;
+	case CH_SPORT3_TX:
+		ret_irq = IRQ_SPORT3_TX;
+		break;
+	case CH_SDH:
+		ret_irq = IRQ_SDH;
+		break;
+	case CH_SPI2:
+		ret_irq = IRQ_SPI2;
+		break;
+	case CH_MEM_STREAM0_SRC:
+	case CH_MEM_STREAM0_DEST:
+		ret_irq = IRQ_MDMAS0;
+		break;
+	case CH_MEM_STREAM1_SRC:
+	case CH_MEM_STREAM1_DEST:
+		ret_irq = IRQ_MDMAS1;
+		break;
+	case CH_MEM_STREAM2_SRC:
+	case CH_MEM_STREAM2_DEST:
+		ret_irq = IRQ_MDMAS2;
+		break;
+	case CH_MEM_STREAM3_SRC:
+	case CH_MEM_STREAM3_DEST:
+		ret_irq = IRQ_MDMAS3;
+		break;
+	}
+	return ret_irq;
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/anomaly.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/anomaly.h
new file mode 100644
index 0000000..098fad6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -0,0 +1,301 @@
+/*
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
+ *
+ * Copyright 2004-2011 Analog Devices Inc.
+ * Licensed under the Clear BSD license.
+ */
+
+/* This file should be up to date with:
+ *  - Revision K, 05/23/2011; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* We do not support 0.0 or 0.1 silicon - sorry */
+#if __SILICON_REVISION__ < 2
+# error will not work on BF548 silicon version 0.0, or 0.1
+#endif
+
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Data Corruption/Core Hang with L2/L3 Configured in Writeback Cache Mode */
+#define ANOMALY_05000220 (__SILICON_REVISION__ < 4)
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (1)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* FIFO Boot Mode Not Functional */
+#define ANOMALY_05000325 (__SILICON_REVISION__ < 2)
+/* bfrom_SysControl() Firmware Function Performs Improper System Reset */
+/*
+ * Note: anomaly sheet says this is fixed with bf54x-0.2+, but testing
+ *       shows that the fix itself does not cover all cases.
+ */
+#define ANOMALY_05000353 (1)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* External Memory Read Access Hangs Core With PLL Bypass */
+#define ANOMALY_05000360 (1)
+/* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */
+#define ANOMALY_05000365 (1)
+/* Addressing Conflict between Boot ROM and Asynchronous Memory */
+#define ANOMALY_05000369 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
+/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
+#define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
+/* 16-Bit NAND FLASH Boot Mode Is Not Functional */
+#define ANOMALY_05000379 (1)
+/* Lockbox SESR Disallows Certain User Interrupts */
+#define ANOMALY_05000404 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
+#define ANOMALY_05000405 (1)
+/* Lockbox SESR Argument Checking Does Not Check L2 Memory Protection Range */
+#define ANOMALY_05000406 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
+#define ANOMALY_05000407 (__SILICON_REVISION__ < 2)
+/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
+#define ANOMALY_05000408 (1)
+/* Lockbox firmware leaves MDMA0 channel enabled */
+#define ANOMALY_05000409 (__SILICON_REVISION__ < 2)
+/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
+#define ANOMALY_05000411 (__SILICON_REVISION__ < 2)
+/* NAND Boot Mode Not Compatible With Some NAND Flash Devices */
+#define ANOMALY_05000413 (__SILICON_REVISION__ < 2)
+/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
+#define ANOMALY_05000414 (__SILICON_REVISION__ < 2)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (__SILICON_REVISION__ < 4)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* CORE_EPPI_PRIO bit and SYS_EPPI_PRIO bit in the HMDMA1_CONTROL register are not functional */
+#define ANOMALY_05000427 (__SILICON_REVISION__ < 2)
+/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
+#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
+/* Software System Reset Corrupts PLL_LOCKCNT Register */
+#define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
+/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+#define ANOMALY_05000431 (__SILICON_REVISION__ < 3)
+/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */
+#define ANOMALY_05000434 (1)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
+/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */
+#define ANOMALY_05000446 (1)
+/* UART IrDA Receiver Fails on Extended Bit Pulses */
+#define ANOMALY_05000447 (1)
+/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */
+#define ANOMALY_05000448 (__SILICON_REVISION__ == 1)
+/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
+#define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
+/* USB DMA Short Packet Data Corruption */
+#define ANOMALY_05000450 (1)
+/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
+#define ANOMALY_05000456 (1)
+/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
+#define ANOMALY_05000457 (1)
+/* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */
+#define ANOMALY_05000460 (__SILICON_REVISION__ < 4)
+/* False Hardware Error when RETI Points to Invalid Memory */
+#define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (__SILICON_REVISION__ < 4)
+/* USB DMA RX Data Corruption */
+#define ANOMALY_05000463 (__SILICON_REVISION__ < 4)
+/* USB TX DMA Hang */
+#define ANOMALY_05000464 (__SILICON_REVISION__ < 4)
+/* USB Rx DMA Hang */
+#define ANOMALY_05000465 (1)
+/* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */
+#define ANOMALY_05000466 (__SILICON_REVISION__ < 4)
+/* Possible USB RX Data Corruption When Control & Data EP FIFOs are Accessed via the Core */
+#define ANOMALY_05000467 (__SILICON_REVISION__ < 4)
+/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */
+#define ANOMALY_05000473 (1)
+/* Access to DDR SDRAM Causes System Hang with Certain PLL Settings */
+#define ANOMALY_05000474 (__SILICON_REVISION__ < 4)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */
+#define ANOMALY_05000483 (1)
+/* DDR Trim May Not Be Performed for Certain VLEV Values in OTP Page PBS00L */
+#define ANOMALY_05000484 (__SILICON_REVISION__ < 3)
+/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */
+#define ANOMALY_05000485 (__SILICON_REVISION__ > 1 && __SILICON_REVISION__ < 4)
+/* PLL May Latch Incorrect Values Coming Out of Reset */
+#define ANOMALY_05000489 (1)
+/* SPI Master Boot Can Fail Under Certain Conditions */
+#define ANOMALY_05000490 (1)
+/* Instruction Memory Stalls Can Cause IFLUSH to Fail */
+#define ANOMALY_05000491 (1)
+/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */
+#define ANOMALY_05000494 (1)
+/* CNT_COMMAND Functionality Depends on CNT_IMASK Configuration */
+#define ANOMALY_05000498 (1)
+/* Nand Flash Controller Hangs When the AMC Requests the Async Pins During the last 16 Bytes of a Page Write Operation. */
+#define ANOMALY_05000500 (1)
+/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */
+#define ANOMALY_05000501 (1)
+/* Async Memory Writes May Be Skipped When Using Odd Clock Ratios */
+#define ANOMALY_05000502 (1)
+
+/*
+ * These anomalies have been "phased" out of analog.com anomaly sheets and are
+ * here to show running on older silicon just isn't feasible.
+ */
+
+/* False Hardware Error when ISR Context Is Not Restored */
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 1)
+/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
+#define ANOMALY_05000304 (__SILICON_REVISION__ < 1)
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (__SILICON_REVISION__ < 1)
+/* TWI Slave Boot Mode Is Not Functional */
+#define ANOMALY_05000324 (__SILICON_REVISION__ < 1)
+/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
+#define ANOMALY_05000327 (__SILICON_REVISION__ < 1)
+/* Incorrect Access of OTP_STATUS During otp_write() Function */
+#define ANOMALY_05000328 (__SILICON_REVISION__ < 1)
+/* Synchronous Burst Flash Boot Mode Is Not Functional */
+#define ANOMALY_05000329 (__SILICON_REVISION__ < 1)
+/* Host DMA Boot Modes Are Not Functional */
+#define ANOMALY_05000330 (__SILICON_REVISION__ < 1)
+/* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */
+#define ANOMALY_05000334 (__SILICON_REVISION__ < 1)
+/* Inadequate Rotary Debounce Logic Duration */
+#define ANOMALY_05000335 (__SILICON_REVISION__ < 1)
+/* Phantom Interrupt Occurs After First Configuration of Host DMA Port */
+#define ANOMALY_05000336 (__SILICON_REVISION__ < 1)
+/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
+#define ANOMALY_05000337 (__SILICON_REVISION__ < 1)
+/* Slave-Mode SPI0 MISO Failure With CPHA = 0 */
+#define ANOMALY_05000338 (__SILICON_REVISION__ < 1)
+/* If Memory Reads Are Enabled on SDH or HOSTDP, Other DMAC1 Peripherals Cannot Read */
+#define ANOMALY_05000340 (__SILICON_REVISION__ < 1)
+/* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */
+#define ANOMALY_05000344 (__SILICON_REVISION__ < 1)
+/* USB Calibration Value Is Not Initialized */
+#define ANOMALY_05000346 (__SILICON_REVISION__ < 1)
+/* USB Calibration Value to use */
+#define ANOMALY_05000346_value 0x5411
+/* Preboot Routine Incorrectly Alters Reset Value of USB Register */
+#define ANOMALY_05000347 (__SILICON_REVISION__ < 1)
+/* Data Lost when Core Reads SDH Data FIFO */
+#define ANOMALY_05000349 (__SILICON_REVISION__ < 1)
+/* PLL Status Register Is Inaccurate */
+#define ANOMALY_05000351 (__SILICON_REVISION__ < 1)
+/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
+#define ANOMALY_05000355 (__SILICON_REVISION__ < 1)
+/* System Stalled During A Core Access To AMC While A Core Access To NFC FIFO Is Required */
+#define ANOMALY_05000356 (__SILICON_REVISION__ < 1)
+/* WURESET Bit In SYSCR Register Does Not Properly Indicate Hibernate Wake-Up */
+#define ANOMALY_05000367 (__SILICON_REVISION__ < 1)
+/* Default PLL MSEL and SSEL Settings Can Cause 400MHz Product To Violate Specifications */
+#define ANOMALY_05000370 (__SILICON_REVISION__ < 1)
+/* USB DP/DM Data Pins May Lose State When Entering Hibernate */
+#define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
+/* 8-Bit NAND Flash Boot Mode Not Functional */
+#define ANOMALY_05000382 (__SILICON_REVISION__ < 1)
+/* Boot from OTP Memory Not Functional */
+#define ANOMALY_05000385 (__SILICON_REVISION__ < 1)
+/* bfrom_SysControl() Firmware Routine Not Functional */
+#define ANOMALY_05000386 (__SILICON_REVISION__ < 1)
+/* Programmable Preboot Settings Not Functional */
+#define ANOMALY_05000387 (__SILICON_REVISION__ < 1)
+/* CRC32 Checksum Support Not Functional */
+#define ANOMALY_05000388 (__SILICON_REVISION__ < 1)
+/* Reset Vector Must Not Be in SDRAM Memory Space */
+#define ANOMALY_05000389 (__SILICON_REVISION__ < 1)
+/* Changed Meaning of BCODE Field in SYSCR Register */
+#define ANOMALY_05000390 (__SILICON_REVISION__ < 1)
+/* Repeated Boot from Page-Mode or Burst-Mode Flash Memory May Fail */
+#define ANOMALY_05000391 (__SILICON_REVISION__ < 1)
+/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000392 (__SILICON_REVISION__ < 1)
+/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000393 (__SILICON_REVISION__ < 1)
+/* Log Buffer Not Functional */
+#define ANOMALY_05000394 (__SILICON_REVISION__ < 1)
+/* Hook Routine Not Functional */
+#define ANOMALY_05000395 (__SILICON_REVISION__ < 1)
+/* Header Indirect Bit Not Functional */
+#define ANOMALY_05000396 (__SILICON_REVISION__ < 1)
+/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
+#define ANOMALY_05000397 (__SILICON_REVISION__ < 1)
+/* OTP Write Accesses Not Supported */
+#define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (__SILICON_REVISION__ < 1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
+#define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
+#define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000219 (0)
+#define ANOMALY_05000227 (0)
+#define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
+#define ANOMALY_05000242 (0)
+#define ANOMALY_05000244 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
+#define ANOMALY_05000254 (0)
+#define ANOMALY_05000257 (0)
+#define ANOMALY_05000261 (0)
+#define ANOMALY_05000263 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000273 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000278 (0)
+#define ANOMALY_05000283 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000301 (0)
+#define ANOMALY_05000305 (0)
+#define ANOMALY_05000307 (0)
+#define ANOMALY_05000311 (0)
+#define ANOMALY_05000315 (0)
+#define ANOMALY_05000323 (0)
+#define ANOMALY_05000362 (1)
+#define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
+#define ANOMALY_05000380 (0)
+#define ANOMALY_05000400 (0)
+#define ANOMALY_05000402 (0)
+#define ANOMALY_05000412 (0)
+#define ANOMALY_05000432 (0)
+#define ANOMALY_05000435 (0)
+#define ANOMALY_05000440 (0)
+#define ANOMALY_05000475 (0)
+#define ANOMALY_05000480 (0)
+#define ANOMALY_16000030 (0)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/bf548.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/bf548.h
new file mode 100644
index 0000000..751e5e1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/bf548.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __MACH_BF548_H__
+#define __MACH_BF548_H__
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15		0x8000
+#define IMASK_IVG14		0x4000
+#define IMASK_IVG13		0x2000
+#define IMASK_IVG12		0x1000
+
+#define IMASK_IVG11		0x0800
+#define IMASK_IVG10		0x0400
+#define IMASK_IVG9		0x0200
+#define IMASK_IVG8		0x0100
+
+#define IMASK_IVG7		0x0080
+#define IMASK_IVGTMR	0x0040
+#define IMASK_IVGHW		0x0020
+
+/***************************/
+
+
+#define BFIN_DSUBBANKS	4
+#define BFIN_DWAYS		2
+#define BFIN_DLINES		64
+#define BFIN_ISUBBANKS	4
+#define BFIN_IWAYS		4
+#define BFIN_ILINES		32
+
+#define WAY0_L			0x1
+#define WAY1_L			0x2
+#define WAY01_L			0x3
+#define WAY2_L			0x4
+#define WAY02_L			0x5
+#define	WAY12_L			0x6
+#define	WAY012_L		0x7
+
+#define	WAY3_L			0x8
+#define	WAY03_L			0x9
+#define	WAY13_L			0xA
+#define	WAY013_L		0xB
+
+#define	WAY32_L			0xC
+#define	WAY320_L		0xD
+#define	WAY321_L		0xE
+#define	WAYALL_L		0xF
+
+#define DMC_ENABLE (2<<2)	/*yes, 2, not 1 */
+
+/********************************* EBIU Settings ************************************/
+#define AMBCTL0VAL	((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL	((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#ifdef CONFIG_C_AMBEN_ALL
+#define V_AMBEN AMBEN_ALL
+#endif
+#ifdef CONFIG_C_AMBEN
+#define V_AMBEN 0x0
+#endif
+#ifdef CONFIG_C_AMBEN_B0
+#define V_AMBEN AMBEN_B0
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1
+#define V_AMBEN AMBEN_B0_B1
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1_B2
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+
+#define AMGCTLVAL	(V_AMBEN | V_AMCKEN)
+
+#if defined(CONFIG_BF542)
+# define CPU   "BF542"
+# define CPUID 0x27de
+#elif defined(CONFIG_BF544)
+# define CPU   "BF544"
+# define CPUID 0x27de
+#elif defined(CONFIG_BF547)
+# define CPU   "BF547"
+# define CPUID 0x27de
+#elif defined(CONFIG_BF548)
+# define CPU   "BF548"
+# define CPUID 0x27de
+#elif defined(CONFIG_BF549)
+# define CPU   "BF549"
+# define CPUID 0x27de
+#endif
+
+#ifndef CPU
+#error "Unknown CPU type - This kernel doesn't seem to be configured properly"
+#endif
+
+#endif	/* __MACH_BF48_H__  */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h
new file mode 100644
index 0000000..8821efe
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef BF54X_LQ043_H
+#define BF54X_LQ043_H
+
+struct bfin_bf54xfb_val {
+	unsigned int	defval;
+	unsigned int	min;
+	unsigned int	max;
+};
+
+struct bfin_bf54xfb_mach_info {
+	unsigned char	fixed_syncs;	/* do not update sync/border */
+
+	/* LCD types */
+	int		type;
+
+	/* Screen size */
+	int		width;
+	int		height;
+
+	/* Screen info */
+	struct bfin_bf54xfb_val xres;
+	struct bfin_bf54xfb_val yres;
+	struct bfin_bf54xfb_val bpp;
+
+	/* GPIOs */
+	unsigned short 		disp;
+
+};
+
+#endif /* BF54X_LQ043_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h
new file mode 100644
index 0000000..49338ae
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BFIN_KPAD_H
+#define _BFIN_KPAD_H
+
+struct bfin_kpad_platform_data {
+	int rows;
+	int cols;
+	const unsigned int *keymap;
+	unsigned short keymapsize;
+	unsigned short repeat;
+	u32 debounce_time;	/* in ns */
+	u32 coldrive_time;	/* in ns */
+	u32 keyup_test_interval; /* in ms */
+};
+
+#define KEYVAL(col, row, val) (((1 << col) << 24) | ((1 << row) << 16) | (val))
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/bfin_serial.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/bfin_serial.h
new file mode 100644
index 0000000..a77109f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/bfin_serial.h
@@ -0,0 +1,16 @@
+/*
+ * mach/bfin_serial.h - Blackfin UART/Serial definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_SERIAL_H__
+#define __BFIN_MACH_SERIAL_H__
+
+#define BFIN_UART_NR_PORTS	4
+
+#define BFIN_UART_BF54X_STYLE
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/blackfin.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/blackfin.h
new file mode 100644
index 0000000..72da721
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/blackfin.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#include "bf548.h"
+#include "anomaly.h"
+
+#include <asm/def_LPBlackfin.h>
+#ifdef CONFIG_BF542
+# include "defBF542.h"
+#endif
+#ifdef CONFIG_BF544
+# include "defBF544.h"
+#endif
+#ifdef CONFIG_BF547
+# include "defBF547.h"
+#endif
+#ifdef CONFIG_BF548
+# include "defBF548.h"
+#endif
+#ifdef CONFIG_BF549
+# include "defBF549.h"
+#endif
+
+#ifndef __ASSEMBLY__
+# include <asm/cdef_LPBlackfin.h>
+# ifdef CONFIG_BF542
+#  include "cdefBF542.h"
+# endif
+# ifdef CONFIG_BF544
+#  include "cdefBF544.h"
+# endif
+# ifdef CONFIG_BF547
+#  include "cdefBF547.h"
+# endif
+# ifdef CONFIG_BF548
+#  include "cdefBF548.h"
+# endif
+# ifdef CONFIG_BF549
+#  include "cdefBF549.h"
+# endif
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF542.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF542.h
new file mode 100644
index 0000000..9163479
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF542.h
@@ -0,0 +1,554 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _CDEF_BF542_H
+#define _CDEF_BF542_H
+
+/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
+#include "cdefBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF542 that are not in the common header */
+
+/* ATAPI Registers */
+
+#define bfin_read_ATAPI_CONTROL()		bfin_read16(ATAPI_CONTROL)
+#define bfin_write_ATAPI_CONTROL(val)		bfin_write16(ATAPI_CONTROL, val)
+#define bfin_read_ATAPI_STATUS()		bfin_read16(ATAPI_STATUS)
+#define bfin_write_ATAPI_STATUS(val)		bfin_write16(ATAPI_STATUS, val)
+#define bfin_read_ATAPI_DEV_ADDR()		bfin_read16(ATAPI_DEV_ADDR)
+#define bfin_write_ATAPI_DEV_ADDR(val)		bfin_write16(ATAPI_DEV_ADDR, val)
+#define bfin_read_ATAPI_DEV_TXBUF()		bfin_read16(ATAPI_DEV_TXBUF)
+#define bfin_write_ATAPI_DEV_TXBUF(val)		bfin_write16(ATAPI_DEV_TXBUF, val)
+#define bfin_read_ATAPI_DEV_RXBUF()		bfin_read16(ATAPI_DEV_RXBUF)
+#define bfin_write_ATAPI_DEV_RXBUF(val)		bfin_write16(ATAPI_DEV_RXBUF, val)
+#define bfin_read_ATAPI_INT_MASK()		bfin_read16(ATAPI_INT_MASK)
+#define bfin_write_ATAPI_INT_MASK(val)		bfin_write16(ATAPI_INT_MASK, val)
+#define bfin_read_ATAPI_INT_STATUS()		bfin_read16(ATAPI_INT_STATUS)
+#define bfin_write_ATAPI_INT_STATUS(val)	bfin_write16(ATAPI_INT_STATUS, val)
+#define bfin_read_ATAPI_XFER_LEN()		bfin_read16(ATAPI_XFER_LEN)
+#define bfin_write_ATAPI_XFER_LEN(val)		bfin_write16(ATAPI_XFER_LEN, val)
+#define bfin_read_ATAPI_LINE_STATUS()		bfin_read16(ATAPI_LINE_STATUS)
+#define bfin_write_ATAPI_LINE_STATUS(val)	bfin_write16(ATAPI_LINE_STATUS, val)
+#define bfin_read_ATAPI_SM_STATE()		bfin_read16(ATAPI_SM_STATE)
+#define bfin_write_ATAPI_SM_STATE(val)		bfin_write16(ATAPI_SM_STATE, val)
+#define bfin_read_ATAPI_TERMINATE()		bfin_read16(ATAPI_TERMINATE)
+#define bfin_write_ATAPI_TERMINATE(val)		bfin_write16(ATAPI_TERMINATE, val)
+#define bfin_read_ATAPI_PIO_TFRCNT()		bfin_read16(ATAPI_PIO_TFRCNT)
+#define bfin_write_ATAPI_PIO_TFRCNT(val)	bfin_write16(ATAPI_PIO_TFRCNT, val)
+#define bfin_read_ATAPI_DMA_TFRCNT()		bfin_read16(ATAPI_DMA_TFRCNT)
+#define bfin_write_ATAPI_DMA_TFRCNT(val)	bfin_write16(ATAPI_DMA_TFRCNT, val)
+#define bfin_read_ATAPI_UMAIN_TFRCNT()		bfin_read16(ATAPI_UMAIN_TFRCNT)
+#define bfin_write_ATAPI_UMAIN_TFRCNT(val)	bfin_write16(ATAPI_UMAIN_TFRCNT, val)
+#define bfin_read_ATAPI_UDMAOUT_TFRCNT()	bfin_read16(ATAPI_UDMAOUT_TFRCNT)
+#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val)	bfin_write16(ATAPI_UDMAOUT_TFRCNT, val)
+#define bfin_read_ATAPI_REG_TIM_0()		bfin_read16(ATAPI_REG_TIM_0)
+#define bfin_write_ATAPI_REG_TIM_0(val)		bfin_write16(ATAPI_REG_TIM_0, val)
+#define bfin_read_ATAPI_PIO_TIM_0()		bfin_read16(ATAPI_PIO_TIM_0)
+#define bfin_write_ATAPI_PIO_TIM_0(val)		bfin_write16(ATAPI_PIO_TIM_0, val)
+#define bfin_read_ATAPI_PIO_TIM_1()		bfin_read16(ATAPI_PIO_TIM_1)
+#define bfin_write_ATAPI_PIO_TIM_1(val)		bfin_write16(ATAPI_PIO_TIM_1, val)
+#define bfin_read_ATAPI_MULTI_TIM_0()		bfin_read16(ATAPI_MULTI_TIM_0)
+#define bfin_write_ATAPI_MULTI_TIM_0(val)	bfin_write16(ATAPI_MULTI_TIM_0, val)
+#define bfin_read_ATAPI_MULTI_TIM_1()		bfin_read16(ATAPI_MULTI_TIM_1)
+#define bfin_write_ATAPI_MULTI_TIM_1(val)	bfin_write16(ATAPI_MULTI_TIM_1, val)
+#define bfin_read_ATAPI_MULTI_TIM_2()		bfin_read16(ATAPI_MULTI_TIM_2)
+#define bfin_write_ATAPI_MULTI_TIM_2(val)	bfin_write16(ATAPI_MULTI_TIM_2, val)
+#define bfin_read_ATAPI_ULTRA_TIM_0()		bfin_read16(ATAPI_ULTRA_TIM_0)
+#define bfin_write_ATAPI_ULTRA_TIM_0(val)	bfin_write16(ATAPI_ULTRA_TIM_0, val)
+#define bfin_read_ATAPI_ULTRA_TIM_1()		bfin_read16(ATAPI_ULTRA_TIM_1)
+#define bfin_write_ATAPI_ULTRA_TIM_1(val)	bfin_write16(ATAPI_ULTRA_TIM_1, val)
+#define bfin_read_ATAPI_ULTRA_TIM_2()		bfin_read16(ATAPI_ULTRA_TIM_2)
+#define bfin_write_ATAPI_ULTRA_TIM_2(val)	bfin_write16(ATAPI_ULTRA_TIM_2, val)
+#define bfin_read_ATAPI_ULTRA_TIM_3()		bfin_read16(ATAPI_ULTRA_TIM_3)
+#define bfin_write_ATAPI_ULTRA_TIM_3(val)	bfin_write16(ATAPI_ULTRA_TIM_3, val)
+
+/* SDH Registers */
+
+#define bfin_read_SDH_PWR_CTL()		bfin_read16(SDH_PWR_CTL)
+#define bfin_write_SDH_PWR_CTL(val)	bfin_write16(SDH_PWR_CTL, val)
+#define bfin_read_SDH_CLK_CTL()		bfin_read16(SDH_CLK_CTL)
+#define bfin_write_SDH_CLK_CTL(val)	bfin_write16(SDH_CLK_CTL, val)
+#define bfin_read_SDH_ARGUMENT()	bfin_read32(SDH_ARGUMENT)
+#define bfin_write_SDH_ARGUMENT(val)	bfin_write32(SDH_ARGUMENT, val)
+#define bfin_read_SDH_COMMAND()		bfin_read16(SDH_COMMAND)
+#define bfin_write_SDH_COMMAND(val)	bfin_write16(SDH_COMMAND, val)
+#define bfin_read_SDH_RESP_CMD()	bfin_read16(SDH_RESP_CMD)
+#define bfin_write_SDH_RESP_CMD(val)	bfin_write16(SDH_RESP_CMD, val)
+#define bfin_read_SDH_RESPONSE0()	bfin_read32(SDH_RESPONSE0)
+#define bfin_write_SDH_RESPONSE0(val)	bfin_write32(SDH_RESPONSE0, val)
+#define bfin_read_SDH_RESPONSE1()	bfin_read32(SDH_RESPONSE1)
+#define bfin_write_SDH_RESPONSE1(val)	bfin_write32(SDH_RESPONSE1, val)
+#define bfin_read_SDH_RESPONSE2()	bfin_read32(SDH_RESPONSE2)
+#define bfin_write_SDH_RESPONSE2(val)	bfin_write32(SDH_RESPONSE2, val)
+#define bfin_read_SDH_RESPONSE3()	bfin_read32(SDH_RESPONSE3)
+#define bfin_write_SDH_RESPONSE3(val)	bfin_write32(SDH_RESPONSE3, val)
+#define bfin_read_SDH_DATA_TIMER()	bfin_read32(SDH_DATA_TIMER)
+#define bfin_write_SDH_DATA_TIMER(val)	bfin_write32(SDH_DATA_TIMER, val)
+#define bfin_read_SDH_DATA_LGTH()	bfin_read16(SDH_DATA_LGTH)
+#define bfin_write_SDH_DATA_LGTH(val)	bfin_write16(SDH_DATA_LGTH, val)
+#define bfin_read_SDH_DATA_CTL()	bfin_read16(SDH_DATA_CTL)
+#define bfin_write_SDH_DATA_CTL(val)	bfin_write16(SDH_DATA_CTL, val)
+#define bfin_read_SDH_DATA_CNT()	bfin_read16(SDH_DATA_CNT)
+#define bfin_write_SDH_DATA_CNT(val)	bfin_write16(SDH_DATA_CNT, val)
+#define bfin_read_SDH_STATUS()		bfin_read32(SDH_STATUS)
+#define bfin_write_SDH_STATUS(val)	bfin_write32(SDH_STATUS, val)
+#define bfin_read_SDH_STATUS_CLR()	bfin_read16(SDH_STATUS_CLR)
+#define bfin_write_SDH_STATUS_CLR(val)	bfin_write16(SDH_STATUS_CLR, val)
+#define bfin_read_SDH_MASK0()		bfin_read32(SDH_MASK0)
+#define bfin_write_SDH_MASK0(val)	bfin_write32(SDH_MASK0, val)
+#define bfin_read_SDH_MASK1()		bfin_read32(SDH_MASK1)
+#define bfin_write_SDH_MASK1(val)	bfin_write32(SDH_MASK1, val)
+#define bfin_read_SDH_FIFO_CNT()	bfin_read16(SDH_FIFO_CNT)
+#define bfin_write_SDH_FIFO_CNT(val)	bfin_write16(SDH_FIFO_CNT, val)
+#define bfin_read_SDH_FIFO()		bfin_read32(SDH_FIFO)
+#define bfin_write_SDH_FIFO(val)	bfin_write32(SDH_FIFO, val)
+#define bfin_read_SDH_E_STATUS()	bfin_read16(SDH_E_STATUS)
+#define bfin_write_SDH_E_STATUS(val)	bfin_write16(SDH_E_STATUS, val)
+#define bfin_read_SDH_E_MASK()		bfin_read16(SDH_E_MASK)
+#define bfin_write_SDH_E_MASK(val)	bfin_write16(SDH_E_MASK, val)
+#define bfin_read_SDH_CFG()		bfin_read16(SDH_CFG)
+#define bfin_write_SDH_CFG(val)		bfin_write16(SDH_CFG, val)
+#define bfin_read_SDH_RD_WAIT_EN()	bfin_read16(SDH_RD_WAIT_EN)
+#define bfin_write_SDH_RD_WAIT_EN(val)	bfin_write16(SDH_RD_WAIT_EN, val)
+#define bfin_read_SDH_PID0()		bfin_read16(SDH_PID0)
+#define bfin_write_SDH_PID0(val)	bfin_write16(SDH_PID0, val)
+#define bfin_read_SDH_PID1()		bfin_read16(SDH_PID1)
+#define bfin_write_SDH_PID1(val)	bfin_write16(SDH_PID1, val)
+#define bfin_read_SDH_PID2()		bfin_read16(SDH_PID2)
+#define bfin_write_SDH_PID2(val)	bfin_write16(SDH_PID2, val)
+#define bfin_read_SDH_PID3()		bfin_read16(SDH_PID3)
+#define bfin_write_SDH_PID3(val)	bfin_write16(SDH_PID3, val)
+#define bfin_read_SDH_PID4()		bfin_read16(SDH_PID4)
+#define bfin_write_SDH_PID4(val)	bfin_write16(SDH_PID4, val)
+#define bfin_read_SDH_PID5()		bfin_read16(SDH_PID5)
+#define bfin_write_SDH_PID5(val)	bfin_write16(SDH_PID5, val)
+#define bfin_read_SDH_PID6()		bfin_read16(SDH_PID6)
+#define bfin_write_SDH_PID6(val)	bfin_write16(SDH_PID6, val)
+#define bfin_read_SDH_PID7()		bfin_read16(SDH_PID7)
+#define bfin_write_SDH_PID7(val)	bfin_write16(SDH_PID7, val)
+
+/* USB Control Registers */
+
+#define bfin_read_USB_FADDR()		bfin_read16(USB_FADDR)
+#define bfin_write_USB_FADDR(val)	bfin_write16(USB_FADDR, val)
+#define bfin_read_USB_POWER()		bfin_read16(USB_POWER)
+#define bfin_write_USB_POWER(val)	bfin_write16(USB_POWER, val)
+#define bfin_read_USB_INTRTX()		bfin_read16(USB_INTRTX)
+#define bfin_write_USB_INTRTX(val)	bfin_write16(USB_INTRTX, val)
+#define bfin_read_USB_INTRRX()		bfin_read16(USB_INTRRX)
+#define bfin_write_USB_INTRRX(val)	bfin_write16(USB_INTRRX, val)
+#define bfin_read_USB_INTRTXE()		bfin_read16(USB_INTRTXE)
+#define bfin_write_USB_INTRTXE(val)	bfin_write16(USB_INTRTXE, val)
+#define bfin_read_USB_INTRRXE()		bfin_read16(USB_INTRRXE)
+#define bfin_write_USB_INTRRXE(val)	bfin_write16(USB_INTRRXE, val)
+#define bfin_read_USB_INTRUSB()		bfin_read16(USB_INTRUSB)
+#define bfin_write_USB_INTRUSB(val)	bfin_write16(USB_INTRUSB, val)
+#define bfin_read_USB_INTRUSBE()	bfin_read16(USB_INTRUSBE)
+#define bfin_write_USB_INTRUSBE(val)	bfin_write16(USB_INTRUSBE, val)
+#define bfin_read_USB_FRAME()		bfin_read16(USB_FRAME)
+#define bfin_write_USB_FRAME(val)	bfin_write16(USB_FRAME, val)
+#define bfin_read_USB_INDEX()		bfin_read16(USB_INDEX)
+#define bfin_write_USB_INDEX(val)	bfin_write16(USB_INDEX, val)
+#define bfin_read_USB_TESTMODE()	bfin_read16(USB_TESTMODE)
+#define bfin_write_USB_TESTMODE(val)	bfin_write16(USB_TESTMODE, val)
+#define bfin_read_USB_GLOBINTR()	bfin_read16(USB_GLOBINTR)
+#define bfin_write_USB_GLOBINTR(val)	bfin_write16(USB_GLOBINTR, val)
+#define bfin_read_USB_GLOBAL_CTL()	bfin_read16(USB_GLOBAL_CTL)
+#define bfin_write_USB_GLOBAL_CTL(val)	bfin_write16(USB_GLOBAL_CTL, val)
+
+/* USB Packet Control Registers */
+
+#define bfin_read_USB_TX_MAX_PACKET()		bfin_read16(USB_TX_MAX_PACKET)
+#define bfin_write_USB_TX_MAX_PACKET(val)	bfin_write16(USB_TX_MAX_PACKET, val)
+#define bfin_read_USB_CSR0()			bfin_read16(USB_CSR0)
+#define bfin_write_USB_CSR0(val)		bfin_write16(USB_CSR0, val)
+#define bfin_read_USB_TXCSR()			bfin_read16(USB_TXCSR)
+#define bfin_write_USB_TXCSR(val)		bfin_write16(USB_TXCSR, val)
+#define bfin_read_USB_RX_MAX_PACKET()		bfin_read16(USB_RX_MAX_PACKET)
+#define bfin_write_USB_RX_MAX_PACKET(val)	bfin_write16(USB_RX_MAX_PACKET, val)
+#define bfin_read_USB_RXCSR()			bfin_read16(USB_RXCSR)
+#define bfin_write_USB_RXCSR(val)		bfin_write16(USB_RXCSR, val)
+#define bfin_read_USB_COUNT0()			bfin_read16(USB_COUNT0)
+#define bfin_write_USB_COUNT0(val)		bfin_write16(USB_COUNT0, val)
+#define bfin_read_USB_RXCOUNT()			bfin_read16(USB_RXCOUNT)
+#define bfin_write_USB_RXCOUNT(val)		bfin_write16(USB_RXCOUNT, val)
+#define bfin_read_USB_TXTYPE()			bfin_read16(USB_TXTYPE)
+#define bfin_write_USB_TXTYPE(val)		bfin_write16(USB_TXTYPE, val)
+#define bfin_read_USB_NAKLIMIT0()		bfin_read16(USB_NAKLIMIT0)
+#define bfin_write_USB_NAKLIMIT0(val)		bfin_write16(USB_NAKLIMIT0, val)
+#define bfin_read_USB_TXINTERVAL()		bfin_read16(USB_TXINTERVAL)
+#define bfin_write_USB_TXINTERVAL(val)		bfin_write16(USB_TXINTERVAL, val)
+#define bfin_read_USB_RXTYPE()			bfin_read16(USB_RXTYPE)
+#define bfin_write_USB_RXTYPE(val)		bfin_write16(USB_RXTYPE, val)
+#define bfin_read_USB_RXINTERVAL()		bfin_read16(USB_RXINTERVAL)
+#define bfin_write_USB_RXINTERVAL(val)		bfin_write16(USB_RXINTERVAL, val)
+#define bfin_read_USB_TXCOUNT()			bfin_read16(USB_TXCOUNT)
+#define bfin_write_USB_TXCOUNT(val)		bfin_write16(USB_TXCOUNT, val)
+
+/* USB Endbfin_read_()oint FIFO Registers */
+
+#define bfin_read_USB_EP0_FIFO()		bfin_read16(USB_EP0_FIFO)
+#define bfin_write_USB_EP0_FIFO(val)		bfin_write16(USB_EP0_FIFO, val)
+#define bfin_read_USB_EP1_FIFO()		bfin_read16(USB_EP1_FIFO)
+#define bfin_write_USB_EP1_FIFO(val)		bfin_write16(USB_EP1_FIFO, val)
+#define bfin_read_USB_EP2_FIFO()		bfin_read16(USB_EP2_FIFO)
+#define bfin_write_USB_EP2_FIFO(val)		bfin_write16(USB_EP2_FIFO, val)
+#define bfin_read_USB_EP3_FIFO()		bfin_read16(USB_EP3_FIFO)
+#define bfin_write_USB_EP3_FIFO(val)		bfin_write16(USB_EP3_FIFO, val)
+#define bfin_read_USB_EP4_FIFO()		bfin_read16(USB_EP4_FIFO)
+#define bfin_write_USB_EP4_FIFO(val)		bfin_write16(USB_EP4_FIFO, val)
+#define bfin_read_USB_EP5_FIFO()		bfin_read16(USB_EP5_FIFO)
+#define bfin_write_USB_EP5_FIFO(val)		bfin_write16(USB_EP5_FIFO, val)
+#define bfin_read_USB_EP6_FIFO()		bfin_read16(USB_EP6_FIFO)
+#define bfin_write_USB_EP6_FIFO(val)		bfin_write16(USB_EP6_FIFO, val)
+#define bfin_read_USB_EP7_FIFO()		bfin_read16(USB_EP7_FIFO)
+#define bfin_write_USB_EP7_FIFO(val)		bfin_write16(USB_EP7_FIFO, val)
+
+/* USB OTG Control Registers */
+
+#define bfin_read_USB_OTG_DEV_CTL()		bfin_read16(USB_OTG_DEV_CTL)
+#define bfin_write_USB_OTG_DEV_CTL(val)		bfin_write16(USB_OTG_DEV_CTL, val)
+#define bfin_read_USB_OTG_VBUS_IRQ()		bfin_read16(USB_OTG_VBUS_IRQ)
+#define bfin_write_USB_OTG_VBUS_IRQ(val)	bfin_write16(USB_OTG_VBUS_IRQ, val)
+#define bfin_read_USB_OTG_VBUS_MASK()		bfin_read16(USB_OTG_VBUS_MASK)
+#define bfin_write_USB_OTG_VBUS_MASK(val)	bfin_write16(USB_OTG_VBUS_MASK, val)
+
+/* USB Phy Control Registers */
+
+#define bfin_read_USB_LINKINFO()		bfin_read16(USB_LINKINFO)
+#define bfin_write_USB_LINKINFO(val)		bfin_write16(USB_LINKINFO, val)
+#define bfin_read_USB_VPLEN()			bfin_read16(USB_VPLEN)
+#define bfin_write_USB_VPLEN(val)		bfin_write16(USB_VPLEN, val)
+#define bfin_read_USB_HS_EOF1()			bfin_read16(USB_HS_EOF1)
+#define bfin_write_USB_HS_EOF1(val)		bfin_write16(USB_HS_EOF1, val)
+#define bfin_read_USB_FS_EOF1()			bfin_read16(USB_FS_EOF1)
+#define bfin_write_USB_FS_EOF1(val)		bfin_write16(USB_FS_EOF1, val)
+#define bfin_read_USB_LS_EOF1()			bfin_read16(USB_LS_EOF1)
+#define bfin_write_USB_LS_EOF1(val)		bfin_write16(USB_LS_EOF1, val)
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CNTRL()		bfin_read16(USB_APHY_CNTRL)
+#define bfin_write_USB_APHY_CNTRL(val)		bfin_write16(USB_APHY_CNTRL, val)
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CALIB()		bfin_read16(USB_APHY_CALIB)
+#define bfin_write_USB_APHY_CALIB(val)		bfin_write16(USB_APHY_CALIB, val)
+#define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
+#define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
+
+#define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
+#define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
+#define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)
+#define bfin_write_USB_SRP_CLKDIV(val)		bfin_write16(USB_SRP_CLKDIV, val)
+
+/* USB Endbfin_read_()oint 0 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXMAXP()		bfin_read16(USB_EP_NI0_TXMAXP)
+#define bfin_write_USB_EP_NI0_TXMAXP(val)	bfin_write16(USB_EP_NI0_TXMAXP, val)
+#define bfin_read_USB_EP_NI0_TXCSR()		bfin_read16(USB_EP_NI0_TXCSR)
+#define bfin_write_USB_EP_NI0_TXCSR(val)	bfin_write16(USB_EP_NI0_TXCSR, val)
+#define bfin_read_USB_EP_NI0_RXMAXP()		bfin_read16(USB_EP_NI0_RXMAXP)
+#define bfin_write_USB_EP_NI0_RXMAXP(val)	bfin_write16(USB_EP_NI0_RXMAXP, val)
+#define bfin_read_USB_EP_NI0_RXCSR()		bfin_read16(USB_EP_NI0_RXCSR)
+#define bfin_write_USB_EP_NI0_RXCSR(val)	bfin_write16(USB_EP_NI0_RXCSR, val)
+#define bfin_read_USB_EP_NI0_RXCOUNT()		bfin_read16(USB_EP_NI0_RXCOUNT)
+#define bfin_write_USB_EP_NI0_RXCOUNT(val)	bfin_write16(USB_EP_NI0_RXCOUNT, val)
+#define bfin_read_USB_EP_NI0_TXTYPE()		bfin_read16(USB_EP_NI0_TXTYPE)
+#define bfin_write_USB_EP_NI0_TXTYPE(val)	bfin_write16(USB_EP_NI0_TXTYPE, val)
+#define bfin_read_USB_EP_NI0_TXINTERVAL()	bfin_read16(USB_EP_NI0_TXINTERVAL)
+#define bfin_write_USB_EP_NI0_TXINTERVAL(val)	bfin_write16(USB_EP_NI0_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI0_RXTYPE()		bfin_read16(USB_EP_NI0_RXTYPE)
+#define bfin_write_USB_EP_NI0_RXTYPE(val)	bfin_write16(USB_EP_NI0_RXTYPE, val)
+#define bfin_read_USB_EP_NI0_RXINTERVAL()	bfin_read16(USB_EP_NI0_RXINTERVAL)
+#define bfin_write_USB_EP_NI0_RXINTERVAL(val)	bfin_write16(USB_EP_NI0_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 1 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXCOUNT()		bfin_read16(USB_EP_NI0_TXCOUNT)
+#define bfin_write_USB_EP_NI0_TXCOUNT(val)	bfin_write16(USB_EP_NI0_TXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXMAXP()		bfin_read16(USB_EP_NI1_TXMAXP)
+#define bfin_write_USB_EP_NI1_TXMAXP(val)	bfin_write16(USB_EP_NI1_TXMAXP, val)
+#define bfin_read_USB_EP_NI1_TXCSR()		bfin_read16(USB_EP_NI1_TXCSR)
+#define bfin_write_USB_EP_NI1_TXCSR(val)	bfin_write16(USB_EP_NI1_TXCSR, val)
+#define bfin_read_USB_EP_NI1_RXMAXP()		bfin_read16(USB_EP_NI1_RXMAXP)
+#define bfin_write_USB_EP_NI1_RXMAXP(val)	bfin_write16(USB_EP_NI1_RXMAXP, val)
+#define bfin_read_USB_EP_NI1_RXCSR()		bfin_read16(USB_EP_NI1_RXCSR)
+#define bfin_write_USB_EP_NI1_RXCSR(val)	bfin_write16(USB_EP_NI1_RXCSR, val)
+#define bfin_read_USB_EP_NI1_RXCOUNT()		bfin_read16(USB_EP_NI1_RXCOUNT)
+#define bfin_write_USB_EP_NI1_RXCOUNT(val)	bfin_write16(USB_EP_NI1_RXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXTYPE()		bfin_read16(USB_EP_NI1_TXTYPE)
+#define bfin_write_USB_EP_NI1_TXTYPE(val)	bfin_write16(USB_EP_NI1_TXTYPE, val)
+#define bfin_read_USB_EP_NI1_TXINTERVAL()	bfin_read16(USB_EP_NI1_TXINTERVAL)
+#define bfin_write_USB_EP_NI1_TXINTERVAL(val)	bfin_write16(USB_EP_NI1_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI1_RXTYPE()		bfin_read16(USB_EP_NI1_RXTYPE)
+#define bfin_write_USB_EP_NI1_RXTYPE(val)	bfin_write16(USB_EP_NI1_RXTYPE, val)
+#define bfin_read_USB_EP_NI1_RXINTERVAL()	bfin_read16(USB_EP_NI1_RXINTERVAL)
+#define bfin_write_USB_EP_NI1_RXINTERVAL(val)	bfin_write16(USB_EP_NI1_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 2 Control Registers */
+
+#define bfin_read_USB_EP_NI1_TXCOUNT()		bfin_read16(USB_EP_NI1_TXCOUNT)
+#define bfin_write_USB_EP_NI1_TXCOUNT(val)	bfin_write16(USB_EP_NI1_TXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXMAXP()		bfin_read16(USB_EP_NI2_TXMAXP)
+#define bfin_write_USB_EP_NI2_TXMAXP(val)	bfin_write16(USB_EP_NI2_TXMAXP, val)
+#define bfin_read_USB_EP_NI2_TXCSR()		bfin_read16(USB_EP_NI2_TXCSR)
+#define bfin_write_USB_EP_NI2_TXCSR(val)	bfin_write16(USB_EP_NI2_TXCSR, val)
+#define bfin_read_USB_EP_NI2_RXMAXP()		bfin_read16(USB_EP_NI2_RXMAXP)
+#define bfin_write_USB_EP_NI2_RXMAXP(val)	bfin_write16(USB_EP_NI2_RXMAXP, val)
+#define bfin_read_USB_EP_NI2_RXCSR()		bfin_read16(USB_EP_NI2_RXCSR)
+#define bfin_write_USB_EP_NI2_RXCSR(val)	bfin_write16(USB_EP_NI2_RXCSR, val)
+#define bfin_read_USB_EP_NI2_RXCOUNT()		bfin_read16(USB_EP_NI2_RXCOUNT)
+#define bfin_write_USB_EP_NI2_RXCOUNT(val)	bfin_write16(USB_EP_NI2_RXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXTYPE()		bfin_read16(USB_EP_NI2_TXTYPE)
+#define bfin_write_USB_EP_NI2_TXTYPE(val)	bfin_write16(USB_EP_NI2_TXTYPE, val)
+#define bfin_read_USB_EP_NI2_TXINTERVAL()	bfin_read16(USB_EP_NI2_TXINTERVAL)
+#define bfin_write_USB_EP_NI2_TXINTERVAL(val)	bfin_write16(USB_EP_NI2_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI2_RXTYPE()		bfin_read16(USB_EP_NI2_RXTYPE)
+#define bfin_write_USB_EP_NI2_RXTYPE(val)	bfin_write16(USB_EP_NI2_RXTYPE, val)
+#define bfin_read_USB_EP_NI2_RXINTERVAL()	bfin_read16(USB_EP_NI2_RXINTERVAL)
+#define bfin_write_USB_EP_NI2_RXINTERVAL(val)	bfin_write16(USB_EP_NI2_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 3 Control Registers */
+
+#define bfin_read_USB_EP_NI2_TXCOUNT()		bfin_read16(USB_EP_NI2_TXCOUNT)
+#define bfin_write_USB_EP_NI2_TXCOUNT(val)	bfin_write16(USB_EP_NI2_TXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXMAXP()		bfin_read16(USB_EP_NI3_TXMAXP)
+#define bfin_write_USB_EP_NI3_TXMAXP(val)	bfin_write16(USB_EP_NI3_TXMAXP, val)
+#define bfin_read_USB_EP_NI3_TXCSR()		bfin_read16(USB_EP_NI3_TXCSR)
+#define bfin_write_USB_EP_NI3_TXCSR(val)	bfin_write16(USB_EP_NI3_TXCSR, val)
+#define bfin_read_USB_EP_NI3_RXMAXP()		bfin_read16(USB_EP_NI3_RXMAXP)
+#define bfin_write_USB_EP_NI3_RXMAXP(val)	bfin_write16(USB_EP_NI3_RXMAXP, val)
+#define bfin_read_USB_EP_NI3_RXCSR()		bfin_read16(USB_EP_NI3_RXCSR)
+#define bfin_write_USB_EP_NI3_RXCSR(val)	bfin_write16(USB_EP_NI3_RXCSR, val)
+#define bfin_read_USB_EP_NI3_RXCOUNT()		bfin_read16(USB_EP_NI3_RXCOUNT)
+#define bfin_write_USB_EP_NI3_RXCOUNT(val)	bfin_write16(USB_EP_NI3_RXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXTYPE()		bfin_read16(USB_EP_NI3_TXTYPE)
+#define bfin_write_USB_EP_NI3_TXTYPE(val)	bfin_write16(USB_EP_NI3_TXTYPE, val)
+#define bfin_read_USB_EP_NI3_TXINTERVAL()	bfin_read16(USB_EP_NI3_TXINTERVAL)
+#define bfin_write_USB_EP_NI3_TXINTERVAL(val)	bfin_write16(USB_EP_NI3_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI3_RXTYPE()		bfin_read16(USB_EP_NI3_RXTYPE)
+#define bfin_write_USB_EP_NI3_RXTYPE(val)	bfin_write16(USB_EP_NI3_RXTYPE, val)
+#define bfin_read_USB_EP_NI3_RXINTERVAL()	bfin_read16(USB_EP_NI3_RXINTERVAL)
+#define bfin_write_USB_EP_NI3_RXINTERVAL(val)	bfin_write16(USB_EP_NI3_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 4 Control Registers */
+
+#define bfin_read_USB_EP_NI3_TXCOUNT()		bfin_read16(USB_EP_NI3_TXCOUNT)
+#define bfin_write_USB_EP_NI3_TXCOUNT(val)	bfin_write16(USB_EP_NI3_TXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXMAXP()		bfin_read16(USB_EP_NI4_TXMAXP)
+#define bfin_write_USB_EP_NI4_TXMAXP(val)	bfin_write16(USB_EP_NI4_TXMAXP, val)
+#define bfin_read_USB_EP_NI4_TXCSR()		bfin_read16(USB_EP_NI4_TXCSR)
+#define bfin_write_USB_EP_NI4_TXCSR(val)	bfin_write16(USB_EP_NI4_TXCSR, val)
+#define bfin_read_USB_EP_NI4_RXMAXP()		bfin_read16(USB_EP_NI4_RXMAXP)
+#define bfin_write_USB_EP_NI4_RXMAXP(val)	bfin_write16(USB_EP_NI4_RXMAXP, val)
+#define bfin_read_USB_EP_NI4_RXCSR()		bfin_read16(USB_EP_NI4_RXCSR)
+#define bfin_write_USB_EP_NI4_RXCSR(val)	bfin_write16(USB_EP_NI4_RXCSR, val)
+#define bfin_read_USB_EP_NI4_RXCOUNT()		bfin_read16(USB_EP_NI4_RXCOUNT)
+#define bfin_write_USB_EP_NI4_RXCOUNT(val)	bfin_write16(USB_EP_NI4_RXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXTYPE()		bfin_read16(USB_EP_NI4_TXTYPE)
+#define bfin_write_USB_EP_NI4_TXTYPE(val)	bfin_write16(USB_EP_NI4_TXTYPE, val)
+#define bfin_read_USB_EP_NI4_TXINTERVAL()	bfin_read16(USB_EP_NI4_TXINTERVAL)
+#define bfin_write_USB_EP_NI4_TXINTERVAL(val)	bfin_write16(USB_EP_NI4_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI4_RXTYPE()		bfin_read16(USB_EP_NI4_RXTYPE)
+#define bfin_write_USB_EP_NI4_RXTYPE(val)	bfin_write16(USB_EP_NI4_RXTYPE, val)
+#define bfin_read_USB_EP_NI4_RXINTERVAL()	bfin_read16(USB_EP_NI4_RXINTERVAL)
+#define bfin_write_USB_EP_NI4_RXINTERVAL(val)	bfin_write16(USB_EP_NI4_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 5 Control Registers */
+
+#define bfin_read_USB_EP_NI4_TXCOUNT()		bfin_read16(USB_EP_NI4_TXCOUNT)
+#define bfin_write_USB_EP_NI4_TXCOUNT(val)	bfin_write16(USB_EP_NI4_TXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXMAXP()		bfin_read16(USB_EP_NI5_TXMAXP)
+#define bfin_write_USB_EP_NI5_TXMAXP(val)	bfin_write16(USB_EP_NI5_TXMAXP, val)
+#define bfin_read_USB_EP_NI5_TXCSR()		bfin_read16(USB_EP_NI5_TXCSR)
+#define bfin_write_USB_EP_NI5_TXCSR(val)	bfin_write16(USB_EP_NI5_TXCSR, val)
+#define bfin_read_USB_EP_NI5_RXMAXP()		bfin_read16(USB_EP_NI5_RXMAXP)
+#define bfin_write_USB_EP_NI5_RXMAXP(val)	bfin_write16(USB_EP_NI5_RXMAXP, val)
+#define bfin_read_USB_EP_NI5_RXCSR()		bfin_read16(USB_EP_NI5_RXCSR)
+#define bfin_write_USB_EP_NI5_RXCSR(val)	bfin_write16(USB_EP_NI5_RXCSR, val)
+#define bfin_read_USB_EP_NI5_RXCOUNT()		bfin_read16(USB_EP_NI5_RXCOUNT)
+#define bfin_write_USB_EP_NI5_RXCOUNT(val)	bfin_write16(USB_EP_NI5_RXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXTYPE()		bfin_read16(USB_EP_NI5_TXTYPE)
+#define bfin_write_USB_EP_NI5_TXTYPE(val)	bfin_write16(USB_EP_NI5_TXTYPE, val)
+#define bfin_read_USB_EP_NI5_TXINTERVAL()	bfin_read16(USB_EP_NI5_TXINTERVAL)
+#define bfin_write_USB_EP_NI5_TXINTERVAL(val)	bfin_write16(USB_EP_NI5_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI5_RXTYPE()		bfin_read16(USB_EP_NI5_RXTYPE)
+#define bfin_write_USB_EP_NI5_RXTYPE(val)	bfin_write16(USB_EP_NI5_RXTYPE, val)
+#define bfin_read_USB_EP_NI5_RXINTERVAL()	bfin_read16(USB_EP_NI5_RXINTERVAL)
+#define bfin_write_USB_EP_NI5_RXINTERVAL(val)	bfin_write16(USB_EP_NI5_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 6 Control Registers */
+
+#define bfin_read_USB_EP_NI5_TXCOUNT()		bfin_read16(USB_EP_NI5_TXCOUNT)
+#define bfin_write_USB_EP_NI5_TXCOUNT(val)	bfin_write16(USB_EP_NI5_TXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXMAXP()		bfin_read16(USB_EP_NI6_TXMAXP)
+#define bfin_write_USB_EP_NI6_TXMAXP(val)	bfin_write16(USB_EP_NI6_TXMAXP, val)
+#define bfin_read_USB_EP_NI6_TXCSR()		bfin_read16(USB_EP_NI6_TXCSR)
+#define bfin_write_USB_EP_NI6_TXCSR(val)	bfin_write16(USB_EP_NI6_TXCSR, val)
+#define bfin_read_USB_EP_NI6_RXMAXP()		bfin_read16(USB_EP_NI6_RXMAXP)
+#define bfin_write_USB_EP_NI6_RXMAXP(val)	bfin_write16(USB_EP_NI6_RXMAXP, val)
+#define bfin_read_USB_EP_NI6_RXCSR()		bfin_read16(USB_EP_NI6_RXCSR)
+#define bfin_write_USB_EP_NI6_RXCSR(val)	bfin_write16(USB_EP_NI6_RXCSR, val)
+#define bfin_read_USB_EP_NI6_RXCOUNT()		bfin_read16(USB_EP_NI6_RXCOUNT)
+#define bfin_write_USB_EP_NI6_RXCOUNT(val)	bfin_write16(USB_EP_NI6_RXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXTYPE()		bfin_read16(USB_EP_NI6_TXTYPE)
+#define bfin_write_USB_EP_NI6_TXTYPE(val)	bfin_write16(USB_EP_NI6_TXTYPE, val)
+#define bfin_read_USB_EP_NI6_TXINTERVAL()	bfin_read16(USB_EP_NI6_TXINTERVAL)
+#define bfin_write_USB_EP_NI6_TXINTERVAL(val)	bfin_write16(USB_EP_NI6_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI6_RXTYPE()		bfin_read16(USB_EP_NI6_RXTYPE)
+#define bfin_write_USB_EP_NI6_RXTYPE(val)	bfin_write16(USB_EP_NI6_RXTYPE, val)
+#define bfin_read_USB_EP_NI6_RXINTERVAL()	bfin_read16(USB_EP_NI6_RXINTERVAL)
+#define bfin_write_USB_EP_NI6_RXINTERVAL(val)	bfin_write16(USB_EP_NI6_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 7 Control Registers */
+
+#define bfin_read_USB_EP_NI6_TXCOUNT()		bfin_read16(USB_EP_NI6_TXCOUNT)
+#define bfin_write_USB_EP_NI6_TXCOUNT(val)	bfin_write16(USB_EP_NI6_TXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXMAXP()		bfin_read16(USB_EP_NI7_TXMAXP)
+#define bfin_write_USB_EP_NI7_TXMAXP(val)	bfin_write16(USB_EP_NI7_TXMAXP, val)
+#define bfin_read_USB_EP_NI7_TXCSR()		bfin_read16(USB_EP_NI7_TXCSR)
+#define bfin_write_USB_EP_NI7_TXCSR(val)	bfin_write16(USB_EP_NI7_TXCSR, val)
+#define bfin_read_USB_EP_NI7_RXMAXP()		bfin_read16(USB_EP_NI7_RXMAXP)
+#define bfin_write_USB_EP_NI7_RXMAXP(val)	bfin_write16(USB_EP_NI7_RXMAXP, val)
+#define bfin_read_USB_EP_NI7_RXCSR()		bfin_read16(USB_EP_NI7_RXCSR)
+#define bfin_write_USB_EP_NI7_RXCSR(val)	bfin_write16(USB_EP_NI7_RXCSR, val)
+#define bfin_read_USB_EP_NI7_RXCOUNT()		bfin_read16(USB_EP_NI7_RXCOUNT)
+#define bfin_write_USB_EP_NI7_RXCOUNT(val)	bfin_write16(USB_EP_NI7_RXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXTYPE()		bfin_read16(USB_EP_NI7_TXTYPE)
+#define bfin_write_USB_EP_NI7_TXTYPE(val)	bfin_write16(USB_EP_NI7_TXTYPE, val)
+#define bfin_read_USB_EP_NI7_TXINTERVAL()	bfin_read16(USB_EP_NI7_TXINTERVAL)
+#define bfin_write_USB_EP_NI7_TXINTERVAL(val)	bfin_write16(USB_EP_NI7_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_RXTYPE()		bfin_read16(USB_EP_NI7_RXTYPE)
+#define bfin_write_USB_EP_NI7_RXTYPE(val)	bfin_write16(USB_EP_NI7_RXTYPE, val)
+#define bfin_read_USB_EP_NI7_RXINTERVAL()	bfin_read16(USB_EP_NI7_RXINTERVAL)
+#define bfin_write_USB_EP_NI7_RXINTERVAL(val)	bfin_write16(USB_EP_NI7_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_TXCOUNT()		bfin_read16(USB_EP_NI7_TXCOUNT)
+#define bfin_write_USB_EP_NI7_TXCOUNT(val)	bfin_write16(USB_EP_NI7_TXCOUNT, val)
+#define bfin_read_USB_DMA_INTERRUPT()		bfin_read16(USB_DMA_INTERRUPT)
+#define bfin_write_USB_DMA_INTERRUPT(val)	bfin_write16(USB_DMA_INTERRUPT, val)
+
+/* USB Channel 0 Config Registers */
+
+#define bfin_read_USB_DMA0CONTROL()		bfin_read16(USB_DMA0CONTROL)
+#define bfin_write_USB_DMA0CONTROL(val)		bfin_write16(USB_DMA0CONTROL, val)
+#define bfin_read_USB_DMA0ADDRLOW()		bfin_read16(USB_DMA0ADDRLOW)
+#define bfin_write_USB_DMA0ADDRLOW(val)		bfin_write16(USB_DMA0ADDRLOW, val)
+#define bfin_read_USB_DMA0ADDRHIGH()		bfin_read16(USB_DMA0ADDRHIGH)
+#define bfin_write_USB_DMA0ADDRHIGH(val)	bfin_write16(USB_DMA0ADDRHIGH, val)
+#define bfin_read_USB_DMA0COUNTLOW()		bfin_read16(USB_DMA0COUNTLOW)
+#define bfin_write_USB_DMA0COUNTLOW(val)	bfin_write16(USB_DMA0COUNTLOW, val)
+#define bfin_read_USB_DMA0COUNTHIGH()		bfin_read16(USB_DMA0COUNTHIGH)
+#define bfin_write_USB_DMA0COUNTHIGH(val)	bfin_write16(USB_DMA0COUNTHIGH, val)
+
+/* USB Channel 1 Config Registers */
+
+#define bfin_read_USB_DMA1CONTROL()		bfin_read16(USB_DMA1CONTROL)
+#define bfin_write_USB_DMA1CONTROL(val)		bfin_write16(USB_DMA1CONTROL, val)
+#define bfin_read_USB_DMA1ADDRLOW()		bfin_read16(USB_DMA1ADDRLOW)
+#define bfin_write_USB_DMA1ADDRLOW(val)		bfin_write16(USB_DMA1ADDRLOW, val)
+#define bfin_read_USB_DMA1ADDRHIGH()		bfin_read16(USB_DMA1ADDRHIGH)
+#define bfin_write_USB_DMA1ADDRHIGH(val)	bfin_write16(USB_DMA1ADDRHIGH, val)
+#define bfin_read_USB_DMA1COUNTLOW()		bfin_read16(USB_DMA1COUNTLOW)
+#define bfin_write_USB_DMA1COUNTLOW(val)	bfin_write16(USB_DMA1COUNTLOW, val)
+#define bfin_read_USB_DMA1COUNTHIGH()		bfin_read16(USB_DMA1COUNTHIGH)
+#define bfin_write_USB_DMA1COUNTHIGH(val)	bfin_write16(USB_DMA1COUNTHIGH, val)
+
+/* USB Channel 2 Config Registers */
+
+#define bfin_read_USB_DMA2CONTROL()		bfin_read16(USB_DMA2CONTROL)
+#define bfin_write_USB_DMA2CONTROL(val)		bfin_write16(USB_DMA2CONTROL, val)
+#define bfin_read_USB_DMA2ADDRLOW()		bfin_read16(USB_DMA2ADDRLOW)
+#define bfin_write_USB_DMA2ADDRLOW(val)		bfin_write16(USB_DMA2ADDRLOW, val)
+#define bfin_read_USB_DMA2ADDRHIGH()		bfin_read16(USB_DMA2ADDRHIGH)
+#define bfin_write_USB_DMA2ADDRHIGH(val)	bfin_write16(USB_DMA2ADDRHIGH, val)
+#define bfin_read_USB_DMA2COUNTLOW()		bfin_read16(USB_DMA2COUNTLOW)
+#define bfin_write_USB_DMA2COUNTLOW(val)	bfin_write16(USB_DMA2COUNTLOW, val)
+#define bfin_read_USB_DMA2COUNTHIGH()		bfin_read16(USB_DMA2COUNTHIGH)
+#define bfin_write_USB_DMA2COUNTHIGH(val)	bfin_write16(USB_DMA2COUNTHIGH, val)
+
+/* USB Channel 3 Config Registers */
+
+#define bfin_read_USB_DMA3CONTROL()		bfin_read16(USB_DMA3CONTROL)
+#define bfin_write_USB_DMA3CONTROL(val)		bfin_write16(USB_DMA3CONTROL, val)
+#define bfin_read_USB_DMA3ADDRLOW()		bfin_read16(USB_DMA3ADDRLOW)
+#define bfin_write_USB_DMA3ADDRLOW(val)		bfin_write16(USB_DMA3ADDRLOW, val)
+#define bfin_read_USB_DMA3ADDRHIGH()		bfin_read16(USB_DMA3ADDRHIGH)
+#define bfin_write_USB_DMA3ADDRHIGH(val)	bfin_write16(USB_DMA3ADDRHIGH, val)
+#define bfin_read_USB_DMA3COUNTLOW()		bfin_read16(USB_DMA3COUNTLOW)
+#define bfin_write_USB_DMA3COUNTLOW(val)	bfin_write16(USB_DMA3COUNTLOW, val)
+#define bfin_read_USB_DMA3COUNTHIGH()		bfin_read16(USB_DMA3COUNTHIGH)
+#define bfin_write_USB_DMA3COUNTHIGH(val)	bfin_write16(USB_DMA3COUNTHIGH, val)
+
+/* USB Channel 4 Config Registers */
+
+#define bfin_read_USB_DMA4CONTROL()		bfin_read16(USB_DMA4CONTROL)
+#define bfin_write_USB_DMA4CONTROL(val)		bfin_write16(USB_DMA4CONTROL, val)
+#define bfin_read_USB_DMA4ADDRLOW()		bfin_read16(USB_DMA4ADDRLOW)
+#define bfin_write_USB_DMA4ADDRLOW(val)		bfin_write16(USB_DMA4ADDRLOW, val)
+#define bfin_read_USB_DMA4ADDRHIGH()		bfin_read16(USB_DMA4ADDRHIGH)
+#define bfin_write_USB_DMA4ADDRHIGH(val)	bfin_write16(USB_DMA4ADDRHIGH, val)
+#define bfin_read_USB_DMA4COUNTLOW()		bfin_read16(USB_DMA4COUNTLOW)
+#define bfin_write_USB_DMA4COUNTLOW(val)	bfin_write16(USB_DMA4COUNTLOW, val)
+#define bfin_read_USB_DMA4COUNTHIGH()		bfin_read16(USB_DMA4COUNTHIGH)
+#define bfin_write_USB_DMA4COUNTHIGH(val)	bfin_write16(USB_DMA4COUNTHIGH, val)
+
+/* USB Channel 5 Config Registers */
+
+#define bfin_read_USB_DMA5CONTROL()		bfin_read16(USB_DMA5CONTROL)
+#define bfin_write_USB_DMA5CONTROL(val)		bfin_write16(USB_DMA5CONTROL, val)
+#define bfin_read_USB_DMA5ADDRLOW()		bfin_read16(USB_DMA5ADDRLOW)
+#define bfin_write_USB_DMA5ADDRLOW(val)		bfin_write16(USB_DMA5ADDRLOW, val)
+#define bfin_read_USB_DMA5ADDRHIGH()		bfin_read16(USB_DMA5ADDRHIGH)
+#define bfin_write_USB_DMA5ADDRHIGH(val)	bfin_write16(USB_DMA5ADDRHIGH, val)
+#define bfin_read_USB_DMA5COUNTLOW()		bfin_read16(USB_DMA5COUNTLOW)
+#define bfin_write_USB_DMA5COUNTLOW(val)	bfin_write16(USB_DMA5COUNTLOW, val)
+#define bfin_read_USB_DMA5COUNTHIGH()		bfin_read16(USB_DMA5COUNTHIGH)
+#define bfin_write_USB_DMA5COUNTHIGH(val)	bfin_write16(USB_DMA5COUNTHIGH, val)
+
+/* USB Channel 6 Config Registers */
+
+#define bfin_read_USB_DMA6CONTROL()		bfin_read16(USB_DMA6CONTROL)
+#define bfin_write_USB_DMA6CONTROL(val)		bfin_write16(USB_DMA6CONTROL, val)
+#define bfin_read_USB_DMA6ADDRLOW()		bfin_read16(USB_DMA6ADDRLOW)
+#define bfin_write_USB_DMA6ADDRLOW(val)		bfin_write16(USB_DMA6ADDRLOW, val)
+#define bfin_read_USB_DMA6ADDRHIGH()		bfin_read16(USB_DMA6ADDRHIGH)
+#define bfin_write_USB_DMA6ADDRHIGH(val)	bfin_write16(USB_DMA6ADDRHIGH, val)
+#define bfin_read_USB_DMA6COUNTLOW()		bfin_read16(USB_DMA6COUNTLOW)
+#define bfin_write_USB_DMA6COUNTLOW(val)	bfin_write16(USB_DMA6COUNTLOW, val)
+#define bfin_read_USB_DMA6COUNTHIGH()		bfin_read16(USB_DMA6COUNTHIGH)
+#define bfin_write_USB_DMA6COUNTHIGH(val)	bfin_write16(USB_DMA6COUNTHIGH, val)
+
+/* USB Channel 7 Config Registers */
+
+#define bfin_read_USB_DMA7CONTROL()		bfin_read16(USB_DMA7CONTROL)
+#define bfin_write_USB_DMA7CONTROL(val)		bfin_write16(USB_DMA7CONTROL, val)
+#define bfin_read_USB_DMA7ADDRLOW()		bfin_read16(USB_DMA7ADDRLOW)
+#define bfin_write_USB_DMA7ADDRLOW(val)		bfin_write16(USB_DMA7ADDRLOW, val)
+#define bfin_read_USB_DMA7ADDRHIGH()		bfin_read16(USB_DMA7ADDRHIGH)
+#define bfin_write_USB_DMA7ADDRHIGH(val)	bfin_write16(USB_DMA7ADDRHIGH, val)
+#define bfin_read_USB_DMA7COUNTLOW()		bfin_read16(USB_DMA7COUNTLOW)
+#define bfin_write_USB_DMA7COUNTLOW(val)	bfin_write16(USB_DMA7COUNTLOW, val)
+#define bfin_read_USB_DMA7COUNTHIGH()		bfin_read16(USB_DMA7COUNTHIGH)
+#define bfin_write_USB_DMA7COUNTHIGH(val)	bfin_write16(USB_DMA7COUNTHIGH, val)
+
+/* Keybfin_read_()ad Registers */
+
+#define bfin_read_KPAD_CTL()			bfin_read16(KPAD_CTL)
+#define bfin_write_KPAD_CTL(val)		bfin_write16(KPAD_CTL, val)
+#define bfin_read_KPAD_PRESCALE()		bfin_read16(KPAD_PRESCALE)
+#define bfin_write_KPAD_PRESCALE(val)		bfin_write16(KPAD_PRESCALE, val)
+#define bfin_read_KPAD_MSEL()			bfin_read16(KPAD_MSEL)
+#define bfin_write_KPAD_MSEL(val)		bfin_write16(KPAD_MSEL, val)
+#define bfin_read_KPAD_ROWCOL()			bfin_read16(KPAD_ROWCOL)
+#define bfin_write_KPAD_ROWCOL(val)		bfin_write16(KPAD_ROWCOL, val)
+#define bfin_read_KPAD_STAT()			bfin_read16(KPAD_STAT)
+#define bfin_write_KPAD_STAT(val)		bfin_write16(KPAD_STAT, val)
+#define bfin_read_KPAD_SOFTEVAL()		bfin_read16(KPAD_SOFTEVAL)
+#define bfin_write_KPAD_SOFTEVAL(val)		bfin_write16(KPAD_SOFTEVAL, val)
+
+#endif /* _CDEF_BF542_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF544.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF544.h
new file mode 100644
index 0000000..33ec810
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF544.h
@@ -0,0 +1,913 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _CDEF_BF544_H
+#define _CDEF_BF544_H
+
+/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
+#include "cdefBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF544 that are not in the common header */
+
+/* Timer Registers */
+
+#define bfin_read_TIMER8_CONFIG()		bfin_read16(TIMER8_CONFIG)
+#define bfin_write_TIMER8_CONFIG(val)		bfin_write16(TIMER8_CONFIG, val)
+#define bfin_read_TIMER8_COUNTER()		bfin_read32(TIMER8_COUNTER)
+#define bfin_write_TIMER8_COUNTER(val)		bfin_write32(TIMER8_COUNTER, val)
+#define bfin_read_TIMER8_PERIOD()		bfin_read32(TIMER8_PERIOD)
+#define bfin_write_TIMER8_PERIOD(val)		bfin_write32(TIMER8_PERIOD, val)
+#define bfin_read_TIMER8_WIDTH()		bfin_read32(TIMER8_WIDTH)
+#define bfin_write_TIMER8_WIDTH(val)		bfin_write32(TIMER8_WIDTH, val)
+#define bfin_read_TIMER9_CONFIG()		bfin_read16(TIMER9_CONFIG)
+#define bfin_write_TIMER9_CONFIG(val)		bfin_write16(TIMER9_CONFIG, val)
+#define bfin_read_TIMER9_COUNTER()		bfin_read32(TIMER9_COUNTER)
+#define bfin_write_TIMER9_COUNTER(val)		bfin_write32(TIMER9_COUNTER, val)
+#define bfin_read_TIMER9_PERIOD()		bfin_read32(TIMER9_PERIOD)
+#define bfin_write_TIMER9_PERIOD(val)		bfin_write32(TIMER9_PERIOD, val)
+#define bfin_read_TIMER9_WIDTH()		bfin_read32(TIMER9_WIDTH)
+#define bfin_write_TIMER9_WIDTH(val)		bfin_write32(TIMER9_WIDTH, val)
+#define bfin_read_TIMER10_CONFIG()		bfin_read16(TIMER10_CONFIG)
+#define bfin_write_TIMER10_CONFIG(val)		bfin_write16(TIMER10_CONFIG, val)
+#define bfin_read_TIMER10_COUNTER()		bfin_read32(TIMER10_COUNTER)
+#define bfin_write_TIMER10_COUNTER(val)		bfin_write32(TIMER10_COUNTER, val)
+#define bfin_read_TIMER10_PERIOD()		bfin_read32(TIMER10_PERIOD)
+#define bfin_write_TIMER10_PERIOD(val)		bfin_write32(TIMER10_PERIOD, val)
+#define bfin_read_TIMER10_WIDTH()		bfin_read32(TIMER10_WIDTH)
+#define bfin_write_TIMER10_WIDTH(val)		bfin_write32(TIMER10_WIDTH, val)
+
+/* Timer Groubfin_read_() of 3 */
+
+#define bfin_read_TIMER_ENABLE1()		bfin_read16(TIMER_ENABLE1)
+#define bfin_write_TIMER_ENABLE1(val)		bfin_write16(TIMER_ENABLE1, val)
+#define bfin_read_TIMER_DISABLE1()		bfin_read16(TIMER_DISABLE1)
+#define bfin_write_TIMER_DISABLE1(val)		bfin_write16(TIMER_DISABLE1, val)
+#define bfin_read_TIMER_STATUS1()		bfin_read32(TIMER_STATUS1)
+#define bfin_write_TIMER_STATUS1(val)		bfin_write32(TIMER_STATUS1, val)
+
+/* EPPI0 Registers */
+
+#define bfin_read_EPPI0_STATUS()		bfin_read16(EPPI0_STATUS)
+#define bfin_write_EPPI0_STATUS(val)		bfin_write16(EPPI0_STATUS, val)
+#define bfin_read_EPPI0_HCOUNT()		bfin_read16(EPPI0_HCOUNT)
+#define bfin_write_EPPI0_HCOUNT(val)		bfin_write16(EPPI0_HCOUNT, val)
+#define bfin_read_EPPI0_HDELAY()		bfin_read16(EPPI0_HDELAY)
+#define bfin_write_EPPI0_HDELAY(val)		bfin_write16(EPPI0_HDELAY, val)
+#define bfin_read_EPPI0_VCOUNT()		bfin_read16(EPPI0_VCOUNT)
+#define bfin_write_EPPI0_VCOUNT(val)		bfin_write16(EPPI0_VCOUNT, val)
+#define bfin_read_EPPI0_VDELAY()		bfin_read16(EPPI0_VDELAY)
+#define bfin_write_EPPI0_VDELAY(val)		bfin_write16(EPPI0_VDELAY, val)
+#define bfin_read_EPPI0_FRAME()			bfin_read16(EPPI0_FRAME)
+#define bfin_write_EPPI0_FRAME(val)		bfin_write16(EPPI0_FRAME, val)
+#define bfin_read_EPPI0_LINE()			bfin_read16(EPPI0_LINE)
+#define bfin_write_EPPI0_LINE(val)		bfin_write16(EPPI0_LINE, val)
+#define bfin_read_EPPI0_CLKDIV()		bfin_read16(EPPI0_CLKDIV)
+#define bfin_write_EPPI0_CLKDIV(val)		bfin_write16(EPPI0_CLKDIV, val)
+#define bfin_read_EPPI0_CONTROL()		bfin_read32(EPPI0_CONTROL)
+#define bfin_write_EPPI0_CONTROL(val)		bfin_write32(EPPI0_CONTROL, val)
+#define bfin_read_EPPI0_FS1W_HBL()		bfin_read32(EPPI0_FS1W_HBL)
+#define bfin_write_EPPI0_FS1W_HBL(val)		bfin_write32(EPPI0_FS1W_HBL, val)
+#define bfin_read_EPPI0_FS1P_AVPL()		bfin_read32(EPPI0_FS1P_AVPL)
+#define bfin_write_EPPI0_FS1P_AVPL(val)		bfin_write32(EPPI0_FS1P_AVPL, val)
+#define bfin_read_EPPI0_FS2W_LVB()		bfin_read32(EPPI0_FS2W_LVB)
+#define bfin_write_EPPI0_FS2W_LVB(val)		bfin_write32(EPPI0_FS2W_LVB, val)
+#define bfin_read_EPPI0_FS2P_LAVF()		bfin_read32(EPPI0_FS2P_LAVF)
+#define bfin_write_EPPI0_FS2P_LAVF(val)		bfin_write32(EPPI0_FS2P_LAVF, val)
+#define bfin_read_EPPI0_CLIP()			bfin_read32(EPPI0_CLIP)
+#define bfin_write_EPPI0_CLIP(val)		bfin_write32(EPPI0_CLIP, val)
+
+/* Two Wire Interface Registers (TWI1) */
+
+/* CAN Controller 1 Config 1 Registers */
+
+#define bfin_read_CAN1_MC1()		bfin_read16(CAN1_MC1)
+#define bfin_write_CAN1_MC1(val)	bfin_write16(CAN1_MC1, val)
+#define bfin_read_CAN1_MD1()		bfin_read16(CAN1_MD1)
+#define bfin_write_CAN1_MD1(val)	bfin_write16(CAN1_MD1, val)
+#define bfin_read_CAN1_TRS1()		bfin_read16(CAN1_TRS1)
+#define bfin_write_CAN1_TRS1(val)	bfin_write16(CAN1_TRS1, val)
+#define bfin_read_CAN1_TRR1()		bfin_read16(CAN1_TRR1)
+#define bfin_write_CAN1_TRR1(val)	bfin_write16(CAN1_TRR1, val)
+#define bfin_read_CAN1_TA1()		bfin_read16(CAN1_TA1)
+#define bfin_write_CAN1_TA1(val)	bfin_write16(CAN1_TA1, val)
+#define bfin_read_CAN1_AA1()		bfin_read16(CAN1_AA1)
+#define bfin_write_CAN1_AA1(val)	bfin_write16(CAN1_AA1, val)
+#define bfin_read_CAN1_RMP1()		bfin_read16(CAN1_RMP1)
+#define bfin_write_CAN1_RMP1(val)	bfin_write16(CAN1_RMP1, val)
+#define bfin_read_CAN1_RML1()		bfin_read16(CAN1_RML1)
+#define bfin_write_CAN1_RML1(val)	bfin_write16(CAN1_RML1, val)
+#define bfin_read_CAN1_MBTIF1()		bfin_read16(CAN1_MBTIF1)
+#define bfin_write_CAN1_MBTIF1(val)	bfin_write16(CAN1_MBTIF1, val)
+#define bfin_read_CAN1_MBRIF1()		bfin_read16(CAN1_MBRIF1)
+#define bfin_write_CAN1_MBRIF1(val)	bfin_write16(CAN1_MBRIF1, val)
+#define bfin_read_CAN1_MBIM1()		bfin_read16(CAN1_MBIM1)
+#define bfin_write_CAN1_MBIM1(val)	bfin_write16(CAN1_MBIM1, val)
+#define bfin_read_CAN1_RFH1()		bfin_read16(CAN1_RFH1)
+#define bfin_write_CAN1_RFH1(val)	bfin_write16(CAN1_RFH1, val)
+#define bfin_read_CAN1_OPSS1()		bfin_read16(CAN1_OPSS1)
+#define bfin_write_CAN1_OPSS1(val)	bfin_write16(CAN1_OPSS1, val)
+
+/* CAN Controller 1 Config 2 Registers */
+
+#define bfin_read_CAN1_MC2()		bfin_read16(CAN1_MC2)
+#define bfin_write_CAN1_MC2(val)	bfin_write16(CAN1_MC2, val)
+#define bfin_read_CAN1_MD2()		bfin_read16(CAN1_MD2)
+#define bfin_write_CAN1_MD2(val)	bfin_write16(CAN1_MD2, val)
+#define bfin_read_CAN1_TRS2()		bfin_read16(CAN1_TRS2)
+#define bfin_write_CAN1_TRS2(val)	bfin_write16(CAN1_TRS2, val)
+#define bfin_read_CAN1_TRR2()		bfin_read16(CAN1_TRR2)
+#define bfin_write_CAN1_TRR2(val)	bfin_write16(CAN1_TRR2, val)
+#define bfin_read_CAN1_TA2()		bfin_read16(CAN1_TA2)
+#define bfin_write_CAN1_TA2(val)	bfin_write16(CAN1_TA2, val)
+#define bfin_read_CAN1_AA2()		bfin_read16(CAN1_AA2)
+#define bfin_write_CAN1_AA2(val)	bfin_write16(CAN1_AA2, val)
+#define bfin_read_CAN1_RMP2()		bfin_read16(CAN1_RMP2)
+#define bfin_write_CAN1_RMP2(val)	bfin_write16(CAN1_RMP2, val)
+#define bfin_read_CAN1_RML2()		bfin_read16(CAN1_RML2)
+#define bfin_write_CAN1_RML2(val)	bfin_write16(CAN1_RML2, val)
+#define bfin_read_CAN1_MBTIF2()		bfin_read16(CAN1_MBTIF2)
+#define bfin_write_CAN1_MBTIF2(val)	bfin_write16(CAN1_MBTIF2, val)
+#define bfin_read_CAN1_MBRIF2()		bfin_read16(CAN1_MBRIF2)
+#define bfin_write_CAN1_MBRIF2(val)	bfin_write16(CAN1_MBRIF2, val)
+#define bfin_read_CAN1_MBIM2()		bfin_read16(CAN1_MBIM2)
+#define bfin_write_CAN1_MBIM2(val)	bfin_write16(CAN1_MBIM2, val)
+#define bfin_read_CAN1_RFH2()		bfin_read16(CAN1_RFH2)
+#define bfin_write_CAN1_RFH2(val)	bfin_write16(CAN1_RFH2, val)
+#define bfin_read_CAN1_OPSS2()		bfin_read16(CAN1_OPSS2)
+#define bfin_write_CAN1_OPSS2(val)	bfin_write16(CAN1_OPSS2, val)
+
+/* CAN Controller 1 Clock/Interrubfin_read_()t/Counter Registers */
+
+#define bfin_read_CAN1_CLOCK()		bfin_read16(CAN1_CLOCK)
+#define bfin_write_CAN1_CLOCK(val)	bfin_write16(CAN1_CLOCK, val)
+#define bfin_read_CAN1_TIMING()		bfin_read16(CAN1_TIMING)
+#define bfin_write_CAN1_TIMING(val)	bfin_write16(CAN1_TIMING, val)
+#define bfin_read_CAN1_DEBUG()		bfin_read16(CAN1_DEBUG)
+#define bfin_write_CAN1_DEBUG(val)	bfin_write16(CAN1_DEBUG, val)
+#define bfin_read_CAN1_STATUS()		bfin_read16(CAN1_STATUS)
+#define bfin_write_CAN1_STATUS(val)	bfin_write16(CAN1_STATUS, val)
+#define bfin_read_CAN1_CEC()		bfin_read16(CAN1_CEC)
+#define bfin_write_CAN1_CEC(val)	bfin_write16(CAN1_CEC, val)
+#define bfin_read_CAN1_GIS()		bfin_read16(CAN1_GIS)
+#define bfin_write_CAN1_GIS(val)	bfin_write16(CAN1_GIS, val)
+#define bfin_read_CAN1_GIM()		bfin_read16(CAN1_GIM)
+#define bfin_write_CAN1_GIM(val)	bfin_write16(CAN1_GIM, val)
+#define bfin_read_CAN1_GIF()		bfin_read16(CAN1_GIF)
+#define bfin_write_CAN1_GIF(val)	bfin_write16(CAN1_GIF, val)
+#define bfin_read_CAN1_CONTROL()	bfin_read16(CAN1_CONTROL)
+#define bfin_write_CAN1_CONTROL(val)	bfin_write16(CAN1_CONTROL, val)
+#define bfin_read_CAN1_INTR()		bfin_read16(CAN1_INTR)
+#define bfin_write_CAN1_INTR(val)	bfin_write16(CAN1_INTR, val)
+#define bfin_read_CAN1_MBTD()		bfin_read16(CAN1_MBTD)
+#define bfin_write_CAN1_MBTD(val)	bfin_write16(CAN1_MBTD, val)
+#define bfin_read_CAN1_EWR()		bfin_read16(CAN1_EWR)
+#define bfin_write_CAN1_EWR(val)	bfin_write16(CAN1_EWR, val)
+#define bfin_read_CAN1_ESR()		bfin_read16(CAN1_ESR)
+#define bfin_write_CAN1_ESR(val)	bfin_write16(CAN1_ESR, val)
+#define bfin_read_CAN1_UCCNT()		bfin_read16(CAN1_UCCNT)
+#define bfin_write_CAN1_UCCNT(val)	bfin_write16(CAN1_UCCNT, val)
+#define bfin_read_CAN1_UCRC()		bfin_read16(CAN1_UCRC)
+#define bfin_write_CAN1_UCRC(val)	bfin_write16(CAN1_UCRC, val)
+#define bfin_read_CAN1_UCCNF()		bfin_read16(CAN1_UCCNF)
+#define bfin_write_CAN1_UCCNF(val)	bfin_write16(CAN1_UCCNF, val)
+
+/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */
+
+#define bfin_read_CAN1_AM00L()		bfin_read16(CAN1_AM00L)
+#define bfin_write_CAN1_AM00L(val)	bfin_write16(CAN1_AM00L, val)
+#define bfin_read_CAN1_AM00H()		bfin_read16(CAN1_AM00H)
+#define bfin_write_CAN1_AM00H(val)	bfin_write16(CAN1_AM00H, val)
+#define bfin_read_CAN1_AM01L()		bfin_read16(CAN1_AM01L)
+#define bfin_write_CAN1_AM01L(val)	bfin_write16(CAN1_AM01L, val)
+#define bfin_read_CAN1_AM01H()		bfin_read16(CAN1_AM01H)
+#define bfin_write_CAN1_AM01H(val)	bfin_write16(CAN1_AM01H, val)
+#define bfin_read_CAN1_AM02L()		bfin_read16(CAN1_AM02L)
+#define bfin_write_CAN1_AM02L(val)	bfin_write16(CAN1_AM02L, val)
+#define bfin_read_CAN1_AM02H()		bfin_read16(CAN1_AM02H)
+#define bfin_write_CAN1_AM02H(val)	bfin_write16(CAN1_AM02H, val)
+#define bfin_read_CAN1_AM03L()		bfin_read16(CAN1_AM03L)
+#define bfin_write_CAN1_AM03L(val)	bfin_write16(CAN1_AM03L, val)
+#define bfin_read_CAN1_AM03H()		bfin_read16(CAN1_AM03H)
+#define bfin_write_CAN1_AM03H(val)	bfin_write16(CAN1_AM03H, val)
+#define bfin_read_CAN1_AM04L()		bfin_read16(CAN1_AM04L)
+#define bfin_write_CAN1_AM04L(val)	bfin_write16(CAN1_AM04L, val)
+#define bfin_read_CAN1_AM04H()		bfin_read16(CAN1_AM04H)
+#define bfin_write_CAN1_AM04H(val)	bfin_write16(CAN1_AM04H, val)
+#define bfin_read_CAN1_AM05L()		bfin_read16(CAN1_AM05L)
+#define bfin_write_CAN1_AM05L(val)	bfin_write16(CAN1_AM05L, val)
+#define bfin_read_CAN1_AM05H()		bfin_read16(CAN1_AM05H)
+#define bfin_write_CAN1_AM05H(val)	bfin_write16(CAN1_AM05H, val)
+#define bfin_read_CAN1_AM06L()		bfin_read16(CAN1_AM06L)
+#define bfin_write_CAN1_AM06L(val)	bfin_write16(CAN1_AM06L, val)
+#define bfin_read_CAN1_AM06H()		bfin_read16(CAN1_AM06H)
+#define bfin_write_CAN1_AM06H(val)	bfin_write16(CAN1_AM06H, val)
+#define bfin_read_CAN1_AM07L()		bfin_read16(CAN1_AM07L)
+#define bfin_write_CAN1_AM07L(val)	bfin_write16(CAN1_AM07L, val)
+#define bfin_read_CAN1_AM07H()		bfin_read16(CAN1_AM07H)
+#define bfin_write_CAN1_AM07H(val)	bfin_write16(CAN1_AM07H, val)
+#define bfin_read_CAN1_AM08L()		bfin_read16(CAN1_AM08L)
+#define bfin_write_CAN1_AM08L(val)	bfin_write16(CAN1_AM08L, val)
+#define bfin_read_CAN1_AM08H()		bfin_read16(CAN1_AM08H)
+#define bfin_write_CAN1_AM08H(val)	bfin_write16(CAN1_AM08H, val)
+#define bfin_read_CAN1_AM09L()		bfin_read16(CAN1_AM09L)
+#define bfin_write_CAN1_AM09L(val)	bfin_write16(CAN1_AM09L, val)
+#define bfin_read_CAN1_AM09H()		bfin_read16(CAN1_AM09H)
+#define bfin_write_CAN1_AM09H(val)	bfin_write16(CAN1_AM09H, val)
+#define bfin_read_CAN1_AM10L()		bfin_read16(CAN1_AM10L)
+#define bfin_write_CAN1_AM10L(val)	bfin_write16(CAN1_AM10L, val)
+#define bfin_read_CAN1_AM10H()		bfin_read16(CAN1_AM10H)
+#define bfin_write_CAN1_AM10H(val)	bfin_write16(CAN1_AM10H, val)
+#define bfin_read_CAN1_AM11L()		bfin_read16(CAN1_AM11L)
+#define bfin_write_CAN1_AM11L(val)	bfin_write16(CAN1_AM11L, val)
+#define bfin_read_CAN1_AM11H()		bfin_read16(CAN1_AM11H)
+#define bfin_write_CAN1_AM11H(val)	bfin_write16(CAN1_AM11H, val)
+#define bfin_read_CAN1_AM12L()		bfin_read16(CAN1_AM12L)
+#define bfin_write_CAN1_AM12L(val)	bfin_write16(CAN1_AM12L, val)
+#define bfin_read_CAN1_AM12H()		bfin_read16(CAN1_AM12H)
+#define bfin_write_CAN1_AM12H(val)	bfin_write16(CAN1_AM12H, val)
+#define bfin_read_CAN1_AM13L()		bfin_read16(CAN1_AM13L)
+#define bfin_write_CAN1_AM13L(val)	bfin_write16(CAN1_AM13L, val)
+#define bfin_read_CAN1_AM13H()		bfin_read16(CAN1_AM13H)
+#define bfin_write_CAN1_AM13H(val)	bfin_write16(CAN1_AM13H, val)
+#define bfin_read_CAN1_AM14L()		bfin_read16(CAN1_AM14L)
+#define bfin_write_CAN1_AM14L(val)	bfin_write16(CAN1_AM14L, val)
+#define bfin_read_CAN1_AM14H()		bfin_read16(CAN1_AM14H)
+#define bfin_write_CAN1_AM14H(val)	bfin_write16(CAN1_AM14H, val)
+#define bfin_read_CAN1_AM15L()		bfin_read16(CAN1_AM15L)
+#define bfin_write_CAN1_AM15L(val)	bfin_write16(CAN1_AM15L, val)
+#define bfin_read_CAN1_AM15H()		bfin_read16(CAN1_AM15H)
+#define bfin_write_CAN1_AM15H(val)	bfin_write16(CAN1_AM15H, val)
+
+/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */
+
+#define bfin_read_CAN1_AM16L()		bfin_read16(CAN1_AM16L)
+#define bfin_write_CAN1_AM16L(val)	bfin_write16(CAN1_AM16L, val)
+#define bfin_read_CAN1_AM16H()		bfin_read16(CAN1_AM16H)
+#define bfin_write_CAN1_AM16H(val)	bfin_write16(CAN1_AM16H, val)
+#define bfin_read_CAN1_AM17L()		bfin_read16(CAN1_AM17L)
+#define bfin_write_CAN1_AM17L(val)	bfin_write16(CAN1_AM17L, val)
+#define bfin_read_CAN1_AM17H()		bfin_read16(CAN1_AM17H)
+#define bfin_write_CAN1_AM17H(val)	bfin_write16(CAN1_AM17H, val)
+#define bfin_read_CAN1_AM18L()		bfin_read16(CAN1_AM18L)
+#define bfin_write_CAN1_AM18L(val)	bfin_write16(CAN1_AM18L, val)
+#define bfin_read_CAN1_AM18H()		bfin_read16(CAN1_AM18H)
+#define bfin_write_CAN1_AM18H(val)	bfin_write16(CAN1_AM18H, val)
+#define bfin_read_CAN1_AM19L()		bfin_read16(CAN1_AM19L)
+#define bfin_write_CAN1_AM19L(val)	bfin_write16(CAN1_AM19L, val)
+#define bfin_read_CAN1_AM19H()		bfin_read16(CAN1_AM19H)
+#define bfin_write_CAN1_AM19H(val)	bfin_write16(CAN1_AM19H, val)
+#define bfin_read_CAN1_AM20L()		bfin_read16(CAN1_AM20L)
+#define bfin_write_CAN1_AM20L(val)	bfin_write16(CAN1_AM20L, val)
+#define bfin_read_CAN1_AM20H()		bfin_read16(CAN1_AM20H)
+#define bfin_write_CAN1_AM20H(val)	bfin_write16(CAN1_AM20H, val)
+#define bfin_read_CAN1_AM21L()		bfin_read16(CAN1_AM21L)
+#define bfin_write_CAN1_AM21L(val)	bfin_write16(CAN1_AM21L, val)
+#define bfin_read_CAN1_AM21H()		bfin_read16(CAN1_AM21H)
+#define bfin_write_CAN1_AM21H(val)	bfin_write16(CAN1_AM21H, val)
+#define bfin_read_CAN1_AM22L()		bfin_read16(CAN1_AM22L)
+#define bfin_write_CAN1_AM22L(val)	bfin_write16(CAN1_AM22L, val)
+#define bfin_read_CAN1_AM22H()		bfin_read16(CAN1_AM22H)
+#define bfin_write_CAN1_AM22H(val)	bfin_write16(CAN1_AM22H, val)
+#define bfin_read_CAN1_AM23L()		bfin_read16(CAN1_AM23L)
+#define bfin_write_CAN1_AM23L(val)	bfin_write16(CAN1_AM23L, val)
+#define bfin_read_CAN1_AM23H()		bfin_read16(CAN1_AM23H)
+#define bfin_write_CAN1_AM23H(val)	bfin_write16(CAN1_AM23H, val)
+#define bfin_read_CAN1_AM24L()		bfin_read16(CAN1_AM24L)
+#define bfin_write_CAN1_AM24L(val)	bfin_write16(CAN1_AM24L, val)
+#define bfin_read_CAN1_AM24H()		bfin_read16(CAN1_AM24H)
+#define bfin_write_CAN1_AM24H(val)	bfin_write16(CAN1_AM24H, val)
+#define bfin_read_CAN1_AM25L()		bfin_read16(CAN1_AM25L)
+#define bfin_write_CAN1_AM25L(val)	bfin_write16(CAN1_AM25L, val)
+#define bfin_read_CAN1_AM25H()		bfin_read16(CAN1_AM25H)
+#define bfin_write_CAN1_AM25H(val)	bfin_write16(CAN1_AM25H, val)
+#define bfin_read_CAN1_AM26L()		bfin_read16(CAN1_AM26L)
+#define bfin_write_CAN1_AM26L(val)	bfin_write16(CAN1_AM26L, val)
+#define bfin_read_CAN1_AM26H()		bfin_read16(CAN1_AM26H)
+#define bfin_write_CAN1_AM26H(val)	bfin_write16(CAN1_AM26H, val)
+#define bfin_read_CAN1_AM27L()		bfin_read16(CAN1_AM27L)
+#define bfin_write_CAN1_AM27L(val)	bfin_write16(CAN1_AM27L, val)
+#define bfin_read_CAN1_AM27H()		bfin_read16(CAN1_AM27H)
+#define bfin_write_CAN1_AM27H(val)	bfin_write16(CAN1_AM27H, val)
+#define bfin_read_CAN1_AM28L()		bfin_read16(CAN1_AM28L)
+#define bfin_write_CAN1_AM28L(val)	bfin_write16(CAN1_AM28L, val)
+#define bfin_read_CAN1_AM28H()		bfin_read16(CAN1_AM28H)
+#define bfin_write_CAN1_AM28H(val)	bfin_write16(CAN1_AM28H, val)
+#define bfin_read_CAN1_AM29L()		bfin_read16(CAN1_AM29L)
+#define bfin_write_CAN1_AM29L(val)	bfin_write16(CAN1_AM29L, val)
+#define bfin_read_CAN1_AM29H()		bfin_read16(CAN1_AM29H)
+#define bfin_write_CAN1_AM29H(val)	bfin_write16(CAN1_AM29H, val)
+#define bfin_read_CAN1_AM30L()		bfin_read16(CAN1_AM30L)
+#define bfin_write_CAN1_AM30L(val)	bfin_write16(CAN1_AM30L, val)
+#define bfin_read_CAN1_AM30H()		bfin_read16(CAN1_AM30H)
+#define bfin_write_CAN1_AM30H(val)	bfin_write16(CAN1_AM30H, val)
+#define bfin_read_CAN1_AM31L()		bfin_read16(CAN1_AM31L)
+#define bfin_write_CAN1_AM31L(val)	bfin_write16(CAN1_AM31L, val)
+#define bfin_read_CAN1_AM31H()		bfin_read16(CAN1_AM31H)
+#define bfin_write_CAN1_AM31H(val)	bfin_write16(CAN1_AM31H, val)
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define bfin_read_CAN1_MB00_DATA0()		bfin_read16(CAN1_MB00_DATA0)
+#define bfin_write_CAN1_MB00_DATA0(val)		bfin_write16(CAN1_MB00_DATA0, val)
+#define bfin_read_CAN1_MB00_DATA1()		bfin_read16(CAN1_MB00_DATA1)
+#define bfin_write_CAN1_MB00_DATA1(val)		bfin_write16(CAN1_MB00_DATA1, val)
+#define bfin_read_CAN1_MB00_DATA2()		bfin_read16(CAN1_MB00_DATA2)
+#define bfin_write_CAN1_MB00_DATA2(val)		bfin_write16(CAN1_MB00_DATA2, val)
+#define bfin_read_CAN1_MB00_DATA3()		bfin_read16(CAN1_MB00_DATA3)
+#define bfin_write_CAN1_MB00_DATA3(val)		bfin_write16(CAN1_MB00_DATA3, val)
+#define bfin_read_CAN1_MB00_LENGTH()		bfin_read16(CAN1_MB00_LENGTH)
+#define bfin_write_CAN1_MB00_LENGTH(val)	bfin_write16(CAN1_MB00_LENGTH, val)
+#define bfin_read_CAN1_MB00_TIMESTAMP()		bfin_read16(CAN1_MB00_TIMESTAMP)
+#define bfin_write_CAN1_MB00_TIMESTAMP(val)	bfin_write16(CAN1_MB00_TIMESTAMP, val)
+#define bfin_read_CAN1_MB00_ID0()		bfin_read16(CAN1_MB00_ID0)
+#define bfin_write_CAN1_MB00_ID0(val)		bfin_write16(CAN1_MB00_ID0, val)
+#define bfin_read_CAN1_MB00_ID1()		bfin_read16(CAN1_MB00_ID1)
+#define bfin_write_CAN1_MB00_ID1(val)		bfin_write16(CAN1_MB00_ID1, val)
+#define bfin_read_CAN1_MB01_DATA0()		bfin_read16(CAN1_MB01_DATA0)
+#define bfin_write_CAN1_MB01_DATA0(val)		bfin_write16(CAN1_MB01_DATA0, val)
+#define bfin_read_CAN1_MB01_DATA1()		bfin_read16(CAN1_MB01_DATA1)
+#define bfin_write_CAN1_MB01_DATA1(val)		bfin_write16(CAN1_MB01_DATA1, val)
+#define bfin_read_CAN1_MB01_DATA2()		bfin_read16(CAN1_MB01_DATA2)
+#define bfin_write_CAN1_MB01_DATA2(val)		bfin_write16(CAN1_MB01_DATA2, val)
+#define bfin_read_CAN1_MB01_DATA3()		bfin_read16(CAN1_MB01_DATA3)
+#define bfin_write_CAN1_MB01_DATA3(val)		bfin_write16(CAN1_MB01_DATA3, val)
+#define bfin_read_CAN1_MB01_LENGTH()		bfin_read16(CAN1_MB01_LENGTH)
+#define bfin_write_CAN1_MB01_LENGTH(val)	bfin_write16(CAN1_MB01_LENGTH, val)
+#define bfin_read_CAN1_MB01_TIMESTAMP()		bfin_read16(CAN1_MB01_TIMESTAMP)
+#define bfin_write_CAN1_MB01_TIMESTAMP(val)	bfin_write16(CAN1_MB01_TIMESTAMP, val)
+#define bfin_read_CAN1_MB01_ID0()		bfin_read16(CAN1_MB01_ID0)
+#define bfin_write_CAN1_MB01_ID0(val)		bfin_write16(CAN1_MB01_ID0, val)
+#define bfin_read_CAN1_MB01_ID1()		bfin_read16(CAN1_MB01_ID1)
+#define bfin_write_CAN1_MB01_ID1(val)		bfin_write16(CAN1_MB01_ID1, val)
+#define bfin_read_CAN1_MB02_DATA0()		bfin_read16(CAN1_MB02_DATA0)
+#define bfin_write_CAN1_MB02_DATA0(val)		bfin_write16(CAN1_MB02_DATA0, val)
+#define bfin_read_CAN1_MB02_DATA1()		bfin_read16(CAN1_MB02_DATA1)
+#define bfin_write_CAN1_MB02_DATA1(val)		bfin_write16(CAN1_MB02_DATA1, val)
+#define bfin_read_CAN1_MB02_DATA2()		bfin_read16(CAN1_MB02_DATA2)
+#define bfin_write_CAN1_MB02_DATA2(val)		bfin_write16(CAN1_MB02_DATA2, val)
+#define bfin_read_CAN1_MB02_DATA3()		bfin_read16(CAN1_MB02_DATA3)
+#define bfin_write_CAN1_MB02_DATA3(val)		bfin_write16(CAN1_MB02_DATA3, val)
+#define bfin_read_CAN1_MB02_LENGTH()		bfin_read16(CAN1_MB02_LENGTH)
+#define bfin_write_CAN1_MB02_LENGTH(val)	bfin_write16(CAN1_MB02_LENGTH, val)
+#define bfin_read_CAN1_MB02_TIMESTAMP()		bfin_read16(CAN1_MB02_TIMESTAMP)
+#define bfin_write_CAN1_MB02_TIMESTAMP(val)	bfin_write16(CAN1_MB02_TIMESTAMP, val)
+#define bfin_read_CAN1_MB02_ID0()		bfin_read16(CAN1_MB02_ID0)
+#define bfin_write_CAN1_MB02_ID0(val)		bfin_write16(CAN1_MB02_ID0, val)
+#define bfin_read_CAN1_MB02_ID1()		bfin_read16(CAN1_MB02_ID1)
+#define bfin_write_CAN1_MB02_ID1(val)		bfin_write16(CAN1_MB02_ID1, val)
+#define bfin_read_CAN1_MB03_DATA0()		bfin_read16(CAN1_MB03_DATA0)
+#define bfin_write_CAN1_MB03_DATA0(val)		bfin_write16(CAN1_MB03_DATA0, val)
+#define bfin_read_CAN1_MB03_DATA1()		bfin_read16(CAN1_MB03_DATA1)
+#define bfin_write_CAN1_MB03_DATA1(val)		bfin_write16(CAN1_MB03_DATA1, val)
+#define bfin_read_CAN1_MB03_DATA2()		bfin_read16(CAN1_MB03_DATA2)
+#define bfin_write_CAN1_MB03_DATA2(val)		bfin_write16(CAN1_MB03_DATA2, val)
+#define bfin_read_CAN1_MB03_DATA3()		bfin_read16(CAN1_MB03_DATA3)
+#define bfin_write_CAN1_MB03_DATA3(val)		bfin_write16(CAN1_MB03_DATA3, val)
+#define bfin_read_CAN1_MB03_LENGTH()		bfin_read16(CAN1_MB03_LENGTH)
+#define bfin_write_CAN1_MB03_LENGTH(val)	bfin_write16(CAN1_MB03_LENGTH, val)
+#define bfin_read_CAN1_MB03_TIMESTAMP()		bfin_read16(CAN1_MB03_TIMESTAMP)
+#define bfin_write_CAN1_MB03_TIMESTAMP(val)	bfin_write16(CAN1_MB03_TIMESTAMP, val)
+#define bfin_read_CAN1_MB03_ID0()		bfin_read16(CAN1_MB03_ID0)
+#define bfin_write_CAN1_MB03_ID0(val)		bfin_write16(CAN1_MB03_ID0, val)
+#define bfin_read_CAN1_MB03_ID1()		bfin_read16(CAN1_MB03_ID1)
+#define bfin_write_CAN1_MB03_ID1(val)		bfin_write16(CAN1_MB03_ID1, val)
+#define bfin_read_CAN1_MB04_DATA0()		bfin_read16(CAN1_MB04_DATA0)
+#define bfin_write_CAN1_MB04_DATA0(val)		bfin_write16(CAN1_MB04_DATA0, val)
+#define bfin_read_CAN1_MB04_DATA1()		bfin_read16(CAN1_MB04_DATA1)
+#define bfin_write_CAN1_MB04_DATA1(val)		bfin_write16(CAN1_MB04_DATA1, val)
+#define bfin_read_CAN1_MB04_DATA2()		bfin_read16(CAN1_MB04_DATA2)
+#define bfin_write_CAN1_MB04_DATA2(val)		bfin_write16(CAN1_MB04_DATA2, val)
+#define bfin_read_CAN1_MB04_DATA3()		bfin_read16(CAN1_MB04_DATA3)
+#define bfin_write_CAN1_MB04_DATA3(val)		bfin_write16(CAN1_MB04_DATA3, val)
+#define bfin_read_CAN1_MB04_LENGTH()		bfin_read16(CAN1_MB04_LENGTH)
+#define bfin_write_CAN1_MB04_LENGTH(val)	bfin_write16(CAN1_MB04_LENGTH, val)
+#define bfin_read_CAN1_MB04_TIMESTAMP()		bfin_read16(CAN1_MB04_TIMESTAMP)
+#define bfin_write_CAN1_MB04_TIMESTAMP(val)	bfin_write16(CAN1_MB04_TIMESTAMP, val)
+#define bfin_read_CAN1_MB04_ID0()		bfin_read16(CAN1_MB04_ID0)
+#define bfin_write_CAN1_MB04_ID0(val)		bfin_write16(CAN1_MB04_ID0, val)
+#define bfin_read_CAN1_MB04_ID1()		bfin_read16(CAN1_MB04_ID1)
+#define bfin_write_CAN1_MB04_ID1(val)		bfin_write16(CAN1_MB04_ID1, val)
+#define bfin_read_CAN1_MB05_DATA0()		bfin_read16(CAN1_MB05_DATA0)
+#define bfin_write_CAN1_MB05_DATA0(val)		bfin_write16(CAN1_MB05_DATA0, val)
+#define bfin_read_CAN1_MB05_DATA1()		bfin_read16(CAN1_MB05_DATA1)
+#define bfin_write_CAN1_MB05_DATA1(val)		bfin_write16(CAN1_MB05_DATA1, val)
+#define bfin_read_CAN1_MB05_DATA2()		bfin_read16(CAN1_MB05_DATA2)
+#define bfin_write_CAN1_MB05_DATA2(val)		bfin_write16(CAN1_MB05_DATA2, val)
+#define bfin_read_CAN1_MB05_DATA3()		bfin_read16(CAN1_MB05_DATA3)
+#define bfin_write_CAN1_MB05_DATA3(val)		bfin_write16(CAN1_MB05_DATA3, val)
+#define bfin_read_CAN1_MB05_LENGTH()		bfin_read16(CAN1_MB05_LENGTH)
+#define bfin_write_CAN1_MB05_LENGTH(val)	bfin_write16(CAN1_MB05_LENGTH, val)
+#define bfin_read_CAN1_MB05_TIMESTAMP()		bfin_read16(CAN1_MB05_TIMESTAMP)
+#define bfin_write_CAN1_MB05_TIMESTAMP(val)	bfin_write16(CAN1_MB05_TIMESTAMP, val)
+#define bfin_read_CAN1_MB05_ID0()		bfin_read16(CAN1_MB05_ID0)
+#define bfin_write_CAN1_MB05_ID0(val)		bfin_write16(CAN1_MB05_ID0, val)
+#define bfin_read_CAN1_MB05_ID1()		bfin_read16(CAN1_MB05_ID1)
+#define bfin_write_CAN1_MB05_ID1(val)		bfin_write16(CAN1_MB05_ID1, val)
+#define bfin_read_CAN1_MB06_DATA0()		bfin_read16(CAN1_MB06_DATA0)
+#define bfin_write_CAN1_MB06_DATA0(val)		bfin_write16(CAN1_MB06_DATA0, val)
+#define bfin_read_CAN1_MB06_DATA1()		bfin_read16(CAN1_MB06_DATA1)
+#define bfin_write_CAN1_MB06_DATA1(val)		bfin_write16(CAN1_MB06_DATA1, val)
+#define bfin_read_CAN1_MB06_DATA2()		bfin_read16(CAN1_MB06_DATA2)
+#define bfin_write_CAN1_MB06_DATA2(val)		bfin_write16(CAN1_MB06_DATA2, val)
+#define bfin_read_CAN1_MB06_DATA3()		bfin_read16(CAN1_MB06_DATA3)
+#define bfin_write_CAN1_MB06_DATA3(val)		bfin_write16(CAN1_MB06_DATA3, val)
+#define bfin_read_CAN1_MB06_LENGTH()		bfin_read16(CAN1_MB06_LENGTH)
+#define bfin_write_CAN1_MB06_LENGTH(val)	bfin_write16(CAN1_MB06_LENGTH, val)
+#define bfin_read_CAN1_MB06_TIMESTAMP()		bfin_read16(CAN1_MB06_TIMESTAMP)
+#define bfin_write_CAN1_MB06_TIMESTAMP(val)	bfin_write16(CAN1_MB06_TIMESTAMP, val)
+#define bfin_read_CAN1_MB06_ID0()		bfin_read16(CAN1_MB06_ID0)
+#define bfin_write_CAN1_MB06_ID0(val)		bfin_write16(CAN1_MB06_ID0, val)
+#define bfin_read_CAN1_MB06_ID1()		bfin_read16(CAN1_MB06_ID1)
+#define bfin_write_CAN1_MB06_ID1(val)		bfin_write16(CAN1_MB06_ID1, val)
+#define bfin_read_CAN1_MB07_DATA0()		bfin_read16(CAN1_MB07_DATA0)
+#define bfin_write_CAN1_MB07_DATA0(val)		bfin_write16(CAN1_MB07_DATA0, val)
+#define bfin_read_CAN1_MB07_DATA1()		bfin_read16(CAN1_MB07_DATA1)
+#define bfin_write_CAN1_MB07_DATA1(val)		bfin_write16(CAN1_MB07_DATA1, val)
+#define bfin_read_CAN1_MB07_DATA2()		bfin_read16(CAN1_MB07_DATA2)
+#define bfin_write_CAN1_MB07_DATA2(val)		bfin_write16(CAN1_MB07_DATA2, val)
+#define bfin_read_CAN1_MB07_DATA3()		bfin_read16(CAN1_MB07_DATA3)
+#define bfin_write_CAN1_MB07_DATA3(val)		bfin_write16(CAN1_MB07_DATA3, val)
+#define bfin_read_CAN1_MB07_LENGTH()		bfin_read16(CAN1_MB07_LENGTH)
+#define bfin_write_CAN1_MB07_LENGTH(val)	bfin_write16(CAN1_MB07_LENGTH, val)
+#define bfin_read_CAN1_MB07_TIMESTAMP()		bfin_read16(CAN1_MB07_TIMESTAMP)
+#define bfin_write_CAN1_MB07_TIMESTAMP(val)	bfin_write16(CAN1_MB07_TIMESTAMP, val)
+#define bfin_read_CAN1_MB07_ID0()		bfin_read16(CAN1_MB07_ID0)
+#define bfin_write_CAN1_MB07_ID0(val)		bfin_write16(CAN1_MB07_ID0, val)
+#define bfin_read_CAN1_MB07_ID1()		bfin_read16(CAN1_MB07_ID1)
+#define bfin_write_CAN1_MB07_ID1(val)		bfin_write16(CAN1_MB07_ID1, val)
+#define bfin_read_CAN1_MB08_DATA0()		bfin_read16(CAN1_MB08_DATA0)
+#define bfin_write_CAN1_MB08_DATA0(val)		bfin_write16(CAN1_MB08_DATA0, val)
+#define bfin_read_CAN1_MB08_DATA1()		bfin_read16(CAN1_MB08_DATA1)
+#define bfin_write_CAN1_MB08_DATA1(val)		bfin_write16(CAN1_MB08_DATA1, val)
+#define bfin_read_CAN1_MB08_DATA2()		bfin_read16(CAN1_MB08_DATA2)
+#define bfin_write_CAN1_MB08_DATA2(val)		bfin_write16(CAN1_MB08_DATA2, val)
+#define bfin_read_CAN1_MB08_DATA3()		bfin_read16(CAN1_MB08_DATA3)
+#define bfin_write_CAN1_MB08_DATA3(val)		bfin_write16(CAN1_MB08_DATA3, val)
+#define bfin_read_CAN1_MB08_LENGTH()		bfin_read16(CAN1_MB08_LENGTH)
+#define bfin_write_CAN1_MB08_LENGTH(val)	bfin_write16(CAN1_MB08_LENGTH, val)
+#define bfin_read_CAN1_MB08_TIMESTAMP()		bfin_read16(CAN1_MB08_TIMESTAMP)
+#define bfin_write_CAN1_MB08_TIMESTAMP(val)	bfin_write16(CAN1_MB08_TIMESTAMP, val)
+#define bfin_read_CAN1_MB08_ID0()		bfin_read16(CAN1_MB08_ID0)
+#define bfin_write_CAN1_MB08_ID0(val)		bfin_write16(CAN1_MB08_ID0, val)
+#define bfin_read_CAN1_MB08_ID1()		bfin_read16(CAN1_MB08_ID1)
+#define bfin_write_CAN1_MB08_ID1(val)		bfin_write16(CAN1_MB08_ID1, val)
+#define bfin_read_CAN1_MB09_DATA0()		bfin_read16(CAN1_MB09_DATA0)
+#define bfin_write_CAN1_MB09_DATA0(val)		bfin_write16(CAN1_MB09_DATA0, val)
+#define bfin_read_CAN1_MB09_DATA1()		bfin_read16(CAN1_MB09_DATA1)
+#define bfin_write_CAN1_MB09_DATA1(val)		bfin_write16(CAN1_MB09_DATA1, val)
+#define bfin_read_CAN1_MB09_DATA2()		bfin_read16(CAN1_MB09_DATA2)
+#define bfin_write_CAN1_MB09_DATA2(val)		bfin_write16(CAN1_MB09_DATA2, val)
+#define bfin_read_CAN1_MB09_DATA3()		bfin_read16(CAN1_MB09_DATA3)
+#define bfin_write_CAN1_MB09_DATA3(val)		bfin_write16(CAN1_MB09_DATA3, val)
+#define bfin_read_CAN1_MB09_LENGTH()		bfin_read16(CAN1_MB09_LENGTH)
+#define bfin_write_CAN1_MB09_LENGTH(val)	bfin_write16(CAN1_MB09_LENGTH, val)
+#define bfin_read_CAN1_MB09_TIMESTAMP()		bfin_read16(CAN1_MB09_TIMESTAMP)
+#define bfin_write_CAN1_MB09_TIMESTAMP(val)	bfin_write16(CAN1_MB09_TIMESTAMP, val)
+#define bfin_read_CAN1_MB09_ID0()		bfin_read16(CAN1_MB09_ID0)
+#define bfin_write_CAN1_MB09_ID0(val)		bfin_write16(CAN1_MB09_ID0, val)
+#define bfin_read_CAN1_MB09_ID1()		bfin_read16(CAN1_MB09_ID1)
+#define bfin_write_CAN1_MB09_ID1(val)		bfin_write16(CAN1_MB09_ID1, val)
+#define bfin_read_CAN1_MB10_DATA0()		bfin_read16(CAN1_MB10_DATA0)
+#define bfin_write_CAN1_MB10_DATA0(val)		bfin_write16(CAN1_MB10_DATA0, val)
+#define bfin_read_CAN1_MB10_DATA1()		bfin_read16(CAN1_MB10_DATA1)
+#define bfin_write_CAN1_MB10_DATA1(val)		bfin_write16(CAN1_MB10_DATA1, val)
+#define bfin_read_CAN1_MB10_DATA2()		bfin_read16(CAN1_MB10_DATA2)
+#define bfin_write_CAN1_MB10_DATA2(val)		bfin_write16(CAN1_MB10_DATA2, val)
+#define bfin_read_CAN1_MB10_DATA3()		bfin_read16(CAN1_MB10_DATA3)
+#define bfin_write_CAN1_MB10_DATA3(val)		bfin_write16(CAN1_MB10_DATA3, val)
+#define bfin_read_CAN1_MB10_LENGTH()		bfin_read16(CAN1_MB10_LENGTH)
+#define bfin_write_CAN1_MB10_LENGTH(val)	bfin_write16(CAN1_MB10_LENGTH, val)
+#define bfin_read_CAN1_MB10_TIMESTAMP()		bfin_read16(CAN1_MB10_TIMESTAMP)
+#define bfin_write_CAN1_MB10_TIMESTAMP(val)	bfin_write16(CAN1_MB10_TIMESTAMP, val)
+#define bfin_read_CAN1_MB10_ID0()		bfin_read16(CAN1_MB10_ID0)
+#define bfin_write_CAN1_MB10_ID0(val)		bfin_write16(CAN1_MB10_ID0, val)
+#define bfin_read_CAN1_MB10_ID1()		bfin_read16(CAN1_MB10_ID1)
+#define bfin_write_CAN1_MB10_ID1(val)		bfin_write16(CAN1_MB10_ID1, val)
+#define bfin_read_CAN1_MB11_DATA0()		bfin_read16(CAN1_MB11_DATA0)
+#define bfin_write_CAN1_MB11_DATA0(val)		bfin_write16(CAN1_MB11_DATA0, val)
+#define bfin_read_CAN1_MB11_DATA1()		bfin_read16(CAN1_MB11_DATA1)
+#define bfin_write_CAN1_MB11_DATA1(val)		bfin_write16(CAN1_MB11_DATA1, val)
+#define bfin_read_CAN1_MB11_DATA2()		bfin_read16(CAN1_MB11_DATA2)
+#define bfin_write_CAN1_MB11_DATA2(val)		bfin_write16(CAN1_MB11_DATA2, val)
+#define bfin_read_CAN1_MB11_DATA3()		bfin_read16(CAN1_MB11_DATA3)
+#define bfin_write_CAN1_MB11_DATA3(val)		bfin_write16(CAN1_MB11_DATA3, val)
+#define bfin_read_CAN1_MB11_LENGTH()		bfin_read16(CAN1_MB11_LENGTH)
+#define bfin_write_CAN1_MB11_LENGTH(val)	bfin_write16(CAN1_MB11_LENGTH, val)
+#define bfin_read_CAN1_MB11_TIMESTAMP()		bfin_read16(CAN1_MB11_TIMESTAMP)
+#define bfin_write_CAN1_MB11_TIMESTAMP(val)	bfin_write16(CAN1_MB11_TIMESTAMP, val)
+#define bfin_read_CAN1_MB11_ID0()		bfin_read16(CAN1_MB11_ID0)
+#define bfin_write_CAN1_MB11_ID0(val)		bfin_write16(CAN1_MB11_ID0, val)
+#define bfin_read_CAN1_MB11_ID1()		bfin_read16(CAN1_MB11_ID1)
+#define bfin_write_CAN1_MB11_ID1(val)		bfin_write16(CAN1_MB11_ID1, val)
+#define bfin_read_CAN1_MB12_DATA0()		bfin_read16(CAN1_MB12_DATA0)
+#define bfin_write_CAN1_MB12_DATA0(val)		bfin_write16(CAN1_MB12_DATA0, val)
+#define bfin_read_CAN1_MB12_DATA1()		bfin_read16(CAN1_MB12_DATA1)
+#define bfin_write_CAN1_MB12_DATA1(val)		bfin_write16(CAN1_MB12_DATA1, val)
+#define bfin_read_CAN1_MB12_DATA2()		bfin_read16(CAN1_MB12_DATA2)
+#define bfin_write_CAN1_MB12_DATA2(val)		bfin_write16(CAN1_MB12_DATA2, val)
+#define bfin_read_CAN1_MB12_DATA3()		bfin_read16(CAN1_MB12_DATA3)
+#define bfin_write_CAN1_MB12_DATA3(val)		bfin_write16(CAN1_MB12_DATA3, val)
+#define bfin_read_CAN1_MB12_LENGTH()		bfin_read16(CAN1_MB12_LENGTH)
+#define bfin_write_CAN1_MB12_LENGTH(val)	bfin_write16(CAN1_MB12_LENGTH, val)
+#define bfin_read_CAN1_MB12_TIMESTAMP()		bfin_read16(CAN1_MB12_TIMESTAMP)
+#define bfin_write_CAN1_MB12_TIMESTAMP(val)	bfin_write16(CAN1_MB12_TIMESTAMP, val)
+#define bfin_read_CAN1_MB12_ID0()		bfin_read16(CAN1_MB12_ID0)
+#define bfin_write_CAN1_MB12_ID0(val)		bfin_write16(CAN1_MB12_ID0, val)
+#define bfin_read_CAN1_MB12_ID1()		bfin_read16(CAN1_MB12_ID1)
+#define bfin_write_CAN1_MB12_ID1(val)		bfin_write16(CAN1_MB12_ID1, val)
+#define bfin_read_CAN1_MB13_DATA0()		bfin_read16(CAN1_MB13_DATA0)
+#define bfin_write_CAN1_MB13_DATA0(val)		bfin_write16(CAN1_MB13_DATA0, val)
+#define bfin_read_CAN1_MB13_DATA1()		bfin_read16(CAN1_MB13_DATA1)
+#define bfin_write_CAN1_MB13_DATA1(val)		bfin_write16(CAN1_MB13_DATA1, val)
+#define bfin_read_CAN1_MB13_DATA2()		bfin_read16(CAN1_MB13_DATA2)
+#define bfin_write_CAN1_MB13_DATA2(val)		bfin_write16(CAN1_MB13_DATA2, val)
+#define bfin_read_CAN1_MB13_DATA3()		bfin_read16(CAN1_MB13_DATA3)
+#define bfin_write_CAN1_MB13_DATA3(val)		bfin_write16(CAN1_MB13_DATA3, val)
+#define bfin_read_CAN1_MB13_LENGTH()		bfin_read16(CAN1_MB13_LENGTH)
+#define bfin_write_CAN1_MB13_LENGTH(val)	bfin_write16(CAN1_MB13_LENGTH, val)
+#define bfin_read_CAN1_MB13_TIMESTAMP()		bfin_read16(CAN1_MB13_TIMESTAMP)
+#define bfin_write_CAN1_MB13_TIMESTAMP(val)	bfin_write16(CAN1_MB13_TIMESTAMP, val)
+#define bfin_read_CAN1_MB13_ID0()		bfin_read16(CAN1_MB13_ID0)
+#define bfin_write_CAN1_MB13_ID0(val)		bfin_write16(CAN1_MB13_ID0, val)
+#define bfin_read_CAN1_MB13_ID1()		bfin_read16(CAN1_MB13_ID1)
+#define bfin_write_CAN1_MB13_ID1(val)		bfin_write16(CAN1_MB13_ID1, val)
+#define bfin_read_CAN1_MB14_DATA0()		bfin_read16(CAN1_MB14_DATA0)
+#define bfin_write_CAN1_MB14_DATA0(val)		bfin_write16(CAN1_MB14_DATA0, val)
+#define bfin_read_CAN1_MB14_DATA1()		bfin_read16(CAN1_MB14_DATA1)
+#define bfin_write_CAN1_MB14_DATA1(val)		bfin_write16(CAN1_MB14_DATA1, val)
+#define bfin_read_CAN1_MB14_DATA2()		bfin_read16(CAN1_MB14_DATA2)
+#define bfin_write_CAN1_MB14_DATA2(val)		bfin_write16(CAN1_MB14_DATA2, val)
+#define bfin_read_CAN1_MB14_DATA3()		bfin_read16(CAN1_MB14_DATA3)
+#define bfin_write_CAN1_MB14_DATA3(val)		bfin_write16(CAN1_MB14_DATA3, val)
+#define bfin_read_CAN1_MB14_LENGTH()		bfin_read16(CAN1_MB14_LENGTH)
+#define bfin_write_CAN1_MB14_LENGTH(val)	bfin_write16(CAN1_MB14_LENGTH, val)
+#define bfin_read_CAN1_MB14_TIMESTAMP()		bfin_read16(CAN1_MB14_TIMESTAMP)
+#define bfin_write_CAN1_MB14_TIMESTAMP(val)	bfin_write16(CAN1_MB14_TIMESTAMP, val)
+#define bfin_read_CAN1_MB14_ID0()		bfin_read16(CAN1_MB14_ID0)
+#define bfin_write_CAN1_MB14_ID0(val)		bfin_write16(CAN1_MB14_ID0, val)
+#define bfin_read_CAN1_MB14_ID1()		bfin_read16(CAN1_MB14_ID1)
+#define bfin_write_CAN1_MB14_ID1(val)		bfin_write16(CAN1_MB14_ID1, val)
+#define bfin_read_CAN1_MB15_DATA0()		bfin_read16(CAN1_MB15_DATA0)
+#define bfin_write_CAN1_MB15_DATA0(val)		bfin_write16(CAN1_MB15_DATA0, val)
+#define bfin_read_CAN1_MB15_DATA1()		bfin_read16(CAN1_MB15_DATA1)
+#define bfin_write_CAN1_MB15_DATA1(val)		bfin_write16(CAN1_MB15_DATA1, val)
+#define bfin_read_CAN1_MB15_DATA2()		bfin_read16(CAN1_MB15_DATA2)
+#define bfin_write_CAN1_MB15_DATA2(val)		bfin_write16(CAN1_MB15_DATA2, val)
+#define bfin_read_CAN1_MB15_DATA3()		bfin_read16(CAN1_MB15_DATA3)
+#define bfin_write_CAN1_MB15_DATA3(val)		bfin_write16(CAN1_MB15_DATA3, val)
+#define bfin_read_CAN1_MB15_LENGTH()		bfin_read16(CAN1_MB15_LENGTH)
+#define bfin_write_CAN1_MB15_LENGTH(val)	bfin_write16(CAN1_MB15_LENGTH, val)
+#define bfin_read_CAN1_MB15_TIMESTAMP()		bfin_read16(CAN1_MB15_TIMESTAMP)
+#define bfin_write_CAN1_MB15_TIMESTAMP(val)	bfin_write16(CAN1_MB15_TIMESTAMP, val)
+#define bfin_read_CAN1_MB15_ID0()		bfin_read16(CAN1_MB15_ID0)
+#define bfin_write_CAN1_MB15_ID0(val)		bfin_write16(CAN1_MB15_ID0, val)
+#define bfin_read_CAN1_MB15_ID1()		bfin_read16(CAN1_MB15_ID1)
+#define bfin_write_CAN1_MB15_ID1(val)		bfin_write16(CAN1_MB15_ID1, val)
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define bfin_read_CAN1_MB16_DATA0()		bfin_read16(CAN1_MB16_DATA0)
+#define bfin_write_CAN1_MB16_DATA0(val)		bfin_write16(CAN1_MB16_DATA0, val)
+#define bfin_read_CAN1_MB16_DATA1()		bfin_read16(CAN1_MB16_DATA1)
+#define bfin_write_CAN1_MB16_DATA1(val)		bfin_write16(CAN1_MB16_DATA1, val)
+#define bfin_read_CAN1_MB16_DATA2()		bfin_read16(CAN1_MB16_DATA2)
+#define bfin_write_CAN1_MB16_DATA2(val)		bfin_write16(CAN1_MB16_DATA2, val)
+#define bfin_read_CAN1_MB16_DATA3()		bfin_read16(CAN1_MB16_DATA3)
+#define bfin_write_CAN1_MB16_DATA3(val)		bfin_write16(CAN1_MB16_DATA3, val)
+#define bfin_read_CAN1_MB16_LENGTH()		bfin_read16(CAN1_MB16_LENGTH)
+#define bfin_write_CAN1_MB16_LENGTH(val)	bfin_write16(CAN1_MB16_LENGTH, val)
+#define bfin_read_CAN1_MB16_TIMESTAMP()		bfin_read16(CAN1_MB16_TIMESTAMP)
+#define bfin_write_CAN1_MB16_TIMESTAMP(val)	bfin_write16(CAN1_MB16_TIMESTAMP, val)
+#define bfin_read_CAN1_MB16_ID0()		bfin_read16(CAN1_MB16_ID0)
+#define bfin_write_CAN1_MB16_ID0(val)		bfin_write16(CAN1_MB16_ID0, val)
+#define bfin_read_CAN1_MB16_ID1()		bfin_read16(CAN1_MB16_ID1)
+#define bfin_write_CAN1_MB16_ID1(val)		bfin_write16(CAN1_MB16_ID1, val)
+#define bfin_read_CAN1_MB17_DATA0()		bfin_read16(CAN1_MB17_DATA0)
+#define bfin_write_CAN1_MB17_DATA0(val)		bfin_write16(CAN1_MB17_DATA0, val)
+#define bfin_read_CAN1_MB17_DATA1()		bfin_read16(CAN1_MB17_DATA1)
+#define bfin_write_CAN1_MB17_DATA1(val)		bfin_write16(CAN1_MB17_DATA1, val)
+#define bfin_read_CAN1_MB17_DATA2()		bfin_read16(CAN1_MB17_DATA2)
+#define bfin_write_CAN1_MB17_DATA2(val)		bfin_write16(CAN1_MB17_DATA2, val)
+#define bfin_read_CAN1_MB17_DATA3()		bfin_read16(CAN1_MB17_DATA3)
+#define bfin_write_CAN1_MB17_DATA3(val)		bfin_write16(CAN1_MB17_DATA3, val)
+#define bfin_read_CAN1_MB17_LENGTH()		bfin_read16(CAN1_MB17_LENGTH)
+#define bfin_write_CAN1_MB17_LENGTH(val)	bfin_write16(CAN1_MB17_LENGTH, val)
+#define bfin_read_CAN1_MB17_TIMESTAMP()		bfin_read16(CAN1_MB17_TIMESTAMP)
+#define bfin_write_CAN1_MB17_TIMESTAMP(val)	bfin_write16(CAN1_MB17_TIMESTAMP, val)
+#define bfin_read_CAN1_MB17_ID0()		bfin_read16(CAN1_MB17_ID0)
+#define bfin_write_CAN1_MB17_ID0(val)		bfin_write16(CAN1_MB17_ID0, val)
+#define bfin_read_CAN1_MB17_ID1()		bfin_read16(CAN1_MB17_ID1)
+#define bfin_write_CAN1_MB17_ID1(val)		bfin_write16(CAN1_MB17_ID1, val)
+#define bfin_read_CAN1_MB18_DATA0()		bfin_read16(CAN1_MB18_DATA0)
+#define bfin_write_CAN1_MB18_DATA0(val)		bfin_write16(CAN1_MB18_DATA0, val)
+#define bfin_read_CAN1_MB18_DATA1()		bfin_read16(CAN1_MB18_DATA1)
+#define bfin_write_CAN1_MB18_DATA1(val)		bfin_write16(CAN1_MB18_DATA1, val)
+#define bfin_read_CAN1_MB18_DATA2()		bfin_read16(CAN1_MB18_DATA2)
+#define bfin_write_CAN1_MB18_DATA2(val)		bfin_write16(CAN1_MB18_DATA2, val)
+#define bfin_read_CAN1_MB18_DATA3()		bfin_read16(CAN1_MB18_DATA3)
+#define bfin_write_CAN1_MB18_DATA3(val)		bfin_write16(CAN1_MB18_DATA3, val)
+#define bfin_read_CAN1_MB18_LENGTH()		bfin_read16(CAN1_MB18_LENGTH)
+#define bfin_write_CAN1_MB18_LENGTH(val)	bfin_write16(CAN1_MB18_LENGTH, val)
+#define bfin_read_CAN1_MB18_TIMESTAMP()		bfin_read16(CAN1_MB18_TIMESTAMP)
+#define bfin_write_CAN1_MB18_TIMESTAMP(val)	bfin_write16(CAN1_MB18_TIMESTAMP, val)
+#define bfin_read_CAN1_MB18_ID0()		bfin_read16(CAN1_MB18_ID0)
+#define bfin_write_CAN1_MB18_ID0(val)		bfin_write16(CAN1_MB18_ID0, val)
+#define bfin_read_CAN1_MB18_ID1()		bfin_read16(CAN1_MB18_ID1)
+#define bfin_write_CAN1_MB18_ID1(val)		bfin_write16(CAN1_MB18_ID1, val)
+#define bfin_read_CAN1_MB19_DATA0()		bfin_read16(CAN1_MB19_DATA0)
+#define bfin_write_CAN1_MB19_DATA0(val)		bfin_write16(CAN1_MB19_DATA0, val)
+#define bfin_read_CAN1_MB19_DATA1()		bfin_read16(CAN1_MB19_DATA1)
+#define bfin_write_CAN1_MB19_DATA1(val)		bfin_write16(CAN1_MB19_DATA1, val)
+#define bfin_read_CAN1_MB19_DATA2()		bfin_read16(CAN1_MB19_DATA2)
+#define bfin_write_CAN1_MB19_DATA2(val)		bfin_write16(CAN1_MB19_DATA2, val)
+#define bfin_read_CAN1_MB19_DATA3()		bfin_read16(CAN1_MB19_DATA3)
+#define bfin_write_CAN1_MB19_DATA3(val)		bfin_write16(CAN1_MB19_DATA3, val)
+#define bfin_read_CAN1_MB19_LENGTH()		bfin_read16(CAN1_MB19_LENGTH)
+#define bfin_write_CAN1_MB19_LENGTH(val)	bfin_write16(CAN1_MB19_LENGTH, val)
+#define bfin_read_CAN1_MB19_TIMESTAMP()		bfin_read16(CAN1_MB19_TIMESTAMP)
+#define bfin_write_CAN1_MB19_TIMESTAMP(val)	bfin_write16(CAN1_MB19_TIMESTAMP, val)
+#define bfin_read_CAN1_MB19_ID0()		bfin_read16(CAN1_MB19_ID0)
+#define bfin_write_CAN1_MB19_ID0(val)		bfin_write16(CAN1_MB19_ID0, val)
+#define bfin_read_CAN1_MB19_ID1()		bfin_read16(CAN1_MB19_ID1)
+#define bfin_write_CAN1_MB19_ID1(val)		bfin_write16(CAN1_MB19_ID1, val)
+#define bfin_read_CAN1_MB20_DATA0()		bfin_read16(CAN1_MB20_DATA0)
+#define bfin_write_CAN1_MB20_DATA0(val)		bfin_write16(CAN1_MB20_DATA0, val)
+#define bfin_read_CAN1_MB20_DATA1()		bfin_read16(CAN1_MB20_DATA1)
+#define bfin_write_CAN1_MB20_DATA1(val)		bfin_write16(CAN1_MB20_DATA1, val)
+#define bfin_read_CAN1_MB20_DATA2()		bfin_read16(CAN1_MB20_DATA2)
+#define bfin_write_CAN1_MB20_DATA2(val)		bfin_write16(CAN1_MB20_DATA2, val)
+#define bfin_read_CAN1_MB20_DATA3()		bfin_read16(CAN1_MB20_DATA3)
+#define bfin_write_CAN1_MB20_DATA3(val)		bfin_write16(CAN1_MB20_DATA3, val)
+#define bfin_read_CAN1_MB20_LENGTH()		bfin_read16(CAN1_MB20_LENGTH)
+#define bfin_write_CAN1_MB20_LENGTH(val)	bfin_write16(CAN1_MB20_LENGTH, val)
+#define bfin_read_CAN1_MB20_TIMESTAMP()		bfin_read16(CAN1_MB20_TIMESTAMP)
+#define bfin_write_CAN1_MB20_TIMESTAMP(val)	bfin_write16(CAN1_MB20_TIMESTAMP, val)
+#define bfin_read_CAN1_MB20_ID0()		bfin_read16(CAN1_MB20_ID0)
+#define bfin_write_CAN1_MB20_ID0(val)		bfin_write16(CAN1_MB20_ID0, val)
+#define bfin_read_CAN1_MB20_ID1()		bfin_read16(CAN1_MB20_ID1)
+#define bfin_write_CAN1_MB20_ID1(val)		bfin_write16(CAN1_MB20_ID1, val)
+#define bfin_read_CAN1_MB21_DATA0()		bfin_read16(CAN1_MB21_DATA0)
+#define bfin_write_CAN1_MB21_DATA0(val)		bfin_write16(CAN1_MB21_DATA0, val)
+#define bfin_read_CAN1_MB21_DATA1()		bfin_read16(CAN1_MB21_DATA1)
+#define bfin_write_CAN1_MB21_DATA1(val)		bfin_write16(CAN1_MB21_DATA1, val)
+#define bfin_read_CAN1_MB21_DATA2()		bfin_read16(CAN1_MB21_DATA2)
+#define bfin_write_CAN1_MB21_DATA2(val)		bfin_write16(CAN1_MB21_DATA2, val)
+#define bfin_read_CAN1_MB21_DATA3()		bfin_read16(CAN1_MB21_DATA3)
+#define bfin_write_CAN1_MB21_DATA3(val)		bfin_write16(CAN1_MB21_DATA3, val)
+#define bfin_read_CAN1_MB21_LENGTH()		bfin_read16(CAN1_MB21_LENGTH)
+#define bfin_write_CAN1_MB21_LENGTH(val)	bfin_write16(CAN1_MB21_LENGTH, val)
+#define bfin_read_CAN1_MB21_TIMESTAMP()		bfin_read16(CAN1_MB21_TIMESTAMP)
+#define bfin_write_CAN1_MB21_TIMESTAMP(val)	bfin_write16(CAN1_MB21_TIMESTAMP, val)
+#define bfin_read_CAN1_MB21_ID0()		bfin_read16(CAN1_MB21_ID0)
+#define bfin_write_CAN1_MB21_ID0(val)		bfin_write16(CAN1_MB21_ID0, val)
+#define bfin_read_CAN1_MB21_ID1()		bfin_read16(CAN1_MB21_ID1)
+#define bfin_write_CAN1_MB21_ID1(val)		bfin_write16(CAN1_MB21_ID1, val)
+#define bfin_read_CAN1_MB22_DATA0()		bfin_read16(CAN1_MB22_DATA0)
+#define bfin_write_CAN1_MB22_DATA0(val)		bfin_write16(CAN1_MB22_DATA0, val)
+#define bfin_read_CAN1_MB22_DATA1()		bfin_read16(CAN1_MB22_DATA1)
+#define bfin_write_CAN1_MB22_DATA1(val)		bfin_write16(CAN1_MB22_DATA1, val)
+#define bfin_read_CAN1_MB22_DATA2()		bfin_read16(CAN1_MB22_DATA2)
+#define bfin_write_CAN1_MB22_DATA2(val)		bfin_write16(CAN1_MB22_DATA2, val)
+#define bfin_read_CAN1_MB22_DATA3()		bfin_read16(CAN1_MB22_DATA3)
+#define bfin_write_CAN1_MB22_DATA3(val)		bfin_write16(CAN1_MB22_DATA3, val)
+#define bfin_read_CAN1_MB22_LENGTH()		bfin_read16(CAN1_MB22_LENGTH)
+#define bfin_write_CAN1_MB22_LENGTH(val)	bfin_write16(CAN1_MB22_LENGTH, val)
+#define bfin_read_CAN1_MB22_TIMESTAMP()		bfin_read16(CAN1_MB22_TIMESTAMP)
+#define bfin_write_CAN1_MB22_TIMESTAMP(val)	bfin_write16(CAN1_MB22_TIMESTAMP, val)
+#define bfin_read_CAN1_MB22_ID0()		bfin_read16(CAN1_MB22_ID0)
+#define bfin_write_CAN1_MB22_ID0(val)		bfin_write16(CAN1_MB22_ID0, val)
+#define bfin_read_CAN1_MB22_ID1()		bfin_read16(CAN1_MB22_ID1)
+#define bfin_write_CAN1_MB22_ID1(val)		bfin_write16(CAN1_MB22_ID1, val)
+#define bfin_read_CAN1_MB23_DATA0()		bfin_read16(CAN1_MB23_DATA0)
+#define bfin_write_CAN1_MB23_DATA0(val)		bfin_write16(CAN1_MB23_DATA0, val)
+#define bfin_read_CAN1_MB23_DATA1()		bfin_read16(CAN1_MB23_DATA1)
+#define bfin_write_CAN1_MB23_DATA1(val)		bfin_write16(CAN1_MB23_DATA1, val)
+#define bfin_read_CAN1_MB23_DATA2()		bfin_read16(CAN1_MB23_DATA2)
+#define bfin_write_CAN1_MB23_DATA2(val)		bfin_write16(CAN1_MB23_DATA2, val)
+#define bfin_read_CAN1_MB23_DATA3()		bfin_read16(CAN1_MB23_DATA3)
+#define bfin_write_CAN1_MB23_DATA3(val)		bfin_write16(CAN1_MB23_DATA3, val)
+#define bfin_read_CAN1_MB23_LENGTH()		bfin_read16(CAN1_MB23_LENGTH)
+#define bfin_write_CAN1_MB23_LENGTH(val)	bfin_write16(CAN1_MB23_LENGTH, val)
+#define bfin_read_CAN1_MB23_TIMESTAMP()		bfin_read16(CAN1_MB23_TIMESTAMP)
+#define bfin_write_CAN1_MB23_TIMESTAMP(val)	bfin_write16(CAN1_MB23_TIMESTAMP, val)
+#define bfin_read_CAN1_MB23_ID0()		bfin_read16(CAN1_MB23_ID0)
+#define bfin_write_CAN1_MB23_ID0(val)		bfin_write16(CAN1_MB23_ID0, val)
+#define bfin_read_CAN1_MB23_ID1()		bfin_read16(CAN1_MB23_ID1)
+#define bfin_write_CAN1_MB23_ID1(val)		bfin_write16(CAN1_MB23_ID1, val)
+#define bfin_read_CAN1_MB24_DATA0()		bfin_read16(CAN1_MB24_DATA0)
+#define bfin_write_CAN1_MB24_DATA0(val)		bfin_write16(CAN1_MB24_DATA0, val)
+#define bfin_read_CAN1_MB24_DATA1()		bfin_read16(CAN1_MB24_DATA1)
+#define bfin_write_CAN1_MB24_DATA1(val)		bfin_write16(CAN1_MB24_DATA1, val)
+#define bfin_read_CAN1_MB24_DATA2()		bfin_read16(CAN1_MB24_DATA2)
+#define bfin_write_CAN1_MB24_DATA2(val)		bfin_write16(CAN1_MB24_DATA2, val)
+#define bfin_read_CAN1_MB24_DATA3()		bfin_read16(CAN1_MB24_DATA3)
+#define bfin_write_CAN1_MB24_DATA3(val)		bfin_write16(CAN1_MB24_DATA3, val)
+#define bfin_read_CAN1_MB24_LENGTH()		bfin_read16(CAN1_MB24_LENGTH)
+#define bfin_write_CAN1_MB24_LENGTH(val)	bfin_write16(CAN1_MB24_LENGTH, val)
+#define bfin_read_CAN1_MB24_TIMESTAMP()		bfin_read16(CAN1_MB24_TIMESTAMP)
+#define bfin_write_CAN1_MB24_TIMESTAMP(val)	bfin_write16(CAN1_MB24_TIMESTAMP, val)
+#define bfin_read_CAN1_MB24_ID0()		bfin_read16(CAN1_MB24_ID0)
+#define bfin_write_CAN1_MB24_ID0(val)		bfin_write16(CAN1_MB24_ID0, val)
+#define bfin_read_CAN1_MB24_ID1()		bfin_read16(CAN1_MB24_ID1)
+#define bfin_write_CAN1_MB24_ID1(val)		bfin_write16(CAN1_MB24_ID1, val)
+#define bfin_read_CAN1_MB25_DATA0()		bfin_read16(CAN1_MB25_DATA0)
+#define bfin_write_CAN1_MB25_DATA0(val)		bfin_write16(CAN1_MB25_DATA0, val)
+#define bfin_read_CAN1_MB25_DATA1()		bfin_read16(CAN1_MB25_DATA1)
+#define bfin_write_CAN1_MB25_DATA1(val)		bfin_write16(CAN1_MB25_DATA1, val)
+#define bfin_read_CAN1_MB25_DATA2()		bfin_read16(CAN1_MB25_DATA2)
+#define bfin_write_CAN1_MB25_DATA2(val)		bfin_write16(CAN1_MB25_DATA2, val)
+#define bfin_read_CAN1_MB25_DATA3()		bfin_read16(CAN1_MB25_DATA3)
+#define bfin_write_CAN1_MB25_DATA3(val)		bfin_write16(CAN1_MB25_DATA3, val)
+#define bfin_read_CAN1_MB25_LENGTH()		bfin_read16(CAN1_MB25_LENGTH)
+#define bfin_write_CAN1_MB25_LENGTH(val)	bfin_write16(CAN1_MB25_LENGTH, val)
+#define bfin_read_CAN1_MB25_TIMESTAMP()		bfin_read16(CAN1_MB25_TIMESTAMP)
+#define bfin_write_CAN1_MB25_TIMESTAMP(val)	bfin_write16(CAN1_MB25_TIMESTAMP, val)
+#define bfin_read_CAN1_MB25_ID0()		bfin_read16(CAN1_MB25_ID0)
+#define bfin_write_CAN1_MB25_ID0(val)		bfin_write16(CAN1_MB25_ID0, val)
+#define bfin_read_CAN1_MB25_ID1()		bfin_read16(CAN1_MB25_ID1)
+#define bfin_write_CAN1_MB25_ID1(val)		bfin_write16(CAN1_MB25_ID1, val)
+#define bfin_read_CAN1_MB26_DATA0()		bfin_read16(CAN1_MB26_DATA0)
+#define bfin_write_CAN1_MB26_DATA0(val)		bfin_write16(CAN1_MB26_DATA0, val)
+#define bfin_read_CAN1_MB26_DATA1()		bfin_read16(CAN1_MB26_DATA1)
+#define bfin_write_CAN1_MB26_DATA1(val)		bfin_write16(CAN1_MB26_DATA1, val)
+#define bfin_read_CAN1_MB26_DATA2()		bfin_read16(CAN1_MB26_DATA2)
+#define bfin_write_CAN1_MB26_DATA2(val)		bfin_write16(CAN1_MB26_DATA2, val)
+#define bfin_read_CAN1_MB26_DATA3()		bfin_read16(CAN1_MB26_DATA3)
+#define bfin_write_CAN1_MB26_DATA3(val)		bfin_write16(CAN1_MB26_DATA3, val)
+#define bfin_read_CAN1_MB26_LENGTH()		bfin_read16(CAN1_MB26_LENGTH)
+#define bfin_write_CAN1_MB26_LENGTH(val)	bfin_write16(CAN1_MB26_LENGTH, val)
+#define bfin_read_CAN1_MB26_TIMESTAMP()		bfin_read16(CAN1_MB26_TIMESTAMP)
+#define bfin_write_CAN1_MB26_TIMESTAMP(val)	bfin_write16(CAN1_MB26_TIMESTAMP, val)
+#define bfin_read_CAN1_MB26_ID0()		bfin_read16(CAN1_MB26_ID0)
+#define bfin_write_CAN1_MB26_ID0(val)		bfin_write16(CAN1_MB26_ID0, val)
+#define bfin_read_CAN1_MB26_ID1()		bfin_read16(CAN1_MB26_ID1)
+#define bfin_write_CAN1_MB26_ID1(val)		bfin_write16(CAN1_MB26_ID1, val)
+#define bfin_read_CAN1_MB27_DATA0()		bfin_read16(CAN1_MB27_DATA0)
+#define bfin_write_CAN1_MB27_DATA0(val)		bfin_write16(CAN1_MB27_DATA0, val)
+#define bfin_read_CAN1_MB27_DATA1()		bfin_read16(CAN1_MB27_DATA1)
+#define bfin_write_CAN1_MB27_DATA1(val)		bfin_write16(CAN1_MB27_DATA1, val)
+#define bfin_read_CAN1_MB27_DATA2()		bfin_read16(CAN1_MB27_DATA2)
+#define bfin_write_CAN1_MB27_DATA2(val)		bfin_write16(CAN1_MB27_DATA2, val)
+#define bfin_read_CAN1_MB27_DATA3()		bfin_read16(CAN1_MB27_DATA3)
+#define bfin_write_CAN1_MB27_DATA3(val)		bfin_write16(CAN1_MB27_DATA3, val)
+#define bfin_read_CAN1_MB27_LENGTH()		bfin_read16(CAN1_MB27_LENGTH)
+#define bfin_write_CAN1_MB27_LENGTH(val)	bfin_write16(CAN1_MB27_LENGTH, val)
+#define bfin_read_CAN1_MB27_TIMESTAMP()		bfin_read16(CAN1_MB27_TIMESTAMP)
+#define bfin_write_CAN1_MB27_TIMESTAMP(val)	bfin_write16(CAN1_MB27_TIMESTAMP, val)
+#define bfin_read_CAN1_MB27_ID0()		bfin_read16(CAN1_MB27_ID0)
+#define bfin_write_CAN1_MB27_ID0(val)		bfin_write16(CAN1_MB27_ID0, val)
+#define bfin_read_CAN1_MB27_ID1()		bfin_read16(CAN1_MB27_ID1)
+#define bfin_write_CAN1_MB27_ID1(val)		bfin_write16(CAN1_MB27_ID1, val)
+#define bfin_read_CAN1_MB28_DATA0()		bfin_read16(CAN1_MB28_DATA0)
+#define bfin_write_CAN1_MB28_DATA0(val)		bfin_write16(CAN1_MB28_DATA0, val)
+#define bfin_read_CAN1_MB28_DATA1()		bfin_read16(CAN1_MB28_DATA1)
+#define bfin_write_CAN1_MB28_DATA1(val)		bfin_write16(CAN1_MB28_DATA1, val)
+#define bfin_read_CAN1_MB28_DATA2()		bfin_read16(CAN1_MB28_DATA2)
+#define bfin_write_CAN1_MB28_DATA2(val)		bfin_write16(CAN1_MB28_DATA2, val)
+#define bfin_read_CAN1_MB28_DATA3()		bfin_read16(CAN1_MB28_DATA3)
+#define bfin_write_CAN1_MB28_DATA3(val)		bfin_write16(CAN1_MB28_DATA3, val)
+#define bfin_read_CAN1_MB28_LENGTH()		bfin_read16(CAN1_MB28_LENGTH)
+#define bfin_write_CAN1_MB28_LENGTH(val)	bfin_write16(CAN1_MB28_LENGTH, val)
+#define bfin_read_CAN1_MB28_TIMESTAMP()		bfin_read16(CAN1_MB28_TIMESTAMP)
+#define bfin_write_CAN1_MB28_TIMESTAMP(val)	bfin_write16(CAN1_MB28_TIMESTAMP, val)
+#define bfin_read_CAN1_MB28_ID0()		bfin_read16(CAN1_MB28_ID0)
+#define bfin_write_CAN1_MB28_ID0(val)		bfin_write16(CAN1_MB28_ID0, val)
+#define bfin_read_CAN1_MB28_ID1()		bfin_read16(CAN1_MB28_ID1)
+#define bfin_write_CAN1_MB28_ID1(val)		bfin_write16(CAN1_MB28_ID1, val)
+#define bfin_read_CAN1_MB29_DATA0()		bfin_read16(CAN1_MB29_DATA0)
+#define bfin_write_CAN1_MB29_DATA0(val)		bfin_write16(CAN1_MB29_DATA0, val)
+#define bfin_read_CAN1_MB29_DATA1()		bfin_read16(CAN1_MB29_DATA1)
+#define bfin_write_CAN1_MB29_DATA1(val)		bfin_write16(CAN1_MB29_DATA1, val)
+#define bfin_read_CAN1_MB29_DATA2()		bfin_read16(CAN1_MB29_DATA2)
+#define bfin_write_CAN1_MB29_DATA2(val)		bfin_write16(CAN1_MB29_DATA2, val)
+#define bfin_read_CAN1_MB29_DATA3()		bfin_read16(CAN1_MB29_DATA3)
+#define bfin_write_CAN1_MB29_DATA3(val)		bfin_write16(CAN1_MB29_DATA3, val)
+#define bfin_read_CAN1_MB29_LENGTH()		bfin_read16(CAN1_MB29_LENGTH)
+#define bfin_write_CAN1_MB29_LENGTH(val)	bfin_write16(CAN1_MB29_LENGTH, val)
+#define bfin_read_CAN1_MB29_TIMESTAMP()		bfin_read16(CAN1_MB29_TIMESTAMP)
+#define bfin_write_CAN1_MB29_TIMESTAMP(val)	bfin_write16(CAN1_MB29_TIMESTAMP, val)
+#define bfin_read_CAN1_MB29_ID0()		bfin_read16(CAN1_MB29_ID0)
+#define bfin_write_CAN1_MB29_ID0(val)		bfin_write16(CAN1_MB29_ID0, val)
+#define bfin_read_CAN1_MB29_ID1()		bfin_read16(CAN1_MB29_ID1)
+#define bfin_write_CAN1_MB29_ID1(val)		bfin_write16(CAN1_MB29_ID1, val)
+#define bfin_read_CAN1_MB30_DATA0()		bfin_read16(CAN1_MB30_DATA0)
+#define bfin_write_CAN1_MB30_DATA0(val)		bfin_write16(CAN1_MB30_DATA0, val)
+#define bfin_read_CAN1_MB30_DATA1()		bfin_read16(CAN1_MB30_DATA1)
+#define bfin_write_CAN1_MB30_DATA1(val)		bfin_write16(CAN1_MB30_DATA1, val)
+#define bfin_read_CAN1_MB30_DATA2()		bfin_read16(CAN1_MB30_DATA2)
+#define bfin_write_CAN1_MB30_DATA2(val)		bfin_write16(CAN1_MB30_DATA2, val)
+#define bfin_read_CAN1_MB30_DATA3()		bfin_read16(CAN1_MB30_DATA3)
+#define bfin_write_CAN1_MB30_DATA3(val)		bfin_write16(CAN1_MB30_DATA3, val)
+#define bfin_read_CAN1_MB30_LENGTH()		bfin_read16(CAN1_MB30_LENGTH)
+#define bfin_write_CAN1_MB30_LENGTH(val)	bfin_write16(CAN1_MB30_LENGTH, val)
+#define bfin_read_CAN1_MB30_TIMESTAMP()		bfin_read16(CAN1_MB30_TIMESTAMP)
+#define bfin_write_CAN1_MB30_TIMESTAMP(val)	bfin_write16(CAN1_MB30_TIMESTAMP, val)
+#define bfin_read_CAN1_MB30_ID0()		bfin_read16(CAN1_MB30_ID0)
+#define bfin_write_CAN1_MB30_ID0(val)		bfin_write16(CAN1_MB30_ID0, val)
+#define bfin_read_CAN1_MB30_ID1()		bfin_read16(CAN1_MB30_ID1)
+#define bfin_write_CAN1_MB30_ID1(val)		bfin_write16(CAN1_MB30_ID1, val)
+#define bfin_read_CAN1_MB31_DATA0()		bfin_read16(CAN1_MB31_DATA0)
+#define bfin_write_CAN1_MB31_DATA0(val)		bfin_write16(CAN1_MB31_DATA0, val)
+#define bfin_read_CAN1_MB31_DATA1()		bfin_read16(CAN1_MB31_DATA1)
+#define bfin_write_CAN1_MB31_DATA1(val)		bfin_write16(CAN1_MB31_DATA1, val)
+#define bfin_read_CAN1_MB31_DATA2()		bfin_read16(CAN1_MB31_DATA2)
+#define bfin_write_CAN1_MB31_DATA2(val)		bfin_write16(CAN1_MB31_DATA2, val)
+#define bfin_read_CAN1_MB31_DATA3()		bfin_read16(CAN1_MB31_DATA3)
+#define bfin_write_CAN1_MB31_DATA3(val)		bfin_write16(CAN1_MB31_DATA3, val)
+#define bfin_read_CAN1_MB31_LENGTH()		bfin_read16(CAN1_MB31_LENGTH)
+#define bfin_write_CAN1_MB31_LENGTH(val)	bfin_write16(CAN1_MB31_LENGTH, val)
+#define bfin_read_CAN1_MB31_TIMESTAMP()		bfin_read16(CAN1_MB31_TIMESTAMP)
+#define bfin_write_CAN1_MB31_TIMESTAMP(val)	bfin_write16(CAN1_MB31_TIMESTAMP, val)
+#define bfin_read_CAN1_MB31_ID0()		bfin_read16(CAN1_MB31_ID0)
+#define bfin_write_CAN1_MB31_ID0(val)		bfin_write16(CAN1_MB31_ID0, val)
+#define bfin_read_CAN1_MB31_ID1()		bfin_read16(CAN1_MB31_ID1)
+#define bfin_write_CAN1_MB31_ID1(val)		bfin_write16(CAN1_MB31_ID1, val)
+
+/* HOST Port Registers */
+
+#define bfin_read_HOST_CONTROL()		bfin_read16(HOST_CONTROL)
+#define bfin_write_HOST_CONTROL(val)		bfin_write16(HOST_CONTROL, val)
+#define bfin_read_HOST_STATUS()		bfin_read16(HOST_STATUS)
+#define bfin_write_HOST_STATUS(val)		bfin_write16(HOST_STATUS, val)
+#define bfin_read_HOST_TIMEOUT()		bfin_read16(HOST_TIMEOUT)
+#define bfin_write_HOST_TIMEOUT(val)		bfin_write16(HOST_TIMEOUT, val)
+
+/* Pixel Combfin_read_()ositor (PIXC) Registers */
+
+#define bfin_read_PIXC_CTL()		bfin_read16(PIXC_CTL)
+#define bfin_write_PIXC_CTL(val)	bfin_write16(PIXC_CTL, val)
+#define bfin_read_PIXC_PPL()		bfin_read16(PIXC_PPL)
+#define bfin_write_PIXC_PPL(val)	bfin_write16(PIXC_PPL, val)
+#define bfin_read_PIXC_LPF()		bfin_read16(PIXC_LPF)
+#define bfin_write_PIXC_LPF(val)	bfin_write16(PIXC_LPF, val)
+#define bfin_read_PIXC_AHSTART()	bfin_read16(PIXC_AHSTART)
+#define bfin_write_PIXC_AHSTART(val)	bfin_write16(PIXC_AHSTART, val)
+#define bfin_read_PIXC_AHEND()		bfin_read16(PIXC_AHEND)
+#define bfin_write_PIXC_AHEND(val)	bfin_write16(PIXC_AHEND, val)
+#define bfin_read_PIXC_AVSTART()	bfin_read16(PIXC_AVSTART)
+#define bfin_write_PIXC_AVSTART(val)	bfin_write16(PIXC_AVSTART, val)
+#define bfin_read_PIXC_AVEND()		bfin_read16(PIXC_AVEND)
+#define bfin_write_PIXC_AVEND(val)	bfin_write16(PIXC_AVEND, val)
+#define bfin_read_PIXC_ATRANSP()	bfin_read16(PIXC_ATRANSP)
+#define bfin_write_PIXC_ATRANSP(val)	bfin_write16(PIXC_ATRANSP, val)
+#define bfin_read_PIXC_BHSTART()	bfin_read16(PIXC_BHSTART)
+#define bfin_write_PIXC_BHSTART(val)	bfin_write16(PIXC_BHSTART, val)
+#define bfin_read_PIXC_BHEND()		bfin_read16(PIXC_BHEND)
+#define bfin_write_PIXC_BHEND(val)	bfin_write16(PIXC_BHEND, val)
+#define bfin_read_PIXC_BVSTART()	bfin_read16(PIXC_BVSTART)
+#define bfin_write_PIXC_BVSTART(val)	bfin_write16(PIXC_BVSTART, val)
+#define bfin_read_PIXC_BVEND()		bfin_read16(PIXC_BVEND)
+#define bfin_write_PIXC_BVEND(val)	bfin_write16(PIXC_BVEND, val)
+#define bfin_read_PIXC_BTRANSP()	bfin_read16(PIXC_BTRANSP)
+#define bfin_write_PIXC_BTRANSP(val)	bfin_write16(PIXC_BTRANSP, val)
+#define bfin_read_PIXC_INTRSTAT()	bfin_read16(PIXC_INTRSTAT)
+#define bfin_write_PIXC_INTRSTAT(val)	bfin_write16(PIXC_INTRSTAT, val)
+#define bfin_read_PIXC_RYCON()		bfin_read32(PIXC_RYCON)
+#define bfin_write_PIXC_RYCON(val)	bfin_write32(PIXC_RYCON, val)
+#define bfin_read_PIXC_GUCON()		bfin_read32(PIXC_GUCON)
+#define bfin_write_PIXC_GUCON(val)	bfin_write32(PIXC_GUCON, val)
+#define bfin_read_PIXC_BVCON()		bfin_read32(PIXC_BVCON)
+#define bfin_write_PIXC_BVCON(val)	bfin_write32(PIXC_BVCON, val)
+#define bfin_read_PIXC_CCBIAS()		bfin_read32(PIXC_CCBIAS)
+#define bfin_write_PIXC_CCBIAS(val)	bfin_write32(PIXC_CCBIAS, val)
+#define bfin_read_PIXC_TC()		bfin_read32(PIXC_TC)
+#define bfin_write_PIXC_TC(val)		bfin_write32(PIXC_TC, val)
+
+/* Handshake MDMA 0 Registers */
+
+#define bfin_read_HMDMA0_CONTROL()		bfin_read16(HMDMA0_CONTROL)
+#define bfin_write_HMDMA0_CONTROL(val)		bfin_write16(HMDMA0_CONTROL, val)
+#define bfin_read_HMDMA0_ECINIT()		bfin_read16(HMDMA0_ECINIT)
+#define bfin_write_HMDMA0_ECINIT(val)		bfin_write16(HMDMA0_ECINIT, val)
+#define bfin_read_HMDMA0_BCINIT()		bfin_read16(HMDMA0_BCINIT)
+#define bfin_write_HMDMA0_BCINIT(val)		bfin_write16(HMDMA0_BCINIT, val)
+#define bfin_read_HMDMA0_ECURGENT()		bfin_read16(HMDMA0_ECURGENT)
+#define bfin_write_HMDMA0_ECURGENT(val)		bfin_write16(HMDMA0_ECURGENT, val)
+#define bfin_read_HMDMA0_ECOVERFLOW()		bfin_read16(HMDMA0_ECOVERFLOW)
+#define bfin_write_HMDMA0_ECOVERFLOW(val)	bfin_write16(HMDMA0_ECOVERFLOW, val)
+#define bfin_read_HMDMA0_ECOUNT()		bfin_read16(HMDMA0_ECOUNT)
+#define bfin_write_HMDMA0_ECOUNT(val)		bfin_write16(HMDMA0_ECOUNT, val)
+#define bfin_read_HMDMA0_BCOUNT()		bfin_read16(HMDMA0_BCOUNT)
+#define bfin_write_HMDMA0_BCOUNT(val)		bfin_write16(HMDMA0_BCOUNT, val)
+
+/* Handshake MDMA 1 Registers */
+
+#define bfin_read_HMDMA1_CONTROL()		bfin_read16(HMDMA1_CONTROL)
+#define bfin_write_HMDMA1_CONTROL(val)		bfin_write16(HMDMA1_CONTROL, val)
+#define bfin_read_HMDMA1_ECINIT()		bfin_read16(HMDMA1_ECINIT)
+#define bfin_write_HMDMA1_ECINIT(val)		bfin_write16(HMDMA1_ECINIT, val)
+#define bfin_read_HMDMA1_BCINIT()		bfin_read16(HMDMA1_BCINIT)
+#define bfin_write_HMDMA1_BCINIT(val)		bfin_write16(HMDMA1_BCINIT, val)
+#define bfin_read_HMDMA1_ECURGENT()		bfin_read16(HMDMA1_ECURGENT)
+#define bfin_write_HMDMA1_ECURGENT(val)		bfin_write16(HMDMA1_ECURGENT, val)
+#define bfin_read_HMDMA1_ECOVERFLOW()		bfin_read16(HMDMA1_ECOVERFLOW)
+#define bfin_write_HMDMA1_ECOVERFLOW(val)	bfin_write16(HMDMA1_ECOVERFLOW, val)
+#define bfin_read_HMDMA1_ECOUNT()		bfin_read16(HMDMA1_ECOUNT)
+#define bfin_write_HMDMA1_ECOUNT(val)		bfin_write16(HMDMA1_ECOUNT, val)
+#define bfin_read_HMDMA1_BCOUNT()		bfin_read16(HMDMA1_BCOUNT)
+#define bfin_write_HMDMA1_BCOUNT(val)		bfin_write16(HMDMA1_BCOUNT, val)
+
+#endif /* _CDEF_BF544_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF547.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
new file mode 100644
index 0000000..be83f64
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
@@ -0,0 +1,796 @@
+/*
+ * Copyright 2008-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _CDEF_BF547_H
+#define _CDEF_BF547_H
+
+/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
+#include "cdefBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF547 that are not in the common header */
+
+/* Timer Registers */
+
+#define bfin_read_TIMER8_CONFIG()	bfin_read16(TIMER8_CONFIG)
+#define bfin_write_TIMER8_CONFIG(val)	bfin_write16(TIMER8_CONFIG, val)
+#define bfin_read_TIMER8_COUNTER()	bfin_read32(TIMER8_COUNTER)
+#define bfin_write_TIMER8_COUNTER(val)	bfin_write32(TIMER8_COUNTER, val)
+#define bfin_read_TIMER8_PERIOD()	bfin_read32(TIMER8_PERIOD)
+#define bfin_write_TIMER8_PERIOD(val)	bfin_write32(TIMER8_PERIOD, val)
+#define bfin_read_TIMER8_WIDTH()	bfin_read32(TIMER8_WIDTH)
+#define bfin_write_TIMER8_WIDTH(val)	bfin_write32(TIMER8_WIDTH, val)
+#define bfin_read_TIMER9_CONFIG()	bfin_read16(TIMER9_CONFIG)
+#define bfin_write_TIMER9_CONFIG(val)	bfin_write16(TIMER9_CONFIG, val)
+#define bfin_read_TIMER9_COUNTER()	bfin_read32(TIMER9_COUNTER)
+#define bfin_write_TIMER9_COUNTER(val)	bfin_write32(TIMER9_COUNTER, val)
+#define bfin_read_TIMER9_PERIOD()	bfin_read32(TIMER9_PERIOD)
+#define bfin_write_TIMER9_PERIOD(val)	bfin_write32(TIMER9_PERIOD, val)
+#define bfin_read_TIMER9_WIDTH()	bfin_read32(TIMER9_WIDTH)
+#define bfin_write_TIMER9_WIDTH(val)	bfin_write32(TIMER9_WIDTH, val)
+#define bfin_read_TIMER10_CONFIG()	bfin_read16(TIMER10_CONFIG)
+#define bfin_write_TIMER10_CONFIG(val)	bfin_write16(TIMER10_CONFIG, val)
+#define bfin_read_TIMER10_COUNTER()	bfin_read32(TIMER10_COUNTER)
+#define bfin_write_TIMER10_COUNTER(val)	bfin_write32(TIMER10_COUNTER, val)
+#define bfin_read_TIMER10_PERIOD()	bfin_read32(TIMER10_PERIOD)
+#define bfin_write_TIMER10_PERIOD(val)	bfin_write32(TIMER10_PERIOD, val)
+#define bfin_read_TIMER10_WIDTH()	bfin_read32(TIMER10_WIDTH)
+#define bfin_write_TIMER10_WIDTH(val)	bfin_write32(TIMER10_WIDTH, val)
+
+/* Timer Groubfin_read_() of 3 */
+
+#define bfin_read_TIMER_ENABLE1()	bfin_read16(TIMER_ENABLE1)
+#define bfin_write_TIMER_ENABLE1(val)	bfin_write16(TIMER_ENABLE1, val)
+#define bfin_read_TIMER_DISABLE1()	bfin_read16(TIMER_DISABLE1)
+#define bfin_write_TIMER_DISABLE1(val)	bfin_write16(TIMER_DISABLE1, val)
+#define bfin_read_TIMER_STATUS1()	bfin_read32(TIMER_STATUS1)
+#define bfin_write_TIMER_STATUS1(val)	bfin_write32(TIMER_STATUS1, val)
+
+/* SPORT0 Registers */
+
+#define bfin_read_SPORT0_TCR1()		bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val)	bfin_write16(SPORT0_TCR1, val)
+#define bfin_read_SPORT0_TCR2()		bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val)	bfin_write16(SPORT0_TCR2, val)
+#define bfin_read_SPORT0_TCLKDIV()	bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val)	bfin_write16(SPORT0_TCLKDIV, val)
+#define bfin_read_SPORT0_TFSDIV()	bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val)	bfin_write16(SPORT0_TFSDIV, val)
+#define bfin_read_SPORT0_TX()		bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val)	bfin_write32(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX()		bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val)	bfin_write32(SPORT0_RX, val)
+#define bfin_read_SPORT0_RCR1()		bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val)	bfin_write16(SPORT0_RCR1, val)
+#define bfin_read_SPORT0_RCR2()		bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val)	bfin_write16(SPORT0_RCR2, val)
+#define bfin_read_SPORT0_RCLKDIV()	bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val)	bfin_write16(SPORT0_RCLKDIV, val)
+#define bfin_read_SPORT0_RFSDIV()	bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val)	bfin_write16(SPORT0_RFSDIV, val)
+#define bfin_read_SPORT0_STAT()		bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val)	bfin_write16(SPORT0_STAT, val)
+#define bfin_read_SPORT0_CHNL()		bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val)	bfin_write16(SPORT0_CHNL, val)
+#define bfin_read_SPORT0_MCMC1()	bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val)	bfin_write16(SPORT0_MCMC1, val)
+#define bfin_read_SPORT0_MCMC2()	bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val)	bfin_write16(SPORT0_MCMC2, val)
+#define bfin_read_SPORT0_MTCS0()	bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val)	bfin_write32(SPORT0_MTCS0, val)
+#define bfin_read_SPORT0_MTCS1()	bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val)	bfin_write32(SPORT0_MTCS1, val)
+#define bfin_read_SPORT0_MTCS2()	bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val)	bfin_write32(SPORT0_MTCS2, val)
+#define bfin_read_SPORT0_MTCS3()	bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val)	bfin_write32(SPORT0_MTCS3, val)
+#define bfin_read_SPORT0_MRCS0()	bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val)	bfin_write32(SPORT0_MRCS0, val)
+#define bfin_read_SPORT0_MRCS1()	bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val)	bfin_write32(SPORT0_MRCS1, val)
+#define bfin_read_SPORT0_MRCS2()	bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val)	bfin_write32(SPORT0_MRCS2, val)
+#define bfin_read_SPORT0_MRCS3()	bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val)	bfin_write32(SPORT0_MRCS3, val)
+
+/* EPPI0 Registers */
+
+#define bfin_read_EPPI0_STATUS()	bfin_read16(EPPI0_STATUS)
+#define bfin_write_EPPI0_STATUS(val)	bfin_write16(EPPI0_STATUS, val)
+#define bfin_read_EPPI0_HCOUNT()	bfin_read16(EPPI0_HCOUNT)
+#define bfin_write_EPPI0_HCOUNT(val)	bfin_write16(EPPI0_HCOUNT, val)
+#define bfin_read_EPPI0_HDELAY()	bfin_read16(EPPI0_HDELAY)
+#define bfin_write_EPPI0_HDELAY(val)	bfin_write16(EPPI0_HDELAY, val)
+#define bfin_read_EPPI0_VCOUNT()	bfin_read16(EPPI0_VCOUNT)
+#define bfin_write_EPPI0_VCOUNT(val)	bfin_write16(EPPI0_VCOUNT, val)
+#define bfin_read_EPPI0_VDELAY()	bfin_read16(EPPI0_VDELAY)
+#define bfin_write_EPPI0_VDELAY(val)	bfin_write16(EPPI0_VDELAY, val)
+#define bfin_read_EPPI0_FRAME()		bfin_read16(EPPI0_FRAME)
+#define bfin_write_EPPI0_FRAME(val)	bfin_write16(EPPI0_FRAME, val)
+#define bfin_read_EPPI0_LINE()		bfin_read16(EPPI0_LINE)
+#define bfin_write_EPPI0_LINE(val)	bfin_write16(EPPI0_LINE, val)
+#define bfin_read_EPPI0_CLKDIV()	bfin_read16(EPPI0_CLKDIV)
+#define bfin_write_EPPI0_CLKDIV(val)	bfin_write16(EPPI0_CLKDIV, val)
+#define bfin_read_EPPI0_CONTROL()	bfin_read32(EPPI0_CONTROL)
+#define bfin_write_EPPI0_CONTROL(val)	bfin_write32(EPPI0_CONTROL, val)
+#define bfin_read_EPPI0_FS1W_HBL()	bfin_read32(EPPI0_FS1W_HBL)
+#define bfin_write_EPPI0_FS1W_HBL(val)	bfin_write32(EPPI0_FS1W_HBL, val)
+#define bfin_read_EPPI0_FS1P_AVPL()	bfin_read32(EPPI0_FS1P_AVPL)
+#define bfin_write_EPPI0_FS1P_AVPL(val)	bfin_write32(EPPI0_FS1P_AVPL, val)
+#define bfin_read_EPPI0_FS2W_LVB()	bfin_read32(EPPI0_FS2W_LVB)
+#define bfin_write_EPPI0_FS2W_LVB(val)	bfin_write32(EPPI0_FS2W_LVB, val)
+#define bfin_read_EPPI0_FS2P_LAVF()	bfin_read32(EPPI0_FS2P_LAVF)
+#define bfin_write_EPPI0_FS2P_LAVF(val)	bfin_write32(EPPI0_FS2P_LAVF, val)
+#define bfin_read_EPPI0_CLIP()		bfin_read32(EPPI0_CLIP)
+#define bfin_write_EPPI0_CLIP(val)	bfin_write32(EPPI0_CLIP, val)
+
+/* UART2 Registers */
+
+#define bfin_read_UART2_DLL()		bfin_read16(UART2_DLL)
+#define bfin_write_UART2_DLL(val)	bfin_write16(UART2_DLL, val)
+#define bfin_read_UART2_DLH()		bfin_read16(UART2_DLH)
+#define bfin_write_UART2_DLH(val)	bfin_write16(UART2_DLH, val)
+#define bfin_read_UART2_GCTL()		bfin_read16(UART2_GCTL)
+#define bfin_write_UART2_GCTL(val)	bfin_write16(UART2_GCTL, val)
+#define bfin_read_UART2_LCR()		bfin_read16(UART2_LCR)
+#define bfin_write_UART2_LCR(val)	bfin_write16(UART2_LCR, val)
+#define bfin_read_UART2_MCR()		bfin_read16(UART2_MCR)
+#define bfin_write_UART2_MCR(val)	bfin_write16(UART2_MCR, val)
+#define bfin_read_UART2_LSR()		bfin_read16(UART2_LSR)
+#define bfin_write_UART2_LSR(val)	bfin_write16(UART2_LSR, val)
+#define bfin_read_UART2_MSR()		bfin_read16(UART2_MSR)
+#define bfin_write_UART2_MSR(val)	bfin_write16(UART2_MSR, val)
+#define bfin_read_UART2_SCR()		bfin_read16(UART2_SCR)
+#define bfin_write_UART2_SCR(val)	bfin_write16(UART2_SCR, val)
+#define bfin_read_UART2_IER_SET()	bfin_read16(UART2_IER_SET)
+#define bfin_write_UART2_IER_SET(val)	bfin_write16(UART2_IER_SET, val)
+#define bfin_read_UART2_IER_CLEAR()	bfin_read16(UART2_IER_CLEAR)
+#define bfin_write_UART2_IER_CLEAR(val)	bfin_write16(UART2_IER_CLEAR, val)
+#define bfin_read_UART2_RBR()		bfin_read16(UART2_RBR)
+#define bfin_write_UART2_RBR(val)	bfin_write16(UART2_RBR, val)
+
+/* Two Wire Interface Registers (TWI1) */
+
+/* SPI2  Registers */
+
+#define bfin_read_SPI2_CTL()		bfin_read16(SPI2_CTL)
+#define bfin_write_SPI2_CTL(val)	bfin_write16(SPI2_CTL, val)
+#define bfin_read_SPI2_FLG()		bfin_read16(SPI2_FLG)
+#define bfin_write_SPI2_FLG(val)	bfin_write16(SPI2_FLG, val)
+#define bfin_read_SPI2_STAT()		bfin_read16(SPI2_STAT)
+#define bfin_write_SPI2_STAT(val)	bfin_write16(SPI2_STAT, val)
+#define bfin_read_SPI2_TDBR()		bfin_read16(SPI2_TDBR)
+#define bfin_write_SPI2_TDBR(val)	bfin_write16(SPI2_TDBR, val)
+#define bfin_read_SPI2_RDBR()		bfin_read16(SPI2_RDBR)
+#define bfin_write_SPI2_RDBR(val)	bfin_write16(SPI2_RDBR, val)
+#define bfin_read_SPI2_BAUD()		bfin_read16(SPI2_BAUD)
+#define bfin_write_SPI2_BAUD(val)	bfin_write16(SPI2_BAUD, val)
+#define bfin_read_SPI2_SHADOW()		bfin_read16(SPI2_SHADOW)
+#define bfin_write_SPI2_SHADOW(val)	bfin_write16(SPI2_SHADOW, val)
+
+/* ATAPI Registers */
+
+#define bfin_read_ATAPI_CONTROL()		bfin_read16(ATAPI_CONTROL)
+#define bfin_write_ATAPI_CONTROL(val)		bfin_write16(ATAPI_CONTROL, val)
+#define bfin_read_ATAPI_STATUS()		bfin_read16(ATAPI_STATUS)
+#define bfin_write_ATAPI_STATUS(val)		bfin_write16(ATAPI_STATUS, val)
+#define bfin_read_ATAPI_DEV_ADDR()		bfin_read16(ATAPI_DEV_ADDR)
+#define bfin_write_ATAPI_DEV_ADDR(val)		bfin_write16(ATAPI_DEV_ADDR, val)
+#define bfin_read_ATAPI_DEV_TXBUF()		bfin_read16(ATAPI_DEV_TXBUF)
+#define bfin_write_ATAPI_DEV_TXBUF(val)		bfin_write16(ATAPI_DEV_TXBUF, val)
+#define bfin_read_ATAPI_DEV_RXBUF()		bfin_read16(ATAPI_DEV_RXBUF)
+#define bfin_write_ATAPI_DEV_RXBUF(val)		bfin_write16(ATAPI_DEV_RXBUF, val)
+#define bfin_read_ATAPI_INT_MASK()		bfin_read16(ATAPI_INT_MASK)
+#define bfin_write_ATAPI_INT_MASK(val)		bfin_write16(ATAPI_INT_MASK, val)
+#define bfin_read_ATAPI_INT_STATUS()		bfin_read16(ATAPI_INT_STATUS)
+#define bfin_write_ATAPI_INT_STATUS(val)	bfin_write16(ATAPI_INT_STATUS, val)
+#define bfin_read_ATAPI_XFER_LEN()		bfin_read16(ATAPI_XFER_LEN)
+#define bfin_write_ATAPI_XFER_LEN(val)		bfin_write16(ATAPI_XFER_LEN, val)
+#define bfin_read_ATAPI_LINE_STATUS()		bfin_read16(ATAPI_LINE_STATUS)
+#define bfin_write_ATAPI_LINE_STATUS(val)	bfin_write16(ATAPI_LINE_STATUS, val)
+#define bfin_read_ATAPI_SM_STATE()		bfin_read16(ATAPI_SM_STATE)
+#define bfin_write_ATAPI_SM_STATE(val)		bfin_write16(ATAPI_SM_STATE, val)
+#define bfin_read_ATAPI_TERMINATE()		bfin_read16(ATAPI_TERMINATE)
+#define bfin_write_ATAPI_TERMINATE(val)		bfin_write16(ATAPI_TERMINATE, val)
+#define bfin_read_ATAPI_PIO_TFRCNT()		bfin_read16(ATAPI_PIO_TFRCNT)
+#define bfin_write_ATAPI_PIO_TFRCNT(val)	bfin_write16(ATAPI_PIO_TFRCNT, val)
+#define bfin_read_ATAPI_DMA_TFRCNT()		bfin_read16(ATAPI_DMA_TFRCNT)
+#define bfin_write_ATAPI_DMA_TFRCNT(val)	bfin_write16(ATAPI_DMA_TFRCNT, val)
+#define bfin_read_ATAPI_UMAIN_TFRCNT()		bfin_read16(ATAPI_UMAIN_TFRCNT)
+#define bfin_write_ATAPI_UMAIN_TFRCNT(val)	bfin_write16(ATAPI_UMAIN_TFRCNT, val)
+#define bfin_read_ATAPI_UDMAOUT_TFRCNT()	bfin_read16(ATAPI_UDMAOUT_TFRCNT)
+#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val)	bfin_write16(ATAPI_UDMAOUT_TFRCNT, val)
+#define bfin_read_ATAPI_REG_TIM_0()		bfin_read16(ATAPI_REG_TIM_0)
+#define bfin_write_ATAPI_REG_TIM_0(val)		bfin_write16(ATAPI_REG_TIM_0, val)
+#define bfin_read_ATAPI_PIO_TIM_0()		bfin_read16(ATAPI_PIO_TIM_0)
+#define bfin_write_ATAPI_PIO_TIM_0(val)		bfin_write16(ATAPI_PIO_TIM_0, val)
+#define bfin_read_ATAPI_PIO_TIM_1()		bfin_read16(ATAPI_PIO_TIM_1)
+#define bfin_write_ATAPI_PIO_TIM_1(val)		bfin_write16(ATAPI_PIO_TIM_1, val)
+#define bfin_read_ATAPI_MULTI_TIM_0()		bfin_read16(ATAPI_MULTI_TIM_0)
+#define bfin_write_ATAPI_MULTI_TIM_0(val)	bfin_write16(ATAPI_MULTI_TIM_0, val)
+#define bfin_read_ATAPI_MULTI_TIM_1()		bfin_read16(ATAPI_MULTI_TIM_1)
+#define bfin_write_ATAPI_MULTI_TIM_1(val)	bfin_write16(ATAPI_MULTI_TIM_1, val)
+#define bfin_read_ATAPI_MULTI_TIM_2()		bfin_read16(ATAPI_MULTI_TIM_2)
+#define bfin_write_ATAPI_MULTI_TIM_2(val)	bfin_write16(ATAPI_MULTI_TIM_2, val)
+#define bfin_read_ATAPI_ULTRA_TIM_0()		bfin_read16(ATAPI_ULTRA_TIM_0)
+#define bfin_write_ATAPI_ULTRA_TIM_0(val)	bfin_write16(ATAPI_ULTRA_TIM_0, val)
+#define bfin_read_ATAPI_ULTRA_TIM_1()		bfin_read16(ATAPI_ULTRA_TIM_1)
+#define bfin_write_ATAPI_ULTRA_TIM_1(val)	bfin_write16(ATAPI_ULTRA_TIM_1, val)
+#define bfin_read_ATAPI_ULTRA_TIM_2()		bfin_read16(ATAPI_ULTRA_TIM_2)
+#define bfin_write_ATAPI_ULTRA_TIM_2(val)	bfin_write16(ATAPI_ULTRA_TIM_2, val)
+#define bfin_read_ATAPI_ULTRA_TIM_3()		bfin_read16(ATAPI_ULTRA_TIM_3)
+#define bfin_write_ATAPI_ULTRA_TIM_3(val)	bfin_write16(ATAPI_ULTRA_TIM_3, val)
+
+/* SDH Registers */
+
+#define bfin_read_SDH_PWR_CTL()		bfin_read16(SDH_PWR_CTL)
+#define bfin_write_SDH_PWR_CTL(val)	bfin_write16(SDH_PWR_CTL, val)
+#define bfin_read_SDH_CLK_CTL()		bfin_read16(SDH_CLK_CTL)
+#define bfin_write_SDH_CLK_CTL(val)	bfin_write16(SDH_CLK_CTL, val)
+#define bfin_read_SDH_ARGUMENT()	bfin_read32(SDH_ARGUMENT)
+#define bfin_write_SDH_ARGUMENT(val)	bfin_write32(SDH_ARGUMENT, val)
+#define bfin_read_SDH_COMMAND()		bfin_read16(SDH_COMMAND)
+#define bfin_write_SDH_COMMAND(val)	bfin_write16(SDH_COMMAND, val)
+#define bfin_read_SDH_RESP_CMD()	bfin_read16(SDH_RESP_CMD)
+#define bfin_write_SDH_RESP_CMD(val)	bfin_write16(SDH_RESP_CMD, val)
+#define bfin_read_SDH_RESPONSE0()	bfin_read32(SDH_RESPONSE0)
+#define bfin_write_SDH_RESPONSE0(val)	bfin_write32(SDH_RESPONSE0, val)
+#define bfin_read_SDH_RESPONSE1()	bfin_read32(SDH_RESPONSE1)
+#define bfin_write_SDH_RESPONSE1(val)	bfin_write32(SDH_RESPONSE1, val)
+#define bfin_read_SDH_RESPONSE2()	bfin_read32(SDH_RESPONSE2)
+#define bfin_write_SDH_RESPONSE2(val)	bfin_write32(SDH_RESPONSE2, val)
+#define bfin_read_SDH_RESPONSE3()	bfin_read32(SDH_RESPONSE3)
+#define bfin_write_SDH_RESPONSE3(val)	bfin_write32(SDH_RESPONSE3, val)
+#define bfin_read_SDH_DATA_TIMER()	bfin_read32(SDH_DATA_TIMER)
+#define bfin_write_SDH_DATA_TIMER(val)	bfin_write32(SDH_DATA_TIMER, val)
+#define bfin_read_SDH_DATA_LGTH()	bfin_read16(SDH_DATA_LGTH)
+#define bfin_write_SDH_DATA_LGTH(val)	bfin_write16(SDH_DATA_LGTH, val)
+#define bfin_read_SDH_DATA_CTL()	bfin_read16(SDH_DATA_CTL)
+#define bfin_write_SDH_DATA_CTL(val)	bfin_write16(SDH_DATA_CTL, val)
+#define bfin_read_SDH_DATA_CNT()	bfin_read16(SDH_DATA_CNT)
+#define bfin_write_SDH_DATA_CNT(val)	bfin_write16(SDH_DATA_CNT, val)
+#define bfin_read_SDH_STATUS()		bfin_read32(SDH_STATUS)
+#define bfin_write_SDH_STATUS(val)	bfin_write32(SDH_STATUS, val)
+#define bfin_read_SDH_STATUS_CLR()	bfin_read16(SDH_STATUS_CLR)
+#define bfin_write_SDH_STATUS_CLR(val)	bfin_write16(SDH_STATUS_CLR, val)
+#define bfin_read_SDH_MASK0()		bfin_read32(SDH_MASK0)
+#define bfin_write_SDH_MASK0(val)	bfin_write32(SDH_MASK0, val)
+#define bfin_read_SDH_MASK1()		bfin_read32(SDH_MASK1)
+#define bfin_write_SDH_MASK1(val)	bfin_write32(SDH_MASK1, val)
+#define bfin_read_SDH_FIFO_CNT()	bfin_read16(SDH_FIFO_CNT)
+#define bfin_write_SDH_FIFO_CNT(val)	bfin_write16(SDH_FIFO_CNT, val)
+#define bfin_read_SDH_FIFO()		bfin_read32(SDH_FIFO)
+#define bfin_write_SDH_FIFO(val)	bfin_write32(SDH_FIFO, val)
+#define bfin_read_SDH_E_STATUS()	bfin_read16(SDH_E_STATUS)
+#define bfin_write_SDH_E_STATUS(val)	bfin_write16(SDH_E_STATUS, val)
+#define bfin_read_SDH_E_MASK()		bfin_read16(SDH_E_MASK)
+#define bfin_write_SDH_E_MASK(val)	bfin_write16(SDH_E_MASK, val)
+#define bfin_read_SDH_CFG()		bfin_read16(SDH_CFG)
+#define bfin_write_SDH_CFG(val)		bfin_write16(SDH_CFG, val)
+#define bfin_read_SDH_RD_WAIT_EN()	bfin_read16(SDH_RD_WAIT_EN)
+#define bfin_write_SDH_RD_WAIT_EN(val)	bfin_write16(SDH_RD_WAIT_EN, val)
+#define bfin_read_SDH_PID0()		bfin_read16(SDH_PID0)
+#define bfin_write_SDH_PID0(val)	bfin_write16(SDH_PID0, val)
+#define bfin_read_SDH_PID1()		bfin_read16(SDH_PID1)
+#define bfin_write_SDH_PID1(val)	bfin_write16(SDH_PID1, val)
+#define bfin_read_SDH_PID2()		bfin_read16(SDH_PID2)
+#define bfin_write_SDH_PID2(val)	bfin_write16(SDH_PID2, val)
+#define bfin_read_SDH_PID3()		bfin_read16(SDH_PID3)
+#define bfin_write_SDH_PID3(val)	bfin_write16(SDH_PID3, val)
+#define bfin_read_SDH_PID4()		bfin_read16(SDH_PID4)
+#define bfin_write_SDH_PID4(val)	bfin_write16(SDH_PID4, val)
+#define bfin_read_SDH_PID5()		bfin_read16(SDH_PID5)
+#define bfin_write_SDH_PID5(val)	bfin_write16(SDH_PID5, val)
+#define bfin_read_SDH_PID6()		bfin_read16(SDH_PID6)
+#define bfin_write_SDH_PID6(val)	bfin_write16(SDH_PID6, val)
+#define bfin_read_SDH_PID7()		bfin_read16(SDH_PID7)
+#define bfin_write_SDH_PID7(val)	bfin_write16(SDH_PID7, val)
+
+/* HOST Port Registers */
+
+#define bfin_read_HOST_CONTROL()	bfin_read16(HOST_CONTROL)
+#define bfin_write_HOST_CONTROL(val)	bfin_write16(HOST_CONTROL, val)
+#define bfin_read_HOST_STATUS()		bfin_read16(HOST_STATUS)
+#define bfin_write_HOST_STATUS(val)	bfin_write16(HOST_STATUS, val)
+#define bfin_read_HOST_TIMEOUT()	bfin_read16(HOST_TIMEOUT)
+#define bfin_write_HOST_TIMEOUT(val)	bfin_write16(HOST_TIMEOUT, val)
+
+/* USB Control Registers */
+
+#define bfin_read_USB_FADDR()		bfin_read16(USB_FADDR)
+#define bfin_write_USB_FADDR(val)	bfin_write16(USB_FADDR, val)
+#define bfin_read_USB_POWER()		bfin_read16(USB_POWER)
+#define bfin_write_USB_POWER(val)	bfin_write16(USB_POWER, val)
+#define bfin_read_USB_INTRTX()		bfin_read16(USB_INTRTX)
+#define bfin_write_USB_INTRTX(val)	bfin_write16(USB_INTRTX, val)
+#define bfin_read_USB_INTRRX()		bfin_read16(USB_INTRRX)
+#define bfin_write_USB_INTRRX(val)	bfin_write16(USB_INTRRX, val)
+#define bfin_read_USB_INTRTXE()		bfin_read16(USB_INTRTXE)
+#define bfin_write_USB_INTRTXE(val)	bfin_write16(USB_INTRTXE, val)
+#define bfin_read_USB_INTRRXE()		bfin_read16(USB_INTRRXE)
+#define bfin_write_USB_INTRRXE(val)	bfin_write16(USB_INTRRXE, val)
+#define bfin_read_USB_INTRUSB()		bfin_read16(USB_INTRUSB)
+#define bfin_write_USB_INTRUSB(val)	bfin_write16(USB_INTRUSB, val)
+#define bfin_read_USB_INTRUSBE()	bfin_read16(USB_INTRUSBE)
+#define bfin_write_USB_INTRUSBE(val)	bfin_write16(USB_INTRUSBE, val)
+#define bfin_read_USB_FRAME()		bfin_read16(USB_FRAME)
+#define bfin_write_USB_FRAME(val)	bfin_write16(USB_FRAME, val)
+#define bfin_read_USB_INDEX()		bfin_read16(USB_INDEX)
+#define bfin_write_USB_INDEX(val)	bfin_write16(USB_INDEX, val)
+#define bfin_read_USB_TESTMODE()	bfin_read16(USB_TESTMODE)
+#define bfin_write_USB_TESTMODE(val)	bfin_write16(USB_TESTMODE, val)
+#define bfin_read_USB_GLOBINTR()	bfin_read16(USB_GLOBINTR)
+#define bfin_write_USB_GLOBINTR(val)	bfin_write16(USB_GLOBINTR, val)
+#define bfin_read_USB_GLOBAL_CTL()	bfin_read16(USB_GLOBAL_CTL)
+#define bfin_write_USB_GLOBAL_CTL(val)		bfin_write16(USB_GLOBAL_CTL, val)
+
+/* USB Packet Control Registers */
+
+#define bfin_read_USB_TX_MAX_PACKET()		bfin_read16(USB_TX_MAX_PACKET)
+#define bfin_write_USB_TX_MAX_PACKET(val)	bfin_write16(USB_TX_MAX_PACKET, val)
+#define bfin_read_USB_CSR0()		bfin_read16(USB_CSR0)
+#define bfin_write_USB_CSR0(val)	bfin_write16(USB_CSR0, val)
+#define bfin_read_USB_TXCSR()		bfin_read16(USB_TXCSR)
+#define bfin_write_USB_TXCSR(val)	bfin_write16(USB_TXCSR, val)
+#define bfin_read_USB_RX_MAX_PACKET()		bfin_read16(USB_RX_MAX_PACKET)
+#define bfin_write_USB_RX_MAX_PACKET(val)	bfin_write16(USB_RX_MAX_PACKET, val)
+#define bfin_read_USB_RXCSR()		bfin_read16(USB_RXCSR)
+#define bfin_write_USB_RXCSR(val)	bfin_write16(USB_RXCSR, val)
+#define bfin_read_USB_COUNT0()		bfin_read16(USB_COUNT0)
+#define bfin_write_USB_COUNT0(val)	bfin_write16(USB_COUNT0, val)
+#define bfin_read_USB_RXCOUNT()		bfin_read16(USB_RXCOUNT)
+#define bfin_write_USB_RXCOUNT(val)	bfin_write16(USB_RXCOUNT, val)
+#define bfin_read_USB_TXTYPE()		bfin_read16(USB_TXTYPE)
+#define bfin_write_USB_TXTYPE(val)	bfin_write16(USB_TXTYPE, val)
+#define bfin_read_USB_NAKLIMIT0()	bfin_read16(USB_NAKLIMIT0)
+#define bfin_write_USB_NAKLIMIT0(val)	bfin_write16(USB_NAKLIMIT0, val)
+#define bfin_read_USB_TXINTERVAL()	bfin_read16(USB_TXINTERVAL)
+#define bfin_write_USB_TXINTERVAL(val)	bfin_write16(USB_TXINTERVAL, val)
+#define bfin_read_USB_RXTYPE()		bfin_read16(USB_RXTYPE)
+#define bfin_write_USB_RXTYPE(val)	bfin_write16(USB_RXTYPE, val)
+#define bfin_read_USB_RXINTERVAL()	bfin_read16(USB_RXINTERVAL)
+#define bfin_write_USB_RXINTERVAL(val)	bfin_write16(USB_RXINTERVAL, val)
+#define bfin_read_USB_TXCOUNT()		bfin_read16(USB_TXCOUNT)
+#define bfin_write_USB_TXCOUNT(val)	bfin_write16(USB_TXCOUNT, val)
+
+/* USB Endbfin_read_()oint FIFO Registers */
+
+#define bfin_read_USB_EP0_FIFO()	bfin_read16(USB_EP0_FIFO)
+#define bfin_write_USB_EP0_FIFO(val)	bfin_write16(USB_EP0_FIFO, val)
+#define bfin_read_USB_EP1_FIFO()	bfin_read16(USB_EP1_FIFO)
+#define bfin_write_USB_EP1_FIFO(val)	bfin_write16(USB_EP1_FIFO, val)
+#define bfin_read_USB_EP2_FIFO()	bfin_read16(USB_EP2_FIFO)
+#define bfin_write_USB_EP2_FIFO(val)	bfin_write16(USB_EP2_FIFO, val)
+#define bfin_read_USB_EP3_FIFO()	bfin_read16(USB_EP3_FIFO)
+#define bfin_write_USB_EP3_FIFO(val)	bfin_write16(USB_EP3_FIFO, val)
+#define bfin_read_USB_EP4_FIFO()	bfin_read16(USB_EP4_FIFO)
+#define bfin_write_USB_EP4_FIFO(val)	bfin_write16(USB_EP4_FIFO, val)
+#define bfin_read_USB_EP5_FIFO()	bfin_read16(USB_EP5_FIFO)
+#define bfin_write_USB_EP5_FIFO(val)	bfin_write16(USB_EP5_FIFO, val)
+#define bfin_read_USB_EP6_FIFO()	bfin_read16(USB_EP6_FIFO)
+#define bfin_write_USB_EP6_FIFO(val)	bfin_write16(USB_EP6_FIFO, val)
+#define bfin_read_USB_EP7_FIFO()	bfin_read16(USB_EP7_FIFO)
+#define bfin_write_USB_EP7_FIFO(val)	bfin_write16(USB_EP7_FIFO, val)
+
+/* USB OTG Control Registers */
+
+#define bfin_read_USB_OTG_DEV_CTL()		bfin_read16(USB_OTG_DEV_CTL)
+#define bfin_write_USB_OTG_DEV_CTL(val)		bfin_write16(USB_OTG_DEV_CTL, val)
+#define bfin_read_USB_OTG_VBUS_IRQ()		bfin_read16(USB_OTG_VBUS_IRQ)
+#define bfin_write_USB_OTG_VBUS_IRQ(val)	bfin_write16(USB_OTG_VBUS_IRQ, val)
+#define bfin_read_USB_OTG_VBUS_MASK()		bfin_read16(USB_OTG_VBUS_MASK)
+#define bfin_write_USB_OTG_VBUS_MASK(val)	bfin_write16(USB_OTG_VBUS_MASK, val)
+
+/* USB Phy Control Registers */
+
+#define bfin_read_USB_LINKINFO()	bfin_read16(USB_LINKINFO)
+#define bfin_write_USB_LINKINFO(val)	bfin_write16(USB_LINKINFO, val)
+#define bfin_read_USB_VPLEN()		bfin_read16(USB_VPLEN)
+#define bfin_write_USB_VPLEN(val)	bfin_write16(USB_VPLEN, val)
+#define bfin_read_USB_HS_EOF1()		bfin_read16(USB_HS_EOF1)
+#define bfin_write_USB_HS_EOF1(val)	bfin_write16(USB_HS_EOF1, val)
+#define bfin_read_USB_FS_EOF1()		bfin_read16(USB_FS_EOF1)
+#define bfin_write_USB_FS_EOF1(val)	bfin_write16(USB_FS_EOF1, val)
+#define bfin_read_USB_LS_EOF1()		bfin_read16(USB_LS_EOF1)
+#define bfin_write_USB_LS_EOF1(val)	bfin_write16(USB_LS_EOF1, val)
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CNTRL()		bfin_read16(USB_APHY_CNTRL)
+#define bfin_write_USB_APHY_CNTRL(val)		bfin_write16(USB_APHY_CNTRL, val)
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CALIB()		bfin_read16(USB_APHY_CALIB)
+#define bfin_write_USB_APHY_CALIB(val)		bfin_write16(USB_APHY_CALIB, val)
+#define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
+#define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
+
+#define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
+#define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
+#define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)
+#define bfin_write_USB_SRP_CLKDIV(val)		bfin_write16(USB_SRP_CLKDIV, val)
+
+/* USB Endbfin_read_()oint 0 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXMAXP()		bfin_read16(USB_EP_NI0_TXMAXP)
+#define bfin_write_USB_EP_NI0_TXMAXP(val)	bfin_write16(USB_EP_NI0_TXMAXP, val)
+#define bfin_read_USB_EP_NI0_TXCSR()		bfin_read16(USB_EP_NI0_TXCSR)
+#define bfin_write_USB_EP_NI0_TXCSR(val)	bfin_write16(USB_EP_NI0_TXCSR, val)
+#define bfin_read_USB_EP_NI0_RXMAXP()		bfin_read16(USB_EP_NI0_RXMAXP)
+#define bfin_write_USB_EP_NI0_RXMAXP(val)	bfin_write16(USB_EP_NI0_RXMAXP, val)
+#define bfin_read_USB_EP_NI0_RXCSR()		bfin_read16(USB_EP_NI0_RXCSR)
+#define bfin_write_USB_EP_NI0_RXCSR(val)	bfin_write16(USB_EP_NI0_RXCSR, val)
+#define bfin_read_USB_EP_NI0_RXCOUNT()		bfin_read16(USB_EP_NI0_RXCOUNT)
+#define bfin_write_USB_EP_NI0_RXCOUNT(val)	bfin_write16(USB_EP_NI0_RXCOUNT, val)
+#define bfin_read_USB_EP_NI0_TXTYPE()		bfin_read16(USB_EP_NI0_TXTYPE)
+#define bfin_write_USB_EP_NI0_TXTYPE(val)	bfin_write16(USB_EP_NI0_TXTYPE, val)
+#define bfin_read_USB_EP_NI0_TXINTERVAL()	bfin_read16(USB_EP_NI0_TXINTERVAL)
+#define bfin_write_USB_EP_NI0_TXINTERVAL(val)	bfin_write16(USB_EP_NI0_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI0_RXTYPE()		bfin_read16(USB_EP_NI0_RXTYPE)
+#define bfin_write_USB_EP_NI0_RXTYPE(val)	bfin_write16(USB_EP_NI0_RXTYPE, val)
+#define bfin_read_USB_EP_NI0_RXINTERVAL()	bfin_read16(USB_EP_NI0_RXINTERVAL)
+#define bfin_write_USB_EP_NI0_RXINTERVAL(val)	bfin_write16(USB_EP_NI0_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 1 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXCOUNT()		bfin_read16(USB_EP_NI0_TXCOUNT)
+#define bfin_write_USB_EP_NI0_TXCOUNT(val)	bfin_write16(USB_EP_NI0_TXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXMAXP()		bfin_read16(USB_EP_NI1_TXMAXP)
+#define bfin_write_USB_EP_NI1_TXMAXP(val)	bfin_write16(USB_EP_NI1_TXMAXP, val)
+#define bfin_read_USB_EP_NI1_TXCSR()		bfin_read16(USB_EP_NI1_TXCSR)
+#define bfin_write_USB_EP_NI1_TXCSR(val)	bfin_write16(USB_EP_NI1_TXCSR, val)
+#define bfin_read_USB_EP_NI1_RXMAXP()		bfin_read16(USB_EP_NI1_RXMAXP)
+#define bfin_write_USB_EP_NI1_RXMAXP(val)	bfin_write16(USB_EP_NI1_RXMAXP, val)
+#define bfin_read_USB_EP_NI1_RXCSR()		bfin_read16(USB_EP_NI1_RXCSR)
+#define bfin_write_USB_EP_NI1_RXCSR(val)	bfin_write16(USB_EP_NI1_RXCSR, val)
+#define bfin_read_USB_EP_NI1_RXCOUNT()		bfin_read16(USB_EP_NI1_RXCOUNT)
+#define bfin_write_USB_EP_NI1_RXCOUNT(val)	bfin_write16(USB_EP_NI1_RXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXTYPE()		bfin_read16(USB_EP_NI1_TXTYPE)
+#define bfin_write_USB_EP_NI1_TXTYPE(val)	bfin_write16(USB_EP_NI1_TXTYPE, val)
+#define bfin_read_USB_EP_NI1_TXINTERVAL()	bfin_read16(USB_EP_NI1_TXINTERVAL)
+#define bfin_write_USB_EP_NI1_TXINTERVAL(val)	bfin_write16(USB_EP_NI1_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI1_RXTYPE()		bfin_read16(USB_EP_NI1_RXTYPE)
+#define bfin_write_USB_EP_NI1_RXTYPE(val)	bfin_write16(USB_EP_NI1_RXTYPE, val)
+#define bfin_read_USB_EP_NI1_RXINTERVAL()	bfin_read16(USB_EP_NI1_RXINTERVAL)
+#define bfin_write_USB_EP_NI1_RXINTERVAL(val)	bfin_write16(USB_EP_NI1_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 2 Control Registers */
+
+#define bfin_read_USB_EP_NI1_TXCOUNT()		bfin_read16(USB_EP_NI1_TXCOUNT)
+#define bfin_write_USB_EP_NI1_TXCOUNT(val)	bfin_write16(USB_EP_NI1_TXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXMAXP()		bfin_read16(USB_EP_NI2_TXMAXP)
+#define bfin_write_USB_EP_NI2_TXMAXP(val)	bfin_write16(USB_EP_NI2_TXMAXP, val)
+#define bfin_read_USB_EP_NI2_TXCSR()		bfin_read16(USB_EP_NI2_TXCSR)
+#define bfin_write_USB_EP_NI2_TXCSR(val)	bfin_write16(USB_EP_NI2_TXCSR, val)
+#define bfin_read_USB_EP_NI2_RXMAXP()		bfin_read16(USB_EP_NI2_RXMAXP)
+#define bfin_write_USB_EP_NI2_RXMAXP(val)	bfin_write16(USB_EP_NI2_RXMAXP, val)
+#define bfin_read_USB_EP_NI2_RXCSR()		bfin_read16(USB_EP_NI2_RXCSR)
+#define bfin_write_USB_EP_NI2_RXCSR(val)	bfin_write16(USB_EP_NI2_RXCSR, val)
+#define bfin_read_USB_EP_NI2_RXCOUNT()		bfin_read16(USB_EP_NI2_RXCOUNT)
+#define bfin_write_USB_EP_NI2_RXCOUNT(val)	bfin_write16(USB_EP_NI2_RXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXTYPE()		bfin_read16(USB_EP_NI2_TXTYPE)
+#define bfin_write_USB_EP_NI2_TXTYPE(val)	bfin_write16(USB_EP_NI2_TXTYPE, val)
+#define bfin_read_USB_EP_NI2_TXINTERVAL()	bfin_read16(USB_EP_NI2_TXINTERVAL)
+#define bfin_write_USB_EP_NI2_TXINTERVAL(val)	bfin_write16(USB_EP_NI2_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI2_RXTYPE()		bfin_read16(USB_EP_NI2_RXTYPE)
+#define bfin_write_USB_EP_NI2_RXTYPE(val)	bfin_write16(USB_EP_NI2_RXTYPE, val)
+#define bfin_read_USB_EP_NI2_RXINTERVAL()	bfin_read16(USB_EP_NI2_RXINTERVAL)
+#define bfin_write_USB_EP_NI2_RXINTERVAL(val)	bfin_write16(USB_EP_NI2_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 3 Control Registers */
+
+#define bfin_read_USB_EP_NI2_TXCOUNT()		bfin_read16(USB_EP_NI2_TXCOUNT)
+#define bfin_write_USB_EP_NI2_TXCOUNT(val)	bfin_write16(USB_EP_NI2_TXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXMAXP()		bfin_read16(USB_EP_NI3_TXMAXP)
+#define bfin_write_USB_EP_NI3_TXMAXP(val)	bfin_write16(USB_EP_NI3_TXMAXP, val)
+#define bfin_read_USB_EP_NI3_TXCSR()		bfin_read16(USB_EP_NI3_TXCSR)
+#define bfin_write_USB_EP_NI3_TXCSR(val)	bfin_write16(USB_EP_NI3_TXCSR, val)
+#define bfin_read_USB_EP_NI3_RXMAXP()		bfin_read16(USB_EP_NI3_RXMAXP)
+#define bfin_write_USB_EP_NI3_RXMAXP(val)	bfin_write16(USB_EP_NI3_RXMAXP, val)
+#define bfin_read_USB_EP_NI3_RXCSR()		bfin_read16(USB_EP_NI3_RXCSR)
+#define bfin_write_USB_EP_NI3_RXCSR(val)	bfin_write16(USB_EP_NI3_RXCSR, val)
+#define bfin_read_USB_EP_NI3_RXCOUNT()		bfin_read16(USB_EP_NI3_RXCOUNT)
+#define bfin_write_USB_EP_NI3_RXCOUNT(val)	bfin_write16(USB_EP_NI3_RXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXTYPE()		bfin_read16(USB_EP_NI3_TXTYPE)
+#define bfin_write_USB_EP_NI3_TXTYPE(val)	bfin_write16(USB_EP_NI3_TXTYPE, val)
+#define bfin_read_USB_EP_NI3_TXINTERVAL()	bfin_read16(USB_EP_NI3_TXINTERVAL)
+#define bfin_write_USB_EP_NI3_TXINTERVAL(val)	bfin_write16(USB_EP_NI3_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI3_RXTYPE()		bfin_read16(USB_EP_NI3_RXTYPE)
+#define bfin_write_USB_EP_NI3_RXTYPE(val)	bfin_write16(USB_EP_NI3_RXTYPE, val)
+#define bfin_read_USB_EP_NI3_RXINTERVAL()	bfin_read16(USB_EP_NI3_RXINTERVAL)
+#define bfin_write_USB_EP_NI3_RXINTERVAL(val)	bfin_write16(USB_EP_NI3_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 4 Control Registers */
+
+#define bfin_read_USB_EP_NI3_TXCOUNT()		bfin_read16(USB_EP_NI3_TXCOUNT)
+#define bfin_write_USB_EP_NI3_TXCOUNT(val)	bfin_write16(USB_EP_NI3_TXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXMAXP()		bfin_read16(USB_EP_NI4_TXMAXP)
+#define bfin_write_USB_EP_NI4_TXMAXP(val)	bfin_write16(USB_EP_NI4_TXMAXP, val)
+#define bfin_read_USB_EP_NI4_TXCSR()		bfin_read16(USB_EP_NI4_TXCSR)
+#define bfin_write_USB_EP_NI4_TXCSR(val)	bfin_write16(USB_EP_NI4_TXCSR, val)
+#define bfin_read_USB_EP_NI4_RXMAXP()		bfin_read16(USB_EP_NI4_RXMAXP)
+#define bfin_write_USB_EP_NI4_RXMAXP(val)	bfin_write16(USB_EP_NI4_RXMAXP, val)
+#define bfin_read_USB_EP_NI4_RXCSR()		bfin_read16(USB_EP_NI4_RXCSR)
+#define bfin_write_USB_EP_NI4_RXCSR(val)	bfin_write16(USB_EP_NI4_RXCSR, val)
+#define bfin_read_USB_EP_NI4_RXCOUNT()		bfin_read16(USB_EP_NI4_RXCOUNT)
+#define bfin_write_USB_EP_NI4_RXCOUNT(val)	bfin_write16(USB_EP_NI4_RXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXTYPE()		bfin_read16(USB_EP_NI4_TXTYPE)
+#define bfin_write_USB_EP_NI4_TXTYPE(val)	bfin_write16(USB_EP_NI4_TXTYPE, val)
+#define bfin_read_USB_EP_NI4_TXINTERVAL()	bfin_read16(USB_EP_NI4_TXINTERVAL)
+#define bfin_write_USB_EP_NI4_TXINTERVAL(val)	bfin_write16(USB_EP_NI4_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI4_RXTYPE()		bfin_read16(USB_EP_NI4_RXTYPE)
+#define bfin_write_USB_EP_NI4_RXTYPE(val)	bfin_write16(USB_EP_NI4_RXTYPE, val)
+#define bfin_read_USB_EP_NI4_RXINTERVAL()	bfin_read16(USB_EP_NI4_RXINTERVAL)
+#define bfin_write_USB_EP_NI4_RXINTERVAL(val)	bfin_write16(USB_EP_NI4_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 5 Control Registers */
+
+#define bfin_read_USB_EP_NI4_TXCOUNT()		bfin_read16(USB_EP_NI4_TXCOUNT)
+#define bfin_write_USB_EP_NI4_TXCOUNT(val)	bfin_write16(USB_EP_NI4_TXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXMAXP()		bfin_read16(USB_EP_NI5_TXMAXP)
+#define bfin_write_USB_EP_NI5_TXMAXP(val)	bfin_write16(USB_EP_NI5_TXMAXP, val)
+#define bfin_read_USB_EP_NI5_TXCSR()		bfin_read16(USB_EP_NI5_TXCSR)
+#define bfin_write_USB_EP_NI5_TXCSR(val)	bfin_write16(USB_EP_NI5_TXCSR, val)
+#define bfin_read_USB_EP_NI5_RXMAXP()		bfin_read16(USB_EP_NI5_RXMAXP)
+#define bfin_write_USB_EP_NI5_RXMAXP(val)	bfin_write16(USB_EP_NI5_RXMAXP, val)
+#define bfin_read_USB_EP_NI5_RXCSR()		bfin_read16(USB_EP_NI5_RXCSR)
+#define bfin_write_USB_EP_NI5_RXCSR(val)	bfin_write16(USB_EP_NI5_RXCSR, val)
+#define bfin_read_USB_EP_NI5_RXCOUNT()		bfin_read16(USB_EP_NI5_RXCOUNT)
+#define bfin_write_USB_EP_NI5_RXCOUNT(val)	bfin_write16(USB_EP_NI5_RXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXTYPE()		bfin_read16(USB_EP_NI5_TXTYPE)
+#define bfin_write_USB_EP_NI5_TXTYPE(val)	bfin_write16(USB_EP_NI5_TXTYPE, val)
+#define bfin_read_USB_EP_NI5_TXINTERVAL()	bfin_read16(USB_EP_NI5_TXINTERVAL)
+#define bfin_write_USB_EP_NI5_TXINTERVAL(val)	bfin_write16(USB_EP_NI5_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI5_RXTYPE()		bfin_read16(USB_EP_NI5_RXTYPE)
+#define bfin_write_USB_EP_NI5_RXTYPE(val)	bfin_write16(USB_EP_NI5_RXTYPE, val)
+#define bfin_read_USB_EP_NI5_RXINTERVAL()	bfin_read16(USB_EP_NI5_RXINTERVAL)
+#define bfin_write_USB_EP_NI5_RXINTERVAL(val)	bfin_write16(USB_EP_NI5_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 6 Control Registers */
+
+#define bfin_read_USB_EP_NI5_TXCOUNT()		bfin_read16(USB_EP_NI5_TXCOUNT)
+#define bfin_write_USB_EP_NI5_TXCOUNT(val)	bfin_write16(USB_EP_NI5_TXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXMAXP()		bfin_read16(USB_EP_NI6_TXMAXP)
+#define bfin_write_USB_EP_NI6_TXMAXP(val)	bfin_write16(USB_EP_NI6_TXMAXP, val)
+#define bfin_read_USB_EP_NI6_TXCSR()		bfin_read16(USB_EP_NI6_TXCSR)
+#define bfin_write_USB_EP_NI6_TXCSR(val)	bfin_write16(USB_EP_NI6_TXCSR, val)
+#define bfin_read_USB_EP_NI6_RXMAXP()		bfin_read16(USB_EP_NI6_RXMAXP)
+#define bfin_write_USB_EP_NI6_RXMAXP(val)	bfin_write16(USB_EP_NI6_RXMAXP, val)
+#define bfin_read_USB_EP_NI6_RXCSR()		bfin_read16(USB_EP_NI6_RXCSR)
+#define bfin_write_USB_EP_NI6_RXCSR(val)	bfin_write16(USB_EP_NI6_RXCSR, val)
+#define bfin_read_USB_EP_NI6_RXCOUNT()		bfin_read16(USB_EP_NI6_RXCOUNT)
+#define bfin_write_USB_EP_NI6_RXCOUNT(val)	bfin_write16(USB_EP_NI6_RXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXTYPE()		bfin_read16(USB_EP_NI6_TXTYPE)
+#define bfin_write_USB_EP_NI6_TXTYPE(val)	bfin_write16(USB_EP_NI6_TXTYPE, val)
+#define bfin_read_USB_EP_NI6_TXINTERVAL()	bfin_read16(USB_EP_NI6_TXINTERVAL)
+#define bfin_write_USB_EP_NI6_TXINTERVAL(val)	bfin_write16(USB_EP_NI6_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI6_RXTYPE()		bfin_read16(USB_EP_NI6_RXTYPE)
+#define bfin_write_USB_EP_NI6_RXTYPE(val)	bfin_write16(USB_EP_NI6_RXTYPE, val)
+#define bfin_read_USB_EP_NI6_RXINTERVAL()	bfin_read16(USB_EP_NI6_RXINTERVAL)
+#define bfin_write_USB_EP_NI6_RXINTERVAL(val)	bfin_write16(USB_EP_NI6_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 7 Control Registers */
+
+#define bfin_read_USB_EP_NI6_TXCOUNT()		bfin_read16(USB_EP_NI6_TXCOUNT)
+#define bfin_write_USB_EP_NI6_TXCOUNT(val)	bfin_write16(USB_EP_NI6_TXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXMAXP()		bfin_read16(USB_EP_NI7_TXMAXP)
+#define bfin_write_USB_EP_NI7_TXMAXP(val)	bfin_write16(USB_EP_NI7_TXMAXP, val)
+#define bfin_read_USB_EP_NI7_TXCSR()		bfin_read16(USB_EP_NI7_TXCSR)
+#define bfin_write_USB_EP_NI7_TXCSR(val)	bfin_write16(USB_EP_NI7_TXCSR, val)
+#define bfin_read_USB_EP_NI7_RXMAXP()		bfin_read16(USB_EP_NI7_RXMAXP)
+#define bfin_write_USB_EP_NI7_RXMAXP(val)	bfin_write16(USB_EP_NI7_RXMAXP, val)
+#define bfin_read_USB_EP_NI7_RXCSR()		bfin_read16(USB_EP_NI7_RXCSR)
+#define bfin_write_USB_EP_NI7_RXCSR(val)	bfin_write16(USB_EP_NI7_RXCSR, val)
+#define bfin_read_USB_EP_NI7_RXCOUNT()		bfin_read16(USB_EP_NI7_RXCOUNT)
+#define bfin_write_USB_EP_NI7_RXCOUNT(val)	bfin_write16(USB_EP_NI7_RXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXTYPE()		bfin_read16(USB_EP_NI7_TXTYPE)
+#define bfin_write_USB_EP_NI7_TXTYPE(val)	bfin_write16(USB_EP_NI7_TXTYPE, val)
+#define bfin_read_USB_EP_NI7_TXINTERVAL()	bfin_read16(USB_EP_NI7_TXINTERVAL)
+#define bfin_write_USB_EP_NI7_TXINTERVAL(val)	bfin_write16(USB_EP_NI7_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_RXTYPE()		bfin_read16(USB_EP_NI7_RXTYPE)
+#define bfin_write_USB_EP_NI7_RXTYPE(val)	bfin_write16(USB_EP_NI7_RXTYPE, val)
+#define bfin_read_USB_EP_NI7_RXINTERVAL()	bfin_read16(USB_EP_NI7_RXINTERVAL)
+#define bfin_write_USB_EP_NI7_RXINTERVAL(val)	bfin_write16(USB_EP_NI7_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_TXCOUNT()		bfin_read16(USB_EP_NI7_TXCOUNT)
+#define bfin_write_USB_EP_NI7_TXCOUNT(val)	bfin_write16(USB_EP_NI7_TXCOUNT, val)
+#define bfin_read_USB_DMA_INTERRUPT()		bfin_read16(USB_DMA_INTERRUPT)
+#define bfin_write_USB_DMA_INTERRUPT(val)	bfin_write16(USB_DMA_INTERRUPT, val)
+
+/* USB Channel 0 Config Registers */
+
+#define bfin_read_USB_DMA0CONTROL()		bfin_read16(USB_DMA0CONTROL)
+#define bfin_write_USB_DMA0CONTROL(val)		bfin_write16(USB_DMA0CONTROL, val)
+#define bfin_read_USB_DMA0ADDRLOW()		bfin_read16(USB_DMA0ADDRLOW)
+#define bfin_write_USB_DMA0ADDRLOW(val)		bfin_write16(USB_DMA0ADDRLOW, val)
+#define bfin_read_USB_DMA0ADDRHIGH()		bfin_read16(USB_DMA0ADDRHIGH)
+#define bfin_write_USB_DMA0ADDRHIGH(val)	bfin_write16(USB_DMA0ADDRHIGH, val)
+#define bfin_read_USB_DMA0COUNTLOW()		bfin_read16(USB_DMA0COUNTLOW)
+#define bfin_write_USB_DMA0COUNTLOW(val)	bfin_write16(USB_DMA0COUNTLOW, val)
+#define bfin_read_USB_DMA0COUNTHIGH()		bfin_read16(USB_DMA0COUNTHIGH)
+#define bfin_write_USB_DMA0COUNTHIGH(val)	bfin_write16(USB_DMA0COUNTHIGH, val)
+
+/* USB Channel 1 Config Registers */
+
+#define bfin_read_USB_DMA1CONTROL()		bfin_read16(USB_DMA1CONTROL)
+#define bfin_write_USB_DMA1CONTROL(val)		bfin_write16(USB_DMA1CONTROL, val)
+#define bfin_read_USB_DMA1ADDRLOW()		bfin_read16(USB_DMA1ADDRLOW)
+#define bfin_write_USB_DMA1ADDRLOW(val)		bfin_write16(USB_DMA1ADDRLOW, val)
+#define bfin_read_USB_DMA1ADDRHIGH()		bfin_read16(USB_DMA1ADDRHIGH)
+#define bfin_write_USB_DMA1ADDRHIGH(val)	bfin_write16(USB_DMA1ADDRHIGH, val)
+#define bfin_read_USB_DMA1COUNTLOW()		bfin_read16(USB_DMA1COUNTLOW)
+#define bfin_write_USB_DMA1COUNTLOW(val)	bfin_write16(USB_DMA1COUNTLOW, val)
+#define bfin_read_USB_DMA1COUNTHIGH()		bfin_read16(USB_DMA1COUNTHIGH)
+#define bfin_write_USB_DMA1COUNTHIGH(val)	bfin_write16(USB_DMA1COUNTHIGH, val)
+
+/* USB Channel 2 Config Registers */
+
+#define bfin_read_USB_DMA2CONTROL()		bfin_read16(USB_DMA2CONTROL)
+#define bfin_write_USB_DMA2CONTROL(val)		bfin_write16(USB_DMA2CONTROL, val)
+#define bfin_read_USB_DMA2ADDRLOW()		bfin_read16(USB_DMA2ADDRLOW)
+#define bfin_write_USB_DMA2ADDRLOW(val)		bfin_write16(USB_DMA2ADDRLOW, val)
+#define bfin_read_USB_DMA2ADDRHIGH()		bfin_read16(USB_DMA2ADDRHIGH)
+#define bfin_write_USB_DMA2ADDRHIGH(val)	bfin_write16(USB_DMA2ADDRHIGH, val)
+#define bfin_read_USB_DMA2COUNTLOW()		bfin_read16(USB_DMA2COUNTLOW)
+#define bfin_write_USB_DMA2COUNTLOW(val)	bfin_write16(USB_DMA2COUNTLOW, val)
+#define bfin_read_USB_DMA2COUNTHIGH()		bfin_read16(USB_DMA2COUNTHIGH)
+#define bfin_write_USB_DMA2COUNTHIGH(val)	bfin_write16(USB_DMA2COUNTHIGH, val)
+
+/* USB Channel 3 Config Registers */
+
+#define bfin_read_USB_DMA3CONTROL()		bfin_read16(USB_DMA3CONTROL)
+#define bfin_write_USB_DMA3CONTROL(val)		bfin_write16(USB_DMA3CONTROL, val)
+#define bfin_read_USB_DMA3ADDRLOW()		bfin_read16(USB_DMA3ADDRLOW)
+#define bfin_write_USB_DMA3ADDRLOW(val)		bfin_write16(USB_DMA3ADDRLOW, val)
+#define bfin_read_USB_DMA3ADDRHIGH()		bfin_read16(USB_DMA3ADDRHIGH)
+#define bfin_write_USB_DMA3ADDRHIGH(val)	bfin_write16(USB_DMA3ADDRHIGH, val)
+#define bfin_read_USB_DMA3COUNTLOW()		bfin_read16(USB_DMA3COUNTLOW)
+#define bfin_write_USB_DMA3COUNTLOW(val)	bfin_write16(USB_DMA3COUNTLOW, val)
+#define bfin_read_USB_DMA3COUNTHIGH()		bfin_read16(USB_DMA3COUNTHIGH)
+#define bfin_write_USB_DMA3COUNTHIGH(val)	bfin_write16(USB_DMA3COUNTHIGH, val)
+
+/* USB Channel 4 Config Registers */
+
+#define bfin_read_USB_DMA4CONTROL()		bfin_read16(USB_DMA4CONTROL)
+#define bfin_write_USB_DMA4CONTROL(val)		bfin_write16(USB_DMA4CONTROL, val)
+#define bfin_read_USB_DMA4ADDRLOW()		bfin_read16(USB_DMA4ADDRLOW)
+#define bfin_write_USB_DMA4ADDRLOW(val)		bfin_write16(USB_DMA4ADDRLOW, val)
+#define bfin_read_USB_DMA4ADDRHIGH()		bfin_read16(USB_DMA4ADDRHIGH)
+#define bfin_write_USB_DMA4ADDRHIGH(val)	bfin_write16(USB_DMA4ADDRHIGH, val)
+#define bfin_read_USB_DMA4COUNTLOW()		bfin_read16(USB_DMA4COUNTLOW)
+#define bfin_write_USB_DMA4COUNTLOW(val)	bfin_write16(USB_DMA4COUNTLOW, val)
+#define bfin_read_USB_DMA4COUNTHIGH()		bfin_read16(USB_DMA4COUNTHIGH)
+#define bfin_write_USB_DMA4COUNTHIGH(val)	bfin_write16(USB_DMA4COUNTHIGH, val)
+
+/* USB Channel 5 Config Registers */
+
+#define bfin_read_USB_DMA5CONTROL()		bfin_read16(USB_DMA5CONTROL)
+#define bfin_write_USB_DMA5CONTROL(val)		bfin_write16(USB_DMA5CONTROL, val)
+#define bfin_read_USB_DMA5ADDRLOW()		bfin_read16(USB_DMA5ADDRLOW)
+#define bfin_write_USB_DMA5ADDRLOW(val)		bfin_write16(USB_DMA5ADDRLOW, val)
+#define bfin_read_USB_DMA5ADDRHIGH()		bfin_read16(USB_DMA5ADDRHIGH)
+#define bfin_write_USB_DMA5ADDRHIGH(val)	bfin_write16(USB_DMA5ADDRHIGH, val)
+#define bfin_read_USB_DMA5COUNTLOW()		bfin_read16(USB_DMA5COUNTLOW)
+#define bfin_write_USB_DMA5COUNTLOW(val)	bfin_write16(USB_DMA5COUNTLOW, val)
+#define bfin_read_USB_DMA5COUNTHIGH()		bfin_read16(USB_DMA5COUNTHIGH)
+#define bfin_write_USB_DMA5COUNTHIGH(val)	bfin_write16(USB_DMA5COUNTHIGH, val)
+
+/* USB Channel 6 Config Registers */
+
+#define bfin_read_USB_DMA6CONTROL()		bfin_read16(USB_DMA6CONTROL)
+#define bfin_write_USB_DMA6CONTROL(val)		bfin_write16(USB_DMA6CONTROL, val)
+#define bfin_read_USB_DMA6ADDRLOW()		bfin_read16(USB_DMA6ADDRLOW)
+#define bfin_write_USB_DMA6ADDRLOW(val)		bfin_write16(USB_DMA6ADDRLOW, val)
+#define bfin_read_USB_DMA6ADDRHIGH()		bfin_read16(USB_DMA6ADDRHIGH)
+#define bfin_write_USB_DMA6ADDRHIGH(val)	bfin_write16(USB_DMA6ADDRHIGH, val)
+#define bfin_read_USB_DMA6COUNTLOW()		bfin_read16(USB_DMA6COUNTLOW)
+#define bfin_write_USB_DMA6COUNTLOW(val)	bfin_write16(USB_DMA6COUNTLOW, val)
+#define bfin_read_USB_DMA6COUNTHIGH()		bfin_read16(USB_DMA6COUNTHIGH)
+#define bfin_write_USB_DMA6COUNTHIGH(val)	bfin_write16(USB_DMA6COUNTHIGH, val)
+
+/* USB Channel 7 Config Registers */
+
+#define bfin_read_USB_DMA7CONTROL()		bfin_read16(USB_DMA7CONTROL)
+#define bfin_write_USB_DMA7CONTROL(val)		bfin_write16(USB_DMA7CONTROL, val)
+#define bfin_read_USB_DMA7ADDRLOW()		bfin_read16(USB_DMA7ADDRLOW)
+#define bfin_write_USB_DMA7ADDRLOW(val)		bfin_write16(USB_DMA7ADDRLOW, val)
+#define bfin_read_USB_DMA7ADDRHIGH()		bfin_read16(USB_DMA7ADDRHIGH)
+#define bfin_write_USB_DMA7ADDRHIGH(val)	bfin_write16(USB_DMA7ADDRHIGH, val)
+#define bfin_read_USB_DMA7COUNTLOW()		bfin_read16(USB_DMA7COUNTLOW)
+#define bfin_write_USB_DMA7COUNTLOW(val)	bfin_write16(USB_DMA7COUNTLOW, val)
+#define bfin_read_USB_DMA7COUNTHIGH()		bfin_read16(USB_DMA7COUNTHIGH)
+#define bfin_write_USB_DMA7COUNTHIGH(val)	bfin_write16(USB_DMA7COUNTHIGH, val)
+
+/* Keybfin_read_()ad Registers */
+
+#define bfin_read_KPAD_CTL()		bfin_read16(KPAD_CTL)
+#define bfin_write_KPAD_CTL(val)	bfin_write16(KPAD_CTL, val)
+#define bfin_read_KPAD_PRESCALE()	bfin_read16(KPAD_PRESCALE)
+#define bfin_write_KPAD_PRESCALE(val)	bfin_write16(KPAD_PRESCALE, val)
+#define bfin_read_KPAD_MSEL()		bfin_read16(KPAD_MSEL)
+#define bfin_write_KPAD_MSEL(val)	bfin_write16(KPAD_MSEL, val)
+#define bfin_read_KPAD_ROWCOL()		bfin_read16(KPAD_ROWCOL)
+#define bfin_write_KPAD_ROWCOL(val)	bfin_write16(KPAD_ROWCOL, val)
+#define bfin_read_KPAD_STAT()		bfin_read16(KPAD_STAT)
+#define bfin_write_KPAD_STAT(val)	bfin_write16(KPAD_STAT, val)
+#define bfin_read_KPAD_SOFTEVAL()	bfin_read16(KPAD_SOFTEVAL)
+#define bfin_write_KPAD_SOFTEVAL(val)	bfin_write16(KPAD_SOFTEVAL, val)
+
+/* Pixel Combfin_read_()ositor (PIXC) Registers */
+
+#define bfin_read_PIXC_CTL()		bfin_read16(PIXC_CTL)
+#define bfin_write_PIXC_CTL(val)	bfin_write16(PIXC_CTL, val)
+#define bfin_read_PIXC_PPL()		bfin_read16(PIXC_PPL)
+#define bfin_write_PIXC_PPL(val)	bfin_write16(PIXC_PPL, val)
+#define bfin_read_PIXC_LPF()		bfin_read16(PIXC_LPF)
+#define bfin_write_PIXC_LPF(val)	bfin_write16(PIXC_LPF, val)
+#define bfin_read_PIXC_AHSTART()	bfin_read16(PIXC_AHSTART)
+#define bfin_write_PIXC_AHSTART(val)	bfin_write16(PIXC_AHSTART, val)
+#define bfin_read_PIXC_AHEND()		bfin_read16(PIXC_AHEND)
+#define bfin_write_PIXC_AHEND(val)	bfin_write16(PIXC_AHEND, val)
+#define bfin_read_PIXC_AVSTART()	bfin_read16(PIXC_AVSTART)
+#define bfin_write_PIXC_AVSTART(val)	bfin_write16(PIXC_AVSTART, val)
+#define bfin_read_PIXC_AVEND()		bfin_read16(PIXC_AVEND)
+#define bfin_write_PIXC_AVEND(val)	bfin_write16(PIXC_AVEND, val)
+#define bfin_read_PIXC_ATRANSP()	bfin_read16(PIXC_ATRANSP)
+#define bfin_write_PIXC_ATRANSP(val)	bfin_write16(PIXC_ATRANSP, val)
+#define bfin_read_PIXC_BHSTART()	bfin_read16(PIXC_BHSTART)
+#define bfin_write_PIXC_BHSTART(val)	bfin_write16(PIXC_BHSTART, val)
+#define bfin_read_PIXC_BHEND()		bfin_read16(PIXC_BHEND)
+#define bfin_write_PIXC_BHEND(val)	bfin_write16(PIXC_BHEND, val)
+#define bfin_read_PIXC_BVSTART()	bfin_read16(PIXC_BVSTART)
+#define bfin_write_PIXC_BVSTART(val)	bfin_write16(PIXC_BVSTART, val)
+#define bfin_read_PIXC_BVEND()		bfin_read16(PIXC_BVEND)
+#define bfin_write_PIXC_BVEND(val)	bfin_write16(PIXC_BVEND, val)
+#define bfin_read_PIXC_BTRANSP()	bfin_read16(PIXC_BTRANSP)
+#define bfin_write_PIXC_BTRANSP(val)	bfin_write16(PIXC_BTRANSP, val)
+#define bfin_read_PIXC_INTRSTAT()	bfin_read16(PIXC_INTRSTAT)
+#define bfin_write_PIXC_INTRSTAT(val)	bfin_write16(PIXC_INTRSTAT, val)
+#define bfin_read_PIXC_RYCON()		bfin_read32(PIXC_RYCON)
+#define bfin_write_PIXC_RYCON(val)	bfin_write32(PIXC_RYCON, val)
+#define bfin_read_PIXC_GUCON()		bfin_read32(PIXC_GUCON)
+#define bfin_write_PIXC_GUCON(val)	bfin_write32(PIXC_GUCON, val)
+#define bfin_read_PIXC_BVCON()		bfin_read32(PIXC_BVCON)
+#define bfin_write_PIXC_BVCON(val)	bfin_write32(PIXC_BVCON, val)
+#define bfin_read_PIXC_CCBIAS()		bfin_read32(PIXC_CCBIAS)
+#define bfin_write_PIXC_CCBIAS(val)	bfin_write32(PIXC_CCBIAS, val)
+#define bfin_read_PIXC_TC()		bfin_read32(PIXC_TC)
+#define bfin_write_PIXC_TC(val)		bfin_write32(PIXC_TC, val)
+
+/* Handshake MDMA 0 Registers */
+
+#define bfin_read_HMDMA0_CONTROL()		bfin_read16(HMDMA0_CONTROL)
+#define bfin_write_HMDMA0_CONTROL(val)		bfin_write16(HMDMA0_CONTROL, val)
+#define bfin_read_HMDMA0_ECINIT()		bfin_read16(HMDMA0_ECINIT)
+#define bfin_write_HMDMA0_ECINIT(val)		bfin_write16(HMDMA0_ECINIT, val)
+#define bfin_read_HMDMA0_BCINIT()		bfin_read16(HMDMA0_BCINIT)
+#define bfin_write_HMDMA0_BCINIT(val)		bfin_write16(HMDMA0_BCINIT, val)
+#define bfin_read_HMDMA0_ECURGENT()		bfin_read16(HMDMA0_ECURGENT)
+#define bfin_write_HMDMA0_ECURGENT(val)		bfin_write16(HMDMA0_ECURGENT, val)
+#define bfin_read_HMDMA0_ECOVERFLOW()		bfin_read16(HMDMA0_ECOVERFLOW)
+#define bfin_write_HMDMA0_ECOVERFLOW(val)	bfin_write16(HMDMA0_ECOVERFLOW, val)
+#define bfin_read_HMDMA0_ECOUNT()		bfin_read16(HMDMA0_ECOUNT)
+#define bfin_write_HMDMA0_ECOUNT(val)		bfin_write16(HMDMA0_ECOUNT, val)
+#define bfin_read_HMDMA0_BCOUNT()		bfin_read16(HMDMA0_BCOUNT)
+#define bfin_write_HMDMA0_BCOUNT(val)		bfin_write16(HMDMA0_BCOUNT, val)
+
+/* Handshake MDMA 1 Registers */
+
+#define bfin_read_HMDMA1_CONTROL()		bfin_read16(HMDMA1_CONTROL)
+#define bfin_write_HMDMA1_CONTROL(val)		bfin_write16(HMDMA1_CONTROL, val)
+#define bfin_read_HMDMA1_ECINIT()		bfin_read16(HMDMA1_ECINIT)
+#define bfin_write_HMDMA1_ECINIT(val)		bfin_write16(HMDMA1_ECINIT, val)
+#define bfin_read_HMDMA1_BCINIT()		bfin_read16(HMDMA1_BCINIT)
+#define bfin_write_HMDMA1_BCINIT(val)		bfin_write16(HMDMA1_BCINIT, val)
+#define bfin_read_HMDMA1_ECURGENT()		bfin_read16(HMDMA1_ECURGENT)
+#define bfin_write_HMDMA1_ECURGENT(val)		bfin_write16(HMDMA1_ECURGENT, val)
+#define bfin_read_HMDMA1_ECOVERFLOW()		bfin_read16(HMDMA1_ECOVERFLOW)
+#define bfin_write_HMDMA1_ECOVERFLOW(val)	bfin_write16(HMDMA1_ECOVERFLOW, val)
+#define bfin_read_HMDMA1_ECOUNT()		bfin_read16(HMDMA1_ECOUNT)
+#define bfin_write_HMDMA1_ECOUNT(val)		bfin_write16(HMDMA1_ECOUNT, val)
+#define bfin_read_HMDMA1_BCOUNT()		bfin_read16(HMDMA1_BCOUNT)
+#define bfin_write_HMDMA1_BCOUNT(val)		bfin_write16(HMDMA1_BCOUNT, val)
+
+#endif /* _CDEF_BF547_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF548.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
new file mode 100644
index 0000000..bae67a6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
@@ -0,0 +1,761 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _CDEF_BF548_H
+#define _CDEF_BF548_H
+
+/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
+#include "cdefBF54x_base.h"
+
+/* The BF548 is like the BF547, but has additional CANs */
+#include "cdefBF547.h"
+
+/* CAN Controller 1 Config 1 Registers */
+
+#define bfin_read_CAN1_MC1()		bfin_read16(CAN1_MC1)
+#define bfin_write_CAN1_MC1(val)	bfin_write16(CAN1_MC1, val)
+#define bfin_read_CAN1_MD1()		bfin_read16(CAN1_MD1)
+#define bfin_write_CAN1_MD1(val)	bfin_write16(CAN1_MD1, val)
+#define bfin_read_CAN1_TRS1()		bfin_read16(CAN1_TRS1)
+#define bfin_write_CAN1_TRS1(val)	bfin_write16(CAN1_TRS1, val)
+#define bfin_read_CAN1_TRR1()		bfin_read16(CAN1_TRR1)
+#define bfin_write_CAN1_TRR1(val)	bfin_write16(CAN1_TRR1, val)
+#define bfin_read_CAN1_TA1()		bfin_read16(CAN1_TA1)
+#define bfin_write_CAN1_TA1(val)	bfin_write16(CAN1_TA1, val)
+#define bfin_read_CAN1_AA1()		bfin_read16(CAN1_AA1)
+#define bfin_write_CAN1_AA1(val)	bfin_write16(CAN1_AA1, val)
+#define bfin_read_CAN1_RMP1()		bfin_read16(CAN1_RMP1)
+#define bfin_write_CAN1_RMP1(val)	bfin_write16(CAN1_RMP1, val)
+#define bfin_read_CAN1_RML1()		bfin_read16(CAN1_RML1)
+#define bfin_write_CAN1_RML1(val)	bfin_write16(CAN1_RML1, val)
+#define bfin_read_CAN1_MBTIF1()		bfin_read16(CAN1_MBTIF1)
+#define bfin_write_CAN1_MBTIF1(val)	bfin_write16(CAN1_MBTIF1, val)
+#define bfin_read_CAN1_MBRIF1()		bfin_read16(CAN1_MBRIF1)
+#define bfin_write_CAN1_MBRIF1(val)	bfin_write16(CAN1_MBRIF1, val)
+#define bfin_read_CAN1_MBIM1()		bfin_read16(CAN1_MBIM1)
+#define bfin_write_CAN1_MBIM1(val)	bfin_write16(CAN1_MBIM1, val)
+#define bfin_read_CAN1_RFH1()		bfin_read16(CAN1_RFH1)
+#define bfin_write_CAN1_RFH1(val)	bfin_write16(CAN1_RFH1, val)
+#define bfin_read_CAN1_OPSS1()		bfin_read16(CAN1_OPSS1)
+#define bfin_write_CAN1_OPSS1(val)	bfin_write16(CAN1_OPSS1, val)
+
+/* CAN Controller 1 Config 2 Registers */
+
+#define bfin_read_CAN1_MC2()		bfin_read16(CAN1_MC2)
+#define bfin_write_CAN1_MC2(val)	bfin_write16(CAN1_MC2, val)
+#define bfin_read_CAN1_MD2()		bfin_read16(CAN1_MD2)
+#define bfin_write_CAN1_MD2(val)	bfin_write16(CAN1_MD2, val)
+#define bfin_read_CAN1_TRS2()		bfin_read16(CAN1_TRS2)
+#define bfin_write_CAN1_TRS2(val)	bfin_write16(CAN1_TRS2, val)
+#define bfin_read_CAN1_TRR2()		bfin_read16(CAN1_TRR2)
+#define bfin_write_CAN1_TRR2(val)	bfin_write16(CAN1_TRR2, val)
+#define bfin_read_CAN1_TA2()		bfin_read16(CAN1_TA2)
+#define bfin_write_CAN1_TA2(val)	bfin_write16(CAN1_TA2, val)
+#define bfin_read_CAN1_AA2()		bfin_read16(CAN1_AA2)
+#define bfin_write_CAN1_AA2(val)	bfin_write16(CAN1_AA2, val)
+#define bfin_read_CAN1_RMP2()		bfin_read16(CAN1_RMP2)
+#define bfin_write_CAN1_RMP2(val)	bfin_write16(CAN1_RMP2, val)
+#define bfin_read_CAN1_RML2()		bfin_read16(CAN1_RML2)
+#define bfin_write_CAN1_RML2(val)	bfin_write16(CAN1_RML2, val)
+#define bfin_read_CAN1_MBTIF2()		bfin_read16(CAN1_MBTIF2)
+#define bfin_write_CAN1_MBTIF2(val)	bfin_write16(CAN1_MBTIF2, val)
+#define bfin_read_CAN1_MBRIF2()		bfin_read16(CAN1_MBRIF2)
+#define bfin_write_CAN1_MBRIF2(val)	bfin_write16(CAN1_MBRIF2, val)
+#define bfin_read_CAN1_MBIM2()		bfin_read16(CAN1_MBIM2)
+#define bfin_write_CAN1_MBIM2(val)	bfin_write16(CAN1_MBIM2, val)
+#define bfin_read_CAN1_RFH2()		bfin_read16(CAN1_RFH2)
+#define bfin_write_CAN1_RFH2(val)	bfin_write16(CAN1_RFH2, val)
+#define bfin_read_CAN1_OPSS2()		bfin_read16(CAN1_OPSS2)
+#define bfin_write_CAN1_OPSS2(val)	bfin_write16(CAN1_OPSS2, val)
+
+/* CAN Controller 1 Clock/Interrubfin_read_()t/Counter Registers */
+
+#define bfin_read_CAN1_CLOCK()		bfin_read16(CAN1_CLOCK)
+#define bfin_write_CAN1_CLOCK(val)	bfin_write16(CAN1_CLOCK, val)
+#define bfin_read_CAN1_TIMING()		bfin_read16(CAN1_TIMING)
+#define bfin_write_CAN1_TIMING(val)	bfin_write16(CAN1_TIMING, val)
+#define bfin_read_CAN1_DEBUG()		bfin_read16(CAN1_DEBUG)
+#define bfin_write_CAN1_DEBUG(val)	bfin_write16(CAN1_DEBUG, val)
+#define bfin_read_CAN1_STATUS()		bfin_read16(CAN1_STATUS)
+#define bfin_write_CAN1_STATUS(val)	bfin_write16(CAN1_STATUS, val)
+#define bfin_read_CAN1_CEC()		bfin_read16(CAN1_CEC)
+#define bfin_write_CAN1_CEC(val)	bfin_write16(CAN1_CEC, val)
+#define bfin_read_CAN1_GIS()		bfin_read16(CAN1_GIS)
+#define bfin_write_CAN1_GIS(val)	bfin_write16(CAN1_GIS, val)
+#define bfin_read_CAN1_GIM()		bfin_read16(CAN1_GIM)
+#define bfin_write_CAN1_GIM(val)	bfin_write16(CAN1_GIM, val)
+#define bfin_read_CAN1_GIF()		bfin_read16(CAN1_GIF)
+#define bfin_write_CAN1_GIF(val)	bfin_write16(CAN1_GIF, val)
+#define bfin_read_CAN1_CONTROL()	bfin_read16(CAN1_CONTROL)
+#define bfin_write_CAN1_CONTROL(val)	bfin_write16(CAN1_CONTROL, val)
+#define bfin_read_CAN1_INTR()		bfin_read16(CAN1_INTR)
+#define bfin_write_CAN1_INTR(val)	bfin_write16(CAN1_INTR, val)
+#define bfin_read_CAN1_MBTD()		bfin_read16(CAN1_MBTD)
+#define bfin_write_CAN1_MBTD(val)	bfin_write16(CAN1_MBTD, val)
+#define bfin_read_CAN1_EWR()		bfin_read16(CAN1_EWR)
+#define bfin_write_CAN1_EWR(val)	bfin_write16(CAN1_EWR, val)
+#define bfin_read_CAN1_ESR()		bfin_read16(CAN1_ESR)
+#define bfin_write_CAN1_ESR(val)	bfin_write16(CAN1_ESR, val)
+#define bfin_read_CAN1_UCCNT()		bfin_read16(CAN1_UCCNT)
+#define bfin_write_CAN1_UCCNT(val)	bfin_write16(CAN1_UCCNT, val)
+#define bfin_read_CAN1_UCRC()		bfin_read16(CAN1_UCRC)
+#define bfin_write_CAN1_UCRC(val)	bfin_write16(CAN1_UCRC, val)
+#define bfin_read_CAN1_UCCNF()		bfin_read16(CAN1_UCCNF)
+#define bfin_write_CAN1_UCCNF(val)	bfin_write16(CAN1_UCCNF, val)
+
+/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */
+
+#define bfin_read_CAN1_AM00L()		bfin_read16(CAN1_AM00L)
+#define bfin_write_CAN1_AM00L(val)	bfin_write16(CAN1_AM00L, val)
+#define bfin_read_CAN1_AM00H()		bfin_read16(CAN1_AM00H)
+#define bfin_write_CAN1_AM00H(val)	bfin_write16(CAN1_AM00H, val)
+#define bfin_read_CAN1_AM01L()		bfin_read16(CAN1_AM01L)
+#define bfin_write_CAN1_AM01L(val)	bfin_write16(CAN1_AM01L, val)
+#define bfin_read_CAN1_AM01H()		bfin_read16(CAN1_AM01H)
+#define bfin_write_CAN1_AM01H(val)	bfin_write16(CAN1_AM01H, val)
+#define bfin_read_CAN1_AM02L()		bfin_read16(CAN1_AM02L)
+#define bfin_write_CAN1_AM02L(val)	bfin_write16(CAN1_AM02L, val)
+#define bfin_read_CAN1_AM02H()		bfin_read16(CAN1_AM02H)
+#define bfin_write_CAN1_AM02H(val)	bfin_write16(CAN1_AM02H, val)
+#define bfin_read_CAN1_AM03L()		bfin_read16(CAN1_AM03L)
+#define bfin_write_CAN1_AM03L(val)	bfin_write16(CAN1_AM03L, val)
+#define bfin_read_CAN1_AM03H()		bfin_read16(CAN1_AM03H)
+#define bfin_write_CAN1_AM03H(val)	bfin_write16(CAN1_AM03H, val)
+#define bfin_read_CAN1_AM04L()		bfin_read16(CAN1_AM04L)
+#define bfin_write_CAN1_AM04L(val)	bfin_write16(CAN1_AM04L, val)
+#define bfin_read_CAN1_AM04H()		bfin_read16(CAN1_AM04H)
+#define bfin_write_CAN1_AM04H(val)	bfin_write16(CAN1_AM04H, val)
+#define bfin_read_CAN1_AM05L()		bfin_read16(CAN1_AM05L)
+#define bfin_write_CAN1_AM05L(val)	bfin_write16(CAN1_AM05L, val)
+#define bfin_read_CAN1_AM05H()		bfin_read16(CAN1_AM05H)
+#define bfin_write_CAN1_AM05H(val)	bfin_write16(CAN1_AM05H, val)
+#define bfin_read_CAN1_AM06L()		bfin_read16(CAN1_AM06L)
+#define bfin_write_CAN1_AM06L(val)	bfin_write16(CAN1_AM06L, val)
+#define bfin_read_CAN1_AM06H()		bfin_read16(CAN1_AM06H)
+#define bfin_write_CAN1_AM06H(val)	bfin_write16(CAN1_AM06H, val)
+#define bfin_read_CAN1_AM07L()		bfin_read16(CAN1_AM07L)
+#define bfin_write_CAN1_AM07L(val)	bfin_write16(CAN1_AM07L, val)
+#define bfin_read_CAN1_AM07H()		bfin_read16(CAN1_AM07H)
+#define bfin_write_CAN1_AM07H(val)	bfin_write16(CAN1_AM07H, val)
+#define bfin_read_CAN1_AM08L()		bfin_read16(CAN1_AM08L)
+#define bfin_write_CAN1_AM08L(val)	bfin_write16(CAN1_AM08L, val)
+#define bfin_read_CAN1_AM08H()		bfin_read16(CAN1_AM08H)
+#define bfin_write_CAN1_AM08H(val)	bfin_write16(CAN1_AM08H, val)
+#define bfin_read_CAN1_AM09L()		bfin_read16(CAN1_AM09L)
+#define bfin_write_CAN1_AM09L(val)	bfin_write16(CAN1_AM09L, val)
+#define bfin_read_CAN1_AM09H()		bfin_read16(CAN1_AM09H)
+#define bfin_write_CAN1_AM09H(val)	bfin_write16(CAN1_AM09H, val)
+#define bfin_read_CAN1_AM10L()		bfin_read16(CAN1_AM10L)
+#define bfin_write_CAN1_AM10L(val)	bfin_write16(CAN1_AM10L, val)
+#define bfin_read_CAN1_AM10H()		bfin_read16(CAN1_AM10H)
+#define bfin_write_CAN1_AM10H(val)	bfin_write16(CAN1_AM10H, val)
+#define bfin_read_CAN1_AM11L()		bfin_read16(CAN1_AM11L)
+#define bfin_write_CAN1_AM11L(val)	bfin_write16(CAN1_AM11L, val)
+#define bfin_read_CAN1_AM11H()		bfin_read16(CAN1_AM11H)
+#define bfin_write_CAN1_AM11H(val)	bfin_write16(CAN1_AM11H, val)
+#define bfin_read_CAN1_AM12L()		bfin_read16(CAN1_AM12L)
+#define bfin_write_CAN1_AM12L(val)	bfin_write16(CAN1_AM12L, val)
+#define bfin_read_CAN1_AM12H()		bfin_read16(CAN1_AM12H)
+#define bfin_write_CAN1_AM12H(val)	bfin_write16(CAN1_AM12H, val)
+#define bfin_read_CAN1_AM13L()		bfin_read16(CAN1_AM13L)
+#define bfin_write_CAN1_AM13L(val)	bfin_write16(CAN1_AM13L, val)
+#define bfin_read_CAN1_AM13H()		bfin_read16(CAN1_AM13H)
+#define bfin_write_CAN1_AM13H(val)	bfin_write16(CAN1_AM13H, val)
+#define bfin_read_CAN1_AM14L()		bfin_read16(CAN1_AM14L)
+#define bfin_write_CAN1_AM14L(val)	bfin_write16(CAN1_AM14L, val)
+#define bfin_read_CAN1_AM14H()		bfin_read16(CAN1_AM14H)
+#define bfin_write_CAN1_AM14H(val)	bfin_write16(CAN1_AM14H, val)
+#define bfin_read_CAN1_AM15L()		bfin_read16(CAN1_AM15L)
+#define bfin_write_CAN1_AM15L(val)	bfin_write16(CAN1_AM15L, val)
+#define bfin_read_CAN1_AM15H()		bfin_read16(CAN1_AM15H)
+#define bfin_write_CAN1_AM15H(val)	bfin_write16(CAN1_AM15H, val)
+
+/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */
+
+#define bfin_read_CAN1_AM16L()		bfin_read16(CAN1_AM16L)
+#define bfin_write_CAN1_AM16L(val)	bfin_write16(CAN1_AM16L, val)
+#define bfin_read_CAN1_AM16H()		bfin_read16(CAN1_AM16H)
+#define bfin_write_CAN1_AM16H(val)	bfin_write16(CAN1_AM16H, val)
+#define bfin_read_CAN1_AM17L()		bfin_read16(CAN1_AM17L)
+#define bfin_write_CAN1_AM17L(val)	bfin_write16(CAN1_AM17L, val)
+#define bfin_read_CAN1_AM17H()		bfin_read16(CAN1_AM17H)
+#define bfin_write_CAN1_AM17H(val)	bfin_write16(CAN1_AM17H, val)
+#define bfin_read_CAN1_AM18L()		bfin_read16(CAN1_AM18L)
+#define bfin_write_CAN1_AM18L(val)	bfin_write16(CAN1_AM18L, val)
+#define bfin_read_CAN1_AM18H()		bfin_read16(CAN1_AM18H)
+#define bfin_write_CAN1_AM18H(val)	bfin_write16(CAN1_AM18H, val)
+#define bfin_read_CAN1_AM19L()		bfin_read16(CAN1_AM19L)
+#define bfin_write_CAN1_AM19L(val)	bfin_write16(CAN1_AM19L, val)
+#define bfin_read_CAN1_AM19H()		bfin_read16(CAN1_AM19H)
+#define bfin_write_CAN1_AM19H(val)	bfin_write16(CAN1_AM19H, val)
+#define bfin_read_CAN1_AM20L()		bfin_read16(CAN1_AM20L)
+#define bfin_write_CAN1_AM20L(val)	bfin_write16(CAN1_AM20L, val)
+#define bfin_read_CAN1_AM20H()		bfin_read16(CAN1_AM20H)
+#define bfin_write_CAN1_AM20H(val)	bfin_write16(CAN1_AM20H, val)
+#define bfin_read_CAN1_AM21L()		bfin_read16(CAN1_AM21L)
+#define bfin_write_CAN1_AM21L(val)	bfin_write16(CAN1_AM21L, val)
+#define bfin_read_CAN1_AM21H()		bfin_read16(CAN1_AM21H)
+#define bfin_write_CAN1_AM21H(val)	bfin_write16(CAN1_AM21H, val)
+#define bfin_read_CAN1_AM22L()		bfin_read16(CAN1_AM22L)
+#define bfin_write_CAN1_AM22L(val)	bfin_write16(CAN1_AM22L, val)
+#define bfin_read_CAN1_AM22H()		bfin_read16(CAN1_AM22H)
+#define bfin_write_CAN1_AM22H(val)	bfin_write16(CAN1_AM22H, val)
+#define bfin_read_CAN1_AM23L()		bfin_read16(CAN1_AM23L)
+#define bfin_write_CAN1_AM23L(val)	bfin_write16(CAN1_AM23L, val)
+#define bfin_read_CAN1_AM23H()		bfin_read16(CAN1_AM23H)
+#define bfin_write_CAN1_AM23H(val)	bfin_write16(CAN1_AM23H, val)
+#define bfin_read_CAN1_AM24L()		bfin_read16(CAN1_AM24L)
+#define bfin_write_CAN1_AM24L(val)	bfin_write16(CAN1_AM24L, val)
+#define bfin_read_CAN1_AM24H()		bfin_read16(CAN1_AM24H)
+#define bfin_write_CAN1_AM24H(val)	bfin_write16(CAN1_AM24H, val)
+#define bfin_read_CAN1_AM25L()		bfin_read16(CAN1_AM25L)
+#define bfin_write_CAN1_AM25L(val)	bfin_write16(CAN1_AM25L, val)
+#define bfin_read_CAN1_AM25H()		bfin_read16(CAN1_AM25H)
+#define bfin_write_CAN1_AM25H(val)	bfin_write16(CAN1_AM25H, val)
+#define bfin_read_CAN1_AM26L()		bfin_read16(CAN1_AM26L)
+#define bfin_write_CAN1_AM26L(val)	bfin_write16(CAN1_AM26L, val)
+#define bfin_read_CAN1_AM26H()		bfin_read16(CAN1_AM26H)
+#define bfin_write_CAN1_AM26H(val)	bfin_write16(CAN1_AM26H, val)
+#define bfin_read_CAN1_AM27L()		bfin_read16(CAN1_AM27L)
+#define bfin_write_CAN1_AM27L(val)	bfin_write16(CAN1_AM27L, val)
+#define bfin_read_CAN1_AM27H()		bfin_read16(CAN1_AM27H)
+#define bfin_write_CAN1_AM27H(val)	bfin_write16(CAN1_AM27H, val)
+#define bfin_read_CAN1_AM28L()		bfin_read16(CAN1_AM28L)
+#define bfin_write_CAN1_AM28L(val)	bfin_write16(CAN1_AM28L, val)
+#define bfin_read_CAN1_AM28H()		bfin_read16(CAN1_AM28H)
+#define bfin_write_CAN1_AM28H(val)	bfin_write16(CAN1_AM28H, val)
+#define bfin_read_CAN1_AM29L()		bfin_read16(CAN1_AM29L)
+#define bfin_write_CAN1_AM29L(val)	bfin_write16(CAN1_AM29L, val)
+#define bfin_read_CAN1_AM29H()		bfin_read16(CAN1_AM29H)
+#define bfin_write_CAN1_AM29H(val)	bfin_write16(CAN1_AM29H, val)
+#define bfin_read_CAN1_AM30L()		bfin_read16(CAN1_AM30L)
+#define bfin_write_CAN1_AM30L(val)	bfin_write16(CAN1_AM30L, val)
+#define bfin_read_CAN1_AM30H()		bfin_read16(CAN1_AM30H)
+#define bfin_write_CAN1_AM30H(val)	bfin_write16(CAN1_AM30H, val)
+#define bfin_read_CAN1_AM31L()		bfin_read16(CAN1_AM31L)
+#define bfin_write_CAN1_AM31L(val)	bfin_write16(CAN1_AM31L, val)
+#define bfin_read_CAN1_AM31H()		bfin_read16(CAN1_AM31H)
+#define bfin_write_CAN1_AM31H(val)	bfin_write16(CAN1_AM31H, val)
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define bfin_read_CAN1_MB00_DATA0()		bfin_read16(CAN1_MB00_DATA0)
+#define bfin_write_CAN1_MB00_DATA0(val)		bfin_write16(CAN1_MB00_DATA0, val)
+#define bfin_read_CAN1_MB00_DATA1()		bfin_read16(CAN1_MB00_DATA1)
+#define bfin_write_CAN1_MB00_DATA1(val)		bfin_write16(CAN1_MB00_DATA1, val)
+#define bfin_read_CAN1_MB00_DATA2()		bfin_read16(CAN1_MB00_DATA2)
+#define bfin_write_CAN1_MB00_DATA2(val)		bfin_write16(CAN1_MB00_DATA2, val)
+#define bfin_read_CAN1_MB00_DATA3()		bfin_read16(CAN1_MB00_DATA3)
+#define bfin_write_CAN1_MB00_DATA3(val)		bfin_write16(CAN1_MB00_DATA3, val)
+#define bfin_read_CAN1_MB00_LENGTH()		bfin_read16(CAN1_MB00_LENGTH)
+#define bfin_write_CAN1_MB00_LENGTH(val)	bfin_write16(CAN1_MB00_LENGTH, val)
+#define bfin_read_CAN1_MB00_TIMESTAMP()		bfin_read16(CAN1_MB00_TIMESTAMP)
+#define bfin_write_CAN1_MB00_TIMESTAMP(val)	bfin_write16(CAN1_MB00_TIMESTAMP, val)
+#define bfin_read_CAN1_MB00_ID0()		bfin_read16(CAN1_MB00_ID0)
+#define bfin_write_CAN1_MB00_ID0(val)		bfin_write16(CAN1_MB00_ID0, val)
+#define bfin_read_CAN1_MB00_ID1()		bfin_read16(CAN1_MB00_ID1)
+#define bfin_write_CAN1_MB00_ID1(val)		bfin_write16(CAN1_MB00_ID1, val)
+#define bfin_read_CAN1_MB01_DATA0()		bfin_read16(CAN1_MB01_DATA0)
+#define bfin_write_CAN1_MB01_DATA0(val)		bfin_write16(CAN1_MB01_DATA0, val)
+#define bfin_read_CAN1_MB01_DATA1()		bfin_read16(CAN1_MB01_DATA1)
+#define bfin_write_CAN1_MB01_DATA1(val)		bfin_write16(CAN1_MB01_DATA1, val)
+#define bfin_read_CAN1_MB01_DATA2()		bfin_read16(CAN1_MB01_DATA2)
+#define bfin_write_CAN1_MB01_DATA2(val)		bfin_write16(CAN1_MB01_DATA2, val)
+#define bfin_read_CAN1_MB01_DATA3()		bfin_read16(CAN1_MB01_DATA3)
+#define bfin_write_CAN1_MB01_DATA3(val)		bfin_write16(CAN1_MB01_DATA3, val)
+#define bfin_read_CAN1_MB01_LENGTH()		bfin_read16(CAN1_MB01_LENGTH)
+#define bfin_write_CAN1_MB01_LENGTH(val)	bfin_write16(CAN1_MB01_LENGTH, val)
+#define bfin_read_CAN1_MB01_TIMESTAMP()		bfin_read16(CAN1_MB01_TIMESTAMP)
+#define bfin_write_CAN1_MB01_TIMESTAMP(val)	bfin_write16(CAN1_MB01_TIMESTAMP, val)
+#define bfin_read_CAN1_MB01_ID0()		bfin_read16(CAN1_MB01_ID0)
+#define bfin_write_CAN1_MB01_ID0(val)		bfin_write16(CAN1_MB01_ID0, val)
+#define bfin_read_CAN1_MB01_ID1()		bfin_read16(CAN1_MB01_ID1)
+#define bfin_write_CAN1_MB01_ID1(val)		bfin_write16(CAN1_MB01_ID1, val)
+#define bfin_read_CAN1_MB02_DATA0()		bfin_read16(CAN1_MB02_DATA0)
+#define bfin_write_CAN1_MB02_DATA0(val)		bfin_write16(CAN1_MB02_DATA0, val)
+#define bfin_read_CAN1_MB02_DATA1()		bfin_read16(CAN1_MB02_DATA1)
+#define bfin_write_CAN1_MB02_DATA1(val)		bfin_write16(CAN1_MB02_DATA1, val)
+#define bfin_read_CAN1_MB02_DATA2()		bfin_read16(CAN1_MB02_DATA2)
+#define bfin_write_CAN1_MB02_DATA2(val)		bfin_write16(CAN1_MB02_DATA2, val)
+#define bfin_read_CAN1_MB02_DATA3()		bfin_read16(CAN1_MB02_DATA3)
+#define bfin_write_CAN1_MB02_DATA3(val)		bfin_write16(CAN1_MB02_DATA3, val)
+#define bfin_read_CAN1_MB02_LENGTH()		bfin_read16(CAN1_MB02_LENGTH)
+#define bfin_write_CAN1_MB02_LENGTH(val)	bfin_write16(CAN1_MB02_LENGTH, val)
+#define bfin_read_CAN1_MB02_TIMESTAMP()		bfin_read16(CAN1_MB02_TIMESTAMP)
+#define bfin_write_CAN1_MB02_TIMESTAMP(val)	bfin_write16(CAN1_MB02_TIMESTAMP, val)
+#define bfin_read_CAN1_MB02_ID0()		bfin_read16(CAN1_MB02_ID0)
+#define bfin_write_CAN1_MB02_ID0(val)		bfin_write16(CAN1_MB02_ID0, val)
+#define bfin_read_CAN1_MB02_ID1()		bfin_read16(CAN1_MB02_ID1)
+#define bfin_write_CAN1_MB02_ID1(val)		bfin_write16(CAN1_MB02_ID1, val)
+#define bfin_read_CAN1_MB03_DATA0()		bfin_read16(CAN1_MB03_DATA0)
+#define bfin_write_CAN1_MB03_DATA0(val)		bfin_write16(CAN1_MB03_DATA0, val)
+#define bfin_read_CAN1_MB03_DATA1()		bfin_read16(CAN1_MB03_DATA1)
+#define bfin_write_CAN1_MB03_DATA1(val)		bfin_write16(CAN1_MB03_DATA1, val)
+#define bfin_read_CAN1_MB03_DATA2()		bfin_read16(CAN1_MB03_DATA2)
+#define bfin_write_CAN1_MB03_DATA2(val)		bfin_write16(CAN1_MB03_DATA2, val)
+#define bfin_read_CAN1_MB03_DATA3()		bfin_read16(CAN1_MB03_DATA3)
+#define bfin_write_CAN1_MB03_DATA3(val)		bfin_write16(CAN1_MB03_DATA3, val)
+#define bfin_read_CAN1_MB03_LENGTH()		bfin_read16(CAN1_MB03_LENGTH)
+#define bfin_write_CAN1_MB03_LENGTH(val)	bfin_write16(CAN1_MB03_LENGTH, val)
+#define bfin_read_CAN1_MB03_TIMESTAMP()		bfin_read16(CAN1_MB03_TIMESTAMP)
+#define bfin_write_CAN1_MB03_TIMESTAMP(val)	bfin_write16(CAN1_MB03_TIMESTAMP, val)
+#define bfin_read_CAN1_MB03_ID0()		bfin_read16(CAN1_MB03_ID0)
+#define bfin_write_CAN1_MB03_ID0(val)		bfin_write16(CAN1_MB03_ID0, val)
+#define bfin_read_CAN1_MB03_ID1()		bfin_read16(CAN1_MB03_ID1)
+#define bfin_write_CAN1_MB03_ID1(val)		bfin_write16(CAN1_MB03_ID1, val)
+#define bfin_read_CAN1_MB04_DATA0()		bfin_read16(CAN1_MB04_DATA0)
+#define bfin_write_CAN1_MB04_DATA0(val)		bfin_write16(CAN1_MB04_DATA0, val)
+#define bfin_read_CAN1_MB04_DATA1()		bfin_read16(CAN1_MB04_DATA1)
+#define bfin_write_CAN1_MB04_DATA1(val)		bfin_write16(CAN1_MB04_DATA1, val)
+#define bfin_read_CAN1_MB04_DATA2()		bfin_read16(CAN1_MB04_DATA2)
+#define bfin_write_CAN1_MB04_DATA2(val)		bfin_write16(CAN1_MB04_DATA2, val)
+#define bfin_read_CAN1_MB04_DATA3()		bfin_read16(CAN1_MB04_DATA3)
+#define bfin_write_CAN1_MB04_DATA3(val)		bfin_write16(CAN1_MB04_DATA3, val)
+#define bfin_read_CAN1_MB04_LENGTH()		bfin_read16(CAN1_MB04_LENGTH)
+#define bfin_write_CAN1_MB04_LENGTH(val)	bfin_write16(CAN1_MB04_LENGTH, val)
+#define bfin_read_CAN1_MB04_TIMESTAMP()		bfin_read16(CAN1_MB04_TIMESTAMP)
+#define bfin_write_CAN1_MB04_TIMESTAMP(val)	bfin_write16(CAN1_MB04_TIMESTAMP, val)
+#define bfin_read_CAN1_MB04_ID0()		bfin_read16(CAN1_MB04_ID0)
+#define bfin_write_CAN1_MB04_ID0(val)		bfin_write16(CAN1_MB04_ID0, val)
+#define bfin_read_CAN1_MB04_ID1()		bfin_read16(CAN1_MB04_ID1)
+#define bfin_write_CAN1_MB04_ID1(val)		bfin_write16(CAN1_MB04_ID1, val)
+#define bfin_read_CAN1_MB05_DATA0()		bfin_read16(CAN1_MB05_DATA0)
+#define bfin_write_CAN1_MB05_DATA0(val)		bfin_write16(CAN1_MB05_DATA0, val)
+#define bfin_read_CAN1_MB05_DATA1()		bfin_read16(CAN1_MB05_DATA1)
+#define bfin_write_CAN1_MB05_DATA1(val)		bfin_write16(CAN1_MB05_DATA1, val)
+#define bfin_read_CAN1_MB05_DATA2()		bfin_read16(CAN1_MB05_DATA2)
+#define bfin_write_CAN1_MB05_DATA2(val)		bfin_write16(CAN1_MB05_DATA2, val)
+#define bfin_read_CAN1_MB05_DATA3()		bfin_read16(CAN1_MB05_DATA3)
+#define bfin_write_CAN1_MB05_DATA3(val)		bfin_write16(CAN1_MB05_DATA3, val)
+#define bfin_read_CAN1_MB05_LENGTH()		bfin_read16(CAN1_MB05_LENGTH)
+#define bfin_write_CAN1_MB05_LENGTH(val)	bfin_write16(CAN1_MB05_LENGTH, val)
+#define bfin_read_CAN1_MB05_TIMESTAMP()		bfin_read16(CAN1_MB05_TIMESTAMP)
+#define bfin_write_CAN1_MB05_TIMESTAMP(val)	bfin_write16(CAN1_MB05_TIMESTAMP, val)
+#define bfin_read_CAN1_MB05_ID0()		bfin_read16(CAN1_MB05_ID0)
+#define bfin_write_CAN1_MB05_ID0(val)		bfin_write16(CAN1_MB05_ID0, val)
+#define bfin_read_CAN1_MB05_ID1()		bfin_read16(CAN1_MB05_ID1)
+#define bfin_write_CAN1_MB05_ID1(val)		bfin_write16(CAN1_MB05_ID1, val)
+#define bfin_read_CAN1_MB06_DATA0()		bfin_read16(CAN1_MB06_DATA0)
+#define bfin_write_CAN1_MB06_DATA0(val)		bfin_write16(CAN1_MB06_DATA0, val)
+#define bfin_read_CAN1_MB06_DATA1()		bfin_read16(CAN1_MB06_DATA1)
+#define bfin_write_CAN1_MB06_DATA1(val)		bfin_write16(CAN1_MB06_DATA1, val)
+#define bfin_read_CAN1_MB06_DATA2()		bfin_read16(CAN1_MB06_DATA2)
+#define bfin_write_CAN1_MB06_DATA2(val)		bfin_write16(CAN1_MB06_DATA2, val)
+#define bfin_read_CAN1_MB06_DATA3()		bfin_read16(CAN1_MB06_DATA3)
+#define bfin_write_CAN1_MB06_DATA3(val)		bfin_write16(CAN1_MB06_DATA3, val)
+#define bfin_read_CAN1_MB06_LENGTH()		bfin_read16(CAN1_MB06_LENGTH)
+#define bfin_write_CAN1_MB06_LENGTH(val)	bfin_write16(CAN1_MB06_LENGTH, val)
+#define bfin_read_CAN1_MB06_TIMESTAMP()		bfin_read16(CAN1_MB06_TIMESTAMP)
+#define bfin_write_CAN1_MB06_TIMESTAMP(val)	bfin_write16(CAN1_MB06_TIMESTAMP, val)
+#define bfin_read_CAN1_MB06_ID0()		bfin_read16(CAN1_MB06_ID0)
+#define bfin_write_CAN1_MB06_ID0(val)		bfin_write16(CAN1_MB06_ID0, val)
+#define bfin_read_CAN1_MB06_ID1()		bfin_read16(CAN1_MB06_ID1)
+#define bfin_write_CAN1_MB06_ID1(val)		bfin_write16(CAN1_MB06_ID1, val)
+#define bfin_read_CAN1_MB07_DATA0()		bfin_read16(CAN1_MB07_DATA0)
+#define bfin_write_CAN1_MB07_DATA0(val)		bfin_write16(CAN1_MB07_DATA0, val)
+#define bfin_read_CAN1_MB07_DATA1()		bfin_read16(CAN1_MB07_DATA1)
+#define bfin_write_CAN1_MB07_DATA1(val)		bfin_write16(CAN1_MB07_DATA1, val)
+#define bfin_read_CAN1_MB07_DATA2()		bfin_read16(CAN1_MB07_DATA2)
+#define bfin_write_CAN1_MB07_DATA2(val)		bfin_write16(CAN1_MB07_DATA2, val)
+#define bfin_read_CAN1_MB07_DATA3()		bfin_read16(CAN1_MB07_DATA3)
+#define bfin_write_CAN1_MB07_DATA3(val)		bfin_write16(CAN1_MB07_DATA3, val)
+#define bfin_read_CAN1_MB07_LENGTH()		bfin_read16(CAN1_MB07_LENGTH)
+#define bfin_write_CAN1_MB07_LENGTH(val)	bfin_write16(CAN1_MB07_LENGTH, val)
+#define bfin_read_CAN1_MB07_TIMESTAMP()		bfin_read16(CAN1_MB07_TIMESTAMP)
+#define bfin_write_CAN1_MB07_TIMESTAMP(val)	bfin_write16(CAN1_MB07_TIMESTAMP, val)
+#define bfin_read_CAN1_MB07_ID0()		bfin_read16(CAN1_MB07_ID0)
+#define bfin_write_CAN1_MB07_ID0(val)		bfin_write16(CAN1_MB07_ID0, val)
+#define bfin_read_CAN1_MB07_ID1()		bfin_read16(CAN1_MB07_ID1)
+#define bfin_write_CAN1_MB07_ID1(val)		bfin_write16(CAN1_MB07_ID1, val)
+#define bfin_read_CAN1_MB08_DATA0()		bfin_read16(CAN1_MB08_DATA0)
+#define bfin_write_CAN1_MB08_DATA0(val)		bfin_write16(CAN1_MB08_DATA0, val)
+#define bfin_read_CAN1_MB08_DATA1()		bfin_read16(CAN1_MB08_DATA1)
+#define bfin_write_CAN1_MB08_DATA1(val)		bfin_write16(CAN1_MB08_DATA1, val)
+#define bfin_read_CAN1_MB08_DATA2()		bfin_read16(CAN1_MB08_DATA2)
+#define bfin_write_CAN1_MB08_DATA2(val)		bfin_write16(CAN1_MB08_DATA2, val)
+#define bfin_read_CAN1_MB08_DATA3()		bfin_read16(CAN1_MB08_DATA3)
+#define bfin_write_CAN1_MB08_DATA3(val)		bfin_write16(CAN1_MB08_DATA3, val)
+#define bfin_read_CAN1_MB08_LENGTH()		bfin_read16(CAN1_MB08_LENGTH)
+#define bfin_write_CAN1_MB08_LENGTH(val)	bfin_write16(CAN1_MB08_LENGTH, val)
+#define bfin_read_CAN1_MB08_TIMESTAMP()		bfin_read16(CAN1_MB08_TIMESTAMP)
+#define bfin_write_CAN1_MB08_TIMESTAMP(val)	bfin_write16(CAN1_MB08_TIMESTAMP, val)
+#define bfin_read_CAN1_MB08_ID0()		bfin_read16(CAN1_MB08_ID0)
+#define bfin_write_CAN1_MB08_ID0(val)		bfin_write16(CAN1_MB08_ID0, val)
+#define bfin_read_CAN1_MB08_ID1()		bfin_read16(CAN1_MB08_ID1)
+#define bfin_write_CAN1_MB08_ID1(val)		bfin_write16(CAN1_MB08_ID1, val)
+#define bfin_read_CAN1_MB09_DATA0()		bfin_read16(CAN1_MB09_DATA0)
+#define bfin_write_CAN1_MB09_DATA0(val)		bfin_write16(CAN1_MB09_DATA0, val)
+#define bfin_read_CAN1_MB09_DATA1()		bfin_read16(CAN1_MB09_DATA1)
+#define bfin_write_CAN1_MB09_DATA1(val)		bfin_write16(CAN1_MB09_DATA1, val)
+#define bfin_read_CAN1_MB09_DATA2()		bfin_read16(CAN1_MB09_DATA2)
+#define bfin_write_CAN1_MB09_DATA2(val)		bfin_write16(CAN1_MB09_DATA2, val)
+#define bfin_read_CAN1_MB09_DATA3()		bfin_read16(CAN1_MB09_DATA3)
+#define bfin_write_CAN1_MB09_DATA3(val)		bfin_write16(CAN1_MB09_DATA3, val)
+#define bfin_read_CAN1_MB09_LENGTH()		bfin_read16(CAN1_MB09_LENGTH)
+#define bfin_write_CAN1_MB09_LENGTH(val)	bfin_write16(CAN1_MB09_LENGTH, val)
+#define bfin_read_CAN1_MB09_TIMESTAMP()		bfin_read16(CAN1_MB09_TIMESTAMP)
+#define bfin_write_CAN1_MB09_TIMESTAMP(val)	bfin_write16(CAN1_MB09_TIMESTAMP, val)
+#define bfin_read_CAN1_MB09_ID0()		bfin_read16(CAN1_MB09_ID0)
+#define bfin_write_CAN1_MB09_ID0(val)		bfin_write16(CAN1_MB09_ID0, val)
+#define bfin_read_CAN1_MB09_ID1()		bfin_read16(CAN1_MB09_ID1)
+#define bfin_write_CAN1_MB09_ID1(val)		bfin_write16(CAN1_MB09_ID1, val)
+#define bfin_read_CAN1_MB10_DATA0()		bfin_read16(CAN1_MB10_DATA0)
+#define bfin_write_CAN1_MB10_DATA0(val)		bfin_write16(CAN1_MB10_DATA0, val)
+#define bfin_read_CAN1_MB10_DATA1()		bfin_read16(CAN1_MB10_DATA1)
+#define bfin_write_CAN1_MB10_DATA1(val)		bfin_write16(CAN1_MB10_DATA1, val)
+#define bfin_read_CAN1_MB10_DATA2()		bfin_read16(CAN1_MB10_DATA2)
+#define bfin_write_CAN1_MB10_DATA2(val)		bfin_write16(CAN1_MB10_DATA2, val)
+#define bfin_read_CAN1_MB10_DATA3()		bfin_read16(CAN1_MB10_DATA3)
+#define bfin_write_CAN1_MB10_DATA3(val)		bfin_write16(CAN1_MB10_DATA3, val)
+#define bfin_read_CAN1_MB10_LENGTH()		bfin_read16(CAN1_MB10_LENGTH)
+#define bfin_write_CAN1_MB10_LENGTH(val)	bfin_write16(CAN1_MB10_LENGTH, val)
+#define bfin_read_CAN1_MB10_TIMESTAMP()		bfin_read16(CAN1_MB10_TIMESTAMP)
+#define bfin_write_CAN1_MB10_TIMESTAMP(val)	bfin_write16(CAN1_MB10_TIMESTAMP, val)
+#define bfin_read_CAN1_MB10_ID0()		bfin_read16(CAN1_MB10_ID0)
+#define bfin_write_CAN1_MB10_ID0(val)		bfin_write16(CAN1_MB10_ID0, val)
+#define bfin_read_CAN1_MB10_ID1()		bfin_read16(CAN1_MB10_ID1)
+#define bfin_write_CAN1_MB10_ID1(val)		bfin_write16(CAN1_MB10_ID1, val)
+#define bfin_read_CAN1_MB11_DATA0()		bfin_read16(CAN1_MB11_DATA0)
+#define bfin_write_CAN1_MB11_DATA0(val)		bfin_write16(CAN1_MB11_DATA0, val)
+#define bfin_read_CAN1_MB11_DATA1()		bfin_read16(CAN1_MB11_DATA1)
+#define bfin_write_CAN1_MB11_DATA1(val)		bfin_write16(CAN1_MB11_DATA1, val)
+#define bfin_read_CAN1_MB11_DATA2()		bfin_read16(CAN1_MB11_DATA2)
+#define bfin_write_CAN1_MB11_DATA2(val)		bfin_write16(CAN1_MB11_DATA2, val)
+#define bfin_read_CAN1_MB11_DATA3()		bfin_read16(CAN1_MB11_DATA3)
+#define bfin_write_CAN1_MB11_DATA3(val)		bfin_write16(CAN1_MB11_DATA3, val)
+#define bfin_read_CAN1_MB11_LENGTH()		bfin_read16(CAN1_MB11_LENGTH)
+#define bfin_write_CAN1_MB11_LENGTH(val)	bfin_write16(CAN1_MB11_LENGTH, val)
+#define bfin_read_CAN1_MB11_TIMESTAMP()		bfin_read16(CAN1_MB11_TIMESTAMP)
+#define bfin_write_CAN1_MB11_TIMESTAMP(val)	bfin_write16(CAN1_MB11_TIMESTAMP, val)
+#define bfin_read_CAN1_MB11_ID0()		bfin_read16(CAN1_MB11_ID0)
+#define bfin_write_CAN1_MB11_ID0(val)		bfin_write16(CAN1_MB11_ID0, val)
+#define bfin_read_CAN1_MB11_ID1()		bfin_read16(CAN1_MB11_ID1)
+#define bfin_write_CAN1_MB11_ID1(val)		bfin_write16(CAN1_MB11_ID1, val)
+#define bfin_read_CAN1_MB12_DATA0()		bfin_read16(CAN1_MB12_DATA0)
+#define bfin_write_CAN1_MB12_DATA0(val)		bfin_write16(CAN1_MB12_DATA0, val)
+#define bfin_read_CAN1_MB12_DATA1()		bfin_read16(CAN1_MB12_DATA1)
+#define bfin_write_CAN1_MB12_DATA1(val)		bfin_write16(CAN1_MB12_DATA1, val)
+#define bfin_read_CAN1_MB12_DATA2()		bfin_read16(CAN1_MB12_DATA2)
+#define bfin_write_CAN1_MB12_DATA2(val)		bfin_write16(CAN1_MB12_DATA2, val)
+#define bfin_read_CAN1_MB12_DATA3()		bfin_read16(CAN1_MB12_DATA3)
+#define bfin_write_CAN1_MB12_DATA3(val)		bfin_write16(CAN1_MB12_DATA3, val)
+#define bfin_read_CAN1_MB12_LENGTH()		bfin_read16(CAN1_MB12_LENGTH)
+#define bfin_write_CAN1_MB12_LENGTH(val)	bfin_write16(CAN1_MB12_LENGTH, val)
+#define bfin_read_CAN1_MB12_TIMESTAMP()		bfin_read16(CAN1_MB12_TIMESTAMP)
+#define bfin_write_CAN1_MB12_TIMESTAMP(val)	bfin_write16(CAN1_MB12_TIMESTAMP, val)
+#define bfin_read_CAN1_MB12_ID0()		bfin_read16(CAN1_MB12_ID0)
+#define bfin_write_CAN1_MB12_ID0(val)		bfin_write16(CAN1_MB12_ID0, val)
+#define bfin_read_CAN1_MB12_ID1()		bfin_read16(CAN1_MB12_ID1)
+#define bfin_write_CAN1_MB12_ID1(val)		bfin_write16(CAN1_MB12_ID1, val)
+#define bfin_read_CAN1_MB13_DATA0()		bfin_read16(CAN1_MB13_DATA0)
+#define bfin_write_CAN1_MB13_DATA0(val)		bfin_write16(CAN1_MB13_DATA0, val)
+#define bfin_read_CAN1_MB13_DATA1()		bfin_read16(CAN1_MB13_DATA1)
+#define bfin_write_CAN1_MB13_DATA1(val)		bfin_write16(CAN1_MB13_DATA1, val)
+#define bfin_read_CAN1_MB13_DATA2()		bfin_read16(CAN1_MB13_DATA2)
+#define bfin_write_CAN1_MB13_DATA2(val)		bfin_write16(CAN1_MB13_DATA2, val)
+#define bfin_read_CAN1_MB13_DATA3()		bfin_read16(CAN1_MB13_DATA3)
+#define bfin_write_CAN1_MB13_DATA3(val)		bfin_write16(CAN1_MB13_DATA3, val)
+#define bfin_read_CAN1_MB13_LENGTH()		bfin_read16(CAN1_MB13_LENGTH)
+#define bfin_write_CAN1_MB13_LENGTH(val)	bfin_write16(CAN1_MB13_LENGTH, val)
+#define bfin_read_CAN1_MB13_TIMESTAMP()		bfin_read16(CAN1_MB13_TIMESTAMP)
+#define bfin_write_CAN1_MB13_TIMESTAMP(val)	bfin_write16(CAN1_MB13_TIMESTAMP, val)
+#define bfin_read_CAN1_MB13_ID0()		bfin_read16(CAN1_MB13_ID0)
+#define bfin_write_CAN1_MB13_ID0(val)		bfin_write16(CAN1_MB13_ID0, val)
+#define bfin_read_CAN1_MB13_ID1()		bfin_read16(CAN1_MB13_ID1)
+#define bfin_write_CAN1_MB13_ID1(val)		bfin_write16(CAN1_MB13_ID1, val)
+#define bfin_read_CAN1_MB14_DATA0()		bfin_read16(CAN1_MB14_DATA0)
+#define bfin_write_CAN1_MB14_DATA0(val)		bfin_write16(CAN1_MB14_DATA0, val)
+#define bfin_read_CAN1_MB14_DATA1()		bfin_read16(CAN1_MB14_DATA1)
+#define bfin_write_CAN1_MB14_DATA1(val)		bfin_write16(CAN1_MB14_DATA1, val)
+#define bfin_read_CAN1_MB14_DATA2()		bfin_read16(CAN1_MB14_DATA2)
+#define bfin_write_CAN1_MB14_DATA2(val)		bfin_write16(CAN1_MB14_DATA2, val)
+#define bfin_read_CAN1_MB14_DATA3()		bfin_read16(CAN1_MB14_DATA3)
+#define bfin_write_CAN1_MB14_DATA3(val)		bfin_write16(CAN1_MB14_DATA3, val)
+#define bfin_read_CAN1_MB14_LENGTH()		bfin_read16(CAN1_MB14_LENGTH)
+#define bfin_write_CAN1_MB14_LENGTH(val)	bfin_write16(CAN1_MB14_LENGTH, val)
+#define bfin_read_CAN1_MB14_TIMESTAMP()		bfin_read16(CAN1_MB14_TIMESTAMP)
+#define bfin_write_CAN1_MB14_TIMESTAMP(val)	bfin_write16(CAN1_MB14_TIMESTAMP, val)
+#define bfin_read_CAN1_MB14_ID0()		bfin_read16(CAN1_MB14_ID0)
+#define bfin_write_CAN1_MB14_ID0(val)		bfin_write16(CAN1_MB14_ID0, val)
+#define bfin_read_CAN1_MB14_ID1()		bfin_read16(CAN1_MB14_ID1)
+#define bfin_write_CAN1_MB14_ID1(val)		bfin_write16(CAN1_MB14_ID1, val)
+#define bfin_read_CAN1_MB15_DATA0()		bfin_read16(CAN1_MB15_DATA0)
+#define bfin_write_CAN1_MB15_DATA0(val)		bfin_write16(CAN1_MB15_DATA0, val)
+#define bfin_read_CAN1_MB15_DATA1()		bfin_read16(CAN1_MB15_DATA1)
+#define bfin_write_CAN1_MB15_DATA1(val)		bfin_write16(CAN1_MB15_DATA1, val)
+#define bfin_read_CAN1_MB15_DATA2()		bfin_read16(CAN1_MB15_DATA2)
+#define bfin_write_CAN1_MB15_DATA2(val)		bfin_write16(CAN1_MB15_DATA2, val)
+#define bfin_read_CAN1_MB15_DATA3()		bfin_read16(CAN1_MB15_DATA3)
+#define bfin_write_CAN1_MB15_DATA3(val)		bfin_write16(CAN1_MB15_DATA3, val)
+#define bfin_read_CAN1_MB15_LENGTH()		bfin_read16(CAN1_MB15_LENGTH)
+#define bfin_write_CAN1_MB15_LENGTH(val)	bfin_write16(CAN1_MB15_LENGTH, val)
+#define bfin_read_CAN1_MB15_TIMESTAMP()		bfin_read16(CAN1_MB15_TIMESTAMP)
+#define bfin_write_CAN1_MB15_TIMESTAMP(val)	bfin_write16(CAN1_MB15_TIMESTAMP, val)
+#define bfin_read_CAN1_MB15_ID0()		bfin_read16(CAN1_MB15_ID0)
+#define bfin_write_CAN1_MB15_ID0(val)		bfin_write16(CAN1_MB15_ID0, val)
+#define bfin_read_CAN1_MB15_ID1()		bfin_read16(CAN1_MB15_ID1)
+#define bfin_write_CAN1_MB15_ID1(val)		bfin_write16(CAN1_MB15_ID1, val)
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define bfin_read_CAN1_MB16_DATA0()		bfin_read16(CAN1_MB16_DATA0)
+#define bfin_write_CAN1_MB16_DATA0(val)		bfin_write16(CAN1_MB16_DATA0, val)
+#define bfin_read_CAN1_MB16_DATA1()		bfin_read16(CAN1_MB16_DATA1)
+#define bfin_write_CAN1_MB16_DATA1(val)		bfin_write16(CAN1_MB16_DATA1, val)
+#define bfin_read_CAN1_MB16_DATA2()		bfin_read16(CAN1_MB16_DATA2)
+#define bfin_write_CAN1_MB16_DATA2(val)		bfin_write16(CAN1_MB16_DATA2, val)
+#define bfin_read_CAN1_MB16_DATA3()		bfin_read16(CAN1_MB16_DATA3)
+#define bfin_write_CAN1_MB16_DATA3(val)		bfin_write16(CAN1_MB16_DATA3, val)
+#define bfin_read_CAN1_MB16_LENGTH()		bfin_read16(CAN1_MB16_LENGTH)
+#define bfin_write_CAN1_MB16_LENGTH(val)	bfin_write16(CAN1_MB16_LENGTH, val)
+#define bfin_read_CAN1_MB16_TIMESTAMP()		bfin_read16(CAN1_MB16_TIMESTAMP)
+#define bfin_write_CAN1_MB16_TIMESTAMP(val)	bfin_write16(CAN1_MB16_TIMESTAMP, val)
+#define bfin_read_CAN1_MB16_ID0()		bfin_read16(CAN1_MB16_ID0)
+#define bfin_write_CAN1_MB16_ID0(val)		bfin_write16(CAN1_MB16_ID0, val)
+#define bfin_read_CAN1_MB16_ID1()		bfin_read16(CAN1_MB16_ID1)
+#define bfin_write_CAN1_MB16_ID1(val)		bfin_write16(CAN1_MB16_ID1, val)
+#define bfin_read_CAN1_MB17_DATA0()		bfin_read16(CAN1_MB17_DATA0)
+#define bfin_write_CAN1_MB17_DATA0(val)		bfin_write16(CAN1_MB17_DATA0, val)
+#define bfin_read_CAN1_MB17_DATA1()		bfin_read16(CAN1_MB17_DATA1)
+#define bfin_write_CAN1_MB17_DATA1(val)		bfin_write16(CAN1_MB17_DATA1, val)
+#define bfin_read_CAN1_MB17_DATA2()		bfin_read16(CAN1_MB17_DATA2)
+#define bfin_write_CAN1_MB17_DATA2(val)		bfin_write16(CAN1_MB17_DATA2, val)
+#define bfin_read_CAN1_MB17_DATA3()		bfin_read16(CAN1_MB17_DATA3)
+#define bfin_write_CAN1_MB17_DATA3(val)		bfin_write16(CAN1_MB17_DATA3, val)
+#define bfin_read_CAN1_MB17_LENGTH()		bfin_read16(CAN1_MB17_LENGTH)
+#define bfin_write_CAN1_MB17_LENGTH(val)	bfin_write16(CAN1_MB17_LENGTH, val)
+#define bfin_read_CAN1_MB17_TIMESTAMP()		bfin_read16(CAN1_MB17_TIMESTAMP)
+#define bfin_write_CAN1_MB17_TIMESTAMP(val)	bfin_write16(CAN1_MB17_TIMESTAMP, val)
+#define bfin_read_CAN1_MB17_ID0()		bfin_read16(CAN1_MB17_ID0)
+#define bfin_write_CAN1_MB17_ID0(val)		bfin_write16(CAN1_MB17_ID0, val)
+#define bfin_read_CAN1_MB17_ID1()		bfin_read16(CAN1_MB17_ID1)
+#define bfin_write_CAN1_MB17_ID1(val)		bfin_write16(CAN1_MB17_ID1, val)
+#define bfin_read_CAN1_MB18_DATA0()		bfin_read16(CAN1_MB18_DATA0)
+#define bfin_write_CAN1_MB18_DATA0(val)		bfin_write16(CAN1_MB18_DATA0, val)
+#define bfin_read_CAN1_MB18_DATA1()		bfin_read16(CAN1_MB18_DATA1)
+#define bfin_write_CAN1_MB18_DATA1(val)		bfin_write16(CAN1_MB18_DATA1, val)
+#define bfin_read_CAN1_MB18_DATA2()		bfin_read16(CAN1_MB18_DATA2)
+#define bfin_write_CAN1_MB18_DATA2(val)		bfin_write16(CAN1_MB18_DATA2, val)
+#define bfin_read_CAN1_MB18_DATA3()		bfin_read16(CAN1_MB18_DATA3)
+#define bfin_write_CAN1_MB18_DATA3(val)		bfin_write16(CAN1_MB18_DATA3, val)
+#define bfin_read_CAN1_MB18_LENGTH()		bfin_read16(CAN1_MB18_LENGTH)
+#define bfin_write_CAN1_MB18_LENGTH(val)	bfin_write16(CAN1_MB18_LENGTH, val)
+#define bfin_read_CAN1_MB18_TIMESTAMP()		bfin_read16(CAN1_MB18_TIMESTAMP)
+#define bfin_write_CAN1_MB18_TIMESTAMP(val)	bfin_write16(CAN1_MB18_TIMESTAMP, val)
+#define bfin_read_CAN1_MB18_ID0()		bfin_read16(CAN1_MB18_ID0)
+#define bfin_write_CAN1_MB18_ID0(val)		bfin_write16(CAN1_MB18_ID0, val)
+#define bfin_read_CAN1_MB18_ID1()		bfin_read16(CAN1_MB18_ID1)
+#define bfin_write_CAN1_MB18_ID1(val)		bfin_write16(CAN1_MB18_ID1, val)
+#define bfin_read_CAN1_MB19_DATA0()		bfin_read16(CAN1_MB19_DATA0)
+#define bfin_write_CAN1_MB19_DATA0(val)		bfin_write16(CAN1_MB19_DATA0, val)
+#define bfin_read_CAN1_MB19_DATA1()		bfin_read16(CAN1_MB19_DATA1)
+#define bfin_write_CAN1_MB19_DATA1(val)		bfin_write16(CAN1_MB19_DATA1, val)
+#define bfin_read_CAN1_MB19_DATA2()		bfin_read16(CAN1_MB19_DATA2)
+#define bfin_write_CAN1_MB19_DATA2(val)		bfin_write16(CAN1_MB19_DATA2, val)
+#define bfin_read_CAN1_MB19_DATA3()		bfin_read16(CAN1_MB19_DATA3)
+#define bfin_write_CAN1_MB19_DATA3(val)		bfin_write16(CAN1_MB19_DATA3, val)
+#define bfin_read_CAN1_MB19_LENGTH()		bfin_read16(CAN1_MB19_LENGTH)
+#define bfin_write_CAN1_MB19_LENGTH(val)	bfin_write16(CAN1_MB19_LENGTH, val)
+#define bfin_read_CAN1_MB19_TIMESTAMP()		bfin_read16(CAN1_MB19_TIMESTAMP)
+#define bfin_write_CAN1_MB19_TIMESTAMP(val)	bfin_write16(CAN1_MB19_TIMESTAMP, val)
+#define bfin_read_CAN1_MB19_ID0()		bfin_read16(CAN1_MB19_ID0)
+#define bfin_write_CAN1_MB19_ID0(val)		bfin_write16(CAN1_MB19_ID0, val)
+#define bfin_read_CAN1_MB19_ID1()		bfin_read16(CAN1_MB19_ID1)
+#define bfin_write_CAN1_MB19_ID1(val)		bfin_write16(CAN1_MB19_ID1, val)
+#define bfin_read_CAN1_MB20_DATA0()		bfin_read16(CAN1_MB20_DATA0)
+#define bfin_write_CAN1_MB20_DATA0(val)		bfin_write16(CAN1_MB20_DATA0, val)
+#define bfin_read_CAN1_MB20_DATA1()		bfin_read16(CAN1_MB20_DATA1)
+#define bfin_write_CAN1_MB20_DATA1(val)		bfin_write16(CAN1_MB20_DATA1, val)
+#define bfin_read_CAN1_MB20_DATA2()		bfin_read16(CAN1_MB20_DATA2)
+#define bfin_write_CAN1_MB20_DATA2(val)		bfin_write16(CAN1_MB20_DATA2, val)
+#define bfin_read_CAN1_MB20_DATA3()		bfin_read16(CAN1_MB20_DATA3)
+#define bfin_write_CAN1_MB20_DATA3(val)		bfin_write16(CAN1_MB20_DATA3, val)
+#define bfin_read_CAN1_MB20_LENGTH()		bfin_read16(CAN1_MB20_LENGTH)
+#define bfin_write_CAN1_MB20_LENGTH(val)	bfin_write16(CAN1_MB20_LENGTH, val)
+#define bfin_read_CAN1_MB20_TIMESTAMP()		bfin_read16(CAN1_MB20_TIMESTAMP)
+#define bfin_write_CAN1_MB20_TIMESTAMP(val)	bfin_write16(CAN1_MB20_TIMESTAMP, val)
+#define bfin_read_CAN1_MB20_ID0()		bfin_read16(CAN1_MB20_ID0)
+#define bfin_write_CAN1_MB20_ID0(val)		bfin_write16(CAN1_MB20_ID0, val)
+#define bfin_read_CAN1_MB20_ID1()		bfin_read16(CAN1_MB20_ID1)
+#define bfin_write_CAN1_MB20_ID1(val)		bfin_write16(CAN1_MB20_ID1, val)
+#define bfin_read_CAN1_MB21_DATA0()		bfin_read16(CAN1_MB21_DATA0)
+#define bfin_write_CAN1_MB21_DATA0(val)		bfin_write16(CAN1_MB21_DATA0, val)
+#define bfin_read_CAN1_MB21_DATA1()		bfin_read16(CAN1_MB21_DATA1)
+#define bfin_write_CAN1_MB21_DATA1(val)		bfin_write16(CAN1_MB21_DATA1, val)
+#define bfin_read_CAN1_MB21_DATA2()		bfin_read16(CAN1_MB21_DATA2)
+#define bfin_write_CAN1_MB21_DATA2(val)		bfin_write16(CAN1_MB21_DATA2, val)
+#define bfin_read_CAN1_MB21_DATA3()		bfin_read16(CAN1_MB21_DATA3)
+#define bfin_write_CAN1_MB21_DATA3(val)		bfin_write16(CAN1_MB21_DATA3, val)
+#define bfin_read_CAN1_MB21_LENGTH()		bfin_read16(CAN1_MB21_LENGTH)
+#define bfin_write_CAN1_MB21_LENGTH(val)	bfin_write16(CAN1_MB21_LENGTH, val)
+#define bfin_read_CAN1_MB21_TIMESTAMP()		bfin_read16(CAN1_MB21_TIMESTAMP)
+#define bfin_write_CAN1_MB21_TIMESTAMP(val)	bfin_write16(CAN1_MB21_TIMESTAMP, val)
+#define bfin_read_CAN1_MB21_ID0()		bfin_read16(CAN1_MB21_ID0)
+#define bfin_write_CAN1_MB21_ID0(val)		bfin_write16(CAN1_MB21_ID0, val)
+#define bfin_read_CAN1_MB21_ID1()		bfin_read16(CAN1_MB21_ID1)
+#define bfin_write_CAN1_MB21_ID1(val)		bfin_write16(CAN1_MB21_ID1, val)
+#define bfin_read_CAN1_MB22_DATA0()		bfin_read16(CAN1_MB22_DATA0)
+#define bfin_write_CAN1_MB22_DATA0(val)		bfin_write16(CAN1_MB22_DATA0, val)
+#define bfin_read_CAN1_MB22_DATA1()		bfin_read16(CAN1_MB22_DATA1)
+#define bfin_write_CAN1_MB22_DATA1(val)		bfin_write16(CAN1_MB22_DATA1, val)
+#define bfin_read_CAN1_MB22_DATA2()		bfin_read16(CAN1_MB22_DATA2)
+#define bfin_write_CAN1_MB22_DATA2(val)		bfin_write16(CAN1_MB22_DATA2, val)
+#define bfin_read_CAN1_MB22_DATA3()		bfin_read16(CAN1_MB22_DATA3)
+#define bfin_write_CAN1_MB22_DATA3(val)		bfin_write16(CAN1_MB22_DATA3, val)
+#define bfin_read_CAN1_MB22_LENGTH()		bfin_read16(CAN1_MB22_LENGTH)
+#define bfin_write_CAN1_MB22_LENGTH(val)	bfin_write16(CAN1_MB22_LENGTH, val)
+#define bfin_read_CAN1_MB22_TIMESTAMP()		bfin_read16(CAN1_MB22_TIMESTAMP)
+#define bfin_write_CAN1_MB22_TIMESTAMP(val)	bfin_write16(CAN1_MB22_TIMESTAMP, val)
+#define bfin_read_CAN1_MB22_ID0()		bfin_read16(CAN1_MB22_ID0)
+#define bfin_write_CAN1_MB22_ID0(val)		bfin_write16(CAN1_MB22_ID0, val)
+#define bfin_read_CAN1_MB22_ID1()		bfin_read16(CAN1_MB22_ID1)
+#define bfin_write_CAN1_MB22_ID1(val)		bfin_write16(CAN1_MB22_ID1, val)
+#define bfin_read_CAN1_MB23_DATA0()		bfin_read16(CAN1_MB23_DATA0)
+#define bfin_write_CAN1_MB23_DATA0(val)		bfin_write16(CAN1_MB23_DATA0, val)
+#define bfin_read_CAN1_MB23_DATA1()		bfin_read16(CAN1_MB23_DATA1)
+#define bfin_write_CAN1_MB23_DATA1(val)		bfin_write16(CAN1_MB23_DATA1, val)
+#define bfin_read_CAN1_MB23_DATA2()		bfin_read16(CAN1_MB23_DATA2)
+#define bfin_write_CAN1_MB23_DATA2(val)		bfin_write16(CAN1_MB23_DATA2, val)
+#define bfin_read_CAN1_MB23_DATA3()		bfin_read16(CAN1_MB23_DATA3)
+#define bfin_write_CAN1_MB23_DATA3(val)		bfin_write16(CAN1_MB23_DATA3, val)
+#define bfin_read_CAN1_MB23_LENGTH()		bfin_read16(CAN1_MB23_LENGTH)
+#define bfin_write_CAN1_MB23_LENGTH(val)	bfin_write16(CAN1_MB23_LENGTH, val)
+#define bfin_read_CAN1_MB23_TIMESTAMP()		bfin_read16(CAN1_MB23_TIMESTAMP)
+#define bfin_write_CAN1_MB23_TIMESTAMP(val)	bfin_write16(CAN1_MB23_TIMESTAMP, val)
+#define bfin_read_CAN1_MB23_ID0()		bfin_read16(CAN1_MB23_ID0)
+#define bfin_write_CAN1_MB23_ID0(val)		bfin_write16(CAN1_MB23_ID0, val)
+#define bfin_read_CAN1_MB23_ID1()		bfin_read16(CAN1_MB23_ID1)
+#define bfin_write_CAN1_MB23_ID1(val)		bfin_write16(CAN1_MB23_ID1, val)
+#define bfin_read_CAN1_MB24_DATA0()		bfin_read16(CAN1_MB24_DATA0)
+#define bfin_write_CAN1_MB24_DATA0(val)		bfin_write16(CAN1_MB24_DATA0, val)
+#define bfin_read_CAN1_MB24_DATA1()		bfin_read16(CAN1_MB24_DATA1)
+#define bfin_write_CAN1_MB24_DATA1(val)		bfin_write16(CAN1_MB24_DATA1, val)
+#define bfin_read_CAN1_MB24_DATA2()		bfin_read16(CAN1_MB24_DATA2)
+#define bfin_write_CAN1_MB24_DATA2(val)		bfin_write16(CAN1_MB24_DATA2, val)
+#define bfin_read_CAN1_MB24_DATA3()		bfin_read16(CAN1_MB24_DATA3)
+#define bfin_write_CAN1_MB24_DATA3(val)		bfin_write16(CAN1_MB24_DATA3, val)
+#define bfin_read_CAN1_MB24_LENGTH()		bfin_read16(CAN1_MB24_LENGTH)
+#define bfin_write_CAN1_MB24_LENGTH(val)	bfin_write16(CAN1_MB24_LENGTH, val)
+#define bfin_read_CAN1_MB24_TIMESTAMP()		bfin_read16(CAN1_MB24_TIMESTAMP)
+#define bfin_write_CAN1_MB24_TIMESTAMP(val)	bfin_write16(CAN1_MB24_TIMESTAMP, val)
+#define bfin_read_CAN1_MB24_ID0()		bfin_read16(CAN1_MB24_ID0)
+#define bfin_write_CAN1_MB24_ID0(val)		bfin_write16(CAN1_MB24_ID0, val)
+#define bfin_read_CAN1_MB24_ID1()		bfin_read16(CAN1_MB24_ID1)
+#define bfin_write_CAN1_MB24_ID1(val)		bfin_write16(CAN1_MB24_ID1, val)
+#define bfin_read_CAN1_MB25_DATA0()		bfin_read16(CAN1_MB25_DATA0)
+#define bfin_write_CAN1_MB25_DATA0(val)		bfin_write16(CAN1_MB25_DATA0, val)
+#define bfin_read_CAN1_MB25_DATA1()		bfin_read16(CAN1_MB25_DATA1)
+#define bfin_write_CAN1_MB25_DATA1(val)		bfin_write16(CAN1_MB25_DATA1, val)
+#define bfin_read_CAN1_MB25_DATA2()		bfin_read16(CAN1_MB25_DATA2)
+#define bfin_write_CAN1_MB25_DATA2(val)		bfin_write16(CAN1_MB25_DATA2, val)
+#define bfin_read_CAN1_MB25_DATA3()		bfin_read16(CAN1_MB25_DATA3)
+#define bfin_write_CAN1_MB25_DATA3(val)		bfin_write16(CAN1_MB25_DATA3, val)
+#define bfin_read_CAN1_MB25_LENGTH()		bfin_read16(CAN1_MB25_LENGTH)
+#define bfin_write_CAN1_MB25_LENGTH(val)	bfin_write16(CAN1_MB25_LENGTH, val)
+#define bfin_read_CAN1_MB25_TIMESTAMP()		bfin_read16(CAN1_MB25_TIMESTAMP)
+#define bfin_write_CAN1_MB25_TIMESTAMP(val)	bfin_write16(CAN1_MB25_TIMESTAMP, val)
+#define bfin_read_CAN1_MB25_ID0()		bfin_read16(CAN1_MB25_ID0)
+#define bfin_write_CAN1_MB25_ID0(val)		bfin_write16(CAN1_MB25_ID0, val)
+#define bfin_read_CAN1_MB25_ID1()		bfin_read16(CAN1_MB25_ID1)
+#define bfin_write_CAN1_MB25_ID1(val)		bfin_write16(CAN1_MB25_ID1, val)
+#define bfin_read_CAN1_MB26_DATA0()		bfin_read16(CAN1_MB26_DATA0)
+#define bfin_write_CAN1_MB26_DATA0(val)		bfin_write16(CAN1_MB26_DATA0, val)
+#define bfin_read_CAN1_MB26_DATA1()		bfin_read16(CAN1_MB26_DATA1)
+#define bfin_write_CAN1_MB26_DATA1(val)		bfin_write16(CAN1_MB26_DATA1, val)
+#define bfin_read_CAN1_MB26_DATA2()		bfin_read16(CAN1_MB26_DATA2)
+#define bfin_write_CAN1_MB26_DATA2(val)		bfin_write16(CAN1_MB26_DATA2, val)
+#define bfin_read_CAN1_MB26_DATA3()		bfin_read16(CAN1_MB26_DATA3)
+#define bfin_write_CAN1_MB26_DATA3(val)		bfin_write16(CAN1_MB26_DATA3, val)
+#define bfin_read_CAN1_MB26_LENGTH()		bfin_read16(CAN1_MB26_LENGTH)
+#define bfin_write_CAN1_MB26_LENGTH(val)	bfin_write16(CAN1_MB26_LENGTH, val)
+#define bfin_read_CAN1_MB26_TIMESTAMP()		bfin_read16(CAN1_MB26_TIMESTAMP)
+#define bfin_write_CAN1_MB26_TIMESTAMP(val)	bfin_write16(CAN1_MB26_TIMESTAMP, val)
+#define bfin_read_CAN1_MB26_ID0()		bfin_read16(CAN1_MB26_ID0)
+#define bfin_write_CAN1_MB26_ID0(val)		bfin_write16(CAN1_MB26_ID0, val)
+#define bfin_read_CAN1_MB26_ID1()		bfin_read16(CAN1_MB26_ID1)
+#define bfin_write_CAN1_MB26_ID1(val)		bfin_write16(CAN1_MB26_ID1, val)
+#define bfin_read_CAN1_MB27_DATA0()		bfin_read16(CAN1_MB27_DATA0)
+#define bfin_write_CAN1_MB27_DATA0(val)		bfin_write16(CAN1_MB27_DATA0, val)
+#define bfin_read_CAN1_MB27_DATA1()		bfin_read16(CAN1_MB27_DATA1)
+#define bfin_write_CAN1_MB27_DATA1(val)		bfin_write16(CAN1_MB27_DATA1, val)
+#define bfin_read_CAN1_MB27_DATA2()		bfin_read16(CAN1_MB27_DATA2)
+#define bfin_write_CAN1_MB27_DATA2(val)		bfin_write16(CAN1_MB27_DATA2, val)
+#define bfin_read_CAN1_MB27_DATA3()		bfin_read16(CAN1_MB27_DATA3)
+#define bfin_write_CAN1_MB27_DATA3(val)		bfin_write16(CAN1_MB27_DATA3, val)
+#define bfin_read_CAN1_MB27_LENGTH()		bfin_read16(CAN1_MB27_LENGTH)
+#define bfin_write_CAN1_MB27_LENGTH(val)	bfin_write16(CAN1_MB27_LENGTH, val)
+#define bfin_read_CAN1_MB27_TIMESTAMP()		bfin_read16(CAN1_MB27_TIMESTAMP)
+#define bfin_write_CAN1_MB27_TIMESTAMP(val)	bfin_write16(CAN1_MB27_TIMESTAMP, val)
+#define bfin_read_CAN1_MB27_ID0()		bfin_read16(CAN1_MB27_ID0)
+#define bfin_write_CAN1_MB27_ID0(val)		bfin_write16(CAN1_MB27_ID0, val)
+#define bfin_read_CAN1_MB27_ID1()		bfin_read16(CAN1_MB27_ID1)
+#define bfin_write_CAN1_MB27_ID1(val)		bfin_write16(CAN1_MB27_ID1, val)
+#define bfin_read_CAN1_MB28_DATA0()		bfin_read16(CAN1_MB28_DATA0)
+#define bfin_write_CAN1_MB28_DATA0(val)		bfin_write16(CAN1_MB28_DATA0, val)
+#define bfin_read_CAN1_MB28_DATA1()		bfin_read16(CAN1_MB28_DATA1)
+#define bfin_write_CAN1_MB28_DATA1(val)		bfin_write16(CAN1_MB28_DATA1, val)
+#define bfin_read_CAN1_MB28_DATA2()		bfin_read16(CAN1_MB28_DATA2)
+#define bfin_write_CAN1_MB28_DATA2(val)		bfin_write16(CAN1_MB28_DATA2, val)
+#define bfin_read_CAN1_MB28_DATA3()		bfin_read16(CAN1_MB28_DATA3)
+#define bfin_write_CAN1_MB28_DATA3(val)		bfin_write16(CAN1_MB28_DATA3, val)
+#define bfin_read_CAN1_MB28_LENGTH()		bfin_read16(CAN1_MB28_LENGTH)
+#define bfin_write_CAN1_MB28_LENGTH(val)	bfin_write16(CAN1_MB28_LENGTH, val)
+#define bfin_read_CAN1_MB28_TIMESTAMP()		bfin_read16(CAN1_MB28_TIMESTAMP)
+#define bfin_write_CAN1_MB28_TIMESTAMP(val)	bfin_write16(CAN1_MB28_TIMESTAMP, val)
+#define bfin_read_CAN1_MB28_ID0()		bfin_read16(CAN1_MB28_ID0)
+#define bfin_write_CAN1_MB28_ID0(val)		bfin_write16(CAN1_MB28_ID0, val)
+#define bfin_read_CAN1_MB28_ID1()		bfin_read16(CAN1_MB28_ID1)
+#define bfin_write_CAN1_MB28_ID1(val)		bfin_write16(CAN1_MB28_ID1, val)
+#define bfin_read_CAN1_MB29_DATA0()		bfin_read16(CAN1_MB29_DATA0)
+#define bfin_write_CAN1_MB29_DATA0(val)		bfin_write16(CAN1_MB29_DATA0, val)
+#define bfin_read_CAN1_MB29_DATA1()		bfin_read16(CAN1_MB29_DATA1)
+#define bfin_write_CAN1_MB29_DATA1(val)		bfin_write16(CAN1_MB29_DATA1, val)
+#define bfin_read_CAN1_MB29_DATA2()		bfin_read16(CAN1_MB29_DATA2)
+#define bfin_write_CAN1_MB29_DATA2(val)		bfin_write16(CAN1_MB29_DATA2, val)
+#define bfin_read_CAN1_MB29_DATA3()		bfin_read16(CAN1_MB29_DATA3)
+#define bfin_write_CAN1_MB29_DATA3(val)		bfin_write16(CAN1_MB29_DATA3, val)
+#define bfin_read_CAN1_MB29_LENGTH()		bfin_read16(CAN1_MB29_LENGTH)
+#define bfin_write_CAN1_MB29_LENGTH(val)	bfin_write16(CAN1_MB29_LENGTH, val)
+#define bfin_read_CAN1_MB29_TIMESTAMP()		bfin_read16(CAN1_MB29_TIMESTAMP)
+#define bfin_write_CAN1_MB29_TIMESTAMP(val)	bfin_write16(CAN1_MB29_TIMESTAMP, val)
+#define bfin_read_CAN1_MB29_ID0()		bfin_read16(CAN1_MB29_ID0)
+#define bfin_write_CAN1_MB29_ID0(val)		bfin_write16(CAN1_MB29_ID0, val)
+#define bfin_read_CAN1_MB29_ID1()		bfin_read16(CAN1_MB29_ID1)
+#define bfin_write_CAN1_MB29_ID1(val)		bfin_write16(CAN1_MB29_ID1, val)
+#define bfin_read_CAN1_MB30_DATA0()		bfin_read16(CAN1_MB30_DATA0)
+#define bfin_write_CAN1_MB30_DATA0(val)		bfin_write16(CAN1_MB30_DATA0, val)
+#define bfin_read_CAN1_MB30_DATA1()		bfin_read16(CAN1_MB30_DATA1)
+#define bfin_write_CAN1_MB30_DATA1(val)		bfin_write16(CAN1_MB30_DATA1, val)
+#define bfin_read_CAN1_MB30_DATA2()		bfin_read16(CAN1_MB30_DATA2)
+#define bfin_write_CAN1_MB30_DATA2(val)		bfin_write16(CAN1_MB30_DATA2, val)
+#define bfin_read_CAN1_MB30_DATA3()		bfin_read16(CAN1_MB30_DATA3)
+#define bfin_write_CAN1_MB30_DATA3(val)		bfin_write16(CAN1_MB30_DATA3, val)
+#define bfin_read_CAN1_MB30_LENGTH()		bfin_read16(CAN1_MB30_LENGTH)
+#define bfin_write_CAN1_MB30_LENGTH(val)	bfin_write16(CAN1_MB30_LENGTH, val)
+#define bfin_read_CAN1_MB30_TIMESTAMP()		bfin_read16(CAN1_MB30_TIMESTAMP)
+#define bfin_write_CAN1_MB30_TIMESTAMP(val)	bfin_write16(CAN1_MB30_TIMESTAMP, val)
+#define bfin_read_CAN1_MB30_ID0()		bfin_read16(CAN1_MB30_ID0)
+#define bfin_write_CAN1_MB30_ID0(val)		bfin_write16(CAN1_MB30_ID0, val)
+#define bfin_read_CAN1_MB30_ID1()		bfin_read16(CAN1_MB30_ID1)
+#define bfin_write_CAN1_MB30_ID1(val)		bfin_write16(CAN1_MB30_ID1, val)
+#define bfin_read_CAN1_MB31_DATA0()		bfin_read16(CAN1_MB31_DATA0)
+#define bfin_write_CAN1_MB31_DATA0(val)		bfin_write16(CAN1_MB31_DATA0, val)
+#define bfin_read_CAN1_MB31_DATA1()		bfin_read16(CAN1_MB31_DATA1)
+#define bfin_write_CAN1_MB31_DATA1(val)		bfin_write16(CAN1_MB31_DATA1, val)
+#define bfin_read_CAN1_MB31_DATA2()		bfin_read16(CAN1_MB31_DATA2)
+#define bfin_write_CAN1_MB31_DATA2(val)		bfin_write16(CAN1_MB31_DATA2, val)
+#define bfin_read_CAN1_MB31_DATA3()		bfin_read16(CAN1_MB31_DATA3)
+#define bfin_write_CAN1_MB31_DATA3(val)		bfin_write16(CAN1_MB31_DATA3, val)
+#define bfin_read_CAN1_MB31_LENGTH()		bfin_read16(CAN1_MB31_LENGTH)
+#define bfin_write_CAN1_MB31_LENGTH(val)	bfin_write16(CAN1_MB31_LENGTH, val)
+#define bfin_read_CAN1_MB31_TIMESTAMP()		bfin_read16(CAN1_MB31_TIMESTAMP)
+#define bfin_write_CAN1_MB31_TIMESTAMP(val)	bfin_write16(CAN1_MB31_TIMESTAMP, val)
+#define bfin_read_CAN1_MB31_ID0()		bfin_read16(CAN1_MB31_ID0)
+#define bfin_write_CAN1_MB31_ID0(val)		bfin_write16(CAN1_MB31_ID0, val)
+#define bfin_read_CAN1_MB31_ID1()		bfin_read16(CAN1_MB31_ID1)
+#define bfin_write_CAN1_MB31_ID1(val)		bfin_write16(CAN1_MB31_ID1, val)
+
+#endif /* _CDEF_BF548_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF549.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
new file mode 100644
index 0000000..002136a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
@@ -0,0 +1,302 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _CDEF_BF549_H
+#define _CDEF_BF549_H
+
+/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
+#include "cdefBF54x_base.h"
+
+/* The BF549 is like the BF544, but has MXVR */
+#include "cdefBF547.h"
+
+/* MXVR Registers */
+
+#define bfin_read_MXVR_CONFIG()			bfin_read16(MXVR_CONFIG)
+#define bfin_write_MXVR_CONFIG(val)		bfin_write16(MXVR_CONFIG, val)
+#define bfin_read_MXVR_STATE_0()		bfin_read32(MXVR_STATE_0)
+#define bfin_write_MXVR_STATE_0(val)		bfin_write32(MXVR_STATE_0, val)
+#define bfin_read_MXVR_STATE_1()		bfin_read32(MXVR_STATE_1)
+#define bfin_write_MXVR_STATE_1(val)		bfin_write32(MXVR_STATE_1, val)
+#define bfin_read_MXVR_INT_STAT_0()		bfin_read32(MXVR_INT_STAT_0)
+#define bfin_write_MXVR_INT_STAT_0(val)		bfin_write32(MXVR_INT_STAT_0, val)
+#define bfin_read_MXVR_INT_STAT_1()		bfin_read32(MXVR_INT_STAT_1)
+#define bfin_write_MXVR_INT_STAT_1(val)		bfin_write32(MXVR_INT_STAT_1, val)
+#define bfin_read_MXVR_INT_EN_0()		bfin_read32(MXVR_INT_EN_0)
+#define bfin_write_MXVR_INT_EN_0(val)		bfin_write32(MXVR_INT_EN_0, val)
+#define bfin_read_MXVR_INT_EN_1()		bfin_read32(MXVR_INT_EN_1)
+#define bfin_write_MXVR_INT_EN_1(val)		bfin_write32(MXVR_INT_EN_1, val)
+#define bfin_read_MXVR_POSITION()		bfin_read16(MXVR_POSITION)
+#define bfin_write_MXVR_POSITION(val)		bfin_write16(MXVR_POSITION, val)
+#define bfin_read_MXVR_MAX_POSITION()		bfin_read16(MXVR_MAX_POSITION)
+#define bfin_write_MXVR_MAX_POSITION(val)	bfin_write16(MXVR_MAX_POSITION, val)
+#define bfin_read_MXVR_DELAY()			bfin_read16(MXVR_DELAY)
+#define bfin_write_MXVR_DELAY(val)		bfin_write16(MXVR_DELAY, val)
+#define bfin_read_MXVR_MAX_DELAY()		bfin_read16(MXVR_MAX_DELAY)
+#define bfin_write_MXVR_MAX_DELAY(val)		bfin_write16(MXVR_MAX_DELAY, val)
+#define bfin_read_MXVR_LADDR()			bfin_read32(MXVR_LADDR)
+#define bfin_write_MXVR_LADDR(val)		bfin_write32(MXVR_LADDR, val)
+#define bfin_read_MXVR_GADDR()			bfin_read16(MXVR_GADDR)
+#define bfin_write_MXVR_GADDR(val)		bfin_write16(MXVR_GADDR, val)
+#define bfin_read_MXVR_AADDR()			bfin_read32(MXVR_AADDR)
+#define bfin_write_MXVR_AADDR(val)		bfin_write32(MXVR_AADDR, val)
+
+/* MXVR Allocation Table Registers */
+
+#define bfin_read_MXVR_ALLOC_0()		bfin_read32(MXVR_ALLOC_0)
+#define bfin_write_MXVR_ALLOC_0(val)		bfin_write32(MXVR_ALLOC_0, val)
+#define bfin_read_MXVR_ALLOC_1()		bfin_read32(MXVR_ALLOC_1)
+#define bfin_write_MXVR_ALLOC_1(val)		bfin_write32(MXVR_ALLOC_1, val)
+#define bfin_read_MXVR_ALLOC_2()		bfin_read32(MXVR_ALLOC_2)
+#define bfin_write_MXVR_ALLOC_2(val)		bfin_write32(MXVR_ALLOC_2, val)
+#define bfin_read_MXVR_ALLOC_3()		bfin_read32(MXVR_ALLOC_3)
+#define bfin_write_MXVR_ALLOC_3(val)		bfin_write32(MXVR_ALLOC_3, val)
+#define bfin_read_MXVR_ALLOC_4()		bfin_read32(MXVR_ALLOC_4)
+#define bfin_write_MXVR_ALLOC_4(val)		bfin_write32(MXVR_ALLOC_4, val)
+#define bfin_read_MXVR_ALLOC_5()		bfin_read32(MXVR_ALLOC_5)
+#define bfin_write_MXVR_ALLOC_5(val)		bfin_write32(MXVR_ALLOC_5, val)
+#define bfin_read_MXVR_ALLOC_6()		bfin_read32(MXVR_ALLOC_6)
+#define bfin_write_MXVR_ALLOC_6(val)		bfin_write32(MXVR_ALLOC_6, val)
+#define bfin_read_MXVR_ALLOC_7()		bfin_read32(MXVR_ALLOC_7)
+#define bfin_write_MXVR_ALLOC_7(val)		bfin_write32(MXVR_ALLOC_7, val)
+#define bfin_read_MXVR_ALLOC_8()		bfin_read32(MXVR_ALLOC_8)
+#define bfin_write_MXVR_ALLOC_8(val)		bfin_write32(MXVR_ALLOC_8, val)
+#define bfin_read_MXVR_ALLOC_9()		bfin_read32(MXVR_ALLOC_9)
+#define bfin_write_MXVR_ALLOC_9(val)		bfin_write32(MXVR_ALLOC_9, val)
+#define bfin_read_MXVR_ALLOC_10()		bfin_read32(MXVR_ALLOC_10)
+#define bfin_write_MXVR_ALLOC_10(val)		bfin_write32(MXVR_ALLOC_10, val)
+#define bfin_read_MXVR_ALLOC_11()		bfin_read32(MXVR_ALLOC_11)
+#define bfin_write_MXVR_ALLOC_11(val)		bfin_write32(MXVR_ALLOC_11, val)
+#define bfin_read_MXVR_ALLOC_12()		bfin_read32(MXVR_ALLOC_12)
+#define bfin_write_MXVR_ALLOC_12(val)		bfin_write32(MXVR_ALLOC_12, val)
+#define bfin_read_MXVR_ALLOC_13()		bfin_read32(MXVR_ALLOC_13)
+#define bfin_write_MXVR_ALLOC_13(val)		bfin_write32(MXVR_ALLOC_13, val)
+#define bfin_read_MXVR_ALLOC_14()		bfin_read32(MXVR_ALLOC_14)
+#define bfin_write_MXVR_ALLOC_14(val)		bfin_write32(MXVR_ALLOC_14, val)
+
+/* MXVR Channel Assign Registers */
+
+#define bfin_read_MXVR_SYNC_LCHAN_0()		bfin_read32(MXVR_SYNC_LCHAN_0)
+#define bfin_write_MXVR_SYNC_LCHAN_0(val)	bfin_write32(MXVR_SYNC_LCHAN_0, val)
+#define bfin_read_MXVR_SYNC_LCHAN_1()		bfin_read32(MXVR_SYNC_LCHAN_1)
+#define bfin_write_MXVR_SYNC_LCHAN_1(val)	bfin_write32(MXVR_SYNC_LCHAN_1, val)
+#define bfin_read_MXVR_SYNC_LCHAN_2()		bfin_read32(MXVR_SYNC_LCHAN_2)
+#define bfin_write_MXVR_SYNC_LCHAN_2(val)	bfin_write32(MXVR_SYNC_LCHAN_2, val)
+#define bfin_read_MXVR_SYNC_LCHAN_3()		bfin_read32(MXVR_SYNC_LCHAN_3)
+#define bfin_write_MXVR_SYNC_LCHAN_3(val)	bfin_write32(MXVR_SYNC_LCHAN_3, val)
+#define bfin_read_MXVR_SYNC_LCHAN_4()		bfin_read32(MXVR_SYNC_LCHAN_4)
+#define bfin_write_MXVR_SYNC_LCHAN_4(val)	bfin_write32(MXVR_SYNC_LCHAN_4, val)
+#define bfin_read_MXVR_SYNC_LCHAN_5()		bfin_read32(MXVR_SYNC_LCHAN_5)
+#define bfin_write_MXVR_SYNC_LCHAN_5(val)	bfin_write32(MXVR_SYNC_LCHAN_5, val)
+#define bfin_read_MXVR_SYNC_LCHAN_6()		bfin_read32(MXVR_SYNC_LCHAN_6)
+#define bfin_write_MXVR_SYNC_LCHAN_6(val)	bfin_write32(MXVR_SYNC_LCHAN_6, val)
+#define bfin_read_MXVR_SYNC_LCHAN_7()		bfin_read32(MXVR_SYNC_LCHAN_7)
+#define bfin_write_MXVR_SYNC_LCHAN_7(val)	bfin_write32(MXVR_SYNC_LCHAN_7, val)
+
+/* MXVR DMA0 Registers */
+
+#define bfin_read_MXVR_DMA0_CONFIG()		bfin_read32(MXVR_DMA0_CONFIG)
+#define bfin_write_MXVR_DMA0_CONFIG(val)	bfin_write32(MXVR_DMA0_CONFIG, val)
+#define bfin_read_MXVR_DMA0_START_ADDR()	bfin_read32(MXVR_DMA0_START_ADDR)
+#define bfin_write_MXVR_DMA0_START_ADDR(val)	bfin_write32(MXVR_DMA0_START_ADDR)
+#define bfin_read_MXVR_DMA0_COUNT()		bfin_read16(MXVR_DMA0_COUNT)
+#define bfin_write_MXVR_DMA0_COUNT(val)		bfin_write16(MXVR_DMA0_COUNT, val)
+#define bfin_read_MXVR_DMA0_CURR_ADDR()		bfin_read32(MXVR_DMA0_CURR_ADDR)
+#define bfin_write_MXVR_DMA0_CURR_ADDR(val)	bfin_write32(MXVR_DMA0_CURR_ADDR)
+#define bfin_read_MXVR_DMA0_CURR_COUNT()	bfin_read16(MXVR_DMA0_CURR_COUNT)
+#define bfin_write_MXVR_DMA0_CURR_COUNT(val)	bfin_write16(MXVR_DMA0_CURR_COUNT, val)
+
+/* MXVR DMA1 Registers */
+
+#define bfin_read_MXVR_DMA1_CONFIG()		bfin_read32(MXVR_DMA1_CONFIG)
+#define bfin_write_MXVR_DMA1_CONFIG(val)	bfin_write32(MXVR_DMA1_CONFIG, val)
+#define bfin_read_MXVR_DMA1_START_ADDR()	bfin_read32(MXVR_DMA1_START_ADDR)
+#define bfin_write_MXVR_DMA1_START_ADDR(val)	bfin_write32(MXVR_DMA1_START_ADDR)
+#define bfin_read_MXVR_DMA1_COUNT()		bfin_read16(MXVR_DMA1_COUNT)
+#define bfin_write_MXVR_DMA1_COUNT(val)		bfin_write16(MXVR_DMA1_COUNT, val)
+#define bfin_read_MXVR_DMA1_CURR_ADDR()		bfin_read32(MXVR_DMA1_CURR_ADDR)
+#define bfin_write_MXVR_DMA1_CURR_ADDR(val)	bfin_write32(MXVR_DMA1_CURR_ADDR)
+#define bfin_read_MXVR_DMA1_CURR_COUNT()	bfin_read16(MXVR_DMA1_CURR_COUNT)
+#define bfin_write_MXVR_DMA1_CURR_COUNT(val)	bfin_write16(MXVR_DMA1_CURR_COUNT, val)
+
+/* MXVR DMA2 Registers */
+
+#define bfin_read_MXVR_DMA2_CONFIG()		bfin_read32(MXVR_DMA2_CONFIG)
+#define bfin_write_MXVR_DMA2_CONFIG(val)	bfin_write32(MXVR_DMA2_CONFIG, val)
+#define bfin_read_MXVR_DMA2_START_ADDR() 	bfin_read32(MXVR_DMA2_START_ADDR)
+#define bfin_write_MXVR_DMA2_START_ADDR(val) 	bfin_write32(MXVR_DMA2_START_ADDR)
+#define bfin_read_MXVR_DMA2_COUNT()		bfin_read16(MXVR_DMA2_COUNT)
+#define bfin_write_MXVR_DMA2_COUNT(val)		bfin_write16(MXVR_DMA2_COUNT, val)
+#define bfin_read_MXVR_DMA2_CURR_ADDR() 	bfin_read32(MXVR_DMA2_CURR_ADDR)
+#define bfin_write_MXVR_DMA2_CURR_ADDR(val) 	bfin_write32(MXVR_DMA2_CURR_ADDR)
+#define bfin_read_MXVR_DMA2_CURR_COUNT()	bfin_read16(MXVR_DMA2_CURR_COUNT)
+#define bfin_write_MXVR_DMA2_CURR_COUNT(val)	bfin_write16(MXVR_DMA2_CURR_COUNT, val)
+
+/* MXVR DMA3 Registers */
+
+#define bfin_read_MXVR_DMA3_CONFIG()		bfin_read32(MXVR_DMA3_CONFIG)
+#define bfin_write_MXVR_DMA3_CONFIG(val)	bfin_write32(MXVR_DMA3_CONFIG, val)
+#define bfin_read_MXVR_DMA3_START_ADDR() 	bfin_read32(MXVR_DMA3_START_ADDR)
+#define bfin_write_MXVR_DMA3_START_ADDR(val) 	bfin_write32(MXVR_DMA3_START_ADDR)
+#define bfin_read_MXVR_DMA3_COUNT()		bfin_read16(MXVR_DMA3_COUNT)
+#define bfin_write_MXVR_DMA3_COUNT(val)		bfin_write16(MXVR_DMA3_COUNT, val)
+#define bfin_read_MXVR_DMA3_CURR_ADDR() 	bfin_read32(MXVR_DMA3_CURR_ADDR)
+#define bfin_write_MXVR_DMA3_CURR_ADDR(val) 	bfin_write32(MXVR_DMA3_CURR_ADDR)
+#define bfin_read_MXVR_DMA3_CURR_COUNT()	bfin_read16(MXVR_DMA3_CURR_COUNT)
+#define bfin_write_MXVR_DMA3_CURR_COUNT(val)	bfin_write16(MXVR_DMA3_CURR_COUNT, val)
+
+/* MXVR DMA4 Registers */
+
+#define bfin_read_MXVR_DMA4_CONFIG()		bfin_read32(MXVR_DMA4_CONFIG)
+#define bfin_write_MXVR_DMA4_CONFIG(val)	bfin_write32(MXVR_DMA4_CONFIG, val)
+#define bfin_read_MXVR_DMA4_START_ADDR() 	bfin_read32(MXVR_DMA4_START_ADDR)
+#define bfin_write_MXVR_DMA4_START_ADDR(val) 	bfin_write32(MXVR_DMA4_START_ADDR)
+#define bfin_read_MXVR_DMA4_COUNT()		bfin_read16(MXVR_DMA4_COUNT)
+#define bfin_write_MXVR_DMA4_COUNT(val)		bfin_write16(MXVR_DMA4_COUNT, val)
+#define bfin_read_MXVR_DMA4_CURR_ADDR() 	bfin_read32(MXVR_DMA4_CURR_ADDR)
+#define bfin_write_MXVR_DMA4_CURR_ADDR(val) 	bfin_write32(MXVR_DMA4_CURR_ADDR)
+#define bfin_read_MXVR_DMA4_CURR_COUNT()	bfin_read16(MXVR_DMA4_CURR_COUNT)
+#define bfin_write_MXVR_DMA4_CURR_COUNT(val)	bfin_write16(MXVR_DMA4_CURR_COUNT, val)
+
+/* MXVR DMA5 Registers */
+
+#define bfin_read_MXVR_DMA5_CONFIG()		bfin_read32(MXVR_DMA5_CONFIG)
+#define bfin_write_MXVR_DMA5_CONFIG(val)	bfin_write32(MXVR_DMA5_CONFIG, val)
+#define bfin_read_MXVR_DMA5_START_ADDR() 	bfin_read32(MXVR_DMA5_START_ADDR)
+#define bfin_write_MXVR_DMA5_START_ADDR(val) 	bfin_write32(MXVR_DMA5_START_ADDR)
+#define bfin_read_MXVR_DMA5_COUNT()		bfin_read16(MXVR_DMA5_COUNT)
+#define bfin_write_MXVR_DMA5_COUNT(val)		bfin_write16(MXVR_DMA5_COUNT, val)
+#define bfin_read_MXVR_DMA5_CURR_ADDR() 	bfin_read32(MXVR_DMA5_CURR_ADDR)
+#define bfin_write_MXVR_DMA5_CURR_ADDR(val) 	bfin_write32(MXVR_DMA5_CURR_ADDR)
+#define bfin_read_MXVR_DMA5_CURR_COUNT()	bfin_read16(MXVR_DMA5_CURR_COUNT)
+#define bfin_write_MXVR_DMA5_CURR_COUNT(val)	bfin_write16(MXVR_DMA5_CURR_COUNT, val)
+
+/* MXVR DMA6 Registers */
+
+#define bfin_read_MXVR_DMA6_CONFIG()		bfin_read32(MXVR_DMA6_CONFIG)
+#define bfin_write_MXVR_DMA6_CONFIG(val)	bfin_write32(MXVR_DMA6_CONFIG, val)
+#define bfin_read_MXVR_DMA6_START_ADDR() 	bfin_read32(MXVR_DMA6_START_ADDR)
+#define bfin_write_MXVR_DMA6_START_ADDR(val) 	bfin_write32(MXVR_DMA6_START_ADDR)
+#define bfin_read_MXVR_DMA6_COUNT()		bfin_read16(MXVR_DMA6_COUNT)
+#define bfin_write_MXVR_DMA6_COUNT(val)		bfin_write16(MXVR_DMA6_COUNT, val)
+#define bfin_read_MXVR_DMA6_CURR_ADDR() 	bfin_read32(MXVR_DMA6_CURR_ADDR)
+#define bfin_write_MXVR_DMA6_CURR_ADDR(val) 	bfin_write32(MXVR_DMA6_CURR_ADDR)
+#define bfin_read_MXVR_DMA6_CURR_COUNT()	bfin_read16(MXVR_DMA6_CURR_COUNT)
+#define bfin_write_MXVR_DMA6_CURR_COUNT(val)	bfin_write16(MXVR_DMA6_CURR_COUNT, val)
+
+/* MXVR DMA7 Registers */
+
+#define bfin_read_MXVR_DMA7_CONFIG()		bfin_read32(MXVR_DMA7_CONFIG)
+#define bfin_write_MXVR_DMA7_CONFIG(val)	bfin_write32(MXVR_DMA7_CONFIG, val)
+#define bfin_read_MXVR_DMA7_START_ADDR() 	bfin_read32(MXVR_DMA7_START_ADDR)
+#define bfin_write_MXVR_DMA7_START_ADDR(val) 	bfin_write32(MXVR_DMA7_START_ADDR)
+#define bfin_read_MXVR_DMA7_COUNT()		bfin_read16(MXVR_DMA7_COUNT)
+#define bfin_write_MXVR_DMA7_COUNT(val)		bfin_write16(MXVR_DMA7_COUNT, val)
+#define bfin_read_MXVR_DMA7_CURR_ADDR() 	bfin_read32(MXVR_DMA7_CURR_ADDR)
+#define bfin_write_MXVR_DMA7_CURR_ADDR(val) 	bfin_write32(MXVR_DMA7_CURR_ADDR)
+#define bfin_read_MXVR_DMA7_CURR_COUNT()	bfin_read16(MXVR_DMA7_CURR_COUNT)
+#define bfin_write_MXVR_DMA7_CURR_COUNT(val)	bfin_write16(MXVR_DMA7_CURR_COUNT, val)
+
+/* MXVR Asynch Packet Registers */
+
+#define bfin_read_MXVR_AP_CTL()			bfin_read16(MXVR_AP_CTL)
+#define bfin_write_MXVR_AP_CTL(val)		bfin_write16(MXVR_AP_CTL, val)
+#define bfin_read_MXVR_APRB_START_ADDR() 	bfin_read32(MXVR_APRB_START_ADDR)
+#define bfin_write_MXVR_APRB_START_ADDR(val) 	bfin_write32(MXVR_APRB_START_ADDR)
+#define bfin_read_MXVR_APRB_CURR_ADDR() 	bfin_read32(MXVR_APRB_CURR_ADDR)
+#define bfin_write_MXVR_APRB_CURR_ADDR(val) 	bfin_write32(MXVR_APRB_CURR_ADDR)
+#define bfin_read_MXVR_APTB_START_ADDR() 	bfin_read32(MXVR_APTB_START_ADDR)
+#define bfin_write_MXVR_APTB_START_ADDR(val) 	bfin_write32(MXVR_APTB_START_ADDR)
+#define bfin_read_MXVR_APTB_CURR_ADDR() 	bfin_read32(MXVR_APTB_CURR_ADDR)
+#define bfin_write_MXVR_APTB_CURR_ADDR(val) 	bfin_write32(MXVR_APTB_CURR_ADDR)
+
+/* MXVR Control Message Registers */
+
+#define bfin_read_MXVR_CM_CTL()			bfin_read32(MXVR_CM_CTL)
+#define bfin_write_MXVR_CM_CTL(val)		bfin_write32(MXVR_CM_CTL, val)
+#define bfin_read_MXVR_CMRB_START_ADDR() 	bfin_read32(MXVR_CMRB_START_ADDR)
+#define bfin_write_MXVR_CMRB_START_ADDR(val) 	bfin_write32(MXVR_CMRB_START_ADDR)
+#define bfin_read_MXVR_CMRB_CURR_ADDR() 	bfin_read32(MXVR_CMRB_CURR_ADDR)
+#define bfin_write_MXVR_CMRB_CURR_ADDR(val) 	bfin_write32(MXVR_CMRB_CURR_ADDR)
+#define bfin_read_MXVR_CMTB_START_ADDR() 	bfin_read32(MXVR_CMTB_START_ADDR)
+#define bfin_write_MXVR_CMTB_START_ADDR(val) 	bfin_write32(MXVR_CMTB_START_ADDR)
+#define bfin_read_MXVR_CMTB_CURR_ADDR() 	bfin_read32(MXVR_CMTB_CURR_ADDR)
+#define bfin_write_MXVR_CMTB_CURR_ADDR(val) 	bfin_write32(MXVR_CMTB_CURR_ADDR)
+
+/* MXVR Remote Read Registers */
+
+#define bfin_read_MXVR_RRDB_START_ADDR() 	bfin_read32(MXVR_RRDB_START_ADDR)
+#define bfin_write_MXVR_RRDB_START_ADDR(val) 	bfin_write32(MXVR_RRDB_START_ADDR)
+#define bfin_read_MXVR_RRDB_CURR_ADDR() 	bfin_read32(MXVR_RRDB_CURR_ADDR)
+#define bfin_write_MXVR_RRDB_CURR_ADDR(val) 	bfin_write32(MXVR_RRDB_CURR_ADDR)
+
+/* MXVR Pattern Data Registers */
+
+#define bfin_read_MXVR_PAT_DATA_0()		bfin_read32(MXVR_PAT_DATA_0)
+#define bfin_write_MXVR_PAT_DATA_0(val)		bfin_write32(MXVR_PAT_DATA_0, val)
+#define bfin_read_MXVR_PAT_EN_0()		bfin_read32(MXVR_PAT_EN_0)
+#define bfin_write_MXVR_PAT_EN_0(val)		bfin_write32(MXVR_PAT_EN_0, val)
+#define bfin_read_MXVR_PAT_DATA_1()		bfin_read32(MXVR_PAT_DATA_1)
+#define bfin_write_MXVR_PAT_DATA_1(val)		bfin_write32(MXVR_PAT_DATA_1, val)
+#define bfin_read_MXVR_PAT_EN_1()		bfin_read32(MXVR_PAT_EN_1)
+#define bfin_write_MXVR_PAT_EN_1(val)		bfin_write32(MXVR_PAT_EN_1, val)
+
+/* MXVR Frame Counter Registers */
+
+#define bfin_read_MXVR_FRAME_CNT_0()		bfin_read16(MXVR_FRAME_CNT_0)
+#define bfin_write_MXVR_FRAME_CNT_0(val)	bfin_write16(MXVR_FRAME_CNT_0, val)
+#define bfin_read_MXVR_FRAME_CNT_1()		bfin_read16(MXVR_FRAME_CNT_1)
+#define bfin_write_MXVR_FRAME_CNT_1(val)	bfin_write16(MXVR_FRAME_CNT_1, val)
+
+/* MXVR Routing Table Registers */
+
+#define bfin_read_MXVR_ROUTING_0()		bfin_read32(MXVR_ROUTING_0)
+#define bfin_write_MXVR_ROUTING_0(val)		bfin_write32(MXVR_ROUTING_0, val)
+#define bfin_read_MXVR_ROUTING_1()		bfin_read32(MXVR_ROUTING_1)
+#define bfin_write_MXVR_ROUTING_1(val)		bfin_write32(MXVR_ROUTING_1, val)
+#define bfin_read_MXVR_ROUTING_2()		bfin_read32(MXVR_ROUTING_2)
+#define bfin_write_MXVR_ROUTING_2(val)		bfin_write32(MXVR_ROUTING_2, val)
+#define bfin_read_MXVR_ROUTING_3()		bfin_read32(MXVR_ROUTING_3)
+#define bfin_write_MXVR_ROUTING_3(val)		bfin_write32(MXVR_ROUTING_3, val)
+#define bfin_read_MXVR_ROUTING_4()		bfin_read32(MXVR_ROUTING_4)
+#define bfin_write_MXVR_ROUTING_4(val)		bfin_write32(MXVR_ROUTING_4, val)
+#define bfin_read_MXVR_ROUTING_5()		bfin_read32(MXVR_ROUTING_5)
+#define bfin_write_MXVR_ROUTING_5(val)		bfin_write32(MXVR_ROUTING_5, val)
+#define bfin_read_MXVR_ROUTING_6()		bfin_read32(MXVR_ROUTING_6)
+#define bfin_write_MXVR_ROUTING_6(val)		bfin_write32(MXVR_ROUTING_6, val)
+#define bfin_read_MXVR_ROUTING_7()		bfin_read32(MXVR_ROUTING_7)
+#define bfin_write_MXVR_ROUTING_7(val)		bfin_write32(MXVR_ROUTING_7, val)
+#define bfin_read_MXVR_ROUTING_8()		bfin_read32(MXVR_ROUTING_8)
+#define bfin_write_MXVR_ROUTING_8(val)		bfin_write32(MXVR_ROUTING_8, val)
+#define bfin_read_MXVR_ROUTING_9()		bfin_read32(MXVR_ROUTING_9)
+#define bfin_write_MXVR_ROUTING_9(val)		bfin_write32(MXVR_ROUTING_9, val)
+#define bfin_read_MXVR_ROUTING_10()		bfin_read32(MXVR_ROUTING_10)
+#define bfin_write_MXVR_ROUTING_10(val)		bfin_write32(MXVR_ROUTING_10, val)
+#define bfin_read_MXVR_ROUTING_11()		bfin_read32(MXVR_ROUTING_11)
+#define bfin_write_MXVR_ROUTING_11(val)		bfin_write32(MXVR_ROUTING_11, val)
+#define bfin_read_MXVR_ROUTING_12()		bfin_read32(MXVR_ROUTING_12)
+#define bfin_write_MXVR_ROUTING_12(val)		bfin_write32(MXVR_ROUTING_12, val)
+#define bfin_read_MXVR_ROUTING_13()		bfin_read32(MXVR_ROUTING_13)
+#define bfin_write_MXVR_ROUTING_13(val)		bfin_write32(MXVR_ROUTING_13, val)
+#define bfin_read_MXVR_ROUTING_14()		bfin_read32(MXVR_ROUTING_14)
+#define bfin_write_MXVR_ROUTING_14(val)		bfin_write32(MXVR_ROUTING_14, val)
+
+/* MXVR Counter-Clock-Control Registers */
+
+#define bfin_read_MXVR_BLOCK_CNT()		bfin_read16(MXVR_BLOCK_CNT)
+#define bfin_write_MXVR_BLOCK_CNT(val)		bfin_write16(MXVR_BLOCK_CNT, val)
+#define bfin_read_MXVR_CLK_CTL()		bfin_read32(MXVR_CLK_CTL)
+#define bfin_write_MXVR_CLK_CTL(val)		bfin_write32(MXVR_CLK_CTL, val)
+#define bfin_read_MXVR_CDRPLL_CTL()		bfin_read32(MXVR_CDRPLL_CTL)
+#define bfin_write_MXVR_CDRPLL_CTL(val)		bfin_write32(MXVR_CDRPLL_CTL, val)
+#define bfin_read_MXVR_FMPLL_CTL()		bfin_read32(MXVR_FMPLL_CTL)
+#define bfin_write_MXVR_FMPLL_CTL(val)		bfin_write32(MXVR_FMPLL_CTL, val)
+#define bfin_read_MXVR_PIN_CTL()		bfin_read16(MXVR_PIN_CTL)
+#define bfin_write_MXVR_PIN_CTL(val)		bfin_write16(MXVR_PIN_CTL, val)
+#define bfin_read_MXVR_SCLK_CNT()		bfin_read16(MXVR_SCLK_CNT)
+#define bfin_write_MXVR_SCLK_CNT(val)		bfin_write16(MXVR_SCLK_CNT, val)
+
+#endif /* _CDEF_BF549_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
new file mode 100644
index 0000000..50c89c8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
@@ -0,0 +1,2633 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _CDEF_BF54X_H
+#define _CDEF_BF54X_H
+
+/* ************************************************************** */
+/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF54x    */
+/* ************************************************************** */
+
+/* PLL Registers */
+
+#define bfin_read_PLL_CTL()		bfin_read16(PLL_CTL)
+#define bfin_read_PLL_DIV()		bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val)		bfin_write16(PLL_DIV, val)
+#define bfin_read_VR_CTL()		bfin_read16(VR_CTL)
+#define bfin_read_PLL_STAT()		bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val)	bfin_write16(PLL_STAT, val)
+#define bfin_read_PLL_LOCKCNT()		bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val)	bfin_write16(PLL_LOCKCNT, val)
+
+/* Debug/MP/Emulation Registers (0xFFC00014 - 0xFFC00014) */
+
+#define bfin_read_CHIPID()		bfin_read32(CHIPID)
+#define bfin_write_CHIPID(val)		bfin_write32(CHIPID, val)
+
+/* System Reset and Interrubfin_read_()t Controller (0xFFC00100 - 0xFFC00104) */
+
+#define bfin_read_SWRST()		bfin_read16(SWRST)
+#define bfin_write_SWRST(val)		bfin_write16(SWRST, val)
+#define bfin_read_SYSCR()		bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val)		bfin_write16(SYSCR, val)
+
+/* SIC Registers */
+
+#define bfin_read_SIC_RVECT()		bfin_read32(SIC_RVECT)
+#define bfin_write_SIC_RVECT(val)	bfin_write32(SIC_RVECT, val)
+#define bfin_read_SIC_IMASK0()		bfin_read32(SIC_IMASK0)
+#define bfin_write_SIC_IMASK0(val)	bfin_write32(SIC_IMASK0, val)
+#define bfin_read_SIC_IMASK1()		bfin_read32(SIC_IMASK1)
+#define bfin_write_SIC_IMASK1(val)	bfin_write32(SIC_IMASK1, val)
+#define bfin_read_SIC_IMASK2()		bfin_read32(SIC_IMASK2)
+#define bfin_write_SIC_IMASK2(val)	bfin_write32(SIC_IMASK2, val)
+#define bfin_read_SIC_IMASK(x)		bfin_read32(SIC_IMASK0 + (x << 2))
+#define bfin_write_SIC_IMASK(x, val)	bfin_write32((SIC_IMASK0 + (x << 2)), val)
+
+#define bfin_read_SIC_ISR0()		bfin_read32(SIC_ISR0)
+#define bfin_write_SIC_ISR0(val)	bfin_write32(SIC_ISR0, val)
+#define bfin_read_SIC_ISR1()		bfin_read32(SIC_ISR1)
+#define bfin_write_SIC_ISR1(val)	bfin_write32(SIC_ISR1, val)
+#define bfin_read_SIC_ISR2()		bfin_read32(SIC_ISR2)
+#define bfin_write_SIC_ISR2(val)	bfin_write32(SIC_ISR2, val)
+#define bfin_read_SIC_ISR(x)		bfin_read32(SIC_ISR0 + (x << 2))
+#define bfin_write_SIC_ISR(x, val)	bfin_write32((SIC_ISR0 + (x << 2)), val)
+
+#define bfin_read_SIC_IWR0()		bfin_read32(SIC_IWR0)
+#define bfin_write_SIC_IWR0(val)	bfin_write32(SIC_IWR0, val)
+#define bfin_read_SIC_IWR1()		bfin_read32(SIC_IWR1)
+#define bfin_write_SIC_IWR1(val)	bfin_write32(SIC_IWR1, val)
+#define bfin_read_SIC_IWR2()		bfin_read32(SIC_IWR2)
+#define bfin_write_SIC_IWR2(val)	bfin_write32(SIC_IWR2, val)
+#define bfin_read_SIC_IAR0()		bfin_read32(SIC_IAR0)
+#define bfin_write_SIC_IAR0(val)	bfin_write32(SIC_IAR0, val)
+#define bfin_read_SIC_IAR1()		bfin_read32(SIC_IAR1)
+#define bfin_write_SIC_IAR1(val)	bfin_write32(SIC_IAR1, val)
+#define bfin_read_SIC_IAR2()		bfin_read32(SIC_IAR2)
+#define bfin_write_SIC_IAR2(val)	bfin_write32(SIC_IAR2, val)
+#define bfin_read_SIC_IAR3()		bfin_read32(SIC_IAR3)
+#define bfin_write_SIC_IAR3(val)	bfin_write32(SIC_IAR3, val)
+#define bfin_read_SIC_IAR4()		bfin_read32(SIC_IAR4)
+#define bfin_write_SIC_IAR4(val)	bfin_write32(SIC_IAR4, val)
+#define bfin_read_SIC_IAR5()		bfin_read32(SIC_IAR5)
+#define bfin_write_SIC_IAR5(val)	bfin_write32(SIC_IAR5, val)
+#define bfin_read_SIC_IAR6()		bfin_read32(SIC_IAR6)
+#define bfin_write_SIC_IAR6(val)	bfin_write32(SIC_IAR6, val)
+#define bfin_read_SIC_IAR7()		bfin_read32(SIC_IAR7)
+#define bfin_write_SIC_IAR7(val)	bfin_write32(SIC_IAR7, val)
+#define bfin_read_SIC_IAR8()		bfin_read32(SIC_IAR8)
+#define bfin_write_SIC_IAR8(val)	bfin_write32(SIC_IAR8, val)
+#define bfin_read_SIC_IAR9()		bfin_read32(SIC_IAR9)
+#define bfin_write_SIC_IAR9(val)	bfin_write32(SIC_IAR9, val)
+#define bfin_read_SIC_IAR10()		bfin_read32(SIC_IAR10)
+#define bfin_write_SIC_IAR10(val)	bfin_write32(SIC_IAR10, val)
+#define bfin_read_SIC_IAR11()		bfin_read32(SIC_IAR11)
+#define bfin_write_SIC_IAR11(val)	bfin_write32(SIC_IAR11, val)
+
+/* Watchdog Timer Registers */
+
+#define bfin_read_WDOG_CTL()		bfin_read16(WDOG_CTL)
+#define bfin_write_WDOG_CTL(val)	bfin_write16(WDOG_CTL, val)
+#define bfin_read_WDOG_CNT()		bfin_read32(WDOG_CNT)
+#define bfin_write_WDOG_CNT(val)	bfin_write32(WDOG_CNT, val)
+#define bfin_read_WDOG_STAT()		bfin_read32(WDOG_STAT)
+#define bfin_write_WDOG_STAT(val)	bfin_write32(WDOG_STAT, val)
+
+/* RTC Registers */
+
+#define bfin_read_RTC_STAT()		bfin_read32(RTC_STAT)
+#define bfin_write_RTC_STAT(val)	bfin_write32(RTC_STAT, val)
+#define bfin_read_RTC_ICTL()		bfin_read16(RTC_ICTL)
+#define bfin_write_RTC_ICTL(val)	bfin_write16(RTC_ICTL, val)
+#define bfin_read_RTC_ISTAT()		bfin_read16(RTC_ISTAT)
+#define bfin_write_RTC_ISTAT(val)	bfin_write16(RTC_ISTAT, val)
+#define bfin_read_RTC_SWCNT()		bfin_read16(RTC_SWCNT)
+#define bfin_write_RTC_SWCNT(val)	bfin_write16(RTC_SWCNT, val)
+#define bfin_read_RTC_ALARM()		bfin_read32(RTC_ALARM)
+#define bfin_write_RTC_ALARM(val)	bfin_write32(RTC_ALARM, val)
+#define bfin_read_RTC_PREN()		bfin_read16(RTC_PREN)
+#define bfin_write_RTC_PREN(val)	bfin_write16(RTC_PREN, val)
+
+/* UART0 Registers */
+
+#define bfin_read_UART0_DLL()		bfin_read16(UART0_DLL)
+#define bfin_write_UART0_DLL(val)	bfin_write16(UART0_DLL, val)
+#define bfin_read_UART0_DLH()		bfin_read16(UART0_DLH)
+#define bfin_write_UART0_DLH(val)	bfin_write16(UART0_DLH, val)
+#define bfin_read_UART0_GCTL()		bfin_read16(UART0_GCTL)
+#define bfin_write_UART0_GCTL(val)	bfin_write16(UART0_GCTL, val)
+#define bfin_read_UART0_LCR()		bfin_read16(UART0_LCR)
+#define bfin_write_UART0_LCR(val)	bfin_write16(UART0_LCR, val)
+#define bfin_read_UART0_MCR()		bfin_read16(UART0_MCR)
+#define bfin_write_UART0_MCR(val)	bfin_write16(UART0_MCR, val)
+#define bfin_read_UART0_LSR()		bfin_read16(UART0_LSR)
+#define bfin_write_UART0_LSR(val)	bfin_write16(UART0_LSR, val)
+#define bfin_read_UART0_MSR()		bfin_read16(UART0_MSR)
+#define bfin_write_UART0_MSR(val)	bfin_write16(UART0_MSR, val)
+#define bfin_read_UART0_SCR()		bfin_read16(UART0_SCR)
+#define bfin_write_UART0_SCR(val)	bfin_write16(UART0_SCR, val)
+#define bfin_read_UART0_IER_SET()	bfin_read16(UART0_IER_SET)
+#define bfin_write_UART0_IER_SET(val)	bfin_write16(UART0_IER_SET, val)
+#define bfin_read_UART0_IER_CLEAR()	bfin_read16(UART0_IER_CLEAR)
+#define bfin_write_UART0_IER_CLEAR(val)	bfin_write16(UART0_IER_CLEAR, val)
+#define bfin_read_UART0_THR()		bfin_read16(UART0_THR)
+#define bfin_write_UART0_THR(val)	bfin_write16(UART0_THR, val)
+#define bfin_read_UART0_RBR()		bfin_read16(UART0_RBR)
+#define bfin_write_UART0_RBR(val)	bfin_write16(UART0_RBR, val)
+
+/* SPI0 Registers */
+
+#define bfin_read_SPI0_CTL()		bfin_read16(SPI0_CTL)
+#define bfin_write_SPI0_CTL(val)	bfin_write16(SPI0_CTL, val)
+#define bfin_read_SPI0_FLG()		bfin_read16(SPI0_FLG)
+#define bfin_write_SPI0_FLG(val)	bfin_write16(SPI0_FLG, val)
+#define bfin_read_SPI0_STAT()		bfin_read16(SPI0_STAT)
+#define bfin_write_SPI0_STAT(val)	bfin_write16(SPI0_STAT, val)
+#define bfin_read_SPI0_TDBR()		bfin_read16(SPI0_TDBR)
+#define bfin_write_SPI0_TDBR(val)	bfin_write16(SPI0_TDBR, val)
+#define bfin_read_SPI0_RDBR()		bfin_read16(SPI0_RDBR)
+#define bfin_write_SPI0_RDBR(val)	bfin_write16(SPI0_RDBR, val)
+#define bfin_read_SPI0_BAUD()		bfin_read16(SPI0_BAUD)
+#define bfin_write_SPI0_BAUD(val)	bfin_write16(SPI0_BAUD, val)
+#define bfin_read_SPI0_SHADOW()		bfin_read16(SPI0_SHADOW)
+#define bfin_write_SPI0_SHADOW(val)	bfin_write16(SPI0_SHADOW, val)
+
+/* Timer Groubfin_read_() of 3 registers are not defined in the shared file because they are not available on the ADSP-BF542 processor */
+
+/* Two Wire Interface Registers (TWI0) */
+
+/* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */
+
+/* SPORT1 Registers */
+
+#define bfin_read_SPORT1_TCR1()		bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val)	bfin_write16(SPORT1_TCR1, val)
+#define bfin_read_SPORT1_TCR2()		bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val)	bfin_write16(SPORT1_TCR2, val)
+#define bfin_read_SPORT1_TCLKDIV()	bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val)	bfin_write16(SPORT1_TCLKDIV, val)
+#define bfin_read_SPORT1_TFSDIV()	bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val)	bfin_write16(SPORT1_TFSDIV, val)
+#define bfin_read_SPORT1_TX()		bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val)	bfin_write32(SPORT1_TX, val)
+#define bfin_read_SPORT1_RX()		bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val)	bfin_write32(SPORT1_RX, val)
+#define bfin_read_SPORT1_RCR1()		bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val)	bfin_write16(SPORT1_RCR1, val)
+#define bfin_read_SPORT1_RCR2()		bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val)	bfin_write16(SPORT1_RCR2, val)
+#define bfin_read_SPORT1_RCLKDIV()	bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val)	bfin_write16(SPORT1_RCLKDIV, val)
+#define bfin_read_SPORT1_RFSDIV()	bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val)	bfin_write16(SPORT1_RFSDIV, val)
+#define bfin_read_SPORT1_STAT()		bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val)	bfin_write16(SPORT1_STAT, val)
+#define bfin_read_SPORT1_CHNL()		bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val)	bfin_write16(SPORT1_CHNL, val)
+#define bfin_read_SPORT1_MCMC1()	bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val)	bfin_write16(SPORT1_MCMC1, val)
+#define bfin_read_SPORT1_MCMC2()	bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val)	bfin_write16(SPORT1_MCMC2, val)
+#define bfin_read_SPORT1_MTCS0()	bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val)	bfin_write32(SPORT1_MTCS0, val)
+#define bfin_read_SPORT1_MTCS1()	bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val)	bfin_write32(SPORT1_MTCS1, val)
+#define bfin_read_SPORT1_MTCS2()	bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val)	bfin_write32(SPORT1_MTCS2, val)
+#define bfin_read_SPORT1_MTCS3()	bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val)	bfin_write32(SPORT1_MTCS3, val)
+#define bfin_read_SPORT1_MRCS0()	bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val)	bfin_write32(SPORT1_MRCS0, val)
+#define bfin_read_SPORT1_MRCS1()	bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val)	bfin_write32(SPORT1_MRCS1, val)
+#define bfin_read_SPORT1_MRCS2()	bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val)	bfin_write32(SPORT1_MRCS2, val)
+#define bfin_read_SPORT1_MRCS3()	bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val)	bfin_write32(SPORT1_MRCS3, val)
+
+/* Asynchronous Memory Control Registers */
+
+#define bfin_read_EBIU_AMGCTL()		bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val)	bfin_write16(EBIU_AMGCTL, val)
+#define bfin_read_EBIU_AMBCTL0()	bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val)	bfin_write32(EBIU_AMBCTL0, val)
+#define bfin_read_EBIU_AMBCTL1()	bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val)	bfin_write32(EBIU_AMBCTL1, val)
+#define bfin_read_EBIU_MBSCTL()		bfin_read16(EBIU_MBSCTL)
+#define bfin_write_EBIU_MBSCTL(val)	bfin_write16(EBIU_MBSCTL, val)
+#define bfin_read_EBIU_ARBSTAT()	bfin_read32(EBIU_ARBSTAT)
+#define bfin_write_EBIU_ARBSTAT(val)	bfin_write32(EBIU_ARBSTAT, val)
+#define bfin_read_EBIU_MODE()		bfin_read32(EBIU_MODE)
+#define bfin_write_EBIU_MODE(val)	bfin_write32(EBIU_MODE, val)
+#define bfin_read_EBIU_FCTL()		bfin_read16(EBIU_FCTL)
+#define bfin_write_EBIU_FCTL(val)	bfin_write16(EBIU_FCTL, val)
+
+/* DDR Memory Control Registers */
+
+#define bfin_read_EBIU_DDRCTL0()	bfin_read32(EBIU_DDRCTL0)
+#define bfin_write_EBIU_DDRCTL0(val)	bfin_write32(EBIU_DDRCTL0, val)
+#define bfin_read_EBIU_DDRCTL1()	bfin_read32(EBIU_DDRCTL1)
+#define bfin_write_EBIU_DDRCTL1(val)	bfin_write32(EBIU_DDRCTL1, val)
+#define bfin_read_EBIU_DDRCTL2()	bfin_read32(EBIU_DDRCTL2)
+#define bfin_write_EBIU_DDRCTL2(val)	bfin_write32(EBIU_DDRCTL2, val)
+#define bfin_read_EBIU_DDRCTL3()	bfin_read32(EBIU_DDRCTL3)
+#define bfin_write_EBIU_DDRCTL3(val)	bfin_write32(EBIU_DDRCTL3, val)
+#define bfin_read_EBIU_DDRQUE()		bfin_read32(EBIU_DDRQUE)
+#define bfin_write_EBIU_DDRQUE(val)	bfin_write32(EBIU_DDRQUE, val)
+#define bfin_read_EBIU_ERRADD() 	bfin_read32(EBIU_ERRADD)
+#define bfin_write_EBIU_ERRADD(val) 	bfin_write32(EBIU_ERRADD, val)
+#define bfin_read_EBIU_ERRMST()		bfin_read16(EBIU_ERRMST)
+#define bfin_write_EBIU_ERRMST(val)	bfin_write16(EBIU_ERRMST, val)
+#define bfin_read_EBIU_RSTCTL()		bfin_read16(EBIU_RSTCTL)
+#define bfin_write_EBIU_RSTCTL(val)	bfin_write16(EBIU_RSTCTL, val)
+
+/* DDR BankRead and Write Count Registers */
+
+#define bfin_read_EBIU_DDRBRC0()	bfin_read32(EBIU_DDRBRC0)
+#define bfin_write_EBIU_DDRBRC0(val)	bfin_write32(EBIU_DDRBRC0, val)
+#define bfin_read_EBIU_DDRBRC1()	bfin_read32(EBIU_DDRBRC1)
+#define bfin_write_EBIU_DDRBRC1(val)	bfin_write32(EBIU_DDRBRC1, val)
+#define bfin_read_EBIU_DDRBRC2()	bfin_read32(EBIU_DDRBRC2)
+#define bfin_write_EBIU_DDRBRC2(val)	bfin_write32(EBIU_DDRBRC2, val)
+#define bfin_read_EBIU_DDRBRC3()	bfin_read32(EBIU_DDRBRC3)
+#define bfin_write_EBIU_DDRBRC3(val)	bfin_write32(EBIU_DDRBRC3, val)
+#define bfin_read_EBIU_DDRBRC4()	bfin_read32(EBIU_DDRBRC4)
+#define bfin_write_EBIU_DDRBRC4(val)	bfin_write32(EBIU_DDRBRC4, val)
+#define bfin_read_EBIU_DDRBRC5()	bfin_read32(EBIU_DDRBRC5)
+#define bfin_write_EBIU_DDRBRC5(val)	bfin_write32(EBIU_DDRBRC5, val)
+#define bfin_read_EBIU_DDRBRC6()	bfin_read32(EBIU_DDRBRC6)
+#define bfin_write_EBIU_DDRBRC6(val)	bfin_write32(EBIU_DDRBRC6, val)
+#define bfin_read_EBIU_DDRBRC7()	bfin_read32(EBIU_DDRBRC7)
+#define bfin_write_EBIU_DDRBRC7(val)	bfin_write32(EBIU_DDRBRC7, val)
+#define bfin_read_EBIU_DDRBWC0()	bfin_read32(EBIU_DDRBWC0)
+#define bfin_write_EBIU_DDRBWC0(val)	bfin_write32(EBIU_DDRBWC0, val)
+#define bfin_read_EBIU_DDRBWC1()	bfin_read32(EBIU_DDRBWC1)
+#define bfin_write_EBIU_DDRBWC1(val)	bfin_write32(EBIU_DDRBWC1, val)
+#define bfin_read_EBIU_DDRBWC2()	bfin_read32(EBIU_DDRBWC2)
+#define bfin_write_EBIU_DDRBWC2(val)	bfin_write32(EBIU_DDRBWC2, val)
+#define bfin_read_EBIU_DDRBWC3()	bfin_read32(EBIU_DDRBWC3)
+#define bfin_write_EBIU_DDRBWC3(val)	bfin_write32(EBIU_DDRBWC3, val)
+#define bfin_read_EBIU_DDRBWC4()	bfin_read32(EBIU_DDRBWC4)
+#define bfin_write_EBIU_DDRBWC4(val)	bfin_write32(EBIU_DDRBWC4, val)
+#define bfin_read_EBIU_DDRBWC5()	bfin_read32(EBIU_DDRBWC5)
+#define bfin_write_EBIU_DDRBWC5(val)	bfin_write32(EBIU_DDRBWC5, val)
+#define bfin_read_EBIU_DDRBWC6()	bfin_read32(EBIU_DDRBWC6)
+#define bfin_write_EBIU_DDRBWC6(val)	bfin_write32(EBIU_DDRBWC6, val)
+#define bfin_read_EBIU_DDRBWC7()	bfin_read32(EBIU_DDRBWC7)
+#define bfin_write_EBIU_DDRBWC7(val)	bfin_write32(EBIU_DDRBWC7, val)
+#define bfin_read_EBIU_DDRACCT()	bfin_read32(EBIU_DDRACCT)
+#define bfin_write_EBIU_DDRACCT(val)	bfin_write32(EBIU_DDRACCT, val)
+#define bfin_read_EBIU_DDRTACT()	bfin_read32(EBIU_DDRTACT)
+#define bfin_write_EBIU_DDRTACT(val)	bfin_write32(EBIU_DDRTACT, val)
+#define bfin_read_EBIU_DDRARCT()	bfin_read32(EBIU_DDRARCT)
+#define bfin_write_EBIU_DDRARCT(val)	bfin_write32(EBIU_DDRARCT, val)
+#define bfin_read_EBIU_DDRGC0()		bfin_read32(EBIU_DDRGC0)
+#define bfin_write_EBIU_DDRGC0(val)	bfin_write32(EBIU_DDRGC0, val)
+#define bfin_read_EBIU_DDRGC1()		bfin_read32(EBIU_DDRGC1)
+#define bfin_write_EBIU_DDRGC1(val)	bfin_write32(EBIU_DDRGC1, val)
+#define bfin_read_EBIU_DDRGC2()		bfin_read32(EBIU_DDRGC2)
+#define bfin_write_EBIU_DDRGC2(val)	bfin_write32(EBIU_DDRGC2, val)
+#define bfin_read_EBIU_DDRGC3()		bfin_read32(EBIU_DDRGC3)
+#define bfin_write_EBIU_DDRGC3(val)	bfin_write32(EBIU_DDRGC3, val)
+#define bfin_read_EBIU_DDRMCEN()	bfin_read32(EBIU_DDRMCEN)
+#define bfin_write_EBIU_DDRMCEN(val)	bfin_write32(EBIU_DDRMCEN, val)
+#define bfin_read_EBIU_DDRMCCL()	bfin_read32(EBIU_DDRMCCL)
+#define bfin_write_EBIU_DDRMCCL(val)	bfin_write32(EBIU_DDRMCCL, val)
+
+/* DMAC0 Registers */
+
+#define bfin_read_DMAC0_TC_PER()		bfin_read16(DMAC0_TC_PER)
+#define bfin_write_DMAC0_TC_PER(val)	bfin_write16(DMAC0_TC_PER, val)
+#define bfin_read_DMAC0_TC_CNT()		bfin_read16(DMAC0_TC_CNT)
+#define bfin_write_DMAC0_TC_CNT(val)	bfin_write16(DMAC0_TC_CNT, val)
+
+/* DMA Channel 0 Registers */
+
+#define bfin_read_DMA0_NEXT_DESC_PTR() 		bfin_read32(DMA0_NEXT_DESC_PTR)
+#define bfin_write_DMA0_NEXT_DESC_PTR(val) 	bfin_write32(DMA0_NEXT_DESC_PTR, val)
+#define bfin_read_DMA0_START_ADDR() 		bfin_read32(DMA0_START_ADDR)
+#define bfin_write_DMA0_START_ADDR(val) 	bfin_write32(DMA0_START_ADDR, val)
+#define bfin_read_DMA0_CONFIG()			bfin_read16(DMA0_CONFIG)
+#define bfin_write_DMA0_CONFIG(val)		bfin_write16(DMA0_CONFIG, val)
+#define bfin_read_DMA0_X_COUNT()		bfin_read16(DMA0_X_COUNT)
+#define bfin_write_DMA0_X_COUNT(val)		bfin_write16(DMA0_X_COUNT, val)
+#define bfin_read_DMA0_X_MODIFY()		bfin_read16(DMA0_X_MODIFY)
+#define bfin_write_DMA0_X_MODIFY(val) 		bfin_write16(DMA0_X_MODIFY, val)
+#define bfin_read_DMA0_Y_COUNT()		bfin_read16(DMA0_Y_COUNT)
+#define bfin_write_DMA0_Y_COUNT(val)		bfin_write16(DMA0_Y_COUNT, val)
+#define bfin_read_DMA0_Y_MODIFY()		bfin_read16(DMA0_Y_MODIFY)
+#define bfin_write_DMA0_Y_MODIFY(val) 		bfin_write16(DMA0_Y_MODIFY, val)
+#define bfin_read_DMA0_CURR_DESC_PTR() 		bfin_read32(DMA0_CURR_DESC_PTR)
+#define bfin_write_DMA0_CURR_DESC_PTR(val) 	bfin_write32(DMA0_CURR_DESC_PTR, val)
+#define bfin_read_DMA0_CURR_ADDR() 		bfin_read32(DMA0_CURR_ADDR)
+#define bfin_write_DMA0_CURR_ADDR(val) 		bfin_write32(DMA0_CURR_ADDR, val)
+#define bfin_read_DMA0_IRQ_STATUS()		bfin_read16(DMA0_IRQ_STATUS)
+#define bfin_write_DMA0_IRQ_STATUS(val)		bfin_write16(DMA0_IRQ_STATUS, val)
+#define bfin_read_DMA0_PERIPHERAL_MAP()		bfin_read16(DMA0_PERIPHERAL_MAP)
+#define bfin_write_DMA0_PERIPHERAL_MAP(val)	bfin_write16(DMA0_PERIPHERAL_MAP, val)
+#define bfin_read_DMA0_CURR_X_COUNT()		bfin_read16(DMA0_CURR_X_COUNT)
+#define bfin_write_DMA0_CURR_X_COUNT(val)	bfin_write16(DMA0_CURR_X_COUNT, val)
+#define bfin_read_DMA0_CURR_Y_COUNT()		bfin_read16(DMA0_CURR_Y_COUNT)
+#define bfin_write_DMA0_CURR_Y_COUNT(val)	bfin_write16(DMA0_CURR_Y_COUNT, val)
+
+/* DMA Channel 1 Registers */
+
+#define bfin_read_DMA1_NEXT_DESC_PTR() 		bfin_read32(DMA1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_NEXT_DESC_PTR(val) 	bfin_write32(DMA1_NEXT_DESC_PTR, val)
+#define bfin_read_DMA1_START_ADDR() 		bfin_read32(DMA1_START_ADDR)
+#define bfin_write_DMA1_START_ADDR(val) 	bfin_write32(DMA1_START_ADDR, val)
+#define bfin_read_DMA1_CONFIG()			bfin_read16(DMA1_CONFIG)
+#define bfin_write_DMA1_CONFIG(val)		bfin_write16(DMA1_CONFIG, val)
+#define bfin_read_DMA1_X_COUNT()		bfin_read16(DMA1_X_COUNT)
+#define bfin_write_DMA1_X_COUNT(val)		bfin_write16(DMA1_X_COUNT, val)
+#define bfin_read_DMA1_X_MODIFY()		bfin_read16(DMA1_X_MODIFY)
+#define bfin_write_DMA1_X_MODIFY(val) 		bfin_write16(DMA1_X_MODIFY, val)
+#define bfin_read_DMA1_Y_COUNT()		bfin_read16(DMA1_Y_COUNT)
+#define bfin_write_DMA1_Y_COUNT(val)		bfin_write16(DMA1_Y_COUNT, val)
+#define bfin_read_DMA1_Y_MODIFY()		bfin_read16(DMA1_Y_MODIFY)
+#define bfin_write_DMA1_Y_MODIFY(val) 		bfin_write16(DMA1_Y_MODIFY, val)
+#define bfin_read_DMA1_CURR_DESC_PTR() 		bfin_read32(DMA1_CURR_DESC_PTR)
+#define bfin_write_DMA1_CURR_DESC_PTR(val) 	bfin_write32(DMA1_CURR_DESC_PTR, val)
+#define bfin_read_DMA1_CURR_ADDR() 		bfin_read32(DMA1_CURR_ADDR)
+#define bfin_write_DMA1_CURR_ADDR(val) 		bfin_write32(DMA1_CURR_ADDR, val)
+#define bfin_read_DMA1_IRQ_STATUS()		bfin_read16(DMA1_IRQ_STATUS)
+#define bfin_write_DMA1_IRQ_STATUS(val)		bfin_write16(DMA1_IRQ_STATUS, val)
+#define bfin_read_DMA1_PERIPHERAL_MAP()		bfin_read16(DMA1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_PERIPHERAL_MAP(val)	bfin_write16(DMA1_PERIPHERAL_MAP, val)
+#define bfin_read_DMA1_CURR_X_COUNT()		bfin_read16(DMA1_CURR_X_COUNT)
+#define bfin_write_DMA1_CURR_X_COUNT(val)	bfin_write16(DMA1_CURR_X_COUNT, val)
+#define bfin_read_DMA1_CURR_Y_COUNT()		bfin_read16(DMA1_CURR_Y_COUNT)
+#define bfin_write_DMA1_CURR_Y_COUNT(val)	bfin_write16(DMA1_CURR_Y_COUNT, val)
+
+/* DMA Channel 2 Registers */
+
+#define bfin_read_DMA2_NEXT_DESC_PTR() 		bfin_read32(DMA2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_NEXT_DESC_PTR(val) 	bfin_write32(DMA2_NEXT_DESC_PTR, val)
+#define bfin_read_DMA2_START_ADDR() 		bfin_read32(DMA2_START_ADDR)
+#define bfin_write_DMA2_START_ADDR(val) 	bfin_write32(DMA2_START_ADDR, val)
+#define bfin_read_DMA2_CONFIG()			bfin_read16(DMA2_CONFIG)
+#define bfin_write_DMA2_CONFIG(val)		bfin_write16(DMA2_CONFIG, val)
+#define bfin_read_DMA2_X_COUNT()		bfin_read16(DMA2_X_COUNT)
+#define bfin_write_DMA2_X_COUNT(val)		bfin_write16(DMA2_X_COUNT, val)
+#define bfin_read_DMA2_X_MODIFY()		bfin_read16(DMA2_X_MODIFY)
+#define bfin_write_DMA2_X_MODIFY(val) 		bfin_write16(DMA2_X_MODIFY, val)
+#define bfin_read_DMA2_Y_COUNT()		bfin_read16(DMA2_Y_COUNT)
+#define bfin_write_DMA2_Y_COUNT(val)		bfin_write16(DMA2_Y_COUNT, val)
+#define bfin_read_DMA2_Y_MODIFY()		bfin_read16(DMA2_Y_MODIFY)
+#define bfin_write_DMA2_Y_MODIFY(val) 		bfin_write16(DMA2_Y_MODIFY, val)
+#define bfin_read_DMA2_CURR_DESC_PTR() 		bfin_read32(DMA2_CURR_DESC_PTR)
+#define bfin_write_DMA2_CURR_DESC_PTR(val) 	bfin_write32(DMA2_CURR_DESC_PTR, val)
+#define bfin_read_DMA2_CURR_ADDR() 		bfin_read32(DMA2_CURR_ADDR)
+#define bfin_write_DMA2_CURR_ADDR(val) 		bfin_write32(DMA2_CURR_ADDR, val)
+#define bfin_read_DMA2_IRQ_STATUS()		bfin_read16(DMA2_IRQ_STATUS)
+#define bfin_write_DMA2_IRQ_STATUS(val)		bfin_write16(DMA2_IRQ_STATUS, val)
+#define bfin_read_DMA2_PERIPHERAL_MAP()		bfin_read16(DMA2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_PERIPHERAL_MAP(val)	bfin_write16(DMA2_PERIPHERAL_MAP, val)
+#define bfin_read_DMA2_CURR_X_COUNT()		bfin_read16(DMA2_CURR_X_COUNT)
+#define bfin_write_DMA2_CURR_X_COUNT(val)	bfin_write16(DMA2_CURR_X_COUNT, val)
+#define bfin_read_DMA2_CURR_Y_COUNT()		bfin_read16(DMA2_CURR_Y_COUNT)
+#define bfin_write_DMA2_CURR_Y_COUNT(val)	bfin_write16(DMA2_CURR_Y_COUNT, val)
+
+/* DMA Channel 3 Registers */
+
+#define bfin_read_DMA3_NEXT_DESC_PTR() 		bfin_read32(DMA3_NEXT_DESC_PTR)
+#define bfin_write_DMA3_NEXT_DESC_PTR(val) 	bfin_write32(DMA3_NEXT_DESC_PTR, val)
+#define bfin_read_DMA3_START_ADDR() 		bfin_read32(DMA3_START_ADDR)
+#define bfin_write_DMA3_START_ADDR(val) 	bfin_write32(DMA3_START_ADDR, val)
+#define bfin_read_DMA3_CONFIG()			bfin_read16(DMA3_CONFIG)
+#define bfin_write_DMA3_CONFIG(val)		bfin_write16(DMA3_CONFIG, val)
+#define bfin_read_DMA3_X_COUNT()		bfin_read16(DMA3_X_COUNT)
+#define bfin_write_DMA3_X_COUNT(val)		bfin_write16(DMA3_X_COUNT, val)
+#define bfin_read_DMA3_X_MODIFY()		bfin_read16(DMA3_X_MODIFY)
+#define bfin_write_DMA3_X_MODIFY(val) 		bfin_write16(DMA3_X_MODIFY, val)
+#define bfin_read_DMA3_Y_COUNT()		bfin_read16(DMA3_Y_COUNT)
+#define bfin_write_DMA3_Y_COUNT(val)		bfin_write16(DMA3_Y_COUNT, val)
+#define bfin_read_DMA3_Y_MODIFY()		bfin_read16(DMA3_Y_MODIFY)
+#define bfin_write_DMA3_Y_MODIFY(val) 		bfin_write16(DMA3_Y_MODIFY, val)
+#define bfin_read_DMA3_CURR_DESC_PTR() 		bfin_read32(DMA3_CURR_DESC_PTR)
+#define bfin_write_DMA3_CURR_DESC_PTR(val) 	bfin_write32(DMA3_CURR_DESC_PTR, val)
+#define bfin_read_DMA3_CURR_ADDR() 		bfin_read32(DMA3_CURR_ADDR)
+#define bfin_write_DMA3_CURR_ADDR(val) 		bfin_write32(DMA3_CURR_ADDR, val)
+#define bfin_read_DMA3_IRQ_STATUS()		bfin_read16(DMA3_IRQ_STATUS)
+#define bfin_write_DMA3_IRQ_STATUS(val)		bfin_write16(DMA3_IRQ_STATUS, val)
+#define bfin_read_DMA3_PERIPHERAL_MAP()		bfin_read16(DMA3_PERIPHERAL_MAP)
+#define bfin_write_DMA3_PERIPHERAL_MAP(val)	bfin_write16(DMA3_PERIPHERAL_MAP, val)
+#define bfin_read_DMA3_CURR_X_COUNT()		bfin_read16(DMA3_CURR_X_COUNT)
+#define bfin_write_DMA3_CURR_X_COUNT(val)	bfin_write16(DMA3_CURR_X_COUNT, val)
+#define bfin_read_DMA3_CURR_Y_COUNT()		bfin_read16(DMA3_CURR_Y_COUNT)
+#define bfin_write_DMA3_CURR_Y_COUNT(val)	bfin_write16(DMA3_CURR_Y_COUNT, val)
+
+/* DMA Channel 4 Registers */
+
+#define bfin_read_DMA4_NEXT_DESC_PTR() 		bfin_read32(DMA4_NEXT_DESC_PTR)
+#define bfin_write_DMA4_NEXT_DESC_PTR(val) 	bfin_write32(DMA4_NEXT_DESC_PTR, val)
+#define bfin_read_DMA4_START_ADDR() 		bfin_read32(DMA4_START_ADDR)
+#define bfin_write_DMA4_START_ADDR(val) 	bfin_write32(DMA4_START_ADDR, val)
+#define bfin_read_DMA4_CONFIG()			bfin_read16(DMA4_CONFIG)
+#define bfin_write_DMA4_CONFIG(val)		bfin_write16(DMA4_CONFIG, val)
+#define bfin_read_DMA4_X_COUNT()		bfin_read16(DMA4_X_COUNT)
+#define bfin_write_DMA4_X_COUNT(val)		bfin_write16(DMA4_X_COUNT, val)
+#define bfin_read_DMA4_X_MODIFY()		bfin_read16(DMA4_X_MODIFY)
+#define bfin_write_DMA4_X_MODIFY(val) 		bfin_write16(DMA4_X_MODIFY, val)
+#define bfin_read_DMA4_Y_COUNT()		bfin_read16(DMA4_Y_COUNT)
+#define bfin_write_DMA4_Y_COUNT(val)		bfin_write16(DMA4_Y_COUNT, val)
+#define bfin_read_DMA4_Y_MODIFY()		bfin_read16(DMA4_Y_MODIFY)
+#define bfin_write_DMA4_Y_MODIFY(val) 		bfin_write16(DMA4_Y_MODIFY, val)
+#define bfin_read_DMA4_CURR_DESC_PTR() 		bfin_read32(DMA4_CURR_DESC_PTR)
+#define bfin_write_DMA4_CURR_DESC_PTR(val) 	bfin_write32(DMA4_CURR_DESC_PTR, val)
+#define bfin_read_DMA4_CURR_ADDR() 		bfin_read32(DMA4_CURR_ADDR)
+#define bfin_write_DMA4_CURR_ADDR(val) 		bfin_write32(DMA4_CURR_ADDR, val)
+#define bfin_read_DMA4_IRQ_STATUS()		bfin_read16(DMA4_IRQ_STATUS)
+#define bfin_write_DMA4_IRQ_STATUS(val)		bfin_write16(DMA4_IRQ_STATUS, val)
+#define bfin_read_DMA4_PERIPHERAL_MAP()		bfin_read16(DMA4_PERIPHERAL_MAP)
+#define bfin_write_DMA4_PERIPHERAL_MAP(val)	bfin_write16(DMA4_PERIPHERAL_MAP, val)
+#define bfin_read_DMA4_CURR_X_COUNT()		bfin_read16(DMA4_CURR_X_COUNT)
+#define bfin_write_DMA4_CURR_X_COUNT(val)	bfin_write16(DMA4_CURR_X_COUNT, val)
+#define bfin_read_DMA4_CURR_Y_COUNT()		bfin_read16(DMA4_CURR_Y_COUNT)
+#define bfin_write_DMA4_CURR_Y_COUNT(val)	bfin_write16(DMA4_CURR_Y_COUNT, val)
+
+/* DMA Channel 5 Registers */
+
+#define bfin_read_DMA5_NEXT_DESC_PTR() 		bfin_read32(DMA5_NEXT_DESC_PTR)
+#define bfin_write_DMA5_NEXT_DESC_PTR(val) 	bfin_write32(DMA5_NEXT_DESC_PTR, val)
+#define bfin_read_DMA5_START_ADDR() 		bfin_read32(DMA5_START_ADDR)
+#define bfin_write_DMA5_START_ADDR(val) 	bfin_write32(DMA5_START_ADDR, val)
+#define bfin_read_DMA5_CONFIG()			bfin_read16(DMA5_CONFIG)
+#define bfin_write_DMA5_CONFIG(val)		bfin_write16(DMA5_CONFIG, val)
+#define bfin_read_DMA5_X_COUNT()		bfin_read16(DMA5_X_COUNT)
+#define bfin_write_DMA5_X_COUNT(val)		bfin_write16(DMA5_X_COUNT, val)
+#define bfin_read_DMA5_X_MODIFY()		bfin_read16(DMA5_X_MODIFY)
+#define bfin_write_DMA5_X_MODIFY(val) 		bfin_write16(DMA5_X_MODIFY, val)
+#define bfin_read_DMA5_Y_COUNT()		bfin_read16(DMA5_Y_COUNT)
+#define bfin_write_DMA5_Y_COUNT(val)		bfin_write16(DMA5_Y_COUNT, val)
+#define bfin_read_DMA5_Y_MODIFY()		bfin_read16(DMA5_Y_MODIFY)
+#define bfin_write_DMA5_Y_MODIFY(val) 		bfin_write16(DMA5_Y_MODIFY, val)
+#define bfin_read_DMA5_CURR_DESC_PTR() 		bfin_read32(DMA5_CURR_DESC_PTR)
+#define bfin_write_DMA5_CURR_DESC_PTR(val) 	bfin_write32(DMA5_CURR_DESC_PTR, val)
+#define bfin_read_DMA5_CURR_ADDR() 		bfin_read32(DMA5_CURR_ADDR)
+#define bfin_write_DMA5_CURR_ADDR(val) 		bfin_write32(DMA5_CURR_ADDR, val)
+#define bfin_read_DMA5_IRQ_STATUS()		bfin_read16(DMA5_IRQ_STATUS)
+#define bfin_write_DMA5_IRQ_STATUS(val)		bfin_write16(DMA5_IRQ_STATUS, val)
+#define bfin_read_DMA5_PERIPHERAL_MAP()		bfin_read16(DMA5_PERIPHERAL_MAP)
+#define bfin_write_DMA5_PERIPHERAL_MAP(val)	bfin_write16(DMA5_PERIPHERAL_MAP, val)
+#define bfin_read_DMA5_CURR_X_COUNT()		bfin_read16(DMA5_CURR_X_COUNT)
+#define bfin_write_DMA5_CURR_X_COUNT(val)	bfin_write16(DMA5_CURR_X_COUNT, val)
+#define bfin_read_DMA5_CURR_Y_COUNT()		bfin_read16(DMA5_CURR_Y_COUNT)
+#define bfin_write_DMA5_CURR_Y_COUNT(val)	bfin_write16(DMA5_CURR_Y_COUNT, val)
+
+/* DMA Channel 6 Registers */
+
+#define bfin_read_DMA6_NEXT_DESC_PTR() 		bfin_read32(DMA6_NEXT_DESC_PTR)
+#define bfin_write_DMA6_NEXT_DESC_PTR(val) 	bfin_write32(DMA6_NEXT_DESC_PTR, val)
+#define bfin_read_DMA6_START_ADDR() 		bfin_read32(DMA6_START_ADDR)
+#define bfin_write_DMA6_START_ADDR(val) 	bfin_write32(DMA6_START_ADDR, val)
+#define bfin_read_DMA6_CONFIG()			bfin_read16(DMA6_CONFIG)
+#define bfin_write_DMA6_CONFIG(val)		bfin_write16(DMA6_CONFIG, val)
+#define bfin_read_DMA6_X_COUNT()		bfin_read16(DMA6_X_COUNT)
+#define bfin_write_DMA6_X_COUNT(val)		bfin_write16(DMA6_X_COUNT, val)
+#define bfin_read_DMA6_X_MODIFY()		bfin_read16(DMA6_X_MODIFY)
+#define bfin_write_DMA6_X_MODIFY(val) 		bfin_write16(DMA6_X_MODIFY, val)
+#define bfin_read_DMA6_Y_COUNT()		bfin_read16(DMA6_Y_COUNT)
+#define bfin_write_DMA6_Y_COUNT(val)		bfin_write16(DMA6_Y_COUNT, val)
+#define bfin_read_DMA6_Y_MODIFY()		bfin_read16(DMA6_Y_MODIFY)
+#define bfin_write_DMA6_Y_MODIFY(val) 		bfin_write16(DMA6_Y_MODIFY, val)
+#define bfin_read_DMA6_CURR_DESC_PTR() 		bfin_read32(DMA6_CURR_DESC_PTR)
+#define bfin_write_DMA6_CURR_DESC_PTR(val) 	bfin_write32(DMA6_CURR_DESC_PTR, val)
+#define bfin_read_DMA6_CURR_ADDR() 		bfin_read32(DMA6_CURR_ADDR)
+#define bfin_write_DMA6_CURR_ADDR(val) 		bfin_write32(DMA6_CURR_ADDR, val)
+#define bfin_read_DMA6_IRQ_STATUS()		bfin_read16(DMA6_IRQ_STATUS)
+#define bfin_write_DMA6_IRQ_STATUS(val)		bfin_write16(DMA6_IRQ_STATUS, val)
+#define bfin_read_DMA6_PERIPHERAL_MAP()		bfin_read16(DMA6_PERIPHERAL_MAP)
+#define bfin_write_DMA6_PERIPHERAL_MAP(val)	bfin_write16(DMA6_PERIPHERAL_MAP, val)
+#define bfin_read_DMA6_CURR_X_COUNT()		bfin_read16(DMA6_CURR_X_COUNT)
+#define bfin_write_DMA6_CURR_X_COUNT(val)	bfin_write16(DMA6_CURR_X_COUNT, val)
+#define bfin_read_DMA6_CURR_Y_COUNT()		bfin_read16(DMA6_CURR_Y_COUNT)
+#define bfin_write_DMA6_CURR_Y_COUNT(val)	bfin_write16(DMA6_CURR_Y_COUNT, val)
+
+/* DMA Channel 7 Registers */
+
+#define bfin_read_DMA7_NEXT_DESC_PTR() 		bfin_read32(DMA7_NEXT_DESC_PTR)
+#define bfin_write_DMA7_NEXT_DESC_PTR(val) 	bfin_write32(DMA7_NEXT_DESC_PTR, val)
+#define bfin_read_DMA7_START_ADDR() 		bfin_read32(DMA7_START_ADDR)
+#define bfin_write_DMA7_START_ADDR(val) 	bfin_write32(DMA7_START_ADDR, val)
+#define bfin_read_DMA7_CONFIG()			bfin_read16(DMA7_CONFIG)
+#define bfin_write_DMA7_CONFIG(val)		bfin_write16(DMA7_CONFIG, val)
+#define bfin_read_DMA7_X_COUNT()		bfin_read16(DMA7_X_COUNT)
+#define bfin_write_DMA7_X_COUNT(val)		bfin_write16(DMA7_X_COUNT, val)
+#define bfin_read_DMA7_X_MODIFY()		bfin_read16(DMA7_X_MODIFY)
+#define bfin_write_DMA7_X_MODIFY(val) 		bfin_write16(DMA7_X_MODIFY, val)
+#define bfin_read_DMA7_Y_COUNT()		bfin_read16(DMA7_Y_COUNT)
+#define bfin_write_DMA7_Y_COUNT(val)		bfin_write16(DMA7_Y_COUNT, val)
+#define bfin_read_DMA7_Y_MODIFY()		bfin_read16(DMA7_Y_MODIFY)
+#define bfin_write_DMA7_Y_MODIFY(val) 		bfin_write16(DMA7_Y_MODIFY, val)
+#define bfin_read_DMA7_CURR_DESC_PTR() 		bfin_read32(DMA7_CURR_DESC_PTR)
+#define bfin_write_DMA7_CURR_DESC_PTR(val) 	bfin_write32(DMA7_CURR_DESC_PTR, val)
+#define bfin_read_DMA7_CURR_ADDR() 		bfin_read32(DMA7_CURR_ADDR)
+#define bfin_write_DMA7_CURR_ADDR(val) 		bfin_write32(DMA7_CURR_ADDR, val)
+#define bfin_read_DMA7_IRQ_STATUS()		bfin_read16(DMA7_IRQ_STATUS)
+#define bfin_write_DMA7_IRQ_STATUS(val)		bfin_write16(DMA7_IRQ_STATUS, val)
+#define bfin_read_DMA7_PERIPHERAL_MAP()		bfin_read16(DMA7_PERIPHERAL_MAP)
+#define bfin_write_DMA7_PERIPHERAL_MAP(val)	bfin_write16(DMA7_PERIPHERAL_MAP, val)
+#define bfin_read_DMA7_CURR_X_COUNT()		bfin_read16(DMA7_CURR_X_COUNT)
+#define bfin_write_DMA7_CURR_X_COUNT(val)	bfin_write16(DMA7_CURR_X_COUNT, val)
+#define bfin_read_DMA7_CURR_Y_COUNT()		bfin_read16(DMA7_CURR_Y_COUNT)
+#define bfin_write_DMA7_CURR_Y_COUNT(val)	bfin_write16(DMA7_CURR_Y_COUNT, val)
+
+/* DMA Channel 8 Registers */
+
+#define bfin_read_DMA8_NEXT_DESC_PTR() 		bfin_read32(DMA8_NEXT_DESC_PTR)
+#define bfin_write_DMA8_NEXT_DESC_PTR(val) 	bfin_write32(DMA8_NEXT_DESC_PTR, val)
+#define bfin_read_DMA8_START_ADDR() 		bfin_read32(DMA8_START_ADDR)
+#define bfin_write_DMA8_START_ADDR(val) 	bfin_write32(DMA8_START_ADDR, val)
+#define bfin_read_DMA8_CONFIG()			bfin_read16(DMA8_CONFIG)
+#define bfin_write_DMA8_CONFIG(val)		bfin_write16(DMA8_CONFIG, val)
+#define bfin_read_DMA8_X_COUNT()		bfin_read16(DMA8_X_COUNT)
+#define bfin_write_DMA8_X_COUNT(val)		bfin_write16(DMA8_X_COUNT, val)
+#define bfin_read_DMA8_X_MODIFY()		bfin_read16(DMA8_X_MODIFY)
+#define bfin_write_DMA8_X_MODIFY(val) 		bfin_write16(DMA8_X_MODIFY, val)
+#define bfin_read_DMA8_Y_COUNT()		bfin_read16(DMA8_Y_COUNT)
+#define bfin_write_DMA8_Y_COUNT(val)		bfin_write16(DMA8_Y_COUNT, val)
+#define bfin_read_DMA8_Y_MODIFY()		bfin_read16(DMA8_Y_MODIFY)
+#define bfin_write_DMA8_Y_MODIFY(val) 		bfin_write16(DMA8_Y_MODIFY, val)
+#define bfin_read_DMA8_CURR_DESC_PTR() 		bfin_read32(DMA8_CURR_DESC_PTR)
+#define bfin_write_DMA8_CURR_DESC_PTR(val) 	bfin_write32(DMA8_CURR_DESC_PTR, val)
+#define bfin_read_DMA8_CURR_ADDR() 		bfin_read32(DMA8_CURR_ADDR)
+#define bfin_write_DMA8_CURR_ADDR(val) 		bfin_write32(DMA8_CURR_ADDR, val)
+#define bfin_read_DMA8_IRQ_STATUS()		bfin_read16(DMA8_IRQ_STATUS)
+#define bfin_write_DMA8_IRQ_STATUS(val)		bfin_write16(DMA8_IRQ_STATUS, val)
+#define bfin_read_DMA8_PERIPHERAL_MAP()		bfin_read16(DMA8_PERIPHERAL_MAP)
+#define bfin_write_DMA8_PERIPHERAL_MAP(val)	bfin_write16(DMA8_PERIPHERAL_MAP, val)
+#define bfin_read_DMA8_CURR_X_COUNT()		bfin_read16(DMA8_CURR_X_COUNT)
+#define bfin_write_DMA8_CURR_X_COUNT(val)	bfin_write16(DMA8_CURR_X_COUNT, val)
+#define bfin_read_DMA8_CURR_Y_COUNT()		bfin_read16(DMA8_CURR_Y_COUNT)
+#define bfin_write_DMA8_CURR_Y_COUNT(val)	bfin_write16(DMA8_CURR_Y_COUNT, val)
+
+/* DMA Channel 9 Registers */
+
+#define bfin_read_DMA9_NEXT_DESC_PTR() 		bfin_read32(DMA9_NEXT_DESC_PTR)
+#define bfin_write_DMA9_NEXT_DESC_PTR(val) 	bfin_write32(DMA9_NEXT_DESC_PTR, val)
+#define bfin_read_DMA9_START_ADDR() 		bfin_read32(DMA9_START_ADDR)
+#define bfin_write_DMA9_START_ADDR(val) 	bfin_write32(DMA9_START_ADDR, val)
+#define bfin_read_DMA9_CONFIG()			bfin_read16(DMA9_CONFIG)
+#define bfin_write_DMA9_CONFIG(val)		bfin_write16(DMA9_CONFIG, val)
+#define bfin_read_DMA9_X_COUNT()		bfin_read16(DMA9_X_COUNT)
+#define bfin_write_DMA9_X_COUNT(val)		bfin_write16(DMA9_X_COUNT, val)
+#define bfin_read_DMA9_X_MODIFY()		bfin_read16(DMA9_X_MODIFY)
+#define bfin_write_DMA9_X_MODIFY(val) 		bfin_write16(DMA9_X_MODIFY, val)
+#define bfin_read_DMA9_Y_COUNT()		bfin_read16(DMA9_Y_COUNT)
+#define bfin_write_DMA9_Y_COUNT(val)		bfin_write16(DMA9_Y_COUNT, val)
+#define bfin_read_DMA9_Y_MODIFY()		bfin_read16(DMA9_Y_MODIFY)
+#define bfin_write_DMA9_Y_MODIFY(val) 		bfin_write16(DMA9_Y_MODIFY, val)
+#define bfin_read_DMA9_CURR_DESC_PTR() 		bfin_read32(DMA9_CURR_DESC_PTR)
+#define bfin_write_DMA9_CURR_DESC_PTR(val) 	bfin_write32(DMA9_CURR_DESC_PTR, val)
+#define bfin_read_DMA9_CURR_ADDR() 		bfin_read32(DMA9_CURR_ADDR)
+#define bfin_write_DMA9_CURR_ADDR(val) 		bfin_write32(DMA9_CURR_ADDR, val)
+#define bfin_read_DMA9_IRQ_STATUS()		bfin_read16(DMA9_IRQ_STATUS)
+#define bfin_write_DMA9_IRQ_STATUS(val)		bfin_write16(DMA9_IRQ_STATUS, val)
+#define bfin_read_DMA9_PERIPHERAL_MAP()		bfin_read16(DMA9_PERIPHERAL_MAP)
+#define bfin_write_DMA9_PERIPHERAL_MAP(val)	bfin_write16(DMA9_PERIPHERAL_MAP, val)
+#define bfin_read_DMA9_CURR_X_COUNT()		bfin_read16(DMA9_CURR_X_COUNT)
+#define bfin_write_DMA9_CURR_X_COUNT(val)	bfin_write16(DMA9_CURR_X_COUNT, val)
+#define bfin_read_DMA9_CURR_Y_COUNT()		bfin_read16(DMA9_CURR_Y_COUNT)
+#define bfin_write_DMA9_CURR_Y_COUNT(val)	bfin_write16(DMA9_CURR_Y_COUNT, val)
+
+/* DMA Channel 10 Registers */
+
+#define bfin_read_DMA10_NEXT_DESC_PTR() 	bfin_read32(DMA10_NEXT_DESC_PTR)
+#define bfin_write_DMA10_NEXT_DESC_PTR(val) 	bfin_write32(DMA10_NEXT_DESC_PTR, val)
+#define bfin_read_DMA10_START_ADDR() 		bfin_read32(DMA10_START_ADDR)
+#define bfin_write_DMA10_START_ADDR(val) 	bfin_write32(DMA10_START_ADDR, val)
+#define bfin_read_DMA10_CONFIG()		bfin_read16(DMA10_CONFIG)
+#define bfin_write_DMA10_CONFIG(val)		bfin_write16(DMA10_CONFIG, val)
+#define bfin_read_DMA10_X_COUNT()		bfin_read16(DMA10_X_COUNT)
+#define bfin_write_DMA10_X_COUNT(val)		bfin_write16(DMA10_X_COUNT, val)
+#define bfin_read_DMA10_X_MODIFY()		bfin_read16(DMA10_X_MODIFY)
+#define bfin_write_DMA10_X_MODIFY(val) 		bfin_write16(DMA10_X_MODIFY, val)
+#define bfin_read_DMA10_Y_COUNT()		bfin_read16(DMA10_Y_COUNT)
+#define bfin_write_DMA10_Y_COUNT(val)		bfin_write16(DMA10_Y_COUNT, val)
+#define bfin_read_DMA10_Y_MODIFY()		bfin_read16(DMA10_Y_MODIFY)
+#define bfin_write_DMA10_Y_MODIFY(val) 		bfin_write16(DMA10_Y_MODIFY, val)
+#define bfin_read_DMA10_CURR_DESC_PTR() 	bfin_read32(DMA10_CURR_DESC_PTR)
+#define bfin_write_DMA10_CURR_DESC_PTR(val) 	bfin_write32(DMA10_CURR_DESC_PTR, val)
+#define bfin_read_DMA10_CURR_ADDR() 		bfin_read32(DMA10_CURR_ADDR)
+#define bfin_write_DMA10_CURR_ADDR(val) 	bfin_write32(DMA10_CURR_ADDR, val)
+#define bfin_read_DMA10_IRQ_STATUS()		bfin_read16(DMA10_IRQ_STATUS)
+#define bfin_write_DMA10_IRQ_STATUS(val)	bfin_write16(DMA10_IRQ_STATUS, val)
+#define bfin_read_DMA10_PERIPHERAL_MAP()	bfin_read16(DMA10_PERIPHERAL_MAP)
+#define bfin_write_DMA10_PERIPHERAL_MAP(val)	bfin_write16(DMA10_PERIPHERAL_MAP, val)
+#define bfin_read_DMA10_CURR_X_COUNT()		bfin_read16(DMA10_CURR_X_COUNT)
+#define bfin_write_DMA10_CURR_X_COUNT(val)	bfin_write16(DMA10_CURR_X_COUNT, val)
+#define bfin_read_DMA10_CURR_Y_COUNT()		bfin_read16(DMA10_CURR_Y_COUNT)
+#define bfin_write_DMA10_CURR_Y_COUNT(val)	bfin_write16(DMA10_CURR_Y_COUNT, val)
+
+/* DMA Channel 11 Registers */
+
+#define bfin_read_DMA11_NEXT_DESC_PTR() 	bfin_read32(DMA11_NEXT_DESC_PTR)
+#define bfin_write_DMA11_NEXT_DESC_PTR(val) 	bfin_write32(DMA11_NEXT_DESC_PTR, val)
+#define bfin_read_DMA11_START_ADDR() 		bfin_read32(DMA11_START_ADDR)
+#define bfin_write_DMA11_START_ADDR(val) 	bfin_write32(DMA11_START_ADDR, val)
+#define bfin_read_DMA11_CONFIG()		bfin_read16(DMA11_CONFIG)
+#define bfin_write_DMA11_CONFIG(val)		bfin_write16(DMA11_CONFIG, val)
+#define bfin_read_DMA11_X_COUNT()		bfin_read16(DMA11_X_COUNT)
+#define bfin_write_DMA11_X_COUNT(val)		bfin_write16(DMA11_X_COUNT, val)
+#define bfin_read_DMA11_X_MODIFY()		bfin_read16(DMA11_X_MODIFY)
+#define bfin_write_DMA11_X_MODIFY(val) 		bfin_write16(DMA11_X_MODIFY, val)
+#define bfin_read_DMA11_Y_COUNT()		bfin_read16(DMA11_Y_COUNT)
+#define bfin_write_DMA11_Y_COUNT(val)		bfin_write16(DMA11_Y_COUNT, val)
+#define bfin_read_DMA11_Y_MODIFY()		bfin_read16(DMA11_Y_MODIFY)
+#define bfin_write_DMA11_Y_MODIFY(val) 		bfin_write16(DMA11_Y_MODIFY, val)
+#define bfin_read_DMA11_CURR_DESC_PTR() 	bfin_read32(DMA11_CURR_DESC_PTR)
+#define bfin_write_DMA11_CURR_DESC_PTR(val) 	bfin_write32(DMA11_CURR_DESC_PTR, val)
+#define bfin_read_DMA11_CURR_ADDR() 		bfin_read32(DMA11_CURR_ADDR)
+#define bfin_write_DMA11_CURR_ADDR(val) 	bfin_write32(DMA11_CURR_ADDR, val)
+#define bfin_read_DMA11_IRQ_STATUS()		bfin_read16(DMA11_IRQ_STATUS)
+#define bfin_write_DMA11_IRQ_STATUS(val)	bfin_write16(DMA11_IRQ_STATUS, val)
+#define bfin_read_DMA11_PERIPHERAL_MAP()	bfin_read16(DMA11_PERIPHERAL_MAP)
+#define bfin_write_DMA11_PERIPHERAL_MAP(val)	bfin_write16(DMA11_PERIPHERAL_MAP, val)
+#define bfin_read_DMA11_CURR_X_COUNT()		bfin_read16(DMA11_CURR_X_COUNT)
+#define bfin_write_DMA11_CURR_X_COUNT(val)	bfin_write16(DMA11_CURR_X_COUNT, val)
+#define bfin_read_DMA11_CURR_Y_COUNT()		bfin_read16(DMA11_CURR_Y_COUNT)
+#define bfin_write_DMA11_CURR_Y_COUNT(val)	bfin_write16(DMA11_CURR_Y_COUNT, val)
+
+/* MDMA Stream 0 Registers */
+
+#define bfin_read_MDMA_D0_NEXT_DESC_PTR() 	bfin_read32(MDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_D0_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D0_START_ADDR() 		bfin_read32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val) 	bfin_write32(MDMA_D0_START_ADDR, val)
+#define bfin_read_MDMA_D0_CONFIG()		bfin_read16(MDMA_D0_CONFIG)
+#define bfin_write_MDMA_D0_CONFIG(val)		bfin_write16(MDMA_D0_CONFIG, val)
+#define bfin_read_MDMA_D0_X_COUNT()		bfin_read16(MDMA_D0_X_COUNT)
+#define bfin_write_MDMA_D0_X_COUNT(val)		bfin_write16(MDMA_D0_X_COUNT, val)
+#define bfin_read_MDMA_D0_X_MODIFY()		bfin_read16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val) 	bfin_write16(MDMA_D0_X_MODIFY, val)
+#define bfin_read_MDMA_D0_Y_COUNT()		bfin_read16(MDMA_D0_Y_COUNT)
+#define bfin_write_MDMA_D0_Y_COUNT(val)		bfin_write16(MDMA_D0_Y_COUNT, val)
+#define bfin_read_MDMA_D0_Y_MODIFY()		bfin_read16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val) 	bfin_write16(MDMA_D0_Y_MODIFY, val)
+#define bfin_read_MDMA_D0_CURR_DESC_PTR() 	bfin_read32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) 	bfin_write32(MDMA_D0_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D0_CURR_ADDR() 		bfin_read32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val) 	bfin_write32(MDMA_D0_CURR_ADDR, val)
+#define bfin_read_MDMA_D0_IRQ_STATUS()		bfin_read16(MDMA_D0_IRQ_STATUS)
+#define bfin_write_MDMA_D0_IRQ_STATUS(val)	bfin_write16(MDMA_D0_IRQ_STATUS, val)
+#define bfin_read_MDMA_D0_PERIPHERAL_MAP()	bfin_read16(MDMA_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val)	bfin_write16(MDMA_D0_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_D0_CURR_X_COUNT()	bfin_read16(MDMA_D0_CURR_X_COUNT)
+#define bfin_write_MDMA_D0_CURR_X_COUNT(val)	bfin_write16(MDMA_D0_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D0_CURR_Y_COUNT()	bfin_read16(MDMA_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA_D0_CURR_Y_COUNT(val)	bfin_write16(MDMA_D0_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S0_NEXT_DESC_PTR() 	bfin_read32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_S0_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S0_START_ADDR() 		bfin_read32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val) 	bfin_write32(MDMA_S0_START_ADDR, val)
+#define bfin_read_MDMA_S0_CONFIG()		bfin_read16(MDMA_S0_CONFIG)
+#define bfin_write_MDMA_S0_CONFIG(val)		bfin_write16(MDMA_S0_CONFIG, val)
+#define bfin_read_MDMA_S0_X_COUNT()		bfin_read16(MDMA_S0_X_COUNT)
+#define bfin_write_MDMA_S0_X_COUNT(val)		bfin_write16(MDMA_S0_X_COUNT, val)
+#define bfin_read_MDMA_S0_X_MODIFY()		bfin_read16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val) 	bfin_write16(MDMA_S0_X_MODIFY, val)
+#define bfin_read_MDMA_S0_Y_COUNT()		bfin_read16(MDMA_S0_Y_COUNT)
+#define bfin_write_MDMA_S0_Y_COUNT(val)		bfin_write16(MDMA_S0_Y_COUNT, val)
+#define bfin_read_MDMA_S0_Y_MODIFY()		bfin_read16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val) 	bfin_write16(MDMA_S0_Y_MODIFY, val)
+#define bfin_read_MDMA_S0_CURR_DESC_PTR() 	bfin_read32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) 	bfin_write32(MDMA_S0_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S0_CURR_ADDR() 		bfin_read32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val) 	bfin_write32(MDMA_S0_CURR_ADDR, val)
+#define bfin_read_MDMA_S0_IRQ_STATUS()		bfin_read16(MDMA_S0_IRQ_STATUS)
+#define bfin_write_MDMA_S0_IRQ_STATUS(val)	bfin_write16(MDMA_S0_IRQ_STATUS, val)
+#define bfin_read_MDMA_S0_PERIPHERAL_MAP()	bfin_read16(MDMA_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val)	bfin_write16(MDMA_S0_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_S0_CURR_X_COUNT()	bfin_read16(MDMA_S0_CURR_X_COUNT)
+#define bfin_write_MDMA_S0_CURR_X_COUNT(val)	bfin_write16(MDMA_S0_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S0_CURR_Y_COUNT()	bfin_read16(MDMA_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA_S0_CURR_Y_COUNT(val)	bfin_write16(MDMA_S0_CURR_Y_COUNT, val)
+
+/* MDMA Stream 1 Registers */
+
+#define bfin_read_MDMA_D1_NEXT_DESC_PTR() 	bfin_read32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_D1_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D1_START_ADDR() 		bfin_read32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val) 	bfin_write32(MDMA_D1_START_ADDR, val)
+#define bfin_read_MDMA_D1_CONFIG()		bfin_read16(MDMA_D1_CONFIG)
+#define bfin_write_MDMA_D1_CONFIG(val)		bfin_write16(MDMA_D1_CONFIG, val)
+#define bfin_read_MDMA_D1_X_COUNT()		bfin_read16(MDMA_D1_X_COUNT)
+#define bfin_write_MDMA_D1_X_COUNT(val)		bfin_write16(MDMA_D1_X_COUNT, val)
+#define bfin_read_MDMA_D1_X_MODIFY()		bfin_read16(MDMA_D1_X_MODIFY)
+#define bfin_write_MDMA_D1_X_MODIFY(val) 	bfin_write16(MDMA_D1_X_MODIFY, val)
+#define bfin_read_MDMA_D1_Y_COUNT()		bfin_read16(MDMA_D1_Y_COUNT)
+#define bfin_write_MDMA_D1_Y_COUNT(val)		bfin_write16(MDMA_D1_Y_COUNT, val)
+#define bfin_read_MDMA_D1_Y_MODIFY()		bfin_read16(MDMA_D1_Y_MODIFY)
+#define bfin_write_MDMA_D1_Y_MODIFY(val) 	bfin_write16(MDMA_D1_Y_MODIFY, val)
+#define bfin_read_MDMA_D1_CURR_DESC_PTR() 	bfin_read32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) 	bfin_write32(MDMA_D1_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D1_CURR_ADDR() 		bfin_read32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val) 	bfin_write32(MDMA_D1_CURR_ADDR, val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()		bfin_read16(MDMA_D1_IRQ_STATUS)
+#define bfin_write_MDMA_D1_IRQ_STATUS(val)	bfin_write16(MDMA_D1_IRQ_STATUS, val)
+#define bfin_read_MDMA_D1_PERIPHERAL_MAP()	bfin_read16(MDMA_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val)	bfin_write16(MDMA_D1_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_D1_CURR_X_COUNT()	bfin_read16(MDMA_D1_CURR_X_COUNT)
+#define bfin_write_MDMA_D1_CURR_X_COUNT(val)	bfin_write16(MDMA_D1_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D1_CURR_Y_COUNT()	bfin_read16(MDMA_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA_D1_CURR_Y_COUNT(val)	bfin_write16(MDMA_D1_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S1_NEXT_DESC_PTR() 	bfin_read32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_S1_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S1_START_ADDR() 		bfin_read32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val) 	bfin_write32(MDMA_S1_START_ADDR, val)
+#define bfin_read_MDMA_S1_CONFIG()		bfin_read16(MDMA_S1_CONFIG)
+#define bfin_write_MDMA_S1_CONFIG(val)		bfin_write16(MDMA_S1_CONFIG, val)
+#define bfin_read_MDMA_S1_X_COUNT()		bfin_read16(MDMA_S1_X_COUNT)
+#define bfin_write_MDMA_S1_X_COUNT(val)		bfin_write16(MDMA_S1_X_COUNT, val)
+#define bfin_read_MDMA_S1_X_MODIFY()		bfin_read16(MDMA_S1_X_MODIFY)
+#define bfin_write_MDMA_S1_X_MODIFY(val) 	bfin_write16(MDMA_S1_X_MODIFY, val)
+#define bfin_read_MDMA_S1_Y_COUNT()		bfin_read16(MDMA_S1_Y_COUNT)
+#define bfin_write_MDMA_S1_Y_COUNT(val)		bfin_write16(MDMA_S1_Y_COUNT, val)
+#define bfin_read_MDMA_S1_Y_MODIFY()		bfin_read16(MDMA_S1_Y_MODIFY)
+#define bfin_write_MDMA_S1_Y_MODIFY(val) 	bfin_write16(MDMA_S1_Y_MODIFY, val)
+#define bfin_read_MDMA_S1_CURR_DESC_PTR() 	bfin_read32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) 	bfin_write32(MDMA_S1_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S1_CURR_ADDR() 		bfin_read32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val) 	bfin_write32(MDMA_S1_CURR_ADDR, val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()		bfin_read16(MDMA_S1_IRQ_STATUS)
+#define bfin_write_MDMA_S1_IRQ_STATUS(val)	bfin_write16(MDMA_S1_IRQ_STATUS, val)
+#define bfin_read_MDMA_S1_PERIPHERAL_MAP()	bfin_read16(MDMA_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val)	bfin_write16(MDMA_S1_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_S1_CURR_X_COUNT()	bfin_read16(MDMA_S1_CURR_X_COUNT)
+#define bfin_write_MDMA_S1_CURR_X_COUNT(val)	bfin_write16(MDMA_S1_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S1_CURR_Y_COUNT()	bfin_read16(MDMA_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA_S1_CURR_Y_COUNT(val)	bfin_write16(MDMA_S1_CURR_Y_COUNT, val)
+
+/* EPPI1 Registers */
+
+#define bfin_read_EPPI1_STATUS()		bfin_read16(EPPI1_STATUS)
+#define bfin_write_EPPI1_STATUS(val)		bfin_write16(EPPI1_STATUS, val)
+#define bfin_read_EPPI1_HCOUNT()		bfin_read16(EPPI1_HCOUNT)
+#define bfin_write_EPPI1_HCOUNT(val)		bfin_write16(EPPI1_HCOUNT, val)
+#define bfin_read_EPPI1_HDELAY()		bfin_read16(EPPI1_HDELAY)
+#define bfin_write_EPPI1_HDELAY(val)		bfin_write16(EPPI1_HDELAY, val)
+#define bfin_read_EPPI1_VCOUNT()		bfin_read16(EPPI1_VCOUNT)
+#define bfin_write_EPPI1_VCOUNT(val)		bfin_write16(EPPI1_VCOUNT, val)
+#define bfin_read_EPPI1_VDELAY()		bfin_read16(EPPI1_VDELAY)
+#define bfin_write_EPPI1_VDELAY(val)		bfin_write16(EPPI1_VDELAY, val)
+#define bfin_read_EPPI1_FRAME()			bfin_read16(EPPI1_FRAME)
+#define bfin_write_EPPI1_FRAME(val)		bfin_write16(EPPI1_FRAME, val)
+#define bfin_read_EPPI1_LINE()			bfin_read16(EPPI1_LINE)
+#define bfin_write_EPPI1_LINE(val)		bfin_write16(EPPI1_LINE, val)
+#define bfin_read_EPPI1_CLKDIV()		bfin_read16(EPPI1_CLKDIV)
+#define bfin_write_EPPI1_CLKDIV(val)		bfin_write16(EPPI1_CLKDIV, val)
+#define bfin_read_EPPI1_CONTROL()		bfin_read32(EPPI1_CONTROL)
+#define bfin_write_EPPI1_CONTROL(val)		bfin_write32(EPPI1_CONTROL, val)
+#define bfin_read_EPPI1_FS1W_HBL()		bfin_read32(EPPI1_FS1W_HBL)
+#define bfin_write_EPPI1_FS1W_HBL(val)		bfin_write32(EPPI1_FS1W_HBL, val)
+#define bfin_read_EPPI1_FS1P_AVPL()		bfin_read32(EPPI1_FS1P_AVPL)
+#define bfin_write_EPPI1_FS1P_AVPL(val)		bfin_write32(EPPI1_FS1P_AVPL, val)
+#define bfin_read_EPPI1_FS2W_LVB()		bfin_read32(EPPI1_FS2W_LVB)
+#define bfin_write_EPPI1_FS2W_LVB(val)		bfin_write32(EPPI1_FS2W_LVB, val)
+#define bfin_read_EPPI1_FS2P_LAVF()		bfin_read32(EPPI1_FS2P_LAVF)
+#define bfin_write_EPPI1_FS2P_LAVF(val)		bfin_write32(EPPI1_FS2P_LAVF, val)
+#define bfin_read_EPPI1_CLIP()			bfin_read32(EPPI1_CLIP)
+#define bfin_write_EPPI1_CLIP(val)		bfin_write32(EPPI1_CLIP, val)
+
+/* Port Interrubfin_read_()t 0 Registers (32-bit) */
+
+#define bfin_read_PINT0_MASK_SET()		bfin_read32(PINT0_MASK_SET)
+#define bfin_write_PINT0_MASK_SET(val)		bfin_write32(PINT0_MASK_SET, val)
+#define bfin_read_PINT0_MASK_CLEAR()		bfin_read32(PINT0_MASK_CLEAR)
+#define bfin_write_PINT0_MASK_CLEAR(val)	bfin_write32(PINT0_MASK_CLEAR, val)
+#define bfin_read_PINT0_REQUEST()		bfin_read32(PINT0_REQUEST)
+#define bfin_write_PINT0_REQUEST(val)		bfin_write32(PINT0_REQUEST, val)
+#define bfin_read_PINT0_ASSIGN()		bfin_read32(PINT0_ASSIGN)
+#define bfin_write_PINT0_ASSIGN(val)		bfin_write32(PINT0_ASSIGN, val)
+#define bfin_read_PINT0_EDGE_SET()		bfin_read32(PINT0_EDGE_SET)
+#define bfin_write_PINT0_EDGE_SET(val)		bfin_write32(PINT0_EDGE_SET, val)
+#define bfin_read_PINT0_EDGE_CLEAR()		bfin_read32(PINT0_EDGE_CLEAR)
+#define bfin_write_PINT0_EDGE_CLEAR(val)	bfin_write32(PINT0_EDGE_CLEAR, val)
+#define bfin_read_PINT0_INVERT_SET()		bfin_read32(PINT0_INVERT_SET)
+#define bfin_write_PINT0_INVERT_SET(val)	bfin_write32(PINT0_INVERT_SET, val)
+#define bfin_read_PINT0_INVERT_CLEAR()		bfin_read32(PINT0_INVERT_CLEAR)
+#define bfin_write_PINT0_INVERT_CLEAR(val)	bfin_write32(PINT0_INVERT_CLEAR, val)
+#define bfin_read_PINT0_PINSTATE()		bfin_read32(PINT0_PINSTATE)
+#define bfin_write_PINT0_PINSTATE(val)		bfin_write32(PINT0_PINSTATE, val)
+#define bfin_read_PINT0_LATCH()			bfin_read32(PINT0_LATCH)
+#define bfin_write_PINT0_LATCH(val)		bfin_write32(PINT0_LATCH, val)
+
+/* Port Interrubfin_read_()t 1 Registers (32-bit) */
+
+#define bfin_read_PINT1_MASK_SET()		bfin_read32(PINT1_MASK_SET)
+#define bfin_write_PINT1_MASK_SET(val)		bfin_write32(PINT1_MASK_SET, val)
+#define bfin_read_PINT1_MASK_CLEAR()		bfin_read32(PINT1_MASK_CLEAR)
+#define bfin_write_PINT1_MASK_CLEAR(val)	bfin_write32(PINT1_MASK_CLEAR, val)
+#define bfin_read_PINT1_REQUEST()		bfin_read32(PINT1_REQUEST)
+#define bfin_write_PINT1_REQUEST(val)		bfin_write32(PINT1_REQUEST, val)
+#define bfin_read_PINT1_ASSIGN()		bfin_read32(PINT1_ASSIGN)
+#define bfin_write_PINT1_ASSIGN(val)		bfin_write32(PINT1_ASSIGN, val)
+#define bfin_read_PINT1_EDGE_SET()		bfin_read32(PINT1_EDGE_SET)
+#define bfin_write_PINT1_EDGE_SET(val)		bfin_write32(PINT1_EDGE_SET, val)
+#define bfin_read_PINT1_EDGE_CLEAR()		bfin_read32(PINT1_EDGE_CLEAR)
+#define bfin_write_PINT1_EDGE_CLEAR(val)	bfin_write32(PINT1_EDGE_CLEAR, val)
+#define bfin_read_PINT1_INVERT_SET()		bfin_read32(PINT1_INVERT_SET)
+#define bfin_write_PINT1_INVERT_SET(val)	bfin_write32(PINT1_INVERT_SET, val)
+#define bfin_read_PINT1_INVERT_CLEAR()		bfin_read32(PINT1_INVERT_CLEAR)
+#define bfin_write_PINT1_INVERT_CLEAR(val)	bfin_write32(PINT1_INVERT_CLEAR, val)
+#define bfin_read_PINT1_PINSTATE()		bfin_read32(PINT1_PINSTATE)
+#define bfin_write_PINT1_PINSTATE(val)		bfin_write32(PINT1_PINSTATE, val)
+#define bfin_read_PINT1_LATCH()			bfin_read32(PINT1_LATCH)
+#define bfin_write_PINT1_LATCH(val)		bfin_write32(PINT1_LATCH, val)
+
+/* Port Interrubfin_read_()t 2 Registers (32-bit) */
+
+#define bfin_read_PINT2_MASK_SET()		bfin_read32(PINT2_MASK_SET)
+#define bfin_write_PINT2_MASK_SET(val)		bfin_write32(PINT2_MASK_SET, val)
+#define bfin_read_PINT2_MASK_CLEAR()		bfin_read32(PINT2_MASK_CLEAR)
+#define bfin_write_PINT2_MASK_CLEAR(val)	bfin_write32(PINT2_MASK_CLEAR, val)
+#define bfin_read_PINT2_REQUEST()		bfin_read32(PINT2_REQUEST)
+#define bfin_write_PINT2_REQUEST(val)		bfin_write32(PINT2_REQUEST, val)
+#define bfin_read_PINT2_ASSIGN()		bfin_read32(PINT2_ASSIGN)
+#define bfin_write_PINT2_ASSIGN(val)		bfin_write32(PINT2_ASSIGN, val)
+#define bfin_read_PINT2_EDGE_SET()		bfin_read32(PINT2_EDGE_SET)
+#define bfin_write_PINT2_EDGE_SET(val)		bfin_write32(PINT2_EDGE_SET, val)
+#define bfin_read_PINT2_EDGE_CLEAR()		bfin_read32(PINT2_EDGE_CLEAR)
+#define bfin_write_PINT2_EDGE_CLEAR(val)	bfin_write32(PINT2_EDGE_CLEAR, val)
+#define bfin_read_PINT2_INVERT_SET()		bfin_read32(PINT2_INVERT_SET)
+#define bfin_write_PINT2_INVERT_SET(val)	bfin_write32(PINT2_INVERT_SET, val)
+#define bfin_read_PINT2_INVERT_CLEAR()		bfin_read32(PINT2_INVERT_CLEAR)
+#define bfin_write_PINT2_INVERT_CLEAR(val)	bfin_write32(PINT2_INVERT_CLEAR, val)
+#define bfin_read_PINT2_PINSTATE()		bfin_read32(PINT2_PINSTATE)
+#define bfin_write_PINT2_PINSTATE(val)		bfin_write32(PINT2_PINSTATE, val)
+#define bfin_read_PINT2_LATCH()			bfin_read32(PINT2_LATCH)
+#define bfin_write_PINT2_LATCH(val)		bfin_write32(PINT2_LATCH, val)
+
+/* Port Interrubfin_read_()t 3 Registers (32-bit) */
+
+#define bfin_read_PINT3_MASK_SET()		bfin_read32(PINT3_MASK_SET)
+#define bfin_write_PINT3_MASK_SET(val)		bfin_write32(PINT3_MASK_SET, val)
+#define bfin_read_PINT3_MASK_CLEAR()		bfin_read32(PINT3_MASK_CLEAR)
+#define bfin_write_PINT3_MASK_CLEAR(val)	bfin_write32(PINT3_MASK_CLEAR, val)
+#define bfin_read_PINT3_REQUEST()		bfin_read32(PINT3_REQUEST)
+#define bfin_write_PINT3_REQUEST(val)		bfin_write32(PINT3_REQUEST, val)
+#define bfin_read_PINT3_ASSIGN()		bfin_read32(PINT3_ASSIGN)
+#define bfin_write_PINT3_ASSIGN(val)		bfin_write32(PINT3_ASSIGN, val)
+#define bfin_read_PINT3_EDGE_SET()		bfin_read32(PINT3_EDGE_SET)
+#define bfin_write_PINT3_EDGE_SET(val)		bfin_write32(PINT3_EDGE_SET, val)
+#define bfin_read_PINT3_EDGE_CLEAR()		bfin_read32(PINT3_EDGE_CLEAR)
+#define bfin_write_PINT3_EDGE_CLEAR(val)	bfin_write32(PINT3_EDGE_CLEAR, val)
+#define bfin_read_PINT3_INVERT_SET()		bfin_read32(PINT3_INVERT_SET)
+#define bfin_write_PINT3_INVERT_SET(val)	bfin_write32(PINT3_INVERT_SET, val)
+#define bfin_read_PINT3_INVERT_CLEAR()		bfin_read32(PINT3_INVERT_CLEAR)
+#define bfin_write_PINT3_INVERT_CLEAR(val)	bfin_write32(PINT3_INVERT_CLEAR, val)
+#define bfin_read_PINT3_PINSTATE()		bfin_read32(PINT3_PINSTATE)
+#define bfin_write_PINT3_PINSTATE(val)		bfin_write32(PINT3_PINSTATE, val)
+#define bfin_read_PINT3_LATCH()			bfin_read32(PINT3_LATCH)
+#define bfin_write_PINT3_LATCH(val)		bfin_write32(PINT3_LATCH, val)
+
+/* Port A Registers */
+
+#define bfin_read_PORTA_FER()		bfin_read16(PORTA_FER)
+#define bfin_write_PORTA_FER(val)	bfin_write16(PORTA_FER, val)
+#define bfin_read_PORTA()		bfin_read16(PORTA)
+#define bfin_write_PORTA(val)		bfin_write16(PORTA, val)
+#define bfin_read_PORTA_SET()		bfin_read16(PORTA_SET)
+#define bfin_write_PORTA_SET(val)	bfin_write16(PORTA_SET, val)
+#define bfin_read_PORTA_CLEAR()		bfin_read16(PORTA_CLEAR)
+#define bfin_write_PORTA_CLEAR(val)	bfin_write16(PORTA_CLEAR, val)
+#define bfin_read_PORTA_DIR_SET()	bfin_read16(PORTA_DIR_SET)
+#define bfin_write_PORTA_DIR_SET(val)	bfin_write16(PORTA_DIR_SET, val)
+#define bfin_read_PORTA_DIR_CLEAR()	bfin_read16(PORTA_DIR_CLEAR)
+#define bfin_write_PORTA_DIR_CLEAR(val)	bfin_write16(PORTA_DIR_CLEAR, val)
+#define bfin_read_PORTA_INEN()		bfin_read16(PORTA_INEN)
+#define bfin_write_PORTA_INEN(val)	bfin_write16(PORTA_INEN, val)
+#define bfin_read_PORTA_MUX()		bfin_read32(PORTA_MUX)
+#define bfin_write_PORTA_MUX(val)	bfin_write32(PORTA_MUX, val)
+
+/* Port B Registers */
+
+#define bfin_read_PORTB_FER()		bfin_read16(PORTB_FER)
+#define bfin_write_PORTB_FER(val)	bfin_write16(PORTB_FER, val)
+#define bfin_read_PORTB()		bfin_read16(PORTB)
+#define bfin_write_PORTB(val)		bfin_write16(PORTB, val)
+#define bfin_read_PORTB_SET()		bfin_read16(PORTB_SET)
+#define bfin_write_PORTB_SET(val)	bfin_write16(PORTB_SET, val)
+#define bfin_read_PORTB_CLEAR()		bfin_read16(PORTB_CLEAR)
+#define bfin_write_PORTB_CLEAR(val)	bfin_write16(PORTB_CLEAR, val)
+#define bfin_read_PORTB_DIR_SET()	bfin_read16(PORTB_DIR_SET)
+#define bfin_write_PORTB_DIR_SET(val)	bfin_write16(PORTB_DIR_SET, val)
+#define bfin_read_PORTB_DIR_CLEAR()	bfin_read16(PORTB_DIR_CLEAR)
+#define bfin_write_PORTB_DIR_CLEAR(val)	bfin_write16(PORTB_DIR_CLEAR, val)
+#define bfin_read_PORTB_INEN()		bfin_read16(PORTB_INEN)
+#define bfin_write_PORTB_INEN(val)	bfin_write16(PORTB_INEN, val)
+#define bfin_read_PORTB_MUX()		bfin_read32(PORTB_MUX)
+#define bfin_write_PORTB_MUX(val)	bfin_write32(PORTB_MUX, val)
+
+/* Port C Registers */
+
+#define bfin_read_PORTC_FER()		bfin_read16(PORTC_FER)
+#define bfin_write_PORTC_FER(val)	bfin_write16(PORTC_FER, val)
+#define bfin_read_PORTC()		bfin_read16(PORTC)
+#define bfin_write_PORTC(val)		bfin_write16(PORTC, val)
+#define bfin_read_PORTC_SET()		bfin_read16(PORTC_SET)
+#define bfin_write_PORTC_SET(val)	bfin_write16(PORTC_SET, val)
+#define bfin_read_PORTC_CLEAR()		bfin_read16(PORTC_CLEAR)
+#define bfin_write_PORTC_CLEAR(val)	bfin_write16(PORTC_CLEAR, val)
+#define bfin_read_PORTC_DIR_SET()	bfin_read16(PORTC_DIR_SET)
+#define bfin_write_PORTC_DIR_SET(val)	bfin_write16(PORTC_DIR_SET, val)
+#define bfin_read_PORTC_DIR_CLEAR()	bfin_read16(PORTC_DIR_CLEAR)
+#define bfin_write_PORTC_DIR_CLEAR(val)	bfin_write16(PORTC_DIR_CLEAR, val)
+#define bfin_read_PORTC_INEN()		bfin_read16(PORTC_INEN)
+#define bfin_write_PORTC_INEN(val)	bfin_write16(PORTC_INEN, val)
+#define bfin_read_PORTC_MUX()		bfin_read32(PORTC_MUX)
+#define bfin_write_PORTC_MUX(val)	bfin_write32(PORTC_MUX, val)
+
+/* Port D Registers */
+
+#define bfin_read_PORTD_FER()		bfin_read16(PORTD_FER)
+#define bfin_write_PORTD_FER(val)	bfin_write16(PORTD_FER, val)
+#define bfin_read_PORTD()		bfin_read16(PORTD)
+#define bfin_write_PORTD(val)		bfin_write16(PORTD, val)
+#define bfin_read_PORTD_SET()		bfin_read16(PORTD_SET)
+#define bfin_write_PORTD_SET(val)	bfin_write16(PORTD_SET, val)
+#define bfin_read_PORTD_CLEAR()		bfin_read16(PORTD_CLEAR)
+#define bfin_write_PORTD_CLEAR(val)	bfin_write16(PORTD_CLEAR, val)
+#define bfin_read_PORTD_DIR_SET()	bfin_read16(PORTD_DIR_SET)
+#define bfin_write_PORTD_DIR_SET(val)	bfin_write16(PORTD_DIR_SET, val)
+#define bfin_read_PORTD_DIR_CLEAR()	bfin_read16(PORTD_DIR_CLEAR)
+#define bfin_write_PORTD_DIR_CLEAR(val)	bfin_write16(PORTD_DIR_CLEAR, val)
+#define bfin_read_PORTD_INEN()		bfin_read16(PORTD_INEN)
+#define bfin_write_PORTD_INEN(val)	bfin_write16(PORTD_INEN, val)
+#define bfin_read_PORTD_MUX()		bfin_read32(PORTD_MUX)
+#define bfin_write_PORTD_MUX(val)	bfin_write32(PORTD_MUX, val)
+
+/* Port E Registers */
+
+#define bfin_read_PORTE_FER()		bfin_read16(PORTE_FER)
+#define bfin_write_PORTE_FER(val)	bfin_write16(PORTE_FER, val)
+#define bfin_read_PORTE()		bfin_read16(PORTE)
+#define bfin_write_PORTE(val)		bfin_write16(PORTE, val)
+#define bfin_read_PORTE_SET()		bfin_read16(PORTE_SET)
+#define bfin_write_PORTE_SET(val)	bfin_write16(PORTE_SET, val)
+#define bfin_read_PORTE_CLEAR()		bfin_read16(PORTE_CLEAR)
+#define bfin_write_PORTE_CLEAR(val)	bfin_write16(PORTE_CLEAR, val)
+#define bfin_read_PORTE_DIR_SET()	bfin_read16(PORTE_DIR_SET)
+#define bfin_write_PORTE_DIR_SET(val)	bfin_write16(PORTE_DIR_SET, val)
+#define bfin_read_PORTE_DIR_CLEAR()	bfin_read16(PORTE_DIR_CLEAR)
+#define bfin_write_PORTE_DIR_CLEAR(val)	bfin_write16(PORTE_DIR_CLEAR, val)
+#define bfin_read_PORTE_INEN()		bfin_read16(PORTE_INEN)
+#define bfin_write_PORTE_INEN(val)	bfin_write16(PORTE_INEN, val)
+#define bfin_read_PORTE_MUX()		bfin_read32(PORTE_MUX)
+#define bfin_write_PORTE_MUX(val)	bfin_write32(PORTE_MUX, val)
+
+/* Port F Registers */
+
+#define bfin_read_PORTF_FER()		bfin_read16(PORTF_FER)
+#define bfin_write_PORTF_FER(val)	bfin_write16(PORTF_FER, val)
+#define bfin_read_PORTF()		bfin_read16(PORTF)
+#define bfin_write_PORTF(val)		bfin_write16(PORTF, val)
+#define bfin_read_PORTF_SET()		bfin_read16(PORTF_SET)
+#define bfin_write_PORTF_SET(val)	bfin_write16(PORTF_SET, val)
+#define bfin_read_PORTF_CLEAR()		bfin_read16(PORTF_CLEAR)
+#define bfin_write_PORTF_CLEAR(val)	bfin_write16(PORTF_CLEAR, val)
+#define bfin_read_PORTF_DIR_SET()	bfin_read16(PORTF_DIR_SET)
+#define bfin_write_PORTF_DIR_SET(val)	bfin_write16(PORTF_DIR_SET, val)
+#define bfin_read_PORTF_DIR_CLEAR()	bfin_read16(PORTF_DIR_CLEAR)
+#define bfin_write_PORTF_DIR_CLEAR(val)	bfin_write16(PORTF_DIR_CLEAR, val)
+#define bfin_read_PORTF_INEN()		bfin_read16(PORTF_INEN)
+#define bfin_write_PORTF_INEN(val)	bfin_write16(PORTF_INEN, val)
+#define bfin_read_PORTF_MUX()		bfin_read32(PORTF_MUX)
+#define bfin_write_PORTF_MUX(val)	bfin_write32(PORTF_MUX, val)
+
+/* Port G Registers */
+
+#define bfin_read_PORTG_FER()		bfin_read16(PORTG_FER)
+#define bfin_write_PORTG_FER(val)	bfin_write16(PORTG_FER, val)
+#define bfin_read_PORTG()		bfin_read16(PORTG)
+#define bfin_write_PORTG(val)		bfin_write16(PORTG, val)
+#define bfin_read_PORTG_SET()		bfin_read16(PORTG_SET)
+#define bfin_write_PORTG_SET(val)	bfin_write16(PORTG_SET, val)
+#define bfin_read_PORTG_CLEAR()		bfin_read16(PORTG_CLEAR)
+#define bfin_write_PORTG_CLEAR(val)	bfin_write16(PORTG_CLEAR, val)
+#define bfin_read_PORTG_DIR_SET()	bfin_read16(PORTG_DIR_SET)
+#define bfin_write_PORTG_DIR_SET(val)	bfin_write16(PORTG_DIR_SET, val)
+#define bfin_read_PORTG_DIR_CLEAR()	bfin_read16(PORTG_DIR_CLEAR)
+#define bfin_write_PORTG_DIR_CLEAR(val)	bfin_write16(PORTG_DIR_CLEAR, val)
+#define bfin_read_PORTG_INEN()		bfin_read16(PORTG_INEN)
+#define bfin_write_PORTG_INEN(val)	bfin_write16(PORTG_INEN, val)
+#define bfin_read_PORTG_MUX()		bfin_read32(PORTG_MUX)
+#define bfin_write_PORTG_MUX(val)	bfin_write32(PORTG_MUX, val)
+
+/* Port H Registers */
+
+#define bfin_read_PORTH_FER()		bfin_read16(PORTH_FER)
+#define bfin_write_PORTH_FER(val)	bfin_write16(PORTH_FER, val)
+#define bfin_read_PORTH()		bfin_read16(PORTH)
+#define bfin_write_PORTH(val)		bfin_write16(PORTH, val)
+#define bfin_read_PORTH_SET()		bfin_read16(PORTH_SET)
+#define bfin_write_PORTH_SET(val)	bfin_write16(PORTH_SET, val)
+#define bfin_read_PORTH_CLEAR()		bfin_read16(PORTH_CLEAR)
+#define bfin_write_PORTH_CLEAR(val)	bfin_write16(PORTH_CLEAR, val)
+#define bfin_read_PORTH_DIR_SET()	bfin_read16(PORTH_DIR_SET)
+#define bfin_write_PORTH_DIR_SET(val)	bfin_write16(PORTH_DIR_SET, val)
+#define bfin_read_PORTH_DIR_CLEAR()	bfin_read16(PORTH_DIR_CLEAR)
+#define bfin_write_PORTH_DIR_CLEAR(val)	bfin_write16(PORTH_DIR_CLEAR, val)
+#define bfin_read_PORTH_INEN()		bfin_read16(PORTH_INEN)
+#define bfin_write_PORTH_INEN(val)	bfin_write16(PORTH_INEN, val)
+#define bfin_read_PORTH_MUX()		bfin_read32(PORTH_MUX)
+#define bfin_write_PORTH_MUX(val)	bfin_write32(PORTH_MUX, val)
+
+/* Port I Registers */
+
+#define bfin_read_PORTI_FER()		bfin_read16(PORTI_FER)
+#define bfin_write_PORTI_FER(val)	bfin_write16(PORTI_FER, val)
+#define bfin_read_PORTI()		bfin_read16(PORTI)
+#define bfin_write_PORTI(val)		bfin_write16(PORTI, val)
+#define bfin_read_PORTI_SET()		bfin_read16(PORTI_SET)
+#define bfin_write_PORTI_SET(val)	bfin_write16(PORTI_SET, val)
+#define bfin_read_PORTI_CLEAR()		bfin_read16(PORTI_CLEAR)
+#define bfin_write_PORTI_CLEAR(val)	bfin_write16(PORTI_CLEAR, val)
+#define bfin_read_PORTI_DIR_SET()	bfin_read16(PORTI_DIR_SET)
+#define bfin_write_PORTI_DIR_SET(val)	bfin_write16(PORTI_DIR_SET, val)
+#define bfin_read_PORTI_DIR_CLEAR()	bfin_read16(PORTI_DIR_CLEAR)
+#define bfin_write_PORTI_DIR_CLEAR(val)	bfin_write16(PORTI_DIR_CLEAR, val)
+#define bfin_read_PORTI_INEN()		bfin_read16(PORTI_INEN)
+#define bfin_write_PORTI_INEN(val)	bfin_write16(PORTI_INEN, val)
+#define bfin_read_PORTI_MUX()		bfin_read32(PORTI_MUX)
+#define bfin_write_PORTI_MUX(val)	bfin_write32(PORTI_MUX, val)
+
+/* Port J Registers */
+
+#define bfin_read_PORTJ_FER()		bfin_read16(PORTJ_FER)
+#define bfin_write_PORTJ_FER(val)	bfin_write16(PORTJ_FER, val)
+#define bfin_read_PORTJ()		bfin_read16(PORTJ)
+#define bfin_write_PORTJ(val)		bfin_write16(PORTJ, val)
+#define bfin_read_PORTJ_SET()		bfin_read16(PORTJ_SET)
+#define bfin_write_PORTJ_SET(val)	bfin_write16(PORTJ_SET, val)
+#define bfin_read_PORTJ_CLEAR()		bfin_read16(PORTJ_CLEAR)
+#define bfin_write_PORTJ_CLEAR(val)	bfin_write16(PORTJ_CLEAR, val)
+#define bfin_read_PORTJ_DIR_SET()	bfin_read16(PORTJ_DIR_SET)
+#define bfin_write_PORTJ_DIR_SET(val)	bfin_write16(PORTJ_DIR_SET, val)
+#define bfin_read_PORTJ_DIR_CLEAR()	bfin_read16(PORTJ_DIR_CLEAR)
+#define bfin_write_PORTJ_DIR_CLEAR(val)	bfin_write16(PORTJ_DIR_CLEAR, val)
+#define bfin_read_PORTJ_INEN()		bfin_read16(PORTJ_INEN)
+#define bfin_write_PORTJ_INEN(val)	bfin_write16(PORTJ_INEN, val)
+#define bfin_read_PORTJ_MUX()		bfin_read32(PORTJ_MUX)
+#define bfin_write_PORTJ_MUX(val)	bfin_write32(PORTJ_MUX, val)
+
+/* PWM Timer Registers */
+
+#define bfin_read_TIMER0_CONFIG()		bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val)		bfin_write16(TIMER0_CONFIG, val)
+#define bfin_read_TIMER0_COUNTER()		bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val)		bfin_write32(TIMER0_COUNTER, val)
+#define bfin_read_TIMER0_PERIOD()		bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val)		bfin_write32(TIMER0_PERIOD, val)
+#define bfin_read_TIMER0_WIDTH()		bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val)		bfin_write32(TIMER0_WIDTH, val)
+#define bfin_read_TIMER1_CONFIG()		bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val)		bfin_write16(TIMER1_CONFIG, val)
+#define bfin_read_TIMER1_COUNTER()		bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val)		bfin_write32(TIMER1_COUNTER, val)
+#define bfin_read_TIMER1_PERIOD()		bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val)		bfin_write32(TIMER1_PERIOD, val)
+#define bfin_read_TIMER1_WIDTH()		bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val)		bfin_write32(TIMER1_WIDTH, val)
+#define bfin_read_TIMER2_CONFIG()		bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val)		bfin_write16(TIMER2_CONFIG, val)
+#define bfin_read_TIMER2_COUNTER()		bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val)		bfin_write32(TIMER2_COUNTER, val)
+#define bfin_read_TIMER2_PERIOD()		bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val)		bfin_write32(TIMER2_PERIOD, val)
+#define bfin_read_TIMER2_WIDTH()		bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val)		bfin_write32(TIMER2_WIDTH, val)
+#define bfin_read_TIMER3_CONFIG()		bfin_read16(TIMER3_CONFIG)
+#define bfin_write_TIMER3_CONFIG(val)		bfin_write16(TIMER3_CONFIG, val)
+#define bfin_read_TIMER3_COUNTER()		bfin_read32(TIMER3_COUNTER)
+#define bfin_write_TIMER3_COUNTER(val)		bfin_write32(TIMER3_COUNTER, val)
+#define bfin_read_TIMER3_PERIOD()		bfin_read32(TIMER3_PERIOD)
+#define bfin_write_TIMER3_PERIOD(val)		bfin_write32(TIMER3_PERIOD, val)
+#define bfin_read_TIMER3_WIDTH()		bfin_read32(TIMER3_WIDTH)
+#define bfin_write_TIMER3_WIDTH(val)		bfin_write32(TIMER3_WIDTH, val)
+#define bfin_read_TIMER4_CONFIG()		bfin_read16(TIMER4_CONFIG)
+#define bfin_write_TIMER4_CONFIG(val)		bfin_write16(TIMER4_CONFIG, val)
+#define bfin_read_TIMER4_COUNTER()		bfin_read32(TIMER4_COUNTER)
+#define bfin_write_TIMER4_COUNTER(val)		bfin_write32(TIMER4_COUNTER, val)
+#define bfin_read_TIMER4_PERIOD()		bfin_read32(TIMER4_PERIOD)
+#define bfin_write_TIMER4_PERIOD(val)		bfin_write32(TIMER4_PERIOD, val)
+#define bfin_read_TIMER4_WIDTH()		bfin_read32(TIMER4_WIDTH)
+#define bfin_write_TIMER4_WIDTH(val)		bfin_write32(TIMER4_WIDTH, val)
+#define bfin_read_TIMER5_CONFIG()		bfin_read16(TIMER5_CONFIG)
+#define bfin_write_TIMER5_CONFIG(val)		bfin_write16(TIMER5_CONFIG, val)
+#define bfin_read_TIMER5_COUNTER()		bfin_read32(TIMER5_COUNTER)
+#define bfin_write_TIMER5_COUNTER(val)		bfin_write32(TIMER5_COUNTER, val)
+#define bfin_read_TIMER5_PERIOD()		bfin_read32(TIMER5_PERIOD)
+#define bfin_write_TIMER5_PERIOD(val)		bfin_write32(TIMER5_PERIOD, val)
+#define bfin_read_TIMER5_WIDTH()		bfin_read32(TIMER5_WIDTH)
+#define bfin_write_TIMER5_WIDTH(val)		bfin_write32(TIMER5_WIDTH, val)
+#define bfin_read_TIMER6_CONFIG()		bfin_read16(TIMER6_CONFIG)
+#define bfin_write_TIMER6_CONFIG(val)		bfin_write16(TIMER6_CONFIG, val)
+#define bfin_read_TIMER6_COUNTER()		bfin_read32(TIMER6_COUNTER)
+#define bfin_write_TIMER6_COUNTER(val)		bfin_write32(TIMER6_COUNTER, val)
+#define bfin_read_TIMER6_PERIOD()		bfin_read32(TIMER6_PERIOD)
+#define bfin_write_TIMER6_PERIOD(val)		bfin_write32(TIMER6_PERIOD, val)
+#define bfin_read_TIMER6_WIDTH()		bfin_read32(TIMER6_WIDTH)
+#define bfin_write_TIMER6_WIDTH(val)		bfin_write32(TIMER6_WIDTH, val)
+#define bfin_read_TIMER7_CONFIG()		bfin_read16(TIMER7_CONFIG)
+#define bfin_write_TIMER7_CONFIG(val)		bfin_write16(TIMER7_CONFIG, val)
+#define bfin_read_TIMER7_COUNTER()		bfin_read32(TIMER7_COUNTER)
+#define bfin_write_TIMER7_COUNTER(val)		bfin_write32(TIMER7_COUNTER, val)
+#define bfin_read_TIMER7_PERIOD()		bfin_read32(TIMER7_PERIOD)
+#define bfin_write_TIMER7_PERIOD(val)		bfin_write32(TIMER7_PERIOD, val)
+#define bfin_read_TIMER7_WIDTH()		bfin_read32(TIMER7_WIDTH)
+#define bfin_write_TIMER7_WIDTH(val)		bfin_write32(TIMER7_WIDTH, val)
+
+/* Timer Groubfin_read_() of 8 */
+
+#define bfin_read_TIMER_ENABLE0()		bfin_read16(TIMER_ENABLE0)
+#define bfin_write_TIMER_ENABLE0(val)		bfin_write16(TIMER_ENABLE0, val)
+#define bfin_read_TIMER_DISABLE0()		bfin_read16(TIMER_DISABLE0)
+#define bfin_write_TIMER_DISABLE0(val)		bfin_write16(TIMER_DISABLE0, val)
+#define bfin_read_TIMER_STATUS0()		bfin_read32(TIMER_STATUS0)
+#define bfin_write_TIMER_STATUS0(val)		bfin_write32(TIMER_STATUS0, val)
+
+/* DMAC1 Registers */
+
+#define bfin_read_DMAC1_TC_PER()			bfin_read16(DMAC1_TC_PER)
+#define bfin_write_DMAC1_TC_PER(val)		bfin_write16(DMAC1_TC_PER, val)
+#define bfin_read_DMAC1_TC_CNT()			bfin_read16(DMAC1_TC_CNT)
+#define bfin_write_DMAC1_TC_CNT(val)		bfin_write16(DMAC1_TC_CNT, val)
+
+/* DMA Channel 12 Registers */
+
+#define bfin_read_DMA12_NEXT_DESC_PTR() 	bfin_read32(DMA12_NEXT_DESC_PTR)
+#define bfin_write_DMA12_NEXT_DESC_PTR(val) 	bfin_write32(DMA12_NEXT_DESC_PTR, val)
+#define bfin_read_DMA12_START_ADDR() 		bfin_read32(DMA12_START_ADDR)
+#define bfin_write_DMA12_START_ADDR(val) 	bfin_write32(DMA12_START_ADDR, val)
+#define bfin_read_DMA12_CONFIG()		bfin_read16(DMA12_CONFIG)
+#define bfin_write_DMA12_CONFIG(val)		bfin_write16(DMA12_CONFIG, val)
+#define bfin_read_DMA12_X_COUNT()		bfin_read16(DMA12_X_COUNT)
+#define bfin_write_DMA12_X_COUNT(val)		bfin_write16(DMA12_X_COUNT, val)
+#define bfin_read_DMA12_X_MODIFY()		bfin_read16(DMA12_X_MODIFY)
+#define bfin_write_DMA12_X_MODIFY(val) 		bfin_write16(DMA12_X_MODIFY, val)
+#define bfin_read_DMA12_Y_COUNT()		bfin_read16(DMA12_Y_COUNT)
+#define bfin_write_DMA12_Y_COUNT(val)		bfin_write16(DMA12_Y_COUNT, val)
+#define bfin_read_DMA12_Y_MODIFY()		bfin_read16(DMA12_Y_MODIFY)
+#define bfin_write_DMA12_Y_MODIFY(val) 		bfin_write16(DMA12_Y_MODIFY, val)
+#define bfin_read_DMA12_CURR_DESC_PTR() 	bfin_read32(DMA12_CURR_DESC_PTR)
+#define bfin_write_DMA12_CURR_DESC_PTR(val) 	bfin_write32(DMA12_CURR_DESC_PTR, val)
+#define bfin_read_DMA12_CURR_ADDR() 		bfin_read32(DMA12_CURR_ADDR)
+#define bfin_write_DMA12_CURR_ADDR(val) 	bfin_write32(DMA12_CURR_ADDR, val)
+#define bfin_read_DMA12_IRQ_STATUS()		bfin_read16(DMA12_IRQ_STATUS)
+#define bfin_write_DMA12_IRQ_STATUS(val)	bfin_write16(DMA12_IRQ_STATUS, val)
+#define bfin_read_DMA12_PERIPHERAL_MAP()	bfin_read16(DMA12_PERIPHERAL_MAP)
+#define bfin_write_DMA12_PERIPHERAL_MAP(val)	bfin_write16(DMA12_PERIPHERAL_MAP, val)
+#define bfin_read_DMA12_CURR_X_COUNT()		bfin_read16(DMA12_CURR_X_COUNT)
+#define bfin_write_DMA12_CURR_X_COUNT(val)	bfin_write16(DMA12_CURR_X_COUNT, val)
+#define bfin_read_DMA12_CURR_Y_COUNT()		bfin_read16(DMA12_CURR_Y_COUNT)
+#define bfin_write_DMA12_CURR_Y_COUNT(val)	bfin_write16(DMA12_CURR_Y_COUNT, val)
+
+/* DMA Channel 13 Registers */
+
+#define bfin_read_DMA13_NEXT_DESC_PTR() 	bfin_read32(DMA13_NEXT_DESC_PTR)
+#define bfin_write_DMA13_NEXT_DESC_PTR(val) 	bfin_write32(DMA13_NEXT_DESC_PTR, val)
+#define bfin_read_DMA13_START_ADDR() 		bfin_read32(DMA13_START_ADDR)
+#define bfin_write_DMA13_START_ADDR(val) 	bfin_write32(DMA13_START_ADDR, val)
+#define bfin_read_DMA13_CONFIG()		bfin_read16(DMA13_CONFIG)
+#define bfin_write_DMA13_CONFIG(val)		bfin_write16(DMA13_CONFIG, val)
+#define bfin_read_DMA13_X_COUNT()		bfin_read16(DMA13_X_COUNT)
+#define bfin_write_DMA13_X_COUNT(val)		bfin_write16(DMA13_X_COUNT, val)
+#define bfin_read_DMA13_X_MODIFY()		bfin_read16(DMA13_X_MODIFY)
+#define bfin_write_DMA13_X_MODIFY(val) 		bfin_write16(DMA13_X_MODIFY, val)
+#define bfin_read_DMA13_Y_COUNT()		bfin_read16(DMA13_Y_COUNT)
+#define bfin_write_DMA13_Y_COUNT(val)		bfin_write16(DMA13_Y_COUNT, val)
+#define bfin_read_DMA13_Y_MODIFY()		bfin_read16(DMA13_Y_MODIFY)
+#define bfin_write_DMA13_Y_MODIFY(val) 		bfin_write16(DMA13_Y_MODIFY, val)
+#define bfin_read_DMA13_CURR_DESC_PTR() 	bfin_read32(DMA13_CURR_DESC_PTR)
+#define bfin_write_DMA13_CURR_DESC_PTR(val) 	bfin_write32(DMA13_CURR_DESC_PTR, val)
+#define bfin_read_DMA13_CURR_ADDR() 		bfin_read32(DMA13_CURR_ADDR)
+#define bfin_write_DMA13_CURR_ADDR(val) 	bfin_write32(DMA13_CURR_ADDR, val)
+#define bfin_read_DMA13_IRQ_STATUS()		bfin_read16(DMA13_IRQ_STATUS)
+#define bfin_write_DMA13_IRQ_STATUS(val)	bfin_write16(DMA13_IRQ_STATUS, val)
+#define bfin_read_DMA13_PERIPHERAL_MAP()	bfin_read16(DMA13_PERIPHERAL_MAP)
+#define bfin_write_DMA13_PERIPHERAL_MAP(val)	bfin_write16(DMA13_PERIPHERAL_MAP, val)
+#define bfin_read_DMA13_CURR_X_COUNT()		bfin_read16(DMA13_CURR_X_COUNT)
+#define bfin_write_DMA13_CURR_X_COUNT(val)	bfin_write16(DMA13_CURR_X_COUNT, val)
+#define bfin_read_DMA13_CURR_Y_COUNT()		bfin_read16(DMA13_CURR_Y_COUNT)
+#define bfin_write_DMA13_CURR_Y_COUNT(val)	bfin_write16(DMA13_CURR_Y_COUNT, val)
+
+/* DMA Channel 14 Registers */
+
+#define bfin_read_DMA14_NEXT_DESC_PTR() 	bfin_read32(DMA14_NEXT_DESC_PTR)
+#define bfin_write_DMA14_NEXT_DESC_PTR(val) 	bfin_write32(DMA14_NEXT_DESC_PTR, val)
+#define bfin_read_DMA14_START_ADDR() 		bfin_read32(DMA14_START_ADDR)
+#define bfin_write_DMA14_START_ADDR(val) 	bfin_write32(DMA14_START_ADDR, val)
+#define bfin_read_DMA14_CONFIG()		bfin_read16(DMA14_CONFIG)
+#define bfin_write_DMA14_CONFIG(val)		bfin_write16(DMA14_CONFIG, val)
+#define bfin_read_DMA14_X_COUNT()		bfin_read16(DMA14_X_COUNT)
+#define bfin_write_DMA14_X_COUNT(val)		bfin_write16(DMA14_X_COUNT, val)
+#define bfin_read_DMA14_X_MODIFY()		bfin_read16(DMA14_X_MODIFY)
+#define bfin_write_DMA14_X_MODIFY(val) 		bfin_write16(DMA14_X_MODIFY, val)
+#define bfin_read_DMA14_Y_COUNT()		bfin_read16(DMA14_Y_COUNT)
+#define bfin_write_DMA14_Y_COUNT(val)		bfin_write16(DMA14_Y_COUNT, val)
+#define bfin_read_DMA14_Y_MODIFY()		bfin_read16(DMA14_Y_MODIFY)
+#define bfin_write_DMA14_Y_MODIFY(val) 		bfin_write16(DMA14_Y_MODIFY, val)
+#define bfin_read_DMA14_CURR_DESC_PTR() 	bfin_read32(DMA14_CURR_DESC_PTR)
+#define bfin_write_DMA14_CURR_DESC_PTR(val) 	bfin_write32(DMA14_CURR_DESC_PTR, val)
+#define bfin_read_DMA14_CURR_ADDR() 		bfin_read32(DMA14_CURR_ADDR)
+#define bfin_write_DMA14_CURR_ADDR(val) 	bfin_write32(DMA14_CURR_ADDR, val)
+#define bfin_read_DMA14_IRQ_STATUS()		bfin_read16(DMA14_IRQ_STATUS)
+#define bfin_write_DMA14_IRQ_STATUS(val)	bfin_write16(DMA14_IRQ_STATUS, val)
+#define bfin_read_DMA14_PERIPHERAL_MAP()	bfin_read16(DMA14_PERIPHERAL_MAP)
+#define bfin_write_DMA14_PERIPHERAL_MAP(val)	bfin_write16(DMA14_PERIPHERAL_MAP, val)
+#define bfin_read_DMA14_CURR_X_COUNT()		bfin_read16(DMA14_CURR_X_COUNT)
+#define bfin_write_DMA14_CURR_X_COUNT(val)	bfin_write16(DMA14_CURR_X_COUNT, val)
+#define bfin_read_DMA14_CURR_Y_COUNT()		bfin_read16(DMA14_CURR_Y_COUNT)
+#define bfin_write_DMA14_CURR_Y_COUNT(val)	bfin_write16(DMA14_CURR_Y_COUNT, val)
+
+/* DMA Channel 15 Registers */
+
+#define bfin_read_DMA15_NEXT_DESC_PTR() 	bfin_read32(DMA15_NEXT_DESC_PTR)
+#define bfin_write_DMA15_NEXT_DESC_PTR(val) 	bfin_write32(DMA15_NEXT_DESC_PTR, val)
+#define bfin_read_DMA15_START_ADDR() 		bfin_read32(DMA15_START_ADDR)
+#define bfin_write_DMA15_START_ADDR(val) 	bfin_write32(DMA15_START_ADDR, val)
+#define bfin_read_DMA15_CONFIG()		bfin_read16(DMA15_CONFIG)
+#define bfin_write_DMA15_CONFIG(val)		bfin_write16(DMA15_CONFIG, val)
+#define bfin_read_DMA15_X_COUNT()		bfin_read16(DMA15_X_COUNT)
+#define bfin_write_DMA15_X_COUNT(val)		bfin_write16(DMA15_X_COUNT, val)
+#define bfin_read_DMA15_X_MODIFY()		bfin_read16(DMA15_X_MODIFY)
+#define bfin_write_DMA15_X_MODIFY(val) 		bfin_write16(DMA15_X_MODIFY, val)
+#define bfin_read_DMA15_Y_COUNT()		bfin_read16(DMA15_Y_COUNT)
+#define bfin_write_DMA15_Y_COUNT(val)		bfin_write16(DMA15_Y_COUNT, val)
+#define bfin_read_DMA15_Y_MODIFY()		bfin_read16(DMA15_Y_MODIFY)
+#define bfin_write_DMA15_Y_MODIFY(val) 		bfin_write16(DMA15_Y_MODIFY, val)
+#define bfin_read_DMA15_CURR_DESC_PTR() 	bfin_read32(DMA15_CURR_DESC_PTR)
+#define bfin_write_DMA15_CURR_DESC_PTR(val) 	bfin_write32(DMA15_CURR_DESC_PTR, val)
+#define bfin_read_DMA15_CURR_ADDR() 		bfin_read32(DMA15_CURR_ADDR)
+#define bfin_write_DMA15_CURR_ADDR(val) 	bfin_write32(DMA15_CURR_ADDR, val)
+#define bfin_read_DMA15_IRQ_STATUS()		bfin_read16(DMA15_IRQ_STATUS)
+#define bfin_write_DMA15_IRQ_STATUS(val)	bfin_write16(DMA15_IRQ_STATUS, val)
+#define bfin_read_DMA15_PERIPHERAL_MAP()	bfin_read16(DMA15_PERIPHERAL_MAP)
+#define bfin_write_DMA15_PERIPHERAL_MAP(val)	bfin_write16(DMA15_PERIPHERAL_MAP, val)
+#define bfin_read_DMA15_CURR_X_COUNT()		bfin_read16(DMA15_CURR_X_COUNT)
+#define bfin_write_DMA15_CURR_X_COUNT(val)	bfin_write16(DMA15_CURR_X_COUNT, val)
+#define bfin_read_DMA15_CURR_Y_COUNT()		bfin_read16(DMA15_CURR_Y_COUNT)
+#define bfin_write_DMA15_CURR_Y_COUNT(val)	bfin_write16(DMA15_CURR_Y_COUNT, val)
+
+/* DMA Channel 16 Registers */
+
+#define bfin_read_DMA16_NEXT_DESC_PTR() 	bfin_read32(DMA16_NEXT_DESC_PTR)
+#define bfin_write_DMA16_NEXT_DESC_PTR(val) 	bfin_write32(DMA16_NEXT_DESC_PTR, val)
+#define bfin_read_DMA16_START_ADDR() 		bfin_read32(DMA16_START_ADDR)
+#define bfin_write_DMA16_START_ADDR(val) 	bfin_write32(DMA16_START_ADDR, val)
+#define bfin_read_DMA16_CONFIG()		bfin_read16(DMA16_CONFIG)
+#define bfin_write_DMA16_CONFIG(val)		bfin_write16(DMA16_CONFIG, val)
+#define bfin_read_DMA16_X_COUNT()		bfin_read16(DMA16_X_COUNT)
+#define bfin_write_DMA16_X_COUNT(val)		bfin_write16(DMA16_X_COUNT, val)
+#define bfin_read_DMA16_X_MODIFY()		bfin_read16(DMA16_X_MODIFY)
+#define bfin_write_DMA16_X_MODIFY(val) 		bfin_write16(DMA16_X_MODIFY, val)
+#define bfin_read_DMA16_Y_COUNT()		bfin_read16(DMA16_Y_COUNT)
+#define bfin_write_DMA16_Y_COUNT(val)		bfin_write16(DMA16_Y_COUNT, val)
+#define bfin_read_DMA16_Y_MODIFY()		bfin_read16(DMA16_Y_MODIFY)
+#define bfin_write_DMA16_Y_MODIFY(val) 		bfin_write16(DMA16_Y_MODIFY, val)
+#define bfin_read_DMA16_CURR_DESC_PTR() 	bfin_read32(DMA16_CURR_DESC_PTR)
+#define bfin_write_DMA16_CURR_DESC_PTR(val) 	bfin_write32(DMA16_CURR_DESC_PTR, val)
+#define bfin_read_DMA16_CURR_ADDR() 		bfin_read32(DMA16_CURR_ADDR)
+#define bfin_write_DMA16_CURR_ADDR(val) 	bfin_write32(DMA16_CURR_ADDR, val)
+#define bfin_read_DMA16_IRQ_STATUS()		bfin_read16(DMA16_IRQ_STATUS)
+#define bfin_write_DMA16_IRQ_STATUS(val)	bfin_write16(DMA16_IRQ_STATUS, val)
+#define bfin_read_DMA16_PERIPHERAL_MAP()	bfin_read16(DMA16_PERIPHERAL_MAP)
+#define bfin_write_DMA16_PERIPHERAL_MAP(val)	bfin_write16(DMA16_PERIPHERAL_MAP, val)
+#define bfin_read_DMA16_CURR_X_COUNT()		bfin_read16(DMA16_CURR_X_COUNT)
+#define bfin_write_DMA16_CURR_X_COUNT(val)	bfin_write16(DMA16_CURR_X_COUNT, val)
+#define bfin_read_DMA16_CURR_Y_COUNT()		bfin_read16(DMA16_CURR_Y_COUNT)
+#define bfin_write_DMA16_CURR_Y_COUNT(val)	bfin_write16(DMA16_CURR_Y_COUNT, val)
+
+/* DMA Channel 17 Registers */
+
+#define bfin_read_DMA17_NEXT_DESC_PTR() 	bfin_read32(DMA17_NEXT_DESC_PTR)
+#define bfin_write_DMA17_NEXT_DESC_PTR(val) 	bfin_write32(DMA17_NEXT_DESC_PTR, val)
+#define bfin_read_DMA17_START_ADDR() 		bfin_read32(DMA17_START_ADDR)
+#define bfin_write_DMA17_START_ADDR(val) 	bfin_write32(DMA17_START_ADDR, val)
+#define bfin_read_DMA17_CONFIG()		bfin_read16(DMA17_CONFIG)
+#define bfin_write_DMA17_CONFIG(val)		bfin_write16(DMA17_CONFIG, val)
+#define bfin_read_DMA17_X_COUNT()		bfin_read16(DMA17_X_COUNT)
+#define bfin_write_DMA17_X_COUNT(val)		bfin_write16(DMA17_X_COUNT, val)
+#define bfin_read_DMA17_X_MODIFY()		bfin_read16(DMA17_X_MODIFY)
+#define bfin_write_DMA17_X_MODIFY(val) 		bfin_write16(DMA17_X_MODIFY, val)
+#define bfin_read_DMA17_Y_COUNT()		bfin_read16(DMA17_Y_COUNT)
+#define bfin_write_DMA17_Y_COUNT(val)		bfin_write16(DMA17_Y_COUNT, val)
+#define bfin_read_DMA17_Y_MODIFY()		bfin_read16(DMA17_Y_MODIFY)
+#define bfin_write_DMA17_Y_MODIFY(val) 		bfin_write16(DMA17_Y_MODIFY, val)
+#define bfin_read_DMA17_CURR_DESC_PTR() 	bfin_read32(DMA17_CURR_DESC_PTR)
+#define bfin_write_DMA17_CURR_DESC_PTR(val) 	bfin_write32(DMA17_CURR_DESC_PTR, val)
+#define bfin_read_DMA17_CURR_ADDR() 		bfin_read32(DMA17_CURR_ADDR)
+#define bfin_write_DMA17_CURR_ADDR(val) 	bfin_write32(DMA17_CURR_ADDR, val)
+#define bfin_read_DMA17_IRQ_STATUS()		bfin_read16(DMA17_IRQ_STATUS)
+#define bfin_write_DMA17_IRQ_STATUS(val)	bfin_write16(DMA17_IRQ_STATUS, val)
+#define bfin_read_DMA17_PERIPHERAL_MAP()	bfin_read16(DMA17_PERIPHERAL_MAP)
+#define bfin_write_DMA17_PERIPHERAL_MAP(val)	bfin_write16(DMA17_PERIPHERAL_MAP, val)
+#define bfin_read_DMA17_CURR_X_COUNT()		bfin_read16(DMA17_CURR_X_COUNT)
+#define bfin_write_DMA17_CURR_X_COUNT(val)	bfin_write16(DMA17_CURR_X_COUNT, val)
+#define bfin_read_DMA17_CURR_Y_COUNT()		bfin_read16(DMA17_CURR_Y_COUNT)
+#define bfin_write_DMA17_CURR_Y_COUNT(val)	bfin_write16(DMA17_CURR_Y_COUNT, val)
+
+/* DMA Channel 18 Registers */
+
+#define bfin_read_DMA18_NEXT_DESC_PTR() 	bfin_read32(DMA18_NEXT_DESC_PTR)
+#define bfin_write_DMA18_NEXT_DESC_PTR(val) 	bfin_write32(DMA18_NEXT_DESC_PTR, val)
+#define bfin_read_DMA18_START_ADDR() 		bfin_read32(DMA18_START_ADDR)
+#define bfin_write_DMA18_START_ADDR(val) 	bfin_write32(DMA18_START_ADDR, val)
+#define bfin_read_DMA18_CONFIG()		bfin_read16(DMA18_CONFIG)
+#define bfin_write_DMA18_CONFIG(val)		bfin_write16(DMA18_CONFIG, val)
+#define bfin_read_DMA18_X_COUNT()		bfin_read16(DMA18_X_COUNT)
+#define bfin_write_DMA18_X_COUNT(val)		bfin_write16(DMA18_X_COUNT, val)
+#define bfin_read_DMA18_X_MODIFY()		bfin_read16(DMA18_X_MODIFY)
+#define bfin_write_DMA18_X_MODIFY(val) 		bfin_write16(DMA18_X_MODIFY, val)
+#define bfin_read_DMA18_Y_COUNT()		bfin_read16(DMA18_Y_COUNT)
+#define bfin_write_DMA18_Y_COUNT(val)		bfin_write16(DMA18_Y_COUNT, val)
+#define bfin_read_DMA18_Y_MODIFY()		bfin_read16(DMA18_Y_MODIFY)
+#define bfin_write_DMA18_Y_MODIFY(val) 		bfin_write16(DMA18_Y_MODIFY, val)
+#define bfin_read_DMA18_CURR_DESC_PTR() 	bfin_read32(DMA18_CURR_DESC_PTR)
+#define bfin_write_DMA18_CURR_DESC_PTR(val) 	bfin_write32(DMA18_CURR_DESC_PTR, val)
+#define bfin_read_DMA18_CURR_ADDR() 		bfin_read32(DMA18_CURR_ADDR)
+#define bfin_write_DMA18_CURR_ADDR(val) 	bfin_write32(DMA18_CURR_ADDR, val)
+#define bfin_read_DMA18_IRQ_STATUS()		bfin_read16(DMA18_IRQ_STATUS)
+#define bfin_write_DMA18_IRQ_STATUS(val)	bfin_write16(DMA18_IRQ_STATUS, val)
+#define bfin_read_DMA18_PERIPHERAL_MAP()	bfin_read16(DMA18_PERIPHERAL_MAP)
+#define bfin_write_DMA18_PERIPHERAL_MAP(val)	bfin_write16(DMA18_PERIPHERAL_MAP, val)
+#define bfin_read_DMA18_CURR_X_COUNT()		bfin_read16(DMA18_CURR_X_COUNT)
+#define bfin_write_DMA18_CURR_X_COUNT(val)	bfin_write16(DMA18_CURR_X_COUNT, val)
+#define bfin_read_DMA18_CURR_Y_COUNT()		bfin_read16(DMA18_CURR_Y_COUNT)
+#define bfin_write_DMA18_CURR_Y_COUNT(val)	bfin_write16(DMA18_CURR_Y_COUNT, val)
+
+/* DMA Channel 19 Registers */
+
+#define bfin_read_DMA19_NEXT_DESC_PTR() 	bfin_read32(DMA19_NEXT_DESC_PTR)
+#define bfin_write_DMA19_NEXT_DESC_PTR(val) 	bfin_write32(DMA19_NEXT_DESC_PTR, val)
+#define bfin_read_DMA19_START_ADDR() 		bfin_read32(DMA19_START_ADDR)
+#define bfin_write_DMA19_START_ADDR(val) 	bfin_write32(DMA19_START_ADDR, val)
+#define bfin_read_DMA19_CONFIG()		bfin_read16(DMA19_CONFIG)
+#define bfin_write_DMA19_CONFIG(val)		bfin_write16(DMA19_CONFIG, val)
+#define bfin_read_DMA19_X_COUNT()		bfin_read16(DMA19_X_COUNT)
+#define bfin_write_DMA19_X_COUNT(val)		bfin_write16(DMA19_X_COUNT, val)
+#define bfin_read_DMA19_X_MODIFY()		bfin_read16(DMA19_X_MODIFY)
+#define bfin_write_DMA19_X_MODIFY(val) 		bfin_write16(DMA19_X_MODIFY, val)
+#define bfin_read_DMA19_Y_COUNT()		bfin_read16(DMA19_Y_COUNT)
+#define bfin_write_DMA19_Y_COUNT(val)		bfin_write16(DMA19_Y_COUNT, val)
+#define bfin_read_DMA19_Y_MODIFY()		bfin_read16(DMA19_Y_MODIFY)
+#define bfin_write_DMA19_Y_MODIFY(val) 		bfin_write16(DMA19_Y_MODIFY, val)
+#define bfin_read_DMA19_CURR_DESC_PTR() 	bfin_read32(DMA19_CURR_DESC_PTR)
+#define bfin_write_DMA19_CURR_DESC_PTR(val) 	bfin_write32(DMA19_CURR_DESC_PTR, val)
+#define bfin_read_DMA19_CURR_ADDR() 		bfin_read32(DMA19_CURR_ADDR)
+#define bfin_write_DMA19_CURR_ADDR(val) 	bfin_write32(DMA19_CURR_ADDR, val)
+#define bfin_read_DMA19_IRQ_STATUS()		bfin_read16(DMA19_IRQ_STATUS)
+#define bfin_write_DMA19_IRQ_STATUS(val)	bfin_write16(DMA19_IRQ_STATUS, val)
+#define bfin_read_DMA19_PERIPHERAL_MAP()	bfin_read16(DMA19_PERIPHERAL_MAP)
+#define bfin_write_DMA19_PERIPHERAL_MAP(val)	bfin_write16(DMA19_PERIPHERAL_MAP, val)
+#define bfin_read_DMA19_CURR_X_COUNT()		bfin_read16(DMA19_CURR_X_COUNT)
+#define bfin_write_DMA19_CURR_X_COUNT(val)	bfin_write16(DMA19_CURR_X_COUNT, val)
+#define bfin_read_DMA19_CURR_Y_COUNT()		bfin_read16(DMA19_CURR_Y_COUNT)
+#define bfin_write_DMA19_CURR_Y_COUNT(val)	bfin_write16(DMA19_CURR_Y_COUNT, val)
+
+/* DMA Channel 20 Registers */
+
+#define bfin_read_DMA20_NEXT_DESC_PTR() 	bfin_read32(DMA20_NEXT_DESC_PTR)
+#define bfin_write_DMA20_NEXT_DESC_PTR(val) 	bfin_write32(DMA20_NEXT_DESC_PTR, val)
+#define bfin_read_DMA20_START_ADDR() 		bfin_read32(DMA20_START_ADDR)
+#define bfin_write_DMA20_START_ADDR(val) 	bfin_write32(DMA20_START_ADDR, val)
+#define bfin_read_DMA20_CONFIG()		bfin_read16(DMA20_CONFIG)
+#define bfin_write_DMA20_CONFIG(val)		bfin_write16(DMA20_CONFIG, val)
+#define bfin_read_DMA20_X_COUNT()		bfin_read16(DMA20_X_COUNT)
+#define bfin_write_DMA20_X_COUNT(val)		bfin_write16(DMA20_X_COUNT, val)
+#define bfin_read_DMA20_X_MODIFY()		bfin_read16(DMA20_X_MODIFY)
+#define bfin_write_DMA20_X_MODIFY(val) 		bfin_write16(DMA20_X_MODIFY, val)
+#define bfin_read_DMA20_Y_COUNT()		bfin_read16(DMA20_Y_COUNT)
+#define bfin_write_DMA20_Y_COUNT(val)		bfin_write16(DMA20_Y_COUNT, val)
+#define bfin_read_DMA20_Y_MODIFY()		bfin_read16(DMA20_Y_MODIFY)
+#define bfin_write_DMA20_Y_MODIFY(val) 		bfin_write16(DMA20_Y_MODIFY, val)
+#define bfin_read_DMA20_CURR_DESC_PTR() 	bfin_read32(DMA20_CURR_DESC_PTR)
+#define bfin_write_DMA20_CURR_DESC_PTR(val) 	bfin_write32(DMA20_CURR_DESC_PTR, val)
+#define bfin_read_DMA20_CURR_ADDR() 		bfin_read32(DMA20_CURR_ADDR)
+#define bfin_write_DMA20_CURR_ADDR(val) 	bfin_write32(DMA20_CURR_ADDR, val)
+#define bfin_read_DMA20_IRQ_STATUS()		bfin_read16(DMA20_IRQ_STATUS)
+#define bfin_write_DMA20_IRQ_STATUS(val)	bfin_write16(DMA20_IRQ_STATUS, val)
+#define bfin_read_DMA20_PERIPHERAL_MAP()	bfin_read16(DMA20_PERIPHERAL_MAP)
+#define bfin_write_DMA20_PERIPHERAL_MAP(val)	bfin_write16(DMA20_PERIPHERAL_MAP, val)
+#define bfin_read_DMA20_CURR_X_COUNT()		bfin_read16(DMA20_CURR_X_COUNT)
+#define bfin_write_DMA20_CURR_X_COUNT(val)	bfin_write16(DMA20_CURR_X_COUNT, val)
+#define bfin_read_DMA20_CURR_Y_COUNT()		bfin_read16(DMA20_CURR_Y_COUNT)
+#define bfin_write_DMA20_CURR_Y_COUNT(val)	bfin_write16(DMA20_CURR_Y_COUNT, val)
+
+/* DMA Channel 21 Registers */
+
+#define bfin_read_DMA21_NEXT_DESC_PTR() 	bfin_read32(DMA21_NEXT_DESC_PTR)
+#define bfin_write_DMA21_NEXT_DESC_PTR(val) 	bfin_write32(DMA21_NEXT_DESC_PTR, val)
+#define bfin_read_DMA21_START_ADDR() 		bfin_read32(DMA21_START_ADDR)
+#define bfin_write_DMA21_START_ADDR(val) 	bfin_write32(DMA21_START_ADDR, val)
+#define bfin_read_DMA21_CONFIG()		bfin_read16(DMA21_CONFIG)
+#define bfin_write_DMA21_CONFIG(val)		bfin_write16(DMA21_CONFIG, val)
+#define bfin_read_DMA21_X_COUNT()		bfin_read16(DMA21_X_COUNT)
+#define bfin_write_DMA21_X_COUNT(val)		bfin_write16(DMA21_X_COUNT, val)
+#define bfin_read_DMA21_X_MODIFY()		bfin_read16(DMA21_X_MODIFY)
+#define bfin_write_DMA21_X_MODIFY(val) 		bfin_write16(DMA21_X_MODIFY, val)
+#define bfin_read_DMA21_Y_COUNT()		bfin_read16(DMA21_Y_COUNT)
+#define bfin_write_DMA21_Y_COUNT(val)		bfin_write16(DMA21_Y_COUNT, val)
+#define bfin_read_DMA21_Y_MODIFY()		bfin_read16(DMA21_Y_MODIFY)
+#define bfin_write_DMA21_Y_MODIFY(val) 		bfin_write16(DMA21_Y_MODIFY, val)
+#define bfin_read_DMA21_CURR_DESC_PTR() 	bfin_read32(DMA21_CURR_DESC_PTR)
+#define bfin_write_DMA21_CURR_DESC_PTR(val) 	bfin_write32(DMA21_CURR_DESC_PTR, val)
+#define bfin_read_DMA21_CURR_ADDR() 		bfin_read32(DMA21_CURR_ADDR)
+#define bfin_write_DMA21_CURR_ADDR(val) 	bfin_write32(DMA21_CURR_ADDR, val)
+#define bfin_read_DMA21_IRQ_STATUS()		bfin_read16(DMA21_IRQ_STATUS)
+#define bfin_write_DMA21_IRQ_STATUS(val)	bfin_write16(DMA21_IRQ_STATUS, val)
+#define bfin_read_DMA21_PERIPHERAL_MAP()	bfin_read16(DMA21_PERIPHERAL_MAP)
+#define bfin_write_DMA21_PERIPHERAL_MAP(val)	bfin_write16(DMA21_PERIPHERAL_MAP, val)
+#define bfin_read_DMA21_CURR_X_COUNT()		bfin_read16(DMA21_CURR_X_COUNT)
+#define bfin_write_DMA21_CURR_X_COUNT(val)	bfin_write16(DMA21_CURR_X_COUNT, val)
+#define bfin_read_DMA21_CURR_Y_COUNT()		bfin_read16(DMA21_CURR_Y_COUNT)
+#define bfin_write_DMA21_CURR_Y_COUNT(val)	bfin_write16(DMA21_CURR_Y_COUNT, val)
+
+/* DMA Channel 22 Registers */
+
+#define bfin_read_DMA22_NEXT_DESC_PTR() 	bfin_read32(DMA22_NEXT_DESC_PTR)
+#define bfin_write_DMA22_NEXT_DESC_PTR(val) 	bfin_write32(DMA22_NEXT_DESC_PTR, val)
+#define bfin_read_DMA22_START_ADDR() 		bfin_read32(DMA22_START_ADDR)
+#define bfin_write_DMA22_START_ADDR(val) 	bfin_write32(DMA22_START_ADDR, val)
+#define bfin_read_DMA22_CONFIG()		bfin_read16(DMA22_CONFIG)
+#define bfin_write_DMA22_CONFIG(val)		bfin_write16(DMA22_CONFIG, val)
+#define bfin_read_DMA22_X_COUNT()		bfin_read16(DMA22_X_COUNT)
+#define bfin_write_DMA22_X_COUNT(val)		bfin_write16(DMA22_X_COUNT, val)
+#define bfin_read_DMA22_X_MODIFY()		bfin_read16(DMA22_X_MODIFY)
+#define bfin_write_DMA22_X_MODIFY(val) 		bfin_write16(DMA22_X_MODIFY, val)
+#define bfin_read_DMA22_Y_COUNT()		bfin_read16(DMA22_Y_COUNT)
+#define bfin_write_DMA22_Y_COUNT(val)		bfin_write16(DMA22_Y_COUNT, val)
+#define bfin_read_DMA22_Y_MODIFY()		bfin_read16(DMA22_Y_MODIFY)
+#define bfin_write_DMA22_Y_MODIFY(val) 		bfin_write16(DMA22_Y_MODIFY, val)
+#define bfin_read_DMA22_CURR_DESC_PTR() 	bfin_read32(DMA22_CURR_DESC_PTR)
+#define bfin_write_DMA22_CURR_DESC_PTR(val) 	bfin_write32(DMA22_CURR_DESC_PTR, val)
+#define bfin_read_DMA22_CURR_ADDR() 		bfin_read32(DMA22_CURR_ADDR)
+#define bfin_write_DMA22_CURR_ADDR(val) 	bfin_write32(DMA22_CURR_ADDR, val)
+#define bfin_read_DMA22_IRQ_STATUS()		bfin_read16(DMA22_IRQ_STATUS)
+#define bfin_write_DMA22_IRQ_STATUS(val)	bfin_write16(DMA22_IRQ_STATUS, val)
+#define bfin_read_DMA22_PERIPHERAL_MAP()	bfin_read16(DMA22_PERIPHERAL_MAP)
+#define bfin_write_DMA22_PERIPHERAL_MAP(val)	bfin_write16(DMA22_PERIPHERAL_MAP, val)
+#define bfin_read_DMA22_CURR_X_COUNT()		bfin_read16(DMA22_CURR_X_COUNT)
+#define bfin_write_DMA22_CURR_X_COUNT(val)	bfin_write16(DMA22_CURR_X_COUNT, val)
+#define bfin_read_DMA22_CURR_Y_COUNT()		bfin_read16(DMA22_CURR_Y_COUNT)
+#define bfin_write_DMA22_CURR_Y_COUNT(val)	bfin_write16(DMA22_CURR_Y_COUNT, val)
+
+/* DMA Channel 23 Registers */
+
+#define bfin_read_DMA23_NEXT_DESC_PTR() 		bfin_read32(DMA23_NEXT_DESC_PTR)
+#define bfin_write_DMA23_NEXT_DESC_PTR(val) 		bfin_write32(DMA23_NEXT_DESC_PTR, val)
+#define bfin_read_DMA23_START_ADDR() 			bfin_read32(DMA23_START_ADDR)
+#define bfin_write_DMA23_START_ADDR(val) 		bfin_write32(DMA23_START_ADDR, val)
+#define bfin_read_DMA23_CONFIG()			bfin_read16(DMA23_CONFIG)
+#define bfin_write_DMA23_CONFIG(val)			bfin_write16(DMA23_CONFIG, val)
+#define bfin_read_DMA23_X_COUNT()			bfin_read16(DMA23_X_COUNT)
+#define bfin_write_DMA23_X_COUNT(val)			bfin_write16(DMA23_X_COUNT, val)
+#define bfin_read_DMA23_X_MODIFY()			bfin_read16(DMA23_X_MODIFY)
+#define bfin_write_DMA23_X_MODIFY(val) 			bfin_write16(DMA23_X_MODIFY, val)
+#define bfin_read_DMA23_Y_COUNT()			bfin_read16(DMA23_Y_COUNT)
+#define bfin_write_DMA23_Y_COUNT(val)			bfin_write16(DMA23_Y_COUNT, val)
+#define bfin_read_DMA23_Y_MODIFY()			bfin_read16(DMA23_Y_MODIFY)
+#define bfin_write_DMA23_Y_MODIFY(val) 			bfin_write16(DMA23_Y_MODIFY, val)
+#define bfin_read_DMA23_CURR_DESC_PTR() 		bfin_read32(DMA23_CURR_DESC_PTR)
+#define bfin_write_DMA23_CURR_DESC_PTR(val) 		bfin_write32(DMA23_CURR_DESC_PTR, val)
+#define bfin_read_DMA23_CURR_ADDR() 			bfin_read32(DMA23_CURR_ADDR)
+#define bfin_write_DMA23_CURR_ADDR(val) 		bfin_write32(DMA23_CURR_ADDR, val)
+#define bfin_read_DMA23_IRQ_STATUS()			bfin_read16(DMA23_IRQ_STATUS)
+#define bfin_write_DMA23_IRQ_STATUS(val)		bfin_write16(DMA23_IRQ_STATUS, val)
+#define bfin_read_DMA23_PERIPHERAL_MAP()		bfin_read16(DMA23_PERIPHERAL_MAP)
+#define bfin_write_DMA23_PERIPHERAL_MAP(val)		bfin_write16(DMA23_PERIPHERAL_MAP, val)
+#define bfin_read_DMA23_CURR_X_COUNT()			bfin_read16(DMA23_CURR_X_COUNT)
+#define bfin_write_DMA23_CURR_X_COUNT(val)		bfin_write16(DMA23_CURR_X_COUNT, val)
+#define bfin_read_DMA23_CURR_Y_COUNT()			bfin_read16(DMA23_CURR_Y_COUNT)
+#define bfin_write_DMA23_CURR_Y_COUNT(val)		bfin_write16(DMA23_CURR_Y_COUNT, val)
+
+/* MDMA Stream 2 Registers */
+
+#define bfin_read_MDMA_D2_NEXT_DESC_PTR() 		bfin_read32(MDMA_D2_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D2_NEXT_DESC_PTR(val) 		bfin_write32(MDMA_D2_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D2_START_ADDR() 			bfin_read32(MDMA_D2_START_ADDR)
+#define bfin_write_MDMA_D2_START_ADDR(val) 		bfin_write32(MDMA_D2_START_ADDR, val)
+#define bfin_read_MDMA_D2_CONFIG()			bfin_read16(MDMA_D2_CONFIG)
+#define bfin_write_MDMA_D2_CONFIG(val)			bfin_write16(MDMA_D2_CONFIG, val)
+#define bfin_read_MDMA_D2_X_COUNT()			bfin_read16(MDMA_D2_X_COUNT)
+#define bfin_write_MDMA_D2_X_COUNT(val)			bfin_write16(MDMA_D2_X_COUNT, val)
+#define bfin_read_MDMA_D2_X_MODIFY()			bfin_read16(MDMA_D2_X_MODIFY)
+#define bfin_write_MDMA_D2_X_MODIFY(val) 		bfin_write16(MDMA_D2_X_MODIFY, val)
+#define bfin_read_MDMA_D2_Y_COUNT()			bfin_read16(MDMA_D2_Y_COUNT)
+#define bfin_write_MDMA_D2_Y_COUNT(val)			bfin_write16(MDMA_D2_Y_COUNT, val)
+#define bfin_read_MDMA_D2_Y_MODIFY()			bfin_read16(MDMA_D2_Y_MODIFY)
+#define bfin_write_MDMA_D2_Y_MODIFY(val) 		bfin_write16(MDMA_D2_Y_MODIFY, val)
+#define bfin_read_MDMA_D2_CURR_DESC_PTR() 		bfin_read32(MDMA_D2_CURR_DESC_PTR)
+#define bfin_write_MDMA_D2_CURR_DESC_PTR(val) 		bfin_write32(MDMA_D2_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D2_CURR_ADDR() 			bfin_read32(MDMA_D2_CURR_ADDR)
+#define bfin_write_MDMA_D2_CURR_ADDR(val) 		bfin_write32(MDMA_D2_CURR_ADDR, val)
+#define bfin_read_MDMA_D2_IRQ_STATUS()			bfin_read16(MDMA_D2_IRQ_STATUS)
+#define bfin_write_MDMA_D2_IRQ_STATUS(val)		bfin_write16(MDMA_D2_IRQ_STATUS, val)
+#define bfin_read_MDMA_D2_PERIPHERAL_MAP()		bfin_read16(MDMA_D2_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D2_PERIPHERAL_MAP(val)		bfin_write16(MDMA_D2_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_D2_CURR_X_COUNT()		bfin_read16(MDMA_D2_CURR_X_COUNT)
+#define bfin_write_MDMA_D2_CURR_X_COUNT(val)		bfin_write16(MDMA_D2_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D2_CURR_Y_COUNT()		bfin_read16(MDMA_D2_CURR_Y_COUNT)
+#define bfin_write_MDMA_D2_CURR_Y_COUNT(val)		bfin_write16(MDMA_D2_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S2_NEXT_DESC_PTR() 		bfin_read32(MDMA_S2_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S2_NEXT_DESC_PTR(val) 		bfin_write32(MDMA_S2_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S2_START_ADDR() 			bfin_read32(MDMA_S2_START_ADDR)
+#define bfin_write_MDMA_S2_START_ADDR(val) 		bfin_write32(MDMA_S2_START_ADDR, val)
+#define bfin_read_MDMA_S2_CONFIG()			bfin_read16(MDMA_S2_CONFIG)
+#define bfin_write_MDMA_S2_CONFIG(val)			bfin_write16(MDMA_S2_CONFIG, val)
+#define bfin_read_MDMA_S2_X_COUNT()			bfin_read16(MDMA_S2_X_COUNT)
+#define bfin_write_MDMA_S2_X_COUNT(val)			bfin_write16(MDMA_S2_X_COUNT, val)
+#define bfin_read_MDMA_S2_X_MODIFY()			bfin_read16(MDMA_S2_X_MODIFY)
+#define bfin_write_MDMA_S2_X_MODIFY(val) 		bfin_write16(MDMA_S2_X_MODIFY, val)
+#define bfin_read_MDMA_S2_Y_COUNT()			bfin_read16(MDMA_S2_Y_COUNT)
+#define bfin_write_MDMA_S2_Y_COUNT(val)			bfin_write16(MDMA_S2_Y_COUNT, val)
+#define bfin_read_MDMA_S2_Y_MODIFY()			bfin_read16(MDMA_S2_Y_MODIFY)
+#define bfin_write_MDMA_S2_Y_MODIFY(val) 		bfin_write16(MDMA_S2_Y_MODIFY, val)
+#define bfin_read_MDMA_S2_CURR_DESC_PTR() 		bfin_read32(MDMA_S2_CURR_DESC_PTR)
+#define bfin_write_MDMA_S2_CURR_DESC_PTR(val) 		bfin_write32(MDMA_S2_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S2_CURR_ADDR() 			bfin_read32(MDMA_S2_CURR_ADDR)
+#define bfin_write_MDMA_S2_CURR_ADDR(val) 		bfin_write32(MDMA_S2_CURR_ADDR, val)
+#define bfin_read_MDMA_S2_IRQ_STATUS()			bfin_read16(MDMA_S2_IRQ_STATUS)
+#define bfin_write_MDMA_S2_IRQ_STATUS(val)		bfin_write16(MDMA_S2_IRQ_STATUS, val)
+#define bfin_read_MDMA_S2_PERIPHERAL_MAP()		bfin_read16(MDMA_S2_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S2_PERIPHERAL_MAP(val)		bfin_write16(MDMA_S2_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_S2_CURR_X_COUNT()		bfin_read16(MDMA_S2_CURR_X_COUNT)
+#define bfin_write_MDMA_S2_CURR_X_COUNT(val)		bfin_write16(MDMA_S2_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S2_CURR_Y_COUNT()		bfin_read16(MDMA_S2_CURR_Y_COUNT)
+#define bfin_write_MDMA_S2_CURR_Y_COUNT(val)		bfin_write16(MDMA_S2_CURR_Y_COUNT, val)
+
+/* MDMA Stream 3 Registers */
+
+#define bfin_read_MDMA_D3_NEXT_DESC_PTR() 		bfin_read32(MDMA_D3_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D3_NEXT_DESC_PTR(val) 		bfin_write32(MDMA_D3_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D3_START_ADDR() 			bfin_read32(MDMA_D3_START_ADDR)
+#define bfin_write_MDMA_D3_START_ADDR(val) 		bfin_write32(MDMA_D3_START_ADDR, val)
+#define bfin_read_MDMA_D3_CONFIG()			bfin_read16(MDMA_D3_CONFIG)
+#define bfin_write_MDMA_D3_CONFIG(val)			bfin_write16(MDMA_D3_CONFIG, val)
+#define bfin_read_MDMA_D3_X_COUNT()			bfin_read16(MDMA_D3_X_COUNT)
+#define bfin_write_MDMA_D3_X_COUNT(val)			bfin_write16(MDMA_D3_X_COUNT, val)
+#define bfin_read_MDMA_D3_X_MODIFY()			bfin_read16(MDMA_D3_X_MODIFY)
+#define bfin_write_MDMA_D3_X_MODIFY(val) 		bfin_write16(MDMA_D3_X_MODIFY, val)
+#define bfin_read_MDMA_D3_Y_COUNT()			bfin_read16(MDMA_D3_Y_COUNT)
+#define bfin_write_MDMA_D3_Y_COUNT(val)			bfin_write16(MDMA_D3_Y_COUNT, val)
+#define bfin_read_MDMA_D3_Y_MODIFY()			bfin_read16(MDMA_D3_Y_MODIFY)
+#define bfin_write_MDMA_D3_Y_MODIFY(val) 		bfin_write16(MDMA_D3_Y_MODIFY, val)
+#define bfin_read_MDMA_D3_CURR_DESC_PTR() 		bfin_read32(MDMA_D3_CURR_DESC_PTR)
+#define bfin_write_MDMA_D3_CURR_DESC_PTR(val) 		bfin_write32(MDMA_D3_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D3_CURR_ADDR() 			bfin_read32(MDMA_D3_CURR_ADDR)
+#define bfin_write_MDMA_D3_CURR_ADDR(val) 		bfin_write32(MDMA_D3_CURR_ADDR, val)
+#define bfin_read_MDMA_D3_IRQ_STATUS()			bfin_read16(MDMA_D3_IRQ_STATUS)
+#define bfin_write_MDMA_D3_IRQ_STATUS(val)		bfin_write16(MDMA_D3_IRQ_STATUS, val)
+#define bfin_read_MDMA_D3_PERIPHERAL_MAP()		bfin_read16(MDMA_D3_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D3_PERIPHERAL_MAP(val)		bfin_write16(MDMA_D3_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_D3_CURR_X_COUNT()		bfin_read16(MDMA_D3_CURR_X_COUNT)
+#define bfin_write_MDMA_D3_CURR_X_COUNT(val)		bfin_write16(MDMA_D3_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D3_CURR_Y_COUNT()		bfin_read16(MDMA_D3_CURR_Y_COUNT)
+#define bfin_write_MDMA_D3_CURR_Y_COUNT(val)		bfin_write16(MDMA_D3_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S3_NEXT_DESC_PTR() 		bfin_read32(MDMA_S3_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S3_NEXT_DESC_PTR(val) 		bfin_write32(MDMA_S3_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S3_START_ADDR() 			bfin_read32(MDMA_S3_START_ADDR)
+#define bfin_write_MDMA_S3_START_ADDR(val) 		bfin_write32(MDMA_S3_START_ADDR, val)
+#define bfin_read_MDMA_S3_CONFIG()			bfin_read16(MDMA_S3_CONFIG)
+#define bfin_write_MDMA_S3_CONFIG(val)			bfin_write16(MDMA_S3_CONFIG, val)
+#define bfin_read_MDMA_S3_X_COUNT()			bfin_read16(MDMA_S3_X_COUNT)
+#define bfin_write_MDMA_S3_X_COUNT(val)			bfin_write16(MDMA_S3_X_COUNT, val)
+#define bfin_read_MDMA_S3_X_MODIFY()			bfin_read16(MDMA_S3_X_MODIFY)
+#define bfin_write_MDMA_S3_X_MODIFY(val) 		bfin_write16(MDMA_S3_X_MODIFY, val)
+#define bfin_read_MDMA_S3_Y_COUNT()			bfin_read16(MDMA_S3_Y_COUNT)
+#define bfin_write_MDMA_S3_Y_COUNT(val)			bfin_write16(MDMA_S3_Y_COUNT, val)
+#define bfin_read_MDMA_S3_Y_MODIFY()			bfin_read16(MDMA_S3_Y_MODIFY)
+#define bfin_write_MDMA_S3_Y_MODIFY(val) 		bfin_write16(MDMA_S3_Y_MODIFY, val)
+#define bfin_read_MDMA_S3_CURR_DESC_PTR() 		bfin_read32(MDMA_S3_CURR_DESC_PTR)
+#define bfin_write_MDMA_S3_CURR_DESC_PTR(val) 		bfin_write32(MDMA_S3_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S3_CURR_ADDR() 			bfin_read32(MDMA_S3_CURR_ADDR)
+#define bfin_write_MDMA_S3_CURR_ADDR(val) 		bfin_write32(MDMA_S3_CURR_ADDR, val)
+#define bfin_read_MDMA_S3_IRQ_STATUS()			bfin_read16(MDMA_S3_IRQ_STATUS)
+#define bfin_write_MDMA_S3_IRQ_STATUS(val)		bfin_write16(MDMA_S3_IRQ_STATUS, val)
+#define bfin_read_MDMA_S3_PERIPHERAL_MAP()		bfin_read16(MDMA_S3_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S3_PERIPHERAL_MAP(val)		bfin_write16(MDMA_S3_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_S3_CURR_X_COUNT()		bfin_read16(MDMA_S3_CURR_X_COUNT)
+#define bfin_write_MDMA_S3_CURR_X_COUNT(val)		bfin_write16(MDMA_S3_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S3_CURR_Y_COUNT()		bfin_read16(MDMA_S3_CURR_Y_COUNT)
+#define bfin_write_MDMA_S3_CURR_Y_COUNT(val)		bfin_write16(MDMA_S3_CURR_Y_COUNT, val)
+
+/* UART1 Registers */
+
+#define bfin_read_UART1_DLL()			bfin_read16(UART1_DLL)
+#define bfin_write_UART1_DLL(val)		bfin_write16(UART1_DLL, val)
+#define bfin_read_UART1_DLH()			bfin_read16(UART1_DLH)
+#define bfin_write_UART1_DLH(val)		bfin_write16(UART1_DLH, val)
+#define bfin_read_UART1_GCTL()			bfin_read16(UART1_GCTL)
+#define bfin_write_UART1_GCTL(val)		bfin_write16(UART1_GCTL, val)
+#define bfin_read_UART1_LCR()			bfin_read16(UART1_LCR)
+#define bfin_write_UART1_LCR(val)		bfin_write16(UART1_LCR, val)
+#define bfin_read_UART1_MCR()			bfin_read16(UART1_MCR)
+#define bfin_write_UART1_MCR(val)		bfin_write16(UART1_MCR, val)
+#define bfin_read_UART1_LSR()			bfin_read16(UART1_LSR)
+#define bfin_write_UART1_LSR(val)		bfin_write16(UART1_LSR, val)
+#define bfin_read_UART1_MSR()			bfin_read16(UART1_MSR)
+#define bfin_write_UART1_MSR(val)		bfin_write16(UART1_MSR, val)
+#define bfin_read_UART1_SCR()			bfin_read16(UART1_SCR)
+#define bfin_write_UART1_SCR(val)		bfin_write16(UART1_SCR, val)
+#define bfin_read_UART1_IER_SET()		bfin_read16(UART1_IER_SET)
+#define bfin_write_UART1_IER_SET(val)		bfin_write16(UART1_IER_SET, val)
+#define bfin_read_UART1_IER_CLEAR()		bfin_read16(UART1_IER_CLEAR)
+#define bfin_write_UART1_IER_CLEAR(val)		bfin_write16(UART1_IER_CLEAR, val)
+#define bfin_read_UART1_THR()			bfin_read16(UART1_THR)
+#define bfin_write_UART1_THR(val)		bfin_write16(UART1_THR, val)
+#define bfin_read_UART1_RBR()			bfin_read16(UART1_RBR)
+#define bfin_write_UART1_RBR(val)		bfin_write16(UART1_RBR, val)
+
+/* UART2 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */
+
+/* SPI1 Registers */
+
+#define bfin_read_SPI1_CTL()			bfin_read16(SPI1_CTL)
+#define bfin_write_SPI1_CTL(val)		bfin_write16(SPI1_CTL, val)
+#define bfin_read_SPI1_FLG()			bfin_read16(SPI1_FLG)
+#define bfin_write_SPI1_FLG(val)		bfin_write16(SPI1_FLG, val)
+#define bfin_read_SPI1_STAT()			bfin_read16(SPI1_STAT)
+#define bfin_write_SPI1_STAT(val)		bfin_write16(SPI1_STAT, val)
+#define bfin_read_SPI1_TDBR()			bfin_read16(SPI1_TDBR)
+#define bfin_write_SPI1_TDBR(val)		bfin_write16(SPI1_TDBR, val)
+#define bfin_read_SPI1_RDBR()			bfin_read16(SPI1_RDBR)
+#define bfin_write_SPI1_RDBR(val)		bfin_write16(SPI1_RDBR, val)
+#define bfin_read_SPI1_BAUD()			bfin_read16(SPI1_BAUD)
+#define bfin_write_SPI1_BAUD(val)		bfin_write16(SPI1_BAUD, val)
+#define bfin_read_SPI1_SHADOW()			bfin_read16(SPI1_SHADOW)
+#define bfin_write_SPI1_SHADOW(val)		bfin_write16(SPI1_SHADOW, val)
+
+/* SPORT2 Registers */
+
+#define bfin_read_SPORT2_TCR1()			bfin_read16(SPORT2_TCR1)
+#define bfin_write_SPORT2_TCR1(val)		bfin_write16(SPORT2_TCR1, val)
+#define bfin_read_SPORT2_TCR2()			bfin_read16(SPORT2_TCR2)
+#define bfin_write_SPORT2_TCR2(val)		bfin_write16(SPORT2_TCR2, val)
+#define bfin_read_SPORT2_TCLKDIV()		bfin_read16(SPORT2_TCLKDIV)
+#define bfin_write_SPORT2_TCLKDIV(val)		bfin_write16(SPORT2_TCLKDIV, val)
+#define bfin_read_SPORT2_TFSDIV()		bfin_read16(SPORT2_TFSDIV)
+#define bfin_write_SPORT2_TFSDIV(val)		bfin_write16(SPORT2_TFSDIV, val)
+#define bfin_read_SPORT2_TX()			bfin_read32(SPORT2_TX)
+#define bfin_write_SPORT2_TX(val)		bfin_write32(SPORT2_TX, val)
+#define bfin_read_SPORT2_RX()			bfin_read32(SPORT2_RX)
+#define bfin_write_SPORT2_RX(val)		bfin_write32(SPORT2_RX, val)
+#define bfin_read_SPORT2_RCR1()			bfin_read16(SPORT2_RCR1)
+#define bfin_write_SPORT2_RCR1(val)		bfin_write16(SPORT2_RCR1, val)
+#define bfin_read_SPORT2_RCR2()			bfin_read16(SPORT2_RCR2)
+#define bfin_write_SPORT2_RCR2(val)		bfin_write16(SPORT2_RCR2, val)
+#define bfin_read_SPORT2_RCLKDIV()		bfin_read16(SPORT2_RCLKDIV)
+#define bfin_write_SPORT2_RCLKDIV(val)		bfin_write16(SPORT2_RCLKDIV, val)
+#define bfin_read_SPORT2_RFSDIV()		bfin_read16(SPORT2_RFSDIV)
+#define bfin_write_SPORT2_RFSDIV(val)		bfin_write16(SPORT2_RFSDIV, val)
+#define bfin_read_SPORT2_STAT()			bfin_read16(SPORT2_STAT)
+#define bfin_write_SPORT2_STAT(val)		bfin_write16(SPORT2_STAT, val)
+#define bfin_read_SPORT2_CHNL()			bfin_read16(SPORT2_CHNL)
+#define bfin_write_SPORT2_CHNL(val)		bfin_write16(SPORT2_CHNL, val)
+#define bfin_read_SPORT2_MCMC1()		bfin_read16(SPORT2_MCMC1)
+#define bfin_write_SPORT2_MCMC1(val)		bfin_write16(SPORT2_MCMC1, val)
+#define bfin_read_SPORT2_MCMC2()		bfin_read16(SPORT2_MCMC2)
+#define bfin_write_SPORT2_MCMC2(val)		bfin_write16(SPORT2_MCMC2, val)
+#define bfin_read_SPORT2_MTCS0()		bfin_read32(SPORT2_MTCS0)
+#define bfin_write_SPORT2_MTCS0(val)		bfin_write32(SPORT2_MTCS0, val)
+#define bfin_read_SPORT2_MTCS1()		bfin_read32(SPORT2_MTCS1)
+#define bfin_write_SPORT2_MTCS1(val)		bfin_write32(SPORT2_MTCS1, val)
+#define bfin_read_SPORT2_MTCS2()		bfin_read32(SPORT2_MTCS2)
+#define bfin_write_SPORT2_MTCS2(val)		bfin_write32(SPORT2_MTCS2, val)
+#define bfin_read_SPORT2_MTCS3()		bfin_read32(SPORT2_MTCS3)
+#define bfin_write_SPORT2_MTCS3(val)		bfin_write32(SPORT2_MTCS3, val)
+#define bfin_read_SPORT2_MRCS0()		bfin_read32(SPORT2_MRCS0)
+#define bfin_write_SPORT2_MRCS0(val)		bfin_write32(SPORT2_MRCS0, val)
+#define bfin_read_SPORT2_MRCS1()		bfin_read32(SPORT2_MRCS1)
+#define bfin_write_SPORT2_MRCS1(val)		bfin_write32(SPORT2_MRCS1, val)
+#define bfin_read_SPORT2_MRCS2()		bfin_read32(SPORT2_MRCS2)
+#define bfin_write_SPORT2_MRCS2(val)		bfin_write32(SPORT2_MRCS2, val)
+#define bfin_read_SPORT2_MRCS3()		bfin_read32(SPORT2_MRCS3)
+#define bfin_write_SPORT2_MRCS3(val)		bfin_write32(SPORT2_MRCS3, val)
+
+/* SPORT3 Registers */
+
+#define bfin_read_SPORT3_TCR1()			bfin_read16(SPORT3_TCR1)
+#define bfin_write_SPORT3_TCR1(val)		bfin_write16(SPORT3_TCR1, val)
+#define bfin_read_SPORT3_TCR2()			bfin_read16(SPORT3_TCR2)
+#define bfin_write_SPORT3_TCR2(val)		bfin_write16(SPORT3_TCR2, val)
+#define bfin_read_SPORT3_TCLKDIV()		bfin_read16(SPORT3_TCLKDIV)
+#define bfin_write_SPORT3_TCLKDIV(val)		bfin_write16(SPORT3_TCLKDIV, val)
+#define bfin_read_SPORT3_TFSDIV()		bfin_read16(SPORT3_TFSDIV)
+#define bfin_write_SPORT3_TFSDIV(val)		bfin_write16(SPORT3_TFSDIV, val)
+#define bfin_read_SPORT3_TX()			bfin_read32(SPORT3_TX)
+#define bfin_write_SPORT3_TX(val)		bfin_write32(SPORT3_TX, val)
+#define bfin_read_SPORT3_RX()			bfin_read32(SPORT3_RX)
+#define bfin_write_SPORT3_RX(val)		bfin_write32(SPORT3_RX, val)
+#define bfin_read_SPORT3_RCR1()			bfin_read16(SPORT3_RCR1)
+#define bfin_write_SPORT3_RCR1(val)		bfin_write16(SPORT3_RCR1, val)
+#define bfin_read_SPORT3_RCR2()			bfin_read16(SPORT3_RCR2)
+#define bfin_write_SPORT3_RCR2(val)		bfin_write16(SPORT3_RCR2, val)
+#define bfin_read_SPORT3_RCLKDIV()		bfin_read16(SPORT3_RCLKDIV)
+#define bfin_write_SPORT3_RCLKDIV(val)		bfin_write16(SPORT3_RCLKDIV, val)
+#define bfin_read_SPORT3_RFSDIV()		bfin_read16(SPORT3_RFSDIV)
+#define bfin_write_SPORT3_RFSDIV(val)		bfin_write16(SPORT3_RFSDIV, val)
+#define bfin_read_SPORT3_STAT()			bfin_read16(SPORT3_STAT)
+#define bfin_write_SPORT3_STAT(val)		bfin_write16(SPORT3_STAT, val)
+#define bfin_read_SPORT3_CHNL()			bfin_read16(SPORT3_CHNL)
+#define bfin_write_SPORT3_CHNL(val)		bfin_write16(SPORT3_CHNL, val)
+#define bfin_read_SPORT3_MCMC1()		bfin_read16(SPORT3_MCMC1)
+#define bfin_write_SPORT3_MCMC1(val)		bfin_write16(SPORT3_MCMC1, val)
+#define bfin_read_SPORT3_MCMC2()		bfin_read16(SPORT3_MCMC2)
+#define bfin_write_SPORT3_MCMC2(val)		bfin_write16(SPORT3_MCMC2, val)
+#define bfin_read_SPORT3_MTCS0()		bfin_read32(SPORT3_MTCS0)
+#define bfin_write_SPORT3_MTCS0(val)		bfin_write32(SPORT3_MTCS0, val)
+#define bfin_read_SPORT3_MTCS1()		bfin_read32(SPORT3_MTCS1)
+#define bfin_write_SPORT3_MTCS1(val)		bfin_write32(SPORT3_MTCS1, val)
+#define bfin_read_SPORT3_MTCS2()		bfin_read32(SPORT3_MTCS2)
+#define bfin_write_SPORT3_MTCS2(val)		bfin_write32(SPORT3_MTCS2, val)
+#define bfin_read_SPORT3_MTCS3()		bfin_read32(SPORT3_MTCS3)
+#define bfin_write_SPORT3_MTCS3(val)		bfin_write32(SPORT3_MTCS3, val)
+#define bfin_read_SPORT3_MRCS0()		bfin_read32(SPORT3_MRCS0)
+#define bfin_write_SPORT3_MRCS0(val)		bfin_write32(SPORT3_MRCS0, val)
+#define bfin_read_SPORT3_MRCS1()		bfin_read32(SPORT3_MRCS1)
+#define bfin_write_SPORT3_MRCS1(val)		bfin_write32(SPORT3_MRCS1, val)
+#define bfin_read_SPORT3_MRCS2()		bfin_read32(SPORT3_MRCS2)
+#define bfin_write_SPORT3_MRCS2(val)		bfin_write32(SPORT3_MRCS2, val)
+#define bfin_read_SPORT3_MRCS3()		bfin_read32(SPORT3_MRCS3)
+#define bfin_write_SPORT3_MRCS3(val)		bfin_write32(SPORT3_MRCS3, val)
+
+/* EPPI2 Registers */
+
+#define bfin_read_EPPI2_STATUS()		bfin_read16(EPPI2_STATUS)
+#define bfin_write_EPPI2_STATUS(val)		bfin_write16(EPPI2_STATUS, val)
+#define bfin_read_EPPI2_HCOUNT()		bfin_read16(EPPI2_HCOUNT)
+#define bfin_write_EPPI2_HCOUNT(val)		bfin_write16(EPPI2_HCOUNT, val)
+#define bfin_read_EPPI2_HDELAY()		bfin_read16(EPPI2_HDELAY)
+#define bfin_write_EPPI2_HDELAY(val)		bfin_write16(EPPI2_HDELAY, val)
+#define bfin_read_EPPI2_VCOUNT()		bfin_read16(EPPI2_VCOUNT)
+#define bfin_write_EPPI2_VCOUNT(val)		bfin_write16(EPPI2_VCOUNT, val)
+#define bfin_read_EPPI2_VDELAY()		bfin_read16(EPPI2_VDELAY)
+#define bfin_write_EPPI2_VDELAY(val)		bfin_write16(EPPI2_VDELAY, val)
+#define bfin_read_EPPI2_FRAME()			bfin_read16(EPPI2_FRAME)
+#define bfin_write_EPPI2_FRAME(val)		bfin_write16(EPPI2_FRAME, val)
+#define bfin_read_EPPI2_LINE()			bfin_read16(EPPI2_LINE)
+#define bfin_write_EPPI2_LINE(val)		bfin_write16(EPPI2_LINE, val)
+#define bfin_read_EPPI2_CLKDIV()		bfin_read16(EPPI2_CLKDIV)
+#define bfin_write_EPPI2_CLKDIV(val)		bfin_write16(EPPI2_CLKDIV, val)
+#define bfin_read_EPPI2_CONTROL()		bfin_read32(EPPI2_CONTROL)
+#define bfin_write_EPPI2_CONTROL(val)		bfin_write32(EPPI2_CONTROL, val)
+#define bfin_read_EPPI2_FS1W_HBL()		bfin_read32(EPPI2_FS1W_HBL)
+#define bfin_write_EPPI2_FS1W_HBL(val)		bfin_write32(EPPI2_FS1W_HBL, val)
+#define bfin_read_EPPI2_FS1P_AVPL()		bfin_read32(EPPI2_FS1P_AVPL)
+#define bfin_write_EPPI2_FS1P_AVPL(val)		bfin_write32(EPPI2_FS1P_AVPL, val)
+#define bfin_read_EPPI2_FS2W_LVB()		bfin_read32(EPPI2_FS2W_LVB)
+#define bfin_write_EPPI2_FS2W_LVB(val)		bfin_write32(EPPI2_FS2W_LVB, val)
+#define bfin_read_EPPI2_FS2P_LAVF()		bfin_read32(EPPI2_FS2P_LAVF)
+#define bfin_write_EPPI2_FS2P_LAVF(val)		bfin_write32(EPPI2_FS2P_LAVF, val)
+#define bfin_read_EPPI2_CLIP()			bfin_read32(EPPI2_CLIP)
+#define bfin_write_EPPI2_CLIP(val)		bfin_write32(EPPI2_CLIP, val)
+
+/* CAN Controller 0 Config 1 Registers */
+
+#define bfin_read_CAN0_MC1()		bfin_read16(CAN0_MC1)
+#define bfin_write_CAN0_MC1(val)	bfin_write16(CAN0_MC1, val)
+#define bfin_read_CAN0_MD1()		bfin_read16(CAN0_MD1)
+#define bfin_write_CAN0_MD1(val)	bfin_write16(CAN0_MD1, val)
+#define bfin_read_CAN0_TRS1()		bfin_read16(CAN0_TRS1)
+#define bfin_write_CAN0_TRS1(val)	bfin_write16(CAN0_TRS1, val)
+#define bfin_read_CAN0_TRR1()		bfin_read16(CAN0_TRR1)
+#define bfin_write_CAN0_TRR1(val)	bfin_write16(CAN0_TRR1, val)
+#define bfin_read_CAN0_TA1()		bfin_read16(CAN0_TA1)
+#define bfin_write_CAN0_TA1(val)	bfin_write16(CAN0_TA1, val)
+#define bfin_read_CAN0_AA1()		bfin_read16(CAN0_AA1)
+#define bfin_write_CAN0_AA1(val)	bfin_write16(CAN0_AA1, val)
+#define bfin_read_CAN0_RMP1()		bfin_read16(CAN0_RMP1)
+#define bfin_write_CAN0_RMP1(val)	bfin_write16(CAN0_RMP1, val)
+#define bfin_read_CAN0_RML1()		bfin_read16(CAN0_RML1)
+#define bfin_write_CAN0_RML1(val)	bfin_write16(CAN0_RML1, val)
+#define bfin_read_CAN0_MBTIF1()		bfin_read16(CAN0_MBTIF1)
+#define bfin_write_CAN0_MBTIF1(val)	bfin_write16(CAN0_MBTIF1, val)
+#define bfin_read_CAN0_MBRIF1()		bfin_read16(CAN0_MBRIF1)
+#define bfin_write_CAN0_MBRIF1(val)	bfin_write16(CAN0_MBRIF1, val)
+#define bfin_read_CAN0_MBIM1()		bfin_read16(CAN0_MBIM1)
+#define bfin_write_CAN0_MBIM1(val)	bfin_write16(CAN0_MBIM1, val)
+#define bfin_read_CAN0_RFH1()		bfin_read16(CAN0_RFH1)
+#define bfin_write_CAN0_RFH1(val)	bfin_write16(CAN0_RFH1, val)
+#define bfin_read_CAN0_OPSS1()		bfin_read16(CAN0_OPSS1)
+#define bfin_write_CAN0_OPSS1(val)	bfin_write16(CAN0_OPSS1, val)
+
+/* CAN Controller 0 Config 2 Registers */
+
+#define bfin_read_CAN0_MC2()		bfin_read16(CAN0_MC2)
+#define bfin_write_CAN0_MC2(val)	bfin_write16(CAN0_MC2, val)
+#define bfin_read_CAN0_MD2()		bfin_read16(CAN0_MD2)
+#define bfin_write_CAN0_MD2(val)	bfin_write16(CAN0_MD2, val)
+#define bfin_read_CAN0_TRS2()		bfin_read16(CAN0_TRS2)
+#define bfin_write_CAN0_TRS2(val)	bfin_write16(CAN0_TRS2, val)
+#define bfin_read_CAN0_TRR2()		bfin_read16(CAN0_TRR2)
+#define bfin_write_CAN0_TRR2(val)	bfin_write16(CAN0_TRR2, val)
+#define bfin_read_CAN0_TA2()		bfin_read16(CAN0_TA2)
+#define bfin_write_CAN0_TA2(val)	bfin_write16(CAN0_TA2, val)
+#define bfin_read_CAN0_AA2()		bfin_read16(CAN0_AA2)
+#define bfin_write_CAN0_AA2(val)	bfin_write16(CAN0_AA2, val)
+#define bfin_read_CAN0_RMP2()		bfin_read16(CAN0_RMP2)
+#define bfin_write_CAN0_RMP2(val)	bfin_write16(CAN0_RMP2, val)
+#define bfin_read_CAN0_RML2()		bfin_read16(CAN0_RML2)
+#define bfin_write_CAN0_RML2(val)	bfin_write16(CAN0_RML2, val)
+#define bfin_read_CAN0_MBTIF2()		bfin_read16(CAN0_MBTIF2)
+#define bfin_write_CAN0_MBTIF2(val)	bfin_write16(CAN0_MBTIF2, val)
+#define bfin_read_CAN0_MBRIF2()		bfin_read16(CAN0_MBRIF2)
+#define bfin_write_CAN0_MBRIF2(val)	bfin_write16(CAN0_MBRIF2, val)
+#define bfin_read_CAN0_MBIM2()		bfin_read16(CAN0_MBIM2)
+#define bfin_write_CAN0_MBIM2(val)	bfin_write16(CAN0_MBIM2, val)
+#define bfin_read_CAN0_RFH2()		bfin_read16(CAN0_RFH2)
+#define bfin_write_CAN0_RFH2(val)	bfin_write16(CAN0_RFH2, val)
+#define bfin_read_CAN0_OPSS2()		bfin_read16(CAN0_OPSS2)
+#define bfin_write_CAN0_OPSS2(val)	bfin_write16(CAN0_OPSS2, val)
+
+/* CAN Controller 0 Clock/Interrubfin_read_()t/Counter Registers */
+
+#define bfin_read_CAN0_CLOCK()		bfin_read16(CAN0_CLOCK)
+#define bfin_write_CAN0_CLOCK(val)	bfin_write16(CAN0_CLOCK, val)
+#define bfin_read_CAN0_TIMING()		bfin_read16(CAN0_TIMING)
+#define bfin_write_CAN0_TIMING(val)	bfin_write16(CAN0_TIMING, val)
+#define bfin_read_CAN0_DEBUG()		bfin_read16(CAN0_DEBUG)
+#define bfin_write_CAN0_DEBUG(val)	bfin_write16(CAN0_DEBUG, val)
+#define bfin_read_CAN0_STATUS()		bfin_read16(CAN0_STATUS)
+#define bfin_write_CAN0_STATUS(val)	bfin_write16(CAN0_STATUS, val)
+#define bfin_read_CAN0_CEC()		bfin_read16(CAN0_CEC)
+#define bfin_write_CAN0_CEC(val)	bfin_write16(CAN0_CEC, val)
+#define bfin_read_CAN0_GIS()		bfin_read16(CAN0_GIS)
+#define bfin_write_CAN0_GIS(val)	bfin_write16(CAN0_GIS, val)
+#define bfin_read_CAN0_GIM()		bfin_read16(CAN0_GIM)
+#define bfin_write_CAN0_GIM(val)	bfin_write16(CAN0_GIM, val)
+#define bfin_read_CAN0_GIF()		bfin_read16(CAN0_GIF)
+#define bfin_write_CAN0_GIF(val)	bfin_write16(CAN0_GIF, val)
+#define bfin_read_CAN0_CONTROL()	bfin_read16(CAN0_CONTROL)
+#define bfin_write_CAN0_CONTROL(val)	bfin_write16(CAN0_CONTROL, val)
+#define bfin_read_CAN0_INTR()		bfin_read16(CAN0_INTR)
+#define bfin_write_CAN0_INTR(val)	bfin_write16(CAN0_INTR, val)
+#define bfin_read_CAN0_MBTD()		bfin_read16(CAN0_MBTD)
+#define bfin_write_CAN0_MBTD(val)	bfin_write16(CAN0_MBTD, val)
+#define bfin_read_CAN0_EWR()		bfin_read16(CAN0_EWR)
+#define bfin_write_CAN0_EWR(val)	bfin_write16(CAN0_EWR, val)
+#define bfin_read_CAN0_ESR()		bfin_read16(CAN0_ESR)
+#define bfin_write_CAN0_ESR(val)	bfin_write16(CAN0_ESR, val)
+#define bfin_read_CAN0_UCCNT()		bfin_read16(CAN0_UCCNT)
+#define bfin_write_CAN0_UCCNT(val)	bfin_write16(CAN0_UCCNT, val)
+#define bfin_read_CAN0_UCRC()		bfin_read16(CAN0_UCRC)
+#define bfin_write_CAN0_UCRC(val)	bfin_write16(CAN0_UCRC, val)
+#define bfin_read_CAN0_UCCNF()		bfin_read16(CAN0_UCCNF)
+#define bfin_write_CAN0_UCCNF(val)	bfin_write16(CAN0_UCCNF, val)
+
+/* CAN Controller 0 Accebfin_read_()tance Registers */
+
+#define bfin_read_CAN0_AM00L()		bfin_read16(CAN0_AM00L)
+#define bfin_write_CAN0_AM00L(val)	bfin_write16(CAN0_AM00L, val)
+#define bfin_read_CAN0_AM00H()		bfin_read16(CAN0_AM00H)
+#define bfin_write_CAN0_AM00H(val)	bfin_write16(CAN0_AM00H, val)
+#define bfin_read_CAN0_AM01L()		bfin_read16(CAN0_AM01L)
+#define bfin_write_CAN0_AM01L(val)	bfin_write16(CAN0_AM01L, val)
+#define bfin_read_CAN0_AM01H()		bfin_read16(CAN0_AM01H)
+#define bfin_write_CAN0_AM01H(val)	bfin_write16(CAN0_AM01H, val)
+#define bfin_read_CAN0_AM02L()		bfin_read16(CAN0_AM02L)
+#define bfin_write_CAN0_AM02L(val)	bfin_write16(CAN0_AM02L, val)
+#define bfin_read_CAN0_AM02H()		bfin_read16(CAN0_AM02H)
+#define bfin_write_CAN0_AM02H(val)	bfin_write16(CAN0_AM02H, val)
+#define bfin_read_CAN0_AM03L()		bfin_read16(CAN0_AM03L)
+#define bfin_write_CAN0_AM03L(val)	bfin_write16(CAN0_AM03L, val)
+#define bfin_read_CAN0_AM03H()		bfin_read16(CAN0_AM03H)
+#define bfin_write_CAN0_AM03H(val)	bfin_write16(CAN0_AM03H, val)
+#define bfin_read_CAN0_AM04L()		bfin_read16(CAN0_AM04L)
+#define bfin_write_CAN0_AM04L(val)	bfin_write16(CAN0_AM04L, val)
+#define bfin_read_CAN0_AM04H()		bfin_read16(CAN0_AM04H)
+#define bfin_write_CAN0_AM04H(val)	bfin_write16(CAN0_AM04H, val)
+#define bfin_read_CAN0_AM05L()		bfin_read16(CAN0_AM05L)
+#define bfin_write_CAN0_AM05L(val)	bfin_write16(CAN0_AM05L, val)
+#define bfin_read_CAN0_AM05H()		bfin_read16(CAN0_AM05H)
+#define bfin_write_CAN0_AM05H(val)	bfin_write16(CAN0_AM05H, val)
+#define bfin_read_CAN0_AM06L()		bfin_read16(CAN0_AM06L)
+#define bfin_write_CAN0_AM06L(val)	bfin_write16(CAN0_AM06L, val)
+#define bfin_read_CAN0_AM06H()		bfin_read16(CAN0_AM06H)
+#define bfin_write_CAN0_AM06H(val)	bfin_write16(CAN0_AM06H, val)
+#define bfin_read_CAN0_AM07L()		bfin_read16(CAN0_AM07L)
+#define bfin_write_CAN0_AM07L(val)	bfin_write16(CAN0_AM07L, val)
+#define bfin_read_CAN0_AM07H()		bfin_read16(CAN0_AM07H)
+#define bfin_write_CAN0_AM07H(val)	bfin_write16(CAN0_AM07H, val)
+#define bfin_read_CAN0_AM08L()		bfin_read16(CAN0_AM08L)
+#define bfin_write_CAN0_AM08L(val)	bfin_write16(CAN0_AM08L, val)
+#define bfin_read_CAN0_AM08H()		bfin_read16(CAN0_AM08H)
+#define bfin_write_CAN0_AM08H(val)	bfin_write16(CAN0_AM08H, val)
+#define bfin_read_CAN0_AM09L()		bfin_read16(CAN0_AM09L)
+#define bfin_write_CAN0_AM09L(val)	bfin_write16(CAN0_AM09L, val)
+#define bfin_read_CAN0_AM09H()		bfin_read16(CAN0_AM09H)
+#define bfin_write_CAN0_AM09H(val)	bfin_write16(CAN0_AM09H, val)
+#define bfin_read_CAN0_AM10L()		bfin_read16(CAN0_AM10L)
+#define bfin_write_CAN0_AM10L(val)	bfin_write16(CAN0_AM10L, val)
+#define bfin_read_CAN0_AM10H()		bfin_read16(CAN0_AM10H)
+#define bfin_write_CAN0_AM10H(val)	bfin_write16(CAN0_AM10H, val)
+#define bfin_read_CAN0_AM11L()		bfin_read16(CAN0_AM11L)
+#define bfin_write_CAN0_AM11L(val)	bfin_write16(CAN0_AM11L, val)
+#define bfin_read_CAN0_AM11H()		bfin_read16(CAN0_AM11H)
+#define bfin_write_CAN0_AM11H(val)	bfin_write16(CAN0_AM11H, val)
+#define bfin_read_CAN0_AM12L()		bfin_read16(CAN0_AM12L)
+#define bfin_write_CAN0_AM12L(val)	bfin_write16(CAN0_AM12L, val)
+#define bfin_read_CAN0_AM12H()		bfin_read16(CAN0_AM12H)
+#define bfin_write_CAN0_AM12H(val)	bfin_write16(CAN0_AM12H, val)
+#define bfin_read_CAN0_AM13L()		bfin_read16(CAN0_AM13L)
+#define bfin_write_CAN0_AM13L(val)	bfin_write16(CAN0_AM13L, val)
+#define bfin_read_CAN0_AM13H()		bfin_read16(CAN0_AM13H)
+#define bfin_write_CAN0_AM13H(val)	bfin_write16(CAN0_AM13H, val)
+#define bfin_read_CAN0_AM14L()		bfin_read16(CAN0_AM14L)
+#define bfin_write_CAN0_AM14L(val)	bfin_write16(CAN0_AM14L, val)
+#define bfin_read_CAN0_AM14H()		bfin_read16(CAN0_AM14H)
+#define bfin_write_CAN0_AM14H(val)	bfin_write16(CAN0_AM14H, val)
+#define bfin_read_CAN0_AM15L()		bfin_read16(CAN0_AM15L)
+#define bfin_write_CAN0_AM15L(val)	bfin_write16(CAN0_AM15L, val)
+#define bfin_read_CAN0_AM15H()		bfin_read16(CAN0_AM15H)
+#define bfin_write_CAN0_AM15H(val)	bfin_write16(CAN0_AM15H, val)
+
+/* CAN Controller 0 Accebfin_read_()tance Registers */
+
+#define bfin_read_CAN0_AM16L()		bfin_read16(CAN0_AM16L)
+#define bfin_write_CAN0_AM16L(val)	bfin_write16(CAN0_AM16L, val)
+#define bfin_read_CAN0_AM16H()		bfin_read16(CAN0_AM16H)
+#define bfin_write_CAN0_AM16H(val)	bfin_write16(CAN0_AM16H, val)
+#define bfin_read_CAN0_AM17L()		bfin_read16(CAN0_AM17L)
+#define bfin_write_CAN0_AM17L(val)	bfin_write16(CAN0_AM17L, val)
+#define bfin_read_CAN0_AM17H()		bfin_read16(CAN0_AM17H)
+#define bfin_write_CAN0_AM17H(val)	bfin_write16(CAN0_AM17H, val)
+#define bfin_read_CAN0_AM18L()		bfin_read16(CAN0_AM18L)
+#define bfin_write_CAN0_AM18L(val)	bfin_write16(CAN0_AM18L, val)
+#define bfin_read_CAN0_AM18H()		bfin_read16(CAN0_AM18H)
+#define bfin_write_CAN0_AM18H(val)	bfin_write16(CAN0_AM18H, val)
+#define bfin_read_CAN0_AM19L()		bfin_read16(CAN0_AM19L)
+#define bfin_write_CAN0_AM19L(val)	bfin_write16(CAN0_AM19L, val)
+#define bfin_read_CAN0_AM19H()		bfin_read16(CAN0_AM19H)
+#define bfin_write_CAN0_AM19H(val)	bfin_write16(CAN0_AM19H, val)
+#define bfin_read_CAN0_AM20L()		bfin_read16(CAN0_AM20L)
+#define bfin_write_CAN0_AM20L(val)	bfin_write16(CAN0_AM20L, val)
+#define bfin_read_CAN0_AM20H()		bfin_read16(CAN0_AM20H)
+#define bfin_write_CAN0_AM20H(val)	bfin_write16(CAN0_AM20H, val)
+#define bfin_read_CAN0_AM21L()		bfin_read16(CAN0_AM21L)
+#define bfin_write_CAN0_AM21L(val)	bfin_write16(CAN0_AM21L, val)
+#define bfin_read_CAN0_AM21H()		bfin_read16(CAN0_AM21H)
+#define bfin_write_CAN0_AM21H(val)	bfin_write16(CAN0_AM21H, val)
+#define bfin_read_CAN0_AM22L()		bfin_read16(CAN0_AM22L)
+#define bfin_write_CAN0_AM22L(val)	bfin_write16(CAN0_AM22L, val)
+#define bfin_read_CAN0_AM22H()		bfin_read16(CAN0_AM22H)
+#define bfin_write_CAN0_AM22H(val)	bfin_write16(CAN0_AM22H, val)
+#define bfin_read_CAN0_AM23L()		bfin_read16(CAN0_AM23L)
+#define bfin_write_CAN0_AM23L(val)	bfin_write16(CAN0_AM23L, val)
+#define bfin_read_CAN0_AM23H()		bfin_read16(CAN0_AM23H)
+#define bfin_write_CAN0_AM23H(val)	bfin_write16(CAN0_AM23H, val)
+#define bfin_read_CAN0_AM24L()		bfin_read16(CAN0_AM24L)
+#define bfin_write_CAN0_AM24L(val)	bfin_write16(CAN0_AM24L, val)
+#define bfin_read_CAN0_AM24H()		bfin_read16(CAN0_AM24H)
+#define bfin_write_CAN0_AM24H(val)	bfin_write16(CAN0_AM24H, val)
+#define bfin_read_CAN0_AM25L()		bfin_read16(CAN0_AM25L)
+#define bfin_write_CAN0_AM25L(val)	bfin_write16(CAN0_AM25L, val)
+#define bfin_read_CAN0_AM25H()		bfin_read16(CAN0_AM25H)
+#define bfin_write_CAN0_AM25H(val)	bfin_write16(CAN0_AM25H, val)
+#define bfin_read_CAN0_AM26L()		bfin_read16(CAN0_AM26L)
+#define bfin_write_CAN0_AM26L(val)	bfin_write16(CAN0_AM26L, val)
+#define bfin_read_CAN0_AM26H()		bfin_read16(CAN0_AM26H)
+#define bfin_write_CAN0_AM26H(val)	bfin_write16(CAN0_AM26H, val)
+#define bfin_read_CAN0_AM27L()		bfin_read16(CAN0_AM27L)
+#define bfin_write_CAN0_AM27L(val)	bfin_write16(CAN0_AM27L, val)
+#define bfin_read_CAN0_AM27H()		bfin_read16(CAN0_AM27H)
+#define bfin_write_CAN0_AM27H(val)	bfin_write16(CAN0_AM27H, val)
+#define bfin_read_CAN0_AM28L()		bfin_read16(CAN0_AM28L)
+#define bfin_write_CAN0_AM28L(val)	bfin_write16(CAN0_AM28L, val)
+#define bfin_read_CAN0_AM28H()		bfin_read16(CAN0_AM28H)
+#define bfin_write_CAN0_AM28H(val)	bfin_write16(CAN0_AM28H, val)
+#define bfin_read_CAN0_AM29L()		bfin_read16(CAN0_AM29L)
+#define bfin_write_CAN0_AM29L(val)	bfin_write16(CAN0_AM29L, val)
+#define bfin_read_CAN0_AM29H()		bfin_read16(CAN0_AM29H)
+#define bfin_write_CAN0_AM29H(val)	bfin_write16(CAN0_AM29H, val)
+#define bfin_read_CAN0_AM30L()		bfin_read16(CAN0_AM30L)
+#define bfin_write_CAN0_AM30L(val)	bfin_write16(CAN0_AM30L, val)
+#define bfin_read_CAN0_AM30H()		bfin_read16(CAN0_AM30H)
+#define bfin_write_CAN0_AM30H(val)	bfin_write16(CAN0_AM30H, val)
+#define bfin_read_CAN0_AM31L()		bfin_read16(CAN0_AM31L)
+#define bfin_write_CAN0_AM31L(val)	bfin_write16(CAN0_AM31L, val)
+#define bfin_read_CAN0_AM31H()		bfin_read16(CAN0_AM31H)
+#define bfin_write_CAN0_AM31H(val)	bfin_write16(CAN0_AM31H, val)
+
+/* CAN Controller 0 Mailbox Data Registers */
+
+#define bfin_read_CAN0_MB00_DATA0()		bfin_read16(CAN0_MB00_DATA0)
+#define bfin_write_CAN0_MB00_DATA0(val)		bfin_write16(CAN0_MB00_DATA0, val)
+#define bfin_read_CAN0_MB00_DATA1()		bfin_read16(CAN0_MB00_DATA1)
+#define bfin_write_CAN0_MB00_DATA1(val)		bfin_write16(CAN0_MB00_DATA1, val)
+#define bfin_read_CAN0_MB00_DATA2()		bfin_read16(CAN0_MB00_DATA2)
+#define bfin_write_CAN0_MB00_DATA2(val)		bfin_write16(CAN0_MB00_DATA2, val)
+#define bfin_read_CAN0_MB00_DATA3()		bfin_read16(CAN0_MB00_DATA3)
+#define bfin_write_CAN0_MB00_DATA3(val)		bfin_write16(CAN0_MB00_DATA3, val)
+#define bfin_read_CAN0_MB00_LENGTH()		bfin_read16(CAN0_MB00_LENGTH)
+#define bfin_write_CAN0_MB00_LENGTH(val)	bfin_write16(CAN0_MB00_LENGTH, val)
+#define bfin_read_CAN0_MB00_TIMESTAMP()		bfin_read16(CAN0_MB00_TIMESTAMP)
+#define bfin_write_CAN0_MB00_TIMESTAMP(val)	bfin_write16(CAN0_MB00_TIMESTAMP, val)
+#define bfin_read_CAN0_MB00_ID0()		bfin_read16(CAN0_MB00_ID0)
+#define bfin_write_CAN0_MB00_ID0(val)		bfin_write16(CAN0_MB00_ID0, val)
+#define bfin_read_CAN0_MB00_ID1()		bfin_read16(CAN0_MB00_ID1)
+#define bfin_write_CAN0_MB00_ID1(val)		bfin_write16(CAN0_MB00_ID1, val)
+#define bfin_read_CAN0_MB01_DATA0()		bfin_read16(CAN0_MB01_DATA0)
+#define bfin_write_CAN0_MB01_DATA0(val)		bfin_write16(CAN0_MB01_DATA0, val)
+#define bfin_read_CAN0_MB01_DATA1()		bfin_read16(CAN0_MB01_DATA1)
+#define bfin_write_CAN0_MB01_DATA1(val)		bfin_write16(CAN0_MB01_DATA1, val)
+#define bfin_read_CAN0_MB01_DATA2()		bfin_read16(CAN0_MB01_DATA2)
+#define bfin_write_CAN0_MB01_DATA2(val)		bfin_write16(CAN0_MB01_DATA2, val)
+#define bfin_read_CAN0_MB01_DATA3()		bfin_read16(CAN0_MB01_DATA3)
+#define bfin_write_CAN0_MB01_DATA3(val)		bfin_write16(CAN0_MB01_DATA3, val)
+#define bfin_read_CAN0_MB01_LENGTH()		bfin_read16(CAN0_MB01_LENGTH)
+#define bfin_write_CAN0_MB01_LENGTH(val)	bfin_write16(CAN0_MB01_LENGTH, val)
+#define bfin_read_CAN0_MB01_TIMESTAMP()		bfin_read16(CAN0_MB01_TIMESTAMP)
+#define bfin_write_CAN0_MB01_TIMESTAMP(val)	bfin_write16(CAN0_MB01_TIMESTAMP, val)
+#define bfin_read_CAN0_MB01_ID0()		bfin_read16(CAN0_MB01_ID0)
+#define bfin_write_CAN0_MB01_ID0(val)		bfin_write16(CAN0_MB01_ID0, val)
+#define bfin_read_CAN0_MB01_ID1()		bfin_read16(CAN0_MB01_ID1)
+#define bfin_write_CAN0_MB01_ID1(val)		bfin_write16(CAN0_MB01_ID1, val)
+#define bfin_read_CAN0_MB02_DATA0()		bfin_read16(CAN0_MB02_DATA0)
+#define bfin_write_CAN0_MB02_DATA0(val)		bfin_write16(CAN0_MB02_DATA0, val)
+#define bfin_read_CAN0_MB02_DATA1()		bfin_read16(CAN0_MB02_DATA1)
+#define bfin_write_CAN0_MB02_DATA1(val)		bfin_write16(CAN0_MB02_DATA1, val)
+#define bfin_read_CAN0_MB02_DATA2()		bfin_read16(CAN0_MB02_DATA2)
+#define bfin_write_CAN0_MB02_DATA2(val)		bfin_write16(CAN0_MB02_DATA2, val)
+#define bfin_read_CAN0_MB02_DATA3()		bfin_read16(CAN0_MB02_DATA3)
+#define bfin_write_CAN0_MB02_DATA3(val)		bfin_write16(CAN0_MB02_DATA3, val)
+#define bfin_read_CAN0_MB02_LENGTH()		bfin_read16(CAN0_MB02_LENGTH)
+#define bfin_write_CAN0_MB02_LENGTH(val)	bfin_write16(CAN0_MB02_LENGTH, val)
+#define bfin_read_CAN0_MB02_TIMESTAMP()		bfin_read16(CAN0_MB02_TIMESTAMP)
+#define bfin_write_CAN0_MB02_TIMESTAMP(val)	bfin_write16(CAN0_MB02_TIMESTAMP, val)
+#define bfin_read_CAN0_MB02_ID0()		bfin_read16(CAN0_MB02_ID0)
+#define bfin_write_CAN0_MB02_ID0(val)		bfin_write16(CAN0_MB02_ID0, val)
+#define bfin_read_CAN0_MB02_ID1()		bfin_read16(CAN0_MB02_ID1)
+#define bfin_write_CAN0_MB02_ID1(val)		bfin_write16(CAN0_MB02_ID1, val)
+#define bfin_read_CAN0_MB03_DATA0()		bfin_read16(CAN0_MB03_DATA0)
+#define bfin_write_CAN0_MB03_DATA0(val)		bfin_write16(CAN0_MB03_DATA0, val)
+#define bfin_read_CAN0_MB03_DATA1()		bfin_read16(CAN0_MB03_DATA1)
+#define bfin_write_CAN0_MB03_DATA1(val)		bfin_write16(CAN0_MB03_DATA1, val)
+#define bfin_read_CAN0_MB03_DATA2()		bfin_read16(CAN0_MB03_DATA2)
+#define bfin_write_CAN0_MB03_DATA2(val)		bfin_write16(CAN0_MB03_DATA2, val)
+#define bfin_read_CAN0_MB03_DATA3()		bfin_read16(CAN0_MB03_DATA3)
+#define bfin_write_CAN0_MB03_DATA3(val)		bfin_write16(CAN0_MB03_DATA3, val)
+#define bfin_read_CAN0_MB03_LENGTH()		bfin_read16(CAN0_MB03_LENGTH)
+#define bfin_write_CAN0_MB03_LENGTH(val)	bfin_write16(CAN0_MB03_LENGTH, val)
+#define bfin_read_CAN0_MB03_TIMESTAMP()		bfin_read16(CAN0_MB03_TIMESTAMP)
+#define bfin_write_CAN0_MB03_TIMESTAMP(val)	bfin_write16(CAN0_MB03_TIMESTAMP, val)
+#define bfin_read_CAN0_MB03_ID0()		bfin_read16(CAN0_MB03_ID0)
+#define bfin_write_CAN0_MB03_ID0(val)		bfin_write16(CAN0_MB03_ID0, val)
+#define bfin_read_CAN0_MB03_ID1()		bfin_read16(CAN0_MB03_ID1)
+#define bfin_write_CAN0_MB03_ID1(val)		bfin_write16(CAN0_MB03_ID1, val)
+#define bfin_read_CAN0_MB04_DATA0()		bfin_read16(CAN0_MB04_DATA0)
+#define bfin_write_CAN0_MB04_DATA0(val)		bfin_write16(CAN0_MB04_DATA0, val)
+#define bfin_read_CAN0_MB04_DATA1()		bfin_read16(CAN0_MB04_DATA1)
+#define bfin_write_CAN0_MB04_DATA1(val)		bfin_write16(CAN0_MB04_DATA1, val)
+#define bfin_read_CAN0_MB04_DATA2()		bfin_read16(CAN0_MB04_DATA2)
+#define bfin_write_CAN0_MB04_DATA2(val)		bfin_write16(CAN0_MB04_DATA2, val)
+#define bfin_read_CAN0_MB04_DATA3()		bfin_read16(CAN0_MB04_DATA3)
+#define bfin_write_CAN0_MB04_DATA3(val)		bfin_write16(CAN0_MB04_DATA3, val)
+#define bfin_read_CAN0_MB04_LENGTH()		bfin_read16(CAN0_MB04_LENGTH)
+#define bfin_write_CAN0_MB04_LENGTH(val)	bfin_write16(CAN0_MB04_LENGTH, val)
+#define bfin_read_CAN0_MB04_TIMESTAMP()		bfin_read16(CAN0_MB04_TIMESTAMP)
+#define bfin_write_CAN0_MB04_TIMESTAMP(val)	bfin_write16(CAN0_MB04_TIMESTAMP, val)
+#define bfin_read_CAN0_MB04_ID0()		bfin_read16(CAN0_MB04_ID0)
+#define bfin_write_CAN0_MB04_ID0(val)		bfin_write16(CAN0_MB04_ID0, val)
+#define bfin_read_CAN0_MB04_ID1()		bfin_read16(CAN0_MB04_ID1)
+#define bfin_write_CAN0_MB04_ID1(val)		bfin_write16(CAN0_MB04_ID1, val)
+#define bfin_read_CAN0_MB05_DATA0()		bfin_read16(CAN0_MB05_DATA0)
+#define bfin_write_CAN0_MB05_DATA0(val)		bfin_write16(CAN0_MB05_DATA0, val)
+#define bfin_read_CAN0_MB05_DATA1()		bfin_read16(CAN0_MB05_DATA1)
+#define bfin_write_CAN0_MB05_DATA1(val)		bfin_write16(CAN0_MB05_DATA1, val)
+#define bfin_read_CAN0_MB05_DATA2()		bfin_read16(CAN0_MB05_DATA2)
+#define bfin_write_CAN0_MB05_DATA2(val)		bfin_write16(CAN0_MB05_DATA2, val)
+#define bfin_read_CAN0_MB05_DATA3()		bfin_read16(CAN0_MB05_DATA3)
+#define bfin_write_CAN0_MB05_DATA3(val)		bfin_write16(CAN0_MB05_DATA3, val)
+#define bfin_read_CAN0_MB05_LENGTH()		bfin_read16(CAN0_MB05_LENGTH)
+#define bfin_write_CAN0_MB05_LENGTH(val)	bfin_write16(CAN0_MB05_LENGTH, val)
+#define bfin_read_CAN0_MB05_TIMESTAMP()		bfin_read16(CAN0_MB05_TIMESTAMP)
+#define bfin_write_CAN0_MB05_TIMESTAMP(val)	bfin_write16(CAN0_MB05_TIMESTAMP, val)
+#define bfin_read_CAN0_MB05_ID0()		bfin_read16(CAN0_MB05_ID0)
+#define bfin_write_CAN0_MB05_ID0(val)		bfin_write16(CAN0_MB05_ID0, val)
+#define bfin_read_CAN0_MB05_ID1()		bfin_read16(CAN0_MB05_ID1)
+#define bfin_write_CAN0_MB05_ID1(val)		bfin_write16(CAN0_MB05_ID1, val)
+#define bfin_read_CAN0_MB06_DATA0()		bfin_read16(CAN0_MB06_DATA0)
+#define bfin_write_CAN0_MB06_DATA0(val)		bfin_write16(CAN0_MB06_DATA0, val)
+#define bfin_read_CAN0_MB06_DATA1()		bfin_read16(CAN0_MB06_DATA1)
+#define bfin_write_CAN0_MB06_DATA1(val)		bfin_write16(CAN0_MB06_DATA1, val)
+#define bfin_read_CAN0_MB06_DATA2()		bfin_read16(CAN0_MB06_DATA2)
+#define bfin_write_CAN0_MB06_DATA2(val)		bfin_write16(CAN0_MB06_DATA2, val)
+#define bfin_read_CAN0_MB06_DATA3()		bfin_read16(CAN0_MB06_DATA3)
+#define bfin_write_CAN0_MB06_DATA3(val)		bfin_write16(CAN0_MB06_DATA3, val)
+#define bfin_read_CAN0_MB06_LENGTH()		bfin_read16(CAN0_MB06_LENGTH)
+#define bfin_write_CAN0_MB06_LENGTH(val)	bfin_write16(CAN0_MB06_LENGTH, val)
+#define bfin_read_CAN0_MB06_TIMESTAMP()		bfin_read16(CAN0_MB06_TIMESTAMP)
+#define bfin_write_CAN0_MB06_TIMESTAMP(val)	bfin_write16(CAN0_MB06_TIMESTAMP, val)
+#define bfin_read_CAN0_MB06_ID0()		bfin_read16(CAN0_MB06_ID0)
+#define bfin_write_CAN0_MB06_ID0(val)		bfin_write16(CAN0_MB06_ID0, val)
+#define bfin_read_CAN0_MB06_ID1()		bfin_read16(CAN0_MB06_ID1)
+#define bfin_write_CAN0_MB06_ID1(val)		bfin_write16(CAN0_MB06_ID1, val)
+#define bfin_read_CAN0_MB07_DATA0()		bfin_read16(CAN0_MB07_DATA0)
+#define bfin_write_CAN0_MB07_DATA0(val)		bfin_write16(CAN0_MB07_DATA0, val)
+#define bfin_read_CAN0_MB07_DATA1()		bfin_read16(CAN0_MB07_DATA1)
+#define bfin_write_CAN0_MB07_DATA1(val)		bfin_write16(CAN0_MB07_DATA1, val)
+#define bfin_read_CAN0_MB07_DATA2()		bfin_read16(CAN0_MB07_DATA2)
+#define bfin_write_CAN0_MB07_DATA2(val)		bfin_write16(CAN0_MB07_DATA2, val)
+#define bfin_read_CAN0_MB07_DATA3()		bfin_read16(CAN0_MB07_DATA3)
+#define bfin_write_CAN0_MB07_DATA3(val)		bfin_write16(CAN0_MB07_DATA3, val)
+#define bfin_read_CAN0_MB07_LENGTH()		bfin_read16(CAN0_MB07_LENGTH)
+#define bfin_write_CAN0_MB07_LENGTH(val)	bfin_write16(CAN0_MB07_LENGTH, val)
+#define bfin_read_CAN0_MB07_TIMESTAMP()		bfin_read16(CAN0_MB07_TIMESTAMP)
+#define bfin_write_CAN0_MB07_TIMESTAMP(val)	bfin_write16(CAN0_MB07_TIMESTAMP, val)
+#define bfin_read_CAN0_MB07_ID0()		bfin_read16(CAN0_MB07_ID0)
+#define bfin_write_CAN0_MB07_ID0(val)		bfin_write16(CAN0_MB07_ID0, val)
+#define bfin_read_CAN0_MB07_ID1()		bfin_read16(CAN0_MB07_ID1)
+#define bfin_write_CAN0_MB07_ID1(val)		bfin_write16(CAN0_MB07_ID1, val)
+#define bfin_read_CAN0_MB08_DATA0()		bfin_read16(CAN0_MB08_DATA0)
+#define bfin_write_CAN0_MB08_DATA0(val)		bfin_write16(CAN0_MB08_DATA0, val)
+#define bfin_read_CAN0_MB08_DATA1()		bfin_read16(CAN0_MB08_DATA1)
+#define bfin_write_CAN0_MB08_DATA1(val)		bfin_write16(CAN0_MB08_DATA1, val)
+#define bfin_read_CAN0_MB08_DATA2()		bfin_read16(CAN0_MB08_DATA2)
+#define bfin_write_CAN0_MB08_DATA2(val)		bfin_write16(CAN0_MB08_DATA2, val)
+#define bfin_read_CAN0_MB08_DATA3()		bfin_read16(CAN0_MB08_DATA3)
+#define bfin_write_CAN0_MB08_DATA3(val)		bfin_write16(CAN0_MB08_DATA3, val)
+#define bfin_read_CAN0_MB08_LENGTH()		bfin_read16(CAN0_MB08_LENGTH)
+#define bfin_write_CAN0_MB08_LENGTH(val)	bfin_write16(CAN0_MB08_LENGTH, val)
+#define bfin_read_CAN0_MB08_TIMESTAMP()		bfin_read16(CAN0_MB08_TIMESTAMP)
+#define bfin_write_CAN0_MB08_TIMESTAMP(val)	bfin_write16(CAN0_MB08_TIMESTAMP, val)
+#define bfin_read_CAN0_MB08_ID0()		bfin_read16(CAN0_MB08_ID0)
+#define bfin_write_CAN0_MB08_ID0(val)		bfin_write16(CAN0_MB08_ID0, val)
+#define bfin_read_CAN0_MB08_ID1()		bfin_read16(CAN0_MB08_ID1)
+#define bfin_write_CAN0_MB08_ID1(val)		bfin_write16(CAN0_MB08_ID1, val)
+#define bfin_read_CAN0_MB09_DATA0()		bfin_read16(CAN0_MB09_DATA0)
+#define bfin_write_CAN0_MB09_DATA0(val)		bfin_write16(CAN0_MB09_DATA0, val)
+#define bfin_read_CAN0_MB09_DATA1()		bfin_read16(CAN0_MB09_DATA1)
+#define bfin_write_CAN0_MB09_DATA1(val)		bfin_write16(CAN0_MB09_DATA1, val)
+#define bfin_read_CAN0_MB09_DATA2()		bfin_read16(CAN0_MB09_DATA2)
+#define bfin_write_CAN0_MB09_DATA2(val)		bfin_write16(CAN0_MB09_DATA2, val)
+#define bfin_read_CAN0_MB09_DATA3()		bfin_read16(CAN0_MB09_DATA3)
+#define bfin_write_CAN0_MB09_DATA3(val)		bfin_write16(CAN0_MB09_DATA3, val)
+#define bfin_read_CAN0_MB09_LENGTH()		bfin_read16(CAN0_MB09_LENGTH)
+#define bfin_write_CAN0_MB09_LENGTH(val)	bfin_write16(CAN0_MB09_LENGTH, val)
+#define bfin_read_CAN0_MB09_TIMESTAMP()		bfin_read16(CAN0_MB09_TIMESTAMP)
+#define bfin_write_CAN0_MB09_TIMESTAMP(val)	bfin_write16(CAN0_MB09_TIMESTAMP, val)
+#define bfin_read_CAN0_MB09_ID0()		bfin_read16(CAN0_MB09_ID0)
+#define bfin_write_CAN0_MB09_ID0(val)		bfin_write16(CAN0_MB09_ID0, val)
+#define bfin_read_CAN0_MB09_ID1()		bfin_read16(CAN0_MB09_ID1)
+#define bfin_write_CAN0_MB09_ID1(val)		bfin_write16(CAN0_MB09_ID1, val)
+#define bfin_read_CAN0_MB10_DATA0()		bfin_read16(CAN0_MB10_DATA0)
+#define bfin_write_CAN0_MB10_DATA0(val)		bfin_write16(CAN0_MB10_DATA0, val)
+#define bfin_read_CAN0_MB10_DATA1()		bfin_read16(CAN0_MB10_DATA1)
+#define bfin_write_CAN0_MB10_DATA1(val)		bfin_write16(CAN0_MB10_DATA1, val)
+#define bfin_read_CAN0_MB10_DATA2()		bfin_read16(CAN0_MB10_DATA2)
+#define bfin_write_CAN0_MB10_DATA2(val)		bfin_write16(CAN0_MB10_DATA2, val)
+#define bfin_read_CAN0_MB10_DATA3()		bfin_read16(CAN0_MB10_DATA3)
+#define bfin_write_CAN0_MB10_DATA3(val)		bfin_write16(CAN0_MB10_DATA3, val)
+#define bfin_read_CAN0_MB10_LENGTH()		bfin_read16(CAN0_MB10_LENGTH)
+#define bfin_write_CAN0_MB10_LENGTH(val)	bfin_write16(CAN0_MB10_LENGTH, val)
+#define bfin_read_CAN0_MB10_TIMESTAMP()		bfin_read16(CAN0_MB10_TIMESTAMP)
+#define bfin_write_CAN0_MB10_TIMESTAMP(val)	bfin_write16(CAN0_MB10_TIMESTAMP, val)
+#define bfin_read_CAN0_MB10_ID0()		bfin_read16(CAN0_MB10_ID0)
+#define bfin_write_CAN0_MB10_ID0(val)		bfin_write16(CAN0_MB10_ID0, val)
+#define bfin_read_CAN0_MB10_ID1()		bfin_read16(CAN0_MB10_ID1)
+#define bfin_write_CAN0_MB10_ID1(val)		bfin_write16(CAN0_MB10_ID1, val)
+#define bfin_read_CAN0_MB11_DATA0()		bfin_read16(CAN0_MB11_DATA0)
+#define bfin_write_CAN0_MB11_DATA0(val)		bfin_write16(CAN0_MB11_DATA0, val)
+#define bfin_read_CAN0_MB11_DATA1()		bfin_read16(CAN0_MB11_DATA1)
+#define bfin_write_CAN0_MB11_DATA1(val)		bfin_write16(CAN0_MB11_DATA1, val)
+#define bfin_read_CAN0_MB11_DATA2()		bfin_read16(CAN0_MB11_DATA2)
+#define bfin_write_CAN0_MB11_DATA2(val)		bfin_write16(CAN0_MB11_DATA2, val)
+#define bfin_read_CAN0_MB11_DATA3()		bfin_read16(CAN0_MB11_DATA3)
+#define bfin_write_CAN0_MB11_DATA3(val)		bfin_write16(CAN0_MB11_DATA3, val)
+#define bfin_read_CAN0_MB11_LENGTH()		bfin_read16(CAN0_MB11_LENGTH)
+#define bfin_write_CAN0_MB11_LENGTH(val)	bfin_write16(CAN0_MB11_LENGTH, val)
+#define bfin_read_CAN0_MB11_TIMESTAMP()		bfin_read16(CAN0_MB11_TIMESTAMP)
+#define bfin_write_CAN0_MB11_TIMESTAMP(val)	bfin_write16(CAN0_MB11_TIMESTAMP, val)
+#define bfin_read_CAN0_MB11_ID0()		bfin_read16(CAN0_MB11_ID0)
+#define bfin_write_CAN0_MB11_ID0(val)		bfin_write16(CAN0_MB11_ID0, val)
+#define bfin_read_CAN0_MB11_ID1()		bfin_read16(CAN0_MB11_ID1)
+#define bfin_write_CAN0_MB11_ID1(val)		bfin_write16(CAN0_MB11_ID1, val)
+#define bfin_read_CAN0_MB12_DATA0()		bfin_read16(CAN0_MB12_DATA0)
+#define bfin_write_CAN0_MB12_DATA0(val)		bfin_write16(CAN0_MB12_DATA0, val)
+#define bfin_read_CAN0_MB12_DATA1()		bfin_read16(CAN0_MB12_DATA1)
+#define bfin_write_CAN0_MB12_DATA1(val)		bfin_write16(CAN0_MB12_DATA1, val)
+#define bfin_read_CAN0_MB12_DATA2()		bfin_read16(CAN0_MB12_DATA2)
+#define bfin_write_CAN0_MB12_DATA2(val)		bfin_write16(CAN0_MB12_DATA2, val)
+#define bfin_read_CAN0_MB12_DATA3()		bfin_read16(CAN0_MB12_DATA3)
+#define bfin_write_CAN0_MB12_DATA3(val)		bfin_write16(CAN0_MB12_DATA3, val)
+#define bfin_read_CAN0_MB12_LENGTH()		bfin_read16(CAN0_MB12_LENGTH)
+#define bfin_write_CAN0_MB12_LENGTH(val)	bfin_write16(CAN0_MB12_LENGTH, val)
+#define bfin_read_CAN0_MB12_TIMESTAMP()		bfin_read16(CAN0_MB12_TIMESTAMP)
+#define bfin_write_CAN0_MB12_TIMESTAMP(val)	bfin_write16(CAN0_MB12_TIMESTAMP, val)
+#define bfin_read_CAN0_MB12_ID0()		bfin_read16(CAN0_MB12_ID0)
+#define bfin_write_CAN0_MB12_ID0(val)		bfin_write16(CAN0_MB12_ID0, val)
+#define bfin_read_CAN0_MB12_ID1()		bfin_read16(CAN0_MB12_ID1)
+#define bfin_write_CAN0_MB12_ID1(val)		bfin_write16(CAN0_MB12_ID1, val)
+#define bfin_read_CAN0_MB13_DATA0()		bfin_read16(CAN0_MB13_DATA0)
+#define bfin_write_CAN0_MB13_DATA0(val)		bfin_write16(CAN0_MB13_DATA0, val)
+#define bfin_read_CAN0_MB13_DATA1()		bfin_read16(CAN0_MB13_DATA1)
+#define bfin_write_CAN0_MB13_DATA1(val)		bfin_write16(CAN0_MB13_DATA1, val)
+#define bfin_read_CAN0_MB13_DATA2()		bfin_read16(CAN0_MB13_DATA2)
+#define bfin_write_CAN0_MB13_DATA2(val)		bfin_write16(CAN0_MB13_DATA2, val)
+#define bfin_read_CAN0_MB13_DATA3()		bfin_read16(CAN0_MB13_DATA3)
+#define bfin_write_CAN0_MB13_DATA3(val)		bfin_write16(CAN0_MB13_DATA3, val)
+#define bfin_read_CAN0_MB13_LENGTH()		bfin_read16(CAN0_MB13_LENGTH)
+#define bfin_write_CAN0_MB13_LENGTH(val)	bfin_write16(CAN0_MB13_LENGTH, val)
+#define bfin_read_CAN0_MB13_TIMESTAMP()		bfin_read16(CAN0_MB13_TIMESTAMP)
+#define bfin_write_CAN0_MB13_TIMESTAMP(val)	bfin_write16(CAN0_MB13_TIMESTAMP, val)
+#define bfin_read_CAN0_MB13_ID0()		bfin_read16(CAN0_MB13_ID0)
+#define bfin_write_CAN0_MB13_ID0(val)		bfin_write16(CAN0_MB13_ID0, val)
+#define bfin_read_CAN0_MB13_ID1()		bfin_read16(CAN0_MB13_ID1)
+#define bfin_write_CAN0_MB13_ID1(val)		bfin_write16(CAN0_MB13_ID1, val)
+#define bfin_read_CAN0_MB14_DATA0()		bfin_read16(CAN0_MB14_DATA0)
+#define bfin_write_CAN0_MB14_DATA0(val)		bfin_write16(CAN0_MB14_DATA0, val)
+#define bfin_read_CAN0_MB14_DATA1()		bfin_read16(CAN0_MB14_DATA1)
+#define bfin_write_CAN0_MB14_DATA1(val)		bfin_write16(CAN0_MB14_DATA1, val)
+#define bfin_read_CAN0_MB14_DATA2()		bfin_read16(CAN0_MB14_DATA2)
+#define bfin_write_CAN0_MB14_DATA2(val)		bfin_write16(CAN0_MB14_DATA2, val)
+#define bfin_read_CAN0_MB14_DATA3()		bfin_read16(CAN0_MB14_DATA3)
+#define bfin_write_CAN0_MB14_DATA3(val)		bfin_write16(CAN0_MB14_DATA3, val)
+#define bfin_read_CAN0_MB14_LENGTH()		bfin_read16(CAN0_MB14_LENGTH)
+#define bfin_write_CAN0_MB14_LENGTH(val)	bfin_write16(CAN0_MB14_LENGTH, val)
+#define bfin_read_CAN0_MB14_TIMESTAMP()		bfin_read16(CAN0_MB14_TIMESTAMP)
+#define bfin_write_CAN0_MB14_TIMESTAMP(val)	bfin_write16(CAN0_MB14_TIMESTAMP, val)
+#define bfin_read_CAN0_MB14_ID0()		bfin_read16(CAN0_MB14_ID0)
+#define bfin_write_CAN0_MB14_ID0(val)		bfin_write16(CAN0_MB14_ID0, val)
+#define bfin_read_CAN0_MB14_ID1()		bfin_read16(CAN0_MB14_ID1)
+#define bfin_write_CAN0_MB14_ID1(val)		bfin_write16(CAN0_MB14_ID1, val)
+#define bfin_read_CAN0_MB15_DATA0()		bfin_read16(CAN0_MB15_DATA0)
+#define bfin_write_CAN0_MB15_DATA0(val)		bfin_write16(CAN0_MB15_DATA0, val)
+#define bfin_read_CAN0_MB15_DATA1()		bfin_read16(CAN0_MB15_DATA1)
+#define bfin_write_CAN0_MB15_DATA1(val)		bfin_write16(CAN0_MB15_DATA1, val)
+#define bfin_read_CAN0_MB15_DATA2()		bfin_read16(CAN0_MB15_DATA2)
+#define bfin_write_CAN0_MB15_DATA2(val)		bfin_write16(CAN0_MB15_DATA2, val)
+#define bfin_read_CAN0_MB15_DATA3()		bfin_read16(CAN0_MB15_DATA3)
+#define bfin_write_CAN0_MB15_DATA3(val)		bfin_write16(CAN0_MB15_DATA3, val)
+#define bfin_read_CAN0_MB15_LENGTH()		bfin_read16(CAN0_MB15_LENGTH)
+#define bfin_write_CAN0_MB15_LENGTH(val)	bfin_write16(CAN0_MB15_LENGTH, val)
+#define bfin_read_CAN0_MB15_TIMESTAMP()		bfin_read16(CAN0_MB15_TIMESTAMP)
+#define bfin_write_CAN0_MB15_TIMESTAMP(val)	bfin_write16(CAN0_MB15_TIMESTAMP, val)
+#define bfin_read_CAN0_MB15_ID0()		bfin_read16(CAN0_MB15_ID0)
+#define bfin_write_CAN0_MB15_ID0(val)		bfin_write16(CAN0_MB15_ID0, val)
+#define bfin_read_CAN0_MB15_ID1()		bfin_read16(CAN0_MB15_ID1)
+#define bfin_write_CAN0_MB15_ID1(val)		bfin_write16(CAN0_MB15_ID1, val)
+
+/* CAN Controller 0 Mailbox Data Registers */
+
+#define bfin_read_CAN0_MB16_DATA0()		bfin_read16(CAN0_MB16_DATA0)
+#define bfin_write_CAN0_MB16_DATA0(val)		bfin_write16(CAN0_MB16_DATA0, val)
+#define bfin_read_CAN0_MB16_DATA1()		bfin_read16(CAN0_MB16_DATA1)
+#define bfin_write_CAN0_MB16_DATA1(val)		bfin_write16(CAN0_MB16_DATA1, val)
+#define bfin_read_CAN0_MB16_DATA2()		bfin_read16(CAN0_MB16_DATA2)
+#define bfin_write_CAN0_MB16_DATA2(val)		bfin_write16(CAN0_MB16_DATA2, val)
+#define bfin_read_CAN0_MB16_DATA3()		bfin_read16(CAN0_MB16_DATA3)
+#define bfin_write_CAN0_MB16_DATA3(val)		bfin_write16(CAN0_MB16_DATA3, val)
+#define bfin_read_CAN0_MB16_LENGTH()		bfin_read16(CAN0_MB16_LENGTH)
+#define bfin_write_CAN0_MB16_LENGTH(val)	bfin_write16(CAN0_MB16_LENGTH, val)
+#define bfin_read_CAN0_MB16_TIMESTAMP()		bfin_read16(CAN0_MB16_TIMESTAMP)
+#define bfin_write_CAN0_MB16_TIMESTAMP(val)	bfin_write16(CAN0_MB16_TIMESTAMP, val)
+#define bfin_read_CAN0_MB16_ID0()		bfin_read16(CAN0_MB16_ID0)
+#define bfin_write_CAN0_MB16_ID0(val)		bfin_write16(CAN0_MB16_ID0, val)
+#define bfin_read_CAN0_MB16_ID1()		bfin_read16(CAN0_MB16_ID1)
+#define bfin_write_CAN0_MB16_ID1(val)		bfin_write16(CAN0_MB16_ID1, val)
+#define bfin_read_CAN0_MB17_DATA0()		bfin_read16(CAN0_MB17_DATA0)
+#define bfin_write_CAN0_MB17_DATA0(val)		bfin_write16(CAN0_MB17_DATA0, val)
+#define bfin_read_CAN0_MB17_DATA1()		bfin_read16(CAN0_MB17_DATA1)
+#define bfin_write_CAN0_MB17_DATA1(val)		bfin_write16(CAN0_MB17_DATA1, val)
+#define bfin_read_CAN0_MB17_DATA2()		bfin_read16(CAN0_MB17_DATA2)
+#define bfin_write_CAN0_MB17_DATA2(val)		bfin_write16(CAN0_MB17_DATA2, val)
+#define bfin_read_CAN0_MB17_DATA3()		bfin_read16(CAN0_MB17_DATA3)
+#define bfin_write_CAN0_MB17_DATA3(val)		bfin_write16(CAN0_MB17_DATA3, val)
+#define bfin_read_CAN0_MB17_LENGTH()		bfin_read16(CAN0_MB17_LENGTH)
+#define bfin_write_CAN0_MB17_LENGTH(val)	bfin_write16(CAN0_MB17_LENGTH, val)
+#define bfin_read_CAN0_MB17_TIMESTAMP()		bfin_read16(CAN0_MB17_TIMESTAMP)
+#define bfin_write_CAN0_MB17_TIMESTAMP(val)	bfin_write16(CAN0_MB17_TIMESTAMP, val)
+#define bfin_read_CAN0_MB17_ID0()		bfin_read16(CAN0_MB17_ID0)
+#define bfin_write_CAN0_MB17_ID0(val)		bfin_write16(CAN0_MB17_ID0, val)
+#define bfin_read_CAN0_MB17_ID1()		bfin_read16(CAN0_MB17_ID1)
+#define bfin_write_CAN0_MB17_ID1(val)		bfin_write16(CAN0_MB17_ID1, val)
+#define bfin_read_CAN0_MB18_DATA0()		bfin_read16(CAN0_MB18_DATA0)
+#define bfin_write_CAN0_MB18_DATA0(val)		bfin_write16(CAN0_MB18_DATA0, val)
+#define bfin_read_CAN0_MB18_DATA1()		bfin_read16(CAN0_MB18_DATA1)
+#define bfin_write_CAN0_MB18_DATA1(val)		bfin_write16(CAN0_MB18_DATA1, val)
+#define bfin_read_CAN0_MB18_DATA2()		bfin_read16(CAN0_MB18_DATA2)
+#define bfin_write_CAN0_MB18_DATA2(val)		bfin_write16(CAN0_MB18_DATA2, val)
+#define bfin_read_CAN0_MB18_DATA3()		bfin_read16(CAN0_MB18_DATA3)
+#define bfin_write_CAN0_MB18_DATA3(val)		bfin_write16(CAN0_MB18_DATA3, val)
+#define bfin_read_CAN0_MB18_LENGTH()		bfin_read16(CAN0_MB18_LENGTH)
+#define bfin_write_CAN0_MB18_LENGTH(val)	bfin_write16(CAN0_MB18_LENGTH, val)
+#define bfin_read_CAN0_MB18_TIMESTAMP()		bfin_read16(CAN0_MB18_TIMESTAMP)
+#define bfin_write_CAN0_MB18_TIMESTAMP(val)	bfin_write16(CAN0_MB18_TIMESTAMP, val)
+#define bfin_read_CAN0_MB18_ID0()		bfin_read16(CAN0_MB18_ID0)
+#define bfin_write_CAN0_MB18_ID0(val)		bfin_write16(CAN0_MB18_ID0, val)
+#define bfin_read_CAN0_MB18_ID1()		bfin_read16(CAN0_MB18_ID1)
+#define bfin_write_CAN0_MB18_ID1(val)		bfin_write16(CAN0_MB18_ID1, val)
+#define bfin_read_CAN0_MB19_DATA0()		bfin_read16(CAN0_MB19_DATA0)
+#define bfin_write_CAN0_MB19_DATA0(val)		bfin_write16(CAN0_MB19_DATA0, val)
+#define bfin_read_CAN0_MB19_DATA1()		bfin_read16(CAN0_MB19_DATA1)
+#define bfin_write_CAN0_MB19_DATA1(val)		bfin_write16(CAN0_MB19_DATA1, val)
+#define bfin_read_CAN0_MB19_DATA2()		bfin_read16(CAN0_MB19_DATA2)
+#define bfin_write_CAN0_MB19_DATA2(val)		bfin_write16(CAN0_MB19_DATA2, val)
+#define bfin_read_CAN0_MB19_DATA3()		bfin_read16(CAN0_MB19_DATA3)
+#define bfin_write_CAN0_MB19_DATA3(val)		bfin_write16(CAN0_MB19_DATA3, val)
+#define bfin_read_CAN0_MB19_LENGTH()		bfin_read16(CAN0_MB19_LENGTH)
+#define bfin_write_CAN0_MB19_LENGTH(val)	bfin_write16(CAN0_MB19_LENGTH, val)
+#define bfin_read_CAN0_MB19_TIMESTAMP()		bfin_read16(CAN0_MB19_TIMESTAMP)
+#define bfin_write_CAN0_MB19_TIMESTAMP(val)	bfin_write16(CAN0_MB19_TIMESTAMP, val)
+#define bfin_read_CAN0_MB19_ID0()		bfin_read16(CAN0_MB19_ID0)
+#define bfin_write_CAN0_MB19_ID0(val)		bfin_write16(CAN0_MB19_ID0, val)
+#define bfin_read_CAN0_MB19_ID1()		bfin_read16(CAN0_MB19_ID1)
+#define bfin_write_CAN0_MB19_ID1(val)		bfin_write16(CAN0_MB19_ID1, val)
+#define bfin_read_CAN0_MB20_DATA0()		bfin_read16(CAN0_MB20_DATA0)
+#define bfin_write_CAN0_MB20_DATA0(val)		bfin_write16(CAN0_MB20_DATA0, val)
+#define bfin_read_CAN0_MB20_DATA1()		bfin_read16(CAN0_MB20_DATA1)
+#define bfin_write_CAN0_MB20_DATA1(val)		bfin_write16(CAN0_MB20_DATA1, val)
+#define bfin_read_CAN0_MB20_DATA2()		bfin_read16(CAN0_MB20_DATA2)
+#define bfin_write_CAN0_MB20_DATA2(val)		bfin_write16(CAN0_MB20_DATA2, val)
+#define bfin_read_CAN0_MB20_DATA3()		bfin_read16(CAN0_MB20_DATA3)
+#define bfin_write_CAN0_MB20_DATA3(val)		bfin_write16(CAN0_MB20_DATA3, val)
+#define bfin_read_CAN0_MB20_LENGTH()		bfin_read16(CAN0_MB20_LENGTH)
+#define bfin_write_CAN0_MB20_LENGTH(val)	bfin_write16(CAN0_MB20_LENGTH, val)
+#define bfin_read_CAN0_MB20_TIMESTAMP()		bfin_read16(CAN0_MB20_TIMESTAMP)
+#define bfin_write_CAN0_MB20_TIMESTAMP(val)	bfin_write16(CAN0_MB20_TIMESTAMP, val)
+#define bfin_read_CAN0_MB20_ID0()		bfin_read16(CAN0_MB20_ID0)
+#define bfin_write_CAN0_MB20_ID0(val)		bfin_write16(CAN0_MB20_ID0, val)
+#define bfin_read_CAN0_MB20_ID1()		bfin_read16(CAN0_MB20_ID1)
+#define bfin_write_CAN0_MB20_ID1(val)		bfin_write16(CAN0_MB20_ID1, val)
+#define bfin_read_CAN0_MB21_DATA0()		bfin_read16(CAN0_MB21_DATA0)
+#define bfin_write_CAN0_MB21_DATA0(val)		bfin_write16(CAN0_MB21_DATA0, val)
+#define bfin_read_CAN0_MB21_DATA1()		bfin_read16(CAN0_MB21_DATA1)
+#define bfin_write_CAN0_MB21_DATA1(val)		bfin_write16(CAN0_MB21_DATA1, val)
+#define bfin_read_CAN0_MB21_DATA2()		bfin_read16(CAN0_MB21_DATA2)
+#define bfin_write_CAN0_MB21_DATA2(val)		bfin_write16(CAN0_MB21_DATA2, val)
+#define bfin_read_CAN0_MB21_DATA3()		bfin_read16(CAN0_MB21_DATA3)
+#define bfin_write_CAN0_MB21_DATA3(val)		bfin_write16(CAN0_MB21_DATA3, val)
+#define bfin_read_CAN0_MB21_LENGTH()		bfin_read16(CAN0_MB21_LENGTH)
+#define bfin_write_CAN0_MB21_LENGTH(val)	bfin_write16(CAN0_MB21_LENGTH, val)
+#define bfin_read_CAN0_MB21_TIMESTAMP()		bfin_read16(CAN0_MB21_TIMESTAMP)
+#define bfin_write_CAN0_MB21_TIMESTAMP(val)	bfin_write16(CAN0_MB21_TIMESTAMP, val)
+#define bfin_read_CAN0_MB21_ID0()		bfin_read16(CAN0_MB21_ID0)
+#define bfin_write_CAN0_MB21_ID0(val)		bfin_write16(CAN0_MB21_ID0, val)
+#define bfin_read_CAN0_MB21_ID1()		bfin_read16(CAN0_MB21_ID1)
+#define bfin_write_CAN0_MB21_ID1(val)		bfin_write16(CAN0_MB21_ID1, val)
+#define bfin_read_CAN0_MB22_DATA0()		bfin_read16(CAN0_MB22_DATA0)
+#define bfin_write_CAN0_MB22_DATA0(val)		bfin_write16(CAN0_MB22_DATA0, val)
+#define bfin_read_CAN0_MB22_DATA1()		bfin_read16(CAN0_MB22_DATA1)
+#define bfin_write_CAN0_MB22_DATA1(val)		bfin_write16(CAN0_MB22_DATA1, val)
+#define bfin_read_CAN0_MB22_DATA2()		bfin_read16(CAN0_MB22_DATA2)
+#define bfin_write_CAN0_MB22_DATA2(val)		bfin_write16(CAN0_MB22_DATA2, val)
+#define bfin_read_CAN0_MB22_DATA3()		bfin_read16(CAN0_MB22_DATA3)
+#define bfin_write_CAN0_MB22_DATA3(val)		bfin_write16(CAN0_MB22_DATA3, val)
+#define bfin_read_CAN0_MB22_LENGTH()		bfin_read16(CAN0_MB22_LENGTH)
+#define bfin_write_CAN0_MB22_LENGTH(val)	bfin_write16(CAN0_MB22_LENGTH, val)
+#define bfin_read_CAN0_MB22_TIMESTAMP()		bfin_read16(CAN0_MB22_TIMESTAMP)
+#define bfin_write_CAN0_MB22_TIMESTAMP(val)	bfin_write16(CAN0_MB22_TIMESTAMP, val)
+#define bfin_read_CAN0_MB22_ID0()		bfin_read16(CAN0_MB22_ID0)
+#define bfin_write_CAN0_MB22_ID0(val)		bfin_write16(CAN0_MB22_ID0, val)
+#define bfin_read_CAN0_MB22_ID1()		bfin_read16(CAN0_MB22_ID1)
+#define bfin_write_CAN0_MB22_ID1(val)		bfin_write16(CAN0_MB22_ID1, val)
+#define bfin_read_CAN0_MB23_DATA0()		bfin_read16(CAN0_MB23_DATA0)
+#define bfin_write_CAN0_MB23_DATA0(val)		bfin_write16(CAN0_MB23_DATA0, val)
+#define bfin_read_CAN0_MB23_DATA1()		bfin_read16(CAN0_MB23_DATA1)
+#define bfin_write_CAN0_MB23_DATA1(val)		bfin_write16(CAN0_MB23_DATA1, val)
+#define bfin_read_CAN0_MB23_DATA2()		bfin_read16(CAN0_MB23_DATA2)
+#define bfin_write_CAN0_MB23_DATA2(val)		bfin_write16(CAN0_MB23_DATA2, val)
+#define bfin_read_CAN0_MB23_DATA3()		bfin_read16(CAN0_MB23_DATA3)
+#define bfin_write_CAN0_MB23_DATA3(val)		bfin_write16(CAN0_MB23_DATA3, val)
+#define bfin_read_CAN0_MB23_LENGTH()		bfin_read16(CAN0_MB23_LENGTH)
+#define bfin_write_CAN0_MB23_LENGTH(val)	bfin_write16(CAN0_MB23_LENGTH, val)
+#define bfin_read_CAN0_MB23_TIMESTAMP()		bfin_read16(CAN0_MB23_TIMESTAMP)
+#define bfin_write_CAN0_MB23_TIMESTAMP(val)	bfin_write16(CAN0_MB23_TIMESTAMP, val)
+#define bfin_read_CAN0_MB23_ID0()		bfin_read16(CAN0_MB23_ID0)
+#define bfin_write_CAN0_MB23_ID0(val)		bfin_write16(CAN0_MB23_ID0, val)
+#define bfin_read_CAN0_MB23_ID1()		bfin_read16(CAN0_MB23_ID1)
+#define bfin_write_CAN0_MB23_ID1(val)		bfin_write16(CAN0_MB23_ID1, val)
+#define bfin_read_CAN0_MB24_DATA0()		bfin_read16(CAN0_MB24_DATA0)
+#define bfin_write_CAN0_MB24_DATA0(val)		bfin_write16(CAN0_MB24_DATA0, val)
+#define bfin_read_CAN0_MB24_DATA1()		bfin_read16(CAN0_MB24_DATA1)
+#define bfin_write_CAN0_MB24_DATA1(val)		bfin_write16(CAN0_MB24_DATA1, val)
+#define bfin_read_CAN0_MB24_DATA2()		bfin_read16(CAN0_MB24_DATA2)
+#define bfin_write_CAN0_MB24_DATA2(val)		bfin_write16(CAN0_MB24_DATA2, val)
+#define bfin_read_CAN0_MB24_DATA3()		bfin_read16(CAN0_MB24_DATA3)
+#define bfin_write_CAN0_MB24_DATA3(val)		bfin_write16(CAN0_MB24_DATA3, val)
+#define bfin_read_CAN0_MB24_LENGTH()		bfin_read16(CAN0_MB24_LENGTH)
+#define bfin_write_CAN0_MB24_LENGTH(val)	bfin_write16(CAN0_MB24_LENGTH, val)
+#define bfin_read_CAN0_MB24_TIMESTAMP()		bfin_read16(CAN0_MB24_TIMESTAMP)
+#define bfin_write_CAN0_MB24_TIMESTAMP(val)	bfin_write16(CAN0_MB24_TIMESTAMP, val)
+#define bfin_read_CAN0_MB24_ID0()		bfin_read16(CAN0_MB24_ID0)
+#define bfin_write_CAN0_MB24_ID0(val)		bfin_write16(CAN0_MB24_ID0, val)
+#define bfin_read_CAN0_MB24_ID1()		bfin_read16(CAN0_MB24_ID1)
+#define bfin_write_CAN0_MB24_ID1(val)		bfin_write16(CAN0_MB24_ID1, val)
+#define bfin_read_CAN0_MB25_DATA0()		bfin_read16(CAN0_MB25_DATA0)
+#define bfin_write_CAN0_MB25_DATA0(val)		bfin_write16(CAN0_MB25_DATA0, val)
+#define bfin_read_CAN0_MB25_DATA1()		bfin_read16(CAN0_MB25_DATA1)
+#define bfin_write_CAN0_MB25_DATA1(val)		bfin_write16(CAN0_MB25_DATA1, val)
+#define bfin_read_CAN0_MB25_DATA2()		bfin_read16(CAN0_MB25_DATA2)
+#define bfin_write_CAN0_MB25_DATA2(val)		bfin_write16(CAN0_MB25_DATA2, val)
+#define bfin_read_CAN0_MB25_DATA3()		bfin_read16(CAN0_MB25_DATA3)
+#define bfin_write_CAN0_MB25_DATA3(val)		bfin_write16(CAN0_MB25_DATA3, val)
+#define bfin_read_CAN0_MB25_LENGTH()		bfin_read16(CAN0_MB25_LENGTH)
+#define bfin_write_CAN0_MB25_LENGTH(val)	bfin_write16(CAN0_MB25_LENGTH, val)
+#define bfin_read_CAN0_MB25_TIMESTAMP()		bfin_read16(CAN0_MB25_TIMESTAMP)
+#define bfin_write_CAN0_MB25_TIMESTAMP(val)	bfin_write16(CAN0_MB25_TIMESTAMP, val)
+#define bfin_read_CAN0_MB25_ID0()		bfin_read16(CAN0_MB25_ID0)
+#define bfin_write_CAN0_MB25_ID0(val)		bfin_write16(CAN0_MB25_ID0, val)
+#define bfin_read_CAN0_MB25_ID1()		bfin_read16(CAN0_MB25_ID1)
+#define bfin_write_CAN0_MB25_ID1(val)		bfin_write16(CAN0_MB25_ID1, val)
+#define bfin_read_CAN0_MB26_DATA0()		bfin_read16(CAN0_MB26_DATA0)
+#define bfin_write_CAN0_MB26_DATA0(val)		bfin_write16(CAN0_MB26_DATA0, val)
+#define bfin_read_CAN0_MB26_DATA1()		bfin_read16(CAN0_MB26_DATA1)
+#define bfin_write_CAN0_MB26_DATA1(val)		bfin_write16(CAN0_MB26_DATA1, val)
+#define bfin_read_CAN0_MB26_DATA2()		bfin_read16(CAN0_MB26_DATA2)
+#define bfin_write_CAN0_MB26_DATA2(val)		bfin_write16(CAN0_MB26_DATA2, val)
+#define bfin_read_CAN0_MB26_DATA3()		bfin_read16(CAN0_MB26_DATA3)
+#define bfin_write_CAN0_MB26_DATA3(val)		bfin_write16(CAN0_MB26_DATA3, val)
+#define bfin_read_CAN0_MB26_LENGTH()		bfin_read16(CAN0_MB26_LENGTH)
+#define bfin_write_CAN0_MB26_LENGTH(val)	bfin_write16(CAN0_MB26_LENGTH, val)
+#define bfin_read_CAN0_MB26_TIMESTAMP()		bfin_read16(CAN0_MB26_TIMESTAMP)
+#define bfin_write_CAN0_MB26_TIMESTAMP(val)	bfin_write16(CAN0_MB26_TIMESTAMP, val)
+#define bfin_read_CAN0_MB26_ID0()		bfin_read16(CAN0_MB26_ID0)
+#define bfin_write_CAN0_MB26_ID0(val)		bfin_write16(CAN0_MB26_ID0, val)
+#define bfin_read_CAN0_MB26_ID1()		bfin_read16(CAN0_MB26_ID1)
+#define bfin_write_CAN0_MB26_ID1(val)		bfin_write16(CAN0_MB26_ID1, val)
+#define bfin_read_CAN0_MB27_DATA0()		bfin_read16(CAN0_MB27_DATA0)
+#define bfin_write_CAN0_MB27_DATA0(val)		bfin_write16(CAN0_MB27_DATA0, val)
+#define bfin_read_CAN0_MB27_DATA1()		bfin_read16(CAN0_MB27_DATA1)
+#define bfin_write_CAN0_MB27_DATA1(val)		bfin_write16(CAN0_MB27_DATA1, val)
+#define bfin_read_CAN0_MB27_DATA2()		bfin_read16(CAN0_MB27_DATA2)
+#define bfin_write_CAN0_MB27_DATA2(val)		bfin_write16(CAN0_MB27_DATA2, val)
+#define bfin_read_CAN0_MB27_DATA3()		bfin_read16(CAN0_MB27_DATA3)
+#define bfin_write_CAN0_MB27_DATA3(val)		bfin_write16(CAN0_MB27_DATA3, val)
+#define bfin_read_CAN0_MB27_LENGTH()		bfin_read16(CAN0_MB27_LENGTH)
+#define bfin_write_CAN0_MB27_LENGTH(val)	bfin_write16(CAN0_MB27_LENGTH, val)
+#define bfin_read_CAN0_MB27_TIMESTAMP()		bfin_read16(CAN0_MB27_TIMESTAMP)
+#define bfin_write_CAN0_MB27_TIMESTAMP(val)	bfin_write16(CAN0_MB27_TIMESTAMP, val)
+#define bfin_read_CAN0_MB27_ID0()		bfin_read16(CAN0_MB27_ID0)
+#define bfin_write_CAN0_MB27_ID0(val)		bfin_write16(CAN0_MB27_ID0, val)
+#define bfin_read_CAN0_MB27_ID1()		bfin_read16(CAN0_MB27_ID1)
+#define bfin_write_CAN0_MB27_ID1(val)		bfin_write16(CAN0_MB27_ID1, val)
+#define bfin_read_CAN0_MB28_DATA0()		bfin_read16(CAN0_MB28_DATA0)
+#define bfin_write_CAN0_MB28_DATA0(val)		bfin_write16(CAN0_MB28_DATA0, val)
+#define bfin_read_CAN0_MB28_DATA1()		bfin_read16(CAN0_MB28_DATA1)
+#define bfin_write_CAN0_MB28_DATA1(val)		bfin_write16(CAN0_MB28_DATA1, val)
+#define bfin_read_CAN0_MB28_DATA2()		bfin_read16(CAN0_MB28_DATA2)
+#define bfin_write_CAN0_MB28_DATA2(val)		bfin_write16(CAN0_MB28_DATA2, val)
+#define bfin_read_CAN0_MB28_DATA3()		bfin_read16(CAN0_MB28_DATA3)
+#define bfin_write_CAN0_MB28_DATA3(val)		bfin_write16(CAN0_MB28_DATA3, val)
+#define bfin_read_CAN0_MB28_LENGTH()		bfin_read16(CAN0_MB28_LENGTH)
+#define bfin_write_CAN0_MB28_LENGTH(val)	bfin_write16(CAN0_MB28_LENGTH, val)
+#define bfin_read_CAN0_MB28_TIMESTAMP()		bfin_read16(CAN0_MB28_TIMESTAMP)
+#define bfin_write_CAN0_MB28_TIMESTAMP(val)	bfin_write16(CAN0_MB28_TIMESTAMP, val)
+#define bfin_read_CAN0_MB28_ID0()		bfin_read16(CAN0_MB28_ID0)
+#define bfin_write_CAN0_MB28_ID0(val)		bfin_write16(CAN0_MB28_ID0, val)
+#define bfin_read_CAN0_MB28_ID1()		bfin_read16(CAN0_MB28_ID1)
+#define bfin_write_CAN0_MB28_ID1(val)		bfin_write16(CAN0_MB28_ID1, val)
+#define bfin_read_CAN0_MB29_DATA0()		bfin_read16(CAN0_MB29_DATA0)
+#define bfin_write_CAN0_MB29_DATA0(val)		bfin_write16(CAN0_MB29_DATA0, val)
+#define bfin_read_CAN0_MB29_DATA1()		bfin_read16(CAN0_MB29_DATA1)
+#define bfin_write_CAN0_MB29_DATA1(val)		bfin_write16(CAN0_MB29_DATA1, val)
+#define bfin_read_CAN0_MB29_DATA2()		bfin_read16(CAN0_MB29_DATA2)
+#define bfin_write_CAN0_MB29_DATA2(val)		bfin_write16(CAN0_MB29_DATA2, val)
+#define bfin_read_CAN0_MB29_DATA3()		bfin_read16(CAN0_MB29_DATA3)
+#define bfin_write_CAN0_MB29_DATA3(val)		bfin_write16(CAN0_MB29_DATA3, val)
+#define bfin_read_CAN0_MB29_LENGTH()		bfin_read16(CAN0_MB29_LENGTH)
+#define bfin_write_CAN0_MB29_LENGTH(val)	bfin_write16(CAN0_MB29_LENGTH, val)
+#define bfin_read_CAN0_MB29_TIMESTAMP()		bfin_read16(CAN0_MB29_TIMESTAMP)
+#define bfin_write_CAN0_MB29_TIMESTAMP(val)	bfin_write16(CAN0_MB29_TIMESTAMP, val)
+#define bfin_read_CAN0_MB29_ID0()		bfin_read16(CAN0_MB29_ID0)
+#define bfin_write_CAN0_MB29_ID0(val)		bfin_write16(CAN0_MB29_ID0, val)
+#define bfin_read_CAN0_MB29_ID1()		bfin_read16(CAN0_MB29_ID1)
+#define bfin_write_CAN0_MB29_ID1(val)		bfin_write16(CAN0_MB29_ID1, val)
+#define bfin_read_CAN0_MB30_DATA0()		bfin_read16(CAN0_MB30_DATA0)
+#define bfin_write_CAN0_MB30_DATA0(val)		bfin_write16(CAN0_MB30_DATA0, val)
+#define bfin_read_CAN0_MB30_DATA1()		bfin_read16(CAN0_MB30_DATA1)
+#define bfin_write_CAN0_MB30_DATA1(val)		bfin_write16(CAN0_MB30_DATA1, val)
+#define bfin_read_CAN0_MB30_DATA2()		bfin_read16(CAN0_MB30_DATA2)
+#define bfin_write_CAN0_MB30_DATA2(val)		bfin_write16(CAN0_MB30_DATA2, val)
+#define bfin_read_CAN0_MB30_DATA3()		bfin_read16(CAN0_MB30_DATA3)
+#define bfin_write_CAN0_MB30_DATA3(val)		bfin_write16(CAN0_MB30_DATA3, val)
+#define bfin_read_CAN0_MB30_LENGTH()		bfin_read16(CAN0_MB30_LENGTH)
+#define bfin_write_CAN0_MB30_LENGTH(val)	bfin_write16(CAN0_MB30_LENGTH, val)
+#define bfin_read_CAN0_MB30_TIMESTAMP()		bfin_read16(CAN0_MB30_TIMESTAMP)
+#define bfin_write_CAN0_MB30_TIMESTAMP(val)	bfin_write16(CAN0_MB30_TIMESTAMP, val)
+#define bfin_read_CAN0_MB30_ID0()		bfin_read16(CAN0_MB30_ID0)
+#define bfin_write_CAN0_MB30_ID0(val)		bfin_write16(CAN0_MB30_ID0, val)
+#define bfin_read_CAN0_MB30_ID1()		bfin_read16(CAN0_MB30_ID1)
+#define bfin_write_CAN0_MB30_ID1(val)		bfin_write16(CAN0_MB30_ID1, val)
+#define bfin_read_CAN0_MB31_DATA0()		bfin_read16(CAN0_MB31_DATA0)
+#define bfin_write_CAN0_MB31_DATA0(val)		bfin_write16(CAN0_MB31_DATA0, val)
+#define bfin_read_CAN0_MB31_DATA1()		bfin_read16(CAN0_MB31_DATA1)
+#define bfin_write_CAN0_MB31_DATA1(val)		bfin_write16(CAN0_MB31_DATA1, val)
+#define bfin_read_CAN0_MB31_DATA2()		bfin_read16(CAN0_MB31_DATA2)
+#define bfin_write_CAN0_MB31_DATA2(val)		bfin_write16(CAN0_MB31_DATA2, val)
+#define bfin_read_CAN0_MB31_DATA3()		bfin_read16(CAN0_MB31_DATA3)
+#define bfin_write_CAN0_MB31_DATA3(val)		bfin_write16(CAN0_MB31_DATA3, val)
+#define bfin_read_CAN0_MB31_LENGTH()		bfin_read16(CAN0_MB31_LENGTH)
+#define bfin_write_CAN0_MB31_LENGTH(val)	bfin_write16(CAN0_MB31_LENGTH, val)
+#define bfin_read_CAN0_MB31_TIMESTAMP()		bfin_read16(CAN0_MB31_TIMESTAMP)
+#define bfin_write_CAN0_MB31_TIMESTAMP(val)	bfin_write16(CAN0_MB31_TIMESTAMP, val)
+#define bfin_read_CAN0_MB31_ID0()		bfin_read16(CAN0_MB31_ID0)
+#define bfin_write_CAN0_MB31_ID0(val)		bfin_write16(CAN0_MB31_ID0, val)
+#define bfin_read_CAN0_MB31_ID1()		bfin_read16(CAN0_MB31_ID1)
+#define bfin_write_CAN0_MB31_ID1(val)		bfin_write16(CAN0_MB31_ID1, val)
+
+/* UART3 Registers */
+
+#define bfin_read_UART3_DLL()		bfin_read16(UART3_DLL)
+#define bfin_write_UART3_DLL(val)	bfin_write16(UART3_DLL, val)
+#define bfin_read_UART3_DLH()		bfin_read16(UART3_DLH)
+#define bfin_write_UART3_DLH(val)	bfin_write16(UART3_DLH, val)
+#define bfin_read_UART3_GCTL()		bfin_read16(UART3_GCTL)
+#define bfin_write_UART3_GCTL(val)	bfin_write16(UART3_GCTL, val)
+#define bfin_read_UART3_LCR()		bfin_read16(UART3_LCR)
+#define bfin_write_UART3_LCR(val)	bfin_write16(UART3_LCR, val)
+#define bfin_read_UART3_MCR()		bfin_read16(UART3_MCR)
+#define bfin_write_UART3_MCR(val)	bfin_write16(UART3_MCR, val)
+#define bfin_read_UART3_LSR()		bfin_read16(UART3_LSR)
+#define bfin_write_UART3_LSR(val)	bfin_write16(UART3_LSR, val)
+#define bfin_read_UART3_MSR()		bfin_read16(UART3_MSR)
+#define bfin_write_UART3_MSR(val)	bfin_write16(UART3_MSR, val)
+#define bfin_read_UART3_SCR()		bfin_read16(UART3_SCR)
+#define bfin_write_UART3_SCR(val)	bfin_write16(UART3_SCR, val)
+#define bfin_read_UART3_IER_SET()	bfin_read16(UART3_IER_SET)
+#define bfin_write_UART3_IER_SET(val)	bfin_write16(UART3_IER_SET, val)
+#define bfin_read_UART3_IER_CLEAR()	bfin_read16(UART3_IER_CLEAR)
+#define bfin_write_UART3_IER_CLEAR(val)	bfin_write16(UART3_IER_CLEAR, val)
+#define bfin_read_UART3_THR()		bfin_read16(UART3_THR)
+#define bfin_write_UART3_THR(val)	bfin_write16(UART3_THR, val)
+#define bfin_read_UART3_RBR()		bfin_read16(UART3_RBR)
+#define bfin_write_UART3_RBR(val)	bfin_write16(UART3_RBR, val)
+
+/* NFC Registers */
+
+#define bfin_read_NFC_CTL()		bfin_read16(NFC_CTL)
+#define bfin_write_NFC_CTL(val)		bfin_write16(NFC_CTL, val)
+#define bfin_read_NFC_STAT()		bfin_read16(NFC_STAT)
+#define bfin_write_NFC_STAT(val)	bfin_write16(NFC_STAT, val)
+#define bfin_read_NFC_IRQSTAT()		bfin_read16(NFC_IRQSTAT)
+#define bfin_write_NFC_IRQSTAT(val)	bfin_write16(NFC_IRQSTAT, val)
+#define bfin_read_NFC_IRQMASK()		bfin_read16(NFC_IRQMASK)
+#define bfin_write_NFC_IRQMASK(val)	bfin_write16(NFC_IRQMASK, val)
+#define bfin_read_NFC_ECC0()		bfin_read16(NFC_ECC0)
+#define bfin_write_NFC_ECC0(val)	bfin_write16(NFC_ECC0, val)
+#define bfin_read_NFC_ECC1()		bfin_read16(NFC_ECC1)
+#define bfin_write_NFC_ECC1(val)	bfin_write16(NFC_ECC1, val)
+#define bfin_read_NFC_ECC2()		bfin_read16(NFC_ECC2)
+#define bfin_write_NFC_ECC2(val)	bfin_write16(NFC_ECC2, val)
+#define bfin_read_NFC_ECC3()		bfin_read16(NFC_ECC3)
+#define bfin_write_NFC_ECC3(val)	bfin_write16(NFC_ECC3, val)
+#define bfin_read_NFC_COUNT()		bfin_read16(NFC_COUNT)
+#define bfin_write_NFC_COUNT(val)	bfin_write16(NFC_COUNT, val)
+#define bfin_read_NFC_RST()		bfin_read16(NFC_RST)
+#define bfin_write_NFC_RST(val)		bfin_write16(NFC_RST, val)
+#define bfin_read_NFC_PGCTL()		bfin_read16(NFC_PGCTL)
+#define bfin_write_NFC_PGCTL(val)	bfin_write16(NFC_PGCTL, val)
+#define bfin_read_NFC_READ()		bfin_read16(NFC_READ)
+#define bfin_write_NFC_READ(val)	bfin_write16(NFC_READ, val)
+#define bfin_read_NFC_ADDR()		bfin_read16(NFC_ADDR)
+#define bfin_write_NFC_ADDR(val)	bfin_write16(NFC_ADDR, val)
+#define bfin_read_NFC_CMD()		bfin_read16(NFC_CMD)
+#define bfin_write_NFC_CMD(val)		bfin_write16(NFC_CMD, val)
+#define bfin_read_NFC_DATA_WR()		bfin_read16(NFC_DATA_WR)
+#define bfin_write_NFC_DATA_WR(val)	bfin_write16(NFC_DATA_WR, val)
+#define bfin_read_NFC_DATA_RD()		bfin_read16(NFC_DATA_RD)
+#define bfin_write_NFC_DATA_RD(val)	bfin_write16(NFC_DATA_RD, val)
+
+/* Counter Registers */
+
+#define bfin_read_CNT_CONFIG()		bfin_read16(CNT_CONFIG)
+#define bfin_write_CNT_CONFIG(val)	bfin_write16(CNT_CONFIG, val)
+#define bfin_read_CNT_IMASK()		bfin_read16(CNT_IMASK)
+#define bfin_write_CNT_IMASK(val)	bfin_write16(CNT_IMASK, val)
+#define bfin_read_CNT_STATUS()		bfin_read16(CNT_STATUS)
+#define bfin_write_CNT_STATUS(val)	bfin_write16(CNT_STATUS, val)
+#define bfin_read_CNT_COMMAND()		bfin_read16(CNT_COMMAND)
+#define bfin_write_CNT_COMMAND(val)	bfin_write16(CNT_COMMAND, val)
+#define bfin_read_CNT_DEBOUNCE()	bfin_read16(CNT_DEBOUNCE)
+#define bfin_write_CNT_DEBOUNCE(val)	bfin_write16(CNT_DEBOUNCE, val)
+#define bfin_read_CNT_COUNTER()		bfin_read32(CNT_COUNTER)
+#define bfin_write_CNT_COUNTER(val)	bfin_write32(CNT_COUNTER, val)
+#define bfin_read_CNT_MAX()		bfin_read32(CNT_MAX)
+#define bfin_write_CNT_MAX(val)		bfin_write32(CNT_MAX, val)
+#define bfin_read_CNT_MIN()		bfin_read32(CNT_MIN)
+#define bfin_write_CNT_MIN(val)		bfin_write32(CNT_MIN, val)
+
+/* Security Registers */
+
+#define bfin_read_SECURE_SYSSWT()	bfin_read32(SECURE_SYSSWT)
+#define bfin_write_SECURE_SYSSWT(val)	bfin_write32(SECURE_SYSSWT, val)
+#define bfin_read_SECURE_CONTROL()	bfin_read16(SECURE_CONTROL)
+#define bfin_write_SECURE_CONTROL(val)	bfin_write16(SECURE_CONTROL, val)
+#define bfin_read_SECURE_STATUS()	bfin_read16(SECURE_STATUS)
+#define bfin_write_SECURE_STATUS(val)	bfin_write16(SECURE_STATUS, val)
+
+/* DMA Peribfin_read_()heral Mux Register */
+
+#define bfin_read_DMAC1_PERIMUX()	bfin_read16(DMAC1_PERIMUX)
+#define bfin_write_DMAC1_PERIMUX(val)	bfin_write16(DMAC1_PERIMUX, val)
+
+/* Handshake MDMA is not defined in the shared file because it is not available on the ADSP-BF542 bfin_read_()rocessor */
+
+#endif /* _CDEF_BF54X_H */
+
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF542.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF542.h
new file mode 100644
index 0000000..ae4b889
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF542.h
@@ -0,0 +1,763 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF542_H
+#define _DEF_BF542_H
+
+/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
+#include "defBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF542 that are not in the common header */
+
+/* ATAPI Registers */
+
+#define                    ATAPI_CONTROL  0xffc03800   /* ATAPI Control Register */
+#define                     ATAPI_STATUS  0xffc03804   /* ATAPI Status Register */
+#define                   ATAPI_DEV_ADDR  0xffc03808   /* ATAPI Device Register Address */
+#define                  ATAPI_DEV_TXBUF  0xffc0380c   /* ATAPI Device Register Write Data */
+#define                  ATAPI_DEV_RXBUF  0xffc03810   /* ATAPI Device Register Read Data */
+#define                   ATAPI_INT_MASK  0xffc03814   /* ATAPI Interrupt Mask Register */
+#define                 ATAPI_INT_STATUS  0xffc03818   /* ATAPI Interrupt Status Register */
+#define                   ATAPI_XFER_LEN  0xffc0381c   /* ATAPI Length of Transfer */
+#define                ATAPI_LINE_STATUS  0xffc03820   /* ATAPI Line Status */
+#define                   ATAPI_SM_STATE  0xffc03824   /* ATAPI State Machine Status */
+#define                  ATAPI_TERMINATE  0xffc03828   /* ATAPI Host Terminate */
+#define                 ATAPI_PIO_TFRCNT  0xffc0382c   /* ATAPI PIO mode transfer count */
+#define                 ATAPI_DMA_TFRCNT  0xffc03830   /* ATAPI DMA mode transfer count */
+#define               ATAPI_UMAIN_TFRCNT  0xffc03834   /* ATAPI UDMAIN transfer count */
+#define             ATAPI_UDMAOUT_TFRCNT  0xffc03838   /* ATAPI UDMAOUT transfer count */
+#define                  ATAPI_REG_TIM_0  0xffc03840   /* ATAPI Register Transfer Timing 0 */
+#define                  ATAPI_PIO_TIM_0  0xffc03844   /* ATAPI PIO Timing 0 Register */
+#define                  ATAPI_PIO_TIM_1  0xffc03848   /* ATAPI PIO Timing 1 Register */
+#define                ATAPI_MULTI_TIM_0  0xffc03850   /* ATAPI Multi-DMA Timing 0 Register */
+#define                ATAPI_MULTI_TIM_1  0xffc03854   /* ATAPI Multi-DMA Timing 1 Register */
+#define                ATAPI_MULTI_TIM_2  0xffc03858   /* ATAPI Multi-DMA Timing 2 Register */
+#define                ATAPI_ULTRA_TIM_0  0xffc03860   /* ATAPI Ultra-DMA Timing 0 Register */
+#define                ATAPI_ULTRA_TIM_1  0xffc03864   /* ATAPI Ultra-DMA Timing 1 Register */
+#define                ATAPI_ULTRA_TIM_2  0xffc03868   /* ATAPI Ultra-DMA Timing 2 Register */
+#define                ATAPI_ULTRA_TIM_3  0xffc0386c   /* ATAPI Ultra-DMA Timing 3 Register */
+
+/* SDH Registers */
+
+#define                      SDH_PWR_CTL  0xffc03900   /* SDH Power Control */
+#define                      SDH_CLK_CTL  0xffc03904   /* SDH Clock Control */
+#define                     SDH_ARGUMENT  0xffc03908   /* SDH Argument */
+#define                      SDH_COMMAND  0xffc0390c   /* SDH Command */
+#define                     SDH_RESP_CMD  0xffc03910   /* SDH Response Command */
+#define                    SDH_RESPONSE0  0xffc03914   /* SDH Response0 */
+#define                    SDH_RESPONSE1  0xffc03918   /* SDH Response1 */
+#define                    SDH_RESPONSE2  0xffc0391c   /* SDH Response2 */
+#define                    SDH_RESPONSE3  0xffc03920   /* SDH Response3 */
+#define                   SDH_DATA_TIMER  0xffc03924   /* SDH Data Timer */
+#define                    SDH_DATA_LGTH  0xffc03928   /* SDH Data Length */
+#define                     SDH_DATA_CTL  0xffc0392c   /* SDH Data Control */
+#define                     SDH_DATA_CNT  0xffc03930   /* SDH Data Counter */
+#define                       SDH_STATUS  0xffc03934   /* SDH Status */
+#define                   SDH_STATUS_CLR  0xffc03938   /* SDH Status Clear */
+#define                        SDH_MASK0  0xffc0393c   /* SDH Interrupt0 Mask */
+#define                        SDH_MASK1  0xffc03940   /* SDH Interrupt1 Mask */
+#define                     SDH_FIFO_CNT  0xffc03948   /* SDH FIFO Counter */
+#define                         SDH_FIFO  0xffc03980   /* SDH Data FIFO */
+#define                     SDH_E_STATUS  0xffc039c0   /* SDH Exception Status */
+#define                       SDH_E_MASK  0xffc039c4   /* SDH Exception Mask */
+#define                          SDH_CFG  0xffc039c8   /* SDH Configuration */
+#define                   SDH_RD_WAIT_EN  0xffc039cc   /* SDH Read Wait Enable */
+#define                         SDH_PID0  0xffc039d0   /* SDH Peripheral Identification0 */
+#define                         SDH_PID1  0xffc039d4   /* SDH Peripheral Identification1 */
+#define                         SDH_PID2  0xffc039d8   /* SDH Peripheral Identification2 */
+#define                         SDH_PID3  0xffc039dc   /* SDH Peripheral Identification3 */
+#define                         SDH_PID4  0xffc039e0   /* SDH Peripheral Identification4 */
+#define                         SDH_PID5  0xffc039e4   /* SDH Peripheral Identification5 */
+#define                         SDH_PID6  0xffc039e8   /* SDH Peripheral Identification6 */
+#define                         SDH_PID7  0xffc039ec   /* SDH Peripheral Identification7 */
+
+/* USB Control Registers */
+
+#define                        USB_FADDR  0xffc03c00   /* Function address register */
+#define                        USB_POWER  0xffc03c04   /* Power management register */
+#define                       USB_INTRTX  0xffc03c08   /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
+#define                       USB_INTRRX  0xffc03c0c   /* Interrupt register for Rx endpoints 1 to 7 */
+#define                      USB_INTRTXE  0xffc03c10   /* Interrupt enable register for IntrTx */
+#define                      USB_INTRRXE  0xffc03c14   /* Interrupt enable register for IntrRx */
+#define                      USB_INTRUSB  0xffc03c18   /* Interrupt register for common USB interrupts */
+#define                     USB_INTRUSBE  0xffc03c1c   /* Interrupt enable register for IntrUSB */
+#define                        USB_FRAME  0xffc03c20   /* USB frame number */
+#define                        USB_INDEX  0xffc03c24   /* Index register for selecting the indexed endpoint registers */
+#define                     USB_TESTMODE  0xffc03c28   /* Enabled USB 20 test modes */
+#define                     USB_GLOBINTR  0xffc03c2c   /* Global Interrupt Mask register and Wakeup Exception Interrupt */
+#define                   USB_GLOBAL_CTL  0xffc03c30   /* Global Clock Control for the core */
+
+/* USB Packet Control Registers */
+
+#define                USB_TX_MAX_PACKET  0xffc03c40   /* Maximum packet size for Host Tx endpoint */
+#define                         USB_CSR0  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                        USB_TXCSR  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                USB_RX_MAX_PACKET  0xffc03c48   /* Maximum packet size for Host Rx endpoint */
+#define                        USB_RXCSR  0xffc03c4c   /* Control Status register for Host Rx endpoint */
+#define                       USB_COUNT0  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                      USB_RXCOUNT  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                       USB_TXTYPE  0xffc03c54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
+#define                    USB_NAKLIMIT0  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                   USB_TXINTERVAL  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                       USB_RXTYPE  0xffc03c5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
+#define                   USB_RXINTERVAL  0xffc03c60   /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
+#define                      USB_TXCOUNT  0xffc03c68   /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* USB Endpoint FIFO Registers */
+
+#define                     USB_EP0_FIFO  0xffc03c80   /* Endpoint 0 FIFO */
+#define                     USB_EP1_FIFO  0xffc03c88   /* Endpoint 1 FIFO */
+#define                     USB_EP2_FIFO  0xffc03c90   /* Endpoint 2 FIFO */
+#define                     USB_EP3_FIFO  0xffc03c98   /* Endpoint 3 FIFO */
+#define                     USB_EP4_FIFO  0xffc03ca0   /* Endpoint 4 FIFO */
+#define                     USB_EP5_FIFO  0xffc03ca8   /* Endpoint 5 FIFO */
+#define                     USB_EP6_FIFO  0xffc03cb0   /* Endpoint 6 FIFO */
+#define                     USB_EP7_FIFO  0xffc03cb8   /* Endpoint 7 FIFO */
+
+/* USB OTG Control Registers */
+
+#define                  USB_OTG_DEV_CTL  0xffc03d00   /* OTG Device Control Register */
+#define                 USB_OTG_VBUS_IRQ  0xffc03d04   /* OTG VBUS Control Interrupts */
+#define                USB_OTG_VBUS_MASK  0xffc03d08   /* VBUS Control Interrupt Enable */
+
+/* USB Phy Control Registers */
+
+#define                     USB_LINKINFO  0xffc03d48   /* Enables programming of some PHY-side delays */
+#define                        USB_VPLEN  0xffc03d4c   /* Determines duration of VBUS pulse for VBUS charging */
+#define                      USB_HS_EOF1  0xffc03d50   /* Time buffer for High-Speed transactions */
+#define                      USB_FS_EOF1  0xffc03d54   /* Time buffer for Full-Speed transactions */
+#define                      USB_LS_EOF1  0xffc03d58   /* Time buffer for Low-Speed transactions */
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define                   USB_APHY_CNTRL  0xffc03de0   /* Register that increases visibility of Analog PHY */
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define                   USB_APHY_CALIB  0xffc03de4   /* Register used to set some calibration values */
+#define                  USB_APHY_CNTRL2  0xffc03de8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
+
+#define                  USB_PLLOSC_CTRL  0xffc03df0   /* Used to program different parameters for USB PLL and Oscillator */
+#define                   USB_SRP_CLKDIV  0xffc03df4   /* Used to program clock divide value for the clock fed to the SRP detection logic */
+
+/* USB Endpoint 0 Control Registers */
+
+#define                USB_EP_NI0_TXMAXP  0xffc03e00   /* Maximum packet size for Host Tx endpoint0 */
+#define                 USB_EP_NI0_TXCSR  0xffc03e04   /* Control Status register for endpoint 0 */
+#define                USB_EP_NI0_RXMAXP  0xffc03e08   /* Maximum packet size for Host Rx endpoint0 */
+#define                 USB_EP_NI0_RXCSR  0xffc03e0c   /* Control Status register for Host Rx endpoint0 */
+#define               USB_EP_NI0_RXCOUNT  0xffc03e10   /* Number of bytes received in endpoint 0 FIFO */
+#define                USB_EP_NI0_TXTYPE  0xffc03e14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
+#define            USB_EP_NI0_TXINTERVAL  0xffc03e18   /* Sets the NAK response timeout on Endpoint 0 */
+#define                USB_EP_NI0_RXTYPE  0xffc03e1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
+#define            USB_EP_NI0_RXINTERVAL  0xffc03e20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
+
+/* USB Endpoint 1 Control Registers */
+
+#define               USB_EP_NI0_TXCOUNT  0xffc03e28   /* Number of bytes to be written to the endpoint0 Tx FIFO */
+#define                USB_EP_NI1_TXMAXP  0xffc03e40   /* Maximum packet size for Host Tx endpoint1 */
+#define                 USB_EP_NI1_TXCSR  0xffc03e44   /* Control Status register for endpoint1 */
+#define                USB_EP_NI1_RXMAXP  0xffc03e48   /* Maximum packet size for Host Rx endpoint1 */
+#define                 USB_EP_NI1_RXCSR  0xffc03e4c   /* Control Status register for Host Rx endpoint1 */
+#define               USB_EP_NI1_RXCOUNT  0xffc03e50   /* Number of bytes received in endpoint1 FIFO */
+#define                USB_EP_NI1_TXTYPE  0xffc03e54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
+#define            USB_EP_NI1_TXINTERVAL  0xffc03e58   /* Sets the NAK response timeout on Endpoint1 */
+#define                USB_EP_NI1_RXTYPE  0xffc03e5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
+#define            USB_EP_NI1_RXINTERVAL  0xffc03e60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
+
+/* USB Endpoint 2 Control Registers */
+
+#define               USB_EP_NI1_TXCOUNT  0xffc03e68   /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
+#define                USB_EP_NI2_TXMAXP  0xffc03e80   /* Maximum packet size for Host Tx endpoint2 */
+#define                 USB_EP_NI2_TXCSR  0xffc03e84   /* Control Status register for endpoint2 */
+#define                USB_EP_NI2_RXMAXP  0xffc03e88   /* Maximum packet size for Host Rx endpoint2 */
+#define                 USB_EP_NI2_RXCSR  0xffc03e8c   /* Control Status register for Host Rx endpoint2 */
+#define               USB_EP_NI2_RXCOUNT  0xffc03e90   /* Number of bytes received in endpoint2 FIFO */
+#define                USB_EP_NI2_TXTYPE  0xffc03e94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
+#define            USB_EP_NI2_TXINTERVAL  0xffc03e98   /* Sets the NAK response timeout on Endpoint2 */
+#define                USB_EP_NI2_RXTYPE  0xffc03e9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
+#define            USB_EP_NI2_RXINTERVAL  0xffc03ea0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
+
+/* USB Endpoint 3 Control Registers */
+
+#define               USB_EP_NI2_TXCOUNT  0xffc03ea8   /* Number of bytes to be written to the endpoint2 Tx FIFO */
+#define                USB_EP_NI3_TXMAXP  0xffc03ec0   /* Maximum packet size for Host Tx endpoint3 */
+#define                 USB_EP_NI3_TXCSR  0xffc03ec4   /* Control Status register for endpoint3 */
+#define                USB_EP_NI3_RXMAXP  0xffc03ec8   /* Maximum packet size for Host Rx endpoint3 */
+#define                 USB_EP_NI3_RXCSR  0xffc03ecc   /* Control Status register for Host Rx endpoint3 */
+#define               USB_EP_NI3_RXCOUNT  0xffc03ed0   /* Number of bytes received in endpoint3 FIFO */
+#define                USB_EP_NI3_TXTYPE  0xffc03ed4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
+#define            USB_EP_NI3_TXINTERVAL  0xffc03ed8   /* Sets the NAK response timeout on Endpoint3 */
+#define                USB_EP_NI3_RXTYPE  0xffc03edc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
+#define            USB_EP_NI3_RXINTERVAL  0xffc03ee0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
+
+/* USB Endpoint 4 Control Registers */
+
+#define               USB_EP_NI3_TXCOUNT  0xffc03ee8   /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
+#define                USB_EP_NI4_TXMAXP  0xffc03f00   /* Maximum packet size for Host Tx endpoint4 */
+#define                 USB_EP_NI4_TXCSR  0xffc03f04   /* Control Status register for endpoint4 */
+#define                USB_EP_NI4_RXMAXP  0xffc03f08   /* Maximum packet size for Host Rx endpoint4 */
+#define                 USB_EP_NI4_RXCSR  0xffc03f0c   /* Control Status register for Host Rx endpoint4 */
+#define               USB_EP_NI4_RXCOUNT  0xffc03f10   /* Number of bytes received in endpoint4 FIFO */
+#define                USB_EP_NI4_TXTYPE  0xffc03f14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
+#define            USB_EP_NI4_TXINTERVAL  0xffc03f18   /* Sets the NAK response timeout on Endpoint4 */
+#define                USB_EP_NI4_RXTYPE  0xffc03f1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
+#define            USB_EP_NI4_RXINTERVAL  0xffc03f20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
+
+/* USB Endpoint 5 Control Registers */
+
+#define               USB_EP_NI4_TXCOUNT  0xffc03f28   /* Number of bytes to be written to the endpoint4 Tx FIFO */
+#define                USB_EP_NI5_TXMAXP  0xffc03f40   /* Maximum packet size for Host Tx endpoint5 */
+#define                 USB_EP_NI5_TXCSR  0xffc03f44   /* Control Status register for endpoint5 */
+#define                USB_EP_NI5_RXMAXP  0xffc03f48   /* Maximum packet size for Host Rx endpoint5 */
+#define                 USB_EP_NI5_RXCSR  0xffc03f4c   /* Control Status register for Host Rx endpoint5 */
+#define               USB_EP_NI5_RXCOUNT  0xffc03f50   /* Number of bytes received in endpoint5 FIFO */
+#define                USB_EP_NI5_TXTYPE  0xffc03f54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
+#define            USB_EP_NI5_TXINTERVAL  0xffc03f58   /* Sets the NAK response timeout on Endpoint5 */
+#define                USB_EP_NI5_RXTYPE  0xffc03f5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
+#define            USB_EP_NI5_RXINTERVAL  0xffc03f60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
+
+/* USB Endpoint 6 Control Registers */
+
+#define               USB_EP_NI5_TXCOUNT  0xffc03f68   /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
+#define                USB_EP_NI6_TXMAXP  0xffc03f80   /* Maximum packet size for Host Tx endpoint6 */
+#define                 USB_EP_NI6_TXCSR  0xffc03f84   /* Control Status register for endpoint6 */
+#define                USB_EP_NI6_RXMAXP  0xffc03f88   /* Maximum packet size for Host Rx endpoint6 */
+#define                 USB_EP_NI6_RXCSR  0xffc03f8c   /* Control Status register for Host Rx endpoint6 */
+#define               USB_EP_NI6_RXCOUNT  0xffc03f90   /* Number of bytes received in endpoint6 FIFO */
+#define                USB_EP_NI6_TXTYPE  0xffc03f94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
+#define            USB_EP_NI6_TXINTERVAL  0xffc03f98   /* Sets the NAK response timeout on Endpoint6 */
+#define                USB_EP_NI6_RXTYPE  0xffc03f9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
+#define            USB_EP_NI6_RXINTERVAL  0xffc03fa0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
+
+/* USB Endpoint 7 Control Registers */
+
+#define               USB_EP_NI6_TXCOUNT  0xffc03fa8   /* Number of bytes to be written to the endpoint6 Tx FIFO */
+#define                USB_EP_NI7_TXMAXP  0xffc03fc0   /* Maximum packet size for Host Tx endpoint7 */
+#define                 USB_EP_NI7_TXCSR  0xffc03fc4   /* Control Status register for endpoint7 */
+#define                USB_EP_NI7_RXMAXP  0xffc03fc8   /* Maximum packet size for Host Rx endpoint7 */
+#define                 USB_EP_NI7_RXCSR  0xffc03fcc   /* Control Status register for Host Rx endpoint7 */
+#define               USB_EP_NI7_RXCOUNT  0xffc03fd0   /* Number of bytes received in endpoint7 FIFO */
+#define                USB_EP_NI7_TXTYPE  0xffc03fd4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
+#define            USB_EP_NI7_TXINTERVAL  0xffc03fd8   /* Sets the NAK response timeout on Endpoint7 */
+#define                USB_EP_NI7_RXTYPE  0xffc03fdc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
+#define            USB_EP_NI7_RXINTERVAL  0xffc03ff0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
+#define               USB_EP_NI7_TXCOUNT  0xffc03ff8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
+#define                USB_DMA_INTERRUPT  0xffc04000   /* Indicates pending interrupts for the DMA channels */
+
+/* USB Channel 0 Config Registers */
+
+#define                  USB_DMA0CONTROL  0xffc04004   /* DMA master channel 0 configuration */
+#define                  USB_DMA0ADDRLOW  0xffc04008   /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0ADDRHIGH  0xffc0400c   /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0COUNTLOW  0xffc04010   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
+#define                USB_DMA0COUNTHIGH  0xffc04014   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
+
+/* USB Channel 1 Config Registers */
+
+#define                  USB_DMA1CONTROL  0xffc04024   /* DMA master channel 1 configuration */
+#define                  USB_DMA1ADDRLOW  0xffc04028   /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1ADDRHIGH  0xffc0402c   /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1COUNTLOW  0xffc04030   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
+#define                USB_DMA1COUNTHIGH  0xffc04034   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
+
+/* USB Channel 2 Config Registers */
+
+#define                  USB_DMA2CONTROL  0xffc04044   /* DMA master channel 2 configuration */
+#define                  USB_DMA2ADDRLOW  0xffc04048   /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2ADDRHIGH  0xffc0404c   /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2COUNTLOW  0xffc04050   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
+#define                USB_DMA2COUNTHIGH  0xffc04054   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
+
+/* USB Channel 3 Config Registers */
+
+#define                  USB_DMA3CONTROL  0xffc04064   /* DMA master channel 3 configuration */
+#define                  USB_DMA3ADDRLOW  0xffc04068   /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3ADDRHIGH  0xffc0406c   /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3COUNTLOW  0xffc04070   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
+#define                USB_DMA3COUNTHIGH  0xffc04074   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
+
+/* USB Channel 4 Config Registers */
+
+#define                  USB_DMA4CONTROL  0xffc04084   /* DMA master channel 4 configuration */
+#define                  USB_DMA4ADDRLOW  0xffc04088   /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4ADDRHIGH  0xffc0408c   /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4COUNTLOW  0xffc04090   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
+#define                USB_DMA4COUNTHIGH  0xffc04094   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
+
+/* USB Channel 5 Config Registers */
+
+#define                  USB_DMA5CONTROL  0xffc040a4   /* DMA master channel 5 configuration */
+#define                  USB_DMA5ADDRLOW  0xffc040a8   /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5ADDRHIGH  0xffc040ac   /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5COUNTLOW  0xffc040b0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
+#define                USB_DMA5COUNTHIGH  0xffc040b4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
+
+/* USB Channel 6 Config Registers */
+
+#define                  USB_DMA6CONTROL  0xffc040c4   /* DMA master channel 6 configuration */
+#define                  USB_DMA6ADDRLOW  0xffc040c8   /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6ADDRHIGH  0xffc040cc   /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6COUNTLOW  0xffc040d0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
+#define                USB_DMA6COUNTHIGH  0xffc040d4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
+
+/* USB Channel 7 Config Registers */
+
+#define                  USB_DMA7CONTROL  0xffc040e4   /* DMA master channel 7 configuration */
+#define                  USB_DMA7ADDRLOW  0xffc040e8   /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7ADDRHIGH  0xffc040ec   /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7COUNTLOW  0xffc040f0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
+#define                USB_DMA7COUNTHIGH  0xffc040f4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
+
+/* Keypad Registers */
+
+#define                         KPAD_CTL  0xffc04100   /* Controls keypad module enable and disable */
+#define                    KPAD_PRESCALE  0xffc04104   /* Establish a time base for programing the KPAD_MSEL register */
+#define                        KPAD_MSEL  0xffc04108   /* Selects delay parameters for keypad interface sensitivity */
+#define                      KPAD_ROWCOL  0xffc0410c   /* Captures the row and column output values of the keys pressed */
+#define                        KPAD_STAT  0xffc04110   /* Holds and clears the status of the keypad interface interrupt */
+#define                    KPAD_SOFTEVAL  0xffc04114   /* Lets software force keypad interface to check for keys being pressed */
+
+
+/* ********************************************************** */
+/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
+/*     and MULTI BIT READ MACROS                              */
+/* ********************************************************** */
+
+/* Bit masks for KPAD_CTL */
+
+#define                   KPAD_EN  0x1        /* Keypad Enable */
+#define              KPAD_IRQMODE  0x6        /* Key Press Interrupt Enable */
+#define                KPAD_ROWEN  0x1c00     /* Row Enable Width */
+#define                KPAD_COLEN  0xe000     /* Column Enable Width */
+
+/* Bit masks for KPAD_PRESCALE */
+
+#define         KPAD_PRESCALE_VAL  0x3f       /* Key Prescale Value */
+
+/* Bit masks for KPAD_MSEL */
+
+#define                DBON_SCALE  0xff       /* Debounce Scale Value */
+#define              COLDRV_SCALE  0xff00     /* Column Driver Scale Value */
+
+/* Bit masks for KPAD_ROWCOL */
+
+#define                  KPAD_ROW  0xff       /* Rows Pressed */
+#define                  KPAD_COL  0xff00     /* Columns Pressed */
+
+/* Bit masks for KPAD_STAT */
+
+#define                  KPAD_IRQ  0x1        /* Keypad Interrupt Status */
+#define              KPAD_MROWCOL  0x6        /* Multiple Row/Column Keypress Status */
+#define              KPAD_PRESSED  0x8        /* Key press current status */
+
+/* Bit masks for KPAD_SOFTEVAL */
+
+#define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
+
+/* Bit masks for ATAPI_CONTROL */
+
+#define                 PIO_START  0x1        /* Start PIO/Reg Op */
+#define               MULTI_START  0x2        /* Start Multi-DMA Op */
+#define               ULTRA_START  0x4        /* Start Ultra-DMA Op */
+#define                  XFER_DIR  0x8        /* Transfer Direction */
+#define                  IORDY_EN  0x10       /* IORDY Enable */
+#define                FIFO_FLUSH  0x20       /* Flush FIFOs */
+#define                  SOFT_RST  0x40       /* Soft Reset */
+#define                   DEV_RST  0x80       /* Device Reset */
+#define                TFRCNT_RST  0x100      /* Trans Count Reset */
+#define               END_ON_TERM  0x200      /* End/Terminate Select */
+#define               PIO_USE_DMA  0x400      /* PIO-DMA Enable */
+#define          UDMAIN_FIFO_THRS  0xf000     /* Ultra DMA-IN FIFO Threshold */
+
+/* Bit masks for ATAPI_STATUS */
+
+#define               PIO_XFER_ON  0x1        /* PIO transfer in progress */
+#define             MULTI_XFER_ON  0x2        /* Multi-word DMA transfer in progress */
+#define             ULTRA_XFER_ON  0x4        /* Ultra DMA transfer in progress */
+#define               ULTRA_IN_FL  0xf0       /* Ultra DMA Input FIFO Level */
+
+/* Bit masks for ATAPI_DEV_ADDR */
+
+#define                  DEV_ADDR  0x1f       /* Device Address */
+
+/* Bit masks for ATAPI_INT_MASK */
+
+#define        ATAPI_DEV_INT_MASK  0x1        /* Device interrupt mask */
+#define             PIO_DONE_MASK  0x2        /* PIO transfer done interrupt mask */
+#define           MULTI_DONE_MASK  0x4        /* Multi-DMA transfer done interrupt mask */
+#define          UDMAIN_DONE_MASK  0x8        /* Ultra-DMA in transfer done interrupt mask */
+#define         UDMAOUT_DONE_MASK  0x10       /* Ultra-DMA out transfer done interrupt mask */
+#define       HOST_TERM_XFER_MASK  0x20       /* Host terminate current transfer interrupt mask */
+#define           MULTI_TERM_MASK  0x40       /* Device terminate Multi-DMA transfer interrupt mask */
+#define          UDMAIN_TERM_MASK  0x80       /* Device terminate Ultra-DMA-in transfer interrupt mask */
+#define         UDMAOUT_TERM_MASK  0x100      /* Device terminate Ultra-DMA-out transfer interrupt mask */
+
+/* Bit masks for ATAPI_INT_STATUS */
+
+#define             ATAPI_DEV_INT  0x1        /* Device interrupt status */
+#define              PIO_DONE_INT  0x2        /* PIO transfer done interrupt status */
+#define            MULTI_DONE_INT  0x4        /* Multi-DMA transfer done interrupt status */
+#define           UDMAIN_DONE_INT  0x8        /* Ultra-DMA in transfer done interrupt status */
+#define          UDMAOUT_DONE_INT  0x10       /* Ultra-DMA out transfer done interrupt status */
+#define        HOST_TERM_XFER_INT  0x20       /* Host terminate current transfer interrupt status */
+#define            MULTI_TERM_INT  0x40       /* Device terminate Multi-DMA transfer interrupt status */
+#define           UDMAIN_TERM_INT  0x80       /* Device terminate Ultra-DMA-in transfer interrupt status */
+#define          UDMAOUT_TERM_INT  0x100      /* Device terminate Ultra-DMA-out transfer interrupt status */
+
+/* Bit masks for ATAPI_LINE_STATUS */
+
+#define                ATAPI_INTR  0x1        /* Device interrupt to host line status */
+#define                ATAPI_DASP  0x2        /* Device dasp to host line status */
+#define                ATAPI_CS0N  0x4        /* ATAPI chip select 0 line status */
+#define                ATAPI_CS1N  0x8        /* ATAPI chip select 1 line status */
+#define                ATAPI_ADDR  0x70       /* ATAPI address line status */
+#define              ATAPI_DMAREQ  0x80       /* ATAPI DMA request line status */
+#define             ATAPI_DMAACKN  0x100      /* ATAPI DMA acknowledge line status */
+#define               ATAPI_DIOWN  0x200      /* ATAPI write line status */
+#define               ATAPI_DIORN  0x400      /* ATAPI read line status */
+#define               ATAPI_IORDY  0x800      /* ATAPI IORDY line status */
+
+/* Bit masks for ATAPI_SM_STATE */
+
+#define                PIO_CSTATE  0xf        /* PIO mode state machine current state */
+#define                DMA_CSTATE  0xf0       /* DMA mode state machine current state */
+#define             UDMAIN_CSTATE  0xf00      /* Ultra DMA-In mode state machine current state */
+#define            UDMAOUT_CSTATE  0xf000     /* ATAPI IORDY line status */
+
+/* Bit masks for ATAPI_TERMINATE */
+
+#define           ATAPI_HOST_TERM  0x1        /* Host terminationation */
+
+/* Bit masks for ATAPI_REG_TIM_0 */
+
+#define                    T2_REG  0xff       /* End of cycle time for register access transfers */
+#define                  TEOC_REG  0xff00     /* Selects DIOR/DIOW pulsewidth */
+
+/* Bit masks for ATAPI_PIO_TIM_0 */
+
+#define                    T1_REG  0xf        /* Time from address valid to DIOR/DIOW */
+#define                T2_REG_PIO  0xff0      /* DIOR/DIOW pulsewidth */
+#define                    T4_REG  0xf000     /* DIOW data hold */
+
+/* Bit masks for ATAPI_PIO_TIM_1 */
+
+#define              TEOC_REG_PIO  0xff       /* End of cycle time for PIO access transfers. */
+
+/* Bit masks for ATAPI_MULTI_TIM_0 */
+
+#define                        TD  0xff       /* DIOR/DIOW asserted pulsewidth */
+#define                        TM  0xff00     /* Time from address valid to DIOR/DIOW */
+
+/* Bit masks for ATAPI_MULTI_TIM_1 */
+
+#define                       TKW  0xff       /* Selects DIOW negated pulsewidth */
+#define                       TKR  0xff00     /* Selects DIOR negated pulsewidth */
+
+/* Bit masks for ATAPI_MULTI_TIM_2 */
+
+#define                        TH  0xff       /* Selects DIOW data hold */
+#define                      TEOC  0xff00     /* Selects end of cycle for DMA */
+
+/* Bit masks for ATAPI_ULTRA_TIM_0 */
+
+#define                      TACK  0xff       /* Selects setup and hold times for TACK */
+#define                      TENV  0xff00     /* Selects envelope time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_1 */
+
+#define                      TDVS  0xff       /* Selects data valid setup time */
+#define                 TCYC_TDVS  0xff00     /* Selects cycle time - TDVS time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_2 */
+
+#define                       TSS  0xff       /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
+#define                      TMLI  0xff00     /* Selects interlock time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_3 */
+
+#define                      TZAH  0xff       /* Selects minimum delay required for output */
+#define               READY_PAUSE  0xff00     /* Selects ready to pause */
+
+/* Bit masks for USB_FADDR */
+
+#define          FUNCTION_ADDRESS  0x7f       /* Function address */
+
+/* Bit masks for USB_POWER */
+
+#define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
+#define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
+#define               RESUME_MODE  0x4        /* DMA Mode */
+#define                     RESET  0x8        /* Reset indicator */
+#define                   HS_MODE  0x10       /* High Speed mode indicator */
+#define                 HS_ENABLE  0x20       /* high Speed Enable */
+#define                 SOFT_CONN  0x40       /* Soft connect */
+#define                ISO_UPDATE  0x80       /* Isochronous update */
+
+/* Bit masks for USB_INTRTX */
+
+#define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
+#define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
+#define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
+#define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
+#define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
+#define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
+#define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
+#define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRRX */
+
+#define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
+#define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
+#define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
+#define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
+#define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
+#define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
+#define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRTXE */
+
+#define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
+#define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
+#define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
+#define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
+#define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
+#define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
+#define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
+#define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
+
+/* Bit masks for USB_INTRRXE */
+
+#define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
+#define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
+#define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
+#define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
+#define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
+#define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
+#define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
+
+/* Bit masks for USB_INTRUSB */
+
+#define                 SUSPEND_B  0x1        /* Suspend indicator */
+#define                  RESUME_B  0x2        /* Resume indicator */
+#define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
+#define                     SOF_B  0x8        /* Start of frame */
+#define                    CONN_B  0x10       /* Connection indicator */
+#define                  DISCON_B  0x20       /* Disconnect indicator */
+#define             SESSION_REQ_B  0x40       /* Session Request */
+#define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
+
+/* Bit masks for USB_INTRUSBE */
+
+#define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
+#define                 RESUME_BE  0x2        /* Resume indicator int enable */
+#define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
+#define                    SOF_BE  0x8        /* Start of frame int enable */
+#define                   CONN_BE  0x10       /* Connection indicator int enable */
+#define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
+#define            SESSION_REQ_BE  0x40       /* Session Request int enable */
+#define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
+
+/* Bit masks for USB_FRAME */
+
+#define              FRAME_NUMBER  0x7ff      /* Frame number */
+
+/* Bit masks for USB_INDEX */
+
+#define         SELECTED_ENDPOINT  0xf        /* selected endpoint */
+
+/* Bit masks for USB_GLOBAL_CTL */
+
+#define                GLOBAL_ENA  0x1        /* enables USB module */
+#define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
+#define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
+#define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
+#define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
+#define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
+#define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
+#define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
+#define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
+#define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
+#define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
+#define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
+#define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
+#define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
+#define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
+
+/* Bit masks for USB_OTG_DEV_CTL */
+
+#define                   SESSION  0x1        /* session indicator */
+#define                  HOST_REQ  0x2        /* Host negotiation request */
+#define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
+#define                     VBUS0  0x8        /* Vbus level indicator[0] */
+#define                     VBUS1  0x10       /* Vbus level indicator[1] */
+#define                     LSDEV  0x20       /* Low-speed indicator */
+#define                     FSDEV  0x40       /* Full or High-speed indicator */
+#define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
+
+/* Bit masks for USB_OTG_VBUS_IRQ */
+
+#define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
+#define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
+#define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
+#define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
+#define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
+#define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
+
+/* Bit masks for USB_OTG_VBUS_MASK */
+
+#define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
+#define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
+#define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
+#define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
+#define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
+#define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
+
+/* Bit masks for USB_CSR0 */
+
+#define                  RXPKTRDY  0x1        /* data packet receive indicator */
+#define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
+#define                STALL_SENT  0x4        /* STALL handshake sent */
+#define                   DATAEND  0x8        /* Data end indicator */
+#define                  SETUPEND  0x10       /* Setup end */
+#define                 SENDSTALL  0x20       /* Send STALL handshake */
+#define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
+#define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
+#define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
+#define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
+#define                SETUPPKT_H  0x8        /* send Setup token host mode */
+#define                   ERROR_H  0x10       /* timeout error indicator host mode */
+#define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
+#define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
+#define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
+
+/* Bit masks for USB_COUNT0 */
+
+#define              EP0_RX_COUNT  0x7f       /* number of received bytes in EP0 FIFO */
+
+/* Bit masks for USB_NAKLIMIT0 */
+
+#define             EP0_NAK_LIMIT  0x1f       /* number of frames/micro frames after which EP0 timeouts */
+
+/* Bit masks for USB_TX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_T  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_RX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_R  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_TXCSR */
+
+#define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
+#define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
+#define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
+#define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
+#define              STALL_SEND_T  0x10       /* issue a Stall handshake */
+#define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
+#define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
+#define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
+#define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
+#define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
+#define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
+#define                     ISO_T  0x4000     /* enable Isochronous transfers */
+#define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
+#define                  ERROR_TH  0x4        /* error condition host mode */
+#define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
+#define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
+
+/* Bit masks for USB_TXCOUNT */
+
+#define                  TX_COUNT  0x1fff     /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* Bit masks for USB_RXCSR */
+
+#define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
+#define               FIFO_FULL_R  0x2        /* FIFO not empty */
+#define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
+#define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
+#define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
+#define              STALL_SEND_R  0x20       /* issue a Stall handshake */
+#define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
+#define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
+#define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
+#define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
+#define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
+#define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
+#define                     ISO_R  0x4000     /* enable Isochronous transfers */
+#define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
+#define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
+#define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
+#define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
+#define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
+#define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
+#define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
+
+/* Bit masks for USB_RXCOUNT */
+
+#define                  RX_COUNT  0x1fff     /* Number of received bytes in the packet in the Rx FIFO */
+
+/* Bit masks for USB_TXTYPE */
+
+#define            TARGET_EP_NO_T  0xf        /* EP number */
+#define                PROTOCOL_T  0xc        /* transfer type */
+
+/* Bit masks for USB_TXINTERVAL */
+
+#define          TX_POLL_INTERVAL  0xff       /* polling interval for selected Tx EP */
+
+/* Bit masks for USB_RXTYPE */
+
+#define            TARGET_EP_NO_R  0xf        /* EP number */
+#define                PROTOCOL_R  0xc        /* transfer type */
+
+/* Bit masks for USB_RXINTERVAL */
+
+#define          RX_POLL_INTERVAL  0xff       /* polling interval for selected Rx EP */
+
+/* Bit masks for USB_DMA_INTERRUPT */
+
+#define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
+#define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
+#define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
+#define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
+#define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
+#define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
+#define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
+#define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
+
+/* Bit masks for USB_DMAxCONTROL */
+
+#define                   DMA_ENA  0x1        /* DMA enable */
+#define                 DIRECTION  0x2        /* direction of DMA transfer */
+#define                      MODE  0x4        /* DMA Bus error */
+#define                   INT_ENA  0x8        /* Interrupt enable */
+#define                     EPNUM  0xf0       /* EP number */
+#define                  BUSERROR  0x100      /* DMA Bus error */
+
+/* Bit masks for USB_DMAxADDRHIGH */
+
+#define             DMA_ADDR_HIGH  0xffff     /* Upper 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxADDRLOW */
+
+#define              DMA_ADDR_LOW  0xffff     /* Lower 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTHIGH */
+
+#define            DMA_COUNT_HIGH  0xffff     /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTLOW */
+
+#define             DMA_COUNT_LOW  0xffff     /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
+
+
+/* ******************************************* */
+/*     MULTI BIT MACRO ENUMERATIONS            */
+/* ******************************************* */
+
+
+#endif /* _DEF_BF542_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF544.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF544.h
new file mode 100644
index 0000000..018ebfc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -0,0 +1,630 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF544_H
+#define _DEF_BF544_H
+
+/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
+#include "defBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF544 that are not in the common header */
+
+/* Timer Registers */
+
+#define                    TIMER8_CONFIG  0xffc00600   /* Timer 8 Configuration Register */
+#define                   TIMER8_COUNTER  0xffc00604   /* Timer 8 Counter Register */
+#define                    TIMER8_PERIOD  0xffc00608   /* Timer 8 Period Register */
+#define                     TIMER8_WIDTH  0xffc0060c   /* Timer 8 Width Register */
+#define                    TIMER9_CONFIG  0xffc00610   /* Timer 9 Configuration Register */
+#define                   TIMER9_COUNTER  0xffc00614   /* Timer 9 Counter Register */
+#define                    TIMER9_PERIOD  0xffc00618   /* Timer 9 Period Register */
+#define                     TIMER9_WIDTH  0xffc0061c   /* Timer 9 Width Register */
+#define                   TIMER10_CONFIG  0xffc00620   /* Timer 10 Configuration Register */
+#define                  TIMER10_COUNTER  0xffc00624   /* Timer 10 Counter Register */
+#define                   TIMER10_PERIOD  0xffc00628   /* Timer 10 Period Register */
+#define                    TIMER10_WIDTH  0xffc0062c   /* Timer 10 Width Register */
+
+/* Timer Group of 3 Registers */
+
+#define                    TIMER_ENABLE1  0xffc00640   /* Timer Group of 3 Enable Register */
+#define                   TIMER_DISABLE1  0xffc00644   /* Timer Group of 3 Disable Register */
+#define                    TIMER_STATUS1  0xffc00648   /* Timer Group of 3 Status Register */
+
+/* EPPI0 Registers */
+
+#define                     EPPI0_STATUS  0xffc01000   /* EPPI0 Status Register */
+#define                     EPPI0_HCOUNT  0xffc01004   /* EPPI0 Horizontal Transfer Count Register */
+#define                     EPPI0_HDELAY  0xffc01008   /* EPPI0 Horizontal Delay Count Register */
+#define                     EPPI0_VCOUNT  0xffc0100c   /* EPPI0 Vertical Transfer Count Register */
+#define                     EPPI0_VDELAY  0xffc01010   /* EPPI0 Vertical Delay Count Register */
+#define                      EPPI0_FRAME  0xffc01014   /* EPPI0 Lines per Frame Register */
+#define                       EPPI0_LINE  0xffc01018   /* EPPI0 Samples per Line Register */
+#define                     EPPI0_CLKDIV  0xffc0101c   /* EPPI0 Clock Divide Register */
+#define                    EPPI0_CONTROL  0xffc01020   /* EPPI0 Control Register */
+#define                   EPPI0_FS1W_HBL  0xffc01024   /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */
+#define                  EPPI0_FS1P_AVPL  0xffc01028   /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */
+#define                   EPPI0_FS2W_LVB  0xffc0102c   /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */
+#define                  EPPI0_FS2P_LAVF  0xffc01030   /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */
+#define                       EPPI0_CLIP  0xffc01034   /* EPPI0 Clipping Register */
+
+/* Two Wire Interface Registers (TWI1) */
+
+#define                     TWI1_REGBASE  0xffc02200
+#define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
+#define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
+#define                   TWI1_SLAVE_CTL  0xffc02208   /* TWI Slave Mode Control Register */
+#define                  TWI1_SLAVE_STAT  0xffc0220c   /* TWI Slave Mode Status Register */
+#define                  TWI1_SLAVE_ADDR  0xffc02210   /* TWI Slave Mode Address Register */
+#define                  TWI1_MASTER_CTL  0xffc02214   /* TWI Master Mode Control Register */
+#define                 TWI1_MASTER_STAT  0xffc02218   /* TWI Master Mode Status Register */
+#define                 TWI1_MASTER_ADDR  0xffc0221c   /* TWI Master Mode Address Register */
+#define                    TWI1_INT_STAT  0xffc02220   /* TWI Interrupt Status Register */
+#define                    TWI1_INT_MASK  0xffc02224   /* TWI Interrupt Mask Register */
+#define                    TWI1_FIFO_CTL  0xffc02228   /* TWI FIFO Control Register */
+#define                   TWI1_FIFO_STAT  0xffc0222c   /* TWI FIFO Status Register */
+#define                   TWI1_XMT_DATA8  0xffc02280   /* TWI FIFO Transmit Data Single Byte Register */
+#define                  TWI1_XMT_DATA16  0xffc02284   /* TWI FIFO Transmit Data Double Byte Register */
+#define                   TWI1_RCV_DATA8  0xffc02288   /* TWI FIFO Receive Data Single Byte Register */
+#define                  TWI1_RCV_DATA16  0xffc0228c   /* TWI FIFO Receive Data Double Byte Register */
+
+/* CAN Controller 1 Config 1 Registers */
+
+#define                         CAN1_MC1  0xffc03200   /* CAN Controller 1 Mailbox Configuration Register 1 */
+#define                         CAN1_MD1  0xffc03204   /* CAN Controller 1 Mailbox Direction Register 1 */
+#define                        CAN1_TRS1  0xffc03208   /* CAN Controller 1 Transmit Request Set Register 1 */
+#define                        CAN1_TRR1  0xffc0320c   /* CAN Controller 1 Transmit Request Reset Register 1 */
+#define                         CAN1_TA1  0xffc03210   /* CAN Controller 1 Transmit Acknowledge Register 1 */
+#define                         CAN1_AA1  0xffc03214   /* CAN Controller 1 Abort Acknowledge Register 1 */
+#define                        CAN1_RMP1  0xffc03218   /* CAN Controller 1 Receive Message Pending Register 1 */
+#define                        CAN1_RML1  0xffc0321c   /* CAN Controller 1 Receive Message Lost Register 1 */
+#define                      CAN1_MBTIF1  0xffc03220   /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */
+#define                      CAN1_MBRIF1  0xffc03224   /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */
+#define                       CAN1_MBIM1  0xffc03228   /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */
+#define                        CAN1_RFH1  0xffc0322c   /* CAN Controller 1 Remote Frame Handling Enable Register 1 */
+#define                       CAN1_OPSS1  0xffc03230   /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */
+
+/* CAN Controller 1 Config 2 Registers */
+
+#define                         CAN1_MC2  0xffc03240   /* CAN Controller 1 Mailbox Configuration Register 2 */
+#define                         CAN1_MD2  0xffc03244   /* CAN Controller 1 Mailbox Direction Register 2 */
+#define                        CAN1_TRS2  0xffc03248   /* CAN Controller 1 Transmit Request Set Register 2 */
+#define                        CAN1_TRR2  0xffc0324c   /* CAN Controller 1 Transmit Request Reset Register 2 */
+#define                         CAN1_TA2  0xffc03250   /* CAN Controller 1 Transmit Acknowledge Register 2 */
+#define                         CAN1_AA2  0xffc03254   /* CAN Controller 1 Abort Acknowledge Register 2 */
+#define                        CAN1_RMP2  0xffc03258   /* CAN Controller 1 Receive Message Pending Register 2 */
+#define                        CAN1_RML2  0xffc0325c   /* CAN Controller 1 Receive Message Lost Register 2 */
+#define                      CAN1_MBTIF2  0xffc03260   /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */
+#define                      CAN1_MBRIF2  0xffc03264   /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */
+#define                       CAN1_MBIM2  0xffc03268   /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */
+#define                        CAN1_RFH2  0xffc0326c   /* CAN Controller 1 Remote Frame Handling Enable Register 2 */
+#define                       CAN1_OPSS2  0xffc03270   /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */
+
+/* CAN Controller 1 Clock/Interrupt/Counter Registers */
+
+#define                       CAN1_CLOCK  0xffc03280   /* CAN Controller 1 Clock Register */
+#define                      CAN1_TIMING  0xffc03284   /* CAN Controller 1 Timing Register */
+#define                       CAN1_DEBUG  0xffc03288   /* CAN Controller 1 Debug Register */
+#define                      CAN1_STATUS  0xffc0328c   /* CAN Controller 1 Global Status Register */
+#define                         CAN1_CEC  0xffc03290   /* CAN Controller 1 Error Counter Register */
+#define                         CAN1_GIS  0xffc03294   /* CAN Controller 1 Global Interrupt Status Register */
+#define                         CAN1_GIM  0xffc03298   /* CAN Controller 1 Global Interrupt Mask Register */
+#define                         CAN1_GIF  0xffc0329c   /* CAN Controller 1 Global Interrupt Flag Register */
+#define                     CAN1_CONTROL  0xffc032a0   /* CAN Controller 1 Master Control Register */
+#define                        CAN1_INTR  0xffc032a4   /* CAN Controller 1 Interrupt Pending Register */
+#define                        CAN1_MBTD  0xffc032ac   /* CAN Controller 1 Mailbox Temporary Disable Register */
+#define                         CAN1_EWR  0xffc032b0   /* CAN Controller 1 Programmable Warning Level Register */
+#define                         CAN1_ESR  0xffc032b4   /* CAN Controller 1 Error Status Register */
+#define                       CAN1_UCCNT  0xffc032c4   /* CAN Controller 1 Universal Counter Register */
+#define                        CAN1_UCRC  0xffc032c8   /* CAN Controller 1 Universal Counter Force Reload Register */
+#define                       CAN1_UCCNF  0xffc032cc   /* CAN Controller 1 Universal Counter Configuration Register */
+
+/* CAN Controller 1 Mailbox Acceptance Registers */
+
+#define                       CAN1_AM00L  0xffc03300   /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */
+#define                       CAN1_AM00H  0xffc03304   /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */
+#define                       CAN1_AM01L  0xffc03308   /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */
+#define                       CAN1_AM01H  0xffc0330c   /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */
+#define                       CAN1_AM02L  0xffc03310   /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */
+#define                       CAN1_AM02H  0xffc03314   /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */
+#define                       CAN1_AM03L  0xffc03318   /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */
+#define                       CAN1_AM03H  0xffc0331c   /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */
+#define                       CAN1_AM04L  0xffc03320   /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */
+#define                       CAN1_AM04H  0xffc03324   /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */
+#define                       CAN1_AM05L  0xffc03328   /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */
+#define                       CAN1_AM05H  0xffc0332c   /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */
+#define                       CAN1_AM06L  0xffc03330   /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */
+#define                       CAN1_AM06H  0xffc03334   /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */
+#define                       CAN1_AM07L  0xffc03338   /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */
+#define                       CAN1_AM07H  0xffc0333c   /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */
+#define                       CAN1_AM08L  0xffc03340   /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */
+#define                       CAN1_AM08H  0xffc03344   /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */
+#define                       CAN1_AM09L  0xffc03348   /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */
+#define                       CAN1_AM09H  0xffc0334c   /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */
+#define                       CAN1_AM10L  0xffc03350   /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */
+#define                       CAN1_AM10H  0xffc03354   /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */
+#define                       CAN1_AM11L  0xffc03358   /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */
+#define                       CAN1_AM11H  0xffc0335c   /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */
+#define                       CAN1_AM12L  0xffc03360   /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */
+#define                       CAN1_AM12H  0xffc03364   /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */
+#define                       CAN1_AM13L  0xffc03368   /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */
+#define                       CAN1_AM13H  0xffc0336c   /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */
+#define                       CAN1_AM14L  0xffc03370   /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */
+#define                       CAN1_AM14H  0xffc03374   /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */
+#define                       CAN1_AM15L  0xffc03378   /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */
+#define                       CAN1_AM15H  0xffc0337c   /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */
+
+/* CAN Controller 1 Mailbox Acceptance Registers */
+
+#define                       CAN1_AM16L  0xffc03380   /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */
+#define                       CAN1_AM16H  0xffc03384   /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */
+#define                       CAN1_AM17L  0xffc03388   /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */
+#define                       CAN1_AM17H  0xffc0338c   /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */
+#define                       CAN1_AM18L  0xffc03390   /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */
+#define                       CAN1_AM18H  0xffc03394   /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */
+#define                       CAN1_AM19L  0xffc03398   /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */
+#define                       CAN1_AM19H  0xffc0339c   /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */
+#define                       CAN1_AM20L  0xffc033a0   /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */
+#define                       CAN1_AM20H  0xffc033a4   /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */
+#define                       CAN1_AM21L  0xffc033a8   /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */
+#define                       CAN1_AM21H  0xffc033ac   /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */
+#define                       CAN1_AM22L  0xffc033b0   /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */
+#define                       CAN1_AM22H  0xffc033b4   /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */
+#define                       CAN1_AM23L  0xffc033b8   /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */
+#define                       CAN1_AM23H  0xffc033bc   /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */
+#define                       CAN1_AM24L  0xffc033c0   /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */
+#define                       CAN1_AM24H  0xffc033c4   /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */
+#define                       CAN1_AM25L  0xffc033c8   /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */
+#define                       CAN1_AM25H  0xffc033cc   /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */
+#define                       CAN1_AM26L  0xffc033d0   /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */
+#define                       CAN1_AM26H  0xffc033d4   /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */
+#define                       CAN1_AM27L  0xffc033d8   /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */
+#define                       CAN1_AM27H  0xffc033dc   /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */
+#define                       CAN1_AM28L  0xffc033e0   /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */
+#define                       CAN1_AM28H  0xffc033e4   /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */
+#define                       CAN1_AM29L  0xffc033e8   /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */
+#define                       CAN1_AM29H  0xffc033ec   /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */
+#define                       CAN1_AM30L  0xffc033f0   /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */
+#define                       CAN1_AM30H  0xffc033f4   /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */
+#define                       CAN1_AM31L  0xffc033f8   /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */
+#define                       CAN1_AM31H  0xffc033fc   /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define                  CAN1_MB00_DATA0  0xffc03400   /* CAN Controller 1 Mailbox 0 Data 0 Register */
+#define                  CAN1_MB00_DATA1  0xffc03404   /* CAN Controller 1 Mailbox 0 Data 1 Register */
+#define                  CAN1_MB00_DATA2  0xffc03408   /* CAN Controller 1 Mailbox 0 Data 2 Register */
+#define                  CAN1_MB00_DATA3  0xffc0340c   /* CAN Controller 1 Mailbox 0 Data 3 Register */
+#define                 CAN1_MB00_LENGTH  0xffc03410   /* CAN Controller 1 Mailbox 0 Length Register */
+#define              CAN1_MB00_TIMESTAMP  0xffc03414   /* CAN Controller 1 Mailbox 0 Timestamp Register */
+#define                    CAN1_MB00_ID0  0xffc03418   /* CAN Controller 1 Mailbox 0 ID0 Register */
+#define                    CAN1_MB00_ID1  0xffc0341c   /* CAN Controller 1 Mailbox 0 ID1 Register */
+#define                  CAN1_MB01_DATA0  0xffc03420   /* CAN Controller 1 Mailbox 1 Data 0 Register */
+#define                  CAN1_MB01_DATA1  0xffc03424   /* CAN Controller 1 Mailbox 1 Data 1 Register */
+#define                  CAN1_MB01_DATA2  0xffc03428   /* CAN Controller 1 Mailbox 1 Data 2 Register */
+#define                  CAN1_MB01_DATA3  0xffc0342c   /* CAN Controller 1 Mailbox 1 Data 3 Register */
+#define                 CAN1_MB01_LENGTH  0xffc03430   /* CAN Controller 1 Mailbox 1 Length Register */
+#define              CAN1_MB01_TIMESTAMP  0xffc03434   /* CAN Controller 1 Mailbox 1 Timestamp Register */
+#define                    CAN1_MB01_ID0  0xffc03438   /* CAN Controller 1 Mailbox 1 ID0 Register */
+#define                    CAN1_MB01_ID1  0xffc0343c   /* CAN Controller 1 Mailbox 1 ID1 Register */
+#define                  CAN1_MB02_DATA0  0xffc03440   /* CAN Controller 1 Mailbox 2 Data 0 Register */
+#define                  CAN1_MB02_DATA1  0xffc03444   /* CAN Controller 1 Mailbox 2 Data 1 Register */
+#define                  CAN1_MB02_DATA2  0xffc03448   /* CAN Controller 1 Mailbox 2 Data 2 Register */
+#define                  CAN1_MB02_DATA3  0xffc0344c   /* CAN Controller 1 Mailbox 2 Data 3 Register */
+#define                 CAN1_MB02_LENGTH  0xffc03450   /* CAN Controller 1 Mailbox 2 Length Register */
+#define              CAN1_MB02_TIMESTAMP  0xffc03454   /* CAN Controller 1 Mailbox 2 Timestamp Register */
+#define                    CAN1_MB02_ID0  0xffc03458   /* CAN Controller 1 Mailbox 2 ID0 Register */
+#define                    CAN1_MB02_ID1  0xffc0345c   /* CAN Controller 1 Mailbox 2 ID1 Register */
+#define                  CAN1_MB03_DATA0  0xffc03460   /* CAN Controller 1 Mailbox 3 Data 0 Register */
+#define                  CAN1_MB03_DATA1  0xffc03464   /* CAN Controller 1 Mailbox 3 Data 1 Register */
+#define                  CAN1_MB03_DATA2  0xffc03468   /* CAN Controller 1 Mailbox 3 Data 2 Register */
+#define                  CAN1_MB03_DATA3  0xffc0346c   /* CAN Controller 1 Mailbox 3 Data 3 Register */
+#define                 CAN1_MB03_LENGTH  0xffc03470   /* CAN Controller 1 Mailbox 3 Length Register */
+#define              CAN1_MB03_TIMESTAMP  0xffc03474   /* CAN Controller 1 Mailbox 3 Timestamp Register */
+#define                    CAN1_MB03_ID0  0xffc03478   /* CAN Controller 1 Mailbox 3 ID0 Register */
+#define                    CAN1_MB03_ID1  0xffc0347c   /* CAN Controller 1 Mailbox 3 ID1 Register */
+#define                  CAN1_MB04_DATA0  0xffc03480   /* CAN Controller 1 Mailbox 4 Data 0 Register */
+#define                  CAN1_MB04_DATA1  0xffc03484   /* CAN Controller 1 Mailbox 4 Data 1 Register */
+#define                  CAN1_MB04_DATA2  0xffc03488   /* CAN Controller 1 Mailbox 4 Data 2 Register */
+#define                  CAN1_MB04_DATA3  0xffc0348c   /* CAN Controller 1 Mailbox 4 Data 3 Register */
+#define                 CAN1_MB04_LENGTH  0xffc03490   /* CAN Controller 1 Mailbox 4 Length Register */
+#define              CAN1_MB04_TIMESTAMP  0xffc03494   /* CAN Controller 1 Mailbox 4 Timestamp Register */
+#define                    CAN1_MB04_ID0  0xffc03498   /* CAN Controller 1 Mailbox 4 ID0 Register */
+#define                    CAN1_MB04_ID1  0xffc0349c   /* CAN Controller 1 Mailbox 4 ID1 Register */
+#define                  CAN1_MB05_DATA0  0xffc034a0   /* CAN Controller 1 Mailbox 5 Data 0 Register */
+#define                  CAN1_MB05_DATA1  0xffc034a4   /* CAN Controller 1 Mailbox 5 Data 1 Register */
+#define                  CAN1_MB05_DATA2  0xffc034a8   /* CAN Controller 1 Mailbox 5 Data 2 Register */
+#define                  CAN1_MB05_DATA3  0xffc034ac   /* CAN Controller 1 Mailbox 5 Data 3 Register */
+#define                 CAN1_MB05_LENGTH  0xffc034b0   /* CAN Controller 1 Mailbox 5 Length Register */
+#define              CAN1_MB05_TIMESTAMP  0xffc034b4   /* CAN Controller 1 Mailbox 5 Timestamp Register */
+#define                    CAN1_MB05_ID0  0xffc034b8   /* CAN Controller 1 Mailbox 5 ID0 Register */
+#define                    CAN1_MB05_ID1  0xffc034bc   /* CAN Controller 1 Mailbox 5 ID1 Register */
+#define                  CAN1_MB06_DATA0  0xffc034c0   /* CAN Controller 1 Mailbox 6 Data 0 Register */
+#define                  CAN1_MB06_DATA1  0xffc034c4   /* CAN Controller 1 Mailbox 6 Data 1 Register */
+#define                  CAN1_MB06_DATA2  0xffc034c8   /* CAN Controller 1 Mailbox 6 Data 2 Register */
+#define                  CAN1_MB06_DATA3  0xffc034cc   /* CAN Controller 1 Mailbox 6 Data 3 Register */
+#define                 CAN1_MB06_LENGTH  0xffc034d0   /* CAN Controller 1 Mailbox 6 Length Register */
+#define              CAN1_MB06_TIMESTAMP  0xffc034d4   /* CAN Controller 1 Mailbox 6 Timestamp Register */
+#define                    CAN1_MB06_ID0  0xffc034d8   /* CAN Controller 1 Mailbox 6 ID0 Register */
+#define                    CAN1_MB06_ID1  0xffc034dc   /* CAN Controller 1 Mailbox 6 ID1 Register */
+#define                  CAN1_MB07_DATA0  0xffc034e0   /* CAN Controller 1 Mailbox 7 Data 0 Register */
+#define                  CAN1_MB07_DATA1  0xffc034e4   /* CAN Controller 1 Mailbox 7 Data 1 Register */
+#define                  CAN1_MB07_DATA2  0xffc034e8   /* CAN Controller 1 Mailbox 7 Data 2 Register */
+#define                  CAN1_MB07_DATA3  0xffc034ec   /* CAN Controller 1 Mailbox 7 Data 3 Register */
+#define                 CAN1_MB07_LENGTH  0xffc034f0   /* CAN Controller 1 Mailbox 7 Length Register */
+#define              CAN1_MB07_TIMESTAMP  0xffc034f4   /* CAN Controller 1 Mailbox 7 Timestamp Register */
+#define                    CAN1_MB07_ID0  0xffc034f8   /* CAN Controller 1 Mailbox 7 ID0 Register */
+#define                    CAN1_MB07_ID1  0xffc034fc   /* CAN Controller 1 Mailbox 7 ID1 Register */
+#define                  CAN1_MB08_DATA0  0xffc03500   /* CAN Controller 1 Mailbox 8 Data 0 Register */
+#define                  CAN1_MB08_DATA1  0xffc03504   /* CAN Controller 1 Mailbox 8 Data 1 Register */
+#define                  CAN1_MB08_DATA2  0xffc03508   /* CAN Controller 1 Mailbox 8 Data 2 Register */
+#define                  CAN1_MB08_DATA3  0xffc0350c   /* CAN Controller 1 Mailbox 8 Data 3 Register */
+#define                 CAN1_MB08_LENGTH  0xffc03510   /* CAN Controller 1 Mailbox 8 Length Register */
+#define              CAN1_MB08_TIMESTAMP  0xffc03514   /* CAN Controller 1 Mailbox 8 Timestamp Register */
+#define                    CAN1_MB08_ID0  0xffc03518   /* CAN Controller 1 Mailbox 8 ID0 Register */
+#define                    CAN1_MB08_ID1  0xffc0351c   /* CAN Controller 1 Mailbox 8 ID1 Register */
+#define                  CAN1_MB09_DATA0  0xffc03520   /* CAN Controller 1 Mailbox 9 Data 0 Register */
+#define                  CAN1_MB09_DATA1  0xffc03524   /* CAN Controller 1 Mailbox 9 Data 1 Register */
+#define                  CAN1_MB09_DATA2  0xffc03528   /* CAN Controller 1 Mailbox 9 Data 2 Register */
+#define                  CAN1_MB09_DATA3  0xffc0352c   /* CAN Controller 1 Mailbox 9 Data 3 Register */
+#define                 CAN1_MB09_LENGTH  0xffc03530   /* CAN Controller 1 Mailbox 9 Length Register */
+#define              CAN1_MB09_TIMESTAMP  0xffc03534   /* CAN Controller 1 Mailbox 9 Timestamp Register */
+#define                    CAN1_MB09_ID0  0xffc03538   /* CAN Controller 1 Mailbox 9 ID0 Register */
+#define                    CAN1_MB09_ID1  0xffc0353c   /* CAN Controller 1 Mailbox 9 ID1 Register */
+#define                  CAN1_MB10_DATA0  0xffc03540   /* CAN Controller 1 Mailbox 10 Data 0 Register */
+#define                  CAN1_MB10_DATA1  0xffc03544   /* CAN Controller 1 Mailbox 10 Data 1 Register */
+#define                  CAN1_MB10_DATA2  0xffc03548   /* CAN Controller 1 Mailbox 10 Data 2 Register */
+#define                  CAN1_MB10_DATA3  0xffc0354c   /* CAN Controller 1 Mailbox 10 Data 3 Register */
+#define                 CAN1_MB10_LENGTH  0xffc03550   /* CAN Controller 1 Mailbox 10 Length Register */
+#define              CAN1_MB10_TIMESTAMP  0xffc03554   /* CAN Controller 1 Mailbox 10 Timestamp Register */
+#define                    CAN1_MB10_ID0  0xffc03558   /* CAN Controller 1 Mailbox 10 ID0 Register */
+#define                    CAN1_MB10_ID1  0xffc0355c   /* CAN Controller 1 Mailbox 10 ID1 Register */
+#define                  CAN1_MB11_DATA0  0xffc03560   /* CAN Controller 1 Mailbox 11 Data 0 Register */
+#define                  CAN1_MB11_DATA1  0xffc03564   /* CAN Controller 1 Mailbox 11 Data 1 Register */
+#define                  CAN1_MB11_DATA2  0xffc03568   /* CAN Controller 1 Mailbox 11 Data 2 Register */
+#define                  CAN1_MB11_DATA3  0xffc0356c   /* CAN Controller 1 Mailbox 11 Data 3 Register */
+#define                 CAN1_MB11_LENGTH  0xffc03570   /* CAN Controller 1 Mailbox 11 Length Register */
+#define              CAN1_MB11_TIMESTAMP  0xffc03574   /* CAN Controller 1 Mailbox 11 Timestamp Register */
+#define                    CAN1_MB11_ID0  0xffc03578   /* CAN Controller 1 Mailbox 11 ID0 Register */
+#define                    CAN1_MB11_ID1  0xffc0357c   /* CAN Controller 1 Mailbox 11 ID1 Register */
+#define                  CAN1_MB12_DATA0  0xffc03580   /* CAN Controller 1 Mailbox 12 Data 0 Register */
+#define                  CAN1_MB12_DATA1  0xffc03584   /* CAN Controller 1 Mailbox 12 Data 1 Register */
+#define                  CAN1_MB12_DATA2  0xffc03588   /* CAN Controller 1 Mailbox 12 Data 2 Register */
+#define                  CAN1_MB12_DATA3  0xffc0358c   /* CAN Controller 1 Mailbox 12 Data 3 Register */
+#define                 CAN1_MB12_LENGTH  0xffc03590   /* CAN Controller 1 Mailbox 12 Length Register */
+#define              CAN1_MB12_TIMESTAMP  0xffc03594   /* CAN Controller 1 Mailbox 12 Timestamp Register */
+#define                    CAN1_MB12_ID0  0xffc03598   /* CAN Controller 1 Mailbox 12 ID0 Register */
+#define                    CAN1_MB12_ID1  0xffc0359c   /* CAN Controller 1 Mailbox 12 ID1 Register */
+#define                  CAN1_MB13_DATA0  0xffc035a0   /* CAN Controller 1 Mailbox 13 Data 0 Register */
+#define                  CAN1_MB13_DATA1  0xffc035a4   /* CAN Controller 1 Mailbox 13 Data 1 Register */
+#define                  CAN1_MB13_DATA2  0xffc035a8   /* CAN Controller 1 Mailbox 13 Data 2 Register */
+#define                  CAN1_MB13_DATA3  0xffc035ac   /* CAN Controller 1 Mailbox 13 Data 3 Register */
+#define                 CAN1_MB13_LENGTH  0xffc035b0   /* CAN Controller 1 Mailbox 13 Length Register */
+#define              CAN1_MB13_TIMESTAMP  0xffc035b4   /* CAN Controller 1 Mailbox 13 Timestamp Register */
+#define                    CAN1_MB13_ID0  0xffc035b8   /* CAN Controller 1 Mailbox 13 ID0 Register */
+#define                    CAN1_MB13_ID1  0xffc035bc   /* CAN Controller 1 Mailbox 13 ID1 Register */
+#define                  CAN1_MB14_DATA0  0xffc035c0   /* CAN Controller 1 Mailbox 14 Data 0 Register */
+#define                  CAN1_MB14_DATA1  0xffc035c4   /* CAN Controller 1 Mailbox 14 Data 1 Register */
+#define                  CAN1_MB14_DATA2  0xffc035c8   /* CAN Controller 1 Mailbox 14 Data 2 Register */
+#define                  CAN1_MB14_DATA3  0xffc035cc   /* CAN Controller 1 Mailbox 14 Data 3 Register */
+#define                 CAN1_MB14_LENGTH  0xffc035d0   /* CAN Controller 1 Mailbox 14 Length Register */
+#define              CAN1_MB14_TIMESTAMP  0xffc035d4   /* CAN Controller 1 Mailbox 14 Timestamp Register */
+#define                    CAN1_MB14_ID0  0xffc035d8   /* CAN Controller 1 Mailbox 14 ID0 Register */
+#define                    CAN1_MB14_ID1  0xffc035dc   /* CAN Controller 1 Mailbox 14 ID1 Register */
+#define                  CAN1_MB15_DATA0  0xffc035e0   /* CAN Controller 1 Mailbox 15 Data 0 Register */
+#define                  CAN1_MB15_DATA1  0xffc035e4   /* CAN Controller 1 Mailbox 15 Data 1 Register */
+#define                  CAN1_MB15_DATA2  0xffc035e8   /* CAN Controller 1 Mailbox 15 Data 2 Register */
+#define                  CAN1_MB15_DATA3  0xffc035ec   /* CAN Controller 1 Mailbox 15 Data 3 Register */
+#define                 CAN1_MB15_LENGTH  0xffc035f0   /* CAN Controller 1 Mailbox 15 Length Register */
+#define              CAN1_MB15_TIMESTAMP  0xffc035f4   /* CAN Controller 1 Mailbox 15 Timestamp Register */
+#define                    CAN1_MB15_ID0  0xffc035f8   /* CAN Controller 1 Mailbox 15 ID0 Register */
+#define                    CAN1_MB15_ID1  0xffc035fc   /* CAN Controller 1 Mailbox 15 ID1 Register */
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define                  CAN1_MB16_DATA0  0xffc03600   /* CAN Controller 1 Mailbox 16 Data 0 Register */
+#define                  CAN1_MB16_DATA1  0xffc03604   /* CAN Controller 1 Mailbox 16 Data 1 Register */
+#define                  CAN1_MB16_DATA2  0xffc03608   /* CAN Controller 1 Mailbox 16 Data 2 Register */
+#define                  CAN1_MB16_DATA3  0xffc0360c   /* CAN Controller 1 Mailbox 16 Data 3 Register */
+#define                 CAN1_MB16_LENGTH  0xffc03610   /* CAN Controller 1 Mailbox 16 Length Register */
+#define              CAN1_MB16_TIMESTAMP  0xffc03614   /* CAN Controller 1 Mailbox 16 Timestamp Register */
+#define                    CAN1_MB16_ID0  0xffc03618   /* CAN Controller 1 Mailbox 16 ID0 Register */
+#define                    CAN1_MB16_ID1  0xffc0361c   /* CAN Controller 1 Mailbox 16 ID1 Register */
+#define                  CAN1_MB17_DATA0  0xffc03620   /* CAN Controller 1 Mailbox 17 Data 0 Register */
+#define                  CAN1_MB17_DATA1  0xffc03624   /* CAN Controller 1 Mailbox 17 Data 1 Register */
+#define                  CAN1_MB17_DATA2  0xffc03628   /* CAN Controller 1 Mailbox 17 Data 2 Register */
+#define                  CAN1_MB17_DATA3  0xffc0362c   /* CAN Controller 1 Mailbox 17 Data 3 Register */
+#define                 CAN1_MB17_LENGTH  0xffc03630   /* CAN Controller 1 Mailbox 17 Length Register */
+#define              CAN1_MB17_TIMESTAMP  0xffc03634   /* CAN Controller 1 Mailbox 17 Timestamp Register */
+#define                    CAN1_MB17_ID0  0xffc03638   /* CAN Controller 1 Mailbox 17 ID0 Register */
+#define                    CAN1_MB17_ID1  0xffc0363c   /* CAN Controller 1 Mailbox 17 ID1 Register */
+#define                  CAN1_MB18_DATA0  0xffc03640   /* CAN Controller 1 Mailbox 18 Data 0 Register */
+#define                  CAN1_MB18_DATA1  0xffc03644   /* CAN Controller 1 Mailbox 18 Data 1 Register */
+#define                  CAN1_MB18_DATA2  0xffc03648   /* CAN Controller 1 Mailbox 18 Data 2 Register */
+#define                  CAN1_MB18_DATA3  0xffc0364c   /* CAN Controller 1 Mailbox 18 Data 3 Register */
+#define                 CAN1_MB18_LENGTH  0xffc03650   /* CAN Controller 1 Mailbox 18 Length Register */
+#define              CAN1_MB18_TIMESTAMP  0xffc03654   /* CAN Controller 1 Mailbox 18 Timestamp Register */
+#define                    CAN1_MB18_ID0  0xffc03658   /* CAN Controller 1 Mailbox 18 ID0 Register */
+#define                    CAN1_MB18_ID1  0xffc0365c   /* CAN Controller 1 Mailbox 18 ID1 Register */
+#define                  CAN1_MB19_DATA0  0xffc03660   /* CAN Controller 1 Mailbox 19 Data 0 Register */
+#define                  CAN1_MB19_DATA1  0xffc03664   /* CAN Controller 1 Mailbox 19 Data 1 Register */
+#define                  CAN1_MB19_DATA2  0xffc03668   /* CAN Controller 1 Mailbox 19 Data 2 Register */
+#define                  CAN1_MB19_DATA3  0xffc0366c   /* CAN Controller 1 Mailbox 19 Data 3 Register */
+#define                 CAN1_MB19_LENGTH  0xffc03670   /* CAN Controller 1 Mailbox 19 Length Register */
+#define              CAN1_MB19_TIMESTAMP  0xffc03674   /* CAN Controller 1 Mailbox 19 Timestamp Register */
+#define                    CAN1_MB19_ID0  0xffc03678   /* CAN Controller 1 Mailbox 19 ID0 Register */
+#define                    CAN1_MB19_ID1  0xffc0367c   /* CAN Controller 1 Mailbox 19 ID1 Register */
+#define                  CAN1_MB20_DATA0  0xffc03680   /* CAN Controller 1 Mailbox 20 Data 0 Register */
+#define                  CAN1_MB20_DATA1  0xffc03684   /* CAN Controller 1 Mailbox 20 Data 1 Register */
+#define                  CAN1_MB20_DATA2  0xffc03688   /* CAN Controller 1 Mailbox 20 Data 2 Register */
+#define                  CAN1_MB20_DATA3  0xffc0368c   /* CAN Controller 1 Mailbox 20 Data 3 Register */
+#define                 CAN1_MB20_LENGTH  0xffc03690   /* CAN Controller 1 Mailbox 20 Length Register */
+#define              CAN1_MB20_TIMESTAMP  0xffc03694   /* CAN Controller 1 Mailbox 20 Timestamp Register */
+#define                    CAN1_MB20_ID0  0xffc03698   /* CAN Controller 1 Mailbox 20 ID0 Register */
+#define                    CAN1_MB20_ID1  0xffc0369c   /* CAN Controller 1 Mailbox 20 ID1 Register */
+#define                  CAN1_MB21_DATA0  0xffc036a0   /* CAN Controller 1 Mailbox 21 Data 0 Register */
+#define                  CAN1_MB21_DATA1  0xffc036a4   /* CAN Controller 1 Mailbox 21 Data 1 Register */
+#define                  CAN1_MB21_DATA2  0xffc036a8   /* CAN Controller 1 Mailbox 21 Data 2 Register */
+#define                  CAN1_MB21_DATA3  0xffc036ac   /* CAN Controller 1 Mailbox 21 Data 3 Register */
+#define                 CAN1_MB21_LENGTH  0xffc036b0   /* CAN Controller 1 Mailbox 21 Length Register */
+#define              CAN1_MB21_TIMESTAMP  0xffc036b4   /* CAN Controller 1 Mailbox 21 Timestamp Register */
+#define                    CAN1_MB21_ID0  0xffc036b8   /* CAN Controller 1 Mailbox 21 ID0 Register */
+#define                    CAN1_MB21_ID1  0xffc036bc   /* CAN Controller 1 Mailbox 21 ID1 Register */
+#define                  CAN1_MB22_DATA0  0xffc036c0   /* CAN Controller 1 Mailbox 22 Data 0 Register */
+#define                  CAN1_MB22_DATA1  0xffc036c4   /* CAN Controller 1 Mailbox 22 Data 1 Register */
+#define                  CAN1_MB22_DATA2  0xffc036c8   /* CAN Controller 1 Mailbox 22 Data 2 Register */
+#define                  CAN1_MB22_DATA3  0xffc036cc   /* CAN Controller 1 Mailbox 22 Data 3 Register */
+#define                 CAN1_MB22_LENGTH  0xffc036d0   /* CAN Controller 1 Mailbox 22 Length Register */
+#define              CAN1_MB22_TIMESTAMP  0xffc036d4   /* CAN Controller 1 Mailbox 22 Timestamp Register */
+#define                    CAN1_MB22_ID0  0xffc036d8   /* CAN Controller 1 Mailbox 22 ID0 Register */
+#define                    CAN1_MB22_ID1  0xffc036dc   /* CAN Controller 1 Mailbox 22 ID1 Register */
+#define                  CAN1_MB23_DATA0  0xffc036e0   /* CAN Controller 1 Mailbox 23 Data 0 Register */
+#define                  CAN1_MB23_DATA1  0xffc036e4   /* CAN Controller 1 Mailbox 23 Data 1 Register */
+#define                  CAN1_MB23_DATA2  0xffc036e8   /* CAN Controller 1 Mailbox 23 Data 2 Register */
+#define                  CAN1_MB23_DATA3  0xffc036ec   /* CAN Controller 1 Mailbox 23 Data 3 Register */
+#define                 CAN1_MB23_LENGTH  0xffc036f0   /* CAN Controller 1 Mailbox 23 Length Register */
+#define              CAN1_MB23_TIMESTAMP  0xffc036f4   /* CAN Controller 1 Mailbox 23 Timestamp Register */
+#define                    CAN1_MB23_ID0  0xffc036f8   /* CAN Controller 1 Mailbox 23 ID0 Register */
+#define                    CAN1_MB23_ID1  0xffc036fc   /* CAN Controller 1 Mailbox 23 ID1 Register */
+#define                  CAN1_MB24_DATA0  0xffc03700   /* CAN Controller 1 Mailbox 24 Data 0 Register */
+#define                  CAN1_MB24_DATA1  0xffc03704   /* CAN Controller 1 Mailbox 24 Data 1 Register */
+#define                  CAN1_MB24_DATA2  0xffc03708   /* CAN Controller 1 Mailbox 24 Data 2 Register */
+#define                  CAN1_MB24_DATA3  0xffc0370c   /* CAN Controller 1 Mailbox 24 Data 3 Register */
+#define                 CAN1_MB24_LENGTH  0xffc03710   /* CAN Controller 1 Mailbox 24 Length Register */
+#define              CAN1_MB24_TIMESTAMP  0xffc03714   /* CAN Controller 1 Mailbox 24 Timestamp Register */
+#define                    CAN1_MB24_ID0  0xffc03718   /* CAN Controller 1 Mailbox 24 ID0 Register */
+#define                    CAN1_MB24_ID1  0xffc0371c   /* CAN Controller 1 Mailbox 24 ID1 Register */
+#define                  CAN1_MB25_DATA0  0xffc03720   /* CAN Controller 1 Mailbox 25 Data 0 Register */
+#define                  CAN1_MB25_DATA1  0xffc03724   /* CAN Controller 1 Mailbox 25 Data 1 Register */
+#define                  CAN1_MB25_DATA2  0xffc03728   /* CAN Controller 1 Mailbox 25 Data 2 Register */
+#define                  CAN1_MB25_DATA3  0xffc0372c   /* CAN Controller 1 Mailbox 25 Data 3 Register */
+#define                 CAN1_MB25_LENGTH  0xffc03730   /* CAN Controller 1 Mailbox 25 Length Register */
+#define              CAN1_MB25_TIMESTAMP  0xffc03734   /* CAN Controller 1 Mailbox 25 Timestamp Register */
+#define                    CAN1_MB25_ID0  0xffc03738   /* CAN Controller 1 Mailbox 25 ID0 Register */
+#define                    CAN1_MB25_ID1  0xffc0373c   /* CAN Controller 1 Mailbox 25 ID1 Register */
+#define                  CAN1_MB26_DATA0  0xffc03740   /* CAN Controller 1 Mailbox 26 Data 0 Register */
+#define                  CAN1_MB26_DATA1  0xffc03744   /* CAN Controller 1 Mailbox 26 Data 1 Register */
+#define                  CAN1_MB26_DATA2  0xffc03748   /* CAN Controller 1 Mailbox 26 Data 2 Register */
+#define                  CAN1_MB26_DATA3  0xffc0374c   /* CAN Controller 1 Mailbox 26 Data 3 Register */
+#define                 CAN1_MB26_LENGTH  0xffc03750   /* CAN Controller 1 Mailbox 26 Length Register */
+#define              CAN1_MB26_TIMESTAMP  0xffc03754   /* CAN Controller 1 Mailbox 26 Timestamp Register */
+#define                    CAN1_MB26_ID0  0xffc03758   /* CAN Controller 1 Mailbox 26 ID0 Register */
+#define                    CAN1_MB26_ID1  0xffc0375c   /* CAN Controller 1 Mailbox 26 ID1 Register */
+#define                  CAN1_MB27_DATA0  0xffc03760   /* CAN Controller 1 Mailbox 27 Data 0 Register */
+#define                  CAN1_MB27_DATA1  0xffc03764   /* CAN Controller 1 Mailbox 27 Data 1 Register */
+#define                  CAN1_MB27_DATA2  0xffc03768   /* CAN Controller 1 Mailbox 27 Data 2 Register */
+#define                  CAN1_MB27_DATA3  0xffc0376c   /* CAN Controller 1 Mailbox 27 Data 3 Register */
+#define                 CAN1_MB27_LENGTH  0xffc03770   /* CAN Controller 1 Mailbox 27 Length Register */
+#define              CAN1_MB27_TIMESTAMP  0xffc03774   /* CAN Controller 1 Mailbox 27 Timestamp Register */
+#define                    CAN1_MB27_ID0  0xffc03778   /* CAN Controller 1 Mailbox 27 ID0 Register */
+#define                    CAN1_MB27_ID1  0xffc0377c   /* CAN Controller 1 Mailbox 27 ID1 Register */
+#define                  CAN1_MB28_DATA0  0xffc03780   /* CAN Controller 1 Mailbox 28 Data 0 Register */
+#define                  CAN1_MB28_DATA1  0xffc03784   /* CAN Controller 1 Mailbox 28 Data 1 Register */
+#define                  CAN1_MB28_DATA2  0xffc03788   /* CAN Controller 1 Mailbox 28 Data 2 Register */
+#define                  CAN1_MB28_DATA3  0xffc0378c   /* CAN Controller 1 Mailbox 28 Data 3 Register */
+#define                 CAN1_MB28_LENGTH  0xffc03790   /* CAN Controller 1 Mailbox 28 Length Register */
+#define              CAN1_MB28_TIMESTAMP  0xffc03794   /* CAN Controller 1 Mailbox 28 Timestamp Register */
+#define                    CAN1_MB28_ID0  0xffc03798   /* CAN Controller 1 Mailbox 28 ID0 Register */
+#define                    CAN1_MB28_ID1  0xffc0379c   /* CAN Controller 1 Mailbox 28 ID1 Register */
+#define                  CAN1_MB29_DATA0  0xffc037a0   /* CAN Controller 1 Mailbox 29 Data 0 Register */
+#define                  CAN1_MB29_DATA1  0xffc037a4   /* CAN Controller 1 Mailbox 29 Data 1 Register */
+#define                  CAN1_MB29_DATA2  0xffc037a8   /* CAN Controller 1 Mailbox 29 Data 2 Register */
+#define                  CAN1_MB29_DATA3  0xffc037ac   /* CAN Controller 1 Mailbox 29 Data 3 Register */
+#define                 CAN1_MB29_LENGTH  0xffc037b0   /* CAN Controller 1 Mailbox 29 Length Register */
+#define              CAN1_MB29_TIMESTAMP  0xffc037b4   /* CAN Controller 1 Mailbox 29 Timestamp Register */
+#define                    CAN1_MB29_ID0  0xffc037b8   /* CAN Controller 1 Mailbox 29 ID0 Register */
+#define                    CAN1_MB29_ID1  0xffc037bc   /* CAN Controller 1 Mailbox 29 ID1 Register */
+#define                  CAN1_MB30_DATA0  0xffc037c0   /* CAN Controller 1 Mailbox 30 Data 0 Register */
+#define                  CAN1_MB30_DATA1  0xffc037c4   /* CAN Controller 1 Mailbox 30 Data 1 Register */
+#define                  CAN1_MB30_DATA2  0xffc037c8   /* CAN Controller 1 Mailbox 30 Data 2 Register */
+#define                  CAN1_MB30_DATA3  0xffc037cc   /* CAN Controller 1 Mailbox 30 Data 3 Register */
+#define                 CAN1_MB30_LENGTH  0xffc037d0   /* CAN Controller 1 Mailbox 30 Length Register */
+#define              CAN1_MB30_TIMESTAMP  0xffc037d4   /* CAN Controller 1 Mailbox 30 Timestamp Register */
+#define                    CAN1_MB30_ID0  0xffc037d8   /* CAN Controller 1 Mailbox 30 ID0 Register */
+#define                    CAN1_MB30_ID1  0xffc037dc   /* CAN Controller 1 Mailbox 30 ID1 Register */
+#define                  CAN1_MB31_DATA0  0xffc037e0   /* CAN Controller 1 Mailbox 31 Data 0 Register */
+#define                  CAN1_MB31_DATA1  0xffc037e4   /* CAN Controller 1 Mailbox 31 Data 1 Register */
+#define                  CAN1_MB31_DATA2  0xffc037e8   /* CAN Controller 1 Mailbox 31 Data 2 Register */
+#define                  CAN1_MB31_DATA3  0xffc037ec   /* CAN Controller 1 Mailbox 31 Data 3 Register */
+#define                 CAN1_MB31_LENGTH  0xffc037f0   /* CAN Controller 1 Mailbox 31 Length Register */
+#define              CAN1_MB31_TIMESTAMP  0xffc037f4   /* CAN Controller 1 Mailbox 31 Timestamp Register */
+#define                    CAN1_MB31_ID0  0xffc037f8   /* CAN Controller 1 Mailbox 31 ID0 Register */
+#define                    CAN1_MB31_ID1  0xffc037fc   /* CAN Controller 1 Mailbox 31 ID1 Register */
+
+/* HOST Port Registers */
+
+#define                     HOST_CONTROL  0xffc03a00   /* HOST Control Register */
+#define                      HOST_STATUS  0xffc03a04   /* HOST Status Register */
+#define                     HOST_TIMEOUT  0xffc03a08   /* HOST Acknowledge Mode Timeout Register */
+
+/* Pixel Compositor (PIXC) Registers */
+
+#define                         PIXC_CTL  0xffc04400   /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */
+#define                         PIXC_PPL  0xffc04404   /* Holds the number of pixels per line of the display */
+#define                         PIXC_LPF  0xffc04408   /* Holds the number of lines per frame of the display */
+#define                     PIXC_AHSTART  0xffc0440c   /* Contains horizontal start pixel information of the overlay data (set A) */
+#define                       PIXC_AHEND  0xffc04410   /* Contains horizontal end pixel information of the overlay data (set A) */
+#define                     PIXC_AVSTART  0xffc04414   /* Contains vertical start pixel information of the overlay data (set A) */
+#define                       PIXC_AVEND  0xffc04418   /* Contains vertical end pixel information of the overlay data (set A) */
+#define                     PIXC_ATRANSP  0xffc0441c   /* Contains the transparency ratio (set A) */
+#define                     PIXC_BHSTART  0xffc04420   /* Contains horizontal start pixel information of the overlay data (set B) */
+#define                       PIXC_BHEND  0xffc04424   /* Contains horizontal end pixel information of the overlay data (set B) */
+#define                     PIXC_BVSTART  0xffc04428   /* Contains vertical start pixel information of the overlay data (set B) */
+#define                       PIXC_BVEND  0xffc0442c   /* Contains vertical end pixel information of the overlay data (set B) */
+#define                     PIXC_BTRANSP  0xffc04430   /* Contains the transparency ratio (set B) */
+#define                    PIXC_INTRSTAT  0xffc0443c   /* Overlay interrupt configuration/status */
+#define                       PIXC_RYCON  0xffc04440   /* Color space conversion matrix register. Contains the R/Y conversion coefficients */
+#define                       PIXC_GUCON  0xffc04444   /* Color space conversion matrix register. Contains the G/U conversion coefficients */
+#define                       PIXC_BVCON  0xffc04448   /* Color space conversion matrix register. Contains the B/V conversion coefficients */
+#define                      PIXC_CCBIAS  0xffc0444c   /* Bias values for the color space conversion matrix */
+#define                          PIXC_TC  0xffc04450   /* Holds the transparent color value */
+
+/* Handshake MDMA 0 Registers */
+
+#define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
+#define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
+#define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
+#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshold Register */
+#define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
+#define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
+#define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
+
+/* Handshake MDMA 1 Registers */
+
+#define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
+#define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
+#define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
+#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshold Register */
+#define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
+#define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
+#define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
+
+
+/* ********************************************************** */
+/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
+/*     and MULTI BIT READ MACROS                              */
+/* ********************************************************** */
+
+/* Bit masks for PIXC_CTL */
+
+#define                   PIXC_EN  0x1        /* Pixel Compositor Enable */
+#define                  OVR_A_EN  0x2        /* Overlay A Enable */
+#define                  OVR_B_EN  0x4        /* Overlay B Enable */
+#define                  IMG_FORM  0x8        /* Image Data Format */
+#define                  OVR_FORM  0x10       /* Overlay Data Format */
+#define                  OUT_FORM  0x20       /* Output Data Format */
+#define                   UDS_MOD  0x40       /* Resampling Mode */
+#define                     TC_EN  0x80       /* Transparent Color Enable */
+#define                  IMG_STAT  0x300      /* Image FIFO Status */
+#define                  OVR_STAT  0xc00      /* Overlay FIFO Status */
+#define                    WM_LVL  0x3000     /* FIFO Watermark Level */
+
+/* Bit masks for PIXC_AHSTART */
+
+#define                  A_HSTART  0xfff      /* Horizontal Start Coordinates */
+
+/* Bit masks for PIXC_AHEND */
+
+#define                    A_HEND  0xfff      /* Horizontal End Coordinates */
+
+/* Bit masks for PIXC_AVSTART */
+
+#define                  A_VSTART  0x3ff      /* Vertical Start Coordinates */
+
+/* Bit masks for PIXC_AVEND */
+
+#define                    A_VEND  0x3ff      /* Vertical End Coordinates */
+
+/* Bit masks for PIXC_ATRANSP */
+
+#define                  A_TRANSP  0xf        /* Transparency Value */
+
+/* Bit masks for PIXC_BHSTART */
+
+#define                  B_HSTART  0xfff      /* Horizontal Start Coordinates */
+
+/* Bit masks for PIXC_BHEND */
+
+#define                    B_HEND  0xfff      /* Horizontal End Coordinates */
+
+/* Bit masks for PIXC_BVSTART */
+
+#define                  B_VSTART  0x3ff      /* Vertical Start Coordinates */
+
+/* Bit masks for PIXC_BVEND */
+
+#define                    B_VEND  0x3ff      /* Vertical End Coordinates */
+
+/* Bit masks for PIXC_BTRANSP */
+
+#define                  B_TRANSP  0xf        /* Transparency Value */
+
+/* Bit masks for PIXC_INTRSTAT */
+
+#define                OVR_INT_EN  0x1        /* Interrupt at End of Last Valid Overlay */
+#define                FRM_INT_EN  0x2        /* Interrupt at End of Frame */
+#define              OVR_INT_STAT  0x4        /* Overlay Interrupt Status */
+#define              FRM_INT_STAT  0x8        /* Frame Interrupt Status */
+
+/* Bit masks for PIXC_RYCON */
+
+#define                       A11  0x3ff      /* A11 in the Coefficient Matrix */
+#define                       A12  0xffc00    /* A12 in the Coefficient Matrix */
+#define                       A13  0x3ff00000 /* A13 in the Coefficient Matrix */
+#define                  RY_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_GUCON */
+
+#define                       A21  0x3ff      /* A21 in the Coefficient Matrix */
+#define                       A22  0xffc00    /* A22 in the Coefficient Matrix */
+#define                       A23  0x3ff00000 /* A23 in the Coefficient Matrix */
+#define                  GU_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_BVCON */
+
+#define                       A31  0x3ff      /* A31 in the Coefficient Matrix */
+#define                       A32  0xffc00    /* A32 in the Coefficient Matrix */
+#define                       A33  0x3ff00000 /* A33 in the Coefficient Matrix */
+#define                  BV_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_CCBIAS */
+
+#define                       A14  0x3ff      /* A14 in the Bias Vector */
+#define                       A24  0xffc00    /* A24 in the Bias Vector */
+#define                       A34  0x3ff00000 /* A34 in the Bias Vector */
+
+/* Bit masks for PIXC_TC */
+
+#define                  RY_TRANS  0xff       /* Transparent Color - R/Y Component */
+#define                  GU_TRANS  0xff00     /* Transparent Color - G/U Component */
+#define                  BV_TRANS  0xff0000   /* Transparent Color - B/V Component */
+
+/* Bit masks for TIMER_ENABLE1 */
+
+#define                    TIMEN8  0x1        /* Timer 8 Enable */
+#define                    TIMEN9  0x2        /* Timer 9 Enable */
+#define                   TIMEN10  0x4        /* Timer 10 Enable */
+
+/* Bit masks for TIMER_DISABLE1 */
+
+#define                   TIMDIS8  0x1        /* Timer 8 Disable */
+#define                   TIMDIS9  0x2        /* Timer 9 Disable */
+#define                  TIMDIS10  0x4        /* Timer 10 Disable */
+
+/* Bit masks for TIMER_STATUS1 */
+
+#define                    TIMIL8  0x1        /* Timer 8 Interrupt */
+#define                    TIMIL9  0x2        /* Timer 9 Interrupt */
+#define                   TIMIL10  0x4        /* Timer 10 Interrupt */
+#define                 TOVF_ERR8  0x10       /* Timer 8 Counter Overflow */
+#define                 TOVF_ERR9  0x20       /* Timer 9 Counter Overflow */
+#define                TOVF_ERR10  0x40       /* Timer 10 Counter Overflow */
+#define                     TRUN8  0x1000     /* Timer 8 Slave Enable Status */
+#define                     TRUN9  0x2000     /* Timer 9 Slave Enable Status */
+#define                    TRUN10  0x4000     /* Timer 10 Slave Enable Status */
+
+/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
+
+#endif /* _DEF_BF544_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF547.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF547.h
new file mode 100644
index 0000000..7cc7928
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -0,0 +1,1034 @@
+/*
+ * Copyright 2008-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF547_H
+#define _DEF_BF547_H
+
+/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
+#include "defBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF547 that are not in the common header */
+
+/* Timer Registers */
+
+#define                    TIMER8_CONFIG  0xffc00600   /* Timer 8 Configuration Register */
+#define                   TIMER8_COUNTER  0xffc00604   /* Timer 8 Counter Register */
+#define                    TIMER8_PERIOD  0xffc00608   /* Timer 8 Period Register */
+#define                     TIMER8_WIDTH  0xffc0060c   /* Timer 8 Width Register */
+#define                    TIMER9_CONFIG  0xffc00610   /* Timer 9 Configuration Register */
+#define                   TIMER9_COUNTER  0xffc00614   /* Timer 9 Counter Register */
+#define                    TIMER9_PERIOD  0xffc00618   /* Timer 9 Period Register */
+#define                     TIMER9_WIDTH  0xffc0061c   /* Timer 9 Width Register */
+#define                   TIMER10_CONFIG  0xffc00620   /* Timer 10 Configuration Register */
+#define                  TIMER10_COUNTER  0xffc00624   /* Timer 10 Counter Register */
+#define                   TIMER10_PERIOD  0xffc00628   /* Timer 10 Period Register */
+#define                    TIMER10_WIDTH  0xffc0062c   /* Timer 10 Width Register */
+
+/* Timer Group of 3 Registers */
+
+#define                    TIMER_ENABLE1  0xffc00640   /* Timer Group of 3 Enable Register */
+#define                   TIMER_DISABLE1  0xffc00644   /* Timer Group of 3 Disable Register */
+#define                    TIMER_STATUS1  0xffc00648   /* Timer Group of 3 Status Register */
+
+/* SPORT0 Registers */
+
+#define                      SPORT0_TCR1  0xffc00800   /* SPORT0 Transmit Configuration 1 Register */
+#define                      SPORT0_TCR2  0xffc00804   /* SPORT0 Transmit Configuration 2 Register */
+#define                   SPORT0_TCLKDIV  0xffc00808   /* SPORT0 Transmit Serial Clock Divider Register */
+#define                    SPORT0_TFSDIV  0xffc0080c   /* SPORT0 Transmit Frame Sync Divider Register */
+#define                        SPORT0_TX  0xffc00810   /* SPORT0 Transmit Data Register */
+#define                        SPORT0_RX  0xffc00818   /* SPORT0 Receive Data Register */
+#define                      SPORT0_RCR1  0xffc00820   /* SPORT0 Receive Configuration 1 Register */
+#define                      SPORT0_RCR2  0xffc00824   /* SPORT0 Receive Configuration 2 Register */
+#define                   SPORT0_RCLKDIV  0xffc00828   /* SPORT0 Receive Serial Clock Divider Register */
+#define                    SPORT0_RFSDIV  0xffc0082c   /* SPORT0 Receive Frame Sync Divider Register */
+#define                      SPORT0_STAT  0xffc00830   /* SPORT0 Status Register */
+#define                      SPORT0_CHNL  0xffc00834   /* SPORT0 Current Channel Register */
+#define                     SPORT0_MCMC1  0xffc00838   /* SPORT0 Multi channel Configuration Register 1 */
+#define                     SPORT0_MCMC2  0xffc0083c   /* SPORT0 Multi channel Configuration Register 2 */
+#define                     SPORT0_MTCS0  0xffc00840   /* SPORT0 Multi channel Transmit Select Register 0 */
+#define                     SPORT0_MTCS1  0xffc00844   /* SPORT0 Multi channel Transmit Select Register 1 */
+#define                     SPORT0_MTCS2  0xffc00848   /* SPORT0 Multi channel Transmit Select Register 2 */
+#define                     SPORT0_MTCS3  0xffc0084c   /* SPORT0 Multi channel Transmit Select Register 3 */
+#define                     SPORT0_MRCS0  0xffc00850   /* SPORT0 Multi channel Receive Select Register 0 */
+#define                     SPORT0_MRCS1  0xffc00854   /* SPORT0 Multi channel Receive Select Register 1 */
+#define                     SPORT0_MRCS2  0xffc00858   /* SPORT0 Multi channel Receive Select Register 2 */
+#define                     SPORT0_MRCS3  0xffc0085c   /* SPORT0 Multi channel Receive Select Register 3 */
+
+/* EPPI0 Registers */
+
+#define                     EPPI0_STATUS  0xffc01000   /* EPPI0 Status Register */
+#define                     EPPI0_HCOUNT  0xffc01004   /* EPPI0 Horizontal Transfer Count Register */
+#define                     EPPI0_HDELAY  0xffc01008   /* EPPI0 Horizontal Delay Count Register */
+#define                     EPPI0_VCOUNT  0xffc0100c   /* EPPI0 Vertical Transfer Count Register */
+#define                     EPPI0_VDELAY  0xffc01010   /* EPPI0 Vertical Delay Count Register */
+#define                      EPPI0_FRAME  0xffc01014   /* EPPI0 Lines per Frame Register */
+#define                       EPPI0_LINE  0xffc01018   /* EPPI0 Samples per Line Register */
+#define                     EPPI0_CLKDIV  0xffc0101c   /* EPPI0 Clock Divide Register */
+#define                    EPPI0_CONTROL  0xffc01020   /* EPPI0 Control Register */
+#define                   EPPI0_FS1W_HBL  0xffc01024   /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */
+#define                  EPPI0_FS1P_AVPL  0xffc01028   /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */
+#define                   EPPI0_FS2W_LVB  0xffc0102c   /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */
+#define                  EPPI0_FS2P_LAVF  0xffc01030   /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */
+#define                       EPPI0_CLIP  0xffc01034   /* EPPI0 Clipping Register */
+
+/* UART2 Registers */
+
+#define                        UART2_DLL  0xffc02100   /* Divisor Latch Low Byte */
+#define                        UART2_DLH  0xffc02104   /* Divisor Latch High Byte */
+#define                       UART2_GCTL  0xffc02108   /* Global Control Register */
+#define                        UART2_LCR  0xffc0210c   /* Line Control Register */
+#define                        UART2_MCR  0xffc02110   /* Modem Control Register */
+#define                        UART2_LSR  0xffc02114   /* Line Status Register */
+#define                        UART2_MSR  0xffc02118   /* Modem Status Register */
+#define                        UART2_SCR  0xffc0211c   /* Scratch Register */
+#define                    UART2_IER_SET  0xffc02120   /* Interrupt Enable Register Set */
+#define                  UART2_IER_CLEAR  0xffc02124   /* Interrupt Enable Register Clear */
+#define                        UART2_RBR  0xffc0212c   /* Receive Buffer Register */
+
+/* Two Wire Interface Registers (TWI1) */
+
+#define                     TWI1_REGBASE  0xffc02200
+#define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
+#define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
+#define                   TWI1_SLAVE_CTL  0xffc02208   /* TWI Slave Mode Control Register */
+#define                  TWI1_SLAVE_STAT  0xffc0220c   /* TWI Slave Mode Status Register */
+#define                  TWI1_SLAVE_ADDR  0xffc02210   /* TWI Slave Mode Address Register */
+#define                  TWI1_MASTER_CTL  0xffc02214   /* TWI Master Mode Control Register */
+#define                 TWI1_MASTER_STAT  0xffc02218   /* TWI Master Mode Status Register */
+#define                 TWI1_MASTER_ADDR  0xffc0221c   /* TWI Master Mode Address Register */
+#define                    TWI1_INT_STAT  0xffc02220   /* TWI Interrupt Status Register */
+#define                    TWI1_INT_MASK  0xffc02224   /* TWI Interrupt Mask Register */
+#define                    TWI1_FIFO_CTL  0xffc02228   /* TWI FIFO Control Register */
+#define                   TWI1_FIFO_STAT  0xffc0222c   /* TWI FIFO Status Register */
+#define                   TWI1_XMT_DATA8  0xffc02280   /* TWI FIFO Transmit Data Single Byte Register */
+#define                  TWI1_XMT_DATA16  0xffc02284   /* TWI FIFO Transmit Data Double Byte Register */
+#define                   TWI1_RCV_DATA8  0xffc02288   /* TWI FIFO Receive Data Single Byte Register */
+#define                  TWI1_RCV_DATA16  0xffc0228c   /* TWI FIFO Receive Data Double Byte Register */
+
+/* SPI2  Registers */
+
+#define                     SPI2_REGBASE  0xffc02400
+#define                         SPI2_CTL  0xffc02400   /* SPI2 Control Register */
+#define                         SPI2_FLG  0xffc02404   /* SPI2 Flag Register */
+#define                        SPI2_STAT  0xffc02408   /* SPI2 Status Register */
+#define                        SPI2_TDBR  0xffc0240c   /* SPI2 Transmit Data Buffer Register */
+#define                        SPI2_RDBR  0xffc02410   /* SPI2 Receive Data Buffer Register */
+#define                        SPI2_BAUD  0xffc02414   /* SPI2 Baud Rate Register */
+#define                      SPI2_SHADOW  0xffc02418   /* SPI2 Receive Data Buffer Shadow Register */
+
+/* ATAPI Registers */
+
+#define                    ATAPI_CONTROL  0xffc03800   /* ATAPI Control Register */
+#define                     ATAPI_STATUS  0xffc03804   /* ATAPI Status Register */
+#define                   ATAPI_DEV_ADDR  0xffc03808   /* ATAPI Device Register Address */
+#define                  ATAPI_DEV_TXBUF  0xffc0380c   /* ATAPI Device Register Write Data */
+#define                  ATAPI_DEV_RXBUF  0xffc03810   /* ATAPI Device Register Read Data */
+#define                   ATAPI_INT_MASK  0xffc03814   /* ATAPI Interrupt Mask Register */
+#define                 ATAPI_INT_STATUS  0xffc03818   /* ATAPI Interrupt Status Register */
+#define                   ATAPI_XFER_LEN  0xffc0381c   /* ATAPI Length of Transfer */
+#define                ATAPI_LINE_STATUS  0xffc03820   /* ATAPI Line Status */
+#define                   ATAPI_SM_STATE  0xffc03824   /* ATAPI State Machine Status */
+#define                  ATAPI_TERMINATE  0xffc03828   /* ATAPI Host Terminate */
+#define                 ATAPI_PIO_TFRCNT  0xffc0382c   /* ATAPI PIO mode transfer count */
+#define                 ATAPI_DMA_TFRCNT  0xffc03830   /* ATAPI DMA mode transfer count */
+#define               ATAPI_UMAIN_TFRCNT  0xffc03834   /* ATAPI UDMAIN transfer count */
+#define             ATAPI_UDMAOUT_TFRCNT  0xffc03838   /* ATAPI UDMAOUT transfer count */
+#define                  ATAPI_REG_TIM_0  0xffc03840   /* ATAPI Register Transfer Timing 0 */
+#define                  ATAPI_PIO_TIM_0  0xffc03844   /* ATAPI PIO Timing 0 Register */
+#define                  ATAPI_PIO_TIM_1  0xffc03848   /* ATAPI PIO Timing 1 Register */
+#define                ATAPI_MULTI_TIM_0  0xffc03850   /* ATAPI Multi-DMA Timing 0 Register */
+#define                ATAPI_MULTI_TIM_1  0xffc03854   /* ATAPI Multi-DMA Timing 1 Register */
+#define                ATAPI_MULTI_TIM_2  0xffc03858   /* ATAPI Multi-DMA Timing 2 Register */
+#define                ATAPI_ULTRA_TIM_0  0xffc03860   /* ATAPI Ultra-DMA Timing 0 Register */
+#define                ATAPI_ULTRA_TIM_1  0xffc03864   /* ATAPI Ultra-DMA Timing 1 Register */
+#define                ATAPI_ULTRA_TIM_2  0xffc03868   /* ATAPI Ultra-DMA Timing 2 Register */
+#define                ATAPI_ULTRA_TIM_3  0xffc0386c   /* ATAPI Ultra-DMA Timing 3 Register */
+
+/* SDH Registers */
+
+#define                      SDH_PWR_CTL  0xffc03900   /* SDH Power Control */
+#define                      SDH_CLK_CTL  0xffc03904   /* SDH Clock Control */
+#define                     SDH_ARGUMENT  0xffc03908   /* SDH Argument */
+#define                      SDH_COMMAND  0xffc0390c   /* SDH Command */
+#define                     SDH_RESP_CMD  0xffc03910   /* SDH Response Command */
+#define                    SDH_RESPONSE0  0xffc03914   /* SDH Response0 */
+#define                    SDH_RESPONSE1  0xffc03918   /* SDH Response1 */
+#define                    SDH_RESPONSE2  0xffc0391c   /* SDH Response2 */
+#define                    SDH_RESPONSE3  0xffc03920   /* SDH Response3 */
+#define                   SDH_DATA_TIMER  0xffc03924   /* SDH Data Timer */
+#define                    SDH_DATA_LGTH  0xffc03928   /* SDH Data Length */
+#define                     SDH_DATA_CTL  0xffc0392c   /* SDH Data Control */
+#define                     SDH_DATA_CNT  0xffc03930   /* SDH Data Counter */
+#define                       SDH_STATUS  0xffc03934   /* SDH Status */
+#define                   SDH_STATUS_CLR  0xffc03938   /* SDH Status Clear */
+#define                        SDH_MASK0  0xffc0393c   /* SDH Interrupt0 Mask */
+#define                        SDH_MASK1  0xffc03940   /* SDH Interrupt1 Mask */
+#define                     SDH_FIFO_CNT  0xffc03948   /* SDH FIFO Counter */
+#define                         SDH_FIFO  0xffc03980   /* SDH Data FIFO */
+#define                     SDH_E_STATUS  0xffc039c0   /* SDH Exception Status */
+#define                       SDH_E_MASK  0xffc039c4   /* SDH Exception Mask */
+#define                          SDH_CFG  0xffc039c8   /* SDH Configuration */
+#define                   SDH_RD_WAIT_EN  0xffc039cc   /* SDH Read Wait Enable */
+#define                         SDH_PID0  0xffc039d0   /* SDH Peripheral Identification0 */
+#define                         SDH_PID1  0xffc039d4   /* SDH Peripheral Identification1 */
+#define                         SDH_PID2  0xffc039d8   /* SDH Peripheral Identification2 */
+#define                         SDH_PID3  0xffc039dc   /* SDH Peripheral Identification3 */
+#define                         SDH_PID4  0xffc039e0   /* SDH Peripheral Identification4 */
+#define                         SDH_PID5  0xffc039e4   /* SDH Peripheral Identification5 */
+#define                         SDH_PID6  0xffc039e8   /* SDH Peripheral Identification6 */
+#define                         SDH_PID7  0xffc039ec   /* SDH Peripheral Identification7 */
+
+/* HOST Port Registers */
+
+#define                     HOST_CONTROL  0xffc03a00   /* HOST Control Register */
+#define                      HOST_STATUS  0xffc03a04   /* HOST Status Register */
+#define                     HOST_TIMEOUT  0xffc03a08   /* HOST Acknowledge Mode Timeout Register */
+
+/* USB Control Registers */
+
+#define                        USB_FADDR  0xffc03c00   /* Function address register */
+#define                        USB_POWER  0xffc03c04   /* Power management register */
+#define                       USB_INTRTX  0xffc03c08   /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
+#define                       USB_INTRRX  0xffc03c0c   /* Interrupt register for Rx endpoints 1 to 7 */
+#define                      USB_INTRTXE  0xffc03c10   /* Interrupt enable register for IntrTx */
+#define                      USB_INTRRXE  0xffc03c14   /* Interrupt enable register for IntrRx */
+#define                      USB_INTRUSB  0xffc03c18   /* Interrupt register for common USB interrupts */
+#define                     USB_INTRUSBE  0xffc03c1c   /* Interrupt enable register for IntrUSB */
+#define                        USB_FRAME  0xffc03c20   /* USB frame number */
+#define                        USB_INDEX  0xffc03c24   /* Index register for selecting the indexed endpoint registers */
+#define                     USB_TESTMODE  0xffc03c28   /* Enabled USB 20 test modes */
+#define                     USB_GLOBINTR  0xffc03c2c   /* Global Interrupt Mask register and Wakeup Exception Interrupt */
+#define                   USB_GLOBAL_CTL  0xffc03c30   /* Global Clock Control for the core */
+
+/* USB Packet Control Registers */
+
+#define                USB_TX_MAX_PACKET  0xffc03c40   /* Maximum packet size for Host Tx endpoint */
+#define                         USB_CSR0  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                        USB_TXCSR  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                USB_RX_MAX_PACKET  0xffc03c48   /* Maximum packet size for Host Rx endpoint */
+#define                        USB_RXCSR  0xffc03c4c   /* Control Status register for Host Rx endpoint */
+#define                       USB_COUNT0  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                      USB_RXCOUNT  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                       USB_TXTYPE  0xffc03c54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
+#define                    USB_NAKLIMIT0  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                   USB_TXINTERVAL  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                       USB_RXTYPE  0xffc03c5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
+#define                   USB_RXINTERVAL  0xffc03c60   /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
+#define                      USB_TXCOUNT  0xffc03c68   /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* USB Endpoint FIFO Registers */
+
+#define                     USB_EP0_FIFO  0xffc03c80   /* Endpoint 0 FIFO */
+#define                     USB_EP1_FIFO  0xffc03c88   /* Endpoint 1 FIFO */
+#define                     USB_EP2_FIFO  0xffc03c90   /* Endpoint 2 FIFO */
+#define                     USB_EP3_FIFO  0xffc03c98   /* Endpoint 3 FIFO */
+#define                     USB_EP4_FIFO  0xffc03ca0   /* Endpoint 4 FIFO */
+#define                     USB_EP5_FIFO  0xffc03ca8   /* Endpoint 5 FIFO */
+#define                     USB_EP6_FIFO  0xffc03cb0   /* Endpoint 6 FIFO */
+#define                     USB_EP7_FIFO  0xffc03cb8   /* Endpoint 7 FIFO */
+
+/* USB OTG Control Registers */
+
+#define                  USB_OTG_DEV_CTL  0xffc03d00   /* OTG Device Control Register */
+#define                 USB_OTG_VBUS_IRQ  0xffc03d04   /* OTG VBUS Control Interrupts */
+#define                USB_OTG_VBUS_MASK  0xffc03d08   /* VBUS Control Interrupt Enable */
+
+/* USB Phy Control Registers */
+
+#define                     USB_LINKINFO  0xffc03d48   /* Enables programming of some PHY-side delays */
+#define                        USB_VPLEN  0xffc03d4c   /* Determines duration of VBUS pulse for VBUS charging */
+#define                      USB_HS_EOF1  0xffc03d50   /* Time buffer for High-Speed transactions */
+#define                      USB_FS_EOF1  0xffc03d54   /* Time buffer for Full-Speed transactions */
+#define                      USB_LS_EOF1  0xffc03d58   /* Time buffer for Low-Speed transactions */
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define                   USB_APHY_CNTRL  0xffc03de0   /* Register that increases visibility of Analog PHY */
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define                   USB_APHY_CALIB  0xffc03de4   /* Register used to set some calibration values */
+#define                  USB_APHY_CNTRL2  0xffc03de8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
+
+#define                  USB_PLLOSC_CTRL  0xffc03df0   /* Used to program different parameters for USB PLL and Oscillator */
+#define                   USB_SRP_CLKDIV  0xffc03df4   /* Used to program clock divide value for the clock fed to the SRP detection logic */
+
+/* USB Endpoint 0 Control Registers */
+
+#define                USB_EP_NI0_TXMAXP  0xffc03e00   /* Maximum packet size for Host Tx endpoint0 */
+#define                 USB_EP_NI0_TXCSR  0xffc03e04   /* Control Status register for endpoint 0 */
+#define                USB_EP_NI0_RXMAXP  0xffc03e08   /* Maximum packet size for Host Rx endpoint0 */
+#define                 USB_EP_NI0_RXCSR  0xffc03e0c   /* Control Status register for Host Rx endpoint0 */
+#define               USB_EP_NI0_RXCOUNT  0xffc03e10   /* Number of bytes received in endpoint 0 FIFO */
+#define                USB_EP_NI0_TXTYPE  0xffc03e14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
+#define            USB_EP_NI0_TXINTERVAL  0xffc03e18   /* Sets the NAK response timeout on Endpoint 0 */
+#define                USB_EP_NI0_RXTYPE  0xffc03e1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
+#define            USB_EP_NI0_RXINTERVAL  0xffc03e20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
+#define               USB_EP_NI0_TXCOUNT  0xffc03e28   /* Number of bytes to be written to the endpoint0 Tx FIFO */
+
+/* USB Endpoint 1 Control Registers */
+
+#define                USB_EP_NI1_TXMAXP  0xffc03e40   /* Maximum packet size for Host Tx endpoint1 */
+#define                 USB_EP_NI1_TXCSR  0xffc03e44   /* Control Status register for endpoint1 */
+#define                USB_EP_NI1_RXMAXP  0xffc03e48   /* Maximum packet size for Host Rx endpoint1 */
+#define                 USB_EP_NI1_RXCSR  0xffc03e4c   /* Control Status register for Host Rx endpoint1 */
+#define               USB_EP_NI1_RXCOUNT  0xffc03e50   /* Number of bytes received in endpoint1 FIFO */
+#define                USB_EP_NI1_TXTYPE  0xffc03e54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
+#define            USB_EP_NI1_TXINTERVAL  0xffc03e58   /* Sets the NAK response timeout on Endpoint1 */
+#define                USB_EP_NI1_RXTYPE  0xffc03e5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
+#define            USB_EP_NI1_RXINTERVAL  0xffc03e60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
+#define               USB_EP_NI1_TXCOUNT  0xffc03e68   /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
+
+/* USB Endpoint 2 Control Registers */
+
+#define                USB_EP_NI2_TXMAXP  0xffc03e80   /* Maximum packet size for Host Tx endpoint2 */
+#define                 USB_EP_NI2_TXCSR  0xffc03e84   /* Control Status register for endpoint2 */
+#define                USB_EP_NI2_RXMAXP  0xffc03e88   /* Maximum packet size for Host Rx endpoint2 */
+#define                 USB_EP_NI2_RXCSR  0xffc03e8c   /* Control Status register for Host Rx endpoint2 */
+#define               USB_EP_NI2_RXCOUNT  0xffc03e90   /* Number of bytes received in endpoint2 FIFO */
+#define                USB_EP_NI2_TXTYPE  0xffc03e94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
+#define            USB_EP_NI2_TXINTERVAL  0xffc03e98   /* Sets the NAK response timeout on Endpoint2 */
+#define                USB_EP_NI2_RXTYPE  0xffc03e9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
+#define            USB_EP_NI2_RXINTERVAL  0xffc03ea0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
+#define               USB_EP_NI2_TXCOUNT  0xffc03ea8   /* Number of bytes to be written to the endpoint2 Tx FIFO */
+
+/* USB Endpoint 3 Control Registers */
+
+#define                USB_EP_NI3_TXMAXP  0xffc03ec0   /* Maximum packet size for Host Tx endpoint3 */
+#define                 USB_EP_NI3_TXCSR  0xffc03ec4   /* Control Status register for endpoint3 */
+#define                USB_EP_NI3_RXMAXP  0xffc03ec8   /* Maximum packet size for Host Rx endpoint3 */
+#define                 USB_EP_NI3_RXCSR  0xffc03ecc   /* Control Status register for Host Rx endpoint3 */
+#define               USB_EP_NI3_RXCOUNT  0xffc03ed0   /* Number of bytes received in endpoint3 FIFO */
+#define                USB_EP_NI3_TXTYPE  0xffc03ed4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
+#define            USB_EP_NI3_TXINTERVAL  0xffc03ed8   /* Sets the NAK response timeout on Endpoint3 */
+#define                USB_EP_NI3_RXTYPE  0xffc03edc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
+#define            USB_EP_NI3_RXINTERVAL  0xffc03ee0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
+#define               USB_EP_NI3_TXCOUNT  0xffc03ee8   /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
+
+/* USB Endpoint 4 Control Registers */
+
+#define                USB_EP_NI4_TXMAXP  0xffc03f00   /* Maximum packet size for Host Tx endpoint4 */
+#define                 USB_EP_NI4_TXCSR  0xffc03f04   /* Control Status register for endpoint4 */
+#define                USB_EP_NI4_RXMAXP  0xffc03f08   /* Maximum packet size for Host Rx endpoint4 */
+#define                 USB_EP_NI4_RXCSR  0xffc03f0c   /* Control Status register for Host Rx endpoint4 */
+#define               USB_EP_NI4_RXCOUNT  0xffc03f10   /* Number of bytes received in endpoint4 FIFO */
+#define                USB_EP_NI4_TXTYPE  0xffc03f14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
+#define            USB_EP_NI4_TXINTERVAL  0xffc03f18   /* Sets the NAK response timeout on Endpoint4 */
+#define                USB_EP_NI4_RXTYPE  0xffc03f1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
+#define            USB_EP_NI4_RXINTERVAL  0xffc03f20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
+#define               USB_EP_NI4_TXCOUNT  0xffc03f28   /* Number of bytes to be written to the endpoint4 Tx FIFO */
+
+/* USB Endpoint 5 Control Registers */
+
+#define                USB_EP_NI5_TXMAXP  0xffc03f40   /* Maximum packet size for Host Tx endpoint5 */
+#define                 USB_EP_NI5_TXCSR  0xffc03f44   /* Control Status register for endpoint5 */
+#define                USB_EP_NI5_RXMAXP  0xffc03f48   /* Maximum packet size for Host Rx endpoint5 */
+#define                 USB_EP_NI5_RXCSR  0xffc03f4c   /* Control Status register for Host Rx endpoint5 */
+#define               USB_EP_NI5_RXCOUNT  0xffc03f50   /* Number of bytes received in endpoint5 FIFO */
+#define                USB_EP_NI5_TXTYPE  0xffc03f54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
+#define            USB_EP_NI5_TXINTERVAL  0xffc03f58   /* Sets the NAK response timeout on Endpoint5 */
+#define                USB_EP_NI5_RXTYPE  0xffc03f5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
+#define            USB_EP_NI5_RXINTERVAL  0xffc03f60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
+#define               USB_EP_NI5_TXCOUNT  0xffc03f68   /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
+
+/* USB Endpoint 6 Control Registers */
+
+#define                USB_EP_NI6_TXMAXP  0xffc03f80   /* Maximum packet size for Host Tx endpoint6 */
+#define                 USB_EP_NI6_TXCSR  0xffc03f84   /* Control Status register for endpoint6 */
+#define                USB_EP_NI6_RXMAXP  0xffc03f88   /* Maximum packet size for Host Rx endpoint6 */
+#define                 USB_EP_NI6_RXCSR  0xffc03f8c   /* Control Status register for Host Rx endpoint6 */
+#define               USB_EP_NI6_RXCOUNT  0xffc03f90   /* Number of bytes received in endpoint6 FIFO */
+#define                USB_EP_NI6_TXTYPE  0xffc03f94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
+#define            USB_EP_NI6_TXINTERVAL  0xffc03f98   /* Sets the NAK response timeout on Endpoint6 */
+#define                USB_EP_NI6_RXTYPE  0xffc03f9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
+#define            USB_EP_NI6_RXINTERVAL  0xffc03fa0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
+#define               USB_EP_NI6_TXCOUNT  0xffc03fa8   /* Number of bytes to be written to the endpoint6 Tx FIFO */
+
+/* USB Endpoint 7 Control Registers */
+
+#define                USB_EP_NI7_TXMAXP  0xffc03fc0   /* Maximum packet size for Host Tx endpoint7 */
+#define                 USB_EP_NI7_TXCSR  0xffc03fc4   /* Control Status register for endpoint7 */
+#define                USB_EP_NI7_RXMAXP  0xffc03fc8   /* Maximum packet size for Host Rx endpoint7 */
+#define                 USB_EP_NI7_RXCSR  0xffc03fcc   /* Control Status register for Host Rx endpoint7 */
+#define               USB_EP_NI7_RXCOUNT  0xffc03fd0   /* Number of bytes received in endpoint7 FIFO */
+#define                USB_EP_NI7_TXTYPE  0xffc03fd4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
+#define            USB_EP_NI7_TXINTERVAL  0xffc03fd8   /* Sets the NAK response timeout on Endpoint7 */
+#define                USB_EP_NI7_RXTYPE  0xffc03fdc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
+#define            USB_EP_NI7_RXINTERVAL  0xffc03fe0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
+#define               USB_EP_NI7_TXCOUNT  0xffc03fe8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
+
+#define                USB_DMA_INTERRUPT  0xffc04000   /* Indicates pending interrupts for the DMA channels */
+
+/* USB Channel 0 Config Registers */
+
+#define                  USB_DMA0CONTROL  0xffc04004   /* DMA master channel 0 configuration */
+#define                  USB_DMA0ADDRLOW  0xffc04008   /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0ADDRHIGH  0xffc0400c   /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0COUNTLOW  0xffc04010   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
+#define                USB_DMA0COUNTHIGH  0xffc04014   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
+
+/* USB Channel 1 Config Registers */
+
+#define                  USB_DMA1CONTROL  0xffc04024   /* DMA master channel 1 configuration */
+#define                  USB_DMA1ADDRLOW  0xffc04028   /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1ADDRHIGH  0xffc0402c   /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1COUNTLOW  0xffc04030   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
+#define                USB_DMA1COUNTHIGH  0xffc04034   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
+
+/* USB Channel 2 Config Registers */
+
+#define                  USB_DMA2CONTROL  0xffc04044   /* DMA master channel 2 configuration */
+#define                  USB_DMA2ADDRLOW  0xffc04048   /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2ADDRHIGH  0xffc0404c   /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2COUNTLOW  0xffc04050   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
+#define                USB_DMA2COUNTHIGH  0xffc04054   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
+
+/* USB Channel 3 Config Registers */
+
+#define                  USB_DMA3CONTROL  0xffc04064   /* DMA master channel 3 configuration */
+#define                  USB_DMA3ADDRLOW  0xffc04068   /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3ADDRHIGH  0xffc0406c   /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3COUNTLOW  0xffc04070   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
+#define                USB_DMA3COUNTHIGH  0xffc04074   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
+
+/* USB Channel 4 Config Registers */
+
+#define                  USB_DMA4CONTROL  0xffc04084   /* DMA master channel 4 configuration */
+#define                  USB_DMA4ADDRLOW  0xffc04088   /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4ADDRHIGH  0xffc0408c   /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4COUNTLOW  0xffc04090   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
+#define                USB_DMA4COUNTHIGH  0xffc04094   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
+
+/* USB Channel 5 Config Registers */
+
+#define                  USB_DMA5CONTROL  0xffc040a4   /* DMA master channel 5 configuration */
+#define                  USB_DMA5ADDRLOW  0xffc040a8   /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5ADDRHIGH  0xffc040ac   /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5COUNTLOW  0xffc040b0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
+#define                USB_DMA5COUNTHIGH  0xffc040b4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
+
+/* USB Channel 6 Config Registers */
+
+#define                  USB_DMA6CONTROL  0xffc040c4   /* DMA master channel 6 configuration */
+#define                  USB_DMA6ADDRLOW  0xffc040c8   /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6ADDRHIGH  0xffc040cc   /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6COUNTLOW  0xffc040d0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
+#define                USB_DMA6COUNTHIGH  0xffc040d4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
+
+/* USB Channel 7 Config Registers */
+
+#define                  USB_DMA7CONTROL  0xffc040e4   /* DMA master channel 7 configuration */
+#define                  USB_DMA7ADDRLOW  0xffc040e8   /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7ADDRHIGH  0xffc040ec   /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7COUNTLOW  0xffc040f0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
+#define                USB_DMA7COUNTHIGH  0xffc040f4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
+
+/* Keypad Registers */
+
+#define                         KPAD_CTL  0xffc04100   /* Controls keypad module enable and disable */
+#define                    KPAD_PRESCALE  0xffc04104   /* Establish a time base for programing the KPAD_MSEL register */
+#define                        KPAD_MSEL  0xffc04108   /* Selects delay parameters for keypad interface sensitivity */
+#define                      KPAD_ROWCOL  0xffc0410c   /* Captures the row and column output values of the keys pressed */
+#define                        KPAD_STAT  0xffc04110   /* Holds and clears the status of the keypad interface interrupt */
+#define                    KPAD_SOFTEVAL  0xffc04114   /* Lets software force keypad interface to check for keys being pressed */
+
+/* Pixel Compositor (PIXC) Registers */
+
+#define                         PIXC_CTL  0xffc04400   /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */
+#define                         PIXC_PPL  0xffc04404   /* Holds the number of pixels per line of the display */
+#define                         PIXC_LPF  0xffc04408   /* Holds the number of lines per frame of the display */
+#define                     PIXC_AHSTART  0xffc0440c   /* Contains horizontal start pixel information of the overlay data (set A) */
+#define                       PIXC_AHEND  0xffc04410   /* Contains horizontal end pixel information of the overlay data (set A) */
+#define                     PIXC_AVSTART  0xffc04414   /* Contains vertical start pixel information of the overlay data (set A) */
+#define                       PIXC_AVEND  0xffc04418   /* Contains vertical end pixel information of the overlay data (set A) */
+#define                     PIXC_ATRANSP  0xffc0441c   /* Contains the transparency ratio (set A) */
+#define                     PIXC_BHSTART  0xffc04420   /* Contains horizontal start pixel information of the overlay data (set B) */
+#define                       PIXC_BHEND  0xffc04424   /* Contains horizontal end pixel information of the overlay data (set B) */
+#define                     PIXC_BVSTART  0xffc04428   /* Contains vertical start pixel information of the overlay data (set B) */
+#define                       PIXC_BVEND  0xffc0442c   /* Contains vertical end pixel information of the overlay data (set B) */
+#define                     PIXC_BTRANSP  0xffc04430   /* Contains the transparency ratio (set B) */
+#define                    PIXC_INTRSTAT  0xffc0443c   /* Overlay interrupt configuration/status */
+#define                       PIXC_RYCON  0xffc04440   /* Color space conversion matrix register. Contains the R/Y conversion coefficients */
+#define                       PIXC_GUCON  0xffc04444   /* Color space conversion matrix register. Contains the G/U conversion coefficients */
+#define                       PIXC_BVCON  0xffc04448   /* Color space conversion matrix register. Contains the B/V conversion coefficients */
+#define                      PIXC_CCBIAS  0xffc0444c   /* Bias values for the color space conversion matrix */
+#define                          PIXC_TC  0xffc04450   /* Holds the transparent color value */
+
+/* Handshake MDMA 0 Registers */
+
+#define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
+#define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
+#define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
+#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshold Register */
+#define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
+#define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
+#define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
+
+/* Handshake MDMA 1 Registers */
+
+#define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
+#define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
+#define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
+#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshold Register */
+#define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
+#define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
+#define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
+
+
+/* ********************************************************** */
+/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
+/*     and MULTI BIT READ MACROS                              */
+/* ********************************************************** */
+
+/* Bit masks for PIXC_CTL */
+
+#define                   PIXC_EN  0x1        /* Pixel Compositor Enable */
+#define                  OVR_A_EN  0x2        /* Overlay A Enable */
+#define                  OVR_B_EN  0x4        /* Overlay B Enable */
+#define                  IMG_FORM  0x8        /* Image Data Format */
+#define                  OVR_FORM  0x10       /* Overlay Data Format */
+#define                  OUT_FORM  0x20       /* Output Data Format */
+#define                   UDS_MOD  0x40       /* Resampling Mode */
+#define                     TC_EN  0x80       /* Transparent Color Enable */
+#define                  IMG_STAT  0x300      /* Image FIFO Status */
+#define                  OVR_STAT  0xc00      /* Overlay FIFO Status */
+#define                    WM_LVL  0x3000     /* FIFO Watermark Level */
+
+/* Bit masks for PIXC_AHSTART */
+
+#define                  A_HSTART  0xfff      /* Horizontal Start Coordinates */
+
+/* Bit masks for PIXC_AHEND */
+
+#define                    A_HEND  0xfff      /* Horizontal End Coordinates */
+
+/* Bit masks for PIXC_AVSTART */
+
+#define                  A_VSTART  0x3ff      /* Vertical Start Coordinates */
+
+/* Bit masks for PIXC_AVEND */
+
+#define                    A_VEND  0x3ff      /* Vertical End Coordinates */
+
+/* Bit masks for PIXC_ATRANSP */
+
+#define                  A_TRANSP  0xf        /* Transparency Value */
+
+/* Bit masks for PIXC_BHSTART */
+
+#define                  B_HSTART  0xfff      /* Horizontal Start Coordinates */
+
+/* Bit masks for PIXC_BHEND */
+
+#define                    B_HEND  0xfff      /* Horizontal End Coordinates */
+
+/* Bit masks for PIXC_BVSTART */
+
+#define                  B_VSTART  0x3ff      /* Vertical Start Coordinates */
+
+/* Bit masks for PIXC_BVEND */
+
+#define                    B_VEND  0x3ff      /* Vertical End Coordinates */
+
+/* Bit masks for PIXC_BTRANSP */
+
+#define                  B_TRANSP  0xf        /* Transparency Value */
+
+/* Bit masks for PIXC_INTRSTAT */
+
+#define                OVR_INT_EN  0x1        /* Interrupt at End of Last Valid Overlay */
+#define                FRM_INT_EN  0x2        /* Interrupt at End of Frame */
+#define              OVR_INT_STAT  0x4        /* Overlay Interrupt Status */
+#define              FRM_INT_STAT  0x8        /* Frame Interrupt Status */
+
+/* Bit masks for PIXC_RYCON */
+
+#define                       A11  0x3ff      /* A11 in the Coefficient Matrix */
+#define                       A12  0xffc00    /* A12 in the Coefficient Matrix */
+#define                       A13  0x3ff00000 /* A13 in the Coefficient Matrix */
+#define                  RY_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_GUCON */
+
+#define                       A21  0x3ff      /* A21 in the Coefficient Matrix */
+#define                       A22  0xffc00    /* A22 in the Coefficient Matrix */
+#define                       A23  0x3ff00000 /* A23 in the Coefficient Matrix */
+#define                  GU_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_BVCON */
+
+#define                       A31  0x3ff      /* A31 in the Coefficient Matrix */
+#define                       A32  0xffc00    /* A32 in the Coefficient Matrix */
+#define                       A33  0x3ff00000 /* A33 in the Coefficient Matrix */
+#define                  BV_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_CCBIAS */
+
+#define                       A14  0x3ff      /* A14 in the Bias Vector */
+#define                       A24  0xffc00    /* A24 in the Bias Vector */
+#define                       A34  0x3ff00000 /* A34 in the Bias Vector */
+
+/* Bit masks for PIXC_TC */
+
+#define                  RY_TRANS  0xff       /* Transparent Color - R/Y Component */
+#define                  GU_TRANS  0xff00     /* Transparent Color - G/U Component */
+#define                  BV_TRANS  0xff0000   /* Transparent Color - B/V Component */
+
+/* Bit masks for KPAD_CTL */
+
+#define                   KPAD_EN  0x1        /* Keypad Enable */
+#define              KPAD_IRQMODE  0x6        /* Key Press Interrupt Enable */
+#define                KPAD_ROWEN  0x1c00     /* Row Enable Width */
+#define                KPAD_COLEN  0xe000     /* Column Enable Width */
+
+/* Bit masks for KPAD_PRESCALE */
+
+#define         KPAD_PRESCALE_VAL  0x3f       /* Key Prescale Value */
+
+/* Bit masks for KPAD_MSEL */
+
+#define                DBON_SCALE  0xff       /* Debounce Scale Value */
+#define              COLDRV_SCALE  0xff00     /* Column Driver Scale Value */
+
+/* Bit masks for KPAD_ROWCOL */
+
+#define                  KPAD_ROW  0xff       /* Rows Pressed */
+#define                  KPAD_COL  0xff00     /* Columns Pressed */
+
+/* Bit masks for KPAD_STAT */
+
+#define                  KPAD_IRQ  0x1        /* Keypad Interrupt Status */
+#define              KPAD_MROWCOL  0x6        /* Multiple Row/Column Keypress Status */
+#define              KPAD_PRESSED  0x8        /* Key press current status */
+
+/* Bit masks for KPAD_SOFTEVAL */
+
+#define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
+
+/* Bit masks for ATAPI_CONTROL */
+
+#define                 PIO_START  0x1        /* Start PIO/Reg Op */
+#define               MULTI_START  0x2        /* Start Multi-DMA Op */
+#define               ULTRA_START  0x4        /* Start Ultra-DMA Op */
+#define                  XFER_DIR  0x8        /* Transfer Direction */
+#define                  IORDY_EN  0x10       /* IORDY Enable */
+#define                FIFO_FLUSH  0x20       /* Flush FIFOs */
+#define                  SOFT_RST  0x40       /* Soft Reset */
+#define                   DEV_RST  0x80       /* Device Reset */
+#define                TFRCNT_RST  0x100      /* Trans Count Reset */
+#define               END_ON_TERM  0x200      /* End/Terminate Select */
+#define               PIO_USE_DMA  0x400      /* PIO-DMA Enable */
+#define          UDMAIN_FIFO_THRS  0xf000     /* Ultra DMA-IN FIFO Threshold */
+
+/* Bit masks for ATAPI_STATUS */
+
+#define               PIO_XFER_ON  0x1        /* PIO transfer in progress */
+#define             MULTI_XFER_ON  0x2        /* Multi-word DMA transfer in progress */
+#define             ULTRA_XFER_ON  0x4        /* Ultra DMA transfer in progress */
+#define               ULTRA_IN_FL  0xf0       /* Ultra DMA Input FIFO Level */
+
+/* Bit masks for ATAPI_DEV_ADDR */
+
+#define                  DEV_ADDR  0x1f       /* Device Address */
+
+/* Bit masks for ATAPI_INT_MASK */
+
+#define        ATAPI_DEV_INT_MASK  0x1        /* Device interrupt mask */
+#define             PIO_DONE_MASK  0x2        /* PIO transfer done interrupt mask */
+#define           MULTI_DONE_MASK  0x4        /* Multi-DMA transfer done interrupt mask */
+#define          UDMAIN_DONE_MASK  0x8        /* Ultra-DMA in transfer done interrupt mask */
+#define         UDMAOUT_DONE_MASK  0x10       /* Ultra-DMA out transfer done interrupt mask */
+#define       HOST_TERM_XFER_MASK  0x20       /* Host terminate current transfer interrupt mask */
+#define           MULTI_TERM_MASK  0x40       /* Device terminate Multi-DMA transfer interrupt mask */
+#define          UDMAIN_TERM_MASK  0x80       /* Device terminate Ultra-DMA-in transfer interrupt mask */
+#define         UDMAOUT_TERM_MASK  0x100      /* Device terminate Ultra-DMA-out transfer interrupt mask */
+
+/* Bit masks for ATAPI_INT_STATUS */
+
+#define             ATAPI_DEV_INT  0x1        /* Device interrupt status */
+#define              PIO_DONE_INT  0x2        /* PIO transfer done interrupt status */
+#define            MULTI_DONE_INT  0x4        /* Multi-DMA transfer done interrupt status */
+#define           UDMAIN_DONE_INT  0x8        /* Ultra-DMA in transfer done interrupt status */
+#define          UDMAOUT_DONE_INT  0x10       /* Ultra-DMA out transfer done interrupt status */
+#define        HOST_TERM_XFER_INT  0x20       /* Host terminate current transfer interrupt status */
+#define            MULTI_TERM_INT  0x40       /* Device terminate Multi-DMA transfer interrupt status */
+#define           UDMAIN_TERM_INT  0x80       /* Device terminate Ultra-DMA-in transfer interrupt status */
+#define          UDMAOUT_TERM_INT  0x100      /* Device terminate Ultra-DMA-out transfer interrupt status */
+
+/* Bit masks for ATAPI_LINE_STATUS */
+
+#define                ATAPI_INTR  0x1        /* Device interrupt to host line status */
+#define                ATAPI_DASP  0x2        /* Device dasp to host line status */
+#define                ATAPI_CS0N  0x4        /* ATAPI chip select 0 line status */
+#define                ATAPI_CS1N  0x8        /* ATAPI chip select 1 line status */
+#define                ATAPI_ADDR  0x70       /* ATAPI address line status */
+#define              ATAPI_DMAREQ  0x80       /* ATAPI DMA request line status */
+#define             ATAPI_DMAACKN  0x100      /* ATAPI DMA acknowledge line status */
+#define               ATAPI_DIOWN  0x200      /* ATAPI write line status */
+#define               ATAPI_DIORN  0x400      /* ATAPI read line status */
+#define               ATAPI_IORDY  0x800      /* ATAPI IORDY line status */
+
+/* Bit masks for ATAPI_SM_STATE */
+
+#define                PIO_CSTATE  0xf        /* PIO mode state machine current state */
+#define                DMA_CSTATE  0xf0       /* DMA mode state machine current state */
+#define             UDMAIN_CSTATE  0xf00      /* Ultra DMA-In mode state machine current state */
+#define            UDMAOUT_CSTATE  0xf000     /* ATAPI IORDY line status */
+
+/* Bit masks for ATAPI_TERMINATE */
+
+#define           ATAPI_HOST_TERM  0x1        /* Host terminationation */
+
+/* Bit masks for ATAPI_REG_TIM_0 */
+
+#define                    T2_REG  0xff       /* End of cycle time for register access transfers */
+#define                  TEOC_REG  0xff00     /* Selects DIOR/DIOW pulsewidth */
+
+/* Bit masks for ATAPI_PIO_TIM_0 */
+
+#define                    T1_REG  0xf        /* Time from address valid to DIOR/DIOW */
+#define                T2_REG_PIO  0xff0      /* DIOR/DIOW pulsewidth */
+#define                    T4_REG  0xf000     /* DIOW data hold */
+
+/* Bit masks for ATAPI_PIO_TIM_1 */
+
+#define              TEOC_REG_PIO  0xff       /* End of cycle time for PIO access transfers. */
+
+/* Bit masks for ATAPI_MULTI_TIM_0 */
+
+#define                        TD  0xff       /* DIOR/DIOW asserted pulsewidth */
+#define                        TM  0xff00     /* Time from address valid to DIOR/DIOW */
+
+/* Bit masks for ATAPI_MULTI_TIM_1 */
+
+#define                       TKW  0xff       /* Selects DIOW negated pulsewidth */
+#define                       TKR  0xff00     /* Selects DIOR negated pulsewidth */
+
+/* Bit masks for ATAPI_MULTI_TIM_2 */
+
+#define                        TH  0xff       /* Selects DIOW data hold */
+#define                      TEOC  0xff00     /* Selects end of cycle for DMA */
+
+/* Bit masks for ATAPI_ULTRA_TIM_0 */
+
+#define                      TACK  0xff       /* Selects setup and hold times for TACK */
+#define                      TENV  0xff00     /* Selects envelope time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_1 */
+
+#define                      TDVS  0xff       /* Selects data valid setup time */
+#define                 TCYC_TDVS  0xff00     /* Selects cycle time - TDVS time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_2 */
+
+#define                       TSS  0xff       /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
+#define                      TMLI  0xff00     /* Selects interlock time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_3 */
+
+#define                      TZAH  0xff       /* Selects minimum delay required for output */
+#define               READY_PAUSE  0xff00     /* Selects ready to pause */
+
+/* Bit masks for TIMER_ENABLE1 */
+
+#define                    TIMEN8  0x1        /* Timer 8 Enable */
+#define                    TIMEN9  0x2        /* Timer 9 Enable */
+#define                   TIMEN10  0x4        /* Timer 10 Enable */
+
+/* Bit masks for TIMER_DISABLE1 */
+
+#define                   TIMDIS8  0x1        /* Timer 8 Disable */
+#define                   TIMDIS9  0x2        /* Timer 9 Disable */
+#define                  TIMDIS10  0x4        /* Timer 10 Disable */
+
+/* Bit masks for TIMER_STATUS1 */
+
+#define                    TIMIL8  0x1        /* Timer 8 Interrupt */
+#define                    TIMIL9  0x2        /* Timer 9 Interrupt */
+#define                   TIMIL10  0x4        /* Timer 10 Interrupt */
+#define                 TOVF_ERR8  0x10       /* Timer 8 Counter Overflow */
+#define                 TOVF_ERR9  0x20       /* Timer 9 Counter Overflow */
+#define                TOVF_ERR10  0x40       /* Timer 10 Counter Overflow */
+#define                     TRUN8  0x1000     /* Timer 8 Slave Enable Status */
+#define                     TRUN9  0x2000     /* Timer 9 Slave Enable Status */
+#define                    TRUN10  0x4000     /* Timer 10 Slave Enable Status */
+
+/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
+
+/* Bit masks for USB_FADDR */
+
+#define          FUNCTION_ADDRESS  0x7f       /* Function address */
+
+/* Bit masks for USB_POWER */
+
+#define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
+#define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
+#define               RESUME_MODE  0x4        /* DMA Mode */
+#define                     RESET  0x8        /* Reset indicator */
+#define                   HS_MODE  0x10       /* High Speed mode indicator */
+#define                 HS_ENABLE  0x20       /* high Speed Enable */
+#define                 SOFT_CONN  0x40       /* Soft connect */
+#define                ISO_UPDATE  0x80       /* Isochronous update */
+
+/* Bit masks for USB_INTRTX */
+
+#define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
+#define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
+#define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
+#define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
+#define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
+#define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
+#define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
+#define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRRX */
+
+#define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
+#define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
+#define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
+#define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
+#define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
+#define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
+#define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRTXE */
+
+#define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
+#define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
+#define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
+#define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
+#define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
+#define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
+#define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
+#define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
+
+/* Bit masks for USB_INTRRXE */
+
+#define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
+#define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
+#define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
+#define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
+#define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
+#define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
+#define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
+
+/* Bit masks for USB_INTRUSB */
+
+#define                 SUSPEND_B  0x1        /* Suspend indicator */
+#define                  RESUME_B  0x2        /* Resume indicator */
+#define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
+#define                     SOF_B  0x8        /* Start of frame */
+#define                    CONN_B  0x10       /* Connection indicator */
+#define                  DISCON_B  0x20       /* Disconnect indicator */
+#define             SESSION_REQ_B  0x40       /* Session Request */
+#define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
+
+/* Bit masks for USB_INTRUSBE */
+
+#define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
+#define                 RESUME_BE  0x2        /* Resume indicator int enable */
+#define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
+#define                    SOF_BE  0x8        /* Start of frame int enable */
+#define                   CONN_BE  0x10       /* Connection indicator int enable */
+#define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
+#define            SESSION_REQ_BE  0x40       /* Session Request int enable */
+#define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
+
+/* Bit masks for USB_FRAME */
+
+#define              FRAME_NUMBER  0x7ff      /* Frame number */
+
+/* Bit masks for USB_INDEX */
+
+#define         SELECTED_ENDPOINT  0xf        /* selected endpoint */
+
+/* Bit masks for USB_GLOBAL_CTL */
+
+#define                GLOBAL_ENA  0x1        /* enables USB module */
+#define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
+#define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
+#define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
+#define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
+#define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
+#define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
+#define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
+#define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
+#define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
+#define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
+#define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
+#define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
+#define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
+#define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
+
+/* Bit masks for USB_OTG_DEV_CTL */
+
+#define                   SESSION  0x1        /* session indicator */
+#define                  HOST_REQ  0x2        /* Host negotiation request */
+#define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
+#define                     VBUS0  0x8        /* Vbus level indicator[0] */
+#define                     VBUS1  0x10       /* Vbus level indicator[1] */
+#define                     LSDEV  0x20       /* Low-speed indicator */
+#define                     FSDEV  0x40       /* Full or High-speed indicator */
+#define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
+
+/* Bit masks for USB_OTG_VBUS_IRQ */
+
+#define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
+#define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
+#define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
+#define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
+#define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
+#define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
+
+/* Bit masks for USB_OTG_VBUS_MASK */
+
+#define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
+#define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
+#define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
+#define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
+#define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
+#define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
+
+/* Bit masks for USB_CSR0 */
+
+#define                  RXPKTRDY  0x1        /* data packet receive indicator */
+#define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
+#define                STALL_SENT  0x4        /* STALL handshake sent */
+#define                   DATAEND  0x8        /* Data end indicator */
+#define                  SETUPEND  0x10       /* Setup end */
+#define                 SENDSTALL  0x20       /* Send STALL handshake */
+#define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
+#define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
+#define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
+#define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
+#define                SETUPPKT_H  0x8        /* send Setup token host mode */
+#define                   ERROR_H  0x10       /* timeout error indicator host mode */
+#define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
+#define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
+#define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
+
+/* Bit masks for USB_COUNT0 */
+
+#define              EP0_RX_COUNT  0x7f       /* number of received bytes in EP0 FIFO */
+
+/* Bit masks for USB_NAKLIMIT0 */
+
+#define             EP0_NAK_LIMIT  0x1f       /* number of frames/micro frames after which EP0 timeouts */
+
+/* Bit masks for USB_TX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_T  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_RX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_R  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_TXCSR */
+
+#define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
+#define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
+#define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
+#define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
+#define              STALL_SEND_T  0x10       /* issue a Stall handshake */
+#define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
+#define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
+#define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
+#define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
+#define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
+#define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
+#define                     ISO_T  0x4000     /* enable Isochronous transfers */
+#define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
+#define                  ERROR_TH  0x4        /* error condition host mode */
+#define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
+#define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
+
+/* Bit masks for USB_TXCOUNT */
+
+#define                  TX_COUNT  0x1fff     /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* Bit masks for USB_RXCSR */
+
+#define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
+#define               FIFO_FULL_R  0x2        /* FIFO not empty */
+#define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
+#define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
+#define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
+#define              STALL_SEND_R  0x20       /* issue a Stall handshake */
+#define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
+#define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
+#define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
+#define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
+#define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
+#define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
+#define                     ISO_R  0x4000     /* enable Isochronous transfers */
+#define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
+#define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
+#define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
+#define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
+#define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
+#define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
+#define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
+
+/* Bit masks for USB_RXCOUNT */
+
+#define                  RX_COUNT  0x1fff     /* Number of received bytes in the packet in the Rx FIFO */
+
+/* Bit masks for USB_TXTYPE */
+
+#define            TARGET_EP_NO_T  0xf        /* EP number */
+#define                PROTOCOL_T  0xc        /* transfer type */
+
+/* Bit masks for USB_TXINTERVAL */
+
+#define          TX_POLL_INTERVAL  0xff       /* polling interval for selected Tx EP */
+
+/* Bit masks for USB_RXTYPE */
+
+#define            TARGET_EP_NO_R  0xf        /* EP number */
+#define                PROTOCOL_R  0xc        /* transfer type */
+
+/* Bit masks for USB_RXINTERVAL */
+
+#define          RX_POLL_INTERVAL  0xff       /* polling interval for selected Rx EP */
+
+/* Bit masks for USB_DMA_INTERRUPT */
+
+#define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
+#define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
+#define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
+#define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
+#define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
+#define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
+#define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
+#define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
+
+/* Bit masks for USB_DMAxCONTROL */
+
+#define                   DMA_ENA  0x1        /* DMA enable */
+#define                 DIRECTION  0x2        /* direction of DMA transfer */
+#define                      MODE  0x4        /* DMA Bus error */
+#define                   INT_ENA  0x8        /* Interrupt enable */
+#define                     EPNUM  0xf0       /* EP number */
+#define                  BUSERROR  0x100      /* DMA Bus error */
+
+/* Bit masks for USB_DMAxADDRHIGH */
+
+#define             DMA_ADDR_HIGH  0xffff     /* Upper 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxADDRLOW */
+
+#define              DMA_ADDR_LOW  0xffff     /* Lower 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTHIGH */
+
+#define            DMA_COUNT_HIGH  0xffff     /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTLOW */
+
+#define             DMA_COUNT_LOW  0xffff     /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
+
+#endif /* _DEF_BF547_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF548.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF548.h
new file mode 100644
index 0000000..27f2948
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF548.h
@@ -0,0 +1,399 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF548_H
+#define _DEF_BF548_H
+
+/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
+#include "defBF54x_base.h"
+
+/* The BF548 is like the BF547, but has additional CANs */
+#include "defBF547.h"
+
+/* CAN Controller 1 Config 1 Registers */
+
+#define                         CAN1_MC1  0xffc03200   /* CAN Controller 1 Mailbox Configuration Register 1 */
+#define                         CAN1_MD1  0xffc03204   /* CAN Controller 1 Mailbox Direction Register 1 */
+#define                        CAN1_TRS1  0xffc03208   /* CAN Controller 1 Transmit Request Set Register 1 */
+#define                        CAN1_TRR1  0xffc0320c   /* CAN Controller 1 Transmit Request Reset Register 1 */
+#define                         CAN1_TA1  0xffc03210   /* CAN Controller 1 Transmit Acknowledge Register 1 */
+#define                         CAN1_AA1  0xffc03214   /* CAN Controller 1 Abort Acknowledge Register 1 */
+#define                        CAN1_RMP1  0xffc03218   /* CAN Controller 1 Receive Message Pending Register 1 */
+#define                        CAN1_RML1  0xffc0321c   /* CAN Controller 1 Receive Message Lost Register 1 */
+#define                      CAN1_MBTIF1  0xffc03220   /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */
+#define                      CAN1_MBRIF1  0xffc03224   /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */
+#define                       CAN1_MBIM1  0xffc03228   /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */
+#define                        CAN1_RFH1  0xffc0322c   /* CAN Controller 1 Remote Frame Handling Enable Register 1 */
+#define                       CAN1_OPSS1  0xffc03230   /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */
+
+/* CAN Controller 1 Config 2 Registers */
+
+#define                         CAN1_MC2  0xffc03240   /* CAN Controller 1 Mailbox Configuration Register 2 */
+#define                         CAN1_MD2  0xffc03244   /* CAN Controller 1 Mailbox Direction Register 2 */
+#define                        CAN1_TRS2  0xffc03248   /* CAN Controller 1 Transmit Request Set Register 2 */
+#define                        CAN1_TRR2  0xffc0324c   /* CAN Controller 1 Transmit Request Reset Register 2 */
+#define                         CAN1_TA2  0xffc03250   /* CAN Controller 1 Transmit Acknowledge Register 2 */
+#define                         CAN1_AA2  0xffc03254   /* CAN Controller 1 Abort Acknowledge Register 2 */
+#define                        CAN1_RMP2  0xffc03258   /* CAN Controller 1 Receive Message Pending Register 2 */
+#define                        CAN1_RML2  0xffc0325c   /* CAN Controller 1 Receive Message Lost Register 2 */
+#define                      CAN1_MBTIF2  0xffc03260   /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */
+#define                      CAN1_MBRIF2  0xffc03264   /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */
+#define                       CAN1_MBIM2  0xffc03268   /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */
+#define                        CAN1_RFH2  0xffc0326c   /* CAN Controller 1 Remote Frame Handling Enable Register 2 */
+#define                       CAN1_OPSS2  0xffc03270   /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */
+
+/* CAN Controller 1 Clock/Interrupt/Counter Registers */
+
+#define                       CAN1_CLOCK  0xffc03280   /* CAN Controller 1 Clock Register */
+#define                      CAN1_TIMING  0xffc03284   /* CAN Controller 1 Timing Register */
+#define                       CAN1_DEBUG  0xffc03288   /* CAN Controller 1 Debug Register */
+#define                      CAN1_STATUS  0xffc0328c   /* CAN Controller 1 Global Status Register */
+#define                         CAN1_CEC  0xffc03290   /* CAN Controller 1 Error Counter Register */
+#define                         CAN1_GIS  0xffc03294   /* CAN Controller 1 Global Interrupt Status Register */
+#define                         CAN1_GIM  0xffc03298   /* CAN Controller 1 Global Interrupt Mask Register */
+#define                         CAN1_GIF  0xffc0329c   /* CAN Controller 1 Global Interrupt Flag Register */
+#define                     CAN1_CONTROL  0xffc032a0   /* CAN Controller 1 Master Control Register */
+#define                        CAN1_INTR  0xffc032a4   /* CAN Controller 1 Interrupt Pending Register */
+#define                        CAN1_MBTD  0xffc032ac   /* CAN Controller 1 Mailbox Temporary Disable Register */
+#define                         CAN1_EWR  0xffc032b0   /* CAN Controller 1 Programmable Warning Level Register */
+#define                         CAN1_ESR  0xffc032b4   /* CAN Controller 1 Error Status Register */
+#define                       CAN1_UCCNT  0xffc032c4   /* CAN Controller 1 Universal Counter Register */
+#define                        CAN1_UCRC  0xffc032c8   /* CAN Controller 1 Universal Counter Force Reload Register */
+#define                       CAN1_UCCNF  0xffc032cc   /* CAN Controller 1 Universal Counter Configuration Register */
+
+/* CAN Controller 1 Mailbox Acceptance Registers */
+
+#define                       CAN1_AM00L  0xffc03300   /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */
+#define                       CAN1_AM00H  0xffc03304   /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */
+#define                       CAN1_AM01L  0xffc03308   /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */
+#define                       CAN1_AM01H  0xffc0330c   /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */
+#define                       CAN1_AM02L  0xffc03310   /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */
+#define                       CAN1_AM02H  0xffc03314   /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */
+#define                       CAN1_AM03L  0xffc03318   /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */
+#define                       CAN1_AM03H  0xffc0331c   /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */
+#define                       CAN1_AM04L  0xffc03320   /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */
+#define                       CAN1_AM04H  0xffc03324   /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */
+#define                       CAN1_AM05L  0xffc03328   /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */
+#define                       CAN1_AM05H  0xffc0332c   /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */
+#define                       CAN1_AM06L  0xffc03330   /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */
+#define                       CAN1_AM06H  0xffc03334   /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */
+#define                       CAN1_AM07L  0xffc03338   /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */
+#define                       CAN1_AM07H  0xffc0333c   /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */
+#define                       CAN1_AM08L  0xffc03340   /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */
+#define                       CAN1_AM08H  0xffc03344   /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */
+#define                       CAN1_AM09L  0xffc03348   /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */
+#define                       CAN1_AM09H  0xffc0334c   /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */
+#define                       CAN1_AM10L  0xffc03350   /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */
+#define                       CAN1_AM10H  0xffc03354   /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */
+#define                       CAN1_AM11L  0xffc03358   /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */
+#define                       CAN1_AM11H  0xffc0335c   /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */
+#define                       CAN1_AM12L  0xffc03360   /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */
+#define                       CAN1_AM12H  0xffc03364   /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */
+#define                       CAN1_AM13L  0xffc03368   /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */
+#define                       CAN1_AM13H  0xffc0336c   /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */
+#define                       CAN1_AM14L  0xffc03370   /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */
+#define                       CAN1_AM14H  0xffc03374   /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */
+#define                       CAN1_AM15L  0xffc03378   /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */
+#define                       CAN1_AM15H  0xffc0337c   /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */
+
+/* CAN Controller 1 Mailbox Acceptance Registers */
+
+#define                       CAN1_AM16L  0xffc03380   /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */
+#define                       CAN1_AM16H  0xffc03384   /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */
+#define                       CAN1_AM17L  0xffc03388   /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */
+#define                       CAN1_AM17H  0xffc0338c   /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */
+#define                       CAN1_AM18L  0xffc03390   /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */
+#define                       CAN1_AM18H  0xffc03394   /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */
+#define                       CAN1_AM19L  0xffc03398   /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */
+#define                       CAN1_AM19H  0xffc0339c   /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */
+#define                       CAN1_AM20L  0xffc033a0   /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */
+#define                       CAN1_AM20H  0xffc033a4   /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */
+#define                       CAN1_AM21L  0xffc033a8   /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */
+#define                       CAN1_AM21H  0xffc033ac   /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */
+#define                       CAN1_AM22L  0xffc033b0   /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */
+#define                       CAN1_AM22H  0xffc033b4   /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */
+#define                       CAN1_AM23L  0xffc033b8   /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */
+#define                       CAN1_AM23H  0xffc033bc   /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */
+#define                       CAN1_AM24L  0xffc033c0   /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */
+#define                       CAN1_AM24H  0xffc033c4   /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */
+#define                       CAN1_AM25L  0xffc033c8   /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */
+#define                       CAN1_AM25H  0xffc033cc   /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */
+#define                       CAN1_AM26L  0xffc033d0   /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */
+#define                       CAN1_AM26H  0xffc033d4   /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */
+#define                       CAN1_AM27L  0xffc033d8   /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */
+#define                       CAN1_AM27H  0xffc033dc   /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */
+#define                       CAN1_AM28L  0xffc033e0   /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */
+#define                       CAN1_AM28H  0xffc033e4   /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */
+#define                       CAN1_AM29L  0xffc033e8   /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */
+#define                       CAN1_AM29H  0xffc033ec   /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */
+#define                       CAN1_AM30L  0xffc033f0   /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */
+#define                       CAN1_AM30H  0xffc033f4   /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */
+#define                       CAN1_AM31L  0xffc033f8   /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */
+#define                       CAN1_AM31H  0xffc033fc   /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define                  CAN1_MB00_DATA0  0xffc03400   /* CAN Controller 1 Mailbox 0 Data 0 Register */
+#define                  CAN1_MB00_DATA1  0xffc03404   /* CAN Controller 1 Mailbox 0 Data 1 Register */
+#define                  CAN1_MB00_DATA2  0xffc03408   /* CAN Controller 1 Mailbox 0 Data 2 Register */
+#define                  CAN1_MB00_DATA3  0xffc0340c   /* CAN Controller 1 Mailbox 0 Data 3 Register */
+#define                 CAN1_MB00_LENGTH  0xffc03410   /* CAN Controller 1 Mailbox 0 Length Register */
+#define              CAN1_MB00_TIMESTAMP  0xffc03414   /* CAN Controller 1 Mailbox 0 Timestamp Register */
+#define                    CAN1_MB00_ID0  0xffc03418   /* CAN Controller 1 Mailbox 0 ID0 Register */
+#define                    CAN1_MB00_ID1  0xffc0341c   /* CAN Controller 1 Mailbox 0 ID1 Register */
+#define                  CAN1_MB01_DATA0  0xffc03420   /* CAN Controller 1 Mailbox 1 Data 0 Register */
+#define                  CAN1_MB01_DATA1  0xffc03424   /* CAN Controller 1 Mailbox 1 Data 1 Register */
+#define                  CAN1_MB01_DATA2  0xffc03428   /* CAN Controller 1 Mailbox 1 Data 2 Register */
+#define                  CAN1_MB01_DATA3  0xffc0342c   /* CAN Controller 1 Mailbox 1 Data 3 Register */
+#define                 CAN1_MB01_LENGTH  0xffc03430   /* CAN Controller 1 Mailbox 1 Length Register */
+#define              CAN1_MB01_TIMESTAMP  0xffc03434   /* CAN Controller 1 Mailbox 1 Timestamp Register */
+#define                    CAN1_MB01_ID0  0xffc03438   /* CAN Controller 1 Mailbox 1 ID0 Register */
+#define                    CAN1_MB01_ID1  0xffc0343c   /* CAN Controller 1 Mailbox 1 ID1 Register */
+#define                  CAN1_MB02_DATA0  0xffc03440   /* CAN Controller 1 Mailbox 2 Data 0 Register */
+#define                  CAN1_MB02_DATA1  0xffc03444   /* CAN Controller 1 Mailbox 2 Data 1 Register */
+#define                  CAN1_MB02_DATA2  0xffc03448   /* CAN Controller 1 Mailbox 2 Data 2 Register */
+#define                  CAN1_MB02_DATA3  0xffc0344c   /* CAN Controller 1 Mailbox 2 Data 3 Register */
+#define                 CAN1_MB02_LENGTH  0xffc03450   /* CAN Controller 1 Mailbox 2 Length Register */
+#define              CAN1_MB02_TIMESTAMP  0xffc03454   /* CAN Controller 1 Mailbox 2 Timestamp Register */
+#define                    CAN1_MB02_ID0  0xffc03458   /* CAN Controller 1 Mailbox 2 ID0 Register */
+#define                    CAN1_MB02_ID1  0xffc0345c   /* CAN Controller 1 Mailbox 2 ID1 Register */
+#define                  CAN1_MB03_DATA0  0xffc03460   /* CAN Controller 1 Mailbox 3 Data 0 Register */
+#define                  CAN1_MB03_DATA1  0xffc03464   /* CAN Controller 1 Mailbox 3 Data 1 Register */
+#define                  CAN1_MB03_DATA2  0xffc03468   /* CAN Controller 1 Mailbox 3 Data 2 Register */
+#define                  CAN1_MB03_DATA3  0xffc0346c   /* CAN Controller 1 Mailbox 3 Data 3 Register */
+#define                 CAN1_MB03_LENGTH  0xffc03470   /* CAN Controller 1 Mailbox 3 Length Register */
+#define              CAN1_MB03_TIMESTAMP  0xffc03474   /* CAN Controller 1 Mailbox 3 Timestamp Register */
+#define                    CAN1_MB03_ID0  0xffc03478   /* CAN Controller 1 Mailbox 3 ID0 Register */
+#define                    CAN1_MB03_ID1  0xffc0347c   /* CAN Controller 1 Mailbox 3 ID1 Register */
+#define                  CAN1_MB04_DATA0  0xffc03480   /* CAN Controller 1 Mailbox 4 Data 0 Register */
+#define                  CAN1_MB04_DATA1  0xffc03484   /* CAN Controller 1 Mailbox 4 Data 1 Register */
+#define                  CAN1_MB04_DATA2  0xffc03488   /* CAN Controller 1 Mailbox 4 Data 2 Register */
+#define                  CAN1_MB04_DATA3  0xffc0348c   /* CAN Controller 1 Mailbox 4 Data 3 Register */
+#define                 CAN1_MB04_LENGTH  0xffc03490   /* CAN Controller 1 Mailbox 4 Length Register */
+#define              CAN1_MB04_TIMESTAMP  0xffc03494   /* CAN Controller 1 Mailbox 4 Timestamp Register */
+#define                    CAN1_MB04_ID0  0xffc03498   /* CAN Controller 1 Mailbox 4 ID0 Register */
+#define                    CAN1_MB04_ID1  0xffc0349c   /* CAN Controller 1 Mailbox 4 ID1 Register */
+#define                  CAN1_MB05_DATA0  0xffc034a0   /* CAN Controller 1 Mailbox 5 Data 0 Register */
+#define                  CAN1_MB05_DATA1  0xffc034a4   /* CAN Controller 1 Mailbox 5 Data 1 Register */
+#define                  CAN1_MB05_DATA2  0xffc034a8   /* CAN Controller 1 Mailbox 5 Data 2 Register */
+#define                  CAN1_MB05_DATA3  0xffc034ac   /* CAN Controller 1 Mailbox 5 Data 3 Register */
+#define                 CAN1_MB05_LENGTH  0xffc034b0   /* CAN Controller 1 Mailbox 5 Length Register */
+#define              CAN1_MB05_TIMESTAMP  0xffc034b4   /* CAN Controller 1 Mailbox 5 Timestamp Register */
+#define                    CAN1_MB05_ID0  0xffc034b8   /* CAN Controller 1 Mailbox 5 ID0 Register */
+#define                    CAN1_MB05_ID1  0xffc034bc   /* CAN Controller 1 Mailbox 5 ID1 Register */
+#define                  CAN1_MB06_DATA0  0xffc034c0   /* CAN Controller 1 Mailbox 6 Data 0 Register */
+#define                  CAN1_MB06_DATA1  0xffc034c4   /* CAN Controller 1 Mailbox 6 Data 1 Register */
+#define                  CAN1_MB06_DATA2  0xffc034c8   /* CAN Controller 1 Mailbox 6 Data 2 Register */
+#define                  CAN1_MB06_DATA3  0xffc034cc   /* CAN Controller 1 Mailbox 6 Data 3 Register */
+#define                 CAN1_MB06_LENGTH  0xffc034d0   /* CAN Controller 1 Mailbox 6 Length Register */
+#define              CAN1_MB06_TIMESTAMP  0xffc034d4   /* CAN Controller 1 Mailbox 6 Timestamp Register */
+#define                    CAN1_MB06_ID0  0xffc034d8   /* CAN Controller 1 Mailbox 6 ID0 Register */
+#define                    CAN1_MB06_ID1  0xffc034dc   /* CAN Controller 1 Mailbox 6 ID1 Register */
+#define                  CAN1_MB07_DATA0  0xffc034e0   /* CAN Controller 1 Mailbox 7 Data 0 Register */
+#define                  CAN1_MB07_DATA1  0xffc034e4   /* CAN Controller 1 Mailbox 7 Data 1 Register */
+#define                  CAN1_MB07_DATA2  0xffc034e8   /* CAN Controller 1 Mailbox 7 Data 2 Register */
+#define                  CAN1_MB07_DATA3  0xffc034ec   /* CAN Controller 1 Mailbox 7 Data 3 Register */
+#define                 CAN1_MB07_LENGTH  0xffc034f0   /* CAN Controller 1 Mailbox 7 Length Register */
+#define              CAN1_MB07_TIMESTAMP  0xffc034f4   /* CAN Controller 1 Mailbox 7 Timestamp Register */
+#define                    CAN1_MB07_ID0  0xffc034f8   /* CAN Controller 1 Mailbox 7 ID0 Register */
+#define                    CAN1_MB07_ID1  0xffc034fc   /* CAN Controller 1 Mailbox 7 ID1 Register */
+#define                  CAN1_MB08_DATA0  0xffc03500   /* CAN Controller 1 Mailbox 8 Data 0 Register */
+#define                  CAN1_MB08_DATA1  0xffc03504   /* CAN Controller 1 Mailbox 8 Data 1 Register */
+#define                  CAN1_MB08_DATA2  0xffc03508   /* CAN Controller 1 Mailbox 8 Data 2 Register */
+#define                  CAN1_MB08_DATA3  0xffc0350c   /* CAN Controller 1 Mailbox 8 Data 3 Register */
+#define                 CAN1_MB08_LENGTH  0xffc03510   /* CAN Controller 1 Mailbox 8 Length Register */
+#define              CAN1_MB08_TIMESTAMP  0xffc03514   /* CAN Controller 1 Mailbox 8 Timestamp Register */
+#define                    CAN1_MB08_ID0  0xffc03518   /* CAN Controller 1 Mailbox 8 ID0 Register */
+#define                    CAN1_MB08_ID1  0xffc0351c   /* CAN Controller 1 Mailbox 8 ID1 Register */
+#define                  CAN1_MB09_DATA0  0xffc03520   /* CAN Controller 1 Mailbox 9 Data 0 Register */
+#define                  CAN1_MB09_DATA1  0xffc03524   /* CAN Controller 1 Mailbox 9 Data 1 Register */
+#define                  CAN1_MB09_DATA2  0xffc03528   /* CAN Controller 1 Mailbox 9 Data 2 Register */
+#define                  CAN1_MB09_DATA3  0xffc0352c   /* CAN Controller 1 Mailbox 9 Data 3 Register */
+#define                 CAN1_MB09_LENGTH  0xffc03530   /* CAN Controller 1 Mailbox 9 Length Register */
+#define              CAN1_MB09_TIMESTAMP  0xffc03534   /* CAN Controller 1 Mailbox 9 Timestamp Register */
+#define                    CAN1_MB09_ID0  0xffc03538   /* CAN Controller 1 Mailbox 9 ID0 Register */
+#define                    CAN1_MB09_ID1  0xffc0353c   /* CAN Controller 1 Mailbox 9 ID1 Register */
+#define                  CAN1_MB10_DATA0  0xffc03540   /* CAN Controller 1 Mailbox 10 Data 0 Register */
+#define                  CAN1_MB10_DATA1  0xffc03544   /* CAN Controller 1 Mailbox 10 Data 1 Register */
+#define                  CAN1_MB10_DATA2  0xffc03548   /* CAN Controller 1 Mailbox 10 Data 2 Register */
+#define                  CAN1_MB10_DATA3  0xffc0354c   /* CAN Controller 1 Mailbox 10 Data 3 Register */
+#define                 CAN1_MB10_LENGTH  0xffc03550   /* CAN Controller 1 Mailbox 10 Length Register */
+#define              CAN1_MB10_TIMESTAMP  0xffc03554   /* CAN Controller 1 Mailbox 10 Timestamp Register */
+#define                    CAN1_MB10_ID0  0xffc03558   /* CAN Controller 1 Mailbox 10 ID0 Register */
+#define                    CAN1_MB10_ID1  0xffc0355c   /* CAN Controller 1 Mailbox 10 ID1 Register */
+#define                  CAN1_MB11_DATA0  0xffc03560   /* CAN Controller 1 Mailbox 11 Data 0 Register */
+#define                  CAN1_MB11_DATA1  0xffc03564   /* CAN Controller 1 Mailbox 11 Data 1 Register */
+#define                  CAN1_MB11_DATA2  0xffc03568   /* CAN Controller 1 Mailbox 11 Data 2 Register */
+#define                  CAN1_MB11_DATA3  0xffc0356c   /* CAN Controller 1 Mailbox 11 Data 3 Register */
+#define                 CAN1_MB11_LENGTH  0xffc03570   /* CAN Controller 1 Mailbox 11 Length Register */
+#define              CAN1_MB11_TIMESTAMP  0xffc03574   /* CAN Controller 1 Mailbox 11 Timestamp Register */
+#define                    CAN1_MB11_ID0  0xffc03578   /* CAN Controller 1 Mailbox 11 ID0 Register */
+#define                    CAN1_MB11_ID1  0xffc0357c   /* CAN Controller 1 Mailbox 11 ID1 Register */
+#define                  CAN1_MB12_DATA0  0xffc03580   /* CAN Controller 1 Mailbox 12 Data 0 Register */
+#define                  CAN1_MB12_DATA1  0xffc03584   /* CAN Controller 1 Mailbox 12 Data 1 Register */
+#define                  CAN1_MB12_DATA2  0xffc03588   /* CAN Controller 1 Mailbox 12 Data 2 Register */
+#define                  CAN1_MB12_DATA3  0xffc0358c   /* CAN Controller 1 Mailbox 12 Data 3 Register */
+#define                 CAN1_MB12_LENGTH  0xffc03590   /* CAN Controller 1 Mailbox 12 Length Register */
+#define              CAN1_MB12_TIMESTAMP  0xffc03594   /* CAN Controller 1 Mailbox 12 Timestamp Register */
+#define                    CAN1_MB12_ID0  0xffc03598   /* CAN Controller 1 Mailbox 12 ID0 Register */
+#define                    CAN1_MB12_ID1  0xffc0359c   /* CAN Controller 1 Mailbox 12 ID1 Register */
+#define                  CAN1_MB13_DATA0  0xffc035a0   /* CAN Controller 1 Mailbox 13 Data 0 Register */
+#define                  CAN1_MB13_DATA1  0xffc035a4   /* CAN Controller 1 Mailbox 13 Data 1 Register */
+#define                  CAN1_MB13_DATA2  0xffc035a8   /* CAN Controller 1 Mailbox 13 Data 2 Register */
+#define                  CAN1_MB13_DATA3  0xffc035ac   /* CAN Controller 1 Mailbox 13 Data 3 Register */
+#define                 CAN1_MB13_LENGTH  0xffc035b0   /* CAN Controller 1 Mailbox 13 Length Register */
+#define              CAN1_MB13_TIMESTAMP  0xffc035b4   /* CAN Controller 1 Mailbox 13 Timestamp Register */
+#define                    CAN1_MB13_ID0  0xffc035b8   /* CAN Controller 1 Mailbox 13 ID0 Register */
+#define                    CAN1_MB13_ID1  0xffc035bc   /* CAN Controller 1 Mailbox 13 ID1 Register */
+#define                  CAN1_MB14_DATA0  0xffc035c0   /* CAN Controller 1 Mailbox 14 Data 0 Register */
+#define                  CAN1_MB14_DATA1  0xffc035c4   /* CAN Controller 1 Mailbox 14 Data 1 Register */
+#define                  CAN1_MB14_DATA2  0xffc035c8   /* CAN Controller 1 Mailbox 14 Data 2 Register */
+#define                  CAN1_MB14_DATA3  0xffc035cc   /* CAN Controller 1 Mailbox 14 Data 3 Register */
+#define                 CAN1_MB14_LENGTH  0xffc035d0   /* CAN Controller 1 Mailbox 14 Length Register */
+#define              CAN1_MB14_TIMESTAMP  0xffc035d4   /* CAN Controller 1 Mailbox 14 Timestamp Register */
+#define                    CAN1_MB14_ID0  0xffc035d8   /* CAN Controller 1 Mailbox 14 ID0 Register */
+#define                    CAN1_MB14_ID1  0xffc035dc   /* CAN Controller 1 Mailbox 14 ID1 Register */
+#define                  CAN1_MB15_DATA0  0xffc035e0   /* CAN Controller 1 Mailbox 15 Data 0 Register */
+#define                  CAN1_MB15_DATA1  0xffc035e4   /* CAN Controller 1 Mailbox 15 Data 1 Register */
+#define                  CAN1_MB15_DATA2  0xffc035e8   /* CAN Controller 1 Mailbox 15 Data 2 Register */
+#define                  CAN1_MB15_DATA3  0xffc035ec   /* CAN Controller 1 Mailbox 15 Data 3 Register */
+#define                 CAN1_MB15_LENGTH  0xffc035f0   /* CAN Controller 1 Mailbox 15 Length Register */
+#define              CAN1_MB15_TIMESTAMP  0xffc035f4   /* CAN Controller 1 Mailbox 15 Timestamp Register */
+#define                    CAN1_MB15_ID0  0xffc035f8   /* CAN Controller 1 Mailbox 15 ID0 Register */
+#define                    CAN1_MB15_ID1  0xffc035fc   /* CAN Controller 1 Mailbox 15 ID1 Register */
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define                  CAN1_MB16_DATA0  0xffc03600   /* CAN Controller 1 Mailbox 16 Data 0 Register */
+#define                  CAN1_MB16_DATA1  0xffc03604   /* CAN Controller 1 Mailbox 16 Data 1 Register */
+#define                  CAN1_MB16_DATA2  0xffc03608   /* CAN Controller 1 Mailbox 16 Data 2 Register */
+#define                  CAN1_MB16_DATA3  0xffc0360c   /* CAN Controller 1 Mailbox 16 Data 3 Register */
+#define                 CAN1_MB16_LENGTH  0xffc03610   /* CAN Controller 1 Mailbox 16 Length Register */
+#define              CAN1_MB16_TIMESTAMP  0xffc03614   /* CAN Controller 1 Mailbox 16 Timestamp Register */
+#define                    CAN1_MB16_ID0  0xffc03618   /* CAN Controller 1 Mailbox 16 ID0 Register */
+#define                    CAN1_MB16_ID1  0xffc0361c   /* CAN Controller 1 Mailbox 16 ID1 Register */
+#define                  CAN1_MB17_DATA0  0xffc03620   /* CAN Controller 1 Mailbox 17 Data 0 Register */
+#define                  CAN1_MB17_DATA1  0xffc03624   /* CAN Controller 1 Mailbox 17 Data 1 Register */
+#define                  CAN1_MB17_DATA2  0xffc03628   /* CAN Controller 1 Mailbox 17 Data 2 Register */
+#define                  CAN1_MB17_DATA3  0xffc0362c   /* CAN Controller 1 Mailbox 17 Data 3 Register */
+#define                 CAN1_MB17_LENGTH  0xffc03630   /* CAN Controller 1 Mailbox 17 Length Register */
+#define              CAN1_MB17_TIMESTAMP  0xffc03634   /* CAN Controller 1 Mailbox 17 Timestamp Register */
+#define                    CAN1_MB17_ID0  0xffc03638   /* CAN Controller 1 Mailbox 17 ID0 Register */
+#define                    CAN1_MB17_ID1  0xffc0363c   /* CAN Controller 1 Mailbox 17 ID1 Register */
+#define                  CAN1_MB18_DATA0  0xffc03640   /* CAN Controller 1 Mailbox 18 Data 0 Register */
+#define                  CAN1_MB18_DATA1  0xffc03644   /* CAN Controller 1 Mailbox 18 Data 1 Register */
+#define                  CAN1_MB18_DATA2  0xffc03648   /* CAN Controller 1 Mailbox 18 Data 2 Register */
+#define                  CAN1_MB18_DATA3  0xffc0364c   /* CAN Controller 1 Mailbox 18 Data 3 Register */
+#define                 CAN1_MB18_LENGTH  0xffc03650   /* CAN Controller 1 Mailbox 18 Length Register */
+#define              CAN1_MB18_TIMESTAMP  0xffc03654   /* CAN Controller 1 Mailbox 18 Timestamp Register */
+#define                    CAN1_MB18_ID0  0xffc03658   /* CAN Controller 1 Mailbox 18 ID0 Register */
+#define                    CAN1_MB18_ID1  0xffc0365c   /* CAN Controller 1 Mailbox 18 ID1 Register */
+#define                  CAN1_MB19_DATA0  0xffc03660   /* CAN Controller 1 Mailbox 19 Data 0 Register */
+#define                  CAN1_MB19_DATA1  0xffc03664   /* CAN Controller 1 Mailbox 19 Data 1 Register */
+#define                  CAN1_MB19_DATA2  0xffc03668   /* CAN Controller 1 Mailbox 19 Data 2 Register */
+#define                  CAN1_MB19_DATA3  0xffc0366c   /* CAN Controller 1 Mailbox 19 Data 3 Register */
+#define                 CAN1_MB19_LENGTH  0xffc03670   /* CAN Controller 1 Mailbox 19 Length Register */
+#define              CAN1_MB19_TIMESTAMP  0xffc03674   /* CAN Controller 1 Mailbox 19 Timestamp Register */
+#define                    CAN1_MB19_ID0  0xffc03678   /* CAN Controller 1 Mailbox 19 ID0 Register */
+#define                    CAN1_MB19_ID1  0xffc0367c   /* CAN Controller 1 Mailbox 19 ID1 Register */
+#define                  CAN1_MB20_DATA0  0xffc03680   /* CAN Controller 1 Mailbox 20 Data 0 Register */
+#define                  CAN1_MB20_DATA1  0xffc03684   /* CAN Controller 1 Mailbox 20 Data 1 Register */
+#define                  CAN1_MB20_DATA2  0xffc03688   /* CAN Controller 1 Mailbox 20 Data 2 Register */
+#define                  CAN1_MB20_DATA3  0xffc0368c   /* CAN Controller 1 Mailbox 20 Data 3 Register */
+#define                 CAN1_MB20_LENGTH  0xffc03690   /* CAN Controller 1 Mailbox 20 Length Register */
+#define              CAN1_MB20_TIMESTAMP  0xffc03694   /* CAN Controller 1 Mailbox 20 Timestamp Register */
+#define                    CAN1_MB20_ID0  0xffc03698   /* CAN Controller 1 Mailbox 20 ID0 Register */
+#define                    CAN1_MB20_ID1  0xffc0369c   /* CAN Controller 1 Mailbox 20 ID1 Register */
+#define                  CAN1_MB21_DATA0  0xffc036a0   /* CAN Controller 1 Mailbox 21 Data 0 Register */
+#define                  CAN1_MB21_DATA1  0xffc036a4   /* CAN Controller 1 Mailbox 21 Data 1 Register */
+#define                  CAN1_MB21_DATA2  0xffc036a8   /* CAN Controller 1 Mailbox 21 Data 2 Register */
+#define                  CAN1_MB21_DATA3  0xffc036ac   /* CAN Controller 1 Mailbox 21 Data 3 Register */
+#define                 CAN1_MB21_LENGTH  0xffc036b0   /* CAN Controller 1 Mailbox 21 Length Register */
+#define              CAN1_MB21_TIMESTAMP  0xffc036b4   /* CAN Controller 1 Mailbox 21 Timestamp Register */
+#define                    CAN1_MB21_ID0  0xffc036b8   /* CAN Controller 1 Mailbox 21 ID0 Register */
+#define                    CAN1_MB21_ID1  0xffc036bc   /* CAN Controller 1 Mailbox 21 ID1 Register */
+#define                  CAN1_MB22_DATA0  0xffc036c0   /* CAN Controller 1 Mailbox 22 Data 0 Register */
+#define                  CAN1_MB22_DATA1  0xffc036c4   /* CAN Controller 1 Mailbox 22 Data 1 Register */
+#define                  CAN1_MB22_DATA2  0xffc036c8   /* CAN Controller 1 Mailbox 22 Data 2 Register */
+#define                  CAN1_MB22_DATA3  0xffc036cc   /* CAN Controller 1 Mailbox 22 Data 3 Register */
+#define                 CAN1_MB22_LENGTH  0xffc036d0   /* CAN Controller 1 Mailbox 22 Length Register */
+#define              CAN1_MB22_TIMESTAMP  0xffc036d4   /* CAN Controller 1 Mailbox 22 Timestamp Register */
+#define                    CAN1_MB22_ID0  0xffc036d8   /* CAN Controller 1 Mailbox 22 ID0 Register */
+#define                    CAN1_MB22_ID1  0xffc036dc   /* CAN Controller 1 Mailbox 22 ID1 Register */
+#define                  CAN1_MB23_DATA0  0xffc036e0   /* CAN Controller 1 Mailbox 23 Data 0 Register */
+#define                  CAN1_MB23_DATA1  0xffc036e4   /* CAN Controller 1 Mailbox 23 Data 1 Register */
+#define                  CAN1_MB23_DATA2  0xffc036e8   /* CAN Controller 1 Mailbox 23 Data 2 Register */
+#define                  CAN1_MB23_DATA3  0xffc036ec   /* CAN Controller 1 Mailbox 23 Data 3 Register */
+#define                 CAN1_MB23_LENGTH  0xffc036f0   /* CAN Controller 1 Mailbox 23 Length Register */
+#define              CAN1_MB23_TIMESTAMP  0xffc036f4   /* CAN Controller 1 Mailbox 23 Timestamp Register */
+#define                    CAN1_MB23_ID0  0xffc036f8   /* CAN Controller 1 Mailbox 23 ID0 Register */
+#define                    CAN1_MB23_ID1  0xffc036fc   /* CAN Controller 1 Mailbox 23 ID1 Register */
+#define                  CAN1_MB24_DATA0  0xffc03700   /* CAN Controller 1 Mailbox 24 Data 0 Register */
+#define                  CAN1_MB24_DATA1  0xffc03704   /* CAN Controller 1 Mailbox 24 Data 1 Register */
+#define                  CAN1_MB24_DATA2  0xffc03708   /* CAN Controller 1 Mailbox 24 Data 2 Register */
+#define                  CAN1_MB24_DATA3  0xffc0370c   /* CAN Controller 1 Mailbox 24 Data 3 Register */
+#define                 CAN1_MB24_LENGTH  0xffc03710   /* CAN Controller 1 Mailbox 24 Length Register */
+#define              CAN1_MB24_TIMESTAMP  0xffc03714   /* CAN Controller 1 Mailbox 24 Timestamp Register */
+#define                    CAN1_MB24_ID0  0xffc03718   /* CAN Controller 1 Mailbox 24 ID0 Register */
+#define                    CAN1_MB24_ID1  0xffc0371c   /* CAN Controller 1 Mailbox 24 ID1 Register */
+#define                  CAN1_MB25_DATA0  0xffc03720   /* CAN Controller 1 Mailbox 25 Data 0 Register */
+#define                  CAN1_MB25_DATA1  0xffc03724   /* CAN Controller 1 Mailbox 25 Data 1 Register */
+#define                  CAN1_MB25_DATA2  0xffc03728   /* CAN Controller 1 Mailbox 25 Data 2 Register */
+#define                  CAN1_MB25_DATA3  0xffc0372c   /* CAN Controller 1 Mailbox 25 Data 3 Register */
+#define                 CAN1_MB25_LENGTH  0xffc03730   /* CAN Controller 1 Mailbox 25 Length Register */
+#define              CAN1_MB25_TIMESTAMP  0xffc03734   /* CAN Controller 1 Mailbox 25 Timestamp Register */
+#define                    CAN1_MB25_ID0  0xffc03738   /* CAN Controller 1 Mailbox 25 ID0 Register */
+#define                    CAN1_MB25_ID1  0xffc0373c   /* CAN Controller 1 Mailbox 25 ID1 Register */
+#define                  CAN1_MB26_DATA0  0xffc03740   /* CAN Controller 1 Mailbox 26 Data 0 Register */
+#define                  CAN1_MB26_DATA1  0xffc03744   /* CAN Controller 1 Mailbox 26 Data 1 Register */
+#define                  CAN1_MB26_DATA2  0xffc03748   /* CAN Controller 1 Mailbox 26 Data 2 Register */
+#define                  CAN1_MB26_DATA3  0xffc0374c   /* CAN Controller 1 Mailbox 26 Data 3 Register */
+#define                 CAN1_MB26_LENGTH  0xffc03750   /* CAN Controller 1 Mailbox 26 Length Register */
+#define              CAN1_MB26_TIMESTAMP  0xffc03754   /* CAN Controller 1 Mailbox 26 Timestamp Register */
+#define                    CAN1_MB26_ID0  0xffc03758   /* CAN Controller 1 Mailbox 26 ID0 Register */
+#define                    CAN1_MB26_ID1  0xffc0375c   /* CAN Controller 1 Mailbox 26 ID1 Register */
+#define                  CAN1_MB27_DATA0  0xffc03760   /* CAN Controller 1 Mailbox 27 Data 0 Register */
+#define                  CAN1_MB27_DATA1  0xffc03764   /* CAN Controller 1 Mailbox 27 Data 1 Register */
+#define                  CAN1_MB27_DATA2  0xffc03768   /* CAN Controller 1 Mailbox 27 Data 2 Register */
+#define                  CAN1_MB27_DATA3  0xffc0376c   /* CAN Controller 1 Mailbox 27 Data 3 Register */
+#define                 CAN1_MB27_LENGTH  0xffc03770   /* CAN Controller 1 Mailbox 27 Length Register */
+#define              CAN1_MB27_TIMESTAMP  0xffc03774   /* CAN Controller 1 Mailbox 27 Timestamp Register */
+#define                    CAN1_MB27_ID0  0xffc03778   /* CAN Controller 1 Mailbox 27 ID0 Register */
+#define                    CAN1_MB27_ID1  0xffc0377c   /* CAN Controller 1 Mailbox 27 ID1 Register */
+#define                  CAN1_MB28_DATA0  0xffc03780   /* CAN Controller 1 Mailbox 28 Data 0 Register */
+#define                  CAN1_MB28_DATA1  0xffc03784   /* CAN Controller 1 Mailbox 28 Data 1 Register */
+#define                  CAN1_MB28_DATA2  0xffc03788   /* CAN Controller 1 Mailbox 28 Data 2 Register */
+#define                  CAN1_MB28_DATA3  0xffc0378c   /* CAN Controller 1 Mailbox 28 Data 3 Register */
+#define                 CAN1_MB28_LENGTH  0xffc03790   /* CAN Controller 1 Mailbox 28 Length Register */
+#define              CAN1_MB28_TIMESTAMP  0xffc03794   /* CAN Controller 1 Mailbox 28 Timestamp Register */
+#define                    CAN1_MB28_ID0  0xffc03798   /* CAN Controller 1 Mailbox 28 ID0 Register */
+#define                    CAN1_MB28_ID1  0xffc0379c   /* CAN Controller 1 Mailbox 28 ID1 Register */
+#define                  CAN1_MB29_DATA0  0xffc037a0   /* CAN Controller 1 Mailbox 29 Data 0 Register */
+#define                  CAN1_MB29_DATA1  0xffc037a4   /* CAN Controller 1 Mailbox 29 Data 1 Register */
+#define                  CAN1_MB29_DATA2  0xffc037a8   /* CAN Controller 1 Mailbox 29 Data 2 Register */
+#define                  CAN1_MB29_DATA3  0xffc037ac   /* CAN Controller 1 Mailbox 29 Data 3 Register */
+#define                 CAN1_MB29_LENGTH  0xffc037b0   /* CAN Controller 1 Mailbox 29 Length Register */
+#define              CAN1_MB29_TIMESTAMP  0xffc037b4   /* CAN Controller 1 Mailbox 29 Timestamp Register */
+#define                    CAN1_MB29_ID0  0xffc037b8   /* CAN Controller 1 Mailbox 29 ID0 Register */
+#define                    CAN1_MB29_ID1  0xffc037bc   /* CAN Controller 1 Mailbox 29 ID1 Register */
+#define                  CAN1_MB30_DATA0  0xffc037c0   /* CAN Controller 1 Mailbox 30 Data 0 Register */
+#define                  CAN1_MB30_DATA1  0xffc037c4   /* CAN Controller 1 Mailbox 30 Data 1 Register */
+#define                  CAN1_MB30_DATA2  0xffc037c8   /* CAN Controller 1 Mailbox 30 Data 2 Register */
+#define                  CAN1_MB30_DATA3  0xffc037cc   /* CAN Controller 1 Mailbox 30 Data 3 Register */
+#define                 CAN1_MB30_LENGTH  0xffc037d0   /* CAN Controller 1 Mailbox 30 Length Register */
+#define              CAN1_MB30_TIMESTAMP  0xffc037d4   /* CAN Controller 1 Mailbox 30 Timestamp Register */
+#define                    CAN1_MB30_ID0  0xffc037d8   /* CAN Controller 1 Mailbox 30 ID0 Register */
+#define                    CAN1_MB30_ID1  0xffc037dc   /* CAN Controller 1 Mailbox 30 ID1 Register */
+#define                  CAN1_MB31_DATA0  0xffc037e0   /* CAN Controller 1 Mailbox 31 Data 0 Register */
+#define                  CAN1_MB31_DATA1  0xffc037e4   /* CAN Controller 1 Mailbox 31 Data 1 Register */
+#define                  CAN1_MB31_DATA2  0xffc037e8   /* CAN Controller 1 Mailbox 31 Data 2 Register */
+#define                  CAN1_MB31_DATA3  0xffc037ec   /* CAN Controller 1 Mailbox 31 Data 3 Register */
+#define                 CAN1_MB31_LENGTH  0xffc037f0   /* CAN Controller 1 Mailbox 31 Length Register */
+#define              CAN1_MB31_TIMESTAMP  0xffc037f4   /* CAN Controller 1 Mailbox 31 Timestamp Register */
+#define                    CAN1_MB31_ID0  0xffc037f8   /* CAN Controller 1 Mailbox 31 ID0 Register */
+#define                    CAN1_MB31_ID1  0xffc037fc   /* CAN Controller 1 Mailbox 31 ID1 Register */
+
+#endif /* _DEF_BF548_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF549.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF549.h
new file mode 100644
index 0000000..ac569fc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF549.h
@@ -0,0 +1,186 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF549_H
+#define _DEF_BF549_H
+
+/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
+#include "defBF54x_base.h"
+
+/* The BF549 is like the BF544, but has MXVR */
+#include "defBF547.h"
+
+/* MXVR Registers */
+
+#define                      MXVR_CONFIG  0xffc02700   /* MXVR Configuration Register */
+#define                     MXVR_STATE_0  0xffc02708   /* MXVR State Register 0 */
+#define                     MXVR_STATE_1  0xffc0270c   /* MXVR State Register 1 */
+#define                  MXVR_INT_STAT_0  0xffc02710   /* MXVR Interrupt Status Register 0 */
+#define                  MXVR_INT_STAT_1  0xffc02714   /* MXVR Interrupt Status Register 1 */
+#define                    MXVR_INT_EN_0  0xffc02718   /* MXVR Interrupt Enable Register 0 */
+#define                    MXVR_INT_EN_1  0xffc0271c   /* MXVR Interrupt Enable Register 1 */
+#define                    MXVR_POSITION  0xffc02720   /* MXVR Node Position Register */
+#define                MXVR_MAX_POSITION  0xffc02724   /* MXVR Maximum Node Position Register */
+#define                       MXVR_DELAY  0xffc02728   /* MXVR Node Frame Delay Register */
+#define                   MXVR_MAX_DELAY  0xffc0272c   /* MXVR Maximum Node Frame Delay Register */
+#define                       MXVR_LADDR  0xffc02730   /* MXVR Logical Address Register */
+#define                       MXVR_GADDR  0xffc02734   /* MXVR Group Address Register */
+#define                       MXVR_AADDR  0xffc02738   /* MXVR Alternate Address Register */
+
+/* MXVR Allocation Table Registers */
+
+#define                     MXVR_ALLOC_0  0xffc0273c   /* MXVR Allocation Table Register 0 */
+#define                     MXVR_ALLOC_1  0xffc02740   /* MXVR Allocation Table Register 1 */
+#define                     MXVR_ALLOC_2  0xffc02744   /* MXVR Allocation Table Register 2 */
+#define                     MXVR_ALLOC_3  0xffc02748   /* MXVR Allocation Table Register 3 */
+#define                     MXVR_ALLOC_4  0xffc0274c   /* MXVR Allocation Table Register 4 */
+#define                     MXVR_ALLOC_5  0xffc02750   /* MXVR Allocation Table Register 5 */
+#define                     MXVR_ALLOC_6  0xffc02754   /* MXVR Allocation Table Register 6 */
+#define                     MXVR_ALLOC_7  0xffc02758   /* MXVR Allocation Table Register 7 */
+#define                     MXVR_ALLOC_8  0xffc0275c   /* MXVR Allocation Table Register 8 */
+#define                     MXVR_ALLOC_9  0xffc02760   /* MXVR Allocation Table Register 9 */
+#define                    MXVR_ALLOC_10  0xffc02764   /* MXVR Allocation Table Register 10 */
+#define                    MXVR_ALLOC_11  0xffc02768   /* MXVR Allocation Table Register 11 */
+#define                    MXVR_ALLOC_12  0xffc0276c   /* MXVR Allocation Table Register 12 */
+#define                    MXVR_ALLOC_13  0xffc02770   /* MXVR Allocation Table Register 13 */
+#define                    MXVR_ALLOC_14  0xffc02774   /* MXVR Allocation Table Register 14 */
+
+/* MXVR Channel Assign Registers */
+
+#define                MXVR_SYNC_LCHAN_0  0xffc02778   /* MXVR Sync Data Logical Channel Assign Register 0 */
+#define                MXVR_SYNC_LCHAN_1  0xffc0277c   /* MXVR Sync Data Logical Channel Assign Register 1 */
+#define                MXVR_SYNC_LCHAN_2  0xffc02780   /* MXVR Sync Data Logical Channel Assign Register 2 */
+#define                MXVR_SYNC_LCHAN_3  0xffc02784   /* MXVR Sync Data Logical Channel Assign Register 3 */
+#define                MXVR_SYNC_LCHAN_4  0xffc02788   /* MXVR Sync Data Logical Channel Assign Register 4 */
+#define                MXVR_SYNC_LCHAN_5  0xffc0278c   /* MXVR Sync Data Logical Channel Assign Register 5 */
+#define                MXVR_SYNC_LCHAN_6  0xffc02790   /* MXVR Sync Data Logical Channel Assign Register 6 */
+#define                MXVR_SYNC_LCHAN_7  0xffc02794   /* MXVR Sync Data Logical Channel Assign Register 7 */
+
+/* MXVR DMA0 Registers */
+
+#define                 MXVR_DMA0_CONFIG  0xffc02798   /* MXVR Sync Data DMA0 Config Register */
+#define             MXVR_DMA0_START_ADDR  0xffc0279c   /* MXVR Sync Data DMA0 Start Address */
+#define                  MXVR_DMA0_COUNT  0xffc027a0   /* MXVR Sync Data DMA0 Loop Count Register */
+#define              MXVR_DMA0_CURR_ADDR  0xffc027a4   /* MXVR Sync Data DMA0 Current Address */
+#define             MXVR_DMA0_CURR_COUNT  0xffc027a8   /* MXVR Sync Data DMA0 Current Loop Count */
+
+/* MXVR DMA1 Registers */
+
+#define                 MXVR_DMA1_CONFIG  0xffc027ac   /* MXVR Sync Data DMA1 Config Register */
+#define             MXVR_DMA1_START_ADDR  0xffc027b0   /* MXVR Sync Data DMA1 Start Address */
+#define                  MXVR_DMA1_COUNT  0xffc027b4   /* MXVR Sync Data DMA1 Loop Count Register */
+#define              MXVR_DMA1_CURR_ADDR  0xffc027b8   /* MXVR Sync Data DMA1 Current Address */
+#define             MXVR_DMA1_CURR_COUNT  0xffc027bc   /* MXVR Sync Data DMA1 Current Loop Count */
+
+/* MXVR DMA2 Registers */
+
+#define                 MXVR_DMA2_CONFIG  0xffc027c0   /* MXVR Sync Data DMA2 Config Register */
+#define             MXVR_DMA2_START_ADDR  0xffc027c4   /* MXVR Sync Data DMA2 Start Address */
+#define                  MXVR_DMA2_COUNT  0xffc027c8   /* MXVR Sync Data DMA2 Loop Count Register */
+#define              MXVR_DMA2_CURR_ADDR  0xffc027cc   /* MXVR Sync Data DMA2 Current Address */
+#define             MXVR_DMA2_CURR_COUNT  0xffc027d0   /* MXVR Sync Data DMA2 Current Loop Count */
+
+/* MXVR DMA3 Registers */
+
+#define                 MXVR_DMA3_CONFIG  0xffc027d4   /* MXVR Sync Data DMA3 Config Register */
+#define             MXVR_DMA3_START_ADDR  0xffc027d8   /* MXVR Sync Data DMA3 Start Address */
+#define                  MXVR_DMA3_COUNT  0xffc027dc   /* MXVR Sync Data DMA3 Loop Count Register */
+#define              MXVR_DMA3_CURR_ADDR  0xffc027e0   /* MXVR Sync Data DMA3 Current Address */
+#define             MXVR_DMA3_CURR_COUNT  0xffc027e4   /* MXVR Sync Data DMA3 Current Loop Count */
+
+/* MXVR DMA4 Registers */
+
+#define                 MXVR_DMA4_CONFIG  0xffc027e8   /* MXVR Sync Data DMA4 Config Register */
+#define             MXVR_DMA4_START_ADDR  0xffc027ec   /* MXVR Sync Data DMA4 Start Address */
+#define                  MXVR_DMA4_COUNT  0xffc027f0   /* MXVR Sync Data DMA4 Loop Count Register */
+#define              MXVR_DMA4_CURR_ADDR  0xffc027f4   /* MXVR Sync Data DMA4 Current Address */
+#define             MXVR_DMA4_CURR_COUNT  0xffc027f8   /* MXVR Sync Data DMA4 Current Loop Count */
+
+/* MXVR DMA5 Registers */
+
+#define                 MXVR_DMA5_CONFIG  0xffc027fc   /* MXVR Sync Data DMA5 Config Register */
+#define             MXVR_DMA5_START_ADDR  0xffc02800   /* MXVR Sync Data DMA5 Start Address */
+#define                  MXVR_DMA5_COUNT  0xffc02804   /* MXVR Sync Data DMA5 Loop Count Register */
+#define              MXVR_DMA5_CURR_ADDR  0xffc02808   /* MXVR Sync Data DMA5 Current Address */
+#define             MXVR_DMA5_CURR_COUNT  0xffc0280c   /* MXVR Sync Data DMA5 Current Loop Count */
+
+/* MXVR DMA6 Registers */
+
+#define                 MXVR_DMA6_CONFIG  0xffc02810   /* MXVR Sync Data DMA6 Config Register */
+#define             MXVR_DMA6_START_ADDR  0xffc02814   /* MXVR Sync Data DMA6 Start Address */
+#define                  MXVR_DMA6_COUNT  0xffc02818   /* MXVR Sync Data DMA6 Loop Count Register */
+#define              MXVR_DMA6_CURR_ADDR  0xffc0281c   /* MXVR Sync Data DMA6 Current Address */
+#define             MXVR_DMA6_CURR_COUNT  0xffc02820   /* MXVR Sync Data DMA6 Current Loop Count */
+
+/* MXVR DMA7 Registers */
+
+#define                 MXVR_DMA7_CONFIG  0xffc02824   /* MXVR Sync Data DMA7 Config Register */
+#define             MXVR_DMA7_START_ADDR  0xffc02828   /* MXVR Sync Data DMA7 Start Address */
+#define                  MXVR_DMA7_COUNT  0xffc0282c   /* MXVR Sync Data DMA7 Loop Count Register */
+#define              MXVR_DMA7_CURR_ADDR  0xffc02830   /* MXVR Sync Data DMA7 Current Address */
+#define             MXVR_DMA7_CURR_COUNT  0xffc02834   /* MXVR Sync Data DMA7 Current Loop Count */
+
+/* MXVR Asynch Packet Registers */
+
+#define                      MXVR_AP_CTL  0xffc02838   /* MXVR Async Packet Control Register */
+#define             MXVR_APRB_START_ADDR  0xffc0283c   /* MXVR Async Packet RX Buffer Start Addr Register */
+#define              MXVR_APRB_CURR_ADDR  0xffc02840   /* MXVR Async Packet RX Buffer Current Addr Register */
+#define             MXVR_APTB_START_ADDR  0xffc02844   /* MXVR Async Packet TX Buffer Start Addr Register */
+#define              MXVR_APTB_CURR_ADDR  0xffc02848   /* MXVR Async Packet TX Buffer Current Addr Register */
+
+/* MXVR Control Message Registers */
+
+#define                      MXVR_CM_CTL  0xffc0284c   /* MXVR Control Message Control Register */
+#define             MXVR_CMRB_START_ADDR  0xffc02850   /* MXVR Control Message RX Buffer Start Addr Register */
+#define              MXVR_CMRB_CURR_ADDR  0xffc02854   /* MXVR Control Message RX Buffer Current Address */
+#define             MXVR_CMTB_START_ADDR  0xffc02858   /* MXVR Control Message TX Buffer Start Addr Register */
+#define              MXVR_CMTB_CURR_ADDR  0xffc0285c   /* MXVR Control Message TX Buffer Current Address */
+
+/* MXVR Remote Read Registers */
+
+#define             MXVR_RRDB_START_ADDR  0xffc02860   /* MXVR Remote Read Buffer Start Addr Register */
+#define              MXVR_RRDB_CURR_ADDR  0xffc02864   /* MXVR Remote Read Buffer Current Addr Register */
+
+/* MXVR Pattern Data Registers */
+
+#define                  MXVR_PAT_DATA_0  0xffc02868   /* MXVR Pattern Data Register 0 */
+#define                    MXVR_PAT_EN_0  0xffc0286c   /* MXVR Pattern Enable Register 0 */
+#define                  MXVR_PAT_DATA_1  0xffc02870   /* MXVR Pattern Data Register 1 */
+#define                    MXVR_PAT_EN_1  0xffc02874   /* MXVR Pattern Enable Register 1 */
+
+/* MXVR Frame Counter Registers */
+
+#define                 MXVR_FRAME_CNT_0  0xffc02878   /* MXVR Frame Counter 0 */
+#define                 MXVR_FRAME_CNT_1  0xffc0287c   /* MXVR Frame Counter 1 */
+
+/* MXVR Routing Table Registers */
+
+#define                   MXVR_ROUTING_0  0xffc02880   /* MXVR Routing Table Register 0 */
+#define                   MXVR_ROUTING_1  0xffc02884   /* MXVR Routing Table Register 1 */
+#define                   MXVR_ROUTING_2  0xffc02888   /* MXVR Routing Table Register 2 */
+#define                   MXVR_ROUTING_3  0xffc0288c   /* MXVR Routing Table Register 3 */
+#define                   MXVR_ROUTING_4  0xffc02890   /* MXVR Routing Table Register 4 */
+#define                   MXVR_ROUTING_5  0xffc02894   /* MXVR Routing Table Register 5 */
+#define                   MXVR_ROUTING_6  0xffc02898   /* MXVR Routing Table Register 6 */
+#define                   MXVR_ROUTING_7  0xffc0289c   /* MXVR Routing Table Register 7 */
+#define                   MXVR_ROUTING_8  0xffc028a0   /* MXVR Routing Table Register 8 */
+#define                   MXVR_ROUTING_9  0xffc028a4   /* MXVR Routing Table Register 9 */
+#define                  MXVR_ROUTING_10  0xffc028a8   /* MXVR Routing Table Register 10 */
+#define                  MXVR_ROUTING_11  0xffc028ac   /* MXVR Routing Table Register 11 */
+#define                  MXVR_ROUTING_12  0xffc028b0   /* MXVR Routing Table Register 12 */
+#define                  MXVR_ROUTING_13  0xffc028b4   /* MXVR Routing Table Register 13 */
+#define                  MXVR_ROUTING_14  0xffc028b8   /* MXVR Routing Table Register 14 */
+
+/* MXVR Counter-Clock-Control Registers */
+
+#define                   MXVR_BLOCK_CNT  0xffc028c0   /* MXVR Block Counter */
+#define                     MXVR_CLK_CTL  0xffc028d0   /* MXVR Clock Control Register */
+#define                  MXVR_CDRPLL_CTL  0xffc028d4   /* MXVR Clock/Data Recovery PLL Control Register */
+#define                   MXVR_FMPLL_CTL  0xffc028d8   /* MXVR Frequency Multiply PLL Control Register */
+#define                     MXVR_PIN_CTL  0xffc028dc   /* MXVR Pin Control Register */
+#define                    MXVR_SCLK_CNT  0xffc028e0   /* MXVR System Clock Counter Register */
+
+#endif /* _DEF_BF549_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
new file mode 100644
index 0000000..8f6e192
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
@@ -0,0 +1,2294 @@
+/*
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF54X_H
+#define _DEF_BF54X_H
+
+
+/* ************************************************************** */
+/*   SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF54x    */
+/* ************************************************************** */
+
+/* PLL Registers */
+
+#define                          PLL_CTL  0xffc00000   /* PLL Control Register */
+#define                          PLL_DIV  0xffc00004   /* PLL Divisor Register */
+#define                           VR_CTL  0xffc00008   /* Voltage Regulator Control Register */
+#define                         PLL_STAT  0xffc0000c   /* PLL Status Register */
+#define                      PLL_LOCKCNT  0xffc00010   /* PLL Lock Count Register */
+
+/* Debug/MP/Emulation Registers (0xFFC00014 - 0xFFC00014) */
+
+#define                           CHIPID  0xffc00014
+/* CHIPID Masks */
+#define                   CHIPID_VERSION  0xF0000000
+#define                    CHIPID_FAMILY  0x0FFFF000
+#define               CHIPID_MANUFACTURE  0x00000FFE
+
+/* System Reset and Interrupt Controller (0xFFC00100 - 0xFFC00104) */
+
+#define                            SWRST  0xffc00100   /* Software Reset Register */
+#define                            SYSCR  0xffc00104   /* System Configuration register */
+
+/* SIC Registers */
+
+#define                        SIC_RVECT  0xffc00108
+#define                       SIC_IMASK0  0xffc0010c   /* System Interrupt Mask Register 0 */
+#define                       SIC_IMASK1  0xffc00110   /* System Interrupt Mask Register 1 */
+#define                       SIC_IMASK2  0xffc00114   /* System Interrupt Mask Register 2 */
+#define                         SIC_ISR0  0xffc00118   /* System Interrupt Status Register 0 */
+#define                         SIC_ISR1  0xffc0011c   /* System Interrupt Status Register 1 */
+#define                         SIC_ISR2  0xffc00120   /* System Interrupt Status Register 2 */
+#define                         SIC_IWR0  0xffc00124   /* System Interrupt Wakeup Register 0 */
+#define                         SIC_IWR1  0xffc00128   /* System Interrupt Wakeup Register 1 */
+#define                         SIC_IWR2  0xffc0012c   /* System Interrupt Wakeup Register 2 */
+#define                         SIC_IAR0  0xffc00130   /* System Interrupt Assignment Register 0 */
+#define                         SIC_IAR1  0xffc00134   /* System Interrupt Assignment Register 1 */
+#define                         SIC_IAR2  0xffc00138   /* System Interrupt Assignment Register 2 */
+#define                         SIC_IAR3  0xffc0013c   /* System Interrupt Assignment Register 3 */
+#define                         SIC_IAR4  0xffc00140   /* System Interrupt Assignment Register 4 */
+#define                         SIC_IAR5  0xffc00144   /* System Interrupt Assignment Register 5 */
+#define                         SIC_IAR6  0xffc00148   /* System Interrupt Assignment Register 6 */
+#define                         SIC_IAR7  0xffc0014c   /* System Interrupt Assignment Register 7 */
+#define                         SIC_IAR8  0xffc00150   /* System Interrupt Assignment Register 8 */
+#define                         SIC_IAR9  0xffc00154   /* System Interrupt Assignment Register 9 */
+#define                        SIC_IAR10  0xffc00158   /* System Interrupt Assignment Register 10 */
+#define                        SIC_IAR11  0xffc0015c   /* System Interrupt Assignment Register 11 */
+
+/* Watchdog Timer Registers */
+
+#define                         WDOG_CTL  0xffc00200   /* Watchdog Control Register */
+#define                         WDOG_CNT  0xffc00204   /* Watchdog Count Register */
+#define                        WDOG_STAT  0xffc00208   /* Watchdog Status Register */
+
+/* RTC Registers */
+
+#define                         RTC_STAT  0xffc00300   /* RTC Status Register */
+#define                         RTC_ICTL  0xffc00304   /* RTC Interrupt Control Register */
+#define                        RTC_ISTAT  0xffc00308   /* RTC Interrupt Status Register */
+#define                        RTC_SWCNT  0xffc0030c   /* RTC Stopwatch Count Register */
+#define                        RTC_ALARM  0xffc00310   /* RTC Alarm Register */
+#define                         RTC_PREN  0xffc00314   /* RTC Prescaler Enable Register */
+
+/* UART0 Registers */
+
+#define                        UART0_DLL  0xffc00400   /* Divisor Latch Low Byte */
+#define                        UART0_DLH  0xffc00404   /* Divisor Latch High Byte */
+#define                       UART0_GCTL  0xffc00408   /* Global Control Register */
+#define                        UART0_LCR  0xffc0040c   /* Line Control Register */
+#define                        UART0_MCR  0xffc00410   /* Modem Control Register */
+#define                        UART0_LSR  0xffc00414   /* Line Status Register */
+#define                        UART0_MSR  0xffc00418   /* Modem Status Register */
+#define                        UART0_SCR  0xffc0041c   /* Scratch Register */
+#define                    UART0_IER_SET  0xffc00420   /* Interrupt Enable Register Set */
+#define                  UART0_IER_CLEAR  0xffc00424   /* Interrupt Enable Register Clear */
+#define                        UART0_THR  0xffc00428   /* Transmit Hold Register */
+#define                        UART0_RBR  0xffc0042c   /* Receive Buffer Register */
+
+/* SPI0 Registers */
+
+#define                     SPI0_REGBASE  0xffc00500
+#define                         SPI0_CTL  0xffc00500   /* SPI0 Control Register */
+#define                         SPI0_FLG  0xffc00504   /* SPI0 Flag Register */
+#define                        SPI0_STAT  0xffc00508   /* SPI0 Status Register */
+#define                        SPI0_TDBR  0xffc0050c   /* SPI0 Transmit Data Buffer Register */
+#define                        SPI0_RDBR  0xffc00510   /* SPI0 Receive Data Buffer Register */
+#define                        SPI0_BAUD  0xffc00514   /* SPI0 Baud Rate Register */
+#define                      SPI0_SHADOW  0xffc00518   /* SPI0 Receive Data Buffer Shadow Register */
+
+/* Timer Group of 3 registers are not defined in the shared file because they are not available on the ADSP-BF542 processor */
+
+/* Two Wire Interface Registers (TWI0) */
+
+#define                     TWI0_REGBASE  0xffc00700
+#define                      TWI0_CLKDIV  0xffc00700   /* Clock Divider Register */
+#define                     TWI0_CONTROL  0xffc00704   /* TWI Control Register */
+#define                   TWI0_SLAVE_CTL  0xffc00708   /* TWI Slave Mode Control Register */
+#define                  TWI0_SLAVE_STAT  0xffc0070c   /* TWI Slave Mode Status Register */
+#define                  TWI0_SLAVE_ADDR  0xffc00710   /* TWI Slave Mode Address Register */
+#define                  TWI0_MASTER_CTL  0xffc00714   /* TWI Master Mode Control Register */
+#define                 TWI0_MASTER_STAT  0xffc00718   /* TWI Master Mode Status Register */
+#define                 TWI0_MASTER_ADDR  0xffc0071c   /* TWI Master Mode Address Register */
+#define                    TWI0_INT_STAT  0xffc00720   /* TWI Interrupt Status Register */
+#define                    TWI0_INT_MASK  0xffc00724   /* TWI Interrupt Mask Register */
+#define                    TWI0_FIFO_CTL  0xffc00728   /* TWI FIFO Control Register */
+#define                   TWI0_FIFO_STAT  0xffc0072c   /* TWI FIFO Status Register */
+#define                   TWI0_XMT_DATA8  0xffc00780   /* TWI FIFO Transmit Data Single Byte Register */
+#define                  TWI0_XMT_DATA16  0xffc00784   /* TWI FIFO Transmit Data Double Byte Register */
+#define                   TWI0_RCV_DATA8  0xffc00788   /* TWI FIFO Receive Data Single Byte Register */
+#define                  TWI0_RCV_DATA16  0xffc0078c   /* TWI FIFO Receive Data Double Byte Register */
+
+/* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 processors */
+
+/* SPORT1 Registers */
+
+#define                      SPORT1_TCR1  0xffc00900   /* SPORT1 Transmit Configuration 1 Register */
+#define                      SPORT1_TCR2  0xffc00904   /* SPORT1 Transmit Configuration 2 Register */
+#define                   SPORT1_TCLKDIV  0xffc00908   /* SPORT1 Transmit Serial Clock Divider Register */
+#define                    SPORT1_TFSDIV  0xffc0090c   /* SPORT1 Transmit Frame Sync Divider Register */
+#define                        SPORT1_TX  0xffc00910   /* SPORT1 Transmit Data Register */
+#define                        SPORT1_RX  0xffc00918   /* SPORT1 Receive Data Register */
+#define                      SPORT1_RCR1  0xffc00920   /* SPORT1 Receive Configuration 1 Register */
+#define                      SPORT1_RCR2  0xffc00924   /* SPORT1 Receive Configuration 2 Register */
+#define                   SPORT1_RCLKDIV  0xffc00928   /* SPORT1 Receive Serial Clock Divider Register */
+#define                    SPORT1_RFSDIV  0xffc0092c   /* SPORT1 Receive Frame Sync Divider Register */
+#define                      SPORT1_STAT  0xffc00930   /* SPORT1 Status Register */
+#define                      SPORT1_CHNL  0xffc00934   /* SPORT1 Current Channel Register */
+#define                     SPORT1_MCMC1  0xffc00938   /* SPORT1 Multi channel Configuration Register 1 */
+#define                     SPORT1_MCMC2  0xffc0093c   /* SPORT1 Multi channel Configuration Register 2 */
+#define                     SPORT1_MTCS0  0xffc00940   /* SPORT1 Multi channel Transmit Select Register 0 */
+#define                     SPORT1_MTCS1  0xffc00944   /* SPORT1 Multi channel Transmit Select Register 1 */
+#define                     SPORT1_MTCS2  0xffc00948   /* SPORT1 Multi channel Transmit Select Register 2 */
+#define                     SPORT1_MTCS3  0xffc0094c   /* SPORT1 Multi channel Transmit Select Register 3 */
+#define                     SPORT1_MRCS0  0xffc00950   /* SPORT1 Multi channel Receive Select Register 0 */
+#define                     SPORT1_MRCS1  0xffc00954   /* SPORT1 Multi channel Receive Select Register 1 */
+#define                     SPORT1_MRCS2  0xffc00958   /* SPORT1 Multi channel Receive Select Register 2 */
+#define                     SPORT1_MRCS3  0xffc0095c   /* SPORT1 Multi channel Receive Select Register 3 */
+
+/* Asynchronous Memory Control Registers */
+
+#define                      EBIU_AMGCTL  0xffc00a00   /* Asynchronous Memory Global Control Register */
+#define                    EBIU_AMBCTL0   0xffc00a04   /* Asynchronous Memory Bank Control Register */
+#define                    EBIU_AMBCTL1   0xffc00a08   /* Asynchronous Memory Bank Control Register */
+#define                      EBIU_MBSCTL  0xffc00a0c   /* Asynchronous Memory Bank Select Control Register */
+#define                     EBIU_ARBSTAT  0xffc00a10   /* Asynchronous Memory Arbiter Status Register */
+#define                        EBIU_MODE  0xffc00a14   /* Asynchronous Mode Control Register */
+#define                        EBIU_FCTL  0xffc00a18   /* Asynchronous Memory Flash Control Register */
+
+/* DDR Memory Control Registers */
+
+#define                     EBIU_DDRCTL0  0xffc00a20   /* DDR Memory Control 0 Register */
+#define                     EBIU_DDRCTL1  0xffc00a24   /* DDR Memory Control 1 Register */
+#define                     EBIU_DDRCTL2  0xffc00a28   /* DDR Memory Control 2 Register */
+#define                     EBIU_DDRCTL3  0xffc00a2c   /* DDR Memory Control 3 Register */
+#define                      EBIU_DDRQUE  0xffc00a30   /* DDR Queue Configuration Register */
+#define                      EBIU_ERRADD  0xffc00a34   /* DDR Error Address Register */
+#define                      EBIU_ERRMST  0xffc00a38   /* DDR Error Master Register */
+#define                      EBIU_RSTCTL  0xffc00a3c   /* DDR Reset Control Register */
+
+/* DDR BankRead and Write Count Registers */
+
+#define                     EBIU_DDRBRC0  0xffc00a60   /* DDR Bank0 Read Count Register */
+#define                     EBIU_DDRBRC1  0xffc00a64   /* DDR Bank1 Read Count Register */
+#define                     EBIU_DDRBRC2  0xffc00a68   /* DDR Bank2 Read Count Register */
+#define                     EBIU_DDRBRC3  0xffc00a6c   /* DDR Bank3 Read Count Register */
+#define                     EBIU_DDRBRC4  0xffc00a70   /* DDR Bank4 Read Count Register */
+#define                     EBIU_DDRBRC5  0xffc00a74   /* DDR Bank5 Read Count Register */
+#define                     EBIU_DDRBRC6  0xffc00a78   /* DDR Bank6 Read Count Register */
+#define                     EBIU_DDRBRC7  0xffc00a7c   /* DDR Bank7 Read Count Register */
+#define                     EBIU_DDRBWC0  0xffc00a80   /* DDR Bank0 Write Count Register */
+#define                     EBIU_DDRBWC1  0xffc00a84   /* DDR Bank1 Write Count Register */
+#define                     EBIU_DDRBWC2  0xffc00a88   /* DDR Bank2 Write Count Register */
+#define                     EBIU_DDRBWC3  0xffc00a8c   /* DDR Bank3 Write Count Register */
+#define                     EBIU_DDRBWC4  0xffc00a90   /* DDR Bank4 Write Count Register */
+#define                     EBIU_DDRBWC5  0xffc00a94   /* DDR Bank5 Write Count Register */
+#define                     EBIU_DDRBWC6  0xffc00a98   /* DDR Bank6 Write Count Register */
+#define                     EBIU_DDRBWC7  0xffc00a9c   /* DDR Bank7 Write Count Register */
+#define                     EBIU_DDRACCT  0xffc00aa0   /* DDR Activation Count Register */
+#define                     EBIU_DDRTACT  0xffc00aa8   /* DDR Turn Around Count Register */
+#define                     EBIU_DDRARCT  0xffc00aac   /* DDR Auto-refresh Count Register */
+#define                      EBIU_DDRGC0  0xffc00ab0   /* DDR Grant Count 0 Register */
+#define                      EBIU_DDRGC1  0xffc00ab4   /* DDR Grant Count 1 Register */
+#define                      EBIU_DDRGC2  0xffc00ab8   /* DDR Grant Count 2 Register */
+#define                      EBIU_DDRGC3  0xffc00abc   /* DDR Grant Count 3 Register */
+#define                     EBIU_DDRMCEN  0xffc00ac0   /* DDR Metrics Counter Enable Register */
+#define                     EBIU_DDRMCCL  0xffc00ac4   /* DDR Metrics Counter Clear Register */
+
+/* DMAC0 Registers */
+
+#define                     DMAC0_TC_PER  0xffc00b0c   /* DMA Controller 0 Traffic Control Periods Register */
+#define                     DMAC0_TC_CNT  0xffc00b10   /* DMA Controller 0 Current Counts Register */
+
+/* DMA Channel 0 Registers */
+
+#define               DMA0_NEXT_DESC_PTR  0xffc00c00   /* DMA Channel 0 Next Descriptor Pointer Register */
+#define                  DMA0_START_ADDR  0xffc00c04   /* DMA Channel 0 Start Address Register */
+#define                      DMA0_CONFIG  0xffc00c08   /* DMA Channel 0 Configuration Register */
+#define                     DMA0_X_COUNT  0xffc00c10   /* DMA Channel 0 X Count Register */
+#define                    DMA0_X_MODIFY  0xffc00c14   /* DMA Channel 0 X Modify Register */
+#define                     DMA0_Y_COUNT  0xffc00c18   /* DMA Channel 0 Y Count Register */
+#define                    DMA0_Y_MODIFY  0xffc00c1c   /* DMA Channel 0 Y Modify Register */
+#define               DMA0_CURR_DESC_PTR  0xffc00c20   /* DMA Channel 0 Current Descriptor Pointer Register */
+#define                   DMA0_CURR_ADDR  0xffc00c24   /* DMA Channel 0 Current Address Register */
+#define                  DMA0_IRQ_STATUS  0xffc00c28   /* DMA Channel 0 Interrupt/Status Register */
+#define              DMA0_PERIPHERAL_MAP  0xffc00c2c   /* DMA Channel 0 Peripheral Map Register */
+#define                DMA0_CURR_X_COUNT  0xffc00c30   /* DMA Channel 0 Current X Count Register */
+#define                DMA0_CURR_Y_COUNT  0xffc00c38   /* DMA Channel 0 Current Y Count Register */
+
+/* DMA Channel 1 Registers */
+
+#define               DMA1_NEXT_DESC_PTR  0xffc00c40   /* DMA Channel 1 Next Descriptor Pointer Register */
+#define                  DMA1_START_ADDR  0xffc00c44   /* DMA Channel 1 Start Address Register */
+#define                      DMA1_CONFIG  0xffc00c48   /* DMA Channel 1 Configuration Register */
+#define                     DMA1_X_COUNT  0xffc00c50   /* DMA Channel 1 X Count Register */
+#define                    DMA1_X_MODIFY  0xffc00c54   /* DMA Channel 1 X Modify Register */
+#define                     DMA1_Y_COUNT  0xffc00c58   /* DMA Channel 1 Y Count Register */
+#define                    DMA1_Y_MODIFY  0xffc00c5c   /* DMA Channel 1 Y Modify Register */
+#define               DMA1_CURR_DESC_PTR  0xffc00c60   /* DMA Channel 1 Current Descriptor Pointer Register */
+#define                   DMA1_CURR_ADDR  0xffc00c64   /* DMA Channel 1 Current Address Register */
+#define                  DMA1_IRQ_STATUS  0xffc00c68   /* DMA Channel 1 Interrupt/Status Register */
+#define              DMA1_PERIPHERAL_MAP  0xffc00c6c   /* DMA Channel 1 Peripheral Map Register */
+#define                DMA1_CURR_X_COUNT  0xffc00c70   /* DMA Channel 1 Current X Count Register */
+#define                DMA1_CURR_Y_COUNT  0xffc00c78   /* DMA Channel 1 Current Y Count Register */
+
+/* DMA Channel 2 Registers */
+
+#define               DMA2_NEXT_DESC_PTR  0xffc00c80   /* DMA Channel 2 Next Descriptor Pointer Register */
+#define                  DMA2_START_ADDR  0xffc00c84   /* DMA Channel 2 Start Address Register */
+#define                      DMA2_CONFIG  0xffc00c88   /* DMA Channel 2 Configuration Register */
+#define                     DMA2_X_COUNT  0xffc00c90   /* DMA Channel 2 X Count Register */
+#define                    DMA2_X_MODIFY  0xffc00c94   /* DMA Channel 2 X Modify Register */
+#define                     DMA2_Y_COUNT  0xffc00c98   /* DMA Channel 2 Y Count Register */
+#define                    DMA2_Y_MODIFY  0xffc00c9c   /* DMA Channel 2 Y Modify Register */
+#define               DMA2_CURR_DESC_PTR  0xffc00ca0   /* DMA Channel 2 Current Descriptor Pointer Register */
+#define                   DMA2_CURR_ADDR  0xffc00ca4   /* DMA Channel 2 Current Address Register */
+#define                  DMA2_IRQ_STATUS  0xffc00ca8   /* DMA Channel 2 Interrupt/Status Register */
+#define              DMA2_PERIPHERAL_MAP  0xffc00cac   /* DMA Channel 2 Peripheral Map Register */
+#define                DMA2_CURR_X_COUNT  0xffc00cb0   /* DMA Channel 2 Current X Count Register */
+#define                DMA2_CURR_Y_COUNT  0xffc00cb8   /* DMA Channel 2 Current Y Count Register */
+
+/* DMA Channel 3 Registers */
+
+#define               DMA3_NEXT_DESC_PTR  0xffc00cc0   /* DMA Channel 3 Next Descriptor Pointer Register */
+#define                  DMA3_START_ADDR  0xffc00cc4   /* DMA Channel 3 Start Address Register */
+#define                      DMA3_CONFIG  0xffc00cc8   /* DMA Channel 3 Configuration Register */
+#define                     DMA3_X_COUNT  0xffc00cd0   /* DMA Channel 3 X Count Register */
+#define                    DMA3_X_MODIFY  0xffc00cd4   /* DMA Channel 3 X Modify Register */
+#define                     DMA3_Y_COUNT  0xffc00cd8   /* DMA Channel 3 Y Count Register */
+#define                    DMA3_Y_MODIFY  0xffc00cdc   /* DMA Channel 3 Y Modify Register */
+#define               DMA3_CURR_DESC_PTR  0xffc00ce0   /* DMA Channel 3 Current Descriptor Pointer Register */
+#define                   DMA3_CURR_ADDR  0xffc00ce4   /* DMA Channel 3 Current Address Register */
+#define                  DMA3_IRQ_STATUS  0xffc00ce8   /* DMA Channel 3 Interrupt/Status Register */
+#define              DMA3_PERIPHERAL_MAP  0xffc00cec   /* DMA Channel 3 Peripheral Map Register */
+#define                DMA3_CURR_X_COUNT  0xffc00cf0   /* DMA Channel 3 Current X Count Register */
+#define                DMA3_CURR_Y_COUNT  0xffc00cf8   /* DMA Channel 3 Current Y Count Register */
+
+/* DMA Channel 4 Registers */
+
+#define               DMA4_NEXT_DESC_PTR  0xffc00d00   /* DMA Channel 4 Next Descriptor Pointer Register */
+#define                  DMA4_START_ADDR  0xffc00d04   /* DMA Channel 4 Start Address Register */
+#define                      DMA4_CONFIG  0xffc00d08   /* DMA Channel 4 Configuration Register */
+#define                     DMA4_X_COUNT  0xffc00d10   /* DMA Channel 4 X Count Register */
+#define                    DMA4_X_MODIFY  0xffc00d14   /* DMA Channel 4 X Modify Register */
+#define                     DMA4_Y_COUNT  0xffc00d18   /* DMA Channel 4 Y Count Register */
+#define                    DMA4_Y_MODIFY  0xffc00d1c   /* DMA Channel 4 Y Modify Register */
+#define               DMA4_CURR_DESC_PTR  0xffc00d20   /* DMA Channel 4 Current Descriptor Pointer Register */
+#define                   DMA4_CURR_ADDR  0xffc00d24   /* DMA Channel 4 Current Address Register */
+#define                  DMA4_IRQ_STATUS  0xffc00d28   /* DMA Channel 4 Interrupt/Status Register */
+#define              DMA4_PERIPHERAL_MAP  0xffc00d2c   /* DMA Channel 4 Peripheral Map Register */
+#define                DMA4_CURR_X_COUNT  0xffc00d30   /* DMA Channel 4 Current X Count Register */
+#define                DMA4_CURR_Y_COUNT  0xffc00d38   /* DMA Channel 4 Current Y Count Register */
+
+/* DMA Channel 5 Registers */
+
+#define               DMA5_NEXT_DESC_PTR  0xffc00d40   /* DMA Channel 5 Next Descriptor Pointer Register */
+#define                  DMA5_START_ADDR  0xffc00d44   /* DMA Channel 5 Start Address Register */
+#define                      DMA5_CONFIG  0xffc00d48   /* DMA Channel 5 Configuration Register */
+#define                     DMA5_X_COUNT  0xffc00d50   /* DMA Channel 5 X Count Register */
+#define                    DMA5_X_MODIFY  0xffc00d54   /* DMA Channel 5 X Modify Register */
+#define                     DMA5_Y_COUNT  0xffc00d58   /* DMA Channel 5 Y Count Register */
+#define                    DMA5_Y_MODIFY  0xffc00d5c   /* DMA Channel 5 Y Modify Register */
+#define               DMA5_CURR_DESC_PTR  0xffc00d60   /* DMA Channel 5 Current Descriptor Pointer Register */
+#define                   DMA5_CURR_ADDR  0xffc00d64   /* DMA Channel 5 Current Address Register */
+#define                  DMA5_IRQ_STATUS  0xffc00d68   /* DMA Channel 5 Interrupt/Status Register */
+#define              DMA5_PERIPHERAL_MAP  0xffc00d6c   /* DMA Channel 5 Peripheral Map Register */
+#define                DMA5_CURR_X_COUNT  0xffc00d70   /* DMA Channel 5 Current X Count Register */
+#define                DMA5_CURR_Y_COUNT  0xffc00d78   /* DMA Channel 5 Current Y Count Register */
+
+/* DMA Channel 6 Registers */
+
+#define               DMA6_NEXT_DESC_PTR  0xffc00d80   /* DMA Channel 6 Next Descriptor Pointer Register */
+#define                  DMA6_START_ADDR  0xffc00d84   /* DMA Channel 6 Start Address Register */
+#define                      DMA6_CONFIG  0xffc00d88   /* DMA Channel 6 Configuration Register */
+#define                     DMA6_X_COUNT  0xffc00d90   /* DMA Channel 6 X Count Register */
+#define                    DMA6_X_MODIFY  0xffc00d94   /* DMA Channel 6 X Modify Register */
+#define                     DMA6_Y_COUNT  0xffc00d98   /* DMA Channel 6 Y Count Register */
+#define                    DMA6_Y_MODIFY  0xffc00d9c   /* DMA Channel 6 Y Modify Register */
+#define               DMA6_CURR_DESC_PTR  0xffc00da0   /* DMA Channel 6 Current Descriptor Pointer Register */
+#define                   DMA6_CURR_ADDR  0xffc00da4   /* DMA Channel 6 Current Address Register */
+#define                  DMA6_IRQ_STATUS  0xffc00da8   /* DMA Channel 6 Interrupt/Status Register */
+#define              DMA6_PERIPHERAL_MAP  0xffc00dac   /* DMA Channel 6 Peripheral Map Register */
+#define                DMA6_CURR_X_COUNT  0xffc00db0   /* DMA Channel 6 Current X Count Register */
+#define                DMA6_CURR_Y_COUNT  0xffc00db8   /* DMA Channel 6 Current Y Count Register */
+
+/* DMA Channel 7 Registers */
+
+#define               DMA7_NEXT_DESC_PTR  0xffc00dc0   /* DMA Channel 7 Next Descriptor Pointer Register */
+#define                  DMA7_START_ADDR  0xffc00dc4   /* DMA Channel 7 Start Address Register */
+#define                      DMA7_CONFIG  0xffc00dc8   /* DMA Channel 7 Configuration Register */
+#define                     DMA7_X_COUNT  0xffc00dd0   /* DMA Channel 7 X Count Register */
+#define                    DMA7_X_MODIFY  0xffc00dd4   /* DMA Channel 7 X Modify Register */
+#define                     DMA7_Y_COUNT  0xffc00dd8   /* DMA Channel 7 Y Count Register */
+#define                    DMA7_Y_MODIFY  0xffc00ddc   /* DMA Channel 7 Y Modify Register */
+#define               DMA7_CURR_DESC_PTR  0xffc00de0   /* DMA Channel 7 Current Descriptor Pointer Register */
+#define                   DMA7_CURR_ADDR  0xffc00de4   /* DMA Channel 7 Current Address Register */
+#define                  DMA7_IRQ_STATUS  0xffc00de8   /* DMA Channel 7 Interrupt/Status Register */
+#define              DMA7_PERIPHERAL_MAP  0xffc00dec   /* DMA Channel 7 Peripheral Map Register */
+#define                DMA7_CURR_X_COUNT  0xffc00df0   /* DMA Channel 7 Current X Count Register */
+#define                DMA7_CURR_Y_COUNT  0xffc00df8   /* DMA Channel 7 Current Y Count Register */
+
+/* DMA Channel 8 Registers */
+
+#define               DMA8_NEXT_DESC_PTR  0xffc00e00   /* DMA Channel 8 Next Descriptor Pointer Register */
+#define                  DMA8_START_ADDR  0xffc00e04   /* DMA Channel 8 Start Address Register */
+#define                      DMA8_CONFIG  0xffc00e08   /* DMA Channel 8 Configuration Register */
+#define                     DMA8_X_COUNT  0xffc00e10   /* DMA Channel 8 X Count Register */
+#define                    DMA8_X_MODIFY  0xffc00e14   /* DMA Channel 8 X Modify Register */
+#define                     DMA8_Y_COUNT  0xffc00e18   /* DMA Channel 8 Y Count Register */
+#define                    DMA8_Y_MODIFY  0xffc00e1c   /* DMA Channel 8 Y Modify Register */
+#define               DMA8_CURR_DESC_PTR  0xffc00e20   /* DMA Channel 8 Current Descriptor Pointer Register */
+#define                   DMA8_CURR_ADDR  0xffc00e24   /* DMA Channel 8 Current Address Register */
+#define                  DMA8_IRQ_STATUS  0xffc00e28   /* DMA Channel 8 Interrupt/Status Register */
+#define              DMA8_PERIPHERAL_MAP  0xffc00e2c   /* DMA Channel 8 Peripheral Map Register */
+#define                DMA8_CURR_X_COUNT  0xffc00e30   /* DMA Channel 8 Current X Count Register */
+#define                DMA8_CURR_Y_COUNT  0xffc00e38   /* DMA Channel 8 Current Y Count Register */
+
+/* DMA Channel 9 Registers */
+
+#define               DMA9_NEXT_DESC_PTR  0xffc00e40   /* DMA Channel 9 Next Descriptor Pointer Register */
+#define                  DMA9_START_ADDR  0xffc00e44   /* DMA Channel 9 Start Address Register */
+#define                      DMA9_CONFIG  0xffc00e48   /* DMA Channel 9 Configuration Register */
+#define                     DMA9_X_COUNT  0xffc00e50   /* DMA Channel 9 X Count Register */
+#define                    DMA9_X_MODIFY  0xffc00e54   /* DMA Channel 9 X Modify Register */
+#define                     DMA9_Y_COUNT  0xffc00e58   /* DMA Channel 9 Y Count Register */
+#define                    DMA9_Y_MODIFY  0xffc00e5c   /* DMA Channel 9 Y Modify Register */
+#define               DMA9_CURR_DESC_PTR  0xffc00e60   /* DMA Channel 9 Current Descriptor Pointer Register */
+#define                   DMA9_CURR_ADDR  0xffc00e64   /* DMA Channel 9 Current Address Register */
+#define                  DMA9_IRQ_STATUS  0xffc00e68   /* DMA Channel 9 Interrupt/Status Register */
+#define              DMA9_PERIPHERAL_MAP  0xffc00e6c   /* DMA Channel 9 Peripheral Map Register */
+#define                DMA9_CURR_X_COUNT  0xffc00e70   /* DMA Channel 9 Current X Count Register */
+#define                DMA9_CURR_Y_COUNT  0xffc00e78   /* DMA Channel 9 Current Y Count Register */
+
+/* DMA Channel 10 Registers */
+
+#define              DMA10_NEXT_DESC_PTR  0xffc00e80   /* DMA Channel 10 Next Descriptor Pointer Register */
+#define                 DMA10_START_ADDR  0xffc00e84   /* DMA Channel 10 Start Address Register */
+#define                     DMA10_CONFIG  0xffc00e88   /* DMA Channel 10 Configuration Register */
+#define                    DMA10_X_COUNT  0xffc00e90   /* DMA Channel 10 X Count Register */
+#define                   DMA10_X_MODIFY  0xffc00e94   /* DMA Channel 10 X Modify Register */
+#define                    DMA10_Y_COUNT  0xffc00e98   /* DMA Channel 10 Y Count Register */
+#define                   DMA10_Y_MODIFY  0xffc00e9c   /* DMA Channel 10 Y Modify Register */
+#define              DMA10_CURR_DESC_PTR  0xffc00ea0   /* DMA Channel 10 Current Descriptor Pointer Register */
+#define                  DMA10_CURR_ADDR  0xffc00ea4   /* DMA Channel 10 Current Address Register */
+#define                 DMA10_IRQ_STATUS  0xffc00ea8   /* DMA Channel 10 Interrupt/Status Register */
+#define             DMA10_PERIPHERAL_MAP  0xffc00eac   /* DMA Channel 10 Peripheral Map Register */
+#define               DMA10_CURR_X_COUNT  0xffc00eb0   /* DMA Channel 10 Current X Count Register */
+#define               DMA10_CURR_Y_COUNT  0xffc00eb8   /* DMA Channel 10 Current Y Count Register */
+
+/* DMA Channel 11 Registers */
+
+#define              DMA11_NEXT_DESC_PTR  0xffc00ec0   /* DMA Channel 11 Next Descriptor Pointer Register */
+#define                 DMA11_START_ADDR  0xffc00ec4   /* DMA Channel 11 Start Address Register */
+#define                     DMA11_CONFIG  0xffc00ec8   /* DMA Channel 11 Configuration Register */
+#define                    DMA11_X_COUNT  0xffc00ed0   /* DMA Channel 11 X Count Register */
+#define                   DMA11_X_MODIFY  0xffc00ed4   /* DMA Channel 11 X Modify Register */
+#define                    DMA11_Y_COUNT  0xffc00ed8   /* DMA Channel 11 Y Count Register */
+#define                   DMA11_Y_MODIFY  0xffc00edc   /* DMA Channel 11 Y Modify Register */
+#define              DMA11_CURR_DESC_PTR  0xffc00ee0   /* DMA Channel 11 Current Descriptor Pointer Register */
+#define                  DMA11_CURR_ADDR  0xffc00ee4   /* DMA Channel 11 Current Address Register */
+#define                 DMA11_IRQ_STATUS  0xffc00ee8   /* DMA Channel 11 Interrupt/Status Register */
+#define             DMA11_PERIPHERAL_MAP  0xffc00eec   /* DMA Channel 11 Peripheral Map Register */
+#define               DMA11_CURR_X_COUNT  0xffc00ef0   /* DMA Channel 11 Current X Count Register */
+#define               DMA11_CURR_Y_COUNT  0xffc00ef8   /* DMA Channel 11 Current Y Count Register */
+
+/* MDMA Stream 0 Registers */
+
+#define            MDMA_D0_NEXT_DESC_PTR  0xffc00f00   /* Memory DMA Stream 0 Destination Next Descriptor Pointer Register */
+#define               MDMA_D0_START_ADDR  0xffc00f04   /* Memory DMA Stream 0 Destination Start Address Register */
+#define                   MDMA_D0_CONFIG  0xffc00f08   /* Memory DMA Stream 0 Destination Configuration Register */
+#define                  MDMA_D0_X_COUNT  0xffc00f10   /* Memory DMA Stream 0 Destination X Count Register */
+#define                 MDMA_D0_X_MODIFY  0xffc00f14   /* Memory DMA Stream 0 Destination X Modify Register */
+#define                  MDMA_D0_Y_COUNT  0xffc00f18   /* Memory DMA Stream 0 Destination Y Count Register */
+#define                 MDMA_D0_Y_MODIFY  0xffc00f1c   /* Memory DMA Stream 0 Destination Y Modify Register */
+#define            MDMA_D0_CURR_DESC_PTR  0xffc00f20   /* Memory DMA Stream 0 Destination Current Descriptor Pointer Register */
+#define                MDMA_D0_CURR_ADDR  0xffc00f24   /* Memory DMA Stream 0 Destination Current Address Register */
+#define               MDMA_D0_IRQ_STATUS  0xffc00f28   /* Memory DMA Stream 0 Destination Interrupt/Status Register */
+#define           MDMA_D0_PERIPHERAL_MAP  0xffc00f2c   /* Memory DMA Stream 0 Destination Peripheral Map Register */
+#define             MDMA_D0_CURR_X_COUNT  0xffc00f30   /* Memory DMA Stream 0 Destination Current X Count Register */
+#define             MDMA_D0_CURR_Y_COUNT  0xffc00f38   /* Memory DMA Stream 0 Destination Current Y Count Register */
+#define            MDMA_S0_NEXT_DESC_PTR  0xffc00f40   /* Memory DMA Stream 0 Source Next Descriptor Pointer Register */
+#define               MDMA_S0_START_ADDR  0xffc00f44   /* Memory DMA Stream 0 Source Start Address Register */
+#define                   MDMA_S0_CONFIG  0xffc00f48   /* Memory DMA Stream 0 Source Configuration Register */
+#define                  MDMA_S0_X_COUNT  0xffc00f50   /* Memory DMA Stream 0 Source X Count Register */
+#define                 MDMA_S0_X_MODIFY  0xffc00f54   /* Memory DMA Stream 0 Source X Modify Register */
+#define                  MDMA_S0_Y_COUNT  0xffc00f58   /* Memory DMA Stream 0 Source Y Count Register */
+#define                 MDMA_S0_Y_MODIFY  0xffc00f5c   /* Memory DMA Stream 0 Source Y Modify Register */
+#define            MDMA_S0_CURR_DESC_PTR  0xffc00f60   /* Memory DMA Stream 0 Source Current Descriptor Pointer Register */
+#define                MDMA_S0_CURR_ADDR  0xffc00f64   /* Memory DMA Stream 0 Source Current Address Register */
+#define               MDMA_S0_IRQ_STATUS  0xffc00f68   /* Memory DMA Stream 0 Source Interrupt/Status Register */
+#define           MDMA_S0_PERIPHERAL_MAP  0xffc00f6c   /* Memory DMA Stream 0 Source Peripheral Map Register */
+#define             MDMA_S0_CURR_X_COUNT  0xffc00f70   /* Memory DMA Stream 0 Source Current X Count Register */
+#define             MDMA_S0_CURR_Y_COUNT  0xffc00f78   /* Memory DMA Stream 0 Source Current Y Count Register */
+
+/* MDMA Stream 1 Registers */
+
+#define            MDMA_D1_NEXT_DESC_PTR  0xffc00f80   /* Memory DMA Stream 1 Destination Next Descriptor Pointer Register */
+#define               MDMA_D1_START_ADDR  0xffc00f84   /* Memory DMA Stream 1 Destination Start Address Register */
+#define                   MDMA_D1_CONFIG  0xffc00f88   /* Memory DMA Stream 1 Destination Configuration Register */
+#define                  MDMA_D1_X_COUNT  0xffc00f90   /* Memory DMA Stream 1 Destination X Count Register */
+#define                 MDMA_D1_X_MODIFY  0xffc00f94   /* Memory DMA Stream 1 Destination X Modify Register */
+#define                  MDMA_D1_Y_COUNT  0xffc00f98   /* Memory DMA Stream 1 Destination Y Count Register */
+#define                 MDMA_D1_Y_MODIFY  0xffc00f9c   /* Memory DMA Stream 1 Destination Y Modify Register */
+#define            MDMA_D1_CURR_DESC_PTR  0xffc00fa0   /* Memory DMA Stream 1 Destination Current Descriptor Pointer Register */
+#define                MDMA_D1_CURR_ADDR  0xffc00fa4   /* Memory DMA Stream 1 Destination Current Address Register */
+#define               MDMA_D1_IRQ_STATUS  0xffc00fa8   /* Memory DMA Stream 1 Destination Interrupt/Status Register */
+#define           MDMA_D1_PERIPHERAL_MAP  0xffc00fac   /* Memory DMA Stream 1 Destination Peripheral Map Register */
+#define             MDMA_D1_CURR_X_COUNT  0xffc00fb0   /* Memory DMA Stream 1 Destination Current X Count Register */
+#define             MDMA_D1_CURR_Y_COUNT  0xffc00fb8   /* Memory DMA Stream 1 Destination Current Y Count Register */
+#define            MDMA_S1_NEXT_DESC_PTR  0xffc00fc0   /* Memory DMA Stream 1 Source Next Descriptor Pointer Register */
+#define               MDMA_S1_START_ADDR  0xffc00fc4   /* Memory DMA Stream 1 Source Start Address Register */
+#define                   MDMA_S1_CONFIG  0xffc00fc8   /* Memory DMA Stream 1 Source Configuration Register */
+#define                  MDMA_S1_X_COUNT  0xffc00fd0   /* Memory DMA Stream 1 Source X Count Register */
+#define                 MDMA_S1_X_MODIFY  0xffc00fd4   /* Memory DMA Stream 1 Source X Modify Register */
+#define                  MDMA_S1_Y_COUNT  0xffc00fd8   /* Memory DMA Stream 1 Source Y Count Register */
+#define                 MDMA_S1_Y_MODIFY  0xffc00fdc   /* Memory DMA Stream 1 Source Y Modify Register */
+#define            MDMA_S1_CURR_DESC_PTR  0xffc00fe0   /* Memory DMA Stream 1 Source Current Descriptor Pointer Register */
+#define                MDMA_S1_CURR_ADDR  0xffc00fe4   /* Memory DMA Stream 1 Source Current Address Register */
+#define               MDMA_S1_IRQ_STATUS  0xffc00fe8   /* Memory DMA Stream 1 Source Interrupt/Status Register */
+#define           MDMA_S1_PERIPHERAL_MAP  0xffc00fec   /* Memory DMA Stream 1 Source Peripheral Map Register */
+#define             MDMA_S1_CURR_X_COUNT  0xffc00ff0   /* Memory DMA Stream 1 Source Current X Count Register */
+#define             MDMA_S1_CURR_Y_COUNT  0xffc00ff8   /* Memory DMA Stream 1 Source Current Y Count Register */
+
+/* UART3 Registers */
+
+#define                        UART3_DLL  0xffc03100   /* Divisor Latch Low Byte */
+#define                        UART3_DLH  0xffc03104   /* Divisor Latch High Byte */
+#define                       UART3_GCTL  0xffc03108   /* Global Control Register */
+#define                        UART3_LCR  0xffc0310c   /* Line Control Register */
+#define                        UART3_MCR  0xffc03110   /* Modem Control Register */
+#define                        UART3_LSR  0xffc03114   /* Line Status Register */
+#define                        UART3_MSR  0xffc03118   /* Modem Status Register */
+#define                        UART3_SCR  0xffc0311c   /* Scratch Register */
+#define                    UART3_IER_SET  0xffc03120   /* Interrupt Enable Register Set */
+#define                  UART3_IER_CLEAR  0xffc03124   /* Interrupt Enable Register Clear */
+#define                        UART3_THR  0xffc03128   /* Transmit Hold Register */
+#define                        UART3_RBR  0xffc0312c   /* Receive Buffer Register */
+
+/* EPPI1 Registers */
+
+#define                     EPPI1_STATUS  0xffc01300   /* EPPI1 Status Register */
+#define                     EPPI1_HCOUNT  0xffc01304   /* EPPI1 Horizontal Transfer Count Register */
+#define                     EPPI1_HDELAY  0xffc01308   /* EPPI1 Horizontal Delay Count Register */
+#define                     EPPI1_VCOUNT  0xffc0130c   /* EPPI1 Vertical Transfer Count Register */
+#define                     EPPI1_VDELAY  0xffc01310   /* EPPI1 Vertical Delay Count Register */
+#define                      EPPI1_FRAME  0xffc01314   /* EPPI1 Lines per Frame Register */
+#define                       EPPI1_LINE  0xffc01318   /* EPPI1 Samples per Line Register */
+#define                     EPPI1_CLKDIV  0xffc0131c   /* EPPI1 Clock Divide Register */
+#define                    EPPI1_CONTROL  0xffc01320   /* EPPI1 Control Register */
+#define                   EPPI1_FS1W_HBL  0xffc01324   /* EPPI1 FS1 Width Register / EPPI1 Horizontal Blanking Samples Per Line Register */
+#define                  EPPI1_FS1P_AVPL  0xffc01328   /* EPPI1 FS1 Period Register / EPPI1 Active Video Samples Per Line Register */
+#define                   EPPI1_FS2W_LVB  0xffc0132c   /* EPPI1 FS2 Width Register / EPPI1 Lines of Vertical Blanking Register */
+#define                  EPPI1_FS2P_LAVF  0xffc01330   /* EPPI1 FS2 Period Register/ EPPI1 Lines of Active Video Per Field Register */
+#define                       EPPI1_CLIP  0xffc01334   /* EPPI1 Clipping Register */
+
+/* Port Interrupt 0 Registers (32-bit) */
+
+#define                   PINT0_MASK_SET  0xffc01400   /* Pin Interrupt 0 Mask Set Register */
+#define                 PINT0_MASK_CLEAR  0xffc01404   /* Pin Interrupt 0 Mask Clear Register */
+#define                    PINT0_REQUEST  0xffc01408   /* Pin Interrupt 0 Interrupt Request Register */
+#define                     PINT0_ASSIGN  0xffc0140c   /* Pin Interrupt 0 Port Assign Register */
+#define                   PINT0_EDGE_SET  0xffc01410   /* Pin Interrupt 0 Edge-sensitivity Set Register */
+#define                 PINT0_EDGE_CLEAR  0xffc01414   /* Pin Interrupt 0 Edge-sensitivity Clear Register */
+#define                 PINT0_INVERT_SET  0xffc01418   /* Pin Interrupt 0 Inversion Set Register */
+#define               PINT0_INVERT_CLEAR  0xffc0141c   /* Pin Interrupt 0 Inversion Clear Register */
+#define                   PINT0_PINSTATE  0xffc01420   /* Pin Interrupt 0 Pin Status Register */
+#define                      PINT0_LATCH  0xffc01424   /* Pin Interrupt 0 Latch Register */
+
+/* Port Interrupt 1 Registers (32-bit) */
+
+#define                   PINT1_MASK_SET  0xffc01430   /* Pin Interrupt 1 Mask Set Register */
+#define                 PINT1_MASK_CLEAR  0xffc01434   /* Pin Interrupt 1 Mask Clear Register */
+#define                    PINT1_REQUEST  0xffc01438   /* Pin Interrupt 1 Interrupt Request Register */
+#define                     PINT1_ASSIGN  0xffc0143c   /* Pin Interrupt 1 Port Assign Register */
+#define                   PINT1_EDGE_SET  0xffc01440   /* Pin Interrupt 1 Edge-sensitivity Set Register */
+#define                 PINT1_EDGE_CLEAR  0xffc01444   /* Pin Interrupt 1 Edge-sensitivity Clear Register */
+#define                 PINT1_INVERT_SET  0xffc01448   /* Pin Interrupt 1 Inversion Set Register */
+#define               PINT1_INVERT_CLEAR  0xffc0144c   /* Pin Interrupt 1 Inversion Clear Register */
+#define                   PINT1_PINSTATE  0xffc01450   /* Pin Interrupt 1 Pin Status Register */
+#define                      PINT1_LATCH  0xffc01454   /* Pin Interrupt 1 Latch Register */
+
+/* Port Interrupt 2 Registers (32-bit) */
+
+#define                   PINT2_MASK_SET  0xffc01460   /* Pin Interrupt 2 Mask Set Register */
+#define                 PINT2_MASK_CLEAR  0xffc01464   /* Pin Interrupt 2 Mask Clear Register */
+#define                    PINT2_REQUEST  0xffc01468   /* Pin Interrupt 2 Interrupt Request Register */
+#define                     PINT2_ASSIGN  0xffc0146c   /* Pin Interrupt 2 Port Assign Register */
+#define                   PINT2_EDGE_SET  0xffc01470   /* Pin Interrupt 2 Edge-sensitivity Set Register */
+#define                 PINT2_EDGE_CLEAR  0xffc01474   /* Pin Interrupt 2 Edge-sensitivity Clear Register */
+#define                 PINT2_INVERT_SET  0xffc01478   /* Pin Interrupt 2 Inversion Set Register */
+#define               PINT2_INVERT_CLEAR  0xffc0147c   /* Pin Interrupt 2 Inversion Clear Register */
+#define                   PINT2_PINSTATE  0xffc01480   /* Pin Interrupt 2 Pin Status Register */
+#define                      PINT2_LATCH  0xffc01484   /* Pin Interrupt 2 Latch Register */
+
+/* Port Interrupt 3 Registers (32-bit) */
+
+#define                   PINT3_MASK_SET  0xffc01490   /* Pin Interrupt 3 Mask Set Register */
+#define                 PINT3_MASK_CLEAR  0xffc01494   /* Pin Interrupt 3 Mask Clear Register */
+#define                    PINT3_REQUEST  0xffc01498   /* Pin Interrupt 3 Interrupt Request Register */
+#define                     PINT3_ASSIGN  0xffc0149c   /* Pin Interrupt 3 Port Assign Register */
+#define                   PINT3_EDGE_SET  0xffc014a0   /* Pin Interrupt 3 Edge-sensitivity Set Register */
+#define                 PINT3_EDGE_CLEAR  0xffc014a4   /* Pin Interrupt 3 Edge-sensitivity Clear Register */
+#define                 PINT3_INVERT_SET  0xffc014a8   /* Pin Interrupt 3 Inversion Set Register */
+#define               PINT3_INVERT_CLEAR  0xffc014ac   /* Pin Interrupt 3 Inversion Clear Register */
+#define                   PINT3_PINSTATE  0xffc014b0   /* Pin Interrupt 3 Pin Status Register */
+#define                      PINT3_LATCH  0xffc014b4   /* Pin Interrupt 3 Latch Register */
+
+/* Port A Registers */
+
+#define                        PORTA_FER  0xffc014c0   /* Function Enable Register */
+#define                            PORTA  0xffc014c4   /* GPIO Data Register */
+#define                        PORTA_SET  0xffc014c8   /* GPIO Data Set Register */
+#define                      PORTA_CLEAR  0xffc014cc   /* GPIO Data Clear Register */
+#define                    PORTA_DIR_SET  0xffc014d0   /* GPIO Direction Set Register */
+#define                  PORTA_DIR_CLEAR  0xffc014d4   /* GPIO Direction Clear Register */
+#define                       PORTA_INEN  0xffc014d8   /* GPIO Input Enable Register */
+#define                        PORTA_MUX  0xffc014dc   /* Multiplexer Control Register */
+
+/* Port B Registers */
+
+#define                        PORTB_FER  0xffc014e0   /* Function Enable Register */
+#define                            PORTB  0xffc014e4   /* GPIO Data Register */
+#define                        PORTB_SET  0xffc014e8   /* GPIO Data Set Register */
+#define                      PORTB_CLEAR  0xffc014ec   /* GPIO Data Clear Register */
+#define                    PORTB_DIR_SET  0xffc014f0   /* GPIO Direction Set Register */
+#define                  PORTB_DIR_CLEAR  0xffc014f4   /* GPIO Direction Clear Register */
+#define                       PORTB_INEN  0xffc014f8   /* GPIO Input Enable Register */
+#define                        PORTB_MUX  0xffc014fc   /* Multiplexer Control Register */
+
+/* Port C Registers */
+
+#define                        PORTC_FER  0xffc01500   /* Function Enable Register */
+#define                            PORTC  0xffc01504   /* GPIO Data Register */
+#define                        PORTC_SET  0xffc01508   /* GPIO Data Set Register */
+#define                      PORTC_CLEAR  0xffc0150c   /* GPIO Data Clear Register */
+#define                    PORTC_DIR_SET  0xffc01510   /* GPIO Direction Set Register */
+#define                  PORTC_DIR_CLEAR  0xffc01514   /* GPIO Direction Clear Register */
+#define                       PORTC_INEN  0xffc01518   /* GPIO Input Enable Register */
+#define                        PORTC_MUX  0xffc0151c   /* Multiplexer Control Register */
+
+/* Port D Registers */
+
+#define                        PORTD_FER  0xffc01520   /* Function Enable Register */
+#define                            PORTD  0xffc01524   /* GPIO Data Register */
+#define                        PORTD_SET  0xffc01528   /* GPIO Data Set Register */
+#define                      PORTD_CLEAR  0xffc0152c   /* GPIO Data Clear Register */
+#define                    PORTD_DIR_SET  0xffc01530   /* GPIO Direction Set Register */
+#define                  PORTD_DIR_CLEAR  0xffc01534   /* GPIO Direction Clear Register */
+#define                       PORTD_INEN  0xffc01538   /* GPIO Input Enable Register */
+#define                        PORTD_MUX  0xffc0153c   /* Multiplexer Control Register */
+
+/* Port E Registers */
+
+#define                        PORTE_FER  0xffc01540   /* Function Enable Register */
+#define                            PORTE  0xffc01544   /* GPIO Data Register */
+#define                        PORTE_SET  0xffc01548   /* GPIO Data Set Register */
+#define                      PORTE_CLEAR  0xffc0154c   /* GPIO Data Clear Register */
+#define                    PORTE_DIR_SET  0xffc01550   /* GPIO Direction Set Register */
+#define                  PORTE_DIR_CLEAR  0xffc01554   /* GPIO Direction Clear Register */
+#define                       PORTE_INEN  0xffc01558   /* GPIO Input Enable Register */
+#define                        PORTE_MUX  0xffc0155c   /* Multiplexer Control Register */
+
+/* Port F Registers */
+
+#define                        PORTF_FER  0xffc01560   /* Function Enable Register */
+#define                            PORTF  0xffc01564   /* GPIO Data Register */
+#define                        PORTF_SET  0xffc01568   /* GPIO Data Set Register */
+#define                      PORTF_CLEAR  0xffc0156c   /* GPIO Data Clear Register */
+#define                    PORTF_DIR_SET  0xffc01570   /* GPIO Direction Set Register */
+#define                  PORTF_DIR_CLEAR  0xffc01574   /* GPIO Direction Clear Register */
+#define                       PORTF_INEN  0xffc01578   /* GPIO Input Enable Register */
+#define                        PORTF_MUX  0xffc0157c   /* Multiplexer Control Register */
+
+/* Port G Registers */
+
+#define                        PORTG_FER  0xffc01580   /* Function Enable Register */
+#define                            PORTG  0xffc01584   /* GPIO Data Register */
+#define                        PORTG_SET  0xffc01588   /* GPIO Data Set Register */
+#define                      PORTG_CLEAR  0xffc0158c   /* GPIO Data Clear Register */
+#define                    PORTG_DIR_SET  0xffc01590   /* GPIO Direction Set Register */
+#define                  PORTG_DIR_CLEAR  0xffc01594   /* GPIO Direction Clear Register */
+#define                       PORTG_INEN  0xffc01598   /* GPIO Input Enable Register */
+#define                        PORTG_MUX  0xffc0159c   /* Multiplexer Control Register */
+
+/* Port H Registers */
+
+#define                        PORTH_FER  0xffc015a0   /* Function Enable Register */
+#define                            PORTH  0xffc015a4   /* GPIO Data Register */
+#define                        PORTH_SET  0xffc015a8   /* GPIO Data Set Register */
+#define                      PORTH_CLEAR  0xffc015ac   /* GPIO Data Clear Register */
+#define                    PORTH_DIR_SET  0xffc015b0   /* GPIO Direction Set Register */
+#define                  PORTH_DIR_CLEAR  0xffc015b4   /* GPIO Direction Clear Register */
+#define                       PORTH_INEN  0xffc015b8   /* GPIO Input Enable Register */
+#define                        PORTH_MUX  0xffc015bc   /* Multiplexer Control Register */
+
+/* Port I Registers */
+
+#define                        PORTI_FER  0xffc015c0   /* Function Enable Register */
+#define                            PORTI  0xffc015c4   /* GPIO Data Register */
+#define                        PORTI_SET  0xffc015c8   /* GPIO Data Set Register */
+#define                      PORTI_CLEAR  0xffc015cc   /* GPIO Data Clear Register */
+#define                    PORTI_DIR_SET  0xffc015d0   /* GPIO Direction Set Register */
+#define                  PORTI_DIR_CLEAR  0xffc015d4   /* GPIO Direction Clear Register */
+#define                       PORTI_INEN  0xffc015d8   /* GPIO Input Enable Register */
+#define                        PORTI_MUX  0xffc015dc   /* Multiplexer Control Register */
+
+/* Port J Registers */
+
+#define                        PORTJ_FER  0xffc015e0   /* Function Enable Register */
+#define                            PORTJ  0xffc015e4   /* GPIO Data Register */
+#define                        PORTJ_SET  0xffc015e8   /* GPIO Data Set Register */
+#define                      PORTJ_CLEAR  0xffc015ec   /* GPIO Data Clear Register */
+#define                    PORTJ_DIR_SET  0xffc015f0   /* GPIO Direction Set Register */
+#define                  PORTJ_DIR_CLEAR  0xffc015f4   /* GPIO Direction Clear Register */
+#define                       PORTJ_INEN  0xffc015f8   /* GPIO Input Enable Register */
+#define                        PORTJ_MUX  0xffc015fc   /* Multiplexer Control Register */
+
+/* PWM Timer Registers */
+
+#define                    TIMER0_CONFIG  0xffc01600   /* Timer 0 Configuration Register */
+#define                   TIMER0_COUNTER  0xffc01604   /* Timer 0 Counter Register */
+#define                    TIMER0_PERIOD  0xffc01608   /* Timer 0 Period Register */
+#define                     TIMER0_WIDTH  0xffc0160c   /* Timer 0 Width Register */
+#define                    TIMER1_CONFIG  0xffc01610   /* Timer 1 Configuration Register */
+#define                   TIMER1_COUNTER  0xffc01614   /* Timer 1 Counter Register */
+#define                    TIMER1_PERIOD  0xffc01618   /* Timer 1 Period Register */
+#define                     TIMER1_WIDTH  0xffc0161c   /* Timer 1 Width Register */
+#define                    TIMER2_CONFIG  0xffc01620   /* Timer 2 Configuration Register */
+#define                   TIMER2_COUNTER  0xffc01624   /* Timer 2 Counter Register */
+#define                    TIMER2_PERIOD  0xffc01628   /* Timer 2 Period Register */
+#define                     TIMER2_WIDTH  0xffc0162c   /* Timer 2 Width Register */
+#define                    TIMER3_CONFIG  0xffc01630   /* Timer 3 Configuration Register */
+#define                   TIMER3_COUNTER  0xffc01634   /* Timer 3 Counter Register */
+#define                    TIMER3_PERIOD  0xffc01638   /* Timer 3 Period Register */
+#define                     TIMER3_WIDTH  0xffc0163c   /* Timer 3 Width Register */
+#define                    TIMER4_CONFIG  0xffc01640   /* Timer 4 Configuration Register */
+#define                   TIMER4_COUNTER  0xffc01644   /* Timer 4 Counter Register */
+#define                    TIMER4_PERIOD  0xffc01648   /* Timer 4 Period Register */
+#define                     TIMER4_WIDTH  0xffc0164c   /* Timer 4 Width Register */
+#define                    TIMER5_CONFIG  0xffc01650   /* Timer 5 Configuration Register */
+#define                   TIMER5_COUNTER  0xffc01654   /* Timer 5 Counter Register */
+#define                    TIMER5_PERIOD  0xffc01658   /* Timer 5 Period Register */
+#define                     TIMER5_WIDTH  0xffc0165c   /* Timer 5 Width Register */
+#define                    TIMER6_CONFIG  0xffc01660   /* Timer 6 Configuration Register */
+#define                   TIMER6_COUNTER  0xffc01664   /* Timer 6 Counter Register */
+#define                    TIMER6_PERIOD  0xffc01668   /* Timer 6 Period Register */
+#define                     TIMER6_WIDTH  0xffc0166c   /* Timer 6 Width Register */
+#define                    TIMER7_CONFIG  0xffc01670   /* Timer 7 Configuration Register */
+#define                   TIMER7_COUNTER  0xffc01674   /* Timer 7 Counter Register */
+#define                    TIMER7_PERIOD  0xffc01678   /* Timer 7 Period Register */
+#define                     TIMER7_WIDTH  0xffc0167c   /* Timer 7 Width Register */
+
+/* Timer Group of 8 */
+
+#define                    TIMER_ENABLE0  0xffc01680   /* Timer Group of 8 Enable Register */
+#define                   TIMER_DISABLE0  0xffc01684   /* Timer Group of 8 Disable Register */
+#define                    TIMER_STATUS0  0xffc01688   /* Timer Group of 8 Status Register */
+
+/* DMAC1 Registers */
+
+#define                     DMAC1_TC_PER  0xffc01b0c   /* DMA Controller 1 Traffic Control Periods Register */
+#define                     DMAC1_TC_CNT  0xffc01b10   /* DMA Controller 1 Current Counts Register */
+
+/* DMA Channel 12 Registers */
+
+#define              DMA12_NEXT_DESC_PTR  0xffc01c00   /* DMA Channel 12 Next Descriptor Pointer Register */
+#define                 DMA12_START_ADDR  0xffc01c04   /* DMA Channel 12 Start Address Register */
+#define                     DMA12_CONFIG  0xffc01c08   /* DMA Channel 12 Configuration Register */
+#define                    DMA12_X_COUNT  0xffc01c10   /* DMA Channel 12 X Count Register */
+#define                   DMA12_X_MODIFY  0xffc01c14   /* DMA Channel 12 X Modify Register */
+#define                    DMA12_Y_COUNT  0xffc01c18   /* DMA Channel 12 Y Count Register */
+#define                   DMA12_Y_MODIFY  0xffc01c1c   /* DMA Channel 12 Y Modify Register */
+#define              DMA12_CURR_DESC_PTR  0xffc01c20   /* DMA Channel 12 Current Descriptor Pointer Register */
+#define                  DMA12_CURR_ADDR  0xffc01c24   /* DMA Channel 12 Current Address Register */
+#define                 DMA12_IRQ_STATUS  0xffc01c28   /* DMA Channel 12 Interrupt/Status Register */
+#define             DMA12_PERIPHERAL_MAP  0xffc01c2c   /* DMA Channel 12 Peripheral Map Register */
+#define               DMA12_CURR_X_COUNT  0xffc01c30   /* DMA Channel 12 Current X Count Register */
+#define               DMA12_CURR_Y_COUNT  0xffc01c38   /* DMA Channel 12 Current Y Count Register */
+
+/* DMA Channel 13 Registers */
+
+#define              DMA13_NEXT_DESC_PTR  0xffc01c40   /* DMA Channel 13 Next Descriptor Pointer Register */
+#define                 DMA13_START_ADDR  0xffc01c44   /* DMA Channel 13 Start Address Register */
+#define                     DMA13_CONFIG  0xffc01c48   /* DMA Channel 13 Configuration Register */
+#define                    DMA13_X_COUNT  0xffc01c50   /* DMA Channel 13 X Count Register */
+#define                   DMA13_X_MODIFY  0xffc01c54   /* DMA Channel 13 X Modify Register */
+#define                    DMA13_Y_COUNT  0xffc01c58   /* DMA Channel 13 Y Count Register */
+#define                   DMA13_Y_MODIFY  0xffc01c5c   /* DMA Channel 13 Y Modify Register */
+#define              DMA13_CURR_DESC_PTR  0xffc01c60   /* DMA Channel 13 Current Descriptor Pointer Register */
+#define                  DMA13_CURR_ADDR  0xffc01c64   /* DMA Channel 13 Current Address Register */
+#define                 DMA13_IRQ_STATUS  0xffc01c68   /* DMA Channel 13 Interrupt/Status Register */
+#define             DMA13_PERIPHERAL_MAP  0xffc01c6c   /* DMA Channel 13 Peripheral Map Register */
+#define               DMA13_CURR_X_COUNT  0xffc01c70   /* DMA Channel 13 Current X Count Register */
+#define               DMA13_CURR_Y_COUNT  0xffc01c78   /* DMA Channel 13 Current Y Count Register */
+
+/* DMA Channel 14 Registers */
+
+#define              DMA14_NEXT_DESC_PTR  0xffc01c80   /* DMA Channel 14 Next Descriptor Pointer Register */
+#define                 DMA14_START_ADDR  0xffc01c84   /* DMA Channel 14 Start Address Register */
+#define                     DMA14_CONFIG  0xffc01c88   /* DMA Channel 14 Configuration Register */
+#define                    DMA14_X_COUNT  0xffc01c90   /* DMA Channel 14 X Count Register */
+#define                   DMA14_X_MODIFY  0xffc01c94   /* DMA Channel 14 X Modify Register */
+#define                    DMA14_Y_COUNT  0xffc01c98   /* DMA Channel 14 Y Count Register */
+#define                   DMA14_Y_MODIFY  0xffc01c9c   /* DMA Channel 14 Y Modify Register */
+#define              DMA14_CURR_DESC_PTR  0xffc01ca0   /* DMA Channel 14 Current Descriptor Pointer Register */
+#define                  DMA14_CURR_ADDR  0xffc01ca4   /* DMA Channel 14 Current Address Register */
+#define                 DMA14_IRQ_STATUS  0xffc01ca8   /* DMA Channel 14 Interrupt/Status Register */
+#define             DMA14_PERIPHERAL_MAP  0xffc01cac   /* DMA Channel 14 Peripheral Map Register */
+#define               DMA14_CURR_X_COUNT  0xffc01cb0   /* DMA Channel 14 Current X Count Register */
+#define               DMA14_CURR_Y_COUNT  0xffc01cb8   /* DMA Channel 14 Current Y Count Register */
+
+/* DMA Channel 15 Registers */
+
+#define              DMA15_NEXT_DESC_PTR  0xffc01cc0   /* DMA Channel 15 Next Descriptor Pointer Register */
+#define                 DMA15_START_ADDR  0xffc01cc4   /* DMA Channel 15 Start Address Register */
+#define                     DMA15_CONFIG  0xffc01cc8   /* DMA Channel 15 Configuration Register */
+#define                    DMA15_X_COUNT  0xffc01cd0   /* DMA Channel 15 X Count Register */
+#define                   DMA15_X_MODIFY  0xffc01cd4   /* DMA Channel 15 X Modify Register */
+#define                    DMA15_Y_COUNT  0xffc01cd8   /* DMA Channel 15 Y Count Register */
+#define                   DMA15_Y_MODIFY  0xffc01cdc   /* DMA Channel 15 Y Modify Register */
+#define              DMA15_CURR_DESC_PTR  0xffc01ce0   /* DMA Channel 15 Current Descriptor Pointer Register */
+#define                  DMA15_CURR_ADDR  0xffc01ce4   /* DMA Channel 15 Current Address Register */
+#define                 DMA15_IRQ_STATUS  0xffc01ce8   /* DMA Channel 15 Interrupt/Status Register */
+#define             DMA15_PERIPHERAL_MAP  0xffc01cec   /* DMA Channel 15 Peripheral Map Register */
+#define               DMA15_CURR_X_COUNT  0xffc01cf0   /* DMA Channel 15 Current X Count Register */
+#define               DMA15_CURR_Y_COUNT  0xffc01cf8   /* DMA Channel 15 Current Y Count Register */
+
+/* DMA Channel 16 Registers */
+
+#define              DMA16_NEXT_DESC_PTR  0xffc01d00   /* DMA Channel 16 Next Descriptor Pointer Register */
+#define                 DMA16_START_ADDR  0xffc01d04   /* DMA Channel 16 Start Address Register */
+#define                     DMA16_CONFIG  0xffc01d08   /* DMA Channel 16 Configuration Register */
+#define                    DMA16_X_COUNT  0xffc01d10   /* DMA Channel 16 X Count Register */
+#define                   DMA16_X_MODIFY  0xffc01d14   /* DMA Channel 16 X Modify Register */
+#define                    DMA16_Y_COUNT  0xffc01d18   /* DMA Channel 16 Y Count Register */
+#define                   DMA16_Y_MODIFY  0xffc01d1c   /* DMA Channel 16 Y Modify Register */
+#define              DMA16_CURR_DESC_PTR  0xffc01d20   /* DMA Channel 16 Current Descriptor Pointer Register */
+#define                  DMA16_CURR_ADDR  0xffc01d24   /* DMA Channel 16 Current Address Register */
+#define                 DMA16_IRQ_STATUS  0xffc01d28   /* DMA Channel 16 Interrupt/Status Register */
+#define             DMA16_PERIPHERAL_MAP  0xffc01d2c   /* DMA Channel 16 Peripheral Map Register */
+#define               DMA16_CURR_X_COUNT  0xffc01d30   /* DMA Channel 16 Current X Count Register */
+#define               DMA16_CURR_Y_COUNT  0xffc01d38   /* DMA Channel 16 Current Y Count Register */
+
+/* DMA Channel 17 Registers */
+
+#define              DMA17_NEXT_DESC_PTR  0xffc01d40   /* DMA Channel 17 Next Descriptor Pointer Register */
+#define                 DMA17_START_ADDR  0xffc01d44   /* DMA Channel 17 Start Address Register */
+#define                     DMA17_CONFIG  0xffc01d48   /* DMA Channel 17 Configuration Register */
+#define                    DMA17_X_COUNT  0xffc01d50   /* DMA Channel 17 X Count Register */
+#define                   DMA17_X_MODIFY  0xffc01d54   /* DMA Channel 17 X Modify Register */
+#define                    DMA17_Y_COUNT  0xffc01d58   /* DMA Channel 17 Y Count Register */
+#define                   DMA17_Y_MODIFY  0xffc01d5c   /* DMA Channel 17 Y Modify Register */
+#define              DMA17_CURR_DESC_PTR  0xffc01d60   /* DMA Channel 17 Current Descriptor Pointer Register */
+#define                  DMA17_CURR_ADDR  0xffc01d64   /* DMA Channel 17 Current Address Register */
+#define                 DMA17_IRQ_STATUS  0xffc01d68   /* DMA Channel 17 Interrupt/Status Register */
+#define             DMA17_PERIPHERAL_MAP  0xffc01d6c   /* DMA Channel 17 Peripheral Map Register */
+#define               DMA17_CURR_X_COUNT  0xffc01d70   /* DMA Channel 17 Current X Count Register */
+#define               DMA17_CURR_Y_COUNT  0xffc01d78   /* DMA Channel 17 Current Y Count Register */
+
+/* DMA Channel 18 Registers */
+
+#define              DMA18_NEXT_DESC_PTR  0xffc01d80   /* DMA Channel 18 Next Descriptor Pointer Register */
+#define                 DMA18_START_ADDR  0xffc01d84   /* DMA Channel 18 Start Address Register */
+#define                     DMA18_CONFIG  0xffc01d88   /* DMA Channel 18 Configuration Register */
+#define                    DMA18_X_COUNT  0xffc01d90   /* DMA Channel 18 X Count Register */
+#define                   DMA18_X_MODIFY  0xffc01d94   /* DMA Channel 18 X Modify Register */
+#define                    DMA18_Y_COUNT  0xffc01d98   /* DMA Channel 18 Y Count Register */
+#define                   DMA18_Y_MODIFY  0xffc01d9c   /* DMA Channel 18 Y Modify Register */
+#define              DMA18_CURR_DESC_PTR  0xffc01da0   /* DMA Channel 18 Current Descriptor Pointer Register */
+#define                  DMA18_CURR_ADDR  0xffc01da4   /* DMA Channel 18 Current Address Register */
+#define                 DMA18_IRQ_STATUS  0xffc01da8   /* DMA Channel 18 Interrupt/Status Register */
+#define             DMA18_PERIPHERAL_MAP  0xffc01dac   /* DMA Channel 18 Peripheral Map Register */
+#define               DMA18_CURR_X_COUNT  0xffc01db0   /* DMA Channel 18 Current X Count Register */
+#define               DMA18_CURR_Y_COUNT  0xffc01db8   /* DMA Channel 18 Current Y Count Register */
+
+/* DMA Channel 19 Registers */
+
+#define              DMA19_NEXT_DESC_PTR  0xffc01dc0   /* DMA Channel 19 Next Descriptor Pointer Register */
+#define                 DMA19_START_ADDR  0xffc01dc4   /* DMA Channel 19 Start Address Register */
+#define                     DMA19_CONFIG  0xffc01dc8   /* DMA Channel 19 Configuration Register */
+#define                    DMA19_X_COUNT  0xffc01dd0   /* DMA Channel 19 X Count Register */
+#define                   DMA19_X_MODIFY  0xffc01dd4   /* DMA Channel 19 X Modify Register */
+#define                    DMA19_Y_COUNT  0xffc01dd8   /* DMA Channel 19 Y Count Register */
+#define                   DMA19_Y_MODIFY  0xffc01ddc   /* DMA Channel 19 Y Modify Register */
+#define              DMA19_CURR_DESC_PTR  0xffc01de0   /* DMA Channel 19 Current Descriptor Pointer Register */
+#define                  DMA19_CURR_ADDR  0xffc01de4   /* DMA Channel 19 Current Address Register */
+#define                 DMA19_IRQ_STATUS  0xffc01de8   /* DMA Channel 19 Interrupt/Status Register */
+#define             DMA19_PERIPHERAL_MAP  0xffc01dec   /* DMA Channel 19 Peripheral Map Register */
+#define               DMA19_CURR_X_COUNT  0xffc01df0   /* DMA Channel 19 Current X Count Register */
+#define               DMA19_CURR_Y_COUNT  0xffc01df8   /* DMA Channel 19 Current Y Count Register */
+
+/* DMA Channel 20 Registers */
+
+#define              DMA20_NEXT_DESC_PTR  0xffc01e00   /* DMA Channel 20 Next Descriptor Pointer Register */
+#define                 DMA20_START_ADDR  0xffc01e04   /* DMA Channel 20 Start Address Register */
+#define                     DMA20_CONFIG  0xffc01e08   /* DMA Channel 20 Configuration Register */
+#define                    DMA20_X_COUNT  0xffc01e10   /* DMA Channel 20 X Count Register */
+#define                   DMA20_X_MODIFY  0xffc01e14   /* DMA Channel 20 X Modify Register */
+#define                    DMA20_Y_COUNT  0xffc01e18   /* DMA Channel 20 Y Count Register */
+#define                   DMA20_Y_MODIFY  0xffc01e1c   /* DMA Channel 20 Y Modify Register */
+#define              DMA20_CURR_DESC_PTR  0xffc01e20   /* DMA Channel 20 Current Descriptor Pointer Register */
+#define                  DMA20_CURR_ADDR  0xffc01e24   /* DMA Channel 20 Current Address Register */
+#define                 DMA20_IRQ_STATUS  0xffc01e28   /* DMA Channel 20 Interrupt/Status Register */
+#define             DMA20_PERIPHERAL_MAP  0xffc01e2c   /* DMA Channel 20 Peripheral Map Register */
+#define               DMA20_CURR_X_COUNT  0xffc01e30   /* DMA Channel 20 Current X Count Register */
+#define               DMA20_CURR_Y_COUNT  0xffc01e38   /* DMA Channel 20 Current Y Count Register */
+
+/* DMA Channel 21 Registers */
+
+#define              DMA21_NEXT_DESC_PTR  0xffc01e40   /* DMA Channel 21 Next Descriptor Pointer Register */
+#define                 DMA21_START_ADDR  0xffc01e44   /* DMA Channel 21 Start Address Register */
+#define                     DMA21_CONFIG  0xffc01e48   /* DMA Channel 21 Configuration Register */
+#define                    DMA21_X_COUNT  0xffc01e50   /* DMA Channel 21 X Count Register */
+#define                   DMA21_X_MODIFY  0xffc01e54   /* DMA Channel 21 X Modify Register */
+#define                    DMA21_Y_COUNT  0xffc01e58   /* DMA Channel 21 Y Count Register */
+#define                   DMA21_Y_MODIFY  0xffc01e5c   /* DMA Channel 21 Y Modify Register */
+#define              DMA21_CURR_DESC_PTR  0xffc01e60   /* DMA Channel 21 Current Descriptor Pointer Register */
+#define                  DMA21_CURR_ADDR  0xffc01e64   /* DMA Channel 21 Current Address Register */
+#define                 DMA21_IRQ_STATUS  0xffc01e68   /* DMA Channel 21 Interrupt/Status Register */
+#define             DMA21_PERIPHERAL_MAP  0xffc01e6c   /* DMA Channel 21 Peripheral Map Register */
+#define               DMA21_CURR_X_COUNT  0xffc01e70   /* DMA Channel 21 Current X Count Register */
+#define               DMA21_CURR_Y_COUNT  0xffc01e78   /* DMA Channel 21 Current Y Count Register */
+
+/* DMA Channel 22 Registers */
+
+#define              DMA22_NEXT_DESC_PTR  0xffc01e80   /* DMA Channel 22 Next Descriptor Pointer Register */
+#define                 DMA22_START_ADDR  0xffc01e84   /* DMA Channel 22 Start Address Register */
+#define                     DMA22_CONFIG  0xffc01e88   /* DMA Channel 22 Configuration Register */
+#define                    DMA22_X_COUNT  0xffc01e90   /* DMA Channel 22 X Count Register */
+#define                   DMA22_X_MODIFY  0xffc01e94   /* DMA Channel 22 X Modify Register */
+#define                    DMA22_Y_COUNT  0xffc01e98   /* DMA Channel 22 Y Count Register */
+#define                   DMA22_Y_MODIFY  0xffc01e9c   /* DMA Channel 22 Y Modify Register */
+#define              DMA22_CURR_DESC_PTR  0xffc01ea0   /* DMA Channel 22 Current Descriptor Pointer Register */
+#define                  DMA22_CURR_ADDR  0xffc01ea4   /* DMA Channel 22 Current Address Register */
+#define                 DMA22_IRQ_STATUS  0xffc01ea8   /* DMA Channel 22 Interrupt/Status Register */
+#define             DMA22_PERIPHERAL_MAP  0xffc01eac   /* DMA Channel 22 Peripheral Map Register */
+#define               DMA22_CURR_X_COUNT  0xffc01eb0   /* DMA Channel 22 Current X Count Register */
+#define               DMA22_CURR_Y_COUNT  0xffc01eb8   /* DMA Channel 22 Current Y Count Register */
+
+/* DMA Channel 23 Registers */
+
+#define              DMA23_NEXT_DESC_PTR  0xffc01ec0   /* DMA Channel 23 Next Descriptor Pointer Register */
+#define                 DMA23_START_ADDR  0xffc01ec4   /* DMA Channel 23 Start Address Register */
+#define                     DMA23_CONFIG  0xffc01ec8   /* DMA Channel 23 Configuration Register */
+#define                    DMA23_X_COUNT  0xffc01ed0   /* DMA Channel 23 X Count Register */
+#define                   DMA23_X_MODIFY  0xffc01ed4   /* DMA Channel 23 X Modify Register */
+#define                    DMA23_Y_COUNT  0xffc01ed8   /* DMA Channel 23 Y Count Register */
+#define                   DMA23_Y_MODIFY  0xffc01edc   /* DMA Channel 23 Y Modify Register */
+#define              DMA23_CURR_DESC_PTR  0xffc01ee0   /* DMA Channel 23 Current Descriptor Pointer Register */
+#define                  DMA23_CURR_ADDR  0xffc01ee4   /* DMA Channel 23 Current Address Register */
+#define                 DMA23_IRQ_STATUS  0xffc01ee8   /* DMA Channel 23 Interrupt/Status Register */
+#define             DMA23_PERIPHERAL_MAP  0xffc01eec   /* DMA Channel 23 Peripheral Map Register */
+#define               DMA23_CURR_X_COUNT  0xffc01ef0   /* DMA Channel 23 Current X Count Register */
+#define               DMA23_CURR_Y_COUNT  0xffc01ef8   /* DMA Channel 23 Current Y Count Register */
+
+/* MDMA Stream 2 Registers */
+
+#define            MDMA_D2_NEXT_DESC_PTR  0xffc01f00   /* Memory DMA Stream 2 Destination Next Descriptor Pointer Register */
+#define               MDMA_D2_START_ADDR  0xffc01f04   /* Memory DMA Stream 2 Destination Start Address Register */
+#define                   MDMA_D2_CONFIG  0xffc01f08   /* Memory DMA Stream 2 Destination Configuration Register */
+#define                  MDMA_D2_X_COUNT  0xffc01f10   /* Memory DMA Stream 2 Destination X Count Register */
+#define                 MDMA_D2_X_MODIFY  0xffc01f14   /* Memory DMA Stream 2 Destination X Modify Register */
+#define                  MDMA_D2_Y_COUNT  0xffc01f18   /* Memory DMA Stream 2 Destination Y Count Register */
+#define                 MDMA_D2_Y_MODIFY  0xffc01f1c   /* Memory DMA Stream 2 Destination Y Modify Register */
+#define            MDMA_D2_CURR_DESC_PTR  0xffc01f20   /* Memory DMA Stream 2 Destination Current Descriptor Pointer Register */
+#define                MDMA_D2_CURR_ADDR  0xffc01f24   /* Memory DMA Stream 2 Destination Current Address Register */
+#define               MDMA_D2_IRQ_STATUS  0xffc01f28   /* Memory DMA Stream 2 Destination Interrupt/Status Register */
+#define           MDMA_D2_PERIPHERAL_MAP  0xffc01f2c   /* Memory DMA Stream 2 Destination Peripheral Map Register */
+#define             MDMA_D2_CURR_X_COUNT  0xffc01f30   /* Memory DMA Stream 2 Destination Current X Count Register */
+#define             MDMA_D2_CURR_Y_COUNT  0xffc01f38   /* Memory DMA Stream 2 Destination Current Y Count Register */
+#define            MDMA_S2_NEXT_DESC_PTR  0xffc01f40   /* Memory DMA Stream 2 Source Next Descriptor Pointer Register */
+#define               MDMA_S2_START_ADDR  0xffc01f44   /* Memory DMA Stream 2 Source Start Address Register */
+#define                   MDMA_S2_CONFIG  0xffc01f48   /* Memory DMA Stream 2 Source Configuration Register */
+#define                  MDMA_S2_X_COUNT  0xffc01f50   /* Memory DMA Stream 2 Source X Count Register */
+#define                 MDMA_S2_X_MODIFY  0xffc01f54   /* Memory DMA Stream 2 Source X Modify Register */
+#define                  MDMA_S2_Y_COUNT  0xffc01f58   /* Memory DMA Stream 2 Source Y Count Register */
+#define                 MDMA_S2_Y_MODIFY  0xffc01f5c   /* Memory DMA Stream 2 Source Y Modify Register */
+#define            MDMA_S2_CURR_DESC_PTR  0xffc01f60   /* Memory DMA Stream 2 Source Current Descriptor Pointer Register */
+#define                MDMA_S2_CURR_ADDR  0xffc01f64   /* Memory DMA Stream 2 Source Current Address Register */
+#define               MDMA_S2_IRQ_STATUS  0xffc01f68   /* Memory DMA Stream 2 Source Interrupt/Status Register */
+#define           MDMA_S2_PERIPHERAL_MAP  0xffc01f6c   /* Memory DMA Stream 2 Source Peripheral Map Register */
+#define             MDMA_S2_CURR_X_COUNT  0xffc01f70   /* Memory DMA Stream 2 Source Current X Count Register */
+#define             MDMA_S2_CURR_Y_COUNT  0xffc01f78   /* Memory DMA Stream 2 Source Current Y Count Register */
+
+/* MDMA Stream 3 Registers */
+
+#define            MDMA_D3_NEXT_DESC_PTR  0xffc01f80   /* Memory DMA Stream 3 Destination Next Descriptor Pointer Register */
+#define               MDMA_D3_START_ADDR  0xffc01f84   /* Memory DMA Stream 3 Destination Start Address Register */
+#define                   MDMA_D3_CONFIG  0xffc01f88   /* Memory DMA Stream 3 Destination Configuration Register */
+#define                  MDMA_D3_X_COUNT  0xffc01f90   /* Memory DMA Stream 3 Destination X Count Register */
+#define                 MDMA_D3_X_MODIFY  0xffc01f94   /* Memory DMA Stream 3 Destination X Modify Register */
+#define                  MDMA_D3_Y_COUNT  0xffc01f98   /* Memory DMA Stream 3 Destination Y Count Register */
+#define                 MDMA_D3_Y_MODIFY  0xffc01f9c   /* Memory DMA Stream 3 Destination Y Modify Register */
+#define            MDMA_D3_CURR_DESC_PTR  0xffc01fa0   /* Memory DMA Stream 3 Destination Current Descriptor Pointer Register */
+#define                MDMA_D3_CURR_ADDR  0xffc01fa4   /* Memory DMA Stream 3 Destination Current Address Register */
+#define               MDMA_D3_IRQ_STATUS  0xffc01fa8   /* Memory DMA Stream 3 Destination Interrupt/Status Register */
+#define           MDMA_D3_PERIPHERAL_MAP  0xffc01fac   /* Memory DMA Stream 3 Destination Peripheral Map Register */
+#define             MDMA_D3_CURR_X_COUNT  0xffc01fb0   /* Memory DMA Stream 3 Destination Current X Count Register */
+#define             MDMA_D3_CURR_Y_COUNT  0xffc01fb8   /* Memory DMA Stream 3 Destination Current Y Count Register */
+#define            MDMA_S3_NEXT_DESC_PTR  0xffc01fc0   /* Memory DMA Stream 3 Source Next Descriptor Pointer Register */
+#define               MDMA_S3_START_ADDR  0xffc01fc4   /* Memory DMA Stream 3 Source Start Address Register */
+#define                   MDMA_S3_CONFIG  0xffc01fc8   /* Memory DMA Stream 3 Source Configuration Register */
+#define                  MDMA_S3_X_COUNT  0xffc01fd0   /* Memory DMA Stream 3 Source X Count Register */
+#define                 MDMA_S3_X_MODIFY  0xffc01fd4   /* Memory DMA Stream 3 Source X Modify Register */
+#define                  MDMA_S3_Y_COUNT  0xffc01fd8   /* Memory DMA Stream 3 Source Y Count Register */
+#define                 MDMA_S3_Y_MODIFY  0xffc01fdc   /* Memory DMA Stream 3 Source Y Modify Register */
+#define            MDMA_S3_CURR_DESC_PTR  0xffc01fe0   /* Memory DMA Stream 3 Source Current Descriptor Pointer Register */
+#define                MDMA_S3_CURR_ADDR  0xffc01fe4   /* Memory DMA Stream 3 Source Current Address Register */
+#define               MDMA_S3_IRQ_STATUS  0xffc01fe8   /* Memory DMA Stream 3 Source Interrupt/Status Register */
+#define           MDMA_S3_PERIPHERAL_MAP  0xffc01fec   /* Memory DMA Stream 3 Source Peripheral Map Register */
+#define             MDMA_S3_CURR_X_COUNT  0xffc01ff0   /* Memory DMA Stream 3 Source Current X Count Register */
+#define             MDMA_S3_CURR_Y_COUNT  0xffc01ff8   /* Memory DMA Stream 3 Source Current Y Count Register */
+
+/* UART1 Registers */
+
+#define                        UART1_DLL  0xffc02000   /* Divisor Latch Low Byte */
+#define                        UART1_DLH  0xffc02004   /* Divisor Latch High Byte */
+#define                       UART1_GCTL  0xffc02008   /* Global Control Register */
+#define                        UART1_LCR  0xffc0200c   /* Line Control Register */
+#define                        UART1_MCR  0xffc02010   /* Modem Control Register */
+#define                        UART1_LSR  0xffc02014   /* Line Status Register */
+#define                        UART1_MSR  0xffc02018   /* Modem Status Register */
+#define                        UART1_SCR  0xffc0201c   /* Scratch Register */
+#define                    UART1_IER_SET  0xffc02020   /* Interrupt Enable Register Set */
+#define                  UART1_IER_CLEAR  0xffc02024   /* Interrupt Enable Register Clear */
+#define                        UART1_THR  0xffc02028   /* Transmit Hold Register */
+#define                        UART1_RBR  0xffc0202c   /* Receive Buffer Register */
+
+/* UART2 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 processors */
+
+/* SPI1 Registers */
+
+#define                     SPI1_REGBASE  0xffc02300
+#define                         SPI1_CTL  0xffc02300   /* SPI1 Control Register */
+#define                         SPI1_FLG  0xffc02304   /* SPI1 Flag Register */
+#define                        SPI1_STAT  0xffc02308   /* SPI1 Status Register */
+#define                        SPI1_TDBR  0xffc0230c   /* SPI1 Transmit Data Buffer Register */
+#define                        SPI1_RDBR  0xffc02310   /* SPI1 Receive Data Buffer Register */
+#define                        SPI1_BAUD  0xffc02314   /* SPI1 Baud Rate Register */
+#define                      SPI1_SHADOW  0xffc02318   /* SPI1 Receive Data Buffer Shadow Register */
+
+/* SPORT2 Registers */
+
+#define                      SPORT2_TCR1  0xffc02500   /* SPORT2 Transmit Configuration 1 Register */
+#define                      SPORT2_TCR2  0xffc02504   /* SPORT2 Transmit Configuration 2 Register */
+#define                   SPORT2_TCLKDIV  0xffc02508   /* SPORT2 Transmit Serial Clock Divider Register */
+#define                    SPORT2_TFSDIV  0xffc0250c   /* SPORT2 Transmit Frame Sync Divider Register */
+#define                        SPORT2_TX  0xffc02510   /* SPORT2 Transmit Data Register */
+#define                        SPORT2_RX  0xffc02518   /* SPORT2 Receive Data Register */
+#define                      SPORT2_RCR1  0xffc02520   /* SPORT2 Receive Configuration 1 Register */
+#define                      SPORT2_RCR2  0xffc02524   /* SPORT2 Receive Configuration 2 Register */
+#define                   SPORT2_RCLKDIV  0xffc02528   /* SPORT2 Receive Serial Clock Divider Register */
+#define                    SPORT2_RFSDIV  0xffc0252c   /* SPORT2 Receive Frame Sync Divider Register */
+#define                      SPORT2_STAT  0xffc02530   /* SPORT2 Status Register */
+#define                      SPORT2_CHNL  0xffc02534   /* SPORT2 Current Channel Register */
+#define                     SPORT2_MCMC1  0xffc02538   /* SPORT2 Multi channel Configuration Register 1 */
+#define                     SPORT2_MCMC2  0xffc0253c   /* SPORT2 Multi channel Configuration Register 2 */
+#define                     SPORT2_MTCS0  0xffc02540   /* SPORT2 Multi channel Transmit Select Register 0 */
+#define                     SPORT2_MTCS1  0xffc02544   /* SPORT2 Multi channel Transmit Select Register 1 */
+#define                     SPORT2_MTCS2  0xffc02548   /* SPORT2 Multi channel Transmit Select Register 2 */
+#define                     SPORT2_MTCS3  0xffc0254c   /* SPORT2 Multi channel Transmit Select Register 3 */
+#define                     SPORT2_MRCS0  0xffc02550   /* SPORT2 Multi channel Receive Select Register 0 */
+#define                     SPORT2_MRCS1  0xffc02554   /* SPORT2 Multi channel Receive Select Register 1 */
+#define                     SPORT2_MRCS2  0xffc02558   /* SPORT2 Multi channel Receive Select Register 2 */
+#define                     SPORT2_MRCS3  0xffc0255c   /* SPORT2 Multi channel Receive Select Register 3 */
+
+/* SPORT3 Registers */
+
+#define                      SPORT3_TCR1  0xffc02600   /* SPORT3 Transmit Configuration 1 Register */
+#define                      SPORT3_TCR2  0xffc02604   /* SPORT3 Transmit Configuration 2 Register */
+#define                   SPORT3_TCLKDIV  0xffc02608   /* SPORT3 Transmit Serial Clock Divider Register */
+#define                    SPORT3_TFSDIV  0xffc0260c   /* SPORT3 Transmit Frame Sync Divider Register */
+#define                        SPORT3_TX  0xffc02610   /* SPORT3 Transmit Data Register */
+#define                        SPORT3_RX  0xffc02618   /* SPORT3 Receive Data Register */
+#define                      SPORT3_RCR1  0xffc02620   /* SPORT3 Receive Configuration 1 Register */
+#define                      SPORT3_RCR2  0xffc02624   /* SPORT3 Receive Configuration 2 Register */
+#define                   SPORT3_RCLKDIV  0xffc02628   /* SPORT3 Receive Serial Clock Divider Register */
+#define                    SPORT3_RFSDIV  0xffc0262c   /* SPORT3 Receive Frame Sync Divider Register */
+#define                      SPORT3_STAT  0xffc02630   /* SPORT3 Status Register */
+#define                      SPORT3_CHNL  0xffc02634   /* SPORT3 Current Channel Register */
+#define                     SPORT3_MCMC1  0xffc02638   /* SPORT3 Multi channel Configuration Register 1 */
+#define                     SPORT3_MCMC2  0xffc0263c   /* SPORT3 Multi channel Configuration Register 2 */
+#define                     SPORT3_MTCS0  0xffc02640   /* SPORT3 Multi channel Transmit Select Register 0 */
+#define                     SPORT3_MTCS1  0xffc02644   /* SPORT3 Multi channel Transmit Select Register 1 */
+#define                     SPORT3_MTCS2  0xffc02648   /* SPORT3 Multi channel Transmit Select Register 2 */
+#define                     SPORT3_MTCS3  0xffc0264c   /* SPORT3 Multi channel Transmit Select Register 3 */
+#define                     SPORT3_MRCS0  0xffc02650   /* SPORT3 Multi channel Receive Select Register 0 */
+#define                     SPORT3_MRCS1  0xffc02654   /* SPORT3 Multi channel Receive Select Register 1 */
+#define                     SPORT3_MRCS2  0xffc02658   /* SPORT3 Multi channel Receive Select Register 2 */
+#define                     SPORT3_MRCS3  0xffc0265c   /* SPORT3 Multi channel Receive Select Register 3 */
+
+/* EPPI2 Registers */
+
+#define                     EPPI2_STATUS  0xffc02900   /* EPPI2 Status Register */
+#define                     EPPI2_HCOUNT  0xffc02904   /* EPPI2 Horizontal Transfer Count Register */
+#define                     EPPI2_HDELAY  0xffc02908   /* EPPI2 Horizontal Delay Count Register */
+#define                     EPPI2_VCOUNT  0xffc0290c   /* EPPI2 Vertical Transfer Count Register */
+#define                     EPPI2_VDELAY  0xffc02910   /* EPPI2 Vertical Delay Count Register */
+#define                      EPPI2_FRAME  0xffc02914   /* EPPI2 Lines per Frame Register */
+#define                       EPPI2_LINE  0xffc02918   /* EPPI2 Samples per Line Register */
+#define                     EPPI2_CLKDIV  0xffc0291c   /* EPPI2 Clock Divide Register */
+#define                    EPPI2_CONTROL  0xffc02920   /* EPPI2 Control Register */
+#define                   EPPI2_FS1W_HBL  0xffc02924   /* EPPI2 FS1 Width Register / EPPI2 Horizontal Blanking Samples Per Line Register */
+#define                  EPPI2_FS1P_AVPL  0xffc02928   /* EPPI2 FS1 Period Register / EPPI2 Active Video Samples Per Line Register */
+#define                   EPPI2_FS2W_LVB  0xffc0292c   /* EPPI2 FS2 Width Register / EPPI2 Lines of Vertical Blanking Register */
+#define                  EPPI2_FS2P_LAVF  0xffc02930   /* EPPI2 FS2 Period Register/ EPPI2 Lines of Active Video Per Field Register */
+#define                       EPPI2_CLIP  0xffc02934   /* EPPI2 Clipping Register */
+
+/* CAN Controller 0 Config 1 Registers */
+
+#define                         CAN0_MC1  0xffc02a00   /* CAN Controller 0 Mailbox Configuration Register 1 */
+#define                         CAN0_MD1  0xffc02a04   /* CAN Controller 0 Mailbox Direction Register 1 */
+#define                        CAN0_TRS1  0xffc02a08   /* CAN Controller 0 Transmit Request Set Register 1 */
+#define                        CAN0_TRR1  0xffc02a0c   /* CAN Controller 0 Transmit Request Reset Register 1 */
+#define                         CAN0_TA1  0xffc02a10   /* CAN Controller 0 Transmit Acknowledge Register 1 */
+#define                         CAN0_AA1  0xffc02a14   /* CAN Controller 0 Abort Acknowledge Register 1 */
+#define                        CAN0_RMP1  0xffc02a18   /* CAN Controller 0 Receive Message Pending Register 1 */
+#define                        CAN0_RML1  0xffc02a1c   /* CAN Controller 0 Receive Message Lost Register 1 */
+#define                      CAN0_MBTIF1  0xffc02a20   /* CAN Controller 0 Mailbox Transmit Interrupt Flag Register 1 */
+#define                      CAN0_MBRIF1  0xffc02a24   /* CAN Controller 0 Mailbox Receive Interrupt Flag Register 1 */
+#define                       CAN0_MBIM1  0xffc02a28   /* CAN Controller 0 Mailbox Interrupt Mask Register 1 */
+#define                        CAN0_RFH1  0xffc02a2c   /* CAN Controller 0 Remote Frame Handling Enable Register 1 */
+#define                       CAN0_OPSS1  0xffc02a30   /* CAN Controller 0 Overwrite Protection Single Shot Transmit Register 1 */
+
+/* CAN Controller 0 Config 2 Registers */
+
+#define                         CAN0_MC2  0xffc02a40   /* CAN Controller 0 Mailbox Configuration Register 2 */
+#define                         CAN0_MD2  0xffc02a44   /* CAN Controller 0 Mailbox Direction Register 2 */
+#define                        CAN0_TRS2  0xffc02a48   /* CAN Controller 0 Transmit Request Set Register 2 */
+#define                        CAN0_TRR2  0xffc02a4c   /* CAN Controller 0 Transmit Request Reset Register 2 */
+#define                         CAN0_TA2  0xffc02a50   /* CAN Controller 0 Transmit Acknowledge Register 2 */
+#define                         CAN0_AA2  0xffc02a54   /* CAN Controller 0 Abort Acknowledge Register 2 */
+#define                        CAN0_RMP2  0xffc02a58   /* CAN Controller 0 Receive Message Pending Register 2 */
+#define                        CAN0_RML2  0xffc02a5c   /* CAN Controller 0 Receive Message Lost Register 2 */
+#define                      CAN0_MBTIF2  0xffc02a60   /* CAN Controller 0 Mailbox Transmit Interrupt Flag Register 2 */
+#define                      CAN0_MBRIF2  0xffc02a64   /* CAN Controller 0 Mailbox Receive Interrupt Flag Register 2 */
+#define                       CAN0_MBIM2  0xffc02a68   /* CAN Controller 0 Mailbox Interrupt Mask Register 2 */
+#define                        CAN0_RFH2  0xffc02a6c   /* CAN Controller 0 Remote Frame Handling Enable Register 2 */
+#define                       CAN0_OPSS2  0xffc02a70   /* CAN Controller 0 Overwrite Protection Single Shot Transmit Register 2 */
+
+/* CAN Controller 0 Clock/Interrupt/Counter Registers */
+
+#define                       CAN0_CLOCK  0xffc02a80   /* CAN Controller 0 Clock Register */
+#define                      CAN0_TIMING  0xffc02a84   /* CAN Controller 0 Timing Register */
+#define                       CAN0_DEBUG  0xffc02a88   /* CAN Controller 0 Debug Register */
+#define                      CAN0_STATUS  0xffc02a8c   /* CAN Controller 0 Global Status Register */
+#define                         CAN0_CEC  0xffc02a90   /* CAN Controller 0 Error Counter Register */
+#define                         CAN0_GIS  0xffc02a94   /* CAN Controller 0 Global Interrupt Status Register */
+#define                         CAN0_GIM  0xffc02a98   /* CAN Controller 0 Global Interrupt Mask Register */
+#define                         CAN0_GIF  0xffc02a9c   /* CAN Controller 0 Global Interrupt Flag Register */
+#define                     CAN0_CONTROL  0xffc02aa0   /* CAN Controller 0 Master Control Register */
+#define                        CAN0_INTR  0xffc02aa4   /* CAN Controller 0 Interrupt Pending Register */
+#define                        CAN0_MBTD  0xffc02aac   /* CAN Controller 0 Mailbox Temporary Disable Register */
+#define                         CAN0_EWR  0xffc02ab0   /* CAN Controller 0 Programmable Warning Level Register */
+#define                         CAN0_ESR  0xffc02ab4   /* CAN Controller 0 Error Status Register */
+#define                       CAN0_UCCNT  0xffc02ac4   /* CAN Controller 0 Universal Counter Register */
+#define                        CAN0_UCRC  0xffc02ac8   /* CAN Controller 0 Universal Counter Force Reload Register */
+#define                       CAN0_UCCNF  0xffc02acc   /* CAN Controller 0 Universal Counter Configuration Register */
+
+/* CAN Controller 0 Acceptance Registers */
+
+#define                       CAN0_AM00L  0xffc02b00   /* CAN Controller 0 Mailbox 0 Acceptance Mask High Register */
+#define                       CAN0_AM00H  0xffc02b04   /* CAN Controller 0 Mailbox 0 Acceptance Mask Low Register */
+#define                       CAN0_AM01L  0xffc02b08   /* CAN Controller 0 Mailbox 1 Acceptance Mask High Register */
+#define                       CAN0_AM01H  0xffc02b0c   /* CAN Controller 0 Mailbox 1 Acceptance Mask Low Register */
+#define                       CAN0_AM02L  0xffc02b10   /* CAN Controller 0 Mailbox 2 Acceptance Mask High Register */
+#define                       CAN0_AM02H  0xffc02b14   /* CAN Controller 0 Mailbox 2 Acceptance Mask Low Register */
+#define                       CAN0_AM03L  0xffc02b18   /* CAN Controller 0 Mailbox 3 Acceptance Mask High Register */
+#define                       CAN0_AM03H  0xffc02b1c   /* CAN Controller 0 Mailbox 3 Acceptance Mask Low Register */
+#define                       CAN0_AM04L  0xffc02b20   /* CAN Controller 0 Mailbox 4 Acceptance Mask High Register */
+#define                       CAN0_AM04H  0xffc02b24   /* CAN Controller 0 Mailbox 4 Acceptance Mask Low Register */
+#define                       CAN0_AM05L  0xffc02b28   /* CAN Controller 0 Mailbox 5 Acceptance Mask High Register */
+#define                       CAN0_AM05H  0xffc02b2c   /* CAN Controller 0 Mailbox 5 Acceptance Mask Low Register */
+#define                       CAN0_AM06L  0xffc02b30   /* CAN Controller 0 Mailbox 6 Acceptance Mask High Register */
+#define                       CAN0_AM06H  0xffc02b34   /* CAN Controller 0 Mailbox 6 Acceptance Mask Low Register */
+#define                       CAN0_AM07L  0xffc02b38   /* CAN Controller 0 Mailbox 7 Acceptance Mask High Register */
+#define                       CAN0_AM07H  0xffc02b3c   /* CAN Controller 0 Mailbox 7 Acceptance Mask Low Register */
+#define                       CAN0_AM08L  0xffc02b40   /* CAN Controller 0 Mailbox 8 Acceptance Mask High Register */
+#define                       CAN0_AM08H  0xffc02b44   /* CAN Controller 0 Mailbox 8 Acceptance Mask Low Register */
+#define                       CAN0_AM09L  0xffc02b48   /* CAN Controller 0 Mailbox 9 Acceptance Mask High Register */
+#define                       CAN0_AM09H  0xffc02b4c   /* CAN Controller 0 Mailbox 9 Acceptance Mask Low Register */
+#define                       CAN0_AM10L  0xffc02b50   /* CAN Controller 0 Mailbox 10 Acceptance Mask High Register */
+#define                       CAN0_AM10H  0xffc02b54   /* CAN Controller 0 Mailbox 10 Acceptance Mask Low Register */
+#define                       CAN0_AM11L  0xffc02b58   /* CAN Controller 0 Mailbox 11 Acceptance Mask High Register */
+#define                       CAN0_AM11H  0xffc02b5c   /* CAN Controller 0 Mailbox 11 Acceptance Mask Low Register */
+#define                       CAN0_AM12L  0xffc02b60   /* CAN Controller 0 Mailbox 12 Acceptance Mask High Register */
+#define                       CAN0_AM12H  0xffc02b64   /* CAN Controller 0 Mailbox 12 Acceptance Mask Low Register */
+#define                       CAN0_AM13L  0xffc02b68   /* CAN Controller 0 Mailbox 13 Acceptance Mask High Register */
+#define                       CAN0_AM13H  0xffc02b6c   /* CAN Controller 0 Mailbox 13 Acceptance Mask Low Register */
+#define                       CAN0_AM14L  0xffc02b70   /* CAN Controller 0 Mailbox 14 Acceptance Mask High Register */
+#define                       CAN0_AM14H  0xffc02b74   /* CAN Controller 0 Mailbox 14 Acceptance Mask Low Register */
+#define                       CAN0_AM15L  0xffc02b78   /* CAN Controller 0 Mailbox 15 Acceptance Mask High Register */
+#define                       CAN0_AM15H  0xffc02b7c   /* CAN Controller 0 Mailbox 15 Acceptance Mask Low Register */
+
+/* CAN Controller 0 Acceptance Registers */
+
+#define                       CAN0_AM16L  0xffc02b80   /* CAN Controller 0 Mailbox 16 Acceptance Mask High Register */
+#define                       CAN0_AM16H  0xffc02b84   /* CAN Controller 0 Mailbox 16 Acceptance Mask Low Register */
+#define                       CAN0_AM17L  0xffc02b88   /* CAN Controller 0 Mailbox 17 Acceptance Mask High Register */
+#define                       CAN0_AM17H  0xffc02b8c   /* CAN Controller 0 Mailbox 17 Acceptance Mask Low Register */
+#define                       CAN0_AM18L  0xffc02b90   /* CAN Controller 0 Mailbox 18 Acceptance Mask High Register */
+#define                       CAN0_AM18H  0xffc02b94   /* CAN Controller 0 Mailbox 18 Acceptance Mask Low Register */
+#define                       CAN0_AM19L  0xffc02b98   /* CAN Controller 0 Mailbox 19 Acceptance Mask High Register */
+#define                       CAN0_AM19H  0xffc02b9c   /* CAN Controller 0 Mailbox 19 Acceptance Mask Low Register */
+#define                       CAN0_AM20L  0xffc02ba0   /* CAN Controller 0 Mailbox 20 Acceptance Mask High Register */
+#define                       CAN0_AM20H  0xffc02ba4   /* CAN Controller 0 Mailbox 20 Acceptance Mask Low Register */
+#define                       CAN0_AM21L  0xffc02ba8   /* CAN Controller 0 Mailbox 21 Acceptance Mask High Register */
+#define                       CAN0_AM21H  0xffc02bac   /* CAN Controller 0 Mailbox 21 Acceptance Mask Low Register */
+#define                       CAN0_AM22L  0xffc02bb0   /* CAN Controller 0 Mailbox 22 Acceptance Mask High Register */
+#define                       CAN0_AM22H  0xffc02bb4   /* CAN Controller 0 Mailbox 22 Acceptance Mask Low Register */
+#define                       CAN0_AM23L  0xffc02bb8   /* CAN Controller 0 Mailbox 23 Acceptance Mask High Register */
+#define                       CAN0_AM23H  0xffc02bbc   /* CAN Controller 0 Mailbox 23 Acceptance Mask Low Register */
+#define                       CAN0_AM24L  0xffc02bc0   /* CAN Controller 0 Mailbox 24 Acceptance Mask High Register */
+#define                       CAN0_AM24H  0xffc02bc4   /* CAN Controller 0 Mailbox 24 Acceptance Mask Low Register */
+#define                       CAN0_AM25L  0xffc02bc8   /* CAN Controller 0 Mailbox 25 Acceptance Mask High Register */
+#define                       CAN0_AM25H  0xffc02bcc   /* CAN Controller 0 Mailbox 25 Acceptance Mask Low Register */
+#define                       CAN0_AM26L  0xffc02bd0   /* CAN Controller 0 Mailbox 26 Acceptance Mask High Register */
+#define                       CAN0_AM26H  0xffc02bd4   /* CAN Controller 0 Mailbox 26 Acceptance Mask Low Register */
+#define                       CAN0_AM27L  0xffc02bd8   /* CAN Controller 0 Mailbox 27 Acceptance Mask High Register */
+#define                       CAN0_AM27H  0xffc02bdc   /* CAN Controller 0 Mailbox 27 Acceptance Mask Low Register */
+#define                       CAN0_AM28L  0xffc02be0   /* CAN Controller 0 Mailbox 28 Acceptance Mask High Register */
+#define                       CAN0_AM28H  0xffc02be4   /* CAN Controller 0 Mailbox 28 Acceptance Mask Low Register */
+#define                       CAN0_AM29L  0xffc02be8   /* CAN Controller 0 Mailbox 29 Acceptance Mask High Register */
+#define                       CAN0_AM29H  0xffc02bec   /* CAN Controller 0 Mailbox 29 Acceptance Mask Low Register */
+#define                       CAN0_AM30L  0xffc02bf0   /* CAN Controller 0 Mailbox 30 Acceptance Mask High Register */
+#define                       CAN0_AM30H  0xffc02bf4   /* CAN Controller 0 Mailbox 30 Acceptance Mask Low Register */
+#define                       CAN0_AM31L  0xffc02bf8   /* CAN Controller 0 Mailbox 31 Acceptance Mask High Register */
+#define                       CAN0_AM31H  0xffc02bfc   /* CAN Controller 0 Mailbox 31 Acceptance Mask Low Register */
+
+/* CAN Controller 0 Mailbox Data Registers */
+
+#define                  CAN0_MB00_DATA0  0xffc02c00   /* CAN Controller 0 Mailbox 0 Data 0 Register */
+#define                  CAN0_MB00_DATA1  0xffc02c04   /* CAN Controller 0 Mailbox 0 Data 1 Register */
+#define                  CAN0_MB00_DATA2  0xffc02c08   /* CAN Controller 0 Mailbox 0 Data 2 Register */
+#define                  CAN0_MB00_DATA3  0xffc02c0c   /* CAN Controller 0 Mailbox 0 Data 3 Register */
+#define                 CAN0_MB00_LENGTH  0xffc02c10   /* CAN Controller 0 Mailbox 0 Length Register */
+#define              CAN0_MB00_TIMESTAMP  0xffc02c14   /* CAN Controller 0 Mailbox 0 Timestamp Register */
+#define                    CAN0_MB00_ID0  0xffc02c18   /* CAN Controller 0 Mailbox 0 ID0 Register */
+#define                    CAN0_MB00_ID1  0xffc02c1c   /* CAN Controller 0 Mailbox 0 ID1 Register */
+#define                  CAN0_MB01_DATA0  0xffc02c20   /* CAN Controller 0 Mailbox 1 Data 0 Register */
+#define                  CAN0_MB01_DATA1  0xffc02c24   /* CAN Controller 0 Mailbox 1 Data 1 Register */
+#define                  CAN0_MB01_DATA2  0xffc02c28   /* CAN Controller 0 Mailbox 1 Data 2 Register */
+#define                  CAN0_MB01_DATA3  0xffc02c2c   /* CAN Controller 0 Mailbox 1 Data 3 Register */
+#define                 CAN0_MB01_LENGTH  0xffc02c30   /* CAN Controller 0 Mailbox 1 Length Register */
+#define              CAN0_MB01_TIMESTAMP  0xffc02c34   /* CAN Controller 0 Mailbox 1 Timestamp Register */
+#define                    CAN0_MB01_ID0  0xffc02c38   /* CAN Controller 0 Mailbox 1 ID0 Register */
+#define                    CAN0_MB01_ID1  0xffc02c3c   /* CAN Controller 0 Mailbox 1 ID1 Register */
+#define                  CAN0_MB02_DATA0  0xffc02c40   /* CAN Controller 0 Mailbox 2 Data 0 Register */
+#define                  CAN0_MB02_DATA1  0xffc02c44   /* CAN Controller 0 Mailbox 2 Data 1 Register */
+#define                  CAN0_MB02_DATA2  0xffc02c48   /* CAN Controller 0 Mailbox 2 Data 2 Register */
+#define                  CAN0_MB02_DATA3  0xffc02c4c   /* CAN Controller 0 Mailbox 2 Data 3 Register */
+#define                 CAN0_MB02_LENGTH  0xffc02c50   /* CAN Controller 0 Mailbox 2 Length Register */
+#define              CAN0_MB02_TIMESTAMP  0xffc02c54   /* CAN Controller 0 Mailbox 2 Timestamp Register */
+#define                    CAN0_MB02_ID0  0xffc02c58   /* CAN Controller 0 Mailbox 2 ID0 Register */
+#define                    CAN0_MB02_ID1  0xffc02c5c   /* CAN Controller 0 Mailbox 2 ID1 Register */
+#define                  CAN0_MB03_DATA0  0xffc02c60   /* CAN Controller 0 Mailbox 3 Data 0 Register */
+#define                  CAN0_MB03_DATA1  0xffc02c64   /* CAN Controller 0 Mailbox 3 Data 1 Register */
+#define                  CAN0_MB03_DATA2  0xffc02c68   /* CAN Controller 0 Mailbox 3 Data 2 Register */
+#define                  CAN0_MB03_DATA3  0xffc02c6c   /* CAN Controller 0 Mailbox 3 Data 3 Register */
+#define                 CAN0_MB03_LENGTH  0xffc02c70   /* CAN Controller 0 Mailbox 3 Length Register */
+#define              CAN0_MB03_TIMESTAMP  0xffc02c74   /* CAN Controller 0 Mailbox 3 Timestamp Register */
+#define                    CAN0_MB03_ID0  0xffc02c78   /* CAN Controller 0 Mailbox 3 ID0 Register */
+#define                    CAN0_MB03_ID1  0xffc02c7c   /* CAN Controller 0 Mailbox 3 ID1 Register */
+#define                  CAN0_MB04_DATA0  0xffc02c80   /* CAN Controller 0 Mailbox 4 Data 0 Register */
+#define                  CAN0_MB04_DATA1  0xffc02c84   /* CAN Controller 0 Mailbox 4 Data 1 Register */
+#define                  CAN0_MB04_DATA2  0xffc02c88   /* CAN Controller 0 Mailbox 4 Data 2 Register */
+#define                  CAN0_MB04_DATA3  0xffc02c8c   /* CAN Controller 0 Mailbox 4 Data 3 Register */
+#define                 CAN0_MB04_LENGTH  0xffc02c90   /* CAN Controller 0 Mailbox 4 Length Register */
+#define              CAN0_MB04_TIMESTAMP  0xffc02c94   /* CAN Controller 0 Mailbox 4 Timestamp Register */
+#define                    CAN0_MB04_ID0  0xffc02c98   /* CAN Controller 0 Mailbox 4 ID0 Register */
+#define                    CAN0_MB04_ID1  0xffc02c9c   /* CAN Controller 0 Mailbox 4 ID1 Register */
+#define                  CAN0_MB05_DATA0  0xffc02ca0   /* CAN Controller 0 Mailbox 5 Data 0 Register */
+#define                  CAN0_MB05_DATA1  0xffc02ca4   /* CAN Controller 0 Mailbox 5 Data 1 Register */
+#define                  CAN0_MB05_DATA2  0xffc02ca8   /* CAN Controller 0 Mailbox 5 Data 2 Register */
+#define                  CAN0_MB05_DATA3  0xffc02cac   /* CAN Controller 0 Mailbox 5 Data 3 Register */
+#define                 CAN0_MB05_LENGTH  0xffc02cb0   /* CAN Controller 0 Mailbox 5 Length Register */
+#define              CAN0_MB05_TIMESTAMP  0xffc02cb4   /* CAN Controller 0 Mailbox 5 Timestamp Register */
+#define                    CAN0_MB05_ID0  0xffc02cb8   /* CAN Controller 0 Mailbox 5 ID0 Register */
+#define                    CAN0_MB05_ID1  0xffc02cbc   /* CAN Controller 0 Mailbox 5 ID1 Register */
+#define                  CAN0_MB06_DATA0  0xffc02cc0   /* CAN Controller 0 Mailbox 6 Data 0 Register */
+#define                  CAN0_MB06_DATA1  0xffc02cc4   /* CAN Controller 0 Mailbox 6 Data 1 Register */
+#define                  CAN0_MB06_DATA2  0xffc02cc8   /* CAN Controller 0 Mailbox 6 Data 2 Register */
+#define                  CAN0_MB06_DATA3  0xffc02ccc   /* CAN Controller 0 Mailbox 6 Data 3 Register */
+#define                 CAN0_MB06_LENGTH  0xffc02cd0   /* CAN Controller 0 Mailbox 6 Length Register */
+#define              CAN0_MB06_TIMESTAMP  0xffc02cd4   /* CAN Controller 0 Mailbox 6 Timestamp Register */
+#define                    CAN0_MB06_ID0  0xffc02cd8   /* CAN Controller 0 Mailbox 6 ID0 Register */
+#define                    CAN0_MB06_ID1  0xffc02cdc   /* CAN Controller 0 Mailbox 6 ID1 Register */
+#define                  CAN0_MB07_DATA0  0xffc02ce0   /* CAN Controller 0 Mailbox 7 Data 0 Register */
+#define                  CAN0_MB07_DATA1  0xffc02ce4   /* CAN Controller 0 Mailbox 7 Data 1 Register */
+#define                  CAN0_MB07_DATA2  0xffc02ce8   /* CAN Controller 0 Mailbox 7 Data 2 Register */
+#define                  CAN0_MB07_DATA3  0xffc02cec   /* CAN Controller 0 Mailbox 7 Data 3 Register */
+#define                 CAN0_MB07_LENGTH  0xffc02cf0   /* CAN Controller 0 Mailbox 7 Length Register */
+#define              CAN0_MB07_TIMESTAMP  0xffc02cf4   /* CAN Controller 0 Mailbox 7 Timestamp Register */
+#define                    CAN0_MB07_ID0  0xffc02cf8   /* CAN Controller 0 Mailbox 7 ID0 Register */
+#define                    CAN0_MB07_ID1  0xffc02cfc   /* CAN Controller 0 Mailbox 7 ID1 Register */
+#define                  CAN0_MB08_DATA0  0xffc02d00   /* CAN Controller 0 Mailbox 8 Data 0 Register */
+#define                  CAN0_MB08_DATA1  0xffc02d04   /* CAN Controller 0 Mailbox 8 Data 1 Register */
+#define                  CAN0_MB08_DATA2  0xffc02d08   /* CAN Controller 0 Mailbox 8 Data 2 Register */
+#define                  CAN0_MB08_DATA3  0xffc02d0c   /* CAN Controller 0 Mailbox 8 Data 3 Register */
+#define                 CAN0_MB08_LENGTH  0xffc02d10   /* CAN Controller 0 Mailbox 8 Length Register */
+#define              CAN0_MB08_TIMESTAMP  0xffc02d14   /* CAN Controller 0 Mailbox 8 Timestamp Register */
+#define                    CAN0_MB08_ID0  0xffc02d18   /* CAN Controller 0 Mailbox 8 ID0 Register */
+#define                    CAN0_MB08_ID1  0xffc02d1c   /* CAN Controller 0 Mailbox 8 ID1 Register */
+#define                  CAN0_MB09_DATA0  0xffc02d20   /* CAN Controller 0 Mailbox 9 Data 0 Register */
+#define                  CAN0_MB09_DATA1  0xffc02d24   /* CAN Controller 0 Mailbox 9 Data 1 Register */
+#define                  CAN0_MB09_DATA2  0xffc02d28   /* CAN Controller 0 Mailbox 9 Data 2 Register */
+#define                  CAN0_MB09_DATA3  0xffc02d2c   /* CAN Controller 0 Mailbox 9 Data 3 Register */
+#define                 CAN0_MB09_LENGTH  0xffc02d30   /* CAN Controller 0 Mailbox 9 Length Register */
+#define              CAN0_MB09_TIMESTAMP  0xffc02d34   /* CAN Controller 0 Mailbox 9 Timestamp Register */
+#define                    CAN0_MB09_ID0  0xffc02d38   /* CAN Controller 0 Mailbox 9 ID0 Register */
+#define                    CAN0_MB09_ID1  0xffc02d3c   /* CAN Controller 0 Mailbox 9 ID1 Register */
+#define                  CAN0_MB10_DATA0  0xffc02d40   /* CAN Controller 0 Mailbox 10 Data 0 Register */
+#define                  CAN0_MB10_DATA1  0xffc02d44   /* CAN Controller 0 Mailbox 10 Data 1 Register */
+#define                  CAN0_MB10_DATA2  0xffc02d48   /* CAN Controller 0 Mailbox 10 Data 2 Register */
+#define                  CAN0_MB10_DATA3  0xffc02d4c   /* CAN Controller 0 Mailbox 10 Data 3 Register */
+#define                 CAN0_MB10_LENGTH  0xffc02d50   /* CAN Controller 0 Mailbox 10 Length Register */
+#define              CAN0_MB10_TIMESTAMP  0xffc02d54   /* CAN Controller 0 Mailbox 10 Timestamp Register */
+#define                    CAN0_MB10_ID0  0xffc02d58   /* CAN Controller 0 Mailbox 10 ID0 Register */
+#define                    CAN0_MB10_ID1  0xffc02d5c   /* CAN Controller 0 Mailbox 10 ID1 Register */
+#define                  CAN0_MB11_DATA0  0xffc02d60   /* CAN Controller 0 Mailbox 11 Data 0 Register */
+#define                  CAN0_MB11_DATA1  0xffc02d64   /* CAN Controller 0 Mailbox 11 Data 1 Register */
+#define                  CAN0_MB11_DATA2  0xffc02d68   /* CAN Controller 0 Mailbox 11 Data 2 Register */
+#define                  CAN0_MB11_DATA3  0xffc02d6c   /* CAN Controller 0 Mailbox 11 Data 3 Register */
+#define                 CAN0_MB11_LENGTH  0xffc02d70   /* CAN Controller 0 Mailbox 11 Length Register */
+#define              CAN0_MB11_TIMESTAMP  0xffc02d74   /* CAN Controller 0 Mailbox 11 Timestamp Register */
+#define                    CAN0_MB11_ID0  0xffc02d78   /* CAN Controller 0 Mailbox 11 ID0 Register */
+#define                    CAN0_MB11_ID1  0xffc02d7c   /* CAN Controller 0 Mailbox 11 ID1 Register */
+#define                  CAN0_MB12_DATA0  0xffc02d80   /* CAN Controller 0 Mailbox 12 Data 0 Register */
+#define                  CAN0_MB12_DATA1  0xffc02d84   /* CAN Controller 0 Mailbox 12 Data 1 Register */
+#define                  CAN0_MB12_DATA2  0xffc02d88   /* CAN Controller 0 Mailbox 12 Data 2 Register */
+#define                  CAN0_MB12_DATA3  0xffc02d8c   /* CAN Controller 0 Mailbox 12 Data 3 Register */
+#define                 CAN0_MB12_LENGTH  0xffc02d90   /* CAN Controller 0 Mailbox 12 Length Register */
+#define              CAN0_MB12_TIMESTAMP  0xffc02d94   /* CAN Controller 0 Mailbox 12 Timestamp Register */
+#define                    CAN0_MB12_ID0  0xffc02d98   /* CAN Controller 0 Mailbox 12 ID0 Register */
+#define                    CAN0_MB12_ID1  0xffc02d9c   /* CAN Controller 0 Mailbox 12 ID1 Register */
+#define                  CAN0_MB13_DATA0  0xffc02da0   /* CAN Controller 0 Mailbox 13 Data 0 Register */
+#define                  CAN0_MB13_DATA1  0xffc02da4   /* CAN Controller 0 Mailbox 13 Data 1 Register */
+#define                  CAN0_MB13_DATA2  0xffc02da8   /* CAN Controller 0 Mailbox 13 Data 2 Register */
+#define                  CAN0_MB13_DATA3  0xffc02dac   /* CAN Controller 0 Mailbox 13 Data 3 Register */
+#define                 CAN0_MB13_LENGTH  0xffc02db0   /* CAN Controller 0 Mailbox 13 Length Register */
+#define              CAN0_MB13_TIMESTAMP  0xffc02db4   /* CAN Controller 0 Mailbox 13 Timestamp Register */
+#define                    CAN0_MB13_ID0  0xffc02db8   /* CAN Controller 0 Mailbox 13 ID0 Register */
+#define                    CAN0_MB13_ID1  0xffc02dbc   /* CAN Controller 0 Mailbox 13 ID1 Register */
+#define                  CAN0_MB14_DATA0  0xffc02dc0   /* CAN Controller 0 Mailbox 14 Data 0 Register */
+#define                  CAN0_MB14_DATA1  0xffc02dc4   /* CAN Controller 0 Mailbox 14 Data 1 Register */
+#define                  CAN0_MB14_DATA2  0xffc02dc8   /* CAN Controller 0 Mailbox 14 Data 2 Register */
+#define                  CAN0_MB14_DATA3  0xffc02dcc   /* CAN Controller 0 Mailbox 14 Data 3 Register */
+#define                 CAN0_MB14_LENGTH  0xffc02dd0   /* CAN Controller 0 Mailbox 14 Length Register */
+#define              CAN0_MB14_TIMESTAMP  0xffc02dd4   /* CAN Controller 0 Mailbox 14 Timestamp Register */
+#define                    CAN0_MB14_ID0  0xffc02dd8   /* CAN Controller 0 Mailbox 14 ID0 Register */
+#define                    CAN0_MB14_ID1  0xffc02ddc   /* CAN Controller 0 Mailbox 14 ID1 Register */
+#define                  CAN0_MB15_DATA0  0xffc02de0   /* CAN Controller 0 Mailbox 15 Data 0 Register */
+#define                  CAN0_MB15_DATA1  0xffc02de4   /* CAN Controller 0 Mailbox 15 Data 1 Register */
+#define                  CAN0_MB15_DATA2  0xffc02de8   /* CAN Controller 0 Mailbox 15 Data 2 Register */
+#define                  CAN0_MB15_DATA3  0xffc02dec   /* CAN Controller 0 Mailbox 15 Data 3 Register */
+#define                 CAN0_MB15_LENGTH  0xffc02df0   /* CAN Controller 0 Mailbox 15 Length Register */
+#define              CAN0_MB15_TIMESTAMP  0xffc02df4   /* CAN Controller 0 Mailbox 15 Timestamp Register */
+#define                    CAN0_MB15_ID0  0xffc02df8   /* CAN Controller 0 Mailbox 15 ID0 Register */
+#define                    CAN0_MB15_ID1  0xffc02dfc   /* CAN Controller 0 Mailbox 15 ID1 Register */
+
+/* CAN Controller 0 Mailbox Data Registers */
+
+#define                  CAN0_MB16_DATA0  0xffc02e00   /* CAN Controller 0 Mailbox 16 Data 0 Register */
+#define                  CAN0_MB16_DATA1  0xffc02e04   /* CAN Controller 0 Mailbox 16 Data 1 Register */
+#define                  CAN0_MB16_DATA2  0xffc02e08   /* CAN Controller 0 Mailbox 16 Data 2 Register */
+#define                  CAN0_MB16_DATA3  0xffc02e0c   /* CAN Controller 0 Mailbox 16 Data 3 Register */
+#define                 CAN0_MB16_LENGTH  0xffc02e10   /* CAN Controller 0 Mailbox 16 Length Register */
+#define              CAN0_MB16_TIMESTAMP  0xffc02e14   /* CAN Controller 0 Mailbox 16 Timestamp Register */
+#define                    CAN0_MB16_ID0  0xffc02e18   /* CAN Controller 0 Mailbox 16 ID0 Register */
+#define                    CAN0_MB16_ID1  0xffc02e1c   /* CAN Controller 0 Mailbox 16 ID1 Register */
+#define                  CAN0_MB17_DATA0  0xffc02e20   /* CAN Controller 0 Mailbox 17 Data 0 Register */
+#define                  CAN0_MB17_DATA1  0xffc02e24   /* CAN Controller 0 Mailbox 17 Data 1 Register */
+#define                  CAN0_MB17_DATA2  0xffc02e28   /* CAN Controller 0 Mailbox 17 Data 2 Register */
+#define                  CAN0_MB17_DATA3  0xffc02e2c   /* CAN Controller 0 Mailbox 17 Data 3 Register */
+#define                 CAN0_MB17_LENGTH  0xffc02e30   /* CAN Controller 0 Mailbox 17 Length Register */
+#define              CAN0_MB17_TIMESTAMP  0xffc02e34   /* CAN Controller 0 Mailbox 17 Timestamp Register */
+#define                    CAN0_MB17_ID0  0xffc02e38   /* CAN Controller 0 Mailbox 17 ID0 Register */
+#define                    CAN0_MB17_ID1  0xffc02e3c   /* CAN Controller 0 Mailbox 17 ID1 Register */
+#define                  CAN0_MB18_DATA0  0xffc02e40   /* CAN Controller 0 Mailbox 18 Data 0 Register */
+#define                  CAN0_MB18_DATA1  0xffc02e44   /* CAN Controller 0 Mailbox 18 Data 1 Register */
+#define                  CAN0_MB18_DATA2  0xffc02e48   /* CAN Controller 0 Mailbox 18 Data 2 Register */
+#define                  CAN0_MB18_DATA3  0xffc02e4c   /* CAN Controller 0 Mailbox 18 Data 3 Register */
+#define                 CAN0_MB18_LENGTH  0xffc02e50   /* CAN Controller 0 Mailbox 18 Length Register */
+#define              CAN0_MB18_TIMESTAMP  0xffc02e54   /* CAN Controller 0 Mailbox 18 Timestamp Register */
+#define                    CAN0_MB18_ID0  0xffc02e58   /* CAN Controller 0 Mailbox 18 ID0 Register */
+#define                    CAN0_MB18_ID1  0xffc02e5c   /* CAN Controller 0 Mailbox 18 ID1 Register */
+#define                  CAN0_MB19_DATA0  0xffc02e60   /* CAN Controller 0 Mailbox 19 Data 0 Register */
+#define                  CAN0_MB19_DATA1  0xffc02e64   /* CAN Controller 0 Mailbox 19 Data 1 Register */
+#define                  CAN0_MB19_DATA2  0xffc02e68   /* CAN Controller 0 Mailbox 19 Data 2 Register */
+#define                  CAN0_MB19_DATA3  0xffc02e6c   /* CAN Controller 0 Mailbox 19 Data 3 Register */
+#define                 CAN0_MB19_LENGTH  0xffc02e70   /* CAN Controller 0 Mailbox 19 Length Register */
+#define              CAN0_MB19_TIMESTAMP  0xffc02e74   /* CAN Controller 0 Mailbox 19 Timestamp Register */
+#define                    CAN0_MB19_ID0  0xffc02e78   /* CAN Controller 0 Mailbox 19 ID0 Register */
+#define                    CAN0_MB19_ID1  0xffc02e7c   /* CAN Controller 0 Mailbox 19 ID1 Register */
+#define                  CAN0_MB20_DATA0  0xffc02e80   /* CAN Controller 0 Mailbox 20 Data 0 Register */
+#define                  CAN0_MB20_DATA1  0xffc02e84   /* CAN Controller 0 Mailbox 20 Data 1 Register */
+#define                  CAN0_MB20_DATA2  0xffc02e88   /* CAN Controller 0 Mailbox 20 Data 2 Register */
+#define                  CAN0_MB20_DATA3  0xffc02e8c   /* CAN Controller 0 Mailbox 20 Data 3 Register */
+#define                 CAN0_MB20_LENGTH  0xffc02e90   /* CAN Controller 0 Mailbox 20 Length Register */
+#define              CAN0_MB20_TIMESTAMP  0xffc02e94   /* CAN Controller 0 Mailbox 20 Timestamp Register */
+#define                    CAN0_MB20_ID0  0xffc02e98   /* CAN Controller 0 Mailbox 20 ID0 Register */
+#define                    CAN0_MB20_ID1  0xffc02e9c   /* CAN Controller 0 Mailbox 20 ID1 Register */
+#define                  CAN0_MB21_DATA0  0xffc02ea0   /* CAN Controller 0 Mailbox 21 Data 0 Register */
+#define                  CAN0_MB21_DATA1  0xffc02ea4   /* CAN Controller 0 Mailbox 21 Data 1 Register */
+#define                  CAN0_MB21_DATA2  0xffc02ea8   /* CAN Controller 0 Mailbox 21 Data 2 Register */
+#define                  CAN0_MB21_DATA3  0xffc02eac   /* CAN Controller 0 Mailbox 21 Data 3 Register */
+#define                 CAN0_MB21_LENGTH  0xffc02eb0   /* CAN Controller 0 Mailbox 21 Length Register */
+#define              CAN0_MB21_TIMESTAMP  0xffc02eb4   /* CAN Controller 0 Mailbox 21 Timestamp Register */
+#define                    CAN0_MB21_ID0  0xffc02eb8   /* CAN Controller 0 Mailbox 21 ID0 Register */
+#define                    CAN0_MB21_ID1  0xffc02ebc   /* CAN Controller 0 Mailbox 21 ID1 Register */
+#define                  CAN0_MB22_DATA0  0xffc02ec0   /* CAN Controller 0 Mailbox 22 Data 0 Register */
+#define                  CAN0_MB22_DATA1  0xffc02ec4   /* CAN Controller 0 Mailbox 22 Data 1 Register */
+#define                  CAN0_MB22_DATA2  0xffc02ec8   /* CAN Controller 0 Mailbox 22 Data 2 Register */
+#define                  CAN0_MB22_DATA3  0xffc02ecc   /* CAN Controller 0 Mailbox 22 Data 3 Register */
+#define                 CAN0_MB22_LENGTH  0xffc02ed0   /* CAN Controller 0 Mailbox 22 Length Register */
+#define              CAN0_MB22_TIMESTAMP  0xffc02ed4   /* CAN Controller 0 Mailbox 22 Timestamp Register */
+#define                    CAN0_MB22_ID0  0xffc02ed8   /* CAN Controller 0 Mailbox 22 ID0 Register */
+#define                    CAN0_MB22_ID1  0xffc02edc   /* CAN Controller 0 Mailbox 22 ID1 Register */
+#define                  CAN0_MB23_DATA0  0xffc02ee0   /* CAN Controller 0 Mailbox 23 Data 0 Register */
+#define                  CAN0_MB23_DATA1  0xffc02ee4   /* CAN Controller 0 Mailbox 23 Data 1 Register */
+#define                  CAN0_MB23_DATA2  0xffc02ee8   /* CAN Controller 0 Mailbox 23 Data 2 Register */
+#define                  CAN0_MB23_DATA3  0xffc02eec   /* CAN Controller 0 Mailbox 23 Data 3 Register */
+#define                 CAN0_MB23_LENGTH  0xffc02ef0   /* CAN Controller 0 Mailbox 23 Length Register */
+#define              CAN0_MB23_TIMESTAMP  0xffc02ef4   /* CAN Controller 0 Mailbox 23 Timestamp Register */
+#define                    CAN0_MB23_ID0  0xffc02ef8   /* CAN Controller 0 Mailbox 23 ID0 Register */
+#define                    CAN0_MB23_ID1  0xffc02efc   /* CAN Controller 0 Mailbox 23 ID1 Register */
+#define                  CAN0_MB24_DATA0  0xffc02f00   /* CAN Controller 0 Mailbox 24 Data 0 Register */
+#define                  CAN0_MB24_DATA1  0xffc02f04   /* CAN Controller 0 Mailbox 24 Data 1 Register */
+#define                  CAN0_MB24_DATA2  0xffc02f08   /* CAN Controller 0 Mailbox 24 Data 2 Register */
+#define                  CAN0_MB24_DATA3  0xffc02f0c   /* CAN Controller 0 Mailbox 24 Data 3 Register */
+#define                 CAN0_MB24_LENGTH  0xffc02f10   /* CAN Controller 0 Mailbox 24 Length Register */
+#define              CAN0_MB24_TIMESTAMP  0xffc02f14   /* CAN Controller 0 Mailbox 24 Timestamp Register */
+#define                    CAN0_MB24_ID0  0xffc02f18   /* CAN Controller 0 Mailbox 24 ID0 Register */
+#define                    CAN0_MB24_ID1  0xffc02f1c   /* CAN Controller 0 Mailbox 24 ID1 Register */
+#define                  CAN0_MB25_DATA0  0xffc02f20   /* CAN Controller 0 Mailbox 25 Data 0 Register */
+#define                  CAN0_MB25_DATA1  0xffc02f24   /* CAN Controller 0 Mailbox 25 Data 1 Register */
+#define                  CAN0_MB25_DATA2  0xffc02f28   /* CAN Controller 0 Mailbox 25 Data 2 Register */
+#define                  CAN0_MB25_DATA3  0xffc02f2c   /* CAN Controller 0 Mailbox 25 Data 3 Register */
+#define                 CAN0_MB25_LENGTH  0xffc02f30   /* CAN Controller 0 Mailbox 25 Length Register */
+#define              CAN0_MB25_TIMESTAMP  0xffc02f34   /* CAN Controller 0 Mailbox 25 Timestamp Register */
+#define                    CAN0_MB25_ID0  0xffc02f38   /* CAN Controller 0 Mailbox 25 ID0 Register */
+#define                    CAN0_MB25_ID1  0xffc02f3c   /* CAN Controller 0 Mailbox 25 ID1 Register */
+#define                  CAN0_MB26_DATA0  0xffc02f40   /* CAN Controller 0 Mailbox 26 Data 0 Register */
+#define                  CAN0_MB26_DATA1  0xffc02f44   /* CAN Controller 0 Mailbox 26 Data 1 Register */
+#define                  CAN0_MB26_DATA2  0xffc02f48   /* CAN Controller 0 Mailbox 26 Data 2 Register */
+#define                  CAN0_MB26_DATA3  0xffc02f4c   /* CAN Controller 0 Mailbox 26 Data 3 Register */
+#define                 CAN0_MB26_LENGTH  0xffc02f50   /* CAN Controller 0 Mailbox 26 Length Register */
+#define              CAN0_MB26_TIMESTAMP  0xffc02f54   /* CAN Controller 0 Mailbox 26 Timestamp Register */
+#define                    CAN0_MB26_ID0  0xffc02f58   /* CAN Controller 0 Mailbox 26 ID0 Register */
+#define                    CAN0_MB26_ID1  0xffc02f5c   /* CAN Controller 0 Mailbox 26 ID1 Register */
+#define                  CAN0_MB27_DATA0  0xffc02f60   /* CAN Controller 0 Mailbox 27 Data 0 Register */
+#define                  CAN0_MB27_DATA1  0xffc02f64   /* CAN Controller 0 Mailbox 27 Data 1 Register */
+#define                  CAN0_MB27_DATA2  0xffc02f68   /* CAN Controller 0 Mailbox 27 Data 2 Register */
+#define                  CAN0_MB27_DATA3  0xffc02f6c   /* CAN Controller 0 Mailbox 27 Data 3 Register */
+#define                 CAN0_MB27_LENGTH  0xffc02f70   /* CAN Controller 0 Mailbox 27 Length Register */
+#define              CAN0_MB27_TIMESTAMP  0xffc02f74   /* CAN Controller 0 Mailbox 27 Timestamp Register */
+#define                    CAN0_MB27_ID0  0xffc02f78   /* CAN Controller 0 Mailbox 27 ID0 Register */
+#define                    CAN0_MB27_ID1  0xffc02f7c   /* CAN Controller 0 Mailbox 27 ID1 Register */
+#define                  CAN0_MB28_DATA0  0xffc02f80   /* CAN Controller 0 Mailbox 28 Data 0 Register */
+#define                  CAN0_MB28_DATA1  0xffc02f84   /* CAN Controller 0 Mailbox 28 Data 1 Register */
+#define                  CAN0_MB28_DATA2  0xffc02f88   /* CAN Controller 0 Mailbox 28 Data 2 Register */
+#define                  CAN0_MB28_DATA3  0xffc02f8c   /* CAN Controller 0 Mailbox 28 Data 3 Register */
+#define                 CAN0_MB28_LENGTH  0xffc02f90   /* CAN Controller 0 Mailbox 28 Length Register */
+#define              CAN0_MB28_TIMESTAMP  0xffc02f94   /* CAN Controller 0 Mailbox 28 Timestamp Register */
+#define                    CAN0_MB28_ID0  0xffc02f98   /* CAN Controller 0 Mailbox 28 ID0 Register */
+#define                    CAN0_MB28_ID1  0xffc02f9c   /* CAN Controller 0 Mailbox 28 ID1 Register */
+#define                  CAN0_MB29_DATA0  0xffc02fa0   /* CAN Controller 0 Mailbox 29 Data 0 Register */
+#define                  CAN0_MB29_DATA1  0xffc02fa4   /* CAN Controller 0 Mailbox 29 Data 1 Register */
+#define                  CAN0_MB29_DATA2  0xffc02fa8   /* CAN Controller 0 Mailbox 29 Data 2 Register */
+#define                  CAN0_MB29_DATA3  0xffc02fac   /* CAN Controller 0 Mailbox 29 Data 3 Register */
+#define                 CAN0_MB29_LENGTH  0xffc02fb0   /* CAN Controller 0 Mailbox 29 Length Register */
+#define              CAN0_MB29_TIMESTAMP  0xffc02fb4   /* CAN Controller 0 Mailbox 29 Timestamp Register */
+#define                    CAN0_MB29_ID0  0xffc02fb8   /* CAN Controller 0 Mailbox 29 ID0 Register */
+#define                    CAN0_MB29_ID1  0xffc02fbc   /* CAN Controller 0 Mailbox 29 ID1 Register */
+#define                  CAN0_MB30_DATA0  0xffc02fc0   /* CAN Controller 0 Mailbox 30 Data 0 Register */
+#define                  CAN0_MB30_DATA1  0xffc02fc4   /* CAN Controller 0 Mailbox 30 Data 1 Register */
+#define                  CAN0_MB30_DATA2  0xffc02fc8   /* CAN Controller 0 Mailbox 30 Data 2 Register */
+#define                  CAN0_MB30_DATA3  0xffc02fcc   /* CAN Controller 0 Mailbox 30 Data 3 Register */
+#define                 CAN0_MB30_LENGTH  0xffc02fd0   /* CAN Controller 0 Mailbox 30 Length Register */
+#define              CAN0_MB30_TIMESTAMP  0xffc02fd4   /* CAN Controller 0 Mailbox 30 Timestamp Register */
+#define                    CAN0_MB30_ID0  0xffc02fd8   /* CAN Controller 0 Mailbox 30 ID0 Register */
+#define                    CAN0_MB30_ID1  0xffc02fdc   /* CAN Controller 0 Mailbox 30 ID1 Register */
+#define                  CAN0_MB31_DATA0  0xffc02fe0   /* CAN Controller 0 Mailbox 31 Data 0 Register */
+#define                  CAN0_MB31_DATA1  0xffc02fe4   /* CAN Controller 0 Mailbox 31 Data 1 Register */
+#define                  CAN0_MB31_DATA2  0xffc02fe8   /* CAN Controller 0 Mailbox 31 Data 2 Register */
+#define                  CAN0_MB31_DATA3  0xffc02fec   /* CAN Controller 0 Mailbox 31 Data 3 Register */
+#define                 CAN0_MB31_LENGTH  0xffc02ff0   /* CAN Controller 0 Mailbox 31 Length Register */
+#define              CAN0_MB31_TIMESTAMP  0xffc02ff4   /* CAN Controller 0 Mailbox 31 Timestamp Register */
+#define                    CAN0_MB31_ID0  0xffc02ff8   /* CAN Controller 0 Mailbox 31 ID0 Register */
+#define                    CAN0_MB31_ID1  0xffc02ffc   /* CAN Controller 0 Mailbox 31 ID1 Register */
+
+/* UART3 Registers */
+
+#define                        UART3_DLL  0xffc03100   /* Divisor Latch Low Byte */
+#define                        UART3_DLH  0xffc03104   /* Divisor Latch High Byte */
+#define                       UART3_GCTL  0xffc03108   /* Global Control Register */
+#define                        UART3_LCR  0xffc0310c   /* Line Control Register */
+#define                        UART3_MCR  0xffc03110   /* Modem Control Register */
+#define                        UART3_LSR  0xffc03114   /* Line Status Register */
+#define                        UART3_MSR  0xffc03118   /* Modem Status Register */
+#define                        UART3_SCR  0xffc0311c   /* Scratch Register */
+#define                    UART3_IER_SET  0xffc03120   /* Interrupt Enable Register Set */
+#define                  UART3_IER_CLEAR  0xffc03124   /* Interrupt Enable Register Clear */
+#define                        UART3_THR  0xffc03128   /* Transmit Hold Register */
+#define                        UART3_RBR  0xffc0312c   /* Receive Buffer Register */
+
+/* NFC Registers */
+
+#define                          NFC_CTL  0xffc03b00   /* NAND Control Register */
+#define                         NFC_STAT  0xffc03b04   /* NAND Status Register */
+#define                      NFC_IRQSTAT  0xffc03b08   /* NAND Interrupt Status Register */
+#define                      NFC_IRQMASK  0xffc03b0c   /* NAND Interrupt Mask Register */
+#define                         NFC_ECC0  0xffc03b10   /* NAND ECC Register 0 */
+#define                         NFC_ECC1  0xffc03b14   /* NAND ECC Register 1 */
+#define                         NFC_ECC2  0xffc03b18   /* NAND ECC Register 2 */
+#define                         NFC_ECC3  0xffc03b1c   /* NAND ECC Register 3 */
+#define                        NFC_COUNT  0xffc03b20   /* NAND ECC Count Register */
+#define                          NFC_RST  0xffc03b24   /* NAND ECC Reset Register */
+#define                        NFC_PGCTL  0xffc03b28   /* NAND Page Control Register */
+#define                         NFC_READ  0xffc03b2c   /* NAND Read Data Register */
+#define                         NFC_ADDR  0xffc03b40   /* NAND Address Register */
+#define                          NFC_CMD  0xffc03b44   /* NAND Command Register */
+#define                      NFC_DATA_WR  0xffc03b48   /* NAND Data Write Register */
+#define                      NFC_DATA_RD  0xffc03b4c   /* NAND Data Read Register */
+
+/* Counter Registers */
+
+#define                       CNT_CONFIG  0xffc04200   /* Configuration Register */
+#define                        CNT_IMASK  0xffc04204   /* Interrupt Mask Register */
+#define                       CNT_STATUS  0xffc04208   /* Status Register */
+#define                      CNT_COMMAND  0xffc0420c   /* Command Register */
+#define                     CNT_DEBOUNCE  0xffc04210   /* Debounce Register */
+#define                      CNT_COUNTER  0xffc04214   /* Counter Register */
+#define                          CNT_MAX  0xffc04218   /* Maximal Count Register */
+#define                          CNT_MIN  0xffc0421c   /* Minimal Count Register */
+
+/* OTP/FUSE Registers */
+
+#define                      OTP_CONTROL  0xffc04300   /* OTP/Fuse Control Register */
+#define                          OTP_BEN  0xffc04304   /* OTP/Fuse Byte Enable */
+#define                       OTP_STATUS  0xffc04308   /* OTP/Fuse Status */
+#define                       OTP_TIMING  0xffc0430c   /* OTP/Fuse Access Timing */
+
+/* Security Registers */
+
+#define                    SECURE_SYSSWT  0xffc04320   /* Secure System Switches */
+#define                   SECURE_CONTROL  0xffc04324   /* Secure Control */
+#define                    SECURE_STATUS  0xffc04328   /* Secure Status */
+
+/* DMA Peripheral Mux Register */
+
+#define                    DMAC1_PERIMUX  0xffc04340   /* DMA Controller 1 Peripheral Multiplexer Register */
+
+/* OTP Read/Write Data Buffer Registers */
+
+#define                        OTP_DATA0  0xffc04380   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define                        OTP_DATA1  0xffc04384   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define                        OTP_DATA2  0xffc04388   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define                        OTP_DATA3  0xffc0438c   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+
+/* Handshake MDMA is not defined in the shared file because it is not available on the ADSP-BF542 processor */
+
+/* ********************************************************** */
+/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
+/*     and MULTI BIT READ MACROS                              */
+/* ********************************************************** */
+
+/* SIC_IMASK Masks */
+#define SIC_UNMASK_ALL         0x00000000	/* Unmask all peripheral interrupts */
+#define SIC_MASK_ALL           0xFFFFFFFF	/* Mask all peripheral interrupts */
+#define SIC_MASK(x)	       (1 << (x))	/* Mask Peripheral #x interrupt */
+#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x)))	/* Unmask Peripheral #x interrupt */
+
+/* SIC_IWR Masks */
+#define IWR_DISABLE_ALL        0x00000000	/* Wakeup Disable all peripherals */
+#define IWR_ENABLE_ALL         0xFFFFFFFF	/* Wakeup Enable all peripherals */
+#define IWR_ENABLE(x)	       (1 << (x))	/* Wakeup Enable Peripheral #x */
+#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x)))	/* Wakeup Disable Peripheral #x */
+
+/* Bit masks for SIC_IAR0 */
+
+#define            PLL_WAKEUP  0x1        /* PLL Wakeup */
+
+/* Bit masks for SIC_IWR0, SIC_IMASK0, SIC_ISR0 */
+
+#define              DMA0_ERR  0x2        /* DMA Controller 0 Error */
+#define             EPPI0_ERR  0x4        /* EPPI0 Error */
+#define            SPORT0_ERR  0x8        /* SPORT0 Error */
+#define            SPORT1_ERR  0x10       /* SPORT1 Error */
+#define              SPI0_ERR  0x20       /* SPI0 Error */
+#define             UART0_ERR  0x40       /* UART0 Error */
+#define                   RTC  0x80       /* Real-Time Clock */
+#define                 DMA12  0x100      /* DMA Channel 12 */
+#define                  DMA0  0x200      /* DMA Channel 0 */
+#define                  DMA1  0x400      /* DMA Channel 1 */
+#define                  DMA2  0x800      /* DMA Channel 2 */
+#define                  DMA3  0x1000     /* DMA Channel 3 */
+#define                  DMA4  0x2000     /* DMA Channel 4 */
+#define                  DMA6  0x4000     /* DMA Channel 6 */
+#define                  DMA7  0x8000     /* DMA Channel 7 */
+#define                 PINT0  0x80000    /* Pin Interrupt 0 */
+#define                 PINT1  0x100000   /* Pin Interrupt 1 */
+#define                 MDMA0  0x200000   /* Memory DMA Stream 0 */
+#define                 MDMA1  0x400000   /* Memory DMA Stream 1 */
+#define                  WDOG  0x800000   /* Watchdog Timer */
+#define              DMA1_ERR  0x1000000  /* DMA Controller 1 Error */
+#define            SPORT2_ERR  0x2000000  /* SPORT2 Error */
+#define            SPORT3_ERR  0x4000000  /* SPORT3 Error */
+#define               MXVR_SD  0x8000000  /* MXVR Synchronous Data */
+#define              SPI1_ERR  0x10000000 /* SPI1 Error */
+#define              SPI2_ERR  0x20000000 /* SPI2 Error */
+#define             UART1_ERR  0x40000000 /* UART1 Error */
+#define             UART2_ERR  0x80000000 /* UART2 Error */
+
+/* Bit masks for SIC_IWR1, SIC_IMASK1, SIC_ISR1 */
+
+#define              CAN0_ERR  0x1        /* CAN0 Error */
+#define                 DMA18  0x2        /* DMA Channel 18 */
+#define                 DMA19  0x4        /* DMA Channel 19 */
+#define                 DMA20  0x8        /* DMA Channel 20 */
+#define                 DMA21  0x10       /* DMA Channel 21 */
+#define                 DMA13  0x20       /* DMA Channel 13 */
+#define                 DMA14  0x40       /* DMA Channel 14 */
+#define                  DMA5  0x80       /* DMA Channel 5 */
+#define                 DMA23  0x100      /* DMA Channel 23 */
+#define                  DMA8  0x200      /* DMA Channel 8 */
+#define                  DMA9  0x400      /* DMA Channel 9 */
+#define                 DMA10  0x800      /* DMA Channel 10 */
+#define                 DMA11  0x1000     /* DMA Channel 11 */
+#define                  TWI0  0x2000     /* TWI0 */
+#define                  TWI1  0x4000     /* TWI1 */
+#define               CAN0_RX  0x8000     /* CAN0 Receive */
+#define               CAN0_TX  0x10000    /* CAN0 Transmit */
+#define                 MDMA2  0x20000    /* Memory DMA Stream 0 */
+#define                 MDMA3  0x40000    /* Memory DMA Stream 1 */
+#define             MXVR_STAT  0x80000    /* MXVR Status */
+#define               MXVR_CM  0x100000   /* MXVR Control Message */
+#define               MXVR_AP  0x200000   /* MXVR Asynchronous Packet */
+#define             EPPI1_ERR  0x400000   /* EPPI1 Error */
+#define             EPPI2_ERR  0x800000   /* EPPI2 Error */
+#define             UART3_ERR  0x1000000  /* UART3 Error */
+#define              HOST_ERR  0x2000000  /* Host DMA Port Error */
+#define               USB_ERR  0x4000000  /* USB Error */
+#define              PIXC_ERR  0x8000000  /* Pixel Compositor Error */
+#define               NFC_ERR  0x10000000 /* Nand Flash Controller Error */
+#define             ATAPI_ERR  0x20000000 /* ATAPI Error */
+#define              CAN1_ERR  0x40000000 /* CAN1 Error */
+#define             DMAR0_ERR  0x80000000 /* DMAR0 Overflow Error */
+#define             DMAR1_ERR  0x80000000 /* DMAR1 Overflow Error */
+#define                 DMAR0  0x80000000 /* DMAR0 Block */
+#define                 DMAR1  0x80000000 /* DMAR1 Block */
+
+/* Bit masks for SIC_IWR2, SIC_IMASK2, SIC_ISR2 */
+
+#define                 DMA15  0x1        /* DMA Channel 15 */
+#define                 DMA16  0x2        /* DMA Channel 16 */
+#define                 DMA17  0x4        /* DMA Channel 17 */
+#define                 DMA22  0x8        /* DMA Channel 22 */
+#define                   CNT  0x10       /* Counter */
+#define                   KEY  0x20       /* Keypad */
+#define               CAN1_RX  0x40       /* CAN1 Receive */
+#define               CAN1_TX  0x80       /* CAN1 Transmit */
+#define             SDH_INT_MASK0  0x100      /* SDH Mask 0 */
+#define             SDH_INT_MASK1  0x200      /* SDH Mask 1 */
+#define              USB_EINT  0x400      /* USB Exception */
+#define              USB_INT0  0x800      /* USB Interrupt 0 */
+#define              USB_INT1  0x1000     /* USB Interrupt 1 */
+#define              USB_INT2  0x2000     /* USB Interrupt 2 */
+#define            USB_DMAINT  0x4000     /* USB DMA */
+#define                OTPSEC  0x8000     /* OTP Access Complete */
+#define                TIMER0  0x400000   /* Timer 0 */
+#define                TIMER1  0x800000   /* Timer 1 */
+#define                TIMER2  0x1000000  /* Timer 2 */
+#define                TIMER3  0x2000000  /* Timer 3 */
+#define                TIMER4  0x4000000  /* Timer 4 */
+#define                TIMER5  0x8000000  /* Timer 5 */
+#define                TIMER6  0x10000000 /* Timer 6 */
+#define                TIMER7  0x20000000 /* Timer 7 */
+#define                 PINT2  0x40000000 /* Pin Interrupt 2 */
+#define                 PINT3  0x80000000 /* Pin Interrupt 3 */
+
+/* Bit masks for DMAx_PERIPHERAL_MAP, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
+
+#define                     CTYPE  0x40       /* DMA Channel Type */
+#define                      PMAP  0xf000     /* Peripheral Mapped To This Channel */
+
+/* Bit masks for DMACx_TC_PER */
+
+#define        DCB_TRAFFIC_PERIOD  0xf        /* DCB Traffic Control Period */
+#define        DEB_TRAFFIC_PERIOD  0xf0       /* DEB Traffic Control Period */
+#define        DAB_TRAFFIC_PERIOD  0x700      /* DAB Traffic Control Period */
+#define   MDMA_ROUND_ROBIN_PERIOD  0xf800     /* MDMA Round Robin Period */
+
+/* Bit masks for DMACx_TC_CNT */
+
+#define         DCB_TRAFFIC_COUNT  0xf        /* DCB Traffic Control Count */
+#define         DEB_TRAFFIC_COUNT  0xf0       /* DEB Traffic Control Count */
+#define         DAB_TRAFFIC_COUNT  0x700      /* DAB Traffic Control Count */
+#define    MDMA_ROUND_ROBIN_COUNT  0xf800     /* MDMA Round Robin Count */
+
+/* Bit masks for DMAC1_PERIMUX */
+
+#define                   PMUXSDH  0x1        /* Peripheral Select for DMA22 channel */
+
+/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  *************************/
+/* EBIU_AMGCTL Masks																	*/
+#define AMCKEN			0x0001		/* Enable CLKOUT									*/
+#define	AMBEN_NONE		0x0000		/* All Banks Disabled								*/
+#define AMBEN_B0		0x0002		/* Enable Async Memory Bank 0 only					*/
+#define AMBEN_B0_B1		0x0004		/* Enable Async Memory Banks 0 & 1 only				*/
+#define AMBEN_B0_B1_B2	0x0006		/* Enable Async Memory Banks 0, 1, and 2			*/
+#define AMBEN_ALL		0x0008		/* Enable Async Memory Banks (all) 0, 1, 2, and 3	*/
+
+
+/* Bit masks for EBIU_AMBCTL0 */
+
+#define                   B0RDYEN  0x1        /* Bank 0 ARDY Enable */
+#define                  B0RDYPOL  0x2        /* Bank 0 ARDY Polarity */
+#define                      B0TT  0xc        /* Bank 0 transition time */
+#define                      B0ST  0x30       /* Bank 0 Setup time */
+#define                      B0HT  0xc0       /* Bank 0 Hold time */
+#define                     B0RAT  0xf00      /* Bank 0 Read access time */
+#define                     B0WAT  0xf000     /* Bank 0 write access time */
+#define                   B1RDYEN  0x10000    /* Bank 1 ARDY Enable */
+#define                  B1RDYPOL  0x20000    /* Bank 1 ARDY Polarity */
+#define                      B1TT  0xc0000    /* Bank 1 transition time */
+#define                      B1ST  0x300000   /* Bank 1 Setup time */
+#define                      B1HT  0xc00000   /* Bank 1 Hold time */
+#define                     B1RAT  0xf000000  /* Bank 1 Read access time */
+#define                     B1WAT  0xf0000000 /* Bank 1 write access time */
+
+/* Bit masks for EBIU_AMBCTL1 */
+
+#define                   B2RDYEN  0x1        /* Bank 2 ARDY Enable */
+#define                  B2RDYPOL  0x2        /* Bank 2 ARDY Polarity */
+#define                      B2TT  0xc        /* Bank 2 transition time */
+#define                      B2ST  0x30       /* Bank 2 Setup time */
+#define                      B2HT  0xc0       /* Bank 2 Hold time */
+#define                     B2RAT  0xf00      /* Bank 2 Read access time */
+#define                     B2WAT  0xf000     /* Bank 2 write access time */
+#define                   B3RDYEN  0x10000    /* Bank 3 ARDY Enable */
+#define                  B3RDYPOL  0x20000    /* Bank 3 ARDY Polarity */
+#define                      B3TT  0xc0000    /* Bank 3 transition time */
+#define                      B3ST  0x300000   /* Bank 3 Setup time */
+#define                      B3HT  0xc00000   /* Bank 3 Hold time */
+#define                     B3RAT  0xf000000  /* Bank 3 Read access time */
+#define                     B3WAT  0xf0000000 /* Bank 3 write access time */
+
+/* Bit masks for EBIU_MBSCTL */
+
+#define                  AMSB0CTL  0x3        /* Async Memory Bank 0 select */
+#define                  AMSB1CTL  0xc        /* Async Memory Bank 1 select */
+#define                  AMSB2CTL  0x30       /* Async Memory Bank 2 select */
+#define                  AMSB3CTL  0xc0       /* Async Memory Bank 3 select */
+
+/* Bit masks for EBIU_MODE */
+
+#define                    B0MODE  0x3        /* Async Memory Bank 0 Access Mode */
+#define                    B1MODE  0xc        /* Async Memory Bank 1 Access Mode */
+#define                    B2MODE  0x30       /* Async Memory Bank 2 Access Mode */
+#define                    B3MODE  0xc0       /* Async Memory Bank 3 Access Mode */
+
+/* Bit masks for EBIU_FCTL */
+
+#define               TESTSETLOCK  0x1        /* Test set lock */
+#define                      BCLK  0x6        /* Burst clock frequency */
+#define                      PGWS  0x38       /* Page wait states */
+#define                      PGSZ  0x40       /* Page size */
+#define                      RDDL  0x380      /* Read data delay */
+
+/* Bit masks for EBIU_ARBSTAT */
+
+#define                   ARBSTAT  0x1        /* Arbitration status */
+#define                    BGSTAT  0x2        /* Bus grant status */
+
+/* Bit masks for EBIU_DDRCTL0 */
+
+#define                     TREFI  0x3fff     /* Refresh Interval */
+#define                      TRFC  0x3c000    /* Auto-refresh command period */
+#define                       TRP  0x3c0000   /* Pre charge-to-active command period */
+#define                      TRAS  0x3c00000  /* Min Active-to-pre charge time */
+#define                       TRC  0x3c000000 /* Active-to-active time */
+#define DDR_TRAS(x)		((x<<22)&TRAS)	/* DDR tRAS = (1~15) cycles */
+#define DDR_TRP(x)		((x<<18)&TRP)	/* DDR tRP = (1~15) cycles */
+#define DDR_TRC(x)		((x<<26)&TRC)	/* DDR tRC = (1~15) cycles */
+#define DDR_TRFC(x)		((x<<14)&TRFC)	/* DDR tRFC = (1~15) cycles */
+#define DDR_TREFI(x)		(x&TREFI)	/* DDR tRFC = (1~15) cycles */
+
+/* Bit masks for EBIU_DDRCTL1 */
+
+#define                      TRCD  0xf        /* Active-to-Read/write delay */
+#define                      TMRD  0xf0       /* Mode register set to active */
+#define                       TWR  0x300      /* Write Recovery time */
+#define               DDRDATWIDTH  0x3000     /* DDR data width */
+#define                  EXTBANKS  0xc000     /* External banks */
+#define               DDRDEVWIDTH  0x30000    /* DDR device width */
+#define                DDRDEVSIZE  0xc0000    /* DDR device size */
+#define                      TWTR  0xf0000000 /* Write-to-read delay */
+#define DDR_TWTR(x)		((x<<28)&TWTR)	/* DDR tWTR = (1~15) cycles */
+#define DDR_TMRD(x)		((x<<4)&TMRD)	/* DDR tMRD = (1~15) cycles */
+#define DDR_TWR(x)		((x<<8)&TWR)	/* DDR tWR = (1~15) cycles */
+#define DDR_TRCD(x)		(x&TRCD)	/* DDR tRCD = (1~15) cycles */
+#define DDR_DATWIDTH		0x2000		/* DDR data width */
+#define EXTBANK_1		0		/* 1 external bank */
+#define EXTBANK_2		0x4000		/* 2 external banks */
+#define DEVSZ_64		0x40000		/* DDR External Bank Size = 64MB */
+#define DEVSZ_128		0x80000		/* DDR External Bank Size = 128MB */
+#define DEVSZ_256		0xc0000		/* DDR External Bank Size = 256MB */
+#define DEVSZ_512		0		/* DDR External Bank Size = 512MB */
+#define DEVWD_4			0		/* DDR Device Width = 4 Bits    */
+#define DEVWD_8			0x10000		/* DDR Device Width = 8 Bits    */
+#define DEVWD_16		0x20000		/* DDR Device Width = 16 Bits    */
+
+/* Bit masks for EBIU_DDRCTL2 */
+
+#define               BURSTLENGTH  0x7        /* Burst length */
+#define                CASLATENCY  0x70       /* CAS latency */
+#define                  DLLRESET  0x100      /* DLL Reset */
+#define                      REGE  0x1000     /* Register mode enable */
+#define CL_1_5			0x50		/* DDR CAS Latency = 1.5 cycles */
+#define CL_2			0x20		/* DDR CAS Latency = 2 cycles */
+#define CL_2_5			0x60		/* DDR CAS Latency = 2.5 cycles */
+#define CL_3			0x30		/* DDR CAS Latency = 3 cycles */
+
+/* Bit masks for EBIU_DDRCTL3 */
+
+#define                      PASR  0x7        /* Partial array self-refresh */
+
+/* Bit masks for EBIU_DDRQUE */
+
+#define                DEB1_PFLEN  0x3        /* Pre fetch length for DEB1 accesses */
+#define                DEB2_PFLEN  0xc        /* Pre fetch length for DEB2 accesses */
+#define                DEB3_PFLEN  0x30       /* Pre fetch length for DEB3 accesses */
+#define          DEB_ARB_PRIORITY  0x700      /* Arbitration between DEB busses */
+#define               DEB1_URGENT  0x1000     /* DEB1 Urgent */
+#define               DEB2_URGENT  0x2000     /* DEB2 Urgent */
+#define               DEB3_URGENT  0x4000     /* DEB3 Urgent */
+
+/* Bit masks for EBIU_ERRMST */
+
+#define                DEB1_ERROR  0x1        /* DEB1 Error */
+#define                DEB2_ERROR  0x2        /* DEB2 Error */
+#define                DEB3_ERROR  0x4        /* DEB3 Error */
+#define                CORE_ERROR  0x8        /* Core error */
+#define                DEB_MERROR  0x10       /* DEB1 Error (2nd) */
+#define               DEB2_MERROR  0x20       /* DEB2 Error (2nd) */
+#define               DEB3_MERROR  0x40       /* DEB3 Error (2nd) */
+#define               CORE_MERROR  0x80       /* Core Error (2nd) */
+
+/* Bit masks for EBIU_RSTCTL */
+
+#define                 DDRSRESET  0x1        /* DDR soft reset */
+#define               PFTCHSRESET  0x4        /* DDR prefetch reset */
+#define                     SRREQ  0x8        /* Self-refresh request */
+#define                     SRACK  0x10       /* Self-refresh acknowledge */
+#define                MDDRENABLE  0x20       /* Mobile DDR enable */
+
+/* Bit masks for EBIU_DDRMCEN */
+
+#define                B0WCENABLE  0x1        /* Bank 0 write count enable */
+#define                B1WCENABLE  0x2        /* Bank 1 write count enable */
+#define                B2WCENABLE  0x4        /* Bank 2 write count enable */
+#define                B3WCENABLE  0x8        /* Bank 3 write count enable */
+#define                B4WCENABLE  0x10       /* Bank 4 write count enable */
+#define                B5WCENABLE  0x20       /* Bank 5 write count enable */
+#define                B6WCENABLE  0x40       /* Bank 6 write count enable */
+#define                B7WCENABLE  0x80       /* Bank 7 write count enable */
+#define                B0RCENABLE  0x100      /* Bank 0 read count enable */
+#define                B1RCENABLE  0x200      /* Bank 1 read count enable */
+#define                B2RCENABLE  0x400      /* Bank 2 read count enable */
+#define                B3RCENABLE  0x800      /* Bank 3 read count enable */
+#define                B4RCENABLE  0x1000     /* Bank 4 read count enable */
+#define                B5RCENABLE  0x2000     /* Bank 5 read count enable */
+#define                B6RCENABLE  0x4000     /* Bank 6 read count enable */
+#define                B7RCENABLE  0x8000     /* Bank 7 read count enable */
+#define             ROWACTCENABLE  0x10000    /* DDR Row activate count enable */
+#define                RWTCENABLE  0x20000    /* DDR R/W Turn around count enable */
+#define                 ARCENABLE  0x40000    /* DDR Auto-refresh count enable */
+#define                 GC0ENABLE  0x100000   /* DDR Grant count 0 enable */
+#define                 GC1ENABLE  0x200000   /* DDR Grant count 1 enable */
+#define                 GC2ENABLE  0x400000   /* DDR Grant count 2 enable */
+#define                 GC3ENABLE  0x800000   /* DDR Grant count 3 enable */
+#define                 GCCONTROL  0x3000000  /* DDR Grant Count Control */
+
+/* Bit masks for EBIU_DDRMCCL */
+
+#define                 CB0WCOUNT  0x1        /* Clear write count 0 */
+#define                 CB1WCOUNT  0x2        /* Clear write count 1 */
+#define                 CB2WCOUNT  0x4        /* Clear write count 2 */
+#define                 CB3WCOUNT  0x8        /* Clear write count 3 */
+#define                 CB4WCOUNT  0x10       /* Clear write count 4 */
+#define                 CB5WCOUNT  0x20       /* Clear write count 5 */
+#define                 CB6WCOUNT  0x40       /* Clear write count 6 */
+#define                 CB7WCOUNT  0x80       /* Clear write count 7 */
+#define                  CBRCOUNT  0x100      /* Clear read count 0 */
+#define                 CB1RCOUNT  0x200      /* Clear read count 1 */
+#define                 CB2RCOUNT  0x400      /* Clear read count 2 */
+#define                 CB3RCOUNT  0x800      /* Clear read count 3 */
+#define                 CB4RCOUNT  0x1000     /* Clear read count 4 */
+#define                 CB5RCOUNT  0x2000     /* Clear read count 5 */
+#define                 CB6RCOUNT  0x4000     /* Clear read count 6 */
+#define                 CB7RCOUNT  0x8000     /* Clear read count 7 */
+#define                  CRACOUNT  0x10000    /* Clear row activation count */
+#define                CRWTACOUNT  0x20000    /* Clear R/W turn-around count */
+#define                  CARCOUNT  0x40000    /* Clear auto-refresh count */
+#define                  CG0COUNT  0x100000   /* Clear grant count 0 */
+#define                  CG1COUNT  0x200000   /* Clear grant count 1 */
+#define                  CG2COUNT  0x400000   /* Clear grant count 2 */
+#define                  CG3COUNT  0x800000   /* Clear grant count 3 */
+
+/* Bit masks for (PORTx is PORTA - PORTJ) includes PORTx_FER, PORTx_SET, PORTx_CLEAR, PORTx_DIR_SET, PORTx_DIR_CLEAR, PORTx_INEN */
+
+#define                       Px0  0x1        /* GPIO 0 */
+#define                       Px1  0x2        /* GPIO 1 */
+#define                       Px2  0x4        /* GPIO 2 */
+#define                       Px3  0x8        /* GPIO 3 */
+#define                       Px4  0x10       /* GPIO 4 */
+#define                       Px5  0x20       /* GPIO 5 */
+#define                       Px6  0x40       /* GPIO 6 */
+#define                       Px7  0x80       /* GPIO 7 */
+#define                       Px8  0x100      /* GPIO 8 */
+#define                       Px9  0x200      /* GPIO 9 */
+#define                      Px10  0x400      /* GPIO 10 */
+#define                      Px11  0x800      /* GPIO 11 */
+#define                      Px12  0x1000     /* GPIO 12 */
+#define                      Px13  0x2000     /* GPIO 13 */
+#define                      Px14  0x4000     /* GPIO 14 */
+#define                      Px15  0x8000     /* GPIO 15 */
+
+/* Bit masks for PORTA_MUX - PORTJ_MUX */
+
+#define                      PxM0  0x3        /* GPIO Mux 0 */
+#define                      PxM1  0xc        /* GPIO Mux 1 */
+#define                      PxM2  0x30       /* GPIO Mux 2 */
+#define                      PxM3  0xc0       /* GPIO Mux 3 */
+#define                      PxM4  0x300      /* GPIO Mux 4 */
+#define                      PxM5  0xc00      /* GPIO Mux 5 */
+#define                      PxM6  0x3000     /* GPIO Mux 6 */
+#define                      PxM7  0xc000     /* GPIO Mux 7 */
+#define                      PxM8  0x30000    /* GPIO Mux 8 */
+#define                      PxM9  0xc0000    /* GPIO Mux 9 */
+#define                     PxM10  0x300000   /* GPIO Mux 10 */
+#define                     PxM11  0xc00000   /* GPIO Mux 11 */
+#define                     PxM12  0x3000000  /* GPIO Mux 12 */
+#define                     PxM13  0xc000000  /* GPIO Mux 13 */
+#define                     PxM14  0x30000000 /* GPIO Mux 14 */
+#define                     PxM15  0xc0000000 /* GPIO Mux 15 */
+
+
+/* Bit masks for PINTx_MASK_SET/CLEAR, PINTx_REQUEST, PINTx_LATCH, PINTx_EDGE_SET/CLEAR, PINTx_INVERT_SET/CLEAR, PINTx_PINTSTATE */
+
+#define                       IB0  0x1        /* Interrupt Bit 0 */
+#define                       IB1  0x2        /* Interrupt Bit 1 */
+#define                       IB2  0x4        /* Interrupt Bit 2 */
+#define                       IB3  0x8        /* Interrupt Bit 3 */
+#define                       IB4  0x10       /* Interrupt Bit 4 */
+#define                       IB5  0x20       /* Interrupt Bit 5 */
+#define                       IB6  0x40       /* Interrupt Bit 6 */
+#define                       IB7  0x80       /* Interrupt Bit 7 */
+#define                       IB8  0x100      /* Interrupt Bit 8 */
+#define                       IB9  0x200      /* Interrupt Bit 9 */
+#define                      IB10  0x400      /* Interrupt Bit 10 */
+#define                      IB11  0x800      /* Interrupt Bit 11 */
+#define                      IB12  0x1000     /* Interrupt Bit 12 */
+#define                      IB13  0x2000     /* Interrupt Bit 13 */
+#define                      IB14  0x4000     /* Interrupt Bit 14 */
+#define                      IB15  0x8000     /* Interrupt Bit 15 */
+
+/* Bit masks for TIMERx_CONFIG */
+
+#define                     TMODE  0x3        /* Timer Mode */
+#define                  PULSE_HI  0x4        /* Pulse Polarity */
+#define                PERIOD_CNT  0x8        /* Period Count */
+#define                   IRQ_ENA  0x10       /* Interrupt Request Enable */
+#define                   TIN_SEL  0x20       /* Timer Input Select */
+#define                   OUT_DIS  0x40       /* Output Pad Disable */
+#define                   CLK_SEL  0x80       /* Timer Clock Select */
+#define                 TOGGLE_HI  0x100      /* Toggle Mode */
+#define                   EMU_RUN  0x200      /* Emulation Behavior Select */
+#define                   ERR_TYP  0xc000     /* Error Type */
+
+/* Bit masks for TIMER_ENABLE0 */
+
+#define                    TIMEN0  0x1        /* Timer 0 Enable */
+#define                    TIMEN1  0x2        /* Timer 1 Enable */
+#define                    TIMEN2  0x4        /* Timer 2 Enable */
+#define                    TIMEN3  0x8        /* Timer 3 Enable */
+#define                    TIMEN4  0x10       /* Timer 4 Enable */
+#define                    TIMEN5  0x20       /* Timer 5 Enable */
+#define                    TIMEN6  0x40       /* Timer 6 Enable */
+#define                    TIMEN7  0x80       /* Timer 7 Enable */
+
+/* Bit masks for TIMER_DISABLE0 */
+
+#define                   TIMDIS0  0x1        /* Timer 0 Disable */
+#define                   TIMDIS1  0x2        /* Timer 1 Disable */
+#define                   TIMDIS2  0x4        /* Timer 2 Disable */
+#define                   TIMDIS3  0x8        /* Timer 3 Disable */
+#define                   TIMDIS4  0x10       /* Timer 4 Disable */
+#define                   TIMDIS5  0x20       /* Timer 5 Disable */
+#define                   TIMDIS6  0x40       /* Timer 6 Disable */
+#define                   TIMDIS7  0x80       /* Timer 7 Disable */
+
+/* Bit masks for TIMER_STATUS0 */
+
+#define                    TIMIL0  0x1        /* Timer 0 Interrupt */
+#define                    TIMIL1  0x2        /* Timer 1 Interrupt */
+#define                    TIMIL2  0x4        /* Timer 2 Interrupt */
+#define                    TIMIL3  0x8        /* Timer 3 Interrupt */
+#define                 TOVF_ERR0  0x10       /* Timer 0 Counter Overflow */
+#define                 TOVF_ERR1  0x20       /* Timer 1 Counter Overflow */
+#define                 TOVF_ERR2  0x40       /* Timer 2 Counter Overflow */
+#define                 TOVF_ERR3  0x80       /* Timer 3 Counter Overflow */
+#define                     TRUN0  0x1000     /* Timer 0 Slave Enable Status */
+#define                     TRUN1  0x2000     /* Timer 1 Slave Enable Status */
+#define                     TRUN2  0x4000     /* Timer 2 Slave Enable Status */
+#define                     TRUN3  0x8000     /* Timer 3 Slave Enable Status */
+#define                    TIMIL4  0x10000    /* Timer 4 Interrupt */
+#define                    TIMIL5  0x20000    /* Timer 5 Interrupt */
+#define                    TIMIL6  0x40000    /* Timer 6 Interrupt */
+#define                    TIMIL7  0x80000    /* Timer 7 Interrupt */
+#define                 TOVF_ERR4  0x100000   /* Timer 4 Counter Overflow */
+#define                 TOVF_ERR5  0x200000   /* Timer 5 Counter Overflow */
+#define                 TOVF_ERR6  0x400000   /* Timer 6 Counter Overflow */
+#define                 TOVF_ERR7  0x800000   /* Timer 7 Counter Overflow */
+#define                     TRUN4  0x10000000 /* Timer 4 Slave Enable Status */
+#define                     TRUN5  0x20000000 /* Timer 5 Slave Enable Status */
+#define                     TRUN6  0x40000000 /* Timer 6 Slave Enable Status */
+#define                     TRUN7  0x80000000 /* Timer 7 Slave Enable Status */
+
+/* Bit masks for SECURE_SYSSWT */
+
+#define                   EMUDABL  0x1        /* Emulation Disable. */
+#define                   RSTDABL  0x2        /* Reset Disable */
+#define                   L1IDABL  0x1c       /* L1 Instruction Memory Disable. */
+#define                  L1DADABL  0xe0       /* L1 Data Bank A Memory Disable. */
+#define                  L1DBDABL  0x700      /* L1 Data Bank B Memory Disable. */
+#define                   DMA0OVR  0x800      /* DMA0 Memory Access Override */
+#define                   DMA1OVR  0x1000     /* DMA1 Memory Access Override */
+#define                    EMUOVR  0x4000     /* Emulation Override */
+#define                    OTPSEN  0x8000     /* OTP Secrets Enable. */
+#define                    L2DABL  0x70000    /* L2 Memory Disable. */
+
+/* Bit masks for SECURE_CONTROL */
+
+#define                   SECURE0  0x1        /* SECURE 0 */
+#define                   SECURE1  0x2        /* SECURE 1 */
+#define                   SECURE2  0x4        /* SECURE 2 */
+#define                   SECURE3  0x8        /* SECURE 3 */
+
+/* Bit masks for SECURE_STATUS */
+
+#define                   SECMODE  0x3        /* Secured Mode Control State */
+#define                       NMI  0x4        /* Non Maskable Interrupt */
+#define                   AFVALID  0x8        /* Authentication Firmware Valid */
+#define                    AFEXIT  0x10       /* Authentication Firmware Exit */
+#define                   SECSTAT  0xe0       /* Secure Status */
+
+/* SWRST Masks */
+#define              SYSTEM_RESET 0x0007       /* Initiates A System Software Reset */
+#define              DOUBLE_FAULT 0x0008       /* Core Double Fault Causes Reset */
+#define              RESET_DOUBLE 0x2000       /* SW Reset Generated By Core Double-Fault */
+#define                RESET_WDOG 0x4000       /* SW Reset Generated By Watchdog Timer */
+#define            RESET_SOFTWARE 0x8000       /* SW Reset Occurred Since Last Read Of SWRST */
+
+/* Bit masks for EPPIx_STATUS */
+
+#define                 CFIFO_ERR  0x1        /* Chroma FIFO Error */
+#define                 YFIFO_ERR  0x2        /* Luma FIFO Error */
+#define                 LTERR_OVR  0x4        /* Line Track Overflow */
+#define                LTERR_UNDR  0x8        /* Line Track Underflow */
+#define                 FTERR_OVR  0x10       /* Frame Track Overflow */
+#define                FTERR_UNDR  0x20       /* Frame Track Underflow */
+#define                  ERR_NCOR  0x40       /* Preamble Error Not Corrected */
+#define                   DMA1URQ  0x80       /* DMA1 Urgent Request */
+#define                   DMA0URQ  0x100      /* DMA0 Urgent Request */
+#define                   ERR_DET  0x4000     /* Preamble Error Detected */
+#define                       FLD  0x8000     /* Field */
+
+/* Bit masks for EPPIx_CONTROL */
+
+#define                   EPPI_EN  0x1        /* Enable */
+#define                  EPPI_DIR  0x2        /* Direction */
+#define                  XFR_TYPE  0xc        /* Operating Mode */
+#define                    FS_CFG  0x30       /* Frame Sync Configuration */
+#define                   FLD_SEL  0x40       /* Field Select/Trigger */
+#define                  ITU_TYPE  0x80       /* ITU Interlaced or Progressive */
+#define                  BLANKGEN  0x100      /* ITU Output Mode with Internal Blanking Generation */
+#define                   ICLKGEN  0x200      /* Internal Clock Generation */
+#define                    IFSGEN  0x400      /* Internal Frame Sync Generation */
+#define                      POLC  0x1800     /* Frame Sync and Data Driving/Sampling Edges */
+#define                      POLS  0x6000     /* Frame Sync Polarity */
+#define                   DLENGTH  0x38000    /* Data Length */
+#define                   SKIP_EN  0x40000    /* Skip Enable */
+#define                   SKIP_EO  0x80000    /* Skip Even or Odd */
+#define                    PACKEN  0x100000   /* Packing/Unpacking Enable */
+#define                    SWAPEN  0x200000   /* Swap Enable */
+#define                  SIGN_EXT  0x400000   /* Sign Extension or Zero-filled / Data Split Format */
+#define             SPLT_EVEN_ODD  0x800000   /* Split Even and Odd Data Samples */
+#define               SUBSPLT_ODD  0x1000000  /* Sub-split Odd Samples */
+#define                    DMACFG  0x2000000  /* One or Two DMA Channels Mode */
+#define                RGB_FMT_EN  0x4000000  /* RGB Formatting Enable */
+#define                  FIFO_RWM  0x18000000 /* FIFO Regular Watermarks */
+#define                  FIFO_UWM  0x60000000 /* FIFO Urgent Watermarks */
+
+#define DLEN_8		(0 << 15) /* 000 - 8 bits */
+#define DLEN_10		(1 << 15) /* 001 - 10 bits */
+#define DLEN_12		(2 << 15) /* 010 - 12 bits */
+#define DLEN_14		(3 << 15) /* 011 - 14 bits */
+#define DLEN_16		(4 << 15) /* 100 - 16 bits */
+#define DLEN_18		(5 << 15) /* 101 - 18 bits */
+#define DLEN_24		(6 << 15) /* 110 - 24 bits */
+
+
+/* Bit masks for EPPIx_FS2W_LVB */
+
+#define                   F1VB_BD  0xff       /* Vertical Blanking before Field 1 Active Data */
+#define                   F1VB_AD  0xff00     /* Vertical Blanking after Field 1 Active Data */
+#define                   F2VB_BD  0xff0000   /* Vertical Blanking before Field 2 Active Data */
+#define                   F2VB_AD  0xff000000 /* Vertical Blanking after Field 2 Active Data */
+
+/* Bit masks for EPPIx_FS2W_LAVF */
+
+#define                    F1_ACT  0xffff     /* Number of Lines of Active Data in Field 1 */
+#define                    F2_ACT  0xffff0000 /* Number of Lines of Active Data in Field 2 */
+
+/* Bit masks for EPPIx_CLIP */
+
+#define                   LOW_ODD  0xff       /* Lower Limit for Odd Bytes (Chroma) */
+#define                  HIGH_ODD  0xff00     /* Upper Limit for Odd Bytes (Chroma) */
+#define                  LOW_EVEN  0xff0000   /* Lower Limit for Even Bytes (Luma) */
+#define                 HIGH_EVEN  0xff000000 /* Upper Limit for Even Bytes (Luma) */
+
+
+/* ******************************************* */
+/*     MULTI BIT MACRO ENUMERATIONS            */
+/* ******************************************* */
+
+/* BCODE bit field options (SYSCFG register) */
+
+#define BCODE_WAKEUP    0x0000  /* boot according to wake-up condition */
+#define BCODE_FULLBOOT  0x0010  /* always perform full boot */
+#define BCODE_QUICKBOOT 0x0020  /* always perform quick boot */
+#define BCODE_NOBOOT    0x0030  /* always perform full boot */
+
+/* TMODE in TIMERx_CONFIG bit field options */
+
+#define PWM_OUT  0x0001
+#define WDTH_CAP 0x0002
+#define EXT_CLK  0x0003
+
+/* PINTx Register Bit Definitions */
+
+#define PIQ0 0x00000001
+#define PIQ1 0x00000002
+#define PIQ2 0x00000004
+#define PIQ3 0x00000008
+
+#define PIQ4 0x00000010
+#define PIQ5 0x00000020
+#define PIQ6 0x00000040
+#define PIQ7 0x00000080
+
+#define PIQ8 0x00000100
+#define PIQ9 0x00000200
+#define PIQ10 0x00000400
+#define PIQ11 0x00000800
+
+#define PIQ12 0x00001000
+#define PIQ13 0x00002000
+#define PIQ14 0x00004000
+#define PIQ15 0x00008000
+
+#define PIQ16 0x00010000
+#define PIQ17 0x00020000
+#define PIQ18 0x00040000
+#define PIQ19 0x00080000
+
+#define PIQ20 0x00100000
+#define PIQ21 0x00200000
+#define PIQ22 0x00400000
+#define PIQ23 0x00800000
+
+#define PIQ24 0x01000000
+#define PIQ25 0x02000000
+#define PIQ26 0x04000000
+#define PIQ27 0x08000000
+
+#define PIQ28 0x10000000
+#define PIQ29 0x20000000
+#define PIQ30 0x40000000
+#define PIQ31 0x80000000
+
+/* Port Muxing Bit Fields for PORTx_MUX Registers */
+
+#define MUX0 0x00000003
+#define MUX0_0 0x00000000
+#define MUX0_1 0x00000001
+#define MUX0_2 0x00000002
+#define MUX0_3 0x00000003
+
+#define MUX1 0x0000000C
+#define MUX1_0 0x00000000
+#define MUX1_1 0x00000004
+#define MUX1_2 0x00000008
+#define MUX1_3 0x0000000C
+
+#define MUX2 0x00000030
+#define MUX2_0 0x00000000
+#define MUX2_1 0x00000010
+#define MUX2_2 0x00000020
+#define MUX2_3 0x00000030
+
+#define MUX3 0x000000C0
+#define MUX3_0 0x00000000
+#define MUX3_1 0x00000040
+#define MUX3_2 0x00000080
+#define MUX3_3 0x000000C0
+
+#define MUX4 0x00000300
+#define MUX4_0 0x00000000
+#define MUX4_1 0x00000100
+#define MUX4_2 0x00000200
+#define MUX4_3 0x00000300
+
+#define MUX5 0x00000C00
+#define MUX5_0 0x00000000
+#define MUX5_1 0x00000400
+#define MUX5_2 0x00000800
+#define MUX5_3 0x00000C00
+
+#define MUX6 0x00003000
+#define MUX6_0 0x00000000
+#define MUX6_1 0x00001000
+#define MUX6_2 0x00002000
+#define MUX6_3 0x00003000
+
+#define MUX7 0x0000C000
+#define MUX7_0 0x00000000
+#define MUX7_1 0x00004000
+#define MUX7_2 0x00008000
+#define MUX7_3 0x0000C000
+
+#define MUX8 0x00030000
+#define MUX8_0 0x00000000
+#define MUX8_1 0x00010000
+#define MUX8_2 0x00020000
+#define MUX8_3 0x00030000
+
+#define MUX9 0x000C0000
+#define MUX9_0 0x00000000
+#define MUX9_1 0x00040000
+#define MUX9_2 0x00080000
+#define MUX9_3 0x000C0000
+
+#define MUX10 0x00300000
+#define MUX10_0 0x00000000
+#define MUX10_1 0x00100000
+#define MUX10_2 0x00200000
+#define MUX10_3 0x00300000
+
+#define MUX11 0x00C00000
+#define MUX11_0 0x00000000
+#define MUX11_1 0x00400000
+#define MUX11_2 0x00800000
+#define MUX11_3 0x00C00000
+
+#define MUX12 0x03000000
+#define MUX12_0 0x00000000
+#define MUX12_1 0x01000000
+#define MUX12_2 0x02000000
+#define MUX12_3 0x03000000
+
+#define MUX13 0x0C000000
+#define MUX13_0 0x00000000
+#define MUX13_1 0x04000000
+#define MUX13_2 0x08000000
+#define MUX13_3 0x0C000000
+
+#define MUX14 0x30000000
+#define MUX14_0 0x00000000
+#define MUX14_1 0x10000000
+#define MUX14_2 0x20000000
+#define MUX14_3 0x30000000
+
+#define MUX15 0xC0000000
+#define MUX15_0 0x00000000
+#define MUX15_1 0x40000000
+#define MUX15_2 0x80000000
+#define MUX15_3 0xC0000000
+
+#define MUX(b15,b14,b13,b12,b11,b10,b9,b8,b7,b6,b5,b4,b3,b2,b1,b0) \
+    ((((b15)&3) << 30) | \
+     (((b14)&3) << 28) | \
+     (((b13)&3) << 26) | \
+     (((b12)&3) << 24) | \
+     (((b11)&3) << 22) | \
+     (((b10)&3) << 20) | \
+     (((b9) &3) << 18) | \
+     (((b8) &3) << 16) | \
+     (((b7) &3) << 14) | \
+     (((b6) &3) << 12) | \
+     (((b5) &3) << 10) | \
+     (((b4) &3) << 8)  | \
+     (((b3) &3) << 6)  | \
+     (((b2) &3) << 4)  | \
+     (((b1) &3) << 2)  | \
+     (((b0) &3)))
+
+/* Bit fields for PINT0_ASSIGN and PINT1_ASSIGN registers */
+
+#define B0MAP 0x000000FF     /* Byte 0 Lower Half Port Mapping */
+#define B0MAP_PAL 0x00000000 /* Map Port A Low to Byte 0 */
+#define B0MAP_PBL 0x00000001 /* Map Port B Low to Byte 0 */
+#define B1MAP 0x0000FF00     /* Byte 1 Upper Half Port Mapping */
+#define B1MAP_PAH 0x00000000 /* Map Port A High to Byte 1 */
+#define B1MAP_PBH 0x00000100 /* Map Port B High to Byte 1 */
+#define B2MAP 0x00FF0000     /* Byte 2 Lower Half Port Mapping */
+#define B2MAP_PAL 0x00000000 /* Map Port A Low to Byte 2 */
+#define B2MAP_PBL 0x00010000 /* Map Port B Low to Byte 2 */
+#define B3MAP 0xFF000000     /* Byte 3 Upper Half Port Mapping */
+#define B3MAP_PAH 0x00000000 /* Map Port A High to Byte 3 */
+#define B3MAP_PBH 0x01000000 /* Map Port B High to Byte 3 */
+
+/* Bit fields for PINT2_ASSIGN and PINT3_ASSIGN registers */
+
+#define B0MAP_PCL 0x00000000 /* Map Port C Low to Byte 0 */
+#define B0MAP_PDL 0x00000001 /* Map Port D Low to Byte 0 */
+#define B0MAP_PEL 0x00000002 /* Map Port E Low to Byte 0 */
+#define B0MAP_PFL 0x00000003 /* Map Port F Low to Byte 0 */
+#define B0MAP_PGL 0x00000004 /* Map Port G Low to Byte 0 */
+#define B0MAP_PHL 0x00000005 /* Map Port H Low to Byte 0 */
+#define B0MAP_PIL 0x00000006 /* Map Port I Low to Byte 0 */
+#define B0MAP_PJL 0x00000007 /* Map Port J Low to Byte 0 */
+
+#define B1MAP_PCH 0x00000000 /* Map Port C High to Byte 1 */
+#define B1MAP_PDH 0x00000100 /* Map Port D High to Byte 1 */
+#define B1MAP_PEH 0x00000200 /* Map Port E High to Byte 1 */
+#define B1MAP_PFH 0x00000300 /* Map Port F High to Byte 1 */
+#define B1MAP_PGH 0x00000400 /* Map Port G High to Byte 1 */
+#define B1MAP_PHH 0x00000500 /* Map Port H High to Byte 1 */
+#define B1MAP_PIH 0x00000600 /* Map Port I High to Byte 1 */
+#define B1MAP_PJH 0x00000700 /* Map Port J High to Byte 1 */
+
+#define B2MAP_PCL 0x00000000 /* Map Port C Low to Byte 2 */
+#define B2MAP_PDL 0x00010000 /* Map Port D Low to Byte 2 */
+#define B2MAP_PEL 0x00020000 /* Map Port E Low to Byte 2 */
+#define B2MAP_PFL 0x00030000 /* Map Port F Low to Byte 2 */
+#define B2MAP_PGL 0x00040000 /* Map Port G Low to Byte 2 */
+#define B2MAP_PHL 0x00050000 /* Map Port H Low to Byte 2 */
+#define B2MAP_PIL 0x00060000 /* Map Port I Low to Byte 2 */
+#define B2MAP_PJL 0x00070000 /* Map Port J Low to Byte 2 */
+
+#define B3MAP_PCH 0x00000000 /* Map Port C High to Byte 3 */
+#define B3MAP_PDH 0x01000000 /* Map Port D High to Byte 3 */
+#define B3MAP_PEH 0x02000000 /* Map Port E High to Byte 3 */
+#define B3MAP_PFH 0x03000000 /* Map Port F High to Byte 3 */
+#define B3MAP_PGH 0x04000000 /* Map Port G High to Byte 3 */
+#define B3MAP_PHH 0x05000000 /* Map Port H High to Byte 3 */
+#define B3MAP_PIH 0x06000000 /* Map Port I High to Byte 3 */
+#define B3MAP_PJH 0x07000000 /* Map Port J High to Byte 3 */
+
+#endif /* _DEF_BF54X_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/dma.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/dma.h
new file mode 100644
index 0000000..1a1091b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/dma.h
@@ -0,0 +1,72 @@
+/* mach/dma.h - arch-specific DMA defines
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define CH_SPORT0_RX		0
+#define CH_SPORT0_TX		1
+#define CH_SPORT1_RX		2
+#define CH_SPORT1_TX		3
+#define CH_SPI0			4
+#define CH_SPI1			5
+#define CH_UART0_RX 		6
+#define CH_UART0_TX 		7
+#define CH_UART1_RX 		8
+#define CH_UART1_TX 		9
+#define CH_ATAPI_RX		10
+#define CH_ATAPI_TX		11
+#define CH_EPPI0		12
+#define CH_EPPI1		13
+#define CH_EPPI2		14
+#define CH_PIXC_IMAGE		15
+#define CH_PIXC_OVERLAY		16
+#define CH_PIXC_OUTPUT		17
+#define CH_SPORT2_RX		18
+#define CH_SPORT2_TX		19
+#define CH_SPORT3_RX		20
+#define CH_SPORT3_TX		21
+#define CH_SDH			22
+#define CH_NFC			22
+#define CH_SPI2			23
+
+#if defined(CONFIG_UART2_DMA_RX_ON_DMA13)
+#define CH_UART2_RX		13
+#define IRQ_UART2_RX		BFIN_IRQ(37)	/* UART2 RX USE EPP1 (DMA13) Interrupt */
+#define CH_UART2_TX		14
+#define IRQ_UART2_TX		BFIN_IRQ(38)	/* UART2 RX USE EPP1 (DMA14) Interrupt */
+#else						/* Default USE SPORT2's DMA Channel */
+#define CH_UART2_RX		18
+#define IRQ_UART2_RX		BFIN_IRQ(33)	/* UART2 RX (DMA18) Interrupt */
+#define CH_UART2_TX		19
+#define IRQ_UART2_TX		BFIN_IRQ(34)	/* UART2 TX (DMA19) Interrupt */
+#endif
+
+#if defined(CONFIG_UART3_DMA_RX_ON_DMA15)
+#define CH_UART3_RX		15
+#define IRQ_UART3_RX		BFIN_IRQ(64)	/* UART3 RX USE PIXC IN0 (DMA15) Interrupt */
+#define CH_UART3_TX		16
+#define IRQ_UART3_TX		BFIN_IRQ(65)	/* UART3 TX USE PIXC IN1 (DMA16) Interrupt */
+#else						/* Default USE SPORT3's DMA Channel */
+#define CH_UART3_RX		20
+#define IRQ_UART3_RX		BFIN_IRQ(35)	/* UART3 RX (DMA20) Interrupt */
+#define CH_UART3_TX		21
+#define IRQ_UART3_TX		BFIN_IRQ(36)	/* UART3 TX (DMA21) Interrupt */
+#endif
+
+#define CH_MEM_STREAM0_DEST	24
+#define CH_MEM_STREAM0_SRC	25
+#define CH_MEM_STREAM1_DEST	26
+#define CH_MEM_STREAM1_SRC	27
+#define CH_MEM_STREAM2_DEST	28
+#define CH_MEM_STREAM2_SRC	29
+#define CH_MEM_STREAM3_DEST	30
+#define CH_MEM_STREAM3_SRC	31
+
+#define MAX_DMA_CHANNELS 32
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/gpio.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/gpio.h
new file mode 100644
index 0000000..006da1e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/gpio.h
@@ -0,0 +1,210 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define GPIO_PA0	0
+#define GPIO_PA1	1
+#define GPIO_PA2	2
+#define GPIO_PA3	3
+#define GPIO_PA4	4
+#define GPIO_PA5	5
+#define GPIO_PA6	6
+#define GPIO_PA7	7
+#define GPIO_PA8	8
+#define GPIO_PA9	9
+#define GPIO_PA10	10
+#define GPIO_PA11	11
+#define GPIO_PA12	12
+#define GPIO_PA13	13
+#define GPIO_PA14	14
+#define GPIO_PA15	15
+#define GPIO_PB0	16
+#define GPIO_PB1	17
+#define GPIO_PB2	18
+#define GPIO_PB3	19
+#define GPIO_PB4	20
+#define GPIO_PB5	21
+#define GPIO_PB6	22
+#define GPIO_PB7	23
+#define GPIO_PB8	24
+#define GPIO_PB9	25
+#define GPIO_PB10	26
+#define GPIO_PB11	27
+#define GPIO_PB12	28
+#define GPIO_PB13	29
+#define GPIO_PB14	30
+#define GPIO_PB15	31	/* N/A */
+#define GPIO_PC0	32
+#define GPIO_PC1	33
+#define GPIO_PC2	34
+#define GPIO_PC3	35
+#define GPIO_PC4	36
+#define GPIO_PC5	37
+#define GPIO_PC6	38
+#define GPIO_PC7	39
+#define GPIO_PC8	40
+#define GPIO_PC9	41
+#define GPIO_PC10	42
+#define GPIO_PC11	43
+#define GPIO_PC12	44
+#define GPIO_PC13	45
+#define GPIO_PC14	46	/* N/A */
+#define GPIO_PC15	47	/* N/A */
+#define GPIO_PD0	48
+#define GPIO_PD1	49
+#define GPIO_PD2	50
+#define GPIO_PD3	51
+#define GPIO_PD4	52
+#define GPIO_PD5	53
+#define GPIO_PD6	54
+#define GPIO_PD7	55
+#define GPIO_PD8	56
+#define GPIO_PD9	57
+#define GPIO_PD10	58
+#define GPIO_PD11	59
+#define GPIO_PD12	60
+#define GPIO_PD13	61
+#define GPIO_PD14	62
+#define GPIO_PD15	63
+#define GPIO_PE0	64
+#define GPIO_PE1	65
+#define GPIO_PE2	66
+#define GPIO_PE3	67
+#define GPIO_PE4	68
+#define GPIO_PE5	69
+#define GPIO_PE6	70
+#define GPIO_PE7	71
+#define GPIO_PE8	72
+#define GPIO_PE9	73
+#define GPIO_PE10	74
+#define GPIO_PE11	75
+#define GPIO_PE12	76
+#define GPIO_PE13	77
+#define GPIO_PE14	78
+#define GPIO_PE15	79
+#define GPIO_PF0	80
+#define GPIO_PF1	81
+#define GPIO_PF2	82
+#define GPIO_PF3	83
+#define GPIO_PF4	84
+#define GPIO_PF5	85
+#define GPIO_PF6	86
+#define GPIO_PF7	87
+#define GPIO_PF8	88
+#define GPIO_PF9	89
+#define GPIO_PF10	90
+#define GPIO_PF11	91
+#define GPIO_PF12	92
+#define GPIO_PF13	93
+#define GPIO_PF14	94
+#define GPIO_PF15	95
+#define GPIO_PG0	96
+#define GPIO_PG1	97
+#define GPIO_PG2	98
+#define GPIO_PG3	99
+#define GPIO_PG4	100
+#define GPIO_PG5	101
+#define GPIO_PG6	102
+#define GPIO_PG7	103
+#define GPIO_PG8	104
+#define GPIO_PG9	105
+#define GPIO_PG10	106
+#define GPIO_PG11	107
+#define GPIO_PG12	108
+#define GPIO_PG13	109
+#define GPIO_PG14	110
+#define GPIO_PG15	111
+#define GPIO_PH0	112
+#define GPIO_PH1	113
+#define GPIO_PH2	114
+#define GPIO_PH3	115
+#define GPIO_PH4	116
+#define GPIO_PH5	117
+#define GPIO_PH6	118
+#define GPIO_PH7	119
+#define GPIO_PH8	120
+#define GPIO_PH9	121
+#define GPIO_PH10	122
+#define GPIO_PH11	123
+#define GPIO_PH12	124
+#define GPIO_PH13	125
+#define GPIO_PH14	126	/* N/A */
+#define GPIO_PH15	127	/* N/A */
+#define GPIO_PI0	128
+#define GPIO_PI1	129
+#define GPIO_PI2	130
+#define GPIO_PI3	131
+#define GPIO_PI4	132
+#define GPIO_PI5	133
+#define GPIO_PI6	134
+#define GPIO_PI7	135
+#define GPIO_PI8	136
+#define GPIO_PI9	137
+#define GPIO_PI10	138
+#define GPIO_PI11	139
+#define GPIO_PI12	140
+#define GPIO_PI13	141
+#define GPIO_PI14	142
+#define GPIO_PI15	143
+#define GPIO_PJ0	144
+#define GPIO_PJ1	145
+#define GPIO_PJ2	146
+#define GPIO_PJ3	147
+#define GPIO_PJ4	148
+#define GPIO_PJ5	149
+#define GPIO_PJ6	150
+#define GPIO_PJ7	151
+#define GPIO_PJ8	152
+#define GPIO_PJ9	153
+#define GPIO_PJ10	154
+#define GPIO_PJ11	155
+#define GPIO_PJ12	156
+#define GPIO_PJ13	157
+#define GPIO_PJ14	158	/* N/A */
+#define GPIO_PJ15	159	/* N/A */
+
+#define MAX_BLACKFIN_GPIOS 160
+
+#define BFIN_GPIO_PINT 1
+#define NR_PINT_SYS_IRQS        4
+#define NR_PINTS                160
+
+#ifndef __ASSEMBLY__
+
+struct gpio_port_t {
+	unsigned short port_fer;
+	unsigned short dummy1;
+	unsigned short data;
+	unsigned short dummy2;
+	unsigned short data_set;
+	unsigned short dummy3;
+	unsigned short data_clear;
+	unsigned short dummy4;
+	unsigned short dir_set;
+	unsigned short dummy5;
+	unsigned short dir_clear;
+	unsigned short dummy6;
+	unsigned short inen;
+	unsigned short dummy7;
+	unsigned int port_mux;
+};
+
+#endif
+
+#include <mach-common/ports-a.h>
+#include <mach-common/ports-b.h>
+#include <mach-common/ports-c.h>
+#include <mach-common/ports-d.h>
+#include <mach-common/ports-e.h>
+#include <mach-common/ports-f.h>
+#include <mach-common/ports-g.h>
+#include <mach-common/ports-h.h>
+#include <mach-common/ports-i.h>
+#include <mach-common/ports-j.h>
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/irq.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/irq.h
new file mode 100644
index 0000000..cf7cb72
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/irq.h
@@ -0,0 +1,454 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BF548_IRQ_H_
+#define _BF548_IRQ_H_
+
+#include <mach-common/irq.h>
+
+#define NR_PERI_INTS		(3 * 32)
+
+#define IRQ_PLL_WAKEUP		BFIN_IRQ(0)	/* PLL Wakeup Interrupt */
+#define IRQ_DMAC0_ERROR		BFIN_IRQ(1)	/* DMAC0 Status Interrupt */
+#define IRQ_EPPI0_ERROR		BFIN_IRQ(2)	/* EPPI0 Error Interrupt */
+#define IRQ_SPORT0_ERROR	BFIN_IRQ(3)	/* SPORT0 Error Interrupt */
+#define IRQ_SPORT1_ERROR	BFIN_IRQ(4)	/* SPORT1 Error Interrupt */
+#define IRQ_SPI0_ERROR		BFIN_IRQ(5)	/* SPI0 Status(Error) Interrupt */
+#define IRQ_UART0_ERROR		BFIN_IRQ(6)	/* UART0 Status(Error) Interrupt */
+#define IRQ_RTC			BFIN_IRQ(7)	/* RTC Interrupt */
+#define IRQ_EPPI0		BFIN_IRQ(8)	/* EPPI0 Interrupt (DMA12) */
+#define IRQ_SPORT0_RX		BFIN_IRQ(9)	/* SPORT0 RX Interrupt (DMA0) */
+#define IRQ_SPORT0_TX		BFIN_IRQ(10)	/* SPORT0 TX Interrupt (DMA1) */
+#define IRQ_SPORT1_RX		BFIN_IRQ(11)	/* SPORT1 RX Interrupt (DMA2) */
+#define IRQ_SPORT1_TX		BFIN_IRQ(12)	/* SPORT1 TX Interrupt (DMA3) */
+#define IRQ_SPI0		BFIN_IRQ(13)	/* SPI0 Interrupt (DMA4) */
+#define IRQ_UART0_RX		BFIN_IRQ(14)	/* UART0 RX Interrupt (DMA6) */
+#define IRQ_UART0_TX		BFIN_IRQ(15)	/* UART0 TX Interrupt (DMA7) */
+#define IRQ_TIMER8		BFIN_IRQ(16)	/* TIMER 8 Interrupt */
+#define IRQ_TIMER9		BFIN_IRQ(17)	/* TIMER 9 Interrupt */
+#define IRQ_TIMER10		BFIN_IRQ(18)	/* TIMER 10 Interrupt */
+#define IRQ_PINT0		BFIN_IRQ(19)	/* PINT0 Interrupt */
+#define IRQ_PINT1		BFIN_IRQ(20)	/* PINT1 Interrupt */
+#define IRQ_MDMAS0		BFIN_IRQ(21)	/* MDMA Stream 0 Interrupt */
+#define IRQ_MDMAS1		BFIN_IRQ(22)	/* MDMA Stream 1 Interrupt */
+#define IRQ_WATCH		BFIN_IRQ(23)	/* Watchdog Interrupt */
+#define IRQ_DMAC1_ERROR		BFIN_IRQ(24)	/* DMAC1 Status (Error) Interrupt */
+#define IRQ_SPORT2_ERROR	BFIN_IRQ(25)	/* SPORT2 Error Interrupt */
+#define IRQ_SPORT3_ERROR	BFIN_IRQ(26)	/* SPORT3 Error Interrupt */
+#define IRQ_MXVR_DATA		BFIN_IRQ(27)	/* MXVR Data Interrupt */
+#define IRQ_SPI1_ERROR		BFIN_IRQ(28)	/* SPI1 Status (Error) Interrupt */
+#define IRQ_SPI2_ERROR		BFIN_IRQ(29)	/* SPI2 Status (Error) Interrupt */
+#define IRQ_UART1_ERROR		BFIN_IRQ(30)	/* UART1 Status (Error) Interrupt */
+#define IRQ_UART2_ERROR		BFIN_IRQ(31)	/* UART2 Status (Error) Interrupt */
+#define IRQ_CAN0_ERROR		BFIN_IRQ(32)	/* CAN0 Status (Error) Interrupt */
+#define IRQ_SPORT2_RX		BFIN_IRQ(33)	/* SPORT2 RX (DMA18) Interrupt */
+#define IRQ_SPORT2_TX		BFIN_IRQ(34)	/* SPORT2 TX (DMA19) Interrupt */
+#define IRQ_SPORT3_RX		BFIN_IRQ(35)	/* SPORT3 RX (DMA20) Interrupt */
+#define IRQ_SPORT3_TX		BFIN_IRQ(36)	/* SPORT3 TX (DMA21) Interrupt */
+#define IRQ_EPPI1		BFIN_IRQ(37)	/* EPP1 (DMA13) Interrupt */
+#define IRQ_EPPI2		BFIN_IRQ(38)	/* EPP2 (DMA14) Interrupt */
+#define IRQ_SPI1		BFIN_IRQ(39)	/* SPI1 (DMA5) Interrupt */
+#define IRQ_SPI2		BFIN_IRQ(40)	/* SPI2 (DMA23) Interrupt */
+#define IRQ_UART1_RX		BFIN_IRQ(41)	/* UART1 RX (DMA8) Interrupt */
+#define IRQ_UART1_TX		BFIN_IRQ(42)	/* UART1 TX (DMA9) Interrupt */
+#define IRQ_ATAPI_RX		BFIN_IRQ(43)	/* ATAPI RX (DMA10) Interrupt */
+#define IRQ_ATAPI_TX		BFIN_IRQ(44)	/* ATAPI TX (DMA11) Interrupt */
+#define IRQ_TWI0		BFIN_IRQ(45)	/* TWI0 Interrupt */
+#define IRQ_TWI1		BFIN_IRQ(46)	/* TWI1 Interrupt */
+#define IRQ_CAN0_RX		BFIN_IRQ(47)	/* CAN0 Receive Interrupt */
+#define IRQ_CAN0_TX		BFIN_IRQ(48)	/* CAN0 Transmit Interrupt */
+#define IRQ_MDMAS2		BFIN_IRQ(49)	/* MDMA Stream 2 Interrupt */
+#define IRQ_MDMAS3		BFIN_IRQ(50)	/* MDMA Stream 3 Interrupt */
+#define IRQ_MXVR_ERROR		BFIN_IRQ(51)	/* MXVR Status (Error) Interrupt */
+#define IRQ_MXVR_MSG		BFIN_IRQ(52)	/* MXVR Message Interrupt */
+#define IRQ_MXVR_PKT		BFIN_IRQ(53)	/* MXVR Packet Interrupt */
+#define IRQ_EPPI1_ERROR		BFIN_IRQ(54)	/* EPPI1 Error Interrupt */
+#define IRQ_EPPI2_ERROR		BFIN_IRQ(55)	/* EPPI2 Error Interrupt */
+#define IRQ_UART3_ERROR		BFIN_IRQ(56)	/* UART3 Status (Error) Interrupt */
+#define IRQ_HOST_ERROR		BFIN_IRQ(57)	/* HOST Status (Error) Interrupt */
+#define IRQ_PIXC_ERROR		BFIN_IRQ(59)	/* PIXC Status (Error) Interrupt */
+#define IRQ_NFC_ERROR		BFIN_IRQ(60)	/* NFC Error Interrupt */
+#define IRQ_ATAPI_ERROR		BFIN_IRQ(61)	/* ATAPI Error Interrupt */
+#define IRQ_CAN1_ERROR		BFIN_IRQ(62)	/* CAN1 Status (Error) Interrupt */
+#define IRQ_HS_DMA_ERROR	BFIN_IRQ(63)	/* Handshake DMA Status Interrupt */
+#define IRQ_PIXC_IN0		BFIN_IRQ(64)	/* PIXC IN0 (DMA15) Interrupt */
+#define IRQ_PIXC_IN1		BFIN_IRQ(65)	/* PIXC IN1 (DMA16) Interrupt */
+#define IRQ_PIXC_OUT		BFIN_IRQ(66)	/* PIXC OUT (DMA17) Interrupt */
+#define IRQ_SDH			BFIN_IRQ(67)	/* SDH/NFC (DMA22) Interrupt */
+#define IRQ_CNT			BFIN_IRQ(68)	/* CNT Interrupt */
+#define IRQ_KEY			BFIN_IRQ(69)	/* KEY Interrupt */
+#define IRQ_CAN1_RX		BFIN_IRQ(70)	/* CAN1 RX Interrupt */
+#define IRQ_CAN1_TX		BFIN_IRQ(71)	/* CAN1 TX Interrupt */
+#define IRQ_SDH_MASK0		BFIN_IRQ(72)	/* SDH Mask 0 Interrupt */
+#define IRQ_SDH_MASK1		BFIN_IRQ(73)	/* SDH Mask 1 Interrupt */
+#define IRQ_USB_INT0		BFIN_IRQ(75)	/* USB INT0 Interrupt */
+#define IRQ_USB_INT1		BFIN_IRQ(76)	/* USB INT1 Interrupt */
+#define IRQ_USB_INT2		BFIN_IRQ(77)	/* USB INT2 Interrupt */
+#define IRQ_USB_DMA		BFIN_IRQ(78)	/* USB DMA Interrupt */
+#define IRQ_OPTSEC		BFIN_IRQ(79)	/* OTPSEC Interrupt */
+#define IRQ_TIMER0		BFIN_IRQ(86)	/* Timer 0 Interrupt */
+#define IRQ_TIMER1		BFIN_IRQ(87)	/* Timer 1 Interrupt */
+#define IRQ_TIMER2		BFIN_IRQ(88)	/* Timer 2 Interrupt */
+#define IRQ_TIMER3		BFIN_IRQ(89)	/* Timer 3 Interrupt */
+#define IRQ_TIMER4		BFIN_IRQ(90)	/* Timer 4 Interrupt */
+#define IRQ_TIMER5		BFIN_IRQ(91)	/* Timer 5 Interrupt */
+#define IRQ_TIMER6		BFIN_IRQ(92)	/* Timer 6 Interrupt */
+#define IRQ_TIMER7		BFIN_IRQ(93)	/* Timer 7 Interrupt */
+#define IRQ_PINT2		BFIN_IRQ(94)	/* PINT2 Interrupt */
+#define IRQ_PINT3		BFIN_IRQ(95)	/* PINT3 Interrupt */
+
+#define SYS_IRQS		IRQ_PINT3
+
+#define BFIN_PA_IRQ(x)		((x) + SYS_IRQS + 1)
+#define IRQ_PA0			BFIN_PA_IRQ(0)
+#define IRQ_PA1			BFIN_PA_IRQ(1)
+#define IRQ_PA2			BFIN_PA_IRQ(2)
+#define IRQ_PA3			BFIN_PA_IRQ(3)
+#define IRQ_PA4			BFIN_PA_IRQ(4)
+#define IRQ_PA5			BFIN_PA_IRQ(5)
+#define IRQ_PA6			BFIN_PA_IRQ(6)
+#define IRQ_PA7			BFIN_PA_IRQ(7)
+#define IRQ_PA8			BFIN_PA_IRQ(8)
+#define IRQ_PA9			BFIN_PA_IRQ(9)
+#define IRQ_PA10		BFIN_PA_IRQ(10)
+#define IRQ_PA11		BFIN_PA_IRQ(11)
+#define IRQ_PA12		BFIN_PA_IRQ(12)
+#define IRQ_PA13		BFIN_PA_IRQ(13)
+#define IRQ_PA14		BFIN_PA_IRQ(14)
+#define IRQ_PA15		BFIN_PA_IRQ(15)
+
+#define BFIN_PB_IRQ(x)		((x) + IRQ_PA15 + 1)
+#define IRQ_PB0			BFIN_PB_IRQ(0)
+#define IRQ_PB1			BFIN_PB_IRQ(1)
+#define IRQ_PB2			BFIN_PB_IRQ(2)
+#define IRQ_PB3			BFIN_PB_IRQ(3)
+#define IRQ_PB4			BFIN_PB_IRQ(4)
+#define IRQ_PB5			BFIN_PB_IRQ(5)
+#define IRQ_PB6			BFIN_PB_IRQ(6)
+#define IRQ_PB7			BFIN_PB_IRQ(7)
+#define IRQ_PB8			BFIN_PB_IRQ(8)
+#define IRQ_PB9			BFIN_PB_IRQ(9)
+#define IRQ_PB10		BFIN_PB_IRQ(10)
+#define IRQ_PB11		BFIN_PB_IRQ(11)
+#define IRQ_PB12		BFIN_PB_IRQ(12)
+#define IRQ_PB13		BFIN_PB_IRQ(13)
+#define IRQ_PB14		BFIN_PB_IRQ(14)
+#define IRQ_PB15		BFIN_PB_IRQ(15)		/* N/A */
+
+#define BFIN_PC_IRQ(x)		((x) + IRQ_PB15 + 1)
+#define IRQ_PC0			BFIN_PC_IRQ(0)
+#define IRQ_PC1			BFIN_PC_IRQ(1)
+#define IRQ_PC2			BFIN_PC_IRQ(2)
+#define IRQ_PC3			BFIN_PC_IRQ(3)
+#define IRQ_PC4			BFIN_PC_IRQ(4)
+#define IRQ_PC5			BFIN_PC_IRQ(5)
+#define IRQ_PC6			BFIN_PC_IRQ(6)
+#define IRQ_PC7			BFIN_PC_IRQ(7)
+#define IRQ_PC8			BFIN_PC_IRQ(8)
+#define IRQ_PC9			BFIN_PC_IRQ(9)
+#define IRQ_PC10		BFIN_PC_IRQ(10)
+#define IRQ_PC11		BFIN_PC_IRQ(11)
+#define IRQ_PC12		BFIN_PC_IRQ(12)
+#define IRQ_PC13		BFIN_PC_IRQ(13)
+#define IRQ_PC14		BFIN_PC_IRQ(14)		/* N/A */
+#define IRQ_PC15		BFIN_PC_IRQ(15)		/* N/A */
+
+#define BFIN_PD_IRQ(x)		((x) + IRQ_PC15 + 1)
+#define IRQ_PD0			BFIN_PD_IRQ(0)
+#define IRQ_PD1			BFIN_PD_IRQ(1)
+#define IRQ_PD2			BFIN_PD_IRQ(2)
+#define IRQ_PD3			BFIN_PD_IRQ(3)
+#define IRQ_PD4			BFIN_PD_IRQ(4)
+#define IRQ_PD5			BFIN_PD_IRQ(5)
+#define IRQ_PD6			BFIN_PD_IRQ(6)
+#define IRQ_PD7			BFIN_PD_IRQ(7)
+#define IRQ_PD8			BFIN_PD_IRQ(8)
+#define IRQ_PD9			BFIN_PD_IRQ(9)
+#define IRQ_PD10		BFIN_PD_IRQ(10)
+#define IRQ_PD11		BFIN_PD_IRQ(11)
+#define IRQ_PD12		BFIN_PD_IRQ(12)
+#define IRQ_PD13		BFIN_PD_IRQ(13)
+#define IRQ_PD14		BFIN_PD_IRQ(14)
+#define IRQ_PD15		BFIN_PD_IRQ(15)
+
+#define BFIN_PE_IRQ(x)		((x) + IRQ_PD15 + 1)
+#define IRQ_PE0			BFIN_PE_IRQ(0)
+#define IRQ_PE1			BFIN_PE_IRQ(1)
+#define IRQ_PE2			BFIN_PE_IRQ(2)
+#define IRQ_PE3			BFIN_PE_IRQ(3)
+#define IRQ_PE4			BFIN_PE_IRQ(4)
+#define IRQ_PE5			BFIN_PE_IRQ(5)
+#define IRQ_PE6			BFIN_PE_IRQ(6)
+#define IRQ_PE7			BFIN_PE_IRQ(7)
+#define IRQ_PE8			BFIN_PE_IRQ(8)
+#define IRQ_PE9			BFIN_PE_IRQ(9)
+#define IRQ_PE10		BFIN_PE_IRQ(10)
+#define IRQ_PE11		BFIN_PE_IRQ(11)
+#define IRQ_PE12		BFIN_PE_IRQ(12)
+#define IRQ_PE13		BFIN_PE_IRQ(13)
+#define IRQ_PE14		BFIN_PE_IRQ(14)
+#define IRQ_PE15		BFIN_PE_IRQ(15)
+
+#define BFIN_PF_IRQ(x)		((x) + IRQ_PE15 + 1)
+#define IRQ_PF0			BFIN_PF_IRQ(0)
+#define IRQ_PF1			BFIN_PF_IRQ(1)
+#define IRQ_PF2			BFIN_PF_IRQ(2)
+#define IRQ_PF3			BFIN_PF_IRQ(3)
+#define IRQ_PF4			BFIN_PF_IRQ(4)
+#define IRQ_PF5			BFIN_PF_IRQ(5)
+#define IRQ_PF6			BFIN_PF_IRQ(6)
+#define IRQ_PF7			BFIN_PF_IRQ(7)
+#define IRQ_PF8			BFIN_PF_IRQ(8)
+#define IRQ_PF9			BFIN_PF_IRQ(9)
+#define IRQ_PF10		BFIN_PF_IRQ(10)
+#define IRQ_PF11		BFIN_PF_IRQ(11)
+#define IRQ_PF12		BFIN_PF_IRQ(12)
+#define IRQ_PF13		BFIN_PF_IRQ(13)
+#define IRQ_PF14		BFIN_PF_IRQ(14)
+#define IRQ_PF15		BFIN_PF_IRQ(15)
+
+#define BFIN_PG_IRQ(x)		((x) + IRQ_PF15 + 1)
+#define IRQ_PG0			BFIN_PG_IRQ(0)
+#define IRQ_PG1			BFIN_PG_IRQ(1)
+#define IRQ_PG2			BFIN_PG_IRQ(2)
+#define IRQ_PG3			BFIN_PG_IRQ(3)
+#define IRQ_PG4			BFIN_PG_IRQ(4)
+#define IRQ_PG5			BFIN_PG_IRQ(5)
+#define IRQ_PG6			BFIN_PG_IRQ(6)
+#define IRQ_PG7			BFIN_PG_IRQ(7)
+#define IRQ_PG8			BFIN_PG_IRQ(8)
+#define IRQ_PG9			BFIN_PG_IRQ(9)
+#define IRQ_PG10		BFIN_PG_IRQ(10)
+#define IRQ_PG11		BFIN_PG_IRQ(11)
+#define IRQ_PG12		BFIN_PG_IRQ(12)
+#define IRQ_PG13		BFIN_PG_IRQ(13)
+#define IRQ_PG14		BFIN_PG_IRQ(14)
+#define IRQ_PG15		BFIN_PG_IRQ(15)
+
+#define BFIN_PH_IRQ(x)		((x) + IRQ_PG15 + 1)
+#define IRQ_PH0			BFIN_PH_IRQ(0)
+#define IRQ_PH1			BFIN_PH_IRQ(1)
+#define IRQ_PH2			BFIN_PH_IRQ(2)
+#define IRQ_PH3			BFIN_PH_IRQ(3)
+#define IRQ_PH4			BFIN_PH_IRQ(4)
+#define IRQ_PH5			BFIN_PH_IRQ(5)
+#define IRQ_PH6			BFIN_PH_IRQ(6)
+#define IRQ_PH7			BFIN_PH_IRQ(7)
+#define IRQ_PH8			BFIN_PH_IRQ(8)
+#define IRQ_PH9			BFIN_PH_IRQ(9)
+#define IRQ_PH10		BFIN_PH_IRQ(10)
+#define IRQ_PH11		BFIN_PH_IRQ(11)
+#define IRQ_PH12		BFIN_PH_IRQ(12)
+#define IRQ_PH13		BFIN_PH_IRQ(13)
+#define IRQ_PH14		BFIN_PH_IRQ(14)		/* N/A */
+#define IRQ_PH15		BFIN_PH_IRQ(15)		/* N/A */
+
+#define BFIN_PI_IRQ(x)		((x) + IRQ_PH15 + 1)
+#define IRQ_PI0			BFIN_PI_IRQ(0)
+#define IRQ_PI1			BFIN_PI_IRQ(1)
+#define IRQ_PI2			BFIN_PI_IRQ(2)
+#define IRQ_PI3			BFIN_PI_IRQ(3)
+#define IRQ_PI4			BFIN_PI_IRQ(4)
+#define IRQ_PI5			BFIN_PI_IRQ(5)
+#define IRQ_PI6			BFIN_PI_IRQ(6)
+#define IRQ_PI7			BFIN_PI_IRQ(7)
+#define IRQ_PI8			BFIN_PI_IRQ(8)
+#define IRQ_PI9			BFIN_PI_IRQ(9)
+#define IRQ_PI10		BFIN_PI_IRQ(10)
+#define IRQ_PI11		BFIN_PI_IRQ(11)
+#define IRQ_PI12		BFIN_PI_IRQ(12)
+#define IRQ_PI13		BFIN_PI_IRQ(13)
+#define IRQ_PI14		BFIN_PI_IRQ(14)
+#define IRQ_PI15		BFIN_PI_IRQ(15)
+
+#define BFIN_PJ_IRQ(x)		((x) + IRQ_PI15 + 1)
+#define IRQ_PJ0			BFIN_PJ_IRQ(0)
+#define IRQ_PJ1			BFIN_PJ_IRQ(1)
+#define IRQ_PJ2			BFIN_PJ_IRQ(2)
+#define IRQ_PJ3			BFIN_PJ_IRQ(3)
+#define IRQ_PJ4			BFIN_PJ_IRQ(4)
+#define IRQ_PJ5			BFIN_PJ_IRQ(5)
+#define IRQ_PJ6			BFIN_PJ_IRQ(6)
+#define IRQ_PJ7			BFIN_PJ_IRQ(7)
+#define IRQ_PJ8			BFIN_PJ_IRQ(8)
+#define IRQ_PJ9			BFIN_PJ_IRQ(9)
+#define IRQ_PJ10		BFIN_PJ_IRQ(10)
+#define IRQ_PJ11		BFIN_PJ_IRQ(11)
+#define IRQ_PJ12		BFIN_PJ_IRQ(12)
+#define IRQ_PJ13		BFIN_PJ_IRQ(13)
+#define IRQ_PJ14		BFIN_PJ_IRQ(14)		/* N/A */
+#define IRQ_PJ15		BFIN_PJ_IRQ(15)		/* N/A */
+
+#define GPIO_IRQ_BASE		IRQ_PA0
+
+#define NR_MACH_IRQS		(IRQ_PJ15 + 1)
+
+/* For compatibility reasons with existing code */
+
+#define IRQ_DMAC0_ERR		IRQ_DMAC0_ERROR
+#define IRQ_EPPI0_ERR		IRQ_EPPI0_ERROR
+#define IRQ_SPORT0_ERR		IRQ_SPORT0_ERROR
+#define IRQ_SPORT1_ERR		IRQ_SPORT1_ERROR
+#define IRQ_SPI0_ERR		IRQ_SPI0_ERROR
+#define IRQ_UART0_ERR		IRQ_UART0_ERROR
+#define IRQ_DMAC1_ERR		IRQ_DMAC1_ERROR
+#define IRQ_SPORT2_ERR		IRQ_SPORT2_ERROR
+#define IRQ_SPORT3_ERR		IRQ_SPORT3_ERROR
+#define IRQ_SPI1_ERR		IRQ_SPI1_ERROR
+#define IRQ_SPI2_ERR		IRQ_SPI2_ERROR
+#define IRQ_UART1_ERR		IRQ_UART1_ERROR
+#define IRQ_UART2_ERR		IRQ_UART2_ERROR
+#define IRQ_CAN0_ERR		IRQ_CAN0_ERROR
+#define IRQ_MXVR_ERR		IRQ_MXVR_ERROR
+#define IRQ_EPPI1_ERR		IRQ_EPPI1_ERROR
+#define IRQ_EPPI2_ERR		IRQ_EPPI2_ERROR
+#define IRQ_UART3_ERR		IRQ_UART3_ERROR
+#define IRQ_HOST_ERR		IRQ_HOST_ERROR
+#define IRQ_PIXC_ERR		IRQ_PIXC_ERROR
+#define IRQ_NFC_ERR		IRQ_NFC_ERROR
+#define IRQ_ATAPI_ERR		IRQ_ATAPI_ERROR
+#define IRQ_CAN1_ERR		IRQ_CAN1_ERROR
+#define IRQ_HS_DMA_ERR		IRQ_HS_DMA_ERROR
+
+/* IAR0 BIT FIELDS */
+#define IRQ_PLL_WAKEUP_POS	0
+#define IRQ_DMAC0_ERR_POS	4
+#define IRQ_EPPI0_ERR_POS	8
+#define IRQ_SPORT0_ERR_POS	12
+#define IRQ_SPORT1_ERR_POS	16
+#define IRQ_SPI0_ERR_POS	20
+#define IRQ_UART0_ERR_POS	24
+#define IRQ_RTC_POS		28
+
+/* IAR1 BIT FIELDS */
+#define IRQ_EPPI0_POS		0
+#define IRQ_SPORT0_RX_POS	4
+#define IRQ_SPORT0_TX_POS	8
+#define IRQ_SPORT1_RX_POS	12
+#define IRQ_SPORT1_TX_POS	16
+#define IRQ_SPI0_POS		20
+#define IRQ_UART0_RX_POS	24
+#define IRQ_UART0_TX_POS	28
+
+/* IAR2 BIT FIELDS */
+#define IRQ_TIMER8_POS		0
+#define IRQ_TIMER9_POS		4
+#define IRQ_TIMER10_POS		8
+#define IRQ_PINT0_POS		12
+#define IRQ_PINT1_POS		16
+#define IRQ_MDMAS0_POS		20
+#define IRQ_MDMAS1_POS		24
+#define IRQ_WATCH_POS		28
+
+/* IAR3 BIT FIELDS */
+#define IRQ_DMAC1_ERR_POS	0
+#define IRQ_SPORT2_ERR_POS	4
+#define IRQ_SPORT3_ERR_POS	8
+#define IRQ_MXVR_DATA_POS	12
+#define IRQ_SPI1_ERR_POS	16
+#define IRQ_SPI2_ERR_POS	20
+#define IRQ_UART1_ERR_POS	24
+#define IRQ_UART2_ERR_POS	28
+
+/* IAR4 BIT FILEDS */
+#define IRQ_CAN0_ERR_POS	0
+#define IRQ_SPORT2_RX_POS	4
+#define IRQ_UART2_RX_POS	4
+#define IRQ_SPORT2_TX_POS	8
+#define IRQ_UART2_TX_POS	8
+#define IRQ_SPORT3_RX_POS	12
+#define IRQ_UART3_RX_POS	12
+#define IRQ_SPORT3_TX_POS	16
+#define IRQ_UART3_TX_POS	16
+#define IRQ_EPPI1_POS		20
+#define IRQ_EPPI2_POS		24
+#define IRQ_SPI1_POS		28
+
+/* IAR5 BIT FIELDS */
+#define IRQ_SPI2_POS		0
+#define IRQ_UART1_RX_POS	4
+#define IRQ_UART1_TX_POS	8
+#define IRQ_ATAPI_RX_POS	12
+#define IRQ_ATAPI_TX_POS	16
+#define IRQ_TWI0_POS		20
+#define IRQ_TWI1_POS		24
+#define IRQ_CAN0_RX_POS		28
+
+/* IAR6 BIT FIELDS */
+#define IRQ_CAN0_TX_POS		0
+#define IRQ_MDMAS2_POS		4
+#define IRQ_MDMAS3_POS		8
+#define IRQ_MXVR_ERR_POS	12
+#define IRQ_MXVR_MSG_POS	16
+#define IRQ_MXVR_PKT_POS	20
+#define IRQ_EPPI1_ERR_POS	24
+#define IRQ_EPPI2_ERR_POS	28
+
+/* IAR7 BIT FIELDS */
+#define IRQ_UART3_ERR_POS	0
+#define IRQ_HOST_ERR_POS	4
+#define IRQ_PIXC_ERR_POS	12
+#define IRQ_NFC_ERR_POS		16
+#define IRQ_ATAPI_ERR_POS	20
+#define IRQ_CAN1_ERR_POS	24
+#define IRQ_HS_DMA_ERR_POS	28
+
+/* IAR8 BIT FIELDS */
+#define IRQ_PIXC_IN0_POS	0
+#define IRQ_PIXC_IN1_POS	4
+#define IRQ_PIXC_OUT_POS	8
+#define IRQ_SDH_POS		12
+#define IRQ_CNT_POS		16
+#define IRQ_KEY_POS		20
+#define IRQ_CAN1_RX_POS		24
+#define IRQ_CAN1_TX_POS		28
+
+/* IAR9 BIT FIELDS */
+#define IRQ_SDH_MASK0_POS	0
+#define IRQ_SDH_MASK1_POS	4
+#define IRQ_USB_INT0_POS	12
+#define IRQ_USB_INT1_POS	16
+#define IRQ_USB_INT2_POS	20
+#define IRQ_USB_DMA_POS		24
+#define IRQ_OTPSEC_POS		28
+
+/* IAR10 BIT FIELDS */
+#define IRQ_TIMER0_POS		24
+#define IRQ_TIMER1_POS		28
+
+/* IAR11 BIT FIELDS */
+#define IRQ_TIMER2_POS		0
+#define IRQ_TIMER3_POS		4
+#define IRQ_TIMER4_POS		8
+#define IRQ_TIMER5_POS		12
+#define IRQ_TIMER6_POS		16
+#define IRQ_TIMER7_POS		20
+#define IRQ_PINT2_POS		24
+#define IRQ_PINT3_POS		28
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+/*
+ * gpio pint registers layout
+ */
+struct bfin_pint_regs {
+	u32 mask_set;
+	u32 mask_clear;
+	u32 request;
+	u32 assign;
+	u32 edge_set;
+	u32 edge_clear;
+	u32 invert_set;
+	u32 invert_clear;
+	u32 pinstate;
+	u32 latch;
+	u32 __pad0[2];
+};
+
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/mem_map.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/mem_map.h
new file mode 100644
index 0000000..caac2df
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/mem_map.h
@@ -0,0 +1,84 @@
+/*
+ * BF548 memory map
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
+
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0x2C000000	 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x04000000	/* 64M */
+#define ASYNC_BANK2_BASE	0x28000000	 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x04000000	/* 64M */
+#define ASYNC_BANK1_BASE	0x24000000	 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x04000000	/* 64M */
+#define ASYNC_BANK0_BASE	0x20000000	 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x04000000	/* 64M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x1000
+
+/* L1 Instruction ROM */
+
+#define L1_ROM_START		0xFFA14000
+#define L1_ROM_LENGTH		0x10000
+
+/* Level 1 Memory */
+
+/* Memory Map for ADSP-BF548 processors */
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
+#else
+#define BFIN_ICACHESIZE	(0*1024)
+#endif
+
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#define L1_CODE_LENGTH      0xC000
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+
+/* Level 2 Memory */
+#define L2_START            0xFEB00000
+#if defined(CONFIG_BF542)
+# define L2_LENGTH          0
+#elif defined(CONFIG_BF544)
+# define L2_LENGTH          0x10000
+#else
+# define L2_LENGTH          0x20000
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/pll.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/pll.h
new file mode 100644
index 0000000..94cca67
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/pll.h
@@ -0,0 +1 @@
+#include <mach-common/pll.h>
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/portmux.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/portmux.h
new file mode 100644
index 0000000..d9f8632
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/include/mach/portmux.h
@@ -0,0 +1,318 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define P_SPORT2_TFS	(P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0))
+#define P_SPORT2_DTSEC	(P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0))
+#define P_SPORT2_DTPRI	(P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0))
+#define P_SPORT2_TSCLK	(P_DEFINED | P_IDENT(GPIO_PA3) | P_FUNCT(0))
+#define P_SPORT2_RFS	(P_DEFINED | P_IDENT(GPIO_PA4) | P_FUNCT(0))
+#define P_SPORT2_DRSEC	(P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(0))
+#define P_SPORT2_DRPRI	(P_DEFINED | P_IDENT(GPIO_PA6) | P_FUNCT(0))
+#define P_SPORT2_RSCLK	(P_DEFINED | P_IDENT(GPIO_PA7) | P_FUNCT(0))
+#define P_SPORT3_TFS	(P_DEFINED | P_IDENT(GPIO_PA8) | P_FUNCT(0))
+#define P_SPORT3_DTSEC	(P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(0))
+#define P_SPORT3_DTPRI	(P_DEFINED | P_IDENT(GPIO_PA10) | P_FUNCT(0))
+#define P_SPORT3_TSCLK	(P_DEFINED | P_IDENT(GPIO_PA11) | P_FUNCT(0))
+#define P_SPORT3_RFS	(P_DEFINED | P_IDENT(GPIO_PA12) | P_FUNCT(0))
+#define P_SPORT3_DRSEC	(P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(0))
+#define P_SPORT3_DRPRI	(P_DEFINED | P_IDENT(GPIO_PA14) | P_FUNCT(0))
+#define P_SPORT3_RSCLK	(P_DEFINED | P_IDENT(GPIO_PA15) | P_FUNCT(0))
+#define P_TMR4	(P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(1))
+#define P_TMR5	(P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(1))
+#define P_TMR6	(P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(1))
+#define P_TMR7	(P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(1))
+
+#define P_TWI1_SCL	(P_DEFINED | P_IDENT(GPIO_PB0) | P_FUNCT(0))
+#define P_TWI1_SDA	(P_DEFINED | P_IDENT(GPIO_PB1) | P_FUNCT(0))
+#define P_UART3_RTS	(P_DEFINED | P_IDENT(GPIO_PB2) | P_FUNCT(0))
+#define P_UART3_CTS	(P_DEFINED | P_IDENT(GPIO_PB3) | P_FUNCT(0))
+#define P_UART2_TX	(P_DEFINED | P_IDENT(GPIO_PB4) | P_FUNCT(0))
+#define P_UART2_RX	(P_DEFINED | P_IDENT(GPIO_PB5) | P_FUNCT(0))
+#define P_UART3_TX	(P_DEFINED | P_IDENT(GPIO_PB6) | P_FUNCT(0))
+#define P_UART3_RX	(P_DEFINED | P_IDENT(GPIO_PB7) | P_FUNCT(0))
+#define P_SPI2_SS	(P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(0))
+#define P_SPI2_SSEL1	(P_DEFINED | P_IDENT(GPIO_PB9) | P_FUNCT(0))
+#define P_SPI2_SSEL2	(P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(0))
+#define P_SPI2_SSEL3	(P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(0))
+#define P_SPI2_SCK	(P_DEFINED | P_IDENT(GPIO_PB12) | P_FUNCT(0))
+#define P_SPI2_MOSI	(P_DEFINED | P_IDENT(GPIO_PB13) | P_FUNCT(0))
+#define P_SPI2_MISO	(P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(0))
+#define P_TMR0	(P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(1))
+#define P_TMR1	(P_DEFINED | P_IDENT(GPIO_PB9) | P_FUNCT(1))
+#define P_TMR2	(P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(1))
+#define P_TMR3	(P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(1))
+
+#define P_SPORT0_TFS	(P_DEFINED | P_IDENT(GPIO_PC0) | P_FUNCT(0))
+#define P_SPORT0_DTSEC	(P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(0))
+#define P_SPORT0_DTPRI	(P_DEFINED | P_IDENT(GPIO_PC2) | P_FUNCT(0))
+#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(GPIO_PC3) | P_FUNCT(0))
+#define P_SPORT0_RFS	(P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(0))
+#define P_SPORT0_DRSEC	(P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(0))
+#define P_SPORT0_DRPRI	(P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0))
+#define P_SPORT0_RSCLK	(P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0))
+#define P_SD_D0	(P_DEFINED | P_IDENT(GPIO_PC8) | P_FUNCT(0))
+#define P_SD_D1	(P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0))
+#define P_SD_D2	(P_DEFINED | P_IDENT(GPIO_PC10) | P_FUNCT(0))
+#define P_SD_D3	(P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(0))
+#define P_SD_CLK	(P_DEFINED | P_IDENT(GPIO_PC12) | P_FUNCT(0))
+#define P_SD_CMD	(P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(0))
+#define P_MMCLK	(P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(1))
+#define P_MBCLK	(P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(1))
+
+#define P_PPI1_D0	(P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(0))
+#define P_PPI1_D1	(P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(0))
+#define P_PPI1_D2	(P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(0))
+#define P_PPI1_D3	(P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(0))
+#define P_PPI1_D4	(P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(0))
+#define P_PPI1_D5	(P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(0))
+#define P_PPI1_D6	(P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(0))
+#define P_PPI1_D7	(P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(0))
+#define P_PPI1_D8	(P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(0))
+#define P_PPI1_D9	(P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(0))
+#define P_PPI1_D10	(P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(0))
+#define P_PPI1_D11	(P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(0))
+#define P_PPI1_D12	(P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(0))
+#define P_PPI1_D13	(P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(0))
+#define P_PPI1_D14	(P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(0))
+#define P_PPI1_D15	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(0))
+
+#define P_HOST_D8	(P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(1))
+#define P_HOST_D9	(P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(1))
+#define P_HOST_D10	(P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(1))
+#define P_HOST_D11	(P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(1))
+#define P_HOST_D12	(P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(1))
+#define P_HOST_D13	(P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(1))
+#define P_HOST_D14	(P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(1))
+#define P_HOST_D15	(P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(1))
+#define P_HOST_D0	(P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(1))
+#define P_HOST_D1	(P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(1))
+#define P_HOST_D2	(P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(1))
+#define P_HOST_D3	(P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(1))
+#define P_HOST_D4	(P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(1))
+#define P_HOST_D5	(P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(1))
+#define P_HOST_D6	(P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(1))
+#define P_HOST_D7	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(1))
+#define P_SPORT1_TFS	(P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(2))
+#define P_SPORT1_DTSEC	(P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(2))
+#define P_SPORT1_DTPRI	(P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(2))
+#define P_SPORT1_TSCLK	(P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(2))
+#define P_SPORT1_RFS	(P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(2))
+#define P_SPORT1_DRSEC	(P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(2))
+#define P_SPORT1_DRPRI	(P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(2))
+#define P_SPORT1_RSCLK	(P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(2))
+#define P_PPI2_D0	(P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(2))
+#define P_PPI2_D1	(P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(2))
+#define P_PPI2_D2	(P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(2))
+#define P_PPI2_D3	(P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(2))
+#define P_PPI2_D4	(P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(2))
+#define P_PPI2_D5	(P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(2))
+#define P_PPI2_D6	(P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(2))
+#define P_PPI2_D7	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(2))
+#define P_PPI0_D18	(P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(3))
+#define P_PPI0_D19	(P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(3))
+#define P_PPI0_D20	(P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(3))
+#define P_PPI0_D21	(P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(3))
+#define P_PPI0_D22	(P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(3))
+#define P_PPI0_D23	(P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(3))
+#define P_KEY_ROW0	(P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(3))
+#define P_KEY_ROW1	(P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(3))
+#define P_KEY_ROW2	(P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(3))
+#define P_KEY_ROW3	(P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(3))
+#define P_KEY_COL0	(P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(3))
+#define P_KEY_COL1	(P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(3))
+#define P_KEY_COL2	(P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3))
+#define P_KEY_COL3	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3))
+
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PE4
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
+#define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0))
+#define P_SPI0_MISO	(P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0))
+#define P_SPI0_MOSI	(P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0))
+#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(0))
+#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(0))
+#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(0))
+#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(0))
+#define P_UART0_TX	(P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(0))
+#define P_UART0_RX	(P_DEFINED | P_IDENT(GPIO_PE8) | P_FUNCT(0))
+#define P_UART1_RTS	(P_DEFINED | P_IDENT(GPIO_PE9) | P_FUNCT(0))
+#define P_UART1_CTS	(P_DEFINED | P_IDENT(GPIO_PE10) | P_FUNCT(0))
+#define P_PPI1_CLK	(P_DEFINED | P_IDENT(GPIO_PE11) | P_FUNCT(0))
+#define P_PPI1_FS1	(P_DEFINED | P_IDENT(GPIO_PE12) | P_FUNCT(0))
+#define P_PPI1_FS2	(P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(0))
+#define P_TWI0_SCL	(P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(0))
+#define P_TWI0_SDA	(P_DEFINED | P_IDENT(GPIO_PE15) | P_FUNCT(0))
+#define P_KEY_COL7	(P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(1))
+#define P_KEY_ROW6	(P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(1))
+#define P_KEY_COL6	(P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(1))
+#define P_KEY_ROW5	(P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(1))
+#define P_KEY_COL5	(P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(1))
+#define P_KEY_ROW4	(P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(1))
+#define P_KEY_COL4	(P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(1))
+#define P_KEY_ROW7	(P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(1))
+
+#define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
+#define P_PPI0_D1	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
+#define P_PPI0_D2	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
+#define P_PPI0_D3	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0))
+#define P_PPI0_D4	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0))
+#define P_PPI0_D5	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0))
+#define P_PPI0_D6	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0))
+#define P_PPI0_D7	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
+#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0))
+#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0))
+#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0))
+#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0))
+#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0))
+#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
+#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
+#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
+
+#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT
+# define P_ATAPI_D0A	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+# define P_ATAPI_D1A	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+# define P_ATAPI_D2A	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+# define P_ATAPI_D3A	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+# define P_ATAPI_D4A	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+# define P_ATAPI_D5A	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+# define P_ATAPI_D6A	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+# define P_ATAPI_D7A	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+# define P_ATAPI_D8A	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+# define P_ATAPI_D9A	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+# define P_ATAPI_D10A	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
+# define P_ATAPI_D11A	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
+# define P_ATAPI_D12A	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
+# define P_ATAPI_D13A	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
+# define P_ATAPI_D14A	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+# define P_ATAPI_D15A	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+#else
+# define P_ATAPI_D0A	(P_DONTCARE)
+# define P_ATAPI_D1A	(P_DONTCARE)
+# define P_ATAPI_D2A	(P_DONTCARE)
+# define P_ATAPI_D3A	(P_DONTCARE)
+# define P_ATAPI_D4A	(P_DONTCARE)
+# define P_ATAPI_D5A	(P_DONTCARE)
+# define P_ATAPI_D6A	(P_DONTCARE)
+# define P_ATAPI_D7A	(P_DONTCARE)
+# define P_ATAPI_D8A	(P_DONTCARE)
+# define P_ATAPI_D9A	(P_DONTCARE)
+# define P_ATAPI_D10A	(P_DONTCARE)
+# define P_ATAPI_D11A	(P_DONTCARE)
+# define P_ATAPI_D12A	(P_DONTCARE)
+# define P_ATAPI_D13A	(P_DONTCARE)
+# define P_ATAPI_D14A	(P_DONTCARE)
+# define P_ATAPI_D15A	(P_DONTCARE)
+#endif
+
+#define P_PPI0_CLK	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
+#define P_PPI0_FS1	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+#define P_PPI0_FS2	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0))
+#define P_PPI0_D16	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
+#define P_PPI0_D17	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))
+#define P_SPI1_SSEL1	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_SPI1_SSEL2	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_SPI1_SSEL3	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0))
+#define P_SPI1_SCK	(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0))
+#define P_SPI1_MISO	(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0))
+#define P_SPI1_MOSI	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0))
+#define P_SPI1_SS	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0))
+#define P_CAN0_TX	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0))
+#define P_CAN0_RX	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
+#define P_CAN1_TX	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
+#define P_CAN1_RX	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
+#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT
+# define P_ATAPI_A0A	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1))
+# define P_ATAPI_A1A	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1))
+# define P_ATAPI_A2A	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
+#else
+# define P_ATAPI_A0A	(P_DONTCARE)
+# define P_ATAPI_A1A	(P_DONTCARE)
+# define P_ATAPI_A2A	(P_DONTCARE)
+#endif
+#define P_HOST_CE	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1))
+#define P_HOST_RD	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1))
+#define P_HOST_WR	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1))
+#define P_MTXONB	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_PPI2_FS2	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(2))
+#define P_PPI2_FS1	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2))
+#define P_PPI2_CLK	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2))
+#define P_CNT_CZM	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(3))
+
+#define P_UART1_TX	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0))
+#define P_UART1_RX	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0))
+#define P_ATAPI_RESET	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0))
+#define P_HOST_ADDR	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0))
+#define P_HOST_ACK	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0))
+#define P_MTX	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0))
+#define P_MRX	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0))
+#define P_MRXONB	(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0))
+#define P_A4	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0))
+#define P_A5	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0))
+#define P_A6	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0))
+#define P_A7	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0))
+#define P_A8	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0))
+#define P_A9	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0))
+#define P_PPI1_FS3	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1))
+#define P_PPI2_FS3	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1))
+#define P_TMR8	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1))
+#define P_TMR9	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(1))
+#define P_TMR10	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1))
+#define P_DMAR0	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1))
+#define P_DMAR1	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1))
+#define P_PPI0_FS3	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(2))
+#define P_CNT_CDG	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(2))
+#define P_CNT_CUD	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2))
+
+#define P_A10	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI0) | P_FUNCT(0))
+#define P_A11	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI1) | P_FUNCT(0))
+#define P_A12	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI2) | P_FUNCT(0))
+#define P_A13	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI3) | P_FUNCT(0))
+#define P_A14	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI4) | P_FUNCT(0))
+#define P_A15	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI5) | P_FUNCT(0))
+#define P_A16	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI6) | P_FUNCT(0))
+#define P_A17	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI7) | P_FUNCT(0))
+#define P_A18	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI8) | P_FUNCT(0))
+#define P_A19	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI9) | P_FUNCT(0))
+#define P_A20	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI10) | P_FUNCT(0))
+#define P_A21	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI11) | P_FUNCT(0))
+#define P_A22	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI12) | P_FUNCT(0))
+#define P_A23	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI13) | P_FUNCT(0))
+#define P_A24	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI14) | P_FUNCT(0))
+#define P_A25	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI15) | P_FUNCT(0))
+#define P_NOR_CLK	(P_DEFINED | P_IDENT(GPIO_PI15) | P_FUNCT(1))
+
+#define P_AMC_ARDY_NOR_WAIT	(P_DEFINED | P_IDENT(GPIO_PJ0) | P_FUNCT(0))
+#define P_NAND_CE	(P_DEFINED | P_IDENT(GPIO_PJ1) | P_FUNCT(0))
+#define P_NAND_RB	(P_DEFINED | P_IDENT(GPIO_PJ2) | P_FUNCT(0))
+#define P_ATAPI_DIOR	(P_DEFINED | P_IDENT(GPIO_PJ3) | P_FUNCT(0))
+#define P_ATAPI_DIOW	(P_DEFINED | P_IDENT(GPIO_PJ4) | P_FUNCT(0))
+#define P_ATAPI_CS0	(P_DEFINED | P_IDENT(GPIO_PJ5) | P_FUNCT(0))
+#define P_ATAPI_CS1	(P_DEFINED | P_IDENT(GPIO_PJ6) | P_FUNCT(0))
+#define P_ATAPI_DMACK	(P_DEFINED | P_IDENT(GPIO_PJ7) | P_FUNCT(0))
+#define P_ATAPI_DMARQ	(P_DEFINED | P_IDENT(GPIO_PJ8) | P_FUNCT(0))
+#define P_ATAPI_INTRQ	(P_DEFINED | P_IDENT(GPIO_PJ9) | P_FUNCT(0))
+#define P_ATAPI_IORDY	(P_DEFINED | P_IDENT(GPIO_PJ10) | P_FUNCT(0))
+#define P_AMC_BR	(P_DEFINED | P_IDENT(GPIO_PJ11) | P_FUNCT(0))
+#define P_AMC_BG	(P_DEFINED | P_IDENT(GPIO_PJ12) | P_FUNCT(0))
+#define P_AMC_BGH	(P_DEFINED | P_IDENT(GPIO_PJ13) | P_FUNCT(0))
+
+
+#define P_NAND_D0	(P_DONTCARE)
+#define P_NAND_D1	(P_DONTCARE)
+#define P_NAND_D2	(P_DONTCARE)
+#define P_NAND_D3	(P_DONTCARE)
+#define P_NAND_D4	(P_DONTCARE)
+#define P_NAND_D5	(P_DONTCARE)
+#define P_NAND_D6	(P_DONTCARE)
+#define P_NAND_D7	(P_DONTCARE)
+#define P_NAND_WE	(P_DONTCARE)
+#define P_NAND_RE	(P_DONTCARE)
+#define P_NAND_CLE	(P_DONTCARE)
+#define P_NAND_ALE	(P_DONTCARE)
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/ints-priority.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/ints-priority.c
new file mode 100644
index 0000000..48dd3a4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf548/ints-priority.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ * Set up the interrupt priorities
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <asm/blackfin.h>
+
+void __init program_IAR(void)
+{
+	/* Program the IAR0 Register with the configured priority */
+	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
+			    ((CONFIG_IRQ_DMAC0_ERR - 7) << IRQ_DMAC0_ERR_POS) |
+			    ((CONFIG_IRQ_EPPI0_ERR - 7) << IRQ_EPPI0_ERR_POS) |
+			    ((CONFIG_IRQ_SPORT0_ERR - 7) << IRQ_SPORT0_ERR_POS) |
+			    ((CONFIG_IRQ_SPORT1_ERR - 7) << IRQ_SPORT1_ERR_POS) |
+			    ((CONFIG_IRQ_SPI0_ERR - 7) << IRQ_SPI0_ERR_POS) |
+			    ((CONFIG_IRQ_UART0_ERR - 7) << IRQ_UART0_ERR_POS) |
+			    ((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS));
+
+	bfin_write_SIC_IAR1(((CONFIG_IRQ_EPPI0 - 7) << IRQ_EPPI0_POS) |
+			    ((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) |
+			    ((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) |
+			    ((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS) |
+			    ((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) |
+			    ((CONFIG_IRQ_SPI0 - 7) << IRQ_SPI0_POS) |
+			    ((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) |
+			    ((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS));
+
+	bfin_write_SIC_IAR2(((CONFIG_IRQ_TIMER8 - 7) << IRQ_TIMER8_POS) |
+			    ((CONFIG_IRQ_TIMER9 - 7) << IRQ_TIMER9_POS) |
+			    ((CONFIG_IRQ_PINT0 - 7) << IRQ_PINT0_POS) |
+			    ((CONFIG_IRQ_PINT1 - 7) << IRQ_PINT1_POS) |
+			    ((CONFIG_IRQ_MDMAS0 - 7) << IRQ_MDMAS0_POS) |
+			    ((CONFIG_IRQ_MDMAS1 - 7) << IRQ_MDMAS1_POS) |
+			    ((CONFIG_IRQ_WATCHDOG - 7) << IRQ_WATCH_POS));
+
+	bfin_write_SIC_IAR3(((CONFIG_IRQ_DMAC1_ERR - 7) << IRQ_DMAC1_ERR_POS) |
+			    ((CONFIG_IRQ_SPORT2_ERR - 7) << IRQ_SPORT2_ERR_POS) |
+			    ((CONFIG_IRQ_SPORT3_ERR - 7) << IRQ_SPORT3_ERR_POS) |
+			    ((CONFIG_IRQ_MXVR_DATA - 7) << IRQ_MXVR_DATA_POS) |
+			    ((CONFIG_IRQ_SPI1_ERR - 7) << IRQ_SPI1_ERR_POS) |
+			    ((CONFIG_IRQ_SPI2_ERR - 7) << IRQ_SPI2_ERR_POS) |
+			    ((CONFIG_IRQ_UART1_ERR - 7) << IRQ_UART1_ERR_POS) |
+			    ((CONFIG_IRQ_UART2_ERR - 7) << IRQ_UART2_ERR_POS));
+
+	bfin_write_SIC_IAR4(((CONFIG_IRQ_CAN0_ERR - 7) << IRQ_CAN0_ERR_POS) |
+			    ((CONFIG_IRQ_SPORT2_RX - 7) << IRQ_SPORT2_RX_POS) |
+			    ((CONFIG_IRQ_SPORT2_TX - 7) << IRQ_SPORT2_TX_POS) |
+			    ((CONFIG_IRQ_SPORT3_RX - 7) << IRQ_SPORT3_RX_POS) |
+			    ((CONFIG_IRQ_SPORT3_TX - 7) << IRQ_SPORT3_TX_POS) |
+			    ((CONFIG_IRQ_EPPI1 - 7) << IRQ_EPPI1_POS) |
+			    ((CONFIG_IRQ_EPPI2 - 7) << IRQ_EPPI2_POS) |
+			    ((CONFIG_IRQ_SPI1 - 7) << IRQ_SPI1_POS));
+
+	bfin_write_SIC_IAR5(((CONFIG_IRQ_SPI2 - 7) << IRQ_SPI2_POS) |
+			    ((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) |
+			    ((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) |
+			    ((CONFIG_IRQ_ATAPI_RX - 7) << IRQ_ATAPI_RX_POS) |
+			    ((CONFIG_IRQ_ATAPI_TX - 7) << IRQ_ATAPI_TX_POS) |
+			    ((CONFIG_IRQ_TWI0 - 7) << IRQ_TWI0_POS) |
+			    ((CONFIG_IRQ_TWI1 - 7) << IRQ_TWI1_POS) |
+			    ((CONFIG_IRQ_CAN0_RX - 7) << IRQ_CAN0_RX_POS));
+
+	bfin_write_SIC_IAR6(((CONFIG_IRQ_CAN0_TX - 7) << IRQ_CAN0_TX_POS) |
+			    ((CONFIG_IRQ_MDMAS2 - 7) << IRQ_MDMAS2_POS) |
+			    ((CONFIG_IRQ_MDMAS3 - 7) << IRQ_MDMAS3_POS) |
+			    ((CONFIG_IRQ_MXVR_ERR - 7) << IRQ_MXVR_ERR_POS) |
+			    ((CONFIG_IRQ_MXVR_MSG - 7) << IRQ_MXVR_MSG_POS) |
+			    ((CONFIG_IRQ_MXVR_PKT - 7) << IRQ_MXVR_PKT_POS) |
+			    ((CONFIG_IRQ_EPPI1_ERR - 7) << IRQ_EPPI1_ERR_POS) |
+			    ((CONFIG_IRQ_EPPI2_ERR - 7) << IRQ_EPPI2_ERR_POS));
+
+	bfin_write_SIC_IAR7(((CONFIG_IRQ_UART3_ERR - 7) << IRQ_UART3_ERR_POS) |
+			    ((CONFIG_IRQ_HOST_ERR - 7) << IRQ_HOST_ERR_POS) |
+			    ((CONFIG_IRQ_PIXC_ERR - 7) << IRQ_PIXC_ERR_POS) |
+			    ((CONFIG_IRQ_NFC_ERR - 7) << IRQ_NFC_ERR_POS) |
+			    ((CONFIG_IRQ_ATAPI_ERR - 7) << IRQ_ATAPI_ERR_POS) |
+			    ((CONFIG_IRQ_CAN1_ERR - 7) << IRQ_CAN1_ERR_POS) |
+			    ((CONFIG_IRQ_HS_DMA_ERR - 7) << IRQ_HS_DMA_ERR_POS));
+
+	bfin_write_SIC_IAR8(((CONFIG_IRQ_PIXC_IN0 - 7) << IRQ_PIXC_IN1_POS) |
+			    ((CONFIG_IRQ_PIXC_IN1 - 7) << IRQ_PIXC_IN1_POS) |
+			    ((CONFIG_IRQ_PIXC_OUT - 7) << IRQ_PIXC_OUT_POS) |
+			    ((CONFIG_IRQ_SDH - 7) << IRQ_SDH_POS) |
+			    ((CONFIG_IRQ_CNT - 7) << IRQ_CNT_POS) |
+			    ((CONFIG_IRQ_KEY - 7) << IRQ_KEY_POS) |
+			    ((CONFIG_IRQ_CAN1_RX - 7) << IRQ_CAN1_RX_POS) |
+			    ((CONFIG_IRQ_CAN1_TX - 7) << IRQ_CAN1_TX_POS));
+
+	bfin_write_SIC_IAR9(((CONFIG_IRQ_SDH_MASK0 - 7) << IRQ_SDH_MASK0_POS) |
+			    ((CONFIG_IRQ_SDH_MASK1 - 7) << IRQ_SDH_MASK1_POS) |
+			    ((CONFIG_IRQ_USB_INT0 - 7) << IRQ_USB_INT0_POS) |
+			    ((CONFIG_IRQ_USB_INT1 - 7) << IRQ_USB_INT1_POS) |
+			    ((CONFIG_IRQ_USB_INT2 - 7) << IRQ_USB_INT2_POS) |
+			    ((CONFIG_IRQ_USB_DMA - 7) << IRQ_USB_DMA_POS) |
+			    ((CONFIG_IRQ_OTPSEC - 7) << IRQ_OTPSEC_POS));
+
+	bfin_write_SIC_IAR10(((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
+			     ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS));
+
+	bfin_write_SIC_IAR11(((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
+			     ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
+			     ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS) |
+			     ((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
+			     ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
+			     ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) |
+			     ((CONFIG_IRQ_PINT2 - 7) << IRQ_PINT2_POS) |
+			     ((CONFIG_IRQ_PINT3 - 7) << IRQ_PINT3_POS));
+
+	SSYNC();
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/Kconfig
new file mode 100644
index 0000000..059c3cb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/Kconfig
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: GPL-2.0
+if (BF561)
+
+source "arch/blackfin/mach-bf561/boards/Kconfig"
+
+menu "BF561 Specific Configuration"
+
+if (!SMP)
+
+comment "Core B Support"
+
+config BF561_COREB
+	bool "Enable Core B loader"
+	default y
+
+endif
+
+comment "Interrupt Priority Assignment"
+
+menu "Priority"
+
+config IRQ_PLL_WAKEUP
+	int "PLL Wakeup Interrupt"
+	default 7
+config IRQ_DMA1_ERROR
+	int "DMA1 Error (generic)"
+	default 7
+config IRQ_DMA2_ERROR
+	int "DMA2 Error (generic)"
+	default 7
+config IRQ_IMDMA_ERROR
+	int "IMDMA Error (generic)"
+	default 7
+config IRQ_PPI0_ERROR
+	int "PPI0 Error Interrupt"
+	default 7
+config IRQ_PPI1_ERROR
+	int "PPI1 Error Interrupt"
+	default 7
+config IRQ_SPORT0_ERROR
+	int "SPORT0 Error Interrupt"
+	default 7
+config IRQ_SPORT1_ERROR
+	int "SPORT1 Error Interrupt"
+	default 7
+config IRQ_SPI_ERROR
+	int "SPI Error Interrupt"
+	default 7
+config IRQ_UART_ERROR
+	int "UART Error Interrupt"
+	default 7
+config IRQ_RESERVED_ERROR
+	int "Reserved Interrupt"
+	default 7
+config IRQ_DMA1_0
+	int "DMA1 0  Interrupt(PPI1)"
+	default 8
+config IRQ_DMA1_1
+	int "DMA1 1  Interrupt(PPI2)"
+	default 8
+config IRQ_DMA1_2
+	int "DMA1 2  Interrupt"
+	default 8
+config IRQ_DMA1_3
+	int "DMA1 3  Interrupt"
+	default 8
+config IRQ_DMA1_4
+	int "DMA1 4  Interrupt"
+	default 8
+config IRQ_DMA1_5
+	int "DMA1 5  Interrupt"
+	default 8
+config IRQ_DMA1_6
+	int "DMA1 6  Interrupt"
+	default 8
+config IRQ_DMA1_7
+	int "DMA1 7  Interrupt"
+	default 8
+config IRQ_DMA1_8
+	int "DMA1 8  Interrupt"
+	default 8
+config IRQ_DMA1_9
+	int "DMA1 9  Interrupt"
+	default 8
+config IRQ_DMA1_10
+	int "DMA1 10 Interrupt"
+	default 8
+config IRQ_DMA1_11
+	int "DMA1 11 Interrupt"
+	default 8
+config IRQ_DMA2_0
+	int "DMA2 0  (SPORT0 RX)"
+	default 9
+config IRQ_DMA2_1
+	int "DMA2 1  (SPORT0 TX)"
+	default 9
+config IRQ_DMA2_2
+	int "DMA2 2  (SPORT1 RX)"
+	default 9
+config IRQ_DMA2_3
+	int "DMA2 3  (SPORT2 TX)"
+	default 9
+config IRQ_DMA2_4
+	int "DMA2 4  (SPI)"
+	default 9
+config IRQ_DMA2_5
+	int "DMA2 5  (UART RX)"
+	default 9
+config IRQ_DMA2_6
+	int "DMA2 6  (UART TX)"
+	default 9
+config IRQ_DMA2_7
+	int "DMA2 7  Interrupt"
+	default 9
+config IRQ_DMA2_8
+	int "DMA2 8  Interrupt"
+	default 9
+config IRQ_DMA2_9
+	int "DMA2 9  Interrupt"
+	default 9
+config IRQ_DMA2_10
+	int "DMA2 10 Interrupt"
+	default 9
+config IRQ_DMA2_11
+	int "DMA2 11 Interrupt"
+	default 9
+config IRQ_TIMER0
+	int "TIMER 0  Interrupt"
+	default 7 if TICKSOURCE_GPTMR0
+	default 8
+config IRQ_TIMER1
+	int "TIMER 1  Interrupt"
+	default 10
+config IRQ_TIMER2
+	int "TIMER 2  Interrupt"
+	default 10
+config IRQ_TIMER3
+	int "TIMER 3  Interrupt"
+	default 10
+config IRQ_TIMER4
+	int "TIMER 4  Interrupt"
+	default 10
+config IRQ_TIMER5
+	int "TIMER 5  Interrupt"
+	default 10
+config IRQ_TIMER6
+	int "TIMER 6  Interrupt"
+	default 10
+config IRQ_TIMER7
+	int "TIMER 7  Interrupt"
+	default 10
+config IRQ_TIMER8
+	int "TIMER 8  Interrupt"
+	default 10
+config IRQ_TIMER9
+	int "TIMER 9  Interrupt"
+	default 10
+config IRQ_TIMER10
+	int "TIMER 10 Interrupt"
+	default 10
+config IRQ_TIMER11
+	int "TIMER 11 Interrupt"
+	default 10
+config IRQ_PROG0_INTA
+	int "Programmable Flags0 A (8)"
+	default 11
+config IRQ_PROG0_INTB
+	int "Programmable Flags0 B (8)"
+	default 11
+config IRQ_PROG1_INTA
+	int "Programmable Flags1 A (8)"
+	default 11
+config IRQ_PROG1_INTB
+	int "Programmable Flags1 B (8)"
+	default 11
+config IRQ_PROG2_INTA
+	int "Programmable Flags2 A (8)"
+	default 11
+config IRQ_PROG2_INTB
+	int "Programmable Flags2 B (8)"
+	default 11
+config IRQ_DMA1_WRRD0
+	int "MDMA1 0 write/read INT"
+	default 8
+config IRQ_DMA1_WRRD1
+	int "MDMA1 1 write/read INT"
+	default 8
+config IRQ_DMA2_WRRD0
+	int "MDMA2 0 write/read INT"
+	default 9
+config IRQ_DMA2_WRRD1
+	int "MDMA2 1 write/read INT"
+	default 9
+config IRQ_IMDMA_WRRD0
+	int "IMDMA 0 write/read INT"
+	default 12
+config IRQ_IMDMA_WRRD1
+	int "IMDMA 1 write/read INT"
+	default 12
+config IRQ_WDTIMER
+	int "Watch Dog Timer"
+	default 13
+
+	help
+	  Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
+	  This applies to all the above.  It is not recommended to assign the
+	  highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/Makefile
new file mode 100644
index 0000000..b340297
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/Makefile
@@ -0,0 +1,9 @@
+#
+# arch/blackfin/mach-bf561/Makefile
+#
+
+obj-y := ints-priority.o dma.o
+
+obj-$(CONFIG_BF561_COREB) += coreb.o
+obj-$(CONFIG_SMP)  += smp.o secondary.o atomic.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/atomic.S b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/atomic.S
new file mode 100644
index 0000000..1e2989c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/atomic.S
@@ -0,0 +1,945 @@
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *              Philippe Gerum <rpm@xenomai.org>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#include <asm/cache.h>
+#include <asm/asm-offsets.h>
+#include <asm/rwlock.h>
+#include <asm/cplb.h>
+
+.text
+
+.macro coreslot_loadaddr reg:req
+	\reg\().l = _corelock;
+	\reg\().h = _corelock;
+.endm
+
+.macro safe_testset addr:req, scratch:req
+#if ANOMALY_05000477
+	cli \scratch;
+	testset (\addr);
+	sti \scratch;
+#else
+	testset (\addr);
+#endif
+.endm
+
+/*
+ * r0 = address of atomic data to flush and invalidate (32bit).
+ *
+ * Clear interrupts and return the old mask.
+ * We assume that no atomic data can span cachelines.
+ *
+ * Clobbers: r2:0, p0
+ */
+ENTRY(_get_core_lock)
+	r1 = -L1_CACHE_BYTES;
+	r1 = r0 & r1;
+	cli r0;
+	coreslot_loadaddr p0;
+.Lretry_corelock:
+	safe_testset p0, r2;
+	if cc jump .Ldone_corelock;
+	SSYNC(r2);
+	jump .Lretry_corelock
+.Ldone_corelock:
+	p0 = r1;
+	/* flush core internal write buffer before invalidate dcache */
+	CSYNC(r2);
+	flushinv[p0];
+	SSYNC(r2);
+	rts;
+ENDPROC(_get_core_lock)
+
+/*
+ * r0 = address of atomic data in uncacheable memory region (32bit).
+ *
+ * Clear interrupts and return the old mask.
+ *
+ * Clobbers: r0, p0
+ */
+ENTRY(_get_core_lock_noflush)
+	cli r0;
+	coreslot_loadaddr p0;
+.Lretry_corelock_noflush:
+	safe_testset p0, r2;
+	if cc jump .Ldone_corelock_noflush;
+	SSYNC(r2);
+	jump .Lretry_corelock_noflush
+.Ldone_corelock_noflush:
+	/*
+	 * SMP kgdb runs into dead loop without NOP here, when one core
+	 * single steps over get_core_lock_noflush and the other executes
+	 * get_core_lock as a slave node.
+	 */
+	nop;
+	CSYNC(r2);
+	rts;
+ENDPROC(_get_core_lock_noflush)
+
+/*
+ * r0 = interrupt mask to restore.
+ * r1 = address of atomic data to flush and invalidate (32bit).
+ *
+ * Interrupts are masked on entry (see _get_core_lock).
+ * Clobbers: r2:0, p0
+ */
+ENTRY(_put_core_lock)
+	/* Write-through cache assumed, so no flush needed here. */
+	coreslot_loadaddr p0;
+	r1 = 0;
+	[p0] = r1;
+	SSYNC(r2);
+	sti r0;
+	rts;
+ENDPROC(_put_core_lock)
+
+#ifdef __ARCH_SYNC_CORE_DCACHE
+
+ENTRY(___raw_smp_mark_barrier_asm)
+	[--sp] = rets;
+	[--sp] = ( r7:5 );
+	[--sp] = r0;
+	[--sp] = p1;
+	[--sp] = p0;
+	call _get_core_lock_noflush;
+
+	/*
+	 * Calculate current core mask
+	 */
+	GET_CPUID(p1, r7);
+	r6 = 1;
+	r6 <<= r7;
+
+	/*
+	 * Set bit of other cores in barrier mask. Don't change current core bit.
+	 */
+	p1.l = _barrier_mask;
+	p1.h = _barrier_mask;
+	r7 = [p1];
+	r5 = r7 & r6;
+	r7 = ~r6;
+	cc = r5 == 0;
+	if cc jump 1f;
+	r7 = r7 | r6;
+1:
+	[p1] = r7;
+	SSYNC(r2);
+
+	call _put_core_lock;
+	p0 = [sp++];
+	p1 = [sp++];
+	r0 = [sp++];
+	( r7:5 ) = [sp++];
+	rets = [sp++];
+	rts;
+ENDPROC(___raw_smp_mark_barrier_asm)
+
+ENTRY(___raw_smp_check_barrier_asm)
+	[--sp] = rets;
+	[--sp] = ( r7:5 );
+	[--sp] = r0;
+	[--sp] = p1;
+	[--sp] = p0;
+	call _get_core_lock_noflush;
+
+	/*
+	 * Calculate current core mask
+	 */
+	GET_CPUID(p1, r7);
+	r6 = 1;
+	r6 <<= r7;
+
+	/*
+	 * Clear current core bit in barrier mask if it is set.
+	 */
+	p1.l = _barrier_mask;
+	p1.h = _barrier_mask;
+	r7 = [p1];
+	r5 = r7 & r6;
+	cc = r5 == 0;
+	if cc jump 1f;
+	r6 = ~r6;
+	r7 = r7 & r6;
+	[p1] = r7;
+	SSYNC(r2);
+
+	call _put_core_lock;
+
+	/*
+	 * Invalidate the entire D-cache of current core.
+	 */
+	sp += -12;
+	call _resync_core_dcache
+	sp += 12;
+	jump 2f;
+1:
+	call _put_core_lock;
+2:
+	p0 = [sp++];
+	p1 = [sp++];
+	r0 = [sp++];
+	( r7:5 ) = [sp++];
+	rets = [sp++];
+	rts;
+ENDPROC(___raw_smp_check_barrier_asm)
+
+/*
+ * r0 = irqflags
+ * r1 = address of atomic data
+ *
+ * Clobbers: r2:0, p1:0
+ */
+_start_lock_coherent:
+
+	[--sp] = rets;
+	[--sp] = ( r7:6 );
+	r7 = r0;
+	p1 = r1;
+
+	/*
+	 * Determine whether the atomic data was previously
+	 * owned by another CPU (=r6).
+	 */
+	GET_CPUID(p0, r2);
+	r1 = 1;
+	r1 <<= r2;
+	r2 = ~r1;
+
+	r1 = [p1];
+	r1 >>= 28;   /* CPU fingerprints are stored in the high nibble. */
+	r6 = r1 & r2;
+	r1 = [p1];
+	r1 <<= 4;
+	r1 >>= 4;
+	[p1] = r1;
+
+	/*
+	 * Release the core lock now, but keep IRQs disabled while we are
+	 * performing the remaining housekeeping chores for the current CPU.
+	 */
+	coreslot_loadaddr p0;
+	r1 = 0;
+	[p0] = r1;
+
+	/*
+	 * If another CPU has owned the same atomic section before us,
+	 * then our D-cached copy of the shared data protected by the
+	 * current spin/write_lock may be obsolete.
+	 */
+	cc = r6 == 0;
+	if cc jump .Lcache_synced
+
+	/*
+	 * Invalidate the entire D-cache of the current core.
+	 */
+	sp += -12;
+	call _resync_core_dcache
+	sp += 12;
+
+.Lcache_synced:
+	SSYNC(r2);
+	sti r7;
+	( r7:6 ) = [sp++];
+	rets = [sp++];
+	rts
+
+/*
+ * r0 = irqflags
+ * r1 = address of atomic data
+ *
+ * Clobbers: r2:0, p1:0
+ */
+_end_lock_coherent:
+
+	p1 = r1;
+	GET_CPUID(p0, r2);
+	r2 += 28;
+	r1 = 1;
+	r1 <<= r2;
+	r2 = [p1];
+	r2 = r1 | r2;
+	[p1] = r2;
+	r1 = p1;
+	jump _put_core_lock;
+
+#endif /* __ARCH_SYNC_CORE_DCACHE */
+
+/*
+ * r0 = &spinlock->lock
+ *
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_spin_is_locked_asm)
+	p1 = r0;
+	[--sp] = rets;
+	call _get_core_lock;
+	r3 = [p1];
+	cc = bittst( r3, 0 );
+	r3 = cc;
+	r1 = p1;
+	call _put_core_lock;
+	rets = [sp++];
+	r0 = r3;
+	rts;
+ENDPROC(___raw_spin_is_locked_asm)
+
+/*
+ * r0 = &spinlock->lock
+ *
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_spin_lock_asm)
+	p1 = r0;
+	[--sp] = rets;
+.Lretry_spinlock:
+	call _get_core_lock;
+	r1 = p1;
+	r2 = [p1];
+	cc = bittst( r2, 0 );
+	if cc jump .Lbusy_spinlock
+#ifdef __ARCH_SYNC_CORE_DCACHE
+	r3 = p1;
+	bitset ( r2, 0 ); /* Raise the lock bit. */
+	[p1] = r2;
+	call _start_lock_coherent
+#else
+	r2 = 1;
+	[p1] = r2;
+	call _put_core_lock;
+#endif
+	rets = [sp++];
+	rts;
+
+.Lbusy_spinlock:
+	/* We don't touch the atomic area if busy, so that flush
+	   will behave like nop in _put_core_lock. */
+	call _put_core_lock;
+	SSYNC(r2);
+	r0 = p1;
+	jump .Lretry_spinlock
+ENDPROC(___raw_spin_lock_asm)
+
+/*
+ * r0 = &spinlock->lock
+ *
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_spin_trylock_asm)
+	p1 = r0;
+	[--sp] = rets;
+	call _get_core_lock;
+	r1 = p1;
+	r3 = [p1];
+	cc = bittst( r3, 0 );
+	if cc jump .Lfailed_trylock
+#ifdef __ARCH_SYNC_CORE_DCACHE
+	bitset ( r3, 0 ); /* Raise the lock bit. */
+	[p1] = r3;
+	call _start_lock_coherent
+#else
+	r2 = 1;
+	[p1] = r2;
+	call _put_core_lock;
+#endif
+	r0 = 1;
+	rets = [sp++];
+	rts;
+.Lfailed_trylock:
+	call _put_core_lock;
+	r0 = 0;
+	rets = [sp++];
+	rts;
+ENDPROC(___raw_spin_trylock_asm)
+
+/*
+ * r0 = &spinlock->lock
+ *
+ * Clobbers: r2:0, p1:0
+ */
+ENTRY(___raw_spin_unlock_asm)
+	p1 = r0;
+	[--sp] = rets;
+	call _get_core_lock;
+	r2 = [p1];
+	bitclr ( r2, 0 );
+	[p1] = r2;
+	r1 = p1;
+#ifdef __ARCH_SYNC_CORE_DCACHE
+	call _end_lock_coherent
+#else
+	call _put_core_lock;
+#endif
+	rets = [sp++];
+	rts;
+ENDPROC(___raw_spin_unlock_asm)
+
+/*
+ * r0 = &rwlock->lock
+ *
+ * Clobbers: r2:0, p1:0
+ */
+ENTRY(___raw_read_lock_asm)
+	p1 = r0;
+	[--sp] = rets;
+	call _get_core_lock;
+.Lrdlock_try:
+	r1 = [p1];
+	r1 += -1;
+	[p1] = r1;
+	cc = r1 < 0;
+	if cc jump .Lrdlock_failed
+	r1 = p1;
+#ifdef __ARCH_SYNC_CORE_DCACHE
+	call _start_lock_coherent
+#else
+	call _put_core_lock;
+#endif
+	rets = [sp++];
+	rts;
+
+.Lrdlock_failed:
+	r1 += 1;
+	[p1] = r1;
+.Lrdlock_wait:
+	r1 = p1;
+	call _put_core_lock;
+	SSYNC(r2);
+	r0 = p1;
+	call _get_core_lock;
+	r1 = [p1];
+	cc = r1 < 2;
+	if cc jump .Lrdlock_wait;
+	jump .Lrdlock_try
+ENDPROC(___raw_read_lock_asm)
+
+/*
+ * r0 = &rwlock->lock
+ *
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_read_trylock_asm)
+	p1 = r0;
+	[--sp] = rets;
+	call _get_core_lock;
+	r1 = [p1];
+	cc = r1 <= 0;
+	if cc jump .Lfailed_tryrdlock;
+	r1 += -1;
+	[p1] = r1;
+	r1 = p1;
+#ifdef __ARCH_SYNC_CORE_DCACHE
+	call _start_lock_coherent
+#else
+	call _put_core_lock;
+#endif
+	rets = [sp++];
+	r0 = 1;
+	rts;
+.Lfailed_tryrdlock:
+	r1 = p1;
+	call _put_core_lock;
+	rets = [sp++];
+	r0 = 0;
+	rts;
+ENDPROC(___raw_read_trylock_asm)
+
+/*
+ * r0 = &rwlock->lock
+ *
+ * Note: Processing controlled by a reader lock should not have
+ * any side-effect on cache issues with the other core, so we
+ * just release the core lock and exit (no _end_lock_coherent).
+ *
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_read_unlock_asm)
+	p1 = r0;
+	[--sp] = rets;
+	call _get_core_lock;
+	r1 = [p1];
+	r1 += 1;
+	[p1] = r1;
+	r1 = p1;
+	call _put_core_lock;
+	rets = [sp++];
+	rts;
+ENDPROC(___raw_read_unlock_asm)
+
+/*
+ * r0 = &rwlock->lock
+ *
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_write_lock_asm)
+	p1 = r0;
+	r3.l = lo(RW_LOCK_BIAS);
+	r3.h = hi(RW_LOCK_BIAS);
+	[--sp] = rets;
+	call _get_core_lock;
+.Lwrlock_try:
+	r1 = [p1];
+	r1 = r1 - r3;
+#ifdef __ARCH_SYNC_CORE_DCACHE
+	r2 = r1;
+	r2 <<= 4;
+	r2 >>= 4;
+	cc = r2 == 0;
+#else
+	cc = r1 == 0;
+#endif
+	if !cc jump .Lwrlock_wait
+	[p1] = r1;
+	r1 = p1;
+#ifdef __ARCH_SYNC_CORE_DCACHE
+	call _start_lock_coherent
+#else
+	call _put_core_lock;
+#endif
+	rets = [sp++];
+	rts;
+
+.Lwrlock_wait:
+	r1 = p1;
+	call _put_core_lock;
+	SSYNC(r2);
+	r0 = p1;
+	call _get_core_lock;
+	r1 = [p1];
+#ifdef __ARCH_SYNC_CORE_DCACHE
+	r1 <<= 4;
+	r1 >>= 4;
+#endif
+	cc = r1 == r3;
+	if !cc jump .Lwrlock_wait;
+	jump .Lwrlock_try
+ENDPROC(___raw_write_lock_asm)
+
+/*
+ * r0 = &rwlock->lock
+ *
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_write_trylock_asm)
+	p1 = r0;
+	[--sp] = rets;
+	call _get_core_lock;
+	r1 = [p1];
+	r2.l = lo(RW_LOCK_BIAS);
+	r2.h = hi(RW_LOCK_BIAS);
+	cc = r1 == r2;
+	if !cc jump .Lfailed_trywrlock;
+#ifdef __ARCH_SYNC_CORE_DCACHE
+	r1 >>= 28;
+	r1 <<= 28;
+#else
+	r1 = 0;
+#endif
+	[p1] = r1;
+	r1 = p1;
+#ifdef __ARCH_SYNC_CORE_DCACHE
+	call _start_lock_coherent
+#else
+	call _put_core_lock;
+#endif
+	rets = [sp++];
+	r0 = 1;
+	rts;
+
+.Lfailed_trywrlock:
+	r1 = p1;
+	call _put_core_lock;
+	rets = [sp++];
+	r0 = 0;
+	rts;
+ENDPROC(___raw_write_trylock_asm)
+
+/*
+ * r0 = &rwlock->lock
+ *
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_write_unlock_asm)
+	p1 = r0;
+	r3.l = lo(RW_LOCK_BIAS);
+	r3.h = hi(RW_LOCK_BIAS);
+	[--sp] = rets;
+	call _get_core_lock;
+	r1 = [p1];
+	r1 = r1 + r3;
+	[p1] = r1;
+	r1 = p1;
+#ifdef __ARCH_SYNC_CORE_DCACHE
+	call _end_lock_coherent
+#else
+	call _put_core_lock;
+#endif
+	rets = [sp++];
+	rts;
+ENDPROC(___raw_write_unlock_asm)
+
+/*
+ * r0 = ptr
+ * r1 = value
+ *
+ * ADD a signed value to a 32bit word and return the new value atomically.
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_atomic_add_asm)
+	p1 = r0;
+	r3 = r1;
+	[--sp] = rets;
+	call _get_core_lock;
+	r2 = [p1];
+	r3 = r3 + r2;
+	[p1] = r3;
+	r1 = p1;
+	call _put_core_lock;
+	r0 = r3;
+	rets = [sp++];
+	rts;
+ENDPROC(___raw_atomic_add_asm)
+
+/*
+ * r0 = ptr
+ * r1 = value
+ *
+ * ADD a signed value to a 32bit word and return the old value atomically.
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_atomic_xadd_asm)
+	p1 = r0;
+	r3 = r1;
+	[--sp] = rets;
+	call _get_core_lock;
+	r3 = [p1];
+	r2 = r3 + r2;
+	[p1] = r2;
+	r1 = p1;
+	call _put_core_lock;
+	r0 = r3;
+	rets = [sp++];
+	rts;
+ENDPROC(___raw_atomic_add_asm)
+
+/*
+ * r0 = ptr
+ * r1 = mask
+ *
+ * AND the mask bits from a 32bit word and return the old 32bit value
+ * atomically.
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_atomic_and_asm)
+	p1 = r0;
+	r3 = r1;
+	[--sp] = rets;
+	call _get_core_lock;
+	r3 = [p1];
+	r2 = r2 & r3;
+	[p1] = r2;
+	r1 = p1;
+	call _put_core_lock;
+	r0 = r3;
+	rets = [sp++];
+	rts;
+ENDPROC(___raw_atomic_and_asm)
+
+/*
+ * r0 = ptr
+ * r1 = mask
+ *
+ * OR the mask bits into a 32bit word and return the old 32bit value
+ * atomically.
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_atomic_or_asm)
+	p1 = r0;
+	r3 = r1;
+	[--sp] = rets;
+	call _get_core_lock;
+	r3 = [p1];
+	r2 = r2 | r3;
+	[p1] = r2;
+	r1 = p1;
+	call _put_core_lock;
+	r0 = r3;
+	rets = [sp++];
+	rts;
+ENDPROC(___raw_atomic_or_asm)
+
+/*
+ * r0 = ptr
+ * r1 = mask
+ *
+ * XOR the mask bits with a 32bit word and return the old 32bit value
+ * atomically.
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_atomic_xor_asm)
+	p1 = r0;
+	r3 = r1;
+	[--sp] = rets;
+	call _get_core_lock;
+	r3 = [p1];
+	r2 = r2 ^ r3;
+	[p1] = r2;
+	r1 = p1;
+	call _put_core_lock;
+	r0 = r3;
+	rets = [sp++];
+	rts;
+ENDPROC(___raw_atomic_xor_asm)
+
+/*
+ * r0 = ptr
+ * r1 = mask
+ *
+ * Perform a logical AND between the mask bits and a 32bit word, and
+ * return the masked value. We need this on this architecture in
+ * order to invalidate the local cache before testing.
+ *
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_atomic_test_asm)
+	p1 = r0;
+	r3 = r1;
+	r1 = -L1_CACHE_BYTES;
+	r1 = r0 & r1;
+	p0 = r1;
+	/* flush core internal write buffer before invalidate dcache */
+	CSYNC(r2);
+	flushinv[p0];
+	SSYNC(r2);
+	r0 = [p1];
+	r0 = r0 & r3;
+	rts;
+ENDPROC(___raw_atomic_test_asm)
+
+/*
+ * r0 = ptr
+ * r1 = value
+ *
+ * Swap *ptr with value and return the old 32bit value atomically.
+ * Clobbers: r3:0, p1:0
+ */
+#define	__do_xchg(src, dst) 		\
+	p1 = r0;			\
+	r3 = r1;			\
+	[--sp] = rets;			\
+	call _get_core_lock;		\
+	r2 = src;			\
+	dst = r3;			\
+	r3 = r2;			\
+	r1 = p1;			\
+	call _put_core_lock;		\
+	r0 = r3;			\
+	rets = [sp++];			\
+	rts;
+
+ENTRY(___raw_xchg_1_asm)
+	__do_xchg(b[p1] (z), b[p1])
+ENDPROC(___raw_xchg_1_asm)
+
+ENTRY(___raw_xchg_2_asm)
+	__do_xchg(w[p1] (z), w[p1])
+ENDPROC(___raw_xchg_2_asm)
+
+ENTRY(___raw_xchg_4_asm)
+	__do_xchg([p1], [p1])
+ENDPROC(___raw_xchg_4_asm)
+
+/*
+ * r0 = ptr
+ * r1 = new
+ * r2 = old
+ *
+ * Swap *ptr with new if *ptr == old and return the previous *ptr
+ * value atomically.
+ *
+ * Clobbers: r3:0, p1:0
+ */
+#define	__do_cmpxchg(src, dst) 		\
+	[--sp] = rets;			\
+	[--sp] = r4;			\
+	p1 = r0;			\
+	r3 = r1;			\
+	r4 = r2;			\
+	call _get_core_lock;		\
+	r2 = src;			\
+	cc = r2 == r4;			\
+	if !cc jump 1f;			\
+	dst = r3;			\
+     1: r3 = r2;			\
+	r1 = p1;			\
+	call _put_core_lock;		\
+	r0 = r3;			\
+	r4 = [sp++];			\
+	rets = [sp++];			\
+	rts;
+
+ENTRY(___raw_cmpxchg_1_asm)
+	__do_cmpxchg(b[p1] (z), b[p1])
+ENDPROC(___raw_cmpxchg_1_asm)
+
+ENTRY(___raw_cmpxchg_2_asm)
+	__do_cmpxchg(w[p1] (z), w[p1])
+ENDPROC(___raw_cmpxchg_2_asm)
+
+ENTRY(___raw_cmpxchg_4_asm)
+	__do_cmpxchg([p1], [p1])
+ENDPROC(___raw_cmpxchg_4_asm)
+
+/*
+ * r0 = ptr
+ * r1 = bitnr
+ *
+ * Set a bit in a 32bit word and return the old 32bit value atomically.
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_bit_set_asm)
+	r2 = r1;
+	r1 = 1;
+	r1 <<= r2;
+	jump ___raw_atomic_or_asm
+ENDPROC(___raw_bit_set_asm)
+
+/*
+ * r0 = ptr
+ * r1 = bitnr
+ *
+ * Clear a bit in a 32bit word and return the old 32bit value atomically.
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_bit_clear_asm)
+	r2 = 1;
+	r2 <<= r1;
+	r1 = ~r2;
+	jump ___raw_atomic_and_asm
+ENDPROC(___raw_bit_clear_asm)
+
+/*
+ * r0 = ptr
+ * r1 = bitnr
+ *
+ * Toggle a bit in a 32bit word and return the old 32bit value atomically.
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_bit_toggle_asm)
+	r2 = r1;
+	r1 = 1;
+	r1 <<= r2;
+	jump ___raw_atomic_xor_asm
+ENDPROC(___raw_bit_toggle_asm)
+
+/*
+ * r0 = ptr
+ * r1 = bitnr
+ *
+ * Test-and-set a bit in a 32bit word and return the old bit value atomically.
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_bit_test_set_asm)
+	[--sp] = rets;
+	[--sp] = r1;
+	call ___raw_bit_set_asm
+	r1 = [sp++];
+	r2 = 1;
+	r2 <<= r1;
+	r0 = r0 & r2;
+	cc = r0 == 0;
+	if cc jump 1f
+	r0 = 1;
+1:
+	rets = [sp++];
+	rts;
+ENDPROC(___raw_bit_test_set_asm)
+
+/*
+ * r0 = ptr
+ * r1 = bitnr
+ *
+ * Test-and-clear a bit in a 32bit word and return the old bit value atomically.
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_bit_test_clear_asm)
+	[--sp] = rets;
+	[--sp] = r1;
+	call ___raw_bit_clear_asm
+	r1 = [sp++];
+	r2 = 1;
+	r2 <<= r1;
+	r0 = r0 & r2;
+	cc = r0 == 0;
+	if cc jump 1f
+	r0 = 1;
+1:
+	rets = [sp++];
+	rts;
+ENDPROC(___raw_bit_test_clear_asm)
+
+/*
+ * r0 = ptr
+ * r1 = bitnr
+ *
+ * Test-and-toggle a bit in a 32bit word,
+ * and return the old bit value atomically.
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_bit_test_toggle_asm)
+	[--sp] = rets;
+	[--sp] = r1;
+	call ___raw_bit_toggle_asm
+	r1 = [sp++];
+	r2 = 1;
+	r2 <<= r1;
+	r0 = r0 & r2;
+	cc = r0 == 0;
+	if cc jump 1f
+	r0 = 1;
+1:
+	rets = [sp++];
+	rts;
+ENDPROC(___raw_bit_test_toggle_asm)
+
+/*
+ * r0 = ptr
+ * r1 = bitnr
+ *
+ * Test a bit in a 32bit word and return its value.
+ * We need this on this architecture in order to invalidate
+ * the local cache before testing.
+ *
+ * Clobbers: r3:0, p1:0
+ */
+ENTRY(___raw_bit_test_asm)
+	r2 = r1;
+	r1 = 1;
+	r1 <<= r2;
+	jump ___raw_atomic_test_asm
+ENDPROC(___raw_bit_test_asm)
+
+/*
+ * r0 = ptr
+ *
+ * Fetch and return an uncached 32bit value.
+ *
+ * Clobbers: r2:0, p1:0
+ */
+ENTRY(___raw_uncached_fetch_asm)
+	p1 = r0;
+	r1 = -L1_CACHE_BYTES;
+	r1 = r0 & r1;
+	p0 = r1;
+	/* flush core internal write buffer before invalidate dcache */
+	CSYNC(r2);
+	flushinv[p0];
+	SSYNC(r2);
+	r0 = [p1];
+	rts;
+ENDPROC(___raw_uncached_fetch_asm)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/Kconfig
new file mode 100644
index 0000000..10e977b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/Kconfig
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+choice
+	prompt "System type"
+	default BFIN561_EZKIT
+	help
+	  Select your board!
+
+config BFIN561_EZKIT
+	bool "BF561-EZKIT"
+	help
+	  BF561-EZKIT-LITE board support.
+
+config BFIN561_TEPLA
+	bool "BF561-TEPLA"
+	help
+	 BF561-TEPLA board support.
+
+config BFIN561_BLUETECHNIX_CM
+	bool "Bluetechnix CM-BF561"
+	help
+	  CM-BF561 support for EVAL- and DEV-Board.
+
+config BFIN561_ACVILON
+	bool "BF561-ACVILON"
+	help
+	  BF561-ACVILON System On Module support (SO-DIMM 144).
+	  For more information about Acvilon BF561 SoM
+	  please go to http://www.niistt.ru/
+
+endchoice
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/Makefile
new file mode 100644
index 0000000..a5879f7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/Makefile
@@ -0,0 +1,8 @@
+#
+# arch/blackfin/mach-bf561/boards/Makefile
+#
+
+obj-$(CONFIG_BFIN561_ACVILON)          += acvilon.o
+obj-$(CONFIG_BFIN561_BLUETECHNIX_CM)   += cm_bf561.o
+obj-$(CONFIG_BFIN561_EZKIT)            += ezkit.o
+obj-$(CONFIG_BFIN561_TEPLA)            += tepla.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/acvilon.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/acvilon.c
new file mode 100644
index 0000000..696cc9d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -0,0 +1,543 @@
+/*
+ * File:         arch/blackfin/mach-bf561/acvilon.c
+ * Based on:     arch/blackfin/mach-bf561/ezkit.c
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *               Copyright 2009 CJSC "NII STT"
+ *
+ * Bugs:
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ *
+ * For more information about Acvilon BF561 SoM please
+ * go to http://www.niistt.ru/
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/jiffies.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <asm/cacheflush.h>
+#include <linux/i2c.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Acvilon board";
+
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
+#include <linux/usb/isp1760.h>
+static struct resource bfin_isp1760_resources[] = {
+	[0] = {
+	       .start = 0x20000000,
+	       .end = 0x20000000 + 0x000fffff,
+	       .flags = IORESOURCE_MEM,
+	       },
+	[1] = {
+	       .start = IRQ_PF15,
+	       .end = IRQ_PF15,
+	       .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	       },
+};
+
+static struct isp1760_platform_data isp1760_priv = {
+	.is_isp1761 = 0,
+	.port1_disable = 0,
+	.bus_width_16 = 1,
+	.port1_otg = 0,
+	.analog_oc = 0,
+	.dack_polarity_high = 0,
+	.dreq_polarity_high = 0,
+};
+
+static struct platform_device bfin_isp1760_device = {
+	.name = "isp1760-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1760_priv,
+		},
+	.num_resources = ARRAY_SIZE(bfin_isp1760_resources),
+	.resource = bfin_isp1760_resources,
+};
+#endif
+
+static struct resource bfin_i2c_pca_resources[] = {
+	{
+	 .name = "pca9564-regs",
+	 .start = 0x2C000000,
+	 .end = 0x2C000000 + 16,
+	 .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+	 }, {
+
+	     .start = IRQ_PF8,
+	     .end = IRQ_PF8,
+	     .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	     },
+};
+
+struct i2c_pca9564_pf_platform_data pca9564_platform_data = {
+	.gpio = -1,
+	.i2c_clock_speed = 330000,
+	.timeout = HZ,
+};
+
+/* PCA9564 I2C Bus driver */
+static struct platform_device bfin_i2c_pca_device = {
+	.name = "i2c-pca-platform",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_i2c_pca_resources),
+	.resource = bfin_i2c_pca_resources,
+	.dev = {
+		.platform_data = &pca9564_platform_data,
+		}
+};
+
+/* I2C devices fitted. */
+static struct i2c_board_info acvilon_i2c_devs[] __initdata = {
+	{
+	 I2C_BOARD_INFO("ds1339", 0x68),
+	 },
+	{
+	 I2C_BOARD_INFO("tcn75", 0x49),
+	 },
+};
+
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
+static struct platdata_mtd_ram mtd_ram_data = {
+	.mapname = "rootfs(RAM)",
+	.bankwidth = 4,
+};
+
+static struct resource mtd_ram_resource = {
+	.start = 0x4000000,
+	.end = 0x5ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mtd_ram_device = {
+	.name = "mtd-ram",
+	.id = 0,
+	.dev = {
+		.platform_data = &mtd_ram_data,
+		},
+	.num_resources = 1,
+	.resource = &mtd_ram_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SMSC911X)
+#include <linux/smsc911x.h>
+static struct resource smsc911x_resources[] = {
+	{
+	 .name = "smsc911x-memory",
+	 .start = 0x28000000,
+	 .end = 0x28000000 + 0xFF,
+	 .flags = IORESOURCE_MEM,
+	 },
+	{
+	 .start = IRQ_PF7,
+	 .end = IRQ_PF7,
+	 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	 },
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name = "smsc911x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smsc911x_resources),
+	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+		},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+	 .start = BFIN_UART_THR,
+	 .end = BFIN_UART_GCTL + 2,
+	 .flags = IORESOURCE_MEM,
+	 },
+	{
+	 .start = IRQ_UART_TX,
+	 .end = IRQ_UART_TX,
+	 .flags = IORESOURCE_IRQ,
+	 },
+	{
+	 .start = IRQ_UART_RX,
+	 .end = IRQ_UART_RX,
+	 .flags = IORESOURCE_IRQ,
+	 },
+	{
+	 .start = IRQ_UART_ERROR,
+	 .end = IRQ_UART_ERROR,
+	 .flags = IORESOURCE_IRQ,
+	 },
+	{
+	 .start = CH_UART_TX,
+	 .end = CH_UART_TX,
+	 .flags = IORESOURCE_DMA,
+	 },
+	{
+	 .start = CH_UART_RX,
+	 .end = CH_UART_RX,
+	 .flags = IORESOURCE_DMA,
+	 },
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		/* Passed to driver */
+		.platform_data = &bfin_uart0_peripherals,
+		},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
+
+static struct mtd_partition bfin_plat_nand_partitions[] = {
+	{
+	 .name = "params(nand)",
+	 .size = 32 * 1024 * 1024,
+	 .offset = 0,
+	 }, {
+	     .name = "userfs(nand)",
+	     .size = MTDPART_SIZ_FULL,
+	     .offset = MTDPART_OFS_APPEND,
+	     },
+};
+
+#define BFIN_NAND_PLAT_CLE 2
+#define BFIN_NAND_PLAT_ALE 3
+
+static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+				    unsigned int ctrl)
+{
+	struct nand_chip *this = mtd_to_nand(mtd);
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
+	else
+		writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
+}
+
+#define BFIN_NAND_PLAT_READY GPIO_PF10
+static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(BFIN_NAND_PLAT_READY);
+}
+
+static struct platform_nand_data bfin_plat_nand_data = {
+	.chip = {
+		 .nr_chips = 1,
+		 .chip_delay = 30,
+		 .partitions = bfin_plat_nand_partitions,
+		 .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
+		 },
+	.ctrl = {
+		 .cmd_ctrl = bfin_plat_nand_cmd_ctrl,
+		 .dev_ready = bfin_plat_nand_dev_ready,
+		 },
+};
+
+#define MAX(x, y) (x > y ? x : y)
+static struct resource bfin_plat_nand_resources = {
+	.start = 0x24000000,
+	.end = 0x24000000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device bfin_async_nand_device = {
+	.name = "gen_nand",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_plat_nand_resources,
+	.dev = {
+		.platform_data = &bfin_plat_nand_data,
+		},
+};
+
+static void bfin_plat_nand_init(void)
+{
+	gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
+}
+#else
+static void bfin_plat_nand_init(void)
+{
+}
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
+static struct mtd_partition bfin_spi_dataflash_partitions[] = {
+	{
+	 .name = "bootloader",
+	 .size = 0x4200,
+	 .offset = 0,
+	 .mask_flags = MTD_CAP_ROM},
+	{
+	 .name = "u-boot",
+	 .size = 0x42000,
+	 .offset = MTDPART_OFS_APPEND,
+	 },
+	{
+	 .name = "u-boot(params)",
+	 .size = 0x4200,
+	 .offset = MTDPART_OFS_APPEND,
+	 },
+	{
+	 .name = "kernel",
+	 .size = 0x294000,
+	 .offset = MTDPART_OFS_APPEND,
+	 },
+	{
+	 .name = "params",
+	 .size = 0x42000,
+	 .offset = MTDPART_OFS_APPEND,
+	 },
+	{
+	 .name = "rootfs",
+	 .size = MTDPART_SIZ_FULL,
+	 .offset = MTDPART_OFS_APPEND,
+	 }
+};
+
+static struct flash_platform_data bfin_spi_dataflash_data = {
+	.name = "SPI Dataflash",
+	.parts = bfin_spi_dataflash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
+};
+
+/* DataFlash chip */
+static struct bfin5xx_spi_chip data_flash_chip_info = {
+	.enable_dma = 0,	/* use dma transfer with this chip */
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+	       .start = SPI0_REGBASE,
+	       .end = SPI0_REGBASE + 0xFF,
+	       .flags = IORESOURCE_MEM,
+	       },
+	[1] = {
+	       .start = CH_SPI,
+	       .end = CH_SPI,
+	       .flags = IORESOURCE_DMA,
+	       },
+	[2] = {
+	       .start = IRQ_SPI,
+	       .end = IRQ_SPI,
+	       .flags = IORESOURCE_IRQ,
+	       },
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,	/* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0,		/* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info,	/* Passed to driver */
+		},
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+	 .modalias = "spidev",
+	 .max_speed_hz = 3125000,	/* max spi clock (SCK) speed in HZ */
+	 .bus_num = 0,
+	 .chip_select = 3,
+	 },
+#endif
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
+	{			/* DataFlash chip */
+	 .modalias = "mtd_dataflash",
+	 .max_speed_hz = 33250000,	/* max spi clock (SCK) speed in HZ */
+	 .bus_num = 0,		/* Framework bus number */
+	 .chip_select = 2,	/* Framework chip select */
+	 .platform_data = &bfin_spi_dataflash_data,
+	 .controller_data = &data_flash_chip_info,
+	 .mode = SPI_MODE_3,
+	 },
+#endif
+};
+
+static struct resource bfin_gpios_resources = {
+	.start = 31,
+/*      .end   = MAX_BLACKFIN_GPIOS - 1, */
+	.end = 32,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
+static const unsigned int cclk_vlev_datasheet[] = {
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 300000000),
+	VRPAIR(VLEV_095, 313000000),
+	VRPAIR(VLEV_100, 350000000),
+	VRPAIR(VLEV_105, 400000000),
+	VRPAIR(VLEV_110, 444000000),
+	VRPAIR(VLEV_115, 450000000),
+	VRPAIR(VLEV_120, 475000000),
+	VRPAIR(VLEV_125, 500000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */ ,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+		},
+};
+
+static struct platform_device *acvilon_devices[] __initdata = {
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+	&bfin_gpios_device,
+
+#if IS_ENABLED(CONFIG_SMSC911X)
+	&smsc911x_device,
+#endif
+
+	&bfin_i2c_pca_device,
+
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
+	&bfin_async_nand_device,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
+	&mtd_ram_device,
+#endif
+
+};
+
+static int __init acvilon_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+	bfin_plat_nand_init();
+	ret =
+	    platform_add_devices(acvilon_devices, ARRAY_SIZE(acvilon_devices));
+	if (ret < 0)
+		return ret;
+
+	i2c_register_board_info(0, acvilon_i2c_devs,
+				ARRAY_SIZE(acvilon_i2c_devs));
+
+	bfin_write_FIO0_FLAG_C(1 << 14);
+	msleep(5);
+	bfin_write_FIO0_FLAG_S(1 << 14);
+
+	spi_register_board_info(bfin_spi_board_info,
+				ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(acvilon_init);
+
+static struct platform_device *acvilon_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(acvilon_early_devices,
+				   ARRAY_SIZE(acvilon_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/cm_bf561.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/cm_bf561.c
new file mode 100644
index 0000000..10c5777
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -0,0 +1,556 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *               2008-2009 Bluetechnix
+ *               2005 National ICT Australia (NICTA)
+ *                    Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/mtd/physmap.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM BF561";
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* all SPI peripherals info goes here */
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00020000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = 0x20000
+	}, {
+		.name = "file system(spi)",
+		.size = 0x700000,
+		.offset = 0x00100000,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+	},
+#endif
+#if IS_ENABLED(CONFIG_MMC_SPI)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
+static struct platform_device hitachi_fb_device = {
+	.name = "hitachi-tx09",
+};
+#endif
+
+
+#if IS_ENABLED(CONFIG_SMC91X)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		 SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x28000300,
+		.end = 0x28000300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF0,
+		.end = IRQ_PF0,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SMSC911X)
+#include <linux/smsc911x.h>
+
+static struct resource smsc911x_resources[] = {
+	{
+		.name = "smsc911x-memory",
+		.start = 0x24008000,
+		.end = 0x24008000 + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PF43,
+		.end = IRQ_PF43,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_16BIT,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name = "smsc911x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smsc911x_resources),
+	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x24000000,
+		.end = 0x24000000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF45,
+		.end = IRQ_PF45,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x24008000,
+		.end = 0x24008000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x24008004,
+		.end = 0x24008004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF47,
+		.end = IRQ_PF47,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART_TX,
+		.end = IRQ_UART_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART_RX,
+		.end = IRQ_UART_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART_ERROR,
+		.end = IRQ_UART_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART_TX,
+		.end = CH_UART_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART_RX,
+		.end = CH_UART_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
+#define PATA_INT	IRQ_PF46
+
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 2,
+};
+
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x2400C000,
+		.end = 0x2400C001F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2400D018,
+		.end = 0x2400D01B,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = PATA_INT,
+		.end = PATA_INT,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device bfin_pata_device = {
+	.name = "pata_platform",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pata_resources),
+	.resource = bfin_pata_resources,
+	.dev = {
+		.platform_data = &bfin_pata_platform_data,
+	}
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+static struct mtd_partition para_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x100000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data para_flash_data = {
+	.width      = 2,
+	.parts      = para_partitions,
+	.nr_parts   = ARRAY_SIZE(para_partitions),
+};
+
+static struct resource para_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x207fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device para_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &para_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &para_flash_resource,
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 300000000),
+	VRPAIR(VLEV_095, 313000000),
+	VRPAIR(VLEV_100, 350000000),
+	VRPAIR(VLEV_105, 400000000),
+	VRPAIR(VLEV_110, 444000000),
+	VRPAIR(VLEV_115, 450000000),
+	VRPAIR(VLEV_120, 475000000),
+	VRPAIR(VLEV_125, 500000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *cm_bf561_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
+	&hitachi_fb_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+	&isp1362_hcd_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	&smc91x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMSC911X)
+	&smsc911x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	&net2272_bfin_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
+	&bfin_pata_device,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+	&para_flash_device,
+#endif
+};
+
+static int __init net2272_init(void)
+{
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	int ret;
+
+	ret = gpio_request(GPIO_PF46, "net2272");
+	if (ret)
+		return ret;
+
+	/* Reset USB Chip, PF46 */
+	gpio_direction_output(GPIO_PF46, 0);
+	mdelay(2);
+	gpio_set_value(GPIO_PF46, 1);
+#endif
+
+	return 0;
+}
+
+static int __init cm_bf561_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices));
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
+	irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
+#endif
+
+	if (net2272_init())
+		pr_warning("unable to configure net2272; it probably won't work\n");
+
+	return 0;
+}
+
+arch_initcall(cm_bf561_init);
+
+static struct platform_device *cm_bf561_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf561_early_devices,
+		ARRAY_SIZE(cm_bf561_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/ezkit.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/ezkit.c
new file mode 100644
index 0000000..57d1c43
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -0,0 +1,678 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *               2005 National ICT Australia (NICTA)
+ *                    Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "ADI BF561-EZKIT";
+
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
+#include <linux/usb/isp1760.h>
+static struct resource bfin_isp1760_resources[] = {
+	[0] = {
+		.start  = 0x2C0F0000,
+		.end    = 0x203C0000 + 0xfffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_PF10,
+		.end    = IRQ_PF10,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct isp1760_platform_data isp1760_priv = {
+	.is_isp1761 = 0,
+	.bus_width_16 = 1,
+	.port1_otg = 0,
+	.analog_oc = 0,
+	.dack_polarity_high = 0,
+	.dreq_polarity_high = 0,
+};
+
+static struct platform_device bfin_isp1760_device = {
+	.name           = "isp1760",
+	.id             = 0,
+	.dev = {
+		.platform_data = &isp1760_priv,
+	},
+	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
+	.resource       = bfin_isp1760_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+#include <linux/usb/isp1362.h>
+
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x2c060000,
+		.end = 0x2c060000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x2c060004,
+		.end = 0x2c060004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF8,
+		.end = IRQ_PF8,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x2C000000,
+		.end = 0x2C000000 + 0x7F,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 1,
+		.flags = IORESOURCE_BUS,
+	}, {
+		.start = IRQ_PF10,
+		.end = IRQ_PF10,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+/*
+ *  USB-LAN EzExtender board
+ *  Driver needs to know address, irq and flag pin.
+ */
+#if IS_ENABLED(CONFIG_SMC91X)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		 SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x2C010300,
+		.end = 0x2C010300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+
+		.start = IRQ_PF9,
+		.end = IRQ_PF9,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART_TX,
+		.end = IRQ_UART_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART_RX,
+		.end = IRQ_UART_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART_ERROR,
+		.end = IRQ_UART_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART_TX,
+		.end = CH_UART_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART_RX,
+		.end = CH_UART_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+static struct mtd_partition ezkit_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x1C0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = 0x800000 - 0x40000 - 0x1C0000 - 0x2000 * 8,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "config(nor)",
+		.size       = 0x2000 * 7,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "u-boot env(nor)",
+		.size       = 0x2000,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+	.width      = 2,
+	.parts      = ezkit_partitions,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x207fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezkit_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+		.platform_data = "ad1836", /* only includes chip name for the moment */
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+	},
+#endif
+};
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PF6, 1, "gpio-keys: BTN1"},
+	{BTN_2, GPIO_PF7, 1, "gpio-keys: BTN2"},
+	{BTN_3, GPIO_PF8, 1, "gpio-keys: BTN3"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_GPIO)
+#include <linux/i2c-gpio.h>
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+	.sda_pin		= GPIO_PF1,
+	.scl_pin		= GPIO_PF0,
+	.sda_is_open_drain	= 0,
+	.scl_is_open_drain	= 0,
+	.udelay			= 10,
+};
+
+static struct platform_device i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &i2c_gpio_data,
+	},
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 300000000),
+	VRPAIR(VLEV_095, 313000000),
+	VRPAIR(VLEV_100, 350000000),
+	VRPAIR(VLEV_105, 400000000),
+	VRPAIR(VLEV_110, 444000000),
+	VRPAIR(VLEV_115, 450000000),
+	VRPAIR(VLEV_120, 475000000),
+	VRPAIR(VLEV_125, 500000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_capture.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req[] = {
+	P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+	P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+	P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+	0,
+};
+
+static const struct ppi_info ppi_info = {
+	.type = PPI_TYPE_PPI,
+	.dma_ch = CH_PPI0,
+	.irq_err = IRQ_PPI1_ERROR,
+	.base = (void __iomem *)PPI0_CONTROL,
+	.pin_req = ppi_req,
+};
+
+#if IS_ENABLED(CONFIG_VIDEO_ADV7183)
+#include <media/i2c/adv7183.h>
+static struct v4l2_input adv7183_inputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = V4L2_STD_ALL,
+		.capabilities = V4L2_IN_CAP_STD,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = V4L2_STD_ALL,
+		.capabilities = V4L2_IN_CAP_STD,
+	},
+	{
+		.index = 2,
+		.name = "Component",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = V4L2_STD_ALL,
+		.capabilities = V4L2_IN_CAP_STD,
+	},
+};
+
+static struct bcap_route adv7183_routes[] = {
+	{
+		.input = ADV7183_COMPOSITE4,
+		.output = ADV7183_8BIT_OUT,
+	},
+	{
+		.input = ADV7183_SVIDEO0,
+		.output = ADV7183_8BIT_OUT,
+	},
+	{
+		.input = ADV7183_COMPONENT0,
+		.output = ADV7183_8BIT_OUT,
+	},
+};
+
+
+static const unsigned adv7183_gpio[] = {
+	GPIO_PF13, /* reset pin */
+	GPIO_PF2,  /* output enable pin */
+};
+
+static struct bfin_capture_config bfin_capture_data = {
+	.card_name = "BF561",
+	.inputs = adv7183_inputs,
+	.num_inputs = ARRAY_SIZE(adv7183_inputs),
+	.routes = adv7183_routes,
+	.i2c_adapter_id = 0,
+	.board_info = {
+		.type = "adv7183",
+		.addr = 0x20,
+		.platform_data = (void *)adv7183_gpio,
+	},
+	.ppi_info = &ppi_info,
+	.ppi_control = (PACK_EN | DLEN_8 | DMA32 | FLD_SEL),
+};
+#endif
+
+static struct platform_device bfin_capture_device = {
+	.name = "bfin_capture",
+	.dev = {
+		.platform_data = &bfin_capture_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+static struct platform_device bfin_ac97 = {
+	.name = "bfin-ac97",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+static const char * const ad1836_link[] = {
+	"bfin-i2s.0",
+	"spi0.4",
+};
+static struct platform_device bfin_ad1836_machine = {
+	.name = "bfin-snd-ad1836",
+	.id = -1,
+	.dev = {
+		.platform_data = (void *)ad1836_link,
+	},
+};
+#endif
+
+static struct platform_device *ezkit_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	&smc91x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	&net2272_bfin_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
+	&bfin_isp1760_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+	&bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+	&bfin_device_gpiokeys,
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_GPIO)
+	&i2c_gpio_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+	&isp1362_hcd_device,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+	&ezkit_flash_device,
+#endif
+
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
+	&bfin_capture_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+	&bfin_i2s,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+	&bfin_ac97,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+	&bfin_ad1836_machine,
+#endif
+};
+
+static int __init net2272_init(void)
+{
+#if IS_ENABLED(CONFIG_USB_NET2272)
+	int ret;
+
+	ret = gpio_request(GPIO_PF11, "net2272");
+	if (ret)
+		return ret;
+
+	/* Reset the USB chip */
+	gpio_direction_output(GPIO_PF11, 0);
+	mdelay(2);
+	gpio_set_value(GPIO_PF11, 1);
+#endif
+
+	return 0;
+}
+
+static int __init ezkit_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+	ret = platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
+	if (ret < 0)
+		return ret;
+
+#if IS_ENABLED(CONFIG_SMC91X)
+	bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12));
+	SSYNC();
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
+	bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 15));
+	bfin_write_FIO0_FLAG_S(1 << 15);
+	SSYNC();
+	/*
+	 * This initialization lasts for approximately 4500 MCLKs.
+	 * MCLK = 12.288MHz
+	 */
+	udelay(400);
+#endif
+
+	if (net2272_init())
+		pr_warning("unable to configure net2272; it probably won't work\n");
+
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(ezkit_init);
+
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/tepla.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/tepla.c
new file mode 100644
index 0000000..f87b8cc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/boards/tepla.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright 2004-2007 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Thanks to Jamey Hicks.
+ *
+ * Only SMSC91C1111 was registered, may do more later.
+ *
+ * Licensed under the GPL-2
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+
+const char bfin_board_name[] = "Tepla-BF561";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+static struct resource smc91x_resources[] = {
+	{
+		.start	= 0x2C000300,
+		.end	= 0x2C000320,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PROG_INTB,
+		.end	= IRQ_PROG_INTB,
+		.flags	= IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL,
+	}, {
+		.start	= IRQ_PF7,
+		.end	= IRQ_PF7,
+		.flags	= IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name          = "smc91x",
+	.id            = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource      = smc91x_resources,
+};
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART_TX,
+		.end = IRQ_UART_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART_RX,
+		.end = IRQ_UART_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART_ERROR,
+		.end = IRQ_UART_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART_TX,
+		.end = CH_UART_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART_RX,
+		.end = CH_UART_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
+static struct platform_device *tepla_devices[] __initdata = {
+	&smc91x_device,
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#endif
+};
+
+static int __init tepla_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	return platform_add_devices(tepla_devices, ARRAY_SIZE(tepla_devices));
+}
+
+arch_initcall(tepla_init);
+
+static struct platform_device *tepla_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(tepla_early_devices,
+		ARRAY_SIZE(tepla_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/coreb.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/coreb.c
new file mode 100644
index 0000000..cf27554
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/coreb.c
@@ -0,0 +1,64 @@
+/* Load firmware into Core B on a BF561
+ *
+ * Author: Bas Vermeulen <bvermeul@blackstar.xs4all.nl>
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+/* The Core B reset func requires code in the application that is loaded into
+ * Core B.  In order to reset, the application needs to install an interrupt
+ * handler for Supplemental Interrupt 0, that sets RETI to 0xff600000 and
+ * writes bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0.  This causes Core
+ * B to stall when Supplemental Interrupt 0 is set, and will reset PC to
+ * 0xff600000 when COREB_SRAM_INIT is cleared.
+ */
+
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+
+#define CMD_COREB_START		_IO('b', 0)
+#define CMD_COREB_STOP		_IO('b', 1)
+#define CMD_COREB_RESET		_IO('b', 2)
+
+static long
+coreb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	int ret = 0;
+
+	switch (cmd) {
+	case CMD_COREB_START:
+		bfin_write_SYSCR(bfin_read_SYSCR() & ~0x0020);
+		break;
+	case CMD_COREB_STOP:
+		bfin_write_SYSCR(bfin_read_SYSCR() | 0x0020);
+		bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
+		break;
+	case CMD_COREB_RESET:
+		bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	CSYNC();
+
+	return ret;
+}
+
+static const struct file_operations coreb_fops = {
+	.owner          = THIS_MODULE,
+	.unlocked_ioctl = coreb_ioctl,
+	.llseek		= noop_llseek,
+};
+
+static struct miscdevice coreb_dev = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name  = "coreb",
+	.fops  = &coreb_fops,
+};
+builtin_misc_device(coreb_dev);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/dma.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/dma.c
new file mode 100644
index 0000000..8ffdd6b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/dma.c
@@ -0,0 +1,114 @@
+/*
+ * the simple DMA Implementation for Blackfin
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS] = {
+	(struct dma_register *) DMA1_0_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_1_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_2_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_3_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_4_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_5_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_6_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_7_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_8_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_9_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_10_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_11_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_0_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_1_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_2_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_3_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_4_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_5_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_6_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_7_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_8_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_9_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_10_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_11_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D2_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S2_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D3_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S3_NEXT_DESC_PTR,
+	(struct dma_register *) IMDMA_D0_NEXT_DESC_PTR,
+	(struct dma_register *) IMDMA_S0_NEXT_DESC_PTR,
+	(struct dma_register *) IMDMA_D1_NEXT_DESC_PTR,
+	(struct dma_register *) IMDMA_S1_NEXT_DESC_PTR,
+};
+EXPORT_SYMBOL(dma_io_base_addr);
+
+int channel2irq(unsigned int channel)
+{
+	int ret_irq = -1;
+
+	switch (channel) {
+	case CH_PPI0:
+		ret_irq = IRQ_PPI0;
+		break;
+	case CH_PPI1:
+		ret_irq = IRQ_PPI1;
+		break;
+	case CH_SPORT0_RX:
+		ret_irq = IRQ_SPORT0_RX;
+		break;
+	case CH_SPORT0_TX:
+		ret_irq = IRQ_SPORT0_TX;
+		break;
+	case CH_SPORT1_RX:
+		ret_irq = IRQ_SPORT1_RX;
+		break;
+	case CH_SPORT1_TX:
+		ret_irq = IRQ_SPORT1_TX;
+		break;
+	case CH_SPI:
+		ret_irq = IRQ_SPI;
+		break;
+	case CH_UART_RX:
+		ret_irq = IRQ_UART_RX;
+		break;
+	case CH_UART_TX:
+		ret_irq = IRQ_UART_TX;
+		break;
+
+	case CH_MEM_STREAM0_SRC:
+	case CH_MEM_STREAM0_DEST:
+		ret_irq = IRQ_MEM_DMA0;
+		break;
+	case CH_MEM_STREAM1_SRC:
+	case CH_MEM_STREAM1_DEST:
+		ret_irq = IRQ_MEM_DMA1;
+		break;
+	case CH_MEM_STREAM2_SRC:
+	case CH_MEM_STREAM2_DEST:
+		ret_irq = IRQ_MEM_DMA2;
+		break;
+	case CH_MEM_STREAM3_SRC:
+	case CH_MEM_STREAM3_DEST:
+		ret_irq = IRQ_MEM_DMA3;
+		break;
+
+	case CH_IMEM_STREAM0_SRC:
+	case CH_IMEM_STREAM0_DEST:
+		ret_irq = IRQ_IMEM_DMA0;
+		break;
+	case CH_IMEM_STREAM1_SRC:
+	case CH_IMEM_STREAM1_DEST:
+		ret_irq = IRQ_IMEM_DMA1;
+		break;
+	}
+	return ret_irq;
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/hotplug.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/hotplug.c
new file mode 100644
index 0000000..0123117
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/hotplug.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *               Graff Yang <graf.yang@analog.com>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/smp.h>
+#include <asm/blackfin.h>
+#include <asm/cacheflush.h>
+#include <mach/pll.h>
+
+int hotplug_coreb;
+
+void platform_cpu_die(void)
+{
+	unsigned long iwr;
+
+	hotplug_coreb = 1;
+
+	/*
+	 * When CoreB wakes up, the code in _coreb_trampoline_start cannot
+	 * turn off the data cache. This causes the CoreB failed to boot.
+	 * As a workaround, we invalidate all the data cache before sleep.
+	 */
+	blackfin_invalidate_entire_dcache();
+
+	/* disable core timer */
+	bfin_write_TCNTL(0);
+
+	/* clear ipi interrupt IRQ_SUPPLE_0 of CoreB */
+	bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (10 + 1)));
+	SSYNC();
+
+	/* set CoreB wakeup by ipi0, iwr will be discarded */
+	bfin_iwr_set_sup0(&iwr, &iwr, &iwr);
+	SSYNC();
+
+	coreb_die();
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/anomaly.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/anomaly.h
new file mode 100644
index 0000000..038249c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -0,0 +1,353 @@
+/*
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
+ *
+ * Copyright 2004-2011 Analog Devices Inc.
+ * Licensed under the Clear BSD license.
+ */
+
+/* This file should be up to date with:
+ *  - Revision S, 05/23/2011; ADSP-BF561 Blackfin Processor Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* We do not support 0.1, 0.2, or 0.4 silicon - sorry */
+#if __SILICON_REVISION__ < 3 || __SILICON_REVISION__ == 4
+# error will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4
+#endif
+
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
+#define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
+/* TESTSET Instructions Restricted to 32-Bit Aligned Memory Locations */
+#define ANOMALY_05000120 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* SIGNBITS Instruction Not Functional under Certain Conditions */
+#define ANOMALY_05000127 (1)
+/* IMDMA S1/D1 Channel May Stall */
+#define ANOMALY_05000149 (1)
+/* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */
+#define ANOMALY_05000156 (__SILICON_REVISION__ < 4)
+/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
+#define ANOMALY_05000166 (1)
+/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
+#define ANOMALY_05000167 (1)
+/* Undefined Behavior when Power-Up Sequence Is Issued to SDRAM during Auto-Refresh */
+#define ANOMALY_05000168 (__SILICON_REVISION__ < 5)
+/* DATA CPLB Page Miss Can Result in Lost Write-Through Data Cache Writes */
+#define ANOMALY_05000169 (__SILICON_REVISION__ < 5)
+/* Boot-ROM Modifies SICA_IWRx Wakeup Registers */
+#define ANOMALY_05000171 (__SILICON_REVISION__ < 5)
+/* Cache Fill Buffer Data lost */
+#define ANOMALY_05000174 (__SILICON_REVISION__ < 5)
+/* Overlapping Sequencer and Memory Stalls */
+#define ANOMALY_05000175 (__SILICON_REVISION__ < 5)
+/* Overflow Bit Asserted when Multiplication of -1 by -1 Followed by Accumulator Saturation */
+#define ANOMALY_05000176 (__SILICON_REVISION__ < 5)
+/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
+#define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
+#define ANOMALY_05000180 (1)
+/* Disabling the PPI Resets the PPI Configuration Registers */
+#define ANOMALY_05000181 (__SILICON_REVISION__ < 5)
+/* Internal Memory DMA Does Not Operate at Full Speed */
+#define ANOMALY_05000182 (1)
+/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */
+#define ANOMALY_05000184 (__SILICON_REVISION__ < 5)
+/* Early PPI Transmit when FS1 Asserts before FS2 in TX Mode with 2 External Frame Syncs */
+#define ANOMALY_05000185 (__SILICON_REVISION__ < 5)
+/* Upper PPI Pins Driven when PPI Packing Enabled and Data Length >8 Bits */
+#define ANOMALY_05000186 (__SILICON_REVISION__ < 5)
+/* IMDMA Corrupted Data after a Halt */
+#define ANOMALY_05000187 (1)
+/* IMDMA Restrictions on Descriptor and Buffer Placement in Memory */
+#define ANOMALY_05000188 (__SILICON_REVISION__ < 5)
+/* False Protection Exceptions when Speculative Fetch Is Cancelled */
+#define ANOMALY_05000189 (__SILICON_REVISION__ < 5)
+/* PPI Not Functional at Core Voltage < 1Volt */
+#define ANOMALY_05000190 (1)
+/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */
+#define ANOMALY_05000193 (__SILICON_REVISION__ < 5)
+/* Restarting SPORT in Specific Modes May Cause Data Corruption */
+#define ANOMALY_05000194 (__SILICON_REVISION__ < 5)
+/* Failing MMR Accesses when Preceding Memory Read Stalls */
+#define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
+/* Current DMA Address Shows Wrong Value During Carry Fix */
+#define ANOMALY_05000199 (__SILICON_REVISION__ < 5)
+/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */
+#define ANOMALY_05000200 (__SILICON_REVISION__ < 5)
+/* Possible Infinite Stall with Specific Dual-DAG Situation */
+#define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
+/* Incorrect Data Read with Writethrough "Allocate Cache Lines on Reads Only" Cache Mode */
+#define ANOMALY_05000204 (__SILICON_REVISION__ < 5)
+/* Specific Sequence that Can Cause DMA Error or DMA Stopping */
+#define ANOMALY_05000205 (__SILICON_REVISION__ < 5)
+/* Recovery from "Brown-Out" Condition */
+#define ANOMALY_05000207 (__SILICON_REVISION__ < 5)
+/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */
+#define ANOMALY_05000208 (1)
+/* Speed Path in Computational Unit Affects Certain Instructions */
+#define ANOMALY_05000209 (__SILICON_REVISION__ < 5)
+/* UART TX Interrupt Masked Erroneously */
+#define ANOMALY_05000215 (__SILICON_REVISION__ < 5)
+/* NMI Event at Boot Time Results in Unpredictable State */
+#define ANOMALY_05000219 (__SILICON_REVISION__ < 5)
+/* Data Corruption/Core Hang with L2/L3 Configured in Writeback Cache Mode */
+#define ANOMALY_05000220 (__SILICON_REVISION__ < 4)
+/* Incorrect Pulse-Width of UART Start Bit */
+#define ANOMALY_05000225 (__SILICON_REVISION__ < 5)
+/* Scratchpad Memory Bank Reads May Return Incorrect Data */
+#define ANOMALY_05000227 (__SILICON_REVISION__ < 5)
+/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */
+#define ANOMALY_05000230 (__SILICON_REVISION__ < 5)
+/* UART STB Bit Incorrectly Affects Receiver Setting */
+#define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
+/* SPORT Data Transmit Lines Are Incorrectly Driven in Multichannel Mode */
+#define ANOMALY_05000232 (__SILICON_REVISION__ < 5)
+/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
+#define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (__SILICON_REVISION__ < 5)
+/* TESTSET Operation Forces Stall on the Other Core */
+#define ANOMALY_05000248 (__SILICON_REVISION__ < 5)
+/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
+#define ANOMALY_05000250 (__SILICON_REVISION__ > 2 && __SILICON_REVISION__ < 5)
+/* Exception Not Generated for MMR Accesses in Reserved Region */
+#define ANOMALY_05000251 (__SILICON_REVISION__ < 5)
+/* Maximum External Clock Speed for Timers */
+#define ANOMALY_05000253 (__SILICON_REVISION__ < 5)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (__SILICON_REVISION__ > 3)
+/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
+/* Tempoary work around for kgdb bug 6333 in SMP kernel. It looks coreb hangs in exception
+ * without handling anomaly 05000257 properly on bf561 v0.5. This work around may change
+ * after the behavior and the root cause are confirmed with hardware team.
+ */
+#define ANOMALY_05000257 (__SILICON_REVISION__ < 5 || (__SILICON_REVISION__ == 5 && CONFIG_SMP))
+/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */
+#define ANOMALY_05000258 (__SILICON_REVISION__ < 5)
+/* ICPLB_STATUS MMR Register May Be Corrupted */
+#define ANOMALY_05000260 (__SILICON_REVISION__ < 5)
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 5)
+/* Stores To Data Cache May Be Lost */
+#define ANOMALY_05000262 (__SILICON_REVISION__ < 5)
+/* Hardware Loop Corrupted When Taking an ICPLB Exception */
+#define ANOMALY_05000263 (__SILICON_REVISION__ < 5)
+/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
+#define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (__SILICON_REVISION__ < 5)
+/* IMDMA Destination IRQ Status Must Be Read Prior to Using IMDMA */
+#define ANOMALY_05000266 (__SILICON_REVISION__ > 3)
+/* IMDMA May Corrupt Data under Certain Conditions */
+#define ANOMALY_05000267 (1)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
+#define ANOMALY_05000269 (1)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
+#define ANOMALY_05000270 (1)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* Data Cache Write Back to External Synchronous Memory May Be Lost */
+#define ANOMALY_05000274 (1)
+/* PPI Timing and Sampling Information Updates */
+#define ANOMALY_05000275 (__SILICON_REVISION__ > 2)
+/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
+#define ANOMALY_05000276 (__SILICON_REVISION__ < 5)
+/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
+#define ANOMALY_05000277 (__SILICON_REVISION__ < 5)
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
+#define ANOMALY_05000278 (__SILICON_REVISION__ < 5)
+/* False Hardware Error when ISR Context Is Not Restored */
+/* Temporarily walk around for bug 5423 till this issue is confirmed by
+ * official anomaly document. It looks 05000281 still exists on bf561
+ * v0.5.
+ */
+#define ANOMALY_05000281 (__SILICON_REVISION__ <= 5)
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
+#define ANOMALY_05000283 (1)
+/* Reads Will Receive Incorrect Data under Certain Conditions */
+#define ANOMALY_05000287 (__SILICON_REVISION__ < 5)
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 5)
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
+#define ANOMALY_05000301 (1)
+/* SSYNCs after Writes to DMA MMR Registers May Not Be Handled Correctly */
+#define ANOMALY_05000302 (1)
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
+#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
+#define ANOMALY_05000313 (1)
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
+#define ANOMALY_05000315 (1)
+/* PF2 Output Remains Asserted after SPI Master Boot */
+#define ANOMALY_05000320 (__SILICON_REVISION__ > 3)
+/* Erroneous GPIO Flag Pin Operations under Specific Sequences */
+#define ANOMALY_05000323 (1)
+/* SPORT Secondary Receive Channel Not Functional when Word Length >16 Bits */
+#define ANOMALY_05000326 (__SILICON_REVISION__ > 3)
+/* 24-Bit SPI Boot Mode Is Not Functional */
+#define ANOMALY_05000331 (__SILICON_REVISION__ < 5)
+/* Slave SPI Boot Mode Is Not Functional */
+#define ANOMALY_05000332 (__SILICON_REVISION__ < 5)
+/* Flag Data Register Writes One SCLK Cycle after Edge Is Detected May Clear Interrupt Status */
+#define ANOMALY_05000333 (__SILICON_REVISION__ < 5)
+/* ALT_TIMING Bit in PLL_CTL Register Is Not Functional */
+#define ANOMALY_05000339 (__SILICON_REVISION__ < 5)
+/* Memory DMA FIFO Causes Throughput Degradation on Writes to External Memory */
+#define ANOMALY_05000343 (__SILICON_REVISION__ < 5)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* Conflicting Column Address Widths Causes SDRAM Errors */
+#define ANOMALY_05000362 (1)
+/* UART Break Signal Issues */
+#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
+/* TESTSET Instruction Causes Data Corruption with Writeback Data Cache Enabled */
+#define ANOMALY_05000412 (1)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* Lost/Corrupted L2/L3 Memory Write after Speculative L2 Memory Read by Core B */
+#define ANOMALY_05000428 (__SILICON_REVISION__ > 3)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
+/* SCKELOW Feature Is Not Functional */
+#define ANOMALY_05000458 (1)
+/* False Hardware Error when RETI Points to Invalid Memory */
+#define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
+/* Boot Failure When SDRAM Control Signals Toggle Coming Out Of Reset */
+#define ANOMALY_05000471 (1)
+/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */
+#define ANOMALY_05000473 (1)
+/* Possible Lockup Condition when Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* PLL May Latch Incorrect Values Coming Out of Reset */
+#define ANOMALY_05000489 (1)
+/* Instruction Memory Stalls Can Cause IFLUSH to Fail */
+#define ANOMALY_05000491 (1)
+/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */
+#define ANOMALY_05000494 (1)
+/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */
+#define ANOMALY_05000501 (1)
+
+/*
+ * These anomalies have been "phased" out of analog.com anomaly sheets and are
+ * here to show running on older silicon just isn't feasible.
+ */
+
+/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */
+#define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
+/* Erroneous Exception when Enabling Cache */
+#define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
+/* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */
+#define ANOMALY_05000134 (__SILICON_REVISION__ < 3)
+/* Enable wires from the Data Watchpoint Address Control Register (WPDACTL) are swapped */
+#define ANOMALY_05000135 (__SILICON_REVISION__ < 3)
+/* Stall in multi-unit DMA operations */
+#define ANOMALY_05000136 (__SILICON_REVISION__ < 3)
+/* Allowing the SPORT RX FIFO to fill will cause an overflow */
+#define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
+/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */
+#define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
+/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
+#define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
+/* DMA and TESTSET conflict when both are accessing external memory */
+#define ANOMALY_05000144 (__SILICON_REVISION__ < 3)
+/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */
+#define ANOMALY_05000145 (__SILICON_REVISION__ < 3)
+/* MDMA may lose the first few words of a descriptor chain */
+#define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
+/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */
+#define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
+/* DMA engine may lose data due to incorrect handshaking */
+#define ANOMALY_05000150 (__SILICON_REVISION__ < 3)
+/* DMA stalls when all three controllers read data from the same source */
+#define ANOMALY_05000151 (__SILICON_REVISION__ < 3)
+/* Execution stall when executing in L2 and doing external accesses */
+#define ANOMALY_05000152 (__SILICON_REVISION__ < 3)
+/* Frame Delay in SPORT Multichannel Mode */
+#define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
+/* SPORT TFS signal stays active in multichannel mode outside of valid channels */
+#define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
+/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */
+#define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
+/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
+#define ANOMALY_05000159 (__SILICON_REVISION__ < 3)
+/* A read from external memory may return a wrong value with data cache enabled */
+#define ANOMALY_05000160 (__SILICON_REVISION__ < 3)
+/* Data Cache Fill data can be corrupted after/during Instruction DMA if certain core stalls exist */
+#define ANOMALY_05000161 (__SILICON_REVISION__ < 3)
+/* DMEM_CONTROL<12> is not set on Reset */
+#define ANOMALY_05000162 (__SILICON_REVISION__ < 3)
+/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */
+#define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
+/* DSPID register values incorrect */
+#define ANOMALY_05000172 (__SILICON_REVISION__ < 3)
+/* DMA vs Core accesses to external memory */
+#define ANOMALY_05000173 (__SILICON_REVISION__ < 3)
+/* PPI does not invert the Driving PPICLK edge in Transmit Modes */
+#define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 4)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000119 (0)
+#define ANOMALY_05000158 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
+#define ANOMALY_05000273 (0)
+#define ANOMALY_05000311 (0)
+#define ANOMALY_05000353 (1)
+#define ANOMALY_05000364 (0)
+#define ANOMALY_05000380 (0)
+#define ANOMALY_05000383 (0)
+#define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
+#define ANOMALY_05000430 (0)
+#define ANOMALY_05000432 (0)
+#define ANOMALY_05000435 (0)
+#define ANOMALY_05000440 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000480 (0)
+#define ANOMALY_05000485 (0)
+#define ANOMALY_16000030 (0)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/bf561.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/bf561.h
new file mode 100644
index 0000000..9f9a367
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/bf561.h
@@ -0,0 +1,200 @@
+/*
+ * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ *
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __MACH_BF561_H__
+#define __MACH_BF561_H__
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15		0x8000
+#define IMASK_IVG14		0x4000
+#define IMASK_IVG13		0x2000
+#define IMASK_IVG12		0x1000
+
+#define IMASK_IVG11		0x0800
+#define IMASK_IVG10		0x0400
+#define IMASK_IVG9		0x0200
+#define IMASK_IVG8		0x0100
+
+#define IMASK_IVG7		0x0080
+#define IMASK_IVGTMR		0x0040
+#define IMASK_IVGHW		0x0020
+
+/***************************
+ * Blackfin Cache setup
+ */
+
+
+#define BFIN_ISUBBANKS	4
+#define BFIN_IWAYS		4
+#define BFIN_ILINES		32
+
+#define BFIN_DSUBBANKS	4
+#define BFIN_DWAYS		2
+#define BFIN_DLINES		64
+
+#define WAY0_L			0x1
+#define WAY1_L			0x2
+#define WAY01_L			0x3
+#define WAY2_L			0x4
+#define WAY02_L			0x5
+#define	WAY12_L			0x6
+#define	WAY012_L		0x7
+
+#define	WAY3_L			0x8
+#define	WAY03_L			0x9
+#define	WAY13_L			0xA
+#define	WAY013_L		0xB
+
+#define	WAY32_L			0xC
+#define	WAY320_L		0xD
+#define	WAY321_L		0xE
+#define	WAYALL_L		0xF
+
+#define DMC_ENABLE (2<<2)	/*yes, 2, not 1 */
+
+/* IAR0 BIT FIELDS */
+#define	PLL_WAKEUP_BIT		0xFFFFFFFF
+#define	DMA1_ERROR_BIT		0xFFFFFF0F
+#define	DMA2_ERROR_BIT		0xFFFFF0FF
+#define IMDMA_ERROR_BIT		0xFFFF0FFF
+#define	PPI1_ERROR_BIT		0xFFF0FFFF
+#define	PPI2_ERROR_BIT		0xFF0FFFFF
+#define	SPORT0_ERROR_BIT	0xF0FFFFFF
+#define	SPORT1_ERROR_BIT	0x0FFFFFFF
+/* IAR1 BIT FIELDS */
+#define	SPI_ERROR_BIT		0xFFFFFFFF
+#define	UART_ERROR_BIT		0xFFFFFF0F
+#define RESERVED_ERROR_BIT	0xFFFFF0FF
+#define	DMA1_0_BIT		0xFFFF0FFF
+#define	DMA1_1_BIT		0xFFF0FFFF
+#define	DMA1_2_BIT		0xFF0FFFFF
+#define	DMA1_3_BIT		0xF0FFFFFF
+#define	DMA1_4_BIT		0x0FFFFFFF
+/* IAR2 BIT FIELDS */
+#define	DMA1_5_BIT		0xFFFFFFFF
+#define	DMA1_6_BIT		0xFFFFFF0F
+#define	DMA1_7_BIT		0xFFFFF0FF
+#define	DMA1_8_BIT		0xFFFF0FFF
+#define	DMA1_9_BIT		0xFFF0FFFF
+#define	DMA1_10_BIT		0xFF0FFFFF
+#define	DMA1_11_BIT		0xF0FFFFFF
+#define	DMA2_0_BIT		0x0FFFFFFF
+/* IAR3 BIT FIELDS */
+#define	DMA2_1_BIT		0xFFFFFFFF
+#define	DMA2_2_BIT		0xFFFFFF0F
+#define	DMA2_3_BIT		0xFFFFF0FF
+#define	DMA2_4_BIT		0xFFFF0FFF
+#define	DMA2_5_BIT		0xFFF0FFFF
+#define	DMA2_6_BIT		0xFF0FFFFF
+#define	DMA2_7_BIT		0xF0FFFFFF
+#define	DMA2_8_BIT		0x0FFFFFFF
+/* IAR4 BIT FIELDS */
+#define	DMA2_9_BIT		0xFFFFFFFF
+#define	DMA2_10_BIT             0xFFFFFF0F
+#define	DMA2_11_BIT             0xFFFFF0FF
+#define TIMER0_BIT	        0xFFFF0FFF
+#define TIMER1_BIT              0xFFF0FFFF
+#define TIMER2_BIT              0xFF0FFFFF
+#define TIMER3_BIT              0xF0FFFFFF
+#define TIMER4_BIT              0x0FFFFFFF
+/* IAR5 BIT FIELDS */
+#define TIMER5_BIT		0xFFFFFFFF
+#define TIMER6_BIT              0xFFFFFF0F
+#define TIMER7_BIT              0xFFFFF0FF
+#define TIMER8_BIT              0xFFFF0FFF
+#define TIMER9_BIT              0xFFF0FFFF
+#define TIMER10_BIT             0xFF0FFFFF
+#define TIMER11_BIT             0xF0FFFFFF
+#define	PROG0_INTA_BIT	        0x0FFFFFFF
+/* IAR6 BIT FIELDS */
+#define	PROG0_INTB_BIT		0xFFFFFFFF
+#define	PROG1_INTA_BIT          0xFFFFFF0F
+#define	PROG1_INTB_BIT          0xFFFFF0FF
+#define	PROG2_INTA_BIT          0xFFFF0FFF
+#define	PROG2_INTB_BIT          0xFFF0FFFF
+#define DMA1_WRRD0_BIT          0xFF0FFFFF
+#define DMA1_WRRD1_BIT          0xF0FFFFFF
+#define DMA2_WRRD0_BIT          0x0FFFFFFF
+/* IAR7 BIT FIELDS */
+#define DMA2_WRRD1_BIT		0xFFFFFFFF
+#define IMDMA_WRRD0_BIT         0xFFFFFF0F
+#define IMDMA_WRRD1_BIT         0xFFFFF0FF
+#define	WATCH_BIT	        0xFFFF0FFF
+#define RESERVED_1_BIT	        0xFFF0FFFF
+#define RESERVED_2_BIT	        0xFF0FFFFF
+#define SUPPLE_0_BIT	        0xF0FFFFFF
+#define SUPPLE_1_BIT	        0x0FFFFFFF
+
+/* Miscellaneous Values */
+
+/****************************** EBIU Settings ********************************/
+#define AMBCTL0VAL	((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL	((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#if defined(CONFIG_C_AMBEN_ALL)
+#define V_AMBEN AMBEN_ALL
+#elif defined(CONFIG_C_AMBEN)
+#define V_AMBEN 0x0
+#elif defined(CONFIG_C_AMBEN_B0)
+#define V_AMBEN AMBEN_B0
+#elif defined(CONFIG_C_AMBEN_B0_B1)
+#define V_AMBEN AMBEN_B0_B1
+#elif defined(CONFIG_C_AMBEN_B0_B1_B2)
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+
+#ifdef CONFIG_C_B0PEN
+#define V_B0PEN 0x10
+#else
+#define V_B0PEN 0x00
+#endif
+
+#ifdef CONFIG_C_B1PEN
+#define V_B1PEN 0x20
+#else
+#define V_B1PEN 0x00
+#endif
+
+#ifdef CONFIG_C_B2PEN
+#define V_B2PEN 0x40
+#else
+#define V_B2PEN 0x00
+#endif
+
+#ifdef CONFIG_C_B3PEN
+#define V_B3PEN 0x80
+#else
+#define V_B3PEN 0x00
+#endif
+
+#ifdef CONFIG_C_CDPRIO
+#define V_CDPRIO 0x100
+#else
+#define V_CDPRIO 0x0
+#endif
+
+#define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO | V_B0PEN | V_B1PEN | V_B2PEN | V_B3PEN | 0x0002)
+
+#ifdef CONFIG_BF561
+#define CPU "BF561"
+#define CPUID 0x27bb
+#endif
+
+#ifndef CPU
+#error "Unknown CPU type - This kernel doesn't seem to be configured properly"
+#endif
+
+#endif				/* __MACH_BF561_H__  */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/bfin_serial.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/bfin_serial.h
new file mode 100644
index 0000000..08072c8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/bfin_serial.h
@@ -0,0 +1,14 @@
+/*
+ * mach/bfin_serial.h - Blackfin UART/Serial definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_SERIAL_H__
+#define __BFIN_MACH_SERIAL_H__
+
+#define BFIN_UART_NR_PORTS	1
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/blackfin.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/blackfin.h
new file mode 100644
index 0000000..dc47053
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/blackfin.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#define BF561_FAMILY
+
+#include "bf561.h"
+#include "anomaly.h"
+
+#include <asm/def_LPBlackfin.h>
+#include "defBF561.h"
+
+#ifndef __ASSEMBLY__
+# include <asm/cdef_LPBlackfin.h>
+# include "cdefBF561.h"
+#endif
+
+#define bfin_read_FIO_FLAG_D() bfin_read_FIO0_FLAG_D()
+#define bfin_write_FIO_FLAG_D(val) bfin_write_FIO0_FLAG_D(val)
+#define bfin_read_FIO_DIR() bfin_read_FIO0_DIR()
+#define bfin_write_FIO_DIR(val) bfin_write_FIO0_DIR(val)
+#define bfin_read_FIO_INEN() bfin_read_FIO0_INEN()
+#define bfin_write_FIO_INEN(val) bfin_write_FIO0_INEN(val)
+
+/* Weird muxer funcs which pick SIC regs from IMASK base */
+#define __SIC_MUX(base, x)		((base) + ((x) << 2))
+#define bfin_read_SIC_IMASK(x)		bfin_read32(__SIC_MUX(SIC_IMASK0, x))
+#define bfin_write_SIC_IMASK(x, val)	bfin_write32(__SIC_MUX(SIC_IMASK0, x), val)
+#define bfin_read_SICB_IMASK(x)		bfin_read32(__SIC_MUX(SICB_IMASK0, x))
+#define bfin_write_SICB_IMASK(x, val)	bfin_write32(__SIC_MUX(SICB_IMASK0, x), val)
+#define bfin_read_SIC_ISR(x)		bfin_read32(__SIC_MUX(SIC_ISR0, x))
+#define bfin_write_SIC_ISR(x, val)	bfin_write32(__SIC_MUX(SIC_ISR0, x), val)
+#define bfin_read_SICB_ISR(x)		bfin_read32(__SIC_MUX(SICB_ISR0, x))
+#define bfin_write_SICB_ISR(x, val)	bfin_write32(__SIC_MUX(SICB_ISR0, x), val)
+
+#endif				/* _MACH_BLACKFIN_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/cdefBF561.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
new file mode 100644
index 0000000..7533315
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
@@ -0,0 +1,1460 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _CDEF_BF561_H
+#define _CDEF_BF561_H
+
+/*********************************************************************************** */
+/* System MMR Register Map */
+/*********************************************************************************** */
+
+/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
+#define bfin_read_PLL_CTL()                  bfin_read16(PLL_CTL)
+#define bfin_read_PLL_DIV()                  bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val)              bfin_write16(PLL_DIV,val)
+#define bfin_read_VR_CTL()                   bfin_read16(VR_CTL)
+#define bfin_read_PLL_STAT()                 bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val)             bfin_write16(PLL_STAT,val)
+#define bfin_read_PLL_LOCKCNT()              bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val)          bfin_write16(PLL_LOCKCNT,val)
+#define bfin_read_CHIPID()                   bfin_read32(CHIPID)
+
+/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
+#define bfin_read_SWRST()                    bfin_read16(SWRST)
+#define bfin_write_SWRST(val)                bfin_write16(SWRST,val)
+#define bfin_read_SYSCR()                    bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val)                bfin_write16(SYSCR,val)
+#define bfin_read_SIC_RVECT()                bfin_read16(SIC_RVECT)
+#define bfin_write_SIC_RVECT(val)            bfin_write16(SIC_RVECT,val)
+#define bfin_read_SIC_IMASK0()               bfin_read32(SIC_IMASK0)
+#define bfin_write_SIC_IMASK0(val)           bfin_write32(SIC_IMASK0,val)
+#define bfin_read_SIC_IMASK1()               bfin_read32(SIC_IMASK1)
+#define bfin_write_SIC_IMASK1(val)           bfin_write32(SIC_IMASK1,val)
+#define bfin_read_SIC_IAR0()                 bfin_read32(SIC_IAR0)
+#define bfin_write_SIC_IAR0(val)             bfin_write32(SIC_IAR0,val)
+#define bfin_read_SIC_IAR1()                 bfin_read32(SIC_IAR1)
+#define bfin_write_SIC_IAR1(val)             bfin_write32(SIC_IAR1,val)
+#define bfin_read_SIC_IAR2()                 bfin_read32(SIC_IAR2)
+#define bfin_write_SIC_IAR2(val)             bfin_write32(SIC_IAR2,val)
+#define bfin_read_SIC_IAR3()                 bfin_read32(SIC_IAR3)
+#define bfin_write_SIC_IAR3(val)             bfin_write32(SIC_IAR3,val)
+#define bfin_read_SIC_IAR4()                 bfin_read32(SIC_IAR4)
+#define bfin_write_SIC_IAR4(val)             bfin_write32(SIC_IAR4,val)
+#define bfin_read_SIC_IAR5()                 bfin_read32(SIC_IAR5)
+#define bfin_write_SIC_IAR5(val)             bfin_write32(SIC_IAR5,val)
+#define bfin_read_SIC_IAR6()                 bfin_read32(SIC_IAR6)
+#define bfin_write_SIC_IAR6(val)             bfin_write32(SIC_IAR6,val)
+#define bfin_read_SIC_IAR7()                 bfin_read32(SIC_IAR7)
+#define bfin_write_SIC_IAR7(val)             bfin_write32(SIC_IAR7,val)
+#define bfin_read_SIC_ISR0()                 bfin_read32(SIC_ISR0)
+#define bfin_write_SIC_ISR0(val)             bfin_write32(SIC_ISR0,val)
+#define bfin_read_SIC_ISR1()                 bfin_read32(SIC_ISR1)
+#define bfin_write_SIC_ISR1(val)             bfin_write32(SIC_ISR1,val)
+#define bfin_read_SIC_IWR0()                 bfin_read32(SIC_IWR0)
+#define bfin_write_SIC_IWR0(val)             bfin_write32(SIC_IWR0,val)
+#define bfin_read_SIC_IWR1()                 bfin_read32(SIC_IWR1)
+#define bfin_write_SIC_IWR1(val)             bfin_write32(SIC_IWR1,val)
+
+/* System Reset and Interrupt Controller registers for Core B (0xFFC0 1100-0xFFC0 11FF) */
+#define bfin_read_SICB_SWRST()               bfin_read16(SICB_SWRST)
+#define bfin_write_SICB_SWRST(val)           bfin_write16(SICB_SWRST,val)
+#define bfin_read_SICB_SYSCR()               bfin_read16(SICB_SYSCR)
+#define bfin_write_SICB_SYSCR(val)           bfin_write16(SICB_SYSCR,val)
+#define bfin_read_SICB_RVECT()               bfin_read16(SICB_RVECT)
+#define bfin_write_SICB_RVECT(val)           bfin_write16(SICB_RVECT,val)
+#define bfin_read_SICB_IMASK0()              bfin_read32(SICB_IMASK0)
+#define bfin_write_SICB_IMASK0(val)          bfin_write32(SICB_IMASK0,val)
+#define bfin_read_SICB_IMASK1()              bfin_read32(SICB_IMASK1)
+#define bfin_write_SICB_IMASK1(val)          bfin_write32(SICB_IMASK1,val)
+#define bfin_read_SICB_IAR0()                bfin_read32(SICB_IAR0)
+#define bfin_write_SICB_IAR0(val)            bfin_write32(SICB_IAR0,val)
+#define bfin_read_SICB_IAR1()                bfin_read32(SICB_IAR1)
+#define bfin_write_SICB_IAR1(val)            bfin_write32(SICB_IAR1,val)
+#define bfin_read_SICB_IAR2()                bfin_read32(SICB_IAR2)
+#define bfin_write_SICB_IAR2(val)            bfin_write32(SICB_IAR2,val)
+#define bfin_read_SICB_IAR3()                bfin_read32(SICB_IAR3)
+#define bfin_write_SICB_IAR3(val)            bfin_write32(SICB_IAR3,val)
+#define bfin_read_SICB_IAR4()                bfin_read32(SICB_IAR4)
+#define bfin_write_SICB_IAR4(val)            bfin_write32(SICB_IAR4,val)
+#define bfin_read_SICB_IAR5()                bfin_read32(SICB_IAR5)
+#define bfin_write_SICB_IAR5(val)            bfin_write32(SICB_IAR5,val)
+#define bfin_read_SICB_IAR6()                bfin_read32(SICB_IAR6)
+#define bfin_write_SICB_IAR6(val)            bfin_write32(SICB_IAR6,val)
+#define bfin_read_SICB_IAR7()                bfin_read32(SICB_IAR7)
+#define bfin_write_SICB_IAR7(val)            bfin_write32(SICB_IAR7,val)
+#define bfin_read_SICB_ISR0()                bfin_read32(SICB_ISR0)
+#define bfin_write_SICB_ISR0(val)            bfin_write32(SICB_ISR0,val)
+#define bfin_read_SICB_ISR1()                bfin_read32(SICB_ISR1)
+#define bfin_write_SICB_ISR1(val)            bfin_write32(SICB_ISR1,val)
+#define bfin_read_SICB_IWR0()                bfin_read32(SICB_IWR0)
+#define bfin_write_SICB_IWR0(val)            bfin_write32(SICB_IWR0,val)
+#define bfin_read_SICB_IWR1()                bfin_read32(SICB_IWR1)
+#define bfin_write_SICB_IWR1(val)            bfin_write32(SICB_IWR1,val)
+/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */
+#define bfin_read_WDOGA_CTL()                bfin_read16(WDOGA_CTL)
+#define bfin_write_WDOGA_CTL(val)            bfin_write16(WDOGA_CTL,val)
+#define bfin_read_WDOGA_CNT()                bfin_read32(WDOGA_CNT)
+#define bfin_write_WDOGA_CNT(val)            bfin_write32(WDOGA_CNT,val)
+#define bfin_read_WDOGA_STAT()               bfin_read32(WDOGA_STAT)
+#define bfin_write_WDOGA_STAT(val)           bfin_write32(WDOGA_STAT,val)
+
+/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */
+#define bfin_read_WDOGB_CTL()                bfin_read16(WDOGB_CTL)
+#define bfin_write_WDOGB_CTL(val)            bfin_write16(WDOGB_CTL,val)
+#define bfin_read_WDOGB_CNT()                bfin_read32(WDOGB_CNT)
+#define bfin_write_WDOGB_CNT(val)            bfin_write32(WDOGB_CNT,val)
+#define bfin_read_WDOGB_STAT()               bfin_read32(WDOGB_STAT)
+#define bfin_write_WDOGB_STAT(val)           bfin_write32(WDOGB_STAT,val)
+
+/* UART Controller (0xFFC00400 - 0xFFC004FF) */
+#define bfin_read_UART_THR()                 bfin_read16(UART_THR)
+#define bfin_write_UART_THR(val)             bfin_write16(UART_THR,val)
+#define bfin_read_UART_RBR()                 bfin_read16(UART_RBR)
+#define bfin_write_UART_RBR(val)             bfin_write16(UART_RBR,val)
+#define bfin_read_UART_DLL()                 bfin_read16(UART_DLL)
+#define bfin_write_UART_DLL(val)             bfin_write16(UART_DLL,val)
+#define bfin_read_UART_IER()                 bfin_read16(UART_IER)
+#define bfin_write_UART_IER(val)             bfin_write16(UART_IER,val)
+#define bfin_read_UART_DLH()                 bfin_read16(UART_DLH)
+#define bfin_write_UART_DLH(val)             bfin_write16(UART_DLH,val)
+#define bfin_read_UART_IIR()                 bfin_read16(UART_IIR)
+#define bfin_write_UART_IIR(val)             bfin_write16(UART_IIR,val)
+#define bfin_read_UART_LCR()                 bfin_read16(UART_LCR)
+#define bfin_write_UART_LCR(val)             bfin_write16(UART_LCR,val)
+#define bfin_read_UART_MCR()                 bfin_read16(UART_MCR)
+#define bfin_write_UART_MCR(val)             bfin_write16(UART_MCR,val)
+#define bfin_read_UART_LSR()                 bfin_read16(UART_LSR)
+#define bfin_write_UART_LSR(val)             bfin_write16(UART_LSR,val)
+#define bfin_read_UART_MSR()                 bfin_read16(UART_MSR)
+#define bfin_write_UART_MSR(val)             bfin_write16(UART_MSR,val)
+#define bfin_read_UART_SCR()                 bfin_read16(UART_SCR)
+#define bfin_write_UART_SCR(val)             bfin_write16(UART_SCR,val)
+#define bfin_read_UART_GCTL()                bfin_read16(UART_GCTL)
+#define bfin_write_UART_GCTL(val)            bfin_write16(UART_GCTL,val)
+
+/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define bfin_read_SPI_CTL()                  bfin_read16(SPI_CTL)
+#define bfin_write_SPI_CTL(val)              bfin_write16(SPI_CTL,val)
+#define bfin_read_SPI_FLG()                  bfin_read16(SPI_FLG)
+#define bfin_write_SPI_FLG(val)              bfin_write16(SPI_FLG,val)
+#define bfin_read_SPI_STAT()                 bfin_read16(SPI_STAT)
+#define bfin_write_SPI_STAT(val)             bfin_write16(SPI_STAT,val)
+#define bfin_read_SPI_TDBR()                 bfin_read16(SPI_TDBR)
+#define bfin_write_SPI_TDBR(val)             bfin_write16(SPI_TDBR,val)
+#define bfin_read_SPI_RDBR()                 bfin_read16(SPI_RDBR)
+#define bfin_write_SPI_RDBR(val)             bfin_write16(SPI_RDBR,val)
+#define bfin_read_SPI_BAUD()                 bfin_read16(SPI_BAUD)
+#define bfin_write_SPI_BAUD(val)             bfin_write16(SPI_BAUD,val)
+#define bfin_read_SPI_SHADOW()               bfin_read16(SPI_SHADOW)
+#define bfin_write_SPI_SHADOW(val)           bfin_write16(SPI_SHADOW,val)
+
+/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */
+#define bfin_read_TIMER0_CONFIG()            bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val)        bfin_write16(TIMER0_CONFIG,val)
+#define bfin_read_TIMER0_COUNTER()           bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val)       bfin_write32(TIMER0_COUNTER,val)
+#define bfin_read_TIMER0_PERIOD()            bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val)        bfin_write32(TIMER0_PERIOD,val)
+#define bfin_read_TIMER0_WIDTH()             bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val)         bfin_write32(TIMER0_WIDTH,val)
+#define bfin_read_TIMER1_CONFIG()            bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val)        bfin_write16(TIMER1_CONFIG,val)
+#define bfin_read_TIMER1_COUNTER()           bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val)       bfin_write32(TIMER1_COUNTER,val)
+#define bfin_read_TIMER1_PERIOD()            bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val)        bfin_write32(TIMER1_PERIOD,val)
+#define bfin_read_TIMER1_WIDTH()             bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val)         bfin_write32(TIMER1_WIDTH,val)
+#define bfin_read_TIMER2_CONFIG()            bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val)        bfin_write16(TIMER2_CONFIG,val)
+#define bfin_read_TIMER2_COUNTER()           bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val)       bfin_write32(TIMER2_COUNTER,val)
+#define bfin_read_TIMER2_PERIOD()            bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val)        bfin_write32(TIMER2_PERIOD,val)
+#define bfin_read_TIMER2_WIDTH()             bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val)         bfin_write32(TIMER2_WIDTH,val)
+#define bfin_read_TIMER3_CONFIG()            bfin_read16(TIMER3_CONFIG)
+#define bfin_write_TIMER3_CONFIG(val)        bfin_write16(TIMER3_CONFIG,val)
+#define bfin_read_TIMER3_COUNTER()           bfin_read32(TIMER3_COUNTER)
+#define bfin_write_TIMER3_COUNTER(val)       bfin_write32(TIMER3_COUNTER,val)
+#define bfin_read_TIMER3_PERIOD()            bfin_read32(TIMER3_PERIOD)
+#define bfin_write_TIMER3_PERIOD(val)        bfin_write32(TIMER3_PERIOD,val)
+#define bfin_read_TIMER3_WIDTH()             bfin_read32(TIMER3_WIDTH)
+#define bfin_write_TIMER3_WIDTH(val)         bfin_write32(TIMER3_WIDTH,val)
+#define bfin_read_TIMER4_CONFIG()            bfin_read16(TIMER4_CONFIG)
+#define bfin_write_TIMER4_CONFIG(val)        bfin_write16(TIMER4_CONFIG,val)
+#define bfin_read_TIMER4_COUNTER()           bfin_read32(TIMER4_COUNTER)
+#define bfin_write_TIMER4_COUNTER(val)       bfin_write32(TIMER4_COUNTER,val)
+#define bfin_read_TIMER4_PERIOD()            bfin_read32(TIMER4_PERIOD)
+#define bfin_write_TIMER4_PERIOD(val)        bfin_write32(TIMER4_PERIOD,val)
+#define bfin_read_TIMER4_WIDTH()             bfin_read32(TIMER4_WIDTH)
+#define bfin_write_TIMER4_WIDTH(val)         bfin_write32(TIMER4_WIDTH,val)
+#define bfin_read_TIMER5_CONFIG()            bfin_read16(TIMER5_CONFIG)
+#define bfin_write_TIMER5_CONFIG(val)        bfin_write16(TIMER5_CONFIG,val)
+#define bfin_read_TIMER5_COUNTER()           bfin_read32(TIMER5_COUNTER)
+#define bfin_write_TIMER5_COUNTER(val)       bfin_write32(TIMER5_COUNTER,val)
+#define bfin_read_TIMER5_PERIOD()            bfin_read32(TIMER5_PERIOD)
+#define bfin_write_TIMER5_PERIOD(val)        bfin_write32(TIMER5_PERIOD,val)
+#define bfin_read_TIMER5_WIDTH()             bfin_read32(TIMER5_WIDTH)
+#define bfin_write_TIMER5_WIDTH(val)         bfin_write32(TIMER5_WIDTH,val)
+#define bfin_read_TIMER6_CONFIG()            bfin_read16(TIMER6_CONFIG)
+#define bfin_write_TIMER6_CONFIG(val)        bfin_write16(TIMER6_CONFIG,val)
+#define bfin_read_TIMER6_COUNTER()           bfin_read32(TIMER6_COUNTER)
+#define bfin_write_TIMER6_COUNTER(val)       bfin_write32(TIMER6_COUNTER,val)
+#define bfin_read_TIMER6_PERIOD()            bfin_read32(TIMER6_PERIOD)
+#define bfin_write_TIMER6_PERIOD(val)        bfin_write32(TIMER6_PERIOD,val)
+#define bfin_read_TIMER6_WIDTH()             bfin_read32(TIMER6_WIDTH)
+#define bfin_write_TIMER6_WIDTH(val)         bfin_write32(TIMER6_WIDTH,val)
+#define bfin_read_TIMER7_CONFIG()            bfin_read16(TIMER7_CONFIG)
+#define bfin_write_TIMER7_CONFIG(val)        bfin_write16(TIMER7_CONFIG,val)
+#define bfin_read_TIMER7_COUNTER()           bfin_read32(TIMER7_COUNTER)
+#define bfin_write_TIMER7_COUNTER(val)       bfin_write32(TIMER7_COUNTER,val)
+#define bfin_read_TIMER7_PERIOD()            bfin_read32(TIMER7_PERIOD)
+#define bfin_write_TIMER7_PERIOD(val)        bfin_write32(TIMER7_PERIOD,val)
+#define bfin_read_TIMER7_WIDTH()             bfin_read32(TIMER7_WIDTH)
+#define bfin_write_TIMER7_WIDTH(val)         bfin_write32(TIMER7_WIDTH,val)
+
+/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */
+#define bfin_read_TMRS8_ENABLE()             bfin_read16(TMRS8_ENABLE)
+#define bfin_write_TMRS8_ENABLE(val)         bfin_write16(TMRS8_ENABLE,val)
+#define bfin_read_TMRS8_DISABLE()            bfin_read16(TMRS8_DISABLE)
+#define bfin_write_TMRS8_DISABLE(val)        bfin_write16(TMRS8_DISABLE,val)
+#define bfin_read_TMRS8_STATUS()             bfin_read32(TMRS8_STATUS)
+#define bfin_write_TMRS8_STATUS(val)         bfin_write32(TMRS8_STATUS,val)
+#define bfin_read_TIMER8_CONFIG()            bfin_read16(TIMER8_CONFIG)
+#define bfin_write_TIMER8_CONFIG(val)        bfin_write16(TIMER8_CONFIG,val)
+#define bfin_read_TIMER8_COUNTER()           bfin_read32(TIMER8_COUNTER)
+#define bfin_write_TIMER8_COUNTER(val)       bfin_write32(TIMER8_COUNTER,val)
+#define bfin_read_TIMER8_PERIOD()            bfin_read32(TIMER8_PERIOD)
+#define bfin_write_TIMER8_PERIOD(val)        bfin_write32(TIMER8_PERIOD,val)
+#define bfin_read_TIMER8_WIDTH()             bfin_read32(TIMER8_WIDTH)
+#define bfin_write_TIMER8_WIDTH(val)         bfin_write32(TIMER8_WIDTH,val)
+#define bfin_read_TIMER9_CONFIG()            bfin_read16(TIMER9_CONFIG)
+#define bfin_write_TIMER9_CONFIG(val)        bfin_write16(TIMER9_CONFIG,val)
+#define bfin_read_TIMER9_COUNTER()           bfin_read32(TIMER9_COUNTER)
+#define bfin_write_TIMER9_COUNTER(val)       bfin_write32(TIMER9_COUNTER,val)
+#define bfin_read_TIMER9_PERIOD()            bfin_read32(TIMER9_PERIOD)
+#define bfin_write_TIMER9_PERIOD(val)        bfin_write32(TIMER9_PERIOD,val)
+#define bfin_read_TIMER9_WIDTH()             bfin_read32(TIMER9_WIDTH)
+#define bfin_write_TIMER9_WIDTH(val)         bfin_write32(TIMER9_WIDTH,val)
+#define bfin_read_TIMER10_CONFIG()           bfin_read16(TIMER10_CONFIG)
+#define bfin_write_TIMER10_CONFIG(val)       bfin_write16(TIMER10_CONFIG,val)
+#define bfin_read_TIMER10_COUNTER()          bfin_read32(TIMER10_COUNTER)
+#define bfin_write_TIMER10_COUNTER(val)      bfin_write32(TIMER10_COUNTER,val)
+#define bfin_read_TIMER10_PERIOD()           bfin_read32(TIMER10_PERIOD)
+#define bfin_write_TIMER10_PERIOD(val)       bfin_write32(TIMER10_PERIOD,val)
+#define bfin_read_TIMER10_WIDTH()            bfin_read32(TIMER10_WIDTH)
+#define bfin_write_TIMER10_WIDTH(val)        bfin_write32(TIMER10_WIDTH,val)
+#define bfin_read_TIMER11_CONFIG()           bfin_read16(TIMER11_CONFIG)
+#define bfin_write_TIMER11_CONFIG(val)       bfin_write16(TIMER11_CONFIG,val)
+#define bfin_read_TIMER11_COUNTER()          bfin_read32(TIMER11_COUNTER)
+#define bfin_write_TIMER11_COUNTER(val)      bfin_write32(TIMER11_COUNTER,val)
+#define bfin_read_TIMER11_PERIOD()           bfin_read32(TIMER11_PERIOD)
+#define bfin_write_TIMER11_PERIOD(val)       bfin_write32(TIMER11_PERIOD,val)
+#define bfin_read_TIMER11_WIDTH()            bfin_read32(TIMER11_WIDTH)
+#define bfin_write_TIMER11_WIDTH(val)        bfin_write32(TIMER11_WIDTH,val)
+#define bfin_read_TMRS4_ENABLE()             bfin_read16(TMRS4_ENABLE)
+#define bfin_write_TMRS4_ENABLE(val)         bfin_write16(TMRS4_ENABLE,val)
+#define bfin_read_TMRS4_DISABLE()            bfin_read16(TMRS4_DISABLE)
+#define bfin_write_TMRS4_DISABLE(val)        bfin_write16(TMRS4_DISABLE,val)
+#define bfin_read_TMRS4_STATUS()             bfin_read32(TMRS4_STATUS)
+#define bfin_write_TMRS4_STATUS(val)         bfin_write32(TMRS4_STATUS,val)
+
+/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */
+#define bfin_read_FIO0_FLAG_D()              bfin_read16(FIO0_FLAG_D)
+#define bfin_write_FIO0_FLAG_D(val)          bfin_write16(FIO0_FLAG_D,val)
+#define bfin_read_FIO0_FLAG_C()              bfin_read16(FIO0_FLAG_C)
+#define bfin_write_FIO0_FLAG_C(val)          bfin_write16(FIO0_FLAG_C,val)
+#define bfin_read_FIO0_FLAG_S()              bfin_read16(FIO0_FLAG_S)
+#define bfin_write_FIO0_FLAG_S(val)          bfin_write16(FIO0_FLAG_S,val)
+#define bfin_read_FIO0_FLAG_T()              bfin_read16(FIO0_FLAG_T)
+#define bfin_write_FIO0_FLAG_T(val)          bfin_write16(FIO0_FLAG_T,val)
+#define bfin_read_FIO0_MASKA_D()             bfin_read16(FIO0_MASKA_D)
+#define bfin_write_FIO0_MASKA_D(val)         bfin_write16(FIO0_MASKA_D,val)
+#define bfin_read_FIO0_MASKA_C()             bfin_read16(FIO0_MASKA_C)
+#define bfin_write_FIO0_MASKA_C(val)         bfin_write16(FIO0_MASKA_C,val)
+#define bfin_read_FIO0_MASKA_S()             bfin_read16(FIO0_MASKA_S)
+#define bfin_write_FIO0_MASKA_S(val)         bfin_write16(FIO0_MASKA_S,val)
+#define bfin_read_FIO0_MASKA_T()             bfin_read16(FIO0_MASKA_T)
+#define bfin_write_FIO0_MASKA_T(val)         bfin_write16(FIO0_MASKA_T,val)
+#define bfin_read_FIO0_MASKB_D()             bfin_read16(FIO0_MASKB_D)
+#define bfin_write_FIO0_MASKB_D(val)         bfin_write16(FIO0_MASKB_D,val)
+#define bfin_read_FIO0_MASKB_C()             bfin_read16(FIO0_MASKB_C)
+#define bfin_write_FIO0_MASKB_C(val)         bfin_write16(FIO0_MASKB_C,val)
+#define bfin_read_FIO0_MASKB_S()             bfin_read16(FIO0_MASKB_S)
+#define bfin_write_FIO0_MASKB_S(val)         bfin_write16(FIO0_MASKB_S,val)
+#define bfin_read_FIO0_MASKB_T()             bfin_read16(FIO0_MASKB_T)
+#define bfin_write_FIO0_MASKB_T(val)         bfin_write16(FIO0_MASKB_T,val)
+#define bfin_read_FIO0_DIR()                 bfin_read16(FIO0_DIR)
+#define bfin_write_FIO0_DIR(val)             bfin_write16(FIO0_DIR,val)
+#define bfin_read_FIO0_POLAR()               bfin_read16(FIO0_POLAR)
+#define bfin_write_FIO0_POLAR(val)           bfin_write16(FIO0_POLAR,val)
+#define bfin_read_FIO0_EDGE()                bfin_read16(FIO0_EDGE)
+#define bfin_write_FIO0_EDGE(val)            bfin_write16(FIO0_EDGE,val)
+#define bfin_read_FIO0_BOTH()                bfin_read16(FIO0_BOTH)
+#define bfin_write_FIO0_BOTH(val)            bfin_write16(FIO0_BOTH,val)
+#define bfin_read_FIO0_INEN()                bfin_read16(FIO0_INEN)
+#define bfin_write_FIO0_INEN(val)            bfin_write16(FIO0_INEN,val)
+/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */
+#define bfin_read_FIO1_FLAG_D()              bfin_read16(FIO1_FLAG_D)
+#define bfin_write_FIO1_FLAG_D(val)          bfin_write16(FIO1_FLAG_D,val)
+#define bfin_read_FIO1_FLAG_C()              bfin_read16(FIO1_FLAG_C)
+#define bfin_write_FIO1_FLAG_C(val)          bfin_write16(FIO1_FLAG_C,val)
+#define bfin_read_FIO1_FLAG_S()              bfin_read16(FIO1_FLAG_S)
+#define bfin_write_FIO1_FLAG_S(val)          bfin_write16(FIO1_FLAG_S,val)
+#define bfin_read_FIO1_FLAG_T()              bfin_read16(FIO1_FLAG_T)
+#define bfin_write_FIO1_FLAG_T(val)          bfin_write16(FIO1_FLAG_T,val)
+#define bfin_read_FIO1_MASKA_D()             bfin_read16(FIO1_MASKA_D)
+#define bfin_write_FIO1_MASKA_D(val)         bfin_write16(FIO1_MASKA_D,val)
+#define bfin_read_FIO1_MASKA_C()             bfin_read16(FIO1_MASKA_C)
+#define bfin_write_FIO1_MASKA_C(val)         bfin_write16(FIO1_MASKA_C,val)
+#define bfin_read_FIO1_MASKA_S()             bfin_read16(FIO1_MASKA_S)
+#define bfin_write_FIO1_MASKA_S(val)         bfin_write16(FIO1_MASKA_S,val)
+#define bfin_read_FIO1_MASKA_T()             bfin_read16(FIO1_MASKA_T)
+#define bfin_write_FIO1_MASKA_T(val)         bfin_write16(FIO1_MASKA_T,val)
+#define bfin_read_FIO1_MASKB_D()             bfin_read16(FIO1_MASKB_D)
+#define bfin_write_FIO1_MASKB_D(val)         bfin_write16(FIO1_MASKB_D,val)
+#define bfin_read_FIO1_MASKB_C()             bfin_read16(FIO1_MASKB_C)
+#define bfin_write_FIO1_MASKB_C(val)         bfin_write16(FIO1_MASKB_C,val)
+#define bfin_read_FIO1_MASKB_S()             bfin_read16(FIO1_MASKB_S)
+#define bfin_write_FIO1_MASKB_S(val)         bfin_write16(FIO1_MASKB_S,val)
+#define bfin_read_FIO1_MASKB_T()             bfin_read16(FIO1_MASKB_T)
+#define bfin_write_FIO1_MASKB_T(val)         bfin_write16(FIO1_MASKB_T,val)
+#define bfin_read_FIO1_DIR()                 bfin_read16(FIO1_DIR)
+#define bfin_write_FIO1_DIR(val)             bfin_write16(FIO1_DIR,val)
+#define bfin_read_FIO1_POLAR()               bfin_read16(FIO1_POLAR)
+#define bfin_write_FIO1_POLAR(val)           bfin_write16(FIO1_POLAR,val)
+#define bfin_read_FIO1_EDGE()                bfin_read16(FIO1_EDGE)
+#define bfin_write_FIO1_EDGE(val)            bfin_write16(FIO1_EDGE,val)
+#define bfin_read_FIO1_BOTH()                bfin_read16(FIO1_BOTH)
+#define bfin_write_FIO1_BOTH(val)            bfin_write16(FIO1_BOTH,val)
+#define bfin_read_FIO1_INEN()                bfin_read16(FIO1_INEN)
+#define bfin_write_FIO1_INEN(val)            bfin_write16(FIO1_INEN,val)
+/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */
+#define bfin_read_FIO2_FLAG_D()              bfin_read16(FIO2_FLAG_D)
+#define bfin_write_FIO2_FLAG_D(val)          bfin_write16(FIO2_FLAG_D,val)
+#define bfin_read_FIO2_FLAG_C()              bfin_read16(FIO2_FLAG_C)
+#define bfin_write_FIO2_FLAG_C(val)          bfin_write16(FIO2_FLAG_C,val)
+#define bfin_read_FIO2_FLAG_S()              bfin_read16(FIO2_FLAG_S)
+#define bfin_write_FIO2_FLAG_S(val)          bfin_write16(FIO2_FLAG_S,val)
+#define bfin_read_FIO2_FLAG_T()              bfin_read16(FIO2_FLAG_T)
+#define bfin_write_FIO2_FLAG_T(val)          bfin_write16(FIO2_FLAG_T,val)
+#define bfin_read_FIO2_MASKA_D()             bfin_read16(FIO2_MASKA_D)
+#define bfin_write_FIO2_MASKA_D(val)         bfin_write16(FIO2_MASKA_D,val)
+#define bfin_read_FIO2_MASKA_C()             bfin_read16(FIO2_MASKA_C)
+#define bfin_write_FIO2_MASKA_C(val)         bfin_write16(FIO2_MASKA_C,val)
+#define bfin_read_FIO2_MASKA_S()             bfin_read16(FIO2_MASKA_S)
+#define bfin_write_FIO2_MASKA_S(val)         bfin_write16(FIO2_MASKA_S,val)
+#define bfin_read_FIO2_MASKA_T()             bfin_read16(FIO2_MASKA_T)
+#define bfin_write_FIO2_MASKA_T(val)         bfin_write16(FIO2_MASKA_T,val)
+#define bfin_read_FIO2_MASKB_D()             bfin_read16(FIO2_MASKB_D)
+#define bfin_write_FIO2_MASKB_D(val)         bfin_write16(FIO2_MASKB_D,val)
+#define bfin_read_FIO2_MASKB_C()             bfin_read16(FIO2_MASKB_C)
+#define bfin_write_FIO2_MASKB_C(val)         bfin_write16(FIO2_MASKB_C,val)
+#define bfin_read_FIO2_MASKB_S()             bfin_read16(FIO2_MASKB_S)
+#define bfin_write_FIO2_MASKB_S(val)         bfin_write16(FIO2_MASKB_S,val)
+#define bfin_read_FIO2_MASKB_T()             bfin_read16(FIO2_MASKB_T)
+#define bfin_write_FIO2_MASKB_T(val)         bfin_write16(FIO2_MASKB_T,val)
+#define bfin_read_FIO2_DIR()                 bfin_read16(FIO2_DIR)
+#define bfin_write_FIO2_DIR(val)             bfin_write16(FIO2_DIR,val)
+#define bfin_read_FIO2_POLAR()               bfin_read16(FIO2_POLAR)
+#define bfin_write_FIO2_POLAR(val)           bfin_write16(FIO2_POLAR,val)
+#define bfin_read_FIO2_EDGE()                bfin_read16(FIO2_EDGE)
+#define bfin_write_FIO2_EDGE(val)            bfin_write16(FIO2_EDGE,val)
+#define bfin_read_FIO2_BOTH()                bfin_read16(FIO2_BOTH)
+#define bfin_write_FIO2_BOTH(val)            bfin_write16(FIO2_BOTH,val)
+#define bfin_read_FIO2_INEN()                bfin_read16(FIO2_INEN)
+#define bfin_write_FIO2_INEN(val)            bfin_write16(FIO2_INEN,val)
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define bfin_read_SPORT0_TCR1()              bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val)          bfin_write16(SPORT0_TCR1,val)
+#define bfin_read_SPORT0_TCR2()              bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val)          bfin_write16(SPORT0_TCR2,val)
+#define bfin_read_SPORT0_TCLKDIV()           bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val)       bfin_write16(SPORT0_TCLKDIV,val)
+#define bfin_read_SPORT0_TFSDIV()            bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val)        bfin_write16(SPORT0_TFSDIV,val)
+#define bfin_read_SPORT0_TX()                bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val)            bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX()                bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val)            bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX32()              bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX32(val)          bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX32()              bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX32(val)          bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX16()              bfin_read16(SPORT0_TX)
+#define bfin_write_SPORT0_TX16(val)          bfin_write16(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX16()              bfin_read16(SPORT0_RX)
+#define bfin_write_SPORT0_RX16(val)          bfin_write16(SPORT0_RX,val)
+#define bfin_read_SPORT0_RCR1()              bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val)          bfin_write16(SPORT0_RCR1,val)
+#define bfin_read_SPORT0_RCR2()              bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val)          bfin_write16(SPORT0_RCR2,val)
+#define bfin_read_SPORT0_RCLKDIV()           bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val)       bfin_write16(SPORT0_RCLKDIV,val)
+#define bfin_read_SPORT0_RFSDIV()            bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val)        bfin_write16(SPORT0_RFSDIV,val)
+#define bfin_read_SPORT0_STAT()              bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val)          bfin_write16(SPORT0_STAT,val)
+#define bfin_read_SPORT0_CHNL()              bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val)          bfin_write16(SPORT0_CHNL,val)
+#define bfin_read_SPORT0_MCMC1()             bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val)         bfin_write16(SPORT0_MCMC1,val)
+#define bfin_read_SPORT0_MCMC2()             bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val)         bfin_write16(SPORT0_MCMC2,val)
+#define bfin_read_SPORT0_MTCS0()             bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val)         bfin_write32(SPORT0_MTCS0,val)
+#define bfin_read_SPORT0_MTCS1()             bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val)         bfin_write32(SPORT0_MTCS1,val)
+#define bfin_read_SPORT0_MTCS2()             bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val)         bfin_write32(SPORT0_MTCS2,val)
+#define bfin_read_SPORT0_MTCS3()             bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val)         bfin_write32(SPORT0_MTCS3,val)
+#define bfin_read_SPORT0_MRCS0()             bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val)         bfin_write32(SPORT0_MRCS0,val)
+#define bfin_read_SPORT0_MRCS1()             bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val)         bfin_write32(SPORT0_MRCS1,val)
+#define bfin_read_SPORT0_MRCS2()             bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val)         bfin_write32(SPORT0_MRCS2,val)
+#define bfin_read_SPORT0_MRCS3()             bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val)         bfin_write32(SPORT0_MRCS3,val)
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define bfin_read_SPORT1_TCR1()              bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val)          bfin_write16(SPORT1_TCR1,val)
+#define bfin_read_SPORT1_TCR2()              bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val)          bfin_write16(SPORT1_TCR2,val)
+#define bfin_read_SPORT1_TCLKDIV()           bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val)       bfin_write16(SPORT1_TCLKDIV,val)
+#define bfin_read_SPORT1_TFSDIV()            bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val)        bfin_write16(SPORT1_TFSDIV,val)
+#define bfin_read_SPORT1_TX()                bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val)            bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX()                bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val)            bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX32()              bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX32(val)          bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX32()              bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX32(val)          bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX16()              bfin_read16(SPORT1_TX)
+#define bfin_write_SPORT1_TX16(val)          bfin_write16(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX16()              bfin_read16(SPORT1_RX)
+#define bfin_write_SPORT1_RX16(val)          bfin_write16(SPORT1_RX,val)
+#define bfin_read_SPORT1_RCR1()              bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val)          bfin_write16(SPORT1_RCR1,val)
+#define bfin_read_SPORT1_RCR2()              bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val)          bfin_write16(SPORT1_RCR2,val)
+#define bfin_read_SPORT1_RCLKDIV()           bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val)       bfin_write16(SPORT1_RCLKDIV,val)
+#define bfin_read_SPORT1_RFSDIV()            bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val)        bfin_write16(SPORT1_RFSDIV,val)
+#define bfin_read_SPORT1_STAT()              bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val)          bfin_write16(SPORT1_STAT,val)
+#define bfin_read_SPORT1_CHNL()              bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val)          bfin_write16(SPORT1_CHNL,val)
+#define bfin_read_SPORT1_MCMC1()             bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val)         bfin_write16(SPORT1_MCMC1,val)
+#define bfin_read_SPORT1_MCMC2()             bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val)         bfin_write16(SPORT1_MCMC2,val)
+#define bfin_read_SPORT1_MTCS0()             bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val)         bfin_write32(SPORT1_MTCS0,val)
+#define bfin_read_SPORT1_MTCS1()             bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val)         bfin_write32(SPORT1_MTCS1,val)
+#define bfin_read_SPORT1_MTCS2()             bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val)         bfin_write32(SPORT1_MTCS2,val)
+#define bfin_read_SPORT1_MTCS3()             bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val)         bfin_write32(SPORT1_MTCS3,val)
+#define bfin_read_SPORT1_MRCS0()             bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val)         bfin_write32(SPORT1_MRCS0,val)
+#define bfin_read_SPORT1_MRCS1()             bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val)         bfin_write32(SPORT1_MRCS1,val)
+#define bfin_read_SPORT1_MRCS2()             bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val)         bfin_write32(SPORT1_MRCS2,val)
+#define bfin_read_SPORT1_MRCS3()             bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val)         bfin_write32(SPORT1_MRCS3,val)
+/* Asynchronous Memory Controller - External Bus Interface Unit */
+#define bfin_read_EBIU_AMGCTL()              bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val)          bfin_write16(EBIU_AMGCTL,val)
+#define bfin_read_EBIU_AMBCTL0()             bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val)         bfin_write32(EBIU_AMBCTL0,val)
+#define bfin_read_EBIU_AMBCTL1()             bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val)         bfin_write32(EBIU_AMBCTL1,val)
+/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+#define bfin_read_EBIU_SDGCTL()              bfin_read32(EBIU_SDGCTL)
+#define bfin_write_EBIU_SDGCTL(val)          bfin_write32(EBIU_SDGCTL,val)
+#define bfin_read_EBIU_SDBCTL()              bfin_read32(EBIU_SDBCTL)
+#define bfin_write_EBIU_SDBCTL(val)          bfin_write32(EBIU_SDBCTL,val)
+#define bfin_read_EBIU_SDRRC()               bfin_read16(EBIU_SDRRC)
+#define bfin_write_EBIU_SDRRC(val)           bfin_write16(EBIU_SDRRC,val)
+#define bfin_read_EBIU_SDSTAT()              bfin_read16(EBIU_SDSTAT)
+#define bfin_write_EBIU_SDSTAT(val)          bfin_write16(EBIU_SDSTAT,val)
+/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */
+#define bfin_read_PPI0_CONTROL()             bfin_read16(PPI0_CONTROL)
+#define bfin_write_PPI0_CONTROL(val)         bfin_write16(PPI0_CONTROL,val)
+#define bfin_read_PPI0_STATUS()              bfin_read16(PPI0_STATUS)
+#define bfin_write_PPI0_STATUS(val)          bfin_write16(PPI0_STATUS,val)
+#define bfin_clear_PPI0_STATUS()             bfin_read_PPI0_STATUS()
+#define bfin_read_PPI0_COUNT()               bfin_read16(PPI0_COUNT)
+#define bfin_write_PPI0_COUNT(val)           bfin_write16(PPI0_COUNT,val)
+#define bfin_read_PPI0_DELAY()               bfin_read16(PPI0_DELAY)
+#define bfin_write_PPI0_DELAY(val)           bfin_write16(PPI0_DELAY,val)
+#define bfin_read_PPI0_FRAME()               bfin_read16(PPI0_FRAME)
+#define bfin_write_PPI0_FRAME(val)           bfin_write16(PPI0_FRAME,val)
+/* Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */
+#define bfin_read_PPI1_CONTROL()             bfin_read16(PPI1_CONTROL)
+#define bfin_write_PPI1_CONTROL(val)         bfin_write16(PPI1_CONTROL,val)
+#define bfin_read_PPI1_STATUS()              bfin_read16(PPI1_STATUS)
+#define bfin_write_PPI1_STATUS(val)          bfin_write16(PPI1_STATUS,val)
+#define bfin_clear_PPI1_STATUS()             bfin_read_PPI1_STATUS()
+#define bfin_read_PPI1_COUNT()               bfin_read16(PPI1_COUNT)
+#define bfin_write_PPI1_COUNT(val)           bfin_write16(PPI1_COUNT,val)
+#define bfin_read_PPI1_DELAY()               bfin_read16(PPI1_DELAY)
+#define bfin_write_PPI1_DELAY(val)           bfin_write16(PPI1_DELAY,val)
+#define bfin_read_PPI1_FRAME()               bfin_read16(PPI1_FRAME)
+#define bfin_write_PPI1_FRAME(val)           bfin_write16(PPI1_FRAME,val)
+/*DMA traffic control registers */
+#define bfin_read_DMAC0_TC_PER()             bfin_read16(DMAC0_TC_PER)
+#define bfin_write_DMAC0_TC_PER(val)         bfin_write16(DMAC0_TC_PER,val)
+#define bfin_read_DMAC0_TC_CNT()             bfin_read16(DMAC0_TC_CNT)
+#define bfin_write_DMAC0_TC_CNT(val)         bfin_write16(DMAC0_TC_CNT,val)
+#define bfin_read_DMAC1_TC_PER()             bfin_read16(DMAC1_TC_PER)
+#define bfin_write_DMAC1_TC_PER(val)         bfin_write16(DMAC1_TC_PER,val)
+#define bfin_read_DMAC1_TC_CNT()             bfin_read16(DMAC1_TC_CNT)
+#define bfin_write_DMAC1_TC_CNT(val)         bfin_write16(DMAC1_TC_CNT,val)
+/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */
+#define bfin_read_DMA1_0_CONFIG()            bfin_read16(DMA1_0_CONFIG)
+#define bfin_write_DMA1_0_CONFIG(val)        bfin_write16(DMA1_0_CONFIG,val)
+#define bfin_read_DMA1_0_NEXT_DESC_PTR()     bfin_read32(DMA1_0_NEXT_DESC_PTR)
+#define bfin_write_DMA1_0_NEXT_DESC_PTR(val) bfin_write32(DMA1_0_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_0_START_ADDR()        bfin_read32(DMA1_0_START_ADDR)
+#define bfin_write_DMA1_0_START_ADDR(val)    bfin_write32(DMA1_0_START_ADDR,val)
+#define bfin_read_DMA1_0_X_COUNT()           bfin_read16(DMA1_0_X_COUNT)
+#define bfin_write_DMA1_0_X_COUNT(val)       bfin_write16(DMA1_0_X_COUNT,val)
+#define bfin_read_DMA1_0_Y_COUNT()           bfin_read16(DMA1_0_Y_COUNT)
+#define bfin_write_DMA1_0_Y_COUNT(val)       bfin_write16(DMA1_0_Y_COUNT,val)
+#define bfin_read_DMA1_0_X_MODIFY()          bfin_read16(DMA1_0_X_MODIFY)
+#define bfin_write_DMA1_0_X_MODIFY(val)      bfin_write16(DMA1_0_X_MODIFY,val)
+#define bfin_read_DMA1_0_Y_MODIFY()          bfin_read16(DMA1_0_Y_MODIFY)
+#define bfin_write_DMA1_0_Y_MODIFY(val)      bfin_write16(DMA1_0_Y_MODIFY,val)
+#define bfin_read_DMA1_0_CURR_DESC_PTR()     bfin_read32(DMA1_0_CURR_DESC_PTR)
+#define bfin_write_DMA1_0_CURR_DESC_PTR(val) bfin_write32(DMA1_0_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_0_CURR_ADDR()         bfin_read32(DMA1_0_CURR_ADDR)
+#define bfin_write_DMA1_0_CURR_ADDR(val)     bfin_write32(DMA1_0_CURR_ADDR,val)
+#define bfin_read_DMA1_0_CURR_X_COUNT()      bfin_read16(DMA1_0_CURR_X_COUNT)
+#define bfin_write_DMA1_0_CURR_X_COUNT(val)  bfin_write16(DMA1_0_CURR_X_COUNT,val)
+#define bfin_read_DMA1_0_CURR_Y_COUNT()      bfin_read16(DMA1_0_CURR_Y_COUNT)
+#define bfin_write_DMA1_0_CURR_Y_COUNT(val)  bfin_write16(DMA1_0_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_0_IRQ_STATUS()        bfin_read16(DMA1_0_IRQ_STATUS)
+#define bfin_write_DMA1_0_IRQ_STATUS(val)    bfin_write16(DMA1_0_IRQ_STATUS,val)
+#define bfin_read_DMA1_0_PERIPHERAL_MAP()    bfin_read16(DMA1_0_PERIPHERAL_MAP)
+#define bfin_write_DMA1_0_PERIPHERAL_MAP(val) bfin_write16(DMA1_0_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_1_CONFIG()            bfin_read16(DMA1_1_CONFIG)
+#define bfin_write_DMA1_1_CONFIG(val)        bfin_write16(DMA1_1_CONFIG,val)
+#define bfin_read_DMA1_1_NEXT_DESC_PTR()     bfin_read32(DMA1_1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_1_NEXT_DESC_PTR(val) bfin_write32(DMA1_1_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_1_START_ADDR()        bfin_read32(DMA1_1_START_ADDR)
+#define bfin_write_DMA1_1_START_ADDR(val)    bfin_write32(DMA1_1_START_ADDR,val)
+#define bfin_read_DMA1_1_X_COUNT()           bfin_read16(DMA1_1_X_COUNT)
+#define bfin_write_DMA1_1_X_COUNT(val)       bfin_write16(DMA1_1_X_COUNT,val)
+#define bfin_read_DMA1_1_Y_COUNT()           bfin_read16(DMA1_1_Y_COUNT)
+#define bfin_write_DMA1_1_Y_COUNT(val)       bfin_write16(DMA1_1_Y_COUNT,val)
+#define bfin_read_DMA1_1_X_MODIFY()          bfin_read16(DMA1_1_X_MODIFY)
+#define bfin_write_DMA1_1_X_MODIFY(val)      bfin_write16(DMA1_1_X_MODIFY,val)
+#define bfin_read_DMA1_1_Y_MODIFY()          bfin_read16(DMA1_1_Y_MODIFY)
+#define bfin_write_DMA1_1_Y_MODIFY(val)      bfin_write16(DMA1_1_Y_MODIFY,val)
+#define bfin_read_DMA1_1_CURR_DESC_PTR()     bfin_read32(DMA1_1_CURR_DESC_PTR)
+#define bfin_write_DMA1_1_CURR_DESC_PTR(val) bfin_write32(DMA1_1_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_1_CURR_ADDR()         bfin_read32(DMA1_1_CURR_ADDR)
+#define bfin_write_DMA1_1_CURR_ADDR(val)     bfin_write32(DMA1_1_CURR_ADDR,val)
+#define bfin_read_DMA1_1_CURR_X_COUNT()      bfin_read16(DMA1_1_CURR_X_COUNT)
+#define bfin_write_DMA1_1_CURR_X_COUNT(val)  bfin_write16(DMA1_1_CURR_X_COUNT,val)
+#define bfin_read_DMA1_1_CURR_Y_COUNT()      bfin_read16(DMA1_1_CURR_Y_COUNT)
+#define bfin_write_DMA1_1_CURR_Y_COUNT(val)  bfin_write16(DMA1_1_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_1_IRQ_STATUS()        bfin_read16(DMA1_1_IRQ_STATUS)
+#define bfin_write_DMA1_1_IRQ_STATUS(val)    bfin_write16(DMA1_1_IRQ_STATUS,val)
+#define bfin_read_DMA1_1_PERIPHERAL_MAP()    bfin_read16(DMA1_1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_1_PERIPHERAL_MAP(val) bfin_write16(DMA1_1_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_2_CONFIG()            bfin_read16(DMA1_2_CONFIG)
+#define bfin_write_DMA1_2_CONFIG(val)        bfin_write16(DMA1_2_CONFIG,val)
+#define bfin_read_DMA1_2_NEXT_DESC_PTR()     bfin_read32(DMA1_2_NEXT_DESC_PTR)
+#define bfin_write_DMA1_2_NEXT_DESC_PTR(val) bfin_write32(DMA1_2_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_2_START_ADDR()        bfin_read32(DMA1_2_START_ADDR)
+#define bfin_write_DMA1_2_START_ADDR(val)    bfin_write32(DMA1_2_START_ADDR,val)
+#define bfin_read_DMA1_2_X_COUNT()           bfin_read16(DMA1_2_X_COUNT)
+#define bfin_write_DMA1_2_X_COUNT(val)       bfin_write16(DMA1_2_X_COUNT,val)
+#define bfin_read_DMA1_2_Y_COUNT()           bfin_read16(DMA1_2_Y_COUNT)
+#define bfin_write_DMA1_2_Y_COUNT(val)       bfin_write16(DMA1_2_Y_COUNT,val)
+#define bfin_read_DMA1_2_X_MODIFY()          bfin_read16(DMA1_2_X_MODIFY)
+#define bfin_write_DMA1_2_X_MODIFY(val)      bfin_write16(DMA1_2_X_MODIFY,val)
+#define bfin_read_DMA1_2_Y_MODIFY()          bfin_read16(DMA1_2_Y_MODIFY)
+#define bfin_write_DMA1_2_Y_MODIFY(val)      bfin_write16(DMA1_2_Y_MODIFY,val)
+#define bfin_read_DMA1_2_CURR_DESC_PTR()     bfin_read32(DMA1_2_CURR_DESC_PTR)
+#define bfin_write_DMA1_2_CURR_DESC_PTR(val) bfin_write32(DMA1_2_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_2_CURR_ADDR()         bfin_read32(DMA1_2_CURR_ADDR)
+#define bfin_write_DMA1_2_CURR_ADDR(val)     bfin_write32(DMA1_2_CURR_ADDR,val)
+#define bfin_read_DMA1_2_CURR_X_COUNT()      bfin_read16(DMA1_2_CURR_X_COUNT)
+#define bfin_write_DMA1_2_CURR_X_COUNT(val)  bfin_write16(DMA1_2_CURR_X_COUNT,val)
+#define bfin_read_DMA1_2_CURR_Y_COUNT()      bfin_read16(DMA1_2_CURR_Y_COUNT)
+#define bfin_write_DMA1_2_CURR_Y_COUNT(val)  bfin_write16(DMA1_2_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_2_IRQ_STATUS()        bfin_read16(DMA1_2_IRQ_STATUS)
+#define bfin_write_DMA1_2_IRQ_STATUS(val)    bfin_write16(DMA1_2_IRQ_STATUS,val)
+#define bfin_read_DMA1_2_PERIPHERAL_MAP()    bfin_read16(DMA1_2_PERIPHERAL_MAP)
+#define bfin_write_DMA1_2_PERIPHERAL_MAP(val) bfin_write16(DMA1_2_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_3_CONFIG()            bfin_read16(DMA1_3_CONFIG)
+#define bfin_write_DMA1_3_CONFIG(val)        bfin_write16(DMA1_3_CONFIG,val)
+#define bfin_read_DMA1_3_NEXT_DESC_PTR()     bfin_read32(DMA1_3_NEXT_DESC_PTR)
+#define bfin_write_DMA1_3_NEXT_DESC_PTR(val) bfin_write32(DMA1_3_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_3_START_ADDR()        bfin_read32(DMA1_3_START_ADDR)
+#define bfin_write_DMA1_3_START_ADDR(val)    bfin_write32(DMA1_3_START_ADDR,val)
+#define bfin_read_DMA1_3_X_COUNT()           bfin_read16(DMA1_3_X_COUNT)
+#define bfin_write_DMA1_3_X_COUNT(val)       bfin_write16(DMA1_3_X_COUNT,val)
+#define bfin_read_DMA1_3_Y_COUNT()           bfin_read16(DMA1_3_Y_COUNT)
+#define bfin_write_DMA1_3_Y_COUNT(val)       bfin_write16(DMA1_3_Y_COUNT,val)
+#define bfin_read_DMA1_3_X_MODIFY()          bfin_read16(DMA1_3_X_MODIFY)
+#define bfin_write_DMA1_3_X_MODIFY(val)      bfin_write16(DMA1_3_X_MODIFY,val)
+#define bfin_read_DMA1_3_Y_MODIFY()          bfin_read16(DMA1_3_Y_MODIFY)
+#define bfin_write_DMA1_3_Y_MODIFY(val)      bfin_write16(DMA1_3_Y_MODIFY,val)
+#define bfin_read_DMA1_3_CURR_DESC_PTR()     bfin_read32(DMA1_3_CURR_DESC_PTR)
+#define bfin_write_DMA1_3_CURR_DESC_PTR(val) bfin_write32(DMA1_3_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_3_CURR_ADDR()         bfin_read32(DMA1_3_CURR_ADDR)
+#define bfin_write_DMA1_3_CURR_ADDR(val)     bfin_write32(DMA1_3_CURR_ADDR,val)
+#define bfin_read_DMA1_3_CURR_X_COUNT()      bfin_read16(DMA1_3_CURR_X_COUNT)
+#define bfin_write_DMA1_3_CURR_X_COUNT(val)  bfin_write16(DMA1_3_CURR_X_COUNT,val)
+#define bfin_read_DMA1_3_CURR_Y_COUNT()      bfin_read16(DMA1_3_CURR_Y_COUNT)
+#define bfin_write_DMA1_3_CURR_Y_COUNT(val)  bfin_write16(DMA1_3_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_3_IRQ_STATUS()        bfin_read16(DMA1_3_IRQ_STATUS)
+#define bfin_write_DMA1_3_IRQ_STATUS(val)    bfin_write16(DMA1_3_IRQ_STATUS,val)
+#define bfin_read_DMA1_3_PERIPHERAL_MAP()    bfin_read16(DMA1_3_PERIPHERAL_MAP)
+#define bfin_write_DMA1_3_PERIPHERAL_MAP(val) bfin_write16(DMA1_3_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_4_CONFIG()            bfin_read16(DMA1_4_CONFIG)
+#define bfin_write_DMA1_4_CONFIG(val)        bfin_write16(DMA1_4_CONFIG,val)
+#define bfin_read_DMA1_4_NEXT_DESC_PTR()     bfin_read32(DMA1_4_NEXT_DESC_PTR)
+#define bfin_write_DMA1_4_NEXT_DESC_PTR(val) bfin_write32(DMA1_4_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_4_START_ADDR()        bfin_read32(DMA1_4_START_ADDR)
+#define bfin_write_DMA1_4_START_ADDR(val)    bfin_write32(DMA1_4_START_ADDR,val)
+#define bfin_read_DMA1_4_X_COUNT()           bfin_read16(DMA1_4_X_COUNT)
+#define bfin_write_DMA1_4_X_COUNT(val)       bfin_write16(DMA1_4_X_COUNT,val)
+#define bfin_read_DMA1_4_Y_COUNT()           bfin_read16(DMA1_4_Y_COUNT)
+#define bfin_write_DMA1_4_Y_COUNT(val)       bfin_write16(DMA1_4_Y_COUNT,val)
+#define bfin_read_DMA1_4_X_MODIFY()          bfin_read16(DMA1_4_X_MODIFY)
+#define bfin_write_DMA1_4_X_MODIFY(val)      bfin_write16(DMA1_4_X_MODIFY,val)
+#define bfin_read_DMA1_4_Y_MODIFY()          bfin_read16(DMA1_4_Y_MODIFY)
+#define bfin_write_DMA1_4_Y_MODIFY(val)      bfin_write16(DMA1_4_Y_MODIFY,val)
+#define bfin_read_DMA1_4_CURR_DESC_PTR()     bfin_read32(DMA1_4_CURR_DESC_PTR)
+#define bfin_write_DMA1_4_CURR_DESC_PTR(val) bfin_write32(DMA1_4_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_4_CURR_ADDR()         bfin_read32(DMA1_4_CURR_ADDR)
+#define bfin_write_DMA1_4_CURR_ADDR(val)     bfin_write32(DMA1_4_CURR_ADDR,val)
+#define bfin_read_DMA1_4_CURR_X_COUNT()      bfin_read16(DMA1_4_CURR_X_COUNT)
+#define bfin_write_DMA1_4_CURR_X_COUNT(val)  bfin_write16(DMA1_4_CURR_X_COUNT,val)
+#define bfin_read_DMA1_4_CURR_Y_COUNT()      bfin_read16(DMA1_4_CURR_Y_COUNT)
+#define bfin_write_DMA1_4_CURR_Y_COUNT(val)  bfin_write16(DMA1_4_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_4_IRQ_STATUS()        bfin_read16(DMA1_4_IRQ_STATUS)
+#define bfin_write_DMA1_4_IRQ_STATUS(val)    bfin_write16(DMA1_4_IRQ_STATUS,val)
+#define bfin_read_DMA1_4_PERIPHERAL_MAP()    bfin_read16(DMA1_4_PERIPHERAL_MAP)
+#define bfin_write_DMA1_4_PERIPHERAL_MAP(val) bfin_write16(DMA1_4_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_5_CONFIG()            bfin_read16(DMA1_5_CONFIG)
+#define bfin_write_DMA1_5_CONFIG(val)        bfin_write16(DMA1_5_CONFIG,val)
+#define bfin_read_DMA1_5_NEXT_DESC_PTR()     bfin_read32(DMA1_5_NEXT_DESC_PTR)
+#define bfin_write_DMA1_5_NEXT_DESC_PTR(val) bfin_write32(DMA1_5_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_5_START_ADDR()        bfin_read32(DMA1_5_START_ADDR)
+#define bfin_write_DMA1_5_START_ADDR(val)    bfin_write32(DMA1_5_START_ADDR,val)
+#define bfin_read_DMA1_5_X_COUNT()           bfin_read16(DMA1_5_X_COUNT)
+#define bfin_write_DMA1_5_X_COUNT(val)       bfin_write16(DMA1_5_X_COUNT,val)
+#define bfin_read_DMA1_5_Y_COUNT()           bfin_read16(DMA1_5_Y_COUNT)
+#define bfin_write_DMA1_5_Y_COUNT(val)       bfin_write16(DMA1_5_Y_COUNT,val)
+#define bfin_read_DMA1_5_X_MODIFY()          bfin_read16(DMA1_5_X_MODIFY)
+#define bfin_write_DMA1_5_X_MODIFY(val)      bfin_write16(DMA1_5_X_MODIFY,val)
+#define bfin_read_DMA1_5_Y_MODIFY()          bfin_read16(DMA1_5_Y_MODIFY)
+#define bfin_write_DMA1_5_Y_MODIFY(val)      bfin_write16(DMA1_5_Y_MODIFY,val)
+#define bfin_read_DMA1_5_CURR_DESC_PTR()     bfin_read32(DMA1_5_CURR_DESC_PTR)
+#define bfin_write_DMA1_5_CURR_DESC_PTR(val) bfin_write32(DMA1_5_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_5_CURR_ADDR()         bfin_read32(DMA1_5_CURR_ADDR)
+#define bfin_write_DMA1_5_CURR_ADDR(val)     bfin_write32(DMA1_5_CURR_ADDR,val)
+#define bfin_read_DMA1_5_CURR_X_COUNT()      bfin_read16(DMA1_5_CURR_X_COUNT)
+#define bfin_write_DMA1_5_CURR_X_COUNT(val)  bfin_write16(DMA1_5_CURR_X_COUNT,val)
+#define bfin_read_DMA1_5_CURR_Y_COUNT()      bfin_read16(DMA1_5_CURR_Y_COUNT)
+#define bfin_write_DMA1_5_CURR_Y_COUNT(val)  bfin_write16(DMA1_5_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_5_IRQ_STATUS()        bfin_read16(DMA1_5_IRQ_STATUS)
+#define bfin_write_DMA1_5_IRQ_STATUS(val)    bfin_write16(DMA1_5_IRQ_STATUS,val)
+#define bfin_read_DMA1_5_PERIPHERAL_MAP()    bfin_read16(DMA1_5_PERIPHERAL_MAP)
+#define bfin_write_DMA1_5_PERIPHERAL_MAP(val) bfin_write16(DMA1_5_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_6_CONFIG()            bfin_read16(DMA1_6_CONFIG)
+#define bfin_write_DMA1_6_CONFIG(val)        bfin_write16(DMA1_6_CONFIG,val)
+#define bfin_read_DMA1_6_NEXT_DESC_PTR()     bfin_read32(DMA1_6_NEXT_DESC_PTR)
+#define bfin_write_DMA1_6_NEXT_DESC_PTR(val) bfin_write32(DMA1_6_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_6_START_ADDR()        bfin_read32(DMA1_6_START_ADDR)
+#define bfin_write_DMA1_6_START_ADDR(val)    bfin_write32(DMA1_6_START_ADDR,val)
+#define bfin_read_DMA1_6_X_COUNT()           bfin_read16(DMA1_6_X_COUNT)
+#define bfin_write_DMA1_6_X_COUNT(val)       bfin_write16(DMA1_6_X_COUNT,val)
+#define bfin_read_DMA1_6_Y_COUNT()           bfin_read16(DMA1_6_Y_COUNT)
+#define bfin_write_DMA1_6_Y_COUNT(val)       bfin_write16(DMA1_6_Y_COUNT,val)
+#define bfin_read_DMA1_6_X_MODIFY()          bfin_read16(DMA1_6_X_MODIFY)
+#define bfin_write_DMA1_6_X_MODIFY(val)      bfin_write16(DMA1_6_X_MODIFY,val)
+#define bfin_read_DMA1_6_Y_MODIFY()          bfin_read16(DMA1_6_Y_MODIFY)
+#define bfin_write_DMA1_6_Y_MODIFY(val)      bfin_write16(DMA1_6_Y_MODIFY,val)
+#define bfin_read_DMA1_6_CURR_DESC_PTR()     bfin_read32(DMA1_6_CURR_DESC_PTR)
+#define bfin_write_DMA1_6_CURR_DESC_PTR(val) bfin_write32(DMA1_6_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_6_CURR_ADDR()         bfin_read32(DMA1_6_CURR_ADDR)
+#define bfin_write_DMA1_6_CURR_ADDR(val)     bfin_write32(DMA1_6_CURR_ADDR,val)
+#define bfin_read_DMA1_6_CURR_X_COUNT()      bfin_read16(DMA1_6_CURR_X_COUNT)
+#define bfin_write_DMA1_6_CURR_X_COUNT(val)  bfin_write16(DMA1_6_CURR_X_COUNT,val)
+#define bfin_read_DMA1_6_CURR_Y_COUNT()      bfin_read16(DMA1_6_CURR_Y_COUNT)
+#define bfin_write_DMA1_6_CURR_Y_COUNT(val)  bfin_write16(DMA1_6_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_6_IRQ_STATUS()        bfin_read16(DMA1_6_IRQ_STATUS)
+#define bfin_write_DMA1_6_IRQ_STATUS(val)    bfin_write16(DMA1_6_IRQ_STATUS,val)
+#define bfin_read_DMA1_6_PERIPHERAL_MAP()    bfin_read16(DMA1_6_PERIPHERAL_MAP)
+#define bfin_write_DMA1_6_PERIPHERAL_MAP(val) bfin_write16(DMA1_6_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_7_CONFIG()            bfin_read16(DMA1_7_CONFIG)
+#define bfin_write_DMA1_7_CONFIG(val)        bfin_write16(DMA1_7_CONFIG,val)
+#define bfin_read_DMA1_7_NEXT_DESC_PTR()     bfin_read32(DMA1_7_NEXT_DESC_PTR)
+#define bfin_write_DMA1_7_NEXT_DESC_PTR(val) bfin_write32(DMA1_7_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_7_START_ADDR()        bfin_read32(DMA1_7_START_ADDR)
+#define bfin_write_DMA1_7_START_ADDR(val)    bfin_write32(DMA1_7_START_ADDR,val)
+#define bfin_read_DMA1_7_X_COUNT()           bfin_read16(DMA1_7_X_COUNT)
+#define bfin_write_DMA1_7_X_COUNT(val)       bfin_write16(DMA1_7_X_COUNT,val)
+#define bfin_read_DMA1_7_Y_COUNT()           bfin_read16(DMA1_7_Y_COUNT)
+#define bfin_write_DMA1_7_Y_COUNT(val)       bfin_write16(DMA1_7_Y_COUNT,val)
+#define bfin_read_DMA1_7_X_MODIFY()          bfin_read16(DMA1_7_X_MODIFY)
+#define bfin_write_DMA1_7_X_MODIFY(val)      bfin_write16(DMA1_7_X_MODIFY,val)
+#define bfin_read_DMA1_7_Y_MODIFY()          bfin_read16(DMA1_7_Y_MODIFY)
+#define bfin_write_DMA1_7_Y_MODIFY(val)      bfin_write16(DMA1_7_Y_MODIFY,val)
+#define bfin_read_DMA1_7_CURR_DESC_PTR()     bfin_read32(DMA1_7_CURR_DESC_PTR)
+#define bfin_write_DMA1_7_CURR_DESC_PTR(val) bfin_write32(DMA1_7_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_7_CURR_ADDR()         bfin_read32(DMA1_7_CURR_ADDR)
+#define bfin_write_DMA1_7_CURR_ADDR(val)     bfin_write32(DMA1_7_CURR_ADDR,val)
+#define bfin_read_DMA1_7_CURR_X_COUNT()      bfin_read16(DMA1_7_CURR_X_COUNT)
+#define bfin_write_DMA1_7_CURR_X_COUNT(val)  bfin_write16(DMA1_7_CURR_X_COUNT,val)
+#define bfin_read_DMA1_7_CURR_Y_COUNT()      bfin_read16(DMA1_7_CURR_Y_COUNT)
+#define bfin_write_DMA1_7_CURR_Y_COUNT(val)  bfin_write16(DMA1_7_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_7_IRQ_STATUS()        bfin_read16(DMA1_7_IRQ_STATUS)
+#define bfin_write_DMA1_7_IRQ_STATUS(val)    bfin_write16(DMA1_7_IRQ_STATUS,val)
+#define bfin_read_DMA1_7_PERIPHERAL_MAP()    bfin_read16(DMA1_7_PERIPHERAL_MAP)
+#define bfin_write_DMA1_7_PERIPHERAL_MAP(val) bfin_write16(DMA1_7_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_8_CONFIG()            bfin_read16(DMA1_8_CONFIG)
+#define bfin_write_DMA1_8_CONFIG(val)        bfin_write16(DMA1_8_CONFIG,val)
+#define bfin_read_DMA1_8_NEXT_DESC_PTR()     bfin_read32(DMA1_8_NEXT_DESC_PTR)
+#define bfin_write_DMA1_8_NEXT_DESC_PTR(val) bfin_write32(DMA1_8_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_8_START_ADDR()        bfin_read32(DMA1_8_START_ADDR)
+#define bfin_write_DMA1_8_START_ADDR(val)    bfin_write32(DMA1_8_START_ADDR,val)
+#define bfin_read_DMA1_8_X_COUNT()           bfin_read16(DMA1_8_X_COUNT)
+#define bfin_write_DMA1_8_X_COUNT(val)       bfin_write16(DMA1_8_X_COUNT,val)
+#define bfin_read_DMA1_8_Y_COUNT()           bfin_read16(DMA1_8_Y_COUNT)
+#define bfin_write_DMA1_8_Y_COUNT(val)       bfin_write16(DMA1_8_Y_COUNT,val)
+#define bfin_read_DMA1_8_X_MODIFY()          bfin_read16(DMA1_8_X_MODIFY)
+#define bfin_write_DMA1_8_X_MODIFY(val)      bfin_write16(DMA1_8_X_MODIFY,val)
+#define bfin_read_DMA1_8_Y_MODIFY()          bfin_read16(DMA1_8_Y_MODIFY)
+#define bfin_write_DMA1_8_Y_MODIFY(val)      bfin_write16(DMA1_8_Y_MODIFY,val)
+#define bfin_read_DMA1_8_CURR_DESC_PTR()     bfin_read32(DMA1_8_CURR_DESC_PTR)
+#define bfin_write_DMA1_8_CURR_DESC_PTR(val) bfin_write32(DMA1_8_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_8_CURR_ADDR()         bfin_read32(DMA1_8_CURR_ADDR)
+#define bfin_write_DMA1_8_CURR_ADDR(val)     bfin_write32(DMA1_8_CURR_ADDR,val)
+#define bfin_read_DMA1_8_CURR_X_COUNT()      bfin_read16(DMA1_8_CURR_X_COUNT)
+#define bfin_write_DMA1_8_CURR_X_COUNT(val)  bfin_write16(DMA1_8_CURR_X_COUNT,val)
+#define bfin_read_DMA1_8_CURR_Y_COUNT()      bfin_read16(DMA1_8_CURR_Y_COUNT)
+#define bfin_write_DMA1_8_CURR_Y_COUNT(val)  bfin_write16(DMA1_8_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_8_IRQ_STATUS()        bfin_read16(DMA1_8_IRQ_STATUS)
+#define bfin_write_DMA1_8_IRQ_STATUS(val)    bfin_write16(DMA1_8_IRQ_STATUS,val)
+#define bfin_read_DMA1_8_PERIPHERAL_MAP()    bfin_read16(DMA1_8_PERIPHERAL_MAP)
+#define bfin_write_DMA1_8_PERIPHERAL_MAP(val) bfin_write16(DMA1_8_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_9_CONFIG()            bfin_read16(DMA1_9_CONFIG)
+#define bfin_write_DMA1_9_CONFIG(val)        bfin_write16(DMA1_9_CONFIG,val)
+#define bfin_read_DMA1_9_NEXT_DESC_PTR()     bfin_read32(DMA1_9_NEXT_DESC_PTR)
+#define bfin_write_DMA1_9_NEXT_DESC_PTR(val) bfin_write32(DMA1_9_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_9_START_ADDR()        bfin_read32(DMA1_9_START_ADDR)
+#define bfin_write_DMA1_9_START_ADDR(val)    bfin_write32(DMA1_9_START_ADDR,val)
+#define bfin_read_DMA1_9_X_COUNT()           bfin_read16(DMA1_9_X_COUNT)
+#define bfin_write_DMA1_9_X_COUNT(val)       bfin_write16(DMA1_9_X_COUNT,val)
+#define bfin_read_DMA1_9_Y_COUNT()           bfin_read16(DMA1_9_Y_COUNT)
+#define bfin_write_DMA1_9_Y_COUNT(val)       bfin_write16(DMA1_9_Y_COUNT,val)
+#define bfin_read_DMA1_9_X_MODIFY()          bfin_read16(DMA1_9_X_MODIFY)
+#define bfin_write_DMA1_9_X_MODIFY(val)      bfin_write16(DMA1_9_X_MODIFY,val)
+#define bfin_read_DMA1_9_Y_MODIFY()          bfin_read16(DMA1_9_Y_MODIFY)
+#define bfin_write_DMA1_9_Y_MODIFY(val)      bfin_write16(DMA1_9_Y_MODIFY,val)
+#define bfin_read_DMA1_9_CURR_DESC_PTR()     bfin_read32(DMA1_9_CURR_DESC_PTR)
+#define bfin_write_DMA1_9_CURR_DESC_PTR(val) bfin_write32(DMA1_9_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_9_CURR_ADDR()         bfin_read32(DMA1_9_CURR_ADDR)
+#define bfin_write_DMA1_9_CURR_ADDR(val)     bfin_write32(DMA1_9_CURR_ADDR,val)
+#define bfin_read_DMA1_9_CURR_X_COUNT()      bfin_read16(DMA1_9_CURR_X_COUNT)
+#define bfin_write_DMA1_9_CURR_X_COUNT(val)  bfin_write16(DMA1_9_CURR_X_COUNT,val)
+#define bfin_read_DMA1_9_CURR_Y_COUNT()      bfin_read16(DMA1_9_CURR_Y_COUNT)
+#define bfin_write_DMA1_9_CURR_Y_COUNT(val)  bfin_write16(DMA1_9_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_9_IRQ_STATUS()        bfin_read16(DMA1_9_IRQ_STATUS)
+#define bfin_write_DMA1_9_IRQ_STATUS(val)    bfin_write16(DMA1_9_IRQ_STATUS,val)
+#define bfin_read_DMA1_9_PERIPHERAL_MAP()    bfin_read16(DMA1_9_PERIPHERAL_MAP)
+#define bfin_write_DMA1_9_PERIPHERAL_MAP(val) bfin_write16(DMA1_9_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_10_CONFIG()           bfin_read16(DMA1_10_CONFIG)
+#define bfin_write_DMA1_10_CONFIG(val)       bfin_write16(DMA1_10_CONFIG,val)
+#define bfin_read_DMA1_10_NEXT_DESC_PTR()    bfin_read32(DMA1_10_NEXT_DESC_PTR)
+#define bfin_write_DMA1_10_NEXT_DESC_PTR(val) bfin_write32(DMA1_10_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_10_START_ADDR()       bfin_read32(DMA1_10_START_ADDR)
+#define bfin_write_DMA1_10_START_ADDR(val)   bfin_write32(DMA1_10_START_ADDR,val)
+#define bfin_read_DMA1_10_X_COUNT()          bfin_read16(DMA1_10_X_COUNT)
+#define bfin_write_DMA1_10_X_COUNT(val)      bfin_write16(DMA1_10_X_COUNT,val)
+#define bfin_read_DMA1_10_Y_COUNT()          bfin_read16(DMA1_10_Y_COUNT)
+#define bfin_write_DMA1_10_Y_COUNT(val)      bfin_write16(DMA1_10_Y_COUNT,val)
+#define bfin_read_DMA1_10_X_MODIFY()         bfin_read16(DMA1_10_X_MODIFY)
+#define bfin_write_DMA1_10_X_MODIFY(val)     bfin_write16(DMA1_10_X_MODIFY,val)
+#define bfin_read_DMA1_10_Y_MODIFY()         bfin_read16(DMA1_10_Y_MODIFY)
+#define bfin_write_DMA1_10_Y_MODIFY(val)     bfin_write16(DMA1_10_Y_MODIFY,val)
+#define bfin_read_DMA1_10_CURR_DESC_PTR()    bfin_read32(DMA1_10_CURR_DESC_PTR)
+#define bfin_write_DMA1_10_CURR_DESC_PTR(val) bfin_write32(DMA1_10_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_10_CURR_ADDR()        bfin_read32(DMA1_10_CURR_ADDR)
+#define bfin_write_DMA1_10_CURR_ADDR(val)    bfin_write32(DMA1_10_CURR_ADDR,val)
+#define bfin_read_DMA1_10_CURR_X_COUNT()     bfin_read16(DMA1_10_CURR_X_COUNT)
+#define bfin_write_DMA1_10_CURR_X_COUNT(val) bfin_write16(DMA1_10_CURR_X_COUNT,val)
+#define bfin_read_DMA1_10_CURR_Y_COUNT()     bfin_read16(DMA1_10_CURR_Y_COUNT)
+#define bfin_write_DMA1_10_CURR_Y_COUNT(val) bfin_write16(DMA1_10_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_10_IRQ_STATUS()       bfin_read16(DMA1_10_IRQ_STATUS)
+#define bfin_write_DMA1_10_IRQ_STATUS(val)   bfin_write16(DMA1_10_IRQ_STATUS,val)
+#define bfin_read_DMA1_10_PERIPHERAL_MAP()   bfin_read16(DMA1_10_PERIPHERAL_MAP)
+#define bfin_write_DMA1_10_PERIPHERAL_MAP(val) bfin_write16(DMA1_10_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_11_CONFIG()           bfin_read16(DMA1_11_CONFIG)
+#define bfin_write_DMA1_11_CONFIG(val)       bfin_write16(DMA1_11_CONFIG,val)
+#define bfin_read_DMA1_11_NEXT_DESC_PTR()    bfin_read32(DMA1_11_NEXT_DESC_PTR)
+#define bfin_write_DMA1_11_NEXT_DESC_PTR(val) bfin_write32(DMA1_11_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_11_START_ADDR()       bfin_read32(DMA1_11_START_ADDR)
+#define bfin_write_DMA1_11_START_ADDR(val)   bfin_write32(DMA1_11_START_ADDR,val)
+#define bfin_read_DMA1_11_X_COUNT()          bfin_read16(DMA1_11_X_COUNT)
+#define bfin_write_DMA1_11_X_COUNT(val)      bfin_write16(DMA1_11_X_COUNT,val)
+#define bfin_read_DMA1_11_Y_COUNT()          bfin_read16(DMA1_11_Y_COUNT)
+#define bfin_write_DMA1_11_Y_COUNT(val)      bfin_write16(DMA1_11_Y_COUNT,val)
+#define bfin_read_DMA1_11_X_MODIFY()         bfin_read16(DMA1_11_X_MODIFY)
+#define bfin_write_DMA1_11_X_MODIFY(val)     bfin_write16(DMA1_11_X_MODIFY,val)
+#define bfin_read_DMA1_11_Y_MODIFY()         bfin_read16(DMA1_11_Y_MODIFY)
+#define bfin_write_DMA1_11_Y_MODIFY(val)     bfin_write16(DMA1_11_Y_MODIFY,val)
+#define bfin_read_DMA1_11_CURR_DESC_PTR()    bfin_read32(DMA1_11_CURR_DESC_PTR)
+#define bfin_write_DMA1_11_CURR_DESC_PTR(val) bfin_write32(DMA1_11_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_11_CURR_ADDR()        bfin_read32(DMA1_11_CURR_ADDR)
+#define bfin_write_DMA1_11_CURR_ADDR(val)    bfin_write32(DMA1_11_CURR_ADDR,val)
+#define bfin_read_DMA1_11_CURR_X_COUNT()     bfin_read16(DMA1_11_CURR_X_COUNT)
+#define bfin_write_DMA1_11_CURR_X_COUNT(val) bfin_write16(DMA1_11_CURR_X_COUNT,val)
+#define bfin_read_DMA1_11_CURR_Y_COUNT()     bfin_read16(DMA1_11_CURR_Y_COUNT)
+#define bfin_write_DMA1_11_CURR_Y_COUNT(val) bfin_write16(DMA1_11_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_11_IRQ_STATUS()       bfin_read16(DMA1_11_IRQ_STATUS)
+#define bfin_write_DMA1_11_IRQ_STATUS(val)   bfin_write16(DMA1_11_IRQ_STATUS,val)
+#define bfin_read_DMA1_11_PERIPHERAL_MAP()   bfin_read16(DMA1_11_PERIPHERAL_MAP)
+#define bfin_write_DMA1_11_PERIPHERAL_MAP(val) bfin_write16(DMA1_11_PERIPHERAL_MAP,val)
+/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */
+#define bfin_read_MDMA_D2_CONFIG()          bfin_read16(MDMA_D2_CONFIG)
+#define bfin_write_MDMA_D2_CONFIG(val)      bfin_write16(MDMA_D2_CONFIG,val)
+#define bfin_read_MDMA_D2_NEXT_DESC_PTR()   bfin_read32(MDMA_D2_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D2_NEXT_DESC_PTR(val) bfin_write32(MDMA_D2_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D2_START_ADDR()      bfin_read32(MDMA_D2_START_ADDR)
+#define bfin_write_MDMA_D2_START_ADDR(val)  bfin_write32(MDMA_D2_START_ADDR,val)
+#define bfin_read_MDMA_D2_X_COUNT()         bfin_read16(MDMA_D2_X_COUNT)
+#define bfin_write_MDMA_D2_X_COUNT(val)     bfin_write16(MDMA_D2_X_COUNT,val)
+#define bfin_read_MDMA_D2_Y_COUNT()         bfin_read16(MDMA_D2_Y_COUNT)
+#define bfin_write_MDMA_D2_Y_COUNT(val)     bfin_write16(MDMA_D2_Y_COUNT,val)
+#define bfin_read_MDMA_D2_X_MODIFY()        bfin_read16(MDMA_D2_X_MODIFY)
+#define bfin_write_MDMA_D2_X_MODIFY(val)    bfin_write16(MDMA_D2_X_MODIFY,val)
+#define bfin_read_MDMA_D2_Y_MODIFY()        bfin_read16(MDMA_D2_Y_MODIFY)
+#define bfin_write_MDMA_D2_Y_MODIFY(val)    bfin_write16(MDMA_D2_Y_MODIFY,val)
+#define bfin_read_MDMA_D2_CURR_DESC_PTR()   bfin_read32(MDMA_D2_CURR_DESC_PTR)
+#define bfin_write_MDMA_D2_CURR_DESC_PTR(val) bfin_write32(MDMA_D2_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D2_CURR_ADDR()       bfin_read32(MDMA_D2_CURR_ADDR)
+#define bfin_write_MDMA_D2_CURR_ADDR(val)   bfin_write32(MDMA_D2_CURR_ADDR,val)
+#define bfin_read_MDMA_D2_CURR_X_COUNT()    bfin_read16(MDMA_D2_CURR_X_COUNT)
+#define bfin_write_MDMA_D2_CURR_X_COUNT(val) bfin_write16(MDMA_D2_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D2_CURR_Y_COUNT()    bfin_read16(MDMA_D2_CURR_Y_COUNT)
+#define bfin_write_MDMA_D2_CURR_Y_COUNT(val) bfin_write16(MDMA_D2_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D2_IRQ_STATUS()      bfin_read16(MDMA_D2_IRQ_STATUS)
+#define bfin_write_MDMA_D2_IRQ_STATUS(val)  bfin_write16(MDMA_D2_IRQ_STATUS,val)
+#define bfin_read_MDMA_D2_PERIPHERAL_MAP()  bfin_read16(MDMA_D2_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D2_PERIPHERAL_MAP(val) bfin_write16(MDMA_D2_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA_S2_CONFIG()          bfin_read16(MDMA_S2_CONFIG)
+#define bfin_write_MDMA_S2_CONFIG(val)      bfin_write16(MDMA_S2_CONFIG,val)
+#define bfin_read_MDMA_S2_NEXT_DESC_PTR()   bfin_read32(MDMA_S2_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S2_NEXT_DESC_PTR(val) bfin_write32(MDMA_S2_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S2_START_ADDR()      bfin_read32(MDMA_S2_START_ADDR)
+#define bfin_write_MDMA_S2_START_ADDR(val)  bfin_write32(MDMA_S2_START_ADDR,val)
+#define bfin_read_MDMA_S2_X_COUNT()         bfin_read16(MDMA_S2_X_COUNT)
+#define bfin_write_MDMA_S2_X_COUNT(val)     bfin_write16(MDMA_S2_X_COUNT,val)
+#define bfin_read_MDMA_S2_Y_COUNT()         bfin_read16(MDMA_S2_Y_COUNT)
+#define bfin_write_MDMA_S2_Y_COUNT(val)     bfin_write16(MDMA_S2_Y_COUNT,val)
+#define bfin_read_MDMA_S2_X_MODIFY()        bfin_read16(MDMA_S2_X_MODIFY)
+#define bfin_write_MDMA_S2_X_MODIFY(val)    bfin_write16(MDMA_S2_X_MODIFY,val)
+#define bfin_read_MDMA_S2_Y_MODIFY()        bfin_read16(MDMA_S2_Y_MODIFY)
+#define bfin_write_MDMA_S2_Y_MODIFY(val)    bfin_write16(MDMA_S2_Y_MODIFY,val)
+#define bfin_read_MDMA_S2_CURR_DESC_PTR()   bfin_read32(MDMA_S2_CURR_DESC_PTR)
+#define bfin_write_MDMA_S2_CURR_DESC_PTR(val) bfin_write32(MDMA_S2_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S2_CURR_ADDR()       bfin_read32(MDMA_S2_CURR_ADDR)
+#define bfin_write_MDMA_S2_CURR_ADDR(val)   bfin_write32(MDMA_S2_CURR_ADDR,val)
+#define bfin_read_MDMA_S2_CURR_X_COUNT()    bfin_read16(MDMA_S2_CURR_X_COUNT)
+#define bfin_write_MDMA_S2_CURR_X_COUNT(val) bfin_write16(MDMA_S2_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S2_CURR_Y_COUNT()    bfin_read16(MDMA_S2_CURR_Y_COUNT)
+#define bfin_write_MDMA_S2_CURR_Y_COUNT(val) bfin_write16(MDMA_S2_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S2_IRQ_STATUS()      bfin_read16(MDMA_S2_IRQ_STATUS)
+#define bfin_write_MDMA_S2_IRQ_STATUS(val)  bfin_write16(MDMA_S2_IRQ_STATUS,val)
+#define bfin_read_MDMA_S2_PERIPHERAL_MAP()  bfin_read16(MDMA_S2_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S2_PERIPHERAL_MAP(val) bfin_write16(MDMA_S2_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA_D3_CONFIG()          bfin_read16(MDMA_D3_CONFIG)
+#define bfin_write_MDMA_D3_CONFIG(val)      bfin_write16(MDMA_D3_CONFIG,val)
+#define bfin_read_MDMA_D3_NEXT_DESC_PTR()   bfin_read32(MDMA_D3_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D3_NEXT_DESC_PTR(val) bfin_write32(MDMA_D3_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D3_START_ADDR()      bfin_read32(MDMA_D3_START_ADDR)
+#define bfin_write_MDMA_D3_START_ADDR(val)  bfin_write32(MDMA_D3_START_ADDR,val)
+#define bfin_read_MDMA_D3_X_COUNT()         bfin_read16(MDMA_D3_X_COUNT)
+#define bfin_write_MDMA_D3_X_COUNT(val)     bfin_write16(MDMA_D3_X_COUNT,val)
+#define bfin_read_MDMA_D3_Y_COUNT()         bfin_read16(MDMA_D3_Y_COUNT)
+#define bfin_write_MDMA_D3_Y_COUNT(val)     bfin_write16(MDMA_D3_Y_COUNT,val)
+#define bfin_read_MDMA_D3_X_MODIFY()        bfin_read16(MDMA_D3_X_MODIFY)
+#define bfin_write_MDMA_D3_X_MODIFY(val)    bfin_write16(MDMA_D3_X_MODIFY,val)
+#define bfin_read_MDMA_D3_Y_MODIFY()        bfin_read16(MDMA_D3_Y_MODIFY)
+#define bfin_write_MDMA_D3_Y_MODIFY(val)    bfin_write16(MDMA_D3_Y_MODIFY,val)
+#define bfin_read_MDMA_D3_CURR_DESC_PTR()   bfin_read32(MDMA_D3_CURR_DESC_PTR)
+#define bfin_write_MDMA_D3_CURR_DESC_PTR(val) bfin_write32(MDMA_D3_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D3_CURR_ADDR()       bfin_read32(MDMA_D3_CURR_ADDR)
+#define bfin_write_MDMA_D3_CURR_ADDR(val)   bfin_write32(MDMA_D3_CURR_ADDR,val)
+#define bfin_read_MDMA_D3_CURR_X_COUNT()    bfin_read16(MDMA_D3_CURR_X_COUNT)
+#define bfin_write_MDMA_D3_CURR_X_COUNT(val) bfin_write16(MDMA_D3_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D3_CURR_Y_COUNT()    bfin_read16(MDMA_D3_CURR_Y_COUNT)
+#define bfin_write_MDMA_D3_CURR_Y_COUNT(val) bfin_write16(MDMA_D3_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D3_IRQ_STATUS()      bfin_read16(MDMA_D3_IRQ_STATUS)
+#define bfin_write_MDMA_D3_IRQ_STATUS(val)  bfin_write16(MDMA_D3_IRQ_STATUS,val)
+#define bfin_read_MDMA_D3_PERIPHERAL_MAP()  bfin_read16(MDMA_D3_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D3_PERIPHERAL_MAP(val) bfin_write16(MDMA_D3_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA_S3_CONFIG()          bfin_read16(MDMA_S3_CONFIG)
+#define bfin_write_MDMA_S3_CONFIG(val)      bfin_write16(MDMA_S3_CONFIG,val)
+#define bfin_read_MDMA_S3_NEXT_DESC_PTR()   bfin_read32(MDMA_S3_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S3_NEXT_DESC_PTR(val) bfin_write32(MDMA_S3_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S3_START_ADDR()      bfin_read32(MDMA_S3_START_ADDR)
+#define bfin_write_MDMA_S3_START_ADDR(val)  bfin_write32(MDMA_S3_START_ADDR,val)
+#define bfin_read_MDMA_S3_X_COUNT()         bfin_read16(MDMA_S3_X_COUNT)
+#define bfin_write_MDMA_S3_X_COUNT(val)     bfin_write16(MDMA_S3_X_COUNT,val)
+#define bfin_read_MDMA_S3_Y_COUNT()         bfin_read16(MDMA_S3_Y_COUNT)
+#define bfin_write_MDMA_S3_Y_COUNT(val)     bfin_write16(MDMA_S3_Y_COUNT,val)
+#define bfin_read_MDMA_S3_X_MODIFY()        bfin_read16(MDMA_S3_X_MODIFY)
+#define bfin_write_MDMA_S3_X_MODIFY(val)    bfin_write16(MDMA_S3_X_MODIFY,val)
+#define bfin_read_MDMA_S3_Y_MODIFY()        bfin_read16(MDMA_S3_Y_MODIFY)
+#define bfin_write_MDMA_S3_Y_MODIFY(val)    bfin_write16(MDMA_S3_Y_MODIFY,val)
+#define bfin_read_MDMA_S3_CURR_DESC_PTR()   bfin_read32(MDMA_S3_CURR_DESC_PTR)
+#define bfin_write_MDMA_S3_CURR_DESC_PTR(val) bfin_write32(MDMA_S3_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S3_CURR_ADDR()       bfin_read32(MDMA_S3_CURR_ADDR)
+#define bfin_write_MDMA_S3_CURR_ADDR(val)   bfin_write32(MDMA_S3_CURR_ADDR,val)
+#define bfin_read_MDMA_S3_CURR_X_COUNT()    bfin_read16(MDMA_S3_CURR_X_COUNT)
+#define bfin_write_MDMA_S3_CURR_X_COUNT(val) bfin_write16(MDMA_S3_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S3_CURR_Y_COUNT()    bfin_read16(MDMA_S3_CURR_Y_COUNT)
+#define bfin_write_MDMA_S3_CURR_Y_COUNT(val) bfin_write16(MDMA_S3_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S3_IRQ_STATUS()      bfin_read16(MDMA_S3_IRQ_STATUS)
+#define bfin_write_MDMA_S3_IRQ_STATUS(val)  bfin_write16(MDMA_S3_IRQ_STATUS,val)
+#define bfin_read_MDMA_S3_PERIPHERAL_MAP()  bfin_read16(MDMA_S3_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S3_PERIPHERAL_MAP(val) bfin_write16(MDMA_S3_PERIPHERAL_MAP,val)
+/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */
+#define bfin_read_DMA2_0_CONFIG()            bfin_read16(DMA2_0_CONFIG)
+#define bfin_write_DMA2_0_CONFIG(val)        bfin_write16(DMA2_0_CONFIG,val)
+#define bfin_read_DMA2_0_NEXT_DESC_PTR()     bfin_read32(DMA2_0_NEXT_DESC_PTR)
+#define bfin_write_DMA2_0_NEXT_DESC_PTR(val) bfin_write32(DMA2_0_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_0_START_ADDR()        bfin_read32(DMA2_0_START_ADDR)
+#define bfin_write_DMA2_0_START_ADDR(val)    bfin_write32(DMA2_0_START_ADDR,val)
+#define bfin_read_DMA2_0_X_COUNT()           bfin_read16(DMA2_0_X_COUNT)
+#define bfin_write_DMA2_0_X_COUNT(val)       bfin_write16(DMA2_0_X_COUNT,val)
+#define bfin_read_DMA2_0_Y_COUNT()           bfin_read16(DMA2_0_Y_COUNT)
+#define bfin_write_DMA2_0_Y_COUNT(val)       bfin_write16(DMA2_0_Y_COUNT,val)
+#define bfin_read_DMA2_0_X_MODIFY()          bfin_read16(DMA2_0_X_MODIFY)
+#define bfin_write_DMA2_0_X_MODIFY(val)      bfin_write16(DMA2_0_X_MODIFY,val)
+#define bfin_read_DMA2_0_Y_MODIFY()          bfin_read16(DMA2_0_Y_MODIFY)
+#define bfin_write_DMA2_0_Y_MODIFY(val)      bfin_write16(DMA2_0_Y_MODIFY,val)
+#define bfin_read_DMA2_0_CURR_DESC_PTR()     bfin_read32(DMA2_0_CURR_DESC_PTR)
+#define bfin_write_DMA2_0_CURR_DESC_PTR(val) bfin_write32(DMA2_0_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_0_CURR_ADDR()         bfin_read32(DMA2_0_CURR_ADDR)
+#define bfin_write_DMA2_0_CURR_ADDR(val)     bfin_write32(DMA2_0_CURR_ADDR,val)
+#define bfin_read_DMA2_0_CURR_X_COUNT()      bfin_read16(DMA2_0_CURR_X_COUNT)
+#define bfin_write_DMA2_0_CURR_X_COUNT(val)  bfin_write16(DMA2_0_CURR_X_COUNT,val)
+#define bfin_read_DMA2_0_CURR_Y_COUNT()      bfin_read16(DMA2_0_CURR_Y_COUNT)
+#define bfin_write_DMA2_0_CURR_Y_COUNT(val)  bfin_write16(DMA2_0_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_0_IRQ_STATUS()        bfin_read16(DMA2_0_IRQ_STATUS)
+#define bfin_write_DMA2_0_IRQ_STATUS(val)    bfin_write16(DMA2_0_IRQ_STATUS,val)
+#define bfin_read_DMA2_0_PERIPHERAL_MAP()    bfin_read16(DMA2_0_PERIPHERAL_MAP)
+#define bfin_write_DMA2_0_PERIPHERAL_MAP(val) bfin_write16(DMA2_0_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_1_CONFIG()            bfin_read16(DMA2_1_CONFIG)
+#define bfin_write_DMA2_1_CONFIG(val)        bfin_write16(DMA2_1_CONFIG,val)
+#define bfin_read_DMA2_1_NEXT_DESC_PTR()     bfin_read32(DMA2_1_NEXT_DESC_PTR)
+#define bfin_write_DMA2_1_NEXT_DESC_PTR(val) bfin_write32(DMA2_1_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_1_START_ADDR()        bfin_read32(DMA2_1_START_ADDR)
+#define bfin_write_DMA2_1_START_ADDR(val)    bfin_write32(DMA2_1_START_ADDR,val)
+#define bfin_read_DMA2_1_X_COUNT()           bfin_read16(DMA2_1_X_COUNT)
+#define bfin_write_DMA2_1_X_COUNT(val)       bfin_write16(DMA2_1_X_COUNT,val)
+#define bfin_read_DMA2_1_Y_COUNT()           bfin_read16(DMA2_1_Y_COUNT)
+#define bfin_write_DMA2_1_Y_COUNT(val)       bfin_write16(DMA2_1_Y_COUNT,val)
+#define bfin_read_DMA2_1_X_MODIFY()          bfin_read16(DMA2_1_X_MODIFY)
+#define bfin_write_DMA2_1_X_MODIFY(val)      bfin_write16(DMA2_1_X_MODIFY,val)
+#define bfin_read_DMA2_1_Y_MODIFY()          bfin_read16(DMA2_1_Y_MODIFY)
+#define bfin_write_DMA2_1_Y_MODIFY(val)      bfin_write16(DMA2_1_Y_MODIFY,val)
+#define bfin_read_DMA2_1_CURR_DESC_PTR()     bfin_read32(DMA2_1_CURR_DESC_PTR)
+#define bfin_write_DMA2_1_CURR_DESC_PTR(val) bfin_write32(DMA2_1_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_1_CURR_ADDR()         bfin_read32(DMA2_1_CURR_ADDR)
+#define bfin_write_DMA2_1_CURR_ADDR(val)     bfin_write32(DMA2_1_CURR_ADDR,val)
+#define bfin_read_DMA2_1_CURR_X_COUNT()      bfin_read16(DMA2_1_CURR_X_COUNT)
+#define bfin_write_DMA2_1_CURR_X_COUNT(val)  bfin_write16(DMA2_1_CURR_X_COUNT,val)
+#define bfin_read_DMA2_1_CURR_Y_COUNT()      bfin_read16(DMA2_1_CURR_Y_COUNT)
+#define bfin_write_DMA2_1_CURR_Y_COUNT(val)  bfin_write16(DMA2_1_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_1_IRQ_STATUS()        bfin_read16(DMA2_1_IRQ_STATUS)
+#define bfin_write_DMA2_1_IRQ_STATUS(val)    bfin_write16(DMA2_1_IRQ_STATUS,val)
+#define bfin_read_DMA2_1_PERIPHERAL_MAP()    bfin_read16(DMA2_1_PERIPHERAL_MAP)
+#define bfin_write_DMA2_1_PERIPHERAL_MAP(val) bfin_write16(DMA2_1_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_2_CONFIG()            bfin_read16(DMA2_2_CONFIG)
+#define bfin_write_DMA2_2_CONFIG(val)        bfin_write16(DMA2_2_CONFIG,val)
+#define bfin_read_DMA2_2_NEXT_DESC_PTR()     bfin_read32(DMA2_2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_2_NEXT_DESC_PTR(val) bfin_write32(DMA2_2_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_2_START_ADDR()        bfin_read32(DMA2_2_START_ADDR)
+#define bfin_write_DMA2_2_START_ADDR(val)    bfin_write32(DMA2_2_START_ADDR,val)
+#define bfin_read_DMA2_2_X_COUNT()           bfin_read16(DMA2_2_X_COUNT)
+#define bfin_write_DMA2_2_X_COUNT(val)       bfin_write16(DMA2_2_X_COUNT,val)
+#define bfin_read_DMA2_2_Y_COUNT()           bfin_read16(DMA2_2_Y_COUNT)
+#define bfin_write_DMA2_2_Y_COUNT(val)       bfin_write16(DMA2_2_Y_COUNT,val)
+#define bfin_read_DMA2_2_X_MODIFY()          bfin_read16(DMA2_2_X_MODIFY)
+#define bfin_write_DMA2_2_X_MODIFY(val)      bfin_write16(DMA2_2_X_MODIFY,val)
+#define bfin_read_DMA2_2_Y_MODIFY()          bfin_read16(DMA2_2_Y_MODIFY)
+#define bfin_write_DMA2_2_Y_MODIFY(val)      bfin_write16(DMA2_2_Y_MODIFY,val)
+#define bfin_read_DMA2_2_CURR_DESC_PTR()     bfin_read32(DMA2_2_CURR_DESC_PTR)
+#define bfin_write_DMA2_2_CURR_DESC_PTR(val) bfin_write32(DMA2_2_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_2_CURR_ADDR()         bfin_read32(DMA2_2_CURR_ADDR)
+#define bfin_write_DMA2_2_CURR_ADDR(val)     bfin_write32(DMA2_2_CURR_ADDR,val)
+#define bfin_read_DMA2_2_CURR_X_COUNT()      bfin_read16(DMA2_2_CURR_X_COUNT)
+#define bfin_write_DMA2_2_CURR_X_COUNT(val)  bfin_write16(DMA2_2_CURR_X_COUNT,val)
+#define bfin_read_DMA2_2_CURR_Y_COUNT()      bfin_read16(DMA2_2_CURR_Y_COUNT)
+#define bfin_write_DMA2_2_CURR_Y_COUNT(val)  bfin_write16(DMA2_2_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_2_IRQ_STATUS()        bfin_read16(DMA2_2_IRQ_STATUS)
+#define bfin_write_DMA2_2_IRQ_STATUS(val)    bfin_write16(DMA2_2_IRQ_STATUS,val)
+#define bfin_read_DMA2_2_PERIPHERAL_MAP()    bfin_read16(DMA2_2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_2_PERIPHERAL_MAP(val) bfin_write16(DMA2_2_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_3_CONFIG()            bfin_read16(DMA2_3_CONFIG)
+#define bfin_write_DMA2_3_CONFIG(val)        bfin_write16(DMA2_3_CONFIG,val)
+#define bfin_read_DMA2_3_NEXT_DESC_PTR()     bfin_read32(DMA2_3_NEXT_DESC_PTR)
+#define bfin_write_DMA2_3_NEXT_DESC_PTR(val) bfin_write32(DMA2_3_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_3_START_ADDR()        bfin_read32(DMA2_3_START_ADDR)
+#define bfin_write_DMA2_3_START_ADDR(val)    bfin_write32(DMA2_3_START_ADDR,val)
+#define bfin_read_DMA2_3_X_COUNT()           bfin_read16(DMA2_3_X_COUNT)
+#define bfin_write_DMA2_3_X_COUNT(val)       bfin_write16(DMA2_3_X_COUNT,val)
+#define bfin_read_DMA2_3_Y_COUNT()           bfin_read16(DMA2_3_Y_COUNT)
+#define bfin_write_DMA2_3_Y_COUNT(val)       bfin_write16(DMA2_3_Y_COUNT,val)
+#define bfin_read_DMA2_3_X_MODIFY()          bfin_read16(DMA2_3_X_MODIFY)
+#define bfin_write_DMA2_3_X_MODIFY(val)      bfin_write16(DMA2_3_X_MODIFY,val)
+#define bfin_read_DMA2_3_Y_MODIFY()          bfin_read16(DMA2_3_Y_MODIFY)
+#define bfin_write_DMA2_3_Y_MODIFY(val)      bfin_write16(DMA2_3_Y_MODIFY,val)
+#define bfin_read_DMA2_3_CURR_DESC_PTR()     bfin_read32(DMA2_3_CURR_DESC_PTR)
+#define bfin_write_DMA2_3_CURR_DESC_PTR(val) bfin_write32(DMA2_3_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_3_CURR_ADDR()         bfin_read32(DMA2_3_CURR_ADDR)
+#define bfin_write_DMA2_3_CURR_ADDR(val)     bfin_write32(DMA2_3_CURR_ADDR,val)
+#define bfin_read_DMA2_3_CURR_X_COUNT()      bfin_read16(DMA2_3_CURR_X_COUNT)
+#define bfin_write_DMA2_3_CURR_X_COUNT(val)  bfin_write16(DMA2_3_CURR_X_COUNT,val)
+#define bfin_read_DMA2_3_CURR_Y_COUNT()      bfin_read16(DMA2_3_CURR_Y_COUNT)
+#define bfin_write_DMA2_3_CURR_Y_COUNT(val)  bfin_write16(DMA2_3_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_3_IRQ_STATUS()        bfin_read16(DMA2_3_IRQ_STATUS)
+#define bfin_write_DMA2_3_IRQ_STATUS(val)    bfin_write16(DMA2_3_IRQ_STATUS,val)
+#define bfin_read_DMA2_3_PERIPHERAL_MAP()    bfin_read16(DMA2_3_PERIPHERAL_MAP)
+#define bfin_write_DMA2_3_PERIPHERAL_MAP(val) bfin_write16(DMA2_3_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_4_CONFIG()            bfin_read16(DMA2_4_CONFIG)
+#define bfin_write_DMA2_4_CONFIG(val)        bfin_write16(DMA2_4_CONFIG,val)
+#define bfin_read_DMA2_4_NEXT_DESC_PTR()     bfin_read32(DMA2_4_NEXT_DESC_PTR)
+#define bfin_write_DMA2_4_NEXT_DESC_PTR(val) bfin_write32(DMA2_4_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_4_START_ADDR()        bfin_read32(DMA2_4_START_ADDR)
+#define bfin_write_DMA2_4_START_ADDR(val)    bfin_write32(DMA2_4_START_ADDR,val)
+#define bfin_read_DMA2_4_X_COUNT()           bfin_read16(DMA2_4_X_COUNT)
+#define bfin_write_DMA2_4_X_COUNT(val)       bfin_write16(DMA2_4_X_COUNT,val)
+#define bfin_read_DMA2_4_Y_COUNT()           bfin_read16(DMA2_4_Y_COUNT)
+#define bfin_write_DMA2_4_Y_COUNT(val)       bfin_write16(DMA2_4_Y_COUNT,val)
+#define bfin_read_DMA2_4_X_MODIFY()          bfin_read16(DMA2_4_X_MODIFY)
+#define bfin_write_DMA2_4_X_MODIFY(val)      bfin_write16(DMA2_4_X_MODIFY,val)
+#define bfin_read_DMA2_4_Y_MODIFY()          bfin_read16(DMA2_4_Y_MODIFY)
+#define bfin_write_DMA2_4_Y_MODIFY(val)      bfin_write16(DMA2_4_Y_MODIFY,val)
+#define bfin_read_DMA2_4_CURR_DESC_PTR()     bfin_read32(DMA2_4_CURR_DESC_PTR)
+#define bfin_write_DMA2_4_CURR_DESC_PTR(val) bfin_write32(DMA2_4_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_4_CURR_ADDR()         bfin_read32(DMA2_4_CURR_ADDR)
+#define bfin_write_DMA2_4_CURR_ADDR(val)     bfin_write32(DMA2_4_CURR_ADDR,val)
+#define bfin_read_DMA2_4_CURR_X_COUNT()      bfin_read16(DMA2_4_CURR_X_COUNT)
+#define bfin_write_DMA2_4_CURR_X_COUNT(val)  bfin_write16(DMA2_4_CURR_X_COUNT,val)
+#define bfin_read_DMA2_4_CURR_Y_COUNT()      bfin_read16(DMA2_4_CURR_Y_COUNT)
+#define bfin_write_DMA2_4_CURR_Y_COUNT(val)  bfin_write16(DMA2_4_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_4_IRQ_STATUS()        bfin_read16(DMA2_4_IRQ_STATUS)
+#define bfin_write_DMA2_4_IRQ_STATUS(val)    bfin_write16(DMA2_4_IRQ_STATUS,val)
+#define bfin_read_DMA2_4_PERIPHERAL_MAP()    bfin_read16(DMA2_4_PERIPHERAL_MAP)
+#define bfin_write_DMA2_4_PERIPHERAL_MAP(val) bfin_write16(DMA2_4_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_5_CONFIG()            bfin_read16(DMA2_5_CONFIG)
+#define bfin_write_DMA2_5_CONFIG(val)        bfin_write16(DMA2_5_CONFIG,val)
+#define bfin_read_DMA2_5_NEXT_DESC_PTR()     bfin_read32(DMA2_5_NEXT_DESC_PTR)
+#define bfin_write_DMA2_5_NEXT_DESC_PTR(val) bfin_write32(DMA2_5_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_5_START_ADDR()        bfin_read32(DMA2_5_START_ADDR)
+#define bfin_write_DMA2_5_START_ADDR(val)    bfin_write32(DMA2_5_START_ADDR,val)
+#define bfin_read_DMA2_5_X_COUNT()           bfin_read16(DMA2_5_X_COUNT)
+#define bfin_write_DMA2_5_X_COUNT(val)       bfin_write16(DMA2_5_X_COUNT,val)
+#define bfin_read_DMA2_5_Y_COUNT()           bfin_read16(DMA2_5_Y_COUNT)
+#define bfin_write_DMA2_5_Y_COUNT(val)       bfin_write16(DMA2_5_Y_COUNT,val)
+#define bfin_read_DMA2_5_X_MODIFY()          bfin_read16(DMA2_5_X_MODIFY)
+#define bfin_write_DMA2_5_X_MODIFY(val)      bfin_write16(DMA2_5_X_MODIFY,val)
+#define bfin_read_DMA2_5_Y_MODIFY()          bfin_read16(DMA2_5_Y_MODIFY)
+#define bfin_write_DMA2_5_Y_MODIFY(val)      bfin_write16(DMA2_5_Y_MODIFY,val)
+#define bfin_read_DMA2_5_CURR_DESC_PTR()     bfin_read32(DMA2_5_CURR_DESC_PTR)
+#define bfin_write_DMA2_5_CURR_DESC_PTR(val) bfin_write32(DMA2_5_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_5_CURR_ADDR()         bfin_read32(DMA2_5_CURR_ADDR)
+#define bfin_write_DMA2_5_CURR_ADDR(val)     bfin_write32(DMA2_5_CURR_ADDR,val)
+#define bfin_read_DMA2_5_CURR_X_COUNT()      bfin_read16(DMA2_5_CURR_X_COUNT)
+#define bfin_write_DMA2_5_CURR_X_COUNT(val)  bfin_write16(DMA2_5_CURR_X_COUNT,val)
+#define bfin_read_DMA2_5_CURR_Y_COUNT()      bfin_read16(DMA2_5_CURR_Y_COUNT)
+#define bfin_write_DMA2_5_CURR_Y_COUNT(val)  bfin_write16(DMA2_5_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_5_IRQ_STATUS()        bfin_read16(DMA2_5_IRQ_STATUS)
+#define bfin_write_DMA2_5_IRQ_STATUS(val)    bfin_write16(DMA2_5_IRQ_STATUS,val)
+#define bfin_read_DMA2_5_PERIPHERAL_MAP()    bfin_read16(DMA2_5_PERIPHERAL_MAP)
+#define bfin_write_DMA2_5_PERIPHERAL_MAP(val) bfin_write16(DMA2_5_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_6_CONFIG()            bfin_read16(DMA2_6_CONFIG)
+#define bfin_write_DMA2_6_CONFIG(val)        bfin_write16(DMA2_6_CONFIG,val)
+#define bfin_read_DMA2_6_NEXT_DESC_PTR()     bfin_read32(DMA2_6_NEXT_DESC_PTR)
+#define bfin_write_DMA2_6_NEXT_DESC_PTR(val) bfin_write32(DMA2_6_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_6_START_ADDR()        bfin_read32(DMA2_6_START_ADDR)
+#define bfin_write_DMA2_6_START_ADDR(val)    bfin_write32(DMA2_6_START_ADDR,val)
+#define bfin_read_DMA2_6_X_COUNT()           bfin_read16(DMA2_6_X_COUNT)
+#define bfin_write_DMA2_6_X_COUNT(val)       bfin_write16(DMA2_6_X_COUNT,val)
+#define bfin_read_DMA2_6_Y_COUNT()           bfin_read16(DMA2_6_Y_COUNT)
+#define bfin_write_DMA2_6_Y_COUNT(val)       bfin_write16(DMA2_6_Y_COUNT,val)
+#define bfin_read_DMA2_6_X_MODIFY()          bfin_read16(DMA2_6_X_MODIFY)
+#define bfin_write_DMA2_6_X_MODIFY(val)      bfin_write16(DMA2_6_X_MODIFY,val)
+#define bfin_read_DMA2_6_Y_MODIFY()          bfin_read16(DMA2_6_Y_MODIFY)
+#define bfin_write_DMA2_6_Y_MODIFY(val)      bfin_write16(DMA2_6_Y_MODIFY,val)
+#define bfin_read_DMA2_6_CURR_DESC_PTR()     bfin_read32(DMA2_6_CURR_DESC_PTR)
+#define bfin_write_DMA2_6_CURR_DESC_PTR(val) bfin_write32(DMA2_6_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_6_CURR_ADDR()         bfin_read32(DMA2_6_CURR_ADDR)
+#define bfin_write_DMA2_6_CURR_ADDR(val)     bfin_write32(DMA2_6_CURR_ADDR,val)
+#define bfin_read_DMA2_6_CURR_X_COUNT()      bfin_read16(DMA2_6_CURR_X_COUNT)
+#define bfin_write_DMA2_6_CURR_X_COUNT(val)  bfin_write16(DMA2_6_CURR_X_COUNT,val)
+#define bfin_read_DMA2_6_CURR_Y_COUNT()      bfin_read16(DMA2_6_CURR_Y_COUNT)
+#define bfin_write_DMA2_6_CURR_Y_COUNT(val)  bfin_write16(DMA2_6_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_6_IRQ_STATUS()        bfin_read16(DMA2_6_IRQ_STATUS)
+#define bfin_write_DMA2_6_IRQ_STATUS(val)    bfin_write16(DMA2_6_IRQ_STATUS,val)
+#define bfin_read_DMA2_6_PERIPHERAL_MAP()    bfin_read16(DMA2_6_PERIPHERAL_MAP)
+#define bfin_write_DMA2_6_PERIPHERAL_MAP(val) bfin_write16(DMA2_6_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_7_CONFIG()            bfin_read16(DMA2_7_CONFIG)
+#define bfin_write_DMA2_7_CONFIG(val)        bfin_write16(DMA2_7_CONFIG,val)
+#define bfin_read_DMA2_7_NEXT_DESC_PTR()     bfin_read32(DMA2_7_NEXT_DESC_PTR)
+#define bfin_write_DMA2_7_NEXT_DESC_PTR(val) bfin_write32(DMA2_7_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_7_START_ADDR()        bfin_read32(DMA2_7_START_ADDR)
+#define bfin_write_DMA2_7_START_ADDR(val)    bfin_write32(DMA2_7_START_ADDR,val)
+#define bfin_read_DMA2_7_X_COUNT()           bfin_read16(DMA2_7_X_COUNT)
+#define bfin_write_DMA2_7_X_COUNT(val)       bfin_write16(DMA2_7_X_COUNT,val)
+#define bfin_read_DMA2_7_Y_COUNT()           bfin_read16(DMA2_7_Y_COUNT)
+#define bfin_write_DMA2_7_Y_COUNT(val)       bfin_write16(DMA2_7_Y_COUNT,val)
+#define bfin_read_DMA2_7_X_MODIFY()          bfin_read16(DMA2_7_X_MODIFY)
+#define bfin_write_DMA2_7_X_MODIFY(val)      bfin_write16(DMA2_7_X_MODIFY,val)
+#define bfin_read_DMA2_7_Y_MODIFY()          bfin_read16(DMA2_7_Y_MODIFY)
+#define bfin_write_DMA2_7_Y_MODIFY(val)      bfin_write16(DMA2_7_Y_MODIFY,val)
+#define bfin_read_DMA2_7_CURR_DESC_PTR()     bfin_read32(DMA2_7_CURR_DESC_PTR)
+#define bfin_write_DMA2_7_CURR_DESC_PTR(val) bfin_write32(DMA2_7_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_7_CURR_ADDR()         bfin_read32(DMA2_7_CURR_ADDR)
+#define bfin_write_DMA2_7_CURR_ADDR(val)     bfin_write32(DMA2_7_CURR_ADDR,val)
+#define bfin_read_DMA2_7_CURR_X_COUNT()      bfin_read16(DMA2_7_CURR_X_COUNT)
+#define bfin_write_DMA2_7_CURR_X_COUNT(val)  bfin_write16(DMA2_7_CURR_X_COUNT,val)
+#define bfin_read_DMA2_7_CURR_Y_COUNT()      bfin_read16(DMA2_7_CURR_Y_COUNT)
+#define bfin_write_DMA2_7_CURR_Y_COUNT(val)  bfin_write16(DMA2_7_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_7_IRQ_STATUS()        bfin_read16(DMA2_7_IRQ_STATUS)
+#define bfin_write_DMA2_7_IRQ_STATUS(val)    bfin_write16(DMA2_7_IRQ_STATUS,val)
+#define bfin_read_DMA2_7_PERIPHERAL_MAP()    bfin_read16(DMA2_7_PERIPHERAL_MAP)
+#define bfin_write_DMA2_7_PERIPHERAL_MAP(val) bfin_write16(DMA2_7_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_8_CONFIG()            bfin_read16(DMA2_8_CONFIG)
+#define bfin_write_DMA2_8_CONFIG(val)        bfin_write16(DMA2_8_CONFIG,val)
+#define bfin_read_DMA2_8_NEXT_DESC_PTR()     bfin_read32(DMA2_8_NEXT_DESC_PTR)
+#define bfin_write_DMA2_8_NEXT_DESC_PTR(val) bfin_write32(DMA2_8_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_8_START_ADDR()        bfin_read32(DMA2_8_START_ADDR)
+#define bfin_write_DMA2_8_START_ADDR(val)    bfin_write32(DMA2_8_START_ADDR,val)
+#define bfin_read_DMA2_8_X_COUNT()           bfin_read16(DMA2_8_X_COUNT)
+#define bfin_write_DMA2_8_X_COUNT(val)       bfin_write16(DMA2_8_X_COUNT,val)
+#define bfin_read_DMA2_8_Y_COUNT()           bfin_read16(DMA2_8_Y_COUNT)
+#define bfin_write_DMA2_8_Y_COUNT(val)       bfin_write16(DMA2_8_Y_COUNT,val)
+#define bfin_read_DMA2_8_X_MODIFY()          bfin_read16(DMA2_8_X_MODIFY)
+#define bfin_write_DMA2_8_X_MODIFY(val)      bfin_write16(DMA2_8_X_MODIFY,val)
+#define bfin_read_DMA2_8_Y_MODIFY()          bfin_read16(DMA2_8_Y_MODIFY)
+#define bfin_write_DMA2_8_Y_MODIFY(val)      bfin_write16(DMA2_8_Y_MODIFY,val)
+#define bfin_read_DMA2_8_CURR_DESC_PTR()     bfin_read32(DMA2_8_CURR_DESC_PTR)
+#define bfin_write_DMA2_8_CURR_DESC_PTR(val) bfin_write32(DMA2_8_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_8_CURR_ADDR()         bfin_read32(DMA2_8_CURR_ADDR)
+#define bfin_write_DMA2_8_CURR_ADDR(val)     bfin_write32(DMA2_8_CURR_ADDR,val)
+#define bfin_read_DMA2_8_CURR_X_COUNT()      bfin_read16(DMA2_8_CURR_X_COUNT)
+#define bfin_write_DMA2_8_CURR_X_COUNT(val)  bfin_write16(DMA2_8_CURR_X_COUNT,val)
+#define bfin_read_DMA2_8_CURR_Y_COUNT()      bfin_read16(DMA2_8_CURR_Y_COUNT)
+#define bfin_write_DMA2_8_CURR_Y_COUNT(val)  bfin_write16(DMA2_8_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_8_IRQ_STATUS()        bfin_read16(DMA2_8_IRQ_STATUS)
+#define bfin_write_DMA2_8_IRQ_STATUS(val)    bfin_write16(DMA2_8_IRQ_STATUS,val)
+#define bfin_read_DMA2_8_PERIPHERAL_MAP()    bfin_read16(DMA2_8_PERIPHERAL_MAP)
+#define bfin_write_DMA2_8_PERIPHERAL_MAP(val) bfin_write16(DMA2_8_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_9_CONFIG()            bfin_read16(DMA2_9_CONFIG)
+#define bfin_write_DMA2_9_CONFIG(val)        bfin_write16(DMA2_9_CONFIG,val)
+#define bfin_read_DMA2_9_NEXT_DESC_PTR()     bfin_read32(DMA2_9_NEXT_DESC_PTR)
+#define bfin_write_DMA2_9_NEXT_DESC_PTR(val) bfin_write32(DMA2_9_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_9_START_ADDR()        bfin_read32(DMA2_9_START_ADDR)
+#define bfin_write_DMA2_9_START_ADDR(val)    bfin_write32(DMA2_9_START_ADDR,val)
+#define bfin_read_DMA2_9_X_COUNT()           bfin_read16(DMA2_9_X_COUNT)
+#define bfin_write_DMA2_9_X_COUNT(val)       bfin_write16(DMA2_9_X_COUNT,val)
+#define bfin_read_DMA2_9_Y_COUNT()           bfin_read16(DMA2_9_Y_COUNT)
+#define bfin_write_DMA2_9_Y_COUNT(val)       bfin_write16(DMA2_9_Y_COUNT,val)
+#define bfin_read_DMA2_9_X_MODIFY()          bfin_read16(DMA2_9_X_MODIFY)
+#define bfin_write_DMA2_9_X_MODIFY(val)      bfin_write16(DMA2_9_X_MODIFY,val)
+#define bfin_read_DMA2_9_Y_MODIFY()          bfin_read16(DMA2_9_Y_MODIFY)
+#define bfin_write_DMA2_9_Y_MODIFY(val)      bfin_write16(DMA2_9_Y_MODIFY,val)
+#define bfin_read_DMA2_9_CURR_DESC_PTR()     bfin_read32(DMA2_9_CURR_DESC_PTR)
+#define bfin_write_DMA2_9_CURR_DESC_PTR(val) bfin_write32(DMA2_9_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_9_CURR_ADDR()         bfin_read32(DMA2_9_CURR_ADDR)
+#define bfin_write_DMA2_9_CURR_ADDR(val)     bfin_write32(DMA2_9_CURR_ADDR,val)
+#define bfin_read_DMA2_9_CURR_X_COUNT()      bfin_read16(DMA2_9_CURR_X_COUNT)
+#define bfin_write_DMA2_9_CURR_X_COUNT(val)  bfin_write16(DMA2_9_CURR_X_COUNT,val)
+#define bfin_read_DMA2_9_CURR_Y_COUNT()      bfin_read16(DMA2_9_CURR_Y_COUNT)
+#define bfin_write_DMA2_9_CURR_Y_COUNT(val)  bfin_write16(DMA2_9_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_9_IRQ_STATUS()        bfin_read16(DMA2_9_IRQ_STATUS)
+#define bfin_write_DMA2_9_IRQ_STATUS(val)    bfin_write16(DMA2_9_IRQ_STATUS,val)
+#define bfin_read_DMA2_9_PERIPHERAL_MAP()    bfin_read16(DMA2_9_PERIPHERAL_MAP)
+#define bfin_write_DMA2_9_PERIPHERAL_MAP(val) bfin_write16(DMA2_9_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_10_CONFIG()           bfin_read16(DMA2_10_CONFIG)
+#define bfin_write_DMA2_10_CONFIG(val)       bfin_write16(DMA2_10_CONFIG,val)
+#define bfin_read_DMA2_10_NEXT_DESC_PTR()    bfin_read32(DMA2_10_NEXT_DESC_PTR)
+#define bfin_write_DMA2_10_NEXT_DESC_PTR(val) bfin_write32(DMA2_10_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_10_START_ADDR()       bfin_read32(DMA2_10_START_ADDR)
+#define bfin_write_DMA2_10_START_ADDR(val)   bfin_write32(DMA2_10_START_ADDR,val)
+#define bfin_read_DMA2_10_X_COUNT()          bfin_read16(DMA2_10_X_COUNT)
+#define bfin_write_DMA2_10_X_COUNT(val)      bfin_write16(DMA2_10_X_COUNT,val)
+#define bfin_read_DMA2_10_Y_COUNT()          bfin_read16(DMA2_10_Y_COUNT)
+#define bfin_write_DMA2_10_Y_COUNT(val)      bfin_write16(DMA2_10_Y_COUNT,val)
+#define bfin_read_DMA2_10_X_MODIFY()         bfin_read16(DMA2_10_X_MODIFY)
+#define bfin_write_DMA2_10_X_MODIFY(val)     bfin_write16(DMA2_10_X_MODIFY,val)
+#define bfin_read_DMA2_10_Y_MODIFY()         bfin_read16(DMA2_10_Y_MODIFY)
+#define bfin_write_DMA2_10_Y_MODIFY(val)     bfin_write16(DMA2_10_Y_MODIFY,val)
+#define bfin_read_DMA2_10_CURR_DESC_PTR()    bfin_read32(DMA2_10_CURR_DESC_PTR)
+#define bfin_write_DMA2_10_CURR_DESC_PTR(val) bfin_write32(DMA2_10_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_10_CURR_ADDR()        bfin_read32(DMA2_10_CURR_ADDR)
+#define bfin_write_DMA2_10_CURR_ADDR(val)    bfin_write32(DMA2_10_CURR_ADDR,val)
+#define bfin_read_DMA2_10_CURR_X_COUNT()     bfin_read16(DMA2_10_CURR_X_COUNT)
+#define bfin_write_DMA2_10_CURR_X_COUNT(val) bfin_write16(DMA2_10_CURR_X_COUNT,val)
+#define bfin_read_DMA2_10_CURR_Y_COUNT()     bfin_read16(DMA2_10_CURR_Y_COUNT)
+#define bfin_write_DMA2_10_CURR_Y_COUNT(val) bfin_write16(DMA2_10_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_10_IRQ_STATUS()       bfin_read16(DMA2_10_IRQ_STATUS)
+#define bfin_write_DMA2_10_IRQ_STATUS(val)   bfin_write16(DMA2_10_IRQ_STATUS,val)
+#define bfin_read_DMA2_10_PERIPHERAL_MAP()   bfin_read16(DMA2_10_PERIPHERAL_MAP)
+#define bfin_write_DMA2_10_PERIPHERAL_MAP(val) bfin_write16(DMA2_10_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_11_CONFIG()           bfin_read16(DMA2_11_CONFIG)
+#define bfin_write_DMA2_11_CONFIG(val)       bfin_write16(DMA2_11_CONFIG,val)
+#define bfin_read_DMA2_11_NEXT_DESC_PTR()    bfin_read32(DMA2_11_NEXT_DESC_PTR)
+#define bfin_write_DMA2_11_NEXT_DESC_PTR(val) bfin_write32(DMA2_11_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_11_START_ADDR()       bfin_read32(DMA2_11_START_ADDR)
+#define bfin_write_DMA2_11_START_ADDR(val)   bfin_write32(DMA2_11_START_ADDR,val)
+#define bfin_read_DMA2_11_X_COUNT()          bfin_read16(DMA2_11_X_COUNT)
+#define bfin_write_DMA2_11_X_COUNT(val)      bfin_write16(DMA2_11_X_COUNT,val)
+#define bfin_read_DMA2_11_Y_COUNT()          bfin_read16(DMA2_11_Y_COUNT)
+#define bfin_write_DMA2_11_Y_COUNT(val)      bfin_write16(DMA2_11_Y_COUNT,val)
+#define bfin_read_DMA2_11_X_MODIFY()         bfin_read16(DMA2_11_X_MODIFY)
+#define bfin_write_DMA2_11_X_MODIFY(val)     bfin_write16(DMA2_11_X_MODIFY,val)
+#define bfin_read_DMA2_11_Y_MODIFY()         bfin_read16(DMA2_11_Y_MODIFY)
+#define bfin_write_DMA2_11_Y_MODIFY(val)     bfin_write16(DMA2_11_Y_MODIFY,val)
+#define bfin_read_DMA2_11_CURR_DESC_PTR()    bfin_read32(DMA2_11_CURR_DESC_PTR)
+#define bfin_write_DMA2_11_CURR_DESC_PTR(val) bfin_write32(DMA2_11_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_11_CURR_ADDR()        bfin_read32(DMA2_11_CURR_ADDR)
+#define bfin_write_DMA2_11_CURR_ADDR(val)    bfin_write32(DMA2_11_CURR_ADDR,val)
+#define bfin_read_DMA2_11_CURR_X_COUNT()     bfin_read16(DMA2_11_CURR_X_COUNT)
+#define bfin_write_DMA2_11_CURR_X_COUNT(val) bfin_write16(DMA2_11_CURR_X_COUNT,val)
+#define bfin_read_DMA2_11_CURR_Y_COUNT()     bfin_read16(DMA2_11_CURR_Y_COUNT)
+#define bfin_write_DMA2_11_CURR_Y_COUNT(val) bfin_write16(DMA2_11_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_11_IRQ_STATUS()       bfin_read16(DMA2_11_IRQ_STATUS)
+#define bfin_write_DMA2_11_IRQ_STATUS(val)   bfin_write16(DMA2_11_IRQ_STATUS,val)
+#define bfin_read_DMA2_11_PERIPHERAL_MAP()   bfin_read16(DMA2_11_PERIPHERAL_MAP)
+#define bfin_write_DMA2_11_PERIPHERAL_MAP(val) bfin_write16(DMA2_11_PERIPHERAL_MAP,val)
+/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */
+#define bfin_read_MDMA_D0_CONFIG()          bfin_read16(MDMA_D0_CONFIG)
+#define bfin_write_MDMA_D0_CONFIG(val)      bfin_write16(MDMA_D0_CONFIG,val)
+#define bfin_read_MDMA_D0_NEXT_DESC_PTR()   bfin_read32(MDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D0_START_ADDR()      bfin_read32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val)  bfin_write32(MDMA_D0_START_ADDR,val)
+#define bfin_read_MDMA_D0_X_COUNT()         bfin_read16(MDMA_D0_X_COUNT)
+#define bfin_write_MDMA_D0_X_COUNT(val)     bfin_write16(MDMA_D0_X_COUNT,val)
+#define bfin_read_MDMA_D0_Y_COUNT()         bfin_read16(MDMA_D0_Y_COUNT)
+#define bfin_write_MDMA_D0_Y_COUNT(val)     bfin_write16(MDMA_D0_Y_COUNT,val)
+#define bfin_read_MDMA_D0_X_MODIFY()        bfin_read16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val)    bfin_write16(MDMA_D0_X_MODIFY,val)
+#define bfin_read_MDMA_D0_Y_MODIFY()        bfin_read16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val)    bfin_write16(MDMA_D0_Y_MODIFY,val)
+#define bfin_read_MDMA_D0_CURR_DESC_PTR()   bfin_read32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D0_CURR_ADDR()       bfin_read32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val)   bfin_write32(MDMA_D0_CURR_ADDR,val)
+#define bfin_read_MDMA_D0_CURR_X_COUNT()    bfin_read16(MDMA_D0_CURR_X_COUNT)
+#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D0_CURR_Y_COUNT()    bfin_read16(MDMA_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D0_IRQ_STATUS()      bfin_read16(MDMA_D0_IRQ_STATUS)
+#define bfin_write_MDMA_D0_IRQ_STATUS(val)  bfin_write16(MDMA_D0_IRQ_STATUS,val)
+#define bfin_read_MDMA_D0_PERIPHERAL_MAP()  bfin_read16(MDMA_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA_S0_CONFIG()          bfin_read16(MDMA_S0_CONFIG)
+#define bfin_write_MDMA_S0_CONFIG(val)      bfin_write16(MDMA_S0_CONFIG,val)
+#define bfin_read_MDMA_S0_NEXT_DESC_PTR()   bfin_read32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S0_START_ADDR()      bfin_read32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val)  bfin_write32(MDMA_S0_START_ADDR,val)
+#define bfin_read_MDMA_S0_X_COUNT()         bfin_read16(MDMA_S0_X_COUNT)
+#define bfin_write_MDMA_S0_X_COUNT(val)     bfin_write16(MDMA_S0_X_COUNT,val)
+#define bfin_read_MDMA_S0_Y_COUNT()         bfin_read16(MDMA_S0_Y_COUNT)
+#define bfin_write_MDMA_S0_Y_COUNT(val)     bfin_write16(MDMA_S0_Y_COUNT,val)
+#define bfin_read_MDMA_S0_X_MODIFY()        bfin_read16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val)    bfin_write16(MDMA_S0_X_MODIFY,val)
+#define bfin_read_MDMA_S0_Y_MODIFY()        bfin_read16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val)    bfin_write16(MDMA_S0_Y_MODIFY,val)
+#define bfin_read_MDMA_S0_CURR_DESC_PTR()   bfin_read32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S0_CURR_ADDR()       bfin_read32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val)   bfin_write32(MDMA_S0_CURR_ADDR,val)
+#define bfin_read_MDMA_S0_CURR_X_COUNT()    bfin_read16(MDMA_S0_CURR_X_COUNT)
+#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S0_CURR_Y_COUNT()    bfin_read16(MDMA_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S0_IRQ_STATUS()      bfin_read16(MDMA_S0_IRQ_STATUS)
+#define bfin_write_MDMA_S0_IRQ_STATUS(val)  bfin_write16(MDMA_S0_IRQ_STATUS,val)
+#define bfin_read_MDMA_S0_PERIPHERAL_MAP()  bfin_read16(MDMA_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA_D1_CONFIG()          bfin_read16(MDMA_D1_CONFIG)
+#define bfin_write_MDMA_D1_CONFIG(val)      bfin_write16(MDMA_D1_CONFIG,val)
+#define bfin_read_MDMA_D1_NEXT_DESC_PTR()   bfin_read32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D1_START_ADDR()      bfin_read32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val)  bfin_write32(MDMA_D1_START_ADDR,val)
+#define bfin_read_MDMA_D1_X_COUNT()         bfin_read16(MDMA_D1_X_COUNT)
+#define bfin_write_MDMA_D1_X_COUNT(val)     bfin_write16(MDMA_D1_X_COUNT,val)
+#define bfin_read_MDMA_D1_Y_COUNT()         bfin_read16(MDMA_D1_Y_COUNT)
+#define bfin_write_MDMA_D1_Y_COUNT(val)     bfin_write16(MDMA_D1_Y_COUNT,val)
+#define bfin_read_MDMA_D1_X_MODIFY()        bfin_read16(MDMA_D1_X_MODIFY)
+#define bfin_write_MDMA_D1_X_MODIFY(val)    bfin_write16(MDMA_D1_X_MODIFY,val)
+#define bfin_read_MDMA_D1_Y_MODIFY()        bfin_read16(MDMA_D1_Y_MODIFY)
+#define bfin_write_MDMA_D1_Y_MODIFY(val)    bfin_write16(MDMA_D1_Y_MODIFY,val)
+#define bfin_read_MDMA_D1_CURR_DESC_PTR()   bfin_read32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D1_CURR_ADDR()       bfin_read32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val)   bfin_write32(MDMA_D1_CURR_ADDR,val)
+#define bfin_read_MDMA_D1_CURR_X_COUNT()    bfin_read16(MDMA_D1_CURR_X_COUNT)
+#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D1_CURR_Y_COUNT()    bfin_read16(MDMA_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()      bfin_read16(MDMA_D1_IRQ_STATUS)
+#define bfin_write_MDMA_D1_IRQ_STATUS(val)  bfin_write16(MDMA_D1_IRQ_STATUS,val)
+#define bfin_read_MDMA_D1_PERIPHERAL_MAP()  bfin_read16(MDMA_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA_S1_CONFIG()          bfin_read16(MDMA_S1_CONFIG)
+#define bfin_write_MDMA_S1_CONFIG(val)      bfin_write16(MDMA_S1_CONFIG,val)
+#define bfin_read_MDMA_S1_NEXT_DESC_PTR()   bfin_read32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S1_START_ADDR()      bfin_read32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val)  bfin_write32(MDMA_S1_START_ADDR,val)
+#define bfin_read_MDMA_S1_X_COUNT()         bfin_read16(MDMA_S1_X_COUNT)
+#define bfin_write_MDMA_S1_X_COUNT(val)     bfin_write16(MDMA_S1_X_COUNT,val)
+#define bfin_read_MDMA_S1_Y_COUNT()         bfin_read16(MDMA_S1_Y_COUNT)
+#define bfin_write_MDMA_S1_Y_COUNT(val)     bfin_write16(MDMA_S1_Y_COUNT,val)
+#define bfin_read_MDMA_S1_X_MODIFY()        bfin_read16(MDMA_S1_X_MODIFY)
+#define bfin_write_MDMA_S1_X_MODIFY(val)    bfin_write16(MDMA_S1_X_MODIFY,val)
+#define bfin_read_MDMA_S1_Y_MODIFY()        bfin_read16(MDMA_S1_Y_MODIFY)
+#define bfin_write_MDMA_S1_Y_MODIFY(val)    bfin_write16(MDMA_S1_Y_MODIFY,val)
+#define bfin_read_MDMA_S1_CURR_DESC_PTR()   bfin_read32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S1_CURR_ADDR()       bfin_read32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val)   bfin_write32(MDMA_S1_CURR_ADDR,val)
+#define bfin_read_MDMA_S1_CURR_X_COUNT()    bfin_read16(MDMA_S1_CURR_X_COUNT)
+#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S1_CURR_Y_COUNT()    bfin_read16(MDMA_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()      bfin_read16(MDMA_S1_IRQ_STATUS)
+#define bfin_write_MDMA_S1_IRQ_STATUS(val)  bfin_write16(MDMA_S1_IRQ_STATUS,val)
+#define bfin_read_MDMA_S1_PERIPHERAL_MAP()  bfin_read16(MDMA_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP,val)
+/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */
+#define bfin_read_IMDMA_D0_CONFIG()          bfin_read16(IMDMA_D0_CONFIG)
+#define bfin_write_IMDMA_D0_CONFIG(val)      bfin_write16(IMDMA_D0_CONFIG,val)
+#define bfin_read_IMDMA_D0_NEXT_DESC_PTR()   bfin_read32(IMDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_IMDMA_D0_NEXT_DESC_PTR(val) bfin_write32(IMDMA_D0_NEXT_DESC_PTR,val)
+#define bfin_read_IMDMA_D0_START_ADDR()      bfin_read32(IMDMA_D0_START_ADDR)
+#define bfin_write_IMDMA_D0_START_ADDR(val)  bfin_write32(IMDMA_D0_START_ADDR,val)
+#define bfin_read_IMDMA_D0_X_COUNT()         bfin_read16(IMDMA_D0_X_COUNT)
+#define bfin_write_IMDMA_D0_X_COUNT(val)     bfin_write16(IMDMA_D0_X_COUNT,val)
+#define bfin_read_IMDMA_D0_Y_COUNT()         bfin_read16(IMDMA_D0_Y_COUNT)
+#define bfin_write_IMDMA_D0_Y_COUNT(val)     bfin_write16(IMDMA_D0_Y_COUNT,val)
+#define bfin_read_IMDMA_D0_X_MODIFY()        bfin_read16(IMDMA_D0_X_MODIFY)
+#define bfin_write_IMDMA_D0_X_MODIFY(val)    bfin_write16(IMDMA_D0_X_MODIFY,val)
+#define bfin_read_IMDMA_D0_Y_MODIFY()        bfin_read16(IMDMA_D0_Y_MODIFY)
+#define bfin_write_IMDMA_D0_Y_MODIFY(val)    bfin_write16(IMDMA_D0_Y_MODIFY,val)
+#define bfin_read_IMDMA_D0_CURR_DESC_PTR()   bfin_read32(IMDMA_D0_CURR_DESC_PTR)
+#define bfin_write_IMDMA_D0_CURR_DESC_PTR(val) bfin_write32(IMDMA_D0_CURR_DESC_PTR,val)
+#define bfin_read_IMDMA_D0_CURR_ADDR()       bfin_read32(IMDMA_D0_CURR_ADDR)
+#define bfin_write_IMDMA_D0_CURR_ADDR(val)   bfin_write32(IMDMA_D0_CURR_ADDR,val)
+#define bfin_read_IMDMA_D0_CURR_X_COUNT()    bfin_read16(IMDMA_D0_CURR_X_COUNT)
+#define bfin_write_IMDMA_D0_CURR_X_COUNT(val) bfin_write16(IMDMA_D0_CURR_X_COUNT,val)
+#define bfin_read_IMDMA_D0_CURR_Y_COUNT()    bfin_read16(IMDMA_D0_CURR_Y_COUNT)
+#define bfin_write_IMDMA_D0_CURR_Y_COUNT(val) bfin_write16(IMDMA_D0_CURR_Y_COUNT,val)
+#define bfin_read_IMDMA_D0_IRQ_STATUS()      bfin_read16(IMDMA_D0_IRQ_STATUS)
+#define bfin_write_IMDMA_D0_IRQ_STATUS(val)  bfin_write16(IMDMA_D0_IRQ_STATUS,val)
+#define bfin_read_IMDMA_S0_CONFIG()          bfin_read16(IMDMA_S0_CONFIG)
+#define bfin_write_IMDMA_S0_CONFIG(val)      bfin_write16(IMDMA_S0_CONFIG,val)
+#define bfin_read_IMDMA_S0_NEXT_DESC_PTR()   bfin_read32(IMDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_IMDMA_S0_NEXT_DESC_PTR(val) bfin_write32(IMDMA_S0_NEXT_DESC_PTR,val)
+#define bfin_read_IMDMA_S0_START_ADDR()      bfin_read32(IMDMA_S0_START_ADDR)
+#define bfin_write_IMDMA_S0_START_ADDR(val)  bfin_write32(IMDMA_S0_START_ADDR,val)
+#define bfin_read_IMDMA_S0_X_COUNT()         bfin_read16(IMDMA_S0_X_COUNT)
+#define bfin_write_IMDMA_S0_X_COUNT(val)     bfin_write16(IMDMA_S0_X_COUNT,val)
+#define bfin_read_IMDMA_S0_Y_COUNT()         bfin_read16(IMDMA_S0_Y_COUNT)
+#define bfin_write_IMDMA_S0_Y_COUNT(val)     bfin_write16(IMDMA_S0_Y_COUNT,val)
+#define bfin_read_IMDMA_S0_X_MODIFY()        bfin_read16(IMDMA_S0_X_MODIFY)
+#define bfin_write_IMDMA_S0_X_MODIFY(val)    bfin_write16(IMDMA_S0_X_MODIFY,val)
+#define bfin_read_IMDMA_S0_Y_MODIFY()        bfin_read16(IMDMA_S0_Y_MODIFY)
+#define bfin_write_IMDMA_S0_Y_MODIFY(val)    bfin_write16(IMDMA_S0_Y_MODIFY,val)
+#define bfin_read_IMDMA_S0_CURR_DESC_PTR()   bfin_read32(IMDMA_S0_CURR_DESC_PTR)
+#define bfin_write_IMDMA_S0_CURR_DESC_PTR(val) bfin_write32(IMDMA_S0_CURR_DESC_PTR,val)
+#define bfin_read_IMDMA_S0_CURR_ADDR()       bfin_read32(IMDMA_S0_CURR_ADDR)
+#define bfin_write_IMDMA_S0_CURR_ADDR(val)   bfin_write32(IMDMA_S0_CURR_ADDR,val)
+#define bfin_read_IMDMA_S0_CURR_X_COUNT()    bfin_read16(IMDMA_S0_CURR_X_COUNT)
+#define bfin_write_IMDMA_S0_CURR_X_COUNT(val) bfin_write16(IMDMA_S0_CURR_X_COUNT,val)
+#define bfin_read_IMDMA_S0_CURR_Y_COUNT()    bfin_read16(IMDMA_S0_CURR_Y_COUNT)
+#define bfin_write_IMDMA_S0_CURR_Y_COUNT(val) bfin_write16(IMDMA_S0_CURR_Y_COUNT,val)
+#define bfin_read_IMDMA_S0_IRQ_STATUS()      bfin_read16(IMDMA_S0_IRQ_STATUS)
+#define bfin_write_IMDMA_S0_IRQ_STATUS(val)  bfin_write16(IMDMA_S0_IRQ_STATUS,val)
+#define bfin_read_IMDMA_D1_CONFIG()          bfin_read16(IMDMA_D1_CONFIG)
+#define bfin_write_IMDMA_D1_CONFIG(val)      bfin_write16(IMDMA_D1_CONFIG,val)
+#define bfin_read_IMDMA_D1_NEXT_DESC_PTR()   bfin_read32(IMDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_IMDMA_D1_NEXT_DESC_PTR(val) bfin_write32(IMDMA_D1_NEXT_DESC_PTR,val)
+#define bfin_read_IMDMA_D1_START_ADDR()      bfin_read32(IMDMA_D1_START_ADDR)
+#define bfin_write_IMDMA_D1_START_ADDR(val)  bfin_write32(IMDMA_D1_START_ADDR,val)
+#define bfin_read_IMDMA_D1_X_COUNT()         bfin_read16(IMDMA_D1_X_COUNT)
+#define bfin_write_IMDMA_D1_X_COUNT(val)     bfin_write16(IMDMA_D1_X_COUNT,val)
+#define bfin_read_IMDMA_D1_Y_COUNT()         bfin_read16(IMDMA_D1_Y_COUNT)
+#define bfin_write_IMDMA_D1_Y_COUNT(val)     bfin_write16(IMDMA_D1_Y_COUNT,val)
+#define bfin_read_IMDMA_D1_X_MODIFY()        bfin_read16(IMDMA_D1_X_MODIFY)
+#define bfin_write_IMDMA_D1_X_MODIFY(val)    bfin_write16(IMDMA_D1_X_MODIFY,val)
+#define bfin_read_IMDMA_D1_Y_MODIFY()        bfin_read16(IMDMA_D1_Y_MODIFY)
+#define bfin_write_IMDMA_D1_Y_MODIFY(val)    bfin_write16(IMDMA_D1_Y_MODIFY,val)
+#define bfin_read_IMDMA_D1_CURR_DESC_PTR()   bfin_read32(IMDMA_D1_CURR_DESC_PTR)
+#define bfin_write_IMDMA_D1_CURR_DESC_PTR(val) bfin_write32(IMDMA_D1_CURR_DESC_PTR,val)
+#define bfin_read_IMDMA_D1_CURR_ADDR()       bfin_read32(IMDMA_D1_CURR_ADDR)
+#define bfin_write_IMDMA_D1_CURR_ADDR(val)   bfin_write32(IMDMA_D1_CURR_ADDR,val)
+#define bfin_read_IMDMA_D1_CURR_X_COUNT()    bfin_read16(IMDMA_D1_CURR_X_COUNT)
+#define bfin_write_IMDMA_D1_CURR_X_COUNT(val) bfin_write16(IMDMA_D1_CURR_X_COUNT,val)
+#define bfin_read_IMDMA_D1_CURR_Y_COUNT()    bfin_read16(IMDMA_D1_CURR_Y_COUNT)
+#define bfin_write_IMDMA_D1_CURR_Y_COUNT(val) bfin_write16(IMDMA_D1_CURR_Y_COUNT,val)
+#define bfin_read_IMDMA_D1_IRQ_STATUS()      bfin_read16(IMDMA_D1_IRQ_STATUS)
+#define bfin_write_IMDMA_D1_IRQ_STATUS(val)  bfin_write16(IMDMA_D1_IRQ_STATUS,val)
+#define bfin_read_IMDMA_S1_CONFIG()          bfin_read16(IMDMA_S1_CONFIG)
+#define bfin_write_IMDMA_S1_CONFIG(val)      bfin_write16(IMDMA_S1_CONFIG,val)
+#define bfin_read_IMDMA_S1_NEXT_DESC_PTR()   bfin_read32(IMDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_IMDMA_S1_NEXT_DESC_PTR(val) bfin_write32(IMDMA_S1_NEXT_DESC_PTR,val)
+#define bfin_read_IMDMA_S1_START_ADDR()      bfin_read32(IMDMA_S1_START_ADDR)
+#define bfin_write_IMDMA_S1_START_ADDR(val)  bfin_write32(IMDMA_S1_START_ADDR,val)
+#define bfin_read_IMDMA_S1_X_COUNT()         bfin_read16(IMDMA_S1_X_COUNT)
+#define bfin_write_IMDMA_S1_X_COUNT(val)     bfin_write16(IMDMA_S1_X_COUNT,val)
+#define bfin_read_IMDMA_S1_Y_COUNT()         bfin_read16(IMDMA_S1_Y_COUNT)
+#define bfin_write_IMDMA_S1_Y_COUNT(val)     bfin_write16(IMDMA_S1_Y_COUNT,val)
+#define bfin_read_IMDMA_S1_X_MODIFY()        bfin_read16(IMDMA_S1_X_MODIFY)
+#define bfin_write_IMDMA_S1_X_MODIFY(val)    bfin_write16(IMDMA_S1_X_MODIFY,val)
+#define bfin_read_IMDMA_S1_Y_MODIFY()        bfin_read16(IMDMA_S1_Y_MODIFY)
+#define bfin_write_IMDMA_S1_Y_MODIFY(val)    bfin_write16(IMDMA_S1_Y_MODIFY,val)
+#define bfin_read_IMDMA_S1_CURR_DESC_PTR()   bfin_read32(IMDMA_S1_CURR_DESC_PTR)
+#define bfin_write_IMDMA_S1_CURR_DESC_PTR(val) bfin_write32(IMDMA_S1_CURR_DESC_PTR,val)
+#define bfin_read_IMDMA_S1_CURR_ADDR()       bfin_read32(IMDMA_S1_CURR_ADDR)
+#define bfin_write_IMDMA_S1_CURR_ADDR(val)   bfin_write32(IMDMA_S1_CURR_ADDR,val)
+#define bfin_read_IMDMA_S1_CURR_X_COUNT()    bfin_read16(IMDMA_S1_CURR_X_COUNT)
+#define bfin_write_IMDMA_S1_CURR_X_COUNT(val) bfin_write16(IMDMA_S1_CURR_X_COUNT,val)
+#define bfin_read_IMDMA_S1_CURR_Y_COUNT()    bfin_read16(IMDMA_S1_CURR_Y_COUNT)
+#define bfin_write_IMDMA_S1_CURR_Y_COUNT(val) bfin_write16(IMDMA_S1_CURR_Y_COUNT,val)
+#define bfin_read_IMDMA_S1_IRQ_STATUS()      bfin_read16(IMDMA_S1_IRQ_STATUS)
+#define bfin_write_IMDMA_S1_IRQ_STATUS(val)  bfin_write16(IMDMA_S1_IRQ_STATUS,val)
+
+#endif				/* _CDEF_BF561_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/defBF561.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/defBF561.h
new file mode 100644
index 0000000..9f21f76
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/defBF561.h
@@ -0,0 +1,1402 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF561_H
+#define _DEF_BF561_H
+
+/*********************************************************************************** */
+/* System MMR Register Map */
+/*********************************************************************************** */
+
+/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
+
+#define PLL_CTL                0xFFC00000	/* PLL Control register (16-bit) */
+#define PLL_DIV			        0xFFC00004	/* PLL Divide Register (16-bit) */
+#define VR_CTL			        0xFFC00008	/* Voltage Regulator Control Register (16-bit) */
+#define PLL_STAT               0xFFC0000C	/* PLL Status register (16-bit) */
+#define PLL_LOCKCNT            0xFFC00010	/* PLL Lock Count register (16-bit) */
+#define CHIPID                 0xFFC00014       /* Chip ID Register */
+
+/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
+#define DOUBLE_FAULT            (DOUBLE_FAULT_B|DOUBLE_FAULT_A)
+#define RESET_DOUBLE            (SWRST_DBL_FAULT_B|SWRST_DBL_FAULT_A)
+#define RESET_WDOG              (SWRST_WDT_B|SWRST_WDT_A)
+#define RESET_SOFTWARE          (SWRST_OCCURRED)
+
+/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
+#define SWRST                   0xFFC00100	/* Software Reset register */
+#define SYSCR                   0xFFC00104	/* System Reset Configuration register */
+#define SIC_RVECT               0xFFC00108	/* SIC Reset Vector Address Register */
+#define SIC_IMASK0              0xFFC0010C	/* SIC Interrupt Mask register 0 */
+#define SIC_IMASK1              0xFFC00110	/* SIC Interrupt Mask register 1 */
+#define SIC_IAR0                0xFFC00124	/* SIC Interrupt Assignment Register 0 */
+#define SIC_IAR1                0xFFC00128	/* SIC Interrupt Assignment Register 1 */
+#define SIC_IAR2                0xFFC0012C	/* SIC Interrupt Assignment Register 2 */
+#define SIC_IAR3                0xFFC00130	/* SIC Interrupt Assignment Register 3 */
+#define SIC_IAR4                0xFFC00134	/* SIC Interrupt Assignment Register 4 */
+#define SIC_IAR5                0xFFC00138	/* SIC Interrupt Assignment Register 5 */
+#define SIC_IAR6                0xFFC0013C	/* SIC Interrupt Assignment Register 6 */
+#define SIC_IAR7                0xFFC00140	/* SIC Interrupt Assignment Register 7 */
+#define SIC_ISR0                0xFFC00114	/* SIC Interrupt Status register 0 */
+#define SIC_ISR1                0xFFC00118	/* SIC Interrupt Status register 1 */
+#define SIC_IWR0                0xFFC0011C	/* SIC Interrupt Wakeup-Enable register 0 */
+#define SIC_IWR1                0xFFC00120	/* SIC Interrupt Wakeup-Enable register 1 */
+
+/* System Reset and Interrupt Controller registers for Core B (0xFFC0 1100-0xFFC0 11FF) */
+#define SICB_SWRST              0xFFC01100	/* reserved */
+#define SICB_SYSCR              0xFFC01104	/* reserved */
+#define SICB_RVECT              0xFFC01108	/* SIC Reset Vector Address Register */
+#define SICB_IMASK0             0xFFC0110C	/* SIC Interrupt Mask register 0 */
+#define SICB_IMASK1             0xFFC01110	/* SIC Interrupt Mask register 1 */
+#define SICB_IAR0               0xFFC01124	/* SIC Interrupt Assignment Register 0 */
+#define SICB_IAR1               0xFFC01128	/* SIC Interrupt Assignment Register 1 */
+#define SICB_IAR2               0xFFC0112C	/* SIC Interrupt Assignment Register 2 */
+#define SICB_IAR3               0xFFC01130	/* SIC Interrupt Assignment Register 3 */
+#define SICB_IAR4               0xFFC01134	/* SIC Interrupt Assignment Register 4 */
+#define SICB_IAR5               0xFFC01138	/* SIC Interrupt Assignment Register 5 */
+#define SICB_IAR6               0xFFC0113C	/* SIC Interrupt Assignment Register 6 */
+#define SICB_IAR7               0xFFC01140	/* SIC Interrupt Assignment Register 7 */
+#define SICB_ISR0               0xFFC01114	/* SIC Interrupt Status register 0 */
+#define SICB_ISR1               0xFFC01118	/* SIC Interrupt Status register 1 */
+#define SICB_IWR0               0xFFC0111C	/* SIC Interrupt Wakeup-Enable register 0 */
+#define SICB_IWR1               0xFFC01120	/* SIC Interrupt Wakeup-Enable register 1 */
+
+/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */
+#define WDOGA_CTL 				0xFFC00200	/* Watchdog Control register */
+#define WDOGA_CNT 				0xFFC00204	/* Watchdog Count register */
+#define WDOGA_STAT 				0xFFC00208	/* Watchdog Status register */
+
+/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */
+#define WDOGB_CTL 				0xFFC01200	/* Watchdog Control register */
+#define WDOGB_CNT 				0xFFC01204	/* Watchdog Count register */
+#define WDOGB_STAT 				0xFFC01208	/* Watchdog Status register */
+
+/* UART Controller (0xFFC00400 - 0xFFC004FF) */
+
+/*
+ * Because include/linux/serial_reg.h have defined UART_*,
+ * So we define blackfin uart regs to BFIN_UART0_*.
+ */
+#define BFIN_UART_THR			0xFFC00400  /* Transmit Holding register */
+#define BFIN_UART_RBR			0xFFC00400  /* Receive Buffer register */
+#define BFIN_UART_DLL			0xFFC00400  /* Divisor Latch (Low-Byte) */
+#define BFIN_UART_IER			0xFFC00404  /* Interrupt Enable Register */
+#define BFIN_UART_DLH			0xFFC00404  /* Divisor Latch (High-Byte) */
+#define BFIN_UART_IIR			0xFFC00408  /* Interrupt Identification Register */
+#define BFIN_UART_LCR			0xFFC0040C  /* Line Control Register */
+#define BFIN_UART_MCR			0xFFC00410  /* Modem Control Register */
+#define BFIN_UART_LSR			0xFFC00414  /* Line Status Register */
+#define BFIN_UART_MSR			0xFFC00418  /* Modem Status Register */
+#define BFIN_UART_SCR			0xFFC0041C  /* SCR Scratch Register */
+#define BFIN_UART_GCTL			0xFFC00424  /* Global Control Register */
+
+/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define SPI0_REGBASE          		0xFFC00500
+#define SPI_CTL               		0xFFC00500	/* SPI Control Register */
+#define SPI_FLG               		0xFFC00504	/* SPI Flag register */
+#define SPI_STAT              		0xFFC00508	/* SPI Status register */
+#define SPI_TDBR              		0xFFC0050C	/* SPI Transmit Data Buffer Register */
+#define SPI_RDBR              		0xFFC00510	/* SPI Receive Data Buffer Register */
+#define SPI_BAUD              		0xFFC00514	/* SPI Baud rate Register */
+#define SPI_SHADOW            		0xFFC00518	/* SPI_RDBR Shadow Register */
+
+/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */
+#define TIMER0_CONFIG 				0xFFC00600	/* Timer0 Configuration register */
+#define TIMER0_COUNTER 				0xFFC00604	/* Timer0 Counter register */
+#define TIMER0_PERIOD 				0xFFC00608	/* Timer0 Period register */
+#define TIMER0_WIDTH 				0xFFC0060C	/* Timer0 Width register */
+
+#define TIMER1_CONFIG 				0xFFC00610	/* Timer1 Configuration register */
+#define TIMER1_COUNTER 				0xFFC00614	/* Timer1 Counter register */
+#define TIMER1_PERIOD 				0xFFC00618	/* Timer1 Period register */
+#define TIMER1_WIDTH 				0xFFC0061C	/* Timer1 Width register */
+
+#define TIMER2_CONFIG 				0xFFC00620	/* Timer2 Configuration register */
+#define TIMER2_COUNTER 				0xFFC00624	/* Timer2 Counter register */
+#define TIMER2_PERIOD 				0xFFC00628	/* Timer2 Period register */
+#define TIMER2_WIDTH 				0xFFC0062C	/* Timer2 Width register */
+
+#define TIMER3_CONFIG 				0xFFC00630	/* Timer3 Configuration register */
+#define TIMER3_COUNTER 				0xFFC00634	/* Timer3 Counter register */
+#define TIMER3_PERIOD 				0xFFC00638	/* Timer3 Period register */
+#define TIMER3_WIDTH 				0xFFC0063C	/* Timer3 Width register */
+
+#define TIMER4_CONFIG 				0xFFC00640	/* Timer4 Configuration register */
+#define TIMER4_COUNTER 				0xFFC00644	/* Timer4 Counter register */
+#define TIMER4_PERIOD 				0xFFC00648	/* Timer4 Period register */
+#define TIMER4_WIDTH 				0xFFC0064C	/* Timer4 Width register */
+
+#define TIMER5_CONFIG 				0xFFC00650	/* Timer5 Configuration register */
+#define TIMER5_COUNTER 				0xFFC00654	/* Timer5 Counter register */
+#define TIMER5_PERIOD 				0xFFC00658	/* Timer5 Period register */
+#define TIMER5_WIDTH 				0xFFC0065C	/* Timer5 Width register */
+
+#define TIMER6_CONFIG 				0xFFC00660	/* Timer6 Configuration register */
+#define TIMER6_COUNTER 				0xFFC00664	/* Timer6 Counter register */
+#define TIMER6_PERIOD 				0xFFC00668	/* Timer6 Period register */
+#define TIMER6_WIDTH 				0xFFC0066C	/* Timer6 Width register */
+
+#define TIMER7_CONFIG 				0xFFC00670	/* Timer7 Configuration register */
+#define TIMER7_COUNTER 				0xFFC00674	/* Timer7 Counter register */
+#define TIMER7_PERIOD 				0xFFC00678	/* Timer7 Period register */
+#define TIMER7_WIDTH 				0xFFC0067C	/* Timer7 Width register */
+
+#define TMRS8_ENABLE 				0xFFC00680	/* Timer Enable Register */
+#define TMRS8_DISABLE 				0xFFC00684	/* Timer Disable register */
+#define TMRS8_STATUS 				0xFFC00688	/* Timer Status register */
+
+/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */
+#define TIMER8_CONFIG 				0xFFC01600	/* Timer8 Configuration register */
+#define TIMER8_COUNTER 				0xFFC01604	/* Timer8 Counter register */
+#define TIMER8_PERIOD 				0xFFC01608	/* Timer8 Period register */
+#define TIMER8_WIDTH 				0xFFC0160C	/* Timer8 Width register */
+
+#define TIMER9_CONFIG 				0xFFC01610	/* Timer9 Configuration register */
+#define TIMER9_COUNTER 				0xFFC01614	/* Timer9 Counter register */
+#define TIMER9_PERIOD 				0xFFC01618	/* Timer9 Period register */
+#define TIMER9_WIDTH 				0xFFC0161C	/* Timer9 Width register */
+
+#define TIMER10_CONFIG 				0xFFC01620	/* Timer10 Configuration register */
+#define TIMER10_COUNTER 			0xFFC01624	/* Timer10 Counter register */
+#define TIMER10_PERIOD 				0xFFC01628	/* Timer10 Period register */
+#define TIMER10_WIDTH 				0xFFC0162C	/* Timer10 Width register */
+
+#define TIMER11_CONFIG 				0xFFC01630	/* Timer11 Configuration register */
+#define TIMER11_COUNTER 			0xFFC01634	/* Timer11 Counter register */
+#define TIMER11_PERIOD 				0xFFC01638	/* Timer11 Period register */
+#define TIMER11_WIDTH 				0xFFC0163C	/* Timer11 Width register */
+
+#define TMRS4_ENABLE 				0xFFC01640	/* Timer Enable Register */
+#define TMRS4_DISABLE 				0xFFC01644	/* Timer Disable register */
+#define TMRS4_STATUS 				0xFFC01648	/* Timer Status register */
+
+/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */
+#define FIO0_FLAG_D 				0xFFC00700	/* Flag Data register */
+#define FIO0_FLAG_C 				0xFFC00704	/* Flag Clear register */
+#define FIO0_FLAG_S 				0xFFC00708	/* Flag Set register */
+#define FIO0_FLAG_T 				0xFFC0070C	/* Flag Toggle register */
+#define FIO0_MASKA_D 				0xFFC00710	/* Flag Mask Interrupt A Data register */
+#define FIO0_MASKA_C 				0xFFC00714	/* Flag Mask Interrupt A Clear register */
+#define FIO0_MASKA_S 				0xFFC00718	/* Flag Mask Interrupt A Set register */
+#define FIO0_MASKA_T 				0xFFC0071C	/* Flag Mask Interrupt A Toggle register */
+#define FIO0_MASKB_D 				0xFFC00720	/* Flag Mask Interrupt B Data register */
+#define FIO0_MASKB_C 				0xFFC00724	/* Flag Mask Interrupt B Clear register */
+#define FIO0_MASKB_S 				0xFFC00728	/* Flag Mask Interrupt B Set register */
+#define FIO0_MASKB_T 				0xFFC0072C	/* Flag Mask Interrupt B Toggle register */
+#define FIO0_DIR 					0xFFC00730	/* Flag Direction register */
+#define FIO0_POLAR 					0xFFC00734	/* Flag Polarity register */
+#define FIO0_EDGE 					0xFFC00738	/* Flag Interrupt Sensitivity register */
+#define FIO0_BOTH 					0xFFC0073C	/* Flag Set on Both Edges register */
+#define FIO0_INEN 					0xFFC00740	/* Flag Input Enable register */
+
+/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */
+#define FIO1_FLAG_D 				0xFFC01500	/* Flag Data register (mask used to directly */
+#define FIO1_FLAG_C 				0xFFC01504	/* Flag Clear register */
+#define FIO1_FLAG_S 				0xFFC01508	/* Flag Set register */
+#define FIO1_FLAG_T 				0xFFC0150C	/* Flag Toggle register (mask used to */
+#define FIO1_MASKA_D 				0xFFC01510	/* Flag Mask Interrupt A Data register */
+#define FIO1_MASKA_C 				0xFFC01514	/* Flag Mask Interrupt A Clear register */
+#define FIO1_MASKA_S 				0xFFC01518	/* Flag Mask Interrupt A Set register */
+#define FIO1_MASKA_T 				0xFFC0151C	/* Flag Mask Interrupt A Toggle register */
+#define FIO1_MASKB_D 				0xFFC01520	/* Flag Mask Interrupt B Data register */
+#define FIO1_MASKB_C 				0xFFC01524	/* Flag Mask Interrupt B Clear register */
+#define FIO1_MASKB_S 				0xFFC01528	/* Flag Mask Interrupt B Set register */
+#define FIO1_MASKB_T 				0xFFC0152C	/* Flag Mask Interrupt B Toggle register */
+#define FIO1_DIR 					0xFFC01530	/* Flag Direction register */
+#define FIO1_POLAR 					0xFFC01534	/* Flag Polarity register */
+#define FIO1_EDGE 					0xFFC01538	/* Flag Interrupt Sensitivity register */
+#define FIO1_BOTH 					0xFFC0153C	/* Flag Set on Both Edges register */
+#define FIO1_INEN 					0xFFC01540	/* Flag Input Enable register */
+
+/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */
+#define FIO2_FLAG_D 				0xFFC01700	/* Flag Data register (mask used to directly */
+#define FIO2_FLAG_C 				0xFFC01704	/* Flag Clear register */
+#define FIO2_FLAG_S 				0xFFC01708	/* Flag Set register */
+#define FIO2_FLAG_T 				0xFFC0170C	/* Flag Toggle register (mask used to */
+#define FIO2_MASKA_D 				0xFFC01710	/* Flag Mask Interrupt A Data register */
+#define FIO2_MASKA_C 				0xFFC01714	/* Flag Mask Interrupt A Clear register */
+#define FIO2_MASKA_S 				0xFFC01718	/* Flag Mask Interrupt A Set register */
+#define FIO2_MASKA_T 				0xFFC0171C	/* Flag Mask Interrupt A Toggle register */
+#define FIO2_MASKB_D 				0xFFC01720	/* Flag Mask Interrupt B Data register */
+#define FIO2_MASKB_C 				0xFFC01724	/* Flag Mask Interrupt B Clear register */
+#define FIO2_MASKB_S 				0xFFC01728	/* Flag Mask Interrupt B Set register */
+#define FIO2_MASKB_T 				0xFFC0172C	/* Flag Mask Interrupt B Toggle register */
+#define FIO2_DIR 					0xFFC01730	/* Flag Direction register */
+#define FIO2_POLAR 					0xFFC01734	/* Flag Polarity register */
+#define FIO2_EDGE 					0xFFC01738	/* Flag Interrupt Sensitivity register */
+#define FIO2_BOTH 					0xFFC0173C	/* Flag Set on Both Edges register */
+#define FIO2_INEN 					0xFFC01740	/* Flag Input Enable register */
+
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define SPORT0_TCR1     	 	0xFFC00800	/* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_TCR2      	 	0xFFC00804	/* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_TCLKDIV        		0xFFC00808	/* SPORT0 Transmit Clock Divider */
+#define SPORT0_TFSDIV          		0xFFC0080C	/* SPORT0 Transmit Frame Sync Divider */
+#define SPORT0_TX	             	0xFFC00810	/* SPORT0 TX Data Register */
+#define SPORT0_RX	            	0xFFC00818	/* SPORT0 RX Data Register */
+#define SPORT0_RCR1      	 		0xFFC00820	/* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_RCR2      	 		0xFFC00824	/* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_RCLKDIV        		0xFFC00828	/* SPORT0 Receive Clock Divider */
+#define SPORT0_RFSDIV          		0xFFC0082C	/* SPORT0 Receive Frame Sync Divider */
+#define SPORT0_STAT            		0xFFC00830	/* SPORT0 Status Register */
+#define SPORT0_CHNL            		0xFFC00834	/* SPORT0 Current Channel Register */
+#define SPORT0_MCMC1           		0xFFC00838	/* SPORT0 Multi-Channel Configuration Register 1 */
+#define SPORT0_MCMC2           		0xFFC0083C	/* SPORT0 Multi-Channel Configuration Register 2 */
+#define SPORT0_MTCS0           		0xFFC00840	/* SPORT0 Multi-Channel Transmit Select Register 0 */
+#define SPORT0_MTCS1           		0xFFC00844	/* SPORT0 Multi-Channel Transmit Select Register 1 */
+#define SPORT0_MTCS2           		0xFFC00848	/* SPORT0 Multi-Channel Transmit Select Register 2 */
+#define SPORT0_MTCS3           		0xFFC0084C	/* SPORT0 Multi-Channel Transmit Select Register 3 */
+#define SPORT0_MRCS0           		0xFFC00850	/* SPORT0 Multi-Channel Receive Select Register 0 */
+#define SPORT0_MRCS1           		0xFFC00854	/* SPORT0 Multi-Channel Receive Select Register 1 */
+#define SPORT0_MRCS2           		0xFFC00858	/* SPORT0 Multi-Channel Receive Select Register 2 */
+#define SPORT0_MRCS3           		0xFFC0085C	/* SPORT0 Multi-Channel Receive Select Register 3 */
+
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define SPORT1_TCR1     	 		0xFFC00900	/* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_TCR2      	 		0xFFC00904	/* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_TCLKDIV        		0xFFC00908	/* SPORT1 Transmit Clock Divider */
+#define SPORT1_TFSDIV          		0xFFC0090C	/* SPORT1 Transmit Frame Sync Divider */
+#define SPORT1_TX	             	0xFFC00910	/* SPORT1 TX Data Register */
+#define SPORT1_RX	            	0xFFC00918	/* SPORT1 RX Data Register */
+#define SPORT1_RCR1      	 		0xFFC00920	/* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_RCR2      	 		0xFFC00924	/* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_RCLKDIV        		0xFFC00928	/* SPORT1 Receive Clock Divider */
+#define SPORT1_RFSDIV          		0xFFC0092C	/* SPORT1 Receive Frame Sync Divider */
+#define SPORT1_STAT            		0xFFC00930	/* SPORT1 Status Register */
+#define SPORT1_CHNL            		0xFFC00934	/* SPORT1 Current Channel Register */
+#define SPORT1_MCMC1           		0xFFC00938	/* SPORT1 Multi-Channel Configuration Register 1 */
+#define SPORT1_MCMC2           		0xFFC0093C	/* SPORT1 Multi-Channel Configuration Register 2 */
+#define SPORT1_MTCS0           		0xFFC00940	/* SPORT1 Multi-Channel Transmit Select Register 0 */
+#define SPORT1_MTCS1           		0xFFC00944	/* SPORT1 Multi-Channel Transmit Select Register 1 */
+#define SPORT1_MTCS2           		0xFFC00948	/* SPORT1 Multi-Channel Transmit Select Register 2 */
+#define SPORT1_MTCS3           		0xFFC0094C	/* SPORT1 Multi-Channel Transmit Select Register 3 */
+#define SPORT1_MRCS0           		0xFFC00950	/* SPORT1 Multi-Channel Receive Select Register 0 */
+#define SPORT1_MRCS1           		0xFFC00954	/* SPORT1 Multi-Channel Receive Select Register 1 */
+#define SPORT1_MRCS2           		0xFFC00958	/* SPORT1 Multi-Channel Receive Select Register 2 */
+#define SPORT1_MRCS3           		0xFFC0095C	/* SPORT1 Multi-Channel Receive Select Register 3 */
+
+/* Asynchronous Memory Controller - External Bus Interface Unit  */
+#define EBIU_AMGCTL					0xFFC00A00	/* Asynchronous Memory Global Control Register */
+#define EBIU_AMBCTL0				0xFFC00A04	/* Asynchronous Memory Bank Control Register 0 */
+#define EBIU_AMBCTL1				0xFFC00A08	/* Asynchronous Memory Bank Control Register 1 */
+
+/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+#define EBIU_SDGCTL					0xFFC00A10	/* SDRAM Global Control Register */
+#define EBIU_SDBCTL					0xFFC00A14	/* SDRAM Bank Control Register */
+#define EBIU_SDRRC 					0xFFC00A18	/* SDRAM Refresh Rate Control Register */
+#define EBIU_SDSTAT					0xFFC00A1C	/* SDRAM Status Register */
+
+/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */
+#define PPI0_CONTROL 				0xFFC01000	/* PPI0 Control register */
+#define PPI0_STATUS 				0xFFC01004	/* PPI0 Status register */
+#define PPI0_COUNT 					0xFFC01008	/* PPI0 Transfer Count register */
+#define PPI0_DELAY 					0xFFC0100C	/* PPI0 Delay Count register */
+#define PPI0_FRAME 					0xFFC01010	/* PPI0 Frame Length register */
+
+/*Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */
+#define PPI1_CONTROL 				0xFFC01300	/* PPI1 Control register */
+#define PPI1_STATUS 				0xFFC01304	/* PPI1 Status register */
+#define PPI1_COUNT 					0xFFC01308	/* PPI1 Transfer Count register */
+#define PPI1_DELAY 					0xFFC0130C	/* PPI1 Delay Count register */
+#define PPI1_FRAME 					0xFFC01310	/* PPI1 Frame Length register */
+
+/*DMA traffic control registers */
+#define	DMAC0_TC_PER  0xFFC00B0C	/* Traffic control periods */
+#define	DMAC0_TC_CNT  0xFFC00B10	/* Traffic control current counts        */
+#define	DMAC1_TC_PER  0xFFC01B0C	/* Traffic control periods */
+#define	DMAC1_TC_CNT  0xFFC01B10	/* Traffic control current counts */
+
+/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */
+#define DMA1_0_CONFIG 0xFFC01C08	/* DMA1 Channel 0 Configuration register */
+#define DMA1_0_NEXT_DESC_PTR 0xFFC01C00	/* DMA1 Channel 0 Next Descripter Ptr Reg */
+#define DMA1_0_START_ADDR 0xFFC01C04	/* DMA1 Channel 0 Start Address */
+#define DMA1_0_X_COUNT 0xFFC01C10	/* DMA1 Channel 0 Inner Loop Count */
+#define DMA1_0_Y_COUNT 0xFFC01C18	/* DMA1 Channel 0 Outer Loop Count */
+#define DMA1_0_X_MODIFY 0xFFC01C14	/* DMA1 Channel 0 Inner Loop Addr Increment */
+#define DMA1_0_Y_MODIFY 0xFFC01C1C	/* DMA1 Channel 0 Outer Loop Addr Increment */
+#define DMA1_0_CURR_DESC_PTR 0xFFC01C20	/* DMA1 Channel 0 Current Descriptor Pointer */
+#define DMA1_0_CURR_ADDR 0xFFC01C24	/* DMA1 Channel 0 Current Address Pointer */
+#define DMA1_0_CURR_X_COUNT 0xFFC01C30	/* DMA1 Channel 0 Current Inner Loop Count */
+#define DMA1_0_CURR_Y_COUNT 0xFFC01C38	/* DMA1 Channel 0 Current Outer Loop Count */
+#define DMA1_0_IRQ_STATUS 0xFFC01C28	/* DMA1 Channel 0 Interrupt/Status Register */
+#define DMA1_0_PERIPHERAL_MAP 0xFFC01C2C	/* DMA1 Channel 0 Peripheral Map Register */
+
+#define DMA1_1_CONFIG 0xFFC01C48	/* DMA1 Channel 1 Configuration register */
+#define DMA1_1_NEXT_DESC_PTR 0xFFC01C40	/* DMA1 Channel 1 Next Descripter Ptr Reg */
+#define DMA1_1_START_ADDR 0xFFC01C44	/* DMA1 Channel 1 Start Address */
+#define DMA1_1_X_COUNT 0xFFC01C50	/* DMA1 Channel 1 Inner Loop Count */
+#define DMA1_1_Y_COUNT 0xFFC01C58	/* DMA1 Channel 1 Outer Loop Count */
+#define DMA1_1_X_MODIFY 0xFFC01C54	/* DMA1 Channel 1 Inner Loop Addr Increment */
+#define DMA1_1_Y_MODIFY 0xFFC01C5C	/* DMA1 Channel 1 Outer Loop Addr Increment */
+#define DMA1_1_CURR_DESC_PTR 0xFFC01C60	/* DMA1 Channel 1 Current Descriptor Pointer */
+#define DMA1_1_CURR_ADDR 0xFFC01C64	/* DMA1 Channel 1 Current Address Pointer */
+#define DMA1_1_CURR_X_COUNT 0xFFC01C70	/* DMA1 Channel 1 Current Inner Loop Count */
+#define DMA1_1_CURR_Y_COUNT 0xFFC01C78	/* DMA1 Channel 1 Current Outer Loop Count */
+#define DMA1_1_IRQ_STATUS 0xFFC01C68	/* DMA1 Channel 1 Interrupt/Status Register */
+#define DMA1_1_PERIPHERAL_MAP 0xFFC01C6C	/* DMA1 Channel 1 Peripheral Map Register */
+
+#define DMA1_2_CONFIG 0xFFC01C88	/* DMA1 Channel 2 Configuration register */
+#define DMA1_2_NEXT_DESC_PTR 0xFFC01C80	/* DMA1 Channel 2 Next Descripter Ptr Reg */
+#define DMA1_2_START_ADDR 0xFFC01C84	/* DMA1 Channel 2 Start Address */
+#define DMA1_2_X_COUNT 0xFFC01C90	/* DMA1 Channel 2 Inner Loop Count */
+#define DMA1_2_Y_COUNT 0xFFC01C98	/* DMA1 Channel 2 Outer Loop Count */
+#define DMA1_2_X_MODIFY 0xFFC01C94	/* DMA1 Channel 2 Inner Loop Addr Increment */
+#define DMA1_2_Y_MODIFY 0xFFC01C9C	/* DMA1 Channel 2 Outer Loop Addr Increment */
+#define DMA1_2_CURR_DESC_PTR 0xFFC01CA0	/* DMA1 Channel 2 Current Descriptor Pointer */
+#define DMA1_2_CURR_ADDR 0xFFC01CA4	/* DMA1 Channel 2 Current Address Pointer */
+#define DMA1_2_CURR_X_COUNT 0xFFC01CB0	/* DMA1 Channel 2 Current Inner Loop Count */
+#define DMA1_2_CURR_Y_COUNT 0xFFC01CB8	/* DMA1 Channel 2 Current Outer Loop Count */
+#define DMA1_2_IRQ_STATUS 0xFFC01CA8	/* DMA1 Channel 2 Interrupt/Status Register */
+#define DMA1_2_PERIPHERAL_MAP 0xFFC01CAC	/* DMA1 Channel 2 Peripheral Map Register */
+
+#define DMA1_3_CONFIG 0xFFC01CC8	/* DMA1 Channel 3 Configuration register */
+#define DMA1_3_NEXT_DESC_PTR 0xFFC01CC0	/* DMA1 Channel 3 Next Descripter Ptr Reg */
+#define DMA1_3_START_ADDR 0xFFC01CC4	/* DMA1 Channel 3 Start Address */
+#define DMA1_3_X_COUNT 0xFFC01CD0	/* DMA1 Channel 3 Inner Loop Count */
+#define DMA1_3_Y_COUNT 0xFFC01CD8	/* DMA1 Channel 3 Outer Loop Count */
+#define DMA1_3_X_MODIFY 0xFFC01CD4	/* DMA1 Channel 3 Inner Loop Addr Increment */
+#define DMA1_3_Y_MODIFY 0xFFC01CDC	/* DMA1 Channel 3 Outer Loop Addr Increment */
+#define DMA1_3_CURR_DESC_PTR 0xFFC01CE0	/* DMA1 Channel 3 Current Descriptor Pointer */
+#define DMA1_3_CURR_ADDR 0xFFC01CE4	/* DMA1 Channel 3 Current Address Pointer */
+#define DMA1_3_CURR_X_COUNT 0xFFC01CF0	/* DMA1 Channel 3 Current Inner Loop Count */
+#define DMA1_3_CURR_Y_COUNT 0xFFC01CF8	/* DMA1 Channel 3 Current Outer Loop Count */
+#define DMA1_3_IRQ_STATUS 0xFFC01CE8	/* DMA1 Channel 3 Interrupt/Status Register */
+#define DMA1_3_PERIPHERAL_MAP 0xFFC01CEC	/* DMA1 Channel 3 Peripheral Map Register */
+
+#define DMA1_4_CONFIG 0xFFC01D08	/* DMA1 Channel 4 Configuration register */
+#define DMA1_4_NEXT_DESC_PTR 0xFFC01D00	/* DMA1 Channel 4 Next Descripter Ptr Reg */
+#define DMA1_4_START_ADDR 0xFFC01D04	/* DMA1 Channel 4 Start Address */
+#define DMA1_4_X_COUNT 0xFFC01D10	/* DMA1 Channel 4 Inner Loop Count */
+#define DMA1_4_Y_COUNT 0xFFC01D18	/* DMA1 Channel 4 Outer Loop Count */
+#define DMA1_4_X_MODIFY 0xFFC01D14	/* DMA1 Channel 4 Inner Loop Addr Increment */
+#define DMA1_4_Y_MODIFY 0xFFC01D1C	/* DMA1 Channel 4 Outer Loop Addr Increment */
+#define DMA1_4_CURR_DESC_PTR 0xFFC01D20	/* DMA1 Channel 4 Current Descriptor Pointer */
+#define DMA1_4_CURR_ADDR 0xFFC01D24	/* DMA1 Channel 4 Current Address Pointer */
+#define DMA1_4_CURR_X_COUNT 0xFFC01D30	/* DMA1 Channel 4 Current Inner Loop Count */
+#define DMA1_4_CURR_Y_COUNT 0xFFC01D38	/* DMA1 Channel 4 Current Outer Loop Count */
+#define DMA1_4_IRQ_STATUS 0xFFC01D28	/* DMA1 Channel 4 Interrupt/Status Register */
+#define DMA1_4_PERIPHERAL_MAP 0xFFC01D2C	/* DMA1 Channel 4 Peripheral Map Register */
+
+#define DMA1_5_CONFIG 0xFFC01D48	/* DMA1 Channel 5 Configuration register */
+#define DMA1_5_NEXT_DESC_PTR 0xFFC01D40	/* DMA1 Channel 5 Next Descripter Ptr Reg */
+#define DMA1_5_START_ADDR 0xFFC01D44	/* DMA1 Channel 5 Start Address */
+#define DMA1_5_X_COUNT 0xFFC01D50	/* DMA1 Channel 5 Inner Loop Count */
+#define DMA1_5_Y_COUNT 0xFFC01D58	/* DMA1 Channel 5 Outer Loop Count */
+#define DMA1_5_X_MODIFY 0xFFC01D54	/* DMA1 Channel 5 Inner Loop Addr Increment */
+#define DMA1_5_Y_MODIFY 0xFFC01D5C	/* DMA1 Channel 5 Outer Loop Addr Increment */
+#define DMA1_5_CURR_DESC_PTR 0xFFC01D60	/* DMA1 Channel 5 Current Descriptor Pointer */
+#define DMA1_5_CURR_ADDR 0xFFC01D64	/* DMA1 Channel 5 Current Address Pointer */
+#define DMA1_5_CURR_X_COUNT 0xFFC01D70	/* DMA1 Channel 5 Current Inner Loop Count */
+#define DMA1_5_CURR_Y_COUNT 0xFFC01D78	/* DMA1 Channel 5 Current Outer Loop Count */
+#define DMA1_5_IRQ_STATUS 0xFFC01D68	/* DMA1 Channel 5 Interrupt/Status Register */
+#define DMA1_5_PERIPHERAL_MAP 0xFFC01D6C	/* DMA1 Channel 5 Peripheral Map Register */
+
+#define DMA1_6_CONFIG 0xFFC01D88	/* DMA1 Channel 6 Configuration register */
+#define DMA1_6_NEXT_DESC_PTR 0xFFC01D80	/* DMA1 Channel 6 Next Descripter Ptr Reg */
+#define DMA1_6_START_ADDR 0xFFC01D84	/* DMA1 Channel 6 Start Address */
+#define DMA1_6_X_COUNT 0xFFC01D90	/* DMA1 Channel 6 Inner Loop Count */
+#define DMA1_6_Y_COUNT 0xFFC01D98	/* DMA1 Channel 6 Outer Loop Count */
+#define DMA1_6_X_MODIFY 0xFFC01D94	/* DMA1 Channel 6 Inner Loop Addr Increment */
+#define DMA1_6_Y_MODIFY 0xFFC01D9C	/* DMA1 Channel 6 Outer Loop Addr Increment */
+#define DMA1_6_CURR_DESC_PTR 0xFFC01DA0	/* DMA1 Channel 6 Current Descriptor Pointer */
+#define DMA1_6_CURR_ADDR 0xFFC01DA4	/* DMA1 Channel 6 Current Address Pointer */
+#define DMA1_6_CURR_X_COUNT 0xFFC01DB0	/* DMA1 Channel 6 Current Inner Loop Count */
+#define DMA1_6_CURR_Y_COUNT 0xFFC01DB8	/* DMA1 Channel 6 Current Outer Loop Count */
+#define DMA1_6_IRQ_STATUS 0xFFC01DA8	/* DMA1 Channel 6 Interrupt/Status Register */
+#define DMA1_6_PERIPHERAL_MAP 0xFFC01DAC	/* DMA1 Channel 6 Peripheral Map Register */
+
+#define DMA1_7_CONFIG 0xFFC01DC8	/* DMA1 Channel 7 Configuration register */
+#define DMA1_7_NEXT_DESC_PTR 0xFFC01DC0	/* DMA1 Channel 7 Next Descripter Ptr Reg */
+#define DMA1_7_START_ADDR 0xFFC01DC4	/* DMA1 Channel 7 Start Address */
+#define DMA1_7_X_COUNT 0xFFC01DD0	/* DMA1 Channel 7 Inner Loop Count */
+#define DMA1_7_Y_COUNT 0xFFC01DD8	/* DMA1 Channel 7 Outer Loop Count */
+#define DMA1_7_X_MODIFY 0xFFC01DD4	/* DMA1 Channel 7 Inner Loop Addr Increment */
+#define DMA1_7_Y_MODIFY 0xFFC01DDC	/* DMA1 Channel 7 Outer Loop Addr Increment */
+#define DMA1_7_CURR_DESC_PTR 0xFFC01DE0	/* DMA1 Channel 7 Current Descriptor Pointer */
+#define DMA1_7_CURR_ADDR 0xFFC01DE4	/* DMA1 Channel 7 Current Address Pointer */
+#define DMA1_7_CURR_X_COUNT 0xFFC01DF0	/* DMA1 Channel 7 Current Inner Loop Count */
+#define DMA1_7_CURR_Y_COUNT 0xFFC01DF8	/* DMA1 Channel 7 Current Outer Loop Count */
+#define DMA1_7_IRQ_STATUS 0xFFC01DE8	/* DMA1 Channel 7 Interrupt/Status Register */
+#define DMA1_7_PERIPHERAL_MAP 0xFFC01DEC	/* DMA1 Channel 7 Peripheral Map Register */
+
+#define DMA1_8_CONFIG 0xFFC01E08	/* DMA1 Channel 8 Configuration register */
+#define DMA1_8_NEXT_DESC_PTR 0xFFC01E00	/* DMA1 Channel 8 Next Descripter Ptr Reg */
+#define DMA1_8_START_ADDR 0xFFC01E04	/* DMA1 Channel 8 Start Address */
+#define DMA1_8_X_COUNT 0xFFC01E10	/* DMA1 Channel 8 Inner Loop Count */
+#define DMA1_8_Y_COUNT 0xFFC01E18	/* DMA1 Channel 8 Outer Loop Count */
+#define DMA1_8_X_MODIFY 0xFFC01E14	/* DMA1 Channel 8 Inner Loop Addr Increment */
+#define DMA1_8_Y_MODIFY 0xFFC01E1C	/* DMA1 Channel 8 Outer Loop Addr Increment */
+#define DMA1_8_CURR_DESC_PTR 0xFFC01E20	/* DMA1 Channel 8 Current Descriptor Pointer */
+#define DMA1_8_CURR_ADDR 0xFFC01E24	/* DMA1 Channel 8 Current Address Pointer */
+#define DMA1_8_CURR_X_COUNT 0xFFC01E30	/* DMA1 Channel 8 Current Inner Loop Count */
+#define DMA1_8_CURR_Y_COUNT 0xFFC01E38	/* DMA1 Channel 8 Current Outer Loop Count */
+#define DMA1_8_IRQ_STATUS 0xFFC01E28	/* DMA1 Channel 8 Interrupt/Status Register */
+#define DMA1_8_PERIPHERAL_MAP 0xFFC01E2C	/* DMA1 Channel 8 Peripheral Map Register */
+
+#define DMA1_9_CONFIG 0xFFC01E48	/* DMA1 Channel 9 Configuration register */
+#define DMA1_9_NEXT_DESC_PTR 0xFFC01E40	/* DMA1 Channel 9 Next Descripter Ptr Reg */
+#define DMA1_9_START_ADDR 0xFFC01E44	/* DMA1 Channel 9 Start Address */
+#define DMA1_9_X_COUNT 0xFFC01E50	/* DMA1 Channel 9 Inner Loop Count */
+#define DMA1_9_Y_COUNT 0xFFC01E58	/* DMA1 Channel 9 Outer Loop Count */
+#define DMA1_9_X_MODIFY 0xFFC01E54	/* DMA1 Channel 9 Inner Loop Addr Increment */
+#define DMA1_9_Y_MODIFY 0xFFC01E5C	/* DMA1 Channel 9 Outer Loop Addr Increment */
+#define DMA1_9_CURR_DESC_PTR 0xFFC01E60	/* DMA1 Channel 9 Current Descriptor Pointer */
+#define DMA1_9_CURR_ADDR 0xFFC01E64	/* DMA1 Channel 9 Current Address Pointer */
+#define DMA1_9_CURR_X_COUNT 0xFFC01E70	/* DMA1 Channel 9 Current Inner Loop Count */
+#define DMA1_9_CURR_Y_COUNT 0xFFC01E78	/* DMA1 Channel 9 Current Outer Loop Count */
+#define DMA1_9_IRQ_STATUS 0xFFC01E68	/* DMA1 Channel 9 Interrupt/Status Register */
+#define DMA1_9_PERIPHERAL_MAP 0xFFC01E6C	/* DMA1 Channel 9 Peripheral Map Register */
+
+#define DMA1_10_CONFIG 0xFFC01E88	/* DMA1 Channel 10 Configuration register */
+#define DMA1_10_NEXT_DESC_PTR 0xFFC01E80	/* DMA1 Channel 10 Next Descripter Ptr Reg */
+#define DMA1_10_START_ADDR 0xFFC01E84	/* DMA1 Channel 10 Start Address */
+#define DMA1_10_X_COUNT 0xFFC01E90	/* DMA1 Channel 10 Inner Loop Count */
+#define DMA1_10_Y_COUNT 0xFFC01E98	/* DMA1 Channel 10 Outer Loop Count */
+#define DMA1_10_X_MODIFY 0xFFC01E94	/* DMA1 Channel 10 Inner Loop Addr Increment */
+#define DMA1_10_Y_MODIFY 0xFFC01E9C	/* DMA1 Channel 10 Outer Loop Addr Increment */
+#define DMA1_10_CURR_DESC_PTR 0xFFC01EA0	/* DMA1 Channel 10 Current Descriptor Pointer */
+#define DMA1_10_CURR_ADDR 0xFFC01EA4	/* DMA1 Channel 10 Current Address Pointer */
+#define DMA1_10_CURR_X_COUNT 0xFFC01EB0	/* DMA1 Channel 10 Current Inner Loop Count */
+#define DMA1_10_CURR_Y_COUNT 0xFFC01EB8	/* DMA1 Channel 10 Current Outer Loop Count */
+#define DMA1_10_IRQ_STATUS 0xFFC01EA8	/* DMA1 Channel 10 Interrupt/Status Register */
+#define DMA1_10_PERIPHERAL_MAP 0xFFC01EAC	/* DMA1 Channel 10 Peripheral Map Register */
+
+#define DMA1_11_CONFIG 0xFFC01EC8	/* DMA1 Channel 11 Configuration register */
+#define DMA1_11_NEXT_DESC_PTR 0xFFC01EC0	/* DMA1 Channel 11 Next Descripter Ptr Reg */
+#define DMA1_11_START_ADDR 0xFFC01EC4	/* DMA1 Channel 11 Start Address */
+#define DMA1_11_X_COUNT 0xFFC01ED0	/* DMA1 Channel 11 Inner Loop Count */
+#define DMA1_11_Y_COUNT 0xFFC01ED8	/* DMA1 Channel 11 Outer Loop Count */
+#define DMA1_11_X_MODIFY 0xFFC01ED4	/* DMA1 Channel 11 Inner Loop Addr Increment */
+#define DMA1_11_Y_MODIFY 0xFFC01EDC	/* DMA1 Channel 11 Outer Loop Addr Increment */
+#define DMA1_11_CURR_DESC_PTR 0xFFC01EE0	/* DMA1 Channel 11 Current Descriptor Pointer */
+#define DMA1_11_CURR_ADDR 0xFFC01EE4	/* DMA1 Channel 11 Current Address Pointer */
+#define DMA1_11_CURR_X_COUNT 0xFFC01EF0	/* DMA1 Channel 11 Current Inner Loop Count */
+#define DMA1_11_CURR_Y_COUNT 0xFFC01EF8	/* DMA1 Channel 11 Current Outer Loop Count */
+#define DMA1_11_IRQ_STATUS 0xFFC01EE8	/* DMA1 Channel 11 Interrupt/Status Register */
+#define DMA1_11_PERIPHERAL_MAP 0xFFC01EEC	/* DMA1 Channel 11 Peripheral Map Register */
+
+/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */
+#define MDMA_D0_CONFIG 0xFFC01F08	/*MemDMA1 Stream 0 Destination Configuration */
+#define MDMA_D0_NEXT_DESC_PTR 0xFFC01F00	/*MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */
+#define MDMA_D0_START_ADDR 0xFFC01F04	/*MemDMA1 Stream 0 Destination Start Address */
+#define MDMA_D0_X_COUNT 0xFFC01F10	/*MemDMA1 Stream 0 Destination Inner-Loop Count */
+#define MDMA_D0_Y_COUNT 0xFFC01F18	/*MemDMA1 Stream 0 Destination Outer-Loop Count */
+#define MDMA_D0_X_MODIFY 0xFFC01F14	/*MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */
+#define MDMA_D0_Y_MODIFY 0xFFC01F1C	/*MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */
+#define MDMA_D0_CURR_DESC_PTR 0xFFC01F20	/*MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */
+#define MDMA_D0_CURR_ADDR 0xFFC01F24	/*MemDMA1 Stream 0 Destination Current Address */
+#define MDMA_D0_CURR_X_COUNT 0xFFC01F30	/*MemDMA1 Stream 0 Dest Current Inner-Loop Count */
+#define MDMA_D0_CURR_Y_COUNT 0xFFC01F38	/*MemDMA1 Stream 0 Dest Current Outer-Loop Count */
+#define MDMA_D0_IRQ_STATUS 0xFFC01F28	/*MemDMA1 Stream 0 Destination Interrupt/Status */
+#define MDMA_D0_PERIPHERAL_MAP 0xFFC01F2C	/*MemDMA1 Stream 0 Destination Peripheral Map */
+
+#define MDMA_S0_CONFIG 0xFFC01F48	/*MemDMA1 Stream 0 Source Configuration */
+#define MDMA_S0_NEXT_DESC_PTR 0xFFC01F40	/*MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */
+#define MDMA_S0_START_ADDR 0xFFC01F44	/*MemDMA1 Stream 0 Source Start Address */
+#define MDMA_S0_X_COUNT 0xFFC01F50	/*MemDMA1 Stream 0 Source Inner-Loop Count */
+#define MDMA_S0_Y_COUNT 0xFFC01F58	/*MemDMA1 Stream 0 Source Outer-Loop Count */
+#define MDMA_S0_X_MODIFY 0xFFC01F54	/*MemDMA1 Stream 0 Source Inner-Loop Address-Increment */
+#define MDMA_S0_Y_MODIFY 0xFFC01F5C	/*MemDMA1 Stream 0 Source Outer-Loop Address-Increment */
+#define MDMA_S0_CURR_DESC_PTR 0xFFC01F60	/*MemDMA1 Stream 0 Source Current Descriptor Ptr reg */
+#define MDMA_S0_CURR_ADDR 0xFFC01F64	/*MemDMA1 Stream 0 Source Current Address */
+#define MDMA_S0_CURR_X_COUNT 0xFFC01F70	/*MemDMA1 Stream 0 Source Current Inner-Loop Count */
+#define MDMA_S0_CURR_Y_COUNT 0xFFC01F78	/*MemDMA1 Stream 0 Source Current Outer-Loop Count */
+#define MDMA_S0_IRQ_STATUS 0xFFC01F68	/*MemDMA1 Stream 0 Source Interrupt/Status */
+#define MDMA_S0_PERIPHERAL_MAP 0xFFC01F6C	/*MemDMA1 Stream 0 Source Peripheral Map */
+
+#define MDMA_D1_CONFIG 0xFFC01F88	/*MemDMA1 Stream 1 Destination Configuration */
+#define MDMA_D1_NEXT_DESC_PTR 0xFFC01F80	/*MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */
+#define MDMA_D1_START_ADDR 0xFFC01F84	/*MemDMA1 Stream 1 Destination Start Address */
+#define MDMA_D1_X_COUNT 0xFFC01F90	/*MemDMA1 Stream 1 Destination Inner-Loop Count */
+#define MDMA_D1_Y_COUNT 0xFFC01F98	/*MemDMA1 Stream 1 Destination Outer-Loop Count */
+#define MDMA_D1_X_MODIFY 0xFFC01F94	/*MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */
+#define MDMA_D1_Y_MODIFY 0xFFC01F9C	/*MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */
+#define MDMA_D1_CURR_DESC_PTR 0xFFC01FA0	/*MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */
+#define MDMA_D1_CURR_ADDR 0xFFC01FA4	/*MemDMA1 Stream 1 Dest Current Address */
+#define MDMA_D1_CURR_X_COUNT 0xFFC01FB0	/*MemDMA1 Stream 1 Dest Current Inner-Loop Count */
+#define MDMA_D1_CURR_Y_COUNT 0xFFC01FB8	/*MemDMA1 Stream 1 Dest Current Outer-Loop Count */
+#define MDMA_D1_IRQ_STATUS 0xFFC01FA8	/*MemDMA1 Stream 1 Dest Interrupt/Status */
+#define MDMA_D1_PERIPHERAL_MAP 0xFFC01FAC	/*MemDMA1 Stream 1 Dest Peripheral Map */
+
+#define MDMA_S1_CONFIG 0xFFC01FC8	/*MemDMA1 Stream 1 Source Configuration */
+#define MDMA_S1_NEXT_DESC_PTR 0xFFC01FC0	/*MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */
+#define MDMA_S1_START_ADDR 0xFFC01FC4	/*MemDMA1 Stream 1 Source Start Address */
+#define MDMA_S1_X_COUNT 0xFFC01FD0	/*MemDMA1 Stream 1 Source Inner-Loop Count */
+#define MDMA_S1_Y_COUNT 0xFFC01FD8	/*MemDMA1 Stream 1 Source Outer-Loop Count */
+#define MDMA_S1_X_MODIFY 0xFFC01FD4	/*MemDMA1 Stream 1 Source Inner-Loop Address-Increment */
+#define MDMA_S1_Y_MODIFY 0xFFC01FDC	/*MemDMA1 Stream 1 Source Outer-Loop Address-Increment */
+#define MDMA_S1_CURR_DESC_PTR 0xFFC01FE0	/*MemDMA1 Stream 1 Source Current Descriptor Ptr reg */
+#define MDMA_S1_CURR_ADDR 0xFFC01FE4	/*MemDMA1 Stream 1 Source Current Address */
+#define MDMA_S1_CURR_X_COUNT 0xFFC01FF0	/*MemDMA1 Stream 1 Source Current Inner-Loop Count */
+#define MDMA_S1_CURR_Y_COUNT 0xFFC01FF8	/*MemDMA1 Stream 1 Source Current Outer-Loop Count */
+#define MDMA_S1_IRQ_STATUS 0xFFC01FE8	/*MemDMA1 Stream 1 Source Interrupt/Status */
+#define MDMA_S1_PERIPHERAL_MAP 0xFFC01FEC	/*MemDMA1 Stream 1 Source Peripheral Map */
+
+/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */
+#define DMA2_0_CONFIG 0xFFC00C08	/* DMA2 Channel 0 Configuration register */
+#define DMA2_0_NEXT_DESC_PTR 0xFFC00C00	/* DMA2 Channel 0 Next Descripter Ptr Reg */
+#define DMA2_0_START_ADDR 0xFFC00C04	/* DMA2 Channel 0 Start Address */
+#define DMA2_0_X_COUNT 0xFFC00C10	/* DMA2 Channel 0 Inner Loop Count */
+#define DMA2_0_Y_COUNT 0xFFC00C18	/* DMA2 Channel 0 Outer Loop Count */
+#define DMA2_0_X_MODIFY 0xFFC00C14	/* DMA2 Channel 0 Inner Loop Addr Increment */
+#define DMA2_0_Y_MODIFY 0xFFC00C1C	/* DMA2 Channel 0 Outer Loop Addr Increment */
+#define DMA2_0_CURR_DESC_PTR 0xFFC00C20	/* DMA2 Channel 0 Current Descriptor Pointer */
+#define DMA2_0_CURR_ADDR 0xFFC00C24	/* DMA2 Channel 0 Current Address Pointer */
+#define DMA2_0_CURR_X_COUNT 0xFFC00C30	/* DMA2 Channel 0 Current Inner Loop Count */
+#define DMA2_0_CURR_Y_COUNT 0xFFC00C38	/* DMA2 Channel 0 Current Outer Loop Count */
+#define DMA2_0_IRQ_STATUS 0xFFC00C28	/* DMA2 Channel 0 Interrupt/Status Register */
+#define DMA2_0_PERIPHERAL_MAP 0xFFC00C2C	/* DMA2 Channel 0 Peripheral Map Register */
+
+#define DMA2_1_CONFIG 0xFFC00C48	/* DMA2 Channel 1 Configuration register */
+#define DMA2_1_NEXT_DESC_PTR 0xFFC00C40	/* DMA2 Channel 1 Next Descripter Ptr Reg */
+#define DMA2_1_START_ADDR 0xFFC00C44	/* DMA2 Channel 1 Start Address */
+#define DMA2_1_X_COUNT 0xFFC00C50	/* DMA2 Channel 1 Inner Loop Count */
+#define DMA2_1_Y_COUNT 0xFFC00C58	/* DMA2 Channel 1 Outer Loop Count */
+#define DMA2_1_X_MODIFY 0xFFC00C54	/* DMA2 Channel 1 Inner Loop Addr Increment */
+#define DMA2_1_Y_MODIFY 0xFFC00C5C	/* DMA2 Channel 1 Outer Loop Addr Increment */
+#define DMA2_1_CURR_DESC_PTR 0xFFC00C60	/* DMA2 Channel 1 Current Descriptor Pointer */
+#define DMA2_1_CURR_ADDR 0xFFC00C64	/* DMA2 Channel 1 Current Address Pointer */
+#define DMA2_1_CURR_X_COUNT 0xFFC00C70	/* DMA2 Channel 1 Current Inner Loop Count */
+#define DMA2_1_CURR_Y_COUNT 0xFFC00C78	/* DMA2 Channel 1 Current Outer Loop Count */
+#define DMA2_1_IRQ_STATUS 0xFFC00C68	/* DMA2 Channel 1 Interrupt/Status Register */
+#define DMA2_1_PERIPHERAL_MAP 0xFFC00C6C	/* DMA2 Channel 1 Peripheral Map Register */
+
+#define DMA2_2_CONFIG 0xFFC00C88	/* DMA2 Channel 2 Configuration register */
+#define DMA2_2_NEXT_DESC_PTR 0xFFC00C80	/* DMA2 Channel 2 Next Descripter Ptr Reg */
+#define DMA2_2_START_ADDR 0xFFC00C84	/* DMA2 Channel 2 Start Address */
+#define DMA2_2_X_COUNT 0xFFC00C90	/* DMA2 Channel 2 Inner Loop Count */
+#define DMA2_2_Y_COUNT 0xFFC00C98	/* DMA2 Channel 2 Outer Loop Count */
+#define DMA2_2_X_MODIFY 0xFFC00C94	/* DMA2 Channel 2 Inner Loop Addr Increment */
+#define DMA2_2_Y_MODIFY 0xFFC00C9C	/* DMA2 Channel 2 Outer Loop Addr Increment */
+#define DMA2_2_CURR_DESC_PTR 0xFFC00CA0	/* DMA2 Channel 2 Current Descriptor Pointer */
+#define DMA2_2_CURR_ADDR 0xFFC00CA4	/* DMA2 Channel 2 Current Address Pointer */
+#define DMA2_2_CURR_X_COUNT 0xFFC00CB0	/* DMA2 Channel 2 Current Inner Loop Count */
+#define DMA2_2_CURR_Y_COUNT 0xFFC00CB8	/* DMA2 Channel 2 Current Outer Loop Count */
+#define DMA2_2_IRQ_STATUS 0xFFC00CA8	/* DMA2 Channel 2 Interrupt/Status Register */
+#define DMA2_2_PERIPHERAL_MAP 0xFFC00CAC	/* DMA2 Channel 2 Peripheral Map Register */
+
+#define DMA2_3_CONFIG 0xFFC00CC8	/* DMA2 Channel 3 Configuration register */
+#define DMA2_3_NEXT_DESC_PTR 0xFFC00CC0	/* DMA2 Channel 3 Next Descripter Ptr Reg */
+#define DMA2_3_START_ADDR 0xFFC00CC4	/* DMA2 Channel 3 Start Address */
+#define DMA2_3_X_COUNT 0xFFC00CD0	/* DMA2 Channel 3 Inner Loop Count */
+#define DMA2_3_Y_COUNT 0xFFC00CD8	/* DMA2 Channel 3 Outer Loop Count */
+#define DMA2_3_X_MODIFY 0xFFC00CD4	/* DMA2 Channel 3 Inner Loop Addr Increment */
+#define DMA2_3_Y_MODIFY 0xFFC00CDC	/* DMA2 Channel 3 Outer Loop Addr Increment */
+#define DMA2_3_CURR_DESC_PTR 0xFFC00CE0	/* DMA2 Channel 3 Current Descriptor Pointer */
+#define DMA2_3_CURR_ADDR 0xFFC00CE4	/* DMA2 Channel 3 Current Address Pointer */
+#define DMA2_3_CURR_X_COUNT 0xFFC00CF0	/* DMA2 Channel 3 Current Inner Loop Count */
+#define DMA2_3_CURR_Y_COUNT 0xFFC00CF8	/* DMA2 Channel 3 Current Outer Loop Count */
+#define DMA2_3_IRQ_STATUS 0xFFC00CE8	/* DMA2 Channel 3 Interrupt/Status Register */
+#define DMA2_3_PERIPHERAL_MAP 0xFFC00CEC	/* DMA2 Channel 3 Peripheral Map Register */
+
+#define DMA2_4_CONFIG 0xFFC00D08	/* DMA2 Channel 4 Configuration register */
+#define DMA2_4_NEXT_DESC_PTR 0xFFC00D00	/* DMA2 Channel 4 Next Descripter Ptr Reg */
+#define DMA2_4_START_ADDR 0xFFC00D04	/* DMA2 Channel 4 Start Address */
+#define DMA2_4_X_COUNT 0xFFC00D10	/* DMA2 Channel 4 Inner Loop Count */
+#define DMA2_4_Y_COUNT 0xFFC00D18	/* DMA2 Channel 4 Outer Loop Count */
+#define DMA2_4_X_MODIFY 0xFFC00D14	/* DMA2 Channel 4 Inner Loop Addr Increment */
+#define DMA2_4_Y_MODIFY 0xFFC00D1C	/* DMA2 Channel 4 Outer Loop Addr Increment */
+#define DMA2_4_CURR_DESC_PTR 0xFFC00D20	/* DMA2 Channel 4 Current Descriptor Pointer */
+#define DMA2_4_CURR_ADDR 0xFFC00D24	/* DMA2 Channel 4 Current Address Pointer */
+#define DMA2_4_CURR_X_COUNT 0xFFC00D30	/* DMA2 Channel 4 Current Inner Loop Count */
+#define DMA2_4_CURR_Y_COUNT 0xFFC00D38	/* DMA2 Channel 4 Current Outer Loop Count */
+#define DMA2_4_IRQ_STATUS 0xFFC00D28	/* DMA2 Channel 4 Interrupt/Status Register */
+#define DMA2_4_PERIPHERAL_MAP 0xFFC00D2C	/* DMA2 Channel 4 Peripheral Map Register */
+
+#define DMA2_5_CONFIG 0xFFC00D48	/* DMA2 Channel 5 Configuration register */
+#define DMA2_5_NEXT_DESC_PTR 0xFFC00D40	/* DMA2 Channel 5 Next Descripter Ptr Reg */
+#define DMA2_5_START_ADDR 0xFFC00D44	/* DMA2 Channel 5 Start Address */
+#define DMA2_5_X_COUNT 0xFFC00D50	/* DMA2 Channel 5 Inner Loop Count */
+#define DMA2_5_Y_COUNT 0xFFC00D58	/* DMA2 Channel 5 Outer Loop Count */
+#define DMA2_5_X_MODIFY 0xFFC00D54	/* DMA2 Channel 5 Inner Loop Addr Increment */
+#define DMA2_5_Y_MODIFY 0xFFC00D5C	/* DMA2 Channel 5 Outer Loop Addr Increment */
+#define DMA2_5_CURR_DESC_PTR 0xFFC00D60	/* DMA2 Channel 5 Current Descriptor Pointer */
+#define DMA2_5_CURR_ADDR 0xFFC00D64	/* DMA2 Channel 5 Current Address Pointer */
+#define DMA2_5_CURR_X_COUNT 0xFFC00D70	/* DMA2 Channel 5 Current Inner Loop Count */
+#define DMA2_5_CURR_Y_COUNT 0xFFC00D78	/* DMA2 Channel 5 Current Outer Loop Count */
+#define DMA2_5_IRQ_STATUS 0xFFC00D68	/* DMA2 Channel 5 Interrupt/Status Register */
+#define DMA2_5_PERIPHERAL_MAP 0xFFC00D6C	/* DMA2 Channel 5 Peripheral Map Register */
+
+#define DMA2_6_CONFIG 0xFFC00D88	/* DMA2 Channel 6 Configuration register */
+#define DMA2_6_NEXT_DESC_PTR 0xFFC00D80	/* DMA2 Channel 6 Next Descripter Ptr Reg */
+#define DMA2_6_START_ADDR 0xFFC00D84	/* DMA2 Channel 6 Start Address */
+#define DMA2_6_X_COUNT 0xFFC00D90	/* DMA2 Channel 6 Inner Loop Count */
+#define DMA2_6_Y_COUNT 0xFFC00D98	/* DMA2 Channel 6 Outer Loop Count */
+#define DMA2_6_X_MODIFY 0xFFC00D94	/* DMA2 Channel 6 Inner Loop Addr Increment */
+#define DMA2_6_Y_MODIFY 0xFFC00D9C	/* DMA2 Channel 6 Outer Loop Addr Increment */
+#define DMA2_6_CURR_DESC_PTR 0xFFC00DA0	/* DMA2 Channel 6 Current Descriptor Pointer */
+#define DMA2_6_CURR_ADDR 0xFFC00DA4	/* DMA2 Channel 6 Current Address Pointer */
+#define DMA2_6_CURR_X_COUNT 0xFFC00DB0	/* DMA2 Channel 6 Current Inner Loop Count */
+#define DMA2_6_CURR_Y_COUNT 0xFFC00DB8	/* DMA2 Channel 6 Current Outer Loop Count */
+#define DMA2_6_IRQ_STATUS 0xFFC00DA8	/* DMA2 Channel 6 Interrupt/Status Register */
+#define DMA2_6_PERIPHERAL_MAP 0xFFC00DAC	/* DMA2 Channel 6 Peripheral Map Register */
+
+#define DMA2_7_CONFIG 0xFFC00DC8	/* DMA2 Channel 7 Configuration register */
+#define DMA2_7_NEXT_DESC_PTR 0xFFC00DC0	/* DMA2 Channel 7 Next Descripter Ptr Reg */
+#define DMA2_7_START_ADDR 0xFFC00DC4	/* DMA2 Channel 7 Start Address */
+#define DMA2_7_X_COUNT 0xFFC00DD0	/* DMA2 Channel 7 Inner Loop Count */
+#define DMA2_7_Y_COUNT 0xFFC00DD8	/* DMA2 Channel 7 Outer Loop Count */
+#define DMA2_7_X_MODIFY 0xFFC00DD4	/* DMA2 Channel 7 Inner Loop Addr Increment */
+#define DMA2_7_Y_MODIFY 0xFFC00DDC	/* DMA2 Channel 7 Outer Loop Addr Increment */
+#define DMA2_7_CURR_DESC_PTR 0xFFC00DE0	/* DMA2 Channel 7 Current Descriptor Pointer */
+#define DMA2_7_CURR_ADDR 0xFFC00DE4	/* DMA2 Channel 7 Current Address Pointer */
+#define DMA2_7_CURR_X_COUNT 0xFFC00DF0	/* DMA2 Channel 7 Current Inner Loop Count */
+#define DMA2_7_CURR_Y_COUNT 0xFFC00DF8	/* DMA2 Channel 7 Current Outer Loop Count */
+#define DMA2_7_IRQ_STATUS 0xFFC00DE8	/* DMA2 Channel 7 Interrupt/Status Register */
+#define DMA2_7_PERIPHERAL_MAP 0xFFC00DEC	/* DMA2 Channel 7 Peripheral Map Register */
+
+#define DMA2_8_CONFIG 0xFFC00E08	/* DMA2 Channel 8 Configuration register */
+#define DMA2_8_NEXT_DESC_PTR 0xFFC00E00	/* DMA2 Channel 8 Next Descripter Ptr Reg */
+#define DMA2_8_START_ADDR 0xFFC00E04	/* DMA2 Channel 8 Start Address */
+#define DMA2_8_X_COUNT 0xFFC00E10	/* DMA2 Channel 8 Inner Loop Count */
+#define DMA2_8_Y_COUNT 0xFFC00E18	/* DMA2 Channel 8 Outer Loop Count */
+#define DMA2_8_X_MODIFY 0xFFC00E14	/* DMA2 Channel 8 Inner Loop Addr Increment */
+#define DMA2_8_Y_MODIFY 0xFFC00E1C	/* DMA2 Channel 8 Outer Loop Addr Increment */
+#define DMA2_8_CURR_DESC_PTR 0xFFC00E20	/* DMA2 Channel 8 Current Descriptor Pointer */
+#define DMA2_8_CURR_ADDR 0xFFC00E24	/* DMA2 Channel 8 Current Address Pointer */
+#define DMA2_8_CURR_X_COUNT 0xFFC00E30	/* DMA2 Channel 8 Current Inner Loop Count */
+#define DMA2_8_CURR_Y_COUNT 0xFFC00E38	/* DMA2 Channel 8 Current Outer Loop Count */
+#define DMA2_8_IRQ_STATUS 0xFFC00E28	/* DMA2 Channel 8 Interrupt/Status Register */
+#define DMA2_8_PERIPHERAL_MAP 0xFFC00E2C	/* DMA2 Channel 8 Peripheral Map Register */
+
+#define DMA2_9_CONFIG 0xFFC00E48	/* DMA2 Channel 9 Configuration register */
+#define DMA2_9_NEXT_DESC_PTR 0xFFC00E40	/* DMA2 Channel 9 Next Descripter Ptr Reg */
+#define DMA2_9_START_ADDR 0xFFC00E44	/* DMA2 Channel 9 Start Address */
+#define DMA2_9_X_COUNT 0xFFC00E50	/* DMA2 Channel 9 Inner Loop Count */
+#define DMA2_9_Y_COUNT 0xFFC00E58	/* DMA2 Channel 9 Outer Loop Count */
+#define DMA2_9_X_MODIFY 0xFFC00E54	/* DMA2 Channel 9 Inner Loop Addr Increment */
+#define DMA2_9_Y_MODIFY 0xFFC00E5C	/* DMA2 Channel 9 Outer Loop Addr Increment */
+#define DMA2_9_CURR_DESC_PTR 0xFFC00E60	/* DMA2 Channel 9 Current Descriptor Pointer */
+#define DMA2_9_CURR_ADDR 0xFFC00E64	/* DMA2 Channel 9 Current Address Pointer */
+#define DMA2_9_CURR_X_COUNT 0xFFC00E70	/* DMA2 Channel 9 Current Inner Loop Count */
+#define DMA2_9_CURR_Y_COUNT 0xFFC00E78	/* DMA2 Channel 9 Current Outer Loop Count */
+#define DMA2_9_IRQ_STATUS 0xFFC00E68	/* DMA2 Channel 9 Interrupt/Status Register */
+#define DMA2_9_PERIPHERAL_MAP 0xFFC00E6C	/* DMA2 Channel 9 Peripheral Map Register */
+
+#define DMA2_10_CONFIG 0xFFC00E88	/* DMA2 Channel 10 Configuration register */
+#define DMA2_10_NEXT_DESC_PTR 0xFFC00E80	/* DMA2 Channel 10 Next Descripter Ptr Reg */
+#define DMA2_10_START_ADDR 0xFFC00E84	/* DMA2 Channel 10 Start Address */
+#define DMA2_10_X_COUNT 0xFFC00E90	/* DMA2 Channel 10 Inner Loop Count */
+#define DMA2_10_Y_COUNT 0xFFC00E98	/* DMA2 Channel 10 Outer Loop Count */
+#define DMA2_10_X_MODIFY 0xFFC00E94	/* DMA2 Channel 10 Inner Loop Addr Increment */
+#define DMA2_10_Y_MODIFY 0xFFC00E9C	/* DMA2 Channel 10 Outer Loop Addr Increment */
+#define DMA2_10_CURR_DESC_PTR 0xFFC00EA0	/* DMA2 Channel 10 Current Descriptor Pointer */
+#define DMA2_10_CURR_ADDR 0xFFC00EA4	/* DMA2 Channel 10 Current Address Pointer */
+#define DMA2_10_CURR_X_COUNT 0xFFC00EB0	/* DMA2 Channel 10 Current Inner Loop Count */
+#define DMA2_10_CURR_Y_COUNT 0xFFC00EB8	/* DMA2 Channel 10 Current Outer Loop Count */
+#define DMA2_10_IRQ_STATUS 0xFFC00EA8	/* DMA2 Channel 10 Interrupt/Status Register */
+#define DMA2_10_PERIPHERAL_MAP 0xFFC00EAC	/* DMA2 Channel 10 Peripheral Map Register */
+
+#define DMA2_11_CONFIG 0xFFC00EC8	/* DMA2 Channel 11 Configuration register */
+#define DMA2_11_NEXT_DESC_PTR 0xFFC00EC0	/* DMA2 Channel 11 Next Descripter Ptr Reg */
+#define DMA2_11_START_ADDR 0xFFC00EC4	/* DMA2 Channel 11 Start Address */
+#define DMA2_11_X_COUNT 0xFFC00ED0	/* DMA2 Channel 11 Inner Loop Count */
+#define DMA2_11_Y_COUNT 0xFFC00ED8	/* DMA2 Channel 11 Outer Loop Count */
+#define DMA2_11_X_MODIFY 0xFFC00ED4	/* DMA2 Channel 11 Inner Loop Addr Increment */
+#define DMA2_11_Y_MODIFY 0xFFC00EDC	/* DMA2 Channel 11 Outer Loop Addr Increment */
+#define DMA2_11_CURR_DESC_PTR 0xFFC00EE0	/* DMA2 Channel 11 Current Descriptor Pointer */
+#define DMA2_11_CURR_ADDR 0xFFC00EE4	/* DMA2 Channel 11 Current Address Pointer */
+#define DMA2_11_CURR_X_COUNT 0xFFC00EF0	/* DMA2 Channel 11 Current Inner Loop Count */
+#define DMA2_11_CURR_Y_COUNT 0xFFC00EF8	/* DMA2 Channel 11 Current Outer Loop Count */
+#define DMA2_11_IRQ_STATUS 0xFFC00EE8	/* DMA2 Channel 11 Interrupt/Status Register */
+#define DMA2_11_PERIPHERAL_MAP 0xFFC00EEC	/* DMA2 Channel 11 Peripheral Map Register */
+
+/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */
+#define MDMA_D2_CONFIG 0xFFC00F08	/*MemDMA2 Stream 0 Destination Configuration register */
+#define MDMA_D2_NEXT_DESC_PTR 0xFFC00F00	/*MemDMA2 Stream 0 Destination Next Descriptor Ptr Reg */
+#define MDMA_D2_START_ADDR 0xFFC00F04	/*MemDMA2 Stream 0 Destination Start Address */
+#define MDMA_D2_X_COUNT 0xFFC00F10	/*MemDMA2 Stream 0 Dest Inner-Loop Count register */
+#define MDMA_D2_Y_COUNT 0xFFC00F18	/*MemDMA2 Stream 0 Dest Outer-Loop Count register */
+#define MDMA_D2_X_MODIFY 0xFFC00F14	/*MemDMA2 Stream 0 Dest Inner-Loop Address-Increment */
+#define MDMA_D2_Y_MODIFY 0xFFC00F1C	/*MemDMA2 Stream 0 Dest Outer-Loop Address-Increment */
+#define MDMA_D2_CURR_DESC_PTR 0xFFC00F20	/*MemDMA2 Stream 0 Dest Current Descriptor Ptr reg */
+#define MDMA_D2_CURR_ADDR 0xFFC00F24	/*MemDMA2 Stream 0 Destination Current Address */
+#define MDMA_D2_CURR_X_COUNT 0xFFC00F30	/*MemDMA2 Stream 0 Dest Current Inner-Loop Count reg */
+#define MDMA_D2_CURR_Y_COUNT 0xFFC00F38	/*MemDMA2 Stream 0 Dest Current Outer-Loop Count reg */
+#define MDMA_D2_IRQ_STATUS 0xFFC00F28	/*MemDMA2 Stream 0 Dest Interrupt/Status Register */
+#define MDMA_D2_PERIPHERAL_MAP 0xFFC00F2C	/*MemDMA2 Stream 0 Destination Peripheral Map register */
+
+#define MDMA_S2_CONFIG 0xFFC00F48	/*MemDMA2 Stream 0 Source Configuration register */
+#define MDMA_S2_NEXT_DESC_PTR 0xFFC00F40	/*MemDMA2 Stream 0 Source Next Descriptor Ptr Reg */
+#define MDMA_S2_START_ADDR 0xFFC00F44	/*MemDMA2 Stream 0 Source Start Address */
+#define MDMA_S2_X_COUNT 0xFFC00F50	/*MemDMA2 Stream 0 Source Inner-Loop Count register */
+#define MDMA_S2_Y_COUNT 0xFFC00F58	/*MemDMA2 Stream 0 Source Outer-Loop Count register */
+#define MDMA_S2_X_MODIFY 0xFFC00F54	/*MemDMA2 Stream 0 Src Inner-Loop Addr-Increment reg */
+#define MDMA_S2_Y_MODIFY 0xFFC00F5C	/*MemDMA2 Stream 0 Src Outer-Loop Addr-Increment reg */
+#define MDMA_S2_CURR_DESC_PTR 0xFFC00F60	/*MemDMA2 Stream 0 Source Current Descriptor Ptr reg */
+#define MDMA_S2_CURR_ADDR 0xFFC00F64	/*MemDMA2 Stream 0 Source Current Address */
+#define MDMA_S2_CURR_X_COUNT 0xFFC00F70	/*MemDMA2 Stream 0 Src Current Inner-Loop Count reg */
+#define MDMA_S2_CURR_Y_COUNT 0xFFC00F78	/*MemDMA2 Stream 0 Src Current Outer-Loop Count reg */
+#define MDMA_S2_IRQ_STATUS 0xFFC00F68	/*MemDMA2 Stream 0 Source Interrupt/Status Register */
+#define MDMA_S2_PERIPHERAL_MAP 0xFFC00F6C	/*MemDMA2 Stream 0 Source Peripheral Map register */
+
+#define MDMA_D3_CONFIG 0xFFC00F88	/*MemDMA2 Stream 1 Destination Configuration register */
+#define MDMA_D3_NEXT_DESC_PTR 0xFFC00F80	/*MemDMA2 Stream 1 Destination Next Descriptor Ptr Reg */
+#define MDMA_D3_START_ADDR 0xFFC00F84	/*MemDMA2 Stream 1 Destination Start Address */
+#define MDMA_D3_X_COUNT 0xFFC00F90	/*MemDMA2 Stream 1 Dest Inner-Loop Count register */
+#define MDMA_D3_Y_COUNT 0xFFC00F98	/*MemDMA2 Stream 1 Dest Outer-Loop Count register */
+#define MDMA_D3_X_MODIFY 0xFFC00F94	/*MemDMA2 Stream 1 Dest Inner-Loop Address-Increment */
+#define MDMA_D3_Y_MODIFY 0xFFC00F9C	/*MemDMA2 Stream 1 Dest Outer-Loop Address-Increment */
+#define MDMA_D3_CURR_DESC_PTR 0xFFC00FA0	/*MemDMA2 Stream 1 Destination Current Descriptor Ptr */
+#define MDMA_D3_CURR_ADDR 0xFFC00FA4	/*MemDMA2 Stream 1 Destination Current Address reg */
+#define MDMA_D3_CURR_X_COUNT 0xFFC00FB0	/*MemDMA2 Stream 1 Dest Current Inner-Loop Count reg */
+#define MDMA_D3_CURR_Y_COUNT 0xFFC00FB8	/*MemDMA2 Stream 1 Dest Current Outer-Loop Count reg */
+#define MDMA_D3_IRQ_STATUS 0xFFC00FA8	/*MemDMA2 Stream 1 Destination Interrupt/Status Reg */
+#define MDMA_D3_PERIPHERAL_MAP 0xFFC00FAC	/*MemDMA2 Stream 1 Destination Peripheral Map register */
+
+#define MDMA_S3_CONFIG 0xFFC00FC8	/*MemDMA2 Stream 1 Source Configuration register */
+#define MDMA_S3_NEXT_DESC_PTR 0xFFC00FC0	/*MemDMA2 Stream 1 Source Next Descriptor Ptr Reg */
+#define MDMA_S3_START_ADDR 0xFFC00FC4	/*MemDMA2 Stream 1 Source Start Address */
+#define MDMA_S3_X_COUNT 0xFFC00FD0	/*MemDMA2 Stream 1 Source Inner-Loop Count register */
+#define MDMA_S3_Y_COUNT 0xFFC00FD8	/*MemDMA2 Stream 1 Source Outer-Loop Count register */
+#define MDMA_S3_X_MODIFY 0xFFC00FD4	/*MemDMA2 Stream 1 Src Inner-Loop Address-Increment */
+#define MDMA_S3_Y_MODIFY 0xFFC00FDC	/*MemDMA2 Stream 1 Source Outer-Loop Address-Increment */
+#define MDMA_S3_CURR_DESC_PTR 0xFFC00FE0	/*MemDMA2 Stream 1 Source Current Descriptor Ptr reg */
+#define MDMA_S3_CURR_ADDR 0xFFC00FE4	/*MemDMA2 Stream 1 Source Current Address */
+#define MDMA_S3_CURR_X_COUNT 0xFFC00FF0	/*MemDMA2 Stream 1 Source Current Inner-Loop Count */
+#define MDMA_S3_CURR_Y_COUNT 0xFFC00FF8	/*MemDMA2 Stream 1 Source Current Outer-Loop Count */
+#define MDMA_S3_IRQ_STATUS 0xFFC00FE8	/*MemDMA2 Stream 1 Source Interrupt/Status Register */
+#define MDMA_S3_PERIPHERAL_MAP 0xFFC00FEC	/*MemDMA2 Stream 1 Source Peripheral Map register */
+
+/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */
+#define IMDMA_D0_CONFIG 0xFFC01808	/*IMDMA Stream 0 Destination Configuration */
+#define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800	/*IMDMA Stream 0 Destination Next Descriptor Ptr Reg */
+#define IMDMA_D0_START_ADDR 0xFFC01804	/*IMDMA Stream 0 Destination Start Address */
+#define IMDMA_D0_X_COUNT 0xFFC01810	/*IMDMA Stream 0 Destination Inner-Loop Count */
+#define IMDMA_D0_Y_COUNT 0xFFC01818	/*IMDMA Stream 0 Destination Outer-Loop Count */
+#define IMDMA_D0_X_MODIFY 0xFFC01814	/*IMDMA Stream 0 Dest Inner-Loop Address-Increment */
+#define IMDMA_D0_Y_MODIFY 0xFFC0181C	/*IMDMA Stream 0 Dest Outer-Loop Address-Increment */
+#define IMDMA_D0_CURR_DESC_PTR 0xFFC01820	/*IMDMA Stream 0 Destination Current Descriptor Ptr */
+#define IMDMA_D0_CURR_ADDR 0xFFC01824	/*IMDMA Stream 0 Destination Current Address */
+#define IMDMA_D0_CURR_X_COUNT 0xFFC01830	/*IMDMA Stream 0 Destination Current Inner-Loop Count */
+#define IMDMA_D0_CURR_Y_COUNT 0xFFC01838	/*IMDMA Stream 0 Destination Current Outer-Loop Count */
+#define IMDMA_D0_IRQ_STATUS 0xFFC01828	/*IMDMA Stream 0 Destination Interrupt/Status */
+
+#define IMDMA_S0_CONFIG 0xFFC01848	/*IMDMA Stream 0 Source Configuration */
+#define IMDMA_S0_NEXT_DESC_PTR 0xFFC01840	/*IMDMA Stream 0 Source Next Descriptor Ptr Reg */
+#define IMDMA_S0_START_ADDR 0xFFC01844	/*IMDMA Stream 0 Source Start Address */
+#define IMDMA_S0_X_COUNT 0xFFC01850	/*IMDMA Stream 0 Source Inner-Loop Count */
+#define IMDMA_S0_Y_COUNT 0xFFC01858	/*IMDMA Stream 0 Source Outer-Loop Count */
+#define IMDMA_S0_X_MODIFY 0xFFC01854	/*IMDMA Stream 0 Source Inner-Loop Address-Increment */
+#define IMDMA_S0_Y_MODIFY 0xFFC0185C	/*IMDMA Stream 0 Source Outer-Loop Address-Increment */
+#define IMDMA_S0_CURR_DESC_PTR 0xFFC01860	/*IMDMA Stream 0 Source Current Descriptor Ptr reg */
+#define IMDMA_S0_CURR_ADDR 0xFFC01864	/*IMDMA Stream 0 Source Current Address */
+#define IMDMA_S0_CURR_X_COUNT 0xFFC01870	/*IMDMA Stream 0 Source Current Inner-Loop Count */
+#define IMDMA_S0_CURR_Y_COUNT 0xFFC01878	/*IMDMA Stream 0 Source Current Outer-Loop Count */
+#define IMDMA_S0_IRQ_STATUS 0xFFC01868	/*IMDMA Stream 0 Source Interrupt/Status */
+
+#define IMDMA_D1_CONFIG 0xFFC01888	/*IMDMA Stream 1 Destination Configuration */
+#define IMDMA_D1_NEXT_DESC_PTR 0xFFC01880	/*IMDMA Stream 1 Destination Next Descriptor Ptr Reg */
+#define IMDMA_D1_START_ADDR 0xFFC01884	/*IMDMA Stream 1 Destination Start Address */
+#define IMDMA_D1_X_COUNT 0xFFC01890	/*IMDMA Stream 1 Destination Inner-Loop Count */
+#define IMDMA_D1_Y_COUNT 0xFFC01898	/*IMDMA Stream 1 Destination Outer-Loop Count */
+#define IMDMA_D1_X_MODIFY 0xFFC01894	/*IMDMA Stream 1 Dest Inner-Loop Address-Increment */
+#define IMDMA_D1_Y_MODIFY 0xFFC0189C	/*IMDMA Stream 1 Dest Outer-Loop Address-Increment */
+#define IMDMA_D1_CURR_DESC_PTR 0xFFC018A0	/*IMDMA Stream 1 Destination Current Descriptor Ptr */
+#define IMDMA_D1_CURR_ADDR 0xFFC018A4	/*IMDMA Stream 1 Destination Current Address */
+#define IMDMA_D1_CURR_X_COUNT 0xFFC018B0	/*IMDMA Stream 1 Destination Current Inner-Loop Count */
+#define IMDMA_D1_CURR_Y_COUNT 0xFFC018B8	/*IMDMA Stream 1 Destination Current Outer-Loop Count */
+#define IMDMA_D1_IRQ_STATUS 0xFFC018A8	/*IMDMA Stream 1 Destination Interrupt/Status */
+
+#define IMDMA_S1_CONFIG 0xFFC018C8	/*IMDMA Stream 1 Source Configuration */
+#define IMDMA_S1_NEXT_DESC_PTR 0xFFC018C0	/*IMDMA Stream 1 Source Next Descriptor Ptr Reg */
+#define IMDMA_S1_START_ADDR 0xFFC018C4	/*IMDMA Stream 1 Source Start Address */
+#define IMDMA_S1_X_COUNT 0xFFC018D0	/*IMDMA Stream 1 Source Inner-Loop Count */
+#define IMDMA_S1_Y_COUNT 0xFFC018D8	/*IMDMA Stream 1 Source Outer-Loop Count */
+#define IMDMA_S1_X_MODIFY 0xFFC018D4	/*IMDMA Stream 1 Source Inner-Loop Address-Increment */
+#define IMDMA_S1_Y_MODIFY 0xFFC018DC	/*IMDMA Stream 1 Source Outer-Loop Address-Increment */
+#define IMDMA_S1_CURR_DESC_PTR 0xFFC018E0	/*IMDMA Stream 1 Source Current Descriptor Ptr reg */
+#define IMDMA_S1_CURR_ADDR 0xFFC018E4	/*IMDMA Stream 1 Source Current Address */
+#define IMDMA_S1_CURR_X_COUNT 0xFFC018F0	/*IMDMA Stream 1 Source Current Inner-Loop Count */
+#define IMDMA_S1_CURR_Y_COUNT 0xFFC018F8	/*IMDMA Stream 1 Source Current Outer-Loop Count */
+#define IMDMA_S1_IRQ_STATUS 0xFFC018E8	/*IMDMA Stream 1 Source Interrupt/Status */
+
+/*********************************************************************************** */
+/* System MMR Register Bits */
+/******************************************************************************* */
+
+/* CHIPID Masks */
+#define CHIPID_VERSION         0xF0000000
+#define CHIPID_FAMILY          0x0FFFF000
+#define CHIPID_MANUFACTURE     0x00000FFE
+
+/* SICA_SYSCR Masks */
+#define COREB_SRAM_INIT		0x0020
+
+/* SWRST Mask */
+#define SYSTEM_RESET           0x0007	/* Initiates a system software reset */
+#define DOUBLE_FAULT_A         0x0008	/* Core A Double Fault Causes Reset */
+#define DOUBLE_FAULT_B         0x0010	/* Core B Double Fault Causes Reset */
+#define SWRST_DBL_FAULT_A      0x0800	/* SWRST Core A Double Fault */
+#define SWRST_DBL_FAULT_B      0x1000	/* SWRST Core B Double Fault */
+#define SWRST_WDT_B		       0x2000	/* SWRST Watchdog B */
+#define SWRST_WDT_A		       0x4000	/* SWRST Watchdog A */
+#define SWRST_OCCURRED         0x8000	/* SWRST Status */
+
+/* *************  SYSTEM INTERRUPT CONTROLLER MASKS ***************** */
+
+/* SICu_IARv Masks	 */
+/* u = A or B */
+/* v = 0 to 7 */
+/* w = 0 or 1 */
+
+/* Per_number = 0 to 63 */
+/* IVG_number = 7 to 15   */
+#define Peripheral_IVG(Per_number, IVG_number)    \
+    ((IVG_number) - 7) << (((Per_number) % 8) * 4)	/* Peripheral #Per_number assigned IVG #IVG_number  */
+    /* Usage: r0.l = lo(Peripheral_IVG(62, 10)); */
+    /*        r0.h = hi(Peripheral_IVG(62, 10)); */
+
+/* SICx_IMASKw Masks */
+/* masks are 32 bit wide, so two writes reguired for "64 bit" wide registers  */
+#define SIC_UNMASK_ALL         0x00000000	/* Unmask all peripheral interrupts */
+#define SIC_MASK_ALL           0xFFFFFFFF	/* Mask all peripheral interrupts */
+#define SIC_MASK(x)	       (1 << (x))	/* Mask Peripheral #x interrupt */
+#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x)))	/* Unmask Peripheral #x interrupt */
+
+/* SIC_IWR Masks */
+#define IWR_DISABLE_ALL        0x00000000	/* Wakeup Disable all peripherals */
+#define IWR_ENABLE_ALL         0xFFFFFFFF	/* Wakeup Enable all peripherals */
+/* x = pos 0 to 31, for 32-63 use value-32 */
+#define IWR_ENABLE(x)	       (1 << (x))	/* Wakeup Enable Peripheral #x */
+#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x)))	/* Wakeup Disable Peripheral #x */
+
+/*  *********  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS ****************   */
+
+/*  PPI_CONTROL Masks         */
+#define PORT_EN              0x00000001	/* PPI Port Enable  */
+#define PORT_DIR             0x00000002	/* PPI Port Direction       */
+#define XFR_TYPE             0x0000000C	/* PPI Transfer Type  */
+#define PORT_CFG             0x00000030	/* PPI Port Configuration */
+#define FLD_SEL              0x00000040	/* PPI Active Field Select */
+#define PACK_EN              0x00000080	/* PPI Packing Mode */
+#define DMA32                0x00000100	/* PPI 32-bit DMA Enable */
+#define SKIP_EN              0x00000200	/* PPI Skip Element Enable */
+#define SKIP_EO              0x00000400	/* PPI Skip Even/Odd Elements */
+#define DLENGTH              0x00003800	/* PPI Data Length  */
+#define DLEN_8		     0x0	/* PPI Data Length mask for DLEN=8 */
+#define DLEN(x)	(((x-9) & 0x07) << 11)	/* PPI Data Length (only works for x=10-->x=16) */
+#define DLEN_10              0x00000800 /* Data Length = 10 Bits */
+#define DLEN_11              0x00001000 /* Data Length = 11 Bits */
+#define DLEN_12              0x00001800 /* Data Length = 12 Bits */
+#define DLEN_13              0x00002000 /* Data Length = 13 Bits */
+#define DLEN_14              0x00002800 /* Data Length = 14 Bits */
+#define DLEN_15              0x00003000 /* Data Length = 15 Bits */
+#define DLEN_16              0x00003800 /* Data Length = 16 Bits */
+#define POL                  0x0000C000	/* PPI Signal Polarities       */
+#define	POLC		0x4000		/* PPI Clock Polarity */
+#define	POLS		0x8000		/* PPI Frame Sync Polarity */
+
+/* PPI_STATUS Masks */
+#define FLD	             0x00000400	/* Field Indicator   */
+#define FT_ERR	             0x00000800	/* Frame Track Error */
+#define OVR	             0x00001000	/* FIFO Overflow Error */
+#define UNDR	             0x00002000	/* FIFO Underrun Error */
+#define ERR_DET	      	     0x00004000	/* Error Detected Indicator */
+#define ERR_NCOR	     0x00008000	/* Error Not Corrected Indicator */
+
+/* **********  DMA CONTROLLER MASKS  *********************8 */
+
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP, IMDMA_yy_PERIPHERAL_MAP Masks */
+
+#define CTYPE	            0x00000040	/* DMA Channel Type Indicator */
+#define CTYPE_P             6	/* DMA Channel Type Indicator BIT POSITION */
+#define PCAP8	            0x00000080	/* DMA 8-bit Operation Indicator   */
+#define PCAP16	            0x00000100	/* DMA 16-bit Operation Indicator */
+#define PCAP32	            0x00000200	/* DMA 32-bit Operation Indicator */
+#define PCAPWR	            0x00000400	/* DMA Write Operation Indicator */
+#define PCAPRD	            0x00000800	/* DMA Read Operation Indicator */
+#define PMAP	            0x00007000	/* DMA Peripheral Map Field */
+
+/*  *************  GENERAL PURPOSE TIMER MASKS  ******************** */
+
+/* PWM Timer bit definitions */
+
+/* TIMER_ENABLE Register */
+#define TIMEN0	0x0001
+#define TIMEN1	0x0002
+#define TIMEN2	0x0004
+#define TIMEN3	0x0008
+#define TIMEN4	0x0010
+#define TIMEN5	0x0020
+#define TIMEN6	0x0040
+#define TIMEN7	0x0080
+#define TIMEN8	0x0001
+#define TIMEN9	0x0002
+#define TIMEN10	0x0004
+#define TIMEN11	0x0008
+
+#define TIMEN0_P	0x00
+#define TIMEN1_P	0x01
+#define TIMEN2_P	0x02
+#define TIMEN3_P	0x03
+#define TIMEN4_P	0x04
+#define TIMEN5_P	0x05
+#define TIMEN6_P	0x06
+#define TIMEN7_P	0x07
+#define TIMEN8_P	0x00
+#define TIMEN9_P	0x01
+#define TIMEN10_P	0x02
+#define TIMEN11_P	0x03
+
+/* TIMER_DISABLE Register */
+#define TIMDIS0		0x0001
+#define TIMDIS1		0x0002
+#define TIMDIS2		0x0004
+#define TIMDIS3		0x0008
+#define TIMDIS4		0x0010
+#define TIMDIS5		0x0020
+#define TIMDIS6		0x0040
+#define TIMDIS7		0x0080
+#define TIMDIS8		0x0001
+#define TIMDIS9		0x0002
+#define TIMDIS10	0x0004
+#define TIMDIS11	0x0008
+
+#define TIMDIS0_P	0x00
+#define TIMDIS1_P	0x01
+#define TIMDIS2_P	0x02
+#define TIMDIS3_P	0x03
+#define TIMDIS4_P	0x04
+#define TIMDIS5_P	0x05
+#define TIMDIS6_P	0x06
+#define TIMDIS7_P	0x07
+#define TIMDIS8_P	0x00
+#define TIMDIS9_P	0x01
+#define TIMDIS10_P	0x02
+#define TIMDIS11_P	0x03
+
+/* TIMER_STATUS Register */
+#define TIMIL0		0x00000001
+#define TIMIL1		0x00000002
+#define TIMIL2		0x00000004
+#define TIMIL3		0x00000008
+#define TIMIL4		0x00010000
+#define TIMIL5		0x00020000
+#define TIMIL6		0x00040000
+#define TIMIL7		0x00080000
+#define TIMIL8		0x0001
+#define TIMIL9		0x0002
+#define TIMIL10		0x0004
+#define TIMIL11		0x0008
+#define TOVF_ERR0	0x00000010
+#define TOVF_ERR1	0x00000020
+#define TOVF_ERR2	0x00000040
+#define TOVF_ERR3	0x00000080
+#define TOVF_ERR4	0x00100000
+#define TOVF_ERR5	0x00200000
+#define TOVF_ERR6	0x00400000
+#define TOVF_ERR7	0x00800000
+#define TOVF_ERR8	0x0010
+#define TOVF_ERR9	0x0020
+#define TOVF_ERR10	0x0040
+#define TOVF_ERR11	0x0080
+#define TRUN0		0x00001000
+#define TRUN1		0x00002000
+#define TRUN2		0x00004000
+#define TRUN3		0x00008000
+#define TRUN4		0x10000000
+#define TRUN5		0x20000000
+#define TRUN6		0x40000000
+#define TRUN7		0x80000000
+#define TRUN8		0x1000
+#define TRUN9		0x2000
+#define TRUN10		0x4000
+#define TRUN11		0x8000
+
+#define TIMIL0_P	0x00
+#define TIMIL1_P	0x01
+#define TIMIL2_P	0x02
+#define TIMIL3_P	0x03
+#define TIMIL4_P	0x10
+#define TIMIL5_P	0x11
+#define TIMIL6_P	0x12
+#define TIMIL7_P	0x13
+#define TIMIL8_P	0x00
+#define TIMIL9_P	0x01
+#define TIMIL10_P	0x02
+#define TIMIL11_P	0x03
+#define TOVF_ERR0_P	0x04
+#define TOVF_ERR1_P	0x05
+#define TOVF_ERR2_P	0x06
+#define TOVF_ERR3_P	0x07
+#define TOVF_ERR4_P	0x14
+#define TOVF_ERR5_P	0x15
+#define TOVF_ERR6_P	0x16
+#define TOVF_ERR7_P	0x17
+#define TOVF_ERR8_P	0x04
+#define TOVF_ERR9_P	0x05
+#define TOVF_ERR10_P	0x06
+#define TOVF_ERR11_P	0x07
+#define TRUN0_P		0x0C
+#define TRUN1_P		0x0D
+#define TRUN2_P		0x0E
+#define TRUN3_P		0x0F
+#define TRUN4_P		0x1C
+#define TRUN5_P		0x1D
+#define TRUN6_P		0x1E
+#define TRUN7_P		0x1F
+#define TRUN8_P		0x0C
+#define TRUN9_P		0x0D
+#define TRUN10_P	0x0E
+#define TRUN11_P	0x0F
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define TOVL_ERR0 TOVF_ERR0
+#define TOVL_ERR1 TOVF_ERR1
+#define TOVL_ERR2 TOVF_ERR2
+#define TOVL_ERR3 TOVF_ERR3
+#define TOVL_ERR4 TOVF_ERR4
+#define TOVL_ERR5 TOVF_ERR5
+#define TOVL_ERR6 TOVF_ERR6
+#define TOVL_ERR7 TOVF_ERR7
+#define TOVL_ERR8 TOVF_ERR8
+#define TOVL_ERR9 TOVF_ERR9
+#define TOVL_ERR10 TOVF_ERR10
+#define TOVL_ERR11 TOVF_ERR11
+#define TOVL_ERR0_P TOVF_ERR0_P
+#define TOVL_ERR1_P TOVF_ERR1_P
+#define TOVL_ERR2_P TOVF_ERR2_P
+#define TOVL_ERR3_P TOVF_ERR3_P
+#define TOVL_ERR4_P TOVF_ERR4_P
+#define TOVL_ERR5_P TOVF_ERR5_P
+#define TOVL_ERR6_P TOVF_ERR6_P
+#define TOVL_ERR7_P TOVF_ERR7_P
+#define TOVL_ERR8_P TOVF_ERR8_P
+#define TOVL_ERR9_P TOVF_ERR9_P
+#define TOVL_ERR10_P TOVF_ERR10_P
+#define TOVL_ERR11_P TOVF_ERR11_P
+
+/* TIMERx_CONFIG Registers */
+#define PWM_OUT		0x0001
+#define WDTH_CAP	0x0002
+#define EXT_CLK		0x0003
+#define PULSE_HI	0x0004
+#define PERIOD_CNT	0x0008
+#define IRQ_ENA		0x0010
+#define TIN_SEL		0x0020
+#define OUT_DIS		0x0040
+#define CLK_SEL		0x0080
+#define TOGGLE_HI	0x0100
+#define EMU_RUN		0x0200
+#define ERR_TYP(x)	((x & 0x03) << 14)
+
+#define TMODE_P0		0x00
+#define TMODE_P1		0x01
+#define PULSE_HI_P		0x02
+#define PERIOD_CNT_P		0x03
+#define IRQ_ENA_P		0x04
+#define TIN_SEL_P		0x05
+#define OUT_DIS_P		0x06
+#define CLK_SEL_P		0x07
+#define TOGGLE_HI_P		0x08
+#define EMU_RUN_P		0x09
+#define ERR_TYP_P0		0x0E
+#define ERR_TYP_P1		0x0F
+
+/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  ************* */
+
+/* AMGCTL Masks */
+#define AMCKEN			0x0001	/* Enable CLKOUT */
+#define AMBEN_B0		0x0002	/* Enable Asynchronous Memory Bank 0 only */
+#define AMBEN_B0_B1		0x0004	/* Enable Asynchronous Memory Banks 0 & 1 only */
+#define AMBEN_B0_B1_B2	0x0006	/* Enable Asynchronous Memory Banks 0, 1, and 2 */
+#define AMBEN_ALL		0x0008	/* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */
+#define B0_PEN			0x0010	/* Enable 16-bit packing Bank 0  */
+#define B1_PEN			0x0020	/* Enable 16-bit packing Bank 1  */
+#define B2_PEN			0x0040	/* Enable 16-bit packing Bank 2  */
+#define B3_PEN			0x0080	/* Enable 16-bit packing Bank 3  */
+
+/* AMGCTL Bit Positions */
+#define AMCKEN_P		0x00000000	/* Enable CLKOUT */
+#define AMBEN_P0		0x00000001	/* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
+#define AMBEN_P1		0x00000002	/* Asynchronous Memory Enable, 010 - banks 0&1 enabled,  011 - banks 0-3 enabled */
+#define AMBEN_P2		0x00000003	/* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */
+#define B0_PEN_P			0x004	/* Enable 16-bit packing Bank 0  */
+#define B1_PEN_P			0x005	/* Enable 16-bit packing Bank 1  */
+#define B2_PEN_P			0x006	/* Enable 16-bit packing Bank 2  */
+#define B3_PEN_P			0x007	/* Enable 16-bit packing Bank 3  */
+
+/* AMBCTL0 Masks */
+#define B0RDYEN	0x00000001	/* Bank 0 RDY Enable, 0=disable, 1=enable */
+#define B0RDYPOL 0x00000002	/* Bank 0 RDY Active high, 0=active low, 1=active high */
+#define B0TT_1	0x00000004	/* Bank 0 Transition Time from Read to Write = 1 cycle */
+#define B0TT_2	0x00000008	/* Bank 0 Transition Time from Read to Write = 2 cycles */
+#define B0TT_3	0x0000000C	/* Bank 0 Transition Time from Read to Write = 3 cycles */
+#define B0TT_4	0x00000000	/* Bank 0 Transition Time from Read to Write = 4 cycles */
+#define B0ST_1	0x00000010	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
+#define B0ST_2	0x00000020	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
+#define B0ST_3	0x00000030	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
+#define B0ST_4	0x00000000	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
+#define B0HT_1	0x00000040	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */
+#define B0HT_2	0x00000080	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */
+#define B0HT_3	0x000000C0	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */
+#define B0HT_0	0x00000000	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */
+#define B0RAT_1			0x00000100	/* Bank 0 Read Access Time = 1 cycle */
+#define B0RAT_2			0x00000200	/* Bank 0 Read Access Time = 2 cycles */
+#define B0RAT_3			0x00000300	/* Bank 0 Read Access Time = 3 cycles */
+#define B0RAT_4			0x00000400	/* Bank 0 Read Access Time = 4 cycles */
+#define B0RAT_5			0x00000500	/* Bank 0 Read Access Time = 5 cycles */
+#define B0RAT_6			0x00000600	/* Bank 0 Read Access Time = 6 cycles */
+#define B0RAT_7			0x00000700	/* Bank 0 Read Access Time = 7 cycles */
+#define B0RAT_8			0x00000800	/* Bank 0 Read Access Time = 8 cycles */
+#define B0RAT_9			0x00000900	/* Bank 0 Read Access Time = 9 cycles */
+#define B0RAT_10		0x00000A00	/* Bank 0 Read Access Time = 10 cycles */
+#define B0RAT_11		0x00000B00	/* Bank 0 Read Access Time = 11 cycles */
+#define B0RAT_12		0x00000C00	/* Bank 0 Read Access Time = 12 cycles */
+#define B0RAT_13		0x00000D00	/* Bank 0 Read Access Time = 13 cycles */
+#define B0RAT_14		0x00000E00	/* Bank 0 Read Access Time = 14 cycles */
+#define B0RAT_15		0x00000F00	/* Bank 0 Read Access Time = 15 cycles */
+#define B0WAT_1			0x00001000	/* Bank 0 Write Access Time = 1 cycle */
+#define B0WAT_2			0x00002000	/* Bank 0 Write Access Time = 2 cycles */
+#define B0WAT_3			0x00003000	/* Bank 0 Write Access Time = 3 cycles */
+#define B0WAT_4			0x00004000	/* Bank 0 Write Access Time = 4 cycles */
+#define B0WAT_5			0x00005000	/* Bank 0 Write Access Time = 5 cycles */
+#define B0WAT_6			0x00006000	/* Bank 0 Write Access Time = 6 cycles */
+#define B0WAT_7			0x00007000	/* Bank 0 Write Access Time = 7 cycles */
+#define B0WAT_8			0x00008000	/* Bank 0 Write Access Time = 8 cycles */
+#define B0WAT_9			0x00009000	/* Bank 0 Write Access Time = 9 cycles */
+#define B0WAT_10		0x0000A000	/* Bank 0 Write Access Time = 10 cycles */
+#define B0WAT_11		0x0000B000	/* Bank 0 Write Access Time = 11 cycles */
+#define B0WAT_12		0x0000C000	/* Bank 0 Write Access Time = 12 cycles */
+#define B0WAT_13		0x0000D000	/* Bank 0 Write Access Time = 13 cycles */
+#define B0WAT_14		0x0000E000	/* Bank 0 Write Access Time = 14 cycles */
+#define B0WAT_15		0x0000F000	/* Bank 0 Write Access Time = 15 cycles */
+#define B1RDYEN			0x00010000	/* Bank 1 RDY enable, 0=disable, 1=enable */
+#define B1RDYPOL		0x00020000	/* Bank 1 RDY Active high, 0=active low, 1=active high */
+#define B1TT_1			0x00040000	/* Bank 1 Transition Time from Read to Write = 1 cycle */
+#define B1TT_2			0x00080000	/* Bank 1 Transition Time from Read to Write = 2 cycles */
+#define B1TT_3			0x000C0000	/* Bank 1 Transition Time from Read to Write = 3 cycles */
+#define B1TT_4			0x00000000	/* Bank 1 Transition Time from Read to Write = 4 cycles */
+#define B1ST_1			0x00100000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B1ST_2			0x00200000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B1ST_3			0x00300000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B1ST_4			0x00000000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B1HT_1			0x00400000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B1HT_2			0x00800000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B1HT_3			0x00C00000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B1HT_0			0x00000000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B1RAT_1			0x01000000	/* Bank 1 Read Access Time = 1 cycle */
+#define B1RAT_2			0x02000000	/* Bank 1 Read Access Time = 2 cycles */
+#define B1RAT_3			0x03000000	/* Bank 1 Read Access Time = 3 cycles */
+#define B1RAT_4			0x04000000	/* Bank 1 Read Access Time = 4 cycles */
+#define B1RAT_5			0x05000000	/* Bank 1 Read Access Time = 5 cycles */
+#define B1RAT_6			0x06000000	/* Bank 1 Read Access Time = 6 cycles */
+#define B1RAT_7			0x07000000	/* Bank 1 Read Access Time = 7 cycles */
+#define B1RAT_8			0x08000000	/* Bank 1 Read Access Time = 8 cycles */
+#define B1RAT_9			0x09000000	/* Bank 1 Read Access Time = 9 cycles */
+#define B1RAT_10		0x0A000000	/* Bank 1 Read Access Time = 10 cycles */
+#define B1RAT_11		0x0B000000	/* Bank 1 Read Access Time = 11 cycles */
+#define B1RAT_12		0x0C000000	/* Bank 1 Read Access Time = 12 cycles */
+#define B1RAT_13		0x0D000000	/* Bank 1 Read Access Time = 13 cycles */
+#define B1RAT_14		0x0E000000	/* Bank 1 Read Access Time = 14 cycles */
+#define B1RAT_15		0x0F000000	/* Bank 1 Read Access Time = 15 cycles */
+#define B1WAT_1			0x10000000	/* Bank 1 Write Access Time = 1 cycle */
+#define B1WAT_2			0x20000000	/* Bank 1 Write Access Time = 2 cycles */
+#define B1WAT_3			0x30000000	/* Bank 1 Write Access Time = 3 cycles */
+#define B1WAT_4			0x40000000	/* Bank 1 Write Access Time = 4 cycles */
+#define B1WAT_5			0x50000000	/* Bank 1 Write Access Time = 5 cycles */
+#define B1WAT_6			0x60000000	/* Bank 1 Write Access Time = 6 cycles */
+#define B1WAT_7			0x70000000	/* Bank 1 Write Access Time = 7 cycles */
+#define B1WAT_8			0x80000000	/* Bank 1 Write Access Time = 8 cycles */
+#define B1WAT_9			0x90000000	/* Bank 1 Write Access Time = 9 cycles */
+#define B1WAT_10		0xA0000000	/* Bank 1 Write Access Time = 10 cycles */
+#define B1WAT_11		0xB0000000	/* Bank 1 Write Access Time = 11 cycles */
+#define B1WAT_12		0xC0000000	/* Bank 1 Write Access Time = 12 cycles */
+#define B1WAT_13		0xD0000000	/* Bank 1 Write Access Time = 13 cycles */
+#define B1WAT_14		0xE0000000	/* Bank 1 Write Access Time = 14 cycles */
+#define B1WAT_15		0xF0000000	/* Bank 1 Write Access Time = 15 cycles */
+
+/* AMBCTL1 Masks */
+#define B2RDYEN			0x00000001	/* Bank 2 RDY Enable, 0=disable, 1=enable */
+#define B2RDYPOL		0x00000002	/* Bank 2 RDY Active high, 0=active low, 1=active high */
+#define B2TT_1			0x00000004	/* Bank 2 Transition Time from Read to Write = 1 cycle */
+#define B2TT_2			0x00000008	/* Bank 2 Transition Time from Read to Write = 2 cycles */
+#define B2TT_3			0x0000000C	/* Bank 2 Transition Time from Read to Write = 3 cycles */
+#define B2TT_4			0x00000000	/* Bank 2 Transition Time from Read to Write = 4 cycles */
+#define B2ST_1			0x00000010	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B2ST_2			0x00000020	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B2ST_3			0x00000030	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B2ST_4			0x00000000	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B2HT_1			0x00000040	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B2HT_2			0x00000080	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B2HT_3			0x000000C0	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B2HT_0			0x00000000	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B2RAT_1			0x00000100	/* Bank 2 Read Access Time = 1 cycle */
+#define B2RAT_2			0x00000200	/* Bank 2 Read Access Time = 2 cycles */
+#define B2RAT_3			0x00000300	/* Bank 2 Read Access Time = 3 cycles */
+#define B2RAT_4			0x00000400	/* Bank 2 Read Access Time = 4 cycles */
+#define B2RAT_5			0x00000500	/* Bank 2 Read Access Time = 5 cycles */
+#define B2RAT_6			0x00000600	/* Bank 2 Read Access Time = 6 cycles */
+#define B2RAT_7			0x00000700	/* Bank 2 Read Access Time = 7 cycles */
+#define B2RAT_8			0x00000800	/* Bank 2 Read Access Time = 8 cycles */
+#define B2RAT_9			0x00000900	/* Bank 2 Read Access Time = 9 cycles */
+#define B2RAT_10		0x00000A00	/* Bank 2 Read Access Time = 10 cycles */
+#define B2RAT_11		0x00000B00	/* Bank 2 Read Access Time = 11 cycles */
+#define B2RAT_12		0x00000C00	/* Bank 2 Read Access Time = 12 cycles */
+#define B2RAT_13		0x00000D00	/* Bank 2 Read Access Time = 13 cycles */
+#define B2RAT_14		0x00000E00	/* Bank 2 Read Access Time = 14 cycles */
+#define B2RAT_15		0x00000F00	/* Bank 2 Read Access Time = 15 cycles */
+#define B2WAT_1			0x00001000	/* Bank 2 Write Access Time = 1 cycle */
+#define B2WAT_2			0x00002000	/* Bank 2 Write Access Time = 2 cycles */
+#define B2WAT_3			0x00003000	/* Bank 2 Write Access Time = 3 cycles */
+#define B2WAT_4			0x00004000	/* Bank 2 Write Access Time = 4 cycles */
+#define B2WAT_5			0x00005000	/* Bank 2 Write Access Time = 5 cycles */
+#define B2WAT_6			0x00006000	/* Bank 2 Write Access Time = 6 cycles */
+#define B2WAT_7			0x00007000	/* Bank 2 Write Access Time = 7 cycles */
+#define B2WAT_8			0x00008000	/* Bank 2 Write Access Time = 8 cycles */
+#define B2WAT_9			0x00009000	/* Bank 2 Write Access Time = 9 cycles */
+#define B2WAT_10		0x0000A000	/* Bank 2 Write Access Time = 10 cycles */
+#define B2WAT_11		0x0000B000	/* Bank 2 Write Access Time = 11 cycles */
+#define B2WAT_12		0x0000C000	/* Bank 2 Write Access Time = 12 cycles */
+#define B2WAT_13		0x0000D000	/* Bank 2 Write Access Time = 13 cycles */
+#define B2WAT_14		0x0000E000	/* Bank 2 Write Access Time = 14 cycles */
+#define B2WAT_15		0x0000F000	/* Bank 2 Write Access Time = 15 cycles */
+#define B3RDYEN			0x00010000	/* Bank 3 RDY enable, 0=disable, 1=enable */
+#define B3RDYPOL		0x00020000	/* Bank 3 RDY Active high, 0=active low, 1=active high */
+#define B3TT_1			0x00040000	/* Bank 3 Transition Time from Read to Write = 1 cycle */
+#define B3TT_2			0x00080000	/* Bank 3 Transition Time from Read to Write = 2 cycles */
+#define B3TT_3			0x000C0000	/* Bank 3 Transition Time from Read to Write = 3 cycles */
+#define B3TT_4			0x00000000	/* Bank 3 Transition Time from Read to Write = 4 cycles */
+#define B3ST_1			0x00100000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B3ST_2			0x00200000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B3ST_3			0x00300000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B3ST_4			0x00000000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B3HT_1			0x00400000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B3HT_2			0x00800000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B3HT_3			0x00C00000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B3HT_0			0x00000000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B3RAT_1			0x01000000	/* Bank 3 Read Access Time = 1 cycle */
+#define B3RAT_2			0x02000000	/* Bank 3 Read Access Time = 2 cycles */
+#define B3RAT_3			0x03000000	/* Bank 3 Read Access Time = 3 cycles */
+#define B3RAT_4			0x04000000	/* Bank 3 Read Access Time = 4 cycles */
+#define B3RAT_5			0x05000000	/* Bank 3 Read Access Time = 5 cycles */
+#define B3RAT_6			0x06000000	/* Bank 3 Read Access Time = 6 cycles */
+#define B3RAT_7			0x07000000	/* Bank 3 Read Access Time = 7 cycles */
+#define B3RAT_8			0x08000000	/* Bank 3 Read Access Time = 8 cycles */
+#define B3RAT_9			0x09000000	/* Bank 3 Read Access Time = 9 cycles */
+#define B3RAT_10		0x0A000000	/* Bank 3 Read Access Time = 10 cycles */
+#define B3RAT_11		0x0B000000	/* Bank 3 Read Access Time = 11 cycles */
+#define B3RAT_12		0x0C000000	/* Bank 3 Read Access Time = 12 cycles */
+#define B3RAT_13		0x0D000000	/* Bank 3 Read Access Time = 13 cycles */
+#define B3RAT_14		0x0E000000	/* Bank 3 Read Access Time = 14 cycles */
+#define B3RAT_15		0x0F000000	/* Bank 3 Read Access Time = 15 cycles */
+#define B3WAT_1			0x10000000	/* Bank 3 Write Access Time = 1 cycle */
+#define B3WAT_2			0x20000000	/* Bank 3 Write Access Time = 2 cycles */
+#define B3WAT_3			0x30000000	/* Bank 3 Write Access Time = 3 cycles */
+#define B3WAT_4			0x40000000	/* Bank 3 Write Access Time = 4 cycles */
+#define B3WAT_5			0x50000000	/* Bank 3 Write Access Time = 5 cycles */
+#define B3WAT_6			0x60000000	/* Bank 3 Write Access Time = 6 cycles */
+#define B3WAT_7			0x70000000	/* Bank 3 Write Access Time = 7 cycles */
+#define B3WAT_8			0x80000000	/* Bank 3 Write Access Time = 8 cycles */
+#define B3WAT_9			0x90000000	/* Bank 3 Write Access Time = 9 cycles */
+#define B3WAT_10		0xA0000000	/* Bank 3 Write Access Time = 10 cycles */
+#define B3WAT_11		0xB0000000	/* Bank 3 Write Access Time = 11 cycles */
+#define B3WAT_12		0xC0000000	/* Bank 3 Write Access Time = 12 cycles */
+#define B3WAT_13		0xD0000000	/* Bank 3 Write Access Time = 13 cycles */
+#define B3WAT_14		0xE0000000	/* Bank 3 Write Access Time = 14 cycles */
+#define B3WAT_15		0xF0000000	/* Bank 3 Write Access Time = 15 cycles */
+
+/* **********************  SDRAM CONTROLLER MASKS  *************************** */
+
+/* EBIU_SDGCTL Masks */
+#define SCTLE			0x00000001	/* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */
+#define CL_2			0x00000008	/* SDRAM CAS latency = 2 cycles */
+#define CL_3			0x0000000C	/* SDRAM CAS latency = 3 cycles */
+#define PFE			0x00000010	/* Enable SDRAM prefetch */
+#define PFP			0x00000020	/* Prefetch has priority over AMC requests */
+#define TRAS_1			0x00000040	/* SDRAM tRAS = 1 cycle */
+#define TRAS_2			0x00000080	/* SDRAM tRAS = 2 cycles */
+#define TRAS_3			0x000000C0	/* SDRAM tRAS = 3 cycles */
+#define TRAS_4			0x00000100	/* SDRAM tRAS = 4 cycles */
+#define TRAS_5			0x00000140	/* SDRAM tRAS = 5 cycles */
+#define TRAS_6			0x00000180	/* SDRAM tRAS = 6 cycles */
+#define TRAS_7			0x000001C0	/* SDRAM tRAS = 7 cycles */
+#define TRAS_8			0x00000200	/* SDRAM tRAS = 8 cycles */
+#define TRAS_9			0x00000240	/* SDRAM tRAS = 9 cycles */
+#define TRAS_10			0x00000280	/* SDRAM tRAS = 10 cycles */
+#define TRAS_11			0x000002C0	/* SDRAM tRAS = 11 cycles */
+#define TRAS_12			0x00000300	/* SDRAM tRAS = 12 cycles */
+#define TRAS_13			0x00000340	/* SDRAM tRAS = 13 cycles */
+#define TRAS_14			0x00000380	/* SDRAM tRAS = 14 cycles */
+#define TRAS_15			0x000003C0	/* SDRAM tRAS = 15 cycles */
+#define TRP_1			0x00000800	/* SDRAM tRP = 1 cycle */
+#define TRP_2			0x00001000	/* SDRAM tRP = 2 cycles */
+#define TRP_3			0x00001800	/* SDRAM tRP = 3 cycles */
+#define TRP_4			0x00002000	/* SDRAM tRP = 4 cycles */
+#define TRP_5			0x00002800	/* SDRAM tRP = 5 cycles */
+#define TRP_6			0x00003000	/* SDRAM tRP = 6 cycles */
+#define TRP_7			0x00003800	/* SDRAM tRP = 7 cycles */
+#define TRCD_1			0x00008000	/* SDRAM tRCD = 1 cycle */
+#define TRCD_2			0x00010000	/* SDRAM tRCD = 2 cycles */
+#define TRCD_3			0x00018000	/* SDRAM tRCD = 3 cycles */
+#define TRCD_4			0x00020000	/* SDRAM tRCD = 4 cycles */
+#define TRCD_5			0x00028000	/* SDRAM tRCD = 5 cycles */
+#define TRCD_6			0x00030000	/* SDRAM tRCD = 6 cycles */
+#define TRCD_7			0x00038000	/* SDRAM tRCD = 7 cycles */
+#define TWR_1			0x00080000	/* SDRAM tWR = 1 cycle */
+#define TWR_2			0x00100000	/* SDRAM tWR = 2 cycles */
+#define TWR_3			0x00180000	/* SDRAM tWR = 3 cycles */
+#define PUPSD			0x00200000	/*Power-up start delay */
+#define PSM			0x00400000	/* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */
+#define PSS				0x00800000	/* enable SDRAM power-up sequence on next SDRAM access */
+#define SRFS			0x01000000	/* Start SDRAM self-refresh mode */
+#define EBUFE			0x02000000	/* Enable external buffering timing */
+#define FBBRW			0x04000000	/* Fast back-to-back read write enable */
+#define EMREN			0x10000000	/* Extended mode register enable */
+#define TCSR			0x20000000	/* Temp compensated self refresh value 85 deg C */
+#define CDDBG			0x40000000	/* Tristate SDRAM controls during bus grant */
+
+/* EBIU_SDBCTL Masks */
+#define EB0_E				0x00000001	/* Enable SDRAM external bank 0 */
+#define EB0_SZ_16			0x00000000	/* SDRAM external bank size = 16MB */
+#define EB0_SZ_32			0x00000002	/* SDRAM external bank size = 32MB */
+#define EB0_SZ_64			0x00000004	/* SDRAM external bank size = 64MB */
+#define EB0_SZ_128			0x00000006	/* SDRAM external bank size = 128MB */
+#define EB0_CAW_8			0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EB0_CAW_9			0x00000010	/* SDRAM external bank column address width = 9 bits */
+#define EB0_CAW_10			0x00000020	/* SDRAM external bank column address width = 9 bits */
+#define EB0_CAW_11			0x00000030	/* SDRAM external bank column address width = 9 bits */
+
+#define EB1_E				0x00000100	/* Enable SDRAM external bank 1 */
+#define EB1__SZ_16			0x00000000	/* SDRAM external bank size = 16MB */
+#define EB1__SZ_32			0x00000200	/* SDRAM external bank size = 32MB */
+#define EB1__SZ_64			0x00000400	/* SDRAM external bank size = 64MB */
+#define EB1__SZ_128			0x00000600	/* SDRAM external bank size = 128MB */
+#define EB1__CAW_8			0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EB1__CAW_9			0x00001000	/* SDRAM external bank column address width = 9 bits */
+#define EB1__CAW_10			0x00002000	/* SDRAM external bank column address width = 9 bits */
+#define EB1__CAW_11			0x00003000	/* SDRAM external bank column address width = 9 bits */
+
+#define EB2__E				0x00010000	/* Enable SDRAM external bank 2 */
+#define EB2__SZ_16			0x00000000	/* SDRAM external bank size = 16MB */
+#define EB2__SZ_32			0x00020000	/* SDRAM external bank size = 32MB */
+#define EB2__SZ_64			0x00040000	/* SDRAM external bank size = 64MB */
+#define EB2__SZ_128			0x00060000	/* SDRAM external bank size = 128MB */
+#define EB2__CAW_8			0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EB2__CAW_9			0x00100000	/* SDRAM external bank column address width = 9 bits */
+#define EB2__CAW_10			0x00200000	/* SDRAM external bank column address width = 9 bits */
+#define EB2__CAW_11			0x00300000	/* SDRAM external bank column address width = 9 bits */
+
+#define EB3__E				0x01000000	/* Enable SDRAM external bank 3 */
+#define EB3__SZ_16			0x00000000	/* SDRAM external bank size = 16MB */
+#define EB3__SZ_32			0x02000000	/* SDRAM external bank size = 32MB */
+#define EB3__SZ_64			0x04000000	/* SDRAM external bank size = 64MB */
+#define EB3__SZ_128			0x06000000	/* SDRAM external bank size = 128MB */
+#define EB3__CAW_8			0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EB3__CAW_9			0x10000000	/* SDRAM external bank column address width = 9 bits */
+#define EB3__CAW_10			0x20000000	/* SDRAM external bank column address width = 9 bits */
+#define EB3__CAW_11			0x30000000	/* SDRAM external bank column address width = 9 bits */
+
+/* EBIU_SDSTAT Masks */
+#define SDCI			0x00000001	/* SDRAM controller is idle  */
+#define SDSRA			0x00000002	/* SDRAM SDRAM self refresh is active */
+#define SDPUA			0x00000004	/* SDRAM power up active  */
+#define SDRS			0x00000008	/* SDRAM is in reset state */
+#define SDEASE		    0x00000010	/* SDRAM EAB sticky error status - W1C */
+#define BGSTAT			0x00000020	/* Bus granted */
+
+#endif				/* _DEF_BF561_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/dma.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/dma.h
new file mode 100644
index 0000000..13647c7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/dma.h
@@ -0,0 +1,39 @@
+/* mach/dma.h - arch-specific DMA defines
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define MAX_DMA_CHANNELS 36
+
+/* [#4267] IMDMA channels have no PERIPHERAL_MAP MMR */
+#define MAX_DMA_SUSPEND_CHANNELS 32
+
+#define CH_PPI0			0
+#define CH_PPI			(CH_PPI0)
+#define CH_PPI1			1
+#define CH_SPORT0_RX		12
+#define CH_SPORT0_TX		13
+#define CH_SPORT1_RX		14
+#define CH_SPORT1_TX		15
+#define CH_SPI			16
+#define CH_UART_RX		17
+#define CH_UART_TX		18
+#define CH_MEM_STREAM0_DEST     24	 /* TX */
+#define CH_MEM_STREAM0_SRC      25	 /* RX */
+#define CH_MEM_STREAM1_DEST     26	 /* TX */
+#define CH_MEM_STREAM1_SRC      27	 /* RX */
+#define CH_MEM_STREAM2_DEST	28
+#define CH_MEM_STREAM2_SRC	29
+#define CH_MEM_STREAM3_DEST	30
+#define CH_MEM_STREAM3_SRC	31
+#define CH_IMEM_STREAM0_DEST	32
+#define CH_IMEM_STREAM0_SRC	33
+#define CH_IMEM_STREAM1_DEST	34
+#define CH_IMEM_STREAM1_SRC	35
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/gpio.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/gpio.h
new file mode 100644
index 0000000..f9f8b2a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/gpio.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define MAX_BLACKFIN_GPIOS 48
+
+#define GPIO_PF0	0
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+#define GPIO_PF16	16
+#define GPIO_PF17	17
+#define GPIO_PF18	18
+#define GPIO_PF19	19
+#define GPIO_PF20	20
+#define GPIO_PF21	21
+#define GPIO_PF22	22
+#define GPIO_PF23	23
+#define GPIO_PF24	24
+#define GPIO_PF25	25
+#define GPIO_PF26	26
+#define GPIO_PF27	27
+#define GPIO_PF28	28
+#define GPIO_PF29	29
+#define GPIO_PF30	30
+#define GPIO_PF31	31
+#define GPIO_PF32	32
+#define GPIO_PF33	33
+#define GPIO_PF34	34
+#define GPIO_PF35	35
+#define GPIO_PF36	36
+#define GPIO_PF37	37
+#define GPIO_PF38	38
+#define GPIO_PF39	39
+#define GPIO_PF40	40
+#define GPIO_PF41	41
+#define GPIO_PF42	42
+#define GPIO_PF43	43
+#define GPIO_PF44	44
+#define GPIO_PF45	45
+#define GPIO_PF46	46
+#define GPIO_PF47	47
+
+#define PORT_FIO0 GPIO_PF0
+#define PORT_FIO1 GPIO_PF16
+#define PORT_FIO2 GPIO_PF32
+
+#include <mach-common/ports-f.h>
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/irq.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/irq.h
new file mode 100644
index 0000000..d699852
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/irq.h
@@ -0,0 +1,236 @@
+/*
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BF561_IRQ_H_
+#define _BF561_IRQ_H_
+
+#include <mach-common/irq.h>
+
+#define NR_PERI_INTS		(2 * 32)
+
+#define IRQ_PLL_WAKEUP		BFIN_IRQ(0)	/* PLL Wakeup Interrupt */
+#define IRQ_DMA1_ERROR		BFIN_IRQ(1)	/* DMA1   Error (general) */
+#define IRQ_DMA_ERROR		IRQ_DMA1_ERROR	/* DMA1   Error (general) */
+#define IRQ_DMA2_ERROR		BFIN_IRQ(2)	/* DMA2   Error (general) */
+#define IRQ_IMDMA_ERROR		BFIN_IRQ(3)	/* IMDMA  Error Interrupt */
+#define IRQ_PPI1_ERROR		BFIN_IRQ(4)	/* PPI1   Error Interrupt */
+#define IRQ_PPI_ERROR		IRQ_PPI1_ERROR	/* PPI1   Error Interrupt */
+#define IRQ_PPI2_ERROR		BFIN_IRQ(5)	/* PPI2   Error Interrupt */
+#define IRQ_SPORT0_ERROR	BFIN_IRQ(6)	/* SPORT0 Error Interrupt */
+#define IRQ_SPORT1_ERROR	BFIN_IRQ(7)	/* SPORT1 Error Interrupt */
+#define IRQ_SPI_ERROR		BFIN_IRQ(8)	/* SPI    Error Interrupt */
+#define IRQ_UART_ERROR		BFIN_IRQ(9)	/* UART   Error Interrupt */
+#define IRQ_RESERVED_ERROR	BFIN_IRQ(10)	/* Reversed */
+#define IRQ_DMA1_0		BFIN_IRQ(11)	/* DMA1 0  Interrupt(PPI1) */
+#define IRQ_PPI			IRQ_DMA1_0	/* DMA1 0  Interrupt(PPI1) */
+#define IRQ_PPI0		IRQ_DMA1_0	/* DMA1 0  Interrupt(PPI1) */
+#define IRQ_DMA1_1		BFIN_IRQ(12)	/* DMA1 1  Interrupt(PPI2) */
+#define IRQ_PPI1		IRQ_DMA1_1	/* DMA1 1  Interrupt(PPI2) */
+#define IRQ_DMA1_2		BFIN_IRQ(13)	/* DMA1 2  Interrupt */
+#define IRQ_DMA1_3		BFIN_IRQ(14)	/* DMA1 3  Interrupt */
+#define IRQ_DMA1_4		BFIN_IRQ(15)	/* DMA1 4  Interrupt */
+#define IRQ_DMA1_5		BFIN_IRQ(16)	/* DMA1 5  Interrupt */
+#define IRQ_DMA1_6		BFIN_IRQ(17)	/* DMA1 6  Interrupt */
+#define IRQ_DMA1_7		BFIN_IRQ(18)	/* DMA1 7  Interrupt */
+#define IRQ_DMA1_8		BFIN_IRQ(19)	/* DMA1 8  Interrupt */
+#define IRQ_DMA1_9		BFIN_IRQ(20)	/* DMA1 9  Interrupt */
+#define IRQ_DMA1_10		BFIN_IRQ(21)	/* DMA1 10 Interrupt */
+#define IRQ_DMA1_11		BFIN_IRQ(22)	/* DMA1 11 Interrupt */
+#define IRQ_DMA2_0		BFIN_IRQ(23)	/* DMA2 0  (SPORT0 RX) */
+#define IRQ_SPORT0_RX		IRQ_DMA2_0	/* DMA2 0  (SPORT0 RX) */
+#define IRQ_DMA2_1		BFIN_IRQ(24)	/* DMA2 1  (SPORT0 TX) */
+#define IRQ_SPORT0_TX		IRQ_DMA2_1	/* DMA2 1  (SPORT0 TX) */
+#define IRQ_DMA2_2		BFIN_IRQ(25)	/* DMA2 2  (SPORT1 RX) */
+#define IRQ_SPORT1_RX		IRQ_DMA2_2	/* DMA2 2  (SPORT1 RX) */
+#define IRQ_DMA2_3		BFIN_IRQ(26)	/* DMA2 3  (SPORT2 TX) */
+#define IRQ_SPORT1_TX		IRQ_DMA2_3	/* DMA2 3  (SPORT2 TX) */
+#define IRQ_DMA2_4		BFIN_IRQ(27)	/* DMA2 4  (SPI) */
+#define IRQ_SPI			IRQ_DMA2_4	/* DMA2 4  (SPI) */
+#define IRQ_DMA2_5		BFIN_IRQ(28)	/* DMA2 5  (UART RX) */
+#define IRQ_UART_RX		IRQ_DMA2_5	/* DMA2 5  (UART RX) */
+#define IRQ_DMA2_6		BFIN_IRQ(29)	/* DMA2 6  (UART TX) */
+#define IRQ_UART_TX		IRQ_DMA2_6	/* DMA2 6  (UART TX) */
+#define IRQ_DMA2_7		BFIN_IRQ(30)	/* DMA2 7  Interrupt */
+#define IRQ_DMA2_8		BFIN_IRQ(31)	/* DMA2 8  Interrupt */
+#define IRQ_DMA2_9		BFIN_IRQ(32)	/* DMA2 9  Interrupt */
+#define IRQ_DMA2_10		BFIN_IRQ(33)	/* DMA2 10 Interrupt */
+#define IRQ_DMA2_11		BFIN_IRQ(34)	/* DMA2 11 Interrupt */
+#define IRQ_TIMER0		BFIN_IRQ(35)	/* TIMER 0  Interrupt */
+#define IRQ_TIMER1		BFIN_IRQ(36)	/* TIMER 1  Interrupt */
+#define IRQ_TIMER2		BFIN_IRQ(37)	/* TIMER 2  Interrupt */
+#define IRQ_TIMER3		BFIN_IRQ(38)	/* TIMER 3  Interrupt */
+#define IRQ_TIMER4		BFIN_IRQ(39)	/* TIMER 4  Interrupt */
+#define IRQ_TIMER5		BFIN_IRQ(40)	/* TIMER 5  Interrupt */
+#define IRQ_TIMER6		BFIN_IRQ(41)	/* TIMER 6  Interrupt */
+#define IRQ_TIMER7		BFIN_IRQ(42)	/* TIMER 7  Interrupt */
+#define IRQ_TIMER8		BFIN_IRQ(43)	/* TIMER 8  Interrupt */
+#define IRQ_TIMER9		BFIN_IRQ(44)	/* TIMER 9  Interrupt */
+#define IRQ_TIMER10		BFIN_IRQ(45)	/* TIMER 10 Interrupt */
+#define IRQ_TIMER11		BFIN_IRQ(46)	/* TIMER 11 Interrupt */
+#define IRQ_PROG0_INTA		BFIN_IRQ(47)	/* Programmable Flags0 A (8) */
+#define IRQ_PROG_INTA		IRQ_PROG0_INTA	/* Programmable Flags0 A (8) */
+#define IRQ_PROG0_INTB		BFIN_IRQ(48)	/* Programmable Flags0 B (8) */
+#define IRQ_PROG_INTB		IRQ_PROG0_INTB	/* Programmable Flags0 B (8) */
+#define IRQ_PROG1_INTA		BFIN_IRQ(49)	/* Programmable Flags1 A (8) */
+#define IRQ_PROG1_INTB		BFIN_IRQ(50)	/* Programmable Flags1 B (8) */
+#define IRQ_PROG2_INTA		BFIN_IRQ(51)	/* Programmable Flags2 A (8) */
+#define IRQ_PROG2_INTB		BFIN_IRQ(52)	/* Programmable Flags2 B (8) */
+#define IRQ_DMA1_WRRD0		BFIN_IRQ(53)	/* MDMA1 0 write/read INT */
+#define IRQ_DMA_WRRD0		IRQ_DMA1_WRRD0	/* MDMA1 0 write/read INT */
+#define IRQ_MEM_DMA0		IRQ_DMA1_WRRD0
+#define IRQ_DMA1_WRRD1		BFIN_IRQ(54)	/* MDMA1 1 write/read INT */
+#define IRQ_DMA_WRRD1		IRQ_DMA1_WRRD1	/* MDMA1 1 write/read INT */
+#define IRQ_MEM_DMA1		IRQ_DMA1_WRRD1
+#define IRQ_DMA2_WRRD0		BFIN_IRQ(55)	/* MDMA2 0 write/read INT */
+#define IRQ_MEM_DMA2		IRQ_DMA2_WRRD0
+#define IRQ_DMA2_WRRD1		BFIN_IRQ(56)	/* MDMA2 1 write/read INT */
+#define IRQ_MEM_DMA3		IRQ_DMA2_WRRD1
+#define IRQ_IMDMA_WRRD0		BFIN_IRQ(57)	/* IMDMA 0 write/read INT */
+#define IRQ_IMEM_DMA0		IRQ_IMDMA_WRRD0
+#define IRQ_IMDMA_WRRD1		BFIN_IRQ(58)	/* IMDMA 1 write/read INT */
+#define IRQ_IMEM_DMA1		IRQ_IMDMA_WRRD1
+#define IRQ_WATCH		BFIN_IRQ(59)	/* Watch Dog Timer */
+#define IRQ_RESERVED_1		BFIN_IRQ(60)	/* Reserved interrupt */
+#define IRQ_RESERVED_2		BFIN_IRQ(61)	/* Reserved interrupt */
+#define IRQ_SUPPLE_0		BFIN_IRQ(62)	/* Supplemental interrupt 0 */
+#define IRQ_SUPPLE_1		BFIN_IRQ(63)	/* supplemental interrupt 1 */
+
+#define SYS_IRQS		71
+
+#define IRQ_PF0			73
+#define IRQ_PF1			74
+#define IRQ_PF2			75
+#define IRQ_PF3			76
+#define IRQ_PF4			77
+#define IRQ_PF5			78
+#define IRQ_PF6			79
+#define IRQ_PF7			80
+#define IRQ_PF8			81
+#define IRQ_PF9			82
+#define IRQ_PF10		83
+#define IRQ_PF11		84
+#define IRQ_PF12		85
+#define IRQ_PF13		86
+#define IRQ_PF14		87
+#define IRQ_PF15		88
+#define IRQ_PF16		89
+#define IRQ_PF17		90
+#define IRQ_PF18		91
+#define IRQ_PF19		92
+#define IRQ_PF20		93
+#define IRQ_PF21		94
+#define IRQ_PF22		95
+#define IRQ_PF23		96
+#define IRQ_PF24		97
+#define IRQ_PF25		98
+#define IRQ_PF26		99
+#define IRQ_PF27		100
+#define IRQ_PF28		101
+#define IRQ_PF29		102
+#define IRQ_PF30		103
+#define IRQ_PF31		104
+#define IRQ_PF32		105
+#define IRQ_PF33		106
+#define IRQ_PF34		107
+#define IRQ_PF35		108
+#define IRQ_PF36		109
+#define IRQ_PF37		110
+#define IRQ_PF38		111
+#define IRQ_PF39		112
+#define IRQ_PF40		113
+#define IRQ_PF41		114
+#define IRQ_PF42		115
+#define IRQ_PF43		116
+#define IRQ_PF44		117
+#define IRQ_PF45		118
+#define IRQ_PF46		119
+#define IRQ_PF47		120
+
+#define GPIO_IRQ_BASE		IRQ_PF0
+
+#define NR_MACH_IRQS		(IRQ_PF47 + 1)
+
+/* IAR0 BIT FIELDS */
+#define IRQ_PLL_WAKEUP_POS	0
+#define IRQ_DMA1_ERROR_POS	4
+#define IRQ_DMA2_ERROR_POS	8
+#define IRQ_IMDMA_ERROR_POS	12
+#define IRQ_PPI0_ERROR_POS	16
+#define IRQ_PPI1_ERROR_POS	20
+#define IRQ_SPORT0_ERROR_POS	24
+#define IRQ_SPORT1_ERROR_POS	28
+
+/* IAR1 BIT FIELDS */
+#define IRQ_SPI_ERROR_POS	0
+#define IRQ_UART_ERROR_POS	4
+#define IRQ_RESERVED_ERROR_POS	8
+#define IRQ_DMA1_0_POS		12
+#define IRQ_DMA1_1_POS		16
+#define IRQ_DMA1_2_POS		20
+#define IRQ_DMA1_3_POS		24
+#define IRQ_DMA1_4_POS		28
+
+/* IAR2 BIT FIELDS */
+#define IRQ_DMA1_5_POS		0
+#define IRQ_DMA1_6_POS		4
+#define IRQ_DMA1_7_POS		8
+#define IRQ_DMA1_8_POS		12
+#define IRQ_DMA1_9_POS		16
+#define IRQ_DMA1_10_POS		20
+#define IRQ_DMA1_11_POS		24
+#define IRQ_DMA2_0_POS		28
+
+/* IAR3 BIT FIELDS */
+#define IRQ_DMA2_1_POS		0
+#define IRQ_DMA2_2_POS		4
+#define IRQ_DMA2_3_POS		8
+#define IRQ_DMA2_4_POS		12
+#define IRQ_DMA2_5_POS		16
+#define IRQ_DMA2_6_POS		20
+#define IRQ_DMA2_7_POS		24
+#define IRQ_DMA2_8_POS		28
+
+/* IAR4 BIT FIELDS */
+#define IRQ_DMA2_9_POS		0
+#define IRQ_DMA2_10_POS		4
+#define IRQ_DMA2_11_POS		8
+#define IRQ_TIMER0_POS		12
+#define IRQ_TIMER1_POS		16
+#define IRQ_TIMER2_POS		20
+#define IRQ_TIMER3_POS		24
+#define IRQ_TIMER4_POS		28
+
+/* IAR5 BIT FIELDS */
+#define IRQ_TIMER5_POS		0
+#define IRQ_TIMER6_POS		4
+#define IRQ_TIMER7_POS		8
+#define IRQ_TIMER8_POS		12
+#define IRQ_TIMER9_POS		16
+#define IRQ_TIMER10_POS		20
+#define IRQ_TIMER11_POS		24
+#define IRQ_PROG0_INTA_POS	28
+
+/* IAR6 BIT FIELDS */
+#define IRQ_PROG0_INTB_POS	0
+#define IRQ_PROG1_INTA_POS	4
+#define IRQ_PROG1_INTB_POS	8
+#define IRQ_PROG2_INTA_POS	12
+#define IRQ_PROG2_INTB_POS	16
+#define IRQ_DMA1_WRRD0_POS	20
+#define IRQ_DMA1_WRRD1_POS	24
+#define IRQ_DMA2_WRRD0_POS	28
+
+/* IAR7 BIT FIELDS */
+#define IRQ_DMA2_WRRD1_POS	0
+#define IRQ_IMDMA_WRRD0_POS	4
+#define IRQ_IMDMA_WRRD1_POS	8
+#define IRQ_WDTIMER_POS		12
+#define IRQ_RESERVED_1_POS	16
+#define IRQ_RESERVED_2_POS	20
+#define IRQ_SUPPLE_0_POS	24
+#define IRQ_SUPPLE_1_POS	28
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/mem_map.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/mem_map.h
new file mode 100644
index 0000000..4cc9199
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/mem_map.h
@@ -0,0 +1,219 @@
+/*
+ * BF561 memory map
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
+
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0x2C000000	 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x04000000	/* 64M */
+#define ASYNC_BANK2_BASE	0x28000000	 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x04000000	/* 64M */
+#define ASYNC_BANK1_BASE	0x24000000	 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x04000000	/* 64M */
+#define ASYNC_BANK0_BASE	0x20000000	 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x04000000	/* 64M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x800
+
+/* Level 1 Memory */
+
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
+#else
+#define BFIN_ICACHESIZE	(0*1024)
+#endif
+
+/* Memory Map for ADSP-BF561 processors */
+
+#define COREA_L1_CODE_START       0xFFA00000
+#define COREA_L1_DATA_A_START     0xFF800000
+#define COREA_L1_DATA_B_START     0xFF900000
+#define COREB_L1_CODE_START       0xFF600000
+#define COREB_L1_DATA_A_START     0xFF400000
+#define COREB_L1_DATA_B_START     0xFF500000
+
+#define L1_CODE_START       COREA_L1_CODE_START
+#define L1_DATA_A_START     COREA_L1_DATA_A_START
+#define L1_DATA_B_START     COREA_L1_DATA_B_START
+
+#define L1_CODE_LENGTH      0x4000
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+
+/*
+ * If we are in SMP mode, then the cache settings of Core B will match
+ * the settings of Core A.  If we aren't, then we assume Core B is not
+ * using any cache.  This allows the rest of the kernel to work with
+ * the core in either mode as we are only loading user code into it and
+ * it is the user's problem to make sure they aren't doing something
+ * stupid there.
+ *
+ * Note that we treat the L1 code region as a contiguous blob to make
+ * the rest of the kernel simpler.  Easier to check one region than a
+ * bunch of small ones.  Again, possible misbehavior here is the fault
+ * of the user -- don't try to use memory that doesn't exist.
+ */
+#ifdef CONFIG_SMP
+# define COREB_L1_CODE_LENGTH     L1_CODE_LENGTH
+# define COREB_L1_DATA_A_LENGTH   L1_DATA_A_LENGTH
+# define COREB_L1_DATA_B_LENGTH   L1_DATA_B_LENGTH
+#else
+# define COREB_L1_CODE_LENGTH     0x14000
+# define COREB_L1_DATA_A_LENGTH   0x8000
+# define COREB_L1_DATA_B_LENGTH   0x8000
+#endif
+
+/* Level 2 Memory */
+#define L2_START		0xFEB00000
+#define L2_LENGTH		0x20000
+
+/* Scratch Pad Memory */
+
+#define COREA_L1_SCRATCH_START	0xFFB00000
+#define COREB_L1_SCRATCH_START	0xFF700000
+
+#ifdef CONFIG_SMP
+
+/*
+ * The following macros both return the address of the PDA for the
+ * current core.
+ *
+ * In its first safe (and hairy) form, the macro neither clobbers any
+ * register aside of the output Preg, nor uses the stack, since it
+ * could be called with an invalid stack pointer, or the current stack
+ * space being uncovered by any CPLB (e.g. early exception handling).
+ *
+ * The constraints on the second form are a bit relaxed, and the code
+ * is allowed to use the specified Dreg for determining the PDA
+ * address to be returned into Preg.
+ */
+# define GET_PDA_SAFE(preg)		\
+	preg.l = lo(DSPID);		\
+	preg.h = hi(DSPID);		\
+	preg = [preg];			\
+	preg = preg << 2;		\
+	preg = preg << 2;		\
+	preg = preg << 2;		\
+	preg = preg << 2;		\
+	preg = preg << 2;		\
+	preg = preg << 2;		\
+	preg = preg << 2;		\
+	preg = preg << 2;		\
+	preg = preg << 2;		\
+	preg = preg << 2;		\
+	preg = preg << 2;		\
+	preg = preg << 2;		\
+	if cc jump 2f;			\
+	cc = preg == 0x0;		\
+	preg.l = _cpu_pda;		\
+	preg.h = _cpu_pda;		\
+	if !cc jump 3f;			\
+1:					\
+	/* preg = 0x0; */		\
+	cc = !cc; /* restore cc to 0 */	\
+	jump 4f;			\
+2:					\
+	cc = preg == 0x0;		\
+	preg.l = _cpu_pda;		\
+	preg.h = _cpu_pda;		\
+	if cc jump 4f;			\
+	/* preg = 0x1000000; */		\
+	cc = !cc; /* restore cc to 1 */	\
+3:					\
+	preg = [preg];			\
+4:
+
+# define GET_PDA(preg, dreg)		\
+	preg.l = lo(DSPID);		\
+	preg.h = hi(DSPID);		\
+	dreg = [preg];			\
+	preg.l = _cpu_pda;		\
+	preg.h = _cpu_pda;		\
+	cc = bittst(dreg, 0);		\
+	if !cc jump 1f;			\
+	preg = [preg];			\
+1:					\
+
+# define GET_CPUID(preg, dreg)		\
+	preg.l = lo(DSPID);		\
+	preg.h = hi(DSPID);		\
+	dreg = [preg];			\
+	dreg = ROT dreg BY -1;		\
+	dreg = CC;
+
+# ifndef __ASSEMBLY__
+
+#  include <asm/processor.h>
+
+static inline unsigned long get_l1_scratch_start_cpu(int cpu)
+{
+	return cpu ? COREB_L1_SCRATCH_START : COREA_L1_SCRATCH_START;
+}
+static inline unsigned long get_l1_code_start_cpu(int cpu)
+{
+	return cpu ? COREB_L1_CODE_START : COREA_L1_CODE_START;
+}
+static inline unsigned long get_l1_data_a_start_cpu(int cpu)
+{
+	return cpu ? COREB_L1_DATA_A_START : COREA_L1_DATA_A_START;
+}
+static inline unsigned long get_l1_data_b_start_cpu(int cpu)
+{
+	return cpu ? COREB_L1_DATA_B_START : COREA_L1_DATA_B_START;
+}
+
+static inline unsigned long get_l1_scratch_start(void)
+{
+	return get_l1_scratch_start_cpu(blackfin_core_id());
+}
+static inline unsigned long get_l1_code_start(void)
+{
+	return get_l1_code_start_cpu(blackfin_core_id());
+}
+static inline unsigned long get_l1_data_a_start(void)
+{
+	return get_l1_data_a_start_cpu(blackfin_core_id());
+}
+static inline unsigned long get_l1_data_b_start(void)
+{
+	return get_l1_data_b_start_cpu(blackfin_core_id());
+}
+
+# endif /* __ASSEMBLY__ */
+#endif /* CONFIG_SMP */
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/pll.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/pll.h
new file mode 100644
index 0000000..00bdace
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/pll.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_PLL_H
+#define _MACH_PLL_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_SMP
+
+#include <asm/blackfin.h>
+#include <asm/irqflags.h>
+#include <mach/irq.h>
+
+#define SUPPLE_0_WAKEUP ((IRQ_SUPPLE_0 - (IRQ_CORETMR + 1)) % 32)
+#define SUPPLE_1_WAKEUP ((IRQ_SUPPLE_1 - (IRQ_CORETMR + 1)) % 32)
+
+static inline void
+bfin_iwr_restore(unsigned long iwr0, unsigned long iwr1, unsigned long iwr2)
+{
+	unsigned long SICA_SICB_OFF = ((bfin_read_DSPID() & 0xff) ? 0x1000 : 0);
+
+	bfin_write32(SIC_IWR0 + SICA_SICB_OFF, iwr0);
+	bfin_write32(SIC_IWR1 + SICA_SICB_OFF, iwr1);
+}
+#define bfin_iwr_restore bfin_iwr_restore
+
+static inline void
+bfin_iwr_save(unsigned long niwr0, unsigned long niwr1, unsigned long niwr2,
+              unsigned long *iwr0, unsigned long *iwr1, unsigned long *iwr2)
+{
+	unsigned long SICA_SICB_OFF = ((bfin_read_DSPID() & 0xff) ? 0x1000 : 0);
+
+	*iwr0 = bfin_read32(SIC_IWR0 + SICA_SICB_OFF);
+	*iwr1 = bfin_read32(SIC_IWR1 + SICA_SICB_OFF);
+	bfin_iwr_restore(niwr0, niwr1, niwr2);
+}
+#define bfin_iwr_save bfin_iwr_save
+
+static inline void
+bfin_iwr_set_sup0(unsigned long *iwr0, unsigned long *iwr1, unsigned long *iwr2)
+{
+	bfin_iwr_save(0, IWR_ENABLE(SUPPLE_0_WAKEUP) |
+			IWR_ENABLE(SUPPLE_1_WAKEUP), 0, iwr0, iwr1, iwr2);
+}
+
+#endif
+
+#endif
+
+#include <mach-common/pll.h>
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/portmux.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/portmux.h
new file mode 100644
index 0000000..2339ffd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/portmux.h
@@ -0,0 +1,97 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
+
+#define P_PPI0_CLK	(P_DONTCARE)
+#define P_PPI0_FS1	(P_DONTCARE)
+#define P_PPI0_FS2	(P_DONTCARE)
+#define P_PPI0_FS3	(P_DONTCARE)
+#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF47))
+#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF46))
+#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF45))
+#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PF44))
+#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PF43))
+#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PF42))
+#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PF41))
+#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PF40))
+#define P_PPI0_D0	(P_DONTCARE)
+#define P_PPI0_D1	(P_DONTCARE)
+#define P_PPI0_D2	(P_DONTCARE)
+#define P_PPI0_D3	(P_DONTCARE)
+#define P_PPI0_D4	(P_DONTCARE)
+#define P_PPI0_D5	(P_DONTCARE)
+#define P_PPI0_D6	(P_DONTCARE)
+#define P_PPI0_D7	(P_DONTCARE)
+#define P_PPI1_CLK	(P_DONTCARE)
+#define P_PPI1_FS1	(P_DONTCARE)
+#define P_PPI1_FS2	(P_DONTCARE)
+#define P_PPI1_FS3	(P_DONTCARE)
+#define P_PPI1_D15	(P_DEFINED | P_IDENT(GPIO_PF39))
+#define P_PPI1_D14	(P_DEFINED | P_IDENT(GPIO_PF38))
+#define P_PPI1_D13	(P_DEFINED | P_IDENT(GPIO_PF37))
+#define P_PPI1_D12	(P_DEFINED | P_IDENT(GPIO_PF36))
+#define P_PPI1_D11	(P_DEFINED | P_IDENT(GPIO_PF35))
+#define P_PPI1_D10	(P_DEFINED | P_IDENT(GPIO_PF34))
+#define P_PPI1_D9	(P_DEFINED | P_IDENT(GPIO_PF33))
+#define P_PPI1_D8	(P_DEFINED | P_IDENT(GPIO_PF32))
+#define P_PPI1_D0	(P_DONTCARE)
+#define P_PPI1_D1	(P_DONTCARE)
+#define P_PPI1_D2	(P_DONTCARE)
+#define P_PPI1_D3	(P_DONTCARE)
+#define P_PPI1_D4	(P_DONTCARE)
+#define P_PPI1_D5	(P_DONTCARE)
+#define P_PPI1_D6	(P_DONTCARE)
+#define P_PPI1_D7	(P_DONTCARE)
+#define P_SPORT1_TSCLK	(P_DEFINED | P_IDENT(GPIO_PF31))
+#define P_SPORT1_RSCLK	(P_DEFINED | P_IDENT(GPIO_PF30))
+#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(GPIO_PF29))
+#define P_SPORT0_RSCLK	(P_DEFINED | P_IDENT(GPIO_PF28))
+#define P_UART0_RX	(P_DEFINED | P_IDENT(GPIO_PF27))
+#define P_UART0_TX	(P_DEFINED | P_IDENT(GPIO_PF26))
+#define P_SPORT1_DRSEC	(P_DEFINED | P_IDENT(GPIO_PF25))
+#define P_SPORT1_RFS	(P_DEFINED | P_IDENT(GPIO_PF24))
+#define P_SPORT1_DTPRI	(P_DEFINED | P_IDENT(GPIO_PF23))
+#define P_SPORT1_DTSEC	(P_DEFINED | P_IDENT(GPIO_PF22))
+#define P_SPORT1_TFS	(P_DEFINED | P_IDENT(GPIO_PF21))
+#define P_SPORT1_DRPRI	(P_DONTCARE)
+#define P_SPORT0_DRSEC	(P_DEFINED | P_IDENT(GPIO_PF20))
+#define P_SPORT0_RFS	(P_DEFINED | P_IDENT(GPIO_PF19))
+#define P_SPORT0_DTPRI	(P_DEFINED | P_IDENT(GPIO_PF18))
+#define P_SPORT0_DTSEC	(P_DEFINED | P_IDENT(GPIO_PF17))
+#define P_SPORT0_TFS	(P_DEFINED | P_IDENT(GPIO_PF16))
+#define P_SPORT0_DRPRI	(P_DONTCARE)
+#define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PF15))
+#define P_SPI0_SSEL7	(P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_SPI0_SSEL6	(P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
+#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
+#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+#define P_TMR11		(P_DONTCARE)
+#define P_TMR10		(P_DONTCARE)
+#define P_TMR9		(P_DONTCARE)
+#define P_TMR8		(P_DONTCARE)
+#define P_TMR7		(P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_TMR6		(P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_TMR5		(P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_TMR4		(P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_TMR3		(P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_TMR2		(P_DEFINED | P_IDENT(GPIO_PF2))
+#define P_TMR1		(P_DEFINED | P_IDENT(GPIO_PF1))
+#define P_TMR0		(P_DEFINED | P_IDENT(GPIO_PF0))
+#define P_SPI0_MOSI	(P_DONTCARE)
+#define P_SPI0_MISO	(P_DONTCARE)
+#define P_SPI0_SCK	(P_DONTCARE)
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/smp.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/smp.h
new file mode 100644
index 0000000..346c605
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/include/mach/smp.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_BF561_SMP
+#define _MACH_BF561_SMP
+
+/* This header has to stand alone to avoid circular deps */
+
+struct task_struct;
+
+void platform_init_cpus(void);
+
+void platform_prepare_cpus(unsigned int max_cpus);
+
+int platform_boot_secondary(unsigned int cpu, struct task_struct *idle);
+
+void platform_secondary_init(unsigned int cpu);
+
+void platform_request_ipi(int irq, /*irq_handler_t*/ void *handler);
+
+void platform_send_ipi(cpumask_t callmap, int irq);
+
+void platform_send_ipi_cpu(unsigned int cpu, int irq);
+
+void platform_clear_ipi(unsigned int cpu, int irq);
+
+void bfin_local_timer_setup(void);
+
+#endif /* !_MACH_BF561_SMP */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/ints-priority.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/ints-priority.c
new file mode 100644
index 0000000..7ee9262
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/ints-priority.c
@@ -0,0 +1,87 @@
+/*
+ * Set up the interrupt priorities
+ *
+ * Copyright 2005-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <asm/blackfin.h>
+
+void __init program_IAR(void)
+{
+	/* Program the IAR0 Register with the configured priority */
+	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
+			     ((CONFIG_IRQ_DMA1_ERROR - 7) << IRQ_DMA1_ERROR_POS) |
+			     ((CONFIG_IRQ_DMA2_ERROR - 7) << IRQ_DMA2_ERROR_POS) |
+			     ((CONFIG_IRQ_IMDMA_ERROR - 7) << IRQ_IMDMA_ERROR_POS) |
+			     ((CONFIG_IRQ_PPI0_ERROR - 7) << IRQ_PPI0_ERROR_POS) |
+			     ((CONFIG_IRQ_PPI1_ERROR - 7) << IRQ_PPI1_ERROR_POS) |
+			     ((CONFIG_IRQ_SPORT0_ERROR - 7) << IRQ_SPORT0_ERROR_POS) |
+			     ((CONFIG_IRQ_SPORT1_ERROR - 7) << IRQ_SPORT1_ERROR_POS));
+
+	bfin_write_SIC_IAR1(((CONFIG_IRQ_SPI_ERROR - 7) << IRQ_SPI_ERROR_POS) |
+			     ((CONFIG_IRQ_UART_ERROR - 7) << IRQ_UART_ERROR_POS) |
+			     ((CONFIG_IRQ_RESERVED_ERROR - 7) << IRQ_RESERVED_ERROR_POS) |
+			     ((CONFIG_IRQ_DMA1_0 - 7) << IRQ_DMA1_0_POS) |
+			     ((CONFIG_IRQ_DMA1_1 - 7) << IRQ_DMA1_1_POS) |
+			     ((CONFIG_IRQ_DMA1_2 - 7) << IRQ_DMA1_2_POS) |
+			     ((CONFIG_IRQ_DMA1_3 - 7) << IRQ_DMA1_3_POS) |
+			     ((CONFIG_IRQ_DMA1_4 - 7) << IRQ_DMA1_4_POS));
+
+	bfin_write_SIC_IAR2(((CONFIG_IRQ_DMA1_5 - 7) << IRQ_DMA1_5_POS) |
+			     ((CONFIG_IRQ_DMA1_6 - 7) << IRQ_DMA1_6_POS) |
+			     ((CONFIG_IRQ_DMA1_7 - 7) << IRQ_DMA1_7_POS) |
+			     ((CONFIG_IRQ_DMA1_8 - 7) << IRQ_DMA1_8_POS) |
+			     ((CONFIG_IRQ_DMA1_9 - 7) << IRQ_DMA1_9_POS) |
+			     ((CONFIG_IRQ_DMA1_10 - 7) << IRQ_DMA1_10_POS) |
+			     ((CONFIG_IRQ_DMA1_11 - 7) << IRQ_DMA1_11_POS) |
+			     ((CONFIG_IRQ_DMA2_0 - 7) << IRQ_DMA2_0_POS));
+
+	bfin_write_SIC_IAR3(((CONFIG_IRQ_DMA2_1 - 7) << IRQ_DMA2_1_POS) |
+			     ((CONFIG_IRQ_DMA2_2 - 7) << IRQ_DMA2_2_POS) |
+			     ((CONFIG_IRQ_DMA2_3 - 7) << IRQ_DMA2_3_POS) |
+			     ((CONFIG_IRQ_DMA2_4 - 7) << IRQ_DMA2_4_POS) |
+			     ((CONFIG_IRQ_DMA2_5 - 7) << IRQ_DMA2_5_POS) |
+			     ((CONFIG_IRQ_DMA2_6 - 7) << IRQ_DMA2_6_POS) |
+			     ((CONFIG_IRQ_DMA2_7 - 7) << IRQ_DMA2_7_POS) |
+			     ((CONFIG_IRQ_DMA2_8 - 7) << IRQ_DMA2_8_POS));
+
+	bfin_write_SIC_IAR4(((CONFIG_IRQ_DMA2_9 - 7) << IRQ_DMA2_9_POS) |
+			     ((CONFIG_IRQ_DMA2_10 - 7) << IRQ_DMA2_10_POS) |
+			     ((CONFIG_IRQ_DMA2_11 - 7) << IRQ_DMA2_11_POS) |
+			     ((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
+			     ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) |
+			     ((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
+			     ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
+			     ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS));
+
+	bfin_write_SIC_IAR5(((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
+			     ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
+			     ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) |
+			     ((CONFIG_IRQ_TIMER8 - 7) << IRQ_TIMER8_POS) |
+			     ((CONFIG_IRQ_TIMER9 - 7) << IRQ_TIMER9_POS) |
+			     ((CONFIG_IRQ_TIMER10 - 7) << IRQ_TIMER10_POS) |
+			     ((CONFIG_IRQ_TIMER11 - 7) << IRQ_TIMER11_POS) |
+			     ((CONFIG_IRQ_PROG0_INTA - 7) << IRQ_PROG0_INTA_POS));
+
+	bfin_write_SIC_IAR6(((CONFIG_IRQ_PROG0_INTB - 7) << IRQ_PROG0_INTB_POS) |
+			     ((CONFIG_IRQ_PROG1_INTA - 7) << IRQ_PROG1_INTA_POS) |
+			     ((CONFIG_IRQ_PROG1_INTB - 7) << IRQ_PROG1_INTB_POS) |
+			     ((CONFIG_IRQ_PROG2_INTA - 7) << IRQ_PROG2_INTA_POS) |
+			     ((CONFIG_IRQ_PROG2_INTB - 7) << IRQ_PROG2_INTB_POS) |
+			     ((CONFIG_IRQ_DMA1_WRRD0 - 7) << IRQ_DMA1_WRRD0_POS) |
+			     ((CONFIG_IRQ_DMA1_WRRD1 - 7) << IRQ_DMA1_WRRD1_POS) |
+			     ((CONFIG_IRQ_DMA2_WRRD0 - 7) << IRQ_DMA2_WRRD0_POS));
+
+	bfin_write_SIC_IAR7(((CONFIG_IRQ_DMA2_WRRD1 - 7) << IRQ_DMA2_WRRD1_POS) |
+			     ((CONFIG_IRQ_IMDMA_WRRD0 - 7) << IRQ_IMDMA_WRRD0_POS) |
+			     ((CONFIG_IRQ_IMDMA_WRRD1 - 7) << IRQ_IMDMA_WRRD1_POS) |
+			     ((CONFIG_IRQ_WDTIMER - 7) << IRQ_WDTIMER_POS) |
+			     (0 << IRQ_RESERVED_1_POS) | (0 << IRQ_RESERVED_2_POS) |
+			     (0 << IRQ_SUPPLE_0_POS) | (0 << IRQ_SUPPLE_1_POS));
+
+	SSYNC();
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/secondary.S b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/secondary.S
new file mode 100644
index 0000000..01e5408
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/secondary.S
@@ -0,0 +1,192 @@
+/*
+ * BF561 coreB bootstrap file
+ *
+ * Copyright 2007-2009 Analog Devices Inc.
+ *               Philippe Gerum <rpm@xenomai.org>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/blackfin.h>
+#include <asm/asm-offsets.h>
+#include <asm/trace.h>
+
+/*
+ * This code must come first as CoreB is hardcoded (in hardware)
+ * to start at the beginning of its L1 instruction memory.
+ */
+.section .l1.text.head
+
+/* Lay the initial stack into the L1 scratch area of Core B */
+#define INITIAL_STACK	(COREB_L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
+
+ENTRY(_coreb_trampoline_start)
+	/* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+	R0 = SYSCFG_SNEN;
+#else
+	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
+	SYSCFG = R0;
+
+	/* Optimization register tricks: keep a base value in the
+	 * reserved P registers so we use the load/store with an
+	 * offset syntax.  R0 = [P5 + <constant>];
+	 *   P5 - core MMR base
+	 *   R6 - 0
+	 */
+	r6 = 0;
+	p5.l = 0;
+	p5.h = hi(COREMMR_BASE);
+
+	/* Zero out registers required by Blackfin ABI */
+
+	/* Disable circular buffers */
+	L0 = r6;
+	L1 = r6;
+	L2 = r6;
+	L3 = r6;
+
+	/* Disable hardware loops in case we were started by 'go' */
+	LC0 = r6;
+	LC1 = r6;
+
+	/*
+	 * Clear ITEST_COMMAND and DTEST_COMMAND registers,
+	 * Leaving these as non-zero can confuse the emulator
+	 */
+	[p5 + (DTEST_COMMAND - COREMMR_BASE)] = r6;
+	[p5 + (ITEST_COMMAND - COREMMR_BASE)] = r6;
+	CSYNC;
+
+	trace_buffer_init(p0,r0);
+
+	/* Turn off the icache */
+	r1 = [p5 + (IMEM_CONTROL - COREMMR_BASE)];
+	BITCLR (r1, ENICPLB_P);
+	[p5 + (IMEM_CONTROL - COREMMR_BASE)] = r1;
+	SSYNC;
+
+	/* Turn off the dcache */
+	r1 = [p5 + (DMEM_CONTROL - COREMMR_BASE)];
+	BITCLR (r1, ENDCPLB_P);
+	[p5 + (DMEM_CONTROL - COREMMR_BASE)] = r1;
+	SSYNC;
+
+	/* in case of double faults, save a few things */
+	p1.l = _initial_pda_coreb;
+	p1.h = _initial_pda_coreb;
+	r4 = RETX;
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/* Only save these if we are storing them,
+	 * This happens here, since L1 gets clobbered
+	 * below
+	 */
+	GET_PDA(p0, r0);
+	r0 = [p0 + PDA_DF_RETX];
+	r1 = [p0 + PDA_DF_DCPLB];
+	r2 = [p0 + PDA_DF_ICPLB];
+	r3 = [p0 + PDA_DF_SEQSTAT];
+	[p1 + PDA_INIT_DF_RETX] = r0;
+	[p1 + PDA_INIT_DF_DCPLB] = r1;
+	[p1 + PDA_INIT_DF_ICPLB] = r2;
+	[p1 + PDA_INIT_DF_SEQSTAT] = r3;
+#endif
+	[p1 + PDA_INIT_RETX] = r4;
+
+	/* Initialize stack pointer */
+	sp.l = lo(INITIAL_STACK);
+	sp.h = hi(INITIAL_STACK);
+	fp = sp;
+	usp = sp;
+
+	/* This section keeps the processor in supervisor mode
+	 * during core B startup.  Branches to the idle task.
+	 */
+
+	/* EVT15 = _real_start */
+
+	p1.l = _coreb_start;
+	p1.h = _coreb_start;
+	[p5 + (EVT15 - COREMMR_BASE)] = p1;
+	csync;
+
+	r0 = EVT_IVG15 (z);
+	sti r0;
+
+	raise 15;
+	p0.l = .LWAIT_HERE;
+	p0.h = .LWAIT_HERE;
+	reti = p0;
+#if defined(ANOMALY_05000281)
+	nop; nop; nop;
+#endif
+	rti;
+
+.LWAIT_HERE:
+	jump .LWAIT_HERE;
+ENDPROC(_coreb_trampoline_start)
+
+#ifdef CONFIG_HOTPLUG_CPU
+.section ".text"
+ENTRY(_coreb_die)
+	sp.l = lo(INITIAL_STACK);
+	sp.h = hi(INITIAL_STACK);
+	fp = sp;
+	usp = sp;
+
+	CLI R2;
+	SSYNC;
+	IDLE;
+	STI R2;
+
+	R0 = IWR_DISABLE_ALL;
+	P0.H = hi(SYSMMR_BASE);
+	P0.L = lo(SYSMMR_BASE);
+	[P0 + (SICB_IWR0 - SYSMMR_BASE)] = R0;
+	[P0 + (SICB_IWR1 - SYSMMR_BASE)] = R0;
+	SSYNC;
+
+	p0.h = hi(COREB_L1_CODE_START);
+	p0.l = lo(COREB_L1_CODE_START);
+	jump (p0);
+ENDPROC(_coreb_die)
+#endif
+
+__INIT
+ENTRY(_coreb_start)
+	[--sp] = reti;
+
+	p0.l = lo(WDOGB_CTL);
+	p0.h = hi(WDOGB_CTL);
+	r0 = 0xAD6(z);
+	w[p0] = r0;	/* Clear the watchdog. */
+	ssync;
+
+	/*
+	 * switch to IDLE stack.
+	 */
+	p0.l = _secondary_stack;
+	p0.h = _secondary_stack;
+	sp = [p0];
+	usp = sp;
+	fp = sp;
+#ifdef CONFIG_HOTPLUG_CPU
+	p0.l = _hotplug_coreb;
+	p0.h = _hotplug_coreb;
+	r0 = [p0];
+	cc = BITTST(r0, 0);
+	if cc jump 3f;
+#endif
+	sp += -12;
+	call _init_pda
+	sp += 12;
+#ifdef CONFIG_HOTPLUG_CPU
+3:
+#endif
+	call _secondary_start_kernel;
+.L_exit:
+	jump.s	.L_exit;
+ENDPROC(_coreb_start)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/smp.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/smp.c
new file mode 100644
index 0000000..8c0c80f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf561/smp.c
@@ -0,0 +1,172 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *               Philippe Gerum <rpm@xenomai.org>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <asm/smp.h>
+#include <asm/dma.h>
+#include <asm/time.h>
+
+static DEFINE_SPINLOCK(boot_lock);
+
+/*
+ * platform_init_cpus() - Tell the world about how many cores we
+ * have. This is called while setting up the architecture support
+ * (setup_arch()), so don't be too demanding here with respect to
+ * available kernel services.
+ */
+
+void __init platform_init_cpus(void)
+{
+	struct cpumask mask;
+
+	cpumask_set_cpu(0, &mask); /* CoreA */
+	cpumask_set_cpu(1, &mask); /* CoreB */
+	init_cpu_possible(&mask);
+}
+
+void __init platform_prepare_cpus(unsigned int max_cpus)
+{
+	struct cpumask mask;
+
+	bfin_relocate_coreb_l1_mem();
+
+	/* Both cores ought to be present on a bf561! */
+	cpumask_set_cpu(0, &mask); /* CoreA */
+	cpumask_set_cpu(1, &mask); /* CoreB */
+	init_cpu_present(&mask);
+}
+
+int __init setup_profiling_timer(unsigned int multiplier) /* not supported */
+{
+	return -EINVAL;
+}
+
+void platform_secondary_init(unsigned int cpu)
+{
+	/* Clone setup for peripheral interrupt sources from CoreA. */
+	bfin_write_SICB_IMASK0(bfin_read_SIC_IMASK0());
+	bfin_write_SICB_IMASK1(bfin_read_SIC_IMASK1());
+	SSYNC();
+
+	/* Clone setup for IARs from CoreA. */
+	bfin_write_SICB_IAR0(bfin_read_SIC_IAR0());
+	bfin_write_SICB_IAR1(bfin_read_SIC_IAR1());
+	bfin_write_SICB_IAR2(bfin_read_SIC_IAR2());
+	bfin_write_SICB_IAR3(bfin_read_SIC_IAR3());
+	bfin_write_SICB_IAR4(bfin_read_SIC_IAR4());
+	bfin_write_SICB_IAR5(bfin_read_SIC_IAR5());
+	bfin_write_SICB_IAR6(bfin_read_SIC_IAR6());
+	bfin_write_SICB_IAR7(bfin_read_SIC_IAR7());
+	bfin_write_SICB_IWR0(IWR_DISABLE_ALL);
+	bfin_write_SICB_IWR1(IWR_DISABLE_ALL);
+	SSYNC();
+
+	/* We are done with local CPU inits, unblock the boot CPU. */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int platform_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	printk(KERN_INFO "Booting Core B.\n");
+
+	spin_lock(&boot_lock);
+
+	if ((bfin_read_SYSCR() & COREB_SRAM_INIT) == 0) {
+		/* CoreB already running, sending ipi to wakeup it */
+		smp_send_reschedule(cpu);
+	} else {
+		/* Kick CoreB, which should start execution from CORE_SRAM_BASE. */
+		bfin_write_SYSCR(bfin_read_SYSCR() & ~COREB_SRAM_INIT);
+		SSYNC();
+	}
+
+	timeout = jiffies + HZ;
+	/* release the lock and let coreb run */
+	spin_unlock(&boot_lock);
+	while (time_before(jiffies, timeout)) {
+		if (cpu_online(cpu))
+			break;
+		udelay(100);
+		barrier();
+	}
+
+	if (cpu_online(cpu)) {
+		return 0;
+	} else
+		panic("CPU%u: processor failed to boot\n", cpu);
+}
+
+static const char supple0[] = "IRQ_SUPPLE_0";
+static const char supple1[] = "IRQ_SUPPLE_1";
+void __init platform_request_ipi(int irq, void *handler)
+{
+	int ret;
+	const char *name = (irq == IRQ_SUPPLE_0) ? supple0 : supple1;
+
+	ret = request_irq(irq, handler, IRQF_PERCPU | IRQF_NO_SUSPEND |
+			IRQF_FORCE_RESUME, name, handler);
+	if (ret)
+		panic("Cannot request %s for IPI service", name);
+}
+
+void platform_send_ipi(cpumask_t callmap, int irq)
+{
+	unsigned int cpu;
+	int offset = (irq == IRQ_SUPPLE_0) ? 6 : 8;
+
+	for_each_cpu(cpu, &callmap) {
+		BUG_ON(cpu >= 2);
+		SSYNC();
+		bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (offset + cpu)));
+		SSYNC();
+	}
+}
+
+void platform_send_ipi_cpu(unsigned int cpu, int irq)
+{
+	int offset = (irq == IRQ_SUPPLE_0) ? 6 : 8;
+	BUG_ON(cpu >= 2);
+	SSYNC();
+	bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (offset + cpu)));
+	SSYNC();
+}
+
+void platform_clear_ipi(unsigned int cpu, int irq)
+{
+	int offset = (irq == IRQ_SUPPLE_0) ? 10 : 12;
+	BUG_ON(cpu >= 2);
+	SSYNC();
+	bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (offset + cpu)));
+	SSYNC();
+}
+
+/*
+ * Setup core B's local core timer.
+ * In SMP, core timer is used for clock event device.
+ */
+void bfin_local_timer_setup(void)
+{
+#if defined(CONFIG_TICKSOURCE_CORETMR)
+	struct irq_data *data = irq_get_irq_data(IRQ_CORETMR);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+
+	bfin_coretmr_init();
+	bfin_coretmr_clockevent_init();
+
+	chip->irq_unmask(data);
+#else
+	/* Power down the core timer, just to play safe. */
+	bfin_write_TCNTL(0);
+#endif
+
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/Kconfig
new file mode 100644
index 0000000..7d6a8b8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/Kconfig
@@ -0,0 +1,1684 @@
+# SPDX-License-Identifier: GPL-2.0
+config BF60x
+	def_bool y
+	depends on (BF609)
+	select IRQ_PREFLOW_FASTEOI
+
+if (BF60x)
+
+source "arch/blackfin/mach-bf609/boards/Kconfig"
+
+menu "BF609 Specific Configuration"
+
+config SEC_IRQ_PRIORITY_LEVELS
+	int "SEC interrupt priority levels"
+	default 7
+	range 0 7
+	help
+	  Divide the total number of interrupt priority levels into sub-levels.
+	  There is 2 ^ (SEC_IRQ_PRIORITY_LEVELS + 1) different levels.
+
+config L1_PARITY_CHECK
+	bool "Enable L1 parity check"
+	default n
+	help
+	  Enable the L1 parity check in L1 sram. A fault event is raised
+	  when L1 parity error is found.
+
+comment "System Cross Bar Priority Assignment"
+
+config SCB_PRIORITY
+	bool "Init System Cross Bar Priority"
+	default n
+
+menuconfig	SCB0_MI0
+	bool "SCB0 Master Interface 0 (DDR)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	Core 0	-- 0
+	Core 1	-- 2
+	SCB1	-- 9
+	SCB2	-- 10
+	SCB3	-- 11
+	SCB4	-- 12
+	SCB5	-- 5
+	SCB6	-- 6
+	SCB7	-- 8
+	SCB8	-- 7
+	SCB9	-- 4
+	USB	-- 13
+
+if SCB0_MI0
+
+config SCB0_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI0_SLOT10
+	int "Slot 10 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI0_SLOT11
+	int "Slot 11 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI0_SLOT12
+	int "Slot 12 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI0_SLOT13
+	int "Slot 13 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI0_SLOT14
+	int "Slot 14 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI0_SLOT15
+	int "Slot 15 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI0_SLOT16
+	int "Slot 16 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI0_SLOT17
+	int "Slot 17 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI0_SLOT18
+	int "Slot 18 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI0_SLOT19
+	int "Slot 19 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI0_SLOT20
+	int "Slot 20 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI0_SLOT21
+	int "Slot 21 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI0_SLOT22
+	int "Slot 22 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI0_SLOT23
+	int "Slot 23 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI0_SLOT24
+	int "Slot 24 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI0_SLOT25
+	int "Slot 25 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI0_SLOT26
+	int "Slot 26 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI0_SLOT27
+	int "Slot 27 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI0_SLOT28
+	int "Slot 28 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI0_SLOT29
+	int "Slot 29 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI0_SLOT30
+	int "Slot 30 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI0_SLOT31
+	int "Slot 31 slave interface id"
+	default 13
+	range 0 13
+
+endif # SCB0_MI0
+
+menuconfig	SCB0_MI1
+	bool "SCB0 Master Interface 1 (SMC)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	Core 0	-- 0
+	Core 1	-- 2
+	SCB1	-- 9
+	SCB2	-- 10
+	SCB3	-- 11
+	SCB4	-- 12
+	SCB5	-- 5
+	SCB6	-- 6
+	SCB7	-- 8
+	SCB8	-- 7
+	SCB9	-- 4
+	USB	-- 13
+
+if SCB0_MI1
+
+config SCB0_MI1_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI1_SLOT1
+	int "Slot 1 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI1_SLOT2
+	int "Slot 2 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI1_SLOT3
+	int "Slot 3 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI1_SLOT4
+	int "Slot 4 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI1_SLOT5
+	int "Slot 5 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI1_SLOT6
+	int "Slot 6 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI1_SLOT7
+	int "Slot 7 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI1_SLOT8
+	int "Slot 8 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI1_SLOT9
+	int "Slot 9 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI1_SLOT10
+	int "Slot 10 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI1_SLOT11
+	int "Slot 11 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI1_SLOT12
+	int "Slot 12 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI1_SLOT13
+	int "Slot 13 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI1_SLOT14
+	int "Slot 14 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI1_SLOT15
+	int "Slot 15 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI1_SLOT16
+	int "Slot 16 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI1_SLOT17
+	int "Slot 17 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI1_SLOT18
+	int "Slot 18 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI1_SLOT19
+	int "Slot 19 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI1_SLOT20
+	int "Slot 20 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI1_SLOT21
+	int "Slot 21 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI1_SLOT22
+	int "Slot 22 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI1_SLOT23
+	int "Slot 23 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI1_SLOT24
+	int "Slot 24 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI1_SLOT25
+	int "Slot 25 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI1_SLOT26
+	int "Slot 26 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI1_SLOT27
+	int "Slot 27 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI1_SLOT28
+	int "Slot 28 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI1_SLOT29
+	int "Slot 29 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI1_SLOT30
+	int "Slot 30 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI1_SLOT31
+	int "Slot 31 slave interface id"
+	default 13
+	range 0 13
+
+endif # SCB0_MI1
+
+menuconfig	SCB0_MI2
+	bool "SCB0 Master Interface 2 (Data L2)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	Core 0	-- 0
+	Core 1	-- 2
+	SCB1	-- 9
+	SCB2	-- 10
+	SCB3	-- 11
+	SCB4	-- 12
+	SCB5	-- 5
+	SCB6	-- 6
+	SCB7	-- 8
+	SCB8	-- 7
+	SCB9	-- 4
+	USB	-- 13
+
+if SCB0_MI2
+
+config SCB0_MI2_SLOT0
+	int "Slot 0 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI2_SLOT1
+	int "Slot 1 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI2_SLOT2
+	int "Slot 2 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI2_SLOT3
+	int "Slot 3 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI2_SLOT4
+	int "Slot 4 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI2_SLOT5
+	int "Slot 5 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI2_SLOT6
+	int "Slot 6 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI2_SLOT7
+	int "Slot 7 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI2_SLOT8
+	int "Slot 8 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI2_SLOT9
+	int "Slot 9 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI2_SLOT10
+	int "Slot 10 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI2_SLOT11
+	int "Slot 11 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI2_SLOT12
+	int "Slot 12 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI2_SLOT13
+	int "Slot 13 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI2_SLOT14
+	int "Slot 14 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI2_SLOT15
+	int "Slot 15 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI2_SLOT16
+	int "Slot 16 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI2_SLOT17
+	int "Slot 17 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI2_SLOT18
+	int "Slot 18 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI2_SLOT19
+	int "Slot 19 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI2_SLOT20
+	int "Slot 20 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI2_SLOT21
+	int "Slot 21 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI2_SLOT22
+	int "Slot 22 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI2_SLOT23
+	int "Slot 23 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI2_SLOT24
+	int "Slot 24 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI2_SLOT25
+	int "Slot 25 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI2_SLOT26
+	int "Slot 26 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI2_SLOT27
+	int "Slot 27 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI2_SLOT28
+	int "Slot 28 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI2_SLOT29
+	int "Slot 29 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI2_SLOT30
+	int "Slot 30 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI2_SLOT31
+	int "Slot 31 slave interface id"
+	default 7
+	range 0 13
+
+endif # SCB0_MI2
+
+menuconfig	SCB0_MI3
+	bool "SCB0 Master Interface 3 (L1A)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	Core 0	-- 0
+	Core 1	-- 2
+	SCB1	-- 9
+	SCB2	-- 10
+	SCB3	-- 11
+	SCB4	-- 12
+	SCB5	-- 5
+	SCB6	-- 6
+	SCB7	-- 8
+	SCB8	-- 7
+	SCB9	-- 4
+	USB	-- 13
+
+if SCB0_MI3
+
+config SCB0_MI3_SLOT0
+	int "Slot 0 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI3_SLOT1
+	int "Slot 1 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI3_SLOT2
+	int "Slot 2 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI3_SLOT3
+	int "Slot 3 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI3_SLOT4
+	int "Slot 4 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI3_SLOT5
+	int "Slot 5 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI3_SLOT6
+	int "Slot 6 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI3_SLOT7
+	int "Slot 7 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI3_SLOT8
+	int "Slot 8 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI3_SLOT9
+	int "Slot 9 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI3_SLOT10
+	int "Slot 10 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI3_SLOT11
+	int "Slot 11 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI3_SLOT12
+	int "Slot 12 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI3_SLOT13
+	int "Slot 13 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI3_SLOT14
+	int "Slot 14 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI3_SLOT15
+	int "Slot 15 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI3_SLOT16
+	int "Slot 16 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI3_SLOT17
+	int "Slot 17 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI3_SLOT18
+	int "Slot 18 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI3_SLOT19
+	int "Slot 19 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI3_SLOT20
+	int "Slot 20 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI3_SLOT21
+	int "Slot 21 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI3_SLOT22
+	int "Slot 22 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI3_SLOT23
+	int "Slot 23 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI3_SLOT24
+	int "Slot 24 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI3_SLOT25
+	int "Slot 25 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI3_SLOT26
+	int "Slot 26 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI3_SLOT27
+	int "Slot 27 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI3_SLOT28
+	int "Slot 28 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI3_SLOT29
+	int "Slot 29 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI3_SLOT30
+	int "Slot 30 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI3_SLOT31
+	int "Slot 31 slave interface id"
+	default 7
+	range 0 13
+
+endif # SCB0_MI3
+
+menuconfig	SCB0_MI4
+	bool "SCB0 Master Interface 4 (L1B)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	Core 0	-- 0
+	Core 1	-- 2
+	SCB1	-- 9
+	SCB2	-- 10
+	SCB3	-- 11
+	SCB4	-- 12
+	SCB5	-- 5
+	SCB6	-- 6
+	SCB7	-- 8
+	SCB8	-- 7
+	SCB9	-- 4
+	USB	-- 13
+
+if SCB0_MI4
+
+config SCB0_MI4_SLOT0
+	int "Slot 0 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI4_SLOT1
+	int "Slot 1 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI4_SLOT2
+	int "Slot 2 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI4_SLOT3
+	int "Slot 3 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI4_SLOT4
+	int "Slot 4 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI4_SLOT5
+	int "Slot 5 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI4_SLOT6
+	int "Slot 6 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI4_SLOT7
+	int "Slot 7 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI4_SLOT8
+	int "Slot 8 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI4_SLOT9
+	int "Slot 9 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI4_SLOT10
+	int "Slot 10 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI4_SLOT11
+	int "Slot 11 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI4_SLOT12
+	int "Slot 12 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI4_SLOT13
+	int "Slot 13 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI4_SLOT14
+	int "Slot 14 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI4_SLOT15
+	int "Slot 15 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI4_SLOT16
+	int "Slot 16 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI4_SLOT17
+	int "Slot 17 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI4_SLOT18
+	int "Slot 18 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI4_SLOT19
+	int "Slot 19 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI4_SLOT20
+	int "Slot 20 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI4_SLOT21
+	int "Slot 21 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI4_SLOT22
+	int "Slot 22 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI4_SLOT23
+	int "Slot 23 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI4_SLOT24
+	int "Slot 24 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI4_SLOT25
+	int "Slot 25 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI4_SLOT26
+	int "Slot 26 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI4_SLOT27
+	int "Slot 27 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI4_SLOT28
+	int "Slot 28 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI4_SLOT29
+	int "Slot 29 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI4_SLOT30
+	int "Slot 30 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI4_SLOT31
+	int "Slot 31 slave interface id"
+	default 7
+	range 0 13
+
+endif # SCB0_MI4
+
+menuconfig	SCB0_MI5
+	bool "SCB0 Master Interface 5 (SMMR)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	MMR0	-- 1
+	MMR1	-- 3
+	SCB2	-- 10
+	SCB4	-- 12
+
+if SCB0_MI5
+
+config SCB0_MI5_SLOT0
+	int "Slot 0 slave interface id"
+	default 1
+	range 0 13
+
+config SCB0_MI5_SLOT1
+	int "Slot 1 slave interface id"
+	default 3
+	range 0 13
+
+config SCB0_MI5_SLOT2
+	int "Slot 2 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI5_SLOT3
+	int "Slot 3 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI5_SLOT4
+	int "Slot 4 slave interface id"
+	default 1
+	range 0 13
+
+config SCB0_MI5_SLOT5
+	int "Slot 5 slave interface id"
+	default 3
+	range 0 13
+
+config SCB0_MI5_SLOT6
+	int "Slot 6 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI5_SLOT7
+	int "Slot 7 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI5_SLOT8
+	int "Slot 8 slave interface id"
+	default 1
+	range 0 13
+
+config SCB0_MI5_SLOT9
+	int "Slot 9 slave interface id"
+	default 3
+	range 0 13
+
+config SCB0_MI5_SLOT10
+	int "Slot 10 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI5_SLOT11
+	int "Slot 11 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI5_SLOT12
+	int "Slot 12 slave interface id"
+	default 1
+	range 0 13
+
+config SCB0_MI5_SLOT13
+	int "Slot 13 slave interface id"
+	default 3
+	range 0 13
+
+config SCB0_MI5_SLOT14
+	int "Slot 14 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI5_SLOT15
+	int "Slot 15 slave interface id"
+	default 12
+	range 0 13
+
+endif # SCB0_MI5
+
+menuconfig	SCB1_MI0
+	bool "SCB1 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	SPORT0A	-- 0
+	SPORT0B	-- 1
+	SPORT1A	-- 2
+	SPORT1B	-- 3
+	SPORT2A	-- 4
+	SPORT2B	-- 5
+	SPI0TX	-- 6
+	SPI0RX	-- 7
+	SPI1TX	-- 8
+	SPI1RX	-- 9
+
+if SCB1_MI0
+
+config SCB1_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 9
+
+config SCB1_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 9
+
+config SCB1_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 9
+
+config SCB1_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 9
+
+config SCB1_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 4
+	range 0 9
+
+config SCB1_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 5
+	range 0 9
+
+config SCB1_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 6
+	range 0 9
+
+config SCB1_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 7
+	range 0 9
+
+config SCB1_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 8
+	range 0 9
+
+config SCB1_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 9
+	range 0 9
+
+config SCB1_MI0_SLOT10
+	int "Slot 10 slave interface id"
+	default 0
+	range 0 9
+
+config SCB1_MI0_SLOT11
+	int "Slot 11 slave interface id"
+	default 1
+	range 0 9
+
+config SCB1_MI0_SLOT12
+	int "Slot 12 slave interface id"
+	default 2
+	range 0 9
+
+config SCB1_MI0_SLOT13
+	int "Slot 13 slave interface id"
+	default 3
+	range 0 9
+
+config SCB1_MI0_SLOT14
+	int "Slot 14 slave interface id"
+	default 4
+	range 0 9
+
+config SCB1_MI0_SLOT15
+	int "Slot 15 slave interface id"
+	default 5
+	range 0 9
+
+config SCB1_MI0_SLOT16
+	int "Slot 16 slave interface id"
+	default 6
+	range 0 13
+
+config SCB1_MI0_SLOT17
+	int "Slot 17 slave interface id"
+	default 7
+	range 0 13
+
+config SCB1_MI0_SLOT18
+	int "Slot 18 slave interface id"
+	default 8
+	range 0 13
+
+config SCB1_MI0_SLOT19
+	int "Slot 19 slave interface id"
+	default 9
+	range 0 13
+
+endif # SCB1_MI0
+
+menuconfig	SCB2_MI0
+	bool "SCB2 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	RSI	-- 0
+	SDU DMA	-- 1
+	SDU	-- 2
+	EMAC0	-- 3
+	EMAC1	-- 4
+
+if SCB2_MI0
+
+config SCB2_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 4
+
+config SCB2_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 4
+
+config SCB2_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 4
+
+config SCB2_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 4
+
+config SCB2_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 4
+	range 0 4
+
+config SCB2_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 0
+	range 0 4
+
+config SCB2_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 1
+	range 0 4
+
+config SCB2_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 2
+	range 0 4
+
+config SCB2_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 3
+	range 0 4
+
+config SCB2_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 4
+	range 0 4
+
+endif # SCB2_MI0
+
+menuconfig	SCB3_MI0
+	bool "SCB3 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	LP0	-- 0
+	LP1	-- 1
+	LP2	-- 2
+	LP3	-- 3
+	UART0TX	-- 4
+	UART0RX	-- 5
+	UART1TX	-- 4
+	UART1RX	-- 5
+
+if SCB3_MI0
+
+config SCB3_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 7
+
+config SCB3_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 7
+
+config SCB3_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 7
+
+config SCB3_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 7
+
+config SCB3_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 4
+	range 0 7
+
+config SCB3_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 5
+	range 0 7
+
+config SCB3_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 6
+	range 0 7
+
+config SCB3_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 7
+	range 0 7
+
+config SCB3_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 0
+	range 0 7
+
+config SCB3_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 1
+	range 0 7
+
+config SCB3_MI0_SLOT10
+	int "Slot 10 slave interface id"
+	default 2
+	range 0 7
+
+config SCB3_MI0_SLOT11
+	int "Slot 11 slave interface id"
+	default 3
+	range 0 7
+
+config SCB3_MI0_SLOT12
+	int "Slot 12 slave interface id"
+	default 4
+	range 0 7
+
+config SCB3_MI0_SLOT13
+	int "Slot 13 slave interface id"
+	default 5
+	range 0 7
+
+config SCB3_MI0_SLOT14
+	int "Slot 14 slave interface id"
+	default 6
+	range 0 7
+
+config SCB3_MI0_SLOT15
+	int "Slot 15 slave interface id"
+	default 7
+	range 0 7
+
+endif # SCB3_MI0
+
+menuconfig	SCB4_MI0
+	bool "SCB4 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	MDA21	-- 0
+	MDA22	-- 1
+	MDA23	-- 2
+	MDA24	-- 3
+	MDA25	-- 4
+	MDA26	-- 5
+	MDA27	-- 6
+	MDA28	-- 7
+
+if SCB4_MI0
+
+config SCB4_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 7
+
+config SCB4_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 7
+
+config SCB4_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 7
+
+config SCB4_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 7
+
+config SCB4_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 4
+	range 0 7
+
+config SCB4_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 5
+	range 0 7
+
+config SCB4_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 6
+	range 0 7
+
+config SCB4_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 7
+	range 0 7
+
+config SCB4_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 0
+	range 0 7
+
+config SCB4_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 1
+	range 0 7
+
+config SCB4_MI0_SLOT10
+	int "Slot 10 slave interface id"
+	default 2
+	range 0 7
+
+config SCB4_MI0_SLOT11
+	int "Slot 11 slave interface id"
+	default 3
+	range 0 7
+
+config SCB4_MI0_SLOT12
+	int "Slot 12 slave interface id"
+	default 4
+	range 0 7
+
+config SCB4_MI0_SLOT13
+	int "Slot 13 slave interface id"
+	default 5
+	range 0 7
+
+config SCB4_MI0_SLOT14
+	int "Slot 14 slave interface id"
+	default 6
+	range 0 7
+
+config SCB4_MI0_SLOT15
+	int "Slot 15 slave interface id"
+	default 7
+	range 0 7
+
+endif # SCB4_MI0
+
+menuconfig	SCB5_MI0
+	bool "SCB5 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	PPI0 MDA29	-- 0
+	PPI0 MDA30	-- 1
+	PPI2 MDA31	-- 2
+	PPI2 MDA32	-- 3
+
+if SCB5_MI0
+
+config SCB5_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 3
+
+config SCB5_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 3
+
+config SCB5_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 3
+
+config SCB5_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 3
+
+config SCB5_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 0
+	range 0 3
+
+config SCB5_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 1
+	range 0 3
+
+config SCB5_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 2
+	range 0 3
+
+config SCB5_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 3
+	range 0 3
+
+endif # SCB5_MI0
+
+menuconfig	SCB6_MI0
+	bool "SCB6 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	PPI1 MDA33	-- 0
+	PPI1 MDA34	-- 1
+
+if SCB6_MI0
+
+config SCB6_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 1
+
+config SCB6_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 1
+
+config SCB6_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 0
+	range 0 1
+
+config SCB6_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 1
+	range 0 1
+
+endif # SCB6_MI0
+
+menuconfig	SCB7_MI0
+	bool "SCB7 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	PIXC0	-- 0
+	PIXC1	-- 1
+	PIXC2	-- 2
+
+if SCB7_MI0
+
+config SCB7_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 2
+
+config SCB7_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 2
+
+config SCB7_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 2
+
+config SCB7_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 0
+	range 0 2
+
+config SCB7_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 1
+	range 0 2
+
+config SCB7_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 2
+	range 0 2
+
+endif # SCB7_MI0
+
+menuconfig	SCB8_MI0
+	bool "SCB8 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	PVP CPDOB	-- 0
+	PVP CPDOC	-- 1
+	PVP CPCO	-- 2
+	PVP CPCI	-- 3
+
+if SCB8_MI0
+
+config SCB8_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 3
+
+config SCB8_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 3
+
+config SCB8_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 3
+
+config SCB8_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 3
+
+config SCB8_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 0
+	range 0 3
+
+config SCB8_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 1
+	range 0 3
+
+config SCB8_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 2
+	range 0 3
+
+config SCB8_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 3
+	range 0 3
+
+endif # SCB8_MI0
+
+menuconfig	SCB9_MI0
+	bool "SCB9 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	PVP MPDO	-- 0
+	PVP MPDI	-- 1
+	PVP MPCO	-- 2
+	PVP MPCI	-- 3
+	PVP CPDOA	-- 4
+
+if SCB9_MI0
+
+config SCB9_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 4
+
+config SCB9_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 4
+
+config SCB9_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 4
+
+config SCB9_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 4
+
+config SCB9_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 4
+	range 0 4
+
+config SCB9_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 0
+	range 0 4
+
+config SCB9_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 1
+	range 0 4
+
+config SCB9_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 2
+	range 0 4
+
+config SCB9_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 3
+	range 0 4
+
+config SCB9_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 4
+	range 0 4
+
+endif # SCB9_MI0
+
+endmenu
+
+endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/Makefile
new file mode 100644
index 0000000..60ffaf8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/Makefile
@@ -0,0 +1,7 @@
+#
+# arch/blackfin/mach-bf609/Makefile
+#
+
+obj-y := dma.o clock.o ints-priority.o
+obj-$(CONFIG_PM) += pm.o dpm.o
+obj-$(CONFIG_SCB_PRIORITY) += scb.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/boards/Kconfig b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/boards/Kconfig
new file mode 100644
index 0000000..350154b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/boards/Kconfig
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+choice
+	prompt "System type"
+	default BFIN609_EZKIT
+	help
+	  Select your board!
+
+config BFIN609_EZKIT
+	bool "BF609-EZKIT"
+	help
+	  BFIN609-EZKIT board support.
+	  
+endchoice
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/boards/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/boards/Makefile
new file mode 100644
index 0000000..11f98b0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/boards/Makefile
@@ -0,0 +1,5 @@
+#
+# arch/blackfin/mach-bf609/boards/Makefile
+#
+
+obj-$(CONFIG_BFIN609_EZKIT)            += ezkit.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/boards/ezkit.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/boards/ezkit.c
new file mode 100644
index 0000000..51157a2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/boards/ezkit.c
@@ -0,0 +1,2191 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/usb/musb.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/platform_data/pinctrl-adi2.h>
+#include <linux/spi/adi_spi3.h>
+#include <linux/gpio.h>
+#include <asm/dma.h>
+#include <asm/nand.h>
+#include <asm/dpmc.h>
+#include <asm/portmux.h>
+#include <asm/bfin_sdh.h>
+#include <linux/input.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "ADI BF609-EZKIT";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
+#include <linux/usb/isp1760.h>
+static struct resource bfin_isp1760_resources[] = {
+	[0] = {
+		.start  = 0x2C0C0000,
+		.end    = 0x2C0C0000 + 0xfffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_PG7,
+		.end    = IRQ_PG7,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct isp1760_platform_data isp1760_priv = {
+	.is_isp1761 = 0,
+	.bus_width_16 = 1,
+	.port1_otg = 0,
+	.analog_oc = 0,
+	.dack_polarity_high = 0,
+	.dreq_polarity_high = 0,
+};
+
+static struct platform_device bfin_isp1760_device = {
+	.name           = "isp1760",
+	.id             = 0,
+	.dev = {
+		.platform_data = &isp1760_priv,
+	},
+	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
+	.resource       = bfin_isp1760_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
+#include <linux/platform_data/bfin_rotary.h>
+
+static struct bfin_rotary_platform_data bfin_rotary_data = {
+	/*.rotary_up_key     = KEY_UP,*/
+	/*.rotary_down_key   = KEY_DOWN,*/
+	.rotary_rel_code   = REL_WHEEL,
+	.rotary_button_key = KEY_ENTER,
+	.debounce	   = 10,	/* 0..17 */
+	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
+};
+
+static struct resource bfin_rotary_resources[] = {
+	{
+		.start = CNT_CONFIG,
+		.end   = CNT_CONFIG + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CNT,
+		.end = IRQ_CNT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_rotary_device = {
+	.name		= "bfin-rotary",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bfin_rotary_resources),
+	.resource 	= bfin_rotary_resources,
+	.dev		= {
+		.platform_data = &bfin_rotary_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_STMMAC_ETH)
+#include <linux/stmmac.h>
+#include <linux/phy.h>
+
+static struct stmmac_mdio_bus_data phy_private_data = {
+	.phy_mask = 1,
+};
+
+static struct stmmac_dma_cfg eth_dma_cfg = {
+	.pbl	= 2,
+};
+
+int stmmac_ptp_clk_init(struct platform_device *pdev, void *priv)
+{
+	bfin_write32(PADS0_EMAC_PTP_CLKSEL, 0);
+	return 0;
+}
+
+static struct plat_stmmacenet_data eth_private_data = {
+	.has_gmac = 1,
+	.bus_id   = 0,
+	.enh_desc = 1,
+	.phy_addr = 1,
+	.mdio_bus_data = &phy_private_data,
+	.dma_cfg  = &eth_dma_cfg,
+	.force_thresh_dma_mode = 1,
+	.interface = PHY_INTERFACE_MODE_RMII,
+	.init = stmmac_ptp_clk_init,
+};
+
+static struct platform_device bfin_eth_device = {
+	.name           = "stmmaceth",
+	.id             = 0,
+	.num_resources  = 2,
+	.resource       = (struct resource[]) {
+		{
+			.start  = EMAC0_MACCFG,
+			.end    = EMAC0_MACCFG + 0x1274,
+			.flags  = IORESOURCE_MEM,
+		},
+		{
+			.name   = "macirq",
+			.start  = IRQ_EMAC0_STAT,
+			.end    = IRQ_EMAC0_STAT,
+			.flags  = IORESOURCE_IRQ,
+		},
+	},
+	.dev = {
+		.power.can_wakeup = 1,
+		.platform_data = &eth_private_data,
+	}
+};
+#endif
+
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
+#include <linux/input/adxl34x.h>
+static const struct adxl34x_platform_data adxl34x_info = {
+	.x_axis_offset = 0,
+	.y_axis_offset = 0,
+	.z_axis_offset = 0,
+	.tap_threshold = 0x31,
+	.tap_duration = 0x10,
+	.tap_latency = 0x60,
+	.tap_window = 0xF0,
+	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+	.act_axis_control = 0xFF,
+	.activity_threshold = 5,
+	.inactivity_threshold = 3,
+	.inactivity_time = 4,
+	.free_fall_threshold = 0x7,
+	.free_fall_time = 0x20,
+	.data_rate = 0x8,
+	.data_range = ADXL_FULL_RES,
+
+	.ev_type = EV_ABS,
+	.ev_code_x = ABS_X,		/* EV_REL */
+	.ev_code_y = ABS_Y,		/* EV_REL */
+	.ev_code_z = ABS_Z,		/* EV_REL */
+
+	.ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
+
+/*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
+/*	.ev_code_act_inactivity = KEY_A,*/	/* EV_KEY */
+	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+	.fifo_mode = ADXL_FIFO_STREAM,
+	.orientation_enable = ADXL_EN_ORIENTATION_3D,
+	.deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
+	.divisor_length = ADXL_LP_FILTER_DIVISOR_16,
+	/* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
+	.ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_REVID,
+		.end = UART0_RXDIV+4,
+		.flags = IORESOURCE_MEM,
+	},
+#ifdef CONFIG_EARLY_PRINTK
+	{
+		.start = PORTD_FER,
+		.end = PORTD_FER+2,
+		.flags = IORESOURCE_REG,
+	},
+	{
+		.start = PORTD_MUX,
+		.end = PORTD_MUX+3,
+		.flags = IORESOURCE_REG,
+	},
+#endif
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_STAT,
+		.end = IRQ_UART0_STAT,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+	{	/* CTS pin -- 0 means not supported */
+		.start = GPIO_PD10,
+		.end = GPIO_PD10,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin -- 0 means not supported */
+		.start = GPIO_PD9,
+		.end = GPIO_PD9,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX,
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+	P_UART0_RTS, P_UART0_CTS,
+#endif
+	0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_REVID,
+		.end = UART1_RXDIV+4,
+		.flags = IORESOURCE_MEM,
+	},
+#ifdef CONFIG_EARLY_PRINTK
+	{
+		.start = PORTG_FER_SET,
+		.end = PORTG_FER_SET+2,
+		.flags = IORESOURCE_REG,
+	},
+#endif
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_STAT,
+		.end = IRQ_UART1_STAT,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin -- 0 means not supported */
+		.start = GPIO_PG13,
+		.end = GPIO_PG13,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin -- 0 means not supported */
+		.start = GPIO_PG10,
+		.end = GPIO_PG10,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX,
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	P_UART1_RTS, P_UART1_CTS,
+#endif
+	0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+static struct resource musb_resources[] = {
+	[0] = {
+		.start	= 0xFFCC1000,
+		.end	= 0xFFCC1398,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= IRQ_USB_STAT,
+		.end	= IRQ_USB_STAT,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "mc"
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= IRQ_USB_DMA,
+		.end	= IRQ_USB_DMA,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "dma"
+	},
+};
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 1,
+	.dyn_fifo	= 0,
+	.dma		= 1,
+	.num_eps	= 16,
+	.dma_channels	= 8,
+	.clkin          = 48,           /* musb CLKIN in MHZ */
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_HDRC) && defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.config		= &musb_config,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+	.name		= "musb-blackfin",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+static struct resource bfin_sport2_uart_resources[] = {
+	{
+		.start = SPORT2_TCR1,
+		.end = SPORT2_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT2_RX,
+		.end = IRQ_SPORT2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT2_ERROR,
+		.end = IRQ_SPORT2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport2_peripherals[] = {
+	P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
+	P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
+};
+
+static struct platform_device bfin_sport2_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
+	.resource = bfin_sport2_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_CAN_BFIN)
+
+static unsigned short bfin_can0_peripherals[] = {
+	P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static struct resource bfin_can0_resources[] = {
+	{
+		.start = 0xFFC00A00,
+		.end = 0xFFC00FFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CAN0_RX,
+		.end = IRQ_CAN0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN0_TX,
+		.end = IRQ_CAN0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN0_STAT,
+		.end = IRQ_CAN0_STAT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_can0_device = {
+	.name = "bfin_can",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_can0_resources),
+	.resource = bfin_can0_resources,
+	.dev = {
+		.platform_data = &bfin_can0_peripherals, /* Passed to driver */
+	},
+};
+
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
+static struct mtd_partition partition_info[] = {
+	{
+		.name = "bootloader(nand)",
+		.offset = 0,
+		.size = 0x80000,
+	}, {
+		.name = "linux kernel(nand)",
+		.offset = MTDPART_OFS_APPEND,
+		.size = 4 * 1024 * 1024,
+	},
+	{
+		.name = "file system(nand)",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct bf5xx_nand_platform bfin_nand_platform = {
+	.data_width = NFC_NWIDTH_8,
+	.partitions = partition_info,
+	.nr_partitions = ARRAY_SIZE(partition_info),
+	.rd_dly = 3,
+	.wr_dly = 3,
+};
+
+static struct resource bfin_nand_resources[] = {
+	{
+		.start = 0xFFC03B00,
+		.end = 0xFFC03B4F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_NFC,
+		.end = CH_NFC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_nand_device = {
+	.name = "bfin-nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_nand_resources),
+	.resource = bfin_nand_resources,
+	.dev = {
+		.platform_data = &bfin_nand_platform,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SDH_BFIN)
+
+static struct bfin_sd_host bfin_sdh_data = {
+	.dma_chan = CH_RSI,
+	.irq_int0 = IRQ_RSI_INT0,
+	.pin_req = {P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0},
+};
+
+static struct platform_device bfin_sdh_device = {
+	.name = "bfin-sdh",
+	.id = 0,
+	.dev = {
+		.platform_data = &bfin_sdh_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+static struct mtd_partition ezkit_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x80000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x400000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = 0x1000000 - 0x80000 - 0x400000,
+		.offset     = MTDPART_OFS_APPEND,
+	},
+};
+
+int bf609_nor_flash_init(struct platform_device *pdev)
+{
+#define CONFIG_SMC_GCTL_VAL     0x00000010
+
+	bfin_write32(SMC_GCTL, CONFIG_SMC_GCTL_VAL);
+	bfin_write32(SMC_B0CTL, 0x01002011);
+	bfin_write32(SMC_B0TIM, 0x08170977);
+	bfin_write32(SMC_B0ETIM, 0x00092231);
+	return 0;
+}
+
+void bf609_nor_flash_exit(struct platform_device *pdev)
+{
+	bfin_write32(SMC_GCTL, 0);
+}
+
+static struct physmap_flash_data ezkit_flash_data = {
+	.width      = 2,
+	.parts      = ezkit_partitions,
+	.init       = bf609_nor_flash_init,
+	.exit       = bf609_nor_flash_exit,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
+#ifdef CONFIG_ROMKERNEL
+	.probe_type = "map_rom",
+#endif
+};
+
+static struct resource ezkit_flash_resource = {
+	.start = 0xb0000000,
+	.end   = 0xb0ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezkit_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+/* SPI flash chip (w25q32) */
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00080000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0x00180000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "w25q32",
+};
+
+static struct adi_spi3_chip spi_flash_chip_info = {
+	.enable_dma = true,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+static struct adi_spi3_chip spidev_chip_info = {
+	.enable_dma = true,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF6XX_PCM)
+static struct platform_device bfin_pcm = {
+	.name = "bfin-i2s-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S)
+#include <asm/bfin_sport3.h>
+static struct resource bfin_snd_resources[] = {
+	{
+		.start = SPORT0_CTL_A,
+		.end = SPORT0_CTL_A,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = SPORT0_CTL_B,
+		.end = SPORT0_CTL_B,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_SPORT0_TX,
+		.end = CH_SPORT0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_SPORT0_RX,
+		.end = CH_SPORT0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = IRQ_SPORT0_TX_STAT,
+		.end = IRQ_SPORT0_TX_STAT,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_RX_STAT,
+		.end = IRQ_SPORT0_RX_STAT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static const unsigned short bfin_snd_pin[] = {
+	P_SPORT0_ACLK, P_SPORT0_AFS, P_SPORT0_AD0, P_SPORT0_BCLK,
+	P_SPORT0_BFS, P_SPORT0_BD0, 0,
+};
+
+static struct bfin_snd_platform_data bfin_snd_data = {
+	.pin_req = bfin_snd_pin,
+};
+
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.num_resources = ARRAY_SIZE(bfin_snd_resources),
+	.resource = bfin_snd_resources,
+	.dev = {
+		.platform_data = &bfin_snd_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+static const char * const ad1836_link[] = {
+	"bfin-i2s.0",
+	"spi0.76",
+};
+static struct platform_device bfin_ad1836_machine = {
+	.name = "bfin-snd-ad1836",
+	.id = -1,
+	.dev = {
+		.platform_data = (void *)ad1836_link,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61)
+static struct platform_device adau1761_device = {
+	.name = "bfin-eval-adau1x61",
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761)
+#include <sound/adau17x1.h>
+static struct adau1761_platform_data adau1761_info = {
+	.lineout_mode = ADAU1761_OUTPUT_MODE_LINE,
+	.headphone_mode = ADAU1761_OUTPUT_MODE_HEADPHONE_CAPLESS,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_capture.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req[] = {
+	P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+	P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+	P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
+	P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
+#if !IS_ENABLED(CONFIG_VIDEO_VS6624)
+	P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19,
+	P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23,
+#endif
+	P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+	0,
+};
+
+static const struct ppi_info ppi_info = {
+	.type = PPI_TYPE_EPPI3,
+	.dma_ch = CH_EPPI0_CH0,
+	.irq_err = IRQ_EPPI0_STAT,
+	.base = (void __iomem *)EPPI0_STAT,
+	.pin_req = ppi_req,
+};
+
+#if IS_ENABLED(CONFIG_VIDEO_VS6624)
+static struct v4l2_input vs6624_inputs[] = {
+	{
+		.index = 0,
+		.name = "Camera",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = V4L2_STD_UNKNOWN,
+	},
+};
+
+static struct bcap_route vs6624_routes[] = {
+	{
+		.input = 0,
+		.output = 0,
+	},
+};
+
+static const unsigned vs6624_ce_pin = GPIO_PE4;
+
+static struct bfin_capture_config bfin_capture_data = {
+	.card_name = "BF609",
+	.inputs = vs6624_inputs,
+	.num_inputs = ARRAY_SIZE(vs6624_inputs),
+	.routes = vs6624_routes,
+	.i2c_adapter_id = 0,
+	.board_info = {
+		.type = "vs6624",
+		.addr = 0x10,
+		.platform_data = (void *)&vs6624_ce_pin,
+	},
+	.ppi_info = &ppi_info,
+	.ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FS1HI_FS2HI
+			| EPPI_CTL_POLC3 | EPPI_CTL_SYNC2 | EPPI_CTL_NON656),
+	.blank_pixels = 4,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_VIDEO_ADV7842)
+#include <media/i2c/adv7842.h>
+
+static struct v4l2_input adv7842_inputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = V4L2_STD_ALL,
+		.capabilities = V4L2_IN_CAP_STD,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = V4L2_STD_ALL,
+		.capabilities = V4L2_IN_CAP_STD,
+	},
+	{
+		.index = 2,
+		.name = "Component",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.capabilities = V4L2_IN_CAP_DV_TIMINGS,
+	},
+	{
+		.index = 3,
+		.name = "VGA",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.capabilities = V4L2_IN_CAP_DV_TIMINGS,
+	},
+	{
+		.index = 4,
+		.name = "HDMI",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.capabilities = V4L2_IN_CAP_DV_TIMINGS,
+	},
+};
+
+static struct bcap_route adv7842_routes[] = {
+	{
+		.input = 3,
+		.output = 0,
+		.ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FLDSEL
+				| EPPI_CTL_ACTIVE656),
+	},
+	{
+		.input = 4,
+		.output = 0,
+	},
+	{
+		.input = 2,
+		.output = 0,
+	},
+	{
+		.input = 1,
+		.output = 0,
+	},
+	{
+		.input = 0,
+		.output = 1,
+		.ppi_control = (EPPI_CTL_SPLTWRD | PACK_EN | DLEN_16
+				| EPPI_CTL_FS1LO_FS2LO | EPPI_CTL_POLC2
+				| EPPI_CTL_SYNC2 | EPPI_CTL_NON656),
+	},
+};
+
+static struct adv7842_output_format adv7842_opf[] = {
+	{
+		.op_ch_sel = ADV7842_OP_CH_SEL_BRG,
+		.op_format_sel = ADV7842_OP_FORMAT_SEL_SDR_ITU656_8,
+		.blank_data = 1,
+		.insert_av_codes = 1,
+	},
+	{
+		.op_ch_sel = ADV7842_OP_CH_SEL_RGB,
+		.op_format_sel = ADV7842_OP_FORMAT_SEL_SDR_ITU656_16,
+		.blank_data = 1,
+	},
+};
+
+static struct adv7842_platform_data adv7842_data = {
+	.opf = adv7842_opf,
+	.num_opf = ARRAY_SIZE(adv7842_opf),
+	.ain_sel = ADV7842_AIN10_11_12_NC_SYNC_4_1,
+	.prim_mode = ADV7842_PRIM_MODE_SDP,
+	.vid_std_select = ADV7842_SDP_VID_STD_CVBS_SD_4x1,
+	.hdmi_free_run_enable = 1,
+	.sdp_free_run_auto = 1,
+	.llc_dll_phase = 0x10,
+	.i2c_sdp_io = 0x40,
+	.i2c_sdp = 0x41,
+	.i2c_cp = 0x42,
+	.i2c_vdp = 0x43,
+	.i2c_afe = 0x44,
+	.i2c_hdmi = 0x45,
+	.i2c_repeater = 0x46,
+	.i2c_edid = 0x47,
+	.i2c_infoframe = 0x48,
+	.i2c_cec = 0x49,
+	.i2c_avlink = 0x4a,
+};
+
+static struct bfin_capture_config bfin_capture_data = {
+	.card_name = "BF609",
+	.inputs = adv7842_inputs,
+	.num_inputs = ARRAY_SIZE(adv7842_inputs),
+	.routes = adv7842_routes,
+	.i2c_adapter_id = 0,
+	.board_info = {
+		.type = "adv7842",
+		.addr = 0x20,
+		.platform_data = (void *)&adv7842_data,
+	},
+	.ppi_info = &ppi_info,
+	.ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FLDSEL
+			| EPPI_CTL_ACTIVE656),
+};
+#endif
+
+static struct platform_device bfin_capture_device = {
+	.name = "bfin_capture",
+	.dev = {
+		.platform_data = &bfin_capture_data,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_display.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req_disp[] = {
+	P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+	P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+	P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
+	P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
+	P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+	0,
+};
+
+static const struct ppi_info ppi_info = {
+	.type = PPI_TYPE_EPPI3,
+	.dma_ch = CH_EPPI0_CH0,
+	.irq_err = IRQ_EPPI0_STAT,
+	.base = (void __iomem *)EPPI0_STAT,
+	.pin_req = ppi_req_disp,
+};
+
+#if IS_ENABLED(CONFIG_VIDEO_ADV7511)
+#include <media/i2c/adv7511.h>
+
+static struct v4l2_output adv7511_outputs[] = {
+	{
+		.index = 0,
+		.name = "HDMI",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.capabilities = V4L2_OUT_CAP_DV_TIMINGS,
+	},
+};
+
+static struct disp_route adv7511_routes[] = {
+	{
+		.output = 0,
+	},
+};
+
+static struct adv7511_platform_data adv7511_data = {
+	.edid_addr = 0x7e,
+};
+
+static struct bfin_display_config bfin_display_data = {
+	.card_name = "BF609",
+	.outputs = adv7511_outputs,
+	.num_outputs = ARRAY_SIZE(adv7511_outputs),
+	.routes = adv7511_routes,
+	.i2c_adapter_id = 0,
+	.board_info = {
+		.type = "adv7511",
+		.addr = 0x39,
+		.platform_data = (void *)&adv7511_data,
+	},
+	.ppi_info = &ppi_info,
+	.ppi_control = (EPPI_CTL_SPLTWRD | PACK_EN | DLEN_16
+			| EPPI_CTL_FS1LO_FS2LO | EPPI_CTL_POLC3
+			| EPPI_CTL_IFSGEN | EPPI_CTL_SYNC2
+			| EPPI_CTL_NON656 | EPPI_CTL_DIR),
+};
+#endif
+
+#if IS_ENABLED(CONFIG_VIDEO_ADV7343)
+#include <media/i2c/adv7343.h>
+
+static struct v4l2_output adv7343_outputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_OUTPUT_TYPE_ANALOG,
+		.std = V4L2_STD_ALL,
+		.capabilities = V4L2_OUT_CAP_STD,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_OUTPUT_TYPE_ANALOG,
+		.std = V4L2_STD_ALL,
+		.capabilities = V4L2_OUT_CAP_STD,
+	},
+	{
+		.index = 2,
+		.name = "Component",
+		.type = V4L2_OUTPUT_TYPE_ANALOG,
+		.std = V4L2_STD_ALL,
+		.capabilities = V4L2_OUT_CAP_STD,
+	},
+
+};
+
+static struct disp_route adv7343_routes[] = {
+	{
+		.output = ADV7343_COMPOSITE_ID,
+	},
+	{
+		.output = ADV7343_SVIDEO_ID,
+	},
+	{
+		.output = ADV7343_COMPONENT_ID,
+	},
+};
+
+static struct adv7343_platform_data adv7343_data = {
+	.mode_config = {
+		.sleep_mode = false,
+		.pll_control = false,
+		.dac_1 = true,
+		.dac_2 = true,
+		.dac_3 = true,
+		.dac_4 = true,
+		.dac_5 = true,
+		.dac_6 = true,
+	},
+	.sd_config = {
+		.sd_dac_out1 = false,
+		.sd_dac_out2 = false,
+	},
+};
+
+static struct bfin_display_config bfin_display_data = {
+	.card_name = "BF609",
+	.outputs = adv7343_outputs,
+	.num_outputs = ARRAY_SIZE(adv7343_outputs),
+	.routes = adv7343_routes,
+	.i2c_adapter_id = 0,
+	.board_info = {
+		.type = "adv7343",
+		.addr = 0x2b,
+		.platform_data = (void *)&adv7343_data,
+	},
+	.ppi_info = &ppi_info_disp,
+	.ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FS1LO_FS2LO
+			| EPPI_CTL_POLC3 | EPPI_CTL_BLANKGEN | EPPI_CTL_SYNC2
+			| EPPI_CTL_NON656 | EPPI_CTL_DIR),
+};
+#endif
+
+static struct platform_device bfin_display_device = {
+	.name = "bfin_display",
+	.dev = {
+		.platform_data = &bfin_display_data,
+	},
+};
+#endif
+
+#if defined(CONFIG_FB_BF609_NL8048) \
+	|| defined(CONFIG_FB_BF609_NL8048_MODULE)
+static struct resource nl8048_resources[] = {
+	{
+		.start = EPPI2_STAT,
+		.end = EPPI2_STAT,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_EPPI2_CH0,
+		.end = CH_EPPI2_CH0,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = IRQ_EPPI2_STAT,
+		.end = IRQ_EPPI2_STAT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+static struct platform_device bfin_fb_device = {
+	.name = "bf609_nl8048",
+	.num_resources = ARRAY_SIZE(nl8048_resources),
+	.resource = nl8048_resources,
+	.dev = {
+		.platform_data = (void *)GPIO_PC15,
+	},
+};
+#endif
+
+#if defined(CONFIG_BFIN_CRC)
+#define BFIN_CRC_NAME "bfin-crc"
+
+static struct resource bfin_crc0_resources[] = {
+	{
+		.start = REG_CRC0_CTL,
+		.end = REG_CRC0_REVID+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CRC0_DCNTEXP,
+		.end = IRQ_CRC0_DCNTEXP,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_MEM_STREAM0_SRC_CRC0,
+		.end = CH_MEM_STREAM0_SRC_CRC0,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_MEM_STREAM0_DEST_CRC0,
+		.end = CH_MEM_STREAM0_DEST_CRC0,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_crc0_device = {
+	.name = BFIN_CRC_NAME,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_crc0_resources),
+	.resource = bfin_crc0_resources,
+};
+
+static struct resource bfin_crc1_resources[] = {
+	{
+		.start = REG_CRC1_CTL,
+		.end = REG_CRC1_REVID+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CRC1_DCNTEXP,
+		.end = IRQ_CRC1_DCNTEXP,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_MEM_STREAM1_SRC_CRC1,
+		.end = CH_MEM_STREAM1_SRC_CRC1,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_MEM_STREAM1_DEST_CRC1,
+		.end = CH_MEM_STREAM1_DEST_CRC1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_crc1_device = {
+	.name = BFIN_CRC_NAME,
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_crc1_resources),
+	.resource = bfin_crc1_resources,
+};
+#endif
+
+#if defined(CONFIG_CRYPTO_DEV_BFIN_CRC)
+#define BFIN_CRYPTO_CRC_NAME		"bfin-hmac-crc"
+#define BFIN_CRYPTO_CRC_POLY_DATA	0x5c5c5c5c
+
+static struct resource bfin_crypto_crc_resources[] = {
+	{
+		.start = REG_CRC0_CTL,
+		.end = REG_CRC0_REVID+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CRC0_DCNTEXP,
+		.end = IRQ_CRC0_DCNTEXP,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_MEM_STREAM0_SRC_CRC0,
+		.end = CH_MEM_STREAM0_SRC_CRC0,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_crypto_crc_device = {
+	.name = BFIN_CRYPTO_CRC_NAME,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_crypto_crc_resources),
+	.resource = bfin_crypto_crc_resources,
+	.dev = {
+		.platform_data = (void *)BFIN_CRYPTO_CRC_POLY_DATA,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity 	= 1,
+	.first_conversion_delay = 3,
+	.acquisition_time 	= 1,
+	.averaging 		= 1,
+	.pen_down_acc_interval 	= 1,
+};
+#endif
+
+#ifdef CONFIG_PINCTRL_ADI2
+
+# define ADI_PINT_DEVNAME "adi-gpio-pint"
+# define ADI_GPIO_DEVNAME "adi-gpio"
+# define ADI_PINCTRL_DEVNAME "pinctrl-adi2"
+
+static struct platform_device bfin_pinctrl_device = {
+	.name = ADI_PINCTRL_DEVNAME,
+	.id = 0,
+};
+
+static struct resource bfin_pint0_resources[] = {
+	{
+		.start = PINT0_MASK_SET,
+		.end = PINT0_LATCH + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PINT0,
+		.end = IRQ_PINT0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pint0_device = {
+	.name = ADI_PINT_DEVNAME,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_pint0_resources),
+	.resource = bfin_pint0_resources,
+};
+
+static struct resource bfin_pint1_resources[] = {
+	{
+		.start = PINT1_MASK_SET,
+		.end = PINT1_LATCH + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PINT1,
+		.end = IRQ_PINT1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pint1_device = {
+	.name = ADI_PINT_DEVNAME,
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_pint1_resources),
+	.resource = bfin_pint1_resources,
+};
+
+static struct resource bfin_pint2_resources[] = {
+	{
+		.start = PINT2_MASK_SET,
+		.end = PINT2_LATCH + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PINT2,
+		.end = IRQ_PINT2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pint2_device = {
+	.name = ADI_PINT_DEVNAME,
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_pint2_resources),
+	.resource = bfin_pint2_resources,
+};
+
+static struct resource bfin_pint3_resources[] = {
+	{
+		.start = PINT3_MASK_SET,
+		.end = PINT3_LATCH + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PINT3,
+		.end = IRQ_PINT3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pint3_device = {
+	.name = ADI_PINT_DEVNAME,
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_pint3_resources),
+	.resource = bfin_pint3_resources,
+};
+
+static struct resource bfin_pint4_resources[] = {
+	{
+		.start = PINT4_MASK_SET,
+		.end = PINT4_LATCH + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PINT4,
+		.end = IRQ_PINT4,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pint4_device = {
+	.name = ADI_PINT_DEVNAME,
+	.id = 4,
+	.num_resources = ARRAY_SIZE(bfin_pint4_resources),
+	.resource = bfin_pint4_resources,
+};
+
+static struct resource bfin_pint5_resources[] = {
+	{
+		.start = PINT5_MASK_SET,
+		.end = PINT5_LATCH + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PINT5,
+		.end = IRQ_PINT5,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pint5_device = {
+	.name = ADI_PINT_DEVNAME,
+	.id = 5,
+	.num_resources = ARRAY_SIZE(bfin_pint5_resources),
+	.resource = bfin_pint5_resources,
+};
+
+static struct resource bfin_gpa_resources[] = {
+	{
+		.start = PORTA_FER,
+		.end = PORTA_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{	/* optional */
+		.start = IRQ_PA0,
+		.end = IRQ_PA0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpa_pdata = {
+	.port_pin_base	= GPIO_PA0,
+	.port_width	= GPIO_BANKSIZE,
+	.pint_id	= 0,		/* PINT0 */
+	.pint_assign	= true,		/* PINT upper 16 bit */
+	.pint_map	= 0,		/* mapping mask in PINT */
+};
+
+static struct platform_device bfin_gpa_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_gpa_resources),
+	.resource = bfin_gpa_resources,
+	.dev = {
+		.platform_data = &bfin_gpa_pdata, /* Passed to driver */
+	},
+};
+
+static struct resource bfin_gpb_resources[] = {
+	{
+		.start = PORTB_FER,
+		.end = PORTB_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PB0,
+		.end = IRQ_PB0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpb_pdata = {
+	.port_pin_base	= GPIO_PB0,
+	.port_width	= GPIO_BANKSIZE,
+	.pint_id	= 0,
+	.pint_assign	= false,
+	.pint_map	= 1,
+};
+
+static struct platform_device bfin_gpb_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_gpb_resources),
+	.resource = bfin_gpb_resources,
+	.dev = {
+		.platform_data = &bfin_gpb_pdata, /* Passed to driver */
+	},
+};
+
+static struct resource bfin_gpc_resources[] = {
+	{
+		.start = PORTC_FER,
+		.end = PORTC_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PC0,
+		.end = IRQ_PC0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpc_pdata = {
+	.port_pin_base	= GPIO_PC0,
+	.port_width	= GPIO_BANKSIZE,
+	.pint_id	= 1,
+	.pint_assign	= false,
+	.pint_map	= 1,
+};
+
+static struct platform_device bfin_gpc_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_gpc_resources),
+	.resource = bfin_gpc_resources,
+	.dev = {
+		.platform_data = &bfin_gpc_pdata, /* Passed to driver */
+	},
+};
+
+static struct resource bfin_gpd_resources[] = {
+	{
+		.start = PORTD_FER,
+		.end = PORTD_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PD0,
+		.end = IRQ_PD0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpd_pdata = {
+	.port_pin_base	= GPIO_PD0,
+	.port_width	= GPIO_BANKSIZE,
+	.pint_id	= 2,
+	.pint_assign	= false,
+	.pint_map	= 1,
+};
+
+static struct platform_device bfin_gpd_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_gpd_resources),
+	.resource = bfin_gpd_resources,
+	.dev = {
+		.platform_data = &bfin_gpd_pdata, /* Passed to driver */
+	},
+};
+
+static struct resource bfin_gpe_resources[] = {
+	{
+		.start = PORTE_FER,
+		.end = PORTE_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PE0,
+		.end = IRQ_PE0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpe_pdata = {
+	.port_pin_base	= GPIO_PE0,
+	.port_width	= GPIO_BANKSIZE,
+	.pint_id	= 3,
+	.pint_assign	= false,
+	.pint_map	= 1,
+};
+
+static struct platform_device bfin_gpe_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 4,
+	.num_resources = ARRAY_SIZE(bfin_gpe_resources),
+	.resource = bfin_gpe_resources,
+	.dev = {
+		.platform_data = &bfin_gpe_pdata, /* Passed to driver */
+	},
+};
+
+static struct resource bfin_gpf_resources[] = {
+	{
+		.start = PORTF_FER,
+		.end = PORTF_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PF0,
+		.end = IRQ_PF0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpf_pdata = {
+	.port_pin_base	= GPIO_PF0,
+	.port_width	= GPIO_BANKSIZE,
+	.pint_id	= 4,
+	.pint_assign	= false,
+	.pint_map	= 1,
+};
+
+static struct platform_device bfin_gpf_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 5,
+	.num_resources = ARRAY_SIZE(bfin_gpf_resources),
+	.resource = bfin_gpf_resources,
+	.dev = {
+		.platform_data = &bfin_gpf_pdata, /* Passed to driver */
+	},
+};
+
+static struct resource bfin_gpg_resources[] = {
+	{
+		.start = PORTG_FER,
+		.end = PORTG_MUX + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PG0,
+		.end = IRQ_PG0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpg_pdata = {
+	.port_pin_base	= GPIO_PG0,
+	.port_width	= GPIO_BANKSIZE,
+	.pint_id	= 5,
+	.pint_assign	= false,
+	.pint_map	= 1,
+};
+
+static struct platform_device bfin_gpg_device = {
+	.name = ADI_GPIO_DEVNAME,
+	.id = 6,
+	.num_resources = ARRAY_SIZE(bfin_gpg_resources),
+	.resource = bfin_gpg_resources,
+	.dev = {
+		.platform_data = &bfin_gpg_pdata, /* Passed to driver */
+	},
+};
+
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PB10, 1, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PE1, 1, "gpio-keys: BTN1"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = MAX_CTRL_CS + GPIO_PD11, /* SPI_SSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PD9,
+		.max_speed_hz		= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num		= 0,
+		.chip_select		= MAX_CTRL_CS + GPIO_PC15, /* SPI_SSEL4 */
+	},
+#endif
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = MAX_CTRL_CS + GPIO_PD11, /* SPI_SSEL1*/
+		.controller_data = &spidev_chip_info,
+	},
+#endif
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI)
+	{
+		.modalias		= "adxl34x",
+		.platform_data		= &adxl34x_info,
+		.irq			= IRQ_PC5,
+		.max_speed_hz		= 5000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num		= 1,
+		.chip_select  		= 2,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+#if IS_ENABLED(CONFIG_SPI_ADI_V3)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	{
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_SPI0_TX,
+		.end   = CH_SPI0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_SPI0_RX,
+		.end   = CH_SPI0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+/* SPI (1) */
+static struct resource bfin_spi1_resource[] = {
+	{
+		.start = SPI1_REGBASE,
+		.end   = SPI1_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_SPI1_TX,
+		.end   = CH_SPI1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_SPI1_RX,
+		.end   = CH_SPI1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+
+};
+
+/* SPI controller data */
+static struct adi_spi3_master bf60x_spi_master_info0 = {
+	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bf60x_spi_master0 = {
+	.name = "adi-spi3",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bf60x_spi_master_info0, /* Passed to driver */
+	},
+};
+
+static struct adi_spi3_master bf60x_spi_master_info1 = {
+	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
+	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
+};
+
+static struct platform_device bf60x_spi_master1 = {
+	.name = "adi-spi3",
+	.id = 1, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi1_resource),
+	.resource = bfin_spi1_resource,
+	.dev = {
+		.platform_data = &bf60x_spi_master_info1, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
+
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_CLKDIV,
+		.end   = TWI0_CLKDIV + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI0,
+		.end   = IRQ_TWI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi0_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+	.dev = {
+		.platform_data = &bfin_twi0_pins,
+	},
+};
+
+static const u16 bfin_twi1_pins[] = {P_TWI1_SCL, P_TWI1_SDA, 0};
+
+static struct resource bfin_twi1_resource[] = {
+	[0] = {
+		.start = TWI1_CLKDIV,
+		.end   = TWI1_CLKDIV + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI1,
+		.end   = IRQ_TWI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi1_device = {
+	.name = "i2c-bfin-twi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_twi1_resource),
+	.resource = bfin_twi1_resource,
+	.dev = {
+		.platform_data = &bfin_twi1_pins,
+	},
+};
+#endif
+
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
+#include <linux/spi/mcp23s08.h>
+static const struct mcp23s08_platform_data bfin_mcp23s08_soft_switch0 = {
+	.base = 120,
+};
+static const struct mcp23s08_platform_data bfin_mcp23s08_soft_switch1 = {
+	.base = 130,
+};
+static const struct mcp23s08_platform_data bfin_mcp23s08_soft_switch2 = {
+	.base = 140,
+};
+# if IS_ENABLED(CONFIG_VIDEO_ADV7842)
+static const struct mcp23s08_platform_data bfin_adv7842_soft_switch = {
+	.base = 150,
+};
+# endif
+# if IS_ENABLED(CONFIG_VIDEO_ADV7511) || IS_ENABLED(CONFIG_VIDEO_ADV7343)
+static const struct mcp23s08_platform_data bfin_adv7511_soft_switch = {
+	.base = 160,
+};
+# endif
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
+	{
+		I2C_BOARD_INFO("adxl34x", 0x53),
+		.irq = IRQ_PC5,
+		.platform_data = (void *)&adxl34x_info,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761)
+	{
+		I2C_BOARD_INFO("adau1761", 0x38),
+		.platform_data = (void *)&adau1761_info
+	},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
+	{
+		I2C_BOARD_INFO("ssm2602", 0x1b),
+	},
+#endif
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
+	{
+		I2C_BOARD_INFO("mcp23017", 0x21),
+		.platform_data = (void *)&bfin_mcp23s08_soft_switch0
+	},
+	{
+		I2C_BOARD_INFO("mcp23017", 0x22),
+		.platform_data = (void *)&bfin_mcp23s08_soft_switch1
+	},
+	{
+		I2C_BOARD_INFO("mcp23017", 0x23),
+		.platform_data = (void *)&bfin_mcp23s08_soft_switch2
+	},
+# if IS_ENABLED(CONFIG_VIDEO_ADV7842)
+	{
+		I2C_BOARD_INFO("mcp23017", 0x26),
+		.platform_data = (void *)&bfin_adv7842_soft_switch
+	},
+# endif
+# if IS_ENABLED(CONFIG_VIDEO_ADV7511) || IS_ENABLED(CONFIG_VIDEO_ADV7343)
+	{
+		I2C_BOARD_INFO("mcp23017", 0x25),
+		.platform_data = (void *)&bfin_adv7511_soft_switch
+	},
+# endif
+#endif
+};
+
+static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
+};
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+/*
+ * Internal VLEV BF54XSBBC1533
+ ****temporarily using these values until data sheet is updated
+ */
+	VRPAIR(VLEV_085, 150000000),
+	VRPAIR(VLEV_090, 250000000),
+	VRPAIR(VLEV_110, 276000000),
+	VRPAIR(VLEV_115, 301000000),
+	VRPAIR(VLEV_120, 525000000),
+	VRPAIR(VLEV_125, 550000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *ezkit_devices[] __initdata = {
+
+	&bfin_dpmc,
+#if defined(CONFIG_PINCTRL_ADI2)
+	&bfin_pinctrl_device,
+	&bfin_pint0_device,
+	&bfin_pint1_device,
+	&bfin_pint2_device,
+	&bfin_pint3_device,
+	&bfin_pint4_device,
+	&bfin_pint5_device,
+	&bfin_gpa_device,
+	&bfin_gpb_device,
+	&bfin_gpc_device,
+	&bfin_gpd_device,
+	&bfin_gpe_device,
+	&bfin_gpf_device,
+	&bfin_gpg_device,
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+	&rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_STMMAC_ETH)
+	&bfin_eth_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+	&musb_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
+	&bfin_isp1760_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_CAN_BFIN)
+	&bfin_can0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
+	&bfin_nand_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SDH_BFIN)
+	&bfin_sdh_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_ADI_V3)
+	&bf60x_spi_master0,
+	&bf60x_spi_master1,
+#endif
+
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
+	&bfin_rotary_device,
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
+	&i2c_bfin_twi0_device,
+#if !defined(CONFIG_BF542)
+	&i2c_bfin_twi1_device,
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_CRC)
+	&bfin_crc0_device,
+	&bfin_crc1_device,
+#endif
+#if defined(CONFIG_CRYPTO_DEV_BFIN_CRC)
+	&bfin_crypto_crc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+	&bfin_device_gpiokeys,
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
+	&ezkit_flash_device,
+#endif
+#if IS_ENABLED(CONFIG_SND_BF6XX_PCM)
+	&bfin_pcm,
+#endif
+#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S)
+	&bfin_i2s,
+#endif
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+	&bfin_ad1836_machine,
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61)
+	&adau1761_device,
+#endif
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
+	&bfin_capture_device,
+#endif
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY)
+	&bfin_display_device,
+#endif
+
+};
+
+/* Pin control settings */
+static struct pinctrl_map __initdata bfin_pinmux_map[] = {
+	/* per-device maps */
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.0",  "pinctrl-adi2.0", NULL, "uart0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1",  "pinctrl-adi2.0", NULL, "uart1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.0",  "pinctrl-adi2.0", NULL, "uart0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1",  "pinctrl-adi2.0", NULL, "uart1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0",  "pinctrl-adi2.0", NULL, "rsi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("stmmaceth.0",  "pinctrl-adi2.0", NULL, "eth0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.0",  "pinctrl-adi2.0", NULL, "spi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.1",  "pinctrl-adi2.0", NULL, "spi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0",  "pinctrl-adi2.0", NULL, "twi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1",  "pinctrl-adi2.0", NULL, "twi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary",  "pinctrl-adi2.0", NULL, "rotary"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0",  "pinctrl-adi2.0", NULL, "can0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("physmap-flash.0",  "pinctrl-adi2.0", NULL, "smc0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.0",  "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"),
+	PIN_MAP_MUX_GROUP("bfin_display.0", "8bit",  "pinctrl-adi2.0", "ppi2_8bgrp", "ppi2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin_display.0",  "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"),
+	PIN_MAP_MUX_GROUP("bfin_display.0", "16bit",  "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"),
+	PIN_MAP_MUX_GROUP("bfin_capture.0", "8bit",  "pinctrl-adi2.0", "ppi0_8bgrp", "ppi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0",  "pinctrl-adi2.0", "ppi0_16bgrp", "ppi0"),
+	PIN_MAP_MUX_GROUP("bfin_capture.0", "16bit",  "pinctrl-adi2.0", "ppi0_16bgrp", "ppi0"),
+	PIN_MAP_MUX_GROUP("bfin_capture.0", "24bit",  "pinctrl-adi2.0", "ppi0_24bgrp", "ppi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0",  "pinctrl-adi2.0", NULL, "sport0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0",  "pinctrl-adi2.0", NULL, "sport0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.1",  "pinctrl-adi2.0", NULL, "sport1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.1",  "pinctrl-adi2.0", NULL, "sport1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.2",  "pinctrl-adi2.0", NULL, "sport2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.2",  "pinctrl-adi2.0", NULL, "sport2"),
+};
+
+static int __init ezkit_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+	/* Initialize pinmuxing */
+	pinctrl_register_mappings(bfin_pinmux_map,
+				ARRAY_SIZE(bfin_pinmux_map));
+
+	i2c_register_board_info(0, bfin_i2c_board_info0,
+				ARRAY_SIZE(bfin_i2c_board_info0));
+	i2c_register_board_info(1, bfin_i2c_board_info1,
+				ARRAY_SIZE(bfin_i2c_board_info1));
+
+	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
+
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
+	return 0;
+}
+
+arch_initcall(ezkit_init);
+
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/clock.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/clock.c
new file mode 100644
index 0000000..16e0b09
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/clock.c
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <linux/seq_file.h>
+#include <linux/clkdev.h>
+
+#include <asm/clocks.h>
+
+#define CGU0_CTL_DF (1 << 0)
+
+#define CGU0_CTL_MSEL_SHIFT 8
+#define CGU0_CTL_MSEL_MASK (0x7f << 8)
+
+#define CGU0_STAT_PLLEN (1 << 0)
+#define CGU0_STAT_PLLBP (1 << 1)
+#define CGU0_STAT_PLLLK (1 << 2)
+#define CGU0_STAT_CLKSALGN (1 << 3)
+#define CGU0_STAT_CCBF0 (1 << 4)
+#define CGU0_STAT_CCBF1 (1 << 5)
+#define CGU0_STAT_SCBF0 (1 << 6)
+#define CGU0_STAT_SCBF1 (1 << 7)
+#define CGU0_STAT_DCBF (1 << 8)
+#define CGU0_STAT_OCBF (1 << 9)
+#define CGU0_STAT_ADDRERR (1 << 16)
+#define CGU0_STAT_LWERR (1 << 17)
+#define CGU0_STAT_DIVERR (1 << 18)
+#define CGU0_STAT_WDFMSERR (1 << 19)
+#define CGU0_STAT_WDIVERR (1 << 20)
+#define CGU0_STAT_PLOCKERR (1 << 21)
+
+#define CGU0_DIV_CSEL_SHIFT 0
+#define CGU0_DIV_CSEL_MASK 0x0000001F
+#define CGU0_DIV_S0SEL_SHIFT 5
+#define CGU0_DIV_S0SEL_MASK (0x3 << CGU0_DIV_S0SEL_SHIFT)
+#define CGU0_DIV_SYSSEL_SHIFT 8
+#define CGU0_DIV_SYSSEL_MASK (0x1f << CGU0_DIV_SYSSEL_SHIFT)
+#define CGU0_DIV_S1SEL_SHIFT 13
+#define CGU0_DIV_S1SEL_MASK (0x3 << CGU0_DIV_S1SEL_SHIFT)
+#define CGU0_DIV_DSEL_SHIFT 16
+#define CGU0_DIV_DSEL_MASK (0x1f << CGU0_DIV_DSEL_SHIFT)
+#define CGU0_DIV_OSEL_SHIFT 22
+#define CGU0_DIV_OSEL_MASK (0x7f << CGU0_DIV_OSEL_SHIFT)
+
+#define CLK(_clk, _devname, _conname)                   \
+	{                                               \
+		.clk    = &_clk,                  \
+		.dev_id = _devname,                     \
+		.con_id = _conname,                     \
+	}
+
+#define NEEDS_INITIALIZATION 0x11
+
+static LIST_HEAD(clk_list);
+
+static void clk_reg_write_mask(u32 reg, uint32_t val, uint32_t mask)
+{
+	u32 val2;
+
+	val2 = bfin_read32(reg);
+	val2 &= ~mask;
+	val2 |= val;
+	bfin_write32(reg, val2);
+}
+
+int wait_for_pll_align(void)
+{
+	int i = 10000;
+	while (i-- && (bfin_read32(CGU0_STAT) & CGU0_STAT_CLKSALGN));
+
+	if (bfin_read32(CGU0_STAT) & CGU0_STAT_CLKSALGN) {
+		printk(KERN_CRIT "fail to align clk\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+int clk_enable(struct clk *clk)
+{
+	int ret = -EIO;
+	if (clk->ops && clk->ops->enable)
+		ret = clk->ops->enable(clk);
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	if (!clk)
+		return;
+
+	if (clk->ops && clk->ops->disable)
+		clk->ops->disable(clk);
+}
+EXPORT_SYMBOL(clk_disable);
+
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	unsigned long ret = 0;
+	if (clk->ops && clk->ops->get_rate)
+		ret = clk->ops->get_rate(clk);
+	return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	long ret = 0;
+	if (clk->ops && clk->ops->round_rate)
+		ret = clk->ops->round_rate(clk, rate);
+	return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EIO;
+	if (clk->ops && clk->ops->set_rate)
+		ret = clk->ops->set_rate(clk, rate);
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+unsigned long vco_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+unsigned long pll_get_rate(struct clk *clk)
+{
+	u32 df;
+	u32 msel;
+	u32 ctl = bfin_read32(CGU0_CTL);
+	u32 stat = bfin_read32(CGU0_STAT);
+	if (stat & CGU0_STAT_PLLBP)
+		return 0;
+	msel = (ctl & CGU0_CTL_MSEL_MASK) >> CGU0_CTL_MSEL_SHIFT;
+	df = (ctl &  CGU0_CTL_DF);
+	clk->parent->rate = clk_get_rate(clk->parent);
+	return clk->parent->rate / (df + 1) * msel * 2;
+}
+
+unsigned long pll_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 div;
+	div = rate / clk->parent->rate;
+	return clk->parent->rate * div;
+}
+
+int pll_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 msel;
+	u32 stat = bfin_read32(CGU0_STAT);
+	if (!(stat & CGU0_STAT_PLLEN))
+		return -EBUSY;
+	if (!(stat & CGU0_STAT_PLLLK))
+		return -EBUSY;
+	if (wait_for_pll_align())
+		return -EBUSY;
+	msel = rate / clk->parent->rate / 2;
+	clk_reg_write_mask(CGU0_CTL, msel << CGU0_CTL_MSEL_SHIFT,
+		CGU0_CTL_MSEL_MASK);
+	clk->rate = rate;
+	return 0;
+}
+
+unsigned long cclk_get_rate(struct clk *clk)
+{
+	if (clk->parent)
+		return clk->parent->rate;
+	else
+		return 0;
+}
+
+unsigned long sys_clk_get_rate(struct clk *clk)
+{
+	unsigned long drate;
+	u32 msel;
+	u32 df;
+	u32 ctl = bfin_read32(CGU0_CTL);
+	u32 div = bfin_read32(CGU0_DIV);
+	div = (div & clk->mask) >> clk->shift;
+	msel = (ctl & CGU0_CTL_MSEL_MASK) >> CGU0_CTL_MSEL_SHIFT;
+	df = (ctl &  CGU0_CTL_DF);
+
+	if (!strcmp(clk->parent->name, "SYS_CLKIN")) {
+		drate = clk->parent->rate / (df + 1);
+		drate *=  msel;
+		drate /= div;
+		return drate;
+	} else {
+		clk->parent->rate = clk_get_rate(clk->parent);
+		return clk->parent->rate / div;
+	}
+}
+
+unsigned long dummy_get_rate(struct clk *clk)
+{
+	clk->parent->rate = clk_get_rate(clk->parent);
+	return clk->parent->rate;
+}
+
+unsigned long sys_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long max_rate;
+	unsigned long drate;
+	int i;
+	u32 msel;
+	u32 df;
+	u32 ctl = bfin_read32(CGU0_CTL);
+
+	msel = (ctl & CGU0_CTL_MSEL_MASK) >> CGU0_CTL_MSEL_SHIFT;
+	df = (ctl &  CGU0_CTL_DF);
+	max_rate = clk->parent->rate / (df + 1) * msel;
+
+	if (rate > max_rate)
+		return 0;
+
+	for (i = 1; i < clk->mask; i++) {
+		drate = max_rate / i;
+		if (rate >= drate)
+			return drate;
+	}
+	return 0;
+}
+
+int sys_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 div = bfin_read32(CGU0_DIV);
+	div = (div & clk->mask) >> clk->shift;
+
+	rate = clk_round_rate(clk, rate);
+
+	if (!rate)
+		return -EINVAL;
+
+	div = (clk_get_rate(clk) * div) / rate;
+
+	if (wait_for_pll_align())
+		return -EBUSY;
+	clk_reg_write_mask(CGU0_DIV, div << clk->shift,
+			clk->mask);
+	clk->rate = rate;
+	return 0;
+}
+
+static struct clk_ops vco_ops = {
+	.get_rate = vco_get_rate,
+};
+
+static struct clk_ops pll_ops = {
+	.get_rate = pll_get_rate,
+	.set_rate = pll_set_rate,
+};
+
+static struct clk_ops cclk_ops = {
+	.get_rate = cclk_get_rate,
+};
+
+static struct clk_ops sys_clk_ops = {
+	.get_rate = sys_clk_get_rate,
+	.set_rate = sys_clk_set_rate,
+	.round_rate = sys_clk_round_rate,
+};
+
+static struct clk_ops dummy_clk_ops = {
+	.get_rate = dummy_get_rate,
+};
+
+static struct clk sys_clkin = {
+	.name       = "SYS_CLKIN",
+	.rate       = CONFIG_CLKIN_HZ,
+	.ops        = &vco_ops,
+};
+
+static struct clk pll_clk = {
+	.name       = "PLLCLK",
+	.rate       = 500000000,
+	.parent     = &sys_clkin,
+	.ops = &pll_ops,
+	.flags = NEEDS_INITIALIZATION,
+};
+
+static struct clk cclk = {
+	.name       = "CCLK",
+	.rate       = 500000000,
+	.mask       = CGU0_DIV_CSEL_MASK,
+	.shift      = CGU0_DIV_CSEL_SHIFT,
+	.parent     = &sys_clkin,
+	.ops	    = &sys_clk_ops,
+	.flags = NEEDS_INITIALIZATION,
+};
+
+static struct clk cclk0 = {
+	.name       = "CCLK0",
+	.parent     = &cclk,
+	.ops	    = &cclk_ops,
+};
+
+static struct clk cclk1 = {
+	.name       = "CCLK1",
+	.parent     = &cclk,
+	.ops	    = &cclk_ops,
+};
+
+static struct clk sysclk = {
+	.name       = "SYSCLK",
+	.rate       = 500000000,
+	.mask       = CGU0_DIV_SYSSEL_MASK,
+	.shift      = CGU0_DIV_SYSSEL_SHIFT,
+	.parent     = &sys_clkin,
+	.ops	    = &sys_clk_ops,
+	.flags = NEEDS_INITIALIZATION,
+};
+
+static struct clk sclk0 = {
+	.name       = "SCLK0",
+	.rate       = 500000000,
+	.mask       = CGU0_DIV_S0SEL_MASK,
+	.shift      = CGU0_DIV_S0SEL_SHIFT,
+	.parent     = &sysclk,
+	.ops	    = &sys_clk_ops,
+};
+
+static struct clk sclk1 = {
+	.name       = "SCLK1",
+	.rate       = 500000000,
+	.mask       = CGU0_DIV_S1SEL_MASK,
+	.shift      = CGU0_DIV_S1SEL_SHIFT,
+	.parent     = &sysclk,
+	.ops	    = &sys_clk_ops,
+};
+
+static struct clk dclk = {
+	.name       = "DCLK",
+	.rate       = 500000000,
+	.mask       = CGU0_DIV_DSEL_MASK,
+	.shift       = CGU0_DIV_DSEL_SHIFT,
+	.parent     = &sys_clkin,
+	.ops	    = &sys_clk_ops,
+};
+
+static struct clk oclk = {
+	.name       = "OCLK",
+	.rate       = 500000000,
+	.mask       = CGU0_DIV_OSEL_MASK,
+	.shift      = CGU0_DIV_OSEL_SHIFT,
+	.parent     = &pll_clk,
+};
+
+static struct clk ethclk = {
+	.name       = "stmmaceth",
+	.parent     = &sclk0,
+	.ops	    = &dummy_clk_ops,
+};
+
+static struct clk ethpclk = {
+	.name       = "pclk",
+	.parent     = &sclk0,
+	.ops	    = &dummy_clk_ops,
+};
+
+static struct clk spiclk = {
+	.name       = "spi",
+	.parent     = &sclk1,
+	.ops        = &dummy_clk_ops,
+};
+
+static struct clk_lookup bf609_clks[] = {
+	CLK(sys_clkin, NULL, "SYS_CLKIN"),
+	CLK(pll_clk, NULL, "PLLCLK"),
+	CLK(cclk, NULL, "CCLK"),
+	CLK(cclk0, NULL, "CCLK0"),
+	CLK(cclk1, NULL, "CCLK1"),
+	CLK(sysclk, NULL, "SYSCLK"),
+	CLK(sclk0, NULL, "SCLK0"),
+	CLK(sclk1, NULL, "SCLK1"),
+	CLK(dclk, NULL, "DCLK"),
+	CLK(oclk, NULL, "OCLK"),
+	CLK(ethclk, NULL, "stmmaceth"),
+	CLK(ethpclk, NULL, "pclk"),
+	CLK(spiclk, NULL, "spi"),
+};
+
+int __init clk_init(void)
+{
+	int i;
+	struct clk *clkp;
+	for (i = 0; i < ARRAY_SIZE(bf609_clks); i++) {
+		clkp = bf609_clks[i].clk;
+		if (clkp->flags & NEEDS_INITIALIZATION)
+			clk_get_rate(clkp);
+	}
+	clkdev_add_table(bf609_clks, ARRAY_SIZE(bf609_clks));
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/dma.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/dma.c
new file mode 100644
index 0000000..1da4b38
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/dma.c
@@ -0,0 +1,202 @@
+/*
+ * the simple DMA Implementation for Blackfin
+ *
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS] = {
+	(struct dma_register *) DMA0_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_NEXT_DESC_PTR,
+	(struct dma_register *) DMA3_NEXT_DESC_PTR,
+	(struct dma_register *) DMA4_NEXT_DESC_PTR,
+	(struct dma_register *) DMA5_NEXT_DESC_PTR,
+	(struct dma_register *) DMA6_NEXT_DESC_PTR,
+	(struct dma_register *) DMA7_NEXT_DESC_PTR,
+	(struct dma_register *) DMA8_NEXT_DESC_PTR,
+	(struct dma_register *) DMA9_NEXT_DESC_PTR,
+	(struct dma_register *) DMA10_NEXT_DESC_PTR,
+	(struct dma_register *) DMA11_NEXT_DESC_PTR,
+	(struct dma_register *) DMA12_NEXT_DESC_PTR,
+	(struct dma_register *) DMA13_NEXT_DESC_PTR,
+	(struct dma_register *) DMA14_NEXT_DESC_PTR,
+	(struct dma_register *) DMA15_NEXT_DESC_PTR,
+	(struct dma_register *) DMA16_NEXT_DESC_PTR,
+	(struct dma_register *) DMA17_NEXT_DESC_PTR,
+	(struct dma_register *) DMA18_NEXT_DESC_PTR,
+	(struct dma_register *) DMA19_NEXT_DESC_PTR,
+	(struct dma_register *) DMA20_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA0_SRC_CRC0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA0_DEST_CRC0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA1_SRC_CRC1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA1_DEST_CRC1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA2_SRC_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA2_DEST_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA3_SRC_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA3_DEST_NEXT_DESC_PTR,
+	(struct dma_register *) DMA29_NEXT_DESC_PTR,
+	(struct dma_register *) DMA30_NEXT_DESC_PTR,
+	(struct dma_register *) DMA31_NEXT_DESC_PTR,
+	(struct dma_register *) DMA32_NEXT_DESC_PTR,
+	(struct dma_register *) DMA33_NEXT_DESC_PTR,
+	(struct dma_register *) DMA34_NEXT_DESC_PTR,
+	(struct dma_register *) DMA35_NEXT_DESC_PTR,
+	(struct dma_register *) DMA36_NEXT_DESC_PTR,
+	(struct dma_register *) DMA37_NEXT_DESC_PTR,
+	(struct dma_register *) DMA38_NEXT_DESC_PTR,
+	(struct dma_register *) DMA39_NEXT_DESC_PTR,
+	(struct dma_register *) DMA40_NEXT_DESC_PTR,
+	(struct dma_register *) DMA41_NEXT_DESC_PTR,
+	(struct dma_register *) DMA42_NEXT_DESC_PTR,
+	(struct dma_register *) DMA43_NEXT_DESC_PTR,
+	(struct dma_register *) DMA44_NEXT_DESC_PTR,
+	(struct dma_register *) DMA45_NEXT_DESC_PTR,
+	(struct dma_register *) DMA46_NEXT_DESC_PTR,
+};
+EXPORT_SYMBOL(dma_io_base_addr);
+
+int channel2irq(unsigned int channel)
+{
+	int ret_irq = -1;
+
+	switch (channel) {
+	case CH_SPORT0_RX:
+		ret_irq = IRQ_SPORT0_RX;
+		break;
+	case CH_SPORT0_TX:
+		ret_irq = IRQ_SPORT0_TX;
+		break;
+	case CH_SPORT1_RX:
+		ret_irq = IRQ_SPORT1_RX;
+		break;
+	case CH_SPORT1_TX:
+		ret_irq = IRQ_SPORT1_TX;
+		break;
+	case CH_SPORT2_RX:
+		ret_irq = IRQ_SPORT2_RX;
+		break;
+	case CH_SPORT2_TX:
+		ret_irq = IRQ_SPORT2_TX;
+		break;
+	case CH_SPI0_TX:
+		ret_irq = IRQ_SPI0_TX;
+		break;
+	case CH_SPI0_RX:
+		ret_irq = IRQ_SPI0_RX;
+		break;
+	case CH_SPI1_TX:
+		ret_irq = IRQ_SPI1_TX;
+		break;
+	case CH_SPI1_RX:
+		ret_irq = IRQ_SPI1_RX;
+		break;
+	case CH_RSI:
+		ret_irq = IRQ_RSI;
+		break;
+	case CH_SDU:
+		ret_irq = IRQ_SDU;
+		break;
+	case CH_LP0:
+		ret_irq = IRQ_LP0;
+		break;
+	case CH_LP1:
+		ret_irq = IRQ_LP1;
+		break;
+	case CH_LP2:
+		ret_irq = IRQ_LP2;
+		break;
+	case CH_LP3:
+		ret_irq = IRQ_LP3;
+		break;
+	case CH_UART0_RX:
+		ret_irq = IRQ_UART0_RX;
+		break;
+	case CH_UART0_TX:
+		ret_irq = IRQ_UART0_TX;
+		break;
+	case CH_UART1_RX:
+		ret_irq = IRQ_UART1_RX;
+		break;
+	case CH_UART1_TX:
+		ret_irq = IRQ_UART1_TX;
+		break;
+	case CH_EPPI0_CH0:
+		ret_irq = IRQ_EPPI0_CH0;
+		break;
+	case CH_EPPI0_CH1:
+		ret_irq = IRQ_EPPI0_CH1;
+		break;
+	case CH_EPPI1_CH0:
+		ret_irq = IRQ_EPPI1_CH0;
+		break;
+	case CH_EPPI1_CH1:
+		ret_irq = IRQ_EPPI1_CH1;
+		break;
+	case CH_EPPI2_CH0:
+		ret_irq = IRQ_EPPI2_CH0;
+		break;
+	case CH_EPPI2_CH1:
+		ret_irq = IRQ_EPPI2_CH1;
+		break;
+	case CH_PIXC_CH0:
+		ret_irq = IRQ_PIXC_CH0;
+		break;
+	case CH_PIXC_CH1:
+		ret_irq = IRQ_PIXC_CH1;
+		break;
+	case CH_PIXC_CH2:
+		ret_irq = IRQ_PIXC_CH2;
+		break;
+	case CH_PVP_CPDOB:
+		ret_irq = IRQ_PVP_CPDOB;
+		break;
+	case CH_PVP_CPDOC:
+		ret_irq = IRQ_PVP_CPDOC;
+		break;
+	case CH_PVP_CPSTAT:
+		ret_irq = IRQ_PVP_CPSTAT;
+		break;
+	case CH_PVP_CPCI:
+		ret_irq = IRQ_PVP_CPCI;
+		break;
+	case CH_PVP_MPDO:
+		ret_irq = IRQ_PVP_MPDO;
+		break;
+	case CH_PVP_MPDI:
+		ret_irq = IRQ_PVP_MPDI;
+		break;
+	case CH_PVP_MPSTAT:
+		ret_irq = IRQ_PVP_MPSTAT;
+		break;
+	case CH_PVP_MPCI:
+		ret_irq = IRQ_PVP_MPCI;
+		break;
+	case CH_PVP_CPDOA:
+		ret_irq = IRQ_PVP_CPDOA;
+		break;
+	case CH_MEM_STREAM0_SRC:
+	case CH_MEM_STREAM0_DEST:
+		ret_irq = IRQ_MDMAS0;
+		break;
+	case CH_MEM_STREAM1_SRC:
+	case CH_MEM_STREAM1_DEST:
+		ret_irq = IRQ_MDMAS1;
+		break;
+	case CH_MEM_STREAM2_SRC:
+	case CH_MEM_STREAM2_DEST:
+		ret_irq = IRQ_MDMAS2;
+		break;
+	case CH_MEM_STREAM3_SRC:
+	case CH_MEM_STREAM3_DEST:
+		ret_irq = IRQ_MDMAS3;
+		break;
+	}
+	return ret_irq;
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/dpm.S b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/dpm.S
new file mode 100644
index 0000000..fcb8f68
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/dpm.S
@@ -0,0 +1,158 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#include <asm/dpmc.h>
+
+#include <asm/context.S>
+
+#define PM_STACK   (COREA_L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
+
+.section .l1.text
+ENTRY(_enter_hibernate)
+	/* switch stack to L1 scratch, prepare for ddr srfr */
+	P0.H = HI(PM_STACK);
+	P0.L = LO(PM_STACK);
+	SP = P0;
+
+	call _bf609_ddr_sr;
+	call _bfin_hibernate_syscontrol;
+
+	P0.H = HI(DPM0_RESTORE4);
+	P0.L = LO(DPM0_RESTORE4);
+	P1.H = _bf609_pm_data;
+	P1.L = _bf609_pm_data;
+	[P0] = P1;
+
+	P0.H = HI(DPM0_CTL);
+	P0.L = LO(DPM0_CTL);
+	R3.H = HI(0x00000010);
+	R3.L = LO(0x00000010);
+
+	bfin_init_pm_bench_cycles;
+
+	[P0] = R3;
+
+	SSYNC;
+ENDPROC(_enter_hibernate)
+
+/* DPM wake up interrupt won't wake up core on bf60x if its core IMASK
+ * is disabled. This behavior differ from bf5xx serial processor.
+ */
+ENTRY(_dummy_deepsleep)
+	[--sp] = SYSCFG;
+	[--sp] = (R7:0,P5:0);
+	cli r0;
+
+	/* get wake up interrupt ID */
+	P0.l = LO(SEC_SCI_BASE + SEC_CSID);
+	P0.h = HI(SEC_SCI_BASE + SEC_CSID);
+	R0 = [P0];
+
+	/* ACK wake up interrupt in SEC */
+	P1.l = LO(SEC_END);
+	P1.h = HI(SEC_END);
+
+	[P1] = R0;
+	SSYNC;
+
+	/* restore EVT 11 entry */
+	p0.h = hi(EVT11);
+	p0.l = lo(EVT11);
+	p1.h = _evt_evt11;
+	p1.l = _evt_evt11;
+
+	[p0] = p1;
+	SSYNC;
+
+	(R7:0,P5:0) = [sp++];
+	SYSCFG = [sp++];
+	RTI;
+ENDPROC(_dummy_deepsleep)
+
+ENTRY(_enter_deepsleep)
+	LINK 0xC;
+	[--sp] = (R7:0,P5:0);
+
+	/* Change EVT 11 entry to dummy handler for wake up event */
+	p0.h = hi(EVT11);
+	p0.l = lo(EVT11);
+	p1.h = _dummy_deepsleep;
+	p1.l = _dummy_deepsleep;
+
+	[p0] = p1;
+
+	P0.H = HI(PM_STACK);
+	P0.L = LO(PM_STACK);
+
+	EX_SCRATCH_REG = SP;
+	SP = P0;
+
+	SSYNC;
+
+	/* should put ddr to self refresh mode before sleep */
+	call _bf609_ddr_sr;
+
+	/* Set DPM controller to deep sleep mode */
+	P0.H = HI(DPM0_CTL);
+	P0.L = LO(DPM0_CTL);
+	R3.H = HI(0x00000008);
+	R3.L = LO(0x00000008);
+	[P0] = R3;
+	CSYNC;
+
+	/* Enable evt 11 in IMASK before idle, otherwise core doesn't wake up. */
+	r0.l = 0x800;
+	r0.h = 0;
+	sti r0;
+	SSYNC;
+
+	bfin_init_pm_bench_cycles;
+
+	/* Fall into deep sleep in idle*/
+	idle;
+	SSYNC;
+
+	/* Restore PLL after wake up from deep sleep */
+	call _bf609_resume_ccbuf;
+
+	/* turn ddr out of self refresh mode */
+	call _bf609_ddr_sr_exit;
+
+	SP = EX_SCRATCH_REG;
+
+	(R7:0,P5:0) = [SP++];
+	UNLINK;
+	RTS;
+ENDPROC(_enter_deepsleep)
+
+.section .text
+ENTRY(_bf609_hibernate)
+	bfin_cpu_reg_save;
+	bfin_core_mmr_save;
+
+	P0.H = _bf609_pm_data;
+	P0.L = _bf609_pm_data;
+	R1.H = 0xDEAD;
+	R1.L = 0xBEEF;
+	R2.H = .Lpm_resume_here;
+	R2.L = .Lpm_resume_here;
+	[P0++] = R1;
+	[P0++] = R2;
+	[P0++] = SP;
+
+	P1.H = _enter_hibernate;
+	P1.L = _enter_hibernate;
+
+	call (P1);
+.Lpm_resume_here:
+
+	bfin_core_mmr_restore;
+	bfin_cpu_reg_restore;
+
+	[--sp] = RETI;  /* Clear Global Interrupt Disable */
+	SP += 4;
+
+	RTS;
+
+ENDPROC(_bf609_hibernate)
+
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/anomaly.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/anomaly.h
new file mode 100644
index 0000000..696786e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/anomaly.h
@@ -0,0 +1,137 @@
+/*
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
+ *
+ * Copyright 2004-2012 Analog Devices Inc.
+ * Licensed under the Clear BSD license.
+ */
+
+/* This file should be up to date with:
+ *  - Revision A, 15/06/2012; ADSP-BF609 Blackfin Processor Anomaly List
+ */
+
+#if __SILICON_REVISION__ < 0
+# error will not work on BF609 silicon version
+#endif
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* TRU_STAT.ADDRERR and TRU_ERRADDR.ADDR May Not Reflect the Correct Status */
+#define ANOMALY_16000003 (1)
+/* The EPPI Data Enable (DEN) Signal is Not Functional */
+#define ANOMALY_16000004 (__SILICON_REVISION__ < 1)
+/* Using L1 Instruction Cache with Parity Enabled is Unreliable */
+#define ANOMALY_16000005 (__SILICON_REVISION__ < 1)
+/* SEQSTAT.SYSNMI Clears Upon Entering the NMI ISR */
+#define ANOMALY_16000006 (__SILICON_REVISION__ < 1)
+/* DDR2 Memory Reads May Fail Intermittently */
+#define ANOMALY_16000007 (1)
+/* Instruction Memory Stalls Can Cause IFLUSH to Fail */
+#define ANOMALY_16000008 (1)
+/* TestSET Instruction Cannot Be Interrupted */
+#define ANOMALY_16000009 (1)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_16000010 (1)
+/* False Hardware Error when RETI Points to Invalid Memory */
+#define ANOMALY_16000011 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
+#define ANOMALY_16000012 (1)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_16000013 (1)
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_16000014 (1)
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define ANOMALY_16000015 (1)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_16000017 (1)
+/* RSI Boot Cleanup Routine Does Not Clear Registers */
+#define ANOMALY_16000018 (__SILICON_REVISION__ < 1)
+/* SPI Master Boot Device Auto-detection Frequency is Set Incorrectly */
+#define ANOMALY_16000019 (__SILICON_REVISION__ < 1)
+/* rom_SysControl() Fails to Set DDR0_CTL.INIT for Wakeup From Hibernate */
+#define ANOMALY_16000020 (__SILICON_REVISION__ < 1)
+/* rom_SysControl() Fails to Save and Restore DDR0_PHYCTL3 for Hibernate/Wakeup Sequence */
+#define ANOMALY_16000021 (__SILICON_REVISION__ < 1)
+/* Boot Code Fails to Enable Parity Fault Detection */
+#define ANOMALY_16000022 (__SILICON_REVISION__ < 1)
+/* Rom_SysControl Does not Update CGU0_CLKOUTSEL */
+#define ANOMALY_16000023 (__SILICON_REVISION__ < 1)
+/* Spurious Fault Signaled After Clearing an Externally Generated Fault */
+#define ANOMALY_16000024 (1)
+/* SPORT May Drive Data Pins During Inactive Channels in Multichannel Mode */
+#define ANOMALY_16000025 (1)
+/* USB DMA interrupt status do not show the DMA channel interrupt in the DMA ISR */
+#define ANOMALY_16000027 (__SILICON_REVISION__ < 1)
+/* Default SPI Master Boot Mode Setting is Incorrect */
+#define ANOMALY_16000028 (__SILICON_REVISION__ < 1)
+/* PPI tDFSPI Timing Does Not Meet Data Sheet Specification */
+#define ANOMALY_16000027 (__SILICON_REVISION__ < 1)
+/* Interrupted Core Reads of MMRs May Cause Data Loss */
+#define ANOMALY_16000030 (__SILICON_REVISION__ < 1)
+/* Incorrect Default USB_PLL_OSC.PLLM Value */
+#define ANOMALY_16000031 (__SILICON_REVISION__ < 1)
+/* Core Reads of System MMRs May Cause the Core to Hang */
+#define ANOMALY_16000032 (__SILICON_REVISION__ < 1)
+/* PPI Data Underflow on First Word Not Reported in Certain Modes */
+#define ANOMALY_16000033 (1)
+/* CNV1 Red Pixel Substitution feature not functional in the PVP */
+#define ANOMALY_16000034 (__SILICON_REVISION__ < 1)
+/* IPF0 Output Port Color Separation feature not functional */
+#define ANOMALY_16000035 (__SILICON_REVISION__ < 1)
+/* Spurious USB Wake From Hibernate May Occur When USB_VBUS is Low */
+#define ANOMALY_16000036 (__SILICON_REVISION__ < 1)
+/* Core RAISE 2 Instruction Not Latched When Executed at Priority Level 0, 1, or 2 */
+#define ANOMALY_16000037 (__SILICON_REVISION__ < 1)
+/* Spurious Unhandled NMI or L1 Memory Parity Error Interrupt May Occur Upon Entering the NMI ISR */
+#define ANOMALY_16000038 (__SILICON_REVISION__ < 1)
+/* CGU_STAT.PLOCKERR Bit May be Unreliable */
+#define ANOMALY_16000039 (1)
+/* JTAG Emulator Reads of SDU_IDCODE Alter Register Contents */
+#define ANOMALY_16000040 (1)
+/* IFLUSH Instruction Causes Parity Error When Parity Is Enabled */
+#define ANOMALY_16000041 (1)
+/* Instruction Cache Failure When Parity Is Enabled */
+#define ANOMALY_16000042 (__SILICON_REVISION__ == 1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000158 (0)
+#define ANOMALY_05000189 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000244 (0)
+#define ANOMALY_05000263 (0)
+#define ANOMALY_05000273 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000278 (0)
+#define ANOMALY_05000281 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000311 (0)
+#define ANOMALY_05000312 (0)
+#define ANOMALY_05000323 (0)
+#define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
+#define ANOMALY_05000448 (0)
+#define ANOMALY_05000450 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000480 (0)
+#define ANOMALY_05000481 (1)
+
+/* Reuse BF5xx anomalies IDs for the same anomaly in BF60x */
+#define ANOMALY_05000491 ANOMALY_16000008
+#define ANOMALY_05000477 ANOMALY_16000009
+#define ANOMALY_05000443 ANOMALY_16000010
+#define ANOMALY_05000461 ANOMALY_16000011
+#define ANOMALY_05000426 ANOMALY_16000012
+#define ANOMALY_05000310 ANOMALY_16000013
+#define ANOMALY_05000245 ANOMALY_16000014
+#define ANOMALY_05000074 ANOMALY_16000015
+#define ANOMALY_05000416 ANOMALY_16000017
+
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/bf609.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/bf609.h
new file mode 100644
index 0000000..c897c2a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/bf609.h
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __MACH_BF609_H__
+#define __MACH_BF609_H__
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15		0x8000
+#define IMASK_IVG14		0x4000
+#define IMASK_IVG13		0x2000
+#define IMASK_IVG12		0x1000
+
+#define IMASK_IVG11		0x0800
+#define IMASK_IVG10		0x0400
+#define IMASK_IVG9		0x0200
+#define IMASK_IVG8		0x0100
+
+#define IMASK_IVG7		0x0080
+#define IMASK_IVGTMR		0x0040
+#define IMASK_IVGHW		0x0020
+
+/***************************/
+
+
+#define BFIN_DSUBBANKS		4
+#define BFIN_DWAYS		2
+#define BFIN_DLINES		64
+#define BFIN_ISUBBANKS		4
+#define BFIN_IWAYS		4
+#define BFIN_ILINES		32
+
+#define WAY0_L			0x1
+#define WAY1_L			0x2
+#define WAY01_L			0x3
+#define WAY2_L			0x4
+#define WAY02_L			0x5
+#define	WAY12_L			0x6
+#define	WAY012_L		0x7
+
+#define	WAY3_L			0x8
+#define	WAY03_L			0x9
+#define	WAY13_L			0xA
+#define	WAY013_L		0xB
+
+#define	WAY32_L			0xC
+#define	WAY320_L		0xD
+#define	WAY321_L		0xE
+#define	WAYALL_L		0xF
+
+#define DMC_ENABLE (2<<2)	/*yes, 2, not 1 */
+
+/********************************* EBIU Settings ************************************/
+#define AMBCTL0VAL	((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL	((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#ifdef CONFIG_C_AMBEN_ALL
+#define V_AMBEN AMBEN_ALL
+#endif
+#ifdef CONFIG_C_AMBEN
+#define V_AMBEN 0x0
+#endif
+#ifdef CONFIG_C_AMBEN_B0
+#define V_AMBEN AMBEN_B0
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1
+#define V_AMBEN AMBEN_B0_B1
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1_B2
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+
+#define AMGCTLVAL	(V_AMBEN | V_AMCKEN)
+
+#if defined(CONFIG_BF609)
+# define CPU   "BF609"
+# define CPUID 0x27fe	/* temperary fake value */
+#endif
+
+#ifndef CPU
+#error "Unknown CPU type - This kernel doesn't seem to be configured properly"
+#endif
+
+#endif	/* __MACH_BF609_H__  */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/bfin_serial.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/bfin_serial.h
new file mode 100644
index 0000000..1fd3981
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/bfin_serial.h
@@ -0,0 +1,17 @@
+/*
+ * mach/bfin_serial.h - Blackfin UART/Serial definitions
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_SERIAL_H__
+#define __BFIN_MACH_SERIAL_H__
+
+#define BFIN_UART_NR_PORTS	2
+#define BFIN_UART_TX_FIFO_SIZE	8
+
+#define BFIN_UART_BF60X_STYLE
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/blackfin.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/blackfin.h
new file mode 100644
index 0000000..b1a48c4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/blackfin.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#include "bf609.h"
+#include "anomaly.h"
+
+#include <asm/def_LPBlackfin.h>
+#ifdef CONFIG_BF609
+# include "defBF609.h"
+#endif
+
+#ifndef __ASSEMBLY__
+# include <asm/cdef_LPBlackfin.h>
+# ifdef CONFIG_BF609
+#  include "cdefBF609.h"
+# endif
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/cdefBF609.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/cdefBF609.h
new file mode 100644
index 0000000..c4f3fe1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/cdefBF609.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _CDEF_BF609_H
+#define _CDEF_BF609_H
+
+/* include cdefBF60x_base.h for the set of #defines that are common to all ADSP-BF60x bfin_read_()rocessors */
+#include "cdefBF60x_base.h"
+
+/* The following are the #defines needed by ADSP-BF609 that are not in the common header */
+
+#endif /* _CDEF_BF609_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h
new file mode 100644
index 0000000..102ee40
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h
@@ -0,0 +1,3254 @@
+/*
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _CDEF_BF60X_H
+#define _CDEF_BF60X_H
+
+/* ************************************************************** */
+/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF60x    */
+/* ************************************************************** */
+
+/* Debug/MP/Emulation Registers (0xFFC00014 - 0xFFC00014) */
+
+#define bfin_read_CHIPID()		bfin_read32(CHIPID)
+#define bfin_write_CHIPID(val)		bfin_write32(CHIPID, val)
+
+/* System Reset and Interrubfin_read_()t Controller (0xFFC00100 - 0xFFC00104) */
+
+/* SEC0 Registers */
+#define bfin_read_SEC0_CCTL()		bfin_read32(SEC0_CCTL)
+#define bfin_write_SEC0_CCTL(val)	bfin_write32(SEC0_CCTL, val)
+#define bfin_read_SEC0_CSID()		bfin_read32(SEC0_CSID)
+#define bfin_write_SEC0_CSID(val)	bfin_write32(SEC0_CSID, val)
+#define bfin_read_SEC_GCTL()		bfin_read32(SEC_GCTL)
+#define bfin_write_SEC_GCTL(val)	bfin_write32(SEC_GCTL, val)
+
+#define bfin_read_SEC_FCTL()		bfin_read32(SEC_FCTL)
+#define bfin_write_SEC_FCTL(val)	bfin_write32(SEC_FCTL, val)
+
+#define bfin_read_SEC_SCTL(sid)		bfin_read32((SEC_SCTL0 + (sid) * 8))
+#define bfin_write_SEC_SCTL(sid, val)	bfin_write32((SEC_SCTL0 + (sid) * 8), val)
+
+#define bfin_read_SEC_SSTAT(sid)	bfin_read32((SEC_SSTAT0 + (sid) * 8))
+#define bfin_write_SEC_SSTAT(sid, val)	bfin_write32((SEC_SSTAT0 + (sid) * 8), val)
+
+/* RCU0 Registers */
+#define bfin_read_RCU0_CTL()		bfin_read32(RCU0_CTL)
+#define bfin_write_RCU0_CTL(val)	bfin_write32(RCU0_CTL, val)
+
+/* Watchdog Timer Registers */
+#define bfin_read_WDOG_CTL()		bfin_read16(WDOG_CTL)
+#define bfin_write_WDOG_CTL(val)	bfin_write16(WDOG_CTL, val)
+#define bfin_read_WDOG_CNT()		bfin_read32(WDOG_CNT)
+#define bfin_write_WDOG_CNT(val)	bfin_write32(WDOG_CNT, val)
+#define bfin_read_WDOG_STAT()		bfin_read32(WDOG_STAT)
+#define bfin_write_WDOG_STAT(val)	bfin_write32(WDOG_STAT, val)
+
+/* RTC Registers */
+
+/* UART0 Registers */
+
+#define bfin_read_UART0_REVID()		bfin_read32(UART0_REVID)
+#define bfin_write_UART0_REVID(val)	bfin_write32(UART0_REVID, val)
+#define bfin_read_UART0_GCTL()		bfin_read32(UART0_GCTL)
+#define bfin_write_UART0_GCTL(val)	bfin_write32(UART0_GCTL, val)
+#define bfin_read_UART0_STAT()		bfin_read32(UART0_STAT)
+#define bfin_write_UART0_STAT(val)	bfin_write32(UART0_STAT, val)
+#define bfin_read_UART0_SCR()		bfin_read32(UART0_SCR)
+#define bfin_write_UART0_SCR(val)	bfin_write32(UART0_SCR, val)
+#define bfin_read_UART0_CLK()		bfin_read32(UART0_CLK)
+#define bfin_write_UART0_CLK(val)	bfin_write32(UART0_CLK, val)
+#define bfin_read_UART0_IER()		bfin_read32(UART0_IER)
+#define bfin_write_UART0_IER(val)	bfin_write32(UART0_IER, val)
+#define bfin_read_UART0_IER_SET()	bfin_read32(UART0_IER_SET)
+#define bfin_write_UART0_IER_SET(val)	bfin_write32(UART0_IER_SET, val)
+#define bfin_read_UART0_IER_CLEAR()	bfin_read32(UART0_IER_CLEAR)
+#define bfin_write_UART0_IER_CLEAR(val)	bfin_write32(UART0_IER_CLEAR, val)
+#define bfin_read_UART0_RBR()		bfin_read32(UART0_RBR)
+#define bfin_write_UART0_RBR(val)	bfin_write32(UART0_RBR, val)
+#define bfin_read_UART0_THR()		bfin_read32(UART0_THR)
+#define bfin_write_UART0_THR(val)	bfin_write32(UART0_THR, val)
+#define bfin_read_UART0_TAIP()		bfin_read32(UART0_TAIP)
+#define bfin_write_UART0_TAIP(val)	bfin_write32(UART0_TAIP, val)
+#define bfin_read_UART0_TSR()		bfin_read32(UART0_TSR)
+#define bfin_write_UART0_TSR(val)	bfin_write32(UART0_TSR, val)
+#define bfin_read_UART0_RSR()		bfin_read32(UART0_RSR)
+#define bfin_write_UART0_RSR(val)	bfin_write32(UART0_RSR, val)
+#define bfin_read_UART0_TXCNT()		bfin_read32(UART0_TXCNT)
+#define bfin_write_UART0_TXCNT(val)	bfin_write32(UART0_TXCNT, val)
+#define bfin_read_UART0_RXCNT()		bfin_read32(UART0_RXCNT)
+#define bfin_write_UART0_RXCNT(val)	bfin_write32(UART0_RXCNT, val)
+
+/* UART1 Registers */
+
+#define bfin_read_UART1_REVID()		bfin_read32(UART1_REVID)
+#define bfin_write_UART1_REVID(val)	bfin_write32(UART1_REVID, val)
+#define bfin_read_UART1_GCTL()		bfin_read32(UART1_GCTL)
+#define bfin_write_UART1_GCTL(val)	bfin_write32(UART1_GCTL, val)
+#define bfin_read_UART1_STAT()		bfin_read32(UART1_STAT)
+#define bfin_write_UART1_STAT(val)	bfin_write32(UART1_STAT, val)
+#define bfin_read_UART1_SCR()		bfin_read32(UART1_SCR)
+#define bfin_write_UART1_SCR(val)	bfin_write32(UART1_SCR, val)
+#define bfin_read_UART1_CLK()		bfin_read32(UART1_CLK)
+#define bfin_write_UART1_CLK(val)	bfin_write32(UART1_CLK, val)
+#define bfin_read_UART1_IER()		bfin_read32(UART1_IER)
+#define bfin_write_UART1_IER(val)	bfin_write32(UART1_IER, val)
+#define bfin_read_UART1_IER_SET()	bfin_read32(UART1_IER_SET)
+#define bfin_write_UART1_IER_SET(val)	bfin_write32(UART1_IER_SET, val)
+#define bfin_read_UART1_IER_CLEAR()	bfin_read32(UART1_IER_CLEAR)
+#define bfin_write_UART1_IER_CLEAR(val)	bfin_write32(UART1_IER_CLEAR, val)
+#define bfin_read_UART1_RBR()		bfin_read32(UART1_RBR)
+#define bfin_write_UART1_RBR(val)	bfin_write32(UART1_RBR, val)
+#define bfin_read_UART1_THR()		bfin_read32(UART1_THR)
+#define bfin_write_UART1_THR(val)	bfin_write32(UART1_THR, val)
+#define bfin_read_UART1_TAIP()		bfin_read32(UART1_TAIP)
+#define bfin_write_UART1_TAIP(val)	bfin_write32(UART1_TAIP, val)
+#define bfin_read_UART1_TSR()		bfin_read32(UART1_TSR)
+#define bfin_write_UART1_TSR(val)	bfin_write32(UART1_TSR, val)
+#define bfin_read_UART1_RSR()		bfin_read32(UART1_RSR)
+#define bfin_write_UART1_RSR(val)	bfin_write32(UART1_RSR, val)
+#define bfin_read_UART1_TXCNT()		bfin_read32(UART1_TXCNT)
+#define bfin_write_UART1_TXCNT(val)	bfin_write32(UART1_TXCNT, val)
+#define bfin_read_UART1_RXCNT()		bfin_read32(UART1_RXCNT)
+#define bfin_write_UART1_RXCNT(val)	bfin_write32(UART1_RXCNT, val)
+
+
+/* SPI0 Registers */
+
+#define bfin_read_SPI0_CTL()		bfin_read32(SPI0_CTL)
+#define bfin_write_SPI0_CTL(val)	bfin_write32(SPI0_CTL, val)
+#define bfin_read_SPI0_RXCTL()		bfin_read32(SPI0_RXCTL)
+#define bfin_write_SPI0_RXCTL(val)	bfin_write32(SPI0_RXCTL, val)
+#define bfin_read_SPI0_TXCTL()		bfin_read32(SPI0_TXCTL)
+#define bfin_write_SPI0_TXCTL(val)	bfin_write32(SPI0_TXCTL, val)
+#define bfin_read_SPI0_CLK()		bfin_read32(SPI0_CLK)
+#define bfin_write_SPI0_CLK(val)	bfin_write32(SPI0_CLK, val)
+#define bfin_read_SPI0_DLY()		bfin_read32(SPI0_DLY)
+#define bfin_write_SPI0_DLY(val)	bfin_write32(SPI0_DLY, val)
+#define bfin_read_SPI0_SLVSEL()		bfin_read32(SPI0_SLVSEL)
+#define bfin_write_SPI0_SLVSEL(val)	bfin_write32(SPI0_SLVSEL, val)
+#define bfin_read_SPI0_RWC()		bfin_read32(SPI0_RWC)
+#define bfin_write_SPI0_RWC(val)	bfin_write32(SPI0_RWC, val)
+#define bfin_read_SPI0_RWCR()		bfin_read32(SPI0_RWCR)
+#define bfin_write_SPI0_RWCR(val)	bfin_write32(SPI0_RWCR, val)
+#define bfin_read_SPI0_TWC()		bfin_read32(SPI0_TWC)
+#define bfin_write_SPI0_TWC(val)	bfin_write32(SPI0_TWC, val)
+#define bfin_read_SPI0_TWCR()		bfin_read32(SPI0_TWCR)
+#define bfin_write_SPI0_TWCR(val)	bfin_write32(SPI0_TWCR, val)
+#define bfin_read_SPI0_IMSK()		bfin_read32(SPI0_IMSK)
+#define bfin_write_SPI0_IMSK(val)	bfin_write32(SPI0_IMSK, val)
+#define bfin_read_SPI0_IMSK_CLR()	bfin_read32(SPI0_IMSK_CLR)
+#define bfin_write_SPI0_IMSK_CLR(val)	bfin_write32(SPI0_IMSK_CLR, val)
+#define bfin_read_SPI0_IMSK_SET()	bfin_read32(SPI0_IMSK_SET)
+#define bfin_write_SPI0_IMSK_SET(val)	bfin_write32(SPI0_IMSK_SET, val)
+#define bfin_read_SPI0_STAT()		bfin_read32(SPI0_STAT)
+#define bfin_write_SPI0_STAT(val)	bfin_write32(SPI0_STAT, val)
+#define bfin_read_SPI0_ILAT()		bfin_read32(SPI0_ILAT)
+#define bfin_write_SPI0_ILAT(val)	bfin_write32(SPI0_ILAT, val)
+#define bfin_read_SPI0_ILAT_CLR()	bfin_read32(SPI0_ILAT_CLR)
+#define bfin_write_SPI0_ILAT_CLR(val)	bfin_write32(SPI0_ILAT_CLR, val)
+#define bfin_read_SPI0_RFIFO()		bfin_read32(SPI0_RFIFO)
+#define bfin_write_SPI0_RFIFO(val)	bfin_write32(SPI0_RFIFO, val)
+#define bfin_read_SPI0_TFIFO()		bfin_read32(SPI0_TFIFO)
+#define bfin_write_SPI0_TFIFO(val)	bfin_write32(SPI0_TFIFO, val)
+
+/* SPI1 Registers */
+
+#define bfin_read_SPI1_CTL()		bfin_read32(SPI1_CTL)
+#define bfin_write_SPI1_CTL(val)	bfin_write32(SPI1_CTL, val)
+#define bfin_read_SPI1_RXCTL()		bfin_read32(SPI1_RXCTL)
+#define bfin_write_SPI1_RXCTL(val)	bfin_write32(SPI1_RXCTL, val)
+#define bfin_read_SPI1_TXCTL()		bfin_read32(SPI1_TXCTL)
+#define bfin_write_SPI1_TXCTL(val)	bfin_write32(SPI1_TXCTL, val)
+#define bfin_read_SPI1_CLK()		bfin_read32(SPI1_CLK)
+#define bfin_write_SPI1_CLK(val)	bfin_write32(SPI1_CLK, val)
+#define bfin_read_SPI1_DLY()		bfin_read32(SPI1_DLY)
+#define bfin_write_SPI1_DLY(val)	bfin_write32(SPI1_DLY, val)
+#define bfin_read_SPI1_SLVSEL()		bfin_read32(SPI1_SLVSEL)
+#define bfin_write_SPI1_SLVSEL(val)	bfin_write32(SPI1_SLVSEL, val)
+#define bfin_read_SPI1_RWC()		bfin_read32(SPI1_RWC)
+#define bfin_write_SPI1_RWC(val)	bfin_write32(SPI1_RWC, val)
+#define bfin_read_SPI1_RWCR()		bfin_read32(SPI1_RWCR)
+#define bfin_write_SPI1_RWCR(val)	bfin_write32(SPI1_RWCR, val)
+#define bfin_read_SPI1_TWC()		bfin_read32(SPI1_TWC)
+#define bfin_write_SPI1_TWC(val)	bfin_write32(SPI1_TWC, val)
+#define bfin_read_SPI1_TWCR()		bfin_read32(SPI1_TWCR)
+#define bfin_write_SPI1_TWCR(val)	bfin_write32(SPI1_TWCR, val)
+#define bfin_read_SPI1_IMSK()		bfin_read32(SPI1_IMSK)
+#define bfin_write_SPI1_IMSK(val)	bfin_write32(SPI1_IMSK, val)
+#define bfin_read_SPI1_IMSK_CLR()	bfin_read32(SPI1_IMSK_CLR)
+#define bfin_write_SPI1_IMSK_CLR(val)	bfin_write32(SPI1_IMSK_CLR, val)
+#define bfin_read_SPI1_IMSK_SET()	bfin_read32(SPI1_IMSK_SET)
+#define bfin_write_SPI1_IMSK_SET(val)	bfin_write32(SPI1_IMSK_SET, val)
+#define bfin_read_SPI1_STAT()		bfin_read32(SPI1_STAT)
+#define bfin_write_SPI1_STAT(val)	bfin_write32(SPI1_STAT, val)
+#define bfin_read_SPI1_ILAT()		bfin_read32(SPI1_ILAT)
+#define bfin_write_SPI1_ILAT(val)	bfin_write32(SPI1_ILAT, val)
+#define bfin_read_SPI1_ILAT_CLR()	bfin_read32(SPI1_ILAT_CLR)
+#define bfin_write_SPI1_ILAT_CLR(val)	bfin_write32(SPI1_ILAT_CLR, val)
+#define bfin_read_SPI1_RFIFO()		bfin_read32(SPI1_RFIFO)
+#define bfin_write_SPI1_RFIFO(val)	bfin_write32(SPI1_RFIFO, val)
+#define bfin_read_SPI1_TFIFO()		bfin_read32(SPI1_TFIFO)
+#define bfin_write_SPI1_TFIFO(val)	bfin_write32(SPI1_TFIFO, val)
+
+/* Timer 0-7 registers */
+#define bfin_read_TIMER0_CONFIG()            bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val)        bfin_write16(TIMER0_CONFIG, val)
+#define bfin_read_TIMER0_COUNTER()           bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val)       bfin_write32(TIMER0_COUNTER, val)
+#define bfin_read_TIMER0_PERIOD()            bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val)        bfin_write32(TIMER0_PERIOD, val)
+#define bfin_read_TIMER0_WIDTH()             bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val)         bfin_write32(TIMER0_WIDTH, val)
+#define bfin_read_TIMER1_CONFIG()            bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val)        bfin_write16(TIMER1_CONFIG, val)
+#define bfin_read_TIMER1_COUNTER()           bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val)       bfin_write32(TIMER1_COUNTER, val)
+#define bfin_read_TIMER1_PERIOD()            bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val)        bfin_write32(TIMER1_PERIOD, val)
+#define bfin_read_TIMER1_WIDTH()             bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val)         bfin_write32(TIMER1_WIDTH, val)
+#define bfin_read_TIMER2_CONFIG()            bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val)        bfin_write16(TIMER2_CONFIG, val)
+#define bfin_read_TIMER2_COUNTER()           bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val)       bfin_write32(TIMER2_COUNTER, val)
+#define bfin_read_TIMER2_PERIOD()            bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val)        bfin_write32(TIMER2_PERIOD, val)
+#define bfin_read_TIMER2_WIDTH()             bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val)         bfin_write32(TIMER2_WIDTH, val)
+#define bfin_read_TIMER3_CONFIG()            bfin_read16(TIMER3_CONFIG)
+#define bfin_write_TIMER3_CONFIG(val)        bfin_write16(TIMER3_CONFIG, val)
+#define bfin_read_TIMER3_COUNTER()           bfin_read32(TIMER3_COUNTER)
+#define bfin_write_TIMER3_COUNTER(val)       bfin_write32(TIMER3_COUNTER, val)
+#define bfin_read_TIMER3_PERIOD()            bfin_read32(TIMER3_PERIOD)
+#define bfin_write_TIMER3_PERIOD(val)        bfin_write32(TIMER3_PERIOD, val)
+#define bfin_read_TIMER3_WIDTH()             bfin_read32(TIMER3_WIDTH)
+#define bfin_write_TIMER3_WIDTH(val)         bfin_write32(TIMER3_WIDTH, val)
+#define bfin_read_TIMER4_CONFIG()            bfin_read16(TIMER4_CONFIG)
+#define bfin_write_TIMER4_CONFIG(val)        bfin_write16(TIMER4_CONFIG, val)
+#define bfin_read_TIMER4_COUNTER()           bfin_read32(TIMER4_COUNTER)
+#define bfin_write_TIMER4_COUNTER(val)       bfin_write32(TIMER4_COUNTER, val)
+#define bfin_read_TIMER4_PERIOD()            bfin_read32(TIMER4_PERIOD)
+#define bfin_write_TIMER4_PERIOD(val)        bfin_write32(TIMER4_PERIOD, val)
+#define bfin_read_TIMER4_WIDTH()             bfin_read32(TIMER4_WIDTH)
+#define bfin_write_TIMER4_WIDTH(val)         bfin_write32(TIMER4_WIDTH, val)
+#define bfin_read_TIMER5_CONFIG()            bfin_read16(TIMER5_CONFIG)
+#define bfin_write_TIMER5_CONFIG(val)        bfin_write16(TIMER5_CONFIG, val)
+#define bfin_read_TIMER5_COUNTER()           bfin_read32(TIMER5_COUNTER)
+#define bfin_write_TIMER5_COUNTER(val)       bfin_write32(TIMER5_COUNTER, val)
+#define bfin_read_TIMER5_PERIOD()            bfin_read32(TIMER5_PERIOD)
+#define bfin_write_TIMER5_PERIOD(val)        bfin_write32(TIMER5_PERIOD, val)
+#define bfin_read_TIMER5_WIDTH()             bfin_read32(TIMER5_WIDTH)
+#define bfin_write_TIMER5_WIDTH(val)         bfin_write32(TIMER5_WIDTH, val)
+#define bfin_read_TIMER6_CONFIG()            bfin_read16(TIMER6_CONFIG)
+#define bfin_write_TIMER6_CONFIG(val)        bfin_write16(TIMER6_CONFIG, val)
+#define bfin_read_TIMER6_COUNTER()           bfin_read32(TIMER6_COUNTER)
+#define bfin_write_TIMER6_COUNTER(val)       bfin_write32(TIMER6_COUNTER, val)
+#define bfin_read_TIMER6_PERIOD()            bfin_read32(TIMER6_PERIOD)
+#define bfin_write_TIMER6_PERIOD(val)        bfin_write32(TIMER6_PERIOD, val)
+#define bfin_read_TIMER6_WIDTH()             bfin_read32(TIMER6_WIDTH)
+#define bfin_write_TIMER6_WIDTH(val)         bfin_write32(TIMER6_WIDTH, val)
+#define bfin_read_TIMER7_CONFIG()            bfin_read16(TIMER7_CONFIG)
+#define bfin_write_TIMER7_CONFIG(val)        bfin_write16(TIMER7_CONFIG, val)
+#define bfin_read_TIMER7_COUNTER()           bfin_read32(TIMER7_COUNTER)
+#define bfin_write_TIMER7_COUNTER(val)       bfin_write32(TIMER7_COUNTER, val)
+#define bfin_read_TIMER7_PERIOD()            bfin_read32(TIMER7_PERIOD)
+#define bfin_write_TIMER7_PERIOD(val)        bfin_write32(TIMER7_PERIOD, val)
+#define bfin_read_TIMER7_WIDTH()             bfin_read32(TIMER7_WIDTH)
+#define bfin_write_TIMER7_WIDTH(val)         bfin_write32(TIMER7_WIDTH, val)
+
+
+
+
+/* Two Wire Interface Registers (TWI0) */
+
+/* SPORT1 Registers */
+
+
+/* SMC Registers */
+#define bfin_read_SMC_GCTL() bfin_read32(SMC_GCTL)
+#define bfin_write_SMC_GCTL(val) bfin_write32(SMC_GCTL, val)
+#define bfin_read_SMC_GSTAT() bfin_read32(SMC_GSTAT)
+#define bfin_read_SMC_B0CTL() bfin_read32(SMC_B0CTL)
+#define bfin_write_SMC_B0CTL(val) bfin_write32(SMC_B0CTL, val)
+#define bfin_read_SMC_B0TIM() bfin_read32(SMC_B0TIM)
+#define bfin_write_SMC_B0TIM(val) bfin_write32(SMC_B0TIM, val)
+#define bfin_read_SMC_B0ETIM() bfin_read32(SMC_B0ETIM)
+#define bfin_write_SMC_B0ETIM(val) bfin_write32(SMC_B0ETIM, val)
+#define bfin_read_SMC_B1CTL() bfin_read32(SMC_B1CTL)
+#define bfin_write_SMC_B1CTL(val) bfin_write32(SMC_B1CTL, val)
+#define bfin_read_SMC_B1TIM() bfin_read32(SMC_B1TIM)
+#define bfin_write_SMC_B1TIM(val) bfin_write32(SMC_B1TIM, val)
+#define bfin_read_SMC_B1ETIM() bfin_read32(SMC_B1ETIM)
+#define bfin_write_SMC_B1ETIM(val) bfin_write32(SMC_B1ETIM, val)
+#define bfin_read_SMC_B2CTL() bfin_read32(SMC_B2CTL)
+#define bfin_write_SMC_B2CTL(val) bfin_write32(SMC_B2CTL, val)
+#define bfin_read_SMC_B2TIM() bfin_read32(SMC_B2TIM)
+#define bfin_write_SMC_B2TIM(val) bfin_write32(SMC_B2TIM, val)
+#define bfin_read_SMC_B2ETIM() bfin_read32(SMC_B2ETIM)
+#define bfin_write_SMC_B2ETIM(val) bfin_write32(SMC_B2ETIM, val)
+#define bfin_read_SMC_B3CTL() bfin_read32(SMC_B3CTL)
+#define bfin_write_SMC_B3CTL(val) bfin_write32(SMC_B3CTL, val)
+#define bfin_read_SMC_B3TIM() bfin_read32(SMC_B3TIM)
+#define bfin_write_SMC_B3TIM(val) bfin_write32(SMC_B3TIM, val)
+#define bfin_read_SMC_B3ETIM() bfin_read32(SMC_B3ETIM)
+#define bfin_write_SMC_B3ETIM(val) bfin_write32(SMC_B3ETIM, val)
+
+/* DDR2 Memory Control Registers */
+#define bfin_read_DMC0_CFG() bfin_read32(DMC0_CFG)
+#define bfin_write_DMC0_CFG(val) bfin_write32(DMC0_CFG, val)
+#define bfin_read_DMC0_TR0() bfin_read32(DMC0_TR0)
+#define bfin_write_DMC0_TR0(val) bfin_write32(DMC0_TR0, val)
+#define bfin_read_DMC0_TR1() bfin_read32(DMC0_TR1)
+#define bfin_write_DMC0_TR1(val) bfin_write32(DMC0_TR1, val)
+#define bfin_read_DMC0_TR2() bfin_read32(DMC0_TR2)
+#define bfin_write_DMC0_TR2(val) bfin_write32(DMC0_TR2, val)
+#define bfin_read_DMC0_MR() bfin_read32(DMC0_MR)
+#define bfin_write_DMC0_MR(val) bfin_write32(DMC0_MR, val)
+#define bfin_read_DMC0_EMR1() bfin_read32(DMC0_EMR1)
+#define bfin_write_DMC0_EMR1(val) bfin_write32(DMC0_EMR1, val)
+#define bfin_read_DMC0_CTL() bfin_read32(DMC0_CTL)
+#define bfin_write_DMC0_CTL(val) bfin_write32(DMC0_CTL, val)
+#define bfin_read_DMC0_EFFCTL() bfin_read32(DMC0_EFFCTL)
+#define bfin_write_DMC0_EFFCTL(val) bfin_write32(DMC0_EFFCTL, val)
+#define bfin_read_DMC0_STAT() bfin_read32(DMC0_STAT)
+#define bfin_write_DMC0_STAT(val) bfin_write32(DMC0_STAT, val)
+#define bfin_read_DMC0_DLLCTL() bfin_read32(DMC0_DLLCTL)
+#define bfin_write_DMC0_DLLCTL(val) bfin_write32(DMC0_DLLCTL, val)
+
+/* DDR BankRead and Write Count Registers */
+
+
+/* DMA Channel 0 Registers */
+
+#define bfin_read_DMA0_NEXT_DESC_PTR() 		bfin_read32(DMA0_NEXT_DESC_PTR)
+#define bfin_write_DMA0_NEXT_DESC_PTR(val) 	bfin_write32(DMA0_NEXT_DESC_PTR, val)
+#define bfin_read_DMA0_START_ADDR() 		bfin_read32(DMA0_START_ADDR)
+#define bfin_write_DMA0_START_ADDR(val) 	bfin_write32(DMA0_START_ADDR, val)
+#define bfin_read_DMA0_CONFIG()			bfin_read32(DMA0_CONFIG)
+#define bfin_write_DMA0_CONFIG(val)		bfin_write32(DMA0_CONFIG, val)
+#define bfin_read_DMA0_X_COUNT()		bfin_read32(DMA0_X_COUNT)
+#define bfin_write_DMA0_X_COUNT(val)		bfin_write32(DMA0_X_COUNT, val)
+#define bfin_read_DMA0_X_MODIFY()		bfin_read32(DMA0_X_MODIFY)
+#define bfin_write_DMA0_X_MODIFY(val) 		bfin_write32(DMA0_X_MODIFY, val)
+#define bfin_read_DMA0_Y_COUNT()		bfin_read32(DMA0_Y_COUNT)
+#define bfin_write_DMA0_Y_COUNT(val)		bfin_write32(DMA0_Y_COUNT, val)
+#define bfin_read_DMA0_Y_MODIFY()		bfin_read32(DMA0_Y_MODIFY)
+#define bfin_write_DMA0_Y_MODIFY(val) 		bfin_write32(DMA0_Y_MODIFY, val)
+#define bfin_read_DMA0_CURR_DESC_PTR() 		bfin_read32(DMA0_CURR_DESC_PTR)
+#define bfin_write_DMA0_CURR_DESC_PTR(val) 	bfin_write32(DMA0_CURR_DESC_PTR, val)
+#define bfin_read_DMA0_PREV_DESC_PTR() 		bfin_read32(DMA0_PREV_DESC_PTR)
+#define bfin_write_DMA0_PREV_DESC_PTR(val) 	bfin_write32(DMA0_PREV_DESC_PTR, val)
+#define bfin_read_DMA0_CURR_ADDR() 		bfin_read32(DMA0_CURR_ADDR)
+#define bfin_write_DMA0_CURR_ADDR(val) 		bfin_write32(DMA0_CURR_ADDR, val)
+#define bfin_read_DMA0_IRQ_STATUS()		bfin_read32(DMA0_IRQ_STATUS)
+#define bfin_write_DMA0_IRQ_STATUS(val)		bfin_write32(DMA0_IRQ_STATUS, val)
+#define bfin_read_DMA0_CURR_X_COUNT()		bfin_read32(DMA0_CURR_X_COUNT)
+#define bfin_write_DMA0_CURR_X_COUNT(val)	bfin_write32(DMA0_CURR_X_COUNT, val)
+#define bfin_read_DMA0_CURR_Y_COUNT()		bfin_read32(DMA0_CURR_Y_COUNT)
+#define bfin_write_DMA0_CURR_Y_COUNT(val)	bfin_write32(DMA0_CURR_Y_COUNT, val)
+#define bfin_read_DMA0_BWL_COUNT()		bfin_read32(DMA0_BWL_COUNT)
+#define bfin_write_DMA0_BWL_COUNT(val)		bfin_write32(DMA0_BWL_COUNT, val)
+#define bfin_read_DMA0_CURR_BWL_COUNT()		bfin_read32(DMA0_CURR_BWL_COUNT)
+#define bfin_write_DMA0_CURR_BWL_COUNT(val)	bfin_write32(DMA0_CURR_BWL_COUNT, val)
+#define bfin_read_DMA0_BWM_COUNT()		bfin_read32(DMA0_BWM_COUNT)
+#define bfin_write_DMA0_BWM_COUNT(val)		bfin_write32(DMA0_BWM_COUNT, val)
+#define bfin_read_DMA0_CURR_BWM_COUNT()		bfin_read32(DMA0_CURR_BWM_COUNT)
+#define bfin_write_DMA0_CURR_BWM_COUNT(val)	bfin_write32(DMA0_CURR_BWM_COUNT, val)
+
+/* DMA Channel 1 Registers */
+
+#define bfin_read_DMA1_NEXT_DESC_PTR() 		bfin_read32(DMA1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_NEXT_DESC_PTR(val) 	bfin_write32(DMA1_NEXT_DESC_PTR, val)
+#define bfin_read_DMA1_START_ADDR() 		bfin_read32(DMA1_START_ADDR)
+#define bfin_write_DMA1_START_ADDR(val) 	bfin_write32(DMA1_START_ADDR, val)
+#define bfin_read_DMA1_CONFIG()			bfin_read32(DMA1_CONFIG)
+#define bfin_write_DMA1_CONFIG(val)		bfin_write32(DMA1_CONFIG, val)
+#define bfin_read_DMA1_X_COUNT()		bfin_read32(DMA1_X_COUNT)
+#define bfin_write_DMA1_X_COUNT(val)		bfin_write32(DMA1_X_COUNT, val)
+#define bfin_read_DMA1_X_MODIFY()		bfin_read32(DMA1_X_MODIFY)
+#define bfin_write_DMA1_X_MODIFY(val) 		bfin_write32(DMA1_X_MODIFY, val)
+#define bfin_read_DMA1_Y_COUNT()		bfin_read32(DMA1_Y_COUNT)
+#define bfin_write_DMA1_Y_COUNT(val)		bfin_write32(DMA1_Y_COUNT, val)
+#define bfin_read_DMA1_Y_MODIFY()		bfin_read32(DMA1_Y_MODIFY)
+#define bfin_write_DMA1_Y_MODIFY(val) 		bfin_write32(DMA1_Y_MODIFY, val)
+#define bfin_read_DMA1_CURR_DESC_PTR() 		bfin_read32(DMA1_CURR_DESC_PTR)
+#define bfin_write_DMA1_CURR_DESC_PTR(val) 	bfin_write32(DMA1_CURR_DESC_PTR, val)
+#define bfin_read_DMA1_PREV_DESC_PTR() 		bfin_read32(DMA1_PREV_DESC_PTR)
+#define bfin_write_DMA1_PREV_DESC_PTR(val) 	bfin_write32(DMA1_PREV_DESC_PTR, val)
+#define bfin_read_DMA1_CURR_ADDR() 		bfin_read32(DMA1_CURR_ADDR)
+#define bfin_write_DMA1_CURR_ADDR(val) 		bfin_write32(DMA1_CURR_ADDR, val)
+#define bfin_read_DMA1_IRQ_STATUS()		bfin_read32(DMA1_IRQ_STATUS)
+#define bfin_write_DMA1_IRQ_STATUS(val)		bfin_write32(DMA1_IRQ_STATUS, val)
+#define bfin_read_DMA1_CURR_X_COUNT()		bfin_read32(DMA1_CURR_X_COUNT)
+#define bfin_write_DMA1_CURR_X_COUNT(val)	bfin_write32(DMA1_CURR_X_COUNT, val)
+#define bfin_read_DMA1_CURR_Y_COUNT()		bfin_read32(DMA1_CURR_Y_COUNT)
+#define bfin_write_DMA1_CURR_Y_COUNT(val)	bfin_write32(DMA1_CURR_Y_COUNT, val)
+#define bfin_read_DMA1_BWL_COUNT()		bfin_read32(DMA1_BWL_COUNT)
+#define bfin_write_DMA1_BWL_COUNT(val)		bfin_write32(DMA1_BWL_COUNT, val)
+#define bfin_read_DMA1_CURR_BWL_COUNT()		bfin_read32(DMA1_CURR_BWL_COUNT)
+#define bfin_write_DMA1_CURR_BWL_COUNT(val)	bfin_write32(DMA1_CURR_BWL_COUNT, val)
+#define bfin_read_DMA1_BWM_COUNT()		bfin_read32(DMA1_BWM_COUNT)
+#define bfin_write_DMA1_BWM_COUNT(val)		bfin_write32(DMA1_BWM_COUNT, val)
+#define bfin_read_DMA1_CURR_BWM_COUNT()		bfin_read32(DMA1_CURR_BWM_COUNT)
+#define bfin_write_DMA1_CURR_BWM_COUNT(val)	bfin_write32(DMA1_CURR_BWM_COUNT, val)
+
+/* DMA Channel 2 Registers */
+
+#define bfin_read_DMA2_NEXT_DESC_PTR() 		bfin_read32(DMA2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_NEXT_DESC_PTR(val) 	bfin_write32(DMA2_NEXT_DESC_PTR, val)
+#define bfin_read_DMA2_START_ADDR() 		bfin_read32(DMA2_START_ADDR)
+#define bfin_write_DMA2_START_ADDR(val) 	bfin_write32(DMA2_START_ADDR, val)
+#define bfin_read_DMA2_CONFIG()			bfin_read32(DMA2_CONFIG)
+#define bfin_write_DMA2_CONFIG(val)		bfin_write32(DMA2_CONFIG, val)
+#define bfin_read_DMA2_X_COUNT()		bfin_read32(DMA2_X_COUNT)
+#define bfin_write_DMA2_X_COUNT(val)		bfin_write32(DMA2_X_COUNT, val)
+#define bfin_read_DMA2_X_MODIFY()		bfin_read32(DMA2_X_MODIFY)
+#define bfin_write_DMA2_X_MODIFY(val) 		bfin_write32(DMA2_X_MODIFY, val)
+#define bfin_read_DMA2_Y_COUNT()		bfin_read32(DMA2_Y_COUNT)
+#define bfin_write_DMA2_Y_COUNT(val)		bfin_write32(DMA2_Y_COUNT, val)
+#define bfin_read_DMA2_Y_MODIFY()		bfin_read32(DMA2_Y_MODIFY)
+#define bfin_write_DMA2_Y_MODIFY(val) 		bfin_write32(DMA2_Y_MODIFY, val)
+#define bfin_read_DMA2_CURR_DESC_PTR() 		bfin_read32(DMA2_CURR_DESC_PTR)
+#define bfin_write_DMA2_CURR_DESC_PTR(val) 	bfin_write32(DMA2_CURR_DESC_PTR, val)
+#define bfin_read_DMA2_PREV_DESC_PTR() 		bfin_read32(DMA2_PREV_DESC_PTR)
+#define bfin_write_DMA2_PREV_DESC_PTR(val) 	bfin_write32(DMA2_PREV_DESC_PTR, val)
+#define bfin_read_DMA2_CURR_ADDR() 		bfin_read32(DMA2_CURR_ADDR)
+#define bfin_write_DMA2_CURR_ADDR(val) 		bfin_write32(DMA2_CURR_ADDR, val)
+#define bfin_read_DMA2_IRQ_STATUS()		bfin_read32(DMA2_IRQ_STATUS)
+#define bfin_write_DMA2_IRQ_STATUS(val)		bfin_write32(DMA2_IRQ_STATUS, val)
+#define bfin_read_DMA2_CURR_X_COUNT()		bfin_read32(DMA2_CURR_X_COUNT)
+#define bfin_write_DMA2_CURR_X_COUNT(val)	bfin_write32(DMA2_CURR_X_COUNT, val)
+#define bfin_read_DMA2_CURR_Y_COUNT()		bfin_read32(DMA2_CURR_Y_COUNT)
+#define bfin_write_DMA2_CURR_Y_COUNT(val)	bfin_write32(DMA2_CURR_Y_COUNT, val)
+#define bfin_read_DMA2_BWL_COUNT()		bfin_read32(DMA2_BWL_COUNT)
+#define bfin_write_DMA2_BWL_COUNT(val)		bfin_write32(DMA2_BWL_COUNT, val)
+#define bfin_read_DMA2_CURR_BWL_COUNT()		bfin_read32(DMA2_CURR_BWL_COUNT)
+#define bfin_write_DMA2_CURR_BWL_COUNT(val)	bfin_write32(DMA2_CURR_BWL_COUNT, val)
+#define bfin_read_DMA2_BWM_COUNT()		bfin_read32(DMA2_BWM_COUNT)
+#define bfin_write_DMA2_BWM_COUNT(val)		bfin_write32(DMA2_BWM_COUNT, val)
+#define bfin_read_DMA2_CURR_BWM_COUNT()		bfin_read32(DMA2_CURR_BWM_COUNT)
+#define bfin_write_DMA2_CURR_BWM_COUNT(val)	bfin_write32(DMA2_CURR_BWM_COUNT, val)
+
+/* DMA Channel 3 Registers */
+
+#define bfin_read_DMA3_NEXT_DESC_PTR() 		bfin_read32(DMA3_NEXT_DESC_PTR)
+#define bfin_write_DMA3_NEXT_DESC_PTR(val) 	bfin_write32(DMA3_NEXT_DESC_PTR, val)
+#define bfin_read_DMA3_START_ADDR() 		bfin_read32(DMA3_START_ADDR)
+#define bfin_write_DMA3_START_ADDR(val) 	bfin_write32(DMA3_START_ADDR, val)
+#define bfin_read_DMA3_CONFIG()			bfin_read32(DMA3_CONFIG)
+#define bfin_write_DMA3_CONFIG(val)		bfin_write32(DMA3_CONFIG, val)
+#define bfin_read_DMA3_X_COUNT()		bfin_read32(DMA3_X_COUNT)
+#define bfin_write_DMA3_X_COUNT(val)		bfin_write32(DMA3_X_COUNT, val)
+#define bfin_read_DMA3_X_MODIFY()		bfin_read32(DMA3_X_MODIFY)
+#define bfin_write_DMA3_X_MODIFY(val) 		bfin_write32(DMA3_X_MODIFY, val)
+#define bfin_read_DMA3_Y_COUNT()		bfin_read32(DMA3_Y_COUNT)
+#define bfin_write_DMA3_Y_COUNT(val)		bfin_write32(DMA3_Y_COUNT, val)
+#define bfin_read_DMA3_Y_MODIFY()		bfin_read32(DMA3_Y_MODIFY)
+#define bfin_write_DMA3_Y_MODIFY(val) 		bfin_write32(DMA3_Y_MODIFY, val)
+#define bfin_read_DMA3_CURR_DESC_PTR() 		bfin_read32(DMA3_CURR_DESC_PTR)
+#define bfin_write_DMA3_CURR_DESC_PTR(val) 	bfin_write32(DMA3_CURR_DESC_PTR, val)
+#define bfin_read_DMA3_PREV_DESC_PTR() 		bfin_read32(DMA3_PREV_DESC_PTR)
+#define bfin_write_DMA3_PREV_DESC_PTR(val) 	bfin_write32(DMA3_PREV_DESC_PTR, val)
+#define bfin_read_DMA3_CURR_ADDR() 		bfin_read32(DMA3_CURR_ADDR)
+#define bfin_write_DMA3_CURR_ADDR(val) 		bfin_write32(DMA3_CURR_ADDR, val)
+#define bfin_read_DMA3_IRQ_STATUS()		bfin_read32(DMA3_IRQ_STATUS)
+#define bfin_write_DMA3_IRQ_STATUS(val)		bfin_write32(DMA3_IRQ_STATUS, val)
+#define bfin_read_DMA3_CURR_X_COUNT()		bfin_read32(DMA3_CURR_X_COUNT)
+#define bfin_write_DMA3_CURR_X_COUNT(val)	bfin_write32(DMA3_CURR_X_COUNT, val)
+#define bfin_read_DMA3_CURR_Y_COUNT()		bfin_read32(DMA3_CURR_Y_COUNT)
+#define bfin_write_DMA3_CURR_Y_COUNT(val)	bfin_write32(DMA3_CURR_Y_COUNT, val)
+#define bfin_read_DMA3_BWL_COUNT()		bfin_read32(DMA3_BWL_COUNT)
+#define bfin_write_DMA3_BWL_COUNT(val)		bfin_write32(DMA3_BWL_COUNT, val)
+#define bfin_read_DMA3_CURR_BWL_COUNT()		bfin_read32(DMA3_CURR_BWL_COUNT)
+#define bfin_write_DMA3_CURR_BWL_COUNT(val)	bfin_write32(DMA3_CURR_BWL_COUNT, val)
+#define bfin_read_DMA3_BWM_COUNT()		bfin_read32(DMA3_BWM_COUNT)
+#define bfin_write_DMA3_BWM_COUNT(val)		bfin_write32(DMA3_BWM_COUNT, val)
+#define bfin_read_DMA3_CURR_BWM_COUNT()		bfin_read32(DMA3_CURR_BWM_COUNT)
+#define bfin_write_DMA3_CURR_BWM_COUNT(val)	bfin_write32(DMA3_CURR_BWM_COUNT, val)
+
+/* DMA Channel 4 Registers */
+
+#define bfin_read_DMA4_NEXT_DESC_PTR() 		bfin_read32(DMA4_NEXT_DESC_PTR)
+#define bfin_write_DMA4_NEXT_DESC_PTR(val) 	bfin_write32(DMA4_NEXT_DESC_PTR, val)
+#define bfin_read_DMA4_START_ADDR() 		bfin_read32(DMA4_START_ADDR)
+#define bfin_write_DMA4_START_ADDR(val) 	bfin_write32(DMA4_START_ADDR, val)
+#define bfin_read_DMA4_CONFIG()			bfin_read32(DMA4_CONFIG)
+#define bfin_write_DMA4_CONFIG(val)		bfin_write32(DMA4_CONFIG, val)
+#define bfin_read_DMA4_X_COUNT()		bfin_read32(DMA4_X_COUNT)
+#define bfin_write_DMA4_X_COUNT(val)		bfin_write32(DMA4_X_COUNT, val)
+#define bfin_read_DMA4_X_MODIFY()		bfin_read32(DMA4_X_MODIFY)
+#define bfin_write_DMA4_X_MODIFY(val) 		bfin_write32(DMA4_X_MODIFY, val)
+#define bfin_read_DMA4_Y_COUNT()		bfin_read32(DMA4_Y_COUNT)
+#define bfin_write_DMA4_Y_COUNT(val)		bfin_write32(DMA4_Y_COUNT, val)
+#define bfin_read_DMA4_Y_MODIFY()		bfin_read32(DMA4_Y_MODIFY)
+#define bfin_write_DMA4_Y_MODIFY(val) 		bfin_write32(DMA4_Y_MODIFY, val)
+#define bfin_read_DMA4_CURR_DESC_PTR() 		bfin_read32(DMA4_CURR_DESC_PTR)
+#define bfin_write_DMA4_CURR_DESC_PTR(val) 	bfin_write32(DMA4_CURR_DESC_PTR, val)
+#define bfin_read_DMA4_PREV_DESC_PTR() 		bfin_read32(DMA4_PREV_DESC_PTR)
+#define bfin_write_DMA4_PREV_DESC_PTR(val) 	bfin_write32(DMA4_PREV_DESC_PTR, val)
+#define bfin_read_DMA4_CURR_ADDR() 		bfin_read32(DMA4_CURR_ADDR)
+#define bfin_write_DMA4_CURR_ADDR(val) 		bfin_write32(DMA4_CURR_ADDR, val)
+#define bfin_read_DMA4_IRQ_STATUS()		bfin_read32(DMA4_IRQ_STATUS)
+#define bfin_write_DMA4_IRQ_STATUS(val)		bfin_write32(DMA4_IRQ_STATUS, val)
+#define bfin_read_DMA4_CURR_X_COUNT()		bfin_read32(DMA4_CURR_X_COUNT)
+#define bfin_write_DMA4_CURR_X_COUNT(val)	bfin_write32(DMA4_CURR_X_COUNT, val)
+#define bfin_read_DMA4_CURR_Y_COUNT()		bfin_read32(DMA4_CURR_Y_COUNT)
+#define bfin_write_DMA4_CURR_Y_COUNT(val)	bfin_write32(DMA4_CURR_Y_COUNT, val)
+#define bfin_read_DMA4_BWL_COUNT()		bfin_read32(DMA4_BWL_COUNT)
+#define bfin_write_DMA4_BWL_COUNT(val)		bfin_write32(DMA4_BWL_COUNT, val)
+#define bfin_read_DMA4_CURR_BWL_COUNT()		bfin_read32(DMA4_CURR_BWL_COUNT)
+#define bfin_write_DMA4_CURR_BWL_COUNT(val)	bfin_write32(DMA4_CURR_BWL_COUNT, val)
+#define bfin_read_DMA4_BWM_COUNT()		bfin_read32(DMA4_BWM_COUNT)
+#define bfin_write_DMA4_BWM_COUNT(val)		bfin_write32(DMA4_BWM_COUNT, val)
+#define bfin_read_DMA4_CURR_BWM_COUNT()		bfin_read32(DMA4_CURR_BWM_COUNT)
+#define bfin_write_DMA4_CURR_BWM_COUNT(val)	bfin_write32(DMA4_CURR_BWM_COUNT, val)
+
+/* DMA Channel 5 Registers */
+
+#define bfin_read_DMA5_NEXT_DESC_PTR() 		bfin_read32(DMA5_NEXT_DESC_PTR)
+#define bfin_write_DMA5_NEXT_DESC_PTR(val) 	bfin_write32(DMA5_NEXT_DESC_PTR, val)
+#define bfin_read_DMA5_START_ADDR() 		bfin_read32(DMA5_START_ADDR)
+#define bfin_write_DMA5_START_ADDR(val) 	bfin_write32(DMA5_START_ADDR, val)
+#define bfin_read_DMA5_CONFIG()			bfin_read32(DMA5_CONFIG)
+#define bfin_write_DMA5_CONFIG(val)		bfin_write32(DMA5_CONFIG, val)
+#define bfin_read_DMA5_X_COUNT()		bfin_read32(DMA5_X_COUNT)
+#define bfin_write_DMA5_X_COUNT(val)		bfin_write32(DMA5_X_COUNT, val)
+#define bfin_read_DMA5_X_MODIFY()		bfin_read32(DMA5_X_MODIFY)
+#define bfin_write_DMA5_X_MODIFY(val) 		bfin_write32(DMA5_X_MODIFY, val)
+#define bfin_read_DMA5_Y_COUNT()		bfin_read32(DMA5_Y_COUNT)
+#define bfin_write_DMA5_Y_COUNT(val)		bfin_write32(DMA5_Y_COUNT, val)
+#define bfin_read_DMA5_Y_MODIFY()		bfin_read32(DMA5_Y_MODIFY)
+#define bfin_write_DMA5_Y_MODIFY(val) 		bfin_write32(DMA5_Y_MODIFY, val)
+#define bfin_read_DMA5_CURR_DESC_PTR() 		bfin_read32(DMA5_CURR_DESC_PTR)
+#define bfin_write_DMA5_CURR_DESC_PTR(val) 	bfin_write32(DMA5_CURR_DESC_PTR, val)
+#define bfin_read_DMA5_PREV_DESC_PTR() 		bfin_read32(DMA5_PREV_DESC_PTR)
+#define bfin_write_DMA5_PREV_DESC_PTR(val) 	bfin_write32(DMA5_PREV_DESC_PTR, val)
+#define bfin_read_DMA5_CURR_ADDR() 		bfin_read32(DMA5_CURR_ADDR)
+#define bfin_write_DMA5_CURR_ADDR(val) 		bfin_write32(DMA5_CURR_ADDR, val)
+#define bfin_read_DMA5_IRQ_STATUS()		bfin_read32(DMA5_IRQ_STATUS)
+#define bfin_write_DMA5_IRQ_STATUS(val)		bfin_write32(DMA5_IRQ_STATUS, val)
+#define bfin_read_DMA5_CURR_X_COUNT()		bfin_read32(DMA5_CURR_X_COUNT)
+#define bfin_write_DMA5_CURR_X_COUNT(val)	bfin_write32(DMA5_CURR_X_COUNT, val)
+#define bfin_read_DMA5_CURR_Y_COUNT()		bfin_read32(DMA5_CURR_Y_COUNT)
+#define bfin_write_DMA5_CURR_Y_COUNT(val)	bfin_write32(DMA5_CURR_Y_COUNT, val)
+#define bfin_read_DMA5_BWL_COUNT()		bfin_read32(DMA5_BWL_COUNT)
+#define bfin_write_DMA5_BWL_COUNT(val)		bfin_write32(DMA5_BWL_COUNT, val)
+#define bfin_read_DMA5_CURR_BWL_COUNT()		bfin_read32(DMA5_CURR_BWL_COUNT)
+#define bfin_write_DMA5_CURR_BWL_COUNT(val)	bfin_write32(DMA5_CURR_BWL_COUNT, val)
+#define bfin_read_DMA5_BWM_COUNT()		bfin_read32(DMA5_BWM_COUNT)
+#define bfin_write_DMA5_BWM_COUNT(val)		bfin_write32(DMA5_BWM_COUNT, val)
+#define bfin_read_DMA5_CURR_BWM_COUNT()		bfin_read32(DMA5_CURR_BWM_COUNT)
+#define bfin_write_DMA5_CURR_BWM_COUNT(val)	bfin_write32(DMA5_CURR_BWM_COUNT, val)
+
+/* DMA Channel 6 Registers */
+
+#define bfin_read_DMA6_NEXT_DESC_PTR() 		bfin_read32(DMA6_NEXT_DESC_PTR)
+#define bfin_write_DMA6_NEXT_DESC_PTR(val) 	bfin_write32(DMA6_NEXT_DESC_PTR, val)
+#define bfin_read_DMA6_START_ADDR() 		bfin_read32(DMA6_START_ADDR)
+#define bfin_write_DMA6_START_ADDR(val) 	bfin_write32(DMA6_START_ADDR, val)
+#define bfin_read_DMA6_CONFIG()			bfin_read32(DMA6_CONFIG)
+#define bfin_write_DMA6_CONFIG(val)		bfin_write32(DMA6_CONFIG, val)
+#define bfin_read_DMA6_X_COUNT()		bfin_read32(DMA6_X_COUNT)
+#define bfin_write_DMA6_X_COUNT(val)		bfin_write32(DMA6_X_COUNT, val)
+#define bfin_read_DMA6_X_MODIFY()		bfin_read32(DMA6_X_MODIFY)
+#define bfin_write_DMA6_X_MODIFY(val) 		bfin_write32(DMA6_X_MODIFY, val)
+#define bfin_read_DMA6_Y_COUNT()		bfin_read32(DMA6_Y_COUNT)
+#define bfin_write_DMA6_Y_COUNT(val)		bfin_write32(DMA6_Y_COUNT, val)
+#define bfin_read_DMA6_Y_MODIFY()		bfin_read32(DMA6_Y_MODIFY)
+#define bfin_write_DMA6_Y_MODIFY(val) 		bfin_write32(DMA6_Y_MODIFY, val)
+#define bfin_read_DMA6_CURR_DESC_PTR() 		bfin_read32(DMA6_CURR_DESC_PTR)
+#define bfin_write_DMA6_CURR_DESC_PTR(val) 	bfin_write32(DMA6_CURR_DESC_PTR, val)
+#define bfin_read_DMA6_PREV_DESC_PTR() 		bfin_read32(DMA6_PREV_DESC_PTR)
+#define bfin_write_DMA6_PREV_DESC_PTR(val) 	bfin_write32(DMA6_PREV_DESC_PTR, val)
+#define bfin_read_DMA6_CURR_ADDR() 		bfin_read32(DMA6_CURR_ADDR)
+#define bfin_write_DMA6_CURR_ADDR(val) 		bfin_write32(DMA6_CURR_ADDR, val)
+#define bfin_read_DMA6_IRQ_STATUS()		bfin_read32(DMA6_IRQ_STATUS)
+#define bfin_write_DMA6_IRQ_STATUS(val)		bfin_write32(DMA6_IRQ_STATUS, val)
+#define bfin_read_DMA6_CURR_X_COUNT()		bfin_read32(DMA6_CURR_X_COUNT)
+#define bfin_write_DMA6_CURR_X_COUNT(val)	bfin_write32(DMA6_CURR_X_COUNT, val)
+#define bfin_read_DMA6_CURR_Y_COUNT()		bfin_read32(DMA6_CURR_Y_COUNT)
+#define bfin_write_DMA6_CURR_Y_COUNT(val)	bfin_write32(DMA6_CURR_Y_COUNT, val)
+#define bfin_read_DMA6_BWL_COUNT()		bfin_read32(DMA6_BWL_COUNT)
+#define bfin_write_DMA6_BWL_COUNT(val)		bfin_write32(DMA6_BWL_COUNT, val)
+#define bfin_read_DMA6_CURR_BWL_COUNT()		bfin_read32(DMA6_CURR_BWL_COUNT)
+#define bfin_write_DMA6_CURR_BWL_COUNT(val)	bfin_write32(DMA6_CURR_BWL_COUNT, val)
+#define bfin_read_DMA6_BWM_COUNT()		bfin_read32(DMA6_BWM_COUNT)
+#define bfin_write_DMA6_BWM_COUNT(val)		bfin_write32(DMA6_BWM_COUNT, val)
+#define bfin_read_DMA6_CURR_BWM_COUNT()		bfin_read32(DMA6_CURR_BWM_COUNT)
+#define bfin_write_DMA6_CURR_BWM_COUNT(val)	bfin_write32(DMA6_CURR_BWM_COUNT, val)
+
+/* DMA Channel 7 Registers */
+
+#define bfin_read_DMA7_NEXT_DESC_PTR() 		bfin_read32(DMA7_NEXT_DESC_PTR)
+#define bfin_write_DMA7_NEXT_DESC_PTR(val) 	bfin_write32(DMA7_NEXT_DESC_PTR, val)
+#define bfin_read_DMA7_START_ADDR() 		bfin_read32(DMA7_START_ADDR)
+#define bfin_write_DMA7_START_ADDR(val) 	bfin_write32(DMA7_START_ADDR, val)
+#define bfin_read_DMA7_CONFIG()			bfin_read32(DMA7_CONFIG)
+#define bfin_write_DMA7_CONFIG(val)		bfin_write32(DMA7_CONFIG, val)
+#define bfin_read_DMA7_X_COUNT()		bfin_read32(DMA7_X_COUNT)
+#define bfin_write_DMA7_X_COUNT(val)		bfin_write32(DMA7_X_COUNT, val)
+#define bfin_read_DMA7_X_MODIFY()		bfin_read32(DMA7_X_MODIFY)
+#define bfin_write_DMA7_X_MODIFY(val) 		bfin_write32(DMA7_X_MODIFY, val)
+#define bfin_read_DMA7_Y_COUNT()		bfin_read32(DMA7_Y_COUNT)
+#define bfin_write_DMA7_Y_COUNT(val)		bfin_write32(DMA7_Y_COUNT, val)
+#define bfin_read_DMA7_Y_MODIFY()		bfin_read32(DMA7_Y_MODIFY)
+#define bfin_write_DMA7_Y_MODIFY(val) 		bfin_write32(DMA7_Y_MODIFY, val)
+#define bfin_read_DMA7_CURR_DESC_PTR() 		bfin_read32(DMA7_CURR_DESC_PTR)
+#define bfin_write_DMA7_CURR_DESC_PTR(val) 	bfin_write32(DMA7_CURR_DESC_PTR, val)
+#define bfin_read_DMA7_PREV_DESC_PTR() 		bfin_read32(DMA7_PREV_DESC_PTR)
+#define bfin_write_DMA7_PREV_DESC_PTR(val) 	bfin_write32(DMA7_PREV_DESC_PTR, val)
+#define bfin_read_DMA7_CURR_ADDR() 		bfin_read32(DMA7_CURR_ADDR)
+#define bfin_write_DMA7_CURR_ADDR(val) 		bfin_write32(DMA7_CURR_ADDR, val)
+#define bfin_read_DMA7_IRQ_STATUS()		bfin_read32(DMA7_IRQ_STATUS)
+#define bfin_write_DMA7_IRQ_STATUS(val)		bfin_write32(DMA7_IRQ_STATUS, val)
+#define bfin_read_DMA7_CURR_X_COUNT()		bfin_read32(DMA7_CURR_X_COUNT)
+#define bfin_write_DMA7_CURR_X_COUNT(val)	bfin_write32(DMA7_CURR_X_COUNT, val)
+#define bfin_read_DMA7_CURR_Y_COUNT()		bfin_read32(DMA7_CURR_Y_COUNT)
+#define bfin_write_DMA7_CURR_Y_COUNT(val)	bfin_write32(DMA7_CURR_Y_COUNT, val)
+#define bfin_read_DMA7_BWL_COUNT()		bfin_read32(DMA7_BWL_COUNT)
+#define bfin_write_DMA7_BWL_COUNT(val)		bfin_write32(DMA7_BWL_COUNT, val)
+#define bfin_read_DMA7_CURR_BWL_COUNT()		bfin_read32(DMA7_CURR_BWL_COUNT)
+#define bfin_write_DMA7_CURR_BWL_COUNT(val)	bfin_write32(DMA7_CURR_BWL_COUNT, val)
+#define bfin_read_DMA7_BWM_COUNT()		bfin_read32(DMA7_BWM_COUNT)
+#define bfin_write_DMA7_BWM_COUNT(val)		bfin_write32(DMA7_BWM_COUNT, val)
+#define bfin_read_DMA7_CURR_BWM_COUNT()		bfin_read32(DMA7_CURR_BWM_COUNT)
+#define bfin_write_DMA7_CURR_BWM_COUNT(val)	bfin_write32(DMA7_CURR_BWM_COUNT, val)
+
+/* DMA Channel 8 Registers */
+
+#define bfin_read_DMA8_NEXT_DESC_PTR() 		bfin_read32(DMA8_NEXT_DESC_PTR)
+#define bfin_write_DMA8_NEXT_DESC_PTR(val) 	bfin_write32(DMA8_NEXT_DESC_PTR, val)
+#define bfin_read_DMA8_START_ADDR() 		bfin_read32(DMA8_START_ADDR)
+#define bfin_write_DMA8_START_ADDR(val) 	bfin_write32(DMA8_START_ADDR, val)
+#define bfin_read_DMA8_CONFIG()			bfin_read32(DMA8_CONFIG)
+#define bfin_write_DMA8_CONFIG(val)		bfin_write32(DMA8_CONFIG, val)
+#define bfin_read_DMA8_X_COUNT()		bfin_read32(DMA8_X_COUNT)
+#define bfin_write_DMA8_X_COUNT(val)		bfin_write32(DMA8_X_COUNT, val)
+#define bfin_read_DMA8_X_MODIFY()		bfin_read32(DMA8_X_MODIFY)
+#define bfin_write_DMA8_X_MODIFY(val) 		bfin_write32(DMA8_X_MODIFY, val)
+#define bfin_read_DMA8_Y_COUNT()		bfin_read32(DMA8_Y_COUNT)
+#define bfin_write_DMA8_Y_COUNT(val)		bfin_write32(DMA8_Y_COUNT, val)
+#define bfin_read_DMA8_Y_MODIFY()		bfin_read32(DMA8_Y_MODIFY)
+#define bfin_write_DMA8_Y_MODIFY(val) 		bfin_write32(DMA8_Y_MODIFY, val)
+#define bfin_read_DMA8_CURR_DESC_PTR() 		bfin_read32(DMA8_CURR_DESC_PTR)
+#define bfin_write_DMA8_CURR_DESC_PTR(val) 	bfin_write32(DMA8_CURR_DESC_PTR, val)
+#define bfin_read_DMA8_PREV_DESC_PTR() 		bfin_read32(DMA8_PREV_DESC_PTR)
+#define bfin_write_DMA8_PREV_DESC_PTR(val) 	bfin_write32(DMA8_PREV_DESC_PTR, val)
+#define bfin_read_DMA8_CURR_ADDR() 		bfin_read32(DMA8_CURR_ADDR)
+#define bfin_write_DMA8_CURR_ADDR(val) 		bfin_write32(DMA8_CURR_ADDR, val)
+#define bfin_read_DMA8_IRQ_STATUS()		bfin_read32(DMA8_IRQ_STATUS)
+#define bfin_write_DMA8_IRQ_STATUS(val)		bfin_write32(DMA8_IRQ_STATUS, val)
+#define bfin_read_DMA8_CURR_X_COUNT()		bfin_read32(DMA8_CURR_X_COUNT)
+#define bfin_write_DMA8_CURR_X_COUNT(val)	bfin_write32(DMA8_CURR_X_COUNT, val)
+#define bfin_read_DMA8_CURR_Y_COUNT()		bfin_read32(DMA8_CURR_Y_COUNT)
+#define bfin_write_DMA8_CURR_Y_COUNT(val)	bfin_write32(DMA8_CURR_Y_COUNT, val)
+#define bfin_read_DMA8_BWL_COUNT()		bfin_read32(DMA8_BWL_COUNT)
+#define bfin_write_DMA8_BWL_COUNT(val)		bfin_write32(DMA8_BWL_COUNT, val)
+#define bfin_read_DMA8_CURR_BWL_COUNT()		bfin_read32(DMA8_CURR_BWL_COUNT)
+#define bfin_write_DMA8_CURR_BWL_COUNT(val)	bfin_write32(DMA8_CURR_BWL_COUNT, val)
+#define bfin_read_DMA8_BWM_COUNT()		bfin_read32(DMA8_BWM_COUNT)
+#define bfin_write_DMA8_BWM_COUNT(val)		bfin_write32(DMA8_BWM_COUNT, val)
+#define bfin_read_DMA8_CURR_BWM_COUNT()		bfin_read32(DMA8_CURR_BWM_COUNT)
+#define bfin_write_DMA8_CURR_BWM_COUNT(val)	bfin_write32(DMA8_CURR_BWM_COUNT, val)
+
+/* DMA Channel 9 Registers */
+
+#define bfin_read_DMA9_NEXT_DESC_PTR() 		bfin_read32(DMA9_NEXT_DESC_PTR)
+#define bfin_write_DMA9_NEXT_DESC_PTR(val) 	bfin_write32(DMA9_NEXT_DESC_PTR, val)
+#define bfin_read_DMA9_START_ADDR() 		bfin_read32(DMA9_START_ADDR)
+#define bfin_write_DMA9_START_ADDR(val) 	bfin_write32(DMA9_START_ADDR, val)
+#define bfin_read_DMA9_CONFIG()			bfin_read32(DMA9_CONFIG)
+#define bfin_write_DMA9_CONFIG(val)		bfin_write32(DMA9_CONFIG, val)
+#define bfin_read_DMA9_X_COUNT()		bfin_read32(DMA9_X_COUNT)
+#define bfin_write_DMA9_X_COUNT(val)		bfin_write32(DMA9_X_COUNT, val)
+#define bfin_read_DMA9_X_MODIFY()		bfin_read32(DMA9_X_MODIFY)
+#define bfin_write_DMA9_X_MODIFY(val) 		bfin_write32(DMA9_X_MODIFY, val)
+#define bfin_read_DMA9_Y_COUNT()		bfin_read32(DMA9_Y_COUNT)
+#define bfin_write_DMA9_Y_COUNT(val)		bfin_write32(DMA9_Y_COUNT, val)
+#define bfin_read_DMA9_Y_MODIFY()		bfin_read32(DMA9_Y_MODIFY)
+#define bfin_write_DMA9_Y_MODIFY(val) 		bfin_write32(DMA9_Y_MODIFY, val)
+#define bfin_read_DMA9_CURR_DESC_PTR() 		bfin_read32(DMA9_CURR_DESC_PTR)
+#define bfin_write_DMA9_CURR_DESC_PTR(val) 	bfin_write32(DMA9_CURR_DESC_PTR, val)
+#define bfin_read_DMA9_PREV_DESC_PTR() 		bfin_read32(DMA9_PREV_DESC_PTR)
+#define bfin_write_DMA9_PREV_DESC_PTR(val) 	bfin_write32(DMA9_PREV_DESC_PTR, val)
+#define bfin_read_DMA9_CURR_ADDR() 		bfin_read32(DMA9_CURR_ADDR)
+#define bfin_write_DMA9_CURR_ADDR(val) 		bfin_write32(DMA9_CURR_ADDR, val)
+#define bfin_read_DMA9_IRQ_STATUS()		bfin_read32(DMA9_IRQ_STATUS)
+#define bfin_write_DMA9_IRQ_STATUS(val)		bfin_write32(DMA9_IRQ_STATUS, val)
+#define bfin_read_DMA9_CURR_X_COUNT()		bfin_read32(DMA9_CURR_X_COUNT)
+#define bfin_write_DMA9_CURR_X_COUNT(val)	bfin_write32(DMA9_CURR_X_COUNT, val)
+#define bfin_read_DMA9_CURR_Y_COUNT()		bfin_read32(DMA9_CURR_Y_COUNT)
+#define bfin_write_DMA9_CURR_Y_COUNT(val)	bfin_write32(DMA9_CURR_Y_COUNT, val)
+#define bfin_read_DMA9_BWL_COUNT()		bfin_read32(DMA9_BWL_COUNT)
+#define bfin_write_DMA9_BWL_COUNT(val)		bfin_write32(DMA9_BWL_COUNT, val)
+#define bfin_read_DMA9_CURR_BWL_COUNT()		bfin_read32(DMA9_CURR_BWL_COUNT)
+#define bfin_write_DMA9_CURR_BWL_COUNT(val)	bfin_write32(DMA9_CURR_BWL_COUNT, val)
+#define bfin_read_DMA9_BWM_COUNT()		bfin_read32(DMA9_BWM_COUNT)
+#define bfin_write_DMA9_BWM_COUNT(val)		bfin_write32(DMA9_BWM_COUNT, val)
+#define bfin_read_DMA9_CURR_BWM_COUNT()		bfin_read32(DMA9_CURR_BWM_COUNT)
+#define bfin_write_DMA9_CURR_BWM_COUNT(val)	bfin_write32(DMA9_CURR_BWM_COUNT, val)
+
+/* DMA Channel 10 Registers */
+
+#define bfin_read_DMA10_NEXT_DESC_PTR() 	bfin_read32(DMA10_NEXT_DESC_PTR)
+#define bfin_write_DMA10_NEXT_DESC_PTR(val) 	bfin_write32(DMA10_NEXT_DESC_PTR, val)
+#define bfin_read_DMA10_START_ADDR() 		bfin_read32(DMA10_START_ADDR)
+#define bfin_write_DMA10_START_ADDR(val) 	bfin_write32(DMA10_START_ADDR, val)
+#define bfin_read_DMA10_CONFIG()		bfin_read32(DMA10_CONFIG)
+#define bfin_write_DMA10_CONFIG(val)		bfin_write32(DMA10_CONFIG, val)
+#define bfin_read_DMA10_X_COUNT()		bfin_read32(DMA10_X_COUNT)
+#define bfin_write_DMA10_X_COUNT(val)		bfin_write32(DMA10_X_COUNT, val)
+#define bfin_read_DMA10_X_MODIFY()		bfin_read32(DMA10_X_MODIFY)
+#define bfin_write_DMA10_X_MODIFY(val) 		bfin_write32(DMA10_X_MODIFY, val)
+#define bfin_read_DMA10_Y_COUNT()		bfin_read32(DMA10_Y_COUNT)
+#define bfin_write_DMA10_Y_COUNT(val)		bfin_write32(DMA10_Y_COUNT, val)
+#define bfin_read_DMA10_Y_MODIFY()		bfin_read32(DMA10_Y_MODIFY)
+#define bfin_write_DMA10_Y_MODIFY(val) 		bfin_write32(DMA10_Y_MODIFY, val)
+#define bfin_read_DMA10_CURR_DESC_PTR() 	bfin_read32(DMA10_CURR_DESC_PTR)
+#define bfin_write_DMA10_CURR_DESC_PTR(val) 	bfin_write32(DMA10_CURR_DESC_PTR, val)
+#define bfin_read_DMA10_PREV_DESC_PTR() 	bfin_read32(DMA10_PREV_DESC_PTR)
+#define bfin_write_DMA10_PREV_DESC_PTR(val) 	bfin_write32(DMA10_PREV_DESC_PTR, val)
+#define bfin_read_DMA10_CURR_ADDR() 		bfin_read32(DMA10_CURR_ADDR)
+#define bfin_write_DMA10_CURR_ADDR(val) 	bfin_write32(DMA10_CURR_ADDR, val)
+#define bfin_read_DMA10_IRQ_STATUS()		bfin_read32(DMA10_IRQ_STATUS)
+#define bfin_write_DMA10_IRQ_STATUS(val)	bfin_write32(DMA10_IRQ_STATUS, val)
+#define bfin_read_DMA10_CURR_X_COUNT()		bfin_read32(DMA10_CURR_X_COUNT)
+#define bfin_write_DMA10_CURR_X_COUNT(val)	bfin_write32(DMA10_CURR_X_COUNT, val)
+#define bfin_read_DMA10_CURR_Y_COUNT()		bfin_read32(DMA10_CURR_Y_COUNT)
+#define bfin_write_DMA10_CURR_Y_COUNT(val)	bfin_write32(DMA10_CURR_Y_COUNT, val)
+#define bfin_read_DMA10_BWL_COUNT()		bfin_read32(DMA10_BWL_COUNT)
+#define bfin_write_DMA10_BWL_COUNT(val)		bfin_write32(DMA10_BWL_COUNT, val)
+#define bfin_read_DMA10_CURR_BWL_COUNT()	bfin_read32(DMA10_CURR_BWL_COUNT)
+#define bfin_write_DMA10_CURR_BWL_COUNT(val)	bfin_write32(DMA10_CURR_BWL_COUNT, val)
+#define bfin_read_DMA10_BWM_COUNT()		bfin_read32(DMA10_BWM_COUNT)
+#define bfin_write_DMA10_BWM_COUNT(val)		bfin_write32(DMA10_BWM_COUNT, val)
+#define bfin_read_DMA10_CURR_BWM_COUNT()	bfin_read32(DMA10_CURR_BWM_COUNT)
+#define bfin_write_DMA10_CURR_BWM_COUNT(val)	bfin_write32(DMA10_CURR_BWM_COUNT, val)
+
+/* DMA Channel 11 Registers */
+
+#define bfin_read_DMA11_NEXT_DESC_PTR() 	bfin_read32(DMA11_NEXT_DESC_PTR)
+#define bfin_write_DMA11_NEXT_DESC_PTR(val) 	bfin_write32(DMA11_NEXT_DESC_PTR, val)
+#define bfin_read_DMA11_START_ADDR() 		bfin_read32(DMA11_START_ADDR)
+#define bfin_write_DMA11_START_ADDR(val) 	bfin_write32(DMA11_START_ADDR, val)
+#define bfin_read_DMA11_CONFIG()		bfin_read32(DMA11_CONFIG)
+#define bfin_write_DMA11_CONFIG(val)		bfin_write32(DMA11_CONFIG, val)
+#define bfin_read_DMA11_X_COUNT()		bfin_read32(DMA11_X_COUNT)
+#define bfin_write_DMA11_X_COUNT(val)		bfin_write32(DMA11_X_COUNT, val)
+#define bfin_read_DMA11_X_MODIFY()		bfin_read32(DMA11_X_MODIFY)
+#define bfin_write_DMA11_X_MODIFY(val) 		bfin_write32(DMA11_X_MODIFY, val)
+#define bfin_read_DMA11_Y_COUNT()		bfin_read32(DMA11_Y_COUNT)
+#define bfin_write_DMA11_Y_COUNT(val)		bfin_write32(DMA11_Y_COUNT, val)
+#define bfin_read_DMA11_Y_MODIFY()		bfin_read32(DMA11_Y_MODIFY)
+#define bfin_write_DMA11_Y_MODIFY(val) 		bfin_write32(DMA11_Y_MODIFY, val)
+#define bfin_read_DMA11_CURR_DESC_PTR() 	bfin_read32(DMA11_CURR_DESC_PTR)
+#define bfin_write_DMA11_CURR_DESC_PTR(val) 	bfin_write32(DMA11_CURR_DESC_PTR, val)
+#define bfin_read_DMA11_PREV_DESC_PTR() 	bfin_read32(DMA11_PREV_DESC_PTR)
+#define bfin_write_DMA11_PREV_DESC_PTR(val) 	bfin_write32(DMA11_PREV_DESC_PTR, val)
+#define bfin_read_DMA11_CURR_ADDR() 		bfin_read32(DMA11_CURR_ADDR)
+#define bfin_write_DMA11_CURR_ADDR(val) 	bfin_write32(DMA11_CURR_ADDR, val)
+#define bfin_read_DMA11_IRQ_STATUS()		bfin_read32(DMA11_IRQ_STATUS)
+#define bfin_write_DMA11_IRQ_STATUS(val)	bfin_write32(DMA11_IRQ_STATUS, val)
+#define bfin_read_DMA11_CURR_X_COUNT()		bfin_read32(DMA11_CURR_X_COUNT)
+#define bfin_write_DMA11_CURR_X_COUNT(val)	bfin_write32(DMA11_CURR_X_COUNT, val)
+#define bfin_read_DMA11_CURR_Y_COUNT()		bfin_read32(DMA11_CURR_Y_COUNT)
+#define bfin_write_DMA11_CURR_Y_COUNT(val)	bfin_write32(DMA11_CURR_Y_COUNT, val)
+#define bfin_read_DMA11_BWL_COUNT()		bfin_read32(DMA11_BWL_COUNT)
+#define bfin_write_DMA11_BWL_COUNT(val)		bfin_write32(DMA11_BWL_COUNT, val)
+#define bfin_read_DMA11_CURR_BWL_COUNT()	bfin_read32(DMA11_CURR_BWL_COUNT)
+#define bfin_write_DMA11_CURR_BWL_COUNT(val)	bfin_write32(DMA11_CURR_BWL_COUNT, val)
+#define bfin_read_DMA11_BWM_COUNT()		bfin_read32(DMA11_BWM_COUNT)
+#define bfin_write_DMA11_BWM_COUNT(val)		bfin_write32(DMA11_BWM_COUNT, val)
+#define bfin_read_DMA11_CURR_BWM_COUNT()	bfin_read32(DMA11_CURR_BWM_COUNT)
+#define bfin_write_DMA11_CURR_BWM_COUNT(val)	bfin_write32(DMA11_CURR_BWM_COUNT, val)
+
+/* DMA Channel 12 Registers */
+
+#define bfin_read_DMA12_NEXT_DESC_PTR() 	bfin_read32(DMA12_NEXT_DESC_PTR)
+#define bfin_write_DMA12_NEXT_DESC_PTR(val) 	bfin_write32(DMA12_NEXT_DESC_PTR, val)
+#define bfin_read_DMA12_START_ADDR() 		bfin_read32(DMA12_START_ADDR)
+#define bfin_write_DMA12_START_ADDR(val) 	bfin_write32(DMA12_START_ADDR, val)
+#define bfin_read_DMA12_CONFIG()		bfin_read32(DMA12_CONFIG)
+#define bfin_write_DMA12_CONFIG(val)		bfin_write32(DMA12_CONFIG, val)
+#define bfin_read_DMA12_X_COUNT()		bfin_read32(DMA12_X_COUNT)
+#define bfin_write_DMA12_X_COUNT(val)		bfin_write32(DMA12_X_COUNT, val)
+#define bfin_read_DMA12_X_MODIFY()		bfin_read32(DMA12_X_MODIFY)
+#define bfin_write_DMA12_X_MODIFY(val) 		bfin_write32(DMA12_X_MODIFY, val)
+#define bfin_read_DMA12_Y_COUNT()		bfin_read32(DMA12_Y_COUNT)
+#define bfin_write_DMA12_Y_COUNT(val)		bfin_write32(DMA12_Y_COUNT, val)
+#define bfin_read_DMA12_Y_MODIFY()		bfin_read32(DMA12_Y_MODIFY)
+#define bfin_write_DMA12_Y_MODIFY(val) 		bfin_write32(DMA12_Y_MODIFY, val)
+#define bfin_read_DMA12_CURR_DESC_PTR() 	bfin_read32(DMA12_CURR_DESC_PTR)
+#define bfin_write_DMA12_CURR_DESC_PTR(val) 	bfin_write32(DMA12_CURR_DESC_PTR, val)
+#define bfin_read_DMA12_PREV_DESC_PTR() 	bfin_read32(DMA12_PREV_DESC_PTR)
+#define bfin_write_DMA12_PREV_DESC_PTR(val) 	bfin_write32(DMA12_PREV_DESC_PTR, val)
+#define bfin_read_DMA12_CURR_ADDR() 		bfin_read32(DMA12_CURR_ADDR)
+#define bfin_write_DMA12_CURR_ADDR(val) 	bfin_write32(DMA12_CURR_ADDR, val)
+#define bfin_read_DMA12_IRQ_STATUS()		bfin_read32(DMA12_IRQ_STATUS)
+#define bfin_write_DMA12_IRQ_STATUS(val)	bfin_write32(DMA12_IRQ_STATUS, val)
+#define bfin_read_DMA12_CURR_X_COUNT()		bfin_read32(DMA12_CURR_X_COUNT)
+#define bfin_write_DMA12_CURR_X_COUNT(val)	bfin_write32(DMA12_CURR_X_COUNT, val)
+#define bfin_read_DMA12_CURR_Y_COUNT()		bfin_read32(DMA12_CURR_Y_COUNT)
+#define bfin_write_DMA12_CURR_Y_COUNT(val)	bfin_write32(DMA12_CURR_Y_COUNT, val)
+#define bfin_read_DMA12_BWL_COUNT()		bfin_read32(DMA12_BWL_COUNT)
+#define bfin_write_DMA12_BWL_COUNT(val)		bfin_write32(DMA12_BWL_COUNT, val)
+#define bfin_read_DMA12_CURR_BWL_COUNT()	bfin_read32(DMA12_CURR_BWL_COUNT)
+#define bfin_write_DMA12_CURR_BWL_COUNT(val)	bfin_write32(DMA12_CURR_BWL_COUNT, val)
+#define bfin_read_DMA12_BWM_COUNT()		bfin_read32(DMA12_BWM_COUNT)
+#define bfin_write_DMA12_BWM_COUNT(val)		bfin_write32(DMA12_BWM_COUNT, val)
+#define bfin_read_DMA12_CURR_BWM_COUNT()	bfin_read32(DMA12_CURR_BWM_COUNT)
+#define bfin_write_DMA12_CURR_BWM_COUNT(val)	bfin_write32(DMA12_CURR_BWM_COUNT, val)
+
+/* DMA Channel 13 Registers */
+
+#define bfin_read_DMA13_NEXT_DESC_PTR() 	bfin_read32(DMA13_NEXT_DESC_PTR)
+#define bfin_write_DMA13_NEXT_DESC_PTR(val) 	bfin_write32(DMA13_NEXT_DESC_PTR, val)
+#define bfin_read_DMA13_START_ADDR() 		bfin_read32(DMA13_START_ADDR)
+#define bfin_write_DMA13_START_ADDR(val) 	bfin_write32(DMA13_START_ADDR, val)
+#define bfin_read_DMA13_CONFIG()		bfin_read32(DMA13_CONFIG)
+#define bfin_write_DMA13_CONFIG(val)		bfin_write32(DMA13_CONFIG, val)
+#define bfin_read_DMA13_X_COUNT()		bfin_read32(DMA13_X_COUNT)
+#define bfin_write_DMA13_X_COUNT(val)		bfin_write32(DMA13_X_COUNT, val)
+#define bfin_read_DMA13_X_MODIFY()		bfin_read32(DMA13_X_MODIFY)
+#define bfin_write_DMA13_X_MODIFY(val) 		bfin_write32(DMA13_X_MODIFY, val)
+#define bfin_read_DMA13_Y_COUNT()		bfin_read32(DMA13_Y_COUNT)
+#define bfin_write_DMA13_Y_COUNT(val)		bfin_write32(DMA13_Y_COUNT, val)
+#define bfin_read_DMA13_Y_MODIFY()		bfin_read32(DMA13_Y_MODIFY)
+#define bfin_write_DMA13_Y_MODIFY(val) 		bfin_write32(DMA13_Y_MODIFY, val)
+#define bfin_read_DMA13_CURR_DESC_PTR() 	bfin_read32(DMA13_CURR_DESC_PTR)
+#define bfin_write_DMA13_CURR_DESC_PTR(val) 	bfin_write32(DMA13_CURR_DESC_PTR, val)
+#define bfin_read_DMA13_PREV_DESC_PTR() 	bfin_read32(DMA13_PREV_DESC_PTR)
+#define bfin_write_DMA13_PREV_DESC_PTR(val) 	bfin_write32(DMA13_PREV_DESC_PTR, val)
+#define bfin_read_DMA13_CURR_ADDR() 		bfin_read32(DMA13_CURR_ADDR)
+#define bfin_write_DMA13_CURR_ADDR(val) 	bfin_write32(DMA13_CURR_ADDR, val)
+#define bfin_read_DMA13_IRQ_STATUS()		bfin_read32(DMA13_IRQ_STATUS)
+#define bfin_write_DMA13_IRQ_STATUS(val)	bfin_write32(DMA13_IRQ_STATUS, val)
+#define bfin_read_DMA13_CURR_X_COUNT()		bfin_read32(DMA13_CURR_X_COUNT)
+#define bfin_write_DMA13_CURR_X_COUNT(val)	bfin_write32(DMA13_CURR_X_COUNT, val)
+#define bfin_read_DMA13_CURR_Y_COUNT()		bfin_read32(DMA13_CURR_Y_COUNT)
+#define bfin_write_DMA13_CURR_Y_COUNT(val)	bfin_write32(DMA13_CURR_Y_COUNT, val)
+#define bfin_read_DMA13_BWL_COUNT()		bfin_read32(DMA13_BWL_COUNT)
+#define bfin_write_DMA13_BWL_COUNT(val)		bfin_write32(DMA13_BWL_COUNT, val)
+#define bfin_read_DMA13_CURR_BWL_COUNT()	bfin_read32(DMA13_CURR_BWL_COUNT)
+#define bfin_write_DMA13_CURR_BWL_COUNT(val)	bfin_write32(DMA13_CURR_BWL_COUNT, val)
+#define bfin_read_DMA13_BWM_COUNT()		bfin_read32(DMA13_BWM_COUNT)
+#define bfin_write_DMA13_BWM_COUNT(val)		bfin_write32(DMA13_BWM_COUNT, val)
+#define bfin_read_DMA13_CURR_BWM_COUNT()	bfin_read32(DMA13_CURR_BWM_COUNT)
+#define bfin_write_DMA13_CURR_BWM_COUNT(val)	bfin_write32(DMA13_CURR_BWM_COUNT, val)
+
+/* DMA Channel 14 Registers */
+
+#define bfin_read_DMA14_NEXT_DESC_PTR() 	bfin_read32(DMA14_NEXT_DESC_PTR)
+#define bfin_write_DMA14_NEXT_DESC_PTR(val) 	bfin_write32(DMA14_NEXT_DESC_PTR, val)
+#define bfin_read_DMA14_START_ADDR() 		bfin_read32(DMA14_START_ADDR)
+#define bfin_write_DMA14_START_ADDR(val) 	bfin_write32(DMA14_START_ADDR, val)
+#define bfin_read_DMA14_CONFIG()		bfin_read32(DMA14_CONFIG)
+#define bfin_write_DMA14_CONFIG(val)		bfin_write32(DMA14_CONFIG, val)
+#define bfin_read_DMA14_X_COUNT()		bfin_read32(DMA14_X_COUNT)
+#define bfin_write_DMA14_X_COUNT(val)		bfin_write32(DMA14_X_COUNT, val)
+#define bfin_read_DMA14_X_MODIFY()		bfin_read32(DMA14_X_MODIFY)
+#define bfin_write_DMA14_X_MODIFY(val) 		bfin_write32(DMA14_X_MODIFY, val)
+#define bfin_read_DMA14_Y_COUNT()		bfin_read32(DMA14_Y_COUNT)
+#define bfin_write_DMA14_Y_COUNT(val)		bfin_write32(DMA14_Y_COUNT, val)
+#define bfin_read_DMA14_Y_MODIFY()		bfin_read32(DMA14_Y_MODIFY)
+#define bfin_write_DMA14_Y_MODIFY(val) 		bfin_write32(DMA14_Y_MODIFY, val)
+#define bfin_read_DMA14_CURR_DESC_PTR() 	bfin_read32(DMA14_CURR_DESC_PTR)
+#define bfin_write_DMA14_CURR_DESC_PTR(val) 	bfin_write32(DMA14_CURR_DESC_PTR, val)
+#define bfin_read_DMA14_PREV_DESC_PTR() 	bfin_read32(DMA14_PREV_DESC_PTR)
+#define bfin_write_DMA14_PREV_DESC_PTR(val) 	bfin_write32(DMA14_PREV_DESC_PTR, val)
+#define bfin_read_DMA14_CURR_ADDR() 		bfin_read32(DMA14_CURR_ADDR)
+#define bfin_write_DMA14_CURR_ADDR(val) 	bfin_write32(DMA14_CURR_ADDR, val)
+#define bfin_read_DMA14_IRQ_STATUS()		bfin_read32(DMA14_IRQ_STATUS)
+#define bfin_write_DMA14_IRQ_STATUS(val)	bfin_write32(DMA14_IRQ_STATUS, val)
+#define bfin_read_DMA14_CURR_X_COUNT()		bfin_read32(DMA14_CURR_X_COUNT)
+#define bfin_write_DMA14_CURR_X_COUNT(val)	bfin_write32(DMA14_CURR_X_COUNT, val)
+#define bfin_read_DMA14_CURR_Y_COUNT()		bfin_read32(DMA14_CURR_Y_COUNT)
+#define bfin_write_DMA14_CURR_Y_COUNT(val)	bfin_write32(DMA14_CURR_Y_COUNT, val)
+#define bfin_read_DMA14_BWL_COUNT()		bfin_read32(DMA14_BWL_COUNT)
+#define bfin_write_DMA14_BWL_COUNT(val)		bfin_write32(DMA14_BWL_COUNT, val)
+#define bfin_read_DMA14_CURR_BWL_COUNT()	bfin_read32(DMA14_CURR_BWL_COUNT)
+#define bfin_write_DMA14_CURR_BWL_COUNT(val)	bfin_write32(DMA14_CURR_BWL_COUNT, val)
+#define bfin_read_DMA14_BWM_COUNT()		bfin_read32(DMA14_BWM_COUNT)
+#define bfin_write_DMA14_BWM_COUNT(val)		bfin_write32(DMA14_BWM_COUNT, val)
+#define bfin_read_DMA14_CURR_BWM_COUNT()	bfin_read32(DMA14_CURR_BWM_COUNT)
+#define bfin_write_DMA14_CURR_BWM_COUNT(val)	bfin_write32(DMA14_CURR_BWM_COUNT, val)
+
+/* DMA Channel 15 Registers */
+
+#define bfin_read_DMA15_NEXT_DESC_PTR() 	bfin_read32(DMA15_NEXT_DESC_PTR)
+#define bfin_write_DMA15_NEXT_DESC_PTR(val) 	bfin_write32(DMA15_NEXT_DESC_PTR, val)
+#define bfin_read_DMA15_START_ADDR() 		bfin_read32(DMA15_START_ADDR)
+#define bfin_write_DMA15_START_ADDR(val) 	bfin_write32(DMA15_START_ADDR, val)
+#define bfin_read_DMA15_CONFIG()		bfin_read32(DMA15_CONFIG)
+#define bfin_write_DMA15_CONFIG(val)		bfin_write32(DMA15_CONFIG, val)
+#define bfin_read_DMA15_X_COUNT()		bfin_read32(DMA15_X_COUNT)
+#define bfin_write_DMA15_X_COUNT(val)		bfin_write32(DMA15_X_COUNT, val)
+#define bfin_read_DMA15_X_MODIFY()		bfin_read32(DMA15_X_MODIFY)
+#define bfin_write_DMA15_X_MODIFY(val) 		bfin_write32(DMA15_X_MODIFY, val)
+#define bfin_read_DMA15_Y_COUNT()		bfin_read32(DMA15_Y_COUNT)
+#define bfin_write_DMA15_Y_COUNT(val)		bfin_write32(DMA15_Y_COUNT, val)
+#define bfin_read_DMA15_Y_MODIFY()		bfin_read32(DMA15_Y_MODIFY)
+#define bfin_write_DMA15_Y_MODIFY(val) 		bfin_write32(DMA15_Y_MODIFY, val)
+#define bfin_read_DMA15_CURR_DESC_PTR() 	bfin_read32(DMA15_CURR_DESC_PTR)
+#define bfin_write_DMA15_CURR_DESC_PTR(val) 	bfin_write32(DMA15_CURR_DESC_PTR, val)
+#define bfin_read_DMA15_PREV_DESC_PTR() 	bfin_read32(DMA15_PREV_DESC_PTR)
+#define bfin_write_DMA15_PREV_DESC_PTR(val) 	bfin_write32(DMA15_PREV_DESC_PTR, val)
+#define bfin_read_DMA15_CURR_ADDR() 		bfin_read32(DMA15_CURR_ADDR)
+#define bfin_write_DMA15_CURR_ADDR(val) 	bfin_write32(DMA15_CURR_ADDR, val)
+#define bfin_read_DMA15_IRQ_STATUS()		bfin_read32(DMA15_IRQ_STATUS)
+#define bfin_write_DMA15_IRQ_STATUS(val)	bfin_write32(DMA15_IRQ_STATUS, val)
+#define bfin_read_DMA15_CURR_X_COUNT()		bfin_read32(DMA15_CURR_X_COUNT)
+#define bfin_write_DMA15_CURR_X_COUNT(val)	bfin_write32(DMA15_CURR_X_COUNT, val)
+#define bfin_read_DMA15_CURR_Y_COUNT()		bfin_read32(DMA15_CURR_Y_COUNT)
+#define bfin_write_DMA15_CURR_Y_COUNT(val)	bfin_write32(DMA15_CURR_Y_COUNT, val)
+#define bfin_read_DMA15_BWL_COUNT()		bfin_read32(DMA15_BWL_COUNT)
+#define bfin_write_DMA15_BWL_COUNT(val)		bfin_write32(DMA15_BWL_COUNT, val)
+#define bfin_read_DMA15_CURR_BWL_COUNT()	bfin_read32(DMA15_CURR_BWL_COUNT)
+#define bfin_write_DMA15_CURR_BWL_COUNT(val)	bfin_write32(DMA15_CURR_BWL_COUNT, val)
+#define bfin_read_DMA15_BWM_COUNT()		bfin_read32(DMA15_BWM_COUNT)
+#define bfin_write_DMA15_BWM_COUNT(val)		bfin_write32(DMA15_BWM_COUNT, val)
+#define bfin_read_DMA15_CURR_BWM_COUNT()	bfin_read32(DMA15_CURR_BWM_COUNT)
+#define bfin_write_DMA15_CURR_BWM_COUNT(val)	bfin_write32(DMA15_CURR_BWM_COUNT, val)
+
+/* DMA Channel 16 Registers */
+
+#define bfin_read_DMA16_NEXT_DESC_PTR() 	bfin_read32(DMA16_NEXT_DESC_PTR)
+#define bfin_write_DMA16_NEXT_DESC_PTR(val) 	bfin_write32(DMA16_NEXT_DESC_PTR, val)
+#define bfin_read_DMA16_START_ADDR() 		bfin_read32(DMA16_START_ADDR)
+#define bfin_write_DMA16_START_ADDR(val) 	bfin_write32(DMA16_START_ADDR, val)
+#define bfin_read_DMA16_CONFIG()		bfin_read32(DMA16_CONFIG)
+#define bfin_write_DMA16_CONFIG(val)		bfin_write32(DMA16_CONFIG, val)
+#define bfin_read_DMA16_X_COUNT()		bfin_read32(DMA16_X_COUNT)
+#define bfin_write_DMA16_X_COUNT(val)		bfin_write32(DMA16_X_COUNT, val)
+#define bfin_read_DMA16_X_MODIFY()		bfin_read32(DMA16_X_MODIFY)
+#define bfin_write_DMA16_X_MODIFY(val) 		bfin_write32(DMA16_X_MODIFY, val)
+#define bfin_read_DMA16_Y_COUNT()		bfin_read32(DMA16_Y_COUNT)
+#define bfin_write_DMA16_Y_COUNT(val)		bfin_write32(DMA16_Y_COUNT, val)
+#define bfin_read_DMA16_Y_MODIFY()		bfin_read32(DMA16_Y_MODIFY)
+#define bfin_write_DMA16_Y_MODIFY(val) 		bfin_write32(DMA16_Y_MODIFY, val)
+#define bfin_read_DMA16_CURR_DESC_PTR() 	bfin_read32(DMA16_CURR_DESC_PTR)
+#define bfin_write_DMA16_CURR_DESC_PTR(val) 	bfin_write32(DMA16_CURR_DESC_PTR, val)
+#define bfin_read_DMA16_PREV_DESC_PTR() 	bfin_read32(DMA16_PREV_DESC_PTR)
+#define bfin_write_DMA16_PREV_DESC_PTR(val) 	bfin_write32(DMA16_PREV_DESC_PTR, val)
+#define bfin_read_DMA16_CURR_ADDR() 		bfin_read32(DMA16_CURR_ADDR)
+#define bfin_write_DMA16_CURR_ADDR(val) 	bfin_write32(DMA16_CURR_ADDR, val)
+#define bfin_read_DMA16_IRQ_STATUS()		bfin_read32(DMA16_IRQ_STATUS)
+#define bfin_write_DMA16_IRQ_STATUS(val)	bfin_write32(DMA16_IRQ_STATUS, val)
+#define bfin_read_DMA16_CURR_X_COUNT()		bfin_read32(DMA16_CURR_X_COUNT)
+#define bfin_write_DMA16_CURR_X_COUNT(val)	bfin_write32(DMA16_CURR_X_COUNT, val)
+#define bfin_read_DMA16_CURR_Y_COUNT()		bfin_read32(DMA16_CURR_Y_COUNT)
+#define bfin_write_DMA16_CURR_Y_COUNT(val)	bfin_write32(DMA16_CURR_Y_COUNT, val)
+#define bfin_read_DMA16_BWL_COUNT()		bfin_read32(DMA16_BWL_COUNT)
+#define bfin_write_DMA16_BWL_COUNT(val)		bfin_write32(DMA16_BWL_COUNT, val)
+#define bfin_read_DMA16_CURR_BWL_COUNT()	bfin_read32(DMA16_CURR_BWL_COUNT)
+#define bfin_write_DMA16_CURR_BWL_COUNT(val)	bfin_write32(DMA16_CURR_BWL_COUNT, val)
+#define bfin_read_DMA16_BWM_COUNT()		bfin_read32(DMA16_BWM_COUNT)
+#define bfin_write_DMA16_BWM_COUNT(val)		bfin_write32(DMA16_BWM_COUNT, val)
+#define bfin_read_DMA16_CURR_BWM_COUNT()	bfin_read32(DMA16_CURR_BWM_COUNT)
+#define bfin_write_DMA16_CURR_BWM_COUNT(val)	bfin_write32(DMA16_CURR_BWM_COUNT, val)
+
+/* DMA Channel 17 Registers */
+
+#define bfin_read_DMA17_NEXT_DESC_PTR() 	bfin_read32(DMA17_NEXT_DESC_PTR)
+#define bfin_write_DMA17_NEXT_DESC_PTR(val) 	bfin_write32(DMA17_NEXT_DESC_PTR, val)
+#define bfin_read_DMA17_START_ADDR() 		bfin_read32(DMA17_START_ADDR)
+#define bfin_write_DMA17_START_ADDR(val) 	bfin_write32(DMA17_START_ADDR, val)
+#define bfin_read_DMA17_CONFIG()		bfin_read32(DMA17_CONFIG)
+#define bfin_write_DMA17_CONFIG(val)		bfin_write32(DMA17_CONFIG, val)
+#define bfin_read_DMA17_X_COUNT()		bfin_read32(DMA17_X_COUNT)
+#define bfin_write_DMA17_X_COUNT(val)		bfin_write32(DMA17_X_COUNT, val)
+#define bfin_read_DMA17_X_MODIFY()		bfin_read32(DMA17_X_MODIFY)
+#define bfin_write_DMA17_X_MODIFY(val) 		bfin_write32(DMA17_X_MODIFY, val)
+#define bfin_read_DMA17_Y_COUNT()		bfin_read32(DMA17_Y_COUNT)
+#define bfin_write_DMA17_Y_COUNT(val)		bfin_write32(DMA17_Y_COUNT, val)
+#define bfin_read_DMA17_Y_MODIFY()		bfin_read32(DMA17_Y_MODIFY)
+#define bfin_write_DMA17_Y_MODIFY(val) 		bfin_write32(DMA17_Y_MODIFY, val)
+#define bfin_read_DMA17_CURR_DESC_PTR() 	bfin_read32(DMA17_CURR_DESC_PTR)
+#define bfin_write_DMA17_CURR_DESC_PTR(val) 	bfin_write32(DMA17_CURR_DESC_PTR, val)
+#define bfin_read_DMA17_PREV_DESC_PTR() 	bfin_read32(DMA17_PREV_DESC_PTR)
+#define bfin_write_DMA17_PREV_DESC_PTR(val) 	bfin_write32(DMA17_PREV_DESC_PTR, val)
+#define bfin_read_DMA17_CURR_ADDR() 		bfin_read32(DMA17_CURR_ADDR)
+#define bfin_write_DMA17_CURR_ADDR(val) 	bfin_write32(DMA17_CURR_ADDR, val)
+#define bfin_read_DMA17_IRQ_STATUS()		bfin_read32(DMA17_IRQ_STATUS)
+#define bfin_write_DMA17_IRQ_STATUS(val)	bfin_write32(DMA17_IRQ_STATUS, val)
+#define bfin_read_DMA17_CURR_X_COUNT()		bfin_read32(DMA17_CURR_X_COUNT)
+#define bfin_write_DMA17_CURR_X_COUNT(val)	bfin_write32(DMA17_CURR_X_COUNT, val)
+#define bfin_read_DMA17_CURR_Y_COUNT()		bfin_read32(DMA17_CURR_Y_COUNT)
+#define bfin_write_DMA17_CURR_Y_COUNT(val)	bfin_write32(DMA17_CURR_Y_COUNT, val)
+#define bfin_read_DMA17_BWL_COUNT()		bfin_read32(DMA17_BWL_COUNT)
+#define bfin_write_DMA17_BWL_COUNT(val)		bfin_write32(DMA17_BWL_COUNT, val)
+#define bfin_read_DMA17_CURR_BWL_COUNT()	bfin_read32(DMA17_CURR_BWL_COUNT)
+#define bfin_write_DMA17_CURR_BWL_COUNT(val)	bfin_write32(DMA17_CURR_BWL_COUNT, val)
+#define bfin_read_DMA17_BWM_COUNT()		bfin_read32(DMA17_BWM_COUNT)
+#define bfin_write_DMA17_BWM_COUNT(val)		bfin_write32(DMA17_BWM_COUNT, val)
+#define bfin_read_DMA17_CURR_BWM_COUNT()	bfin_read32(DMA17_CURR_BWM_COUNT)
+#define bfin_write_DMA17_CURR_BWM_COUNT(val)	bfin_write32(DMA17_CURR_BWM_COUNT, val)
+
+/* DMA Channel 18 Registers */
+
+#define bfin_read_DMA18_NEXT_DESC_PTR() 	bfin_read32(DMA18_NEXT_DESC_PTR)
+#define bfin_write_DMA18_NEXT_DESC_PTR(val) 	bfin_write32(DMA18_NEXT_DESC_PTR, val)
+#define bfin_read_DMA18_START_ADDR() 		bfin_read32(DMA18_START_ADDR)
+#define bfin_write_DMA18_START_ADDR(val) 	bfin_write32(DMA18_START_ADDR, val)
+#define bfin_read_DMA18_CONFIG()		bfin_read32(DMA18_CONFIG)
+#define bfin_write_DMA18_CONFIG(val)		bfin_write32(DMA18_CONFIG, val)
+#define bfin_read_DMA18_X_COUNT()		bfin_read32(DMA18_X_COUNT)
+#define bfin_write_DMA18_X_COUNT(val)		bfin_write32(DMA18_X_COUNT, val)
+#define bfin_read_DMA18_X_MODIFY()		bfin_read32(DMA18_X_MODIFY)
+#define bfin_write_DMA18_X_MODIFY(val) 		bfin_write32(DMA18_X_MODIFY, val)
+#define bfin_read_DMA18_Y_COUNT()		bfin_read32(DMA18_Y_COUNT)
+#define bfin_write_DMA18_Y_COUNT(val)		bfin_write32(DMA18_Y_COUNT, val)
+#define bfin_read_DMA18_Y_MODIFY()		bfin_read32(DMA18_Y_MODIFY)
+#define bfin_write_DMA18_Y_MODIFY(val) 		bfin_write32(DMA18_Y_MODIFY, val)
+#define bfin_read_DMA18_CURR_DESC_PTR() 	bfin_read32(DMA18_CURR_DESC_PTR)
+#define bfin_write_DMA18_CURR_DESC_PTR(val) 	bfin_write32(DMA18_CURR_DESC_PTR, val)
+#define bfin_read_DMA18_PREV_DESC_PTR() 	bfin_read32(DMA18_PREV_DESC_PTR)
+#define bfin_write_DMA18_PREV_DESC_PTR(val) 	bfin_write32(DMA18_PREV_DESC_PTR, val)
+#define bfin_read_DMA18_CURR_ADDR() 		bfin_read32(DMA18_CURR_ADDR)
+#define bfin_write_DMA18_CURR_ADDR(val) 	bfin_write32(DMA18_CURR_ADDR, val)
+#define bfin_read_DMA18_IRQ_STATUS()		bfin_read32(DMA18_IRQ_STATUS)
+#define bfin_write_DMA18_IRQ_STATUS(val)	bfin_write32(DMA18_IRQ_STATUS, val)
+#define bfin_read_DMA18_CURR_X_COUNT()		bfin_read32(DMA18_CURR_X_COUNT)
+#define bfin_write_DMA18_CURR_X_COUNT(val)	bfin_write32(DMA18_CURR_X_COUNT, val)
+#define bfin_read_DMA18_CURR_Y_COUNT()		bfin_read32(DMA18_CURR_Y_COUNT)
+#define bfin_write_DMA18_CURR_Y_COUNT(val)	bfin_write32(DMA18_CURR_Y_COUNT, val)
+#define bfin_read_DMA18_BWL_COUNT()		bfin_read32(DMA18_BWL_COUNT)
+#define bfin_write_DMA18_BWL_COUNT(val)		bfin_write32(DMA18_BWL_COUNT, val)
+#define bfin_read_DMA18_CURR_BWL_COUNT()	bfin_read32(DMA18_CURR_BWL_COUNT)
+#define bfin_write_DMA18_CURR_BWL_COUNT(val)	bfin_write32(DMA18_CURR_BWL_COUNT, val)
+#define bfin_read_DMA18_BWM_COUNT()		bfin_read32(DMA18_BWM_COUNT)
+#define bfin_write_DMA18_BWM_COUNT(val)		bfin_write32(DMA18_BWM_COUNT, val)
+#define bfin_read_DMA18_CURR_BWM_COUNT()	bfin_read32(DMA18_CURR_BWM_COUNT)
+#define bfin_write_DMA18_CURR_BWM_COUNT(val)	bfin_write32(DMA18_CURR_BWM_COUNT, val)
+
+/* DMA Channel 19 Registers */
+
+#define bfin_read_DMA19_NEXT_DESC_PTR() 	bfin_read32(DMA19_NEXT_DESC_PTR)
+#define bfin_write_DMA19_NEXT_DESC_PTR(val) 	bfin_write32(DMA19_NEXT_DESC_PTR, val)
+#define bfin_read_DMA19_START_ADDR() 		bfin_read32(DMA19_START_ADDR)
+#define bfin_write_DMA19_START_ADDR(val) 	bfin_write32(DMA19_START_ADDR, val)
+#define bfin_read_DMA19_CONFIG()		bfin_read32(DMA19_CONFIG)
+#define bfin_write_DMA19_CONFIG(val)		bfin_write32(DMA19_CONFIG, val)
+#define bfin_read_DMA19_X_COUNT()		bfin_read32(DMA19_X_COUNT)
+#define bfin_write_DMA19_X_COUNT(val)		bfin_write32(DMA19_X_COUNT, val)
+#define bfin_read_DMA19_X_MODIFY()		bfin_read32(DMA19_X_MODIFY)
+#define bfin_write_DMA19_X_MODIFY(val) 		bfin_write32(DMA19_X_MODIFY, val)
+#define bfin_read_DMA19_Y_COUNT()		bfin_read32(DMA19_Y_COUNT)
+#define bfin_write_DMA19_Y_COUNT(val)		bfin_write32(DMA19_Y_COUNT, val)
+#define bfin_read_DMA19_Y_MODIFY()		bfin_read32(DMA19_Y_MODIFY)
+#define bfin_write_DMA19_Y_MODIFY(val) 		bfin_write32(DMA19_Y_MODIFY, val)
+#define bfin_read_DMA19_CURR_DESC_PTR() 	bfin_read32(DMA19_CURR_DESC_PTR)
+#define bfin_write_DMA19_CURR_DESC_PTR(val) 	bfin_write32(DMA19_CURR_DESC_PTR, val)
+#define bfin_read_DMA19_PREV_DESC_PTR() 	bfin_read32(DMA19_PREV_DESC_PTR)
+#define bfin_write_DMA19_PREV_DESC_PTR(val) 	bfin_write32(DMA19_PREV_DESC_PTR, val)
+#define bfin_read_DMA19_CURR_ADDR() 		bfin_read32(DMA19_CURR_ADDR)
+#define bfin_write_DMA19_CURR_ADDR(val) 	bfin_write32(DMA19_CURR_ADDR, val)
+#define bfin_read_DMA19_IRQ_STATUS()		bfin_read32(DMA19_IRQ_STATUS)
+#define bfin_write_DMA19_IRQ_STATUS(val)	bfin_write32(DMA19_IRQ_STATUS, val)
+#define bfin_read_DMA19_CURR_X_COUNT()		bfin_read32(DMA19_CURR_X_COUNT)
+#define bfin_write_DMA19_CURR_X_COUNT(val)	bfin_write32(DMA19_CURR_X_COUNT, val)
+#define bfin_read_DMA19_CURR_Y_COUNT()		bfin_read32(DMA19_CURR_Y_COUNT)
+#define bfin_write_DMA19_CURR_Y_COUNT(val)	bfin_write32(DMA19_CURR_Y_COUNT, val)
+#define bfin_read_DMA19_BWL_COUNT()		bfin_read32(DMA19_BWL_COUNT)
+#define bfin_write_DMA19_BWL_COUNT(val)		bfin_write32(DMA19_BWL_COUNT, val)
+#define bfin_read_DMA19_CURR_BWL_COUNT()	bfin_read32(DMA19_CURR_BWL_COUNT)
+#define bfin_write_DMA19_CURR_BWL_COUNT(val)	bfin_write32(DMA19_CURR_BWL_COUNT, val)
+#define bfin_read_DMA19_BWM_COUNT()		bfin_read32(DMA19_BWM_COUNT)
+#define bfin_write_DMA19_BWM_COUNT(val)		bfin_write32(DMA19_BWM_COUNT, val)
+#define bfin_read_DMA19_CURR_BWM_COUNT()	bfin_read32(DMA19_CURR_BWM_COUNT)
+#define bfin_write_DMA19_CURR_BWM_COUNT(val)	bfin_write32(DMA19_CURR_BWM_COUNT, val)
+
+/* DMA Channel 20 Registers */
+
+#define bfin_read_DMA20_NEXT_DESC_PTR() 	bfin_read32(DMA20_NEXT_DESC_PTR)
+#define bfin_write_DMA20_NEXT_DESC_PTR(val) 	bfin_write32(DMA20_NEXT_DESC_PTR, val)
+#define bfin_read_DMA20_START_ADDR() 		bfin_read32(DMA20_START_ADDR)
+#define bfin_write_DMA20_START_ADDR(val) 	bfin_write32(DMA20_START_ADDR, val)
+#define bfin_read_DMA20_CONFIG()		bfin_read32(DMA20_CONFIG)
+#define bfin_write_DMA20_CONFIG(val)		bfin_write32(DMA20_CONFIG, val)
+#define bfin_read_DMA20_X_COUNT()		bfin_read32(DMA20_X_COUNT)
+#define bfin_write_DMA20_X_COUNT(val)		bfin_write32(DMA20_X_COUNT, val)
+#define bfin_read_DMA20_X_MODIFY()		bfin_read32(DMA20_X_MODIFY)
+#define bfin_write_DMA20_X_MODIFY(val) 		bfin_write32(DMA20_X_MODIFY, val)
+#define bfin_read_DMA20_Y_COUNT()		bfin_read32(DMA20_Y_COUNT)
+#define bfin_write_DMA20_Y_COUNT(val)		bfin_write32(DMA20_Y_COUNT, val)
+#define bfin_read_DMA20_Y_MODIFY()		bfin_read32(DMA20_Y_MODIFY)
+#define bfin_write_DMA20_Y_MODIFY(val) 		bfin_write32(DMA20_Y_MODIFY, val)
+#define bfin_read_DMA20_CURR_DESC_PTR() 	bfin_read32(DMA20_CURR_DESC_PTR)
+#define bfin_write_DMA20_CURR_DESC_PTR(val) 	bfin_write32(DMA20_CURR_DESC_PTR, val)
+#define bfin_read_DMA20_PREV_DESC_PTR() 	bfin_read32(DMA20_PREV_DESC_PTR)
+#define bfin_write_DMA20_PREV_DESC_PTR(val) 	bfin_write32(DMA20_PREV_DESC_PTR, val)
+#define bfin_read_DMA20_CURR_ADDR() 		bfin_read32(DMA20_CURR_ADDR)
+#define bfin_write_DMA20_CURR_ADDR(val) 	bfin_write32(DMA20_CURR_ADDR, val)
+#define bfin_read_DMA20_IRQ_STATUS()		bfin_read32(DMA20_IRQ_STATUS)
+#define bfin_write_DMA20_IRQ_STATUS(val)	bfin_write32(DMA20_IRQ_STATUS, val)
+#define bfin_read_DMA20_CURR_X_COUNT()		bfin_read32(DMA20_CURR_X_COUNT)
+#define bfin_write_DMA20_CURR_X_COUNT(val)	bfin_write32(DMA20_CURR_X_COUNT, val)
+#define bfin_read_DMA20_CURR_Y_COUNT()		bfin_read32(DMA20_CURR_Y_COUNT)
+#define bfin_write_DMA20_CURR_Y_COUNT(val)	bfin_write32(DMA20_CURR_Y_COUNT, val)
+#define bfin_read_DMA20_BWL_COUNT()		bfin_read32(DMA20_BWL_COUNT)
+#define bfin_write_DMA20_BWL_COUNT(val)		bfin_write32(DMA20_BWL_COUNT, val)
+#define bfin_read_DMA20_CURR_BWL_COUNT()	bfin_read32(DMA20_CURR_BWL_COUNT)
+#define bfin_write_DMA20_CURR_BWL_COUNT(val)	bfin_write32(DMA20_CURR_BWL_COUNT, val)
+#define bfin_read_DMA20_BWM_COUNT()		bfin_read32(DMA20_BWM_COUNT)
+#define bfin_write_DMA20_BWM_COUNT(val)		bfin_write32(DMA20_BWM_COUNT, val)
+#define bfin_read_DMA20_CURR_BWM_COUNT()	bfin_read32(DMA20_CURR_BWM_COUNT)
+#define bfin_write_DMA20_CURR_BWM_COUNT(val)	bfin_write32(DMA20_CURR_BWM_COUNT, val)
+
+
+/* MDMA Stream 0 Registers (DMA Channel 21 and 22) */
+
+#define bfin_read_MDMA0_DEST_CRC0_NEXT_DESC_PTR() 	bfin_read32(MDMA0_DEST_CRC0_NEXT_DESC_PTR)
+#define bfin_write_MDMA0_DEST_CRC0_NEXT_DESC_PTR(val) 	bfin_write32(MDMA0_DEST_CRC0_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA0_DEST_CRC0_START_ADDR() 		bfin_read32(MDMA0_DEST_CRC0_START_ADDR)
+#define bfin_write_MDMA0_DEST_CRC0_START_ADDR(val) 	bfin_write32(MDMA0_DEST_CRC0_START_ADDR, val)
+#define bfin_read_MDMA0_DEST_CRC0_CONFIG()		bfin_read32(MDMA0_DEST_CRC0_CONFIG)
+#define bfin_write_MDMA0_DEST_CRC0_CONFIG(val)		bfin_write32(MDMA0_DEST_CRC0_CONFIG, val)
+#define bfin_read_MDMA0_DEST_CRC0_X_COUNT()		bfin_read32(MDMA0_DEST_CRC0_X_COUNT)
+#define bfin_write_MDMA0_DEST_CRC0_X_COUNT(val)		bfin_write32(MDMA0_DEST_CRC0_X_COUNT, val)
+#define bfin_read_MDMA0_DEST_CRC0_X_MODIFY()		bfin_read32(MDMA0_DEST_CRC0_X_MODIFY)
+#define bfin_write_MDMA0_DEST_CRC0_X_MODIFY(val) 	bfin_write32(MDMA0_DEST_CRC0_X_MODIFY, val)
+#define bfin_read_MDMA0_DEST_CRC0_Y_COUNT()		bfin_read32(MDMA0_DEST_CRC0_Y_COUNT)
+#define bfin_write_MDMA0_DEST_CRC0_Y_COUNT(val)		bfin_write32(MDMA0_DEST_CRC0_Y_COUNT, val)
+#define bfin_read_MDMA0_DEST_CRC0_Y_MODIFY()		bfin_read32(MDMA0_DEST_CRC0_Y_MODIFY)
+#define bfin_write_MDMA0_DEST_CRC0_Y_MODIFY(val) 	bfin_write32(MDMA0_DEST_CRC0_Y_MODIFY, val)
+#define bfin_read_MDMA0_DEST_CRC0_CURR_DESC_PTR() 	bfin_read32(MDMA0_DEST_CRC0_CURR_DESC_PTR)
+#define bfin_write_MDMA0_DEST_CRC0_CURR_DESC_PTR(val) 	bfin_write32(MDMA0_DEST_CRC0_CURR_DESC_PTR, val)
+#define bfin_read_MDMA0_DEST_CRC0_PREV_DESC_PTR() 	bfin_read32(MDMA0_DEST_CRC0_PREV_DESC_PTR)
+#define bfin_write_MDMA0_DEST_CRC0_PREV_DESC_PTR(val) 	bfin_write32(MDMA0_DEST_CRC0_PREV_DESC_PTR, val)
+#define bfin_read_MDMA0_DEST_CRC0_CURR_ADDR() 		bfin_read32(MDMA0_DEST_CRC0_CURR_ADDR)
+#define bfin_write_MDMA0_DEST_CRC0_CURR_ADDR(val) 	bfin_write32(MDMA0_DEST_CRC0_CURR_ADDR, val)
+#define bfin_read_MDMA0_DEST_CRC0_IRQ_STATUS()		bfin_read32(MDMA0_DEST_CRC0_IRQ_STATUS)
+#define bfin_write_MDMA0_DEST_CRC0_IRQ_STATUS(val)	bfin_write32(MDMA0_DEST_CRC0_IRQ_STATUS, val)
+#define bfin_read_MDMA0_DEST_CRC0_CURR_X_COUNT()	bfin_read32(MDMA0_DEST_CRC0_CURR_X_COUNT)
+#define bfin_write_MDMA0_DEST_CRC0_CURR_X_COUNT(val)	bfin_write32(MDMA0_DEST_CRC0_CURR_X_COUNT, val)
+#define bfin_read_MDMA0_DEST_CRC0_CURR_Y_COUNT()	bfin_read32(MDMA0_DEST_CRC0_CURR_Y_COUNT)
+#define bfin_write_MDMA0_DEST_CRC0_CURR_Y_COUNT(val)	bfin_write32(MDMA0_DEST_CRC0_CURR_Y_COUNT, val)
+#define bfin_read_MDMA0_SRC_CRC0_NEXT_DESC_PTR() 	bfin_read32(MDMA0_SRC_CRC0_NEXT_DESC_PTR)
+#define bfin_write_MDMA0_SRC_CRC0_NEXT_DESC_PTR(val) 	bfin_write32(MDMA0_SRC_CRC0_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA0_SRC_CRC0_START_ADDR() 		bfin_read32(MDMA0_SRC_CRC0_START_ADDR)
+#define bfin_write_MDMA0_SRC_CRC0_START_ADDR(val) 	bfin_write32(MDMA0_SRC_CRC0_START_ADDR, val)
+#define bfin_read_MDMA0_SRC_CRC0_CONFIG()		bfin_read32(MDMA0_SRC_CRC0_CONFIG)
+#define bfin_write_MDMA0_SRC_CRC0_CONFIG(val)		bfin_write32(MDMA0_SRC_CRC0_CONFIG, val)
+#define bfin_read_MDMA0_SRC_CRC0_X_COUNT()		bfin_read32(MDMA0_SRC_CRC0_X_COUNT)
+#define bfin_write_MDMA0_SRC_CRC0_X_COUNT(val)		bfin_write32(MDMA0_SRC_CRC0_X_COUNT, val)
+#define bfin_read_MDMA0_SRC_CRC0_X_MODIFY()		bfin_read32(MDMA0_SRC_CRC0_X_MODIFY)
+#define bfin_write_MDMA0_SRC_CRC0_X_MODIFY(val) 	bfin_write32(MDMA0_SRC_CRC0_X_MODIFY, val)
+#define bfin_read_MDMA0_SRC_CRC0_Y_COUNT()		bfin_read32(MDMA0_SRC_CRC0_Y_COUNT)
+#define bfin_write_MDMA0_SRC_CRC0_Y_COUNT(val)		bfin_write32(MDMA0_SRC_CRC0_Y_COUNT, val)
+#define bfin_read_MDMA0_SRC_CRC0_Y_MODIFY()		bfin_read32(MDMA0_SRC_CRC0_Y_MODIFY)
+#define bfin_write_MDMA0_SRC_CRC0_Y_MODIFY(val) 	bfin_write32(MDMA0_SRC_CRC0_Y_MODIFY, val)
+#define bfin_read_MDMA0_SRC_CRC0_CURR_DESC_PTR() 	bfin_read32(MDMA0_SRC_CRC0_CURR_DESC_PTR)
+#define bfin_write_MDMA0_SRC_CRC0_CURR_DESC_PTR(val) 	bfin_write32(MDMA0_SRC_CRC0_CURR_DESC_PTR, val)
+#define bfin_read_MDMA0_SRC_CRC0_PREV_DESC_PTR() 	bfin_read32(MDMA0_SRC_CRC0_PREV_DESC_PTR)
+#define bfin_write_MDMA0_SRC_CRC0_PREV_DESC_PTR(val) 	bfin_write32(MDMA0_SRC_CRC0_PREV_DESC_PTR, val)
+#define bfin_read_MDMA0_SRC_CRC0_CURR_ADDR() 		bfin_read32(MDMA0_SRC_CRC0_CURR_ADDR)
+#define bfin_write_MDMA0_SRC_CRC0_CURR_ADDR(val) 	bfin_write32(MDMA0_SRC_CRC0_CURR_ADDR, val)
+#define bfin_read_MDMA0_SRC_CRC0_IRQ_STATUS()		bfin_read32(MDMA0_SRC_CRC0_IRQ_STATUS)
+#define bfin_write_MDMA0_SRC_CRC0_IRQ_STATUS(val)	bfin_write32(MDMA0_SRC_CRC0_IRQ_STATUS, val)
+#define bfin_read_MDMA0_SRC_CRC0_CURR_X_COUNT()		bfin_read32(MDMA0_SRC_CRC0_CURR_X_COUNT)
+#define bfin_write_MDMA0_SRC_CRC0_CURR_X_COUNT(val)	bfin_write32(MDMA0_SRC_CRC0_CURR_X_COUNT, val)
+#define bfin_read_MDMA0_SRC_CRC0_CURR_Y_COUNT()		bfin_read32(MDMA0_SRC_CRC0_CURR_Y_COUNT)
+#define bfin_write_MDMA0_SRC_CRC0_CURR_Y_COUNT(val)	bfin_write32(MDMA0_SRC_CRC0_CURR_Y_COUNT, val)
+
+/* MDMA Stream 1 Registers (DMA Channel 23 and 24) */
+
+#define bfin_read_MDMA1_DEST_CRC1_NEXT_DESC_PTR() 	bfin_read32(MDMA1_DEST_CRC1_NEXT_DESC_PTR)
+#define bfin_write_MDMA1_DEST_CRC1_NEXT_DESC_PTR(val) 	bfin_write32(MDMA1_DEST_CRC1_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA1_DEST_CRC1_START_ADDR() 		bfin_read32(MDMA1_DEST_CRC1_START_ADDR)
+#define bfin_write_MDMA1_DEST_CRC1_START_ADDR(val) 	bfin_write32(MDMA1_DEST_CRC1_START_ADDR, val)
+#define bfin_read_MDMA1_DEST_CRC1_CONFIG()		bfin_read32(MDMA1_DEST_CRC1_CONFIG)
+#define bfin_write_MDMA1_DEST_CRC1_CONFIG(val)		bfin_write32(MDMA1_DEST_CRC1_CONFIG, val)
+#define bfin_read_MDMA1_DEST_CRC1_X_COUNT()		bfin_read32(MDMA1_DEST_CRC1_X_COUNT)
+#define bfin_write_MDMA1_DEST_CRC1_X_COUNT(val)		bfin_write32(MDMA1_DEST_CRC1_X_COUNT, val)
+#define bfin_read_MDMA1_DEST_CRC1_X_MODIFY()		bfin_read32(MDMA1_DEST_CRC1_X_MODIFY)
+#define bfin_write_MDMA1_DEST_CRC1_X_MODIFY(val) 	bfin_write32(MDMA1_DEST_CRC1_X_MODIFY, val)
+#define bfin_read_MDMA1_DEST_CRC1_Y_COUNT()		bfin_read32(MDMA1_DEST_CRC1_Y_COUNT)
+#define bfin_write_MDMA1_DEST_CRC1_Y_COUNT(val)		bfin_write32(MDMA1_DEST_CRC1_Y_COUNT, val)
+#define bfin_read_MDMA1_DEST_CRC1_Y_MODIFY()		bfin_read32(MDMA1_DEST_CRC1_Y_MODIFY)
+#define bfin_write_MDMA1_DEST_CRC1_Y_MODIFY(val) 	bfin_write32(MDMA1_DEST_CRC1_Y_MODIFY, val)
+#define bfin_read_MDMA1_DEST_CRC1_CURR_DESC_PTR() 	bfin_read32(MDMA1_DEST_CRC1_CURR_DESC_PTR)
+#define bfin_write_MDMA1_DEST_CRC1_CURR_DESC_PTR(val) 	bfin_write32(MDMA1_DEST_CRC1_CURR_DESC_PTR, val)
+#define bfin_read_MDMA1_DEST_CRC1_PREV_DESC_PTR() 	bfin_read32(MDMA1_DEST_CRC1_PREV_DESC_PTR)
+#define bfin_write_MDMA1_DEST_CRC1_PREV_DESC_PTR(val) 	bfin_write32(MDMA1_DEST_CRC1_PREV_DESC_PTR, val)
+#define bfin_read_MDMA1_DEST_CRC1_CURR_ADDR() 		bfin_read32(MDMA1_DEST_CRC1_CURR_ADDR)
+#define bfin_write_MDMA1_DEST_CRC1_CURR_ADDR(val) 	bfin_write32(MDMA1_DEST_CRC1_CURR_ADDR, val)
+#define bfin_read_MDMA1_DEST_CRC1_IRQ_STATUS()		bfin_read32(MDMA1_DEST_CRC1_IRQ_STATUS)
+#define bfin_write_MDMA1_DEST_CRC1_IRQ_STATUS(val)	bfin_write32(MDMA1_DEST_CRC1_IRQ_STATUS, val)
+#define bfin_read_MDMA1_DEST_CRC1_CURR_X_COUNT()	bfin_read32(MDMA1_DEST_CRC1_CURR_X_COUNT)
+#define bfin_write_MDMA1_DEST_CRC1_CURR_X_COUNT(val)	bfin_write32(MDMA1_DEST_CRC1_CURR_X_COUNT, val)
+#define bfin_read_MDMA1_DEST_CRC1_CURR_Y_COUNT()	bfin_read32(MDMA1_DEST_CRC1_CURR_Y_COUNT)
+#define bfin_write_MDMA1_DEST_CRC1_CURR_Y_COUNT(val)	bfin_write32(MDMA1_DEST_CRC1_CURR_Y_COUNT, val)
+#define bfin_read_MDMA1_SRC_CRC1_NEXT_DESC_PTR() 	bfin_read32(MDMA1_SRC_CRC1_NEXT_DESC_PTR)
+#define bfin_write_MDMA1_SRC_CRC1_NEXT_DESC_PTR(val) 	bfin_write32(MDMA1_SRC_CRC1_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA1_SRC_CRC1_START_ADDR() 		bfin_read32(MDMA1_SRC_CRC1_START_ADDR)
+#define bfin_write_MDMA1_SRC_CRC1_START_ADDR(val) 	bfin_write32(MDMA1_SRC_CRC1_START_ADDR, val)
+#define bfin_read_MDMA1_SRC_CRC1_CONFIG()		bfin_read32(MDMA1_SRC_CRC1_CONFIG)
+#define bfin_write_MDMA1_SRC_CRC1_CONFIG(val)		bfin_write32(MDMA1_SRC_CRC1_CONFIG, val)
+#define bfin_read_MDMA1_SRC_CRC1_X_COUNT()		bfin_read32(MDMA1_SRC_CRC1_X_COUNT)
+#define bfin_write_MDMA1_SRC_CRC1_X_COUNT(val)		bfin_write32(MDMA1_SRC_CRC1_X_COUNT, val)
+#define bfin_read_MDMA1_SRC_CRC1_X_MODIFY()		bfin_read32(MDMA1_SRC_CRC1_X_MODIFY)
+#define bfin_write_MDMA1_SRC_CRC1_X_MODIFY(val) 	bfin_write32(MDMA1_SRC_CRC1_X_MODIFY, val)
+#define bfin_read_MDMA1_SRC_CRC1_Y_COUNT()		bfin_read32(MDMA1_SRC_CRC1_Y_COUNT)
+#define bfin_write_MDMA1_SRC_CRC1_Y_COUNT(val)		bfin_write32(MDMA1_SRC_CRC1_Y_COUNT, val)
+#define bfin_read_MDMA1_SRC_CRC1_Y_MODIFY()		bfin_read32(MDMA1_SRC_CRC1_Y_MODIFY)
+#define bfin_write_MDMA1_SRC_CRC1_Y_MODIFY(val) 	bfin_write32(MDMA1_SRC_CRC1_Y_MODIFY, val)
+#define bfin_read_MDMA1_SRC_CRC1_CURR_DESC_PTR() 	bfin_read32(MDMA1_SRC_CRC1_CURR_DESC_PTR)
+#define bfin_write_MDMA1_SRC_CRC1_CURR_DESC_PTR(val) 	bfin_write32(MDMA1_SRC_CRC1_CURR_DESC_PTR, val)
+#define bfin_read_MDMA1_SRC_CRC1_PREV_DESC_PTR() 	bfin_read32(MDMA1_SRC_CRC1_PREV_DESC_PTR)
+#define bfin_write_MDMA1_SRC_CRC1_PREV_DESC_PTR(val) 	bfin_write32(MDMA1_SRC_CRC1_PREV_DESC_PTR, val)
+#define bfin_read_MDMA1_SRC_CRC1_CURR_ADDR() 		bfin_read32(MDMA1_SRC_CRC1_CURR_ADDR)
+#define bfin_write_MDMA1_SRC_CRC1_CURR_ADDR(val) 	bfin_write32(MDMA1_SRC_CRC1_CURR_ADDR, val)
+#define bfin_read_MDMA1_SRC_CRC1_IRQ_STATUS()		bfin_read32(MDMA1_SRC_CRC1_IRQ_STATUS)
+#define bfin_write_MDMA1_SRC_CRC1_IRQ_STATUS(val)	bfin_write32(MDMA1_SRC_CRC1_IRQ_STATUS, val)
+#define bfin_read_MDMA1_SRC_CRC1_CURR_X_COUNT()		bfin_read32(MDMA1_SRC_CRC1_CURR_X_COUNT)
+#define bfin_write_MDMA1_SRC_CRC1_CURR_X_COUNT(val)	bfin_write32(MDMA1_SRC_CRC1_CURR_X_COUNT, val)
+#define bfin_read_MDMA1_SRC_CRC1_CURR_Y_COUNT()		bfin_read32(MDMA1_SRC_CRC1_CURR_Y_COUNT)
+#define bfin_write_MDMA1_SRC_CRC1_CURR_Y_COUNT(val)	bfin_write32(MDMA1_SRC_CRC1_CURR_Y_COUNT, val)
+
+
+/* MDMA Stream 2 Registers (DMA Channel 25 and 26) */
+
+#define bfin_read_MDMA2_DEST_NEXT_DESC_PTR() 		bfin_read32(MDMA2_DEST_NEXT_DESC_PTR)
+#define bfin_write_MDMA2_DEST_NEXT_DESC_PTR(val) 	bfin_write32(MDMA2_DEST_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA2_DEST_START_ADDR() 		bfin_read32(MDMA2_DEST_START_ADDR)
+#define bfin_write_MDMA2_DEST_START_ADDR(val) 		bfin_write32(MDMA2_DEST_START_ADDR, val)
+#define bfin_read_MDMA2_DEST_CONFIG()			bfin_read32(MDMA2_DEST_CONFIG)
+#define bfin_write_MDMA2_DEST_CONFIG(val)		bfin_write32(MDMA2_DEST_CONFIG, val)
+#define bfin_read_MDMA2_DEST_X_COUNT()			bfin_read32(MDMA2_DEST_X_COUNT)
+#define bfin_write_MDMA2_DEST_X_COUNT(val)		bfin_write32(MDMA2_DEST_X_COUNT, val)
+#define bfin_read_MDMA2_DEST_X_MODIFY()			bfin_read32(MDMA2_DEST_X_MODIFY)
+#define bfin_write_MDMA2_DEST_X_MODIFY(val) 		bfin_write32(MDMA2_DEST_X_MODIFY, val)
+#define bfin_read_MDMA2_DEST_Y_COUNT()			bfin_read32(MDMA2_DEST_Y_COUNT)
+#define bfin_write_MDMA2_DEST_Y_COUNT(val)		bfin_write32(MDMA2_DEST_Y_COUNT, val)
+#define bfin_read_MDMA2_DEST_Y_MODIFY()			bfin_read32(MDMA2_DEST_Y_MODIFY)
+#define bfin_write_MDMA2_DEST_Y_MODIFY(val) 		bfin_write32(MDMA2_DEST_Y_MODIFY, val)
+#define bfin_read_MDMA2_DEST_CURR_DESC_PTR() 		bfin_read32(MDMA2_DEST_CURR_DESC_PTR)
+#define bfin_write_MDMA2_DEST_CURR_DESC_PTR(val) 	bfin_write32(MDMA2_DEST_CURR_DESC_PTR, val)
+#define bfin_read_MDMA2_DEST_PREV_DESC_PTR() 		bfin_read32(MDMA2_DEST_PREV_DESC_PTR)
+#define bfin_write_MDMA2_DEST_PREV_DESC_PTR(val) 	bfin_write32(MDMA2_DEST_PREV_DESC_PTR, val)
+#define bfin_read_MDMA2_DEST_CURR_ADDR() 		bfin_read32(MDMA2_DEST_CURR_ADDR)
+#define bfin_write_MDMA2_DEST_CURR_ADDR(val) 		bfin_write32(MDMA2_DEST_CURR_ADDR, val)
+#define bfin_read_MDMA2_DEST_IRQ_STATUS()		bfin_read32(MDMA2_DEST_IRQ_STATUS)
+#define bfin_write_MDMA2_DEST_IRQ_STATUS(val)		bfin_write32(MDMA2_DEST_IRQ_STATUS, val)
+#define bfin_read_MDMA2_DEST_CURR_X_COUNT()		bfin_read32(MDMA2_DEST_CURR_X_COUNT)
+#define bfin_write_MDMA2_DEST_CURR_X_COUNT(val)		bfin_write32(MDMA2_DEST_CURR_X_COUNT, val)
+#define bfin_read_MDMA2_DEST_CURR_Y_COUNT()		bfin_read32(MDMA2_DEST_CURR_Y_COUNT)
+#define bfin_write_MDMA2_DEST_CURR_Y_COUNT(val)		bfin_write32(MDMA2_DEST_CURR_Y_COUNT, val)
+#define bfin_read_MDMA2_SRC_NEXT_DESC_PTR() 		bfin_read32(MDMA2_SRC_NEXT_DESC_PTR)
+#define bfin_write_MDMA2_SRC_NEXT_DESC_PTR(val) 	bfin_write32(MDMA2_SRC_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA2_SRC_START_ADDR() 		bfin_read32(MDMA2_SRC_START_ADDR)
+#define bfin_write_MDMA2_SRC_START_ADDR(val) 		bfin_write32(MDMA2_SRC_START_ADDR, val)
+#define bfin_read_MDMA2_SRC_CONFIG()			bfin_read32(MDMA2_SRC_CONFIG)
+#define bfin_write_MDMA2_SRC_CONFIG(val)		bfin_write32(MDMA2_SRC_CONFIG, val)
+#define bfin_read_MDMA2_SRC_X_COUNT()			bfin_read32(MDMA2_SRC_X_COUNT)
+#define bfin_write_MDMA2_SRC_X_COUNT(val)		bfin_write32(MDMA2_SRC_X_COUNT, val)
+#define bfin_read_MDMA2_SRC_X_MODIFY()			bfin_read32(MDMA2_SRC_X_MODIFY)
+#define bfin_write_MDMA2_SRC_X_MODIFY(val) 		bfin_write32(MDMA2_SRC_X_MODIFY, val)
+#define bfin_read_MDMA2_SRC_Y_COUNT()			bfin_read32(MDMA2_SRC_Y_COUNT)
+#define bfin_write_MDMA2_SRC_Y_COUNT(val)		bfin_write32(MDMA2_SRC_Y_COUNT, val)
+#define bfin_read_MDMA2_SRC_Y_MODIFY()			bfin_read32(MDMA2_SRC_Y_MODIFY)
+#define bfin_write_MDMA2_SRC_Y_MODIFY(val) 		bfin_write32(MDMA2_SRC_Y_MODIFY, val)
+#define bfin_read_MDMA2_SRC_CURR_DESC_PTR() 		bfin_read32(MDMA2_SRC_CURR_DESC_PTR)
+#define bfin_write_MDMA2_SRC_CURR_DESC_PTR(val)		bfin_write32(MDMA2_SRC_CURR_DESC_PTR, val)
+#define bfin_read_MDMA2_SRC_PREV_DESC_PTR() 		bfin_read32(MDMA2_SRC_PREV_DESC_PTR)
+#define bfin_write_MDMA2_SRC_PREV_DESC_PTR(val) 	bfin_write32(MDMA2_SRC_PREV_DESC_PTR, val)
+#define bfin_read_MDMA2_SRC_CURR_ADDR() 		bfin_read32(MDMA2_SRC_CURR_ADDR)
+#define bfin_write_MDMA2_SRC_CURR_ADDR(val) 		bfin_write32(MDMA2_SRC_CURR_ADDR, val)
+#define bfin_read_MDMA2_SRC_IRQ_STATUS()		bfin_read32(MDMA2_SRC_IRQ_STATUS)
+#define bfin_write_MDMA2_SRC_IRQ_STATUS(val)		bfin_write32(MDMA2_SRC_IRQ_STATUS, val)
+#define bfin_read_MDMA2_SRC_CURR_X_COUNT()		bfin_read32(MDMA2_SRC_CURR_X_COUNT)
+#define bfin_write_MDMA2_SRC_CURR_X_COUNT(val)		bfin_write32(MDMA2_SRC_CURR_X_COUNT, val)
+#define bfin_read_MDMA2_SRC_CURR_Y_COUNT()		bfin_read32(MDMA2_SRC_CURR_Y_COUNT)
+#define bfin_write_MDMA2_SRC_CURR_Y_COUNT(val)		bfin_write32(MDMA2_SRC_CURR_Y_COUNT, val)
+
+/* MDMA Stream 3 Registers (DMA Channel 27 and 28) */
+
+#define bfin_read_MDMA3_DEST_NEXT_DESC_PTR() 		bfin_read32(MDMA3_DEST_NEXT_DESC_PTR)
+#define bfin_write_MDMA3_DEST_NEXT_DESC_PTR(val) 	bfin_write32(MDMA3_DEST_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA3_DEST_START_ADDR() 		bfin_read32(MDMA3_DEST_START_ADDR)
+#define bfin_write_MDMA3_DEST_START_ADDR(val) 		bfin_write32(MDMA3_DEST_START_ADDR, val)
+#define bfin_read_MDMA3_DEST_CONFIG()			bfin_read32(MDMA3_DEST_CONFIG)
+#define bfin_write_MDMA3_DEST_CONFIG(val)		bfin_write32(MDMA3_DEST_CONFIG, val)
+#define bfin_read_MDMA3_DEST_X_COUNT()			bfin_read32(MDMA3_DEST_X_COUNT)
+#define bfin_write_MDMA3_DEST_X_COUNT(val)		bfin_write32(MDMA3_DEST_X_COUNT, val)
+#define bfin_read_MDMA3_DEST_X_MODIFY()			bfin_read32(MDMA3_DEST_X_MODIFY)
+#define bfin_write_MDMA3_DEST_X_MODIFY(val) 		bfin_write32(MDMA3_DEST_X_MODIFY, val)
+#define bfin_read_MDMA3_DEST_Y_COUNT()			bfin_read32(MDMA3_DEST_Y_COUNT)
+#define bfin_write_MDMA3_DEST_Y_COUNT(val)		bfin_write32(MDMA3_DEST_Y_COUNT, val)
+#define bfin_read_MDMA3_DEST_Y_MODIFY()			bfin_read32(MDMA3_DEST_Y_MODIFY)
+#define bfin_write_MDMA3_DEST_Y_MODIFY(val) 		bfin_write32(MDMA3_DEST_Y_MODIFY, val)
+#define bfin_read_MDMA3_DEST_CURR_DESC_PTR() 		bfin_read32(MDMA3_DEST_CURR_DESC_PTR)
+#define bfin_write_MDMA3_DEST_CURR_DESC_PTR(val) 	bfin_write32(MDMA3_DEST_CURR_DESC_PTR, val)
+#define bfin_read_MDMA3_DEST_PREV_DESC_PTR()	 	bfin_read32(MDMA3_DEST_PREV_DESC_PTR)
+#define bfin_write_MDMA3_DEST_PREV_DESC_PTR(val) 	bfin_write32(MDMA3_DEST_PREV_DESC_PTR, val)
+#define bfin_read_MDMA3_DEST_CURR_ADDR() 		bfin_read32(MDMA3_DEST_CURR_ADDR)
+#define bfin_write_MDMA3_DEST_CURR_ADDR(val) 		bfin_write32(MDMA3_DEST_CURR_ADDR, val)
+#define bfin_read_MDMA3_DEST_IRQ_STATUS()		bfin_read32(MDMA3_DEST_IRQ_STATUS)
+#define bfin_write_MDMA3_DEST_IRQ_STATUS(val)		bfin_write32(MDMA3_DEST_IRQ_STATUS, val)
+#define bfin_read_MDMA3_DEST_CURR_X_COUNT()		bfin_read32(MDMA3_DEST_CURR_X_COUNT)
+#define bfin_write_MDMA3_DEST_CURR_X_COUNT(val)		bfin_write32(MDMA3_DEST_CURR_X_COUNT, val)
+#define bfin_read_MDMA3_DEST_CURR_Y_COUNT()		bfin_read32(MDMA3_DEST_CURR_Y_COUNT)
+#define bfin_write_MDMA3_DEST_CURR_Y_COUNT(val)		bfin_write32(MDMA3_DEST_CURR_Y_COUNT, val)
+#define bfin_read_MDMA3_SRC_NEXT_DESC_PTR() 		bfin_read32(MDMA3_SRC_NEXT_DESC_PTR)
+#define bfin_write_MDMA3_SRC_NEXT_DESC_PTR(val) 	bfin_write32(MDMA3_SRC_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA3_SRC_START_ADDR() 		bfin_read32(MDMA3_SRC_START_ADDR)
+#define bfin_write_MDMA3_SRC_START_ADDR(val) 		bfin_write32(MDMA3_SRC_START_ADDR, val)
+#define bfin_read_MDMA3_SRC_CONFIG()			bfin_read32(MDMA3_SRC_CONFIG)
+#define bfin_write_MDMA3_SRC_CONFIG(val)		bfin_write32(MDMA3_SRC_CONFIG, val)
+#define bfin_read_MDMA3_SRC_X_COUNT()			bfin_read32(MDMA3_SRC_X_COUNT)
+#define bfin_write_MDMA3_SRC_X_COUNT(val)		bfin_write32(MDMA3_SRC_X_COUNT, val)
+#define bfin_read_MDMA3_SRC_X_MODIFY()			bfin_read32(MDMA3_SRC_X_MODIFY)
+#define bfin_write_MDMA3_SRC_X_MODIFY(val) 		bfin_write32(MDMA3_SRC_X_MODIFY, val)
+#define bfin_read_MDMA3_SRC_Y_COUNT()			bfin_read32(MDMA3_SRC_Y_COUNT)
+#define bfin_write_MDMA3_SRC_Y_COUNT(val)		bfin_write32(MDMA3_SRC_Y_COUNT, val)
+#define bfin_read_MDMA3_SRC_Y_MODIFY()			bfin_read32(MDMA3_SRC_Y_MODIFY)
+#define bfin_write_MDMA3_SRC_Y_MODIFY(val) 		bfin_write32(MDMA3_SRC_Y_MODIFY, val)
+#define bfin_read_MDMA3_SRC_CURR_DESC_PTR() 		bfin_read32(MDMA3_SRC_CURR_DESC_PTR)
+#define bfin_write_MDMA3_SRC_CURR_DESC_PTR(val) 	bfin_write32(MDMA3_SRC_CURR_DESC_PTR, val)
+#define bfin_read_MDMA3_SRC_PREV_DESC_PTR() 		bfin_read32(MDMA3_SRC_PREV_DESC_PTR)
+#define bfin_write_MDMA3_SRC_PREV_DESC_PTR(val) 	bfin_write32(MDMA3_SRC_PREV_DESC_PTR, val)
+#define bfin_read_MDMA3_SRC_CURR_ADDR() 		bfin_read32(MDMA3_SRC_CURR_ADDR)
+#define bfin_write_MDMA3_SRC_CURR_ADDR(val) 		bfin_write32(MDMA3_SRC_CURR_ADDR, val)
+#define bfin_read_MDMA3_SRC_IRQ_STATUS()		bfin_read32(MDMA3_SRC_IRQ_STATUS)
+#define bfin_write_MDMA3_SRC_IRQ_STATUS(val)		bfin_write32(MDMA3_SRC_IRQ_STATUS, val)
+#define bfin_read_MDMA3_SRC_CURR_X_COUNT()		bfin_read32(MDMA3_SRC_CURR_X_COUNT)
+#define bfin_write_MDMA3_SRC_CURR_X_COUNT(val)		bfin_write32(MDMA3_SRC_CURR_X_COUNT, val)
+#define bfin_read_MDMA3_SRC_CURR_Y_COUNT()		bfin_read32(MDMA3_SRC_CURR_Y_COUNT)
+#define bfin_write_MDMA3_SRC_CURR_Y_COUNT(val)		bfin_write32(MDMA3_SRC_CURR_Y_COUNT, val)
+
+
+/* DMA Channel 29 Registers */
+
+#define bfin_read_DMA29_NEXT_DESC_PTR() 	bfin_read32(DMA29_NEXT_DESC_PTR)
+#define bfin_write_DMA29_NEXT_DESC_PTR(val) 	bfin_write32(DMA29_NEXT_DESC_PTR, val)
+#define bfin_read_DMA29_START_ADDR() 		bfin_read32(DMA29_START_ADDR)
+#define bfin_write_DMA29_START_ADDR(val) 	bfin_write32(DMA29_START_ADDR, val)
+#define bfin_read_DMA29_CONFIG()		bfin_read32(DMA29_CONFIG)
+#define bfin_write_DMA29_CONFIG(val)		bfin_write32(DMA29_CONFIG, val)
+#define bfin_read_DMA29_X_COUNT()		bfin_read32(DMA29_X_COUNT)
+#define bfin_write_DMA29_X_COUNT(val)		bfin_write32(DMA29_X_COUNT, val)
+#define bfin_read_DMA29_X_MODIFY()		bfin_read32(DMA29_X_MODIFY)
+#define bfin_write_DMA29_X_MODIFY(val) 		bfin_write32(DMA29_X_MODIFY, val)
+#define bfin_read_DMA29_Y_COUNT()		bfin_read32(DMA29_Y_COUNT)
+#define bfin_write_DMA29_Y_COUNT(val)		bfin_write32(DMA29_Y_COUNT, val)
+#define bfin_read_DMA29_Y_MODIFY()		bfin_read32(DMA29_Y_MODIFY)
+#define bfin_write_DMA29_Y_MODIFY(val) 		bfin_write32(DMA29_Y_MODIFY, val)
+#define bfin_read_DMA29_CURR_DESC_PTR() 	bfin_read32(DMA29_CURR_DESC_PTR)
+#define bfin_write_DMA29_CURR_DESC_PTR(val) 	bfin_write32(DMA29_CURR_DESC_PTR, val)
+#define bfin_read_DMA29_PREV_DESC_PTR() 	bfin_read32(DMA29_PREV_DESC_PTR)
+#define bfin_write_DMA29_PREV_DESC_PTR(val) 	bfin_write32(DMA29_PREV_DESC_PTR, val)
+#define bfin_read_DMA29_CURR_ADDR() 		bfin_read32(DMA29_CURR_ADDR)
+#define bfin_write_DMA29_CURR_ADDR(val) 	bfin_write32(DMA29_CURR_ADDR, val)
+#define bfin_read_DMA29_IRQ_STATUS()		bfin_read32(DMA29_IRQ_STATUS)
+#define bfin_write_DMA29_IRQ_STATUS(val)	bfin_write32(DMA29_IRQ_STATUS, val)
+#define bfin_read_DMA29_CURR_X_COUNT()		bfin_read32(DMA29_CURR_X_COUNT)
+#define bfin_write_DMA29_CURR_X_COUNT(val)	bfin_write32(DMA29_CURR_X_COUNT, val)
+#define bfin_read_DMA29_CURR_Y_COUNT()		bfin_read32(DMA29_CURR_Y_COUNT)
+#define bfin_write_DMA29_CURR_Y_COUNT(val)	bfin_write32(DMA29_CURR_Y_COUNT, val)
+#define bfin_read_DMA29_BWL_COUNT()		bfin_read32(DMA29_BWL_COUNT)
+#define bfin_write_DMA29_BWL_COUNT(val)		bfin_write32(DMA29_BWL_COUNT, val)
+#define bfin_read_DMA29_CURR_BWL_COUNT()	bfin_read32(DMA29_CURR_BWL_COUNT)
+#define bfin_write_DMA29_CURR_BWL_COUNT(val)	bfin_write32(DMA29_CURR_BWL_COUNT, val)
+#define bfin_read_DMA29_BWM_COUNT()		bfin_read32(DMA29_BWM_COUNT)
+#define bfin_write_DMA29_BWM_COUNT(val)		bfin_write32(DMA29_BWM_COUNT, val)
+#define bfin_read_DMA29_CURR_BWM_COUNT()	bfin_read32(DMA29_CURR_BWM_COUNT)
+#define bfin_write_DMA29_CURR_BWM_COUNT(val)	bfin_write32(DMA29_CURR_BWM_COUNT, val)
+
+/* DMA Channel 30 Registers */
+
+#define bfin_read_DMA30_NEXT_DESC_PTR() 	bfin_read32(DMA30_NEXT_DESC_PTR)
+#define bfin_write_DMA30_NEXT_DESC_PTR(val) 	bfin_write32(DMA30_NEXT_DESC_PTR, val)
+#define bfin_read_DMA30_START_ADDR() 		bfin_read32(DMA30_START_ADDR)
+#define bfin_write_DMA30_START_ADDR(val) 	bfin_write32(DMA30_START_ADDR, val)
+#define bfin_read_DMA30_CONFIG()		bfin_read32(DMA30_CONFIG)
+#define bfin_write_DMA30_CONFIG(val)		bfin_write32(DMA30_CONFIG, val)
+#define bfin_read_DMA30_X_COUNT()		bfin_read32(DMA30_X_COUNT)
+#define bfin_write_DMA30_X_COUNT(val)		bfin_write32(DMA30_X_COUNT, val)
+#define bfin_read_DMA30_X_MODIFY()		bfin_read32(DMA30_X_MODIFY)
+#define bfin_write_DMA30_X_MODIFY(val) 		bfin_write32(DMA30_X_MODIFY, val)
+#define bfin_read_DMA30_Y_COUNT()		bfin_read32(DMA30_Y_COUNT)
+#define bfin_write_DMA30_Y_COUNT(val)		bfin_write32(DMA30_Y_COUNT, val)
+#define bfin_read_DMA30_Y_MODIFY()		bfin_read32(DMA30_Y_MODIFY)
+#define bfin_write_DMA30_Y_MODIFY(val) 		bfin_write32(DMA30_Y_MODIFY, val)
+#define bfin_read_DMA30_CURR_DESC_PTR() 	bfin_read32(DMA30_CURR_DESC_PTR)
+#define bfin_write_DMA30_CURR_DESC_PTR(val) 	bfin_write32(DMA30_CURR_DESC_PTR, val)
+#define bfin_read_DMA30_PREV_DESC_PTR() 	bfin_read32(DMA30_PREV_DESC_PTR)
+#define bfin_write_DMA30_PREV_DESC_PTR(val) 	bfin_write32(DMA30_PREV_DESC_PTR, val)
+#define bfin_read_DMA30_CURR_ADDR() 		bfin_read32(DMA30_CURR_ADDR)
+#define bfin_write_DMA30_CURR_ADDR(val) 	bfin_write32(DMA30_CURR_ADDR, val)
+#define bfin_read_DMA30_IRQ_STATUS()		bfin_read32(DMA30_IRQ_STATUS)
+#define bfin_write_DMA30_IRQ_STATUS(val)	bfin_write32(DMA30_IRQ_STATUS, val)
+#define bfin_read_DMA30_CURR_X_COUNT()		bfin_read32(DMA30_CURR_X_COUNT)
+#define bfin_write_DMA30_CURR_X_COUNT(val)	bfin_write32(DMA30_CURR_X_COUNT, val)
+#define bfin_read_DMA30_CURR_Y_COUNT()		bfin_read32(DMA30_CURR_Y_COUNT)
+#define bfin_write_DMA30_CURR_Y_COUNT(val)	bfin_write32(DMA30_CURR_Y_COUNT, val)
+#define bfin_read_DMA30_BWL_COUNT()		bfin_read32(DMA30_BWL_COUNT)
+#define bfin_write_DMA30_BWL_COUNT(val)		bfin_write32(DMA30_BWL_COUNT, val)
+#define bfin_read_DMA30_CURR_BWL_COUNT()	bfin_read32(DMA30_CURR_BWL_COUNT)
+#define bfin_write_DMA30_CURR_BWL_COUNT(val)	bfin_write32(DMA30_CURR_BWL_COUNT, val)
+#define bfin_read_DMA30_BWM_COUNT()		bfin_read32(DMA30_BWM_COUNT)
+#define bfin_write_DMA30_BWM_COUNT(val)		bfin_write32(DMA30_BWM_COUNT, val)
+#define bfin_read_DMA30_CURR_BWM_COUNT()	bfin_read32(DMA30_CURR_BWM_COUNT)
+#define bfin_write_DMA30_CURR_BWM_COUNT(val)	bfin_write32(DMA30_CURR_BWM_COUNT, val)
+
+/* DMA Channel 31 Registers */
+
+#define bfin_read_DMA31_NEXT_DESC_PTR() 	bfin_read32(DMA31_NEXT_DESC_PTR)
+#define bfin_write_DMA31_NEXT_DESC_PTR(val) 	bfin_write32(DMA31_NEXT_DESC_PTR, val)
+#define bfin_read_DMA31_START_ADDR() 		bfin_read32(DMA31_START_ADDR)
+#define bfin_write_DMA31_START_ADDR(val) 	bfin_write32(DMA31_START_ADDR, val)
+#define bfin_read_DMA31_CONFIG()		bfin_read32(DMA31_CONFIG)
+#define bfin_write_DMA31_CONFIG(val)		bfin_write32(DMA31_CONFIG, val)
+#define bfin_read_DMA31_X_COUNT()		bfin_read32(DMA31_X_COUNT)
+#define bfin_write_DMA31_X_COUNT(val)		bfin_write32(DMA31_X_COUNT, val)
+#define bfin_read_DMA31_X_MODIFY()		bfin_read32(DMA31_X_MODIFY)
+#define bfin_write_DMA31_X_MODIFY(val) 		bfin_write32(DMA31_X_MODIFY, val)
+#define bfin_read_DMA31_Y_COUNT()		bfin_read32(DMA31_Y_COUNT)
+#define bfin_write_DMA31_Y_COUNT(val)		bfin_write32(DMA31_Y_COUNT, val)
+#define bfin_read_DMA31_Y_MODIFY()		bfin_read32(DMA31_Y_MODIFY)
+#define bfin_write_DMA31_Y_MODIFY(val) 		bfin_write32(DMA31_Y_MODIFY, val)
+#define bfin_read_DMA31_CURR_DESC_PTR() 	bfin_read32(DMA31_CURR_DESC_PTR)
+#define bfin_write_DMA31_CURR_DESC_PTR(val) 	bfin_write32(DMA31_CURR_DESC_PTR, val)
+#define bfin_read_DMA31_PREV_DESC_PTR() 	bfin_read32(DMA31_PREV_DESC_PTR)
+#define bfin_write_DMA31_PREV_DESC_PTR(val) 	bfin_write32(DMA31_PREV_DESC_PTR, val)
+#define bfin_read_DMA31_CURR_ADDR() 		bfin_read32(DMA31_CURR_ADDR)
+#define bfin_write_DMA31_CURR_ADDR(val) 	bfin_write32(DMA31_CURR_ADDR, val)
+#define bfin_read_DMA31_IRQ_STATUS()		bfin_read32(DMA31_IRQ_STATUS)
+#define bfin_write_DMA31_IRQ_STATUS(val)	bfin_write32(DMA31_IRQ_STATUS, val)
+#define bfin_read_DMA31_CURR_X_COUNT()		bfin_read32(DMA31_CURR_X_COUNT)
+#define bfin_write_DMA31_CURR_X_COUNT(val)	bfin_write32(DMA31_CURR_X_COUNT, val)
+#define bfin_read_DMA31_CURR_Y_COUNT()		bfin_read32(DMA31_CURR_Y_COUNT)
+#define bfin_write_DMA31_CURR_Y_COUNT(val)	bfin_write32(DMA31_CURR_Y_COUNT, val)
+#define bfin_read_DMA31_BWL_COUNT()		bfin_read32(DMA31_BWL_COUNT)
+#define bfin_write_DMA31_BWL_COUNT(val)		bfin_write32(DMA31_BWL_COUNT, val)
+#define bfin_read_DMA31_CURR_BWL_COUNT()	bfin_read32(DMA31_CURR_BWL_COUNT)
+#define bfin_write_DMA31_CURR_BWL_COUNT(val)	bfin_write32(DMA31_CURR_BWL_COUNT, val)
+#define bfin_read_DMA31_BWM_COUNT()		bfin_read32(DMA31_BWM_COUNT)
+#define bfin_write_DMA31_BWM_COUNT(val)		bfin_write32(DMA31_BWM_COUNT, val)
+#define bfin_read_DMA31_CURR_BWM_COUNT()	bfin_read32(DMA31_CURR_BWM_COUNT)
+#define bfin_write_DMA31_CURR_BWM_COUNT(val)	bfin_write32(DMA31_CURR_BWM_COUNT, val)
+
+/* DMA Channel 32 Registers */
+
+#define bfin_read_DMA32_NEXT_DESC_PTR() 	bfin_read32(DMA32_NEXT_DESC_PTR)
+#define bfin_write_DMA32_NEXT_DESC_PTR(val) 	bfin_write32(DMA32_NEXT_DESC_PTR, val)
+#define bfin_read_DMA32_START_ADDR() 		bfin_read32(DMA32_START_ADDR)
+#define bfin_write_DMA32_START_ADDR(val) 	bfin_write32(DMA32_START_ADDR, val)
+#define bfin_read_DMA32_CONFIG()		bfin_read32(DMA32_CONFIG)
+#define bfin_write_DMA32_CONFIG(val)		bfin_write32(DMA32_CONFIG, val)
+#define bfin_read_DMA32_X_COUNT()		bfin_read32(DMA32_X_COUNT)
+#define bfin_write_DMA32_X_COUNT(val)		bfin_write32(DMA32_X_COUNT, val)
+#define bfin_read_DMA32_X_MODIFY()		bfin_read32(DMA32_X_MODIFY)
+#define bfin_write_DMA32_X_MODIFY(val) 		bfin_write32(DMA32_X_MODIFY, val)
+#define bfin_read_DMA32_Y_COUNT()		bfin_read32(DMA32_Y_COUNT)
+#define bfin_write_DMA32_Y_COUNT(val)		bfin_write32(DMA32_Y_COUNT, val)
+#define bfin_read_DMA32_Y_MODIFY()		bfin_read32(DMA32_Y_MODIFY)
+#define bfin_write_DMA32_Y_MODIFY(val) 		bfin_write32(DMA32_Y_MODIFY, val)
+#define bfin_read_DMA32_CURR_DESC_PTR() 	bfin_read32(DMA32_CURR_DESC_PTR)
+#define bfin_write_DMA32_CURR_DESC_PTR(val) 	bfin_write32(DMA32_CURR_DESC_PTR, val)
+#define bfin_read_DMA32_PREV_DESC_PTR() 	bfin_read32(DMA32_PREV_DESC_PTR)
+#define bfin_write_DMA32_PREV_DESC_PTR(val) 	bfin_write32(DMA32_PREV_DESC_PTR, val)
+#define bfin_read_DMA32_CURR_ADDR() 		bfin_read32(DMA32_CURR_ADDR)
+#define bfin_write_DMA32_CURR_ADDR(val) 	bfin_write32(DMA32_CURR_ADDR, val)
+#define bfin_read_DMA32_IRQ_STATUS()		bfin_read32(DMA32_IRQ_STATUS)
+#define bfin_write_DMA32_IRQ_STATUS(val)	bfin_write32(DMA32_IRQ_STATUS, val)
+#define bfin_read_DMA32_CURR_X_COUNT()		bfin_read32(DMA32_CURR_X_COUNT)
+#define bfin_write_DMA32_CURR_X_COUNT(val)	bfin_write32(DMA32_CURR_X_COUNT, val)
+#define bfin_read_DMA32_CURR_Y_COUNT()		bfin_read32(DMA32_CURR_Y_COUNT)
+#define bfin_write_DMA32_CURR_Y_COUNT(val)	bfin_write32(DMA32_CURR_Y_COUNT, val)
+#define bfin_read_DMA32_BWL_COUNT()		bfin_read32(DMA32_BWL_COUNT)
+#define bfin_write_DMA32_BWL_COUNT(val)		bfin_write32(DMA32_BWL_COUNT, val)
+#define bfin_read_DMA32_CURR_BWL_COUNT()	bfin_read32(DMA32_CURR_BWL_COUNT)
+#define bfin_write_DMA32_CURR_BWL_COUNT(val)	bfin_write32(DMA32_CURR_BWL_COUNT, val)
+#define bfin_read_DMA32_BWM_COUNT()		bfin_read32(DMA32_BWM_COUNT)
+#define bfin_write_DMA32_BWM_COUNT(val)		bfin_write32(DMA32_BWM_COUNT, val)
+#define bfin_read_DMA32_CURR_BWM_COUNT()	bfin_read32(DMA32_CURR_BWM_COUNT)
+#define bfin_write_DMA32_CURR_BWM_COUNT(val)	bfin_write32(DMA32_CURR_BWM_COUNT, val)
+
+/* DMA Channel 33 Registers */
+
+#define bfin_read_DMA33_NEXT_DESC_PTR() 	bfin_read32(DMA33_NEXT_DESC_PTR)
+#define bfin_write_DMA33_NEXT_DESC_PTR(val) 	bfin_write32(DMA33_NEXT_DESC_PTR, val)
+#define bfin_read_DMA33_START_ADDR() 		bfin_read32(DMA33_START_ADDR)
+#define bfin_write_DMA33_START_ADDR(val) 	bfin_write32(DMA33_START_ADDR, val)
+#define bfin_read_DMA33_CONFIG()		bfin_read32(DMA33_CONFIG)
+#define bfin_write_DMA33_CONFIG(val)		bfin_write32(DMA33_CONFIG, val)
+#define bfin_read_DMA33_X_COUNT()		bfin_read32(DMA33_X_COUNT)
+#define bfin_write_DMA33_X_COUNT(val)		bfin_write32(DMA33_X_COUNT, val)
+#define bfin_read_DMA33_X_MODIFY()		bfin_read32(DMA33_X_MODIFY)
+#define bfin_write_DMA33_X_MODIFY(val) 		bfin_write32(DMA33_X_MODIFY, val)
+#define bfin_read_DMA33_Y_COUNT()		bfin_read32(DMA33_Y_COUNT)
+#define bfin_write_DMA33_Y_COUNT(val)		bfin_write32(DMA33_Y_COUNT, val)
+#define bfin_read_DMA33_Y_MODIFY()		bfin_read32(DMA33_Y_MODIFY)
+#define bfin_write_DMA33_Y_MODIFY(val) 		bfin_write32(DMA33_Y_MODIFY, val)
+#define bfin_read_DMA33_CURR_DESC_PTR() 	bfin_read32(DMA33_CURR_DESC_PTR)
+#define bfin_write_DMA33_CURR_DESC_PTR(val) 	bfin_write32(DMA33_CURR_DESC_PTR, val)
+#define bfin_read_DMA33_PREV_DESC_PTR() 	bfin_read32(DMA33_PREV_DESC_PTR)
+#define bfin_write_DMA33_PREV_DESC_PTR(val) 	bfin_write32(DMA33_PREV_DESC_PTR, val)
+#define bfin_read_DMA33_CURR_ADDR() 		bfin_read32(DMA33_CURR_ADDR)
+#define bfin_write_DMA33_CURR_ADDR(val) 	bfin_write32(DMA33_CURR_ADDR, val)
+#define bfin_read_DMA33_IRQ_STATUS()		bfin_read32(DMA33_IRQ_STATUS)
+#define bfin_write_DMA33_IRQ_STATUS(val)	bfin_write32(DMA33_IRQ_STATUS, val)
+#define bfin_read_DMA33_CURR_X_COUNT()		bfin_read32(DMA33_CURR_X_COUNT)
+#define bfin_write_DMA33_CURR_X_COUNT(val)	bfin_write32(DMA33_CURR_X_COUNT, val)
+#define bfin_read_DMA33_CURR_Y_COUNT()		bfin_read32(DMA33_CURR_Y_COUNT)
+#define bfin_write_DMA33_CURR_Y_COUNT(val)	bfin_write32(DMA33_CURR_Y_COUNT, val)
+#define bfin_read_DMA33_BWL_COUNT()		bfin_read32(DMA33_BWL_COUNT)
+#define bfin_write_DMA33_BWL_COUNT(val)		bfin_write32(DMA33_BWL_COUNT, val)
+#define bfin_read_DMA33_CURR_BWL_COUNT()	bfin_read32(DMA33_CURR_BWL_COUNT)
+#define bfin_write_DMA33_CURR_BWL_COUNT(val)	bfin_write32(DMA33_CURR_BWL_COUNT, val)
+#define bfin_read_DMA33_BWM_COUNT()		bfin_read32(DMA33_BWM_COUNT)
+#define bfin_write_DMA33_BWM_COUNT(val)		bfin_write32(DMA33_BWM_COUNT, val)
+#define bfin_read_DMA33_CURR_BWM_COUNT()	bfin_read32(DMA33_CURR_BWM_COUNT)
+#define bfin_write_DMA33_CURR_BWM_COUNT(val)	bfin_write32(DMA33_CURR_BWM_COUNT, val)
+
+/* DMA Channel 34 Registers */
+
+#define bfin_read_DMA34_NEXT_DESC_PTR() 	bfin_read32(DMA34_NEXT_DESC_PTR)
+#define bfin_write_DMA34_NEXT_DESC_PTR(val) 	bfin_write32(DMA34_NEXT_DESC_PTR, val)
+#define bfin_read_DMA34_START_ADDR() 		bfin_read32(DMA34_START_ADDR)
+#define bfin_write_DMA34_START_ADDR(val) 	bfin_write32(DMA34_START_ADDR, val)
+#define bfin_read_DMA34_CONFIG()		bfin_read32(DMA34_CONFIG)
+#define bfin_write_DMA34_CONFIG(val)		bfin_write32(DMA34_CONFIG, val)
+#define bfin_read_DMA34_X_COUNT()		bfin_read32(DMA34_X_COUNT)
+#define bfin_write_DMA34_X_COUNT(val)		bfin_write32(DMA34_X_COUNT, val)
+#define bfin_read_DMA34_X_MODIFY()		bfin_read32(DMA34_X_MODIFY)
+#define bfin_write_DMA34_X_MODIFY(val) 		bfin_write32(DMA34_X_MODIFY, val)
+#define bfin_read_DMA34_Y_COUNT()		bfin_read32(DMA34_Y_COUNT)
+#define bfin_write_DMA34_Y_COUNT(val)		bfin_write32(DMA34_Y_COUNT, val)
+#define bfin_read_DMA34_Y_MODIFY()		bfin_read32(DMA34_Y_MODIFY)
+#define bfin_write_DMA34_Y_MODIFY(val) 		bfin_write32(DMA34_Y_MODIFY, val)
+#define bfin_read_DMA34_CURR_DESC_PTR() 	bfin_read32(DMA34_CURR_DESC_PTR)
+#define bfin_write_DMA34_CURR_DESC_PTR(val) 	bfin_write32(DMA34_CURR_DESC_PTR, val)
+#define bfin_read_DMA34_PREV_DESC_PTR() 	bfin_read32(DMA34_PREV_DESC_PTR)
+#define bfin_write_DMA34_PREV_DESC_PTR(val) 	bfin_write32(DMA34_PREV_DESC_PTR, val)
+#define bfin_read_DMA34_CURR_ADDR() 		bfin_read32(DMA34_CURR_ADDR)
+#define bfin_write_DMA34_CURR_ADDR(val) 	bfin_write32(DMA34_CURR_ADDR, val)
+#define bfin_read_DMA34_IRQ_STATUS()		bfin_read32(DMA34_IRQ_STATUS)
+#define bfin_write_DMA34_IRQ_STATUS(val)	bfin_write32(DMA34_IRQ_STATUS, val)
+#define bfin_read_DMA34_CURR_X_COUNT()		bfin_read32(DMA34_CURR_X_COUNT)
+#define bfin_write_DMA34_CURR_X_COUNT(val)	bfin_write32(DMA34_CURR_X_COUNT, val)
+#define bfin_read_DMA34_CURR_Y_COUNT()		bfin_read32(DMA34_CURR_Y_COUNT)
+#define bfin_write_DMA34_CURR_Y_COUNT(val)	bfin_write32(DMA34_CURR_Y_COUNT, val)
+#define bfin_read_DMA34_BWL_COUNT()		bfin_read32(DMA34_BWL_COUNT)
+#define bfin_write_DMA34_BWL_COUNT(val)		bfin_write32(DMA34_BWL_COUNT, val)
+#define bfin_read_DMA34_CURR_BWL_COUNT()	bfin_read32(DMA34_CURR_BWL_COUNT)
+#define bfin_write_DMA34_CURR_BWL_COUNT(val)	bfin_write32(DMA34_CURR_BWL_COUNT, val)
+#define bfin_read_DMA34_BWM_COUNT()		bfin_read32(DMA34_BWM_COUNT)
+#define bfin_write_DMA34_BWM_COUNT(val)		bfin_write32(DMA34_BWM_COUNT, val)
+#define bfin_read_DMA34_CURR_BWM_COUNT()	bfin_read32(DMA34_CURR_BWM_COUNT)
+#define bfin_write_DMA34_CURR_BWM_COUNT(val)	bfin_write32(DMA34_CURR_BWM_COUNT, val)
+
+/* DMA Channel 35 Registers */
+
+#define bfin_read_DMA35_NEXT_DESC_PTR() 	bfin_read32(DMA35_NEXT_DESC_PTR)
+#define bfin_write_DMA35_NEXT_DESC_PTR(val) 	bfin_write32(DMA35_NEXT_DESC_PTR, val)
+#define bfin_read_DMA35_START_ADDR() 		bfin_read32(DMA35_START_ADDR)
+#define bfin_write_DMA35_START_ADDR(val) 	bfin_write32(DMA35_START_ADDR, val)
+#define bfin_read_DMA35_CONFIG()		bfin_read32(DMA35_CONFIG)
+#define bfin_write_DMA35_CONFIG(val)		bfin_write32(DMA35_CONFIG, val)
+#define bfin_read_DMA35_X_COUNT()		bfin_read32(DMA35_X_COUNT)
+#define bfin_write_DMA35_X_COUNT(val)		bfin_write32(DMA35_X_COUNT, val)
+#define bfin_read_DMA35_X_MODIFY()		bfin_read32(DMA35_X_MODIFY)
+#define bfin_write_DMA35_X_MODIFY(val) 		bfin_write32(DMA35_X_MODIFY, val)
+#define bfin_read_DMA35_Y_COUNT()		bfin_read32(DMA35_Y_COUNT)
+#define bfin_write_DMA35_Y_COUNT(val)		bfin_write32(DMA35_Y_COUNT, val)
+#define bfin_read_DMA35_Y_MODIFY()		bfin_read32(DMA35_Y_MODIFY)
+#define bfin_write_DMA35_Y_MODIFY(val) 		bfin_write32(DMA35_Y_MODIFY, val)
+#define bfin_read_DMA35_CURR_DESC_PTR() 	bfin_read32(DMA35_CURR_DESC_PTR)
+#define bfin_write_DMA35_CURR_DESC_PTR(val) 	bfin_write32(DMA35_CURR_DESC_PTR, val)
+#define bfin_read_DMA35_PREV_DESC_PTR() 	bfin_read32(DMA35_PREV_DESC_PTR)
+#define bfin_write_DMA35_PREV_DESC_PTR(val) 	bfin_write32(DMA35_PREV_DESC_PTR, val)
+#define bfin_read_DMA35_CURR_ADDR() 		bfin_read32(DMA35_CURR_ADDR)
+#define bfin_write_DMA35_CURR_ADDR(val) 	bfin_write32(DMA35_CURR_ADDR, val)
+#define bfin_read_DMA35_IRQ_STATUS()		bfin_read32(DMA35_IRQ_STATUS)
+#define bfin_write_DMA35_IRQ_STATUS(val)	bfin_write32(DMA35_IRQ_STATUS, val)
+#define bfin_read_DMA35_CURR_X_COUNT()		bfin_read32(DMA35_CURR_X_COUNT)
+#define bfin_write_DMA35_CURR_X_COUNT(val)	bfin_write32(DMA35_CURR_X_COUNT, val)
+#define bfin_read_DMA35_CURR_Y_COUNT()		bfin_read32(DMA35_CURR_Y_COUNT)
+#define bfin_write_DMA35_CURR_Y_COUNT(val)	bfin_write32(DMA35_CURR_Y_COUNT, val)
+#define bfin_read_DMA35_BWL_COUNT()		bfin_read32(DMA35_BWL_COUNT)
+#define bfin_write_DMA35_BWL_COUNT(val)		bfin_write32(DMA35_BWL_COUNT, val)
+#define bfin_read_DMA35_CURR_BWL_COUNT()	bfin_read32(DMA35_CURR_BWL_COUNT)
+#define bfin_write_DMA35_CURR_BWL_COUNT(val)	bfin_write32(DMA35_CURR_BWL_COUNT, val)
+#define bfin_read_DMA35_BWM_COUNT()		bfin_read32(DMA35_BWM_COUNT)
+#define bfin_write_DMA35_BWM_COUNT(val)		bfin_write32(DMA35_BWM_COUNT, val)
+#define bfin_read_DMA35_CURR_BWM_COUNT()	bfin_read32(DMA35_CURR_BWM_COUNT)
+#define bfin_write_DMA35_CURR_BWM_COUNT(val)	bfin_write32(DMA35_CURR_BWM_COUNT, val)
+
+/* DMA Channel 36 Registers */
+
+#define bfin_read_DMA36_NEXT_DESC_PTR() 	bfin_read32(DMA36_NEXT_DESC_PTR)
+#define bfin_write_DMA36_NEXT_DESC_PTR(val) 	bfin_write32(DMA36_NEXT_DESC_PTR, val)
+#define bfin_read_DMA36_START_ADDR() 		bfin_read32(DMA36_START_ADDR)
+#define bfin_write_DMA36_START_ADDR(val) 	bfin_write32(DMA36_START_ADDR, val)
+#define bfin_read_DMA36_CONFIG()		bfin_read32(DMA36_CONFIG)
+#define bfin_write_DMA36_CONFIG(val)		bfin_write32(DMA36_CONFIG, val)
+#define bfin_read_DMA36_X_COUNT()		bfin_read32(DMA36_X_COUNT)
+#define bfin_write_DMA36_X_COUNT(val)		bfin_write32(DMA36_X_COUNT, val)
+#define bfin_read_DMA36_X_MODIFY()		bfin_read32(DMA36_X_MODIFY)
+#define bfin_write_DMA36_X_MODIFY(val) 		bfin_write32(DMA36_X_MODIFY, val)
+#define bfin_read_DMA36_Y_COUNT()		bfin_read32(DMA36_Y_COUNT)
+#define bfin_write_DMA36_Y_COUNT(val)		bfin_write32(DMA36_Y_COUNT, val)
+#define bfin_read_DMA36_Y_MODIFY()		bfin_read32(DMA36_Y_MODIFY)
+#define bfin_write_DMA36_Y_MODIFY(val) 		bfin_write32(DMA36_Y_MODIFY, val)
+#define bfin_read_DMA36_CURR_DESC_PTR() 	bfin_read32(DMA36_CURR_DESC_PTR)
+#define bfin_write_DMA36_CURR_DESC_PTR(val) 	bfin_write32(DMA36_CURR_DESC_PTR, val)
+#define bfin_read_DMA36_PREV_DESC_PTR() 	bfin_read32(DMA36_PREV_DESC_PTR)
+#define bfin_write_DMA36_PREV_DESC_PTR(val) 	bfin_write32(DMA36_PREV_DESC_PTR, val)
+#define bfin_read_DMA36_CURR_ADDR() 		bfin_read32(DMA36_CURR_ADDR)
+#define bfin_write_DMA36_CURR_ADDR(val) 	bfin_write32(DMA36_CURR_ADDR, val)
+#define bfin_read_DMA36_IRQ_STATUS()		bfin_read32(DMA36_IRQ_STATUS)
+#define bfin_write_DMA36_IRQ_STATUS(val)	bfin_write32(DMA36_IRQ_STATUS, val)
+#define bfin_read_DMA36_CURR_X_COUNT()		bfin_read32(DMA36_CURR_X_COUNT)
+#define bfin_write_DMA36_CURR_X_COUNT(val)	bfin_write32(DMA36_CURR_X_COUNT, val)
+#define bfin_read_DMA36_CURR_Y_COUNT()		bfin_read32(DMA36_CURR_Y_COUNT)
+#define bfin_write_DMA36_CURR_Y_COUNT(val)	bfin_write32(DMA36_CURR_Y_COUNT, val)
+#define bfin_read_DMA36_BWL_COUNT()		bfin_read32(DMA36_BWL_COUNT)
+#define bfin_write_DMA36_BWL_COUNT(val)		bfin_write32(DMA36_BWL_COUNT, val)
+#define bfin_read_DMA36_CURR_BWL_COUNT()	bfin_read32(DMA36_CURR_BWL_COUNT)
+#define bfin_write_DMA36_CURR_BWL_COUNT(val)	bfin_write32(DMA36_CURR_BWL_COUNT, val)
+#define bfin_read_DMA36_BWM_COUNT()		bfin_read32(DMA36_BWM_COUNT)
+#define bfin_write_DMA36_BWM_COUNT(val)		bfin_write32(DMA36_BWM_COUNT, val)
+#define bfin_read_DMA36_CURR_BWM_COUNT()	bfin_read32(DMA36_CURR_BWM_COUNT)
+#define bfin_write_DMA36_CURR_BWM_COUNT(val)	bfin_write32(DMA36_CURR_BWM_COUNT, val)
+
+/* DMA Channel 37 Registers */
+
+#define bfin_read_DMA37_NEXT_DESC_PTR() 	bfin_read32(DMA37_NEXT_DESC_PTR)
+#define bfin_write_DMA37_NEXT_DESC_PTR(val) 	bfin_write32(DMA37_NEXT_DESC_PTR, val)
+#define bfin_read_DMA37_START_ADDR() 		bfin_read32(DMA37_START_ADDR)
+#define bfin_write_DMA37_START_ADDR(val) 	bfin_write32(DMA37_START_ADDR, val)
+#define bfin_read_DMA37_CONFIG()		bfin_read32(DMA37_CONFIG)
+#define bfin_write_DMA37_CONFIG(val)		bfin_write32(DMA37_CONFIG, val)
+#define bfin_read_DMA37_X_COUNT()		bfin_read32(DMA37_X_COUNT)
+#define bfin_write_DMA37_X_COUNT(val)		bfin_write32(DMA37_X_COUNT, val)
+#define bfin_read_DMA37_X_MODIFY()		bfin_read32(DMA37_X_MODIFY)
+#define bfin_write_DMA37_X_MODIFY(val) 		bfin_write32(DMA37_X_MODIFY, val)
+#define bfin_read_DMA37_Y_COUNT()		bfin_read32(DMA37_Y_COUNT)
+#define bfin_write_DMA37_Y_COUNT(val)		bfin_write32(DMA37_Y_COUNT, val)
+#define bfin_read_DMA37_Y_MODIFY()		bfin_read32(DMA37_Y_MODIFY)
+#define bfin_write_DMA37_Y_MODIFY(val) 		bfin_write32(DMA37_Y_MODIFY, val)
+#define bfin_read_DMA37_CURR_DESC_PTR() 	bfin_read32(DMA37_CURR_DESC_PTR)
+#define bfin_write_DMA37_CURR_DESC_PTR(val) 	bfin_write32(DMA37_CURR_DESC_PTR, val)
+#define bfin_read_DMA37_PREV_DESC_PTR() 	bfin_read32(DMA37_PREV_DESC_PTR)
+#define bfin_write_DMA37_PREV_DESC_PTR(val) 	bfin_write32(DMA37_PREV_DESC_PTR, val)
+#define bfin_read_DMA37_CURR_ADDR() 		bfin_read32(DMA37_CURR_ADDR)
+#define bfin_write_DMA37_CURR_ADDR(val) 	bfin_write32(DMA37_CURR_ADDR, val)
+#define bfin_read_DMA37_IRQ_STATUS()		bfin_read32(DMA37_IRQ_STATUS)
+#define bfin_write_DMA37_IRQ_STATUS(val)	bfin_write32(DMA37_IRQ_STATUS, val)
+#define bfin_read_DMA37_CURR_X_COUNT()		bfin_read32(DMA37_CURR_X_COUNT)
+#define bfin_write_DMA37_CURR_X_COUNT(val)	bfin_write32(DMA37_CURR_X_COUNT, val)
+#define bfin_read_DMA37_CURR_Y_COUNT()		bfin_read32(DMA37_CURR_Y_COUNT)
+#define bfin_write_DMA37_CURR_Y_COUNT(val)	bfin_write32(DMA37_CURR_Y_COUNT, val)
+#define bfin_read_DMA37_BWL_COUNT()		bfin_read32(DMA37_BWL_COUNT)
+#define bfin_write_DMA37_BWL_COUNT(val)		bfin_write32(DMA37_BWL_COUNT, val)
+#define bfin_read_DMA37_CURR_BWL_COUNT()	bfin_read32(DMA37_CURR_BWL_COUNT)
+#define bfin_write_DMA37_CURR_BWL_COUNT(val)	bfin_write32(DMA37_CURR_BWL_COUNT, val)
+#define bfin_read_DMA37_BWM_COUNT()		bfin_read32(DMA37_BWM_COUNT)
+#define bfin_write_DMA37_BWM_COUNT(val)		bfin_write32(DMA37_BWM_COUNT, val)
+#define bfin_read_DMA37_CURR_BWM_COUNT()	bfin_read32(DMA37_CURR_BWM_COUNT)
+#define bfin_write_DMA37_CURR_BWM_COUNT(val)	bfin_write32(DMA37_CURR_BWM_COUNT, val)
+
+/* DMA Channel 38 Registers */
+
+#define bfin_read_DMA38_NEXT_DESC_PTR() 	bfin_read32(DMA38_NEXT_DESC_PTR)
+#define bfin_write_DMA38_NEXT_DESC_PTR(val) 	bfin_write32(DMA38_NEXT_DESC_PTR, val)
+#define bfin_read_DMA38_START_ADDR() 		bfin_read32(DMA38_START_ADDR)
+#define bfin_write_DMA38_START_ADDR(val) 	bfin_write32(DMA38_START_ADDR, val)
+#define bfin_read_DMA38_CONFIG()		bfin_read32(DMA38_CONFIG)
+#define bfin_write_DMA38_CONFIG(val)		bfin_write32(DMA38_CONFIG, val)
+#define bfin_read_DMA38_X_COUNT()		bfin_read32(DMA38_X_COUNT)
+#define bfin_write_DMA38_X_COUNT(val)		bfin_write32(DMA38_X_COUNT, val)
+#define bfin_read_DMA38_X_MODIFY()		bfin_read32(DMA38_X_MODIFY)
+#define bfin_write_DMA38_X_MODIFY(val) 		bfin_write32(DMA38_X_MODIFY, val)
+#define bfin_read_DMA38_Y_COUNT()		bfin_read32(DMA38_Y_COUNT)
+#define bfin_write_DMA38_Y_COUNT(val)		bfin_write32(DMA38_Y_COUNT, val)
+#define bfin_read_DMA38_Y_MODIFY()		bfin_read32(DMA38_Y_MODIFY)
+#define bfin_write_DMA38_Y_MODIFY(val) 		bfin_write32(DMA38_Y_MODIFY, val)
+#define bfin_read_DMA38_CURR_DESC_PTR() 	bfin_read32(DMA38_CURR_DESC_PTR)
+#define bfin_write_DMA38_CURR_DESC_PTR(val) 	bfin_write32(DMA38_CURR_DESC_PTR, val)
+#define bfin_read_DMA38_PREV_DESC_PTR() 	bfin_read32(DMA38_PREV_DESC_PTR)
+#define bfin_write_DMA38_PREV_DESC_PTR(val) 	bfin_write32(DMA38_PREV_DESC_PTR, val)
+#define bfin_read_DMA38_CURR_ADDR() 		bfin_read32(DMA38_CURR_ADDR)
+#define bfin_write_DMA38_CURR_ADDR(val) 	bfin_write32(DMA38_CURR_ADDR, val)
+#define bfin_read_DMA38_IRQ_STATUS()		bfin_read32(DMA38_IRQ_STATUS)
+#define bfin_write_DMA38_IRQ_STATUS(val)	bfin_write32(DMA38_IRQ_STATUS, val)
+#define bfin_read_DMA38_CURR_X_COUNT()		bfin_read32(DMA38_CURR_X_COUNT)
+#define bfin_write_DMA38_CURR_X_COUNT(val)	bfin_write32(DMA38_CURR_X_COUNT, val)
+#define bfin_read_DMA38_CURR_Y_COUNT()		bfin_read32(DMA38_CURR_Y_COUNT)
+#define bfin_write_DMA38_CURR_Y_COUNT(val)	bfin_write32(DMA38_CURR_Y_COUNT, val)
+#define bfin_read_DMA38_BWL_COUNT()		bfin_read32(DMA38_BWL_COUNT)
+#define bfin_write_DMA38_BWL_COUNT(val)		bfin_write32(DMA38_BWL_COUNT, val)
+#define bfin_read_DMA38_CURR_BWL_COUNT()	bfin_read32(DMA38_CURR_BWL_COUNT)
+#define bfin_write_DMA38_CURR_BWL_COUNT(val)	bfin_write32(DMA38_CURR_BWL_COUNT, val)
+#define bfin_read_DMA38_BWM_COUNT()		bfin_read32(DMA38_BWM_COUNT)
+#define bfin_write_DMA38_BWM_COUNT(val)		bfin_write32(DMA38_BWM_COUNT, val)
+#define bfin_read_DMA38_CURR_BWM_COUNT()	bfin_read32(DMA38_CURR_BWM_COUNT)
+#define bfin_write_DMA38_CURR_BWM_COUNT(val)	bfin_write32(DMA38_CURR_BWM_COUNT, val)
+
+/* DMA Channel 39 Registers */
+
+#define bfin_read_DMA39_NEXT_DESC_PTR() 	bfin_read32(DMA39_NEXT_DESC_PTR)
+#define bfin_write_DMA39_NEXT_DESC_PTR(val) 	bfin_write32(DMA39_NEXT_DESC_PTR, val)
+#define bfin_read_DMA39_START_ADDR() 		bfin_read32(DMA39_START_ADDR)
+#define bfin_write_DMA39_START_ADDR(val) 	bfin_write32(DMA39_START_ADDR, val)
+#define bfin_read_DMA39_CONFIG()		bfin_read32(DMA39_CONFIG)
+#define bfin_write_DMA39_CONFIG(val)		bfin_write32(DMA39_CONFIG, val)
+#define bfin_read_DMA39_X_COUNT()		bfin_read32(DMA39_X_COUNT)
+#define bfin_write_DMA39_X_COUNT(val)		bfin_write32(DMA39_X_COUNT, val)
+#define bfin_read_DMA39_X_MODIFY()		bfin_read32(DMA39_X_MODIFY)
+#define bfin_write_DMA39_X_MODIFY(val) 		bfin_write32(DMA39_X_MODIFY, val)
+#define bfin_read_DMA39_Y_COUNT()		bfin_read32(DMA39_Y_COUNT)
+#define bfin_write_DMA39_Y_COUNT(val)		bfin_write32(DMA39_Y_COUNT, val)
+#define bfin_read_DMA39_Y_MODIFY()		bfin_read32(DMA39_Y_MODIFY)
+#define bfin_write_DMA39_Y_MODIFY(val) 		bfin_write32(DMA39_Y_MODIFY, val)
+#define bfin_read_DMA39_CURR_DESC_PTR() 	bfin_read32(DMA39_CURR_DESC_PTR)
+#define bfin_write_DMA39_CURR_DESC_PTR(val) 	bfin_write32(DMA39_CURR_DESC_PTR, val)
+#define bfin_read_DMA39_PREV_DESC_PTR() 	bfin_read32(DMA39_PREV_DESC_PTR)
+#define bfin_write_DMA39_PREV_DESC_PTR(val) 	bfin_write32(DMA39_PREV_DESC_PTR, val)
+#define bfin_read_DMA39_CURR_ADDR() 		bfin_read32(DMA39_CURR_ADDR)
+#define bfin_write_DMA39_CURR_ADDR(val) 	bfin_write32(DMA39_CURR_ADDR, val)
+#define bfin_read_DMA39_IRQ_STATUS()		bfin_read32(DMA39_IRQ_STATUS)
+#define bfin_write_DMA39_IRQ_STATUS(val)	bfin_write32(DMA39_IRQ_STATUS, val)
+#define bfin_read_DMA39_CURR_X_COUNT()		bfin_read32(DMA39_CURR_X_COUNT)
+#define bfin_write_DMA39_CURR_X_COUNT(val)	bfin_write32(DMA39_CURR_X_COUNT, val)
+#define bfin_read_DMA39_CURR_Y_COUNT()		bfin_read32(DMA39_CURR_Y_COUNT)
+#define bfin_write_DMA39_CURR_Y_COUNT(val)	bfin_write32(DMA39_CURR_Y_COUNT, val)
+#define bfin_read_DMA39_BWL_COUNT()		bfin_read32(DMA39_BWL_COUNT)
+#define bfin_write_DMA39_BWL_COUNT(val)		bfin_write32(DMA39_BWL_COUNT, val)
+#define bfin_read_DMA39_CURR_BWL_COUNT()	bfin_read32(DMA39_CURR_BWL_COUNT)
+#define bfin_write_DMA39_CURR_BWL_COUNT(val)	bfin_write32(DMA39_CURR_BWL_COUNT, val)
+#define bfin_read_DMA39_BWM_COUNT()		bfin_read32(DMA39_BWM_COUNT)
+#define bfin_write_DMA39_BWM_COUNT(val)		bfin_write32(DMA39_BWM_COUNT, val)
+#define bfin_read_DMA39_CURR_BWM_COUNT()	bfin_read32(DMA39_CURR_BWM_COUNT)
+#define bfin_write_DMA39_CURR_BWM_COUNT(val)	bfin_write32(DMA39_CURR_BWM_COUNT, val)
+
+/* DMA Channel 40 Registers */
+
+#define bfin_read_DMA40_NEXT_DESC_PTR() 	bfin_read32(DMA40_NEXT_DESC_PTR)
+#define bfin_write_DMA40_NEXT_DESC_PTR(val) 	bfin_write32(DMA40_NEXT_DESC_PTR, val)
+#define bfin_read_DMA40_START_ADDR() 		bfin_read32(DMA40_START_ADDR)
+#define bfin_write_DMA40_START_ADDR(val) 	bfin_write32(DMA40_START_ADDR, val)
+#define bfin_read_DMA40_CONFIG()		bfin_read32(DMA40_CONFIG)
+#define bfin_write_DMA40_CONFIG(val)		bfin_write32(DMA40_CONFIG, val)
+#define bfin_read_DMA40_X_COUNT()		bfin_read32(DMA40_X_COUNT)
+#define bfin_write_DMA40_X_COUNT(val)		bfin_write32(DMA40_X_COUNT, val)
+#define bfin_read_DMA40_X_MODIFY()		bfin_read32(DMA40_X_MODIFY)
+#define bfin_write_DMA40_X_MODIFY(val) 		bfin_write32(DMA40_X_MODIFY, val)
+#define bfin_read_DMA40_Y_COUNT()		bfin_read32(DMA40_Y_COUNT)
+#define bfin_write_DMA40_Y_COUNT(val)		bfin_write32(DMA40_Y_COUNT, val)
+#define bfin_read_DMA40_Y_MODIFY()		bfin_read32(DMA40_Y_MODIFY)
+#define bfin_write_DMA40_Y_MODIFY(val) 		bfin_write32(DMA40_Y_MODIFY, val)
+#define bfin_read_DMA40_CURR_DESC_PTR() 	bfin_read32(DMA40_CURR_DESC_PTR)
+#define bfin_write_DMA40_CURR_DESC_PTR(val) 	bfin_write32(DMA40_CURR_DESC_PTR, val)
+#define bfin_read_DMA40_PREV_DESC_PTR() 	bfin_read32(DMA40_PREV_DESC_PTR)
+#define bfin_write_DMA40_PREV_DESC_PTR(val) 	bfin_write32(DMA40_PREV_DESC_PTR, val)
+#define bfin_read_DMA40_CURR_ADDR() 		bfin_read32(DMA40_CURR_ADDR)
+#define bfin_write_DMA40_CURR_ADDR(val) 	bfin_write32(DMA40_CURR_ADDR, val)
+#define bfin_read_DMA40_IRQ_STATUS()		bfin_read32(DMA40_IRQ_STATUS)
+#define bfin_write_DMA40_IRQ_STATUS(val)	bfin_write32(DMA40_IRQ_STATUS, val)
+#define bfin_read_DMA40_CURR_X_COUNT()		bfin_read32(DMA40_CURR_X_COUNT)
+#define bfin_write_DMA40_CURR_X_COUNT(val)	bfin_write32(DMA40_CURR_X_COUNT, val)
+#define bfin_read_DMA40_CURR_Y_COUNT()		bfin_read32(DMA40_CURR_Y_COUNT)
+#define bfin_write_DMA40_CURR_Y_COUNT(val)	bfin_write32(DMA40_CURR_Y_COUNT, val)
+#define bfin_read_DMA40_BWL_COUNT()		bfin_read32(DMA40_BWL_COUNT)
+#define bfin_write_DMA40_BWL_COUNT(val)		bfin_write32(DMA40_BWL_COUNT, val)
+#define bfin_read_DMA40_CURR_BWL_COUNT()	bfin_read32(DMA40_CURR_BWL_COUNT)
+#define bfin_write_DMA40_CURR_BWL_COUNT(val)	bfin_write32(DMA40_CURR_BWL_COUNT, val)
+#define bfin_read_DMA40_BWM_COUNT()		bfin_read32(DMA40_BWM_COUNT)
+#define bfin_write_DMA40_BWM_COUNT(val)		bfin_write32(DMA40_BWM_COUNT, val)
+#define bfin_read_DMA40_CURR_BWM_COUNT()	bfin_read32(DMA40_CURR_BWM_COUNT)
+#define bfin_write_DMA40_CURR_BWM_COUNT(val)	bfin_write32(DMA40_CURR_BWM_COUNT, val)
+
+/* DMA Channel 41 Registers */
+
+#define bfin_read_DMA41_NEXT_DESC_PTR() 	bfin_read32(DMA41_NEXT_DESC_PTR)
+#define bfin_write_DMA41_NEXT_DESC_PTR(val) 	bfin_write32(DMA41_NEXT_DESC_PTR, val)
+#define bfin_read_DMA41_START_ADDR() 		bfin_read32(DMA41_START_ADDR)
+#define bfin_write_DMA41_START_ADDR(val) 	bfin_write32(DMA41_START_ADDR, val)
+#define bfin_read_DMA41_CONFIG()		bfin_read32(DMA41_CONFIG)
+#define bfin_write_DMA41_CONFIG(val)		bfin_write32(DMA41_CONFIG, val)
+#define bfin_read_DMA41_X_COUNT()		bfin_read32(DMA41_X_COUNT)
+#define bfin_write_DMA41_X_COUNT(val)		bfin_write32(DMA41_X_COUNT, val)
+#define bfin_read_DMA41_X_MODIFY()		bfin_read32(DMA41_X_MODIFY)
+#define bfin_write_DMA41_X_MODIFY(val) 		bfin_write32(DMA41_X_MODIFY, val)
+#define bfin_read_DMA41_Y_COUNT()		bfin_read32(DMA41_Y_COUNT)
+#define bfin_write_DMA41_Y_COUNT(val)		bfin_write32(DMA41_Y_COUNT, val)
+#define bfin_read_DMA41_Y_MODIFY()		bfin_read32(DMA41_Y_MODIFY)
+#define bfin_write_DMA41_Y_MODIFY(val) 		bfin_write32(DMA41_Y_MODIFY, val)
+#define bfin_read_DMA41_CURR_DESC_PTR() 	bfin_read32(DMA41_CURR_DESC_PTR)
+#define bfin_write_DMA41_CURR_DESC_PTR(val) 	bfin_write32(DMA41_CURR_DESC_PTR, val)
+#define bfin_read_DMA41_PREV_DESC_PTR() 	bfin_read32(DMA41_PREV_DESC_PTR)
+#define bfin_write_DMA41_PREV_DESC_PTR(val) 	bfin_write32(DMA41_PREV_DESC_PTR, val)
+#define bfin_read_DMA41_CURR_ADDR() 		bfin_read32(DMA41_CURR_ADDR)
+#define bfin_write_DMA41_CURR_ADDR(val) 	bfin_write32(DMA41_CURR_ADDR, val)
+#define bfin_read_DMA41_IRQ_STATUS()		bfin_read32(DMA41_IRQ_STATUS)
+#define bfin_write_DMA41_IRQ_STATUS(val)	bfin_write32(DMA41_IRQ_STATUS, val)
+#define bfin_read_DMA41_CURR_X_COUNT()		bfin_read32(DMA41_CURR_X_COUNT)
+#define bfin_write_DMA41_CURR_X_COUNT(val)	bfin_write32(DMA41_CURR_X_COUNT, val)
+#define bfin_read_DMA41_CURR_Y_COUNT()		bfin_read32(DMA41_CURR_Y_COUNT)
+#define bfin_write_DMA41_CURR_Y_COUNT(val)	bfin_write32(DMA41_CURR_Y_COUNT, val)
+#define bfin_read_DMA41_BWL_COUNT()		bfin_read32(DMA41_BWL_COUNT)
+#define bfin_write_DMA41_BWL_COUNT(val)		bfin_write32(DMA41_BWL_COUNT, val)
+#define bfin_read_DMA41_CURR_BWL_COUNT()	bfin_read32(DMA41_CURR_BWL_COUNT)
+#define bfin_write_DMA41_CURR_BWL_COUNT(val)	bfin_write32(DMA41_CURR_BWL_COUNT, val)
+#define bfin_read_DMA41_BWM_COUNT()		bfin_read32(DMA41_BWM_COUNT)
+#define bfin_write_DMA41_BWM_COUNT(val)		bfin_write32(DMA41_BWM_COUNT, val)
+#define bfin_read_DMA41_CURR_BWM_COUNT()	bfin_read32(DMA41_CURR_BWM_COUNT)
+#define bfin_write_DMA41_CURR_BWM_COUNT(val)	bfin_write32(DMA41_CURR_BWM_COUNT, val)
+
+/* DMA Channel 42 Registers */
+
+#define bfin_read_DMA42_NEXT_DESC_PTR() 	bfin_read32(DMA42_NEXT_DESC_PTR)
+#define bfin_write_DMA42_NEXT_DESC_PTR(val) 	bfin_write32(DMA42_NEXT_DESC_PTR, val)
+#define bfin_read_DMA42_START_ADDR() 		bfin_read32(DMA42_START_ADDR)
+#define bfin_write_DMA42_START_ADDR(val) 	bfin_write32(DMA42_START_ADDR, val)
+#define bfin_read_DMA42_CONFIG()		bfin_read32(DMA42_CONFIG)
+#define bfin_write_DMA42_CONFIG(val)		bfin_write32(DMA42_CONFIG, val)
+#define bfin_read_DMA42_X_COUNT()		bfin_read32(DMA42_X_COUNT)
+#define bfin_write_DMA42_X_COUNT(val)		bfin_write32(DMA42_X_COUNT, val)
+#define bfin_read_DMA42_X_MODIFY()		bfin_read32(DMA42_X_MODIFY)
+#define bfin_write_DMA42_X_MODIFY(val) 		bfin_write32(DMA42_X_MODIFY, val)
+#define bfin_read_DMA42_Y_COUNT()		bfin_read32(DMA42_Y_COUNT)
+#define bfin_write_DMA42_Y_COUNT(val)		bfin_write32(DMA42_Y_COUNT, val)
+#define bfin_read_DMA42_Y_MODIFY()		bfin_read32(DMA42_Y_MODIFY)
+#define bfin_write_DMA42_Y_MODIFY(val) 		bfin_write32(DMA42_Y_MODIFY, val)
+#define bfin_read_DMA42_CURR_DESC_PTR() 	bfin_read32(DMA42_CURR_DESC_PTR)
+#define bfin_write_DMA42_CURR_DESC_PTR(val) 	bfin_write32(DMA42_CURR_DESC_PTR, val)
+#define bfin_read_DMA42_PREV_DESC_PTR() 	bfin_read32(DMA42_PREV_DESC_PTR)
+#define bfin_write_DMA42_PREV_DESC_PTR(val) 	bfin_write32(DMA42_PREV_DESC_PTR, val)
+#define bfin_read_DMA42_CURR_ADDR() 		bfin_read32(DMA42_CURR_ADDR)
+#define bfin_write_DMA42_CURR_ADDR(val) 	bfin_write32(DMA42_CURR_ADDR, val)
+#define bfin_read_DMA42_IRQ_STATUS()		bfin_read32(DMA42_IRQ_STATUS)
+#define bfin_write_DMA42_IRQ_STATUS(val)	bfin_write32(DMA42_IRQ_STATUS, val)
+#define bfin_read_DMA42_CURR_X_COUNT()		bfin_read32(DMA42_CURR_X_COUNT)
+#define bfin_write_DMA42_CURR_X_COUNT(val)	bfin_write32(DMA42_CURR_X_COUNT, val)
+#define bfin_read_DMA42_CURR_Y_COUNT()		bfin_read32(DMA42_CURR_Y_COUNT)
+#define bfin_write_DMA42_CURR_Y_COUNT(val)	bfin_write32(DMA42_CURR_Y_COUNT, val)
+#define bfin_read_DMA42_BWL_COUNT()		bfin_read32(DMA42_BWL_COUNT)
+#define bfin_write_DMA42_BWL_COUNT(val)		bfin_write32(DMA42_BWL_COUNT, val)
+#define bfin_read_DMA42_CURR_BWL_COUNT()	bfin_read32(DMA42_CURR_BWL_COUNT)
+#define bfin_write_DMA42_CURR_BWL_COUNT(val)	bfin_write32(DMA42_CURR_BWL_COUNT, val)
+#define bfin_read_DMA42_BWM_COUNT()		bfin_read32(DMA42_BWM_COUNT)
+#define bfin_write_DMA42_BWM_COUNT(val)		bfin_write32(DMA42_BWM_COUNT, val)
+#define bfin_read_DMA42_CURR_BWM_COUNT()	bfin_read32(DMA42_CURR_BWM_COUNT)
+#define bfin_write_DMA42_CURR_BWM_COUNT(val)	bfin_write32(DMA42_CURR_BWM_COUNT, val)
+
+/* DMA Channel 43 Registers */
+
+#define bfin_read_DMA43_NEXT_DESC_PTR() 	bfin_read32(DMA43_NEXT_DESC_PTR)
+#define bfin_write_DMA43_NEXT_DESC_PTR(val) 	bfin_write32(DMA43_NEXT_DESC_PTR, val)
+#define bfin_read_DMA43_START_ADDR() 		bfin_read32(DMA43_START_ADDR)
+#define bfin_write_DMA43_START_ADDR(val) 	bfin_write32(DMA43_START_ADDR, val)
+#define bfin_read_DMA43_CONFIG()		bfin_read32(DMA43_CONFIG)
+#define bfin_write_DMA43_CONFIG(val)		bfin_write32(DMA43_CONFIG, val)
+#define bfin_read_DMA43_X_COUNT()		bfin_read32(DMA43_X_COUNT)
+#define bfin_write_DMA43_X_COUNT(val)		bfin_write32(DMA43_X_COUNT, val)
+#define bfin_read_DMA43_X_MODIFY()		bfin_read32(DMA43_X_MODIFY)
+#define bfin_write_DMA43_X_MODIFY(val) 		bfin_write32(DMA43_X_MODIFY, val)
+#define bfin_read_DMA43_Y_COUNT()		bfin_read32(DMA43_Y_COUNT)
+#define bfin_write_DMA43_Y_COUNT(val)		bfin_write32(DMA43_Y_COUNT, val)
+#define bfin_read_DMA43_Y_MODIFY()		bfin_read32(DMA43_Y_MODIFY)
+#define bfin_write_DMA43_Y_MODIFY(val) 		bfin_write32(DMA43_Y_MODIFY, val)
+#define bfin_read_DMA43_CURR_DESC_PTR() 	bfin_read32(DMA43_CURR_DESC_PTR)
+#define bfin_write_DMA43_CURR_DESC_PTR(val) 	bfin_write32(DMA43_CURR_DESC_PTR, val)
+#define bfin_read_DMA43_PREV_DESC_PTR() 	bfin_read32(DMA43_PREV_DESC_PTR)
+#define bfin_write_DMA43_PREV_DESC_PTR(val) 	bfin_write32(DMA43_PREV_DESC_PTR, val)
+#define bfin_read_DMA43_CURR_ADDR() 		bfin_read32(DMA43_CURR_ADDR)
+#define bfin_write_DMA43_CURR_ADDR(val) 	bfin_write32(DMA43_CURR_ADDR, val)
+#define bfin_read_DMA43_IRQ_STATUS()		bfin_read32(DMA43_IRQ_STATUS)
+#define bfin_write_DMA43_IRQ_STATUS(val)	bfin_write32(DMA43_IRQ_STATUS, val)
+#define bfin_read_DMA43_CURR_X_COUNT()		bfin_read32(DMA43_CURR_X_COUNT)
+#define bfin_write_DMA43_CURR_X_COUNT(val)	bfin_write32(DMA43_CURR_X_COUNT, val)
+#define bfin_read_DMA43_CURR_Y_COUNT()		bfin_read32(DMA43_CURR_Y_COUNT)
+#define bfin_write_DMA43_CURR_Y_COUNT(val)	bfin_write32(DMA43_CURR_Y_COUNT, val)
+#define bfin_read_DMA43_BWL_COUNT()		bfin_read32(DMA43_BWL_COUNT)
+#define bfin_write_DMA43_BWL_COUNT(val)		bfin_write32(DMA43_BWL_COUNT, val)
+#define bfin_read_DMA43_CURR_BWL_COUNT()	bfin_read32(DMA43_CURR_BWL_COUNT)
+#define bfin_write_DMA43_CURR_BWL_COUNT(val)	bfin_write32(DMA43_CURR_BWL_COUNT, val)
+#define bfin_read_DMA43_BWM_COUNT()		bfin_read32(DMA43_BWM_COUNT)
+#define bfin_write_DMA43_BWM_COUNT(val)		bfin_write32(DMA43_BWM_COUNT, val)
+#define bfin_read_DMA43_CURR_BWM_COUNT()	bfin_read32(DMA43_CURR_BWM_COUNT)
+#define bfin_write_DMA43_CURR_BWM_COUNT(val)	bfin_write32(DMA43_CURR_BWM_COUNT, val)
+
+/* DMA Channel 44 Registers */
+
+#define bfin_read_DMA44_NEXT_DESC_PTR() 	bfin_read32(DMA44_NEXT_DESC_PTR)
+#define bfin_write_DMA44_NEXT_DESC_PTR(val) 	bfin_write32(DMA44_NEXT_DESC_PTR, val)
+#define bfin_read_DMA44_START_ADDR() 		bfin_read32(DMA44_START_ADDR)
+#define bfin_write_DMA44_START_ADDR(val) 	bfin_write32(DMA44_START_ADDR, val)
+#define bfin_read_DMA44_CONFIG()		bfin_read32(DMA44_CONFIG)
+#define bfin_write_DMA44_CONFIG(val)		bfin_write32(DMA44_CONFIG, val)
+#define bfin_read_DMA44_X_COUNT()		bfin_read32(DMA44_X_COUNT)
+#define bfin_write_DMA44_X_COUNT(val)		bfin_write32(DMA44_X_COUNT, val)
+#define bfin_read_DMA44_X_MODIFY()		bfin_read32(DMA44_X_MODIFY)
+#define bfin_write_DMA44_X_MODIFY(val) 		bfin_write32(DMA44_X_MODIFY, val)
+#define bfin_read_DMA44_Y_COUNT()		bfin_read32(DMA44_Y_COUNT)
+#define bfin_write_DMA44_Y_COUNT(val)		bfin_write32(DMA44_Y_COUNT, val)
+#define bfin_read_DMA44_Y_MODIFY()		bfin_read32(DMA44_Y_MODIFY)
+#define bfin_write_DMA44_Y_MODIFY(val) 		bfin_write32(DMA44_Y_MODIFY, val)
+#define bfin_read_DMA44_CURR_DESC_PTR() 	bfin_read32(DMA44_CURR_DESC_PTR)
+#define bfin_write_DMA44_CURR_DESC_PTR(val) 	bfin_write32(DMA44_CURR_DESC_PTR, val)
+#define bfin_read_DMA44_PREV_DESC_PTR() 	bfin_read32(DMA44_PREV_DESC_PTR)
+#define bfin_write_DMA44_PREV_DESC_PTR(val) 	bfin_write32(DMA44_PREV_DESC_PTR, val)
+#define bfin_read_DMA44_CURR_ADDR() 		bfin_read32(DMA44_CURR_ADDR)
+#define bfin_write_DMA44_CURR_ADDR(val) 	bfin_write32(DMA44_CURR_ADDR, val)
+#define bfin_read_DMA44_IRQ_STATUS()		bfin_read32(DMA44_IRQ_STATUS)
+#define bfin_write_DMA44_IRQ_STATUS(val)	bfin_write32(DMA44_IRQ_STATUS, val)
+#define bfin_read_DMA44_CURR_X_COUNT()		bfin_read32(DMA44_CURR_X_COUNT)
+#define bfin_write_DMA44_CURR_X_COUNT(val)	bfin_write32(DMA44_CURR_X_COUNT, val)
+#define bfin_read_DMA44_CURR_Y_COUNT()		bfin_read32(DMA44_CURR_Y_COUNT)
+#define bfin_write_DMA44_CURR_Y_COUNT(val)	bfin_write32(DMA44_CURR_Y_COUNT, val)
+#define bfin_read_DMA44_BWL_COUNT()		bfin_read32(DMA44_BWL_COUNT)
+#define bfin_write_DMA44_BWL_COUNT(val)		bfin_write32(DMA44_BWL_COUNT, val)
+#define bfin_read_DMA44_CURR_BWL_COUNT()	bfin_read32(DMA44_CURR_BWL_COUNT)
+#define bfin_write_DMA44_CURR_BWL_COUNT(val)	bfin_write32(DMA44_CURR_BWL_COUNT, val)
+#define bfin_read_DMA44_BWM_COUNT()		bfin_read32(DMA44_BWM_COUNT)
+#define bfin_write_DMA44_BWM_COUNT(val)		bfin_write32(DMA44_BWM_COUNT, val)
+#define bfin_read_DMA44_CURR_BWM_COUNT()	bfin_read32(DMA44_CURR_BWM_COUNT)
+#define bfin_write_DMA44_CURR_BWM_COUNT(val)	bfin_write32(DMA44_CURR_BWM_COUNT, val)
+
+/* DMA Channel 45 Registers */
+
+#define bfin_read_DMA45_NEXT_DESC_PTR() 	bfin_read32(DMA45_NEXT_DESC_PTR)
+#define bfin_write_DMA45_NEXT_DESC_PTR(val) 	bfin_write32(DMA45_NEXT_DESC_PTR, val)
+#define bfin_read_DMA45_START_ADDR() 		bfin_read32(DMA45_START_ADDR)
+#define bfin_write_DMA45_START_ADDR(val) 	bfin_write32(DMA45_START_ADDR, val)
+#define bfin_read_DMA45_CONFIG()		bfin_read32(DMA45_CONFIG)
+#define bfin_write_DMA45_CONFIG(val)		bfin_write32(DMA45_CONFIG, val)
+#define bfin_read_DMA45_X_COUNT()		bfin_read32(DMA45_X_COUNT)
+#define bfin_write_DMA45_X_COUNT(val)		bfin_write32(DMA45_X_COUNT, val)
+#define bfin_read_DMA45_X_MODIFY()		bfin_read32(DMA45_X_MODIFY)
+#define bfin_write_DMA45_X_MODIFY(val) 		bfin_write32(DMA45_X_MODIFY, val)
+#define bfin_read_DMA45_Y_COUNT()		bfin_read32(DMA45_Y_COUNT)
+#define bfin_write_DMA45_Y_COUNT(val)		bfin_write32(DMA45_Y_COUNT, val)
+#define bfin_read_DMA45_Y_MODIFY()		bfin_read32(DMA45_Y_MODIFY)
+#define bfin_write_DMA45_Y_MODIFY(val) 		bfin_write32(DMA45_Y_MODIFY, val)
+#define bfin_read_DMA45_CURR_DESC_PTR() 	bfin_read32(DMA45_CURR_DESC_PTR)
+#define bfin_write_DMA45_CURR_DESC_PTR(val) 	bfin_write32(DMA45_CURR_DESC_PTR, val)
+#define bfin_read_DMA45_PREV_DESC_PTR() 	bfin_read32(DMA45_PREV_DESC_PTR)
+#define bfin_write_DMA45_PREV_DESC_PTR(val) 	bfin_write32(DMA45_PREV_DESC_PTR, val)
+#define bfin_read_DMA45_CURR_ADDR() 		bfin_read32(DMA45_CURR_ADDR)
+#define bfin_write_DMA45_CURR_ADDR(val) 	bfin_write32(DMA45_CURR_ADDR, val)
+#define bfin_read_DMA45_IRQ_STATUS()		bfin_read32(DMA45_IRQ_STATUS)
+#define bfin_write_DMA45_IRQ_STATUS(val)	bfin_write32(DMA45_IRQ_STATUS, val)
+#define bfin_read_DMA45_CURR_X_COUNT()		bfin_read32(DMA45_CURR_X_COUNT)
+#define bfin_write_DMA45_CURR_X_COUNT(val)	bfin_write32(DMA45_CURR_X_COUNT, val)
+#define bfin_read_DMA45_CURR_Y_COUNT()		bfin_read32(DMA45_CURR_Y_COUNT)
+#define bfin_write_DMA45_CURR_Y_COUNT(val)	bfin_write32(DMA45_CURR_Y_COUNT, val)
+#define bfin_read_DMA45_BWL_COUNT()		bfin_read32(DMA45_BWL_COUNT)
+#define bfin_write_DMA45_BWL_COUNT(val)		bfin_write32(DMA45_BWL_COUNT, val)
+#define bfin_read_DMA45_CURR_BWL_COUNT()	bfin_read32(DMA45_CURR_BWL_COUNT)
+#define bfin_write_DMA45_CURR_BWL_COUNT(val)	bfin_write32(DMA45_CURR_BWL_COUNT, val)
+#define bfin_read_DMA45_BWM_COUNT()		bfin_read32(DMA45_BWM_COUNT)
+#define bfin_write_DMA45_BWM_COUNT(val)		bfin_write32(DMA45_BWM_COUNT, val)
+#define bfin_read_DMA45_CURR_BWM_COUNT()	bfin_read32(DMA45_CURR_BWM_COUNT)
+#define bfin_write_DMA45_CURR_BWM_COUNT(val)	bfin_write32(DMA45_CURR_BWM_COUNT, val)
+
+/* DMA Channel 46 Registers */
+
+#define bfin_read_DMA46_NEXT_DESC_PTR() 	bfin_read32(DMA46_NEXT_DESC_PTR)
+#define bfin_write_DMA46_NEXT_DESC_PTR(val) 	bfin_write32(DMA46_NEXT_DESC_PTR, val)
+#define bfin_read_DMA46_START_ADDR() 		bfin_read32(DMA46_START_ADDR)
+#define bfin_write_DMA46_START_ADDR(val) 	bfin_write32(DMA46_START_ADDR, val)
+#define bfin_read_DMA46_CONFIG()		bfin_read32(DMA46_CONFIG)
+#define bfin_write_DMA46_CONFIG(val)		bfin_write32(DMA46_CONFIG, val)
+#define bfin_read_DMA46_X_COUNT()		bfin_read32(DMA46_X_COUNT)
+#define bfin_write_DMA46_X_COUNT(val)		bfin_write32(DMA46_X_COUNT, val)
+#define bfin_read_DMA46_X_MODIFY()		bfin_read32(DMA46_X_MODIFY)
+#define bfin_write_DMA46_X_MODIFY(val) 		bfin_write32(DMA46_X_MODIFY, val)
+#define bfin_read_DMA46_Y_COUNT()		bfin_read32(DMA46_Y_COUNT)
+#define bfin_write_DMA46_Y_COUNT(val)		bfin_write32(DMA46_Y_COUNT, val)
+#define bfin_read_DMA46_Y_MODIFY()		bfin_read32(DMA46_Y_MODIFY)
+#define bfin_write_DMA46_Y_MODIFY(val) 		bfin_write32(DMA46_Y_MODIFY, val)
+#define bfin_read_DMA46_CURR_DESC_PTR() 	bfin_read32(DMA46_CURR_DESC_PTR)
+#define bfin_write_DMA46_CURR_DESC_PTR(val) 	bfin_write32(DMA46_CURR_DESC_PTR, val)
+#define bfin_read_DMA46_PREV_DESC_PTR() 	bfin_read32(DMA46_PREV_DESC_PTR)
+#define bfin_write_DMA46_PREV_DESC_PTR(val) 	bfin_write32(DMA46_PREV_DESC_PTR, val)
+#define bfin_read_DMA46_CURR_ADDR() 		bfin_read32(DMA46_CURR_ADDR)
+#define bfin_write_DMA46_CURR_ADDR(val) 	bfin_write32(DMA46_CURR_ADDR, val)
+#define bfin_read_DMA46_IRQ_STATUS()		bfin_read32(DMA46_IRQ_STATUS)
+#define bfin_write_DMA46_IRQ_STATUS(val)	bfin_write32(DMA46_IRQ_STATUS, val)
+#define bfin_read_DMA46_CURR_X_COUNT()		bfin_read32(DMA46_CURR_X_COUNT)
+#define bfin_write_DMA46_CURR_X_COUNT(val)	bfin_write32(DMA46_CURR_X_COUNT, val)
+#define bfin_read_DMA46_CURR_Y_COUNT()		bfin_read32(DMA46_CURR_Y_COUNT)
+#define bfin_write_DMA46_CURR_Y_COUNT(val)	bfin_write32(DMA46_CURR_Y_COUNT, val)
+#define bfin_read_DMA46_BWL_COUNT()		bfin_read32(DMA46_BWL_COUNT)
+#define bfin_write_DMA46_BWL_COUNT(val)		bfin_write32(DMA46_BWL_COUNT, val)
+#define bfin_read_DMA46_CURR_BWL_COUNT()	bfin_read32(DMA46_CURR_BWL_COUNT)
+#define bfin_write_DMA46_CURR_BWL_COUNT(val)	bfin_write32(DMA46_CURR_BWL_COUNT, val)
+#define bfin_read_DMA46_BWM_COUNT()		bfin_read32(DMA46_BWM_COUNT)
+#define bfin_write_DMA46_BWM_COUNT(val)		bfin_write32(DMA46_BWM_COUNT, val)
+#define bfin_read_DMA46_CURR_BWM_COUNT()	bfin_read32(DMA46_CURR_BWM_COUNT)
+#define bfin_write_DMA46_CURR_BWM_COUNT(val)	bfin_write32(DMA46_CURR_BWM_COUNT, val)
+
+
+/* EPPI1 Registers */
+
+
+/* Port Interrubfin_read_()t 0 Registers (32-bit) */
+
+#define bfin_read_PINT0_MASK_SET()		bfin_read32(PINT0_MASK_SET)
+#define bfin_write_PINT0_MASK_SET(val)		bfin_write32(PINT0_MASK_SET, val)
+#define bfin_read_PINT0_MASK_CLEAR()		bfin_read32(PINT0_MASK_CLEAR)
+#define bfin_write_PINT0_MASK_CLEAR(val)	bfin_write32(PINT0_MASK_CLEAR, val)
+#define bfin_read_PINT0_REQUEST()		bfin_read32(PINT0_REQUEST)
+#define bfin_write_PINT0_REQUEST(val)		bfin_write32(PINT0_REQUEST, val)
+#define bfin_read_PINT0_ASSIGN()		bfin_read32(PINT0_ASSIGN)
+#define bfin_write_PINT0_ASSIGN(val)		bfin_write32(PINT0_ASSIGN, val)
+#define bfin_read_PINT0_EDGE_SET()		bfin_read32(PINT0_EDGE_SET)
+#define bfin_write_PINT0_EDGE_SET(val)		bfin_write32(PINT0_EDGE_SET, val)
+#define bfin_read_PINT0_EDGE_CLEAR()		bfin_read32(PINT0_EDGE_CLEAR)
+#define bfin_write_PINT0_EDGE_CLEAR(val)	bfin_write32(PINT0_EDGE_CLEAR, val)
+#define bfin_read_PINT0_INVERT_SET()		bfin_read32(PINT0_INVERT_SET)
+#define bfin_write_PINT0_INVERT_SET(val)	bfin_write32(PINT0_INVERT_SET, val)
+#define bfin_read_PINT0_INVERT_CLEAR()		bfin_read32(PINT0_INVERT_CLEAR)
+#define bfin_write_PINT0_INVERT_CLEAR(val)	bfin_write32(PINT0_INVERT_CLEAR, val)
+#define bfin_read_PINT0_PINSTATE()		bfin_read32(PINT0_PINSTATE)
+#define bfin_write_PINT0_PINSTATE(val)		bfin_write32(PINT0_PINSTATE, val)
+#define bfin_read_PINT0_LATCH()			bfin_read32(PINT0_LATCH)
+#define bfin_write_PINT0_LATCH(val)		bfin_write32(PINT0_LATCH, val)
+
+/* Port Interrubfin_read_()t 1 Registers (32-bit) */
+
+#define bfin_read_PINT1_MASK_SET()		bfin_read32(PINT1_MASK_SET)
+#define bfin_write_PINT1_MASK_SET(val)		bfin_write32(PINT1_MASK_SET, val)
+#define bfin_read_PINT1_MASK_CLEAR()		bfin_read32(PINT1_MASK_CLEAR)
+#define bfin_write_PINT1_MASK_CLEAR(val)	bfin_write32(PINT1_MASK_CLEAR, val)
+#define bfin_read_PINT1_REQUEST()		bfin_read32(PINT1_REQUEST)
+#define bfin_write_PINT1_REQUEST(val)		bfin_write32(PINT1_REQUEST, val)
+#define bfin_read_PINT1_ASSIGN()		bfin_read32(PINT1_ASSIGN)
+#define bfin_write_PINT1_ASSIGN(val)		bfin_write32(PINT1_ASSIGN, val)
+#define bfin_read_PINT1_EDGE_SET()		bfin_read32(PINT1_EDGE_SET)
+#define bfin_write_PINT1_EDGE_SET(val)		bfin_write32(PINT1_EDGE_SET, val)
+#define bfin_read_PINT1_EDGE_CLEAR()		bfin_read32(PINT1_EDGE_CLEAR)
+#define bfin_write_PINT1_EDGE_CLEAR(val)	bfin_write32(PINT1_EDGE_CLEAR, val)
+#define bfin_read_PINT1_INVERT_SET()		bfin_read32(PINT1_INVERT_SET)
+#define bfin_write_PINT1_INVERT_SET(val)	bfin_write32(PINT1_INVERT_SET, val)
+#define bfin_read_PINT1_INVERT_CLEAR()		bfin_read32(PINT1_INVERT_CLEAR)
+#define bfin_write_PINT1_INVERT_CLEAR(val)	bfin_write32(PINT1_INVERT_CLEAR, val)
+#define bfin_read_PINT1_PINSTATE()		bfin_read32(PINT1_PINSTATE)
+#define bfin_write_PINT1_PINSTATE(val)		bfin_write32(PINT1_PINSTATE, val)
+#define bfin_read_PINT1_LATCH()			bfin_read32(PINT1_LATCH)
+#define bfin_write_PINT1_LATCH(val)		bfin_write32(PINT1_LATCH, val)
+
+/* Port Interrubfin_read_()t 2 Registers (32-bit) */
+
+#define bfin_read_PINT2_MASK_SET()		bfin_read32(PINT2_MASK_SET)
+#define bfin_write_PINT2_MASK_SET(val)		bfin_write32(PINT2_MASK_SET, val)
+#define bfin_read_PINT2_MASK_CLEAR()		bfin_read32(PINT2_MASK_CLEAR)
+#define bfin_write_PINT2_MASK_CLEAR(val)	bfin_write32(PINT2_MASK_CLEAR, val)
+#define bfin_read_PINT2_REQUEST()		bfin_read32(PINT2_REQUEST)
+#define bfin_write_PINT2_REQUEST(val)		bfin_write32(PINT2_REQUEST, val)
+#define bfin_read_PINT2_ASSIGN()		bfin_read32(PINT2_ASSIGN)
+#define bfin_write_PINT2_ASSIGN(val)		bfin_write32(PINT2_ASSIGN, val)
+#define bfin_read_PINT2_EDGE_SET()		bfin_read32(PINT2_EDGE_SET)
+#define bfin_write_PINT2_EDGE_SET(val)		bfin_write32(PINT2_EDGE_SET, val)
+#define bfin_read_PINT2_EDGE_CLEAR()		bfin_read32(PINT2_EDGE_CLEAR)
+#define bfin_write_PINT2_EDGE_CLEAR(val)	bfin_write32(PINT2_EDGE_CLEAR, val)
+#define bfin_read_PINT2_INVERT_SET()		bfin_read32(PINT2_INVERT_SET)
+#define bfin_write_PINT2_INVERT_SET(val)	bfin_write32(PINT2_INVERT_SET, val)
+#define bfin_read_PINT2_INVERT_CLEAR()		bfin_read32(PINT2_INVERT_CLEAR)
+#define bfin_write_PINT2_INVERT_CLEAR(val)	bfin_write32(PINT2_INVERT_CLEAR, val)
+#define bfin_read_PINT2_PINSTATE()		bfin_read32(PINT2_PINSTATE)
+#define bfin_write_PINT2_PINSTATE(val)		bfin_write32(PINT2_PINSTATE, val)
+#define bfin_read_PINT2_LATCH()			bfin_read32(PINT2_LATCH)
+#define bfin_write_PINT2_LATCH(val)		bfin_write32(PINT2_LATCH, val)
+
+/* Port Interrubfin_read_()t 3 Registers (32-bit) */
+
+#define bfin_read_PINT3_MASK_SET()		bfin_read32(PINT3_MASK_SET)
+#define bfin_write_PINT3_MASK_SET(val)		bfin_write32(PINT3_MASK_SET, val)
+#define bfin_read_PINT3_MASK_CLEAR()		bfin_read32(PINT3_MASK_CLEAR)
+#define bfin_write_PINT3_MASK_CLEAR(val)	bfin_write32(PINT3_MASK_CLEAR, val)
+#define bfin_read_PINT3_REQUEST()		bfin_read32(PINT3_REQUEST)
+#define bfin_write_PINT3_REQUEST(val)		bfin_write32(PINT3_REQUEST, val)
+#define bfin_read_PINT3_ASSIGN()		bfin_read32(PINT3_ASSIGN)
+#define bfin_write_PINT3_ASSIGN(val)		bfin_write32(PINT3_ASSIGN, val)
+#define bfin_read_PINT3_EDGE_SET()		bfin_read32(PINT3_EDGE_SET)
+#define bfin_write_PINT3_EDGE_SET(val)		bfin_write32(PINT3_EDGE_SET, val)
+#define bfin_read_PINT3_EDGE_CLEAR()		bfin_read32(PINT3_EDGE_CLEAR)
+#define bfin_write_PINT3_EDGE_CLEAR(val)	bfin_write32(PINT3_EDGE_CLEAR, val)
+#define bfin_read_PINT3_INVERT_SET()		bfin_read32(PINT3_INVERT_SET)
+#define bfin_write_PINT3_INVERT_SET(val)	bfin_write32(PINT3_INVERT_SET, val)
+#define bfin_read_PINT3_INVERT_CLEAR()		bfin_read32(PINT3_INVERT_CLEAR)
+#define bfin_write_PINT3_INVERT_CLEAR(val)	bfin_write32(PINT3_INVERT_CLEAR, val)
+#define bfin_read_PINT3_PINSTATE()		bfin_read32(PINT3_PINSTATE)
+#define bfin_write_PINT3_PINSTATE(val)		bfin_write32(PINT3_PINSTATE, val)
+#define bfin_read_PINT3_LATCH()			bfin_read32(PINT3_LATCH)
+#define bfin_write_PINT3_LATCH(val)		bfin_write32(PINT3_LATCH, val)
+
+/* Port Interrubfin_read_()t 4 Registers (32-bit) */
+
+#define bfin_read_PINT4_MASK_SET()		bfin_read32(PINT4_MASK_SET)
+#define bfin_write_PINT4_MASK_SET(val)		bfin_write32(PINT4_MASK_SET, val)
+#define bfin_read_PINT4_MASK_CLEAR()		bfin_read32(PINT4_MASK_CLEAR)
+#define bfin_write_PINT4_MASK_CLEAR(val)	bfin_write32(PINT4_MASK_CLEAR, val)
+#define bfin_read_PINT4_REQUEST()		bfin_read32(PINT4_REQUEST)
+#define bfin_write_PINT4_REQUEST(val)		bfin_write32(PINT4_REQUEST, val)
+#define bfin_read_PINT4_ASSIGN()		bfin_read32(PINT4_ASSIGN)
+#define bfin_write_PINT4_ASSIGN(val)		bfin_write32(PINT4_ASSIGN, val)
+#define bfin_read_PINT4_EDGE_SET()		bfin_read32(PINT4_EDGE_SET)
+#define bfin_write_PINT4_EDGE_SET(val)		bfin_write32(PINT4_EDGE_SET, val)
+#define bfin_read_PINT4_EDGE_CLEAR()		bfin_read32(PINT4_EDGE_CLEAR)
+#define bfin_write_PINT4_EDGE_CLEAR(val)	bfin_write32(PINT4_EDGE_CLEAR, val)
+#define bfin_read_PINT4_INVERT_SET()		bfin_read32(PINT4_INVERT_SET)
+#define bfin_write_PINT4_INVERT_SET(val)	bfin_write32(PINT4_INVERT_SET, val)
+#define bfin_read_PINT4_INVERT_CLEAR()		bfin_read32(PINT4_INVERT_CLEAR)
+#define bfin_write_PINT4_INVERT_CLEAR(val)	bfin_write32(PINT4_INVERT_CLEAR, val)
+#define bfin_read_PINT4_PINSTATE()		bfin_read32(PINT4_PINSTATE)
+#define bfin_write_PINT4_PINSTATE(val)		bfin_write32(PINT4_PINSTATE, val)
+#define bfin_read_PINT4_LATCH()			bfin_read32(PINT4_LATCH)
+#define bfin_write_PINT4_LATCH(val)		bfin_write32(PINT4_LATCH, val)
+
+/* Port Interrubfin_read_()t 5 Registers (32-bit) */
+
+#define bfin_read_PINT5_MASK_SET()		bfin_read32(PINT5_MASK_SET)
+#define bfin_write_PINT5_MASK_SET(val)		bfin_write32(PINT5_MASK_SET, val)
+#define bfin_read_PINT5_MASK_CLEAR()		bfin_read32(PINT5_MASK_CLEAR)
+#define bfin_write_PINT5_MASK_CLEAR(val)	bfin_write32(PINT5_MASK_CLEAR, val)
+#define bfin_read_PINT5_REQUEST()		bfin_read32(PINT5_REQUEST)
+#define bfin_write_PINT5_REQUEST(val)		bfin_write32(PINT5_REQUEST, val)
+#define bfin_read_PINT5_ASSIGN()		bfin_read32(PINT5_ASSIGN)
+#define bfin_write_PINT5_ASSIGN(val)		bfin_write32(PINT5_ASSIGN, val)
+#define bfin_read_PINT5_EDGE_SET()		bfin_read32(PINT5_EDGE_SET)
+#define bfin_write_PINT5_EDGE_SET(val)		bfin_write32(PINT5_EDGE_SET, val)
+#define bfin_read_PINT5_EDGE_CLEAR()		bfin_read32(PINT5_EDGE_CLEAR)
+#define bfin_write_PINT5_EDGE_CLEAR(val)	bfin_write32(PINT5_EDGE_CLEAR, val)
+#define bfin_read_PINT5_INVERT_SET()		bfin_read32(PINT5_INVERT_SET)
+#define bfin_write_PINT5_INVERT_SET(val)	bfin_write32(PINT5_INVERT_SET, val)
+#define bfin_read_PINT5_INVERT_CLEAR()		bfin_read32(PINT5_INVERT_CLEAR)
+#define bfin_write_PINT5_INVERT_CLEAR(val)	bfin_write32(PINT5_INVERT_CLEAR, val)
+#define bfin_read_PINT5_PINSTATE()		bfin_read32(PINT5_PINSTATE)
+#define bfin_write_PINT5_PINSTATE(val)		bfin_write32(PINT5_PINSTATE, val)
+#define bfin_read_PINT5_LATCH()			bfin_read32(PINT5_LATCH)
+#define bfin_write_PINT5_LATCH(val)		bfin_write32(PINT5_LATCH, val)
+
+/* Port A Registers */
+
+#define bfin_read_PORTA_FER()		bfin_read32(PORTA_FER)
+#define bfin_write_PORTA_FER(val)	bfin_write32(PORTA_FER, val)
+#define bfin_read_PORTA_FER_SET()	bfin_read32(PORTA_FER_SET)
+#define bfin_write_PORTA_FER_SET(val)	bfin_write32(PORTA_FER_SET, val)
+#define bfin_read_PORTA_FER_CLEAR()	bfin_read32(PORTA_FER_CLEAR)
+#define bfin_write_PORTA_FER_CLEAR(val)	bfin_write32(PORTA_FER_CLEAR, val)
+#define bfin_read_PORTA()		bfin_read32(PORTA)
+#define bfin_write_PORTA(val)		bfin_write32(PORTA, val)
+#define bfin_read_PORTA_SET()		bfin_read32(PORTA_SET)
+#define bfin_write_PORTA_SET(val)	bfin_write32(PORTA_SET, val)
+#define bfin_read_PORTA_CLEAR()		bfin_read32(PORTA_CLEAR)
+#define bfin_write_PORTA_CLEAR(val)	bfin_write32(PORTA_CLEAR, val)
+#define bfin_read_PORTA_DIR()		bfin_read32(PORTA_DIR)
+#define bfin_write_PORTA_DIR(val)	bfin_write32(PORTA_DIR, val)
+#define bfin_read_PORTA_DIR_SET()	bfin_read32(PORTA_DIR_SET)
+#define bfin_write_PORTA_DIR_SET(val)	bfin_write32(PORTA_DIR_SET, val)
+#define bfin_read_PORTA_DIR_CLEAR()	bfin_read32(PORTA_DIR_CLEAR)
+#define bfin_write_PORTA_DIR_CLEAR(val)	bfin_write32(PORTA_DIR_CLEAR, val)
+#define bfin_read_PORTA_INEN()		bfin_read32(PORTA_INEN)
+#define bfin_write_PORTA_INEN(val)	bfin_write32(PORTA_INEN, val)
+#define bfin_read_PORTA_INEN_SET()	bfin_read32(PORTA_INEN_SET)
+#define bfin_write_PORTA_INEN_SET(val)	bfin_write32(PORTA_INEN_SET, val)
+#define bfin_read_PORTA_INEN_CLEAR()	bfin_read32(PORTA_INEN_CLEAR)
+#define bfin_write_PORTA_INEN_CLEAR(val)	bfin_write32(PORTA_INEN_CLEAR, val)
+#define bfin_read_PORTA_MUX()		bfin_read32(PORTA_MUX)
+#define bfin_write_PORTA_MUX(val)	bfin_write32(PORTA_MUX, val)
+#define bfin_read_PORTA_DATA_TGL()	bfin_read32(PORTA_DATA_TGL)
+#define bfin_write_PORTA_DATA_TGL(val)	bfin_write32(PORTA_DATA_TGL, val)
+#define bfin_read_PORTA_POL()		bfin_read32(PORTA_POL)
+#define bfin_write_PORTA_POL(val)	bfin_write32(PORTA_POL, val)
+#define bfin_read_PORTA_POL_SET()	bfin_read32(PORTA_POL_SET)
+#define bfin_write_PORTA_POL_SET(val)	bfin_write32(PORTA_POL_SET, val)
+#define bfin_read_PORTA_POL_CLEAR()	bfin_read32(PORTA_POL_CLEAR)
+#define bfin_write_PORTA_POL_CLEAR(val)	bfin_write32(PORTA_POL_CLEAR, val)
+#define bfin_read_PORTA_LOCK()		bfin_read32(PORTA_LOCK)
+#define bfin_write_PORTA_LOCK(val)	bfin_write32(PORTA_LOCK, val)
+#define bfin_read_PORTA_REVID()		bfin_read32(PORTA_REVID)
+#define bfin_write_PORTA_REVID(val)	bfin_write32(PORTA_REVID, val)
+
+
+
+/* Port B Registers */
+#define bfin_read_PORTB_FER()		bfin_read32(PORTB_FER)
+#define bfin_write_PORTB_FER(val)	bfin_write32(PORTB_FER, val)
+#define bfin_read_PORTB_FER_SET()	bfin_read32(PORTB_FER_SET)
+#define bfin_write_PORTB_FER_SET(val)	bfin_write32(PORTB_FER_SET, val)
+#define bfin_read_PORTB_FER_CLEAR()	bfin_read32(PORTB_FER_CLEAR)
+#define bfin_write_PORTB_FER_CLEAR(val)	bfin_write32(PORTB_FER_CLEAR, val)
+#define bfin_read_PORTB()		bfin_read32(PORTB)
+#define bfin_write_PORTB(val)		bfin_write32(PORTB, val)
+#define bfin_read_PORTB_SET()		bfin_read32(PORTB_SET)
+#define bfin_write_PORTB_SET(val)	bfin_write32(PORTB_SET, val)
+#define bfin_read_PORTB_CLEAR()		bfin_read32(PORTB_CLEAR)
+#define bfin_write_PORTB_CLEAR(val)	bfin_write32(PORTB_CLEAR, val)
+#define bfin_read_PORTB_DIR()		bfin_read32(PORTB_DIR)
+#define bfin_write_PORTB_DIR(val)	bfin_write32(PORTB_DIR, val)
+#define bfin_read_PORTB_DIR_SET()	bfin_read32(PORTB_DIR_SET)
+#define bfin_write_PORTB_DIR_SET(val)	bfin_write32(PORTB_DIR_SET, val)
+#define bfin_read_PORTB_DIR_CLEAR()	bfin_read32(PORTB_DIR_CLEAR)
+#define bfin_write_PORTB_DIR_CLEAR(val)	bfin_write32(PORTB_DIR_CLEAR, val)
+#define bfin_read_PORTB_INEN()		bfin_read32(PORTB_INEN)
+#define bfin_write_PORTB_INEN(val)	bfin_write32(PORTB_INEN, val)
+#define bfin_read_PORTB_INEN_SET()	bfin_read32(PORTB_INEN_SET)
+#define bfin_write_PORTB_INEN_SET(val)	bfin_write32(PORTB_INEN_SET, val)
+#define bfin_read_PORTB_INEN_CLEAR()	bfin_read32(PORTB_INEN_CLEAR)
+#define bfin_write_PORTB_INEN_CLEAR(val)	bfin_write32(PORTB_INEN_CLEAR, val)
+#define bfin_read_PORTB_MUX()		bfin_read32(PORTB_MUX)
+#define bfin_write_PORTB_MUX(val)	bfin_write32(PORTB_MUX, val)
+#define bfin_read_PORTB_DATA_TGL()	bfin_read32(PORTB_DATA_TGL)
+#define bfin_write_PORTB_DATA_TGL(val)	bfin_write32(PORTB_DATA_TGL, val)
+#define bfin_read_PORTB_POL()		bfin_read32(PORTB_POL)
+#define bfin_write_PORTB_POL(val)	bfin_write32(PORTB_POL, val)
+#define bfin_read_PORTB_POL_SET()	bfin_read32(PORTB_POL_SET)
+#define bfin_write_PORTB_POL_SET(val)	bfin_write32(PORTB_POL_SET, val)
+#define bfin_read_PORTB_POL_CLEAR()	bfin_read32(PORTB_POL_CLEAR)
+#define bfin_write_PORTB_POL_CLEAR(val)	bfin_write32(PORTB_POL_CLEAR, val)
+#define bfin_read_PORTB_LOCK()		bfin_read32(PORTB_LOCK)
+#define bfin_write_PORTB_LOCK(val)	bfin_write32(PORTB_LOCK, val)
+#define bfin_read_PORTB_REVID()		bfin_read32(PORTB_REVID)
+#define bfin_write_PORTB_REVID(val)	bfin_write32(PORTB_REVID, val)
+
+
+/* Port C Registers */
+#define bfin_read_PORTC_FER()		bfin_read32(PORTC_FER)
+#define bfin_write_PORTC_FER(val)	bfin_write32(PORTC_FER, val)
+#define bfin_read_PORTC_FER_SET()	bfin_read32(PORTC_FER_SET)
+#define bfin_write_PORTC_FER_SET(val)	bfin_write32(PORTC_FER_SET, val)
+#define bfin_read_PORTC_FER_CLEAR()	bfin_read32(PORTC_FER_CLEAR)
+#define bfin_write_PORTC_FER_CLEAR(val)	bfin_write32(PORTC_FER_CLEAR, val)
+#define bfin_read_PORTC()		bfin_read32(PORTC)
+#define bfin_write_PORTC(val)		bfin_write32(PORTC, val)
+#define bfin_read_PORTC_SET()		bfin_read32(PORTC_SET)
+#define bfin_write_PORTC_SET(val)	bfin_write32(PORTC_SET, val)
+#define bfin_read_PORTC_CLEAR()		bfin_read32(PORTC_CLEAR)
+#define bfin_write_PORTC_CLEAR(val)	bfin_write32(PORTC_CLEAR, val)
+#define bfin_read_PORTC_DIR()		bfin_read32(PORTC_DIR)
+#define bfin_write_PORTC_DIR(val)	bfin_write32(PORTC_DIR, val)
+#define bfin_read_PORTC_DIR_SET()	bfin_read32(PORTC_DIR_SET)
+#define bfin_write_PORTC_DIR_SET(val)	bfin_write32(PORTC_DIR_SET, val)
+#define bfin_read_PORTC_DIR_CLEAR()	bfin_read32(PORTC_DIR_CLEAR)
+#define bfin_write_PORTC_DIR_CLEAR(val)	bfin_write32(PORTC_DIR_CLEAR, val)
+#define bfin_read_PORTC_INEN()		bfin_read32(PORTC_INEN)
+#define bfin_write_PORTC_INEN(val)	bfin_write32(PORTC_INEN, val)
+#define bfin_read_PORTC_INEN_SET()	bfin_read32(PORTC_INEN_SET)
+#define bfin_write_PORTC_INEN_SET(val)	bfin_write32(PORTC_INEN_SET, val)
+#define bfin_read_PORTC_INEN_CLEAR()	bfin_read32(PORTC_INEN_CLEAR)
+#define bfin_write_PORTC_INEN_CLEAR(val)	bfin_write32(PORTC_INEN_CLEAR, val)
+#define bfin_read_PORTC_MUX()		bfin_read32(PORTC_MUX)
+#define bfin_write_PORTC_MUX(val)	bfin_write32(PORTC_MUX, val)
+#define bfin_read_PORTC_DATA_TGL()	bfin_read32(PORTC_DATA_TGL)
+#define bfin_write_PORTC_DATA_TGL(val)	bfin_write32(PORTC_DATA_TGL, val)
+#define bfin_read_PORTC_POL()		bfin_read32(PORTC_POL)
+#define bfin_write_PORTC_POL(val)	bfin_write32(PORTC_POL, val)
+#define bfin_read_PORTC_POL_SET()	bfin_read32(PORTC_POL_SET)
+#define bfin_write_PORTC_POL_SET(val)	bfin_write32(PORTC_POL_SET, val)
+#define bfin_read_PORTC_POL_CLEAR()	bfin_read32(PORTC_POL_CLEAR)
+#define bfin_write_PORTC_POL_CLEAR(val)	bfin_write32(PORTC_POL_CLEAR, val)
+#define bfin_read_PORTC_LOCK()		bfin_read32(PORTC_LOCK)
+#define bfin_write_PORTC_LOCK(val)	bfin_write32(PORTC_LOCK, val)
+#define bfin_read_PORTC_REVID()		bfin_read32(PORTC_REVID)
+#define bfin_write_PORTC_REVID(val)	bfin_write32(PORTC_REVID, val)
+
+
+/* Port D Registers */
+#define bfin_read_PORTD_FER()		bfin_read32(PORTD_FER)
+#define bfin_write_PORTD_FER(val)	bfin_write32(PORTD_FER, val)
+#define bfin_read_PORTD_FER_SET()	bfin_read32(PORTD_FER_SET)
+#define bfin_write_PORTD_FER_SET(val)	bfin_write32(PORTD_FER_SET, val)
+#define bfin_read_PORTD_FER_CLEAR()	bfin_read32(PORTD_FER_CLEAR)
+#define bfin_write_PORTD_FER_CLEAR(val)	bfin_write32(PORTD_FER_CLEAR, val)
+#define bfin_read_PORTD()		bfin_read32(PORTD)
+#define bfin_write_PORTD(val)		bfin_write32(PORTD, val)
+#define bfin_read_PORTD_SET()		bfin_read32(PORTD_SET)
+#define bfin_write_PORTD_SET(val)	bfin_write32(PORTD_SET, val)
+#define bfin_read_PORTD_CLEAR()		bfin_read32(PORTD_CLEAR)
+#define bfin_write_PORTD_CLEAR(val)	bfin_write32(PORTD_CLEAR, val)
+#define bfin_read_PORTD_DIR()		bfin_read32(PORTD_DIR)
+#define bfin_write_PORTD_DIR(val)	bfin_write32(PORTD_DIR, val)
+#define bfin_read_PORTD_DIR_SET()	bfin_read32(PORTD_DIR_SET)
+#define bfin_write_PORTD_DIR_SET(val)	bfin_write32(PORTD_DIR_SET, val)
+#define bfin_read_PORTD_DIR_CLEAR()	bfin_read32(PORTD_DIR_CLEAR)
+#define bfin_write_PORTD_DIR_CLEAR(val)	bfin_write32(PORTD_DIR_CLEAR, val)
+#define bfin_read_PORTD_INEN()		bfin_read32(PORTD_INEN)
+#define bfin_write_PORTD_INEN(val)	bfin_write32(PORTD_INEN, val)
+#define bfin_read_PORTD_INEN_SET()	bfin_read32(PORTD_INEN_SET)
+#define bfin_write_PORTD_INEN_SET(val)	bfin_write32(PORTD_INEN_SET, val)
+#define bfin_read_PORTD_INEN_CLEAR()	bfin_read32(PORTD_INEN_CLEAR)
+#define bfin_write_PORTD_INEN_CLEAR(val)	bfin_write32(PORTD_INEN_CLEAR, val)
+#define bfin_read_PORTD_MUX()		bfin_read32(PORTD_MUX)
+#define bfin_write_PORTD_MUX(val)	bfin_write32(PORTD_MUX, val)
+#define bfin_read_PORTD_DATA_TGL()	bfin_read32(PORTD_DATA_TGL)
+#define bfin_write_PORTD_DATA_TGL(val)	bfin_write32(PORTD_DATA_TGL, val)
+#define bfin_read_PORTD_POL()		bfin_read32(PORTD_POL)
+#define bfin_write_PORTD_POL(val)	bfin_write32(PORTD_POL, val)
+#define bfin_read_PORTD_POL_SET()	bfin_read32(PORTD_POL_SET)
+#define bfin_write_PORTD_POL_SET(val)	bfin_write32(PORTD_POL_SET, val)
+#define bfin_read_PORTD_POL_CLEAR()	bfin_read32(PORTD_POL_CLEAR)
+#define bfin_write_PORTD_POL_CLEAR(val)	bfin_write32(PORTD_POL_CLEAR, val)
+#define bfin_read_PORTD_LOCK()		bfin_read32(PORTD_LOCK)
+#define bfin_write_PORTD_LOCK(val)	bfin_write32(PORTD_LOCK, val)
+#define bfin_read_PORTD_REVID()		bfin_read32(PORTD_REVID)
+#define bfin_write_PORTD_REVID(val)	bfin_write32(PORTD_REVID, val)
+
+
+/* Port E Registers */
+#define bfin_read_PORTE_FER()		bfin_read32(PORTE_FER)
+#define bfin_write_PORTE_FER(val)	bfin_write32(PORTE_FER, val)
+#define bfin_read_PORTE_FER_SET()	bfin_read32(PORTE_FER_SET)
+#define bfin_write_PORTE_FER_SET(val)	bfin_write32(PORTE_FER_SET, val)
+#define bfin_read_PORTE_FER_CLEAR()	bfin_read32(PORTE_FER_CLEAR)
+#define bfin_write_PORTE_FER_CLEAR(val)	bfin_write32(PORTE_FER_CLEAR, val)
+#define bfin_read_PORTE()		bfin_read32(PORTE)
+#define bfin_write_PORTE(val)		bfin_write32(PORTE, val)
+#define bfin_read_PORTE_SET()		bfin_read32(PORTE_SET)
+#define bfin_write_PORTE_SET(val)	bfin_write32(PORTE_SET, val)
+#define bfin_read_PORTE_CLEAR()		bfin_read32(PORTE_CLEAR)
+#define bfin_write_PORTE_CLEAR(val)	bfin_write32(PORTE_CLEAR, val)
+#define bfin_read_PORTE_DIR()		bfin_read32(PORTE_DIR)
+#define bfin_write_PORTE_DIR(val)	bfin_write32(PORTE_DIR, val)
+#define bfin_read_PORTE_DIR_SET()	bfin_read32(PORTE_DIR_SET)
+#define bfin_write_PORTE_DIR_SET(val)	bfin_write32(PORTE_DIR_SET, val)
+#define bfin_read_PORTE_DIR_CLEAR()	bfin_read32(PORTE_DIR_CLEAR)
+#define bfin_write_PORTE_DIR_CLEAR(val)	bfin_write32(PORTE_DIR_CLEAR, val)
+#define bfin_read_PORTE_INEN()		bfin_read32(PORTE_INEN)
+#define bfin_write_PORTE_INEN(val)	bfin_write32(PORTE_INEN, val)
+#define bfin_read_PORTE_INEN_SET()	bfin_read32(PORTE_INEN_SET)
+#define bfin_write_PORTE_INEN_SET(val)	bfin_write32(PORTE_INEN_SET, val)
+#define bfin_read_PORTE_INEN_CLEAR()	bfin_read32(PORTE_INEN_CLEAR)
+#define bfin_write_PORTE_INEN_CLEAR(val)	bfin_write32(PORTE_INEN_CLEAR, val)
+#define bfin_read_PORTE_MUX()		bfin_read32(PORTE_MUX)
+#define bfin_write_PORTE_MUX(val)	bfin_write32(PORTE_MUX, val)
+#define bfin_read_PORTE_DATA_TGL()	bfin_read32(PORTE_DATA_TGL)
+#define bfin_write_PORTE_DATA_TGL(val)	bfin_write32(PORTE_DATA_TGL, val)
+#define bfin_read_PORTE_POL()		bfin_read32(PORTE_POL)
+#define bfin_write_PORTE_POL(val)	bfin_write32(PORTE_POL, val)
+#define bfin_read_PORTE_POL_SET()	bfin_read32(PORTE_POL_SET)
+#define bfin_write_PORTE_POL_SET(val)	bfin_write32(PORTE_POL_SET, val)
+#define bfin_read_PORTE_POL_CLEAR()	bfin_read32(PORTE_POL_CLEAR)
+#define bfin_write_PORTE_POL_CLEAR(val)	bfin_write32(PORTE_POL_CLEAR, val)
+#define bfin_read_PORTE_LOCK()		bfin_read32(PORTE_LOCK)
+#define bfin_write_PORTE_LOCK(val)	bfin_write32(PORTE_LOCK, val)
+#define bfin_read_PORTE_REVID()		bfin_read32(PORTE_REVID)
+#define bfin_write_PORTE_REVID(val)	bfin_write32(PORTE_REVID, val)
+
+
+/* Port F Registers */
+#define bfin_read_PORTF_FER()		bfin_read32(PORTF_FER)
+#define bfin_write_PORTF_FER(val)	bfin_write32(PORTF_FER, val)
+#define bfin_read_PORTF_FER_SET()	bfin_read32(PORTF_FER_SET)
+#define bfin_write_PORTF_FER_SET(val)	bfin_write32(PORTF_FER_SET, val)
+#define bfin_read_PORTF_FER_CLEAR()	bfin_read32(PORTF_FER_CLEAR)
+#define bfin_write_PORTF_FER_CLEAR(val)	bfin_write32(PORTF_FER_CLEAR, val)
+#define bfin_read_PORTF()		bfin_read32(PORTF)
+#define bfin_write_PORTF(val)		bfin_write32(PORTF, val)
+#define bfin_read_PORTF_SET()		bfin_read32(PORTF_SET)
+#define bfin_write_PORTF_SET(val)	bfin_write32(PORTF_SET, val)
+#define bfin_read_PORTF_CLEAR()		bfin_read32(PORTF_CLEAR)
+#define bfin_write_PORTF_CLEAR(val)	bfin_write32(PORTF_CLEAR, val)
+#define bfin_read_PORTF_DIR()		bfin_read32(PORTF_DIR)
+#define bfin_write_PORTF_DIR(val)	bfin_write32(PORTF_DIR, val)
+#define bfin_read_PORTF_DIR_SET()	bfin_read32(PORTF_DIR_SET)
+#define bfin_write_PORTF_DIR_SET(val)	bfin_write32(PORTF_DIR_SET, val)
+#define bfin_read_PORTF_DIR_CLEAR()	bfin_read32(PORTF_DIR_CLEAR)
+#define bfin_write_PORTF_DIR_CLEAR(val)	bfin_write32(PORTF_DIR_CLEAR, val)
+#define bfin_read_PORTF_INEN()		bfin_read32(PORTF_INEN)
+#define bfin_write_PORTF_INEN(val)	bfin_write32(PORTF_INEN, val)
+#define bfin_read_PORTF_INEN_SET()	bfin_read32(PORTF_INEN_SET)
+#define bfin_write_PORTF_INEN_SET(val)	bfin_write32(PORTF_INEN_SET, val)
+#define bfin_read_PORTF_INEN_CLEAR()	bfin_read32(PORTF_INEN_CLEAR)
+#define bfin_write_PORTF_INEN_CLEAR(val)	bfin_write32(PORTF_INEN_CLEAR, val)
+#define bfin_read_PORTF_MUX()		bfin_read32(PORTF_MUX)
+#define bfin_write_PORTF_MUX(val)	bfin_write32(PORTF_MUX, val)
+#define bfin_read_PORTF_DATA_TGL()	bfin_read32(PORTF_DATA_TGL)
+#define bfin_write_PORTF_DATA_TGL(val)	bfin_write32(PORTF_DATA_TGL, val)
+#define bfin_read_PORTF_POL()		bfin_read32(PORTF_POL)
+#define bfin_write_PORTF_POL(val)	bfin_write32(PORTF_POL, val)
+#define bfin_read_PORTF_POL_SET()	bfin_read32(PORTF_POL_SET)
+#define bfin_write_PORTF_POL_SET(val)	bfin_write32(PORTF_POL_SET, val)
+#define bfin_read_PORTF_POL_CLEAR()	bfin_read32(PORTF_POL_CLEAR)
+#define bfin_write_PORTF_POL_CLEAR(val)	bfin_write32(PORTF_POL_CLEAR, val)
+#define bfin_read_PORTF_LOCK()		bfin_read32(PORTF_LOCK)
+#define bfin_write_PORTF_LOCK(val)	bfin_write32(PORTF_LOCK, val)
+#define bfin_read_PORTF_REVID()		bfin_read32(PORTF_REVID)
+#define bfin_write_PORTF_REVID(val)	bfin_write32(PORTF_REVID, val)
+
+
+/* Port G Registers */
+#define bfin_read_PORTG_FER()		bfin_read32(PORTG_FER)
+#define bfin_write_PORTG_FER(val)	bfin_write32(PORTG_FER, val)
+#define bfin_read_PORTG_FER_SET()	bfin_read32(PORTG_FER_SET)
+#define bfin_write_PORTG_FER_SET(val)	bfin_write32(PORTG_FER_SET, val)
+#define bfin_read_PORTG_FER_CLEAR()	bfin_read32(PORTG_FER_CLEAR)
+#define bfin_write_PORTG_FER_CLEAR(val)	bfin_write32(PORTG_FER_CLEAR, val)
+#define bfin_read_PORTG()		bfin_read32(PORTG)
+#define bfin_write_PORTG(val)		bfin_write32(PORTG, val)
+#define bfin_read_PORTG_SET()		bfin_read32(PORTG_SET)
+#define bfin_write_PORTG_SET(val)	bfin_write32(PORTG_SET, val)
+#define bfin_read_PORTG_CLEAR()		bfin_read32(PORTG_CLEAR)
+#define bfin_write_PORTG_CLEAR(val)	bfin_write32(PORTG_CLEAR, val)
+#define bfin_read_PORTG_DIR()		bfin_read32(PORTG_DIR)
+#define bfin_write_PORTG_DIR(val)	bfin_write32(PORTG_DIR, val)
+#define bfin_read_PORTG_DIR_SET()	bfin_read32(PORTG_DIR_SET)
+#define bfin_write_PORTG_DIR_SET(val)	bfin_write32(PORTG_DIR_SET, val)
+#define bfin_read_PORTG_DIR_CLEAR()	bfin_read32(PORTG_DIR_CLEAR)
+#define bfin_write_PORTG_DIR_CLEAR(val)	bfin_write32(PORTG_DIR_CLEAR, val)
+#define bfin_read_PORTG_INEN()		bfin_read32(PORTG_INEN)
+#define bfin_write_PORTG_INEN(val)	bfin_write32(PORTG_INEN, val)
+#define bfin_read_PORTG_INEN_SET()	bfin_read32(PORTG_INEN_SET)
+#define bfin_write_PORTG_INEN_SET(val)	bfin_write32(PORTG_INEN_SET, val)
+#define bfin_read_PORTG_INEN_CLEAR()	bfin_read32(PORTG_INEN_CLEAR)
+#define bfin_write_PORTG_INEN_CLEAR(val)	bfin_write32(PORTG_INEN_CLEAR, val)
+#define bfin_read_PORTG_MUX()		bfin_read32(PORTG_MUX)
+#define bfin_write_PORTG_MUX(val)	bfin_write32(PORTG_MUX, val)
+#define bfin_read_PORTG_DATA_TGL()	bfin_read32(PORTG_DATA_TGL)
+#define bfin_write_PORTG_DATA_TGL(val)	bfin_write32(PORTG_DATA_TGL, val)
+#define bfin_read_PORTG_POL()		bfin_read32(PORTG_POL)
+#define bfin_write_PORTG_POL(val)	bfin_write32(PORTG_POL, val)
+#define bfin_read_PORTG_POL_SET()	bfin_read32(PORTG_POL_SET)
+#define bfin_write_PORTG_POL_SET(val)	bfin_write32(PORTG_POL_SET, val)
+#define bfin_read_PORTG_POL_CLEAR()	bfin_read32(PORTG_POL_CLEAR)
+#define bfin_write_PORTG_POL_CLEAR(val)	bfin_write32(PORTG_POL_CLEAR, val)
+#define bfin_read_PORTG_LOCK()		bfin_read32(PORTG_LOCK)
+#define bfin_write_PORTG_LOCK(val)	bfin_write32(PORTG_LOCK, val)
+#define bfin_read_PORTG_REVID()		bfin_read32(PORTG_REVID)
+#define bfin_write_PORTG_REVID(val)	bfin_write32(PORTG_REVID, val)
+
+
+
+
+/* CAN Controller 0 Config 1 Registers */
+
+#define bfin_read_CAN0_MC1()		bfin_read16(CAN0_MC1)
+#define bfin_write_CAN0_MC1(val)	bfin_write16(CAN0_MC1, val)
+#define bfin_read_CAN0_MD1()		bfin_read16(CAN0_MD1)
+#define bfin_write_CAN0_MD1(val)	bfin_write16(CAN0_MD1, val)
+#define bfin_read_CAN0_TRS1()		bfin_read16(CAN0_TRS1)
+#define bfin_write_CAN0_TRS1(val)	bfin_write16(CAN0_TRS1, val)
+#define bfin_read_CAN0_TRR1()		bfin_read16(CAN0_TRR1)
+#define bfin_write_CAN0_TRR1(val)	bfin_write16(CAN0_TRR1, val)
+#define bfin_read_CAN0_TA1()		bfin_read16(CAN0_TA1)
+#define bfin_write_CAN0_TA1(val)	bfin_write16(CAN0_TA1, val)
+#define bfin_read_CAN0_AA1()		bfin_read16(CAN0_AA1)
+#define bfin_write_CAN0_AA1(val)	bfin_write16(CAN0_AA1, val)
+#define bfin_read_CAN0_RMP1()		bfin_read16(CAN0_RMP1)
+#define bfin_write_CAN0_RMP1(val)	bfin_write16(CAN0_RMP1, val)
+#define bfin_read_CAN0_RML1()		bfin_read16(CAN0_RML1)
+#define bfin_write_CAN0_RML1(val)	bfin_write16(CAN0_RML1, val)
+#define bfin_read_CAN0_MBTIF1()		bfin_read16(CAN0_MBTIF1)
+#define bfin_write_CAN0_MBTIF1(val)	bfin_write16(CAN0_MBTIF1, val)
+#define bfin_read_CAN0_MBRIF1()		bfin_read16(CAN0_MBRIF1)
+#define bfin_write_CAN0_MBRIF1(val)	bfin_write16(CAN0_MBRIF1, val)
+#define bfin_read_CAN0_MBIM1()		bfin_read16(CAN0_MBIM1)
+#define bfin_write_CAN0_MBIM1(val)	bfin_write16(CAN0_MBIM1, val)
+#define bfin_read_CAN0_RFH1()		bfin_read16(CAN0_RFH1)
+#define bfin_write_CAN0_RFH1(val)	bfin_write16(CAN0_RFH1, val)
+#define bfin_read_CAN0_OPSS1()		bfin_read16(CAN0_OPSS1)
+#define bfin_write_CAN0_OPSS1(val)	bfin_write16(CAN0_OPSS1, val)
+
+/* CAN Controller 0 Config 2 Registers */
+
+#define bfin_read_CAN0_MC2()		bfin_read16(CAN0_MC2)
+#define bfin_write_CAN0_MC2(val)	bfin_write16(CAN0_MC2, val)
+#define bfin_read_CAN0_MD2()		bfin_read16(CAN0_MD2)
+#define bfin_write_CAN0_MD2(val)	bfin_write16(CAN0_MD2, val)
+#define bfin_read_CAN0_TRS2()		bfin_read16(CAN0_TRS2)
+#define bfin_write_CAN0_TRS2(val)	bfin_write16(CAN0_TRS2, val)
+#define bfin_read_CAN0_TRR2()		bfin_read16(CAN0_TRR2)
+#define bfin_write_CAN0_TRR2(val)	bfin_write16(CAN0_TRR2, val)
+#define bfin_read_CAN0_TA2()		bfin_read16(CAN0_TA2)
+#define bfin_write_CAN0_TA2(val)	bfin_write16(CAN0_TA2, val)
+#define bfin_read_CAN0_AA2()		bfin_read16(CAN0_AA2)
+#define bfin_write_CAN0_AA2(val)	bfin_write16(CAN0_AA2, val)
+#define bfin_read_CAN0_RMP2()		bfin_read16(CAN0_RMP2)
+#define bfin_write_CAN0_RMP2(val)	bfin_write16(CAN0_RMP2, val)
+#define bfin_read_CAN0_RML2()		bfin_read16(CAN0_RML2)
+#define bfin_write_CAN0_RML2(val)	bfin_write16(CAN0_RML2, val)
+#define bfin_read_CAN0_MBTIF2()		bfin_read16(CAN0_MBTIF2)
+#define bfin_write_CAN0_MBTIF2(val)	bfin_write16(CAN0_MBTIF2, val)
+#define bfin_read_CAN0_MBRIF2()		bfin_read16(CAN0_MBRIF2)
+#define bfin_write_CAN0_MBRIF2(val)	bfin_write16(CAN0_MBRIF2, val)
+#define bfin_read_CAN0_MBIM2()		bfin_read16(CAN0_MBIM2)
+#define bfin_write_CAN0_MBIM2(val)	bfin_write16(CAN0_MBIM2, val)
+#define bfin_read_CAN0_RFH2()		bfin_read16(CAN0_RFH2)
+#define bfin_write_CAN0_RFH2(val)	bfin_write16(CAN0_RFH2, val)
+#define bfin_read_CAN0_OPSS2()		bfin_read16(CAN0_OPSS2)
+#define bfin_write_CAN0_OPSS2(val)	bfin_write16(CAN0_OPSS2, val)
+
+/* CAN Controller 0 Clock/Interrubfin_read_()t/Counter Registers */
+
+#define bfin_read_CAN0_CLOCK()		bfin_read16(CAN0_CLOCK)
+#define bfin_write_CAN0_CLOCK(val)	bfin_write16(CAN0_CLOCK, val)
+#define bfin_read_CAN0_TIMING()		bfin_read16(CAN0_TIMING)
+#define bfin_write_CAN0_TIMING(val)	bfin_write16(CAN0_TIMING, val)
+#define bfin_read_CAN0_DEBUG()		bfin_read16(CAN0_DEBUG)
+#define bfin_write_CAN0_DEBUG(val)	bfin_write16(CAN0_DEBUG, val)
+#define bfin_read_CAN0_STATUS()		bfin_read16(CAN0_STATUS)
+#define bfin_write_CAN0_STATUS(val)	bfin_write16(CAN0_STATUS, val)
+#define bfin_read_CAN0_CEC()		bfin_read16(CAN0_CEC)
+#define bfin_write_CAN0_CEC(val)	bfin_write16(CAN0_CEC, val)
+#define bfin_read_CAN0_GIS()		bfin_read16(CAN0_GIS)
+#define bfin_write_CAN0_GIS(val)	bfin_write16(CAN0_GIS, val)
+#define bfin_read_CAN0_GIM()		bfin_read16(CAN0_GIM)
+#define bfin_write_CAN0_GIM(val)	bfin_write16(CAN0_GIM, val)
+#define bfin_read_CAN0_GIF()		bfin_read16(CAN0_GIF)
+#define bfin_write_CAN0_GIF(val)	bfin_write16(CAN0_GIF, val)
+#define bfin_read_CAN0_CONTROL()	bfin_read16(CAN0_CONTROL)
+#define bfin_write_CAN0_CONTROL(val)	bfin_write16(CAN0_CONTROL, val)
+#define bfin_read_CAN0_INTR()		bfin_read16(CAN0_INTR)
+#define bfin_write_CAN0_INTR(val)	bfin_write16(CAN0_INTR, val)
+#define bfin_read_CAN0_MBTD()		bfin_read16(CAN0_MBTD)
+#define bfin_write_CAN0_MBTD(val)	bfin_write16(CAN0_MBTD, val)
+#define bfin_read_CAN0_EWR()		bfin_read16(CAN0_EWR)
+#define bfin_write_CAN0_EWR(val)	bfin_write16(CAN0_EWR, val)
+#define bfin_read_CAN0_ESR()		bfin_read16(CAN0_ESR)
+#define bfin_write_CAN0_ESR(val)	bfin_write16(CAN0_ESR, val)
+#define bfin_read_CAN0_UCCNT()		bfin_read16(CAN0_UCCNT)
+#define bfin_write_CAN0_UCCNT(val)	bfin_write16(CAN0_UCCNT, val)
+#define bfin_read_CAN0_UCRC()		bfin_read16(CAN0_UCRC)
+#define bfin_write_CAN0_UCRC(val)	bfin_write16(CAN0_UCRC, val)
+#define bfin_read_CAN0_UCCNF()		bfin_read16(CAN0_UCCNF)
+#define bfin_write_CAN0_UCCNF(val)	bfin_write16(CAN0_UCCNF, val)
+
+/* CAN Controller 0 Accebfin_read_()tance Registers */
+
+#define bfin_read_CAN0_AM00L()		bfin_read16(CAN0_AM00L)
+#define bfin_write_CAN0_AM00L(val)	bfin_write16(CAN0_AM00L, val)
+#define bfin_read_CAN0_AM00H()		bfin_read16(CAN0_AM00H)
+#define bfin_write_CAN0_AM00H(val)	bfin_write16(CAN0_AM00H, val)
+#define bfin_read_CAN0_AM01L()		bfin_read16(CAN0_AM01L)
+#define bfin_write_CAN0_AM01L(val)	bfin_write16(CAN0_AM01L, val)
+#define bfin_read_CAN0_AM01H()		bfin_read16(CAN0_AM01H)
+#define bfin_write_CAN0_AM01H(val)	bfin_write16(CAN0_AM01H, val)
+#define bfin_read_CAN0_AM02L()		bfin_read16(CAN0_AM02L)
+#define bfin_write_CAN0_AM02L(val)	bfin_write16(CAN0_AM02L, val)
+#define bfin_read_CAN0_AM02H()		bfin_read16(CAN0_AM02H)
+#define bfin_write_CAN0_AM02H(val)	bfin_write16(CAN0_AM02H, val)
+#define bfin_read_CAN0_AM03L()		bfin_read16(CAN0_AM03L)
+#define bfin_write_CAN0_AM03L(val)	bfin_write16(CAN0_AM03L, val)
+#define bfin_read_CAN0_AM03H()		bfin_read16(CAN0_AM03H)
+#define bfin_write_CAN0_AM03H(val)	bfin_write16(CAN0_AM03H, val)
+#define bfin_read_CAN0_AM04L()		bfin_read16(CAN0_AM04L)
+#define bfin_write_CAN0_AM04L(val)	bfin_write16(CAN0_AM04L, val)
+#define bfin_read_CAN0_AM04H()		bfin_read16(CAN0_AM04H)
+#define bfin_write_CAN0_AM04H(val)	bfin_write16(CAN0_AM04H, val)
+#define bfin_read_CAN0_AM05L()		bfin_read16(CAN0_AM05L)
+#define bfin_write_CAN0_AM05L(val)	bfin_write16(CAN0_AM05L, val)
+#define bfin_read_CAN0_AM05H()		bfin_read16(CAN0_AM05H)
+#define bfin_write_CAN0_AM05H(val)	bfin_write16(CAN0_AM05H, val)
+#define bfin_read_CAN0_AM06L()		bfin_read16(CAN0_AM06L)
+#define bfin_write_CAN0_AM06L(val)	bfin_write16(CAN0_AM06L, val)
+#define bfin_read_CAN0_AM06H()		bfin_read16(CAN0_AM06H)
+#define bfin_write_CAN0_AM06H(val)	bfin_write16(CAN0_AM06H, val)
+#define bfin_read_CAN0_AM07L()		bfin_read16(CAN0_AM07L)
+#define bfin_write_CAN0_AM07L(val)	bfin_write16(CAN0_AM07L, val)
+#define bfin_read_CAN0_AM07H()		bfin_read16(CAN0_AM07H)
+#define bfin_write_CAN0_AM07H(val)	bfin_write16(CAN0_AM07H, val)
+#define bfin_read_CAN0_AM08L()		bfin_read16(CAN0_AM08L)
+#define bfin_write_CAN0_AM08L(val)	bfin_write16(CAN0_AM08L, val)
+#define bfin_read_CAN0_AM08H()		bfin_read16(CAN0_AM08H)
+#define bfin_write_CAN0_AM08H(val)	bfin_write16(CAN0_AM08H, val)
+#define bfin_read_CAN0_AM09L()		bfin_read16(CAN0_AM09L)
+#define bfin_write_CAN0_AM09L(val)	bfin_write16(CAN0_AM09L, val)
+#define bfin_read_CAN0_AM09H()		bfin_read16(CAN0_AM09H)
+#define bfin_write_CAN0_AM09H(val)	bfin_write16(CAN0_AM09H, val)
+#define bfin_read_CAN0_AM10L()		bfin_read16(CAN0_AM10L)
+#define bfin_write_CAN0_AM10L(val)	bfin_write16(CAN0_AM10L, val)
+#define bfin_read_CAN0_AM10H()		bfin_read16(CAN0_AM10H)
+#define bfin_write_CAN0_AM10H(val)	bfin_write16(CAN0_AM10H, val)
+#define bfin_read_CAN0_AM11L()		bfin_read16(CAN0_AM11L)
+#define bfin_write_CAN0_AM11L(val)	bfin_write16(CAN0_AM11L, val)
+#define bfin_read_CAN0_AM11H()		bfin_read16(CAN0_AM11H)
+#define bfin_write_CAN0_AM11H(val)	bfin_write16(CAN0_AM11H, val)
+#define bfin_read_CAN0_AM12L()		bfin_read16(CAN0_AM12L)
+#define bfin_write_CAN0_AM12L(val)	bfin_write16(CAN0_AM12L, val)
+#define bfin_read_CAN0_AM12H()		bfin_read16(CAN0_AM12H)
+#define bfin_write_CAN0_AM12H(val)	bfin_write16(CAN0_AM12H, val)
+#define bfin_read_CAN0_AM13L()		bfin_read16(CAN0_AM13L)
+#define bfin_write_CAN0_AM13L(val)	bfin_write16(CAN0_AM13L, val)
+#define bfin_read_CAN0_AM13H()		bfin_read16(CAN0_AM13H)
+#define bfin_write_CAN0_AM13H(val)	bfin_write16(CAN0_AM13H, val)
+#define bfin_read_CAN0_AM14L()		bfin_read16(CAN0_AM14L)
+#define bfin_write_CAN0_AM14L(val)	bfin_write16(CAN0_AM14L, val)
+#define bfin_read_CAN0_AM14H()		bfin_read16(CAN0_AM14H)
+#define bfin_write_CAN0_AM14H(val)	bfin_write16(CAN0_AM14H, val)
+#define bfin_read_CAN0_AM15L()		bfin_read16(CAN0_AM15L)
+#define bfin_write_CAN0_AM15L(val)	bfin_write16(CAN0_AM15L, val)
+#define bfin_read_CAN0_AM15H()		bfin_read16(CAN0_AM15H)
+#define bfin_write_CAN0_AM15H(val)	bfin_write16(CAN0_AM15H, val)
+
+/* CAN Controller 0 Accebfin_read_()tance Registers */
+
+#define bfin_read_CAN0_AM16L()		bfin_read16(CAN0_AM16L)
+#define bfin_write_CAN0_AM16L(val)	bfin_write16(CAN0_AM16L, val)
+#define bfin_read_CAN0_AM16H()		bfin_read16(CAN0_AM16H)
+#define bfin_write_CAN0_AM16H(val)	bfin_write16(CAN0_AM16H, val)
+#define bfin_read_CAN0_AM17L()		bfin_read16(CAN0_AM17L)
+#define bfin_write_CAN0_AM17L(val)	bfin_write16(CAN0_AM17L, val)
+#define bfin_read_CAN0_AM17H()		bfin_read16(CAN0_AM17H)
+#define bfin_write_CAN0_AM17H(val)	bfin_write16(CAN0_AM17H, val)
+#define bfin_read_CAN0_AM18L()		bfin_read16(CAN0_AM18L)
+#define bfin_write_CAN0_AM18L(val)	bfin_write16(CAN0_AM18L, val)
+#define bfin_read_CAN0_AM18H()		bfin_read16(CAN0_AM18H)
+#define bfin_write_CAN0_AM18H(val)	bfin_write16(CAN0_AM18H, val)
+#define bfin_read_CAN0_AM19L()		bfin_read16(CAN0_AM19L)
+#define bfin_write_CAN0_AM19L(val)	bfin_write16(CAN0_AM19L, val)
+#define bfin_read_CAN0_AM19H()		bfin_read16(CAN0_AM19H)
+#define bfin_write_CAN0_AM19H(val)	bfin_write16(CAN0_AM19H, val)
+#define bfin_read_CAN0_AM20L()		bfin_read16(CAN0_AM20L)
+#define bfin_write_CAN0_AM20L(val)	bfin_write16(CAN0_AM20L, val)
+#define bfin_read_CAN0_AM20H()		bfin_read16(CAN0_AM20H)
+#define bfin_write_CAN0_AM20H(val)	bfin_write16(CAN0_AM20H, val)
+#define bfin_read_CAN0_AM21L()		bfin_read16(CAN0_AM21L)
+#define bfin_write_CAN0_AM21L(val)	bfin_write16(CAN0_AM21L, val)
+#define bfin_read_CAN0_AM21H()		bfin_read16(CAN0_AM21H)
+#define bfin_write_CAN0_AM21H(val)	bfin_write16(CAN0_AM21H, val)
+#define bfin_read_CAN0_AM22L()		bfin_read16(CAN0_AM22L)
+#define bfin_write_CAN0_AM22L(val)	bfin_write16(CAN0_AM22L, val)
+#define bfin_read_CAN0_AM22H()		bfin_read16(CAN0_AM22H)
+#define bfin_write_CAN0_AM22H(val)	bfin_write16(CAN0_AM22H, val)
+#define bfin_read_CAN0_AM23L()		bfin_read16(CAN0_AM23L)
+#define bfin_write_CAN0_AM23L(val)	bfin_write16(CAN0_AM23L, val)
+#define bfin_read_CAN0_AM23H()		bfin_read16(CAN0_AM23H)
+#define bfin_write_CAN0_AM23H(val)	bfin_write16(CAN0_AM23H, val)
+#define bfin_read_CAN0_AM24L()		bfin_read16(CAN0_AM24L)
+#define bfin_write_CAN0_AM24L(val)	bfin_write16(CAN0_AM24L, val)
+#define bfin_read_CAN0_AM24H()		bfin_read16(CAN0_AM24H)
+#define bfin_write_CAN0_AM24H(val)	bfin_write16(CAN0_AM24H, val)
+#define bfin_read_CAN0_AM25L()		bfin_read16(CAN0_AM25L)
+#define bfin_write_CAN0_AM25L(val)	bfin_write16(CAN0_AM25L, val)
+#define bfin_read_CAN0_AM25H()		bfin_read16(CAN0_AM25H)
+#define bfin_write_CAN0_AM25H(val)	bfin_write16(CAN0_AM25H, val)
+#define bfin_read_CAN0_AM26L()		bfin_read16(CAN0_AM26L)
+#define bfin_write_CAN0_AM26L(val)	bfin_write16(CAN0_AM26L, val)
+#define bfin_read_CAN0_AM26H()		bfin_read16(CAN0_AM26H)
+#define bfin_write_CAN0_AM26H(val)	bfin_write16(CAN0_AM26H, val)
+#define bfin_read_CAN0_AM27L()		bfin_read16(CAN0_AM27L)
+#define bfin_write_CAN0_AM27L(val)	bfin_write16(CAN0_AM27L, val)
+#define bfin_read_CAN0_AM27H()		bfin_read16(CAN0_AM27H)
+#define bfin_write_CAN0_AM27H(val)	bfin_write16(CAN0_AM27H, val)
+#define bfin_read_CAN0_AM28L()		bfin_read16(CAN0_AM28L)
+#define bfin_write_CAN0_AM28L(val)	bfin_write16(CAN0_AM28L, val)
+#define bfin_read_CAN0_AM28H()		bfin_read16(CAN0_AM28H)
+#define bfin_write_CAN0_AM28H(val)	bfin_write16(CAN0_AM28H, val)
+#define bfin_read_CAN0_AM29L()		bfin_read16(CAN0_AM29L)
+#define bfin_write_CAN0_AM29L(val)	bfin_write16(CAN0_AM29L, val)
+#define bfin_read_CAN0_AM29H()		bfin_read16(CAN0_AM29H)
+#define bfin_write_CAN0_AM29H(val)	bfin_write16(CAN0_AM29H, val)
+#define bfin_read_CAN0_AM30L()		bfin_read16(CAN0_AM30L)
+#define bfin_write_CAN0_AM30L(val)	bfin_write16(CAN0_AM30L, val)
+#define bfin_read_CAN0_AM30H()		bfin_read16(CAN0_AM30H)
+#define bfin_write_CAN0_AM30H(val)	bfin_write16(CAN0_AM30H, val)
+#define bfin_read_CAN0_AM31L()		bfin_read16(CAN0_AM31L)
+#define bfin_write_CAN0_AM31L(val)	bfin_write16(CAN0_AM31L, val)
+#define bfin_read_CAN0_AM31H()		bfin_read16(CAN0_AM31H)
+#define bfin_write_CAN0_AM31H(val)	bfin_write16(CAN0_AM31H, val)
+
+/* CAN Controller 0 Mailbox Data Registers */
+
+#define bfin_read_CAN0_MB00_DATA0()		bfin_read16(CAN0_MB00_DATA0)
+#define bfin_write_CAN0_MB00_DATA0(val)		bfin_write16(CAN0_MB00_DATA0, val)
+#define bfin_read_CAN0_MB00_DATA1()		bfin_read16(CAN0_MB00_DATA1)
+#define bfin_write_CAN0_MB00_DATA1(val)		bfin_write16(CAN0_MB00_DATA1, val)
+#define bfin_read_CAN0_MB00_DATA2()		bfin_read16(CAN0_MB00_DATA2)
+#define bfin_write_CAN0_MB00_DATA2(val)		bfin_write16(CAN0_MB00_DATA2, val)
+#define bfin_read_CAN0_MB00_DATA3()		bfin_read16(CAN0_MB00_DATA3)
+#define bfin_write_CAN0_MB00_DATA3(val)		bfin_write16(CAN0_MB00_DATA3, val)
+#define bfin_read_CAN0_MB00_LENGTH()		bfin_read16(CAN0_MB00_LENGTH)
+#define bfin_write_CAN0_MB00_LENGTH(val)	bfin_write16(CAN0_MB00_LENGTH, val)
+#define bfin_read_CAN0_MB00_TIMESTAMP()		bfin_read16(CAN0_MB00_TIMESTAMP)
+#define bfin_write_CAN0_MB00_TIMESTAMP(val)	bfin_write16(CAN0_MB00_TIMESTAMP, val)
+#define bfin_read_CAN0_MB00_ID0()		bfin_read16(CAN0_MB00_ID0)
+#define bfin_write_CAN0_MB00_ID0(val)		bfin_write16(CAN0_MB00_ID0, val)
+#define bfin_read_CAN0_MB00_ID1()		bfin_read16(CAN0_MB00_ID1)
+#define bfin_write_CAN0_MB00_ID1(val)		bfin_write16(CAN0_MB00_ID1, val)
+#define bfin_read_CAN0_MB01_DATA0()		bfin_read16(CAN0_MB01_DATA0)
+#define bfin_write_CAN0_MB01_DATA0(val)		bfin_write16(CAN0_MB01_DATA0, val)
+#define bfin_read_CAN0_MB01_DATA1()		bfin_read16(CAN0_MB01_DATA1)
+#define bfin_write_CAN0_MB01_DATA1(val)		bfin_write16(CAN0_MB01_DATA1, val)
+#define bfin_read_CAN0_MB01_DATA2()		bfin_read16(CAN0_MB01_DATA2)
+#define bfin_write_CAN0_MB01_DATA2(val)		bfin_write16(CAN0_MB01_DATA2, val)
+#define bfin_read_CAN0_MB01_DATA3()		bfin_read16(CAN0_MB01_DATA3)
+#define bfin_write_CAN0_MB01_DATA3(val)		bfin_write16(CAN0_MB01_DATA3, val)
+#define bfin_read_CAN0_MB01_LENGTH()		bfin_read16(CAN0_MB01_LENGTH)
+#define bfin_write_CAN0_MB01_LENGTH(val)	bfin_write16(CAN0_MB01_LENGTH, val)
+#define bfin_read_CAN0_MB01_TIMESTAMP()		bfin_read16(CAN0_MB01_TIMESTAMP)
+#define bfin_write_CAN0_MB01_TIMESTAMP(val)	bfin_write16(CAN0_MB01_TIMESTAMP, val)
+#define bfin_read_CAN0_MB01_ID0()		bfin_read16(CAN0_MB01_ID0)
+#define bfin_write_CAN0_MB01_ID0(val)		bfin_write16(CAN0_MB01_ID0, val)
+#define bfin_read_CAN0_MB01_ID1()		bfin_read16(CAN0_MB01_ID1)
+#define bfin_write_CAN0_MB01_ID1(val)		bfin_write16(CAN0_MB01_ID1, val)
+#define bfin_read_CAN0_MB02_DATA0()		bfin_read16(CAN0_MB02_DATA0)
+#define bfin_write_CAN0_MB02_DATA0(val)		bfin_write16(CAN0_MB02_DATA0, val)
+#define bfin_read_CAN0_MB02_DATA1()		bfin_read16(CAN0_MB02_DATA1)
+#define bfin_write_CAN0_MB02_DATA1(val)		bfin_write16(CAN0_MB02_DATA1, val)
+#define bfin_read_CAN0_MB02_DATA2()		bfin_read16(CAN0_MB02_DATA2)
+#define bfin_write_CAN0_MB02_DATA2(val)		bfin_write16(CAN0_MB02_DATA2, val)
+#define bfin_read_CAN0_MB02_DATA3()		bfin_read16(CAN0_MB02_DATA3)
+#define bfin_write_CAN0_MB02_DATA3(val)		bfin_write16(CAN0_MB02_DATA3, val)
+#define bfin_read_CAN0_MB02_LENGTH()		bfin_read16(CAN0_MB02_LENGTH)
+#define bfin_write_CAN0_MB02_LENGTH(val)	bfin_write16(CAN0_MB02_LENGTH, val)
+#define bfin_read_CAN0_MB02_TIMESTAMP()		bfin_read16(CAN0_MB02_TIMESTAMP)
+#define bfin_write_CAN0_MB02_TIMESTAMP(val)	bfin_write16(CAN0_MB02_TIMESTAMP, val)
+#define bfin_read_CAN0_MB02_ID0()		bfin_read16(CAN0_MB02_ID0)
+#define bfin_write_CAN0_MB02_ID0(val)		bfin_write16(CAN0_MB02_ID0, val)
+#define bfin_read_CAN0_MB02_ID1()		bfin_read16(CAN0_MB02_ID1)
+#define bfin_write_CAN0_MB02_ID1(val)		bfin_write16(CAN0_MB02_ID1, val)
+#define bfin_read_CAN0_MB03_DATA0()		bfin_read16(CAN0_MB03_DATA0)
+#define bfin_write_CAN0_MB03_DATA0(val)		bfin_write16(CAN0_MB03_DATA0, val)
+#define bfin_read_CAN0_MB03_DATA1()		bfin_read16(CAN0_MB03_DATA1)
+#define bfin_write_CAN0_MB03_DATA1(val)		bfin_write16(CAN0_MB03_DATA1, val)
+#define bfin_read_CAN0_MB03_DATA2()		bfin_read16(CAN0_MB03_DATA2)
+#define bfin_write_CAN0_MB03_DATA2(val)		bfin_write16(CAN0_MB03_DATA2, val)
+#define bfin_read_CAN0_MB03_DATA3()		bfin_read16(CAN0_MB03_DATA3)
+#define bfin_write_CAN0_MB03_DATA3(val)		bfin_write16(CAN0_MB03_DATA3, val)
+#define bfin_read_CAN0_MB03_LENGTH()		bfin_read16(CAN0_MB03_LENGTH)
+#define bfin_write_CAN0_MB03_LENGTH(val)	bfin_write16(CAN0_MB03_LENGTH, val)
+#define bfin_read_CAN0_MB03_TIMESTAMP()		bfin_read16(CAN0_MB03_TIMESTAMP)
+#define bfin_write_CAN0_MB03_TIMESTAMP(val)	bfin_write16(CAN0_MB03_TIMESTAMP, val)
+#define bfin_read_CAN0_MB03_ID0()		bfin_read16(CAN0_MB03_ID0)
+#define bfin_write_CAN0_MB03_ID0(val)		bfin_write16(CAN0_MB03_ID0, val)
+#define bfin_read_CAN0_MB03_ID1()		bfin_read16(CAN0_MB03_ID1)
+#define bfin_write_CAN0_MB03_ID1(val)		bfin_write16(CAN0_MB03_ID1, val)
+#define bfin_read_CAN0_MB04_DATA0()		bfin_read16(CAN0_MB04_DATA0)
+#define bfin_write_CAN0_MB04_DATA0(val)		bfin_write16(CAN0_MB04_DATA0, val)
+#define bfin_read_CAN0_MB04_DATA1()		bfin_read16(CAN0_MB04_DATA1)
+#define bfin_write_CAN0_MB04_DATA1(val)		bfin_write16(CAN0_MB04_DATA1, val)
+#define bfin_read_CAN0_MB04_DATA2()		bfin_read16(CAN0_MB04_DATA2)
+#define bfin_write_CAN0_MB04_DATA2(val)		bfin_write16(CAN0_MB04_DATA2, val)
+#define bfin_read_CAN0_MB04_DATA3()		bfin_read16(CAN0_MB04_DATA3)
+#define bfin_write_CAN0_MB04_DATA3(val)		bfin_write16(CAN0_MB04_DATA3, val)
+#define bfin_read_CAN0_MB04_LENGTH()		bfin_read16(CAN0_MB04_LENGTH)
+#define bfin_write_CAN0_MB04_LENGTH(val)	bfin_write16(CAN0_MB04_LENGTH, val)
+#define bfin_read_CAN0_MB04_TIMESTAMP()		bfin_read16(CAN0_MB04_TIMESTAMP)
+#define bfin_write_CAN0_MB04_TIMESTAMP(val)	bfin_write16(CAN0_MB04_TIMESTAMP, val)
+#define bfin_read_CAN0_MB04_ID0()		bfin_read16(CAN0_MB04_ID0)
+#define bfin_write_CAN0_MB04_ID0(val)		bfin_write16(CAN0_MB04_ID0, val)
+#define bfin_read_CAN0_MB04_ID1()		bfin_read16(CAN0_MB04_ID1)
+#define bfin_write_CAN0_MB04_ID1(val)		bfin_write16(CAN0_MB04_ID1, val)
+#define bfin_read_CAN0_MB05_DATA0()		bfin_read16(CAN0_MB05_DATA0)
+#define bfin_write_CAN0_MB05_DATA0(val)		bfin_write16(CAN0_MB05_DATA0, val)
+#define bfin_read_CAN0_MB05_DATA1()		bfin_read16(CAN0_MB05_DATA1)
+#define bfin_write_CAN0_MB05_DATA1(val)		bfin_write16(CAN0_MB05_DATA1, val)
+#define bfin_read_CAN0_MB05_DATA2()		bfin_read16(CAN0_MB05_DATA2)
+#define bfin_write_CAN0_MB05_DATA2(val)		bfin_write16(CAN0_MB05_DATA2, val)
+#define bfin_read_CAN0_MB05_DATA3()		bfin_read16(CAN0_MB05_DATA3)
+#define bfin_write_CAN0_MB05_DATA3(val)		bfin_write16(CAN0_MB05_DATA3, val)
+#define bfin_read_CAN0_MB05_LENGTH()		bfin_read16(CAN0_MB05_LENGTH)
+#define bfin_write_CAN0_MB05_LENGTH(val)	bfin_write16(CAN0_MB05_LENGTH, val)
+#define bfin_read_CAN0_MB05_TIMESTAMP()		bfin_read16(CAN0_MB05_TIMESTAMP)
+#define bfin_write_CAN0_MB05_TIMESTAMP(val)	bfin_write16(CAN0_MB05_TIMESTAMP, val)
+#define bfin_read_CAN0_MB05_ID0()		bfin_read16(CAN0_MB05_ID0)
+#define bfin_write_CAN0_MB05_ID0(val)		bfin_write16(CAN0_MB05_ID0, val)
+#define bfin_read_CAN0_MB05_ID1()		bfin_read16(CAN0_MB05_ID1)
+#define bfin_write_CAN0_MB05_ID1(val)		bfin_write16(CAN0_MB05_ID1, val)
+#define bfin_read_CAN0_MB06_DATA0()		bfin_read16(CAN0_MB06_DATA0)
+#define bfin_write_CAN0_MB06_DATA0(val)		bfin_write16(CAN0_MB06_DATA0, val)
+#define bfin_read_CAN0_MB06_DATA1()		bfin_read16(CAN0_MB06_DATA1)
+#define bfin_write_CAN0_MB06_DATA1(val)		bfin_write16(CAN0_MB06_DATA1, val)
+#define bfin_read_CAN0_MB06_DATA2()		bfin_read16(CAN0_MB06_DATA2)
+#define bfin_write_CAN0_MB06_DATA2(val)		bfin_write16(CAN0_MB06_DATA2, val)
+#define bfin_read_CAN0_MB06_DATA3()		bfin_read16(CAN0_MB06_DATA3)
+#define bfin_write_CAN0_MB06_DATA3(val)		bfin_write16(CAN0_MB06_DATA3, val)
+#define bfin_read_CAN0_MB06_LENGTH()		bfin_read16(CAN0_MB06_LENGTH)
+#define bfin_write_CAN0_MB06_LENGTH(val)	bfin_write16(CAN0_MB06_LENGTH, val)
+#define bfin_read_CAN0_MB06_TIMESTAMP()		bfin_read16(CAN0_MB06_TIMESTAMP)
+#define bfin_write_CAN0_MB06_TIMESTAMP(val)	bfin_write16(CAN0_MB06_TIMESTAMP, val)
+#define bfin_read_CAN0_MB06_ID0()		bfin_read16(CAN0_MB06_ID0)
+#define bfin_write_CAN0_MB06_ID0(val)		bfin_write16(CAN0_MB06_ID0, val)
+#define bfin_read_CAN0_MB06_ID1()		bfin_read16(CAN0_MB06_ID1)
+#define bfin_write_CAN0_MB06_ID1(val)		bfin_write16(CAN0_MB06_ID1, val)
+#define bfin_read_CAN0_MB07_DATA0()		bfin_read16(CAN0_MB07_DATA0)
+#define bfin_write_CAN0_MB07_DATA0(val)		bfin_write16(CAN0_MB07_DATA0, val)
+#define bfin_read_CAN0_MB07_DATA1()		bfin_read16(CAN0_MB07_DATA1)
+#define bfin_write_CAN0_MB07_DATA1(val)		bfin_write16(CAN0_MB07_DATA1, val)
+#define bfin_read_CAN0_MB07_DATA2()		bfin_read16(CAN0_MB07_DATA2)
+#define bfin_write_CAN0_MB07_DATA2(val)		bfin_write16(CAN0_MB07_DATA2, val)
+#define bfin_read_CAN0_MB07_DATA3()		bfin_read16(CAN0_MB07_DATA3)
+#define bfin_write_CAN0_MB07_DATA3(val)		bfin_write16(CAN0_MB07_DATA3, val)
+#define bfin_read_CAN0_MB07_LENGTH()		bfin_read16(CAN0_MB07_LENGTH)
+#define bfin_write_CAN0_MB07_LENGTH(val)	bfin_write16(CAN0_MB07_LENGTH, val)
+#define bfin_read_CAN0_MB07_TIMESTAMP()		bfin_read16(CAN0_MB07_TIMESTAMP)
+#define bfin_write_CAN0_MB07_TIMESTAMP(val)	bfin_write16(CAN0_MB07_TIMESTAMP, val)
+#define bfin_read_CAN0_MB07_ID0()		bfin_read16(CAN0_MB07_ID0)
+#define bfin_write_CAN0_MB07_ID0(val)		bfin_write16(CAN0_MB07_ID0, val)
+#define bfin_read_CAN0_MB07_ID1()		bfin_read16(CAN0_MB07_ID1)
+#define bfin_write_CAN0_MB07_ID1(val)		bfin_write16(CAN0_MB07_ID1, val)
+#define bfin_read_CAN0_MB08_DATA0()		bfin_read16(CAN0_MB08_DATA0)
+#define bfin_write_CAN0_MB08_DATA0(val)		bfin_write16(CAN0_MB08_DATA0, val)
+#define bfin_read_CAN0_MB08_DATA1()		bfin_read16(CAN0_MB08_DATA1)
+#define bfin_write_CAN0_MB08_DATA1(val)		bfin_write16(CAN0_MB08_DATA1, val)
+#define bfin_read_CAN0_MB08_DATA2()		bfin_read16(CAN0_MB08_DATA2)
+#define bfin_write_CAN0_MB08_DATA2(val)		bfin_write16(CAN0_MB08_DATA2, val)
+#define bfin_read_CAN0_MB08_DATA3()		bfin_read16(CAN0_MB08_DATA3)
+#define bfin_write_CAN0_MB08_DATA3(val)		bfin_write16(CAN0_MB08_DATA3, val)
+#define bfin_read_CAN0_MB08_LENGTH()		bfin_read16(CAN0_MB08_LENGTH)
+#define bfin_write_CAN0_MB08_LENGTH(val)	bfin_write16(CAN0_MB08_LENGTH, val)
+#define bfin_read_CAN0_MB08_TIMESTAMP()		bfin_read16(CAN0_MB08_TIMESTAMP)
+#define bfin_write_CAN0_MB08_TIMESTAMP(val)	bfin_write16(CAN0_MB08_TIMESTAMP, val)
+#define bfin_read_CAN0_MB08_ID0()		bfin_read16(CAN0_MB08_ID0)
+#define bfin_write_CAN0_MB08_ID0(val)		bfin_write16(CAN0_MB08_ID0, val)
+#define bfin_read_CAN0_MB08_ID1()		bfin_read16(CAN0_MB08_ID1)
+#define bfin_write_CAN0_MB08_ID1(val)		bfin_write16(CAN0_MB08_ID1, val)
+#define bfin_read_CAN0_MB09_DATA0()		bfin_read16(CAN0_MB09_DATA0)
+#define bfin_write_CAN0_MB09_DATA0(val)		bfin_write16(CAN0_MB09_DATA0, val)
+#define bfin_read_CAN0_MB09_DATA1()		bfin_read16(CAN0_MB09_DATA1)
+#define bfin_write_CAN0_MB09_DATA1(val)		bfin_write16(CAN0_MB09_DATA1, val)
+#define bfin_read_CAN0_MB09_DATA2()		bfin_read16(CAN0_MB09_DATA2)
+#define bfin_write_CAN0_MB09_DATA2(val)		bfin_write16(CAN0_MB09_DATA2, val)
+#define bfin_read_CAN0_MB09_DATA3()		bfin_read16(CAN0_MB09_DATA3)
+#define bfin_write_CAN0_MB09_DATA3(val)		bfin_write16(CAN0_MB09_DATA3, val)
+#define bfin_read_CAN0_MB09_LENGTH()		bfin_read16(CAN0_MB09_LENGTH)
+#define bfin_write_CAN0_MB09_LENGTH(val)	bfin_write16(CAN0_MB09_LENGTH, val)
+#define bfin_read_CAN0_MB09_TIMESTAMP()		bfin_read16(CAN0_MB09_TIMESTAMP)
+#define bfin_write_CAN0_MB09_TIMESTAMP(val)	bfin_write16(CAN0_MB09_TIMESTAMP, val)
+#define bfin_read_CAN0_MB09_ID0()		bfin_read16(CAN0_MB09_ID0)
+#define bfin_write_CAN0_MB09_ID0(val)		bfin_write16(CAN0_MB09_ID0, val)
+#define bfin_read_CAN0_MB09_ID1()		bfin_read16(CAN0_MB09_ID1)
+#define bfin_write_CAN0_MB09_ID1(val)		bfin_write16(CAN0_MB09_ID1, val)
+#define bfin_read_CAN0_MB10_DATA0()		bfin_read16(CAN0_MB10_DATA0)
+#define bfin_write_CAN0_MB10_DATA0(val)		bfin_write16(CAN0_MB10_DATA0, val)
+#define bfin_read_CAN0_MB10_DATA1()		bfin_read16(CAN0_MB10_DATA1)
+#define bfin_write_CAN0_MB10_DATA1(val)		bfin_write16(CAN0_MB10_DATA1, val)
+#define bfin_read_CAN0_MB10_DATA2()		bfin_read16(CAN0_MB10_DATA2)
+#define bfin_write_CAN0_MB10_DATA2(val)		bfin_write16(CAN0_MB10_DATA2, val)
+#define bfin_read_CAN0_MB10_DATA3()		bfin_read16(CAN0_MB10_DATA3)
+#define bfin_write_CAN0_MB10_DATA3(val)		bfin_write16(CAN0_MB10_DATA3, val)
+#define bfin_read_CAN0_MB10_LENGTH()		bfin_read16(CAN0_MB10_LENGTH)
+#define bfin_write_CAN0_MB10_LENGTH(val)	bfin_write16(CAN0_MB10_LENGTH, val)
+#define bfin_read_CAN0_MB10_TIMESTAMP()		bfin_read16(CAN0_MB10_TIMESTAMP)
+#define bfin_write_CAN0_MB10_TIMESTAMP(val)	bfin_write16(CAN0_MB10_TIMESTAMP, val)
+#define bfin_read_CAN0_MB10_ID0()		bfin_read16(CAN0_MB10_ID0)
+#define bfin_write_CAN0_MB10_ID0(val)		bfin_write16(CAN0_MB10_ID0, val)
+#define bfin_read_CAN0_MB10_ID1()		bfin_read16(CAN0_MB10_ID1)
+#define bfin_write_CAN0_MB10_ID1(val)		bfin_write16(CAN0_MB10_ID1, val)
+#define bfin_read_CAN0_MB11_DATA0()		bfin_read16(CAN0_MB11_DATA0)
+#define bfin_write_CAN0_MB11_DATA0(val)		bfin_write16(CAN0_MB11_DATA0, val)
+#define bfin_read_CAN0_MB11_DATA1()		bfin_read16(CAN0_MB11_DATA1)
+#define bfin_write_CAN0_MB11_DATA1(val)		bfin_write16(CAN0_MB11_DATA1, val)
+#define bfin_read_CAN0_MB11_DATA2()		bfin_read16(CAN0_MB11_DATA2)
+#define bfin_write_CAN0_MB11_DATA2(val)		bfin_write16(CAN0_MB11_DATA2, val)
+#define bfin_read_CAN0_MB11_DATA3()		bfin_read16(CAN0_MB11_DATA3)
+#define bfin_write_CAN0_MB11_DATA3(val)		bfin_write16(CAN0_MB11_DATA3, val)
+#define bfin_read_CAN0_MB11_LENGTH()		bfin_read16(CAN0_MB11_LENGTH)
+#define bfin_write_CAN0_MB11_LENGTH(val)	bfin_write16(CAN0_MB11_LENGTH, val)
+#define bfin_read_CAN0_MB11_TIMESTAMP()		bfin_read16(CAN0_MB11_TIMESTAMP)
+#define bfin_write_CAN0_MB11_TIMESTAMP(val)	bfin_write16(CAN0_MB11_TIMESTAMP, val)
+#define bfin_read_CAN0_MB11_ID0()		bfin_read16(CAN0_MB11_ID0)
+#define bfin_write_CAN0_MB11_ID0(val)		bfin_write16(CAN0_MB11_ID0, val)
+#define bfin_read_CAN0_MB11_ID1()		bfin_read16(CAN0_MB11_ID1)
+#define bfin_write_CAN0_MB11_ID1(val)		bfin_write16(CAN0_MB11_ID1, val)
+#define bfin_read_CAN0_MB12_DATA0()		bfin_read16(CAN0_MB12_DATA0)
+#define bfin_write_CAN0_MB12_DATA0(val)		bfin_write16(CAN0_MB12_DATA0, val)
+#define bfin_read_CAN0_MB12_DATA1()		bfin_read16(CAN0_MB12_DATA1)
+#define bfin_write_CAN0_MB12_DATA1(val)		bfin_write16(CAN0_MB12_DATA1, val)
+#define bfin_read_CAN0_MB12_DATA2()		bfin_read16(CAN0_MB12_DATA2)
+#define bfin_write_CAN0_MB12_DATA2(val)		bfin_write16(CAN0_MB12_DATA2, val)
+#define bfin_read_CAN0_MB12_DATA3()		bfin_read16(CAN0_MB12_DATA3)
+#define bfin_write_CAN0_MB12_DATA3(val)		bfin_write16(CAN0_MB12_DATA3, val)
+#define bfin_read_CAN0_MB12_LENGTH()		bfin_read16(CAN0_MB12_LENGTH)
+#define bfin_write_CAN0_MB12_LENGTH(val)	bfin_write16(CAN0_MB12_LENGTH, val)
+#define bfin_read_CAN0_MB12_TIMESTAMP()		bfin_read16(CAN0_MB12_TIMESTAMP)
+#define bfin_write_CAN0_MB12_TIMESTAMP(val)	bfin_write16(CAN0_MB12_TIMESTAMP, val)
+#define bfin_read_CAN0_MB12_ID0()		bfin_read16(CAN0_MB12_ID0)
+#define bfin_write_CAN0_MB12_ID0(val)		bfin_write16(CAN0_MB12_ID0, val)
+#define bfin_read_CAN0_MB12_ID1()		bfin_read16(CAN0_MB12_ID1)
+#define bfin_write_CAN0_MB12_ID1(val)		bfin_write16(CAN0_MB12_ID1, val)
+#define bfin_read_CAN0_MB13_DATA0()		bfin_read16(CAN0_MB13_DATA0)
+#define bfin_write_CAN0_MB13_DATA0(val)		bfin_write16(CAN0_MB13_DATA0, val)
+#define bfin_read_CAN0_MB13_DATA1()		bfin_read16(CAN0_MB13_DATA1)
+#define bfin_write_CAN0_MB13_DATA1(val)		bfin_write16(CAN0_MB13_DATA1, val)
+#define bfin_read_CAN0_MB13_DATA2()		bfin_read16(CAN0_MB13_DATA2)
+#define bfin_write_CAN0_MB13_DATA2(val)		bfin_write16(CAN0_MB13_DATA2, val)
+#define bfin_read_CAN0_MB13_DATA3()		bfin_read16(CAN0_MB13_DATA3)
+#define bfin_write_CAN0_MB13_DATA3(val)		bfin_write16(CAN0_MB13_DATA3, val)
+#define bfin_read_CAN0_MB13_LENGTH()		bfin_read16(CAN0_MB13_LENGTH)
+#define bfin_write_CAN0_MB13_LENGTH(val)	bfin_write16(CAN0_MB13_LENGTH, val)
+#define bfin_read_CAN0_MB13_TIMESTAMP()		bfin_read16(CAN0_MB13_TIMESTAMP)
+#define bfin_write_CAN0_MB13_TIMESTAMP(val)	bfin_write16(CAN0_MB13_TIMESTAMP, val)
+#define bfin_read_CAN0_MB13_ID0()		bfin_read16(CAN0_MB13_ID0)
+#define bfin_write_CAN0_MB13_ID0(val)		bfin_write16(CAN0_MB13_ID0, val)
+#define bfin_read_CAN0_MB13_ID1()		bfin_read16(CAN0_MB13_ID1)
+#define bfin_write_CAN0_MB13_ID1(val)		bfin_write16(CAN0_MB13_ID1, val)
+#define bfin_read_CAN0_MB14_DATA0()		bfin_read16(CAN0_MB14_DATA0)
+#define bfin_write_CAN0_MB14_DATA0(val)		bfin_write16(CAN0_MB14_DATA0, val)
+#define bfin_read_CAN0_MB14_DATA1()		bfin_read16(CAN0_MB14_DATA1)
+#define bfin_write_CAN0_MB14_DATA1(val)		bfin_write16(CAN0_MB14_DATA1, val)
+#define bfin_read_CAN0_MB14_DATA2()		bfin_read16(CAN0_MB14_DATA2)
+#define bfin_write_CAN0_MB14_DATA2(val)		bfin_write16(CAN0_MB14_DATA2, val)
+#define bfin_read_CAN0_MB14_DATA3()		bfin_read16(CAN0_MB14_DATA3)
+#define bfin_write_CAN0_MB14_DATA3(val)		bfin_write16(CAN0_MB14_DATA3, val)
+#define bfin_read_CAN0_MB14_LENGTH()		bfin_read16(CAN0_MB14_LENGTH)
+#define bfin_write_CAN0_MB14_LENGTH(val)	bfin_write16(CAN0_MB14_LENGTH, val)
+#define bfin_read_CAN0_MB14_TIMESTAMP()		bfin_read16(CAN0_MB14_TIMESTAMP)
+#define bfin_write_CAN0_MB14_TIMESTAMP(val)	bfin_write16(CAN0_MB14_TIMESTAMP, val)
+#define bfin_read_CAN0_MB14_ID0()		bfin_read16(CAN0_MB14_ID0)
+#define bfin_write_CAN0_MB14_ID0(val)		bfin_write16(CAN0_MB14_ID0, val)
+#define bfin_read_CAN0_MB14_ID1()		bfin_read16(CAN0_MB14_ID1)
+#define bfin_write_CAN0_MB14_ID1(val)		bfin_write16(CAN0_MB14_ID1, val)
+#define bfin_read_CAN0_MB15_DATA0()		bfin_read16(CAN0_MB15_DATA0)
+#define bfin_write_CAN0_MB15_DATA0(val)		bfin_write16(CAN0_MB15_DATA0, val)
+#define bfin_read_CAN0_MB15_DATA1()		bfin_read16(CAN0_MB15_DATA1)
+#define bfin_write_CAN0_MB15_DATA1(val)		bfin_write16(CAN0_MB15_DATA1, val)
+#define bfin_read_CAN0_MB15_DATA2()		bfin_read16(CAN0_MB15_DATA2)
+#define bfin_write_CAN0_MB15_DATA2(val)		bfin_write16(CAN0_MB15_DATA2, val)
+#define bfin_read_CAN0_MB15_DATA3()		bfin_read16(CAN0_MB15_DATA3)
+#define bfin_write_CAN0_MB15_DATA3(val)		bfin_write16(CAN0_MB15_DATA3, val)
+#define bfin_read_CAN0_MB15_LENGTH()		bfin_read16(CAN0_MB15_LENGTH)
+#define bfin_write_CAN0_MB15_LENGTH(val)	bfin_write16(CAN0_MB15_LENGTH, val)
+#define bfin_read_CAN0_MB15_TIMESTAMP()		bfin_read16(CAN0_MB15_TIMESTAMP)
+#define bfin_write_CAN0_MB15_TIMESTAMP(val)	bfin_write16(CAN0_MB15_TIMESTAMP, val)
+#define bfin_read_CAN0_MB15_ID0()		bfin_read16(CAN0_MB15_ID0)
+#define bfin_write_CAN0_MB15_ID0(val)		bfin_write16(CAN0_MB15_ID0, val)
+#define bfin_read_CAN0_MB15_ID1()		bfin_read16(CAN0_MB15_ID1)
+#define bfin_write_CAN0_MB15_ID1(val)		bfin_write16(CAN0_MB15_ID1, val)
+
+/* CAN Controller 0 Mailbox Data Registers */
+
+#define bfin_read_CAN0_MB16_DATA0()		bfin_read16(CAN0_MB16_DATA0)
+#define bfin_write_CAN0_MB16_DATA0(val)		bfin_write16(CAN0_MB16_DATA0, val)
+#define bfin_read_CAN0_MB16_DATA1()		bfin_read16(CAN0_MB16_DATA1)
+#define bfin_write_CAN0_MB16_DATA1(val)		bfin_write16(CAN0_MB16_DATA1, val)
+#define bfin_read_CAN0_MB16_DATA2()		bfin_read16(CAN0_MB16_DATA2)
+#define bfin_write_CAN0_MB16_DATA2(val)		bfin_write16(CAN0_MB16_DATA2, val)
+#define bfin_read_CAN0_MB16_DATA3()		bfin_read16(CAN0_MB16_DATA3)
+#define bfin_write_CAN0_MB16_DATA3(val)		bfin_write16(CAN0_MB16_DATA3, val)
+#define bfin_read_CAN0_MB16_LENGTH()		bfin_read16(CAN0_MB16_LENGTH)
+#define bfin_write_CAN0_MB16_LENGTH(val)	bfin_write16(CAN0_MB16_LENGTH, val)
+#define bfin_read_CAN0_MB16_TIMESTAMP()		bfin_read16(CAN0_MB16_TIMESTAMP)
+#define bfin_write_CAN0_MB16_TIMESTAMP(val)	bfin_write16(CAN0_MB16_TIMESTAMP, val)
+#define bfin_read_CAN0_MB16_ID0()		bfin_read16(CAN0_MB16_ID0)
+#define bfin_write_CAN0_MB16_ID0(val)		bfin_write16(CAN0_MB16_ID0, val)
+#define bfin_read_CAN0_MB16_ID1()		bfin_read16(CAN0_MB16_ID1)
+#define bfin_write_CAN0_MB16_ID1(val)		bfin_write16(CAN0_MB16_ID1, val)
+#define bfin_read_CAN0_MB17_DATA0()		bfin_read16(CAN0_MB17_DATA0)
+#define bfin_write_CAN0_MB17_DATA0(val)		bfin_write16(CAN0_MB17_DATA0, val)
+#define bfin_read_CAN0_MB17_DATA1()		bfin_read16(CAN0_MB17_DATA1)
+#define bfin_write_CAN0_MB17_DATA1(val)		bfin_write16(CAN0_MB17_DATA1, val)
+#define bfin_read_CAN0_MB17_DATA2()		bfin_read16(CAN0_MB17_DATA2)
+#define bfin_write_CAN0_MB17_DATA2(val)		bfin_write16(CAN0_MB17_DATA2, val)
+#define bfin_read_CAN0_MB17_DATA3()		bfin_read16(CAN0_MB17_DATA3)
+#define bfin_write_CAN0_MB17_DATA3(val)		bfin_write16(CAN0_MB17_DATA3, val)
+#define bfin_read_CAN0_MB17_LENGTH()		bfin_read16(CAN0_MB17_LENGTH)
+#define bfin_write_CAN0_MB17_LENGTH(val)	bfin_write16(CAN0_MB17_LENGTH, val)
+#define bfin_read_CAN0_MB17_TIMESTAMP()		bfin_read16(CAN0_MB17_TIMESTAMP)
+#define bfin_write_CAN0_MB17_TIMESTAMP(val)	bfin_write16(CAN0_MB17_TIMESTAMP, val)
+#define bfin_read_CAN0_MB17_ID0()		bfin_read16(CAN0_MB17_ID0)
+#define bfin_write_CAN0_MB17_ID0(val)		bfin_write16(CAN0_MB17_ID0, val)
+#define bfin_read_CAN0_MB17_ID1()		bfin_read16(CAN0_MB17_ID1)
+#define bfin_write_CAN0_MB17_ID1(val)		bfin_write16(CAN0_MB17_ID1, val)
+#define bfin_read_CAN0_MB18_DATA0()		bfin_read16(CAN0_MB18_DATA0)
+#define bfin_write_CAN0_MB18_DATA0(val)		bfin_write16(CAN0_MB18_DATA0, val)
+#define bfin_read_CAN0_MB18_DATA1()		bfin_read16(CAN0_MB18_DATA1)
+#define bfin_write_CAN0_MB18_DATA1(val)		bfin_write16(CAN0_MB18_DATA1, val)
+#define bfin_read_CAN0_MB18_DATA2()		bfin_read16(CAN0_MB18_DATA2)
+#define bfin_write_CAN0_MB18_DATA2(val)		bfin_write16(CAN0_MB18_DATA2, val)
+#define bfin_read_CAN0_MB18_DATA3()		bfin_read16(CAN0_MB18_DATA3)
+#define bfin_write_CAN0_MB18_DATA3(val)		bfin_write16(CAN0_MB18_DATA3, val)
+#define bfin_read_CAN0_MB18_LENGTH()		bfin_read16(CAN0_MB18_LENGTH)
+#define bfin_write_CAN0_MB18_LENGTH(val)	bfin_write16(CAN0_MB18_LENGTH, val)
+#define bfin_read_CAN0_MB18_TIMESTAMP()		bfin_read16(CAN0_MB18_TIMESTAMP)
+#define bfin_write_CAN0_MB18_TIMESTAMP(val)	bfin_write16(CAN0_MB18_TIMESTAMP, val)
+#define bfin_read_CAN0_MB18_ID0()		bfin_read16(CAN0_MB18_ID0)
+#define bfin_write_CAN0_MB18_ID0(val)		bfin_write16(CAN0_MB18_ID0, val)
+#define bfin_read_CAN0_MB18_ID1()		bfin_read16(CAN0_MB18_ID1)
+#define bfin_write_CAN0_MB18_ID1(val)		bfin_write16(CAN0_MB18_ID1, val)
+#define bfin_read_CAN0_MB19_DATA0()		bfin_read16(CAN0_MB19_DATA0)
+#define bfin_write_CAN0_MB19_DATA0(val)		bfin_write16(CAN0_MB19_DATA0, val)
+#define bfin_read_CAN0_MB19_DATA1()		bfin_read16(CAN0_MB19_DATA1)
+#define bfin_write_CAN0_MB19_DATA1(val)		bfin_write16(CAN0_MB19_DATA1, val)
+#define bfin_read_CAN0_MB19_DATA2()		bfin_read16(CAN0_MB19_DATA2)
+#define bfin_write_CAN0_MB19_DATA2(val)		bfin_write16(CAN0_MB19_DATA2, val)
+#define bfin_read_CAN0_MB19_DATA3()		bfin_read16(CAN0_MB19_DATA3)
+#define bfin_write_CAN0_MB19_DATA3(val)		bfin_write16(CAN0_MB19_DATA3, val)
+#define bfin_read_CAN0_MB19_LENGTH()		bfin_read16(CAN0_MB19_LENGTH)
+#define bfin_write_CAN0_MB19_LENGTH(val)	bfin_write16(CAN0_MB19_LENGTH, val)
+#define bfin_read_CAN0_MB19_TIMESTAMP()		bfin_read16(CAN0_MB19_TIMESTAMP)
+#define bfin_write_CAN0_MB19_TIMESTAMP(val)	bfin_write16(CAN0_MB19_TIMESTAMP, val)
+#define bfin_read_CAN0_MB19_ID0()		bfin_read16(CAN0_MB19_ID0)
+#define bfin_write_CAN0_MB19_ID0(val)		bfin_write16(CAN0_MB19_ID0, val)
+#define bfin_read_CAN0_MB19_ID1()		bfin_read16(CAN0_MB19_ID1)
+#define bfin_write_CAN0_MB19_ID1(val)		bfin_write16(CAN0_MB19_ID1, val)
+#define bfin_read_CAN0_MB20_DATA0()		bfin_read16(CAN0_MB20_DATA0)
+#define bfin_write_CAN0_MB20_DATA0(val)		bfin_write16(CAN0_MB20_DATA0, val)
+#define bfin_read_CAN0_MB20_DATA1()		bfin_read16(CAN0_MB20_DATA1)
+#define bfin_write_CAN0_MB20_DATA1(val)		bfin_write16(CAN0_MB20_DATA1, val)
+#define bfin_read_CAN0_MB20_DATA2()		bfin_read16(CAN0_MB20_DATA2)
+#define bfin_write_CAN0_MB20_DATA2(val)		bfin_write16(CAN0_MB20_DATA2, val)
+#define bfin_read_CAN0_MB20_DATA3()		bfin_read16(CAN0_MB20_DATA3)
+#define bfin_write_CAN0_MB20_DATA3(val)		bfin_write16(CAN0_MB20_DATA3, val)
+#define bfin_read_CAN0_MB20_LENGTH()		bfin_read16(CAN0_MB20_LENGTH)
+#define bfin_write_CAN0_MB20_LENGTH(val)	bfin_write16(CAN0_MB20_LENGTH, val)
+#define bfin_read_CAN0_MB20_TIMESTAMP()		bfin_read16(CAN0_MB20_TIMESTAMP)
+#define bfin_write_CAN0_MB20_TIMESTAMP(val)	bfin_write16(CAN0_MB20_TIMESTAMP, val)
+#define bfin_read_CAN0_MB20_ID0()		bfin_read16(CAN0_MB20_ID0)
+#define bfin_write_CAN0_MB20_ID0(val)		bfin_write16(CAN0_MB20_ID0, val)
+#define bfin_read_CAN0_MB20_ID1()		bfin_read16(CAN0_MB20_ID1)
+#define bfin_write_CAN0_MB20_ID1(val)		bfin_write16(CAN0_MB20_ID1, val)
+#define bfin_read_CAN0_MB21_DATA0()		bfin_read16(CAN0_MB21_DATA0)
+#define bfin_write_CAN0_MB21_DATA0(val)		bfin_write16(CAN0_MB21_DATA0, val)
+#define bfin_read_CAN0_MB21_DATA1()		bfin_read16(CAN0_MB21_DATA1)
+#define bfin_write_CAN0_MB21_DATA1(val)		bfin_write16(CAN0_MB21_DATA1, val)
+#define bfin_read_CAN0_MB21_DATA2()		bfin_read16(CAN0_MB21_DATA2)
+#define bfin_write_CAN0_MB21_DATA2(val)		bfin_write16(CAN0_MB21_DATA2, val)
+#define bfin_read_CAN0_MB21_DATA3()		bfin_read16(CAN0_MB21_DATA3)
+#define bfin_write_CAN0_MB21_DATA3(val)		bfin_write16(CAN0_MB21_DATA3, val)
+#define bfin_read_CAN0_MB21_LENGTH()		bfin_read16(CAN0_MB21_LENGTH)
+#define bfin_write_CAN0_MB21_LENGTH(val)	bfin_write16(CAN0_MB21_LENGTH, val)
+#define bfin_read_CAN0_MB21_TIMESTAMP()		bfin_read16(CAN0_MB21_TIMESTAMP)
+#define bfin_write_CAN0_MB21_TIMESTAMP(val)	bfin_write16(CAN0_MB21_TIMESTAMP, val)
+#define bfin_read_CAN0_MB21_ID0()		bfin_read16(CAN0_MB21_ID0)
+#define bfin_write_CAN0_MB21_ID0(val)		bfin_write16(CAN0_MB21_ID0, val)
+#define bfin_read_CAN0_MB21_ID1()		bfin_read16(CAN0_MB21_ID1)
+#define bfin_write_CAN0_MB21_ID1(val)		bfin_write16(CAN0_MB21_ID1, val)
+#define bfin_read_CAN0_MB22_DATA0()		bfin_read16(CAN0_MB22_DATA0)
+#define bfin_write_CAN0_MB22_DATA0(val)		bfin_write16(CAN0_MB22_DATA0, val)
+#define bfin_read_CAN0_MB22_DATA1()		bfin_read16(CAN0_MB22_DATA1)
+#define bfin_write_CAN0_MB22_DATA1(val)		bfin_write16(CAN0_MB22_DATA1, val)
+#define bfin_read_CAN0_MB22_DATA2()		bfin_read16(CAN0_MB22_DATA2)
+#define bfin_write_CAN0_MB22_DATA2(val)		bfin_write16(CAN0_MB22_DATA2, val)
+#define bfin_read_CAN0_MB22_DATA3()		bfin_read16(CAN0_MB22_DATA3)
+#define bfin_write_CAN0_MB22_DATA3(val)		bfin_write16(CAN0_MB22_DATA3, val)
+#define bfin_read_CAN0_MB22_LENGTH()		bfin_read16(CAN0_MB22_LENGTH)
+#define bfin_write_CAN0_MB22_LENGTH(val)	bfin_write16(CAN0_MB22_LENGTH, val)
+#define bfin_read_CAN0_MB22_TIMESTAMP()		bfin_read16(CAN0_MB22_TIMESTAMP)
+#define bfin_write_CAN0_MB22_TIMESTAMP(val)	bfin_write16(CAN0_MB22_TIMESTAMP, val)
+#define bfin_read_CAN0_MB22_ID0()		bfin_read16(CAN0_MB22_ID0)
+#define bfin_write_CAN0_MB22_ID0(val)		bfin_write16(CAN0_MB22_ID0, val)
+#define bfin_read_CAN0_MB22_ID1()		bfin_read16(CAN0_MB22_ID1)
+#define bfin_write_CAN0_MB22_ID1(val)		bfin_write16(CAN0_MB22_ID1, val)
+#define bfin_read_CAN0_MB23_DATA0()		bfin_read16(CAN0_MB23_DATA0)
+#define bfin_write_CAN0_MB23_DATA0(val)		bfin_write16(CAN0_MB23_DATA0, val)
+#define bfin_read_CAN0_MB23_DATA1()		bfin_read16(CAN0_MB23_DATA1)
+#define bfin_write_CAN0_MB23_DATA1(val)		bfin_write16(CAN0_MB23_DATA1, val)
+#define bfin_read_CAN0_MB23_DATA2()		bfin_read16(CAN0_MB23_DATA2)
+#define bfin_write_CAN0_MB23_DATA2(val)		bfin_write16(CAN0_MB23_DATA2, val)
+#define bfin_read_CAN0_MB23_DATA3()		bfin_read16(CAN0_MB23_DATA3)
+#define bfin_write_CAN0_MB23_DATA3(val)		bfin_write16(CAN0_MB23_DATA3, val)
+#define bfin_read_CAN0_MB23_LENGTH()		bfin_read16(CAN0_MB23_LENGTH)
+#define bfin_write_CAN0_MB23_LENGTH(val)	bfin_write16(CAN0_MB23_LENGTH, val)
+#define bfin_read_CAN0_MB23_TIMESTAMP()		bfin_read16(CAN0_MB23_TIMESTAMP)
+#define bfin_write_CAN0_MB23_TIMESTAMP(val)	bfin_write16(CAN0_MB23_TIMESTAMP, val)
+#define bfin_read_CAN0_MB23_ID0()		bfin_read16(CAN0_MB23_ID0)
+#define bfin_write_CAN0_MB23_ID0(val)		bfin_write16(CAN0_MB23_ID0, val)
+#define bfin_read_CAN0_MB23_ID1()		bfin_read16(CAN0_MB23_ID1)
+#define bfin_write_CAN0_MB23_ID1(val)		bfin_write16(CAN0_MB23_ID1, val)
+#define bfin_read_CAN0_MB24_DATA0()		bfin_read16(CAN0_MB24_DATA0)
+#define bfin_write_CAN0_MB24_DATA0(val)		bfin_write16(CAN0_MB24_DATA0, val)
+#define bfin_read_CAN0_MB24_DATA1()		bfin_read16(CAN0_MB24_DATA1)
+#define bfin_write_CAN0_MB24_DATA1(val)		bfin_write16(CAN0_MB24_DATA1, val)
+#define bfin_read_CAN0_MB24_DATA2()		bfin_read16(CAN0_MB24_DATA2)
+#define bfin_write_CAN0_MB24_DATA2(val)		bfin_write16(CAN0_MB24_DATA2, val)
+#define bfin_read_CAN0_MB24_DATA3()		bfin_read16(CAN0_MB24_DATA3)
+#define bfin_write_CAN0_MB24_DATA3(val)		bfin_write16(CAN0_MB24_DATA3, val)
+#define bfin_read_CAN0_MB24_LENGTH()		bfin_read16(CAN0_MB24_LENGTH)
+#define bfin_write_CAN0_MB24_LENGTH(val)	bfin_write16(CAN0_MB24_LENGTH, val)
+#define bfin_read_CAN0_MB24_TIMESTAMP()		bfin_read16(CAN0_MB24_TIMESTAMP)
+#define bfin_write_CAN0_MB24_TIMESTAMP(val)	bfin_write16(CAN0_MB24_TIMESTAMP, val)
+#define bfin_read_CAN0_MB24_ID0()		bfin_read16(CAN0_MB24_ID0)
+#define bfin_write_CAN0_MB24_ID0(val)		bfin_write16(CAN0_MB24_ID0, val)
+#define bfin_read_CAN0_MB24_ID1()		bfin_read16(CAN0_MB24_ID1)
+#define bfin_write_CAN0_MB24_ID1(val)		bfin_write16(CAN0_MB24_ID1, val)
+#define bfin_read_CAN0_MB25_DATA0()		bfin_read16(CAN0_MB25_DATA0)
+#define bfin_write_CAN0_MB25_DATA0(val)		bfin_write16(CAN0_MB25_DATA0, val)
+#define bfin_read_CAN0_MB25_DATA1()		bfin_read16(CAN0_MB25_DATA1)
+#define bfin_write_CAN0_MB25_DATA1(val)		bfin_write16(CAN0_MB25_DATA1, val)
+#define bfin_read_CAN0_MB25_DATA2()		bfin_read16(CAN0_MB25_DATA2)
+#define bfin_write_CAN0_MB25_DATA2(val)		bfin_write16(CAN0_MB25_DATA2, val)
+#define bfin_read_CAN0_MB25_DATA3()		bfin_read16(CAN0_MB25_DATA3)
+#define bfin_write_CAN0_MB25_DATA3(val)		bfin_write16(CAN0_MB25_DATA3, val)
+#define bfin_read_CAN0_MB25_LENGTH()		bfin_read16(CAN0_MB25_LENGTH)
+#define bfin_write_CAN0_MB25_LENGTH(val)	bfin_write16(CAN0_MB25_LENGTH, val)
+#define bfin_read_CAN0_MB25_TIMESTAMP()		bfin_read16(CAN0_MB25_TIMESTAMP)
+#define bfin_write_CAN0_MB25_TIMESTAMP(val)	bfin_write16(CAN0_MB25_TIMESTAMP, val)
+#define bfin_read_CAN0_MB25_ID0()		bfin_read16(CAN0_MB25_ID0)
+#define bfin_write_CAN0_MB25_ID0(val)		bfin_write16(CAN0_MB25_ID0, val)
+#define bfin_read_CAN0_MB25_ID1()		bfin_read16(CAN0_MB25_ID1)
+#define bfin_write_CAN0_MB25_ID1(val)		bfin_write16(CAN0_MB25_ID1, val)
+#define bfin_read_CAN0_MB26_DATA0()		bfin_read16(CAN0_MB26_DATA0)
+#define bfin_write_CAN0_MB26_DATA0(val)		bfin_write16(CAN0_MB26_DATA0, val)
+#define bfin_read_CAN0_MB26_DATA1()		bfin_read16(CAN0_MB26_DATA1)
+#define bfin_write_CAN0_MB26_DATA1(val)		bfin_write16(CAN0_MB26_DATA1, val)
+#define bfin_read_CAN0_MB26_DATA2()		bfin_read16(CAN0_MB26_DATA2)
+#define bfin_write_CAN0_MB26_DATA2(val)		bfin_write16(CAN0_MB26_DATA2, val)
+#define bfin_read_CAN0_MB26_DATA3()		bfin_read16(CAN0_MB26_DATA3)
+#define bfin_write_CAN0_MB26_DATA3(val)		bfin_write16(CAN0_MB26_DATA3, val)
+#define bfin_read_CAN0_MB26_LENGTH()		bfin_read16(CAN0_MB26_LENGTH)
+#define bfin_write_CAN0_MB26_LENGTH(val)	bfin_write16(CAN0_MB26_LENGTH, val)
+#define bfin_read_CAN0_MB26_TIMESTAMP()		bfin_read16(CAN0_MB26_TIMESTAMP)
+#define bfin_write_CAN0_MB26_TIMESTAMP(val)	bfin_write16(CAN0_MB26_TIMESTAMP, val)
+#define bfin_read_CAN0_MB26_ID0()		bfin_read16(CAN0_MB26_ID0)
+#define bfin_write_CAN0_MB26_ID0(val)		bfin_write16(CAN0_MB26_ID0, val)
+#define bfin_read_CAN0_MB26_ID1()		bfin_read16(CAN0_MB26_ID1)
+#define bfin_write_CAN0_MB26_ID1(val)		bfin_write16(CAN0_MB26_ID1, val)
+#define bfin_read_CAN0_MB27_DATA0()		bfin_read16(CAN0_MB27_DATA0)
+#define bfin_write_CAN0_MB27_DATA0(val)		bfin_write16(CAN0_MB27_DATA0, val)
+#define bfin_read_CAN0_MB27_DATA1()		bfin_read16(CAN0_MB27_DATA1)
+#define bfin_write_CAN0_MB27_DATA1(val)		bfin_write16(CAN0_MB27_DATA1, val)
+#define bfin_read_CAN0_MB27_DATA2()		bfin_read16(CAN0_MB27_DATA2)
+#define bfin_write_CAN0_MB27_DATA2(val)		bfin_write16(CAN0_MB27_DATA2, val)
+#define bfin_read_CAN0_MB27_DATA3()		bfin_read16(CAN0_MB27_DATA3)
+#define bfin_write_CAN0_MB27_DATA3(val)		bfin_write16(CAN0_MB27_DATA3, val)
+#define bfin_read_CAN0_MB27_LENGTH()		bfin_read16(CAN0_MB27_LENGTH)
+#define bfin_write_CAN0_MB27_LENGTH(val)	bfin_write16(CAN0_MB27_LENGTH, val)
+#define bfin_read_CAN0_MB27_TIMESTAMP()		bfin_read16(CAN0_MB27_TIMESTAMP)
+#define bfin_write_CAN0_MB27_TIMESTAMP(val)	bfin_write16(CAN0_MB27_TIMESTAMP, val)
+#define bfin_read_CAN0_MB27_ID0()		bfin_read16(CAN0_MB27_ID0)
+#define bfin_write_CAN0_MB27_ID0(val)		bfin_write16(CAN0_MB27_ID0, val)
+#define bfin_read_CAN0_MB27_ID1()		bfin_read16(CAN0_MB27_ID1)
+#define bfin_write_CAN0_MB27_ID1(val)		bfin_write16(CAN0_MB27_ID1, val)
+#define bfin_read_CAN0_MB28_DATA0()		bfin_read16(CAN0_MB28_DATA0)
+#define bfin_write_CAN0_MB28_DATA0(val)		bfin_write16(CAN0_MB28_DATA0, val)
+#define bfin_read_CAN0_MB28_DATA1()		bfin_read16(CAN0_MB28_DATA1)
+#define bfin_write_CAN0_MB28_DATA1(val)		bfin_write16(CAN0_MB28_DATA1, val)
+#define bfin_read_CAN0_MB28_DATA2()		bfin_read16(CAN0_MB28_DATA2)
+#define bfin_write_CAN0_MB28_DATA2(val)		bfin_write16(CAN0_MB28_DATA2, val)
+#define bfin_read_CAN0_MB28_DATA3()		bfin_read16(CAN0_MB28_DATA3)
+#define bfin_write_CAN0_MB28_DATA3(val)		bfin_write16(CAN0_MB28_DATA3, val)
+#define bfin_read_CAN0_MB28_LENGTH()		bfin_read16(CAN0_MB28_LENGTH)
+#define bfin_write_CAN0_MB28_LENGTH(val)	bfin_write16(CAN0_MB28_LENGTH, val)
+#define bfin_read_CAN0_MB28_TIMESTAMP()		bfin_read16(CAN0_MB28_TIMESTAMP)
+#define bfin_write_CAN0_MB28_TIMESTAMP(val)	bfin_write16(CAN0_MB28_TIMESTAMP, val)
+#define bfin_read_CAN0_MB28_ID0()		bfin_read16(CAN0_MB28_ID0)
+#define bfin_write_CAN0_MB28_ID0(val)		bfin_write16(CAN0_MB28_ID0, val)
+#define bfin_read_CAN0_MB28_ID1()		bfin_read16(CAN0_MB28_ID1)
+#define bfin_write_CAN0_MB28_ID1(val)		bfin_write16(CAN0_MB28_ID1, val)
+#define bfin_read_CAN0_MB29_DATA0()		bfin_read16(CAN0_MB29_DATA0)
+#define bfin_write_CAN0_MB29_DATA0(val)		bfin_write16(CAN0_MB29_DATA0, val)
+#define bfin_read_CAN0_MB29_DATA1()		bfin_read16(CAN0_MB29_DATA1)
+#define bfin_write_CAN0_MB29_DATA1(val)		bfin_write16(CAN0_MB29_DATA1, val)
+#define bfin_read_CAN0_MB29_DATA2()		bfin_read16(CAN0_MB29_DATA2)
+#define bfin_write_CAN0_MB29_DATA2(val)		bfin_write16(CAN0_MB29_DATA2, val)
+#define bfin_read_CAN0_MB29_DATA3()		bfin_read16(CAN0_MB29_DATA3)
+#define bfin_write_CAN0_MB29_DATA3(val)		bfin_write16(CAN0_MB29_DATA3, val)
+#define bfin_read_CAN0_MB29_LENGTH()		bfin_read16(CAN0_MB29_LENGTH)
+#define bfin_write_CAN0_MB29_LENGTH(val)	bfin_write16(CAN0_MB29_LENGTH, val)
+#define bfin_read_CAN0_MB29_TIMESTAMP()		bfin_read16(CAN0_MB29_TIMESTAMP)
+#define bfin_write_CAN0_MB29_TIMESTAMP(val)	bfin_write16(CAN0_MB29_TIMESTAMP, val)
+#define bfin_read_CAN0_MB29_ID0()		bfin_read16(CAN0_MB29_ID0)
+#define bfin_write_CAN0_MB29_ID0(val)		bfin_write16(CAN0_MB29_ID0, val)
+#define bfin_read_CAN0_MB29_ID1()		bfin_read16(CAN0_MB29_ID1)
+#define bfin_write_CAN0_MB29_ID1(val)		bfin_write16(CAN0_MB29_ID1, val)
+#define bfin_read_CAN0_MB30_DATA0()		bfin_read16(CAN0_MB30_DATA0)
+#define bfin_write_CAN0_MB30_DATA0(val)		bfin_write16(CAN0_MB30_DATA0, val)
+#define bfin_read_CAN0_MB30_DATA1()		bfin_read16(CAN0_MB30_DATA1)
+#define bfin_write_CAN0_MB30_DATA1(val)		bfin_write16(CAN0_MB30_DATA1, val)
+#define bfin_read_CAN0_MB30_DATA2()		bfin_read16(CAN0_MB30_DATA2)
+#define bfin_write_CAN0_MB30_DATA2(val)		bfin_write16(CAN0_MB30_DATA2, val)
+#define bfin_read_CAN0_MB30_DATA3()		bfin_read16(CAN0_MB30_DATA3)
+#define bfin_write_CAN0_MB30_DATA3(val)		bfin_write16(CAN0_MB30_DATA3, val)
+#define bfin_read_CAN0_MB30_LENGTH()		bfin_read16(CAN0_MB30_LENGTH)
+#define bfin_write_CAN0_MB30_LENGTH(val)	bfin_write16(CAN0_MB30_LENGTH, val)
+#define bfin_read_CAN0_MB30_TIMESTAMP()		bfin_read16(CAN0_MB30_TIMESTAMP)
+#define bfin_write_CAN0_MB30_TIMESTAMP(val)	bfin_write16(CAN0_MB30_TIMESTAMP, val)
+#define bfin_read_CAN0_MB30_ID0()		bfin_read16(CAN0_MB30_ID0)
+#define bfin_write_CAN0_MB30_ID0(val)		bfin_write16(CAN0_MB30_ID0, val)
+#define bfin_read_CAN0_MB30_ID1()		bfin_read16(CAN0_MB30_ID1)
+#define bfin_write_CAN0_MB30_ID1(val)		bfin_write16(CAN0_MB30_ID1, val)
+#define bfin_read_CAN0_MB31_DATA0()		bfin_read16(CAN0_MB31_DATA0)
+#define bfin_write_CAN0_MB31_DATA0(val)		bfin_write16(CAN0_MB31_DATA0, val)
+#define bfin_read_CAN0_MB31_DATA1()		bfin_read16(CAN0_MB31_DATA1)
+#define bfin_write_CAN0_MB31_DATA1(val)		bfin_write16(CAN0_MB31_DATA1, val)
+#define bfin_read_CAN0_MB31_DATA2()		bfin_read16(CAN0_MB31_DATA2)
+#define bfin_write_CAN0_MB31_DATA2(val)		bfin_write16(CAN0_MB31_DATA2, val)
+#define bfin_read_CAN0_MB31_DATA3()		bfin_read16(CAN0_MB31_DATA3)
+#define bfin_write_CAN0_MB31_DATA3(val)		bfin_write16(CAN0_MB31_DATA3, val)
+#define bfin_read_CAN0_MB31_LENGTH()		bfin_read16(CAN0_MB31_LENGTH)
+#define bfin_write_CAN0_MB31_LENGTH(val)	bfin_write16(CAN0_MB31_LENGTH, val)
+#define bfin_read_CAN0_MB31_TIMESTAMP()		bfin_read16(CAN0_MB31_TIMESTAMP)
+#define bfin_write_CAN0_MB31_TIMESTAMP(val)	bfin_write16(CAN0_MB31_TIMESTAMP, val)
+#define bfin_read_CAN0_MB31_ID0()		bfin_read16(CAN0_MB31_ID0)
+#define bfin_write_CAN0_MB31_ID0(val)		bfin_write16(CAN0_MB31_ID0, val)
+#define bfin_read_CAN0_MB31_ID1()		bfin_read16(CAN0_MB31_ID1)
+#define bfin_write_CAN0_MB31_ID1(val)		bfin_write16(CAN0_MB31_ID1, val)
+
+/* Counter Registers */
+
+#define bfin_read_CNT_CONFIG()		bfin_read16(CNT_CONFIG)
+#define bfin_write_CNT_CONFIG(val)	bfin_write16(CNT_CONFIG, val)
+#define bfin_read_CNT_IMASK()		bfin_read16(CNT_IMASK)
+#define bfin_write_CNT_IMASK(val)	bfin_write16(CNT_IMASK, val)
+#define bfin_read_CNT_STATUS()		bfin_read16(CNT_STATUS)
+#define bfin_write_CNT_STATUS(val)	bfin_write16(CNT_STATUS, val)
+#define bfin_read_CNT_COMMAND()		bfin_read16(CNT_COMMAND)
+#define bfin_write_CNT_COMMAND(val)	bfin_write16(CNT_COMMAND, val)
+#define bfin_read_CNT_DEBOUNCE()	bfin_read16(CNT_DEBOUNCE)
+#define bfin_write_CNT_DEBOUNCE(val)	bfin_write16(CNT_DEBOUNCE, val)
+#define bfin_read_CNT_COUNTER()		bfin_read32(CNT_COUNTER)
+#define bfin_write_CNT_COUNTER(val)	bfin_write32(CNT_COUNTER, val)
+#define bfin_read_CNT_MAX()		bfin_read32(CNT_MAX)
+#define bfin_write_CNT_MAX(val)		bfin_write32(CNT_MAX, val)
+#define bfin_read_CNT_MIN()		bfin_read32(CNT_MIN)
+#define bfin_write_CNT_MIN(val)		bfin_write32(CNT_MIN, val)
+
+/* RSI Register */
+#define bfin_read_RSI_CLK_CTL()		bfin_read16(RSI_CLK_CONTROL)
+#define bfin_write_RSI_CLK_CTL(val)	bfin_write16(RSI_CLK_CONTROL, val)
+#define bfin_read_RSI_ARGUMENT()	bfin_read32(RSI_ARGUMENT)
+#define bfin_write_RSI_ARGUMENT(val)	bfin_write32(RSI_ARGUMENT, val)
+#define bfin_read_RSI_COMMAND()		bfin_read16(RSI_COMMAND)
+#define bfin_write_RSI_COMMAND(val)	bfin_write16(RSI_COMMAND, val)
+#define bfin_read_RSI_RESP_CMD()	bfin_read16(RSI_RESP_CMD)
+#define bfin_write_RSI_RESP_CMD(val)	bfin_write16(RSI_RESP_CMD, val)
+#define bfin_read_RSI_RESPONSE0()	bfin_read32(RSI_RESPONSE0)
+#define bfin_write_RSI_RESPONSE0(val)	bfin_write32(RSI_RESPONSE0, val)
+#define bfin_read_RSI_RESPONSE1()	bfin_read32(RSI_RESPONSE1)
+#define bfin_write_RSI_RESPONSE1(val)	bfin_write32(RSI_RESPONSE1, val)
+#define bfin_read_RSI_RESPONSE2()	bfin_read32(RSI_RESPONSE2)
+#define bfin_write_RSI_RESPONSE2(val)	bfin_write32(RSI_RESPONSE2, val)
+#define bfin_read_RSI_RESPONSE3()	bfin_read32(RSI_RESPONSE3)
+#define bfin_write_RSI_RESPONSE3(val)	bfin_write32(RSI_RESPONSE3, val)
+#define bfin_read_RSI_DATA_TIMER()	bfin_read32(RSI_DATA_TIMER)
+#define bfin_write_RSI_DATA_TIMER(val)	bfin_write32(RSI_DATA_TIMER, val)
+#define bfin_read_RSI_DATA_LGTH()	bfin_read16(RSI_DATA_LGTH)
+#define bfin_write_RSI_DATA_LGTH(val)	bfin_write16(RSI_DATA_LGTH, val)
+#define bfin_read_RSI_DATA_CTL()	bfin_read16(RSI_DATA_CONTROL)
+#define bfin_write_RSI_DATA_CTL(val)	bfin_write16(RSI_DATA_CONTROL, val)
+#define bfin_read_RSI_DATA_CNT()	bfin_read16(RSI_DATA_CNT)
+#define bfin_write_RSI_DATA_CNT(val)	bfin_write16(RSI_DATA_CNT, val)
+#define bfin_read_RSI_STATUS()		bfin_read32(RSI_STATUS)
+#define bfin_write_RSI_STATUS(val)	bfin_write32(RSI_STATUS, val)
+#define bfin_read_RSI_STATUS_CLR()	bfin_read16(RSI_STATUSCL)
+#define bfin_write_RSI_STATUS_CLR(val)	bfin_write16(RSI_STATUSCL, val)
+#define bfin_read_RSI_MASK0()		bfin_read32(RSI_MASK0)
+#define bfin_write_RSI_MASK0(val)	bfin_write32(RSI_MASK0, val)
+#define bfin_read_RSI_MASK1()		bfin_read32(RSI_MASK1)
+#define bfin_write_RSI_MASK1(val)	bfin_write32(RSI_MASK1, val)
+#define bfin_read_RSI_FIFO_CNT()	bfin_read16(RSI_FIFO_CNT)
+#define bfin_write_RSI_FIFO_CNT(val)	bfin_write16(RSI_FIFO_CNT, val)
+#define bfin_read_RSI_CEATA_CONTROL()	bfin_read16(RSI_CEATA_CONTROL)
+#define bfin_write_RSI_CEATA_CONTROL(val)	bfin_write16(RSI_CEATA_CONTROL, val)
+#define bfin_read_RSI_BLKSZ()		bfin_read16(RSI_BLKSZ)
+#define bfin_write_RSI_BLKSZ(val)	bfin_write16(RSI_BLKSZ, val)
+#define bfin_read_RSI_FIFO()		bfin_read32(RSI_FIFO)
+#define bfin_write_RSI_FIFO(val)	bfin_write32(RSI_FIFO, val)
+#define bfin_read_RSI_E_STATUS()	bfin_read32(RSI_ESTAT)
+#define bfin_write_RSI_E_STATUS(val)	bfin_write32(RSI_ESTAT, val)
+#define bfin_read_RSI_E_MASK()		bfin_read32(RSI_EMASK)
+#define bfin_write_RSI_E_MASK(val)	bfin_write32(RSI_EMASK, val)
+#define bfin_read_RSI_CFG()		bfin_read16(RSI_CONFIG)
+#define bfin_write_RSI_CFG(val)		bfin_write16(RSI_CONFIG, val)
+#define bfin_read_RSI_RD_WAIT_EN()	bfin_read16(RSI_RD_WAIT_EN)
+#define bfin_write_RSI_RD_WAIT_EN(val)	bfin_write16(RSI_RD_WAIT_EN, val)
+#define bfin_read_RSI_PID0()		bfin_read16(RSI_PID0)
+#define bfin_write_RSI_PID0(val)	bfin_write16(RSI_PID0, val)
+#define bfin_read_RSI_PID1()		bfin_read16(RSI_PID1)
+#define bfin_write_RSI_PID1(val)	bfin_write16(RSI_PID1, val)
+#define bfin_read_RSI_PID2()		bfin_read16(RSI_PID2)
+#define bfin_write_RSI_PID2(val)	bfin_write16(RSI_PID2, val)
+#define bfin_read_RSI_PID3()		bfin_read16(RSI_PID3)
+#define bfin_write_RSI_PID3(val)	bfin_write16(RSI_PID3, val)
+
+/* usb register */
+#define bfin_read_USB_PLLOSC_CTRL()    bfin_read16(USB_PLL_OSC)
+#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLL_OSC, val)
+#define bfin_write_USB_VBUS_CTL(val) bfin_write8(USB_VBUS_CTL, val)
+#define bfin_write_USB_APHY_CNTRL(val) bfin_write8(USB_PHY_CTL, val)
+#define bfin_read_USB_APHY_CNTRL() bfin_read8(USB_PHY_CTL)
+
+#endif /* _CDEF_BF60X_H */
+
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/defBF609.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/defBF609.h
new file mode 100644
index 0000000..8045ade
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/defBF609.h
@@ -0,0 +1,286 @@
+/*
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF609_H
+#define _DEF_BF609_H
+
+/* Include defBF60x_base.h for the set of #defines that are common to all ADSP-BF60x processors */
+#include "defBF60x_base.h"
+
+/* The following are the #defines needed by ADSP-BF609 that are not in the common header */
+/* =========================
+	PIXC Registers
+   ========================= */
+
+/* =========================
+	PIXC0
+   ========================= */
+#define PIXC0_CTL                   0xFFC19000         /* PIXC0 Control Register */
+#define PIXC0_PPL                   0xFFC19004         /* PIXC0 Pixels Per Line Register */
+#define PIXC0_LPF                   0xFFC19008         /* PIXC0 Line Per Frame Register */
+#define PIXC0_HSTART_A              0xFFC1900C         /* PIXC0 Overlay A Horizontal Start Register */
+#define PIXC0_HEND_A                0xFFC19010         /* PIXC0 Overlay A Horizontal End Register */
+#define PIXC0_VSTART_A              0xFFC19014         /* PIXC0 Overlay A Vertical Start Register */
+#define PIXC0_VEND_A                0xFFC19018         /* PIXC0 Overlay A Vertical End Register */
+#define PIXC0_TRANSP_A              0xFFC1901C         /* PIXC0 Overlay A Transparency Ratio Register */
+#define PIXC0_HSTART_B              0xFFC19020         /* PIXC0 Overlay B Horizontal Start Register */
+#define PIXC0_HEND_B                0xFFC19024         /* PIXC0 Overlay B Horizontal End Register */
+#define PIXC0_VSTART_B              0xFFC19028         /* PIXC0 Overlay B Vertical Start Register */
+#define PIXC0_VEND_B                0xFFC1902C         /* PIXC0 Overlay B Vertical End Register */
+#define PIXC0_TRANSP_B              0xFFC19030         /* PIXC0 Overlay B Transparency Ratio Register */
+#define PIXC0_IRQSTAT               0xFFC1903C         /* PIXC0 Interrupt Status Register */
+#define PIXC0_CONRY                 0xFFC19040         /* PIXC0 RY Conversion Component Register */
+#define PIXC0_CONGU                 0xFFC19044         /* PIXC0 GU Conversion Component Register */
+#define PIXC0_CONBV                 0xFFC19048         /* PIXC0 BV Conversion Component Register */
+#define PIXC0_CCBIAS                0xFFC1904C         /* PIXC0 Conversion Bias Register */
+#define PIXC0_TC                    0xFFC19050         /* PIXC0 Transparency Register */
+#define PIXC0_REVID                 0xFFC19054         /* PIXC0 PIXC Revision Id */
+
+/* =========================
+	PVP Registers
+   ========================= */
+
+/* =========================
+	PVP0
+   ========================= */
+#define PVP0_REVID                  0xFFC1A000         /* PVP0 Revision ID */
+#define PVP0_CTL                    0xFFC1A004         /* PVP0 Control */
+#define PVP0_IMSK0                  0xFFC1A008         /* PVP0 INTn interrupt line masks */
+#define PVP0_IMSK1                  0xFFC1A00C         /* PVP0 INTn interrupt line masks */
+#define PVP0_STAT                   0xFFC1A010         /* PVP0 Status */
+#define PVP0_ILAT                   0xFFC1A014         /* PVP0 Latched status */
+#define PVP0_IREQ0                  0xFFC1A018         /* PVP0 INT0 masked latched status */
+#define PVP0_IREQ1                  0xFFC1A01C         /* PVP0 INT0 masked latched status */
+#define PVP0_OPF0_CFG               0xFFC1A020         /* PVP0 Config */
+#define PVP0_OPF1_CFG               0xFFC1A040         /* PVP0 Config */
+#define PVP0_OPF2_CFG               0xFFC1A060         /* PVP0 Config */
+#define PVP0_OPF0_CTL               0xFFC1A024         /* PVP0 Control */
+#define PVP0_OPF1_CTL               0xFFC1A044         /* PVP0 Control */
+#define PVP0_OPF2_CTL               0xFFC1A064         /* PVP0 Control */
+#define PVP0_OPF3_CFG               0xFFC1A080         /* PVP0 Config */
+#define PVP0_OPF3_CTL               0xFFC1A084         /* PVP0 Control */
+#define PVP0_PEC_CFG                0xFFC1A0A0         /* PVP0 Config */
+#define PVP0_PEC_CTL                0xFFC1A0A4         /* PVP0 Control */
+#define PVP0_PEC_D1TH0              0xFFC1A0A8         /* PVP0 Lower Hysteresis Threshold */
+#define PVP0_PEC_D1TH1              0xFFC1A0AC         /* PVP0 Upper Hysteresis Threshold */
+#define PVP0_PEC_D2TH0              0xFFC1A0B0         /* PVP0 Weak Zero Crossing Threshold */
+#define PVP0_PEC_D2TH1              0xFFC1A0B4         /* PVP0 Strong Zero Crossing Threshold */
+#define PVP0_IIM0_CFG               0xFFC1A0C0         /* PVP0 Config */
+#define PVP0_IIM1_CFG               0xFFC1A0E0         /* PVP0 Config */
+#define PVP0_IIM0_CTL               0xFFC1A0C4         /* PVP0 Control */
+#define PVP0_IIM1_CTL               0xFFC1A0E4         /* PVP0 Control */
+#define PVP0_IIM0_SCALE             0xFFC1A0C8         /* PVP0 Scaler Values */
+#define PVP0_IIM1_SCALE             0xFFC1A0E8         /* PVP0 Scaler Values */
+#define PVP0_IIM0_SOVF_STAT         0xFFC1A0CC         /* PVP0 Signed Overflow Status */
+#define PVP0_IIM1_SOVF_STAT         0xFFC1A0EC         /* PVP0 Signed Overflow Status */
+#define PVP0_IIM0_UOVF_STAT         0xFFC1A0D0         /* PVP0 Unsigned Overflow Status */
+#define PVP0_IIM1_UOVF_STAT         0xFFC1A0F0         /* PVP0 Unsigned Overflow Status */
+#define PVP0_ACU_CFG                0xFFC1A100         /* PVP0 ACU Configuration Register */
+#define PVP0_ACU_CTL                0xFFC1A104         /* PVP0 ACU Control Register */
+#define PVP0_ACU_OFFSET             0xFFC1A108         /* PVP0 SUM constant register */
+#define PVP0_ACU_FACTOR             0xFFC1A10C         /* PVP0 PROD constant register */
+#define PVP0_ACU_SHIFT              0xFFC1A110         /* PVP0 Shift constant register */
+#define PVP0_ACU_MIN                0xFFC1A114         /* PVP0 Lower saturation threshold set to MIN */
+#define PVP0_ACU_MAX                0xFFC1A118         /* PVP0 Upper saturation threshold set to MAX */
+#define PVP0_UDS_CFG                0xFFC1A140         /* PVP0 UDS Configuration Register */
+#define PVP0_UDS_CTL                0xFFC1A144         /* PVP0 UDS Control Register */
+#define PVP0_UDS_OHCNT              0xFFC1A148         /* PVP0 UDS Output H Dimension */
+#define PVP0_UDS_OVCNT              0xFFC1A14C         /* PVP0 UDS Output V Dimension */
+#define PVP0_UDS_HAVG               0xFFC1A150         /* PVP0 UDS H Taps */
+#define PVP0_UDS_VAVG               0xFFC1A154         /* PVP0 UDS V Taps */
+#define PVP0_IPF0_CFG               0xFFC1A180         /* PVP0 Configuration */
+#define PVP0_IPF0_PIPECTL           0xFFC1A184         /* PVP0 Pipe Control */
+#define PVP0_IPF1_PIPECTL           0xFFC1A1C4         /* PVP0 Pipe Control */
+#define PVP0_IPF0_CTL               0xFFC1A188         /* PVP0 Control */
+#define PVP0_IPF1_CTL               0xFFC1A1C8         /* PVP0 Control */
+#define PVP0_IPF0_TAG               0xFFC1A18C         /* PVP0 TAG Value */
+#define PVP0_IPF1_TAG               0xFFC1A1CC         /* PVP0 TAG Value */
+#define PVP0_IPF0_FCNT              0xFFC1A190         /* PVP0 Frame Count */
+#define PVP0_IPF1_FCNT              0xFFC1A1D0         /* PVP0 Frame Count */
+#define PVP0_IPF0_HCNT              0xFFC1A194         /* PVP0 Horizontal Count */
+#define PVP0_IPF1_HCNT              0xFFC1A1D4         /* PVP0 Horizontal Count */
+#define PVP0_IPF0_VCNT              0xFFC1A198         /* PVP0 Vertical Count */
+#define PVP0_IPF1_VCNT              0xFFC1A1D8         /* PVP0 Vertical Count */
+#define PVP0_IPF0_HPOS              0xFFC1A19C         /* PVP0 Horizontal Position */
+#define PVP0_IPF0_VPOS              0xFFC1A1A0         /* PVP0 Vertical Position */
+#define PVP0_IPF0_TAG_STAT          0xFFC1A1A4         /* PVP0 TAG Status */
+#define PVP0_IPF1_TAG_STAT          0xFFC1A1E4         /* PVP0 TAG Status */
+#define PVP0_IPF1_CFG               0xFFC1A1C0         /* PVP0 Configuration */
+#define PVP0_CNV0_CFG               0xFFC1A200         /* PVP0 Configuration */
+#define PVP0_CNV1_CFG               0xFFC1A280         /* PVP0 Configuration */
+#define PVP0_CNV2_CFG               0xFFC1A300         /* PVP0 Configuration */
+#define PVP0_CNV3_CFG               0xFFC1A380         /* PVP0 Configuration */
+#define PVP0_CNV0_CTL               0xFFC1A204         /* PVP0 Control */
+#define PVP0_CNV1_CTL               0xFFC1A284         /* PVP0 Control */
+#define PVP0_CNV2_CTL               0xFFC1A304         /* PVP0 Control */
+#define PVP0_CNV3_CTL               0xFFC1A384         /* PVP0 Control */
+#define PVP0_CNV0_C00C01            0xFFC1A208         /* PVP0 Coefficients 0, 0 and 0, 1 */
+#define PVP0_CNV1_C00C01            0xFFC1A288         /* PVP0 Coefficients 0, 0 and 0, 1 */
+#define PVP0_CNV2_C00C01            0xFFC1A308         /* PVP0 Coefficients 0, 0 and 0, 1 */
+#define PVP0_CNV3_C00C01            0xFFC1A388         /* PVP0 Coefficients 0, 0 and 0, 1 */
+#define PVP0_CNV0_C02C03            0xFFC1A20C         /* PVP0 Coefficients 0, 2 and 0, 3 */
+#define PVP0_CNV1_C02C03            0xFFC1A28C         /* PVP0 Coefficients 0, 2 and 0, 3 */
+#define PVP0_CNV2_C02C03            0xFFC1A30C         /* PVP0 Coefficients 0, 2 and 0, 3 */
+#define PVP0_CNV3_C02C03            0xFFC1A38C         /* PVP0 Coefficients 0, 2 and 0, 3 */
+#define PVP0_CNV0_C04               0xFFC1A210         /* PVP0 Coefficient 0, 4 */
+#define PVP0_CNV1_C04               0xFFC1A290         /* PVP0 Coefficient 0, 4 */
+#define PVP0_CNV2_C04               0xFFC1A310         /* PVP0 Coefficient 0, 4 */
+#define PVP0_CNV3_C04               0xFFC1A390         /* PVP0 Coefficient 0, 4 */
+#define PVP0_CNV0_C10C11            0xFFC1A214         /* PVP0 Coefficients 1, 0 and 1, 1 */
+#define PVP0_CNV1_C10C11            0xFFC1A294         /* PVP0 Coefficients 1, 0 and 1, 1 */
+#define PVP0_CNV2_C10C11            0xFFC1A314         /* PVP0 Coefficients 1, 0 and 1, 1 */
+#define PVP0_CNV3_C10C11            0xFFC1A394         /* PVP0 Coefficients 1, 0 and 1, 1 */
+#define PVP0_CNV0_C12C13            0xFFC1A218         /* PVP0 Coefficients 1, 2 and 1, 3 */
+#define PVP0_CNV1_C12C13            0xFFC1A298         /* PVP0 Coefficients 1, 2 and 1, 3 */
+#define PVP0_CNV2_C12C13            0xFFC1A318         /* PVP0 Coefficients 1, 2 and 1, 3 */
+#define PVP0_CNV3_C12C13            0xFFC1A398         /* PVP0 Coefficients 1, 2 and 1, 3 */
+#define PVP0_CNV0_C14               0xFFC1A21C         /* PVP0 Coefficient 1, 4 */
+#define PVP0_CNV1_C14               0xFFC1A29C         /* PVP0 Coefficient 1, 4 */
+#define PVP0_CNV2_C14               0xFFC1A31C         /* PVP0 Coefficient 1, 4 */
+#define PVP0_CNV3_C14               0xFFC1A39C         /* PVP0 Coefficient 1, 4 */
+#define PVP0_CNV0_C20C21            0xFFC1A220         /* PVP0 Coefficients 2, 0 and 2, 1 */
+#define PVP0_CNV1_C20C21            0xFFC1A2A0         /* PVP0 Coefficients 2, 0 and 2, 1 */
+#define PVP0_CNV2_C20C21            0xFFC1A320         /* PVP0 Coefficients 2, 0 and 2, 1 */
+#define PVP0_CNV3_C20C21            0xFFC1A3A0         /* PVP0 Coefficients 2, 0 and 2, 1 */
+#define PVP0_CNV0_C22C23            0xFFC1A224         /* PVP0 Coefficients 2, 2 and 2, 3 */
+#define PVP0_CNV1_C22C23            0xFFC1A2A4         /* PVP0 Coefficients 2, 2 and 2, 3 */
+#define PVP0_CNV2_C22C23            0xFFC1A324         /* PVP0 Coefficients 2, 2 and 2, 3 */
+#define PVP0_CNV3_C22C23            0xFFC1A3A4         /* PVP0 Coefficients 2, 2 and 2, 3 */
+#define PVP0_CNV0_C24               0xFFC1A228         /* PVP0 Coefficient 2,4 */
+#define PVP0_CNV1_C24               0xFFC1A2A8         /* PVP0 Coefficient 2,4 */
+#define PVP0_CNV2_C24               0xFFC1A328         /* PVP0 Coefficient 2,4 */
+#define PVP0_CNV3_C24               0xFFC1A3A8         /* PVP0 Coefficient 2,4 */
+#define PVP0_CNV0_C30C31            0xFFC1A22C         /* PVP0 Coefficients 3, 0 and 3, 1 */
+#define PVP0_CNV1_C30C31            0xFFC1A2AC         /* PVP0 Coefficients 3, 0 and 3, 1 */
+#define PVP0_CNV2_C30C31            0xFFC1A32C         /* PVP0 Coefficients 3, 0 and 3, 1 */
+#define PVP0_CNV3_C30C31            0xFFC1A3AC         /* PVP0 Coefficients 3, 0 and 3, 1 */
+#define PVP0_CNV0_C32C33            0xFFC1A230         /* PVP0 Coefficients 3, 2 and 3, 3 */
+#define PVP0_CNV1_C32C33            0xFFC1A2B0         /* PVP0 Coefficients 3, 2 and 3, 3 */
+#define PVP0_CNV2_C32C33            0xFFC1A330         /* PVP0 Coefficients 3, 2 and 3, 3 */
+#define PVP0_CNV3_C32C33            0xFFC1A3B0         /* PVP0 Coefficients 3, 2 and 3, 3 */
+#define PVP0_CNV0_C34               0xFFC1A234         /* PVP0 Coefficient 3, 4 */
+#define PVP0_CNV1_C34               0xFFC1A2B4         /* PVP0 Coefficient 3, 4 */
+#define PVP0_CNV2_C34               0xFFC1A334         /* PVP0 Coefficient 3, 4 */
+#define PVP0_CNV3_C34               0xFFC1A3B4         /* PVP0 Coefficient 3, 4 */
+#define PVP0_CNV0_C40C41            0xFFC1A238         /* PVP0 Coefficients 4, 0 and 4, 1 */
+#define PVP0_CNV1_C40C41            0xFFC1A2B8         /* PVP0 Coefficients 4, 0 and 4, 1 */
+#define PVP0_CNV2_C40C41            0xFFC1A338         /* PVP0 Coefficients 4, 0 and 4, 1 */
+#define PVP0_CNV3_C40C41            0xFFC1A3B8         /* PVP0 Coefficients 4, 0 and 4, 1 */
+#define PVP0_CNV0_C42C43            0xFFC1A23C         /* PVP0 Coefficients 4, 2 and 4, 3 */
+#define PVP0_CNV1_C42C43            0xFFC1A2BC         /* PVP0 Coefficients 4, 2 and 4, 3 */
+#define PVP0_CNV2_C42C43            0xFFC1A33C         /* PVP0 Coefficients 4, 2 and 4, 3 */
+#define PVP0_CNV3_C42C43            0xFFC1A3BC         /* PVP0 Coefficients 4, 2 and 4, 3 */
+#define PVP0_CNV0_C44               0xFFC1A240         /* PVP0 Coefficient 4, 4 */
+#define PVP0_CNV1_C44               0xFFC1A2C0         /* PVP0 Coefficient 4, 4 */
+#define PVP0_CNV2_C44               0xFFC1A340         /* PVP0 Coefficient 4, 4 */
+#define PVP0_CNV3_C44               0xFFC1A3C0         /* PVP0 Coefficient 4, 4 */
+#define PVP0_CNV0_SCALE             0xFFC1A244         /* PVP0 Scaling factor */
+#define PVP0_CNV1_SCALE             0xFFC1A2C4         /* PVP0 Scaling factor */
+#define PVP0_CNV2_SCALE             0xFFC1A344         /* PVP0 Scaling factor */
+#define PVP0_CNV3_SCALE             0xFFC1A3C4         /* PVP0 Scaling factor */
+#define PVP0_THC0_CFG               0xFFC1A400         /* PVP0 Configuration */
+#define PVP0_THC1_CFG               0xFFC1A500         /* PVP0 Configuration */
+#define PVP0_THC0_CTL               0xFFC1A404         /* PVP0 Control */
+#define PVP0_THC1_CTL               0xFFC1A504         /* PVP0 Control */
+#define PVP0_THC0_HFCNT             0xFFC1A408         /* PVP0 Number of frames */
+#define PVP0_THC1_HFCNT             0xFFC1A508         /* PVP0 Number of frames */
+#define PVP0_THC0_RMAXREP           0xFFC1A40C         /* PVP0 Maximum number of RLE reports */
+#define PVP0_THC1_RMAXREP           0xFFC1A50C         /* PVP0 Maximum number of RLE reports */
+#define PVP0_THC0_CMINVAL           0xFFC1A410         /* PVP0 Min clip value */
+#define PVP0_THC1_CMINVAL           0xFFC1A510         /* PVP0 Min clip value */
+#define PVP0_THC0_CMINTH            0xFFC1A414         /* PVP0 Clip Min Threshold */
+#define PVP0_THC1_CMINTH            0xFFC1A514         /* PVP0 Clip Min Threshold */
+#define PVP0_THC0_CMAXTH            0xFFC1A418         /* PVP0 Clip Max Threshold */
+#define PVP0_THC1_CMAXTH            0xFFC1A518         /* PVP0 Clip Max Threshold */
+#define PVP0_THC0_CMAXVAL           0xFFC1A41C         /* PVP0 Max clip value */
+#define PVP0_THC1_CMAXVAL           0xFFC1A51C         /* PVP0 Max clip value */
+#define PVP0_THC0_TH0               0xFFC1A420         /* PVP0 Threshold Value */
+#define PVP0_THC1_TH0               0xFFC1A520         /* PVP0 Threshold Value */
+#define PVP0_THC0_TH1               0xFFC1A424         /* PVP0 Threshold Value */
+#define PVP0_THC1_TH1               0xFFC1A524         /* PVP0 Threshold Value */
+#define PVP0_THC0_TH2               0xFFC1A428         /* PVP0 Threshold Value */
+#define PVP0_THC1_TH2               0xFFC1A528         /* PVP0 Threshold Value */
+#define PVP0_THC0_TH3               0xFFC1A42C         /* PVP0 Threshold Value */
+#define PVP0_THC1_TH3               0xFFC1A52C         /* PVP0 Threshold Value */
+#define PVP0_THC0_TH4               0xFFC1A430         /* PVP0 Threshold Value */
+#define PVP0_THC1_TH4               0xFFC1A530         /* PVP0 Threshold Value */
+#define PVP0_THC0_TH5               0xFFC1A434         /* PVP0 Threshold Value */
+#define PVP0_THC1_TH5               0xFFC1A534         /* PVP0 Threshold Value */
+#define PVP0_THC0_TH6               0xFFC1A438         /* PVP0 Threshold Value */
+#define PVP0_THC1_TH6               0xFFC1A538         /* PVP0 Threshold Value */
+#define PVP0_THC0_TH7               0xFFC1A43C         /* PVP0 Threshold Value */
+#define PVP0_THC1_TH7               0xFFC1A53C         /* PVP0 Threshold Value */
+#define PVP0_THC0_TH8               0xFFC1A440         /* PVP0 Threshold Value */
+#define PVP0_THC1_TH8               0xFFC1A540         /* PVP0 Threshold Value */
+#define PVP0_THC0_TH9               0xFFC1A444         /* PVP0 Threshold Value */
+#define PVP0_THC1_TH9               0xFFC1A544         /* PVP0 Threshold Value */
+#define PVP0_THC0_TH10              0xFFC1A448         /* PVP0 Threshold Value */
+#define PVP0_THC1_TH10              0xFFC1A548         /* PVP0 Threshold Value */
+#define PVP0_THC0_TH11              0xFFC1A44C         /* PVP0 Threshold Value */
+#define PVP0_THC1_TH11              0xFFC1A54C         /* PVP0 Threshold Value */
+#define PVP0_THC0_TH12              0xFFC1A450         /* PVP0 Threshold Value */
+#define PVP0_THC1_TH12              0xFFC1A550         /* PVP0 Threshold Value */
+#define PVP0_THC0_TH13              0xFFC1A454         /* PVP0 Threshold Value */
+#define PVP0_THC1_TH13              0xFFC1A554         /* PVP0 Threshold Value */
+#define PVP0_THC0_TH14              0xFFC1A458         /* PVP0 Threshold Value */
+#define PVP0_THC1_TH14              0xFFC1A558         /* PVP0 Threshold Value */
+#define PVP0_THC0_TH15              0xFFC1A45C         /* PVP0 Threshold Value */
+#define PVP0_THC1_TH15              0xFFC1A55C         /* PVP0 Threshold Value */
+#define PVP0_THC0_HHPOS             0xFFC1A460         /* PVP0 Window start X-coordinate */
+#define PVP0_THC1_HHPOS             0xFFC1A560         /* PVP0 Window start X-coordinate */
+#define PVP0_THC0_HVPOS             0xFFC1A464         /* PVP0 Window start Y-coordinate */
+#define PVP0_THC1_HVPOS             0xFFC1A564         /* PVP0 Window start Y-coordinate */
+#define PVP0_THC0_HHCNT             0xFFC1A468         /* PVP0 Window width in X dimension */
+#define PVP0_THC1_HHCNT             0xFFC1A568         /* PVP0 Window width in X dimension */
+#define PVP0_THC0_HVCNT             0xFFC1A46C         /* PVP0 Window width in Y dimension */
+#define PVP0_THC1_HVCNT             0xFFC1A56C         /* PVP0 Window width in Y dimension */
+#define PVP0_THC0_RHPOS             0xFFC1A470         /* PVP0 Window start X-coordinate */
+#define PVP0_THC1_RHPOS             0xFFC1A570         /* PVP0 Window start X-coordinate */
+#define PVP0_THC0_RVPOS             0xFFC1A474         /* PVP0 Window start Y-coordinate */
+#define PVP0_THC1_RVPOS             0xFFC1A574         /* PVP0 Window start Y-coordinate */
+#define PVP0_THC0_RHCNT             0xFFC1A478         /* PVP0 Window width in X dimension */
+#define PVP0_THC1_RHCNT             0xFFC1A578         /* PVP0 Window width in X dimension */
+#define PVP0_THC0_RVCNT             0xFFC1A47C         /* PVP0 Window width in Y dimension */
+#define PVP0_THC1_RVCNT             0xFFC1A57C         /* PVP0 Window width in Y dimension */
+#define PVP0_THC0_HFCNT_STAT        0xFFC1A480         /* PVP0 Current Frame counter */
+#define PVP0_THC1_HFCNT_STAT        0xFFC1A580         /* PVP0 Current Frame counter */
+#define PVP0_THC0_HCNT0_STAT        0xFFC1A484         /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT0_STAT        0xFFC1A584         /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT1_STAT        0xFFC1A488         /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT1_STAT        0xFFC1A588         /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT2_STAT        0xFFC1A48C         /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT2_STAT        0xFFC1A58C         /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT3_STAT        0xFFC1A490         /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT3_STAT        0xFFC1A590         /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT4_STAT        0xFFC1A494         /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT4_STAT        0xFFC1A594         /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT5_STAT        0xFFC1A498         /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT5_STAT        0xFFC1A598         /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT6_STAT        0xFFC1A49C         /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT6_STAT        0xFFC1A59C         /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT7_STAT        0xFFC1A4A0         /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT7_STAT        0xFFC1A5A0         /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT8_STAT        0xFFC1A4A4         /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT8_STAT        0xFFC1A5A4         /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT9_STAT        0xFFC1A4A8         /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT9_STAT        0xFFC1A5A8         /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT10_STAT       0xFFC1A4AC         /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT10_STAT       0xFFC1A5AC         /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT11_STAT       0xFFC1A4B0         /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT11_STAT       0xFFC1A5B0         /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT12_STAT       0xFFC1A4B4         /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT12_STAT       0xFFC1A5B4         /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT13_STAT       0xFFC1A4B8         /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT13_STAT       0xFFC1A5B8         /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT14_STAT       0xFFC1A4BC         /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT14_STAT       0xFFC1A5BC         /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT15_STAT       0xFFC1A4C0         /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT15_STAT       0xFFC1A5C0         /* PVP0 Histogram counter value */
+#define PVP0_THC0_RREP_STAT         0xFFC1A4C4         /* PVP0 Number of RLE Reports */
+#define PVP0_THC1_RREP_STAT         0xFFC1A5C4         /* PVP0 Number of RLE Reports */
+#define PVP0_PMA_CFG                0xFFC1A600         /* PVP0 PMA Configuration Register */
+
+#endif /* _DEF_BF609_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h
new file mode 100644
index 0000000..3933e91
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h
@@ -0,0 +1,3596 @@
+/*
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF60X_H
+#define _DEF_BF60X_H
+
+
+/* ************************************************************** */
+/*   SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF60x    */
+/* ************************************************************** */
+
+
+/* =========================
+        CNT Registers
+   ========================= */
+
+/* =========================
+        CNT0
+   ========================= */
+#define CNT_CONFIG                 0xFFC00400         /* CNT0 Configuration Register */
+#define CNT_IMASK                  0xFFC00404         /* CNT0 Interrupt Mask Register */
+#define CNT_STATUS                 0xFFC00408         /* CNT0 Status Register */
+#define CNT_COMMAND                0xFFC0040C         /* CNT0 Command Register */
+#define CNT_DEBOUNCE               0xFFC00410         /* CNT0 Debounce Register */
+#define CNT_COUNTER                0xFFC00414         /* CNT0 Counter Register */
+#define CNT_MAX                    0xFFC00418         /* CNT0 Maximum Count Register */
+#define CNT_MIN                    0xFFC0041C         /* CNT0 Minimum Count Register */
+
+
+/* =========================
+        RSI Registers
+   ========================= */
+
+#define RSI_CLK_CONTROL            0xFFC00604         /* RSI0 Clock Control Register */
+#define RSI_ARGUMENT               0xFFC00608         /* RSI0 Argument Register */
+#define RSI_COMMAND                0xFFC0060C         /* RSI0 Command Register */
+#define RSI_RESP_CMD               0xFFC00610         /* RSI0 Response Command Register */
+#define RSI_RESPONSE0              0xFFC00614         /* RSI0 Response 0 Register */
+#define RSI_RESPONSE1              0xFFC00618         /* RSI0 Response 1 Register */
+#define RSI_RESPONSE2              0xFFC0061C         /* RSI0 Response 2 Register */
+#define RSI_RESPONSE3              0xFFC00620         /* RSI0 Response 3 Register */
+#define RSI_DATA_TIMER             0xFFC00624         /* RSI0 Data Timer Register */
+#define RSI_DATA_LGTH              0xFFC00628         /* RSI0 Data Length Register */
+#define RSI_DATA_CONTROL           0xFFC0062C         /* RSI0 Data Control Register */
+#define RSI_DATA_CNT               0xFFC00630         /* RSI0 Data Count Register */
+#define RSI_STATUS                 0xFFC00634         /* RSI0 Status Register */
+#define RSI_STATUSCL               0xFFC00638         /* RSI0 Status Clear Register */
+#define RSI_MASK0                  0xFFC0063C         /* RSI0 Interrupt 0 Mask Register */
+#define RSI_MASK1                  0xFFC00640         /* RSI0 Interrupt 1 Mask Register */
+#define RSI_FIFO_CNT               0xFFC00648         /* RSI0 FIFO Counter Register */
+#define RSI_CEATA_CONTROL          0xFFC0064C         /* RSI0 This register contains bit to dis CCS gen */
+#define RSI_BOOT_TCNTR             0xFFC00650         /* RSI0 Boot Timing Counter Register */
+#define RSI_BACK_TOUT              0xFFC00654         /* RSI0 Boot Acknowledge Timeout Register */
+#define RSI_SLP_WKUP_TOUT          0xFFC00658         /* RSI0 Sleep Wakeup Timeout Register */
+#define RSI_BLKSZ                  0xFFC0065C         /* RSI0 Block Size Register */
+#define RSI_FIFO                   0xFFC00680         /* RSI0 Data FIFO Register */
+#define RSI_ESTAT                  0xFFC006C0         /* RSI0 Exception Status Register */
+#define RSI_EMASK                  0xFFC006C4         /* RSI0 Exception Mask Register */
+#define RSI_CONFIG                 0xFFC006C8         /* RSI0 Configuration Register */
+#define RSI_RD_WAIT_EN             0xFFC006CC         /* RSI0 Read Wait Enable Register */
+#define RSI_PID0                   0xFFC006D0         /* RSI0 Peripheral Identification Register */
+#define RSI_PID1                   0xFFC006D4         /* RSI0 Peripheral Identification Register */
+#define RSI_PID2                   0xFFC006D8         /* RSI0 Peripheral Identification Register */
+#define RSI_PID3                   0xFFC006DC         /* RSI0 Peripheral Identification Register */
+
+/* =========================
+        CAN Registers
+   ========================= */
+
+/* =========================
+        CAN0
+   ========================= */
+#define CAN0_MC1                    0xFFC00A00         /* CAN0 Mailbox Configuration Register 1 */
+#define CAN0_MD1                    0xFFC00A04         /* CAN0 Mailbox Direction Register 1 */
+#define CAN0_TRS1                   0xFFC00A08         /* CAN0 Transmission Request Set Register 1 */
+#define CAN0_TRR1                   0xFFC00A0C         /* CAN0 Transmission Request Reset Register 1 */
+#define CAN0_TA1                    0xFFC00A10         /* CAN0 Transmission Acknowledge Register 1 */
+#define CAN0_AA1                    0xFFC00A14         /* CAN0 Abort Acknowledge Register 1 */
+#define CAN0_RMP1                   0xFFC00A18         /* CAN0 Receive Message Pending Register 1 */
+#define CAN0_RML1                   0xFFC00A1C         /* CAN0 Receive Message Lost Register 1 */
+#define CAN0_MBTIF1                 0xFFC00A20         /* CAN0 Mailbox Transmit Interrupt Flag Register 1 */
+#define CAN0_MBRIF1                 0xFFC00A24         /* CAN0 Mailbox Receive Interrupt Flag Register 1 */
+#define CAN0_MBIM1                  0xFFC00A28         /* CAN0 Mailbox Interrupt Mask Register 1 */
+#define CAN0_RFH1                   0xFFC00A2C         /* CAN0 Remote Frame Handling Register 1 */
+#define CAN0_OPSS1                  0xFFC00A30         /* CAN0 Overwrite Protection/Single Shot Transmission Register 1 */
+#define CAN0_MC2                    0xFFC00A40         /* CAN0 Mailbox Configuration Register 2 */
+#define CAN0_MD2                    0xFFC00A44         /* CAN0 Mailbox Direction Register 2 */
+#define CAN0_TRS2                   0xFFC00A48         /* CAN0 Transmission Request Set Register 2 */
+#define CAN0_TRR2                   0xFFC00A4C         /* CAN0 Transmission Request Reset Register 2 */
+#define CAN0_TA2                    0xFFC00A50         /* CAN0 Transmission Acknowledge Register 2 */
+#define CAN0_AA2                    0xFFC00A54         /* CAN0 Abort Acknowledge Register 2 */
+#define CAN0_RMP2                   0xFFC00A58         /* CAN0 Receive Message Pending Register 2 */
+#define CAN0_RML2                   0xFFC00A5C         /* CAN0 Receive Message Lost Register 2 */
+#define CAN0_MBTIF2                 0xFFC00A60         /* CAN0 Mailbox Transmit Interrupt Flag Register 2 */
+#define CAN0_MBRIF2                 0xFFC00A64         /* CAN0 Mailbox Receive Interrupt Flag Register 2 */
+#define CAN0_MBIM2                  0xFFC00A68         /* CAN0 Mailbox Interrupt Mask Register 2 */
+#define CAN0_RFH2                   0xFFC00A6C         /* CAN0 Remote Frame Handling Register 2 */
+#define CAN0_OPSS2                  0xFFC00A70         /* CAN0 Overwrite Protection/Single Shot Transmission Register 2 */
+#define CAN0_CLOCK                    0xFFC00A80         /* CAN0 Clock Register */
+#define CAN0_TIMING                 0xFFC00A84         /* CAN0 Timing Register */
+#define CAN0_DEBUG                    0xFFC00A88         /* CAN0 Debug Register */
+#define CAN0_STATUS                   0xFFC00A8C         /* CAN0 Status Register */
+#define CAN0_CEC                    0xFFC00A90         /* CAN0 Error Counter Register */
+#define CAN0_GIS                    0xFFC00A94         /* CAN0 Global CAN Interrupt Status */
+#define CAN0_GIM                    0xFFC00A98         /* CAN0 Global CAN Interrupt Mask */
+#define CAN0_GIF                    0xFFC00A9C         /* CAN0 Global CAN Interrupt Flag */
+#define CAN0_CONTROL                    0xFFC00AA0         /* CAN0 CAN Master Control Register */
+#define CAN0_INTR                    0xFFC00AA4         /* CAN0 Interrupt Pending Register */
+#define CAN0_MBTD                   0xFFC00AAC         /* CAN0 Temporary Mailbox Disable Register */
+#define CAN0_EWR                    0xFFC00AB0         /* CAN0 Error Counter Warning Level Register */
+#define CAN0_ESR                    0xFFC00AB4         /* CAN0 Error Status Register */
+#define CAN0_UCCNT                  0xFFC00AC4         /* CAN0 Universal Counter Register */
+#define CAN0_UCRC                   0xFFC00AC8         /* CAN0 Universal Counter Reload/Capture Register */
+#define CAN0_UCCNF                  0xFFC00ACC         /* CAN0 Universal Counter Configuration Mode Register */
+#define CAN0_AM00L                  0xFFC00B00         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM01L                  0xFFC00B08         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM02L                  0xFFC00B10         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM03L                  0xFFC00B18         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM04L                  0xFFC00B20         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM05L                  0xFFC00B28         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM06L                  0xFFC00B30         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM07L                  0xFFC00B38         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM08L                  0xFFC00B40         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM09L                  0xFFC00B48         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM10L                  0xFFC00B50         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM11L                  0xFFC00B58         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM12L                  0xFFC00B60         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM13L                  0xFFC00B68         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM14L                  0xFFC00B70         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM15L                  0xFFC00B78         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM16L                  0xFFC00B80         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM17L                  0xFFC00B88         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM18L                  0xFFC00B90         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM19L                  0xFFC00B98         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM20L                  0xFFC00BA0         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM21L                  0xFFC00BA8         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM22L                  0xFFC00BB0         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM23L                  0xFFC00BB8         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM24L                  0xFFC00BC0         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM25L                  0xFFC00BC8         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM26L                  0xFFC00BD0         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM27L                  0xFFC00BD8         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM28L                  0xFFC00BE0         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM29L                  0xFFC00BE8         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM30L                  0xFFC00BF0         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM31L                  0xFFC00BF8         /* CAN0 Acceptance Mask Register (L) */
+#define CAN0_AM00H                  0xFFC00B04         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM01H                  0xFFC00B0C         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM02H                  0xFFC00B14         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM03H                  0xFFC00B1C         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM04H                  0xFFC00B24         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM05H                  0xFFC00B2C         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM06H                  0xFFC00B34         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM07H                  0xFFC00B3C         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM08H                  0xFFC00B44         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM09H                  0xFFC00B4C         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM10H                  0xFFC00B54         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM11H                  0xFFC00B5C         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM12H                  0xFFC00B64         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM13H                  0xFFC00B6C         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM14H                  0xFFC00B74         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM15H                  0xFFC00B7C         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM16H                  0xFFC00B84         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM17H                  0xFFC00B8C         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM18H                  0xFFC00B94         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM19H                  0xFFC00B9C         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM20H                  0xFFC00BA4         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM21H                  0xFFC00BAC         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM22H                  0xFFC00BB4         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM23H                  0xFFC00BBC         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM24H                  0xFFC00BC4         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM25H                  0xFFC00BCC         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM26H                  0xFFC00BD4         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM27H                  0xFFC00BDC         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM28H                  0xFFC00BE4         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM29H                  0xFFC00BEC         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM30H                  0xFFC00BF4         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_AM31H                  0xFFC00BFC         /* CAN0 Acceptance Mask Register (H) */
+#define CAN0_MB00_DATA0             0xFFC00C00         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB01_DATA0             0xFFC00C20         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB02_DATA0             0xFFC00C40         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB03_DATA0             0xFFC00C60         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB04_DATA0             0xFFC00C80         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB05_DATA0             0xFFC00CA0         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB06_DATA0             0xFFC00CC0         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB07_DATA0             0xFFC00CE0         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB08_DATA0             0xFFC00D00         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB09_DATA0             0xFFC00D20         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB10_DATA0             0xFFC00D40         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB11_DATA0             0xFFC00D60         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB12_DATA0             0xFFC00D80         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB13_DATA0             0xFFC00DA0         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB14_DATA0             0xFFC00DC0         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB15_DATA0             0xFFC00DE0         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB16_DATA0             0xFFC00E00         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB17_DATA0             0xFFC00E20         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB18_DATA0             0xFFC00E40         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB19_DATA0             0xFFC00E60         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB20_DATA0             0xFFC00E80         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB21_DATA0             0xFFC00EA0         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB22_DATA0             0xFFC00EC0         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB23_DATA0             0xFFC00EE0         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB24_DATA0             0xFFC00F00         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB25_DATA0             0xFFC00F20         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB26_DATA0             0xFFC00F40         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB27_DATA0             0xFFC00F60         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB28_DATA0             0xFFC00F80         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB29_DATA0             0xFFC00FA0         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB30_DATA0             0xFFC00FC0         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB31_DATA0             0xFFC00FE0         /* CAN0 Mailbox Word 0 Register */
+#define CAN0_MB00_DATA1             0xFFC00C04         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB01_DATA1             0xFFC00C24         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB02_DATA1             0xFFC00C44         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB03_DATA1             0xFFC00C64         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB04_DATA1             0xFFC00C84         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB05_DATA1             0xFFC00CA4         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB06_DATA1             0xFFC00CC4         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB07_DATA1             0xFFC00CE4         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB08_DATA1             0xFFC00D04         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB09_DATA1             0xFFC00D24         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB10_DATA1             0xFFC00D44         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB11_DATA1             0xFFC00D64         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB12_DATA1             0xFFC00D84         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB13_DATA1             0xFFC00DA4         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB14_DATA1             0xFFC00DC4         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB15_DATA1             0xFFC00DE4         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB16_DATA1             0xFFC00E04         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB17_DATA1             0xFFC00E24         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB18_DATA1             0xFFC00E44         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB19_DATA1             0xFFC00E64         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB20_DATA1             0xFFC00E84         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB21_DATA1             0xFFC00EA4         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB22_DATA1             0xFFC00EC4         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB23_DATA1             0xFFC00EE4         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB24_DATA1             0xFFC00F04         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB25_DATA1             0xFFC00F24         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB26_DATA1             0xFFC00F44         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB27_DATA1             0xFFC00F64         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB28_DATA1             0xFFC00F84         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB29_DATA1             0xFFC00FA4         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB30_DATA1             0xFFC00FC4         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB31_DATA1             0xFFC00FE4         /* CAN0 Mailbox Word 1 Register */
+#define CAN0_MB00_DATA2             0xFFC00C08         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB01_DATA2             0xFFC00C28         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB02_DATA2             0xFFC00C48         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB03_DATA2             0xFFC00C68         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB04_DATA2             0xFFC00C88         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB05_DATA2             0xFFC00CA8         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB06_DATA2             0xFFC00CC8         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB07_DATA2             0xFFC00CE8         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB08_DATA2             0xFFC00D08         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB09_DATA2             0xFFC00D28         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB10_DATA2             0xFFC00D48         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB11_DATA2             0xFFC00D68         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB12_DATA2             0xFFC00D88         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB13_DATA2             0xFFC00DA8         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB14_DATA2             0xFFC00DC8         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB15_DATA2             0xFFC00DE8         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB16_DATA2             0xFFC00E08         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB17_DATA2             0xFFC00E28         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB18_DATA2             0xFFC00E48         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB19_DATA2             0xFFC00E68         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB20_DATA2             0xFFC00E88         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB21_DATA2             0xFFC00EA8         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB22_DATA2             0xFFC00EC8         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB23_DATA2             0xFFC00EE8         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB24_DATA2             0xFFC00F08         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB25_DATA2             0xFFC00F28         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB26_DATA2             0xFFC00F48         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB27_DATA2             0xFFC00F68         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB28_DATA2             0xFFC00F88         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB29_DATA2             0xFFC00FA8         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB30_DATA2             0xFFC00FC8         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB31_DATA2             0xFFC00FE8         /* CAN0 Mailbox Word 2 Register */
+#define CAN0_MB00_DATA3             0xFFC00C0C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB01_DATA3             0xFFC00C2C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB02_DATA3             0xFFC00C4C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB03_DATA3             0xFFC00C6C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB04_DATA3             0xFFC00C8C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB05_DATA3             0xFFC00CAC         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB06_DATA3             0xFFC00CCC         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB07_DATA3             0xFFC00CEC         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB08_DATA3             0xFFC00D0C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB09_DATA3             0xFFC00D2C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB10_DATA3             0xFFC00D4C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB11_DATA3             0xFFC00D6C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB12_DATA3             0xFFC00D8C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB13_DATA3             0xFFC00DAC         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB14_DATA3             0xFFC00DCC         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB15_DATA3             0xFFC00DEC         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB16_DATA3             0xFFC00E0C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB17_DATA3             0xFFC00E2C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB18_DATA3             0xFFC00E4C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB19_DATA3             0xFFC00E6C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB20_DATA3             0xFFC00E8C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB21_DATA3             0xFFC00EAC         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB22_DATA3             0xFFC00ECC         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB23_DATA3             0xFFC00EEC         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB24_DATA3             0xFFC00F0C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB25_DATA3             0xFFC00F2C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB26_DATA3             0xFFC00F4C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB27_DATA3             0xFFC00F6C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB28_DATA3             0xFFC00F8C         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB29_DATA3             0xFFC00FAC         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB30_DATA3             0xFFC00FCC         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB31_DATA3             0xFFC00FEC         /* CAN0 Mailbox Word 3 Register */
+#define CAN0_MB00_LENGTH            0xFFC00C10         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB01_LENGTH            0xFFC00C30         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB02_LENGTH            0xFFC00C50         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB03_LENGTH            0xFFC00C70         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB04_LENGTH            0xFFC00C90         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB05_LENGTH            0xFFC00CB0         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB06_LENGTH            0xFFC00CD0         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB07_LENGTH            0xFFC00CF0         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB08_LENGTH            0xFFC00D10         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB09_LENGTH            0xFFC00D30         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB10_LENGTH            0xFFC00D50         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB11_LENGTH            0xFFC00D70         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB12_LENGTH            0xFFC00D90         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB13_LENGTH            0xFFC00DB0         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB14_LENGTH            0xFFC00DD0         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB15_LENGTH            0xFFC00DF0         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB16_LENGTH            0xFFC00E10         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB17_LENGTH            0xFFC00E30         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB18_LENGTH            0xFFC00E50         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB19_LENGTH            0xFFC00E70         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB20_LENGTH            0xFFC00E90         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB21_LENGTH            0xFFC00EB0         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB22_LENGTH            0xFFC00ED0         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB23_LENGTH            0xFFC00EF0         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB24_LENGTH            0xFFC00F10         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB25_LENGTH            0xFFC00F30         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB26_LENGTH            0xFFC00F50         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB27_LENGTH            0xFFC00F70         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB28_LENGTH            0xFFC00F90         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB29_LENGTH            0xFFC00FB0         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB30_LENGTH            0xFFC00FD0         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB31_LENGTH            0xFFC00FF0         /* CAN0 Mailbox Word 4 Register */
+#define CAN0_MB00_TIMESTAMP         0xFFC00C14         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB01_TIMESTAMP         0xFFC00C34         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB02_TIMESTAMP         0xFFC00C54         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB03_TIMESTAMP         0xFFC00C74         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB04_TIMESTAMP         0xFFC00C94         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB05_TIMESTAMP         0xFFC00CB4         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB06_TIMESTAMP         0xFFC00CD4         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB07_TIMESTAMP         0xFFC00CF4         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB08_TIMESTAMP         0xFFC00D14         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB09_TIMESTAMP         0xFFC00D34         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB10_TIMESTAMP         0xFFC00D54         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB11_TIMESTAMP         0xFFC00D74         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB12_TIMESTAMP         0xFFC00D94         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB13_TIMESTAMP         0xFFC00DB4         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB14_TIMESTAMP         0xFFC00DD4         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB15_TIMESTAMP         0xFFC00DF4         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB16_TIMESTAMP         0xFFC00E14         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB17_TIMESTAMP         0xFFC00E34         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB18_TIMESTAMP         0xFFC00E54         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB19_TIMESTAMP         0xFFC00E74         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB20_TIMESTAMP         0xFFC00E94         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB21_TIMESTAMP         0xFFC00EB4         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB22_TIMESTAMP         0xFFC00ED4         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB23_TIMESTAMP         0xFFC00EF4         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB24_TIMESTAMP         0xFFC00F14         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB25_TIMESTAMP         0xFFC00F34         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB26_TIMESTAMP         0xFFC00F54         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB27_TIMESTAMP         0xFFC00F74         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB28_TIMESTAMP         0xFFC00F94         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB29_TIMESTAMP         0xFFC00FB4         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB30_TIMESTAMP         0xFFC00FD4         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB31_TIMESTAMP         0xFFC00FF4         /* CAN0 Mailbox Word 5 Register */
+#define CAN0_MB00_ID0               0xFFC00C18         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB01_ID0               0xFFC00C38         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB02_ID0               0xFFC00C58         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB03_ID0               0xFFC00C78         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB04_ID0               0xFFC00C98         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB05_ID0               0xFFC00CB8         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB06_ID0               0xFFC00CD8         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB07_ID0               0xFFC00CF8         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB08_ID0               0xFFC00D18         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB09_ID0               0xFFC00D38         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB10_ID0               0xFFC00D58         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB11_ID0               0xFFC00D78         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB12_ID0               0xFFC00D98         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB13_ID0               0xFFC00DB8         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB14_ID0               0xFFC00DD8         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB15_ID0               0xFFC00DF8         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB16_ID0               0xFFC00E18         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB17_ID0               0xFFC00E38         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB18_ID0               0xFFC00E58         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB19_ID0               0xFFC00E78         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB20_ID0               0xFFC00E98         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB21_ID0               0xFFC00EB8         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB22_ID0               0xFFC00ED8         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB23_ID0               0xFFC00EF8         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB24_ID0               0xFFC00F18         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB25_ID0               0xFFC00F38         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB26_ID0               0xFFC00F58         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB27_ID0               0xFFC00F78         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB28_ID0               0xFFC00F98         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB29_ID0               0xFFC00FB8         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB30_ID0               0xFFC00FD8         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB31_ID0               0xFFC00FF8         /* CAN0 Mailbox Word 6 Register */
+#define CAN0_MB00_ID1               0xFFC00C1C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB01_ID1               0xFFC00C3C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB02_ID1               0xFFC00C5C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB03_ID1               0xFFC00C7C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB04_ID1               0xFFC00C9C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB05_ID1               0xFFC00CBC         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB06_ID1               0xFFC00CDC         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB07_ID1               0xFFC00CFC         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB08_ID1               0xFFC00D1C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB09_ID1               0xFFC00D3C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB10_ID1               0xFFC00D5C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB11_ID1               0xFFC00D7C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB12_ID1               0xFFC00D9C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB13_ID1               0xFFC00DBC         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB14_ID1               0xFFC00DDC         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB15_ID1               0xFFC00DFC         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB16_ID1               0xFFC00E1C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB17_ID1               0xFFC00E3C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB18_ID1               0xFFC00E5C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB19_ID1               0xFFC00E7C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB20_ID1               0xFFC00E9C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB21_ID1               0xFFC00EBC         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB22_ID1               0xFFC00EDC         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB23_ID1               0xFFC00EFC         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB24_ID1               0xFFC00F1C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB25_ID1               0xFFC00F3C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB26_ID1               0xFFC00F5C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB27_ID1               0xFFC00F7C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB28_ID1               0xFFC00F9C         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB29_ID1               0xFFC00FBC         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB30_ID1               0xFFC00FDC         /* CAN0 Mailbox Word 7 Register */
+#define CAN0_MB31_ID1               0xFFC00FFC         /* CAN0 Mailbox Word 7 Register */
+
+/* =========================
+	LINK PORT Registers
+   ========================= */
+#define LP0_CTL                     0xFFC01000         /* LP0 Control Register */
+#define LP0_STAT                    0xFFC01004         /* LP0 Status Register */
+#define LP0_DIV                     0xFFC01008         /* LP0 Clock Divider Value */
+#define LP0_CNT                     0xFFC0100C         /* LP0 Current Count Value of Clock Divider */
+#define LP0_TX                      0xFFC01010         /* LP0 Transmit Buffer */
+#define LP0_RX                      0xFFC01014         /* LP0 Receive Buffer */
+#define LP0_TXIN_SHDW               0xFFC01018         /* LP0 Shadow Input Transmit Buffer */
+#define LP0_TXOUT_SHDW              0xFFC0101C         /* LP0 Shadow Output Transmit Buffer */
+#define LP1_CTL                     0xFFC01100         /* LP1 Control Register */
+#define LP1_STAT                    0xFFC01104         /* LP1 Status Register */
+#define LP1_DIV                     0xFFC01108         /* LP1 Clock Divider Value */
+#define LP1_CNT                     0xFFC0110C         /* LP1 Current Count Value of Clock Divider */
+#define LP1_TX                      0xFFC01110         /* LP1 Transmit Buffer */
+#define LP1_RX                      0xFFC01114         /* LP1 Receive Buffer */
+#define LP1_TXIN_SHDW               0xFFC01118         /* LP1 Shadow Input Transmit Buffer */
+#define LP1_TXOUT_SHDW              0xFFC0111C         /* LP1 Shadow Output Transmit Buffer */
+#define LP2_CTL                     0xFFC01200         /* LP2 Control Register */
+#define LP2_STAT                    0xFFC01204         /* LP2 Status Register */
+#define LP2_DIV                     0xFFC01208         /* LP2 Clock Divider Value */
+#define LP2_CNT                     0xFFC0120C         /* LP2 Current Count Value of Clock Divider */
+#define LP2_TX                      0xFFC01210         /* LP2 Transmit Buffer */
+#define LP2_RX                      0xFFC01214         /* LP2 Receive Buffer */
+#define LP2_TXIN_SHDW               0xFFC01218         /* LP2 Shadow Input Transmit Buffer */
+#define LP2_TXOUT_SHDW              0xFFC0121C         /* LP2 Shadow Output Transmit Buffer */
+#define LP3_CTL                     0xFFC01300         /* LP3 Control Register */
+#define LP3_STAT                    0xFFC01304         /* LP3 Status Register */
+#define LP3_DIV                     0xFFC01308         /* LP3 Clock Divider Value */
+#define LP3_CNT                     0xFFC0130C         /* LP3 Current Count Value of Clock Divider */
+#define LP3_TX                      0xFFC01310         /* LP3 Transmit Buffer */
+#define LP3_RX                      0xFFC01314         /* LP3 Receive Buffer */
+#define LP3_TXIN_SHDW               0xFFC01318         /* LP3 Shadow Input Transmit Buffer */
+#define LP3_TXOUT_SHDW              0xFFC0131C         /* LP3 Shadow Output Transmit Buffer */
+
+/* =========================
+        TIMER Registers
+   ========================= */
+#define TIMER_REVID                0xFFC01400         /* GPTIMER Timer IP Version ID */
+#define TIMER_RUN                  0xFFC01404         /* GPTIMER Timer Run Register */
+#define TIMER_RUN_SET              0xFFC01408         /* GPTIMER Run Register Alias to Set */
+#define TIMER_RUN_CLR              0xFFC0140C         /* GPTIMER Run Register Alias to Clear */
+#define TIMER_STOP_CFG             0xFFC01410         /* GPTIMER Stop Config Register */
+#define TIMER_STOP_CFG_SET         0xFFC01414         /* GPTIMER Stop Config Alias to Set */
+#define TIMER_STOP_CFG_CLR         0xFFC01418         /* GPTIMER Stop Config Alias to Clear */
+#define TIMER_DATA_IMSK            0xFFC0141C         /* GPTIMER Data Interrupt Mask register */
+#define TIMER_STAT_IMSK            0xFFC01420         /* GPTIMER Status Interrupt Mask register */
+#define TIMER_TRG_MSK              0xFFC01424         /* GPTIMER Output Trigger Mask register */
+#define TIMER_TRG_IE               0xFFC01428         /* GPTIMER Slave Trigger Enable register */
+#define TIMER_DATA_ILAT            0xFFC0142C         /* GPTIMER Data Interrupt Register */
+#define TIMER_STAT_ILAT            0xFFC01430         /* GPTIMER Status (Error) Interrupt Register */
+#define TIMER_ERR_TYPE             0xFFC01434         /* GPTIMER Register Indicating Type of Error */
+#define TIMER_BCAST_PER            0xFFC01438         /* GPTIMER Broadcast Period */
+#define TIMER_BCAST_WID            0xFFC0143C         /* GPTIMER Broadcast Width */
+#define TIMER_BCAST_DLY            0xFFC01440         /* GPTIMER Broadcast Delay */
+
+/* =========================
+	TIMER0~7
+   ========================= */
+#define TIMER0_CONFIG             0xFFC01460         /* TIMER0 Per Timer Config Register */
+#define TIMER0_COUNTER            0xFFC01464         /* TIMER0 Per Timer Counter Register */
+#define TIMER0_PERIOD             0xFFC01468         /* TIMER0 Per Timer Period Register */
+#define TIMER0_WIDTH              0xFFC0146C         /* TIMER0 Per Timer Width Register */
+#define TIMER0_DELAY              0xFFC01470         /* TIMER0 Per Timer Delay Register */
+
+#define TIMER1_CONFIG             0xFFC01480         /* TIMER1 Per Timer Config Register */
+#define TIMER1_COUNTER            0xFFC01484         /* TIMER1 Per Timer Counter Register */
+#define TIMER1_PERIOD             0xFFC01488         /* TIMER1 Per Timer Period Register */
+#define TIMER1_WIDTH              0xFFC0148C         /* TIMER1 Per Timer Width Register */
+#define TIMER1_DELAY              0xFFC01490         /* TIMER1 Per Timer Delay Register */
+
+#define TIMER2_CONFIG             0xFFC014A0         /* TIMER2 Per Timer Config Register */
+#define TIMER2_COUNTER            0xFFC014A4         /* TIMER2 Per Timer Counter Register */
+#define TIMER2_PERIOD             0xFFC014A8         /* TIMER2 Per Timer Period Register */
+#define TIMER2_WIDTH              0xFFC014AC         /* TIMER2 Per Timer Width Register */
+#define TIMER2_DELAY              0xFFC014B0         /* TIMER2 Per Timer Delay Register */
+
+#define TIMER3_CONFIG             0xFFC014C0         /* TIMER3 Per Timer Config Register */
+#define TIMER3_COUNTER            0xFFC014C4         /* TIMER3 Per Timer Counter Register */
+#define TIMER3_PERIOD             0xFFC014C8         /* TIMER3 Per Timer Period Register */
+#define TIMER3_WIDTH              0xFFC014CC         /* TIMER3 Per Timer Width Register */
+#define TIMER3_DELAY              0xFFC014D0         /* TIMER3 Per Timer Delay Register */
+
+#define TIMER4_CONFIG             0xFFC014E0         /* TIMER4 Per Timer Config Register */
+#define TIMER4_COUNTER            0xFFC014E4         /* TIMER4 Per Timer Counter Register */
+#define TIMER4_PERIOD             0xFFC014E8         /* TIMER4 Per Timer Period Register */
+#define TIMER4_WIDTH              0xFFC014EC         /* TIMER4 Per Timer Width Register */
+#define TIMER4_DELAY              0xFFC014F0         /* TIMER4 Per Timer Delay Register */
+
+#define TIMER5_CONFIG             0xFFC01500         /* TIMER5 Per Timer Config Register */
+#define TIMER5_COUNTER            0xFFC01504         /* TIMER5 Per Timer Counter Register */
+#define TIMER5_PERIOD             0xFFC01508         /* TIMER5 Per Timer Period Register */
+#define TIMER5_WIDTH              0xFFC0150C         /* TIMER5 Per Timer Width Register */
+#define TIMER5_DELAY              0xFFC01510         /* TIMER5 Per Timer Delay Register */
+
+#define TIMER6_CONFIG             0xFFC01520         /* TIMER6 Per Timer Config Register */
+#define TIMER6_COUNTER            0xFFC01524         /* TIMER6 Per Timer Counter Register */
+#define TIMER6_PERIOD             0xFFC01528         /* TIMER6 Per Timer Period Register */
+#define TIMER6_WIDTH              0xFFC0152C         /* TIMER6 Per Timer Width Register */
+#define TIMER6_DELAY              0xFFC01530         /* TIMER6 Per Timer Delay Register */
+
+#define TIMER7_CONFIG             0xFFC01540         /* TIMER7 Per Timer Config Register */
+#define TIMER7_COUNTER            0xFFC01544         /* TIMER7 Per Timer Counter Register */
+#define TIMER7_PERIOD             0xFFC01548         /* TIMER7 Per Timer Period Register */
+#define TIMER7_WIDTH              0xFFC0154C         /* TIMER7 Per Timer Width Register */
+#define TIMER7_DELAY              0xFFC01550         /* TIMER7 Per Timer Delay Register */
+
+/* =========================
+	CRC Registers
+   ========================= */
+
+/* =========================
+	CRC0
+   ========================= */
+#define REG_CRC0_CTL                    0xFFC01C00         /* CRC0 Control Register */
+#define REG_CRC0_DCNT                   0xFFC01C04         /* CRC0 Data Word Count Register */
+#define REG_CRC0_DCNTRLD                0xFFC01C08         /* CRC0 Data Word Count Reload Register */
+#define REG_CRC0_COMP                   0xFFC01C14         /* CRC0 DATA Compare Register */
+#define REG_CRC0_FILLVAL                0xFFC01C18         /* CRC0 Fill Value Register */
+#define REG_CRC0_DFIFO                  0xFFC01C1C         /* CRC0 DATA FIFO Register */
+#define REG_CRC0_INEN                   0xFFC01C20         /* CRC0 Interrupt Enable Register */
+#define REG_CRC0_INEN_SET               0xFFC01C24         /* CRC0 Interrupt Enable Set Register */
+#define REG_CRC0_INEN_CLR               0xFFC01C28         /* CRC0 Interrupt Enable Clear Register */
+#define REG_CRC0_POLY                   0xFFC01C2C         /* CRC0 Polynomial Register */
+#define REG_CRC0_STAT                   0xFFC01C40         /* CRC0 Status Register */
+#define REG_CRC0_DCNTCAP                0xFFC01C44         /* CRC0 DATA Count Capture Register */
+#define REG_CRC0_RESULT_FIN             0xFFC01C4C         /* CRC0 Final CRC Result Register */
+#define REG_CRC0_RESULT_CUR             0xFFC01C50         /* CRC0 Current CRC Result Register */
+#define REG_CRC0_REVID                  0xFFC01C60         /* CRC0 Revision ID Register */
+
+/* =========================
+	CRC1
+   ========================= */
+#define REG_CRC1_CTL                    0xFFC01D00         /* CRC1 Control Register */
+#define REG_CRC1_DCNT                   0xFFC01D04         /* CRC1 Data Word Count Register */
+#define REG_CRC1_DCNTRLD                0xFFC01D08         /* CRC1 Data Word Count Reload Register */
+#define REG_CRC1_COMP                   0xFFC01D14         /* CRC1 DATA Compare Register */
+#define REG_CRC1_FILLVAL                0xFFC01D18         /* CRC1 Fill Value Register */
+#define REG_CRC1_DFIFO                  0xFFC01D1C         /* CRC1 DATA FIFO Register */
+#define REG_CRC1_INEN                   0xFFC01D20         /* CRC1 Interrupt Enable Register */
+#define REG_CRC1_INEN_SET               0xFFC01D24         /* CRC1 Interrupt Enable Set Register */
+#define REG_CRC1_INEN_CLR               0xFFC01D28         /* CRC1 Interrupt Enable Clear Register */
+#define REG_CRC1_POLY                   0xFFC01D2C         /* CRC1 Polynomial Register */
+#define REG_CRC1_STAT                   0xFFC01D40         /* CRC1 Status Register */
+#define REG_CRC1_DCNTCAP                0xFFC01D44         /* CRC1 DATA Count Capture Register */
+#define REG_CRC1_RESULT_FIN             0xFFC01D4C         /* CRC1 Final CRC Result Register */
+#define REG_CRC1_RESULT_CUR             0xFFC01D50         /* CRC1 Current CRC Result Register */
+#define REG_CRC1_REVID                  0xFFC01D60         /* CRC1 Revision ID Register */
+
+/* =========================
+        TWI Registers
+   ========================= */
+
+/* =========================
+        TWI0
+   ========================= */
+#define TWI0_CLKDIV                    0xFFC01E00         /* TWI0 SCL Clock Divider */
+#define TWI0_CONTROL                   0xFFC01E04         /* TWI0 Control Register */
+#define TWI0_SLAVE_CTL                 0xFFC01E08         /* TWI0 Slave Mode Control Register */
+#define TWI0_SLAVE_STAT                0xFFC01E0C         /* TWI0 Slave Mode Status Register */
+#define TWI0_SLAVE_ADDR                0xFFC01E10         /* TWI0 Slave Mode Address Register */
+#define TWI0_MASTER_CTL                0xFFC01E14         /* TWI0 Master Mode Control Registers */
+#define TWI0_MASTER_STAT               0xFFC01E18         /* TWI0 Master Mode Status Register */
+#define TWI0_MASTER_ADDR               0xFFC01E1C         /* TWI0 Master Mode Address Register */
+#define TWI0_INT_STAT                  0xFFC01E20         /* TWI0 Interrupt Status Register */
+#define TWI0_INT_MASK                  0xFFC01E24         /* TWI0 Interrupt Mask Register */
+#define TWI0_FIFO_CTL                  0xFFC01E28         /* TWI0 FIFO Control Register */
+#define TWI0_FIFO_STAT                 0xFFC01E2C         /* TWI0 FIFO Status Register */
+#define TWI0_XMT_DATA8                 0xFFC01E80         /* TWI0 FIFO Transmit Data Single-Byte Register */
+#define TWI0_XMT_DATA16                0xFFC01E84         /* TWI0 FIFO Transmit Data Double-Byte Register */
+#define TWI0_RCV_DATA8                 0xFFC01E88         /* TWI0 FIFO Transmit Data Single-Byte Register */
+#define TWI0_RCV_DATA16                0xFFC01E8C         /* TWI0 FIFO Transmit Data Double-Byte Register */
+
+/* =========================
+        TWI1
+   ========================= */
+#define TWI1_CLKDIV                 0xFFC01F00         /* TWI1 SCL Clock Divider */
+#define TWI1_CONTROL                    0xFFC01F04         /* TWI1 Control Register */
+#define TWI1_SLAVE_CTL                 0xFFC01F08         /* TWI1 Slave Mode Control Register */
+#define TWI1_SLAVE_STAT                0xFFC01F0C         /* TWI1 Slave Mode Status Register */
+#define TWI1_SLAVE_ADDR                0xFFC01F10         /* TWI1 Slave Mode Address Register */
+#define TWI1_MASTER_CTL                0xFFC01F14         /* TWI1 Master Mode Control Registers */
+#define TWI1_MASTER_STAT               0xFFC01F18         /* TWI1 Master Mode Status Register */
+#define TWI1_MASTER_ADDR               0xFFC01F1C         /* TWI1 Master Mode Address Register */
+#define TWI1_INT_STAT                  0xFFC01F20         /* TWI1 Interrupt Status Register */
+#define TWI1_INT_MASK                   0xFFC01F24         /* TWI1 Interrupt Mask Register */
+#define TWI1_FIFO_CTL                0xFFC01F28         /* TWI1 FIFO Control Register */
+#define TWI1_FIFO_STAT               0xFFC01F2C         /* TWI1 FIFO Status Register */
+#define TWI1_XMT_DATA8                0xFFC01F80         /* TWI1 FIFO Transmit Data Single-Byte Register */
+#define TWI1_XMT_DATA16               0xFFC01F84         /* TWI1 FIFO Transmit Data Double-Byte Register */
+#define TWI1_RCV_DATA8                0xFFC01F88         /* TWI1 FIFO Transmit Data Single-Byte Register */
+#define TWI1_RCV_DATA16               0xFFC01F8C         /* TWI1 FIFO Transmit Data Double-Byte Register */
+
+
+/* =========================
+        UART Registers
+   ========================= */
+
+/* =========================
+        UART0
+   ========================= */
+#define UART0_REVID                 0xFFC02000         /* UART0 Revision ID Register */
+#define UART0_CTL                   0xFFC02004         /* UART0 Control Register */
+#define UART0_STAT                  0xFFC02008         /* UART0 Status Register */
+#define UART0_SCR                   0xFFC0200C         /* UART0 Scratch Register */
+#define UART0_CLK                   0xFFC02010         /* UART0 Clock Rate Register */
+#define UART0_IER                   0xFFC02014         /* UART0 Interrupt Mask Register */
+#define UART0_IER_SET               0xFFC02018         /* UART0 Interrupt Mask Set Register */
+#define UART0_IER_CLR               0xFFC0201C         /* UART0 Interrupt Mask Clear Register */
+#define UART0_RBR                   0xFFC02020         /* UART0 Receive Buffer Register */
+#define UART0_THR                   0xFFC02024         /* UART0 Transmit Hold Register */
+#define UART0_TAIP                  0xFFC02028         /* UART0 Transmit Address/Insert Pulse Register */
+#define UART0_TSR                   0xFFC0202C         /* UART0 Transmit Shift Register */
+#define UART0_RSR                   0xFFC02030         /* UART0 Receive Shift Register */
+#define UART0_TXDIV                 0xFFC02034         /* UART0 Transmit Clock Devider Register */
+#define UART0_RXDIV                 0xFFC02038         /* UART0 Receive Clock Devider Register */
+
+/* =========================
+        UART1
+   ========================= */
+#define UART1_REVID                 0xFFC02400         /* UART1 Revision ID Register */
+#define UART1_CTL                   0xFFC02404         /* UART1 Control Register */
+#define UART1_STAT                  0xFFC02408         /* UART1 Status Register */
+#define UART1_SCR                   0xFFC0240C         /* UART1 Scratch Register */
+#define UART1_CLK                   0xFFC02410         /* UART1 Clock Rate Register */
+#define UART1_IER                   0xFFC02414         /* UART1 Interrupt Mask Register */
+#define UART1_IER_SET               0xFFC02418         /* UART1 Interrupt Mask Set Register */
+#define UART1_IER_CLR               0xFFC0241C         /* UART1 Interrupt Mask Clear Register */
+#define UART1_RBR                   0xFFC02420         /* UART1 Receive Buffer Register */
+#define UART1_THR                   0xFFC02424         /* UART1 Transmit Hold Register */
+#define UART1_TAIP                  0xFFC02428         /* UART1 Transmit Address/Insert Pulse Register */
+#define UART1_TSR                   0xFFC0242C         /* UART1 Transmit Shift Register */
+#define UART1_RSR                   0xFFC02430         /* UART1 Receive Shift Register */
+#define UART1_TXDIV                 0xFFC02434         /* UART1 Transmit Clock Devider Register */
+#define UART1_RXDIV                 0xFFC02438         /* UART1 Receive Clock Devider Register */
+
+
+/* =========================
+        PORT Registers
+   ========================= */
+
+/* =========================
+        PORTA
+   ========================= */
+#define PORTA_FER                   0xFFC03000         /* PORTA Port x Function Enable Register */
+#define PORTA_FER_SET               0xFFC03004         /* PORTA Port x Function Enable Set Register */
+#define PORTA_FER_CLEAR               0xFFC03008         /* PORTA Port x Function Enable Clear Register */
+#define PORTA_DATA                  0xFFC0300C         /* PORTA Port x GPIO Data Register */
+#define PORTA_DATA_SET              0xFFC03010         /* PORTA Port x GPIO Data Set Register */
+#define PORTA_DATA_CLEAR              0xFFC03014         /* PORTA Port x GPIO Data Clear Register */
+#define PORTA_DIR                   0xFFC03018         /* PORTA Port x GPIO Direction Register */
+#define PORTA_DIR_SET               0xFFC0301C         /* PORTA Port x GPIO Direction Set Register */
+#define PORTA_DIR_CLEAR               0xFFC03020         /* PORTA Port x GPIO Direction Clear Register */
+#define PORTA_INEN                  0xFFC03024         /* PORTA Port x GPIO Input Enable Register */
+#define PORTA_INEN_SET              0xFFC03028         /* PORTA Port x GPIO Input Enable Set Register */
+#define PORTA_INEN_CLEAR              0xFFC0302C         /* PORTA Port x GPIO Input Enable Clear Register */
+#define PORTA_MUX                   0xFFC03030         /* PORTA Port x Multiplexer Control Register */
+#define PORTA_DATA_TGL              0xFFC03034         /* PORTA Port x GPIO Input Enable Toggle Register */
+#define PORTA_POL                   0xFFC03038         /* PORTA Port x GPIO Programming Inversion Register */
+#define PORTA_POL_SET               0xFFC0303C         /* PORTA Port x GPIO Programming Inversion Set Register */
+#define PORTA_POL_CLEAR               0xFFC03040         /* PORTA Port x GPIO Programming Inversion Clear Register */
+#define PORTA_LOCK                  0xFFC03044         /* PORTA Port x GPIO Lock Register */
+#define PORTA_REVID                 0xFFC0307C         /* PORTA Port x GPIO Revision ID */
+
+/* =========================
+        PORTB
+   ========================= */
+#define PORTB_FER                   0xFFC03080         /* PORTB Port x Function Enable Register */
+#define PORTB_FER_SET               0xFFC03084         /* PORTB Port x Function Enable Set Register */
+#define PORTB_FER_CLEAR               0xFFC03088         /* PORTB Port x Function Enable Clear Register */
+#define PORTB_DATA                  0xFFC0308C         /* PORTB Port x GPIO Data Register */
+#define PORTB_DATA_SET              0xFFC03090         /* PORTB Port x GPIO Data Set Register */
+#define PORTB_DATA_CLEAR              0xFFC03094         /* PORTB Port x GPIO Data Clear Register */
+#define PORTB_DIR                   0xFFC03098         /* PORTB Port x GPIO Direction Register */
+#define PORTB_DIR_SET               0xFFC0309C         /* PORTB Port x GPIO Direction Set Register */
+#define PORTB_DIR_CLEAR               0xFFC030A0         /* PORTB Port x GPIO Direction Clear Register */
+#define PORTB_INEN                  0xFFC030A4         /* PORTB Port x GPIO Input Enable Register */
+#define PORTB_INEN_SET              0xFFC030A8         /* PORTB Port x GPIO Input Enable Set Register */
+#define PORTB_INEN_CLEAR              0xFFC030AC         /* PORTB Port x GPIO Input Enable Clear Register */
+#define PORTB_MUX                   0xFFC030B0         /* PORTB Port x Multiplexer Control Register */
+#define PORTB_DATA_TGL              0xFFC030B4         /* PORTB Port x GPIO Input Enable Toggle Register */
+#define PORTB_POL                   0xFFC030B8         /* PORTB Port x GPIO Programming Inversion Register */
+#define PORTB_POL_SET               0xFFC030BC         /* PORTB Port x GPIO Programming Inversion Set Register */
+#define PORTB_POL_CLEAR               0xFFC030C0         /* PORTB Port x GPIO Programming Inversion Clear Register */
+#define PORTB_LOCK                  0xFFC030C4         /* PORTB Port x GPIO Lock Register */
+#define PORTB_REVID                 0xFFC030FC         /* PORTB Port x GPIO Revision ID */
+
+/* =========================
+        PORTC
+   ========================= */
+#define PORTC_FER                   0xFFC03100         /* PORTC Port x Function Enable Register */
+#define PORTC_FER_SET               0xFFC03104         /* PORTC Port x Function Enable Set Register */
+#define PORTC_FER_CLEAR               0xFFC03108         /* PORTC Port x Function Enable Clear Register */
+#define PORTC_DATA                  0xFFC0310C         /* PORTC Port x GPIO Data Register */
+#define PORTC_DATA_SET              0xFFC03110         /* PORTC Port x GPIO Data Set Register */
+#define PORTC_DATA_CLEAR              0xFFC03114         /* PORTC Port x GPIO Data Clear Register */
+#define PORTC_DIR                   0xFFC03118         /* PORTC Port x GPIO Direction Register */
+#define PORTC_DIR_SET               0xFFC0311C         /* PORTC Port x GPIO Direction Set Register */
+#define PORTC_DIR_CLEAR               0xFFC03120         /* PORTC Port x GPIO Direction Clear Register */
+#define PORTC_INEN                  0xFFC03124         /* PORTC Port x GPIO Input Enable Register */
+#define PORTC_INEN_SET              0xFFC03128         /* PORTC Port x GPIO Input Enable Set Register */
+#define PORTC_INEN_CLEAR              0xFFC0312C         /* PORTC Port x GPIO Input Enable Clear Register */
+#define PORTC_MUX                   0xFFC03130         /* PORTC Port x Multiplexer Control Register */
+#define PORTC_DATA_TGL              0xFFC03134         /* PORTC Port x GPIO Input Enable Toggle Register */
+#define PORTC_POL                   0xFFC03138         /* PORTC Port x GPIO Programming Inversion Register */
+#define PORTC_POL_SET               0xFFC0313C         /* PORTC Port x GPIO Programming Inversion Set Register */
+#define PORTC_POL_CLEAR               0xFFC03140         /* PORTC Port x GPIO Programming Inversion Clear Register */
+#define PORTC_LOCK                  0xFFC03144         /* PORTC Port x GPIO Lock Register */
+#define PORTC_REVID                 0xFFC0317C         /* PORTC Port x GPIO Revision ID */
+
+/* =========================
+        PORTD
+   ========================= */
+#define PORTD_FER                   0xFFC03180         /* PORTD Port x Function Enable Register */
+#define PORTD_FER_SET               0xFFC03184         /* PORTD Port x Function Enable Set Register */
+#define PORTD_FER_CLEAR               0xFFC03188         /* PORTD Port x Function Enable Clear Register */
+#define PORTD_DATA                  0xFFC0318C         /* PORTD Port x GPIO Data Register */
+#define PORTD_DATA_SET              0xFFC03190         /* PORTD Port x GPIO Data Set Register */
+#define PORTD_DATA_CLEAR              0xFFC03194         /* PORTD Port x GPIO Data Clear Register */
+#define PORTD_DIR                   0xFFC03198         /* PORTD Port x GPIO Direction Register */
+#define PORTD_DIR_SET               0xFFC0319C         /* PORTD Port x GPIO Direction Set Register */
+#define PORTD_DIR_CLEAR               0xFFC031A0         /* PORTD Port x GPIO Direction Clear Register */
+#define PORTD_INEN                  0xFFC031A4         /* PORTD Port x GPIO Input Enable Register */
+#define PORTD_INEN_SET              0xFFC031A8         /* PORTD Port x GPIO Input Enable Set Register */
+#define PORTD_INEN_CLEAR              0xFFC031AC         /* PORTD Port x GPIO Input Enable Clear Register */
+#define PORTD_MUX                   0xFFC031B0         /* PORTD Port x Multiplexer Control Register */
+#define PORTD_DATA_TGL              0xFFC031B4         /* PORTD Port x GPIO Input Enable Toggle Register */
+#define PORTD_POL                   0xFFC031B8         /* PORTD Port x GPIO Programming Inversion Register */
+#define PORTD_POL_SET               0xFFC031BC         /* PORTD Port x GPIO Programming Inversion Set Register */
+#define PORTD_POL_CLEAR               0xFFC031C0         /* PORTD Port x GPIO Programming Inversion Clear Register */
+#define PORTD_LOCK                  0xFFC031C4         /* PORTD Port x GPIO Lock Register */
+#define PORTD_REVID                 0xFFC031FC         /* PORTD Port x GPIO Revision ID */
+
+/* =========================
+        PORTE
+   ========================= */
+#define PORTE_FER                   0xFFC03200         /* PORTE Port x Function Enable Register */
+#define PORTE_FER_SET               0xFFC03204         /* PORTE Port x Function Enable Set Register */
+#define PORTE_FER_CLEAR               0xFFC03208         /* PORTE Port x Function Enable Clear Register */
+#define PORTE_DATA                  0xFFC0320C         /* PORTE Port x GPIO Data Register */
+#define PORTE_DATA_SET              0xFFC03210         /* PORTE Port x GPIO Data Set Register */
+#define PORTE_DATA_CLEAR              0xFFC03214         /* PORTE Port x GPIO Data Clear Register */
+#define PORTE_DIR                   0xFFC03218         /* PORTE Port x GPIO Direction Register */
+#define PORTE_DIR_SET               0xFFC0321C         /* PORTE Port x GPIO Direction Set Register */
+#define PORTE_DIR_CLEAR               0xFFC03220         /* PORTE Port x GPIO Direction Clear Register */
+#define PORTE_INEN                  0xFFC03224         /* PORTE Port x GPIO Input Enable Register */
+#define PORTE_INEN_SET              0xFFC03228         /* PORTE Port x GPIO Input Enable Set Register */
+#define PORTE_INEN_CLEAR              0xFFC0322C         /* PORTE Port x GPIO Input Enable Clear Register */
+#define PORTE_MUX                   0xFFC03230         /* PORTE Port x Multiplexer Control Register */
+#define PORTE_DATA_TGL              0xFFC03234         /* PORTE Port x GPIO Input Enable Toggle Register */
+#define PORTE_POL                   0xFFC03238         /* PORTE Port x GPIO Programming Inversion Register */
+#define PORTE_POL_SET               0xFFC0323C         /* PORTE Port x GPIO Programming Inversion Set Register */
+#define PORTE_POL_CLEAR               0xFFC03240         /* PORTE Port x GPIO Programming Inversion Clear Register */
+#define PORTE_LOCK                  0xFFC03244         /* PORTE Port x GPIO Lock Register */
+#define PORTE_REVID                 0xFFC0327C         /* PORTE Port x GPIO Revision ID */
+
+/* =========================
+        PORTF
+   ========================= */
+#define PORTF_FER                   0xFFC03280         /* PORTF Port x Function Enable Register */
+#define PORTF_FER_SET               0xFFC03284         /* PORTF Port x Function Enable Set Register */
+#define PORTF_FER_CLEAR               0xFFC03288         /* PORTF Port x Function Enable Clear Register */
+#define PORTF_DATA                  0xFFC0328C         /* PORTF Port x GPIO Data Register */
+#define PORTF_DATA_SET              0xFFC03290         /* PORTF Port x GPIO Data Set Register */
+#define PORTF_DATA_CLEAR              0xFFC03294         /* PORTF Port x GPIO Data Clear Register */
+#define PORTF_DIR                   0xFFC03298         /* PORTF Port x GPIO Direction Register */
+#define PORTF_DIR_SET               0xFFC0329C         /* PORTF Port x GPIO Direction Set Register */
+#define PORTF_DIR_CLEAR               0xFFC032A0         /* PORTF Port x GPIO Direction Clear Register */
+#define PORTF_INEN                  0xFFC032A4         /* PORTF Port x GPIO Input Enable Register */
+#define PORTF_INEN_SET              0xFFC032A8         /* PORTF Port x GPIO Input Enable Set Register */
+#define PORTF_INEN_CLEAR              0xFFC032AC         /* PORTF Port x GPIO Input Enable Clear Register */
+#define PORTF_MUX                   0xFFC032B0         /* PORTF Port x Multiplexer Control Register */
+#define PORTF_DATA_TGL              0xFFC032B4         /* PORTF Port x GPIO Input Enable Toggle Register */
+#define PORTF_POL                   0xFFC032B8         /* PORTF Port x GPIO Programming Inversion Register */
+#define PORTF_POL_SET               0xFFC032BC         /* PORTF Port x GPIO Programming Inversion Set Register */
+#define PORTF_POL_CLEAR               0xFFC032C0         /* PORTF Port x GPIO Programming Inversion Clear Register */
+#define PORTF_LOCK                  0xFFC032C4         /* PORTF Port x GPIO Lock Register */
+#define PORTF_REVID                 0xFFC032FC         /* PORTF Port x GPIO Revision ID */
+
+/* =========================
+        PORTG
+   ========================= */
+#define PORTG_FER                   0xFFC03300         /* PORTG Port x Function Enable Register */
+#define PORTG_FER_SET               0xFFC03304         /* PORTG Port x Function Enable Set Register */
+#define PORTG_FER_CLEAR               0xFFC03308         /* PORTG Port x Function Enable Clear Register */
+#define PORTG_DATA                  0xFFC0330C         /* PORTG Port x GPIO Data Register */
+#define PORTG_DATA_SET              0xFFC03310         /* PORTG Port x GPIO Data Set Register */
+#define PORTG_DATA_CLEAR              0xFFC03314         /* PORTG Port x GPIO Data Clear Register */
+#define PORTG_DIR                   0xFFC03318         /* PORTG Port x GPIO Direction Register */
+#define PORTG_DIR_SET               0xFFC0331C         /* PORTG Port x GPIO Direction Set Register */
+#define PORTG_DIR_CLEAR               0xFFC03320         /* PORTG Port x GPIO Direction Clear Register */
+#define PORTG_INEN                  0xFFC03324         /* PORTG Port x GPIO Input Enable Register */
+#define PORTG_INEN_SET              0xFFC03328         /* PORTG Port x GPIO Input Enable Set Register */
+#define PORTG_INEN_CLEAR              0xFFC0332C         /* PORTG Port x GPIO Input Enable Clear Register */
+#define PORTG_MUX                   0xFFC03330         /* PORTG Port x Multiplexer Control Register */
+#define PORTG_DATA_TGL              0xFFC03334         /* PORTG Port x GPIO Input Enable Toggle Register */
+#define PORTG_POL                   0xFFC03338         /* PORTG Port x GPIO Programming Inversion Register */
+#define PORTG_POL_SET               0xFFC0333C         /* PORTG Port x GPIO Programming Inversion Set Register */
+#define PORTG_POL_CLEAR               0xFFC03340         /* PORTG Port x GPIO Programming Inversion Clear Register */
+#define PORTG_LOCK                  0xFFC03344         /* PORTG Port x GPIO Lock Register */
+#define PORTG_REVID                 0xFFC0337C         /* PORTG Port x GPIO Revision ID */
+
+/* ==================================================
+        Pads Controller Registers
+   ================================================== */
+
+/* =========================
+        PADS0
+   ========================= */
+#define PADS0_EMAC_PTP_CLKSEL	    0xFFC03404         /* PADS0 Clock Selection for EMAC and PTP */
+#define PADS0_TWI_VSEL		    0xFFC03408         /* PADS0 TWI Voltage Selection */
+#define PADS0_PORTS_HYST	    0xFFC03440         /* PADS0 Hysteresis Enable Register */
+
+/* =========================
+        PINT Registers
+   ========================= */
+
+/* =========================
+        PINT0
+   ========================= */
+#define PINT0_MASK_SET              0xFFC04000         /* PINT0 Pint Mask Set Register */
+#define PINT0_MASK_CLEAR            0xFFC04004         /* PINT0 Pint Mask Clear Register */
+#define PINT0_REQUEST               0xFFC04008         /* PINT0 Pint Request Register */
+#define PINT0_ASSIGN                0xFFC0400C         /* PINT0 Pint Assign Register */
+#define PINT0_EDGE_SET              0xFFC04010         /* PINT0 Pint Edge Set Register */
+#define PINT0_EDGE_CLEAR            0xFFC04014         /* PINT0 Pint Edge Clear Register */
+#define PINT0_INVERT_SET            0xFFC04018         /* PINT0 Pint Invert Set Register */
+#define PINT0_INVERT_CLEAR          0xFFC0401C         /* PINT0 Pint Invert Clear Register */
+#define PINT0_PINSTATE              0xFFC04020         /* PINT0 Pint Pinstate Register */
+#define PINT0_LATCH                 0xFFC04024         /* PINT0 Pint Latch Register */
+
+/* =========================
+        PINT1
+   ========================= */
+#define PINT1_MASK_SET              0xFFC04100         /* PINT1 Pint Mask Set Register */
+#define PINT1_MASK_CLEAR            0xFFC04104         /* PINT1 Pint Mask Clear Register */
+#define PINT1_REQUEST               0xFFC04108         /* PINT1 Pint Request Register */
+#define PINT1_ASSIGN                0xFFC0410C         /* PINT1 Pint Assign Register */
+#define PINT1_EDGE_SET              0xFFC04110         /* PINT1 Pint Edge Set Register */
+#define PINT1_EDGE_CLEAR            0xFFC04114         /* PINT1 Pint Edge Clear Register */
+#define PINT1_INVERT_SET            0xFFC04118         /* PINT1 Pint Invert Set Register */
+#define PINT1_INVERT_CLEAR          0xFFC0411C         /* PINT1 Pint Invert Clear Register */
+#define PINT1_PINSTATE              0xFFC04120         /* PINT1 Pint Pinstate Register */
+#define PINT1_LATCH                 0xFFC04124         /* PINT1 Pint Latch Register */
+
+/* =========================
+        PINT2
+   ========================= */
+#define PINT2_MASK_SET              0xFFC04200         /* PINT2 Pint Mask Set Register */
+#define PINT2_MASK_CLEAR            0xFFC04204         /* PINT2 Pint Mask Clear Register */
+#define PINT2_REQUEST               0xFFC04208         /* PINT2 Pint Request Register */
+#define PINT2_ASSIGN                0xFFC0420C         /* PINT2 Pint Assign Register */
+#define PINT2_EDGE_SET              0xFFC04210         /* PINT2 Pint Edge Set Register */
+#define PINT2_EDGE_CLEAR            0xFFC04214         /* PINT2 Pint Edge Clear Register */
+#define PINT2_INVERT_SET            0xFFC04218         /* PINT2 Pint Invert Set Register */
+#define PINT2_INVERT_CLEAR          0xFFC0421C         /* PINT2 Pint Invert Clear Register */
+#define PINT2_PINSTATE              0xFFC04220         /* PINT2 Pint Pinstate Register */
+#define PINT2_LATCH                 0xFFC04224         /* PINT2 Pint Latch Register */
+
+/* =========================
+        PINT3
+   ========================= */
+#define PINT3_MASK_SET              0xFFC04300         /* PINT3 Pint Mask Set Register */
+#define PINT3_MASK_CLEAR            0xFFC04304         /* PINT3 Pint Mask Clear Register */
+#define PINT3_REQUEST               0xFFC04308         /* PINT3 Pint Request Register */
+#define PINT3_ASSIGN                0xFFC0430C         /* PINT3 Pint Assign Register */
+#define PINT3_EDGE_SET              0xFFC04310         /* PINT3 Pint Edge Set Register */
+#define PINT3_EDGE_CLEAR            0xFFC04314         /* PINT3 Pint Edge Clear Register */
+#define PINT3_INVERT_SET            0xFFC04318         /* PINT3 Pint Invert Set Register */
+#define PINT3_INVERT_CLEAR          0xFFC0431C         /* PINT3 Pint Invert Clear Register */
+#define PINT3_PINSTATE              0xFFC04320         /* PINT3 Pint Pinstate Register */
+#define PINT3_LATCH                 0xFFC04324         /* PINT3 Pint Latch Register */
+
+/* =========================
+        PINT4
+   ========================= */
+#define PINT4_MASK_SET              0xFFC04400         /* PINT4 Pint Mask Set Register */
+#define PINT4_MASK_CLEAR            0xFFC04404         /* PINT4 Pint Mask Clear Register */
+#define PINT4_REQUEST               0xFFC04408         /* PINT4 Pint Request Register */
+#define PINT4_ASSIGN                0xFFC0440C         /* PINT4 Pint Assign Register */
+#define PINT4_EDGE_SET              0xFFC04410         /* PINT4 Pint Edge Set Register */
+#define PINT4_EDGE_CLEAR            0xFFC04414         /* PINT4 Pint Edge Clear Register */
+#define PINT4_INVERT_SET            0xFFC04418         /* PINT4 Pint Invert Set Register */
+#define PINT4_INVERT_CLEAR          0xFFC0441C         /* PINT4 Pint Invert Clear Register */
+#define PINT4_PINSTATE              0xFFC04420         /* PINT4 Pint Pinstate Register */
+#define PINT4_LATCH                 0xFFC04424         /* PINT4 Pint Latch Register */
+
+/* =========================
+        PINT5
+   ========================= */
+#define PINT5_MASK_SET              0xFFC04500         /* PINT5 Pint Mask Set Register */
+#define PINT5_MASK_CLEAR            0xFFC04504         /* PINT5 Pint Mask Clear Register */
+#define PINT5_REQUEST               0xFFC04508         /* PINT5 Pint Request Register */
+#define PINT5_ASSIGN                0xFFC0450C         /* PINT5 Pint Assign Register */
+#define PINT5_EDGE_SET              0xFFC04510         /* PINT5 Pint Edge Set Register */
+#define PINT5_EDGE_CLEAR            0xFFC04514         /* PINT5 Pint Edge Clear Register */
+#define PINT5_INVERT_SET            0xFFC04518         /* PINT5 Pint Invert Set Register */
+#define PINT5_INVERT_CLEAR          0xFFC0451C         /* PINT5 Pint Invert Clear Register */
+#define PINT5_PINSTATE              0xFFC04520         /* PINT5 Pint Pinstate Register */
+#define PINT5_LATCH                 0xFFC04524         /* PINT5 Pint Latch Register */
+
+
+/* =========================
+        SMC Registers
+   ========================= */
+
+/* =========================
+        SMC0
+   ========================= */
+#define SMC_GCTL                   0xFFC16004         /* SMC0 SMC Control Register */
+#define SMC_GSTAT                  0xFFC16008         /* SMC0 SMC Status Register */
+#define SMC_B0CTL                  0xFFC1600C         /* SMC0 SMC Bank0 Control Register */
+#define SMC_B0TIM                  0xFFC16010         /* SMC0 SMC Bank0 Timing Register */
+#define SMC_B0ETIM                 0xFFC16014         /* SMC0 SMC Bank0 Extended Timing Register */
+#define SMC_B1CTL                  0xFFC1601C         /* SMC0 SMC BANK1 Control Register */
+#define SMC_B1TIM                  0xFFC16020         /* SMC0 SMC BANK1 Timing Register */
+#define SMC_B1ETIM                 0xFFC16024         /* SMC0 SMC BANK1 Extended Timing Register */
+#define SMC_B2CTL                  0xFFC1602C         /* SMC0 SMC BANK2 Control Register */
+#define SMC_B2TIM                  0xFFC16030         /* SMC0 SMC BANK2 Timing Register */
+#define SMC_B2ETIM                 0xFFC16034         /* SMC0 SMC BANK2 Extended Timing Register */
+#define SMC_B3CTL                  0xFFC1603C         /* SMC0 SMC BANK3 Control Register */
+#define SMC_B3TIM                  0xFFC16040         /* SMC0 SMC BANK3 Timing Register */
+#define SMC_B3ETIM                 0xFFC16044         /* SMC0 SMC BANK3 Extended Timing Register */
+
+
+/* =========================
+        WDOG Registers
+   ========================= */
+
+/* =========================
+        WDOG0
+   ========================= */
+#define WDOG0_CTL                   0xFFC17000         /* WDOG0 Control Register */
+#define WDOG0_CNT                   0xFFC17004         /* WDOG0 Count Register */
+#define WDOG0_STAT                  0xFFC17008         /* WDOG0 Watchdog Timer Status Register */
+#define WDOG_CTL		WDOG0_CTL
+#define WDOG_CNT		WDOG0_CNT
+#define WDOG_STAT		WDOG0_STAT
+
+/* =========================
+        WDOG1
+   ========================= */
+#define WDOG1_CTL                   0xFFC17800         /* WDOG1 Control Register */
+#define WDOG1_CNT                   0xFFC17804         /* WDOG1 Count Register */
+#define WDOG1_STAT                  0xFFC17808         /* WDOG1 Watchdog Timer Status Register */
+
+
+/* =========================
+        SDU Registers
+   ========================= */
+
+/* =========================
+        SDU0
+   ========================= */
+#define SDU0_IDCODE                 0xFFC1F020         /* SDU0 ID Code Register */
+#define SDU0_CTL                    0xFFC1F050         /* SDU0 Control Register */
+#define SDU0_STAT                   0xFFC1F054         /* SDU0 Status Register */
+#define SDU0_MACCTL                 0xFFC1F058         /* SDU0 Memory Access Control Register */
+#define SDU0_MACADDR                0xFFC1F05C         /* SDU0 Memory Access Address Register */
+#define SDU0_MACDATA                0xFFC1F060         /* SDU0 Memory Access Data Register */
+#define SDU0_DMARD                  0xFFC1F064         /* SDU0 DMA Read Data Register */
+#define SDU0_DMAWD                  0xFFC1F068         /* SDU0 DMA Write Data Register */
+#define SDU0_MSG                    0xFFC1F080         /* SDU0 Message Register */
+#define SDU0_MSG_SET                0xFFC1F084         /* SDU0 Message Set Register */
+#define SDU0_MSG_CLR                0xFFC1F088         /* SDU0 Message Clear Register */
+#define SDU0_GHLT                   0xFFC1F08C         /* SDU0 Group Halt Register */
+
+
+/* =========================
+        EMAC Registers
+   ========================= */
+/* =========================
+        EMAC0
+   ========================= */
+#define EMAC0_MACCFG                0xFFC20000         /* EMAC0 MAC Configuration Register */
+#define EMAC0_MACFRMFILT            0xFFC20004         /* EMAC0 Filter Register for filtering Received Frames */
+#define EMAC0_HASHTBL_HI            0xFFC20008         /* EMAC0 Contains the Upper 32 bits of the hash table */
+#define EMAC0_HASHTBL_LO            0xFFC2000C         /* EMAC0 Contains the lower 32 bits of the hash table */
+#define EMAC0_GMII_ADDR             0xFFC20010         /* EMAC0 Management Address Register */
+#define EMAC0_GMII_DATA             0xFFC20014         /* EMAC0 Management Data Register */
+#define EMAC0_FLOWCTL               0xFFC20018         /* EMAC0 MAC FLow Control Register */
+#define EMAC0_VLANTAG               0xFFC2001C         /* EMAC0 VLAN Tag Register */
+#define EMAC0_VER                   0xFFC20020         /* EMAC0 EMAC Version Register */
+#define EMAC0_DBG                   0xFFC20024         /* EMAC0 EMAC Debug Register */
+#define EMAC0_RMTWKUP               0xFFC20028         /* EMAC0 Remote wake up frame register */
+#define EMAC0_PMT_CTLSTAT           0xFFC2002C         /* EMAC0 PMT Control and Status Register */
+#define EMAC0_ISTAT                 0xFFC20038         /* EMAC0 EMAC Interrupt Status Register */
+#define EMAC0_IMSK                  0xFFC2003C         /* EMAC0 EMAC Interrupt Mask Register */
+#define EMAC0_ADDR0_HI              0xFFC20040         /* EMAC0 EMAC Address0 High Register */
+#define EMAC0_ADDR0_LO              0xFFC20044         /* EMAC0 EMAC Address0 Low Register */
+#define EMAC0_MMC_CTL               0xFFC20100         /* EMAC0 MMC Control Register */
+#define EMAC0_MMC_RXINT             0xFFC20104         /* EMAC0 MMC RX Interrupt Register */
+#define EMAC0_MMC_TXINT             0xFFC20108         /* EMAC0 MMC TX Interrupt Register */
+#define EMAC0_MMC_RXIMSK            0xFFC2010C         /* EMAC0 MMC RX Interrupt Mask Register */
+#define EMAC0_MMC_TXIMSK            0xFFC20110         /* EMAC0 MMC TX Interrupt Mask Register */
+#define EMAC0_TXOCTCNT_GB           0xFFC20114         /* EMAC0 Num bytes transmitted exclusive of preamble */
+#define EMAC0_TXFRMCNT_GB           0xFFC20118         /* EMAC0 Num frames transmitted exclusive of retired */
+#define EMAC0_TXBCASTFRM_G          0xFFC2011C         /* EMAC0 Number of good broadcast frames transmitted. */
+#define EMAC0_TXMCASTFRM_G          0xFFC20120         /* EMAC0 Number of good multicast frames transmitted. */
+#define EMAC0_TX64_GB               0xFFC20124         /* EMAC0 Number of 64 byte length frames */
+#define EMAC0_TX65TO127_GB          0xFFC20128         /* EMAC0 Number of frames of length b/w 65-127 (inclusive) bytes */
+#define EMAC0_TX128TO255_GB         0xFFC2012C         /* EMAC0 Number of frames of length b/w 128-255 (inclusive) bytes */
+#define EMAC0_TX256TO511_GB         0xFFC20130         /* EMAC0 Number of frames of length b/w 256-511 (inclusive) bytes */
+#define EMAC0_TX512TO1023_GB        0xFFC20134         /* EMAC0 Number of frames of length b/w 512-1023 (inclusive) bytes */
+#define EMAC0_TX1024TOMAX_GB        0xFFC20138         /* EMAC0 Number of frames of length b/w 1024-max (inclusive) bytes */
+#define EMAC0_TXUCASTFRM_GB         0xFFC2013C         /* EMAC0 Number of good and bad unicast frames transmitted */
+#define EMAC0_TXMCASTFRM_GB         0xFFC20140         /* EMAC0 Number of good and bad multicast frames transmitted */
+#define EMAC0_TXBCASTFRM_GB         0xFFC20144         /* EMAC0 Number of good and bad broadcast frames transmitted */
+#define EMAC0_TXUNDR_ERR            0xFFC20148         /* EMAC0 Number of frames aborted due to frame underflow error */
+#define EMAC0_TXSNGCOL_G            0xFFC2014C         /* EMAC0 Number of transmitted frames after single collision */
+#define EMAC0_TXMULTCOL_G           0xFFC20150         /* EMAC0 Number of transmitted frames with more than one collision */
+#define EMAC0_TXDEFERRED            0xFFC20154         /* EMAC0 Number of transmitted frames after deferral */
+#define EMAC0_TXLATECOL             0xFFC20158         /* EMAC0 Number of frames aborted due to late collision error */
+#define EMAC0_TXEXCESSCOL           0xFFC2015C         /* EMAC0 Number of aborted frames due to excessive collisions */
+#define EMAC0_TXCARR_ERR            0xFFC20160         /* EMAC0 Number of aborted frames due to carrier sense error */
+#define EMAC0_TXOCTCNT_G            0xFFC20164         /* EMAC0 Number of bytes transmitted in good frames only */
+#define EMAC0_TXFRMCNT_G            0xFFC20168         /* EMAC0 Number of good frames transmitted. */
+#define EMAC0_TXEXCESSDEF           0xFFC2016C         /* EMAC0 Number of frames aborted due to excessive deferral */
+#define EMAC0_TXPAUSEFRM            0xFFC20170         /* EMAC0 Number of good PAUSE frames transmitted. */
+#define EMAC0_TXVLANFRM_G           0xFFC20174         /* EMAC0 Number of VLAN frames transmitted */
+#define EMAC0_RXFRMCNT_GB           0xFFC20180         /* EMAC0 Number of good and bad frames received. */
+#define EMAC0_RXOCTCNT_GB           0xFFC20184         /* EMAC0 Number of bytes received in good and bad frames */
+#define EMAC0_RXOCTCNT_G            0xFFC20188         /* EMAC0 Number of bytes received only in good frames */
+#define EMAC0_RXBCASTFRM_G          0xFFC2018C         /* EMAC0 Number of good broadcast frames received. */
+#define EMAC0_RXMCASTFRM_G          0xFFC20190         /* EMAC0 Number of good multicast frames received */
+#define EMAC0_RXCRC_ERR             0xFFC20194         /* EMAC0 Number of frames received with CRC error */
+#define EMAC0_RXALIGN_ERR           0xFFC20198         /* EMAC0 Number of frames with alignment error */
+#define EMAC0_RXRUNT_ERR            0xFFC2019C         /* EMAC0 Number of frames received with runt error. */
+#define EMAC0_RXJAB_ERR             0xFFC201A0         /* EMAC0 Number of frames received with length greater than 1518 */
+#define EMAC0_RXUSIZE_G             0xFFC201A4         /* EMAC0 Number of frames received with length 64 */
+#define EMAC0_RXOSIZE_G             0xFFC201A8         /* EMAC0 Number of frames received with length greater than maxium */
+#define EMAC0_RX64_GB               0xFFC201AC         /* EMAC0 Number of good and bad frames of lengh 64 bytes */
+#define EMAC0_RX65TO127_GB          0xFFC201B0         /* EMAC0 Number of good and bad frame between 64-127(inclusive) */
+#define EMAC0_RX128TO255_GB         0xFFC201B4         /* EMAC0 Number of good and bad frames received with length between 128 and 255 (inclusive) bytes, exclusive of preamble. */
+#define EMAC0_RX256TO511_GB         0xFFC201B8         /* EMAC0 Number of good and bad frames between 256-511(inclusive) */
+#define EMAC0_RX512TO1023_GB        0xFFC201BC         /* EMAC0 Number of good and bad frames received between 512-1023 */
+#define EMAC0_RX1024TOMAX_GB        0xFFC201C0         /* EMAC0 Number of frames received between 1024 and maxsize */
+#define EMAC0_RXUCASTFRM_G          0xFFC201C4         /* EMAC0 Number of good unicast frames received. */
+#define EMAC0_RXLEN_ERR             0xFFC201C8         /* EMAC0 Number of frames received with length error */
+#define EMAC0_RXOORTYPE             0xFFC201CC         /* EMAC0 Number of frames with length not equal to valid frame size */
+#define EMAC0_RXPAUSEFRM            0xFFC201D0         /* EMAC0 Number of good and valid PAUSE frames received. */
+#define EMAC0_RXFIFO_OVF            0xFFC201D4         /* EMAC0 Number of missed received frames due to FIFO overflow. This counter is not present in the GMAC-CORE configuration. */
+#define EMAC0_RXVLANFRM_GB          0xFFC201D8         /* EMAC0 Number of good and bad VLAN frames received. */
+#define EMAC0_RXWDOG_ERR            0xFFC201DC         /* EMAC0 Frames received with error due to watchdog timeout */
+#define EMAC0_IPC_RXIMSK            0xFFC20200         /* EMAC0 MMC IPC RX Interrupt Mask Register */
+#define EMAC0_IPC_RXINT             0xFFC20208         /* EMAC0 MMC IPC RX Interrupt Register */
+#define EMAC0_RXIPV4_GD_FRM         0xFFC20210         /* EMAC0 Number of good IPv4 datagrams */
+#define EMAC0_RXIPV4_HDR_ERR_FRM    0xFFC20214         /* EMAC0 Number of IPv4 datagrams with header errors */
+#define EMAC0_RXIPV4_NOPAY_FRM      0xFFC20218         /* EMAC0 Number of IPv4 datagrams without checksum */
+#define EMAC0_RXIPV4_FRAG_FRM       0xFFC2021C         /* EMAC0 Number of good IPv4 datagrams with fragmentation */
+#define EMAC0_RXIPV4_UDSBL_FRM      0xFFC20220         /* EMAC0 Number of IPv4 UDP datagrams with disabled checksum */
+#define EMAC0_RXIPV6_GD_FRM         0xFFC20224         /* EMAC0 Number of IPv4 datagrams with TCP/UDP/ICMP payloads */
+#define EMAC0_RXIPV6_HDR_ERR_FRM    0xFFC20228         /* EMAC0 Number of IPv6 datagrams with header errors */
+#define EMAC0_RXIPV6_NOPAY_FRM      0xFFC2022C         /* EMAC0 Number of IPv6 datagrams with no TCP/UDP/ICMP payload */
+#define EMAC0_RXUDP_GD_FRM          0xFFC20230         /* EMAC0 Number of good IP datagrames with good UDP payload */
+#define EMAC0_RXUDP_ERR_FRM         0xFFC20234         /* EMAC0 Number of good IP datagrams with UDP checksum errors */
+#define EMAC0_RXTCP_GD_FRM          0xFFC20238         /* EMAC0 Number of good IP datagrams with a good TCP payload */
+#define EMAC0_RXTCP_ERR_FRM         0xFFC2023C         /* EMAC0 Number of good IP datagrams with TCP checksum errors */
+#define EMAC0_RXICMP_GD_FRM         0xFFC20240         /* EMAC0 Number of good IP datagrams with a good ICMP payload */
+#define EMAC0_RXICMP_ERR_FRM        0xFFC20244         /* EMAC0 Number of good IP datagrams with ICMP checksum errors */
+#define EMAC0_RXIPV4_GD_OCT         0xFFC20250         /* EMAC0 Bytes received in IPv4 datagrams including tcp,udp or icmp */
+#define EMAC0_RXIPV4_HDR_ERR_OCT    0xFFC20254         /* EMAC0 Bytes received in IPv4 datagrams with header errors */
+#define EMAC0_RXIPV4_NOPAY_OCT      0xFFC20258         /* EMAC0 Bytes received in IPv4 datagrams without tcp,udp,icmp load */
+#define EMAC0_RXIPV4_FRAG_OCT       0xFFC2025C         /* EMAC0 Bytes received in fragmented IPv4 datagrams */
+#define EMAC0_RXIPV4_UDSBL_OCT      0xFFC20260         /* EMAC0 Bytes received in UDP segment with checksum disabled */
+#define EMAC0_RXIPV6_GD_OCT         0xFFC20264         /* EMAC0 Bytes received in good IPv6  including tcp,udp or icmp load */
+#define EMAC0_RXIPV6_HDR_ERR_OCT    0xFFC20268         /* EMAC0 Number of bytes received in IPv6 with header errors */
+#define EMAC0_RXIPV6_NOPAY_OCT      0xFFC2026C         /* EMAC0 Bytes received in IPv6 without tcp,udp or icmp load */
+#define EMAC0_RXUDP_GD_OCT          0xFFC20270         /* EMAC0 Number of bytes received in good UDP segments */
+#define EMAC0_RXUDP_ERR_OCT         0xFFC20274         /* EMAC0 Number of bytes received in UDP segment with checksum err */
+#define EMAC0_RXTCP_GD_OCT          0xFFC20278         /* EMAC0 Number of bytes received in a good TCP segment */
+#define EMAC0_RXTCP_ERR_OCT         0xFFC2027C         /* EMAC0 Number of bytes received in TCP segment with checksum err */
+#define EMAC0_RXICMP_GD_OCT         0xFFC20280         /* EMAC0 Number of bytes received in a good ICMP segment */
+#define EMAC0_RXICMP_ERR_OCT        0xFFC20284         /* EMAC0 Bytes received in an ICMP segment with checksum errors */
+#define EMAC0_TM_CTL                0xFFC20700         /* EMAC0 EMAC Time Stamp Control Register */
+#define EMAC0_TM_SUBSEC             0xFFC20704         /* EMAC0 EMAC Time Stamp Sub Second Increment */
+#define EMAC0_TM_SEC                0xFFC20708         /* EMAC0 EMAC Time Stamp Second Register */
+#define EMAC0_TM_NSEC               0xFFC2070C         /* EMAC0 EMAC Time Stamp Nano Second Register */
+#define EMAC0_TM_SECUPDT            0xFFC20710         /* EMAC0 EMAC Time Stamp Seconds Update */
+#define EMAC0_TM_NSECUPDT           0xFFC20714         /* EMAC0 EMAC Time Stamp Nano Seconds Update */
+#define EMAC0_TM_ADDEND             0xFFC20718         /* EMAC0 EMAC Time Stamp Addend Register */
+#define EMAC0_TM_TGTM               0xFFC2071C         /* EMAC0 EMAC Time Stamp Target Time Sec. */
+#define EMAC0_TM_NTGTM              0xFFC20720         /* EMAC0 EMAC Time Stamp Target Time Nanosec. */
+#define EMAC0_TM_HISEC              0xFFC20724         /* EMAC0 EMAC Time Stamp High Second Register */
+#define EMAC0_TM_STMPSTAT           0xFFC20728         /* EMAC0 EMAC Time Stamp Status Register */
+#define EMAC0_TM_PPSCTL             0xFFC2072C         /* EMAC0 EMAC PPS Control Register */
+#define EMAC0_TM_AUXSTMP_NSEC       0xFFC20730         /* EMAC0 EMAC Auxillary Time Stamp Nano Register */
+#define EMAC0_TM_AUXSTMP_SEC        0xFFC20734         /* EMAC0 EMAC Auxillary Time Stamp Sec Register */
+#define EMAC0_DMA_BUSMODE           0xFFC21000         /* EMAC0 Bus Operating Modes for EMAC DMA */
+#define EMAC0_DMA_TXPOLL            0xFFC21004         /* EMAC0 TX DMA Poll demand register */
+#define EMAC0_DMA_RXPOLL            0xFFC21008         /* EMAC0 RX DMA Poll demand register */
+#define EMAC0_DMA_RXDSC_ADDR        0xFFC2100C         /* EMAC0 RX Descriptor List Address */
+#define EMAC0_DMA_TXDSC_ADDR        0xFFC21010         /* EMAC0 TX Descriptor List Address */
+#define EMAC0_DMA_STAT              0xFFC21014         /* EMAC0 DMA Status Register */
+#define EMAC0_DMA_OPMODE            0xFFC21018         /* EMAC0 DMA Operation Mode Register */
+#define EMAC0_DMA_IEN               0xFFC2101C         /* EMAC0 DMA Interrupt Enable Register */
+#define EMAC0_DMA_MISS_FRM          0xFFC21020         /* EMAC0 DMA missed frame and buffer overflow counter */
+#define EMAC0_DMA_RXIWDOG           0xFFC21024         /* EMAC0 DMA RX Interrupt Watch Dog timer */
+#define EMAC0_DMA_BMMODE            0xFFC21028         /* EMAC0 AXI Bus Mode Register */
+#define EMAC0_DMA_BMSTAT            0xFFC2102C         /* EMAC0 AXI Status Register */
+#define EMAC0_DMA_TXDSC_CUR         0xFFC21048         /* EMAC0 TX current descriptor register */
+#define EMAC0_DMA_RXDSC_CUR         0xFFC2104C         /* EMAC0 RX current descriptor register */
+#define EMAC0_DMA_TXBUF_CUR         0xFFC21050         /* EMAC0 TX current buffer pointer register */
+#define EMAC0_DMA_RXBUF_CUR         0xFFC21054         /* EMAC0 RX current buffer pointer register */
+#define EMAC0_HWFEAT                0xFFC21058         /* EMAC0 Hardware Feature Register */
+
+/* =========================
+        EMAC1
+   ========================= */
+#define EMAC1_MACCFG                0xFFC22000         /* EMAC1 MAC Configuration Register */
+#define EMAC1_MACFRMFILT            0xFFC22004         /* EMAC1 Filter Register for filtering Received Frames */
+#define EMAC1_HASHTBL_HI            0xFFC22008         /* EMAC1 Contains the Upper 32 bits of the hash table */
+#define EMAC1_HASHTBL_LO            0xFFC2200C         /* EMAC1 Contains the lower 32 bits of the hash table */
+#define EMAC1_GMII_ADDR             0xFFC22010         /* EMAC1 Management Address Register */
+#define EMAC1_GMII_DATA             0xFFC22014         /* EMAC1 Management Data Register */
+#define EMAC1_FLOWCTL               0xFFC22018         /* EMAC1 MAC FLow Control Register */
+#define EMAC1_VLANTAG               0xFFC2201C         /* EMAC1 VLAN Tag Register */
+#define EMAC1_VER                   0xFFC22020         /* EMAC1 EMAC Version Register */
+#define EMAC1_DBG                   0xFFC22024         /* EMAC1 EMAC Debug Register */
+#define EMAC1_RMTWKUP               0xFFC22028         /* EMAC1 Remote wake up frame register */
+#define EMAC1_PMT_CTLSTAT           0xFFC2202C         /* EMAC1 PMT Control and Status Register */
+#define EMAC1_ISTAT                 0xFFC22038         /* EMAC1 EMAC Interrupt Status Register */
+#define EMAC1_IMSK                  0xFFC2203C         /* EMAC1 EMAC Interrupt Mask Register */
+#define EMAC1_ADDR0_HI              0xFFC22040         /* EMAC1 EMAC Address0 High Register */
+#define EMAC1_ADDR0_LO              0xFFC22044         /* EMAC1 EMAC Address0 Low Register */
+#define EMAC1_MMC_CTL               0xFFC22100         /* EMAC1 MMC Control Register */
+#define EMAC1_MMC_RXINT             0xFFC22104         /* EMAC1 MMC RX Interrupt Register */
+#define EMAC1_MMC_TXINT             0xFFC22108         /* EMAC1 MMC TX Interrupt Register */
+#define EMAC1_MMC_RXIMSK            0xFFC2210C         /* EMAC1 MMC RX Interrupt Mask Register */
+#define EMAC1_MMC_TXIMSK            0xFFC22110         /* EMAC1 MMC TX Interrupt Mask Register */
+#define EMAC1_TXOCTCNT_GB           0xFFC22114         /* EMAC1 Num bytes transmitted exclusive of preamble */
+#define EMAC1_TXFRMCNT_GB           0xFFC22118         /* EMAC1 Num frames transmitted exclusive of retired */
+#define EMAC1_TXBCASTFRM_G          0xFFC2211C         /* EMAC1 Number of good broadcast frames transmitted. */
+#define EMAC1_TXMCASTFRM_G          0xFFC22120         /* EMAC1 Number of good multicast frames transmitted. */
+#define EMAC1_TX64_GB               0xFFC22124         /* EMAC1 Number of 64 byte length frames */
+#define EMAC1_TX65TO127_GB          0xFFC22128         /* EMAC1 Number of frames of length b/w 65-127 (inclusive) bytes */
+#define EMAC1_TX128TO255_GB         0xFFC2212C         /* EMAC1 Number of frames of length b/w 128-255 (inclusive) bytes */
+#define EMAC1_TX256TO511_GB         0xFFC22130         /* EMAC1 Number of frames of length b/w 256-511 (inclusive) bytes */
+#define EMAC1_TX512TO1023_GB        0xFFC22134         /* EMAC1 Number of frames of length b/w 512-1023 (inclusive) bytes */
+#define EMAC1_TX1024TOMAX_GB        0xFFC22138         /* EMAC1 Number of frames of length b/w 1024-max (inclusive) bytes */
+#define EMAC1_TXUCASTFRM_GB         0xFFC2213C         /* EMAC1 Number of good and bad unicast frames transmitted */
+#define EMAC1_TXMCASTFRM_GB         0xFFC22140         /* EMAC1 Number of good and bad multicast frames transmitted */
+#define EMAC1_TXBCASTFRM_GB         0xFFC22144         /* EMAC1 Number of good and bad broadcast frames transmitted */
+#define EMAC1_TXUNDR_ERR            0xFFC22148         /* EMAC1 Number of frames aborted due to frame underflow error */
+#define EMAC1_TXSNGCOL_G            0xFFC2214C         /* EMAC1 Number of transmitted frames after single collision */
+#define EMAC1_TXMULTCOL_G           0xFFC22150         /* EMAC1 Number of transmitted frames with more than one collision */
+#define EMAC1_TXDEFERRED            0xFFC22154         /* EMAC1 Number of transmitted frames after deferral */
+#define EMAC1_TXLATECOL             0xFFC22158         /* EMAC1 Number of frames aborted due to late collision error */
+#define EMAC1_TXEXCESSCOL           0xFFC2215C         /* EMAC1 Number of aborted frames due to excessive collisions */
+#define EMAC1_TXCARR_ERR            0xFFC22160         /* EMAC1 Number of aborted frames due to carrier sense error */
+#define EMAC1_TXOCTCNT_G            0xFFC22164         /* EMAC1 Number of bytes transmitted in good frames only */
+#define EMAC1_TXFRMCNT_G            0xFFC22168         /* EMAC1 Number of good frames transmitted. */
+#define EMAC1_TXEXCESSDEF           0xFFC2216C         /* EMAC1 Number of frames aborted due to excessive deferral */
+#define EMAC1_TXPAUSEFRM            0xFFC22170         /* EMAC1 Number of good PAUSE frames transmitted. */
+#define EMAC1_TXVLANFRM_G           0xFFC22174         /* EMAC1 Number of VLAN frames transmitted */
+#define EMAC1_RXFRMCNT_GB           0xFFC22180         /* EMAC1 Number of good and bad frames received. */
+#define EMAC1_RXOCTCNT_GB           0xFFC22184         /* EMAC1 Number of bytes received in good and bad frames */
+#define EMAC1_RXOCTCNT_G            0xFFC22188         /* EMAC1 Number of bytes received only in good frames */
+#define EMAC1_RXBCASTFRM_G          0xFFC2218C         /* EMAC1 Number of good broadcast frames received. */
+#define EMAC1_RXMCASTFRM_G          0xFFC22190         /* EMAC1 Number of good multicast frames received */
+#define EMAC1_RXCRC_ERR             0xFFC22194         /* EMAC1 Number of frames received with CRC error */
+#define EMAC1_RXALIGN_ERR           0xFFC22198         /* EMAC1 Number of frames with alignment error */
+#define EMAC1_RXRUNT_ERR            0xFFC2219C         /* EMAC1 Number of frames received with runt error. */
+#define EMAC1_RXJAB_ERR             0xFFC221A0         /* EMAC1 Number of frames received with length greater than 1518 */
+#define EMAC1_RXUSIZE_G             0xFFC221A4         /* EMAC1 Number of frames received with length 64 */
+#define EMAC1_RXOSIZE_G             0xFFC221A8         /* EMAC1 Number of frames received with length greater than maxium */
+#define EMAC1_RX64_GB               0xFFC221AC         /* EMAC1 Number of good and bad frames of lengh 64 bytes */
+#define EMAC1_RX65TO127_GB          0xFFC221B0         /* EMAC1 Number of good and bad frame between 64-127(inclusive) */
+#define EMAC1_RX128TO255_GB         0xFFC221B4         /* EMAC1 Number of good and bad frames received with length between 128 and 255 (inclusive) bytes, exclusive of preamble. */
+#define EMAC1_RX256TO511_GB         0xFFC221B8         /* EMAC1 Number of good and bad frames between 256-511(inclusive) */
+#define EMAC1_RX512TO1023_GB        0xFFC221BC         /* EMAC1 Number of good and bad frames received between 512-1023 */
+#define EMAC1_RX1024TOMAX_GB        0xFFC221C0         /* EMAC1 Number of frames received between 1024 and maxsize */
+#define EMAC1_RXUCASTFRM_G          0xFFC221C4         /* EMAC1 Number of good unicast frames received. */
+#define EMAC1_RXLEN_ERR             0xFFC221C8         /* EMAC1 Number of frames received with length error */
+#define EMAC1_RXOORTYPE             0xFFC221CC         /* EMAC1 Number of frames with length not equal to valid frame size */
+#define EMAC1_RXPAUSEFRM            0xFFC221D0         /* EMAC1 Number of good and valid PAUSE frames received. */
+#define EMAC1_RXFIFO_OVF            0xFFC221D4         /* EMAC1 Number of missed received frames due to FIFO overflow. This counter is not present in the GMAC-CORE configuration. */
+#define EMAC1_RXVLANFRM_GB          0xFFC221D8         /* EMAC1 Number of good and bad VLAN frames received. */
+#define EMAC1_RXWDOG_ERR            0xFFC221DC         /* EMAC1 Frames received with error due to watchdog timeout */
+#define EMAC1_IPC_RXIMSK            0xFFC22200         /* EMAC1 MMC IPC RX Interrupt Mask Register */
+#define EMAC1_IPC_RXINT             0xFFC22208         /* EMAC1 MMC IPC RX Interrupt Register */
+#define EMAC1_RXIPV4_GD_FRM         0xFFC22210         /* EMAC1 Number of good IPv4 datagrams */
+#define EMAC1_RXIPV4_HDR_ERR_FRM    0xFFC22214         /* EMAC1 Number of IPv4 datagrams with header errors */
+#define EMAC1_RXIPV4_NOPAY_FRM      0xFFC22218         /* EMAC1 Number of IPv4 datagrams without checksum */
+#define EMAC1_RXIPV4_FRAG_FRM       0xFFC2221C         /* EMAC1 Number of good IPv4 datagrams with fragmentation */
+#define EMAC1_RXIPV4_UDSBL_FRM      0xFFC22220         /* EMAC1 Number of IPv4 UDP datagrams with disabled checksum */
+#define EMAC1_RXIPV6_GD_FRM         0xFFC22224         /* EMAC1 Number of IPv4 datagrams with TCP/UDP/ICMP payloads */
+#define EMAC1_RXIPV6_HDR_ERR_FRM    0xFFC22228         /* EMAC1 Number of IPv6 datagrams with header errors */
+#define EMAC1_RXIPV6_NOPAY_FRM      0xFFC2222C         /* EMAC1 Number of IPv6 datagrams with no TCP/UDP/ICMP payload */
+#define EMAC1_RXUDP_GD_FRM          0xFFC22230         /* EMAC1 Number of good IP datagrames with good UDP payload */
+#define EMAC1_RXUDP_ERR_FRM         0xFFC22234         /* EMAC1 Number of good IP datagrams with UDP checksum errors */
+#define EMAC1_RXTCP_GD_FRM          0xFFC22238         /* EMAC1 Number of good IP datagrams with a good TCP payload */
+#define EMAC1_RXTCP_ERR_FRM         0xFFC2223C         /* EMAC1 Number of good IP datagrams with TCP checksum errors */
+#define EMAC1_RXICMP_GD_FRM         0xFFC22240         /* EMAC1 Number of good IP datagrams with a good ICMP payload */
+#define EMAC1_RXICMP_ERR_FRM        0xFFC22244         /* EMAC1 Number of good IP datagrams with ICMP checksum errors */
+#define EMAC1_RXIPV4_GD_OCT         0xFFC22250         /* EMAC1 Bytes received in IPv4 datagrams including tcp,udp or icmp */
+#define EMAC1_RXIPV4_HDR_ERR_OCT    0xFFC22254         /* EMAC1 Bytes received in IPv4 datagrams with header errors */
+#define EMAC1_RXIPV4_NOPAY_OCT      0xFFC22258         /* EMAC1 Bytes received in IPv4 datagrams without tcp,udp,icmp load */
+#define EMAC1_RXIPV4_FRAG_OCT       0xFFC2225C         /* EMAC1 Bytes received in fragmented IPv4 datagrams */
+#define EMAC1_RXIPV4_UDSBL_OCT      0xFFC22260         /* EMAC1 Bytes received in UDP segment with checksum disabled */
+#define EMAC1_RXIPV6_GD_OCT         0xFFC22264         /* EMAC1 Bytes received in good IPv6  including tcp,udp or icmp load */
+#define EMAC1_RXIPV6_HDR_ERR_OCT    0xFFC22268         /* EMAC1 Number of bytes received in IPv6 with header errors */
+#define EMAC1_RXIPV6_NOPAY_OCT      0xFFC2226C         /* EMAC1 Bytes received in IPv6 without tcp,udp or icmp load */
+#define EMAC1_RXUDP_GD_OCT          0xFFC22270         /* EMAC1 Number of bytes received in good UDP segments */
+#define EMAC1_RXUDP_ERR_OCT         0xFFC22274         /* EMAC1 Number of bytes received in UDP segment with checksum err */
+#define EMAC1_RXTCP_GD_OCT          0xFFC22278         /* EMAC1 Number of bytes received in a good TCP segment */
+#define EMAC1_RXTCP_ERR_OCT         0xFFC2227C         /* EMAC1 Number of bytes received in TCP segment with checksum err */
+#define EMAC1_RXICMP_GD_OCT         0xFFC22280         /* EMAC1 Number of bytes received in a good ICMP segment */
+#define EMAC1_RXICMP_ERR_OCT        0xFFC22284         /* EMAC1 Bytes received in an ICMP segment with checksum errors */
+#define EMAC1_TM_CTL                0xFFC22700         /* EMAC1 EMAC Time Stamp Control Register */
+#define EMAC1_TM_SUBSEC             0xFFC22704         /* EMAC1 EMAC Time Stamp Sub Second Increment */
+#define EMAC1_TM_SEC                0xFFC22708         /* EMAC1 EMAC Time Stamp Second Register */
+#define EMAC1_TM_NSEC               0xFFC2270C         /* EMAC1 EMAC Time Stamp Nano Second Register */
+#define EMAC1_TM_SECUPDT            0xFFC22710         /* EMAC1 EMAC Time Stamp Seconds Update */
+#define EMAC1_TM_NSECUPDT           0xFFC22714         /* EMAC1 EMAC Time Stamp Nano Seconds Update */
+#define EMAC1_TM_ADDEND             0xFFC22718         /* EMAC1 EMAC Time Stamp Addend Register */
+#define EMAC1_TM_TGTM               0xFFC2271C         /* EMAC1 EMAC Time Stamp Target Time Sec. */
+#define EMAC1_TM_NTGTM              0xFFC22720         /* EMAC1 EMAC Time Stamp Target Time Nanosec. */
+#define EMAC1_TM_HISEC              0xFFC22724         /* EMAC1 EMAC Time Stamp High Second Register */
+#define EMAC1_TM_STMPSTAT           0xFFC22728         /* EMAC1 EMAC Time Stamp Status Register */
+#define EMAC1_TM_PPSCTL             0xFFC2272C         /* EMAC1 EMAC PPS Control Register */
+#define EMAC1_TM_AUXSTMP_NSEC       0xFFC22730         /* EMAC1 EMAC Auxillary Time Stamp Nano Register */
+#define EMAC1_TM_AUXSTMP_SEC        0xFFC22734         /* EMAC1 EMAC Auxillary Time Stamp Sec Register */
+#define EMAC1_DMA_BUSMODE           0xFFC23000         /* EMAC1 Bus Operating Modes for EMAC DMA */
+#define EMAC1_DMA_TXPOLL            0xFFC23004         /* EMAC1 TX DMA Poll demand register */
+#define EMAC1_DMA_RXPOLL            0xFFC23008         /* EMAC1 RX DMA Poll demand register */
+#define EMAC1_DMA_RXDSC_ADDR        0xFFC2300C         /* EMAC1 RX Descriptor List Address */
+#define EMAC1_DMA_TXDSC_ADDR        0xFFC23010         /* EMAC1 TX Descriptor List Address */
+#define EMAC1_DMA_STAT              0xFFC23014         /* EMAC1 DMA Status Register */
+#define EMAC1_DMA_OPMODE            0xFFC23018         /* EMAC1 DMA Operation Mode Register */
+#define EMAC1_DMA_IEN               0xFFC2301C         /* EMAC1 DMA Interrupt Enable Register */
+#define EMAC1_DMA_MISS_FRM          0xFFC23020         /* EMAC1 DMA missed frame and buffer overflow counter */
+#define EMAC1_DMA_RXIWDOG           0xFFC23024         /* EMAC1 DMA RX Interrupt Watch Dog timer */
+#define EMAC1_DMA_BMMODE            0xFFC23028         /* EMAC1 AXI Bus Mode Register */
+#define EMAC1_DMA_BMSTAT            0xFFC2302C         /* EMAC1 AXI Status Register */
+#define EMAC1_DMA_TXDSC_CUR         0xFFC23048         /* EMAC1 TX current descriptor register */
+#define EMAC1_DMA_RXDSC_CUR         0xFFC2304C         /* EMAC1 RX current descriptor register */
+#define EMAC1_DMA_TXBUF_CUR         0xFFC23050         /* EMAC1 TX current buffer pointer register */
+#define EMAC1_DMA_RXBUF_CUR         0xFFC23054         /* EMAC1 RX current buffer pointer register */
+#define EMAC1_HWFEAT                0xFFC23058         /* EMAC1 Hardware Feature Register */
+
+
+/* =========================
+        SPI Registers
+   ========================= */
+
+/* =========================
+        SPI0
+   ========================= */
+#define SPI0_REGBASE                0xFFC40400
+#define SPI0_CTL                    0xFFC40404         /* SPI0 Control Register */
+#define SPI0_RXCTL                  0xFFC40408         /* SPI0 RX Control Register */
+#define SPI0_TXCTL                  0xFFC4040C         /* SPI0 TX Control Register */
+#define SPI0_CLK                    0xFFC40410         /* SPI0 Clock Rate Register */
+#define SPI0_DLY                    0xFFC40414         /* SPI0 Delay Register */
+#define SPI0_SLVSEL                 0xFFC40418         /* SPI0 Slave Select Register */
+#define SPI0_RWC                    0xFFC4041C         /* SPI0 Received Word-Count Register */
+#define SPI0_RWCR                   0xFFC40420         /* SPI0 Received Word-Count Reload Register */
+#define SPI0_TWC                    0xFFC40424         /* SPI0 Transmitted Word-Count Register */
+#define SPI0_TWCR                   0xFFC40428         /* SPI0 Transmitted Word-Count Reload Register */
+#define SPI0_IMSK                   0xFFC40430         /* SPI0 Interrupt Mask Register */
+#define SPI0_IMSK_CLR               0xFFC40434         /* SPI0 Interrupt Mask Clear Register */
+#define SPI0_IMSK_SET               0xFFC40438         /* SPI0 Interrupt Mask Set Register */
+#define SPI0_STAT                   0xFFC40440         /* SPI0 Status Register */
+#define SPI0_ILAT                   0xFFC40444         /* SPI0 Masked Interrupt Condition Register */
+#define SPI0_ILAT_CLR               0xFFC40448         /* SPI0 Masked Interrupt Clear Register */
+#define SPI0_RFIFO                  0xFFC40450         /* SPI0 Receive FIFO Data Register */
+#define SPI0_TFIFO                  0xFFC40458         /* SPI0 Transmit FIFO Data Register */
+
+/* =========================
+        SPI1
+   ========================= */
+#define SPI1_REGBASE                0xFFC40500
+#define SPI1_CTL                    0xFFC40504         /* SPI1 Control Register */
+#define SPI1_RXCTL                  0xFFC40508         /* SPI1 RX Control Register */
+#define SPI1_TXCTL                  0xFFC4050C         /* SPI1 TX Control Register */
+#define SPI1_CLK                    0xFFC40510         /* SPI1 Clock Rate Register */
+#define SPI1_DLY                    0xFFC40514         /* SPI1 Delay Register */
+#define SPI1_SLVSEL                 0xFFC40518         /* SPI1 Slave Select Register */
+#define SPI1_RWC                    0xFFC4051C         /* SPI1 Received Word-Count Register */
+#define SPI1_RWCR                   0xFFC40520         /* SPI1 Received Word-Count Reload Register */
+#define SPI1_TWC                    0xFFC40524         /* SPI1 Transmitted Word-Count Register */
+#define SPI1_TWCR                   0xFFC40528         /* SPI1 Transmitted Word-Count Reload Register */
+#define SPI1_IMSK                   0xFFC40530         /* SPI1 Interrupt Mask Register */
+#define SPI1_IMSK_CLR               0xFFC40534         /* SPI1 Interrupt Mask Clear Register */
+#define SPI1_IMSK_SET               0xFFC40538         /* SPI1 Interrupt Mask Set Register */
+#define SPI1_STAT                   0xFFC40540         /* SPI1 Status Register */
+#define SPI1_ILAT                   0xFFC40544         /* SPI1 Masked Interrupt Condition Register */
+#define SPI1_ILAT_CLR               0xFFC40548         /* SPI1 Masked Interrupt Clear Register */
+#define SPI1_RFIFO                  0xFFC40550         /* SPI1 Receive FIFO Data Register */
+#define SPI1_TFIFO                  0xFFC40558         /* SPI1 Transmit FIFO Data Register */
+
+/* =========================
+	SPORT Registers
+   ========================= */
+
+/* =========================
+	SPORT0
+   ========================= */
+#define SPORT0_CTL_A                0xFFC40000         /* SPORT0 'A' Control Register */
+#define SPORT0_DIV_A                0xFFC40004         /* SPORT0 'A' Clock and FS Divide Register */
+#define SPORT0_MCTL_A               0xFFC40008         /* SPORT0 'A' Multichannel Control Register */
+#define SPORT0_CS0_A                0xFFC4000C         /* SPORT0 'A' Multichannel Select Register (Channels 0-31) */
+#define SPORT0_CS1_A                0xFFC40010         /* SPORT0 'A' Multichannel Select Register (Channels 32-63) */
+#define SPORT0_CS2_A                0xFFC40014         /* SPORT0 'A' Multichannel Select Register (Channels 64-95) */
+#define SPORT0_CS3_A                0xFFC40018         /* SPORT0 'A' Multichannel Select Register (Channels 96-127) */
+#define SPORT0_CNT_A                0xFFC4001C         /* SPORT0 'A' Frame Sync And Clock Divisor Current Count */
+#define SPORT0_ERR_A                0xFFC40020         /* SPORT0 'A' Error Register */
+#define SPORT0_MSTAT_A              0xFFC40024         /* SPORT0 'A' Multichannel Mode Status Register */
+#define SPORT0_CTL2_A               0xFFC40028         /* SPORT0 'A' Control Register 2 */
+#define SPORT0_TXPRI_A              0xFFC40040         /* SPORT0 'A' Primary Channel Transmit Buffer Register */
+#define SPORT0_RXPRI_A              0xFFC40044         /* SPORT0 'A' Primary Channel Receive Buffer Register */
+#define SPORT0_TXSEC_A              0xFFC40048         /* SPORT0 'A' Secondary Channel Transmit Buffer Register */
+#define SPORT0_RXSEC_A              0xFFC4004C         /* SPORT0 'A' Secondary Channel Receive Buffer Register */
+#define SPORT0_CTL_B                0xFFC40080         /* SPORT0 'B' Control Register */
+#define SPORT0_DIV_B                0xFFC40084         /* SPORT0 'B' Clock and FS Divide Register */
+#define SPORT0_MCTL_B               0xFFC40088         /* SPORT0 'B' Multichannel Control Register */
+#define SPORT0_CS0_B                0xFFC4008C         /* SPORT0 'B' Multichannel Select Register (Channels 0-31) */
+#define SPORT0_CS1_B                0xFFC40090         /* SPORT0 'B' Multichannel Select Register (Channels 32-63) */
+#define SPORT0_CS2_B                0xFFC40094         /* SPORT0 'B' Multichannel Select Register (Channels 64-95) */
+#define SPORT0_CS3_B                0xFFC40098         /* SPORT0 'B' Multichannel Select Register (Channels 96-127) */
+#define SPORT0_CNT_B                0xFFC4009C         /* SPORT0 'B' Frame Sync And Clock Divisor Current Count */
+#define SPORT0_ERR_B                0xFFC400A0         /* SPORT0 'B' Error Register */
+#define SPORT0_MSTAT_B              0xFFC400A4         /* SPORT0 'B' Multichannel Mode Status Register */
+#define SPORT0_CTL2_B               0xFFC400A8         /* SPORT0 'B' Control Register 2 */
+#define SPORT0_TXPRI_B              0xFFC400C0         /* SPORT0 'B' Primary Channel Transmit Buffer Register */
+#define SPORT0_RXPRI_B              0xFFC400C4         /* SPORT0 'B' Primary Channel Receive Buffer Register */
+#define SPORT0_TXSEC_B              0xFFC400C8         /* SPORT0 'B' Secondary Channel Transmit Buffer Register */
+#define SPORT0_RXSEC_B              0xFFC400CC         /* SPORT0 'B' Secondary Channel Receive Buffer Register */
+
+/* =========================
+	SPORT1
+   ========================= */
+#define SPORT1_CTL_A                0xFFC40100         /* SPORT1 'A' Control Register */
+#define SPORT1_DIV_A                0xFFC40104         /* SPORT1 'A' Clock and FS Divide Register */
+#define SPORT1_MCTL_A               0xFFC40108         /* SPORT1 'A' Multichannel Control Register */
+#define SPORT1_CS0_A                0xFFC4010C         /* SPORT1 'A' Multichannel Select Register (Channels 0-31) */
+#define SPORT1_CS1_A                0xFFC40110         /* SPORT1 'A' Multichannel Select Register (Channels 32-63) */
+#define SPORT1_CS2_A                0xFFC40114         /* SPORT1 'A' Multichannel Select Register (Channels 64-95) */
+#define SPORT1_CS3_A                0xFFC40118         /* SPORT1 'A' Multichannel Select Register (Channels 96-127) */
+#define SPORT1_CNT_A                0xFFC4011C         /* SPORT1 'A' Frame Sync And Clock Divisor Current Count */
+#define SPORT1_ERR_A                0xFFC40120         /* SPORT1 'A' Error Register */
+#define SPORT1_MSTAT_A              0xFFC40124         /* SPORT1 'A' Multichannel Mode Status Register */
+#define SPORT1_CTL2_A               0xFFC40128         /* SPORT1 'A' Control Register 2 */
+#define SPORT1_TXPRI_A              0xFFC40140         /* SPORT1 'A' Primary Channel Transmit Buffer Register */
+#define SPORT1_RXPRI_A              0xFFC40144         /* SPORT1 'A' Primary Channel Receive Buffer Register */
+#define SPORT1_TXSEC_A              0xFFC40148         /* SPORT1 'A' Secondary Channel Transmit Buffer Register */
+#define SPORT1_RXSEC_A              0xFFC4014C         /* SPORT1 'A' Secondary Channel Receive Buffer Register */
+#define SPORT1_CTL_B                0xFFC40180         /* SPORT1 'B' Control Register */
+#define SPORT1_DIV_B                0xFFC40184         /* SPORT1 'B' Clock and FS Divide Register */
+#define SPORT1_MCTL_B               0xFFC40188         /* SPORT1 'B' Multichannel Control Register */
+#define SPORT1_CS0_B                0xFFC4018C         /* SPORT1 'B' Multichannel Select Register (Channels 0-31) */
+#define SPORT1_CS1_B                0xFFC40190         /* SPORT1 'B' Multichannel Select Register (Channels 32-63) */
+#define SPORT1_CS2_B                0xFFC40194         /* SPORT1 'B' Multichannel Select Register (Channels 64-95) */
+#define SPORT1_CS3_B                0xFFC40198         /* SPORT1 'B' Multichannel Select Register (Channels 96-127) */
+#define SPORT1_CNT_B                0xFFC4019C         /* SPORT1 'B' Frame Sync And Clock Divisor Current Count */
+#define SPORT1_ERR_B                0xFFC401A0         /* SPORT1 'B' Error Register */
+#define SPORT1_MSTAT_B              0xFFC401A4         /* SPORT1 'B' Multichannel Mode Status Register */
+#define SPORT1_CTL2_B               0xFFC401A8         /* SPORT1 'B' Control Register 2 */
+#define SPORT1_TXPRI_B              0xFFC401C0         /* SPORT1 'B' Primary Channel Transmit Buffer Register */
+#define SPORT1_RXPRI_B              0xFFC401C4         /* SPORT1 'B' Primary Channel Receive Buffer Register */
+#define SPORT1_TXSEC_B              0xFFC401C8         /* SPORT1 'B' Secondary Channel Transmit Buffer Register */
+#define SPORT1_RXSEC_B              0xFFC401CC         /* SPORT1 'B' Secondary Channel Receive Buffer Register */
+
+/* =========================
+	SPORT2
+   ========================= */
+#define SPORT2_CTL_A                0xFFC40200         /* SPORT2 'A' Control Register */
+#define SPORT2_DIV_A                0xFFC40204         /* SPORT2 'A' Clock and FS Divide Register */
+#define SPORT2_MCTL_A               0xFFC40208         /* SPORT2 'A' Multichannel Control Register */
+#define SPORT2_CS0_A                0xFFC4020C         /* SPORT2 'A' Multichannel Select Register (Channels 0-31) */
+#define SPORT2_CS1_A                0xFFC40210         /* SPORT2 'A' Multichannel Select Register (Channels 32-63) */
+#define SPORT2_CS2_A                0xFFC40214         /* SPORT2 'A' Multichannel Select Register (Channels 64-95) */
+#define SPORT2_CS3_A                0xFFC40218         /* SPORT2 'A' Multichannel Select Register (Channels 96-127) */
+#define SPORT2_CNT_A                0xFFC4021C         /* SPORT2 'A' Frame Sync And Clock Divisor Current Count */
+#define SPORT2_ERR_A                0xFFC40220         /* SPORT2 'A' Error Register */
+#define SPORT2_MSTAT_A              0xFFC40224         /* SPORT2 'A' Multichannel Mode Status Register */
+#define SPORT2_CTL2_A               0xFFC40228         /* SPORT2 'A' Control Register 2 */
+#define SPORT2_TXPRI_A              0xFFC40240         /* SPORT2 'A' Primary Channel Transmit Buffer Register */
+#define SPORT2_RXPRI_A              0xFFC40244         /* SPORT2 'A' Primary Channel Receive Buffer Register */
+#define SPORT2_TXSEC_A              0xFFC40248         /* SPORT2 'A' Secondary Channel Transmit Buffer Register */
+#define SPORT2_RXSEC_A              0xFFC4024C         /* SPORT2 'A' Secondary Channel Receive Buffer Register */
+#define SPORT2_CTL_B                0xFFC40280         /* SPORT2 'B' Control Register */
+#define SPORT2_DIV_B                0xFFC40284         /* SPORT2 'B' Clock and FS Divide Register */
+#define SPORT2_MCTL_B               0xFFC40288         /* SPORT2 'B' Multichannel Control Register */
+#define SPORT2_CS0_B                0xFFC4028C         /* SPORT2 'B' Multichannel Select Register (Channels 0-31) */
+#define SPORT2_CS1_B                0xFFC40290         /* SPORT2 'B' Multichannel Select Register (Channels 32-63) */
+#define SPORT2_CS2_B                0xFFC40294         /* SPORT2 'B' Multichannel Select Register (Channels 64-95) */
+#define SPORT2_CS3_B                0xFFC40298         /* SPORT2 'B' Multichannel Select Register (Channels 96-127) */
+#define SPORT2_CNT_B                0xFFC4029C         /* SPORT2 'B' Frame Sync And Clock Divisor Current Count */
+#define SPORT2_ERR_B                0xFFC402A0         /* SPORT2 'B' Error Register */
+#define SPORT2_MSTAT_B              0xFFC402A4         /* SPORT2 'B' Multichannel Mode Status Register */
+#define SPORT2_CTL2_B               0xFFC402A8         /* SPORT2 'B' Control Register 2 */
+#define SPORT2_TXPRI_B              0xFFC402C0         /* SPORT2 'B' Primary Channel Transmit Buffer Register */
+#define SPORT2_RXPRI_B              0xFFC402C4         /* SPORT2 'B' Primary Channel Receive Buffer Register */
+#define SPORT2_TXSEC_B              0xFFC402C8         /* SPORT2 'B' Secondary Channel Transmit Buffer Register */
+#define SPORT2_RXSEC_B              0xFFC402CC         /* SPORT2 'B' Secondary Channel Receive Buffer Register */
+
+/* =========================
+	EPPI Registers
+   ========================= */
+
+/* =========================
+	EPPI0
+   ========================= */
+#define EPPI0_STAT                  0xFFC18000         /* EPPI0 Status Register */
+#define EPPI0_HCNT                  0xFFC18004         /* EPPI0 Horizontal Transfer Count Register */
+#define EPPI0_HDLY                  0xFFC18008         /* EPPI0 Horizontal Delay Count Register */
+#define EPPI0_VCNT                  0xFFC1800C         /* EPPI0 Vertical Transfer Count Register */
+#define EPPI0_VDLY                  0xFFC18010         /* EPPI0 Vertical Delay Count Register */
+#define EPPI0_FRAME                 0xFFC18014         /* EPPI0 Lines Per Frame Register */
+#define EPPI0_LINE                  0xFFC18018         /* EPPI0 Samples Per Line Register */
+#define EPPI0_CLKDIV                0xFFC1801C         /* EPPI0 Clock Divide Register */
+#define EPPI0_CTL                   0xFFC18020         /* EPPI0 Control Register */
+#define EPPI0_FS1_WLHB              0xFFC18024         /* EPPI0 FS1 Width Register / EPPI Horizontal Blanking Samples Per Line Register */
+#define EPPI0_FS1_PASPL             0xFFC18028         /* EPPI0 FS1 Period Register / EPPI Active Samples Per Line Register */
+#define EPPI0_FS2_WLVB              0xFFC1802C         /* EPPI0 FS2 Width Register / EPPI Lines Of Vertical Blanking Register */
+#define EPPI0_FS2_PALPF             0xFFC18030         /* EPPI0 FS2 Period Register / EPPI Active Lines Per Field Register */
+#define EPPI0_IMSK                  0xFFC18034         /* EPPI0 Interrupt Mask Register */
+#define EPPI0_ODDCLIP               0xFFC1803C         /* EPPI0 Clipping Register for ODD (Chroma) Data */
+#define EPPI0_EVENCLIP              0xFFC18040         /* EPPI0 Clipping Register for EVEN (Luma) Data */
+#define EPPI0_FS1_DLY               0xFFC18044         /* EPPI0 Frame Sync 1 Delay Value */
+#define EPPI0_FS2_DLY               0xFFC18048         /* EPPI0 Frame Sync 2 Delay Value */
+#define EPPI0_CTL2                  0xFFC1804C         /* EPPI0 Control Register 2 */
+
+/* =========================
+	EPPI1
+   ========================= */
+#define EPPI1_STAT                  0xFFC18400         /* EPPI1 Status Register */
+#define EPPI1_HCNT                  0xFFC18404         /* EPPI1 Horizontal Transfer Count Register */
+#define EPPI1_HDLY                  0xFFC18408         /* EPPI1 Horizontal Delay Count Register */
+#define EPPI1_VCNT                  0xFFC1840C         /* EPPI1 Vertical Transfer Count Register */
+#define EPPI1_VDLY                  0xFFC18410         /* EPPI1 Vertical Delay Count Register */
+#define EPPI1_FRAME                 0xFFC18414         /* EPPI1 Lines Per Frame Register */
+#define EPPI1_LINE                  0xFFC18418         /* EPPI1 Samples Per Line Register */
+#define EPPI1_CLKDIV                0xFFC1841C         /* EPPI1 Clock Divide Register */
+#define EPPI1_CTL                   0xFFC18420         /* EPPI1 Control Register */
+#define EPPI1_FS1_WLHB              0xFFC18424         /* EPPI1 FS1 Width Register / EPPI Horizontal Blanking Samples Per Line Register */
+#define EPPI1_FS1_PASPL             0xFFC18428         /* EPPI1 FS1 Period Register / EPPI Active Samples Per Line Register */
+#define EPPI1_FS2_WLVB              0xFFC1842C         /* EPPI1 FS2 Width Register / EPPI Lines Of Vertical Blanking Register */
+#define EPPI1_FS2_PALPF             0xFFC18430         /* EPPI1 FS2 Period Register / EPPI Active Lines Per Field Register */
+#define EPPI1_IMSK                  0xFFC18434         /* EPPI1 Interrupt Mask Register */
+#define EPPI1_ODDCLIP               0xFFC1843C         /* EPPI1 Clipping Register for ODD (Chroma) Data */
+#define EPPI1_EVENCLIP              0xFFC18440         /* EPPI1 Clipping Register for EVEN (Luma) Data */
+#define EPPI1_FS1_DLY               0xFFC18444         /* EPPI1 Frame Sync 1 Delay Value */
+#define EPPI1_FS2_DLY               0xFFC18448         /* EPPI1 Frame Sync 2 Delay Value */
+#define EPPI1_CTL2                  0xFFC1844C         /* EPPI1 Control Register 2 */
+
+/* =========================
+	EPPI2
+   ========================= */
+#define EPPI2_STAT                  0xFFC18800         /* EPPI2 Status Register */
+#define EPPI2_HCNT                  0xFFC18804         /* EPPI2 Horizontal Transfer Count Register */
+#define EPPI2_HDLY                  0xFFC18808         /* EPPI2 Horizontal Delay Count Register */
+#define EPPI2_VCNT                  0xFFC1880C         /* EPPI2 Vertical Transfer Count Register */
+#define EPPI2_VDLY                  0xFFC18810         /* EPPI2 Vertical Delay Count Register */
+#define EPPI2_FRAME                 0xFFC18814         /* EPPI2 Lines Per Frame Register */
+#define EPPI2_LINE                  0xFFC18818         /* EPPI2 Samples Per Line Register */
+#define EPPI2_CLKDIV                0xFFC1881C         /* EPPI2 Clock Divide Register */
+#define EPPI2_CTL                   0xFFC18820         /* EPPI2 Control Register */
+#define EPPI2_FS1_WLHB              0xFFC18824         /* EPPI2 FS1 Width Register / EPPI Horizontal Blanking Samples Per Line Register */
+#define EPPI2_FS1_PASPL             0xFFC18828         /* EPPI2 FS1 Period Register / EPPI Active Samples Per Line Register */
+#define EPPI2_FS2_WLVB              0xFFC1882C         /* EPPI2 FS2 Width Register / EPPI Lines Of Vertical Blanking Register */
+#define EPPI2_FS2_PALPF             0xFFC18830         /* EPPI2 FS2 Period Register / EPPI Active Lines Per Field Register */
+#define EPPI2_IMSK                  0xFFC18834         /* EPPI2 Interrupt Mask Register */
+#define EPPI2_ODDCLIP               0xFFC1883C         /* EPPI2 Clipping Register for ODD (Chroma) Data */
+#define EPPI2_EVENCLIP              0xFFC18840         /* EPPI2 Clipping Register for EVEN (Luma) Data */
+#define EPPI2_FS1_DLY               0xFFC18844         /* EPPI2 Frame Sync 1 Delay Value */
+#define EPPI2_FS2_DLY               0xFFC18848         /* EPPI2 Frame Sync 2 Delay Value */
+#define EPPI2_CTL2                  0xFFC1884C         /* EPPI2 Control Register 2 */
+
+
+
+/* =========================
+        DDE Registers
+   ========================= */
+
+/* =========================
+        DMA0
+   ========================= */
+#define DMA0_NEXT_DESC_PTR          0xFFC41000         /* DMA0 Pointer to Next Initial Descriptor */
+#define DMA0_START_ADDR             0xFFC41004         /* DMA0 Start Address of Current Buffer */
+#define DMA0_CONFIG                 0xFFC41008         /* DMA0 Configuration Register */
+#define DMA0_X_COUNT                0xFFC4100C         /* DMA0 Inner Loop Count Start Value */
+#define DMA0_X_MODIFY               0xFFC41010         /* DMA0 Inner Loop Address Increment */
+#define DMA0_Y_COUNT                0xFFC41014         /* DMA0 Outer Loop Count Start Value (2D only) */
+#define DMA0_Y_MODIFY               0xFFC41018         /* DMA0 Outer Loop Address Increment (2D only) */
+#define DMA0_CURR_DESC_PTR          0xFFC41024         /* DMA0 Current Descriptor Pointer */
+#define DMA0_PREV_DESC_PTR          0xFFC41028         /* DMA0 Previous Initial Descriptor Pointer */
+#define DMA0_CURR_ADDR              0xFFC4102C         /* DMA0 Current Address */
+#define DMA0_IRQ_STATUS             0xFFC41030         /* DMA0 Status Register */
+#define DMA0_CURR_X_COUNT           0xFFC41034         /* DMA0 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA0_CURR_Y_COUNT           0xFFC41038         /* DMA0 Current Row Count (2D only) */
+#define DMA0_BWL_COUNT              0xFFC41040         /* DMA0 Bandwidth Limit Count */
+#define DMA0_CURR_BWL_COUNT         0xFFC41044         /* DMA0 Bandwidth Limit Count Current */
+#define DMA0_BWM_COUNT              0xFFC41048         /* DMA0 Bandwidth Monitor Count */
+#define DMA0_CURR_BWM_COUNT         0xFFC4104C         /* DMA0 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA1
+   ========================= */
+#define DMA1_NEXT_DESC_PTR             0xFFC41080         /* DMA1 Pointer to Next Initial Descriptor */
+#define DMA1_START_ADDR              0xFFC41084         /* DMA1 Start Address of Current Buffer */
+#define DMA1_CONFIG                    0xFFC41088         /* DMA1 Configuration Register */
+#define DMA1_X_COUNT                   0xFFC4108C         /* DMA1 Inner Loop Count Start Value */
+#define DMA1_X_MODIFY                   0xFFC41090         /* DMA1 Inner Loop Address Increment */
+#define DMA1_Y_COUNT                   0xFFC41094         /* DMA1 Outer Loop Count Start Value (2D only) */
+#define DMA1_Y_MODIFY                   0xFFC41098         /* DMA1 Outer Loop Address Increment (2D only) */
+#define DMA1_CURR_DESC_PTR             0xFFC410A4         /* DMA1 Current Descriptor Pointer */
+#define DMA1_PREV_DESC_PTR             0xFFC410A8         /* DMA1 Previous Initial Descriptor Pointer */
+#define DMA1_CURR_ADDR               0xFFC410AC         /* DMA1 Current Address */
+#define DMA1_IRQ_STATUS                   0xFFC410B0         /* DMA1 Status Register */
+#define DMA1_CURR_X_COUNT               0xFFC410B4         /* DMA1 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA1_CURR_Y_COUNT               0xFFC410B8         /* DMA1 Current Row Count (2D only) */
+#define DMA1_BWL_COUNT                 0xFFC410C0         /* DMA1 Bandwidth Limit Count */
+#define DMA1_CURR_BWL_COUNT             0xFFC410C4         /* DMA1 Bandwidth Limit Count Current */
+#define DMA1_BWM_COUNT                 0xFFC410C8         /* DMA1 Bandwidth Monitor Count */
+#define DMA1_CURR_BWM_COUNT             0xFFC410CC         /* DMA1 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA2
+   ========================= */
+#define DMA2_NEXT_DESC_PTR             0xFFC41100         /* DMA2 Pointer to Next Initial Descriptor */
+#define DMA2_START_ADDR              0xFFC41104         /* DMA2 Start Address of Current Buffer */
+#define DMA2_CONFIG                    0xFFC41108         /* DMA2 Configuration Register */
+#define DMA2_X_COUNT                   0xFFC4110C         /* DMA2 Inner Loop Count Start Value */
+#define DMA2_X_MODIFY                   0xFFC41110         /* DMA2 Inner Loop Address Increment */
+#define DMA2_Y_COUNT                   0xFFC41114         /* DMA2 Outer Loop Count Start Value (2D only) */
+#define DMA2_Y_MODIFY                   0xFFC41118         /* DMA2 Outer Loop Address Increment (2D only) */
+#define DMA2_CURR_DESC_PTR             0xFFC41124         /* DMA2 Current Descriptor Pointer */
+#define DMA2_PREV_DESC_PTR             0xFFC41128         /* DMA2 Previous Initial Descriptor Pointer */
+#define DMA2_CURR_ADDR               0xFFC4112C         /* DMA2 Current Address */
+#define DMA2_IRQ_STATUS                   0xFFC41130         /* DMA2 Status Register */
+#define DMA2_CURR_X_COUNT               0xFFC41134         /* DMA2 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA2_CURR_Y_COUNT               0xFFC41138         /* DMA2 Current Row Count (2D only) */
+#define DMA2_BWL_COUNT                 0xFFC41140         /* DMA2 Bandwidth Limit Count */
+#define DMA2_CURR_BWL_COUNT             0xFFC41144         /* DMA2 Bandwidth Limit Count Current */
+#define DMA2_BWM_COUNT                 0xFFC41148         /* DMA2 Bandwidth Monitor Count */
+#define DMA2_CURR_BWM_COUNT             0xFFC4114C         /* DMA2 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA3
+   ========================= */
+#define DMA3_NEXT_DESC_PTR             0xFFC41180         /* DMA3 Pointer to Next Initial Descriptor */
+#define DMA3_START_ADDR              0xFFC41184         /* DMA3 Start Address of Current Buffer */
+#define DMA3_CONFIG                    0xFFC41188         /* DMA3 Configuration Register */
+#define DMA3_X_COUNT                   0xFFC4118C         /* DMA3 Inner Loop Count Start Value */
+#define DMA3_X_MODIFY                   0xFFC41190         /* DMA3 Inner Loop Address Increment */
+#define DMA3_Y_COUNT                   0xFFC41194         /* DMA3 Outer Loop Count Start Value (2D only) */
+#define DMA3_Y_MODIFY                   0xFFC41198         /* DMA3 Outer Loop Address Increment (2D only) */
+#define DMA3_CURR_DESC_PTR             0xFFC411A4         /* DMA3 Current Descriptor Pointer */
+#define DMA3_PREV_DESC_PTR             0xFFC411A8         /* DMA3 Previous Initial Descriptor Pointer */
+#define DMA3_CURR_ADDR               0xFFC411AC         /* DMA3 Current Address */
+#define DMA3_IRQ_STATUS                   0xFFC411B0         /* DMA3 Status Register */
+#define DMA3_CURR_X_COUNT               0xFFC411B4         /* DMA3 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA3_CURR_Y_COUNT               0xFFC411B8         /* DMA3 Current Row Count (2D only) */
+#define DMA3_BWL_COUNT                 0xFFC411C0         /* DMA3 Bandwidth Limit Count */
+#define DMA3_CURR_BWL_COUNT             0xFFC411C4         /* DMA3 Bandwidth Limit Count Current */
+#define DMA3_BWM_COUNT                 0xFFC411C8         /* DMA3 Bandwidth Monitor Count */
+#define DMA3_CURR_BWM_COUNT             0xFFC411CC         /* DMA3 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA4
+   ========================= */
+#define DMA4_NEXT_DESC_PTR             0xFFC41200         /* DMA4 Pointer to Next Initial Descriptor */
+#define DMA4_START_ADDR              0xFFC41204         /* DMA4 Start Address of Current Buffer */
+#define DMA4_CONFIG                    0xFFC41208         /* DMA4 Configuration Register */
+#define DMA4_X_COUNT                   0xFFC4120C         /* DMA4 Inner Loop Count Start Value */
+#define DMA4_X_MODIFY                   0xFFC41210         /* DMA4 Inner Loop Address Increment */
+#define DMA4_Y_COUNT                   0xFFC41214         /* DMA4 Outer Loop Count Start Value (2D only) */
+#define DMA4_Y_MODIFY                   0xFFC41218         /* DMA4 Outer Loop Address Increment (2D only) */
+#define DMA4_CURR_DESC_PTR             0xFFC41224         /* DMA4 Current Descriptor Pointer */
+#define DMA4_PREV_DESC_PTR             0xFFC41228         /* DMA4 Previous Initial Descriptor Pointer */
+#define DMA4_CURR_ADDR               0xFFC4122C         /* DMA4 Current Address */
+#define DMA4_IRQ_STATUS                   0xFFC41230         /* DMA4 Status Register */
+#define DMA4_CURR_X_COUNT               0xFFC41234         /* DMA4 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA4_CURR_Y_COUNT               0xFFC41238         /* DMA4 Current Row Count (2D only) */
+#define DMA4_BWL_COUNT                 0xFFC41240         /* DMA4 Bandwidth Limit Count */
+#define DMA4_CURR_BWL_COUNT             0xFFC41244         /* DMA4 Bandwidth Limit Count Current */
+#define DMA4_BWM_COUNT                 0xFFC41248         /* DMA4 Bandwidth Monitor Count */
+#define DMA4_CURR_BWM_COUNT             0xFFC4124C         /* DMA4 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA5
+   ========================= */
+#define DMA5_NEXT_DESC_PTR             0xFFC41280         /* DMA5 Pointer to Next Initial Descriptor */
+#define DMA5_START_ADDR              0xFFC41284         /* DMA5 Start Address of Current Buffer */
+#define DMA5_CONFIG                    0xFFC41288         /* DMA5 Configuration Register */
+#define DMA5_X_COUNT                   0xFFC4128C         /* DMA5 Inner Loop Count Start Value */
+#define DMA5_X_MODIFY                   0xFFC41290         /* DMA5 Inner Loop Address Increment */
+#define DMA5_Y_COUNT                   0xFFC41294         /* DMA5 Outer Loop Count Start Value (2D only) */
+#define DMA5_Y_MODIFY                   0xFFC41298         /* DMA5 Outer Loop Address Increment (2D only) */
+#define DMA5_CURR_DESC_PTR             0xFFC412A4         /* DMA5 Current Descriptor Pointer */
+#define DMA5_PREV_DESC_PTR             0xFFC412A8         /* DMA5 Previous Initial Descriptor Pointer */
+#define DMA5_CURR_ADDR               0xFFC412AC         /* DMA5 Current Address */
+#define DMA5_IRQ_STATUS                   0xFFC412B0         /* DMA5 Status Register */
+#define DMA5_CURR_X_COUNT               0xFFC412B4         /* DMA5 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA5_CURR_Y_COUNT               0xFFC412B8         /* DMA5 Current Row Count (2D only) */
+#define DMA5_BWL_COUNT                 0xFFC412C0         /* DMA5 Bandwidth Limit Count */
+#define DMA5_CURR_BWL_COUNT             0xFFC412C4         /* DMA5 Bandwidth Limit Count Current */
+#define DMA5_BWM_COUNT                 0xFFC412C8         /* DMA5 Bandwidth Monitor Count */
+#define DMA5_CURR_BWM_COUNT             0xFFC412CC         /* DMA5 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA6
+   ========================= */
+#define DMA6_NEXT_DESC_PTR             0xFFC41300         /* DMA6 Pointer to Next Initial Descriptor */
+#define DMA6_START_ADDR              0xFFC41304         /* DMA6 Start Address of Current Buffer */
+#define DMA6_CONFIG                    0xFFC41308         /* DMA6 Configuration Register */
+#define DMA6_X_COUNT                   0xFFC4130C         /* DMA6 Inner Loop Count Start Value */
+#define DMA6_X_MODIFY                   0xFFC41310         /* DMA6 Inner Loop Address Increment */
+#define DMA6_Y_COUNT                   0xFFC41314         /* DMA6 Outer Loop Count Start Value (2D only) */
+#define DMA6_Y_MODIFY                   0xFFC41318         /* DMA6 Outer Loop Address Increment (2D only) */
+#define DMA6_CURR_DESC_PTR             0xFFC41324         /* DMA6 Current Descriptor Pointer */
+#define DMA6_PREV_DESC_PTR             0xFFC41328         /* DMA6 Previous Initial Descriptor Pointer */
+#define DMA6_CURR_ADDR               0xFFC4132C         /* DMA6 Current Address */
+#define DMA6_IRQ_STATUS                   0xFFC41330         /* DMA6 Status Register */
+#define DMA6_CURR_X_COUNT               0xFFC41334         /* DMA6 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA6_CURR_Y_COUNT               0xFFC41338         /* DMA6 Current Row Count (2D only) */
+#define DMA6_BWL_COUNT                 0xFFC41340         /* DMA6 Bandwidth Limit Count */
+#define DMA6_CURR_BWL_COUNT             0xFFC41344         /* DMA6 Bandwidth Limit Count Current */
+#define DMA6_BWM_COUNT                 0xFFC41348         /* DMA6 Bandwidth Monitor Count */
+#define DMA6_CURR_BWM_COUNT             0xFFC4134C         /* DMA6 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA7
+   ========================= */
+#define DMA7_NEXT_DESC_PTR             0xFFC41380         /* DMA7 Pointer to Next Initial Descriptor */
+#define DMA7_START_ADDR              0xFFC41384         /* DMA7 Start Address of Current Buffer */
+#define DMA7_CONFIG                    0xFFC41388         /* DMA7 Configuration Register */
+#define DMA7_X_COUNT                   0xFFC4138C         /* DMA7 Inner Loop Count Start Value */
+#define DMA7_X_MODIFY                   0xFFC41390         /* DMA7 Inner Loop Address Increment */
+#define DMA7_Y_COUNT                   0xFFC41394         /* DMA7 Outer Loop Count Start Value (2D only) */
+#define DMA7_Y_MODIFY                   0xFFC41398         /* DMA7 Outer Loop Address Increment (2D only) */
+#define DMA7_CURR_DESC_PTR             0xFFC413A4         /* DMA7 Current Descriptor Pointer */
+#define DMA7_PREV_DESC_PTR             0xFFC413A8         /* DMA7 Previous Initial Descriptor Pointer */
+#define DMA7_CURR_ADDR               0xFFC413AC         /* DMA7 Current Address */
+#define DMA7_IRQ_STATUS                   0xFFC413B0         /* DMA7 Status Register */
+#define DMA7_CURR_X_COUNT               0xFFC413B4         /* DMA7 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA7_CURR_Y_COUNT               0xFFC413B8         /* DMA7 Current Row Count (2D only) */
+#define DMA7_BWL_COUNT                 0xFFC413C0         /* DMA7 Bandwidth Limit Count */
+#define DMA7_CURR_BWL_COUNT             0xFFC413C4         /* DMA7 Bandwidth Limit Count Current */
+#define DMA7_BWM_COUNT                 0xFFC413C8         /* DMA7 Bandwidth Monitor Count */
+#define DMA7_CURR_BWM_COUNT             0xFFC413CC         /* DMA7 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA8
+   ========================= */
+#define DMA8_NEXT_DESC_PTR             0xFFC41400         /* DMA8 Pointer to Next Initial Descriptor */
+#define DMA8_START_ADDR              0xFFC41404         /* DMA8 Start Address of Current Buffer */
+#define DMA8_CONFIG                    0xFFC41408         /* DMA8 Configuration Register */
+#define DMA8_X_COUNT                   0xFFC4140C         /* DMA8 Inner Loop Count Start Value */
+#define DMA8_X_MODIFY                   0xFFC41410         /* DMA8 Inner Loop Address Increment */
+#define DMA8_Y_COUNT                   0xFFC41414         /* DMA8 Outer Loop Count Start Value (2D only) */
+#define DMA8_Y_MODIFY                   0xFFC41418         /* DMA8 Outer Loop Address Increment (2D only) */
+#define DMA8_CURR_DESC_PTR             0xFFC41424         /* DMA8 Current Descriptor Pointer */
+#define DMA8_PREV_DESC_PTR             0xFFC41428         /* DMA8 Previous Initial Descriptor Pointer */
+#define DMA8_CURR_ADDR               0xFFC4142C         /* DMA8 Current Address */
+#define DMA8_IRQ_STATUS                   0xFFC41430         /* DMA8 Status Register */
+#define DMA8_CURR_X_COUNT               0xFFC41434         /* DMA8 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA8_CURR_Y_COUNT               0xFFC41438         /* DMA8 Current Row Count (2D only) */
+#define DMA8_BWL_COUNT                 0xFFC41440         /* DMA8 Bandwidth Limit Count */
+#define DMA8_CURR_BWL_COUNT             0xFFC41444         /* DMA8 Bandwidth Limit Count Current */
+#define DMA8_BWM_COUNT                 0xFFC41448         /* DMA8 Bandwidth Monitor Count */
+#define DMA8_CURR_BWM_COUNT             0xFFC4144C         /* DMA8 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA9
+   ========================= */
+#define DMA9_NEXT_DESC_PTR             0xFFC41480         /* DMA9 Pointer to Next Initial Descriptor */
+#define DMA9_START_ADDR              0xFFC41484         /* DMA9 Start Address of Current Buffer */
+#define DMA9_CONFIG                    0xFFC41488         /* DMA9 Configuration Register */
+#define DMA9_X_COUNT                   0xFFC4148C         /* DMA9 Inner Loop Count Start Value */
+#define DMA9_X_MODIFY                   0xFFC41490         /* DMA9 Inner Loop Address Increment */
+#define DMA9_Y_COUNT                   0xFFC41494         /* DMA9 Outer Loop Count Start Value (2D only) */
+#define DMA9_Y_MODIFY                   0xFFC41498         /* DMA9 Outer Loop Address Increment (2D only) */
+#define DMA9_CURR_DESC_PTR             0xFFC414A4         /* DMA9 Current Descriptor Pointer */
+#define DMA9_PREV_DESC_PTR             0xFFC414A8         /* DMA9 Previous Initial Descriptor Pointer */
+#define DMA9_CURR_ADDR               0xFFC414AC         /* DMA9 Current Address */
+#define DMA9_IRQ_STATUS                   0xFFC414B0         /* DMA9 Status Register */
+#define DMA9_CURR_X_COUNT               0xFFC414B4         /* DMA9 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA9_CURR_Y_COUNT               0xFFC414B8         /* DMA9 Current Row Count (2D only) */
+#define DMA9_BWL_COUNT                 0xFFC414C0         /* DMA9 Bandwidth Limit Count */
+#define DMA9_CURR_BWL_COUNT             0xFFC414C4         /* DMA9 Bandwidth Limit Count Current */
+#define DMA9_BWM_COUNT                 0xFFC414C8         /* DMA9 Bandwidth Monitor Count */
+#define DMA9_CURR_BWM_COUNT             0xFFC414CC         /* DMA9 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA10
+   ========================= */
+#define DMA10_NEXT_DESC_PTR            0xFFC05000         /* DMA10 Pointer to Next Initial Descriptor */
+#define DMA10_START_ADDR             0xFFC05004         /* DMA10 Start Address of Current Buffer */
+#define DMA10_CONFIG                   0xFFC05008         /* DMA10 Configuration Register */
+#define DMA10_X_COUNT                  0xFFC0500C         /* DMA10 Inner Loop Count Start Value */
+#define DMA10_X_MODIFY                  0xFFC05010         /* DMA10 Inner Loop Address Increment */
+#define DMA10_Y_COUNT                  0xFFC05014         /* DMA10 Outer Loop Count Start Value (2D only) */
+#define DMA10_Y_MODIFY                  0xFFC05018         /* DMA10 Outer Loop Address Increment (2D only) */
+#define DMA10_CURR_DESC_PTR            0xFFC05024         /* DMA10 Current Descriptor Pointer */
+#define DMA10_PREV_DESC_PTR            0xFFC05028         /* DMA10 Previous Initial Descriptor Pointer */
+#define DMA10_CURR_ADDR              0xFFC0502C         /* DMA10 Current Address */
+#define DMA10_IRQ_STATUS                  0xFFC05030         /* DMA10 Status Register */
+#define DMA10_CURR_X_COUNT              0xFFC05034         /* DMA10 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA10_CURR_Y_COUNT              0xFFC05038         /* DMA10 Current Row Count (2D only) */
+#define DMA10_BWL_COUNT                0xFFC05040         /* DMA10 Bandwidth Limit Count */
+#define DMA10_CURR_BWL_COUNT            0xFFC05044         /* DMA10 Bandwidth Limit Count Current */
+#define DMA10_BWM_COUNT                0xFFC05048         /* DMA10 Bandwidth Monitor Count */
+#define DMA10_CURR_BWM_COUNT            0xFFC0504C         /* DMA10 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA11
+   ========================= */
+#define DMA11_NEXT_DESC_PTR            0xFFC05080         /* DMA11 Pointer to Next Initial Descriptor */
+#define DMA11_START_ADDR             0xFFC05084         /* DMA11 Start Address of Current Buffer */
+#define DMA11_CONFIG                   0xFFC05088         /* DMA11 Configuration Register */
+#define DMA11_X_COUNT                  0xFFC0508C         /* DMA11 Inner Loop Count Start Value */
+#define DMA11_X_MODIFY                  0xFFC05090         /* DMA11 Inner Loop Address Increment */
+#define DMA11_Y_COUNT                  0xFFC05094         /* DMA11 Outer Loop Count Start Value (2D only) */
+#define DMA11_Y_MODIFY                  0xFFC05098         /* DMA11 Outer Loop Address Increment (2D only) */
+#define DMA11_CURR_DESC_PTR            0xFFC050A4         /* DMA11 Current Descriptor Pointer */
+#define DMA11_PREV_DESC_PTR            0xFFC050A8         /* DMA11 Previous Initial Descriptor Pointer */
+#define DMA11_CURR_ADDR              0xFFC050AC         /* DMA11 Current Address */
+#define DMA11_IRQ_STATUS                  0xFFC050B0         /* DMA11 Status Register */
+#define DMA11_CURR_X_COUNT              0xFFC050B4         /* DMA11 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA11_CURR_Y_COUNT              0xFFC050B8         /* DMA11 Current Row Count (2D only) */
+#define DMA11_BWL_COUNT                0xFFC050C0         /* DMA11 Bandwidth Limit Count */
+#define DMA11_CURR_BWL_COUNT            0xFFC050C4         /* DMA11 Bandwidth Limit Count Current */
+#define DMA11_BWM_COUNT                0xFFC050C8         /* DMA11 Bandwidth Monitor Count */
+#define DMA11_CURR_BWM_COUNT            0xFFC050CC         /* DMA11 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA12
+   ========================= */
+#define DMA12_NEXT_DESC_PTR            0xFFC05100         /* DMA12 Pointer to Next Initial Descriptor */
+#define DMA12_START_ADDR             0xFFC05104         /* DMA12 Start Address of Current Buffer */
+#define DMA12_CONFIG                   0xFFC05108         /* DMA12 Configuration Register */
+#define DMA12_X_COUNT                  0xFFC0510C         /* DMA12 Inner Loop Count Start Value */
+#define DMA12_X_MODIFY                  0xFFC05110         /* DMA12 Inner Loop Address Increment */
+#define DMA12_Y_COUNT                  0xFFC05114         /* DMA12 Outer Loop Count Start Value (2D only) */
+#define DMA12_Y_MODIFY                  0xFFC05118         /* DMA12 Outer Loop Address Increment (2D only) */
+#define DMA12_CURR_DESC_PTR            0xFFC05124         /* DMA12 Current Descriptor Pointer */
+#define DMA12_PREV_DESC_PTR            0xFFC05128         /* DMA12 Previous Initial Descriptor Pointer */
+#define DMA12_CURR_ADDR              0xFFC0512C         /* DMA12 Current Address */
+#define DMA12_IRQ_STATUS                  0xFFC05130         /* DMA12 Status Register */
+#define DMA12_CURR_X_COUNT              0xFFC05134         /* DMA12 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA12_CURR_Y_COUNT              0xFFC05138         /* DMA12 Current Row Count (2D only) */
+#define DMA12_BWL_COUNT                0xFFC05140         /* DMA12 Bandwidth Limit Count */
+#define DMA12_CURR_BWL_COUNT            0xFFC05144         /* DMA12 Bandwidth Limit Count Current */
+#define DMA12_BWM_COUNT                0xFFC05148         /* DMA12 Bandwidth Monitor Count */
+#define DMA12_CURR_BWM_COUNT            0xFFC0514C         /* DMA12 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA13
+   ========================= */
+#define DMA13_NEXT_DESC_PTR            0xFFC07000         /* DMA13 Pointer to Next Initial Descriptor */
+#define DMA13_START_ADDR             0xFFC07004         /* DMA13 Start Address of Current Buffer */
+#define DMA13_CONFIG                   0xFFC07008         /* DMA13 Configuration Register */
+#define DMA13_X_COUNT                  0xFFC0700C         /* DMA13 Inner Loop Count Start Value */
+#define DMA13_X_MODIFY                  0xFFC07010         /* DMA13 Inner Loop Address Increment */
+#define DMA13_Y_COUNT                  0xFFC07014         /* DMA13 Outer Loop Count Start Value (2D only) */
+#define DMA13_Y_MODIFY                  0xFFC07018         /* DMA13 Outer Loop Address Increment (2D only) */
+#define DMA13_CURR_DESC_PTR            0xFFC07024         /* DMA13 Current Descriptor Pointer */
+#define DMA13_PREV_DESC_PTR            0xFFC07028         /* DMA13 Previous Initial Descriptor Pointer */
+#define DMA13_CURR_ADDR              0xFFC0702C         /* DMA13 Current Address */
+#define DMA13_IRQ_STATUS                  0xFFC07030         /* DMA13 Status Register */
+#define DMA13_CURR_X_COUNT              0xFFC07034         /* DMA13 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA13_CURR_Y_COUNT              0xFFC07038         /* DMA13 Current Row Count (2D only) */
+#define DMA13_BWL_COUNT                0xFFC07040         /* DMA13 Bandwidth Limit Count */
+#define DMA13_CURR_BWL_COUNT            0xFFC07044         /* DMA13 Bandwidth Limit Count Current */
+#define DMA13_BWM_COUNT                0xFFC07048         /* DMA13 Bandwidth Monitor Count */
+#define DMA13_CURR_BWM_COUNT            0xFFC0704C         /* DMA13 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA14
+   ========================= */
+#define DMA14_NEXT_DESC_PTR            0xFFC07080         /* DMA14 Pointer to Next Initial Descriptor */
+#define DMA14_START_ADDR             0xFFC07084         /* DMA14 Start Address of Current Buffer */
+#define DMA14_CONFIG                   0xFFC07088         /* DMA14 Configuration Register */
+#define DMA14_X_COUNT                  0xFFC0708C         /* DMA14 Inner Loop Count Start Value */
+#define DMA14_X_MODIFY                  0xFFC07090         /* DMA14 Inner Loop Address Increment */
+#define DMA14_Y_COUNT                  0xFFC07094         /* DMA14 Outer Loop Count Start Value (2D only) */
+#define DMA14_Y_MODIFY                  0xFFC07098         /* DMA14 Outer Loop Address Increment (2D only) */
+#define DMA14_CURR_DESC_PTR            0xFFC070A4         /* DMA14 Current Descriptor Pointer */
+#define DMA14_PREV_DESC_PTR            0xFFC070A8         /* DMA14 Previous Initial Descriptor Pointer */
+#define DMA14_CURR_ADDR              0xFFC070AC         /* DMA14 Current Address */
+#define DMA14_IRQ_STATUS                  0xFFC070B0         /* DMA14 Status Register */
+#define DMA14_CURR_X_COUNT              0xFFC070B4         /* DMA14 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA14_CURR_Y_COUNT              0xFFC070B8         /* DMA14 Current Row Count (2D only) */
+#define DMA14_BWL_COUNT                0xFFC070C0         /* DMA14 Bandwidth Limit Count */
+#define DMA14_CURR_BWL_COUNT            0xFFC070C4         /* DMA14 Bandwidth Limit Count Current */
+#define DMA14_BWM_COUNT                0xFFC070C8         /* DMA14 Bandwidth Monitor Count */
+#define DMA14_CURR_BWM_COUNT            0xFFC070CC         /* DMA14 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA15
+   ========================= */
+#define DMA15_NEXT_DESC_PTR            0xFFC07100         /* DMA15 Pointer to Next Initial Descriptor */
+#define DMA15_START_ADDR             0xFFC07104         /* DMA15 Start Address of Current Buffer */
+#define DMA15_CONFIG                   0xFFC07108         /* DMA15 Configuration Register */
+#define DMA15_X_COUNT                  0xFFC0710C         /* DMA15 Inner Loop Count Start Value */
+#define DMA15_X_MODIFY                  0xFFC07110         /* DMA15 Inner Loop Address Increment */
+#define DMA15_Y_COUNT                  0xFFC07114         /* DMA15 Outer Loop Count Start Value (2D only) */
+#define DMA15_Y_MODIFY                  0xFFC07118         /* DMA15 Outer Loop Address Increment (2D only) */
+#define DMA15_CURR_DESC_PTR            0xFFC07124         /* DMA15 Current Descriptor Pointer */
+#define DMA15_PREV_DESC_PTR            0xFFC07128         /* DMA15 Previous Initial Descriptor Pointer */
+#define DMA15_CURR_ADDR              0xFFC0712C         /* DMA15 Current Address */
+#define DMA15_IRQ_STATUS                  0xFFC07130         /* DMA15 Status Register */
+#define DMA15_CURR_X_COUNT              0xFFC07134         /* DMA15 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA15_CURR_Y_COUNT              0xFFC07138         /* DMA15 Current Row Count (2D only) */
+#define DMA15_BWL_COUNT                0xFFC07140         /* DMA15 Bandwidth Limit Count */
+#define DMA15_CURR_BWL_COUNT            0xFFC07144         /* DMA15 Bandwidth Limit Count Current */
+#define DMA15_BWM_COUNT                0xFFC07148         /* DMA15 Bandwidth Monitor Count */
+#define DMA15_CURR_BWM_COUNT            0xFFC0714C         /* DMA15 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA16
+   ========================= */
+#define DMA16_NEXT_DESC_PTR            0xFFC07180         /* DMA16 Pointer to Next Initial Descriptor */
+#define DMA16_START_ADDR             0xFFC07184         /* DMA16 Start Address of Current Buffer */
+#define DMA16_CONFIG                   0xFFC07188         /* DMA16 Configuration Register */
+#define DMA16_X_COUNT                  0xFFC0718C         /* DMA16 Inner Loop Count Start Value */
+#define DMA16_X_MODIFY                  0xFFC07190         /* DMA16 Inner Loop Address Increment */
+#define DMA16_Y_COUNT                  0xFFC07194         /* DMA16 Outer Loop Count Start Value (2D only) */
+#define DMA16_Y_MODIFY                  0xFFC07198         /* DMA16 Outer Loop Address Increment (2D only) */
+#define DMA16_CURR_DESC_PTR            0xFFC071A4         /* DMA16 Current Descriptor Pointer */
+#define DMA16_PREV_DESC_PTR            0xFFC071A8         /* DMA16 Previous Initial Descriptor Pointer */
+#define DMA16_CURR_ADDR              0xFFC071AC         /* DMA16 Current Address */
+#define DMA16_IRQ_STATUS                  0xFFC071B0         /* DMA16 Status Register */
+#define DMA16_CURR_X_COUNT              0xFFC071B4         /* DMA16 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA16_CURR_Y_COUNT              0xFFC071B8         /* DMA16 Current Row Count (2D only) */
+#define DMA16_BWL_COUNT                0xFFC071C0         /* DMA16 Bandwidth Limit Count */
+#define DMA16_CURR_BWL_COUNT            0xFFC071C4         /* DMA16 Bandwidth Limit Count Current */
+#define DMA16_BWM_COUNT                0xFFC071C8         /* DMA16 Bandwidth Monitor Count */
+#define DMA16_CURR_BWM_COUNT            0xFFC071CC         /* DMA16 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA17
+   ========================= */
+#define DMA17_NEXT_DESC_PTR            0xFFC07200         /* DMA17 Pointer to Next Initial Descriptor */
+#define DMA17_START_ADDR             0xFFC07204         /* DMA17 Start Address of Current Buffer */
+#define DMA17_CONFIG                   0xFFC07208         /* DMA17 Configuration Register */
+#define DMA17_X_COUNT                  0xFFC0720C         /* DMA17 Inner Loop Count Start Value */
+#define DMA17_X_MODIFY                  0xFFC07210         /* DMA17 Inner Loop Address Increment */
+#define DMA17_Y_COUNT                  0xFFC07214         /* DMA17 Outer Loop Count Start Value (2D only) */
+#define DMA17_Y_MODIFY                  0xFFC07218         /* DMA17 Outer Loop Address Increment (2D only) */
+#define DMA17_CURR_DESC_PTR            0xFFC07224         /* DMA17 Current Descriptor Pointer */
+#define DMA17_PREV_DESC_PTR            0xFFC07228         /* DMA17 Previous Initial Descriptor Pointer */
+#define DMA17_CURR_ADDR              0xFFC0722C         /* DMA17 Current Address */
+#define DMA17_IRQ_STATUS                  0xFFC07230         /* DMA17 Status Register */
+#define DMA17_CURR_X_COUNT              0xFFC07234         /* DMA17 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA17_CURR_Y_COUNT              0xFFC07238         /* DMA17 Current Row Count (2D only) */
+#define DMA17_BWL_COUNT                0xFFC07240         /* DMA17 Bandwidth Limit Count */
+#define DMA17_CURR_BWL_COUNT            0xFFC07244         /* DMA17 Bandwidth Limit Count Current */
+#define DMA17_BWM_COUNT                0xFFC07248         /* DMA17 Bandwidth Monitor Count */
+#define DMA17_CURR_BWM_COUNT            0xFFC0724C         /* DMA17 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA18
+   ========================= */
+#define DMA18_NEXT_DESC_PTR            0xFFC07280         /* DMA18 Pointer to Next Initial Descriptor */
+#define DMA18_START_ADDR             0xFFC07284         /* DMA18 Start Address of Current Buffer */
+#define DMA18_CONFIG                   0xFFC07288         /* DMA18 Configuration Register */
+#define DMA18_X_COUNT                  0xFFC0728C         /* DMA18 Inner Loop Count Start Value */
+#define DMA18_X_MODIFY                  0xFFC07290         /* DMA18 Inner Loop Address Increment */
+#define DMA18_Y_COUNT                  0xFFC07294         /* DMA18 Outer Loop Count Start Value (2D only) */
+#define DMA18_Y_MODIFY                  0xFFC07298         /* DMA18 Outer Loop Address Increment (2D only) */
+#define DMA18_CURR_DESC_PTR            0xFFC072A4         /* DMA18 Current Descriptor Pointer */
+#define DMA18_PREV_DESC_PTR            0xFFC072A8         /* DMA18 Previous Initial Descriptor Pointer */
+#define DMA18_CURR_ADDR              0xFFC072AC         /* DMA18 Current Address */
+#define DMA18_IRQ_STATUS                  0xFFC072B0         /* DMA18 Status Register */
+#define DMA18_CURR_X_COUNT              0xFFC072B4         /* DMA18 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA18_CURR_Y_COUNT              0xFFC072B8         /* DMA18 Current Row Count (2D only) */
+#define DMA18_BWL_COUNT                0xFFC072C0         /* DMA18 Bandwidth Limit Count */
+#define DMA18_CURR_BWL_COUNT            0xFFC072C4         /* DMA18 Bandwidth Limit Count Current */
+#define DMA18_BWM_COUNT                0xFFC072C8         /* DMA18 Bandwidth Monitor Count */
+#define DMA18_CURR_BWM_COUNT            0xFFC072CC         /* DMA18 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA19
+   ========================= */
+#define DMA19_NEXT_DESC_PTR            0xFFC07300         /* DMA19 Pointer to Next Initial Descriptor */
+#define DMA19_START_ADDR             0xFFC07304         /* DMA19 Start Address of Current Buffer */
+#define DMA19_CONFIG                   0xFFC07308         /* DMA19 Configuration Register */
+#define DMA19_X_COUNT                  0xFFC0730C         /* DMA19 Inner Loop Count Start Value */
+#define DMA19_X_MODIFY                  0xFFC07310         /* DMA19 Inner Loop Address Increment */
+#define DMA19_Y_COUNT                  0xFFC07314         /* DMA19 Outer Loop Count Start Value (2D only) */
+#define DMA19_Y_MODIFY                  0xFFC07318         /* DMA19 Outer Loop Address Increment (2D only) */
+#define DMA19_CURR_DESC_PTR            0xFFC07324         /* DMA19 Current Descriptor Pointer */
+#define DMA19_PREV_DESC_PTR            0xFFC07328         /* DMA19 Previous Initial Descriptor Pointer */
+#define DMA19_CURR_ADDR              0xFFC0732C         /* DMA19 Current Address */
+#define DMA19_IRQ_STATUS                  0xFFC07330         /* DMA19 Status Register */
+#define DMA19_CURR_X_COUNT              0xFFC07334         /* DMA19 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA19_CURR_Y_COUNT              0xFFC07338         /* DMA19 Current Row Count (2D only) */
+#define DMA19_BWL_COUNT                0xFFC07340         /* DMA19 Bandwidth Limit Count */
+#define DMA19_CURR_BWL_COUNT            0xFFC07344         /* DMA19 Bandwidth Limit Count Current */
+#define DMA19_BWM_COUNT                0xFFC07348         /* DMA19 Bandwidth Monitor Count */
+#define DMA19_CURR_BWM_COUNT            0xFFC0734C         /* DMA19 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA20
+   ========================= */
+#define DMA20_NEXT_DESC_PTR            0xFFC07380         /* DMA20 Pointer to Next Initial Descriptor */
+#define DMA20_START_ADDR             0xFFC07384         /* DMA20 Start Address of Current Buffer */
+#define DMA20_CONFIG                   0xFFC07388         /* DMA20 Configuration Register */
+#define DMA20_X_COUNT                  0xFFC0738C         /* DMA20 Inner Loop Count Start Value */
+#define DMA20_X_MODIFY                  0xFFC07390         /* DMA20 Inner Loop Address Increment */
+#define DMA20_Y_COUNT                  0xFFC07394         /* DMA20 Outer Loop Count Start Value (2D only) */
+#define DMA20_Y_MODIFY                  0xFFC07398         /* DMA20 Outer Loop Address Increment (2D only) */
+#define DMA20_CURR_DESC_PTR            0xFFC073A4         /* DMA20 Current Descriptor Pointer */
+#define DMA20_PREV_DESC_PTR            0xFFC073A8         /* DMA20 Previous Initial Descriptor Pointer */
+#define DMA20_CURR_ADDR              0xFFC073AC         /* DMA20 Current Address */
+#define DMA20_IRQ_STATUS                  0xFFC073B0         /* DMA20 Status Register */
+#define DMA20_CURR_X_COUNT              0xFFC073B4         /* DMA20 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA20_CURR_Y_COUNT              0xFFC073B8         /* DMA20 Current Row Count (2D only) */
+#define DMA20_BWL_COUNT                0xFFC073C0         /* DMA20 Bandwidth Limit Count */
+#define DMA20_CURR_BWL_COUNT            0xFFC073C4         /* DMA20 Bandwidth Limit Count Current */
+#define DMA20_BWM_COUNT                0xFFC073C8         /* DMA20 Bandwidth Monitor Count */
+#define DMA20_CURR_BWM_COUNT            0xFFC073CC         /* DMA20 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA21
+   ========================= */
+#define DMA21_NEXT_DESC_PTR            0xFFC09000         /* DMA21 Pointer to Next Initial Descriptor */
+#define DMA21_START_ADDR             0xFFC09004         /* DMA21 Start Address of Current Buffer */
+#define DMA21_CONFIG                   0xFFC09008         /* DMA21 Configuration Register */
+#define DMA21_X_COUNT                  0xFFC0900C         /* DMA21 Inner Loop Count Start Value */
+#define DMA21_X_MODIFY                  0xFFC09010         /* DMA21 Inner Loop Address Increment */
+#define DMA21_Y_COUNT                  0xFFC09014         /* DMA21 Outer Loop Count Start Value (2D only) */
+#define DMA21_Y_MODIFY                  0xFFC09018         /* DMA21 Outer Loop Address Increment (2D only) */
+#define DMA21_CURR_DESC_PTR            0xFFC09024         /* DMA21 Current Descriptor Pointer */
+#define DMA21_PREV_DESC_PTR            0xFFC09028         /* DMA21 Previous Initial Descriptor Pointer */
+#define DMA21_CURR_ADDR              0xFFC0902C         /* DMA21 Current Address */
+#define DMA21_IRQ_STATUS                  0xFFC09030         /* DMA21 Status Register */
+#define DMA21_CURR_X_COUNT              0xFFC09034         /* DMA21 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA21_CURR_Y_COUNT              0xFFC09038         /* DMA21 Current Row Count (2D only) */
+#define DMA21_BWL_COUNT                0xFFC09040         /* DMA21 Bandwidth Limit Count */
+#define DMA21_CURR_BWL_COUNT            0xFFC09044         /* DMA21 Bandwidth Limit Count Current */
+#define DMA21_BWM_COUNT                0xFFC09048         /* DMA21 Bandwidth Monitor Count */
+#define DMA21_CURR_BWM_COUNT            0xFFC0904C         /* DMA21 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA22
+   ========================= */
+#define DMA22_NEXT_DESC_PTR            0xFFC09080         /* DMA22 Pointer to Next Initial Descriptor */
+#define DMA22_START_ADDR             0xFFC09084         /* DMA22 Start Address of Current Buffer */
+#define DMA22_CONFIG                   0xFFC09088         /* DMA22 Configuration Register */
+#define DMA22_X_COUNT                  0xFFC0908C         /* DMA22 Inner Loop Count Start Value */
+#define DMA22_X_MODIFY                  0xFFC09090         /* DMA22 Inner Loop Address Increment */
+#define DMA22_Y_COUNT                  0xFFC09094         /* DMA22 Outer Loop Count Start Value (2D only) */
+#define DMA22_Y_MODIFY                  0xFFC09098         /* DMA22 Outer Loop Address Increment (2D only) */
+#define DMA22_CURR_DESC_PTR            0xFFC090A4         /* DMA22 Current Descriptor Pointer */
+#define DMA22_PREV_DESC_PTR            0xFFC090A8         /* DMA22 Previous Initial Descriptor Pointer */
+#define DMA22_CURR_ADDR              0xFFC090AC         /* DMA22 Current Address */
+#define DMA22_IRQ_STATUS                  0xFFC090B0         /* DMA22 Status Register */
+#define DMA22_CURR_X_COUNT              0xFFC090B4         /* DMA22 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA22_CURR_Y_COUNT              0xFFC090B8         /* DMA22 Current Row Count (2D only) */
+#define DMA22_BWL_COUNT                0xFFC090C0         /* DMA22 Bandwidth Limit Count */
+#define DMA22_CURR_BWL_COUNT            0xFFC090C4         /* DMA22 Bandwidth Limit Count Current */
+#define DMA22_BWM_COUNT                0xFFC090C8         /* DMA22 Bandwidth Monitor Count */
+#define DMA22_CURR_BWM_COUNT            0xFFC090CC         /* DMA22 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA23
+   ========================= */
+#define DMA23_NEXT_DESC_PTR            0xFFC09100         /* DMA23 Pointer to Next Initial Descriptor */
+#define DMA23_START_ADDR             0xFFC09104         /* DMA23 Start Address of Current Buffer */
+#define DMA23_CONFIG                   0xFFC09108         /* DMA23 Configuration Register */
+#define DMA23_X_COUNT                  0xFFC0910C         /* DMA23 Inner Loop Count Start Value */
+#define DMA23_X_MODIFY                  0xFFC09110         /* DMA23 Inner Loop Address Increment */
+#define DMA23_Y_COUNT                  0xFFC09114         /* DMA23 Outer Loop Count Start Value (2D only) */
+#define DMA23_Y_MODIFY                  0xFFC09118         /* DMA23 Outer Loop Address Increment (2D only) */
+#define DMA23_CURR_DESC_PTR            0xFFC09124         /* DMA23 Current Descriptor Pointer */
+#define DMA23_PREV_DESC_PTR            0xFFC09128         /* DMA23 Previous Initial Descriptor Pointer */
+#define DMA23_CURR_ADDR              0xFFC0912C         /* DMA23 Current Address */
+#define DMA23_IRQ_STATUS                  0xFFC09130         /* DMA23 Status Register */
+#define DMA23_CURR_X_COUNT              0xFFC09134         /* DMA23 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA23_CURR_Y_COUNT              0xFFC09138         /* DMA23 Current Row Count (2D only) */
+#define DMA23_BWL_COUNT                0xFFC09140         /* DMA23 Bandwidth Limit Count */
+#define DMA23_CURR_BWL_COUNT            0xFFC09144         /* DMA23 Bandwidth Limit Count Current */
+#define DMA23_BWM_COUNT                0xFFC09148         /* DMA23 Bandwidth Monitor Count */
+#define DMA23_CURR_BWM_COUNT            0xFFC0914C         /* DMA23 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA24
+   ========================= */
+#define DMA24_NEXT_DESC_PTR            0xFFC09180         /* DMA24 Pointer to Next Initial Descriptor */
+#define DMA24_START_ADDR             0xFFC09184         /* DMA24 Start Address of Current Buffer */
+#define DMA24_CONFIG                   0xFFC09188         /* DMA24 Configuration Register */
+#define DMA24_X_COUNT                  0xFFC0918C         /* DMA24 Inner Loop Count Start Value */
+#define DMA24_X_MODIFY                  0xFFC09190         /* DMA24 Inner Loop Address Increment */
+#define DMA24_Y_COUNT                  0xFFC09194         /* DMA24 Outer Loop Count Start Value (2D only) */
+#define DMA24_Y_MODIFY                  0xFFC09198         /* DMA24 Outer Loop Address Increment (2D only) */
+#define DMA24_CURR_DESC_PTR            0xFFC091A4         /* DMA24 Current Descriptor Pointer */
+#define DMA24_PREV_DESC_PTR            0xFFC091A8         /* DMA24 Previous Initial Descriptor Pointer */
+#define DMA24_CURR_ADDR              0xFFC091AC         /* DMA24 Current Address */
+#define DMA24_IRQ_STATUS                  0xFFC091B0         /* DMA24 Status Register */
+#define DMA24_CURR_X_COUNT              0xFFC091B4         /* DMA24 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA24_CURR_Y_COUNT              0xFFC091B8         /* DMA24 Current Row Count (2D only) */
+#define DMA24_BWL_COUNT                0xFFC091C0         /* DMA24 Bandwidth Limit Count */
+#define DMA24_CURR_BWL_COUNT            0xFFC091C4         /* DMA24 Bandwidth Limit Count Current */
+#define DMA24_BWM_COUNT                0xFFC091C8         /* DMA24 Bandwidth Monitor Count */
+#define DMA24_CURR_BWM_COUNT            0xFFC091CC         /* DMA24 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA25
+   ========================= */
+#define DMA25_NEXT_DESC_PTR            0xFFC09200         /* DMA25 Pointer to Next Initial Descriptor */
+#define DMA25_START_ADDR             0xFFC09204         /* DMA25 Start Address of Current Buffer */
+#define DMA25_CONFIG                   0xFFC09208         /* DMA25 Configuration Register */
+#define DMA25_X_COUNT                  0xFFC0920C         /* DMA25 Inner Loop Count Start Value */
+#define DMA25_X_MODIFY                  0xFFC09210         /* DMA25 Inner Loop Address Increment */
+#define DMA25_Y_COUNT                  0xFFC09214         /* DMA25 Outer Loop Count Start Value (2D only) */
+#define DMA25_Y_MODIFY                  0xFFC09218         /* DMA25 Outer Loop Address Increment (2D only) */
+#define DMA25_CURR_DESC_PTR            0xFFC09224         /* DMA25 Current Descriptor Pointer */
+#define DMA25_PREV_DESC_PTR            0xFFC09228         /* DMA25 Previous Initial Descriptor Pointer */
+#define DMA25_CURR_ADDR              0xFFC0922C         /* DMA25 Current Address */
+#define DMA25_IRQ_STATUS                  0xFFC09230         /* DMA25 Status Register */
+#define DMA25_CURR_X_COUNT              0xFFC09234         /* DMA25 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA25_CURR_Y_COUNT              0xFFC09238         /* DMA25 Current Row Count (2D only) */
+#define DMA25_BWL_COUNT                0xFFC09240         /* DMA25 Bandwidth Limit Count */
+#define DMA25_CURR_BWL_COUNT            0xFFC09244         /* DMA25 Bandwidth Limit Count Current */
+#define DMA25_BWM_COUNT                0xFFC09248         /* DMA25 Bandwidth Monitor Count */
+#define DMA25_CURR_BWM_COUNT            0xFFC0924C         /* DMA25 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA26
+   ========================= */
+#define DMA26_NEXT_DESC_PTR            0xFFC09280         /* DMA26 Pointer to Next Initial Descriptor */
+#define DMA26_START_ADDR             0xFFC09284         /* DMA26 Start Address of Current Buffer */
+#define DMA26_CONFIG                   0xFFC09288         /* DMA26 Configuration Register */
+#define DMA26_X_COUNT                  0xFFC0928C         /* DMA26 Inner Loop Count Start Value */
+#define DMA26_X_MODIFY                  0xFFC09290         /* DMA26 Inner Loop Address Increment */
+#define DMA26_Y_COUNT                  0xFFC09294         /* DMA26 Outer Loop Count Start Value (2D only) */
+#define DMA26_Y_MODIFY                  0xFFC09298         /* DMA26 Outer Loop Address Increment (2D only) */
+#define DMA26_CURR_DESC_PTR            0xFFC092A4         /* DMA26 Current Descriptor Pointer */
+#define DMA26_PREV_DESC_PTR            0xFFC092A8         /* DMA26 Previous Initial Descriptor Pointer */
+#define DMA26_CURR_ADDR              0xFFC092AC         /* DMA26 Current Address */
+#define DMA26_IRQ_STATUS                  0xFFC092B0         /* DMA26 Status Register */
+#define DMA26_CURR_X_COUNT              0xFFC092B4         /* DMA26 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA26_CURR_Y_COUNT              0xFFC092B8         /* DMA26 Current Row Count (2D only) */
+#define DMA26_BWL_COUNT                0xFFC092C0         /* DMA26 Bandwidth Limit Count */
+#define DMA26_CURR_BWL_COUNT            0xFFC092C4         /* DMA26 Bandwidth Limit Count Current */
+#define DMA26_BWM_COUNT                0xFFC092C8         /* DMA26 Bandwidth Monitor Count */
+#define DMA26_CURR_BWM_COUNT            0xFFC092CC         /* DMA26 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA27
+   ========================= */
+#define DMA27_NEXT_DESC_PTR            0xFFC09300         /* DMA27 Pointer to Next Initial Descriptor */
+#define DMA27_START_ADDR             0xFFC09304         /* DMA27 Start Address of Current Buffer */
+#define DMA27_CONFIG                   0xFFC09308         /* DMA27 Configuration Register */
+#define DMA27_X_COUNT                  0xFFC0930C         /* DMA27 Inner Loop Count Start Value */
+#define DMA27_X_MODIFY                  0xFFC09310         /* DMA27 Inner Loop Address Increment */
+#define DMA27_Y_COUNT                  0xFFC09314         /* DMA27 Outer Loop Count Start Value (2D only) */
+#define DMA27_Y_MODIFY                  0xFFC09318         /* DMA27 Outer Loop Address Increment (2D only) */
+#define DMA27_CURR_DESC_PTR            0xFFC09324         /* DMA27 Current Descriptor Pointer */
+#define DMA27_PREV_DESC_PTR            0xFFC09328         /* DMA27 Previous Initial Descriptor Pointer */
+#define DMA27_CURR_ADDR              0xFFC0932C         /* DMA27 Current Address */
+#define DMA27_IRQ_STATUS                  0xFFC09330         /* DMA27 Status Register */
+#define DMA27_CURR_X_COUNT              0xFFC09334         /* DMA27 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA27_CURR_Y_COUNT              0xFFC09338         /* DMA27 Current Row Count (2D only) */
+#define DMA27_BWL_COUNT                0xFFC09340         /* DMA27 Bandwidth Limit Count */
+#define DMA27_CURR_BWL_COUNT            0xFFC09344         /* DMA27 Bandwidth Limit Count Current */
+#define DMA27_BWM_COUNT                0xFFC09348         /* DMA27 Bandwidth Monitor Count */
+#define DMA27_CURR_BWM_COUNT            0xFFC0934C         /* DMA27 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA28
+   ========================= */
+#define DMA28_NEXT_DESC_PTR            0xFFC09380         /* DMA28 Pointer to Next Initial Descriptor */
+#define DMA28_START_ADDR             0xFFC09384         /* DMA28 Start Address of Current Buffer */
+#define DMA28_CONFIG                   0xFFC09388         /* DMA28 Configuration Register */
+#define DMA28_X_COUNT                  0xFFC0938C         /* DMA28 Inner Loop Count Start Value */
+#define DMA28_X_MODIFY                  0xFFC09390         /* DMA28 Inner Loop Address Increment */
+#define DMA28_Y_COUNT                  0xFFC09394         /* DMA28 Outer Loop Count Start Value (2D only) */
+#define DMA28_Y_MODIFY                  0xFFC09398         /* DMA28 Outer Loop Address Increment (2D only) */
+#define DMA28_CURR_DESC_PTR            0xFFC093A4         /* DMA28 Current Descriptor Pointer */
+#define DMA28_PREV_DESC_PTR            0xFFC093A8         /* DMA28 Previous Initial Descriptor Pointer */
+#define DMA28_CURR_ADDR              0xFFC093AC         /* DMA28 Current Address */
+#define DMA28_IRQ_STATUS                  0xFFC093B0         /* DMA28 Status Register */
+#define DMA28_CURR_X_COUNT              0xFFC093B4         /* DMA28 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA28_CURR_Y_COUNT              0xFFC093B8         /* DMA28 Current Row Count (2D only) */
+#define DMA28_BWL_COUNT                0xFFC093C0         /* DMA28 Bandwidth Limit Count */
+#define DMA28_CURR_BWL_COUNT            0xFFC093C4         /* DMA28 Bandwidth Limit Count Current */
+#define DMA28_BWM_COUNT                0xFFC093C8         /* DMA28 Bandwidth Monitor Count */
+#define DMA28_CURR_BWM_COUNT            0xFFC093CC         /* DMA28 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA29
+   ========================= */
+#define DMA29_NEXT_DESC_PTR            0xFFC0B000         /* DMA29 Pointer to Next Initial Descriptor */
+#define DMA29_START_ADDR             0xFFC0B004         /* DMA29 Start Address of Current Buffer */
+#define DMA29_CONFIG                   0xFFC0B008         /* DMA29 Configuration Register */
+#define DMA29_X_COUNT                  0xFFC0B00C         /* DMA29 Inner Loop Count Start Value */
+#define DMA29_X_MODIFY                  0xFFC0B010         /* DMA29 Inner Loop Address Increment */
+#define DMA29_Y_COUNT                  0xFFC0B014         /* DMA29 Outer Loop Count Start Value (2D only) */
+#define DMA29_Y_MODIFY                  0xFFC0B018         /* DMA29 Outer Loop Address Increment (2D only) */
+#define DMA29_CURR_DESC_PTR            0xFFC0B024         /* DMA29 Current Descriptor Pointer */
+#define DMA29_PREV_DESC_PTR            0xFFC0B028         /* DMA29 Previous Initial Descriptor Pointer */
+#define DMA29_CURR_ADDR              0xFFC0B02C         /* DMA29 Current Address */
+#define DMA29_IRQ_STATUS                  0xFFC0B030         /* DMA29 Status Register */
+#define DMA29_CURR_X_COUNT              0xFFC0B034         /* DMA29 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA29_CURR_Y_COUNT              0xFFC0B038         /* DMA29 Current Row Count (2D only) */
+#define DMA29_BWL_COUNT                0xFFC0B040         /* DMA29 Bandwidth Limit Count */
+#define DMA29_CURR_BWL_COUNT            0xFFC0B044         /* DMA29 Bandwidth Limit Count Current */
+#define DMA29_BWM_COUNT                0xFFC0B048         /* DMA29 Bandwidth Monitor Count */
+#define DMA29_CURR_BWM_COUNT            0xFFC0B04C         /* DMA29 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA30
+   ========================= */
+#define DMA30_NEXT_DESC_PTR            0xFFC0B080         /* DMA30 Pointer to Next Initial Descriptor */
+#define DMA30_START_ADDR             0xFFC0B084         /* DMA30 Start Address of Current Buffer */
+#define DMA30_CONFIG                   0xFFC0B088         /* DMA30 Configuration Register */
+#define DMA30_X_COUNT                  0xFFC0B08C         /* DMA30 Inner Loop Count Start Value */
+#define DMA30_X_MODIFY                  0xFFC0B090         /* DMA30 Inner Loop Address Increment */
+#define DMA30_Y_COUNT                  0xFFC0B094         /* DMA30 Outer Loop Count Start Value (2D only) */
+#define DMA30_Y_MODIFY                  0xFFC0B098         /* DMA30 Outer Loop Address Increment (2D only) */
+#define DMA30_CURR_DESC_PTR            0xFFC0B0A4         /* DMA30 Current Descriptor Pointer */
+#define DMA30_PREV_DESC_PTR            0xFFC0B0A8         /* DMA30 Previous Initial Descriptor Pointer */
+#define DMA30_CURR_ADDR              0xFFC0B0AC         /* DMA30 Current Address */
+#define DMA30_IRQ_STATUS                  0xFFC0B0B0         /* DMA30 Status Register */
+#define DMA30_CURR_X_COUNT              0xFFC0B0B4         /* DMA30 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA30_CURR_Y_COUNT              0xFFC0B0B8         /* DMA30 Current Row Count (2D only) */
+#define DMA30_BWL_COUNT                0xFFC0B0C0         /* DMA30 Bandwidth Limit Count */
+#define DMA30_CURR_BWL_COUNT            0xFFC0B0C4         /* DMA30 Bandwidth Limit Count Current */
+#define DMA30_BWM_COUNT                0xFFC0B0C8         /* DMA30 Bandwidth Monitor Count */
+#define DMA30_CURR_BWM_COUNT            0xFFC0B0CC         /* DMA30 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA31
+   ========================= */
+#define DMA31_NEXT_DESC_PTR            0xFFC0B100         /* DMA31 Pointer to Next Initial Descriptor */
+#define DMA31_START_ADDR             0xFFC0B104         /* DMA31 Start Address of Current Buffer */
+#define DMA31_CONFIG                   0xFFC0B108         /* DMA31 Configuration Register */
+#define DMA31_X_COUNT                  0xFFC0B10C         /* DMA31 Inner Loop Count Start Value */
+#define DMA31_X_MODIFY                  0xFFC0B110         /* DMA31 Inner Loop Address Increment */
+#define DMA31_Y_COUNT                  0xFFC0B114         /* DMA31 Outer Loop Count Start Value (2D only) */
+#define DMA31_Y_MODIFY                  0xFFC0B118         /* DMA31 Outer Loop Address Increment (2D only) */
+#define DMA31_CURR_DESC_PTR            0xFFC0B124         /* DMA31 Current Descriptor Pointer */
+#define DMA31_PREV_DESC_PTR            0xFFC0B128         /* DMA31 Previous Initial Descriptor Pointer */
+#define DMA31_CURR_ADDR              0xFFC0B12C         /* DMA31 Current Address */
+#define DMA31_IRQ_STATUS                  0xFFC0B130         /* DMA31 Status Register */
+#define DMA31_CURR_X_COUNT              0xFFC0B134         /* DMA31 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA31_CURR_Y_COUNT              0xFFC0B138         /* DMA31 Current Row Count (2D only) */
+#define DMA31_BWL_COUNT                0xFFC0B140         /* DMA31 Bandwidth Limit Count */
+#define DMA31_CURR_BWL_COUNT            0xFFC0B144         /* DMA31 Bandwidth Limit Count Current */
+#define DMA31_BWM_COUNT                0xFFC0B148         /* DMA31 Bandwidth Monitor Count */
+#define DMA31_CURR_BWM_COUNT            0xFFC0B14C         /* DMA31 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA32
+   ========================= */
+#define DMA32_NEXT_DESC_PTR            0xFFC0B180         /* DMA32 Pointer to Next Initial Descriptor */
+#define DMA32_START_ADDR             0xFFC0B184         /* DMA32 Start Address of Current Buffer */
+#define DMA32_CONFIG                   0xFFC0B188         /* DMA32 Configuration Register */
+#define DMA32_X_COUNT                  0xFFC0B18C         /* DMA32 Inner Loop Count Start Value */
+#define DMA32_X_MODIFY                  0xFFC0B190         /* DMA32 Inner Loop Address Increment */
+#define DMA32_Y_COUNT                  0xFFC0B194         /* DMA32 Outer Loop Count Start Value (2D only) */
+#define DMA32_Y_MODIFY                  0xFFC0B198         /* DMA32 Outer Loop Address Increment (2D only) */
+#define DMA32_CURR_DESC_PTR            0xFFC0B1A4         /* DMA32 Current Descriptor Pointer */
+#define DMA32_PREV_DESC_PTR            0xFFC0B1A8         /* DMA32 Previous Initial Descriptor Pointer */
+#define DMA32_CURR_ADDR              0xFFC0B1AC         /* DMA32 Current Address */
+#define DMA32_IRQ_STATUS                  0xFFC0B1B0         /* DMA32 Status Register */
+#define DMA32_CURR_X_COUNT              0xFFC0B1B4         /* DMA32 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA32_CURR_Y_COUNT              0xFFC0B1B8         /* DMA32 Current Row Count (2D only) */
+#define DMA32_BWL_COUNT                0xFFC0B1C0         /* DMA32 Bandwidth Limit Count */
+#define DMA32_CURR_BWL_COUNT            0xFFC0B1C4         /* DMA32 Bandwidth Limit Count Current */
+#define DMA32_BWM_COUNT                0xFFC0B1C8         /* DMA32 Bandwidth Monitor Count */
+#define DMA32_CURR_BWM_COUNT            0xFFC0B1CC         /* DMA32 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA33
+   ========================= */
+#define DMA33_NEXT_DESC_PTR            0xFFC0D000         /* DMA33 Pointer to Next Initial Descriptor */
+#define DMA33_START_ADDR             0xFFC0D004         /* DMA33 Start Address of Current Buffer */
+#define DMA33_CONFIG                   0xFFC0D008         /* DMA33 Configuration Register */
+#define DMA33_X_COUNT                  0xFFC0D00C         /* DMA33 Inner Loop Count Start Value */
+#define DMA33_X_MODIFY                  0xFFC0D010         /* DMA33 Inner Loop Address Increment */
+#define DMA33_Y_COUNT                  0xFFC0D014         /* DMA33 Outer Loop Count Start Value (2D only) */
+#define DMA33_Y_MODIFY                  0xFFC0D018         /* DMA33 Outer Loop Address Increment (2D only) */
+#define DMA33_CURR_DESC_PTR            0xFFC0D024         /* DMA33 Current Descriptor Pointer */
+#define DMA33_PREV_DESC_PTR            0xFFC0D028         /* DMA33 Previous Initial Descriptor Pointer */
+#define DMA33_CURR_ADDR              0xFFC0D02C         /* DMA33 Current Address */
+#define DMA33_IRQ_STATUS                  0xFFC0D030         /* DMA33 Status Register */
+#define DMA33_CURR_X_COUNT              0xFFC0D034         /* DMA33 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA33_CURR_Y_COUNT              0xFFC0D038         /* DMA33 Current Row Count (2D only) */
+#define DMA33_BWL_COUNT                0xFFC0D040         /* DMA33 Bandwidth Limit Count */
+#define DMA33_CURR_BWL_COUNT            0xFFC0D044         /* DMA33 Bandwidth Limit Count Current */
+#define DMA33_BWM_COUNT                0xFFC0D048         /* DMA33 Bandwidth Monitor Count */
+#define DMA33_CURR_BWM_COUNT            0xFFC0D04C         /* DMA33 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA34
+   ========================= */
+#define DMA34_NEXT_DESC_PTR            0xFFC0D080         /* DMA34 Pointer to Next Initial Descriptor */
+#define DMA34_START_ADDR             0xFFC0D084         /* DMA34 Start Address of Current Buffer */
+#define DMA34_CONFIG                   0xFFC0D088         /* DMA34 Configuration Register */
+#define DMA34_X_COUNT                  0xFFC0D08C         /* DMA34 Inner Loop Count Start Value */
+#define DMA34_X_MODIFY                  0xFFC0D090         /* DMA34 Inner Loop Address Increment */
+#define DMA34_Y_COUNT                  0xFFC0D094         /* DMA34 Outer Loop Count Start Value (2D only) */
+#define DMA34_Y_MODIFY                  0xFFC0D098         /* DMA34 Outer Loop Address Increment (2D only) */
+#define DMA34_CURR_DESC_PTR            0xFFC0D0A4         /* DMA34 Current Descriptor Pointer */
+#define DMA34_PREV_DESC_PTR            0xFFC0D0A8         /* DMA34 Previous Initial Descriptor Pointer */
+#define DMA34_CURR_ADDR              0xFFC0D0AC         /* DMA34 Current Address */
+#define DMA34_IRQ_STATUS                  0xFFC0D0B0         /* DMA34 Status Register */
+#define DMA34_CURR_X_COUNT              0xFFC0D0B4         /* DMA34 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA34_CURR_Y_COUNT              0xFFC0D0B8         /* DMA34 Current Row Count (2D only) */
+#define DMA34_BWL_COUNT                0xFFC0D0C0         /* DMA34 Bandwidth Limit Count */
+#define DMA34_CURR_BWL_COUNT            0xFFC0D0C4         /* DMA34 Bandwidth Limit Count Current */
+#define DMA34_BWM_COUNT                0xFFC0D0C8         /* DMA34 Bandwidth Monitor Count */
+#define DMA34_CURR_BWM_COUNT            0xFFC0D0CC         /* DMA34 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA35
+   ========================= */
+#define DMA35_NEXT_DESC_PTR            0xFFC10000         /* DMA35 Pointer to Next Initial Descriptor */
+#define DMA35_START_ADDR             0xFFC10004         /* DMA35 Start Address of Current Buffer */
+#define DMA35_CONFIG                   0xFFC10008         /* DMA35 Configuration Register */
+#define DMA35_X_COUNT                  0xFFC1000C         /* DMA35 Inner Loop Count Start Value */
+#define DMA35_X_MODIFY                  0xFFC10010         /* DMA35 Inner Loop Address Increment */
+#define DMA35_Y_COUNT                  0xFFC10014         /* DMA35 Outer Loop Count Start Value (2D only) */
+#define DMA35_Y_MODIFY                  0xFFC10018         /* DMA35 Outer Loop Address Increment (2D only) */
+#define DMA35_CURR_DESC_PTR            0xFFC10024         /* DMA35 Current Descriptor Pointer */
+#define DMA35_PREV_DESC_PTR            0xFFC10028         /* DMA35 Previous Initial Descriptor Pointer */
+#define DMA35_CURR_ADDR              0xFFC1002C         /* DMA35 Current Address */
+#define DMA35_IRQ_STATUS                  0xFFC10030         /* DMA35 Status Register */
+#define DMA35_CURR_X_COUNT              0xFFC10034         /* DMA35 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA35_CURR_Y_COUNT              0xFFC10038         /* DMA35 Current Row Count (2D only) */
+#define DMA35_BWL_COUNT                0xFFC10040         /* DMA35 Bandwidth Limit Count */
+#define DMA35_CURR_BWL_COUNT            0xFFC10044         /* DMA35 Bandwidth Limit Count Current */
+#define DMA35_BWM_COUNT                0xFFC10048         /* DMA35 Bandwidth Monitor Count */
+#define DMA35_CURR_BWM_COUNT            0xFFC1004C         /* DMA35 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA36
+   ========================= */
+#define DMA36_NEXT_DESC_PTR            0xFFC10080         /* DMA36 Pointer to Next Initial Descriptor */
+#define DMA36_START_ADDR             0xFFC10084         /* DMA36 Start Address of Current Buffer */
+#define DMA36_CONFIG                   0xFFC10088         /* DMA36 Configuration Register */
+#define DMA36_X_COUNT                  0xFFC1008C         /* DMA36 Inner Loop Count Start Value */
+#define DMA36_X_MODIFY                  0xFFC10090         /* DMA36 Inner Loop Address Increment */
+#define DMA36_Y_COUNT                  0xFFC10094         /* DMA36 Outer Loop Count Start Value (2D only) */
+#define DMA36_Y_MODIFY                  0xFFC10098         /* DMA36 Outer Loop Address Increment (2D only) */
+#define DMA36_CURR_DESC_PTR            0xFFC100A4         /* DMA36 Current Descriptor Pointer */
+#define DMA36_PREV_DESC_PTR            0xFFC100A8         /* DMA36 Previous Initial Descriptor Pointer */
+#define DMA36_CURR_ADDR              0xFFC100AC         /* DMA36 Current Address */
+#define DMA36_IRQ_STATUS                  0xFFC100B0         /* DMA36 Status Register */
+#define DMA36_CURR_X_COUNT              0xFFC100B4         /* DMA36 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA36_CURR_Y_COUNT              0xFFC100B8         /* DMA36 Current Row Count (2D only) */
+#define DMA36_BWL_COUNT                0xFFC100C0         /* DMA36 Bandwidth Limit Count */
+#define DMA36_CURR_BWL_COUNT            0xFFC100C4         /* DMA36 Bandwidth Limit Count Current */
+#define DMA36_BWM_COUNT                0xFFC100C8         /* DMA36 Bandwidth Monitor Count */
+#define DMA36_CURR_BWM_COUNT            0xFFC100CC         /* DMA36 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA37
+   ========================= */
+#define DMA37_NEXT_DESC_PTR            0xFFC10100         /* DMA37 Pointer to Next Initial Descriptor */
+#define DMA37_START_ADDR             0xFFC10104         /* DMA37 Start Address of Current Buffer */
+#define DMA37_CONFIG                   0xFFC10108         /* DMA37 Configuration Register */
+#define DMA37_X_COUNT                  0xFFC1010C         /* DMA37 Inner Loop Count Start Value */
+#define DMA37_X_MODIFY                  0xFFC10110         /* DMA37 Inner Loop Address Increment */
+#define DMA37_Y_COUNT                  0xFFC10114         /* DMA37 Outer Loop Count Start Value (2D only) */
+#define DMA37_Y_MODIFY                  0xFFC10118         /* DMA37 Outer Loop Address Increment (2D only) */
+#define DMA37_CURR_DESC_PTR            0xFFC10124         /* DMA37 Current Descriptor Pointer */
+#define DMA37_PREV_DESC_PTR            0xFFC10128         /* DMA37 Previous Initial Descriptor Pointer */
+#define DMA37_CURR_ADDR              0xFFC1012C         /* DMA37 Current Address */
+#define DMA37_IRQ_STATUS                  0xFFC10130         /* DMA37 Status Register */
+#define DMA37_CURR_X_COUNT              0xFFC10134         /* DMA37 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA37_CURR_Y_COUNT              0xFFC10138         /* DMA37 Current Row Count (2D only) */
+#define DMA37_BWL_COUNT                0xFFC10140         /* DMA37 Bandwidth Limit Count */
+#define DMA37_CURR_BWL_COUNT            0xFFC10144         /* DMA37 Bandwidth Limit Count Current */
+#define DMA37_BWM_COUNT                0xFFC10148         /* DMA37 Bandwidth Monitor Count */
+#define DMA37_CURR_BWM_COUNT            0xFFC1014C         /* DMA37 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA38
+   ========================= */
+#define DMA38_NEXT_DESC_PTR            0xFFC12000         /* DMA38 Pointer to Next Initial Descriptor */
+#define DMA38_START_ADDR             0xFFC12004         /* DMA38 Start Address of Current Buffer */
+#define DMA38_CONFIG                   0xFFC12008         /* DMA38 Configuration Register */
+#define DMA38_X_COUNT                  0xFFC1200C         /* DMA38 Inner Loop Count Start Value */
+#define DMA38_X_MODIFY                  0xFFC12010         /* DMA38 Inner Loop Address Increment */
+#define DMA38_Y_COUNT                  0xFFC12014         /* DMA38 Outer Loop Count Start Value (2D only) */
+#define DMA38_Y_MODIFY                  0xFFC12018         /* DMA38 Outer Loop Address Increment (2D only) */
+#define DMA38_CURR_DESC_PTR            0xFFC12024         /* DMA38 Current Descriptor Pointer */
+#define DMA38_PREV_DESC_PTR            0xFFC12028         /* DMA38 Previous Initial Descriptor Pointer */
+#define DMA38_CURR_ADDR              0xFFC1202C         /* DMA38 Current Address */
+#define DMA38_IRQ_STATUS                  0xFFC12030         /* DMA38 Status Register */
+#define DMA38_CURR_X_COUNT              0xFFC12034         /* DMA38 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA38_CURR_Y_COUNT              0xFFC12038         /* DMA38 Current Row Count (2D only) */
+#define DMA38_BWL_COUNT                0xFFC12040         /* DMA38 Bandwidth Limit Count */
+#define DMA38_CURR_BWL_COUNT            0xFFC12044         /* DMA38 Bandwidth Limit Count Current */
+#define DMA38_BWM_COUNT                0xFFC12048         /* DMA38 Bandwidth Monitor Count */
+#define DMA38_CURR_BWM_COUNT            0xFFC1204C         /* DMA38 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA39
+   ========================= */
+#define DMA39_NEXT_DESC_PTR            0xFFC12080         /* DMA39 Pointer to Next Initial Descriptor */
+#define DMA39_START_ADDR             0xFFC12084         /* DMA39 Start Address of Current Buffer */
+#define DMA39_CONFIG                   0xFFC12088         /* DMA39 Configuration Register */
+#define DMA39_X_COUNT                  0xFFC1208C         /* DMA39 Inner Loop Count Start Value */
+#define DMA39_X_MODIFY                  0xFFC12090         /* DMA39 Inner Loop Address Increment */
+#define DMA39_Y_COUNT                  0xFFC12094         /* DMA39 Outer Loop Count Start Value (2D only) */
+#define DMA39_Y_MODIFY                  0xFFC12098         /* DMA39 Outer Loop Address Increment (2D only) */
+#define DMA39_CURR_DESC_PTR            0xFFC120A4         /* DMA39 Current Descriptor Pointer */
+#define DMA39_PREV_DESC_PTR            0xFFC120A8         /* DMA39 Previous Initial Descriptor Pointer */
+#define DMA39_CURR_ADDR              0xFFC120AC         /* DMA39 Current Address */
+#define DMA39_IRQ_STATUS                  0xFFC120B0         /* DMA39 Status Register */
+#define DMA39_CURR_X_COUNT              0xFFC120B4         /* DMA39 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA39_CURR_Y_COUNT              0xFFC120B8         /* DMA39 Current Row Count (2D only) */
+#define DMA39_BWL_COUNT                0xFFC120C0         /* DMA39 Bandwidth Limit Count */
+#define DMA39_CURR_BWL_COUNT            0xFFC120C4         /* DMA39 Bandwidth Limit Count Current */
+#define DMA39_BWM_COUNT                0xFFC120C8         /* DMA39 Bandwidth Monitor Count */
+#define DMA39_CURR_BWM_COUNT            0xFFC120CC         /* DMA39 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA40
+   ========================= */
+#define DMA40_NEXT_DESC_PTR            0xFFC12100         /* DMA40 Pointer to Next Initial Descriptor */
+#define DMA40_START_ADDR             0xFFC12104         /* DMA40 Start Address of Current Buffer */
+#define DMA40_CONFIG                   0xFFC12108         /* DMA40 Configuration Register */
+#define DMA40_X_COUNT                  0xFFC1210C         /* DMA40 Inner Loop Count Start Value */
+#define DMA40_X_MODIFY                  0xFFC12110         /* DMA40 Inner Loop Address Increment */
+#define DMA40_Y_COUNT                  0xFFC12114         /* DMA40 Outer Loop Count Start Value (2D only) */
+#define DMA40_Y_MODIFY                  0xFFC12118         /* DMA40 Outer Loop Address Increment (2D only) */
+#define DMA40_CURR_DESC_PTR            0xFFC12124         /* DMA40 Current Descriptor Pointer */
+#define DMA40_PREV_DESC_PTR            0xFFC12128         /* DMA40 Previous Initial Descriptor Pointer */
+#define DMA40_CURR_ADDR              0xFFC1212C         /* DMA40 Current Address */
+#define DMA40_IRQ_STATUS                  0xFFC12130         /* DMA40 Status Register */
+#define DMA40_CURR_X_COUNT              0xFFC12134         /* DMA40 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA40_CURR_Y_COUNT              0xFFC12138         /* DMA40 Current Row Count (2D only) */
+#define DMA40_BWL_COUNT                0xFFC12140         /* DMA40 Bandwidth Limit Count */
+#define DMA40_CURR_BWL_COUNT            0xFFC12144         /* DMA40 Bandwidth Limit Count Current */
+#define DMA40_BWM_COUNT                0xFFC12148         /* DMA40 Bandwidth Monitor Count */
+#define DMA40_CURR_BWM_COUNT            0xFFC1214C         /* DMA40 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA41
+   ========================= */
+#define DMA41_NEXT_DESC_PTR            0xFFC12180         /* DMA41 Pointer to Next Initial Descriptor */
+#define DMA41_START_ADDR             0xFFC12184         /* DMA41 Start Address of Current Buffer */
+#define DMA41_CONFIG                   0xFFC12188         /* DMA41 Configuration Register */
+#define DMA41_X_COUNT                  0xFFC1218C         /* DMA41 Inner Loop Count Start Value */
+#define DMA41_X_MODIFY                  0xFFC12190         /* DMA41 Inner Loop Address Increment */
+#define DMA41_Y_COUNT                  0xFFC12194         /* DMA41 Outer Loop Count Start Value (2D only) */
+#define DMA41_Y_MODIFY                  0xFFC12198         /* DMA41 Outer Loop Address Increment (2D only) */
+#define DMA41_CURR_DESC_PTR            0xFFC121A4         /* DMA41 Current Descriptor Pointer */
+#define DMA41_PREV_DESC_PTR            0xFFC121A8         /* DMA41 Previous Initial Descriptor Pointer */
+#define DMA41_CURR_ADDR              0xFFC121AC         /* DMA41 Current Address */
+#define DMA41_IRQ_STATUS                  0xFFC121B0         /* DMA41 Status Register */
+#define DMA41_CURR_X_COUNT              0xFFC121B4         /* DMA41 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA41_CURR_Y_COUNT              0xFFC121B8         /* DMA41 Current Row Count (2D only) */
+#define DMA41_BWL_COUNT                0xFFC121C0         /* DMA41 Bandwidth Limit Count */
+#define DMA41_CURR_BWL_COUNT            0xFFC121C4         /* DMA41 Bandwidth Limit Count Current */
+#define DMA41_BWM_COUNT                0xFFC121C8         /* DMA41 Bandwidth Monitor Count */
+#define DMA41_CURR_BWM_COUNT            0xFFC121CC         /* DMA41 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA42
+   ========================= */
+#define DMA42_NEXT_DESC_PTR            0xFFC14000         /* DMA42 Pointer to Next Initial Descriptor */
+#define DMA42_START_ADDR             0xFFC14004         /* DMA42 Start Address of Current Buffer */
+#define DMA42_CONFIG                   0xFFC14008         /* DMA42 Configuration Register */
+#define DMA42_X_COUNT                  0xFFC1400C         /* DMA42 Inner Loop Count Start Value */
+#define DMA42_X_MODIFY                  0xFFC14010         /* DMA42 Inner Loop Address Increment */
+#define DMA42_Y_COUNT                  0xFFC14014         /* DMA42 Outer Loop Count Start Value (2D only) */
+#define DMA42_Y_MODIFY                  0xFFC14018         /* DMA42 Outer Loop Address Increment (2D only) */
+#define DMA42_CURR_DESC_PTR            0xFFC14024         /* DMA42 Current Descriptor Pointer */
+#define DMA42_PREV_DESC_PTR            0xFFC14028         /* DMA42 Previous Initial Descriptor Pointer */
+#define DMA42_CURR_ADDR              0xFFC1402C         /* DMA42 Current Address */
+#define DMA42_IRQ_STATUS                  0xFFC14030         /* DMA42 Status Register */
+#define DMA42_CURR_X_COUNT              0xFFC14034         /* DMA42 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA42_CURR_Y_COUNT              0xFFC14038         /* DMA42 Current Row Count (2D only) */
+#define DMA42_BWL_COUNT                0xFFC14040         /* DMA42 Bandwidth Limit Count */
+#define DMA42_CURR_BWL_COUNT            0xFFC14044         /* DMA42 Bandwidth Limit Count Current */
+#define DMA42_BWM_COUNT                0xFFC14048         /* DMA42 Bandwidth Monitor Count */
+#define DMA42_CURR_BWM_COUNT            0xFFC1404C         /* DMA42 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA43
+   ========================= */
+#define DMA43_NEXT_DESC_PTR            0xFFC14080         /* DMA43 Pointer to Next Initial Descriptor */
+#define DMA43_START_ADDR             0xFFC14084         /* DMA43 Start Address of Current Buffer */
+#define DMA43_CONFIG                   0xFFC14088         /* DMA43 Configuration Register */
+#define DMA43_X_COUNT                  0xFFC1408C         /* DMA43 Inner Loop Count Start Value */
+#define DMA43_X_MODIFY                  0xFFC14090         /* DMA43 Inner Loop Address Increment */
+#define DMA43_Y_COUNT                  0xFFC14094         /* DMA43 Outer Loop Count Start Value (2D only) */
+#define DMA43_Y_MODIFY                  0xFFC14098         /* DMA43 Outer Loop Address Increment (2D only) */
+#define DMA43_CURR_DESC_PTR            0xFFC140A4         /* DMA43 Current Descriptor Pointer */
+#define DMA43_PREV_DESC_PTR            0xFFC140A8         /* DMA43 Previous Initial Descriptor Pointer */
+#define DMA43_CURR_ADDR              0xFFC140AC         /* DMA43 Current Address */
+#define DMA43_IRQ_STATUS                  0xFFC140B0         /* DMA43 Status Register */
+#define DMA43_CURR_X_COUNT              0xFFC140B4         /* DMA43 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA43_CURR_Y_COUNT              0xFFC140B8         /* DMA43 Current Row Count (2D only) */
+#define DMA43_BWL_COUNT                0xFFC140C0         /* DMA43 Bandwidth Limit Count */
+#define DMA43_CURR_BWL_COUNT            0xFFC140C4         /* DMA43 Bandwidth Limit Count Current */
+#define DMA43_BWM_COUNT                0xFFC140C8         /* DMA43 Bandwidth Monitor Count */
+#define DMA43_CURR_BWM_COUNT            0xFFC140CC         /* DMA43 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA44
+   ========================= */
+#define DMA44_NEXT_DESC_PTR            0xFFC14100         /* DMA44 Pointer to Next Initial Descriptor */
+#define DMA44_START_ADDR             0xFFC14104         /* DMA44 Start Address of Current Buffer */
+#define DMA44_CONFIG                   0xFFC14108         /* DMA44 Configuration Register */
+#define DMA44_X_COUNT                  0xFFC1410C         /* DMA44 Inner Loop Count Start Value */
+#define DMA44_X_MODIFY                  0xFFC14110         /* DMA44 Inner Loop Address Increment */
+#define DMA44_Y_COUNT                  0xFFC14114         /* DMA44 Outer Loop Count Start Value (2D only) */
+#define DMA44_Y_MODIFY                  0xFFC14118         /* DMA44 Outer Loop Address Increment (2D only) */
+#define DMA44_CURR_DESC_PTR            0xFFC14124         /* DMA44 Current Descriptor Pointer */
+#define DMA44_PREV_DESC_PTR            0xFFC14128         /* DMA44 Previous Initial Descriptor Pointer */
+#define DMA44_CURR_ADDR              0xFFC1412C         /* DMA44 Current Address */
+#define DMA44_IRQ_STATUS                  0xFFC14130         /* DMA44 Status Register */
+#define DMA44_CURR_X_COUNT              0xFFC14134         /* DMA44 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA44_CURR_Y_COUNT              0xFFC14138         /* DMA44 Current Row Count (2D only) */
+#define DMA44_BWL_COUNT                0xFFC14140         /* DMA44 Bandwidth Limit Count */
+#define DMA44_CURR_BWL_COUNT            0xFFC14144         /* DMA44 Bandwidth Limit Count Current */
+#define DMA44_BWM_COUNT                0xFFC14148         /* DMA44 Bandwidth Monitor Count */
+#define DMA44_CURR_BWM_COUNT            0xFFC1414C         /* DMA44 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA45
+   ========================= */
+#define DMA45_NEXT_DESC_PTR            0xFFC14180         /* DMA45 Pointer to Next Initial Descriptor */
+#define DMA45_START_ADDR             0xFFC14184         /* DMA45 Start Address of Current Buffer */
+#define DMA45_CONFIG                   0xFFC14188         /* DMA45 Configuration Register */
+#define DMA45_X_COUNT                  0xFFC1418C         /* DMA45 Inner Loop Count Start Value */
+#define DMA45_X_MODIFY                  0xFFC14190         /* DMA45 Inner Loop Address Increment */
+#define DMA45_Y_COUNT                  0xFFC14194         /* DMA45 Outer Loop Count Start Value (2D only) */
+#define DMA45_Y_MODIFY                  0xFFC14198         /* DMA45 Outer Loop Address Increment (2D only) */
+#define DMA45_CURR_DESC_PTR            0xFFC141A4         /* DMA45 Current Descriptor Pointer */
+#define DMA45_PREV_DESC_PTR            0xFFC141A8         /* DMA45 Previous Initial Descriptor Pointer */
+#define DMA45_CURR_ADDR              0xFFC141AC         /* DMA45 Current Address */
+#define DMA45_IRQ_STATUS                  0xFFC141B0         /* DMA45 Status Register */
+#define DMA45_CURR_X_COUNT              0xFFC141B4         /* DMA45 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA45_CURR_Y_COUNT              0xFFC141B8         /* DMA45 Current Row Count (2D only) */
+#define DMA45_BWL_COUNT                0xFFC141C0         /* DMA45 Bandwidth Limit Count */
+#define DMA45_CURR_BWL_COUNT            0xFFC141C4         /* DMA45 Bandwidth Limit Count Current */
+#define DMA45_BWM_COUNT                0xFFC141C8         /* DMA45 Bandwidth Monitor Count */
+#define DMA45_CURR_BWM_COUNT            0xFFC141CC         /* DMA45 Bandwidth Monitor Count Current */
+
+/* =========================
+        DMA46
+   ========================= */
+#define DMA46_NEXT_DESC_PTR            0xFFC14200         /* DMA46 Pointer to Next Initial Descriptor */
+#define DMA46_START_ADDR             0xFFC14204         /* DMA46 Start Address of Current Buffer */
+#define DMA46_CONFIG                   0xFFC14208         /* DMA46 Configuration Register */
+#define DMA46_X_COUNT                  0xFFC1420C         /* DMA46 Inner Loop Count Start Value */
+#define DMA46_X_MODIFY                  0xFFC14210         /* DMA46 Inner Loop Address Increment */
+#define DMA46_Y_COUNT                  0xFFC14214         /* DMA46 Outer Loop Count Start Value (2D only) */
+#define DMA46_Y_MODIFY                  0xFFC14218         /* DMA46 Outer Loop Address Increment (2D only) */
+#define DMA46_CURR_DESC_PTR            0xFFC14224         /* DMA46 Current Descriptor Pointer */
+#define DMA46_PREV_DESC_PTR            0xFFC14228         /* DMA46 Previous Initial Descriptor Pointer */
+#define DMA46_CURR_ADDR              0xFFC1422C         /* DMA46 Current Address */
+#define DMA46_IRQ_STATUS                  0xFFC14230         /* DMA46 Status Register */
+#define DMA46_CURR_X_COUNT              0xFFC14234         /* DMA46 Current Count(1D) or intra-row XCNT (2D) */
+#define DMA46_CURR_Y_COUNT              0xFFC14238         /* DMA46 Current Row Count (2D only) */
+#define DMA46_BWL_COUNT                0xFFC14240         /* DMA46 Bandwidth Limit Count */
+#define DMA46_CURR_BWL_COUNT            0xFFC14244         /* DMA46 Bandwidth Limit Count Current */
+#define DMA46_BWM_COUNT                0xFFC14248         /* DMA46 Bandwidth Monitor Count */
+#define DMA46_CURR_BWM_COUNT            0xFFC1424C         /* DMA46 Bandwidth Monitor Count Current */
+
+
+/********************************************************************************
+    DMA Alias Definitions
+ ********************************************************************************/
+#define MDMA0_DEST_CRC0_NEXT_DESC_PTR   (DMA22_NEXT_DESC_PTR)
+#define MDMA0_DEST_CRC0_START_ADDR    (DMA22_START_ADDR)
+#define MDMA0_DEST_CRC0_CONFIG          (DMA22_CONFIG)
+#define MDMA0_DEST_CRC0_X_COUNT         (DMA22_X_COUNT)
+#define MDMA0_DEST_CRC0_X_MODIFY         (DMA22_X_MODIFY)
+#define MDMA0_DEST_CRC0_Y_COUNT         (DMA22_Y_COUNT)
+#define MDMA0_DEST_CRC0_Y_MODIFY         (DMA22_Y_MODIFY)
+#define MDMA0_DEST_CRC0_CURR_DESC_PTR   (DMA22_CURR_DESC_PTR)
+#define MDMA0_DEST_CRC0_PREV_DESC_PTR   (DMA22_PREV_DESC_PTR)
+#define MDMA0_DEST_CRC0_CURR_ADDR     (DMA22_CURR_ADDR)
+#define MDMA0_DEST_CRC0_IRQ_STATUS         (DMA22_IRQ_STATUS)
+#define MDMA0_DEST_CRC0_CURR_X_COUNT     (DMA22_CURR_X_COUNT)
+#define MDMA0_DEST_CRC0_CURR_Y_COUNT     (DMA22_CURR_Y_COUNT)
+#define MDMA0_DEST_CRC0_BWL_COUNT       (DMA22_BWL_COUNT)
+#define MDMA0_DEST_CRC0_CURR_BWL_COUNT   (DMA22_CURR_BWL_COUNT)
+#define MDMA0_DEST_CRC0_BWM_COUNT       (DMA22_BWM_COUNT)
+#define MDMA0_DEST_CRC0_CURR_BWM_COUNT   (DMA22_CURR_BWM_COUNT)
+#define MDMA0_SRC_CRC0_NEXT_DESC_PTR    (DMA21_NEXT_DESC_PTR)
+#define MDMA0_SRC_CRC0_START_ADDR     (DMA21_START_ADDR)
+#define MDMA0_SRC_CRC0_CONFIG           (DMA21_CONFIG)
+#define MDMA0_SRC_CRC0_X_COUNT          (DMA21_X_COUNT)
+#define MDMA0_SRC_CRC0_X_MODIFY          (DMA21_X_MODIFY)
+#define MDMA0_SRC_CRC0_Y_COUNT          (DMA21_Y_COUNT)
+#define MDMA0_SRC_CRC0_Y_MODIFY          (DMA21_Y_MODIFY)
+#define MDMA0_SRC_CRC0_CURR_DESC_PTR    (DMA21_CURR_DESC_PTR)
+#define MDMA0_SRC_CRC0_PREV_DESC_PTR    (DMA21_PREV_DESC_PTR)
+#define MDMA0_SRC_CRC0_CURR_ADDR      (DMA21_CURR_ADDR)
+#define MDMA0_SRC_CRC0_IRQ_STATUS          (DMA21_IRQ_STATUS)
+#define MDMA0_SRC_CRC0_CURR_X_COUNT      (DMA21_CURR_X_COUNT)
+#define MDMA0_SRC_CRC0_CURR_Y_COUNT      (DMA21_CURR_Y_COUNT)
+#define MDMA0_SRC_CRC0_BWL_COUNT        (DMA21_BWL_COUNT)
+#define MDMA0_SRC_CRC0_CURR_BWL_COUNT    (DMA21_CURR_BWL_COUNT)
+#define MDMA0_SRC_CRC0_BWM_COUNT        (DMA21_BWM_COUNT)
+#define MDMA0_SRC_CRC0_CURR_BWM_COUNT    (DMA21_CURR_BWM_COUNT)
+#define MDMA1_DEST_CRC1_NEXT_DESC_PTR   (DMA24_NEXT_DESC_PTR)
+#define MDMA1_DEST_CRC1_START_ADDR    (DMA24_START_ADDR)
+#define MDMA1_DEST_CRC1_CONFIG          (DMA24_CONFIG)
+#define MDMA1_DEST_CRC1_X_COUNT         (DMA24_X_COUNT)
+#define MDMA1_DEST_CRC1_X_MODIFY         (DMA24_X_MODIFY)
+#define MDMA1_DEST_CRC1_Y_COUNT         (DMA24_Y_COUNT)
+#define MDMA1_DEST_CRC1_Y_MODIFY         (DMA24_Y_MODIFY)
+#define MDMA1_DEST_CRC1_CURR_DESC_PTR   (DMA24_CURR_DESC_PTR)
+#define MDMA1_DEST_CRC1_PREV_DESC_PTR   (DMA24_PREV_DESC_PTR)
+#define MDMA1_DEST_CRC1_CURR_ADDR     (DMA24_CURR_ADDR)
+#define MDMA1_DEST_CRC1_IRQ_STATUS         (DMA24_IRQ_STATUS)
+#define MDMA1_DEST_CRC1_CURR_X_COUNT     (DMA24_CURR_X_COUNT)
+#define MDMA1_DEST_CRC1_CURR_Y_COUNT     (DMA24_CURR_Y_COUNT)
+#define MDMA1_DEST_CRC1_BWL_COUNT       (DMA24_BWL_COUNT)
+#define MDMA1_DEST_CRC1_CURR_BWL_COUNT   (DMA24_CURR_BWL_COUNT)
+#define MDMA1_DEST_CRC1_BWM_COUNT       (DMA24_BWM_COUNT)
+#define MDMA1_DEST_CRC1_CURR_BWM_COUNT   (DMA24_CURR_BWM_COUNT)
+#define MDMA1_SRC_CRC1_NEXT_DESC_PTR    (DMA23_NEXT_DESC_PTR)
+#define MDMA1_SRC_CRC1_START_ADDR     (DMA23_START_ADDR)
+#define MDMA1_SRC_CRC1_CONFIG           (DMA23_CONFIG)
+#define MDMA1_SRC_CRC1_X_COUNT          (DMA23_X_COUNT)
+#define MDMA1_SRC_CRC1_X_MODIFY          (DMA23_X_MODIFY)
+#define MDMA1_SRC_CRC1_Y_COUNT          (DMA23_Y_COUNT)
+#define MDMA1_SRC_CRC1_Y_MODIFY          (DMA23_Y_MODIFY)
+#define MDMA1_SRC_CRC1_CURR_DESC_PTR    (DMA23_CURR_DESC_PTR)
+#define MDMA1_SRC_CRC1_PREV_DESC_PTR    (DMA23_PREV_DESC_PTR)
+#define MDMA1_SRC_CRC1_CURR_ADDR      (DMA23_CURR_ADDR)
+#define MDMA1_SRC_CRC1_IRQ_STATUS          (DMA23_IRQ_STATUS)
+#define MDMA1_SRC_CRC1_CURR_X_COUNT      (DMA23_CURR_X_COUNT)
+#define MDMA1_SRC_CRC1_CURR_Y_COUNT      (DMA23_CURR_Y_COUNT)
+#define MDMA1_SRC_CRC1_BWL_COUNT        (DMA23_BWL_COUNT)
+#define MDMA1_SRC_CRC1_CURR_BWL_COUNT    (DMA23_CURR_BWL_COUNT)
+#define MDMA1_SRC_CRC1_BWM_COUNT        (DMA23_BWM_COUNT)
+#define MDMA1_SRC_CRC1_CURR_BWM_COUNT    (DMA23_CURR_BWM_COUNT)
+#define MDMA2_DEST_NEXT_DESC_PTR            (DMA26_NEXT_DESC_PTR)
+#define MDMA2_DEST_START_ADDR             (DMA26_START_ADDR)
+#define MDMA2_DEST_CONFIG                   (DMA26_CONFIG)
+#define MDMA2_DEST_X_COUNT                  (DMA26_X_COUNT)
+#define MDMA2_DEST_X_MODIFY                  (DMA26_X_MODIFY)
+#define MDMA2_DEST_Y_COUNT                  (DMA26_Y_COUNT)
+#define MDMA2_DEST_Y_MODIFY                  (DMA26_Y_MODIFY)
+#define MDMA2_DEST_CURR_DESC_PTR            (DMA26_CURR_DESC_PTR)
+#define MDMA2_DEST_PREV_DESC_PTR            (DMA26_PREV_DESC_PTR)
+#define MDMA2_DEST_CURR_ADDR              (DMA26_CURR_ADDR)
+#define MDMA2_DEST_IRQ_STATUS                  (DMA26_IRQ_STATUS)
+#define MDMA2_DEST_CURR_X_COUNT              (DMA26_CURR_X_COUNT)
+#define MDMA2_DEST_CURR_Y_COUNT              (DMA26_CURR_Y_COUNT)
+#define MDMA2_DEST_BWL_COUNT                (DMA26_BWL_COUNT)
+#define MDMA2_DEST_CURR_BWL_COUNT            (DMA26_CURR_BWL_COUNT)
+#define MDMA2_DEST_BWM_COUNT                (DMA26_BWM_COUNT)
+#define MDMA2_DEST_CURR_BWM_COUNT            (DMA26_CURR_BWM_COUNT)
+#define MDMA2_SRC_NEXT_DESC_PTR            (DMA25_NEXT_DESC_PTR)
+#define MDMA2_SRC_START_ADDR             (DMA25_START_ADDR)
+#define MDMA2_SRC_CONFIG                   (DMA25_CONFIG)
+#define MDMA2_SRC_X_COUNT                  (DMA25_X_COUNT)
+#define MDMA2_SRC_X_MODIFY                  (DMA25_X_MODIFY)
+#define MDMA2_SRC_Y_COUNT                  (DMA25_Y_COUNT)
+#define MDMA2_SRC_Y_MODIFY                  (DMA25_Y_MODIFY)
+#define MDMA2_SRC_CURR_DESC_PTR            (DMA25_CURR_DESC_PTR)
+#define MDMA2_SRC_PREV_DESC_PTR            (DMA25_PREV_DESC_PTR)
+#define MDMA2_SRC_CURR_ADDR              (DMA25_CURR_ADDR)
+#define MDMA2_SRC_IRQ_STATUS                  (DMA25_IRQ_STATUS)
+#define MDMA2_SRC_CURR_X_COUNT              (DMA25_CURR_X_COUNT)
+#define MDMA2_SRC_CURR_Y_COUNT              (DMA25_CURR_Y_COUNT)
+#define MDMA2_SRC_BWL_COUNT                (DMA25_BWL_COUNT)
+#define MDMA2_SRC_CURR_BWL_COUNT            (DMA25_CURR_BWL_COUNT)
+#define MDMA2_SRC_BWM_COUNT                (DMA25_BWM_COUNT)
+#define MDMA2_SRC_CURR_BWM_COUNT            (DMA25_CURR_BWM_COUNT)
+#define MDMA3_DEST_NEXT_DESC_PTR            (DMA28_NEXT_DESC_PTR)
+#define MDMA3_DEST_START_ADDR             (DMA28_START_ADDR)
+#define MDMA3_DEST_CONFIG                   (DMA28_CONFIG)
+#define MDMA3_DEST_X_COUNT                  (DMA28_X_COUNT)
+#define MDMA3_DEST_X_MODIFY                  (DMA28_X_MODIFY)
+#define MDMA3_DEST_Y_COUNT                  (DMA28_Y_COUNT)
+#define MDMA3_DEST_Y_MODIFY                  (DMA28_Y_MODIFY)
+#define MDMA3_DEST_CURR_DESC_PTR            (DMA28_CURR_DESC_PTR)
+#define MDMA3_DEST_PREV_DESC_PTR            (DMA28_PREV_DESC_PTR)
+#define MDMA3_DEST_CURR_ADDR              (DMA28_CURR_ADDR)
+#define MDMA3_DEST_IRQ_STATUS                  (DMA28_IRQ_STATUS)
+#define MDMA3_DEST_CURR_X_COUNT              (DMA28_CURR_X_COUNT)
+#define MDMA3_DEST_CURR_Y_COUNT              (DMA28_CURR_Y_COUNT)
+#define MDMA3_DEST_BWL_COUNT                (DMA28_BWL_COUNT)
+#define MDMA3_DEST_CURR_BWL_COUNT            (DMA28_CURR_BWL_COUNT)
+#define MDMA3_DEST_BWM_COUNT                (DMA28_BWM_COUNT)
+#define MDMA3_DEST_CURR_BWM_COUNT            (DMA28_CURR_BWM_COUNT)
+#define MDMA3_SRC_NEXT_DESC_PTR            (DMA27_NEXT_DESC_PTR)
+#define MDMA3_SRC_START_ADDR             (DMA27_START_ADDR)
+#define MDMA3_SRC_CONFIG                   (DMA27_CONFIG)
+#define MDMA3_SRC_X_COUNT                  (DMA27_X_COUNT)
+#define MDMA3_SRC_X_MODIFY                  (DMA27_X_MODIFY)
+#define MDMA3_SRC_Y_COUNT                  (DMA27_Y_COUNT)
+#define MDMA3_SRC_Y_MODIFY                  (DMA27_Y_MODIFY)
+#define MDMA3_SRC_CURR_DESC_PTR            (DMA27_CURR_DESC_PTR)
+#define MDMA3_SRC_PREV_DESC_PTR            (DMA27_PREV_DESC_PTR)
+#define MDMA3_SRC_CURR_ADDR              (DMA27_CURR_ADDR)
+#define MDMA3_SRC_IRQ_STATUS                  (DMA27_IRQ_STATUS)
+#define MDMA3_SRC_CURR_X_COUNT              (DMA27_CURR_X_COUNT)
+#define MDMA3_SRC_CURR_Y_COUNT              (DMA27_CURR_Y_COUNT)
+#define MDMA3_SRC_BWL_COUNT                (DMA27_BWL_COUNT)
+#define MDMA3_SRC_CURR_BWL_COUNT            (DMA27_CURR_BWL_COUNT)
+#define MDMA3_SRC_BWM_COUNT                (DMA27_BWM_COUNT)
+#define MDMA3_SRC_CURR_BWM_COUNT            (DMA27_CURR_BWM_COUNT)
+
+
+/* =========================
+        DMC Registers
+   ========================= */
+
+/* =========================
+        DMC0
+   ========================= */
+#define DMC0_ID                     0xFFC80000         /* DMC0 Identification Register */
+#define DMC0_CTL                    0xFFC80004         /* DMC0 Control Register */
+#define DMC0_STAT                   0xFFC80008         /* DMC0 Status Register */
+#define DMC0_EFFCTL                 0xFFC8000C         /* DMC0 Efficiency Controller */
+#define DMC0_PRIO                   0xFFC80010         /* DMC0 Priority ID Register */
+#define DMC0_PRIOMSK                0xFFC80014         /* DMC0 Priority ID Mask */
+#define DMC0_CFG                    0xFFC80040         /* DMC0 SDRAM Configuration */
+#define DMC0_TR0                    0xFFC80044         /* DMC0 Timing Register 0 */
+#define DMC0_TR1                    0xFFC80048         /* DMC0 Timing Register 1 */
+#define DMC0_TR2                    0xFFC8004C         /* DMC0 Timing Register 2 */
+#define DMC0_MSK                    0xFFC8005C         /* DMC0 Mode Register Mask */
+#define DMC0_MR                     0xFFC80060         /* DMC0 Mode Shadow register */
+#define DMC0_EMR1                   0xFFC80064         /* DMC0 EMR1 Shadow Register */
+#define DMC0_EMR2                   0xFFC80068         /* DMC0 EMR2 Shadow Register */
+#define DMC0_EMR3                   0xFFC8006C         /* DMC0 EMR3 Shadow Register */
+#define DMC0_DLLCTL                 0xFFC80080         /* DMC0 DLL Control Register */
+#define DMC0_PADCTL                 0xFFC800C0         /* DMC0 PAD Control Register 0 */
+
+#define DEVSZ_64                0x000         /* DMC External Bank Size = 64Mbit */
+#define DEVSZ_128               0x100         /* DMC External Bank Size = 128Mbit */
+#define DEVSZ_256               0x200         /* DMC External Bank Size = 256Mbit */
+#define DEVSZ_512               0x300         /* DMC External Bank Size = 512Mbit */
+#define DEVSZ_1G                0x400         /* DMC External Bank Size = 1Gbit */
+#define DEVSZ_2G                0x500         /* DMC External Bank Size = 2Gbit */
+
+/* =========================
+        L2CTL Registers
+   ========================= */
+
+/* =========================
+        L2CTL0
+   ========================= */
+#define L2CTL0_CTL                  0xFFCA3000         /* L2CTL0 L2 Control Register */
+#define L2CTL0_ACTL_C0              0xFFCA3004         /* L2CTL0 L2 Core 0 Access Control Register */
+#define L2CTL0_ACTL_C1              0xFFCA3008         /* L2CTL0 L2 Core 1 Access Control Register */
+#define L2CTL0_ACTL_SYS             0xFFCA300C         /* L2CTL0 L2 System Access Control Register */
+#define L2CTL0_STAT                 0xFFCA3010         /* L2CTL0 L2 Status Register */
+#define L2CTL0_RPCR                 0xFFCA3014         /* L2CTL0 L2 Read Priority Count Register */
+#define L2CTL0_WPCR                 0xFFCA3018         /* L2CTL0 L2 Write Priority Count Register */
+#define L2CTL0_RFA                  0xFFCA3024         /* L2CTL0 L2 Refresh Address Register */
+#define L2CTL0_ERRADDR0             0xFFCA3040         /* L2CTL0 L2 Bank 0 ECC Error Address Register */
+#define L2CTL0_ERRADDR1             0xFFCA3044         /* L2CTL0 L2 Bank 1 ECC Error Address Register */
+#define L2CTL0_ERRADDR2             0xFFCA3048         /* L2CTL0 L2 Bank 2 ECC Error Address Register */
+#define L2CTL0_ERRADDR3             0xFFCA304C         /* L2CTL0 L2 Bank 3 ECC Error Address Register */
+#define L2CTL0_ERRADDR4             0xFFCA3050         /* L2CTL0 L2 Bank 4 ECC Error Address Register */
+#define L2CTL0_ERRADDR5             0xFFCA3054         /* L2CTL0 L2 Bank 5 ECC Error Address Register */
+#define L2CTL0_ERRADDR6             0xFFCA3058         /* L2CTL0 L2 Bank 6 ECC Error Address Register */
+#define L2CTL0_ERRADDR7             0xFFCA305C         /* L2CTL0 L2 Bank 7 ECC Error Address Register */
+#define L2CTL0_ET0                  0xFFCA3080         /* L2CTL0 L2 AXI Error 0 Type Register */
+#define L2CTL0_EADDR0               0xFFCA3084         /* L2CTL0 L2 AXI Error 0 Address Register */
+#define L2CTL0_ET1                  0xFFCA3088         /* L2CTL0 L2 AXI Error 1 Type Register */
+#define L2CTL0_EADDR1               0xFFCA308C         /* L2CTL0 L2 AXI Error 1 Address Register */
+
+
+/* =========================
+        SEC Registers
+   ========================= */
+/* ------------------------------------------------------------------------------------------------------------------------
+       SEC Core Interface (SCI) Register Definitions
+   ------------------------------------------------------------------------------------------------------------------------ */
+
+#define SEC_SCI_BASE 0xFFCA4400
+#define SEC_SCI_OFF 0x40
+#define SEC_CCTL 0x0         /* SEC Core Control Register n */
+#define SEC_CSTAT 0x4         /* SEC Core Status Register n */
+#define SEC_CPND 0x8         /* SEC Core Pending IRQ Register n */
+#define SEC_CACT 0xC         /* SEC Core Active IRQ Register n */
+#define SEC_CPMSK 0x10         /* SEC Core IRQ Priority Mask Register n */
+#define SEC_CGMSK 0x14         /* SEC Core IRQ Group Mask Register n */
+#define SEC_CPLVL 0x18         /* SEC Core IRQ Priority Level Register n */
+#define SEC_CSID 0x1C         /* SEC Core IRQ Source ID Register n */
+
+#define bfin_read_SEC_SCI(n, reg) bfin_read32(SEC_SCI_BASE + (n) * SEC_SCI_OFF + reg)
+#define bfin_write_SEC_SCI(n, reg, val) \
+	bfin_write32(SEC_SCI_BASE + (n) * SEC_SCI_OFF + reg, val)
+
+/* ------------------------------------------------------------------------------------------------------------------------
+       SEC Fault Management Interface (SFI) Register Definitions
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_FCTL                   0xFFCA4010         /* SEC Fault Control Register */
+#define SEC_FSTAT                  0xFFCA4014         /* SEC Fault Status Register */
+#define SEC_FSID                   0xFFCA4018         /* SEC Fault Source ID Register */
+#define SEC_FEND                   0xFFCA401C         /* SEC Fault End Register */
+#define SEC_FDLY                   0xFFCA4020         /* SEC Fault Delay Register */
+#define SEC_FDLY_CUR               0xFFCA4024         /* SEC Fault Delay Current Register */
+#define SEC_FSRDLY                 0xFFCA4028         /* SEC Fault System Reset Delay Register */
+#define SEC_FSRDLY_CUR             0xFFCA402C         /* SEC Fault System Reset Delay Current Register */
+#define SEC_FCOPP                  0xFFCA4030         /* SEC Fault COP Period Register */
+#define SEC_FCOPP_CUR              0xFFCA4034         /* SEC Fault COP Period Current Register */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+       SEC Global Register Definitions
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_GCTL                   0xFFCA4000         /* SEC Global Control Register */
+#define SEC_GSTAT                  0xFFCA4004         /* SEC Global Status Register */
+#define SEC_RAISE                  0xFFCA4008         /* SEC Global Raise Register */
+#define SEC_END                    0xFFCA400C         /* SEC Global End Register */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+       SEC Source Interface (SSI) Register Definitions
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_SCTL0                  0xFFCA4800         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL1                  0xFFCA4808         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL2                  0xFFCA4810         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL3                  0xFFCA4818         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL4                  0xFFCA4820         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL5                  0xFFCA4828         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL6                  0xFFCA4830         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL7                  0xFFCA4838         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL8                  0xFFCA4840         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL9                  0xFFCA4848         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL10                 0xFFCA4850         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL11                 0xFFCA4858         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL12                 0xFFCA4860         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL13                 0xFFCA4868         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL14                 0xFFCA4870         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL15                 0xFFCA4878         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL16                 0xFFCA4880         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL17                 0xFFCA4888         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL18                 0xFFCA4890         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL19                 0xFFCA4898         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL20                 0xFFCA48A0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL21                 0xFFCA48A8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL22                 0xFFCA48B0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL23                 0xFFCA48B8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL24                 0xFFCA48C0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL25                 0xFFCA48C8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL26                 0xFFCA48D0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL27                 0xFFCA48D8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL28                 0xFFCA48E0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL29                 0xFFCA48E8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL30                 0xFFCA48F0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL31                 0xFFCA48F8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL32                 0xFFCA4900         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL33                 0xFFCA4908         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL34                 0xFFCA4910         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL35                 0xFFCA4918         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL36                 0xFFCA4920         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL37                 0xFFCA4928         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL38                 0xFFCA4930         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL39                 0xFFCA4938         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL40                 0xFFCA4940         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL41                 0xFFCA4948         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL42                 0xFFCA4950         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL43                 0xFFCA4958         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL44                 0xFFCA4960         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL45                 0xFFCA4968         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL46                 0xFFCA4970         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL47                 0xFFCA4978         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL48                 0xFFCA4980         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL49                 0xFFCA4988         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL50                 0xFFCA4990         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL51                 0xFFCA4998         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL52                 0xFFCA49A0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL53                 0xFFCA49A8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL54                 0xFFCA49B0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL55                 0xFFCA49B8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL56                 0xFFCA49C0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL57                 0xFFCA49C8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL58                 0xFFCA49D0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL59                 0xFFCA49D8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL60                 0xFFCA49E0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL61                 0xFFCA49E8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL62                 0xFFCA49F0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL63                 0xFFCA49F8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL64                 0xFFCA4A00         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL65                 0xFFCA4A08         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL66                 0xFFCA4A10         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL67                 0xFFCA4A18         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL68                 0xFFCA4A20         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL69                 0xFFCA4A28         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL70                 0xFFCA4A30         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL71                 0xFFCA4A38         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL72                 0xFFCA4A40         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL73                 0xFFCA4A48         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL74                 0xFFCA4A50         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL75                 0xFFCA4A58         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL76                 0xFFCA4A60         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL77                 0xFFCA4A68         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL78                 0xFFCA4A70         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL79                 0xFFCA4A78         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL80                 0xFFCA4A80         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL81                 0xFFCA4A88         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL82                 0xFFCA4A90         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL83                 0xFFCA4A98         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL84                 0xFFCA4AA0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL85                 0xFFCA4AA8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL86                 0xFFCA4AB0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL87                 0xFFCA4AB8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL88                 0xFFCA4AC0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL89                 0xFFCA4AC8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL90                 0xFFCA4AD0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL91                 0xFFCA4AD8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL92                 0xFFCA4AE0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL93                 0xFFCA4AE8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL94                 0xFFCA4AF0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL95                 0xFFCA4AF8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL96                 0xFFCA4B00         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL97                 0xFFCA4B08         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL98                 0xFFCA4B10         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL99                 0xFFCA4B18         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL100                0xFFCA4B20         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL101                0xFFCA4B28         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL102                0xFFCA4B30         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL103                0xFFCA4B38         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL104                0xFFCA4B40         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL105                0xFFCA4B48         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL106                0xFFCA4B50         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL107                0xFFCA4B58         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL108                0xFFCA4B60         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL109                0xFFCA4B68         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL110                0xFFCA4B70         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL111                0xFFCA4B78         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL112                0xFFCA4B80         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL113                0xFFCA4B88         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL114                0xFFCA4B90         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL115                0xFFCA4B98         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL116                0xFFCA4BA0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL117                0xFFCA4BA8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL118                0xFFCA4BB0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL119                0xFFCA4BB8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL120                0xFFCA4BC0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL121                0xFFCA4BC8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL122                0xFFCA4BD0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL123                0xFFCA4BD8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL124                0xFFCA4BE0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL125                0xFFCA4BE8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL126                0xFFCA4BF0         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL127                0xFFCA4BF8         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL128                0xFFCA4C00         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL129                0xFFCA4C08         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL130                0xFFCA4C10         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL131                0xFFCA4C18         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL132                0xFFCA4C20         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL133                0xFFCA4C28         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL134                0xFFCA4C30         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL135                0xFFCA4C38         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL136                0xFFCA4C40         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL137                0xFFCA4C48         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL138                0xFFCA4C50         /* SEC IRQ Source Control Register n */
+#define SEC_SCTL139                0xFFCA4C58         /* SEC IRQ Source Control Register n */
+#define SEC_SSTAT0                 0xFFCA4804         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT1                 0xFFCA480C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT2                 0xFFCA4814         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT3                 0xFFCA481C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT4                 0xFFCA4824         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT5                 0xFFCA482C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT6                 0xFFCA4834         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT7                 0xFFCA483C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT8                 0xFFCA4844         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT9                 0xFFCA484C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT10                0xFFCA4854         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT11                0xFFCA485C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT12                0xFFCA4864         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT13                0xFFCA486C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT14                0xFFCA4874         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT15                0xFFCA487C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT16                0xFFCA4884         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT17                0xFFCA488C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT18                0xFFCA4894         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT19                0xFFCA489C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT20                0xFFCA48A4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT21                0xFFCA48AC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT22                0xFFCA48B4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT23                0xFFCA48BC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT24                0xFFCA48C4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT25                0xFFCA48CC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT26                0xFFCA48D4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT27                0xFFCA48DC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT28                0xFFCA48E4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT29                0xFFCA48EC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT30                0xFFCA48F4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT31                0xFFCA48FC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT32                0xFFCA4904         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT33                0xFFCA490C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT34                0xFFCA4914         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT35                0xFFCA491C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT36                0xFFCA4924         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT37                0xFFCA492C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT38                0xFFCA4934         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT39                0xFFCA493C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT40                0xFFCA4944         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT41                0xFFCA494C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT42                0xFFCA4954         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT43                0xFFCA495C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT44                0xFFCA4964         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT45                0xFFCA496C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT46                0xFFCA4974         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT47                0xFFCA497C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT48                0xFFCA4984         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT49                0xFFCA498C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT50                0xFFCA4994         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT51                0xFFCA499C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT52                0xFFCA49A4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT53                0xFFCA49AC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT54                0xFFCA49B4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT55                0xFFCA49BC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT56                0xFFCA49C4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT57                0xFFCA49CC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT58                0xFFCA49D4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT59                0xFFCA49DC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT60                0xFFCA49E4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT61                0xFFCA49EC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT62                0xFFCA49F4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT63                0xFFCA49FC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT64                0xFFCA4A04         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT65                0xFFCA4A0C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT66                0xFFCA4A14         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT67                0xFFCA4A1C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT68                0xFFCA4A24         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT69                0xFFCA4A2C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT70                0xFFCA4A34         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT71                0xFFCA4A3C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT72                0xFFCA4A44         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT73                0xFFCA4A4C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT74                0xFFCA4A54         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT75                0xFFCA4A5C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT76                0xFFCA4A64         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT77                0xFFCA4A6C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT78                0xFFCA4A74         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT79                0xFFCA4A7C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT80                0xFFCA4A84         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT81                0xFFCA4A8C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT82                0xFFCA4A94         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT83                0xFFCA4A9C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT84                0xFFCA4AA4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT85                0xFFCA4AAC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT86                0xFFCA4AB4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT87                0xFFCA4ABC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT88                0xFFCA4AC4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT89                0xFFCA4ACC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT90                0xFFCA4AD4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT91                0xFFCA4ADC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT92                0xFFCA4AE4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT93                0xFFCA4AEC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT94                0xFFCA4AF4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT95                0xFFCA4AFC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT96                0xFFCA4B04         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT97                0xFFCA4B0C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT98                0xFFCA4B14         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT99                0xFFCA4B1C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT100               0xFFCA4B24         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT101               0xFFCA4B2C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT102               0xFFCA4B34         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT103               0xFFCA4B3C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT104               0xFFCA4B44         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT105               0xFFCA4B4C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT106               0xFFCA4B54         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT107               0xFFCA4B5C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT108               0xFFCA4B64         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT109               0xFFCA4B6C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT110               0xFFCA4B74         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT111               0xFFCA4B7C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT112               0xFFCA4B84         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT113               0xFFCA4B8C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT114               0xFFCA4B94         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT115               0xFFCA4B9C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT116               0xFFCA4BA4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT117               0xFFCA4BAC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT118               0xFFCA4BB4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT119               0xFFCA4BBC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT120               0xFFCA4BC4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT121               0xFFCA4BCC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT122               0xFFCA4BD4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT123               0xFFCA4BDC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT124               0xFFCA4BE4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT125               0xFFCA4BEC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT126               0xFFCA4BF4         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT127               0xFFCA4BFC         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT128               0xFFCA4C04         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT129               0xFFCA4C0C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT130               0xFFCA4C14         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT131               0xFFCA4C1C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT132               0xFFCA4C24         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT133               0xFFCA4C2C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT134               0xFFCA4C34         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT135               0xFFCA4C3C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT136               0xFFCA4C44         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT137               0xFFCA4C4C         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT138               0xFFCA4C54         /* SEC IRQ Source Status Register n */
+#define SEC_SSTAT139               0xFFCA4C5C         /* SEC IRQ Source Status Register n */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_CCTL                             Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_CCTL_LOCK                   0x80000000    /* LOCK: Lock */
+#define SEC_CCTL_NMI_EN                 0x00010000    /* NMIEN: Enable */
+#define SEC_CCTL_WAITIDLE               0x00001000    /* WFI: Wait for Idle */
+#define SEC_CCTL_RESET                  0x00000002    /* RESET: Reset */
+#define SEC_CCTL_EN                     0x00000001    /* EN: Enable */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_CSTAT                            Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_CSTAT_NMI                   0x00010000    /* NMI Status */
+#define SEC_CSTAT_WAITING               0x00001000    /* WFI: Waiting */
+#define SEC_CSTAT_VALID_SID             0x00000400    /* SIDV: Valid */
+#define SEC_CSTAT_VALID_ACT             0x00000200    /* ACTV: Valid */
+#define SEC_CSTAT_VALID_PND             0x00000100    /* PNDV: Valid */
+#define SEC_CSTAT_ERRC                  0x00000030    /* Error Cause */
+#define SEC_CSTAT_ACKERR                0x00000010    /* ERRC: Acknowledge Error */
+#define SEC_CSTAT_ERR                   0x00000002    /* ERR: Error Occurred */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_CPND                             Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_CPND_PRIO                   0x0000FF00    /* Highest Pending IRQ Priority */
+#define SEC_CPND_SID                    0x000000FF    /* Highest Pending IRQ Source ID */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_CACT                             Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_CACT_PRIO                   0x0000FF00    /* Highest Active IRQ Priority */
+#define SEC_CACT_SID                    0x000000FF    /* Highest Active IRQ Source ID */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_CPMSK                            Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_CPMSK_LOCK                  0x80000000    /* LOCK: Lock */
+#define SEC_CPMSK_PRIO                  0x000000FF    /* IRQ Priority Mask */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_CGMSK                            Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_CGMSK_LOCK                  0x80000000    /* LOCK: Lock */
+#define SEC_CGMSK_MASK                  0x00000100    /* UGRP: Mask Ungrouped Sources */
+#define SEC_CGMSK_GRP                   0x0000000F    /* Grouped Mask */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_CPLVL                            Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_CPLVL_LOCK                  0x80000000    /* LOCK: Lock */
+#define SEC_CPLVL_PLVL                  0x00000007    /* Priority Levels */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_CSID                             Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_CSID_SID                    0x000000FF    /* Source ID */
+
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_FCTL                             Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_FCTL_LOCK                   0x80000000    /* LOCK: Lock */
+#define SEC_FCTL_FLTPND_MODE            0x00002000    /* TES: Fault Pending Mode */
+#define SEC_FCTL_COP_MODE               0x00001000    /* CMS: COP Mode */
+#define SEC_FCTL_FLTIN_EN               0x00000080    /* FIEN: Enable */
+#define SEC_FCTL_SYSRST_EN              0x00000040    /* SREN: Enable */
+#define SEC_FCTL_TRGOUT_EN              0x00000020    /* TOEN: Enable */
+#define SEC_FCTL_FLTOUT_EN              0x00000010    /* FOEN: Enable */
+#define SEC_FCTL_RESET                  0x00000002    /* RESET: Reset */
+#define SEC_FCTL_EN                     0x00000001    /* EN: Enable */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_FSTAT                            Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_FSTAT_NXTFLT                0x00000400    /* NPND: Pending */
+#define SEC_FSTAT_FLTACT                0x00000200    /* ACT: Active Fault */
+#define SEC_FSTAT_FLTPND                0x00000100    /* PND: Pending */
+#define SEC_FSTAT_ERRC                  0x00000030    /* Error Cause */
+#define SEC_FSTAT_ENDERR                0x00000020    /* ERRC: End Error */
+#define SEC_FSTAT_ERR                   0x00000002    /* ERR: Error Occurred */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_FSID                             Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_FSID_SRC_EXTFLT             0x00010000    /* FEXT: Fault External */
+#define SEC_FSID_SID                    0x000000FF    /* Source ID */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_FEND                             Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_FEND_END_EXTFLT             0x00010000    /* FEXT: Fault External */
+#define SEC_FEND_SID                    0x000000FF    /* Source ID */
+
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_GCTL                             Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_GCTL_LOCK                   0x80000000    /* Lock */
+#define SEC_GCTL_RESET                  0x00000002    /* Reset */
+#define SEC_GCTL_EN                     0x00000001    /* Enable */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_GSTAT                            Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_GSTAT_LWERR                 0x80000000    /* LWERR: Error Occurred */
+#define SEC_GSTAT_ADRERR                0x40000000    /* ADRERR: Error Occurred */
+#define SEC_GSTAT_SID                   0x00FF0000    /* Source ID for SSI Error */
+#define SEC_GSTAT_SCI                   0x00000F00    /* SCI ID for SCI Error */
+#define SEC_GSTAT_ERRC                  0x00000030    /* Error Cause */
+#define SEC_GSTAT_SCIERR                0x00000010    /* ERRC: SCI Error */
+#define SEC_GSTAT_SSIERR                0x00000020    /* ERRC: SSI Error */
+#define SEC_GSTAT_ERR                   0x00000002    /* ERR: Error Occurred */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_RAISE                            Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_RAISE_SID                   0x000000FF    /* Source ID IRQ Set to Pending */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_END                              Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_END_SID                     0x000000FF    /* Source ID IRQ to End */
+
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_SCTL                             Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_SCTL_LOCK                   0x80000000    /* Lock */
+#define SEC_SCTL_CTG                    0x0F000000    /* Core Target Select */
+#define SEC_SCTL_GRP                    0x000F0000    /* Group Select */
+#define SEC_SCTL_PRIO                   0x0000FF00    /* Priority Level Select */
+#define SEC_SCTL_ERR_EN                 0x00000010    /* ERREN: Enable */
+#define SEC_SCTL_EDGE                   0x00000008    /* ES: Edge Sensitive */
+#define SEC_SCTL_SRC_EN                 0x00000004    /* SEN: Enable */
+#define SEC_SCTL_FAULT_EN               0x00000002    /* FEN: Enable */
+#define SEC_SCTL_INT_EN                 0x00000001    /* IEN: Enable */
+
+/* ------------------------------------------------------------------------------------------------------------------------
+        SEC_SSTAT                            Pos/Masks     Description
+   ------------------------------------------------------------------------------------------------------------------------ */
+#define SEC_SSTAT_CHID                  0x00FF0000    /* Channel ID */
+#define SEC_SSTAT_ACTIVE_SRC            0x00000200    /* ACT: Active Source */
+#define SEC_SSTAT_PENDING               0x00000100    /* PND: Pending */
+#define SEC_SSTAT_ERRC                  0x00000030    /* Error Cause */
+#define SEC_SSTAT_ENDERR                0x00000020    /* ERRC: End Error */
+#define SEC_SSTAT_ERR                   0x00000002    /* Error */
+
+
+/* =========================
+        RCU Registers
+   ========================= */
+
+/* =========================
+        RCU0
+   ========================= */
+#define RCU0_CTL                    0xFFCA6000         /* RCU0 Control Register */
+#define RCU0_STAT                   0xFFCA6004         /* RCU0 Status Register */
+#define RCU0_CRCTL                  0xFFCA6008         /* RCU0 Core Reset Control Register */
+#define RCU0_CRSTAT                 0xFFCA600C         /* RCU0 Core Reset Status Register */
+#define RCU0_SIDIS                  0xFFCA6010         /* RCU0 System Interface Disable Register */
+#define RCU0_SISTAT                 0xFFCA6014         /* RCU0 System Interface Status Register */
+#define RCU0_SVECT_LCK              0xFFCA6018         /* RCU0 SVECT Lock Register */
+#define RCU0_BCODE                  0xFFCA601C         /* RCU0 Boot Code Register */
+#define RCU0_SVECT0                 0xFFCA6020         /* RCU0 Software Vector Register n */
+#define RCU0_SVECT1                 0xFFCA6024         /* RCU0 Software Vector Register n */
+
+
+/* =========================
+        CGU0
+   ========================= */
+#define CGU0_CTL                    0xFFCA8000         /* CGU0 Control Register */
+#define CGU0_STAT                   0xFFCA8004         /* CGU0 Status Register */
+#define CGU0_DIV                    0xFFCA8008         /* CGU0 Divisor Register */
+#define CGU0_CLKOUTSEL              0xFFCA800C         /* CGU0 CLKOUT Select Register */
+
+
+/* =========================
+        DPM Registers
+   ========================= */
+
+/* =========================
+        DPM0
+   ========================= */
+#define DPM0_CTL                    0xFFCA9000         /* DPM0 Control Register */
+#define DPM0_STAT                   0xFFCA9004         /* DPM0 Status Register */
+#define DPM0_CCBF_DIS               0xFFCA9008         /* DPM0 Core Clock Buffer Disable Register */
+#define DPM0_CCBF_EN                0xFFCA900C         /* DPM0 Core Clock Buffer Enable Register */
+#define DPM0_CCBF_STAT              0xFFCA9010         /* DPM0 Core Clock Buffer Status Register */
+#define DPM0_CCBF_STAT_STKY         0xFFCA9014         /* DPM0 Core Clock Buffer Status Sticky Register */
+#define DPM0_SCBF_DIS               0xFFCA9018         /* DPM0 System Clock Buffer Disable Register */
+#define DPM0_WAKE_EN                0xFFCA901C         /* DPM0 Wakeup Enable Register */
+#define DPM0_WAKE_POL               0xFFCA9020         /* DPM0 Wakeup Polarity Register */
+#define DPM0_WAKE_STAT              0xFFCA9024         /* DPM0 Wakeup Status Register */
+#define DPM0_HIB_DIS                0xFFCA9028         /* DPM0 Hibernate Disable Register */
+#define DPM0_PGCNTR                 0xFFCA902C         /* DPM0 Power Good Counter Register */
+#define DPM0_RESTORE0               0xFFCA9030         /* DPM0 Restore Register */
+#define DPM0_RESTORE1               0xFFCA9034         /* DPM0 Restore Register */
+#define DPM0_RESTORE2               0xFFCA9038         /* DPM0 Restore Register */
+#define DPM0_RESTORE3               0xFFCA903C         /* DPM0 Restore Register */
+#define DPM0_RESTORE4               0xFFCA9040         /* DPM0 Restore Register */
+#define DPM0_RESTORE5               0xFFCA9044         /* DPM0 Restore Register */
+#define DPM0_RESTORE6               0xFFCA9048         /* DPM0 Restore Register */
+#define DPM0_RESTORE7               0xFFCA904C         /* DPM0 Restore Register */
+#define DPM0_RESTORE8               0xFFCA9050         /* DPM0 Restore Register */
+#define DPM0_RESTORE9               0xFFCA9054         /* DPM0 Restore Register */
+#define DPM0_RESTORE10              0xFFCA9058         /* DPM0 Restore Register */
+#define DPM0_RESTORE11              0xFFCA905C         /* DPM0 Restore Register */
+#define DPM0_RESTORE12              0xFFCA9060         /* DPM0 Restore Register */
+#define DPM0_RESTORE13              0xFFCA9064         /* DPM0 Restore Register */
+#define DPM0_RESTORE14              0xFFCA9068         /* DPM0 Restore Register */
+#define DPM0_RESTORE15              0xFFCA906C         /* DPM0 Restore Register */
+
+
+/* =========================
+        DBG Registers
+   ========================= */
+
+/* USB register */
+#define USB_FADDR                  0xFFCC1000         /* USB Device Address in Peripheral Mode */
+#define USB_POWER                  0xFFCC1001         /* USB Power and Device Control */
+#define USB_INTRTX                 0xFFCC1002         /* USB Transmit Interrupt */
+#define USB_INTRRX                 0xFFCC1004         /* USB Receive Interrupts */
+#define USB_INTRTXE                0xFFCC1006         /* USB Transmit Interrupt Enable */
+#define USB_INTRRXE                0xFFCC1008         /* USB Receive Interrupt Enable */
+#define USB_INTRUSB                    0xFFCC100A         /* USB USB Interrupts */
+#define USB_INTRUSBE                    0xFFCC100B         /* USB USB Interrupt Enable */
+#define USB_FRAME                  0xFFCC100C         /* USB Frame Number */
+#define USB_INDEX                  0xFFCC100E         /* USB Index */
+#define USB_TESTMODE               0xFFCC100F         /* USB Testmodes */
+#define USB_EPI_TXMAXP0            0xFFCC1010         /* USB Transmit Maximum Packet Length */
+#define USB_EP_NI0_TXMAXP          0xFFCC1010
+#define USB_EP0I_CSR0_H            0xFFCC1012         /* USB Config and Status EP0 */
+#define USB_EPI_TXCSR0_H           0xFFCC1012         /* USB Transmit Configuration and Status */
+#define USB_EP0I_CSR0_P            0xFFCC1012         /* USB Config and Status EP0 */
+#define USB_EPI_TXCSR0_P           0xFFCC1012         /* USB Transmit Configuration and Status */
+#define USB_EPI_RXMAXP0            0xFFCC1014         /* USB Receive Maximum Packet Length */
+#define USB_EPI_RXCSR0_H           0xFFCC1016         /* USB Receive Configuration and Status Register */
+#define USB_EPI_RXCSR0_P           0xFFCC1016         /* USB Receive Configuration and Status Register */
+#define USB_EP0I_CNT0              0xFFCC1018         /* USB Number of Received Bytes for Endpoint 0 */
+#define USB_EPI_RXCNT0             0xFFCC1018         /* USB Number of Byte Received */
+#define USB_EP0I_TYPE0             0xFFCC101A         /* USB Speed for Endpoint 0 */
+#define USB_EPI_TXTYPE0            0xFFCC101A         /* USB Transmit Type */
+#define USB_EP0I_NAKLIMIT0         0xFFCC101B         /* USB NAK Response Timeout for Endpoint 0 */
+#define USB_EPI_TXINTERVAL0        0xFFCC101B         /* USB Transmit Polling Interval */
+#define USB_EPI_RXTYPE0            0xFFCC101C         /* USB Receive Type */
+#define USB_EPI_RXINTERVAL0        0xFFCC101D         /* USB Receive Polling Interval */
+#define USB_EP0I_CFGDATA0          0xFFCC101F         /* USB Configuration Information */
+#define USB_FIFOB0                 0xFFCC1020         /* USB FIFO Data */
+#define USB_FIFOB1                 0xFFCC1024         /* USB FIFO Data */
+#define USB_FIFOB2                 0xFFCC1028         /* USB FIFO Data */
+#define USB_FIFOB3                 0xFFCC102C         /* USB FIFO Data */
+#define USB_FIFOB4                 0xFFCC1030         /* USB FIFO Data */
+#define USB_FIFOB5                 0xFFCC1034         /* USB FIFO Data */
+#define USB_FIFOB6                 0xFFCC1038         /* USB FIFO Data */
+#define USB_FIFOB7                 0xFFCC103C         /* USB FIFO Data */
+#define USB_FIFOB8                 0xFFCC1040         /* USB FIFO Data */
+#define USB_FIFOB9                 0xFFCC1044         /* USB FIFO Data */
+#define USB_FIFOB10                0xFFCC1048         /* USB FIFO Data */
+#define USB_FIFOB11                0xFFCC104C         /* USB FIFO Data */
+#define USB_FIFOH0                 0xFFCC1020         /* USB FIFO Data */
+#define USB_FIFOH1                 0xFFCC1024         /* USB FIFO Data */
+#define USB_FIFOH2                 0xFFCC1028         /* USB FIFO Data */
+#define USB_FIFOH3                 0xFFCC102C         /* USB FIFO Data */
+#define USB_FIFOH4                 0xFFCC1030         /* USB FIFO Data */
+#define USB_FIFOH5                 0xFFCC1034         /* USB FIFO Data */
+#define USB_FIFOH6                 0xFFCC1038         /* USB FIFO Data */
+#define USB_FIFOH7                 0xFFCC103C         /* USB FIFO Data */
+#define USB_FIFOH8                 0xFFCC1040         /* USB FIFO Data */
+#define USB_FIFOH9                 0xFFCC1044         /* USB FIFO Data */
+#define USB_FIFOH10                0xFFCC1048         /* USB FIFO Data */
+#define USB_FIFOH11                0xFFCC104C         /* USB FIFO Data */
+#define USB_FIFO0                  0xFFCC1020         /* USB FIFO Data */
+#define USB_EP0_FIFO               0xFFCC1020
+#define USB_FIFO1                  0xFFCC1024         /* USB FIFO Data */
+#define USB_FIFO2                  0xFFCC1028         /* USB FIFO Data */
+#define USB_FIFO3                  0xFFCC102C         /* USB FIFO Data */
+#define USB_FIFO4                  0xFFCC1030         /* USB FIFO Data */
+#define USB_FIFO5                  0xFFCC1034         /* USB FIFO Data */
+#define USB_FIFO6                  0xFFCC1038         /* USB FIFO Data */
+#define USB_FIFO7                  0xFFCC103C         /* USB FIFO Data */
+#define USB_FIFO8                  0xFFCC1040         /* USB FIFO Data */
+#define USB_FIFO9                  0xFFCC1044         /* USB FIFO Data */
+#define USB_FIFO10                 0xFFCC1048         /* USB FIFO Data */
+#define USB_FIFO11                 0xFFCC104C         /* USB FIFO Data */
+#define USB_OTG_DEV_CTL                0xFFCC1060         /* USB Device Control */
+#define USB_TXFIFOSZ               0xFFCC1062         /* USB Transmit FIFO Size */
+#define USB_RXFIFOSZ               0xFFCC1063         /* USB Receive FIFO Size */
+#define USB_TXFIFOADDR             0xFFCC1064         /* USB Transmit FIFO Address */
+#define USB_RXFIFOADDR             0xFFCC1066         /* USB Receive FIFO Address */
+#define USB_VENDSTAT               0xFFCC1068         /* USB Vendor Status */
+#define USB_HWVERS                 0xFFCC106C         /* USB Hardware Version */
+#define USB_EPINFO                 0xFFCC1078         /* USB Endpoint Info */
+#define USB_RAMINFO                0xFFCC1079         /* USB Ram Information */
+#define USB_LINKINFO               0xFFCC107A         /* USB Programmable Delay Values */
+#define USB_VPLEN                  0xFFCC107B         /* USB VBus Pulse Duration */
+#define USB_HS_EOF1                0xFFCC107C         /* USB High Speed End of Frame Remaining */
+#define USB_FS_EOF1                0xFFCC107D         /* USB Full Speed End of Frame Remaining */
+#define USB_LS_EOF1                0xFFCC107E         /* USB Low Speed End of Frame Remaining */
+#define USB_SOFT_RST               0xFFCC107F         /* USB Software Reset */
+#define USB_TXFUNCADDR0            0xFFCC1080         /* USB Transmit Function Address */
+#define USB_TXFUNCADDR1            0xFFCC1088         /* USB Transmit Function Address */
+#define USB_TXFUNCADDR2            0xFFCC1090         /* USB Transmit Function Address */
+#define USB_TXFUNCADDR3            0xFFCC1098         /* USB Transmit Function Address */
+#define USB_TXFUNCADDR4            0xFFCC10A0         /* USB Transmit Function Address */
+#define USB_TXFUNCADDR5            0xFFCC10A8         /* USB Transmit Function Address */
+#define USB_TXFUNCADDR6            0xFFCC10B0         /* USB Transmit Function Address */
+#define USB_TXFUNCADDR7            0xFFCC10B8         /* USB Transmit Function Address */
+#define USB_TXFUNCADDR8            0xFFCC10C0         /* USB Transmit Function Address */
+#define USB_TXFUNCADDR9            0xFFCC10C8         /* USB Transmit Function Address */
+#define USB_TXFUNCADDR10           0xFFCC10D0         /* USB Transmit Function Address */
+#define USB_TXFUNCADDR11           0xFFCC10D8         /* USB Transmit Function Address */
+#define USB_TXHUBADDR0             0xFFCC1082         /* USB Transmit Hub Address */
+#define USB_TXHUBADDR1             0xFFCC108A         /* USB Transmit Hub Address */
+#define USB_TXHUBADDR2             0xFFCC1092         /* USB Transmit Hub Address */
+#define USB_TXHUBADDR3             0xFFCC109A         /* USB Transmit Hub Address */
+#define USB_TXHUBADDR4             0xFFCC10A2         /* USB Transmit Hub Address */
+#define USB_TXHUBADDR5             0xFFCC10AA         /* USB Transmit Hub Address */
+#define USB_TXHUBADDR6             0xFFCC10B2         /* USB Transmit Hub Address */
+#define USB_TXHUBADDR7             0xFFCC10BA         /* USB Transmit Hub Address */
+#define USB_TXHUBADDR8             0xFFCC10C2         /* USB Transmit Hub Address */
+#define USB_TXHUBADDR9             0xFFCC10CA         /* USB Transmit Hub Address */
+#define USB_TXHUBADDR10            0xFFCC10D2         /* USB Transmit Hub Address */
+#define USB_TXHUBADDR11            0xFFCC10DA         /* USB Transmit Hub Address */
+#define USB_TXHUBPORT0             0xFFCC1083         /* USB Transmit Hub Port */
+#define USB_TXHUBPORT1             0xFFCC108B         /* USB Transmit Hub Port */
+#define USB_TXHUBPORT2             0xFFCC1093         /* USB Transmit Hub Port */
+#define USB_TXHUBPORT3             0xFFCC109B         /* USB Transmit Hub Port */
+#define USB_TXHUBPORT4             0xFFCC10A3         /* USB Transmit Hub Port */
+#define USB_TXHUBPORT5             0xFFCC10AB         /* USB Transmit Hub Port */
+#define USB_TXHUBPORT6             0xFFCC10B3         /* USB Transmit Hub Port */
+#define USB_TXHUBPORT7             0xFFCC10BB         /* USB Transmit Hub Port */
+#define USB_TXHUBPORT8             0xFFCC10C3         /* USB Transmit Hub Port */
+#define USB_TXHUBPORT9             0xFFCC10CB         /* USB Transmit Hub Port */
+#define USB_TXHUBPORT10            0xFFCC10D3         /* USB Transmit Hub Port */
+#define USB_TXHUBPORT11            0xFFCC10DB         /* USB Transmit Hub Port */
+#define USB_RXFUNCADDR0            0xFFCC1084         /* USB Receive Function Address */
+#define USB_RXFUNCADDR1            0xFFCC108C         /* USB Receive Function Address */
+#define USB_RXFUNCADDR2            0xFFCC1094         /* USB Receive Function Address */
+#define USB_RXFUNCADDR3            0xFFCC109C         /* USB Receive Function Address */
+#define USB_RXFUNCADDR4            0xFFCC10A4         /* USB Receive Function Address */
+#define USB_RXFUNCADDR5            0xFFCC10AC         /* USB Receive Function Address */
+#define USB_RXFUNCADDR6            0xFFCC10B4         /* USB Receive Function Address */
+#define USB_RXFUNCADDR7            0xFFCC10BC         /* USB Receive Function Address */
+#define USB_RXFUNCADDR8            0xFFCC10C4         /* USB Receive Function Address */
+#define USB_RXFUNCADDR9            0xFFCC10CC         /* USB Receive Function Address */
+#define USB_RXFUNCADDR10           0xFFCC10D4         /* USB Receive Function Address */
+#define USB_RXFUNCADDR11           0xFFCC10DC         /* USB Receive Function Address */
+#define USB_RXHUBADDR0             0xFFCC1086         /* USB Receive Hub Address */
+#define USB_RXHUBADDR1             0xFFCC108E         /* USB Receive Hub Address */
+#define USB_RXHUBADDR2             0xFFCC1096         /* USB Receive Hub Address */
+#define USB_RXHUBADDR3             0xFFCC109E         /* USB Receive Hub Address */
+#define USB_RXHUBADDR4             0xFFCC10A6         /* USB Receive Hub Address */
+#define USB_RXHUBADDR5             0xFFCC10AE         /* USB Receive Hub Address */
+#define USB_RXHUBADDR6             0xFFCC10B6         /* USB Receive Hub Address */
+#define USB_RXHUBADDR7             0xFFCC10BE         /* USB Receive Hub Address */
+#define USB_RXHUBADDR8             0xFFCC10C6         /* USB Receive Hub Address */
+#define USB_RXHUBADDR9             0xFFCC10CE         /* USB Receive Hub Address */
+#define USB_RXHUBADDR10            0xFFCC10D6         /* USB Receive Hub Address */
+#define USB_RXHUBADDR11            0xFFCC10DE         /* USB Receive Hub Address */
+#define USB_RXHUBPORT0             0xFFCC1087         /* USB Receive Hub Port */
+#define USB_RXHUBPORT1             0xFFCC108F         /* USB Receive Hub Port */
+#define USB_RXHUBPORT2             0xFFCC1097         /* USB Receive Hub Port */
+#define USB_RXHUBPORT3             0xFFCC109F         /* USB Receive Hub Port */
+#define USB_RXHUBPORT4             0xFFCC10A7         /* USB Receive Hub Port */
+#define USB_RXHUBPORT5             0xFFCC10AF         /* USB Receive Hub Port */
+#define USB_RXHUBPORT6             0xFFCC10B7         /* USB Receive Hub Port */
+#define USB_RXHUBPORT7             0xFFCC10BF         /* USB Receive Hub Port */
+#define USB_RXHUBPORT8             0xFFCC10C7         /* USB Receive Hub Port */
+#define USB_RXHUBPORT9             0xFFCC10CF         /* USB Receive Hub Port */
+#define USB_RXHUBPORT10            0xFFCC10D7         /* USB Receive Hub Port */
+#define USB_RXHUBPORT11            0xFFCC10DF         /* USB Receive Hub Port */
+#define USB_EP0_CSR0_H             0xFFCC1102         /* USB Config and Status EP0 */
+#define USB_EP0_CSR0_P             0xFFCC1102         /* USB Config and Status EP0 */
+#define USB_EP0_CNT0               0xFFCC1108         /* USB Number of Received Bytes for Endpoint 0 */
+#define USB_EP0_TYPE0              0xFFCC110A         /* USB Speed for Endpoint 0 */
+#define USB_EP0_NAKLIMIT0          0xFFCC110B         /* USB NAK Response Timeout for Endpoint 0 */
+#define USB_EP0_CFGDATA0           0xFFCC110F         /* USB Configuration Information */
+#define USB_EP_TXMAXP0             0xFFCC1110         /* USB Transmit Maximum Packet Length */
+#define USB_EP_TXMAXP1             0xFFCC1120         /* USB Transmit Maximum Packet Length */
+#define USB_EP_TXMAXP2             0xFFCC1130         /* USB Transmit Maximum Packet Length */
+#define USB_EP_TXMAXP3             0xFFCC1140         /* USB Transmit Maximum Packet Length */
+#define USB_EP_TXMAXP4             0xFFCC1150         /* USB Transmit Maximum Packet Length */
+#define USB_EP_TXMAXP5             0xFFCC1160         /* USB Transmit Maximum Packet Length */
+#define USB_EP_TXMAXP6             0xFFCC1170         /* USB Transmit Maximum Packet Length */
+#define USB_EP_TXMAXP7             0xFFCC1180         /* USB Transmit Maximum Packet Length */
+#define USB_EP_TXMAXP8             0xFFCC1190         /* USB Transmit Maximum Packet Length */
+#define USB_EP_TXMAXP9             0xFFCC11A0         /* USB Transmit Maximum Packet Length */
+#define USB_EP_TXMAXP10            0xFFCC11B0         /* USB Transmit Maximum Packet Length */
+#define USB_EP_TXCSR0_H            0xFFCC1112         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR1_H            0xFFCC1122         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR2_H            0xFFCC1132         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR3_H            0xFFCC1142         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR4_H            0xFFCC1152         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR5_H            0xFFCC1162         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR6_H            0xFFCC1172         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR7_H            0xFFCC1182         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR8_H            0xFFCC1192         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR9_H            0xFFCC11A2         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR10_H           0xFFCC11B2         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR0_P            0xFFCC1112         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR1_P            0xFFCC1122         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR2_P            0xFFCC1132         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR3_P            0xFFCC1142         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR4_P            0xFFCC1152         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR5_P            0xFFCC1162         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR6_P            0xFFCC1172         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR7_P            0xFFCC1182         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR8_P            0xFFCC1192         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR9_P            0xFFCC11A2         /* USB Transmit Configuration and Status */
+#define USB_EP_TXCSR10_P           0xFFCC11B2         /* USB Transmit Configuration and Status */
+#define USB_EP_RXMAXP0             0xFFCC1114         /* USB Receive Maximum Packet Length */
+#define USB_EP_RXMAXP1             0xFFCC1124         /* USB Receive Maximum Packet Length */
+#define USB_EP_RXMAXP2             0xFFCC1134         /* USB Receive Maximum Packet Length */
+#define USB_EP_RXMAXP3             0xFFCC1144         /* USB Receive Maximum Packet Length */
+#define USB_EP_RXMAXP4             0xFFCC1154         /* USB Receive Maximum Packet Length */
+#define USB_EP_RXMAXP5             0xFFCC1164         /* USB Receive Maximum Packet Length */
+#define USB_EP_RXMAXP6             0xFFCC1174         /* USB Receive Maximum Packet Length */
+#define USB_EP_RXMAXP7             0xFFCC1184         /* USB Receive Maximum Packet Length */
+#define USB_EP_RXMAXP8             0xFFCC1194         /* USB Receive Maximum Packet Length */
+#define USB_EP_RXMAXP9             0xFFCC11A4         /* USB Receive Maximum Packet Length */
+#define USB_EP_RXMAXP10            0xFFCC11B4         /* USB Receive Maximum Packet Length */
+#define USB_EP_RXCSR0_H            0xFFCC1116         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR1_H            0xFFCC1126         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR2_H            0xFFCC1136         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR3_H            0xFFCC1146         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR4_H            0xFFCC1156         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR5_H            0xFFCC1166         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR6_H            0xFFCC1176         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR7_H            0xFFCC1186         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR8_H            0xFFCC1196         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR9_H            0xFFCC11A6         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR10_H           0xFFCC11B6         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR0_P            0xFFCC1116         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR1_P            0xFFCC1126         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR2_P            0xFFCC1136         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR3_P            0xFFCC1146         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR4_P            0xFFCC1156         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR5_P            0xFFCC1166         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR6_P            0xFFCC1176         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR7_P            0xFFCC1186         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR8_P            0xFFCC1196         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR9_P            0xFFCC11A6         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCSR10_P           0xFFCC11B6         /* USB Receive Configuration and Status Register */
+#define USB_EP_RXCNT0              0xFFCC1118         /* USB Number of Byte Received */
+#define USB_EP_RXCNT1              0xFFCC1128         /* USB Number of Byte Received */
+#define USB_EP_RXCNT2              0xFFCC1138         /* USB Number of Byte Received */
+#define USB_EP_RXCNT3              0xFFCC1148         /* USB Number of Byte Received */
+#define USB_EP_RXCNT4              0xFFCC1158         /* USB Number of Byte Received */
+#define USB_EP_RXCNT5              0xFFCC1168         /* USB Number of Byte Received */
+#define USB_EP_RXCNT6              0xFFCC1178         /* USB Number of Byte Received */
+#define USB_EP_RXCNT7              0xFFCC1188         /* USB Number of Byte Received */
+#define USB_EP_RXCNT8              0xFFCC1198         /* USB Number of Byte Received */
+#define USB_EP_RXCNT9              0xFFCC11A8         /* USB Number of Byte Received */
+#define USB_EP_RXCNT10             0xFFCC11B8         /* USB Number of Byte Received */
+#define USB_EP_TXTYPE0             0xFFCC111A         /* USB Transmit Type */
+#define USB_EP_TXTYPE1             0xFFCC112A         /* USB Transmit Type */
+#define USB_EP_TXTYPE2             0xFFCC113A         /* USB Transmit Type */
+#define USB_EP_TXTYPE3             0xFFCC114A         /* USB Transmit Type */
+#define USB_EP_TXTYPE4             0xFFCC115A         /* USB Transmit Type */
+#define USB_EP_TXTYPE5             0xFFCC116A         /* USB Transmit Type */
+#define USB_EP_TXTYPE6             0xFFCC117A         /* USB Transmit Type */
+#define USB_EP_TXTYPE7             0xFFCC118A         /* USB Transmit Type */
+#define USB_EP_TXTYPE8             0xFFCC119A         /* USB Transmit Type */
+#define USB_EP_TXTYPE9             0xFFCC11AA         /* USB Transmit Type */
+#define USB_EP_TXTYPE10            0xFFCC11BA         /* USB Transmit Type */
+#define USB_EP_TXINTERVAL0         0xFFCC111B         /* USB Transmit Polling Interval */
+#define USB_EP_TXINTERVAL1         0xFFCC112B         /* USB Transmit Polling Interval */
+#define USB_EP_TXINTERVAL2         0xFFCC113B         /* USB Transmit Polling Interval */
+#define USB_EP_TXINTERVAL3         0xFFCC114B         /* USB Transmit Polling Interval */
+#define USB_EP_TXINTERVAL4         0xFFCC115B         /* USB Transmit Polling Interval */
+#define USB_EP_TXINTERVAL5         0xFFCC116B         /* USB Transmit Polling Interval */
+#define USB_EP_TXINTERVAL6         0xFFCC117B         /* USB Transmit Polling Interval */
+#define USB_EP_TXINTERVAL7         0xFFCC118B         /* USB Transmit Polling Interval */
+#define USB_EP_TXINTERVAL8         0xFFCC119B         /* USB Transmit Polling Interval */
+#define USB_EP_TXINTERVAL9         0xFFCC11AB         /* USB Transmit Polling Interval */
+#define USB_EP_TXINTERVAL10        0xFFCC11BB         /* USB Transmit Polling Interval */
+#define USB_EP_RXTYPE0             0xFFCC111C         /* USB Receive Type */
+#define USB_EP_RXTYPE1             0xFFCC112C         /* USB Receive Type */
+#define USB_EP_RXTYPE2             0xFFCC113C         /* USB Receive Type */
+#define USB_EP_RXTYPE3             0xFFCC114C         /* USB Receive Type */
+#define USB_EP_RXTYPE4             0xFFCC115C         /* USB Receive Type */
+#define USB_EP_RXTYPE5             0xFFCC116C         /* USB Receive Type */
+#define USB_EP_RXTYPE6             0xFFCC117C         /* USB Receive Type */
+#define USB_EP_RXTYPE7             0xFFCC118C         /* USB Receive Type */
+#define USB_EP_RXTYPE8             0xFFCC119C         /* USB Receive Type */
+#define USB_EP_RXTYPE9             0xFFCC11AC         /* USB Receive Type */
+#define USB_EP_RXTYPE10            0xFFCC11BC         /* USB Receive Type */
+#define USB_EP_RXINTERVAL0         0xFFCC111D         /* USB Receive Polling Interval */
+#define USB_EP_RXINTERVAL1         0xFFCC112D         /* USB Receive Polling Interval */
+#define USB_EP_RXINTERVAL2         0xFFCC113D         /* USB Receive Polling Interval */
+#define USB_EP_RXINTERVAL3         0xFFCC114D         /* USB Receive Polling Interval */
+#define USB_EP_RXINTERVAL4         0xFFCC115D         /* USB Receive Polling Interval */
+#define USB_EP_RXINTERVAL5         0xFFCC116D         /* USB Receive Polling Interval */
+#define USB_EP_RXINTERVAL6         0xFFCC117D         /* USB Receive Polling Interval */
+#define USB_EP_RXINTERVAL7         0xFFCC118D         /* USB Receive Polling Interval */
+#define USB_EP_RXINTERVAL8         0xFFCC119D         /* USB Receive Polling Interval */
+#define USB_EP_RXINTERVAL9         0xFFCC11AD         /* USB Receive Polling Interval */
+#define USB_EP_RXINTERVAL10        0xFFCC11BD         /* USB Receive Polling Interval */
+#define USB_DMA_IRQ                0xFFCC1200         /* USB Interrupt Register */
+#define USB_DMA_CTL0               0xFFCC1204         /* USB DMA Control */
+#define USB_DMA_CTL1               0xFFCC1214         /* USB DMA Control */
+#define USB_DMA_CTL2               0xFFCC1224         /* USB DMA Control */
+#define USB_DMA_CTL3               0xFFCC1234         /* USB DMA Control */
+#define USB_DMA_CTL4               0xFFCC1244         /* USB DMA Control */
+#define USB_DMA_CTL5               0xFFCC1254         /* USB DMA Control */
+#define USB_DMA_CTL6               0xFFCC1264         /* USB DMA Control */
+#define USB_DMA_CTL7               0xFFCC1274         /* USB DMA Control */
+#define USB_DMA_ADDR0              0xFFCC1208         /* USB DMA Address */
+#define USB_DMA_ADDR1              0xFFCC1218         /* USB DMA Address */
+#define USB_DMA_ADDR2              0xFFCC1228         /* USB DMA Address */
+#define USB_DMA_ADDR3              0xFFCC1238         /* USB DMA Address */
+#define USB_DMA_ADDR4              0xFFCC1248         /* USB DMA Address */
+#define USB_DMA_ADDR5              0xFFCC1258         /* USB DMA Address */
+#define USB_DMA_ADDR6              0xFFCC1268         /* USB DMA Address */
+#define USB_DMA_ADDR7              0xFFCC1278         /* USB DMA Address */
+#define USB_DMA_CNT0               0xFFCC120C         /* USB DMA Count */
+#define USB_DMA_CNT1               0xFFCC121C         /* USB DMA Count */
+#define USB_DMA_CNT2               0xFFCC122C         /* USB DMA Count */
+#define USB_DMA_CNT3               0xFFCC123C         /* USB DMA Count */
+#define USB_DMA_CNT4               0xFFCC124C         /* USB DMA Count */
+#define USB_DMA_CNT5               0xFFCC125C         /* USB DMA Count */
+#define USB_DMA_CNT6               0xFFCC126C         /* USB DMA Count */
+#define USB_DMA_CNT7               0xFFCC127C         /* USB DMA Count */
+#define USB_RQPKTCNT0              0xFFCC1300         /* USB Request Packet Count */
+#define USB_RQPKTCNT1              0xFFCC1304         /* USB Request Packet Count */
+#define USB_RQPKTCNT2              0xFFCC1308         /* USB Request Packet Count */
+#define USB_RQPKTCNT3              0xFFCC130C         /* USB Request Packet Count */
+#define USB_RQPKTCNT4              0xFFCC1310         /* USB Request Packet Count */
+#define USB_RQPKTCNT5              0xFFCC1314         /* USB Request Packet Count */
+#define USB_RQPKTCNT6              0xFFCC1318         /* USB Request Packet Count */
+#define USB_RQPKTCNT7              0xFFCC131C         /* USB Request Packet Count */
+#define USB_RQPKTCNT8              0xFFCC1320         /* USB Request Packet Count */
+#define USB_RQPKTCNT9              0xFFCC1324         /* USB Request Packet Count */
+#define USB_RQPKTCNT10             0xFFCC1328         /* USB Request Packet Count */
+#define USB_CT_UCH                 0xFFCC1344         /* USB Chirp Timeout */
+#define USB_CT_HHSRTN              0xFFCC1346         /* USB High Speed Resume Return to Normal */
+#define USB_CT_HSBT                0xFFCC1348         /* USB High Speed Timeout */
+#define USB_LPM_ATTR               0xFFCC1360         /* USB LPM Attribute */
+#define USB_LPM_CTL                0xFFCC1362         /* USB LPM Control */
+#define USB_LPM_IEN                0xFFCC1363         /* USB LPM Interrupt Enable */
+#define USB_LPM_IRQ                0xFFCC1364         /* USB LPM Interrupt */
+#define USB_LPM_FADDR              0xFFCC1365         /* USB LPM Function Address */
+#define USB_VBUS_CTL               0xFFCC1380         /* USB VBus Control */
+#define USB_BAT_CHG                0xFFCC1381         /* USB Battery Charging */
+#define USB_PHY_CTL                0xFFCC1394         /* USB PHY Control */
+#define USB_TESTCTL                0xFFCC1397         /* USB Test Control */
+#define USB_PLL_OSC                0xFFCC1398         /* USB PLL and Oscillator Control */
+
+
+
+/* =========================
+        CHIPID
+   ========================= */
+
+#define                           CHIPID  0xffc00014
+/* CHIPID Masks */
+#define                   CHIPID_VERSION  0xF0000000
+#define                    CHIPID_FAMILY  0x0FFFF000
+#define               CHIPID_MANUFACTURE  0x00000FFE
+
+
+#endif /* _DEF_BF60X_H */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/dma.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/dma.h
new file mode 100644
index 0000000..872d141
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/dma.h
@@ -0,0 +1,116 @@
+/* mach/dma.h - arch-specific DMA defines
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define CH_SPORT0_TX                   0
+#define CH_SPORT0_RX                   1
+#define CH_SPORT1_TX                   2
+#define CH_SPORT1_RX                   3
+#define CH_SPORT2_TX                   4
+#define CH_SPORT2_RX                   5
+#define CH_SPI0_TX                     6
+#define CH_SPI0_RX                     7
+#define CH_SPI1_TX                     8
+#define CH_SPI1_RX                     9
+#define CH_RSI                        10
+#define CH_SDU                        11
+#define CH_LP0                        13
+#define CH_LP1                        14
+#define CH_LP2                        15
+#define CH_LP3                        16
+#define CH_UART0_TX                   17
+#define CH_UART0_RX                   18
+#define CH_UART1_TX                   19
+#define CH_UART1_RX                   20
+#define CH_MEM_STREAM0_SRC_CRC0      21
+#define CH_MEM_STREAM0_SRC           CH_MEM_STREAM0_SRC_CRC0
+#define CH_MEM_STREAM0_DEST_CRC0     22
+#define CH_MEM_STREAM0_DEST          CH_MEM_STREAM0_DEST_CRC0
+#define CH_MEM_STREAM1_SRC_CRC1      23
+#define CH_MEM_STREAM1_SRC           CH_MEM_STREAM1_SRC_CRC1
+#define CH_MEM_STREAM1_DEST_CRC1     24
+#define CH_MEM_STREAM1_DEST          CH_MEM_STREAM1_DEST_CRC1
+#define CH_MEM_STREAM2_SRC           25
+#define CH_MEM_STREAM2_DEST          26
+#define CH_MEM_STREAM3_SRC           27
+#define CH_MEM_STREAM3_DEST          28
+#define CH_EPPI0_CH0                  29
+#define CH_EPPI0_CH1                  30
+#define CH_EPPI1_CH0                  31
+#define CH_EPPI1_CH1                  32
+#define CH_EPPI2_CH0                  33
+#define CH_EPPI2_CH1                  34
+#define CH_PIXC_CH0                   35
+#define CH_PIXC_CH1                   36
+#define CH_PIXC_CH2                   37
+#define CH_PVP_CPDOB                  38
+#define CH_PVP_CPDOC                  39
+#define CH_PVP_CPSTAT                 40
+#define CH_PVP_CPCI                   41
+#define CH_PVP_MPDO                   42
+#define CH_PVP_MPDI                   43
+#define CH_PVP_MPSTAT                 44
+#define CH_PVP_MPCI                   45
+#define CH_PVP_CPDOA                  46
+
+#define MAX_DMA_CHANNELS 47
+#define MAX_DMA_SUSPEND_CHANNELS 0
+#define DMA_MMR_SIZE_32
+
+#define bfin_read_MDMA_S0_CONFIG bfin_read_MDMA0_SRC_CRC0_CONFIG
+#define bfin_write_MDMA_S0_CONFIG bfin_write_MDMA0_SRC_CRC0_CONFIG
+#define bfin_read_MDMA_S0_IRQ_STATUS bfin_read_MDMA0_SRC_CRC0_IRQ_STATUS
+#define bfin_write_MDMA_S0_IRQ_STATUS bfin_write_MDMA0_SRC_CRC0_IRQ_STATUS
+#define bfin_write_MDMA_S0_START_ADDR bfin_write_MDMA0_SRC_CRC0_START_ADDR
+#define bfin_write_MDMA_S0_X_COUNT bfin_write_MDMA0_SRC_CRC0_X_COUNT
+#define bfin_write_MDMA_S0_X_MODIFY bfin_write_MDMA0_SRC_CRC0_X_MODIFY
+#define bfin_write_MDMA_S0_Y_COUNT bfin_write_MDMA0_SRC_CRC0_Y_COUNT
+#define bfin_write_MDMA_S0_Y_MODIFY bfin_write_MDMA0_SRC_CRC0_Y_MODIFY
+#define bfin_read_MDMA_D0_CONFIG bfin_read_MDMA0_DEST_CRC0_CONFIG
+#define bfin_write_MDMA_D0_CONFIG bfin_write_MDMA0_DEST_CRC0_CONFIG
+#define bfin_read_MDMA_D0_IRQ_STATUS bfin_read_MDMA0_DEST_CRC0_IRQ_STATUS
+#define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA0_DEST_CRC0_IRQ_STATUS
+#define bfin_write_MDMA_D0_START_ADDR bfin_write_MDMA0_DEST_CRC0_START_ADDR
+#define bfin_write_MDMA_D0_X_COUNT bfin_write_MDMA0_DEST_CRC0_X_COUNT
+#define bfin_write_MDMA_D0_X_MODIFY bfin_write_MDMA0_DEST_CRC0_X_MODIFY
+#define bfin_write_MDMA_D0_Y_COUNT bfin_write_MDMA0_DEST_CRC0_Y_COUNT
+#define bfin_write_MDMA_D0_Y_MODIFY bfin_write_MDMA0_DEST_CRC0_Y_MODIFY
+
+#define bfin_read_MDMA_S1_CONFIG bfin_read_MDMA1_SRC_CRC1_CONFIG
+#define bfin_write_MDMA_S1_CONFIG bfin_write_MDMA1_SRC_CRC1_CONFIG
+#define bfin_read_MDMA_D1_CONFIG bfin_read_MDMA1_DEST_CRC1_CONFIG
+#define bfin_write_MDMA_D1_CONFIG bfin_write_MDMA1_DEST_CRC1_CONFIG
+#define bfin_read_MDMA_D1_IRQ_STATUS bfin_read_MDMA1_DEST_CRC1_IRQ_STATUS
+#define bfin_write_MDMA_D1_IRQ_STATUS bfin_write_MDMA1_DEST_CRC1_IRQ_STATUS
+
+#define bfin_read_MDMA_S3_CONFIG bfin_read_MDMA3_SRC_CONFIG
+#define bfin_write_MDMA_S3_CONFIG bfin_write_MDMA3_SRC_CONFIG
+#define bfin_read_MDMA_S3_IRQ_STATUS bfin_read_MDMA3_SRC_IRQ_STATUS
+#define bfin_write_MDMA_S3_IRQ_STATUS bfin_write_MDMA3_SRC_IRQ_STATUS
+#define bfin_write_MDMA_S3_START_ADDR bfin_write_MDMA3_SRC_START_ADDR
+#define bfin_write_MDMA_S3_X_COUNT bfin_write_MDMA3_SRC_X_COUNT
+#define bfin_write_MDMA_S3_X_MODIFY bfin_write_MDMA3_SRC_X_MODIFY
+#define bfin_write_MDMA_S3_Y_COUNT bfin_write_MDMA3_SRC_Y_COUNT
+#define bfin_write_MDMA_S3_Y_MODIFY bfin_write_MDMA3_SRC_Y_MODIFY
+#define bfin_read_MDMA_D3_CONFIG bfin_read_MDMA3_DEST_CONFIG
+#define bfin_write_MDMA_D3_CONFIG bfin_write_MDMA3_DEST_CONFIG
+#define bfin_read_MDMA_D3_IRQ_STATUS bfin_read_MDMA3_DEST_IRQ_STATUS
+#define bfin_write_MDMA_D3_IRQ_STATUS bfin_write_MDMA3_DEST_IRQ_STATUS
+#define bfin_write_MDMA_D3_START_ADDR bfin_write_MDMA3_DEST_START_ADDR
+#define bfin_write_MDMA_D3_X_COUNT bfin_write_MDMA3_DEST_X_COUNT
+#define bfin_write_MDMA_D3_X_MODIFY bfin_write_MDMA3_DEST_X_MODIFY
+#define bfin_write_MDMA_D3_Y_COUNT bfin_write_MDMA3_DEST_Y_COUNT
+#define bfin_write_MDMA_D3_Y_MODIFY bfin_write_MDMA3_DEST_Y_MODIFY
+
+#define MDMA_S0_NEXT_DESC_PTR MDMA0_SRC_CRC0_NEXT_DESC_PTR
+#define MDMA_D0_NEXT_DESC_PTR MDMA0_DEST_CRC0_NEXT_DESC_PTR
+#define MDMA_S1_NEXT_DESC_PTR MDMA1_SRC_CRC1_NEXT_DESC_PTR
+#define MDMA_D1_NEXT_DESC_PTR MDMA1_DEST_CRC1_NEXT_DESC_PTR
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/gpio.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/gpio.h
new file mode 100644
index 0000000..0718251
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/gpio.h
@@ -0,0 +1,165 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define MAX_BLACKFIN_GPIOS 112
+
+#define GPIO_PA0	0
+#define GPIO_PA1	1
+#define GPIO_PA2	2
+#define GPIO_PA3	3
+#define GPIO_PA4	4
+#define GPIO_PA5	5
+#define GPIO_PA6	6
+#define GPIO_PA7	7
+#define GPIO_PA8	8
+#define GPIO_PA9	9
+#define GPIO_PA10	10
+#define GPIO_PA11	11
+#define GPIO_PA12	12
+#define GPIO_PA13	13
+#define GPIO_PA14	14
+#define GPIO_PA15	15
+#define GPIO_PB0	16
+#define GPIO_PB1	17
+#define GPIO_PB2	18
+#define GPIO_PB3	19
+#define GPIO_PB4	20
+#define GPIO_PB5	21
+#define GPIO_PB6	22
+#define GPIO_PB7	23
+#define GPIO_PB8	24
+#define GPIO_PB9	25
+#define GPIO_PB10	26
+#define GPIO_PB11	27
+#define GPIO_PB12	28
+#define GPIO_PB13	29
+#define GPIO_PB14	30
+#define GPIO_PB15	31
+#define GPIO_PC0	32
+#define GPIO_PC1	33
+#define GPIO_PC2	34
+#define GPIO_PC3	35
+#define GPIO_PC4	36
+#define GPIO_PC5	37
+#define GPIO_PC6	38
+#define GPIO_PC7	39
+#define GPIO_PC8	40
+#define GPIO_PC9	41
+#define GPIO_PC10	42
+#define GPIO_PC11	43
+#define GPIO_PC12	44
+#define GPIO_PC13	45
+#define GPIO_PC14	46
+#define GPIO_PC15	47
+#define GPIO_PD0	48
+#define GPIO_PD1	49
+#define GPIO_PD2	50
+#define GPIO_PD3	51
+#define GPIO_PD4	52
+#define GPIO_PD5	53
+#define GPIO_PD6	54
+#define GPIO_PD7	55
+#define GPIO_PD8	56
+#define GPIO_PD9	57
+#define GPIO_PD10	58
+#define GPIO_PD11	59
+#define GPIO_PD12	60
+#define GPIO_PD13	61
+#define GPIO_PD14	62
+#define GPIO_PD15	63
+#define GPIO_PE0	64
+#define GPIO_PE1	65
+#define GPIO_PE2	66
+#define GPIO_PE3	67
+#define GPIO_PE4	68
+#define GPIO_PE5	69
+#define GPIO_PE6	70
+#define GPIO_PE7	71
+#define GPIO_PE8	72
+#define GPIO_PE9	73
+#define GPIO_PE10	74
+#define GPIO_PE11	75
+#define GPIO_PE12	76
+#define GPIO_PE13	77
+#define GPIO_PE14	78
+#define GPIO_PE15	79
+#define GPIO_PF0	80
+#define GPIO_PF1	81
+#define GPIO_PF2	82
+#define GPIO_PF3	83
+#define GPIO_PF4	84
+#define GPIO_PF5	85
+#define GPIO_PF6	86
+#define GPIO_PF7	87
+#define GPIO_PF8	88
+#define GPIO_PF9	89
+#define GPIO_PF10	90
+#define GPIO_PF11	91
+#define GPIO_PF12	92
+#define GPIO_PF13	93
+#define GPIO_PF14	94
+#define GPIO_PF15	95
+#define GPIO_PG0	96
+#define GPIO_PG1	97
+#define GPIO_PG2	98
+#define GPIO_PG3	99
+#define GPIO_PG4	100
+#define GPIO_PG5	101
+#define GPIO_PG6	102
+#define GPIO_PG7	103
+#define GPIO_PG8	104
+#define GPIO_PG9	105
+#define GPIO_PG10	106
+#define GPIO_PG11	107
+#define GPIO_PG12	108
+#define GPIO_PG13	109
+#define GPIO_PG14	110
+#define GPIO_PG15	111
+
+
+#define BFIN_GPIO_PINT 1
+#define NR_PINT_SYS_IRQS        6
+#define NR_PINTS                112
+
+
+#ifndef __ASSEMBLY__
+
+struct gpio_port_t {
+	unsigned long port_fer;
+	unsigned long port_fer_set;
+	unsigned long port_fer_clear;
+	unsigned long data;
+	unsigned long data_set;
+	unsigned long data_clear;
+	unsigned long dir;
+	unsigned long dir_set;
+	unsigned long dir_clear;
+	unsigned long inen;
+	unsigned long inen_set;
+	unsigned long inen_clear;
+	unsigned long port_mux;
+	unsigned long toggle;
+	unsigned long polar;
+	unsigned long polar_set;
+	unsigned long polar_clear;
+	unsigned long lock;
+	unsigned long spare;
+	unsigned long revid;
+};
+
+#endif
+
+#include <mach-common/ports-a.h>
+#include <mach-common/ports-b.h>
+#include <mach-common/ports-c.h>
+#include <mach-common/ports-d.h>
+#include <mach-common/ports-e.h>
+#include <mach-common/ports-f.h>
+#include <mach-common/ports-g.h>
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/irq.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/irq.h
new file mode 100644
index 0000000..d1cb6a8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/irq.h
@@ -0,0 +1,319 @@
+/*
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BF60x_IRQ_H_
+#define _BF60x_IRQ_H_
+
+#include <mach-common/irq.h>
+
+#define NR_PERI_INTS		(5 * 32)
+
+#define IRQ_SEC_ERR		BFIN_IRQ(0)	/* SEC Error */
+#define IRQ_CGU_EVT		BFIN_IRQ(1)	/* CGU Event */
+#define IRQ_WATCH0		BFIN_IRQ(2)	/* Watchdog0 Interrupt */
+#define IRQ_WATCH1		BFIN_IRQ(3)	/* Watchdog1 Interrupt */
+#define IRQ_L2CTL0_ECC_ERR	BFIN_IRQ(4)	/* L2 ECC Error */
+#define IRQ_L2CTL0_ECC_WARN	BFIN_IRQ(5)	/* L2 ECC Waring */
+#define IRQ_C0_DBL_FAULT	BFIN_IRQ(6)	/* Core 0 Double Fault */
+#define IRQ_C1_DBL_FAULT	BFIN_IRQ(7)	/* Core 1 Double Fault */
+#define IRQ_C0_HW_ERR		BFIN_IRQ(8)	/* Core 0 Hardware Error */
+#define IRQ_C1_HW_ERR		BFIN_IRQ(9)	/* Core 1 Hardware Error */
+#define IRQ_C0_NMI_L1_PARITY_ERR	BFIN_IRQ(10)	/* Core 0 Unhandled NMI or L1 Memory Parity Error */
+#define IRQ_C1_NMI_L1_PARITY_ERR	BFIN_IRQ(11)	/* Core 1 Unhandled NMI or L1 Memory Parity Error */
+#define CORE_IRQS		(IRQ_C1_NMI_L1_PARITY_ERR + 1)
+
+#define IRQ_TIMER0		BFIN_IRQ(12)	/* Timer 0 Interrupt */
+#define IRQ_TIMER1		BFIN_IRQ(13)	/* Timer 1 Interrupt */
+#define IRQ_TIMER2		BFIN_IRQ(14)	/* Timer 2 Interrupt */
+#define IRQ_TIMER3		BFIN_IRQ(15)	/* Timer 3 Interrupt */
+#define IRQ_TIMER4		BFIN_IRQ(16)	/* Timer 4 Interrupt */
+#define IRQ_TIMER5		BFIN_IRQ(17)	/* Timer 5 Interrupt */
+#define IRQ_TIMER6		BFIN_IRQ(18)	/* Timer 6 Interrupt */
+#define IRQ_TIMER7		BFIN_IRQ(19)	/* Timer 7 Interrupt */
+#define IRQ_TIMER_STAT		BFIN_IRQ(20)	/* Timer Block Status */
+#define IRQ_PINT0		BFIN_IRQ(21)	/* PINT0 Interrupt */
+#define IRQ_PINT1		BFIN_IRQ(22)	/* PINT1 Interrupt */
+#define IRQ_PINT2		BFIN_IRQ(23)	/* PINT2 Interrupt */
+#define IRQ_PINT3		BFIN_IRQ(24)	/* PINT3 Interrupt */
+#define IRQ_PINT4		BFIN_IRQ(25)	/* PINT4 Interrupt */
+#define IRQ_PINT5		BFIN_IRQ(26)	/* PINT5 Interrupt */
+#define IRQ_CNT			BFIN_IRQ(27)	/* CNT Interrupt */
+#define IRQ_PWM0_TRIP		BFIN_IRQ(28)	/* PWM0 Trip Interrupt */
+#define IRQ_PWM0_SYNC		BFIN_IRQ(29)	/* PWM0 Sync Interrupt */
+#define IRQ_PWM1_TRIP		BFIN_IRQ(30)	/* PWM1 Trip Interrupt */
+#define IRQ_PWM1_SYNC		BFIN_IRQ(31)	/* PWM1 Sync Interrupt */
+#define IRQ_TWI0		BFIN_IRQ(32)	/* TWI0 Interrupt */
+#define IRQ_TWI1		BFIN_IRQ(33)	/* TWI1 Interrupt */
+#define IRQ_SOFT0		BFIN_IRQ(34)	/* Software-Driven Interrupt 0 */
+#define IRQ_SOFT1		BFIN_IRQ(35)	/* Software-Driven Interrupt 1 */
+#define IRQ_SOFT2		BFIN_IRQ(36)	/* Software-Driven Interrupt 2 */
+#define IRQ_SOFT3		BFIN_IRQ(37)	/* Software-Driven Interrupt 3 */
+#define IRQ_ACM_EVT_MISS	BFIN_IRQ(38)	/* ACM Event Miss */
+#define IRQ_ACM_EVT_COMPLETE 	BFIN_IRQ(39)	/* ACM Event Complete */
+#define IRQ_CAN0_RX		BFIN_IRQ(40)	/* CAN0 Receive Interrupt */
+#define IRQ_CAN0_TX		BFIN_IRQ(41)	/* CAN0 Transmit Interrupt */
+#define IRQ_CAN0_STAT		BFIN_IRQ(42)	/* CAN0 Status */
+#define IRQ_SPORT0_TX		BFIN_IRQ(43)	/* SPORT0 TX Interrupt (DMA0) */
+#define IRQ_SPORT0_TX_STAT	BFIN_IRQ(44)	/* SPORT0 TX Status Interrupt */
+#define IRQ_SPORT0_RX		BFIN_IRQ(45)	/* SPORT0 RX Interrupt (DMA1) */
+#define IRQ_SPORT0_RX_STAT	BFIN_IRQ(46)	/* SPORT0 RX Status Interrupt */
+#define IRQ_SPORT1_TX		BFIN_IRQ(47)	/* SPORT1 TX Interrupt (DMA2) */
+#define IRQ_SPORT1_TX_STAT	BFIN_IRQ(48)	/* SPORT1 TX Status Interrupt */
+#define IRQ_SPORT1_RX		BFIN_IRQ(49)	/* SPORT1 RX Interrupt (DMA3) */
+#define IRQ_SPORT1_RX_STAT	BFIN_IRQ(50)	/* SPORT1 RX Status Interrupt */
+#define IRQ_SPORT2_TX		BFIN_IRQ(51)	/* SPORT2 TX Interrupt (DMA4) */
+#define IRQ_SPORT2_TX_STAT	BFIN_IRQ(52)	/* SPORT2 TX Status Interrupt */
+#define IRQ_SPORT2_RX		BFIN_IRQ(53)	/* SPORT2 RX Interrupt (DMA5) */
+#define IRQ_SPORT2_RX_STAT	BFIN_IRQ(54)	/* SPORT2 RX Status Interrupt */
+#define IRQ_SPI0_TX		BFIN_IRQ(55)	/* SPI0 TX Interrupt (DMA6) */
+#define IRQ_SPI0_RX		BFIN_IRQ(56)	/* SPI0 RX Interrupt (DMA7) */
+#define IRQ_SPI0_STAT		BFIN_IRQ(57)	/* SPI0 Status Interrupt */
+#define IRQ_SPI1_TX		BFIN_IRQ(58)	/* SPI1 TX Interrupt (DMA8) */
+#define IRQ_SPI1_RX		BFIN_IRQ(59)	/* SPI1 RX Interrupt (DMA9) */
+#define IRQ_SPI1_STAT		BFIN_IRQ(60)	/* SPI1 Status Interrupt */
+#define IRQ_RSI			BFIN_IRQ(61)	/* RSI (DMA10) Interrupt */
+#define IRQ_RSI_INT0		BFIN_IRQ(62)	/* RSI Interrupt0 */
+#define IRQ_RSI_INT1		BFIN_IRQ(63)	/* RSI Interrupt1 */
+#define IRQ_SDU			BFIN_IRQ(64)	/* DMA11 Data (SDU) */
+/*       -- RESERVED --             65		   DMA12 Data (Reserved) */
+/*       -- RESERVED --             66		   Reserved */
+/*       -- RESERVED --             67		   Reserved */
+#define IRQ_EMAC0_STAT		BFIN_IRQ(68)	/* EMAC0 Status */
+/*       -- RESERVED --             69		   EMAC0 Power (Reserved) */
+#define IRQ_EMAC1_STAT		BFIN_IRQ(70)	/* EMAC1 Status */
+/*       -- RESERVED --             71		   EMAC1 Power (Reserved) */
+#define IRQ_LP0			BFIN_IRQ(72)	/* DMA13 Data (Link Port 0) */
+#define IRQ_LP0_STAT		BFIN_IRQ(73)	/* Link Port 0 Status */
+#define IRQ_LP1			BFIN_IRQ(74)	/* DMA14 Data (Link Port 1) */
+#define IRQ_LP1_STAT		BFIN_IRQ(75)	/* Link Port 1 Status */
+#define IRQ_LP2			BFIN_IRQ(76)	/* DMA15 Data (Link Port 2) */
+#define IRQ_LP2_STAT		BFIN_IRQ(77)	/* Link Port 2 Status */
+#define IRQ_LP3			BFIN_IRQ(78)	/* DMA16 Data(Link Port 3) */
+#define IRQ_LP3_STAT		BFIN_IRQ(79)	/* Link Port 3 Status */
+#define IRQ_UART0_TX		BFIN_IRQ(80)	/* UART0 TX Interrupt (DMA17) */
+#define IRQ_UART0_RX		BFIN_IRQ(81)	/* UART0 RX Interrupt (DMA18) */
+#define IRQ_UART0_STAT		BFIN_IRQ(82)	/* UART0 Status(Error) Interrupt */
+#define IRQ_UART1_TX		BFIN_IRQ(83)	/* UART1 TX Interrupt (DMA19) */
+#define IRQ_UART1_RX		BFIN_IRQ(84)	/* UART1 RX Interrupt (DMA20) */
+#define IRQ_UART1_STAT		BFIN_IRQ(85)	/* UART1 Status(Error) Interrupt */
+#define IRQ_MDMA0_SRC_CRC0	BFIN_IRQ(86)	/* DMA21 Data (MDMA Stream 0 Source/CRC0 Input Channel) */
+#define IRQ_MDMA0_DEST_CRC0	BFIN_IRQ(87)	/* DMA22 Data (MDMA Stream 0 Destination/CRC0 Output Channel) */
+#define IRQ_MDMAS0		IRQ_MDMA0_DEST_CRC0
+#define IRQ_CRC0_DCNTEXP	BFIN_IRQ(88)	/* CRC0 DATACOUNT Expiration */
+#define IRQ_CRC0_ERR		BFIN_IRQ(89)	/* CRC0 Error */
+#define IRQ_MDMA1_SRC_CRC1	BFIN_IRQ(90)	/* DMA23 Data (MDMA Stream 1 Source/CRC1 Input Channel) */
+#define IRQ_MDMA1_DEST_CRC1	BFIN_IRQ(91)	/* DMA24 Data (MDMA Stream 1 Destination/CRC1 Output Channel) */
+#define IRQ_MDMAS1		IRQ_MDMA1_DEST_CRC1
+#define IRQ_CRC1_DCNTEXP	BFIN_IRQ(92)	/* CRC1 DATACOUNT Expiration */
+#define IRQ_CRC1_ERR		BFIN_IRQ(93)	/* CRC1 Error */
+#define IRQ_MDMA2_SRC		BFIN_IRQ(94)	/* DMA25 Data (MDMA Stream 2 Source Channel) */
+#define IRQ_MDMA2_DEST		BFIN_IRQ(95)	/* DMA26 Data (MDMA Stream 2 Destination Channel) */
+#define IRQ_MDMAS2		IRQ_MDMA2_DEST
+#define IRQ_MDMA3_SRC		BFIN_IRQ(96)	/* DMA27 Data (MDMA Stream 3 Source Channel) */
+#define IRQ_MDMA3_DEST 		BFIN_IRQ(97)	/* DMA28 Data (MDMA Stream 3 Destination Channel) */
+#define IRQ_MDMAS3		IRQ_MDMA3_DEST
+#define IRQ_EPPI0_CH0 		BFIN_IRQ(98)	/* DMA29 Data (EPPI0 Channel 0) */
+#define IRQ_EPPI0_CH1 		BFIN_IRQ(99)	/* DMA30 Data (EPPI0 Channel 1) */
+#define IRQ_EPPI0_STAT		BFIN_IRQ(100)	/* EPPI0 Status */
+#define IRQ_EPPI2_CH0		BFIN_IRQ(101)	/* DMA31 Data (EPPI2 Channel 0) */
+#define IRQ_EPPI2_CH1		BFIN_IRQ(102)	/* DMA32 Data (EPPI2 Channel 1) */
+#define IRQ_EPPI2_STAT		BFIN_IRQ(103)	/* EPPI2 Status */
+#define IRQ_EPPI1_CH0		BFIN_IRQ(104)	/* DMA33 Data (EPPI1 Channel 0) */
+#define IRQ_EPPI1_CH1		BFIN_IRQ(105)	/* DMA34 Data (EPPI1 Channel 1) */
+#define IRQ_EPPI1_STAT		BFIN_IRQ(106)	/* EPPI1 Status */
+#define IRQ_PIXC_CH0		BFIN_IRQ(107)	/* DMA35 Data (PIXC Channel 0) */
+#define IRQ_PIXC_CH1		BFIN_IRQ(108)	/* DMA36 Data (PIXC Channel 1) */
+#define IRQ_PIXC_CH2		BFIN_IRQ(109)	/* DMA37 Data (PIXC Channel 2) */
+#define IRQ_PIXC_STAT		BFIN_IRQ(110)	/* PIXC Status */
+#define IRQ_PVP_CPDOB		BFIN_IRQ(111)	/* DMA38 Data (PVP0 Camera Pipe Data Out B) */
+#define IRQ_PVP_CPDOC		BFIN_IRQ(112)	/* DMA39 Data (PVP0 Camera Pipe Data Out C) */
+#define IRQ_PVP_CPSTAT		BFIN_IRQ(113)	/* DMA40 Data (PVP0 Camera Pipe Status Out) */
+#define IRQ_PVP_CPCI		BFIN_IRQ(114)	/* DMA41 Data (PVP0 Camera Pipe Control In) */
+#define IRQ_PVP_STAT0		BFIN_IRQ(115)	/* PVP0 Status 0 */
+#define IRQ_PVP_MPDO		BFIN_IRQ(116)	/* DMA42 Data (PVP0 Memory Pipe Data Out) */
+#define IRQ_PVP_MPDI		BFIN_IRQ(117)	/* DMA43 Data (PVP0 Memory Pipe Data In) */
+#define IRQ_PVP_MPSTAT		BFIN_IRQ(118)	/* DMA44 Data (PVP0 Memory Pipe Status Out) */
+#define IRQ_PVP_MPCI		BFIN_IRQ(119)	/* DMA45 Data (PVP0 Memory Pipe Control In) */
+#define IRQ_PVP_CPDOA		BFIN_IRQ(120)	/* DMA46 Data (PVP0 Camera Pipe Data Out A) */
+#define IRQ_PVP_STAT1		BFIN_IRQ(121)	/* PVP0 Status 1 */
+#define IRQ_USB_STAT		BFIN_IRQ(122)	/* USB Status Interrupt */
+#define IRQ_USB_DMA		BFIN_IRQ(123)	/* USB DMA Interrupt */
+#define IRQ_TRU_INT0		BFIN_IRQ(124)	/* TRU0 Interrupt 0 */
+#define IRQ_TRU_INT1		BFIN_IRQ(125)	/* TRU0 Interrupt 1 */
+#define IRQ_TRU_INT2		BFIN_IRQ(126)	/* TRU0 Interrupt 2 */
+#define IRQ_TRU_INT3		BFIN_IRQ(127)	/* TRU0 Interrupt 3 */
+#define IRQ_DMAC0_ERROR		BFIN_IRQ(128)	/* DMAC0 Status Interrupt */
+#define IRQ_CGU0_ERROR		BFIN_IRQ(129)	/* CGU0 Error */
+/*       -- RESERVED --             130		   Reserved */
+#define IRQ_DPM			BFIN_IRQ(131)	/* DPM0 Event */
+/*       -- RESERVED --             132		   Reserved */
+#define IRQ_SWU0		BFIN_IRQ(133)	/* SWU0 */
+#define IRQ_SWU1		BFIN_IRQ(134)	/* SWU1 */
+#define IRQ_SWU2		BFIN_IRQ(135)	/* SWU2 */
+#define IRQ_SWU3		BFIN_IRQ(136)	/* SWU3 */
+#define IRQ_SWU4		BFIN_IRQ(137)	/* SWU4 */
+#define IRQ_SWU5		BFIN_IRQ(138)	/* SWU5 */
+#define IRQ_SWU6		BFIN_IRQ(139)	/* SWU6 */
+
+#define SYS_IRQS		IRQ_SWU6
+
+#define BFIN_PA_IRQ(x)		((x) + SYS_IRQS + 1)
+#define IRQ_PA0			BFIN_PA_IRQ(0)
+#define IRQ_PA1			BFIN_PA_IRQ(1)
+#define IRQ_PA2			BFIN_PA_IRQ(2)
+#define IRQ_PA3			BFIN_PA_IRQ(3)
+#define IRQ_PA4			BFIN_PA_IRQ(4)
+#define IRQ_PA5			BFIN_PA_IRQ(5)
+#define IRQ_PA6			BFIN_PA_IRQ(6)
+#define IRQ_PA7			BFIN_PA_IRQ(7)
+#define IRQ_PA8			BFIN_PA_IRQ(8)
+#define IRQ_PA9			BFIN_PA_IRQ(9)
+#define IRQ_PA10		BFIN_PA_IRQ(10)
+#define IRQ_PA11		BFIN_PA_IRQ(11)
+#define IRQ_PA12		BFIN_PA_IRQ(12)
+#define IRQ_PA13		BFIN_PA_IRQ(13)
+#define IRQ_PA14		BFIN_PA_IRQ(14)
+#define IRQ_PA15		BFIN_PA_IRQ(15)
+
+#define BFIN_PB_IRQ(x)		((x) + IRQ_PA15 + 1)
+#define IRQ_PB0			BFIN_PB_IRQ(0)
+#define IRQ_PB1			BFIN_PB_IRQ(1)
+#define IRQ_PB2			BFIN_PB_IRQ(2)
+#define IRQ_PB3			BFIN_PB_IRQ(3)
+#define IRQ_PB4			BFIN_PB_IRQ(4)
+#define IRQ_PB5			BFIN_PB_IRQ(5)
+#define IRQ_PB6			BFIN_PB_IRQ(6)
+#define IRQ_PB7			BFIN_PB_IRQ(7)
+#define IRQ_PB8			BFIN_PB_IRQ(8)
+#define IRQ_PB9			BFIN_PB_IRQ(9)
+#define IRQ_PB10		BFIN_PB_IRQ(10)
+#define IRQ_PB11		BFIN_PB_IRQ(11)
+#define IRQ_PB12		BFIN_PB_IRQ(12)
+#define IRQ_PB13		BFIN_PB_IRQ(13)
+#define IRQ_PB14		BFIN_PB_IRQ(14)
+#define IRQ_PB15		BFIN_PB_IRQ(15)		/* N/A */
+
+#define BFIN_PC_IRQ(x)		((x) + IRQ_PB15 + 1)
+#define IRQ_PC0			BFIN_PC_IRQ(0)
+#define IRQ_PC1			BFIN_PC_IRQ(1)
+#define IRQ_PC2			BFIN_PC_IRQ(2)
+#define IRQ_PC3			BFIN_PC_IRQ(3)
+#define IRQ_PC4			BFIN_PC_IRQ(4)
+#define IRQ_PC5			BFIN_PC_IRQ(5)
+#define IRQ_PC6			BFIN_PC_IRQ(6)
+#define IRQ_PC7			BFIN_PC_IRQ(7)
+#define IRQ_PC8			BFIN_PC_IRQ(8)
+#define IRQ_PC9			BFIN_PC_IRQ(9)
+#define IRQ_PC10		BFIN_PC_IRQ(10)
+#define IRQ_PC11		BFIN_PC_IRQ(11)
+#define IRQ_PC12		BFIN_PC_IRQ(12)
+#define IRQ_PC13		BFIN_PC_IRQ(13)
+#define IRQ_PC14		BFIN_PC_IRQ(14)		/* N/A */
+#define IRQ_PC15		BFIN_PC_IRQ(15)		/* N/A */
+
+#define BFIN_PD_IRQ(x)		((x) + IRQ_PC15 + 1)
+#define IRQ_PD0			BFIN_PD_IRQ(0)
+#define IRQ_PD1			BFIN_PD_IRQ(1)
+#define IRQ_PD2			BFIN_PD_IRQ(2)
+#define IRQ_PD3			BFIN_PD_IRQ(3)
+#define IRQ_PD4			BFIN_PD_IRQ(4)
+#define IRQ_PD5			BFIN_PD_IRQ(5)
+#define IRQ_PD6			BFIN_PD_IRQ(6)
+#define IRQ_PD7			BFIN_PD_IRQ(7)
+#define IRQ_PD8			BFIN_PD_IRQ(8)
+#define IRQ_PD9			BFIN_PD_IRQ(9)
+#define IRQ_PD10		BFIN_PD_IRQ(10)
+#define IRQ_PD11		BFIN_PD_IRQ(11)
+#define IRQ_PD12		BFIN_PD_IRQ(12)
+#define IRQ_PD13		BFIN_PD_IRQ(13)
+#define IRQ_PD14		BFIN_PD_IRQ(14)
+#define IRQ_PD15		BFIN_PD_IRQ(15)
+
+#define BFIN_PE_IRQ(x)		((x) + IRQ_PD15 + 1)
+#define IRQ_PE0			BFIN_PE_IRQ(0)
+#define IRQ_PE1			BFIN_PE_IRQ(1)
+#define IRQ_PE2			BFIN_PE_IRQ(2)
+#define IRQ_PE3			BFIN_PE_IRQ(3)
+#define IRQ_PE4			BFIN_PE_IRQ(4)
+#define IRQ_PE5			BFIN_PE_IRQ(5)
+#define IRQ_PE6			BFIN_PE_IRQ(6)
+#define IRQ_PE7			BFIN_PE_IRQ(7)
+#define IRQ_PE8			BFIN_PE_IRQ(8)
+#define IRQ_PE9			BFIN_PE_IRQ(9)
+#define IRQ_PE10		BFIN_PE_IRQ(10)
+#define IRQ_PE11		BFIN_PE_IRQ(11)
+#define IRQ_PE12		BFIN_PE_IRQ(12)
+#define IRQ_PE13		BFIN_PE_IRQ(13)
+#define IRQ_PE14		BFIN_PE_IRQ(14)
+#define IRQ_PE15		BFIN_PE_IRQ(15)
+
+#define BFIN_PF_IRQ(x)		((x) + IRQ_PE15 + 1)
+#define IRQ_PF0			BFIN_PF_IRQ(0)
+#define IRQ_PF1			BFIN_PF_IRQ(1)
+#define IRQ_PF2			BFIN_PF_IRQ(2)
+#define IRQ_PF3			BFIN_PF_IRQ(3)
+#define IRQ_PF4			BFIN_PF_IRQ(4)
+#define IRQ_PF5			BFIN_PF_IRQ(5)
+#define IRQ_PF6			BFIN_PF_IRQ(6)
+#define IRQ_PF7			BFIN_PF_IRQ(7)
+#define IRQ_PF8			BFIN_PF_IRQ(8)
+#define IRQ_PF9			BFIN_PF_IRQ(9)
+#define IRQ_PF10		BFIN_PF_IRQ(10)
+#define IRQ_PF11		BFIN_PF_IRQ(11)
+#define IRQ_PF12		BFIN_PF_IRQ(12)
+#define IRQ_PF13		BFIN_PF_IRQ(13)
+#define IRQ_PF14		BFIN_PF_IRQ(14)
+#define IRQ_PF15		BFIN_PF_IRQ(15)
+
+#define BFIN_PG_IRQ(x)		((x) + IRQ_PF15 + 1)
+#define IRQ_PG0			BFIN_PG_IRQ(0)
+#define IRQ_PG1			BFIN_PG_IRQ(1)
+#define IRQ_PG2			BFIN_PG_IRQ(2)
+#define IRQ_PG3			BFIN_PG_IRQ(3)
+#define IRQ_PG4			BFIN_PG_IRQ(4)
+#define IRQ_PG5			BFIN_PG_IRQ(5)
+#define IRQ_PG6			BFIN_PG_IRQ(6)
+#define IRQ_PG7			BFIN_PG_IRQ(7)
+#define IRQ_PG8			BFIN_PG_IRQ(8)
+#define IRQ_PG9			BFIN_PG_IRQ(9)
+#define IRQ_PG10		BFIN_PG_IRQ(10)
+#define IRQ_PG11		BFIN_PG_IRQ(11)
+#define IRQ_PG12		BFIN_PG_IRQ(12)
+#define IRQ_PG13		BFIN_PG_IRQ(13)
+#define IRQ_PG14		BFIN_PG_IRQ(14)
+#define IRQ_PG15		BFIN_PG_IRQ(15)
+
+#define GPIO_IRQ_BASE		IRQ_PA0
+
+#define NR_MACH_IRQS		(IRQ_PG15 + 1)
+
+#define SEC_SCTL_PRIO_OFFSET	8
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+extern u8 sec_int_priority[];
+
+/*
+ * gpio pint registers layout
+ */
+struct bfin_pint_regs {
+	u32 mask_set;
+	u32 mask_clear;
+	u32 request;
+	u32 assign;
+	u32 edge_set;
+	u32 edge_clear;
+	u32 invert_set;
+	u32 invert_clear;
+	u32 pinstate;
+	u32 latch;
+	u32 __pad0[2];
+};
+
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/mem_map.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/mem_map.h
new file mode 100644
index 0000000..20b65bf
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/mem_map.h
@@ -0,0 +1,86 @@
+/*
+ * BF60x memory map
+ *
+ * Copyright 2011 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
+
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0xBC000000	 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x04000000	/* 64M */
+#define ASYNC_BANK2_BASE	0xB8000000	 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x04000000	/* 64M */
+#define ASYNC_BANK1_BASE	0xB4000000	 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x04000000	/* 64M */
+#define ASYNC_BANK0_BASE	0xB0000000	 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x04000000	/* 64M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xC8000000
+#define BOOT_ROM_LENGTH		0x8000
+
+/* Level 1 Memory */
+
+/* Memory Map for ADSP-BF60x processors */
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
+#define L1_CODE_LENGTH      0x10000
+#else
+#define BFIN_ICACHESIZE	(0*1024)
+#define L1_CODE_LENGTH      0x14000
+#endif
+
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+
+#define COREA_L1_SCRATCH_START  0xFFB00000
+#define COREB_L1_SCRATCH_START  0xFF700000
+
+#define COREB_L1_CODE_START       0xFF600000
+#define COREB_L1_DATA_A_START     0xFF400000
+#define COREB_L1_DATA_B_START     0xFF500000
+
+#define COREB_L1_CODE_LENGTH     0x14000
+#define COREB_L1_DATA_A_LENGTH   0x8000
+#define COREB_L1_DATA_B_LENGTH   0x8000
+
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+
+/* Level 2 Memory */
+#define L2_START            0xC8080000
+#define L2_LENGTH           0x40000
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/pll.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/pll.h
new file mode 100644
index 0000000..1857a4a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/pll.h
@@ -0,0 +1 @@
+/* #include <mach-common/pll.h> */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/pm.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/pm.h
new file mode 100644
index 0000000..a1efd93
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/pm.h
@@ -0,0 +1,25 @@
+/*
+ * Blackfin bf609 power management
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2
+ */
+
+#ifndef __MACH_BF609_PM_H__
+#define __MACH_BF609_PM_H__
+
+#include <linux/suspend.h>
+#include <linux/platform_device.h>
+
+extern int bfin609_pm_enter(suspend_state_t state);
+extern int bf609_pm_prepare(void);
+extern void bf609_pm_finish(void);
+
+void bf609_hibernate(void);
+void bfin_sec_raise_irq(unsigned int sid);
+void coreb_enable(void);
+
+int bf609_nor_flash_init(struct platform_device *pdev);
+void bf609_nor_flash_exit(struct platform_device *pdev);
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/portmux.h b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/portmux.h
new file mode 100644
index 0000000..c48bb71
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/include/mach/portmux.h
@@ -0,0 +1,349 @@
+/*
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+/* EMAC RMII Port Mux */
+#define P_MII0_MDC	(P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0))
+#define P_MII0_MDIO	(P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0))
+#define P_MII0_ETxD0	(P_DEFINED | P_IDENT(GPIO_PC2) | P_FUNCT(0))
+#define P_MII0_ERxD0	(P_DEFINED | P_IDENT(GPIO_PC0) | P_FUNCT(0))
+#define P_MII0_ETxD1	(P_DEFINED | P_IDENT(GPIO_PC3) | P_FUNCT(0))
+#define P_MII0_ERxD1	(P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(0))
+#define P_MII0_ETxEN	(P_DEFINED | P_IDENT(GPIO_PB13) | P_FUNCT(0))
+#define P_MII0_PHYINT	(P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(0))
+#define P_MII0_CRS	(P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(0))
+#define P_MII0_ERxER	(P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(0))
+#define P_MII0_TxCLK	(P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(0))
+#define P_MII0_PTPPPS	(P_DEFINED | P_IDENT(GPIO_PB15) | P_FUNCT(0))
+
+#define P_RMII0 {\
+	P_MII0_ETxD0, \
+	P_MII0_ETxD1, \
+	P_MII0_ETxEN, \
+	P_MII0_ERxD0, \
+	P_MII0_ERxD1, \
+	P_MII0_ERxER, \
+	P_MII0_TxCLK, \
+	P_MII0_PHYINT, \
+	P_MII0_CRS, \
+	P_MII0_PTPPPS, \
+	P_MII0_MDC, \
+	P_MII0_MDIO, 0}
+
+#define P_MII1_MDC	(P_DEFINED | P_IDENT(GPIO_PE10) | P_FUNCT(0))
+#define P_MII1_MDIO	(P_DEFINED | P_IDENT(GPIO_PE11) | P_FUNCT(0))
+#define P_MII1_ETxD0	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
+#define P_MII1_ERxD0	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
+#define P_MII1_ETxD1	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0))
+#define P_MII1_ERxD1	(P_DEFINED | P_IDENT(GPIO_PE15) | P_FUNCT(0))
+#define P_MII1_ETxEN	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_MII1_PHYINT	(P_DEFINED | P_IDENT(GPIO_PE12) | P_FUNCT(0))
+#define P_MII1_CRS	(P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(0))
+#define P_MII1_ERxER	(P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(0))
+#define P_MII1_TxCLK	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_MII1_PTPPPS	(P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0))
+
+#define P_RMII1 {\
+	P_MII1_ETxD0, \
+	P_MII1_ETxD1, \
+	P_MII1_ETxEN, \
+	P_MII1_ERxD0, \
+	P_MII1_ERxD1, \
+	P_MII1_ERxER, \
+	P_MII1_TxCLK, \
+	P_MII1_PHYINT, \
+	P_MII1_CRS, \
+	P_MII1_PTPPPS, \
+	P_MII1_MDC, \
+	P_MII1_MDIO, 0}
+
+/* PPI Port Mux */
+#define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+#define P_PPI0_D1	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+#define P_PPI0_D2	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+#define P_PPI0_D3	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+#define P_PPI0_D4	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+#define P_PPI0_D5	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+#define P_PPI0_D6	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+#define P_PPI0_D7	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
+#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
+#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
+#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
+#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+#define P_PPI0_D16	(P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(1))
+#define P_PPI0_D17	(P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(1))
+#define P_PPI0_D18	(P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(1))
+#define P_PPI0_D19	(P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(1))
+#define P_PPI0_D20	(P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(1))
+#define P_PPI0_D21	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(1))
+#define P_PPI0_D22	(P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(1))
+#define P_PPI0_D23	(P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(1))
+#define P_PPI0_CLK	(P_DEFINED | P_IDENT(GPIO_PE9) | P_FUNCT(1))
+#define P_PPI0_FS1	(P_DEFINED | P_IDENT(GPIO_PE8) | P_FUNCT(1))
+#define P_PPI0_FS2	(P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(1))
+#define P_PPI0_FS3	(P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(1))
+
+#define P_PPI1_D0	(P_DEFINED | P_IDENT(GPIO_PC0) | P_FUNCT(1))
+#define P_PPI1_D1	(P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(1))
+#define P_PPI1_D2	(P_DEFINED | P_IDENT(GPIO_PC2) | P_FUNCT(1))
+#define P_PPI1_D3	(P_DEFINED | P_IDENT(GPIO_PC3) | P_FUNCT(1))
+#define P_PPI1_D4	(P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(1))
+#define P_PPI1_D5	(P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(1))
+#define P_PPI1_D6	(P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(1))
+#define P_PPI1_D7	(P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(1))
+#define P_PPI1_D8	(P_DEFINED | P_IDENT(GPIO_PC8) | P_FUNCT(1))
+#define P_PPI1_D9	(P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(1))
+#define P_PPI1_D10	(P_DEFINED | P_IDENT(GPIO_PC10) | P_FUNCT(1))
+#define P_PPI1_D11	(P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(1))
+#define P_PPI1_D12	(P_DEFINED | P_IDENT(GPIO_PC12) | P_FUNCT(1))
+#define P_PPI1_D13	(P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(1))
+#define P_PPI1_D14	(P_DEFINED | P_IDENT(GPIO_PC14) | P_FUNCT(1))
+#define P_PPI1_D15	(P_DEFINED | P_IDENT(GPIO_PC15) | P_FUNCT(1))
+#define P_PPI1_D16	(P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(1))
+#define P_PPI1_D17	(P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(1))
+#define P_PPI1_CLK	(P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(1))
+#define P_PPI1_FS1	(P_DEFINED | P_IDENT(GPIO_PB13) | P_FUNCT(1))
+#define P_PPI1_FS2	(P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(1))
+#define P_PPI1_FS3	(P_DEFINED | P_IDENT(GPIO_PB15) | P_FUNCT(1))
+
+#define P_PPI2_D0	(P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(1))
+#define P_PPI2_D1	(P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(1))
+#define P_PPI2_D2	(P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(1))
+#define P_PPI2_D3	(P_DEFINED | P_IDENT(GPIO_PA3) | P_FUNCT(1))
+#define P_PPI2_D4	(P_DEFINED | P_IDENT(GPIO_PA4) | P_FUNCT(1))
+#define P_PPI2_D5	(P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(1))
+#define P_PPI2_D6	(P_DEFINED | P_IDENT(GPIO_PA6) | P_FUNCT(1))
+#define P_PPI2_D7	(P_DEFINED | P_IDENT(GPIO_PA7) | P_FUNCT(1))
+#define P_PPI2_D8	(P_DEFINED | P_IDENT(GPIO_PA8) | P_FUNCT(1))
+#define P_PPI2_D9	(P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(1))
+#define P_PPI2_D10	(P_DEFINED | P_IDENT(GPIO_PA10) | P_FUNCT(1))
+#define P_PPI2_D11	(P_DEFINED | P_IDENT(GPIO_PA11) | P_FUNCT(1))
+#define P_PPI2_D12	(P_DEFINED | P_IDENT(GPIO_PA12) | P_FUNCT(1))
+#define P_PPI2_D13	(P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(1))
+#define P_PPI2_D14	(P_DEFINED | P_IDENT(GPIO_PA14) | P_FUNCT(1))
+#define P_PPI2_D15	(P_DEFINED | P_IDENT(GPIO_PA15) | P_FUNCT(1))
+#define P_PPI2_D16	(P_DEFINED | P_IDENT(GPIO_PB7) | P_FUNCT(1))
+#define P_PPI2_D17	(P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(1))
+#define P_PPI2_CLK	(P_DEFINED | P_IDENT(GPIO_PB0) | P_FUNCT(1))
+#define P_PPI2_FS1	(P_DEFINED | P_IDENT(GPIO_PB1) | P_FUNCT(1))
+#define P_PPI2_FS2	(P_DEFINED | P_IDENT(GPIO_PB2) | P_FUNCT(1))
+#define P_PPI2_FS3	(P_DEFINED | P_IDENT(GPIO_PB3) | P_FUNCT(1))
+
+/* SPI Port Mux */
+#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(3))
+#define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(0))
+#define P_SPI0_MISO	(P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(0))
+#define P_SPI0_MOSI	(P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(0))
+#define P_SPI0_RDY	(P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(0))
+#define P_SPI0_D2	(P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(0))
+#define P_SPI0_D3	(P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(0))
+
+#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(0))
+#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(2))
+#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(2))
+#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PC15) | P_FUNCT(0))
+#define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(0))
+#define P_SPI0_SSEL6	(P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(0))
+#define P_SPI0_SSEL7	(P_DEFINED | P_IDENT(GPIO_PC12) | P_FUNCT(0))
+
+#define P_SPI1_SS	(P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(3))
+#define P_SPI1_SCK	(P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(0))
+#define P_SPI1_MISO	(P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(0))
+#define P_SPI1_MOSI	(P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(0))
+#define P_SPI1_RDY	(P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0))
+#define P_SPI1_D2	(P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0))
+#define P_SPI1_D3	(P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0))
+
+#define P_SPI1_SSEL1	(P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(0))
+#define P_SPI1_SSEL2	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(2))
+#define P_SPI1_SSEL3	(P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(2))
+#define P_SPI1_SSEL4	(P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(2))
+#define P_SPI1_SSEL5	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0))
+#define P_SPI1_SSEL6	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0))
+#define P_SPI1_SSEL7	(P_DEFINED | P_IDENT(GPIO_PC14) | P_FUNCT(0))
+
+#define GPIO_DEFAULT_BOOT_SPI_CS
+#define P_DEFAULT_BOOT_SPI_CS
+
+/* CORE IDLE  */
+#define P_IDLEA		(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1))
+#define P_IDLEB		(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1))
+#define P_SLEEP		(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2))
+
+/* UART Port Mux */
+#define P_UART0_TX	(P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(1))
+#define P_UART0_RX	(P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(1))
+#define P_UART0_RTS	(P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(1))
+#define P_UART0_CTS	(P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(1))
+
+#define P_UART1_TX	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
+#define P_UART1_RX	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
+#define P_UART1_RTS	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0))
+#define P_UART1_CTS	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
+
+/* Timer */
+#define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(3))
+#define P_TMR0		(P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(2))
+#define P_TMR1		(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
+#define P_TMR2		(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(1))
+#define P_TMR3		(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1))
+#define P_TMR4		(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1))
+#define P_TMR5		(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1))
+#define P_TMR6		(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_TMR7		(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1))
+
+/* RSI */
+#define P_RSI_DATA0	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2))
+#define P_RSI_DATA1	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2))
+#define P_RSI_DATA2	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(2))
+#define P_RSI_DATA3	(P_DEFINED | P_IDENT(GPIO_PE15) | P_FUNCT(2))
+#define P_RSI_DATA4	(P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(2))
+#define P_RSI_DATA5	(P_DEFINED | P_IDENT(GPIO_PE12) | P_FUNCT(2))
+#define P_RSI_DATA6	(P_DEFINED | P_IDENT(GPIO_PE10) | P_FUNCT(2))
+#define P_RSI_DATA7	(P_DEFINED | P_IDENT(GPIO_PE11) | P_FUNCT(2))
+#define P_RSI_CMD	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1))
+#define P_RSI_CLK	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1))
+
+/* PTP */
+#define P_PTP0_PPS	(P_DEFINED | P_IDENT(GPIO_PB15) | P_FUNCT(0))
+#define P_PTP0_CLKIN	(P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(2))
+#define P_PTP0_AUXIN	(P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(2))
+
+#define P_PTP1_PPS	(P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0))
+#define P_PTP1_CLKIN	(P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(2))
+#define P_PTP1_AUXIN	(P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(2))
+
+/* SMC Port Mux */
+#define P_A3		(P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0))
+#define P_A4		(P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0))
+#define P_A5		(P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0))
+#define P_A6		(P_DEFINED | P_IDENT(GPIO_PA3) | P_FUNCT(0))
+#define P_A7		(P_DEFINED | P_IDENT(GPIO_PA4) | P_FUNCT(0))
+#define P_A8		(P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(0))
+#define P_A9		(P_DEFINED | P_IDENT(GPIO_PA6) | P_FUNCT(0))
+#define P_A10		(P_DEFINED | P_IDENT(GPIO_PA7) | P_FUNCT(0))
+#define P_A11		(P_DEFINED | P_IDENT(GPIO_PA8) | P_FUNCT(0))
+#define P_A12		(P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(0))
+#define P_A13		(P_DEFINED | P_IDENT(GPIO_PB2) | P_FUNCT(0))
+#define P_A14		(P_DEFINED | P_IDENT(GPIO_PA10) | P_FUNCT(0))
+#define P_A15		(P_DEFINED | P_IDENT(GPIO_PA11) | P_FUNCT(0))
+#define P_A16		(P_DEFINED | P_IDENT(GPIO_PB3) | P_FUNCT(0))
+#define P_A17		(P_DEFINED | P_IDENT(GPIO_PA12) | P_FUNCT(0))
+#define P_A18		(P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(0))
+#define P_A19		(P_DEFINED | P_IDENT(GPIO_PA14) | P_FUNCT(0))
+#define P_A20		(P_DEFINED | P_IDENT(GPIO_PA15) | P_FUNCT(0))
+#define P_A21		(P_DEFINED | P_IDENT(GPIO_PB6) | P_FUNCT(0))
+#define P_A22		(P_DEFINED | P_IDENT(GPIO_PB7) | P_FUNCT(0))
+#define P_A23		(P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(0))
+#define P_A24		(P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(0))
+#define P_A25		(P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(0))
+#define P_NORCK         (P_DEFINED | P_IDENT(GPIO_PB0) | P_FUNCT(0))
+
+#define P_AMS1		(P_DEFINED | P_IDENT(GPIO_PB1) | P_FUNCT(0))
+#define P_AMS2		(P_DEFINED | P_IDENT(GPIO_PB4) | P_FUNCT(0))
+#define P_AMS3		(P_DEFINED | P_IDENT(GPIO_PB5) | P_FUNCT(0))
+
+/* CAN */
+#define P_CAN0_TX	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2))
+#define P_CAN0_RX	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(2))
+
+/* SPORT */
+#define P_SPORT0_ACLK	(P_DEFINED | P_IDENT(GPIO_PB5) | P_FUNCT(2))
+#define P_SPORT0_AFS	(P_DEFINED | P_IDENT(GPIO_PB4) | P_FUNCT(2))
+#define P_SPORT0_AD0	(P_DEFINED | P_IDENT(GPIO_PB9) | P_FUNCT(2))
+#define P_SPORT0_AD1	(P_DEFINED | P_IDENT(GPIO_PB12) | P_FUNCT(2))
+#define P_SPORT0_ATDV	(P_DEFINED | P_IDENT(GPIO_PB6) | P_FUNCT(1))
+#define P_SPORT0_BCLK	(P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(2))
+#define P_SPORT0_BFS	(P_DEFINED | P_IDENT(GPIO_PB7) | P_FUNCT(2))
+#define P_SPORT0_BD0	(P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(2))
+#define P_SPORT0_BD1	(P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(2))
+#define P_SPORT0_BTDV	(P_DEFINED | P_IDENT(GPIO_PB12) | P_FUNCT(1))
+
+#define P_SPORT1_ACLK	(P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(2))
+#define P_SPORT1_AFS	(P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(2))
+#define P_SPORT1_AD0	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(2))
+#define P_SPORT1_AD1	(P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(2))
+#define P_SPORT1_ATDV	(P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(0))
+#define P_SPORT1_BCLK	(P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(2))
+#define P_SPORT1_BFS	(P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(2))
+#define P_SPORT1_BD0	(P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(2))
+#define P_SPORT1_BD1	(P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(2))
+#define P_SPORT1_BTDV	(P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(0))
+
+#define P_SPORT2_ACLK	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))
+#define P_SPORT2_AFS	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+#define P_SPORT2_AD0	(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0))
+#define P_SPORT2_AD1	(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0))
+#define P_SPORT2_ATDV	(P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(1))
+#define P_SPORT2_BCLK	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1))
+#define P_SPORT2_BFS	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0))
+#define P_SPORT2_BD0	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0))
+#define P_SPORT2_BD1	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0))
+#define P_SPORT2_BTDV	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2))
+
+/* LINK PORT */
+#define P_LP0_CLK	(P_DEFINED | P_IDENT(GPIO_PB0) | P_FUNCT(2))
+#define P_LP0_ACK       (P_DEFINED | P_IDENT(GPIO_PB1) | P_FUNCT(2))
+#define P_LP0_D0        (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(2))
+#define P_LP0_D1        (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(2))
+#define P_LP0_D2        (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(2))
+#define P_LP0_D3        (P_DEFINED | P_IDENT(GPIO_PA3) | P_FUNCT(2))
+#define P_LP0_D4        (P_DEFINED | P_IDENT(GPIO_PA4) | P_FUNCT(2))
+#define P_LP0_D5        (P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(2))
+#define P_LP0_D6        (P_DEFINED | P_IDENT(GPIO_PA6) | P_FUNCT(2))
+#define P_LP0_D7        (P_DEFINED | P_IDENT(GPIO_PA7) | P_FUNCT(2))
+
+#define P_LP1_CLK	(P_DEFINED | P_IDENT(GPIO_PB3) | P_FUNCT(2))
+#define P_LP1_ACK       (P_DEFINED | P_IDENT(GPIO_PB2) | P_FUNCT(2))
+#define P_LP1_D0        (P_DEFINED | P_IDENT(GPIO_PA8) | P_FUNCT(2))
+#define P_LP1_D1        (P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(2))
+#define P_LP1_D2        (P_DEFINED | P_IDENT(GPIO_PA10) | P_FUNCT(2))
+#define P_LP1_D3        (P_DEFINED | P_IDENT(GPIO_PA11) | P_FUNCT(2))
+#define P_LP1_D4        (P_DEFINED | P_IDENT(GPIO_PA12) | P_FUNCT(2))
+#define P_LP1_D5        (P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(2))
+#define P_LP1_D6        (P_DEFINED | P_IDENT(GPIO_PA14) | P_FUNCT(2))
+#define P_LP1_D7        (P_DEFINED | P_IDENT(GPIO_PA15) | P_FUNCT(2))
+
+#define P_LP2_CLK	(P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(2))
+#define P_LP2_ACK       (P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(2))
+#define P_LP2_D0        (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(2))
+#define P_LP2_D1        (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(2))
+#define P_LP2_D2        (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(2))
+#define P_LP2_D3        (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(2))
+#define P_LP2_D4        (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(2))
+#define P_LP2_D5        (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(2))
+#define P_LP2_D6        (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(2))
+#define P_LP2_D7        (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(2))
+
+#define P_LP3_CLK	(P_DEFINED | P_IDENT(GPIO_PE9) | P_FUNCT(2))
+#define P_LP3_ACK       (P_DEFINED | P_IDENT(GPIO_PE8) | P_FUNCT(2))
+#define P_LP3_D0        (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2))
+#define P_LP3_D1        (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(2))
+#define P_LP3_D2        (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(2))
+#define P_LP3_D3        (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(2))
+#define P_LP3_D4        (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(2))
+#define P_LP3_D5        (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(2))
+#define P_LP3_D6        (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(2))
+#define P_LP3_D7        (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(2))
+
+/* TWI */
+#define P_TWI0_SCL	(P_DONTCARE)
+#define P_TWI0_SDA	(P_DONTCARE)
+#define P_TWI1_SCL	(P_DONTCARE)
+#define P_TWI1_SDA	(P_DONTCARE)
+
+/* Rotary Encoder */
+#define P_CNT_CZM	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(3))
+#define P_CNT_CUD	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(3))
+#define P_CNT_CDG	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(3))
+
+#endif				/* _MACH_PORTMUX_H_ */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/ints-priority.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/ints-priority.c
new file mode 100644
index 0000000..f68abb9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/ints-priority.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ * Set up the interrupt priorities
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <asm/blackfin.h>
+
+u8 sec_int_priority[] = {
+	255,	/* IRQ_SEC_ERR */
+	255,	/* IRQ_CGU_EVT */
+	254,	/* IRQ_WATCH0 */
+	254,	/* IRQ_WATCH1 */
+	253,	/* IRQ_L2CTL0_ECC_ERR */
+	253,	/* IRQ_L2CTL0_ECC_WARN */
+	253,	/* IRQ_C0_DBL_FAULT */
+	253,	/* IRQ_C1_DBL_FAULT */
+	252,	/* IRQ_C0_HW_ERR */
+	252,	/* IRQ_C1_HW_ERR */
+	255,	/* IRQ_C0_NMI_L1_PARITY_ERR */
+	255,	/* IRQ_C1_NMI_L1_PARITY_ERR */
+
+	50,	/* IRQ_TIMER0 */
+	50,	/* IRQ_TIMER1 */
+	50,	/* IRQ_TIMER2 */
+	50,	/* IRQ_TIMER3 */
+	50,	/* IRQ_TIMER4 */
+	50,	/* IRQ_TIMER5 */
+	50,	/* IRQ_TIMER6 */
+	50,	/* IRQ_TIMER7 */
+	50,	/* IRQ_TIMER_STAT */
+	0,	/* IRQ_PINT0 */
+	0,	/* IRQ_PINT1 */
+	0,	/* IRQ_PINT2 */
+	0,	/* IRQ_PINT3 */
+	0,	/* IRQ_PINT4 */
+	0,	/* IRQ_PINT5 */
+	0,	/* IRQ_CNT */
+	50,	/* RQ_PWM0_TRIP */
+	50,	/* IRQ_PWM0_SYNC */
+	50,	/* IRQ_PWM1_TRIP */
+	50,	/* IRQ_PWM1_SYNC */
+	0,	/* IRQ_TWI0 */
+	0,	/* IRQ_TWI1 */
+	10,	/* IRQ_SOFT0 */
+	10,	/* IRQ_SOFT1 */
+	10,	/* IRQ_SOFT2 */
+	10,	/* IRQ_SOFT3 */
+	0,	/* IRQ_ACM_EVT_MISS */
+	0,	/* IRQ_ACM_EVT_COMPLETE */
+	0,	/* IRQ_CAN0_RX */
+	0,	/* IRQ_CAN0_TX */
+	0,	/* IRQ_CAN0_STAT */
+	100,	/* IRQ_SPORT0_TX */
+	100,	/* IRQ_SPORT0_TX_STAT */
+	100,	/* IRQ_SPORT0_RX */
+	100,	/* IRQ_SPORT0_RX_STAT */
+	100,	/* IRQ_SPORT1_TX */
+	100,	/* IRQ_SPORT1_TX_STAT */
+	100,	/* IRQ_SPORT1_RX */
+	100,	/* IRQ_SPORT1_RX_STAT */
+	100,	/* IRQ_SPORT2_TX */
+	100,	/* IRQ_SPORT2_TX_STAT */
+	100,	/* IRQ_SPORT2_RX */
+	100,	/* IRQ_SPORT2_RX_STAT */
+	0,	/* IRQ_SPI0_TX */
+	0,	/* IRQ_SPI0_RX */
+	0,	/* IRQ_SPI0_STAT */
+	0,	/* IRQ_SPI1_TX */
+	0,	/* IRQ_SPI1_RX */
+	0,	/* IRQ_SPI1_STAT */
+	0,	/* IRQ_RSI */
+	0,	/* IRQ_RSI_INT0 */
+	0,	/* IRQ_RSI_INT1 */
+	0,	/* DMA11 Data (SDU) */
+	0,	/* DMA12 Data (Reserved) */
+	0,	/* Reserved */
+	0,	/* Reserved */
+	30,	/* IRQ_EMAC0_STAT */
+	0,	/* EMAC0 Power (Reserved) */
+	30,	/* IRQ_EMAC1_STAT */
+	0,	/* EMAC1 Power (Reserved) */
+	0,	/* IRQ_LP0 */
+	0,	/* IRQ_LP0_STAT */
+	0,	/* IRQ_LP1 */
+	0,	/* IRQ_LP1_STAT */
+	0,	/* IRQ_LP2 */
+	0,	/* IRQ_LP2_STAT */
+	0,	/* IRQ_LP3 */
+	0,	/* IRQ_LP3_STAT */
+	0,	/* IRQ_UART0_TX */
+	0,	/* IRQ_UART0_RX */
+	0,	/* IRQ_UART0_STAT */
+	0,	/* IRQ_UART1_TX */
+	0,	/* IRQ_UART1_RX */
+	0,	/* IRQ_UART1_STAT */
+	0,	/* IRQ_MDMA0_SRC_CRC0 */
+	0,	/* IRQ_MDMA0_DEST_CRC0 */
+	0,	/* IRQ_CRC0_DCNTEXP */
+	0,	/* IRQ_CRC0_ERR */
+	0,	/* IRQ_MDMA1_SRC_CRC1 */
+	0,	/* IRQ_MDMA1_DEST_CRC1 */
+	0,	/* IRQ_CRC1_DCNTEXP */
+	0,	/* IRQ_CRC1_ERR */
+	0,	/* IRQ_MDMA2_SRC */
+	0,	/* IRQ_MDMA2_DEST */
+	0,	/* IRQ_MDMA3_SRC */
+	0,	/* IRQ_MDMA3_DEST */
+	120,	/* IRQ_EPPI0_CH0 */
+	120,	/* IRQ_EPPI0_CH1 */
+	120,	/* IRQ_EPPI0_STAT */
+	120,	/* IRQ_EPPI2_CH0 */
+	120,	/* IRQ_EPPI2_CH1 */
+	120,	/* IRQ_EPPI2_STAT */
+	120,	/* IRQ_EPPI1_CH0 */
+	120,	/* IRQ_EPPI1_CH1 */
+	120,	/* IRQ_EPPI1_STAT */
+	120,	/* IRQ_PIXC_CH0 */
+	120,	/* IRQ_PIXC_CH1 */
+	120,	/* IRQ_PIXC_CH2 */
+	120,	/* IRQ_PIXC_STAT */
+	120,	/* IRQ_PVP_CPDOB */
+	120,	/* IRQ_PVP_CPDOC */
+	120,	/* IRQ_PVP_CPSTAT */
+	120,	/* IRQ_PVP_CPCI */
+	120,	/* IRQ_PVP_STAT0 */
+	120,	/* IRQ_PVP_MPDO */
+	120,	/* IRQ_PVP_MPDI */
+	120,	/* IRQ_PVP_MPSTAT */
+	120,	/* IRQ_PVP_MPCI */
+	120,	/* IRQ_PVP_CPDOA */
+	120,	/* IRQ_PVP_STAT1 */
+	0,	/* IRQ_USB_STAT */
+	0,	/* IRQ_USB_DMA */
+	0,	/* IRQ_TRU_INT0 */
+	0,	/* IRQ_TRU_INT1 */
+	0,	/* IRQ_TRU_INT2	*/
+	0,	/* IRQ_TRU_INT3 */
+	0,	/* IRQ_DMAC0_ERROR */
+	0,	/* IRQ_CGU0_ERROR */
+	0,	/* Reserved */
+	0,	/* IRQ_DPM */
+	0,	/* Reserved */
+	0,	/* IRQ_SWU0 */
+	0,	/* IRQ_SWU1 */
+	0,	/* IRQ_SWU2 */
+	0,	/* IRQ_SWU3 */
+	0,	/* IRQ_SWU4 */
+	0,	/* IRQ_SWU4 */
+	0,	/* IRQ_SWU6 */
+};
+
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/pm.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/pm.c
new file mode 100644
index 0000000..b1bfcf4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/pm.c
@@ -0,0 +1,361 @@
+/*
+ * Blackfin bf609 power management
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2
+ */
+
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/syscore_ops.h>
+
+#include <asm/dpmc.h>
+#include <asm/pm.h>
+#include <mach/pm.h>
+#include <asm/blackfin.h>
+#include <asm/mem_init.h>
+
+/***********************************************************/
+/*                                                         */
+/* Wakeup Actions for DPM_RESTORE                          */
+/*                                                         */
+/***********************************************************/
+#define BITP_ROM_WUA_CHKHDR             24
+#define BITP_ROM_WUA_DDRLOCK            7
+#define BITP_ROM_WUA_DDRDLLEN           6
+#define BITP_ROM_WUA_DDR                5
+#define BITP_ROM_WUA_CGU                4
+#define BITP_ROM_WUA_MEMBOOT            2
+#define BITP_ROM_WUA_EN                 1
+
+#define BITM_ROM_WUA_CHKHDR             (0xFF000000)
+#define ENUM_ROM_WUA_CHKHDR_AD                  0xAD000000
+
+#define BITM_ROM_WUA_DDRLOCK            (0x00000080)
+#define BITM_ROM_WUA_DDRDLLEN           (0x00000040)
+#define BITM_ROM_WUA_DDR                (0x00000020)
+#define BITM_ROM_WUA_CGU                (0x00000010)
+#define BITM_ROM_WUA_MEMBOOT            (0x00000002)
+#define BITM_ROM_WUA_EN                 (0x00000001)
+
+/***********************************************************/
+/*                                                         */
+/* Syscontrol                                              */
+/*                                                         */
+/***********************************************************/
+#define BITP_ROM_SYSCTRL_CGU_LOCKINGEN  28    /* unlocks CGU_CTL register */
+#define BITP_ROM_SYSCTRL_WUA_OVERRIDE   24
+#define BITP_ROM_SYSCTRL_WUA_DDRDLLEN   20    /* Saves the DDR DLL and PADS registers to the DPM registers */
+#define BITP_ROM_SYSCTRL_WUA_DDR        19    /* Saves the DDR registers to the DPM registers */
+#define BITP_ROM_SYSCTRL_WUA_CGU        18    /* Saves the CGU registers into DPM registers */
+#define BITP_ROM_SYSCTRL_WUA_DPMWRITE   17    /* Saves the Syscontrol structure structure contents into DPM registers */
+#define BITP_ROM_SYSCTRL_WUA_EN         16    /* reads current PLL and DDR configuration into structure */
+#define BITP_ROM_SYSCTRL_DDR_WRITE      13    /* writes the DDR registers from Syscontrol structure for wakeup initialization of DDR */
+#define BITP_ROM_SYSCTRL_DDR_READ       12    /* Read the DDR registers into the Syscontrol structure for storing prior to hibernate */
+#define BITP_ROM_SYSCTRL_CGU_AUTODIS    11    /* Disables auto handling of UPDT and ALGN fields */
+#define BITP_ROM_SYSCTRL_CGU_CLKOUTSEL  7    /* access CGU_CLKOUTSEL register */
+#define BITP_ROM_SYSCTRL_CGU_DIV        6    /* access CGU_DIV register */
+#define BITP_ROM_SYSCTRL_CGU_STAT       5    /* access CGU_STAT register */
+#define BITP_ROM_SYSCTRL_CGU_CTL        4    /* access CGU_CTL register */
+#define BITP_ROM_SYSCTRL_CGU_RTNSTAT    2    /* Update structure STAT field upon error */
+#define BITP_ROM_SYSCTRL_WRITE          1    /* write registers */
+#define BITP_ROM_SYSCTRL_READ           0    /* read registers */
+
+#define BITM_ROM_SYSCTRL_CGU_READ       (0x00000001)    /* Read CGU registers */
+#define BITM_ROM_SYSCTRL_CGU_WRITE      (0x00000002)    /* Write registers */
+#define BITM_ROM_SYSCTRL_CGU_RTNSTAT    (0x00000004)    /* Update structure STAT field upon error or after a write operation */
+#define BITM_ROM_SYSCTRL_CGU_CTL        (0x00000010)    /* Access CGU_CTL register */
+#define BITM_ROM_SYSCTRL_CGU_STAT       (0x00000020)    /* Access CGU_STAT register */
+#define BITM_ROM_SYSCTRL_CGU_DIV        (0x00000040)    /* Access CGU_DIV register */
+#define BITM_ROM_SYSCTRL_CGU_CLKOUTSEL  (0x00000080)    /* Access CGU_CLKOUTSEL register */
+#define BITM_ROM_SYSCTRL_CGU_AUTODIS    (0x00000800)    /* Disables auto handling of UPDT and ALGN fields */
+#define BITM_ROM_SYSCTRL_DDR_READ       (0x00001000)    /* Reads the contents of the DDR registers and stores them into the structure */
+#define BITM_ROM_SYSCTRL_DDR_WRITE      (0x00002000)    /* Writes the DDR registers from the structure, only really intented for wakeup functionality and not for full DDR configuration */
+#define BITM_ROM_SYSCTRL_WUA_EN         (0x00010000)    /* Wakeup entry or exit opertation enable */
+#define BITM_ROM_SYSCTRL_WUA_DPMWRITE   (0x00020000)    /* When set indicates a restore of the PLL and DDR is to be performed otherwise a save is required */
+#define BITM_ROM_SYSCTRL_WUA_CGU        (0x00040000)    /* Only applicable for a PLL and DDR save operation to the DPM, saves the current settings if cleared or the contents of the structure if set */
+#define BITM_ROM_SYSCTRL_WUA_DDR        (0x00080000)    /* Only applicable for a PLL and DDR save operation to the DPM, saves the current settings if cleared or the contents of the structure if set */
+#define BITM_ROM_SYSCTRL_WUA_DDRDLLEN   (0x00100000)    /* Enables saving/restoring of the DDR DLLCTL register */
+#define BITM_ROM_SYSCTRL_WUA_OVERRIDE   (0x01000000)
+#define BITM_ROM_SYSCTRL_CGU_LOCKINGEN  (0x10000000)    /* Unlocks the CGU_CTL register */
+
+
+/* Structures for the syscontrol() function */
+struct STRUCT_ROM_SYSCTRL {
+	uint32_t ulCGU_CTL;
+	uint32_t ulCGU_STAT;
+	uint32_t ulCGU_DIV;
+	uint32_t ulCGU_CLKOUTSEL;
+	uint32_t ulWUA_Flags;
+	uint32_t ulWUA_BootAddr;
+	uint32_t ulWUA_User;
+	uint32_t ulDDR_CTL;
+	uint32_t ulDDR_CFG;
+	uint32_t ulDDR_TR0;
+	uint32_t ulDDR_TR1;
+	uint32_t ulDDR_TR2;
+	uint32_t ulDDR_MR;
+	uint32_t ulDDR_EMR1;
+	uint32_t ulDDR_EMR2;
+	uint32_t ulDDR_PADCTL;
+	uint32_t ulDDR_DLLCTL;
+	uint32_t ulReserved;
+};
+
+struct bfin_pm_data {
+	uint32_t magic;
+	uint32_t resume_addr;
+	uint32_t sp;
+};
+
+struct bfin_pm_data bf609_pm_data;
+
+struct STRUCT_ROM_SYSCTRL configvalues;
+uint32_t dactionflags;
+
+#define FUNC_ROM_SYSCONTROL 0xC8000080
+__attribute__((l1_data))
+static uint32_t (* const bfrom_SysControl)(uint32_t action_flags, struct STRUCT_ROM_SYSCTRL *settings, void *reserved) = (void *)FUNC_ROM_SYSCONTROL;
+
+__attribute__((l1_text))
+void bfin_cpu_suspend(void)
+{
+	__asm__ __volatile__( \
+			".align 8;" \
+			"idle;" \
+			: : \
+			);
+}
+
+__attribute__((l1_text))
+void bf609_ddr_sr(void)
+{
+	dmc_enter_self_refresh();
+}
+
+__attribute__((l1_text))
+void bf609_ddr_sr_exit(void)
+{
+	dmc_exit_self_refresh();
+
+	/* After wake up from deep sleep and exit DDR from self refress mode,
+	 * should wait till CGU PLL is locked.
+	 */
+	while (bfin_read32(CGU0_STAT) & CLKSALGN)
+		continue;
+}
+
+__attribute__((l1_text))
+void bf609_resume_ccbuf(void)
+{
+	bfin_write32(DPM0_CCBF_EN, 3);
+	bfin_write32(DPM0_CTL, 2);
+
+	while ((bfin_read32(DPM0_STAT) & 0xf) != 1);
+}
+
+__attribute__((l1_text))
+void bfin_hibernate_syscontrol(void)
+{
+	configvalues.ulWUA_Flags = (0xAD000000 | BITM_ROM_WUA_EN
+		| BITM_ROM_WUA_CGU | BITM_ROM_WUA_DDR | BITM_ROM_WUA_DDRDLLEN);
+
+	dactionflags = (BITM_ROM_SYSCTRL_WUA_EN
+		| BITM_ROM_SYSCTRL_WUA_DPMWRITE | BITM_ROM_SYSCTRL_WUA_CGU
+		| BITM_ROM_SYSCTRL_WUA_DDR | BITM_ROM_SYSCTRL_WUA_DDRDLLEN);
+
+	bfrom_SysControl(dactionflags, &configvalues, NULL);
+
+	bfin_write32(DPM0_RESTORE5, bfin_read32(DPM0_RESTORE5) | 4);
+}
+
+asmlinkage void enter_deepsleep(void);
+
+__attribute__((l1_text))
+void bfin_deepsleep(unsigned long mask, unsigned long pol_mask)
+{
+	bfin_write32(DPM0_WAKE_EN, mask);
+	bfin_write32(DPM0_WAKE_POL, pol_mask);
+	SSYNC();
+	enter_deepsleep();
+}
+
+void bfin_hibernate(unsigned long mask, unsigned long pol_mask)
+{
+	bfin_write32(DPM0_WAKE_EN, mask);
+	bfin_write32(DPM0_WAKE_POL, pol_mask);
+	bfin_write32(DPM0_PGCNTR, 0x0000FFFF);
+	bfin_write32(DPM0_HIB_DIS, 0xFFFF);
+
+	bf609_hibernate();
+}
+
+void bf609_cpu_pm_enter(suspend_state_t state)
+{
+	int error;
+	unsigned long wakeup = 0;
+	unsigned long wakeup_pol = 0;
+
+#ifdef CONFIG_PM_BFIN_WAKE_PA15
+	wakeup |= PA15WE;
+# if CONFIG_PM_BFIN_WAKE_PA15_POL
+	wakeup_pol |= PA15WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PB15
+	wakeup |= PB15WE;
+# if CONFIG_PM_BFIN_WAKE_PB15_POL
+	wakeup_pol |= PB15WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PC15
+	wakeup |= PC15WE;
+# if CONFIG_PM_BFIN_WAKE_PC15_POL
+	wakeup_pol |= PC15WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PD06
+	wakeup |= PD06WE;
+# if CONFIG_PM_BFIN_WAKE_PD06_POL
+	wakeup_pol |= PD06WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PE12
+	wakeup |= PE12WE;
+# if CONFIG_PM_BFIN_WAKE_PE12_POL
+	wakeup_pol |= PE12WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PG04
+	wakeup |= PG04WE;
+# if CONFIG_PM_BFIN_WAKE_PG04_POL
+	wakeup_pol |= PG04WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PG13
+	wakeup |= PG13WE;
+# if CONFIG_PM_BFIN_WAKE_PG13_POL
+	wakeup_pol |= PG13WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_USB
+	wakeup |= USBWE;
+# if CONFIG_PM_BFIN_WAKE_USB_POL
+	wakeup_pol |= USBWE;
+# endif
+#endif
+
+	error = irq_set_irq_wake(255, 1);
+	if(error < 0)
+		printk(KERN_DEBUG "Unable to get irq wake\n");
+	error = irq_set_irq_wake(231, 1);
+	if (error < 0)
+		printk(KERN_DEBUG "Unable to get irq wake\n");
+
+	if (state == PM_SUSPEND_STANDBY)
+		bfin_deepsleep(wakeup, wakeup_pol);
+	else {
+		bfin_hibernate(wakeup, wakeup_pol);
+	}
+
+}
+
+int bf609_cpu_pm_prepare(void)
+{
+	return 0;
+}
+
+void bf609_cpu_pm_finish(void)
+{
+
+}
+
+static struct bfin_cpu_pm_fns bf609_cpu_pm = {
+	.enter          = bf609_cpu_pm_enter,
+	.prepare        = bf609_cpu_pm_prepare,
+	.finish         = bf609_cpu_pm_finish,
+};
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static int smc_pm_syscore_suspend(void)
+{
+	bf609_nor_flash_exit(NULL);
+	return 0;
+}
+
+static void smc_pm_syscore_resume(void)
+{
+	bf609_nor_flash_init(NULL);
+}
+
+static struct syscore_ops smc_pm_syscore_ops = {
+	.suspend        = smc_pm_syscore_suspend,
+	.resume         = smc_pm_syscore_resume,
+};
+#endif
+
+static irqreturn_t test_isr(int irq, void *dev_id)
+{
+	printk(KERN_DEBUG "gpio irq %d\n", irq);
+	if (irq == 231)
+		bfin_sec_raise_irq(BFIN_SYSIRQ(IRQ_SOFT1));
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t dpm0_isr(int irq, void *dev_id)
+{
+	bfin_write32(DPM0_WAKE_STAT, bfin_read32(DPM0_WAKE_STAT));
+	bfin_write32(CGU0_STAT, bfin_read32(CGU0_STAT));
+	return IRQ_HANDLED;
+}
+
+static int __init bf609_init_pm(void)
+{
+	int irq;
+	int error;
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	register_syscore_ops(&smc_pm_syscore_ops);
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PE12
+	irq = gpio_to_irq(GPIO_PE12);
+	if (irq < 0) {
+		error = irq;
+		printk(KERN_DEBUG "Unable to get irq number for GPIO %d, error %d\n",
+				GPIO_PE12, error);
+	}
+
+	error = request_irq(irq, test_isr, IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND
+				| IRQF_FORCE_RESUME, "gpiope12", NULL);
+	if(error < 0)
+		printk(KERN_DEBUG "Unable to get irq\n");
+#endif
+
+	error = request_irq(IRQ_CGU_EVT, dpm0_isr, IRQF_NO_SUSPEND |
+				IRQF_FORCE_RESUME, "cgu0 event", NULL);
+	if(error < 0)
+		printk(KERN_DEBUG "Unable to get irq\n");
+
+	error = request_irq(IRQ_DPM, dpm0_isr, IRQF_NO_SUSPEND |
+				IRQF_FORCE_RESUME, "dpm0 event", NULL);
+	if (error < 0)
+		printk(KERN_DEBUG "Unable to get irq\n");
+
+	bfin_cpu_pm = &bf609_cpu_pm;
+	return 0;
+}
+
+late_initcall(bf609_init_pm);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/scb.c b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/scb.c
new file mode 100644
index 0000000..ac1f07c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-bf609/scb.c
@@ -0,0 +1,363 @@
+/*
+ * arch/blackfin/mach-common/scb-init.c - reprogram system cross bar priority
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <asm/blackfin.h>
+#include <asm/scb.h>
+
+struct scb_mi_prio scb_data[] = {
+#ifdef CONFIG_SCB0_MI0
+	{ REG_SCB0_ARBR0, REG_SCB0_ARBW0, 32, {
+		CONFIG_SCB0_MI0_SLOT0,
+		CONFIG_SCB0_MI0_SLOT1,
+		CONFIG_SCB0_MI0_SLOT2,
+		CONFIG_SCB0_MI0_SLOT3,
+		CONFIG_SCB0_MI0_SLOT4,
+		CONFIG_SCB0_MI0_SLOT5,
+		CONFIG_SCB0_MI0_SLOT6,
+		CONFIG_SCB0_MI0_SLOT7,
+		CONFIG_SCB0_MI0_SLOT8,
+		CONFIG_SCB0_MI0_SLOT9,
+		CONFIG_SCB0_MI0_SLOT10,
+		CONFIG_SCB0_MI0_SLOT11,
+		CONFIG_SCB0_MI0_SLOT12,
+		CONFIG_SCB0_MI0_SLOT13,
+		CONFIG_SCB0_MI0_SLOT14,
+		CONFIG_SCB0_MI0_SLOT15,
+		CONFIG_SCB0_MI0_SLOT16,
+		CONFIG_SCB0_MI0_SLOT17,
+		CONFIG_SCB0_MI0_SLOT18,
+		CONFIG_SCB0_MI0_SLOT19,
+		CONFIG_SCB0_MI0_SLOT20,
+		CONFIG_SCB0_MI0_SLOT21,
+		CONFIG_SCB0_MI0_SLOT22,
+		CONFIG_SCB0_MI0_SLOT23,
+		CONFIG_SCB0_MI0_SLOT24,
+		CONFIG_SCB0_MI0_SLOT25,
+		CONFIG_SCB0_MI0_SLOT26,
+		CONFIG_SCB0_MI0_SLOT27,
+		CONFIG_SCB0_MI0_SLOT28,
+		CONFIG_SCB0_MI0_SLOT29,
+		CONFIG_SCB0_MI0_SLOT30,
+		CONFIG_SCB0_MI0_SLOT31
+		},
+	},
+#endif
+#ifdef CONFIG_SCB0_MI1
+	{ REG_SCB0_ARBR1, REG_SCB0_ARBW1, 32, {
+		CONFIG_SCB0_MI1_SLOT0,
+		CONFIG_SCB0_MI1_SLOT1,
+		CONFIG_SCB0_MI1_SLOT2,
+		CONFIG_SCB0_MI1_SLOT3,
+		CONFIG_SCB0_MI1_SLOT4,
+		CONFIG_SCB0_MI1_SLOT5,
+		CONFIG_SCB0_MI1_SLOT6,
+		CONFIG_SCB0_MI1_SLOT7,
+		CONFIG_SCB0_MI1_SLOT8,
+		CONFIG_SCB0_MI1_SLOT9,
+		CONFIG_SCB0_MI1_SLOT10,
+		CONFIG_SCB0_MI1_SLOT11,
+		CONFIG_SCB0_MI1_SLOT12,
+		CONFIG_SCB0_MI1_SLOT13,
+		CONFIG_SCB0_MI1_SLOT14,
+		CONFIG_SCB0_MI1_SLOT15,
+		CONFIG_SCB0_MI1_SLOT16,
+		CONFIG_SCB0_MI1_SLOT17,
+		CONFIG_SCB0_MI1_SLOT18,
+		CONFIG_SCB0_MI1_SLOT19,
+		CONFIG_SCB0_MI1_SLOT20,
+		CONFIG_SCB0_MI1_SLOT21,
+		CONFIG_SCB0_MI1_SLOT22,
+		CONFIG_SCB0_MI1_SLOT23,
+		CONFIG_SCB0_MI1_SLOT24,
+		CONFIG_SCB0_MI1_SLOT25,
+		CONFIG_SCB0_MI1_SLOT26,
+		CONFIG_SCB0_MI1_SLOT27,
+		CONFIG_SCB0_MI1_SLOT28,
+		CONFIG_SCB0_MI1_SLOT29,
+		CONFIG_SCB0_MI1_SLOT30,
+		CONFIG_SCB0_MI1_SLOT31
+		},
+	},
+#endif
+#ifdef CONFIG_SCB0_MI2
+	{ REG_SCB0_ARBR2, REG_SCB0_ARBW2, 32, {
+		CONFIG_SCB0_MI2_SLOT0,
+		CONFIG_SCB0_MI2_SLOT1,
+		CONFIG_SCB0_MI2_SLOT2,
+		CONFIG_SCB0_MI2_SLOT3,
+		CONFIG_SCB0_MI2_SLOT4,
+		CONFIG_SCB0_MI2_SLOT5,
+		CONFIG_SCB0_MI2_SLOT6,
+		CONFIG_SCB0_MI2_SLOT7,
+		CONFIG_SCB0_MI2_SLOT8,
+		CONFIG_SCB0_MI2_SLOT9,
+		CONFIG_SCB0_MI2_SLOT10,
+		CONFIG_SCB0_MI2_SLOT11,
+		CONFIG_SCB0_MI2_SLOT12,
+		CONFIG_SCB0_MI2_SLOT13,
+		CONFIG_SCB0_MI2_SLOT14,
+		CONFIG_SCB0_MI2_SLOT15,
+		CONFIG_SCB0_MI2_SLOT16,
+		CONFIG_SCB0_MI2_SLOT17,
+		CONFIG_SCB0_MI2_SLOT18,
+		CONFIG_SCB0_MI2_SLOT19,
+		CONFIG_SCB0_MI2_SLOT20,
+		CONFIG_SCB0_MI2_SLOT21,
+		CONFIG_SCB0_MI2_SLOT22,
+		CONFIG_SCB0_MI2_SLOT23,
+		CONFIG_SCB0_MI2_SLOT24,
+		CONFIG_SCB0_MI2_SLOT25,
+		CONFIG_SCB0_MI2_SLOT26,
+		CONFIG_SCB0_MI2_SLOT27,
+		CONFIG_SCB0_MI2_SLOT28,
+		CONFIG_SCB0_MI2_SLOT29,
+		CONFIG_SCB0_MI2_SLOT30,
+		CONFIG_SCB0_MI2_SLOT31
+		},
+	},
+#endif
+#ifdef CONFIG_SCB0_MI3
+	{ REG_SCB0_ARBR3, REG_SCB0_ARBW3, 32, {
+		CONFIG_SCB0_MI3_SLOT0,
+		CONFIG_SCB0_MI3_SLOT1,
+		CONFIG_SCB0_MI3_SLOT2,
+		CONFIG_SCB0_MI3_SLOT3,
+		CONFIG_SCB0_MI3_SLOT4,
+		CONFIG_SCB0_MI3_SLOT5,
+		CONFIG_SCB0_MI3_SLOT6,
+		CONFIG_SCB0_MI3_SLOT7,
+		CONFIG_SCB0_MI3_SLOT8,
+		CONFIG_SCB0_MI3_SLOT9,
+		CONFIG_SCB0_MI3_SLOT10,
+		CONFIG_SCB0_MI3_SLOT11,
+		CONFIG_SCB0_MI3_SLOT12,
+		CONFIG_SCB0_MI3_SLOT13,
+		CONFIG_SCB0_MI3_SLOT14,
+		CONFIG_SCB0_MI3_SLOT15,
+		CONFIG_SCB0_MI3_SLOT16,
+		CONFIG_SCB0_MI3_SLOT17,
+		CONFIG_SCB0_MI3_SLOT18,
+		CONFIG_SCB0_MI3_SLOT19,
+		CONFIG_SCB0_MI3_SLOT20,
+		CONFIG_SCB0_MI3_SLOT21,
+		CONFIG_SCB0_MI3_SLOT22,
+		CONFIG_SCB0_MI3_SLOT23,
+		CONFIG_SCB0_MI3_SLOT24,
+		CONFIG_SCB0_MI3_SLOT25,
+		CONFIG_SCB0_MI3_SLOT26,
+		CONFIG_SCB0_MI3_SLOT27,
+		CONFIG_SCB0_MI3_SLOT28,
+		CONFIG_SCB0_MI3_SLOT29,
+		CONFIG_SCB0_MI3_SLOT30,
+		CONFIG_SCB0_MI3_SLOT31
+		},
+	},
+#endif
+#ifdef CONFIG_SCB0_MI4
+	{ REG_SCB0_ARBR4, REG_SCB4_ARBW0, 32, {
+		CONFIG_SCB0_MI4_SLOT0,
+		CONFIG_SCB0_MI4_SLOT1,
+		CONFIG_SCB0_MI4_SLOT2,
+		CONFIG_SCB0_MI4_SLOT3,
+		CONFIG_SCB0_MI4_SLOT4,
+		CONFIG_SCB0_MI4_SLOT5,
+		CONFIG_SCB0_MI4_SLOT6,
+		CONFIG_SCB0_MI4_SLOT7,
+		CONFIG_SCB0_MI4_SLOT8,
+		CONFIG_SCB0_MI4_SLOT9,
+		CONFIG_SCB0_MI4_SLOT10,
+		CONFIG_SCB0_MI4_SLOT11,
+		CONFIG_SCB0_MI4_SLOT12,
+		CONFIG_SCB0_MI4_SLOT13,
+		CONFIG_SCB0_MI4_SLOT14,
+		CONFIG_SCB0_MI4_SLOT15,
+		CONFIG_SCB0_MI4_SLOT16,
+		CONFIG_SCB0_MI4_SLOT17,
+		CONFIG_SCB0_MI4_SLOT18,
+		CONFIG_SCB0_MI4_SLOT19,
+		CONFIG_SCB0_MI4_SLOT20,
+		CONFIG_SCB0_MI4_SLOT21,
+		CONFIG_SCB0_MI4_SLOT22,
+		CONFIG_SCB0_MI4_SLOT23,
+		CONFIG_SCB0_MI4_SLOT24,
+		CONFIG_SCB0_MI4_SLOT25,
+		CONFIG_SCB0_MI4_SLOT26,
+		CONFIG_SCB0_MI4_SLOT27,
+		CONFIG_SCB0_MI4_SLOT28,
+		CONFIG_SCB0_MI4_SLOT29,
+		CONFIG_SCB0_MI4_SLOT30,
+		CONFIG_SCB0_MI4_SLOT31
+		},
+	},
+#endif
+#ifdef CONFIG_SCB0_MI5
+	{ REG_SCB0_ARBR5, REG_SCB0_ARBW5, 16, {
+		CONFIG_SCB0_MI5_SLOT0,
+		CONFIG_SCB0_MI5_SLOT1,
+		CONFIG_SCB0_MI5_SLOT2,
+		CONFIG_SCB0_MI5_SLOT3,
+		CONFIG_SCB0_MI5_SLOT4,
+		CONFIG_SCB0_MI5_SLOT5,
+		CONFIG_SCB0_MI5_SLOT6,
+		CONFIG_SCB0_MI5_SLOT7,
+		CONFIG_SCB0_MI5_SLOT8,
+		CONFIG_SCB0_MI5_SLOT9,
+		CONFIG_SCB0_MI5_SLOT10,
+		CONFIG_SCB0_MI5_SLOT11,
+		CONFIG_SCB0_MI5_SLOT12,
+		CONFIG_SCB0_MI5_SLOT13,
+		CONFIG_SCB0_MI5_SLOT14,
+		CONFIG_SCB0_MI5_SLOT15
+		},
+	},
+#endif
+#ifdef CONFIG_SCB1_MI0
+	{ REG_SCB1_ARBR0, REG_SCB1_ARBW0, 20, {
+		CONFIG_SCB1_MI0_SLOT0,
+		CONFIG_SCB1_MI0_SLOT1,
+		CONFIG_SCB1_MI0_SLOT2,
+		CONFIG_SCB1_MI0_SLOT3,
+		CONFIG_SCB1_MI0_SLOT4,
+		CONFIG_SCB1_MI0_SLOT5,
+		CONFIG_SCB1_MI0_SLOT6,
+		CONFIG_SCB1_MI0_SLOT7,
+		CONFIG_SCB1_MI0_SLOT8,
+		CONFIG_SCB1_MI0_SLOT9,
+		CONFIG_SCB1_MI0_SLOT10,
+		CONFIG_SCB1_MI0_SLOT11,
+		CONFIG_SCB1_MI0_SLOT12,
+		CONFIG_SCB1_MI0_SLOT13,
+		CONFIG_SCB1_MI0_SLOT14,
+		CONFIG_SCB1_MI0_SLOT15,
+		CONFIG_SCB1_MI0_SLOT16,
+		CONFIG_SCB1_MI0_SLOT17,
+		CONFIG_SCB1_MI0_SLOT18,
+		CONFIG_SCB1_MI0_SLOT19
+		},
+	},
+#endif
+#ifdef CONFIG_SCB2_MI0
+	{ REG_SCB2_ARBR0, REG_SCB2_ARBW0, 10, {
+		CONFIG_SCB2_MI0_SLOT0,
+		CONFIG_SCB2_MI0_SLOT1,
+		CONFIG_SCB2_MI0_SLOT2,
+		CONFIG_SCB2_MI0_SLOT3,
+		CONFIG_SCB2_MI0_SLOT4,
+		CONFIG_SCB2_MI0_SLOT5,
+		CONFIG_SCB2_MI0_SLOT6,
+		CONFIG_SCB2_MI0_SLOT7,
+		CONFIG_SCB2_MI0_SLOT8,
+		CONFIG_SCB2_MI0_SLOT9
+		},
+	},
+#endif
+#ifdef CONFIG_SCB3_MI0
+	{ REG_SCB3_ARBR0, REG_SCB3_ARBW0, 16, {
+		CONFIG_SCB3_MI0_SLOT0,
+		CONFIG_SCB3_MI0_SLOT1,
+		CONFIG_SCB3_MI0_SLOT2,
+		CONFIG_SCB3_MI0_SLOT3,
+		CONFIG_SCB3_MI0_SLOT4,
+		CONFIG_SCB3_MI0_SLOT5,
+		CONFIG_SCB3_MI0_SLOT6,
+		CONFIG_SCB3_MI0_SLOT7,
+		CONFIG_SCB3_MI0_SLOT8,
+		CONFIG_SCB3_MI0_SLOT9,
+		CONFIG_SCB3_MI0_SLOT10,
+		CONFIG_SCB3_MI0_SLOT11,
+		CONFIG_SCB3_MI0_SLOT12,
+		CONFIG_SCB3_MI0_SLOT13,
+		CONFIG_SCB3_MI0_SLOT14,
+		CONFIG_SCB3_MI0_SLOT15
+		},
+	},
+#endif
+#ifdef CONFIG_SCB4_MI0
+	{ REG_SCB4_ARBR0, REG_SCB4_ARBW0, 16, {
+		CONFIG_SCB4_MI0_SLOT0,
+		CONFIG_SCB4_MI0_SLOT1,
+		CONFIG_SCB4_MI0_SLOT2,
+		CONFIG_SCB4_MI0_SLOT3,
+		CONFIG_SCB4_MI0_SLOT4,
+		CONFIG_SCB4_MI0_SLOT5,
+		CONFIG_SCB4_MI0_SLOT6,
+		CONFIG_SCB4_MI0_SLOT7,
+		CONFIG_SCB4_MI0_SLOT8,
+		CONFIG_SCB4_MI0_SLOT9,
+		CONFIG_SCB4_MI0_SLOT10,
+		CONFIG_SCB4_MI0_SLOT11,
+		CONFIG_SCB4_MI0_SLOT12,
+		CONFIG_SCB4_MI0_SLOT13,
+		CONFIG_SCB4_MI0_SLOT14,
+		CONFIG_SCB4_MI0_SLOT15
+		},
+	},
+#endif
+#ifdef CONFIG_SCB5_MI0
+	{ REG_SCB5_ARBR0, REG_SCB5_ARBW0, 8, {
+		CONFIG_SCB5_MI0_SLOT0,
+		CONFIG_SCB5_MI0_SLOT1,
+		CONFIG_SCB5_MI0_SLOT2,
+		CONFIG_SCB5_MI0_SLOT3,
+		CONFIG_SCB5_MI0_SLOT4,
+		CONFIG_SCB5_MI0_SLOT5,
+		CONFIG_SCB5_MI0_SLOT6,
+		CONFIG_SCB5_MI0_SLOT7
+		},
+	},
+#endif
+#ifdef CONFIG_SCB6_MI0
+	{ REG_SCB6_ARBR0, REG_SCB6_ARBW0, 4, {
+		CONFIG_SCB6_MI0_SLOT0,
+		CONFIG_SCB6_MI0_SLOT1,
+		CONFIG_SCB6_MI0_SLOT2,
+		CONFIG_SCB6_MI0_SLOT3
+		},
+	},
+#endif
+#ifdef CONFIG_SCB7_MI0
+	{ REG_SCB7_ARBR0, REG_SCB7_ARBW0, 6, {
+		CONFIG_SCB7_MI0_SLOT0,
+		CONFIG_SCB7_MI0_SLOT1,
+		CONFIG_SCB7_MI0_SLOT2,
+		CONFIG_SCB7_MI0_SLOT3,
+		CONFIG_SCB7_MI0_SLOT4,
+		CONFIG_SCB7_MI0_SLOT5
+		},
+	},
+#endif
+#ifdef CONFIG_SCB8_MI0
+	{ REG_SCB8_ARBR0, REG_SCB8_ARBW0, 8, {
+		CONFIG_SCB8_MI0_SLOT0,
+		CONFIG_SCB8_MI0_SLOT1,
+		CONFIG_SCB8_MI0_SLOT2,
+		CONFIG_SCB8_MI0_SLOT3,
+		CONFIG_SCB8_MI0_SLOT4,
+		CONFIG_SCB8_MI0_SLOT5,
+		CONFIG_SCB8_MI0_SLOT6,
+		CONFIG_SCB8_MI0_SLOT7
+		},
+	},
+#endif
+#ifdef CONFIG_SCB9_MI0
+	{ REG_SCB9_ARBR0, REG_SCB9_ARBW0, 10, {
+		CONFIG_SCB9_MI0_SLOT0,
+		CONFIG_SCB9_MI0_SLOT1,
+		CONFIG_SCB9_MI0_SLOT2,
+		CONFIG_SCB9_MI0_SLOT3,
+		CONFIG_SCB9_MI0_SLOT4,
+		CONFIG_SCB9_MI0_SLOT5,
+		CONFIG_SCB9_MI0_SLOT6,
+		CONFIG_SCB9_MI0_SLOT7,
+		CONFIG_SCB9_MI0_SLOT8,
+		CONFIG_SCB9_MI0_SLOT9
+		},
+	},
+#endif
+	{ 0, }
+};
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-common/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mach-common/Makefile
new file mode 100644
index 0000000..fcef1c8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-common/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# arch/blackfin/mach-common/Makefile
+#
+
+obj-y := \
+	cache.o cache-c.o entry.o head.o \
+	interrupt.o arch_checks.o ints-priority.o
+
+obj-$(CONFIG_PM)          += pm.o
+ifneq ($(CONFIG_BF60x),y)
+obj-$(CONFIG_PM)	  += dpmc_modes.o
+endif
+obj-$(CONFIG_SCB_PRIORITY)	+= scb-init.o
+obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
+obj-$(CONFIG_SMP)         += smp.o
+obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-common/arch_checks.c b/src/kernel/linux/v4.14/arch/blackfin/mach-common/arch_checks.c
new file mode 100644
index 0000000..d8643fd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-common/arch_checks.c
@@ -0,0 +1,66 @@
+/*
+ * Do some checking to make sure things are OK
+ *
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <asm/fixed_code.h>
+#include <mach/anomaly.h>
+#include <asm/clocks.h>
+
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+
+# if (CONFIG_VCO_HZ > CONFIG_MAX_VCO_HZ)
+#  error "VCO selected is more than maximum value. Please change the VCO multipler"
+# endif
+
+# if (CONFIG_SCLK_HZ > CONFIG_MAX_SCLK_HZ)
+# error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
+# endif
+
+# if (CONFIG_SCLK_HZ < CONFIG_MIN_SCLK_HZ)
+# error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
+# endif
+
+# if (ANOMALY_05000273) && (CONFIG_SCLK_HZ * 2 > CONFIG_CCLK_HZ)
+# error "ANOMALY 05000273, please make sure CCLK is at least 2x SCLK"
+# endif
+
+# if (CONFIG_SCLK_HZ > CONFIG_CCLK_HZ) && (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) && (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ)
+# error "Please select sclk less than cclk"
+# endif
+
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+#if CONFIG_BOOT_LOAD < FIXED_CODE_END
+# error "The kernel load address must be after the fixed code section"
+#endif
+
+#if (CONFIG_BOOT_LOAD & 0x3)
+# error "The kernel load address must be 4 byte aligned"
+#endif
+
+/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */
+#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000
+# error "The kernel load address is too high; keep it below 10meg for safety"
+#endif
+
+#if ANOMALY_05000263 && defined(CONFIG_MPU)
+# error the MPU will not function safely while Anomaly 05000263 applies
+#endif
+
+#if ANOMALY_05000448
+# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
+#endif
+
+/* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */
+#if ANOMALY_05000220 && \
+	(defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK))
+# error "Anomaly 05000220 does not allow you to use Write Back cache with L2 or External Memory"
+#endif
+
+#if ANOMALY_05000491 && !defined(CONFIG_ICACHE_FLUSH_L1)
+# error You need IFLUSH in L1 inst while Anomaly 05000491 applies
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-common/cache-c.c b/src/kernel/linux/v4.14/arch/blackfin/mach-common/cache-c.c
new file mode 100644
index 0000000..f4adedc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-common/cache-c.c
@@ -0,0 +1,85 @@
+/*
+ * Blackfin cache control code (simpler control-style functions)
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <asm/blackfin.h>
+#include <asm/cplbinit.h>
+
+/* Invalidate the Entire Data cache by
+ * clearing DMC[1:0] bits
+ */
+void blackfin_invalidate_entire_dcache(void)
+{
+	u32 dmem = bfin_read_DMEM_CONTROL();
+	bfin_write_DMEM_CONTROL(dmem & ~0xc);
+	SSYNC();
+	bfin_write_DMEM_CONTROL(dmem);
+	SSYNC();
+}
+
+/* Invalidate the Entire Instruction cache by
+ * clearing IMC bit
+ */
+void blackfin_invalidate_entire_icache(void)
+{
+	u32 imem = bfin_read_IMEM_CONTROL();
+	bfin_write_IMEM_CONTROL(imem & ~0x4);
+	SSYNC();
+	bfin_write_IMEM_CONTROL(imem);
+	SSYNC();
+}
+
+#if defined(CONFIG_BFIN_ICACHE) || defined(CONFIG_BFIN_DCACHE)
+
+static void
+bfin_cache_init(struct cplb_entry *cplb_tbl, unsigned long cplb_addr,
+                unsigned long cplb_data, unsigned long mem_control,
+                unsigned long mem_mask)
+{
+	int i;
+#ifdef CONFIG_L1_PARITY_CHECK
+	u32 ctrl;
+
+	if (cplb_addr == DCPLB_ADDR0) {
+		ctrl = bfin_read32(mem_control) | (1 << RDCHK);
+		CSYNC();
+		bfin_write32(mem_control, ctrl);
+		SSYNC();
+	}
+#endif
+
+	for (i = 0; i < MAX_CPLBS; i++) {
+		bfin_write32(cplb_addr + i * 4, cplb_tbl[i].addr);
+		bfin_write32(cplb_data + i * 4, cplb_tbl[i].data);
+	}
+
+	_enable_cplb(mem_control, mem_mask);
+}
+
+#ifdef CONFIG_BFIN_ICACHE
+void bfin_icache_init(struct cplb_entry *icplb_tbl)
+{
+	bfin_cache_init(icplb_tbl, ICPLB_ADDR0, ICPLB_DATA0, IMEM_CONTROL,
+		(IMC | ENICPLB));
+}
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+void bfin_dcache_init(struct cplb_entry *dcplb_tbl)
+{
+	/*
+	 *  Anomaly notes:
+	 *  05000287 - We implement workaround #2 - Change the DMEM_CONTROL
+	 *  register, so that the port preferences for DAG0 and DAG1 are set
+	 *  to port B
+	 */
+	bfin_cache_init(dcplb_tbl, DCPLB_ADDR0, DCPLB_DATA0, DMEM_CONTROL,
+		(DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0)));
+}
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-common/cache.S b/src/kernel/linux/v4.14/arch/blackfin/mach-common/cache.S
new file mode 100644
index 0000000..9f4dd35
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-common/cache.S
@@ -0,0 +1,124 @@
+/*
+ * Blackfin cache control code
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#include <asm/cache.h>
+#include <asm/page.h>
+
+/* 05000443 - IFLUSH cannot be last instruction in hardware loop */
+#if ANOMALY_05000443
+# define BROK_FLUSH_INST "IFLUSH"
+#else
+# define BROK_FLUSH_INST "no anomaly! yeah!"
+#endif
+
+/* Since all L1 caches work the same way, we use the same method for flushing
+ * them.  Only the actual flush instruction differs.  We write this in asm as
+ * GCC can be hard to coax into writing nice hardware loops.
+ *
+ * Also, we assume the following register setup:
+ * R0 = start address
+ * R1 = end address
+ */
+.macro do_flush flushins:req label
+
+	R2 = -L1_CACHE_BYTES;
+
+	/* start = (start & -L1_CACHE_BYTES) */
+	R0 = R0 & R2;
+
+	/* end = ((end - 1) & -L1_CACHE_BYTES) + L1_CACHE_BYTES; */
+	R1 += -1;
+	R1 = R1 & R2;
+	R1 += L1_CACHE_BYTES;
+
+	/* count = (end - start) >> L1_CACHE_SHIFT */
+	R2 = R1 - R0;
+	R2 >>= L1_CACHE_SHIFT;
+	P1 = R2;
+
+.ifnb \label
+\label :
+.endif
+	P0 = R0;
+
+	LSETUP (1f, 2f) LC1 = P1;
+1:
+.ifeqs "\flushins", BROK_FLUSH_INST
+	\flushins [P0++];
+	nop;
+	nop;
+2:	nop;
+.else
+2:	\flushins [P0++];
+.endif
+
+	RTS;
+.endm
+
+#ifdef CONFIG_ICACHE_FLUSH_L1
+.section .l1.text
+#else
+.text
+#endif
+
+/* Invalidate all instruction cache lines assocoiated with this memory area */
+#ifdef CONFIG_SMP
+# define _blackfin_icache_flush_range _blackfin_icache_flush_range_l1
+#endif
+ENTRY(_blackfin_icache_flush_range)
+	do_flush IFLUSH
+ENDPROC(_blackfin_icache_flush_range)
+
+#ifdef CONFIG_SMP
+.text
+# undef _blackfin_icache_flush_range
+ENTRY(_blackfin_icache_flush_range)
+	p0.L = LO(DSPID);
+	p0.H = HI(DSPID);
+	r3 = [p0];
+	r3 = r3.b (z);
+	p2 = r3;
+	p0.L = _blackfin_iflush_l1_entry;
+	p0.H = _blackfin_iflush_l1_entry;
+	p0 = p0 + (p2 << 2);
+	p1 = [p0];
+	jump (p1);
+ENDPROC(_blackfin_icache_flush_range)
+#endif
+
+#ifdef CONFIG_DCACHE_FLUSH_L1
+.section .l1.text
+#else
+.text
+#endif
+
+/* Throw away all D-cached data in specified region without any obligation to
+ * write them back.  Since the Blackfin ISA does not have an "invalidate"
+ * instruction, we use flush/invalidate.  Perhaps as a speed optimization we
+ * could bang on the DTEST MMRs ...
+ */
+ENTRY(_blackfin_dcache_invalidate_range)
+	do_flush FLUSHINV
+ENDPROC(_blackfin_dcache_invalidate_range)
+
+/* Flush all data cache lines assocoiated with this memory area */
+ENTRY(_blackfin_dcache_flush_range)
+	do_flush FLUSH, .Ldfr
+ENDPROC(_blackfin_dcache_flush_range)
+
+/* Our headers convert the page structure to an address, so just need to flush
+ * its contents like normal.  We know the start address is page aligned (which
+ * greater than our cache alignment), as is the end address.  So just jump into
+ * the middle of the dcache flush function.
+ */
+ENTRY(_blackfin_dflush_page)
+	P1 = 1 << (PAGE_SHIFT - L1_CACHE_SHIFT);
+	jump .Ldfr;
+ENDPROC(_blackfin_dflush_page)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-common/clock.h b/src/kernel/linux/v4.14/arch/blackfin/mach-common/clock.h
new file mode 100644
index 0000000..fed851a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-common/clock.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_COMMON_CLKDEV_H
+#define __MACH_COMMON_CLKDEV_H
+
+#include <linux/clk.h>
+
+struct clk_ops {
+	unsigned long (*get_rate)(struct clk *clk);
+	unsigned long (*round_rate)(struct clk *clk, unsigned long rate);
+	int (*set_rate)(struct clk *clk, unsigned long rate);
+	int (*enable)(struct clk *clk);
+	int (*disable)(struct clk *clk);
+};
+
+struct clk {
+	const char		*name;
+	unsigned long           rate;
+	spinlock_t 		lock;
+	u32			flags;
+	const struct clk_ops    *ops;
+	const struct params 	*params;
+	void __iomem            *reg;
+	u32			mask;
+	u32			shift;
+};
+
+#endif
+
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-common/clocks-init.c b/src/kernel/linux/v4.14/arch/blackfin/mach-common/clocks-init.c
new file mode 100644
index 0000000..d436bd9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-common/clocks-init.c
@@ -0,0 +1,121 @@
+/*
+ * arch/blackfin/mach-common/clocks-init.c - reprogram clocks / memory
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+
+#include <asm/dma.h>
+#include <asm/clocks.h>
+#include <asm/mem_init.h>
+#include <asm/dpmc.h>
+
+#ifdef CONFIG_BF60x
+
+#define CGU_CTL_VAL ((CONFIG_VCO_MULT << 8) | CLKIN_HALF)
+#define CGU_DIV_VAL \
+	((CONFIG_CCLK_DIV   << CSEL_OFFSET)   | \
+	(CONFIG_SCLK_DIV << SYSSEL_OFFSET)   | \
+	(CONFIG_SCLK0_DIV  << S0SEL_OFFSET)  | \
+	(CONFIG_SCLK1_DIV  << S1SEL_OFFSET)  | \
+	(CONFIG_DCLK_DIV   << DSEL_OFFSET))
+
+#define CONFIG_BFIN_DCLK (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_DCLK_DIV) / 1000000)
+#if ((CONFIG_BFIN_DCLK != 125) && \
+	(CONFIG_BFIN_DCLK != 133) && (CONFIG_BFIN_DCLK != 150) && \
+	(CONFIG_BFIN_DCLK != 166) && (CONFIG_BFIN_DCLK != 200) && \
+	(CONFIG_BFIN_DCLK != 225) && (CONFIG_BFIN_DCLK != 250))
+#error "DCLK must be in (125, 133, 150, 166, 200, 225, 250)MHz"
+#endif
+
+#else
+#define SDGCTL_WIDTH (1 << 31)	/* SDRAM external data path width */
+#define PLL_CTL_VAL \
+	(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
+		(PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
+#endif
+
+__attribute__((l1_text))
+static void do_sync(void)
+{
+	__builtin_bfin_ssync();
+}
+
+__attribute__((l1_text))
+void init_clocks(void)
+{
+	/* Kill any active DMAs as they may trigger external memory accesses
+	 * in the middle of reprogramming things, and that'll screw us up.
+	 * For example, any automatic DMAs left by U-Boot for splash screens.
+	 */
+#ifdef CONFIG_BF60x
+	init_cgu(CGU_DIV_VAL, CGU_CTL_VAL);
+	init_dmc(CONFIG_BFIN_DCLK);
+#else
+	size_t i;
+	for (i = 0; i < MAX_DMA_CHANNELS; ++i) {
+		struct dma_register *dma = dma_io_base_addr[i];
+		dma->cfg = 0;
+	}
+
+	do_sync();
+
+#ifdef SIC_IWR0
+	bfin_write_SIC_IWR0(IWR_ENABLE(0));
+# ifdef SIC_IWR1
+	/* BF52x system reset does not properly reset SIC_IWR1 which
+	 * will screw up the bootrom as it relies on MDMA0/1 waking it
+	 * up from IDLE instructions.  See this report for more info:
+	 * http://blackfin.uclinux.org/gf/tracker/4323
+	 */
+	if (ANOMALY_05000435)
+		bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+	else
+		bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+# endif
+# ifdef SIC_IWR2
+	bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
+# endif
+#else
+	bfin_write_SIC_IWR(IWR_ENABLE(0));
+#endif
+	do_sync();
+#ifdef EBIU_SDGCTL
+	bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS);
+	do_sync();
+#endif
+
+#ifdef CLKBUFOE
+	bfin_write16(VR_CTL, bfin_read_VR_CTL() | CLKBUFOE);
+	do_sync();
+	__asm__ __volatile__("IDLE;");
+#endif
+	bfin_write_PLL_LOCKCNT(0x300);
+	do_sync();
+	/* We always write PLL_CTL thus avoiding Anomaly 05000242 */
+	bfin_write16(PLL_CTL, PLL_CTL_VAL);
+	__asm__ __volatile__("IDLE;");
+	bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+#ifdef EBIU_SDGCTL
+	bfin_write_EBIU_SDRRC(mem_SDRRC);
+	bfin_write_EBIU_SDGCTL((bfin_read_EBIU_SDGCTL() & SDGCTL_WIDTH) | mem_SDGCTL);
+#else
+	bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
+	do_sync();
+	bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1);
+	bfin_write_EBIU_DDRCTL0(mem_DDRCTL0);
+	bfin_write_EBIU_DDRCTL1(mem_DDRCTL1);
+	bfin_write_EBIU_DDRCTL2(mem_DDRCTL2);
+#ifdef CONFIG_MEM_EBIU_DDRQUE
+	bfin_write_EBIU_DDRQUE(CONFIG_MEM_EBIU_DDRQUE);
+#endif
+#endif
+#endif
+	do_sync();
+	bfin_read16(0);
+
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-common/dpmc.c b/src/kernel/linux/v4.14/arch/blackfin/mach-common/dpmc.c
new file mode 100644
index 0000000..724a8c5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-common/dpmc.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/cpufreq.h>
+
+#include <asm/delay.h>
+#include <asm/dpmc.h>
+
+#define DRIVER_NAME "bfin dpmc"
+
+struct bfin_dpmc_platform_data *pdata;
+
+/**
+ *	bfin_set_vlev - Update VLEV field in VR_CTL Reg.
+ *			Avoid BYPASS sequence
+ */
+static void bfin_set_vlev(unsigned int vlev)
+{
+	unsigned pll_lcnt;
+
+	pll_lcnt = bfin_read_PLL_LOCKCNT();
+
+	bfin_write_PLL_LOCKCNT(1);
+	bfin_write_VR_CTL((bfin_read_VR_CTL() & ~VLEV) | vlev);
+	bfin_write_PLL_LOCKCNT(pll_lcnt);
+}
+
+/**
+ *	bfin_get_vlev - Get CPU specific VLEV from platform device data
+ */
+static unsigned int bfin_get_vlev(unsigned int freq)
+{
+	int i;
+
+	if (!pdata)
+		goto err_out;
+
+	freq >>= 16;
+
+	for (i = 0; i < pdata->tabsize; i++)
+		if (freq <= (pdata->tuple_tab[i] & 0xFFFF))
+			return pdata->tuple_tab[i] >> 16;
+
+err_out:
+	printk(KERN_WARNING "DPMC: No suitable CCLK VDDINT voltage pair found\n");
+	return VLEV_120;
+}
+
+#ifdef CONFIG_CPU_FREQ
+# ifdef CONFIG_SMP
+static void bfin_idle_this_cpu(void *info)
+{
+	unsigned long flags = 0;
+	unsigned long iwr0, iwr1, iwr2;
+	unsigned int cpu = smp_processor_id();
+
+	local_irq_save_hw(flags);
+	bfin_iwr_set_sup0(&iwr0, &iwr1, &iwr2);
+
+	platform_clear_ipi(cpu, IRQ_SUPPLE_0);
+	SSYNC();
+	asm("IDLE;");
+	bfin_iwr_restore(iwr0, iwr1, iwr2);
+
+	local_irq_restore_hw(flags);
+}
+
+static void bfin_idle_cpu(void)
+{
+	smp_call_function(bfin_idle_this_cpu, NULL, 0);
+}
+
+static void bfin_wakeup_cpu(void)
+{
+	unsigned int cpu;
+	unsigned int this_cpu = smp_processor_id();
+	cpumask_t mask;
+
+	cpumask_copy(&mask, cpu_online_mask);
+	cpumask_clear_cpu(this_cpu, &mask);
+	for_each_cpu(cpu, &mask)
+		platform_send_ipi_cpu(cpu, IRQ_SUPPLE_0);
+}
+
+# else
+static void bfin_idle_cpu(void) {}
+static void bfin_wakeup_cpu(void) {}
+# endif
+
+static int
+vreg_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data)
+{
+	struct cpufreq_freqs *freq = data;
+
+	if (freq->cpu != CPUFREQ_CPU)
+		return 0;
+
+	if (val == CPUFREQ_PRECHANGE && freq->old < freq->new) {
+		bfin_idle_cpu();
+		bfin_set_vlev(bfin_get_vlev(freq->new));
+		udelay(pdata->vr_settling_time); /* Wait until Volatge settled */
+		bfin_wakeup_cpu();
+	} else if (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) {
+		bfin_idle_cpu();
+		bfin_set_vlev(bfin_get_vlev(freq->new));
+		bfin_wakeup_cpu();
+	}
+
+	return 0;
+}
+
+static struct notifier_block vreg_cpufreq_notifier_block = {
+	.notifier_call	= vreg_cpufreq_notifier
+};
+#endif /* CONFIG_CPU_FREQ */
+
+/**
+ *	bfin_dpmc_probe -
+ *
+ */
+static int bfin_dpmc_probe(struct platform_device *pdev)
+{
+	if (pdev->dev.platform_data)
+		pdata = pdev->dev.platform_data;
+	else
+		return -EINVAL;
+
+	return cpufreq_register_notifier(&vreg_cpufreq_notifier_block,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+/**
+ *	bfin_dpmc_remove -
+ */
+static int bfin_dpmc_remove(struct platform_device *pdev)
+{
+	pdata = NULL;
+	return cpufreq_unregister_notifier(&vreg_cpufreq_notifier_block,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+struct platform_driver bfin_dpmc_device_driver = {
+	.probe   = bfin_dpmc_probe,
+	.remove  = bfin_dpmc_remove,
+	.driver  = {
+		.name = DRIVER_NAME,
+	}
+};
+module_platform_driver(bfin_dpmc_device_driver);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("cpu power management driver for Blackfin");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-common/dpmc_modes.S b/src/kernel/linux/v4.14/arch/blackfin/mach-common/dpmc_modes.S
new file mode 100644
index 0000000..de99f3a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-common/dpmc_modes.S
@@ -0,0 +1,320 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#include <mach/irq.h>
+#include <asm/dpmc.h>
+
+.section .l1.text
+ENTRY(_sleep_mode)
+	[--SP] = (R7:4, P5:3);
+	[--SP] = RETS;
+
+	call _set_sic_iwr;
+
+	P0.H = hi(PLL_CTL);
+	P0.L = lo(PLL_CTL);
+	R1 = W[P0](z);
+	BITSET (R1, 3);
+	W[P0] = R1.L;
+
+	CLI R2;
+	SSYNC;
+	IDLE;
+	STI R2;
+
+	call _test_pll_locked;
+
+	R0 = IWR_ENABLE(0);
+	R1 = IWR_DISABLE_ALL;
+	R2 = IWR_DISABLE_ALL;
+
+	call _set_sic_iwr;
+
+	P0.H = hi(PLL_CTL);
+	P0.L = lo(PLL_CTL);
+	R7 = w[p0](z);
+	BITCLR (R7, 3);
+	BITCLR (R7, 5);
+	w[p0] = R7.L;
+	IDLE;
+
+	bfin_init_pm_bench_cycles;
+
+	call _test_pll_locked;
+
+	RETS = [SP++];
+	(R7:4, P5:3) = [SP++];
+	RTS;
+ENDPROC(_sleep_mode)
+
+/*
+ * This func never returns as it puts the part into hibernate, and
+ * is only called from do_hibernate, so we don't bother saving or
+ * restoring any of the normal C runtime state.  When we wake up,
+ * the entry point will be in do_hibernate and not here.
+ *
+ * We accept just one argument -- the value to write to VR_CTL.
+ */
+
+ENTRY(_hibernate_mode)
+	/* Save/setup the regs we need early for minor pipeline optimization */
+	R4 = R0;
+
+	P3.H = hi(VR_CTL);
+	P3.L = lo(VR_CTL);
+	/* Disable all wakeup sources */
+	R0 = IWR_DISABLE_ALL;
+	R1 = IWR_DISABLE_ALL;
+	R2 = IWR_DISABLE_ALL;
+	call _set_sic_iwr;
+	call _set_dram_srfs;
+	SSYNC;
+
+	/* Finally, we climb into our cave to hibernate */
+	W[P3] = R4.L;
+
+	bfin_init_pm_bench_cycles;
+
+	CLI R2;
+	IDLE;
+.Lforever:
+	jump .Lforever;
+ENDPROC(_hibernate_mode)
+
+ENTRY(_sleep_deeper)
+	[--SP] = (R7:4, P5:3);
+	[--SP] = RETS;
+
+	CLI R4;
+
+	P3 = R0;
+	P4 = R1;
+	P5 = R2;
+
+	R0 = IWR_ENABLE(0);
+	R1 = IWR_DISABLE_ALL;
+	R2 = IWR_DISABLE_ALL;
+
+	call _set_sic_iwr;
+	call _set_dram_srfs;	/* Set SDRAM Self Refresh */
+
+	P0.H = hi(PLL_DIV);
+	P0.L = lo(PLL_DIV);
+	R6 = W[P0](z);
+	R0.L = 0xF;
+	W[P0] = R0.l;		/* Set Max VCO to SCLK divider */
+
+	P0.H = hi(PLL_CTL);
+	P0.L = lo(PLL_CTL);
+	R5 = W[P0](z);
+	R0.L = (CONFIG_MIN_VCO_HZ/CONFIG_CLKIN_HZ) << 9;
+	W[P0] = R0.l;		/* Set Min CLKIN to VCO multiplier */
+
+	SSYNC;
+	IDLE;
+
+	call _test_pll_locked;
+
+	P0.H = hi(VR_CTL);
+	P0.L = lo(VR_CTL);
+	R7 = W[P0](z);
+	R1 = 0x6;
+	R1 <<= 16;
+	R2 = 0x0404(Z);
+	R1 = R1|R2;
+
+	R2 = DEPOSIT(R7, R1);
+	W[P0] = R2;		/* Set Min Core Voltage */
+
+	SSYNC;
+	IDLE;
+
+	call _test_pll_locked;
+
+	R0 = P3;
+	R1 = P4;
+	R3 = P5;
+	call _set_sic_iwr;	/* Set Awake from IDLE */
+
+	P0.H = hi(PLL_CTL);
+	P0.L = lo(PLL_CTL);
+	R0 = W[P0](z);
+	BITSET (R0, 3);
+	W[P0] = R0.L;		/* Turn CCLK OFF */
+	SSYNC;
+	IDLE;
+
+	call _test_pll_locked;
+
+	R0 = IWR_ENABLE(0);
+	R1 = IWR_DISABLE_ALL;
+	R2 = IWR_DISABLE_ALL;
+
+	call _set_sic_iwr;	/* Set Awake from IDLE PLL */
+
+	P0.H = hi(VR_CTL);
+	P0.L = lo(VR_CTL);
+	W[P0]= R7;
+
+	SSYNC;
+	IDLE;
+
+	bfin_init_pm_bench_cycles;
+
+	call _test_pll_locked;
+
+	P0.H = hi(PLL_DIV);
+	P0.L = lo(PLL_DIV);
+	W[P0]= R6;		/* Restore CCLK and SCLK divider */
+
+	P0.H = hi(PLL_CTL);
+	P0.L = lo(PLL_CTL);
+	w[p0] = R5;		/* Restore VCO multiplier */
+	IDLE;
+	call _test_pll_locked;
+
+	call _unset_dram_srfs;	/* SDRAM Self Refresh Off */
+
+	STI R4;
+
+	RETS = [SP++];
+	(R7:4, P5:3) = [SP++];
+	RTS;
+ENDPROC(_sleep_deeper)
+
+ENTRY(_set_dram_srfs)
+	/*  set the dram to self refresh mode */
+	SSYNC;
+#if defined(EBIU_RSTCTL)	/* DDR */
+	P0.H = hi(EBIU_RSTCTL);
+	P0.L = lo(EBIU_RSTCTL);
+	R2 = [P0];
+	BITSET(R2, 3); /* SRREQ enter self-refresh mode */
+	[P0] = R2;
+	SSYNC;
+1:
+	R2 = [P0];
+	CC = BITTST(R2, 4);
+	if !CC JUMP 1b;
+#else 				/* SDRAM */
+	P0.L = lo(EBIU_SDGCTL);
+	P0.H = hi(EBIU_SDGCTL);
+	P1.L = lo(EBIU_SDSTAT);
+	P1.H = hi(EBIU_SDSTAT);
+
+	R2 = [P0];
+	BITSET(R2, 24); /* SRFS enter self-refresh mode */
+	[P0] = R2;
+	SSYNC;
+
+1:
+	R2 = w[P1];
+	SSYNC;
+	cc = BITTST(R2, 1); /* SDSRA poll self-refresh status */
+	if !cc jump 1b;
+
+	R2 = [P0];
+	BITCLR(R2, 0); /* SCTLE disable CLKOUT */
+	[P0] = R2;
+#endif
+	RTS;
+ENDPROC(_set_dram_srfs)
+
+ENTRY(_unset_dram_srfs)
+	/*  set the dram out of self refresh mode */
+
+#if defined(EBIU_RSTCTL)	/* DDR */
+	P0.H = hi(EBIU_RSTCTL);
+	P0.L = lo(EBIU_RSTCTL);
+	R2 = [P0];
+	BITCLR(R2, 3); /* clear SRREQ bit */
+	[P0] = R2;
+#elif defined(EBIU_SDGCTL)	/* SDRAM */
+	/* release CLKOUT from self-refresh */
+	P0.L = lo(EBIU_SDGCTL);
+	P0.H = hi(EBIU_SDGCTL);
+
+	R2 = [P0];
+	BITSET(R2, 0); /* SCTLE enable CLKOUT */
+	[P0] = R2
+	SSYNC;
+
+	/* release SDRAM from self-refresh */
+	R2 = [P0];
+	BITCLR(R2, 24); /* clear SRFS bit */
+	[P0] = R2
+#endif
+
+	SSYNC;
+	RTS;
+ENDPROC(_unset_dram_srfs)
+
+ENTRY(_set_sic_iwr)
+#ifdef SIC_IWR0
+	P0.H = hi(SYSMMR_BASE);
+	P0.L = lo(SYSMMR_BASE);
+	[P0 + (SIC_IWR0 - SYSMMR_BASE)] = R0;
+	[P0 + (SIC_IWR1 - SYSMMR_BASE)] = R1;
+# ifdef SIC_IWR2
+	[P0 + (SIC_IWR2 - SYSMMR_BASE)] = R2;
+# endif
+#else
+	P0.H = hi(SIC_IWR);
+	P0.L = lo(SIC_IWR);
+	[P0] = R0;
+#endif
+
+	SSYNC;
+	RTS;
+ENDPROC(_set_sic_iwr)
+
+ENTRY(_test_pll_locked)
+	P0.H = hi(PLL_STAT);
+	P0.L = lo(PLL_STAT);
+1:
+	R0 = W[P0] (Z);
+	CC = BITTST(R0,5);
+	IF !CC JUMP 1b;
+	RTS;
+ENDPROC(_test_pll_locked)
+
+.section .text
+ENTRY(_do_hibernate)
+	bfin_cpu_reg_save;
+	bfin_sys_mmr_save;
+	bfin_core_mmr_save;
+
+	/* Setup args to hibernate mode early for pipeline optimization */
+	R0 = M3;
+	P1.H = _hibernate_mode;
+	P1.L = _hibernate_mode;
+
+	/* Save Magic, return address and Stack Pointer */
+	P0 = 0;
+	R1.H = 0xDEAD;	/* Hibernate Magic */
+	R1.L = 0xBEEF;
+	R2.H = .Lpm_resume_here;
+	R2.L = .Lpm_resume_here;
+	[P0++] = R1;	/* Store Hibernate Magic */
+	[P0++] = R2;	/* Save Return Address */
+	[P0++] = SP;	/* Save Stack Pointer */
+
+	/* Must use an indirect call as we need to jump to L1 */
+	call (P1); /* Goodbye */
+
+.Lpm_resume_here:
+
+	bfin_core_mmr_restore;
+	bfin_sys_mmr_restore;
+	bfin_cpu_reg_restore;
+
+	[--sp] = RETI;	/* Clear Global Interrupt Disable */
+	SP += 4;
+
+	RTS;
+ENDPROC(_do_hibernate)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-common/entry.S b/src/kernel/linux/v4.14/arch/blackfin/mach-common/entry.S
new file mode 100644
index 0000000..8d9431e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-common/entry.S
@@ -0,0 +1,1711 @@
+/*
+ * Contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all
+ * interrupts and faults that can result in a task-switch.
+ *
+ * Copyright 2005-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/* NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/unistd.h>
+#include <asm/blackfin.h>
+#include <asm/errno.h>
+#include <asm/fixed_code.h>
+#include <asm/thread_info.h>  /* TIF_NEED_RESCHED */
+#include <asm/asm-offsets.h>
+#include <asm/trace.h>
+#include <asm/traps.h>
+
+#include <asm/context.S>
+
+
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+.section .l1.text
+#else
+.text
+#endif
+
+/* Slightly simplified and streamlined entry point for CPLB misses.
+ * This one does not lower the level to IRQ5, and thus can be used to
+ * patch up CPLB misses on the kernel stack.
+ */
+#if ANOMALY_05000261
+#define _ex_dviol _ex_workaround_261
+#define _ex_dmiss _ex_workaround_261
+#define _ex_dmult _ex_workaround_261
+
+ENTRY(_ex_workaround_261)
+	/*
+	 * Work around an anomaly: if we see a new DCPLB fault, return
+	 * without doing anything.  Then, if we get the same fault again,
+	 * handle it.
+	 */
+	P4 = R7;	/* Store EXCAUSE */
+
+	GET_PDA(p5, r7);
+	r7 = [p5 + PDA_LFRETX];
+	r6 = retx;
+	[p5 + PDA_LFRETX] = r6;
+	cc = r6 == r7;
+	if !cc jump _bfin_return_from_exception;
+	/* fall through */
+	R7 = P4;
+	R6 = VEC_CPLB_M;	/* Data CPLB Miss */
+	cc = R6 == R7;
+	if cc jump _ex_dcplb_miss (BP);
+#ifdef CONFIG_MPU
+	R6 = VEC_CPLB_VL;	/* Data CPLB Violation */
+	cc = R6 == R7;
+	if cc jump _ex_dcplb_viol (BP);
+#endif
+	/* Handle Data CPLB Protection Violation
+	 * and Data CPLB Multiple Hits - Linux Trap Zero
+	 */
+	jump _ex_trap_c;
+ENDPROC(_ex_workaround_261)
+
+#else
+#ifdef CONFIG_MPU
+#define _ex_dviol _ex_dcplb_viol
+#else
+#define _ex_dviol _ex_trap_c
+#endif
+#define _ex_dmiss _ex_dcplb_miss
+#define _ex_dmult _ex_trap_c
+#endif
+
+
+ENTRY(_ex_dcplb_viol)
+ENTRY(_ex_dcplb_miss)
+ENTRY(_ex_icplb_miss)
+	(R7:6,P5:4) = [sp++];
+	/* We leave the previously pushed ASTAT on the stack.  */
+	SAVE_CONTEXT_CPLB
+
+	/* We must load R1 here, _before_ DEBUG_HWTRACE_SAVE, since that
+	 * will change the stack pointer.  */
+	R0 = SEQSTAT;
+	R1 = SP;
+
+	DEBUG_HWTRACE_SAVE(p5, r7)
+
+	sp += -12;
+	call _cplb_hdr;
+	sp += 12;
+	CC = R0 == 0;
+	IF !CC JUMP _handle_bad_cplb;
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/* While we were processing this, did we double fault? */
+	r7 = SEQSTAT;           /* reason code is in bit 5:0 */
+	r6.l = lo(SEQSTAT_EXCAUSE);
+	r6.h = hi(SEQSTAT_EXCAUSE);
+	r7 = r7 & r6;
+	r6 = 0x25;
+	CC = R7 == R6;
+	if CC JUMP _double_fault;
+#endif
+
+	DEBUG_HWTRACE_RESTORE(p5, r7)
+	RESTORE_CONTEXT_CPLB
+	ASTAT = [SP++];
+	SP = EX_SCRATCH_REG;
+	rtx;
+ENDPROC(_ex_icplb_miss)
+
+ENTRY(_ex_syscall)
+	raise 15;		/* invoked by TRAP #0, for sys call */
+	jump.s _bfin_return_from_exception;
+ENDPROC(_ex_syscall)
+
+ENTRY(_ex_single_step)
+	/* If we just returned from an interrupt, the single step event is
+	   for the RTI instruction.  */
+	r7 = retx;
+	r6 = reti;
+	cc = r7 == r6;
+	if cc jump _bfin_return_from_exception;
+
+#ifdef CONFIG_KGDB
+	/* Don't do single step in hardware exception handler */
+        p5.l = lo(IPEND);
+        p5.h = hi(IPEND);
+	r6 = [p5];
+	cc = bittst(r6, 4);
+	if cc jump _bfin_return_from_exception;
+	cc = bittst(r6, 5);
+	if cc jump _bfin_return_from_exception;
+
+	/* skip single step if current interrupt priority is higher than
+	 * that of the first instruction, from which gdb starts single step */
+	r6 >>= 6;
+	r7 = 10;
+.Lfind_priority_start:
+	cc = bittst(r6, 0);
+	if cc jump .Lfind_priority_done;
+	r6 >>= 1;
+	r7 += -1;
+	cc = r7 == 0;
+	if cc jump .Lfind_priority_done;
+	jump.s .Lfind_priority_start;
+.Lfind_priority_done:
+	p4.l = _kgdb_single_step;
+	p4.h = _kgdb_single_step;
+	r6 = [p4];
+	cc = r6 == 0;
+	if cc jump .Ldo_single_step;
+	r6 += -1;
+	cc = r6 < r7;
+	if cc jump 1f;
+.Ldo_single_step:
+#else
+	/* If we were in user mode, do the single step normally.  */
+	p5.l = lo(IPEND);
+	p5.h = hi(IPEND);
+	r6 = [p5];
+	r7 = 0xffe0 (z);
+	r7 = r7 & r6;
+	cc = r7 == 0;
+	if !cc jump 1f;
+#endif
+#ifdef CONFIG_EXACT_HWERR
+	/* Read the ILAT, and to check to see if the process we are
+	 * single stepping caused a previous hardware error
+	 * If so, do not single step, (which lowers to IRQ5, and makes
+	 * us miss the error).
+	 */
+	p5.l = lo(ILAT);
+	p5.h = hi(ILAT);
+	r7 = [p5];
+	cc = bittst(r7, EVT_IVHW_P);
+	if cc jump 1f;
+#endif
+	/* Single stepping only a single instruction, so clear the trace
+	 * bit here.  */
+	r7 = syscfg;
+	bitclr (r7, SYSCFG_SSSTEP_P);
+	syscfg = R7;
+	jump _ex_trap_c;
+
+1:
+	/*
+	 * We were in an interrupt handler.  By convention, all of them save
+	 * SYSCFG with their first instruction, so by checking whether our
+	 * RETX points at the entry point, we can determine whether to allow
+	 * a single step, or whether to clear SYSCFG.
+	 *
+	 * First, find out the interrupt level and the event vector for it.
+	 */
+	p5.l = lo(EVT0);
+	p5.h = hi(EVT0);
+	p5 += -4;
+2:
+	r7 = rot r7 by -1;
+	p5 += 4;
+	if !cc jump 2b;
+
+	/* What we actually do is test for the _second_ instruction in the
+	 * IRQ handler.  That way, if there are insns following the restore
+	 * of SYSCFG after leaving the handler, we will not turn off SYSCFG
+	 * for them.  */
+
+	r7 = [p5];
+	r7 += 2;
+	r6 = RETX;
+	cc = R7 == R6;
+	if !cc jump _bfin_return_from_exception;
+
+	r7 = syscfg;
+	bitclr (r7, SYSCFG_SSSTEP_P);	/* Turn off single step */
+	syscfg = R7;
+
+	/* Fall through to _bfin_return_from_exception.  */
+ENDPROC(_ex_single_step)
+
+ENTRY(_bfin_return_from_exception)
+#if ANOMALY_05000257
+	R7=LC0;
+	LC0=R7;
+	R7=LC1;
+	LC1=R7;
+#endif
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/* While we were processing the current exception,
+	 * did we cause another, and double fault?
+	 */
+	r7 = SEQSTAT;           /* reason code is in bit 5:0 */
+	r6.l = lo(SEQSTAT_EXCAUSE);
+	r6.h = hi(SEQSTAT_EXCAUSE);
+	r7 = r7 & r6;
+	r6 = VEC_UNCOV;
+	CC = R7 == R6;
+	if CC JUMP _double_fault;
+#endif
+
+	(R7:6,P5:4) = [sp++];
+	ASTAT = [sp++];
+	sp = EX_SCRATCH_REG;
+	rtx;
+ENDPROC(_bfin_return_from_exception)
+
+ENTRY(_handle_bad_cplb)
+	DEBUG_HWTRACE_RESTORE(p5, r7)
+	/* To get here, we just tried and failed to change a CPLB
+	 * so, handle things in trap_c (C code), by lowering to
+	 * IRQ5, just like we normally do. Since this is not a
+	 * "normal" return path, we have a do a lot of stuff to
+	 * the stack to get ready so, we can fall through - we
+	 * need to make a CPLB exception look like a normal exception
+	 */
+	RESTORE_CONTEXT_CPLB
+	/* ASTAT is still on the stack, where it is needed.  */
+	[--sp] = (R7:6,P5:4);
+
+ENTRY(_ex_replaceable)
+	nop;
+
+ENTRY(_ex_trap_c)
+	/* The only thing that has been saved in this context is
+	 * (R7:6,P5:4), ASTAT & SP - don't use anything else
+	 */
+
+	GET_PDA(p5, r6);
+
+	/* Make sure we are not in a double fault */
+	p4.l = lo(IPEND);
+	p4.h = hi(IPEND);
+	r7 = [p4];
+	CC = BITTST (r7, 5);
+	if CC jump _double_fault;
+	[p5 + PDA_EXIPEND] = r7;
+
+	/* Call C code (trap_c) to handle the exception, which most
+	 * likely involves sending a signal to the current process.
+	 * To avoid double faults, lower our priority to IRQ5 first.
+	 */
+	r7.h = _exception_to_level5;
+	r7.l = _exception_to_level5;
+	p4.l = lo(EVT5);
+	p4.h = hi(EVT5);
+	[p4] = r7;
+	csync;
+
+	/*
+	 * Save these registers, as they are only valid in exception context
+	 *  (where we are now - as soon as we defer to IRQ5, they can change)
+	 * DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3,
+	 * but they are not very interesting, so don't save them
+	 */
+
+	p4.l = lo(DCPLB_FAULT_ADDR);
+	p4.h = hi(DCPLB_FAULT_ADDR);
+	r7 = [p4];
+	[p5 + PDA_DCPLB] = r7;
+
+	p4.l = lo(ICPLB_FAULT_ADDR);
+	p4.h = hi(ICPLB_FAULT_ADDR);
+	r6 = [p4];
+	[p5 + PDA_ICPLB] = r6;
+
+	r6 = retx;
+	[p5 + PDA_RETX] = r6;
+
+	r6 = SEQSTAT;
+	[p5 + PDA_SEQSTAT] = r6;
+
+	/* Save the state of single stepping */
+	r6 = SYSCFG;
+	[p5 + PDA_SYSCFG] = r6;
+	/* Clear it while we handle the exception in IRQ5 mode */
+	BITCLR(r6, SYSCFG_SSSTEP_P);
+	SYSCFG = r6;
+
+	/* Save the current IMASK, since we change in order to jump to level 5 */
+	cli r6;
+	[p5 + PDA_EXIMASK] = r6;
+
+	p4.l = lo(SAFE_USER_INSTRUCTION);
+	p4.h = hi(SAFE_USER_INSTRUCTION);
+	retx = p4;
+
+	/* Disable all interrupts, but make sure level 5 is enabled so
+	 * we can switch to that level.
+	 */
+	r6 = 0x3f;
+	sti r6;
+
+	/* In case interrupts are disabled IPEND[4] (global interrupt disable bit)
+	 * clear it (re-enabling interrupts again) by the special sequence of pushing
+	 * RETI onto the stack.  This way we can lower ourselves to IVG5 even if the
+	 * exception was taken after the interrupt handler was called but before it
+	 * got a chance to enable global interrupts itself.
+	 */
+	[--sp] = reti;
+	sp += 4;
+
+	raise 5;
+	jump.s _bfin_return_from_exception;
+ENDPROC(_ex_trap_c)
+
+/* We just realized we got an exception, while we were processing a different
+ * exception. This is a unrecoverable event, so crash.
+ * Note: this cannot be ENTRY() as we jump here with "if cc jump" ...
+ */
+ENTRY(_double_fault)
+	/* Turn caches & protection off, to ensure we don't get any more
+	 * double exceptions
+	 */
+
+	P4.L = LO(IMEM_CONTROL);
+	P4.H = HI(IMEM_CONTROL);
+
+	R5 = [P4];              /* Control Register*/
+	BITCLR(R5,ENICPLB_P);
+	CSYNC;          /* Disabling of CPLBs should be proceeded by a CSYNC */
+	[P4] = R5;
+	SSYNC;
+
+	P4.L = LO(DMEM_CONTROL);
+	P4.H = HI(DMEM_CONTROL);
+	R5 = [P4];
+	BITCLR(R5,ENDCPLB_P);
+	CSYNC;          /* Disabling of CPLBs should be proceeded by a CSYNC */
+	[P4] = R5;
+	SSYNC;
+
+	/* Fix up the stack */
+	(R7:6,P5:4) = [sp++];
+	ASTAT = [sp++];
+	SP = EX_SCRATCH_REG;
+
+	/* We should be out of the exception stack, and back down into
+	 * kernel or user space stack
+	 */
+	SAVE_ALL_SYS
+
+	/* The dumping functions expect the return address in the RETI
+	 * slot.  */
+	r6 = retx;
+	[sp + PT_PC] = r6;
+
+	r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
+	SP += -12;
+	pseudo_long_call _double_fault_c, p5;
+	SP += 12;
+.L_double_fault_panic:
+        JUMP .L_double_fault_panic
+
+ENDPROC(_double_fault)
+
+ENTRY(_exception_to_level5)
+	SAVE_ALL_SYS
+
+	GET_PDA(p5, r7);        /* Fetch current PDA */
+	r6 = [p5 + PDA_RETX];
+	[sp + PT_PC] = r6;
+
+	r6 = [p5 + PDA_SYSCFG];
+	[sp + PT_SYSCFG] = r6;
+
+	r6 = [p5 + PDA_SEQSTAT]; /* Read back seqstat */
+	[sp + PT_SEQSTAT] = r6;
+
+	/* Restore the hardware error vector.  */
+	r7.h = _evt_ivhw;
+	r7.l = _evt_ivhw;
+	p4.l = lo(EVT5);
+	p4.h = hi(EVT5);
+	[p4] = r7;
+	csync;
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/* Now that we have the hardware error vector programmed properly
+	 * we can re-enable interrupts (IPEND[4]), so if the _trap_c causes
+	 * another hardware error, we can catch it (self-nesting).
+	 */
+	[--sp] = reti;
+	sp += 4;
+#endif
+
+	r7 = [p5 + PDA_EXIPEND]	/* Read the IPEND from the Exception state */
+	[sp + PT_IPEND] = r7;   /* Store IPEND onto the stack */
+
+	r0 = sp; 	/* stack frame pt_regs pointer argument ==> r0 */
+	SP += -12;
+	pseudo_long_call _trap_c, p4;
+	SP += 12;
+
+	/* If interrupts were off during the exception (IPEND[4] = 1), turn them off
+	 * before we return.
+	 */
+	CC = BITTST(r7, EVT_IRPTEN_P)
+	if !CC jump 1f;
+	/* this will load a random value into the reti register - but that is OK,
+	 * since we do restore it to the correct value in the 'RESTORE_ALL_SYS' macro
+	 */
+	sp += -4;
+	reti = [sp++];
+1:
+	/* restore the interrupt mask (IMASK) */
+	r6 = [p5 + PDA_EXIMASK];
+	sti r6;
+
+	call _ret_from_exception;
+	RESTORE_ALL_SYS
+	rti;
+ENDPROC(_exception_to_level5)
+
+ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
+	/* Since the kernel stack can be anywhere, it's not guaranteed to be
+	 * covered by a CPLB.  Switch to an exception stack; use RETN as a
+	 * scratch register (for want of a better option).
+	 */
+	EX_SCRATCH_REG = sp;
+	GET_PDA_SAFE(sp);
+	sp = [sp + PDA_EXSTACK];
+	/* Try to deal with syscalls quickly.  */
+	[--sp] = ASTAT;
+	[--sp] = (R7:6,P5:4);
+
+	ANOMALY_283_315_WORKAROUND(p5, r7)
+
+#ifdef CONFIG_EXACT_HWERR
+	/* Make sure all pending read/writes complete. This will ensure any
+	 * accesses which could cause hardware errors completes, and signal
+	 * the the hardware before we do something silly, like crash the
+	 * kernel. We don't need to work around anomaly 05000312, since
+	 * we are already atomic
+	 */
+	ssync;
+#endif
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/*
+	 * Save these registers, as they are only valid in exception context
+	 * (where we are now - as soon as we defer to IRQ5, they can change)
+	 * DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3,
+	 * but they are not very interesting, so don't save them
+	 */
+
+	GET_PDA(p5, r7);
+	p4.l = lo(DCPLB_FAULT_ADDR);
+	p4.h = hi(DCPLB_FAULT_ADDR);
+	r7 = [p4];
+	[p5 + PDA_DF_DCPLB] = r7;
+
+	p4.l = lo(ICPLB_FAULT_ADDR);
+	p4.h = hi(ICPLB_FAULT_ADDR);
+	r7 = [p4];
+	[p5 + PDA_DF_ICPLB] = r7;
+
+	r7 = retx;
+	[p5 + PDA_DF_RETX] = r7;
+
+	r7 = SEQSTAT;		/* reason code is in bit 5:0 */
+	[p5 + PDA_DF_SEQSTAT] = r7;
+#else
+	r7 = SEQSTAT;           /* reason code is in bit 5:0 */
+#endif
+	r6.l = lo(SEQSTAT_EXCAUSE);
+	r6.h = hi(SEQSTAT_EXCAUSE);
+	r7 = r7 & r6;
+	p5.h = _ex_table;
+	p5.l = _ex_table;
+	p4 = r7;
+	p5 = p5 + (p4 << 2);
+	p4 = [p5];
+	jump (p4);
+
+.Lbadsys:
+	r7 = -ENOSYS; 		/* signextending enough */
+	[sp + PT_R0] = r7;	/* return value from system call */
+	jump .Lsyscall_really_exit;
+ENDPROC(_trap)
+
+ENTRY(_system_call)
+	/* Store IPEND */
+	p2.l = lo(IPEND);
+	p2.h = hi(IPEND);
+	csync;
+	r0 = [p2];
+	[sp + PT_IPEND] = r0;
+
+	/* Store RETS for now */
+	r0 = rets;
+	[sp + PT_RESERVED] = r0;
+	/* Set the stack for the current process */
+	r7 = sp;
+	r6.l = lo(ALIGN_PAGE_MASK);
+	r6.h = hi(ALIGN_PAGE_MASK);
+	r7 = r7 & r6;  		/* thread_info */
+	p2 = r7;
+	p2 = [p2];
+
+	[p2+(TASK_THREAD+THREAD_KSP)] = sp;
+#ifdef CONFIG_IPIPE
+	r0 = sp;
+	SP += -12;
+	pseudo_long_call ___ipipe_syscall_root, p0;
+	SP += 12;
+	cc = r0 == 1;
+	if cc jump .Lsyscall_really_exit;
+	cc = r0 == -1;
+	if cc jump .Lresume_userspace;
+	r3 = [sp + PT_R3];
+	r4 = [sp + PT_R4];
+	p0 = [sp + PT_ORIG_P0];
+#endif /* CONFIG_IPIPE */
+
+	/* are we tracing syscalls?*/
+	r7 = sp;
+	r6.l = lo(ALIGN_PAGE_MASK);
+	r6.h = hi(ALIGN_PAGE_MASK);
+	r7 = r7 & r6;
+	p2 = r7;
+	r7 = [p2+TI_FLAGS];
+	CC = BITTST(r7,TIF_SYSCALL_TRACE);
+	if CC JUMP _sys_trace;
+	CC = BITTST(r7,TIF_SINGLESTEP);
+	if CC JUMP _sys_trace;
+
+	/* Make sure the system call # is valid */
+	p4 = __NR_syscall;
+	/* System call number is passed in P0 */
+	cc = p4 <= p0;
+	if cc jump .Lbadsys;
+
+	/* Execute the appropriate system call */
+
+	p4 = p0;
+	p5.l = _sys_call_table;
+	p5.h = _sys_call_table;
+	p5 = p5 + (p4 << 2);
+	r0 = [sp + PT_R0];
+	r1 = [sp + PT_R1];
+	r2 = [sp + PT_R2];
+	p5 = [p5];
+
+	[--sp] = r5;
+	[--sp] = r4;
+	[--sp] = r3;
+	SP += -12;
+	call (p5);
+	SP += 24;
+	[sp + PT_R0] = r0;
+
+.Lresume_userspace:
+	r7 = sp;
+	r4.l = lo(ALIGN_PAGE_MASK);
+	r4.h = hi(ALIGN_PAGE_MASK);
+	r7 = r7 & r4;		/* thread_info->flags */
+	p5 = r7;
+.Lresume_userspace_1:
+	/* Disable interrupts.  */
+	[--sp] = reti;
+	reti = [sp++];
+
+	r7 = [p5 + TI_FLAGS];
+	r4.l = lo(_TIF_WORK_MASK);
+	r4.h = hi(_TIF_WORK_MASK);
+	r7 =  r7 & r4;
+
+.Lsyscall_resched:
+#ifdef CONFIG_IPIPE
+	cc = BITTST(r7, TIF_IRQ_SYNC);
+	if !cc jump .Lsyscall_no_irqsync;
+	/*
+	 * Clear IPEND[4] manually to undo what resume_userspace_1 just did;
+	 * we need this so that high priority domain interrupts may still
+	 * preempt the current domain while the pipeline log is being played
+	 * back.
+	 */
+	[--sp] = reti;
+	SP += 4; /* don't merge with next insn to keep the pattern obvious */
+	SP += -12;
+	pseudo_long_call ___ipipe_sync_root, p4;
+	SP += 12;
+	jump .Lresume_userspace_1;
+.Lsyscall_no_irqsync:
+#endif
+	cc = BITTST(r7, TIF_NEED_RESCHED);
+	if !cc jump .Lsyscall_sigpending;
+
+	/* Reenable interrupts.  */
+	[--sp] = reti;
+	sp += 4;
+
+	SP += -12;
+	pseudo_long_call _schedule, p4;
+	SP += 12;
+
+	jump .Lresume_userspace_1;
+
+.Lsyscall_sigpending:
+	cc = BITTST(r7, TIF_SIGPENDING);
+	if cc jump .Lsyscall_do_signals;
+	cc = BITTST(r7, TIF_NOTIFY_RESUME);
+	if !cc jump .Lsyscall_really_exit;
+.Lsyscall_do_signals:
+	/* Reenable interrupts.  */
+	[--sp] = reti;
+	sp += 4;
+
+	r0 = sp;
+	SP += -12;
+	pseudo_long_call _do_notify_resume, p5;
+	SP += 12;
+
+.Lsyscall_really_exit:
+	r5 = [sp + PT_RESERVED];
+	rets = r5;
+	rts;
+ENDPROC(_system_call)
+
+/* Do not mark as ENTRY() to avoid error in assembler ...
+ * this symbol need not be global anyways, so ...
+ */
+_sys_trace:
+	r0 = sp;
+	pseudo_long_call _syscall_trace_enter, p5;
+
+	/* Make sure the system call # is valid */
+	p4 = [SP + PT_P0];
+	p3 = __NR_syscall;
+	cc = p3 <= p4;
+	r0 = -ENOSYS;
+	if cc jump .Lsys_trace_badsys;
+
+	/* Execute the appropriate system call */
+	p5.l = _sys_call_table;
+	p5.h = _sys_call_table;
+	p5 = p5 + (p4 << 2);
+	r0 = [sp + PT_R0];
+	r1 = [sp + PT_R1];
+	r2 = [sp + PT_R2];
+	r3 = [sp + PT_R3];
+	r4 = [sp + PT_R4];
+	r5 = [sp + PT_R5];
+	p5 = [p5];
+
+	[--sp] = r5;
+	[--sp] = r4;
+	[--sp] = r3;
+	SP += -12;
+	call (p5);
+	SP += 24;
+.Lsys_trace_badsys:
+	[sp + PT_R0] = r0;
+
+	r0 = sp;
+	pseudo_long_call _syscall_trace_leave, p5;
+	jump .Lresume_userspace;
+ENDPROC(_sys_trace)
+
+ENTRY(_resume)
+	/*
+	 * Beware - when entering resume, prev (the current task) is
+	 * in r0, next (the new task) is in r1.
+	 */
+	p0 = r0;
+	p1 = r1;
+	[--sp] = rets;
+	[--sp] = fp;
+	[--sp] = (r7:4, p5:3);
+
+	/* save usp */
+	p2 = usp;
+	[p0+(TASK_THREAD+THREAD_USP)] = p2;
+
+	/* save current kernel stack pointer */
+	[p0+(TASK_THREAD+THREAD_KSP)] = sp;
+
+	/* save program counter */
+	r1.l = _new_old_task;
+	r1.h = _new_old_task;
+	[p0+(TASK_THREAD+THREAD_PC)] = r1;
+
+	/* restore the kernel stack pointer */
+	sp = [p1+(TASK_THREAD+THREAD_KSP)];
+
+	/* restore user stack pointer */
+	p0 = [p1+(TASK_THREAD+THREAD_USP)];
+	usp = p0;
+
+	/* restore pc */
+	p0 = [p1+(TASK_THREAD+THREAD_PC)];
+	jump (p0);
+
+	/*
+	 * Following code actually lands up in a new (old) task.
+	 */
+
+_new_old_task:
+	(r7:4, p5:3) = [sp++];
+	fp = [sp++];
+	rets = [sp++];
+
+	/*
+	 * When we come out of resume, r0 carries "old" task, because we are
+	 * in "new" task.
+	 */
+	rts;
+ENDPROC(_resume)
+
+ENTRY(_ret_from_exception)
+#ifdef CONFIG_IPIPE
+	p2.l = _ipipe_percpu_domain;
+	p2.h = _ipipe_percpu_domain;
+	r0.l = _ipipe_root;
+	r0.h = _ipipe_root;
+	r2 = [p2];
+	cc = r0 == r2;
+	if !cc jump 4f;  /* not on behalf of the root domain, get out */
+#endif /* CONFIG_IPIPE */
+	p2.l = lo(IPEND);
+	p2.h = hi(IPEND);
+
+	csync;
+	r0 = [p2];
+	[sp + PT_IPEND] = r0;
+
+1:
+	r2 = LO(~0x37) (Z);
+	r0 = r2 & r0;
+	cc = r0 == 0;
+	if !cc jump 4f;	/* if not return to user mode, get out */
+
+	/* Make sure any pending system call or deferred exception
+	 * return in ILAT for this process to get executed, otherwise
+	 * in case context switch happens, system call of
+	 * first process (i.e in ILAT) will be carried
+	 * forward to the switched process
+	 */
+
+	p2.l = lo(ILAT);
+	p2.h = hi(ILAT);
+	r0 = [p2];
+	r1 = (EVT_IVG14 | EVT_IVG15) (z);
+	r0 = r0 & r1;
+	cc = r0 == 0;
+	if !cc jump 5f;
+
+	/* Set the stack for the current process */
+	r7 = sp;
+	r4.l = lo(ALIGN_PAGE_MASK);
+	r4.h = hi(ALIGN_PAGE_MASK);
+	r7 = r7 & r4;		/* thread_info->flags */
+	p5 = r7;
+	r7 = [p5 + TI_FLAGS];
+	r4.l = lo(_TIF_WORK_MASK);
+	r4.h = hi(_TIF_WORK_MASK);
+	r7 =  r7 & r4;
+	cc = r7 == 0;
+	if cc jump 4f;
+
+	p0.l = lo(EVT15);
+	p0.h = hi(EVT15);
+	p1.l = _schedule_and_signal;
+	p1.h = _schedule_and_signal;
+	[p0] = p1;
+	csync;
+	raise 15;		/* raise evt15 to do signal or reschedule */
+4:
+	r0 = syscfg;
+	bitclr(r0, SYSCFG_SSSTEP_P);		/* Turn off single step */
+	syscfg = r0;
+5:
+	rts;
+ENDPROC(_ret_from_exception)
+
+#if defined(CONFIG_PREEMPT)
+
+ENTRY(_up_to_irq14)
+#if ANOMALY_05000281 || ANOMALY_05000461
+	r0.l = lo(SAFE_USER_INSTRUCTION);
+	r0.h = hi(SAFE_USER_INSTRUCTION);
+	reti = r0;
+#endif
+
+#ifdef CONFIG_DEBUG_HWERR
+	/* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */
+	r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#else
+	/* Only enable irq14 interrupt, until we transition to _evt_evt14 */
+	r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#endif
+	sti r0;
+
+	p0.l = lo(EVT14);
+	p0.h = hi(EVT14);
+	p1.l = _evt_up_evt14;
+	p1.h = _evt_up_evt14;
+	[p0] = p1;
+	csync;
+
+	raise 14;
+1:
+	jump 1b;
+ENDPROC(_up_to_irq14)
+
+ENTRY(_evt_up_evt14)
+#ifdef CONFIG_DEBUG_HWERR
+	r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+	sti r0;
+#else
+	cli r0;
+#endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+	[--sp] = rets;
+	sp += -12;
+	call _trace_hardirqs_off;
+	sp += 12;
+	rets = [sp++];
+#endif
+	[--sp] = RETI;
+	SP += 4;
+
+	/* restore normal evt14 */
+	p0.l = lo(EVT14);
+	p0.h = hi(EVT14);
+	p1.l = _evt_evt14;
+	p1.h = _evt_evt14;
+	[p0] = p1;
+	csync;
+
+	rts;
+ENDPROC(_evt_up_evt14)
+
+#endif
+
+#ifdef CONFIG_IPIPE
+
+_resume_kernel_from_int:
+	r1 = LO(~0x8000) (Z);
+	r1 = r0 & r1;
+	r0 = 1;
+	r0 = r1 - r0;
+	r2 = r1 & r0;
+	cc = r2 == 0;
+	/* Sync the root stage only from the outer interrupt level. */
+	if !cc jump .Lnosync;
+	r0.l = ___ipipe_sync_root;
+	r0.h = ___ipipe_sync_root;
+	[--sp] = reti;
+	[--sp] = rets;
+	[--sp] = ( r7:4, p5:3 );
+	SP += -12;
+	call ___ipipe_call_irqtail
+	SP += 12;
+	( r7:4, p5:3 ) = [sp++];
+	rets = [sp++];
+	reti = [sp++];
+.Lnosync:
+	rts
+#elif defined(CONFIG_PREEMPT)
+
+_resume_kernel_from_int:
+	/* check preempt_count */
+	r7 = sp;
+	r4.l = lo(ALIGN_PAGE_MASK);
+	r4.h = hi(ALIGN_PAGE_MASK);
+	r7 = r7 & r4;
+	p5 = r7;
+	r7 = [p5 + TI_PREEMPT];
+	cc = r7 == 0x0;
+	if !cc jump .Lreturn_to_kernel;
+.Lneed_schedule:
+	r7 = [p5 + TI_FLAGS];
+	r4.l = lo(_TIF_WORK_MASK);
+	r4.h = hi(_TIF_WORK_MASK);
+	r7 =  r7 & r4;
+	cc = BITTST(r7, TIF_NEED_RESCHED);
+	if !cc jump .Lreturn_to_kernel;
+	/*
+	 * let schedule done at level 15, otherwise sheduled process will run
+	 * at high level and block low level interrupt
+	 */
+	r6 = reti;  /* save reti */
+	r5.l = .Lkernel_schedule;
+	r5.h = .Lkernel_schedule;
+	reti = r5;
+	rti;
+.Lkernel_schedule:
+	[--sp] = rets;
+	sp += -12;
+	pseudo_long_call _preempt_schedule_irq, p4;
+	sp += 12;
+	rets = [sp++];
+
+	[--sp] = rets;
+	sp += -12;
+	/* up to irq14 so that reti after restore_all can return to irq15(kernel) */
+	pseudo_long_call _up_to_irq14, p4;
+	sp += 12;
+	rets = [sp++];
+
+	reti = r6; /* restore reti so that origin process can return to interrupted point */
+
+	jump .Lneed_schedule;
+#else
+
+#define _resume_kernel_from_int	.Lreturn_to_kernel
+#endif
+
+ENTRY(_return_from_int)
+	/* If someone else already raised IRQ 15, do nothing.  */
+	csync;
+	p2.l = lo(ILAT);
+	p2.h = hi(ILAT);
+	r0 = [p2];
+	cc = bittst (r0, EVT_IVG15_P);
+	if cc jump .Lreturn_to_kernel;
+
+	/* if not return to user mode, get out */
+	p2.l = lo(IPEND);
+	p2.h = hi(IPEND);
+	r0 = [p2];
+	r1 = 0x17(Z);
+	r2 = ~r1;
+	r2.h = 0;
+	r0 = r2 & r0;
+	r1 = 1;
+	r1 = r0 - r1;
+	r2 = r0 & r1;
+	cc = r2 == 0;
+	if !cc jump _resume_kernel_from_int;
+
+	/* Lower the interrupt level to 15.  */
+	p0.l = lo(EVT15);
+	p0.h = hi(EVT15);
+	p1.l = _schedule_and_signal_from_int;
+	p1.h = _schedule_and_signal_from_int;
+	[p0] = p1;
+	csync;
+#if ANOMALY_05000281 || ANOMALY_05000461
+	r0.l = lo(SAFE_USER_INSTRUCTION);
+	r0.h = hi(SAFE_USER_INSTRUCTION);
+	reti = r0;
+#endif
+	r0 = 0x801f (z);
+	STI r0;
+	raise 15;	/* raise evt15 to do signal or reschedule */
+	rti;
+.Lreturn_to_kernel:
+	rts;
+ENDPROC(_return_from_int)
+
+ENTRY(_lower_to_irq14)
+#if ANOMALY_05000281 || ANOMALY_05000461
+	r0.l = lo(SAFE_USER_INSTRUCTION);
+	r0.h = hi(SAFE_USER_INSTRUCTION);
+	reti = r0;
+#endif
+
+#ifdef CONFIG_DEBUG_HWERR
+	/* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */
+	r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#else
+	/* Only enable irq14 interrupt, until we transition to _evt_evt14 */
+	r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#endif
+	sti r0;
+	raise 14;
+	rti;
+ENDPROC(_lower_to_irq14)
+
+ENTRY(_evt_evt14)
+#ifdef CONFIG_DEBUG_HWERR
+	r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+	sti r0;
+#else
+	cli r0;
+#endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+	[--sp] = rets;
+	sp += -12;
+	call _trace_hardirqs_off;
+	sp += 12;
+	rets = [sp++];
+#endif
+	[--sp] = RETI;
+	SP += 4;
+	rts;
+ENDPROC(_evt_evt14)
+
+ENTRY(_schedule_and_signal_from_int)
+	/* To end up here, vector 15 was changed - so we have to change it
+	 * back.
+	 */
+	p0.l = lo(EVT15);
+	p0.h = hi(EVT15);
+	p1.l = _evt_system_call;
+	p1.h = _evt_system_call;
+	[p0] = p1;
+	csync;
+
+	/* Set orig_p0 to -1 to indicate this isn't the end of a syscall.  */
+	r0 = -1 (x);
+	[sp + PT_ORIG_P0] = r0;
+
+	p1 = rets;
+	[sp + PT_RESERVED] = p1;
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* trace_hardirqs_on() checks if all irqs are disabled. But here IRQ 15
+	 * is turned on, so disable all irqs. */
+	cli r0;
+	sp += -12;
+	call _trace_hardirqs_on;
+	sp += 12;
+#endif
+#ifdef CONFIG_SMP
+	GET_PDA(p0, r0); 	/* Fetch current PDA (can't migrate to other CPU here) */
+	r0 = [p0 + PDA_IRQFLAGS];
+#else
+	p0.l = _bfin_irq_flags;
+	p0.h = _bfin_irq_flags;
+	r0 = [p0];
+#endif
+	sti r0;
+
+	/* finish the userspace "atomic" functions for it */
+	r1.l = lo(FIXED_CODE_END);
+	r1.h = hi(FIXED_CODE_END);
+	r2 = [sp + PT_PC];
+	cc = r1 <= r2;
+	if cc jump .Lresume_userspace (bp);
+
+	r0 = sp;
+	sp += -12;
+
+	pseudo_long_call _finish_atomic_sections, p5;
+	sp += 12;
+	jump.s .Lresume_userspace;
+ENDPROC(_schedule_and_signal_from_int)
+
+ENTRY(_schedule_and_signal)
+	SAVE_CONTEXT_SYSCALL
+	/* To end up here, vector 15 was changed - so we have to change it
+	 * back.
+	 */
+	p0.l = lo(EVT15);
+	p0.h = hi(EVT15);
+	p1.l = _evt_system_call;
+	p1.h = _evt_system_call;
+	[p0] = p1;
+	csync;
+	p0.l = 1f;
+	p0.h = 1f;
+	[sp + PT_RESERVED] = P0;
+	call .Lresume_userspace;
+1:
+	RESTORE_CONTEXT
+	rti;
+ENDPROC(_schedule_and_signal)
+
+/* We handle this 100% in exception space - to reduce overhead
+ * Only potiential problem is if the software buffer gets swapped out of the
+ * CPLB table - then double fault. - so we don't let this happen in other places
+ */
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ENTRY(_ex_trace_buff_full)
+	[--sp] = P3;
+	[--sp] = P2;
+	[--sp] = LC0;
+	[--sp] = LT0;
+	[--sp] = LB0;
+	P5.L = _trace_buff_offset;
+	P5.H = _trace_buff_offset;
+	P3 = [P5];              /* trace_buff_offset */
+	P5.L = lo(TBUFSTAT);
+	P5.H = hi(TBUFSTAT);
+	R7 = [P5];
+	R7 <<= 1;               /* double, since we need to read twice */
+	LC0 = R7;
+	R7 <<= 2;               /* need to shift over again,
+				 * to get the number of bytes */
+	P5.L = lo(TBUF);
+	P5.H = hi(TBUF);
+	R6 = ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*1024) - 1;
+
+	P2 = R7;
+	P3 = P3 + P2;
+	R7 = P3;
+	R7 = R7 & R6;
+	P3 = R7;
+	P2.L = _trace_buff_offset;
+	P2.H = _trace_buff_offset;
+	[P2] = P3;
+
+	P2.L = _software_trace_buff;
+	P2.H = _software_trace_buff;
+
+	LSETUP (.Lstart, .Lend) LC0;
+.Lstart:
+	R7 = [P5];      /* read TBUF */
+	P4 = P3 + P2;
+	[P4] = R7;
+	P3 += -4;
+	R7 = P3;
+	R7 = R7 & R6;
+.Lend:
+	P3 = R7;
+
+	LB0 = [sp++];
+	LT0 = [sp++];
+	LC0 = [sp++];
+	P2 = [sp++];
+	P3 = [sp++];
+	jump _bfin_return_from_exception;
+ENDPROC(_ex_trace_buff_full)
+
+#if CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN == 4
+.data
+#else
+.section .l1.data.B
+#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN */
+ENTRY(_trace_buff_offset)
+        .long 0;
+ALIGN
+ENTRY(_software_trace_buff)
+	.rept ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*256);
+	.long 0
+	.endr
+#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */
+
+#ifdef CONFIG_EARLY_PRINTK
+__INIT
+ENTRY(_early_trap)
+	SAVE_ALL_SYS
+	trace_buffer_stop(p0,r0);
+
+	ANOMALY_283_315_WORKAROUND(p4, r5)
+
+	/* Turn caches off, to ensure we don't get double exceptions */
+
+	P4.L = LO(IMEM_CONTROL);
+	P4.H = HI(IMEM_CONTROL);
+
+	R5 = [P4];              /* Control Register*/
+	BITCLR(R5,ENICPLB_P);
+	CSYNC;          /* Disabling of CPLBs should be proceeded by a CSYNC */
+	[P4] = R5;
+	SSYNC;
+
+	P4.L = LO(DMEM_CONTROL);
+	P4.H = HI(DMEM_CONTROL);
+	R5 = [P4];
+	BITCLR(R5,ENDCPLB_P);
+	CSYNC;          /* Disabling of CPLBs should be proceeded by a CSYNC */
+	[P4] = R5;
+	SSYNC;
+
+	r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
+	r1 = RETX;
+
+	SP += -12;
+	call _early_trap_c;
+	SP += 12;
+ENDPROC(_early_trap)
+__FINIT
+#endif /* CONFIG_EARLY_PRINTK */
+
+/*
+ * Put these in the kernel data section - that should always be covered by
+ * a CPLB. This is needed to ensure we don't get double fault conditions
+ */
+
+#ifdef CONFIG_SYSCALL_TAB_L1
+.section .l1.data
+#else
+.data
+#endif
+
+ENTRY(_ex_table)
+	/* entry for each EXCAUSE[5:0]
+	 * This table must be in sync with the table in ./kernel/traps.c
+	 * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
+	 */
+	.long _ex_syscall       /* 0x00 - User Defined - Linux Syscall */
+	.long _ex_trap_c        /* 0x01 - User Defined - Software breakpoint */
+#ifdef	CONFIG_KGDB
+	.long _ex_trap_c	/* 0x02 - User Defined - KGDB initial connection
+							 and break signal trap */
+#else
+	.long _ex_replaceable   /* 0x02 - User Defined */
+#endif
+	.long _ex_trap_c        /* 0x03 - User Defined - userspace stack overflow */
+	.long _ex_trap_c        /* 0x04 - User Defined - dump trace buffer */
+	.long _ex_replaceable   /* 0x05 - User Defined */
+	.long _ex_replaceable   /* 0x06 - User Defined */
+	.long _ex_replaceable   /* 0x07 - User Defined */
+	.long _ex_replaceable   /* 0x08 - User Defined */
+	.long _ex_replaceable   /* 0x09 - User Defined */
+	.long _ex_replaceable   /* 0x0A - User Defined */
+	.long _ex_replaceable   /* 0x0B - User Defined */
+	.long _ex_replaceable   /* 0x0C - User Defined */
+	.long _ex_replaceable   /* 0x0D - User Defined */
+	.long _ex_replaceable   /* 0x0E - User Defined */
+	.long _ex_replaceable   /* 0x0F - User Defined */
+	.long _ex_single_step   /* 0x10 - HW Single step */
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	.long _ex_trace_buff_full /* 0x11 - Trace Buffer Full */
+#else
+	.long _ex_trap_c        /* 0x11 - Trace Buffer Full */
+#endif
+	.long _ex_trap_c        /* 0x12 - Reserved */
+	.long _ex_trap_c        /* 0x13 - Reserved */
+	.long _ex_trap_c        /* 0x14 - Reserved */
+	.long _ex_trap_c        /* 0x15 - Reserved */
+	.long _ex_trap_c        /* 0x16 - Reserved */
+	.long _ex_trap_c        /* 0x17 - Reserved */
+	.long _ex_trap_c        /* 0x18 - Reserved */
+	.long _ex_trap_c        /* 0x19 - Reserved */
+	.long _ex_trap_c        /* 0x1A - Reserved */
+	.long _ex_trap_c        /* 0x1B - Reserved */
+	.long _ex_trap_c        /* 0x1C - Reserved */
+	.long _ex_trap_c        /* 0x1D - Reserved */
+	.long _ex_trap_c        /* 0x1E - Reserved */
+	.long _ex_trap_c        /* 0x1F - Reserved */
+	.long _ex_trap_c        /* 0x20 - Reserved */
+	.long _ex_trap_c        /* 0x21 - Undefined Instruction */
+	.long _ex_trap_c        /* 0x22 - Illegal Instruction Combination */
+	.long _ex_dviol         /* 0x23 - Data CPLB Protection Violation */
+	.long _ex_trap_c        /* 0x24 - Data access misaligned */
+	.long _ex_trap_c        /* 0x25 - Unrecoverable Event */
+	.long _ex_dmiss         /* 0x26 - Data CPLB Miss */
+	.long _ex_dmult         /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero */
+	.long _ex_trap_c        /* 0x28 - Emulation Watchpoint */
+	.long _ex_trap_c        /* 0x29 - Instruction fetch access error (535 only) */
+	.long _ex_trap_c        /* 0x2A - Instruction fetch misaligned */
+	.long _ex_trap_c        /* 0x2B - Instruction CPLB protection Violation */
+	.long _ex_icplb_miss    /* 0x2C - Instruction CPLB miss */
+	.long _ex_trap_c        /* 0x2D - Instruction CPLB Multiple Hits */
+	.long _ex_trap_c        /* 0x2E - Illegal use of Supervisor Resource */
+	.long _ex_trap_c        /* 0x2E - Illegal use of Supervisor Resource */
+	.long _ex_trap_c        /* 0x2F - Reserved */
+	.long _ex_trap_c        /* 0x30 - Reserved */
+	.long _ex_trap_c        /* 0x31 - Reserved */
+	.long _ex_trap_c        /* 0x32 - Reserved */
+	.long _ex_trap_c        /* 0x33 - Reserved */
+	.long _ex_trap_c        /* 0x34 - Reserved */
+	.long _ex_trap_c        /* 0x35 - Reserved */
+	.long _ex_trap_c        /* 0x36 - Reserved */
+	.long _ex_trap_c        /* 0x37 - Reserved */
+	.long _ex_trap_c        /* 0x38 - Reserved */
+	.long _ex_trap_c        /* 0x39 - Reserved */
+	.long _ex_trap_c        /* 0x3A - Reserved */
+	.long _ex_trap_c        /* 0x3B - Reserved */
+	.long _ex_trap_c        /* 0x3C - Reserved */
+	.long _ex_trap_c        /* 0x3D - Reserved */
+	.long _ex_trap_c        /* 0x3E - Reserved */
+	.long _ex_trap_c        /* 0x3F - Reserved */
+END(_ex_table)
+
+ENTRY(_sys_call_table)
+	.long _sys_restart_syscall	/* 0 */
+	.long _sys_exit
+	.long _sys_ni_syscall	/* fork */
+	.long _sys_read
+	.long _sys_write
+	.long _sys_open		/* 5 */
+	.long _sys_close
+	.long _sys_ni_syscall	/* old waitpid */
+	.long _sys_creat
+	.long _sys_link
+	.long _sys_unlink	/* 10 */
+	.long _sys_execve
+	.long _sys_chdir
+	.long _sys_time
+	.long _sys_mknod
+	.long _sys_chmod		/* 15 */
+	.long _sys_chown	/* chown16 */
+	.long _sys_ni_syscall	/* old break syscall holder */
+	.long _sys_ni_syscall	/* old stat */
+	.long _sys_lseek
+	.long _sys_getpid	/* 20 */
+	.long _sys_mount
+	.long _sys_ni_syscall	/* old umount */
+	.long _sys_setuid
+	.long _sys_getuid
+	.long _sys_stime		/* 25 */
+	.long _sys_ptrace
+	.long _sys_alarm
+	.long _sys_ni_syscall	/* old fstat */
+	.long _sys_pause
+	.long _sys_ni_syscall	/* old utime */ /* 30 */
+	.long _sys_ni_syscall	/* old stty syscall holder */
+	.long _sys_ni_syscall	/* old gtty syscall holder */
+	.long _sys_access
+	.long _sys_nice
+	.long _sys_ni_syscall	/* 35 */ /* old ftime syscall holder */
+	.long _sys_sync
+	.long _sys_kill
+	.long _sys_rename
+	.long _sys_mkdir
+	.long _sys_rmdir		/* 40 */
+	.long _sys_dup
+	.long _sys_pipe
+	.long _sys_times
+	.long _sys_ni_syscall	/* old prof syscall holder */
+	.long _sys_brk		/* 45 */
+	.long _sys_setgid
+	.long _sys_getgid
+	.long _sys_ni_syscall	/* old sys_signal */
+	.long _sys_geteuid	/* geteuid16 */
+	.long _sys_getegid	/* getegid16 */	/* 50 */
+	.long _sys_acct
+	.long _sys_umount	/* recycled never used phys() */
+	.long _sys_ni_syscall	/* old lock syscall holder */
+	.long _sys_ioctl
+	.long _sys_fcntl		/* 55 */
+	.long _sys_ni_syscall	/* old mpx syscall holder */
+	.long _sys_setpgid
+	.long _sys_ni_syscall	/* old ulimit syscall holder */
+	.long _sys_ni_syscall	/* old old uname */
+	.long _sys_umask		/* 60 */
+	.long _sys_chroot
+	.long _sys_ustat
+	.long _sys_dup2
+	.long _sys_getppid
+	.long _sys_getpgrp	/* 65 */
+	.long _sys_setsid
+	.long _sys_ni_syscall	/* old sys_sigaction */
+	.long _sys_sgetmask
+	.long _sys_ssetmask
+	.long _sys_setreuid	/* setreuid16 */	/* 70 */
+	.long _sys_setregid	/* setregid16 */
+	.long _sys_ni_syscall	/* old sys_sigsuspend */
+	.long _sys_ni_syscall	/* old sys_sigpending */
+	.long _sys_sethostname
+	.long _sys_setrlimit	/* 75 */
+	.long _sys_ni_syscall	/* old getrlimit */
+	.long _sys_getrusage
+	.long _sys_gettimeofday
+	.long _sys_settimeofday
+	.long _sys_getgroups	/* getgroups16 */	/* 80 */
+	.long _sys_setgroups	/* setgroups16 */
+	.long _sys_ni_syscall	/* old_select */
+	.long _sys_symlink
+	.long _sys_ni_syscall	/* old lstat */
+	.long _sys_readlink	/* 85 */
+	.long _sys_uselib
+	.long _sys_ni_syscall	/* sys_swapon */
+	.long _sys_reboot
+	.long _sys_ni_syscall	/* old_readdir */
+	.long _sys_ni_syscall	/* sys_mmap */	/* 90 */
+	.long _sys_munmap
+	.long _sys_truncate
+	.long _sys_ftruncate
+	.long _sys_fchmod
+	.long _sys_fchown	/* fchown16 */	/* 95 */
+	.long _sys_getpriority
+	.long _sys_setpriority
+	.long _sys_ni_syscall	/* old profil syscall holder */
+	.long _sys_statfs
+	.long _sys_fstatfs	/* 100 */
+	.long _sys_ni_syscall
+	.long _sys_ni_syscall	/* old sys_socketcall */
+	.long _sys_syslog
+	.long _sys_setitimer
+	.long _sys_getitimer	/* 105 */
+	.long _sys_newstat
+	.long _sys_newlstat
+	.long _sys_newfstat
+	.long _sys_ni_syscall	/* old uname */
+	.long _sys_ni_syscall	/* iopl for i386 */ /* 110 */
+	.long _sys_vhangup
+	.long _sys_ni_syscall	/* obsolete idle() syscall */
+	.long _sys_ni_syscall	/* vm86old for i386 */
+	.long _sys_wait4
+	.long _sys_ni_syscall	/* 115 */ /* sys_swapoff */
+	.long _sys_sysinfo
+	.long _sys_ni_syscall	/* old sys_ipc */
+	.long _sys_fsync
+	.long _sys_ni_syscall	/* old sys_sigreturn */
+	.long _bfin_clone		/* 120 */
+	.long _sys_setdomainname
+	.long _sys_newuname
+	.long _sys_ni_syscall	/* old sys_modify_ldt */
+	.long _sys_adjtimex
+	.long _sys_mprotect	/* 125 */
+	.long _sys_ni_syscall	/* old sys_sigprocmask */
+	.long _sys_ni_syscall	/* old "creat_module" */
+	.long _sys_init_module
+	.long _sys_delete_module
+	.long _sys_ni_syscall	/* 130: old "get_kernel_syms" */
+	.long _sys_quotactl
+	.long _sys_getpgid
+	.long _sys_fchdir
+	.long _sys_bdflush
+	.long _sys_ni_syscall	/* 135 */ /* sys_sysfs */
+	.long _sys_personality
+	.long _sys_ni_syscall	/* for afs_syscall */
+	.long _sys_setfsuid	/* setfsuid16 */
+	.long _sys_setfsgid	/* setfsgid16 */
+	.long _sys_llseek	/* 140 */
+	.long _sys_getdents
+	.long _sys_ni_syscall	/* sys_select */
+	.long _sys_flock
+	.long _sys_msync
+	.long _sys_readv		/* 145 */
+	.long _sys_writev
+	.long _sys_getsid
+	.long _sys_fdatasync
+	.long _sys_sysctl
+	.long _sys_mlock	/* 150 */
+	.long _sys_munlock
+	.long _sys_mlockall
+	.long _sys_munlockall
+	.long _sys_sched_setparam
+	.long _sys_sched_getparam /* 155 */
+	.long _sys_sched_setscheduler
+	.long _sys_sched_getscheduler
+	.long _sys_sched_yield
+	.long _sys_sched_get_priority_max
+	.long _sys_sched_get_priority_min  /* 160 */
+	.long _sys_sched_rr_get_interval
+	.long _sys_nanosleep
+	.long _sys_mremap
+	.long _sys_setresuid	/* setresuid16 */
+	.long _sys_getresuid	/* getresuid16 */	/* 165 */
+	.long _sys_ni_syscall	/* for vm86 */
+	.long _sys_ni_syscall	/* old "query_module" */
+	.long _sys_ni_syscall	/* sys_poll */
+	.long _sys_ni_syscall   /* old nfsservctl */
+	.long _sys_setresgid	/* setresgid16 */	/* 170 */
+	.long _sys_getresgid	/* getresgid16 */
+	.long _sys_prctl
+	.long _sys_rt_sigreturn
+	.long _sys_rt_sigaction
+	.long _sys_rt_sigprocmask /* 175 */
+	.long _sys_rt_sigpending
+	.long _sys_rt_sigtimedwait
+	.long _sys_rt_sigqueueinfo
+	.long _sys_rt_sigsuspend
+	.long _sys_pread64	/* 180 */
+	.long _sys_pwrite64
+	.long _sys_lchown	/* lchown16 */
+	.long _sys_getcwd
+	.long _sys_capget
+	.long _sys_capset	/* 185 */
+	.long _sys_sigaltstack
+	.long _sys_sendfile
+	.long _sys_ni_syscall	/* streams1 */
+	.long _sys_ni_syscall	/* streams2 */
+	.long _sys_vfork		/* 190 */
+	.long _sys_getrlimit
+	.long _sys_mmap_pgoff
+	.long _sys_truncate64
+	.long _sys_ftruncate64
+	.long _sys_stat64	/* 195 */
+	.long _sys_lstat64
+	.long _sys_fstat64
+	.long _sys_chown
+	.long _sys_getuid
+	.long _sys_getgid	/* 200 */
+	.long _sys_geteuid
+	.long _sys_getegid
+	.long _sys_setreuid
+	.long _sys_setregid
+	.long _sys_getgroups	/* 205 */
+	.long _sys_setgroups
+	.long _sys_fchown
+	.long _sys_setresuid
+	.long _sys_getresuid
+	.long _sys_setresgid	/* 210 */
+	.long _sys_getresgid
+	.long _sys_lchown
+	.long _sys_setuid
+	.long _sys_setgid
+	.long _sys_setfsuid	/* 215 */
+	.long _sys_setfsgid
+	.long _sys_pivot_root
+	.long _sys_mincore
+	.long _sys_madvise
+	.long _sys_getdents64	/* 220 */
+	.long _sys_fcntl64
+	.long _sys_ni_syscall	/* reserved for TUX */
+	.long _sys_ni_syscall
+	.long _sys_gettid
+	.long _sys_readahead	/* 225 */
+	.long _sys_setxattr
+	.long _sys_lsetxattr
+	.long _sys_fsetxattr
+	.long _sys_getxattr
+	.long _sys_lgetxattr	/* 230 */
+	.long _sys_fgetxattr
+	.long _sys_listxattr
+	.long _sys_llistxattr
+	.long _sys_flistxattr
+	.long _sys_removexattr	/* 235 */
+	.long _sys_lremovexattr
+	.long _sys_fremovexattr
+	.long _sys_tkill
+	.long _sys_sendfile64
+	.long _sys_futex		/* 240 */
+	.long _sys_sched_setaffinity
+	.long _sys_sched_getaffinity
+	.long _sys_ni_syscall	/* sys_set_thread_area */
+	.long _sys_ni_syscall	/* sys_get_thread_area */
+	.long _sys_io_setup	/* 245 */
+	.long _sys_io_destroy
+	.long _sys_io_getevents
+	.long _sys_io_submit
+	.long _sys_io_cancel
+	.long _sys_ni_syscall	/* 250 */ /* sys_alloc_hugepages */
+	.long _sys_ni_syscall	/* sys_freec_hugepages */
+	.long _sys_exit_group
+	.long _sys_lookup_dcookie
+	.long _sys_bfin_spinlock
+	.long _sys_epoll_create	/* 255 */
+	.long _sys_epoll_ctl
+	.long _sys_epoll_wait
+	.long _sys_ni_syscall /* remap_file_pages */
+	.long _sys_set_tid_address
+	.long _sys_timer_create	/* 260 */
+	.long _sys_timer_settime
+	.long _sys_timer_gettime
+	.long _sys_timer_getoverrun
+	.long _sys_timer_delete
+	.long _sys_clock_settime /* 265 */
+	.long _sys_clock_gettime
+	.long _sys_clock_getres
+	.long _sys_clock_nanosleep
+	.long _sys_statfs64
+	.long _sys_fstatfs64	/* 270 */
+	.long _sys_tgkill
+	.long _sys_utimes
+	.long _sys_fadvise64_64
+	.long _sys_ni_syscall /* vserver */
+	.long _sys_mbind	/* 275 */
+	.long _sys_ni_syscall /* get_mempolicy */
+	.long _sys_ni_syscall /* set_mempolicy */
+	.long _sys_mq_open
+	.long _sys_mq_unlink
+	.long _sys_mq_timedsend	/* 280 */
+	.long _sys_mq_timedreceive
+	.long _sys_mq_notify
+	.long _sys_mq_getsetattr
+	.long _sys_ni_syscall /* kexec_load */
+	.long _sys_waitid	/* 285 */
+	.long _sys_add_key
+	.long _sys_request_key
+	.long _sys_keyctl
+	.long _sys_ioprio_set
+	.long _sys_ioprio_get	/* 290 */
+	.long _sys_inotify_init
+	.long _sys_inotify_add_watch
+	.long _sys_inotify_rm_watch
+	.long _sys_ni_syscall /* migrate_pages */
+	.long _sys_openat	/* 295 */
+	.long _sys_mkdirat
+	.long _sys_mknodat
+	.long _sys_fchownat
+	.long _sys_futimesat
+	.long _sys_fstatat64	/* 300 */
+	.long _sys_unlinkat
+	.long _sys_renameat
+	.long _sys_linkat
+	.long _sys_symlinkat
+	.long _sys_readlinkat	/* 305 */
+	.long _sys_fchmodat
+	.long _sys_faccessat
+	.long _sys_pselect6
+	.long _sys_ppoll
+	.long _sys_unshare	/* 310 */
+	.long _sys_sram_alloc
+	.long _sys_sram_free
+	.long _sys_dma_memcpy
+	.long _sys_accept
+	.long _sys_bind		/* 315 */
+	.long _sys_connect
+	.long _sys_getpeername
+	.long _sys_getsockname
+	.long _sys_getsockopt
+	.long _sys_listen	/* 320 */
+	.long _sys_recv
+	.long _sys_recvfrom
+	.long _sys_recvmsg
+	.long _sys_send
+	.long _sys_sendmsg	/* 325 */
+	.long _sys_sendto
+	.long _sys_setsockopt
+	.long _sys_shutdown
+	.long _sys_socket
+	.long _sys_socketpair	/* 330 */
+	.long _sys_semctl
+	.long _sys_semget
+	.long _sys_semop
+	.long _sys_msgctl
+	.long _sys_msgget	/* 335 */
+	.long _sys_msgrcv
+	.long _sys_msgsnd
+	.long _sys_shmat
+	.long _sys_shmctl
+	.long _sys_shmdt	/* 340 */
+	.long _sys_shmget
+	.long _sys_splice
+	.long _sys_sync_file_range
+	.long _sys_tee
+	.long _sys_vmsplice	/* 345 */
+	.long _sys_epoll_pwait
+	.long _sys_utimensat
+	.long _sys_signalfd
+	.long _sys_timerfd_create
+	.long _sys_eventfd	/* 350 */
+	.long _sys_pread64
+	.long _sys_pwrite64
+	.long _sys_fadvise64
+	.long _sys_set_robust_list
+	.long _sys_get_robust_list	/* 355 */
+	.long _sys_fallocate
+	.long _sys_semtimedop
+	.long _sys_timerfd_settime
+	.long _sys_timerfd_gettime
+	.long _sys_signalfd4		/* 360 */
+	.long _sys_eventfd2
+	.long _sys_epoll_create1
+	.long _sys_dup3
+	.long _sys_pipe2
+	.long _sys_inotify_init1	/* 365 */
+	.long _sys_preadv
+	.long _sys_pwritev
+	.long _sys_rt_tgsigqueueinfo
+	.long _sys_perf_event_open
+	.long _sys_recvmmsg		/* 370 */
+	.long _sys_fanotify_init
+	.long _sys_fanotify_mark
+	.long _sys_prlimit64
+	.long _sys_cacheflush
+	.long _sys_name_to_handle_at	/* 375 */
+	.long _sys_open_by_handle_at
+	.long _sys_clock_adjtime
+	.long _sys_syncfs
+	.long _sys_setns
+	.long _sys_sendmmsg		/* 380 */
+	.long _sys_process_vm_readv
+	.long _sys_process_vm_writev
+	.long _sys_kcmp
+	.long _sys_finit_module
+	.long _sys_sched_setattr	/* 385 */
+	.long _sys_sched_getattr
+	.long _sys_renameat2
+	.long _sys_seccomp
+	.long _sys_getrandom
+	.long _sys_memfd_create		/* 390 */
+	.long _sys_bpf
+	.long _sys_execveat
+
+	.rept NR_syscalls-(.-_sys_call_table)/4
+	.long _sys_ni_syscall
+	.endr
+END(_sys_call_table)
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-common/head.S b/src/kernel/linux/v4.14/arch/blackfin/mach-common/head.S
new file mode 100644
index 0000000..31515f0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-common/head.S
@@ -0,0 +1,229 @@
+/*
+ * Common Blackfin startup code
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/blackfin.h>
+#include <asm/thread_info.h>
+#include <asm/trace.h>
+#include <asm/asm-offsets.h>
+
+__INIT
+
+ENTRY(__init_clear_bss)
+	r2 = r2 - r1;
+	cc = r2 == 0;
+	if cc jump .L_bss_done;
+	r2 >>= 2;
+	p1 = r1;
+	p2 = r2;
+	lsetup (1f, 1f) lc0 = p2;
+1:	[p1++] = r0;
+.L_bss_done:
+	rts;
+ENDPROC(__init_clear_bss)
+
+ENTRY(__start)
+	/* R0: argument of command line string, passed from uboot, save it */
+	R7 = R0;
+
+	/* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+	R0 = SYSCFG_SNEN;
+#else
+	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
+	SYSCFG = R0;
+
+	/* Optimization register tricks: keep a base value in the
+	 * reserved P registers so we use the load/store with an
+	 * offset syntax.  R0 = [P5 + <constant>];
+	 *   P5 - core MMR base
+	 *   R6 - 0
+	 */
+	r6 = 0;
+	p5.l = 0;
+	p5.h = hi(COREMMR_BASE);
+
+	/* Zero out registers required by Blackfin ABI */
+
+	/* Disable circular buffers */
+	L0 = r6;
+	L1 = r6;
+	L2 = r6;
+	L3 = r6;
+
+	/* Disable hardware loops in case we were started by 'go' */
+	LC0 = r6;
+	LC1 = r6;
+
+	/*
+	 * Clear ITEST_COMMAND and DTEST_COMMAND registers,
+	 * Leaving these as non-zero can confuse the emulator
+	 */
+	[p5 + (DTEST_COMMAND - COREMMR_BASE)] = r6;
+	[p5 + (ITEST_COMMAND - COREMMR_BASE)] = r6;
+	CSYNC;
+
+	trace_buffer_init(p0,r0);
+
+	/* Turn off the icache */
+	r1 = [p5 + (IMEM_CONTROL - COREMMR_BASE)];
+	BITCLR (r1, ENICPLB_P);
+	[p5 + (IMEM_CONTROL - COREMMR_BASE)] = r1;
+	SSYNC;
+
+	/* Turn off the dcache */
+	r1 = [p5 + (DMEM_CONTROL - COREMMR_BASE)];
+	BITCLR (r1, ENDCPLB_P);
+	[p5 + (DMEM_CONTROL - COREMMR_BASE)] = r1;
+	SSYNC;
+
+	/* in case of double faults, save a few things */
+	p1.l = _initial_pda;
+	p1.h = _initial_pda;
+	r4 = RETX;
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/* Only save these if we are storing them,
+	 * This happens here, since L1 gets clobbered
+	 * below
+	 */
+	GET_PDA(p0, r0);
+	r0 = [p0 + PDA_DF_RETX];
+	r1 = [p0 + PDA_DF_DCPLB];
+	r2 = [p0 + PDA_DF_ICPLB];
+	r3 = [p0 + PDA_DF_SEQSTAT];
+	[p1 + PDA_INIT_DF_RETX] = r0;
+	[p1 + PDA_INIT_DF_DCPLB] = r1;
+	[p1 + PDA_INIT_DF_ICPLB] = r2;
+	[p1 + PDA_INIT_DF_SEQSTAT] = r3;
+#endif
+	[p1 + PDA_INIT_RETX] = r4;
+
+	/* Initialize stack pointer */
+	sp.l = _init_thread_union + THREAD_SIZE;
+	sp.h = _init_thread_union + THREAD_SIZE;
+	fp = sp;
+	usp = sp;
+
+#ifdef CONFIG_EARLY_PRINTK
+	call _init_early_exception_vectors;
+	r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+	sti r0;
+#endif
+
+	r0 = r6;
+	/* Zero out all of the fun bss regions */
+#if L1_DATA_A_LENGTH > 0
+	r1.l = __sbss_l1;
+	r1.h = __sbss_l1;
+	r2.l = __ebss_l1;
+	r2.h = __ebss_l1;
+	call __init_clear_bss
+#endif
+#if L1_DATA_B_LENGTH > 0
+	r1.l = __sbss_b_l1;
+	r1.h = __sbss_b_l1;
+	r2.l = __ebss_b_l1;
+	r2.h = __ebss_b_l1;
+	call __init_clear_bss
+#endif
+#if L2_LENGTH > 0
+	r1.l = __sbss_l2;
+	r1.h = __sbss_l2;
+	r2.l = __ebss_l2;
+	r2.h = __ebss_l2;
+	call __init_clear_bss
+#endif
+	r1.l = ___bss_start;
+	r1.h = ___bss_start;
+	r2.l = ___bss_stop;
+	r2.h = ___bss_stop;
+	call __init_clear_bss
+
+	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
+	call _bfin_relocate_l1_mem;
+
+#ifdef CONFIG_ROMKERNEL
+	call _bfin_relocate_xip_data;
+#endif
+
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+	/* Only use on-chip scratch space for stack when absolutely required
+	 * to avoid Anomaly 05000227 ... we know the init_clocks() func only
+	 * uses L1 text and stack space and no other memory region.
+	 */
+# define KERNEL_CLOCK_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
+	sp.l = lo(KERNEL_CLOCK_STACK);
+	sp.h = hi(KERNEL_CLOCK_STACK);
+	call _init_clocks;
+	sp = usp;	/* usp hasn't been touched, so restore from there */
+#endif
+
+	/* This section keeps the processor in supervisor mode
+	 * during kernel boot.  Switches to user mode at end of boot.
+	 * See page 3-9 of Hardware Reference manual for documentation.
+	 */
+
+	/* EVT15 = _real_start */
+
+	p1.l = _real_start;
+	p1.h = _real_start;
+	[p5 + (EVT15 - COREMMR_BASE)] = p1;
+	csync;
+
+#ifdef CONFIG_EARLY_PRINTK
+	r0 = (EVT_IVG15 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU) (z);
+#else
+	r0 = EVT_IVG15 (z);
+#endif
+	sti r0;
+
+	raise 15;
+#ifdef CONFIG_EARLY_PRINTK
+	p0.l = _early_trap;
+	p0.h = _early_trap;
+#else
+	p0.l = .LWAIT_HERE;
+	p0.h = .LWAIT_HERE;
+#endif
+	reti = p0;
+#if ANOMALY_05000281
+	nop; nop; nop;
+#endif
+	rti;
+
+.LWAIT_HERE:
+	jump .LWAIT_HERE;
+ENDPROC(__start)
+
+/* A little BF561 glue ... */
+#ifndef WDOG_CTL
+# define WDOG_CTL WDOGA_CTL
+#endif
+
+ENTRY(_real_start)
+	/* Enable nested interrupts */
+	[--sp] = reti;
+	/* watchdog off for now */
+	p0.l = lo(WDOG_CTL);
+	p0.h = hi(WDOG_CTL);
+	r0 = 0xAD6(z);
+	w[p0] = r0;
+	ssync;
+	/* Pass the u-boot arguments to the global value command line */
+	R0 = R7;
+	call _cmdline_init;
+
+	sp += -12 + 4; /* +4 is for reti loading above */
+	call _init_pda
+	sp += 12;
+	jump.l _start_kernel;
+ENDPROC(_real_start)
+
+__FINIT
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-common/interrupt.S b/src/kernel/linux/v4.14/arch/blackfin/mach-common/interrupt.S
new file mode 100644
index 0000000..469ce72
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-common/interrupt.S
@@ -0,0 +1,326 @@
+/*
+ * Interrupt Entries
+ *
+ * Copyright 2005-2009 Analog Devices Inc.
+ *               D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>
+ *               Kenneth Albanowski <kjahds@kjahds.com>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <asm/blackfin.h>
+#include <mach/irq.h>
+#include <linux/linkage.h>
+#include <asm/entry.h>
+#include <asm/asm-offsets.h>
+#include <asm/trace.h>
+#include <asm/traps.h>
+#include <asm/thread_info.h>
+
+#include <asm/context.S>
+
+.extern _ret_from_exception
+
+#ifdef CONFIG_I_ENTRY_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 4 	/* just in case */
+
+/* Common interrupt entry code.	 First we do CLI, then push
+ * RETI, to keep interrupts disabled, but to allow this state to be changed
+ * by local_bh_enable.
+ * R0 contains the interrupt number, while R1 may contain the value of IPEND,
+ * or garbage if IPEND won't be needed by the ISR.  */
+__common_int_entry:
+	[--sp] = fp;
+	[--sp] = usp;
+
+	[--sp] = i0;
+	[--sp] = i1;
+	[--sp] = i2;
+	[--sp] = i3;
+
+	[--sp] = m0;
+	[--sp] = m1;
+	[--sp] = m2;
+	[--sp] = m3;
+
+	[--sp] = l0;
+	[--sp] = l1;
+	[--sp] = l2;
+	[--sp] = l3;
+
+	[--sp] = b0;
+	[--sp] = b1;
+	[--sp] = b2;
+	[--sp] = b3;
+	[--sp] = a0.x;
+	[--sp] = a0.w;
+	[--sp] = a1.x;
+	[--sp] = a1.w;
+
+	[--sp] = LC0;
+	[--sp] = LC1;
+	[--sp] = LT0;
+	[--sp] = LT1;
+	[--sp] = LB0;
+	[--sp] = LB1;
+
+	[--sp] = ASTAT;
+
+	[--sp] = r0;	/* Skip reserved */
+	[--sp] = RETS;
+	r2 = RETI;
+	[--sp] = r2;
+	[--sp] = RETX;
+	[--sp] = RETN;
+	[--sp] = RETE;
+	[--sp] = SEQSTAT;
+	[--sp] = r1;	/* IPEND - R1 may or may not be set up before jumping here. */
+
+	/* Switch to other method of keeping interrupts disabled.  */
+#ifdef CONFIG_DEBUG_HWERR
+	r1 = 0x3f;
+	sti r1;
+#else
+	cli r1;
+#endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+	[--sp] = r0;
+	sp += -12;
+	call _trace_hardirqs_off;
+	sp += 12;
+	r0 = [sp++];
+#endif
+	[--sp] = RETI;  /* orig_pc */
+	/* Clear all L registers.  */
+	r1 = 0 (x);
+	l0 = r1;
+	l1 = r1;
+	l2 = r1;
+	l3 = r1;
+#ifdef CONFIG_FRAME_POINTER
+	fp = 0;
+#endif
+
+	ANOMALY_283_315_WORKAROUND(p5, r7)
+
+	r1 =  sp;
+	SP += -12;
+#ifdef CONFIG_IPIPE
+	call ___ipipe_grab_irq
+	SP += 12;
+	cc = r0 == 0;
+	if cc jump .Lcommon_restore_context;
+#else /* CONFIG_IPIPE */
+
+#ifdef CONFIG_PREEMPT
+	r7 = sp;
+	r4.l = lo(ALIGN_PAGE_MASK);
+	r4.h = hi(ALIGN_PAGE_MASK);
+	r7 = r7 & r4;
+	p5 = r7;
+	r7 = [p5 + TI_PREEMPT]; /* get preempt count */
+	r7 += 1;                /* increment it */
+	[p5 + TI_PREEMPT] = r7;
+#endif
+	pseudo_long_call _do_irq, p2;
+
+#ifdef CONFIG_PREEMPT
+	r7 += -1;
+	[p5 + TI_PREEMPT] = r7; /* restore preempt count */
+#endif
+
+	SP += 12;
+#endif /* CONFIG_IPIPE */
+	pseudo_long_call _return_from_int, p2;
+.Lcommon_restore_context:
+	RESTORE_CONTEXT
+	rti;
+
+/* interrupt routine for ivhw - 5 */
+ENTRY(_evt_ivhw)
+	/* In case a single action kicks off multiple memory transactions, (like
+	 * a cache line fetch, - this can cause multiple hardware errors, let's
+	 * catch them all. First - make sure all the actions are complete, and
+	 * the core sees the hardware errors.
+	 */
+	SSYNC;
+	SSYNC;
+
+	SAVE_ALL_SYS
+#ifdef CONFIG_FRAME_POINTER
+	fp = 0;
+#endif
+
+	ANOMALY_283_315_WORKAROUND(p5, r7)
+
+	/* Handle all stacked hardware errors
+	 * To make sure we don't hang forever, only do it 10 times
+	 */
+	R0 = 0;
+	R2 = 10;
+1:
+	P0.L = LO(ILAT);
+	P0.H = HI(ILAT);
+	R1 = [P0];
+	CC = BITTST(R1, EVT_IVHW_P);
+	IF ! CC JUMP 2f;
+	/* OK a hardware error is pending - clear it */
+	R1 = EVT_IVHW_P;
+	[P0] = R1;
+	R0 += 1;
+	CC = R1 == R2;
+	if CC JUMP 2f;
+	JUMP 1b;
+2:
+	# We are going to dump something out, so make sure we print IPEND properly
+	p2.l = lo(IPEND);
+	p2.h = hi(IPEND);
+	r0 = [p2];
+	[sp + PT_IPEND] = r0;
+
+	/* set the EXCAUSE to HWERR for trap_c */
+	r0 = [sp + PT_SEQSTAT];
+	R1.L = LO(VEC_HWERR);
+	R1.H = HI(VEC_HWERR);
+	R0 = R0 | R1;
+	[sp + PT_SEQSTAT] = R0;
+
+	r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
+	SP += -12;
+	pseudo_long_call _trap_c, p5;
+	SP += 12;
+
+#ifdef EBIU_ERRMST
+	/* make sure EBIU_ERRMST is clear */
+	p0.l = LO(EBIU_ERRMST);
+	p0.h = HI(EBIU_ERRMST);
+	r0.l = (CORE_ERROR | CORE_MERROR);
+	w[p0] = r0.l;
+#endif
+
+	pseudo_long_call _ret_from_exception, p2;
+
+.Lcommon_restore_all_sys:
+	RESTORE_ALL_SYS
+	rti;
+ENDPROC(_evt_ivhw)
+
+/* Interrupt routine for evt2 (NMI).
+ * For inner circle type details, please see:
+ * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi
+ */
+ENTRY(_evt_nmi)
+#ifndef CONFIG_NMI_WATCHDOG
+.weak _evt_nmi
+#else
+	/* Not take account of CPLBs, this handler will not return */
+	SAVE_ALL_SYS
+	r0 = sp;
+	r1 = retn;
+	[sp + PT_PC] = r1;
+	trace_buffer_save(p4,r5);
+
+	ANOMALY_283_315_WORKAROUND(p4, r5)
+
+	SP += -12;
+	call _do_nmi;
+	SP += 12;
+1:
+	jump 1b;
+#endif
+	rtn;
+ENDPROC(_evt_nmi)
+
+/* interrupt routine for core timer - 6 */
+ENTRY(_evt_timer)
+	TIMER_INTERRUPT_ENTRY(EVT_IVTMR_P)
+
+/* interrupt routine for evt7 - 7 */
+ENTRY(_evt_evt7)
+	INTERRUPT_ENTRY(EVT_IVG7_P)
+ENTRY(_evt_evt8)
+	INTERRUPT_ENTRY(EVT_IVG8_P)
+ENTRY(_evt_evt9)
+	INTERRUPT_ENTRY(EVT_IVG9_P)
+ENTRY(_evt_evt10)
+	INTERRUPT_ENTRY(EVT_IVG10_P)
+ENTRY(_evt_evt11)
+	INTERRUPT_ENTRY(EVT_IVG11_P)
+ENTRY(_evt_evt12)
+	INTERRUPT_ENTRY(EVT_IVG12_P)
+ENTRY(_evt_evt13)
+	INTERRUPT_ENTRY(EVT_IVG13_P)
+
+
+ /* interrupt routine for system_call - 15 */
+ENTRY(_evt_system_call)
+	SAVE_CONTEXT_SYSCALL
+#ifdef CONFIG_FRAME_POINTER
+	fp = 0;
+#endif
+	pseudo_long_call _system_call, p2;
+	jump .Lcommon_restore_context;
+ENDPROC(_evt_system_call)
+
+#ifdef CONFIG_IPIPE
+/*
+ * __ipipe_call_irqtail: lowers the current priority level to EVT15
+ * before running a user-defined routine, then raises the priority
+ * level to EVT14 to prepare the caller for a normal interrupt
+ * return through RTI.
+ *
+ * We currently use this feature in two occasions:
+ *
+ * - before branching to __ipipe_irq_tail_hook as requested by a high
+ *   priority domain after the pipeline delivered an interrupt,
+ *   e.g. such as Xenomai, in order to start its rescheduling
+ *   procedure, since we may not switch tasks when IRQ levels are
+ *   nested on the Blackfin, so we have to fake an interrupt return
+ *   so that we may reschedule immediately.
+ *
+ * - before branching to __ipipe_sync_root(), in order to play any interrupt
+ *   pending for the root domain (i.e. the Linux kernel). This lowers
+ *   the core priority level enough so that Linux IRQ handlers may
+ *   never delay interrupts handled by high priority domains; we defer
+ *   those handlers until this point instead. This is a substitute
+ *   to using a threaded interrupt model for the Linux kernel.
+ *
+ * r0: address of user-defined routine
+ * context: caller must have preempted EVT15, hw interrupts must be off.
+ */
+ENTRY(___ipipe_call_irqtail)
+	p0 = r0;
+	r0.l = 1f;
+	r0.h = 1f;
+	reti = r0;
+	rti;
+1:
+	[--sp] = rets;
+	[--sp] = ( r7:4, p5:3 );
+	sp += -12;
+	call (p0);
+	sp += 12;
+	( r7:4, p5:3 ) = [sp++];
+	rets = [sp++];
+
+#ifdef CONFIG_DEBUG_HWERR
+	/* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */
+	r0 = (EVT_IVG14 | EVT_IVHW | \
+		EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#else
+	/* Only enable irq14 interrupt, until we transition to _evt_evt14 */
+	r0 = (EVT_IVG14 | \
+		EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#endif
+	sti r0;
+	raise 14;		/* Branches to _evt_evt14 */
+2:
+	jump 2b;                /* Likely paranoid. */
+ENDPROC(___ipipe_call_irqtail)
+
+#endif /* CONFIG_IPIPE */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-common/ints-priority.c b/src/kernel/linux/v4.14/arch/blackfin/mach-common/ints-priority.c
new file mode 100644
index 0000000..13e94bf
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-common/ints-priority.c
@@ -0,0 +1,1366 @@
+/*
+ * Set up the interrupt priorities
+ *
+ * Copyright  2004-2009 Analog Devices Inc.
+ *                 2003 Bas Vermeulen <bas@buyways.nl>
+ *                 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ *            2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ *                 1999 D. Jeff Dionne <jeff@uclinux.org>
+ *                 1996 Roman Zippel
+ *
+ * Licensed under the GPL-2
+ */
+
+#include <linux/module.h>
+#include <linux/kernel_stat.h>
+#include <linux/seq_file.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/syscore_ops.h>
+#include <linux/gpio.h>
+#include <asm/delay.h>
+#ifdef CONFIG_IPIPE
+#include <linux/ipipe.h>
+#endif
+#include <asm/traps.h>
+#include <asm/blackfin.h>
+#include <asm/irq_handler.h>
+#include <asm/dpmc.h>
+#include <asm/traps.h>
+
+/*
+ * NOTES:
+ * - we have separated the physical Hardware interrupt from the
+ * levels that the LINUX kernel sees (see the description in irq.h)
+ * -
+ */
+
+#ifndef CONFIG_SMP
+/* Initialize this to an actual value to force it into the .data
+ * section so that we know it is properly initialized at entry into
+ * the kernel but before bss is initialized to zero (which is where
+ * it would live otherwise).  The 0x1f magic represents the IRQs we
+ * cannot actually mask out in hardware.
+ */
+unsigned long bfin_irq_flags = 0x1f;
+EXPORT_SYMBOL(bfin_irq_flags);
+#endif
+
+#ifdef CONFIG_PM
+unsigned long bfin_sic_iwr[3];	/* Up to 3 SIC_IWRx registers */
+unsigned vr_wakeup;
+#endif
+
+#ifndef SEC_GCTL
+static struct ivgx {
+	/* irq number for request_irq, available in mach-bf5xx/irq.h */
+	unsigned int irqno;
+	/* corresponding bit in the SIC_ISR register */
+	unsigned int isrflag;
+} ivg_table[NR_PERI_INTS];
+
+static struct ivg_slice {
+	/* position of first irq in ivg_table for given ivg */
+	struct ivgx *ifirst;
+	struct ivgx *istop;
+} ivg7_13[IVG13 - IVG7 + 1];
+
+
+/*
+ * Search SIC_IAR and fill tables with the irqvalues
+ * and their positions in the SIC_ISR register.
+ */
+static void __init search_IAR(void)
+{
+	unsigned ivg, irq_pos = 0;
+	for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
+		int irqN;
+
+		ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
+
+		for (irqN = 0; irqN < NR_PERI_INTS; irqN += 4) {
+			int irqn;
+			u32 iar =
+				bfin_read32((unsigned long *)SIC_IAR0 +
+#if defined(CONFIG_BF51x) || defined(CONFIG_BF52x) || \
+	defined(CONFIG_BF538) || defined(CONFIG_BF539)
+				((irqN % 32) >> 3) + ((irqN / 32) * ((SIC_IAR4 - SIC_IAR0) / 4))
+#else
+				(irqN >> 3)
+#endif
+				);
+			for (irqn = irqN; irqn < irqN + 4; ++irqn) {
+				int iar_shift = (irqn & 7) * 4;
+				if (ivg == (0xf & (iar >> iar_shift))) {
+					ivg_table[irq_pos].irqno = IVG7 + irqn;
+					ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
+					ivg7_13[ivg].istop++;
+					irq_pos++;
+				}
+			}
+		}
+	}
+}
+#endif
+
+/*
+ * This is for core internal IRQs
+ */
+void bfin_ack_noop(struct irq_data *d)
+{
+	/* Dummy function.  */
+}
+
+static void bfin_core_mask_irq(struct irq_data *d)
+{
+	bfin_irq_flags &= ~(1 << d->irq);
+	if (!hard_irqs_disabled())
+		hard_local_irq_enable();
+}
+
+static void bfin_core_unmask_irq(struct irq_data *d)
+{
+	bfin_irq_flags |= 1 << d->irq;
+	/*
+	 * If interrupts are enabled, IMASK must contain the same value
+	 * as bfin_irq_flags.  Make sure that invariant holds.  If interrupts
+	 * are currently disabled we need not do anything; one of the
+	 * callers will take care of setting IMASK to the proper value
+	 * when reenabling interrupts.
+	 * local_irq_enable just does "STI bfin_irq_flags", so it's exactly
+	 * what we need.
+	 */
+	if (!hard_irqs_disabled())
+		hard_local_irq_enable();
+	return;
+}
+
+#ifndef SEC_GCTL
+void bfin_internal_mask_irq(unsigned int irq)
+{
+	unsigned long flags = hard_local_irq_save();
+#ifdef SIC_IMASK0
+	unsigned mask_bank = BFIN_SYSIRQ(irq) / 32;
+	unsigned mask_bit = BFIN_SYSIRQ(irq) % 32;
+	bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
+			~(1 << mask_bit));
+# if defined(CONFIG_SMP) || defined(CONFIG_ICC)
+	bfin_write_SICB_IMASK(mask_bank, bfin_read_SICB_IMASK(mask_bank) &
+			~(1 << mask_bit));
+# endif
+#else
+	bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
+			~(1 << BFIN_SYSIRQ(irq)));
+#endif /* end of SIC_IMASK0 */
+	hard_local_irq_restore(flags);
+}
+
+static void bfin_internal_mask_irq_chip(struct irq_data *d)
+{
+	bfin_internal_mask_irq(d->irq);
+}
+
+#ifdef CONFIG_SMP
+void bfin_internal_unmask_irq_affinity(unsigned int irq,
+		const struct cpumask *affinity)
+#else
+void bfin_internal_unmask_irq(unsigned int irq)
+#endif
+{
+	unsigned long flags = hard_local_irq_save();
+
+#ifdef SIC_IMASK0
+	unsigned mask_bank = BFIN_SYSIRQ(irq) / 32;
+	unsigned mask_bit = BFIN_SYSIRQ(irq) % 32;
+# ifdef CONFIG_SMP
+	if (cpumask_test_cpu(0, affinity))
+# endif
+		bfin_write_SIC_IMASK(mask_bank,
+				bfin_read_SIC_IMASK(mask_bank) |
+				(1 << mask_bit));
+# ifdef CONFIG_SMP
+	if (cpumask_test_cpu(1, affinity))
+		bfin_write_SICB_IMASK(mask_bank,
+				bfin_read_SICB_IMASK(mask_bank) |
+				(1 << mask_bit));
+# endif
+#else
+	bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
+			(1 << BFIN_SYSIRQ(irq)));
+#endif
+	hard_local_irq_restore(flags);
+}
+
+#ifdef CONFIG_SMP
+static void bfin_internal_unmask_irq_chip(struct irq_data *d)
+{
+	bfin_internal_unmask_irq_affinity(d->irq,
+					  irq_data_get_affinity_mask(d));
+}
+
+static int bfin_internal_set_affinity(struct irq_data *d,
+				      const struct cpumask *mask, bool force)
+{
+	bfin_internal_mask_irq(d->irq);
+	bfin_internal_unmask_irq_affinity(d->irq, mask);
+
+	return 0;
+}
+#else
+static void bfin_internal_unmask_irq_chip(struct irq_data *d)
+{
+	bfin_internal_unmask_irq(d->irq);
+}
+#endif
+
+#if defined(CONFIG_PM)
+int bfin_internal_set_wake(unsigned int irq, unsigned int state)
+{
+	u32 bank, bit, wakeup = 0;
+	unsigned long flags;
+	bank = BFIN_SYSIRQ(irq) / 32;
+	bit = BFIN_SYSIRQ(irq) % 32;
+
+	switch (irq) {
+#ifdef IRQ_RTC
+	case IRQ_RTC:
+	wakeup |= WAKE;
+	break;
+#endif
+#ifdef IRQ_CAN0_RX
+	case IRQ_CAN0_RX:
+	wakeup |= CANWE;
+	break;
+#endif
+#ifdef IRQ_CAN1_RX
+	case IRQ_CAN1_RX:
+	wakeup |= CANWE;
+	break;
+#endif
+#ifdef IRQ_USB_INT0
+	case IRQ_USB_INT0:
+	wakeup |= USBWE;
+	break;
+#endif
+#ifdef CONFIG_BF54x
+	case IRQ_CNT:
+	wakeup |= ROTWE;
+	break;
+#endif
+	default:
+	break;
+	}
+
+	flags = hard_local_irq_save();
+
+	if (state) {
+		bfin_sic_iwr[bank] |= (1 << bit);
+		vr_wakeup  |= wakeup;
+
+	} else {
+		bfin_sic_iwr[bank] &= ~(1 << bit);
+		vr_wakeup  &= ~wakeup;
+	}
+
+	hard_local_irq_restore(flags);
+
+	return 0;
+}
+
+static int bfin_internal_set_wake_chip(struct irq_data *d, unsigned int state)
+{
+	return bfin_internal_set_wake(d->irq, state);
+}
+#else
+inline int bfin_internal_set_wake(unsigned int irq, unsigned int state)
+{
+	return 0;
+}
+# define bfin_internal_set_wake_chip NULL
+#endif
+
+#else /* SEC_GCTL */
+static void bfin_sec_preflow_handler(struct irq_data *d)
+{
+	unsigned long flags = hard_local_irq_save();
+	unsigned int sid = BFIN_SYSIRQ(d->irq);
+
+	bfin_write_SEC_SCI(0, SEC_CSID, sid);
+
+	hard_local_irq_restore(flags);
+}
+
+static void bfin_sec_mask_ack_irq(struct irq_data *d)
+{
+	unsigned long flags = hard_local_irq_save();
+	unsigned int sid = BFIN_SYSIRQ(d->irq);
+
+	bfin_write_SEC_SCI(0, SEC_CSID, sid);
+
+	hard_local_irq_restore(flags);
+}
+
+static void bfin_sec_unmask_irq(struct irq_data *d)
+{
+	unsigned long flags = hard_local_irq_save();
+	unsigned int sid = BFIN_SYSIRQ(d->irq);
+
+	bfin_write32(SEC_END, sid);
+
+	hard_local_irq_restore(flags);
+}
+
+static void bfin_sec_enable_ssi(unsigned int sid)
+{
+	unsigned long flags = hard_local_irq_save();
+	uint32_t reg_sctl = bfin_read_SEC_SCTL(sid);
+
+	reg_sctl |= SEC_SCTL_SRC_EN;
+	bfin_write_SEC_SCTL(sid, reg_sctl);
+
+	hard_local_irq_restore(flags);
+}
+
+static void bfin_sec_disable_ssi(unsigned int sid)
+{
+	unsigned long flags = hard_local_irq_save();
+	uint32_t reg_sctl = bfin_read_SEC_SCTL(sid);
+
+	reg_sctl &= ((uint32_t)~SEC_SCTL_SRC_EN);
+	bfin_write_SEC_SCTL(sid, reg_sctl);
+
+	hard_local_irq_restore(flags);
+}
+
+static void bfin_sec_set_ssi_coreid(unsigned int sid, unsigned int coreid)
+{
+	unsigned long flags = hard_local_irq_save();
+	uint32_t reg_sctl = bfin_read_SEC_SCTL(sid);
+
+	reg_sctl &= ((uint32_t)~SEC_SCTL_CTG);
+	bfin_write_SEC_SCTL(sid, reg_sctl | ((coreid << 20) & SEC_SCTL_CTG));
+
+	hard_local_irq_restore(flags);
+}
+
+static void bfin_sec_enable_sci(unsigned int sid)
+{
+	unsigned long flags = hard_local_irq_save();
+	uint32_t reg_sctl = bfin_read_SEC_SCTL(sid);
+
+	if (sid == BFIN_SYSIRQ(IRQ_WATCH0))
+		reg_sctl |= SEC_SCTL_FAULT_EN;
+	else
+		reg_sctl |= SEC_SCTL_INT_EN;
+	bfin_write_SEC_SCTL(sid, reg_sctl);
+
+	hard_local_irq_restore(flags);
+}
+
+static void bfin_sec_disable_sci(unsigned int sid)
+{
+	unsigned long flags = hard_local_irq_save();
+	uint32_t reg_sctl = bfin_read_SEC_SCTL(sid);
+
+	reg_sctl &= ((uint32_t)~SEC_SCTL_INT_EN);
+	bfin_write_SEC_SCTL(sid, reg_sctl);
+
+	hard_local_irq_restore(flags);
+}
+
+static void bfin_sec_enable(struct irq_data *d)
+{
+	unsigned long flags = hard_local_irq_save();
+	unsigned int sid = BFIN_SYSIRQ(d->irq);
+
+	bfin_sec_enable_sci(sid);
+	bfin_sec_enable_ssi(sid);
+
+	hard_local_irq_restore(flags);
+}
+
+static void bfin_sec_disable(struct irq_data *d)
+{
+	unsigned long flags = hard_local_irq_save();
+	unsigned int sid = BFIN_SYSIRQ(d->irq);
+
+	bfin_sec_disable_sci(sid);
+	bfin_sec_disable_ssi(sid);
+
+	hard_local_irq_restore(flags);
+}
+
+static void bfin_sec_set_priority(unsigned int sec_int_levels, u8 *sec_int_priority)
+{
+	unsigned long flags = hard_local_irq_save();
+	uint32_t reg_sctl;
+	int i;
+
+	bfin_write_SEC_SCI(0, SEC_CPLVL, sec_int_levels);
+
+	for (i = 0; i < SYS_IRQS - BFIN_IRQ(0); i++) {
+		reg_sctl = bfin_read_SEC_SCTL(i) & ~SEC_SCTL_PRIO;
+		reg_sctl |= sec_int_priority[i] << SEC_SCTL_PRIO_OFFSET;
+		bfin_write_SEC_SCTL(i, reg_sctl);
+	}
+
+	hard_local_irq_restore(flags);
+}
+
+void bfin_sec_raise_irq(unsigned int irq)
+{
+	unsigned long flags = hard_local_irq_save();
+	unsigned int sid = BFIN_SYSIRQ(irq);
+
+	bfin_write32(SEC_RAISE, sid);
+
+	hard_local_irq_restore(flags);
+}
+
+static void init_software_driven_irq(void)
+{
+	bfin_sec_set_ssi_coreid(34, 0);
+	bfin_sec_set_ssi_coreid(35, 1);
+
+	bfin_sec_enable_sci(35);
+	bfin_sec_enable_ssi(35);
+	bfin_sec_set_ssi_coreid(36, 0);
+	bfin_sec_set_ssi_coreid(37, 1);
+	bfin_sec_enable_sci(37);
+	bfin_sec_enable_ssi(37);
+}
+
+void handle_sec_sfi_fault(uint32_t gstat)
+{
+
+}
+
+void handle_sec_sci_fault(uint32_t gstat)
+{
+	uint32_t core_id;
+	uint32_t cstat;
+
+	core_id = gstat & SEC_GSTAT_SCI;
+	cstat = bfin_read_SEC_SCI(core_id, SEC_CSTAT);
+	if (cstat & SEC_CSTAT_ERR) {
+		switch (cstat & SEC_CSTAT_ERRC) {
+		case SEC_CSTAT_ACKERR:
+			printk(KERN_DEBUG "sec ack err\n");
+			break;
+		default:
+			printk(KERN_DEBUG "sec sci unknown err\n");
+		}
+	}
+
+}
+
+void handle_sec_ssi_fault(uint32_t gstat)
+{
+	uint32_t sid;
+	uint32_t sstat;
+
+	sid = gstat & SEC_GSTAT_SID;
+	sstat = bfin_read_SEC_SSTAT(sid);
+
+}
+
+void handle_sec_fault(uint32_t sec_gstat)
+{
+	if (sec_gstat & SEC_GSTAT_ERR) {
+
+		switch (sec_gstat & SEC_GSTAT_ERRC) {
+		case 0:
+			handle_sec_sfi_fault(sec_gstat);
+			break;
+		case SEC_GSTAT_SCIERR:
+			handle_sec_sci_fault(sec_gstat);
+			break;
+		case SEC_GSTAT_SSIERR:
+			handle_sec_ssi_fault(sec_gstat);
+			break;
+		}
+
+
+	}
+}
+
+static struct irqaction bfin_fault_irq = {
+	.name = "Blackfin fault",
+};
+
+static irqreturn_t bfin_fault_routine(int irq, void *data)
+{
+	struct pt_regs *fp = get_irq_regs();
+
+	switch (irq) {
+	case IRQ_C0_DBL_FAULT:
+		double_fault_c(fp);
+		break;
+	case IRQ_C0_HW_ERR:
+		dump_bfin_process(fp);
+		dump_bfin_mem(fp);
+		show_regs(fp);
+		printk(KERN_NOTICE "Kernel Stack\n");
+		show_stack(current, NULL);
+		print_modules();
+		panic("Core 0 hardware error");
+		break;
+	case IRQ_C0_NMI_L1_PARITY_ERR:
+		panic("Core 0 NMI L1 parity error");
+		break;
+	case IRQ_SEC_ERR:
+		pr_err("SEC error\n");
+		handle_sec_fault(bfin_read32(SEC_GSTAT));
+		break;
+	default:
+		panic("Unknown fault %d", irq);
+	}
+
+	return IRQ_HANDLED;
+}
+#endif /* SEC_GCTL */
+
+static struct irq_chip bfin_core_irqchip = {
+	.name = "CORE",
+	.irq_mask = bfin_core_mask_irq,
+	.irq_unmask = bfin_core_unmask_irq,
+};
+
+#ifndef SEC_GCTL
+static struct irq_chip bfin_internal_irqchip = {
+	.name = "INTN",
+	.irq_mask = bfin_internal_mask_irq_chip,
+	.irq_unmask = bfin_internal_unmask_irq_chip,
+	.irq_disable = bfin_internal_mask_irq_chip,
+	.irq_enable = bfin_internal_unmask_irq_chip,
+#ifdef CONFIG_SMP
+	.irq_set_affinity = bfin_internal_set_affinity,
+#endif
+	.irq_set_wake = bfin_internal_set_wake_chip,
+};
+#else
+static struct irq_chip bfin_sec_irqchip = {
+	.name = "SEC",
+	.irq_mask_ack = bfin_sec_mask_ack_irq,
+	.irq_mask = bfin_sec_mask_ack_irq,
+	.irq_unmask = bfin_sec_unmask_irq,
+	.irq_eoi = bfin_sec_unmask_irq,
+	.irq_disable = bfin_sec_disable,
+	.irq_enable = bfin_sec_enable,
+};
+#endif
+
+void bfin_handle_irq(unsigned irq)
+{
+#ifdef CONFIG_IPIPE
+	struct pt_regs regs;    /* Contents not used. */
+	ipipe_trace_irq_entry(irq);
+	__ipipe_handle_irq(irq, &regs);
+	ipipe_trace_irq_exit(irq);
+#else /* !CONFIG_IPIPE */
+	generic_handle_irq(irq);
+#endif  /* !CONFIG_IPIPE */
+}
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static int mac_stat_int_mask;
+
+static void bfin_mac_status_ack_irq(unsigned int irq)
+{
+	switch (irq) {
+	case IRQ_MAC_MMCINT:
+		bfin_write_EMAC_MMC_TIRQS(
+			bfin_read_EMAC_MMC_TIRQE() &
+			bfin_read_EMAC_MMC_TIRQS());
+		bfin_write_EMAC_MMC_RIRQS(
+			bfin_read_EMAC_MMC_RIRQE() &
+			bfin_read_EMAC_MMC_RIRQS());
+		break;
+	case IRQ_MAC_RXFSINT:
+		bfin_write_EMAC_RX_STKY(
+			bfin_read_EMAC_RX_IRQE() &
+			bfin_read_EMAC_RX_STKY());
+		break;
+	case IRQ_MAC_TXFSINT:
+		bfin_write_EMAC_TX_STKY(
+			bfin_read_EMAC_TX_IRQE() &
+			bfin_read_EMAC_TX_STKY());
+		break;
+	case IRQ_MAC_WAKEDET:
+		 bfin_write_EMAC_WKUP_CTL(
+			bfin_read_EMAC_WKUP_CTL() | MPKS | RWKS);
+		break;
+	default:
+		/* These bits are W1C */
+		bfin_write_EMAC_SYSTAT(1L << (irq - IRQ_MAC_PHYINT));
+		break;
+	}
+}
+
+static void bfin_mac_status_mask_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	mac_stat_int_mask &= ~(1L << (irq - IRQ_MAC_PHYINT));
+#ifdef BF537_FAMILY
+	switch (irq) {
+	case IRQ_MAC_PHYINT:
+		bfin_write_EMAC_SYSCTL(bfin_read_EMAC_SYSCTL() & ~PHYIE);
+		break;
+	default:
+		break;
+	}
+#else
+	if (!mac_stat_int_mask)
+		bfin_internal_mask_irq(IRQ_MAC_ERROR);
+#endif
+	bfin_mac_status_ack_irq(irq);
+}
+
+static void bfin_mac_status_unmask_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+#ifdef BF537_FAMILY
+	switch (irq) {
+	case IRQ_MAC_PHYINT:
+		bfin_write_EMAC_SYSCTL(bfin_read_EMAC_SYSCTL() | PHYIE);
+		break;
+	default:
+		break;
+	}
+#else
+	if (!mac_stat_int_mask)
+		bfin_internal_unmask_irq(IRQ_MAC_ERROR);
+#endif
+	mac_stat_int_mask |= 1L << (irq - IRQ_MAC_PHYINT);
+}
+
+#ifdef CONFIG_PM
+int bfin_mac_status_set_wake(struct irq_data *d, unsigned int state)
+{
+#ifdef BF537_FAMILY
+	return bfin_internal_set_wake(IRQ_GENERIC_ERROR, state);
+#else
+	return bfin_internal_set_wake(IRQ_MAC_ERROR, state);
+#endif
+}
+#else
+# define bfin_mac_status_set_wake NULL
+#endif
+
+static struct irq_chip bfin_mac_status_irqchip = {
+	.name = "MACST",
+	.irq_mask = bfin_mac_status_mask_irq,
+	.irq_unmask = bfin_mac_status_unmask_irq,
+	.irq_set_wake = bfin_mac_status_set_wake,
+};
+
+void bfin_demux_mac_status_irq(struct irq_desc *inta_desc)
+{
+	int i, irq = 0;
+	u32 status = bfin_read_EMAC_SYSTAT();
+
+	for (i = 0; i <= (IRQ_MAC_STMDONE - IRQ_MAC_PHYINT); i++)
+		if (status & (1L << i)) {
+			irq = IRQ_MAC_PHYINT + i;
+			break;
+		}
+
+	if (irq) {
+		if (mac_stat_int_mask & (1L << (irq - IRQ_MAC_PHYINT))) {
+			bfin_handle_irq(irq);
+		} else {
+			bfin_mac_status_ack_irq(irq);
+			pr_debug("IRQ %d:"
+					" MASKED MAC ERROR INTERRUPT ASSERTED\n",
+					irq);
+		}
+	} else
+		printk(KERN_ERR
+				"%s : %s : LINE %d :\nIRQ ?: MAC ERROR"
+				" INTERRUPT ASSERTED BUT NO SOURCE FOUND"
+				"(EMAC_SYSTAT=0x%X)\n",
+				__func__, __FILE__, __LINE__, status);
+}
+#endif
+
+static inline void bfin_set_irq_handler(struct irq_data *d, irq_flow_handler_t handle)
+{
+#ifdef CONFIG_IPIPE
+	handle = handle_level_irq;
+#endif
+	irq_set_handler_locked(d, handle);
+}
+
+#ifdef CONFIG_GPIO_ADI
+
+static DECLARE_BITMAP(gpio_enabled, MAX_BLACKFIN_GPIOS);
+
+static void bfin_gpio_ack_irq(struct irq_data *d)
+{
+	/* AFAIK ack_irq in case mask_ack is provided
+	 * get's only called for edge sense irqs
+	 */
+	set_gpio_data(irq_to_gpio(d->irq), 0);
+}
+
+static void bfin_gpio_mask_ack_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+	u32 gpionr = irq_to_gpio(irq);
+
+	if (!irqd_is_level_type(d))
+		set_gpio_data(gpionr, 0);
+
+	set_gpio_maska(gpionr, 0);
+}
+
+static void bfin_gpio_mask_irq(struct irq_data *d)
+{
+	set_gpio_maska(irq_to_gpio(d->irq), 0);
+}
+
+static void bfin_gpio_unmask_irq(struct irq_data *d)
+{
+	set_gpio_maska(irq_to_gpio(d->irq), 1);
+}
+
+static unsigned int bfin_gpio_irq_startup(struct irq_data *d)
+{
+	u32 gpionr = irq_to_gpio(d->irq);
+
+	if (__test_and_set_bit(gpionr, gpio_enabled))
+		bfin_gpio_irq_prepare(gpionr);
+
+	bfin_gpio_unmask_irq(d);
+
+	return 0;
+}
+
+static void bfin_gpio_irq_shutdown(struct irq_data *d)
+{
+	u32 gpionr = irq_to_gpio(d->irq);
+
+	bfin_gpio_mask_irq(d);
+	__clear_bit(gpionr, gpio_enabled);
+	bfin_gpio_irq_free(gpionr);
+}
+
+static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type)
+{
+	unsigned int irq = d->irq;
+	int ret;
+	char buf[16];
+	u32 gpionr = irq_to_gpio(irq);
+
+	if (type == IRQ_TYPE_PROBE) {
+		/* only probe unenabled GPIO interrupt lines */
+		if (test_bit(gpionr, gpio_enabled))
+			return 0;
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+	}
+
+	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
+		    IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+
+		snprintf(buf, 16, "gpio-irq%d", irq);
+		ret = bfin_gpio_irq_request(gpionr, buf);
+		if (ret)
+			return ret;
+
+		if (__test_and_set_bit(gpionr, gpio_enabled))
+			bfin_gpio_irq_prepare(gpionr);
+
+	} else {
+		__clear_bit(gpionr, gpio_enabled);
+		return 0;
+	}
+
+	set_gpio_inen(gpionr, 0);
+	set_gpio_dir(gpionr, 0);
+
+	if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+	    == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+		set_gpio_both(gpionr, 1);
+	else
+		set_gpio_both(gpionr, 0);
+
+	if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
+		set_gpio_polar(gpionr, 1);	/* low or falling edge denoted by one */
+	else
+		set_gpio_polar(gpionr, 0);	/* high or rising edge denoted by zero */
+
+	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+		set_gpio_edge(gpionr, 1);
+		set_gpio_inen(gpionr, 1);
+		set_gpio_data(gpionr, 0);
+
+	} else {
+		set_gpio_edge(gpionr, 0);
+		set_gpio_inen(gpionr, 1);
+	}
+
+	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+		bfin_set_irq_handler(d, handle_edge_irq);
+	else
+		bfin_set_irq_handler(d, handle_level_irq);
+
+	return 0;
+}
+
+static void bfin_demux_gpio_block(unsigned int irq)
+{
+	unsigned int gpio, mask;
+
+	gpio = irq_to_gpio(irq);
+	mask = get_gpiop_data(gpio) & get_gpiop_maska(gpio);
+
+	while (mask) {
+		if (mask & 1)
+			bfin_handle_irq(irq);
+		irq++;
+		mask >>= 1;
+	}
+}
+
+void bfin_demux_gpio_irq(struct irq_desc *desc)
+{
+	unsigned int inta_irq = irq_desc_get_irq(desc);
+	unsigned int irq;
+
+	switch (inta_irq) {
+#if defined(BF537_FAMILY)
+	case IRQ_PF_INTA_PG_INTA:
+		bfin_demux_gpio_block(IRQ_PF0);
+		irq = IRQ_PG0;
+		break;
+	case IRQ_PH_INTA_MAC_RX:
+		irq = IRQ_PH0;
+		break;
+#elif defined(BF533_FAMILY)
+	case IRQ_PROG_INTA:
+		irq = IRQ_PF0;
+		break;
+#elif defined(BF538_FAMILY)
+	case IRQ_PORTF_INTA:
+		irq = IRQ_PF0;
+		break;
+#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+	case IRQ_PORTF_INTA:
+		irq = IRQ_PF0;
+		break;
+	case IRQ_PORTG_INTA:
+		irq = IRQ_PG0;
+		break;
+	case IRQ_PORTH_INTA:
+		irq = IRQ_PH0;
+		break;
+#elif defined(CONFIG_BF561)
+	case IRQ_PROG0_INTA:
+		irq = IRQ_PF0;
+		break;
+	case IRQ_PROG1_INTA:
+		irq = IRQ_PF16;
+		break;
+	case IRQ_PROG2_INTA:
+		irq = IRQ_PF32;
+		break;
+#endif
+	default:
+		BUG();
+		return;
+	}
+
+	bfin_demux_gpio_block(irq);
+}
+
+#ifdef CONFIG_PM
+
+static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state)
+{
+	return bfin_gpio_pm_wakeup_ctrl(irq_to_gpio(d->irq), state);
+}
+
+#else
+
+# define bfin_gpio_set_wake NULL
+
+#endif
+
+static struct irq_chip bfin_gpio_irqchip = {
+	.name = "GPIO",
+	.irq_ack = bfin_gpio_ack_irq,
+	.irq_mask = bfin_gpio_mask_irq,
+	.irq_mask_ack = bfin_gpio_mask_ack_irq,
+	.irq_unmask = bfin_gpio_unmask_irq,
+	.irq_disable = bfin_gpio_mask_irq,
+	.irq_enable = bfin_gpio_unmask_irq,
+	.irq_set_type = bfin_gpio_irq_type,
+	.irq_startup = bfin_gpio_irq_startup,
+	.irq_shutdown = bfin_gpio_irq_shutdown,
+	.irq_set_wake = bfin_gpio_set_wake,
+};
+
+#endif
+
+#ifdef CONFIG_PM
+
+#ifdef SEC_GCTL
+static u32 save_pint_sec_ctl[NR_PINT_SYS_IRQS];
+
+static int sec_suspend(void)
+{
+	u32 bank;
+
+	for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++)
+		save_pint_sec_ctl[bank] = bfin_read_SEC_SCTL(bank + BFIN_SYSIRQ(IRQ_PINT0));
+	return 0;
+}
+
+static void sec_resume(void)
+{
+	u32 bank;
+
+	bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_RESET);
+	udelay(100);
+	bfin_write_SEC_GCTL(SEC_GCTL_EN);
+	bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_EN | SEC_CCTL_NMI_EN);
+
+	for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++)
+		bfin_write_SEC_SCTL(bank + BFIN_SYSIRQ(IRQ_PINT0), save_pint_sec_ctl[bank]);
+}
+
+static struct syscore_ops sec_pm_syscore_ops = {
+	.suspend = sec_suspend,
+	.resume = sec_resume,
+};
+#endif
+
+#endif
+
+void init_exception_vectors(void)
+{
+	/* cannot program in software:
+	 * evt0 - emulation (jtag)
+	 * evt1 - reset
+	 */
+	bfin_write_EVT2(evt_nmi);
+	bfin_write_EVT3(trap);
+	bfin_write_EVT5(evt_ivhw);
+	bfin_write_EVT6(evt_timer);
+	bfin_write_EVT7(evt_evt7);
+	bfin_write_EVT8(evt_evt8);
+	bfin_write_EVT9(evt_evt9);
+	bfin_write_EVT10(evt_evt10);
+	bfin_write_EVT11(evt_evt11);
+	bfin_write_EVT12(evt_evt12);
+	bfin_write_EVT13(evt_evt13);
+	bfin_write_EVT14(evt_evt14);
+	bfin_write_EVT15(evt_system_call);
+	CSYNC();
+}
+
+#ifndef SEC_GCTL
+/*
+ * This function should be called during kernel startup to initialize
+ * the BFin IRQ handling routines.
+ */
+
+int __init init_arch_irq(void)
+{
+	int irq;
+	unsigned long ilat = 0;
+
+	/*  Disable all the peripheral intrs  - page 4-29 HW Ref manual */
+#ifdef SIC_IMASK0
+	bfin_write_SIC_IMASK0(SIC_UNMASK_ALL);
+	bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
+# ifdef SIC_IMASK2
+	bfin_write_SIC_IMASK2(SIC_UNMASK_ALL);
+# endif
+# if defined(CONFIG_SMP) || defined(CONFIG_ICC)
+	bfin_write_SICB_IMASK0(SIC_UNMASK_ALL);
+	bfin_write_SICB_IMASK1(SIC_UNMASK_ALL);
+# endif
+#else
+	bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
+#endif
+
+	local_irq_disable();
+
+	for (irq = 0; irq <= SYS_IRQS; irq++) {
+		if (irq <= IRQ_CORETMR)
+			irq_set_chip(irq, &bfin_core_irqchip);
+		else
+			irq_set_chip(irq, &bfin_internal_irqchip);
+
+		switch (irq) {
+#if !BFIN_GPIO_PINT
+#if defined(BF537_FAMILY)
+		case IRQ_PH_INTA_MAC_RX:
+		case IRQ_PF_INTA_PG_INTA:
+#elif defined(BF533_FAMILY)
+		case IRQ_PROG_INTA:
+#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+		case IRQ_PORTF_INTA:
+		case IRQ_PORTG_INTA:
+		case IRQ_PORTH_INTA:
+#elif defined(CONFIG_BF561)
+		case IRQ_PROG0_INTA:
+		case IRQ_PROG1_INTA:
+		case IRQ_PROG2_INTA:
+#elif defined(BF538_FAMILY)
+		case IRQ_PORTF_INTA:
+#endif
+			irq_set_chained_handler(irq, bfin_demux_gpio_irq);
+			break;
+#endif
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+		case IRQ_MAC_ERROR:
+			irq_set_chained_handler(irq,
+						bfin_demux_mac_status_irq);
+			break;
+#endif
+#if defined(CONFIG_SMP) || defined(CONFIG_ICC)
+		case IRQ_SUPPLE_0:
+		case IRQ_SUPPLE_1:
+			irq_set_handler(irq, handle_percpu_irq);
+			break;
+#endif
+
+#ifdef CONFIG_TICKSOURCE_CORETMR
+		case IRQ_CORETMR:
+# ifdef CONFIG_SMP
+			irq_set_handler(irq, handle_percpu_irq);
+# else
+			irq_set_handler(irq, handle_simple_irq);
+# endif
+			break;
+#endif
+
+#ifdef CONFIG_TICKSOURCE_GPTMR0
+		case IRQ_TIMER0:
+			irq_set_handler(irq, handle_simple_irq);
+			break;
+#endif
+
+		default:
+#ifdef CONFIG_IPIPE
+			irq_set_handler(irq, handle_level_irq);
+#else
+			irq_set_handler(irq, handle_simple_irq);
+#endif
+			break;
+		}
+	}
+
+	init_mach_irq();
+
+#if (defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
+	for (irq = IRQ_MAC_PHYINT; irq <= IRQ_MAC_STMDONE; irq++)
+		irq_set_chip_and_handler(irq, &bfin_mac_status_irqchip,
+					 handle_level_irq);
+#endif
+	/* if configured as edge, then will be changed to do_edge_IRQ */
+#ifdef CONFIG_GPIO_ADI
+	for (irq = GPIO_IRQ_BASE;
+		irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++)
+		irq_set_chip_and_handler(irq, &bfin_gpio_irqchip,
+					 handle_level_irq);
+#endif
+	bfin_write_IMASK(0);
+	CSYNC();
+	ilat = bfin_read_ILAT();
+	CSYNC();
+	bfin_write_ILAT(ilat);
+	CSYNC();
+
+	printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n");
+	/* IMASK=xxx is equivalent to STI xx or bfin_irq_flags=xx,
+	 * local_irq_enable()
+	 */
+	program_IAR();
+	/* Therefore it's better to setup IARs before interrupts enabled */
+	search_IAR();
+
+	/* Enable interrupts IVG7-15 */
+	bfin_irq_flags |= IMASK_IVG15 |
+		IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
+		IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
+
+
+	/* This implicitly covers ANOMALY_05000171
+	 * Boot-ROM code modifies SICA_IWRx wakeup registers
+	 */
+#ifdef SIC_IWR0
+	bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
+# ifdef SIC_IWR1
+	/* BF52x/BF51x system reset does not properly reset SIC_IWR1 which
+	 * will screw up the bootrom as it relies on MDMA0/1 waking it
+	 * up from IDLE instructions.  See this report for more info:
+	 * http://blackfin.uclinux.org/gf/tracker/4323
+	 */
+	if (ANOMALY_05000435)
+		bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+	else
+		bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+# endif
+# ifdef SIC_IWR2
+	bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
+# endif
+#else
+	bfin_write_SIC_IWR(IWR_DISABLE_ALL);
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_DO_IRQ_L1
+__attribute__((l1_text))
+#endif
+static int vec_to_irq(int vec)
+{
+	struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
+	struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
+	unsigned long sic_status[3];
+	if (likely(vec == EVT_IVTMR_P))
+		return IRQ_CORETMR;
+#ifdef SIC_ISR
+	sic_status[0] = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
+#else
+	if (smp_processor_id()) {
+# ifdef SICB_ISR0
+		/* This will be optimized out in UP mode. */
+		sic_status[0] = bfin_read_SICB_ISR0() & bfin_read_SICB_IMASK0();
+		sic_status[1] = bfin_read_SICB_ISR1() & bfin_read_SICB_IMASK1();
+# endif
+	} else {
+		sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
+		sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1();
+	}
+#endif
+#ifdef SIC_ISR2
+	sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2();
+#endif
+
+	for (;; ivg++) {
+		if (ivg >= ivg_stop)
+			return -1;
+#ifdef SIC_ISR
+		if (sic_status[0] & ivg->isrflag)
+#else
+		if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag)
+#endif
+			return ivg->irqno;
+	}
+}
+
+#else /* SEC_GCTL */
+
+/*
+ * This function should be called during kernel startup to initialize
+ * the BFin IRQ handling routines.
+ */
+
+int __init init_arch_irq(void)
+{
+	int irq;
+	unsigned long ilat = 0;
+
+	bfin_write_SEC_GCTL(SEC_GCTL_RESET);
+
+	local_irq_disable();
+
+	for (irq = 0; irq <= SYS_IRQS; irq++) {
+		if (irq <= IRQ_CORETMR) {
+			irq_set_chip_and_handler(irq, &bfin_core_irqchip,
+				handle_simple_irq);
+#if defined(CONFIG_TICKSOURCE_CORETMR) && defined(CONFIG_SMP)
+			if (irq == IRQ_CORETMR)
+				irq_set_handler(irq, handle_percpu_irq);
+#endif
+		} else if (irq >= BFIN_IRQ(34) && irq <= BFIN_IRQ(37)) {
+			irq_set_chip_and_handler(irq, &bfin_sec_irqchip,
+				handle_percpu_irq);
+		} else {
+			irq_set_chip(irq, &bfin_sec_irqchip);
+			irq_set_handler(irq, handle_fasteoi_irq);
+			__irq_set_preflow_handler(irq, bfin_sec_preflow_handler);
+		}
+	}
+
+	bfin_write_IMASK(0);
+	CSYNC();
+	ilat = bfin_read_ILAT();
+	CSYNC();
+	bfin_write_ILAT(ilat);
+	CSYNC();
+
+	printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n");
+
+	bfin_sec_set_priority(CONFIG_SEC_IRQ_PRIORITY_LEVELS, sec_int_priority);
+
+	/* Enable interrupts IVG7-15 */
+	bfin_irq_flags |= IMASK_IVG15 |
+	    IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
+	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
+
+
+	bfin_write_SEC_FCTL(SEC_FCTL_EN | SEC_FCTL_SYSRST_EN | SEC_FCTL_FLTIN_EN);
+	bfin_sec_enable_sci(BFIN_SYSIRQ(IRQ_WATCH0));
+	bfin_sec_enable_ssi(BFIN_SYSIRQ(IRQ_WATCH0));
+	bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_RESET);
+	udelay(100);
+	bfin_write_SEC_GCTL(SEC_GCTL_EN);
+	bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_EN | SEC_CCTL_NMI_EN);
+	bfin_write_SEC_SCI(1, SEC_CCTL, SEC_CCTL_EN | SEC_CCTL_NMI_EN);
+
+	init_software_driven_irq();
+
+#ifdef CONFIG_PM
+	register_syscore_ops(&sec_pm_syscore_ops);
+#endif
+
+	bfin_fault_irq.handler = bfin_fault_routine;
+#ifdef CONFIG_L1_PARITY_CHECK
+	setup_irq(IRQ_C0_NMI_L1_PARITY_ERR, &bfin_fault_irq);
+#endif
+	setup_irq(IRQ_C0_DBL_FAULT, &bfin_fault_irq);
+	setup_irq(IRQ_SEC_ERR, &bfin_fault_irq);
+
+	return 0;
+}
+
+#ifdef CONFIG_DO_IRQ_L1
+__attribute__((l1_text))
+#endif
+static int vec_to_irq(int vec)
+{
+	if (likely(vec == EVT_IVTMR_P))
+		return IRQ_CORETMR;
+
+	return BFIN_IRQ(bfin_read_SEC_SCI(0, SEC_CSID));
+}
+#endif  /* SEC_GCTL */
+
+#ifdef CONFIG_DO_IRQ_L1
+__attribute__((l1_text))
+#endif
+void do_irq(int vec, struct pt_regs *fp)
+{
+	int irq = vec_to_irq(vec);
+	if (irq == -1)
+		return;
+	asm_do_IRQ(irq, fp);
+}
+
+#ifdef CONFIG_IPIPE
+
+int __ipipe_get_irq_priority(unsigned irq)
+{
+	int ient, prio;
+
+	if (irq <= IRQ_CORETMR)
+		return irq;
+
+#ifdef SEC_GCTL
+	if (irq >= BFIN_IRQ(0))
+		return IVG11;
+#else
+	for (ient = 0; ient < NR_PERI_INTS; ient++) {
+		struct ivgx *ivg = ivg_table + ient;
+		if (ivg->irqno == irq) {
+			for (prio = 0; prio <= IVG13-IVG7; prio++) {
+				if (ivg7_13[prio].ifirst <= ivg &&
+				    ivg7_13[prio].istop > ivg)
+					return IVG7 + prio;
+			}
+		}
+	}
+#endif
+
+	return IVG15;
+}
+
+/* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */
+#ifdef CONFIG_DO_IRQ_L1
+__attribute__((l1_text))
+#endif
+asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
+{
+	struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
+	struct ipipe_domain *this_domain = __ipipe_current_domain;
+	int irq, s = 0;
+
+	irq = vec_to_irq(vec);
+	if (irq == -1)
+		return 0;
+
+	if (irq == IRQ_SYSTMR) {
+#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || defined(CONFIG_TICKSOURCE_GPTMR0)
+		bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
+#endif
+		/* This is basically what we need from the register frame. */
+		__this_cpu_write(__ipipe_tick_regs.ipend, regs->ipend);
+		__this_cpu_write(__ipipe_tick_regs.pc, regs->pc);
+		if (this_domain != ipipe_root_domain)
+			__this_cpu_and(__ipipe_tick_regs.ipend, ~0x10);
+		else
+			__this_cpu_or(__ipipe_tick_regs.ipend, 0x10);
+	}
+
+	/*
+	 * We don't want Linux interrupt handlers to run at the
+	 * current core priority level (i.e. < EVT15), since this
+	 * might delay other interrupts handled by a high priority
+	 * domain. Here is what we do instead:
+	 *
+	 * - we raise the SYNCDEFER bit to prevent
+	 * __ipipe_handle_irq() to sync the pipeline for the root
+	 * stage for the incoming interrupt. Upon return, that IRQ is
+	 * pending in the interrupt log.
+	 *
+	 * - we raise the TIF_IRQ_SYNC bit for the current thread, so
+	 * that _schedule_and_signal_from_int will eventually sync the
+	 * pipeline from EVT15.
+	 */
+	if (this_domain == ipipe_root_domain) {
+		s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+		barrier();
+	}
+
+	ipipe_trace_irq_entry(irq);
+	__ipipe_handle_irq(irq, regs);
+	ipipe_trace_irq_exit(irq);
+
+	if (user_mode(regs) &&
+	    !ipipe_test_foreign_stack() &&
+	    (current->ipipe_flags & PF_EVTRET) != 0) {
+		/*
+		 * Testing for user_regs() does NOT fully eliminate
+		 * foreign stack contexts, because of the forged
+		 * interrupt returns we do through
+		 * __ipipe_call_irqtail. In that case, we might have
+		 * preempted a foreign stack context in a high
+		 * priority domain, with a single interrupt level now
+		 * pending after the irqtail unwinding is done. In
+		 * which case user_mode() is now true, and the event
+		 * gets dispatched spuriously.
+		 */
+		current->ipipe_flags &= ~PF_EVTRET;
+		__ipipe_dispatch_event(IPIPE_EVENT_RETURN, regs);
+	}
+
+	if (this_domain == ipipe_root_domain) {
+		set_thread_flag(TIF_IRQ_SYNC);
+		if (!s) {
+			__clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+			return !test_bit(IPIPE_STALL_FLAG, &p->status);
+		}
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_IPIPE */
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-common/pm.c b/src/kernel/linux/v4.14/arch/blackfin/mach-common/pm.c
new file mode 100644
index 0000000..5ece38a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-common/pm.c
@@ -0,0 +1,301 @@
+/*
+ * Blackfin power management
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2
+ * based on arm/mach-omap/pm.c
+ *    Copyright 2001, Cliff Brake <cbrake@accelent.com> and others
+ */
+
+#include <linux/suspend.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <asm/cplb.h>
+#include <asm/dma.h>
+#include <asm/dpmc.h>
+#include <asm/pm.h>
+
+#ifdef CONFIG_BF60x
+struct bfin_cpu_pm_fns *bfin_cpu_pm;
+#endif
+
+void bfin_pm_suspend_standby_enter(void)
+{
+#if !BFIN_GPIO_PINT
+	bfin_pm_standby_setup();
+#endif
+
+#ifdef CONFIG_BF60x
+	bfin_cpu_pm->enter(PM_SUSPEND_STANDBY);
+#else
+# ifdef CONFIG_PM_BFIN_SLEEP_DEEPER
+	sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
+# else
+	sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
+# endif
+#endif
+
+#if !BFIN_GPIO_PINT
+	bfin_pm_standby_restore();
+#endif
+
+#ifndef CONFIG_BF60x
+#ifdef SIC_IWR0
+	bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
+# ifdef SIC_IWR1
+	/* BF52x system reset does not properly reset SIC_IWR1 which
+	 * will screw up the bootrom as it relies on MDMA0/1 waking it
+	 * up from IDLE instructions.  See this report for more info:
+	 * http://blackfin.uclinux.org/gf/tracker/4323
+	 */
+	if (ANOMALY_05000435)
+		bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+	else
+		bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+# endif
+# ifdef SIC_IWR2
+	bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
+# endif
+#else
+	bfin_write_SIC_IWR(IWR_DISABLE_ALL);
+#endif
+
+#endif
+}
+
+int bf53x_suspend_l1_mem(unsigned char *memptr)
+{
+	dma_memcpy_nocache(memptr, (const void *) L1_CODE_START,
+			L1_CODE_LENGTH);
+	dma_memcpy_nocache(memptr + L1_CODE_LENGTH,
+			(const void *) L1_DATA_A_START, L1_DATA_A_LENGTH);
+	dma_memcpy_nocache(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH,
+			(const void *) L1_DATA_B_START, L1_DATA_B_LENGTH);
+	memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH +
+			L1_DATA_B_LENGTH, (const void *) L1_SCRATCH_START,
+			L1_SCRATCH_LENGTH);
+
+	return 0;
+}
+
+int bf53x_resume_l1_mem(unsigned char *memptr)
+{
+	dma_memcpy_nocache((void *) L1_CODE_START, memptr, L1_CODE_LENGTH);
+	dma_memcpy_nocache((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH,
+			L1_DATA_A_LENGTH);
+	dma_memcpy_nocache((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH +
+			L1_DATA_A_LENGTH, L1_DATA_B_LENGTH);
+	memcpy((void *) L1_SCRATCH_START, memptr + L1_CODE_LENGTH +
+			L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, L1_SCRATCH_LENGTH);
+
+	return 0;
+}
+
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
+# ifdef CONFIG_BF60x
+__attribute__((l1_text))
+# endif
+static void flushinv_all_dcache(void)
+{
+	register u32 way, bank, subbank, set;
+	register u32 status, addr;
+	u32 dmem_ctl = bfin_read_DMEM_CONTROL();
+
+	for (bank = 0; bank < 2; ++bank) {
+		if (!(dmem_ctl & (1 << (DMC1_P - bank))))
+			continue;
+
+		for (way = 0; way < 2; ++way)
+			for (subbank = 0; subbank < 4; ++subbank)
+				for (set = 0; set < 64; ++set) {
+
+					bfin_write_DTEST_COMMAND(
+						way << 26 |
+						bank << 23 |
+						subbank << 16 |
+						set << 5
+					);
+					CSYNC();
+					status = bfin_read_DTEST_DATA0();
+
+					/* only worry about valid/dirty entries */
+					if ((status & 0x3) != 0x3)
+						continue;
+
+
+					/* construct the address using the tag */
+					addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
+
+					/* flush it */
+					__asm__ __volatile__("FLUSHINV[%0];" : : "a"(addr));
+				}
+	}
+}
+#endif
+
+int bfin_pm_suspend_mem_enter(void)
+{
+	int ret;
+#ifndef CONFIG_BF60x
+	int wakeup;
+#endif
+
+	unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH
+					 + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH,
+					  GFP_ATOMIC);
+
+	if (memptr == NULL) {
+		panic("bf53x_suspend_l1_mem malloc failed");
+		return -ENOMEM;
+	}
+
+#ifndef CONFIG_BF60x
+	wakeup = bfin_read_VR_CTL() & ~FREQ;
+	wakeup |= SCKELOW;
+
+#ifdef CONFIG_PM_BFIN_WAKE_PH6
+	wakeup |= PHYWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_GP
+	wakeup |= GPWE;
+#endif
+#endif
+
+	ret = blackfin_dma_suspend();
+
+	if (ret) {
+		kfree(memptr);
+		return ret;
+	}
+
+#ifdef CONFIG_GPIO_ADI
+	bfin_gpio_pm_hibernate_suspend();
+#endif
+
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
+	flushinv_all_dcache();
+	udelay(1);
+#endif
+	_disable_dcplb();
+	_disable_icplb();
+	bf53x_suspend_l1_mem(memptr);
+
+#ifndef CONFIG_BF60x
+	do_hibernate(wakeup | vr_wakeup);	/* See you later! */
+#else
+	bfin_cpu_pm->enter(PM_SUSPEND_MEM);
+#endif
+
+	bf53x_resume_l1_mem(memptr);
+
+	_enable_icplb();
+	_enable_dcplb();
+
+#ifdef CONFIG_GPIO_ADI
+	bfin_gpio_pm_hibernate_restore();
+#endif
+	blackfin_dma_resume();
+
+	kfree(memptr);
+
+	return 0;
+}
+
+/*
+ *	bfin_pm_valid - Tell the PM core that we only support the standby sleep
+ *			state
+ *	@state:		suspend state we're checking.
+ *
+ */
+static int bfin_pm_valid(suspend_state_t state)
+{
+	return (state == PM_SUSPEND_STANDBY
+#if !(defined(BF533_FAMILY) || defined(CONFIG_BF561))
+	/*
+	 * On BF533/2/1:
+	 * If we enter Hibernate the SCKE Pin is driven Low,
+	 * so that the SDRAM enters Self Refresh Mode.
+	 * However when the reset sequence that follows hibernate
+	 * state is executed, SCKE is driven High, taking the
+	 * SDRAM out of Self Refresh.
+	 *
+	 * If you reconfigure and access the SDRAM "very quickly",
+	 * you are likely to avoid errors, otherwise the SDRAM
+	 * start losing its contents.
+	 * An external HW workaround is possible using logic gates.
+	 */
+	|| state == PM_SUSPEND_MEM
+#endif
+	);
+}
+
+/*
+ *	bfin_pm_enter - Actually enter a sleep state.
+ *	@state:		State we're entering.
+ *
+ */
+static int bfin_pm_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		bfin_pm_suspend_standby_enter();
+		break;
+	case PM_SUSPEND_MEM:
+		bfin_pm_suspend_mem_enter();
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH
+void bfin_pm_end(void)
+{
+	u32 cycle, cycle2;
+	u64 usec64;
+	u32 usec;
+
+	__asm__ __volatile__ (
+		"1: %0 = CYCLES2\n"
+		"%1 = CYCLES\n"
+		"%2 = CYCLES2\n"
+		"CC = %2 == %0\n"
+		"if ! CC jump 1b\n"
+		: "=d,a" (cycle2), "=d,a" (cycle), "=d,a" (usec) : : "CC"
+	);
+
+	usec64 = ((u64)cycle2 << 32) + cycle;
+	do_div(usec64, get_cclk() / USEC_PER_SEC);
+	usec = usec64;
+	if (usec == 0)
+		usec = 1;
+
+	pr_info("PM: resume of kernel completes after  %ld msec %03ld usec\n",
+		usec / USEC_PER_MSEC, usec % USEC_PER_MSEC);
+}
+#endif
+
+static const struct platform_suspend_ops bfin_pm_ops = {
+	.enter = bfin_pm_enter,
+	.valid	= bfin_pm_valid,
+#ifdef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH
+	.end = bfin_pm_end,
+#endif
+};
+
+static int __init bfin_pm_init(void)
+{
+	suspend_set_ops(&bfin_pm_ops);
+	return 0;
+}
+
+__initcall(bfin_pm_init);
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-common/scb-init.c b/src/kernel/linux/v4.14/arch/blackfin/mach-common/scb-init.c
new file mode 100644
index 0000000..8923398
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-common/scb-init.c
@@ -0,0 +1,52 @@
+/*
+ * arch/blackfin/mach-common/scb-init.c - reprogram system cross bar priority
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <asm/scb.h>
+
+__attribute__((l1_text))
+inline void scb_mi_write(unsigned long scb_mi_arbw, unsigned int slots,
+		unsigned char *scb_mi_prio)
+{
+	unsigned int i;
+
+	for (i = 0; i < slots; ++i)
+		bfin_write32(scb_mi_arbw, (i << SCB_SLOT_OFFSET) | scb_mi_prio[i]);
+}
+
+__attribute__((l1_text))
+inline void scb_mi_read(unsigned long scb_mi_arbw, unsigned int slots,
+		unsigned char *scb_mi_prio)
+{
+	unsigned int i;
+
+	for (i = 0; i < slots; ++i) {
+		bfin_write32(scb_mi_arbw, (0xFF << SCB_SLOT_OFFSET) | i);
+		scb_mi_prio[i] = bfin_read32(scb_mi_arbw);
+	}
+}
+
+__attribute__((l1_text))
+void init_scb(void)
+{
+	unsigned int i, j;
+	unsigned char scb_tmp_prio[32];
+
+	pr_info("Init System Crossbar\n");
+	for (i = 0; scb_data[i].scb_mi_arbr > 0; ++i) {
+
+		scb_mi_write(scb_data[i].scb_mi_arbw, scb_data[i].scb_mi_slots, scb_data[i].scb_mi_prio);
+
+		pr_debug("scb priority at 0x%lx:\n", scb_data[i].scb_mi_arbr);
+		scb_mi_read(scb_data[i].scb_mi_arbw, scb_data[i].scb_mi_slots, scb_tmp_prio);
+		for (j = 0; j < scb_data[i].scb_mi_slots; ++j)
+			pr_debug("slot %d = %d\n", j, scb_tmp_prio[j]);
+	}
+
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mach-common/smp.c b/src/kernel/linux/v4.14/arch/blackfin/mach-common/smp.c
new file mode 100644
index 0000000..b32ddab
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mach-common/smp.c
@@ -0,0 +1,432 @@
+/*
+ * IPI management based on arch/arm/kernel/smp.c (Copyright 2002 ARM Limited)
+ *
+ * Copyright 2007-2009 Analog Devices Inc.
+ *                         Philippe Gerum <rpm@xenomai.org>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched/mm.h>
+#include <linux/sched/task_stack.h>
+#include <linux/interrupt.h>
+#include <linux/cache.h>
+#include <linux/clockchips.h>
+#include <linux/profile.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/cpumask.h>
+#include <linux/seq_file.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/atomic.h>
+#include <asm/cacheflush.h>
+#include <asm/irq_handler.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <linux/err.h>
+
+/*
+ * Anomaly notes:
+ * 05000120 - we always define corelock as 32-bit integer in L2
+ */
+struct corelock_slot corelock __attribute__ ((__section__(".l2.bss")));
+
+#ifdef CONFIG_ICACHE_FLUSH_L1
+unsigned long blackfin_iflush_l1_entry[NR_CPUS];
+#endif
+
+struct blackfin_initial_pda initial_pda_coreb;
+
+enum ipi_message_type {
+	BFIN_IPI_NONE,
+	BFIN_IPI_TIMER,
+	BFIN_IPI_RESCHEDULE,
+	BFIN_IPI_CALL_FUNC,
+	BFIN_IPI_CPU_STOP,
+};
+
+struct blackfin_flush_data {
+	unsigned long start;
+	unsigned long end;
+};
+
+void *secondary_stack;
+
+static struct blackfin_flush_data smp_flush_data;
+
+static DEFINE_SPINLOCK(stop_lock);
+
+/* A magic number - stress test shows this is safe for common cases */
+#define BFIN_IPI_MSGQ_LEN 5
+
+/* Simple FIFO buffer, overflow leads to panic */
+struct ipi_data {
+	atomic_t count;
+	atomic_t bits;
+};
+
+static DEFINE_PER_CPU(struct ipi_data, bfin_ipi);
+
+static void ipi_cpu_stop(unsigned int cpu)
+{
+	spin_lock(&stop_lock);
+	printk(KERN_CRIT "CPU%u: stopping\n", cpu);
+	dump_stack();
+	spin_unlock(&stop_lock);
+
+	set_cpu_online(cpu, false);
+
+	local_irq_disable();
+
+	while (1)
+		SSYNC();
+}
+
+static void ipi_flush_icache(void *info)
+{
+	struct blackfin_flush_data *fdata = info;
+
+	/* Invalidate the memory holding the bounds of the flushed region. */
+	blackfin_dcache_invalidate_range((unsigned long)fdata,
+					 (unsigned long)fdata + sizeof(*fdata));
+
+	/* Make sure all write buffers in the data side of the core
+	 * are flushed before trying to invalidate the icache.  This
+	 * needs to be after the data flush and before the icache
+	 * flush so that the SSYNC does the right thing in preventing
+	 * the instruction prefetcher from hitting things in cached
+	 * memory at the wrong time -- it runs much further ahead than
+	 * the pipeline.
+	 */
+	SSYNC();
+
+	/* ipi_flaush_icache is invoked by generic flush_icache_range,
+	 * so call blackfin arch icache flush directly here.
+	 */
+	blackfin_icache_flush_range(fdata->start, fdata->end);
+}
+
+/* Use IRQ_SUPPLE_0 to request reschedule.
+ * When returning from interrupt to user space,
+ * there is chance to reschedule */
+static irqreturn_t ipi_handler_int0(int irq, void *dev_instance)
+{
+	unsigned int cpu = smp_processor_id();
+
+	platform_clear_ipi(cpu, IRQ_SUPPLE_0);
+	return IRQ_HANDLED;
+}
+
+DECLARE_PER_CPU(struct clock_event_device, coretmr_events);
+void ipi_timer(void)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(coretmr_events, cpu);
+	evt->event_handler(evt);
+}
+
+static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
+{
+	struct ipi_data *bfin_ipi_data;
+	unsigned int cpu = smp_processor_id();
+	unsigned long pending;
+	unsigned long msg;
+
+	platform_clear_ipi(cpu, IRQ_SUPPLE_1);
+
+	smp_rmb();
+	bfin_ipi_data = this_cpu_ptr(&bfin_ipi);
+	while ((pending = atomic_xchg(&bfin_ipi_data->bits, 0)) != 0) {
+		msg = 0;
+		do {
+			msg = find_next_bit(&pending, BITS_PER_LONG, msg + 1);
+			switch (msg) {
+			case BFIN_IPI_TIMER:
+				ipi_timer();
+				break;
+			case BFIN_IPI_RESCHEDULE:
+				scheduler_ipi();
+				break;
+			case BFIN_IPI_CALL_FUNC:
+				generic_smp_call_function_interrupt();
+				break;
+			case BFIN_IPI_CPU_STOP:
+				ipi_cpu_stop(cpu);
+				break;
+			default:
+				goto out;
+			}
+			atomic_dec(&bfin_ipi_data->count);
+		} while (msg < BITS_PER_LONG);
+
+	}
+out:
+	return IRQ_HANDLED;
+}
+
+static void bfin_ipi_init(void)
+{
+	unsigned int cpu;
+	struct ipi_data *bfin_ipi_data;
+	for_each_possible_cpu(cpu) {
+		bfin_ipi_data = &per_cpu(bfin_ipi, cpu);
+		atomic_set(&bfin_ipi_data->bits, 0);
+		atomic_set(&bfin_ipi_data->count, 0);
+	}
+}
+
+void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg)
+{
+	unsigned int cpu;
+	struct ipi_data *bfin_ipi_data;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	for_each_cpu(cpu, cpumask) {
+		bfin_ipi_data = &per_cpu(bfin_ipi, cpu);
+		atomic_or((1 << msg), &bfin_ipi_data->bits);
+		atomic_inc(&bfin_ipi_data->count);
+	}
+	local_irq_restore(flags);
+	smp_wmb();
+	for_each_cpu(cpu, cpumask)
+		platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1);
+}
+
+void arch_send_call_function_single_ipi(int cpu)
+{
+	send_ipi(cpumask_of(cpu), BFIN_IPI_CALL_FUNC);
+}
+
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
+{
+	send_ipi(mask, BFIN_IPI_CALL_FUNC);
+}
+
+void smp_send_reschedule(int cpu)
+{
+	send_ipi(cpumask_of(cpu), BFIN_IPI_RESCHEDULE);
+
+	return;
+}
+
+void smp_send_msg(const struct cpumask *mask, unsigned long type)
+{
+	send_ipi(mask, type);
+}
+
+void smp_timer_broadcast(const struct cpumask *mask)
+{
+	smp_send_msg(mask, BFIN_IPI_TIMER);
+}
+
+void smp_send_stop(void)
+{
+	cpumask_t callmap;
+
+	preempt_disable();
+	cpumask_copy(&callmap, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &callmap);
+	if (!cpumask_empty(&callmap))
+		send_ipi(&callmap, BFIN_IPI_CPU_STOP);
+
+	preempt_enable();
+
+	return;
+}
+
+int __cpu_up(unsigned int cpu, struct task_struct *idle)
+{
+	int ret;
+
+	secondary_stack = task_stack_page(idle) + THREAD_SIZE;
+
+	ret = platform_boot_secondary(cpu, idle);
+
+	secondary_stack = NULL;
+
+	return ret;
+}
+
+static void setup_secondary(unsigned int cpu)
+{
+	unsigned long ilat;
+
+	bfin_write_IMASK(0);
+	CSYNC();
+	ilat = bfin_read_ILAT();
+	CSYNC();
+	bfin_write_ILAT(ilat);
+	CSYNC();
+
+	/* Enable interrupt levels IVG7-15. IARs have been already
+	 * programmed by the boot CPU.  */
+	bfin_irq_flags |= IMASK_IVG15 |
+	    IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
+	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
+}
+
+void secondary_start_kernel(void)
+{
+	unsigned int cpu = smp_processor_id();
+	struct mm_struct *mm = &init_mm;
+
+	if (_bfin_swrst & SWRST_DBL_FAULT_B) {
+		printk(KERN_EMERG "CoreB Recovering from DOUBLE FAULT event\n");
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+		printk(KERN_EMERG " While handling exception (EXCAUSE = %#x) at %pF\n",
+			initial_pda_coreb.seqstat_doublefault & SEQSTAT_EXCAUSE,
+			initial_pda_coreb.retx_doublefault);
+		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %pF\n",
+			initial_pda_coreb.dcplb_doublefault_addr);
+		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %pF\n",
+			initial_pda_coreb.icplb_doublefault_addr);
+#endif
+		printk(KERN_NOTICE " The instruction at %pF caused a double exception\n",
+			initial_pda_coreb.retx);
+	}
+
+	/*
+	 * We want the D-cache to be enabled early, in case the atomic
+	 * support code emulates cache coherence (see
+	 * __ARCH_SYNC_CORE_DCACHE).
+	 */
+	init_exception_vectors();
+
+	local_irq_disable();
+
+	/* Attach the new idle task to the global mm. */
+	mmget(mm);
+	mmgrab(mm);
+	current->active_mm = mm;
+
+	preempt_disable();
+
+	setup_secondary(cpu);
+
+	platform_secondary_init(cpu);
+	/* setup local core timer */
+	bfin_local_timer_setup();
+
+	local_irq_enable();
+
+	bfin_setup_caches(cpu);
+
+	notify_cpu_starting(cpu);
+	/*
+	 * Calibrate loops per jiffy value.
+	 * IRQs need to be enabled here - D-cache can be invalidated
+	 * in timer irq handler, so core B can read correct jiffies.
+	 */
+	calibrate_delay();
+
+	/* We are done with local CPU inits, unblock the boot CPU. */
+	set_cpu_online(cpu, true);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+}
+
+void __init smp_prepare_boot_cpu(void)
+{
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	platform_prepare_cpus(max_cpus);
+	bfin_ipi_init();
+	platform_request_ipi(IRQ_SUPPLE_0, ipi_handler_int0);
+	platform_request_ipi(IRQ_SUPPLE_1, ipi_handler_int1);
+}
+
+void __init smp_cpus_done(unsigned int max_cpus)
+{
+	unsigned long bogosum = 0;
+	unsigned int cpu;
+
+	for_each_online_cpu(cpu)
+		bogosum += loops_per_jiffy;
+
+	printk(KERN_INFO "SMP: Total of %d processors activated "
+	       "(%lu.%02lu BogoMIPS).\n",
+	       num_online_cpus(),
+	       bogosum / (500000/HZ),
+	       (bogosum / (5000/HZ)) % 100);
+}
+
+void smp_icache_flush_range_others(unsigned long start, unsigned long end)
+{
+	smp_flush_data.start = start;
+	smp_flush_data.end = end;
+
+	preempt_disable();
+	if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1))
+		printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n");
+	preempt_enable();
+}
+EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
+
+#ifdef __ARCH_SYNC_CORE_ICACHE
+unsigned long icache_invld_count[NR_CPUS];
+void resync_core_icache(void)
+{
+	unsigned int cpu = get_cpu();
+	blackfin_invalidate_entire_icache();
+	icache_invld_count[cpu]++;
+	put_cpu();
+}
+EXPORT_SYMBOL(resync_core_icache);
+#endif
+
+#ifdef __ARCH_SYNC_CORE_DCACHE
+unsigned long dcache_invld_count[NR_CPUS];
+unsigned long barrier_mask __attribute__ ((__section__(".l2.bss")));
+
+void resync_core_dcache(void)
+{
+	unsigned int cpu = get_cpu();
+	blackfin_invalidate_entire_dcache();
+	dcache_invld_count[cpu]++;
+	put_cpu();
+}
+EXPORT_SYMBOL(resync_core_dcache);
+#endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+int __cpu_disable(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	if (cpu == 0)
+		return -EPERM;
+
+	set_cpu_online(cpu, false);
+	return 0;
+}
+
+int __cpu_die(unsigned int cpu)
+{
+	return cpu_wait_death(cpu, 5);
+}
+
+void cpu_die(void)
+{
+	(void)cpu_report_death();
+
+	atomic_dec(&init_mm.mm_users);
+	atomic_dec(&init_mm.mm_count);
+
+	local_irq_disable();
+	platform_cpu_die();
+}
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mm/Makefile b/src/kernel/linux/v4.14/arch/blackfin/mm/Makefile
new file mode 100644
index 0000000..4c011b1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mm/Makefile
@@ -0,0 +1,5 @@
+#
+# arch/blackfin/mm/Makefile
+#
+
+obj-y := sram-alloc.o isram-driver.o init.o maccess.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mm/blackfin_sram.h b/src/kernel/linux/v4.14/arch/blackfin/mm/blackfin_sram.h
new file mode 100644
index 0000000..fb0b159
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mm/blackfin_sram.h
@@ -0,0 +1,14 @@
+/*
+ * Local prototypes meant for internal use only
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BLACKFIN_SRAM_H__
+#define __BLACKFIN_SRAM_H__
+
+extern void *l1sram_alloc(size_t);
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mm/init.c b/src/kernel/linux/v4.14/arch/blackfin/mm/init.c
new file mode 100644
index 0000000..b59cd7c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mm/init.c
@@ -0,0 +1,122 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/gfp.h>
+#include <linux/swap.h>
+#include <linux/bootmem.h>
+#include <linux/uaccess.h>
+#include <linux/export.h>
+#include <asm/bfin-global.h>
+#include <asm/pda.h>
+#include <asm/cplbinit.h>
+#include <asm/early_printk.h>
+#include "blackfin_sram.h"
+
+/*
+ * ZERO_PAGE is a special page that is used for zero-initialized data and COW.
+ * Let the bss do its zero-init magic so we don't have to do it ourselves.
+ */
+char empty_zero_page[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));
+EXPORT_SYMBOL(empty_zero_page);
+
+#ifndef CONFIG_EXCEPTION_L1_SCRATCH
+#if defined CONFIG_SYSCALL_TAB_L1
+__attribute__((l1_data))
+#endif
+static unsigned long exception_stack[NR_CPUS][1024];
+#endif
+
+struct blackfin_pda cpu_pda[NR_CPUS];
+EXPORT_SYMBOL(cpu_pda);
+
+/*
+ * paging_init() continues the virtual memory environment setup which
+ * was begun by the code in arch/head.S.
+ * The parameters are pointers to where to stick the starting and ending
+ * addresses  of available kernel virtual memory.
+ */
+void __init paging_init(void)
+{
+	/*
+	 * make sure start_mem is page aligned, otherwise bootmem and
+	 * page_alloc get different views of the world
+	 */
+	unsigned long end_mem = memory_end & PAGE_MASK;
+
+	unsigned long zones_size[MAX_NR_ZONES] = {
+		[0] = 0,
+		[ZONE_DMA] = (end_mem - CONFIG_PHY_RAM_BASE_ADDRESS) >> PAGE_SHIFT,
+		[ZONE_NORMAL] = 0,
+#ifdef CONFIG_HIGHMEM
+		[ZONE_HIGHMEM] = 0,
+#endif
+	};
+
+	/* Set up SFC/DFC registers (user data space) */
+	set_fs(KERNEL_DS);
+
+	pr_debug("free_area_init -> start_mem is %#lx virtual_end is %#lx\n",
+	        PAGE_ALIGN(memory_start), end_mem);
+	free_area_init_node(0, zones_size,
+		CONFIG_PHY_RAM_BASE_ADDRESS >> PAGE_SHIFT, NULL);
+}
+
+asmlinkage void __init init_pda(void)
+{
+	unsigned int cpu = raw_smp_processor_id();
+
+	early_shadow_stamp();
+
+	/* Initialize the PDA fields holding references to other parts
+	   of the memory. The content of such memory is still
+	   undefined at the time of the call, we are only setting up
+	   valid pointers to it. */
+	memset(&cpu_pda[cpu], 0, sizeof(cpu_pda[cpu]));
+
+#ifdef CONFIG_EXCEPTION_L1_SCRATCH
+	cpu_pda[cpu].ex_stack = (unsigned long *)(L1_SCRATCH_START + \
+					L1_SCRATCH_LENGTH);
+#else
+	cpu_pda[cpu].ex_stack = exception_stack[cpu + 1];
+#endif
+
+#ifdef CONFIG_SMP
+	cpu_pda[cpu].imask = 0x1f;
+#endif
+}
+
+void __init mem_init(void)
+{
+	char buf[64];
+
+	high_memory = (void *)(memory_end & PAGE_MASK);
+	max_mapnr = MAP_NR(high_memory);
+	printk(KERN_DEBUG "Kernel managed physical pages: %lu\n", max_mapnr);
+
+	/* This will put all low memory onto the freelists. */
+	free_all_bootmem();
+
+	snprintf(buf, sizeof(buf) - 1, "%uK DMA", DMA_UNCACHED_REGION >> 10);
+	mem_init_print_info(buf);
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init free_initrd_mem(unsigned long start, unsigned long end)
+{
+#ifndef CONFIG_MPU
+	free_reserved_area((void *)start, (void *)end, -1, "initrd");
+#endif
+}
+#endif
+
+void __ref free_initmem(void)
+{
+#if defined CONFIG_RAMKERNEL && !defined CONFIG_MPU
+	free_initmem_default(-1);
+	if (memory_start == (unsigned long)(&__init_end))
+		memory_start = (unsigned long)(&__init_begin);
+#endif
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mm/isram-driver.c b/src/kernel/linux/v4.14/arch/blackfin/mm/isram-driver.c
new file mode 100644
index 0000000..aaa1e64
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mm/isram-driver.c
@@ -0,0 +1,411 @@
+/*
+ * Instruction SRAM accessor functions for the Blackfin
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#define pr_fmt(fmt) "isram: " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+/*
+ * IMPORTANT WARNING ABOUT THESE FUNCTIONS
+ *
+ * The emulator will not function correctly if a write command is left in
+ * ITEST_COMMAND or DTEST_COMMAND AND access to cache memory is needed by
+ * the emulator. To avoid such problems, ensure that both ITEST_COMMAND
+ * and DTEST_COMMAND are zero when exiting these functions.
+ */
+
+
+/*
+ * On the Blackfin, L1 instruction sram (which operates at core speeds) can not
+ * be accessed by a normal core load, so we need to go through a few hoops to
+ * read/write it.
+ * To try to make it easier - we export a memcpy interface, where either src or
+ * dest can be in this special L1 memory area.
+ * The low level read/write functions should not be exposed to the rest of the
+ * kernel, since they operate on 64-bit data, and need specific address alignment
+ */
+
+static DEFINE_SPINLOCK(dtest_lock);
+
+/* Takes a void pointer */
+#define IADDR2DTEST(x) \
+	({ unsigned long __addr = (unsigned long)(x); \
+		((__addr & (1 << 11)) << (26 - 11)) | /* addr bit 11 (Way0/Way1)   */ \
+		(1 << 24)                           | /* instruction access = 1    */ \
+		((__addr & (1 << 15)) << (23 - 15)) | /* addr bit 15 (Data Bank)   */ \
+		((__addr & (3 << 12)) << (16 - 12)) | /* addr bits 13:12 (Subbank) */ \
+		(__addr & 0x47F8)                   | /* addr bits 14 & 10:3       */ \
+		(1 << 2);                             /* data array = 1            */ \
+	})
+
+/* Takes a pointer, and returns the offset (in bits) which things should be shifted */
+#define ADDR2OFFSET(x) ((((unsigned long)(x)) & 0x7) * 8)
+
+/* Takes a pointer, determines if it is the last byte in the isram 64-bit data type */
+#define ADDR2LAST(x) ((((unsigned long)x) & 0x7) == 0x7)
+
+static void isram_write(const void *addr, uint64_t data)
+{
+	uint32_t cmd;
+	unsigned long flags;
+
+	if (unlikely(addr >= (void *)(L1_CODE_START + L1_CODE_LENGTH)))
+		return;
+
+	cmd = IADDR2DTEST(addr) | 2;             /* write */
+
+	/*
+	 * Writes to DTEST_DATA[0:1] need to be atomic with write to DTEST_COMMAND
+	 * While in exception context - atomicity is guaranteed or double fault
+	 */
+	spin_lock_irqsave(&dtest_lock, flags);
+
+	bfin_write_DTEST_DATA0(data & 0xFFFFFFFF);
+	bfin_write_DTEST_DATA1(data >> 32);
+
+	/* use the builtin, since interrupts are already turned off */
+	__builtin_bfin_csync();
+	bfin_write_DTEST_COMMAND(cmd);
+	__builtin_bfin_csync();
+
+	bfin_write_DTEST_COMMAND(0);
+	__builtin_bfin_csync();
+
+	spin_unlock_irqrestore(&dtest_lock, flags);
+}
+
+static uint64_t isram_read(const void *addr)
+{
+	uint32_t cmd;
+	unsigned long flags;
+	uint64_t ret;
+
+	if (unlikely(addr > (void *)(L1_CODE_START + L1_CODE_LENGTH)))
+		return 0;
+
+	cmd = IADDR2DTEST(addr) | 0;              /* read */
+
+	/*
+	 * Reads of DTEST_DATA[0:1] need to be atomic with write to DTEST_COMMAND
+	 * While in exception context - atomicity is guaranteed or double fault
+	 */
+	spin_lock_irqsave(&dtest_lock, flags);
+	/* use the builtin, since interrupts are already turned off */
+	__builtin_bfin_csync();
+	bfin_write_DTEST_COMMAND(cmd);
+	__builtin_bfin_csync();
+	ret = bfin_read_DTEST_DATA0() | ((uint64_t)bfin_read_DTEST_DATA1() << 32);
+
+	bfin_write_DTEST_COMMAND(0);
+	__builtin_bfin_csync();
+	spin_unlock_irqrestore(&dtest_lock, flags);
+
+	return ret;
+}
+
+static bool isram_check_addr(const void *addr, size_t n)
+{
+	if ((addr >= (void *)L1_CODE_START) &&
+	    (addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))) {
+		if (unlikely((addr + n) > (void *)(L1_CODE_START + L1_CODE_LENGTH))) {
+			show_stack(NULL, NULL);
+			pr_err("copy involving %p length (%zu) too long\n", addr, n);
+		}
+		return true;
+	}
+	return false;
+}
+
+/*
+ * The isram_memcpy() function copies n bytes from memory area src to memory area dest.
+ * The isram_memcpy() function returns a pointer to dest.
+ * Either dest or src can be in L1 instruction sram.
+ */
+void *isram_memcpy(void *dest, const void *src, size_t n)
+{
+	uint64_t data_in = 0, data_out = 0;
+	size_t count;
+	bool dest_in_l1, src_in_l1, need_data, put_data;
+	unsigned char byte, *src_byte, *dest_byte;
+
+	src_byte = (unsigned char *)src;
+	dest_byte = (unsigned char *)dest;
+
+	dest_in_l1 = isram_check_addr(dest, n);
+	src_in_l1 = isram_check_addr(src, n);
+
+	need_data = true;
+	put_data = true;
+	for (count = 0; count < n; count++) {
+		if (src_in_l1) {
+			if (need_data) {
+				data_in = isram_read(src + count);
+				need_data = false;
+			}
+
+			if (ADDR2LAST(src + count))
+				need_data = true;
+
+			byte = (unsigned char)((data_in >> ADDR2OFFSET(src + count)) & 0xff);
+
+		} else {
+			/* src is in L2 or L3 - so just dereference*/
+			byte = src_byte[count];
+		}
+
+		if (dest_in_l1) {
+			if (put_data) {
+				data_out = isram_read(dest + count);
+				put_data = false;
+			}
+
+			data_out &= ~((uint64_t)0xff << ADDR2OFFSET(dest + count));
+			data_out |= ((uint64_t)byte << ADDR2OFFSET(dest + count));
+
+			if (ADDR2LAST(dest + count)) {
+				put_data = true;
+				isram_write(dest + count, data_out);
+			}
+		} else {
+			/* dest in L2 or L3 - so just dereference */
+			dest_byte[count] = byte;
+		}
+	}
+
+	/* make sure we dump the last byte if necessary */
+	if (dest_in_l1 && !put_data)
+		isram_write(dest + count, data_out);
+
+	return dest;
+}
+EXPORT_SYMBOL(isram_memcpy);
+
+#ifdef CONFIG_BFIN_ISRAM_SELF_TEST
+
+static int test_len = 0x20000;
+
+static __init void hex_dump(unsigned char *buf, int len)
+{
+	while (len--)
+		pr_cont("%02x", *buf++);
+}
+
+static __init int isram_read_test(char *sdram, void *l1inst)
+{
+	int i, ret = 0;
+	uint64_t data1, data2;
+
+	pr_info("INFO: running isram_read tests\n");
+
+	/* setup some different data to play with */
+	for (i = 0; i < test_len; ++i)
+		sdram[i] = i % 255;
+	dma_memcpy(l1inst, sdram, test_len);
+
+	/* make sure we can read the L1 inst */
+	for (i = 0; i < test_len; i += sizeof(uint64_t)) {
+		data1 = isram_read(l1inst + i);
+		memcpy(&data2, sdram + i, sizeof(data2));
+		if (data1 != data2) {
+			pr_err("FAIL: isram_read(%p) returned %#llx but wanted %#llx\n",
+				l1inst + i, data1, data2);
+			++ret;
+		}
+	}
+
+	return ret;
+}
+
+static __init int isram_write_test(char *sdram, void *l1inst)
+{
+	int i, ret = 0;
+	uint64_t data1, data2;
+
+	pr_info("INFO: running isram_write tests\n");
+
+	/* setup some different data to play with */
+	memset(sdram, 0, test_len * 2);
+	dma_memcpy(l1inst, sdram, test_len);
+	for (i = 0; i < test_len; ++i)
+		sdram[i] = i % 255;
+
+	/* make sure we can write the L1 inst */
+	for (i = 0; i < test_len; i += sizeof(uint64_t)) {
+		memcpy(&data1, sdram + i, sizeof(data1));
+		isram_write(l1inst + i, data1);
+		data2 = isram_read(l1inst + i);
+		if (data1 != data2) {
+			pr_err("FAIL: isram_write(%p, %#llx) != %#llx\n",
+				l1inst + i, data1, data2);
+			++ret;
+		}
+	}
+
+	dma_memcpy(sdram + test_len, l1inst, test_len);
+	if (memcmp(sdram, sdram + test_len, test_len)) {
+		pr_err("FAIL: isram_write() did not work properly\n");
+		++ret;
+	}
+
+	return ret;
+}
+
+static __init int
+_isram_memcpy_test(char pattern, void *sdram, void *l1inst, const char *smemcpy,
+                   void *(*fmemcpy)(void *, const void *, size_t))
+{
+	memset(sdram, pattern, test_len);
+	fmemcpy(l1inst, sdram, test_len);
+	fmemcpy(sdram + test_len, l1inst, test_len);
+	if (memcmp(sdram, sdram + test_len, test_len)) {
+		pr_err("FAIL: %s(%p <=> %p, %#x) failed (data is %#x)\n",
+			smemcpy, l1inst, sdram, test_len, pattern);
+		return 1;
+	}
+	return 0;
+}
+#define _isram_memcpy_test(a, b, c, d) _isram_memcpy_test(a, b, c, #d, d)
+
+static __init int isram_memcpy_test(char *sdram, void *l1inst)
+{
+	int i, j, thisret, ret = 0;
+
+	/* check broad isram_memcpy() */
+	pr_info("INFO: running broad isram_memcpy tests\n");
+	for (i = 0xf; i >= 0; --i)
+		ret += _isram_memcpy_test(i, sdram, l1inst, isram_memcpy);
+
+	/* check read of small, unaligned, and hardware 64bit limits */
+	pr_info("INFO: running isram_memcpy (read) tests\n");
+
+	/* setup some different data to play with */
+	for (i = 0; i < test_len; ++i)
+		sdram[i] = i % 255;
+	dma_memcpy(l1inst, sdram, test_len);
+
+	thisret = 0;
+	for (i = 0; i < test_len - 32; ++i) {
+		unsigned char cmp[32];
+		for (j = 1; j <= 32; ++j) {
+			memset(cmp, 0, sizeof(cmp));
+			isram_memcpy(cmp, l1inst + i, j);
+			if (memcmp(cmp, sdram + i, j)) {
+				pr_err("FAIL: %p:", l1inst + 1);
+				hex_dump(cmp, j);
+				pr_cont(" SDRAM:");
+				hex_dump(sdram + i, j);
+				pr_cont("\n");
+				if (++thisret > 20) {
+					pr_err("FAIL: skipping remaining series\n");
+					i = test_len;
+					break;
+				}
+			}
+		}
+	}
+	ret += thisret;
+
+	/* check write of small, unaligned, and hardware 64bit limits */
+	pr_info("INFO: running isram_memcpy (write) tests\n");
+
+	memset(sdram + test_len, 0, test_len);
+	dma_memcpy(l1inst, sdram + test_len, test_len);
+
+	thisret = 0;
+	for (i = 0; i < test_len - 32; ++i) {
+		unsigned char cmp[32];
+		for (j = 1; j <= 32; ++j) {
+			isram_memcpy(l1inst + i, sdram + i, j);
+			dma_memcpy(cmp, l1inst + i, j);
+			if (memcmp(cmp, sdram + i, j)) {
+				pr_err("FAIL: %p:", l1inst + i);
+				hex_dump(cmp, j);
+				pr_cont(" SDRAM:");
+				hex_dump(sdram + i, j);
+				pr_cont("\n");
+				if (++thisret > 20) {
+					pr_err("FAIL: skipping remaining series\n");
+					i = test_len;
+					break;
+				}
+			}
+		}
+	}
+	ret += thisret;
+
+	return ret;
+}
+
+static __init int isram_test_init(void)
+{
+	int ret;
+	char *sdram;
+	void *l1inst;
+
+	/* Try to test as much of L1SRAM as possible */
+	while (test_len) {
+		test_len >>= 1;
+		l1inst = l1_inst_sram_alloc(test_len);
+		if (l1inst)
+			break;
+	}
+	if (!l1inst) {
+		pr_warning("SKIP: could not allocate L1 inst\n");
+		return 0;
+	}
+	pr_info("INFO: testing %#x bytes (%p - %p)\n",
+	        test_len, l1inst, l1inst + test_len);
+
+	sdram = kmalloc(test_len * 2, GFP_KERNEL);
+	if (!sdram) {
+		sram_free(l1inst);
+		pr_warning("SKIP: could not allocate sdram\n");
+		return 0;
+	}
+
+	/* sanity check initial L1 inst state */
+	ret = 1;
+	pr_info("INFO: running initial dma_memcpy checks %p\n", sdram);
+	if (_isram_memcpy_test(0xa, sdram, l1inst, dma_memcpy))
+		goto abort;
+	if (_isram_memcpy_test(0x5, sdram, l1inst, dma_memcpy))
+		goto abort;
+
+	ret = 0;
+	ret += isram_read_test(sdram, l1inst);
+	ret += isram_write_test(sdram, l1inst);
+	ret += isram_memcpy_test(sdram, l1inst);
+
+ abort:
+	sram_free(l1inst);
+	kfree(sdram);
+
+	if (ret)
+		return -EIO;
+
+	pr_info("PASS: all tests worked !\n");
+	return 0;
+}
+late_initcall(isram_test_init);
+
+static __exit void isram_test_exit(void)
+{
+	/* stub to allow unloading */
+}
+module_exit(isram_test_exit);
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mm/maccess.c b/src/kernel/linux/v4.14/arch/blackfin/mm/maccess.c
new file mode 100644
index 0000000..e253211
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mm/maccess.c
@@ -0,0 +1,97 @@
+/*
+ * safe read and write memory routines callable while atomic
+ *
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/uaccess.h>
+#include <asm/dma.h>
+
+static int validate_memory_access_address(unsigned long addr, int size)
+{
+	if (size < 0 || addr == 0)
+		return -EFAULT;
+	return bfin_mem_access_type(addr, size);
+}
+
+long probe_kernel_read(void *dst, const void *src, size_t size)
+{
+	unsigned long lsrc = (unsigned long)src;
+	int mem_type;
+
+	mem_type = validate_memory_access_address(lsrc, size);
+	if (mem_type < 0)
+		return mem_type;
+
+	if (lsrc >= SYSMMR_BASE) {
+		if (size == 2 && lsrc % 2 == 0) {
+			u16 mmr = bfin_read16(src);
+			memcpy(dst, &mmr, sizeof(mmr));
+			return 0;
+		} else if (size == 4 && lsrc % 4 == 0) {
+			u32 mmr = bfin_read32(src);
+			memcpy(dst, &mmr, sizeof(mmr));
+			return 0;
+		}
+	} else {
+		switch (mem_type) {
+		case BFIN_MEM_ACCESS_CORE:
+		case BFIN_MEM_ACCESS_CORE_ONLY:
+			return __probe_kernel_read(dst, src, size);
+			/* XXX: should support IDMA here with SMP */
+		case BFIN_MEM_ACCESS_DMA:
+			if (dma_memcpy(dst, src, size))
+				return 0;
+			break;
+		case BFIN_MEM_ACCESS_ITEST:
+			if (isram_memcpy(dst, src, size))
+				return 0;
+			break;
+		}
+	}
+
+	return -EFAULT;
+}
+
+long probe_kernel_write(void *dst, const void *src, size_t size)
+{
+	unsigned long ldst = (unsigned long)dst;
+	int mem_type;
+
+	mem_type = validate_memory_access_address(ldst, size);
+	if (mem_type < 0)
+		return mem_type;
+
+	if (ldst >= SYSMMR_BASE) {
+		if (size == 2 && ldst % 2 == 0) {
+			u16 mmr;
+			memcpy(&mmr, src, sizeof(mmr));
+			bfin_write16(dst, mmr);
+			return 0;
+		} else if (size == 4 && ldst % 4 == 0) {
+			u32 mmr;
+			memcpy(&mmr, src, sizeof(mmr));
+			bfin_write32(dst, mmr);
+			return 0;
+		}
+	} else {
+		switch (mem_type) {
+		case BFIN_MEM_ACCESS_CORE:
+		case BFIN_MEM_ACCESS_CORE_ONLY:
+			return __probe_kernel_write(dst, src, size);
+			/* XXX: should support IDMA here with SMP */
+		case BFIN_MEM_ACCESS_DMA:
+			if (dma_memcpy(dst, src, size))
+				return 0;
+			break;
+		case BFIN_MEM_ACCESS_ITEST:
+			if (isram_memcpy(dst, src, size))
+				return 0;
+			break;
+		}
+	}
+
+	return -EFAULT;
+}
diff --git a/src/kernel/linux/v4.14/arch/blackfin/mm/sram-alloc.c b/src/kernel/linux/v4.14/arch/blackfin/mm/sram-alloc.c
new file mode 100644
index 0000000..d2a96c2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/mm/sram-alloc.c
@@ -0,0 +1,899 @@
+/*
+ * SRAM allocator for Blackfin on-chip memory
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/spinlock.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/mm_types.h>
+
+#include <asm/blackfin.h>
+#include <asm/mem_map.h>
+#include "blackfin_sram.h"
+
+/* the data structure for L1 scratchpad and DATA SRAM */
+struct sram_piece {
+	void *paddr;
+	int size;
+	pid_t pid;
+	struct sram_piece *next;
+};
+
+static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1sram_lock);
+static DEFINE_PER_CPU(struct sram_piece, free_l1_ssram_head);
+static DEFINE_PER_CPU(struct sram_piece, used_l1_ssram_head);
+
+#if L1_DATA_A_LENGTH != 0
+static DEFINE_PER_CPU(struct sram_piece, free_l1_data_A_sram_head);
+static DEFINE_PER_CPU(struct sram_piece, used_l1_data_A_sram_head);
+#endif
+
+#if L1_DATA_B_LENGTH != 0
+static DEFINE_PER_CPU(struct sram_piece, free_l1_data_B_sram_head);
+static DEFINE_PER_CPU(struct sram_piece, used_l1_data_B_sram_head);
+#endif
+
+#if L1_DATA_A_LENGTH || L1_DATA_B_LENGTH
+static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1_data_sram_lock);
+#endif
+
+#if L1_CODE_LENGTH != 0
+static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1_inst_sram_lock);
+static DEFINE_PER_CPU(struct sram_piece, free_l1_inst_sram_head);
+static DEFINE_PER_CPU(struct sram_piece, used_l1_inst_sram_head);
+#endif
+
+#if L2_LENGTH != 0
+static spinlock_t l2_sram_lock ____cacheline_aligned_in_smp;
+static struct sram_piece free_l2_sram_head, used_l2_sram_head;
+#endif
+
+static struct kmem_cache *sram_piece_cache;
+
+/* L1 Scratchpad SRAM initialization function */
+static void __init l1sram_init(void)
+{
+	unsigned int cpu;
+	unsigned long reserve;
+
+#ifdef CONFIG_SMP
+	reserve = 0;
+#else
+	reserve = sizeof(struct l1_scratch_task_info);
+#endif
+
+	for (cpu = 0; cpu < num_possible_cpus(); ++cpu) {
+		per_cpu(free_l1_ssram_head, cpu).next =
+			kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+		if (!per_cpu(free_l1_ssram_head, cpu).next) {
+			printk(KERN_INFO "Fail to initialize Scratchpad data SRAM.\n");
+			return;
+		}
+
+		per_cpu(free_l1_ssram_head, cpu).next->paddr = (void *)get_l1_scratch_start_cpu(cpu) + reserve;
+		per_cpu(free_l1_ssram_head, cpu).next->size = L1_SCRATCH_LENGTH - reserve;
+		per_cpu(free_l1_ssram_head, cpu).next->pid = 0;
+		per_cpu(free_l1_ssram_head, cpu).next->next = NULL;
+
+		per_cpu(used_l1_ssram_head, cpu).next = NULL;
+
+		/* mutex initialize */
+		spin_lock_init(&per_cpu(l1sram_lock, cpu));
+		printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
+			L1_SCRATCH_LENGTH >> 10);
+	}
+}
+
+static void __init l1_data_sram_init(void)
+{
+#if L1_DATA_A_LENGTH != 0 || L1_DATA_B_LENGTH != 0
+	unsigned int cpu;
+#endif
+#if L1_DATA_A_LENGTH != 0
+	for (cpu = 0; cpu < num_possible_cpus(); ++cpu) {
+		per_cpu(free_l1_data_A_sram_head, cpu).next =
+			kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+		if (!per_cpu(free_l1_data_A_sram_head, cpu).next) {
+			printk(KERN_INFO "Fail to initialize L1 Data A SRAM.\n");
+			return;
+		}
+
+		per_cpu(free_l1_data_A_sram_head, cpu).next->paddr =
+			(void *)get_l1_data_a_start_cpu(cpu) + (_ebss_l1 - _sdata_l1);
+		per_cpu(free_l1_data_A_sram_head, cpu).next->size =
+			L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
+		per_cpu(free_l1_data_A_sram_head, cpu).next->pid = 0;
+		per_cpu(free_l1_data_A_sram_head, cpu).next->next = NULL;
+
+		per_cpu(used_l1_data_A_sram_head, cpu).next = NULL;
+
+		printk(KERN_INFO "Blackfin L1 Data A SRAM: %d KB (%d KB free)\n",
+			L1_DATA_A_LENGTH >> 10,
+			per_cpu(free_l1_data_A_sram_head, cpu).next->size >> 10);
+	}
+#endif
+#if L1_DATA_B_LENGTH != 0
+	for (cpu = 0; cpu < num_possible_cpus(); ++cpu) {
+		per_cpu(free_l1_data_B_sram_head, cpu).next =
+			kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+		if (!per_cpu(free_l1_data_B_sram_head, cpu).next) {
+			printk(KERN_INFO "Fail to initialize L1 Data B SRAM.\n");
+			return;
+		}
+
+		per_cpu(free_l1_data_B_sram_head, cpu).next->paddr =
+			(void *)get_l1_data_b_start_cpu(cpu) + (_ebss_b_l1 - _sdata_b_l1);
+		per_cpu(free_l1_data_B_sram_head, cpu).next->size =
+			L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
+		per_cpu(free_l1_data_B_sram_head, cpu).next->pid = 0;
+		per_cpu(free_l1_data_B_sram_head, cpu).next->next = NULL;
+
+		per_cpu(used_l1_data_B_sram_head, cpu).next = NULL;
+
+		printk(KERN_INFO "Blackfin L1 Data B SRAM: %d KB (%d KB free)\n",
+			L1_DATA_B_LENGTH >> 10,
+			per_cpu(free_l1_data_B_sram_head, cpu).next->size >> 10);
+		/* mutex initialize */
+	}
+#endif
+
+#if L1_DATA_A_LENGTH != 0 || L1_DATA_B_LENGTH != 0
+	for (cpu = 0; cpu < num_possible_cpus(); ++cpu)
+		spin_lock_init(&per_cpu(l1_data_sram_lock, cpu));
+#endif
+}
+
+static void __init l1_inst_sram_init(void)
+{
+#if L1_CODE_LENGTH != 0
+	unsigned int cpu;
+	for (cpu = 0; cpu < num_possible_cpus(); ++cpu) {
+		per_cpu(free_l1_inst_sram_head, cpu).next =
+			kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+		if (!per_cpu(free_l1_inst_sram_head, cpu).next) {
+			printk(KERN_INFO "Failed to initialize L1 Instruction SRAM\n");
+			return;
+		}
+
+		per_cpu(free_l1_inst_sram_head, cpu).next->paddr =
+			(void *)get_l1_code_start_cpu(cpu) + (_etext_l1 - _stext_l1);
+		per_cpu(free_l1_inst_sram_head, cpu).next->size =
+			L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
+		per_cpu(free_l1_inst_sram_head, cpu).next->pid = 0;
+		per_cpu(free_l1_inst_sram_head, cpu).next->next = NULL;
+
+		per_cpu(used_l1_inst_sram_head, cpu).next = NULL;
+
+		printk(KERN_INFO "Blackfin L1 Instruction SRAM: %d KB (%d KB free)\n",
+			L1_CODE_LENGTH >> 10,
+			per_cpu(free_l1_inst_sram_head, cpu).next->size >> 10);
+
+		/* mutex initialize */
+		spin_lock_init(&per_cpu(l1_inst_sram_lock, cpu));
+	}
+#endif
+}
+
+#ifdef __ADSPBF60x__
+static irqreturn_t l2_ecc_err(int irq, void *dev_id)
+{
+	int status;
+
+	printk(KERN_ERR "L2 ecc error happened\n");
+	status = bfin_read32(L2CTL0_STAT);
+	if (status & 0x1)
+		printk(KERN_ERR "Core channel error type:0x%x, addr:0x%x\n",
+			bfin_read32(L2CTL0_ET0), bfin_read32(L2CTL0_EADDR0));
+	if (status & 0x2)
+		printk(KERN_ERR "System channel error type:0x%x, addr:0x%x\n",
+			bfin_read32(L2CTL0_ET1), bfin_read32(L2CTL0_EADDR1));
+
+	status = status >> 8;
+	if (status)
+		printk(KERN_ERR "L2 Bank%d error, addr:0x%x\n",
+			status, bfin_read32(L2CTL0_ERRADDR0 + status));
+
+	panic("L2 Ecc error");
+	return IRQ_HANDLED;
+}
+#endif
+
+static void __init l2_sram_init(void)
+{
+#if L2_LENGTH != 0
+
+#ifdef __ADSPBF60x__
+	int ret;
+
+	ret = request_irq(IRQ_L2CTL0_ECC_ERR, l2_ecc_err, 0, "l2-ecc-err",
+			NULL);
+	if (unlikely(ret < 0)) {
+		printk(KERN_INFO "Fail to request l2 ecc error interrupt");
+		return;
+	}
+#endif
+
+	free_l2_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l2_sram_head.next) {
+		printk(KERN_INFO "Fail to initialize L2 SRAM.\n");
+		return;
+	}
+
+	free_l2_sram_head.next->paddr =
+		(void *)L2_START + (_ebss_l2 - _stext_l2);
+	free_l2_sram_head.next->size =
+		L2_LENGTH - (_ebss_l2 - _stext_l2);
+	free_l2_sram_head.next->pid = 0;
+	free_l2_sram_head.next->next = NULL;
+
+	used_l2_sram_head.next = NULL;
+
+	printk(KERN_INFO "Blackfin L2 SRAM: %d KB (%d KB free)\n",
+		L2_LENGTH >> 10,
+		free_l2_sram_head.next->size >> 10);
+
+	/* mutex initialize */
+	spin_lock_init(&l2_sram_lock);
+#endif
+}
+
+static int __init bfin_sram_init(void)
+{
+	sram_piece_cache = kmem_cache_create("sram_piece_cache",
+				sizeof(struct sram_piece),
+				0, SLAB_PANIC, NULL);
+
+	l1sram_init();
+	l1_data_sram_init();
+	l1_inst_sram_init();
+	l2_sram_init();
+
+	return 0;
+}
+pure_initcall(bfin_sram_init);
+
+/* SRAM allocate function */
+static void *_sram_alloc(size_t size, struct sram_piece *pfree_head,
+		struct sram_piece *pused_head)
+{
+	struct sram_piece *pslot, *plast, *pavail;
+
+	if (size <= 0 || !pfree_head || !pused_head)
+		return NULL;
+
+	/* Align the size */
+	size = (size + 3) & ~3;
+
+	pslot = pfree_head->next;
+	plast = pfree_head;
+
+	/* search an available piece slot */
+	while (pslot != NULL && size > pslot->size) {
+		plast = pslot;
+		pslot = pslot->next;
+	}
+
+	if (!pslot)
+		return NULL;
+
+	if (pslot->size == size) {
+		plast->next = pslot->next;
+		pavail = pslot;
+	} else {
+		/* use atomic so our L1 allocator can be used atomically */
+		pavail = kmem_cache_alloc(sram_piece_cache, GFP_ATOMIC);
+
+		if (!pavail)
+			return NULL;
+
+		pavail->paddr = pslot->paddr;
+		pavail->size = size;
+		pslot->paddr += size;
+		pslot->size -= size;
+	}
+
+	pavail->pid = current->pid;
+
+	pslot = pused_head->next;
+	plast = pused_head;
+
+	/* insert new piece into used piece list !!! */
+	while (pslot != NULL && pavail->paddr < pslot->paddr) {
+		plast = pslot;
+		pslot = pslot->next;
+	}
+
+	pavail->next = pslot;
+	plast->next = pavail;
+
+	return pavail->paddr;
+}
+
+/* Allocate the largest available block.  */
+static void *_sram_alloc_max(struct sram_piece *pfree_head,
+				struct sram_piece *pused_head,
+				unsigned long *psize)
+{
+	struct sram_piece *pslot, *pmax;
+
+	if (!pfree_head || !pused_head)
+		return NULL;
+
+	pmax = pslot = pfree_head->next;
+
+	/* search an available piece slot */
+	while (pslot != NULL) {
+		if (pslot->size > pmax->size)
+			pmax = pslot;
+		pslot = pslot->next;
+	}
+
+	if (!pmax)
+		return NULL;
+
+	*psize = pmax->size;
+
+	return _sram_alloc(*psize, pfree_head, pused_head);
+}
+
+/* SRAM free function */
+static int _sram_free(const void *addr,
+			struct sram_piece *pfree_head,
+			struct sram_piece *pused_head)
+{
+	struct sram_piece *pslot, *plast, *pavail;
+
+	if (!pfree_head || !pused_head)
+		return -1;
+
+	/* search the relevant memory slot */
+	pslot = pused_head->next;
+	plast = pused_head;
+
+	/* search an available piece slot */
+	while (pslot != NULL && pslot->paddr != addr) {
+		plast = pslot;
+		pslot = pslot->next;
+	}
+
+	if (!pslot)
+		return -1;
+
+	plast->next = pslot->next;
+	pavail = pslot;
+	pavail->pid = 0;
+
+	/* insert free pieces back to the free list */
+	pslot = pfree_head->next;
+	plast = pfree_head;
+
+	while (pslot != NULL && addr > pslot->paddr) {
+		plast = pslot;
+		pslot = pslot->next;
+	}
+
+	if (plast != pfree_head && plast->paddr + plast->size == pavail->paddr) {
+		plast->size += pavail->size;
+		kmem_cache_free(sram_piece_cache, pavail);
+	} else {
+		pavail->next = plast->next;
+		plast->next = pavail;
+		plast = pavail;
+	}
+
+	if (pslot && plast->paddr + plast->size == pslot->paddr) {
+		plast->size += pslot->size;
+		plast->next = pslot->next;
+		kmem_cache_free(sram_piece_cache, pslot);
+	}
+
+	return 0;
+}
+
+int sram_free(const void *addr)
+{
+
+#if L1_CODE_LENGTH != 0
+	if (addr >= (void *)get_l1_code_start()
+		 && addr < (void *)(get_l1_code_start() + L1_CODE_LENGTH))
+		return l1_inst_sram_free(addr);
+	else
+#endif
+#if L1_DATA_A_LENGTH != 0
+	if (addr >= (void *)get_l1_data_a_start()
+		 && addr < (void *)(get_l1_data_a_start() + L1_DATA_A_LENGTH))
+		return l1_data_A_sram_free(addr);
+	else
+#endif
+#if L1_DATA_B_LENGTH != 0
+	if (addr >= (void *)get_l1_data_b_start()
+		 && addr < (void *)(get_l1_data_b_start() + L1_DATA_B_LENGTH))
+		return l1_data_B_sram_free(addr);
+	else
+#endif
+#if L2_LENGTH != 0
+	if (addr >= (void *)L2_START
+		 && addr < (void *)(L2_START + L2_LENGTH))
+		return l2_sram_free(addr);
+	else
+#endif
+		return -1;
+}
+EXPORT_SYMBOL(sram_free);
+
+void *l1_data_A_sram_alloc(size_t size)
+{
+#if L1_DATA_A_LENGTH != 0
+	unsigned long flags;
+	void *addr;
+	unsigned int cpu;
+
+	cpu = smp_processor_id();
+	/* add mutex operation */
+	spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags);
+
+	addr = _sram_alloc(size, &per_cpu(free_l1_data_A_sram_head, cpu),
+			&per_cpu(used_l1_data_A_sram_head, cpu));
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags);
+
+	pr_debug("Allocated address in l1_data_A_sram_alloc is 0x%lx+0x%lx\n",
+		 (long unsigned int)addr, size);
+
+	return addr;
+#else
+	return NULL;
+#endif
+}
+EXPORT_SYMBOL(l1_data_A_sram_alloc);
+
+int l1_data_A_sram_free(const void *addr)
+{
+#if L1_DATA_A_LENGTH != 0
+	unsigned long flags;
+	int ret;
+	unsigned int cpu;
+
+	cpu = smp_processor_id();
+	/* add mutex operation */
+	spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags);
+
+	ret = _sram_free(addr, &per_cpu(free_l1_data_A_sram_head, cpu),
+			&per_cpu(used_l1_data_A_sram_head, cpu));
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags);
+
+	return ret;
+#else
+	return -1;
+#endif
+}
+EXPORT_SYMBOL(l1_data_A_sram_free);
+
+void *l1_data_B_sram_alloc(size_t size)
+{
+#if L1_DATA_B_LENGTH != 0
+	unsigned long flags;
+	void *addr;
+	unsigned int cpu;
+
+	cpu = smp_processor_id();
+	/* add mutex operation */
+	spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags);
+
+	addr = _sram_alloc(size, &per_cpu(free_l1_data_B_sram_head, cpu),
+			&per_cpu(used_l1_data_B_sram_head, cpu));
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags);
+
+	pr_debug("Allocated address in l1_data_B_sram_alloc is 0x%lx+0x%lx\n",
+		 (long unsigned int)addr, size);
+
+	return addr;
+#else
+	return NULL;
+#endif
+}
+EXPORT_SYMBOL(l1_data_B_sram_alloc);
+
+int l1_data_B_sram_free(const void *addr)
+{
+#if L1_DATA_B_LENGTH != 0
+	unsigned long flags;
+	int ret;
+	unsigned int cpu;
+
+	cpu = smp_processor_id();
+	/* add mutex operation */
+	spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags);
+
+	ret = _sram_free(addr, &per_cpu(free_l1_data_B_sram_head, cpu),
+			&per_cpu(used_l1_data_B_sram_head, cpu));
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags);
+
+	return ret;
+#else
+	return -1;
+#endif
+}
+EXPORT_SYMBOL(l1_data_B_sram_free);
+
+void *l1_data_sram_alloc(size_t size)
+{
+	void *addr = l1_data_A_sram_alloc(size);
+
+	if (!addr)
+		addr = l1_data_B_sram_alloc(size);
+
+	return addr;
+}
+EXPORT_SYMBOL(l1_data_sram_alloc);
+
+void *l1_data_sram_zalloc(size_t size)
+{
+	void *addr = l1_data_sram_alloc(size);
+
+	if (addr)
+		memset(addr, 0x00, size);
+
+	return addr;
+}
+EXPORT_SYMBOL(l1_data_sram_zalloc);
+
+int l1_data_sram_free(const void *addr)
+{
+	int ret;
+	ret = l1_data_A_sram_free(addr);
+	if (ret == -1)
+		ret = l1_data_B_sram_free(addr);
+	return ret;
+}
+EXPORT_SYMBOL(l1_data_sram_free);
+
+void *l1_inst_sram_alloc(size_t size)
+{
+#if L1_CODE_LENGTH != 0
+	unsigned long flags;
+	void *addr;
+	unsigned int cpu;
+
+	cpu = smp_processor_id();
+	/* add mutex operation */
+	spin_lock_irqsave(&per_cpu(l1_inst_sram_lock, cpu), flags);
+
+	addr = _sram_alloc(size, &per_cpu(free_l1_inst_sram_head, cpu),
+			&per_cpu(used_l1_inst_sram_head, cpu));
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&per_cpu(l1_inst_sram_lock, cpu), flags);
+
+	pr_debug("Allocated address in l1_inst_sram_alloc is 0x%lx+0x%lx\n",
+		 (long unsigned int)addr, size);
+
+	return addr;
+#else
+	return NULL;
+#endif
+}
+EXPORT_SYMBOL(l1_inst_sram_alloc);
+
+int l1_inst_sram_free(const void *addr)
+{
+#if L1_CODE_LENGTH != 0
+	unsigned long flags;
+	int ret;
+	unsigned int cpu;
+
+	cpu = smp_processor_id();
+	/* add mutex operation */
+	spin_lock_irqsave(&per_cpu(l1_inst_sram_lock, cpu), flags);
+
+	ret = _sram_free(addr, &per_cpu(free_l1_inst_sram_head, cpu),
+			&per_cpu(used_l1_inst_sram_head, cpu));
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&per_cpu(l1_inst_sram_lock, cpu), flags);
+
+	return ret;
+#else
+	return -1;
+#endif
+}
+EXPORT_SYMBOL(l1_inst_sram_free);
+
+/* L1 Scratchpad memory allocate function */
+void *l1sram_alloc(size_t size)
+{
+	unsigned long flags;
+	void *addr;
+	unsigned int cpu;
+
+	cpu = smp_processor_id();
+	/* add mutex operation */
+	spin_lock_irqsave(&per_cpu(l1sram_lock, cpu), flags);
+
+	addr = _sram_alloc(size, &per_cpu(free_l1_ssram_head, cpu),
+			&per_cpu(used_l1_ssram_head, cpu));
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&per_cpu(l1sram_lock, cpu), flags);
+
+	return addr;
+}
+
+/* L1 Scratchpad memory allocate function */
+void *l1sram_alloc_max(size_t *psize)
+{
+	unsigned long flags;
+	void *addr;
+	unsigned int cpu;
+
+	cpu = smp_processor_id();
+	/* add mutex operation */
+	spin_lock_irqsave(&per_cpu(l1sram_lock, cpu), flags);
+
+	addr = _sram_alloc_max(&per_cpu(free_l1_ssram_head, cpu),
+			&per_cpu(used_l1_ssram_head, cpu), psize);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&per_cpu(l1sram_lock, cpu), flags);
+
+	return addr;
+}
+
+/* L1 Scratchpad memory free function */
+int l1sram_free(const void *addr)
+{
+	unsigned long flags;
+	int ret;
+	unsigned int cpu;
+
+	cpu = smp_processor_id();
+	/* add mutex operation */
+	spin_lock_irqsave(&per_cpu(l1sram_lock, cpu), flags);
+
+	ret = _sram_free(addr, &per_cpu(free_l1_ssram_head, cpu),
+			&per_cpu(used_l1_ssram_head, cpu));
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&per_cpu(l1sram_lock, cpu), flags);
+
+	return ret;
+}
+
+void *l2_sram_alloc(size_t size)
+{
+#if L2_LENGTH != 0
+	unsigned long flags;
+	void *addr;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l2_sram_lock, flags);
+
+	addr = _sram_alloc(size, &free_l2_sram_head,
+			&used_l2_sram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l2_sram_lock, flags);
+
+	pr_debug("Allocated address in l2_sram_alloc is 0x%lx+0x%lx\n",
+		 (long unsigned int)addr, size);
+
+	return addr;
+#else
+	return NULL;
+#endif
+}
+EXPORT_SYMBOL(l2_sram_alloc);
+
+void *l2_sram_zalloc(size_t size)
+{
+	void *addr = l2_sram_alloc(size);
+
+	if (addr)
+		memset(addr, 0x00, size);
+
+	return addr;
+}
+EXPORT_SYMBOL(l2_sram_zalloc);
+
+int l2_sram_free(const void *addr)
+{
+#if L2_LENGTH != 0
+	unsigned long flags;
+	int ret;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l2_sram_lock, flags);
+
+	ret = _sram_free(addr, &free_l2_sram_head,
+			&used_l2_sram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l2_sram_lock, flags);
+
+	return ret;
+#else
+	return -1;
+#endif
+}
+EXPORT_SYMBOL(l2_sram_free);
+
+int sram_free_with_lsl(const void *addr)
+{
+	struct sram_list_struct *lsl, **tmp;
+	struct mm_struct *mm = current->mm;
+	int ret = -1;
+
+	for (tmp = &mm->context.sram_list; *tmp; tmp = &(*tmp)->next)
+		if ((*tmp)->addr == addr) {
+			lsl = *tmp;
+			ret = sram_free(addr);
+			*tmp = lsl->next;
+			kfree(lsl);
+			break;
+		}
+
+	return ret;
+}
+EXPORT_SYMBOL(sram_free_with_lsl);
+
+/* Allocate memory and keep in L1 SRAM List (lsl) so that the resources are
+ * tracked.  These are designed for userspace so that when a process exits,
+ * we can safely reap their resources.
+ */
+void *sram_alloc_with_lsl(size_t size, unsigned long flags)
+{
+	void *addr = NULL;
+	struct sram_list_struct *lsl = NULL;
+	struct mm_struct *mm = current->mm;
+
+	lsl = kzalloc(sizeof(struct sram_list_struct), GFP_KERNEL);
+	if (!lsl)
+		return NULL;
+
+	if (flags & L1_INST_SRAM)
+		addr = l1_inst_sram_alloc(size);
+
+	if (addr == NULL && (flags & L1_DATA_A_SRAM))
+		addr = l1_data_A_sram_alloc(size);
+
+	if (addr == NULL && (flags & L1_DATA_B_SRAM))
+		addr = l1_data_B_sram_alloc(size);
+
+	if (addr == NULL && (flags & L2_SRAM))
+		addr = l2_sram_alloc(size);
+
+	if (addr == NULL) {
+		kfree(lsl);
+		return NULL;
+	}
+	lsl->addr = addr;
+	lsl->length = size;
+	lsl->next = mm->context.sram_list;
+	mm->context.sram_list = lsl;
+	return addr;
+}
+EXPORT_SYMBOL(sram_alloc_with_lsl);
+
+#ifdef CONFIG_PROC_FS
+/* Once we get a real allocator, we'll throw all of this away.
+ * Until then, we need some sort of visibility into the L1 alloc.
+ */
+/* Need to keep line of output the same.  Currently, that is 44 bytes
+ * (including newline).
+ */
+static int _sram_proc_show(struct seq_file *m, const char *desc,
+		struct sram_piece *pfree_head,
+		struct sram_piece *pused_head)
+{
+	struct sram_piece *pslot;
+
+	if (!pfree_head || !pused_head)
+		return -1;
+
+	seq_printf(m, "--- SRAM %-14s Size   PID State     \n", desc);
+
+	/* search the relevant memory slot */
+	pslot = pused_head->next;
+
+	while (pslot != NULL) {
+		seq_printf(m, "%p-%p %10i %5i %-10s\n",
+			pslot->paddr, pslot->paddr + pslot->size,
+			pslot->size, pslot->pid, "ALLOCATED");
+
+		pslot = pslot->next;
+	}
+
+	pslot = pfree_head->next;
+
+	while (pslot != NULL) {
+		seq_printf(m, "%p-%p %10i %5i %-10s\n",
+			pslot->paddr, pslot->paddr + pslot->size,
+			pslot->size, pslot->pid, "FREE");
+
+		pslot = pslot->next;
+	}
+
+	return 0;
+}
+static int sram_proc_show(struct seq_file *m, void *v)
+{
+	unsigned int cpu;
+
+	for (cpu = 0; cpu < num_possible_cpus(); ++cpu) {
+		if (_sram_proc_show(m, "Scratchpad",
+			&per_cpu(free_l1_ssram_head, cpu), &per_cpu(used_l1_ssram_head, cpu)))
+			goto not_done;
+#if L1_DATA_A_LENGTH != 0
+		if (_sram_proc_show(m, "L1 Data A",
+			&per_cpu(free_l1_data_A_sram_head, cpu),
+			&per_cpu(used_l1_data_A_sram_head, cpu)))
+			goto not_done;
+#endif
+#if L1_DATA_B_LENGTH != 0
+		if (_sram_proc_show(m, "L1 Data B",
+			&per_cpu(free_l1_data_B_sram_head, cpu),
+			&per_cpu(used_l1_data_B_sram_head, cpu)))
+			goto not_done;
+#endif
+#if L1_CODE_LENGTH != 0
+		if (_sram_proc_show(m, "L1 Instruction",
+			&per_cpu(free_l1_inst_sram_head, cpu),
+			&per_cpu(used_l1_inst_sram_head, cpu)))
+			goto not_done;
+#endif
+	}
+#if L2_LENGTH != 0
+	if (_sram_proc_show(m, "L2", &free_l2_sram_head, &used_l2_sram_head))
+		goto not_done;
+#endif
+ not_done:
+	return 0;
+}
+
+static int sram_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, sram_proc_show, NULL);
+}
+
+static const struct file_operations sram_proc_ops = {
+	.open		= sram_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init sram_proc_init(void)
+{
+	struct proc_dir_entry *ptr;
+
+	ptr = proc_create("sram", S_IRUGO, NULL, &sram_proc_ops);
+	if (!ptr) {
+		printk(KERN_WARNING "unable to create /proc/sram\n");
+		return -1;
+	}
+	return 0;
+}
+late_initcall(sram_proc_init);
+#endif
diff --git a/src/kernel/linux/v4.14/arch/blackfin/oprofile/Makefile b/src/kernel/linux/v4.14/arch/blackfin/oprofile/Makefile
new file mode 100644
index 0000000..e89e1c9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/oprofile/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# arch/blackfin/oprofile/Makefile
+#
+
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
+		oprof.o cpu_buffer.o buffer_sync.o \
+		event_buffer.o oprofile_files.o \
+		oprofilefs.o oprofile_stats.o \
+		timer_int.o )
+
+oprofile-y := $(DRIVER_OBJS) bfin_oprofile.o
diff --git a/src/kernel/linux/v4.14/arch/blackfin/oprofile/bfin_oprofile.c b/src/kernel/linux/v4.14/arch/blackfin/oprofile/bfin_oprofile.c
new file mode 100644
index 0000000..c3b9713
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/blackfin/oprofile/bfin_oprofile.c
@@ -0,0 +1,18 @@
+/*
+ * bfin_oprofile.c - Blackfin oprofile code
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+	return -1;
+}
+
+void oprofile_arch_exit(void)
+{
+}