[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/Makefile b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/Makefile
new file mode 100644
index 0000000..cbc5aba
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/Makefile
@@ -0,0 +1,8 @@
+###############################################################################
+#
+# Makefile for the ASB2305 board
+#
+###############################################################################
+obj-y := unit-init.o leds.o
+
+obj-$(CONFIG_PCI) += pci.o pci-asb2305.o pci-irq.o
diff --git a/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/include/unit/clock.h b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/include/unit/clock.h
new file mode 100644
index 0000000..29e3425
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/include/unit/clock.h
@@ -0,0 +1,24 @@
+/* ASB2305-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#define MN10300_IOCLK 33333333UL
+/* #define MN10300_IOBCLK 66666666UL */
+
+#endif /* !__ASSEMBLY__ */
+
+#define MN10300_WDCLK MN10300_IOCLK
+
+#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/include/unit/leds.h b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/include/unit/leds.h
new file mode 100644
index 0000000..bc471f6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/include/unit/leds.h
@@ -0,0 +1,51 @@
+/* ASB2305-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2305_7SEGLEDS __SYSREG(0xA6F90000, u32)
+
+/* perform a hard reset by driving PIO06 low */
+#define mn10300_unit_hard_reset() \
+do { \
+ P0OUT &= 0xbf; \
+ P0MD = (P0MD & P0MD_6) | P0MD_6_OUT; \
+} while (0)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+/* indicate double-fault by displaying "db-f" on the LEDs */
+#define mn10300_set_dbfleds \
+ mov 0x43077f1d,d0 ; \
+ mov d0,(ASB2305_7SEGLEDS)
+
+/* flip the 7-segment LEDs between "Gdb-" and "----" */
+#define mn10300_set_gdbleds(ONOFF) \
+do { \
+ ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \
+} while (0)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code);
+extern void peripheral_leds_led_chase(void);
+extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_rtc(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
diff --git a/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/include/unit/serial.h b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/include/unit/serial.h
new file mode 100644
index 0000000..88c0821
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/include/unit/serial.h
@@ -0,0 +1,125 @@
+/* ASB2305-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu-regs.h>
+#include <proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000
+#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8)
+
+#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */
+
+/*
+ * The ASB2305 has an 18.432 MHz clock the UART
+ */
+#define BASE_BAUD (18432000 / 16)
+
+/*
+ * dispose of the /dev/ttyS0 serial port
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS \
+ { \
+ .baud_base = BASE_BAUD, \
+ .irq = SERIAL_IRQ, \
+ .flags = STD_COM_FLAGS, \
+ .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM, \
+ },
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* stolen by gdb-stub */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8)
+#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
+#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#error The ASB2305 doesnt have a /dev/ttyS1
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
+#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+
+#define LSR_WAIT_FOR(STATE) \
+do { \
+ while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE) \
+do { \
+ while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \
+} while (0)
+#define FLOWCTL_CLEAR(LINE) \
+do { \
+ TTYS0_MCR &= ~UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_SET(LINE) \
+do { \
+ TTYS0_MCR |= UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+ char ch;
+
+ FLOWCTL_SET(DTR);
+
+ for (; n > 0; n--) {
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_WAIT_FOR(CTS);
+
+ ch = *p++;
+ if (ch == 0x0a) {
+ TTYS0_TX = 0x0d;
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_WAIT_FOR(CTS);
+ }
+ TTYS0_TX = ch;
+ }
+
+ FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/include/unit/timex.h b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/include/unit/timex.h
new file mode 100644
index 0000000..4cefc22
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/include/unit/timex.h
@@ -0,0 +1,146 @@
+/* ASB2305-specific timer specifications
+ *
+ * Copyright (C) 2007, 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#include <asm/timer-regs.h>
+#include <unit/clock.h>
+#include <asm/param.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define TMJCBR_MAX 0xffff
+#define TMJCIRQ TM1IRQ
+#define TMJCICR TM1ICR
+
+#ifndef __ASSEMBLY__
+
+#define MN10300_SRC_IOCLK MN10300_IOCLK
+
+#ifndef HZ
+# error HZ undeclared.
+#endif /* !HZ */
+/* use as little prescaling as possible to avoid losing accuracy */
+#if (MN10300_SRC_IOCLK + HZ / 2) / HZ - 1 <= TMJCBR_MAX
+# define IOCLK_PRESCALE 1
+# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK
+# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK
+#elif (MN10300_SRC_IOCLK / 8 + HZ / 2) / HZ - 1 <= TMJCBR_MAX
+# define IOCLK_PRESCALE 8
+# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_8
+# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_8
+#elif (MN10300_SRC_IOCLK / 32 + HZ / 2) / HZ - 1 <= TMJCBR_MAX
+# define IOCLK_PRESCALE 32
+# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_32
+# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_32
+#else
+# error You lose.
+#endif
+
+#define MN10300_JCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE)
+#define MN10300_TSCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE)
+
+#define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ)
+#define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ)
+
+static inline void stop_jiffies_counter(void)
+{
+ u16 tmp;
+ TM01MD = JC_TIMER_CLKSRC | TM1MD_SRC_TM0CASCADE << 8;
+ tmp = TM01MD;
+}
+
+static inline void reload_jiffies_counter(u32 cnt)
+{
+ u32 tmp;
+
+ TM01BR = cnt;
+ tmp = TM01BR;
+
+ TM01MD = JC_TIMER_CLKSRC | \
+ TM1MD_SRC_TM0CASCADE << 8 | \
+ TM0MD_INIT_COUNTER | \
+ TM1MD_INIT_COUNTER << 8;
+
+
+ TM01MD = JC_TIMER_CLKSRC | \
+ TM1MD_SRC_TM0CASCADE << 8 | \
+ TM0MD_COUNT_ENABLE | \
+ TM1MD_COUNT_ENABLE << 8;
+
+ tmp = TM01MD;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define TMTSCBR_MAX 0xffffffff
+#define TMTSCBC TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+ u32 t32;
+
+ /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+ * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+ */
+ TM45BR = TMTSCBR_MAX;
+ t32 = TM45BR;
+
+ TM4MD = TSC_TIMER_CLKSRC;
+ TM4MD |= TM4MD_INIT_COUNTER;
+ TM4MD &= ~TM4MD_INIT_COUNTER;
+ TM4ICR = 0;
+ t32 = TM4ICR;
+
+ TM5MD = TM5MD_SRC_TM4CASCADE;
+ TM5MD |= TM5MD_INIT_COUNTER;
+ TM5MD &= ~TM5MD_INIT_COUNTER;
+ TM5ICR = 0;
+ t32 = TM5ICR;
+
+ TM5MD |= TM5MD_COUNT_ENABLE;
+ TM4MD |= TM4MD_COUNT_ENABLE;
+ t32 = TM5MD;
+ t32 = TM4MD;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+ u8 t8;
+ TM4MD = 0;
+ TM5MD = 0;
+ t8 = TM4MD;
+ t8 = TM5MD;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+ return (cycles_t)~TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */
diff --git a/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/leds.c b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/leds.c
new file mode 100644
index 0000000..6f8de99
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/leds.c
@@ -0,0 +1,124 @@
+/* ASB2305 Peripheral 7-segment LEDs x4 support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc-regs.h>
+#include <unit/leds.h>
+
+static const u8 asb2305_led_hex_tbl[16] = {
+ 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0,
+ 0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c
+};
+
+static const u32 asb2305_led_chase_tbl[6] = {
+ ~0x02020202, /* top - segA */
+ ~0x04040404, /* right top - segB */
+ ~0x08080808, /* right bottom - segC */
+ ~0x10101010, /* bottom - segD */
+ ~0x20202020, /* left bottom - segE */
+ ~0x40404040, /* left top - segF */
+};
+
+static unsigned asb2305_led_chase;
+
+void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points)
+{
+ u32 leds;
+
+ leds = asb2305_led_hex_tbl[(val/1000) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(val/100) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(val/10) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[val % 10];
+ leds |= points^0x01010101;
+
+ ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points)
+{
+ u32 leds;
+
+ leds = asb2305_led_hex_tbl[(val/1000) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(val/100) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(val/10) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[val % 10];
+ leds |= points^0x01010101;
+
+ ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds_display_exception(enum exception_code code)
+{
+ u32 leds;
+
+ leds = asb2305_led_hex_tbl[(code/0x100) % 0x10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(code/0x10) % 0x10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[code % 0x10];
+ leds |= 0x6d010101;
+
+ ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_minssecs(unsigned int time, unsigned int points)
+{
+ u32 leds;
+
+ leds = asb2305_led_hex_tbl[(time/600) % 6];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(time/60) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(time/10) % 6];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[time % 10];
+ leds |= points^0x01010101;
+
+ ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_rtc(void)
+{
+ unsigned int clock;
+ u8 mins, secs;
+
+ mins = RTMCR;
+ secs = RTSCR;
+
+ clock = ((mins & 0xf0) >> 4);
+ clock *= 10;
+ clock += (mins & 0x0f);
+ clock *= 6;
+
+ clock += ((secs & 0xf0) >> 4);
+ clock *= 10;
+ clock += (secs & 0x0f);
+
+ peripheral_leds7x4_display_minssecs(clock, 0);
+}
+
+void peripheral_leds_led_chase(void)
+{
+ ASB2305_7SEGLEDS = asb2305_led_chase_tbl[asb2305_led_chase];
+ asb2305_led_chase++;
+ if (asb2305_led_chase >= 6)
+ asb2305_led_chase = 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/pci-asb2305.c b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/pci-asb2305.c
new file mode 100644
index 0000000..e0f4617
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/pci-asb2305.c
@@ -0,0 +1,212 @@
+/* ASB2305 PCI resource stuff
+ *
+ * Copyright (C) 2001 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/i386/pci-i386.c
+ * - Copyright 1997--2000 Martin Mares <mj@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include "pci-asb2305.h"
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ resource_size_t start = res->start;
+
+#if 0
+ struct pci_dev *dev = data;
+
+ printk(KERN_DEBUG
+ "### PCIBIOS_ALIGN_RESOURCE(%s,,{%08lx-%08lx,%08lx},%lx)\n",
+ pci_name(dev),
+ res->start,
+ res->end,
+ res->flags,
+ size
+ );
+#endif
+
+ if ((res->flags & IORESOURCE_IO) && (start & 0x300))
+ start = (start + 0x3ff) & ~0x3ff;
+
+ return start;
+}
+
+
+/*
+ * Handle resources of PCI devices. If the world were perfect, we could
+ * just allocate all the resource regions and do nothing more. It isn't.
+ * On the other hand, we cannot just re-allocate all devices, as it would
+ * require us to know lots of host bridge internals. So we attempt to
+ * keep as much of the original configuration as possible, but tweak it
+ * when it's found to be wrong.
+ *
+ * Known BIOS problems we have to work around:
+ * - I/O or memory regions not configured
+ * - regions configured, but not enabled in the command register
+ * - bogus I/O addresses above 64K used
+ * - expansion ROMs left enabled (this may sound harmless, but given
+ * the fact the PCI specs explicitly allow address decoders to be
+ * shared between expansion ROMs and other resource regions, it's
+ * at least dangerous)
+ *
+ * Our solution:
+ * (1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ * This gives us fixed barriers on where we can allocate.
+ * (2) Allocate resources for all enabled devices. If there is
+ * a collision, just mark the resource as unallocated. Also
+ * disable expansion ROMs during this step.
+ * (3) Try to allocate resources for disabled devices. If the
+ * resources were assigned correctly, everything goes well,
+ * if they weren't, they won't disturb allocation of other
+ * resources.
+ * (4) Assign new addresses to resources which were either
+ * not configured at all or misconfigured. If explicitly
+ * requested by the user, configure expansion ROM address
+ * as well.
+ */
+static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
+{
+ struct pci_bus *bus;
+ struct pci_dev *dev;
+ int idx;
+ struct resource *r;
+
+ /* Depth-First Search on bus tree */
+ list_for_each_entry(bus, bus_list, node) {
+ dev = bus->self;
+ if (dev) {
+ for (idx = PCI_BRIDGE_RESOURCES;
+ idx < PCI_NUM_RESOURCES;
+ idx++) {
+ r = &dev->resource[idx];
+ if (!r->flags)
+ continue;
+ if (!r->start ||
+ pci_claim_bridge_resource(dev, idx) < 0) {
+ printk(KERN_ERR "PCI:"
+ " Cannot allocate resource"
+ " region %d of bridge %s\n",
+ idx, pci_name(dev));
+ /* Something is wrong with the region.
+ * Invalidate the resource to prevent
+ * child resource allocations in this
+ * range. */
+ r->start = r->end = 0;
+ r->flags = 0;
+ }
+ }
+ }
+ pcibios_allocate_bus_resources(&bus->children);
+ }
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+ struct pci_dev *dev = NULL;
+ int idx, disabled;
+ u16 command;
+ struct resource *r;
+
+ for_each_pci_dev(dev) {
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ for (idx = 0; idx < 6; idx++) {
+ r = &dev->resource[idx];
+ if (r->parent) /* Already allocated */
+ continue;
+ if (!r->start) /* Address not assigned */
+ continue;
+ if (r->flags & IORESOURCE_IO)
+ disabled = !(command & PCI_COMMAND_IO);
+ else
+ disabled = !(command & PCI_COMMAND_MEMORY);
+ if (pass == disabled) {
+ DBG("PCI[%s]: Resource %08lx-%08lx"
+ " (f=%lx, d=%d, p=%d)\n",
+ pci_name(dev), r->start, r->end, r->flags,
+ disabled, pass);
+ if (pci_claim_resource(dev, idx) < 0) {
+ printk(KERN_ERR "PCI:"
+ " Cannot allocate resource"
+ " region %d of device %s\n",
+ idx, pci_name(dev));
+ /* We'll assign a new address later */
+ r->end -= r->start;
+ r->start = 0;
+ }
+ }
+ }
+ if (!pass) {
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ if (r->flags & IORESOURCE_ROM_ENABLE) {
+ /* Turn the ROM off, leave the resource region,
+ * but keep it unregistered. */
+ u32 reg;
+ DBG("PCI: Switching off ROM of %s\n",
+ pci_name(dev));
+ r->flags &= ~IORESOURCE_ROM_ENABLE;
+ pci_read_config_dword(
+ dev, dev->rom_base_reg, ®);
+ pci_write_config_dword(
+ dev, dev->rom_base_reg,
+ reg & ~PCI_ROM_ADDRESS_ENABLE);
+ }
+ }
+ }
+}
+
+static int __init pcibios_assign_resources(void)
+{
+ struct pci_dev *dev = NULL;
+ struct resource *r;
+
+ /* Try to use BIOS settings for ROMs, otherwise let
+ pci_assign_unassigned_resources() allocate the new
+ addresses. */
+ for_each_pci_dev(dev) {
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ if (!r->flags || !r->start)
+ continue;
+ if (pci_claim_resource(dev, PCI_ROM_RESOURCE) < 0) {
+ r->end -= r->start;
+ r->start = 0;
+ }
+ }
+
+ pci_assign_unassigned_resources();
+
+ return 0;
+}
+
+fs_initcall(pcibios_assign_resources);
+
+void __init pcibios_resource_survey(void)
+{
+ DBG("PCI: Allocating resources\n");
+ pcibios_allocate_bus_resources(&pci_root_buses);
+ pcibios_allocate_resources(0);
+ pcibios_allocate_resources(1);
+}
diff --git a/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/pci-asb2305.h b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/pci-asb2305.h
new file mode 100644
index 0000000..96c484b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/pci-asb2305.h
@@ -0,0 +1,68 @@
+/* ASB2305 Arch-specific PCI declarations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from: arch/i386/kernel/pci-i386.h: (c) 1999 Martin Mares <mj@ucw.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _PCI_ASB2305_H
+#define _PCI_ASB2305_H
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+extern unsigned int pci_probe;
+
+/* pci-asb2305.c */
+
+extern void pcibios_resource_survey(void);
+
+/* pci.c */
+
+extern struct pci_ops *pci_root_ops;
+
+extern struct irq_routing_table *pcibios_get_irq_routing_table(void);
+extern int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
+
+/* pci-irq.c */
+
+struct irq_info {
+ u8 bus, devfn; /* Bus, device and function */
+ struct {
+ u8 link; /* IRQ line ID, chipset dependent,
+ * 0=not routed */
+ u16 bitmap; /* Available IRQs */
+ } __attribute__((packed)) irq[4];
+ u8 slot; /* Slot number, 0=onboard */
+ u8 rfu;
+} __attribute__((packed));
+
+struct irq_routing_table {
+ u32 signature; /* PIRQ_SIGNATURE should be here */
+ u16 version; /* PIRQ_VERSION */
+ u16 size; /* Table size in bytes */
+ u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
+ u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
+ u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */
+ u32 miniport_data; /* Crap */
+ u8 rfu[11];
+ u8 checksum; /* Modulo 256 checksum must give zero */
+ struct irq_info slots[0];
+} __attribute__((packed));
+
+extern unsigned int pcibios_irq_mask;
+
+extern void pcibios_irq_init(void);
+extern void pcibios_fixup_irqs(void);
+extern void pcibios_enable_irq(struct pci_dev *dev);
+
+#endif /* PCI_ASB2305_H */
diff --git a/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/pci-irq.c b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/pci-irq.c
new file mode 100644
index 0000000..fcb28ce
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/pci-irq.c
@@ -0,0 +1,46 @@
+/* PCI IRQ routing on the MN103E010 based ASB2305
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ * This is simple: All PCI interrupts route through the CPU's XIRQ1 pin [IRQ 35]
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include "pci-asb2305.h"
+
+void __init pcibios_irq_init(void)
+{
+}
+
+void __init pcibios_fixup_irqs(void)
+{
+ struct pci_dev *dev = NULL;
+ u8 line, pin;
+
+ for_each_pci_dev(dev) {
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ if (pin) {
+ dev->irq = XIRQ1;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+ dev->irq);
+ }
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
+ }
+}
+
+void pcibios_enable_irq(struct pci_dev *dev)
+{
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+}
diff --git a/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/pci.c b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/pci.c
new file mode 100644
index 0000000..3dfe2d3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/pci.c
@@ -0,0 +1,505 @@
+/* ASB2305 PCI support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from arch/i386/kernel/pci-pc.c
+ * (c) 1999--2000 Martin Mares <mj@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include "pci-asb2305.h"
+
+unsigned int pci_probe = 1;
+
+struct pci_ops *pci_root_ops;
+
+/*
+ * The accessible PCI window does not cover the entire CPU address space, but
+ * there are devices we want to access outside of that window, so we need to
+ * insert specific PCI bus resources instead of using the platform-level bus
+ * resources directly for the PCI root bus.
+ *
+ * These are configured and inserted by pcibios_init().
+ */
+static struct resource pci_ioport_resource = {
+ .name = "PCI IO",
+ .start = 0xbe000000,
+ .end = 0xbe03ffff,
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource pci_iomem_resource = {
+ .name = "PCI mem",
+ .start = 0xb8000000,
+ .end = 0xbbffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+/*
+ * Functions for accessing PCI configuration space
+ */
+
+#define CONFIG_CMD(bus, devfn, where) \
+ (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
+
+#define MEM_PAGING_REG (*(volatile __u32 *) 0xBFFFFFF4)
+#define CONFIG_ADDRESS (*(volatile __u32 *) 0xBFFFFFF8)
+#define CONFIG_DATAL(X) (*(volatile __u32 *) 0xBFFFFFFC)
+#define CONFIG_DATAW(X) (*(volatile __u16 *) (0xBFFFFFFC + ((X) & 2)))
+#define CONFIG_DATAB(X) (*(volatile __u8 *) (0xBFFFFFFC + ((X) & 3)))
+
+#define BRIDGEREGB(X) (*(volatile __u8 *) (0xBE040000 + (X)))
+#define BRIDGEREGW(X) (*(volatile __u16 *) (0xBE040000 + (X)))
+#define BRIDGEREGL(X) (*(volatile __u32 *) (0xBE040000 + (X)))
+
+static inline int __query(const struct pci_bus *bus, unsigned int devfn)
+{
+#if 0
+ return bus->number == 0 && (devfn == PCI_DEVFN(0, 0));
+ return bus->number == 1;
+ return bus->number == 0 &&
+ (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(3, 0));
+#endif
+ return 1;
+}
+
+/*
+ *
+ */
+static int pci_ampci_read_config_byte(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 *_value)
+{
+ u32 rawval, value;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ value = BRIDGEREGB(where);
+ __pcbdebug("=> %02hx", &BRIDGEREGL(where), value);
+ } else {
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ value = CONFIG_DATAB(where);
+ if (__query(bus, devfn))
+ __pcidebug("=> %02hx", bus, devfn, where, value);
+ }
+
+ *_value = value;
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_read_config_word(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 *_value)
+{
+ u32 rawval, value;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ value = BRIDGEREGW(where);
+ __pcbdebug("=> %04hx", &BRIDGEREGL(where), value);
+ } else {
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ value = CONFIG_DATAW(where);
+ if (__query(bus, devfn))
+ __pcidebug("=> %04hx", bus, devfn, where, value);
+ }
+
+ *_value = value;
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_read_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 *_value)
+{
+ u32 rawval, value;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ value = BRIDGEREGL(where);
+ __pcbdebug("=> %08x", &BRIDGEREGL(where), value);
+ } else {
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ value = CONFIG_DATAL(where);
+ if (__query(bus, devfn))
+ __pcidebug("=> %08x", bus, devfn, where, value);
+ }
+
+ *_value = value;
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_write_config_byte(struct pci_bus *bus, unsigned int devfn,
+ int where, u8 value)
+{
+ u32 rawval;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ __pcbdebug("<= %02x", &BRIDGEREGB(where), value);
+ BRIDGEREGB(where) = value;
+ } else {
+ if (bus->number == 0 &&
+ (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(3, 0))
+ )
+ __pcidebug("<= %02x", bus, devfn, where, value);
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ CONFIG_DATAB(where) = value;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_write_config_word(struct pci_bus *bus, unsigned int devfn,
+ int where, u16 value)
+{
+ u32 rawval;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ __pcbdebug("<= %04hx", &BRIDGEREGW(where), value);
+ BRIDGEREGW(where) = value;
+ } else {
+ if (__query(bus, devfn))
+ __pcidebug("<= %04hx", bus, devfn, where, value);
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ CONFIG_DATAW(where) = value;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_write_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 value)
+{
+ u32 rawval;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ __pcbdebug("<= %08x", &BRIDGEREGL(where), value);
+ BRIDGEREGL(where) = value;
+ } else {
+ if (__query(bus, devfn))
+ __pcidebug("<= %08x", bus, devfn, where, value);
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ CONFIG_DATAL(where) = value;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ switch (size) {
+ case 1:
+ return pci_ampci_read_config_byte(bus, devfn, where, val);
+ case 2:
+ return pci_ampci_read_config_word(bus, devfn, where, val);
+ case 4:
+ return pci_ampci_read_config_dword(bus, devfn, where, val);
+ default:
+ BUG();
+ return -EOPNOTSUPP;
+ }
+}
+
+static int pci_ampci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ switch (size) {
+ case 1:
+ return pci_ampci_write_config_byte(bus, devfn, where, val);
+ case 2:
+ return pci_ampci_write_config_word(bus, devfn, where, val);
+ case 4:
+ return pci_ampci_write_config_dword(bus, devfn, where, val);
+ default:
+ BUG();
+ return -EOPNOTSUPP;
+ }
+}
+
+static struct pci_ops pci_direct_ampci = {
+ .read = pci_ampci_read_config,
+ .write = pci_ampci_write_config,
+};
+
+/*
+ * Before we decide to use direct hardware access mechanisms, we try to do some
+ * trivial checks to ensure it at least _seems_ to be working -- we just test
+ * whether bus 00 contains a host bridge (this is similar to checking
+ * techniques used in XFree86, but ours should be more reliable since we
+ * attempt to make use of direct access hints provided by the PCI BIOS).
+ *
+ * This should be close to trivial, but it isn't, because there are buggy
+ * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
+ */
+static int __init pci_sanity_check(struct pci_ops *o)
+{
+ struct pci_bus bus; /* Fake bus and device */
+ u32 x;
+
+ bus.number = 0;
+
+ if ((!o->read(&bus, 0, PCI_CLASS_DEVICE, 2, &x) &&
+ (x == PCI_CLASS_BRIDGE_HOST || x == PCI_CLASS_DISPLAY_VGA)) ||
+ (!o->read(&bus, 0, PCI_VENDOR_ID, 2, &x) &&
+ (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ)))
+ return 1;
+
+ printk(KERN_ERR "PCI: Sanity check failed\n");
+ return 0;
+}
+
+static int __init pci_check_direct(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /*
+ * Check if access works.
+ */
+ if (pci_sanity_check(&pci_direct_ampci)) {
+ local_irq_restore(flags);
+ printk(KERN_INFO "PCI: Using configuration ampci\n");
+ request_mem_region(0xBE040000, 256, "AMPCI bridge");
+ request_mem_region(0xBFFFFFF4, 12, "PCI ampci");
+ request_mem_region(0xBC000000, 32 * 1024 * 1024, "PCI SRAM");
+ return 0;
+ }
+
+ local_irq_restore(flags);
+ return -ENODEV;
+}
+
+static void pcibios_fixup_device_resources(struct pci_dev *dev)
+{
+ int idx;
+
+ if (!dev->bus)
+ return;
+
+ for (idx = 0; idx < PCI_BRIDGE_RESOURCES; idx++) {
+ struct resource *r = &dev->resource[idx];
+
+ if (!r->flags || r->parent || !r->start)
+ continue;
+
+ pci_claim_resource(dev, idx);
+ }
+}
+
+static void pcibios_fixup_bridge_resources(struct pci_dev *dev)
+{
+ int idx;
+
+ if (!dev->bus)
+ return;
+
+ for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {
+ struct resource *r = &dev->resource[idx];
+
+ if (!r->flags || r->parent || !r->start)
+ continue;
+
+ pci_claim_bridge_resource(dev, idx);
+ }
+}
+
+/*
+ * Called after each bus is probed, but before its children
+ * are examined.
+ */
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ if (bus->self) {
+ pci_read_bridge_bases(bus);
+ pcibios_fixup_bridge_resources(bus->self);
+ }
+
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ pcibios_fixup_device_resources(dev);
+}
+
+/*
+ * Initialization. Try all known PCI access methods. Note that we support
+ * using both PCI BIOS and direct access: in such cases, we use I/O ports
+ * to access config space, but we still keep BIOS order of cards to be
+ * compatible with 2.0.X. This should go away some day.
+ */
+static int __init pcibios_init(void)
+{
+ resource_size_t io_offset, mem_offset;
+ LIST_HEAD(resources);
+ struct pci_bus *bus;
+
+ ioport_resource.start = 0xA0000000;
+ ioport_resource.end = 0xDFFFFFFF;
+ iomem_resource.start = 0xA0000000;
+ iomem_resource.end = 0xDFFFFFFF;
+
+ if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
+ panic("Unable to insert PCI IOMEM resource\n");
+ if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
+ panic("Unable to insert PCI IOPORT resource\n");
+
+ if (!pci_probe)
+ return 0;
+
+ if (pci_check_direct() < 0) {
+ printk(KERN_WARNING "PCI: No PCI bus detected\n");
+ return 0;
+ }
+
+ printk(KERN_INFO "PCI: Probing PCI hardware [mempage %08x]\n",
+ MEM_PAGING_REG);
+
+ io_offset = pci_ioport_resource.start -
+ (pci_ioport_resource.start & 0x00ffffff);
+ mem_offset = pci_iomem_resource.start -
+ ((pci_iomem_resource.start & 0x03ffffff) | MEM_PAGING_REG);
+
+ pci_add_resource_offset(&resources, &pci_ioport_resource, io_offset);
+ pci_add_resource_offset(&resources, &pci_iomem_resource, mem_offset);
+ bus = pci_scan_root_bus(NULL, 0, &pci_direct_ampci, NULL, &resources);
+ if (!bus)
+ return 0;
+
+ pcibios_irq_init();
+ pcibios_fixup_irqs();
+ pcibios_resource_survey();
+ pci_bus_add_devices(bus);
+ return 0;
+}
+
+arch_initcall(pcibios_init);
+
+char *__init pcibios_setup(char *str)
+{
+ if (!strcmp(str, "off")) {
+ pci_probe = 0;
+ return NULL;
+ }
+
+ return str;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ int err;
+
+ err = pci_enable_resources(dev, mask);
+ if (err == 0)
+ pcibios_enable_irq(dev);
+ return err;
+}
+
+/*
+ * disable the ethernet chipset
+ */
+static void __init unit_disable_pcnet(struct pci_bus *bus, struct pci_ops *o)
+{
+ u32 x;
+
+ bus->number = 0;
+
+ o->read (bus, PCI_DEVFN(2, 0), PCI_VENDOR_ID, 4, &x);
+ o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND, 2, &x);
+ x |= PCI_COMMAND_MASTER |
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+ PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
+ o->write(bus, PCI_DEVFN(2, 0), PCI_COMMAND, 2, x);
+ o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND, 2, &x);
+ o->write(bus, PCI_DEVFN(2, 0), PCI_BASE_ADDRESS_0, 4, 0x00030001);
+ o->read (bus, PCI_DEVFN(2, 0), PCI_BASE_ADDRESS_0, 4, &x);
+
+#define RDP (*(volatile u32 *) 0xBE030010)
+#define RAP (*(volatile u32 *) 0xBE030014)
+#define __set_RAP(X) do { RAP = (X); x = RAP; } while (0)
+#define __set_RDP(X) do { RDP = (X); x = RDP; } while (0)
+#define __get_RDP() ({ RDP & 0xffff; })
+
+ __set_RAP(0);
+ __set_RDP(0x0004); /* CSR0 = STOP */
+
+ __set_RAP(88); /* check CSR88 indicates an Am79C973 */
+ BUG_ON(__get_RDP() != 0x5003);
+
+ for (x = 0; x < 100; x++)
+ asm volatile("nop");
+
+ __set_RDP(0x0004); /* CSR0 = STOP */
+}
+
+/*
+ * initialise the unit hardware
+ */
+asmlinkage void __init unit_pci_init(void)
+{
+ struct pci_bus bus; /* Fake bus and device */
+ struct pci_ops *o = &pci_direct_ampci;
+ u32 x;
+
+ set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_PCI_IRQ_LEVEL));
+
+ memset(&bus, 0, sizeof(bus));
+
+ MEM_PAGING_REG = 0xE8000000;
+
+ /* we need to set up the bridge _now_ or we won't be able to access the
+ * PCI config registers
+ */
+ BRIDGEREGW(PCI_COMMAND) |=
+ PCI_COMMAND_SERR | PCI_COMMAND_PARITY |
+ PCI_COMMAND_MEMORY | PCI_COMMAND_IO | PCI_COMMAND_MASTER;
+ BRIDGEREGW(PCI_STATUS) = 0xF800;
+ BRIDGEREGB(PCI_LATENCY_TIMER) = 0x10;
+ BRIDGEREGL(PCI_BASE_ADDRESS_0) = 0x80000000;
+ BRIDGEREGB(PCI_INTERRUPT_LINE) = 1;
+ BRIDGEREGL(0x48) = 0x98000000; /* AMPCI base addr */
+ BRIDGEREGB(0x41) = 0x00; /* secondary bus
+ * number */
+ BRIDGEREGB(0x42) = 0x01; /* subordinate bus
+ * number */
+ BRIDGEREGB(0x44) = 0x01;
+ BRIDGEREGL(0x50) = 0x00000001;
+ BRIDGEREGL(0x58) = 0x00001002;
+ BRIDGEREGL(0x5C) = 0x00000011;
+
+ /* we also need to set up the PCI-PCI bridge */
+ bus.number = 0;
+
+ /* IO: 0x00000000-0x00020000 */
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_COMMAND, 2, &x);
+ x |= PCI_COMMAND_MASTER |
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+ PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
+ o->write(&bus, PCI_DEVFN(3, 0), PCI_COMMAND, 2, x);
+
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE, 1, &x);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16, 4, &x);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE, 4, &x);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE, 4, &x);
+
+ o->write(&bus, PCI_DEVFN(3, 0), PCI_IO_BASE, 1, 0x01);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE, 1, &x);
+ o->write(&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16, 4, 0x00020000);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16, 4, &x);
+ o->write(&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE, 4, 0xEBB0EA00);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE, 4, &x);
+ o->write(&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE, 4, 0xE9F0E800);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE, 4, &x);
+
+ unit_disable_pcnet(&bus, o);
+}
diff --git a/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/unit-init.c b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/unit-init.c
new file mode 100644
index 0000000..bc4adfa
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/mn10300/unit-asb2305/unit-init.c
@@ -0,0 +1,63 @@
+/* ASB2305 Initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/serial-regs.h>
+#include <unit/serial.h>
+
+/*
+ * initialise some of the unit hardware before gdbstub is set up
+ */
+asmlinkage void __init unit_init(void)
+{
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+ /* set the 16550 interrupt line to level 3 if not being used for GDB */
+#ifdef CONFIG_EXT_SERIAL_IRQ_LEVEL
+ set_intr_level(XIRQ0, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL));
+#endif
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+}
+
+/*
+ * initialise the rest of the unit hardware after gdbstub is ready
+ */
+void __init unit_setup(void)
+{
+#ifdef CONFIG_PCI
+ unit_pci_init();
+#endif
+}
+
+/*
+ * initialise the external interrupts used by a unit of this type
+ */
+void __init unit_init_IRQ(void)
+{
+ unsigned int extnum;
+
+ for (extnum = 0; extnum < NR_XIRQS; extnum++) {
+ switch (GET_XIRQ_TRIGGER(extnum)) {
+ case XIRQ_TRIGGER_HILEVEL:
+ case XIRQ_TRIGGER_LOWLEVEL:
+ mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum));
+ break;
+ default:
+ break;
+ }
+ }
+}