[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/arch/mips/pci/pci-lantiq.c b/src/kernel/linux/v4.14/arch/mips/pci/pci-lantiq.c
new file mode 100644
index 0000000..f18f887
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/mips/pci/pci-lantiq.c
@@ -0,0 +1,253 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/clk.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+
+#include <asm/addrspace.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_irq.h>
+
+#include "pci-lantiq.h"
+
+#define PCI_CR_FCI_ADDR_MAP0 0x00C0
+#define PCI_CR_FCI_ADDR_MAP1 0x00C4
+#define PCI_CR_FCI_ADDR_MAP2 0x00C8
+#define PCI_CR_FCI_ADDR_MAP3 0x00CC
+#define PCI_CR_FCI_ADDR_MAP4 0x00D0
+#define PCI_CR_FCI_ADDR_MAP5 0x00D4
+#define PCI_CR_FCI_ADDR_MAP6 0x00D8
+#define PCI_CR_FCI_ADDR_MAP7 0x00DC
+#define PCI_CR_CLK_CTRL 0x0000
+#define PCI_CR_PCI_MOD 0x0030
+#define PCI_CR_PC_ARB 0x0080
+#define PCI_CR_FCI_ADDR_MAP11hg 0x00E4
+#define PCI_CR_BAR11MASK 0x0044
+#define PCI_CR_BAR12MASK 0x0048
+#define PCI_CR_BAR13MASK 0x004C
+#define PCI_CS_BASE_ADDR1 0x0010
+#define PCI_CR_PCI_ADDR_MAP11 0x0064
+#define PCI_CR_FCI_BURST_LENGTH 0x00E8
+#define PCI_CR_PCI_EOI 0x002C
+#define PCI_CS_STS_CMD 0x0004
+
+#define PCI_MASTER0_REQ_MASK_2BITS 8
+#define PCI_MASTER1_REQ_MASK_2BITS 10
+#define PCI_MASTER2_REQ_MASK_2BITS 12
+#define INTERNAL_ARB_ENABLE_BIT 0
+
+#define LTQ_CGU_IFCCR 0x0018
+#define LTQ_CGU_PCICR 0x0034
+
+#define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y))
+#define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x))
+
+#define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y))
+#define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x))
+
+__iomem void *ltq_pci_mapped_cfg;
+static __iomem void *ltq_pci_membase;
+
+static int reset_gpio;
+static struct clk *clk_pci, *clk_external;
+static struct resource pci_io_resource;
+static struct resource pci_mem_resource;
+static struct pci_ops pci_ops = {
+ .read = ltq_pci_read_config_dword,
+ .write = ltq_pci_write_config_dword
+};
+
+static struct pci_controller pci_controller = {
+ .pci_ops = &pci_ops,
+ .mem_resource = &pci_mem_resource,
+ .mem_offset = 0x00000000UL,
+ .io_resource = &pci_io_resource,
+ .io_offset = 0x00000000UL,
+};
+
+static inline u32 ltq_calc_bar11mask(void)
+{
+ u32 mem, bar11mask;
+
+ /* BAR11MASK value depends on available memory on system. */
+ mem = get_num_physpages() * PAGE_SIZE;
+ bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8;
+
+ return bar11mask;
+}
+
+static int ltq_pci_startup(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ const __be32 *req_mask, *bus_clk;
+ u32 temp_buffer;
+
+ /* get our clocks */
+ clk_pci = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk_pci)) {
+ dev_err(&pdev->dev, "failed to get pci clock\n");
+ return PTR_ERR(clk_pci);
+ }
+
+ clk_external = clk_get(&pdev->dev, "external");
+ if (IS_ERR(clk_external)) {
+ clk_put(clk_pci);
+ dev_err(&pdev->dev, "failed to get external pci clock\n");
+ return PTR_ERR(clk_external);
+ }
+
+ /* read the bus speed that we want */
+ bus_clk = of_get_property(node, "lantiq,bus-clock", NULL);
+ if (bus_clk)
+ clk_set_rate(clk_pci, *bus_clk);
+
+ /* and enable the clocks */
+ clk_enable(clk_pci);
+ if (of_find_property(node, "lantiq,external-clock", NULL))
+ clk_enable(clk_external);
+ else
+ clk_disable(clk_external);
+
+ /* setup reset gpio used by pci */
+ reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
+ if (gpio_is_valid(reset_gpio)) {
+ int ret = devm_gpio_request(&pdev->dev,
+ reset_gpio, "pci-reset");
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to request gpio %d\n", reset_gpio);
+ return ret;
+ }
+ gpio_direction_output(reset_gpio, 1);
+ }
+
+ /* enable auto-switching between PCI and EBU */
+ ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
+
+ /* busy, i.e. configuration is not done, PCI access has to be retried */
+ ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
+ wmb();
+ /* BUS Master/IO/MEM access */
+ ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
+
+ /* enable external 2 PCI masters */
+ temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB);
+ /* setup the request mask */
+ req_mask = of_get_property(node, "req-mask", NULL);
+ if (req_mask)
+ temp_buffer &= ~((*req_mask & 0xf) << 16);
+ else
+ temp_buffer &= ~0xf0000;
+ /* enable internal arbiter */
+ temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
+ /* enable internal PCI master reqest */
+ temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
+
+ /* enable EBU request */
+ temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
+
+ /* enable all external masters request */
+ temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
+ ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB);
+ wmb();
+
+ /* setup BAR memory regions */
+ ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
+ ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
+ ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
+ ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
+ ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
+ ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
+ ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
+ ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
+ ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
+ ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK);
+ ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11);
+ ltq_pci_w32(0, PCI_CS_BASE_ADDR1);
+ /* both TX and RX endian swap are enabled */
+ ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
+ wmb();
+ ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000,
+ PCI_CR_BAR12MASK);
+ ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000,
+ PCI_CR_BAR13MASK);
+ /*use 8 dw burst length */
+ ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
+ ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
+ wmb();
+
+ /* setup irq line */
+ ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON);
+ ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
+
+ /* toggle reset pin */
+ if (gpio_is_valid(reset_gpio)) {
+ __gpio_set_value(reset_gpio, 0);
+ wmb();
+ mdelay(1);
+ __gpio_set_value(reset_gpio, 1);
+ }
+ return 0;
+}
+
+static int ltq_pci_probe(struct platform_device *pdev)
+{
+ struct resource *res_cfg, *res_bridge;
+
+ pci_clear_flags(PCI_PROBE_ONLY);
+
+ res_bridge = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ ltq_pci_membase = devm_ioremap_resource(&pdev->dev, res_bridge);
+ if (IS_ERR(ltq_pci_membase))
+ return PTR_ERR(ltq_pci_membase);
+
+ res_cfg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ltq_pci_mapped_cfg = devm_ioremap_resource(&pdev->dev, res_cfg);
+ if (IS_ERR(ltq_pci_mapped_cfg))
+ return PTR_ERR(ltq_pci_mapped_cfg);
+
+ ltq_pci_startup(pdev);
+
+ pci_load_of_ranges(&pci_controller, pdev->dev.of_node);
+ register_pci_controller(&pci_controller);
+ return 0;
+}
+
+static const struct of_device_id ltq_pci_match[] = {
+ { .compatible = "lantiq,pci-xway" },
+ {},
+};
+
+static struct platform_driver ltq_pci_driver = {
+ .probe = ltq_pci_probe,
+ .driver = {
+ .name = "pci-xway",
+ .of_match_table = ltq_pci_match,
+ },
+};
+
+int __init pcibios_init(void)
+{
+ int ret = platform_driver_register(<q_pci_driver);
+ if (ret)
+ pr_info("pci-xway: Error registering platform driver!");
+ return ret;
+}
+
+arch_initcall(pcibios_init);