[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/arch/m68k/Kconfig.devices b/src/kernel/linux/v4.14/arch/m68k/Kconfig.devices
new file mode 100644
index 0000000..3e9b0b8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/m68k/Kconfig.devices
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0
+if MMU
+
+config ARCH_MAY_HAVE_PC_FDC
+ bool
+ depends on BROKEN && (Q40 || SUN3X)
+ default y
+
+menu "Platform devices"
+
+config HEARTBEAT
+ bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
+ default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
+ help
+ Use the power-on LED on your machine as a load meter. The exact
+ behavior is platform-dependent, but normally the flash frequency is
+ a hyperbolic function of the 5-minute load average.
+
+# We have a dedicated heartbeat LED. :-)
+config PROC_HARDWARE
+ bool "/proc/hardware support"
+ help
+ Say Y here to support the /proc/hardware file, which gives you
+ access to information about the machine you're running on,
+ including the model, CPU, MMU, clock speed, BogoMIPS rating,
+ and memory size.
+
+config NATFEAT
+ bool "ARAnyM emulator support"
+ depends on ATARI
+ help
+ This option enables support for ARAnyM native features, such as
+ access to a disk image as /dev/hda.
+
+config NFBLOCK
+ tristate "NatFeat block device support"
+ depends on BLOCK && NATFEAT
+ help
+ Say Y to include support for the ARAnyM NatFeat block device
+ which allows direct access to the hard drives without using
+ the hardware emulation.
+
+config NFCON
+ tristate "NatFeat console driver"
+ depends on TTY && NATFEAT
+ help
+ Say Y to include support for the ARAnyM NatFeat console driver
+ which allows the console output to be redirected to the stderr
+ output of ARAnyM.
+
+config NFETH
+ tristate "NatFeat Ethernet support"
+ depends on ETHERNET && NATFEAT
+ help
+ Say Y to include support for the ARAnyM NatFeat network device
+ which will emulate a regular ethernet device while presenting an
+ ethertap device to the host system.
+
+config ATARI_ETHERNAT
+ bool "Atari EtherNAT Ethernet support"
+ depends on ATARI
+ ---help---
+ Say Y to include support for the EtherNAT network adapter for the
+ CT/60 extension port.
+
+ To compile the actual ethernet driver, choose Y or M for the SMC91X
+ option in the network device section; the module will be called smc91x.
+
+config ATARI_ETHERNEC
+ bool "Atari EtherNEC Ethernet support"
+ depends on ATARI_ROM_ISA
+ ---help---
+ Say Y to include support for the EtherNEC network adapter for the
+ ROM port. The driver works by polling instead of interrupts, so it
+ is quite slow.
+
+ This driver also supports the ethernet part of the NetUSBee ROM
+ port combined Ethernet/USB adapter.
+
+ To compile the actual ethernet driver, choose Y or M in for the NE2000
+ option in the network device section; the module will be called ne.
+
+endmenu
+
+menu "Character devices"
+
+config ATARI_DSP56K
+ tristate "Atari DSP56k support"
+ depends on ATARI
+ help
+ If you want to be able to use the DSP56001 in Falcons, say Y. This
+ driver is still experimental, and if you don't know what it is, or
+ if you don't have this processor, just say N.
+
+ To compile this driver as a module, choose M here.
+
+config AMIGA_BUILTIN_SERIAL
+ tristate "Amiga builtin serial support"
+ depends on AMIGA && TTY
+ help
+ If you want to use your Amiga's built-in serial port in Linux,
+ answer Y.
+
+ To compile this driver as a module, choose M here.
+
+config HPDCA
+ tristate "HP DCA serial support"
+ depends on DIO && SERIAL_8250
+ help
+ If you want to use the internal "DCA" serial ports on an HP300
+ machine, say Y here.
+
+config HPAPCI
+ tristate "HP APCI serial support"
+ depends on HP300 && SERIAL_8250
+ help
+ If you want to use the internal "APCI" serial ports on an HP400
+ machine, say Y here.
+
+config SERIAL_CONSOLE
+ bool "Support for serial port console"
+ depends on AMIGA_BUILTIN_SERIAL=y
+ ---help---
+ If you say Y here, it will be possible to use a serial port as the
+ system console (the system console is the device which receives all
+ kernel messages and warnings and which allows logins in single user
+ mode). This could be useful if some terminal or printer is connected
+ to that serial port.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyS1". (Try "man bootparam" or see the documentation of
+ your boot loader about how to pass options to the kernel at boot
+ time.)
+
+ If you don't have a graphical console and you say Y here, the
+ kernel will automatically use the first serial line, /dev/ttyS0, as
+ system console.
+
+ If unsure, say N.
+
+endmenu
+
+endif