[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/arch/parisc/Makefile b/src/kernel/linux/v4.14/arch/parisc/Makefile
new file mode 100644
index 0000000..01946eb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/parisc/Makefile
@@ -0,0 +1,168 @@
+#
+# parisc/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies. Remember to do have actions
+# for "archclean" and "archdep" for cleaning up and making dependencies for
+# this architecture
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1994 by Linus Torvalds
+# Portions Copyright (C) 1999 The Puffin Group
+#
+# Modified for PA-RISC Linux by Paul Lahaie, Alex deVries,
+# Mike Shaver, Helge Deller and Martin K. Petersen
+#
+
+KBUILD_IMAGE := vmlinuz
+
+KBUILD_DEFCONFIG := default_defconfig
+
+NM = sh $(srctree)/arch/parisc/nm
+CHECKFLAGS += -D__hppa__=1
+LIBGCC = $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+export LIBGCC
+
+ifdef CONFIG_64BIT
+UTS_MACHINE := parisc64
+CHECKFLAGS += -D__LP64__=1 -m64
+CC_ARCHES = hppa64
+LD_BFD := elf64-hppa-linux
+else # 32-bit
+CC_ARCHES = hppa hppa2.0 hppa1.1
+LD_BFD := elf32-hppa-linux
+endif
+
+export LD_BFD
+
+ifneq ($(SUBARCH),$(UTS_MACHINE))
+ ifeq ($(CROSS_COMPILE),)
+ CC_SUFFIXES = linux linux-gnu unknown-linux-gnu
+ CROSS_COMPILE := $(call cc-cross-prefix, \
+ $(foreach a,$(CC_ARCHES), \
+ $(foreach s,$(CC_SUFFIXES),$(a)-$(s)-)))
+ endif
+endif
+
+OBJCOPY_FLAGS =-O binary -R .note -R .comment -S
+
+cflags-y := -pipe
+
+# These flags should be implied by an hppa-linux configuration, but they
+# are not in gcc 3.2.
+cflags-y += -mno-space-regs
+
+# -mfast-indirect-calls is only relevant for 32-bit kernels.
+ifndef CONFIG_64BIT
+cflags-y += -mfast-indirect-calls
+endif
+
+# Currently we save and restore fpregs on all kernel entry/interruption paths.
+# If that gets optimized, we might need to disable the use of fpregs in the
+# kernel.
+cflags-y += -mdisable-fpregs
+
+# Without this, "ld -r" results in .text sections that are too big
+# (> 0x40000) for branches to reach stubs.
+cflags-y += -ffunction-sections
+
+# Use long jumps instead of long branches (needed if your linker fails to
+# link a too big vmlinux executable). Not enabled for building modules.
+ifdef CONFIG_MLONGCALLS
+KBUILD_CFLAGS_KERNEL += -mlong-calls
+endif
+
+# select which processor to optimise for
+cflags-$(CONFIG_PA7000) += -march=1.1 -mschedule=7100
+cflags-$(CONFIG_PA7200) += -march=1.1 -mschedule=7200
+cflags-$(CONFIG_PA7100LC) += -march=1.1 -mschedule=7100LC
+cflags-$(CONFIG_PA7300LC) += -march=1.1 -mschedule=7300
+cflags-$(CONFIG_PA8X00) += -march=2.0 -mschedule=8000
+
+head-y := arch/parisc/kernel/head.o
+
+KBUILD_CFLAGS += $(cflags-y)
+
+kernel-y := mm/ kernel/ math-emu/
+
+core-y += $(addprefix arch/parisc/, $(kernel-y))
+libs-y += arch/parisc/lib/ $(LIBGCC)
+
+drivers-$(CONFIG_OPROFILE) += arch/parisc/oprofile/
+
+boot := arch/parisc/boot
+
+PALO := $(shell if (which palo 2>&1); then : ; \
+ elif [ -x /sbin/palo ]; then echo /sbin/palo; \
+ fi)
+
+PALOCONF := $(shell if [ -f $(src)/palo.conf ]; then echo $(src)/palo.conf; \
+ else echo $(obj)/palo.conf; \
+ fi)
+
+palo lifimage: vmlinuz
+ @if test ! -x "$(PALO)"; then \
+ echo 'ERROR: Please install palo first (apt-get install palo)';\
+ echo 'or build it from source and install it somewhere in your $$PATH';\
+ false; \
+ fi
+ @if test ! -f "$(PALOCONF)"; then \
+ cp $(src)/arch/parisc/defpalo.conf $(obj)/palo.conf; \
+ echo 'A generic palo config file ($(obj)/palo.conf) has been created for you.'; \
+ echo 'You should check it and re-run "make palo".'; \
+ echo 'WARNING: the "lifimage" file is now placed in this directory by default!'; \
+ false; \
+ fi
+ $(PALO) -f $(PALOCONF)
+
+BOOT_TARGETS = zImage Image palo lifimage
+INSTALL_TARGETS = zinstall install
+
+PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS)
+
+zImage: vmlinuz
+Image: vmlinux
+
+bzImage: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+ifdef CONFIG_PARISC_SELF_EXTRACT
+vmlinuz: bzImage
+ $(OBJCOPY) $(boot)/bzImage $@
+else
+vmlinuz: vmlinux
+ @gzip -cf -9 $< > $@
+endif
+
+install:
+ $(CONFIG_SHELL) $(src)/arch/parisc/install.sh \
+ $(KERNELRELEASE) vmlinux System.map "$(INSTALL_PATH)"
+zinstall:
+ $(CONFIG_SHELL) $(src)/arch/parisc/install.sh \
+ $(KERNELRELEASE) vmlinuz System.map "$(INSTALL_PATH)"
+
+CLEAN_FILES += lifimage
+MRPROPER_FILES += palo.conf
+
+define archhelp
+ @echo '* vmlinux - Uncompressed kernel image (./vmlinux)'
+ @echo ' vmlinuz - Compressed kernel image (./vmlinuz)'
+ @echo ' palo - Bootable image (./lifimage)'
+ @echo ' install - Install uncompressed vmlinux kernel using'
+ @echo ' (your) ~/bin/$(INSTALLKERNEL) or'
+ @echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
+ @echo ' copy to $$(INSTALL_PATH)'
+ @echo ' zinstall - Install compressed vmlinuz kernel'
+endef
+
+# we require gcc 3.3 or above to compile the kernel
+archprepare: checkbin
+checkbin:
+ @if test "$(cc-version)" -lt "0303"; then \
+ echo -n "Sorry, GCC v3.3 or above is required to build " ; \
+ echo "the kernel." ; \
+ false ; \
+ fi