diff --git a/src/kernel/linux/v4.14/arch/openrisc/Kconfig b/src/kernel/linux/v4.14/arch/openrisc/Kconfig
new file mode 100644
index 0000000..df2136a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/Kconfig
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+config OPENRISC
+	def_bool y
+	select OF
+	select OF_EARLY_FLATTREE
+	select IRQ_DOMAIN
+	select HANDLE_DOMAIN_IRQ
+	select HAVE_MEMBLOCK
+	select GPIOLIB
+        select HAVE_ARCH_TRACEHOOK
+	select SPARSE_IRQ
+	select GENERIC_IRQ_CHIP
+	select GENERIC_IRQ_PROBE
+	select GENERIC_IRQ_SHOW
+	select GENERIC_IOMAP
+	select GENERIC_CPU_DEVICES
+	select HAVE_UID16
+	select GENERIC_ATOMIC64
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_STRNCPY_FROM_USER
+	select GENERIC_STRNLEN_USER
+	select MODULES_USE_ELF_RELA
+	select HAVE_DEBUG_STACKOVERFLOW
+	select OR1K_PIC
+	select CPU_NO_EFFICIENT_FFS if !OPENRISC_HAVE_INST_FF1
+	select NO_BOOTMEM
+
+config CPU_BIG_ENDIAN
+	def_bool y
+
+config MMU
+	def_bool y
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool y
+
+config RWSEM_XCHGADD_ALGORITHM
+	def_bool n
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config NO_IOPORT_MAP
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+        def_bool y
+
+# For now, use generic checksum functions
+#These can be reimplemented in assembly later if so inclined
+config GENERIC_CSUM
+        def_bool y
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+menu "Processor type and features"
+
+choice
+	prompt "Subarchitecture"
+	default OR1K_1200
+
+config OR1K_1200
+	bool "OR1200"
+	help
+	  Generic OpenRISC 1200 architecture
+
+endchoice
+
+config OPENRISC_BUILTIN_DTB
+        string "Builtin DTB"
+        default ""
+
+menu "Class II Instructions"
+
+config OPENRISC_HAVE_INST_FF1
+	bool "Have instruction l.ff1"
+	default y
+	help
+	  Select this if your implementation has the Class II instruction l.ff1
+
+config OPENRISC_HAVE_INST_FL1
+	bool "Have instruction l.fl1"
+	default y
+	help
+	  Select this if your implementation has the Class II instruction l.fl1
+
+config OPENRISC_HAVE_INST_MUL
+	bool "Have instruction l.mul for hardware multiply"
+	default y
+	help
+	  Select this if your implementation has a hardware multiply instruction
+
+config OPENRISC_HAVE_INST_DIV
+	bool "Have instruction l.div for hardware divide"
+	default y
+	help
+	  Select this if your implementation has a hardware divide instruction
+endmenu
+
+config NR_CPUS
+	int
+	default "1"
+
+source kernel/Kconfig.hz
+source kernel/Kconfig.preempt
+source "mm/Kconfig"
+
+config OPENRISC_NO_SPR_SR_DSX
+	bool "use SPR_SR_DSX software emulation" if OR1K_1200
+	default y
+	help
+	  SPR_SR_DSX bit is status register bit indicating whether
+	  the last exception has happened in delay slot.
+
+	  OpenRISC architecture makes it optional to have it implemented
+	  in hardware and the OR1200 does not have it.
+
+	  Say N here if you know that your OpenRISC processor has
+	  SPR_SR_DSX bit implemented. Say Y if you are unsure.
+
+config CMDLINE
+        string "Default kernel command string"
+        default ""
+        help
+          On some architectures there is currently no way for the boot loader
+          to pass arguments to the kernel. For these architectures, you should
+          supply some command-line options at build time by entering them
+          here.
+
+menu "Debugging options"
+
+config JUMP_UPON_UNHANDLED_EXCEPTION
+	bool "Try to die gracefully"
+	default y
+	help
+	  Now this puts kernel into infinite loop after first oops. Till
+	  your kernel crashes this doesn't have any influence.
+
+	  Say Y if you are unsure.
+
+config OPENRISC_ESR_EXCEPTION_BUG_CHECK
+	bool "Check for possible ESR exception bug"
+	default n
+	help
+	  This option enables some checks that might expose some problems
+          in kernel.
+
+	  Say N if you are unsure.
+
+endmenu
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+endmenu
diff --git a/src/kernel/linux/v4.14/arch/openrisc/Makefile b/src/kernel/linux/v4.14/arch/openrisc/Makefile
new file mode 100644
index 0000000..89076a6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/Makefile
@@ -0,0 +1,55 @@
+# BK Id: %F% %I% %G% %U% %#%
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies. Remember to do have actions
+# for "archclean" and "archdep" for cleaning up and making dependencies for
+# this architecture
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1994 by Linus Torvalds
+# Modifications for the OpenRISC architecture:
+# Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+# Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+#
+# Based on:
+# arch/i386/Makefile
+
+KBUILD_DEFCONFIG := or1ksim_defconfig
+
+LDFLAGS         :=
+OBJCOPYFLAGS    := -O binary -R .note -R .comment -S
+LDFLAGS_vmlinux :=
+LIBGCC 		:= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+
+KBUILD_CFLAGS	+= -pipe -ffixed-r10 -D__linux__
+
+ifeq ($(CONFIG_OPENRISC_HAVE_INST_MUL),y)
+	KBUILD_CFLAGS += $(call cc-option,-mhard-mul)
+else
+	KBUILD_CFLAGS += $(call cc-option,-msoft-mul)
+endif
+
+ifeq ($(CONFIG_OPENRISC_HAVE_INST_DIV),y)
+	KBUILD_CFLAGS += $(call cc-option,-mhard-div)
+else
+	KBUILD_CFLAGS += $(call cc-option,-msoft-div)
+endif
+
+head-y 		:= arch/openrisc/kernel/head.o
+
+core-y		+= arch/openrisc/lib/ \
+		   arch/openrisc/kernel/ \
+		   arch/openrisc/mm/
+libs-y		+= $(LIBGCC)
+
+ifneq '$(CONFIG_OPENRISC_BUILTIN_DTB)' '""'
+BUILTIN_DTB := y
+else
+BUILTIN_DTB := n
+endif
+core-$(BUILTIN_DTB) += arch/openrisc/boot/dts/
+
+all: vmlinux
diff --git a/src/kernel/linux/v4.14/arch/openrisc/README.openrisc b/src/kernel/linux/v4.14/arch/openrisc/README.openrisc
new file mode 100644
index 0000000..072069a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/README.openrisc
@@ -0,0 +1,99 @@
+OpenRISC Linux
+==============
+
+This is a port of Linux to the OpenRISC class of microprocessors; the initial
+target architecture, specifically, is the 32-bit OpenRISC 1000 family (or1k).
+
+For information about OpenRISC processors and ongoing development:
+
+	website		http://openrisc.io
+
+For more information about Linux on OpenRISC, please contact South Pole AB.
+
+	email:		info@southpole.se
+
+	website:	http://southpole.se
+			http://southpoleconsulting.com
+
+---------------------------------------------------------------------
+
+Build instructions for OpenRISC toolchain and Linux
+===================================================
+
+In order to build and run Linux for OpenRISC, you'll need at least a basic
+toolchain and, perhaps, the architectural simulator.  Steps to get these bits
+in place are outlined here.
+
+1)  The toolchain can be obtained from openrisc.io.  Instructions for building
+a toolchain can be found at:
+
+https://github.com/openrisc/tutorials
+
+2) or1ksim (optional)
+
+or1ksim is the architectural simulator which will allow you to actually run
+your OpenRISC Linux kernel if you don't have an OpenRISC processor at hand.
+
+	git clone https://github.com/openrisc/or1ksim.git
+
+	cd or1ksim
+	./configure --prefix=$OPENRISC_PREFIX
+	make
+	make install
+
+3)  Linux kernel
+
+Build the kernel as usual
+
+	make ARCH=openrisc defconfig
+	make ARCH=openrisc
+
+4)  Run in architectural simulator
+
+Grab the or1ksim platform configuration file (from the or1ksim source) and
+together with your freshly built vmlinux, run your kernel with the following
+incantation:
+
+	sim -f arch/openrisc/or1ksim.cfg vmlinux
+
+---------------------------------------------------------------------
+
+Terminology
+===========
+
+In the code, the following particles are used on symbols to limit the scope
+to more or less specific processor implementations:
+
+openrisc: the OpenRISC class of processors
+or1k:     the OpenRISC 1000 family of processors
+or1200:   the OpenRISC 1200 processor
+
+---------------------------------------------------------------------
+
+History
+========
+
+18. 11. 2003	Matjaz Breskvar (phoenix@bsemi.com)
+	initial port of linux to OpenRISC/or32 architecture.
+        all the core stuff is implemented and seams usable.
+
+08. 12. 2003	Matjaz Breskvar (phoenix@bsemi.com)
+	complete change of TLB miss handling.
+	rewrite of exceptions handling.
+	fully functional sash-3.6 in default initrd.
+	a much improved version with changes all around.
+
+10. 04. 2004	Matjaz Breskvar (phoenix@bsemi.com)
+	alot of bugfixes all over.
+	ethernet support, functional http and telnet servers.
+	running many standard linux apps.
+
+26. 06. 2004	Matjaz Breskvar (phoenix@bsemi.com)
+	port to 2.6.x
+
+30. 11. 2004	Matjaz Breskvar (phoenix@bsemi.com)
+	lots of bugfixes and enhancments.
+	added opencores framebuffer driver.
+
+09. 10. 2010    Jonas Bonn (jonas@southpole.se)
+	major rewrite to bring up to par with upstream Linux 2.6.36
diff --git a/src/kernel/linux/v4.14/arch/openrisc/TODO.openrisc b/src/kernel/linux/v4.14/arch/openrisc/TODO.openrisc
new file mode 100644
index 0000000..c43d4e1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/TODO.openrisc
@@ -0,0 +1,12 @@
+The OpenRISC Linux port is fully functional and has been tracking upstream
+since 2.6.35.  There are, however, remaining items to be completed within
+the coming months.  Here's a list of known-to-be-less-than-stellar items
+that are due for investigation shortly, i.e. our TODO list:
+
+-- Implement the rest of the DMA API... dma_map_sg, etc.
+
+-- Finish the renaming cleanup... there are references to or32 in the code
+   which was an older name for the architecture.  The name we've settled on is
+   or1k and this change is slowly trickling through the stack.  For the time
+   being, or32 is equivalent to or1k.
+
diff --git a/src/kernel/linux/v4.14/arch/openrisc/boot/dts/Makefile b/src/kernel/linux/v4.14/arch/openrisc/boot/dts/Makefile
new file mode 100644
index 0000000..792ce71
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/boot/dts/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+ifneq '$(CONFIG_OPENRISC_BUILTIN_DTB)' '""'
+BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_OPENRISC_BUILTIN_DTB)).dtb.o
+else
+BUILTIN_DTB :=
+endif
+obj-y += $(BUILTIN_DTB)
+
+clean-files := *.dtb.S
+
+#DTC_FLAGS ?= -p 1024
diff --git a/src/kernel/linux/v4.14/arch/openrisc/boot/dts/or1ksim.dts b/src/kernel/linux/v4.14/arch/openrisc/boot/dts/or1ksim.dts
new file mode 100644
index 0000000..9f4b856
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/boot/dts/or1ksim.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/ {
+	compatible = "opencores,or1ksim";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&pic>;
+
+	chosen {
+		bootargs = "console=uart,mmio,0x90000000,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "opencores,or1200-rtlsvn481";
+			reg = <0>;
+			clock-frequency = <20000000>;
+		};
+	};
+
+	/*
+	 * OR1K PIC is built into CPU and accessed via special purpose
+	 * registers.  It is not addressable and, hence, has no 'reg'
+	 * property.
+	 */
+	pic: pic {
+		compatible = "opencores,or1k-pic";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	serial0: serial@90000000 {
+		compatible = "opencores,uart16550-rtlsvn105", "ns16550a";
+		reg = <0x90000000 0x100>;
+		interrupts = <2>;
+		clock-frequency = <20000000>;
+	};
+
+	enet0: ethoc@92000000 {
+		compatible = "opencores,ethmac-rtlsvn338";
+		reg = <0x92000000 0x100>;
+		interrupts = <4>;
+	};
+};
diff --git a/src/kernel/linux/v4.14/arch/openrisc/configs/or1ksim_defconfig b/src/kernel/linux/v4.14/arch/openrisc/configs/or1ksim_defconfig
new file mode 100644
index 0000000..a73aa90
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/configs/or1ksim_defconfig
@@ -0,0 +1,58 @@
+CONFIG_CROSS_COMPILE="or1k-linux-"
+CONFIG_NO_HZ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+CONFIG_EXPERT=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_EPOLL is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+CONFIG_MODULES=y
+# CONFIG_BLOCK is not set
+CONFIG_OPENRISC_BUILTIN_DTB="or1ksim"
+CONFIG_HZ_100=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_NETDEVICES=y
+CONFIG_ETHOC=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/Kbuild b/src/kernel/linux/v4.14/arch/openrisc/include/asm/Kbuild
new file mode 100644
index 0000000..5bea416
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/Kbuild
@@ -0,0 +1,40 @@
+generic-y += barrier.h
+generic-y += bug.h
+generic-y += bugs.h
+generic-y += cacheflush.h
+generic-y += checksum.h
+generic-y += clkdev.h
+generic-y += current.h
+generic-y += device.h
+generic-y += div64.h
+generic-y += dma.h
+generic-y += emergency-restart.h
+generic-y += exec.h
+generic-y += extable.h
+generic-y += fb.h
+generic-y += ftrace.h
+generic-y += hardirq.h
+generic-y += hw_irq.h
+generic-y += irq.h
+generic-y += irq_regs.h
+generic-y += irq_work.h
+generic-y += kdebug.h
+generic-y += kmap_types.h
+generic-y += kprobes.h
+generic-y += local.h
+generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
+generic-y += module.h
+generic-y += pci.h
+generic-y += percpu.h
+generic-y += preempt.h
+generic-y += sections.h
+generic-y += segment.h
+generic-y += string.h
+generic-y += switch_to.h
+generic-y += topology.h
+generic-y += trace_clock.h
+generic-y += user.h
+generic-y += vga.h
+generic-y += word-at-a-time.h
+generic-y += xor.h
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/asm-offsets.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/asm-offsets.h
new file mode 100644
index 0000000..d370ee3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/asm-offsets.h
@@ -0,0 +1 @@
+#include <generated/asm-offsets.h>
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/atomic.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/atomic.h
new file mode 100644
index 0000000..146e166
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/atomic.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2014 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_OPENRISC_ATOMIC_H
+#define __ASM_OPENRISC_ATOMIC_H
+
+#include <linux/types.h>
+
+/* Atomically perform op with v->counter and i */
+#define ATOMIC_OP(op)							\
+static inline void atomic_##op(int i, atomic_t *v)			\
+{									\
+	int tmp;							\
+									\
+	__asm__ __volatile__(						\
+		"1:	l.lwa	%0,0(%1)	\n"			\
+		"	l." #op " %0,%0,%2	\n"			\
+		"	l.swa	0(%1),%0	\n"			\
+		"	l.bnf	1b		\n"			\
+		"	 l.nop			\n"			\
+		: "=&r"(tmp)						\
+		: "r"(&v->counter), "r"(i)				\
+		: "cc", "memory");					\
+}
+
+/* Atomically perform op with v->counter and i, return the result */
+#define ATOMIC_OP_RETURN(op)						\
+static inline int atomic_##op##_return(int i, atomic_t *v)		\
+{									\
+	int tmp;							\
+									\
+	__asm__ __volatile__(						\
+		"1:	l.lwa	%0,0(%1)	\n"			\
+		"	l." #op " %0,%0,%2	\n"			\
+		"	l.swa	0(%1),%0	\n"			\
+		"	l.bnf	1b		\n"			\
+		"	 l.nop			\n"			\
+		: "=&r"(tmp)						\
+		: "r"(&v->counter), "r"(i)				\
+		: "cc", "memory");					\
+									\
+	return tmp;							\
+}
+
+/* Atomically perform op with v->counter and i, return orig v->counter */
+#define ATOMIC_FETCH_OP(op)						\
+static inline int atomic_fetch_##op(int i, atomic_t *v)			\
+{									\
+	int tmp, old;							\
+									\
+	__asm__ __volatile__(						\
+		"1:	l.lwa	%0,0(%2)	\n"			\
+		"	l." #op " %1,%0,%3	\n"			\
+		"	l.swa	0(%2),%1	\n"			\
+		"	l.bnf	1b		\n"			\
+		"	 l.nop			\n"			\
+		: "=&r"(old), "=&r"(tmp)				\
+		: "r"(&v->counter), "r"(i)				\
+		: "cc", "memory");					\
+									\
+	return old;							\
+}
+
+ATOMIC_OP_RETURN(add)
+ATOMIC_OP_RETURN(sub)
+
+ATOMIC_FETCH_OP(add)
+ATOMIC_FETCH_OP(sub)
+ATOMIC_FETCH_OP(and)
+ATOMIC_FETCH_OP(or)
+ATOMIC_FETCH_OP(xor)
+
+ATOMIC_OP(and)
+ATOMIC_OP(or)
+ATOMIC_OP(xor)
+
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP
+
+#define atomic_add_return	atomic_add_return
+#define atomic_sub_return	atomic_sub_return
+#define atomic_fetch_add	atomic_fetch_add
+#define atomic_fetch_sub	atomic_fetch_sub
+#define atomic_fetch_and	atomic_fetch_and
+#define atomic_fetch_or		atomic_fetch_or
+#define atomic_fetch_xor	atomic_fetch_xor
+#define atomic_and	atomic_and
+#define atomic_or	atomic_or
+#define atomic_xor	atomic_xor
+
+/*
+ * Atomically add a to v->counter as long as v is not already u.
+ * Returns the original value at v->counter.
+ *
+ * This is often used through atomic_inc_not_zero()
+ */
+static inline int __atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int old, tmp;
+
+	__asm__ __volatile__(
+		"1:	l.lwa %0, 0(%2)		\n"
+		"	l.sfeq %0, %4		\n"
+		"	l.bf 2f			\n"
+		"	 l.add %1, %0, %3	\n"
+		"	l.swa 0(%2), %1		\n"
+		"	l.bnf 1b		\n"
+		"	 l.nop			\n"
+		"2:				\n"
+		: "=&r"(old), "=&r" (tmp)
+		: "r"(&v->counter), "r"(a), "r"(u)
+		: "cc", "memory");
+
+	return old;
+}
+#define __atomic_add_unless	__atomic_add_unless
+
+#include <asm-generic/atomic.h>
+
+#endif /* __ASM_OPENRISC_ATOMIC_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops.h
new file mode 100644
index 0000000..689f568
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops.h
@@ -0,0 +1,53 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_BITOPS_H
+#define __ASM_OPENRISC_BITOPS_H
+
+/*
+ * Where we haven't written assembly versions yet, we fall back to the
+ * generic implementations.  Otherwise, we pull in our (hopefully)
+ * optimized versions.
+ */
+
+#include <linux/irqflags.h>
+#include <linux/compiler.h>
+#include <asm/barrier.h>
+
+#include <asm/bitops/__ffs.h>
+#include <asm-generic/bitops/ffz.h>
+#include <asm/bitops/fls.h>
+#include <asm/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm-generic/bitops/sched.h>
+#include <asm/bitops/ffs.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+#include <asm/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
+#include <asm-generic/bitops/le.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+
+#endif /* __ASM_GENERIC_BITOPS_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops/__ffs.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops/__ffs.h
new file mode 100644
index 0000000..6c8368a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops/__ffs.h
@@ -0,0 +1,33 @@
+/*
+ * OpenRISC Linux
+ *
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC___FFS_H
+#define __ASM_OPENRISC___FFS_H
+
+
+#ifdef CONFIG_OPENRISC_HAVE_INST_FF1
+
+static inline unsigned long __ffs(unsigned long x)
+{
+	int ret;
+
+	__asm__ ("l.ff1 %0,%1"
+		 : "=r" (ret)
+		 : "r" (x));
+
+	return ret-1;
+}
+
+#else
+#include <asm-generic/bitops/__ffs.h>
+#endif
+
+#endif /* __ASM_OPENRISC___FFS_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops/__fls.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops/__fls.h
new file mode 100644
index 0000000..c4ecdb4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops/__fls.h
@@ -0,0 +1,33 @@
+/*
+ * OpenRISC Linux
+ *
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC___FLS_H
+#define __ASM_OPENRISC___FLS_H
+
+
+#ifdef CONFIG_OPENRISC_HAVE_INST_FL1
+
+static inline unsigned long __fls(unsigned long x)
+{
+	int ret;
+
+	__asm__ ("l.fl1 %0,%1"
+		 : "=r" (ret)
+		 : "r" (x));
+
+	return ret-1;
+}
+
+#else
+#include <asm-generic/bitops/__fls.h>
+#endif
+
+#endif /* __ASM_OPENRISC___FLS_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops/atomic.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops/atomic.h
new file mode 100644
index 0000000..35fb85f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops/atomic.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2014 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_OPENRISC_BITOPS_ATOMIC_H
+#define __ASM_OPENRISC_BITOPS_ATOMIC_H
+
+static inline void set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+		"1:	l.lwa	%0,0(%1)	\n"
+		"	l.or	%0,%0,%2	\n"
+		"	l.swa	0(%1),%0	\n"
+		"	l.bnf	1b		\n"
+		"	 l.nop			\n"
+		: "=&r"(tmp)
+		: "r"(p), "r"(mask)
+		: "cc", "memory");
+}
+
+static inline void clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+		"1:	l.lwa	%0,0(%1)	\n"
+		"	l.and	%0,%0,%2	\n"
+		"	l.swa	0(%1),%0	\n"
+		"	l.bnf	1b		\n"
+		"	 l.nop			\n"
+		: "=&r"(tmp)
+		: "r"(p), "r"(~mask)
+		: "cc", "memory");
+}
+
+static inline void change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+		"1:	l.lwa	%0,0(%1)	\n"
+		"	l.xor	%0,%0,%2	\n"
+		"	l.swa	0(%1),%0	\n"
+		"	l.bnf	1b		\n"
+		"	 l.nop			\n"
+		: "=&r"(tmp)
+		: "r"(p), "r"(mask)
+		: "cc", "memory");
+}
+
+static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+		"1:	l.lwa	%0,0(%2)	\n"
+		"	l.or	%1,%0,%3	\n"
+		"	l.swa	0(%2),%1	\n"
+		"	l.bnf	1b		\n"
+		"	 l.nop			\n"
+		: "=&r"(old), "=&r"(tmp)
+		: "r"(p), "r"(mask)
+		: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+		"1:	l.lwa	%0,0(%2)	\n"
+		"	l.and	%1,%0,%3	\n"
+		"	l.swa	0(%2),%1	\n"
+		"	l.bnf	1b		\n"
+		"	 l.nop			\n"
+		: "=&r"(old), "=&r"(tmp)
+		: "r"(p), "r"(~mask)
+		: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+		"1:	l.lwa	%0,0(%2)	\n"
+		"	l.xor	%1,%0,%3	\n"
+		"	l.swa	0(%2),%1	\n"
+		"	l.bnf	1b		\n"
+		"	 l.nop			\n"
+		: "=&r"(old), "=&r"(tmp)
+		: "r"(p), "r"(mask)
+		: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+#endif /* __ASM_OPENRISC_BITOPS_ATOMIC_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops/ffs.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops/ffs.h
new file mode 100644
index 0000000..9de4624
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops/ffs.h
@@ -0,0 +1,32 @@
+/*
+ * OpenRISC Linux
+ *
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_FFS_H
+#define __ASM_OPENRISC_FFS_H
+
+#ifdef CONFIG_OPENRISC_HAVE_INST_FF1
+
+static inline int ffs(int x)
+{
+	int ret;
+
+	__asm__ ("l.ff1 %0,%1"
+		 : "=r" (ret)
+		 : "r" (x));
+
+	return ret;
+}
+
+#else
+#include <asm-generic/bitops/ffs.h>
+#endif
+
+#endif /* __ASM_OPENRISC_FFS_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops/fls.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops/fls.h
new file mode 100644
index 0000000..9efbf9a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/bitops/fls.h
@@ -0,0 +1,33 @@
+/*
+ * OpenRISC Linux
+ *
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_FLS_H
+#define __ASM_OPENRISC_FLS_H
+
+
+#ifdef CONFIG_OPENRISC_HAVE_INST_FL1
+
+static inline int fls(int x)
+{
+	int ret;
+
+	__asm__ ("l.fl1 %0,%1"
+		 : "=r" (ret)
+		 : "r" (x));
+
+	return ret;
+}
+
+#else
+#include <asm-generic/bitops/fls.h>
+#endif
+
+#endif /* __ASM_OPENRISC_FLS_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/cache.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/cache.h
new file mode 100644
index 0000000..5f55da9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/cache.h
@@ -0,0 +1,31 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_CACHE_H
+#define __ASM_OPENRISC_CACHE_H
+
+/* FIXME: How can we replace these with values from the CPU...
+ * they shouldn't be hard-coded!
+ */
+
+#define __ro_after_init __read_mostly
+
+#define L1_CACHE_BYTES 16
+#define L1_CACHE_SHIFT 4
+
+#endif /* __ASM_OPENRISC_CACHE_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/cmpxchg.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/cmpxchg.h
new file mode 100644
index 0000000..f0a5d8b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/cmpxchg.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2014 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_OPENRISC_CMPXCHG_H
+#define __ASM_OPENRISC_CMPXCHG_H
+
+#include  <linux/types.h>
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg().
+ */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+	if (size != 4) {
+		__cmpxchg_called_with_bad_pointer();
+		return old;
+	}
+
+	__asm__ __volatile__(
+		"1:	l.lwa %0, 0(%1)		\n"
+		"	l.sfeq %0, %2		\n"
+		"	l.bnf 2f		\n"
+		"	 l.nop			\n"
+		"	l.swa 0(%1), %3		\n"
+		"	l.bnf 1b		\n"
+		"	 l.nop			\n"
+		"2:				\n"
+		: "=&r"(old)
+		: "r"(ptr), "r"(old), "r"(new)
+		: "cc", "memory");
+
+	return old;
+}
+
+#define cmpxchg(ptr, o, n)						\
+	({								\
+		(__typeof__(*(ptr))) __cmpxchg((ptr),			\
+					       (unsigned long)(o),	\
+					       (unsigned long)(n),	\
+					       sizeof(*(ptr)));		\
+	})
+
+/*
+ * This function doesn't exist, so you'll get a linker error if
+ * something tries to do an invalidly-sized xchg().
+ */
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
+				   int size)
+{
+	if (size != 4) {
+		__xchg_called_with_bad_pointer();
+		return val;
+	}
+
+	__asm__ __volatile__(
+		"1:	l.lwa %0, 0(%1)		\n"
+		"	l.swa 0(%1), %2		\n"
+		"	l.bnf 1b		\n"
+		"	 l.nop			\n"
+		: "=&r"(val)
+		: "r"(ptr), "r"(val)
+		: "cc", "memory");
+
+	return val;
+}
+
+#define xchg(ptr, with) 						\
+	({								\
+		(__typeof__(*(ptr))) __xchg((unsigned long)(with),	\
+					    (ptr),			\
+					    sizeof(*(ptr)));		\
+	})
+
+#endif /* __ASM_OPENRISC_CMPXCHG_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/cpuinfo.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/cpuinfo.h
new file mode 100644
index 0000000..ec10679
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/cpuinfo.h
@@ -0,0 +1,36 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_CPUINFO_H
+#define __ASM_OPENRISC_CPUINFO_H
+
+struct cpuinfo {
+	u32 clock_frequency;
+
+	u32 icache_size;
+	u32 icache_block_size;
+	u32 icache_ways;
+
+	u32 dcache_size;
+	u32 dcache_block_size;
+	u32 dcache_ways;
+};
+
+extern struct cpuinfo cpuinfo;
+
+#endif /* __ASM_OPENRISC_CPUINFO_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/delay.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/delay.h
new file mode 100644
index 0000000..17f8bf5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/delay.h
@@ -0,0 +1,24 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_DELAY_H
+#define __ASM_OPENRISC_DELAY_H
+
+#include <asm-generic/delay.h>
+
+extern unsigned long loops_per_jiffy;
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/dma-mapping.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/dma-mapping.h
new file mode 100644
index 0000000..e212a1f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/dma-mapping.h
@@ -0,0 +1,35 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_DMA_MAPPING_H
+#define __ASM_OPENRISC_DMA_MAPPING_H
+
+/*
+ * See Documentation/DMA-API-HOWTO.txt and
+ * Documentation/DMA-API.txt for documentation.
+ */
+
+#include <linux/dma-debug.h>
+#include <linux/dma-mapping.h>
+
+extern const struct dma_map_ops or1k_dma_map_ops;
+
+static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
+{
+	return &or1k_dma_map_ops;
+}
+
+#endif	/* __ASM_OPENRISC_DMA_MAPPING_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/elf.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/elf.h
new file mode 100644
index 0000000..d334e20
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/elf.h
@@ -0,0 +1,65 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __ASM_OPENRISC_ELF_H
+#define __ASM_OPENRISC_ELF_H
+
+
+#include <linux/types.h>
+#include <uapi/asm/elf.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+
+#define elf_check_arch(x) \
+	(((x)->e_machine == EM_OR32) || ((x)->e_machine == EM_OPENRISC))
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (0x08000000)
+
+/*
+ * Enable dump using regset.
+ * This covers all of general/DSP/FPU regs.
+ */
+#define CORE_DUMP_USE_REGSET
+
+#define ELF_EXEC_PAGESIZE	8192
+
+extern void dump_elf_thread(elf_greg_t *dest, struct pt_regs *pt);
+#define ELF_CORE_COPY_REGS(dest, regs) dump_elf_thread(dest, regs);
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This could be done in userspace,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM	(NULL)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/fixmap.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/fixmap.h
new file mode 100644
index 0000000..5a01595
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/fixmap.h
@@ -0,0 +1,88 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_FIXMAP_H
+#define __ASM_OPENRISC_FIXMAP_H
+
+/* Why exactly do we need 2 empty pages between the top of the fixed
+ * addresses and the top of virtual memory?  Something is using that
+ * memory space but not sure what right now... If you find it, leave
+ * a comment here.
+ */
+#define FIXADDR_TOP	((unsigned long) (-2*PAGE_SIZE))
+
+#include <linux/kernel.h>
+#include <linux/bug.h>
+#include <asm/page.h>
+
+/*
+ * On OpenRISC we use these special fixed_addresses for doing ioremap
+ * early in the boot process before memory initialization is complete.
+ * This is used, in particular, by the early serial console code.
+ *
+ * It's not really 'fixmap', per se, but fits loosely into the same
+ * paradigm.
+ */
+enum fixed_addresses {
+	/*
+	 * FIX_IOREMAP entries are useful for mapping physical address
+	 * space before ioremap() is useable, e.g. really early in boot
+	 * before kmalloc() is working.
+	 */
+#define FIX_N_IOREMAPS  32
+	FIX_IOREMAP_BEGIN,
+	FIX_IOREMAP_END = FIX_IOREMAP_BEGIN + FIX_N_IOREMAPS - 1,
+	__end_of_fixed_addresses
+};
+
+#define FIXADDR_SIZE		(__end_of_fixed_addresses << PAGE_SHIFT)
+/* FIXADDR_BOTTOM might be a better name here... */
+#define FIXADDR_START		(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static __always_inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		BUG();
+
+	return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/futex.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/futex.h
new file mode 100644
index 0000000..618da4a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/futex.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_OPENRISC_FUTEX_H
+#define __ASM_OPENRISC_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+({								\
+	__asm__ __volatile__ (					\
+		"1:	l.lwa	%0, %2			\n"	\
+			insn				"\n"	\
+		"2:	l.swa	%2, %1			\n"	\
+		"	l.bnf	1b			\n"	\
+		"	 l.ori	%1, r0, 0		\n"	\
+		"3:					\n"	\
+		".section .fixup,\"ax\"			\n"	\
+		"4:	l.j	3b			\n"	\
+		"	 l.addi	%1, r0, %3		\n"	\
+		".previous				\n"	\
+		".section __ex_table,\"a\"		\n"	\
+		".word	1b,4b,2b,4b			\n"	\
+		".previous				\n"	\
+		: "=&r" (oldval), "=&r" (ret), "+m" (*uaddr)	\
+		: "i" (-EFAULT), "r" (oparg)			\
+		: "cc", "memory"				\
+		);						\
+})
+
+static inline int
+arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)
+{
+	int oldval = 0, ret;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("l.or %1,%4,%4", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op("l.add %1,%0,%4", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("l.or %1,%0,%4", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("l.and %1,%0,%4", ret, oldval, uaddr, ~oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("l.xor %1,%0,%4", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret)
+		*oval = oldval;
+
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
+			      u32 oldval, u32 newval)
+{
+	int ret = 0;
+	u32 prev;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
+		return -EFAULT;
+
+	__asm__ __volatile__ (				\
+		"1:	l.lwa	%1, %2		\n"	\
+		"	l.sfeq	%1, %3		\n"	\
+		"	l.bnf	3f		\n"	\
+		"	 l.nop			\n"	\
+		"2:	l.swa	%2, %4		\n"	\
+		"	l.bnf	1b		\n"	\
+		"	 l.nop			\n"	\
+		"3:				\n"	\
+		".section .fixup,\"ax\"		\n"	\
+		"4:	l.j	3b		\n"	\
+		"	 l.addi	%0, r0, %5	\n"	\
+		".previous			\n"	\
+		".section __ex_table,\"a\"	\n"	\
+		".word	1b,4b,2b,4b		\n"	\
+		".previous			\n"	\
+		: "+r" (ret), "=&r" (prev), "+m" (*uaddr) \
+		: "r" (oldval), "r" (newval), "i" (-EFAULT) \
+		: "cc",	"memory"			\
+		);
+
+	*uval = prev;
+	return ret;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_OPENRISC_FUTEX_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/io.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/io.h
new file mode 100644
index 0000000..7c69139
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/io.h
@@ -0,0 +1,52 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_IO_H
+#define __ASM_OPENRISC_IO_H
+
+/*
+ * PCI: can we really do 0 here if we have no port IO?
+ */
+#define IO_SPACE_LIMIT		0
+
+/* OpenRISC has no port IO */
+#define HAVE_ARCH_PIO_SIZE	1
+#define PIO_RESERVED		0X0UL
+#define PIO_OFFSET		0
+#define PIO_MASK		0
+
+#include <asm-generic/io.h>
+#include <asm/pgtable.h>
+
+extern void __iomem *__ioremap(phys_addr_t offset, unsigned long size,
+				pgprot_t prot);
+
+static inline void __iomem *ioremap(phys_addr_t offset, unsigned long size)
+{
+	return __ioremap(offset, size, PAGE_KERNEL);
+}
+
+/* #define _PAGE_CI       0x002 */
+static inline void __iomem *ioremap_nocache(phys_addr_t offset,
+					     unsigned long size)
+{
+	return __ioremap(offset, size,
+			 __pgprot(pgprot_val(PAGE_KERNEL) | _PAGE_CI));
+}
+
+extern void iounmap(void *addr);
+#endif
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/irq.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/irq.h
new file mode 100644
index 0000000..d9eee0a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/irq.h
@@ -0,0 +1,29 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_IRQ_H__
+#define __ASM_OPENRISC_IRQ_H__
+
+#define	NR_IRQS		32
+#include <asm-generic/irq.h>
+
+#define NO_IRQ		(-1)
+
+extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
+
+#endif /* __ASM_OPENRISC_IRQ_H__ */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/irqflags.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/irqflags.h
new file mode 100644
index 0000000..dc86c65
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/irqflags.h
@@ -0,0 +1,29 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef ___ASM_OPENRISC_IRQFLAGS_H
+#define ___ASM_OPENRISC_IRQFLAGS_H
+
+#include <asm/spr_defs.h>
+
+#define ARCH_IRQ_DISABLED        0x00
+#define ARCH_IRQ_ENABLED         (SPR_SR_IEE|SPR_SR_TEE)
+
+#include <asm-generic/irqflags.h>
+
+#endif /* ___ASM_OPENRISC_IRQFLAGS_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/linkage.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/linkage.h
new file mode 100644
index 0000000..e263875
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/linkage.h
@@ -0,0 +1,25 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_LINKAGE_H
+#define __ASM_OPENRISC_LINKAGE_H
+
+#define __ALIGN      .align 0
+#define __ALIGN_STR ".align 0"
+
+#endif /* __ASM_OPENRISC_LINKAGE_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/mmu.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/mmu.h
new file mode 100644
index 0000000..d069bc2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/mmu.h
@@ -0,0 +1,26 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_MMU_H
+#define __ASM_OPENRISC_MMU_H
+
+#ifndef __ASSEMBLY__
+typedef unsigned long mm_context_t;
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/mmu_context.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/mmu_context.h
new file mode 100644
index 0000000..e94b814
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/mmu_context.h
@@ -0,0 +1,43 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_MMU_CONTEXT_H
+#define __ASM_OPENRISC_MMU_CONTEXT_H
+
+#include <asm-generic/mm_hooks.h>
+
+extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+extern void destroy_context(struct mm_struct *mm);
+extern void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+		      struct task_struct *tsk);
+
+#define deactivate_mm(tsk, mm)	do { } while (0)
+
+#define activate_mm(prev, next) switch_mm((prev), (next), NULL)
+
+/* current active pgd - this is similar to other processors pgd
+ * registers like cr3 on the i386
+ */
+
+extern volatile pgd_t *current_pgd;   /* defined in arch/openrisc/mm/fault.c */
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/page.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/page.h
new file mode 100644
index 0000000..35bcb7c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/page.h
@@ -0,0 +1,101 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_PAGE_H
+#define __ASM_OPENRISC_PAGE_H
+
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT      13
+#ifdef __ASSEMBLY__
+#define PAGE_SIZE       (1 << PAGE_SHIFT)
+#else
+#define PAGE_SIZE       (1UL << PAGE_SHIFT)
+#endif
+#define PAGE_MASK       (~(PAGE_SIZE-1))
+
+#define PAGE_OFFSET	0xc0000000
+#define KERNELBASE	PAGE_OFFSET
+
+/* This is not necessarily the right place for this, but it's needed by
+ * drivers/of/fdt.c
+ */
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+
+#define clear_page(page)	memset((page), 0, PAGE_SIZE)
+#define copy_page(to, from)	memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)        clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)     copy_page(to, from)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct {
+	unsigned long pte;
+} pte_t;
+typedef struct {
+	unsigned long pgd;
+} pgd_t;
+typedef struct {
+	unsigned long pgprot;
+} pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)	((x).pte)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) })
+#define __pgd(x)	((pgd_t) { (x) })
+#define __pgprot(x)	((pgprot_t) { (x) })
+
+#endif /* !__ASSEMBLY__ */
+
+
+#ifndef __ASSEMBLY__
+
+#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET))
+#define __pa(x) ((unsigned long) (x) - PAGE_OFFSET)
+
+#define virt_to_pfn(kaddr)      (__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn)        __va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(addr) \
+	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+
+#define page_to_phys(page)      ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+#define pfn_valid(pfn)          ((pfn) < max_mapnr)
+
+#define virt_addr_valid(kaddr)	(pfn_valid(virt_to_pfn(kaddr)))
+
+#endif /* __ASSEMBLY__ */
+
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
+
+#endif /* __ASM_OPENRISC_PAGE_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/pgalloc.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/pgalloc.h
new file mode 100644
index 0000000..3e1a466
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/pgalloc.h
@@ -0,0 +1,107 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_PGALLOC_H
+#define __ASM_OPENRISC_PGALLOC_H
+
+#include <asm/page.h>
+#include <linux/threads.h>
+#include <linux/mm.h>
+#include <linux/memblock.h>
+
+extern int mem_init_done;
+
+#define pmd_populate_kernel(mm, pmd, pte) \
+	set_pmd(pmd, __pmd(_KERNPG_TABLE + __pa(pte)))
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+				struct page *pte)
+{
+	set_pmd(pmd, __pmd(_KERNPG_TABLE +
+		     ((unsigned long)page_to_pfn(pte) <<
+		     (unsigned long) PAGE_SHIFT)));
+}
+
+/*
+ * Allocate and free page tables.
+ */
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *ret = (pgd_t *)__get_free_page(GFP_KERNEL);
+
+	if (ret) {
+		memset(ret, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
+		memcpy(ret + USER_PTRS_PER_PGD,
+		       swapper_pg_dir + USER_PTRS_PER_PGD,
+		       (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+
+	}
+	return ret;
+}
+
+#if 0
+/* FIXME: This seems to be the preferred style, but we are using
+ * current_pgd (from mm->pgd) to load kernel pages so we need it
+ * initialized.  This needs to be looked into.
+ */
+extern inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return (pgd_t *)get_zeroed_page(GFP_KERNEL);
+}
+#endif
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	free_page((unsigned long)pgd);
+}
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address);
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+					 unsigned long address)
+{
+	struct page *pte;
+	pte = alloc_pages(GFP_KERNEL, 0);
+	if (!pte)
+		return NULL;
+	clear_page(page_address(pte));
+	if (!pgtable_page_ctor(pte)) {
+		__free_page(pte);
+		return NULL;
+	}
+	return pte;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, struct page *pte)
+{
+	pgtable_page_dtor(pte);
+	__free_page(pte);
+}
+
+
+#define __pte_free_tlb(tlb, pte, addr) tlb_remove_page((tlb), (pte))
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+#define check_pgt_cache()          do { } while (0)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/pgtable.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/pgtable.h
new file mode 100644
index 0000000..71a6f08
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/pgtable.h
@@ -0,0 +1,454 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/* or32 pgtable.h - macros and functions to manipulate page tables
+ *
+ * Based on:
+ * include/asm-cris/pgtable.h
+ */
+
+#ifndef __ASM_OPENRISC_PGTABLE_H
+#define __ASM_OPENRISC_PGTABLE_H
+
+#define __ARCH_USE_5LEVEL_HACK
+#include <asm-generic/pgtable-nopmd.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/mmu.h>
+#include <asm/fixmap.h>
+
+/*
+ * The Linux memory management assumes a three-level page table setup. On
+ * or32, we use that, but "fold" the mid level into the top-level page
+ * table. Since the MMU TLB is software loaded through an interrupt, it
+ * supports any page table structure, so we could have used a three-level
+ * setup, but for the amounts of memory we normally use, a two-level is
+ * probably more efficient.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the or32 page table tree.
+ */
+
+extern void paging_init(void);
+
+/* Certain architectures need to do special things when pte's
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) ((*(pteptr)) = (pteval))
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+#define PGDIR_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-2))
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: we use a two-level, so
+ * we don't really have any PMD directory physically.
+ * pointers are 4 bytes so we can use the page size and
+ * divide it by 4 (shift by 2).
+ */
+#define PTRS_PER_PTE	(1UL << (PAGE_SHIFT-2))
+
+#define PTRS_PER_PGD	(1UL << (32-PGDIR_SHIFT))
+
+/* calculate how many PGD entries a user-level program can use
+ * the first mappable virtual address is 0
+ * (TASK_SIZE is the maximum virtual address space)
+ */
+
+#define USER_PTRS_PER_PGD       (TASK_SIZE/PGDIR_SIZE)
+#define FIRST_USER_ADDRESS      0UL
+
+/*
+ * Kernels own virtual memory area.
+ */
+
+/*
+ * The size and location of the vmalloc area are chosen so that modules
+ * placed in this area aren't more than a 28-bit signed offset from any
+ * kernel functions that they may need.  This greatly simplifies handling
+ * of the relocations for l.j and l.jal instructions as we don't need to
+ * introduce any trampolines for reaching "distant" code.
+ *
+ * 64 MB of vmalloc area is comparable to what's available on other arches.
+ */
+
+#define VMALLOC_START	(PAGE_OFFSET-0x04000000)
+#define VMALLOC_END	(PAGE_OFFSET)
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+
+/* Define some higher level generic page attributes.
+ *
+ * If you change _PAGE_CI definition be sure to change it in
+ * io.h for ioremap_nocache() too.
+ */
+
+/*
+ * An OR32 PTE looks like this:
+ *
+ * |  31 ... 10 |  9  |  8 ... 6  |  5  |  4  |  3  |  2  |  1  |  0  |
+ *  Phys pg.num    L     PP Index    D     A    WOM   WBC   CI    CC
+ *
+ *  L  : link
+ *  PPI: Page protection index
+ *  D  : Dirty
+ *  A  : Accessed
+ *  WOM: Weakly ordered memory
+ *  WBC: Write-back cache
+ *  CI : Cache inhibit
+ *  CC : Cache coherent
+ *
+ * The protection bits below should correspond to the layout of the actual
+ * PTE as per above
+ */
+
+#define _PAGE_CC       0x001 /* software: pte contains a translation */
+#define _PAGE_CI       0x002 /* cache inhibit          */
+#define _PAGE_WBC      0x004 /* write back cache       */
+#define _PAGE_WOM      0x008 /* weakly ordered memory  */
+
+#define _PAGE_A        0x010 /* accessed               */
+#define _PAGE_D        0x020 /* dirty                  */
+#define _PAGE_URE      0x040 /* user read enable       */
+#define _PAGE_UWE      0x080 /* user write enable      */
+
+#define _PAGE_SRE      0x100 /* superuser read enable  */
+#define _PAGE_SWE      0x200 /* superuser write enable */
+#define _PAGE_EXEC     0x400 /* software: page is executable */
+#define _PAGE_U_SHARED 0x800 /* software: page is shared in user space */
+
+/* 0x001 is cache coherency bit, which should always be set to
+ *       1 - for SMP (when we support it)
+ *       0 - otherwise
+ *
+ * we just reuse this bit in software for _PAGE_PRESENT and
+ * force it to 0 when loading it into TLB.
+ */
+#define _PAGE_PRESENT  _PAGE_CC
+#define _PAGE_USER     _PAGE_URE
+#define _PAGE_WRITE    (_PAGE_UWE | _PAGE_SWE)
+#define _PAGE_DIRTY    _PAGE_D
+#define _PAGE_ACCESSED _PAGE_A
+#define _PAGE_NO_CACHE _PAGE_CI
+#define _PAGE_SHARED   _PAGE_U_SHARED
+#define _PAGE_READ     (_PAGE_URE | _PAGE_SRE)
+
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_BASE     (_PAGE_PRESENT | _PAGE_ACCESSED)
+#define _PAGE_ALL      (_PAGE_PRESENT | _PAGE_ACCESSED)
+#define _KERNPG_TABLE \
+	(_PAGE_BASE | _PAGE_SRE | _PAGE_SWE | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define PAGE_NONE       __pgprot(_PAGE_ALL)
+#define PAGE_READONLY   __pgprot(_PAGE_ALL | _PAGE_URE | _PAGE_SRE)
+#define PAGE_READONLY_X __pgprot(_PAGE_ALL | _PAGE_URE | _PAGE_SRE | _PAGE_EXEC)
+#define PAGE_SHARED \
+	__pgprot(_PAGE_ALL | _PAGE_URE | _PAGE_SRE | _PAGE_UWE | _PAGE_SWE \
+		 | _PAGE_SHARED)
+#define PAGE_SHARED_X \
+	__pgprot(_PAGE_ALL | _PAGE_URE | _PAGE_SRE | _PAGE_UWE | _PAGE_SWE \
+		 | _PAGE_SHARED | _PAGE_EXEC)
+#define PAGE_COPY       __pgprot(_PAGE_ALL | _PAGE_URE | _PAGE_SRE)
+#define PAGE_COPY_X     __pgprot(_PAGE_ALL | _PAGE_URE | _PAGE_SRE | _PAGE_EXEC)
+
+#define PAGE_KERNEL \
+	__pgprot(_PAGE_ALL | _PAGE_SRE | _PAGE_SWE \
+		 | _PAGE_SHARED | _PAGE_DIRTY | _PAGE_EXEC)
+#define PAGE_KERNEL_RO \
+	__pgprot(_PAGE_ALL | _PAGE_SRE \
+		 | _PAGE_SHARED | _PAGE_DIRTY | _PAGE_EXEC)
+#define PAGE_KERNEL_NOCACHE \
+	__pgprot(_PAGE_ALL | _PAGE_SRE | _PAGE_SWE \
+		 | _PAGE_SHARED | _PAGE_DIRTY | _PAGE_EXEC | _PAGE_CI)
+
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY_X
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY_X
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY_X
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY_X
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY_X
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED_X
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY_X
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED_X
+
+/* zero page used for uninitialized stuff */
+extern unsigned long empty_zero_page[2048];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+/* number of bits that fit into a memory pointer */
+#define BITS_PER_PTR			(8*sizeof(unsigned long))
+
+/* to align the pointer to a pointer address */
+#define PTR_MASK			(~(sizeof(void *)-1))
+
+/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
+/* 64-bit machines, beware!  SRB. */
+#define SIZEOF_PTR_LOG2			2
+
+/* to find an entry in a page-table */
+#define PAGE_PTR(address) \
+((unsigned long)(address)>>(PAGE_SHIFT-SIZEOF_PTR_LOG2)&PTR_MASK&~PAGE_MASK)
+
+/* to set the page-dir */
+#define SET_PAGE_DIR(tsk, pgdir)
+
+#define pte_none(x)	(!pte_val(x))
+#define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm, addr, xp)	do { pte_val(*(xp)) = 0; } while (0)
+
+#define pmd_none(x)	(!pmd_val(x))
+#define	pmd_bad(x)	((pmd_val(x) & (~PAGE_MASK)) != _KERNPG_TABLE)
+#define pmd_present(x)	(pmd_val(x) & _PAGE_PRESENT)
+#define pmd_clear(xp)	do { pmd_val(*(xp)) = 0; } while (0)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+
+static inline int pte_read(pte_t pte)  { return pte_val(pte) & _PAGE_READ; }
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; }
+static inline int pte_exec(pte_t pte)  { return pte_val(pte) & _PAGE_EXEC; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_special(pte_t pte) { return 0; }
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_WRITE);
+	return pte;
+}
+
+static inline pte_t pte_rdprotect(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_READ);
+	return pte;
+}
+
+static inline pte_t pte_exprotect(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_EXEC);
+	return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_DIRTY);
+	return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_ACCESSED);
+	return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkread(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_READ;
+	return pte;
+}
+
+static inline pte_t pte_mkexec(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_EXEC;
+	return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_DIRTY;
+	return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_ACCESSED;
+	return pte;
+}
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+/* What actually goes as arguments to the various functions is less than
+ * obvious, but a rule of thumb is that struct page's goes as struct page *,
+ * really physical DRAM addresses are unsigned long's, and DRAM "virtual"
+ * addresses (the 0xc0xxxxxx's) goes as void *'s.
+ */
+
+static inline pte_t __mk_pte(void *page, pgprot_t pgprot)
+{
+	pte_t pte;
+	/* the PTE needs a physical address */
+	pte_val(pte) = __pa(page) | pgprot_val(pgprot);
+	return pte;
+}
+
+#define mk_pte(page, pgprot) __mk_pte(page_address(page), (pgprot))
+
+#define mk_pte_phys(physpage, pgprot) \
+({                                                                      \
+	pte_t __pte;                                                    \
+									\
+	pte_val(__pte) = (physpage) + pgprot_val(pgprot);               \
+	__pte;                                                          \
+})
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+	return pte;
+}
+
+
+/*
+ * pte_val refers to a page in the 0x0xxxxxxx physical DRAM interval
+ * __pte_page(pte_val) refers to the "virtual" DRAM interval
+ * pte_pagenr refers to the page-number counted starting from the virtual
+ * DRAM start
+ */
+
+static inline unsigned long __pte_page(pte_t pte)
+{
+	/* the PTE contains a physical address */
+	return (unsigned long)__va(pte_val(pte) & PAGE_MASK);
+}
+
+#define pte_pagenr(pte)         ((__pte_page(pte) - PAGE_OFFSET) >> PAGE_SHIFT)
+
+/* permanent address of a page */
+
+#define __page_address(page) (PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
+#define pte_page(pte)		(mem_map+pte_pagenr(pte))
+
+/*
+ * only the pte's themselves need to point to physical DRAM (see above)
+ * the pagetable links are purely handled within the kernel SW and thus
+ * don't need the __pa and __va transformations.
+ */
+static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
+{
+	pmd_val(*pmdp) = _KERNPG_TABLE | (unsigned long) ptep;
+}
+
+#define pmd_page(pmd)		(pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+#define pmd_page_kernel(pmd)    ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address)      ((address >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+
+#define __pgd_offset(address)   pgd_index(address)
+
+#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+#define __pmd_offset(address) \
+	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define __pte_offset(address)                   \
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address)         \
+	((pte_t *) pmd_page_kernel(*(dir)) +  __pte_offset(address))
+#define pte_offset_map(dir, address)	        \
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_offset_map_nested(dir, address)     \
+	pte_offset_map(dir, address)
+
+#define pte_unmap(pte)          do { } while (0)
+#define pte_unmap_nested(pte)   do { } while (0)
+#define pte_pfn(x)		((unsigned long)(((x).pte)) >> PAGE_SHIFT)
+#define pfn_pte(pfn, prot)  __pte((((pfn) << PAGE_SHIFT)) | pgprot_val(prot))
+
+#define pte_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pte %p(%08lx).\n", \
+	       __FILE__, __LINE__, &(e), pte_val(e))
+#define pgd_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pgd %p(%08lx).\n", \
+	       __FILE__, __LINE__, &(e), pgd_val(e))
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; /* defined in head.S */
+
+struct vm_area_struct;
+
+/*
+ * or32 doesn't have any external MMU info: the kernel page
+ * tables contain all the necessary information.
+ *
+ * Actually I am not sure on what this could be used for.
+ */
+static inline void update_mmu_cache(struct vm_area_struct *vma,
+	unsigned long address, pte_t *pte)
+{
+}
+
+/* __PHX__ FIXME, SWAP, this probably doesn't work */
+
+/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */
+/* Since the PAGE_PRESENT bit is bit 4, we can use the bits above */
+
+#define __swp_type(x)			(((x).val >> 5) & 0x7f)
+#define __swp_offset(x)			((x).val >> 12)
+#define __swp_entry(type, offset) \
+	((swp_entry_t) { ((type) << 5) | ((offset) << 12) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+#define kern_addr_valid(addr)           (1)
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()		do { } while (0)
+
+typedef pte_t *pte_addr_t;
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_OPENRISC_PGTABLE_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/processor.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/processor.h
new file mode 100644
index 0000000..396d8f3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/processor.h
@@ -0,0 +1,92 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_PROCESSOR_H
+#define __ASM_OPENRISC_PROCESSOR_H
+
+#include <asm/spr_defs.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+
+#define STACK_TOP       TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+/* Kernel and user SR register setting */
+#define KERNEL_SR (SPR_SR_DME | SPR_SR_IME | SPR_SR_ICE \
+		   | SPR_SR_DCE | SPR_SR_SM)
+#define USER_SR   (SPR_SR_DME | SPR_SR_IME | SPR_SR_ICE \
+		   | SPR_SR_DCE | SPR_SR_IEE | SPR_SR_TEE)
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l; })
+
+/*
+ * User space process size. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+
+#define TASK_SIZE       (0x80000000UL)
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE      (TASK_SIZE / 8 * 3)
+
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+
+struct thread_struct {
+};
+
+/*
+ * At user->kernel entry, the pt_regs struct is stacked on the top of the
+ * kernel-stack.  This macro allows us to find those regs for a task.
+ * Notice that subsequent pt_regs stackings, like recursive interrupts
+ * occurring while we're in the kernel, won't affect this - only the first
+ * user->kernel transition registers are reached by this (i.e. not regs
+ * for running signal handler)
+ */
+#define user_regs(thread_info)  (((struct pt_regs *)((unsigned long)(thread_info) + THREAD_SIZE - STACK_FRAME_OVERHEAD)) - 1)
+
+/*
+ * Dito but for the currently running task
+ */
+
+#define task_pt_regs(task) user_regs(task_thread_info(task))
+
+#define INIT_SP         (sizeof(init_stack) + (unsigned long) &init_stack)
+
+#define INIT_THREAD  { }
+
+
+#define KSTK_EIP(tsk)   (task_pt_regs(tsk)->pc)
+#define KSTK_ESP(tsk)   (task_pt_regs(tsk)->sp)
+
+
+void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp);
+void release_thread(struct task_struct *);
+unsigned long get_wchan(struct task_struct *p);
+
+#define init_stack      (init_thread_union.stack)
+
+#define cpu_relax()     barrier()
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_OPENRISC_PROCESSOR_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/ptrace.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/ptrace.h
new file mode 100644
index 0000000..6ca1726
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/ptrace.h
@@ -0,0 +1,124 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __ASM_OPENRISC_PTRACE_H
+#define __ASM_OPENRISC_PTRACE_H
+
+
+#include <asm/spr_defs.h>
+#include <uapi/asm/ptrace.h>
+
+/*
+ * Make kernel PTrace/register structures opaque to userspace... userspace can
+ * access thread state via the regset mechanism.  This allows us a bit of
+ * flexibility in how we order the registers on the stack, permitting some
+ * optimizations like packing call-clobbered registers together so that
+ * they share a cacheline (not done yet, though... future optimization).
+ */
+
+#ifndef __ASSEMBLY__
+/*
+ * This struct describes how the registers are laid out on the kernel stack
+ * during a syscall or other kernel entry.
+ *
+ * This structure should always be cacheline aligned on the stack.
+ * FIXME: I don't think that's the case right now.  The alignment is
+ * taken care of elsewhere... head.S, process.c, etc.
+ */
+
+struct pt_regs {
+	union {
+		struct {
+			/* Named registers */
+			long  sr;	/* Stored in place of r0 */
+			long  sp;	/* r1 */
+		};
+		struct {
+			/* Old style */
+			long offset[2];
+			long gprs[30];
+		};
+		struct {
+			/* New style */
+			long gpr[32];
+		};
+	};
+	long  pc;
+	/* For restarting system calls:
+	 * Set to syscall number for syscall exceptions,
+	 * -1 for all other exceptions.
+	 */
+	long  orig_gpr11;	/* For restarting system calls */
+	long dummy;		/* Cheap alignment fix */
+	long dummy2;		/* Cheap alignment fix */
+};
+
+/* TODO: Rename this to REDZONE because that's what it is */
+#define STACK_FRAME_OVERHEAD  128  /* size of minimum stack frame */
+
+#define instruction_pointer(regs)	((regs)->pc)
+#define user_mode(regs)			(((regs)->sr & SPR_SR_SM) == 0)
+#define user_stack_pointer(regs)	((unsigned long)(regs)->sp)
+#define profile_pc(regs)		instruction_pointer(regs)
+
+static inline long regs_return_value(struct pt_regs *regs)
+{
+	return regs->gpr[11];
+}
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ */
+#define PT_SR         0
+#define PT_SP         4
+#define PT_GPR2       8
+#define PT_GPR3       12
+#define PT_GPR4       16
+#define PT_GPR5       20
+#define PT_GPR6       24
+#define PT_GPR7       28
+#define PT_GPR8       32
+#define PT_GPR9       36
+#define PT_GPR10      40
+#define PT_GPR11      44
+#define PT_GPR12      48
+#define PT_GPR13      52
+#define PT_GPR14      56
+#define PT_GPR15      60
+#define PT_GPR16      64
+#define PT_GPR17      68
+#define PT_GPR18      72
+#define PT_GPR19      76
+#define PT_GPR20      80
+#define PT_GPR21      84
+#define PT_GPR22      88
+#define PT_GPR23      92
+#define PT_GPR24      96
+#define PT_GPR25      100
+#define PT_GPR26      104
+#define PT_GPR27      108
+#define PT_GPR28      112
+#define PT_GPR29      116
+#define PT_GPR30      120
+#define PT_GPR31      124
+#define PT_PC	      128
+#define PT_ORIG_GPR11 132
+#define PT_SYSCALLNO  136
+
+#endif /* __ASM_OPENRISC_PTRACE_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/serial.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/serial.h
new file mode 100644
index 0000000..270a452
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/serial.h
@@ -0,0 +1,36 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_SERIAL_H
+#define __ASM_OPENRISC_SERIAL_H
+
+#ifdef __KERNEL__
+
+#include <asm/cpuinfo.h>
+
+/* There's a generic version of this file, but it assumes a 1.8MHz UART clk...
+ * this, on the other hand, assumes the UART clock is tied to the system
+ * clock... 8250_early.c (early 8250 serial console) actually uses this, so
+ * it needs to be correct to get the early console working.
+ */
+
+#define BASE_BAUD (cpuinfo.clock_frequency/16)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_OPENRISC_SERIAL_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/spinlock.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/spinlock.h
new file mode 100644
index 0000000..fd00a3a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/spinlock.h
@@ -0,0 +1,24 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_SPINLOCK_H
+#define __ASM_OPENRISC_SPINLOCK_H
+
+#error "or32 doesn't do SMP yet"
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/spr.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/spr.h
new file mode 100644
index 0000000..1cccb42
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/spr.h
@@ -0,0 +1,42 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_SPR_H
+#define __ASM_OPENRISC_SPR_H
+
+#define mtspr(_spr, _val) __asm__ __volatile__ (		\
+	"l.mtspr r0,%1,%0"					\
+	: : "K" (_spr), "r" (_val))
+#define mtspr_off(_spr, _off, _val) __asm__ __volatile__ (	\
+	"l.mtspr %0,%1,%2"					\
+	: : "r" (_off), "r" (_val), "K" (_spr))
+
+static inline unsigned long mfspr(unsigned long add)
+{
+	unsigned long ret;
+	__asm__ __volatile__ ("l.mfspr %0,r0,%1" : "=r" (ret) : "K" (add));
+	return ret;
+}
+
+static inline unsigned long mfspr_off(unsigned long add, unsigned long offset)
+{
+	unsigned long ret;
+	__asm__ __volatile__ ("l.mfspr %0,%1,%2" : "=r" (ret)
+						 : "r" (offset), "K" (add));
+	return ret;
+}
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/spr_defs.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/spr_defs.h
new file mode 100644
index 0000000..367dac7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/spr_defs.h
@@ -0,0 +1,604 @@
+/*
+ * OpenRISC Linux
+ *
+ * SPR Definitions
+ *
+ * Copyright (C) 2000 Damjan Lampret
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2008, 2010 Embecosm Limited
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This file is part of OpenRISC 1000 Architectural Simulator.
+ */
+
+#ifndef SPR_DEFS__H
+#define SPR_DEFS__H
+
+/* Definition of special-purpose registers (SPRs). */
+
+#define MAX_GRPS (32)
+#define MAX_SPRS_PER_GRP_BITS (11)
+#define MAX_SPRS_PER_GRP (1 << MAX_SPRS_PER_GRP_BITS)
+#define MAX_SPRS (0x10000)
+
+/* Base addresses for the groups */
+#define SPRGROUP_SYS	(0 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_DMMU	(1 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_IMMU	(2 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_DC	(3 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_IC	(4 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_MAC	(5 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_D	(6 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_PC	(7 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_PM	(8 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_PIC	(9 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_TT	(10 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_FP	(11 << MAX_SPRS_PER_GRP_BITS)
+
+/* System control and status group */
+#define SPR_VR		(SPRGROUP_SYS + 0)
+#define SPR_UPR		(SPRGROUP_SYS + 1)
+#define SPR_CPUCFGR	(SPRGROUP_SYS + 2)
+#define SPR_DMMUCFGR	(SPRGROUP_SYS + 3)
+#define SPR_IMMUCFGR	(SPRGROUP_SYS + 4)
+#define SPR_DCCFGR	(SPRGROUP_SYS + 5)
+#define SPR_ICCFGR	(SPRGROUP_SYS + 6)
+#define SPR_DCFGR	(SPRGROUP_SYS + 7)
+#define SPR_PCCFGR	(SPRGROUP_SYS + 8)
+#define SPR_NPC         (SPRGROUP_SYS + 16)  /* CZ 21/06/01 */
+#define SPR_SR		(SPRGROUP_SYS + 17)  /* CZ 21/06/01 */
+#define SPR_PPC         (SPRGROUP_SYS + 18)  /* CZ 21/06/01 */
+#define SPR_FPCSR       (SPRGROUP_SYS + 20)  /* CZ 21/06/01 */
+#define SPR_EPCR_BASE	(SPRGROUP_SYS + 32)  /* CZ 21/06/01 */
+#define SPR_EPCR_LAST	(SPRGROUP_SYS + 47)  /* CZ 21/06/01 */
+#define SPR_EEAR_BASE	(SPRGROUP_SYS + 48)
+#define SPR_EEAR_LAST	(SPRGROUP_SYS + 63)
+#define SPR_ESR_BASE	(SPRGROUP_SYS + 64)
+#define SPR_ESR_LAST	(SPRGROUP_SYS + 79)
+#define SPR_GPR_BASE	(SPRGROUP_SYS + 1024)
+
+/* Data MMU group */
+#define SPR_DMMUCR	(SPRGROUP_DMMU + 0)
+#define SPR_DTLBEIR	(SPRGROUP_DMMU + 2)
+#define SPR_DTLBMR_BASE(WAY)	(SPRGROUP_DMMU + 0x200 + (WAY) * 0x100)
+#define SPR_DTLBMR_LAST(WAY)	(SPRGROUP_DMMU + 0x27f + (WAY) * 0x100)
+#define SPR_DTLBTR_BASE(WAY)	(SPRGROUP_DMMU + 0x280 + (WAY) * 0x100)
+#define SPR_DTLBTR_LAST(WAY)	(SPRGROUP_DMMU + 0x2ff + (WAY) * 0x100)
+
+/* Instruction MMU group */
+#define SPR_IMMUCR	(SPRGROUP_IMMU + 0)
+#define SPR_ITLBEIR	(SPRGROUP_IMMU + 2)
+#define SPR_ITLBMR_BASE(WAY)	(SPRGROUP_IMMU + 0x200 + (WAY) * 0x100)
+#define SPR_ITLBMR_LAST(WAY)	(SPRGROUP_IMMU + 0x27f + (WAY) * 0x100)
+#define SPR_ITLBTR_BASE(WAY)	(SPRGROUP_IMMU + 0x280 + (WAY) * 0x100)
+#define SPR_ITLBTR_LAST(WAY)	(SPRGROUP_IMMU + 0x2ff + (WAY) * 0x100)
+
+/* Data cache group */
+#define SPR_DCCR	(SPRGROUP_DC + 0)
+#define SPR_DCBPR	(SPRGROUP_DC + 1)
+#define SPR_DCBFR	(SPRGROUP_DC + 2)
+#define SPR_DCBIR	(SPRGROUP_DC + 3)
+#define SPR_DCBWR	(SPRGROUP_DC + 4)
+#define SPR_DCBLR	(SPRGROUP_DC + 5)
+#define SPR_DCR_BASE(WAY)	(SPRGROUP_DC + 0x200 + (WAY) * 0x200)
+#define SPR_DCR_LAST(WAY)	(SPRGROUP_DC + 0x3ff + (WAY) * 0x200)
+
+/* Instruction cache group */
+#define SPR_ICCR	(SPRGROUP_IC + 0)
+#define SPR_ICBPR	(SPRGROUP_IC + 1)
+#define SPR_ICBIR	(SPRGROUP_IC + 2)
+#define SPR_ICBLR	(SPRGROUP_IC + 3)
+#define SPR_ICR_BASE(WAY)	(SPRGROUP_IC + 0x200 + (WAY) * 0x200)
+#define SPR_ICR_LAST(WAY)	(SPRGROUP_IC + 0x3ff + (WAY) * 0x200)
+
+/* MAC group */
+#define SPR_MACLO	(SPRGROUP_MAC + 1)
+#define SPR_MACHI	(SPRGROUP_MAC + 2)
+
+/* Debug group */
+#define SPR_DVR(N)	(SPRGROUP_D + (N))
+#define SPR_DCR(N)	(SPRGROUP_D + 8 + (N))
+#define SPR_DMR1	(SPRGROUP_D + 16)
+#define SPR_DMR2	(SPRGROUP_D + 17)
+#define SPR_DWCR0	(SPRGROUP_D + 18)
+#define SPR_DWCR1	(SPRGROUP_D + 19)
+#define SPR_DSR		(SPRGROUP_D + 20)
+#define SPR_DRR		(SPRGROUP_D + 21)
+
+/* Performance counters group */
+#define SPR_PCCR(N)	(SPRGROUP_PC + (N))
+#define SPR_PCMR(N)	(SPRGROUP_PC + 8 + (N))
+
+/* Power management group */
+#define SPR_PMR (SPRGROUP_PM + 0)
+
+/* PIC group */
+#define SPR_PICMR (SPRGROUP_PIC + 0)
+#define SPR_PICPR (SPRGROUP_PIC + 1)
+#define SPR_PICSR (SPRGROUP_PIC + 2)
+
+/* Tick Timer group */
+#define SPR_TTMR (SPRGROUP_TT + 0)
+#define SPR_TTCR (SPRGROUP_TT + 1)
+
+/*
+ * Bit definitions for the Version Register
+ *
+ */
+#define SPR_VR_VER	0xff000000  /* Processor version */
+#define SPR_VR_CFG	0x00ff0000  /* Processor configuration */
+#define SPR_VR_RES	0x0000ffc0  /* Reserved */
+#define SPR_VR_REV	0x0000003f  /* Processor revision */
+
+#define SPR_VR_VER_OFF	24
+#define SPR_VR_CFG_OFF	16
+#define SPR_VR_REV_OFF	0
+
+/*
+ * Bit definitions for the Unit Present Register
+ *
+ */
+#define SPR_UPR_UP	   0x00000001  /* UPR present */
+#define SPR_UPR_DCP	   0x00000002  /* Data cache present */
+#define SPR_UPR_ICP	   0x00000004  /* Instruction cache present */
+#define SPR_UPR_DMP	   0x00000008  /* Data MMU present */
+#define SPR_UPR_IMP	   0x00000010  /* Instruction MMU present */
+#define SPR_UPR_MP	   0x00000020  /* MAC present */
+#define SPR_UPR_DUP	   0x00000040  /* Debug unit present */
+#define SPR_UPR_PCUP	   0x00000080  /* Performance counters unit present */
+#define SPR_UPR_PICP	   0x00000100  /* PIC present */
+#define SPR_UPR_PMP	   0x00000200  /* Power management present */
+#define SPR_UPR_TTP	   0x00000400  /* Tick timer present */
+#define SPR_UPR_RES	   0x00fe0000  /* Reserved */
+#define SPR_UPR_CUP	   0xff000000  /* Context units present */
+
+/*
+ * JPB: Bit definitions for the CPU configuration register
+ *
+ */
+#define SPR_CPUCFGR_NSGF   0x0000000f  /* Number of shadow GPR files */
+#define SPR_CPUCFGR_CGF	   0x00000010  /* Custom GPR file */
+#define SPR_CPUCFGR_OB32S  0x00000020  /* ORBIS32 supported */
+#define SPR_CPUCFGR_OB64S  0x00000040  /* ORBIS64 supported */
+#define SPR_CPUCFGR_OF32S  0x00000080  /* ORFPX32 supported */
+#define SPR_CPUCFGR_OF64S  0x00000100  /* ORFPX64 supported */
+#define SPR_CPUCFGR_OV64S  0x00000200  /* ORVDX64 supported */
+#define SPR_CPUCFGR_RES	   0xfffffc00  /* Reserved */
+
+/*
+ * JPB: Bit definitions for the Debug configuration register and other
+ * constants.
+ *
+ */
+
+#define SPR_DCFGR_NDP      0x00000007  /* Number of matchpoints mask */
+#define SPR_DCFGR_NDP1     0x00000000  /* One matchpoint supported */
+#define SPR_DCFGR_NDP2     0x00000001  /* Two matchpoints supported */
+#define SPR_DCFGR_NDP3     0x00000002  /* Three matchpoints supported */
+#define SPR_DCFGR_NDP4     0x00000003  /* Four matchpoints supported */
+#define SPR_DCFGR_NDP5     0x00000004  /* Five matchpoints supported */
+#define SPR_DCFGR_NDP6     0x00000005  /* Six matchpoints supported */
+#define SPR_DCFGR_NDP7     0x00000006  /* Seven matchpoints supported */
+#define SPR_DCFGR_NDP8     0x00000007  /* Eight matchpoints supported */
+#define SPR_DCFGR_WPCI     0x00000008  /* Watchpoint counters implemented */
+
+#define MATCHPOINTS_TO_NDP(n) (1 == n ? SPR_DCFGR_NDP1 : \
+                               2 == n ? SPR_DCFGR_NDP2 : \
+                               3 == n ? SPR_DCFGR_NDP3 : \
+                               4 == n ? SPR_DCFGR_NDP4 : \
+                               5 == n ? SPR_DCFGR_NDP5 : \
+                               6 == n ? SPR_DCFGR_NDP6 : \
+                               7 == n ? SPR_DCFGR_NDP7 : SPR_DCFGR_NDP8)
+#define MAX_MATCHPOINTS  8
+#define MAX_WATCHPOINTS  (MAX_MATCHPOINTS + 2)
+
+/*
+ * Bit definitions for the Supervision Register
+ *
+ */
+#define SPR_SR_SM          0x00000001  /* Supervisor Mode */
+#define SPR_SR_TEE         0x00000002  /* Tick timer Exception Enable */
+#define SPR_SR_IEE         0x00000004  /* Interrupt Exception Enable */
+#define SPR_SR_DCE         0x00000008  /* Data Cache Enable */
+#define SPR_SR_ICE         0x00000010  /* Instruction Cache Enable */
+#define SPR_SR_DME         0x00000020  /* Data MMU Enable */
+#define SPR_SR_IME         0x00000040  /* Instruction MMU Enable */
+#define SPR_SR_LEE         0x00000080  /* Little Endian Enable */
+#define SPR_SR_CE          0x00000100  /* CID Enable */
+#define SPR_SR_F           0x00000200  /* Condition Flag */
+#define SPR_SR_CY          0x00000400  /* Carry flag */
+#define SPR_SR_OV          0x00000800  /* Overflow flag */
+#define SPR_SR_OVE         0x00001000  /* Overflow flag Exception */
+#define SPR_SR_DSX         0x00002000  /* Delay Slot Exception */
+#define SPR_SR_EPH         0x00004000  /* Exception Prefix High */
+#define SPR_SR_FO          0x00008000  /* Fixed one */
+#define SPR_SR_SUMRA       0x00010000  /* Supervisor SPR read access */
+#define SPR_SR_RES         0x0ffe0000  /* Reserved */
+#define SPR_SR_CID         0xf0000000  /* Context ID */
+
+/*
+ * Bit definitions for the Data MMU Control Register
+ *
+ */
+#define SPR_DMMUCR_P2S	   0x0000003e  /* Level 2 Page Size */
+#define SPR_DMMUCR_P1S	   0x000007c0  /* Level 1 Page Size */
+#define SPR_DMMUCR_VADDR_WIDTH	0x0000f800  /* Virtual ADDR Width */
+#define SPR_DMMUCR_PADDR_WIDTH	0x000f0000  /* Physical ADDR Width */
+
+/*
+ * Bit definitions for the Instruction MMU Control Register
+ *
+ */
+#define SPR_IMMUCR_P2S	   0x0000003e  /* Level 2 Page Size */
+#define SPR_IMMUCR_P1S	   0x000007c0  /* Level 1 Page Size */
+#define SPR_IMMUCR_VADDR_WIDTH	0x0000f800  /* Virtual ADDR Width */
+#define SPR_IMMUCR_PADDR_WIDTH	0x000f0000  /* Physical ADDR Width */
+
+/*
+ * Bit definitions for the Data TLB Match Register
+ *
+ */
+#define SPR_DTLBMR_V	   0x00000001  /* Valid */
+#define SPR_DTLBMR_PL1	   0x00000002  /* Page Level 1 (if 0 then PL2) */
+#define SPR_DTLBMR_CID	   0x0000003c  /* Context ID */
+#define SPR_DTLBMR_LRU	   0x000000c0  /* Least Recently Used */
+#define SPR_DTLBMR_VPN	   0xfffff000  /* Virtual Page Number */
+
+/*
+ * Bit definitions for the Data TLB Translate Register
+ *
+ */
+#define SPR_DTLBTR_CC	   0x00000001  /* Cache Coherency */
+#define SPR_DTLBTR_CI	   0x00000002  /* Cache Inhibit */
+#define SPR_DTLBTR_WBC	   0x00000004  /* Write-Back Cache */
+#define SPR_DTLBTR_WOM	   0x00000008  /* Weakly-Ordered Memory */
+#define SPR_DTLBTR_A	   0x00000010  /* Accessed */
+#define SPR_DTLBTR_D	   0x00000020  /* Dirty */
+#define SPR_DTLBTR_URE	   0x00000040  /* User Read Enable */
+#define SPR_DTLBTR_UWE	   0x00000080  /* User Write Enable */
+#define SPR_DTLBTR_SRE	   0x00000100  /* Supervisor Read Enable */
+#define SPR_DTLBTR_SWE	   0x00000200  /* Supervisor Write Enable */
+#define SPR_DTLBTR_PPN	   0xfffff000  /* Physical Page Number */
+
+/*
+ * Bit definitions for the Instruction TLB Match Register
+ *
+ */
+#define SPR_ITLBMR_V	   0x00000001  /* Valid */
+#define SPR_ITLBMR_PL1	   0x00000002  /* Page Level 1 (if 0 then PL2) */
+#define SPR_ITLBMR_CID	   0x0000003c  /* Context ID */
+#define SPR_ITLBMR_LRU	   0x000000c0  /* Least Recently Used */
+#define SPR_ITLBMR_VPN	   0xfffff000  /* Virtual Page Number */
+
+/*
+ * Bit definitions for the Instruction TLB Translate Register
+ *
+ */
+#define SPR_ITLBTR_CC	   0x00000001  /* Cache Coherency */
+#define SPR_ITLBTR_CI	   0x00000002  /* Cache Inhibit */
+#define SPR_ITLBTR_WBC	   0x00000004  /* Write-Back Cache */
+#define SPR_ITLBTR_WOM	   0x00000008  /* Weakly-Ordered Memory */
+#define SPR_ITLBTR_A	   0x00000010  /* Accessed */
+#define SPR_ITLBTR_D	   0x00000020  /* Dirty */
+#define SPR_ITLBTR_SXE	   0x00000040  /* User Read Enable */
+#define SPR_ITLBTR_UXE	   0x00000080  /* User Write Enable */
+#define SPR_ITLBTR_PPN	   0xfffff000  /* Physical Page Number */
+
+/*
+ * Bit definitions for Data Cache Control register
+ *
+ */
+#define SPR_DCCR_EW	   0x000000ff  /* Enable ways */
+
+/*
+ * Bit definitions for Insn Cache Control register
+ *
+ */
+#define SPR_ICCR_EW	   0x000000ff  /* Enable ways */
+
+/*
+ * Bit definitions for Data Cache Configuration Register
+ *
+ */
+
+#define SPR_DCCFGR_NCW		0x00000007
+#define SPR_DCCFGR_NCS		0x00000078
+#define SPR_DCCFGR_CBS		0x00000080
+#define SPR_DCCFGR_CWS		0x00000100
+#define SPR_DCCFGR_CCRI		0x00000200
+#define SPR_DCCFGR_CBIRI	0x00000400
+#define SPR_DCCFGR_CBPRI	0x00000800
+#define SPR_DCCFGR_CBLRI	0x00001000
+#define SPR_DCCFGR_CBFRI	0x00002000
+#define SPR_DCCFGR_CBWBRI	0x00004000
+
+#define SPR_DCCFGR_NCW_OFF      0
+#define SPR_DCCFGR_NCS_OFF      3
+#define SPR_DCCFGR_CBS_OFF	7
+
+/*
+ * Bit definitions for Instruction Cache Configuration Register
+ *
+ */
+#define SPR_ICCFGR_NCW		0x00000007
+#define SPR_ICCFGR_NCS		0x00000078
+#define SPR_ICCFGR_CBS		0x00000080
+#define SPR_ICCFGR_CCRI		0x00000200
+#define SPR_ICCFGR_CBIRI	0x00000400
+#define SPR_ICCFGR_CBPRI	0x00000800
+#define SPR_ICCFGR_CBLRI	0x00001000
+
+#define SPR_ICCFGR_NCW_OFF      0
+#define SPR_ICCFGR_NCS_OFF      3
+#define SPR_ICCFGR_CBS_OFF	7
+
+/*
+ * Bit definitions for Data MMU Configuration Register
+ *
+ */
+
+#define SPR_DMMUCFGR_NTW	0x00000003
+#define SPR_DMMUCFGR_NTS	0x0000001C
+#define SPR_DMMUCFGR_NAE	0x000000E0
+#define SPR_DMMUCFGR_CRI	0x00000100
+#define SPR_DMMUCFGR_PRI        0x00000200
+#define SPR_DMMUCFGR_TEIRI	0x00000400
+#define SPR_DMMUCFGR_HTR	0x00000800
+
+#define SPR_DMMUCFGR_NTW_OFF	0
+#define SPR_DMMUCFGR_NTS_OFF	2
+
+/*
+ * Bit definitions for Instruction MMU Configuration Register
+ *
+ */
+
+#define SPR_IMMUCFGR_NTW	0x00000003
+#define SPR_IMMUCFGR_NTS	0x0000001C
+#define SPR_IMMUCFGR_NAE	0x000000E0
+#define SPR_IMMUCFGR_CRI	0x00000100
+#define SPR_IMMUCFGR_PRI	0x00000200
+#define SPR_IMMUCFGR_TEIRI	0x00000400
+#define SPR_IMMUCFGR_HTR	0x00000800
+
+#define SPR_IMMUCFGR_NTW_OFF	0
+#define SPR_IMMUCFGR_NTS_OFF	2
+
+/*
+ * Bit definitions for Debug Control registers
+ *
+ */
+#define SPR_DCR_DP	0x00000001  /* DVR/DCR present */
+#define SPR_DCR_CC	0x0000000e  /* Compare condition */
+#define SPR_DCR_SC	0x00000010  /* Signed compare */
+#define SPR_DCR_CT	0x000000e0  /* Compare to */
+
+/* Bit results with SPR_DCR_CC mask */
+#define SPR_DCR_CC_MASKED 0x00000000
+#define SPR_DCR_CC_EQUAL  0x00000002
+#define SPR_DCR_CC_LESS   0x00000004
+#define SPR_DCR_CC_LESSE  0x00000006
+#define SPR_DCR_CC_GREAT  0x00000008
+#define SPR_DCR_CC_GREATE 0x0000000a
+#define SPR_DCR_CC_NEQUAL 0x0000000c
+
+/* Bit results with SPR_DCR_CT mask */
+#define SPR_DCR_CT_DISABLED 0x00000000
+#define SPR_DCR_CT_IFEA     0x00000020
+#define SPR_DCR_CT_LEA      0x00000040
+#define SPR_DCR_CT_SEA      0x00000060
+#define SPR_DCR_CT_LD       0x00000080
+#define SPR_DCR_CT_SD       0x000000a0
+#define SPR_DCR_CT_LSEA     0x000000c0
+#define SPR_DCR_CT_LSD	    0x000000e0
+/* SPR_DCR_CT_LSD doesn't seem to be implemented anywhere in or1ksim. 2004-1-30 HP */
+
+/*
+ * Bit definitions for Debug Mode 1 register
+ *
+ */
+#define SPR_DMR1_CW       0x000fffff  /* Chain register pair data */
+#define SPR_DMR1_CW0_AND  0x00000001
+#define SPR_DMR1_CW0_OR   0x00000002
+#define SPR_DMR1_CW0      (SPR_DMR1_CW0_AND | SPR_DMR1_CW0_OR)
+#define SPR_DMR1_CW1_AND  0x00000004
+#define SPR_DMR1_CW1_OR   0x00000008
+#define SPR_DMR1_CW1      (SPR_DMR1_CW1_AND | SPR_DMR1_CW1_OR)
+#define SPR_DMR1_CW2_AND  0x00000010
+#define SPR_DMR1_CW2_OR   0x00000020
+#define SPR_DMR1_CW2      (SPR_DMR1_CW2_AND | SPR_DMR1_CW2_OR)
+#define SPR_DMR1_CW3_AND  0x00000040
+#define SPR_DMR1_CW3_OR   0x00000080
+#define SPR_DMR1_CW3      (SPR_DMR1_CW3_AND | SPR_DMR1_CW3_OR)
+#define SPR_DMR1_CW4_AND  0x00000100
+#define SPR_DMR1_CW4_OR   0x00000200
+#define SPR_DMR1_CW4      (SPR_DMR1_CW4_AND | SPR_DMR1_CW4_OR)
+#define SPR_DMR1_CW5_AND  0x00000400
+#define SPR_DMR1_CW5_OR   0x00000800
+#define SPR_DMR1_CW5      (SPR_DMR1_CW5_AND | SPR_DMR1_CW5_OR)
+#define SPR_DMR1_CW6_AND  0x00001000
+#define SPR_DMR1_CW6_OR   0x00002000
+#define SPR_DMR1_CW6      (SPR_DMR1_CW6_AND | SPR_DMR1_CW6_OR)
+#define SPR_DMR1_CW7_AND  0x00004000
+#define SPR_DMR1_CW7_OR   0x00008000
+#define SPR_DMR1_CW7      (SPR_DMR1_CW7_AND | SPR_DMR1_CW7_OR)
+#define SPR_DMR1_CW8_AND  0x00010000
+#define SPR_DMR1_CW8_OR   0x00020000
+#define SPR_DMR1_CW8      (SPR_DMR1_CW8_AND | SPR_DMR1_CW8_OR)
+#define SPR_DMR1_CW9_AND  0x00040000
+#define SPR_DMR1_CW9_OR   0x00080000
+#define SPR_DMR1_CW9      (SPR_DMR1_CW9_AND | SPR_DMR1_CW9_OR)
+#define SPR_DMR1_RES1      0x00300000  /* Reserved */
+#define SPR_DMR1_ST	  0x00400000  /* Single-step trace*/
+#define SPR_DMR1_BT	  0x00800000  /* Branch trace */
+#define SPR_DMR1_RES2	  0xff000000  /* Reserved */
+
+/*
+ * Bit definitions for Debug Mode 2 register. AWTC and WGB corrected by JPB
+ *
+ */
+#define SPR_DMR2_WCE0	   0x00000001  /* Watchpoint counter 0 enable */
+#define SPR_DMR2_WCE1	   0x00000002  /* Watchpoint counter 0 enable */
+#define SPR_DMR2_AWTC	   0x00000ffc  /* Assign watchpoints to counters */
+#define SPR_DMR2_AWTC_OFF           2  /* Bit offset to AWTC field */
+#define SPR_DMR2_WGB	   0x003ff000  /* Watchpoints generating breakpoint */
+#define SPR_DMR2_WGB_OFF           12  /* Bit offset to WGB field */
+#define SPR_DMR2_WBS	   0xffc00000  /* JPB: Watchpoint status */
+#define SPR_DMR2_WBS_OFF           22  /* Bit offset to WBS field */
+
+/*
+ * Bit definitions for Debug watchpoint counter registers
+ *
+ */
+#define SPR_DWCR_COUNT	    0x0000ffff  /* Count */
+#define SPR_DWCR_MATCH	    0xffff0000  /* Match */
+#define SPR_DWCR_MATCH_OFF          16  /* Match bit offset */
+
+/*
+ * Bit definitions for Debug stop register
+ *
+ */
+#define SPR_DSR_RSTE	0x00000001  /* Reset exception */
+#define SPR_DSR_BUSEE	0x00000002  /* Bus error exception */
+#define SPR_DSR_DPFE	0x00000004  /* Data Page Fault exception */
+#define SPR_DSR_IPFE	0x00000008  /* Insn Page Fault exception */
+#define SPR_DSR_TTE	0x00000010  /* Tick Timer exception */
+#define SPR_DSR_AE	0x00000020  /* Alignment exception */
+#define SPR_DSR_IIE	0x00000040  /* Illegal Instruction exception */
+#define SPR_DSR_IE	0x00000080  /* Interrupt exception */
+#define SPR_DSR_DME	0x00000100  /* DTLB miss exception */
+#define SPR_DSR_IME	0x00000200  /* ITLB miss exception */
+#define SPR_DSR_RE	0x00000400  /* Range exception */
+#define SPR_DSR_SCE	0x00000800  /* System call exception */
+#define SPR_DSR_FPE     0x00001000  /* Floating Point Exception */
+#define SPR_DSR_TE	0x00002000  /* Trap exception */
+
+/*
+ * Bit definitions for Debug reason register
+ *
+ */
+#define SPR_DRR_RSTE	0x00000001  /* Reset exception */
+#define SPR_DRR_BUSEE	0x00000002  /* Bus error exception */
+#define SPR_DRR_DPFE	0x00000004  /* Data Page Fault exception */
+#define SPR_DRR_IPFE	0x00000008  /* Insn Page Fault exception */
+#define SPR_DRR_TTE	0x00000010  /* Tick Timer exception */
+#define SPR_DRR_AE	0x00000020  /* Alignment exception */
+#define SPR_DRR_IIE	0x00000040  /* Illegal Instruction exception */
+#define SPR_DRR_IE	0x00000080  /* Interrupt exception */
+#define SPR_DRR_DME	0x00000100  /* DTLB miss exception */
+#define SPR_DRR_IME	0x00000200  /* ITLB miss exception */
+#define SPR_DRR_RE	0x00000400  /* Range exception */
+#define SPR_DRR_SCE	0x00000800  /* System call exception */
+#define SPR_DRR_FPE     0x00001000  /* Floating Point Exception */
+#define SPR_DRR_TE	0x00002000  /* Trap exception */
+
+/*
+ * Bit definitions for Performance counters mode registers
+ *
+ */
+#define SPR_PCMR_CP	0x00000001  /* Counter present */
+#define SPR_PCMR_UMRA	0x00000002  /* User mode read access */
+#define SPR_PCMR_CISM	0x00000004  /* Count in supervisor mode */
+#define SPR_PCMR_CIUM	0x00000008  /* Count in user mode */
+#define SPR_PCMR_LA	0x00000010  /* Load access event */
+#define SPR_PCMR_SA	0x00000020  /* Store access event */
+#define SPR_PCMR_IF	0x00000040  /* Instruction fetch event*/
+#define SPR_PCMR_DCM	0x00000080  /* Data cache miss event */
+#define SPR_PCMR_ICM	0x00000100  /* Insn cache miss event */
+#define SPR_PCMR_IFS	0x00000200  /* Insn fetch stall event */
+#define SPR_PCMR_LSUS	0x00000400  /* LSU stall event */
+#define SPR_PCMR_BS	0x00000800  /* Branch stall event */
+#define SPR_PCMR_DTLBM	0x00001000  /* DTLB miss event */
+#define SPR_PCMR_ITLBM	0x00002000  /* ITLB miss event */
+#define SPR_PCMR_DDS	0x00004000  /* Data dependency stall event */
+#define SPR_PCMR_WPE	0x03ff8000  /* Watchpoint events */
+
+/*
+ * Bit definitions for the Power management register
+ *
+ */
+#define SPR_PMR_SDF	0x0000000f  /* Slow down factor */
+#define SPR_PMR_DME	0x00000010  /* Doze mode enable */
+#define SPR_PMR_SME	0x00000020  /* Sleep mode enable */
+#define SPR_PMR_DCGE	0x00000040  /* Dynamic clock gating enable */
+#define SPR_PMR_SUME	0x00000080  /* Suspend mode enable */
+
+/*
+ * Bit definitions for PICMR
+ *
+ */
+#define SPR_PICMR_IUM	0xfffffffc  /* Interrupt unmask */
+
+/*
+ * Bit definitions for PICPR
+ *
+ */
+#define SPR_PICPR_IPRIO	0xfffffffc  /* Interrupt priority */
+
+/*
+ * Bit definitions for PICSR
+ *
+ */
+#define SPR_PICSR_IS	0xffffffff  /* Interrupt status */
+
+/*
+ * Bit definitions for Tick Timer Control Register
+ *
+ */
+
+#define SPR_TTCR_CNT	0xffffffff  /* Count, time period */
+#define SPR_TTMR_TP	0x0fffffff  /* Time period */
+#define SPR_TTMR_IP	0x10000000  /* Interrupt Pending */
+#define SPR_TTMR_IE	0x20000000  /* Interrupt Enable */
+#define SPR_TTMR_DI	0x00000000  /* Disabled */
+#define SPR_TTMR_RT	0x40000000  /* Restart tick */
+#define SPR_TTMR_SR     0x80000000  /* Single run */
+#define SPR_TTMR_CR     0xc0000000  /* Continuous run */
+#define SPR_TTMR_M      0xc0000000  /* Tick mode */
+
+/*
+ * Bit definitions for the FP Control Status Register
+ *
+ */
+#define SPR_FPCSR_FPEE  0x00000001  /* Floating Point Exception Enable */
+#define SPR_FPCSR_RM    0x00000006  /* Rounding Mode */
+#define SPR_FPCSR_OVF   0x00000008  /* Overflow Flag */
+#define SPR_FPCSR_UNF   0x00000010  /* Underflow Flag */
+#define SPR_FPCSR_SNF   0x00000020  /* SNAN Flag */
+#define SPR_FPCSR_QNF   0x00000040  /* QNAN Flag */
+#define SPR_FPCSR_ZF    0x00000080  /* Zero Flag */
+#define SPR_FPCSR_IXF   0x00000100  /* Inexact Flag */
+#define SPR_FPCSR_IVF   0x00000200  /* Invalid Flag */
+#define SPR_FPCSR_INF   0x00000400  /* Infinity Flag */
+#define SPR_FPCSR_DZF   0x00000800  /* Divide By Zero Flag */
+#define SPR_FPCSR_ALLF (SPR_FPCSR_OVF | SPR_FPCSR_UNF | SPR_FPCSR_SNF | \
+			SPR_FPCSR_QNF | SPR_FPCSR_ZF | SPR_FPCSR_IXF |  \
+			SPR_FPCSR_IVF | SPR_FPCSR_INF | SPR_FPCSR_DZF)
+
+#define FPCSR_RM_RN (0<<1)
+#define FPCSR_RM_RZ (1<<1)
+#define FPCSR_RM_RIP (2<<1)
+#define FPCSR_RM_RIN (3<<1)
+
+/*
+ * l.nop constants
+ *
+ */
+#define NOP_NOP          0x0000      /* Normal nop instruction */
+#define NOP_EXIT         0x0001      /* End of simulation */
+#define NOP_REPORT       0x0002      /* Simple report */
+/*#define NOP_PRINTF       0x0003       Simprintf instruction (obsolete)*/
+#define NOP_PUTC         0x0004      /* JPB: Simputc instruction */
+#define NOP_CNT_RESET    0x0005	     /* Reset statistics counters */
+#define NOP_GET_TICKS    0x0006	     /* JPB: Get # ticks running */
+#define NOP_GET_PS       0x0007      /* JPB: Get picosecs/cycle */
+#define NOP_REPORT_FIRST 0x0400      /* Report with number */
+#define NOP_REPORT_LAST  0x03ff      /* Report with number */
+
+#endif	/* SPR_DEFS__H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/string.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/string.h
new file mode 100644
index 0000000..69b9754
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/string.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_OPENRISC_STRING_H
+#define __ASM_OPENRISC_STRING_H
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *s, int c, __kernel_size_t n);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *dest, __const void *src, __kernel_size_t n);
+
+#endif /* __ASM_OPENRISC_STRING_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/syscall.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/syscall.h
new file mode 100644
index 0000000..2db9f1c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/syscall.h
@@ -0,0 +1,79 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_SYSCALL_H__
+#define __ASM_OPENRISC_SYSCALL_H__
+
+#include <uapi/linux/audit.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+
+static inline int
+syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+	return regs->orig_gpr11;
+}
+
+static inline void
+syscall_rollback(struct task_struct *task, struct pt_regs *regs)
+{
+	regs->gpr[11] = regs->orig_gpr11;
+}
+
+static inline long
+syscall_get_error(struct task_struct *task, struct pt_regs *regs)
+{
+	return IS_ERR_VALUE(regs->gpr[11]) ? regs->gpr[11] : 0;
+}
+
+static inline long
+syscall_get_return_value(struct task_struct *task, struct pt_regs *regs)
+{
+	return regs->gpr[11];
+}
+
+static inline void
+syscall_set_return_value(struct task_struct *task, struct pt_regs *regs,
+			 int error, long val)
+{
+	regs->gpr[11] = (long) error ?: val;
+}
+
+static inline void
+syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
+		      unsigned int i, unsigned int n, unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+
+	memcpy(args, &regs->gpr[3 + i], n * sizeof(args[0]));
+}
+
+static inline void
+syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+		      unsigned int i, unsigned int n, const unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+
+	memcpy(&regs->gpr[3 + i], args, n * sizeof(args[0]));
+}
+
+static inline int syscall_get_arch(void)
+{
+	return AUDIT_ARCH_OPENRISC;
+}
+#endif
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/syscalls.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/syscalls.h
new file mode 100644
index 0000000..8ee8168
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/syscalls.h
@@ -0,0 +1,34 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_SYSCALLS_H
+#define __ASM_OPENRISC_SYSCALLS_H
+
+asmlinkage long sys_or1k_atomic(unsigned long type, unsigned long *v1,
+				unsigned long *v2);
+
+#include <asm-generic/syscalls.h>
+
+asmlinkage long __sys_clone(unsigned long clone_flags, unsigned long newsp,
+			void __user *parent_tid, void __user *child_tid, int tls);
+asmlinkage long __sys_fork(void);
+
+#define sys_clone __sys_clone
+#define sys_fork __sys_fork
+
+#endif /* __ASM_OPENRISC_SYSCALLS_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/thread_info.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/thread_info.h
new file mode 100644
index 0000000..6e619a7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/thread_info.h
@@ -0,0 +1,127 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+#include <asm/processor.h>
+#endif
+
+
+/* THREAD_SIZE is the size of the task_struct/kernel_stack combo.
+ * normally, the stack is found by doing something like p + THREAD_SIZE
+ * in or32, a page is 8192 bytes, which seems like a sane size
+ */
+
+#define THREAD_SIZE_ORDER 0
+#define THREAD_SIZE       (PAGE_SIZE << THREAD_SIZE_ORDER)
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ *   must also be changed
+ */
+#ifndef __ASSEMBLY__
+
+typedef unsigned long mm_segment_t;
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	unsigned long		flags;		/* low level flags */
+	__u32			cpu;		/* current CPU */
+	__s32			preempt_count; /* 0 => preemptable, <0 => BUG */
+
+	mm_segment_t		addr_limit; /* thread address space:
+					       0-0x7FFFFFFF for user-thead
+					       0-0xFFFFFFFF for kernel-thread
+					     */
+	__u8			supervisor_stack[0];
+
+	/* saved context data */
+	unsigned long           ksp;
+};
+#endif
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+#define INIT_THREAD_INFO(tsk)				\
+{							\
+	.task		= &tsk,				\
+	.flags		= 0,				\
+	.cpu		= 0,				\
+	.preempt_count	= 1,				\
+	.addr_limit	= KERNEL_DS,			\
+	.ksp            = 0,                            \
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+
+/* how to get the thread information struct from C */
+register struct thread_info *current_thread_info_reg asm("r10");
+#define current_thread_info()   (current_thread_info_reg)
+
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * thread information flags
+ *   these are process state flags that various assembly files may need to
+ *   access
+ *   - pending work-to-be-done flags are in LSW
+ *   - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_SINGLESTEP		4	/* restore singlestep on return to user
+					 * mode
+					 */
+#define TIF_SYSCALL_TRACEPOINT  8       /* for ftrace syscall instrumentation */
+#define TIF_RESTORE_SIGMASK     9
+#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling						 * TIF_NEED_RESCHED
+					 */
+#define TIF_MEMDIE              17
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+
+/* Work to do when returning from interrupt/exception */
+/* For OpenRISC, this is anything in the LSW other than syscall trace */
+#define _TIF_WORK_MASK (0xff & ~(_TIF_SYSCALL_TRACE|_TIF_SINGLESTEP))
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/timex.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/timex.h
new file mode 100644
index 0000000..9935cad
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/timex.h
@@ -0,0 +1,36 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_TIMEX_H
+#define __ASM_OPENRISC_TIMEX_H
+
+#define get_cycles get_cycles
+
+#include <asm-generic/timex.h>
+#include <asm/spr.h>
+#include <asm/spr_defs.h>
+
+static inline cycles_t get_cycles(void)
+{
+	return mfspr(SPR_TTCR);
+}
+
+/* This isn't really used any more */
+#define CLOCK_TICK_RATE 1000
+
+#define ARCH_HAS_READ_CURRENT_TIMER
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/tlb.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/tlb.h
new file mode 100644
index 0000000..fa4376a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/tlb.h
@@ -0,0 +1,34 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_TLB_H__
+#define __ASM_OPENRISC_TLB_H__
+
+/*
+ * or32 doesn't need any special per-pte or
+ * per-vma handling..
+ */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+#include <linux/pagemap.h>
+#include <asm-generic/tlb.h>
+
+#endif /* __ASM_OPENRISC_TLB_H__ */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/tlbflush.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/tlbflush.h
new file mode 100644
index 0000000..6a2accd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/tlbflush.h
@@ -0,0 +1,55 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_TLBFLUSH_H
+#define __ASM_OPENRISC_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/current.h>
+#include <linux/sched.h>
+
+/*
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(mm, start, end) flushes a range of pages
+ */
+
+void flush_tlb_all(void);
+void flush_tlb_mm(struct mm_struct *mm);
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr);
+void flush_tlb_range(struct vm_area_struct *vma,
+		     unsigned long start,
+		     unsigned long end);
+
+static inline void flush_tlb(void)
+{
+	flush_tlb_mm(current->mm);
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+	flush_tlb_range(NULL, start, end);
+}
+
+#endif /* __ASM_OPENRISC_TLBFLUSH_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/uaccess.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/uaccess.h
new file mode 100644
index 0000000..8b204cd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/uaccess.h
@@ -0,0 +1,273 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_UACCESS_H
+#define __ASM_OPENRISC_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/prefetch.h>
+#include <linux/string.h>
+#include <asm/page.h>
+#include <asm/extable.h>
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+/* addr_limit is the maximum accessible address for the task. we misuse
+ * the KERNEL_DS and USER_DS values to both assign and compare the
+ * addr_limit values through the equally misnamed get/set_fs macros.
+ * (see above)
+ */
+
+#define KERNEL_DS	(~0UL)
+#define get_ds()	(KERNEL_DS)
+
+#define USER_DS		(TASK_SIZE)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b)	((a) == (b))
+
+/* Ensure that the range from addr to addr+size is all within the process'
+ * address space
+ */
+#define __range_ok(addr, size) (size <= get_fs() && addr <= (get_fs()-size))
+
+/* Ensure that addr is below task's addr_limit */
+#define __addr_ok(addr) ((unsigned long) addr < get_fs())
+
+#define access_ok(type, addr, size)						\
+({ 									\
+	unsigned long __ao_addr = (unsigned long)(addr);		\
+	unsigned long __ao_size = (unsigned long)(size);		\
+	__range_ok(__ao_addr, __ao_size);				\
+})
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the uglyness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ *
+ * As we use the same address space for kernel and user data on the
+ * PowerPC, we can just do these as direct assignments.  (Of course, the
+ * exception handling means that it's no longer "just"...)
+ */
+#define get_user(x, ptr) \
+	__get_user_check((x), (ptr), sizeof(*(ptr)))
+#define put_user(x, ptr) \
+	__put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#define __get_user(x, ptr) \
+	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __put_user(x, ptr) \
+	__put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+extern long __put_user_bad(void);
+
+#define __put_user_nocheck(x, ptr, size)		\
+({							\
+	long __pu_err;					\
+	__put_user_size((x), (ptr), (size), __pu_err);	\
+	__pu_err;					\
+})
+
+#define __put_user_check(x, ptr, size)					\
+({									\
+	long __pu_err = -EFAULT;					\
+	__typeof__(*(ptr)) *__pu_addr = (ptr);				\
+	if (access_ok(VERIFY_WRITE, __pu_addr, size))			\
+		__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	__pu_err;							\
+})
+
+#define __put_user_size(x, ptr, size, retval)				\
+do {									\
+	retval = 0;							\
+	switch (size) {							\
+	case 1: __put_user_asm(x, ptr, retval, "l.sb"); break;		\
+	case 2: __put_user_asm(x, ptr, retval, "l.sh"); break;		\
+	case 4: __put_user_asm(x, ptr, retval, "l.sw"); break;		\
+	case 8: __put_user_asm2(x, ptr, retval); break;			\
+	default: __put_user_bad();					\
+	}								\
+} while (0)
+
+struct __large_struct {
+	unsigned long buf[100];
+};
+#define __m(x) (*(struct __large_struct *)(x))
+
+/*
+ * We don't tell gcc that we are accessing memory, but this is OK
+ * because we do not write to any memory gcc knows about, so there
+ * are no aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, op)			\
+	__asm__ __volatile__(					\
+		"1:	"op" 0(%2),%1\n"			\
+		"2:\n"						\
+		".section .fixup,\"ax\"\n"			\
+		"3:	l.addi %0,r0,%3\n"			\
+		"	l.j 2b\n"				\
+		"	l.nop\n"				\
+		".previous\n"					\
+		".section __ex_table,\"a\"\n"			\
+		"	.align 2\n"				\
+		"	.long 1b,3b\n"				\
+		".previous"					\
+		: "=r"(err)					\
+		: "r"(x), "r"(addr), "i"(-EFAULT), "0"(err))
+
+#define __put_user_asm2(x, addr, err)				\
+	__asm__ __volatile__(					\
+		"1:	l.sw 0(%2),%1\n"			\
+		"2:	l.sw 4(%2),%H1\n"			\
+		"3:\n"						\
+		".section .fixup,\"ax\"\n"			\
+		"4:	l.addi %0,r0,%3\n"			\
+		"	l.j 3b\n"				\
+		"	l.nop\n"				\
+		".previous\n"					\
+		".section __ex_table,\"a\"\n"			\
+		"	.align 2\n"				\
+		"	.long 1b,4b\n"				\
+		"	.long 2b,4b\n"				\
+		".previous"					\
+		: "=r"(err)					\
+		: "r"(x), "r"(addr), "i"(-EFAULT), "0"(err))
+
+#define __get_user_nocheck(x, ptr, size)			\
+({								\
+	long __gu_err, __gu_val;				\
+	__get_user_size(__gu_val, (ptr), (size), __gu_err);	\
+	(x) = (__force __typeof__(*(ptr)))__gu_val;		\
+	__gu_err;						\
+})
+
+#define __get_user_check(x, ptr, size)					\
+({									\
+	long __gu_err = -EFAULT, __gu_val = 0;				\
+	const __typeof__(*(ptr)) * __gu_addr = (ptr);			\
+	if (access_ok(VERIFY_READ, __gu_addr, size))			\
+		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
+	__gu_err;							\
+})
+
+extern long __get_user_bad(void);
+
+#define __get_user_size(x, ptr, size, retval)				\
+do {									\
+	retval = 0;							\
+	switch (size) {							\
+	case 1: __get_user_asm(x, ptr, retval, "l.lbz"); break;		\
+	case 2: __get_user_asm(x, ptr, retval, "l.lhz"); break;		\
+	case 4: __get_user_asm(x, ptr, retval, "l.lwz"); break;		\
+	case 8: __get_user_asm2(x, ptr, retval); break;			\
+	default: (x) = __get_user_bad();				\
+	}								\
+} while (0)
+
+#define __get_user_asm(x, addr, err, op)		\
+	__asm__ __volatile__(				\
+		"1:	"op" %1,0(%2)\n"		\
+		"2:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"3:	l.addi %0,r0,%3\n"		\
+		"	l.addi %1,r0,0\n"		\
+		"	l.j 2b\n"			\
+		"	l.nop\n"			\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+		"	.align 2\n"			\
+		"	.long 1b,3b\n"			\
+		".previous"				\
+		: "=r"(err), "=r"(x)			\
+		: "r"(addr), "i"(-EFAULT), "0"(err))
+
+#define __get_user_asm2(x, addr, err)			\
+	__asm__ __volatile__(				\
+		"1:	l.lwz %1,0(%2)\n"		\
+		"2:	l.lwz %H1,4(%2)\n"		\
+		"3:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"4:	l.addi %0,r0,%3\n"		\
+		"	l.addi %1,r0,0\n"		\
+		"	l.addi %H1,r0,0\n"		\
+		"	l.j 3b\n"			\
+		"	l.nop\n"			\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+		"	.align 2\n"			\
+		"	.long 1b,4b\n"			\
+		"	.long 2b,4b\n"			\
+		".previous"				\
+		: "=r"(err), "=&r"(x)			\
+		: "r"(addr), "i"(-EFAULT), "0"(err))
+
+/* more complex routines */
+
+extern unsigned long __must_check
+__copy_tofrom_user(void *to, const void *from, unsigned long size);
+static inline unsigned long
+raw_copy_from_user(void *to, const void __user *from, unsigned long size)
+{
+	return __copy_tofrom_user(to, (__force const void *)from, size);
+}
+static inline unsigned long
+raw_copy_to_user(void *to, const void __user *from, unsigned long size)
+{
+	return __copy_tofrom_user((__force void *)to, from, size);
+}
+#define INLINE_COPY_FROM_USER
+#define INLINE_COPY_TO_USER
+
+extern unsigned long __clear_user(void *addr, unsigned long size);
+
+static inline __must_check unsigned long
+clear_user(void *addr, unsigned long size)
+{
+	if (likely(access_ok(VERIFY_WRITE, addr, size)))
+		size = __clear_user(addr, size);
+	return size;
+}
+
+#define user_addr_max() \
+	(uaccess_kernel() ? ~0UL : TASK_SIZE)
+
+extern long strncpy_from_user(char *dest, const char __user *src, long count);
+
+extern __must_check long strnlen_user(const char __user *str, long n);
+
+#endif /* __ASM_OPENRISC_UACCESS_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/asm/unaligned.h b/src/kernel/linux/v4.14/arch/openrisc/include/asm/unaligned.h
new file mode 100644
index 0000000..1141cbd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/asm/unaligned.h
@@ -0,0 +1,51 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_UNALIGNED_H
+#define __ASM_OPENRISC_UNALIGNED_H
+
+/*
+ * This is copied from the generic implementation and the C-struct
+ * variant replaced with the memmove variant.  The GCC compiler
+ * for the OR32 arch optimizes too aggressively for the C-struct
+ * variant to work, so use the memmove variant instead.
+ *
+ * It may be worth considering implementing the unaligned access
+ * exception handler and allowing unaligned accesses (access_ok.h)...
+ * not sure if it would be much of a performance win without further
+ * investigation.
+ */
+#include <asm/byteorder.h>
+
+#if defined(__LITTLE_ENDIAN)
+# include <linux/unaligned/le_memmove.h>
+# include <linux/unaligned/be_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_le
+# define put_unaligned	__put_unaligned_le
+#elif defined(__BIG_ENDIAN)
+# include <linux/unaligned/be_memmove.h>
+# include <linux/unaligned/le_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_be
+# define put_unaligned	__put_unaligned_be
+#else
+# error need to define endianess
+#endif
+
+#endif /* __ASM_OPENRISC_UNALIGNED_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/Kbuild b/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/Kbuild
new file mode 100644
index 0000000..62286db
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/Kbuild
@@ -0,0 +1,31 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
+generic-y += auxvec.h
+generic-y += bitsperlong.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += kvm_para.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += setup.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
+generic-y += siginfo.h
+generic-y += signal.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += swab.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += types.h
+generic-y += ucontext.h
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/byteorder.h b/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/byteorder.h
new file mode 100644
index 0000000..60d14f7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/byteorder.h
@@ -0,0 +1 @@
+#include <linux/byteorder/big_endian.h>
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/elf.h b/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/elf.h
new file mode 100644
index 0000000..e892d50
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/elf.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UAPI__ASM_OPENRISC_ELF_H
+#define _UAPI__ASM_OPENRISC_ELF_H
+
+/*
+ * This files is partially exported to userspace.  This allows us to keep
+ * the ELF bits in one place which should assist in keeping the kernel and
+ * userspace in sync.
+ */
+
+/*
+ * ELF register definitions..
+ */
+
+/* for struct user_regs_struct definition */
+#include <asm/ptrace.h>
+
+/* The OR1K relocation types... not all relevant for module loader */
+#define R_OR32_NONE	0
+#define R_OR32_32	1
+#define R_OR32_16	2
+#define R_OR32_8	3
+#define R_OR32_CONST	4
+#define R_OR32_CONSTH	5
+#define R_OR32_JUMPTARG	6
+#define R_OR32_VTINHERIT 7
+#define R_OR32_VTENTRY	8
+
+typedef unsigned long elf_greg_t;
+
+/*
+ * Note that NGREG is defined to ELF_NGREG in include/linux/elfcore.h, and is
+ * thus exposed to user-space.
+ */
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+/* A placeholder; OR32 does not have fp support yes, so no fp regs for now.  */
+typedef unsigned long elf_fpregset_t;
+
+/* EM_OPENRISC is defined in linux/elf-em.h */
+#define EM_OR32         0x8472
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH	EM_OR32
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+
+#endif /* _UAPI__ASM_OPENRISC_ELF_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/param.h b/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/param.h
new file mode 100644
index 0000000..103471e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/param.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_PARAM_H
+#define __ASM_OPENRISC_PARAM_H
+
+#define EXEC_PAGESIZE	8192
+
+#include <asm-generic/param.h>
+
+#endif /* __ASM_OPENRISC_PARAM_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/ptrace.h b/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..d4fab26
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/ptrace.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UAPI__ASM_OPENRISC_PTRACE_H
+#define _UAPI__ASM_OPENRISC_PTRACE_H
+
+#ifndef __ASSEMBLY__
+/*
+ * This is the layout of the regset returned by the GETREGSET ptrace call
+ */
+struct user_regs_struct {
+	/* GPR R0-R31... */
+	unsigned long gpr[32];
+	unsigned long pc;
+	unsigned long sr;
+};
+#endif
+
+
+#endif /* _UAPI__ASM_OPENRISC_PTRACE_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/sigcontext.h b/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/sigcontext.h
new file mode 100644
index 0000000..8ab775f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/sigcontext.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_SIGCONTEXT_H
+#define __ASM_OPENRISC_SIGCONTEXT_H
+
+#include <asm/ptrace.h>
+
+/* This struct is saved by setup_frame in signal.c, to keep the current
+   context while a signal handler is executed. It's restored by sys_sigreturn.
+*/
+
+struct sigcontext {
+	struct user_regs_struct regs;  /* needs to be first */
+	unsigned long oldmask;
+};
+
+#endif /* __ASM_OPENRISC_SIGCONTEXT_H */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/unistd.h b/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/unistd.h
new file mode 100644
index 0000000..9a3ee38
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/include/uapi/asm/unistd.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#define __ARCH_HAVE_MMU
+
+#define sys_mmap2 sys_mmap_pgoff
+
+#define __ARCH_WANT_RENAMEAT
+#define __ARCH_WANT_SYS_FORK
+#define __ARCH_WANT_SYS_CLONE
+
+#include <asm-generic/unistd.h>
+
+#define __NR_or1k_atomic __NR_arch_specific_syscall
+__SYSCALL(__NR_or1k_atomic, sys_or1k_atomic)
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/.gitignore b/src/kernel/linux/v4.14/arch/openrisc/kernel/.gitignore
new file mode 100644
index 0000000..c5f676c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/Makefile b/src/kernel/linux/v4.14/arch/openrisc/kernel/Makefile
new file mode 100644
index 0000000..c4ea6ca
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+
+extra-y	:= head.o vmlinux.lds
+
+obj-y	:= setup.o or32_ksyms.o process.o dma.o \
+	   traps.o time.o irq.o entry.o ptrace.o signal.o \
+	   sys_call_table.o
+
+obj-$(CONFIG_MODULES)		+= module.o
+obj-$(CONFIG_OF)		+= prom.o
+
+clean:
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/asm-offsets.c b/src/kernel/linux/v4.14/arch/openrisc/kernel/asm-offsets.c
new file mode 100644
index 0000000..ddb7368
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/asm-offsets.c
@@ -0,0 +1,66 @@
+/*
+ * OpenRISC asm-offsets.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ * This program is used to generate definitions needed by
+ * assembly language modules.
+ *
+ * We use the technique used in the OSF Mach kernel code:
+ * generate asm statements containing #defines,
+ * compile this file to assembler, and then extract the
+ * #defines from the assembly-language output.
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/thread_info.h>
+#include <linux/kbuild.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+
+int main(void)
+{
+	/* offsets into the task_struct */
+	DEFINE(TASK_STATE, offsetof(struct task_struct, state));
+	DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
+	DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
+	DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+	DEFINE(TASK_MM, offsetof(struct task_struct, mm));
+	DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+
+	/* offsets into thread_info */
+	DEFINE(TI_TASK, offsetof(struct thread_info, task));
+	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+	DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
+	DEFINE(TI_KSP, offsetof(struct thread_info, ksp));
+
+	DEFINE(PT_SIZE, sizeof(struct pt_regs));
+
+	/* Interrupt register frame */
+	DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD);
+	DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
+
+	DEFINE(NUM_USER_SEGMENTS, TASK_SIZE >> 28);
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/dma.c b/src/kernel/linux/v4.14/arch/openrisc/kernel/dma.c
new file mode 100644
index 0000000..b10369b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/dma.c
@@ -0,0 +1,256 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ * DMA mapping callbacks...
+ * As alloc_coherent is the only DMA callback being used currently, that's
+ * the only thing implemented properly.  The rest need looking into...
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/dma-debug.h>
+#include <linux/export.h>
+
+#include <asm/cpuinfo.h>
+#include <asm/spr_defs.h>
+#include <asm/tlbflush.h>
+
+static int
+page_set_nocache(pte_t *pte, unsigned long addr,
+		 unsigned long next, struct mm_walk *walk)
+{
+	unsigned long cl;
+
+	pte_val(*pte) |= _PAGE_CI;
+
+	/*
+	 * Flush the page out of the TLB so that the new page flags get
+	 * picked up next time there's an access
+	 */
+	flush_tlb_page(NULL, addr);
+
+	/* Flush page out of dcache */
+	for (cl = __pa(addr); cl < __pa(next); cl += cpuinfo.dcache_block_size)
+		mtspr(SPR_DCBFR, cl);
+
+	return 0;
+}
+
+static int
+page_clear_nocache(pte_t *pte, unsigned long addr,
+		   unsigned long next, struct mm_walk *walk)
+{
+	pte_val(*pte) &= ~_PAGE_CI;
+
+	/*
+	 * Flush the page out of the TLB so that the new page flags get
+	 * picked up next time there's an access
+	 */
+	flush_tlb_page(NULL, addr);
+
+	return 0;
+}
+
+/*
+ * Alloc "coherent" memory, which for OpenRISC means simply uncached.
+ *
+ * This function effectively just calls __get_free_pages, sets the
+ * cache-inhibit bit on those pages, and makes sure that the pages are
+ * flushed out of the cache before they are used.
+ *
+ * If the NON_CONSISTENT attribute is set, then this function just
+ * returns "normal", cachable memory.
+ *
+ * There are additional flags WEAK_ORDERING and WRITE_COMBINE to take
+ * into consideration here, too.  All current known implementations of
+ * the OR1K support only strongly ordered memory accesses, so that flag
+ * is being ignored for now; uncached but write-combined memory is a
+ * missing feature of the OR1K.
+ */
+static void *
+or1k_dma_alloc(struct device *dev, size_t size,
+	       dma_addr_t *dma_handle, gfp_t gfp,
+	       unsigned long attrs)
+{
+	unsigned long va;
+	void *page;
+	struct mm_walk walk = {
+		.pte_entry = page_set_nocache,
+		.mm = &init_mm
+	};
+
+	page = alloc_pages_exact(size, gfp);
+	if (!page)
+		return NULL;
+
+	/* This gives us the real physical address of the first page. */
+	*dma_handle = __pa(page);
+
+	va = (unsigned long)page;
+
+	if ((attrs & DMA_ATTR_NON_CONSISTENT) == 0) {
+		/*
+		 * We need to iterate through the pages, clearing the dcache for
+		 * them and setting the cache-inhibit bit.
+		 */
+		if (walk_page_range(va, va + size, &walk)) {
+			free_pages_exact(page, size);
+			return NULL;
+		}
+	}
+
+	return (void *)va;
+}
+
+static void
+or1k_dma_free(struct device *dev, size_t size, void *vaddr,
+	      dma_addr_t dma_handle, unsigned long attrs)
+{
+	unsigned long va = (unsigned long)vaddr;
+	struct mm_walk walk = {
+		.pte_entry = page_clear_nocache,
+		.mm = &init_mm
+	};
+
+	if ((attrs & DMA_ATTR_NON_CONSISTENT) == 0) {
+		/* walk_page_range shouldn't be able to fail here */
+		WARN_ON(walk_page_range(va, va + size, &walk));
+	}
+
+	free_pages_exact(vaddr, size);
+}
+
+static dma_addr_t
+or1k_map_page(struct device *dev, struct page *page,
+	      unsigned long offset, size_t size,
+	      enum dma_data_direction dir,
+	      unsigned long attrs)
+{
+	unsigned long cl;
+	dma_addr_t addr = page_to_phys(page) + offset;
+
+	if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+		return addr;
+
+	switch (dir) {
+	case DMA_TO_DEVICE:
+		/* Flush the dcache for the requested range */
+		for (cl = addr; cl < addr + size;
+		     cl += cpuinfo.dcache_block_size)
+			mtspr(SPR_DCBFR, cl);
+		break;
+	case DMA_FROM_DEVICE:
+		/* Invalidate the dcache for the requested range */
+		for (cl = addr; cl < addr + size;
+		     cl += cpuinfo.dcache_block_size)
+			mtspr(SPR_DCBIR, cl);
+		break;
+	default:
+		/*
+		 * NOTE: If dir == DMA_BIDIRECTIONAL then there's no need to
+		 * flush nor invalidate the cache here as the area will need
+		 * to be manually synced anyway.
+		 */
+		break;
+	}
+
+	return addr;
+}
+
+static void
+or1k_unmap_page(struct device *dev, dma_addr_t dma_handle,
+		size_t size, enum dma_data_direction dir,
+		unsigned long attrs)
+{
+	/* Nothing special to do here... */
+}
+
+static int
+or1k_map_sg(struct device *dev, struct scatterlist *sg,
+	    int nents, enum dma_data_direction dir,
+	    unsigned long attrs)
+{
+	struct scatterlist *s;
+	int i;
+
+	for_each_sg(sg, s, nents, i) {
+		s->dma_address = or1k_map_page(dev, sg_page(s), s->offset,
+					       s->length, dir, 0);
+	}
+
+	return nents;
+}
+
+static void
+or1k_unmap_sg(struct device *dev, struct scatterlist *sg,
+	      int nents, enum dma_data_direction dir,
+	      unsigned long attrs)
+{
+	struct scatterlist *s;
+	int i;
+
+	for_each_sg(sg, s, nents, i) {
+		or1k_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir, 0);
+	}
+}
+
+static void
+or1k_sync_single_for_cpu(struct device *dev,
+			 dma_addr_t dma_handle, size_t size,
+			 enum dma_data_direction dir)
+{
+	unsigned long cl;
+	dma_addr_t addr = dma_handle;
+
+	/* Invalidate the dcache for the requested range */
+	for (cl = addr; cl < addr + size; cl += cpuinfo.dcache_block_size)
+		mtspr(SPR_DCBIR, cl);
+}
+
+static void
+or1k_sync_single_for_device(struct device *dev,
+			    dma_addr_t dma_handle, size_t size,
+			    enum dma_data_direction dir)
+{
+	unsigned long cl;
+	dma_addr_t addr = dma_handle;
+
+	/* Flush the dcache for the requested range */
+	for (cl = addr; cl < addr + size; cl += cpuinfo.dcache_block_size)
+		mtspr(SPR_DCBFR, cl);
+}
+
+const struct dma_map_ops or1k_dma_map_ops = {
+	.alloc = or1k_dma_alloc,
+	.free = or1k_dma_free,
+	.map_page = or1k_map_page,
+	.unmap_page = or1k_unmap_page,
+	.map_sg = or1k_map_sg,
+	.unmap_sg = or1k_unmap_sg,
+	.sync_single_for_cpu = or1k_sync_single_for_cpu,
+	.sync_single_for_device = or1k_sync_single_for_device,
+};
+EXPORT_SYMBOL(or1k_dma_map_ops);
+
+/* Number of entries preallocated for DMA-API debugging */
+#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
+
+static int __init dma_init(void)
+{
+	dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+
+	return 0;
+}
+fs_initcall(dma_init);
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/entry.S b/src/kernel/linux/v4.14/arch/openrisc/kernel/entry.S
new file mode 100644
index 0000000..0fdfa71
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/entry.S
@@ -0,0 +1,1150 @@
+/*
+ * OpenRISC entry.S
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2005 Gyorgy Jeney <nog@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/processor.h>
+#include <asm/unistd.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/spr_defs.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/asm-offsets.h>
+
+#define DISABLE_INTERRUPTS(t1,t2)			\
+	l.mfspr t2,r0,SPR_SR				;\
+	l.movhi	t1,hi(~(SPR_SR_IEE|SPR_SR_TEE))		;\
+	l.ori	t1,t1,lo(~(SPR_SR_IEE|SPR_SR_TEE))	;\
+	l.and   t2,t2,t1				;\
+	l.mtspr r0,t2,SPR_SR
+
+#define ENABLE_INTERRUPTS(t1)				\
+	l.mfspr	t1,r0,SPR_SR				;\
+	l.ori	t1,t1,lo(SPR_SR_IEE|SPR_SR_TEE)		;\
+	l.mtspr	r0,t1,SPR_SR
+
+/* =========================================================[ macros ]=== */
+
+/*
+ * We need to disable interrupts at beginning of RESTORE_ALL
+ * since interrupt might come in after we've loaded EPC return address
+ * and overwrite EPC with address somewhere in RESTORE_ALL
+ * which is of course wrong!
+ */
+
+#define RESTORE_ALL						\
+	DISABLE_INTERRUPTS(r3,r4)				;\
+	l.lwz   r3,PT_PC(r1)					;\
+	l.mtspr r0,r3,SPR_EPCR_BASE				;\
+	l.lwz   r3,PT_SR(r1)					;\
+	l.mtspr r0,r3,SPR_ESR_BASE				;\
+	l.lwz   r2,PT_GPR2(r1)					;\
+	l.lwz   r3,PT_GPR3(r1)					;\
+	l.lwz   r4,PT_GPR4(r1)					;\
+	l.lwz   r5,PT_GPR5(r1)					;\
+	l.lwz   r6,PT_GPR6(r1)					;\
+	l.lwz   r7,PT_GPR7(r1)					;\
+	l.lwz   r8,PT_GPR8(r1)					;\
+	l.lwz   r9,PT_GPR9(r1)					;\
+	l.lwz   r10,PT_GPR10(r1)					;\
+	l.lwz   r11,PT_GPR11(r1)					;\
+	l.lwz   r12,PT_GPR12(r1)					;\
+	l.lwz   r13,PT_GPR13(r1)					;\
+	l.lwz   r14,PT_GPR14(r1)					;\
+	l.lwz   r15,PT_GPR15(r1)					;\
+	l.lwz   r16,PT_GPR16(r1)					;\
+	l.lwz   r17,PT_GPR17(r1)					;\
+	l.lwz   r18,PT_GPR18(r1)					;\
+	l.lwz   r19,PT_GPR19(r1)					;\
+	l.lwz   r20,PT_GPR20(r1)					;\
+	l.lwz   r21,PT_GPR21(r1)					;\
+	l.lwz   r22,PT_GPR22(r1)					;\
+	l.lwz   r23,PT_GPR23(r1)					;\
+	l.lwz   r24,PT_GPR24(r1)					;\
+	l.lwz   r25,PT_GPR25(r1)					;\
+	l.lwz   r26,PT_GPR26(r1)					;\
+	l.lwz   r27,PT_GPR27(r1)					;\
+	l.lwz   r28,PT_GPR28(r1)					;\
+	l.lwz   r29,PT_GPR29(r1)					;\
+	l.lwz   r30,PT_GPR30(r1)					;\
+	l.lwz   r31,PT_GPR31(r1)					;\
+	l.lwz   r1,PT_SP(r1)					;\
+	l.rfe
+
+
+#define EXCEPTION_ENTRY(handler)				\
+	.global	handler						;\
+handler:							;\
+	/* r1, EPCR, ESR a already saved */			;\
+	l.sw	PT_GPR2(r1),r2					;\
+	l.sw    PT_GPR3(r1),r3					;\
+	/* r4 already save */					;\
+	l.sw    PT_GPR5(r1),r5					;\
+	l.sw    PT_GPR6(r1),r6					;\
+	l.sw    PT_GPR7(r1),r7					;\
+	l.sw    PT_GPR8(r1),r8					;\
+	l.sw    PT_GPR9(r1),r9					;\
+	/* r10 already saved */					;\
+	l.sw    PT_GPR11(r1),r11					;\
+	/* r12 already saved */					;\
+	l.sw    PT_GPR13(r1),r13					;\
+	l.sw    PT_GPR14(r1),r14					;\
+	l.sw    PT_GPR15(r1),r15					;\
+	l.sw    PT_GPR16(r1),r16					;\
+	l.sw    PT_GPR17(r1),r17					;\
+	l.sw    PT_GPR18(r1),r18					;\
+	l.sw    PT_GPR19(r1),r19					;\
+	l.sw    PT_GPR20(r1),r20					;\
+	l.sw    PT_GPR21(r1),r21					;\
+	l.sw    PT_GPR22(r1),r22					;\
+	l.sw    PT_GPR23(r1),r23					;\
+	l.sw    PT_GPR24(r1),r24					;\
+	l.sw    PT_GPR25(r1),r25					;\
+	l.sw    PT_GPR26(r1),r26					;\
+	l.sw    PT_GPR27(r1),r27					;\
+	l.sw    PT_GPR28(r1),r28					;\
+	l.sw    PT_GPR29(r1),r29					;\
+	/* r30 already save */					;\
+/*        l.sw    PT_GPR30(r1),r30*/					;\
+	l.sw    PT_GPR31(r1),r31					;\
+	/* Store -1 in orig_gpr11 for non-syscall exceptions */	;\
+	l.addi	r30,r0,-1					;\
+	l.sw	PT_ORIG_GPR11(r1),r30
+
+#define UNHANDLED_EXCEPTION(handler,vector)			\
+	.global	handler						;\
+handler:							;\
+	/* r1, EPCR, ESR already saved */			;\
+	l.sw    PT_GPR2(r1),r2					;\
+	l.sw    PT_GPR3(r1),r3					;\
+	l.sw    PT_GPR5(r1),r5					;\
+	l.sw    PT_GPR6(r1),r6					;\
+	l.sw    PT_GPR7(r1),r7					;\
+	l.sw    PT_GPR8(r1),r8					;\
+	l.sw    PT_GPR9(r1),r9					;\
+	/* r10 already saved */					;\
+	l.sw    PT_GPR11(r1),r11					;\
+	/* r12 already saved */					;\
+	l.sw    PT_GPR13(r1),r13					;\
+	l.sw    PT_GPR14(r1),r14					;\
+	l.sw    PT_GPR15(r1),r15					;\
+	l.sw    PT_GPR16(r1),r16					;\
+	l.sw    PT_GPR17(r1),r17					;\
+	l.sw    PT_GPR18(r1),r18					;\
+	l.sw    PT_GPR19(r1),r19					;\
+	l.sw    PT_GPR20(r1),r20					;\
+	l.sw    PT_GPR21(r1),r21					;\
+	l.sw    PT_GPR22(r1),r22					;\
+	l.sw    PT_GPR23(r1),r23					;\
+	l.sw    PT_GPR24(r1),r24					;\
+	l.sw    PT_GPR25(r1),r25					;\
+	l.sw    PT_GPR26(r1),r26					;\
+	l.sw    PT_GPR27(r1),r27					;\
+	l.sw    PT_GPR28(r1),r28					;\
+	l.sw    PT_GPR29(r1),r29					;\
+	/* r31 already saved */					;\
+	l.sw    PT_GPR30(r1),r30					;\
+/*        l.sw    PT_GPR31(r1),r31	*/				;\
+	/* Store -1 in orig_gpr11 for non-syscall exceptions */	;\
+	l.addi	r30,r0,-1					;\
+	l.sw	PT_ORIG_GPR11(r1),r30				;\
+	l.addi	r3,r1,0						;\
+	/* r4 is exception EA */				;\
+	l.addi	r5,r0,vector					;\
+	l.jal	unhandled_exception				;\
+	 l.nop							;\
+	l.j	_ret_from_exception				;\
+	 l.nop
+
+/* clobbers 'reg' */
+#define CLEAR_LWA_FLAG(reg)		\
+	l.movhi	reg,hi(lwa_flag)	;\
+	l.ori	reg,reg,lo(lwa_flag)	;\
+	l.sw	0(reg),r0
+/*
+ * NOTE: one should never assume that SPR_EPC, SPR_ESR, SPR_EEAR
+ *       contain the same values as when exception we're handling
+ *	 occured. in fact they never do. if you need them use
+ *	 values saved on stack (for SPR_EPC, SPR_ESR) or content
+ *       of r4 (for SPR_EEAR). for details look at EXCEPTION_HANDLE()
+ *       in 'arch/openrisc/kernel/head.S'
+ */
+
+/* =====================================================[ exceptions] === */
+
+/* ---[ 0x100: RESET exception ]----------------------------------------- */
+
+EXCEPTION_ENTRY(_tng_kernel_start)
+	l.jal	_start
+	 l.andi r0,r0,0
+
+/* ---[ 0x200: BUS exception ]------------------------------------------- */
+
+EXCEPTION_ENTRY(_bus_fault_handler)
+	CLEAR_LWA_FLAG(r3)
+	/* r4: EA of fault (set by EXCEPTION_HANDLE) */
+	l.jal   do_bus_fault
+	 l.addi  r3,r1,0 /* pt_regs */
+
+	l.j     _ret_from_exception
+	 l.nop
+
+/* ---[ 0x300: Data Page Fault exception ]------------------------------- */
+EXCEPTION_ENTRY(_dtlb_miss_page_fault_handler)
+	CLEAR_LWA_FLAG(r3)
+	l.and	r5,r5,r0
+	l.j	1f
+	 l.nop
+
+EXCEPTION_ENTRY(_data_page_fault_handler)
+	CLEAR_LWA_FLAG(r3)
+	/* set up parameters for do_page_fault */
+	l.ori	r5,r0,0x300		   // exception vector
+1:
+	l.addi  r3,r1,0                    // pt_regs
+	/* r4 set be EXCEPTION_HANDLE */   // effective address of fault
+
+#ifdef CONFIG_OPENRISC_NO_SPR_SR_DSX
+	l.lwz   r6,PT_PC(r3)               // address of an offending insn
+	l.lwz   r6,0(r6)                   // instruction that caused pf
+
+	l.srli  r6,r6,26                   // check opcode for jump insn
+	l.sfeqi r6,0                       // l.j
+	l.bf    8f
+	l.sfeqi r6,1                       // l.jal
+	l.bf    8f
+	l.sfeqi r6,3                       // l.bnf
+	l.bf    8f
+	l.sfeqi r6,4                       // l.bf
+	l.bf    8f
+	l.sfeqi r6,0x11                    // l.jr
+	l.bf    8f
+	l.sfeqi r6,0x12                    // l.jalr
+	l.bf    8f
+	 l.nop
+
+	l.j     9f
+	 l.nop
+
+8: // offending insn is in delay slot
+	l.lwz   r6,PT_PC(r3)               // address of an offending insn
+	l.addi  r6,r6,4
+	l.lwz   r6,0(r6)                   // instruction that caused pf
+	l.srli  r6,r6,26                   // get opcode
+9: // offending instruction opcode loaded in r6
+
+#else
+
+	l.mfspr r6,r0,SPR_SR               // SR
+	l.andi  r6,r6,SPR_SR_DSX           // check for delay slot exception
+	l.sfne  r6,r0                      // exception happened in delay slot
+	l.bnf   7f
+	 l.lwz  r6,PT_PC(r3)               // address of an offending insn
+
+	l.addi	r6,r6,4                    // offending insn is in delay slot
+7:
+	l.lwz   r6,0(r6)                   // instruction that caused pf
+	l.srli  r6,r6,26                   // check opcode for write access
+#endif
+
+	l.sfgeui r6,0x33                   // check opcode for write access
+	l.bnf   1f
+	l.sfleui r6,0x37
+	l.bnf   1f
+	l.ori   r6,r0,0x1                  // write access
+	l.j     2f
+	 l.nop
+1:	l.ori   r6,r0,0x0                  // !write access
+2:
+
+	/* call fault.c handler in or32/mm/fault.c */
+	l.jal   do_page_fault
+	 l.nop
+	l.j     _ret_from_exception
+	 l.nop
+
+/* ---[ 0x400: Insn Page Fault exception ]------------------------------- */
+EXCEPTION_ENTRY(_itlb_miss_page_fault_handler)
+	CLEAR_LWA_FLAG(r3)
+	l.and	r5,r5,r0
+	l.j	1f
+	 l.nop
+
+EXCEPTION_ENTRY(_insn_page_fault_handler)
+	CLEAR_LWA_FLAG(r3)
+	/* set up parameters for do_page_fault */
+	l.ori	r5,r0,0x400		   // exception vector
+1:
+	l.addi  r3,r1,0                    // pt_regs
+	/* r4 set be EXCEPTION_HANDLE */   // effective address of fault
+	l.ori	r6,r0,0x0		   // !write access
+
+	/* call fault.c handler in or32/mm/fault.c */
+	l.jal   do_page_fault
+	 l.nop
+	l.j     _ret_from_exception
+	 l.nop
+
+
+/* ---[ 0x500: Timer exception ]----------------------------------------- */
+
+EXCEPTION_ENTRY(_timer_handler)
+	CLEAR_LWA_FLAG(r3)
+	l.jal	timer_interrupt
+	 l.addi r3,r1,0 /* pt_regs */
+
+	l.j    _ret_from_intr
+	 l.nop
+
+/* ---[ 0x600: Alignment exception ]-------------------------------------- */
+
+EXCEPTION_ENTRY(_alignment_handler)
+	CLEAR_LWA_FLAG(r3)
+	/* r4: EA of fault (set by EXCEPTION_HANDLE) */
+	l.jal   do_unaligned_access
+	 l.addi  r3,r1,0 /* pt_regs */
+
+	l.j     _ret_from_exception
+	 l.nop
+
+#if 0
+EXCEPTION_ENTRY(_alignment_handler)
+//        l.mfspr r2,r0,SPR_EEAR_BASE     /* Load the effective address */
+	l.addi	r2,r4,0
+//        l.mfspr r5,r0,SPR_EPCR_BASE     /* Load the insn address */
+	l.lwz   r5,PT_PC(r1)
+
+	l.lwz   r3,0(r5)                /* Load insn */
+	l.srli  r4,r3,26                /* Shift left to get the insn opcode */
+
+	l.sfeqi r4,0x00                 /* Check if the load/store insn is in delay slot */
+	l.bf    jmp
+	l.sfeqi r4,0x01
+	l.bf    jmp
+	l.sfeqi r4,0x03
+	l.bf    jmp
+	l.sfeqi r4,0x04
+	l.bf    jmp
+	l.sfeqi r4,0x11
+	l.bf    jr
+	l.sfeqi r4,0x12
+	l.bf    jr
+	l.nop
+	l.j     1f
+	l.addi  r5,r5,4                 /* Increment PC to get return insn address */
+
+jmp:
+	l.slli  r4,r3,6                 /* Get the signed extended jump length */
+	l.srai  r4,r4,4
+
+	l.lwz   r3,4(r5)                /* Load the real load/store insn */
+
+	l.add   r5,r5,r4                /* Calculate jump target address */
+
+	l.j     1f
+	l.srli  r4,r3,26                /* Shift left to get the insn opcode */
+
+jr:
+	l.slli  r4,r3,9                 /* Shift to get the reg nb */
+	l.andi  r4,r4,0x7c
+
+	l.lwz   r3,4(r5)                /* Load the real load/store insn */
+
+	l.add   r4,r4,r1                /* Load the jump register value from the stack */
+	l.lwz   r5,0(r4)
+
+	l.srli  r4,r3,26                /* Shift left to get the insn opcode */
+
+
+1:
+//	  l.mtspr r0,r5,SPR_EPCR_BASE
+	l.sw	PT_PC(r1),r5
+
+	l.sfeqi r4,0x26
+	l.bf    lhs
+	l.sfeqi r4,0x25
+	l.bf    lhz
+	l.sfeqi r4,0x22
+	l.bf    lws
+	l.sfeqi r4,0x21
+	l.bf    lwz
+	l.sfeqi r4,0x37
+	l.bf    sh
+	l.sfeqi r4,0x35
+	l.bf    sw
+	l.nop
+
+1:      l.j     1b                      /* I don't know what to do */
+	l.nop
+
+lhs:    l.lbs   r5,0(r2)
+	l.slli  r5,r5,8
+	l.lbz   r6,1(r2)
+	l.or    r5,r5,r6
+	l.srli  r4,r3,19
+	l.andi  r4,r4,0x7c
+	l.add   r4,r4,r1
+	l.j     align_end
+	l.sw    0(r4),r5
+
+lhz:    l.lbz   r5,0(r2)
+	l.slli  r5,r5,8
+	l.lbz   r6,1(r2)
+	l.or    r5,r5,r6
+	l.srli  r4,r3,19
+	l.andi  r4,r4,0x7c
+	l.add   r4,r4,r1
+	l.j     align_end
+	l.sw    0(r4),r5
+
+lws:    l.lbs   r5,0(r2)
+	l.slli  r5,r5,24
+	l.lbz   r6,1(r2)
+	l.slli  r6,r6,16
+	l.or    r5,r5,r6
+	l.lbz   r6,2(r2)
+	l.slli  r6,r6,8
+	l.or    r5,r5,r6
+	l.lbz   r6,3(r2)
+	l.or    r5,r5,r6
+	l.srli  r4,r3,19
+	l.andi  r4,r4,0x7c
+	l.add   r4,r4,r1
+	l.j     align_end
+	l.sw    0(r4),r5
+
+lwz:    l.lbz   r5,0(r2)
+	l.slli  r5,r5,24
+	l.lbz   r6,1(r2)
+	l.slli  r6,r6,16
+	l.or    r5,r5,r6
+	l.lbz   r6,2(r2)
+	l.slli  r6,r6,8
+	l.or    r5,r5,r6
+	l.lbz   r6,3(r2)
+	l.or    r5,r5,r6
+	l.srli  r4,r3,19
+	l.andi  r4,r4,0x7c
+	l.add   r4,r4,r1
+	l.j     align_end
+	l.sw    0(r4),r5
+
+sh:
+	l.srli  r4,r3,9
+	l.andi  r4,r4,0x7c
+	l.add   r4,r4,r1
+	l.lwz   r5,0(r4)
+	l.sb    1(r2),r5
+	l.srli  r5,r5,8
+	l.j     align_end
+	l.sb    0(r2),r5
+
+sw:
+	l.srli  r4,r3,9
+	l.andi  r4,r4,0x7c
+	l.add   r4,r4,r1
+	l.lwz   r5,0(r4)
+	l.sb    3(r2),r5
+	l.srli  r5,r5,8
+	l.sb    2(r2),r5
+	l.srli  r5,r5,8
+	l.sb    1(r2),r5
+	l.srli  r5,r5,8
+	l.j     align_end
+	l.sb    0(r2),r5
+
+align_end:
+	l.j    _ret_from_intr
+	l.nop
+#endif
+
+/* ---[ 0x700: Illegal insn exception ]---------------------------------- */
+
+EXCEPTION_ENTRY(_illegal_instruction_handler)
+	/* r4: EA of fault (set by EXCEPTION_HANDLE) */
+	l.jal   do_illegal_instruction
+	 l.addi  r3,r1,0 /* pt_regs */
+
+	l.j     _ret_from_exception
+	 l.nop
+
+/* ---[ 0x800: External interrupt exception ]---------------------------- */
+
+EXCEPTION_ENTRY(_external_irq_handler)
+#ifdef CONFIG_OPENRISC_ESR_EXCEPTION_BUG_CHECK
+	l.lwz	r4,PT_SR(r1)		// were interrupts enabled ?
+	l.andi	r4,r4,SPR_SR_IEE
+	l.sfeqi	r4,0
+	l.bnf	1f			// ext irq enabled, all ok.
+	l.nop
+
+	l.addi  r1,r1,-0x8
+	l.movhi r3,hi(42f)
+	l.ori	r3,r3,lo(42f)
+	l.sw    0x0(r1),r3
+	l.jal   printk
+	l.sw    0x4(r1),r4
+	l.addi  r1,r1,0x8
+
+	.section .rodata, "a"
+42:
+		.string "\n\rESR interrupt bug: in _external_irq_handler (ESR %x)\n\r"
+		.align 4
+	.previous
+
+	l.ori	r4,r4,SPR_SR_IEE	// fix the bug
+//	l.sw	PT_SR(r1),r4
+1:
+#endif
+	CLEAR_LWA_FLAG(r3)
+	l.addi	r3,r1,0
+	l.movhi	r8,hi(do_IRQ)
+	l.ori	r8,r8,lo(do_IRQ)
+	l.jalr r8
+	l.nop
+	l.j    _ret_from_intr
+	l.nop
+
+/* ---[ 0x900: DTLB miss exception ]------------------------------------- */
+
+
+/* ---[ 0xa00: ITLB miss exception ]------------------------------------- */
+
+
+/* ---[ 0xb00: Range exception ]----------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0xb00,0xb00)
+
+/* ---[ 0xc00: Syscall exception ]--------------------------------------- */
+
+/*
+ * Syscalls are a special type of exception in that they are
+ * _explicitly_ invoked by userspace and can therefore be
+ * held to conform to the same ABI as normal functions with
+ * respect to whether registers are preserved across the call
+ * or not.
+ */
+
+/* Upon syscall entry we just save the callee-saved registers
+ * and not the call-clobbered ones.
+ */
+
+_string_syscall_return:
+	.string "syscall return %ld \n\r\0"
+	.align 4
+
+ENTRY(_sys_call_handler)
+	/* syscalls run with interrupts enabled */
+	ENABLE_INTERRUPTS(r29)		// enable interrupts, r29 is temp
+
+	/* r1, EPCR, ESR a already saved */
+	l.sw	PT_GPR2(r1),r2
+	/* r3-r8 must be saved because syscall restart relies
+	 * on us being able to restart the syscall args... technically
+	 * they should be clobbered, otherwise
+	 */
+	l.sw    PT_GPR3(r1),r3
+	/*
+	 * r4 already saved
+	 * r4 holds the EEAR address of the fault, use it as screatch reg and
+	 * then load the original r4
+	 */
+	CLEAR_LWA_FLAG(r4)
+	l.lwz	r4,PT_GPR4(r1)
+	l.sw    PT_GPR5(r1),r5
+	l.sw    PT_GPR6(r1),r6
+	l.sw    PT_GPR7(r1),r7
+	l.sw    PT_GPR8(r1),r8
+	l.sw    PT_GPR9(r1),r9
+	/* r10 already saved */
+	l.sw    PT_GPR11(r1),r11
+	/* orig_gpr11 must be set for syscalls */
+	l.sw    PT_ORIG_GPR11(r1),r11
+	/* r12,r13 already saved */
+
+	/* r14-r28 (even) aren't touched by the syscall fast path below
+	 * so we don't need to save them.  However, the functions that return
+	 * to userspace via a call to switch() DO need to save these because
+	 * switch() effectively clobbers them... saving these registers for
+	 * such functions is handled in their syscall wrappers (see fork, vfork,
+	 * and clone, below).
+
+	/* r30 is the only register we clobber in the fast path */
+	/* r30 already saved */
+/*	l.sw    PT_GPR30(r1),r30 */
+
+_syscall_check_trace_enter:
+	/* If TIF_SYSCALL_TRACE is set, then we want to do syscall tracing */
+	l.lwz	r30,TI_FLAGS(r10)
+	l.andi	r30,r30,_TIF_SYSCALL_TRACE
+	l.sfne	r30,r0
+	l.bf	_syscall_trace_enter
+	 l.nop
+
+_syscall_check:
+	/* Ensure that the syscall number is reasonable */
+	l.sfgeui r11,__NR_syscalls
+	l.bf	_syscall_badsys
+	 l.nop
+
+_syscall_call:
+	l.movhi r29,hi(sys_call_table)
+	l.ori   r29,r29,lo(sys_call_table)
+	l.slli  r11,r11,2
+	l.add   r29,r29,r11
+	l.lwz   r29,0(r29)
+
+	l.jalr  r29
+	 l.nop
+
+_syscall_return:
+	/* All syscalls return here... just pay attention to ret_from_fork
+	 * which does it in a round-about way.
+	 */
+	l.sw    PT_GPR11(r1),r11           // save return value
+
+#if 0
+_syscall_debug:
+	l.movhi r3,hi(_string_syscall_return)
+	l.ori   r3,r3,lo(_string_syscall_return)
+	l.ori   r27,r0,1
+	l.sw    -4(r1),r27
+	l.sw    -8(r1),r11
+	l.addi  r1,r1,-8
+	l.movhi r27,hi(printk)
+	l.ori   r27,r27,lo(printk)
+	l.jalr  r27
+	 l.nop
+	l.addi  r1,r1,8
+#endif
+
+_syscall_check_trace_leave:
+	/* r30 is a callee-saved register so this should still hold the
+	 * _TIF_SYSCALL_TRACE flag from _syscall_check_trace_enter above...
+	 * _syscall_trace_leave expects syscall result to be in pt_regs->r11.
+	 */
+	l.sfne	r30,r0
+	l.bf	_syscall_trace_leave
+	 l.nop
+
+/* This is where the exception-return code begins... interrupts need to be
+ * disabled the rest of the way here because we can't afford to miss any
+ * interrupts that set NEED_RESCHED or SIGNALPENDING... really true? */
+
+_syscall_check_work:
+	/* Here we need to disable interrupts */
+	DISABLE_INTERRUPTS(r27,r29)
+	l.lwz	r30,TI_FLAGS(r10)
+	l.andi	r30,r30,_TIF_WORK_MASK
+	l.sfne	r30,r0
+
+	l.bnf	_syscall_resume_userspace
+	 l.nop
+
+	/* Work pending follows a different return path, so we need to
+	 * make sure that all the call-saved registers get into pt_regs
+	 * before branching...
+	 */
+	l.sw    PT_GPR14(r1),r14
+	l.sw    PT_GPR16(r1),r16
+	l.sw    PT_GPR18(r1),r18
+	l.sw    PT_GPR20(r1),r20
+	l.sw    PT_GPR22(r1),r22
+	l.sw    PT_GPR24(r1),r24
+	l.sw    PT_GPR26(r1),r26
+	l.sw    PT_GPR28(r1),r28
+
+	/* _work_pending needs to be called with interrupts disabled */
+	l.j	_work_pending
+	 l.nop
+
+_syscall_resume_userspace:
+//	ENABLE_INTERRUPTS(r29)
+
+
+/* This is the hot path for returning to userspace from a syscall.  If there's
+ * work to be done and the branch to _work_pending was taken above, then the
+ * return to userspace will be done via the normal exception return path...
+ * that path restores _all_ registers and will overwrite the "clobbered"
+ * registers with whatever garbage is in pt_regs -- that's OK because those
+ * registers are clobbered anyway and because the extra work is insignificant
+ * in the context of the extra work that _work_pending is doing.
+
+/* Once again, syscalls are special and only guarantee to preserve the
+ * same registers as a normal function call */
+
+/* The assumption here is that the registers r14-r28 (even) are untouched and
+ * don't need to be restored... be sure that that's really the case!
+ */
+
+/* This is still too much... we should only be restoring what we actually
+ * clobbered... we should even be using 'scratch' (odd) regs above so that
+ * we don't need to restore anything, hardly...
+ */
+
+	l.lwz	r2,PT_GPR2(r1)
+
+	/* Restore args */
+	/* r3-r8 are technically clobbered, but syscall restart needs these
+	 * to be restored...
+	 */
+	l.lwz	r3,PT_GPR3(r1)
+	l.lwz	r4,PT_GPR4(r1)
+	l.lwz	r5,PT_GPR5(r1)
+	l.lwz	r6,PT_GPR6(r1)
+	l.lwz	r7,PT_GPR7(r1)
+	l.lwz	r8,PT_GPR8(r1)
+
+	l.lwz	r9,PT_GPR9(r1)
+	l.lwz	r10,PT_GPR10(r1)
+	l.lwz	r11,PT_GPR11(r1)
+
+	/* r30 is the only register we clobber in the fast path */
+	l.lwz	r30,PT_GPR30(r1)
+
+	/* Here we use r13-r19 (odd) as scratch regs */
+	l.lwz   r13,PT_PC(r1)
+	l.lwz   r15,PT_SR(r1)
+	l.lwz	r1,PT_SP(r1)
+	/* Interrupts need to be disabled for setting EPCR and ESR
+	 * so that another interrupt doesn't come in here and clobber
+	 * them before we can use them for our l.rfe */
+	DISABLE_INTERRUPTS(r17,r19)
+	l.mtspr r0,r13,SPR_EPCR_BASE
+	l.mtspr r0,r15,SPR_ESR_BASE
+	l.rfe
+
+/* End of hot path!
+ * Keep the below tracing and error handling out of the hot path...
+*/
+
+_syscall_trace_enter:
+	/* Here we pass pt_regs to do_syscall_trace_enter.  Make sure
+	 * that function is really getting all the info it needs as
+	 * pt_regs isn't a complete set of userspace regs, just the
+	 * ones relevant to the syscall...
+	 *
+	 * Note use of delay slot for setting argument.
+	 */
+	l.jal	do_syscall_trace_enter
+	 l.addi	r3,r1,0
+
+	/* Restore arguments (not preserved across do_syscall_trace_enter)
+	 * so that we can do the syscall for real and return to the syscall
+	 * hot path.
+	 */
+	l.lwz	r11,PT_GPR11(r1)
+	l.lwz	r3,PT_GPR3(r1)
+	l.lwz	r4,PT_GPR4(r1)
+	l.lwz	r5,PT_GPR5(r1)
+	l.lwz	r6,PT_GPR6(r1)
+	l.lwz	r7,PT_GPR7(r1)
+
+	l.j	_syscall_check
+	 l.lwz	r8,PT_GPR8(r1)
+
+_syscall_trace_leave:
+	l.jal	do_syscall_trace_leave
+	 l.addi	r3,r1,0
+
+	l.j	_syscall_check_work
+	 l.nop
+
+_syscall_badsys:
+	/* Here we effectively pretend to have executed an imaginary
+	 * syscall that returns -ENOSYS and then return to the regular
+	 * syscall hot path.
+	 * Note that "return value" is set in the delay slot...
+	 */
+	l.j	_syscall_return
+	 l.addi	r11,r0,-ENOSYS
+
+/******* END SYSCALL HANDLING *******/
+
+/* ---[ 0xd00: Trap exception ]------------------------------------------ */
+
+UNHANDLED_EXCEPTION(_vector_0xd00,0xd00)
+
+/* ---[ 0xe00: Trap exception ]------------------------------------------ */
+
+EXCEPTION_ENTRY(_trap_handler)
+	CLEAR_LWA_FLAG(r3)
+	/* r4: EA of fault (set by EXCEPTION_HANDLE) */
+	l.jal   do_trap
+	 l.addi  r3,r1,0 /* pt_regs */
+
+	l.j     _ret_from_exception
+	 l.nop
+
+/* ---[ 0xf00: Reserved exception ]-------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0xf00,0xf00)
+
+/* ---[ 0x1000: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1000,0x1000)
+
+/* ---[ 0x1100: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1100,0x1100)
+
+/* ---[ 0x1200: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1200,0x1200)
+
+/* ---[ 0x1300: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1300,0x1300)
+
+/* ---[ 0x1400: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1400,0x1400)
+
+/* ---[ 0x1500: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1500,0x1500)
+
+/* ---[ 0x1600: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1600,0x1600)
+
+/* ---[ 0x1700: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1700,0x1700)
+
+/* ---[ 0x1800: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1800,0x1800)
+
+/* ---[ 0x1900: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1900,0x1900)
+
+/* ---[ 0x1a00: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1a00,0x1a00)
+
+/* ---[ 0x1b00: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1b00,0x1b00)
+
+/* ---[ 0x1c00: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1c00,0x1c00)
+
+/* ---[ 0x1d00: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1d00,0x1d00)
+
+/* ---[ 0x1e00: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1e00,0x1e00)
+
+/* ---[ 0x1f00: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1f00,0x1f00)
+
+/* ========================================================[ return ] === */
+
+_resume_userspace:
+	DISABLE_INTERRUPTS(r3,r4)
+	l.lwz	r4,TI_FLAGS(r10)
+	l.andi	r13,r4,_TIF_WORK_MASK
+	l.sfeqi	r13,0
+	l.bf	_restore_all
+	 l.nop
+
+_work_pending:
+	l.lwz	r5,PT_ORIG_GPR11(r1)
+	l.sfltsi r5,0
+	l.bnf	1f
+	 l.nop
+	l.andi	r5,r5,0
+1:
+	l.jal	do_work_pending
+	 l.ori	r3,r1,0			/* pt_regs */
+
+	l.sfeqi	r11,0
+	l.bf	_restore_all
+	 l.nop
+	l.sfltsi r11,0
+	l.bnf	1f
+	 l.nop
+	l.and	r11,r11,r0
+	l.ori	r11,r11,__NR_restart_syscall
+	l.j	_syscall_check_trace_enter
+	 l.nop
+1:
+	l.lwz	r11,PT_ORIG_GPR11(r1)
+	/* Restore arg registers */
+	l.lwz	r3,PT_GPR3(r1)
+	l.lwz	r4,PT_GPR4(r1)
+	l.lwz	r5,PT_GPR5(r1)
+	l.lwz	r6,PT_GPR6(r1)
+	l.lwz	r7,PT_GPR7(r1)
+	l.j	_syscall_check_trace_enter
+	 l.lwz	r8,PT_GPR8(r1)
+
+_restore_all:
+	RESTORE_ALL
+	/* This returns to userspace code */
+
+
+ENTRY(_ret_from_intr)
+ENTRY(_ret_from_exception)
+	l.lwz	r4,PT_SR(r1)
+	l.andi	r3,r4,SPR_SR_SM
+	l.sfeqi	r3,0
+	l.bnf	_restore_all
+	 l.nop
+	l.j	_resume_userspace
+	 l.nop
+
+ENTRY(ret_from_fork)
+	l.jal	schedule_tail
+	 l.nop
+
+	/* Check if we are a kernel thread */
+	l.sfeqi	r20,0
+	l.bf	1f
+	 l.nop
+
+	/* ...we are a kernel thread so invoke the requested callback */
+	l.jalr	r20
+	 l.or	r3,r22,r0
+
+1:
+	/* _syscall_returns expect r11 to contain return value */
+	l.lwz	r11,PT_GPR11(r1)
+
+	/* The syscall fast path return expects call-saved registers
+	 * r12-r28 to be untouched, so we restore them here as they
+	 * will have been effectively clobbered when arriving here
+	 * via the call to switch()
+	 */
+	l.lwz	r12,PT_GPR12(r1)
+	l.lwz	r14,PT_GPR14(r1)
+	l.lwz	r16,PT_GPR16(r1)
+	l.lwz	r18,PT_GPR18(r1)
+	l.lwz	r20,PT_GPR20(r1)
+	l.lwz	r22,PT_GPR22(r1)
+	l.lwz	r24,PT_GPR24(r1)
+	l.lwz	r26,PT_GPR26(r1)
+	l.lwz	r28,PT_GPR28(r1)
+
+	l.j	_syscall_return
+	 l.nop
+
+/* ========================================================[ switch ] === */
+
+/*
+ * This routine switches between two different tasks.  The process
+ * state of one is saved on its kernel stack.  Then the state
+ * of the other is restored from its kernel stack.  The memory
+ * management hardware is updated to the second process's state.
+ * Finally, we can return to the second process, via the 'return'.
+ *
+ * Note: there are two ways to get to the "going out" portion
+ * of this code; either by coming in via the entry (_switch)
+ * or via "fork" which must set up an environment equivalent
+ * to the "_switch" path.  If you change this (or in particular, the
+ * SAVE_REGS macro), you'll have to change the fork code also.
+ */
+
+
+/* _switch MUST never lay on page boundry, cause it runs from
+ * effective addresses and beeing interrupted by iTLB miss would kill it.
+ * dTLB miss seams to never accour in the bad place since data accesses
+ * are from task structures which are always page aligned.
+ *
+ * The problem happens in RESTORE_ALL_NO_R11 where we first set the EPCR
+ * register, then load the previous register values and only at the end call
+ * the l.rfe instruction. If get TLB miss in beetwen the EPCR register gets
+ * garbled and we end up calling l.rfe with the wrong EPCR. (same probably
+ * holds for ESR)
+ *
+ * To avoid this problems it is sufficient to align _switch to
+ * some nice round number smaller than it's size...
+ */
+
+/* ABI rules apply here... we either enter _switch via schedule() or via
+ * an imaginary call to which we shall return at return_from_fork.  Either
+ * way, we are a function call and only need to preserve the callee-saved
+ * registers when we return.  As such, we don't need to save the registers
+ * on the stack that we won't be returning as they were...
+ */
+
+	.align 0x400
+ENTRY(_switch)
+	/* We don't store SR as _switch only gets called in a context where
+	 * the SR will be the same going in and coming out... */
+
+	/* Set up new pt_regs struct for saving task state */
+	l.addi  r1,r1,-(INT_FRAME_SIZE)
+
+	/* No need to store r1/PT_SP as it goes into KSP below */
+	l.sw    PT_GPR2(r1),r2
+	l.sw    PT_GPR9(r1),r9
+	/* This is wrong, r12 shouldn't be here... but GCC is broken for the time being
+	 * and expects r12 to be callee-saved... */
+	l.sw    PT_GPR12(r1),r12
+	l.sw    PT_GPR14(r1),r14
+	l.sw    PT_GPR16(r1),r16
+	l.sw    PT_GPR18(r1),r18
+	l.sw    PT_GPR20(r1),r20
+	l.sw    PT_GPR22(r1),r22
+	l.sw    PT_GPR24(r1),r24
+	l.sw    PT_GPR26(r1),r26
+	l.sw    PT_GPR28(r1),r28
+	l.sw    PT_GPR30(r1),r30
+
+	l.addi	r11,r10,0			/* Save old 'current' to 'last' return value*/
+
+	/* We use thread_info->ksp for storing the address of the above
+	 * structure so that we can get back to it later... we don't want
+	 * to lose the value of thread_info->ksp, though, so store it as
+	 * pt_regs->sp so that we can easily restore it when we are made
+	 * live again...
+	 */
+
+	/* Save the old value of thread_info->ksp as pt_regs->sp */
+	l.lwz	r29,TI_KSP(r10)
+	l.sw	PT_SP(r1),r29
+
+	/* Swap kernel stack pointers */
+	l.sw    TI_KSP(r10),r1			/* Save old stack pointer */
+	l.or	r10,r4,r0			/* Set up new current_thread_info */
+	l.lwz   r1,TI_KSP(r10)			/* Load new stack pointer */
+
+	/* Restore the old value of thread_info->ksp */
+	l.lwz	r29,PT_SP(r1)
+	l.sw	TI_KSP(r10),r29
+
+	/* ...and restore the registers, except r11 because the return value
+	 * has already been set above.
+	 */
+	l.lwz   r2,PT_GPR2(r1)
+	l.lwz   r9,PT_GPR9(r1)
+	/* No need to restore r10 */
+	/* ...and do not restore r11 */
+
+	/* This is wrong, r12 shouldn't be here... but GCC is broken for the time being
+	 * and expects r12 to be callee-saved... */
+	l.lwz   r12,PT_GPR12(r1)
+	l.lwz   r14,PT_GPR14(r1)
+	l.lwz   r16,PT_GPR16(r1)
+	l.lwz   r18,PT_GPR18(r1)
+	l.lwz   r20,PT_GPR20(r1)
+	l.lwz   r22,PT_GPR22(r1)
+	l.lwz   r24,PT_GPR24(r1)
+	l.lwz   r26,PT_GPR26(r1)
+	l.lwz   r28,PT_GPR28(r1)
+	l.lwz   r30,PT_GPR30(r1)
+
+	/* Unwind stack to pre-switch state */
+	l.addi  r1,r1,(INT_FRAME_SIZE)
+
+	/* Return via the link-register back to where we 'came from', where
+	 * that may be either schedule(), ret_from_fork(), or
+	 * ret_from_kernel_thread().  If we are returning to a new thread,
+	 * we are expected to have set up the arg to schedule_tail already,
+	 * hence we do so here unconditionally:
+	 */
+	l.lwz   r3,TI_TASK(r3)		/* Load 'prev' as schedule_tail arg */
+	l.jr	r9
+	 l.nop
+
+/* ==================================================================== */
+
+/* These all use the delay slot for setting the argument register, so the
+ * jump is always happening after the l.addi instruction.
+ *
+ * These are all just wrappers that don't touch the link-register r9, so the
+ * return from the "real" syscall function will return back to the syscall
+ * code that did the l.jal that brought us here.
+ */
+
+/* fork requires that we save all the callee-saved registers because they
+ * are all effectively clobbered by the call to _switch.  Here we store
+ * all the registers that aren't touched by the syscall fast path and thus
+ * weren't saved there.
+ */
+
+_fork_save_extra_regs_and_call:
+	l.sw    PT_GPR14(r1),r14
+	l.sw    PT_GPR16(r1),r16
+	l.sw    PT_GPR18(r1),r18
+	l.sw    PT_GPR20(r1),r20
+	l.sw    PT_GPR22(r1),r22
+	l.sw    PT_GPR24(r1),r24
+	l.sw    PT_GPR26(r1),r26
+	l.jr	r29
+	 l.sw    PT_GPR28(r1),r28
+
+ENTRY(__sys_clone)
+	l.movhi	r29,hi(sys_clone)
+	l.ori	r29,r29,lo(sys_clone)
+	l.j	_fork_save_extra_regs_and_call
+	 l.nop
+
+ENTRY(__sys_fork)
+	l.movhi	r29,hi(sys_fork)
+	l.ori	r29,r29,lo(sys_fork)
+	l.j	_fork_save_extra_regs_and_call
+	 l.nop
+
+ENTRY(sys_rt_sigreturn)
+	l.jal	_sys_rt_sigreturn
+	 l.addi	r3,r1,0
+	l.sfne	r30,r0
+	l.bnf	_no_syscall_trace
+	 l.nop
+	l.jal	do_syscall_trace_leave
+	 l.addi	r3,r1,0
+_no_syscall_trace:
+	l.j	_resume_userspace
+	 l.nop
+
+/* This is a catch-all syscall for atomic instructions for the OpenRISC 1000.
+ * The functions takes a variable number of parameters depending on which
+ * particular flavour of atomic you want... parameter 1 is a flag identifying
+ * the atomic in question.  Currently, this function implements the
+ * following variants:
+ *
+ * XCHG:
+ *  @flag: 1
+ *  @ptr1:
+ *  @ptr2:
+ * Atomically exchange the values in pointers 1 and 2.
+ *
+ */
+
+ENTRY(sys_or1k_atomic)
+	/* FIXME: This ignores r3 and always does an XCHG */
+	DISABLE_INTERRUPTS(r17,r19)
+	l.lwz	r29,0(r4)
+	l.lwz	r27,0(r5)
+	l.sw	0(r4),r27
+	l.sw	0(r5),r29
+	ENABLE_INTERRUPTS(r17)
+	l.jr	r9
+	 l.or	r11,r0,r0
+
+/* ============================================================[ EOF ]=== */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/head.S b/src/kernel/linux/v4.14/arch/openrisc/kernel/head.S
new file mode 100644
index 0000000..4d878d1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/head.S
@@ -0,0 +1,1571 @@
+/*
+ * OpenRISC head.S
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/linkage.h>
+#include <linux/threads.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/serial_reg.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/thread_info.h>
+#include <asm/cache.h>
+#include <asm/spr_defs.h>
+#include <asm/asm-offsets.h>
+#include <linux/of_fdt.h>
+
+#define tophys(rd,rs)				\
+	l.movhi	rd,hi(-KERNELBASE)		;\
+	l.add	rd,rd,rs
+
+#define CLEAR_GPR(gpr)				\
+	l.movhi	gpr,0x0
+
+#define LOAD_SYMBOL_2_GPR(gpr,symbol)		\
+	l.movhi gpr,hi(symbol)			;\
+	l.ori   gpr,gpr,lo(symbol)
+
+
+#define UART_BASE_ADD      0x90000000
+
+#define EXCEPTION_SR  (SPR_SR_DME | SPR_SR_IME | SPR_SR_DCE | SPR_SR_ICE | SPR_SR_SM)
+#define SYSCALL_SR  (SPR_SR_DME | SPR_SR_IME | SPR_SR_DCE | SPR_SR_ICE | SPR_SR_IEE | SPR_SR_TEE | SPR_SR_SM)
+
+/* ============================================[ tmp store locations ]=== */
+
+/*
+ * emergency_print temporary stores
+ */
+#define EMERGENCY_PRINT_STORE_GPR4	l.sw    0x20(r0),r4
+#define EMERGENCY_PRINT_LOAD_GPR4	l.lwz   r4,0x20(r0)
+
+#define EMERGENCY_PRINT_STORE_GPR5	l.sw    0x24(r0),r5
+#define EMERGENCY_PRINT_LOAD_GPR5	l.lwz   r5,0x24(r0)
+
+#define EMERGENCY_PRINT_STORE_GPR6	l.sw    0x28(r0),r6
+#define EMERGENCY_PRINT_LOAD_GPR6	l.lwz   r6,0x28(r0)
+
+#define EMERGENCY_PRINT_STORE_GPR7	l.sw    0x2c(r0),r7
+#define EMERGENCY_PRINT_LOAD_GPR7	l.lwz   r7,0x2c(r0)
+
+#define EMERGENCY_PRINT_STORE_GPR8	l.sw    0x30(r0),r8
+#define EMERGENCY_PRINT_LOAD_GPR8	l.lwz   r8,0x30(r0)
+
+#define EMERGENCY_PRINT_STORE_GPR9	l.sw    0x34(r0),r9
+#define EMERGENCY_PRINT_LOAD_GPR9	l.lwz   r9,0x34(r0)
+
+
+/*
+ * TLB miss handlers temorary stores
+ */
+#define EXCEPTION_STORE_GPR9		l.sw    0x10(r0),r9
+#define EXCEPTION_LOAD_GPR9		l.lwz   r9,0x10(r0)
+
+#define EXCEPTION_STORE_GPR2		l.sw    0x64(r0),r2
+#define EXCEPTION_LOAD_GPR2		l.lwz   r2,0x64(r0)
+
+#define EXCEPTION_STORE_GPR3		l.sw    0x68(r0),r3
+#define EXCEPTION_LOAD_GPR3		l.lwz   r3,0x68(r0)
+
+#define EXCEPTION_STORE_GPR4		l.sw    0x6c(r0),r4
+#define EXCEPTION_LOAD_GPR4		l.lwz   r4,0x6c(r0)
+
+#define EXCEPTION_STORE_GPR5		l.sw    0x70(r0),r5
+#define EXCEPTION_LOAD_GPR5		l.lwz   r5,0x70(r0)
+
+#define EXCEPTION_STORE_GPR6		l.sw    0x74(r0),r6
+#define EXCEPTION_LOAD_GPR6		l.lwz   r6,0x74(r0)
+
+
+/*
+ * EXCEPTION_HANDLE temporary stores
+ */
+
+#define EXCEPTION_T_STORE_GPR30		l.sw    0x78(r0),r30
+#define EXCEPTION_T_LOAD_GPR30(reg)	l.lwz   reg,0x78(r0)
+
+#define EXCEPTION_T_STORE_GPR10		l.sw    0x7c(r0),r10
+#define EXCEPTION_T_LOAD_GPR10(reg)	l.lwz   reg,0x7c(r0)
+
+#define EXCEPTION_T_STORE_SP		l.sw	0x80(r0),r1
+#define EXCEPTION_T_LOAD_SP(reg)	l.lwz   reg,0x80(r0)
+
+/*
+ * For UNHANLDED_EXCEPTION
+ */
+
+#define EXCEPTION_T_STORE_GPR31		l.sw    0x84(r0),r31
+#define EXCEPTION_T_LOAD_GPR31(reg)	l.lwz   reg,0x84(r0)
+
+/* =========================================================[ macros ]=== */
+
+
+#define GET_CURRENT_PGD(reg,t1)					\
+	LOAD_SYMBOL_2_GPR(reg,current_pgd)			;\
+	tophys  (t1,reg)					;\
+	l.lwz   reg,0(t1)
+
+
+/*
+ * DSCR: this is a common hook for handling exceptions. it will save
+ *       the needed registers, set up stack and pointer to current
+ *	 then jump to the handler while enabling MMU
+ *
+ * PRMS: handler	- a function to jump to. it has to save the
+ *			remaining registers to kernel stack, call
+ *			appropriate arch-independant exception handler
+ *			and finaly jump to ret_from_except
+ *
+ * PREQ: unchanged state from the time exception happened
+ *
+ * POST: SAVED the following registers original value
+ *	       to the new created exception frame pointed to by r1
+ *
+ *	 r1  - ksp	pointing to the new (exception) frame
+ *	 r4  - EEAR     exception EA
+ *	 r10 - current	pointing to current_thread_info struct
+ *	 r12 - syscall  0, since we didn't come from syscall
+ *	 r30 - handler	address of the handler we'll jump to
+ *
+ *	 handler has to save remaining registers to the exception
+ *	 ksp frame *before* tainting them!
+ *
+ * NOTE: this function is not reentrant per se. reentrancy is guaranteed
+ *       by processor disabling all exceptions/interrupts when exception
+ *	 accours.
+ *
+ * OPTM: no need to make it so wasteful to extract ksp when in user mode
+ */
+
+#define EXCEPTION_HANDLE(handler)				\
+	EXCEPTION_T_STORE_GPR30					;\
+	l.mfspr r30,r0,SPR_ESR_BASE				;\
+	l.andi  r30,r30,SPR_SR_SM				;\
+	l.sfeqi r30,0						;\
+	EXCEPTION_T_STORE_GPR10					;\
+	l.bnf   2f                            /* kernel_mode */	;\
+	 EXCEPTION_T_STORE_SP                 /* delay slot */	;\
+1: /* user_mode:   */						;\
+	LOAD_SYMBOL_2_GPR(r1,current_thread_info_set)		;\
+	tophys  (r30,r1)					;\
+	/* r10: current_thread_info  */				;\
+	l.lwz   r10,0(r30)					;\
+	tophys  (r30,r10)					;\
+	l.lwz   r1,(TI_KSP)(r30)				;\
+	/* fall through */					;\
+2: /* kernel_mode: */						;\
+	/* create new stack frame, save only needed gprs */	;\
+	/* r1: KSP, r10: current, r4: EEAR, r31: __pa(KSP) */	;\
+	/* r12:	temp, syscall indicator */			;\
+	l.addi  r1,r1,-(INT_FRAME_SIZE)				;\
+	/* r1 is KSP, r30 is __pa(KSP) */			;\
+	tophys  (r30,r1)					;\
+	l.sw    PT_GPR12(r30),r12				;\
+	/* r4 use for tmp before EA */				;\
+	l.mfspr r12,r0,SPR_EPCR_BASE				;\
+	l.sw    PT_PC(r30),r12					;\
+	l.mfspr r12,r0,SPR_ESR_BASE				;\
+	l.sw    PT_SR(r30),r12					;\
+	/* save r30 */						;\
+	EXCEPTION_T_LOAD_GPR30(r12)				;\
+	l.sw	PT_GPR30(r30),r12				;\
+	/* save r10 as was prior to exception */		;\
+	EXCEPTION_T_LOAD_GPR10(r12)				;\
+	l.sw	PT_GPR10(r30),r12				;\
+	/* save PT_SP as was prior to exception */		;\
+	EXCEPTION_T_LOAD_SP(r12)				;\
+	l.sw	PT_SP(r30),r12					;\
+	/* save exception r4, set r4 = EA */			;\
+	l.sw	PT_GPR4(r30),r4					;\
+	l.mfspr r4,r0,SPR_EEAR_BASE				;\
+	/* r12 == 1 if we come from syscall */			;\
+	CLEAR_GPR(r12)						;\
+	/* ----- turn on MMU ----- */				;\
+	/* Carry DSX into exception SR */			;\
+	l.mfspr r30,r0,SPR_SR					;\
+	l.andi	r30,r30,SPR_SR_DSX				;\
+	l.ori	r30,r30,(EXCEPTION_SR)				;\
+	l.mtspr	r0,r30,SPR_ESR_BASE				;\
+	/* r30:	EA address of handler */			;\
+	LOAD_SYMBOL_2_GPR(r30,handler)				;\
+	l.mtspr r0,r30,SPR_EPCR_BASE				;\
+	l.rfe
+
+/*
+ * this doesn't work
+ *
+ *
+ * #ifdef CONFIG_JUMP_UPON_UNHANDLED_EXCEPTION
+ * #define UNHANDLED_EXCEPTION(handler)				\
+ *	l.ori   r3,r0,0x1					;\
+ *	l.mtspr r0,r3,SPR_SR					;\
+ *      l.movhi r3,hi(0xf0000100)				;\
+ *      l.ori   r3,r3,lo(0xf0000100)				;\
+ *	l.jr	r3						;\
+ *	l.nop	1
+ *
+ * #endif
+ */
+
+/* DSCR: this is the same as EXCEPTION_HANDLE(), we are just
+ *       a bit more carefull (if we have a PT_SP or current pointer
+ *       corruption) and set them up from 'current_set'
+ *
+ */
+#define UNHANDLED_EXCEPTION(handler)				\
+	EXCEPTION_T_STORE_GPR31					;\
+	EXCEPTION_T_STORE_GPR10					;\
+	EXCEPTION_T_STORE_SP					;\
+	/* temporary store r3, r9 into r1, r10 */		;\
+	l.addi	r1,r3,0x0					;\
+	l.addi	r10,r9,0x0					;\
+	/* the string referenced by r3 must be low enough */	;\
+	l.jal	_emergency_print				;\
+	l.ori	r3,r0,lo(_string_unhandled_exception)		;\
+	l.mfspr	r3,r0,SPR_NPC					;\
+	l.jal	_emergency_print_nr				;\
+	l.andi	r3,r3,0x1f00					;\
+	/* the string referenced by r3 must be low enough */	;\
+	l.jal	_emergency_print				;\
+	l.ori	r3,r0,lo(_string_epc_prefix)			;\
+	l.jal	_emergency_print_nr				;\
+	l.mfspr	r3,r0,SPR_EPCR_BASE				;\
+	l.jal	_emergency_print				;\
+	l.ori	r3,r0,lo(_string_nl)				;\
+	/* end of printing */					;\
+	l.addi	r3,r1,0x0					;\
+	l.addi	r9,r10,0x0					;\
+	/* extract current, ksp from current_set */		;\
+	LOAD_SYMBOL_2_GPR(r1,_unhandled_stack_top)		;\
+	LOAD_SYMBOL_2_GPR(r10,init_thread_union)		;\
+	/* create new stack frame, save only needed gprs */	;\
+	/* r1: KSP, r10: current, r31: __pa(KSP) */		;\
+	/* r12:	temp, syscall indicator, r13 temp */		;\
+	l.addi  r1,r1,-(INT_FRAME_SIZE)				;\
+	/* r1 is KSP, r31 is __pa(KSP) */			;\
+	tophys  (r31,r1)					;\
+	l.sw    PT_GPR12(r31),r12					;\
+	l.mfspr r12,r0,SPR_EPCR_BASE				;\
+	l.sw    PT_PC(r31),r12					;\
+	l.mfspr r12,r0,SPR_ESR_BASE				;\
+	l.sw    PT_SR(r31),r12					;\
+	/* save r31 */						;\
+	EXCEPTION_T_LOAD_GPR31(r12)				;\
+	l.sw	PT_GPR31(r31),r12					;\
+	/* save r10 as was prior to exception */		;\
+	EXCEPTION_T_LOAD_GPR10(r12)				;\
+	l.sw	PT_GPR10(r31),r12					;\
+	/* save PT_SP as was prior to exception */			;\
+	EXCEPTION_T_LOAD_SP(r12)				;\
+	l.sw	PT_SP(r31),r12					;\
+	l.sw    PT_GPR13(r31),r13					;\
+	/* --> */						;\
+	/* save exception r4, set r4 = EA */			;\
+	l.sw	PT_GPR4(r31),r4					;\
+	l.mfspr r4,r0,SPR_EEAR_BASE				;\
+	/* r12 == 1 if we come from syscall */			;\
+	CLEAR_GPR(r12)						;\
+	/* ----- play a MMU trick ----- */			;\
+	l.ori	r31,r0,(EXCEPTION_SR)				;\
+	l.mtspr	r0,r31,SPR_ESR_BASE				;\
+	/* r31:	EA address of handler */			;\
+	LOAD_SYMBOL_2_GPR(r31,handler)				;\
+	l.mtspr r0,r31,SPR_EPCR_BASE				;\
+	l.rfe
+
+/* =====================================================[ exceptions] === */
+
+/* ---[ 0x100: RESET exception ]----------------------------------------- */
+    .org 0x100
+	/* Jump to .init code at _start which lives in the .head section
+	 * and will be discarded after boot.
+	 */
+	LOAD_SYMBOL_2_GPR(r15, _start)
+	tophys	(r13,r15)			/* MMU disabled */
+	l.jr	r13
+	 l.nop
+
+/* ---[ 0x200: BUS exception ]------------------------------------------- */
+    .org 0x200
+_dispatch_bus_fault:
+	EXCEPTION_HANDLE(_bus_fault_handler)
+
+/* ---[ 0x300: Data Page Fault exception ]------------------------------- */
+    .org 0x300
+_dispatch_do_dpage_fault:
+//      totaly disable timer interrupt
+// 	l.mtspr	r0,r0,SPR_TTMR
+//	DEBUG_TLB_PROBE(0x300)
+//	EXCEPTION_DEBUG_VALUE_ER_ENABLED(0x300)
+	EXCEPTION_HANDLE(_data_page_fault_handler)
+
+/* ---[ 0x400: Insn Page Fault exception ]------------------------------- */
+    .org 0x400
+_dispatch_do_ipage_fault:
+//      totaly disable timer interrupt
+//	l.mtspr	r0,r0,SPR_TTMR
+//	DEBUG_TLB_PROBE(0x400)
+//	EXCEPTION_DEBUG_VALUE_ER_ENABLED(0x400)
+	EXCEPTION_HANDLE(_insn_page_fault_handler)
+
+/* ---[ 0x500: Timer exception ]----------------------------------------- */
+    .org 0x500
+	EXCEPTION_HANDLE(_timer_handler)
+
+/* ---[ 0x600: Alignment exception ]-------------------------------------- */
+    .org 0x600
+	EXCEPTION_HANDLE(_alignment_handler)
+
+/* ---[ 0x700: Illegal insn exception ]---------------------------------- */
+    .org 0x700
+	EXCEPTION_HANDLE(_illegal_instruction_handler)
+
+/* ---[ 0x800: External interrupt exception ]---------------------------- */
+    .org 0x800
+	EXCEPTION_HANDLE(_external_irq_handler)
+
+/* ---[ 0x900: DTLB miss exception ]------------------------------------- */
+    .org 0x900
+	l.j	boot_dtlb_miss_handler
+	l.nop
+
+/* ---[ 0xa00: ITLB miss exception ]------------------------------------- */
+    .org 0xa00
+	l.j	boot_itlb_miss_handler
+	l.nop
+
+/* ---[ 0xb00: Range exception ]----------------------------------------- */
+    .org 0xb00
+	UNHANDLED_EXCEPTION(_vector_0xb00)
+
+/* ---[ 0xc00: Syscall exception ]--------------------------------------- */
+    .org 0xc00
+	EXCEPTION_HANDLE(_sys_call_handler)
+
+/* ---[ 0xd00: Trap exception ]------------------------------------------ */
+    .org 0xd00
+	UNHANDLED_EXCEPTION(_vector_0xd00)
+
+/* ---[ 0xe00: Trap exception ]------------------------------------------ */
+    .org 0xe00
+//	UNHANDLED_EXCEPTION(_vector_0xe00)
+	EXCEPTION_HANDLE(_trap_handler)
+
+/* ---[ 0xf00: Reserved exception ]-------------------------------------- */
+    .org 0xf00
+	UNHANDLED_EXCEPTION(_vector_0xf00)
+
+/* ---[ 0x1000: Reserved exception ]------------------------------------- */
+    .org 0x1000
+	UNHANDLED_EXCEPTION(_vector_0x1000)
+
+/* ---[ 0x1100: Reserved exception ]------------------------------------- */
+    .org 0x1100
+	UNHANDLED_EXCEPTION(_vector_0x1100)
+
+/* ---[ 0x1200: Reserved exception ]------------------------------------- */
+    .org 0x1200
+	UNHANDLED_EXCEPTION(_vector_0x1200)
+
+/* ---[ 0x1300: Reserved exception ]------------------------------------- */
+    .org 0x1300
+	UNHANDLED_EXCEPTION(_vector_0x1300)
+
+/* ---[ 0x1400: Reserved exception ]------------------------------------- */
+    .org 0x1400
+	UNHANDLED_EXCEPTION(_vector_0x1400)
+
+/* ---[ 0x1500: Reserved exception ]------------------------------------- */
+    .org 0x1500
+	UNHANDLED_EXCEPTION(_vector_0x1500)
+
+/* ---[ 0x1600: Reserved exception ]------------------------------------- */
+    .org 0x1600
+	UNHANDLED_EXCEPTION(_vector_0x1600)
+
+/* ---[ 0x1700: Reserved exception ]------------------------------------- */
+    .org 0x1700
+	UNHANDLED_EXCEPTION(_vector_0x1700)
+
+/* ---[ 0x1800: Reserved exception ]------------------------------------- */
+    .org 0x1800
+	UNHANDLED_EXCEPTION(_vector_0x1800)
+
+/* ---[ 0x1900: Reserved exception ]------------------------------------- */
+    .org 0x1900
+	UNHANDLED_EXCEPTION(_vector_0x1900)
+
+/* ---[ 0x1a00: Reserved exception ]------------------------------------- */
+    .org 0x1a00
+	UNHANDLED_EXCEPTION(_vector_0x1a00)
+
+/* ---[ 0x1b00: Reserved exception ]------------------------------------- */
+    .org 0x1b00
+	UNHANDLED_EXCEPTION(_vector_0x1b00)
+
+/* ---[ 0x1c00: Reserved exception ]------------------------------------- */
+    .org 0x1c00
+	UNHANDLED_EXCEPTION(_vector_0x1c00)
+
+/* ---[ 0x1d00: Reserved exception ]------------------------------------- */
+    .org 0x1d00
+	UNHANDLED_EXCEPTION(_vector_0x1d00)
+
+/* ---[ 0x1e00: Reserved exception ]------------------------------------- */
+    .org 0x1e00
+	UNHANDLED_EXCEPTION(_vector_0x1e00)
+
+/* ---[ 0x1f00: Reserved exception ]------------------------------------- */
+    .org 0x1f00
+	UNHANDLED_EXCEPTION(_vector_0x1f00)
+
+    .org 0x2000
+/* ===================================================[ kernel start ]=== */
+
+/*    .text*/
+
+/* This early stuff belongs in HEAD, but some of the functions below definitely
+ * don't... */
+
+	__HEAD
+	.global _start
+_start:
+	/* Init r0 to zero as per spec */
+	CLEAR_GPR(r0)
+
+	/* save kernel parameters */
+	l.or	r25,r0,r3	/* pointer to fdt */
+
+	/*
+	 * ensure a deterministic start
+	 */
+
+	l.ori	r3,r0,0x1
+	l.mtspr	r0,r3,SPR_SR
+
+	CLEAR_GPR(r1)
+	CLEAR_GPR(r2)
+	CLEAR_GPR(r3)
+	CLEAR_GPR(r4)
+	CLEAR_GPR(r5)
+	CLEAR_GPR(r6)
+	CLEAR_GPR(r7)
+	CLEAR_GPR(r8)
+	CLEAR_GPR(r9)
+	CLEAR_GPR(r10)
+	CLEAR_GPR(r11)
+	CLEAR_GPR(r12)
+	CLEAR_GPR(r13)
+	CLEAR_GPR(r14)
+	CLEAR_GPR(r15)
+	CLEAR_GPR(r16)
+	CLEAR_GPR(r17)
+	CLEAR_GPR(r18)
+	CLEAR_GPR(r19)
+	CLEAR_GPR(r20)
+	CLEAR_GPR(r21)
+	CLEAR_GPR(r22)
+	CLEAR_GPR(r23)
+	CLEAR_GPR(r24)
+	CLEAR_GPR(r26)
+	CLEAR_GPR(r27)
+	CLEAR_GPR(r28)
+	CLEAR_GPR(r29)
+	CLEAR_GPR(r30)
+	CLEAR_GPR(r31)
+
+	/*
+	 * set up initial ksp and current
+	 */
+	/* setup kernel stack */
+	LOAD_SYMBOL_2_GPR(r1,init_thread_union + THREAD_SIZE)
+	LOAD_SYMBOL_2_GPR(r10,init_thread_union)	// setup current
+	tophys	(r31,r10)
+	l.sw	TI_KSP(r31), r1
+
+	l.ori	r4,r0,0x0
+
+
+	/*
+	 * .data contains initialized data,
+	 * .bss contains uninitialized data - clear it up
+	 */
+clear_bss:
+	LOAD_SYMBOL_2_GPR(r24, __bss_start)
+	LOAD_SYMBOL_2_GPR(r26, _end)
+	tophys(r28,r24)
+	tophys(r30,r26)
+	CLEAR_GPR(r24)
+	CLEAR_GPR(r26)
+1:
+	l.sw    (0)(r28),r0
+	l.sfltu r28,r30
+	l.bf    1b
+	l.addi  r28,r28,4
+
+enable_ic:
+	l.jal	_ic_enable
+	 l.nop
+
+enable_dc:
+	l.jal	_dc_enable
+	 l.nop
+
+flush_tlb:
+	l.jal	_flush_tlb
+	 l.nop
+
+/* The MMU needs to be enabled before or32_early_setup is called */
+
+enable_mmu:
+	/*
+	 * enable dmmu & immu
+	 * SR[5] = 0, SR[6] = 0, 6th and 7th bit of SR set to 0
+	 */
+	l.mfspr	r30,r0,SPR_SR
+	l.movhi	r28,hi(SPR_SR_DME | SPR_SR_IME)
+	l.ori	r28,r28,lo(SPR_SR_DME | SPR_SR_IME)
+	l.or	r30,r30,r28
+	l.mtspr	r0,r30,SPR_SR
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+
+	// reset the simulation counters
+	l.nop 5
+
+	/* check fdt header magic word */
+	l.lwz	r3,0(r25)	/* load magic from fdt into r3 */
+	l.movhi	r4,hi(OF_DT_HEADER)
+	l.ori	r4,r4,lo(OF_DT_HEADER)
+	l.sfeq	r3,r4
+	l.bf	_fdt_found
+	 l.nop
+	/* magic number mismatch, set fdt pointer to null */
+	l.or	r25,r0,r0
+_fdt_found:
+	/* pass fdt pointer to or32_early_setup in r3 */
+	l.or	r3,r0,r25
+	LOAD_SYMBOL_2_GPR(r24, or32_early_setup)
+	l.jalr r24
+	 l.nop
+
+clear_regs:
+	/*
+	 * clear all GPRS to increase determinism
+	 */
+	CLEAR_GPR(r2)
+	CLEAR_GPR(r3)
+	CLEAR_GPR(r4)
+	CLEAR_GPR(r5)
+	CLEAR_GPR(r6)
+	CLEAR_GPR(r7)
+	CLEAR_GPR(r8)
+	CLEAR_GPR(r9)
+	CLEAR_GPR(r11)
+	CLEAR_GPR(r12)
+	CLEAR_GPR(r13)
+	CLEAR_GPR(r14)
+	CLEAR_GPR(r15)
+	CLEAR_GPR(r16)
+	CLEAR_GPR(r17)
+	CLEAR_GPR(r18)
+	CLEAR_GPR(r19)
+	CLEAR_GPR(r20)
+	CLEAR_GPR(r21)
+	CLEAR_GPR(r22)
+	CLEAR_GPR(r23)
+	CLEAR_GPR(r24)
+	CLEAR_GPR(r25)
+	CLEAR_GPR(r26)
+	CLEAR_GPR(r27)
+	CLEAR_GPR(r28)
+	CLEAR_GPR(r29)
+	CLEAR_GPR(r30)
+	CLEAR_GPR(r31)
+
+jump_start_kernel:
+	/*
+	 * jump to kernel entry (start_kernel)
+	 */
+	LOAD_SYMBOL_2_GPR(r30, start_kernel)
+	l.jr    r30
+	 l.nop
+
+_flush_tlb:
+	/*
+	 *  I N V A L I D A T E   T L B   e n t r i e s
+	 */
+	LOAD_SYMBOL_2_GPR(r5,SPR_DTLBMR_BASE(0))
+	LOAD_SYMBOL_2_GPR(r6,SPR_ITLBMR_BASE(0))
+	l.addi	r7,r0,128 /* Maximum number of sets */
+1:
+	l.mtspr	r5,r0,0x0
+	l.mtspr	r6,r0,0x0
+
+	l.addi	r5,r5,1
+	l.addi	r6,r6,1
+	l.sfeq	r7,r0
+	l.bnf	1b
+	 l.addi	r7,r7,-1
+
+	l.jr	r9
+	 l.nop
+
+/* ========================================[ cache ]=== */
+
+	/* alignment here so we don't change memory offsets with
+	 * memory controller defined
+	 */
+	.align 0x2000
+
+_ic_enable:
+	/* Check if IC present and skip enabling otherwise */
+	l.mfspr r24,r0,SPR_UPR
+	l.andi  r26,r24,SPR_UPR_ICP
+	l.sfeq  r26,r0
+	l.bf	9f
+	l.nop
+
+	/* Disable IC */
+	l.mfspr r6,r0,SPR_SR
+	l.addi  r5,r0,-1
+	l.xori  r5,r5,SPR_SR_ICE
+	l.and   r5,r6,r5
+	l.mtspr r0,r5,SPR_SR
+
+	/* Establish cache block size
+	   If BS=0, 16;
+	   If BS=1, 32;
+	   r14 contain block size
+	*/
+	l.mfspr r24,r0,SPR_ICCFGR
+	l.andi	r26,r24,SPR_ICCFGR_CBS
+	l.srli	r28,r26,7
+	l.ori	r30,r0,16
+	l.sll	r14,r30,r28
+
+	/* Establish number of cache sets
+	   r16 contains number of cache sets
+	   r28 contains log(# of cache sets)
+	*/
+	l.andi  r26,r24,SPR_ICCFGR_NCS
+	l.srli 	r28,r26,3
+	l.ori   r30,r0,1
+	l.sll   r16,r30,r28
+
+	/* Invalidate IC */
+	l.addi  r6,r0,0
+	l.sll   r5,r14,r28
+//        l.mul   r5,r14,r16
+//	l.trap  1
+//	l.addi  r5,r0,IC_SIZE
+1:
+	l.mtspr r0,r6,SPR_ICBIR
+	l.sfne  r6,r5
+	l.bf    1b
+	l.add   r6,r6,r14
+ //       l.addi   r6,r6,IC_LINE
+
+	/* Enable IC */
+	l.mfspr r6,r0,SPR_SR
+	l.ori   r6,r6,SPR_SR_ICE
+	l.mtspr r0,r6,SPR_SR
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+9:
+	l.jr    r9
+	l.nop
+
+_dc_enable:
+	/* Check if DC present and skip enabling otherwise */
+	l.mfspr r24,r0,SPR_UPR
+	l.andi  r26,r24,SPR_UPR_DCP
+	l.sfeq  r26,r0
+	l.bf	9f
+	l.nop
+
+	/* Disable DC */
+	l.mfspr r6,r0,SPR_SR
+	l.addi  r5,r0,-1
+	l.xori  r5,r5,SPR_SR_DCE
+	l.and   r5,r6,r5
+	l.mtspr r0,r5,SPR_SR
+
+	/* Establish cache block size
+	   If BS=0, 16;
+	   If BS=1, 32;
+	   r14 contain block size
+	*/
+	l.mfspr r24,r0,SPR_DCCFGR
+	l.andi	r26,r24,SPR_DCCFGR_CBS
+	l.srli	r28,r26,7
+	l.ori	r30,r0,16
+	l.sll	r14,r30,r28
+
+	/* Establish number of cache sets
+	   r16 contains number of cache sets
+	   r28 contains log(# of cache sets)
+	*/
+	l.andi  r26,r24,SPR_DCCFGR_NCS
+	l.srli 	r28,r26,3
+	l.ori   r30,r0,1
+	l.sll   r16,r30,r28
+
+	/* Invalidate DC */
+	l.addi  r6,r0,0
+	l.sll   r5,r14,r28
+1:
+	l.mtspr r0,r6,SPR_DCBIR
+	l.sfne  r6,r5
+	l.bf    1b
+	l.add   r6,r6,r14
+
+	/* Enable DC */
+	l.mfspr r6,r0,SPR_SR
+	l.ori   r6,r6,SPR_SR_DCE
+	l.mtspr r0,r6,SPR_SR
+9:
+	l.jr    r9
+	l.nop
+
+/* ===============================================[ page table masks ]=== */
+
+#define DTLB_UP_CONVERT_MASK  0x3fa
+#define ITLB_UP_CONVERT_MASK  0x3a
+
+/* for SMP we'd have (this is a bit subtle, CC must be always set
+ * for SMP, but since we have _PAGE_PRESENT bit always defined
+ * we can just modify the mask)
+ */
+#define DTLB_SMP_CONVERT_MASK  0x3fb
+#define ITLB_SMP_CONVERT_MASK  0x3b
+
+/* ---[ boot dtlb miss handler ]----------------------------------------- */
+
+boot_dtlb_miss_handler:
+
+/* mask for DTLB_MR register: - (0) sets V (valid) bit,
+ *                            - (31-12) sets bits belonging to VPN (31-12)
+ */
+#define DTLB_MR_MASK 0xfffff001
+
+/* mask for DTLB_TR register: - (2) sets CI (cache inhibit) bit,
+ *			      - (4) sets A (access) bit,
+ *                            - (5) sets D (dirty) bit,
+ *                            - (8) sets SRE (superuser read) bit
+ *                            - (9) sets SWE (superuser write) bit
+ *                            - (31-12) sets bits belonging to VPN (31-12)
+ */
+#define DTLB_TR_MASK 0xfffff332
+
+/* These are for masking out the VPN/PPN value from the MR/TR registers...
+ * it's not the same as the PFN */
+#define VPN_MASK 0xfffff000
+#define PPN_MASK 0xfffff000
+
+
+	EXCEPTION_STORE_GPR6
+
+#if 0
+	l.mfspr r6,r0,SPR_ESR_BASE	   //
+	l.andi  r6,r6,SPR_SR_SM            // are we in kernel mode ?
+	l.sfeqi r6,0                       // r6 == 0x1 --> SM
+	l.bf    exit_with_no_dtranslation  //
+	l.nop
+#endif
+
+	/* this could be optimized by moving storing of
+	 * non r6 registers here, and jumping r6 restore
+	 * if not in supervisor mode
+	 */
+
+	EXCEPTION_STORE_GPR2
+	EXCEPTION_STORE_GPR3
+	EXCEPTION_STORE_GPR4
+	EXCEPTION_STORE_GPR5
+
+	l.mfspr r4,r0,SPR_EEAR_BASE        // get the offending EA
+
+immediate_translation:
+	CLEAR_GPR(r6)
+
+	l.srli	r3,r4,0xd                  // r3 <- r4 / 8192 (sets are relative to page size (8Kb) NOT VPN size (4Kb)
+
+	l.mfspr r6, r0, SPR_DMMUCFGR
+	l.andi	r6, r6, SPR_DMMUCFGR_NTS
+	l.srli	r6, r6, SPR_DMMUCFGR_NTS_OFF
+	l.ori	r5, r0, 0x1
+	l.sll	r5, r5, r6 	// r5 = number DMMU sets
+	l.addi	r6, r5, -1  	// r6 = nsets mask
+	l.and	r2, r3, r6	// r2 <- r3 % NSETS_MASK
+
+	l.or    r6,r6,r4                   // r6 <- r4
+	l.ori   r6,r6,~(VPN_MASK)          // r6 <- VPN :VPN .xfff - clear up lo(r6) to 0x**** *fff
+	l.movhi r5,hi(DTLB_MR_MASK)        // r5 <- ffff:0000.x000
+	l.ori   r5,r5,lo(DTLB_MR_MASK)     // r5 <- ffff:1111.x001 - apply DTLB_MR_MASK
+	l.and   r5,r5,r6                   // r5 <- VPN :VPN .x001 - we have DTLBMR entry
+	l.mtspr r2,r5,SPR_DTLBMR_BASE(0)   // set DTLBMR
+
+	/* set up DTLB with no translation for EA <= 0xbfffffff */
+	LOAD_SYMBOL_2_GPR(r6,0xbfffffff)
+	l.sfgeu  r6,r4                     // flag if r6 >= r4 (if 0xbfffffff >= EA)
+	l.bf     1f                        // goto out
+	l.and    r3,r4,r4                  // delay slot :: 24 <- r4 (if flag==1)
+
+	tophys(r3,r4)                      // r3 <- PA
+1:
+	l.ori   r3,r3,~(PPN_MASK)          // r3 <- PPN :PPN .xfff - clear up lo(r6) to 0x**** *fff
+	l.movhi r5,hi(DTLB_TR_MASK)        // r5 <- ffff:0000.x000
+	l.ori   r5,r5,lo(DTLB_TR_MASK)     // r5 <- ffff:1111.x330 - apply DTLB_MR_MASK
+	l.and   r5,r5,r3                   // r5 <- PPN :PPN .x330 - we have DTLBTR entry
+	l.mtspr r2,r5,SPR_DTLBTR_BASE(0)   // set DTLBTR
+
+	EXCEPTION_LOAD_GPR6
+	EXCEPTION_LOAD_GPR5
+	EXCEPTION_LOAD_GPR4
+	EXCEPTION_LOAD_GPR3
+	EXCEPTION_LOAD_GPR2
+
+	l.rfe                              // SR <- ESR, PC <- EPC
+
+exit_with_no_dtranslation:
+	/* EA out of memory or not in supervisor mode */
+	EXCEPTION_LOAD_GPR6
+	EXCEPTION_LOAD_GPR4
+	l.j	_dispatch_bus_fault
+
+/* ---[ boot itlb miss handler ]----------------------------------------- */
+
+boot_itlb_miss_handler:
+
+/* mask for ITLB_MR register: - sets V (valid) bit,
+ *                            - sets bits belonging to VPN (15-12)
+ */
+#define ITLB_MR_MASK 0xfffff001
+
+/* mask for ITLB_TR register: - sets A (access) bit,
+ *                            - sets SXE (superuser execute) bit
+ *                            - sets bits belonging to VPN (15-12)
+ */
+#define ITLB_TR_MASK 0xfffff050
+
+/*
+#define VPN_MASK 0xffffe000
+#define PPN_MASK 0xffffe000
+*/
+
+
+
+	EXCEPTION_STORE_GPR2
+	EXCEPTION_STORE_GPR3
+	EXCEPTION_STORE_GPR4
+	EXCEPTION_STORE_GPR5
+	EXCEPTION_STORE_GPR6
+
+#if 0
+	l.mfspr r6,r0,SPR_ESR_BASE         //
+	l.andi  r6,r6,SPR_SR_SM            // are we in kernel mode ?
+	l.sfeqi r6,0                       // r6 == 0x1 --> SM
+	l.bf    exit_with_no_itranslation
+	l.nop
+#endif
+
+
+	l.mfspr r4,r0,SPR_EEAR_BASE        // get the offending EA
+
+earlyearly:
+	CLEAR_GPR(r6)
+
+	l.srli  r3,r4,0xd                  // r3 <- r4 / 8192 (sets are relative to page size (8Kb) NOT VPN size (4Kb)
+
+	l.mfspr r6, r0, SPR_IMMUCFGR
+	l.andi	r6, r6, SPR_IMMUCFGR_NTS
+	l.srli	r6, r6, SPR_IMMUCFGR_NTS_OFF
+	l.ori	r5, r0, 0x1
+	l.sll	r5, r5, r6 	// r5 = number IMMU sets from IMMUCFGR
+	l.addi	r6, r5, -1  	// r6 = nsets mask
+	l.and	r2, r3, r6	// r2 <- r3 % NSETS_MASK
+
+	l.or    r6,r6,r4                   // r6 <- r4
+	l.ori   r6,r6,~(VPN_MASK)          // r6 <- VPN :VPN .xfff - clear up lo(r6) to 0x**** *fff
+	l.movhi r5,hi(ITLB_MR_MASK)        // r5 <- ffff:0000.x000
+	l.ori   r5,r5,lo(ITLB_MR_MASK)     // r5 <- ffff:1111.x001 - apply ITLB_MR_MASK
+	l.and   r5,r5,r6                   // r5 <- VPN :VPN .x001 - we have ITLBMR entry
+	l.mtspr r2,r5,SPR_ITLBMR_BASE(0)   // set ITLBMR
+
+	/*
+	 * set up ITLB with no translation for EA <= 0x0fffffff
+	 *
+	 * we need this for head.S mapping (EA = PA). if we move all functions
+	 * which run with mmu enabled into entry.S, we might be able to eliminate this.
+	 *
+	 */
+	LOAD_SYMBOL_2_GPR(r6,0x0fffffff)
+	l.sfgeu  r6,r4                     // flag if r6 >= r4 (if 0xb0ffffff >= EA)
+	l.bf     1f                        // goto out
+	l.and    r3,r4,r4                  // delay slot :: 24 <- r4 (if flag==1)
+
+	tophys(r3,r4)                      // r3 <- PA
+1:
+	l.ori   r3,r3,~(PPN_MASK)          // r3 <- PPN :PPN .xfff - clear up lo(r6) to 0x**** *fff
+	l.movhi r5,hi(ITLB_TR_MASK)        // r5 <- ffff:0000.x000
+	l.ori   r5,r5,lo(ITLB_TR_MASK)     // r5 <- ffff:1111.x050 - apply ITLB_MR_MASK
+	l.and   r5,r5,r3                   // r5 <- PPN :PPN .x050 - we have ITLBTR entry
+	l.mtspr r2,r5,SPR_ITLBTR_BASE(0)   // set ITLBTR
+
+	EXCEPTION_LOAD_GPR6
+	EXCEPTION_LOAD_GPR5
+	EXCEPTION_LOAD_GPR4
+	EXCEPTION_LOAD_GPR3
+	EXCEPTION_LOAD_GPR2
+
+	l.rfe                              // SR <- ESR, PC <- EPC
+
+exit_with_no_itranslation:
+	EXCEPTION_LOAD_GPR4
+	EXCEPTION_LOAD_GPR6
+	l.j    _dispatch_bus_fault
+	l.nop
+
+/* ====================================================================== */
+/*
+ * Stuff below here shouldn't go into .head section... maybe this stuff
+ * can be moved to entry.S ???
+ */
+
+/* ==============================================[ DTLB miss handler ]=== */
+
+/*
+ * Comments:
+ *   Exception handlers are entered with MMU off so the following handler
+ *   needs to use physical addressing
+ *
+ */
+
+	.text
+ENTRY(dtlb_miss_handler)
+	EXCEPTION_STORE_GPR2
+	EXCEPTION_STORE_GPR3
+	EXCEPTION_STORE_GPR4
+	/*
+	 * get EA of the miss
+	 */
+	l.mfspr	r2,r0,SPR_EEAR_BASE
+	/*
+	 * pmd = (pmd_t *)(current_pgd + pgd_index(daddr));
+	 */
+	GET_CURRENT_PGD(r3,r4)		// r3 is current_pgd, r4 is temp
+	l.srli	r4,r2,0x18		// >> PAGE_SHIFT + (PAGE_SHIFT - 2)
+	l.slli	r4,r4,0x2		// to get address << 2
+	l.add	r3,r4,r3		// r4 is pgd_index(daddr)
+	/*
+	 * if (pmd_none(*pmd))
+	 *   goto pmd_none:
+	 */
+	tophys	(r4,r3)
+	l.lwz	r3,0x0(r4)		// get *pmd value
+	l.sfne	r3,r0
+	l.bnf	d_pmd_none
+	 l.addi	r3,r0,0xffffe000	// PAGE_MASK
+
+d_pmd_good:
+	/*
+	 * pte = *pte_offset(pmd, daddr);
+	 */
+	l.lwz	r4,0x0(r4)		// get **pmd value
+	l.and	r4,r4,r3		// & PAGE_MASK
+	l.srli	r2,r2,0xd		// >> PAGE_SHIFT, r2 == EEAR
+	l.andi	r3,r2,0x7ff		// (1UL << PAGE_SHIFT - 2) - 1
+	l.slli	r3,r3,0x2		// to get address << 2
+	l.add	r3,r3,r4
+	l.lwz	r3,0x0(r3)		// this is pte at last
+	/*
+	 * if (!pte_present(pte))
+	 */
+	l.andi	r4,r3,0x1
+	l.sfne	r4,r0			// is pte present
+	l.bnf	d_pte_not_present
+	l.addi	r4,r0,0xffffe3fa	// PAGE_MASK | DTLB_UP_CONVERT_MASK
+	/*
+	 * fill DTLB TR register
+	 */
+	l.and	r4,r3,r4		// apply the mask
+	// Determine number of DMMU sets
+	l.mfspr r2, r0, SPR_DMMUCFGR
+	l.andi	r2, r2, SPR_DMMUCFGR_NTS
+	l.srli	r2, r2, SPR_DMMUCFGR_NTS_OFF
+	l.ori	r3, r0, 0x1
+	l.sll	r3, r3, r2 	// r3 = number DMMU sets DMMUCFGR
+	l.addi	r2, r3, -1  	// r2 = nsets mask
+	l.mfspr	r3, r0, SPR_EEAR_BASE
+	l.srli	r3, r3, 0xd	// >> PAGE_SHIFT
+	l.and	r2, r3, r2	// calc offset:	 & (NUM_TLB_ENTRIES-1)
+	                                                   //NUM_TLB_ENTRIES
+	l.mtspr	r2,r4,SPR_DTLBTR_BASE(0)
+	/*
+	 * fill DTLB MR register
+	 */
+	l.slli	r3, r3, 0xd		/* << PAGE_SHIFT => EA & PAGE_MASK */
+	l.ori	r4,r3,0x1		// set hardware valid bit: DTBL_MR entry
+	l.mtspr	r2,r4,SPR_DTLBMR_BASE(0)
+
+	EXCEPTION_LOAD_GPR2
+	EXCEPTION_LOAD_GPR3
+	EXCEPTION_LOAD_GPR4
+	l.rfe
+d_pmd_none:
+d_pte_not_present:
+	EXCEPTION_LOAD_GPR2
+	EXCEPTION_LOAD_GPR3
+	EXCEPTION_LOAD_GPR4
+	EXCEPTION_HANDLE(_dtlb_miss_page_fault_handler)
+
+/* ==============================================[ ITLB miss handler ]=== */
+ENTRY(itlb_miss_handler)
+	EXCEPTION_STORE_GPR2
+	EXCEPTION_STORE_GPR3
+	EXCEPTION_STORE_GPR4
+	/*
+	 * get EA of the miss
+	 */
+	l.mfspr	r2,r0,SPR_EEAR_BASE
+
+	/*
+	 * pmd = (pmd_t *)(current_pgd + pgd_index(daddr));
+	 *
+	 */
+	GET_CURRENT_PGD(r3,r4)		// r3 is current_pgd, r5 is temp
+	l.srli	r4,r2,0x18		// >> PAGE_SHIFT + (PAGE_SHIFT - 2)
+	l.slli	r4,r4,0x2		// to get address << 2
+	l.add	r3,r4,r3		// r4 is pgd_index(daddr)
+	/*
+	 * if (pmd_none(*pmd))
+	 *   goto pmd_none:
+	 */
+	tophys	(r4,r3)
+	l.lwz	r3,0x0(r4)		// get *pmd value
+	l.sfne	r3,r0
+	l.bnf	i_pmd_none
+	 l.addi	r3,r0,0xffffe000	// PAGE_MASK
+
+i_pmd_good:
+	/*
+	 * pte = *pte_offset(pmd, iaddr);
+	 *
+	 */
+	l.lwz	r4,0x0(r4)		// get **pmd value
+	l.and	r4,r4,r3		// & PAGE_MASK
+	l.srli	r2,r2,0xd		// >> PAGE_SHIFT, r2 == EEAR
+	l.andi	r3,r2,0x7ff		// (1UL << PAGE_SHIFT - 2) - 1
+	l.slli	r3,r3,0x2		// to get address << 2
+	l.add	r3,r3,r4
+	l.lwz	r3,0x0(r3)		// this is pte at last
+	/*
+	 * if (!pte_present(pte))
+	 *
+	 */
+	l.andi	r4,r3,0x1
+	l.sfne	r4,r0			// is pte present
+	l.bnf	i_pte_not_present
+	 l.addi	r4,r0,0xffffe03a	// PAGE_MASK | ITLB_UP_CONVERT_MASK
+	/*
+	 * fill ITLB TR register
+	 */
+	l.and	r4,r3,r4		// apply the mask
+	l.andi	r3,r3,0x7c0		// _PAGE_EXEC | _PAGE_SRE | _PAGE_SWE |  _PAGE_URE | _PAGE_UWE
+	l.sfeq	r3,r0
+	l.bf	itlb_tr_fill //_workaround
+	// Determine number of IMMU sets
+	l.mfspr r2, r0, SPR_IMMUCFGR
+	l.andi	r2, r2, SPR_IMMUCFGR_NTS
+	l.srli	r2, r2, SPR_IMMUCFGR_NTS_OFF
+	l.ori	r3, r0, 0x1
+	l.sll	r3, r3, r2 	// r3 = number IMMU sets IMMUCFGR
+	l.addi	r2, r3, -1  	// r2 = nsets mask
+	l.mfspr	r3, r0, SPR_EEAR_BASE
+	l.srli	r3, r3, 0xd	// >> PAGE_SHIFT
+	l.and	r2, r3, r2	// calc offset:	 & (NUM_TLB_ENTRIES-1)
+
+/*
+ * __PHX__ :: fixme
+ * we should not just blindly set executable flags,
+ * but it does help with ping. the clean way would be to find out
+ * (and fix it) why stack doesn't have execution permissions
+ */
+
+itlb_tr_fill_workaround:
+	l.ori	r4,r4,0xc0		// | (SPR_ITLBTR_UXE | ITLBTR_SXE)
+itlb_tr_fill:
+	l.mtspr	r2,r4,SPR_ITLBTR_BASE(0)
+	/*
+	 * fill DTLB MR register
+	 */
+	l.slli	r3, r3, 0xd		/* << PAGE_SHIFT => EA & PAGE_MASK */
+	l.ori	r4,r3,0x1		// set hardware valid bit: ITBL_MR entry
+	l.mtspr	r2,r4,SPR_ITLBMR_BASE(0)
+
+	EXCEPTION_LOAD_GPR2
+	EXCEPTION_LOAD_GPR3
+	EXCEPTION_LOAD_GPR4
+	l.rfe
+
+i_pmd_none:
+i_pte_not_present:
+	EXCEPTION_LOAD_GPR2
+	EXCEPTION_LOAD_GPR3
+	EXCEPTION_LOAD_GPR4
+	EXCEPTION_HANDLE(_itlb_miss_page_fault_handler)
+
+/* ==============================================[ boot tlb handlers ]=== */
+
+
+/* =================================================[ debugging aids ]=== */
+
+	.align 64
+_immu_trampoline:
+	.space 64
+_immu_trampoline_top:
+
+#define TRAMP_SLOT_0		(0x0)
+#define TRAMP_SLOT_1		(0x4)
+#define TRAMP_SLOT_2		(0x8)
+#define TRAMP_SLOT_3		(0xc)
+#define TRAMP_SLOT_4		(0x10)
+#define TRAMP_SLOT_5		(0x14)
+#define TRAMP_FRAME_SIZE	(0x18)
+
+ENTRY(_immu_trampoline_workaround)
+	// r2 EEA
+	// r6 is physical EEA
+	tophys(r6,r2)
+
+	LOAD_SYMBOL_2_GPR(r5,_immu_trampoline)
+	tophys	(r3,r5)			// r3 is trampoline (physical)
+
+	LOAD_SYMBOL_2_GPR(r4,0x15000000)
+	l.sw	TRAMP_SLOT_0(r3),r4
+	l.sw	TRAMP_SLOT_1(r3),r4
+	l.sw	TRAMP_SLOT_4(r3),r4
+	l.sw	TRAMP_SLOT_5(r3),r4
+
+					// EPC = EEA - 0x4
+	l.lwz	r4,0x0(r6)		// load op @ EEA + 0x0 (fc address)
+	l.sw	TRAMP_SLOT_3(r3),r4	// store it to _immu_trampoline_data
+	l.lwz	r4,-0x4(r6)		// load op @ EEA - 0x4 (f8 address)
+	l.sw	TRAMP_SLOT_2(r3),r4	// store it to _immu_trampoline_data
+
+	l.srli  r5,r4,26                // check opcode for write access
+	l.sfeqi r5,0                    // l.j
+	l.bf    0f
+	l.sfeqi r5,0x11                 // l.jr
+	l.bf    1f
+	l.sfeqi r5,1                    // l.jal
+	l.bf    2f
+	l.sfeqi r5,0x12                 // l.jalr
+	l.bf    3f
+	l.sfeqi r5,3                    // l.bnf
+	l.bf    4f
+	l.sfeqi r5,4                    // l.bf
+	l.bf    5f
+99:
+	l.nop
+	l.j	99b			// should never happen
+	l.nop	1
+
+	// r2 is EEA
+	// r3 is trampoline address (physical)
+	// r4 is instruction
+	// r6 is physical(EEA)
+	//
+	// r5
+
+2:	// l.jal
+
+	/* 19 20 aa aa	l.movhi r9,0xaaaa
+	 * a9 29 bb bb  l.ori	r9,0xbbbb
+	 *
+	 * where 0xaaaabbbb is EEA + 0x4 shifted right 2
+	 */
+
+	l.addi	r6,r2,0x4		// this is 0xaaaabbbb
+
+					// l.movhi r9,0xaaaa
+	l.ori	r5,r0,0x1920		// 0x1920 == l.movhi r9
+	l.sh	(TRAMP_SLOT_0+0x0)(r3),r5
+	l.srli	r5,r6,16
+	l.sh	(TRAMP_SLOT_0+0x2)(r3),r5
+
+					// l.ori   r9,0xbbbb
+	l.ori	r5,r0,0xa929		// 0xa929 == l.ori r9
+	l.sh	(TRAMP_SLOT_1+0x0)(r3),r5
+	l.andi	r5,r6,0xffff
+	l.sh	(TRAMP_SLOT_1+0x2)(r3),r5
+
+	/* falthrough, need to set up new jump offset */
+
+
+0:	// l.j
+	l.slli	r6,r4,6			// original offset shifted left 6 - 2
+//	l.srli	r6,r6,6			// original offset shifted right 2
+
+	l.slli	r4,r2,4			// old jump position: EEA shifted left 4
+//	l.srli	r4,r4,6			// old jump position: shifted right 2
+
+	l.addi	r5,r3,0xc		// new jump position (physical)
+	l.slli	r5,r5,4			// new jump position: shifted left 4
+
+	// calculate new jump offset
+	// new_off = old_off + (old_jump - new_jump)
+
+	l.sub	r5,r4,r5		// old_jump - new_jump
+	l.add	r5,r6,r5		// orig_off + (old_jump - new_jump)
+	l.srli	r5,r5,6			// new offset shifted right 2
+
+	// r5 is new jump offset
+					// l.j has opcode 0x0...
+	l.sw	TRAMP_SLOT_2(r3),r5	// write it back
+
+	l.j	trampoline_out
+	l.nop
+
+/* ----------------------------- */
+
+3:	// l.jalr
+
+	/* 19 20 aa aa	l.movhi r9,0xaaaa
+	 * a9 29 bb bb  l.ori	r9,0xbbbb
+	 *
+	 * where 0xaaaabbbb is EEA + 0x4 shifted right 2
+	 */
+
+	l.addi	r6,r2,0x4		// this is 0xaaaabbbb
+
+					// l.movhi r9,0xaaaa
+	l.ori	r5,r0,0x1920		// 0x1920 == l.movhi r9
+	l.sh	(TRAMP_SLOT_0+0x0)(r3),r5
+	l.srli	r5,r6,16
+	l.sh	(TRAMP_SLOT_0+0x2)(r3),r5
+
+					// l.ori   r9,0xbbbb
+	l.ori	r5,r0,0xa929		// 0xa929 == l.ori r9
+	l.sh	(TRAMP_SLOT_1+0x0)(r3),r5
+	l.andi	r5,r6,0xffff
+	l.sh	(TRAMP_SLOT_1+0x2)(r3),r5
+
+	l.lhz	r5,(TRAMP_SLOT_2+0x0)(r3)	// load hi part of jump instruction
+	l.andi	r5,r5,0x3ff		// clear out opcode part
+	l.ori	r5,r5,0x4400		// opcode changed from l.jalr -> l.jr
+	l.sh	(TRAMP_SLOT_2+0x0)(r3),r5 // write it back
+
+	/* falthrough */
+
+1:	// l.jr
+	l.j	trampoline_out
+	l.nop
+
+/* ----------------------------- */
+
+4:	// l.bnf
+5:	// l.bf
+	l.slli	r6,r4,6			// original offset shifted left 6 - 2
+//	l.srli	r6,r6,6			// original offset shifted right 2
+
+	l.slli	r4,r2,4			// old jump position: EEA shifted left 4
+//	l.srli	r4,r4,6			// old jump position: shifted right 2
+
+	l.addi	r5,r3,0xc		// new jump position (physical)
+	l.slli	r5,r5,4			// new jump position: shifted left 4
+
+	// calculate new jump offset
+	// new_off = old_off + (old_jump - new_jump)
+
+	l.add	r6,r6,r4		// (orig_off + old_jump)
+	l.sub	r6,r6,r5		// (orig_off + old_jump) - new_jump
+	l.srli	r6,r6,6			// new offset shifted right 2
+
+	// r6 is new jump offset
+	l.lwz	r4,(TRAMP_SLOT_2+0x0)(r3)	// load jump instruction
+	l.srli	r4,r4,16
+	l.andi	r4,r4,0xfc00		// get opcode part
+	l.slli	r4,r4,16
+	l.or	r6,r4,r6		// l.b(n)f new offset
+	l.sw	TRAMP_SLOT_2(r3),r6	// write it back
+
+	/* we need to add l.j to EEA + 0x8 */
+	tophys	(r4,r2)			// may not be needed (due to shifts down_
+	l.addi	r4,r4,(0x8 - 0x8)	// jump target = r2 + 0x8 (compensate for 0x8)
+					// jump position = r5 + 0x8 (0x8 compensated)
+	l.sub	r4,r4,r5		// jump offset = target - new_position + 0x8
+
+	l.slli	r4,r4,4			// the amount of info in imediate of jump
+	l.srli	r4,r4,6			// jump instruction with offset
+	l.sw	TRAMP_SLOT_4(r3),r4	// write it to 4th slot
+
+	/* fallthrough */
+
+trampoline_out:
+	// set up new EPC to point to our trampoline code
+	LOAD_SYMBOL_2_GPR(r5,_immu_trampoline)
+	l.mtspr	r0,r5,SPR_EPCR_BASE
+
+	// immu_trampoline is (4x) CACHE_LINE aligned
+	// and only 6 instructions long,
+	// so we need to invalidate only 2 lines
+
+	/* Establish cache block size
+	   If BS=0, 16;
+	   If BS=1, 32;
+	   r14 contain block size
+	*/
+	l.mfspr r21,r0,SPR_ICCFGR
+	l.andi	r21,r21,SPR_ICCFGR_CBS
+	l.srli	r21,r21,7
+	l.ori	r23,r0,16
+	l.sll	r14,r23,r21
+
+	l.mtspr	r0,r5,SPR_ICBIR
+	l.add	r5,r5,r14
+	l.mtspr	r0,r5,SPR_ICBIR
+
+	l.jr	r9
+	l.nop
+
+
+/*
+ * DSCR: prints a string referenced by r3.
+ *
+ * PRMS: r3     	- address of the first character of null
+ *			terminated string to be printed
+ *
+ * PREQ: UART at UART_BASE_ADD has to be initialized
+ *
+ * POST: caller should be aware that r3, r9 are changed
+ */
+ENTRY(_emergency_print)
+	EMERGENCY_PRINT_STORE_GPR4
+	EMERGENCY_PRINT_STORE_GPR5
+	EMERGENCY_PRINT_STORE_GPR6
+	EMERGENCY_PRINT_STORE_GPR7
+2:
+	l.lbz	r7,0(r3)
+	l.sfeq	r7,r0
+	l.bf	9f
+	l.nop
+
+// putc:
+	l.movhi r4,hi(UART_BASE_ADD)
+
+	l.addi  r6,r0,0x20
+1:      l.lbz   r5,5(r4)
+	l.andi  r5,r5,0x20
+	l.sfeq  r5,r6
+	l.bnf   1b
+	l.nop
+
+	l.sb    0(r4),r7
+
+	l.addi  r6,r0,0x60
+1:      l.lbz   r5,5(r4)
+	l.andi  r5,r5,0x60
+	l.sfeq  r5,r6
+	l.bnf   1b
+	l.nop
+
+	/* next character */
+	l.j	2b
+	l.addi	r3,r3,0x1
+
+9:
+	EMERGENCY_PRINT_LOAD_GPR7
+	EMERGENCY_PRINT_LOAD_GPR6
+	EMERGENCY_PRINT_LOAD_GPR5
+	EMERGENCY_PRINT_LOAD_GPR4
+	l.jr	r9
+	l.nop
+
+ENTRY(_emergency_print_nr)
+	EMERGENCY_PRINT_STORE_GPR4
+	EMERGENCY_PRINT_STORE_GPR5
+	EMERGENCY_PRINT_STORE_GPR6
+	EMERGENCY_PRINT_STORE_GPR7
+	EMERGENCY_PRINT_STORE_GPR8
+
+	l.addi	r8,r0,32		// shift register
+
+1:	/* remove leading zeros */
+	l.addi	r8,r8,-0x4
+	l.srl	r7,r3,r8
+	l.andi	r7,r7,0xf
+
+	/* don't skip the last zero if number == 0x0 */
+	l.sfeqi	r8,0x4
+	l.bf	2f
+	l.nop
+
+	l.sfeq	r7,r0
+	l.bf	1b
+	l.nop
+
+2:
+	l.srl	r7,r3,r8
+
+	l.andi	r7,r7,0xf
+	l.sflts	r8,r0
+	l.bf	9f
+
+	l.sfgtui r7,0x9
+	l.bnf	8f
+	l.nop
+	l.addi	r7,r7,0x27
+
+8:
+	l.addi	r7,r7,0x30
+// putc:
+	l.movhi r4,hi(UART_BASE_ADD)
+
+	l.addi  r6,r0,0x20
+1:      l.lbz   r5,5(r4)
+	l.andi  r5,r5,0x20
+	l.sfeq  r5,r6
+	l.bnf   1b
+	l.nop
+
+	l.sb    0(r4),r7
+
+	l.addi  r6,r0,0x60
+1:      l.lbz   r5,5(r4)
+	l.andi  r5,r5,0x60
+	l.sfeq  r5,r6
+	l.bnf   1b
+	l.nop
+
+	/* next character */
+	l.j	2b
+	l.addi	r8,r8,-0x4
+
+9:
+	EMERGENCY_PRINT_LOAD_GPR8
+	EMERGENCY_PRINT_LOAD_GPR7
+	EMERGENCY_PRINT_LOAD_GPR6
+	EMERGENCY_PRINT_LOAD_GPR5
+	EMERGENCY_PRINT_LOAD_GPR4
+	l.jr	r9
+	l.nop
+
+
+/*
+ * This should be used for debugging only.
+ * It messes up the Linux early serial output
+ * somehow, so use it sparingly and essentially
+ * only if you need to debug something that goes wrong
+ * before Linux gets the early serial going.
+ *
+ * Furthermore, you'll have to make sure you set the
+ * UART_DEVISOR correctly according to the system
+ * clock rate.
+ *
+ *
+ */
+
+
+
+#define SYS_CLK            20000000
+//#define SYS_CLK            1843200
+#define OR32_CONSOLE_BAUD  115200
+#define UART_DIVISOR       SYS_CLK/(16*OR32_CONSOLE_BAUD)
+
+ENTRY(_early_uart_init)
+	l.movhi	r3,hi(UART_BASE_ADD)
+
+	l.addi	r4,r0,0x7
+	l.sb	0x2(r3),r4
+
+	l.addi	r4,r0,0x0
+	l.sb	0x1(r3),r4
+
+	l.addi	r4,r0,0x3
+	l.sb	0x3(r3),r4
+
+	l.lbz	r5,3(r3)
+	l.ori	r4,r5,0x80
+	l.sb	0x3(r3),r4
+	l.addi	r4,r0,((UART_DIVISOR>>8) & 0x000000ff)
+	l.sb	UART_DLM(r3),r4
+	l.addi  r4,r0,((UART_DIVISOR) & 0x000000ff)
+	l.sb	UART_DLL(r3),r4
+	l.sb	0x3(r3),r5
+
+	l.jr	r9
+	l.nop
+
+	.section .rodata
+_string_unhandled_exception:
+	.string "\n\rRunarunaround: Unhandled exception 0x\0"
+
+_string_epc_prefix:
+	.string ": EPC=0x\0"
+
+_string_nl:
+	.string "\n\r\0"
+
+
+/* ========================================[ page aligned structures ]=== */
+
+/*
+ * .data section should be page aligned
+ *	(look into arch/openrisc/kernel/vmlinux.lds.S)
+ */
+	.section .data,"aw"
+	.align	8192
+	.global  empty_zero_page
+empty_zero_page:
+	.space  8192
+
+	.global  swapper_pg_dir
+swapper_pg_dir:
+	.space  8192
+
+	.global	_unhandled_stack
+_unhandled_stack:
+	.space	8192
+_unhandled_stack_top:
+
+/* ============================================================[ EOF ]=== */
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/irq.c b/src/kernel/linux/v4.14/arch/openrisc/kernel/irq.c
new file mode 100644
index 0000000..35e478a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/irq.c
@@ -0,0 +1,54 @@
+/*
+ * OpenRISC irq.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/ftrace.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/export.h>
+#include <linux/irqflags.h>
+
+/* read interrupt enabled status */
+unsigned long arch_local_save_flags(void)
+{
+	return mfspr(SPR_SR) & (SPR_SR_IEE|SPR_SR_TEE);
+}
+EXPORT_SYMBOL(arch_local_save_flags);
+
+/* set interrupt enabled status */
+void arch_local_irq_restore(unsigned long flags)
+{
+	mtspr(SPR_SR, ((mfspr(SPR_SR) & ~(SPR_SR_IEE|SPR_SR_TEE)) | flags));
+}
+EXPORT_SYMBOL(arch_local_irq_restore);
+
+void __init init_IRQ(void)
+{
+	irqchip_init();
+}
+
+static void (*handle_arch_irq)(struct pt_regs *);
+
+void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
+{
+	handle_arch_irq = handle_irq;
+}
+
+void __irq_entry do_IRQ(struct pt_regs *regs)
+{
+	handle_arch_irq(regs);
+}
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/module.c b/src/kernel/linux/v4.14/arch/openrisc/kernel/module.c
new file mode 100644
index 0000000..ef872ae
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/module.c
@@ -0,0 +1,70 @@
+/*
+ * OpenRISC module.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+		       const char *strtab,
+		       unsigned int symindex,
+		       unsigned int relsec,
+		       struct module *me)
+{
+	unsigned int i;
+	Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+	Elf32_Sym *sym;
+	uint32_t *location;
+	uint32_t value;
+
+	pr_debug("Applying relocate section %u to %u\n", relsec,
+		 sechdrs[relsec].sh_info);
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+
+		/* This is the symbol it is referring to.  Note that all
+		   undefined symbols have been resolved.  */
+		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+			+ ELF32_R_SYM(rel[i].r_info);
+		value = sym->st_value + rel[i].r_addend;
+
+		switch (ELF32_R_TYPE(rel[i].r_info)) {
+		case R_OR32_32:
+			*location = value;
+			break;
+		case R_OR32_CONST:
+			*((uint16_t *)location + 1) = value;
+			break;
+		case R_OR32_CONSTH:
+			*((uint16_t *)location + 1) = value >> 16;
+			break;
+		case R_OR32_JUMPTARG:
+			value -= (uint32_t)location;
+			value >>= 2;
+			value &= 0x03ffffff;
+			value |= *location & 0xfc000000;
+			*location = value;
+			break;
+		default:
+			pr_err("module %s: Unknown relocation: %u\n",
+			       me->name, ELF32_R_TYPE(rel[i].r_info));
+			break;
+		}
+	}
+
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/or32_ksyms.c b/src/kernel/linux/v4.14/arch/openrisc/kernel/or32_ksyms.c
new file mode 100644
index 0000000..d7260fd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/or32_ksyms.c
@@ -0,0 +1,51 @@
+/*
+ * OpenRISC or32_ksyms.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/export.h>
+#include <linux/elfcore.h>
+#include <linux/sched.h>
+#include <linux/in6.h>
+#include <linux/interrupt.h>
+#include <linux/vmalloc.h>
+#include <linux/semaphore.h>
+
+#include <asm/processor.h>
+#include <linux/uaccess.h>
+#include <asm/checksum.h>
+#include <asm/io.h>
+#include <asm/hardirq.h>
+#include <asm/delay.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+
+#define DECLARE_EXPORT(name) extern void name(void); EXPORT_SYMBOL(name)
+
+/* compiler generated symbols */
+DECLARE_EXPORT(__udivsi3);
+DECLARE_EXPORT(__divsi3);
+DECLARE_EXPORT(__umodsi3);
+DECLARE_EXPORT(__modsi3);
+DECLARE_EXPORT(__muldi3);
+DECLARE_EXPORT(__ashrdi3);
+DECLARE_EXPORT(__ashldi3);
+DECLARE_EXPORT(__lshrdi3);
+DECLARE_EXPORT(__ucmpdi2);
+
+EXPORT_SYMBOL(empty_zero_page);
+EXPORT_SYMBOL(__copy_tofrom_user);
+EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(memset);
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/process.c b/src/kernel/linux/v4.14/arch/openrisc/kernel/process.c
new file mode 100644
index 0000000..8739b6d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/process.c
@@ -0,0 +1,284 @@
+/*
+ * OpenRISC process.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ * This file handles the architecture-dependent parts of process handling...
+ */
+
+#define __KERNEL_SYSCALLS__
+#include <stdarg.h>
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task.h>
+#include <linux/sched/task_stack.h>
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/elfcore.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/init_task.h>
+#include <linux/mqueue.h>
+#include <linux/fs.h>
+
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/spr_defs.h>
+
+#include <linux/smp.h>
+
+/*
+ * Pointer to Current thread info structure.
+ *
+ * Used at user space -> kernel transitions.
+ */
+struct thread_info *current_thread_info_set[NR_CPUS] = { &init_thread_info, };
+
+void machine_restart(void)
+{
+	printk(KERN_INFO "*** MACHINE RESTART ***\n");
+	__asm__("l.nop 1");
+}
+
+/*
+ * Similar to machine_power_off, but don't shut off power.  Add code
+ * here to freeze the system for e.g. post-mortem debug purpose when
+ * possible.  This halt has nothing to do with the idle halt.
+ */
+void machine_halt(void)
+{
+	printk(KERN_INFO "*** MACHINE HALT ***\n");
+	__asm__("l.nop 1");
+}
+
+/* If or when software power-off is implemented, add code here.  */
+void machine_power_off(void)
+{
+	printk(KERN_INFO "*** MACHINE POWER OFF ***\n");
+	__asm__("l.nop 1");
+}
+
+/*
+ * Send the doze signal to the cpu if available.
+ * Make sure, that all interrupts are enabled
+ */
+void arch_cpu_idle(void)
+{
+	local_irq_enable();
+	if (mfspr(SPR_UPR) & SPR_UPR_PMP)
+		mtspr(SPR_PMR, mfspr(SPR_PMR) | SPR_PMR_DME);
+}
+
+void (*pm_power_off) (void) = machine_power_off;
+EXPORT_SYMBOL(pm_power_off);
+
+/*
+ * When a process does an "exec", machine state like FPU and debug
+ * registers need to be reset.  This is a hook function for that.
+ * Currently we don't have any such state to reset, so this is empty.
+ */
+void flush_thread(void)
+{
+}
+
+void show_regs(struct pt_regs *regs)
+{
+	extern void show_registers(struct pt_regs *regs);
+
+	show_regs_print_info(KERN_DEFAULT);
+	/* __PHX__ cleanup this mess */
+	show_registers(regs);
+}
+
+void release_thread(struct task_struct *dead_task)
+{
+}
+
+/*
+ * Copy the thread-specific (arch specific) info from the current
+ * process to the new one p
+ */
+extern asmlinkage void ret_from_fork(void);
+
+/*
+ * copy_thread
+ * @clone_flags: flags
+ * @usp: user stack pointer or fn for kernel thread
+ * @arg: arg to fn for kernel thread; always NULL for userspace thread
+ * @p: the newly created task
+ * @regs: CPU context to copy for userspace thread; always NULL for kthread
+ *
+ * At the top of a newly initialized kernel stack are two stacked pt_reg
+ * structures.  The first (topmost) is the userspace context of the thread.
+ * The second is the kernelspace context of the thread.
+ *
+ * A kernel thread will not be returning to userspace, so the topmost pt_regs
+ * struct can be uninitialized; it _does_ need to exist, though, because
+ * a kernel thread can become a userspace thread by doing a kernel_execve, in
+ * which case the topmost context will be initialized and used for 'returning'
+ * to userspace.
+ *
+ * The second pt_reg struct needs to be initialized to 'return' to
+ * ret_from_fork.  A kernel thread will need to set r20 to the address of
+ * a function to call into (with arg in r22); userspace threads need to set
+ * r20 to NULL in which case ret_from_fork will just continue a return to
+ * userspace.
+ *
+ * A kernel thread 'fn' may return; this is effectively what happens when
+ * kernel_execve is called.  In that case, the userspace pt_regs must have
+ * been initialized (which kernel_execve takes care of, see start_thread
+ * below); ret_from_fork will then continue its execution causing the
+ * 'kernel thread' to return to userspace as a userspace thread.
+ */
+
+int
+copy_thread(unsigned long clone_flags, unsigned long usp,
+	    unsigned long arg, struct task_struct *p)
+{
+	struct pt_regs *userregs;
+	struct pt_regs *kregs;
+	unsigned long sp = (unsigned long)task_stack_page(p) + THREAD_SIZE;
+	unsigned long top_of_kernel_stack;
+
+	top_of_kernel_stack = sp;
+
+	/* Locate userspace context on stack... */
+	sp -= STACK_FRAME_OVERHEAD;	/* redzone */
+	sp -= sizeof(struct pt_regs);
+	userregs = (struct pt_regs *) sp;
+
+	/* ...and kernel context */
+	sp -= STACK_FRAME_OVERHEAD;	/* redzone */
+	sp -= sizeof(struct pt_regs);
+	kregs = (struct pt_regs *)sp;
+
+	if (unlikely(p->flags & PF_KTHREAD)) {
+		memset(kregs, 0, sizeof(struct pt_regs));
+		kregs->gpr[20] = usp; /* fn, kernel thread */
+		kregs->gpr[22] = arg;
+	} else {
+		*userregs = *current_pt_regs();
+
+		if (usp)
+			userregs->sp = usp;
+
+		/*
+		 * For CLONE_SETTLS set "tp" (r10) to the TLS pointer passed to sys_clone.
+		 *
+		 * The kernel entry is:
+		 *	int clone (long flags, void *child_stack, int *parent_tid,
+		 *		int *child_tid, struct void *tls)
+		 *
+		 * This makes the source r7 in the kernel registers.
+		 */
+		if (clone_flags & CLONE_SETTLS)
+			userregs->gpr[10] = userregs->gpr[7];
+
+		userregs->gpr[11] = 0;	/* Result from fork() */
+
+		kregs->gpr[20] = 0;	/* Userspace thread */
+	}
+
+	/*
+	 * _switch wants the kernel stack page in pt_regs->sp so that it
+	 * can restore it to thread_info->ksp... see _switch for details.
+	 */
+	kregs->sp = top_of_kernel_stack;
+	kregs->gpr[9] = (unsigned long)ret_from_fork;
+
+	task_thread_info(p)->ksp = (unsigned long)kregs;
+
+	return 0;
+}
+
+/*
+ * Set up a thread for executing a new program
+ */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp)
+{
+	unsigned long sr = mfspr(SPR_SR) & ~SPR_SR_SM;
+
+	memset(regs, 0, sizeof(struct pt_regs));
+
+	regs->pc = pc;
+	regs->sr = sr;
+	regs->sp = sp;
+}
+
+/* Fill in the fpu structure for a core dump.  */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t * fpu)
+{
+	/* TODO */
+	return 0;
+}
+
+extern struct thread_info *_switch(struct thread_info *old_ti,
+				   struct thread_info *new_ti);
+extern int lwa_flag;
+
+struct task_struct *__switch_to(struct task_struct *old,
+				struct task_struct *new)
+{
+	struct task_struct *last;
+	struct thread_info *new_ti, *old_ti;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/* current_set is an array of saved current pointers
+	 * (one for each cpu). we need them at user->kernel transition,
+	 * while we save them at kernel->user transition
+	 */
+	new_ti = new->stack;
+	old_ti = old->stack;
+
+	lwa_flag = 0;
+
+	current_thread_info_set[smp_processor_id()] = new_ti;
+	last = (_switch(old_ti, new_ti))->task;
+
+	local_irq_restore(flags);
+
+	return last;
+}
+
+/*
+ * Write out registers in core dump format, as defined by the
+ * struct user_regs_struct
+ */
+void dump_elf_thread(elf_greg_t *dest, struct pt_regs* regs)
+{
+	dest[0] = 0; /* r0 */
+	memcpy(dest+1, regs->gpr+1, 31*sizeof(unsigned long));
+	dest[32] = regs->pc;
+	dest[33] = regs->sr;
+	dest[34] = 0;
+	dest[35] = 0;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+	/* TODO */
+
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/prom.c b/src/kernel/linux/v4.14/arch/openrisc/kernel/prom.c
new file mode 100644
index 0000000..6a44340
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/prom.c
@@ -0,0 +1,32 @@
+/*
+ * OpenRISC prom.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ * Architecture specific procedures for creating, accessing and
+ * interpreting the device tree.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/memblock.h>
+#include <linux/of_fdt.h>
+
+#include <asm/page.h>
+
+void __init early_init_devtree(void *params)
+{
+	early_init_dt_scan(params);
+	memblock_allow_resize();
+}
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/ptrace.c b/src/kernel/linux/v4.14/arch/openrisc/kernel/ptrace.c
new file mode 100644
index 0000000..eb97a8e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/ptrace.c
@@ -0,0 +1,205 @@
+/*
+ * OpenRISC ptrace.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2005 Gyorgy Jeney <nog@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <linux/string.h>
+
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/audit.h>
+#include <linux/regset.h>
+#include <linux/tracehook.h>
+#include <linux/elf.h>
+
+#include <asm/thread_info.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/*
+ * Copy the thread state to a regset that can be interpreted by userspace.
+ *
+ * It doesn't matter what our internal pt_regs structure looks like.  The
+ * important thing is that we export a consistent view of the thread state
+ * to userspace.  As such, we need to make sure that the regset remains
+ * ABI compatible as defined by the struct user_regs_struct:
+ *
+ * (Each item is a 32-bit word)
+ * r0 = 0 (exported for clarity)
+ * 31 GPRS r1-r31
+ * PC (Program counter)
+ * SR (Supervision register)
+ */
+static int genregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user * ubuf)
+{
+	const struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	/* r0 */
+	ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, 0, 4);
+
+	if (!ret)
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+					  regs->gpr+1, 4, 4*32);
+	if (!ret)
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &regs->pc, 4*32, 4*33);
+	if (!ret)
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+					  &regs->sr, 4*33, 4*34);
+	if (!ret)
+		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					       4*34, -1);
+
+	return ret;
+}
+
+/*
+ * Set the thread state from a regset passed in via ptrace
+ */
+static int genregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user * ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	/* ignore r0 */
+	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, 0, 4);
+	/* r1 - r31 */
+	if (!ret)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 regs->gpr+1, 4, 4*32);
+	/* PC */
+	if (!ret)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &regs->pc, 4*32, 4*33);
+	/*
+	 * Skip SR and padding... userspace isn't allowed to changes bits in
+	 * the Supervision register
+	 */
+	if (!ret)
+		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+						4*33, -1);
+
+	return ret;
+}
+
+/*
+ * Define the register sets available on OpenRISC under Linux
+ */
+enum or1k_regset {
+	REGSET_GENERAL,
+};
+
+static const struct user_regset or1k_regsets[] = {
+	[REGSET_GENERAL] = {
+			    .core_note_type = NT_PRSTATUS,
+			    .n = ELF_NGREG,
+			    .size = sizeof(long),
+			    .align = sizeof(long),
+			    .get = genregs_get,
+			    .set = genregs_set,
+			    },
+};
+
+static const struct user_regset_view user_or1k_native_view = {
+	.name = "or1k",
+	.e_machine = EM_OPENRISC,
+	.regsets = or1k_regsets,
+	.n = ARRAY_SIZE(or1k_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_or1k_native_view;
+}
+
+/*
+ * does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure the single step bit is not set.
+ */
+void ptrace_disable(struct task_struct *child)
+{
+	pr_debug("ptrace_disable(): TODO\n");
+
+	user_disable_single_step(child);
+	clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+}
+
+long arch_ptrace(struct task_struct *child, long request, unsigned long addr,
+		 unsigned long data)
+{
+	int ret;
+
+	switch (request) {
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * Notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
+{
+	long ret = 0;
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in <something>.
+		 */
+		ret = -1L;
+
+	audit_syscall_entry(regs->gpr[11], regs->gpr[3], regs->gpr[4],
+			    regs->gpr[5], regs->gpr[6]);
+
+	return ret ? : regs->gpr[11];
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	int step;
+
+	audit_syscall_exit(regs);
+
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
+}
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/setup.c b/src/kernel/linux/v4.14/arch/openrisc/kernel/setup.c
new file mode 100644
index 0000000..dbf5ee9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/setup.c
@@ -0,0 +1,364 @@
+/*
+ * OpenRISC setup.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/initrd.h>
+#include <linux/of_fdt.h>
+#include <linux/of.h>
+#include <linux/memblock.h>
+#include <linux/device.h>
+
+#include <asm/sections.h>
+#include <asm/segment.h>
+#include <asm/pgtable.h>
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/cpuinfo.h>
+#include <asm/delay.h>
+
+#include "vmlinux.h"
+
+static void __init setup_memory(void)
+{
+	unsigned long ram_start_pfn;
+	unsigned long ram_end_pfn;
+	phys_addr_t memory_start, memory_end;
+	struct memblock_region *region;
+
+	memory_end = memory_start = 0;
+
+	/* Find main memory where is the kernel, we assume its the only one */
+	for_each_memblock(memory, region) {
+		memory_start = region->base;
+		memory_end = region->base + region->size;
+		printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
+		       memory_start, memory_end);
+	}
+
+	if (!memory_end) {
+		panic("No memory!");
+	}
+
+	ram_start_pfn = PFN_UP(memory_start);
+	ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
+
+	/* setup bootmem globals (we use no_bootmem, but mm still depends on this) */
+	min_low_pfn = ram_start_pfn;
+	max_low_pfn = ram_end_pfn;
+	max_pfn = ram_end_pfn;
+
+	/*
+	 * initialize the boot-time allocator (with low memory only).
+	 *
+	 * This makes the memory from the end of the kernel to the end of
+	 * RAM usable.
+	 */
+	memblock_reserve(__pa(_stext), _end - _stext);
+
+	early_init_fdt_reserve_self();
+	early_init_fdt_scan_reserved_mem();
+
+	memblock_dump_all();
+}
+
+struct cpuinfo cpuinfo;
+
+static void print_cpuinfo(void)
+{
+	unsigned long upr = mfspr(SPR_UPR);
+	unsigned long vr = mfspr(SPR_VR);
+	unsigned int version;
+	unsigned int revision;
+
+	version = (vr & SPR_VR_VER) >> 24;
+	revision = (vr & SPR_VR_REV);
+
+	printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n",
+	       version, revision, cpuinfo.clock_frequency / 1000000);
+
+	if (!(upr & SPR_UPR_UP)) {
+		printk(KERN_INFO
+		       "-- no UPR register... unable to detect configuration\n");
+		return;
+	}
+
+	if (upr & SPR_UPR_DCP)
+		printk(KERN_INFO
+		       "-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n",
+		       cpuinfo.dcache_size, cpuinfo.dcache_block_size,
+		       cpuinfo.dcache_ways);
+	else
+		printk(KERN_INFO "-- dcache disabled\n");
+	if (upr & SPR_UPR_ICP)
+		printk(KERN_INFO
+		       "-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n",
+		       cpuinfo.icache_size, cpuinfo.icache_block_size,
+		       cpuinfo.icache_ways);
+	else
+		printk(KERN_INFO "-- icache disabled\n");
+
+	if (upr & SPR_UPR_DMP)
+		printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n",
+		       1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
+		       1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
+	if (upr & SPR_UPR_IMP)
+		printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n",
+		       1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
+		       1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
+
+	printk(KERN_INFO "-- additional features:\n");
+	if (upr & SPR_UPR_DUP)
+		printk(KERN_INFO "-- debug unit\n");
+	if (upr & SPR_UPR_PCUP)
+		printk(KERN_INFO "-- performance counters\n");
+	if (upr & SPR_UPR_PMP)
+		printk(KERN_INFO "-- power management\n");
+	if (upr & SPR_UPR_PICP)
+		printk(KERN_INFO "-- PIC\n");
+	if (upr & SPR_UPR_TTP)
+		printk(KERN_INFO "-- timer\n");
+	if (upr & SPR_UPR_CUP)
+		printk(KERN_INFO "-- custom unit(s)\n");
+}
+
+void __init setup_cpuinfo(void)
+{
+	struct device_node *cpu;
+	unsigned long iccfgr, dccfgr;
+	unsigned long cache_set_size;
+
+	cpu = of_find_compatible_node(NULL, NULL, "opencores,or1200-rtlsvn481");
+	if (!cpu)
+		panic("No compatible CPU found in device tree...\n");
+
+	iccfgr = mfspr(SPR_ICCFGR);
+	cpuinfo.icache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW);
+	cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3);
+	cpuinfo.icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7);
+	cpuinfo.icache_size =
+	    cache_set_size * cpuinfo.icache_ways * cpuinfo.icache_block_size;
+
+	dccfgr = mfspr(SPR_DCCFGR);
+	cpuinfo.dcache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW);
+	cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3);
+	cpuinfo.dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7);
+	cpuinfo.dcache_size =
+	    cache_set_size * cpuinfo.dcache_ways * cpuinfo.dcache_block_size;
+
+	if (of_property_read_u32(cpu, "clock-frequency",
+				 &cpuinfo.clock_frequency)) {
+		printk(KERN_WARNING
+		       "Device tree missing CPU 'clock-frequency' parameter."
+		       "Assuming frequency 25MHZ"
+		       "This is probably not what you want.");
+	}
+
+	of_node_put(cpu);
+
+	print_cpuinfo();
+}
+
+/**
+ * or32_early_setup
+ *
+ * Handles the pointer to the device tree that this kernel is to use
+ * for establishing the available platform devices.
+ *
+ * Falls back on built-in device tree in case null pointer is passed.
+ */
+
+void __init or32_early_setup(void *fdt)
+{
+	if (fdt)
+		pr_info("FDT at %p\n", fdt);
+	else {
+		fdt = __dtb_start;
+		pr_info("Compiled-in FDT at %p\n", fdt);
+	}
+	early_init_devtree(fdt);
+}
+
+static inline unsigned long extract_value_bits(unsigned long reg,
+					       short bit_nr, short width)
+{
+	return (reg >> bit_nr) & (0 << width);
+}
+
+static inline unsigned long extract_value(unsigned long reg, unsigned long mask)
+{
+	while (!(mask & 0x1)) {
+		reg = reg >> 1;
+		mask = mask >> 1;
+	}
+	return mask & reg;
+}
+
+void __init detect_unit_config(unsigned long upr, unsigned long mask,
+			       char *text, void (*func) (void))
+{
+	if (text != NULL)
+		printk("%s", text);
+
+	if (upr & mask) {
+		if (func != NULL)
+			func();
+		else
+			printk("present\n");
+	} else
+		printk("not present\n");
+}
+
+/*
+ * calibrate_delay
+ *
+ * Lightweight calibrate_delay implementation that calculates loops_per_jiffy
+ * from the clock frequency passed in via the device tree
+ *
+ */
+
+void calibrate_delay(void)
+{
+	const int *val;
+	struct device_node *cpu = NULL;
+	cpu = of_find_compatible_node(NULL, NULL, "opencores,or1200-rtlsvn481");
+	val = of_get_property(cpu, "clock-frequency", NULL);
+	if (!val)
+		panic("no cpu 'clock-frequency' parameter in device tree");
+	loops_per_jiffy = *val / HZ;
+	pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
+		loops_per_jiffy / (500000 / HZ),
+		(loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+	unflatten_and_copy_device_tree();
+
+	setup_cpuinfo();
+
+	/* process 1's initial memory region is the kernel code/data */
+	init_mm.start_code = (unsigned long)_stext;
+	init_mm.end_code = (unsigned long)_etext;
+	init_mm.end_data = (unsigned long)_edata;
+	init_mm.brk = (unsigned long)_end;
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	initrd_start = (unsigned long)&__initrd_start;
+	initrd_end = (unsigned long)&__initrd_end;
+	if (initrd_start == initrd_end) {
+		initrd_start = 0;
+		initrd_end = 0;
+	}
+	initrd_below_start_ok = 1;
+#endif
+
+	/* setup memblock allocator */
+	setup_memory();
+
+	/* paging_init() sets up the MMU and marks all pages as reserved */
+	paging_init();
+
+#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
+	if (!conswitchp)
+		conswitchp = &dummy_con;
+#endif
+
+	*cmdline_p = boot_command_line;
+
+	printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n");
+}
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	unsigned long vr;
+	int version, revision;
+
+	vr = mfspr(SPR_VR);
+	version = (vr & SPR_VR_VER) >> 24;
+	revision = vr & SPR_VR_REV;
+
+	seq_printf(m,
+		  "cpu\t\t: OpenRISC-%x\n"
+		  "revision\t: %d\n"
+		  "frequency\t: %ld\n"
+		  "dcache size\t: %d bytes\n"
+		  "dcache block size\t: %d bytes\n"
+		  "dcache ways\t: %d\n"
+		  "icache size\t: %d bytes\n"
+		  "icache block size\t: %d bytes\n"
+		  "icache ways\t: %d\n"
+		  "immu\t\t: %d entries, %lu ways\n"
+		  "dmmu\t\t: %d entries, %lu ways\n"
+		  "bogomips\t: %lu.%02lu\n",
+		  version,
+		  revision,
+		  loops_per_jiffy * HZ,
+		  cpuinfo.dcache_size,
+		  cpuinfo.dcache_block_size,
+		  cpuinfo.dcache_ways,
+		  cpuinfo.icache_size,
+		  cpuinfo.icache_block_size,
+		  cpuinfo.icache_ways,
+		  1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
+		  1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW),
+		  1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
+		  1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW),
+		  (loops_per_jiffy * HZ) / 500000,
+		  ((loops_per_jiffy * HZ) / 5000) % 100);
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t * pos)
+{
+	/* We only have one CPU... */
+	return *pos < 1 ? (void *)1 : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t * pos)
+{
+	++*pos;
+	return NULL;
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+	.start = c_start,
+	.next = c_next,
+	.stop = c_stop,
+	.show = show_cpuinfo,
+};
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/signal.c b/src/kernel/linux/v4.14/arch/openrisc/kernel/signal.c
new file mode 100644
index 0000000..265f10f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/signal.c
@@ -0,0 +1,326 @@
+/*
+ * OpenRISC signal.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/tracehook.h>
+
+#include <asm/processor.h>
+#include <asm/syscall.h>
+#include <asm/ucontext.h>
+#include <linux/uaccess.h>
+
+#define DEBUG_SIG 0
+
+struct rt_sigframe {
+	struct siginfo info;
+	struct ucontext uc;
+	unsigned char retcode[16];	/* trampoline code */
+};
+
+static int restore_sigcontext(struct pt_regs *regs,
+			      struct sigcontext __user *sc)
+{
+	int err = 0;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current->restart_block.fn = do_no_restart_syscall;
+
+	/*
+	 * Restore the regs from &sc->regs.
+	 * (sc is already checked for VERIFY_READ since the sigframe was
+	 *  checked in sys_sigreturn previously)
+	 */
+	err |= __copy_from_user(regs, sc->regs.gpr, 32 * sizeof(unsigned long));
+	err |= __copy_from_user(&regs->pc, &sc->regs.pc, sizeof(unsigned long));
+	err |= __copy_from_user(&regs->sr, &sc->regs.sr, sizeof(unsigned long));
+
+	/* make sure the SM-bit is cleared so user-mode cannot fool us */
+	regs->sr &= ~SPR_SR_SM;
+
+	regs->orig_gpr11 = -1;	/* Avoid syscall restart checks */
+
+	/* TODO: the other ports use regs->orig_XX to disable syscall checks
+	 * after this completes, but we don't use that mechanism. maybe we can
+	 * use it now ?
+	 */
+
+	return err;
+}
+
+asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs)
+{
+	struct rt_sigframe *frame = (struct rt_sigframe __user *)regs->sp;
+	sigset_t set;
+
+	/*
+	 * Since we stacked the signal on a dword boundary,
+	 * then frame should be dword aligned here.  If it's
+	 * not, then the user is trying to mess with us.
+	 */
+	if (((long)frame) & 3)
+		goto badframe;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	set_current_blocked(&set);
+
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
+		goto badframe;
+
+	if (restore_altstack(&frame->uc.uc_stack))
+		goto badframe;
+
+	return regs->gpr[11];
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+/*
+ * Set up a signal frame.
+ */
+
+static int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+	int err = 0;
+
+	/* copy the regs */
+	/* There should be no need to save callee-saved registers here...
+	 * ...but we save them anyway.  Revisit this
+	 */
+	err |= __copy_to_user(sc->regs.gpr, regs, 32 * sizeof(unsigned long));
+	err |= __copy_to_user(&sc->regs.pc, &regs->pc, sizeof(unsigned long));
+	err |= __copy_to_user(&sc->regs.sr, &regs->sr, sizeof(unsigned long));
+
+	return err;
+}
+
+static inline unsigned long align_sigframe(unsigned long sp)
+{
+	return sp & ~3UL;
+}
+
+/*
+ * Work out where the signal frame should go.  It's either on the user stack
+ * or the alternate stack.
+ */
+
+static inline void __user *get_sigframe(struct ksignal *ksig,
+					struct pt_regs *regs, size_t frame_size)
+{
+	unsigned long sp = regs->sp;
+
+	/* redzone */
+	sp -= STACK_FRAME_OVERHEAD;
+	sp = sigsp(sp, ksig);
+	sp = align_sigframe(sp - frame_size);
+
+	return (void __user *)sp;
+}
+
+/* grab and setup a signal frame.
+ *
+ * basically we stack a lot of state info, and arrange for the
+ * user-mode program to return to the kernel using either a
+ * trampoline which performs the syscall sigreturn, or a provided
+ * user-mode trampoline.
+ */
+static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
+			  struct pt_regs *regs)
+{
+	struct rt_sigframe *frame;
+	unsigned long return_ip;
+	int err = 0;
+
+	frame = get_sigframe(ksig, regs, sizeof(*frame));
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		return -EFAULT;
+
+	/* Create siginfo.  */
+	if (ksig->ka.sa.sa_flags & SA_SIGINFO)
+		err |= copy_siginfo_to_user(&frame->info, &ksig->info);
+
+	/* Create the ucontext.  */
+	err |= __put_user(0, &frame->uc.uc_flags);
+	err |= __put_user(NULL, &frame->uc.uc_link);
+	err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
+	err |= setup_sigcontext(regs, &frame->uc.uc_mcontext);
+
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+	if (err)
+		return -EFAULT;
+
+	/* trampoline - the desired return ip is the retcode itself */
+	return_ip = (unsigned long)&frame->retcode;
+	/* This is:
+		l.ori r11,r0,__NR_sigreturn
+		l.sys 1
+	 */
+	err |= __put_user(0xa960,             (short *)(frame->retcode + 0));
+	err |= __put_user(__NR_rt_sigreturn,  (short *)(frame->retcode + 2));
+	err |= __put_user(0x20000001, (unsigned long *)(frame->retcode + 4));
+	err |= __put_user(0x15000000, (unsigned long *)(frame->retcode + 8));
+
+	if (err)
+		return -EFAULT;
+
+	/* Set up registers for signal handler */
+	regs->pc = (unsigned long)ksig->ka.sa.sa_handler; /* what we enter NOW */
+	regs->gpr[9] = (unsigned long)return_ip;     /* what we enter LATER */
+	regs->gpr[3] = (unsigned long)ksig->sig;           /* arg 1: signo */
+	regs->gpr[4] = (unsigned long)&frame->info;  /* arg 2: (siginfo_t*) */
+	regs->gpr[5] = (unsigned long)&frame->uc;    /* arg 3: ucontext */
+
+	/* actually move the usp to reflect the stacked frame */
+	regs->sp = (unsigned long)frame;
+
+	return 0;
+}
+
+static inline void
+handle_signal(struct ksignal *ksig, struct pt_regs *regs)
+{
+	int ret;
+
+	ret = setup_rt_frame(ksig, sigmask_to_save(), regs);
+
+	signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Also note that the regs structure given here as an argument, is the latest
+ * pushed pt_regs. It may or may not be the same as the first pushed registers
+ * when the initial usermode->kernelmode transition took place. Therefore
+ * we can use user_mode(regs) to see if we came directly from kernel or user
+ * mode below.
+ */
+
+int do_signal(struct pt_regs *regs, int syscall)
+{
+	struct ksignal ksig;
+	unsigned long continue_addr = 0;
+	unsigned long restart_addr = 0;
+	unsigned long retval = 0;
+	int restart = 0;
+
+	if (syscall) {
+		continue_addr = regs->pc;
+		restart_addr = continue_addr - 4;
+		retval = regs->gpr[11];
+
+		/*
+		 * Setup syscall restart here so that a debugger will
+		 * see the already changed PC.
+		 */
+		switch (retval) {
+		case -ERESTART_RESTARTBLOCK:
+			restart = -2;
+			/* Fall through */
+		case -ERESTARTNOHAND:
+		case -ERESTARTSYS:
+		case -ERESTARTNOINTR:
+			restart++;
+			regs->gpr[11] = regs->orig_gpr11;
+			regs->pc = restart_addr;
+			break;
+		}
+	}
+
+	/*
+	 * Get the signal to deliver.  During the call to get_signal the
+	 * debugger may change all our registers so we may need to revert
+	 * the decision to restart the syscall; specifically, if the PC is
+	 * changed, don't restart the syscall.
+	 */
+	if (get_signal(&ksig)) {
+		if (unlikely(restart) && regs->pc == restart_addr) {
+			if (retval == -ERESTARTNOHAND ||
+			    retval == -ERESTART_RESTARTBLOCK
+			    || (retval == -ERESTARTSYS
+			        && !(ksig.ka.sa.sa_flags & SA_RESTART))) {
+				/* No automatic restart */
+				regs->gpr[11] = -EINTR;
+				regs->pc = continue_addr;
+			}
+		}
+		handle_signal(&ksig, regs);
+	} else {
+		/* no handler */
+		restore_saved_sigmask();
+		/*
+		 * Restore pt_regs PC as syscall restart will be handled by
+		 * kernel without return to userspace
+		 */
+		if (unlikely(restart) && regs->pc == restart_addr) {
+			regs->pc = continue_addr;
+			return restart;
+		}
+	}
+
+	return 0;
+}
+
+asmlinkage int
+do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
+{
+	do {
+		if (likely(thread_flags & _TIF_NEED_RESCHED)) {
+			schedule();
+		} else {
+			if (unlikely(!user_mode(regs)))
+				return 0;
+			local_irq_enable();
+			if (thread_flags & _TIF_SIGPENDING) {
+				int restart = do_signal(regs, syscall);
+				if (unlikely(restart)) {
+					/*
+					 * Restart without handlers.
+					 * Deal with it without leaving
+					 * the kernel space.
+					 */
+					return restart;
+				}
+				syscall = 0;
+			} else {
+				clear_thread_flag(TIF_NOTIFY_RESUME);
+				tracehook_notify_resume(regs);
+			}
+		}
+		local_irq_disable();
+		thread_flags = current_thread_info()->flags;
+	} while (thread_flags & _TIF_WORK_MASK);
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/sys_call_table.c b/src/kernel/linux/v4.14/arch/openrisc/kernel/sys_call_table.c
new file mode 100644
index 0000000..e1f8ce8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/sys_call_table.c
@@ -0,0 +1,28 @@
+/*
+ * OpenRISC sys_call_table.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/syscalls.h>
+#include <linux/signal.h>
+#include <linux/unistd.h>
+
+#include <asm/syscalls.h>
+
+#undef __SYSCALL
+#define __SYSCALL(nr, call) [nr] = (call),
+
+void *sys_call_table[__NR_syscalls] = {
+#include <asm/unistd.h>
+};
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/time.c b/src/kernel/linux/v4.14/arch/openrisc/kernel/time.c
new file mode 100644
index 0000000..687c11d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/time.c
@@ -0,0 +1,154 @@
+/*
+ * OpenRISC time.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/interrupt.h>
+#include <linux/ftrace.h>
+
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/cpuinfo.h>
+
+static int openrisc_timer_set_next_event(unsigned long delta,
+					 struct clock_event_device *dev)
+{
+	u32 c;
+
+	/* Read 32-bit counter value, add delta, mask off the low 28 bits.
+	 * We're guaranteed delta won't be bigger than 28 bits because the
+	 * generic timekeeping code ensures that for us.
+	 */
+	c = mfspr(SPR_TTCR);
+	c += delta;
+	c &= SPR_TTMR_TP;
+
+	/* Set counter and enable interrupt.
+	 * Keep timer in continuous mode always.
+	 */
+	mtspr(SPR_TTMR, SPR_TTMR_CR | SPR_TTMR_IE | c);
+
+	return 0;
+}
+
+/* This is the clock event device based on the OR1K tick timer.
+ * As the timer is being used as a continuous clock-source (required for HR
+ * timers) we cannot enable the PERIODIC feature.  The tick timer can run using
+ * one-shot events, so no problem.
+ */
+
+static struct clock_event_device clockevent_openrisc_timer = {
+	.name = "openrisc_timer_clockevent",
+	.features = CLOCK_EVT_FEAT_ONESHOT,
+	.rating = 300,
+	.set_next_event = openrisc_timer_set_next_event,
+};
+
+static inline void timer_ack(void)
+{
+	/* Clear the IP bit and disable further interrupts */
+	/* This can be done very simply... we just need to keep the timer
+	   running, so just maintain the CR bits while clearing the rest
+	   of the register
+	 */
+	mtspr(SPR_TTMR, SPR_TTMR_CR);
+}
+
+/*
+ * The timer interrupt is mostly handled in generic code nowadays... this
+ * function just acknowledges the interrupt and fires the event handler that
+ * has been set on the clockevent device by the generic time management code.
+ *
+ * This function needs to be called by the timer exception handler and that's
+ * all the exception handler needs to do.
+ */
+
+irqreturn_t __irq_entry timer_interrupt(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+	struct clock_event_device *evt = &clockevent_openrisc_timer;
+
+	timer_ack();
+
+	/*
+	 * update_process_times() expects us to have called irq_enter().
+	 */
+	irq_enter();
+	evt->event_handler(evt);
+	irq_exit();
+
+	set_irq_regs(old_regs);
+
+	return IRQ_HANDLED;
+}
+
+static __init void openrisc_clockevent_init(void)
+{
+	clockevent_openrisc_timer.cpumask = cpumask_of(0);
+
+	/* We only have 28 bits */
+	clockevents_config_and_register(&clockevent_openrisc_timer,
+					cpuinfo.clock_frequency,
+					100, 0x0fffffff);
+
+}
+
+/**
+ * Clocksource: Based on OpenRISC timer/counter
+ *
+ * This sets up the OpenRISC Tick Timer as a clock source.  The tick timer
+ * is 32 bits wide and runs at the CPU clock frequency.
+ */
+
+static u64 openrisc_timer_read(struct clocksource *cs)
+{
+	return (u64) mfspr(SPR_TTCR);
+}
+
+static struct clocksource openrisc_timer = {
+	.name = "openrisc_timer",
+	.rating = 200,
+	.read = openrisc_timer_read,
+	.mask = CLOCKSOURCE_MASK(32),
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init openrisc_timer_init(void)
+{
+	if (clocksource_register_hz(&openrisc_timer, cpuinfo.clock_frequency))
+		panic("failed to register clocksource");
+
+	/* Enable the incrementer: 'continuous' mode with interrupt disabled */
+	mtspr(SPR_TTMR, SPR_TTMR_CR);
+
+	return 0;
+}
+
+void __init time_init(void)
+{
+	u32 upr;
+
+	upr = mfspr(SPR_UPR);
+	if (!(upr & SPR_UPR_TTP))
+		panic("Linux not supported on devices without tick timer");
+
+	openrisc_timer_init();
+	openrisc_clockevent_init();
+}
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/traps.c b/src/kernel/linux/v4.14/arch/openrisc/kernel/traps.c
new file mode 100644
index 0000000..0d44e80
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/traps.c
@@ -0,0 +1,540 @@
+/*
+ * OpenRISC traps.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ *  Here we handle the break vectors not used by the system call
+ *  mechanism, as well as some general stack/register dumping
+ *  things.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task_stack.h>
+#include <linux/kernel.h>
+#include <linux/extable.h>
+#include <linux/kmod.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/kallsyms.h>
+#include <linux/uaccess.h>
+
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+
+extern char _etext, _stext;
+
+int kstack_depth_to_print = 0x180;
+int lwa_flag;
+unsigned long __user *lwa_addr;
+
+static inline int valid_stack_ptr(struct thread_info *tinfo, void *p)
+{
+	return p > (void *)tinfo && p < (void *)tinfo + THREAD_SIZE - 3;
+}
+
+void show_trace(struct task_struct *task, unsigned long *stack)
+{
+	struct thread_info *context;
+	unsigned long addr;
+
+	context = (struct thread_info *)
+	    ((unsigned long)stack & (~(THREAD_SIZE - 1)));
+
+	while (valid_stack_ptr(context, stack)) {
+		addr = *stack++;
+		if (__kernel_text_address(addr)) {
+			printk(" [<%08lx>]", addr);
+			print_symbol(" %s", addr);
+			printk("\n");
+		}
+	}
+	printk(" =======================\n");
+}
+
+/* displays a short stack trace */
+void show_stack(struct task_struct *task, unsigned long *esp)
+{
+	unsigned long addr, *stack;
+	int i;
+
+	if (esp == NULL)
+		esp = (unsigned long *)&esp;
+
+	stack = esp;
+
+	printk("Stack dump [0x%08lx]:\n", (unsigned long)esp);
+	for (i = 0; i < kstack_depth_to_print; i++) {
+		if (kstack_end(stack))
+			break;
+		if (__get_user(addr, stack)) {
+			/* This message matches "failing address" marked
+			   s390 in ksymoops, so lines containing it will
+			   not be filtered out by ksymoops.  */
+			printk("Failing address 0x%lx\n", (unsigned long)stack);
+			break;
+		}
+		stack++;
+
+		printk("sp + %02d: 0x%08lx\n", i * 4, addr);
+	}
+	printk("\n");
+
+	show_trace(task, esp);
+
+	return;
+}
+
+void show_trace_task(struct task_struct *tsk)
+{
+	/*
+	 * TODO: SysRq-T trace dump...
+	 */
+}
+
+void show_registers(struct pt_regs *regs)
+{
+	int i;
+	int in_kernel = 1;
+	unsigned long esp;
+
+	esp = (unsigned long)(&regs->sp);
+	if (user_mode(regs))
+		in_kernel = 0;
+
+	printk("CPU #: %d\n"
+	       "   PC: %08lx    SR: %08lx    SP: %08lx\n",
+	       smp_processor_id(), regs->pc, regs->sr, regs->sp);
+	printk("GPR00: %08lx GPR01: %08lx GPR02: %08lx GPR03: %08lx\n",
+	       0L, regs->gpr[1], regs->gpr[2], regs->gpr[3]);
+	printk("GPR04: %08lx GPR05: %08lx GPR06: %08lx GPR07: %08lx\n",
+	       regs->gpr[4], regs->gpr[5], regs->gpr[6], regs->gpr[7]);
+	printk("GPR08: %08lx GPR09: %08lx GPR10: %08lx GPR11: %08lx\n",
+	       regs->gpr[8], regs->gpr[9], regs->gpr[10], regs->gpr[11]);
+	printk("GPR12: %08lx GPR13: %08lx GPR14: %08lx GPR15: %08lx\n",
+	       regs->gpr[12], regs->gpr[13], regs->gpr[14], regs->gpr[15]);
+	printk("GPR16: %08lx GPR17: %08lx GPR18: %08lx GPR19: %08lx\n",
+	       regs->gpr[16], regs->gpr[17], regs->gpr[18], regs->gpr[19]);
+	printk("GPR20: %08lx GPR21: %08lx GPR22: %08lx GPR23: %08lx\n",
+	       regs->gpr[20], regs->gpr[21], regs->gpr[22], regs->gpr[23]);
+	printk("GPR24: %08lx GPR25: %08lx GPR26: %08lx GPR27: %08lx\n",
+	       regs->gpr[24], regs->gpr[25], regs->gpr[26], regs->gpr[27]);
+	printk("GPR28: %08lx GPR29: %08lx GPR30: %08lx GPR31: %08lx\n",
+	       regs->gpr[28], regs->gpr[29], regs->gpr[30], regs->gpr[31]);
+	printk("  RES: %08lx oGPR11: %08lx\n",
+	       regs->gpr[11], regs->orig_gpr11);
+
+	printk("Process %s (pid: %d, stackpage=%08lx)\n",
+	       current->comm, current->pid, (unsigned long)current);
+	/*
+	 * When in-kernel, we also print out the stack and code at the
+	 * time of the fault..
+	 */
+	if (in_kernel) {
+
+		printk("\nStack: ");
+		show_stack(NULL, (unsigned long *)esp);
+
+		printk("\nCode: ");
+		if (regs->pc < PAGE_OFFSET)
+			goto bad;
+
+		for (i = -24; i < 24; i++) {
+			unsigned char c;
+			if (__get_user(c, &((unsigned char *)regs->pc)[i])) {
+bad:
+				printk(" Bad PC value.");
+				break;
+			}
+
+			if (i == 0)
+				printk("(%02x) ", c);
+			else
+				printk("%02x ", c);
+		}
+	}
+	printk("\n");
+}
+
+void nommu_dump_state(struct pt_regs *regs,
+		      unsigned long ea, unsigned long vector)
+{
+	int i;
+	unsigned long addr, stack = regs->sp;
+
+	printk("\n\r[nommu_dump_state] :: ea %lx, vector %lx\n\r", ea, vector);
+
+	printk("CPU #: %d\n"
+	       "   PC: %08lx    SR: %08lx    SP: %08lx\n",
+	       0, regs->pc, regs->sr, regs->sp);
+	printk("GPR00: %08lx GPR01: %08lx GPR02: %08lx GPR03: %08lx\n",
+	       0L, regs->gpr[1], regs->gpr[2], regs->gpr[3]);
+	printk("GPR04: %08lx GPR05: %08lx GPR06: %08lx GPR07: %08lx\n",
+	       regs->gpr[4], regs->gpr[5], regs->gpr[6], regs->gpr[7]);
+	printk("GPR08: %08lx GPR09: %08lx GPR10: %08lx GPR11: %08lx\n",
+	       regs->gpr[8], regs->gpr[9], regs->gpr[10], regs->gpr[11]);
+	printk("GPR12: %08lx GPR13: %08lx GPR14: %08lx GPR15: %08lx\n",
+	       regs->gpr[12], regs->gpr[13], regs->gpr[14], regs->gpr[15]);
+	printk("GPR16: %08lx GPR17: %08lx GPR18: %08lx GPR19: %08lx\n",
+	       regs->gpr[16], regs->gpr[17], regs->gpr[18], regs->gpr[19]);
+	printk("GPR20: %08lx GPR21: %08lx GPR22: %08lx GPR23: %08lx\n",
+	       regs->gpr[20], regs->gpr[21], regs->gpr[22], regs->gpr[23]);
+	printk("GPR24: %08lx GPR25: %08lx GPR26: %08lx GPR27: %08lx\n",
+	       regs->gpr[24], regs->gpr[25], regs->gpr[26], regs->gpr[27]);
+	printk("GPR28: %08lx GPR29: %08lx GPR30: %08lx GPR31: %08lx\n",
+	       regs->gpr[28], regs->gpr[29], regs->gpr[30], regs->gpr[31]);
+	printk("  RES: %08lx oGPR11: %08lx\n",
+	       regs->gpr[11], regs->orig_gpr11);
+
+	printk("Process %s (pid: %d, stackpage=%08lx)\n",
+	       ((struct task_struct *)(__pa(current)))->comm,
+	       ((struct task_struct *)(__pa(current)))->pid,
+	       (unsigned long)current);
+
+	printk("\nStack: ");
+	printk("Stack dump [0x%08lx]:\n", (unsigned long)stack);
+	for (i = 0; i < kstack_depth_to_print; i++) {
+		if (((long)stack & (THREAD_SIZE - 1)) == 0)
+			break;
+		stack++;
+
+		printk("%lx :: sp + %02d: 0x%08lx\n", stack, i * 4,
+		       *((unsigned long *)(__pa(stack))));
+	}
+	printk("\n");
+
+	printk("Call Trace:   ");
+	i = 1;
+	while (((long)stack & (THREAD_SIZE - 1)) != 0) {
+		addr = *((unsigned long *)__pa(stack));
+		stack++;
+
+		if (kernel_text_address(addr)) {
+			if (i && ((i % 6) == 0))
+				printk("\n ");
+			printk(" [<%08lx>]", addr);
+			i++;
+		}
+	}
+	printk("\n");
+
+	printk("\nCode: ");
+
+	for (i = -24; i < 24; i++) {
+		unsigned char c;
+		c = ((unsigned char *)(__pa(regs->pc)))[i];
+
+		if (i == 0)
+			printk("(%02x) ", c);
+		else
+			printk("%02x ", c);
+	}
+	printk("\n");
+}
+
+/* This is normally the 'Oops' routine */
+void die(const char *str, struct pt_regs *regs, long err)
+{
+
+	console_verbose();
+	printk("\n%s#: %04lx\n", str, err & 0xffff);
+	show_registers(regs);
+#ifdef CONFIG_JUMP_UPON_UNHANDLED_EXCEPTION
+	printk("\n\nUNHANDLED_EXCEPTION: entering infinite loop\n");
+
+	/* shut down interrupts */
+	local_irq_disable();
+
+	__asm__ __volatile__("l.nop   1");
+	do {} while (1);
+#endif
+	do_exit(SIGSEGV);
+}
+
+/* This is normally the 'Oops' routine */
+void die_if_kernel(const char *str, struct pt_regs *regs, long err)
+{
+	if (user_mode(regs))
+		return;
+
+	die(str, regs, err);
+}
+
+void unhandled_exception(struct pt_regs *regs, int ea, int vector)
+{
+	printk("Unable to handle exception at EA =0x%x, vector 0x%x",
+	       ea, vector);
+	die("Oops", regs, 9);
+}
+
+void __init trap_init(void)
+{
+	/* Nothing needs to be done */
+}
+
+asmlinkage void do_trap(struct pt_regs *regs, unsigned long address)
+{
+	siginfo_t info;
+	memset(&info, 0, sizeof(info));
+	info.si_signo = SIGTRAP;
+	info.si_code = TRAP_TRACE;
+	info.si_addr = (void *)address;
+	force_sig_info(SIGTRAP, &info, current);
+
+	regs->pc += 4;
+}
+
+asmlinkage void do_unaligned_access(struct pt_regs *regs, unsigned long address)
+{
+	siginfo_t info;
+
+	if (user_mode(regs)) {
+		/* Send a SIGBUS */
+		info.si_signo = SIGBUS;
+		info.si_errno = 0;
+		info.si_code = BUS_ADRALN;
+		info.si_addr = (void __user *)address;
+		force_sig_info(SIGBUS, &info, current);
+	} else {
+		printk("KERNEL: Unaligned Access 0x%.8lx\n", address);
+		show_registers(regs);
+		die("Die:", regs, address);
+	}
+
+}
+
+asmlinkage void do_bus_fault(struct pt_regs *regs, unsigned long address)
+{
+	siginfo_t info;
+
+	if (user_mode(regs)) {
+		/* Send a SIGBUS */
+		info.si_signo = SIGBUS;
+		info.si_errno = 0;
+		info.si_code = BUS_ADRERR;
+		info.si_addr = (void *)address;
+		force_sig_info(SIGBUS, &info, current);
+	} else {		/* Kernel mode */
+		printk("KERNEL: Bus error (SIGBUS) 0x%.8lx\n", address);
+		show_registers(regs);
+		die("Die:", regs, address);
+	}
+}
+
+static inline int in_delay_slot(struct pt_regs *regs)
+{
+#ifdef CONFIG_OPENRISC_NO_SPR_SR_DSX
+	/* No delay slot flag, do the old way */
+	unsigned int op, insn;
+
+	insn = *((unsigned int *)regs->pc);
+	op = insn >> 26;
+	switch (op) {
+	case 0x00: /* l.j */
+	case 0x01: /* l.jal */
+	case 0x03: /* l.bnf */
+	case 0x04: /* l.bf */
+	case 0x11: /* l.jr */
+	case 0x12: /* l.jalr */
+		return 1;
+	default:
+		return 0;
+	}
+#else
+	return mfspr(SPR_SR) & SPR_SR_DSX;
+#endif
+}
+
+static inline void adjust_pc(struct pt_regs *regs, unsigned long address)
+{
+	int displacement;
+	unsigned int rb, op, jmp;
+
+	if (unlikely(in_delay_slot(regs))) {
+		/* In delay slot, instruction at pc is a branch, simulate it */
+		jmp = *((unsigned int *)regs->pc);
+
+		displacement = sign_extend32(((jmp) & 0x3ffffff) << 2, 27);
+		rb = (jmp & 0x0000ffff) >> 11;
+		op = jmp >> 26;
+
+		switch (op) {
+		case 0x00: /* l.j */
+			regs->pc += displacement;
+			return;
+		case 0x01: /* l.jal */
+			regs->pc += displacement;
+			regs->gpr[9] = regs->pc + 8;
+			return;
+		case 0x03: /* l.bnf */
+			if (regs->sr & SPR_SR_F)
+				regs->pc += 8;
+			else
+				regs->pc += displacement;
+			return;
+		case 0x04: /* l.bf */
+			if (regs->sr & SPR_SR_F)
+				regs->pc += displacement;
+			else
+				regs->pc += 8;
+			return;
+		case 0x11: /* l.jr */
+			regs->pc = regs->gpr[rb];
+			return;
+		case 0x12: /* l.jalr */
+			regs->pc = regs->gpr[rb];
+			regs->gpr[9] = regs->pc + 8;
+			return;
+		default:
+			break;
+		}
+	} else {
+		regs->pc += 4;
+	}
+}
+
+static inline void simulate_lwa(struct pt_regs *regs, unsigned long address,
+				unsigned int insn)
+{
+	unsigned int ra, rd;
+	unsigned long value;
+	unsigned long orig_pc;
+	long imm;
+
+	const struct exception_table_entry *entry;
+
+	orig_pc = regs->pc;
+	adjust_pc(regs, address);
+
+	ra = (insn >> 16) & 0x1f;
+	rd = (insn >> 21) & 0x1f;
+	imm = (short)insn;
+	lwa_addr = (unsigned long __user *)(regs->gpr[ra] + imm);
+
+	if ((unsigned long)lwa_addr & 0x3) {
+		do_unaligned_access(regs, address);
+		return;
+	}
+
+	if (get_user(value, lwa_addr)) {
+		if (user_mode(regs)) {
+			force_sig(SIGSEGV, current);
+			return;
+		}
+
+		if ((entry = search_exception_tables(orig_pc))) {
+			regs->pc = entry->fixup;
+			return;
+		}
+
+		/* kernel access in kernel space, load it directly */
+		value = *((unsigned long *)lwa_addr);
+	}
+
+	lwa_flag = 1;
+	regs->gpr[rd] = value;
+}
+
+static inline void simulate_swa(struct pt_regs *regs, unsigned long address,
+				unsigned int insn)
+{
+	unsigned long __user *vaddr;
+	unsigned long orig_pc;
+	unsigned int ra, rb;
+	long imm;
+
+	const struct exception_table_entry *entry;
+
+	orig_pc = regs->pc;
+	adjust_pc(regs, address);
+
+	ra = (insn >> 16) & 0x1f;
+	rb = (insn >> 11) & 0x1f;
+	imm = (short)(((insn & 0x2200000) >> 10) | (insn & 0x7ff));
+	vaddr = (unsigned long __user *)(regs->gpr[ra] + imm);
+
+	if (!lwa_flag || vaddr != lwa_addr) {
+		regs->sr &= ~SPR_SR_F;
+		return;
+	}
+
+	if ((unsigned long)vaddr & 0x3) {
+		do_unaligned_access(regs, address);
+		return;
+	}
+
+	if (put_user(regs->gpr[rb], vaddr)) {
+		if (user_mode(regs)) {
+			force_sig(SIGSEGV, current);
+			return;
+		}
+
+		if ((entry = search_exception_tables(orig_pc))) {
+			regs->pc = entry->fixup;
+			return;
+		}
+
+		/* kernel access in kernel space, store it directly */
+		*((unsigned long *)vaddr) = regs->gpr[rb];
+	}
+
+	lwa_flag = 0;
+	regs->sr |= SPR_SR_F;
+}
+
+#define INSN_LWA	0x1b
+#define INSN_SWA	0x33
+
+asmlinkage void do_illegal_instruction(struct pt_regs *regs,
+				       unsigned long address)
+{
+	siginfo_t info;
+	unsigned int op;
+	unsigned int insn = *((unsigned int *)address);
+
+	op = insn >> 26;
+
+	switch (op) {
+	case INSN_LWA:
+		simulate_lwa(regs, address, insn);
+		return;
+
+	case INSN_SWA:
+		simulate_swa(regs, address, insn);
+		return;
+
+	default:
+		break;
+	}
+
+	if (user_mode(regs)) {
+		/* Send a SIGILL */
+		info.si_signo = SIGILL;
+		info.si_errno = 0;
+		info.si_code = ILL_ILLOPC;
+		info.si_addr = (void *)address;
+		force_sig_info(SIGBUS, &info, current);
+	} else {		/* Kernel mode */
+		printk("KERNEL: Illegal instruction (SIGILL) 0x%.8lx\n",
+		       address);
+		show_registers(regs);
+		die("Die:", regs, address);
+	}
+}
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/vmlinux.h b/src/kernel/linux/v4.14/arch/openrisc/kernel/vmlinux.h
new file mode 100644
index 0000000..bdea46c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/vmlinux.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __OPENRISC_VMLINUX_H_
+#define __OPENRISC_VMLINUX_H_
+
+#ifdef CONFIG_BLK_DEV_INITRD
+extern char __initrd_start, __initrd_end;
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/openrisc/kernel/vmlinux.lds.S b/src/kernel/linux/v4.14/arch/openrisc/kernel/vmlinux.lds.S
new file mode 100644
index 0000000..00ddb78
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/kernel/vmlinux.lds.S
@@ -0,0 +1,125 @@
+/*
+ * OpenRISC vmlinux.lds.S
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ * ld script for OpenRISC architecture
+ */
+
+/* TODO
+ *		- clean up __offset & stuff
+ *		- change all 8192 alignment to PAGE !!!
+ *		- recheck if all alignments are really needed
+ */
+
+#  define LOAD_OFFSET  PAGE_OFFSET
+#  define LOAD_BASE    PAGE_OFFSET
+
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm-generic/vmlinux.lds.h>
+
+#ifdef __OR1K__
+#define __OUTPUT_FORMAT        "elf32-or1k"
+#else
+#define __OUTPUT_FORMAT        "elf32-or32"
+#endif
+
+OUTPUT_FORMAT(__OUTPUT_FORMAT, __OUTPUT_FORMAT, __OUTPUT_FORMAT)
+jiffies = jiffies_64 + 4;
+
+SECTIONS
+{
+        /* Read-only sections, merged into text segment: */
+        . = LOAD_BASE ;
+
+	_text = .;
+
+	/* _s_kernel_ro must be page aligned */
+	. = ALIGN(PAGE_SIZE);
+	_s_kernel_ro = .;
+
+        .text                   : AT(ADDR(.text) - LOAD_OFFSET)
+	{
+          _stext = .;
+	  TEXT_TEXT
+	  SCHED_TEXT
+	  CPUIDLE_TEXT
+	  LOCK_TEXT
+	  KPROBES_TEXT
+	  IRQENTRY_TEXT
+	  SOFTIRQENTRY_TEXT
+	  *(.fixup)
+	  *(.text.__*)
+	  _etext = .;
+	}
+	/* TODO: Check if fixup and text.__* are really necessary
+	 * fixup is definitely necessary
+	 */
+
+	_sdata = .;
+
+	/* Page alignment required for RO_DATA_SECTION */
+	RO_DATA_SECTION(PAGE_SIZE)
+	_e_kernel_ro = .;
+
+	/* Whatever comes after _e_kernel_ro had better be page-aligend, too */
+
+	/* 32 here is cacheline size... recheck this */
+	RW_DATA_SECTION(32, PAGE_SIZE, PAGE_SIZE)
+
+        _edata  =  .;
+
+	EXCEPTION_TABLE(4)
+	NOTES
+
+	/* Init code and data */
+	. = ALIGN(PAGE_SIZE);
+	__init_begin = .;
+
+	HEAD_TEXT_SECTION
+
+	/* Page aligned */
+	INIT_TEXT_SECTION(PAGE_SIZE)
+
+	/* Align __setup_start on 16 byte boundary */
+	INIT_DATA_SECTION(16)
+
+	PERCPU_SECTION(L1_CACHE_BYTES)
+
+        __init_end = .;
+
+	. = ALIGN(PAGE_SIZE);
+	.initrd			: AT(ADDR(.initrd) - LOAD_OFFSET)
+	{
+		__initrd_start = .;
+		*(.initrd)
+		__initrd_end = .;
+		FILL (0);
+                . = ALIGN (PAGE_SIZE);
+	}
+
+        __vmlinux_end = .;            /* last address of the physical file */
+
+	BSS_SECTION(0, 0, 0x20)
+
+        _end = .;
+
+	/* Throw in the debugging sections */
+	STABS_DEBUG
+	DWARF_DEBUG
+
+        /* Sections to be discarded -- must be last */
+	DISCARDS
+}
diff --git a/src/kernel/linux/v4.14/arch/openrisc/lib/Makefile b/src/kernel/linux/v4.14/arch/openrisc/lib/Makefile
new file mode 100644
index 0000000..17d9d37
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/lib/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for or32 specific library files..
+#
+
+obj-y	:= delay.o string.o memset.o memcpy.o
diff --git a/src/kernel/linux/v4.14/arch/openrisc/lib/delay.c b/src/kernel/linux/v4.14/arch/openrisc/lib/delay.c
new file mode 100644
index 0000000..8b13fdf
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/lib/delay.c
@@ -0,0 +1,61 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      version 2 as published by the Free Software Foundation
+ *
+ * Precise Delay Loops
+ */
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <asm/param.h>
+#include <asm/delay.h>
+#include <asm/timex.h>
+#include <asm/processor.h>
+
+int read_current_timer(unsigned long *timer_value)
+{
+	*timer_value = mfspr(SPR_TTCR);
+	return 0;
+}
+
+void __delay(unsigned long cycles)
+{
+	cycles_t start = get_cycles();
+
+	while ((get_cycles() - start) < cycles)
+		cpu_relax();
+}
+EXPORT_SYMBOL(__delay);
+
+inline void __const_udelay(unsigned long xloops)
+{
+	unsigned long long loops;
+
+	loops = (unsigned long long)xloops * loops_per_jiffy * HZ;
+
+	__delay(loops >> 32);
+}
+EXPORT_SYMBOL(__const_udelay);
+
+void __udelay(unsigned long usecs)
+{
+	__const_udelay(usecs * 0x10C7UL); /* 2**32 / 1000000 (rounded up) */
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long nsecs)
+{
+	__const_udelay(nsecs * 0x5UL); /* 2**32 / 1000000000 (rounded up) */
+}
+EXPORT_SYMBOL(__ndelay);
diff --git a/src/kernel/linux/v4.14/arch/openrisc/lib/memcpy.c b/src/kernel/linux/v4.14/arch/openrisc/lib/memcpy.c
new file mode 100644
index 0000000..fe21776
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/lib/memcpy.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/openrisc/lib/memcpy.c
+ *
+ * Optimized memory copy routines for openrisc.  These are mostly copied
+ * from ohter sources but slightly entended based on ideas discuassed in
+ * #openrisc.
+ *
+ * The word unroll implementation is an extension to the arm byte
+ * unrolled implementation, but using word copies (if things are
+ * properly aligned)
+ *
+ * The great arm loop unroll algorithm can be found at:
+ *  arch/arm/boot/compressed/string.c
+ */
+
+#include <linux/export.h>
+
+#include <linux/string.h>
+
+#ifdef CONFIG_OR1K_1200
+/*
+ * Do memcpy with word copies and loop unrolling. This gives the
+ * best performance on the OR1200 and MOR1KX archirectures
+ */
+void *memcpy(void *dest, __const void *src, __kernel_size_t n)
+{
+	int i = 0;
+	unsigned char *d, *s;
+	uint32_t *dest_w = (uint32_t *)dest, *src_w = (uint32_t *)src;
+
+	/* If both source and dest are word aligned copy words */
+	if (!((unsigned int)dest_w & 3) && !((unsigned int)src_w & 3)) {
+		/* Copy 32 bytes per loop */
+		for (i = n >> 5; i > 0; i--) {
+			*dest_w++ = *src_w++;
+			*dest_w++ = *src_w++;
+			*dest_w++ = *src_w++;
+			*dest_w++ = *src_w++;
+			*dest_w++ = *src_w++;
+			*dest_w++ = *src_w++;
+			*dest_w++ = *src_w++;
+			*dest_w++ = *src_w++;
+		}
+
+		if (n & 1 << 4) {
+			*dest_w++ = *src_w++;
+			*dest_w++ = *src_w++;
+			*dest_w++ = *src_w++;
+			*dest_w++ = *src_w++;
+		}
+
+		if (n & 1 << 3) {
+			*dest_w++ = *src_w++;
+			*dest_w++ = *src_w++;
+		}
+
+		if (n & 1 << 2)
+			*dest_w++ = *src_w++;
+
+		d = (unsigned char *)dest_w;
+		s = (unsigned char *)src_w;
+
+	} else {
+		d = (unsigned char *)dest_w;
+		s = (unsigned char *)src_w;
+
+		for (i = n >> 3; i > 0; i--) {
+			*d++ = *s++;
+			*d++ = *s++;
+			*d++ = *s++;
+			*d++ = *s++;
+			*d++ = *s++;
+			*d++ = *s++;
+			*d++ = *s++;
+			*d++ = *s++;
+		}
+
+		if (n & 1 << 2) {
+			*d++ = *s++;
+			*d++ = *s++;
+			*d++ = *s++;
+			*d++ = *s++;
+		}
+	}
+
+	if (n & 1 << 1) {
+		*d++ = *s++;
+		*d++ = *s++;
+	}
+
+	if (n & 1)
+		*d++ = *s++;
+
+	return dest;
+}
+#else
+/*
+ * Use word copies but no loop unrolling as we cannot assume there
+ * will be benefits on the archirecture
+ */
+void *memcpy(void *dest, __const void *src, __kernel_size_t n)
+{
+	unsigned char *d = (unsigned char *)dest, *s = (unsigned char *)src;
+	uint32_t *dest_w = (uint32_t *)dest, *src_w = (uint32_t *)src;
+
+	/* If both source and dest are word aligned copy words */
+	if (!((unsigned int)dest_w & 3) && !((unsigned int)src_w & 3)) {
+		for (; n >= 4; n -= 4)
+			*dest_w++ = *src_w++;
+	}
+
+	d = (unsigned char *)dest_w;
+	s = (unsigned char *)src_w;
+
+	/* For remaining or if not aligned, copy bytes */
+	for (; n >= 1; n -= 1)
+		*d++ = *s++;
+
+	return dest;
+
+}
+#endif
+
+EXPORT_SYMBOL(memcpy);
diff --git a/src/kernel/linux/v4.14/arch/openrisc/lib/memset.S b/src/kernel/linux/v4.14/arch/openrisc/lib/memset.S
new file mode 100644
index 0000000..92cc2ea
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/lib/memset.S
@@ -0,0 +1,98 @@
+/*
+ * OpenRISC memset.S
+ *
+ * Hand-optimized assembler version of memset for OpenRISC.
+ * Algorithm inspired by several other arch-specific memset routines
+ * in the kernel tree
+ *
+ * Copyright (C) 2015 Olof Kindgren <olof.kindgren@gmail.com>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+	.global memset
+	.type	memset, @function
+memset:
+	/* arguments:
+	 * r3 = *s
+	 * r4 = c
+	 * r5 = n
+	 * r13, r15, r17, r19 used as temp regs
+	*/
+
+	/* Exit if n == 0 */
+	l.sfeqi		r5, 0
+	l.bf		4f
+
+	/* Truncate c to char */
+	l.andi  	r13, r4, 0xff
+
+	/* Skip word extension if c is 0 */
+	l.sfeqi		r13, 0
+	l.bf		1f
+	/* Check for at least two whole words (8 bytes) */
+	 l.sfleui	r5, 7
+
+	/* Extend char c to 32-bit word cccc in r13 */
+	l.slli		r15, r13, 16  // r13 = 000c, r15 = 0c00
+	l.or		r13, r13, r15 // r13 = 0c0c, r15 = 0c00
+	l.slli		r15, r13, 8   // r13 = 0c0c, r15 = c0c0
+	l.or		r13, r13, r15 // r13 = cccc, r15 = c0c0
+
+1:	l.addi		r19, r3, 0 // Set r19 = src
+	/* Jump to byte copy loop if less than two words */
+	l.bf		3f
+	 l.or		r17, r5, r0 // Set r17 = n
+
+	/* Mask out two LSBs to check alignment */
+	l.andi		r15, r3, 0x3
+
+	/* lsb == 00, jump to word copy loop */
+	l.sfeqi		r15, 0
+	l.bf		2f
+	 l.addi		r19, r3, 0 // Set r19 = src
+
+	/* lsb == 01,10 or 11 */
+	l.sb		0(r3), r13   // *src = c
+	l.addi		r17, r17, -1 // Decrease n
+
+	l.sfeqi		r15, 3
+	l.bf		2f
+	 l.addi		r19, r3, 1  // src += 1
+
+	/* lsb == 01 or 10 */
+	l.sb		1(r3), r13   // *(src+1) = c
+	l.addi		r17, r17, -1 // Decrease n
+
+	l.sfeqi		r15, 2
+	l.bf		2f
+	 l.addi		r19, r3, 2  // src += 2
+
+	/* lsb == 01 */
+	l.sb		2(r3), r13   // *(src+2) = c
+	l.addi		r17, r17, -1 // Decrease n
+	l.addi		r19, r3, 3   // src += 3
+
+	/* Word copy loop */
+2:	l.sw		0(r19), r13  // *src = cccc
+	l.addi		r17, r17, -4 // Decrease n
+	l.sfgeui	r17, 4
+	l.bf		2b
+	 l.addi		r19, r19, 4  // Increase src
+
+	/* When n > 0, copy the remaining bytes, otherwise jump to exit */
+	l.sfeqi		r17, 0
+	l.bf		4f
+
+	/* Byte copy loop */
+3:	l.addi		r17, r17, -1 // Decrease n
+	l.sb		0(r19), r13  // *src = cccc
+	l.sfnei		r17, 0
+	l.bf		3b
+	 l.addi		r19, r19, 1  // Increase src
+
+4:	l.jr		r9
+	 l.ori		r11, r3, 0
diff --git a/src/kernel/linux/v4.14/arch/openrisc/lib/string.S b/src/kernel/linux/v4.14/arch/openrisc/lib/string.S
new file mode 100644
index 0000000..c09fee7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/lib/string.S
@@ -0,0 +1,105 @@
+/*
+ * OpenRISC string.S
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/linkage.h>
+#include <asm/errno.h>
+
+	/*
+	 * this can be optimized by doing gcc inline assemlby with
+	 * proper constraints (no need to save args registers...)
+	 *
+	 */
+
+
+/*
+ *
+ * int __copy_tofrom_user(void *to, const void *from, unsigned long size);
+ *
+ * NOTE: it returns number of bytes NOT copied !!!
+ *
+ */
+	.global	__copy_tofrom_user
+__copy_tofrom_user:
+	l.addi  r1,r1,-12
+	l.sw    0(r1),r6
+	l.sw    4(r1),r4
+	l.sw    8(r1),r3
+
+	l.addi  r11,r5,0
+2:  	l.sfeq  r11,r0
+	l.bf    1f
+	l.addi  r11,r11,-1
+8:    	l.lbz   r6,0(r4)
+9:    	l.sb    0(r3),r6
+	l.addi  r3,r3,1
+	l.j     2b
+	l.addi  r4,r4,1
+1:
+	l.addi  r11,r11,1               // r11 holds the return value
+
+	l.lwz   r6,0(r1)
+	l.lwz   r4,4(r1)
+	l.lwz   r3,8(r1)
+	l.jr    r9
+	l.addi  r1,r1,12
+
+	.section .fixup, "ax"
+99:
+		l.j     1b
+		l.nop
+	.previous
+
+	.section __ex_table, "a"
+		.long 8b, 99b		// read fault
+		.long 9b, 99b		// write fault
+	.previous
+
+/*
+ * unsigned long clear_user(void *addr, unsigned long size) ;
+ *
+ * NOTE: it returns number of bytes NOT cleared !!!
+ */
+	.global	__clear_user
+__clear_user:
+	l.addi  r1,r1,-8
+	l.sw    0(r1),r4
+	l.sw    4(r1),r3
+
+2:	l.sfeq	r4,r0
+	l.bf	1f
+	l.addi	r4,r4,-1
+9:	l.sb	0(r3),r0
+	l.j	2b
+	l.addi  r3,r3,1
+
+1:
+	l.addi  r11,r4,1
+
+	l.lwz	r4,0(r1)
+	l.lwz	r3,4(r1)
+	l.jr	r9
+	l.addi	r1,r1,8
+
+	.section .fixup, "ax"
+99:
+		l.j     1b
+		l.nop
+	.previous
+
+	.section __ex_table, "a"
+		.long 9b, 99b		// write fault
+	.previous
diff --git a/src/kernel/linux/v4.14/arch/openrisc/mm/Makefile b/src/kernel/linux/v4.14/arch/openrisc/mm/Makefile
new file mode 100644
index 0000000..324ba26
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/mm/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the linux openrisc-specific parts of the memory manager.
+#
+
+obj-y	:= fault.o tlb.o init.o ioremap.o
diff --git a/src/kernel/linux/v4.14/arch/openrisc/mm/fault.c b/src/kernel/linux/v4.14/arch/openrisc/mm/fault.c
new file mode 100644
index 0000000..e310ab4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/mm/fault.c
@@ -0,0 +1,362 @@
+/*
+ * OpenRISC fault.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/extable.h>
+#include <linux/sched/signal.h>
+
+#include <linux/uaccess.h>
+#include <asm/siginfo.h>
+#include <asm/signal.h>
+
+#define NUM_TLB_ENTRIES 64
+#define TLB_OFFSET(add) (((add) >> PAGE_SHIFT) & (NUM_TLB_ENTRIES-1))
+
+unsigned long pte_misses;	/* updated by do_page_fault() */
+unsigned long pte_errors;	/* updated by do_page_fault() */
+
+/* __PHX__ :: - check the vmalloc_fault in do_page_fault()
+ *            - also look into include/asm-or32/mmu_context.h
+ */
+volatile pgd_t *current_pgd;
+
+extern void die(char *, struct pt_regs *, long);
+
+/*
+ * This routine handles page faults.  It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ *
+ * If this routine detects a bad access, it returns 1, otherwise it
+ * returns 0.
+ */
+
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long address,
+			      unsigned long vector, int write_acc)
+{
+	struct task_struct *tsk;
+	struct mm_struct *mm;
+	struct vm_area_struct *vma;
+	siginfo_t info;
+	int fault;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
+
+	tsk = current;
+
+	/*
+	 * We fault-in kernel-space virtual memory on-demand. The
+	 * 'reference' page table is init_mm.pgd.
+	 *
+	 * NOTE! We MUST NOT take any locks for this case. We may
+	 * be in an interrupt or a critical region, and should
+	 * only copy the information from the master page table,
+	 * nothing more.
+	 *
+	 * NOTE2: This is done so that, when updating the vmalloc
+	 * mappings we don't have to walk all processes pgdirs and
+	 * add the high mappings all at once. Instead we do it as they
+	 * are used. However vmalloc'ed page entries have the PAGE_GLOBAL
+	 * bit set so sometimes the TLB can use a lingering entry.
+	 *
+	 * This verifies that the fault happens in kernel space
+	 * and that the fault was not a protection error.
+	 */
+
+	if (address >= VMALLOC_START &&
+	    (vector != 0x300 && vector != 0x400) &&
+	    !user_mode(regs))
+		goto vmalloc_fault;
+
+	/* If exceptions were enabled, we can reenable them here */
+	if (user_mode(regs)) {
+		/* Exception was in userspace: reenable interrupts */
+		local_irq_enable();
+		flags |= FAULT_FLAG_USER;
+	} else {
+		/* If exception was in a syscall, then IRQ's may have
+		 * been enabled or disabled.  If they were enabled,
+		 * reenable them.
+		 */
+		if (regs->sr && (SPR_SR_IEE | SPR_SR_TEE))
+			local_irq_enable();
+	}
+
+	mm = tsk->mm;
+	info.si_code = SEGV_MAPERR;
+
+	/*
+	 * If we're in an interrupt or have no user
+	 * context, we must not take the fault..
+	 */
+
+	if (in_interrupt() || !mm)
+		goto no_context;
+
+retry:
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, address);
+
+	if (!vma)
+		goto bad_area;
+
+	if (vma->vm_start <= address)
+		goto good_area;
+
+	if (!(vma->vm_flags & VM_GROWSDOWN))
+		goto bad_area;
+
+	if (user_mode(regs)) {
+		/*
+		 * accessing the stack below usp is always a bug.
+		 * we get page-aligned addresses so we can only check
+		 * if we're within a page from usp, but that might be
+		 * enough to catch brutal errors at least.
+		 */
+		if (address + PAGE_SIZE < regs->sp)
+			goto bad_area;
+	}
+	if (expand_stack(vma, address))
+		goto bad_area;
+
+	/*
+	 * Ok, we have a good vm_area for this memory access, so
+	 * we can handle it..
+	 */
+
+good_area:
+	info.si_code = SEGV_ACCERR;
+
+	/* first do some preliminary protection checks */
+
+	if (write_acc) {
+		if (!(vma->vm_flags & VM_WRITE))
+			goto bad_area;
+		flags |= FAULT_FLAG_WRITE;
+	} else {
+		/* not present */
+		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+			goto bad_area;
+	}
+
+	/* are we trying to execute nonexecutable area */
+	if ((vector == 0x400) && !(vma->vm_page_prot.pgprot & _PAGE_EXEC))
+		goto bad_area;
+
+	/*
+	 * If for any reason at all we couldn't handle the fault,
+	 * make sure we exit gracefully rather than endlessly redo
+	 * the fault.
+	 */
+
+	fault = handle_mm_fault(vma, address, flags);
+
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return;
+
+	if (unlikely(fault & VM_FAULT_ERROR)) {
+		if (fault & VM_FAULT_OOM)
+			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto bad_area;
+		else if (fault & VM_FAULT_SIGBUS)
+			goto do_sigbus;
+		BUG();
+	}
+
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+		/*RGD modeled on Cris */
+		if (fault & VM_FAULT_MAJOR)
+			tsk->maj_flt++;
+		else
+			tsk->min_flt++;
+		if (fault & VM_FAULT_RETRY) {
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+			flags |= FAULT_FLAG_TRIED;
+
+			 /* No need to up_read(&mm->mmap_sem) as we would
+			 * have already released it in __lock_page_or_retry
+			 * in mm/filemap.c.
+			 */
+
+			goto retry;
+		}
+	}
+
+	up_read(&mm->mmap_sem);
+	return;
+
+	/*
+	 * Something tried to access memory that isn't in our memory map..
+	 * Fix it, but check if it's kernel or user first..
+	 */
+
+bad_area:
+	up_read(&mm->mmap_sem);
+
+bad_area_nosemaphore:
+
+	/* User mode accesses just cause a SIGSEGV */
+
+	if (user_mode(regs)) {
+		info.si_signo = SIGSEGV;
+		info.si_errno = 0;
+		/* info.si_code has been set above */
+		info.si_addr = (void *)address;
+		force_sig_info(SIGSEGV, &info, tsk);
+		return;
+	}
+
+no_context:
+
+	/* Are we prepared to handle this kernel fault?
+	 *
+	 * (The kernel has valid exception-points in the source
+	 *  when it acesses user-memory. When it fails in one
+	 *  of those points, we find it in a table and do a jump
+	 *  to some fixup code that loads an appropriate error
+	 *  code)
+	 */
+
+	{
+		const struct exception_table_entry *entry;
+
+		__asm__ __volatile__("l.nop 42");
+
+		if ((entry = search_exception_tables(regs->pc)) != NULL) {
+			/* Adjust the instruction pointer in the stackframe */
+			regs->pc = entry->fixup;
+			return;
+		}
+	}
+
+	/*
+	 * Oops. The kernel tried to access some bad page. We'll have to
+	 * terminate things with extreme prejudice.
+	 */
+
+	if ((unsigned long)(address) < PAGE_SIZE)
+		printk(KERN_ALERT
+		       "Unable to handle kernel NULL pointer dereference");
+	else
+		printk(KERN_ALERT "Unable to handle kernel access");
+	printk(" at virtual address 0x%08lx\n", address);
+
+	die("Oops", regs, write_acc);
+
+	do_exit(SIGKILL);
+
+	/*
+	 * We ran out of memory, or some other thing happened to us that made
+	 * us unable to handle the page fault gracefully.
+	 */
+
+out_of_memory:
+	__asm__ __volatile__("l.nop 42");
+	__asm__ __volatile__("l.nop 1");
+
+	up_read(&mm->mmap_sem);
+	if (!user_mode(regs))
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
+
+do_sigbus:
+	up_read(&mm->mmap_sem);
+
+	/*
+	 * Send a sigbus, regardless of whether we were in kernel
+	 * or user mode.
+	 */
+	info.si_signo = SIGBUS;
+	info.si_errno = 0;
+	info.si_code = BUS_ADRERR;
+	info.si_addr = (void *)address;
+	force_sig_info(SIGBUS, &info, tsk);
+
+	/* Kernel mode? Handle exceptions or die */
+	if (!user_mode(regs))
+		goto no_context;
+	return;
+
+vmalloc_fault:
+	{
+		/*
+		 * Synchronize this task's top level page-table
+		 * with the 'reference' page table.
+		 *
+		 * Use current_pgd instead of tsk->active_mm->pgd
+		 * since the latter might be unavailable if this
+		 * code is executed in a misfortunately run irq
+		 * (like inside schedule() between switch_mm and
+		 *  switch_to...).
+		 */
+
+		int offset = pgd_index(address);
+		pgd_t *pgd, *pgd_k;
+		pud_t *pud, *pud_k;
+		pmd_t *pmd, *pmd_k;
+		pte_t *pte_k;
+
+/*
+		phx_warn("do_page_fault(): vmalloc_fault will not work, "
+			 "since current_pgd assign a proper value somewhere\n"
+			 "anyhow we don't need this at the moment\n");
+
+		phx_mmu("vmalloc_fault");
+*/
+		pgd = (pgd_t *)current_pgd + offset;
+		pgd_k = init_mm.pgd + offset;
+
+		/* Since we're two-level, we don't need to do both
+		 * set_pgd and set_pmd (they do the same thing). If
+		 * we go three-level at some point, do the right thing
+		 * with pgd_present and set_pgd here.
+		 *
+		 * Also, since the vmalloc area is global, we don't
+		 * need to copy individual PTE's, it is enough to
+		 * copy the pgd pointer into the pte page of the
+		 * root task. If that is there, we'll find our pte if
+		 * it exists.
+		 */
+
+		pud = pud_offset(pgd, address);
+		pud_k = pud_offset(pgd_k, address);
+		if (!pud_present(*pud_k))
+			goto no_context;
+
+		pmd = pmd_offset(pud, address);
+		pmd_k = pmd_offset(pud_k, address);
+
+		if (!pmd_present(*pmd_k))
+			goto bad_area_nosemaphore;
+
+		set_pmd(pmd, *pmd_k);
+
+		/* Make sure the actual PTE exists as well to
+		 * catch kernel vmalloc-area accesses to non-mapped
+		 * addresses. If we don't do this, this will just
+		 * silently loop forever.
+		 */
+
+		pte_k = pte_offset_kernel(pmd_k, address);
+		if (!pte_present(*pte_k))
+			goto no_context;
+
+		return;
+	}
+}
diff --git a/src/kernel/linux/v4.14/arch/openrisc/mm/init.c b/src/kernel/linux/v4.14/arch/openrisc/mm/init.c
new file mode 100644
index 0000000..f67d82b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/mm/init.c
@@ -0,0 +1,235 @@
+/*
+ * OpenRISC idle.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/blkdev.h>	/* for initrd_* */
+#include <linux/pagemap.h>
+#include <linux/memblock.h>
+
+#include <asm/segment.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/tlb.h>
+#include <asm/mmu_context.h>
+#include <asm/kmap_types.h>
+#include <asm/fixmap.h>
+#include <asm/tlbflush.h>
+#include <asm/sections.h>
+
+int mem_init_done;
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+static void __init zone_sizes_init(void)
+{
+	unsigned long zones_size[MAX_NR_ZONES];
+
+	/* Clear the zone sizes */
+	memset(zones_size, 0, sizeof(zones_size));
+
+	/*
+	 * We use only ZONE_NORMAL
+	 */
+	zones_size[ZONE_NORMAL] = max_low_pfn;
+
+	free_area_init(zones_size);
+}
+
+extern const char _s_kernel_ro[], _e_kernel_ro[];
+
+/*
+ * Map all physical memory into kernel's address space.
+ *
+ * This is explicitly coded for two-level page tables, so if you need
+ * something else then this needs to change.
+ */
+static void __init map_ram(void)
+{
+	unsigned long v, p, e;
+	pgprot_t prot;
+	pgd_t *pge;
+	pud_t *pue;
+	pmd_t *pme;
+	pte_t *pte;
+	/* These mark extents of read-only kernel pages...
+	 * ...from vmlinux.lds.S
+	 */
+	struct memblock_region *region;
+
+	v = PAGE_OFFSET;
+
+	for_each_memblock(memory, region) {
+		p = (u32) region->base & PAGE_MASK;
+		e = p + (u32) region->size;
+
+		v = (u32) __va(p);
+		pge = pgd_offset_k(v);
+
+		while (p < e) {
+			int j;
+			pue = pud_offset(pge, v);
+			pme = pmd_offset(pue, v);
+
+			if ((u32) pue != (u32) pge || (u32) pme != (u32) pge) {
+				panic("%s: OR1K kernel hardcoded for "
+				      "two-level page tables",
+				     __func__);
+			}
+
+			/* Alloc one page for holding PTE's... */
+			pte = (pte_t *) __va(memblock_alloc(PAGE_SIZE, PAGE_SIZE));
+			set_pmd(pme, __pmd(_KERNPG_TABLE + __pa(pte)));
+
+			/* Fill the newly allocated page with PTE'S */
+			for (j = 0; p < e && j < PTRS_PER_PTE;
+			     v += PAGE_SIZE, p += PAGE_SIZE, j++, pte++) {
+				if (v >= (u32) _e_kernel_ro ||
+				    v < (u32) _s_kernel_ro)
+					prot = PAGE_KERNEL;
+				else
+					prot = PAGE_KERNEL_RO;
+
+				set_pte(pte, mk_pte_phys(p, prot));
+			}
+
+			pge++;
+		}
+
+		printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
+		       region->base, region->base + region->size);
+	}
+}
+
+void __init paging_init(void)
+{
+	extern void tlb_init(void);
+
+	unsigned long end;
+	int i;
+
+	printk(KERN_INFO "Setting up paging and PTEs.\n");
+
+	/* clear out the init_mm.pgd that will contain the kernel's mappings */
+
+	for (i = 0; i < PTRS_PER_PGD; i++)
+		swapper_pg_dir[i] = __pgd(0);
+
+	/* make sure the current pgd table points to something sane
+	 * (even if it is most probably not used until the next
+	 *  switch_mm)
+	 */
+	current_pgd = init_mm.pgd;
+
+	end = (unsigned long)__va(max_low_pfn * PAGE_SIZE);
+
+	map_ram();
+
+	zone_sizes_init();
+
+	/* self modifying code ;) */
+	/* Since the old TLB miss handler has been running up until now,
+	 * the kernel pages are still all RW, so we can still modify the
+	 * text directly... after this change and a TLB flush, the kernel
+	 * pages will become RO.
+	 */
+	{
+		extern unsigned long dtlb_miss_handler;
+		extern unsigned long itlb_miss_handler;
+
+		unsigned long *dtlb_vector = __va(0x900);
+		unsigned long *itlb_vector = __va(0xa00);
+
+		printk(KERN_INFO "itlb_miss_handler %p\n", &itlb_miss_handler);
+		*itlb_vector = ((unsigned long)&itlb_miss_handler -
+				(unsigned long)itlb_vector) >> 2;
+
+		/* Soft ordering constraint to ensure that dtlb_vector is
+		 * the last thing updated
+		 */
+		barrier();
+
+		printk(KERN_INFO "dtlb_miss_handler %p\n", &dtlb_miss_handler);
+		*dtlb_vector = ((unsigned long)&dtlb_miss_handler -
+				(unsigned long)dtlb_vector) >> 2;
+
+	}
+
+	/* Soft ordering constraint to ensure that cache invalidation and
+	 * TLB flush really happen _after_ code has been modified.
+	 */
+	barrier();
+
+	/* Invalidate instruction caches after code modification */
+	mtspr(SPR_ICBIR, 0x900);
+	mtspr(SPR_ICBIR, 0xa00);
+
+	/* New TLB miss handlers and kernel page tables are in now place.
+	 * Make sure that page flags get updated for all pages in TLB by
+	 * flushing the TLB and forcing all TLB entries to be recreated
+	 * from their page table flags.
+	 */
+	flush_tlb_all();
+}
+
+/* References to section boundaries */
+
+void __init mem_init(void)
+{
+	BUG_ON(!mem_map);
+
+	max_mapnr = max_low_pfn;
+	high_memory = (void *)__va(max_low_pfn * PAGE_SIZE);
+
+	/* clear the zero-page */
+	memset((void *)empty_zero_page, 0, PAGE_SIZE);
+
+	/* this will put all low memory onto the freelists */
+	free_all_bootmem();
+
+	mem_init_print_info(NULL);
+
+	printk("mem_init_done ...........................................\n");
+	mem_init_done = 1;
+	return;
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+	free_reserved_area((void *)start, (void *)end, -1, "initrd");
+}
+#endif
+
+void free_initmem(void)
+{
+	free_initmem_default(-1);
+}
diff --git a/src/kernel/linux/v4.14/arch/openrisc/mm/ioremap.c b/src/kernel/linux/v4.14/arch/openrisc/mm/ioremap.c
new file mode 100644
index 0000000..2175e4b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/mm/ioremap.c
@@ -0,0 +1,135 @@
+/*
+ * OpenRISC ioremap.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/vmalloc.h>
+#include <linux/io.h>
+#include <asm/pgalloc.h>
+#include <asm/kmap_types.h>
+#include <asm/fixmap.h>
+#include <asm/bug.h>
+#include <asm/pgtable.h>
+#include <linux/sched.h>
+#include <asm/tlbflush.h>
+
+extern int mem_init_done;
+
+static unsigned int fixmaps_used __initdata;
+
+/*
+ * Remap an arbitrary physical address space into the kernel virtual
+ * address space. Needed when the kernel wants to access high addresses
+ * directly.
+ *
+ * NOTE! We need to allow non-page-aligned mappings too: we will obviously
+ * have to convert them into an offset in a page-aligned mapping, but the
+ * caller shouldn't need to know that small detail.
+ */
+void __iomem *__ref
+__ioremap(phys_addr_t addr, unsigned long size, pgprot_t prot)
+{
+	phys_addr_t p;
+	unsigned long v;
+	unsigned long offset, last_addr;
+	struct vm_struct *area = NULL;
+
+	/* Don't allow wraparound or zero size */
+	last_addr = addr + size - 1;
+	if (!size || last_addr < addr)
+		return NULL;
+
+	/*
+	 * Mappings have to be page-aligned
+	 */
+	offset = addr & ~PAGE_MASK;
+	p = addr & PAGE_MASK;
+	size = PAGE_ALIGN(last_addr + 1) - p;
+
+	if (likely(mem_init_done)) {
+		area = get_vm_area(size, VM_IOREMAP);
+		if (!area)
+			return NULL;
+		v = (unsigned long)area->addr;
+	} else {
+		if ((fixmaps_used + (size >> PAGE_SHIFT)) > FIX_N_IOREMAPS)
+			return NULL;
+		v = fix_to_virt(FIX_IOREMAP_BEGIN + fixmaps_used);
+		fixmaps_used += (size >> PAGE_SHIFT);
+	}
+
+	if (ioremap_page_range(v, v + size, p, prot)) {
+		if (likely(mem_init_done))
+			vfree(area->addr);
+		else
+			fixmaps_used -= (size >> PAGE_SHIFT);
+		return NULL;
+	}
+
+	return (void __iomem *)(offset + (char *)v);
+}
+EXPORT_SYMBOL(__ioremap);
+
+void iounmap(void *addr)
+{
+	/* If the page is from the fixmap pool then we just clear out
+	 * the fixmap mapping.
+	 */
+	if (unlikely((unsigned long)addr > FIXADDR_START)) {
+		/* This is a bit broken... we don't really know
+		 * how big the area is so it's difficult to know
+		 * how many fixed pages to invalidate...
+		 * just flush tlb and hope for the best...
+		 * consider this a FIXME
+		 *
+		 * Really we should be clearing out one or more page
+		 * table entries for these virtual addresses so that
+		 * future references cause a page fault... for now, we
+		 * rely on two things:
+		 *   i)  this code never gets called on known boards
+		 *   ii) invalid accesses to the freed areas aren't made
+		 */
+		flush_tlb_all();
+		return;
+	}
+
+	return vfree((void *)(PAGE_MASK & (unsigned long)addr));
+}
+EXPORT_SYMBOL(iounmap);
+
+/**
+ * OK, this one's a bit tricky... ioremap can get called before memory is
+ * initialized (early serial console does this) and will want to alloc a page
+ * for its mapping.  No userspace pages will ever get allocated before memory
+ * is initialized so this applies only to kernel pages.  In the event that
+ * this is called before memory is initialized we allocate the page using
+ * the memblock infrastructure.
+ */
+
+pte_t __ref *pte_alloc_one_kernel(struct mm_struct *mm,
+					 unsigned long address)
+{
+	pte_t *pte;
+
+	if (likely(mem_init_done)) {
+		pte = (pte_t *) __get_free_page(GFP_KERNEL);
+	} else {
+		pte = (pte_t *) __va(memblock_alloc(PAGE_SIZE, PAGE_SIZE));
+	}
+
+	if (pte)
+		clear_page(pte);
+	return pte;
+}
diff --git a/src/kernel/linux/v4.14/arch/openrisc/mm/tlb.c b/src/kernel/linux/v4.14/arch/openrisc/mm/tlb.c
new file mode 100644
index 0000000..683bd4d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/openrisc/mm/tlb.c
@@ -0,0 +1,192 @@
+/*
+ * OpenRISC tlb.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Julius Baxter <julius.baxter@orsoc.se>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/segment.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+#include <asm/mmu_context.h>
+#include <asm/spr_defs.h>
+
+#define NO_CONTEXT -1
+
+#define NUM_DTLB_SETS (1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> \
+			    SPR_DMMUCFGR_NTS_OFF))
+#define NUM_ITLB_SETS (1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> \
+			    SPR_IMMUCFGR_NTS_OFF))
+#define DTLB_OFFSET(addr) (((addr) >> PAGE_SHIFT) & (NUM_DTLB_SETS-1))
+#define ITLB_OFFSET(addr) (((addr) >> PAGE_SHIFT) & (NUM_ITLB_SETS-1))
+/*
+ * Invalidate all TLB entries.
+ *
+ * This comes down to setting the 'valid' bit for all xTLBMR registers to 0.
+ * Easiest way to accomplish this is to just zero out the xTLBMR register
+ * completely.
+ *
+ */
+
+void flush_tlb_all(void)
+{
+	int i;
+	unsigned long num_tlb_sets;
+
+	/* Determine number of sets for IMMU. */
+	/* FIXME: Assumption is I & D nsets equal. */
+	num_tlb_sets = NUM_ITLB_SETS;
+
+	for (i = 0; i < num_tlb_sets; i++) {
+		mtspr_off(SPR_DTLBMR_BASE(0), i, 0);
+		mtspr_off(SPR_ITLBMR_BASE(0), i, 0);
+	}
+}
+
+#define have_dtlbeir (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_TEIRI)
+#define have_itlbeir (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_TEIRI)
+
+/*
+ * Invalidate a single page.  This is what the xTLBEIR register is for.
+ *
+ * There's no point in checking the vma for PAGE_EXEC to determine whether it's
+ * the data or instruction TLB that should be flushed... that would take more
+ * than the few instructions that the following compiles down to!
+ *
+ * The case where we don't have the xTLBEIR register really only works for
+ * MMU's with a single way and is hard-coded that way.
+ */
+
+#define flush_dtlb_page_eir(addr) mtspr(SPR_DTLBEIR, addr)
+#define flush_dtlb_page_no_eir(addr) \
+	mtspr_off(SPR_DTLBMR_BASE(0), DTLB_OFFSET(addr), 0);
+
+#define flush_itlb_page_eir(addr) mtspr(SPR_ITLBEIR, addr)
+#define flush_itlb_page_no_eir(addr) \
+	mtspr_off(SPR_ITLBMR_BASE(0), ITLB_OFFSET(addr), 0);
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	if (have_dtlbeir)
+		flush_dtlb_page_eir(addr);
+	else
+		flush_dtlb_page_no_eir(addr);
+
+	if (have_itlbeir)
+		flush_itlb_page_eir(addr);
+	else
+		flush_itlb_page_no_eir(addr);
+}
+
+void flush_tlb_range(struct vm_area_struct *vma,
+		     unsigned long start, unsigned long end)
+{
+	int addr;
+	bool dtlbeir;
+	bool itlbeir;
+
+	dtlbeir = have_dtlbeir;
+	itlbeir = have_itlbeir;
+
+	for (addr = start; addr < end; addr += PAGE_SIZE) {
+		if (dtlbeir)
+			flush_dtlb_page_eir(addr);
+		else
+			flush_dtlb_page_no_eir(addr);
+
+		if (itlbeir)
+			flush_itlb_page_eir(addr);
+		else
+			flush_itlb_page_no_eir(addr);
+	}
+}
+
+/*
+ * Invalidate the selected mm context only.
+ *
+ * FIXME: Due to some bug here, we're flushing everything for now.
+ * This should be changed to loop over over mm and call flush_tlb_range.
+ */
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+
+	/* Was seeing bugs with the mm struct passed to us. Scrapped most of
+	   this function. */
+	/* Several architctures do this */
+	flush_tlb_all();
+}
+
+/* called in schedule() just before actually doing the switch_to */
+
+void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+	       struct task_struct *next_tsk)
+{
+	/* remember the pgd for the fault handlers
+	 * this is similar to the pgd register in some other CPU's.
+	 * we need our own copy of it because current and active_mm
+	 * might be invalid at points where we still need to derefer
+	 * the pgd.
+	 */
+	current_pgd = next->pgd;
+
+	/* We don't have context support implemented, so flush all
+	 * entries belonging to previous map
+	 */
+
+	if (prev != next)
+		flush_tlb_mm(prev);
+
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+
+int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	mm->context = NO_CONTEXT;
+	return 0;
+}
+
+/* called by __exit_mm to destroy the used MMU context if any before
+ * destroying the mm itself. this is only called when the last user of the mm
+ * drops it.
+ */
+
+void destroy_context(struct mm_struct *mm)
+{
+	flush_tlb_mm(mm);
+
+}
+
+/* called once during VM initialization, from init.c */
+
+void __init tlb_init(void)
+{
+	/* Do nothing... */
+	/* invalidate the entire TLB */
+	/* flush_tlb_all(); */
+}