diff --git a/src/kernel/linux/v4.14/arch/sh/Kconfig b/src/kernel/linux/v4.14/arch/sh/Kconfig
new file mode 100644
index 0000000..97fe293
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/Kconfig
@@ -0,0 +1,913 @@
+# SPDX-License-Identifier: GPL-2.0
+config SUPERH
+	def_bool y
+	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
+	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_NO_COHERENT_DMA_MMAP if !MMU
+	select HAVE_PATA_PLATFORM
+	select CLKDEV_LOOKUP
+	select HAVE_IDE if HAS_IOPORT_MAP
+	select HAVE_MEMBLOCK
+	select HAVE_MEMBLOCK_NODE_MAP
+	select ARCH_DISCARD_MEMBLOCK
+	select HAVE_OPROFILE
+	select HAVE_GENERIC_DMA_COHERENT
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_DMA_API_DEBUG
+	select HAVE_PERF_EVENTS
+	select HAVE_DEBUG_BUGVERBOSE
+	select ARCH_HAVE_CUSTOM_GPIO_H
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
+	select ARCH_HAS_GCOV_PROFILE_ALL
+	select PERF_USE_VMALLOC
+	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_KERNEL_GZIP
+	select CPU_NO_EFFICIENT_FFS
+	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_LZMA
+	select HAVE_KERNEL_XZ
+	select HAVE_KERNEL_LZO
+	select HAVE_UID16
+	select ARCH_WANT_IPC_PARSE_VERSION
+	select HAVE_SYSCALL_TRACEPOINTS
+	select HAVE_REGS_AND_STACK_ACCESS_API
+	select MAY_HAVE_SPARSE_IRQ
+	select IRQ_FORCED_THREADING
+	select RTC_LIB
+	select GENERIC_ATOMIC64
+	select GENERIC_IRQ_SHOW
+	select GENERIC_SMP_IDLE_THREAD
+	select GENERIC_IDLE_POLL_SETUP
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
+	select GENERIC_SCHED_CLOCK
+	select GENERIC_STRNCPY_FROM_USER
+	select GENERIC_STRNLEN_USER
+	select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER
+	select MODULES_USE_ELF_RELA
+	select OLD_SIGSUSPEND
+	select OLD_SIGACTION
+	select HAVE_ARCH_AUDITSYSCALL
+	select HAVE_FUTEX_CMPXCHG if FUTEX
+	select HAVE_NMI
+	help
+	  The SuperH is a RISC processor targeted for use in embedded systems
+	  and consumer electronics; it was also used in the Sega Dreamcast
+	  gaming console.  The SuperH port has a home page at
+	  <http://www.linux-sh.org/>.
+
+config SUPERH32
+	def_bool ARCH = "sh"
+	select HAVE_KPROBES
+	select HAVE_KRETPROBES
+	select HAVE_IOREMAP_PROT if MMU && !X2TLB
+	select HAVE_FUNCTION_TRACER
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
+	select ARCH_WANT_IPC_PARSE_VERSION
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_ARCH_KGDB
+	select HAVE_HW_BREAKPOINT
+	select HAVE_MIXED_BREAKPOINTS_REGS
+	select PERF_EVENTS
+	select ARCH_HIBERNATION_POSSIBLE if MMU
+	select SPARSE_IRQ
+	select HAVE_CC_STACKPROTECTOR
+
+config SUPERH64
+	def_bool ARCH = "sh64"
+	select HAVE_EXIT_THREAD
+	select KALLSYMS
+
+config ARCH_DEFCONFIG
+	string
+	default "arch/sh/configs/shx3_defconfig" if SUPERH32
+	default "arch/sh/configs/cayman_defconfig" if SUPERH64
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool y
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+
+config GENERIC_BUG
+	def_bool y
+	depends on BUG && SUPERH32
+
+config GENERIC_CSUM
+	def_bool y
+	depends on SUPERH64
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+
+config GENERIC_LOCKBREAK
+	def_bool y
+	depends on SMP && PREEMPT
+
+config ARCH_SUSPEND_POSSIBLE
+	def_bool n
+
+config ARCH_HIBERNATION_POSSIBLE
+	def_bool n
+
+config SYS_SUPPORTS_APM_EMULATION
+	bool
+	select ARCH_SUSPEND_POSSIBLE
+
+config SYS_SUPPORTS_HUGETLBFS
+	bool
+
+config SYS_SUPPORTS_SMP
+	bool
+
+config SYS_SUPPORTS_NUMA
+	bool
+
+config SYS_SUPPORTS_PCI
+	bool
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config ARCH_HAS_ILOG2_U32
+	def_bool n
+
+config ARCH_HAS_ILOG2_U64
+	def_bool n
+
+config NO_IOPORT_MAP
+	def_bool !PCI
+	depends on !SH_CAYMAN && !SH_SH4202_MICRODEV && !SH_SHMIN && \
+		   !SH_HP6XX && !SH_SOLUTION_ENGINE
+
+config IO_TRAPPED
+	bool
+
+config SWAP_IO_SPACE
+	bool
+
+config DMA_COHERENT
+	bool
+
+config DMA_NONCOHERENT
+	def_bool !DMA_COHERENT
+
+config NEED_DMA_MAP_STATE
+	def_bool DMA_NONCOHERENT
+
+config NEED_SG_DMA_LENGTH
+	def_bool y
+
+config PGTABLE_LEVELS
+	default 3 if X2TLB
+	default 2
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+menu "System type"
+
+#
+# Processor families
+#
+config CPU_SH2
+	bool
+	select SH_INTC
+
+config CPU_SH2A
+	bool
+	select CPU_SH2
+	select UNCACHED_MAPPING
+
+config CPU_J2
+	bool
+	select CPU_SH2
+	select OF
+	select OF_EARLY_FLATTREE
+
+config CPU_SH3
+	bool
+	select CPU_HAS_INTEVT
+	select CPU_HAS_SR_RB
+	select SH_INTC
+	select SYS_SUPPORTS_SH_TMU
+
+config CPU_SH4
+	bool
+	select CPU_HAS_INTEVT
+	select CPU_HAS_SR_RB
+	select CPU_HAS_FPU if !CPU_SH4AL_DSP
+	select SH_INTC
+	select SYS_SUPPORTS_SH_TMU
+	select SYS_SUPPORTS_HUGETLBFS if MMU
+
+config CPU_SH4A
+	bool
+	select CPU_SH4
+
+config CPU_SH4AL_DSP
+	bool
+	select CPU_SH4A
+	select CPU_HAS_DSP
+
+config CPU_SH5
+	bool
+	select CPU_HAS_FPU
+	select SYS_SUPPORTS_SH_TMU
+	select SYS_SUPPORTS_HUGETLBFS if MMU
+
+config CPU_SHX2
+	bool
+
+config CPU_SHX3
+	bool
+	select DMA_COHERENT
+	select SYS_SUPPORTS_SMP
+	select SYS_SUPPORTS_NUMA
+
+config ARCH_SHMOBILE
+	bool
+	select ARCH_SUSPEND_POSSIBLE
+	select PM
+
+config CPU_HAS_PMU
+       depends on CPU_SH4 || CPU_SH4A
+       default y
+       bool
+
+if SUPERH32
+
+choice
+	prompt "Processor sub-type selection"
+
+#
+# Processor subtypes
+#
+
+# SH-2 Processor Support
+
+config CPU_SUBTYPE_SH7619
+	bool "Support SH7619 processor"
+	select CPU_SH2
+	select SYS_SUPPORTS_SH_CMT
+
+config CPU_SUBTYPE_J2
+	bool "Support J2 processor"
+	select CPU_J2
+	select SYS_SUPPORTS_SMP
+	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+
+# SH-2A Processor Support
+
+config CPU_SUBTYPE_SH7201
+	bool "Support SH7201 processor"
+	select CPU_SH2A
+	select CPU_HAS_FPU
+	select SYS_SUPPORTS_SH_MTU2
+ 
+config CPU_SUBTYPE_SH7203
+	bool "Support SH7203 processor"
+	select CPU_SH2A
+	select CPU_HAS_FPU
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_MTU2
+	select PINCTRL
+
+config CPU_SUBTYPE_SH7206
+	bool "Support SH7206 processor"
+	select CPU_SH2A
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_MTU2
+
+config CPU_SUBTYPE_SH7263
+	bool "Support SH7263 processor"
+	select CPU_SH2A
+	select CPU_HAS_FPU
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_MTU2
+
+config CPU_SUBTYPE_SH7264
+	bool "Support SH7264 processor"
+	select CPU_SH2A
+	select CPU_HAS_FPU
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_MTU2
+	select PINCTRL
+
+config CPU_SUBTYPE_SH7269
+	bool "Support SH7269 processor"
+	select CPU_SH2A
+	select CPU_HAS_FPU
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_MTU2
+	select PINCTRL
+
+config CPU_SUBTYPE_MXG
+	bool "Support MX-G processor"
+	select CPU_SH2A
+	select SYS_SUPPORTS_SH_MTU2
+	help
+	  Select MX-G if running on an R8A03022BG part.
+
+# SH-3 Processor Support
+
+config CPU_SUBTYPE_SH7705
+	bool "Support SH7705 processor"
+	select CPU_SH3
+
+config CPU_SUBTYPE_SH7706
+	bool "Support SH7706 processor"
+	select CPU_SH3
+	help
+	  Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.
+
+config CPU_SUBTYPE_SH7707
+	bool "Support SH7707 processor"
+	select CPU_SH3
+	help
+	  Select SH7707 if you have a  60 Mhz SH-3 HD6417707 CPU.
+
+config CPU_SUBTYPE_SH7708
+	bool "Support SH7708 processor"
+	select CPU_SH3
+	help
+	  Select SH7708 if you have a  60 Mhz SH-3 HD6417708S or
+	  if you have a 100 Mhz SH-3 HD6417708R CPU.
+
+config CPU_SUBTYPE_SH7709
+	bool "Support SH7709 processor"
+	select CPU_SH3
+	help
+	  Select SH7709 if you have a  80 Mhz SH-3 HD6417709 CPU.
+
+config CPU_SUBTYPE_SH7710
+	bool "Support SH7710 processor"
+	select CPU_SH3
+	select CPU_HAS_DSP
+	help
+	  Select SH7710 if you have a SH3-DSP SH7710 CPU.
+
+config CPU_SUBTYPE_SH7712
+	bool "Support SH7712 processor"
+	select CPU_SH3
+	select CPU_HAS_DSP
+	help
+	  Select SH7712 if you have a SH3-DSP SH7712 CPU.
+
+config CPU_SUBTYPE_SH7720
+	bool "Support SH7720 processor"
+	select CPU_SH3
+	select CPU_HAS_DSP
+	select SYS_SUPPORTS_SH_CMT
+	select USB_OHCI_SH if USB_OHCI_HCD
+	select PINCTRL
+	help
+	  Select SH7720 if you have a SH3-DSP SH7720 CPU.
+
+config CPU_SUBTYPE_SH7721
+	bool "Support SH7721 processor"
+	select CPU_SH3
+	select CPU_HAS_DSP
+	select SYS_SUPPORTS_SH_CMT
+	select USB_OHCI_SH if USB_OHCI_HCD
+	help
+	  Select SH7721 if you have a SH3-DSP SH7721 CPU.
+
+# SH-4 Processor Support
+
+config CPU_SUBTYPE_SH7750
+	bool "Support SH7750 processor"
+	select CPU_SH4
+	help
+	  Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
+
+config CPU_SUBTYPE_SH7091
+	bool "Support SH7091 processor"
+	select CPU_SH4
+	help
+	  Select SH7091 if you have an SH-4 based Sega device (such as
+	  the Dreamcast, Naomi, and Naomi 2).
+
+config CPU_SUBTYPE_SH7750R
+	bool "Support SH7750R processor"
+	select CPU_SH4
+
+config CPU_SUBTYPE_SH7750S
+	bool "Support SH7750S processor"
+	select CPU_SH4
+
+config CPU_SUBTYPE_SH7751
+	bool "Support SH7751 processor"
+	select CPU_SH4
+	help
+	  Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
+	  or if you have a HD6417751R CPU.
+
+config CPU_SUBTYPE_SH7751R
+	bool "Support SH7751R processor"
+	select CPU_SH4
+
+config CPU_SUBTYPE_SH7760
+	bool "Support SH7760 processor"
+	select CPU_SH4
+
+config CPU_SUBTYPE_SH4_202
+	bool "Support SH4-202 processor"
+	select CPU_SH4
+
+# SH-4A Processor Support
+
+config CPU_SUBTYPE_SH7723
+	bool "Support SH7723 processor"
+	select CPU_SH4A
+	select CPU_SHX2
+	select ARCH_SHMOBILE
+	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_SH_CMT
+	select PINCTRL
+	help
+	  Select SH7723 if you have an SH-MobileR2 CPU.
+
+config CPU_SUBTYPE_SH7724
+	bool "Support SH7724 processor"
+	select CPU_SH4A
+	select CPU_SHX2
+	select ARCH_SHMOBILE
+	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_SH_CMT
+	select PINCTRL
+	help
+	  Select SH7724 if you have an SH-MobileR2R CPU.
+
+config CPU_SUBTYPE_SH7734
+	bool "Support SH7734 processor"
+	select CPU_SH4A
+	select CPU_SHX2
+	select PINCTRL
+	help
+	  Select SH7734 if you have a SH4A SH7734 CPU.
+
+config CPU_SUBTYPE_SH7757
+	bool "Support SH7757 processor"
+	select CPU_SH4A
+	select CPU_SHX2
+	select PINCTRL
+	help
+	  Select SH7757 if you have a SH4A SH7757 CPU.
+
+config CPU_SUBTYPE_SH7763
+	bool "Support SH7763 processor"
+	select CPU_SH4A
+	select USB_OHCI_SH if USB_OHCI_HCD
+	help
+	  Select SH7763 if you have a SH4A SH7763(R5S77631) CPU.
+
+config CPU_SUBTYPE_SH7770
+	bool "Support SH7770 processor"
+	select CPU_SH4A
+
+config CPU_SUBTYPE_SH7780
+	bool "Support SH7780 processor"
+	select CPU_SH4A
+
+config CPU_SUBTYPE_SH7785
+	bool "Support SH7785 processor"
+	select CPU_SH4A
+	select CPU_SHX2
+	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_NUMA
+	select PINCTRL
+
+config CPU_SUBTYPE_SH7786
+	bool "Support SH7786 processor"
+	select CPU_SH4A
+	select CPU_SHX3
+	select CPU_HAS_PTEAEX
+	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select USB_OHCI_SH if USB_OHCI_HCD
+	select USB_EHCI_SH if USB_EHCI_HCD
+	select PINCTRL
+
+config CPU_SUBTYPE_SHX3
+	bool "Support SH-X3 processor"
+	select CPU_SH4A
+	select CPU_SHX3
+	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select GPIOLIB
+	select PINCTRL
+
+# SH4AL-DSP Processor Support
+
+config CPU_SUBTYPE_SH7343
+	bool "Support SH7343 processor"
+	select CPU_SH4AL_DSP
+	select ARCH_SHMOBILE
+	select SYS_SUPPORTS_SH_CMT
+
+config CPU_SUBTYPE_SH7722
+	bool "Support SH7722 processor"
+	select CPU_SH4AL_DSP
+	select CPU_SHX2
+	select ARCH_SHMOBILE
+	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_NUMA
+	select SYS_SUPPORTS_SH_CMT
+	select PINCTRL
+
+config CPU_SUBTYPE_SH7366
+	bool "Support SH7366 processor"
+	select CPU_SH4AL_DSP
+	select CPU_SHX2
+	select ARCH_SHMOBILE
+	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_NUMA
+	select SYS_SUPPORTS_SH_CMT
+
+endchoice
+
+endif
+
+if SUPERH64
+
+choice
+	prompt "Processor sub-type selection"
+
+# SH-5 Processor Support
+
+config CPU_SUBTYPE_SH5_101
+	bool "Support SH5-101 processor"
+	select CPU_SH5
+
+config CPU_SUBTYPE_SH5_103
+	bool "Support SH5-103 processor"
+	select CPU_SH5
+
+endchoice
+
+endif
+
+source "arch/sh/mm/Kconfig"
+ 
+source "arch/sh/Kconfig.cpu"
+
+source "arch/sh/boards/Kconfig"
+
+menu "Timer and clock configuration"
+
+config SH_PCLK_FREQ
+	int "Peripheral clock frequency (in Hz)"
+	depends on SH_CLK_CPG_LEGACY
+	default "31250000" if CPU_SUBTYPE_SH7619
+	default "33333333" if CPU_SUBTYPE_SH7770 || \
+			      CPU_SUBTYPE_SH7760 || \
+			      CPU_SUBTYPE_SH7705 || \
+			      CPU_SUBTYPE_SH7203 || \
+			      CPU_SUBTYPE_SH7206 || \
+			      CPU_SUBTYPE_SH7263 || \
+			      CPU_SUBTYPE_MXG
+	default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
+	default "66000000" if CPU_SUBTYPE_SH4_202
+	default "50000000"
+	help
+	  This option is used to specify the peripheral clock frequency.
+	  This is necessary for determining the reference clock value on
+	  platforms lacking an RTC.
+
+config SH_CLK_CPG
+	def_bool y
+
+config SH_CLK_CPG_LEGACY
+	depends on SH_CLK_CPG
+	def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
+		      !CPU_SHX3 && !CPU_SUBTYPE_SH7757 && \
+		      !CPU_SUBTYPE_SH7734 && !CPU_SUBTYPE_SH7264 && \
+		      !CPU_SUBTYPE_SH7269
+
+endmenu
+
+menu "CPU Frequency scaling"
+source "drivers/cpufreq/Kconfig"
+endmenu
+
+source "arch/sh/drivers/Kconfig"
+
+endmenu
+
+menu "Kernel features"
+
+source kernel/Kconfig.hz
+
+config KEXEC
+	bool "kexec system call (EXPERIMENTAL)"
+	depends on SUPERH32 && MMU
+	select KEXEC_CORE
+	help
+	  kexec is a system call that implements the ability to shutdown your
+	  current kernel, and to start another kernel.  It is like a reboot
+	  but it is independent of the system firmware.  And like a reboot
+	  you can start any kernel with it, not just Linux.
+
+	  The name comes from the similarity to the exec system call.
+
+	  It is an ongoing process to be certain the hardware in a machine
+	  is properly shutdown, so do not be surprised if this code does not
+	  initially work for you.  As of this writing the exact hardware
+	  interface is strongly in flux, so no good recommendation can be
+	  made.
+
+config CRASH_DUMP
+	bool "kernel crash dumps (EXPERIMENTAL)"
+	depends on SUPERH32 && BROKEN_ON_SMP
+	help
+	  Generate crash dump after being started by kexec.
+	  This should be normally only set in special crash dump kernels
+	  which are loaded in the main kernel with kexec-tools into
+	  a specially reserved region and then later executed after
+	  a crash by kdump/kexec. The crash dump kernel must be compiled
+	  to a memory address not used by the main kernel using
+	  PHYSICAL_START.
+
+	  For more details see Documentation/kdump/kdump.txt
+
+config KEXEC_JUMP
+	bool "kexec jump (EXPERIMENTAL)"
+	depends on SUPERH32 && KEXEC && HIBERNATION
+	help
+	  Jump between original kernel and kexeced kernel and invoke
+	  code via KEXEC
+
+config PHYSICAL_START
+	hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
+	default MEMORY_START
+	---help---
+	  This gives the physical address where the kernel is loaded
+	  and is ordinarily the same as MEMORY_START.
+
+	  Different values are primarily used in the case of kexec on panic
+	  where the fail safe kernel needs to run at a different address
+	  than the panic-ed kernel.
+
+config SECCOMP
+	bool "Enable seccomp to safely compute untrusted bytecode"
+	depends on PROC_FS
+	help
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via prctl, it cannot be disabled and the task is only
+	  allowed to execute a few safe syscalls defined by each seccomp
+	  mode.
+
+	  If unsure, say N.
+
+config SMP
+	bool "Symmetric multi-processing support"
+	depends on SYS_SUPPORTS_SMP
+	---help---
+	  This enables support for systems with more than one CPU. If you have
+	  a system with only one CPU, say N. If you have a system with more
+	  than one CPU, say Y.
+
+	  If you say N here, the kernel will run on uni- and multiprocessor
+	  machines, but will use only one CPU of a multiprocessor machine. If
+	  you say Y here, the kernel will run on many, but not all,
+	  uniprocessor machines. On a uniprocessor machine, the kernel
+	  will run faster if you say N here.
+
+	  People using multiprocessor machines who say Y here should also say
+	  Y to "Enhanced Real Time Clock Support", below.
+
+	  See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
+	  available at <http://www.tldp.org/docs.html#howto>.
+
+	  If you don't know what to do here, say N.
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-32)"
+	range 2 32
+	depends on SMP
+	default "4" if CPU_SUBTYPE_SHX3
+	default "2"
+	help
+	  This allows you to specify the maximum number of CPUs which this
+	  kernel will support.  The maximum supported value is 32 and the
+	  minimum value which makes sense is 2.
+
+	  This is purely to save memory - each supported CPU adds
+	  approximately eight kilobytes to the kernel image.
+
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
+	depends on SMP
+	help
+	  Say Y here to experiment with turning CPUs off and on.  CPUs
+	  can be controlled through /sys/devices/system/cpu.
+
+source "kernel/Kconfig.preempt"
+
+config GUSA
+	def_bool y
+	depends on !SMP && SUPERH32
+	help
+	  This enables support for gUSA (general UserSpace Atomicity).
+	  This is the default implementation for both UP and non-ll/sc
+	  CPUs, and is used by the libc, amongst others.
+
+	  For additional information, design information can be found 
+	  in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
+
+	  This should only be disabled for special cases where alternate
+	  atomicity implementations exist.
+
+config GUSA_RB
+	bool "Implement atomic operations by roll-back (gRB) (EXPERIMENTAL)"
+	depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A)
+	help
+	  Enabling this option will allow the kernel to implement some
+	  atomic operations using a software implementation of load-locked/
+	  store-conditional (LLSC). On machines which do not have hardware
+	  LLSC, this should be more efficient than the other alternative of
+	  disabling interrupts around the atomic sequence.
+
+config HW_PERF_EVENTS
+	bool "Enable hardware performance counter support for perf events"
+	depends on PERF_EVENTS && CPU_HAS_PMU
+	default y
+	help
+	  Enable hardware performance counter support for perf events. If
+	  disabled, perf events will use software events only.
+
+source "drivers/sh/Kconfig"
+
+endmenu
+
+menu "Boot options"
+
+config USE_BUILTIN_DTB
+	bool "Use builtin DTB"
+	default n
+	depends on SH_DEVICE_TREE
+	help
+	  Link a device tree blob for particular hardware into the kernel,
+	  suppressing use of the DTB pointer provided by the bootloader.
+	  This option should only be used with legacy bootloaders that are
+	  not capable of providing a DTB to the kernel, or for experimental
+	  hardware without stable device tree bindings.
+
+config BUILTIN_DTB_SOURCE
+	string "Source file for builtin DTB"
+	default ""
+	depends on USE_BUILTIN_DTB
+	help
+	  Base name (without suffix, relative to arch/sh/boot/dts) for the
+	  a DTS file that will be used to produce the DTB linked into the
+	  kernel.
+
+config ZERO_PAGE_OFFSET
+	hex
+	default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \
+				SH_7751_SOLUTION_ENGINE
+	default "0x00004000" if PAGE_SIZE_16KB || SH_SH03
+	default "0x00002000" if PAGE_SIZE_8KB
+	default "0x00001000"
+	help
+	  This sets the default offset of zero page.
+
+config BOOT_LINK_OFFSET
+	hex
+	default "0x00210000" if SH_SHMIN
+	default "0x00400000" if SH_CAYMAN
+	default "0x00810000" if SH_7780_SOLUTION_ENGINE
+	default "0x009e0000" if SH_TITAN
+	default "0x01800000" if SH_SDK7780
+	default "0x02000000" if SH_EDOSK7760
+	default "0x00800000"
+	help
+	  This option allows you to set the link address offset of the zImage.
+	  This can be useful if you are on a board which has a small amount of
+	  memory.
+
+config ENTRY_OFFSET
+	hex
+	default "0x00001000" if PAGE_SIZE_4KB
+	default "0x00002000" if PAGE_SIZE_8KB
+	default "0x00004000" if PAGE_SIZE_16KB
+	default "0x00010000" if PAGE_SIZE_64KB
+	default "0x00000000"
+
+config ROMIMAGE_MMCIF
+	bool "Include MMCIF loader in romImage (EXPERIMENTAL)"
+	depends on CPU_SUBTYPE_SH7724
+	help
+	  Say Y here to include experimental MMCIF loading code in
+	  romImage. With this enabled it is possible to write the romImage
+	  kernel image to an MMC card and boot the kernel straight from
+	  the reset vector. At reset the processor Mask ROM will load the
+	  first part of the romImage which in turn loads the rest the kernel
+	  image to RAM using the MMCIF hardware block.
+
+choice
+	prompt "Kernel command line"
+	optional
+	default CMDLINE_OVERWRITE
+	help
+	  Setting this option allows the kernel command line arguments
+	  to be set.
+
+config CMDLINE_OVERWRITE
+	bool "Overwrite bootloader kernel arguments"
+	help
+	  Given string will overwrite any arguments passed in by
+	  a bootloader.
+
+config CMDLINE_EXTEND
+	bool "Extend bootloader kernel arguments"
+	help
+	  Given string will be concatenated with arguments passed in
+	  by a bootloader.
+
+endchoice
+
+config CMDLINE
+	string "Kernel command line arguments string"
+	depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND
+	default "console=ttySC1,115200"
+
+endmenu
+
+menu "Bus options"
+
+config SUPERHYWAY
+	tristate "SuperHyway Bus support"
+	depends on CPU_SUBTYPE_SH4_202
+
+config MAPLE
+	bool "Maple Bus support"
+	depends on SH_DREAMCAST
+	help
+	 The Maple Bus is SEGA's serial communication bus for peripherals
+	 on the Dreamcast. Without this bus support you won't be able to
+	 get your Dreamcast keyboard etc to work, so most users
+	 probably want to say 'Y' here, unless you are only using the
+	 Dreamcast with a serial line terminal or a remote network
+	 connection.
+
+config PCI
+	bool "PCI support"
+	depends on SYS_SUPPORTS_PCI
+	select PCI_DOMAINS
+	select GENERIC_PCI_IOMAP
+	select NO_GENERIC_PCI_IOPORT_MAP
+	help
+	  Find out whether you have a PCI motherboard. PCI is the name of a
+	  bus system, i.e. the way the CPU talks to the other stuff inside
+	  your box. If you have PCI, say Y, otherwise N.
+
+config PCI_DOMAINS
+	bool
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+menu "Power management options (EXPERIMENTAL)"
+
+source "kernel/power/Kconfig"
+
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/sh/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/src/kernel/linux/v4.14/arch/sh/Kconfig.cpu b/src/kernel/linux/v4.14/arch/sh/Kconfig.cpu
new file mode 100644
index 0000000..4a4edc7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/Kconfig.cpu
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0
+menu "Processor features"
+
+choice
+	prompt "Endianness selection" 
+	default CPU_LITTLE_ENDIAN
+	help
+	  Some SuperH machines can be configured for either little or big
+	  endian byte order. These modes require different kernels.
+
+config CPU_LITTLE_ENDIAN
+	bool "Little Endian"
+
+config CPU_BIG_ENDIAN
+	bool "Big Endian"
+	depends on !CPU_SH5
+
+endchoice
+
+config SH_FPU
+	def_bool y
+	prompt "FPU support"
+	depends on CPU_HAS_FPU
+	help
+	  Selecting this option will enable support for SH processors that
+	  have FPU units (ie, SH77xx).
+
+	  This option must be set in order to enable the FPU.
+
+config SH64_FPU_DENORM_FLUSH
+	bool "Flush floating point denorms to zero"
+	depends on SH_FPU && SUPERH64
+
+config SH_FPU_EMU
+	def_bool n
+	prompt "FPU emulation support"
+	depends on !SH_FPU
+	help
+	  Selecting this option will enable support for software FPU emulation.
+	  Most SH-3 users will want to say Y here, whereas most SH-4 users will
+	  want to say N.
+
+config SH_DSP
+	def_bool y
+	prompt "DSP support"
+	depends on CPU_HAS_DSP
+	help
+	  Selecting this option will enable support for SH processors that
+	  have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
+
+	  This option must be set in order to enable the DSP.
+
+config SH_ADC
+	def_bool y
+	prompt "ADC support"
+	depends on CPU_SH3
+	help
+	  Selecting this option will allow the Linux kernel to use SH3 on-chip
+	  ADC module.
+
+	  If unsure, say N.
+
+config SH_STORE_QUEUES
+	bool "Support for Store Queues"
+	depends on CPU_SH4
+	help
+	  Selecting this option will enable an in-kernel API for manipulating
+	  the store queues integrated in the SH-4 processors.
+
+config SPECULATIVE_EXECUTION
+	bool "Speculative subroutine return"
+	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7786
+	help
+	  This enables support for a speculative instruction fetch for
+	  subroutine return. There are various pitfalls associated with
+	  this, as outlined in the SH7780 hardware manual.
+
+	  If unsure, say N.
+
+config SH64_ID2815_WORKAROUND
+	bool "Include workaround for SH5-101 cut2 silicon defect ID2815"
+	depends on CPU_SUBTYPE_SH5_101
+
+config CPU_HAS_INTEVT
+	bool
+
+config CPU_HAS_IPR_IRQ
+	bool
+
+config CPU_HAS_SR_RB
+	bool
+	help
+	  This will enable the use of SR.RB register bank usage. Processors
+	  that are lacking this bit must have another method in place for
+	  accomplishing what is taken care of by the banked registers.
+
+	  See <file:Documentation/sh/register-banks.txt> for further
+	  information on SR.RB and register banking in the kernel in general.
+
+config CPU_HAS_PTEAEX
+	bool
+
+config CPU_HAS_DSP
+	bool
+
+config CPU_HAS_FPU
+	bool
+
+endmenu
diff --git a/src/kernel/linux/v4.14/arch/sh/Kconfig.debug b/src/kernel/linux/v4.14/arch/sh/Kconfig.debug
new file mode 100644
index 0000000..d076767
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/Kconfig.debug
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+menu "Kernel hacking"
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
+source "lib/Kconfig.debug"
+
+config SH_STANDARD_BIOS
+	bool "Use LinuxSH standard BIOS"
+	depends on SUPERH32
+	help
+	  Say Y here if your target has the gdb-sh-stub
+	  package from www.m17n.org (or any conforming standard LinuxSH BIOS)
+	  in FLASH or EPROM.  The kernel will use standard BIOS calls during
+	  boot for various housekeeping tasks (including calls to read and
+	  write characters to a system console, get a MAC address from an
+	  on-board Ethernet interface, and shut down the hardware).  Note this
+	  does not work with machines with an existing operating system in
+	  mask ROM and no flash (WindowsCE machines fall in this category).
+	  If unsure, say N.
+
+config STACK_DEBUG
+	bool "Check for stack overflows"
+	depends on DEBUG_KERNEL && SUPERH32
+	help
+	  This option will cause messages to be printed if free stack space
+	  drops below a certain limit. Saying Y here will add overhead to
+	  every function call and will therefore incur a major
+	  performance hit. Most users should say N.
+
+config 4KSTACKS
+	bool "Use 4Kb for kernel stacks instead of 8Kb"
+	depends on DEBUG_KERNEL && (MMU || BROKEN) && !PAGE_SIZE_64KB
+	help
+	  If you say Y here the kernel will use a 4Kb stacksize for the
+	  kernel stack attached to each process/thread. This facilitates
+	  running more threads on a system and also reduces the pressure
+	  on the VM subsystem for higher order allocations. This option
+	  will also use IRQ stacks to compensate for the reduced stackspace.
+
+config IRQSTACKS
+	bool "Use separate kernel stacks when processing interrupts"
+	depends on DEBUG_KERNEL && SUPERH32 && BROKEN
+	help
+	  If you say Y here the kernel will use separate kernel stacks
+	  for handling hard and soft interrupts.  This can help avoid
+	  overflowing the process kernel stacks.
+
+config DUMP_CODE
+	bool "Show disassembly of nearby code in register dumps"
+	depends on DEBUG_KERNEL && SUPERH32
+	default y if DEBUG_BUGVERBOSE
+	default n
+	help
+	  This prints out a code trace of the instructions leading up to
+	  the faulting instruction as a debugging aid. As this does grow
+	  the kernel in size a bit, most users will want to say N here.
+
+	  Those looking for more verbose debugging output should say Y.
+
+config DWARF_UNWINDER
+	bool "Enable the DWARF unwinder for stacktraces"
+	select FRAME_POINTER
+	depends on SUPERH32
+	default n
+	help
+	  Enabling this option will make stacktraces more accurate, at
+	  the cost of an increase in overall kernel size.
+
+config SH_NO_BSS_INIT
+	bool "Avoid zeroing BSS (to speed-up startup on suitable platforms)"
+	depends on DEBUG_KERNEL
+	default n
+	help
+	  If running in painfully slow environments, such as an RTL
+	  simulation or from remote memory via SHdebug, where the memory
+	  can already be guaranteed to ber zeroed on boot, say Y.
+
+	  For all other cases, say N. If this option seems perplexing, or
+	  you aren't sure, say N.
+
+config SH64_SR_WATCH
+	bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
+	depends on SUPERH64
+
+config MCOUNT
+	def_bool y
+	depends on SUPERH32
+	depends on STACK_DEBUG || FUNCTION_TRACER
+
+endmenu
diff --git a/src/kernel/linux/v4.14/arch/sh/Makefile b/src/kernel/linux/v4.14/arch/sh/Makefile
new file mode 100644
index 0000000..280bbff
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/Makefile
@@ -0,0 +1,240 @@
+#
+# arch/sh/Makefile
+#
+# Copyright (C) 1999  Kaz Kojima
+# Copyright (C) 2002 - 2008  Paul Mundt
+# Copyright (C) 2002  M. R. Brown
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+ifneq ($(SUBARCH),$(ARCH))
+  ifeq ($(CROSS_COMPILE),)
+    CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux-  $(UTS_MACHINE)-linux-gnu-  $(UTS_MACHINE)-unknown-linux-gnu-)
+  endif
+endif
+
+isa-y					:= any
+isa-$(CONFIG_SH_DSP)			:= sh
+isa-$(CONFIG_CPU_SH2)			:= sh2
+isa-$(CONFIG_CPU_SH2A)			:= sh2a
+isa-$(CONFIG_CPU_SH3)			:= sh3
+isa-$(CONFIG_CPU_SH4)			:= sh4
+isa-$(CONFIG_CPU_SH4A)			:= sh4a
+isa-$(CONFIG_CPU_SH4AL_DSP)		:= sh4al
+isa-$(CONFIG_CPU_SH5)			:= shmedia
+
+ifeq ($(CONFIG_SUPERH32),y)
+isa-$(CONFIG_SH_DSP)			:= $(isa-y)-dsp
+isa-y					:= $(isa-y)-up
+endif
+
+cflags-$(CONFIG_CPU_SH2)		:= $(call cc-option,-m2,)
+cflags-$(CONFIG_CPU_J2)			+= $(call cc-option,-mj2,)
+cflags-$(CONFIG_CPU_SH2A)		+= $(call cc-option,-m2a,) \
+					   $(call cc-option,-m2a-nofpu,) \
+					   $(call cc-option,-m4-nofpu,)
+cflags-$(CONFIG_CPU_SH3)		:= $(call cc-option,-m3,)
+cflags-$(CONFIG_CPU_SH4)		:= $(call cc-option,-m4,) \
+	$(call cc-option,-mno-implicit-fp,-m4-nofpu)
+cflags-$(CONFIG_CPU_SH4A)		+= $(call cc-option,-m4a,) \
+					   $(call cc-option,-m4a-nofpu,)
+cflags-$(CONFIG_CPU_SH4AL_DSP)		+= $(call cc-option,-m4al,)
+cflags-$(CONFIG_CPU_SH5)		:= $(call cc-option,-m5-32media-nofpu,)
+
+ifeq ($(cflags-y),)
+#
+# In the case where we are stuck with a compiler that has been uselessly
+# restricted to a particular ISA, a favourite default of newer GCCs when
+# extensive multilib targets are not provided, ensure we get the best fit
+# regarding FP generation. This is intentionally stupid (albeit many
+# orders of magnitude less than GCC's default behaviour), as anything
+# with a large number of multilib targets better have been built
+# correctly for the target in mind.
+#
+cflags-y	+= $(shell $(CC) $(KBUILD_CFLAGS) -print-multi-lib | \
+		     grep nofpu | sed q | sed -e 's/^/-/;s/;.*$$//')
+# At this point, anything goes.
+isaflags-y	:= $(call as-option,-Wa$(comma)-isa=any,)
+else
+#
+# -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that
+# support it, while -Wa,-dsp by itself limits the range of usable opcodes
+# on certain CPU subtypes. Try the ISA variant first, and if that fails,
+# fall back on -Wa,-dsp for the old binutils versions. Even without DSP
+# opcodes, we always want the best ISA tuning the version of binutils
+# will provide.
+#
+isaflags-y	:= $(call as-option,-Wa$(comma)-isa=$(isa-y),)
+
+isaflags-$(CONFIG_SH_DSP)		:= \
+	$(call as-option,-Wa$(comma)-isa=$(isa-y),-Wa$(comma)-dsp)
+endif
+
+cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mb
+cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -ml
+
+cflags-y	+= $(call cc-option,-mno-fdpic)
+cflags-y	+= $(isaflags-y) -ffreestanding
+
+OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment \
+		   -R .stab -R .stabstr -S
+
+# Give the various platforms the opportunity to set default image types
+defaultimage-$(CONFIG_SUPERH32)			:= zImage
+defaultimage-$(CONFIG_SH_SH7785LCR)		:= uImage
+defaultimage-$(CONFIG_SH_RSK)			:= uImage
+defaultimage-$(CONFIG_SH_URQUELL)		:= uImage
+defaultimage-$(CONFIG_SH_MIGOR)			:= uImage
+defaultimage-$(CONFIG_SH_AP325RXA)		:= uImage
+defaultimage-$(CONFIG_SH_SH7757LCR)		:= uImage
+defaultimage-$(CONFIG_SH_7724_SOLUTION_ENGINE)	:= uImage
+defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE)	:= vmlinux
+defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE)	:= vmlinux
+
+# Set some sensible Kbuild defaults
+boot := arch/sh/boot
+KBUILD_IMAGE		:= $(boot)/$(defaultimage-y)
+
+#
+# Choosing incompatible machines durings configuration will result in
+# error messages during linking.
+#
+ifdef CONFIG_SUPERH32
+UTS_MACHINE		:= sh
+BITS			:= 32
+LDFLAGS_vmlinux		+= -e _stext
+KBUILD_DEFCONFIG	:= shx3_defconfig
+else
+UTS_MACHINE		:= sh64
+BITS			:= 64
+LDFLAGS_vmlinux		+= --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \
+			   --defsym phys_stext_shmedia=phys_stext+1 \
+			   -e phys_stext_shmedia
+KBUILD_DEFCONFIG	:= cayman_defconfig
+endif
+
+ifdef CONFIG_CPU_LITTLE_ENDIAN
+ld-bfd			:= elf32-$(UTS_MACHINE)-linux
+LDFLAGS_vmlinux		+= --defsym jiffies=jiffies_64 --oformat $(ld-bfd)
+LDFLAGS			+= -EL
+else
+ld-bfd			:= elf32-$(UTS_MACHINE)big-linux
+LDFLAGS_vmlinux		+= --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd)
+LDFLAGS			+= -EB
+endif
+
+export ld-bfd BITS
+
+head-y	:= arch/sh/kernel/head_$(BITS).o
+
+core-y				+= arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
+core-$(CONFIG_SH_FPU_EMU)	+= arch/sh/math-emu/
+
+core-$(CONFIG_USE_BUILTIN_DTB)	+= arch/sh/boot/dts/
+
+# Mach groups
+machdir-$(CONFIG_SOLUTION_ENGINE)		+= mach-se
+machdir-$(CONFIG_SH_HP6XX)			+= mach-hp6xx
+machdir-$(CONFIG_SH_DREAMCAST)			+= mach-dreamcast
+machdir-$(CONFIG_SH_SH03)			+= mach-sh03
+machdir-$(CONFIG_SH_RTS7751R2D)			+= mach-r2d
+machdir-$(CONFIG_SH_HIGHLANDER)			+= mach-highlander
+machdir-$(CONFIG_SH_MIGOR)			+= mach-migor
+machdir-$(CONFIG_SH_AP325RXA)			+= mach-ap325rxa
+machdir-$(CONFIG_SH_KFR2R09)			+= mach-kfr2r09
+machdir-$(CONFIG_SH_ECOVEC)			+= mach-ecovec24
+machdir-$(CONFIG_SH_SDK7780)			+= mach-sdk7780
+machdir-$(CONFIG_SH_SDK7786)			+= mach-sdk7786
+machdir-$(CONFIG_SH_X3PROTO)			+= mach-x3proto
+machdir-$(CONFIG_SH_SH7763RDP)			+= mach-sh7763rdp
+machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= mach-microdev
+machdir-$(CONFIG_SH_LANDISK)			+= mach-landisk
+machdir-$(CONFIG_SH_LBOX_RE2)			+= mach-lboxre2
+machdir-$(CONFIG_SH_CAYMAN)			+= mach-cayman
+machdir-$(CONFIG_SH_RSK)			+= mach-rsk
+
+ifneq ($(machdir-y),)
+core-y	+= $(addprefix arch/sh/boards/, \
+	     $(filter-out ., $(patsubst %,%/,$(machdir-y))))
+endif
+
+# Common machine type headers. Not part of the arch/sh/boards/ hierarchy.
+machdir-y	+= mach-common
+
+# Companion chips
+core-$(CONFIG_HD6446X_SERIES)	+= arch/sh/cchips/hd6446x/
+
+#
+# CPU header paths
+#
+# These are ordered by optimization level. A CPU family that is a subset
+# of another (ie, SH-2A / SH-2), is picked up first, with increasing
+# levels of genericness if nothing more suitable is situated in the
+# hierarchy.
+#
+# As an example, in order of preference, SH-2A > SH-2 > common definitions.
+#
+cpuincdir-$(CONFIG_CPU_SH2A)	+= cpu-sh2a
+cpuincdir-$(CONFIG_CPU_SH2)	+= cpu-sh2
+cpuincdir-$(CONFIG_CPU_SH3)	+= cpu-sh3
+cpuincdir-$(CONFIG_CPU_SH4A)	+= cpu-sh4a
+cpuincdir-$(CONFIG_CPU_SH4)	+= cpu-sh4
+cpuincdir-$(CONFIG_CPU_SH5)	+= cpu-sh5
+cpuincdir-y			+= cpu-common	# Must be last
+
+drivers-y			+= arch/sh/drivers/
+drivers-$(CONFIG_OPROFILE)	+= arch/sh/oprofile/
+
+cflags-y	+= $(foreach d, $(cpuincdir-y), -Iarch/sh/include/$(d)) \
+		   $(foreach d, $(machdir-y), -Iarch/sh/include/$(d))
+
+KBUILD_CFLAGS		+= -pipe $(cflags-y)
+KBUILD_CPPFLAGS		+= $(cflags-y)
+KBUILD_AFLAGS		+= $(cflags-y)
+
+ifeq ($(CONFIG_MCOUNT),y)
+  KBUILD_CFLAGS += -pg
+endif
+
+ifeq ($(CONFIG_DWARF_UNWINDER),y)
+  KBUILD_CFLAGS += -fasynchronous-unwind-tables
+endif
+
+libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
+libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
+
+BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.xz uImage.lzo \
+	       uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \
+	       romImage
+PHONY += $(BOOT_TARGETS)
+
+all: $(notdir $(KBUILD_IMAGE))
+
+$(BOOT_TARGETS): vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+compressed: zImage
+
+archprepare:
+	$(Q)$(MAKE) $(build)=arch/sh/tools include/generated/machtypes.h
+
+archclean:
+	$(Q)$(MAKE) $(clean)=$(boot)
+	$(Q)$(MAKE) $(clean)=arch/sh/kernel/vsyscall
+
+define archhelp
+	@echo '  zImage 	           - Compressed kernel image'
+	@echo '  romImage	           - Compressed ROM image, if supported'
+	@echo '  vmlinux.srec	           - Create an ELF S-record'
+	@echo '  vmlinux.bin	           - Create an uncompressed binary image'
+	@echo '* uImage  	           - Alias to bootable U-Boot image'
+	@echo '  uImage.srec	           - Create an S-record for U-Boot'
+	@echo '  uImage.bin	           - Kernel-only image for U-Boot (bin)'
+	@echo '* uImage.gz	           - Kernel-only image for U-Boot (gzip)'
+	@echo '  uImage.bz2	           - Kernel-only image for U-Boot (bzip2)'
+	@echo '  uImage.lzma	           - Kernel-only image for U-Boot (lzma)'
+	@echo '  uImage.xz	           - Kernel-only image for U-Boot (xz)'
+	@echo '  uImage.lzo	           - Kernel-only image for U-Boot (lzo)'
+endef
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/Kconfig b/src/kernel/linux/v4.14/arch/sh/boards/Kconfig
new file mode 100644
index 0000000..f42feab
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/Kconfig
@@ -0,0 +1,401 @@
+# SPDX-License-Identifier: GPL-2.0
+menu "Board support"
+
+config SOLUTION_ENGINE
+	bool
+
+config SH_ALPHA_BOARD
+	bool
+
+config SH_DEVICE_TREE
+	bool
+	select OF
+	select OF_EARLY_FLATTREE
+	select TIMER_OF
+	select COMMON_CLK
+	select GENERIC_CALIBRATE_DELAY
+
+config SH_JCORE_SOC
+	bool "J-Core SoC"
+	select SH_DEVICE_TREE
+	select CLKSRC_JCORE_PIT
+	select JCORE_AIC
+	depends on CPU_J2
+	help
+	  Select this option to include drivers core components of the
+	  J-Core SoC, including interrupt controllers and timers.
+
+config SH_SOLUTION_ENGINE
+	bool "SolutionEngine"
+	select SOLUTION_ENGINE
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
+	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+	  CPU_SUBTYPE_SH7750R 
+	help
+	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
+
+config SH_7206_SOLUTION_ENGINE
+	bool "SolutionEngine7206"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7206
+	help
+	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+	  evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+	bool "SolutionEngine7619"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7619
+	help
+	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+	  evaluation board.
+	
+config SH_7721_SOLUTION_ENGINE
+	bool "SolutionEngine7721"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7721
+	help
+	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
+	  evaluation board.
+
+config SH_7722_SOLUTION_ENGINE
+	bool "SolutionEngine7722"
+	select SOLUTION_ENGINE
+	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
+	depends on CPU_SUBTYPE_SH7722
+	help
+	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
+	  evaluation board.
+
+config SH_7724_SOLUTION_ENGINE
+	bool "SolutionEngine7724"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7724
+	select GPIOLIB
+	select SND_SOC_AK4642 if SND_SIMPLE_CARD
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	help
+	  Select 7724 SolutionEngine if configuring for a Hitachi SH7724
+	  evaluation board.
+
+config SH_7751_SOLUTION_ENGINE
+	bool "SolutionEngine7751"
+	select SOLUTION_ENGINE
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7751
+	help
+	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
+	  evaluation board.
+	  
+config SH_7780_SOLUTION_ENGINE
+	bool "SolutionEngine7780"
+	select SOLUTION_ENGINE
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
+	  evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+	bool "SolutionEngine7343"
+	select SOLUTION_ENGINE
+	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
+	depends on CPU_SUBTYPE_SH7343
+	help
+	  Select 7343 SolutionEngine if configuring for a Hitachi
+	  SH7343 (SH-Mobile 3AS) evaluation board.
+
+config SH_HP6XX
+	bool "HP6XX"
+	select SYS_SUPPORTS_APM_EMULATION
+	select HD6446X_SERIES
+	depends on CPU_SUBTYPE_SH7709
+	help
+	  Select HP6XX if configuring for a HP jornada HP6xx.
+	  More information (hardware only) at
+	  <http://www.hp.com/jornada/>.
+
+config SH_DREAMCAST
+	bool "Dreamcast"
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7091
+	help
+	  Select Dreamcast if configuring for a SEGA Dreamcast.
+	  More information at <http://www.linux-sh.org>
+
+config SH_SH03
+	bool "Interface CTP/PCI-SH03"
+	depends on CPU_SUBTYPE_SH7751
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  CTP/PCI-SH03 is a CPU module computer that is produced
+	  by Interface Corporation.
+	  More information at <http://www.interface.co.jp>
+
+config SH_SECUREEDGE5410
+	bool "SecureEdge5410"
+	depends on CPU_SUBTYPE_SH7751R
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  Select SecureEdge5410 if configuring for a SnapGear SH board.
+	  This includes both the OEM SecureEdge products as well as the
+	  SME product line.
+
+config SH_RTS7751R2D
+	bool "RTS7751R2D"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED if MMU
+	help
+	  Select RTS7751R2D if configuring for a Renesas Technology
+	  Sales SH-Graphics board.
+
+config SH_RSK
+	bool "Renesas Starter Kit"
+	depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
+	  CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	help
+	 Select this option if configuring for any of the RSK+ MCU
+	 evaluation platforms.
+
+config SH_SDK7780
+	bool "SDK7780R3"
+	depends on CPU_SUBTYPE_SH7780
+	select SYS_SUPPORTS_PCI
+	help
+	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
+	  evaluation board.
+
+config SH_SDK7786
+	bool "SDK7786"
+	depends on CPU_SUBTYPE_SH7786
+	select SYS_SUPPORTS_PCI
+	select NO_IOPORT_MAP if !PCI
+	select HAVE_SRAM_POOL
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	help
+	  Select SDK7786 if configuring for a Renesas Technology Europe
+	  SH7786-65nm board.
+
+config SH_HIGHLANDER
+	bool "Highlander"
+	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED if MMU
+
+config SH_SH7757LCR
+	bool "SH7757LCR"
+	depends on CPU_SUBTYPE_SH7757
+	select GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+
+config SH_SH7785LCR
+	bool "SH7785LCR"
+	depends on CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+	bool "SH7785LCR 29bit physmaps"
+	depends on SH_SH7785LCR && 29BIT
+	default y
+	help
+	  This board has 2 physical memory maps. It can be changed with
+	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+	  you can access all on-board device in 29bit address mode.
+
+config SH_SH7785LCR_PT
+	bool "SH7785LCR prototype board on 32-bit MMU mode"
+	depends on SH_SH7785LCR && 32BIT
+	default n
+	help
+	  If you use prototype board, this option is enabled.
+
+config SH_URQUELL
+	bool "Urquell"
+	depends on CPU_SUBTYPE_SH7786
+	select GPIOLIB
+	select SYS_SUPPORTS_PCI
+	select NO_IOPORT_MAP if !PCI
+
+config SH_MIGOR
+	bool "Migo-R"
+	depends on CPU_SUBTYPE_SH7722
+	select GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	help
+	  Select Migo-R if configuring for the SH7722 Migo-R platform
+          by Renesas System Solutions Asia Pte. Ltd.
+
+config SH_AP325RXA
+	bool "AP-325RXA"
+	depends on CPU_SUBTYPE_SH7723
+	select GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	help
+	  Renesas "AP-325RXA" support.
+	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+
+config SH_KFR2R09
+	bool "KFR2R09"
+	depends on CPU_SUBTYPE_SH7724
+	select GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	help
+	  "Kit For R2R for 2009" support.
+
+config SH_ECOVEC
+	bool "EcoVec"
+	depends on CPU_SUBTYPE_SH7724
+	select GPIOLIB
+	select SND_SOC_DA7210 if SND_SIMPLE_CARD
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	help
+	  Renesas "R0P7724LC0011/21RL (EcoVec)" support.
+
+config SH_SH7763RDP
+	bool "SH7763RDP"
+	depends on CPU_SUBTYPE_SH7763
+	help
+	  Select SH7763RDP if configuring for a Renesas SH7763
+	  evaluation board.
+
+config SH_ESPT
+	bool "ESPT"
+	depends on CPU_SUBTYPE_SH7763
+	help
+	  Select ESPT if configuring for a Renesas SH7763
+	  with gigabit ether evaluation board.
+
+config SH_EDOSK7705
+	bool "EDOSK7705"
+	depends on CPU_SUBTYPE_SH7705
+
+config SH_EDOSK7760
+	bool "EDOSK7760"
+	depends on CPU_SUBTYPE_SH7760
+	help
+	  Select if configuring for a Renesas EDOSK7760
+	  evaluation board.
+
+config SH_SH4202_MICRODEV
+	bool "SH4-202 MicroDev"
+	depends on CPU_SUBTYPE_SH4_202
+	help
+	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+	  with an SH4-202 CPU.
+
+config SH_LANDISK
+	bool "LANDISK"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	help
+	  I-O DATA DEVICE, INC. "LANDISK Series" support.
+
+config SH_TITAN
+	bool "TITAN"
+	depends on CPU_SUBTYPE_SH7751R
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  Select Titan if you are configuring for a Nimble Microsystems
+	  NetEngine NP51R.
+
+config SH_SHMIN
+	bool "SHMIN"
+	depends on CPU_SUBTYPE_SH7706
+	select CPU_HAS_IPR_IRQ
+	help
+	  Select SHMIN if configuring for the SHMIN board.
+
+config SH_LBOX_RE2
+	bool "L-BOX RE2"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	help
+	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+
+config SH_X3PROTO
+	bool "SH-X3 Prototype board"
+	depends on CPU_SUBTYPE_SHX3
+	select NO_IOPORT_MAP if !PCI
+	select IRQ_DOMAIN
+
+config SH_MAGIC_PANEL_R2
+	bool "Magic Panel R2"
+	depends on CPU_SUBTYPE_SH7720
+	select GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	help
+	  Select Magic Panel R2 if configuring for Magic Panel R2.
+
+config SH_CAYMAN
+	bool "Hitachi Cayman"
+	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
+	select SYS_SUPPORTS_PCI
+	select ARCH_MIGHT_HAVE_PC_SERIO
+
+config SH_POLARIS
+	bool "SMSC Polaris"
+	select CPU_HAS_IPR_IRQ
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	depends on CPU_SUBTYPE_SH7709
+	help
+	  Select if configuring for an SMSC Polaris development board
+
+config SH_SH2007
+	bool "SH-2007 board"
+	select NO_IOPORT_MAP
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  SH-2007 is a single-board computer based around SH7780 chip
+	  intended for embedded applications.
+	  It has an Ethernet interface (SMC9118), direct connected
+	  Compact Flash socket, two serial ports and PC-104 bus.
+	  More information at <http://sh2000.sh-linux.org>.
+
+config SH_APSH4A3A
+	bool "AP-SH4A-3A"
+	select SH_ALPHA_BOARD
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	depends on CPU_SUBTYPE_SH7785
+	help
+	  Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
+
+config SH_APSH4AD0A
+	bool "AP-SH4AD-0A"
+	select SH_ALPHA_BOARD
+	select SYS_SUPPORTS_PCI
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	depends on CPU_SUBTYPE_SH7786
+	help
+	  Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
+
+source "arch/sh/boards/mach-r2d/Kconfig"
+source "arch/sh/boards/mach-highlander/Kconfig"
+source "arch/sh/boards/mach-sdk7780/Kconfig"
+source "arch/sh/boards/mach-migor/Kconfig"
+source "arch/sh/boards/mach-rsk/Kconfig"
+
+if SH_MAGIC_PANEL_R2
+
+menu "Magic Panel R2 options"
+
+config SH_MAGIC_PANEL_R2_VERSION
+	int "Magic Panel R2 Version"
+	default "3"
+	help
+	  Set the version of the Magic Panel R2
+
+endmenu
+
+endif
+
+endmenu
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/Makefile
new file mode 100644
index 0000000..4002a22
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/Makefile
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Specific board support, not covered by a mach group.
+#
+obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
+obj-$(CONFIG_SH_SECUREEDGE5410)	+= board-secureedge5410.o
+obj-$(CONFIG_SH_SH2007)		+= board-sh2007.o
+obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
+obj-$(CONFIG_SH_URQUELL)	+= board-urquell.o
+obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
+obj-$(CONFIG_SH_EDOSK7705)	+= board-edosk7705.o
+obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o
+obj-$(CONFIG_SH_ESPT)		+= board-espt.o
+obj-$(CONFIG_SH_POLARIS)	+= board-polaris.o
+obj-$(CONFIG_SH_TITAN)		+= board-titan.o
+obj-$(CONFIG_SH_SH7757LCR)	+= board-sh7757lcr.o
+obj-$(CONFIG_SH_APSH4A3A)	+= board-apsh4a3a.o
+obj-$(CONFIG_SH_APSH4AD0A)	+= board-apsh4ad0a.o
+
+obj-$(CONFIG_SH_DEVICE_TREE)	+= of-generic.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/board-apsh4a3a.c b/src/kernel/linux/v4.14/arch/sh/boards/board-apsh4a3a.c
new file mode 100644
index 0000000..0a39c24
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/board-apsh4a3a.c
@@ -0,0 +1,185 @@
+/*
+ * ALPHAPROJECT AP-SH4A-3A Support.
+ *
+ * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ * Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/physmap.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+#include <asm/clock.h>
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 4,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x01000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.name		= "smsc911x-memory",
+		.start		= 0xA4000000,
+		.end		= 0xA4000000 + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name		= "smsc911x-irq",
+		.start		= evt2irq(0x200),
+		.end		= evt2irq(0x200),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_16BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct platform_device *apsh4a3a_devices[] __initdata = {
+	&nor_flash_device,
+	&smsc911x_device,
+};
+
+static int __init apsh4a3a_devices_setup(void)
+{
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	return platform_add_devices(apsh4a3a_devices,
+				    ARRAY_SIZE(apsh4a3a_devices));
+}
+device_initcall(apsh4a3a_devices_setup);
+
+static int apsh4a3a_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(NULL, "extal");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333000);
+	clk_put(clk);
+
+	return ret;
+}
+
+/* Initialize the board */
+static void __init apsh4a3a_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "Alpha Project AP-SH4A-3A support:\n");
+}
+
+static void __init apsh4a3a_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+}
+
+/* Return the board specific boot mode pin configuration */
+static int apsh4a3a_mode_pins(void)
+{
+	int value = 0;
+
+	/* These are the factory default settings of SW1 and SW2.
+	 * If you change these dip switches then you will need to
+	 * adjust the values below as well.
+	 */
+	value &= ~MODE_PIN0;  /* Clock Mode 16 */
+	value &= ~MODE_PIN1;
+	value &= ~MODE_PIN2;
+	value &= ~MODE_PIN3;
+	value |=  MODE_PIN4;
+	value &= ~MODE_PIN5;  /* 16-bit Area0 bus width */
+	value |=  MODE_PIN6;  /* Area 0 SRAM interface */
+	value |=  MODE_PIN7;
+	value |=  MODE_PIN8;  /* Little Endian */
+	value |=  MODE_PIN9;  /* Master Mode */
+	value |=  MODE_PIN10; /* Crystal resonator */
+	value |=  MODE_PIN11; /* Display Unit */
+	value |=  MODE_PIN12;
+	value &= ~MODE_PIN13; /* 29-bit address mode */
+	value |=  MODE_PIN14; /* No PLL step-up */
+
+	return value;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_apsh4a3a __initmv = {
+	.mv_name		= "AP-SH4A-3A",
+	.mv_setup		= apsh4a3a_setup,
+	.mv_clk_init		= apsh4a3a_clk_init,
+	.mv_init_irq		= apsh4a3a_init_irq,
+	.mv_mode_pins		= apsh4a3a_mode_pins,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/board-apsh4ad0a.c b/src/kernel/linux/v4.14/arch/sh/boards/board-apsh4ad0a.c
new file mode 100644
index 0000000..92eac3a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/board-apsh4ad0a.c
@@ -0,0 +1,135 @@
+/*
+ * ALPHAPROJECT AP-SH4AD-0A Support.
+ *
+ * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
+ * Copyright (C) 2010  Matt Fleming
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.name		= "smsc911x-memory",
+		.start		= 0xA4000000,
+		.end		= 0xA4000000 + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name		= "smsc911x-irq",
+		.start		= evt2irq(0x200),
+		.end		= evt2irq(0x200),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_16BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct platform_device *apsh4ad0a_devices[] __initdata = {
+	&smsc911x_device,
+};
+
+static int __init apsh4ad0a_devices_setup(void)
+{
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	return platform_add_devices(apsh4ad0a_devices,
+				    ARRAY_SIZE(apsh4ad0a_devices));
+}
+device_initcall(apsh4ad0a_devices_setup);
+
+static int apsh4ad0a_mode_pins(void)
+{
+	int value = 0;
+
+	/* These are the factory default settings of SW1 and SW2.
+	 * If you change these dip switches then you will need to
+	 * adjust the values below as well.
+	 */
+	value |=  MODE_PIN0;  /* Clock Mode 3 */
+	value |=  MODE_PIN1;
+	value &= ~MODE_PIN2;
+	value &= ~MODE_PIN3;
+	value &= ~MODE_PIN4;  /* 16-bit Area0 bus width  */
+	value |=  MODE_PIN5;
+	value |=  MODE_PIN6;
+	value |=  MODE_PIN7;  /* Normal mode */
+	value |=  MODE_PIN8;  /* Little Endian */
+	value |=  MODE_PIN9;  /* Crystal resonator */
+	value &= ~MODE_PIN10; /* 29-bit address mode */
+	value &= ~MODE_PIN11; /* PCI-E Root port */
+	value &= ~MODE_PIN12; /* 4 lane + 1 lane */
+	value |=  MODE_PIN13; /* AUD Enable */
+	value &= ~MODE_PIN14; /* Normal Operation */
+
+	return value;
+}
+
+static int apsh4ad0a_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(NULL, "extal");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333000);
+	clk_put(clk);
+
+	return ret;
+}
+
+/* Initialize the board */
+static void __init apsh4ad0a_setup(char **cmdline_p)
+{
+	pr_info("Alpha Project AP-SH4AD-0A support:\n");
+}
+
+static void __init apsh4ad0a_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_apsh4ad0a __initmv = {
+	.mv_name		= "AP-SH4AD-0A",
+	.mv_setup		= apsh4ad0a_setup,
+	.mv_mode_pins		= apsh4ad0a_mode_pins,
+	.mv_clk_init		= apsh4ad0a_clk_init,
+	.mv_init_irq		= apsh4ad0a_init_irq,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/board-edosk7705.c b/src/kernel/linux/v4.14/arch/sh/boards/board-edosk7705.c
new file mode 100644
index 0000000..67a8803
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/board-edosk7705.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/boards/renesas/edosk7705/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for edosk7705 development
+ * board by S. Dunn, 2003.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smc91x.h>
+#include <linux/sh_intc.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+#define SMC_IOBASE	0xA2000000
+#define SMC_IO_OFFSET	0x300
+#define SMC_IOADDR	(SMC_IOBASE + SMC_IO_OFFSET)
+
+#define ETHERNET_IRQ	evt2irq(0x320)
+
+static void __init sh_edosk7705_init_irq(void)
+{
+	make_imask_irq(ETHERNET_IRQ);
+}
+
+/* eth initialization functions */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static struct resource smc91x_res[] = {
+	[0] = {
+		.start	= SMC_IOADDR,
+		.end	= SMC_IOADDR + SZ_32 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= ETHERNET_IRQ,
+		.end	= ETHERNET_IRQ,
+		.flags	= IORESOURCE_IRQ ,
+	}
+};
+
+static struct platform_device smc91x_dev = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_res),
+	.resource	= smc91x_res,
+
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+/* platform init code */
+static struct platform_device *edosk7705_devices[] __initdata = {
+	&smc91x_dev,
+};
+
+static int __init init_edosk7705_devices(void)
+{
+	return platform_add_devices(edosk7705_devices,
+				    ARRAY_SIZE(edosk7705_devices));
+}
+device_initcall(init_edosk7705_devices);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_edosk7705 __initmv = {
+	.mv_name		= "EDOSK7705",
+	.mv_init_irq		= sh_edosk7705_init_irq,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/board-edosk7760.c b/src/kernel/linux/v4.14/arch/sh/boards/board-edosk7760.c
new file mode 100644
index 0000000..bab5b95
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/board-edosk7760.c
@@ -0,0 +1,191 @@
+/*
+ * Renesas Europe EDOSK7760 Board Support
+ *
+ * Copyright (C) 2008 SPES Societa' Progettazione Elettronica e Software Ltd.
+ * Author: Luca Santini <luca.santini@spesonline.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+#include <linux/interrupt.h>
+#include <linux/sh_intc.h>
+#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+#include <asm/delay.h>
+#include <asm/i2c-sh7760.h>
+#include <asm/sizes.h>
+
+/* Bus state controller registers for CS4 area */
+#define BSC_CS4BCR	0xA4FD0010
+#define BSC_CS4WCR	0xA4FD0030
+
+#define SMC_IOBASE	0xA2000000
+#define SMC_IO_OFFSET	0x300
+#define SMC_IOADDR	(SMC_IOBASE + SMC_IO_OFFSET)
+
+/* NOR flash */
+static struct mtd_partition edosk7760_nor_flash_partitions[] = {
+	{
+		.name = "bootloader",
+		.offset = 0,
+		.size = SZ_256K,
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = SZ_2M,
+	}, {
+		.name = "fs",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (26 << 20),
+	}, {
+		.name = "other",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data edosk7760_nor_flash_data = {
+	.width		= 4,
+	.parts		= edosk7760_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(edosk7760_nor_flash_partitions),
+};
+
+static struct resource edosk7760_nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x00000000 + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device edosk7760_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= edosk7760_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(edosk7760_nor_flash_resources),
+	.dev		= {
+		.platform_data = &edosk7760_nor_flash_data,
+	},
+};
+
+/* i2c initialization functions */
+static struct sh7760_i2c_platdata i2c_pd = {
+	.speed_khz	= 400,
+};
+
+static struct resource sh7760_i2c1_res[] = {
+	{
+		.start	= SH7760_I2C1_MMIO,
+		.end	= SH7760_I2C1_MMIOEND,
+		.flags	= IORESOURCE_MEM,
+	},{
+		.start	= evt2irq(0x9e0),
+		.end	= evt2irq(0x9e0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh7760_i2c1_dev = {
+	.dev    = {
+		.platform_data	= &i2c_pd,
+	},
+
+	.name		= SH7760_I2C_DEVNAME,
+	.id		= 1,
+	.resource	= sh7760_i2c1_res,
+	.num_resources	= ARRAY_SIZE(sh7760_i2c1_res),
+};
+
+static struct resource sh7760_i2c0_res[] = {
+	{
+		.start	= SH7760_I2C0_MMIO,
+		.end	= SH7760_I2C0_MMIOEND,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= evt2irq(0x9c0),
+		.end	= evt2irq(0x9c0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh7760_i2c0_dev = {
+	.dev    = {
+		.platform_data	= &i2c_pd,
+	},
+	.name		= SH7760_I2C_DEVNAME,
+	.id		= 0,
+	.resource	= sh7760_i2c0_res,
+	.num_resources	= ARRAY_SIZE(sh7760_i2c0_res),
+};
+
+/* eth initialization functions */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static struct resource smc91x_res[] = {
+	[0] = {
+		.start	= SMC_IOADDR,
+		.end	= SMC_IOADDR + SZ_32 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x2a0),
+		.end	= evt2irq(0x2a0),
+		.flags	= IORESOURCE_IRQ ,
+	}
+};
+
+static struct platform_device smc91x_dev = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_res),
+	.resource	= smc91x_res,
+
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+/* platform init code */
+static struct platform_device *edosk7760_devices[] __initdata = {
+	&smc91x_dev,
+	&edosk7760_nor_flash_device,
+	&sh7760_i2c0_dev,
+	&sh7760_i2c1_dev,
+};
+
+static int __init init_edosk7760_devices(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+
+	return platform_add_devices(edosk7760_devices,
+				    ARRAY_SIZE(edosk7760_devices));
+}
+device_initcall(init_edosk7760_devices);
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_edosk7760 __initmv = {
+	.mv_name	= "EDOSK7760",
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/board-espt.c b/src/kernel/linux/v4.14/arch/sh/boards/board-espt.c
new file mode 100644
index 0000000..7291e2f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/board-espt.c
@@ -0,0 +1,109 @@
+/*
+ * Data Technology Inc. ESPT-GIGA board support
+ *
+ * Copyright (C) 2008, 2009 Renesas Solutions Corp.
+ * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <linux/sh_eth.h>
+#include <linux/sh_intc.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+/* NOR Flash */
+static struct mtd_partition espt_nor_flash_partitions[] = {
+	{
+		.name = "U-Boot",
+		.offset = 0,
+		.size = (2 * SZ_128K),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "Linux-Kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (20 * SZ_128K),
+	}, {
+		.name = "Root Filesystem",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data espt_nor_flash_data = {
+	.width = 2,
+	.parts = espt_nor_flash_partitions,
+	.nr_parts = ARRAY_SIZE(espt_nor_flash_partitions),
+};
+
+static struct resource espt_nor_flash_resources[] = {
+	[0] = {
+		.name = "NOR Flash",
+		.start = 0,
+		.end = SZ_8M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device espt_nor_flash_device = {
+	.name = "physmap-flash",
+	.resource = espt_nor_flash_resources,
+	.num_resources = ARRAY_SIZE(espt_nor_flash_resources),
+	.dev = {
+		.platform_data = &espt_nor_flash_data,
+	},
+};
+
+/* SH-Ether */
+static struct resource sh_eth_resources[] = {
+	{
+		.start  = 0xFEE00800,   /* use eth1 */
+		.end    = 0xFEE00F7C - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 0xFEE01800,   /* TSU */
+		.end    = 0xFEE01FFF,
+		.flags  = IORESOURCE_MEM,
+	}, {
+
+		.start  = evt2irq(0x920),   /* irq number */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7763_eth_pdata = {
+	.phy = 0,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device espt_eth_device = {
+	.name       = "sh7763-gether",
+	.resource   = sh_eth_resources,
+	.num_resources  = ARRAY_SIZE(sh_eth_resources),
+	.dev        = {
+		.platform_data = &sh7763_eth_pdata,
+	},
+};
+
+static struct platform_device *espt_devices[] __initdata = {
+	&espt_nor_flash_device,
+	&espt_eth_device,
+};
+
+static int __init espt_devices_setup(void)
+{
+	return platform_add_devices(espt_devices,
+				    ARRAY_SIZE(espt_devices));
+}
+device_initcall(espt_devices_setup);
+
+static struct sh_machine_vector mv_espt __initmv = {
+	.mv_name = "ESPT-GIGA",
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/board-magicpanelr2.c b/src/kernel/linux/v4.14/arch/sh/boards/board-magicpanelr2.c
new file mode 100644
index 0000000..2050085
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/board-magicpanelr2.c
@@ -0,0 +1,393 @@
+/*
+ * linux/arch/sh/boards/magicpanel/setup.c
+ *
+ *  Copyright (C) 2007  Markus Brunner, Mark Jonas
+ *
+ *  Magic Panel Release 2 board setup
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <linux/sh_intc.h>
+#include <mach/magicpanelr2.h>
+#include <asm/heartbeat.h>
+#include <cpu/sh7720.h>
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+#define LAN9115_READY	(__raw_readl(0xA8000084UL) & 0x00000001UL)
+
+/* Wait until reset finished. Timeout is 100ms. */
+static int __init ethernet_reset_finished(void)
+{
+	int i;
+
+	if (LAN9115_READY)
+		return 1;
+
+	for (i = 0; i < 10; ++i) {
+		mdelay(10);
+		if (LAN9115_READY)
+			return 1;
+	}
+
+	return 0;
+}
+
+static void __init reset_ethernet(void)
+{
+	/* PMDR: LAN_RESET=on */
+	CLRBITS_OUTB(0x10, PORT_PMDR);
+
+	udelay(200);
+
+	/* PMDR: LAN_RESET=off */
+	SETBITS_OUTB(0x10, PORT_PMDR);
+}
+
+static void __init setup_chip_select(void)
+{
+	/* CS2: LAN (0x08000000 - 0x0bffffff) */
+	/* no idle cycles, normal space, 8 bit data bus */
+	__raw_writel(0x36db0400, CS2BCR);
+	/* (SW:1.5 WR:3 HW:1.5), ext. wait */
+	__raw_writel(0x000003c0, CS2WCR);
+
+	/* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */
+	/* no idle cycles, normal space, 8 bit data bus */
+	__raw_writel(0x00000200, CS4BCR);
+	/* (SW:1.5 WR:3 HW:1.5), ext. wait */
+	__raw_writel(0x00100981, CS4WCR);
+
+	/* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */
+	/* no idle cycles, normal space, 8 bit data bus */
+	__raw_writel(0x00000200, CS5ABCR);
+	/* (SW:1.5 WR:3 HW:1.5), ext. wait */
+	__raw_writel(0x00100981, CS5AWCR);
+
+	/* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */
+	/* no idle cycles, normal space, 8 bit data bus */
+	__raw_writel(0x00000200, CS5BBCR);
+	/* (SW:1.5 WR:3 HW:1.5), ext. wait */
+	__raw_writel(0x00100981, CS5BWCR);
+
+	/* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */
+	/* no idle cycles, normal space, 8 bit data bus */
+	__raw_writel(0x00000200, CS6ABCR);
+	/* (SW:1.5 WR:3 HW:1.5), no ext. wait */
+	__raw_writel(0x001009C1, CS6AWCR);
+}
+
+static void __init setup_port_multiplexing(void)
+{
+	/* A7 GPO(LED8);     A6 GPO(LED7);     A5 GPO(LED6);	  A4 GPO(LED5);
+	 * A3 GPO(LED4);     A2 GPO(LED3);     A1 GPO(LED2);	  A0 GPO(LED1);
+	 */
+	__raw_writew(0x5555, PORT_PACR);	/* 01 01 01 01 01 01 01 01 */
+
+	/* B7 GPO(RST4);   B6 GPO(RST3);  B5 GPO(RST2);    B4 GPO(RST1);
+	 * B3 GPO(PB3);	   B2 GPO(PB2);	  B1 GPO(PB1);	   B0 GPO(PB0);
+	 */
+	__raw_writew(0x5555, PORT_PBCR);	/* 01 01 01 01 01 01 01 01 */
+
+	/* C7 GPO(PC7);	  C6 GPO(PC6);	  C5 GPO(PC5);	   C4 GPO(PC4);
+	 * C3 LCD_DATA3;  C2 LCD_DATA2;   C1 LCD_DATA1;	   C0 LCD_DATA0;
+	 */
+	__raw_writew(0x5500, PORT_PCCR);	/* 01 01 01 01 00 00 00 00 */
+
+	/* D7 GPO(PD7);	D6 GPO(PD6);	D5 GPO(PD5);	   D4 GPO(PD4);
+	 * D3 GPO(PD3);	D2 GPO(PD2);	D1 GPO(PD1);	   D0 GPO(PD0);
+	 */
+	__raw_writew(0x5555, PORT_PDCR);	/* 01 01 01 01 01 01 01 01 */
+
+	/* E7 (x);	  E6 GPI(nu);	 E5 GPI(nu);	  E4 LCD_M_DISP;
+	 * E3 LCD_CL1;	  E2 LCD_CL2;	 E1 LCD_DON;	  E0 LCD_FLM;
+	 */
+	__raw_writew(0x3C00, PORT_PECR);	/* 00 11 11 00 00 00 00 00 */
+
+	/* F7 (x);	     F6 DA1(VLCD);     F5 DA0(nc);	  F4 AN3;
+	 * F3 AN2(MID_AD);   F2 AN1(EARTH_AD); F1 AN0(TEMP);	  F0 GPI+(nc);
+	 */
+	__raw_writew(0x0002, PORT_PFCR);	/* 00 00 00 00 00 00 00 10 */
+
+	/* G7 (x);	  G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2);
+	 * G3 GPI(KEY1);  G2 GPO(LED11);	G1 GPO(LED10);     G0 GPO(LED9);
+	 */
+	__raw_writew(0x03D5, PORT_PGCR);	/* 00 00 00 11 11 01 01 01 */
+
+	/* H7 (x);	      H6 /RAS(BRAS);	  H5 /CAS(BCAS); H4 CKE(BCKE);
+	 * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR;	 H0 USB1_PWR;
+	 */
+	__raw_writew(0x0050, PORT_PHCR);	/* 00 00 00 00 01 01 00 00 */
+
+	/* J7 (x);	  J6 AUDCK;	   J5 ASEBRKAK;	    J4 AUDATA3;
+	 * J3 AUDATA2;	  J2 AUDATA1;	   J1 AUDATA0;	    J0 AUDSYNC;
+	 */
+	__raw_writew(0x0000, PORT_PJCR);	/* 00 00 00 00 00 00 00 00 */
+
+	/* K7 (x);	    K6 (x);	     K5 (x);	   K4 (x);
+	 * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY)
+	 */
+	__raw_writew(0x00FF, PORT_PKCR);	/* 00 00 00 00 11 11 11 11 */
+
+	/* L7 TRST;	   L6 TMS;	     L5 TDO;		  L4 TDI;
+	 * L3 TCK;	   L2 (x);	     L1 (x);		  L0 (x);
+	 */
+	__raw_writew(0x0000, PORT_PLCR);	/* 00 00 00 00 00 00 00 00 */
+
+	/* M7 GPO(CURRENT_SINK);    M6 GPO(PWR_SWITCH);     M5 GPO(LAN_SPEED);
+	 * M4 GPO(LAN_RESET);       M3 GPO(BUZZER);	    M2 GPO(LCD_BL);
+	 * M1 CS5B(CAN3_CS);	    M0 GPI+(nc);
+	 */
+	__raw_writew(0x5552, PORT_PMCR);	   /* 01 01 01 01 01 01 00 10 */
+
+	/* CURRENT_SINK=off,	PWR_SWITCH=off, LAN_SPEED=100MBit,
+	 * LAN_RESET=off,	BUZZER=off,	LCD_BL=off
+	 */
+#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2
+	__raw_writeb(0x30, PORT_PMDR);
+#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3
+	__raw_writeb(0xF0, PORT_PMDR);
+#else
+#error Unknown revision of PLATFORM_MP_R2
+#endif
+
+	/* P7 (x);	       P6 (x);		  P5 (x);
+	 * P4 GPO(nu);	       P3 IRQ3(LAN_IRQ);  P2 IRQ2(CAN3_IRQ);
+	 * P1 IRQ1(CAN2_IRQ);  P0 IRQ0(CAN1_IRQ)
+	 */
+	__raw_writew(0x0100, PORT_PPCR);	/* 00 00 00 01 00 00 00 00 */
+	__raw_writeb(0x10, PORT_PPDR);
+
+	/* R7 A25;	     R6 A24;	     R5 A23;		  R4 A22;
+	 * R3 A21;	     R2 A20;	     R1 A19;		  R0 A0;
+	 */
+	gpio_request(GPIO_FN_A25, NULL);
+	gpio_request(GPIO_FN_A24, NULL);
+	gpio_request(GPIO_FN_A23, NULL);
+	gpio_request(GPIO_FN_A22, NULL);
+	gpio_request(GPIO_FN_A21, NULL);
+	gpio_request(GPIO_FN_A20, NULL);
+	gpio_request(GPIO_FN_A19, NULL);
+	gpio_request(GPIO_FN_A0, NULL);
+
+	/* S7 (x);		S6 (x);        S5 (x);	     S4 GPO(EEPROM_CS2);
+	 * S3 GPO(EEPROM_CS1);  S2 SIOF0_TXD;  S1 SIOF0_RXD; S0 SIOF0_SCK;
+	 */
+	__raw_writew(0x0140, PORT_PSCR);	/* 00 00 00 01 01 00 00 00 */
+
+	/* T7 (x);	   T6 (x);	  T5 (x);	  T4 COM1_CTS;
+	 * T3 COM1_RTS;	   T2 COM1_TXD;	  T1 COM1_RXD;	  T0 GPO(WDOG)
+	 */
+	__raw_writew(0x0001, PORT_PTCR);	/* 00 00 00 00 00 00 00 01 */
+
+	/* U7 (x);	     U6 (x);	   U5 (x);	  U4 GPI+(/AC_FAULT);
+	 * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD;  U0 TOUCH_SCK;
+	 */
+	__raw_writew(0x0240, PORT_PUCR);	/* 00 00 00 10 01 00 00 00 */
+
+	/* V7 (x);	  V6 (x);	V5 (x);		  V4 GPO(MID2);
+	 * V3 GPO(MID1);  V2 CARD_TxD;	V1 CARD_RxD;	  V0 GPI+(/BAT_FAULT);
+	 */
+	__raw_writew(0x0142, PORT_PVCR);	/* 00 00 00 01 01 00 00 10 */
+}
+
+static void __init mpr2_setup(char **cmdline_p)
+{
+	/* set Pin Select Register A:
+	 * /PCC_CD1, /PCC_CD2,  PCC_BVD1, PCC_BVD2,
+	 * /IOIS16,  IRQ4,	IRQ5,	  USB1d_SUSPEND
+	 */
+	__raw_writew(0xAABC, PORT_PSELA);
+	/* set Pin Select Register B:
+	 * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC,
+	 * LCD_VEPWC,  IIC_SDA,    IIC_SCL, Reserved
+	 */
+	__raw_writew(0x3C00, PORT_PSELB);
+	/* set Pin Select Register C:
+	 * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved
+	 */
+	__raw_writew(0x0000, PORT_PSELC);
+	/* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK,
+	 * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved
+	 */
+	__raw_writew(0x0000, PORT_PSELD);
+	/* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */
+	__raw_writew(0x0101, PORT_UTRCTL);
+	/* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */
+	__raw_writew(0xA5C0, PORT_UCLKCR_W);
+
+	setup_chip_select();
+
+	setup_port_multiplexing();
+
+	reset_ethernet();
+
+	printk(KERN_INFO "Magic Panel Release 2 A.%i\n",
+				CONFIG_SH_MAGIC_PANEL_R2_VERSION);
+
+	if (ethernet_reset_finished() == 0)
+		printk(KERN_WARNING "Ethernet not ready\n");
+}
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= 0xa8000000,
+		.end		= 0xabffffff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= evt2irq(0x660),
+		.end		= evt2irq(0x660),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct heartbeat_data heartbeat_data = {
+	.flags		= HEARTBEAT_INVERTED,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct mtd_partition mpr2_partitions[] = {
+	/* Reserved for bootloader, read-only */
+	{
+		.name = "Bootloader",
+		.offset = 0x00000000UL,
+		.size = MPR2_MTD_BOOTLOADER_SIZE,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	/* Reserved for kernel image */
+	{
+		.name = "Kernel",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MPR2_MTD_KERNEL_SIZE,
+	},
+	/* Rest is used for Flash FS */
+	{
+		.name = "Flash_FS",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.parts		= mpr2_partitions,
+	.nr_parts	= ARRAY_SIZE(mpr2_partitions),
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x00000000,
+	.end		= 0x2000000UL,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+/*
+ * Add all resources to the platform_device
+ */
+
+static struct platform_device *mpr2_devices[] __initdata = {
+	&heartbeat_device,
+	&smsc911x_device,
+	&flash_device,
+};
+
+
+static int __init mpr2_devices_setup(void)
+{
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices));
+}
+device_initcall(mpr2_devices_setup);
+
+/*
+ * Initialize IRQ setting
+ */
+static void __init init_mpr2_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */
+
+	irq_set_irq_type(evt2irq(0x600), IRQ_TYPE_LEVEL_LOW);    /* IRQ0 CAN1 */
+	irq_set_irq_type(evt2irq(0x620), IRQ_TYPE_LEVEL_LOW);    /* IRQ1 CAN2 */
+	irq_set_irq_type(evt2irq(0x640), IRQ_TYPE_LEVEL_LOW);    /* IRQ2 CAN3 */
+	irq_set_irq_type(evt2irq(0x660), IRQ_TYPE_LEVEL_LOW);    /* IRQ3 SMSC9115 */
+	irq_set_irq_type(evt2irq(0x680), IRQ_TYPE_EDGE_RISING);  /* IRQ4 touchscreen */
+	irq_set_irq_type(evt2irq(0x6a0), IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */
+
+	intc_set_priority(evt2irq(0x600), 13);		/* IRQ0 CAN1 */
+	intc_set_priority(evt2irq(0x620), 13);		/* IRQ0 CAN2 */
+	intc_set_priority(evt2irq(0x640), 13);		/* IRQ0 CAN3 */
+	intc_set_priority(evt2irq(0x660), 6);		/* IRQ3 SMSC9115 */
+}
+
+/*
+ * The Machine Vector
+ */
+
+static struct sh_machine_vector mv_mpr2 __initmv = {
+	.mv_name		= "mpr2",
+	.mv_setup		= mpr2_setup,
+	.mv_init_irq		= init_mpr2_IRQ,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/board-polaris.c b/src/kernel/linux/v4.14/arch/sh/boards/board-polaris.c
new file mode 100644
index 0000000..3de7bac
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/board-polaris.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * June 2006 Steve Glendinning <steve.glendinning@shawell.net>
+ *
+ * Polaris-specific resource declaration
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+#include <cpu/gpio.h>
+#include <mach-se/mach/se.h>
+
+#define BCR2		(0xFFFFFF62)
+#define WCR2		(0xFFFFFF66)
+#define AREA5_WAIT_CTRL	(0x1C00)
+#define WAIT_STATES_10	(0x7)
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.name		= "smsc911x-memory",
+		.start		= PA_EXT5,
+		.end		= PA_EXT5 + 0x1fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name		= "smsc911x-irq",
+		.start		= IRQ0_IRQ,
+		.end		= IRQ0_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resource = {
+	.start	= PORT_PCDR,
+	.end	= PORT_PCDR,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+static struct platform_device *polaris_devices[] __initdata = {
+	&smsc911x_device,
+	&heartbeat_device,
+};
+
+static int __init polaris_initialise(void)
+{
+	u16 wcr, bcr_mask;
+
+	printk(KERN_INFO "Configuring Polaris external bus\n");
+
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	/* Configure area 5 with 2 wait states */
+	wcr = __raw_readw(WCR2);
+	wcr &= (~AREA5_WAIT_CTRL);
+	wcr |= (WAIT_STATES_10 << 10);
+	__raw_writew(wcr, WCR2);
+
+	/* Configure area 5 for 32-bit access */
+	bcr_mask = __raw_readw(BCR2);
+	bcr_mask |= 1 << 10;
+	__raw_writew(bcr_mask, BCR2);
+
+	return platform_add_devices(polaris_devices,
+				    ARRAY_SIZE(polaris_devices));
+}
+arch_initcall(polaris_initialise);
+
+static struct ipr_data ipr_irq_table[] = {
+	/* External IRQs */
+	{ IRQ0_IRQ, 0,  0,  1, },	/* IRQ0 */
+	{ IRQ1_IRQ, 0,  4,  1, },	/* IRQ1 */
+};
+
+static unsigned long ipr_offsets[] = {
+	INTC_IPRC
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+	.chip = {
+		.name	= "sh7709-ext",
+	},
+};
+
+static void __init init_polaris_irq(void)
+{
+	/* Disable all interrupts */
+	__raw_writew(0, BCR_ILCRA);
+	__raw_writew(0, BCR_ILCRB);
+	__raw_writew(0, BCR_ILCRC);
+	__raw_writew(0, BCR_ILCRD);
+	__raw_writew(0, BCR_ILCRE);
+	__raw_writew(0, BCR_ILCRF);
+	__raw_writew(0, BCR_ILCRG);
+
+	register_ipr_controller(&ipr_irq_desc);
+}
+
+static struct sh_machine_vector mv_polaris __initmv = {
+	.mv_name		= "Polaris",
+	.mv_init_irq		= init_polaris_irq,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/board-secureedge5410.c b/src/kernel/linux/v4.14/arch/sh/boards/board-secureedge5410.c
new file mode 100644
index 0000000..603a823
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/board-secureedge5410.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
+ * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
+ *
+ * Based on files with the following comments:
+ *
+ *           Copyright (C) 2000  Kazumoto Kojima
+ *
+ *           Modified for 7751 Solution Engine by
+ *           Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <asm/machvec.h>
+#include <mach/secureedge5410.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <cpu/timer.h>
+
+unsigned short secureedge5410_ioport;
+
+/*
+ * EraseConfig handling functions
+ */
+static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
+{
+	printk("SnapGear: erase switch interrupt!\n");
+
+	return IRQ_HANDLED;
+}
+
+static int __init eraseconfig_init(void)
+{
+	unsigned int irq = evt2irq(0x240);
+
+	printk("SnapGear: EraseConfig init\n");
+
+	/* Setup "EraseConfig" switch on external IRQ 0 */
+	if (request_irq(irq, eraseconfig_interrupt, 0, "Erase Config", NULL))
+		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
+				irq);
+	else
+		printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
+				irq);
+	return 0;
+}
+device_initcall(eraseconfig_init);
+
+/*
+ * Initialize IRQ setting
+ *
+ * IRL0 = erase switch
+ * IRL1 = eth0
+ * IRL2 = eth1
+ * IRL3 = crypto
+ */
+static void __init init_snapgear_IRQ(void)
+{
+	printk("Setup SnapGear IRQ/IPR ...\n");
+	/* enable individual interrupt mode for externals */
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_snapgear __initmv = {
+	.mv_name		= "SnapGear SecureEdge5410",
+	.mv_init_irq		= init_snapgear_IRQ,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/board-sh2007.c b/src/kernel/linux/v4.14/arch/sh/boards/board-sh2007.c
new file mode 100644
index 0000000..ef9c87d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/board-sh2007.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SH-2007 board support.
+ *
+ * Copyright (C) 2003, 2004  SUGIOKA Toshinobu
+ * Copyright (C) 2010  Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/io.h>
+#include <asm/machvec.h>
+#include <mach/sh2007.h>
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
+};
+
+struct smsc911x_platform_config smc911x_info = {
+	.flags		= SMSC911X_USE_32BIT,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct resource smsc9118_0_resources[] = {
+	[0] = {
+		.start	= SMC0_BASE,
+		.end	= SMC0_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x240),
+		.end	= evt2irq(0x240),
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource smsc9118_1_resources[] = {
+	[0] = {
+		.start	= SMC1_BASE,
+		.end	= SMC1_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x280),
+		.end	= evt2irq(0x280),
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device smsc9118_0_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smsc9118_0_resources),
+	.resource	= smsc9118_0_resources,
+	.dev = {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct platform_device smsc9118_1_device = {
+	.name		= "smsc911x",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(smsc9118_1_resources),
+	.resource	= smsc9118_1_resources,
+	.dev = {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct resource cf_resources[] = {
+	[0] = {
+		.start	= CF_BASE + CF_OFFSET,
+		.end	= CF_BASE + CF_OFFSET + 0x0f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= CF_BASE + CF_OFFSET + 0x206,
+		.end	= CF_BASE + CF_OFFSET + 0x20f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= evt2irq(0x2c0),
+		.end	= evt2irq(0x2c0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_device  = {
+	.name		= "pata_platform",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(cf_resources),
+	.resource	= cf_resources,
+};
+
+static struct platform_device *sh2007_devices[] __initdata = {
+	&smsc9118_0_device,
+	&smsc9118_1_device,
+	&cf_device,
+};
+
+static int __init sh2007_io_init(void)
+{
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices));
+	return 0;
+}
+subsys_initcall(sh2007_io_init);
+
+static void __init sh2007_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/*
+ * Initialize the board
+ */
+static void __init sh2007_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "SH-2007 Setup...");
+
+	/* setup wait control registers for area 5 */
+	__raw_writel(CS5BCR_D, CS5BCR);
+	__raw_writel(CS5WCR_D, CS5WCR);
+	__raw_writel(CS5PCR_D, CS5PCR);
+
+	printk(KERN_INFO " done.\n");
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_sh2007 __initmv = {
+	.mv_setup		= sh2007_setup,
+	.mv_name		= "sh2007",
+	.mv_init_irq		= sh2007_init_irq,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/board-sh7757lcr.c b/src/kernel/linux/v4.14/arch/sh/boards/board-sh7757lcr.c
new file mode 100644
index 0000000..0104c81
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/board-sh7757lcr.c
@@ -0,0 +1,611 @@
+/*
+ * Renesas R0P7757LC0012RL Support.
+ *
+ * Copyright (C) 2009 - 2010  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/io.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/sh_eth.h>
+#include <linux/sh_intc.h>
+#include <linux/usb/renesas_usbhs.h>
+#include <cpu/sh7757.h>
+#include <asm/heartbeat.h>
+
+static struct resource heartbeat_resource = {
+	.start	= 0xffec005c,	/* PUDR */
+	.end	= 0xffec005c,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.flags		= HEARTBEAT_INVERTED,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+/* Fast Ethernet */
+#define GBECONT		0xffc10100
+#define GBECONT_RMII1	BIT(17)
+#define GBECONT_RMII0	BIT(16)
+static void sh7757_eth_set_mdio_gate(void *addr)
+{
+	if (((unsigned long)addr & 0x00000fff) < 0x0800)
+		writel(readl(GBECONT) | GBECONT_RMII0, GBECONT);
+	else
+		writel(readl(GBECONT) | GBECONT_RMII1, GBECONT);
+}
+
+static struct resource sh_eth0_resources[] = {
+	{
+		.start  = 0xfef00000,
+		.end    = 0xfef001ff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = evt2irq(0xc80),
+		.end    = evt2irq(0xc80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7757_eth0_pdata = {
+	.phy = 1,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.set_mdio_gate = sh7757_eth_set_mdio_gate,
+};
+
+static struct platform_device sh7757_eth0_device = {
+	.name		= "sh7757-ether",
+	.resource	= sh_eth0_resources,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(sh_eth0_resources),
+	.dev		= {
+		.platform_data = &sh7757_eth0_pdata,
+	},
+};
+
+static struct resource sh_eth1_resources[] = {
+	{
+		.start  = 0xfef00800,
+		.end    = 0xfef009ff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = evt2irq(0xc80),
+		.end    = evt2irq(0xc80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7757_eth1_pdata = {
+	.phy = 1,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.set_mdio_gate = sh7757_eth_set_mdio_gate,
+};
+
+static struct platform_device sh7757_eth1_device = {
+	.name		= "sh7757-ether",
+	.resource	= sh_eth1_resources,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(sh_eth1_resources),
+	.dev		= {
+		.platform_data = &sh7757_eth1_pdata,
+	},
+};
+
+static void sh7757_eth_giga_set_mdio_gate(void *addr)
+{
+	if (((unsigned long)addr & 0x00000fff) < 0x0800) {
+		gpio_set_value(GPIO_PTT4, 1);
+		writel(readl(GBECONT) & ~GBECONT_RMII0, GBECONT);
+	} else {
+		gpio_set_value(GPIO_PTT4, 0);
+		writel(readl(GBECONT) & ~GBECONT_RMII1, GBECONT);
+	}
+}
+
+static struct resource sh_eth_giga0_resources[] = {
+	{
+		.start  = 0xfee00000,
+		.end    = 0xfee007ff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		/* TSU */
+		.start  = 0xfee01800,
+		.end    = 0xfee01fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = evt2irq(0x2960),
+		.end    = evt2irq(0x2960),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7757_eth_giga0_pdata = {
+	.phy = 18,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
+	.phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
+};
+
+static struct platform_device sh7757_eth_giga0_device = {
+	.name		= "sh7757-gether",
+	.resource	= sh_eth_giga0_resources,
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(sh_eth_giga0_resources),
+	.dev		= {
+		.platform_data = &sh7757_eth_giga0_pdata,
+	},
+};
+
+static struct resource sh_eth_giga1_resources[] = {
+	{
+		.start  = 0xfee00800,
+		.end    = 0xfee00fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		/* TSU */
+		.start  = 0xfee01800,
+		.end    = 0xfee01fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = evt2irq(0x2980),
+		.end    = evt2irq(0x2980),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7757_eth_giga1_pdata = {
+	.phy = 19,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
+	.phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
+};
+
+static struct platform_device sh7757_eth_giga1_device = {
+	.name		= "sh7757-gether",
+	.resource	= sh_eth_giga1_resources,
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(sh_eth_giga1_resources),
+	.dev		= {
+		.platform_data = &sh7757_eth_giga1_pdata,
+	},
+};
+
+/* Fixed 3.3V regulator to be used by SDHI0, MMCIF */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
+
+/* SH_MMCIF */
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.start	= 0xffcb0000,
+		.end	= 0xffcb00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x1c60),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= evt2irq(0x1c80),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.sup_pclk	= 0x0f,
+	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NONREMOVABLE,
+	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.platform_data		= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
+/* SDHI0 */
+static struct tmio_mmc_data sdhi_info = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI_RX,
+	.capabilities	= MMC_CAP_SD_HIGHSPEED,
+};
+
+static struct resource sdhi_resources[] = {
+	[0] = {
+		.start  = 0xffe50000,
+		.end    = 0xffe500ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x480),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi_resources),
+	.resource       = sdhi_resources,
+	.id             = 0,
+	.dev	= {
+		.platform_data	= &sdhi_info,
+	},
+};
+
+static int usbhs0_get_id(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+static struct renesas_usbhs_platform_info usb0_data = {
+	.platform_callback = {
+		.get_id = usbhs0_get_id,
+	},
+	.driver_param = {
+		.buswait_bwait = 5,
+	}
+};
+
+static struct resource usb0_resources[] = {
+	[0] = {
+		.start	= 0xfe450000,
+		.end	= 0xfe4501ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x840),
+		.end	= evt2irq(0x840),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb0_device = {
+	.name		= "renesas_usbhs",
+	.id		= 0,
+	.dev = {
+		.platform_data		= &usb0_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb0_resources),
+	.resource	= usb0_resources,
+};
+
+static struct platform_device *sh7757lcr_devices[] __initdata = {
+	&heartbeat_device,
+	&sh7757_eth0_device,
+	&sh7757_eth1_device,
+	&sh7757_eth_giga0_device,
+	&sh7757_eth_giga1_device,
+	&sh_mmcif_device,
+	&sdhi_device,
+	&usb0_device,
+};
+
+static struct flash_platform_data spi_flash_data = {
+	.name = "m25p80",
+	.type = "m25px64",
+};
+
+static struct spi_board_info spi_board_info[] = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 25000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &spi_flash_data,
+	},
+};
+
+static int __init sh7757lcr_devices_setup(void)
+{
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
+	/* RGMII (PTA) */
+	gpio_request(GPIO_FN_ET0_MDC, NULL);
+	gpio_request(GPIO_FN_ET0_MDIO, NULL);
+	gpio_request(GPIO_FN_ET1_MDC, NULL);
+	gpio_request(GPIO_FN_ET1_MDIO, NULL);
+
+	/* ONFI (PTB, PTZ) */
+	gpio_request(GPIO_FN_ON_NRE, NULL);
+	gpio_request(GPIO_FN_ON_NWE, NULL);
+	gpio_request(GPIO_FN_ON_NWP, NULL);
+	gpio_request(GPIO_FN_ON_NCE0, NULL);
+	gpio_request(GPIO_FN_ON_R_B0, NULL);
+	gpio_request(GPIO_FN_ON_ALE, NULL);
+	gpio_request(GPIO_FN_ON_CLE, NULL);
+
+	gpio_request(GPIO_FN_ON_DQ7, NULL);
+	gpio_request(GPIO_FN_ON_DQ6, NULL);
+	gpio_request(GPIO_FN_ON_DQ5, NULL);
+	gpio_request(GPIO_FN_ON_DQ4, NULL);
+	gpio_request(GPIO_FN_ON_DQ3, NULL);
+	gpio_request(GPIO_FN_ON_DQ2, NULL);
+	gpio_request(GPIO_FN_ON_DQ1, NULL);
+	gpio_request(GPIO_FN_ON_DQ0, NULL);
+
+	/* IRQ8 to 0 (PTB, PTC) */
+	gpio_request(GPIO_FN_IRQ8, NULL);
+	gpio_request(GPIO_FN_IRQ7, NULL);
+	gpio_request(GPIO_FN_IRQ6, NULL);
+	gpio_request(GPIO_FN_IRQ5, NULL);
+	gpio_request(GPIO_FN_IRQ4, NULL);
+	gpio_request(GPIO_FN_IRQ3, NULL);
+	gpio_request(GPIO_FN_IRQ2, NULL);
+	gpio_request(GPIO_FN_IRQ1, NULL);
+	gpio_request(GPIO_FN_IRQ0, NULL);
+
+	/* SPI0 (PTD) */
+	gpio_request(GPIO_FN_SP0_MOSI, NULL);
+	gpio_request(GPIO_FN_SP0_MISO, NULL);
+	gpio_request(GPIO_FN_SP0_SCK, NULL);
+	gpio_request(GPIO_FN_SP0_SCK_FB, NULL);
+	gpio_request(GPIO_FN_SP0_SS0, NULL);
+	gpio_request(GPIO_FN_SP0_SS1, NULL);
+	gpio_request(GPIO_FN_SP0_SS2, NULL);
+	gpio_request(GPIO_FN_SP0_SS3, NULL);
+
+	/* RMII 0/1 (PTE, PTF) */
+	gpio_request(GPIO_FN_RMII0_CRS_DV, NULL);
+	gpio_request(GPIO_FN_RMII0_TXD1, NULL);
+	gpio_request(GPIO_FN_RMII0_TXD0, NULL);
+	gpio_request(GPIO_FN_RMII0_TXEN, NULL);
+	gpio_request(GPIO_FN_RMII0_REFCLK, NULL);
+	gpio_request(GPIO_FN_RMII0_RXD1, NULL);
+	gpio_request(GPIO_FN_RMII0_RXD0, NULL);
+	gpio_request(GPIO_FN_RMII0_RX_ER, NULL);
+	gpio_request(GPIO_FN_RMII1_CRS_DV, NULL);
+	gpio_request(GPIO_FN_RMII1_TXD1, NULL);
+	gpio_request(GPIO_FN_RMII1_TXD0, NULL);
+	gpio_request(GPIO_FN_RMII1_TXEN, NULL);
+	gpio_request(GPIO_FN_RMII1_REFCLK, NULL);
+	gpio_request(GPIO_FN_RMII1_RXD1, NULL);
+	gpio_request(GPIO_FN_RMII1_RXD0, NULL);
+	gpio_request(GPIO_FN_RMII1_RX_ER, NULL);
+
+	/* eMMC (PTG) */
+	gpio_request(GPIO_FN_MMCCLK, NULL);
+	gpio_request(GPIO_FN_MMCCMD, NULL);
+	gpio_request(GPIO_FN_MMCDAT7, NULL);
+	gpio_request(GPIO_FN_MMCDAT6, NULL);
+	gpio_request(GPIO_FN_MMCDAT5, NULL);
+	gpio_request(GPIO_FN_MMCDAT4, NULL);
+	gpio_request(GPIO_FN_MMCDAT3, NULL);
+	gpio_request(GPIO_FN_MMCDAT2, NULL);
+	gpio_request(GPIO_FN_MMCDAT1, NULL);
+	gpio_request(GPIO_FN_MMCDAT0, NULL);
+
+	/* LPC (PTG, PTH, PTQ, PTU) */
+	gpio_request(GPIO_FN_SERIRQ, NULL);
+	gpio_request(GPIO_FN_LPCPD, NULL);
+	gpio_request(GPIO_FN_LDRQ, NULL);
+	gpio_request(GPIO_FN_WP, NULL);
+	gpio_request(GPIO_FN_FMS0, NULL);
+	gpio_request(GPIO_FN_LAD3, NULL);
+	gpio_request(GPIO_FN_LAD2, NULL);
+	gpio_request(GPIO_FN_LAD1, NULL);
+	gpio_request(GPIO_FN_LAD0, NULL);
+	gpio_request(GPIO_FN_LFRAME, NULL);
+	gpio_request(GPIO_FN_LRESET, NULL);
+	gpio_request(GPIO_FN_LCLK, NULL);
+	gpio_request(GPIO_FN_LGPIO7, NULL);
+	gpio_request(GPIO_FN_LGPIO6, NULL);
+	gpio_request(GPIO_FN_LGPIO5, NULL);
+	gpio_request(GPIO_FN_LGPIO4, NULL);
+
+	/* SPI1 (PTH) */
+	gpio_request(GPIO_FN_SP1_MOSI, NULL);
+	gpio_request(GPIO_FN_SP1_MISO, NULL);
+	gpio_request(GPIO_FN_SP1_SCK, NULL);
+	gpio_request(GPIO_FN_SP1_SCK_FB, NULL);
+	gpio_request(GPIO_FN_SP1_SS0, NULL);
+	gpio_request(GPIO_FN_SP1_SS1, NULL);
+
+	/* SDHI (PTI) */
+	gpio_request(GPIO_FN_SD_WP, NULL);
+	gpio_request(GPIO_FN_SD_CD, NULL);
+	gpio_request(GPIO_FN_SD_CLK, NULL);
+	gpio_request(GPIO_FN_SD_CMD, NULL);
+	gpio_request(GPIO_FN_SD_D3, NULL);
+	gpio_request(GPIO_FN_SD_D2, NULL);
+	gpio_request(GPIO_FN_SD_D1, NULL);
+	gpio_request(GPIO_FN_SD_D0, NULL);
+
+	/* SCIF3/4 (PTJ, PTW) */
+	gpio_request(GPIO_FN_RTS3, NULL);
+	gpio_request(GPIO_FN_CTS3, NULL);
+	gpio_request(GPIO_FN_TXD3, NULL);
+	gpio_request(GPIO_FN_RXD3, NULL);
+	gpio_request(GPIO_FN_RTS4, NULL);
+	gpio_request(GPIO_FN_RXD4, NULL);
+	gpio_request(GPIO_FN_TXD4, NULL);
+	gpio_request(GPIO_FN_CTS4, NULL);
+
+	/* SERMUX (PTK, PTL, PTO, PTV) */
+	gpio_request(GPIO_FN_COM2_TXD, NULL);
+	gpio_request(GPIO_FN_COM2_RXD, NULL);
+	gpio_request(GPIO_FN_COM2_RTS, NULL);
+	gpio_request(GPIO_FN_COM2_CTS, NULL);
+	gpio_request(GPIO_FN_COM2_DTR, NULL);
+	gpio_request(GPIO_FN_COM2_DSR, NULL);
+	gpio_request(GPIO_FN_COM2_DCD, NULL);
+	gpio_request(GPIO_FN_COM2_RI, NULL);
+	gpio_request(GPIO_FN_RAC_RXD, NULL);
+	gpio_request(GPIO_FN_RAC_RTS, NULL);
+	gpio_request(GPIO_FN_RAC_CTS, NULL);
+	gpio_request(GPIO_FN_RAC_DTR, NULL);
+	gpio_request(GPIO_FN_RAC_DSR, NULL);
+	gpio_request(GPIO_FN_RAC_DCD, NULL);
+	gpio_request(GPIO_FN_RAC_TXD, NULL);
+	gpio_request(GPIO_FN_COM1_TXD, NULL);
+	gpio_request(GPIO_FN_COM1_RXD, NULL);
+	gpio_request(GPIO_FN_COM1_RTS, NULL);
+	gpio_request(GPIO_FN_COM1_CTS, NULL);
+
+	writeb(0x10, 0xfe470000);	/* SMR0: SerMux mode 0 */
+
+	/* IIC (PTM, PTR, PTS) */
+	gpio_request(GPIO_FN_SDA7, NULL);
+	gpio_request(GPIO_FN_SCL7, NULL);
+	gpio_request(GPIO_FN_SDA6, NULL);
+	gpio_request(GPIO_FN_SCL6, NULL);
+	gpio_request(GPIO_FN_SDA5, NULL);
+	gpio_request(GPIO_FN_SCL5, NULL);
+	gpio_request(GPIO_FN_SDA4, NULL);
+	gpio_request(GPIO_FN_SCL4, NULL);
+	gpio_request(GPIO_FN_SDA3, NULL);
+	gpio_request(GPIO_FN_SCL3, NULL);
+	gpio_request(GPIO_FN_SDA2, NULL);
+	gpio_request(GPIO_FN_SCL2, NULL);
+	gpio_request(GPIO_FN_SDA1, NULL);
+	gpio_request(GPIO_FN_SCL1, NULL);
+	gpio_request(GPIO_FN_SDA0, NULL);
+	gpio_request(GPIO_FN_SCL0, NULL);
+
+	/* USB (PTN) */
+	gpio_request(GPIO_FN_VBUS_EN, NULL);
+	gpio_request(GPIO_FN_VBUS_OC, NULL);
+
+	/* SGPIO1/0 (PTN, PTO) */
+	gpio_request(GPIO_FN_SGPIO1_CLK, NULL);
+	gpio_request(GPIO_FN_SGPIO1_LOAD, NULL);
+	gpio_request(GPIO_FN_SGPIO1_DI, NULL);
+	gpio_request(GPIO_FN_SGPIO1_DO, NULL);
+	gpio_request(GPIO_FN_SGPIO0_CLK, NULL);
+	gpio_request(GPIO_FN_SGPIO0_LOAD, NULL);
+	gpio_request(GPIO_FN_SGPIO0_DI, NULL);
+	gpio_request(GPIO_FN_SGPIO0_DO, NULL);
+
+	/* WDT (PTN) */
+	gpio_request(GPIO_FN_SUB_CLKIN, NULL);
+
+	/* System (PTT) */
+	gpio_request(GPIO_FN_STATUS1, NULL);
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* PWMX (PTT) */
+	gpio_request(GPIO_FN_PWMX1, NULL);
+	gpio_request(GPIO_FN_PWMX0, NULL);
+
+	/* R-SPI (PTV) */
+	gpio_request(GPIO_FN_R_SPI_MOSI, NULL);
+	gpio_request(GPIO_FN_R_SPI_MISO, NULL);
+	gpio_request(GPIO_FN_R_SPI_RSPCK, NULL);
+	gpio_request(GPIO_FN_R_SPI_SSL0, NULL);
+	gpio_request(GPIO_FN_R_SPI_SSL1, NULL);
+
+	/* EVC (PTV, PTW) */
+	gpio_request(GPIO_FN_EVENT7, NULL);
+	gpio_request(GPIO_FN_EVENT6, NULL);
+	gpio_request(GPIO_FN_EVENT5, NULL);
+	gpio_request(GPIO_FN_EVENT4, NULL);
+	gpio_request(GPIO_FN_EVENT3, NULL);
+	gpio_request(GPIO_FN_EVENT2, NULL);
+	gpio_request(GPIO_FN_EVENT1, NULL);
+	gpio_request(GPIO_FN_EVENT0, NULL);
+
+	/* LED for heartbeat */
+	gpio_request(GPIO_PTU3, NULL);
+	gpio_direction_output(GPIO_PTU3, 1);
+	gpio_request(GPIO_PTU2, NULL);
+	gpio_direction_output(GPIO_PTU2, 1);
+	gpio_request(GPIO_PTU1, NULL);
+	gpio_direction_output(GPIO_PTU1, 1);
+	gpio_request(GPIO_PTU0, NULL);
+	gpio_direction_output(GPIO_PTU0, 1);
+
+	/* control for MDIO of Gigabit Ethernet */
+	gpio_request(GPIO_PTT4, NULL);
+	gpio_direction_output(GPIO_PTT4, 1);
+
+	/* control for eMMC */
+	gpio_request(GPIO_PTT7, NULL);		/* eMMC_RST# */
+	gpio_direction_output(GPIO_PTT7, 0);
+	gpio_request(GPIO_PTT6, NULL);		/* eMMC_INDEX# */
+	gpio_direction_output(GPIO_PTT6, 0);
+	gpio_request(GPIO_PTT5, NULL);		/* eMMC_PRST# */
+	gpio_direction_output(GPIO_PTT5, 1);
+
+	/* register SPI device information */
+	spi_register_board_info(spi_board_info,
+				ARRAY_SIZE(spi_board_info));
+
+	/* General platform */
+	return platform_add_devices(sh7757lcr_devices,
+				    ARRAY_SIZE(sh7757lcr_devices));
+}
+arch_initcall(sh7757lcr_devices_setup);
+
+/* Initialize IRQ setting */
+void __init init_sh7757lcr_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+/* Initialize the board */
+static void __init sh7757lcr_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "Renesas R0P7757LC0012RL support.\n");
+}
+
+static int sh7757lcr_mode_pins(void)
+{
+	int value = 0;
+
+	/* These are the factory default settings of S3 (Low active).
+	 * If you change these dip switches then you will need to
+	 * adjust the values below as well.
+	 */
+	value |= MODE_PIN0;	/* Clock Mode: 1 */
+
+	return value;
+}
+
+/* The Machine Vector */
+static struct sh_machine_vector mv_sh7757lcr __initmv = {
+	.mv_name		= "SH7757LCR",
+	.mv_setup		= sh7757lcr_setup,
+	.mv_init_irq		= init_sh7757lcr_IRQ,
+	.mv_mode_pins		= sh7757lcr_mode_pins,
+};
+
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/board-sh7785lcr.c b/src/kernel/linux/v4.14/arch/sh/boards/board-sh7785lcr.c
new file mode 100644
index 0000000..2c4771e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/board-sh7785lcr.c
@@ -0,0 +1,378 @@
+/*
+ * Renesas Technology Corp. R0P7785LC0011RL Support.
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ * Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+#include <linux/fb.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/i2c-algo-pca.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/sh_intc.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <mach/sh7785lcr.h>
+#include <cpu/sh7785.h>
+#include <asm/heartbeat.h>
+#include <asm/clock.h>
+#include <asm/bl_bit.h>
+
+/*
+ * NOTE: This board has 2 physical memory maps.
+ *	 Please look at include/asm-sh/sh7785lcr.h or hardware manual.
+ */
+static struct resource heartbeat_resource = {
+	.start	= PLD_LEDCR,
+	.end	= PLD_LEDCR,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 4,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= NOR_FLASH_ADDR,
+		.end	= NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct r8a66597_platdata r8a66597_data = {
+	.xtal = R8A66597_PLATDATA_XTAL_12MHZ,
+	.vif = 1,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.start	= R8A66597_ADDR,
+		.end	= R8A66597_ADDR + R8A66597_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x240),
+		.end	= evt2irq(0x240),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct resource sm501_resources[] = {
+	[0]	= {
+		.start	= SM107_MEM_ADDR,
+		.end	= SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= SM107_REG_ADDR,
+		.end	= SM107_REG_ADDR + SM107_REG_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2]	= {
+		.start	= evt2irq(0x340),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct fb_videomode sm501_default_mode_crt = {
+	.pixclock	= 35714,	/* 28MHz */
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 105,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 39,
+	.vsync_len	= 2,
+	.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct fb_videomode sm501_default_mode_pnl = {
+	.pixclock	= 40000,	/* 25MHz */
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 2,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 39,
+	.vsync_len	= 2,
+	.sync		= 0,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode_pnl,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT |
+			  SM501FB_FLAG_PANEL_NO_VBIASEN,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode_crt,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT,
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+	.fb_route	= SM501_FB_OWN,
+	.fb_crt		= &sm501_pdata_fbsub_crt,
+	.fb_pnl		= &sm501_pdata_fbsub_pnl,
+};
+
+static struct sm501_initdata sm501_initdata = {
+	.gpio_high	= {
+		.set	= 0x00001fe0,
+		.mask	= 0x0,
+	},
+	.devices	= 0,
+	.mclk		= 84 * 1000000,
+	.m1xclk		= 112 * 1000000,
+};
+
+static struct sm501_platdata sm501_platform_data = {
+	.init		= &sm501_initdata,
+	.fb		= &sm501_fb_pdata,
+};
+
+static struct platform_device sm501_device = {
+	.name		= "sm501",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &sm501_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(sm501_resources),
+	.resource	= sm501_resources,
+};
+
+static struct resource i2c_proto_resources[] = {
+	[0] = {
+		.start	= PCA9564_PROTO_32BIT_ADDR,
+		.end	= PCA9564_PROTO_32BIT_ADDR + PCA9564_SIZE - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	[1] = {
+		.start	= evt2irq(0x380),
+		.end	= evt2irq(0x380),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource i2c_resources[] = {
+	[0] = {
+		.start	= PCA9564_ADDR,
+		.end	= PCA9564_ADDR + PCA9564_SIZE - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	[1] = {
+		.start	= evt2irq(0x380),
+		.end	= evt2irq(0x380),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
+	.gpio			= 0,
+	.i2c_clock_speed	= I2C_PCA_CON_330kHz,
+	.timeout		= HZ,
+};
+
+static struct platform_device i2c_device = {
+	.name		= "i2c-pca-platform",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &i2c_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(i2c_resources),
+	.resource	= i2c_resources,
+};
+
+static struct platform_device *sh7785lcr_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&r8a66597_usb_host_device,
+	&sm501_device,
+	&i2c_device,
+};
+
+static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+};
+
+static int __init sh7785lcr_devices_setup(void)
+{
+	i2c_register_board_info(0, sh7785lcr_i2c_devices,
+				ARRAY_SIZE(sh7785lcr_i2c_devices));
+
+	if (mach_is_sh7785lcr_pt()) {
+		i2c_device.resource = i2c_proto_resources;
+		i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources);
+	}
+
+	return platform_add_devices(sh7785lcr_devices,
+				    ARRAY_SIZE(sh7785lcr_devices));
+}
+device_initcall(sh7785lcr_devices_setup);
+
+/* Initialize IRQ setting */
+void __init init_sh7785lcr_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+static int sh7785lcr_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(NULL, "extal");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333333);
+	clk_put(clk);
+
+	return ret;
+}
+
+static void sh7785lcr_power_off(void)
+{
+	unsigned char *p;
+
+	p = ioremap(PLD_POFCR, PLD_POFCR + 1);
+	if (!p) {
+		printk(KERN_ERR "%s: ioremap error.\n", __func__);
+		return;
+	}
+	*p = 0x01;
+	iounmap(p);
+	set_bl_bit();
+	while (1)
+		cpu_relax();
+}
+
+/* Initialize the board */
+static void __init sh7785lcr_setup(char **cmdline_p)
+{
+	void __iomem *sm501_reg;
+
+	printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
+
+	pm_power_off = sh7785lcr_power_off;
+
+	/* sm501 DRAM configuration */
+	sm501_reg = ioremap_nocache(SM107_REG_ADDR, SM501_DRAM_CONTROL);
+	if (!sm501_reg) {
+		printk(KERN_ERR "%s: ioremap error.\n", __func__);
+		return;
+	}
+
+	writel(0x000307c2, sm501_reg + SM501_DRAM_CONTROL);
+	iounmap(sm501_reg);
+}
+
+/* Return the board specific boot mode pin configuration */
+static int sh7785lcr_mode_pins(void)
+{
+	int value = 0;
+
+	/* These are the factory default settings of S1 and S2.
+	 * If you change these dip switches then you will need to
+	 * adjust the values below as well.
+	 */
+	value |= MODE_PIN4; /* Clock Mode 16 */
+	value |= MODE_PIN5; /* 32-bit Area0 bus width */
+	value |= MODE_PIN6; /* 32-bit Area0 bus width */
+	value |= MODE_PIN7; /* Area 0 SRAM interface [fixed] */
+	value |= MODE_PIN8; /* Little Endian */
+	value |= MODE_PIN9; /* Master Mode */
+	value |= MODE_PIN14; /* No PLL step-up */
+
+	return value;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sh7785lcr __initmv = {
+	.mv_name		= "SH7785LCR",
+	.mv_setup		= sh7785lcr_setup,
+	.mv_clk_init		= sh7785lcr_clk_init,
+	.mv_init_irq		= init_sh7785lcr_IRQ,
+	.mv_mode_pins		= sh7785lcr_mode_pins,
+};
+
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/board-shmin.c b/src/kernel/linux/v4.14/arch/sh/boards/board-shmin.c
new file mode 100644
index 0000000..83296c0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/board-shmin.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/boards/shmin/setup.c
+ *
+ * Copyright (C) 2006 Takashi YOSHII
+ *
+ * SHMIN Support.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/machvec.h>
+#include <mach/shmin.h>
+#include <asm/clock.h>
+#include <asm/io.h>
+
+#define PFC_PHCR	0xa400010eUL
+#define INTC_ICR1	0xa4000010UL
+
+static void __init init_shmin_irq(void)
+{
+	__raw_writew(0x2a00, PFC_PHCR);	// IRQ0-3=IRQ
+	__raw_writew(0x0aaa, INTC_ICR1);	// IRQ0-3=IRQ-mode,Low-active.
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+static void __init shmin_setup(char **cmdline_p)
+{
+	__set_io_port_base(SHMIN_IO_BASE);
+}
+
+static struct sh_machine_vector mv_shmin __initmv = {
+	.mv_name	= "SHMIN",
+	.mv_setup	= shmin_setup,
+	.mv_init_irq	= init_shmin_irq,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/board-titan.c b/src/kernel/linux/v4.14/arch/sh/boards/board-titan.c
new file mode 100644
index 0000000..94c36c7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/board-titan.c
@@ -0,0 +1,24 @@
+/*
+ * arch/sh/boards/titan/setup.c - Setup for Titan
+ *
+ *  Copyright (C) 2006  Jamie Lenehan
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <mach/titan.h>
+#include <asm/io.h>
+
+static void __init init_titan_irq(void)
+{
+	/* enable individual interrupt mode for externals */
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+static struct sh_machine_vector mv_titan __initmv = {
+	.mv_name	= "Titan",
+	.mv_init_irq	= init_titan_irq,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/board-urquell.c b/src/kernel/linux/v4.14/arch/sh/boards/board-urquell.c
new file mode 100644
index 0000000..b52abcc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/board-urquell.c
@@ -0,0 +1,221 @@
+/*
+ * Renesas Technology Corp. SH7786 Urquell Support.
+ *
+ * Copyright (C) 2008  Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ * Copyright (C) 2009, 2010  Paul Mundt
+ *
+ * Based on board-sh7785lcr.c
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/smc91x.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/sh_intc.h>
+#include <mach/urquell.h>
+#include <cpu/sh7786.h>
+#include <asm/heartbeat.h>
+#include <asm/sizes.h>
+#include <asm/smp-ops.h>
+
+/*
+ * bit  1234 5678
+ *----------------------------
+ * SW1  0101 0010  -> Pck 33MHz version
+ *     (1101 0010)    Pck 66MHz version
+ * SW2  0x1x xxxx  -> little endian
+ *                    29bit mode
+ * SW47 0001 1000  -> CS0 : on-board flash
+ *                    CS1 : SRAM, registers, LAN, PCMCIA
+ *                    38400 bps for SCIF1
+ *
+ * Address
+ * 0x00000000 - 0x04000000  (CS0)     Nor Flash
+ * 0x04000000 - 0x04200000  (CS1)     SRAM
+ * 0x05000000 - 0x05800000  (CS1)     on board register
+ * 0x05800000 - 0x06000000  (CS1)     LAN91C111
+ * 0x06000000 - 0x06400000  (CS1)     PCMCIA
+ * 0x08000000 - 0x10000000  (CS2-CS3) DDR3
+ * 0x10000000 - 0x14000000  (CS4)     PCIe
+ * 0x14000000 - 0x14800000  (CS5)     Core0 LRAM/URAM
+ * 0x14800000 - 0x15000000  (CS5)     Core1 LRAM/URAM
+ * 0x18000000 - 0x1C000000  (CS6)     ATA/NAND-Flash
+ * 0x1C000000 -             (CS7)     SH7786 Control register
+ */
+
+/* HeartBeat */
+static struct resource heartbeat_resource = {
+	.start	= BOARDREG(SLEDR),
+	.end	= BOARDREG(SLEDR),
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+/* LAN91C111 */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "SMC91C111" ,
+		.start  = 0x05800300,
+		.end    = 0x0580030f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x360),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+/* Nor Flash */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= SZ_512K,
+		.mask_flags	= MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512K,
+		.mask_flags	= MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.start	= NOR_FLASH_ADDR,
+		.end	= NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct platform_device *urquell_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+	&nor_flash_device,
+};
+
+static int __init urquell_devices_setup(void)
+{
+	/* USB */
+	gpio_request(GPIO_FN_USB_OVC0,  NULL);
+	gpio_request(GPIO_FN_USB_PENC0, NULL);
+
+	/* enable LAN */
+	__raw_writew(__raw_readw(UBOARDREG(IRL2MSKR)) & ~0x00000001,
+		  UBOARDREG(IRL2MSKR));
+
+	return platform_add_devices(urquell_devices,
+				    ARRAY_SIZE(urquell_devices));
+}
+device_initcall(urquell_devices_setup);
+
+static void urquell_power_off(void)
+{
+	__raw_writew(0xa5a5, UBOARDREG(SRSTR));
+}
+
+static void __init urquell_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
+}
+
+static int urquell_mode_pins(void)
+{
+	return __raw_readw(UBOARDREG(MDSWMR));
+}
+
+static int urquell_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	/*
+	 * Only handle the EXTAL case, anyone interfacing a crystal
+	 * resonator will need to provide their own input clock.
+	 */
+	if (test_mode_pin(MODE_PIN9))
+		return -EINVAL;
+
+	clk = clk_get(NULL, "extal");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333333);
+	clk_put(clk);
+
+	return ret;
+}
+
+/* Initialize the board */
+static void __init urquell_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n");
+
+	pm_power_off = urquell_power_off;
+
+	register_smp_ops(&shx3_smp_ops);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_urquell __initmv = {
+	.mv_name	= "Urquell",
+	.mv_setup	= urquell_setup,
+	.mv_init_irq	= urquell_init_irq,
+	.mv_mode_pins	= urquell_mode_pins,
+	.mv_clk_init	= urquell_clk_init,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-ap325rxa/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-ap325rxa/Makefile
new file mode 100644
index 0000000..4cf1774
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-ap325rxa/Makefile
@@ -0,0 +1,2 @@
+obj-y	 := setup.o sdram.o
+
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-ap325rxa/sdram.S b/src/kernel/linux/v4.14/arch/sh/boards/mach-ap325rxa/sdram.S
new file mode 100644
index 0000000..db24fbe
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-ap325rxa/sdram.S
@@ -0,0 +1,69 @@
+/*
+ * AP325RXA sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(ap325rxa_sdram_enter_start)
+
+	/* SBSC: disable power down and put in self-refresh mode */
+	mov.l	1f, r4
+	mov.l	2f, r1
+	mov.l	@r4, r2
+	or	r1, r2
+	mov.l   3f, r3
+	and	r3, r2
+	mov.l	r2, @r4
+
+	rts
+	 nop
+
+	.balign 4
+1:	.long	0xfe400008 /* SDCR0 */
+2:	.long	0x00000400
+3:	.long	0xffff7fff
+ENTRY(ap325rxa_sdram_enter_end)
+
+	.balign 4
+ENTRY(ap325rxa_sdram_leave_start)
+
+	/* SBSC: set auto-refresh mode */
+	mov.l	1f, r4
+	mov.l	@r4, r0
+	mov.l   4f, r1
+	and	r1, r0
+	mov.l	r0, @r4
+	mov.l	6f, r4
+	mov.l	8f, r0
+	mov.l	@r4, r1
+	mov	#-1, r4
+	add	r4, r1
+	or	r1, r0
+	mov.l	7f, r1
+	mov.l	r0, @r1
+
+	rts
+	 nop
+
+	.balign 4
+1:	.long	0xfe400008 /* SDCR0 */
+4:	.long	0xfffffbff
+6:	.long   0xfe40001c /* RTCOR */
+7:	.long   0xfe400018 /* RTCNT */
+8:	.long   0xa55a0000
+ENTRY(ap325rxa_sdram_leave_end)
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-ap325rxa/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-ap325rxa/setup.c
new file mode 100644
index 0000000..de8393c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-ap325rxa/setup.c
@@ -0,0 +1,695 @@
+/*
+ * Renesas - AP-325RXA
+ * (Compatible with Algo System ., LTD. - AP-320A)
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Author : Yusuke Goda <goda.yuske@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/sh_flctl.h>
+#include <linux/mfd/tmio.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <linux/videodev2.h>
+#include <linux/sh_intc.h>
+#include <media/i2c/ov772x.h>
+#include <media/soc_camera.h>
+#include <linux/platform_data/media/soc_camera_platform.h>
+#include <media/drv-intf/sh_mobile_ceu.h>
+#include <video/sh_mobile_lcdc.h>
+#include <asm/io.h>
+#include <asm/clock.h>
+#include <asm/suspend.h>
+#include <cpu/sh7723.h>
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+};
+
+static struct resource smsc9118_resources[] = {
+	[0] = {
+		.start	= 0xb6080000,
+		.end	= 0xb60fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x660),
+		.end	= evt2irq(0x660),
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device smsc9118_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc9118_resources),
+	.resource	= smsc9118_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+/*
+ * AP320 and AP325RXA has CPLD data in NOR Flash(0xA80000-0xABFFFF).
+ * If this area erased, this board can not boot.
+ */
+static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = (1 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (2 * 1024 * 1024),
+	}, {
+		.name = "free-area0",
+		.offset = MTDPART_OFS_APPEND,
+		.size = ((7 * 1024 * 1024) + (512 * 1024)),
+	}, {
+		.name = "CPLD-Data",
+		.offset = MTDPART_OFS_APPEND,
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+		.size = (1024 * 128 * 2),
+	}, {
+		.name = "free-area1",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data ap325rxa_nor_flash_data = {
+	.width		= 2,
+	.parts		= ap325rxa_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(ap325rxa_nor_flash_partitions),
+};
+
+static struct resource ap325rxa_nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x00ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device ap325rxa_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= ap325rxa_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(ap325rxa_nor_flash_resources),
+	.dev		= {
+		.platform_data = &ap325rxa_nor_flash_data,
+	},
+};
+
+static struct mtd_partition nand_partition_info[] = {
+	{
+		.name	= "nand_data",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct resource nand_flash_resources[] = {
+	[0] = {
+		.start	= 0xa4530000,
+		.end	= 0xa45300ff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct sh_flctl_platform_data nand_flash_data = {
+	.parts		= nand_partition_info,
+	.nr_parts	= ARRAY_SIZE(nand_partition_info),
+	.flcmncr_val	= FCKSEL_E | TYPESEL_SET | NANWF_E,
+	.has_hwecc	= 1,
+};
+
+static struct platform_device nand_flash_device = {
+	.name		= "sh_flctl",
+	.resource	= nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(nand_flash_resources),
+	.dev		= {
+		.platform_data = &nand_flash_data,
+	},
+};
+
+#define FPGA_LCDREG	0xB4100180
+#define FPGA_BKLREG	0xB4100212
+#define FPGA_LCDREG_VAL	0x0018
+#define PORT_MSELCRB	0xA4050182
+#define PORT_HIZCRC	0xA405015C
+#define PORT_DRVCRA	0xA405018A
+#define PORT_DRVCRB	0xA405018C
+
+static int ap320_wvga_set_brightness(int brightness)
+{
+	if (brightness) {
+		gpio_set_value(GPIO_PTS3, 0);
+		__raw_writew(0x100, FPGA_BKLREG);
+	} else {
+		__raw_writew(0, FPGA_BKLREG);
+		gpio_set_value(GPIO_PTS3, 1);
+	}
+
+	return 0;
+}
+
+static void ap320_wvga_power_on(void)
+{
+	msleep(100);
+
+	/* ASD AP-320/325 LCD ON */
+	__raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG);
+}
+
+static void ap320_wvga_power_off(void)
+{
+	/* ASD AP-320/325 LCD OFF */
+	__raw_writew(0, FPGA_LCDREG);
+}
+
+static const struct fb_videomode ap325rxa_lcdc_modes[] = {
+	{
+		.name = "LB070WV1",
+		.xres = 800,
+		.yres = 480,
+		.left_margin = 32,
+		.right_margin = 160,
+		.hsync_len = 8,
+		.upper_margin = 63,
+		.lower_margin = 80,
+		.vsync_len = 1,
+		.sync = 0, /* hsync and vsync are active low */
+	},
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_EXTERNAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.interface_type = RGB18,
+		.clock_divider = 1,
+		.lcd_modes = ap325rxa_lcdc_modes,
+		.num_modes = ARRAY_SIZE(ap325rxa_lcdc_modes),
+		.panel_cfg = {
+			.width = 152,	/* 7.0 inch */
+			.height = 91,
+			.display_on = ap320_wvga_power_on,
+			.display_off = ap320_wvga_power_off,
+		},
+		.bl_info = {
+			.name = "sh_mobile_lcdc_bl",
+			.max_brightness = 1,
+			.set_brightness = ap320_wvga_set_brightness,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+};
+
+static void camera_power(int val)
+{
+	gpio_set_value(GPIO_PTZ5, val); /* RST_CAM/RSTB */
+	mdelay(10);
+}
+
+#ifdef CONFIG_I2C
+/* support for the old ncm03j camera */
+static unsigned char camera_ncm03j_magic[] =
+{
+	0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
+	0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36,
+	0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F,
+	0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55,
+	0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12,
+	0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0,
+	0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F,
+	0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A,
+	0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A,
+	0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A,
+	0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56,
+	0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37,
+	0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A,
+	0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56,
+	0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC,
+	0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
+};
+
+static int camera_probe(void)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int ret;
+
+	if (!a)
+		return -ENODEV;
+
+	camera_power(1);
+	msg.addr = 0x6e;
+	msg.buf = camera_ncm03j_magic;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	camera_power(0);
+
+	return ret;
+}
+
+static int camera_set_capture(struct soc_camera_platform_info *info,
+			      int enable)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int ret = 0;
+	int i;
+
+	camera_power(0);
+	if (!enable)
+		return 0; /* no disable for now */
+
+	camera_power(1);
+	for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
+		u_int8_t buf[8];
+
+		msg.addr = 0x6e;
+		msg.buf = buf;
+		msg.len = 2;
+		msg.flags = 0;
+
+		buf[0] = camera_ncm03j_magic[i];
+		buf[1] = camera_ncm03j_magic[i + 1];
+
+		ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+	}
+
+	return ret;
+}
+
+static int ap325rxa_camera_add(struct soc_camera_device *icd);
+static void ap325rxa_camera_del(struct soc_camera_device *icd);
+
+static struct soc_camera_platform_info camera_info = {
+	.format_name = "UYVY",
+	.format_depth = 16,
+	.format = {
+		.code = MEDIA_BUS_FMT_UYVY8_2X8,
+		.colorspace = V4L2_COLORSPACE_SMPTE170M,
+		.field = V4L2_FIELD_NONE,
+		.width = 640,
+		.height = 480,
+	},
+	.mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+	V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+	V4L2_MBUS_DATA_ACTIVE_HIGH,
+	.mbus_type = V4L2_MBUS_PARALLEL,
+	.set_capture = camera_set_capture,
+};
+
+static struct soc_camera_link camera_link = {
+	.bus_id		= 0,
+	.add_device	= ap325rxa_camera_add,
+	.del_device	= ap325rxa_camera_del,
+	.module_name	= "soc_camera_platform",
+	.priv		= &camera_info,
+};
+
+static struct platform_device *camera_device;
+
+static void ap325rxa_camera_release(struct device *dev)
+{
+	soc_camera_platform_release(&camera_device);
+}
+
+static int ap325rxa_camera_add(struct soc_camera_device *icd)
+{
+	int ret = soc_camera_platform_add(icd, &camera_device, &camera_link,
+					  ap325rxa_camera_release, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = camera_probe();
+	if (ret < 0)
+		soc_camera_platform_del(icd, camera_device, &camera_link);
+
+	return ret;
+}
+
+static void ap325rxa_camera_del(struct soc_camera_device *icd)
+{
+	soc_camera_platform_del(icd, camera_device, &camera_link);
+}
+#endif /* CONFIG_I2C */
+
+static int ov7725_power(struct device *dev, int mode)
+{
+	camera_power(0);
+	if (mode)
+		camera_power(1);
+
+	return 0;
+}
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x880),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(ceu_resources),
+	.resource	= ceu_resources,
+	.dev		= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
+/* Fixed 3.3V regulators to be used by SDHI0, SDHI1 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
+static struct resource sdhi0_cn3_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start	= 0x04ce0000,
+		.end	= 0x04ce00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xe80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct tmio_mmc_data sdhi0_cn3_data = {
+	.capabilities	= MMC_CAP_SDIO_IRQ,
+};
+
+static struct platform_device sdhi0_cn3_device = {
+	.name		= "sh_mobile_sdhi",
+	.id             = 0, /* "sdhi0" clock */
+	.num_resources	= ARRAY_SIZE(sdhi0_cn3_resources),
+	.resource	= sdhi0_cn3_resources,
+	.dev = {
+		.platform_data = &sdhi0_cn3_data,
+	},
+};
+
+static struct resource sdhi1_cn7_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start	= 0x04cf0000,
+		.end	= 0x04cf00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x4e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct tmio_mmc_data sdhi1_cn7_data = {
+	.capabilities	= MMC_CAP_SDIO_IRQ,
+};
+
+static struct platform_device sdhi1_cn7_device = {
+	.name		= "sh_mobile_sdhi",
+	.id             = 1, /* "sdhi1" clock */
+	.num_resources	= ARRAY_SIZE(sdhi1_cn7_resources),
+	.resource	= sdhi1_cn7_resources,
+	.dev = {
+		.platform_data = &sdhi1_cn7_data,
+	},
+};
+
+static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+static struct i2c_board_info ap325rxa_i2c_camera[] = {
+	{
+		I2C_BOARD_INFO("ov772x", 0x21),
+	},
+};
+
+static struct ov772x_camera_info ov7725_info = {
+	.flags		= OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
+	.edgectrl	= OV772X_AUTO_EDGECTRL(0xf, 0),
+};
+
+static struct soc_camera_link ov7725_link = {
+	.bus_id		= 0,
+	.power		= ov7725_power,
+	.board_info	= &ap325rxa_i2c_camera[0],
+	.i2c_adapter_id	= 0,
+	.priv		= &ov7725_info,
+};
+
+static struct platform_device ap325rxa_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &ov7725_link,
+		},
+	}, {
+		.name	= "soc-camera-pdrv",
+		.id	= 1,
+		.dev	= {
+			.platform_data = &camera_link,
+		},
+	},
+};
+
+static struct platform_device *ap325rxa_devices[] __initdata = {
+	&smsc9118_device,
+	&ap325rxa_nor_flash_device,
+	&lcdc_device,
+	&ceu_device,
+	&nand_flash_device,
+	&sdhi0_cn3_device,
+	&sdhi1_cn7_device,
+	&ap325rxa_camera[0],
+	&ap325rxa_camera[1],
+};
+
+extern char ap325rxa_sdram_enter_start;
+extern char ap325rxa_sdram_enter_end;
+extern char ap325rxa_sdram_leave_start;
+extern char ap325rxa_sdram_leave_end;
+
+static int __init ap325rxa_devices_setup(void)
+{
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+					&ap325rxa_sdram_enter_start,
+					&ap325rxa_sdram_enter_end,
+					&ap325rxa_sdram_leave_start,
+					&ap325rxa_sdram_leave_end);
+
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+	regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	/* LD3 and LD4 LEDs */
+	gpio_request(GPIO_PTX5, NULL); /* RUN */
+	gpio_direction_output(GPIO_PTX5, 1);
+	gpio_export(GPIO_PTX5, 0);
+
+	gpio_request(GPIO_PTX4, NULL); /* INDICATOR */
+	gpio_direction_output(GPIO_PTX4, 0);
+	gpio_export(GPIO_PTX4, 0);
+
+	/* SW1 input */
+	gpio_request(GPIO_PTF7, NULL); /* MODE */
+	gpio_direction_input(GPIO_PTF7);
+	gpio_export(GPIO_PTF7, 0);
+
+	/* LCDC */
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD9, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDD0, NULL);
+	gpio_request(GPIO_FN_LCDLCLK_PTR, NULL);
+	gpio_request(GPIO_FN_LCDDCK, NULL);
+	gpio_request(GPIO_FN_LCDVEPWC, NULL);
+	gpio_request(GPIO_FN_LCDVCPWC, NULL);
+	gpio_request(GPIO_FN_LCDVSYN, NULL);
+	gpio_request(GPIO_FN_LCDHSYN, NULL);
+	gpio_request(GPIO_FN_LCDDISP, NULL);
+	gpio_request(GPIO_FN_LCDDON, NULL);
+
+	/* LCD backlight */
+	gpio_request(GPIO_PTS3, NULL);
+	gpio_direction_output(GPIO_PTS3, 1);
+
+	/* CEU */
+	gpio_request(GPIO_FN_VIO_CLK2, NULL);
+	gpio_request(GPIO_FN_VIO_VD2, NULL);
+	gpio_request(GPIO_FN_VIO_HD2, NULL);
+	gpio_request(GPIO_FN_VIO_FLD, NULL);
+	gpio_request(GPIO_FN_VIO_CKO, NULL);
+	gpio_request(GPIO_FN_VIO_D15, NULL);
+	gpio_request(GPIO_FN_VIO_D14, NULL);
+	gpio_request(GPIO_FN_VIO_D13, NULL);
+	gpio_request(GPIO_FN_VIO_D12, NULL);
+	gpio_request(GPIO_FN_VIO_D11, NULL);
+	gpio_request(GPIO_FN_VIO_D10, NULL);
+	gpio_request(GPIO_FN_VIO_D9, NULL);
+	gpio_request(GPIO_FN_VIO_D8, NULL);
+
+	gpio_request(GPIO_PTZ7, NULL);
+	gpio_direction_output(GPIO_PTZ7, 0); /* OE_CAM */
+	gpio_request(GPIO_PTZ6, NULL);
+	gpio_direction_output(GPIO_PTZ6, 0); /* STBY_CAM */
+	gpio_request(GPIO_PTZ5, NULL);
+	gpio_direction_output(GPIO_PTZ5, 0); /* RST_CAM */
+	gpio_request(GPIO_PTZ4, NULL);
+	gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
+
+	__raw_writew(__raw_readw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
+
+	/* FLCTL */
+	gpio_request(GPIO_FN_FCE, NULL);
+	gpio_request(GPIO_FN_NAF7, NULL);
+	gpio_request(GPIO_FN_NAF6, NULL);
+	gpio_request(GPIO_FN_NAF5, NULL);
+	gpio_request(GPIO_FN_NAF4, NULL);
+	gpio_request(GPIO_FN_NAF3, NULL);
+	gpio_request(GPIO_FN_NAF2, NULL);
+	gpio_request(GPIO_FN_NAF1, NULL);
+	gpio_request(GPIO_FN_NAF0, NULL);
+	gpio_request(GPIO_FN_FCDE, NULL);
+	gpio_request(GPIO_FN_FOE, NULL);
+	gpio_request(GPIO_FN_FSC, NULL);
+	gpio_request(GPIO_FN_FWE, NULL);
+	gpio_request(GPIO_FN_FRB, NULL);
+
+	__raw_writew(0, PORT_HIZCRC);
+	__raw_writew(0xFFFF, PORT_DRVCRA);
+	__raw_writew(0xFFFF, PORT_DRVCRB);
+
+	platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
+
+	/* SDHI0 - CN3 - SD CARD */
+	gpio_request(GPIO_FN_SDHI0CD_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0WP_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0D3_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0D2_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0D1_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0D0_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0CMD_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0CLK_PTD, NULL);
+
+	/* SDHI1 - CN7 - MICRO SD CARD */
+	gpio_request(GPIO_FN_SDHI1CD, NULL);
+	gpio_request(GPIO_FN_SDHI1D3, NULL);
+	gpio_request(GPIO_FN_SDHI1D2, NULL);
+	gpio_request(GPIO_FN_SDHI1D1, NULL);
+	gpio_request(GPIO_FN_SDHI1D0, NULL);
+	gpio_request(GPIO_FN_SDHI1CMD, NULL);
+	gpio_request(GPIO_FN_SDHI1CLK, NULL);
+
+	i2c_register_board_info(0, ap325rxa_i2c_devices,
+				ARRAY_SIZE(ap325rxa_i2c_devices));
+
+	return platform_add_devices(ap325rxa_devices,
+				ARRAY_SIZE(ap325rxa_devices));
+}
+arch_initcall(ap325rxa_devices_setup);
+
+/* Return the board specific boot mode pin configuration */
+static int ap325rxa_mode_pins(void)
+{
+	/* MD0=0, MD1=0, MD2=0: Clock Mode 0
+	 * MD3=0: 16-bit Area0 Bus Width
+	 * MD5=1: Little Endian
+	 * TSTMD=1, MD8=1: Test Mode Disabled
+	 */
+	return MODE_PIN5 | MODE_PIN8;
+}
+
+static struct sh_machine_vector mv_ap325rxa __initmv = {
+	.mv_name = "AP-325RXA",
+	.mv_mode_pins = ap325rxa_mode_pins,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-cayman/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-cayman/Makefile
new file mode 100644
index 0000000..00fa3ea
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-cayman/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for the Hitachi Cayman specific parts of the kernel
+#
+obj-y := setup.o irq.o panic.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-cayman/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-cayman/irq.c
new file mode 100644
index 0000000..724e8b7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-cayman/irq.c
@@ -0,0 +1,157 @@
+/*
+ * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
+ *
+ * This file handles the board specific parts of the Cayman interrupt system
+ *
+ * Copyright (C) 2002 Stuart Menefy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/signal.h>
+#include <cpu/irq.h>
+#include <asm/page.h>
+
+/* Setup for the SMSC FDC37C935 / LAN91C100FD */
+#define SMSC_IRQ         IRQ_IRL1
+
+/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
+#define PCI2_IRQ         IRQ_IRL3
+
+unsigned long epld_virt;
+
+#define EPLD_BASE        0x04002000
+#define EPLD_STATUS_BASE (epld_virt + 0x10)
+#define EPLD_MASK_BASE   (epld_virt + 0x20)
+
+/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto
+   the same SH-5 interrupt */
+
+static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id)
+{
+        printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n");
+	return IRQ_NONE;
+}
+
+static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
+{
+        printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq);
+	return IRQ_NONE;
+}
+
+static struct irqaction cayman_action_smsc = {
+	.name		= "Cayman SMSC Mux",
+	.handler	= cayman_interrupt_smsc,
+};
+
+static struct irqaction cayman_action_pci2 = {
+	.name		= "Cayman PCI2 Mux",
+	.handler	= cayman_interrupt_pci2,
+};
+
+static void enable_cayman_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned long flags;
+	unsigned long mask;
+	unsigned int reg;
+	unsigned char bit;
+
+	irq -= START_EXT_IRQS;
+	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+	bit = 1<<(irq % 8);
+	local_irq_save(flags);
+	mask = __raw_readl(reg);
+	mask |= bit;
+	__raw_writel(mask, reg);
+	local_irq_restore(flags);
+}
+
+static void disable_cayman_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned long flags;
+	unsigned long mask;
+	unsigned int reg;
+	unsigned char bit;
+
+	irq -= START_EXT_IRQS;
+	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+	bit = 1<<(irq % 8);
+	local_irq_save(flags);
+	mask = __raw_readl(reg);
+	mask &= ~bit;
+	__raw_writel(mask, reg);
+	local_irq_restore(flags);
+}
+
+struct irq_chip cayman_irq_type = {
+	.name		= "Cayman-IRQ",
+	.irq_unmask	= enable_cayman_irq,
+	.irq_mask	= disable_cayman_irq,
+};
+
+int cayman_irq_demux(int evt)
+{
+	int irq = intc_evt_to_irq[evt];
+
+	if (irq == SMSC_IRQ) {
+		unsigned long status;
+		int i;
+
+		status = __raw_readl(EPLD_STATUS_BASE) &
+			 __raw_readl(EPLD_MASK_BASE) & 0xff;
+		if (status == 0) {
+			irq = -1;
+		} else {
+			for (i=0; i<8; i++) {
+				if (status & (1<<i))
+					break;
+			}
+			irq = START_EXT_IRQS + i;
+		}
+	}
+
+	if (irq == PCI2_IRQ) {
+		unsigned long status;
+		int i;
+
+		status = __raw_readl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
+			 __raw_readl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
+		if (status == 0) {
+			irq = -1;
+		} else {
+			for (i=0; i<8; i++) {
+				if (status & (1<<i))
+					break;
+			}
+			irq = START_EXT_IRQS + (3 * 8) + i;
+		}
+	}
+
+	return irq;
+}
+
+void init_cayman_irq(void)
+{
+	int i;
+
+	epld_virt = (unsigned long)ioremap_nocache(EPLD_BASE, 1024);
+	if (!epld_virt) {
+		printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
+		return;
+	}
+
+	for (i = 0; i < NR_EXT_IRQS; i++) {
+		irq_set_chip_and_handler(START_EXT_IRQS + i,
+					 &cayman_irq_type, handle_level_irq);
+	}
+
+	/* Setup the SMSC interrupt */
+	setup_irq(SMSC_IRQ, &cayman_action_smsc);
+	setup_irq(PCI2_IRQ, &cayman_action_pci2);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-cayman/panic.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-cayman/panic.c
new file mode 100644
index 0000000..d1e6730
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-cayman/panic.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2003  Richard Curnow, SuperH UK Limited
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <cpu/registers.h>
+
+/* THIS IS A PHYSICAL ADDRESS */
+#define HDSP2534_ADDR (0x04002100)
+
+static void poor_mans_delay(void)
+{
+	int i;
+
+	for (i = 0; i < 2500000; i++)
+		cpu_relax();
+}
+
+static void show_value(unsigned long x)
+{
+	int i;
+	unsigned nibble;
+	for (i = 0; i < 8; i++) {
+		nibble = ((x >> (i * 4)) & 0xf);
+
+		__raw_writeb(nibble + ((nibble > 9) ? 55 : 48),
+			  HDSP2534_ADDR + 0xe0 + ((7 - i) << 2));
+	}
+}
+
+void
+panic_handler(unsigned long panicPC, unsigned long panicSSR,
+	      unsigned long panicEXPEVT)
+{
+	while (1) {
+		/* This piece of code displays the PC on the LED display */
+		show_value(panicPC);
+		poor_mans_delay();
+		show_value(panicSSR);
+		poor_mans_delay();
+		show_value(panicEXPEVT);
+		poor_mans_delay();
+	}
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-cayman/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-cayman/setup.c
new file mode 100644
index 0000000..9c292c2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-cayman/setup.c
@@ -0,0 +1,184 @@
+/*
+ * arch/sh/mach-cayman/setup.c
+ *
+ * SH5 Cayman support
+ *
+ * Copyright (C) 2002  David J. Mckay & Benedict Gaster
+ * Copyright (C) 2003 - 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <cpu/irq.h>
+
+/*
+ * Platform Dependent Interrupt Priorities.
+ */
+
+/* Using defaults defined in irq.h */
+#define	RES NO_PRIORITY		/* Disabled */
+#define IR0 IRL0_PRIORITY	/* IRLs */
+#define IR1 IRL1_PRIORITY
+#define IR2 IRL2_PRIORITY
+#define IR3 IRL3_PRIORITY
+#define PCA INTA_PRIORITY	/* PCI Ints */
+#define PCB INTB_PRIORITY
+#define PCC INTC_PRIORITY
+#define PCD INTD_PRIORITY
+#define SER TOP_PRIORITY
+#define ERR TOP_PRIORITY
+#define PW0 TOP_PRIORITY
+#define PW1 TOP_PRIORITY
+#define PW2 TOP_PRIORITY
+#define PW3 TOP_PRIORITY
+#define DM0 NO_PRIORITY		/* DMA Ints */
+#define DM1 NO_PRIORITY
+#define DM2 NO_PRIORITY
+#define DM3 NO_PRIORITY
+#define DAE NO_PRIORITY
+#define TU0 TIMER_PRIORITY	/* TMU Ints */
+#define TU1 NO_PRIORITY
+#define TU2 NO_PRIORITY
+#define TI2 NO_PRIORITY
+#define ATI NO_PRIORITY		/* RTC Ints */
+#define PRI NO_PRIORITY
+#define CUI RTC_PRIORITY
+#define ERI SCIF_PRIORITY	/* SCIF Ints */
+#define RXI SCIF_PRIORITY
+#define BRI SCIF_PRIORITY
+#define TXI SCIF_PRIORITY
+#define ITI TOP_PRIORITY	/* WDT Ints */
+
+/* Setup for the SMSC FDC37C935 */
+#define SMSC_SUPERIO_BASE	0x04000000
+#define SMSC_CONFIG_PORT_ADDR	0x3f0
+#define SMSC_INDEX_PORT_ADDR	SMSC_CONFIG_PORT_ADDR
+#define SMSC_DATA_PORT_ADDR	0x3f1
+
+#define SMSC_ENTER_CONFIG_KEY	0x55
+#define SMSC_EXIT_CONFIG_KEY	0xaa
+
+#define SMCS_LOGICAL_DEV_INDEX	0x07
+#define SMSC_DEVICE_ID_INDEX	0x20
+#define SMSC_DEVICE_REV_INDEX	0x21
+#define SMSC_ACTIVATE_INDEX	0x30
+#define SMSC_PRIMARY_BASE_INDEX  0x60
+#define SMSC_SECONDARY_BASE_INDEX 0x62
+#define SMSC_PRIMARY_INT_INDEX	0x70
+#define SMSC_SECONDARY_INT_INDEX 0x72
+
+#define SMSC_IDE1_DEVICE	1
+#define SMSC_KEYBOARD_DEVICE	7
+#define SMSC_CONFIG_REGISTERS	8
+
+#define SMSC_SUPERIO_READ_INDEXED(index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	inb(SMSC_DATA_PORT_ADDR); })
+#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	outb((val),   SMSC_DATA_PORT_ADDR); })
+
+#define IDE1_PRIMARY_BASE	0x01f0
+#define IDE1_SECONDARY_BASE	0x03f6
+
+unsigned long smsc_superio_virt;
+
+int platform_int_priority[NR_INTC_IRQS] = {
+	IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD,	/* IRQ  0- 7 */
+	RES, RES, RES, RES, SER, ERR, PW3, PW2,	/* IRQ  8-15 */
+	PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES,	/* IRQ 16-23 */
+	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 24-31 */
+	TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI,	/* IRQ 32-39 */
+	RXI, BRI, TXI, RES, RES, RES, RES, RES,	/* IRQ 40-47 */
+	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 48-55 */
+	RES, RES, RES, RES, RES, RES, RES, ITI,	/* IRQ 56-63 */
+};
+
+static int __init smsc_superio_setup(void)
+{
+	unsigned char devid, devrev;
+
+	smsc_superio_virt = (unsigned long)ioremap_nocache(SMSC_SUPERIO_BASE, 1024);
+	if (!smsc_superio_virt) {
+		panic("Unable to remap SMSC SuperIO\n");
+	}
+
+	/* Initially the chip is in run state */
+	/* Put it into configuration state */
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	/* Read device ID info */
+	devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
+	devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
+	printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev);
+
+	/* Select the keyboard device */
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+
+	/* enable it */
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+	/* Select the interrupts */
+	/* On a PC keyboard is IRQ1, mouse is IRQ12 */
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
+	SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
+
+	/*
+	 * Only IDE1 exists on the Cayman
+	 */
+
+	/* Power it on */
+	SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22);
+
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8,
+				   SMSC_PRIMARY_BASE_INDEX + 0);
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff,
+				   SMSC_PRIMARY_BASE_INDEX + 1);
+
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8,
+				   SMSC_SECONDARY_BASE_INDEX + 0);
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff,
+				   SMSC_SECONDARY_BASE_INDEX + 1);
+
+	SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS,
+				   SMCS_LOGICAL_DEV_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
+	SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
+
+	/* Exit the configuration state */
+	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	return 0;
+}
+device_initcall(smsc_superio_setup);
+
+static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
+{
+	if (port < 0x400) {
+		extern unsigned long smsc_superio_virt;
+		return (void __iomem *)((port << 2) | smsc_superio_virt);
+	}
+
+	return (void __iomem *)port;
+}
+
+extern void init_cayman_irq(void);
+
+static struct sh_machine_vector mv_cayman __initmv = {
+	.mv_name		= "Hitachi Cayman",
+	.mv_ioport_map		= cayman_ioport_map,
+	.mv_init_irq		= init_cayman_irq,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-dreamcast/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-dreamcast/Makefile
new file mode 100644
index 0000000..7b97546
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-dreamcast/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Sega Dreamcast specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o rtc.o
+
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-dreamcast/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-dreamcast/irq.c
new file mode 100644
index 0000000..2789647
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-dreamcast/irq.c
@@ -0,0 +1,156 @@
+/*
+ * arch/sh/boards/dreamcast/irq.c
+ *
+ * Holly IRQ support for the Sega Dreamcast.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
+ *
+ * This file is part of the LinuxDC project (www.linuxdc.org)
+ * Released under the terms of the GNU GPL v2.0
+ */
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <mach/sysasic.h>
+
+/*
+ * Dreamcast System ASIC Hardware Events -
+ *
+ * The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
+ * hardware events from system peripherals and triggering an SH7750 IRQ.
+ * Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
+ * set in the Event Mask Registers (EMRs).  When a hardware event is
+ * triggered, its corresponding bit in the Event Status Registers (ESRs)
+ * is set, and that bit should be rewritten to the ESR to acknowledge that
+ * event.
+ *
+ * There are three 32-bit ESRs located at 0xa05f6900 - 0xa05f6908.  Event
+ * types can be found in arch/sh/include/mach-dreamcast/mach/sysasic.h.
+ * There are three groups of EMRs that parallel the ESRs.  Each EMR group
+ * corresponds to an IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13,
+ * 0xa05f6920 - 0xa05f6928 triggers IRQ 11, and 0xa05f6930 - 0xa05f6938
+ * triggers IRQ 9.
+ *
+ * In the kernel, these events are mapped to virtual IRQs so that drivers can
+ * respond to them as they would a normal interrupt.  In order to keep this
+ * mapping simple, the events are mapped as:
+ *
+ * 6900/6910 - Events  0-31, IRQ 13
+ * 6904/6924 - Events 32-63, IRQ 11
+ * 6908/6938 - Events 64-95, IRQ  9
+ *
+ */
+
+#define ESR_BASE 0x005f6900    /* Base event status register */
+#define EMR_BASE 0x005f6910    /* Base event mask register */
+
+/*
+ * Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
+ * 1 = 0x6920, 2 = 0x6930; also determine the event offset.
+ */
+#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
+
+/* Return the hardware event's bit position within the EMR/ESR */
+#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
+
+/*
+ * For each of these *_irq routines, the IRQ passed in is the virtual IRQ
+ * (logically mapped to the corresponding bit for the hardware event).
+ */
+
+/* Disable the hardware event by masking its bit in its EMR */
+static inline void disable_systemasic_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	__u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+	__u32 mask;
+
+	mask = inl(emr);
+	mask &= ~(1 << EVENT_BIT(irq));
+	outl(mask, emr);
+}
+
+/* Enable the hardware event by setting its bit in its EMR */
+static inline void enable_systemasic_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	__u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+	__u32 mask;
+
+	mask = inl(emr);
+	mask |= (1 << EVENT_BIT(irq));
+	outl(mask, emr);
+}
+
+/* Acknowledge a hardware event by writing its bit back to its ESR */
+static void mask_ack_systemasic_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	__u32 esr = ESR_BASE + (LEVEL(irq) << 2);
+	disable_systemasic_irq(data);
+	outl((1 << EVENT_BIT(irq)), esr);
+}
+
+struct irq_chip systemasic_int = {
+	.name		= "System ASIC",
+	.irq_mask	= disable_systemasic_irq,
+	.irq_mask_ack	= mask_ack_systemasic_irq,
+	.irq_unmask	= enable_systemasic_irq,
+};
+
+/*
+ * Map the hardware event indicated by the processor IRQ to a virtual IRQ.
+ */
+int systemasic_irq_demux(int irq)
+{
+	__u32 emr, esr, status, level;
+	__u32 j, bit;
+
+	switch (irq) {
+	case 13:
+		level = 0;
+		break;
+	case 11:
+		level = 1;
+		break;
+	case  9:
+		level = 2;
+		break;
+	default:
+		return irq;
+	}
+	emr = EMR_BASE + (level << 4) + (level << 2);
+	esr = ESR_BASE + (level << 2);
+
+	/* Mask the ESR to filter any spurious, unwanted interrupts */
+	status = inl(esr);
+	status &= inl(emr);
+
+	/* Now scan and find the first set bit as the event to map */
+	for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
+		if (status & bit) {
+			irq = HW_EVENT_IRQ_BASE + j + (level << 5);
+			return irq;
+		}
+	}
+
+	/* Not reached */
+	return irq;
+}
+
+void systemasic_irq_init(void)
+{
+	int irq_base, i;
+
+	irq_base = irq_alloc_descs(HW_EVENT_IRQ_BASE, HW_EVENT_IRQ_BASE,
+				   HW_EVENT_IRQ_MAX - HW_EVENT_IRQ_BASE, -1);
+	if (IS_ERR_VALUE(irq_base)) {
+		pr_err("%s: failed hooking irqs\n", __func__);
+		return;
+	}
+
+	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
+		irq_set_chip_and_handler(i, &systemasic_int, handle_level_irq);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-dreamcast/rtc.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-dreamcast/rtc.c
new file mode 100644
index 0000000..061d657
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-dreamcast/rtc.c
@@ -0,0 +1,81 @@
+/*
+ * arch/sh/boards/dreamcast/rtc.c
+ *
+ * Dreamcast AICA RTC routines.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
+ * Copyright (c) 2002 Paul Mundt <lethal@chaoticdreams.org>
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ */
+
+#include <linux/time.h>
+#include <asm/rtc.h>
+#include <asm/io.h>
+
+/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in
+   seconds) to get the standard Unix Epoch when getting the time, and add
+   20 years when setting the time. */
+#define TWENTY_YEARS ((20 * 365LU + 5) * 86400)
+
+/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit
+   registers.*/
+#define AICA_RTC_SECS_H		0xa0710000
+#define AICA_RTC_SECS_L		0xa0710004
+
+/**
+ * aica_rtc_gettimeofday - Get the time from the AICA RTC
+ * @ts: pointer to resulting timespec
+ *
+ * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
+ */
+static void aica_rtc_gettimeofday(struct timespec *ts)
+{
+	unsigned long val1, val2;
+
+	do {
+		val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(__raw_readl(AICA_RTC_SECS_L) & 0xffff);
+
+		val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(__raw_readl(AICA_RTC_SECS_L) & 0xffff);
+	} while (val1 != val2);
+
+	ts->tv_sec = val1 - TWENTY_YEARS;
+
+	/* Can't get nanoseconds with just a seconds counter. */
+	ts->tv_nsec = 0;
+}
+
+/**
+ * aica_rtc_settimeofday - Set the AICA RTC to the current time
+ * @secs: contains the time_t to set
+ *
+ * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
+ */
+static int aica_rtc_settimeofday(const time_t secs)
+{
+	unsigned long val1, val2;
+	unsigned long adj = secs + TWENTY_YEARS;
+
+	do {
+		__raw_writel((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
+		__raw_writel((adj & 0xffff), AICA_RTC_SECS_L);
+
+		val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(__raw_readl(AICA_RTC_SECS_L) & 0xffff);
+
+		val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(__raw_readl(AICA_RTC_SECS_L) & 0xffff);
+	} while (val1 != val2);
+
+	return 0;
+}
+
+void aica_time_init(void)
+{
+	rtc_sh_get_time = aica_rtc_gettimeofday;
+	rtc_sh_set_time = aica_rtc_settimeofday;
+}
+
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-dreamcast/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-dreamcast/setup.c
new file mode 100644
index 0000000..ad1a4db
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-dreamcast/setup.c
@@ -0,0 +1,41 @@
+/*
+ * arch/sh/boards/dreamcast/setup.c
+ *
+ * Hardware support for the Sega Dreamcast.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@linuxdc.org>
+ * Copyright (c) 2002, 2003, 2004 Paul Mundt <lethal@linux-sh.org>
+ *
+ * This file is part of the LinuxDC project (www.linuxdc.org)
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ * This file originally bore the message (with enclosed-$):
+ *	Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp
+ *	SEGA Dreamcast support
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/rtc.h>
+#include <asm/machvec.h>
+#include <mach/sysasic.h>
+
+static void __init dreamcast_setup(char **cmdline_p)
+{
+	board_time_init = aica_time_init;
+}
+
+static struct sh_machine_vector mv_dreamcast __initmv = {
+	.mv_name		= "Sega Dreamcast",
+	.mv_setup		= dreamcast_setup,
+	.mv_irq_demux		= systemasic_irq_demux,
+	.mv_init_irq		= systemasic_irq_init,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-ecovec24/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-ecovec24/Makefile
new file mode 100644
index 0000000..e69bc82
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-ecovec24/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the R0P7724LC0011/21RL (EcoVec)
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+obj-y	 := setup.o sdram.o
\ No newline at end of file
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-ecovec24/sdram.S b/src/kernel/linux/v4.14/arch/sh/boards/mach-ecovec24/sdram.S
new file mode 100644
index 0000000..3963c6f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-ecovec24/sdram.S
@@ -0,0 +1,111 @@
+/*
+ * Ecovec24 sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(ecovec24_sdram_enter_start)
+
+	/* DBSC: put memory in self-refresh mode */
+
+	ED 0xFD000010, 0x00000000 /* DBEN */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(ecovec24_sdram_enter_end)
+
+	.balign 4
+ENTRY(ecovec24_sdram_leave_start)
+
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_RSTANDBY, r0
+	bf	resume_rstandby
+
+	/* DBSC: put memory in auto-refresh mode */
+
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	WAIT 1
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+resume_rstandby:
+
+	/* DBSC: re-initialize and put in auto-refresh */
+
+	ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
+	ED 0xFD000020, 0x015B0002 /* DBCONF */
+	ED 0xFD000030, 0x03071502 /* DBTR0 */
+	ED 0xFD000034, 0x02020102 /* DBTR1 */
+	ED 0xFD000038, 0x01090405 /* DBTR2 */
+	ED 0xFD00003C, 0x00000002 /* DBTR3 */
+	ED 0xFD000008, 0x00000005 /* DBKIND */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000018, 0x00000001 /* DBCKECNT */
+
+	mov	#100,r0
+WAIT_400NS:
+	dt	r0
+	bf	WAIT_400NS
+
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
+	ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
+	ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
+	ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
+	ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
+	ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
+
+	mov	#100,r0
+WAIT_400NS_2:
+	dt	r0
+	bf	WAIT_400NS_2
+
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
+	ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
+
+	mov.l	DUMMY,r0
+	mov.l	@r0, r1 /* force single dummy read */
+
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+	.balign 4
+DUMMY:	.long	0xac400000
+
+ENTRY(ecovec24_sdram_leave_end)
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-ecovec24/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-ecovec24/setup.c
new file mode 100644
index 0000000..1faf6cb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-ecovec24/setup.c
@@ -0,0 +1,1449 @@
+/*
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mfd/tmio.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/usb/renesas_usbhs.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/tsc2007.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/sh_msiof.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/platform_data/gpio_backlight.h>
+#include <linux/sh_eth.h>
+#include <linux/sh_intc.h>
+#include <linux/videodev2.h>
+#include <video/sh_mobile_lcdc.h>
+#include <sound/sh_fsi.h>
+#include <sound/simple_card.h>
+#include <media/drv-intf/sh_mobile_ceu.h>
+#include <media/soc_camera.h>
+#include <media/i2c/tw9910.h>
+#include <media/i2c/mt9t112.h>
+#include <asm/heartbeat.h>
+#include <asm/clock.h>
+#include <asm/suspend.h>
+#include <cpu/sh7724.h>
+
+/*
+ *  Address      Interface        BusWidth
+ *-----------------------------------------
+ *  0x0000_0000  uboot            16bit
+ *  0x0004_0000  Linux romImage   16bit
+ *  0x0014_0000  MTD for Linux    16bit
+ *  0x0400_0000  Internal I/O     16/32bit
+ *  0x0800_0000  DRAM             32bit
+ *  0x1800_0000  MFI              16bit
+ */
+
+/* SWITCH
+ *------------------------------
+ * DS2[1] = FlashROM write protect  ON     : write protect
+ *                                  OFF    : No write protect
+ * DS2[2] = RMII / TS, SCIF         ON     : RMII
+ *                                  OFF    : TS, SCIF3
+ * DS2[3] = Camera / Video          ON     : Camera
+ *                                  OFF    : NTSC/PAL (IN)
+ * DS2[5] = NTSC_OUT Clock          ON     : On board OSC
+ *                                  OFF    : SH7724 DV_CLK
+ * DS2[6-7] = MMC / SD              ON-OFF : SD
+ *                                  OFF-ON : MMC
+ */
+
+/*
+ * FSI - DA7210
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set 'HeadPhone' 80
+ * amixer set 'Out Mixer Left DAC Left' on
+ * amixer set 'Out Mixer Right DAC Right' on
+ */
+
+/* Heartbeat */
+static unsigned char led_pos[] = { 0, 1, 2, 3 };
+
+static struct heartbeat_data heartbeat_data = {
+	.nr_bits = 4,
+	.bit_pos = led_pos,
+};
+
+static struct resource heartbeat_resource = {
+	.start  = 0xA405012C, /* PTG */
+	.end    = 0xA405012E - 1,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
+};
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name = "boot loader",
+		.offset = 0,
+		.size = (5 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name = "free-area",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x03ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.dev		= {
+		.platform_data = &nor_flash_data,
+	},
+};
+
+/* SH Eth */
+#define SH_ETH_ADDR	(0xA4600000)
+static struct resource sh_eth_resources[] = {
+	[0] = {
+		.start = SH_ETH_ADDR,
+		.end   = SH_ETH_ADDR + 0x1FC,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = evt2irq(0xd60),
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct sh_eth_plat_data sh_eth_plat = {
+	.phy = 0x1f, /* SMSC LAN8700 */
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+	.ether_link_active_low = 1
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh7724-ether",
+	.id = 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+	.resource = sh_eth_resources,
+};
+
+/* USB0 host */
+static void usb0_port_power(int port, int power)
+{
+	gpio_set_value(GPIO_PTB4, power);
+}
+
+static struct r8a66597_platdata usb0_host_data = {
+	.on_chip = 1,
+	.port_power = usb0_port_power,
+};
+
+static struct resource usb0_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d80000,
+		.end	= 0xa4d80124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa20),
+		.end	= evt2irq(0xa20),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device usb0_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb0_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb0_host_resources),
+	.resource	= usb0_host_resources,
+};
+
+/* USB1 host/function */
+static void usb1_port_power(int port, int power)
+{
+	gpio_set_value(GPIO_PTB5, power);
+}
+
+static struct r8a66597_platdata usb1_common_data = {
+	.on_chip = 1,
+	.port_power = usb1_port_power,
+};
+
+static struct resource usb1_common_resources[] = {
+	[0] = {
+		.start	= 0xa4d90000,
+		.end	= 0xa4d90124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa40),
+		.end	= evt2irq(0xa40),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device usb1_common_device = {
+	/* .name will be added in arch_setup */
+	.id		= 1,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb1_common_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb1_common_resources),
+	.resource	= usb1_common_resources,
+};
+
+/*
+ * USBHS
+ */
+static int usbhs_get_id(struct platform_device *pdev)
+{
+	return gpio_get_value(GPIO_PTB3);
+}
+
+static int usbhs_phy_reset(struct platform_device *pdev)
+{
+	/* enable vbus if HOST */
+	if (!gpio_get_value(GPIO_PTB3))
+		gpio_set_value(GPIO_PTB5, 1);
+
+	return 0;
+}
+
+static struct renesas_usbhs_platform_info usbhs_info = {
+	.platform_callback = {
+		.get_id		= usbhs_get_id,
+		.phy_reset	= usbhs_phy_reset,
+	},
+	.driver_param = {
+		.buswait_bwait		= 4,
+		.detection_delay	= 5,
+		.d0_tx_id = SHDMA_SLAVE_USB1D0_TX,
+		.d0_rx_id = SHDMA_SLAVE_USB1D0_RX,
+		.d1_tx_id = SHDMA_SLAVE_USB1D1_TX,
+		.d1_rx_id = SHDMA_SLAVE_USB1D1_RX,
+	},
+};
+
+static struct resource usbhs_resources[] = {
+	[0] = {
+		.start	= 0xa4d90000,
+		.end	= 0xa4d90124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa40),
+		.end	= evt2irq(0xa40),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usbhs_device = {
+	.name	= "renesas_usbhs",
+	.id	= 1,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbhs_info,
+	},
+	.num_resources	= ARRAY_SIZE(usbhs_resources),
+	.resource	= usbhs_resources,
+};
+
+/* LCDC and backlight */
+static const struct fb_videomode ecovec_lcd_modes[] = {
+	{
+		.name		= "Panel",
+		.xres		= 800,
+		.yres		= 480,
+		.left_margin	= 220,
+		.right_margin	= 110,
+		.hsync_len	= 70,
+		.upper_margin	= 20,
+		.lower_margin	= 5,
+		.vsync_len	= 5,
+		.sync		= 0, /* hsync and vsync are active low */
+	},
+};
+
+static const struct fb_videomode ecovec_dvi_modes[] = {
+	{
+		.name		= "DVI",
+		.xres		= 1280,
+		.yres		= 720,
+		.left_margin	= 220,
+		.right_margin	= 110,
+		.hsync_len	= 40,
+		.upper_margin	= 20,
+		.lower_margin	= 5,
+		.vsync_len	= 5,
+		.sync = 0, /* hsync and vsync are active low */
+	},
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.ch[0] = {
+		.interface_type = RGB18,
+		.chan = LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.panel_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xf40),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+};
+
+static struct gpio_backlight_platform_data gpio_backlight_data = {
+	.fbdev = &lcdc_device.dev,
+	.gpio = GPIO_PTR1,
+	.def_value = 1,
+	.name = "backlight",
+};
+
+static struct platform_device gpio_backlight_device = {
+	.name = "gpio-backlight",
+	.dev = {
+		.platform_data = &gpio_backlight_data,
+	},
+};
+
+/* CEU0 */
+static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu0_resources[] = {
+	[0] = {
+		.name	= "CEU0",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x880),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu0_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(ceu0_resources),
+	.resource	= ceu0_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu0_info,
+	},
+};
+
+/* CEU1 */
+static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu1_resources[] = {
+	[0] = {
+		.name	= "CEU1",
+		.start	= 0xfe914000,
+		.end	= 0xfe91409f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x9e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu1_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 1, /* "ceu1" clock */
+	.num_resources	= ARRAY_SIZE(ceu1_resources),
+	.resource	= ceu1_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu1_info,
+	},
+};
+
+/* I2C device */
+static struct i2c_board_info i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("da7210", 0x1a),
+	},
+};
+
+static struct i2c_board_info i2c1_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+	{
+		I2C_BOARD_INFO("lis3lv02d", 0x1c),
+		.irq = evt2irq(0x620),
+	}
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+	.mode		= SH_KEYSC_MODE_1,
+	.scan_timing	= 3,
+	.delay		= 50,
+	.kycr2_delay	= 100,
+	.keycodes	= { KEY_1, 0, 0, 0, 0,
+			    KEY_2, 0, 0, 0, 0,
+			    KEY_3, 0, 0, 0, 0,
+			    KEY_4, 0, 0, 0, 0,
+			    KEY_5, 0, 0, 0, 0,
+			    KEY_6, 0, 0, 0, 0, },
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xbe0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* keysc0 clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
+/* TouchScreen */
+#define IRQ0 evt2irq(0x600)
+
+static int ts_get_pendown_state(struct device *dev)
+{
+	int val = 0;
+	gpio_free(GPIO_FN_INTC_IRQ0);
+	gpio_request(GPIO_PTZ0, NULL);
+	gpio_direction_input(GPIO_PTZ0);
+
+	val = gpio_get_value(GPIO_PTZ0);
+
+	gpio_free(GPIO_PTZ0);
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+
+	return val ? 0 : 1;
+}
+
+static int ts_init(void)
+{
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+	return 0;
+}
+
+static struct tsc2007_platform_data tsc2007_info = {
+	.model			= 2007,
+	.x_plate_ohms		= 180,
+	.get_pendown_state	= ts_get_pendown_state,
+	.init_platform_hw	= ts_init,
+};
+
+static struct i2c_board_info ts_i2c_clients = {
+	I2C_BOARD_INFO("tsc2007", 0x48),
+	.type		= "tsc2007",
+	.platform_data	= &tsc2007_info,
+	.irq		= IRQ0,
+};
+
+static struct regulator_consumer_supply cn12_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
+static struct regulator_init_data cn12_power_init_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(cn12_power_consumers),
+	.consumer_supplies      = cn12_power_consumers,
+};
+
+static struct fixed_voltage_config cn12_power_info = {
+	.supply_name = "CN12 SD/MMC Vdd",
+	.microvolts = 3300000,
+	.gpio = GPIO_PTB7,
+	.enable_high = 1,
+	.init_data = &cn12_power_init_data,
+};
+
+static struct platform_device cn12_power = {
+	.name = "reg-fixed-voltage",
+	.id   = 0,
+	.dev  = {
+		.platform_data = &cn12_power_info,
+	},
+};
+
+#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
+/* SDHI0 */
+static struct regulator_consumer_supply sdhi0_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct regulator_init_data sdhi0_power_init_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(sdhi0_power_consumers),
+	.consumer_supplies      = sdhi0_power_consumers,
+};
+
+static struct fixed_voltage_config sdhi0_power_info = {
+	.supply_name = "CN11 SD/MMC Vdd",
+	.microvolts = 3300000,
+	.gpio = GPIO_PTB6,
+	.enable_high = 1,
+	.init_data = &sdhi0_power_init_data,
+};
+
+static struct platform_device sdhi0_power = {
+	.name = "reg-fixed-voltage",
+	.id   = 1,
+	.dev  = {
+		.platform_data = &sdhi0_power_info,
+	},
+};
+
+static struct tmio_mmc_data sdhi0_info = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
+	.capabilities	= MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
+			  MMC_CAP_NEEDS_POLL,
+	.flags		= TMIO_MMC_USE_GPIO_CD,
+	.cd_gpio	= GPIO_PTY7,
+};
+
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0x04ce0000,
+		.end    = 0x04ce00ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xe80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi0_resources),
+	.resource       = sdhi0_resources,
+	.id             = 0,
+	.dev	= {
+		.platform_data	= &sdhi0_info,
+	},
+};
+
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
+/* SDHI1 */
+static struct tmio_mmc_data sdhi1_info = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI1_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI1_RX,
+	.capabilities	= MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
+			  MMC_CAP_NEEDS_POLL,
+	.flags		= TMIO_MMC_USE_GPIO_CD,
+	.cd_gpio	= GPIO_PTW7,
+};
+
+static struct resource sdhi1_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start  = 0x04cf0000,
+		.end    = 0x04cf00ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x4e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi1_resources),
+	.resource       = sdhi1_resources,
+	.id             = 1,
+	.dev	= {
+		.platform_data	= &sdhi1_info,
+	},
+};
+#endif /* CONFIG_MMC_SH_MMCIF */
+
+#else
+
+/* MMC SPI */
+static void mmc_spi_setpower(struct device *dev, unsigned int maskval)
+{
+	gpio_set_value(GPIO_PTB6, maskval ? 1 : 0);
+}
+
+static struct mmc_spi_platform_data mmc_spi_info = {
+	.caps = MMC_CAP_NEEDS_POLL,
+	.caps2 = MMC_CAP2_RO_ACTIVE_HIGH,
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
+	.setpower = mmc_spi_setpower,
+	.flags = MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO,
+	.cd_gpio = GPIO_PTY7,
+	.ro_gpio = GPIO_PTY6,
+};
+
+static struct spi_board_info spi_bus[] = {
+	{
+		.modalias	= "mmc_spi",
+		.platform_data	= &mmc_spi_info,
+		.max_speed_hz	= 5000000,
+		.mode		= SPI_MODE_0,
+		.controller_data = (void *) GPIO_PTM4,
+	},
+};
+
+/* MSIOF0 */
+static struct sh_msiof_spi_info msiof0_data = {
+	.num_chipselect = 1,
+};
+
+static struct resource msiof0_resources[] = {
+	[0] = {
+		.name	= "MSIOF0",
+		.start	= 0xa4c40000,
+		.end	= 0xa4c40063,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xc80),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device msiof0_device = {
+	.name		= "spi_sh_msiof",
+	.id		= 0, /* MSIOF0 */
+	.dev = {
+		.platform_data = &msiof0_data,
+	},
+	.num_resources	= ARRAY_SIZE(msiof0_resources),
+	.resource	= msiof0_resources,
+};
+
+#endif
+
+/* I2C Video/Camera */
+static struct i2c_board_info i2c_camera[] = {
+	{
+		I2C_BOARD_INFO("tw9910", 0x45),
+	},
+	{
+		/* 1st camera */
+		I2C_BOARD_INFO("mt9t112", 0x3c),
+	},
+	{
+		/* 2nd camera */
+		I2C_BOARD_INFO("mt9t112", 0x3c),
+	},
+};
+
+/* tw9910 */
+static int tw9910_power(struct device *dev, int mode)
+{
+	int val = mode ? 0 : 1;
+
+	gpio_set_value(GPIO_PTU2, val);
+	if (mode)
+		mdelay(100);
+
+	return 0;
+}
+
+static struct tw9910_video_info tw9910_info = {
+	.buswidth	= SOCAM_DATAWIDTH_8,
+	.mpout		= TW9910_MPO_FIELD,
+};
+
+static struct soc_camera_link tw9910_link = {
+	.i2c_adapter_id	= 0,
+	.bus_id		= 1,
+	.power		= tw9910_power,
+	.board_info	= &i2c_camera[0],
+	.priv		= &tw9910_info,
+};
+
+/* mt9t112 */
+static int mt9t112_power1(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_PTA3, mode);
+	if (mode)
+		mdelay(100);
+
+	return 0;
+}
+
+static struct mt9t112_camera_info mt9t112_info1 = {
+	.flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
+	.divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
+};
+
+static struct soc_camera_link mt9t112_link1 = {
+	.i2c_adapter_id	= 0,
+	.power		= mt9t112_power1,
+	.bus_id		= 0,
+	.board_info	= &i2c_camera[1],
+	.priv		= &mt9t112_info1,
+};
+
+static int mt9t112_power2(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_PTA4, mode);
+	if (mode)
+		mdelay(100);
+
+	return 0;
+}
+
+static struct mt9t112_camera_info mt9t112_info2 = {
+	.flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
+	.divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
+};
+
+static struct soc_camera_link mt9t112_link2 = {
+	.i2c_adapter_id	= 1,
+	.power		= mt9t112_power2,
+	.bus_id		= 1,
+	.board_info	= &i2c_camera[2],
+	.priv		= &mt9t112_info2,
+};
+
+static struct platform_device camera_devices[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &tw9910_link,
+		},
+	},
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 1,
+		.dev	= {
+			.platform_data = &mt9t112_link1,
+		},
+	},
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 2,
+		.dev	= {
+			.platform_data = &mt9t112_link2,
+		},
+	},
+};
+
+/* FSI */
+static struct resource fsi_resources[] = {
+	[0] = {
+		.name	= "FSI",
+		.start	= 0xFE3C0000,
+		.end	= 0xFE3C021d,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xf80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device fsi_device = {
+	.name		= "sh_fsi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(fsi_resources),
+	.resource	= fsi_resources,
+};
+
+static struct asoc_simple_card_info fsi_da7210_info = {
+	.name		= "DA7210",
+	.card		= "FSIB-DA7210",
+	.codec		= "da7210.0-001a",
+	.platform	= "sh_fsi.0",
+	.daifmt		= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM,
+	.cpu_dai = {
+		.name	= "fsib-dai",
+	},
+	.codec_dai = {
+		.name	= "da7210-hifi",
+	},
+};
+
+static struct platform_device fsi_da7210_device = {
+	.name	= "asoc-simple-card",
+	.dev	= {
+		.platform_data	= &fsi_da7210_info,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &fsi_da7210_device.dev.coherent_dma_mask,
+	},
+};
+
+
+/* IrDA */
+static struct resource irda_resources[] = {
+	[0] = {
+		.name	= "IrDA",
+		.start  = 0xA45D0000,
+		.end    = 0xA45D0049,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x480),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device irda_device = {
+	.name           = "sh_sir",
+	.num_resources  = ARRAY_SIZE(irda_resources),
+	.resource       = irda_resources,
+};
+
+#include <media/i2c/ak881x.h>
+#include <media/drv-intf/sh_vou.h>
+
+static struct ak881x_pdata ak881x_pdata = {
+	.flags = AK881X_IF_MODE_SLAVE,
+};
+
+static struct i2c_board_info ak8813 = {
+	I2C_BOARD_INFO("ak8813", 0x20),
+	.platform_data = &ak881x_pdata,
+};
+
+static struct sh_vou_pdata sh_vou_pdata = {
+	.bus_fmt	= SH_VOU_BUS_8BIT,
+	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
+	.board_info	= &ak8813,
+	.i2c_adap	= 0,
+};
+
+static struct resource sh_vou_resources[] = {
+	[0] = {
+		.start  = 0xfe960000,
+		.end    = 0xfe962043,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x8e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vou_device = {
+	.name           = "sh-vou",
+	.id		= -1,
+	.num_resources  = ARRAY_SIZE(sh_vou_resources),
+	.resource       = sh_vou_resources,
+	.dev		= {
+		.platform_data	= &sh_vou_pdata,
+	},
+};
+
+#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
+/* SH_MMCIF */
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "SH_MMCIF",
+		.start	= 0xA4CA0000,
+		.end	= 0xA4CA00FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* MMC2I */
+		.start	= evt2irq(0x5a0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* MMC3I */
+		.start	= evt2irq(0x5c0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.sup_pclk	= 0, /* SH7724: Max Pclk/2 */
+	.caps		= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NEEDS_POLL,
+	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.platform_data		= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+#endif
+
+static struct platform_device *ecovec_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&sh_eth_device,
+	&usb0_host_device,
+	&usb1_common_device,
+	&usbhs_device,
+	&lcdc_device,
+	&gpio_backlight_device,
+	&ceu0_device,
+	&ceu1_device,
+	&keysc_device,
+	&cn12_power,
+#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
+	&sdhi0_power,
+	&sdhi0_device,
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
+	&sdhi1_device,
+#endif
+#else
+	&msiof0_device,
+#endif
+	&camera_devices[0],
+	&camera_devices[1],
+	&camera_devices[2],
+	&fsi_device,
+	&fsi_da7210_device,
+	&irda_device,
+	&vou_device,
+#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
+	&sh_mmcif_device,
+#endif
+};
+
+#ifdef CONFIG_I2C
+#define EEPROM_ADDR 0x50
+static u8 mac_read(struct i2c_adapter *a, u8 command)
+{
+	struct i2c_msg msg[2];
+	u8 buf;
+	int ret;
+
+	msg[0].addr  = EEPROM_ADDR;
+	msg[0].flags = 0;
+	msg[0].len   = 1;
+	msg[0].buf   = &command;
+
+	msg[1].addr  = EEPROM_ADDR;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len   = 1;
+	msg[1].buf   = &buf;
+
+	ret = i2c_transfer(a, msg, 2);
+	if (ret < 0) {
+		printk(KERN_ERR "error %d\n", ret);
+		buf = 0xff;
+	}
+
+	return buf;
+}
+
+static void __init sh_eth_init(struct sh_eth_plat_data *pd)
+{
+	struct i2c_adapter *a = i2c_get_adapter(1);
+	int i;
+
+	if (!a) {
+		pr_err("can not get I2C 1\n");
+		return;
+	}
+
+	/* read MAC address from EEPROM */
+	for (i = 0; i < sizeof(pd->mac_addr); i++) {
+		pd->mac_addr[i] = mac_read(a, 0x10 + i);
+		msleep(10);
+	}
+
+	i2c_put_adapter(a);
+}
+#else
+static void __init sh_eth_init(struct sh_eth_plat_data *pd)
+{
+	pr_err("unable to read sh_eth MAC address\n");
+}
+#endif
+
+#define PORT_HIZA 0xA4050158
+#define IODRIVEA  0xA405018A
+
+extern char ecovec24_sdram_enter_start;
+extern char ecovec24_sdram_enter_end;
+extern char ecovec24_sdram_leave_start;
+extern char ecovec24_sdram_leave_end;
+
+static int __init arch_setup(void)
+{
+	struct clk *clk;
+	bool cn12_enabled = false;
+
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+					SUSP_SH_RSTANDBY,
+					&ecovec24_sdram_enter_start,
+					&ecovec24_sdram_enter_end,
+					&ecovec24_sdram_leave_start,
+					&ecovec24_sdram_leave_end);
+
+	/* enable STATUS0, STATUS2 and PDSTATUS */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+	gpio_request(GPIO_FN_STATUS2, NULL);
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+
+	/* enable SCIFA0 */
+	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
+	gpio_request(GPIO_FN_SCIF0_RXD, NULL);
+
+	/* enable debug LED */
+	gpio_request(GPIO_PTG0, NULL);
+	gpio_request(GPIO_PTG1, NULL);
+	gpio_request(GPIO_PTG2, NULL);
+	gpio_request(GPIO_PTG3, NULL);
+	gpio_direction_output(GPIO_PTG0, 0);
+	gpio_direction_output(GPIO_PTG1, 0);
+	gpio_direction_output(GPIO_PTG2, 0);
+	gpio_direction_output(GPIO_PTG3, 0);
+	__raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
+
+	/* enable SH-Eth */
+	gpio_request(GPIO_PTA1, NULL);
+	gpio_direction_output(GPIO_PTA1, 1);
+	mdelay(20);
+
+	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
+	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
+	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
+	gpio_request(GPIO_FN_MDIO,         NULL);
+	gpio_request(GPIO_FN_MDC,          NULL);
+	gpio_request(GPIO_FN_LNKSTA,       NULL);
+
+	/* enable USB */
+	__raw_writew(0x0000, 0xA4D80000);
+	__raw_writew(0x0000, 0xA4D90000);
+	gpio_request(GPIO_PTB3,  NULL);
+	gpio_request(GPIO_PTB4,  NULL);
+	gpio_request(GPIO_PTB5,  NULL);
+	gpio_direction_input(GPIO_PTB3);
+	gpio_direction_output(GPIO_PTB4, 0);
+	gpio_direction_output(GPIO_PTB5, 0);
+	__raw_writew(0x0600, 0xa40501d4);
+	__raw_writew(0x0600, 0xa4050192);
+
+	if (gpio_get_value(GPIO_PTB3)) {
+		printk(KERN_INFO "USB1 function is selected\n");
+		usb1_common_device.name = "r8a66597_udc";
+	} else {
+		printk(KERN_INFO "USB1 host is selected\n");
+		usb1_common_device.name = "r8a66597_hcd";
+	}
+
+	/* enable LCDC */
+	gpio_request(GPIO_FN_LCDD23,   NULL);
+	gpio_request(GPIO_FN_LCDD22,   NULL);
+	gpio_request(GPIO_FN_LCDD21,   NULL);
+	gpio_request(GPIO_FN_LCDD20,   NULL);
+	gpio_request(GPIO_FN_LCDD19,   NULL);
+	gpio_request(GPIO_FN_LCDD18,   NULL);
+	gpio_request(GPIO_FN_LCDD17,   NULL);
+	gpio_request(GPIO_FN_LCDD16,   NULL);
+	gpio_request(GPIO_FN_LCDD15,   NULL);
+	gpio_request(GPIO_FN_LCDD14,   NULL);
+	gpio_request(GPIO_FN_LCDD13,   NULL);
+	gpio_request(GPIO_FN_LCDD12,   NULL);
+	gpio_request(GPIO_FN_LCDD11,   NULL);
+	gpio_request(GPIO_FN_LCDD10,   NULL);
+	gpio_request(GPIO_FN_LCDD9,    NULL);
+	gpio_request(GPIO_FN_LCDD8,    NULL);
+	gpio_request(GPIO_FN_LCDD7,    NULL);
+	gpio_request(GPIO_FN_LCDD6,    NULL);
+	gpio_request(GPIO_FN_LCDD5,    NULL);
+	gpio_request(GPIO_FN_LCDD4,    NULL);
+	gpio_request(GPIO_FN_LCDD3,    NULL);
+	gpio_request(GPIO_FN_LCDD2,    NULL);
+	gpio_request(GPIO_FN_LCDD1,    NULL);
+	gpio_request(GPIO_FN_LCDD0,    NULL);
+	gpio_request(GPIO_FN_LCDDISP,  NULL);
+	gpio_request(GPIO_FN_LCDHSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDCK,   NULL);
+	gpio_request(GPIO_FN_LCDVSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDON,   NULL);
+	gpio_request(GPIO_FN_LCDLCLK,  NULL);
+	__raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+
+	gpio_request(GPIO_PTE6, NULL);
+	gpio_request(GPIO_PTU1, NULL);
+	gpio_request(GPIO_PTA2, NULL);
+	gpio_direction_input(GPIO_PTE6);
+	gpio_direction_output(GPIO_PTU1, 0);
+	gpio_direction_output(GPIO_PTA2, 0);
+
+	/* I/O buffer drive ability is high */
+	__raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
+
+	if (gpio_get_value(GPIO_PTE6)) {
+		/* DVI */
+		lcdc_info.clock_source			= LCDC_CLK_EXTERNAL;
+		lcdc_info.ch[0].clock_divider		= 1;
+		lcdc_info.ch[0].lcd_modes		= ecovec_dvi_modes;
+		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_dvi_modes);
+
+		/* No backlight */
+		gpio_backlight_data.fbdev = NULL;
+
+		gpio_set_value(GPIO_PTA2, 1);
+		gpio_set_value(GPIO_PTU1, 1);
+	} else {
+		/* Panel */
+		lcdc_info.clock_source			= LCDC_CLK_PERIPHERAL;
+		lcdc_info.ch[0].clock_divider		= 2;
+		lcdc_info.ch[0].lcd_modes		= ecovec_lcd_modes;
+		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_lcd_modes);
+
+		/* FIXME
+		 *
+		 * LCDDON control is needed for Panel,
+		 * but current sh_mobile_lcdc driver doesn't control it.
+		 * It is temporary correspondence
+		 */
+		gpio_request(GPIO_PTF4, NULL);
+		gpio_direction_output(GPIO_PTF4, 1);
+
+		/* enable TouchScreen */
+		i2c_register_board_info(0, &ts_i2c_clients, 1);
+		irq_set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
+	}
+
+	/* enable CEU0 */
+	gpio_request(GPIO_FN_VIO0_D15, NULL);
+	gpio_request(GPIO_FN_VIO0_D14, NULL);
+	gpio_request(GPIO_FN_VIO0_D13, NULL);
+	gpio_request(GPIO_FN_VIO0_D12, NULL);
+	gpio_request(GPIO_FN_VIO0_D11, NULL);
+	gpio_request(GPIO_FN_VIO0_D10, NULL);
+	gpio_request(GPIO_FN_VIO0_D9,  NULL);
+	gpio_request(GPIO_FN_VIO0_D8,  NULL);
+	gpio_request(GPIO_FN_VIO0_D7,  NULL);
+	gpio_request(GPIO_FN_VIO0_D6,  NULL);
+	gpio_request(GPIO_FN_VIO0_D5,  NULL);
+	gpio_request(GPIO_FN_VIO0_D4,  NULL);
+	gpio_request(GPIO_FN_VIO0_D3,  NULL);
+	gpio_request(GPIO_FN_VIO0_D2,  NULL);
+	gpio_request(GPIO_FN_VIO0_D1,  NULL);
+	gpio_request(GPIO_FN_VIO0_D0,  NULL);
+	gpio_request(GPIO_FN_VIO0_VD,  NULL);
+	gpio_request(GPIO_FN_VIO0_CLK, NULL);
+	gpio_request(GPIO_FN_VIO0_FLD, NULL);
+	gpio_request(GPIO_FN_VIO0_HD,  NULL);
+	platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
+
+	/* enable CEU1 */
+	gpio_request(GPIO_FN_VIO1_D7,  NULL);
+	gpio_request(GPIO_FN_VIO1_D6,  NULL);
+	gpio_request(GPIO_FN_VIO1_D5,  NULL);
+	gpio_request(GPIO_FN_VIO1_D4,  NULL);
+	gpio_request(GPIO_FN_VIO1_D3,  NULL);
+	gpio_request(GPIO_FN_VIO1_D2,  NULL);
+	gpio_request(GPIO_FN_VIO1_D1,  NULL);
+	gpio_request(GPIO_FN_VIO1_D0,  NULL);
+	gpio_request(GPIO_FN_VIO1_FLD, NULL);
+	gpio_request(GPIO_FN_VIO1_HD,  NULL);
+	gpio_request(GPIO_FN_VIO1_VD,  NULL);
+	gpio_request(GPIO_FN_VIO1_CLK, NULL);
+	platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
+
+	/* enable KEYSC */
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYOUT3,     NULL);
+	gpio_request(GPIO_FN_KEYOUT2,     NULL);
+	gpio_request(GPIO_FN_KEYOUT1,     NULL);
+	gpio_request(GPIO_FN_KEYOUT0,     NULL);
+	gpio_request(GPIO_FN_KEYIN0,      NULL);
+
+	/* enable user debug switch */
+	gpio_request(GPIO_PTR0, NULL);
+	gpio_request(GPIO_PTR4, NULL);
+	gpio_request(GPIO_PTR5, NULL);
+	gpio_request(GPIO_PTR6, NULL);
+	gpio_direction_input(GPIO_PTR0);
+	gpio_direction_input(GPIO_PTR4);
+	gpio_direction_input(GPIO_PTR5);
+	gpio_direction_input(GPIO_PTR6);
+
+	/* SD-card slot CN11 */
+#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
+	/* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
+	gpio_request(GPIO_FN_SDHI0WP,  NULL);
+	gpio_request(GPIO_FN_SDHI0CMD, NULL);
+	gpio_request(GPIO_FN_SDHI0CLK, NULL);
+	gpio_request(GPIO_FN_SDHI0D3,  NULL);
+	gpio_request(GPIO_FN_SDHI0D2,  NULL);
+	gpio_request(GPIO_FN_SDHI0D1,  NULL);
+	gpio_request(GPIO_FN_SDHI0D0,  NULL);
+#else
+	/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
+	gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
+	gpio_request(GPIO_FN_MSIOF0_RXD, NULL);
+	gpio_request(GPIO_FN_MSIOF0_TSCK, NULL);
+	gpio_request(GPIO_PTM4, NULL); /* software CS control of TSYNC pin */
+	gpio_direction_output(GPIO_PTM4, 1); /* active low CS */
+	gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
+	gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
+
+	spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
+#endif
+
+	/* MMC/SD-card slot CN12 */
+#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
+	/* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
+	gpio_request(GPIO_FN_MMC_D7, NULL);
+	gpio_request(GPIO_FN_MMC_D6, NULL);
+	gpio_request(GPIO_FN_MMC_D5, NULL);
+	gpio_request(GPIO_FN_MMC_D4, NULL);
+	gpio_request(GPIO_FN_MMC_D3, NULL);
+	gpio_request(GPIO_FN_MMC_D2, NULL);
+	gpio_request(GPIO_FN_MMC_D1, NULL);
+	gpio_request(GPIO_FN_MMC_D0, NULL);
+	gpio_request(GPIO_FN_MMC_CLK, NULL);
+	gpio_request(GPIO_FN_MMC_CMD, NULL);
+
+	cn12_enabled = true;
+#elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
+	/* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
+	gpio_request(GPIO_FN_SDHI1WP,  NULL);
+	gpio_request(GPIO_FN_SDHI1CMD, NULL);
+	gpio_request(GPIO_FN_SDHI1CLK, NULL);
+	gpio_request(GPIO_FN_SDHI1D3,  NULL);
+	gpio_request(GPIO_FN_SDHI1D2,  NULL);
+	gpio_request(GPIO_FN_SDHI1D1,  NULL);
+	gpio_request(GPIO_FN_SDHI1D0,  NULL);
+
+	cn12_enabled = true;
+#endif
+
+	if (cn12_enabled)
+		/* I/O buffer drive ability is high for CN12 */
+		__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000,
+			     IODRIVEA);
+
+	/* enable Video */
+	gpio_request(GPIO_PTU2, NULL);
+	gpio_direction_output(GPIO_PTU2, 1);
+
+	/* enable Camera */
+	gpio_request(GPIO_PTA3, NULL);
+	gpio_request(GPIO_PTA4, NULL);
+	gpio_direction_output(GPIO_PTA3, 0);
+	gpio_direction_output(GPIO_PTA4, 0);
+
+	/* enable FSI */
+	gpio_request(GPIO_FN_FSIMCKB,    NULL);
+	gpio_request(GPIO_FN_FSIIBSD,    NULL);
+	gpio_request(GPIO_FN_FSIOBSD,    NULL);
+	gpio_request(GPIO_FN_FSIIBBCK,   NULL);
+	gpio_request(GPIO_FN_FSIIBLRCK,  NULL);
+	gpio_request(GPIO_FN_FSIOBBCK,   NULL);
+	gpio_request(GPIO_FN_FSIOBLRCK,  NULL);
+	gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
+
+	/* set SPU2 clock to 83.4 MHz */
+	clk = clk_get(NULL, "spu_clk");
+	if (!IS_ERR(clk)) {
+		clk_set_rate(clk, clk_round_rate(clk, 83333333));
+		clk_put(clk);
+	}
+
+	/* change parent of FSI B */
+	clk = clk_get(NULL, "fsib_clk");
+	if (!IS_ERR(clk)) {
+		/* 48kHz dummy clock was used to make sure 1/1 divide */
+		clk_set_rate(&sh7724_fsimckb_clk, 48000);
+		clk_set_parent(clk, &sh7724_fsimckb_clk);
+		clk_set_rate(clk, 48000);
+		clk_put(clk);
+	}
+
+	gpio_request(GPIO_PTU0, NULL);
+	gpio_direction_output(GPIO_PTU0, 0);
+	mdelay(20);
+
+	/* enable motion sensor */
+	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+	gpio_direction_input(GPIO_FN_INTC_IRQ1);
+
+	/* set VPU clock to 166 MHz */
+	clk = clk_get(NULL, "vpu_clk");
+	if (!IS_ERR(clk)) {
+		clk_set_rate(clk, clk_round_rate(clk, 166000000));
+		clk_put(clk);
+	}
+
+	/* enable IrDA */
+	gpio_request(GPIO_FN_IRDA_OUT, NULL);
+	gpio_request(GPIO_FN_IRDA_IN,  NULL);
+	gpio_request(GPIO_PTU5, NULL);
+	gpio_direction_output(GPIO_PTU5, 0);
+
+	/* enable I2C device */
+	i2c_register_board_info(0, i2c0_devices,
+				ARRAY_SIZE(i2c0_devices));
+
+	i2c_register_board_info(1, i2c1_devices,
+				ARRAY_SIZE(i2c1_devices));
+
+#if defined(CONFIG_VIDEO_SH_VOU) || defined(CONFIG_VIDEO_SH_VOU_MODULE)
+	/* VOU */
+	gpio_request(GPIO_FN_DV_D15, NULL);
+	gpio_request(GPIO_FN_DV_D14, NULL);
+	gpio_request(GPIO_FN_DV_D13, NULL);
+	gpio_request(GPIO_FN_DV_D12, NULL);
+	gpio_request(GPIO_FN_DV_D11, NULL);
+	gpio_request(GPIO_FN_DV_D10, NULL);
+	gpio_request(GPIO_FN_DV_D9, NULL);
+	gpio_request(GPIO_FN_DV_D8, NULL);
+	gpio_request(GPIO_FN_DV_CLKI, NULL);
+	gpio_request(GPIO_FN_DV_CLK, NULL);
+	gpio_request(GPIO_FN_DV_VSYNC, NULL);
+	gpio_request(GPIO_FN_DV_HSYNC, NULL);
+
+	/* AK8813 power / reset sequence */
+	gpio_request(GPIO_PTG4, NULL);
+	gpio_request(GPIO_PTU3, NULL);
+	/* Reset */
+	gpio_direction_output(GPIO_PTG4, 0);
+	/* Power down */
+	gpio_direction_output(GPIO_PTU3, 1);
+
+	udelay(10);
+
+	/* Power up, reset */
+	gpio_set_value(GPIO_PTU3, 0);
+
+	udelay(10);
+
+	/* Remove reset */
+	gpio_set_value(GPIO_PTG4, 1);
+#endif
+
+	return platform_add_devices(ecovec_devices,
+				    ARRAY_SIZE(ecovec_devices));
+}
+arch_initcall(arch_setup);
+
+static int __init devices_setup(void)
+{
+	sh_eth_init(&sh_eth_plat);
+	return 0;
+}
+device_initcall(devices_setup);
+
+static struct sh_machine_vector mv_ecovec __initmv = {
+	.mv_name	= "R0P7724 (EcoVec)",
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/Kconfig b/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/Kconfig
new file mode 100644
index 0000000..b0abd03
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/Kconfig
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0
+if SH_HIGHLANDER
+
+choice
+	prompt "Highlander options"
+	default SH_R7780MP
+
+config SH_R7780RP
+	bool "R7780RP-1 board support"
+	depends on CPU_SUBTYPE_SH7780
+
+config SH_R7780MP
+	bool "R7780MP board support"
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  Selecting this option will enable support for the mass-production
+	  version of the R7780RP. If in doubt, say Y.
+
+config SH_R7785RP
+	bool "R7785RP board support"
+	depends on CPU_SUBTYPE_SH7785
+	select GPIOLIB
+
+endchoice
+
+endif
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/Makefile
new file mode 100644
index 0000000..880ed68
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Highlander specific parts of the kernel
+#
+obj-y				:= setup.o
+obj-$(CONFIG_SH_R7780RP)	+= irq-r7780rp.o
+obj-$(CONFIG_SH_R7780MP)	+= irq-r7780mp.o
+obj-$(CONFIG_SH_R7785RP)	+= irq-r7785rp.o pinmux-r7785rp.o
+
+ifneq ($(CONFIG_SH_R7785RP),y)
+obj-$(CONFIG_PUSH_SWITCH)	+= psw.o
+endif
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/irq-r7780mp.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/irq-r7780mp.c
new file mode 100644
index 0000000..9893fd3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/irq-r7780mp.c
@@ -0,0 +1,74 @@
+/*
+ * Renesas Solutions Highlander R7780MP Support.
+ *
+ * Copyright (C) 2002  Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2006  Paul Mundt
+ * Copyright (C) 2007  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/highlander.h>
+
+enum {
+	UNUSED = 0,
+
+	/* board specific interrupt sources */
+	CF,		/* Compact Flash */
+	TP,		/* Touch panel */
+	SCIF1,		/* FPGA SCIF1 */
+	SCIF0,		/* FPGA SCIF0 */
+	SMBUS,		/* SMBUS */
+	RTC,		/* RTC Alarm */
+	AX88796,	/* Ethernet controller */
+	PSW,		/* Push Switch */
+
+	/* external bus connector */
+	EXT1, EXT2, EXT4, EXT5, EXT6,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(CF, IRQ_CF),
+	INTC_IRQ(TP, IRQ_TP),
+	INTC_IRQ(SCIF1, IRQ_SCIF1),
+	INTC_IRQ(SCIF0, IRQ_SCIF0),
+	INTC_IRQ(SMBUS, IRQ_SMBUS),
+	INTC_IRQ(RTC, IRQ_RTC),
+	INTC_IRQ(AX88796, IRQ_AX88796),
+	INTC_IRQ(PSW, IRQ_PSW),
+
+	INTC_IRQ(EXT1, IRQ_EXT1), INTC_IRQ(EXT2, IRQ_EXT2),
+	INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5),
+	INTC_IRQ(EXT6, IRQ_EXT6),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa4000000, 0, 16, /* IRLMSK */
+	  { SCIF0, SCIF1, RTC, 0, CF, 0, TP, SMBUS,
+	    0, EXT6, EXT5, EXT4, EXT2, EXT1, PSW, AX88796 } },
+};
+
+static unsigned char irl2irq[HL_NR_IRL] __initdata = {
+	0, IRQ_CF, IRQ_TP, IRQ_SCIF1,
+	IRQ_SCIF0, IRQ_SMBUS, IRQ_RTC, IRQ_EXT6,
+	IRQ_EXT5, IRQ_EXT4, IRQ_EXT2, IRQ_EXT1,
+	0, IRQ_AX88796, IRQ_PSW,
+};
+
+static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors,
+			 NULL, mask_registers, NULL, NULL);
+
+unsigned char * __init highlander_plat_irq_setup(void)
+{
+	if ((__raw_readw(0xa4000700) & 0xf000) == 0x2000) {
+		printk(KERN_INFO "Using r7780mp interrupt controller.\n");
+		register_intc_controller(&intc_desc);
+		return irl2irq;
+	}
+
+	return NULL;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/irq-r7780rp.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/irq-r7780rp.c
new file mode 100644
index 0000000..0805b21
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/irq-r7780rp.c
@@ -0,0 +1,67 @@
+/*
+ * Renesas Solutions Highlander R7780RP-1 Support.
+ *
+ * Copyright (C) 2002  Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2006  Paul Mundt
+ * Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/highlander.h>
+
+enum {
+	UNUSED = 0,
+
+	/* board specific interrupt sources */
+
+	AX88796,          /* Ethernet controller */
+	PSW,              /* Push Switch */
+	CF,               /* Compact Flash */
+
+	PCI_A,
+	PCI_B,
+	PCI_C,
+	PCI_D,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(PCI_A, 65), /* dirty: overwrite cpu vectors for pci */
+	INTC_IRQ(PCI_B, 66),
+	INTC_IRQ(PCI_C, 67),
+	INTC_IRQ(PCI_D, 68),
+	INTC_IRQ(CF, IRQ_CF),
+	INTC_IRQ(PSW, IRQ_PSW),
+	INTC_IRQ(AX88796, IRQ_AX88796),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa5000000, 0, 16, /* IRLMSK */
+	  { PCI_A, PCI_B, PCI_C, PCI_D, CF, 0, 0, 0,
+	    0, 0, 0, 0, 0, 0, PSW, AX88796 } },
+};
+
+static unsigned char irl2irq[HL_NR_IRL] __initdata = {
+	65, 66, 67, 68,
+	IRQ_CF, 0, 0, 0,
+	0, 0, 0, 0,
+	IRQ_AX88796, IRQ_PSW
+};
+
+static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors,
+			 NULL, mask_registers, NULL, NULL);
+
+unsigned char * __init highlander_plat_irq_setup(void)
+{
+	if (__raw_readw(0xa5000600)) {
+		printk(KERN_INFO "Using r7780rp interrupt controller.\n");
+		register_intc_controller(&intc_desc);
+		return irl2irq;
+	}
+
+	return NULL;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/irq-r7785rp.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/irq-r7785rp.c
new file mode 100644
index 0000000..558b248
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/irq-r7785rp.c
@@ -0,0 +1,86 @@
+/*
+ * Renesas Solutions Highlander R7785RP Support.
+ *
+ * Copyright (C) 2002  Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2006 - 2008  Paul Mundt
+ * Copyright (C) 2007  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/highlander.h>
+
+enum {
+	UNUSED = 0,
+
+	/* FPGA specific interrupt sources */
+	CF,		/* Compact Flash */
+	SMBUS,		/* SMBUS */
+	TP,		/* Touch panel */
+	RTC,		/* RTC Alarm */
+	TH_ALERT,	/* Temperature sensor */
+	AX88796,	/* Ethernet controller */
+
+	/* external bus connector */
+	EXT0, EXT1, EXT2, EXT3, EXT4, EXT5, EXT6, EXT7,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(CF, IRQ_CF),
+	INTC_IRQ(SMBUS, IRQ_SMBUS),
+	INTC_IRQ(TP, IRQ_TP),
+	INTC_IRQ(RTC, IRQ_RTC),
+	INTC_IRQ(TH_ALERT, IRQ_TH_ALERT),
+
+	INTC_IRQ(EXT0, IRQ_EXT0), INTC_IRQ(EXT1, IRQ_EXT1),
+	INTC_IRQ(EXT2, IRQ_EXT2), INTC_IRQ(EXT3, IRQ_EXT3),
+
+	INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5),
+	INTC_IRQ(EXT6, IRQ_EXT6), INTC_IRQ(EXT7, IRQ_EXT7),
+
+	INTC_IRQ(AX88796, IRQ_AX88796),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa4000010, 0, 16, /* IRLMCR1 */
+	  { 0, 0, 0, 0, CF, AX88796, SMBUS, TP,
+	    RTC, 0, TH_ALERT, 0, 0, 0, 0, 0 } },
+	{ 0xa4000012, 0, 16, /* IRLMCR2 */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    EXT7, EXT6, EXT5, EXT4, EXT3, EXT2, EXT1, EXT0 } },
+};
+
+static unsigned char irl2irq[HL_NR_IRL] __initdata = {
+	0, IRQ_CF, IRQ_EXT4, IRQ_EXT5,
+	IRQ_EXT6, IRQ_EXT7, IRQ_SMBUS, IRQ_TP,
+	IRQ_RTC, IRQ_TH_ALERT, IRQ_AX88796, IRQ_EXT0,
+	IRQ_EXT1, IRQ_EXT2, IRQ_EXT3,
+};
+
+static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors,
+			 NULL, mask_registers, NULL, NULL);
+
+unsigned char * __init highlander_plat_irq_setup(void)
+{
+	if ((__raw_readw(0xa4000158) & 0xf000) != 0x1000)
+		return NULL;
+
+	printk(KERN_INFO "Using r7785rp interrupt controller.\n");
+
+	__raw_writew(0x0000, PA_IRLSSR1);	/* FPGA IRLSSR1(CF_CD clear) */
+
+	/* Setup the FPGA IRL */
+	__raw_writew(0x0000, PA_IRLPRA);	/* FPGA IRLA */
+	__raw_writew(0xe598, PA_IRLPRB);	/* FPGA IRLB */
+	__raw_writew(0x7060, PA_IRLPRC);	/* FPGA IRLC */
+	__raw_writew(0x0000, PA_IRLPRD);	/* FPGA IRLD */
+	__raw_writew(0x4321, PA_IRLPRE);	/* FPGA IRLE */
+	__raw_writew(0xdcba, PA_IRLPRF);	/* FPGA IRLF */
+
+	register_intc_controller(&intc_desc);
+	return irl2irq;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/pinmux-r7785rp.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
new file mode 100644
index 0000000..c77a2be
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <cpu/sh7785.h>
+
+void __init highlander_plat_pinmux_setup(void)
+{
+	/* SCIF0 */
+	gpio_request(GPIO_FN_SCIF0_CTS, NULL);
+	gpio_request(GPIO_FN_SCIF0_RTS, NULL);
+	gpio_request(GPIO_FN_SCIF0_SCK, NULL);
+	gpio_request(GPIO_FN_SCIF0_RXD, NULL);
+	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/psw.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/psw.c
new file mode 100644
index 0000000..40e2b58
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/psw.c
@@ -0,0 +1,122 @@
+/*
+ * arch/sh/boards/renesas/r7780rp/psw.c
+ *
+ * push switch support for RDBRP-1/RDBREVRP-1 debug boards.
+ *
+ * Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <mach/highlander.h>
+#include <asm/push-switch.h>
+
+static irqreturn_t psw_irq_handler(int irq, void *arg)
+{
+	struct platform_device *pdev = arg;
+	struct push_switch *psw = platform_get_drvdata(pdev);
+	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+	unsigned int l, mask;
+	int ret = 0;
+
+	l = __raw_readw(PA_DBSW);
+
+	/* Nothing to do if there's no state change */
+	if (psw->state) {
+		ret = 1;
+		goto out;
+	}
+
+	mask = l & 0x70;
+	/* Figure out who raised it */
+	if (mask & (1 << psw_info->bit)) {
+		psw->state = !!(mask & (1 << psw_info->bit));
+		if (psw->state)	/* debounce */
+			mod_timer(&psw->debounce, jiffies + 50);
+
+		ret = 1;
+	}
+
+out:
+	/* Clear the switch IRQs */
+	l |= (0x7 << 12);
+	__raw_writew(l, PA_DBSW);
+
+	return IRQ_RETVAL(ret);
+}
+
+static struct resource psw_resources[] = {
+	[0] = {
+		.start	= IRQ_PSW,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct push_switch_platform_info s2_platform_data = {
+	.name		= "s2",
+	.bit		= 6,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s2_switch_device = {
+	.name		= "push-switch",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s2_platform_data,
+	},
+};
+
+static struct push_switch_platform_info s3_platform_data = {
+	.name		= "s3",
+	.bit		= 5,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s3_switch_device = {
+	.name		= "push-switch",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s3_platform_data,
+	},
+};
+
+static struct push_switch_platform_info s4_platform_data = {
+	.name		= "s4",
+	.bit		= 4,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s4_switch_device = {
+	.name		= "push-switch",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s4_platform_data,
+	},
+};
+
+static struct platform_device *psw_devices[] = {
+	&s2_switch_device, &s3_switch_device, &s4_switch_device,
+};
+
+static int __init psw_init(void)
+{
+	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
+}
+module_init(psw_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/setup.c
new file mode 100644
index 0000000..4a52590
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-highlander/setup.c
@@ -0,0 +1,419 @@
+/*
+ * arch/sh/boards/renesas/r7780rp/setup.c
+ *
+ * Renesas Solutions Highlander Support.
+ *
+ * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2005 - 2008 Paul Mundt
+ *
+ * This contains support for the R7780RP-1, R7780MP, and R7785RP
+ * Highlander modules.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/types.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/usb/m66592.h>
+#include <linux/clkdev.h>
+#include <net/ax88796.h>
+#include <asm/machvec.h>
+#include <mach/highlander.h>
+#include <asm/clock.h>
+#include <asm/heartbeat.h>
+#include <asm/io.h>
+#include <asm/io_trapped.h>
+
+static struct r8a66597_platdata r8a66597_data = {
+	.xtal = R8A66597_PLATDATA_XTAL_12MHZ,
+	.vif = 1,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.start	= 0xA4200000,
+		.end	= 0xA42000FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_EXT1,		/* irq number */
+		.end	= IRQ_EXT1,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,		/* don't use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct m66592_platdata usbf_platdata = {
+	.xtal = M66592_PLATDATA_XTAL_24MHZ,
+	.vif = 1,
+};
+
+static struct resource m66592_usb_peripheral_resources[] = {
+	[0] = {
+		.name	= "m66592_udc",
+		.start	= 0xb0000000,
+		.end	= 0xb00000FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "m66592_udc",
+		.start	= IRQ_EXT4,		/* irq number */
+		.end	= IRQ_EXT4,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m66592_usb_peripheral_device = {
+	.name		= "m66592_udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,		/* don't use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbf_platdata,
+	},
+	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
+	.resource	= m66592_usb_peripheral_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start	= PA_AREA5_IO + 0x1000,
+		.end	= PA_AREA5_IO + 0x1000 + 0x08 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PA_AREA5_IO + 0x80c,
+		.end	= PA_AREA5_IO + 0x80c + 0x16 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_CF,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct pata_platform_info pata_info = {
+	.ioport_shift	= 1,
+};
+
+static struct platform_device cf_ide_device  = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+	.dev	= {
+		.platform_data	= &pata_info,
+	},
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_OBLED,
+		.end	= PA_OBLED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+#ifndef CONFIG_SH_R7785RP
+static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+#endif
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+
+	/* R7785RP has a slightly more sensible FPGA.. */
+#ifndef CONFIG_SH_R7785RP
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+#endif
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct ax_plat_data ax88796_platdata = {
+	.flags          = AXFLG_HAS_93CX6,
+	.wordlength     = 2,
+	.dcr_val        = 0x1,
+	.rcr_val        = 0x40,
+};
+
+static struct resource ax88796_resources[] = {
+	{
+#ifdef CONFIG_SH_R7780RP
+		.start  = 0xa5800400,
+		.end    = 0xa5800400 + (0x20 * 0x2) - 1,
+#else
+		.start  = 0xa4100400,
+		.end    = 0xa4100400 + (0x20 * 0x2) - 1,
+#endif
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.start  = IRQ_AX88796,
+		.end    = IRQ_AX88796,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ax88796_device = {
+	.name           = "ax88796",
+	.id             = 0,
+
+	.dev    = {
+		.platform_data = &ax88796_platdata,
+	},
+
+	.num_resources  = ARRAY_SIZE(ax88796_resources),
+	.resource       = ax88796_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 4,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+/* This config is flash board for mass production. */
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= PA_NORFLASH_ADDR,
+		.end	= PA_NORFLASH_ADDR + PA_NORFLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct resource smbus_resources[] = {
+	[0] = {
+		.start	= PA_SMCR,
+		.end	= PA_SMCR + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SMBUS,
+		.end	= IRQ_SMBUS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smbus_device = {
+	.name		= "i2c-highlander",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smbus_resources),
+	.resource	= smbus_resources,
+};
+
+static struct i2c_board_info __initdata highlander_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+};
+
+static struct platform_device *r7780rp_devices[] __initdata = {
+	&r8a66597_usb_host_device,
+	&m66592_usb_peripheral_device,
+	&heartbeat_device,
+	&smbus_device,
+	&nor_flash_device,
+#ifndef CONFIG_SH_R7780RP
+	&ax88796_device,
+#endif
+};
+
+/*
+ * The CF is connected using a 16-bit bus where 8-bit operations are
+ * unsupported. The linux ata driver is however using 8-bit operations, so
+ * insert a trapped io filter to convert 8-bit operations into 16-bit.
+ */
+static struct trapped_io cf_trapped_io = {
+	.resource		= cf_ide_resources,
+	.num_resources		= 2,
+	.minimum_bus_width	= 16,
+};
+
+static int __init r7780rp_devices_setup(void)
+{
+	int ret = 0;
+
+#ifndef CONFIG_SH_R7780RP
+	if (register_trapped_io(&cf_trapped_io) == 0)
+		ret |= platform_device_register(&cf_ide_device);
+#endif
+
+	ret |= platform_add_devices(r7780rp_devices,
+				    ARRAY_SIZE(r7780rp_devices));
+
+	ret |= i2c_register_board_info(0, highlander_i2c_devices,
+				       ARRAY_SIZE(highlander_i2c_devices));
+
+	return ret;
+}
+device_initcall(r7780rp_devices_setup);
+
+/*
+ * Platform specific clocks
+ */
+static int ivdr_clk_enable(struct clk *clk)
+{
+	__raw_writew(__raw_readw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
+	return 0;
+}
+
+static void ivdr_clk_disable(struct clk *clk)
+{
+	__raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
+}
+
+static struct sh_clk_ops ivdr_clk_ops = {
+	.enable		= ivdr_clk_enable,
+	.disable	= ivdr_clk_disable,
+};
+
+static struct clk ivdr_clk = {
+	.ops		= &ivdr_clk_ops,
+};
+
+static struct clk *r7780rp_clocks[] = {
+	&ivdr_clk,
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("ivdr_clk", &ivdr_clk),
+};
+
+static void r7780rp_power_off(void)
+{
+	if (mach_is_r7780mp() || mach_is_r7785rp())
+		__raw_writew(0x0001, PA_POFF);
+}
+
+/*
+ * Initialize the board
+ */
+static void __init highlander_setup(char **cmdline_p)
+{
+	u16 ver = __raw_readw(PA_VERREG);
+	int i;
+
+	printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
+			 mach_is_r7780rp() ? "R7780RP-1" :
+			 mach_is_r7780mp() ? "R7780MP"	 :
+					     "R7785RP");
+
+	printk(KERN_INFO "Board version: %d (revision %d), "
+			 "FPGA version: %d (revision %d)\n",
+			 (ver >> 12) & 0xf, (ver >> 8) & 0xf,
+			 (ver >>  4) & 0xf, ver & 0xf);
+
+	highlander_plat_pinmux_setup();
+
+	/*
+	 * Enable the important clocks right away..
+	 */
+	for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) {
+		struct clk *clk = r7780rp_clocks[i];
+
+		clk_register(clk);
+		clk_enable(clk);
+	}
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	__raw_writew(0x0000, PA_OBLED);	/* Clear LED. */
+
+	if (mach_is_r7780rp())
+		__raw_writew(0x0001, PA_SDPOW);	/* SD Power ON */
+
+	__raw_writew(__raw_readw(PA_IVDRCTL) | 0x01, PA_IVDRCTL);	/* Si13112 */
+
+	pm_power_off = r7780rp_power_off;
+}
+
+static unsigned char irl2irq[HL_NR_IRL];
+
+static int highlander_irq_demux(int irq)
+{
+	if (irq >= HL_NR_IRL || irq < 0 || !irl2irq[irq])
+		return irq;
+
+	return irl2irq[irq];
+}
+
+static void __init highlander_init_irq(void)
+{
+	unsigned char *ucp = highlander_plat_irq_setup();
+
+	if (ucp) {
+		plat_irq_setup_pins(IRQ_MODE_IRL3210);
+		memcpy(irl2irq, ucp, HL_NR_IRL);
+	}
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_highlander __initmv = {
+	.mv_name		= "Highlander",
+	.mv_setup		= highlander_setup,
+	.mv_init_irq		= highlander_init_irq,
+	.mv_irq_demux		= highlander_irq_demux,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-hp6xx/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-hp6xx/Makefile
new file mode 100644
index 0000000..b312427
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-hp6xx/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the HP6xx specific parts of the kernel
+#
+
+obj-y			:= setup.o
+obj-$(CONFIG_PM)	+= pm.o pm_wakeup.o
+obj-$(CONFIG_APM_EMULATION)	+= hp6xx_apm.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
new file mode 100644
index 0000000..865d8d6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
@@ -0,0 +1,111 @@
+/*
+ * bios-less APM driver for hp680
+ *
+ * Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com>
+ * Copyright 2008 (c) Kristoffer Ericson <kristoffer.ericson@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/apm-emulation.h>
+#include <linux/io.h>
+#include <asm/adc.h>
+#include <mach/hp6xx.h>
+
+/* percentage values */
+#define APM_CRITICAL			10
+#define APM_LOW				30
+
+/* resonably sane values */
+#define HP680_BATTERY_MAX		898
+#define HP680_BATTERY_MIN		486
+#define HP680_BATTERY_AC_ON		1023
+
+#define MODNAME "hp6x0_apm"
+
+#define PGDR	0xa400012c
+
+static void hp6x0_apm_get_power_status(struct apm_power_info *info)
+{
+	int battery, backup, charging, percentage;
+	u8 pgdr;
+
+	battery		= adc_single(ADC_CHANNEL_BATTERY);
+	backup		= adc_single(ADC_CHANNEL_BACKUP);
+	charging	= adc_single(ADC_CHANNEL_CHARGE);
+
+	percentage = 100 * (battery - HP680_BATTERY_MIN) /
+			   (HP680_BATTERY_MAX - HP680_BATTERY_MIN);
+
+	/* % of full battery */
+	info->battery_life = percentage;
+
+	/* We want our estimates in minutes */
+	info->units = 0;
+
+	/* Extremely(!!) rough estimate, we will replace this with a datalist later on */
+	info->time = (2 * battery);
+
+	info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ?
+			 APM_AC_ONLINE : APM_AC_OFFLINE;
+
+	pgdr = __raw_readb(PGDR);
+	if (pgdr & PGDR_MAIN_BATTERY_OUT) {
+		info->battery_status	= APM_BATTERY_STATUS_NOT_PRESENT;
+		info->battery_flag	= 0x80;
+	} else if (charging < 8) {
+		info->battery_status	= APM_BATTERY_STATUS_CHARGING;
+		info->battery_flag	= 0x08;
+		info->ac_line_status	= 0x01;
+	} else if (percentage <= APM_CRITICAL) {
+		info->battery_status	= APM_BATTERY_STATUS_CRITICAL;
+		info->battery_flag	= 0x04;
+	} else if (percentage <= APM_LOW) {
+		info->battery_status	= APM_BATTERY_STATUS_LOW;
+		info->battery_flag	= 0x02;
+	} else {
+		info->battery_status	= APM_BATTERY_STATUS_HIGH;
+		info->battery_flag	= 0x01;
+	}
+}
+
+static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev)
+{
+	if (!APM_DISABLED)
+		apm_queue_event(APM_USER_SUSPEND);
+
+	return IRQ_HANDLED;
+}
+
+static int __init hp6x0_apm_init(void)
+{
+	int ret;
+
+	ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt,
+			  0, MODNAME, NULL);
+	if (unlikely(ret < 0)) {
+		printk(KERN_ERR MODNAME ": IRQ %d request failed\n",
+		       HP680_BTN_IRQ);
+		return ret;
+	}
+
+	apm_get_power_status = hp6x0_apm_get_power_status;
+
+	return ret;
+}
+
+static void __exit hp6x0_apm_exit(void)
+{
+	free_irq(HP680_BTN_IRQ, 0);
+}
+
+module_init(hp6x0_apm_init);
+module_exit(hp6x0_apm_exit);
+
+MODULE_AUTHOR("Adriy Skulysh");
+MODULE_DESCRIPTION("hp6xx Advanced Power Management");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-hp6xx/pm.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-hp6xx/pm.c
new file mode 100644
index 0000000..8b50cf7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-hp6xx/pm.c
@@ -0,0 +1,158 @@
+/*
+ * hp6x0 Power Management Routines
+ *
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/gfp.h>
+#include <asm/io.h>
+#include <asm/hd64461.h>
+#include <asm/bl_bit.h>
+#include <mach/hp6xx.h>
+#include <cpu/dac.h>
+#include <asm/freq.h>
+#include <asm/watchdog.h>
+
+#define INTR_OFFSET	0x600
+
+#define STBCR		0xffffff82
+#define STBCR2		0xffffff88
+
+#define STBCR_STBY	0x80
+#define STBCR_MSTP2	0x04
+
+#define MCR		0xffffff68
+#define RTCNT		0xffffff70
+
+#define MCR_RMODE	2
+#define MCR_RFSH	4
+
+extern u8 wakeup_start;
+extern u8 wakeup_end;
+
+static void pm_enter(void)
+{
+	u8 stbcr, csr;
+	u16 frqcr, mcr;
+	u32 vbr_new, vbr_old;
+
+	set_bl_bit();
+
+	/* set wdt */
+	csr = sh_wdt_read_csr();
+	csr &= ~WTCSR_TME;
+	csr |= WTCSR_CKS_4096;
+	sh_wdt_write_csr(csr);
+	csr = sh_wdt_read_csr();
+	sh_wdt_write_cnt(0);
+
+	/* disable PLL1 */
+	frqcr = __raw_readw(FRQCR);
+	frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY);
+	__raw_writew(frqcr, FRQCR);
+
+	/* enable standby */
+	stbcr = __raw_readb(STBCR);
+	__raw_writeb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
+
+	/* set self-refresh */
+	mcr = __raw_readw(MCR);
+	__raw_writew(mcr & ~MCR_RFSH, MCR);
+
+	/* set interrupt handler */
+	asm volatile("stc vbr, %0" : "=r" (vbr_old));
+	vbr_new = get_zeroed_page(GFP_ATOMIC);
+	udelay(50);
+	memcpy((void*)(vbr_new + INTR_OFFSET),
+	       &wakeup_start, &wakeup_end - &wakeup_start);
+	asm volatile("ldc %0, vbr" : : "r" (vbr_new));
+
+	__raw_writew(0, RTCNT);
+	__raw_writew(mcr | MCR_RFSH | MCR_RMODE, MCR);
+
+	cpu_sleep();
+
+	asm volatile("ldc %0, vbr" : : "r" (vbr_old));
+
+	free_page(vbr_new);
+
+	/* enable PLL1 */
+	frqcr = __raw_readw(FRQCR);
+	frqcr |= FRQCR_PSTBY;
+	__raw_writew(frqcr, FRQCR);
+	udelay(50);
+	frqcr |= FRQCR_PLLEN;
+	__raw_writew(frqcr, FRQCR);
+
+	__raw_writeb(stbcr, STBCR);
+
+	clear_bl_bit();
+}
+
+static int hp6x0_pm_enter(suspend_state_t state)
+{
+	u8 stbcr, stbcr2;
+#ifdef CONFIG_HD64461_ENABLER
+	u8 scr;
+	u16 hd64461_stbcr;
+#endif
+
+#ifdef CONFIG_HD64461_ENABLER
+	outb(0, HD64461_PCC1CSCIER);
+
+	scr = inb(HD64461_PCC1SCR);
+	scr |= HD64461_PCCSCR_VCC1;
+	outb(scr, HD64461_PCC1SCR);
+
+	hd64461_stbcr = inw(HD64461_STBCR);
+	hd64461_stbcr |= HD64461_STBCR_SPC1ST;
+	outw(hd64461_stbcr, HD64461_STBCR);
+#endif
+
+	__raw_writeb(0x1f, DACR);
+
+	stbcr = __raw_readb(STBCR);
+	__raw_writeb(0x01, STBCR);
+
+	stbcr2 = __raw_readb(STBCR2);
+	__raw_writeb(0x7f , STBCR2);
+
+	outw(0xf07f, HD64461_SCPUCR);
+
+	pm_enter();
+
+	outw(0, HD64461_SCPUCR);
+	__raw_writeb(stbcr, STBCR);
+	__raw_writeb(stbcr2, STBCR2);
+
+#ifdef CONFIG_HD64461_ENABLER
+	hd64461_stbcr = inw(HD64461_STBCR);
+	hd64461_stbcr &= ~HD64461_STBCR_SPC1ST;
+	outw(hd64461_stbcr, HD64461_STBCR);
+
+	outb(0x4c, HD64461_PCC1CSCIER);
+	outb(0x00, HD64461_PCC1CSCR);
+#endif
+
+	return 0;
+}
+
+static const struct platform_suspend_ops hp6x0_pm_ops = {
+	.enter		= hp6x0_pm_enter,
+	.valid		= suspend_valid_only_mem,
+};
+
+static int __init hp6x0_pm_init(void)
+{
+	suspend_set_ops(&hp6x0_pm_ops);
+	return 0;
+}
+
+late_initcall(hp6x0_pm_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-hp6xx/pm_wakeup.S b/src/kernel/linux/v4.14/arch/sh/boards/mach-hp6xx/pm_wakeup.S
new file mode 100644
index 0000000..4f18d44
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-hp6xx/pm_wakeup.S
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <cpu/mmu_context.h>
+
+/*
+ * Kernel mode register usage:
+ *	k0	scratch
+ *	k1	scratch
+ * For more details, please have a look at entry.S
+ */
+
+#define k0	r0
+#define k1	r1
+
+ENTRY(wakeup_start)
+! clear STBY bit
+	mov	#-126, k1
+   	and	#127, k0
+	mov.b	k0, @k1
+! enable refresh
+	mov.l	5f, k1
+	mov.w	6f, k0
+  	mov.w	k0, @k1
+! jump to handler
+	mov.l	4f, k1
+	jmp	@k1
+	 nop
+
+	.align	2
+4:	.long	handle_interrupt
+5:	.long	0xffffff68
+6:	.word	0x0524
+
+ENTRY(wakeup_end)
+	nop
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-hp6xx/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-hp6xx/setup.c
new file mode 100644
index 0000000..05797b3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-hp6xx/setup.c
@@ -0,0 +1,174 @@
+/*
+ * linux/arch/sh/boards/hp6xx/setup.c
+ *
+ * Copyright (C) 2002 Andriy Skulysh
+ * Copyright (C) 2007 Kristoffer Ericson <Kristoffer_e1@hotmail.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only)
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/sh_intc.h>
+#include <sound/sh_dac_audio.h>
+#include <asm/hd64461.h>
+#include <asm/io.h>
+#include <mach/hp6xx.h>
+#include <cpu/dac.h>
+
+#define	SCPCR	0xa4000116
+#define	SCPDR	0xa4000136
+
+/* CF Slot */
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start = 0x15000000 + 0x1f0,
+		.end   = 0x15000000 + 0x1f0 + 0x08 - 0x01,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 0x15000000 + 0x1fe,
+		.end   = 0x15000000 + 0x1fe + 0x01,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = evt2irq(0xba0),
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		=  "pata_platform",
+	.id		=  -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct platform_device jornadakbd_device = {
+	.name		= "jornada680_kbd",
+	.id		= -1,
+};
+
+static void dac_audio_start(struct dac_audio_pdata *pdata)
+{
+	u16 v;
+	u8 v8;
+
+	/* HP Jornada 680/690 speaker on */
+	v = inw(HD64461_GPADR);
+	v &= ~HD64461_GPADR_SPEAKER;
+	outw(v, HD64461_GPADR);
+
+	/* HP Palmtop 620lx/660lx speaker on */
+	v8 = inb(PKDR);
+	v8 &= ~PKDR_SPEAKER;
+	outb(v8, PKDR);
+
+	sh_dac_enable(pdata->channel);
+}
+
+static void dac_audio_stop(struct dac_audio_pdata *pdata)
+{
+	u16 v;
+	u8 v8;
+
+	/* HP Jornada 680/690 speaker off */
+	v = inw(HD64461_GPADR);
+	v |= HD64461_GPADR_SPEAKER;
+	outw(v, HD64461_GPADR);
+
+	/* HP Palmtop 620lx/660lx speaker off */
+	v8 = inb(PKDR);
+	v8 |= PKDR_SPEAKER;
+	outb(v8, PKDR);
+
+	sh_dac_output(0, pdata->channel);
+	sh_dac_disable(pdata->channel);
+}
+
+static struct dac_audio_pdata dac_audio_platform_data = {
+	.buffer_size		= 64000,
+	.channel		= 1,
+	.start			= dac_audio_start,
+	.stop			= dac_audio_stop,
+};
+
+static struct platform_device dac_audio_device = {
+	.name		= "dac_audio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &dac_audio_platform_data,
+	}
+
+};
+
+static struct platform_device *hp6xx_devices[] __initdata = {
+	&cf_ide_device,
+	&jornadakbd_device,
+	&dac_audio_device,
+};
+
+static void __init hp6xx_init_irq(void)
+{
+	/* Gets touchscreen and powerbutton IRQ working */
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+static int __init hp6xx_devices_setup(void)
+{
+	return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
+}
+
+static void __init hp6xx_setup(char **cmdline_p)
+{
+	u8 v8;
+	u16 v;
+
+	v = inw(HD64461_STBCR);
+	v |=	HD64461_STBCR_SURTST | HD64461_STBCR_SIRST	|
+		HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST	|
+		HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST	|
+		HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST|
+		HD64461_STBCR_SAFECKE_IST;
+#ifndef CONFIG_HD64461_ENABLER
+	v |= HD64461_STBCR_SPC1ST;
+#endif
+	outw(v, HD64461_STBCR);
+	v = inw(HD64461_GPADR);
+	v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0;
+	outw(v, HD64461_GPADR);
+
+	outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR);
+
+#ifndef CONFIG_HD64461_ENABLER
+	outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR);
+#endif
+
+	sh_dac_output(0, DAC_SPEAKER_VOLUME);
+	sh_dac_disable(DAC_SPEAKER_VOLUME);
+	v8 = __raw_readb(DACR);
+	v8 &= ~DACR_DAE;
+	__raw_writeb(v8,DACR);
+
+	v8 = __raw_readb(SCPDR);
+	v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
+	v8 &= ~SCPDR_TS_SCAN_ENABLE;
+	__raw_writeb(v8, SCPDR);
+
+	v = __raw_readw(SCPCR);
+	v &= ~SCPCR_TS_MASK;
+	v |= SCPCR_TS_ENABLE;
+	__raw_writew(v, SCPCR);
+}
+device_initcall(hp6xx_devices_setup);
+
+static struct sh_machine_vector mv_hp6xx __initmv = {
+	.mv_name = "hp6xx",
+	.mv_setup = hp6xx_setup,
+	/* Enable IRQ0 -> IRQ3 in IRQ_MODE */
+	.mv_init_irq = hp6xx_init_irq,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-kfr2r09/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-kfr2r09/Makefile
new file mode 100644
index 0000000..60dd63f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-kfr2r09/Makefile
@@ -0,0 +1,4 @@
+obj-y	:= setup.o sdram.o
+ifneq ($(CONFIG_FB_SH_MOBILE_LCDC),)
+obj-y	+=  lcd_wqvga.o
+endif
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
new file mode 100644
index 0000000..355a78a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
@@ -0,0 +1,278 @@
+/*
+ * KFR2R09 LCD panel support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * Register settings based on the out-of-tree t33fb.c driver
+ * Copyright (C) 2008 Lineo Solutions, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <video/sh_mobile_lcdc.h>
+#include <mach/kfr2r09.h>
+#include <cpu/sh7724.h>
+
+/* The on-board LCD module is a Hitachi TX07D34VM0AAA. This module is made
+ * up of a 240x400 LCD hooked up to a R61517 driver IC. The driver IC is
+ * communicating with the main port of the LCDC using an 18-bit SYS interface.
+ *
+ * The device code for this LCD module is 0x01221517.
+ */
+
+static const unsigned char data_frame_if[] = {
+	0x02, /* WEMODE: 1=cont, 0=one-shot */
+	0x00, 0x00,
+	0x00, /* EPF, DFM */
+	0x02, /* RIM[1] : 1 (18bpp) */
+};
+
+static const unsigned char data_panel[] = {
+	0x0b,
+	0x63, /* 400 lines */
+	0x04, 0x00, 0x00, 0x04, 0x11, 0x00, 0x00,
+};
+
+static const unsigned char data_timing[] = {
+	0x00, 0x00, 0x13, 0x08, 0x08,
+};
+
+static const unsigned char data_timing_src[] = {
+	0x11, 0x01, 0x00, 0x01,
+};
+
+static const unsigned char data_gamma[] = {
+	0x01, 0x02, 0x08, 0x23,	0x03, 0x0c, 0x00, 0x06,	0x00, 0x00,
+	0x01, 0x00, 0x0c, 0x23, 0x03, 0x08, 0x02, 0x06, 0x00, 0x00,
+};
+
+static const unsigned char data_power[] = {
+	0x07, 0xc5, 0xdc, 0x02,	0x33, 0x0a,
+};
+
+static unsigned long read_reg(void *sohandle,
+			      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	return so->read_data(sohandle);
+}
+
+static void write_reg(void *sohandle,
+		      struct sh_mobile_lcdc_sys_bus_ops *so,
+		      int i, unsigned long v)
+{
+	if (i)
+		so->write_data(sohandle, v); /* PTH4/LCDRS High [param, 17:0] */
+	else
+		so->write_index(sohandle, v); /* PTH4/LCDRS Low [cmd, 7:0] */
+}
+
+static void write_data(void *sohandle,
+		       struct sh_mobile_lcdc_sys_bus_ops *so,
+		       unsigned char const *data, int no_data)
+{
+	int i;
+
+	for (i = 0; i < no_data; i++)
+		write_reg(sohandle, so, 1, data[i]);
+}
+
+static unsigned long read_device_code(void *sohandle,
+				      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	unsigned long device_code;
+
+	/* access protect OFF */
+	write_reg(sohandle, so, 0, 0xb0);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* deep standby OFF */
+	write_reg(sohandle, so, 0, 0xb1);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* device code command */
+	write_reg(sohandle, so, 0, 0xbf);
+	mdelay(50);
+
+	/* dummy read */
+	read_reg(sohandle, so);
+
+	/* read device code */
+	device_code = ((read_reg(sohandle, so) & 0xff) << 24);
+	device_code |= ((read_reg(sohandle, so) & 0xff) << 16);
+	device_code |= ((read_reg(sohandle, so) & 0xff) << 8);
+	device_code |= (read_reg(sohandle, so) & 0xff);
+
+	return device_code;
+}
+
+static void write_memory_start(void *sohandle,
+			       struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	write_reg(sohandle, so, 0, 0x2c);
+}
+
+static void clear_memory(void *sohandle,
+			 struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	int i;
+
+	/* write start */
+	write_memory_start(sohandle, so);
+
+	/* paint it black */
+	for (i = 0; i < (240 * 400); i++)
+		write_reg(sohandle, so, 1, 0x00);
+}
+
+static void display_on(void *sohandle,
+		       struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	/* access protect off */
+	write_reg(sohandle, so, 0, 0xb0);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* exit deep standby mode */
+	write_reg(sohandle, so, 0, 0xb1);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* frame memory I/F */
+	write_reg(sohandle, so, 0, 0xb3);
+	write_data(sohandle, so, data_frame_if, ARRAY_SIZE(data_frame_if));
+
+	/* display mode and frame memory write mode */
+	write_reg(sohandle, so, 0, 0xb4);
+	write_reg(sohandle, so, 1, 0x00); /* DBI, internal clock */
+
+	/* panel */
+	write_reg(sohandle, so, 0, 0xc0);
+	write_data(sohandle, so, data_panel, ARRAY_SIZE(data_panel));
+
+	/* timing (normal) */
+	write_reg(sohandle, so, 0, 0xc1);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (partial) */
+	write_reg(sohandle, so, 0, 0xc2);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (idle) */
+	write_reg(sohandle, so, 0, 0xc3);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (source/VCOM/gate driving) */
+	write_reg(sohandle, so, 0, 0xc4);
+	write_data(sohandle, so, data_timing_src, ARRAY_SIZE(data_timing_src));
+
+	/* gamma (red) */
+	write_reg(sohandle, so, 0, 0xc8);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* gamma (green) */
+	write_reg(sohandle, so, 0, 0xc9);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* gamma (blue) */
+	write_reg(sohandle, so, 0, 0xca);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* power (common) */
+	write_reg(sohandle, so, 0, 0xd0);
+	write_data(sohandle, so, data_power, ARRAY_SIZE(data_power));
+
+	/* VCOM */
+	write_reg(sohandle, so, 0, 0xd1);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x0f);
+	write_reg(sohandle, so, 1, 0x02);
+
+	/* power (normal) */
+	write_reg(sohandle, so, 0, 0xd2);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	/* power (partial) */
+	write_reg(sohandle, so, 0, 0xd3);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	/* power (idle) */
+	write_reg(sohandle, so, 0, 0xd4);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	write_reg(sohandle, so, 0, 0xd8);
+	write_reg(sohandle, so, 1, 0x77);
+	write_reg(sohandle, so, 1, 0x77);
+
+	/* TE signal */
+	write_reg(sohandle, so, 0, 0x35);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* TE signal line */
+	write_reg(sohandle, so, 0, 0x44);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* column address */
+	write_reg(sohandle, so, 0, 0x2a);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0xef);
+
+	/* page address */
+	write_reg(sohandle, so, 0, 0x2b);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x01);
+	write_reg(sohandle, so, 1, 0x8f);
+
+	/* exit sleep mode */
+	write_reg(sohandle, so, 0, 0x11);
+
+	mdelay(120);
+
+	/* clear vram */
+	clear_memory(sohandle, so);
+
+	/* display ON */
+	write_reg(sohandle, so, 0, 0x29);
+	mdelay(1);
+
+	write_memory_start(sohandle, so);
+}
+
+int kfr2r09_lcd_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	/* power on */
+	gpio_set_value(GPIO_PTF4, 0);  /* PROTECT/ -> L */
+	gpio_set_value(GPIO_PTE4, 0);  /* LCD_RST/ -> L */
+	gpio_set_value(GPIO_PTF4, 1);  /* PROTECT/ -> H */
+	udelay(1100);
+	gpio_set_value(GPIO_PTE4, 1);  /* LCD_RST/ -> H */
+	udelay(10);
+	gpio_set_value(GPIO_PTF4, 0);  /* PROTECT/ -> L */
+	mdelay(20);
+
+	if (read_device_code(sohandle, so) != 0x01221517)
+		return -ENODEV;
+
+	pr_info("KFR2R09 WQVGA LCD Module detected.\n");
+
+	display_on(sohandle, so);
+	return 0;
+}
+
+void kfr2r09_lcd_start(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	write_memory_start(sohandle, so);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-kfr2r09/sdram.S b/src/kernel/linux/v4.14/arch/sh/boards/mach-kfr2r09/sdram.S
new file mode 100644
index 0000000..0c9f55b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-kfr2r09/sdram.S
@@ -0,0 +1,80 @@
+/*
+ * KFR2R09 sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(kfr2r09_sdram_enter_start)
+
+	/* DBSC: put memory in self-refresh mode */
+
+	ED 0xFD000010, 0x00000000 /* DBEN */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(kfr2r09_sdram_enter_end)
+
+	.balign 4
+ENTRY(kfr2r09_sdram_leave_start)
+
+	/* DBSC: put memory in auto-refresh mode */
+
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_RSTANDBY, r0
+	bf	resume_rstandby
+
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	WAIT 1
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+resume_rstandby:
+
+	/* DBSC: re-initialize and put in auto-refresh */
+
+	ED 0xFD000108, 0x40000301 /* DBPDCNT0 */
+	ED 0xFD000020, 0x011B0002 /* DBCONF */
+	ED 0xFD000030, 0x03060E02 /* DBTR0 */
+	ED 0xFD000034, 0x01020102 /* DBTR1 */
+	ED 0xFD000038, 0x01090406 /* DBTR2 */
+	ED 0xFD000008, 0x00000004 /* DBKIND */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000018, 0x00000001 /* DBCKECNT */
+	WAIT 1
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000044, 0x000004AF /* DBRFPDN1 */
+	ED 0xFD000048, 0x20CF0037 /* DBRFPDN2 */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000108, 0x40000300 /* DBPDCNT0 */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(kfr2r09_sdram_leave_end)
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-kfr2r09/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-kfr2r09/setup.c
new file mode 100644
index 0000000..5deb2d8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-kfr2r09/setup.c
@@ -0,0 +1,660 @@
+/*
+ * KFR2R09 board support code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mmc/host.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/onenand.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/lv5207lp.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/videodev2.h>
+#include <linux/sh_intc.h>
+#include <media/i2c/rj54n1cb0c.h>
+#include <media/soc_camera.h>
+#include <media/drv-intf/sh_mobile_ceu.h>
+#include <video/sh_mobile_lcdc.h>
+#include <asm/suspend.h>
+#include <asm/clock.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <cpu/sh7724.h>
+#include <mach/kfr2r09.h>
+
+static struct mtd_partition kfr2r09_nor_flash_partitions[] =
+{
+	{
+		.name = "boot",
+		.offset = 0,
+		.size = (4 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name = "other",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data kfr2r09_nor_flash_data = {
+	.width		= 2,
+	.parts		= kfr2r09_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(kfr2r09_nor_flash_partitions),
+};
+
+static struct resource kfr2r09_nor_flash_resources[] = {
+	[0] = {
+		.name		= "NOR Flash",
+		.start		= 0x00000000,
+		.end		= 0x03ffffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device kfr2r09_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= kfr2r09_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(kfr2r09_nor_flash_resources),
+	.dev		= {
+		.platform_data = &kfr2r09_nor_flash_data,
+	},
+};
+
+static struct resource kfr2r09_nand_flash_resources[] = {
+	[0] = {
+		.name		= "NAND Flash",
+		.start		= 0x10000000,
+		.end		= 0x1001ffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device kfr2r09_nand_flash_device = {
+	.name		= "onenand-flash",
+	.resource	= kfr2r09_nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(kfr2r09_nand_flash_resources),
+};
+
+static struct sh_keysc_info kfr2r09_sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
+	.scan_timing = 3,
+	.delay = 10,
+	.keycodes = {
+		KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
+		KEY_1, KEY_2, KEY_3, 0, KEY_UP,
+		KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
+		KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
+		KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
+		0, 0, 0, 0, 0
+	},
+};
+
+static struct resource kfr2r09_sh_keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xbe0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kfr2r09_sh_keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
+	.resource       = kfr2r09_sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &kfr2r09_sh_keysc_info,
+	},
+};
+
+static const struct fb_videomode kfr2r09_lcdc_modes[] = {
+	{
+		.name = "TX07D34VM0AAA",
+		.xres = 240,
+		.yres = 400,
+		.left_margin = 0,
+		.right_margin = 16,
+		.hsync_len = 8,
+		.upper_margin = 0,
+		.lower_margin = 1,
+		.vsync_len = 1,
+		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	},
+};
+
+static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.interface_type = SYS18,
+		.clock_divider = 6,
+		.flags = LCDC_FLAGS_DWPOL,
+		.lcd_modes = kfr2r09_lcdc_modes,
+		.num_modes = ARRAY_SIZE(kfr2r09_lcdc_modes),
+		.panel_cfg = {
+			.width = 35,
+			.height = 58,
+			.setup_sys = kfr2r09_lcd_setup,
+			.start_transfer = kfr2r09_lcd_start,
+		},
+		.sys_bus_cfg = {
+			.ldmt2r = 0x07010904,
+			.ldmt3r = 0x14012914,
+			/* set 1s delay to encourage fsync() */
+			.deferred_io_msec = 1000,
+		},
+	}
+};
+
+static struct resource kfr2r09_sh_lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xf40),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kfr2r09_sh_lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
+	.resource	= kfr2r09_sh_lcdc_resources,
+	.dev	= {
+		.platform_data	= &kfr2r09_sh_lcdc_info,
+	},
+};
+
+static struct lv5207lp_platform_data kfr2r09_backlight_data = {
+	.fbdev = &kfr2r09_sh_lcdc_device.dev,
+	.def_value = 13,
+	.max_value = 13,
+};
+
+static struct i2c_board_info kfr2r09_backlight_board_info = {
+	I2C_BOARD_INFO("lv5207lp", 0x75),
+	.platform_data = &kfr2r09_backlight_data,
+};
+
+static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
+	.on_chip = 1,
+};
+
+static struct resource kfr2r09_usb0_gadget_resources[] = {
+	[0] = {
+		.start	= 0x04d80000,
+		.end	= 0x04d80123,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa20),
+		.end	= evt2irq(0xa20),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device kfr2r09_usb0_gadget_device = {
+	.name		= "r8a66597_udc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data	= &kfr2r09_usb0_gadget_data,
+	},
+	.num_resources	= ARRAY_SIZE(kfr2r09_usb0_gadget_resources),
+	.resource	= kfr2r09_usb0_gadget_resources,
+};
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource kfr2r09_ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x880),
+		.end	= evt2irq(0x880),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device kfr2r09_ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(kfr2r09_ceu_resources),
+	.resource	= kfr2r09_ceu_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
+static struct i2c_board_info kfr2r09_i2c_camera = {
+	I2C_BOARD_INFO("rj54n1cb0c", 0x50),
+};
+
+static struct clk *camera_clk;
+
+/* set VIO_CKO clock to 25MHz */
+#define CEU_MCLK_FREQ 25000000
+
+#define DRVCRB 0xA405018C
+static int camera_power(struct device *dev, int mode)
+{
+	int ret;
+
+	if (mode) {
+		long rate;
+
+		camera_clk = clk_get(NULL, "video_clk");
+		if (IS_ERR(camera_clk))
+			return PTR_ERR(camera_clk);
+
+		rate = clk_round_rate(camera_clk, CEU_MCLK_FREQ);
+		ret = clk_set_rate(camera_clk, rate);
+		if (ret < 0)
+			goto eclkrate;
+
+		/* set DRVCRB
+		 *
+		 * use 1.8 V for VccQ_VIO
+		 * use 2.85V for VccQ_SR
+		 */
+		__raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
+
+		/* reset clear */
+		ret = gpio_request(GPIO_PTB4, NULL);
+		if (ret < 0)
+			goto eptb4;
+		ret = gpio_request(GPIO_PTB7, NULL);
+		if (ret < 0)
+			goto eptb7;
+
+		ret = gpio_direction_output(GPIO_PTB4, 1);
+		if (!ret)
+			ret = gpio_direction_output(GPIO_PTB7, 1);
+		if (ret < 0)
+			goto egpioout;
+		msleep(1);
+
+		ret = clk_enable(camera_clk);	/* start VIO_CKO */
+		if (ret < 0)
+			goto eclkon;
+
+		return 0;
+	}
+
+	ret = 0;
+
+	clk_disable(camera_clk);
+eclkon:
+	gpio_set_value(GPIO_PTB7, 0);
+egpioout:
+	gpio_set_value(GPIO_PTB4, 0);
+	gpio_free(GPIO_PTB7);
+eptb7:
+	gpio_free(GPIO_PTB4);
+eptb4:
+eclkrate:
+	clk_put(camera_clk);
+	return ret;
+}
+
+static struct rj54n1_pdata rj54n1_priv = {
+	.mclk_freq	= CEU_MCLK_FREQ,
+	.ioctl_high	= false,
+};
+
+static struct soc_camera_link rj54n1_link = {
+	.power		= camera_power,
+	.board_info	= &kfr2r09_i2c_camera,
+	.i2c_adapter_id	= 1,
+	.priv		= &rj54n1_priv,
+};
+
+static struct platform_device kfr2r09_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &rj54n1_link,
+	},
+};
+
+/* Fixed 3.3V regulator to be used by SDHI0 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct resource kfr2r09_sh_sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0x04ce0000,
+		.end    = 0x04ce00ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xe80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct tmio_mmc_data sh7724_sdhi0_data = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
+	.flags		= TMIO_MMC_WRPROTECT_DISABLE,
+	.capabilities	= MMC_CAP_SDIO_IRQ,
+};
+
+static struct platform_device kfr2r09_sh_sdhi0_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
+	.resource       = kfr2r09_sh_sdhi0_resources,
+	.dev = {
+		.platform_data	= &sh7724_sdhi0_data,
+	},
+};
+
+static struct platform_device *kfr2r09_devices[] __initdata = {
+	&kfr2r09_nor_flash_device,
+	&kfr2r09_nand_flash_device,
+	&kfr2r09_sh_keysc_device,
+	&kfr2r09_sh_lcdc_device,
+	&kfr2r09_ceu_device,
+	&kfr2r09_camera,
+	&kfr2r09_sh_sdhi0_device,
+};
+
+#define BSC_CS0BCR 0xfec10004
+#define BSC_CS0WCR 0xfec10024
+#define BSC_CS4BCR 0xfec10010
+#define BSC_CS4WCR 0xfec10030
+#define PORT_MSELCRB 0xa4050182
+
+#ifdef CONFIG_I2C
+static int kfr2r09_usb0_gadget_i2c_setup(void)
+{
+	struct i2c_adapter *a;
+	struct i2c_msg msg;
+	unsigned char buf[2];
+	int ret;
+
+	a = i2c_get_adapter(0);
+	if (!a)
+		return -ENODEV;
+
+	/* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
+	buf[0] = 0x13;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 1;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[0] = 0;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 1;
+	msg.flags = I2C_M_RD;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[1] = buf[0] | (1 << 1);
+	buf[0] = 0x13;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int kfr2r09_serial_i2c_setup(void)
+{
+	struct i2c_adapter *a;
+	struct i2c_msg msg;
+	unsigned char buf[2];
+	int ret;
+
+	a = i2c_get_adapter(0);
+	if (!a)
+		return -ENODEV;
+
+	/* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */
+	buf[0] = 0x13;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 1;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[0] = 0;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 1;
+	msg.flags = I2C_M_RD;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[1] = buf[0] | (1 << 6);
+	buf[0] = 0x13;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	return 0;
+}
+#else
+static int kfr2r09_usb0_gadget_i2c_setup(void)
+{
+	return -ENODEV;
+}
+
+static int kfr2r09_serial_i2c_setup(void)
+{
+	return -ENODEV;
+}
+#endif
+
+static int kfr2r09_usb0_gadget_setup(void)
+{
+	int plugged_in;
+
+	gpio_request(GPIO_PTN4, NULL); /* USB_DET */
+	gpio_direction_input(GPIO_PTN4);
+	plugged_in = gpio_get_value(GPIO_PTN4);
+	if (!plugged_in)
+		return -ENODEV; /* no cable plugged in */
+
+	if (kfr2r09_usb0_gadget_i2c_setup() != 0)
+		return -ENODEV; /* unable to configure using i2c */
+
+	__raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+	gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
+	gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
+	gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
+	msleep(20); /* wait 20ms to let the clock settle */
+	clk_enable(clk_get(NULL, "usb0"));
+	__raw_writew(0x0600, 0xa40501d4);
+
+	return 0;
+}
+
+extern char kfr2r09_sdram_enter_start;
+extern char kfr2r09_sdram_enter_end;
+extern char kfr2r09_sdram_leave_start;
+extern char kfr2r09_sdram_leave_end;
+
+static int __init kfr2r09_devices_setup(void)
+{
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+					SUSP_SH_RSTANDBY,
+					&kfr2r09_sdram_enter_start,
+					&kfr2r09_sdram_enter_end,
+					&kfr2r09_sdram_leave_start,
+					&kfr2r09_sdram_leave_end);
+
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
+	/* enable SCIF1 serial port for YC401 console support */
+	gpio_request(GPIO_FN_SCIF1_RXD, NULL);
+	gpio_request(GPIO_FN_SCIF1_TXD, NULL);
+	kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */
+	gpio_request(GPIO_PTG3, NULL); /* HPON_ON */
+	gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
+
+	/* setup NOR flash at CS0 */
+	__raw_writel(0x36db0400, BSC_CS0BCR);
+	__raw_writel(0x00000500, BSC_CS0WCR);
+
+	/* setup NAND flash at CS4 */
+	__raw_writel(0x36db0400, BSC_CS4BCR);
+	__raw_writel(0x00000500, BSC_CS4WCR);
+
+	/* setup KEYSC pins */
+	gpio_request(GPIO_FN_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYIN0, NULL);
+	gpio_request(GPIO_FN_KEYIN1, NULL);
+	gpio_request(GPIO_FN_KEYIN2, NULL);
+	gpio_request(GPIO_FN_KEYIN3, NULL);
+	gpio_request(GPIO_FN_KEYIN4, NULL);
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+
+	/* setup LCDC pins for SYS panel */
+	gpio_request(GPIO_FN_LCDD17, NULL);
+	gpio_request(GPIO_FN_LCDD16, NULL);
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD9, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDD0, NULL);
+	gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
+	gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
+	gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
+	gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
+	gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
+	gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
+	gpio_direction_output(GPIO_PTE4, 1);
+	gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
+	gpio_direction_output(GPIO_PTF4, 1);
+	gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
+	gpio_direction_output(GPIO_PTU0, 1);
+
+	/* setup USB function */
+	if (kfr2r09_usb0_gadget_setup() == 0)
+		platform_device_register(&kfr2r09_usb0_gadget_device);
+
+	/* CEU */
+	gpio_request(GPIO_FN_VIO_CKO, NULL);
+	gpio_request(GPIO_FN_VIO0_CLK, NULL);
+	gpio_request(GPIO_FN_VIO0_VD, NULL);
+	gpio_request(GPIO_FN_VIO0_HD, NULL);
+	gpio_request(GPIO_FN_VIO0_FLD, NULL);
+	gpio_request(GPIO_FN_VIO0_D7, NULL);
+	gpio_request(GPIO_FN_VIO0_D6, NULL);
+	gpio_request(GPIO_FN_VIO0_D5, NULL);
+	gpio_request(GPIO_FN_VIO0_D4, NULL);
+	gpio_request(GPIO_FN_VIO0_D3, NULL);
+	gpio_request(GPIO_FN_VIO0_D2, NULL);
+	gpio_request(GPIO_FN_VIO0_D1, NULL);
+	gpio_request(GPIO_FN_VIO0_D0, NULL);
+
+	platform_resource_setup_memory(&kfr2r09_ceu_device, "ceu", 4 << 20);
+
+	/* SDHI0 connected to yc304 */
+	gpio_request(GPIO_FN_SDHI0CD, NULL);
+	gpio_request(GPIO_FN_SDHI0D3, NULL);
+	gpio_request(GPIO_FN_SDHI0D2, NULL);
+	gpio_request(GPIO_FN_SDHI0D1, NULL);
+	gpio_request(GPIO_FN_SDHI0D0, NULL);
+	gpio_request(GPIO_FN_SDHI0CMD, NULL);
+	gpio_request(GPIO_FN_SDHI0CLK, NULL);
+
+	i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1);
+
+	return platform_add_devices(kfr2r09_devices,
+				    ARRAY_SIZE(kfr2r09_devices));
+}
+device_initcall(kfr2r09_devices_setup);
+
+/* Return the board specific boot mode pin configuration */
+static int kfr2r09_mode_pins(void)
+{
+	/* MD0=1, MD1=1, MD2=0: Clock Mode 3
+	 * MD3=0: 16-bit Area0 Bus Width
+	 * MD5=1: Little Endian
+	 * MD8=1: Test Mode Disabled
+	 */
+	return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_kfr2r09 __initmv = {
+	.mv_name		= "kfr2r09",
+	.mv_mode_pins		= kfr2r09_mode_pins,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-landisk/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-landisk/Makefile
new file mode 100644
index 0000000..a696b42
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-landisk/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for I-O DATA DEVICE, INC. "LANDISK Series"
+#
+
+obj-y	 := setup.o irq.o psw.o gio.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-landisk/gio.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-landisk/gio.c
new file mode 100644
index 0000000..32c317f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-landisk/gio.c
@@ -0,0 +1,170 @@
+/*
+ * arch/sh/boards/landisk/gio.c - driver for landisk
+ *
+ * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
+ * LANDISK and USL-5P Button, LED and GIO driver drive function.
+ *
+ *   Copylight (C) 2006 kogiidena
+ *   Copylight (C) 2002 Atom Create Engineering Co., Ltd. *
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kdev_t.h>
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <mach-landisk/mach/gio.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+
+#define DEVCOUNT                4
+#define GIO_MINOR	        2	/* GIO minor no. */
+
+static dev_t dev;
+static struct cdev *cdev_p;
+static int openCnt;
+
+static int gio_open(struct inode *inode, struct file *filp)
+{
+	int minor;
+	int ret = -ENOENT;
+
+	preempt_disable();
+	minor = MINOR(inode->i_rdev);
+	if (minor < DEVCOUNT) {
+		if (openCnt > 0) {
+			ret = -EALREADY;
+		} else {
+			openCnt++;
+			ret = 0;
+		}
+	}
+	preempt_enable();
+	return ret;
+}
+
+static int gio_close(struct inode *inode, struct file *filp)
+{
+	int minor;
+
+	minor = MINOR(inode->i_rdev);
+	if (minor < DEVCOUNT) {
+		openCnt--;
+	}
+	return 0;
+}
+
+static long gio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	unsigned int data;
+	static unsigned int addr = 0;
+
+	if (cmd & 0x01) {	/* write */
+		if (copy_from_user(&data, (int *)arg, sizeof(int))) {
+			return -EFAULT;
+		}
+	}
+
+	switch (cmd) {
+	case GIODRV_IOCSGIOSETADDR:	/* address set */
+		addr = data;
+		break;
+
+	case GIODRV_IOCSGIODATA1:	/* write byte */
+		__raw_writeb((unsigned char)(0x0ff & data), addr);
+		break;
+
+	case GIODRV_IOCSGIODATA2:	/* write word */
+		if (addr & 0x01) {
+			return -EFAULT;
+		}
+		__raw_writew((unsigned short int)(0x0ffff & data), addr);
+		break;
+
+	case GIODRV_IOCSGIODATA4:	/* write long */
+		if (addr & 0x03) {
+			return -EFAULT;
+		}
+		__raw_writel(data, addr);
+		break;
+
+	case GIODRV_IOCGGIODATA1:	/* read byte */
+		data = __raw_readb(addr);
+		break;
+
+	case GIODRV_IOCGGIODATA2:	/* read word */
+		if (addr & 0x01) {
+			return -EFAULT;
+		}
+		data = __raw_readw(addr);
+		break;
+
+	case GIODRV_IOCGGIODATA4:	/* read long */
+		if (addr & 0x03) {
+			return -EFAULT;
+		}
+		data = __raw_readl(addr);
+		break;
+	default:
+		return -EFAULT;
+		break;
+	}
+
+	if ((cmd & 0x01) == 0) {	/* read */
+		if (copy_to_user((int *)arg, &data, sizeof(int))) {
+			return -EFAULT;
+		}
+	}
+	return 0;
+}
+
+static const struct file_operations gio_fops = {
+	.owner = THIS_MODULE,
+	.open = gio_open,	/* open */
+	.release = gio_close,	/* release */
+	.unlocked_ioctl = gio_ioctl,
+	.llseek = noop_llseek,
+};
+
+static int __init gio_init(void)
+{
+	int error;
+
+	printk(KERN_INFO "gio: driver initialized\n");
+
+	openCnt = 0;
+
+	if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) {
+		printk(KERN_ERR
+		       "gio: Couldn't alloc_chrdev_region, error=%d\n",
+		       error);
+		return 1;
+	}
+
+	cdev_p = cdev_alloc();
+	cdev_p->ops = &gio_fops;
+	error = cdev_add(cdev_p, dev, DEVCOUNT);
+	if (error) {
+		printk(KERN_ERR
+		       "gio: Couldn't cdev_add, error=%d\n", error);
+		return 1;
+	}
+
+	return 0;
+}
+
+static void __exit gio_exit(void)
+{
+	cdev_del(cdev_p);
+	unregister_chrdev_region(dev, DEVCOUNT);
+}
+
+module_init(gio_init);
+module_exit(gio_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-landisk/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-landisk/irq.c
new file mode 100644
index 0000000..c00ace3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-landisk/irq.c
@@ -0,0 +1,66 @@
+/*
+ * arch/sh/boards/mach-landisk/irq.c
+ *
+ * I-O DATA Device, Inc. LANDISK Support
+ *
+ * Copyright (C) 2005-2007 kogiidena
+ * Copyright (C) 2011 Nobuhiro Iwamatsu
+ *
+ * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+
+enum {
+	UNUSED = 0,
+
+	PCI_INTA, /* PCI int A */
+	PCI_INTB, /* PCI int B */
+	PCI_INTC, /* PCI int C */
+	PCI_INTD, /* PCI int D */
+	ATA,	  /* ATA */
+	FATA,	  /* CF */
+	POWER,	  /* Power swtich */
+	BUTTON,	  /* Button swtich */
+};
+
+/* Vectors for LANDISK */
+static struct intc_vect vectors_landisk[] __initdata = {
+	INTC_IRQ(PCI_INTA, IRQ_PCIINTA),
+	INTC_IRQ(PCI_INTB, IRQ_PCIINTB),
+	INTC_IRQ(PCI_INTC, IRQ_PCIINTC),
+	INTC_IRQ(PCI_INTD, IRQ_PCIINTD),
+	INTC_IRQ(ATA, IRQ_ATA),
+	INTC_IRQ(FATA, IRQ_FATA),
+	INTC_IRQ(POWER, IRQ_POWER),
+	INTC_IRQ(BUTTON, IRQ_BUTTON),
+};
+
+/* IRLMSK mask register layout for LANDISK */
+static struct intc_mask_reg mask_registers_landisk[] __initdata = {
+	{ PA_IMASK, 0, 8, /* IRLMSK */
+	  {  BUTTON, POWER, FATA, ATA,
+	     PCI_INTD, PCI_INTC, PCI_INTB, PCI_INTA,
+	  }
+	},
+};
+
+static DECLARE_INTC_DESC(intc_desc_landisk, "landisk", vectors_landisk, NULL,
+			mask_registers_landisk, NULL, NULL);
+/*
+ * Initialize IRQ setting
+ */
+void __init init_landisk_IRQ(void)
+{
+	register_intc_controller(&intc_desc_landisk);
+	__raw_writeb(0x00, PA_PWRINT_CLR);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-landisk/psw.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-landisk/psw.c
new file mode 100644
index 0000000..5192b1f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-landisk/psw.c
@@ -0,0 +1,143 @@
+/*
+ * arch/sh/boards/landisk/psw.c
+ *
+ * push switch support for LANDISK and USL-5P
+ *
+ * Copyright (C) 2006-2007  Paul Mundt
+ * Copyright (C) 2007  kogiidena
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+#include <asm/push-switch.h>
+
+static irqreturn_t psw_irq_handler(int irq, void *arg)
+{
+	struct platform_device *pdev = arg;
+	struct push_switch *psw = platform_get_drvdata(pdev);
+	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+	unsigned int sw_value;
+	int ret = 0;
+
+	sw_value = (0x0ff & (~__raw_readb(PA_STATUS)));
+
+	/* Nothing to do if there's no state change */
+	if (psw->state) {
+		ret = 1;
+		goto out;
+	}
+
+	/* Figure out who raised it */
+	if (sw_value & (1 << psw_info->bit)) {
+		psw->state = 1;
+		mod_timer(&psw->debounce, jiffies + 50);
+		ret = 1;
+	}
+
+out:
+	/* Clear the switch IRQs */
+	__raw_writeb(0x00, PA_PWRINT_CLR);
+
+	return IRQ_RETVAL(ret);
+}
+
+static struct resource psw_power_resources[] = {
+	[0] = {
+		.start = IRQ_POWER,
+		.flags = IORESOURCE_IRQ,
+       },
+};
+
+static struct resource psw_usl5p_resources[] = {
+	[0] = {
+		.start = IRQ_BUTTON,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct push_switch_platform_info psw_power_platform_data = {
+	.name		= "psw_power",
+	.bit		= 4,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw1_platform_data = {
+	.name		= "psw1",
+	.bit		= 0,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw2_platform_data = {
+	.name		= "psw2",
+	.bit		= 2,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw3_platform_data = {
+	.name		= "psw3",
+	.bit		= 1,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device psw_power_switch_device = {
+	.name		= "push-switch",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(psw_power_resources),
+	.resource	= psw_power_resources,
+	.dev		= {
+		.platform_data = &psw_power_platform_data,
+	},
+};
+
+static struct platform_device psw1_switch_device = {
+	.name		= "push-switch",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev		= {
+		.platform_data = &psw1_platform_data,
+	},
+};
+
+static struct platform_device psw2_switch_device = {
+	.name		= "push-switch",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev		= {
+		.platform_data = &psw2_platform_data,
+	},
+};
+
+static struct platform_device psw3_switch_device = {
+	.name		= "push-switch",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev = {
+		.platform_data = &psw3_platform_data,
+	},
+};
+
+static struct platform_device *psw_devices[] = {
+	&psw_power_switch_device,
+	&psw1_switch_device,
+	&psw2_switch_device,
+	&psw3_switch_device,
+};
+
+static int __init psw_init(void)
+{
+	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
+}
+device_initcall(psw_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-landisk/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-landisk/setup.c
new file mode 100644
index 0000000..af69fb7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-landisk/setup.c
@@ -0,0 +1,105 @@
+/*
+ * arch/sh/boards/landisk/setup.c
+ *
+ * I-O DATA Device, Inc. LANDISK Support.
+ *
+ * Copyright (C) 2000 Kazumoto Kojima
+ * Copyright (C) 2002 Paul Mundt
+ * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2005-2007 kogiidena
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/pm.h>
+#include <linux/mm.h>
+#include <asm/machvec.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+#include <asm/io.h>
+
+static void landisk_power_off(void)
+{
+	__raw_writeb(0x01, PA_SHUTDOWN);
+}
+
+static struct resource cf_ide_resources[3];
+
+static struct pata_platform_info pata_info = {
+	.ioport_shift	= 1,
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+	.dev		= {
+		.platform_data = &pata_info,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "rs5c313",
+	.id		= -1,
+};
+
+static struct platform_device *landisk_devices[] __initdata = {
+	&cf_ide_device,
+	&rtc_device,
+};
+
+static int __init landisk_devices_setup(void)
+{
+	pgprot_t prot;
+	unsigned long paddrbase;
+	void *cf_ide_base;
+
+	/* open I/O area window */
+	paddrbase = virt_to_phys((void *)PA_AREA5_IO);
+	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+	cf_ide_base = ioremap_prot(paddrbase, PAGE_SIZE, pgprot_val(prot));
+	if (!cf_ide_base) {
+		printk("allocate_cf_area : can't open CF I/O window!\n");
+		return -ENOMEM;
+	}
+
+	/* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
+	cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40;
+	cf_ide_resources[0].end   = (unsigned long)cf_ide_base + 0x40 + 0x0f;
+	cf_ide_resources[0].flags = IORESOURCE_IO;
+	cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c;
+	cf_ide_resources[1].end   = (unsigned long)cf_ide_base + 0x2c + 0x03;
+	cf_ide_resources[1].flags = IORESOURCE_IO;
+	cf_ide_resources[2].start = IRQ_FATA;
+	cf_ide_resources[2].flags = IORESOURCE_IRQ;
+
+	return platform_add_devices(landisk_devices,
+				    ARRAY_SIZE(landisk_devices));
+}
+
+device_initcall(landisk_devices_setup);
+
+static void __init landisk_setup(char **cmdline_p)
+{
+	/* I/O port identity mapping */
+	__set_io_port_base(0);
+
+	/* LED ON */
+	__raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED);
+
+	printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
+	pm_power_off = landisk_power_off;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_landisk __initmv = {
+	.mv_name = "LANDISK",
+	.mv_setup = landisk_setup,
+	.mv_init_irq = init_landisk_IRQ,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-lboxre2/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-lboxre2/Makefile
new file mode 100644
index 0000000..e9ed140
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-lboxre2/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the L-BOX RE2 specific parts of the kernel
+# Copyright (c) 2007 Nobuhiro Iwamatsu
+
+obj-y	 := setup.o irq.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-lboxre2/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-lboxre2/irq.c
new file mode 100644
index 0000000..8aa171a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-lboxre2/irq.c
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/sh/boards/lboxre2/irq.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * NTT COMWARE L-BOX RE2 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach/lboxre2.h>
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_lboxre2_IRQ(void)
+{
+	make_imask_irq(IRQ_CF1);
+	make_imask_irq(IRQ_CF0);
+	make_imask_irq(IRQ_INTD);
+	make_imask_irq(IRQ_ETH1);
+	make_imask_irq(IRQ_ETH0);
+	make_imask_irq(IRQ_INTA);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-lboxre2/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-lboxre2/setup.c
new file mode 100644
index 0000000..6660622
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-lboxre2/setup.c
@@ -0,0 +1,83 @@
+/*
+ * linux/arch/sh/boards/lbox/setup.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * NTT COMWARE L-BOX RE2 Support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <asm/machvec.h>
+#include <asm/addrspace.h>
+#include <mach/lboxre2.h>
+#include <asm/io.h>
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = 0x1f0,
+		.end    = 0x1f0 + 8 ,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] = {
+		.start  = 0x1f0 + 0x206,
+		.end    = 0x1f0 +8 + 0x206 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = IRQ_CF0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static struct platform_device *lboxre2_devices[] __initdata = {
+       &cf_ide_device,
+};
+
+static int __init lboxre2_devices_setup(void)
+{
+	u32 cf0_io_base;	/* Boot CF base address */
+	pgprot_t prot;
+	unsigned long paddrbase, psize;
+
+	/* open I/O area window */
+	paddrbase = virt_to_phys((void*)PA_AREA5_IO);
+	psize = PAGE_SIZE;
+	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+	cf0_io_base = (u32)ioremap_prot(paddrbase, psize, pgprot_val(prot));
+	if (!cf0_io_base) {
+		printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ );
+		return -ENOMEM;
+	}
+
+	cf_ide_resources[0].start += cf0_io_base ;
+	cf_ide_resources[0].end   += cf0_io_base ;
+	cf_ide_resources[1].start += cf0_io_base ;
+	cf_ide_resources[1].end   += cf0_io_base ;
+
+	return platform_add_devices(lboxre2_devices,
+			ARRAY_SIZE(lboxre2_devices));
+
+}
+device_initcall(lboxre2_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_lboxre2 __initmv = {
+	.mv_name		= "L-BOX RE2",
+	.mv_init_irq		= init_lboxre2_IRQ,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-microdev/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-microdev/Makefile
new file mode 100644
index 0000000..4e3588e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-microdev/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the SuperH MicroDev specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o io.o fdc37c93xapm.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-microdev/fdc37c93xapm.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-microdev/fdc37c93xapm.c
new file mode 100644
index 0000000..458a7cf
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-microdev/fdc37c93xapm.c
@@ -0,0 +1,160 @@
+/*
+ *
+ * Setup for the SMSC FDC37C93xAPM
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ * Copyright (C) 2003, 2004 SuperH, Inc.
+ * Copyright (C) 2004, 2005 Paul Mundt
+ *
+ * SuperH SH4-202 MicroDev board support.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <mach/microdev.h>
+
+#define SMSC_CONFIG_PORT_ADDR	 (0x3F0)
+#define SMSC_INDEX_PORT_ADDR	 SMSC_CONFIG_PORT_ADDR
+#define SMSC_DATA_PORT_ADDR	 (SMSC_INDEX_PORT_ADDR + 1)
+
+#define SMSC_ENTER_CONFIG_KEY	 0x55
+#define SMSC_EXIT_CONFIG_KEY	 0xaa
+
+#define SMCS_LOGICAL_DEV_INDEX	 0x07	/* Logical Device Number */
+#define SMSC_DEVICE_ID_INDEX	 0x20	/* Device ID */
+#define SMSC_DEVICE_REV_INDEX	 0x21	/* Device Revision */
+#define SMSC_ACTIVATE_INDEX	 0x30	/* Activate */
+#define SMSC_PRIMARY_BASE_INDEX	 0x60	/* Primary Base Address */
+#define SMSC_SECONDARY_BASE_INDEX 0x62	/* Secondary Base Address */
+#define SMSC_PRIMARY_INT_INDEX	 0x70	/* Primary Interrupt Select */
+#define SMSC_SECONDARY_INT_INDEX 0x72	/* Secondary Interrupt Select */
+#define SMSC_HDCS0_INDEX	 0xf0	/* HDCS0 Address Decoder */
+#define SMSC_HDCS1_INDEX	 0xf1	/* HDCS1 Address Decoder */
+
+#define SMSC_IDE1_DEVICE	1	/* IDE #1 logical device */
+#define SMSC_IDE2_DEVICE	2	/* IDE #2 logical device */
+#define SMSC_PARALLEL_DEVICE	3	/* Parallel Port logical device */
+#define SMSC_SERIAL1_DEVICE	4	/* Serial #1 logical device */
+#define SMSC_SERIAL2_DEVICE	5	/* Serial #2 logical device */
+#define SMSC_KEYBOARD_DEVICE	7	/* Keyboard logical device */
+#define SMSC_CONFIG_REGISTERS	8	/* Configuration Registers (Aux I/O) */
+
+#define SMSC_READ_INDEXED(index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	inb(SMSC_DATA_PORT_ADDR); })
+#define SMSC_WRITE_INDEXED(val, index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	outb((val),   SMSC_DATA_PORT_ADDR); })
+
+#define	IDE1_PRIMARY_BASE	0x01f0	/* Task File Registe base for IDE #1 */
+#define	IDE1_SECONDARY_BASE	0x03f6	/* Miscellaneous AT registers for IDE #1 */
+#define	IDE2_PRIMARY_BASE	0x0170	/* Task File Registe base for IDE #2 */
+#define	IDE2_SECONDARY_BASE	0x0376	/* Miscellaneous AT registers for IDE #2 */
+
+#define SERIAL1_PRIMARY_BASE	0x03f8
+#define SERIAL2_PRIMARY_BASE	0x02f8
+
+#define	MSB(x)		( (x) >> 8 )
+#define	LSB(x)		( (x) & 0xff )
+
+	/* General-Purpose base address on CPU-board FPGA */
+#define	MICRODEV_FPGA_GP_BASE		0xa6100000ul
+
+static int __init smsc_superio_setup(void)
+{
+
+	unsigned char devid, devrev;
+
+		/* Initially the chip is in run state */
+		/* Put it into configuration state */
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+		/* Read device ID info */
+	devid  = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
+	devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
+
+	if ((devid == 0x30) && (devrev == 0x01))
+		printk("SMSC FDC37C93xAPM SuperIO device detected\n");
+	else
+		return -ENODEV;
+
+		/* Select the keyboard device */
+	SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* enable the interrupts */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
+
+		/* Select the Serial #1 device */
+	SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* program with port addresses */
+	SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
+		/* enable the interrupts */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
+
+		/* Select the Serial #2 device */
+	SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* program with port addresses */
+	SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
+		/* enable the interrupts */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
+
+		/* Select the IDE#1 device */
+	SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* program with port addresses */
+	SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
+	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
+		/* select the interrupt */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
+
+		/* Select the IDE#2 device */
+	SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* program with port addresses */
+	SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
+		/* select the interrupt */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
+
+		/* Select the configuration registers */
+	SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
+		/* enable the appropriate GPIO pins for IDE functionality:
+		 * bit[0]   In/Out		1==input;  0==output
+		 * bit[1]   Polarity		1==invert; 0==no invert
+		 * bit[2]   Int Enb #1		1==Enable Combined IRQ #1; 0==disable
+		 * bit[3:4] Function Select	00==original; 01==Alternate Function #1
+		 */
+	SMSC_WRITE_INDEXED(0x00, 0xc2);	/* GP42 = nIDE1_OE */
+	SMSC_WRITE_INDEXED(0x01, 0xc5);	/* GP45 = IDE1_IRQ */
+	SMSC_WRITE_INDEXED(0x00, 0xc6);	/* GP46 = nIOROP */
+	SMSC_WRITE_INDEXED(0x00, 0xc7);	/* GP47 = nIOWOP */
+	SMSC_WRITE_INDEXED(0x08, 0xe8);	/* GP20 = nIDE2_OE */
+
+		/* Exit the configuration state */
+	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	return 0;
+}
+device_initcall(smsc_superio_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-microdev/io.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-microdev/io.c
new file mode 100644
index 0000000..acdafb0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-microdev/io.c
@@ -0,0 +1,125 @@
+/*
+ * linux/arch/sh/boards/superh/microdev/io.c
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ * Copyright (C) 2003, 2004 SuperH, Inc.
+ * Copyright (C) 2004 Paul Mundt
+ *
+ * SuperH SH4-202 MicroDev board support.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+#include <mach/microdev.h>
+
+	/*
+	 *	we need to have a 'safe' address to re-direct all I/O requests
+	 *	that we do not explicitly wish to handle. This safe address
+	 *	must have the following properies:
+	 *
+	 *		* writes are ignored (no exception)
+	 *		* reads are benign (no side-effects)
+	 *		* accesses of width 1, 2 and 4-bytes are all valid.
+	 *
+	 *	The Processor Version Register (PVR) has these properties.
+	 */
+#define	PVR	0xff000030	/* Processor Version Register */
+
+
+#define	IO_IDE2_BASE		0x170ul	/* I/O base for SMSC FDC37C93xAPM IDE #2 */
+#define	IO_IDE1_BASE		0x1f0ul	/* I/O base for SMSC FDC37C93xAPM IDE #1 */
+#define IO_ISP1161_BASE		0x290ul /* I/O port for Philips ISP1161x USB chip */
+#define IO_SERIAL2_BASE		0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */
+#define	IO_LAN91C111_BASE	0x300ul	/* I/O base for SMSC LAN91C111 Ethernet chip */
+#define	IO_IDE2_MISC		0x376ul	/* I/O misc for SMSC FDC37C93xAPM IDE #2 */
+#define IO_SUPERIO_BASE		0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */
+#define	IO_IDE1_MISC		0x3f6ul	/* I/O misc for SMSC FDC37C93xAPM IDE #1 */
+#define IO_SERIAL1_BASE		0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */
+
+#define	IO_ISP1161_EXTENT	0x04ul	/* I/O extent for Philips ISP1161x USB chip */
+#define	IO_LAN91C111_EXTENT	0x10ul	/* I/O extent for SMSC LAN91C111 Ethernet chip */
+#define	IO_SUPERIO_EXTENT	0x02ul	/* I/O extent for SMSC FDC37C93xAPM SuperIO chip */
+#define	IO_IDE_EXTENT		0x08ul	/* I/O extent for IDE Task Register set */
+#define IO_SERIAL_EXTENT	0x10ul
+
+#define	IO_LAN91C111_PHYS	0xa7500000ul	/* Physical address of SMSC LAN91C111 Ethernet chip */
+#define	IO_ISP1161_PHYS		0xa7700000ul	/* Physical address of Philips ISP1161x USB chip */
+#define	IO_SUPERIO_PHYS		0xa7800000ul	/* Physical address of SMSC FDC37C93xAPM SuperIO chip */
+
+/*
+ * map I/O ports to memory-mapped addresses
+ */
+void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
+{
+	unsigned long result;
+
+	if ((offset >= IO_LAN91C111_BASE) &&
+	    (offset <  IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
+			/*
+			 *	SMSC LAN91C111 Ethernet chip
+			 */
+		result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
+	} else if ((offset >= IO_SUPERIO_BASE) &&
+		   (offset <  IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
+			/*
+			 *	SMSC FDC37C93xAPM SuperIO chip
+			 *
+			 *	Configuration Registers
+			 */
+		result = IO_SUPERIO_PHYS + (offset << 1);
+	} else if (((offset >= IO_IDE1_BASE) &&
+		    (offset <  IO_IDE1_BASE + IO_IDE_EXTENT)) ||
+		    (offset == IO_IDE1_MISC)) {
+			/*
+			 *	SMSC FDC37C93xAPM SuperIO chip
+			 *
+			 *	IDE #1
+			 */
+	        result = IO_SUPERIO_PHYS + (offset << 1);
+	} else if (((offset >= IO_IDE2_BASE) &&
+		    (offset <  IO_IDE2_BASE + IO_IDE_EXTENT)) ||
+		    (offset == IO_IDE2_MISC)) {
+			/*
+			 *	SMSC FDC37C93xAPM SuperIO chip
+			 *
+			 *	IDE #2
+			 */
+	        result = IO_SUPERIO_PHYS + (offset << 1);
+	} else if ((offset >= IO_SERIAL1_BASE) &&
+		   (offset <  IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
+			/*
+			 *	SMSC FDC37C93xAPM SuperIO chip
+			 *
+			 *	Serial #1
+			 */
+		result = IO_SUPERIO_PHYS + (offset << 1);
+	} else if ((offset >= IO_SERIAL2_BASE) &&
+		   (offset <  IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
+			/*
+			 *	SMSC FDC37C93xAPM SuperIO chip
+			 *
+			 *	Serial #2
+			 */
+		result = IO_SUPERIO_PHYS + (offset << 1);
+	} else if ((offset >= IO_ISP1161_BASE) &&
+		   (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
+			/*
+			 *	Philips USB ISP1161x chip
+			 */
+		result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
+	} else {
+			/*
+			 *	safe default.
+			 */
+		printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
+		       __func__, offset);
+		result = PVR;
+	}
+
+	return (void __iomem *)result;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-microdev/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-microdev/irq.c
new file mode 100644
index 0000000..9a8aff3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-microdev/irq.c
@@ -0,0 +1,152 @@
+/*
+ * arch/sh/boards/superh/microdev/irq.c
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ *
+ * SuperH SH4-202 MicroDev board support.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <mach/microdev.h>
+
+#define NUM_EXTERNAL_IRQS 16	/* IRL0 .. IRL15 */
+
+static const struct {
+	unsigned char fpgaIrq;
+	unsigned char mapped;
+	const char *name;
+} fpgaIrqTable[NUM_EXTERNAL_IRQS] = {
+	{ 0,				0,	"unused"   },		/* IRQ #0	IRL=15	0x200  */
+	{ MICRODEV_FPGA_IRQ_KEYBOARD,	1,	"keyboard" },		/* IRQ #1	IRL=14	0x220  */
+	{ MICRODEV_FPGA_IRQ_SERIAL1,	1,	"Serial #1"},		/* IRQ #2	IRL=13	0x240  */
+	{ MICRODEV_FPGA_IRQ_ETHERNET,	1,	"Ethernet" },		/* IRQ #3	IRL=12	0x260  */
+	{ MICRODEV_FPGA_IRQ_SERIAL2,	0,	"Serial #2"},		/* IRQ #4	IRL=11	0x280  */
+	{ 0,				0,	"unused"   },		/* IRQ #5	IRL=10	0x2a0  */
+	{ 0,				0,	"unused"   },		/* IRQ #6	IRL=9	0x2c0  */
+	{ MICRODEV_FPGA_IRQ_USB_HC,	1,	"USB"	   },		/* IRQ #7	IRL=8	0x2e0  */
+	{ MICRODEV_IRQ_PCI_INTA,	1,	"PCI INTA" },		/* IRQ #8	IRL=7	0x300  */
+	{ MICRODEV_IRQ_PCI_INTB,	1,	"PCI INTB" },		/* IRQ #9	IRL=6	0x320  */
+	{ MICRODEV_IRQ_PCI_INTC,	1,	"PCI INTC" },		/* IRQ #10	IRL=5	0x340  */
+	{ MICRODEV_IRQ_PCI_INTD,	1,	"PCI INTD" },		/* IRQ #11	IRL=4	0x360  */
+	{ MICRODEV_FPGA_IRQ_MOUSE,	1,	"mouse"    },		/* IRQ #12	IRL=3	0x380  */
+	{ MICRODEV_FPGA_IRQ_IDE2,	1,	"IDE #2"   },		/* IRQ #13	IRL=2	0x3a0  */
+	{ MICRODEV_FPGA_IRQ_IDE1,	1,	"IDE #1"   },		/* IRQ #14	IRL=1	0x3c0  */
+	{ 0,				0,	"unused"   },		/* IRQ #15	IRL=0	0x3e0  */
+};
+
+#if (MICRODEV_LINUX_IRQ_KEYBOARD != 1)
+#  error Inconsistancy in defining the IRQ# for Keyboard!
+#endif
+
+#if (MICRODEV_LINUX_IRQ_ETHERNET != 3)
+#  error Inconsistancy in defining the IRQ# for Ethernet!
+#endif
+
+#if (MICRODEV_LINUX_IRQ_USB_HC != 7)
+#  error Inconsistancy in defining the IRQ# for USB!
+#endif
+
+#if (MICRODEV_LINUX_IRQ_MOUSE != 12)
+#  error Inconsistancy in defining the IRQ# for PS/2 Mouse!
+#endif
+
+#if (MICRODEV_LINUX_IRQ_IDE2 != 13)
+#  error Inconsistancy in defining the IRQ# for secondary IDE!
+#endif
+
+#if (MICRODEV_LINUX_IRQ_IDE1 != 14)
+#  error Inconsistancy in defining the IRQ# for primary IDE!
+#endif
+
+static void disable_microdev_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned int fpgaIrq;
+
+	if (irq >= NUM_EXTERNAL_IRQS)
+		return;
+	if (!fpgaIrqTable[irq].mapped)
+		return;
+
+	fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
+
+	/* disable interrupts on the FPGA INTC register */
+	__raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
+}
+
+static void enable_microdev_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned long priorityReg, priorities, pri;
+	unsigned int fpgaIrq;
+
+	if (unlikely(irq >= NUM_EXTERNAL_IRQS))
+		return;
+	if (unlikely(!fpgaIrqTable[irq].mapped))
+		return;
+
+	pri = 15 - irq;
+
+	fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
+	priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq);
+
+	/* set priority for the interrupt */
+	priorities = __raw_readl(priorityReg);
+	priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq);
+	priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri);
+	__raw_writel(priorities, priorityReg);
+
+	/* enable interrupts on the FPGA INTC register */
+	__raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
+}
+
+static struct irq_chip microdev_irq_type = {
+	.name = "MicroDev-IRQ",
+	.irq_unmask = enable_microdev_irq,
+	.irq_mask = disable_microdev_irq,
+};
+
+/* This function sets the desired irq handler to be a MicroDev type */
+static void __init make_microdev_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_set_chip_and_handler(irq, &microdev_irq_type, handle_level_irq);
+	disable_microdev_irq(irq_get_irq_data(irq));
+}
+
+extern void __init init_microdev_irq(void)
+{
+	int i;
+
+	/* disable interrupts on the FPGA INTC register */
+	__raw_writel(~0ul, MICRODEV_FPGA_INTDSB_REG);
+
+	for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
+		make_microdev_irq(i);
+}
+
+extern void microdev_print_fpga_intc_status(void)
+{
+	volatile unsigned int * const intenb = (unsigned int*)MICRODEV_FPGA_INTENB_REG;
+	volatile unsigned int * const intdsb = (unsigned int*)MICRODEV_FPGA_INTDSB_REG;
+	volatile unsigned int * const intpria = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(0);
+	volatile unsigned int * const intprib = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(8);
+	volatile unsigned int * const intpric = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(16);
+	volatile unsigned int * const intprid = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(24);
+	volatile unsigned int * const intsrc = (unsigned int*)MICRODEV_FPGA_INTSRC_REG;
+	volatile unsigned int * const intreq = (unsigned int*)MICRODEV_FPGA_INTREQ_REG;
+
+	printk("-------------------------- microdev_print_fpga_intc_status() ------------------\n");
+	printk("FPGA_INTENB = 0x%08x\n", *intenb);
+	printk("FPGA_INTDSB = 0x%08x\n", *intdsb);
+	printk("FPGA_INTSRC = 0x%08x\n", *intsrc);
+	printk("FPGA_INTREQ = 0x%08x\n", *intreq);
+	printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria);
+	printk("-------------------------------------------------------------------------------\n");
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-microdev/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-microdev/setup.c
new file mode 100644
index 0000000..6c66ee4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-microdev/setup.c
@@ -0,0 +1,199 @@
+/*
+ * arch/sh/boards/superh/microdev/setup.c
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ * Copyright (C) 2003, 2004 SuperH, Inc.
+ * Copyright (C) 2004, 2005 Paul Mundt
+ *
+ * SuperH SH4-202 MicroDev board support.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <video/s1d13xxxfb.h>
+#include <mach/microdev.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start		= 0x300,
+		.end		= 0x300 + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= MICRODEV_LINUX_IRQ_ETHERNET,
+		.end		= MICRODEV_LINUX_IRQ_ETHERNET,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct s1d13xxxfb_regval s1d13806_initregs[] = {
+	{ S1DREG_MISC,			0x00 },
+	{ S1DREG_COM_DISP_MODE,		0x00 },
+	{ S1DREG_GPIO_CNF0,		0x00 },
+	{ S1DREG_GPIO_CNF1,		0x00 },
+	{ S1DREG_GPIO_CTL0,		0x00 },
+	{ S1DREG_GPIO_CTL1,		0x00 },
+	{ S1DREG_CLK_CNF,		0x02 },
+	{ S1DREG_LCD_CLK_CNF,		0x01 },
+	{ S1DREG_CRT_CLK_CNF,		0x03 },
+	{ S1DREG_MPLUG_CLK_CNF,		0x03 },
+	{ S1DREG_CPU2MEM_WST_SEL,	0x02 },
+	{ S1DREG_SDRAM_REF_RATE,	0x03 },
+	{ S1DREG_SDRAM_TC0,		0x00 },
+	{ S1DREG_SDRAM_TC1,		0x01 },
+	{ S1DREG_MEM_CNF,		0x80 },
+	{ S1DREG_PANEL_TYPE,		0x25 },
+	{ S1DREG_MOD_RATE,		0x00 },
+	{ S1DREG_LCD_DISP_HWIDTH,	0x63 },
+	{ S1DREG_LCD_NDISP_HPER,	0x1e },
+	{ S1DREG_TFT_FPLINE_START,	0x06 },
+	{ S1DREG_TFT_FPLINE_PWIDTH,	0x03 },
+	{ S1DREG_LCD_DISP_VHEIGHT0,	0x57 },
+	{ S1DREG_LCD_DISP_VHEIGHT1,	0x02 },
+	{ S1DREG_LCD_NDISP_VPER,	0x00 },
+	{ S1DREG_TFT_FPFRAME_START,	0x0a },
+	{ S1DREG_TFT_FPFRAME_PWIDTH,	0x81 },
+	{ S1DREG_LCD_DISP_MODE,		0x03 },
+	{ S1DREG_LCD_MISC,		0x00 },
+	{ S1DREG_LCD_DISP_START0,	0x00 },
+	{ S1DREG_LCD_DISP_START1,	0x00 },
+	{ S1DREG_LCD_DISP_START2,	0x00 },
+	{ S1DREG_LCD_MEM_OFF0,		0x90 },
+	{ S1DREG_LCD_MEM_OFF1,		0x01 },
+	{ S1DREG_LCD_PIX_PAN,		0x00 },
+	{ S1DREG_LCD_DISP_FIFO_HTC,	0x00 },
+	{ S1DREG_LCD_DISP_FIFO_LTC,	0x00 },
+	{ S1DREG_CRT_DISP_HWIDTH,	0x63 },
+	{ S1DREG_CRT_NDISP_HPER,	0x1f },
+	{ S1DREG_CRT_HRTC_START,	0x04 },
+	{ S1DREG_CRT_HRTC_PWIDTH,	0x8f },
+	{ S1DREG_CRT_DISP_VHEIGHT0,	0x57 },
+	{ S1DREG_CRT_DISP_VHEIGHT1,	0x02 },
+	{ S1DREG_CRT_NDISP_VPER,	0x1b },
+	{ S1DREG_CRT_VRTC_START,	0x00 },
+	{ S1DREG_CRT_VRTC_PWIDTH,	0x83 },
+	{ S1DREG_TV_OUT_CTL,		0x10 },
+	{ S1DREG_CRT_DISP_MODE,		0x05 },
+	{ S1DREG_CRT_DISP_START0,	0x00 },
+	{ S1DREG_CRT_DISP_START1,	0x00 },
+	{ S1DREG_CRT_DISP_START2,	0x00 },
+	{ S1DREG_CRT_MEM_OFF0,		0x20 },
+	{ S1DREG_CRT_MEM_OFF1,		0x03 },
+	{ S1DREG_CRT_PIX_PAN,		0x00 },
+	{ S1DREG_CRT_DISP_FIFO_HTC,	0x00 },
+	{ S1DREG_CRT_DISP_FIFO_LTC,	0x00 },
+	{ S1DREG_LCD_CUR_CTL,		0x00 },
+	{ S1DREG_LCD_CUR_START,		0x01 },
+	{ S1DREG_LCD_CUR_XPOS0,		0x00 },
+	{ S1DREG_LCD_CUR_XPOS1,		0x00 },
+	{ S1DREG_LCD_CUR_YPOS0,		0x00 },
+	{ S1DREG_LCD_CUR_YPOS1,		0x00 },
+	{ S1DREG_LCD_CUR_BCTL0,		0x00 },
+	{ S1DREG_LCD_CUR_GCTL0,		0x00 },
+	{ S1DREG_LCD_CUR_RCTL0,		0x00 },
+	{ S1DREG_LCD_CUR_BCTL1,		0x1f },
+	{ S1DREG_LCD_CUR_GCTL1,		0x3f },
+	{ S1DREG_LCD_CUR_RCTL1,		0x1f },
+	{ S1DREG_LCD_CUR_FIFO_HTC,	0x00 },
+	{ S1DREG_CRT_CUR_CTL,		0x00 },
+	{ S1DREG_CRT_CUR_START,		0x01 },
+	{ S1DREG_CRT_CUR_XPOS0,		0x00 },
+	{ S1DREG_CRT_CUR_XPOS1,		0x00 },
+	{ S1DREG_CRT_CUR_YPOS0,		0x00 },
+	{ S1DREG_CRT_CUR_YPOS1,		0x00 },
+	{ S1DREG_CRT_CUR_BCTL0,		0x00 },
+	{ S1DREG_CRT_CUR_GCTL0,		0x00 },
+	{ S1DREG_CRT_CUR_RCTL0,		0x00 },
+	{ S1DREG_CRT_CUR_BCTL1,		0x1f },
+	{ S1DREG_CRT_CUR_GCTL1,		0x3f },
+	{ S1DREG_CRT_CUR_RCTL1,		0x1f },
+	{ S1DREG_CRT_CUR_FIFO_HTC,	0x00 },
+	{ S1DREG_BBLT_CTL0,		0x00 },
+	{ S1DREG_BBLT_CTL1,		0x00 },
+	{ S1DREG_BBLT_CC_EXP,		0x00 },
+	{ S1DREG_BBLT_OP,		0x00 },
+	{ S1DREG_BBLT_SRC_START0,	0x00 },
+	{ S1DREG_BBLT_SRC_START1,	0x00 },
+	{ S1DREG_BBLT_SRC_START2,	0x00 },
+	{ S1DREG_BBLT_DST_START0,	0x00 },
+	{ S1DREG_BBLT_DST_START1,	0x00 },
+	{ S1DREG_BBLT_DST_START2,	0x00 },
+	{ S1DREG_BBLT_MEM_OFF0,		0x00 },
+	{ S1DREG_BBLT_MEM_OFF1,		0x00 },
+	{ S1DREG_BBLT_WIDTH0,		0x00 },
+	{ S1DREG_BBLT_WIDTH1,		0x00 },
+	{ S1DREG_BBLT_HEIGHT0,		0x00 },
+	{ S1DREG_BBLT_HEIGHT1,		0x00 },
+	{ S1DREG_BBLT_BGC0,		0x00 },
+	{ S1DREG_BBLT_BGC1,		0x00 },
+	{ S1DREG_BBLT_FGC0,		0x00 },
+	{ S1DREG_BBLT_FGC1,		0x00 },
+	{ S1DREG_LKUP_MODE,		0x00 },
+	{ S1DREG_LKUP_ADDR,		0x00 },
+	{ S1DREG_PS_CNF,		0x10 },
+	{ S1DREG_PS_STATUS,		0x00 },
+	{ S1DREG_CPU2MEM_WDOGT,		0x00 },
+	{ S1DREG_COM_DISP_MODE,		0x02 },
+};
+
+static struct s1d13xxxfb_pdata s1d13806_platform_data = {
+	.initregs	= s1d13806_initregs,
+	.initregssize	= ARRAY_SIZE(s1d13806_initregs),
+};
+
+static struct resource s1d13806_resources[] = {
+	[0] = {
+		.start		= 0x07200000,
+		.end		= 0x07200000 + SZ_2M - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 0x07000000,
+		.end		= 0x07000000 + SZ_2M - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device s1d13806_device = {
+	.name		= "s1d13806fb",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s1d13806_resources),
+	.resource	= s1d13806_resources,
+
+	.dev = {
+		.platform_data	= &s1d13806_platform_data,
+	},
+};
+
+static struct platform_device *microdev_devices[] __initdata = {
+	&smc91x_device,
+	&s1d13806_device,
+};
+
+static int __init microdev_devices_setup(void)
+{
+	return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
+}
+device_initcall(microdev_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sh4202_microdev __initmv = {
+	.mv_name		= "SH4-202 MicroDev",
+	.mv_ioport_map		= microdev_ioport_map,
+	.mv_init_irq		= init_microdev_irq,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-migor/Kconfig b/src/kernel/linux/v4.14/arch/sh/boards/mach-migor/Kconfig
new file mode 100644
index 0000000..fb64a10
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-migor/Kconfig
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+if SH_MIGOR
+
+choice
+	prompt "Migo-R LCD Panel Board Selection"
+	default SH_MIGOR_QVGA
+
+config SH_MIGOR_QVGA
+	bool "QVGA (320x240)"
+
+config SH_MIGOR_RTA_WVGA
+	bool "RTA WVGA (800x480)"
+
+endchoice
+
+endif
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-migor/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-migor/Makefile
new file mode 100644
index 0000000..4601a89
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-migor/Makefile
@@ -0,0 +1,2 @@
+obj-y	 := setup.o sdram.o
+obj-$(CONFIG_SH_MIGOR_QVGA)	+=  lcd_qvga.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-migor/lcd_qvga.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-migor/lcd_qvga.c
new file mode 100644
index 0000000..8bccd34
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-migor/lcd_qvga.c
@@ -0,0 +1,166 @@
+/*
+ * Support for SuperH MigoR Quarter VGA LCD Panel
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
+ * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <video/sh_mobile_lcdc.h>
+#include <cpu/sh7722.h>
+#include <mach/migor.h>
+
+/* LCD Module is a PH240320T according to board schematics. This module
+ * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
+ * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
+ * SYS-80 interface configured in 16 bit mode.
+ *
+ * Index 0: "Device Code Read" returns 0x1505.
+ */
+
+static void reset_lcd_module(void)
+{
+	gpio_set_value(GPIO_PTH2, 0);
+	mdelay(2);
+	gpio_set_value(GPIO_PTH2, 1);
+	mdelay(1);
+}
+
+/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
+
+static unsigned long adjust_reg18(unsigned short data)
+{
+	unsigned long tmp1, tmp2;
+
+	tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
+	tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
+	return tmp1 | tmp2;
+}
+
+static void write_reg(void *sys_ops_handle,
+		       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+		       unsigned short reg, unsigned short data)
+{
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
+}
+
+static void write_reg16(void *sys_ops_handle,
+			struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+			unsigned short reg, unsigned short data)
+{
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+	sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
+}
+
+static unsigned long read_reg16(void *sys_ops_handle,
+				struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+				unsigned short reg)
+{
+	unsigned long data;
+
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+	data = sys_ops->read_data(sys_ops_handle);
+	return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
+}
+
+static void migor_lcd_qvga_seq(void *sys_ops_handle,
+			       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+			       unsigned short const *data, int no_data)
+{
+	int i;
+
+	for (i = 0; i < no_data; i += 2)
+		write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
+}
+
+static const unsigned short sync_data[] = {
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static const unsigned short magic0_data[] = {
+	0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
+	0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
+	0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
+};
+
+static const unsigned short magic1_data[] = {
+	0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
+	0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
+	0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
+	0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
+	0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
+	0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
+	0x0015, 0x8000,
+};
+
+static const unsigned short magic2_data[] = {
+	0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
+};
+
+static const unsigned short magic3_data[] = {
+	0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
+};
+
+int migor_lcd_qvga_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	unsigned long xres = 320;
+	unsigned long yres = 240;
+	int k;
+
+	reset_lcd_module();
+	migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+
+	if (read_reg16(sohandle, so, 0) != 0x1505)
+		return -ENODEV;
+
+	pr_info("Migo-R QVGA LCD Module detected.\n");
+
+	migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+	write_reg16(sohandle, so, 0x00A4, 0x0001);
+	mdelay(10);
+
+	migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
+	mdelay(100);
+
+	migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
+	write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
+	write_reg16(sohandle, so, 0x0051, 0x00ef);
+	write_reg16(sohandle, so, 0x0052, 0x0000);
+	write_reg16(sohandle, so, 0x0053, xres - 1);
+
+	migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
+	mdelay(10);
+
+	migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
+	mdelay(40);
+
+	/* clear GRAM to avoid displaying garbage */
+
+	write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
+	write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
+
+	for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
+		write_reg16(sohandle, so, 0x0022, 0x0000);
+
+	write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
+	write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
+	write_reg16(sohandle, so, 0x0007, 0x0173);
+	mdelay(40);
+
+	/* enable display */
+	write_reg(sohandle, so, 0x00, 0x22);
+	mdelay(100);
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-migor/sdram.S b/src/kernel/linux/v4.14/arch/sh/boards/mach-migor/sdram.S
new file mode 100644
index 0000000..614aa3a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-migor/sdram.S
@@ -0,0 +1,69 @@
+/*
+ * Migo-R sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(migor_sdram_enter_start)
+
+	/* SBSC: disable power down and put in self-refresh mode */
+	mov.l	1f, r4
+	mov.l	2f, r1
+	mov.l	@r4, r2
+	or	r1, r2
+	mov.l   3f, r3
+	and	r3, r2
+	mov.l	r2, @r4
+
+	rts
+	 nop
+
+	.balign 4
+1:	.long	0xfe400008 /* SDCR0 */
+2:	.long	0x00000400
+3:	.long	0xffff7fff
+ENTRY(migor_sdram_enter_end)
+
+	.balign 4
+ENTRY(migor_sdram_leave_start)
+
+	/* SBSC: set auto-refresh mode */
+	mov.l	1f, r4
+	mov.l	@r4, r0
+	mov.l   4f, r1
+	and	r1, r0
+	mov.l	r0, @r4
+	mov.l	6f, r4
+	mov.l	8f, r0
+	mov.l	@r4, r1
+	mov	#-1, r4
+	add	r4, r1
+	or	r1, r0
+	mov.l	7f, r1
+	mov.l	r0, @r1
+
+	rts
+	 nop
+
+	.balign 4
+1:	.long	0xfe400008 /* SDCR0 */
+4:	.long	0xfffffbff
+6:	.long   0xfe40001c /* RTCOR */
+7:	.long   0xfe400018 /* RTCNT */
+8:	.long   0xa55a0000
+ENTRY(migor_sdram_leave_end)
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-migor/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-migor/setup.c
new file mode 100644
index 0000000..0bcbe58
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-migor/setup.c
@@ -0,0 +1,674 @@
+/*
+ * Renesas System Solutions Asia Pte. Ltd - Migo-R
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/mmc/host.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/i2c.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smc91x.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/videodev2.h>
+#include <linux/sh_intc.h>
+#include <video/sh_mobile_lcdc.h>
+#include <media/drv-intf/sh_mobile_ceu.h>
+#include <media/i2c/ov772x.h>
+#include <media/soc_camera.h>
+#include <media/i2c/tw9910.h>
+#include <asm/clock.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/suspend.h>
+#include <mach/migor.h>
+#include <cpu/sh7722.h>
+
+/* Address     IRQ  Size  Bus  Description
+ * 0x00000000       64MB  16   NOR Flash (SP29PL256N)
+ * 0x0c000000       64MB  64   SDRAM (2xK4M563233G)
+ * 0x10000000  IRQ0       16   Ethernet (SMC91C111)
+ * 0x14000000  IRQ4       16   USB 2.0 Host Controller (M66596)
+ * 0x18000000       8GB    8   NAND Flash (K9K8G08U0A)
+ */
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "SMC91C111" ,
+		.start  = 0x10000300,
+		.end    = 0x1000030f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x600), /* IRQ0 */
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+static struct sh_keysc_info sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
+	.scan_timing = 3,
+	.delay = 5,
+	.keycodes = {
+		0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
+		0, KEY_F, KEY_C, KEY_D,	KEY_H, KEY_1,
+		0, KEY_2, KEY_3, KEY_4,	KEY_5, KEY_6,
+		0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
+		0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
+	},
+};
+
+static struct resource sh_keysc_resources[] = {
+	[0] = {
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xbe0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
+	.resource       = sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &sh_keysc_info,
+	},
+};
+
+static struct mtd_partition migor_nor_flash_partitions[] =
+{
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = (1 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name = "rootfs",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (15 * 1024 * 1024),
+	},
+	{
+		.name = "other",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data migor_nor_flash_data = {
+	.width		= 2,
+	.parts		= migor_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(migor_nor_flash_partitions),
+};
+
+static struct resource migor_nor_flash_resources[] = {
+	[0] = {
+		.name		= "NOR Flash",
+		.start		= 0x00000000,
+		.end		= 0x03ffffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device migor_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= migor_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(migor_nor_flash_resources),
+	.dev		= {
+		.platform_data = &migor_nor_flash_data,
+	},
+};
+
+static struct mtd_partition migor_nand_flash_partitions[] = {
+	{
+		.name		= "nanddata1",
+		.offset		= 0x0,
+		.size		= 512 * 1024 * 1024,
+	},
+	{
+		.name		= "nanddata2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024 * 1024,
+	},
+};
+
+static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd,
+				     unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, chip->IO_ADDR_W + 0x00400000);
+	else if (ctrl & NAND_ALE)
+		writeb(cmd, chip->IO_ADDR_W + 0x00800000);
+	else
+		writeb(cmd, chip->IO_ADDR_W);
+}
+
+static int migor_nand_flash_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(GPIO_PTA1); /* NAND_RBn */
+}
+
+static struct platform_nand_data migor_nand_flash_data = {
+	.chip = {
+		.nr_chips = 1,
+		.partitions = migor_nand_flash_partitions,
+		.nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
+		.chip_delay = 20,
+	},
+	.ctrl = {
+		.dev_ready = migor_nand_flash_ready,
+		.cmd_ctrl = migor_nand_flash_cmd_ctl,
+	},
+};
+
+static struct resource migor_nand_flash_resources[] = {
+	[0] = {
+		.name		= "NAND Flash",
+		.start		= 0x18000000,
+		.end		= 0x18ffffff,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device migor_nand_flash_device = {
+	.name		= "gen_nand",
+	.resource	= migor_nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(migor_nand_flash_resources),
+	.dev		= {
+		.platform_data = &migor_nand_flash_data,
+	}
+};
+
+static const struct fb_videomode migor_lcd_modes[] = {
+	{
+#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
+		.name = "LB070WV1",
+		.xres = 800,
+		.yres = 480,
+		.left_margin = 64,
+		.right_margin = 16,
+		.hsync_len = 120,
+		.sync = 0,
+#elif defined(CONFIG_SH_MIGOR_QVGA)
+		.name = "PH240320T",
+		.xres = 320,
+		.yres = 240,
+		.left_margin = 0,
+		.right_margin = 16,
+		.hsync_len = 8,
+		.sync = FB_SYNC_HOR_HIGH_ACT,
+#endif
+		.upper_margin = 1,
+		.lower_margin = 17,
+		.vsync_len = 2,
+	},
+};
+
+static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
+#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.interface_type = RGB16,
+		.clock_divider = 2,
+		.lcd_modes = migor_lcd_modes,
+		.num_modes = ARRAY_SIZE(migor_lcd_modes),
+		.panel_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+	}
+#elif defined(CONFIG_SH_MIGOR_QVGA)
+	.clock_source = LCDC_CLK_PERIPHERAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.interface_type = SYS16A,
+		.clock_divider = 10,
+		.lcd_modes = migor_lcd_modes,
+		.num_modes = ARRAY_SIZE(migor_lcd_modes),
+		.panel_cfg = {
+			.width = 49,	/* 2.4 inch */
+			.height = 37,
+			.setup_sys = migor_lcd_qvga_setup,
+		},
+		.sys_bus_cfg = {
+			.ldmt2r = 0x06000a09,
+			.ldmt3r = 0x180e3418,
+			/* set 1s delay to encourage fsync() */
+			.deferred_io_msec = 1000,
+		},
+	}
+#endif
+};
+
+static struct resource migor_lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device migor_lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(migor_lcdc_resources),
+	.resource	= migor_lcdc_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_lcdc_info,
+	},
+};
+
+static struct clk *camera_clk;
+static DEFINE_MUTEX(camera_lock);
+
+static void camera_power_on(int is_tw)
+{
+	mutex_lock(&camera_lock);
+
+	/* Use 10 MHz VIO_CKO instead of 24 MHz to work
+	 * around signal quality issues on Panel Board V2.1.
+	 */
+	camera_clk = clk_get(NULL, "video_clk");
+	clk_set_rate(camera_clk, 10000000);
+	clk_enable(camera_clk);	/* start VIO_CKO */
+
+	/* use VIO_RST to take camera out of reset */
+	mdelay(10);
+	if (is_tw) {
+		gpio_set_value(GPIO_PTT2, 0);
+		gpio_set_value(GPIO_PTT0, 0);
+	} else {
+		gpio_set_value(GPIO_PTT0, 1);
+	}
+	gpio_set_value(GPIO_PTT3, 0);
+	mdelay(10);
+	gpio_set_value(GPIO_PTT3, 1);
+	mdelay(10); /* wait to let chip come out of reset */
+}
+
+static void camera_power_off(void)
+{
+	clk_disable(camera_clk); /* stop VIO_CKO */
+	clk_put(camera_clk);
+
+	gpio_set_value(GPIO_PTT3, 0);
+	mutex_unlock(&camera_lock);
+}
+
+static int ov7725_power(struct device *dev, int mode)
+{
+	if (mode)
+		camera_power_on(0);
+	else
+		camera_power_off();
+
+	return 0;
+}
+
+static int tw9910_power(struct device *dev, int mode)
+{
+	if (mode)
+		camera_power_on(1);
+	else
+		camera_power_off();
+
+	return 0;
+}
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource migor_ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x880),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device migor_ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(migor_ceu_resources),
+	.resource	= migor_ceu_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
+/* Fixed 3.3V regulator to be used by SDHI0 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct resource sdhi_cn9_resources[] = {
+	[0] = {
+		.name	= "SDHI",
+		.start	= 0x04ce0000,
+		.end	= 0x04ce00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xe80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct tmio_mmc_data sh7724_sdhi_data = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
+	.capabilities	= MMC_CAP_SDIO_IRQ,
+};
+
+static struct platform_device sdhi_cn9_device = {
+	.name		= "sh_mobile_sdhi",
+	.num_resources	= ARRAY_SIZE(sdhi_cn9_resources),
+	.resource	= sdhi_cn9_resources,
+	.dev = {
+		.platform_data	= &sh7724_sdhi_data,
+	},
+};
+
+static struct i2c_board_info migor_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372b", 0x32),
+	},
+	{
+		I2C_BOARD_INFO("migor_ts", 0x51),
+		.irq = evt2irq(0x6c0), /* IRQ6 */
+	},
+	{
+		I2C_BOARD_INFO("wm8978", 0x1a),
+	},
+};
+
+static struct i2c_board_info migor_i2c_camera[] = {
+	{
+		I2C_BOARD_INFO("ov772x", 0x21),
+	},
+	{
+		I2C_BOARD_INFO("tw9910", 0x45),
+	},
+};
+
+static struct ov772x_camera_info ov7725_info;
+
+static struct soc_camera_link ov7725_link = {
+	.power		= ov7725_power,
+	.board_info	= &migor_i2c_camera[0],
+	.i2c_adapter_id	= 0,
+	.priv		= &ov7725_info,
+};
+
+static struct tw9910_video_info tw9910_info = {
+	.buswidth	= SOCAM_DATAWIDTH_8,
+	.mpout		= TW9910_MPO_FIELD,
+};
+
+static struct soc_camera_link tw9910_link = {
+	.power		= tw9910_power,
+	.board_info	= &migor_i2c_camera[1],
+	.i2c_adapter_id	= 0,
+	.priv		= &tw9910_info,
+};
+
+static struct platform_device migor_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &ov7725_link,
+		},
+	}, {
+		.name	= "soc-camera-pdrv",
+		.id	= 1,
+		.dev	= {
+			.platform_data = &tw9910_link,
+		},
+	},
+};
+
+static struct platform_device *migor_devices[] __initdata = {
+	&smc91x_eth_device,
+	&sh_keysc_device,
+	&migor_lcdc_device,
+	&migor_ceu_device,
+	&migor_nor_flash_device,
+	&migor_nand_flash_device,
+	&sdhi_cn9_device,
+	&migor_camera[0],
+	&migor_camera[1],
+};
+
+extern char migor_sdram_enter_start;
+extern char migor_sdram_enter_end;
+extern char migor_sdram_leave_start;
+extern char migor_sdram_leave_end;
+
+static int __init migor_devices_setup(void)
+{
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+					&migor_sdram_enter_start,
+					&migor_sdram_enter_end,
+					&migor_sdram_leave_start,
+					&migor_sdram_leave_end);
+
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
+	/* Let D11 LED show STATUS0 */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* Lit D12 LED show PDSTATUS */
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+
+	/* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
+	gpio_request(GPIO_FN_IRQ0, NULL);
+	__raw_writel(0x00003400, BSC_CS4BCR);
+	__raw_writel(0x00110080, BSC_CS4WCR);
+
+	/* KEYSC */
+	gpio_request(GPIO_FN_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYIN1, NULL);
+	gpio_request(GPIO_FN_KEYIN2, NULL);
+	gpio_request(GPIO_FN_KEYIN3, NULL);
+	gpio_request(GPIO_FN_KEYIN4, NULL);
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+
+	/* NAND Flash */
+	gpio_request(GPIO_FN_CS6A_CE2B, NULL);
+	__raw_writel((__raw_readl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
+	gpio_request(GPIO_PTA1, NULL);
+	gpio_direction_input(GPIO_PTA1);
+
+	/* SDHI */
+	gpio_request(GPIO_FN_SDHICD, NULL);
+	gpio_request(GPIO_FN_SDHIWP, NULL);
+	gpio_request(GPIO_FN_SDHID3, NULL);
+	gpio_request(GPIO_FN_SDHID2, NULL);
+	gpio_request(GPIO_FN_SDHID1, NULL);
+	gpio_request(GPIO_FN_SDHID0, NULL);
+	gpio_request(GPIO_FN_SDHICMD, NULL);
+	gpio_request(GPIO_FN_SDHICLK, NULL);
+
+	/* Touch Panel */
+	gpio_request(GPIO_FN_IRQ6, NULL);
+
+	/* LCD Panel */
+#ifdef CONFIG_SH_MIGOR_QVGA /* LCDC - QVGA - Enable SYS Interface signals */
+	gpio_request(GPIO_FN_LCDD17, NULL);
+	gpio_request(GPIO_FN_LCDD16, NULL);
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDRS, NULL);
+	gpio_request(GPIO_FN_LCDCS, NULL);
+	gpio_request(GPIO_FN_LCDRD, NULL);
+	gpio_request(GPIO_FN_LCDWR, NULL);
+	gpio_request(GPIO_PTH2, NULL); /* LCD_DON */
+	gpio_direction_output(GPIO_PTH2, 1);
+#endif
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA /* LCDC - WVGA - Enable RGB Interface signals */
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD9, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDD0, NULL);
+	gpio_request(GPIO_FN_LCDLCLK, NULL);
+	gpio_request(GPIO_FN_LCDDCK, NULL);
+	gpio_request(GPIO_FN_LCDVEPWC, NULL);
+	gpio_request(GPIO_FN_LCDVCPWC, NULL);
+	gpio_request(GPIO_FN_LCDVSYN, NULL);
+	gpio_request(GPIO_FN_LCDHSYN, NULL);
+	gpio_request(GPIO_FN_LCDDISP, NULL);
+	gpio_request(GPIO_FN_LCDDON, NULL);
+#endif
+
+	/* CEU */
+	gpio_request(GPIO_FN_VIO_CLK2, NULL);
+	gpio_request(GPIO_FN_VIO_VD2, NULL);
+	gpio_request(GPIO_FN_VIO_HD2, NULL);
+	gpio_request(GPIO_FN_VIO_FLD, NULL);
+	gpio_request(GPIO_FN_VIO_CKO, NULL);
+	gpio_request(GPIO_FN_VIO_D15, NULL);
+	gpio_request(GPIO_FN_VIO_D14, NULL);
+	gpio_request(GPIO_FN_VIO_D13, NULL);
+	gpio_request(GPIO_FN_VIO_D12, NULL);
+	gpio_request(GPIO_FN_VIO_D11, NULL);
+	gpio_request(GPIO_FN_VIO_D10, NULL);
+	gpio_request(GPIO_FN_VIO_D9, NULL);
+	gpio_request(GPIO_FN_VIO_D8, NULL);
+
+	gpio_request(GPIO_PTT3, NULL); /* VIO_RST */
+	gpio_direction_output(GPIO_PTT3, 0);
+	gpio_request(GPIO_PTT2, NULL); /* TV_IN_EN */
+	gpio_direction_output(GPIO_PTT2, 1);
+	gpio_request(GPIO_PTT0, NULL); /* CAM_EN */
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+	gpio_direction_output(GPIO_PTT0, 0);
+#else
+	gpio_direction_output(GPIO_PTT0, 1);
+#endif
+	__raw_writew(__raw_readw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
+
+	platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);
+
+	/* SIU: Port B */
+	gpio_request(GPIO_FN_SIUBOLR, NULL);
+	gpio_request(GPIO_FN_SIUBOBT, NULL);
+	gpio_request(GPIO_FN_SIUBISLD, NULL);
+	gpio_request(GPIO_FN_SIUBOSLD, NULL);
+	gpio_request(GPIO_FN_SIUMCKB, NULL);
+
+	/*
+	 * The original driver sets SIUB OLR/OBT, ILR/IBT, and SIUA OLR/OBT to
+	 * output. Need only SIUB, set to output for master mode (table 34.2)
+	 */
+	__raw_writew(__raw_readw(PORT_MSELCRA) | 1, PORT_MSELCRA);
+
+	i2c_register_board_info(0, migor_i2c_devices,
+				ARRAY_SIZE(migor_i2c_devices));
+
+	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
+}
+arch_initcall(migor_devices_setup);
+
+/* Return the board specific boot mode pin configuration */
+static int migor_mode_pins(void)
+{
+	/* MD0=1, MD1=1, MD2=0: Clock Mode 3
+	 * MD3=0: 16-bit Area0 Bus Width
+	 * MD5=1: Little Endian
+	 * TSTMD=1, MD8=0: Test Mode Disabled
+	 */
+	return MODE_PIN0 | MODE_PIN1 | MODE_PIN5;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_migor __initmv = {
+	.mv_name		= "Migo-R",
+	.mv_mode_pins		= migor_mode_pins,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-r2d/Kconfig b/src/kernel/linux/v4.14/arch/sh/boards/mach-r2d/Kconfig
new file mode 100644
index 0000000..21770e6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-r2d/Kconfig
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0
+if SH_RTS7751R2D
+
+menu "RTS7751R2D Board Revision"
+
+config RTS7751R2D_PLUS
+	bool "R2D-PLUS"
+	help
+	  Selecting this option will configure the kernel for R2D-PLUS.
+
+	  R2D-PLUS is the smaller of the two R2D board versions, equipped
+	  with a single PCI slot.
+
+config RTS7751R2D_1
+	bool "R2D-1"
+	help
+	  Selecting this option will configure the kernel for R2D-1.
+
+	  R2D-1 is the larger of the two R2D board versions, equipped
+	  with two PCI slots.
+endmenu
+
+endif
+
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-r2d/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-r2d/Makefile
new file mode 100644
index 0000000..0d4c75a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-r2d/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the RTS7751R2D specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-r2d/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-r2d/irq.c
new file mode 100644
index 0000000..e34f81e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-r2d/irq.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/renesas/rts7751r2d/irq.c
+ *
+ * Copyright (C) 2007  Magnus Damm
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Renesas Technology Sales RTS7751R2D Support, R2D-PLUS and R2D-1.
+ *
+ * Modified for RTS7751R2D by
+ * Atom Create Engineering Co., Ltd. 2002.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach/r2d.h>
+
+#define R2D_NR_IRL 13
+
+enum {
+	UNUSED = 0,
+
+	/* board specific interrupt sources (R2D-1 and R2D-PLUS) */
+	EXT,              /* EXT_INT0-3 */
+	RTC_T, RTC_A,     /* Real Time Clock */
+	AX88796,          /* Ethernet controller (R2D-1 board) */
+	KEY,              /* Key input (R2D-PLUS board) */
+	SDCARD,           /* SD Card */
+	CF_CD, CF_IDE,    /* CF Card Detect + CF IDE */
+	SM501,            /* SM501 aka Voyager */
+	PCI_INTD_RTL8139, /* Ethernet controller */
+	PCI_INTC_PCI1520, /* Cardbus/PCMCIA bridge */
+	PCI_INTB_RTL8139, /* Ethernet controller with HUB (R2D-PLUS board) */
+	PCI_INTB_SLOT,    /* PCI Slot 3.3v (R2D-1 board) */
+	PCI_INTA_SLOT,    /* PCI Slot 3.3v */
+	TP,               /* Touch Panel */
+};
+
+#ifdef CONFIG_RTS7751R2D_1
+
+/* Vectors for R2D-1 */
+static struct intc_vect vectors_r2d_1[] __initdata = {
+	INTC_IRQ(EXT, IRQ_EXT),
+	INTC_IRQ(RTC_T, IRQ_RTC_T), INTC_IRQ(RTC_A, IRQ_RTC_A),
+	INTC_IRQ(AX88796, IRQ_AX88796), INTC_IRQ(SDCARD, IRQ_SDCARD),
+	INTC_IRQ(CF_CD, IRQ_CF_CD), INTC_IRQ(CF_IDE, IRQ_CF_IDE), /* ng */
+	INTC_IRQ(SM501, IRQ_VOYAGER),
+	INTC_IRQ(PCI_INTD_RTL8139, IRQ_PCI_INTD),
+	INTC_IRQ(PCI_INTC_PCI1520, IRQ_PCI_INTC),
+	INTC_IRQ(PCI_INTB_SLOT, IRQ_PCI_INTB),
+	INTC_IRQ(PCI_INTA_SLOT, IRQ_PCI_INTA),
+	INTC_IRQ(TP, IRQ_TP),
+};
+
+/* IRLMSK mask register layout for R2D-1 */
+static struct intc_mask_reg mask_registers_r2d_1[] __initdata = {
+	{ 0xa4000000, 0, 16, /* IRLMSK */
+	  { TP, PCI_INTA_SLOT, PCI_INTB_SLOT,
+	    PCI_INTC_PCI1520, PCI_INTD_RTL8139,
+	    SM501, CF_IDE, CF_CD, SDCARD, AX88796,
+	    RTC_A, RTC_T, 0, 0, 0, EXT } },
+};
+
+/* IRLn to IRQ table for R2D-1 */
+static unsigned char irl2irq_r2d_1[R2D_NR_IRL] __initdata = {
+	IRQ_PCI_INTD, IRQ_CF_IDE, IRQ_CF_CD, IRQ_PCI_INTC,
+	IRQ_VOYAGER, IRQ_AX88796, IRQ_RTC_A, IRQ_RTC_T,
+	IRQ_SDCARD, IRQ_PCI_INTA, IRQ_PCI_INTB, IRQ_EXT,
+	IRQ_TP,
+};
+
+static DECLARE_INTC_DESC(intc_desc_r2d_1, "r2d-1", vectors_r2d_1,
+			 NULL, mask_registers_r2d_1, NULL, NULL);
+
+#endif /* CONFIG_RTS7751R2D_1 */
+
+#ifdef CONFIG_RTS7751R2D_PLUS
+
+/* Vectors for R2D-PLUS */
+static struct intc_vect vectors_r2d_plus[] __initdata = {
+	INTC_IRQ(EXT, IRQ_EXT),
+	INTC_IRQ(RTC_T, IRQ_RTC_T), INTC_IRQ(RTC_A, IRQ_RTC_A),
+	INTC_IRQ(KEY, IRQ_KEY), INTC_IRQ(SDCARD, IRQ_SDCARD),
+	INTC_IRQ(CF_CD, IRQ_CF_CD), INTC_IRQ(CF_IDE, IRQ_CF_IDE),
+	INTC_IRQ(SM501, IRQ_VOYAGER),
+	INTC_IRQ(PCI_INTD_RTL8139, IRQ_PCI_INTD),
+	INTC_IRQ(PCI_INTC_PCI1520, IRQ_PCI_INTC),
+	INTC_IRQ(PCI_INTB_RTL8139, IRQ_PCI_INTB),
+	INTC_IRQ(PCI_INTA_SLOT, IRQ_PCI_INTA),
+	INTC_IRQ(TP, IRQ_TP),
+};
+
+/* IRLMSK mask register layout for R2D-PLUS */
+static struct intc_mask_reg mask_registers_r2d_plus[] __initdata = {
+	{ 0xa4000000, 0, 16, /* IRLMSK */
+	  { TP, PCI_INTA_SLOT, PCI_INTB_RTL8139,
+	    PCI_INTC_PCI1520, PCI_INTD_RTL8139,
+	    SM501, CF_IDE, CF_CD, SDCARD, KEY,
+	    RTC_A, RTC_T, 0, 0, 0, EXT } },
+};
+
+/* IRLn to IRQ table for R2D-PLUS */
+static unsigned char irl2irq_r2d_plus[R2D_NR_IRL] __initdata = {
+	IRQ_PCI_INTD, IRQ_CF_IDE, IRQ_CF_CD, IRQ_PCI_INTC,
+	IRQ_VOYAGER, IRQ_KEY, IRQ_RTC_A, IRQ_RTC_T,
+	IRQ_SDCARD, IRQ_PCI_INTA, IRQ_PCI_INTB, IRQ_EXT,
+	IRQ_TP,
+};
+
+static DECLARE_INTC_DESC(intc_desc_r2d_plus, "r2d-plus", vectors_r2d_plus,
+			 NULL, mask_registers_r2d_plus, NULL, NULL);
+
+#endif /* CONFIG_RTS7751R2D_PLUS */
+
+static unsigned char irl2irq[R2D_NR_IRL];
+
+int rts7751r2d_irq_demux(int irq)
+{
+	if (irq >= R2D_NR_IRL || irq < 0 || !irl2irq[irq])
+		return irq;
+
+	return irl2irq[irq];
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_rts7751r2d_IRQ(void)
+{
+	struct intc_desc *d;
+
+	switch (__raw_readw(PA_VERREG) & 0xf0) {
+#ifdef CONFIG_RTS7751R2D_PLUS
+	case 0x10:
+		printk(KERN_INFO "Using R2D-PLUS interrupt controller.\n");
+		d = &intc_desc_r2d_plus;
+		memcpy(irl2irq, irl2irq_r2d_plus, R2D_NR_IRL);
+		break;
+#endif
+#ifdef CONFIG_RTS7751R2D_1
+	case 0x00: /* according to manual */
+	case 0x30: /* in reality */
+		printk(KERN_INFO "Using R2D-1 interrupt controller.\n");
+		d = &intc_desc_r2d_1;
+		memcpy(irl2irq, irl2irq_r2d_1, R2D_NR_IRL);
+		break;
+#endif
+	default:
+		printk(KERN_INFO "Unknown R2D interrupt controller 0x%04x\n",
+		       __raw_readw(PA_VERREG));
+		return;
+	}
+
+	register_intc_controller(d);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-r2d/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-r2d/setup.c
new file mode 100644
index 0000000..4b98a52
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-r2d/setup.c
@@ -0,0 +1,308 @@
+/*
+ * Renesas Technology Sales RTS7751R2D Support.
+ *
+ * Copyright (C) 2002 - 2006 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2004 - 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/ata_platform.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+#include <linux/pm.h>
+#include <linux/fb.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <asm/machvec.h>
+#include <mach/r2d.h>
+#include <asm/io.h>
+#include <asm/io_trapped.h>
+#include <asm/spi.h>
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start	= PA_AREA5_IO + 0x1000,
+		.end	= PA_AREA5_IO + 0x1000 + 0x10 - 0x2,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PA_AREA5_IO + 0x80c,
+		.end	= PA_AREA5_IO + 0x80c,
+		.flags	= IORESOURCE_MEM,
+	},
+#ifndef CONFIG_RTS7751R2D_1 /* For R2D-1 polling is preferred */
+	[2] = {
+		.start	= IRQ_CF_IDE,
+		.flags	= IORESOURCE_IRQ,
+	},
+#endif
+};
+
+static struct pata_platform_info pata_info = {
+	.ioport_shift	= 1,
+};
+
+static struct platform_device cf_ide_device  = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+	.dev	= {
+		.platform_data	= &pata_info,
+	},
+};
+
+static struct spi_board_info spi_bus[] = {
+	{
+		.modalias	= "rtc-r9701",
+		.max_speed_hz	= 1000000,
+		.mode		= SPI_MODE_3,
+	},
+};
+
+static void r2d_chip_select(struct sh_spi_info *spi, int cs, int state)
+{
+	BUG_ON(cs != 0);  /* Single Epson RTC-9701JE attached on CS0 */
+	__raw_writew(state == BITBANG_CS_ACTIVE, PA_RTCCE);
+}
+
+static struct sh_spi_info spi_info = {
+	.num_chipselect = 1,
+	.chip_select = r2d_chip_select,
+};
+
+static struct resource spi_sh_sci_resources[] = {
+	{
+		.start	= 0xffe00000,
+		.end	= 0xffe0001f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device spi_sh_sci_device  = {
+	.name		= "spi_sh_sci",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(spi_sh_sci_resources),
+	.resource	= spi_sh_sci_resources,
+	.dev	= {
+		.platform_data	= &spi_info,
+	},
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_OUTPORT,
+		.end	= PA_OUTPORT,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct resource sm501_resources[] = {
+	[0]	= {
+		.start	= 0x10000000,
+		.end	= 0x13e00000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= 0x13e00000,
+		.end	= 0x13ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2]	= {
+		.start	= IRQ_VOYAGER,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct fb_videomode sm501_default_mode = {
+	.pixclock	= 35714,
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 105,
+	.right_margin	= 50,
+	.upper_margin	= 35,
+	.lower_margin	= 0,
+	.hsync_len	= 96,
+	.vsync_len	= 2,
+	.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
+	.flags		= (SM501FB_FLAG_USE_INIT_MODE |
+			   SM501FB_FLAG_USE_HWCURSOR |
+			   SM501FB_FLAG_USE_HWACCEL |
+			   SM501FB_FLAG_DISABLE_AT_EXIT),
+
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+	.fb_route	= SM501_FB_OWN,
+	.fb_crt		= &sm501_pdata_fbsub_crt,
+	.fb_pnl		= &sm501_pdata_fbsub_pnl,
+	.flags		= SM501_FBPD_SWAP_FB_ENDIAN,
+};
+
+static struct sm501_initdata sm501_initdata = {
+	.devices	= SM501_USE_USB_HOST | SM501_USE_UART0,
+};
+
+static struct sm501_platdata sm501_platform_data = {
+	.init		= &sm501_initdata,
+	.fb		= &sm501_fb_pdata,
+};
+
+static struct platform_device sm501_device = {
+	.name		= "sm501",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &sm501_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(sm501_resources),
+	.resource	= sm501_resources,
+};
+
+static struct mtd_partition r2d_partitions[] = {
+	{
+		.name		= "U-Boot",
+		.offset		= 0x00000000,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Environment",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x001c0000,
+	}, {
+		.name		= "Flash_FS",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(r2d_partitions),
+	.parts		= r2d_partitions,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x00000000,
+	.end		= 0x02000000,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+static struct platform_device *rts7751r2d_devices[] __initdata = {
+	&sm501_device,
+	&heartbeat_device,
+	&spi_sh_sci_device,
+};
+
+/*
+ * The CF is connected with a 16-bit bus where 8-bit operations are
+ * unsupported. The linux ata driver is however using 8-bit operations, so
+ * insert a trapped io filter to convert 8-bit operations into 16-bit.
+ */
+static struct trapped_io cf_trapped_io = {
+	.resource		= cf_ide_resources,
+	.num_resources		= 2,
+	.minimum_bus_width	= 16,
+};
+
+static int __init rts7751r2d_devices_setup(void)
+{
+	if (register_trapped_io(&cf_trapped_io) == 0)
+		platform_device_register(&cf_ide_device);
+
+	if (mach_is_r2d_plus())
+		platform_device_register(&flash_device);
+
+	spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
+
+	return platform_add_devices(rts7751r2d_devices,
+				    ARRAY_SIZE(rts7751r2d_devices));
+}
+device_initcall(rts7751r2d_devices_setup);
+
+static void rts7751r2d_power_off(void)
+{
+	__raw_writew(0x0001, PA_POWOFF);
+}
+
+/*
+ * Initialize the board
+ */
+static void __init rts7751r2d_setup(char **cmdline_p)
+{
+	void __iomem *sm501_reg;
+	u16 ver = __raw_readw(PA_VERREG);
+
+	printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
+
+	printk(KERN_INFO "FPGA version:%d (revision:%d)\n",
+					(ver >> 4) & 0xf, ver & 0xf);
+
+	__raw_writew(0x0000, PA_OUTPORT);
+	pm_power_off = rts7751r2d_power_off;
+
+	/* sm501 dram configuration:
+	 * ColSizeX = 11 - External Memory Column Size: 256 words.
+	 * APX = 1 - External Memory Active to Pre-Charge Delay: 7 clocks.
+	 * RstX = 1 - External Memory Reset: Normal.
+	 * Rfsh = 1 - Local Memory Refresh to Command Delay: 12 clocks.
+	 * BwC =  1 - Local Memory Block Write Cycle Time: 2 clocks.
+	 * BwP =  1 - Local Memory Block Write to Pre-Charge Delay: 1 clock.
+	 * AP = 1 - Internal Memory Active to Pre-Charge Delay: 7 clocks.
+	 * Rst = 1 - Internal Memory Reset: Normal.
+	 * RA = 1 - Internal Memory Remain in Active State: Do not remain.
+	 */
+
+	sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
+	writel(readl(sm501_reg) | 0x00f107c0, sm501_reg);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rts7751r2d __initmv = {
+	.mv_name		= "RTS7751R2D",
+	.mv_setup		= rts7751r2d_setup,
+	.mv_init_irq		= init_rts7751r2d_IRQ,
+	.mv_irq_demux		= rts7751r2d_irq_demux,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/Kconfig b/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/Kconfig
new file mode 100644
index 0000000..f0299bc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/Kconfig
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0
+if SH_RSK
+
+choice
+	prompt "RSK+ options"
+	default SH_RSK7203
+
+config SH_RSK7201
+	bool "RSK7201"
+	depends on CPU_SUBTYPE_SH7201
+
+config SH_RSK7203
+	bool "RSK7203"
+	select GPIOLIB
+	depends on CPU_SUBTYPE_SH7203
+
+config SH_RSK7264
+	bool "RSK2+SH7264"
+	select GPIOLIB
+	depends on CPU_SUBTYPE_SH7264
+
+config SH_RSK7269
+	bool "RSK2+SH7269"
+	select GPIOLIB
+	depends on CPU_SUBTYPE_SH7269
+
+endchoice
+
+endif
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/Makefile
new file mode 100644
index 0000000..6a4e1b5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/Makefile
@@ -0,0 +1,4 @@
+obj-y				:= setup.o
+obj-$(CONFIG_SH_RSK7203)	+= devices-rsk7203.o
+obj-$(CONFIG_SH_RSK7264)	+= devices-rsk7264.o
+obj-$(CONFIG_SH_RSK7269)	+= devices-rsk7269.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/devices-rsk7203.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/devices-rsk7203.c
new file mode 100644
index 0000000..a8089f7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -0,0 +1,140 @@
+/*
+ * Renesas Technology Europe RSK+ 7203 Support.
+ *
+ * Copyright (C) 2008 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <cpu/sh7203.h>
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SWAP_FIFO,
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= 0x24000000,
+		.end		= 0x240000ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 64,
+		.end		= 64,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct gpio_led rsk7203_gpio_leds[] = {
+	{
+		.name			= "green",
+		.gpio			= GPIO_PE10,
+		.active_low		= 1,
+	}, {
+		.name			= "orange",
+		.default_trigger	= "nand-disk",
+		.gpio			= GPIO_PE12,
+		.active_low		= 1,
+	}, {
+		.name			= "red:timer",
+		.default_trigger	= "timer",
+		.gpio			= GPIO_PC14,
+		.active_low		= 1,
+	}, {
+		.name			= "red:heartbeat",
+		.default_trigger	= "heartbeat",
+		.gpio			= GPIO_PE11,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data rsk7203_gpio_leds_info = {
+	.leds		= rsk7203_gpio_leds,
+	.num_leds	= ARRAY_SIZE(rsk7203_gpio_leds),
+};
+
+static struct platform_device led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &rsk7203_gpio_leds_info,
+	},
+};
+
+static struct gpio_keys_button rsk7203_gpio_keys_table[] = {
+	{
+		.code		= BTN_0,
+		.gpio		= GPIO_PB0,
+		.active_low	= 1,
+		.desc		= "SW1",
+	}, {
+		.code		= BTN_1,
+		.gpio		= GPIO_PB1,
+		.active_low	= 1,
+		.desc		= "SW2",
+	}, {
+		.code		= BTN_2,
+		.gpio		= GPIO_PB2,
+		.active_low	= 1,
+		.desc		= "SW3",
+	},
+};
+
+static struct gpio_keys_platform_data rsk7203_gpio_keys_info = {
+	.buttons	= rsk7203_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(rsk7203_gpio_keys_table),
+	.poll_interval	= 50, /* default to 50ms */
+};
+
+static struct platform_device keys_device = {
+	.name		= "gpio-keys-polled",
+	.dev		= {
+		.platform_data	= &rsk7203_gpio_keys_info,
+	},
+};
+
+static struct platform_device *rsk7203_devices[] __initdata = {
+	&smsc911x_device,
+	&led_device,
+	&keys_device,
+};
+
+static int __init rsk7203_devices_setup(void)
+{
+	/* Select pins for SCIF0 */
+	gpio_request(GPIO_FN_TXD0, NULL);
+	gpio_request(GPIO_FN_RXD0, NULL);
+
+	/* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */
+	__raw_writel(0x36db0400, 0xfffc0008); /* CS1BCR */
+	gpio_request(GPIO_FN_IRQ0_PB, NULL);
+
+	return platform_add_devices(rsk7203_devices,
+				    ARRAY_SIZE(rsk7203_devices));
+}
+device_initcall(rsk7203_devices_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/devices-rsk7264.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/devices-rsk7264.c
new file mode 100644
index 0000000..7251e37
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/devices-rsk7264.c
@@ -0,0 +1,58 @@
+/*
+ * RSK+SH7264 Support.
+ *
+ * Copyright (C) 2012 Renesas Electronics Europe
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/smsc911x.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO,
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= 0x28000000,
+		.end		= 0x280000ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 65,
+		.end		= 65,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct platform_device *rsk7264_devices[] __initdata = {
+	&smsc911x_device,
+};
+
+static int __init rsk7264_devices_setup(void)
+{
+	return platform_add_devices(rsk7264_devices,
+				    ARRAY_SIZE(rsk7264_devices));
+}
+device_initcall(rsk7264_devices_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/devices-rsk7269.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/devices-rsk7269.c
new file mode 100644
index 0000000..4a54459
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/devices-rsk7269.c
@@ -0,0 +1,60 @@
+/*
+ * RSK+SH7269 Support
+ *
+ * Copyright (C) 2012  Renesas Electronics Europe Ltd
+ * Copyright (C) 2012  Phil Edworthy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO,
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= 0x24000000,
+		.end		= 0x240000ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 85,
+		.end		= 85,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct platform_device *rsk7269_devices[] __initdata = {
+	&smsc911x_device,
+};
+
+static int __init rsk7269_devices_setup(void)
+{
+	return platform_add_devices(rsk7269_devices,
+				    ARRAY_SIZE(rsk7269_devices));
+}
+device_initcall(rsk7269_devices_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/setup.c
new file mode 100644
index 0000000..6bc134b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-rsk/setup.c
@@ -0,0 +1,87 @@
+/*
+ * Renesas Technology Europe RSK+ Support.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ * Copyright (C) 2008 Peter Griffin <pgriffin@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+static struct mtd_partition rsk_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0x00000000,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x001c0000,
+	}, {
+		.name		= "Flash_FS",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.parts			= rsk_partitions,
+	.nr_parts		= ARRAY_SIZE(rsk_partitions),
+	.width			= 2,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x20000000,
+	.end		= 0x20400000,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+static struct platform_device *rsk_devices[] __initdata = {
+	&flash_device,
+};
+
+static int __init rsk_devices_setup(void)
+{
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	return platform_add_devices(rsk_devices,
+				    ARRAY_SIZE(rsk_devices));
+}
+device_initcall(rsk_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rsk __initmv = {
+	.mv_name        = "RSK+",
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7780/Kconfig b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7780/Kconfig
new file mode 100644
index 0000000..d4392ef
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7780/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+if SH_SDK7780
+
+choice
+	prompt "SDK7780 options"
+	default SH_SDK7780_BASE
+
+config SH_SDK7780_BASE
+	bool "SDK7780 with base-board support"
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  Selecting this option will enable support for the expansion
+	  baseboard devices. If in doubt, say Y.
+
+endchoice
+
+endif
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7780/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7780/Makefile
new file mode 100644
index 0000000..3d8f0be
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7780/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the SDK7780 specific parts of the kernel
+#
+obj-y	 := setup.o irq.o
+
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7780/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7780/irq.c
new file mode 100644
index 0000000..e5f7564
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7780/irq.c
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/sh/boards/renesas/sdk7780/irq.c
+ *
+ * Renesas Technology Europe SDK7780 Support.
+ *
+ * Copyright (C) 2008  Nicholas Beck <nbeck@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/sdk7780.h>
+
+enum {
+	UNUSED = 0,
+	/* board specific interrupt sources */
+	SMC91C111,	/* Ethernet controller */
+};
+
+static struct intc_vect fpga_vectors[] __initdata = {
+	INTC_IRQ(SMC91C111, IRQ_ETHERNET),
+};
+
+static struct intc_mask_reg fpga_mask_registers[] __initdata = {
+	{ 0, FPGA_IRQ0MR, 16,
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, 0, 0, SMC91C111, 0, 0, 0, 0 } },
+};
+
+static DECLARE_INTC_DESC(fpga_intc_desc, "sdk7780-irq", fpga_vectors,
+			 NULL, fpga_mask_registers, NULL, NULL);
+
+void __init init_sdk7780_IRQ(void)
+{
+	printk(KERN_INFO "Using SDK7780 interrupt controller.\n");
+
+	__raw_writew(0xFFFF, FPGA_IRQ0MR);
+	/* Setup IRL 0-3 */
+	__raw_writew(0x0003, FPGA_IMSR);
+	plat_irq_setup_pins(IRQ_MODE_IRL3210);
+
+	register_intc_controller(&fpga_intc_desc);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7780/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7780/setup.c
new file mode 100644
index 0000000..2241659
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7780/setup.c
@@ -0,0 +1,99 @@
+/*
+ * arch/sh/boards/renesas/sdk7780/setup.c
+ *
+ * Renesas Solutions SH7780 SDK Support
+ * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <asm/machvec.h>
+#include <mach/sdk7780.h>
+#include <asm/heartbeat.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+
+#define GPIO_PECR        0xFFEA0008
+
+/* Heartbeat */
+static struct resource heartbeat_resource = {
+	.start  = PA_LED,
+	.end    = PA_LED,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
+};
+
+/* SMC91x */
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_ETHERNET,
+		.end    = IRQ_ETHERNET,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct platform_device *sdk7780_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+};
+
+static int __init sdk7780_devices_setup(void)
+{
+	return platform_add_devices(sdk7780_devices,
+		ARRAY_SIZE(sdk7780_devices));
+}
+device_initcall(sdk7780_devices_setup);
+
+static void __init sdk7780_setup(char **cmdline_p)
+{
+	u16 ver = __raw_readw(FPGA_FPVERR);
+	u16 dateStamp = __raw_readw(FPGA_FPDATER);
+
+	printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n");
+	printk(KERN_INFO "Board version: %d (revision %d), "
+			 "FPGA version: %d (revision %d), datestamp : %d\n",
+			 (ver >> 12) & 0xf, (ver >> 8) & 0xf,
+			 (ver >>  4) & 0xf, ver & 0xf,
+			 dateStamp);
+
+	/* Setup pin mux'ing for PCIC */
+	__raw_writew(0x0000, GPIO_PECR);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7780 __initmv = {
+	.mv_name        = "Renesas SDK7780-R3" ,
+	.mv_setup		= sdk7780_setup,
+	.mv_init_irq	= init_sdk7780_IRQ,
+};
+
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/Makefile
new file mode 100644
index 0000000..45d32e3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/Makefile
@@ -0,0 +1,4 @@
+obj-y	:= fpga.o irq.o nmi.o setup.o
+
+obj-$(CONFIG_GPIOLIB)		+= gpio.o
+obj-$(CONFIG_HAVE_SRAM_POOL)	+= sram.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/fpga.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/fpga.c
new file mode 100644
index 0000000..3e4ec66
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/fpga.c
@@ -0,0 +1,72 @@
+/*
+ * SDK7786 FPGA Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/bcd.h>
+#include <mach/fpga.h>
+#include <asm/sizes.h>
+
+#define FPGA_REGS_OFFSET	0x03fff800
+#define FPGA_REGS_SIZE		0x490
+
+/*
+ * The FPGA can be mapped in any of the generally available areas,
+ * so we attempt to scan for it using the fixed SRSTR read magic.
+ *
+ * Once the FPGA is located, the rest of the mapping data for the other
+ * components can be determined dynamically from its section mapping
+ * registers.
+ */
+static void __iomem *sdk7786_fpga_probe(void)
+{
+	unsigned long area;
+	void __iomem *base;
+
+	/*
+	 * Iterate over all of the areas where the FPGA could be mapped.
+	 * The possible range is anywhere from area 0 through 6, area 7
+	 * is reserved.
+	 */
+	for (area = PA_AREA0; area < PA_AREA7; area += SZ_64M) {
+		base = ioremap_nocache(area + FPGA_REGS_OFFSET, FPGA_REGS_SIZE);
+		if (!base) {
+			/* Failed to remap this area, move along. */
+			continue;
+		}
+
+		if (ioread16(base + SRSTR) == SRSTR_MAGIC)
+			return base;	/* Found it! */
+
+		iounmap(base);
+	}
+
+	return NULL;
+}
+
+void __iomem *sdk7786_fpga_base;
+
+void __init sdk7786_fpga_init(void)
+{
+	u16 version, date;
+
+	sdk7786_fpga_base = sdk7786_fpga_probe();
+	if (unlikely(!sdk7786_fpga_base)) {
+		panic("FPGA detection failed.\n");
+		return;
+	}
+
+	version = fpga_read_reg(FPGAVR);
+	date = fpga_read_reg(FPGADR);
+
+	pr_info("\tFPGA version:\t%d.%d (built on %d/%d/%d)\n",
+		bcd2bin(version >> 8) & 0xf, bcd2bin(version & 0xf),
+		((date >> 12) & 0xf) + 2000,
+		(date >> 8) & 0xf, bcd2bin(date & 0xff));
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/gpio.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/gpio.c
new file mode 100644
index 0000000..4799701
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/gpio.c
@@ -0,0 +1,49 @@
+/*
+ * SDK7786 FPGA USRGPIR Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/gpio/driver.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <mach/fpga.h>
+
+#define NR_FPGA_GPIOS	8
+
+static const char *usrgpir_gpio_names[NR_FPGA_GPIOS] = {
+	"in0", "in1", "in2", "in3", "in4", "in5", "in6", "in7",
+};
+
+static int usrgpir_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	/* always in */
+	return 0;
+}
+
+static int usrgpir_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+	return !!(fpga_read_reg(USRGPIR) & (1 << gpio));
+}
+
+static struct gpio_chip usrgpir_gpio_chip = {
+	.label			= "sdk7786-fpga",
+	.names			= usrgpir_gpio_names,
+	.direction_input	= usrgpir_gpio_direction_input,
+	.get			= usrgpir_gpio_get,
+	.base			= -1, /* don't care */
+	.ngpio			= NR_FPGA_GPIOS,
+};
+
+static int __init usrgpir_gpio_setup(void)
+{
+	return gpiochip_add_data(&usrgpir_gpio_chip, NULL);
+}
+device_initcall(usrgpir_gpio_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/irq.c
new file mode 100644
index 0000000..46943a0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/irq.c
@@ -0,0 +1,48 @@
+/*
+ * SDK7786 FPGA IRQ Controller Support.
+ *
+ * Copyright (C) 2010  Matt Fleming
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/irq.h>
+#include <mach/fpga.h>
+#include <mach/irq.h>
+
+enum {
+	ATA_IRQ_BIT		= 1,
+	SPI_BUSY_BIT		= 2,
+	LIRQ5_BIT		= 3,
+	LIRQ6_BIT		= 4,
+	LIRQ7_BIT		= 5,
+	LIRQ8_BIT		= 6,
+	KEY_IRQ_BIT		= 7,
+	PEN_IRQ_BIT		= 8,
+	ETH_IRQ_BIT		= 9,
+	RTC_ALARM_BIT		= 10,
+	CRYSTAL_FAIL_BIT	= 12,
+	ETH_PME_BIT		= 14,
+};
+
+void __init sdk7786_init_irq(void)
+{
+	unsigned int tmp;
+
+	/* Enable priority encoding for all IRLs */
+	fpga_write_reg(fpga_read_reg(INTMSR) | 0x0303, INTMSR);
+
+	/* Clear FPGA interrupt status registers */
+	fpga_write_reg(0x0000, INTASR);
+	fpga_write_reg(0x0000, INTBSR);
+
+	/* Unmask FPGA interrupts */
+	tmp = fpga_read_reg(INTAMR);
+	tmp &= ~(1 << ETH_IRQ_BIT);
+	fpga_write_reg(tmp, INTAMR);
+
+	plat_irq_setup_pins(IRQ_MODE_IRL7654_MASK);
+	plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/nmi.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/nmi.c
new file mode 100644
index 0000000..edcfa1f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/nmi.c
@@ -0,0 +1,83 @@
+/*
+ * SDK7786 FPGA NMI Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <mach/fpga.h>
+
+enum {
+	NMI_MODE_MANUAL,
+	NMI_MODE_AUX,
+	NMI_MODE_MASKED,
+	NMI_MODE_ANY,
+	NMI_MODE_UNKNOWN,
+};
+
+/*
+ * Default to the manual NMI switch.
+ */
+static unsigned int __initdata nmi_mode = NMI_MODE_ANY;
+
+static int __init nmi_mode_setup(char *str)
+{
+	if (!str)
+		return 0;
+
+	if (strcmp(str, "manual") == 0)
+		nmi_mode = NMI_MODE_MANUAL;
+	else if (strcmp(str, "aux") == 0)
+		nmi_mode = NMI_MODE_AUX;
+	else if (strcmp(str, "masked") == 0)
+		nmi_mode = NMI_MODE_MASKED;
+	else if (strcmp(str, "any") == 0)
+		nmi_mode = NMI_MODE_ANY;
+	else {
+		nmi_mode = NMI_MODE_UNKNOWN;
+		pr_warning("Unknown NMI mode %s\n", str);
+	}
+
+	printk("Set NMI mode to %d\n", nmi_mode);
+	return 0;
+}
+early_param("nmi_mode", nmi_mode_setup);
+
+void __init sdk7786_nmi_init(void)
+{
+	unsigned int source, mask, tmp;
+
+	switch (nmi_mode) {
+	case NMI_MODE_MANUAL:
+		source = NMISR_MAN_NMI;
+		mask = NMIMR_MAN_NMIM;
+		break;
+	case NMI_MODE_AUX:
+		source = NMISR_AUX_NMI;
+		mask = NMIMR_AUX_NMIM;
+		break;
+	case NMI_MODE_ANY:
+		source = NMISR_MAN_NMI | NMISR_AUX_NMI;
+		mask = NMIMR_MAN_NMIM | NMIMR_AUX_NMIM;
+		break;
+	case NMI_MODE_MASKED:
+	case NMI_MODE_UNKNOWN:
+	default:
+		source = mask = 0;
+		break;
+	}
+
+	/* Set the NMI source */
+	tmp = fpga_read_reg(NMISR);
+	tmp &= ~NMISR_MASK;
+	tmp |= source;
+	fpga_write_reg(tmp, NMISR);
+
+	/* And the IRQ masking */
+	fpga_write_reg(NMIMR_MASK ^ mask, NMIMR);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/setup.c
new file mode 100644
index 0000000..c29268b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/setup.c
@@ -0,0 +1,269 @@
+/*
+ * Renesas Technology Europe SDK7786 Support.
+ *
+ * Copyright (C) 2010  Matt Fleming
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <mach/fpga.h>
+#include <mach/irq.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+#include <asm/sizes.h>
+#include <asm/clock.h>
+#include <asm/reboot.h>
+#include <asm/smp-ops.h>
+
+static struct resource heartbeat_resource = {
+	.start		= 0x07fff8b0,
+	.end		= 0x07fff8b0 + sizeof(u16) - 1,
+	.flags		= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.name		= "smsc911x-memory",
+		.start		= 0x07ffff00,
+		.end		= 0x07ffff00 + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name		= "smsc911x-irq",
+		.start		= evt2irq(0x2c0),
+		.end		= evt2irq(0x2c0),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct resource smbus_fpga_resource = {
+	.start		= 0x07fff9e0,
+	.end		= 0x07fff9e0 + SZ_32 - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device smbus_fpga_device = {
+	.name		= "i2c-sdk7786",
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= &smbus_fpga_resource,
+};
+
+static struct resource smbus_pcie_resource = {
+	.start		= 0x07fffc30,
+	.end		= 0x07fffc30 + SZ_32 - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device smbus_pcie_device = {
+	.name		= "i2c-sdk7786",
+	.id		= 1,
+	.num_resources	= 1,
+	.resource	= &smbus_pcie_resource,
+};
+
+static struct i2c_board_info __initdata sdk7786_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("max6900", 0x68),
+	},
+};
+
+static struct platform_device *sh7786_devices[] __initdata = {
+	&heartbeat_device,
+	&smsc911x_device,
+	&smbus_fpga_device,
+	&smbus_pcie_device,
+};
+
+static int sdk7786_i2c_setup(void)
+{
+	unsigned int tmp;
+
+	/*
+	 * Hand over I2C control to the FPGA.
+	 */
+	tmp = fpga_read_reg(SBCR);
+	tmp &= ~SCBR_I2CCEN;
+	tmp |= SCBR_I2CMEN;
+	fpga_write_reg(tmp, SBCR);
+
+	return i2c_register_board_info(0, sdk7786_i2c_devices,
+				       ARRAY_SIZE(sdk7786_i2c_devices));
+}
+
+static int __init sdk7786_devices_setup(void)
+{
+	int ret;
+
+	ret = platform_add_devices(sh7786_devices, ARRAY_SIZE(sh7786_devices));
+	if (unlikely(ret != 0))
+		return ret;
+
+	return sdk7786_i2c_setup();
+}
+device_initcall(sdk7786_devices_setup);
+
+static int sdk7786_mode_pins(void)
+{
+	return fpga_read_reg(MODSWR);
+}
+
+/*
+ * FPGA-driven PCIe clocks
+ *
+ * Historically these include the oscillator, clock B (slots 2/3/4) and
+ * clock A (slot 1 and the CPU clock). Newer revs of the PCB shove
+ * everything under a single PCIe clocks enable bit that happens to map
+ * to the same bit position as the oscillator bit for earlier FPGA
+ * versions.
+ *
+ * Given that the legacy clocks have the side-effect of shutting the CPU
+ * off through the FPGA along with the PCI slots, we simply leave them in
+ * their initial state and don't bother registering them with the clock
+ * framework.
+ */
+static int sdk7786_pcie_clk_enable(struct clk *clk)
+{
+	fpga_write_reg(fpga_read_reg(PCIECR) | PCIECR_CLKEN, PCIECR);
+	return 0;
+}
+
+static void sdk7786_pcie_clk_disable(struct clk *clk)
+{
+	fpga_write_reg(fpga_read_reg(PCIECR) & ~PCIECR_CLKEN, PCIECR);
+}
+
+static struct sh_clk_ops sdk7786_pcie_clk_ops = {
+	.enable		= sdk7786_pcie_clk_enable,
+	.disable	= sdk7786_pcie_clk_disable,
+};
+
+static struct clk sdk7786_pcie_clk = {
+	.ops		= &sdk7786_pcie_clk_ops,
+};
+
+static struct clk_lookup sdk7786_pcie_cl = {
+	.con_id		= "pcie_plat_clk",
+	.clk		= &sdk7786_pcie_clk,
+};
+
+static int sdk7786_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	/*
+	 * Only handle the EXTAL case, anyone interfacing a crystal
+	 * resonator will need to provide their own input clock.
+	 */
+	if (test_mode_pin(MODE_PIN9))
+		return -EINVAL;
+
+	clk = clk_get(NULL, "extal");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333333);
+	clk_put(clk);
+
+	/*
+	 * Setup the FPGA clocks.
+	 */
+	ret = clk_register(&sdk7786_pcie_clk);
+	if (unlikely(ret)) {
+		pr_err("FPGA clock registration failed\n");
+		return ret;
+	}
+
+	clkdev_add(&sdk7786_pcie_cl);
+
+	return 0;
+}
+
+static void sdk7786_restart(char *cmd)
+{
+	fpga_write_reg(0xa5a5, SRSTR);
+}
+
+static void sdk7786_power_off(void)
+{
+	fpga_write_reg(fpga_read_reg(PWRCR) | PWRCR_PDWNREQ, PWRCR);
+
+	/*
+	 * It can take up to 20us for the R8C to do its job, back off and
+	 * wait a bit until we've been shut off. Even though newer FPGA
+	 * versions don't set the ACK bit, the latency issue remains.
+	 */
+	while ((fpga_read_reg(PWRCR) & PWRCR_PDWNACK) == 0)
+		cpu_sleep();
+}
+
+/* Initialize the board */
+static void __init sdk7786_setup(char **cmdline_p)
+{
+	pr_info("Renesas Technology Europe SDK7786 support:\n");
+
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	sdk7786_fpga_init();
+	sdk7786_nmi_init();
+
+	pr_info("\tPCB revision:\t%d\n", fpga_read_reg(PCBRR) & 0xf);
+
+	machine_ops.restart = sdk7786_restart;
+	pm_power_off = sdk7786_power_off;
+
+	register_smp_ops(&shx3_smp_ops);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sdk7786 __initmv = {
+	.mv_name		= "SDK7786",
+	.mv_setup		= sdk7786_setup,
+	.mv_mode_pins		= sdk7786_mode_pins,
+	.mv_clk_init		= sdk7786_clk_init,
+	.mv_init_irq		= sdk7786_init_irq,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/sram.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/sram.c
new file mode 100644
index 0000000..c81c3ab
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sdk7786/sram.c
@@ -0,0 +1,72 @@
+/*
+ * SDK7786 FPGA SRAM Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <mach/fpga.h>
+#include <asm/sram.h>
+#include <asm/sizes.h>
+
+static int __init fpga_sram_init(void)
+{
+	unsigned long phys;
+	unsigned int area;
+	void __iomem *vaddr;
+	int ret;
+	u16 data;
+
+	/* Enable FPGA SRAM */
+	data = fpga_read_reg(LCLASR);
+	data |= LCLASR_FRAMEN;
+	fpga_write_reg(data, LCLASR);
+
+	/*
+	 * FPGA_SEL determines the area mapping
+	 */
+	area = (data & LCLASR_FPGA_SEL_MASK) >> LCLASR_FPGA_SEL_SHIFT;
+	if (unlikely(area == LCLASR_AREA_MASK)) {
+		pr_err("FPGA memory unmapped.\n");
+		return -ENXIO;
+	}
+
+	/*
+	 * The memory itself occupies a 2KiB range at the top of the area
+	 * immediately below the system registers.
+	 */
+	phys = (area << 26) + SZ_64M - SZ_4K;
+
+	/*
+	 * The FPGA SRAM resides in translatable physical space, so set
+	 * up a mapping prior to inserting it in to the pool.
+	 */
+	vaddr = ioremap(phys, SZ_2K);
+	if (unlikely(!vaddr)) {
+		pr_err("Failed remapping FPGA memory.\n");
+		return -ENXIO;
+	}
+
+	pr_info("Adding %dKiB of FPGA memory at 0x%08lx-0x%08lx "
+		"(area %d) to pool.\n",
+		SZ_2K >> 10, phys, phys + SZ_2K - 1, area);
+
+	ret = gen_pool_add(sram_pool, (unsigned long)vaddr, SZ_2K, -1);
+	if (unlikely(ret < 0)) {
+		pr_err("Failed adding memory\n");
+		iounmap(vaddr);
+		return ret;
+	}
+
+	return 0;
+}
+postcore_initcall(fpga_sram_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7206/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7206/Makefile
new file mode 100644
index 0000000..5c9eaa0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7206/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the 7206 SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7206/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7206/irq.c
new file mode 100644
index 0000000..2b15370
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7206/irq.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/7206/irq.c
+ *
+ * Copyright (C) 2005,2006 Yoshinori Sato
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <mach-se/mach/se7206.h>
+
+#define INTSTS0 0x31800000
+#define INTSTS1 0x31800002
+#define INTMSK0 0x31800004
+#define INTMSK1 0x31800006
+#define INTSEL  0x31800008
+
+#define IRQ0_IRQ 64
+#define IRQ1_IRQ 65
+#define IRQ3_IRQ 67
+
+#define INTC_IPR01 0xfffe0818
+#define INTC_ICR1  0xfffe0802
+
+static void disable_se7206_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned short val;
+	unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
+	unsigned short msk0,msk1;
+
+	/* Set the priority in IPR to 0 */
+	val = __raw_readw(INTC_IPR01);
+	val &= mask;
+	__raw_writew(val, INTC_IPR01);
+	/* FPGA mask set */
+	msk0 = __raw_readw(INTMSK0);
+	msk1 = __raw_readw(INTMSK1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		msk0 |= 0x0010;
+		break;
+	case IRQ1_IRQ:
+		msk0 |= 0x000f;
+		break;
+	case IRQ3_IRQ:
+		msk0 |= 0x0f00;
+		msk1 |= 0x00ff;
+		break;
+	}
+	__raw_writew(msk0, INTMSK0);
+	__raw_writew(msk1, INTMSK1);
+}
+
+static void enable_se7206_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned short val;
+	unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
+	unsigned short msk0,msk1;
+
+	/* Set priority in IPR back to original value */
+	val = __raw_readw(INTC_IPR01);
+	val |= value;
+	__raw_writew(val, INTC_IPR01);
+
+	/* FPGA mask reset */
+	msk0 = __raw_readw(INTMSK0);
+	msk1 = __raw_readw(INTMSK1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		msk0 &= ~0x0010;
+		break;
+	case IRQ1_IRQ:
+		msk0 &= ~0x000f;
+		break;
+	case IRQ3_IRQ:
+		msk0 &= ~0x0f00;
+		msk1 &= ~0x00ff;
+		break;
+	}
+	__raw_writew(msk0, INTMSK0);
+	__raw_writew(msk1, INTMSK1);
+}
+
+static void eoi_se7206_irq(struct irq_data *data)
+{
+	unsigned short sts0,sts1;
+	unsigned int irq = data->irq;
+
+	if (!irqd_irq_disabled(data) && !irqd_irq_inprogress(data))
+		enable_se7206_irq(data);
+	/* FPGA isr clear */
+	sts0 = __raw_readw(INTSTS0);
+	sts1 = __raw_readw(INTSTS1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		sts0 &= ~0x0010;
+		break;
+	case IRQ1_IRQ:
+		sts0 &= ~0x000f;
+		break;
+	case IRQ3_IRQ:
+		sts0 &= ~0x0f00;
+		sts1 &= ~0x00ff;
+		break;
+	}
+	__raw_writew(sts0, INTSTS0);
+	__raw_writew(sts1, INTSTS1);
+}
+
+static struct irq_chip se7206_irq_chip __read_mostly = {
+	.name		= "SE7206-FPGA",
+	.irq_mask	= disable_se7206_irq,
+	.irq_unmask	= enable_se7206_irq,
+	.irq_eoi	= eoi_se7206_irq,
+};
+
+static void make_se7206_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_set_chip_and_handler_name(irq, &se7206_irq_chip,
+				      handle_level_irq, "level");
+	disable_se7206_irq(irq_get_irq_data(irq));
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7206_IRQ(void)
+{
+	make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
+	make_se7206_irq(IRQ1_IRQ); /* ATA */
+	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
+
+	__raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */
+
+	/* FPGA System register setup*/
+	__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
+	__raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
+
+	/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
+	__raw_writew(0x0001,INTSEL);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7206/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7206/setup.c
new file mode 100644
index 0000000..dc55d3a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7206/setup.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *
+ * linux/arch/sh/boards/se/7206/setup.c
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ * Copyright (C) 2007 - 2008  Paul Mundt
+ *
+ * Hitachi 7206 SolutionEngine Support.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+#include <mach-se/mach/se7206.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name		= "smc91x-regs",
+		.start		= PA_SMSC + 0x300,
+		.end		= PA_SMSC + 0x300 + 0x020 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 64,
+		.end		= 64,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+static struct platform_device *se7206_devices[] __initdata = {
+	&smc91x_device,
+	&heartbeat_device,
+};
+
+static int __init se7206_devices_setup(void)
+{
+	return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
+}
+device_initcall(se7206_devices_setup);
+
+static int se7206_mode_pins(void)
+{
+	return MODE_PIN1 | MODE_PIN2;
+}
+
+/*
+ * The Machine Vector
+ */
+
+static struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_init_irq		= init_se7206_IRQ,
+	.mv_mode_pins		= se7206_mode_pins,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7343/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7343/Makefile
new file mode 100644
index 0000000..4c3666a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7343/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the 7343 SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7343/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7343/irq.c
new file mode 100644
index 0000000..6129aef
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7343/irq.c
@@ -0,0 +1,126 @@
+/*
+ * Hitachi UL SolutionEngine 7343 FPGA IRQ Support.
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ * Copyright (C) 2012  Paul Mundt
+ *
+ * Based on linux/arch/sh/boards/se/7343/irq.c
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define DRV_NAME "SE7343-FPGA"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <asm/sizes.h>
+#include <mach-se/mach/se7343.h>
+
+#define PA_CPLD_BASE_ADDR	0x11400000
+#define PA_CPLD_ST_REG		0x08	/* CPLD Interrupt status register */
+#define PA_CPLD_IMSK_REG	0x0a	/* CPLD Interrupt mask register */
+
+static void __iomem *se7343_irq_regs;
+struct irq_domain *se7343_irq_domain;
+
+static void se7343_irq_demux(struct irq_desc *desc)
+{
+	struct irq_data *data = irq_desc_get_irq_data(desc);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	unsigned long mask;
+	int bit;
+
+	chip->irq_mask_ack(data);
+
+	mask = ioread16(se7343_irq_regs + PA_CPLD_ST_REG);
+
+	for_each_set_bit(bit, &mask, SE7343_FPGA_IRQ_NR)
+		generic_handle_irq(irq_linear_revmap(se7343_irq_domain, bit));
+
+	chip->irq_unmask(data);
+}
+
+static void __init se7343_domain_init(void)
+{
+	int i;
+
+	se7343_irq_domain = irq_domain_add_linear(NULL, SE7343_FPGA_IRQ_NR,
+						  &irq_domain_simple_ops, NULL);
+	if (unlikely(!se7343_irq_domain)) {
+		printk("Failed to get IRQ domain\n");
+		return;
+	}
+
+	for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
+		int irq = irq_create_mapping(se7343_irq_domain, i);
+
+		if (unlikely(irq == 0)) {
+			printk("Failed to allocate IRQ %d\n", i);
+			return;
+		}
+	}
+}
+
+static void __init se7343_gc_init(void)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	unsigned int irq_base;
+
+	irq_base = irq_linear_revmap(se7343_irq_domain, 0);
+
+	gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7343_irq_regs,
+				    handle_level_irq);
+	if (unlikely(!gc))
+		return;
+
+	ct = gc->chip_types;
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+
+	ct->regs.mask = PA_CPLD_IMSK_REG;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(SE7343_FPGA_IRQ_NR),
+			       IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+
+	irq_set_chained_handler(IRQ0_IRQ, se7343_irq_demux);
+	irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ1_IRQ, se7343_irq_demux);
+	irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ4_IRQ, se7343_irq_demux);
+	irq_set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ5_IRQ, se7343_irq_demux);
+	irq_set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7343se_IRQ(void)
+{
+	se7343_irq_regs = ioremap(PA_CPLD_BASE_ADDR, SZ_16);
+	if (unlikely(!se7343_irq_regs)) {
+		pr_err("Failed to remap CPLD\n");
+		return;
+	}
+
+	/*
+	 * All FPGA IRQs disabled by default
+	 */
+	iowrite16(0, se7343_irq_regs + PA_CPLD_IMSK_REG);
+
+	__raw_writew(0x2000, 0xb03fffec);	/* mrshpc irq enable */
+
+	se7343_domain_init();
+	se7343_gc_init();
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7343/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7343/setup.c
new file mode 100644
index 0000000..fe0e550
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7343/setup.c
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/usb/isp116x.h>
+#include <linux/delay.h>
+#include <linux/irqdomain.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7343.h>
+#include <asm/heartbeat.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 128 * 1024,
+	},
+	{
+		.name		= "rootfs",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 31 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x01ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+#define ST16C2550C_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP)
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	[0] = {
+		.iotype		= UPIO_MEM,
+		.mapbase	= 0x16000000,
+		.regshift	= 1,
+		.flags		= ST16C2550C_FLAGS,
+		.uartclk	= 7372800,
+	},
+	[1] = {
+		.iotype		= UPIO_MEM,
+		.mapbase	= 0x17000000,
+		.regshift	= 1,
+		.flags		= ST16C2550C_FLAGS,
+		.uartclk	= 7372800,
+	},
+	{ },
+};
+
+static struct platform_device uart_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static void isp116x_delay(struct device *dev, int delay)
+{
+	ndelay(delay);
+}
+
+static struct resource usb_resources[] = {
+	[0] = {
+		.start  = 0x11800000,
+		.end    = 0x11800001,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 0x11800002,
+		.end    = 0x11800003,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		/* Filled in later */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct isp116x_platform_data usb_platform_data = {
+	.sel15Kres		= 1,
+	.oc_enable		= 1,
+	.int_act_high		= 0,
+	.int_edge_triggered	= 0,
+	.remote_wakeup_enable	= 0,
+	.delay			= isp116x_delay,
+};
+
+static struct platform_device usb_device = {
+	.name			= "isp116x-hcd",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(usb_resources),
+	.resource		= usb_resources,
+	.dev			= {
+		.platform_data	= &usb_platform_data,
+	},
+
+};
+
+static struct platform_device *sh7343se_platform_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&uart_device,
+	&usb_device,
+};
+
+static int __init sh7343se_devices_setup(void)
+{
+	/* Wire-up dynamic vectors */
+	serial_platform_data[0].irq = irq_find_mapping(se7343_irq_domain,
+						       SE7343_FPGA_IRQ_UARTA);
+	serial_platform_data[1].irq = irq_find_mapping(se7343_irq_domain,
+						       SE7343_FPGA_IRQ_UARTB);
+	usb_resources[2].start = usb_resources[2].end =
+		irq_find_mapping(se7343_irq_domain, SE7343_FPGA_IRQ_USB);
+
+	return platform_add_devices(sh7343se_platform_devices,
+				    ARRAY_SIZE(sh7343se_platform_devices));
+}
+device_initcall(sh7343se_devices_setup);
+
+/*
+ * Initialize the board
+ */
+static void __init sh7343se_setup(char **cmdline_p)
+{
+	__raw_writew(0xf900, FPGA_OUT);	/* FPGA */
+
+	__raw_writew(0x0002, PORT_PECR);	/* PORT E 1 = IRQ5 */
+	__raw_writew(0x0020, PORT_PSELD);
+
+	printk(KERN_INFO "MS7343CP01 Setup...done\n");
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_7343se __initmv = {
+	.mv_name = "SolutionEngine 7343",
+	.mv_setup = sh7343se_setup,
+	.mv_init_irq = init_7343se_IRQ,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/770x/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/770x/Makefile
new file mode 100644
index 0000000..43ea14f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/770x/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the 770x SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/770x/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/770x/irq.c
new file mode 100644
index 0000000..66e2c8a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/770x/irq.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/770x/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ * Copyright (C) 2006  Nobuhiro Iwamatsu
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se.h>
+
+static struct ipr_data ipr_irq_table[] = {
+	/*
+	* Super I/O (Just mimic PC):
+	*  1: keyboard
+	*  3: serial 0
+	*  4: serial 1
+	*  5: printer
+	*  6: floppy
+	*  8: rtc
+	* 12: mouse
+	* 14: ide0
+	*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+	/* This is default value */
+	{ 13, 0, 8,  0x0f-13, },
+	{ 5 , 0, 4,  0x0f- 5, },
+	{ 10, 1, 0,  0x0f-10, },
+	{ 7 , 2, 4,  0x0f- 7, },
+	{ 3 , 2, 0,  0x0f- 3, },
+	{ 1 , 3, 12, 0x0f- 1, },
+	{ 12, 3, 4,  0x0f-12, }, /* LAN */
+	{ 2 , 4, 8,  0x0f- 2, }, /* PCIRQ2 */
+	{ 6 , 4, 4,  0x0f- 6, }, /* PCIRQ1 */
+	{ 14, 4, 0,  0x0f-14, }, /* PCIRQ0 */
+	{ 0 , 5, 12, 0x0f   , }, 
+	{ 4 , 5, 4,  0x0f- 4, },
+	{ 8 , 6, 12, 0x0f- 8, },
+	{ 9 , 6, 8,  0x0f- 9, },
+	{ 11, 6, 4,  0x0f-11, },
+#else
+	{ 14, 0,  8, 0x0f-14, },
+	{ 12, 0,  4, 0x0f-12, },
+	{  8, 1,  4, 0x0f- 8, },
+	{  6, 2, 12, 0x0f- 6, },
+	{  5, 2,  8, 0x0f- 5, },
+	{  4, 2,  4, 0x0f- 4, },
+	{  3, 2,  0, 0x0f- 3, },
+	{  1, 3, 12, 0x0f- 1, },
+#if defined(CONFIG_STNIC)
+	/* ST NIC */
+	{ 10, 3,  4, 0x0f-10, }, 	/* LAN */
+#endif
+	/* MRSHPC IRQs setting */
+	{  0, 4, 12, 0x0f- 0, },	/* PCIRQ3 */
+	{ 11, 4,  8, 0x0f-11, }, 	/* PCIRQ2 */
+	{  9, 4,  4, 0x0f- 9, }, 	/* PCIRQ1 */
+	{  7, 4,  0, 0x0f- 7, }, 	/* PCIRQ0 */
+	/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
+	/* NOTE: #2 and #13 are not used on PC */
+	{ 13, 6,  4, 0x0f-13, }, 	/* SLOTIRQ2 */
+	{  2, 6,  0, 0x0f- 2, }, 	/* SLOTIRQ1 */
+#endif
+};
+
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+	.chip = {
+		.name	= "IPR-se770x",
+	},
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se_IRQ(void)
+{
+	/* Disable all interrupts */
+	__raw_writew(0, BCR_ILCRA);
+	__raw_writew(0, BCR_ILCRB);
+	__raw_writew(0, BCR_ILCRC);
+	__raw_writew(0, BCR_ILCRD);
+	__raw_writew(0, BCR_ILCRE);
+	__raw_writew(0, BCR_ILCRF);
+	__raw_writew(0, BCR_ILCRG);
+
+	register_ipr_controller(&ipr_irq_desc);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/770x/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/770x/setup.c
new file mode 100644
index 0000000..b7fa7a8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/770x/setup.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/770x/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sh_eth.h>
+#include <mach-se/mach/se.h>
+#include <mach-se/mach/mrshpc.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/smc37c93x.h>
+#include <asm/heartbeat.h>
+
+/*
+ * Configure the Super I/O chip
+ */
+static void __init smsc_config(int index, int data)
+{
+	outb_p(index, INDEX_PORT);
+	outb_p(data, DATA_PORT);
+}
+
+/* XXX: Another candidate for a more generic cchip machine vector */
+static void __init smsc_setup(char **cmdline_p)
+{
+	outb_p(CONFIG_ENTER, CONFIG_PORT);
+	outb_p(CONFIG_ENTER, CONFIG_PORT);
+
+	/* FDC */
+	smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
+
+	/* AUXIO (GPIO): to use IDE1 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
+	smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
+	smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
+
+	/* COM1 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IO_BASE_HI_INDEX, 0x03);
+	smsc_config(IO_BASE_LO_INDEX, 0xf8);
+	smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
+
+	/* COM2 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IO_BASE_HI_INDEX, 0x02);
+	smsc_config(IO_BASE_LO_INDEX, 0xf8);
+	smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
+
+	/* RTC */
+	smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
+
+	/* XXX: PARPORT, KBD, and MOUSE will come here... */
+	outb_p(CONFIG_EXIT, CONFIG_PORT);
+}
+
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = PA_MRSHPC_IO + 0x1f0,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start  = IRQ_CFCARD,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
+/* SH771X Ethernet driver */
+static struct sh_eth_plat_data sh_eth_plat = {
+	.phy = PHY_ID,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource sh_eth0_resources[] = {
+	[0] = {
+		.start = SH_ETH0_BASE,
+		.end = SH_ETH0_BASE + 0x1B8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_ETH0_IRQ,
+		.end = SH_ETH0_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth0_device = {
+	.name = "sh771x-ether",
+	.id = 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth0_resources),
+	.resource = sh_eth0_resources,
+};
+
+static struct resource sh_eth1_resources[] = {
+	[0] = {
+		.start = SH_ETH1_BASE,
+		.end = SH_ETH1_BASE + 0x1B8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_ETH1_IRQ,
+		.end = SH_ETH1_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth1_device = {
+	.name = "sh771x-ether",
+	.id = 1,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth1_resources),
+	.resource = sh_eth1_resources,
+};
+#endif
+
+static struct platform_device *se_devices[] __initdata = {
+	&heartbeat_device,
+	&cf_ide_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
+	&sh_eth0_device,
+	&sh_eth1_device,
+#endif
+};
+
+static int __init se_devices_setup(void)
+{
+	mrshpc_setup_windows();
+	return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
+}
+device_initcall(se_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_setup		= smsc_setup,
+	.mv_init_irq		= init_se_IRQ,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7721/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7721/Makefile
new file mode 100644
index 0000000..7f09030
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7721/Makefile
@@ -0,0 +1 @@
+obj-y	 := setup.o irq.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7721/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7721/irq.c
new file mode 100644
index 0000000..d85022e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7721/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/se/7721/irq.c
+ *
+ * Copyright (C) 2008  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7721.h>
+
+enum {
+	UNUSED = 0,
+
+	/* board specific interrupt sources */
+	MRSHPC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
+	  { 0, MRSHPC } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
+			 NULL, NULL, prio_registers, NULL);
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7721_IRQ(void)
+{
+	/* PPCR */
+	__raw_writew(__raw_readw(0xa4050118) & ~0x00ff, 0xa4050118);
+
+	register_intc_controller(&intc_desc);
+	intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7721/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7721/setup.c
new file mode 100644
index 0000000..a0b3dba
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7721/setup.c
@@ -0,0 +1,96 @@
+/*
+ * linux/arch/sh/boards/se/7721/setup.c
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * Hitachi UL SolutionEngine 7721 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <mach-se/mach/se7721.h>
+#include <mach-se/mach/mrshpc.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start	= PA_MRSHPC_IO + 0x1f0,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 ,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.start	= PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+		.flags	= IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = MRSHPC_IRQ0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct platform_device *se7721_devices[] __initdata = {
+	&cf_ide_device,
+	&heartbeat_device
+};
+
+static int __init se7721_devices_setup(void)
+{
+	mrshpc_setup_windows();
+	return platform_add_devices(se7721_devices, ARRAY_SIZE(se7721_devices));
+}
+device_initcall(se7721_devices_setup);
+
+static void __init se7721_setup(char **cmdline_p)
+{
+	/* for USB */
+	__raw_writew(0x0000, 0xA405010C);	/* PGCR */
+	__raw_writew(0x0000, 0xA405010E);	/* PHCR */
+	__raw_writew(0x00AA, 0xA4050118);	/* PPCR */
+	__raw_writew(0x0000, 0xA4050124);	/* PSELA */
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_se7721 __initmv = {
+	.mv_name		= "Solution Engine 7721",
+	.mv_setup		= se7721_setup,
+	.mv_init_irq		= init_se7721_IRQ,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7722/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7722/Makefile
new file mode 100644
index 0000000..8694373
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7722/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the HITACHI UL SolutionEngine 7722 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y	 := setup.o irq.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7722/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7722/irq.c
new file mode 100644
index 0000000..24c74a8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7722/irq.c
@@ -0,0 +1,119 @@
+/*
+ * Hitachi UL SolutionEngine 7722 FPGA IRQ Support.
+ *
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ * Copyright (C) 2012  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define DRV_NAME "SE7722-FPGA"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <asm/sizes.h>
+#include <mach-se/mach/se7722.h>
+
+#define IRQ01_BASE_ADDR	0x11800000
+#define IRQ01_MODE_REG	0
+#define IRQ01_STS_REG	4
+#define IRQ01_MASK_REG	8
+
+static void __iomem *se7722_irq_regs;
+struct irq_domain *se7722_irq_domain;
+
+static void se7722_irq_demux(struct irq_desc *desc)
+{
+	struct irq_data *data = irq_desc_get_irq_data(desc);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	unsigned long mask;
+	int bit;
+
+	chip->irq_mask_ack(data);
+
+	mask = ioread16(se7722_irq_regs + IRQ01_STS_REG);
+
+	for_each_set_bit(bit, &mask, SE7722_FPGA_IRQ_NR)
+		generic_handle_irq(irq_linear_revmap(se7722_irq_domain, bit));
+
+	chip->irq_unmask(data);
+}
+
+static void __init se7722_domain_init(void)
+{
+	int i;
+
+	se7722_irq_domain = irq_domain_add_linear(NULL, SE7722_FPGA_IRQ_NR,
+						  &irq_domain_simple_ops, NULL);
+	if (unlikely(!se7722_irq_domain)) {
+		printk("Failed to get IRQ domain\n");
+		return;
+	}
+
+	for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
+		int irq = irq_create_mapping(se7722_irq_domain, i);
+
+		if (unlikely(irq == 0)) {
+			printk("Failed to allocate IRQ %d\n", i);
+			return;
+		}
+	}
+}
+
+static void __init se7722_gc_init(void)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	unsigned int irq_base;
+
+	irq_base = irq_linear_revmap(se7722_irq_domain, 0);
+
+	gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7722_irq_regs,
+				    handle_level_irq);
+	if (unlikely(!gc))
+		return;
+
+	ct = gc->chip_types;
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+
+	ct->regs.mask = IRQ01_MASK_REG;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(SE7722_FPGA_IRQ_NR),
+			       IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+
+	irq_set_chained_handler(IRQ0_IRQ, se7722_irq_demux);
+	irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ1_IRQ, se7722_irq_demux);
+	irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
+
+/*
+ * Initialize FPGA IRQs
+ */
+void __init init_se7722_IRQ(void)
+{
+	se7722_irq_regs = ioremap(IRQ01_BASE_ADDR, SZ_16);
+	if (unlikely(!se7722_irq_regs)) {
+		printk("Failed to remap IRQ01 regs\n");
+		return;
+	}
+
+	/*
+	 * All FPGA IRQs disabled by default
+	 */
+	iowrite16(0, se7722_irq_regs + IRQ01_MASK_REG);
+
+	__raw_writew(0x2000, 0xb03fffec);  /* mrshpc irq enable */
+
+	se7722_domain_init();
+	se7722_gc_init();
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7722/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7722/setup.c
new file mode 100644
index 0000000..e04e2bc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7722/setup.c
@@ -0,0 +1,194 @@
+/*
+ * linux/arch/sh/boards/se/7722/setup.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ * Copyright (C) 2012 Paul Mundt
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/irqdomain.h>
+#include <linux/smc91x.h>
+#include <linux/sh_intc.h>
+#include <mach-se/mach/se7722.h>
+#include <mach-se/mach/mrshpc.h>
+#include <asm/machvec.h>
+#include <asm/clock.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+#include <cpu/sh7722.h>
+
+/* Heartbeat */
+static struct resource heartbeat_resource = {
+	.start  = PA_LED,
+	.end    = PA_LED,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
+};
+
+/* SMC91x */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		/* Filled in later */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+		.platform_data	= &smc91x_info,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = PA_MRSHPC_IO + 0x1f0,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8 ,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] = {
+		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[2] = {
+		/* Filled in later */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static struct sh_keysc_info sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
+	.scan_timing = 3,
+	.delay = 5,
+	.keycodes = { /* SW1 -> SW30 */
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
+		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
+		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
+		KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
+		KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
+		KEY_Z,
+		KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
+	},
+};
+
+static struct resource sh_keysc_resources[] = {
+	[0] = {
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xbe0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
+	.resource       = sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &sh_keysc_info,
+	},
+};
+
+static struct platform_device *se7722_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+	&cf_ide_device,
+	&sh_keysc_device,
+};
+
+static int __init se7722_devices_setup(void)
+{
+	mrshpc_setup_windows();
+
+	/* Wire-up dynamic vectors */
+	cf_ide_resources[2].start = cf_ide_resources[2].end =
+		irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_MRSHPC0);
+
+	smc91x_eth_resources[1].start = smc91x_eth_resources[1].end =
+		irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_SMC);
+
+	return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices));
+}
+device_initcall(se7722_devices_setup);
+
+static void __init se7722_setup(char **cmdline_p)
+{
+	__raw_writew(0x010D, FPGA_OUT);    /* FPGA */
+
+	__raw_writew(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
+	__raw_writew(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
+
+	/* LCDC I/O */
+	__raw_writew(0x0020, PORT_PSELD);
+
+	/* SIOF1*/
+	__raw_writew(0x0003, PORT_PSELB);
+	__raw_writew(0xe000, PORT_PSELC);
+	__raw_writew(0x0000, PORT_PKCR);
+
+	/* LCDC */
+	__raw_writew(0x4020, PORT_PHCR);
+	__raw_writew(0x0000, PORT_PLCR);
+	__raw_writew(0x0000, PORT_PMCR);
+	__raw_writew(0x0002, PORT_PRCR);
+	__raw_writew(0x0000, PORT_PXCR);   /* LCDC,CS6A */
+
+	/* KEYSC */
+	__raw_writew(0x0A10, PORT_PSELA); /* BS,SHHID2 */
+	__raw_writew(0x0000, PORT_PYCR);
+	__raw_writew(0x0000, PORT_PZCR);
+	__raw_writew(__raw_readw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+	__raw_writew(__raw_readw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7722 __initmv = {
+	.mv_name                = "Solution Engine 7722" ,
+	.mv_setup               = se7722_setup ,
+	.mv_init_irq		= init_se7722_IRQ,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7724/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7724/Makefile
new file mode 100644
index 0000000..a08b368
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7724/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the HITACHI UL SolutionEngine 7724 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y	 := setup.o irq.o sdram.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7724/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7724/irq.c
new file mode 100644
index 0000000..64e681e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7724/irq.c
@@ -0,0 +1,146 @@
+/*
+ * linux/arch/sh/boards/se/7724/irq.c
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on  linux/arch/sh/boards/se/7722/irq.c
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7724 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/export.h>
+#include <linux/topology.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <mach-se/mach/se7724.h>
+
+struct fpga_irq {
+	unsigned long  sraddr;
+	unsigned long  mraddr;
+	unsigned short mask;
+	unsigned int   base;
+};
+
+static unsigned int fpga2irq(unsigned int irq)
+{
+	if (irq >= IRQ0_BASE &&
+	    irq <= IRQ0_END)
+		return IRQ0_IRQ;
+	else if (irq >= IRQ1_BASE &&
+		 irq <= IRQ1_END)
+		return IRQ1_IRQ;
+	else
+		return IRQ2_IRQ;
+}
+
+static struct fpga_irq get_fpga_irq(unsigned int irq)
+{
+	struct fpga_irq set;
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		set.sraddr = IRQ0_SR;
+		set.mraddr = IRQ0_MR;
+		set.mask   = IRQ0_MASK;
+		set.base   = IRQ0_BASE;
+		break;
+	case IRQ1_IRQ:
+		set.sraddr = IRQ1_SR;
+		set.mraddr = IRQ1_MR;
+		set.mask   = IRQ1_MASK;
+		set.base   = IRQ1_BASE;
+		break;
+	default:
+		set.sraddr = IRQ2_SR;
+		set.mraddr = IRQ2_MR;
+		set.mask   = IRQ2_MASK;
+		set.base   = IRQ2_BASE;
+		break;
+	}
+
+	return set;
+}
+
+static void disable_se7724_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
+	unsigned int bit = irq - set.base;
+	__raw_writew(__raw_readw(set.mraddr) | 0x0001 << bit, set.mraddr);
+}
+
+static void enable_se7724_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
+	unsigned int bit = irq - set.base;
+	__raw_writew(__raw_readw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
+}
+
+static struct irq_chip se7724_irq_chip __read_mostly = {
+	.name		= "SE7724-FPGA",
+	.irq_mask	= disable_se7724_irq,
+	.irq_unmask	= enable_se7724_irq,
+};
+
+static void se7724_irq_demux(struct irq_desc *desc)
+{
+	unsigned int irq = irq_desc_get_irq(desc);
+	struct fpga_irq set = get_fpga_irq(irq);
+	unsigned short intv = __raw_readw(set.sraddr);
+	unsigned int ext_irq = set.base;
+
+	intv &= set.mask;
+
+	for (; intv; intv >>= 1, ext_irq++) {
+		if (!(intv & 1))
+			continue;
+
+		generic_handle_irq(ext_irq);
+	}
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7724_IRQ(void)
+{
+	int irq_base, i;
+
+	__raw_writew(0xffff, IRQ0_MR);  /* mask all */
+	__raw_writew(0xffff, IRQ1_MR);  /* mask all */
+	__raw_writew(0xffff, IRQ2_MR);  /* mask all */
+	__raw_writew(0x0000, IRQ0_SR);  /* clear irq */
+	__raw_writew(0x0000, IRQ1_SR);  /* clear irq */
+	__raw_writew(0x0000, IRQ2_SR);  /* clear irq */
+	__raw_writew(0x002a, IRQ_MODE); /* set irq type */
+
+	irq_base = irq_alloc_descs(SE7724_FPGA_IRQ_BASE, SE7724_FPGA_IRQ_BASE,
+				   SE7724_FPGA_IRQ_NR, numa_node_id());
+	if (IS_ERR_VALUE(irq_base)) {
+		pr_err("%s: failed hooking irqs for FPGA\n", __func__);
+		return;
+	}
+
+	for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
+		irq_set_chip_and_handler_name(irq_base + i, &se7724_irq_chip,
+					      handle_level_irq, "level");
+
+	irq_set_chained_handler(IRQ0_IRQ, se7724_irq_demux);
+	irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ1_IRQ, se7724_irq_demux);
+	irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ2_IRQ, se7724_irq_demux);
+	irq_set_irq_type(IRQ2_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7724/sdram.S b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7724/sdram.S
new file mode 100644
index 0000000..6fa4734
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7724/sdram.S
@@ -0,0 +1,131 @@
+/*
+ * MS7724SE sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(ms7724se_sdram_enter_start)
+
+	/* DBSC: put memory in self-refresh mode */
+
+	ED 0xFD000010, 0x00000000 /* DBEN */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(ms7724se_sdram_enter_end)
+
+	.balign 4
+ENTRY(ms7724se_sdram_leave_start)
+
+	/* DBSC: put memory in auto-refresh mode */
+
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_RSTANDBY, r0
+	bf	resume_rstandby
+
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	WAIT 1
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+resume_rstandby:
+
+	/* CPG: setup clocks before restarting external memory */
+
+	ED 0xA4150024, 0x00004000 /* PLLCR */
+
+	mov.l	FRQCRA,r0
+	mov.l	@r0,r3
+	mov.l	KICK,r1
+	or	r1, r3
+	mov.l	r3, @r0
+
+	mov.l	LSTATS,r0
+	mov	#1,r1
+WAIT_LSTATS:
+	mov.l	@r0,r3
+	tst	r1,r3
+	bf	WAIT_LSTATS
+
+	/* DBSC: re-initialize and put in auto-refresh */
+
+	ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
+	ED 0xFD000020, 0x015B0002 /* DBCONF */
+	ED 0xFD000030, 0x03071502 /* DBTR0 */
+	ED 0xFD000034, 0x02020102 /* DBTR1 */
+	ED 0xFD000038, 0x01090405 /* DBTR2 */
+	ED 0xFD00003C, 0x00000002 /* DBTR3 */
+	ED 0xFD000008, 0x00000005 /* DBKIND */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000018, 0x00000001 /* DBCKECNT */
+
+	mov	#100,r0
+WAIT_400NS:
+	dt	r0
+	bf	WAIT_400NS
+
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
+	ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
+	ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
+	ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
+	ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
+	ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
+
+	mov	#100,r0
+WAIT_400NS_2:
+	dt	r0
+	bf	WAIT_400NS_2
+
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
+	ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
+
+	mov.l	DUMMY,r0
+	mov.l	@r0, r1 /* force single dummy read */
+
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+	.balign 4
+DUMMY:	.long	0xac400000
+FRQCRA:	.long	0xa4150000
+KICK:	.long	0x80000000
+LSTATS:	.long	0xa4150060
+
+ENTRY(ms7724se_sdram_leave_end)
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7724/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7724/setup.c
new file mode 100644
index 0000000..f1fecd3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7724/setup.c
@@ -0,0 +1,946 @@
+/*
+ * linux/arch/sh/boards/se/7724/setup.c
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smc91x.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/sh_eth.h>
+#include <linux/sh_intc.h>
+#include <linux/videodev2.h>
+#include <video/sh_mobile_lcdc.h>
+#include <media/drv-intf/sh_mobile_ceu.h>
+#include <sound/sh_fsi.h>
+#include <sound/simple_card.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+#include <asm/clock.h>
+#include <asm/suspend.h>
+#include <cpu/sh7724.h>
+#include <mach-se/mach/se7724.h>
+
+/*
+ * SWx    1234 5678
+ * ------------------------------------
+ * SW31 : 1001 1100    : default
+ * SW32 : 0111 1111    : use on board flash
+ *
+ * SW41 : abxx xxxx  -> a = 0 : Analog  monitor
+ *                          1 : Digital monitor
+ *                      b = 0 : VGA
+ *                          1 : 720p
+ */
+
+/*
+ * about 720p
+ *
+ * When you use 1280 x 720 lcdc output,
+ * you should change OSC6 lcdc clock from 25.175MHz to 74.25MHz,
+ * and change SW41 to use 720p
+ */
+
+/*
+ * about sound
+ *
+ * This setup.c supports FSI slave mode.
+ * Please change J20, J21, J22 pin to 1-2 connection.
+ */
+
+/* Heartbeat */
+static struct resource heartbeat_resource = {
+	.start  = PA_LED,
+	.end    = PA_LED,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
+};
+
+/* LAN91C111 */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "SMC91C111" ,
+		.start  = 0x1a300300,
+		.end    = 0x1a30030f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ0_SMC,
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name	= "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = (1 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (2 * 1024 * 1024),
+	}, {
+		.name = "free-area",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x01ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.dev		= {
+		.platform_data = &nor_flash_data,
+	},
+};
+
+/* LCDC */
+static const struct fb_videomode lcdc_720p_modes[] = {
+	{
+		.name		= "LB070WV1",
+		.sync		= 0, /* hsync and vsync are active low */
+		.xres		= 1280,
+		.yres		= 720,
+		.left_margin	= 220,
+		.right_margin	= 110,
+		.hsync_len	= 40,
+		.upper_margin	= 20,
+		.lower_margin	= 5,
+		.vsync_len	= 5,
+	},
+};
+
+static const struct fb_videomode lcdc_vga_modes[] = {
+	{
+		.name		= "LB070WV1",
+		.sync		= 0, /* hsync and vsync are active low */
+		.xres		= 640,
+		.yres		= 480,
+		.left_margin	= 105,
+		.right_margin	= 50,
+		.hsync_len	= 96,
+		.upper_margin	= 33,
+		.lower_margin	= 10,
+		.vsync_len	= 2,
+	},
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_EXTERNAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.clock_divider = 1,
+		.panel_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xf40),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+};
+
+/* CEU0 */
+static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu0_resources[] = {
+	[0] = {
+		.name	= "CEU0",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x880),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu0_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(ceu0_resources),
+	.resource	= ceu0_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu0_info,
+	},
+};
+
+/* CEU1 */
+static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu1_resources[] = {
+	[0] = {
+		.name	= "CEU1",
+		.start	= 0xfe914000,
+		.end	= 0xfe91409f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x9e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu1_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 1, /* "ceu1" clock */
+	.num_resources	= ARRAY_SIZE(ceu1_resources),
+	.resource	= ceu1_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu1_info,
+	},
+};
+
+/* FSI */
+/* change J20, J21, J22 pin to 1-2 connection to use slave mode */
+static struct resource fsi_resources[] = {
+	[0] = {
+		.name	= "FSI",
+		.start	= 0xFE3C0000,
+		.end	= 0xFE3C021d,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xf80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device fsi_device = {
+	.name		= "sh_fsi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(fsi_resources),
+	.resource	= fsi_resources,
+};
+
+static struct asoc_simple_card_info fsi_ak4642_info = {
+	.name		= "AK4642",
+	.card		= "FSIA-AK4642",
+	.codec		= "ak4642-codec.0-0012",
+	.platform	= "sh_fsi.0",
+	.daifmt		= SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
+	.cpu_dai = {
+		.name	= "fsia-dai",
+	},
+	.codec_dai = {
+		.name	= "ak4642-hifi",
+		.sysclk	= 11289600,
+	},
+};
+
+static struct platform_device fsi_ak4642_device = {
+	.name	= "asoc-simple-card",
+	.dev	= {
+		.platform_data	= &fsi_ak4642_info,
+	},
+};
+
+/* KEYSC in SoC (Needs SW33-2 set to ON) */
+static struct sh_keysc_info keysc_info = {
+	.mode = SH_KEYSC_MODE_1,
+	.scan_timing = 3,
+	.delay = 50,
+	.keycodes = {
+		KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
+		KEY_6, KEY_7, KEY_8, KEY_9, KEY_A,
+		KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
+		KEY_G, KEY_H, KEY_I, KEY_K, KEY_L,
+		KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q,
+		KEY_R, KEY_S, KEY_T, KEY_U, KEY_V,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xbe0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
+/* SH Eth */
+static struct resource sh_eth_resources[] = {
+	[0] = {
+		.start = SH_ETH_ADDR,
+		.end   = SH_ETH_ADDR + 0x1FC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = evt2irq(0xd60),
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct sh_eth_plat_data sh_eth_plat = {
+	.phy = 0x1f, /* SMSC LAN8187 */
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh7724-ether",
+	.id = 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+	.resource = sh_eth_resources,
+};
+
+static struct r8a66597_platdata sh7724_usb0_host_data = {
+	.on_chip = 1,
+};
+
+static struct resource sh7724_usb0_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d80000,
+		.end	= 0xa4d80124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa20),
+		.end	= evt2irq(0xa20),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device sh7724_usb0_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh7724_usb0_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(sh7724_usb0_host_resources),
+	.resource	= sh7724_usb0_host_resources,
+};
+
+static struct r8a66597_platdata sh7724_usb1_gadget_data = {
+	.on_chip = 1,
+};
+
+static struct resource sh7724_usb1_gadget_resources[] = {
+	[0] = {
+		.start	= 0xa4d90000,
+		.end	= 0xa4d90123,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa40),
+		.end	= evt2irq(0xa40),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device sh7724_usb1_gadget_device = {
+	.name		= "r8a66597_udc",
+	.id		= 1, /* USB1 */
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh7724_usb1_gadget_data,
+	},
+	.num_resources	= ARRAY_SIZE(sh7724_usb1_gadget_resources),
+	.resource	= sh7724_usb1_gadget_resources,
+};
+
+/* Fixed 3.3V regulator to be used by SDHI0, SDHI1 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
+static struct resource sdhi0_cn7_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0x04ce0000,
+		.end    = 0x04ce00ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xe80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct tmio_mmc_data sh7724_sdhi0_data = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
+	.capabilities	= MMC_CAP_SDIO_IRQ,
+};
+
+static struct platform_device sdhi0_cn7_device = {
+	.name           = "sh_mobile_sdhi",
+	.id		= 0,
+	.num_resources  = ARRAY_SIZE(sdhi0_cn7_resources),
+	.resource       = sdhi0_cn7_resources,
+	.dev = {
+		.platform_data	= &sh7724_sdhi0_data,
+	},
+};
+
+static struct resource sdhi1_cn8_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start  = 0x04cf0000,
+		.end    = 0x04cf00ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x4e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct tmio_mmc_data sh7724_sdhi1_data = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI1_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI1_RX,
+	.capabilities	= MMC_CAP_SDIO_IRQ,
+};
+
+static struct platform_device sdhi1_cn8_device = {
+	.name           = "sh_mobile_sdhi",
+	.id		= 1,
+	.num_resources  = ARRAY_SIZE(sdhi1_cn8_resources),
+	.resource       = sdhi1_cn8_resources,
+	.dev = {
+		.platform_data	= &sh7724_sdhi1_data,
+	},
+};
+
+/* IrDA */
+static struct resource irda_resources[] = {
+	[0] = {
+		.name	= "IrDA",
+		.start  = 0xA45D0000,
+		.end    = 0xA45D0049,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x480),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device irda_device = {
+	.name           = "sh_sir",
+	.num_resources  = ARRAY_SIZE(irda_resources),
+	.resource       = irda_resources,
+};
+
+#include <media/i2c/ak881x.h>
+#include <media/drv-intf/sh_vou.h>
+
+static struct ak881x_pdata ak881x_pdata = {
+	.flags = AK881X_IF_MODE_SLAVE,
+};
+
+static struct i2c_board_info ak8813 = {
+	/* With open J18 jumper address is 0x21 */
+	I2C_BOARD_INFO("ak8813", 0x20),
+	.platform_data = &ak881x_pdata,
+};
+
+static struct sh_vou_pdata sh_vou_pdata = {
+	.bus_fmt	= SH_VOU_BUS_8BIT,
+	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
+	.board_info	= &ak8813,
+	.i2c_adap	= 0,
+};
+
+static struct resource sh_vou_resources[] = {
+	[0] = {
+		.start  = 0xfe960000,
+		.end    = 0xfe962043,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x8e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vou_device = {
+	.name           = "sh-vou",
+	.id		= -1,
+	.num_resources  = ARRAY_SIZE(sh_vou_resources),
+	.resource       = sh_vou_resources,
+	.dev		= {
+		.platform_data	= &sh_vou_pdata,
+	},
+};
+
+static struct platform_device *ms7724se_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+	&lcdc_device,
+	&nor_flash_device,
+	&ceu0_device,
+	&ceu1_device,
+	&keysc_device,
+	&sh_eth_device,
+	&sh7724_usb0_host_device,
+	&sh7724_usb1_gadget_device,
+	&fsi_device,
+	&fsi_ak4642_device,
+	&sdhi0_cn7_device,
+	&sdhi1_cn8_device,
+	&irda_device,
+	&vou_device,
+};
+
+/* I2C device */
+static struct i2c_board_info i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("ak4642", 0x12),
+	},
+};
+
+#define EEPROM_OP   0xBA206000
+#define EEPROM_ADR  0xBA206004
+#define EEPROM_DATA 0xBA20600C
+#define EEPROM_STAT 0xBA206010
+#define EEPROM_STRT 0xBA206014
+
+static int __init sh_eth_is_eeprom_ready(void)
+{
+	int t = 10000;
+
+	while (t--) {
+		if (!__raw_readw(EEPROM_STAT))
+			return 1;
+		udelay(1);
+	}
+
+	printk(KERN_ERR "ms7724se can not access to eeprom\n");
+	return 0;
+}
+
+static void __init sh_eth_init(void)
+{
+	int i;
+	u16 mac;
+
+	/* check EEPROM status */
+	if (!sh_eth_is_eeprom_ready())
+		return;
+
+	/* read MAC addr from EEPROM */
+	for (i = 0 ; i < 3 ; i++) {
+		__raw_writew(0x0, EEPROM_OP); /* read */
+		__raw_writew(i*2, EEPROM_ADR);
+		__raw_writew(0x1, EEPROM_STRT);
+		if (!sh_eth_is_eeprom_ready())
+			return;
+
+		mac = __raw_readw(EEPROM_DATA);
+		sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
+		sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
+	}
+}
+
+#define SW4140    0xBA201000
+#define FPGA_OUT  0xBA200400
+#define PORT_HIZA 0xA4050158
+#define PORT_MSELCRB 0xA4050182
+
+#define SW41_A    0x0100
+#define SW41_B    0x0200
+#define SW41_C    0x0400
+#define SW41_D    0x0800
+#define SW41_E    0x1000
+#define SW41_F    0x2000
+#define SW41_G    0x4000
+#define SW41_H    0x8000
+
+extern char ms7724se_sdram_enter_start;
+extern char ms7724se_sdram_enter_end;
+extern char ms7724se_sdram_leave_start;
+extern char ms7724se_sdram_leave_end;
+
+static int __init arch_setup(void)
+{
+	/* enable I2C device */
+	i2c_register_board_info(0, i2c0_devices,
+				ARRAY_SIZE(i2c0_devices));
+	return 0;
+}
+arch_initcall(arch_setup);
+
+static int __init devices_setup(void)
+{
+	u16 sw = __raw_readw(SW4140); /* select camera, monitor */
+	struct clk *clk;
+	u16 fpga_out;
+
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+					SUSP_SH_RSTANDBY,
+					&ms7724se_sdram_enter_start,
+					&ms7724se_sdram_enter_end,
+					&ms7724se_sdram_leave_start,
+					&ms7724se_sdram_leave_end);
+
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
+	/* Reset Release */
+	fpga_out = __raw_readw(FPGA_OUT);
+	/* bit4: NTSC_PDN, bit5: NTSC_RESET */
+	fpga_out &= ~((1 << 1)  | /* LAN */
+		      (1 << 4)  | /* AK8813 PDN */
+		      (1 << 5)  | /* AK8813 RESET */
+		      (1 << 6)  | /* VIDEO DAC */
+		      (1 << 7)  | /* AK4643 */
+		      (1 << 8)  | /* IrDA */
+		      (1 << 12) | /* USB0 */
+		      (1 << 14)); /* RMII */
+	__raw_writew(fpga_out | (1 << 4), FPGA_OUT);
+
+	udelay(10);
+
+	/* AK8813 RESET */
+	__raw_writew(fpga_out | (1 << 5), FPGA_OUT);
+
+	udelay(10);
+
+	__raw_writew(fpga_out, FPGA_OUT);
+
+	/* turn on USB clocks, use external clock */
+	__raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+
+	/* Let LED9 show STATUS2 */
+	gpio_request(GPIO_FN_STATUS2, NULL);
+
+	/* Lit LED10 show STATUS0 */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* Lit LED11 show PDSTATUS */
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+
+	/* enable USB0 port */
+	__raw_writew(0x0600, 0xa40501d4);
+
+	/* enable USB1 port */
+	__raw_writew(0x0600, 0xa4050192);
+
+	/* enable IRQ 0,1,2 */
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+	gpio_request(GPIO_FN_INTC_IRQ2, NULL);
+
+	/* enable SCIFA3 */
+	gpio_request(GPIO_FN_SCIF3_I_SCK, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_RXD, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_TXD, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_CTS, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_RTS, NULL);
+
+	/* enable LCDC */
+	gpio_request(GPIO_FN_LCDD23,   NULL);
+	gpio_request(GPIO_FN_LCDD22,   NULL);
+	gpio_request(GPIO_FN_LCDD21,   NULL);
+	gpio_request(GPIO_FN_LCDD20,   NULL);
+	gpio_request(GPIO_FN_LCDD19,   NULL);
+	gpio_request(GPIO_FN_LCDD18,   NULL);
+	gpio_request(GPIO_FN_LCDD17,   NULL);
+	gpio_request(GPIO_FN_LCDD16,   NULL);
+	gpio_request(GPIO_FN_LCDD15,   NULL);
+	gpio_request(GPIO_FN_LCDD14,   NULL);
+	gpio_request(GPIO_FN_LCDD13,   NULL);
+	gpio_request(GPIO_FN_LCDD12,   NULL);
+	gpio_request(GPIO_FN_LCDD11,   NULL);
+	gpio_request(GPIO_FN_LCDD10,   NULL);
+	gpio_request(GPIO_FN_LCDD9,    NULL);
+	gpio_request(GPIO_FN_LCDD8,    NULL);
+	gpio_request(GPIO_FN_LCDD7,    NULL);
+	gpio_request(GPIO_FN_LCDD6,    NULL);
+	gpio_request(GPIO_FN_LCDD5,    NULL);
+	gpio_request(GPIO_FN_LCDD4,    NULL);
+	gpio_request(GPIO_FN_LCDD3,    NULL);
+	gpio_request(GPIO_FN_LCDD2,    NULL);
+	gpio_request(GPIO_FN_LCDD1,    NULL);
+	gpio_request(GPIO_FN_LCDD0,    NULL);
+	gpio_request(GPIO_FN_LCDDISP,  NULL);
+	gpio_request(GPIO_FN_LCDHSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDCK,   NULL);
+	gpio_request(GPIO_FN_LCDVSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDON,   NULL);
+	gpio_request(GPIO_FN_LCDVEPWC, NULL);
+	gpio_request(GPIO_FN_LCDVCPWC, NULL);
+	gpio_request(GPIO_FN_LCDRD,    NULL);
+	gpio_request(GPIO_FN_LCDLCLK,  NULL);
+	__raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+
+	/* enable CEU0 */
+	gpio_request(GPIO_FN_VIO0_D15, NULL);
+	gpio_request(GPIO_FN_VIO0_D14, NULL);
+	gpio_request(GPIO_FN_VIO0_D13, NULL);
+	gpio_request(GPIO_FN_VIO0_D12, NULL);
+	gpio_request(GPIO_FN_VIO0_D11, NULL);
+	gpio_request(GPIO_FN_VIO0_D10, NULL);
+	gpio_request(GPIO_FN_VIO0_D9,  NULL);
+	gpio_request(GPIO_FN_VIO0_D8,  NULL);
+	gpio_request(GPIO_FN_VIO0_D7,  NULL);
+	gpio_request(GPIO_FN_VIO0_D6,  NULL);
+	gpio_request(GPIO_FN_VIO0_D5,  NULL);
+	gpio_request(GPIO_FN_VIO0_D4,  NULL);
+	gpio_request(GPIO_FN_VIO0_D3,  NULL);
+	gpio_request(GPIO_FN_VIO0_D2,  NULL);
+	gpio_request(GPIO_FN_VIO0_D1,  NULL);
+	gpio_request(GPIO_FN_VIO0_D0,  NULL);
+	gpio_request(GPIO_FN_VIO0_VD,  NULL);
+	gpio_request(GPIO_FN_VIO0_CLK, NULL);
+	gpio_request(GPIO_FN_VIO0_FLD, NULL);
+	gpio_request(GPIO_FN_VIO0_HD,  NULL);
+	platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
+
+	/* enable CEU1 */
+	gpio_request(GPIO_FN_VIO1_D7,  NULL);
+	gpio_request(GPIO_FN_VIO1_D6,  NULL);
+	gpio_request(GPIO_FN_VIO1_D5,  NULL);
+	gpio_request(GPIO_FN_VIO1_D4,  NULL);
+	gpio_request(GPIO_FN_VIO1_D3,  NULL);
+	gpio_request(GPIO_FN_VIO1_D2,  NULL);
+	gpio_request(GPIO_FN_VIO1_D1,  NULL);
+	gpio_request(GPIO_FN_VIO1_D0,  NULL);
+	gpio_request(GPIO_FN_VIO1_FLD, NULL);
+	gpio_request(GPIO_FN_VIO1_HD,  NULL);
+	gpio_request(GPIO_FN_VIO1_VD,  NULL);
+	gpio_request(GPIO_FN_VIO1_CLK, NULL);
+	platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
+
+	/* KEYSC */
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYIN4,      NULL);
+	gpio_request(GPIO_FN_KEYIN3,      NULL);
+	gpio_request(GPIO_FN_KEYIN2,      NULL);
+	gpio_request(GPIO_FN_KEYIN1,      NULL);
+	gpio_request(GPIO_FN_KEYIN0,      NULL);
+	gpio_request(GPIO_FN_KEYOUT3,     NULL);
+	gpio_request(GPIO_FN_KEYOUT2,     NULL);
+	gpio_request(GPIO_FN_KEYOUT1,     NULL);
+	gpio_request(GPIO_FN_KEYOUT0,     NULL);
+
+	/* enable FSI */
+	gpio_request(GPIO_FN_FSIMCKA,    NULL);
+	gpio_request(GPIO_FN_FSIIASD,    NULL);
+	gpio_request(GPIO_FN_FSIOASD,    NULL);
+	gpio_request(GPIO_FN_FSIIABCK,   NULL);
+	gpio_request(GPIO_FN_FSIIALRCK,  NULL);
+	gpio_request(GPIO_FN_FSIOABCK,   NULL);
+	gpio_request(GPIO_FN_FSIOALRCK,  NULL);
+	gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
+
+	/* set SPU2 clock to 83.4 MHz */
+	clk = clk_get(NULL, "spu_clk");
+	if (!IS_ERR(clk)) {
+		clk_set_rate(clk, clk_round_rate(clk, 83333333));
+		clk_put(clk);
+	}
+
+	/* change parent of FSI A */
+	clk = clk_get(NULL, "fsia_clk");
+	if (!IS_ERR(clk)) {
+		/* 48kHz dummy clock was used to make sure 1/1 divide */
+		clk_set_rate(&sh7724_fsimcka_clk, 48000);
+		clk_set_parent(clk, &sh7724_fsimcka_clk);
+		clk_set_rate(clk, 48000);
+		clk_put(clk);
+	}
+
+	/* SDHI0 connected to cn7 */
+	gpio_request(GPIO_FN_SDHI0CD, NULL);
+	gpio_request(GPIO_FN_SDHI0WP, NULL);
+	gpio_request(GPIO_FN_SDHI0D3, NULL);
+	gpio_request(GPIO_FN_SDHI0D2, NULL);
+	gpio_request(GPIO_FN_SDHI0D1, NULL);
+	gpio_request(GPIO_FN_SDHI0D0, NULL);
+	gpio_request(GPIO_FN_SDHI0CMD, NULL);
+	gpio_request(GPIO_FN_SDHI0CLK, NULL);
+
+	/* SDHI1 connected to cn8 */
+	gpio_request(GPIO_FN_SDHI1CD, NULL);
+	gpio_request(GPIO_FN_SDHI1WP, NULL);
+	gpio_request(GPIO_FN_SDHI1D3, NULL);
+	gpio_request(GPIO_FN_SDHI1D2, NULL);
+	gpio_request(GPIO_FN_SDHI1D1, NULL);
+	gpio_request(GPIO_FN_SDHI1D0, NULL);
+	gpio_request(GPIO_FN_SDHI1CMD, NULL);
+	gpio_request(GPIO_FN_SDHI1CLK, NULL);
+
+	/* enable IrDA */
+	gpio_request(GPIO_FN_IRDA_OUT, NULL);
+	gpio_request(GPIO_FN_IRDA_IN,  NULL);
+
+	/*
+	 * enable SH-Eth
+	 *
+	 * please remove J33 pin from your board !!
+	 *
+	 * ms7724 board should not use GPIO_FN_LNKSTA pin
+	 * So, This time PTX5 is set to input pin
+	 */
+	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
+	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
+	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
+	gpio_request(GPIO_FN_MDIO,         NULL);
+	gpio_request(GPIO_FN_MDC,          NULL);
+	gpio_request(GPIO_PTX5, NULL);
+	gpio_direction_input(GPIO_PTX5);
+	sh_eth_init();
+
+	if (sw & SW41_B) {
+		/* 720p */
+		lcdc_info.ch[0].lcd_modes = lcdc_720p_modes;
+		lcdc_info.ch[0].num_modes = ARRAY_SIZE(lcdc_720p_modes);
+	} else {
+		/* VGA */
+		lcdc_info.ch[0].lcd_modes = lcdc_vga_modes;
+		lcdc_info.ch[0].num_modes = ARRAY_SIZE(lcdc_vga_modes);
+	}
+
+	if (sw & SW41_A) {
+		/* Digital monitor */
+		lcdc_info.ch[0].interface_type = RGB18;
+		lcdc_info.ch[0].flags          = 0;
+	} else {
+		/* Analog monitor */
+		lcdc_info.ch[0].interface_type = RGB24;
+		lcdc_info.ch[0].flags          = LCDC_FLAGS_DWPOL;
+	}
+
+	/* VOU */
+	gpio_request(GPIO_FN_DV_D15, NULL);
+	gpio_request(GPIO_FN_DV_D14, NULL);
+	gpio_request(GPIO_FN_DV_D13, NULL);
+	gpio_request(GPIO_FN_DV_D12, NULL);
+	gpio_request(GPIO_FN_DV_D11, NULL);
+	gpio_request(GPIO_FN_DV_D10, NULL);
+	gpio_request(GPIO_FN_DV_D9, NULL);
+	gpio_request(GPIO_FN_DV_D8, NULL);
+	gpio_request(GPIO_FN_DV_CLKI, NULL);
+	gpio_request(GPIO_FN_DV_CLK, NULL);
+	gpio_request(GPIO_FN_DV_VSYNC, NULL);
+	gpio_request(GPIO_FN_DV_HSYNC, NULL);
+
+	return platform_add_devices(ms7724se_devices,
+				    ARRAY_SIZE(ms7724se_devices));
+}
+device_initcall(devices_setup);
+
+static struct sh_machine_vector mv_ms7724se __initmv = {
+	.mv_name	= "ms7724se",
+	.mv_init_irq	= init_se7724_IRQ,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7751/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7751/Makefile
new file mode 100644
index 0000000..a338fd9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7751/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the 7751 SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7751/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7751/irq.c
new file mode 100644
index 0000000..dcefe58
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7751/irq.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/7751/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <mach-se/mach/se7751.h>
+
+static struct ipr_data ipr_irq_table[] = {
+	{ 13, 3, 3, 2 },
+	/* Add additional entries here as drivers are added and tested. */
+};
+
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-se7751",
+	},
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7751se_IRQ(void)
+{
+	register_ipr_controller(&ipr_irq_desc);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7751/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7751/setup.c
new file mode 100644
index 0000000..4c48060
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7751/setup.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/7751/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7751.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *se7751_devices[] __initdata = {
+	&heartbeat_device,
+};
+
+static int __init se7751_devices_setup(void)
+{
+	return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
+}
+device_initcall(se7751_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_7751se __initmv = {
+	.mv_name		= "7751 SolutionEngine",
+	.mv_init_irq		= init_7751se_IRQ,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7780/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7780/Makefile
new file mode 100644
index 0000000..6b88ada
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7780/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the HITACHI UL SolutionEngine 7780 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y	 := setup.o irq.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7780/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7780/irq.c
new file mode 100644
index 0000000..d5c9edc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7780/irq.c
@@ -0,0 +1,68 @@
+/*
+ * linux/arch/sh/boards/se/7780/irq.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7780.h>
+
+#define INTC_BASE	0xffd00000
+#define INTC_ICR1	(INTC_BASE+0x1c)
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7780_IRQ(void)
+{
+	/* enable all interrupt at FPGA */
+	__raw_writew(0, FPGA_INTMSK1);
+	/* mask SM501 interrupt */
+	__raw_writew((__raw_readw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
+	/* enable all interrupt at FPGA */
+	__raw_writew(0, FPGA_INTMSK2);
+
+	/* set FPGA INTSEL register */
+	/* FPGA + 0x06 */
+	__raw_writew( ((IRQPIN_SM501 << IRQPOS_SM501) |
+		(IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
+
+	/* FPGA + 0x08 */
+	__raw_writew(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
+		(IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
+		(IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
+		(IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
+
+	/* FPGA + 0x0A */
+	__raw_writew((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
+
+	plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
+
+	/* ICR1: detect low level(for 2ndcut) */
+	__raw_writel(0xAAAA0000, INTC_ICR1);
+
+	/*
+	 * FPGA PCISEL register initialize
+	 *
+	 *  CPU  || SLOT1 | SLOT2 | S-ATA | USB
+	 *  -------------------------------------
+	 *  INTA || INTA  | INTD  |  --   | INTB
+	 *  -------------------------------------
+	 *  INTB || INTB  | INTA  |  --   | INTC
+	 *  -------------------------------------
+	 *  INTC || INTC  | INTB  | INTA  |  --
+	 *  -------------------------------------
+	 *  INTD || INTD  | INTC  |  --   | INTA
+	 *  -------------------------------------
+	 */
+	__raw_writew(0x0013, FPGA_PCI_INTSEL1);
+	__raw_writew(0xE402, FPGA_PCI_INTSEL2);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7780/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7780/setup.c
new file mode 100644
index 0000000..ae5a1d8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/7780/setup.c
@@ -0,0 +1,114 @@
+/*
+ * linux/arch/sh/boards/se/7780/setup.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7780.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+/* Heartbeat */
+static struct resource heartbeat_resource = {
+	.start  = PA_LED,
+	.end    = PA_LED,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
+};
+
+/* SMC91x */
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = SMC_IRQ,
+		.end    = SMC_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct platform_device *se7780_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+};
+
+static int __init se7780_devices_setup(void)
+{
+	return platform_add_devices(se7780_devices,
+		ARRAY_SIZE(se7780_devices));
+}
+device_initcall(se7780_devices_setup);
+
+#define GPIO_PHCR        0xFFEA000E
+#define GPIO_PMSELR      0xFFEA0080
+#define GPIO_PECR        0xFFEA0008
+
+static void __init se7780_setup(char **cmdline_p)
+{
+	/* "SH-Linux" on LED Display */
+	__raw_writew( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
+	__raw_writew( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
+	__raw_writew( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
+	__raw_writew( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
+	__raw_writew( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
+	__raw_writew( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
+	__raw_writew( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
+	__raw_writew( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
+
+	printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
+
+	/*
+	 * PCI REQ/GNT setting
+	 *   REQ0/GNT0 -> USB
+	 *   REQ1/GNT1 -> PC Card
+	 *   REQ2/GNT2 -> Serial ATA
+	 *   REQ3/GNT3 -> PCI slot
+	 */
+	__raw_writew(0x0213, FPGA_REQSEL);
+
+	/* GPIO setting */
+	__raw_writew(0x0000, GPIO_PECR);
+	__raw_writew(__raw_readw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
+	__raw_writew(0x0c00, GPIO_PMSELR);
+
+	/* iVDR Power ON */
+	__raw_writew(0x0001, FPGA_IVDRPW);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7780 __initmv = {
+	.mv_name                = "Solution Engine 7780" ,
+	.mv_setup               = se7780_setup ,
+	.mv_init_irq		= init_se7780_IRQ,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/Makefile
new file mode 100644
index 0000000..8f69fc1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= board-se7619.o
+
+obj-$(CONFIG_SH_SOLUTION_ENGINE)	+= 770x/
+obj-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= 7206/
+obj-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= 7722/
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= 7751/
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= 7780/
+obj-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= 7343/
+obj-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= 7721/
+obj-$(CONFIG_SH_7724_SOLUTION_ENGINE)	+= 7724/
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-se/board-se7619.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/board-se7619.c
new file mode 100644
index 0000000..4431da6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-se/board-se7619.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/boards/se/7619/setup.c
+ *
+ * Copyright (C) 2006 Yoshinori Sato
+ *
+ * Hitachi SH7619 SolutionEngine Support.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+
+static int se7619_mode_pins(void)
+{
+	return MODE_PIN2 | MODE_PIN0;
+}
+
+/*
+ * The Machine Vector
+ */
+
+static struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_mode_pins		= se7619_mode_pins,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sh03/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-sh03/Makefile
new file mode 100644
index 0000000..400306a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sh03/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Interface (CTP/PCI-SH03) specific parts of the kernel
+#
+
+obj-y	 := setup.o rtc.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sh03/rtc.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-sh03/rtc.c
new file mode 100644
index 0000000..dc3d50e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sh03/rtc.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/sh03/rtc.c -- CTP/PCI-SH03 on-chip RTC support
+ *
+ *  Copyright (C) 2004  Saito.K & Jeanne(ksaito@interface.co.jp)
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <asm/rtc.h>
+
+#define RTC_BASE	0xb0000000
+#define RTC_SEC1	(RTC_BASE + 0)
+#define RTC_SEC10	(RTC_BASE + 1)
+#define RTC_MIN1	(RTC_BASE + 2)
+#define RTC_MIN10	(RTC_BASE + 3)
+#define RTC_HOU1	(RTC_BASE + 4)
+#define RTC_HOU10	(RTC_BASE + 5)
+#define RTC_WEE1	(RTC_BASE + 6)
+#define RTC_DAY1	(RTC_BASE + 7)
+#define RTC_DAY10	(RTC_BASE + 8)
+#define RTC_MON1	(RTC_BASE + 9)
+#define RTC_MON10	(RTC_BASE + 10)
+#define RTC_YEA1	(RTC_BASE + 11)
+#define RTC_YEA10	(RTC_BASE + 12)
+#define RTC_YEA100	(RTC_BASE + 13)
+#define RTC_YEA1000	(RTC_BASE + 14)
+#define RTC_CTL		(RTC_BASE + 15)
+#define RTC_BUSY	1
+#define RTC_STOP	2
+
+static DEFINE_SPINLOCK(sh03_rtc_lock);
+
+unsigned long get_cmos_time(void)
+{
+	unsigned int year, mon, day, hour, min, sec;
+
+	spin_lock(&sh03_rtc_lock);
+ again:
+	do {
+		sec  = (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10;
+		min  = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
+		hour = (__raw_readb(RTC_HOU1) & 0xf) + (__raw_readb(RTC_HOU10) & 0xf) * 10;
+		day  = (__raw_readb(RTC_DAY1) & 0xf) + (__raw_readb(RTC_DAY10) & 0xf) * 10;
+		mon  = (__raw_readb(RTC_MON1) & 0xf) + (__raw_readb(RTC_MON10) & 0xf) * 10;
+		year = (__raw_readb(RTC_YEA1) & 0xf) + (__raw_readb(RTC_YEA10) & 0xf) * 10
+		     + (__raw_readb(RTC_YEA100 ) & 0xf) * 100
+		     + (__raw_readb(RTC_YEA1000) & 0xf) * 1000;
+	} while (sec != (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10);
+	if (year == 0 || mon < 1 || mon > 12 || day > 31 || day < 1 ||
+	    hour > 23 || min > 59 || sec > 59) {
+		printk(KERN_ERR
+		       "SH-03 RTC: invalid value, resetting to 1 Jan 2000\n");
+		printk("year=%d, mon=%d, day=%d, hour=%d, min=%d, sec=%d\n",
+		       year, mon, day, hour, min, sec);
+
+		__raw_writeb(0, RTC_SEC1); __raw_writeb(0, RTC_SEC10);
+		__raw_writeb(0, RTC_MIN1); __raw_writeb(0, RTC_MIN10);
+		__raw_writeb(0, RTC_HOU1); __raw_writeb(0, RTC_HOU10);
+		__raw_writeb(6, RTC_WEE1);
+		__raw_writeb(1, RTC_DAY1); __raw_writeb(0, RTC_DAY10);
+		__raw_writeb(1, RTC_MON1); __raw_writeb(0, RTC_MON10);
+		__raw_writeb(0, RTC_YEA1); __raw_writeb(0, RTC_YEA10);
+		__raw_writeb(0, RTC_YEA100);
+		__raw_writeb(2, RTC_YEA1000);
+		__raw_writeb(0, RTC_CTL);
+		goto again;
+	}
+
+	spin_unlock(&sh03_rtc_lock);
+	return mktime(year, mon, day, hour, min, sec);
+}
+
+void sh03_rtc_gettimeofday(struct timespec *tv)
+{
+
+	tv->tv_sec = get_cmos_time();
+	tv->tv_nsec = 0;
+}
+
+static int set_rtc_mmss(unsigned long nowtime)
+{
+	int retval = 0;
+	int real_seconds, real_minutes, cmos_minutes;
+	int i;
+
+	/* gets recalled with irq locally disabled */
+	spin_lock(&sh03_rtc_lock);
+	for (i = 0 ; i < 1000000 ; i++)	/* may take up to 1 second... */
+		if (!(__raw_readb(RTC_CTL) & RTC_BUSY))
+			break;
+	cmos_minutes = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+		real_minutes += 30;		/* correct for half hour time zone */
+	real_minutes %= 60;
+
+	if (abs(real_minutes - cmos_minutes) < 30) {
+		__raw_writeb(real_seconds % 10, RTC_SEC1);
+		__raw_writeb(real_seconds / 10, RTC_SEC10);
+		__raw_writeb(real_minutes % 10, RTC_MIN1);
+		__raw_writeb(real_minutes / 10, RTC_MIN10);
+	} else {
+		printk_once(KERN_NOTICE
+		       "set_rtc_mmss: can't update from %d to %d\n",
+		       cmos_minutes, real_minutes);
+		retval = -1;
+	}
+	spin_unlock(&sh03_rtc_lock);
+
+	return retval;
+}
+
+int sh03_rtc_settimeofday(const time_t secs)
+{
+	unsigned long nowtime = secs;
+
+	return set_rtc_mmss(nowtime);
+}
+
+void sh03_time_init(void)
+{
+	rtc_sh_get_time = sh03_rtc_gettimeofday;
+	rtc_sh_set_time = sh03_rtc_settimeofday;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sh03/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-sh03/setup.c
new file mode 100644
index 0000000..85e7059
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sh03/setup.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/sh03/setup.c
+ *
+ * Copyright (C) 2004  Interface Co.,Ltd. Saito.K
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <asm/io.h>
+#include <asm/rtc.h>
+#include <mach-sh03/mach/io.h>
+#include <mach-sh03/mach/sh03.h>
+#include <asm/addrspace.h>
+
+static void __init init_sh03_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/* arch/sh/boards/sh03/rtc.c */
+void sh03_time_init(void);
+
+static void __init sh03_setup(char **cmdline_p)
+{
+	board_time_init = sh03_time_init;
+}
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = 0x1f0,
+		.end    = 0x1f0 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] = {
+		.start  = 0x1f0 + 0x206,
+		.end    = 0x1f0 +8 + 0x206 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = IRL2_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= 0xa0800000,
+		.end	= 0xa0800000,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *sh03_devices[] __initdata = {
+	&heartbeat_device,
+	&cf_ide_device,
+};
+
+static int __init sh03_devices_setup(void)
+{
+	pgprot_t prot;
+	unsigned long paddrbase;
+	void *cf_ide_base;
+
+	/* open I/O area window */
+	paddrbase = virt_to_phys((void *)PA_AREA5_IO);
+	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+	cf_ide_base = ioremap_prot(paddrbase, PAGE_SIZE, pgprot_val(prot));
+	if (!cf_ide_base) {
+		printk("allocate_cf_area : can't open CF I/O window!\n");
+		return -ENOMEM;
+	}
+
+	/* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
+	cf_ide_resources[0].start += (unsigned long)cf_ide_base;
+	cf_ide_resources[0].end   += (unsigned long)cf_ide_base;
+	cf_ide_resources[1].start += (unsigned long)cf_ide_base;
+	cf_ide_resources[1].end   += (unsigned long)cf_ide_base;
+
+	return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
+}
+device_initcall(sh03_devices_setup);
+
+static struct sh_machine_vector mv_sh03 __initmv = {
+	.mv_name		= "Interface (CTP/PCI-SH03)",
+	.mv_setup		= sh03_setup,
+	.mv_init_irq		= init_sh03_IRQ,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sh7763rdp/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-sh7763rdp/Makefile
new file mode 100644
index 0000000..f6c0b55
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sh7763rdp/Makefile
@@ -0,0 +1 @@
+obj-y    := setup.o irq.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sh7763rdp/irq.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-sh7763rdp/irq.c
new file mode 100644
index 0000000..add698c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sh7763rdp/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/irq.c
+ *
+ * Renesas Solutions SH7763RDP Support.
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008  Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <mach/sh7763rdp.h>
+
+#define INTC_BASE		(0xFFD00000)
+#define INTC_INT2PRI7   (INTC_BASE+0x4001C)
+#define INTC_INT2MSKCR	(INTC_BASE+0x4003C)
+#define INTC_INT2MSKCR1	(INTC_BASE+0x400D4)
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_sh7763rdp_IRQ(void)
+{
+	/* GPIO enabled */
+	__raw_writel(1 << 25, INTC_INT2MSKCR);
+
+	/* enable GPIO interrupts */
+	__raw_writel((__raw_readl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
+		  INTC_INT2PRI7);
+
+	/* USBH enabled */
+	__raw_writel(1 << 17, INTC_INT2MSKCR1);
+
+	/* GETHER enabled */
+	__raw_writel(1 << 16, INTC_INT2MSKCR1);
+
+	/* DMAC enabled */
+	__raw_writel(1 << 8, INTC_INT2MSKCR);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-sh7763rdp/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-sh7763rdp/setup.c
new file mode 100644
index 0000000..2c8fb04
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -0,0 +1,217 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/setup.c
+ *
+ * Renesas Solutions sh7763rdp board
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/sh_eth.h>
+#include <linux/sh_intc.h>
+#include <mach/sh7763rdp.h>
+#include <asm/sh7760fb.h>
+
+/* NOR Flash */
+static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
+	{
+		.name = "U-Boot",
+		.offset = 0,
+		.size = (2 * 128 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "Linux-Kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (20 * 128 * 1024),
+	}, {
+		.name = "Root Filesystem",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data sh7763rdp_nor_flash_data = {
+	.width = 2,
+	.parts = sh7763rdp_nor_flash_partitions,
+	.nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions),
+};
+
+static struct resource sh7763rdp_nor_flash_resources[] = {
+	[0] = {
+		.name = "NOR Flash",
+		.start = 0,
+		.end = (64 * 1024 * 1024),
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sh7763rdp_nor_flash_device = {
+	.name = "physmap-flash",
+	.resource = sh7763rdp_nor_flash_resources,
+	.num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources),
+	.dev = {
+		.platform_data = &sh7763rdp_nor_flash_data,
+	},
+};
+
+/*
+ * SH-Ether
+ *
+ * SH Ether of SH7763 has multi IRQ handling.
+ * (0x920,0x940,0x960 -> 0x920)
+ */
+static struct resource sh_eth_resources[] = {
+	{
+		.start  = 0xFEE00800,   /* use eth1 */
+		.end    = 0xFEE00F7C - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 0xFEE01800,   /* TSU */
+		.end    = 0xFEE01FFF,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = evt2irq(0x920),   /* irq number */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7763_eth_pdata = {
+	.phy = 1,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device sh7763rdp_eth_device = {
+	.name       = "sh7763-gether",
+	.resource   = sh_eth_resources,
+	.num_resources  = ARRAY_SIZE(sh_eth_resources),
+	.dev        = {
+		.platform_data = &sh7763_eth_pdata,
+	},
+};
+
+/* SH7763 LCDC */
+static struct resource sh7763rdp_fb_resources[] = {
+	{
+		.start  = 0xFFE80000,
+		.end    = 0xFFE80442 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct fb_videomode sh7763fb_videomode = {
+	.refresh = 60,
+	.name = "VGA Monitor",
+	.xres = 640,
+	.yres = 480,
+	.pixclock = 10000,
+	.left_margin = 80,
+	.right_margin = 24,
+	.upper_margin = 30,
+	.lower_margin = 1,
+	.hsync_len = 96,
+	.vsync_len = 1,
+	.sync = 0,
+	.vmode = FB_VMODE_NONINTERLACED,
+	.flag = FBINFO_FLAG_DEFAULT,
+};
+
+static struct sh7760fb_platdata sh7763fb_def_pdata = {
+	.def_mode = &sh7763fb_videomode,
+	.ldmtr = (LDMTR_TFT_COLOR_16|LDMTR_MCNT),
+	.lddfr = LDDFR_16BPP_RGB565,
+	.ldpmmr = 0x0000,
+	.ldpspr = 0xFFFF,
+	.ldaclnr = 0x0001,
+	.ldickr = 0x1102,
+	.rotate = 0,
+	.novsync = 0,
+	.blank = NULL,
+};
+
+static struct platform_device sh7763rdp_fb_device = {
+	.name		= "sh7760-lcdc",
+	.resource	= sh7763rdp_fb_resources,
+	.num_resources = ARRAY_SIZE(sh7763rdp_fb_resources),
+	.dev = {
+		.platform_data = &sh7763fb_def_pdata,
+	},
+};
+
+static struct platform_device *sh7763rdp_devices[] __initdata = {
+	&sh7763rdp_nor_flash_device,
+	&sh7763rdp_eth_device,
+	&sh7763rdp_fb_device,
+};
+
+static int __init sh7763rdp_devices_setup(void)
+{
+	return platform_add_devices(sh7763rdp_devices,
+				    ARRAY_SIZE(sh7763rdp_devices));
+}
+device_initcall(sh7763rdp_devices_setup);
+
+static void __init sh7763rdp_setup(char **cmdline_p)
+{
+	/* Board version check */
+	if (__raw_readw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
+		printk(KERN_INFO "RTE Standard Configuration\n");
+	else
+		printk(KERN_INFO "RTA Standard Configuration\n");
+
+	/* USB pin select bits (clear bit 5-2 to 0) */
+	__raw_writew((__raw_readw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
+	/* USBH setup port I controls to other (clear bits 4-9 to 0) */
+	__raw_writew(__raw_readw(PORT_PICR) & 0xFC0F, PORT_PICR);
+
+	/* Select USB Host controller */
+	__raw_writew(0x00, USB_USBHSC);
+
+	/* For LCD */
+	/* set PTJ7-1, bits 15-2 of PJCR to 0 */
+	__raw_writew(__raw_readw(PORT_PJCR) & 0x0003, PORT_PJCR);
+	/* set PTI5, bits 11-10 of PICR to 0 */
+	__raw_writew(__raw_readw(PORT_PICR) & 0xF3FF, PORT_PICR);
+	__raw_writew(0, PORT_PKCR);
+	__raw_writew(0, PORT_PLCR);
+	/* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
+	__raw_writew((__raw_readw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
+	/* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
+	__raw_writew((__raw_readw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
+
+	/* For HAC */
+	/* bit3-0  0100:HAC & SSI1 enable */
+	__raw_writew((__raw_readw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
+	/* bit14      1:SSI_HAC_CLK enable */
+	__raw_writew(__raw_readw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
+
+	/* SH-Ether */
+	__raw_writew((__raw_readw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
+	__raw_writew(0x0, PORT_PFCR);
+	__raw_writew(0x0, PORT_PFCR);
+	__raw_writew(0x0, PORT_PFCR);
+
+	/* MMC */
+	/*selects SCIF and MMC other functions */
+	__raw_writew(0x0001, PORT_PSEL0);
+	/* MMC clock operates */
+	__raw_writel(__raw_readl(MSTPCR1) & ~0x8, MSTPCR1);
+	__raw_writew(__raw_readw(PORT_PACR) & ~0x3000, PORT_PACR);
+	__raw_writew(__raw_readw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
+}
+
+static struct sh_machine_vector mv_sh7763rdp __initmv = {
+	.mv_name = "sh7763drp",
+	.mv_setup = sh7763rdp_setup,
+	.mv_init_irq = init_sh7763rdp_IRQ,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-x3proto/Makefile b/src/kernel/linux/v4.14/arch/sh/boards/mach-x3proto/Makefile
new file mode 100644
index 0000000..0cbe3d0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-x3proto/Makefile
@@ -0,0 +1,3 @@
+obj-y += setup.o ilsel.o
+
+obj-$(CONFIG_GPIOLIB)		+= gpio.o
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-x3proto/gpio.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-x3proto/gpio.c
new file mode 100644
index 0000000..cea88b0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-x3proto/gpio.c
@@ -0,0 +1,139 @@
+/*
+ * arch/sh/boards/mach-x3proto/gpio.c
+ *
+ * Renesas SH-X3 Prototype Baseboard GPIO Support.
+ *
+ * Copyright (C) 2010 - 2012  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/gpio/driver.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <mach/ilsel.h>
+#include <mach/hardware.h>
+
+#define KEYCTLR	0xb81c0000
+#define KEYOUTR	0xb81c0002
+#define KEYDETR 0xb81c0004
+
+static DEFINE_SPINLOCK(x3proto_gpio_lock);
+static struct irq_domain *x3proto_irq_domain;
+
+static int x3proto_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	unsigned long flags;
+	unsigned int data;
+
+	spin_lock_irqsave(&x3proto_gpio_lock, flags);
+	data = __raw_readw(KEYCTLR);
+	data |= (1 << gpio);
+	__raw_writew(data, KEYCTLR);
+	spin_unlock_irqrestore(&x3proto_gpio_lock, flags);
+
+	return 0;
+}
+
+static int x3proto_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+	return !!(__raw_readw(KEYDETR) & (1 << gpio));
+}
+
+static int x3proto_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+	int virq;
+
+	if (gpio < chip->ngpio)
+		virq = irq_create_mapping(x3proto_irq_domain, gpio);
+	else
+		virq = -ENXIO;
+
+	return virq;
+}
+
+static void x3proto_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct irq_data *data = irq_desc_get_irq_data(desc);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	unsigned long mask;
+	int pin;
+
+	chip->irq_mask_ack(data);
+
+	mask = __raw_readw(KEYDETR);
+	for_each_set_bit(pin, &mask, NR_BASEBOARD_GPIOS)
+		generic_handle_irq(irq_linear_revmap(x3proto_irq_domain, pin));
+
+	chip->irq_unmask(data);
+}
+
+struct gpio_chip x3proto_gpio_chip = {
+	.label			= "x3proto-gpio",
+	.direction_input	= x3proto_gpio_direction_input,
+	.get			= x3proto_gpio_get,
+	.to_irq			= x3proto_gpio_to_irq,
+	.base			= -1,
+	.ngpio			= NR_BASEBOARD_GPIOS,
+};
+
+static int x3proto_gpio_irq_map(struct irq_domain *domain, unsigned int virq,
+				irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler_name(virq, &dummy_irq_chip, handle_simple_irq,
+				      "gpio");
+
+	return 0;
+}
+
+static struct irq_domain_ops x3proto_gpio_irq_ops = {
+	.map	= x3proto_gpio_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+int __init x3proto_gpio_setup(void)
+{
+	int ilsel, ret;
+
+	ilsel = ilsel_enable(ILSEL_KEY);
+	if (unlikely(ilsel < 0))
+		return ilsel;
+
+	ret = gpiochip_add_data(&x3proto_gpio_chip, NULL);
+	if (unlikely(ret))
+		goto err_gpio;
+
+	x3proto_irq_domain = irq_domain_add_linear(NULL, NR_BASEBOARD_GPIOS,
+						   &x3proto_gpio_irq_ops, NULL);
+	if (unlikely(!x3proto_irq_domain))
+		goto err_irq;
+
+	pr_info("registering '%s' support, handling GPIOs %u -> %u, "
+		"bound to IRQ %u\n",
+		x3proto_gpio_chip.label, x3proto_gpio_chip.base,
+		x3proto_gpio_chip.base + x3proto_gpio_chip.ngpio,
+		ilsel);
+
+	irq_set_chained_handler(ilsel, x3proto_gpio_irq_handler);
+	irq_set_irq_wake(ilsel, 1);
+
+	return 0;
+
+err_irq:
+	gpiochip_remove(&x3proto_gpio_chip);
+	ret = 0;
+err_gpio:
+	synchronize_irq(ilsel);
+
+	ilsel_disable(ILSEL_KEY);
+
+	return ret;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-x3proto/ilsel.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-x3proto/ilsel.c
new file mode 100644
index 0000000..95e3461
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-x3proto/ilsel.c
@@ -0,0 +1,159 @@
+/*
+ * arch/sh/boards/mach-x3proto/ilsel.c
+ *
+ * Helper routines for SH-X3 proto board ILSEL.
+ *
+ * Copyright (C) 2007 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/bitmap.h>
+#include <linux/io.h>
+#include <mach/ilsel.h>
+
+/*
+ * ILSEL is split across:
+ *
+ *	ILSEL0 - 0xb8100004 [ Levels  1 -  4 ]
+ *	ILSEL1 - 0xb8100006 [ Levels  5 -  8 ]
+ *	ILSEL2 - 0xb8100008 [ Levels  9 - 12 ]
+ *	ILSEL3 - 0xb810000a [ Levels 13 - 15 ]
+ *
+ * With each level being relative to an ilsel_source_t.
+ */
+#define ILSEL_BASE	0xb8100004
+#define ILSEL_LEVELS	15
+
+/*
+ * ILSEL level map, in descending order from the highest level down.
+ *
+ * Supported levels are 1 - 15 spread across ILSEL0 - ILSEL4, mapping
+ * directly to IRLs. As the IRQs are numbered in reverse order relative
+ * to the interrupt level, the level map is carefully managed to ensure a
+ * 1:1 mapping between the bit position and the IRQ number.
+ *
+ * This careful constructions allows ilsel_enable*() to be referenced
+ * directly for hooking up an ILSEL set and getting back an IRQ which can
+ * subsequently be used for internal accounting in the (optional) disable
+ * path.
+ */
+static unsigned long ilsel_level_map;
+
+static inline unsigned int ilsel_offset(unsigned int bit)
+{
+	return ILSEL_LEVELS - bit - 1;
+}
+
+static inline unsigned long mk_ilsel_addr(unsigned int bit)
+{
+	return ILSEL_BASE + ((ilsel_offset(bit) >> 1) & ~0x1);
+}
+
+static inline unsigned int mk_ilsel_shift(unsigned int bit)
+{
+	return (ilsel_offset(bit) & 0x3) << 2;
+}
+
+static void __ilsel_enable(ilsel_source_t set, unsigned int bit)
+{
+	unsigned int tmp, shift;
+	unsigned long addr;
+
+	pr_notice("enabling ILSEL set %d\n", set);
+
+	addr = mk_ilsel_addr(bit);
+	shift = mk_ilsel_shift(bit);
+
+	pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n",
+		 __func__, bit, addr, shift, set);
+
+	tmp = __raw_readw(addr);
+	tmp &= ~(0xf << shift);
+	tmp |= set << shift;
+	__raw_writew(tmp, addr);
+}
+
+/**
+ * ilsel_enable - Enable an ILSEL set.
+ * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h).
+ *
+ * Enables a given non-aliased ILSEL source (<= ILSEL_KEY) at the highest
+ * available interrupt level. Callers should take care to order callsites
+ * noting descending interrupt levels. Aliasing FPGA and external board
+ * IRQs need to use ilsel_enable_fixed().
+ *
+ * The return value is an IRQ number that can later be taken down with
+ * ilsel_disable().
+ */
+int ilsel_enable(ilsel_source_t set)
+{
+	unsigned int bit;
+
+	if (unlikely(set > ILSEL_KEY)) {
+		pr_err("Aliased sources must use ilsel_enable_fixed()\n");
+		return -EINVAL;
+	}
+
+	do {
+		bit = find_first_zero_bit(&ilsel_level_map, ILSEL_LEVELS);
+	} while (test_and_set_bit(bit, &ilsel_level_map));
+
+	__ilsel_enable(set, bit);
+
+	return bit;
+}
+EXPORT_SYMBOL_GPL(ilsel_enable);
+
+/**
+ * ilsel_enable_fixed - Enable an ILSEL set at a fixed interrupt level
+ * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h).
+ * @level: Interrupt level (1 - 15)
+ *
+ * Enables a given ILSEL source at a fixed interrupt level. Necessary
+ * both for level reservation as well as for aliased sources that only
+ * exist on special ILSEL#s.
+ *
+ * Returns an IRQ number (as ilsel_enable()).
+ */
+int ilsel_enable_fixed(ilsel_source_t set, unsigned int level)
+{
+	unsigned int bit = ilsel_offset(level - 1);
+
+	if (test_and_set_bit(bit, &ilsel_level_map))
+		return -EBUSY;
+
+	__ilsel_enable(set, bit);
+
+	return bit;
+}
+EXPORT_SYMBOL_GPL(ilsel_enable_fixed);
+
+/**
+ * ilsel_disable - Disable an ILSEL set
+ * @irq: Bit position for ILSEL set value (retval from enable routines)
+ *
+ * Disable a previously enabled ILSEL set.
+ */
+void ilsel_disable(unsigned int irq)
+{
+	unsigned long addr;
+	unsigned int tmp;
+
+	pr_notice("disabling ILSEL set %d\n", irq);
+
+	addr = mk_ilsel_addr(irq);
+
+	tmp = __raw_readw(addr);
+	tmp &= ~(0xf << mk_ilsel_shift(irq));
+	__raw_writew(tmp, addr);
+
+	clear_bit(irq, &ilsel_level_map);
+}
+EXPORT_SYMBOL_GPL(ilsel_disable);
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/mach-x3proto/setup.c b/src/kernel/linux/v4.14/arch/sh/boards/mach-x3proto/setup.c
new file mode 100644
index 0000000..d682e2b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/mach-x3proto/setup.c
@@ -0,0 +1,273 @@
+/*
+ * arch/sh/boards/mach-x3proto/setup.c
+ *
+ * Renesas SH-X3 Prototype Board Support.
+ *
+ * Copyright (C) 2007 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/smc91x.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/usb/m66592.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <mach/ilsel.h>
+#include <mach/hardware.h>
+#include <asm/smp-ops.h>
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= 0xb8140020,
+		.end	= 0xb8140020,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start		= 0x18000300,
+		.end		= 0x18000300 + 0x10 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* Filled in by ilsel */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.resource	= smc91x_resources,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.dev	= {
+		.platform_data = &smc91x_info,
+	},
+};
+
+static struct r8a66597_platdata r8a66597_data = {
+	.xtal = R8A66597_PLATDATA_XTAL_12MHZ,
+	.vif = 1,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.start	= 0x18040000,
+		.end	= 0x18080000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* Filled in by ilsel */
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,		/* don't use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct m66592_platdata usbf_platdata = {
+	.xtal = M66592_PLATDATA_XTAL_24MHZ,
+	.vif = 1,
+};
+
+static struct resource m66592_usb_peripheral_resources[] = {
+	[0] = {
+		.name	= "m66592_udc",
+		.start	= 0x18080000,
+		.end	= 0x180c0000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "m66592_udc",
+		/* Filled in by ilsel */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m66592_usb_peripheral_device = {
+	.name		= "m66592_udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,		/* don't use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbf_platdata,
+	},
+	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
+	.resource	= m66592_usb_peripheral_resources,
+};
+
+static struct gpio_keys_button baseboard_buttons[NR_BASEBOARD_GPIOS] = {
+	{
+		.desc		= "key44",
+		.code		= KEY_POWER,
+		.active_low	= 1,
+		.wakeup		= 1,
+	}, {
+		.desc		= "key43",
+		.code		= KEY_SUSPEND,
+		.active_low	= 1,
+		.wakeup		= 1,
+	}, {
+		.desc		= "key42",
+		.code		= KEY_KATAKANAHIRAGANA,
+		.active_low	= 1,
+	}, {
+		.desc		= "key41",
+		.code		= KEY_SWITCHVIDEOMODE,
+		.active_low	= 1,
+	}, {
+		.desc		= "key34",
+		.code		= KEY_F12,
+		.active_low	= 1,
+	}, {
+		.desc		= "key33",
+		.code		= KEY_F11,
+		.active_low	= 1,
+	}, {
+		.desc		= "key32",
+		.code		= KEY_F10,
+		.active_low	= 1,
+	}, {
+		.desc		= "key31",
+		.code		= KEY_F9,
+		.active_low	= 1,
+	}, {
+		.desc		= "key24",
+		.code		= KEY_F8,
+		.active_low	= 1,
+	}, {
+		.desc		= "key23",
+		.code		= KEY_F7,
+		.active_low	= 1,
+	}, {
+		.desc		= "key22",
+		.code		= KEY_F6,
+		.active_low	= 1,
+	}, {
+		.desc		= "key21",
+		.code		= KEY_F5,
+		.active_low	= 1,
+	}, {
+		.desc		= "key14",
+		.code		= KEY_F4,
+		.active_low	= 1,
+	}, {
+		.desc		= "key13",
+		.code		= KEY_F3,
+		.active_low	= 1,
+	}, {
+		.desc		= "key12",
+		.code		= KEY_F2,
+		.active_low	= 1,
+	}, {
+		.desc		= "key11",
+		.code		= KEY_F1,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data baseboard_buttons_data = {
+	.buttons	= baseboard_buttons,
+	.nbuttons	= ARRAY_SIZE(baseboard_buttons),
+};
+
+static struct platform_device baseboard_buttons_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &baseboard_buttons_data,
+	},
+};
+
+static struct platform_device *x3proto_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_device,
+	&r8a66597_usb_host_device,
+	&m66592_usb_peripheral_device,
+	&baseboard_buttons_device,
+};
+
+static void __init x3proto_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRL3210);
+
+	/* Set ICR0.LVLMODE */
+	__raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
+}
+
+static int __init x3proto_devices_setup(void)
+{
+	int ret, i;
+
+	/*
+	 * IRLs are only needed for ILSEL mappings, so flip over the INTC
+	 * pins at a later point to enable the GPIOs to settle.
+	 */
+	x3proto_init_irq();
+
+	/*
+	 * Now that ILSELs are available, set up the baseboard GPIOs.
+	 */
+	ret = x3proto_gpio_setup();
+	if (unlikely(ret))
+		return ret;
+
+	/*
+	 * Propagate dynamic GPIOs for the baseboard button device.
+	 */
+	for (i = 0; i < ARRAY_SIZE(baseboard_buttons); i++)
+		baseboard_buttons[i].gpio = x3proto_gpio_chip.base + i;
+
+	r8a66597_usb_host_resources[1].start =
+		r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);
+
+	m66592_usb_peripheral_resources[1].start =
+		m66592_usb_peripheral_resources[1].end = ilsel_enable(ILSEL_USBP_I);
+
+	smc91x_resources[1].start =
+		smc91x_resources[1].end = ilsel_enable(ILSEL_LAN);
+
+	return platform_add_devices(x3proto_devices,
+				    ARRAY_SIZE(x3proto_devices));
+}
+device_initcall(x3proto_devices_setup);
+
+static void __init x3proto_setup(char **cmdline_p)
+{
+	register_smp_ops(&shx3_smp_ops);
+}
+
+static struct sh_machine_vector mv_x3proto __initmv = {
+	.mv_name		= "x3proto",
+	.mv_setup		= x3proto_setup,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boards/of-generic.c b/src/kernel/linux/v4.14/arch/sh/boards/of-generic.c
new file mode 100644
index 0000000..5e83ea1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boards/of-generic.c
@@ -0,0 +1,189 @@
+/*
+ * SH generic board support, using device tree
+ *
+ * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/clocksource.h>
+#include <linux/irqchip.h>
+#include <linux/clk-provider.h>
+#include <asm/machvec.h>
+#include <asm/rtc.h>
+
+#ifdef CONFIG_SMP
+
+static void dummy_smp_setup(void)
+{
+}
+
+static void dummy_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+static void dummy_start_cpu(unsigned int cpu, unsigned long entry_point)
+{
+}
+
+static unsigned int dummy_smp_processor_id(void)
+{
+	return 0;
+}
+
+static void dummy_send_ipi(unsigned int cpu, unsigned int message)
+{
+}
+
+static struct plat_smp_ops dummy_smp_ops = {
+	.smp_setup		= dummy_smp_setup,
+	.prepare_cpus		= dummy_prepare_cpus,
+	.start_cpu		= dummy_start_cpu,
+	.smp_processor_id	= dummy_smp_processor_id,
+	.send_ipi		= dummy_send_ipi,
+	.cpu_die		= native_cpu_die,
+	.cpu_disable		= native_cpu_disable,
+	.play_dead		= native_play_dead,
+};
+
+extern const struct of_cpu_method __cpu_method_of_table[];
+const struct of_cpu_method __cpu_method_of_table_sentinel
+	__section(__cpu_method_of_table_end);
+
+static void sh_of_smp_probe(void)
+{
+	struct device_node *np = 0;
+	const char *method = 0;
+	const struct of_cpu_method *m = __cpu_method_of_table;
+
+	pr_info("SH generic board support: scanning for cpus\n");
+
+	init_cpu_possible(cpumask_of(0));
+
+	while ((np = of_find_node_by_type(np, "cpu"))) {
+		const __be32 *cell = of_get_property(np, "reg", NULL);
+		u64 id = -1;
+		if (cell) id = of_read_number(cell, of_n_addr_cells(np));
+		if (id < NR_CPUS) {
+			if (!method)
+				of_property_read_string(np, "enable-method", &method);
+			set_cpu_possible(id, true);
+			set_cpu_present(id, true);
+			__cpu_number_map[id] = id;
+			__cpu_logical_map[id] = id;
+		}
+	}
+	if (!method) {
+		np = of_find_node_by_name(NULL, "cpus");
+		of_property_read_string(np, "enable-method", &method);
+	}
+
+	pr_info("CPU enable method: %s\n", method);
+	if (method)
+		for (; m->method; m++)
+			if (!strcmp(m->method, method)) {
+				register_smp_ops(m->ops);
+				return;
+			}
+
+	register_smp_ops(&dummy_smp_ops);
+}
+
+#else
+
+static void sh_of_smp_probe(void)
+{
+}
+
+#endif
+
+static void noop(void)
+{
+}
+
+static int noopi(void)
+{
+	return 0;
+}
+
+static void __init sh_of_mem_reserve(void)
+{
+	early_init_fdt_reserve_self();
+	early_init_fdt_scan_reserved_mem();
+}
+
+static void __init sh_of_time_init(void)
+{
+	pr_info("SH generic board support: scanning for clocksource devices\n");
+	timer_probe();
+}
+
+static void __init sh_of_setup(char **cmdline_p)
+{
+	struct device_node *root;
+
+#ifdef CONFIG_USE_BUILTIN_DTB
+	unflatten_and_copy_device_tree();
+#else
+	unflatten_device_tree();
+#endif
+
+	board_time_init = sh_of_time_init;
+
+	sh_mv.mv_name = "Unknown SH model";
+	root = of_find_node_by_path("/");
+	if (root) {
+		of_property_read_string(root, "model", &sh_mv.mv_name);
+		of_node_put(root);
+	}
+
+	sh_of_smp_probe();
+}
+
+static int sh_of_irq_demux(int irq)
+{
+	/* FIXME: eventually this should not be used at all;
+	 * the interrupt controller should set_handle_irq(). */
+	return irq;
+}
+
+static void __init sh_of_init_irq(void)
+{
+	pr_info("SH generic board support: scanning for interrupt controllers\n");
+	irqchip_init();
+}
+
+static int __init sh_of_clk_init(void)
+{
+#ifdef CONFIG_COMMON_CLK
+	/* Disabled pending move to COMMON_CLK framework. */
+	pr_info("SH generic board support: scanning for clk providers\n");
+	of_clk_init(NULL);
+#endif
+	return 0;
+}
+
+static struct sh_machine_vector __initmv sh_of_generic_mv = {
+	.mv_setup	= sh_of_setup,
+	.mv_name	= "devicetree", /* replaced by DT root's model */
+	.mv_irq_demux	= sh_of_irq_demux,
+	.mv_init_irq	= sh_of_init_irq,
+	.mv_clk_init	= sh_of_clk_init,
+	.mv_mode_pins	= noopi,
+	.mv_mem_init	= noop,
+	.mv_mem_reserve	= sh_of_mem_reserve,
+};
+
+struct sh_clk_ops;
+
+void __init __weak arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+}
+
+void __init __weak plat_irq_setup(void)
+{
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boot/.gitignore b/src/kernel/linux/v4.14/arch/sh/boot/.gitignore
new file mode 100644
index 0000000..541087d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boot/.gitignore
@@ -0,0 +1,3 @@
+zImage
+vmlinux*
+uImage*
diff --git a/src/kernel/linux/v4.14/arch/sh/boot/Makefile b/src/kernel/linux/v4.14/arch/sh/boot/Makefile
new file mode 100644
index 0000000..58592df
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boot/Makefile
@@ -0,0 +1,115 @@
+#
+# arch/sh/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1999 Stuart Menefy
+#
+
+#
+# Assign safe dummy values if these variables are not defined,
+# in order to suppress error message.
+#
+CONFIG_PAGE_OFFSET	?= 0x80000000
+CONFIG_MEMORY_START	?= 0x0c000000
+CONFIG_BOOT_LINK_OFFSET	?= 0x00800000
+CONFIG_ZERO_PAGE_OFFSET	?= 0x00001000
+CONFIG_ENTRY_OFFSET	?= 0x00001000
+CONFIG_PHYSICAL_START	?= $(CONFIG_MEMORY_START)
+
+suffix-y := bin
+suffix-$(CONFIG_KERNEL_GZIP)	:= gz
+suffix-$(CONFIG_KERNEL_BZIP2)	:= bz2
+suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
+suffix-$(CONFIG_KERNEL_XZ)	:= xz
+suffix-$(CONFIG_KERNEL_LZO)	:= lzo
+
+targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz \
+	   uImage.bz2 uImage.lzma uImage.xz uImage.lzo uImage.bin
+extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
+	   vmlinux.bin.xz vmlinux.bin.lzo
+subdir- := compressed romimage
+
+$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo '  Kernel: $@ is ready'
+
+$(obj)/compressed/vmlinux: FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
+
+$(obj)/romImage: $(obj)/romimage/vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo '  Kernel: $@ is ready'
+
+$(obj)/romimage/vmlinux: $(obj)/zImage FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/romimage $@
+
+KERNEL_MEMORY	:= $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_PHYSICAL_START) & 0x1fffffff]')
+
+KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_PAGE_OFFSET)  + \
+			$(KERNEL_MEMORY) + \
+			$(CONFIG_ZERO_PAGE_OFFSET)]')
+
+KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_PAGE_OFFSET)  + \
+			$(KERNEL_MEMORY) + \
+			$(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]')
+
+UIMAGE_LOADADDR = $(KERNEL_LOAD)
+UIMAGE_ENTRYADDR = $(KERNEL_ENTRY)
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,gzip)
+
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,bzip2)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzma)
+
+$(obj)/vmlinux.bin.xz: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,xzkern)
+
+$(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzo)
+
+$(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2
+	$(call if_changed,uimage,bzip2)
+
+$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz
+	$(call if_changed,uimage,gzip)
+
+$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma
+	$(call if_changed,uimage,lzma)
+
+$(obj)/uImage.xz: $(obj)/vmlinux.bin.xz
+	$(call if_changed,uimage,xz)
+
+$(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo
+	$(call if_changed,uimage,lzo)
+
+$(obj)/uImage.bin: $(obj)/vmlinux.bin
+	$(call if_changed,uimage,none)
+
+OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
+$(obj)/vmlinux.srec: $(obj)/compressed/vmlinux
+	$(call if_changed,objcopy)
+
+OBJCOPYFLAGS_uImage.srec := -I binary -O srec
+$(obj)/uImage.srec: $(obj)/uImage
+	$(call if_changed,objcopy)
+
+$(obj)/uImage: $(obj)/uImage.$(suffix-y)
+	@ln -sf $(notdir $<) $@
+	@echo '  Image $@ is ready'
+
+export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
+       CONFIG_PHYSICAL_START CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET \
+       KERNEL_MEMORY suffix-y
diff --git a/src/kernel/linux/v4.14/arch/sh/boot/compressed/.gitignore b/src/kernel/linux/v4.14/arch/sh/boot/compressed/.gitignore
new file mode 100644
index 0000000..2374a83
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boot/compressed/.gitignore
@@ -0,0 +1 @@
+vmlinux.bin.*
diff --git a/src/kernel/linux/v4.14/arch/sh/boot/compressed/Makefile b/src/kernel/linux/v4.14/arch/sh/boot/compressed/Makefile
new file mode 100644
index 0000000..f5e1bd7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boot/compressed/Makefile
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# linux/arch/sh/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
+		   vmlinux.bin.bz2 vmlinux.bin.lzma \
+		   vmlinux.bin.xz vmlinux.bin.lzo \
+		   head_$(BITS).o misc.o piggy.o
+
+OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o
+
+GCOV_PROFILE := n
+
+#
+# IMAGE_OFFSET is the load offset of the compression loader
+#
+ifeq ($(CONFIG_32BIT),y)
+IMAGE_OFFSET	:= $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_MEMORY_START)  + \
+			$(CONFIG_BOOT_LINK_OFFSET)]')
+else
+IMAGE_OFFSET	:= $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_PAGE_OFFSET)  + \
+			$(KERNEL_MEMORY) + \
+			$(CONFIG_BOOT_LINK_OFFSET)]')
+endif
+
+ifeq ($(CONFIG_MCOUNT),y)
+ORIG_CFLAGS := $(KBUILD_CFLAGS)
+KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
+endif
+
+LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \
+		   -T $(obj)/../../kernel/vmlinux.lds
+
+#
+# Pull in the necessary libgcc bits from the in-kernel implementation.
+#
+lib1funcs-$(CONFIG_SUPERH32)	:= ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S \
+				   lshrsi3.S
+lib1funcs-obj			:= \
+	$(addsuffix .o, $(basename $(addprefix $(obj)/, $(lib1funcs-y))))
+
+lib1funcs-dir		:= $(srctree)/arch/$(SRCARCH)/lib
+ifeq ($(BITS),64)
+	lib1funcs-dir 	:= $(addsuffix $(BITS), $(lib1funcs-dir))
+endif
+
+KBUILD_CFLAGS += -I$(lib1funcs-dir) -DDISABLE_BRANCH_PROFILING
+
+$(addprefix $(obj)/,$(lib1funcs-y)): $(obj)/%: $(lib1funcs-dir)/% FORCE
+	$(call cmd,shipped)
+
+$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(lib1funcs-obj) FORCE
+	$(call if_changed,ld)
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+vmlinux.bin.all-y := $(obj)/vmlinux.bin
+
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,gzip)
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,bzip2)
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,lzma)
+$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,xzkern)
+$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,lzo)
+
+OBJCOPYFLAGS += -R .empty_zero_page
+
+LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE
+	$(call if_changed,ld)
diff --git a/src/kernel/linux/v4.14/arch/sh/boot/compressed/cache.c b/src/kernel/linux/v4.14/arch/sh/boot/compressed/cache.c
new file mode 100644
index 0000000..31e04ff
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boot/compressed/cache.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+int cache_control(unsigned int command)
+{
+	volatile unsigned int *p = (volatile unsigned int *) 0x80000000;
+	int i;
+
+	for (i = 0; i < (32 * 1024); i += 32) {
+		(void)*p;
+		p += (32 / sizeof(int));
+	}
+
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boot/compressed/head_32.S b/src/kernel/linux/v4.14/arch/sh/boot/compressed/head_32.S
new file mode 100644
index 0000000..7bb1681
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boot/compressed/head_32.S
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  linux/arch/sh/boot/compressed/head.S
+ *
+ *  Copyright (C) 1999 Stuart Menefy
+ *  Copyright (C) 2003 SUGIOKA Toshinobu
+ */
+
+.text
+
+#include <asm/page.h>
+
+	.global	startup
+startup:
+	/* Load initial status register */
+	mov.l   init_sr, r1
+	ldc     r1, sr
+
+	/* Move myself to proper location if necessary */
+	mova	1f, r0
+	mov.l	1f, r2
+	cmp/eq	r2, r0
+	bt	clear_bss
+	sub	r0, r2
+	mov.l	bss_start_addr, r0
+	mov	#0xffffffe0, r1
+	and	r1, r0			! align cache line
+	mov.l	text_start_addr, r3
+	mov	r0, r1
+	sub	r2, r1
+3:
+	mov.l	@r1, r4
+	mov.l	@(4,r1), r5
+	mov.l	@(8,r1), r6
+	mov.l	@(12,r1), r7
+	mov.l	@(16,r1), r8
+	mov.l	@(20,r1), r9
+	mov.l	@(24,r1), r10
+	mov.l	@(28,r1), r11
+	mov.l	r4, @r0
+	mov.l	r5, @(4,r0)
+	mov.l	r6, @(8,r0)
+	mov.l	r7, @(12,r0)
+	mov.l	r8, @(16,r0)
+	mov.l	r9, @(20,r0)
+	mov.l	r10, @(24,r0)
+	mov.l	r11, @(28,r0)
+#ifdef CONFIG_CPU_SH4
+	ocbwb	@r0
+#endif
+	cmp/hi	r3, r0
+	add	#-32, r0
+	bt/s	3b
+	 add	#-32, r1
+	mov.l	2f, r0
+	jmp	@r0
+	 nop
+
+	.align 2
+1:	.long	1b
+2:	.long	clear_bss
+text_start_addr:
+	.long	startup
+
+	/* Clear BSS */
+clear_bss:
+	mov.l	end_addr, r1
+	mov.l	bss_start_addr, r2
+	mov	#0, r0
+l1:
+	mov.l	r0, @-r1
+	cmp/eq	r1,r2
+	bf	l1
+
+	/* Set the initial pointer. */
+	mov.l	init_stack_addr, r0
+	mov.l	@r0, r15
+
+	/* Decompress the kernel */
+	mov.l	decompress_kernel_addr, r0
+	jsr	@r0
+	nop
+
+	/* Jump to the start of the decompressed kernel */
+	mov.l	kernel_start_addr, r0
+	jmp	@r0
+	nop
+	
+	.align	2
+bss_start_addr:
+	.long	__bss_start
+end_addr:
+	.long	_end
+init_sr:
+	.long	0x500000F0	/* Privileged mode, Bank=0, Block=1, IMASK=0xF */
+kexec_magic:
+	.long	0x400000F0	/* magic used by kexec to parse zImage format */
+init_stack_addr:
+	.long	stack_start
+decompress_kernel_addr:
+	.long	decompress_kernel
+kernel_start_addr:
+#ifdef CONFIG_32BIT
+	.long	___pa(_text+PAGE_SIZE)
+#else
+	.long	_text+PAGE_SIZE
+#endif
+
+	.align	9
+fake_headers_as_bzImage:
+	.word	0
+	.ascii	"HdrS"		! header signature
+	.word	0x0202		! header version number (>= 0x0105)
+				! or else old loadlin-1.5 will fail)
+	.word	0		! default_switch
+	.word	0		! SETUPSEG
+	.word	0x1000
+	.word	0		! pointing to kernel version string
+	.byte	0		! = 0, old one (LILO, Loadlin,
+				! 0xTV: T=0 for LILO
+				!       V = version
+	.byte	1		! Load flags bzImage=1
+	.word	0x8000		! size to move, when setup is not
+	.long	0x100000	! 0x100000 = default for big kernel
+	.long	0		! address of loaded ramdisk image
+	.long	0		# its size in bytes
diff --git a/src/kernel/linux/v4.14/arch/sh/boot/compressed/head_64.S b/src/kernel/linux/v4.14/arch/sh/boot/compressed/head_64.S
new file mode 100644
index 0000000..9993113
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boot/compressed/head_64.S
@@ -0,0 +1,159 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/shmedia/boot/compressed/head.S
+ *
+ * Copied from
+ *   arch/shmedia/kernel/head.S
+ * which carried the copyright:
+ *   Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ * Modification for compressed loader:
+ *   Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
+ */
+#include <asm/cache.h>
+#include <asm/tlb.h>
+#include <cpu/mmu_context.h>
+#include <cpu/registers.h>
+
+/*
+ * Fixed TLB entries to identity map the beginning of RAM
+ */
+#define MMUIR_TEXT_H	0x0000000000000003 | CONFIG_MEMORY_START
+			/* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
+#define MMUIR_TEXT_L	0x000000000000009a | CONFIG_MEMORY_START
+			/* 512 Mb, Cacheable (Write-back), execute, Not User, Ph. Add. */
+
+#define MMUDR_CACHED_H	0x0000000000000003 | CONFIG_MEMORY_START
+			/* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
+#define MMUDR_CACHED_L	0x000000000000015a | CONFIG_MEMORY_START
+			/* 512 Mb, Cacheable (Write-back), read/write, Not User, Ph. Add. */
+
+#define	ICCR0_INIT_VAL	ICCR0_ON | ICCR0_ICI		/* ICE + ICI */
+#define	ICCR1_INIT_VAL	ICCR1_NOLOCK			/* No locking */
+
+#define	OCCR0_INIT_VAL	OCCR0_ON | OCCR0_OCI | OCCR0_WB	/* OCE + OCI + WB */
+#define	OCCR1_INIT_VAL	OCCR1_NOLOCK			/* No locking */
+
+	.text
+
+	.global	startup
+startup:
+	/*
+	 * Prevent speculative fetch on device memory due to
+	 * uninitialized target registers.
+	 * This must be executed before the first branch.
+	 */
+	ptabs/u	r63, tr0
+	ptabs/u	r63, tr1
+	ptabs/u	r63, tr2
+	ptabs/u	r63, tr3
+	ptabs/u	r63, tr4
+	ptabs/u	r63, tr5
+	ptabs/u	r63, tr6
+	ptabs/u	r63, tr7
+	synci
+
+	/*
+	 * Set initial TLB entries for cached and uncached regions.
+	 * Note: PTA/BLINK is PIC code, PTABS/BLINK isn't !
+	 */
+	/* Clear ITLBs */
+	pta	1f, tr1
+	movi	ITLB_FIXED, r21
+	movi	ITLB_LAST_VAR_UNRESTRICTED+TLB_STEP, r22
+1:	putcfg	r21, 0, r63		/* Clear MMUIR[n].PTEH.V */
+	addi	r21, TLB_STEP, r21
+        bne	r21, r22, tr1
+
+	/* Clear DTLBs */
+	pta	1f, tr1
+	movi	DTLB_FIXED, r21
+	movi	DTLB_LAST_VAR_UNRESTRICTED+TLB_STEP, r22
+1:	putcfg	r21, 0, r63		/* Clear MMUDR[n].PTEH.V */
+	addi	r21, TLB_STEP, r21
+        bne	r21, r22, tr1
+
+	/* Map one big (512Mb) page for ITLB */
+	movi	ITLB_FIXED, r21
+	movi	MMUIR_TEXT_L, r22	/* PTEL first */
+	putcfg	r21, 1, r22		/* Set MMUIR[0].PTEL */
+	movi	MMUIR_TEXT_H, r22	/* PTEH last */
+	putcfg	r21, 0, r22		/* Set MMUIR[0].PTEH */
+
+	/* Map one big CACHED (512Mb) page for DTLB */
+	movi	DTLB_FIXED, r21
+	movi	MMUDR_CACHED_L, r22	/* PTEL first */
+	putcfg	r21, 1, r22		/* Set MMUDR[0].PTEL */
+	movi	MMUDR_CACHED_H, r22	/* PTEH last */
+	putcfg	r21, 0, r22		/* Set MMUDR[0].PTEH */
+
+	/* ICache */
+	movi	ICCR_BASE, r21
+	movi	ICCR0_INIT_VAL, r22
+	movi	ICCR1_INIT_VAL, r23
+	putcfg	r21, ICCR_REG0, r22
+	putcfg	r21, ICCR_REG1, r23
+	synci
+
+	/* OCache */
+	movi	OCCR_BASE, r21
+	movi	OCCR0_INIT_VAL, r22
+	movi	OCCR1_INIT_VAL, r23
+	putcfg	r21, OCCR_REG0, r22
+	putcfg	r21, OCCR_REG1, r23
+	synco
+
+	/*
+	 * Enable the MMU.
+	 * From here-on code can be non-PIC.
+	 */
+	movi	SR_HARMLESS | SR_ENABLE_MMU, r22
+	putcon	r22, SSR
+	movi	1f, r22
+	putcon	r22, SPC
+	synco
+	rte				/* And now go into the hyperspace ... */
+1:					/* ... that's the next instruction ! */
+
+	/* Set initial stack pointer */
+	movi	datalabel stack_start, r0
+	ld.l	r0, 0, r15
+
+	/*
+	 * Clear bss
+	 */
+	pt	1f, tr1
+	movi	datalabel __bss_start, r22
+	movi	datalabel _end, r23
+1:	st.l	r22, 0, r63
+	addi	r22, 4, r22
+	bne	r22, r23, tr1
+
+	/*
+	 * Decompress the kernel.
+	 */
+	pt	decompress_kernel, tr0
+	blink	tr0, r18
+
+	/*
+	 * Disable the MMU.
+	 */
+	movi	SR_HARMLESS, r22
+	putcon	r22, SSR
+	movi	1f, r22
+	putcon	r22, SPC
+	synco
+	rte				/* And now go into the hyperspace ... */
+1:					/* ... that's the next instruction ! */
+
+	/* Jump into the decompressed kernel */
+	movi	datalabel (CONFIG_MEMORY_START + 0x2000)+1, r19
+	ptabs	r19, tr0
+	blink	tr0, r18
+
+	/* Shouldn't return here, but just in case, loop forever */
+	pt	1f, tr0
+1:	blink	tr0, r63
diff --git a/src/kernel/linux/v4.14/arch/sh/boot/compressed/install.sh b/src/kernel/linux/v4.14/arch/sh/boot/compressed/install.sh
new file mode 100644
index 0000000..f9f4181
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boot/compressed/install.sh
@@ -0,0 +1,56 @@
+#!/bin/sh
+#
+# arch/sh/boot/install.sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Adapted from code in arch/i386/boot/install.sh by Russell King
+# Adapted from code in arch/arm/boot/install.sh by Stuart Menefy
+#
+# "make install" script for sh architecture
+#
+# Arguments:
+#   $1 - kernel version
+#   $2 - kernel image file
+#   $3 - kernel map file
+#   $4 - default install path (blank if root directory)
+#
+
+# User may have a custom install script
+
+if [ -x /sbin/${INSTALLKERNEL} ]; then
+  exec /sbin/${INSTALLKERNEL} "$@"
+fi
+
+if [ "$2" = "zImage" ]; then
+# Compressed install
+  echo "Installing compressed kernel"
+  if [ -f $4/vmlinuz-$1 ]; then
+    mv $4/vmlinuz-$1 $4/vmlinuz.old
+  fi
+
+  if [ -f $4/System.map-$1 ]; then
+    mv $4/System.map-$1 $4/System.old
+  fi
+
+  cat $2 > $4/vmlinuz-$1
+  cp $3 $4/System.map-$1
+else
+# Normal install
+  echo "Installing normal kernel"
+  if [ -f $4/vmlinux-$1 ]; then
+    mv $4/vmlinux-$1 $4/vmlinux.old
+  fi
+
+  if [ -f $4/System.map ]; then
+    mv $4/System.map $4/System.old
+  fi
+
+  cat $2 > $4/vmlinux-$1
+  cp $3 $4/System.map
+fi
diff --git a/src/kernel/linux/v4.14/arch/sh/boot/compressed/misc.c b/src/kernel/linux/v4.14/arch/sh/boot/compressed/misc.c
new file mode 100644
index 0000000..f2d9d30
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boot/compressed/misc.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/boot/compressed/misc.c
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ *
+ * Adapted for SH by Stuart Menefy, Aug 1999
+ *
+ * Modified to use standard LinuxSH BIOS by Greg Banks 7Jul2000
+ */
+
+#include <linux/uaccess.h>
+#include <asm/addrspace.h>
+#include <asm/page.h>
+
+/*
+ * gzip declarations
+ */
+
+#define STATIC static
+
+#undef memset
+#undef memcpy
+#define memzero(s, n)     memset ((s), 0, (n))
+
+/* cache.c */
+#define CACHE_ENABLE      0
+#define CACHE_DISABLE     1
+int cache_control(unsigned int command);
+
+extern char input_data[];
+extern int input_len;
+static unsigned char *output;
+
+static void error(char *m);
+
+int puts(const char *);
+
+extern int _text;		/* Defined in vmlinux.lds.S */
+extern int _end;
+static unsigned long free_mem_ptr;
+static unsigned long free_mem_end_ptr;
+
+#ifdef CONFIG_HAVE_KERNEL_BZIP2
+#define HEAP_SIZE	0x400000
+#else
+#define HEAP_SIZE	0x10000
+#endif
+
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_BZIP2
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
+#ifdef CONFIG_KERNEL_XZ
+#include "../../../../lib/decompress_unxz.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
+
+int puts(const char *s)
+{
+	/* This should be updated to use the sh-sci routines */
+	return 0;
+}
+
+void* memset(void* s, int c, size_t n)
+{
+	int i;
+	char *ss = (char*)s;
+
+	for (i=0;i<n;i++) ss[i] = c;
+	return s;
+}
+
+void* memcpy(void* __dest, __const void* __src,
+			    size_t __n)
+{
+	int i;
+	char *d = (char *)__dest, *s = (char *)__src;
+
+	for (i=0;i<__n;i++) d[i] = s[i];
+	return __dest;
+}
+
+static void error(char *x)
+{
+	puts("\n\n");
+	puts(x);
+	puts("\n\n -- System halted");
+
+	while(1);	/* Halt */
+}
+
+#ifdef CONFIG_SUPERH64
+#define stackalign	8
+#else
+#define stackalign	4
+#endif
+
+#define STACK_SIZE (4096)
+long __attribute__ ((aligned(stackalign))) user_stack[STACK_SIZE];
+long *stack_start = &user_stack[STACK_SIZE];
+
+void decompress_kernel(void)
+{
+	unsigned long output_addr;
+
+#ifdef CONFIG_SUPERH64
+	output_addr = (CONFIG_MEMORY_START + 0x2000);
+#else
+	output_addr = __pa((unsigned long)&_text+PAGE_SIZE);
+#if defined(CONFIG_29BIT)
+	output_addr |= P2SEG;
+#endif
+#endif
+
+	output = (unsigned char *)output_addr;
+	free_mem_ptr = (unsigned long)&_end;
+	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
+
+	puts("Uncompressing Linux... ");
+	cache_control(CACHE_ENABLE);
+	__decompress(input_data, input_len, NULL, NULL, output, 0, NULL, error);
+	cache_control(CACHE_DISABLE);
+	puts("Ok, booting the kernel.\n");
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/boot/dts/Makefile b/src/kernel/linux/v4.14/arch/sh/boot/dts/Makefile
new file mode 100644
index 0000000..e5ce3a0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boot/dts/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_USE_BUILTIN_DTB) += $(patsubst "%",%,$(CONFIG_BUILTIN_DTB_SOURCE)).dtb.o
+
+clean-files := *.dtb.S
diff --git a/src/kernel/linux/v4.14/arch/sh/boot/dts/j2_mimas_v2.dts b/src/kernel/linux/v4.14/arch/sh/boot/dts/j2_mimas_v2.dts
new file mode 100644
index 0000000..9f4742f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boot/dts/j2_mimas_v2.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/ {
+	compatible = "jcore,j2-soc";
+	model = "J2 FPGA SoC on Mimas v2 board";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&aic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "jcore,j2";
+			reg = <0>;
+			clock-frequency = <50000000>;
+			d-cache-size = <8192>;
+			i-cache-size = <8192>;
+			d-cache-block-size = <16>;
+			i-cache-block-size = <16>;
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x4000000>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc@abcd0000 {
+		compatible = "simple-bus";
+		ranges = <0 0xabcd0000 0x100000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		aic: interrupt-controller@200 {
+			compatible = "jcore,aic1";
+			reg = <0x200 0x10>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		cache-controller@c0 {
+			compatible = "jcore,cache";
+			reg = <0xc0 4>;
+		};
+
+		timer@200 {
+			compatible = "jcore,pit";
+			reg = <0x200 0x30>;
+			interrupts = <0x48>;
+		};
+
+		spi0: spi@40 {
+			compatible = "jcore,spi2";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			spi-max-frequency = <25000000>;
+
+			reg = <0x40 0x8>;
+
+			sdcard@0 {
+				compatible = "mmc-spi-slot";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+				voltage-ranges = <3200 3400>;
+				mode = <0>;
+			};
+		};
+
+		uart0: serial@100 {
+			clock-frequency = <125000000>;
+			compatible = "xlnx,xps-uartlite-1.00.a";
+			current-speed = <19200>;
+			device_type = "serial";
+			interrupts = <0x12>;
+			port-number = <0>;
+			reg = <0x100 0x10>;
+		};
+	};
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/boot/romimage/Makefile b/src/kernel/linux/v4.14/arch/sh/boot/romimage/Makefile
new file mode 100644
index 0000000..c7c8be5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boot/romimage/Makefile
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# linux/arch/sh/boot/romimage/Makefile
+#
+# create an romImage file suitable for burning to flash/mmc from zImage
+#
+
+targets		:= vmlinux head.o zeropage.bin piggy.o
+load-y		:= 0
+
+mmcif-load-$(CONFIG_CPU_SUBTYPE_SH7724)	:= 0xe5200000 # ILRAM
+mmcif-obj-$(CONFIG_CPU_SUBTYPE_SH7724)	:= $(obj)/mmcif-sh7724.o
+load-$(CONFIG_ROMIMAGE_MMCIF)		:= $(mmcif-load-y)
+obj-$(CONFIG_ROMIMAGE_MMCIF)		:= $(mmcif-obj-y)
+
+LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(load-y) -e romstart \
+		   -T $(obj)/../../kernel/vmlinux.lds
+
+$(obj)/vmlinux: $(obj)/head.o $(obj-y) $(obj)/piggy.o FORCE
+	$(call if_changed,ld)
+
+OBJCOPYFLAGS += -j .empty_zero_page
+
+$(obj)/zeropage.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/zeropage.bin arch/sh/boot/zImage FORCE
+	$(call if_changed,ld)
diff --git a/src/kernel/linux/v4.14/arch/sh/boot/romimage/head.S b/src/kernel/linux/v4.14/arch/sh/boot/romimage/head.S
new file mode 100644
index 0000000..81a0652
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boot/romimage/head.S
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  linux/arch/sh/boot/romimage/head.S
+ *
+ * Board specific setup code, executed before zImage loader
+ */
+
+.text
+	#include <asm/page.h>
+
+	.global	romstart
+romstart:
+	/* include board specific setup code */
+#include <mach/romimage.h>
+
+#ifdef CONFIG_ROMIMAGE_MMCIF
+	/* load the romImage to above the empty zero page */
+	mov.l	empty_zero_page_dst, r4
+	mov.l	empty_zero_page_dst_adj, r5
+	add	r5, r4
+	mov.l	bytes_to_load, r5
+	mov.l	loader_function, r7
+	jsr	@r7
+	 mov	r4, r15
+
+	mov.l	empty_zero_page_dst, r4
+	mov.l	empty_zero_page_dst_adj, r5
+	add	r5, r4
+	mov.l	loaded_code_offs, r5
+	add	r5, r4
+	jmp	@r4
+	 nop
+
+	.balign 4
+empty_zero_page_dst_adj:
+	.long	PAGE_SIZE
+bytes_to_load:
+	.long	end_data - romstart
+loader_function:
+	.long	mmcif_loader
+loaded_code_offs:
+	.long	loaded_code - romstart
+loaded_code:
+#endif /* CONFIG_ROMIMAGE_MMCIF */
+
+	/* copy the empty_zero_page contents to where vmlinux expects it */
+	mova	extra_data_pos, r0
+	mov.l	extra_data_size, r1
+	add	r1, r0
+	mov.l	empty_zero_page_dst, r1
+	mov	#(PAGE_SHIFT - 4), r4
+	mov	#1, r3
+	shld	r4, r3 /* r3 = PAGE_SIZE / 16 */
+
+1:
+	mov.l	@r0, r4
+	mov.l	@(4, r0), r5
+	mov.l	@(8, r0), r6
+	mov.l	@(12, r0), r7
+	add	#16,r0
+	mov.l	r4, @r1
+	mov.l	r5, @(4, r1)
+	mov.l	r6, @(8, r1)
+	mov.l	r7, @(12, r1)
+	dt	r3
+	add	#16,r1
+	bf	1b
+
+	/* jump to the zImage entry point located after the zero page data */
+	mov	#PAGE_SHIFT, r4
+	mov	#1, r1
+	shld	r4, r1
+	mova	extra_data_pos, r0
+	add	r1, r0
+	mov.l	extra_data_size, r1
+	add	r1, r0
+	jmp	@r0
+	 nop
+
+	.align 2
+empty_zero_page_dst:
+	.long	_text
+extra_data_pos:
+extra_data_size:
+	.long	zero_page_pos - extra_data_pos
diff --git a/src/kernel/linux/v4.14/arch/sh/boot/romimage/mmcif-sh7724.c b/src/kernel/linux/v4.14/arch/sh/boot/romimage/mmcif-sh7724.c
new file mode 100644
index 0000000..6595b6b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/boot/romimage/mmcif-sh7724.c
@@ -0,0 +1,78 @@
+/*
+ * sh7724 MMCIF loader
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mmc/sh_mmcif.h>
+#include <mach/romimage.h>
+
+#define MMCIF_BASE      (void __iomem *)0xa4ca0000
+
+#define MSTPCR2		0xa4150038
+#define PTWCR		0xa4050146
+#define PTXCR		0xa4050148
+#define PSELA		0xa405014e
+#define PSELE		0xa4050156
+#define HIZCRC		0xa405015c
+#define DRVCRA		0xa405018a
+
+enum {
+	MMCIF_PROGRESS_ENTER,
+	MMCIF_PROGRESS_INIT,
+	MMCIF_PROGRESS_LOAD,
+	MMCIF_PROGRESS_DONE
+};
+
+/* SH7724 specific MMCIF loader
+ *
+ * loads the romImage from an MMC card starting from block 512
+ * use the following line to write the romImage to an MMC card
+ * # dd if=arch/sh/boot/romImage of=/dev/sdx bs=512 seek=512
+ */
+asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes)
+{
+	mmcif_update_progress(MMCIF_PROGRESS_ENTER);
+
+	/* enable clock to the MMCIF hardware block */
+	__raw_writel(__raw_readl(MSTPCR2) & ~0x20000000, MSTPCR2);
+
+	/* setup pins D7-D0 */
+	__raw_writew(0x0000, PTWCR);
+
+	/* setup pins MMC_CLK, MMC_CMD */
+	__raw_writew(__raw_readw(PTXCR) & ~0x000f, PTXCR);
+
+	/* select D3-D0 pin function */
+	__raw_writew(__raw_readw(PSELA) & ~0x2000, PSELA);
+
+	/* select D7-D4 pin function */
+	__raw_writew(__raw_readw(PSELE) & ~0x3000, PSELE);
+
+	/* disable Hi-Z for the MMC pins */
+	__raw_writew(__raw_readw(HIZCRC) & ~0x0620, HIZCRC);
+
+	/* high drive capability for MMC pins */
+	__raw_writew(__raw_readw(DRVCRA) | 0x3000, DRVCRA);
+
+	mmcif_update_progress(MMCIF_PROGRESS_INIT);
+
+	/* setup MMCIF hardware */
+	sh_mmcif_boot_init(MMCIF_BASE);
+
+	mmcif_update_progress(MMCIF_PROGRESS_LOAD);
+
+	/* load kernel via MMCIF interface */
+	sh_mmcif_boot_do_read(MMCIF_BASE, 512,
+	                      (no_bytes + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS,
+			      buf);
+
+	/* disable clock to the MMCIF hardware block */
+	__raw_writel(__raw_readl(MSTPCR2) | 0x20000000, MSTPCR2);
+
+	mmcif_update_progress(MMCIF_PROGRESS_DONE);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/cchips/Kconfig b/src/kernel/linux/v4.14/arch/sh/cchips/Kconfig
new file mode 100644
index 0000000..6be5dde
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/cchips/Kconfig
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0
+menu "Companion Chips"
+
+config HD6446X_SERIES
+	bool
+
+choice
+	prompt "HD6446x options"
+	depends on HD6446X_SERIES
+	default HD64461
+
+config HD64461
+	bool "Hitachi HD64461 companion chip support"
+	---help---
+	  The Hitachi HD64461 provides an interface for
+	  the SH7709 CPU, supporting a LCD controller,
+	  CRT color controller, IrDA up to 4 Mbps, and a
+	  PCMCIA controller supporting 2 slots.
+
+	  More information is available at
+	  <http://semiconductor.hitachi.com/windowsce/superh/sld013.htm>.
+
+	  Say Y if you want support for the HD64461.
+	  Otherwise, say N.
+
+endchoice
+
+# These will also be split into the Kconfig's below
+config HD64461_IRQ
+	int "HD64461 IRQ"
+	depends on HD64461
+	default "36"
+	help
+	  The default setting of the HD64461 IRQ is 36.
+
+	  Do not change this unless you know what you are doing.
+
+config HD64461_ENABLER
+	bool "HD64461 PCMCIA enabler"
+	depends on HD64461
+	help
+	  Say Y here if you want to enable PCMCIA support
+	  via the HD64461 companion chip.
+	  Otherwise, say N.
+
+endmenu
diff --git a/src/kernel/linux/v4.14/arch/sh/cchips/hd6446x/Makefile b/src/kernel/linux/v4.14/arch/sh/cchips/hd6446x/Makefile
new file mode 100644
index 0000000..59c3483
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/cchips/hd6446x/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_HD64461)	+= hd64461.o
+
+ccflags-y := -Werror
diff --git a/src/kernel/linux/v4.14/arch/sh/cchips/hd6446x/hd64461.c b/src/kernel/linux/v4.14/arch/sh/cchips/hd6446x/hd64461.c
new file mode 100644
index 0000000..f3fba96
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/cchips/hd6446x/hd64461.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	Copyright (C) 2000 YAEGASHI Takeshi
+ *	Hitachi HD64461 companion chip support
+ */
+
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/hd64461.h>
+
+/* This belongs in cpu specific */
+#define INTC_ICR1 0xA4140010UL
+
+static void hd64461_mask_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned short nimr;
+	unsigned short mask = 1 << (irq - HD64461_IRQBASE);
+
+	nimr = __raw_readw(HD64461_NIMR);
+	nimr |= mask;
+	__raw_writew(nimr, HD64461_NIMR);
+}
+
+static void hd64461_unmask_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned short nimr;
+	unsigned short mask = 1 << (irq - HD64461_IRQBASE);
+
+	nimr = __raw_readw(HD64461_NIMR);
+	nimr &= ~mask;
+	__raw_writew(nimr, HD64461_NIMR);
+}
+
+static void hd64461_mask_and_ack_irq(struct irq_data *data)
+{
+	hd64461_mask_irq(data);
+
+#ifdef CONFIG_HD64461_ENABLER
+	if (data->irq == HD64461_IRQBASE + 13)
+		__raw_writeb(0x00, HD64461_PCC1CSCR);
+#endif
+}
+
+static struct irq_chip hd64461_irq_chip = {
+	.name		= "HD64461-IRQ",
+	.irq_mask	= hd64461_mask_irq,
+	.irq_mask_ack	= hd64461_mask_and_ack_irq,
+	.irq_unmask	= hd64461_unmask_irq,
+};
+
+static void hd64461_irq_demux(struct irq_desc *desc)
+{
+	unsigned short intv = __raw_readw(HD64461_NIRR);
+	unsigned int ext_irq = HD64461_IRQBASE;
+
+	intv &= (1 << HD64461_IRQ_NUM) - 1;
+
+	for (; intv; intv >>= 1, ext_irq++) {
+		if (!(intv & 1))
+			continue;
+
+		generic_handle_irq(ext_irq);
+	}
+}
+
+int __init setup_hd64461(void)
+{
+	int irq_base, i;
+
+	printk(KERN_INFO
+	       "HD64461 configured at 0x%x on irq %d(mapped into %d to %d)\n",
+	       HD64461_IOBASE, CONFIG_HD64461_IRQ, HD64461_IRQBASE,
+	       HD64461_IRQBASE + 15);
+
+/* Should be at processor specific part.. */
+#if defined(CONFIG_CPU_SUBTYPE_SH7709)
+	__raw_writew(0x2240, INTC_ICR1);
+#endif
+	__raw_writew(0xffff, HD64461_NIMR);
+
+	irq_base = irq_alloc_descs(HD64461_IRQBASE, HD64461_IRQBASE, 16, -1);
+	if (IS_ERR_VALUE(irq_base)) {
+		pr_err("%s: failed hooking irqs for HD64461\n", __func__);
+		return irq_base;
+	}
+
+	for (i = 0; i < 16; i++)
+		irq_set_chip_and_handler(irq_base + i, &hd64461_irq_chip,
+					 handle_level_irq);
+
+	irq_set_chained_handler(CONFIG_HD64461_IRQ, hd64461_irq_demux);
+	irq_set_irq_type(CONFIG_HD64461_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+#ifdef CONFIG_HD64461_ENABLER
+	printk(KERN_INFO "HD64461: enabling PCMCIA devices\n");
+	__raw_writeb(0x4c, HD64461_PCC1CSCIER);
+	__raw_writeb(0x00, HD64461_PCC1CSCR);
+#endif
+
+	return 0;
+}
+
+module_init(setup_hd64461);
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/ap325rxa_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/ap325rxa_defconfig
new file mode 100644
index 0000000..72b72e5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/ap325rxa_defconfig
@@ -0,0 +1,108 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_KALLSYMS is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7723=y
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_AP325RXA=y
+# CONFIG_SH_TIMER_CMT is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SECCOMP=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_SH_FLCTL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_SH_MOBILE=y
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
+# CONFIG_HWMON is not set
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_PLATFORM=y
+CONFIG_SOC_CAMERA_OV772X=y
+CONFIG_VIDEO_SH_MOBILE_CEU=y
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_T10DIF=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/apsh4a3a_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/apsh4a3a_defconfig
new file mode 100644
index 0000000..4710df4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/apsh4a3a_defconfig
@@ -0,0 +1,93 @@
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+CONFIG_MEMORY_START=0x0C000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SH_APSH4A3A=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_KEXEC=y
+CONFIG_PREEMPT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_SH7785FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/apsh4ad0a_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/apsh4ad0a_defconfig
new file mode 100644
index 0000000..825c641
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/apsh4ad0a_defconfig
@@ -0,0 +1,123 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_RCU_TRACE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_MEMCG=y
+CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_CPU_SUBTYPE_SH7786=y
+CONFIG_MEMORY_SIZE=0x10000000
+CONFIG_HUGETLB_PAGE_SIZE_1MB=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_KSM=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SH_APSH4AD0A=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_SH_CPU_FREQ=y
+CONFIG_KEXEC=y
+CONFIG_SECCOMP=y
+CONFIG_PREEMPT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM=y
+CONFIG_CPU_IDLE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_SH7785FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_VM=y
+CONFIG_DWARF_UNWINDER=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/cayman_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/cayman_defconfig
new file mode 100644
index 0000000..5a90e24
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/cayman_defconfig
@@ -0,0 +1,67 @@
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_MEMORY_START=0x80000000
+CONFIG_MEMORY_SIZE=0x00400000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_CACHE_OFF=y
+CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_HEARTBEAT=y
+CONFIG_PREEMPT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=m
+CONFIG_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_MINIX_FS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/dreamcast_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/dreamcast_defconfig
new file mode 100644
index 0000000..3f08dc5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/dreamcast_defconfig
@@ -0,0 +1,72 @@
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7091=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SH_DREAMCAST=y
+CONFIG_SH_PCLK_FREQ=49876504
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
+CONFIG_NR_DMA_CHANNELS_BOOL=y
+CONFIG_NR_DMA_CHANNELS=9
+CONFIG_SECCOMP=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
+CONFIG_MAPLE=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_GDROM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_MAPLE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_SH_WDT=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_PVR2=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/ecovec24-romimage_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/ecovec24-romimage_defconfig
new file mode 100644
index 0000000..0c5dfcc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/ecovec24-romimage_defconfig
@@ -0,0 +1,60 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_KALLSYMS is not set
+CONFIG_SLAB=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+CONFIG_MEMORY_SIZE=0x10000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_ECOVEC=y
+# CONFIG_SH_TIMER_TMU is not set
+CONFIG_KEXEC=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC0,115200"
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SH_ETH=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_I2C_SH_MOBILE=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_USB=y
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/ecovec24_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/ecovec24_defconfig
new file mode 100644
index 0000000..3568310
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/ecovec24_defconfig
@@ -0,0 +1,139 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_KALLSYMS is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_MEMORY_SIZE=0x10000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_ECOVEC=y
+# CONFIG_SH_TIMER_CMT is not set
+CONFIG_HEARTBEAT=y
+CONFIG_SECCOMP=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=248M memchunk.vpu=8m memchunk.veu0=4m"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=y
+CONFIG_SH_SIR=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SH_ETH=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_TSC2007=y
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_SH_MOBILE=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+# CONFIG_HWMON is not set
+CONFIG_MFD_SH_MOBILE_SDHI=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_MT9T112=y
+CONFIG_SOC_CAMERA_TW9910=y
+CONFIG_VIDEO_SH_MOBILE_CEU=y
+# CONFIG_V4L_USB_DRIVERS is not set
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_SEQ_DUMMY=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_SH4_FSI=y
+CONFIG_SND_FSI_DA7210=y
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+CONFIG_MMC_SDHI=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RS5C372=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_T10DIF=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/edosk7705_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/edosk7705_defconfig
new file mode 100644
index 0000000..db756e0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/edosk7705_defconfig
@@ -0,0 +1,37 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_UID16 is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_PRINTK is not set
+# CONFIG_BUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BLOCK is not set
+CONFIG_CPU_SUBTYPE_SH7705=y
+CONFIG_SH_EDOSK7705=y
+CONFIG_SH_PCLK_FREQ=31250000
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_PROC_FS is not set
+# CONFIG_SYSFS is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_CRC32 is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/edosk7760_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/edosk7760_defconfig
new file mode 100644
index 0000000..aab4ff1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/edosk7760_defconfig
@@ -0,0 +1,116 @@
+CONFIG_LOCALVERSION="_edosk7760"
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7760=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SH_EDOSK7760=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_DEBUG_DRIVER=y
+CONFIG_DEBUG_DEVRES=y
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_ABSENT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=26000
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_SH7760=y
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+# CONFIG_HWMON is not set
+CONFIG_FB=m
+CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_SOC=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/espt_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/espt_defconfig
new file mode 100644
index 0000000..2985fe7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/espt_defconfig
@@ -0,0 +1,118 @@
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7763=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_SH_ESPT=y
+CONFIG_SH_PCLK_FREQ=66666666
+CONFIG_SECCOMP=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SH_ETH=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_SH7760=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_T10DIF=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/hp6xx_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/hp6xx_defconfig
new file mode 100644
index 0000000..4dcf7f5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/hp6xx_defconfig
@@ -0,0 +1,63 @@
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7709=y
+CONFIG_MEMORY_START=0x0d000000
+CONFIG_MEMORY_SIZE=0x00400000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_HP6XX=y
+CONFIG_SH_PCLK_FREQ=22110000
+CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
+CONFIG_HD64461_ENABLER=y
+CONFIG_PCCARD=y
+CONFIG_PM=y
+CONFIG_APM_EMULATION=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_HP6XX=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_HP600=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_LEGACY_PTY_COUNT=64
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_HIT=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_PEARL_8x8=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SH=y
+CONFIG_EXT2_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/j2_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/j2_defconfig
new file mode 100644
index 0000000..2eb81eb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/j2_defconfig
@@ -0,0 +1,42 @@
+CONFIG_SMP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CPU_SUBTYPE_J2=y
+CONFIG_MEMORY_START=0x10000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_DEVICE_TREE=y
+CONFIG_SH_JCORE_SOC=y
+CONFIG_HZ_100=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttyUL0 earlycon"
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_SPI=y
+CONFIG_SPI_JCORE=y
+CONFIG_WATCHDOG=y
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+CONFIG_CLKSRC_JCORE_PIT=y
+CONFIG_JCORE_AIC=y
+CONFIG_EXT4_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_FAT_DEFAULT_UTF8=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_UTF8=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/kfr2r09-romimage_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/kfr2r09-romimage_defconfig
new file mode 100644
index 0000000..9cc37f2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/kfr2r09-romimage_defconfig
@@ -0,0 +1,54 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_KALLSYMS is not set
+CONFIG_SLAB=y
+# CONFIG_BLOCK is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_KFR2R09=y
+# CONFIG_SH_TIMER_TMU is not set
+CONFIG_HZ_100=y
+CONFIG_KEXEC=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC1,115200 quiet"
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_I2C_SH_MOBILE=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_CDC_COMPOSITE=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_CRC32 is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/kfr2r09_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/kfr2r09_defconfig
new file mode 100644
index 0000000..46693d0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/kfr2r09_defconfig
@@ -0,0 +1,87 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_KALLSYMS is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_KFR2R09=y
+# CONFIG_SH_TIMER_TMU is not set
+CONFIG_NO_HZ=y
+CONFIG_HZ_1000=y
+CONFIG_KEXEC=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200"
+# CONFIG_SUSPEND is not set
+CONFIG_CPU_IDLE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_GENERIC=y
+CONFIG_MTD_UBI=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_SH_MOBILE=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SH=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/landisk_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/landisk_defconfig
new file mode 100644
index 0000000..467f4d2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/landisk_defconfig
@@ -0,0 +1,120 @@
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7751R=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_LANDISK=y
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_HEARTBEAT=y
+CONFIG_KEXEC=y
+CONFIG_PCI=y
+CONFIG_PCCARD=y
+CONFIG_YENTA=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_PNP=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_ATALK=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_OFFBOARD=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_AEC62XX=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_8139CP=y
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SOUND=m
+CONFIG_SOUND_PRIME=m
+CONFIG_USB_HID=m
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_REISERFS_FS=y
+CONFIG_ISO9660_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=m
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_UFS_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_SMB_FS=m
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_T10DIF=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/lboxre2_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/lboxre2_defconfig
new file mode 100644
index 0000000..9e3edfd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/lboxre2_defconfig
@@ -0,0 +1,64 @@
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7751R=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_LBOX_RE2=y
+CONFIG_SH_PCLK_FREQ=40000000
+CONFIG_KEXEC=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
+CONFIG_PCI=y
+CONFIG_PCCARD=y
+CONFIG_YENTA=y
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TI is not set
+# CONFIG_YENTA_TOSHIBA is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_PNP=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139TOO=y
+CONFIG_8139TOO_TUNE_TWISTER=y
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_PCNET=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_RTC_CLASS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_T10DIF=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/magicpanelr2_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/magicpanelr2_defconfig
new file mode 100644
index 0000000..fb7415d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/magicpanelr2_defconfig
@@ -0,0 +1,93 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_AUDIT=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_KALLSYMS_ALL=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7720=y
+CONFIG_MEMORY_START=0x0C000000
+CONFIG_MEMORY_SIZE=0x03F00000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_MAGIC_PANEL_R2=y
+CONFIG_SH_PCLK_FREQ=24000000
+CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
+CONFIG_HEARTBEAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_NETDEVICES=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=48
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+CONFIG_RTC_DRV_SH=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_KOBJECT=y
+CONFIG_DEBUG_INFO=y
+CONFIG_FRAME_POINTER=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/microdev_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/microdev_defconfig
new file mode 100644
index 0000000..c3f7d58
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/microdev_defconfig
@@ -0,0 +1,47 @@
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH4_202=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_SH4202_MICRODEV=y
+CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
+CONFIG_HEARTBEAT=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
+CONFIG_SUPERHYWAY=y
+CONFIG_NET=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/migor_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/migor_defconfig
new file mode 100644
index 0000000..e04f21b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/migor_defconfig
@@ -0,0 +1,100 @@
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7722=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_NUMA=y
+# CONFIG_MIGRATION is not set
+CONFIG_SH_MIGOR=y
+# CONFIG_SH_TIMER_CMT is not set
+CONFIG_SECCOMP=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_FW_LOADER=m
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_MIGOR=y
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_HWMON is not set
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_TW9910=y
+CONFIG_SOC_CAMERA_OV772X=y
+CONFIG_VIDEO_SH_MOBILE_CEU=y
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_M66592=y
+CONFIG_USB_G_SERIAL=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RS5C372=y
+CONFIG_RTC_DRV_SH=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_DNOTIFY is not set
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_DEBUG_FS=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_T10DIF=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/polaris_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/polaris_defconfig
new file mode 100644
index 0000000..0a432b5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/polaris_defconfig
@@ -0,0 +1,86 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_AUDIT=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_CPU_SUBTYPE_SH7709=y
+CONFIG_MEMORY_START=0x0C000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_FPU_EMU=y
+CONFIG_SH_POLARIS=y
+CONFIG_SH_PCLK_FREQ=33000000
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
+CONFIG_HEARTBEAT=y
+CONFIG_HZ_100=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_COMPAT=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_NETDEVICES=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SH=y
+# CONFIG_DNOTIFY is not set
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_SG=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/r7780mp_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/r7780mp_defconfig
new file mode 100644
index 0000000..435bcd6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/r7780mp_defconfig
@@ -0,0 +1,114 @@
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7780=y
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SPECULATIVE_EXECUTION=y
+CONFIG_SH_HIGHLANDER=y
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_PUSH_SWITCH=y
+CONFIG_KEXEC=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IPV6 is not set
+CONFIG_BRIDGE=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_FW_LOADER=m
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_ATA=y
+CONFIG_SATA_SIL=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_AX88796=y
+CONFIG_AX88796_93CX6=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+# CONFIG_8139TOO_PIO is not set
+CONFIG_8139TOO_8129=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_E1000=m
+CONFIG_R8169=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HIGHLANDER=y
+CONFIG_THERMAL=y
+CONFIG_SOUND=m
+CONFIG_SOUND_PRIME=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RS5C372=y
+CONFIG_RTC_DRV_SH=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_FUSE_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_MINIX_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V4=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_T10DIF=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/r7785rp_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/r7785rp_defconfig
new file mode 100644
index 0000000..5877e6d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/r7785rp_defconfig
@@ -0,0 +1,112 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_RCU_TRACE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_HUGETLB_PAGE_SIZE_1MB=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SH_HIGHLANDER=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CPU_FREQ=y
+CONFIG_SH_CPU_FREQ=y
+CONFIG_HEARTBEAT=y
+CONFIG_PUSH_SWITCH=y
+CONFIG_KEXEC=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
+CONFIG_PCI=y
+CONFIG_BINFMT_MISC=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IPV6 is not set
+CONFIG_BRIDGE=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_FW_LOADER=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_ATA=y
+CONFIG_SATA_SIL=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_AX88796=y
+CONFIG_AX88796_93CX6=y
+CONFIG_R8169=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HIGHLANDER=y
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_SOUND=m
+CONFIG_SOUND_PRIME=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RS5C372=y
+CONFIG_RTC_DRV_SH=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_FUSE_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_MINIX_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V4=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_SH_STANDARD_BIOS=y
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_4KSTACKS=y
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_T10DIF=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/rsk7201_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/rsk7201_defconfig
new file mode 100644
index 0000000..b195bc0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/rsk7201_defconfig
@@ -0,0 +1,67 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_AIO is not set
+CONFIG_SLOB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7201=y
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_RSK=y
+CONFIG_SH_PCLK_FREQ=40000000
+CONFIG_HZ_1000=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+CONFIG_PM=y
+CONFIG_CPU_IDLE=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SH=y
+CONFIG_EXT2_FS=y
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_JFFS2_FS=y
+CONFIG_ROMFS_FS=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/rsk7203_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/rsk7203_defconfig
new file mode 100644
index 0000000..8c47195
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/rsk7203_defconfig
@@ -0,0 +1,125 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_SLOB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7203=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_RSK=y
+CONFIG_SH_PCLK_FREQ=16670800
+CONFIG_CPU_FREQ=y
+CONFIG_SH_CPU_FREQ=y
+CONFIG_HEARTBEAT=y
+CONFIG_HZ_1000=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+CONFIG_PM=y
+CONFIG_CPU_IDLE=y
+CONFIG_NET=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=4
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_REGULATOR=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=y
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SH=y
+# CONFIG_DNOTIFY is not set
+CONFIG_ROMFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_OBJECTS=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_STACK_USAGE=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/rsk7264_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/rsk7264_defconfig
new file mode 100644
index 0000000..2b9b731
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/rsk7264_defconfig
@@ -0,0 +1,76 @@
+CONFIG_LOCALVERSION="uClinux RSK2+SH7264"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_NAMESPACES=y
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_PROFILING=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7264=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_RSK=y
+# CONFIG_SH_TIMER_MTU2 is not set
+CONFIG_BINFMT_FLAT=y
+CONFIG_NET=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC911X=y
+CONFIG_SMSC_PHY=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HWMON is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_VFAT_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_FTRACE is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/rsk7269_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/rsk7269_defconfig
new file mode 100644
index 0000000..d041f7b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/rsk7269_defconfig
@@ -0,0 +1,60 @@
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_CPU_SUBTYPE_SH7269=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_RSK=y
+# CONFIG_SH_TIMER_MTU2 is not set
+CONFIG_SH_PCLK_FREQ=66700000
+CONFIG_BINFMT_FLAT=y
+CONFIG_NET=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC911X=y
+CONFIG_SMSC_PHY=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HWMON is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_VFAT_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_FTRACE is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/rts7751r2d1_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/rts7751r2d1_defconfig
new file mode 100644
index 0000000..379d673
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/rts7751r2d1_defconfig
@@ -0,0 +1,94 @@
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7751R=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_RTS7751R2D=y
+CONFIG_RTS7751R2D_1=y
+CONFIG_HEARTBEAT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
+CONFIG_PCI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_FW_LOADER=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_SCI=y
+CONFIG_MFD_SM501=y
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_R9701=y
+CONFIG_EXT2_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_MINIX_FS=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_DEBUG_FS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_T10DIF=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/rts7751r2dplus_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/rts7751r2dplus_defconfig
new file mode 100644
index 0000000..11177bc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/rts7751r2dplus_defconfig
@@ -0,0 +1,99 @@
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7751R=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_RTS7751R2D=y
+CONFIG_RTS7751R2D_PLUS=y
+CONFIG_HEARTBEAT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
+CONFIG_PCI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_FW_LOADER=m
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_SCI=y
+CONFIG_MFD_SM501=y
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_R9701=y
+CONFIG_EXT2_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_MINIX_FS=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_DEBUG_FS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_T10DIF=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/sdk7780_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/sdk7780_defconfig
new file mode 100644
index 0000000..95e5208
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/sdk7780_defconfig
@@ -0,0 +1,144 @@
+CONFIG_LOCALVERSION="_SDK7780"
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_RELAY=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7780=y
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SH_SDK7780=y
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
+CONFIG_HEARTBEAT=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/nfs nfsroot=192.168.0.1:/home/rootfs"
+CONFIG_PCI=y
+CONFIG_PCI_DEBUG=y
+CONFIG_PCCARD=y
+CONFIG_YENTA=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_NET_SCHED=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_PARPORT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_PLATFORM=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_ATA=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+CONFIG_NETCONSOLE=y
+CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_HWMON is not set
+CONFIG_SSB=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SOUND_PRIME=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_PRINTER=y
+CONFIG_USB_STORAGE=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_DEBUG=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_HUGETLBFS=y
+CONFIG_MINIX_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_SH_STANDARD_BIOS=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_T10DIF=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/sdk7786_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/sdk7786_defconfig
new file mode 100644
index 0000000..e9ee0c8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/sdk7786_defconfig
@@ -0,0 +1,225 @@
+CONFIG_KERNEL_LZO=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_TREE_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+# CONFIG_PROC_PID_CPUSET is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_MEMCG=y
+CONFIG_CGROUP_MEMCG_SWAP=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_CPU_SUBTYPE_SH7786=y
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x20000000
+CONFIG_PMB=y
+CONFIG_NUMA=y
+CONFIG_HUGETLB_PAGE_SIZE_64MB=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_KSM=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SPECULATIVE_EXECUTION=y
+CONFIG_SH_SDK7786=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_SH_CPU_FREQ=y
+CONFIG_SH_DMA=y
+CONFIG_HEARTBEAT=y
+CONFIG_HZ_1000=y
+CONFIG_KEXEC=y
+CONFIG_SECCOMP=y
+CONFIG_SMP=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PREEMPT=y
+CONFIG_INTC_USERIMASK=y
+CONFIG_INTC_BALANCING=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200 root=/dev/sda1 nmi_debug=state,debounce rootdelay=5 pmb=iomap ignore_loglevel"
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER_INJECT=y
+CONFIG_PCIEASPM_DEBUG=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM=y
+CONFIG_CPU_IDLE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_FTL=y
+CONFIG_NFTL=y
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_PHRAM=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_NAND_SH_FLCTL=m
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_PLATFORM=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_SATA_SIL24=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_DEBUG=y
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
+# CONFIG_WLAN is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_SH_SCI_DMA=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_SH_WDT=y
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_M66592=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MAX6900=y
+CONFIG_RTC_DRV_SH=y
+CONFIG_DMADEVICES=y
+CONFIG_SH_DMAE=y
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
+CONFIG_XFS_FS=y
+CONFIG_BTRFS_FS=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=m
+CONFIG_FSCACHE=m
+CONFIG_CACHEFILES=m
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_UBIFS_FS=m
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_ROMFS_FS=m
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_UTF8=m
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_LATENCYTOP=y
+CONFIG_FUNCTION_TRACER=y
+# CONFIG_FUNCTION_GRAPH_TRACER is not set
+CONFIG_DMA_API_DEBUG=y
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_DWARF_UNWINDER=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/se7206_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/se7206_defconfig
new file mode 100644
index 0000000..3553acd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/se7206_defconfig
@@ -0,0 +1,114 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_RCU_TRACE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_MEMCG=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7206=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_7206_SOLUTION_ENGINE=y
+CONFIG_CPU_FREQ=y
+CONFIG_SH_CPU_FREQ=y
+CONFIG_HEARTBEAT=y
+CONFIG_HZ_1000=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_EEPROM_93CX6=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=4
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SH=y
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_LIST=y
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/se7343_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/se7343_defconfig
new file mode 100644
index 0000000..fc77a67
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/se7343_defconfig
@@ -0,0 +1,99 @@
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7343=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_7343_SOLUTION_ENGINE=y
+# CONFIG_SH_TIMER_CMT is not set
+CONFIG_HEARTBEAT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC0,115200"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_SCSI=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_DM9601=y
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=4
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_ISP116X_HCD=y
+CONFIG_UIO=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFSD=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/se7619_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/se7619_defconfig
new file mode 100644
index 0000000..f54722d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/se7619_defconfig
@@ -0,0 +1,46 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_7619_SOLUTION_ENGINE=y
+CONFIG_HZ_100=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_SYSFS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/se7705_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/se7705_defconfig
new file mode 100644
index 0000000..ddfc698
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/se7705_defconfig
@@ -0,0 +1,57 @@
+# CONFIG_SWAP is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7705=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_SH_ADC is not set
+CONFIG_SH_SOLUTION_ENGINE=y
+CONFIG_HEARTBEAT=y
+CONFIG_PREEMPT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_STNIC=y
+CONFIG_PPP=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_DEFLATE=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_HW_RANDOM=y
+CONFIG_EXT2_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_SYSFS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/se7712_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/se7712_defconfig
new file mode 100644
index 0000000..5a10976
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/se7712_defconfig
@@ -0,0 +1,105 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_BUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7712=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_SH_DSP is not set
+# CONFIG_SH_ADC is not set
+CONFIG_SH_SOLUTION_ENGINE=y
+CONFIG_SH_PCLK_FREQ=66666666
+CONFIG_HEARTBEAT=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=y
+CONFIG_NET_SCH_HTB=y
+CONFIG_NET_SCH_HFSC=y
+CONFIG_NET_SCH_PRIO=y
+CONFIG_NET_SCH_RED=y
+CONFIG_NET_SCH_SFQ=y
+CONFIG_NET_SCH_TEQL=y
+CONFIG_NET_SCH_TBF=y
+CONFIG_NET_SCH_GRED=y
+CONFIG_NET_SCH_DSMARK=y
+CONFIG_NET_SCH_NETEM=y
+CONFIG_NET_CLS_TCINDEX=y
+CONFIG_NET_CLS_ROUTE4=y
+CONFIG_NET_CLS_FW=y
+CONFIG_NET_CLS_IND=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SH_ETH=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HWMON is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO=y
+CONFIG_FRAME_POINTER=y
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/se7721_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/se7721_defconfig
new file mode 100644
index 0000000..9c0ef13
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/se7721_defconfig
@@ -0,0 +1,131 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_BUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7721=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_SH_DSP is not set
+# CONFIG_SH_ADC is not set
+CONFIG_SH_7721_SOLUTION_ENGINE=y
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_HEARTBEAT=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=y
+CONFIG_NET_SCH_HTB=y
+CONFIG_NET_SCH_HFSC=y
+CONFIG_NET_SCH_PRIO=y
+CONFIG_NET_SCH_RED=y
+CONFIG_NET_SCH_SFQ=y
+CONFIG_NET_SCH_TEQL=y
+CONFIG_NET_SCH_TBF=y
+CONFIG_NET_SCH_GRED=y
+CONFIG_NET_SCH_DSMARK=y
+CONFIG_NET_SCH_NETEM=y
+CONFIG_NET_CLS_TCINDEX=y
+CONFIG_NET_CLS_ROUTE4=y
+CONFIG_NET_CLS_FW=y
+CONFIG_NET_CLS_IND=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/se7722_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/se7722_defconfig
new file mode 100644
index 0000000..ccc7fc4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/se7722_defconfig
@@ -0,0 +1,59 @@
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7722=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_NUMA=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SH_7722_SOLUTION_ENGINE=y
+# CONFIG_SH_TIMER_CMT is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HEARTBEAT=y
+CONFIG_KEXEC=y
+CONFIG_PREEMPT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SH=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/se7724_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/se7724_defconfig
new file mode 100644
index 0000000..aedb3a2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/se7724_defconfig
@@ -0,0 +1,136 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_KALLSYMS is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_7724_SOLUTION_ENGINE=y
+# CONFIG_SH_TIMER_CMT is not set
+CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
+CONFIG_HEARTBEAT=y
+CONFIG_SECCOMP=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=tty1 console=ttySC3,115200 root=/dev/nfs ip=dhcp memchunk.vpu=4m"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SH_ETH=y
+CONFIG_SMC91X=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_SH_MOBILE=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+# CONFIG_HWMON is not set
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_DVB_CORE=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_OV772X=y
+CONFIG_VIDEO_SH_MOBILE_CEU=y
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=m
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SUPERH is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_SH4_FSI=m
+CONFIG_SND_FSI_AK4642=y
+CONFIG_SND_SOC_ALL_CODECS=m
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_T10DIF=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/se7750_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/se7750_defconfig
new file mode 100644
index 0000000..b23f675
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/se7750_defconfig
@@ -0,0 +1,57 @@
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7750=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_SOLUTION_ENGINE=y
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_HEARTBEAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_ROM=y
+CONFIG_IDE=y
+CONFIG_SCSI=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_STNIC=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_WATCHDOG=y
+CONFIG_SH_WDT=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/se7751_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/se7751_defconfig
new file mode 100644
index 0000000..1623436
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/se7751_defconfig
@@ -0,0 +1,47 @@
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7751=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_7751_SOLUTION_ENGINE=y
+CONFIG_HEARTBEAT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC1,38400"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_RAM=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_HW_RANDOM=y
+CONFIG_WATCHDOG=y
+CONFIG_EXT2_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/se7780_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/se7780_defconfig
new file mode 100644
index 0000000..ec32c82
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/se7780_defconfig
@@ -0,0 +1,107 @@
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_EPOLL is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7780=y
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_SH_7780_SOLUTION_ENGINE=y
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_HEARTBEAT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+# CONFIG_MTD_CFI_I1 is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_ROM=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=y
+CONFIG_SATA_SIL=y
+CONFIG_NETDEVICES=y
+CONFIG_PHYLIB=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+CONFIG_NET_PCI=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_THERMAL=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_PRIME=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/secureedge5410_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/secureedge5410_defconfig
new file mode 100644
index 0000000..360592d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/secureedge5410_defconfig
@@ -0,0 +1,54 @@
+# CONFIG_SWAP is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7751R=y
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_SECUREEDGE5410=y
+CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK_RO=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1302=y
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/sh03_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/sh03_defconfig
new file mode 100644
index 0000000..2156223
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/sh03_defconfig
@@ -0,0 +1,132 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7751=y
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_SH03=y
+CONFIG_HEARTBEAT=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
+CONFIG_PCI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_SCSI=m
+CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_8139CP=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_WATCHDOG=y
+CONFIG_SH_WDT=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_DEBUG_FS=y
+CONFIG_SH_STANDARD_BIOS=y
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/sh2007_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/sh2007_defconfig
new file mode 100644
index 0000000..34094e0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/sh2007_defconfig
@@ -0,0 +1,203 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_IKCONFIG=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_KALLSYMS_ALL=y
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7780=y
+CONFIG_MEMORY_SIZE=0x08000000
+# CONFIG_VSYSCALL is not set
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_SH2007=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
+CONFIG_NR_DMA_CHANNELS_BOOL=y
+CONFIG_HZ_100=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC1,115200 ip=dhcp root=/dev/nfs rw nfsroot=/nfs/rootfs,rsize=1024,wsize=1024 earlyprintk=sh-sci.1"
+CONFIG_PCCARD=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_NET_IPIP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NET_PKTGEN=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=y
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=y
+CONFIG_SCSI_SRP_ATTRS=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+CONFIG_EQUALIZER=y
+CONFIG_TUN=y
+CONFIG_VETH=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_SH_WDT=y
+CONFIG_SSB=y
+CONFIG_FB=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_DMADEVICES=y
+CONFIG_TIMB_DMA=y
+CONFIG_EXT3_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=932
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_FRAME_POINTER=y
+CONFIG_SH_STANDARD_BIOS=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_LIBCRC32C=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/sh7710voipgw_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/sh7710voipgw_defconfig
new file mode 100644
index 0000000..65a1aad
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/sh7710voipgw_defconfig
@@ -0,0 +1,58 @@
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7710=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x00800000
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_SH_ADC is not set
+CONFIG_SH_PCLK_FREQ=32768000
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=y
+CONFIG_NET_CLS_BASIC=y
+CONFIG_NET_CLS_TCINDEX=y
+CONFIG_NET_CLS_ROUTE4=y
+CONFIG_NET_CLS_U32=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_RAM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_PHONE=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_DNOTIFY is not set
+CONFIG_JFFS2_FS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/sh7724_generic_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/sh7724_generic_defconfig
new file mode 100644
index 0000000..d15e536
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/sh7724_generic_defconfig
@@ -0,0 +1,45 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_CGROUPS=y
+# CONFIG_UID16 is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CPU_FREQ=y
+CONFIG_SH_CPU_FREQ=y
+CONFIG_KEXEC=y
+CONFIG_KEXEC_JUMP=y
+CONFIG_HIBERNATION=y
+CONFIG_CPU_IDLE=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SH=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_PROC_FS is not set
+# CONFIG_SYSFS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_CRC32 is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/sh7757lcr_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/sh7757lcr_defconfig
new file mode 100644
index 0000000..b0c4bc8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/sh7757lcr_defconfig
@@ -0,0 +1,87 @@
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS_ALL=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7757=y
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x0f000000
+CONFIG_PMB=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_SH7757LCR=y
+CONFIG_HEARTBEAT=y
+CONFIG_SECCOMP=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/nfs ip=dhcp"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IPV6=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_M25P80=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_VITESSE_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SH_ETH=y
+# CONFIG_WLAN is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_SH=y
+# CONFIG_HWMON is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SH=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_SH=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHI=y
+CONFIG_MMC_SH_MMCIF=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_SQUASHFS=y
+CONFIG_MINIX_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/sh7763rdp_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/sh7763rdp_defconfig
new file mode 100644
index 0000000..2ef780f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/sh7763rdp_defconfig
@@ -0,0 +1,120 @@
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7763=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_SH_SH7763RDP=y
+CONFIG_SH_PCLK_FREQ=66666666
+CONFIG_SECCOMP=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SH_ETH=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_SH7760=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_T10DIF=y
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/sh7770_generic_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/sh7770_generic_defconfig
new file mode 100644
index 0000000..742634b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/sh7770_generic_defconfig
@@ -0,0 +1,47 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_CGROUPS=y
+# CONFIG_UID16 is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7770=y
+CONFIG_SH_PCLK_FREQ=41666666
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CPU_FREQ=y
+CONFIG_SH_CPU_FREQ=y
+CONFIG_KEXEC=y
+CONFIG_KEXEC_JUMP=y
+CONFIG_PM=y
+CONFIG_HIBERNATION=y
+CONFIG_CPU_IDLE=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SH=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_PROC_FS is not set
+# CONFIG_SYSFS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_CRC32 is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/sh7785lcr_32bit_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/sh7785lcr_32bit_defconfig
new file mode 100644
index 0000000..2ddf5ca
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/sh7785lcr_32bit_defconfig
@@ -0,0 +1,153 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_GCOV_KERNEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x20000000
+CONFIG_PMB=y
+CONFIG_HUGETLB_PAGE_SIZE_1MB=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SPECULATIVE_EXECUTION=y
+CONFIG_SH_SH7785LCR=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_SH_CPU_FREQ=y
+CONFIG_HEARTBEAT=y
+CONFIG_KEXEC=y
+CONFIG_SECCOMP=y
+CONFIG_PREEMPT=y
+CONFIG_INTC_USERIMASK=y
+CONFIG_PCI=y
+CONFIG_PCI_DEBUG=y
+CONFIG_PM=y
+CONFIG_CPU_IDLE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_SATA_SIL=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=y
+CONFIG_R8169=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_SH_WDT=y
+CONFIG_MFD_SM501=y
+# CONFIG_VGA_ARB is not set
+CONFIG_FB=y
+CONFIG_FB_KYRO=y
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_VERBOSE=y
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_CMIPCI=y
+CONFIG_SND_EMU10K1=y
+# CONFIG_SND_SUPERH is not set
+CONFIG_USB=y
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RS5C372=y
+CONFIG_DMADEVICES=y
+CONFIG_UIO=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_MINIX_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+CONFIG_LATENCYTOP=y
+# CONFIG_FTRACE is not set
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/sh7785lcr_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/sh7785lcr_defconfig
new file mode 100644
index 0000000..7098828
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/sh7785lcr_defconfig
@@ -0,0 +1,119 @@
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SH_SH7785LCR=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HEARTBEAT=y
+CONFIG_KEXEC=y
+CONFIG_PREEMPT=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_SATA_SIL=y
+CONFIG_NETDEVICES=y
+CONFIG_R8169=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_HWMON is not set
+CONFIG_MFD_SM501=y
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_TEST=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RS5C372=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_MINIX_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V4=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/shmin_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/shmin_defconfig
new file mode 100644
index 0000000..d589cfd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/shmin_defconfig
@@ -0,0 +1,54 @@
+# CONFIG_SWAP is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_BUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLOB=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7706=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x00800000
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_SH_ADC is not set
+CONFIG_SH_SHMIN=y
+CONFIG_SH_PCLK_FREQ=32000000
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_IPV6 is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HWMON is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_SYSFS is not set
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/shx3_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/shx3_defconfig
new file mode 100644
index 0000000..755c4f7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/shx3_defconfig
@@ -0,0 +1,104 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_RCU_TRACE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_MEMCG=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_KALLSYMS_ALL=y
+CONFIG_SLOB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SHX3=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_NUMA=y
+CONFIG_PAGE_SIZE_64KB=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SH_X3PROTO=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_SH_CPU_FREQ=y
+CONFIG_HEARTBEAT=y
+CONFIG_KEXEC=y
+CONFIG_SECCOMP=y
+CONFIG_SMP=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_VCAN=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=m
+CONFIG_SPI=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_M66592=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SH=y
+CONFIG_UIO=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_VM=y
+CONFIG_FRAME_POINTER=y
+CONFIG_SH_STANDARD_BIOS=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/titan_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/titan_defconfig
new file mode 100644
index 0000000..ceb48e9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/titan_defconfig
@@ -0,0 +1,277 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7751R=y
+CONFIG_MEMORY_START=0x08030000
+CONFIG_MEMORY_SIZE=0x7fd0000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_TITAN=y
+CONFIG_SH_PCLK_FREQ=30000000
+CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
+CONFIG_PCI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_DIAG=m
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=y
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_CLS_IND=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_FW_LOADER=m
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_BLOCK=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_NAND=m
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_ATA_OVER_ETH=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=m
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_PHYLIB=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+CONFIG_8139TOO_TUNE_TWISTER=y
+CONFIG_8139_OLD_RX_RESET=y
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_PLUSB=m
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_WATCHDOG=y
+CONFIG_SH_WDT=m
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SH=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_REISERFS_FS=m
+CONFIG_XFS_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_ROMFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+CONFIG_SMB_FS=m
+CONFIG_CIFS=m
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_UTF8=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC16=m
+CONFIG_LIBCRC32C=m
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/ul2_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/ul2_defconfig
new file mode 100644
index 0000000..5f2921a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/ul2_defconfig
@@ -0,0 +1,88 @@
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_CPU_SUBTYPE_SH7366=y
+CONFIG_MEMORY_SIZE=0x01f00000
+CONFIG_NUMA=y
+# CONFIG_MIGRATION is not set
+# CONFIG_SH_DSP is not set
+# CONFIG_SH_TIMER_CMT is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+CONFIG_KEXEC=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=dhcp"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IPV6 is not set
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_RAM=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=1
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/configs/urquell_defconfig b/src/kernel/linux/v4.14/arch/sh/configs/urquell_defconfig
new file mode 100644
index 0000000..7d5591b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/configs/urquell_defconfig
@@ -0,0 +1,150 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+# CONFIG_PROC_PID_CPUSET is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_MEMCG=y
+CONFIG_CGROUP_MEMCG_SWAP=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7786=y
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SH_URQUELL=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HEARTBEAT=y
+CONFIG_KEXEC=y
+CONFIG_SECCOMP=y
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEASPM_DEBUG=y
+CONFIG_PCI_DEBUG=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM=y
+CONFIG_CPU_IDLE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_SATA_SIL24=y
+CONFIG_NETDEVICES=y
+CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+CONFIG_NET_PCI=y
+CONFIG_8139CP=y
+CONFIG_SKY2=y
+CONFIG_SKY2_DEBUG=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_PCA_PLATFORM=y
+CONFIG_MFD_SM501=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SH=y
+CONFIG_RTC_DRV_GENERIC=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
+CONFIG_BTRFS_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_FTRACE is not set
+# CONFIG_DUMP_CODE is not set
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/Kconfig b/src/kernel/linux/v4.14/arch/sh/drivers/Kconfig
new file mode 100644
index 0000000..80a45ad
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/Kconfig
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+source "arch/sh/drivers/dma/Kconfig"
+source "arch/sh/cchips/Kconfig"
+
+menu "Additional SuperH Device Drivers"
+
+config HEARTBEAT
+	bool "Heartbeat LED"
+	help
+	  Use the power-on LED on your machine as a load meter.  The exact
+	  behavior is platform-dependent, but normally the flash frequency is
+	  a hyperbolic function of the 5-minute load average.
+
+config PUSH_SWITCH
+	tristate "Push switch support"
+	help
+	  This enables support for the push switch framework, a simple
+	  framework that allows for sysfs driven switch status reporting.
+
+endmenu
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/Makefile b/src/kernel/linux/v4.14/arch/sh/drivers/Makefile
new file mode 100644
index 0000000..3e93b43
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Linux SuperH-specific device drivers.
+#
+
+obj-y		+= dma/
+
+obj-$(CONFIG_PCI)		+= pci/
+obj-$(CONFIG_SUPERHYWAY)	+= superhyway/
+obj-$(CONFIG_PUSH_SWITCH)	+= push-switch.o
+obj-$(CONFIG_HEARTBEAT)		+= heartbeat.o
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/dma/Kconfig b/src/kernel/linux/v4.14/arch/sh/drivers/dma/Kconfig
new file mode 100644
index 0000000..d0de378
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/dma/Kconfig
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+menu "DMA support"
+
+
+config SH_DMA
+	bool "SuperH on-chip DMA controller (DMAC) support"
+	depends on CPU_SH3 || CPU_SH4
+	default n
+
+config SH_DMA_IRQ_MULTI
+	bool
+	depends on SH_DMA
+	default y if CPU_SUBTYPE_SH7750  || CPU_SUBTYPE_SH7751  || \
+		     CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
+		     CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091  || \
+		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7780  || \
+		     CPU_SUBTYPE_SH7785  || CPU_SUBTYPE_SH7760
+
+config SH_DMA_API
+	depends on SH_DMA
+	bool "SuperH DMA API support"
+	default n
+	help
+	  SH_DMA_API always enabled DMA API of used SuperH.
+	  If you want to use DMA ENGINE, you must not enable this.
+	  Please enable DMA_ENGINE and SH_DMAE.
+
+config NR_ONCHIP_DMA_CHANNELS
+	int
+	depends on SH_DMA
+	default "4" if CPU_SUBTYPE_SH7750  || CPU_SUBTYPE_SH7751  || \
+		       CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7091
+	default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || \
+		       CPU_SUBTYPE_SH7760
+	default "12" if CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7780  || \
+			CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7724
+	default "6"
+	help
+	  This allows you to specify the number of channels that the on-chip
+	  DMAC supports. This will be 4 for SH7750/SH7751/Sh7750S/SH7091 and 8 for the
+	  SH7750R/SH7751R/SH7760, 12 for the SH7723/SH7780/SH7785/SH7724, default is 6.
+
+config SH_DMABRG
+	bool "SH7760 DMABRG support"
+	depends on CPU_SUBTYPE_SH7760
+	help
+	  The DMABRG does data transfers from main memory to Audio/USB units
+	  of the SH7760.
+	  Say Y if you want to use Audio/USB DMA on your SH7760 board.
+
+config PVR2_DMA
+	tristate "PowerVR 2 DMAC support"
+	depends on SH_DREAMCAST && SH_DMA
+	help
+	  Selecting this will enable support for the PVR2 DMA controller.
+	  As this chains off of the on-chip DMAC, that must also be
+	  enabled by default.
+
+	  This is primarily used by the pvr2fb framebuffer driver for
+	  certain optimizations, but is not necessary for functionality.
+
+	  If in doubt, say N.
+
+config G2_DMA
+	tristate "G2 Bus DMA support"
+	depends on SH_DREAMCAST
+	select SH_DMA_API
+	help
+	  This enables support for the DMA controller for the Dreamcast's
+	  G2 bus. Drivers that want this will generally enable this on
+	  their own.
+
+	  If in doubt, say N.
+
+endmenu
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/dma/Makefile b/src/kernel/linux/v4.14/arch/sh/drivers/dma/Makefile
new file mode 100644
index 0000000..d88c948
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/dma/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the SuperH DMA specific kernel interface routines under Linux.
+#
+
+obj-$(CONFIG_SH_DMA_API)	+= dma-sh.o dma-api.o dma-sysfs.o
+obj-$(CONFIG_PVR2_DMA)		+= dma-pvr2.o
+obj-$(CONFIG_G2_DMA)		+= dma-g2.o
+obj-$(CONFIG_SH_DMABRG)		+= dmabrg.o
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/dma/dma-api.c b/src/kernel/linux/v4.14/arch/sh/drivers/dma/dma-api.c
new file mode 100644
index 0000000..c0eec08
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/dma/dma-api.c
@@ -0,0 +1,432 @@
+/*
+ * arch/sh/drivers/dma/dma-api.c
+ *
+ * SuperH-specific DMA management API
+ *
+ * Copyright (C) 2003, 2004, 2005  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <asm/dma.h>
+
+DEFINE_SPINLOCK(dma_spin_lock);
+static LIST_HEAD(registered_dmac_list);
+
+struct dma_info *get_dma_info(unsigned int chan)
+{
+	struct dma_info *info;
+
+	/*
+	 * Look for each DMAC's range to determine who the owner of
+	 * the channel is.
+	 */
+	list_for_each_entry(info, &registered_dmac_list, list) {
+		if ((chan <  info->first_vchannel_nr) ||
+		    (chan >= info->first_vchannel_nr + info->nr_channels))
+			continue;
+
+		return info;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(get_dma_info);
+
+struct dma_info *get_dma_info_by_name(const char *dmac_name)
+{
+	struct dma_info *info;
+
+	list_for_each_entry(info, &registered_dmac_list, list) {
+		if (dmac_name && (strcmp(dmac_name, info->name) != 0))
+			continue;
+		else
+			return info;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(get_dma_info_by_name);
+
+static unsigned int get_nr_channels(void)
+{
+	struct dma_info *info;
+	unsigned int nr = 0;
+
+	if (unlikely(list_empty(&registered_dmac_list)))
+		return nr;
+
+	list_for_each_entry(info, &registered_dmac_list, list)
+		nr += info->nr_channels;
+
+	return nr;
+}
+
+struct dma_channel *get_dma_channel(unsigned int chan)
+{
+	struct dma_info *info = get_dma_info(chan);
+	struct dma_channel *channel;
+	int i;
+
+	if (unlikely(!info))
+		return ERR_PTR(-EINVAL);
+
+	for (i = 0; i < info->nr_channels; i++) {
+		channel = &info->channels[i];
+		if (channel->vchan == chan)
+			return channel;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(get_dma_channel);
+
+int get_dma_residue(unsigned int chan)
+{
+	struct dma_info *info = get_dma_info(chan);
+	struct dma_channel *channel = get_dma_channel(chan);
+
+	if (info->ops->get_residue)
+		return info->ops->get_residue(channel);
+
+	return 0;
+}
+EXPORT_SYMBOL(get_dma_residue);
+
+static int search_cap(const char **haystack, const char *needle)
+{
+	const char **p;
+
+	for (p = haystack; *p; p++)
+		if (strcmp(*p, needle) == 0)
+			return 1;
+
+	return 0;
+}
+
+/**
+ * request_dma_bycap - Allocate a DMA channel based on its capabilities
+ * @dmac: List of DMA controllers to search
+ * @caps: List of capabilities
+ *
+ * Search all channels of all DMA controllers to find a channel which
+ * matches the requested capabilities. The result is the channel
+ * number if a match is found, or %-ENODEV if no match is found.
+ *
+ * Note that not all DMA controllers export capabilities, in which
+ * case they can never be allocated using this API, and so
+ * request_dma() must be used specifying the channel number.
+ */
+int request_dma_bycap(const char **dmac, const char **caps, const char *dev_id)
+{
+	unsigned int found = 0;
+	struct dma_info *info;
+	const char **p;
+	int i;
+
+	BUG_ON(!dmac || !caps);
+
+	list_for_each_entry(info, &registered_dmac_list, list)
+		if (strcmp(*dmac, info->name) == 0) {
+			found = 1;
+			break;
+		}
+
+	if (!found)
+		return -ENODEV;
+
+	for (i = 0; i < info->nr_channels; i++) {
+		struct dma_channel *channel = &info->channels[i];
+
+		if (unlikely(!channel->caps))
+			continue;
+
+		for (p = caps; *p; p++) {
+			if (!search_cap(channel->caps, *p))
+				break;
+			if (request_dma(channel->chan, dev_id) == 0)
+				return channel->chan;
+		}
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(request_dma_bycap);
+
+int dmac_search_free_channel(const char *dev_id)
+{
+	struct dma_channel *channel = { 0 };
+	struct dma_info *info = get_dma_info(0);
+	int i;
+
+	for (i = 0; i < info->nr_channels; i++) {
+		channel = &info->channels[i];
+		if (unlikely(!channel))
+			return -ENODEV;
+
+		if (atomic_read(&channel->busy) == 0)
+			break;
+	}
+
+	if (info->ops->request) {
+		int result = info->ops->request(channel);
+		if (result)
+			return result;
+
+		atomic_set(&channel->busy, 1);
+		return channel->chan;
+	}
+
+	return -ENOSYS;
+}
+
+int request_dma(unsigned int chan, const char *dev_id)
+{
+	struct dma_channel *channel = { 0 };
+	struct dma_info *info = get_dma_info(chan);
+	int result;
+
+	channel = get_dma_channel(chan);
+	if (atomic_xchg(&channel->busy, 1))
+		return -EBUSY;
+
+	strlcpy(channel->dev_id, dev_id, sizeof(channel->dev_id));
+
+	if (info->ops->request) {
+		result = info->ops->request(channel);
+		if (result)
+			atomic_set(&channel->busy, 0);
+
+		return result;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(request_dma);
+
+void free_dma(unsigned int chan)
+{
+	struct dma_info *info = get_dma_info(chan);
+	struct dma_channel *channel = get_dma_channel(chan);
+
+	if (info->ops->free)
+		info->ops->free(channel);
+
+	atomic_set(&channel->busy, 0);
+}
+EXPORT_SYMBOL(free_dma);
+
+void dma_wait_for_completion(unsigned int chan)
+{
+	struct dma_info *info = get_dma_info(chan);
+	struct dma_channel *channel = get_dma_channel(chan);
+
+	if (channel->flags & DMA_TEI_CAPABLE) {
+		wait_event(channel->wait_queue,
+			   (info->ops->get_residue(channel) == 0));
+		return;
+	}
+
+	while (info->ops->get_residue(channel))
+		cpu_relax();
+}
+EXPORT_SYMBOL(dma_wait_for_completion);
+
+int register_chan_caps(const char *dmac, struct dma_chan_caps *caps)
+{
+	struct dma_info *info;
+	unsigned int found = 0;
+	int i;
+
+	list_for_each_entry(info, &registered_dmac_list, list)
+		if (strcmp(dmac, info->name) == 0) {
+			found = 1;
+			break;
+		}
+
+	if (unlikely(!found))
+		return -ENODEV;
+
+	for (i = 0; i < info->nr_channels; i++, caps++) {
+		struct dma_channel *channel;
+
+		if ((info->first_channel_nr + i) != caps->ch_num)
+			return -EINVAL;
+
+		channel = &info->channels[i];
+		channel->caps = caps->caplist;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(register_chan_caps);
+
+void dma_configure_channel(unsigned int chan, unsigned long flags)
+{
+	struct dma_info *info = get_dma_info(chan);
+	struct dma_channel *channel = get_dma_channel(chan);
+
+	if (info->ops->configure)
+		info->ops->configure(channel, flags);
+}
+EXPORT_SYMBOL(dma_configure_channel);
+
+int dma_xfer(unsigned int chan, unsigned long from,
+	     unsigned long to, size_t size, unsigned int mode)
+{
+	struct dma_info *info = get_dma_info(chan);
+	struct dma_channel *channel = get_dma_channel(chan);
+
+	channel->sar	= from;
+	channel->dar	= to;
+	channel->count	= size;
+	channel->mode	= mode;
+
+	return info->ops->xfer(channel);
+}
+EXPORT_SYMBOL(dma_xfer);
+
+int dma_extend(unsigned int chan, unsigned long op, void *param)
+{
+	struct dma_info *info = get_dma_info(chan);
+	struct dma_channel *channel = get_dma_channel(chan);
+
+	if (info->ops->extend)
+		return info->ops->extend(channel, op, param);
+
+	return -ENOSYS;
+}
+EXPORT_SYMBOL(dma_extend);
+
+static int dma_proc_show(struct seq_file *m, void *v)
+{
+	struct dma_info *info = v;
+
+	if (list_empty(&registered_dmac_list))
+		return 0;
+
+	/*
+	 * Iterate over each registered DMAC
+	 */
+	list_for_each_entry(info, &registered_dmac_list, list) {
+		int i;
+
+		/*
+		 * Iterate over each channel
+		 */
+		for (i = 0; i < info->nr_channels; i++) {
+			struct dma_channel *channel = info->channels + i;
+
+			if (!(channel->flags & DMA_CONFIGURED))
+				continue;
+
+			seq_printf(m, "%2d: %14s    %s\n", i,
+				   info->name, channel->dev_id);
+		}
+	}
+
+	return 0;
+}
+
+static int dma_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dma_proc_show, NULL);
+}
+
+static const struct file_operations dma_proc_fops = {
+	.open		= dma_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+int register_dmac(struct dma_info *info)
+{
+	unsigned int total_channels, i;
+
+	INIT_LIST_HEAD(&info->list);
+
+	printk(KERN_INFO "DMA: Registering %s handler (%d channel%s).\n",
+	       info->name, info->nr_channels, info->nr_channels > 1 ? "s" : "");
+
+	BUG_ON((info->flags & DMAC_CHANNELS_CONFIGURED) && !info->channels);
+
+	info->pdev = platform_device_register_simple(info->name, -1,
+						     NULL, 0);
+	if (IS_ERR(info->pdev))
+		return PTR_ERR(info->pdev);
+
+	/*
+	 * Don't touch pre-configured channels
+	 */
+	if (!(info->flags & DMAC_CHANNELS_CONFIGURED)) {
+		unsigned int size;
+
+		size = sizeof(struct dma_channel) * info->nr_channels;
+
+		info->channels = kzalloc(size, GFP_KERNEL);
+		if (!info->channels)
+			return -ENOMEM;
+	}
+
+	total_channels = get_nr_channels();
+	info->first_vchannel_nr = total_channels;
+	for (i = 0; i < info->nr_channels; i++) {
+		struct dma_channel *chan = &info->channels[i];
+
+		atomic_set(&chan->busy, 0);
+
+		chan->chan  = info->first_channel_nr + i;
+		chan->vchan = info->first_channel_nr + i + total_channels;
+
+		memcpy(chan->dev_id, "Unused", 7);
+
+		if (info->flags & DMAC_CHANNELS_TEI_CAPABLE)
+			chan->flags |= DMA_TEI_CAPABLE;
+
+		init_waitqueue_head(&chan->wait_queue);
+		dma_create_sysfs_files(chan, info);
+	}
+
+	list_add(&info->list, &registered_dmac_list);
+
+	return 0;
+}
+EXPORT_SYMBOL(register_dmac);
+
+void unregister_dmac(struct dma_info *info)
+{
+	unsigned int i;
+
+	for (i = 0; i < info->nr_channels; i++)
+		dma_remove_sysfs_files(info->channels + i, info);
+
+	if (!(info->flags & DMAC_CHANNELS_CONFIGURED))
+		kfree(info->channels);
+
+	list_del(&info->list);
+	platform_device_unregister(info->pdev);
+}
+EXPORT_SYMBOL(unregister_dmac);
+
+static int __init dma_api_init(void)
+{
+	printk(KERN_NOTICE "DMA: Registering DMA API.\n");
+	return proc_create("dma", 0, NULL, &dma_proc_fops) ? 0 : -ENOMEM;
+}
+subsys_initcall(dma_api_init);
+
+MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
+MODULE_DESCRIPTION("DMA API for SuperH");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/dma/dma-g2.c b/src/kernel/linux/v4.14/arch/sh/drivers/dma/dma-g2.c
new file mode 100644
index 0000000..e1ab6eb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/dma/dma-g2.c
@@ -0,0 +1,200 @@
+/*
+ * arch/sh/drivers/dma/dma-g2.c
+ *
+ * G2 bus DMA support
+ *
+ * Copyright (C) 2003 - 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <asm/cacheflush.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
+#include <asm/dma.h>
+
+struct g2_channel {
+	unsigned long g2_addr;		/* G2 bus address */
+	unsigned long root_addr;	/* Root bus (SH-4) address */
+	unsigned long size;		/* Size (in bytes), 32-byte aligned */
+	unsigned long direction;	/* Transfer direction */
+	unsigned long ctrl;		/* Transfer control */
+	unsigned long chan_enable;	/* Channel enable */
+	unsigned long xfer_enable;	/* Transfer enable */
+	unsigned long xfer_stat;	/* Transfer status */
+} __attribute__ ((aligned(32)));
+
+struct g2_status {
+	unsigned long g2_addr;
+	unsigned long root_addr;
+	unsigned long size;
+	unsigned long status;
+} __attribute__ ((aligned(16)));
+
+struct g2_dma_info {
+	struct g2_channel channel[G2_NR_DMA_CHANNELS];
+	unsigned long pad1[G2_NR_DMA_CHANNELS];
+	unsigned long wait_state;
+	unsigned long pad2[10];
+	unsigned long magic;
+	struct g2_status status[G2_NR_DMA_CHANNELS];
+} __attribute__ ((aligned(256)));
+
+static volatile struct g2_dma_info *g2_dma = (volatile struct g2_dma_info *)0xa05f7800;
+
+#define g2_bytes_remaining(i) \
+	((g2_dma->channel[i].size - \
+	  g2_dma->status[i].size) & 0x0fffffff)
+
+static irqreturn_t g2_dma_interrupt(int irq, void *dev_id)
+{
+	int i;
+
+	for (i = 0; i < G2_NR_DMA_CHANNELS; i++) {
+		if (g2_dma->status[i].status & 0x20000000) {
+			unsigned int bytes = g2_bytes_remaining(i);
+
+			if (likely(bytes == 0)) {
+				struct dma_info *info = dev_id;
+				struct dma_channel *chan = info->channels + i;
+
+				wake_up(&chan->wait_queue);
+
+				return IRQ_HANDLED;
+			}
+		}
+	}
+
+	return IRQ_NONE;
+}
+
+static int g2_enable_dma(struct dma_channel *chan)
+{
+	unsigned int chan_nr = chan->chan;
+
+	g2_dma->channel[chan_nr].chan_enable = 1;
+	g2_dma->channel[chan_nr].xfer_enable = 1;
+
+	return 0;
+}
+
+static int g2_disable_dma(struct dma_channel *chan)
+{
+	unsigned int chan_nr = chan->chan;
+
+	g2_dma->channel[chan_nr].chan_enable = 0;
+	g2_dma->channel[chan_nr].xfer_enable = 0;
+
+	return 0;
+}
+
+static int g2_xfer_dma(struct dma_channel *chan)
+{
+	unsigned int chan_nr = chan->chan;
+
+	if (chan->sar & 31) {
+		printk("g2dma: unaligned source 0x%lx\n", chan->sar);
+		return -EINVAL;
+	}
+
+	if (chan->dar & 31) {
+		printk("g2dma: unaligned dest 0x%lx\n", chan->dar);
+		return -EINVAL;
+	}
+
+	/* Align the count */
+	if (chan->count & 31)
+		chan->count = (chan->count + (32 - 1)) & ~(32 - 1);
+
+	/* Fixup destination */
+	chan->dar += 0xa0800000;
+
+	/* Fixup direction */
+	chan->mode = !chan->mode;
+
+	flush_icache_range((unsigned long)chan->sar, chan->count);
+
+	g2_disable_dma(chan);
+
+	g2_dma->channel[chan_nr].g2_addr   = chan->dar & 0x1fffffe0;
+	g2_dma->channel[chan_nr].root_addr = chan->sar & 0x1fffffe0;
+	g2_dma->channel[chan_nr].size	   = (chan->count & ~31) | 0x80000000;
+	g2_dma->channel[chan_nr].direction = chan->mode;
+
+	/*
+	 * bit 0 - ???
+	 * bit 1 - if set, generate a hardware event on transfer completion
+	 * bit 2 - ??? something to do with suspend?
+	 */
+	g2_dma->channel[chan_nr].ctrl	= 5; /* ?? */
+
+	g2_enable_dma(chan);
+
+	/* debug cruft */
+	pr_debug("count, sar, dar, mode, ctrl, chan, xfer: %ld, 0x%08lx, "
+		 "0x%08lx, %ld, %ld, %ld, %ld\n",
+		 g2_dma->channel[chan_nr].size,
+		 g2_dma->channel[chan_nr].root_addr,
+		 g2_dma->channel[chan_nr].g2_addr,
+		 g2_dma->channel[chan_nr].direction,
+		 g2_dma->channel[chan_nr].ctrl,
+		 g2_dma->channel[chan_nr].chan_enable,
+		 g2_dma->channel[chan_nr].xfer_enable);
+
+	return 0;
+}
+
+static int g2_get_residue(struct dma_channel *chan)
+{
+	return g2_bytes_remaining(chan->chan);
+}
+
+static struct dma_ops g2_dma_ops = {
+	.xfer		= g2_xfer_dma,
+	.get_residue	= g2_get_residue,
+};
+
+static struct dma_info g2_dma_info = {
+	.name		= "g2_dmac",
+	.nr_channels	= 4,
+	.ops		= &g2_dma_ops,
+	.flags		= DMAC_CHANNELS_TEI_CAPABLE,
+};
+
+static int __init g2_dma_init(void)
+{
+	int ret;
+
+	ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, 0,
+			  "g2 DMA handler", &g2_dma_info);
+	if (unlikely(ret))
+		return -EINVAL;
+
+	/* Magic */
+	g2_dma->wait_state	= 27;
+	g2_dma->magic		= 0x4659404f;
+
+	ret = register_dmac(&g2_dma_info);
+	if (unlikely(ret != 0))
+		free_irq(HW_EVENT_G2_DMA, &g2_dma_info);
+
+	return ret;
+}
+
+static void __exit g2_dma_exit(void)
+{
+	free_irq(HW_EVENT_G2_DMA, &g2_dma_info);
+	unregister_dmac(&g2_dma_info);
+}
+
+subsys_initcall(g2_dma_init);
+module_exit(g2_dma_exit);
+
+MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
+MODULE_DESCRIPTION("G2 bus DMA driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/dma/dma-pvr2.c b/src/kernel/linux/v4.14/arch/sh/drivers/dma/dma-pvr2.c
new file mode 100644
index 0000000..706a343
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/dma/dma-pvr2.c
@@ -0,0 +1,108 @@
+/*
+ * arch/sh/drivers/dma/dma-pvr2.c
+ *
+ * NEC PowerVR 2 (Dreamcast) DMA support
+ *
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+
+static unsigned int xfer_complete;
+static int count;
+
+static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id)
+{
+	if (get_dma_residue(PVR2_CASCADE_CHAN)) {
+		printk(KERN_WARNING "DMA: SH DMAC did not complete transfer "
+		       "on channel %d, waiting..\n", PVR2_CASCADE_CHAN);
+		dma_wait_for_completion(PVR2_CASCADE_CHAN);
+	}
+
+	if (count++ < 10)
+		pr_debug("Got a pvr2 dma interrupt for channel %d\n",
+			 irq - HW_EVENT_PVR2_DMA);
+
+	xfer_complete = 1;
+
+	return IRQ_HANDLED;
+}
+
+static int pvr2_request_dma(struct dma_channel *chan)
+{
+	if (__raw_readl(PVR2_DMA_MODE) != 0)
+		return -EBUSY;
+
+	__raw_writel(0, PVR2_DMA_LMMODE0);
+
+	return 0;
+}
+
+static int pvr2_get_dma_residue(struct dma_channel *chan)
+{
+	return xfer_complete == 0;
+}
+
+static int pvr2_xfer_dma(struct dma_channel *chan)
+{
+	if (chan->sar || !chan->dar)
+		return -EINVAL;
+
+	xfer_complete = 0;
+
+	__raw_writel(chan->dar, PVR2_DMA_ADDR);
+	__raw_writel(chan->count, PVR2_DMA_COUNT);
+	__raw_writel(chan->mode & DMA_MODE_MASK, PVR2_DMA_MODE);
+
+	return 0;
+}
+
+static struct irqaction pvr2_dma_irq = {
+	.name		= "pvr2 DMA handler",
+	.handler	= pvr2_dma_interrupt,
+};
+
+static struct dma_ops pvr2_dma_ops = {
+	.request	= pvr2_request_dma,
+	.get_residue	= pvr2_get_dma_residue,
+	.xfer		= pvr2_xfer_dma,
+};
+
+static struct dma_info pvr2_dma_info = {
+	.name		= "pvr2_dmac",
+	.nr_channels	= 1,
+	.ops		= &pvr2_dma_ops,
+	.flags		= DMAC_CHANNELS_TEI_CAPABLE,
+};
+
+static int __init pvr2_dma_init(void)
+{
+	setup_irq(HW_EVENT_PVR2_DMA, &pvr2_dma_irq);
+	request_dma(PVR2_CASCADE_CHAN, "pvr2 cascade");
+
+	return register_dmac(&pvr2_dma_info);
+}
+
+static void __exit pvr2_dma_exit(void)
+{
+	free_dma(PVR2_CASCADE_CHAN);
+	free_irq(HW_EVENT_PVR2_DMA, 0);
+	unregister_dmac(&pvr2_dma_info);
+}
+
+subsys_initcall(pvr2_dma_init);
+module_exit(pvr2_dma_exit);
+
+MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
+MODULE_DESCRIPTION("NEC PowerVR 2 DMA driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/dma/dma-sh.c b/src/kernel/linux/v4.14/arch/sh/drivers/dma/dma-sh.c
new file mode 100644
index 0000000..afde2a7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/dma/dma-sh.c
@@ -0,0 +1,417 @@
+/*
+ * arch/sh/drivers/dma/dma-sh.c
+ *
+ * SuperH On-chip DMAC Support
+ *
+ * Copyright (C) 2000 Takashi YOSHII
+ * Copyright (C) 2003, 2004 Paul Mundt
+ * Copyright (C) 2005 Andriy Skulysh
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach-dreamcast/mach/dma.h>
+#include <asm/dma.h>
+#include <asm/dma-register.h>
+#include <cpu/dma-register.h>
+#include <cpu/dma.h>
+
+/*
+ * Define the default configuration for dual address memory-memory transfer.
+ * The 0x400 value represents auto-request, external->external.
+ */
+#define RS_DUAL	(DM_INC | SM_INC | RS_AUTO | TS_INDEX2VAL(XMIT_SZ_32BIT))
+
+static unsigned long dma_find_base(unsigned int chan)
+{
+	unsigned long base = SH_DMAC_BASE0;
+
+#ifdef SH_DMAC_BASE1
+	if (chan >= 6)
+		base = SH_DMAC_BASE1;
+#endif
+
+	return base;
+}
+
+static unsigned long dma_base_addr(unsigned int chan)
+{
+	unsigned long base = dma_find_base(chan);
+
+	/* Normalize offset calculation */
+	if (chan >= 9)
+		chan -= 6;
+	if (chan >= 4)
+		base += 0x10;
+
+	return base + (chan * 0x10);
+}
+
+#ifdef CONFIG_SH_DMA_IRQ_MULTI
+static inline unsigned int get_dmte_irq(unsigned int chan)
+{
+	return chan >= 6 ? DMTE6_IRQ : DMTE0_IRQ;
+}
+#else
+
+static unsigned int dmte_irq_map[] = {
+	DMTE0_IRQ, DMTE0_IRQ + 1, DMTE0_IRQ + 2, DMTE0_IRQ + 3,
+
+#ifdef DMTE4_IRQ
+	DMTE4_IRQ, DMTE4_IRQ + 1,
+#endif
+
+#ifdef DMTE6_IRQ
+	DMTE6_IRQ, DMTE6_IRQ + 1,
+#endif
+
+#ifdef DMTE8_IRQ
+	DMTE8_IRQ, DMTE9_IRQ, DMTE10_IRQ, DMTE11_IRQ,
+#endif
+};
+
+static inline unsigned int get_dmte_irq(unsigned int chan)
+{
+	return dmte_irq_map[chan];
+}
+#endif
+
+/*
+ * We determine the correct shift size based off of the CHCR transmit size
+ * for the given channel. Since we know that it will take:
+ *
+ *	info->count >> ts_shift[transmit_size]
+ *
+ * iterations to complete the transfer.
+ */
+static unsigned int ts_shift[] = TS_SHIFT;
+
+static inline unsigned int calc_xmit_shift(struct dma_channel *chan)
+{
+	u32 chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
+	int cnt = ((chcr & CHCR_TS_LOW_MASK) >> CHCR_TS_LOW_SHIFT) |
+		((chcr & CHCR_TS_HIGH_MASK) >> CHCR_TS_HIGH_SHIFT);
+
+	return ts_shift[cnt];
+}
+
+/*
+ * The transfer end interrupt must read the chcr register to end the
+ * hardware interrupt active condition.
+ * Besides that it needs to waken any waiting process, which should handle
+ * setting up the next transfer.
+ */
+static irqreturn_t dma_tei(int irq, void *dev_id)
+{
+	struct dma_channel *chan = dev_id;
+	u32 chcr;
+
+	chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
+
+	if (!(chcr & CHCR_TE))
+		return IRQ_NONE;
+
+	chcr &= ~(CHCR_IE | CHCR_DE);
+	__raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
+
+	wake_up(&chan->wait_queue);
+
+	return IRQ_HANDLED;
+}
+
+static int sh_dmac_request_dma(struct dma_channel *chan)
+{
+	if (unlikely(!(chan->flags & DMA_TEI_CAPABLE)))
+		return 0;
+
+	return request_irq(get_dmte_irq(chan->chan), dma_tei, IRQF_SHARED,
+			   chan->dev_id, chan);
+}
+
+static void sh_dmac_free_dma(struct dma_channel *chan)
+{
+	free_irq(get_dmte_irq(chan->chan), chan);
+}
+
+static int
+sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
+{
+	if (!chcr)
+		chcr = RS_DUAL | CHCR_IE;
+
+	if (chcr & CHCR_IE) {
+		chcr &= ~CHCR_IE;
+		chan->flags |= DMA_TEI_CAPABLE;
+	} else {
+		chan->flags &= ~DMA_TEI_CAPABLE;
+	}
+
+	__raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
+
+	chan->flags |= DMA_CONFIGURED;
+	return 0;
+}
+
+static void sh_dmac_enable_dma(struct dma_channel *chan)
+{
+	int irq;
+	u32 chcr;
+
+	chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
+	chcr |= CHCR_DE;
+
+	if (chan->flags & DMA_TEI_CAPABLE)
+		chcr |= CHCR_IE;
+
+	__raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
+
+	if (chan->flags & DMA_TEI_CAPABLE) {
+		irq = get_dmte_irq(chan->chan);
+		enable_irq(irq);
+	}
+}
+
+static void sh_dmac_disable_dma(struct dma_channel *chan)
+{
+	int irq;
+	u32 chcr;
+
+	if (chan->flags & DMA_TEI_CAPABLE) {
+		irq = get_dmte_irq(chan->chan);
+		disable_irq(irq);
+	}
+
+	chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
+	chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
+	__raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
+}
+
+static int sh_dmac_xfer_dma(struct dma_channel *chan)
+{
+	/*
+	 * If we haven't pre-configured the channel with special flags, use
+	 * the defaults.
+	 */
+	if (unlikely(!(chan->flags & DMA_CONFIGURED)))
+		sh_dmac_configure_channel(chan, 0);
+
+	sh_dmac_disable_dma(chan);
+
+	/*
+	 * Single-address mode usage note!
+	 *
+	 * It's important that we don't accidentally write any value to SAR/DAR
+	 * (this includes 0) that hasn't been directly specified by the user if
+	 * we're in single-address mode.
+	 *
+	 * In this case, only one address can be defined, anything else will
+	 * result in a DMA address error interrupt (at least on the SH-4),
+	 * which will subsequently halt the transfer.
+	 *
+	 * Channel 2 on the Dreamcast is a special case, as this is used for
+	 * cascading to the PVR2 DMAC. In this case, we still need to write
+	 * SAR and DAR, regardless of value, in order for cascading to work.
+	 */
+	if (chan->sar || (mach_is_dreamcast() &&
+			  chan->chan == PVR2_CASCADE_CHAN))
+		__raw_writel(chan->sar, (dma_base_addr(chan->chan) + SAR));
+	if (chan->dar || (mach_is_dreamcast() &&
+			  chan->chan == PVR2_CASCADE_CHAN))
+		__raw_writel(chan->dar, (dma_base_addr(chan->chan) + DAR));
+
+	__raw_writel(chan->count >> calc_xmit_shift(chan),
+		(dma_base_addr(chan->chan) + TCR));
+
+	sh_dmac_enable_dma(chan);
+
+	return 0;
+}
+
+static int sh_dmac_get_dma_residue(struct dma_channel *chan)
+{
+	if (!(__raw_readl(dma_base_addr(chan->chan) + CHCR) & CHCR_DE))
+		return 0;
+
+	return __raw_readl(dma_base_addr(chan->chan) + TCR)
+		 << calc_xmit_shift(chan);
+}
+
+/*
+ * DMAOR handling
+ */
+#if defined(CONFIG_CPU_SUBTYPE_SH7723)	|| \
+    defined(CONFIG_CPU_SUBTYPE_SH7724)	|| \
+    defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
+    defined(CONFIG_CPU_SUBTYPE_SH7785)
+#define NR_DMAOR	2
+#else
+#define NR_DMAOR	1
+#endif
+
+/*
+ * DMAOR bases are broken out amongst channel groups. DMAOR0 manages
+ * channels 0 - 5, DMAOR1 6 - 11 (optional).
+ */
+#define dmaor_read_reg(n)		__raw_readw(dma_find_base((n)*6))
+#define dmaor_write_reg(n, data)	__raw_writew(data, dma_find_base(n)*6)
+
+static inline int dmaor_reset(int no)
+{
+	unsigned long dmaor = dmaor_read_reg(no);
+
+	/* Try to clear the error flags first, incase they are set */
+	dmaor &= ~(DMAOR_NMIF | DMAOR_AE);
+	dmaor_write_reg(no, dmaor);
+
+	dmaor |= DMAOR_INIT;
+	dmaor_write_reg(no, dmaor);
+
+	/* See if we got an error again */
+	if ((dmaor_read_reg(no) & (DMAOR_AE | DMAOR_NMIF))) {
+		printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * DMAE handling
+ */
+#ifdef CONFIG_CPU_SH4
+
+#if defined(DMAE1_IRQ)
+#define NR_DMAE		2
+#else
+#define NR_DMAE		1
+#endif
+
+static const char *dmae_name[] = {
+	"DMAC Address Error0",
+	"DMAC Address Error1"
+};
+
+#ifdef CONFIG_SH_DMA_IRQ_MULTI
+static inline unsigned int get_dma_error_irq(int n)
+{
+	return get_dmte_irq(n * 6);
+}
+#else
+
+static unsigned int dmae_irq_map[] = {
+	DMAE0_IRQ,
+
+#ifdef DMAE1_IRQ
+	DMAE1_IRQ,
+#endif
+};
+
+static inline unsigned int get_dma_error_irq(int n)
+{
+	return dmae_irq_map[n];
+}
+#endif
+
+static irqreturn_t dma_err(int irq, void *dummy)
+{
+	int i;
+
+	for (i = 0; i < NR_DMAOR; i++)
+		dmaor_reset(i);
+
+	disable_irq(irq);
+
+	return IRQ_HANDLED;
+}
+
+static int dmae_irq_init(void)
+{
+	int n;
+
+	for (n = 0; n < NR_DMAE; n++) {
+		int i = request_irq(get_dma_error_irq(n), dma_err,
+				    IRQF_SHARED, dmae_name[n], (void *)dmae_name[n]);
+		if (unlikely(i < 0)) {
+			printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]);
+			return i;
+		}
+	}
+
+	return 0;
+}
+
+static void dmae_irq_free(void)
+{
+	int n;
+
+	for (n = 0; n < NR_DMAE; n++)
+		free_irq(get_dma_error_irq(n), NULL);
+}
+#else
+static inline int dmae_irq_init(void)
+{
+	return 0;
+}
+
+static void dmae_irq_free(void)
+{
+}
+#endif
+
+static struct dma_ops sh_dmac_ops = {
+	.request	= sh_dmac_request_dma,
+	.free		= sh_dmac_free_dma,
+	.get_residue	= sh_dmac_get_dma_residue,
+	.xfer		= sh_dmac_xfer_dma,
+	.configure	= sh_dmac_configure_channel,
+};
+
+static struct dma_info sh_dmac_info = {
+	.name		= "sh_dmac",
+	.nr_channels	= CONFIG_NR_ONCHIP_DMA_CHANNELS,
+	.ops		= &sh_dmac_ops,
+	.flags		= DMAC_CHANNELS_TEI_CAPABLE,
+};
+
+static int __init sh_dmac_init(void)
+{
+	struct dma_info *info = &sh_dmac_info;
+	int i, rc;
+
+	/*
+	 * Initialize DMAE, for parts that support it.
+	 */
+	rc = dmae_irq_init();
+	if (unlikely(rc != 0))
+		return rc;
+
+	/*
+	 * Initialize DMAOR, and clean up any error flags that may have
+	 * been set.
+	 */
+	for (i = 0; i < NR_DMAOR; i++) {
+		rc = dmaor_reset(i);
+		if (unlikely(rc != 0))
+			return rc;
+	}
+
+	return register_dmac(info);
+}
+
+static void __exit sh_dmac_exit(void)
+{
+	dmae_irq_free();
+	unregister_dmac(&sh_dmac_info);
+}
+
+subsys_initcall(sh_dmac_init);
+module_exit(sh_dmac_exit);
+
+MODULE_AUTHOR("Takashi YOSHII, Paul Mundt, Andriy Skulysh");
+MODULE_DESCRIPTION("SuperH On-Chip DMAC Support");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/dma/dma-sysfs.c b/src/kernel/linux/v4.14/arch/sh/drivers/dma/dma-sysfs.c
new file mode 100644
index 0000000..4b15fed
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/dma/dma-sysfs.c
@@ -0,0 +1,167 @@
+/*
+ * arch/sh/drivers/dma/dma-sysfs.c
+ *
+ * sysfs interface for SH DMA API
+ *
+ * Copyright (C) 2004 - 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/stat.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <asm/dma.h>
+
+static struct bus_type dma_subsys = {
+	.name = "dma",
+	.dev_name = "dma",
+};
+
+static ssize_t dma_show_devices(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	ssize_t len = 0;
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		struct dma_info *info = get_dma_info(i);
+		struct dma_channel *channel = get_dma_channel(i);
+
+		if (unlikely(!info) || !channel)
+			continue;
+
+		len += sprintf(buf + len, "%2d: %14s    %s\n",
+			       channel->chan, info->name,
+			       channel->dev_id);
+	}
+
+	return len;
+}
+
+static DEVICE_ATTR(devices, S_IRUGO, dma_show_devices, NULL);
+
+static int __init dma_subsys_init(void)
+{
+	int ret;
+
+	ret = subsys_system_register(&dma_subsys, NULL);
+	if (unlikely(ret))
+		return ret;
+
+	return device_create_file(dma_subsys.dev_root, &dev_attr_devices);
+}
+postcore_initcall(dma_subsys_init);
+
+static ssize_t dma_show_dev_id(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct dma_channel *channel = to_dma_channel(dev);
+	return sprintf(buf, "%s\n", channel->dev_id);
+}
+
+static ssize_t dma_store_dev_id(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct dma_channel *channel = to_dma_channel(dev);
+	strcpy(channel->dev_id, buf);
+	return count;
+}
+
+static DEVICE_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id);
+
+static ssize_t dma_store_config(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct dma_channel *channel = to_dma_channel(dev);
+	unsigned long config;
+
+	config = simple_strtoul(buf, NULL, 0);
+	dma_configure_channel(channel->vchan, config);
+
+	return count;
+}
+
+static DEVICE_ATTR(config, S_IWUSR, NULL, dma_store_config);
+
+static ssize_t dma_show_mode(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct dma_channel *channel = to_dma_channel(dev);
+	return sprintf(buf, "0x%08x\n", channel->mode);
+}
+
+static ssize_t dma_store_mode(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct dma_channel *channel = to_dma_channel(dev);
+	channel->mode = simple_strtoul(buf, NULL, 0);
+	return count;
+}
+
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode);
+
+#define dma_ro_attr(field, fmt)						\
+static ssize_t dma_show_##field(struct device *dev,		\
+				struct device_attribute *attr, char *buf)\
+{									\
+	struct dma_channel *channel = to_dma_channel(dev);		\
+	return sprintf(buf, fmt, channel->field);			\
+}									\
+static DEVICE_ATTR(field, S_IRUGO, dma_show_##field, NULL);
+
+dma_ro_attr(count, "0x%08x\n");
+dma_ro_attr(flags, "0x%08lx\n");
+
+int dma_create_sysfs_files(struct dma_channel *chan, struct dma_info *info)
+{
+	struct device *dev = &chan->dev;
+	char name[16];
+	int ret;
+
+	dev->id  = chan->vchan;
+	dev->bus = &dma_subsys;
+
+	ret = device_register(dev);
+	if (ret)
+		return ret;
+
+	ret |= device_create_file(dev, &dev_attr_dev_id);
+	ret |= device_create_file(dev, &dev_attr_count);
+	ret |= device_create_file(dev, &dev_attr_mode);
+	ret |= device_create_file(dev, &dev_attr_flags);
+	ret |= device_create_file(dev, &dev_attr_config);
+
+	if (unlikely(ret)) {
+		dev_err(&info->pdev->dev, "Failed creating attrs\n");
+		return ret;
+	}
+
+	snprintf(name, sizeof(name), "dma%d", chan->chan);
+	return sysfs_create_link(&info->pdev->dev.kobj, &dev->kobj, name);
+}
+
+void dma_remove_sysfs_files(struct dma_channel *chan, struct dma_info *info)
+{
+	struct device *dev = &chan->dev;
+	char name[16];
+
+	device_remove_file(dev, &dev_attr_dev_id);
+	device_remove_file(dev, &dev_attr_count);
+	device_remove_file(dev, &dev_attr_mode);
+	device_remove_file(dev, &dev_attr_flags);
+	device_remove_file(dev, &dev_attr_config);
+
+	snprintf(name, sizeof(name), "dma%d", chan->chan);
+	sysfs_remove_link(&info->pdev->dev.kobj, name);
+
+	device_unregister(dev);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/dma/dmabrg.c b/src/kernel/linux/v4.14/arch/sh/drivers/dma/dmabrg.c
new file mode 100644
index 0000000..c0dd904
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/dma/dmabrg.c
@@ -0,0 +1,197 @@
+/*
+ * SH7760 DMABRG IRQ handling
+ *
+ * (c) 2007 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com>
+ *  licensed under the GPLv2.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <asm/dma.h>
+#include <asm/dmabrg.h>
+#include <asm/io.h>
+
+/*
+ * The DMABRG is a special DMA unit within the SH7760. It does transfers
+ * from USB-SRAM/Audio units to main memory (and also the LCDC; but that
+ * part is sensibly placed  in the LCDC  registers and requires no irqs)
+ * It has 3 IRQ lines which trigger 10 events, and works independently
+ * from the traditional SH DMAC (although it blocks usage of DMAC 0)
+ *
+ * BRGIRQID   | component | dir | meaning      | source
+ * -----------------------------------------------------
+ *     0      | USB-DMA   | ... | xfer done    | DMABRGI1
+ *     1      | USB-UAE   | ... | USB addr err.| DMABRGI0
+ *     2      | HAC0/SSI0 | play| all done     | DMABRGI1
+ *     3      | HAC0/SSI0 | play| half done    | DMABRGI2
+ *     4      | HAC0/SSI0 | rec | all done     | DMABRGI1
+ *     5      | HAC0/SSI0 | rec | half done    | DMABRGI2
+ *     6      | HAC1/SSI1 | play| all done     | DMABRGI1
+ *     7      | HAC1/SSI1 | play| half done    | DMABRGI2
+ *     8      | HAC1/SSI1 | rec | all done     | DMABRGI1
+ *     9      | HAC1/SSI1 | rec | half done    | DMABRGI2
+ *
+ * all can be enabled/disabled in the DMABRGCR register,
+ * as well as checked if they occurred.
+ *
+ * DMABRGI0 services  USB  DMA  Address  errors,  but it still must be
+ * enabled/acked in the DMABRGCR register.  USB-DMA complete indicator
+ * is grouped together with the audio buffer end indicators, too bad...
+ *
+ * DMABRGCR:	Bits 31-24: audio-dma ENABLE flags,
+ *		Bits 23-16: audio-dma STATUS flags,
+ *		Bits  9-8:  USB error/xfer ENABLE,
+ *		Bits  1-0:  USB error/xfer STATUS.
+ *	Ack an IRQ by writing 0 to the STATUS flag.
+ *	Mask IRQ by writing 0 to ENABLE flag.
+ *
+ * Usage is almost like with any other IRQ:
+ *  dmabrg_request_irq(BRGIRQID, handler, data)
+ *  dmabrg_free_irq(BRGIRQID)
+ *
+ * handler prototype:  void brgirqhandler(void *data)
+ */
+
+#define DMARSRA		0xfe090000
+#define DMAOR		0xffa00040
+#define DMACHCR0	0xffa0000c
+#define DMABRGCR	0xfe3c0000
+
+#define DMAOR_BRG	0x0000c000
+#define DMAOR_DMEN	0x00000001
+
+#define DMABRGI0	68
+#define DMABRGI1	69
+#define DMABRGI2	70
+
+struct dmabrg_handler {
+	void (*handler)(void *);
+	void *data;
+} *dmabrg_handlers;
+
+static inline void dmabrg_call_handler(int i)
+{
+	dmabrg_handlers[i].handler(dmabrg_handlers[i].data);
+}
+
+/*
+ * main DMABRG irq handler. It acks irqs and then
+ * handles every set and unmasked bit sequentially.
+ * No locking and no validity checks; it should be
+ * as fast as possible (audio!)
+ */
+static irqreturn_t dmabrg_irq(int irq, void *data)
+{
+	unsigned long dcr;
+	unsigned int i;
+
+	dcr = __raw_readl(DMABRGCR);
+	__raw_writel(dcr & ~0x00ff0003, DMABRGCR);	/* ack all */
+	dcr &= dcr >> 8;	/* ignore masked */
+
+	/* USB stuff, get it out of the way first */
+	if (dcr & 1)
+		dmabrg_call_handler(DMABRGIRQ_USBDMA);
+	if (dcr & 2)
+		dmabrg_call_handler(DMABRGIRQ_USBDMAERR);
+
+	/* Audio */
+	dcr >>= 16;
+	while (dcr) {
+		i = __ffs(dcr);
+		dcr &= dcr - 1;
+		dmabrg_call_handler(i + DMABRGIRQ_A0TXF);
+	}
+	return IRQ_HANDLED;
+}
+
+static void dmabrg_disable_irq(unsigned int dmairq)
+{
+	unsigned long dcr;
+	dcr = __raw_readl(DMABRGCR);
+	dcr &= ~(1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
+	__raw_writel(dcr, DMABRGCR);
+}
+
+static void dmabrg_enable_irq(unsigned int dmairq)
+{
+	unsigned long dcr;
+	dcr = __raw_readl(DMABRGCR);
+	dcr |= (1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
+	__raw_writel(dcr, DMABRGCR);
+}
+
+int dmabrg_request_irq(unsigned int dmairq, void(*handler)(void*),
+		       void *data)
+{
+	if ((dmairq > 9) || !handler)
+		return -ENOENT;
+	if (dmabrg_handlers[dmairq].handler)
+		return -EBUSY;
+
+	dmabrg_handlers[dmairq].handler = handler;
+	dmabrg_handlers[dmairq].data = data;
+	
+	dmabrg_enable_irq(dmairq);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dmabrg_request_irq);
+
+void dmabrg_free_irq(unsigned int dmairq)
+{
+	if (likely(dmairq < 10)) {
+		dmabrg_disable_irq(dmairq);
+		dmabrg_handlers[dmairq].handler = NULL;
+		dmabrg_handlers[dmairq].data = NULL;
+	}
+}
+EXPORT_SYMBOL_GPL(dmabrg_free_irq);
+
+static int __init dmabrg_init(void)
+{
+	unsigned long or;
+	int ret;
+
+	dmabrg_handlers = kzalloc(10 * sizeof(struct dmabrg_handler),
+				  GFP_KERNEL);
+	if (!dmabrg_handlers)
+		return -ENOMEM;
+
+#ifdef CONFIG_SH_DMA
+	/* request DMAC channel 0 before anyone else can get it */
+	ret = request_dma(0, "DMAC 0 (DMABRG)");
+	if (ret < 0)
+		printk(KERN_INFO "DMABRG: DMAC ch0 not reserved!\n");
+#endif
+
+	__raw_writel(0, DMABRGCR);
+	__raw_writel(0, DMACHCR0);
+	__raw_writel(0x94000000, DMARSRA);	/* enable DMABRG in DMAC 0 */
+
+	/* enable DMABRG mode, enable the DMAC */
+	or = __raw_readl(DMAOR);
+	__raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
+
+	ret = request_irq(DMABRGI0, dmabrg_irq, 0,
+			"DMABRG USB address error", NULL);
+	if (ret)
+		goto out0;
+
+	ret = request_irq(DMABRGI1, dmabrg_irq, 0,
+			"DMABRG Transfer End", NULL);
+	if (ret)
+		goto out1;
+
+	ret = request_irq(DMABRGI2, dmabrg_irq, 0,
+			"DMABRG Transfer Half", NULL);
+	if (ret == 0)
+		return ret;
+
+	free_irq(DMABRGI1, NULL);
+out1:	free_irq(DMABRGI0, NULL);
+out0:	kfree(dmabrg_handlers);
+	return ret;
+}
+subsys_initcall(dmabrg_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/heartbeat.c b/src/kernel/linux/v4.14/arch/sh/drivers/heartbeat.c
new file mode 100644
index 0000000..c6d9604
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/heartbeat.c
@@ -0,0 +1,155 @@
+/*
+ * Generic heartbeat driver for regular LED banks
+ *
+ * Copyright (C) 2007 - 2010  Paul Mundt
+ *
+ * Most SH reference boards include a number of individual LEDs that can
+ * be independently controlled (either via a pre-defined hardware
+ * function or via the LED class, if desired -- the hardware tends to
+ * encapsulate some of the same "triggers" that the LED class supports,
+ * so there's not too much value in it).
+ *
+ * Additionally, most of these boards also have a LED bank that we've
+ * traditionally used for strobing the load average. This use case is
+ * handled by this driver, rather than giving each LED bit position its
+ * own struct device.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/sched/loadavg.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <asm/heartbeat.h>
+
+#define DRV_NAME "heartbeat"
+#define DRV_VERSION "0.1.2"
+
+static unsigned char default_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
+
+static inline void heartbeat_toggle_bit(struct heartbeat_data *hd,
+					unsigned bit, unsigned int inverted)
+{
+	unsigned int new;
+
+	new = (1 << hd->bit_pos[bit]);
+	if (inverted)
+		new = ~new;
+
+	new &= hd->mask;
+
+	switch (hd->regsize) {
+	case 32:
+		new |= ioread32(hd->base) & ~hd->mask;
+		iowrite32(new, hd->base);
+		break;
+	case 16:
+		new |= ioread16(hd->base) & ~hd->mask;
+		iowrite16(new, hd->base);
+		break;
+	default:
+		new |= ioread8(hd->base) & ~hd->mask;
+		iowrite8(new, hd->base);
+		break;
+	}
+}
+
+static void heartbeat_timer(unsigned long data)
+{
+	struct heartbeat_data *hd = (struct heartbeat_data *)data;
+	static unsigned bit = 0, up = 1;
+
+	heartbeat_toggle_bit(hd, bit, hd->flags & HEARTBEAT_INVERTED);
+
+	bit += up;
+	if ((bit == 0) || (bit == (hd->nr_bits)-1))
+		up = -up;
+
+	mod_timer(&hd->timer, jiffies + (110 - ((300 << FSHIFT) /
+			((avenrun[0] / 5) + (3 << FSHIFT)))));
+}
+
+static int heartbeat_drv_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct heartbeat_data *hd;
+	int i;
+
+	if (unlikely(pdev->num_resources != 1)) {
+		dev_err(&pdev->dev, "invalid number of resources\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(res == NULL)) {
+		dev_err(&pdev->dev, "invalid resource\n");
+		return -EINVAL;
+	}
+
+	if (pdev->dev.platform_data) {
+		hd = pdev->dev.platform_data;
+	} else {
+		hd = kzalloc(sizeof(struct heartbeat_data), GFP_KERNEL);
+		if (unlikely(!hd))
+			return -ENOMEM;
+	}
+
+	hd->base = ioremap_nocache(res->start, resource_size(res));
+	if (unlikely(!hd->base)) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+
+		if (!pdev->dev.platform_data)
+			kfree(hd);
+
+		return -ENXIO;
+	}
+
+	if (!hd->nr_bits) {
+		hd->bit_pos = default_bit_pos;
+		hd->nr_bits = ARRAY_SIZE(default_bit_pos);
+	}
+
+	hd->mask = 0;
+	for (i = 0; i < hd->nr_bits; i++)
+		hd->mask |= (1 << hd->bit_pos[i]);
+
+	if (!hd->regsize) {
+		switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
+		case IORESOURCE_MEM_32BIT:
+			hd->regsize = 32;
+			break;
+		case IORESOURCE_MEM_16BIT:
+			hd->regsize = 16;
+			break;
+		case IORESOURCE_MEM_8BIT:
+		default:
+			hd->regsize = 8;
+			break;
+		}
+	}
+
+	setup_timer(&hd->timer, heartbeat_timer, (unsigned long)hd);
+	platform_set_drvdata(pdev, hd);
+
+	return mod_timer(&hd->timer, jiffies + 1);
+}
+
+static struct platform_driver heartbeat_driver = {
+	.probe		= heartbeat_drv_probe,
+	.driver		= {
+		.name			= DRV_NAME,
+		.suppress_bind_attrs	= true,
+	},
+};
+
+static int __init heartbeat_init(void)
+{
+	printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION);
+	return platform_driver_register(&heartbeat_driver);
+}
+device_initcall(heartbeat_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/Makefile b/src/kernel/linux/v4.14/arch/sh/drivers/pci/Makefile
new file mode 100644
index 0000000..947bfe8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/Makefile
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the PCI specific kernel interface routines under Linux.
+#
+obj-y					+= common.o pci.o
+
+obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= pci-sh7751.o ops-sh4.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7751R)	+= pci-sh7751.o ops-sh4.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7763)	+= pci-sh7780.o ops-sh4.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= pci-sh7780.o ops-sh4.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= pci-sh7780.o ops-sh4.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7786)	+= pcie-sh7786.o ops-sh7786.o
+obj-$(CONFIG_CPU_SH5)			+= pci-sh5.o ops-sh5.o
+
+obj-$(CONFIG_SH_DREAMCAST)		+= ops-dreamcast.o fixups-dreamcast.o \
+					   pci-dreamcast.o
+obj-$(CONFIG_SH_SECUREEDGE5410)		+= fixups-snapgear.o
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= fixups-se7751.o
+obj-$(CONFIG_SH_RTS7751R2D)		+= fixups-rts7751r2d.o
+obj-$(CONFIG_SH_SH03)			+= fixups-sh03.o
+obj-$(CONFIG_SH_HIGHLANDER)		+= fixups-r7780rp.o
+obj-$(CONFIG_SH_SH7785LCR)		+= fixups-r7780rp.o
+obj-$(CONFIG_SH_SDK7786)		+= fixups-sdk7786.o
+obj-$(CONFIG_SH_SDK7780)		+= fixups-sdk7780.o
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= fixups-sdk7780.o
+obj-$(CONFIG_SH_TITAN)			+= fixups-titan.o
+obj-$(CONFIG_SH_LANDISK)		+= fixups-landisk.o
+obj-$(CONFIG_SH_LBOX_RE2)		+= fixups-rts7751r2d.o
+obj-$(CONFIG_SH_CAYMAN)			+= fixups-cayman.o
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/common.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/common.c
new file mode 100644
index 0000000..cae707f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/common.c
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/kernel.h>
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
+	int top_bus, int busnr, int devfn)
+{
+	static struct pci_dev dev;
+	static struct pci_bus bus;
+
+	dev.bus = &bus;
+	dev.sysdata = hose;
+	dev.devfn = devfn;
+	bus.number = busnr;
+	bus.sysdata = hose;
+	bus.ops = hose->pci_ops;
+
+	if(busnr != top_bus)
+		/* Fake a parent bus structure. */
+		bus.parent = &bus;
+	else
+		bus.parent = NULL;
+
+	return &dev;
+}
+
+#define EARLY_PCI_OP(rw, size, type)					\
+int __init early_##rw##_config_##size(struct pci_channel *hose,		\
+	int top_bus, int bus, int devfn, int offset, type value)	\
+{									\
+	return pci_##rw##_config_##size(				\
+		fake_pci_dev(hose, top_bus, bus, devfn),		\
+		offset, value);						\
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+int __init pci_is_66mhz_capable(struct pci_channel *hose,
+				int top_bus, int current_bus)
+{
+	u32 pci_devfn;
+	unsigned short vid;
+	int cap66 = -1;
+	u16 stat;
+
+	printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n");
+
+	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
+		if (PCI_FUNC(pci_devfn))
+			continue;
+		if (early_read_config_word(hose, top_bus, current_bus,
+					   pci_devfn, PCI_VENDOR_ID, &vid) !=
+		    PCIBIOS_SUCCESSFUL)
+			continue;
+		if (vid == 0xffff)
+			continue;
+
+		/* check 66MHz capability */
+		if (cap66 < 0)
+			cap66 = 1;
+		if (cap66) {
+			early_read_config_word(hose, top_bus, current_bus,
+					       pci_devfn, PCI_STATUS, &stat);
+			if (!(stat & PCI_STATUS_66MHZ)) {
+				printk(KERN_DEBUG
+				       "PCI: %02x:%02x not 66MHz capable.\n",
+				       current_bus, pci_devfn);
+				cap66 = 0;
+				break;
+			}
+		}
+	}
+
+	return cap66 > 0;
+}
+
+static void pcibios_enable_err(unsigned long __data)
+{
+	struct pci_channel *hose = (struct pci_channel *)__data;
+
+	del_timer(&hose->err_timer);
+	printk(KERN_DEBUG "PCI: re-enabling error IRQ.\n");
+	enable_irq(hose->err_irq);
+}
+
+static void pcibios_enable_serr(unsigned long __data)
+{
+	struct pci_channel *hose = (struct pci_channel *)__data;
+
+	del_timer(&hose->serr_timer);
+	printk(KERN_DEBUG "PCI: re-enabling system error IRQ.\n");
+	enable_irq(hose->serr_irq);
+}
+
+void pcibios_enable_timers(struct pci_channel *hose)
+{
+	if (hose->err_irq) {
+		init_timer(&hose->err_timer);
+		hose->err_timer.data = (unsigned long)hose;
+		hose->err_timer.function = pcibios_enable_err;
+	}
+
+	if (hose->serr_irq) {
+		init_timer(&hose->serr_timer);
+		hose->serr_timer.data = (unsigned long)hose;
+		hose->serr_timer.function = pcibios_enable_serr;
+	}
+}
+
+/*
+ * A simple handler for the regular PCI status errors, called from IRQ
+ * context.
+ */
+unsigned int pcibios_handle_status_errors(unsigned long addr,
+					  unsigned int status,
+					  struct pci_channel *hose)
+{
+	unsigned int cmd = 0;
+
+	if (status & PCI_STATUS_REC_MASTER_ABORT) {
+		printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n", addr);
+		cmd |= PCI_STATUS_REC_MASTER_ABORT;
+	}
+
+	if (status & PCI_STATUS_REC_TARGET_ABORT) {
+		printk(KERN_DEBUG "PCI: target abort: ");
+		pcibios_report_status(PCI_STATUS_REC_TARGET_ABORT |
+				      PCI_STATUS_SIG_TARGET_ABORT |
+				      PCI_STATUS_REC_MASTER_ABORT, 1);
+		printk("\n");
+
+		cmd |= PCI_STATUS_REC_TARGET_ABORT;
+	}
+
+	if (status & (PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY)) {
+		printk(KERN_DEBUG "PCI: parity error detected: ");
+		pcibios_report_status(PCI_STATUS_PARITY |
+				      PCI_STATUS_DETECTED_PARITY, 1);
+		printk("\n");
+
+		cmd |= PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY;
+
+		/* Now back off of the IRQ for awhile */
+		if (hose->err_irq) {
+			disable_irq_nosync(hose->err_irq);
+			hose->err_timer.expires = jiffies + HZ;
+			add_timer(&hose->err_timer);
+		}
+	}
+
+	return cmd;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-cayman.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-cayman.c
new file mode 100644
index 0000000..c797bfb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-cayman.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <cpu/irq.h>
+#include "pci-sh5.h"
+
+int pcibios_map_platform_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int result = -1;
+
+	/* The complication here is that the PCI IRQ lines from the Cayman's 2
+	   5V slots get into the CPU via a different path from the IRQ lines
+	   from the 3 3.3V slots.  Thus, we have to detect whether the card's
+	   interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling'
+	   at the point where we cross from 5V to 3.3V is not the normal case.
+
+	   The added complication is that we don't know that the 5V slots are
+	   always bus 2, because a card containing a PCI-PCI bridge may be
+	   plugged into a 3.3V slot, and this changes the bus numbering.
+
+	   Also, the Cayman has an intermediate PCI bus that goes a custom
+	   expansion board header (and to the secondary bridge).  This bus has
+	   never been used in practice.
+
+	   The 1ary onboard PCI-PCI bridge is device 3 on bus 0
+	   The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of
+	   the 1ary bridge.
+	   */
+
+	struct slot_pin {
+		int slot;
+		int pin;
+	} path[4];
+	int i=0;
+
+	while (dev->bus->number > 0) {
+
+		slot = path[i].slot = PCI_SLOT(dev->devfn);
+		pin = path[i].pin = pci_swizzle_interrupt_pin(dev, pin);
+		dev = dev->bus->self;
+		i++;
+		if (i > 3) panic("PCI path to root bus too long!\n");
+	}
+
+	slot = PCI_SLOT(dev->devfn);
+	/* This is the slot on bus 0 through which the device is eventually
+	   reachable. */
+
+	/* Now work back up. */
+	if ((slot < 3) || (i == 0)) {
+		/* Bus 0 (incl. PCI-PCI bridge itself) : perform the final
+		   swizzle now. */
+		result = IRQ_INTA + pci_swizzle_interrupt_pin(dev, pin) - 1;
+	} else {
+		i--;
+		slot = path[i].slot;
+		pin  = path[i].pin;
+		if (slot > 0) {
+			panic("PCI expansion bus device found - not handled!\n");
+		} else {
+			if (i > 0) {
+				/* 5V slots */
+				i--;
+				slot = path[i].slot;
+				pin  = path[i].pin;
+				/* 'pin' was swizzled earlier wrt slot, don't do it again. */
+				result = IRQ_P2INTA + (pin - 1);
+			} else {
+				/* IRQ for 2ary PCI-PCI bridge : unused */
+				result = -1;
+			}
+		}
+	}
+
+	return result;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-dreamcast.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-dreamcast.c
new file mode 100644
index 0000000..48aaefd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -0,0 +1,88 @@
+/*
+ * arch/sh/drivers/pci/fixups-dreamcast.c
+ *
+ * PCI fixups for the Sega Dreamcast
+ *
+ * Copyright (C) 2001, 2002  M. R. Brown
+ * Copyright (C) 2002, 2003, 2006  Paul Mundt
+ *
+ * This file originally bore the message (with enclosed-$):
+ *	Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
+ *	Dreamcast PCI: Supports SEGA Broadband Adaptor only.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <mach/pci.h>
+
+static void gapspci_fixup_resources(struct pci_dev *dev)
+{
+	struct pci_channel *p = dev->sysdata;
+	struct resource res;
+	struct pci_bus_region region;
+
+	printk(KERN_NOTICE "PCI: Fixing up device %s\n", pci_name(dev));
+
+	switch (dev->device) {
+	case PCI_DEVICE_ID_SEGA_BBA:
+		/*
+		 * We also assume that dev->devfn == 0
+		 */
+		dev->resource[1].start	= p->resources[0].start  + 0x100;
+		dev->resource[1].end	= dev->resource[1].start + 0x200 - 1;
+
+		/*
+		 * This is not a normal BAR, prevent any attempts to move
+		 * the BAR, as this will result in a bus lock.
+		 */
+		dev->resource[1].flags |= IORESOURCE_PCI_FIXED;
+
+		/*
+		 * Redirect dma memory allocations to special memory window.
+		 *
+		 * If this GAPSPCI region were mapped by a BAR, the CPU
+		 * phys_addr_t would be pci_resource_start(), and the bus
+		 * address would be pci_bus_address(pci_resource_start()).
+		 * But apparently there's no BAR mapping it, so we just
+		 * "know" its CPU address is GAPSPCI_DMA_BASE.
+		 */
+		res.start = GAPSPCI_DMA_BASE;
+		res.end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1;
+		res.flags = IORESOURCE_MEM;
+		pcibios_resource_to_bus(dev->bus, &region, &res);
+		BUG_ON(dma_declare_coherent_memory(&dev->dev,
+						res.start,
+						region.start,
+						resource_size(&res),
+						DMA_MEMORY_EXCLUSIVE));
+		break;
+	default:
+		printk("PCI: Failed resource fixup\n");
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, gapspci_fixup_resources);
+
+int pcibios_map_platform_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	/*
+	 * The interrupt routing semantics here are quite trivial.
+	 *
+	 * We basically only support one interrupt, so we only bother
+	 * updating a device's interrupt line with this single shared
+	 * interrupt. Keeps routing quite simple, doesn't it?
+	 */
+	return GAPSPCI_IRQ;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-landisk.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-landisk.c
new file mode 100644
index 0000000..db5b40a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-landisk.c
@@ -0,0 +1,59 @@
+/*
+ * arch/sh/drivers/pci/fixups-landisk.c
+ *
+ * PCI initialization for the I-O DATA Device, Inc. LANDISK board
+ *
+ * Copyright (C) 2006 kogiidena
+ * Copyright (C) 2010 Nobuhiro Iwamatsu
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/sh_intc.h>
+#include "pci-sh4.h"
+
+#define PCIMCR_MRSET_OFF	0xBFFFFFFF
+#define PCIMCR_RFSH_OFF		0xFFFFFFFB
+
+int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	/*
+	 * slot0: pin1-4 = irq5,6,7,8
+	 * slot1: pin1-4 = irq6,7,8,5
+	 * slot2: pin1-4 = irq7,8,5,6
+	 * slot3: pin1-4 = irq8,5,6,7
+	 */
+	int irq = ((slot + pin - 1) & 0x3) + evt2irq(0x2a0);
+
+	if ((slot | (pin - 1)) > 0x3) {
+		printk(KERN_WARNING "PCI: Bad IRQ mapping request for slot %d pin %c\n",
+		       slot, pin - 1 + 'A');
+		return -1;
+	}
+	return irq;
+}
+
+int pci_fixup_pcic(struct pci_channel *chan)
+{
+	unsigned long bcr1, mcr;
+
+	bcr1 = __raw_readl(SH7751_BCR1);
+	bcr1 |= 0x40080000;	/* Enable Bit 19 BREQEN, set PCIC to slave */
+	pci_write_reg(chan, bcr1, SH4_PCIBCR1);
+
+	mcr = __raw_readl(SH7751_MCR);
+	mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
+	pci_write_reg(chan, mcr, SH4_PCIMCR);
+
+	pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5);
+	pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6);
+	pci_write_reg(chan, 0x0c000000, SH4_PCILAR0);
+	pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
+
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-r7780rp.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-r7780rp.c
new file mode 100644
index 0000000..2c9b58f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-r7780rp.c
@@ -0,0 +1,21 @@
+/*
+ * arch/sh/drivers/pci/fixups-r7780rp.c
+ *
+ * Highlander R7780RP-1 PCI fixups
+ *
+ * Copyright (C) 2003  Lineo uSolutions, Inc.
+ * Copyright (C) 2004 - 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include "pci-sh4.h"
+
+int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	return evt2irq(0xa20) + slot;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-rts7751r2d.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-rts7751r2d.c
new file mode 100644
index 0000000..358ac10
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-rts7751r2d.c
@@ -0,0 +1,67 @@
+/*
+ * arch/sh/drivers/pci/fixups-rts7751r2d.c
+ *
+ * RTS7751R2D / LBOXRE2 PCI fixups
+ *
+ * Copyright (C) 2003  Lineo uSolutions, Inc.
+ * Copyright (C) 2004  Paul Mundt
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include <mach/lboxre2.h>
+#include <mach/r2d.h>
+#include "pci-sh4.h"
+#include <generated/machtypes.h>
+
+#define PCIMCR_MRSET_OFF	0xBFFFFFFF
+#define PCIMCR_RFSH_OFF		0xFFFFFFFB
+
+static u8 rts7751r2d_irq_tab[] = {
+	IRQ_PCI_INTA,
+	IRQ_PCI_INTB,
+	IRQ_PCI_INTC,
+	IRQ_PCI_INTD,
+};
+
+static char lboxre2_irq_tab[] = {
+	IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD,
+};
+
+int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	if (mach_is_lboxre2())
+		return lboxre2_irq_tab[slot];
+	else
+		return rts7751r2d_irq_tab[slot];
+}
+
+int pci_fixup_pcic(struct pci_channel *chan)
+{
+	unsigned long bcr1, mcr;
+
+	bcr1 = __raw_readl(SH7751_BCR1);
+	bcr1 |= 0x40080000;	/* Enable Bit 19 BREQEN, set PCIC to slave */
+	pci_write_reg(chan, bcr1, SH4_PCIBCR1);
+
+	/* Enable all interrupts, so we known what to fix */
+	pci_write_reg(chan, 0x0000c3ff, SH4_PCIINTM);
+	pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
+
+	pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1);
+	pci_write_reg(chan, 0xab000001, SH7751_PCICONF4);
+
+	mcr = __raw_readl(SH7751_MCR);
+	mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
+	pci_write_reg(chan, mcr, SH4_PCIMCR);
+
+	pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5);
+	pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6);
+	pci_write_reg(chan, 0x0c000000, SH4_PCILAR0);
+	pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
+
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-sdk7780.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-sdk7780.c
new file mode 100644
index 0000000..24e96df
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-sdk7780.c
@@ -0,0 +1,43 @@
+/*
+ * arch/sh/drivers/pci/fixups-sdk7780.c
+ *
+ * PCI fixups for the SDK7780SE03
+ *
+ * Copyright (C) 2003  Lineo uSolutions, Inc.
+ * Copyright (C) 2004 - 2006  Paul Mundt
+ * Copyright (C) 2006  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include "pci-sh4.h"
+
+#define IRQ_INTA	evt2irq(0xa20)
+#define IRQ_INTB	evt2irq(0xa40)
+#define IRQ_INTC	evt2irq(0xa60)
+#define IRQ_INTD	evt2irq(0xa80)
+
+/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
+static char sdk7780_irq_tab[4][16] = {
+	/* INTA */
+	{ IRQ_INTA, IRQ_INTD, IRQ_INTC, IRQ_INTD, -1, -1, -1, -1, -1, -1,
+	  -1, -1, -1, -1, -1, -1 },
+	/* INTB */
+	{ IRQ_INTB, IRQ_INTA, -1, IRQ_INTA, -1, -1, -1, -1, -1, -1, -1, -1,
+	  -1, -1, -1, -1 },
+	/* INTC */
+	{ IRQ_INTC, IRQ_INTB, -1, IRQ_INTB, -1, -1, -1, -1, -1, -1, -1, -1,
+	  -1, -1, -1, -1 },
+	/* INTD */
+	{ IRQ_INTD, IRQ_INTC, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	  -1, -1, -1 },
+};
+
+int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
+{
+       return sdk7780_irq_tab[pin-1][slot];
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-sdk7786.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-sdk7786.c
new file mode 100644
index 0000000..36eb6fc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-sdk7786.c
@@ -0,0 +1,67 @@
+/*
+ * SDK7786 FPGA PCIe mux handling
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) "PCI: " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <mach/fpga.h>
+
+/*
+ * The SDK7786 FPGA supports mangling of most of the slots in some way or
+ * another. Slots 3/4 are special in that only one can be supported at a
+ * time, and both appear on port 3 to the PCI bus scan. Enabling slot 4
+ * (the horizontal edge connector) will disable slot 3 entirely.
+ *
+ * Misconfigurations can be detected through the FPGA via the slot
+ * resistors to determine card presence. Hotplug remains unsupported.
+ */
+static unsigned int slot4en __initdata;
+
+char *__init pcibios_setup(char *str)
+{
+	if (strcmp(str, "slot4en") == 0) {
+		slot4en = 1;
+		return NULL;
+	}
+
+	return str;
+}
+
+static int __init sdk7786_pci_init(void)
+{
+	u16 data = fpga_read_reg(PCIECR);
+
+	/*
+	 * Enable slot #4 if it's been specified on the command line.
+	 *
+	 * Optionally reroute if slot #4 has a card present while slot #3
+	 * does not, regardless of command line value.
+	 *
+	 * Card presence is logically inverted.
+	 */
+	slot4en ?: (!(data & PCIECR_PRST4) && (data & PCIECR_PRST3));
+	if (slot4en) {
+		pr_info("Activating PCIe slot#4 (disabling slot#3)\n");
+
+		data &= ~PCIECR_PCIEMUX1;
+		fpga_write_reg(data, PCIECR);
+
+		/* Warn about forced rerouting if slot#3 is occupied */
+		if ((data & PCIECR_PRST3) == 0) {
+			pr_warning("Unreachable card detected in slot#3\n");
+			return -EBUSY;
+		}
+	} else
+		pr_info("PCIe slot#4 disabled\n");
+
+	return 0;
+}
+postcore_initcall(sdk7786_pci_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-se7751.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-se7751.c
new file mode 100644
index 0000000..608f652
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-se7751.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include "pci-sh4.h"
+
+int pcibios_map_platform_irq(const struct pci_dev *, u8 slot, u8 pin)
+{
+        switch (slot) {
+        case 0: return evt2irq(0x3a0);
+        case 1: return evt2irq(0x3a0);	/* AMD Ethernet controller */
+        case 2: return -1;
+        case 3: return -1;
+        case 4: return -1;
+        default:
+                printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
+                return -1;
+        }
+}
+
+#define PCIMCR_MRSET_OFF	0xBFFFFFFF
+#define PCIMCR_RFSH_OFF		0xFFFFFFFB
+
+/*
+ * Only long word accesses of the PCIC's internal local registers and the
+ * configuration registers from the CPU is supported.
+ */
+#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
+#define PCIC_READ(x) readl(PCI_REG(x))
+
+/*
+ * Description:  This function sets up and initializes the pcic, sets
+ * up the BARS, maps the DRAM into the address space etc, etc.
+ */
+int pci_fixup_pcic(struct pci_channel *chan)
+{
+	unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
+	unsigned short bcr2;
+
+	/*
+	* Initialize the slave bus controller on the pcic.  The values used
+	* here should not be hardcoded, but they should be taken from the bsc
+	* on the processor, to make this function as generic as possible.
+	* (i.e. Another sbc may usr different SDRAM timing settings -- in order
+	* for the pcic to work, its settings need to be exactly the same.)
+	*/
+	bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
+	bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
+	wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
+	wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
+	wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
+	mcr = (*(volatile unsigned long*)(SH7751_MCR));
+
+	bcr1 = bcr1 | 0x00080000;  /* Enable Bit 19, BREQEN */
+	(*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
+
+	bcr1 = bcr1 | 0x40080000;  /* Enable Bit 19 BREQEN, set PCIC to slave */
+	PCIC_WRITE(SH7751_PCIBCR1, bcr1);	 /* PCIC BCR1 */
+	PCIC_WRITE(SH7751_PCIBCR2, bcr2);     /* PCIC BCR2 */
+	PCIC_WRITE(SH7751_PCIWCR1, wcr1);     /* PCIC WCR1 */
+	PCIC_WRITE(SH7751_PCIWCR2, wcr2);     /* PCIC WCR2 */
+	PCIC_WRITE(SH7751_PCIWCR3, wcr3);     /* PCIC WCR3 */
+	mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
+	PCIC_WRITE(SH7751_PCIMCR, mcr);      /* PCIC MCR */
+
+
+	/* Enable all interrupts, so we know what to fix */
+	PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
+	PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
+
+	/* Set up standard PCI config registers */
+	PCIC_WRITE(SH7751_PCICONF1,	0xF39000C7); /* Bus Master, Mem & I/O access */
+	PCIC_WRITE(SH7751_PCICONF2,	0x00000000); /* PCI Class code & Revision ID */
+	PCIC_WRITE(SH7751_PCICONF4,	0xab000001); /* PCI I/O address (local regs) */
+	PCIC_WRITE(SH7751_PCICONF5,	0x0c000000); /* PCI MEM address (local RAM)  */
+	PCIC_WRITE(SH7751_PCICONF6,	0xd0000000); /* PCI MEM address (unused)     */
+	PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
+	PCIC_WRITE(SH7751_PCILSR0, 0x03f00000);   /* MEM (full 64M exposed)       */
+	PCIC_WRITE(SH7751_PCILSR1, 0x00000000);   /* MEM (unused)                 */
+	PCIC_WRITE(SH7751_PCILAR0, 0x0c000000);   /* MEM (direct map from PCI)    */
+	PCIC_WRITE(SH7751_PCILAR1, 0x00000000);   /* MEM (unused)                 */
+
+	/* Now turn it on... */
+	PCIC_WRITE(SH7751_PCICR, 0xa5000001);
+
+	/*
+	* Set PCIMBR and PCIIOBR here, assuming a single window
+	* (16M MEM, 256K IO) is enough.  If a larger space is
+	* needed, the readx/writex and inx/outx functions will
+	* have to do more (e.g. setting registers for each call).
+	*/
+
+	/*
+	* Set the MBR so PCI address is one-to-one with window,
+	* meaning all calls go straight through... use BUG_ON to
+	* catch erroneous assumption.
+	*/
+	BUG_ON(chan->resources[1].start != SH7751_PCI_MEMORY_BASE);
+
+	PCIC_WRITE(SH7751_PCIMBR, chan->resources[1].start);
+
+	/* Set IOBR for window containing area specified in pci.h */
+	PCIC_WRITE(SH7751_PCIIOBR, (chan->resources[0].start & SH7751_PCIIOBR_MASK));
+
+	/* All done, may as well say so... */
+	printk("SH7751 PCI: Finished initialization of the PCI controller\n");
+
+	return 1;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-sh03.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-sh03.c
new file mode 100644
index 0000000..7ec4a74
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-sh03.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/sh_intc.h>
+
+int pcibios_map_platform_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	if (dev->bus->number == 0) {
+		switch (slot) {
+		case 4: return evt2irq(0x2a0);	/* eth0       */
+		case 8: return evt2irq(0x2a0);	/* eth1       */
+		case 6: return evt2irq(0x240);	/* PCI bridge */
+		default:
+			printk(KERN_ERR "PCI: Bad IRQ mapping request "
+					"for slot %d\n", slot);
+			return evt2irq(0x240);
+		}
+	} else {
+		switch (pin) {
+		case 0:   irq =  evt2irq(0x240); break;
+		case 1:   irq =  evt2irq(0x240); break;
+		case 2:   irq =  evt2irq(0x240); break;
+		case 3:   irq =  evt2irq(0x240); break;
+		case 4:   irq =  evt2irq(0x240); break;
+		default:  irq = -1; break;
+		}
+	}
+	return irq;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-snapgear.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-snapgear.c
new file mode 100644
index 0000000..a931e59
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-snapgear.c
@@ -0,0 +1,39 @@
+/*
+ * arch/sh/drivers/pci/ops-snapgear.c
+ *
+ * Author:  David McCullough <davidm@snapgear.com>
+ *
+ * Ported to new API by Paul Mundt <lethal@linux-sh.org>
+ *
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * PCI initialization for the SnapGear boards
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/sh_intc.h>
+#include "pci-sh4.h"
+
+int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	int irq = -1;
+
+	switch (slot) {
+	case 8:  /* the PCI bridge */ break;
+	case 11: irq = evt2irq(0x300); break; /* USB    */
+	case 12: irq = evt2irq(0x360); break; /* PCMCIA */
+	case 13: irq = evt2irq(0x2a0); break; /* eth0   */
+	case 14: irq = evt2irq(0x300); break; /* eth1   */
+	case 15: irq = evt2irq(0x360); break; /* safenet (unused) */
+	}
+
+	printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n",
+	       slot, pin - 1 + 'A', irq);
+
+	return irq;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-titan.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-titan.c
new file mode 100644
index 0000000..a9d563e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/fixups-titan.c
@@ -0,0 +1,38 @@
+/*
+ * arch/sh/drivers/pci/ops-titan.c
+ *
+ * Ported to new API by Paul Mundt <lethal@linux-sh.org>
+ *
+ * Modified from ops-snapgear.c written by  David McCullough
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * PCI initialization for the Titan boards
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <mach/titan.h>
+#include "pci-sh4.h"
+
+static char titan_irq_tab[] = {
+	TITAN_IRQ_WAN,
+	TITAN_IRQ_LAN,
+	TITAN_IRQ_MPCIA,
+	TITAN_IRQ_MPCIB,
+	TITAN_IRQ_USB,
+};
+
+int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	int irq = titan_irq_tab[slot];
+
+	printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n",
+		slot, pin - 1 + 'A', irq);
+
+	return irq;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/ops-dreamcast.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/ops-dreamcast.c
new file mode 100644
index 0000000..16e0a1b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/ops-dreamcast.c
@@ -0,0 +1,82 @@
+/*
+ * PCI operations for the Sega Dreamcast
+ *
+ * Copyright (C) 2001, 2002  M. R. Brown
+ * Copyright (C) 2002, 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/pci.h>
+
+/*
+ * The !gapspci_config_access case really shouldn't happen, ever, unless
+ * someone implicitly messes around with the last devfn value.. otherwise we
+ * only support a single device anyways, and if we didn't have a BBA, we
+ * wouldn't make it terribly far through the PCI setup anyways.
+ *
+ * Also, we could very easily support both Type 0 and Type 1 configurations
+ * here, but since it doesn't seem that there is any such implementation in
+ * existence, we don't bother.
+ *
+ * I suppose if someone actually gets around to ripping the chip out of
+ * the BBA and hanging some more devices off of it, then this might be
+ * something to take into consideration. However, due to the cost of the BBA,
+ * and the general lack of activity by DC hardware hackers, this doesn't seem
+ * likely to happen anytime soon.
+ */
+static int gapspci_config_access(unsigned char bus, unsigned int devfn)
+{
+	return (bus == 0) && (devfn == 0);
+}
+
+/*
+ * We can also actually read and write in b/w/l sizes! Thankfully this part
+ * was at least done right, and we don't have to do the stupid masking and
+ * shifting that we do on the 7751! Small wonders never cease to amaze.
+ */
+static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
+{
+	*val = 0xffffffff;
+
+	if (!gapspci_config_access(bus->number, devfn))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+	case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
+	case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
+	case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
+	}
+
+        return PCIBIOS_SUCCESSFUL;
+}
+
+static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
+{
+	if (!gapspci_config_access(bus->number, devfn))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+	case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
+	case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
+	case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
+	}
+
+        return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops gapspci_pci_ops = {
+	.read	= gapspci_read,
+	.write	= gapspci_write,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/ops-sh4.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/ops-sh4.c
new file mode 100644
index 0000000..b623420
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/ops-sh4.c
@@ -0,0 +1,108 @@
+/*
+ * Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780).
+ *
+ * Copyright (C) 2002 - 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License v2. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <asm/addrspace.h>
+#include "pci-sh4.h"
+
+/*
+ * Direct access to PCI hardware...
+ */
+#define CONFIG_CMD(bus, devfn, where) \
+	(0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
+
+/*
+ * Functions for accessing PCI configuration space with type 1 accesses
+ */
+static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
+			   int where, int size, u32 *val)
+{
+	struct pci_channel *chan = bus->sysdata;
+	unsigned long flags;
+	u32 data;
+
+	/*
+	 * PCIPDR may only be accessed as 32 bit words,
+	 * so we must do byte alignment by hand
+	 */
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
+	pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
+	data = pci_read_reg(chan, SH4_PCIPDR);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+
+	switch (size) {
+	case 1:
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+		break;
+	case 2:
+		*val = (data >> ((where & 2) << 3)) & 0xffff;
+		break;
+	case 4:
+		*val = data;
+		break;
+	default:
+		return PCIBIOS_FUNC_NOT_SUPPORTED;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * Since SH4 only does 32bit access we'll have to do a read,
+ * mask,write operation.
+ * We'll allow an odd byte offset, though it should be illegal.
+ */
+static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn,
+			 int where, int size, u32 val)
+{
+	struct pci_channel *chan = bus->sysdata;
+	unsigned long flags;
+	int shift;
+	u32 data;
+
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
+	pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
+	data = pci_read_reg(chan, SH4_PCIPDR);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+
+	switch (size) {
+	case 1:
+		shift = (where & 3) << 3;
+		data &= ~(0xff << shift);
+		data |= ((val & 0xff) << shift);
+		break;
+	case 2:
+		shift = (where & 2) << 3;
+		data &= ~(0xffff << shift);
+		data |= ((val & 0xffff) << shift);
+		break;
+	case 4:
+		data = val;
+		break;
+	default:
+		return PCIBIOS_FUNC_NOT_SUPPORTED;
+	}
+
+	pci_write_reg(chan, data, SH4_PCIPDR);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops sh4_pci_ops = {
+	.read		= sh4_pci_read,
+	.write		= sh4_pci_write,
+};
+
+int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan)
+{
+	/* Nothing to do. */
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/ops-sh5.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/ops-sh5.c
new file mode 100644
index 0000000..4536194
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/ops-sh5.c
@@ -0,0 +1,67 @@
+/*
+ * Support functions for the SH5 PCI hardware.
+ *
+ * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
+ * Copyright (C) 2003, 2004 Paul Mundt
+ * Copyright (C) 2004 Richard Curnow
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+#include <linux/kernel.h>
+#include <linux/rwsem.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include "pci-sh5.h"
+
+static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+			int size, u32 *val)
+{
+	SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
+
+	switch (size) {
+		case 1:
+			*val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3));
+			break;
+		case 2:
+			*val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2));
+			break;
+		case 4:
+			*val = SH5PCI_READ(PDR);
+			break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+			 int size, u32 val)
+{
+	SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
+
+	switch (size) {
+		case 1:
+			SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val);
+			break;
+		case 2:
+			SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val);
+			break;
+		case 4:
+			SH5PCI_WRITE(PDR, val);
+			break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops sh5_pci_ops = {
+	.read		= sh5pci_read,
+	.write		= sh5pci_write,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/ops-sh7786.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/ops-sh7786.c
new file mode 100644
index 0000000..1284210
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/ops-sh7786.c
@@ -0,0 +1,171 @@
+/*
+ * Generic SH7786 PCI-Express operations.
+ *
+ *  Copyright (C) 2009 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License v2. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include "pcie-sh7786.h"
+
+enum {
+	PCI_ACCESS_READ,
+	PCI_ACCESS_WRITE,
+};
+
+static int sh7786_pcie_config_access(unsigned char access_type,
+		struct pci_bus *bus, unsigned int devfn, int where, u32 *data)
+{
+	struct pci_channel *chan = bus->sysdata;
+	int dev, func, type, reg;
+
+	dev = PCI_SLOT(devfn);
+	func = PCI_FUNC(devfn);
+	type = !!bus->parent;
+	reg = where & ~3;
+
+	if (bus->number > 255 || dev > 31 || func > 7)
+		return PCIBIOS_FUNC_NOT_SUPPORTED;
+
+	/*
+	 * While each channel has its own memory-mapped extended config
+	 * space, it's generally only accessible when in endpoint mode.
+	 * When in root complex mode, the controller is unable to target
+	 * itself with either type 0 or type 1 accesses, and indeed, any
+	 * controller initiated target transfer to its own config space
+	 * result in a completer abort.
+	 *
+	 * Each channel effectively only supports a single device, but as
+	 * the same channel <-> device access works for any PCI_SLOT()
+	 * value, we cheat a bit here and bind the controller's config
+	 * space to devfn 0 in order to enable self-enumeration. In this
+	 * case the regular PAR/PDR path is sidelined and the mangled
+	 * config access itself is initiated as a SuperHyway transaction.
+	 */
+	if (pci_is_root_bus(bus)) {
+		if (dev == 0) {
+			if (access_type == PCI_ACCESS_READ)
+				*data = pci_read_reg(chan, PCI_REG(reg));
+			else
+				pci_write_reg(chan, *data, PCI_REG(reg));
+
+			return PCIBIOS_SUCCESSFUL;
+		} else if (dev > 1)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	/* Clear errors */
+	pci_write_reg(chan, pci_read_reg(chan, SH4A_PCIEERRFR), SH4A_PCIEERRFR);
+
+	/* Set the PIO address */
+	pci_write_reg(chan, (bus->number << 24) | (dev << 19) |
+				(func << 16) | reg, SH4A_PCIEPAR);
+
+	/* Enable the configuration access */
+	pci_write_reg(chan, (1 << 31) | (type << 8), SH4A_PCIEPCTLR);
+
+	/* Check for errors */
+	if (pci_read_reg(chan, SH4A_PCIEERRFR) & 0x10)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/* Check for master and target aborts */
+	if (pci_read_reg(chan, SH4A_PCIEPCICONF1) & ((1 << 29) | (1 << 28)))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (access_type == PCI_ACCESS_READ)
+		*data = pci_read_reg(chan, SH4A_PCIEPDR);
+	else
+		pci_write_reg(chan, *data, SH4A_PCIEPDR);
+
+	/* Disable the configuration access */
+	pci_write_reg(chan, 0, SH4A_PCIEPCTLR);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int sh7786_pcie_read(struct pci_bus *bus, unsigned int devfn,
+			    int where, int size, u32 *val)
+{
+	unsigned long flags;
+	int ret;
+	u32 data;
+
+        if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
+	ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus,
+					devfn, where, &data);
+	if (ret != PCIBIOS_SUCCESSFUL) {
+		*val = 0xffffffff;
+		goto out;
+	}
+
+	if (size == 1)
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+	else if (size == 2)
+		*val = (data >> ((where & 2) << 3)) & 0xffff;
+	else
+		*val = data;
+
+	dev_dbg(&bus->dev, "pcie-config-read: bus=%3d devfn=0x%04x "
+		"where=0x%04x size=%d val=0x%08lx\n", bus->number,
+		devfn, where, size, (unsigned long)*val);
+
+out:
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+	return ret;
+}
+
+static int sh7786_pcie_write(struct pci_bus *bus, unsigned int devfn,
+			     int where, int size, u32 val)
+{
+	unsigned long flags;
+	int shift, ret;
+	u32 data;
+
+        if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
+	ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus,
+					devfn, where, &data);
+	if (ret != PCIBIOS_SUCCESSFUL)
+		goto out;
+
+	dev_dbg(&bus->dev, "pcie-config-write: bus=%3d devfn=0x%04x "
+		"where=0x%04x size=%d val=%08lx\n", bus->number,
+		devfn, where, size, (unsigned long)val);
+
+	if (size == 1) {
+		shift = (where & 3) << 3;
+		data &= ~(0xff << shift);
+		data |= ((val & 0xff) << shift);
+	} else if (size == 2) {
+		shift = (where & 2) << 3;
+		data &= ~(0xffff << shift);
+		data |= ((val & 0xffff) << shift);
+	} else
+		data = val;
+
+	ret = sh7786_pcie_config_access(PCI_ACCESS_WRITE, bus,
+					devfn, where, &data);
+out:
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+	return ret;
+}
+
+struct pci_ops sh7786_pci_ops = {
+	.read	= sh7786_pcie_read,
+	.write	= sh7786_pcie_write,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-dreamcast.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-dreamcast.c
new file mode 100644
index 0000000..6336941
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-dreamcast.c
@@ -0,0 +1,100 @@
+/*
+ * PCI support for the Sega Dreamcast
+ *
+ * Copyright (C) 2001, 2002  M. R. Brown
+ * Copyright (C) 2002, 2003  Paul Mundt
+ *
+ * This file originally bore the message (with enclosed-$):
+ *	Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
+ *	Dreamcast PCI: Supports SEGA Broadband Adaptor only.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <mach/pci.h>
+
+static struct resource gapspci_resources[] = {
+	{
+		.name	= "GAPSPCI IO",
+		.start	= GAPSPCI_BBA_CONFIG,
+		.end	= GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
+		.flags	= IORESOURCE_IO,
+	},  {
+		.name	= "GAPSPCI mem",
+		.start	= GAPSPCI_DMA_BASE,
+		.end	= GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct pci_channel dreamcast_pci_controller = {
+	.pci_ops	= &gapspci_pci_ops,
+	.resources	= gapspci_resources,
+	.nr_resources	= ARRAY_SIZE(gapspci_resources),
+	.io_offset	= 0x00000000,
+	.mem_offset	= 0x00000000,
+};
+
+/*
+ * gapspci init
+ */
+
+static int __init gapspci_init(void)
+{
+	char idbuf[16];
+	int i;
+
+	/*
+	 * FIXME: All of this wants documenting to some degree,
+	 * even some basic register definitions would be nice.
+	 *
+	 * I haven't seen anything this ugly since.. maple.
+	 */
+
+	for (i=0; i<16; i++)
+		idbuf[i] = inb(GAPSPCI_REGS+i);
+
+	if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
+		return -ENODEV;
+
+	outl(0x5a14a501, GAPSPCI_REGS+0x18);
+
+	for (i=0; i<1000000; i++)
+		cpu_relax();
+
+	if (inl(GAPSPCI_REGS+0x18) != 1)
+		return -EINVAL;
+
+	outl(0x01000000, GAPSPCI_REGS+0x20);
+	outl(0x01000000, GAPSPCI_REGS+0x24);
+
+	outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
+	outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
+
+	outl(1, GAPSPCI_REGS+0x14);
+	outl(1, GAPSPCI_REGS+0x34);
+
+	/* Setting Broadband Adapter */
+	outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
+	outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
+	outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
+	outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
+	outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
+	outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
+	outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
+
+	return register_pci_controller(&dreamcast_pci_controller);
+}
+arch_initcall(gapspci_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh4.h b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh4.h
new file mode 100644
index 0000000..1543c50
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh4.h
@@ -0,0 +1,182 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PCI_SH4_H
+#define __PCI_SH4_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7785) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7763)
+#include "pci-sh7780.h"
+#else
+#include "pci-sh7751.h"
+#endif
+
+#include <asm/io.h>
+
+#define SH4_PCICR		0x100		/* PCI Control Register */
+  #define SH4_PCICR_PREFIX	  0xA5000000	/* CR prefix for write */
+  #define SH4_PCICR_FTO		  0x00000400	/* TRDY/IRDY Enable */
+  #define SH4_PCICR_TRSB	  0x00000200	/* Target Read Single */
+  #define SH4_PCICR_BSWP	  0x00000100	/* Target Byte Swap */
+  #define SH4_PCICR_PLUP	  0x00000080	/* Enable PCI Pullup */
+  #define SH4_PCICR_ARBM	  0x00000040	/* PCI Arbitration Mode */
+  #define SH4_PCICR_MD		  0x00000030	/* MD9 and MD10 status */
+  #define SH4_PCICR_SERR	  0x00000008	/* SERR output assert */
+  #define SH4_PCICR_INTA	  0x00000004	/* INTA output assert */
+  #define SH4_PCICR_PRST	  0x00000002	/* PCI Reset Assert */
+  #define SH4_PCICR_CFIN	  0x00000001	/* Central Fun. Init Done */
+#define SH4_PCILSR0		0x104		/* PCI Local Space Register0 */
+#define SH4_PCILSR1		0x108		/* PCI Local Space Register1 */
+#define SH4_PCILAR0		0x10C		/* PCI Local Addr Register1 */
+#define SH4_PCILAR1		0x110		/* PCI Local Addr Register1 */
+#define SH4_PCIINT		0x114		/* PCI Interrupt Register */
+  #define SH4_PCIINT_MLCK	  0x00008000	/* Master Lock Error */
+  #define SH4_PCIINT_TABT	  0x00004000	/* Target Abort Error */
+  #define SH4_PCIINT_TRET	  0x00000200	/* Target Retry Error */
+  #define SH4_PCIINT_MFDE	  0x00000100	/* Master Func. Disable Error */
+  #define SH4_PCIINT_PRTY	  0x00000080	/* Address Parity Error */
+  #define SH4_PCIINT_SERR	  0x00000040	/* SERR Detection Error */
+  #define SH4_PCIINT_TWDP	  0x00000020	/* Tgt. Write Parity Error */
+  #define SH4_PCIINT_TRDP	  0x00000010	/* Tgt. Read Parity Err Det. */
+  #define SH4_PCIINT_MTABT	  0x00000008	/* Master-Tgt. Abort Error */
+  #define SH4_PCIINT_MMABT	  0x00000004	/* Master-Master Abort Error */
+  #define SH4_PCIINT_MWPD	  0x00000002	/* Master Write PERR Detect */
+  #define SH4_PCIINT_MRPD	  0x00000001	/* Master Read PERR Detect */
+#define SH4_PCIINTM		0x118		/* PCI Interrupt Mask */
+  #define SH4_PCIINTM_TTADIM	  BIT(14)	/* Target-target abort interrupt */
+  #define SH4_PCIINTM_TMTOIM	  BIT(9)	/* Target retry timeout */
+  #define SH4_PCIINTM_MDEIM	  BIT(8)	/* Master function disable error */
+  #define SH4_PCIINTM_APEDIM	  BIT(7)	/* Address parity error detection */
+  #define SH4_PCIINTM_SDIM	  BIT(6)	/* SERR detection */
+  #define SH4_PCIINTM_DPEITWM	  BIT(5)	/* Data parity error for target write */
+  #define SH4_PCIINTM_PEDITRM	  BIT(4)	/* PERR detection for target read */
+  #define SH4_PCIINTM_TADIMM	  BIT(3)	/* Target abort for master */
+  #define SH4_PCIINTM_MADIMM	  BIT(2)	/* Master abort for master */
+  #define SH4_PCIINTM_MWPDIM	  BIT(1)	/* Master write data parity error */
+  #define SH4_PCIINTM_MRDPEIM	  BIT(0)	/* Master read data parity error */
+#define SH4_PCIALR		0x11C		/* Error Address Register */
+#define SH4_PCICLR		0x120		/* Error Command/Data */
+  #define SH4_PCICLR_MPIO	  0x80000000
+  #define SH4_PCICLR_MDMA0	  0x40000000	/* DMA0 Transfer Error */
+  #define SH4_PCICLR_MDMA1	  0x20000000	/* DMA1 Transfer Error */
+  #define SH4_PCICLR_MDMA2	  0x10000000	/* DMA2 Transfer Error */
+  #define SH4_PCICLR_MDMA3	  0x08000000	/* DMA3 Transfer Error */
+  #define SH4_PCICLR_TGT	  0x04000000	/* Target Transfer Error */
+  #define SH4_PCICLR_CMDL	  0x0000000F	/* PCI Command at Error */
+#define SH4_PCIAINT		0x130		/* Arbiter Interrupt Register */
+  #define SH4_PCIAINT_MBKN	  0x00002000	/* Master Broken Interrupt */
+  #define SH4_PCIAINT_TBTO	  0x00001000	/* Target Bus Time Out */
+  #define SH4_PCIAINT_MBTO	  0x00000800	/* Master Bus Time Out */
+  #define SH4_PCIAINT_TABT	  0x00000008	/* Target Abort */
+  #define SH4_PCIAINT_MABT	  0x00000004	/* Master Abort */
+  #define SH4_PCIAINT_RDPE	  0x00000002	/* Read Data Parity Error */
+  #define SH4_PCIAINT_WDPE	  0x00000001	/* Write Data Parity Error */
+#define SH4_PCIAINTM            0x134		/* Arbiter Int. Mask Register */
+#define SH4_PCIBMLR		0x138		/* Error Bus Master Register */
+  #define SH4_PCIBMLR_REQ4	  0x00000010	/* REQ4 bus master at error */
+  #define SH4_PCIBMLR_REQ3	  0x00000008	/* REQ3 bus master at error */
+  #define SH4_PCIBMLR_REQ2	  0x00000004	/* REQ2 bus master at error */
+  #define SH4_PCIBMLR_REQ1	  0x00000002	/* REQ1 bus master at error */
+  #define SH4_PCIBMLR_REQ0	  0x00000001	/* REQ0 bus master at error */
+#define SH4_PCIDMABT		0x140		/* DMA Transfer Arb. Register */
+  #define SH4_PCIDMABT_RRBN	  0x00000001	/* DMA Arbitor Round-Robin */
+#define SH4_PCIDPA0		0x180		/* DMA0 Transfer Addr. */
+#define SH4_PCIDLA0		0x184		/* DMA0 Local Addr. */
+#define SH4_PCIDTC0		0x188		/* DMA0 Transfer Cnt. */
+#define SH4_PCIDCR0		0x18C		/* DMA0 Control Register */
+  #define SH4_PCIDCR_ALGN	  0x00000600	/* DMA Alignment Mode */
+  #define SH4_PCIDCR_MAST	  0x00000100	/* DMA Termination Type */
+  #define SH4_PCIDCR_INTM	  0x00000080	/* DMA Interrupt Done Mask*/
+  #define SH4_PCIDCR_INTS	  0x00000040	/* DMA Interrupt Done Status */
+  #define SH4_PCIDCR_LHLD	  0x00000020	/* Local Address Control */
+  #define SH4_PCIDCR_PHLD	  0x00000010	/* PCI Address Control*/
+  #define SH4_PCIDCR_IOSEL	  0x00000008	/* PCI Address Space Type */
+  #define SH4_PCIDCR_DIR	  0x00000004	/* DMA Transfer Direction */
+  #define SH4_PCIDCR_STOP	  0x00000002	/* Force DMA Stop */
+  #define SH4_PCIDCR_STRT	  0x00000001	/* DMA Start */
+#define SH4_PCIDPA1		0x190		/* DMA1 Transfer Addr. */
+#define SH4_PCIDLA1		0x194		/* DMA1 Local Addr. */
+#define SH4_PCIDTC1		0x198		/* DMA1 Transfer Cnt. */
+#define SH4_PCIDCR1		0x19C		/* DMA1 Control Register */
+#define SH4_PCIDPA2		0x1A0		/* DMA2 Transfer Addr. */
+#define SH4_PCIDLA2		0x1A4		/* DMA2 Local Addr. */
+#define SH4_PCIDTC2		0x1A8		/* DMA2 Transfer Cnt. */
+#define SH4_PCIDCR2		0x1AC		/* DMA2 Control Register */
+#define SH4_PCIDPA3		0x1B0		/* DMA3 Transfer Addr. */
+#define SH4_PCIDLA3		0x1B4		/* DMA3 Local Addr. */
+#define SH4_PCIDTC3		0x1B8		/* DMA3 Transfer Cnt. */
+#define SH4_PCIDCR3		0x1BC		/* DMA3 Control Register */
+#define SH4_PCIPAR		0x1C0		/* PIO Address Register */
+  #define SH4_PCIPAR_CFGEN	  0x80000000	/* Configuration Enable */
+  #define SH4_PCIPAR_BUSNO	  0x00FF0000	/* Config. Bus Number */
+  #define SH4_PCIPAR_DEVNO	  0x0000FF00	/* Config. Device Number */
+  #define SH4_PCIPAR_REGAD	  0x000000FC	/* Register Address Number */
+#define SH4_PCIMBR		0x1C4		/* Memory Base Address */
+  #define SH4_PCIMBR_MASK	  0xFF000000	/* Memory Space Mask */
+  #define SH4_PCIMBR_LOCK	  0x00000001	/* Lock Memory Space */
+#define SH4_PCIIOBR		0x1C8		/* I/O Base Address Register */
+  #define SH4_PCIIOBR_MASK	  0xFFFC0000	/* IO Space Mask */
+  #define SH4_PCIIOBR_LOCK	  0x00000001	/* Lock IO Space */
+#define SH4_PCIPINT		0x1CC		/* Power Mgmnt Int. Register */
+  #define SH4_PCIPINT_D3	  0x00000002	/* D3 Pwr Mgmt. Interrupt */
+  #define SH4_PCIPINT_D0	  0x00000001	/* D0 Pwr Mgmt. Interrupt */
+#define SH4_PCIPINTM		0x1D0		/* Power Mgmnt Mask Register */
+#define SH4_PCICLKR		0x1D4		/* Clock Ctrl. Register */
+  #define SH4_PCICLKR_PCSTP	  0x00000002	/* PCI Clock Stop */
+  #define SH4_PCICLKR_BCSTP	  0x00000001	/* BCLK Clock Stop */
+/* For definitions of BCR, MCR see ... */
+#define SH4_PCIBCR1		0x1E0		/* Memory BCR1 Register */
+  #define SH4_PCIMBR0		SH4_PCIBCR1
+#define SH4_PCIBCR2		0x1E4		/* Memory BCR2 Register */
+  #define SH4_PCIMBMR0		SH4_PCIBCR2
+#define SH4_PCIWCR1		0x1E8		/* Wait Control 1 Register */
+#define SH4_PCIWCR2		0x1EC		/* Wait Control 2 Register */
+#define SH4_PCIWCR3		0x1F0		/* Wait Control 3 Register */
+  #define SH4_PCIMBR2		SH4_PCIWCR3
+#define SH4_PCIMCR		0x1F4		/* Memory Control Register */
+#define SH4_PCIBCR3		0x1f8		/* Memory BCR3 Register */
+#define SH4_PCIPCTR             0x200		/* Port Control Register */
+  #define SH4_PCIPCTR_P2EN	  0x000400000	/* Port 2 Enable */
+  #define SH4_PCIPCTR_P1EN	  0x000200000	/* Port 1 Enable */
+  #define SH4_PCIPCTR_P0EN	  0x000100000	/* Port 0 Enable */
+  #define SH4_PCIPCTR_P2UP	  0x000000020	/* Port2 Pull Up Enable */
+  #define SH4_PCIPCTR_P2IO	  0x000000010	/* Port2 Output Enable */
+  #define SH4_PCIPCTR_P1UP	  0x000000008	/* Port1 Pull Up Enable */
+  #define SH4_PCIPCTR_P1IO	  0x000000004	/* Port1 Output Enable */
+  #define SH4_PCIPCTR_P0UP	  0x000000002	/* Port0 Pull Up Enable */
+  #define SH4_PCIPCTR_P0IO	  0x000000001	/* Port0 Output Enable */
+#define SH4_PCIPDTR		0x204		/* Port Data Register */
+  #define SH4_PCIPDTR_PB5	  0x000000020	/* Port 5 Enable */
+  #define SH4_PCIPDTR_PB4	  0x000000010	/* Port 4 Enable */
+  #define SH4_PCIPDTR_PB3	  0x000000008	/* Port 3 Enable */
+  #define SH4_PCIPDTR_PB2	  0x000000004	/* Port 2 Enable */
+  #define SH4_PCIPDTR_PB1	  0x000000002	/* Port 1 Enable */
+  #define SH4_PCIPDTR_PB0	  0x000000001	/* Port 0 Enable */
+#define SH4_PCIPDR		0x220		/* Port IO Data Register */
+
+/* arch/sh/kernel/drivers/pci/ops-sh4.c */
+extern struct pci_ops sh4_pci_ops;
+int pci_fixup_pcic(struct pci_channel *chan);
+
+struct sh4_pci_address_space {
+	unsigned long base;
+	unsigned long size;
+};
+
+struct sh4_pci_address_map {
+	struct sh4_pci_address_space window0;
+	struct sh4_pci_address_space window1;
+};
+
+static inline void pci_write_reg(struct pci_channel *chan,
+				 unsigned long val, unsigned long reg)
+{
+	__raw_writel(val, chan->reg_base + reg);
+}
+
+static inline unsigned long pci_read_reg(struct pci_channel *chan,
+					 unsigned long reg)
+{
+	return __raw_readl(chan->reg_base + reg);
+}
+
+#endif /* __PCI_SH4_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh5.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh5.c
new file mode 100644
index 0000000..8229114
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh5.c
@@ -0,0 +1,219 @@
+/*
+ * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
+ * Copyright (C) 2003, 2004 Paul Mundt
+ * Copyright (C) 2004 Richard Curnow
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Support functions for the SH5 PCI hardware.
+ */
+
+#include <linux/kernel.h>
+#include <linux/rwsem.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/irq.h>
+#include <cpu/irq.h>
+#include <asm/io.h>
+#include "pci-sh5.h"
+
+unsigned long pcicr_virt;
+unsigned long PCI_IO_AREA;
+
+/* Rounds a number UP to the nearest power of two. Used for
+ * sizing the PCI window.
+ */
+static u32 __init r2p2(u32 num)
+{
+	int i = 31;
+	u32 tmp = num;
+
+	if (num == 0)
+		return 0;
+
+	do {
+		if (tmp & (1 << 31))
+			break;
+		i--;
+		tmp <<= 1;
+	} while (i >= 0);
+
+	tmp = 1 << i;
+	/* If the original number isn't a power of 2, round it up */
+	if (tmp != num)
+		tmp <<= 1;
+
+	return tmp;
+}
+
+static irqreturn_t pcish5_err_irq(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	unsigned pci_int, pci_air, pci_cir, pci_aint;
+
+	pci_int = SH5PCI_READ(INT);
+	pci_cir = SH5PCI_READ(CIR);
+	pci_air = SH5PCI_READ(AIR);
+
+	if (pci_int) {
+		printk("PCI INTERRUPT (at %08llx)!\n", regs->pc);
+		printk("PCI INT -> 0x%x\n", pci_int & 0xffff);
+		printk("PCI AIR -> 0x%x\n", pci_air);
+		printk("PCI CIR -> 0x%x\n", pci_cir);
+		SH5PCI_WRITE(INT, ~0);
+	}
+
+	pci_aint = SH5PCI_READ(AINT);
+	if (pci_aint) {
+		printk("PCI ARB INTERRUPT!\n");
+		printk("PCI AINT -> 0x%x\n", pci_aint);
+		printk("PCI AIR -> 0x%x\n", pci_air);
+		printk("PCI CIR -> 0x%x\n", pci_cir);
+		SH5PCI_WRITE(AINT, ~0);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
+{
+	printk("SERR IRQ\n");
+
+	return IRQ_NONE;
+}
+
+static struct resource sh5_pci_resources[2];
+
+static struct pci_channel sh5pci_controller = {
+	.pci_ops		= &sh5_pci_ops,
+	.resources		= sh5_pci_resources,
+	.nr_resources		= ARRAY_SIZE(sh5_pci_resources),
+	.mem_offset		= 0x00000000,
+	.io_offset		= 0x00000000,
+};
+
+static int __init sh5pci_init(void)
+{
+	unsigned long memStart = __pa(memory_start);
+	unsigned long memSize = __pa(memory_end) - memStart;
+	u32 lsr0;
+	u32 uval;
+
+        if (request_irq(IRQ_ERR, pcish5_err_irq,
+                        0, "PCI Error",NULL) < 0) {
+                printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
+                return -EINVAL;
+        }
+
+        if (request_irq(IRQ_SERR, pcish5_serr_irq,
+                        0, "PCI SERR interrupt", NULL) < 0) {
+                printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
+                return -EINVAL;
+        }
+
+	pcicr_virt = (unsigned long)ioremap_nocache(SH5PCI_ICR_BASE, 1024);
+	if (!pcicr_virt) {
+		panic("Unable to remap PCICR\n");
+	}
+
+	PCI_IO_AREA = (unsigned long)ioremap_nocache(SH5PCI_IO_BASE, 0x10000);
+	if (!PCI_IO_AREA) {
+		panic("Unable to remap PCIIO\n");
+	}
+
+	/* Clear snoop registers */
+        SH5PCI_WRITE(CSCR0, 0);
+        SH5PCI_WRITE(CSCR1, 0);
+
+        /* Switch off interrupts */
+        SH5PCI_WRITE(INTM,  0);
+        SH5PCI_WRITE(AINTM, 0);
+        SH5PCI_WRITE(PINTM, 0);
+
+        /* Set bus active, take it out of reset */
+        uval = SH5PCI_READ(CR);
+
+	/* Set command Register */
+        SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE |
+		     CR_PFCS | CR_BMAM);
+
+	uval=SH5PCI_READ(CR);
+
+        /* Allow it to be a master */
+	/* NB - WE DISABLE I/O ACCESS to stop overlap */
+        /* set WAIT bit to enable stepping, an attempt to improve stability */
+	SH5PCI_WRITE_SHORT(CSR_CMD,
+			    PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+			    PCI_COMMAND_WAIT);
+
+        /*
+        ** Set translation mapping memory in order to convert the address
+        ** used for the main bus, to the PCI internal address.
+        */
+        SH5PCI_WRITE(MBR,0x40000000);
+
+        /* Always set the max size 512M */
+        SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024));
+
+        /*
+        ** I/O addresses are mapped at internal PCI specific address
+        ** as is described into the configuration bridge table.
+        ** These are changed to 0, to allow cards that have legacy
+        ** io such as vga to function correctly. We set the SH5 IOBAR to
+        ** 256K, which is a bit big as we can only have 64K of address space
+        */
+
+        SH5PCI_WRITE(IOBR,0x0);
+
+        /* Set up a 256K window. Totally pointless waste  of address space */
+        SH5PCI_WRITE(IOBMR,0);
+
+	/* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec.
+	 * Ideally, we would want to map the I/O region somewhere, but it
+	 * is so big this is not that easy!
+         */
+	SH5PCI_WRITE(CSR_IBAR0,~0);
+	/* Set memory size value */
+        memSize = memory_end - memory_start;
+
+	/* Now we set up the mbars so the PCI bus can see the memory of
+	 * the machine */
+	if (memSize < (1024 * 1024)) {
+                printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%lx?\n",
+		       memSize);
+                return -EINVAL;
+        }
+
+        /* Set LSR 0 */
+        lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 :
+		((r2p2(memSize) - 0x100000) | 0x1);
+        SH5PCI_WRITE(LSR0, lsr0);
+
+        /* Set MBAR 0 */
+        SH5PCI_WRITE(CSR_MBAR0, memory_start);
+        SH5PCI_WRITE(LAR0, memory_start);
+
+        SH5PCI_WRITE(CSR_MBAR1,0);
+        SH5PCI_WRITE(LAR1,0);
+        SH5PCI_WRITE(LSR1,0);
+
+        /* Enable the PCI interrupts on the device */
+        SH5PCI_WRITE(INTM,  ~0);
+        SH5PCI_WRITE(AINTM, ~0);
+        SH5PCI_WRITE(PINTM, ~0);
+
+	sh5_pci_resources[0].start = PCI_IO_AREA;
+	sh5_pci_resources[0].end = PCI_IO_AREA + 0x10000;
+
+	sh5_pci_resources[1].start = memStart;
+	sh5_pci_resources[1].end = memStart + memSize;
+
+	return register_pci_controller(&sh5pci_controller);
+}
+arch_initcall(sh5pci_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh5.h b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh5.h
new file mode 100644
index 0000000..3f01dec
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh5.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Definitions for the SH5 PCI hardware.
+ */
+#ifndef __PCI_SH5_H
+#define __PCI_SH5_H
+
+/* Product ID */
+#define PCISH5_PID		0x350d
+
+/* vendor ID */
+#define PCISH5_VID		0x1054
+
+/* Configuration types */
+#define ST_TYPE0                0x00    /* Configuration cycle type 0 */
+#define ST_TYPE1                0x01    /* Configuration cycle type 1 */
+
+/* VCR data */
+#define PCISH5_VCR_STATUS      0x00
+#define PCISH5_VCR_VERSION     0x08
+
+/*
+** ICR register offsets and bits
+*/
+#define PCISH5_ICR_CR          0x100   /* PCI control register values */
+#define CR_PBAM                 (1<<12)
+#define CR_PFCS                 (1<<11)
+#define CR_FTO                  (1<<10)
+#define CR_PFE                  (1<<9)
+#define CR_TBS                  (1<<8)
+#define CR_SPUE                 (1<<7)
+#define CR_BMAM                 (1<<6)
+#define CR_HOST                 (1<<5)
+#define CR_CLKEN                (1<<4)
+#define CR_SOCS                 (1<<3)
+#define CR_IOCS                 (1<<2)
+#define CR_RSTCTL               (1<<1)
+#define CR_CFINT                (1<<0)
+#define CR_LOCK_MASK            0xa5000000
+
+#define PCISH5_ICR_INT         0x114   /* Interrupt registert values     */
+#define INT_MADIM               (1<<2)
+
+#define PCISH5_ICR_LSR0        0X104   /* Local space register values    */
+#define PCISH5_ICR_LSR1        0X108   /* Local space register values    */
+#define PCISH5_ICR_LAR0        0x10c   /* Local address register values  */
+#define PCISH5_ICR_LAR1        0x110   /* Local address register values  */
+#define PCISH5_ICR_INTM        0x118   /* Interrupt mask register values                         */
+#define PCISH5_ICR_AIR         0x11c   /* Interrupt error address information register values    */
+#define PCISH5_ICR_CIR         0x120   /* Interrupt error command information register values    */
+#define PCISH5_ICR_AINT        0x130   /* Interrupt error arbiter interrupt register values      */
+#define PCISH5_ICR_AINTM       0x134   /* Interrupt error arbiter interrupt mask register values */
+#define PCISH5_ICR_BMIR        0x138   /* Interrupt error info register of bus master values     */
+#define PCISH5_ICR_PAR         0x1c0   /* Pio address register values                            */
+#define PCISH5_ICR_MBR         0x1c4   /* Memory space bank register values                      */
+#define PCISH5_ICR_IOBR        0x1c8   /* I/O space bank register values                         */
+#define PCISH5_ICR_PINT        0x1cc   /* power management interrupt register values             */
+#define PCISH5_ICR_PINTM       0x1d0   /* power management interrupt mask register values        */
+#define PCISH5_ICR_MBMR        0x1d8   /* memory space bank mask register values                 */
+#define PCISH5_ICR_IOBMR       0x1dc   /* I/O space bank mask register values                    */
+#define PCISH5_ICR_CSCR0       0x210   /* PCI cache snoop control register 0                     */
+#define PCISH5_ICR_CSCR1       0x214   /* PCI cache snoop control register 1                     */
+#define PCISH5_ICR_PDR         0x220   /* Pio data register values                               */
+
+/* These are configs space registers */
+#define PCISH5_ICR_CSR_VID     0x000	/* Vendor id                           */
+#define PCISH5_ICR_CSR_DID     0x002   /* Device id                           */
+#define PCISH5_ICR_CSR_CMD     0x004   /* Command register                    */
+#define PCISH5_ICR_CSR_STATUS  0x006   /* Stautus                             */
+#define PCISH5_ICR_CSR_IBAR0   0x010   /* I/O base address register           */
+#define PCISH5_ICR_CSR_MBAR0   0x014   /* First  Memory base address register */
+#define PCISH5_ICR_CSR_MBAR1   0x018   /* Second Memory base address register */
+
+/* Base address of registers */
+#define SH5PCI_ICR_BASE (PHYS_PCI_BLOCK + 0x00040000)
+#define SH5PCI_IO_BASE  (PHYS_PCI_BLOCK + 0x00800000)
+/* #define SH5PCI_VCR_BASE (P2SEG_PCICB_BLOCK + P2SEG)    */
+
+extern unsigned long pcicr_virt;
+/* Register selection macro */
+#define PCISH5_ICR_REG(x)                ( pcicr_virt + (PCISH5_ICR_##x))
+/* #define PCISH5_VCR_REG(x)                ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */
+
+/* Write I/O functions */
+#define SH5PCI_WRITE(reg,val)        __raw_writel((u32)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE_SHORT(reg,val)  __raw_writew((u16)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE_BYTE(reg,val)   __raw_writeb((u8)(val),PCISH5_ICR_REG(reg))
+
+/* Read I/O functions */
+#define SH5PCI_READ(reg)             __raw_readl(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ_SHORT(reg)       __raw_readw(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ_BYTE(reg)        __raw_readb(PCISH5_ICR_REG(reg))
+
+/* Set PCI config bits */
+#define SET_CONFIG_BITS(bus,devfn,where)  ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000)
+
+/* Set PCI command register */
+#define CONFIG_CMD(bus, devfn, where)            SET_CONFIG_BITS(bus->number,devfn,where)
+
+/* Size converters */
+#define PCISH5_MEM_SIZCONV(x)		  (((x / 0x40000) - 1) << 18)
+#define PCISH5_IO_SIZCONV(x)		  (((x / 0x40000) - 1) << 18)
+
+extern struct pci_ops sh5_pci_ops;
+
+#endif /* __PCI_SH5_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh7751.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh7751.c
new file mode 100644
index 0000000..86adb1e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh7751.c
@@ -0,0 +1,182 @@
+/*
+ * Low-Level PCI Support for the SH7751
+ *
+ *  Copyright (C) 2003 - 2009  Paul Mundt
+ *  Copyright (C) 2001  Dustin McIntire
+ *
+ *  With cleanup by Paul van Gool <pvangool@mimotech.com>, 2003.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include "pci-sh4.h"
+#include <asm/addrspace.h>
+#include <asm/sizes.h>
+
+static int __init __area_sdram_check(struct pci_channel *chan,
+				     unsigned int area)
+{
+	unsigned long word;
+
+	word = __raw_readl(SH7751_BCR1);
+	/* check BCR for SDRAM in area */
+	if (((word >> area) & 1) == 0) {
+		printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n",
+		       area, word);
+		return 0;
+	}
+	pci_write_reg(chan, word, SH4_PCIBCR1);
+
+	word = __raw_readw(SH7751_BCR2);
+	/* check BCR2 for 32bit SDRAM interface*/
+	if (((word >> (area << 1)) & 0x3) != 0x3) {
+		printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n",
+		       area, word);
+		return 0;
+	}
+	pci_write_reg(chan, word, SH4_PCIBCR2);
+
+	return 1;
+}
+
+static struct resource sh7751_pci_resources[] = {
+	{
+		.name	= "SH7751_IO",
+		.start	= 0x1000,
+		.end	= SZ_4M - 1,
+		.flags	= IORESOURCE_IO
+	}, {
+		.name	= "SH7751_mem",
+		.start	= SH7751_PCI_MEMORY_BASE,
+		.end	= SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+		.flags	= IORESOURCE_MEM
+	},
+};
+
+static struct pci_channel sh7751_pci_controller = {
+	.pci_ops	= &sh4_pci_ops,
+	.resources	= sh7751_pci_resources,
+	.nr_resources	= ARRAY_SIZE(sh7751_pci_resources),
+	.mem_offset	= 0x00000000,
+	.io_offset	= 0x00000000,
+	.io_map_base	= SH7751_PCI_IO_BASE,
+};
+
+static struct sh4_pci_address_map sh7751_pci_map = {
+	.window0	= {
+		.base	= SH7751_CS3_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+};
+
+static int __init sh7751_pci_init(void)
+{
+	struct pci_channel *chan = &sh7751_pci_controller;
+	unsigned int id;
+	u32 word, reg;
+
+	printk(KERN_NOTICE "PCI: Starting initialization.\n");
+
+	chan->reg_base = 0xfe200000;
+
+	/* check for SH7751/SH7751R hardware */
+	id = pci_read_reg(chan, SH7751_PCICONF0);
+	if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
+	    id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
+		pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
+		return -ENODEV;
+	}
+
+	/* Set the BCR's to enable PCI access */
+	reg = __raw_readl(SH7751_BCR1);
+	reg |= 0x80000;
+	__raw_writel(reg, SH7751_BCR1);
+
+	/* Turn the clocks back on (not done in reset)*/
+	pci_write_reg(chan, 0, SH4_PCICLKR);
+	/* Clear Powerdown IRQ's (not done in reset) */
+	word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0;
+	pci_write_reg(chan, word, SH4_PCIPINT);
+
+	/* set the command/status bits to:
+	 * Wait Cycle Control + Parity Enable + Bus Master +
+	 * Mem space enable
+	 */
+	word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER |
+	       SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES;
+	pci_write_reg(chan, word, SH7751_PCICONF1);
+
+	/* define this host as the host bridge */
+	word = PCI_BASE_CLASS_BRIDGE << 24;
+	pci_write_reg(chan, word, SH7751_PCICONF2);
+
+	/* Set IO and Mem windows to local address
+	 * Make PCI and local address the same for easy 1 to 1 mapping
+	 */
+	word = sh7751_pci_map.window0.size - 1;
+	pci_write_reg(chan, word, SH4_PCILSR0);
+	/* Set the values on window 0 PCI config registers */
+	word = P2SEGADDR(sh7751_pci_map.window0.base);
+	pci_write_reg(chan, word, SH4_PCILAR0);
+	pci_write_reg(chan, word, SH7751_PCICONF5);
+
+	/* Set the local 16MB PCI memory space window to
+	 * the lowest PCI mapped address
+	 */
+	word = chan->resources[1].start & SH4_PCIMBR_MASK;
+	pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
+	pci_write_reg(chan, word , SH4_PCIMBR);
+
+	/* Make sure the MSB's of IO window are set to access PCI space
+	 * correctly */
+	word = chan->resources[0].start & SH4_PCIIOBR_MASK;
+	pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
+	pci_write_reg(chan, word, SH4_PCIIOBR);
+
+	/* Set PCI WCRx, BCRx's, copy from BSC locations */
+
+	/* check BCR for SDRAM in specified area */
+	switch (sh7751_pci_map.window0.base) {
+	case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(chan, 0); break;
+	case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(chan, 1); break;
+	case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(chan, 2); break;
+	case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(chan, 3); break;
+	case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(chan, 4); break;
+	case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(chan, 5); break;
+	case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(chan, 6); break;
+	}
+
+	if (!word)
+		return -1;
+
+	/* configure the wait control registers */
+	word = __raw_readl(SH7751_WCR1);
+	pci_write_reg(chan, word, SH4_PCIWCR1);
+	word = __raw_readl(SH7751_WCR2);
+	pci_write_reg(chan, word, SH4_PCIWCR2);
+	word = __raw_readl(SH7751_WCR3);
+	pci_write_reg(chan, word, SH4_PCIWCR3);
+	word = __raw_readl(SH7751_MCR);
+	pci_write_reg(chan, word, SH4_PCIMCR);
+
+	/* NOTE: I'm ignoring the PCI error IRQs for now..
+	 * TODO: add support for the internal error interrupts and
+	 * DMA interrupts...
+	 */
+
+	pci_fixup_pcic(chan);
+
+	/* SH7751 init done, set central function init complete */
+	/* use round robin mode to stop a device starving/overruning */
+	word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
+	pci_write_reg(chan, word, SH4_PCICR);
+
+	return register_pci_controller(chan);
+}
+arch_initcall(sh7751_pci_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh7751.h b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh7751.h
new file mode 100644
index 0000000..5ede38c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh7751.h
@@ -0,0 +1,129 @@
+/*
+ *	Low-Level PCI Support for SH7751 targets
+ *
+ *  Dustin McIntire (dustin@sensoria.com) (c) 2001
+ *  Paul Mundt (lethal@linux-sh.org) (c) 2003
+ *
+ *  May be copied or modified under the terms of the GNU General Public
+ *  License.  See linux/COPYING for more information.
+ *
+ */
+
+#ifndef _PCI_SH7751_H_
+#define _PCI_SH7751_H_
+
+/* Platform Specific Values */
+#define SH7751_VENDOR_ID             0x1054
+#define SH7751_DEVICE_ID             0x3505
+#define SH7751R_DEVICE_ID            0x350e
+
+/* SH7751 Specific Values */
+#define SH7751_PCI_CONFIG_BASE	     0xFD000000  /* Config space base addr */
+#define SH7751_PCI_CONFIG_SIZE       0x1000000   /* Config space size */
+#define SH7751_PCI_MEMORY_BASE	     0xFD000000  /* Memory space base addr */
+#define SH7751_PCI_MEM_SIZE          0x01000000  /* Size of Memory window */
+#define SH7751_PCI_IO_BASE           0xFE240000  /* IO space base address */
+#define SH7751_PCI_IO_SIZE           0x40000     /* Size of IO window */
+
+#define SH7751_PCIREG_BASE           0xFE200000  /* PCI regs base address */
+
+#define SH7751_PCICONF0            0x0           /* PCI Config Reg 0 */
+  #define SH7751_PCICONF0_DEVID      0xFFFF0000  /* Device ID */
+  #define SH7751_PCICONF0_VNDID      0x0000FFFF  /* Vendor ID */
+#define SH7751_PCICONF1            0x4           /* PCI Config Reg 1 */
+  #define SH7751_PCICONF1_DPE        0x80000000  /* Data Parity Error */
+  #define SH7751_PCICONF1_SSE        0x40000000  /* System Error Status */
+  #define SH7751_PCICONF1_RMA        0x20000000  /* Master Abort */
+  #define SH7751_PCICONF1_RTA        0x10000000  /* Target Abort Rx Status */
+  #define SH7751_PCICONF1_STA        0x08000000  /* Target Abort Exec Status */
+  #define SH7751_PCICONF1_DEV        0x06000000  /* Timing Status */
+  #define SH7751_PCICONF1_DPD        0x01000000  /* Data Parity Status */
+  #define SH7751_PCICONF1_FBBC       0x00800000  /* Back 2 Back Status */
+  #define SH7751_PCICONF1_UDF        0x00400000  /* User Defined Status */
+  #define SH7751_PCICONF1_66M        0x00200000  /* 66Mhz Operation Status */
+  #define SH7751_PCICONF1_PM         0x00100000  /* Power Management Status */
+  #define SH7751_PCICONF1_PBBE       0x00000200  /* Back 2 Back Control */
+  #define SH7751_PCICONF1_SER        0x00000100  /* SERR Output Control */
+  #define SH7751_PCICONF1_WCC        0x00000080  /* Wait Cycle Control */
+  #define SH7751_PCICONF1_PER        0x00000040  /* Parity Error Response */
+  #define SH7751_PCICONF1_VPS        0x00000020  /* VGA Pallet Snoop */
+  #define SH7751_PCICONF1_MWIE       0x00000010  /* Memory Write+Invalidate */
+  #define SH7751_PCICONF1_SPC        0x00000008  /* Special Cycle Control */
+  #define SH7751_PCICONF1_BUM        0x00000004  /* Bus Master Control */
+  #define SH7751_PCICONF1_MES        0x00000002  /* Memory Space Control */
+  #define SH7751_PCICONF1_IOS        0x00000001  /* I/O Space Control */
+#define SH7751_PCICONF2            0x8           /* PCI Config Reg 2 */
+  #define SH7751_PCICONF2_BCC        0xFF000000  /* Base Class Code */
+  #define SH7751_PCICONF2_SCC        0x00FF0000  /* Sub-Class Code */
+  #define SH7751_PCICONF2_RLPI       0x0000FF00  /* Programming Interface */
+  #define SH7751_PCICONF2_REV        0x000000FF  /* Revision ID */
+#define SH7751_PCICONF3            0xC           /* PCI Config Reg 3 */
+  #define SH7751_PCICONF3_BIST7      0x80000000  /* Bist Supported */
+  #define SH7751_PCICONF3_BIST6      0x40000000  /* Bist Executing */
+  #define SH7751_PCICONF3_BIST3_0    0x0F000000  /* Bist Passed */
+  #define SH7751_PCICONF3_HD7        0x00800000  /* Single Function device */
+  #define SH7751_PCICONF3_HD6_0      0x007F0000  /* Configuration Layout */
+  #define SH7751_PCICONF3_LAT        0x0000FF00  /* Latency Timer */
+  #define SH7751_PCICONF3_CLS        0x000000FF  /* Cache Line Size */
+#define SH7751_PCICONF4            0x10          /* PCI Config Reg 4 */
+  #define SH7751_PCICONF4_BASE       0xFFFFFFFC  /* I/O Space Base Addr */
+  #define SH7751_PCICONF4_ASI        0x00000001  /* Address Space Type */
+#define SH7751_PCICONF5            0x14          /* PCI Config Reg 5 */
+  #define SH7751_PCICONF5_BASE       0xFFFFFFF0  /* Mem Space Base Addr */
+  #define SH7751_PCICONF5_LAP        0x00000008  /* Prefetch Enabled */
+  #define SH7751_PCICONF5_LAT        0x00000006  /* Local Memory type */
+  #define SH7751_PCICONF5_ASI        0x00000001  /* Address Space Type */
+#define SH7751_PCICONF6            0x18          /* PCI Config Reg 6 */
+  #define SH7751_PCICONF6_BASE       0xFFFFFFF0  /* Mem Space Base Addr */
+  #define SH7751_PCICONF6_LAP        0x00000008  /* Prefetch Enabled */
+  #define SH7751_PCICONF6_LAT        0x00000006  /* Local Memory type */
+  #define SH7751_PCICONF6_ASI        0x00000001  /* Address Space Type */
+/* PCICONF7 - PCICONF10 are undefined */
+#define SH7751_PCICONF11           0x2C          /* PCI Config Reg 11 */
+  #define SH7751_PCICONF11_SSID      0xFFFF0000  /* Subsystem ID */
+  #define SH7751_PCICONF11_SVID      0x0000FFFF  /* Subsystem Vendor ID */
+/* PCICONF12 is undefined */
+#define SH7751_PCICONF13           0x34          /* PCI Config Reg 13 */
+  #define SH7751_PCICONF13_CPTR      0x000000FF  /* PM function pointer */
+/* PCICONF14 is undefined */
+#define SH7751_PCICONF15           0x3C          /* PCI Config Reg 15 */
+  #define SH7751_PCICONF15_IPIN      0x000000FF  /* Interrupt Pin */
+#define SH7751_PCICONF16           0x40          /* PCI Config Reg 16 */
+  #define SH7751_PCICONF16_PMES      0xF8000000  /* PME Support */
+  #define SH7751_PCICONF16_D2S       0x04000000  /* D2 Support */
+  #define SH7751_PCICONF16_D1S       0x02000000  /* D1 Support */
+  #define SH7751_PCICONF16_DSI       0x00200000  /* Bit Device Init. */
+  #define SH7751_PCICONF16_PMCK      0x00080000  /* Clock for PME req. */
+  #define SH7751_PCICONF16_VER       0x00070000  /* PM Version */
+  #define SH7751_PCICONF16_NIP       0x0000FF00  /* Next Item Pointer */
+  #define SH7751_PCICONF16_CID       0x000000FF  /* Capability Identifier */
+#define SH7751_PCICONF17           0x44          /* PCI Config Reg 17 */
+  #define SH7751_PCICONF17_DATA      0xFF000000  /* Data field for PM */
+  #define SH7751_PCICONF17_PMES      0x00800000  /* PME Status */
+  #define SH7751_PCICONF17_DSCL      0x00600000  /* Data Scaling Value */
+  #define SH7751_PCICONF17_DSEL      0x001E0000  /* Data Select */
+  #define SH7751_PCICONF17_PMEN      0x00010000  /* PME Enable */
+  #define SH7751_PCICONF17_PWST      0x00000003  /* Power State */
+/* SH7715 Internal PCI Registers */
+
+/* Memory Control Registers */
+#define SH7751_BCR1                0xFF800000    /* Memory BCR1 Register */
+#define SH7751_BCR2                0xFF800004    /* Memory BCR2 Register */
+#define SH7751_BCR3                0xFF800050    /* Memory BCR3 Register */
+#define SH7751_BCR4                0xFE0A00F0    /* Memory BCR4 Register */
+#define SH7751_WCR1                0xFF800008    /* Wait Control 1 Register */
+#define SH7751_WCR2                0xFF80000C    /* Wait Control 2 Register */
+#define SH7751_WCR3                0xFF800010    /* Wait Control 3 Register */
+#define SH7751_MCR                 0xFF800014    /* Memory Control Register */
+
+/* General Memory Config Addresses */
+#define SH7751_CS0_BASE_ADDR       0x0
+#define SH7751_MEM_REGION_SIZE     0x04000000
+#define SH7751_CS1_BASE_ADDR       (SH7751_CS0_BASE_ADDR + SH7751_MEM_REGION_SIZE)
+#define SH7751_CS2_BASE_ADDR       (SH7751_CS1_BASE_ADDR + SH7751_MEM_REGION_SIZE)
+#define SH7751_CS3_BASE_ADDR       (SH7751_CS2_BASE_ADDR + SH7751_MEM_REGION_SIZE)
+#define SH7751_CS4_BASE_ADDR       (SH7751_CS3_BASE_ADDR + SH7751_MEM_REGION_SIZE)
+#define SH7751_CS5_BASE_ADDR       (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE)
+#define SH7751_CS6_BASE_ADDR       (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE)
+
+#endif /* _PCI_SH7751_H_ */
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh7780.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh7780.c
new file mode 100644
index 0000000..5a6dab6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh7780.c
@@ -0,0 +1,411 @@
+/*
+ * Low-Level PCI Support for the SH7780
+ *
+ *  Copyright (C) 2005 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/irq.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/log2.h>
+#include "pci-sh4.h"
+#include <asm/mmu.h>
+#include <asm/sizes.h>
+
+#if defined(CONFIG_CPU_BIG_ENDIAN)
+# define PCICR_ENDIANNESS SH4_PCICR_BSWP
+#else
+# define PCICR_ENDIANNESS 0
+#endif
+
+
+static struct resource sh7785_pci_resources[] = {
+	{
+		.name	= "PCI IO",
+		.start	= 0x1000,
+		.end	= SZ_4M - 1,
+		.flags	= IORESOURCE_IO,
+	}, {
+		.name	= "PCI MEM 0",
+		.start	= 0xfd000000,
+		.end	= 0xfd000000 + SZ_16M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "PCI MEM 1",
+		.start	= 0x10000000,
+		.end	= 0x10000000 + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		/*
+		 * 32-bit only resources must be last.
+		 */
+		.name	= "PCI MEM 2",
+		.start	= 0xc0000000,
+		.end	= 0xc0000000 + SZ_512M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+	},
+};
+
+static struct pci_channel sh7780_pci_controller = {
+	.pci_ops	= &sh4_pci_ops,
+	.resources	= sh7785_pci_resources,
+	.nr_resources	= ARRAY_SIZE(sh7785_pci_resources),
+	.io_offset	= 0,
+	.mem_offset	= 0,
+	.io_map_base	= 0xfe200000,
+	.serr_irq	= evt2irq(0xa00),
+	.err_irq	= evt2irq(0xaa0),
+};
+
+struct pci_errors {
+	unsigned int	mask;
+	const char	*str;
+} pci_arbiter_errors[] = {
+	{ SH4_PCIAINT_MBKN,	"master broken" },
+	{ SH4_PCIAINT_TBTO,	"target bus time out" },
+	{ SH4_PCIAINT_MBTO,	"master bus time out" },
+	{ SH4_PCIAINT_TABT,	"target abort" },
+	{ SH4_PCIAINT_MABT,	"master abort" },
+	{ SH4_PCIAINT_RDPE,	"read data parity error" },
+	{ SH4_PCIAINT_WDPE,	"write data parity error" },
+}, pci_interrupt_errors[] = {
+	{ SH4_PCIINT_MLCK,	"master lock error" },
+	{ SH4_PCIINT_TABT,	"target-target abort" },
+	{ SH4_PCIINT_TRET,	"target retry time out" },
+	{ SH4_PCIINT_MFDE,	"master function disable error" },
+	{ SH4_PCIINT_PRTY,	"address parity error" },
+	{ SH4_PCIINT_SERR,	"SERR" },
+	{ SH4_PCIINT_TWDP,	"data parity error for target write" },
+	{ SH4_PCIINT_TRDP,	"PERR detected for target read" },
+	{ SH4_PCIINT_MTABT,	"target abort for master" },
+	{ SH4_PCIINT_MMABT,	"master abort for master" },
+	{ SH4_PCIINT_MWPD,	"master write data parity error" },
+	{ SH4_PCIINT_MRPD,	"master read data parity error" },
+};
+
+static irqreturn_t sh7780_pci_err_irq(int irq, void *dev_id)
+{
+	struct pci_channel *hose = dev_id;
+	unsigned long addr;
+	unsigned int status;
+	unsigned int cmd;
+	int i;
+
+	addr = __raw_readl(hose->reg_base + SH4_PCIALR);
+
+	/*
+	 * Handle status errors.
+	 */
+	status = __raw_readw(hose->reg_base + PCI_STATUS);
+	if (status & (PCI_STATUS_PARITY |
+		      PCI_STATUS_DETECTED_PARITY |
+		      PCI_STATUS_SIG_TARGET_ABORT |
+		      PCI_STATUS_REC_TARGET_ABORT |
+		      PCI_STATUS_REC_MASTER_ABORT)) {
+		cmd = pcibios_handle_status_errors(addr, status, hose);
+		if (likely(cmd))
+			__raw_writew(cmd, hose->reg_base + PCI_STATUS);
+	}
+
+	/*
+	 * Handle arbiter errors.
+	 */
+	status = __raw_readl(hose->reg_base + SH4_PCIAINT);
+	for (i = cmd = 0; i < ARRAY_SIZE(pci_arbiter_errors); i++) {
+		if (status & pci_arbiter_errors[i].mask) {
+			printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
+			       pci_arbiter_errors[i].str, addr);
+			cmd |= pci_arbiter_errors[i].mask;
+		}
+	}
+	__raw_writel(cmd, hose->reg_base + SH4_PCIAINT);
+
+	/*
+	 * Handle the remaining PCI errors.
+	 */
+	status = __raw_readl(hose->reg_base + SH4_PCIINT);
+	for (i = cmd = 0; i < ARRAY_SIZE(pci_interrupt_errors); i++) {
+		if (status & pci_interrupt_errors[i].mask) {
+			printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
+			       pci_interrupt_errors[i].str, addr);
+			cmd |= pci_interrupt_errors[i].mask;
+		}
+	}
+	__raw_writel(cmd, hose->reg_base + SH4_PCIINT);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sh7780_pci_serr_irq(int irq, void *dev_id)
+{
+	struct pci_channel *hose = dev_id;
+
+	printk(KERN_DEBUG "PCI: system error received: ");
+	pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1);
+	printk("\n");
+
+	/* Deassert SERR */
+	__raw_writel(SH4_PCIINTM_SDIM, hose->reg_base + SH4_PCIINTM);
+
+	/* Back off the IRQ for awhile */
+	disable_irq_nosync(irq);
+	hose->serr_timer.expires = jiffies + HZ;
+	add_timer(&hose->serr_timer);
+
+	return IRQ_HANDLED;
+}
+
+static int __init sh7780_pci_setup_irqs(struct pci_channel *hose)
+{
+	int ret;
+
+	/* Clear out PCI arbiter IRQs */
+	__raw_writel(0, hose->reg_base + SH4_PCIAINT);
+
+	/* Clear all error conditions */
+	__raw_writew(PCI_STATUS_DETECTED_PARITY  | \
+		     PCI_STATUS_SIG_SYSTEM_ERROR | \
+		     PCI_STATUS_REC_MASTER_ABORT | \
+		     PCI_STATUS_REC_TARGET_ABORT | \
+		     PCI_STATUS_SIG_TARGET_ABORT | \
+		     PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS);
+
+	ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, 0,
+			  "PCI SERR interrupt", hose);
+	if (unlikely(ret)) {
+		printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n");
+		return ret;
+	}
+
+	/*
+	 * The PCI ERR IRQ needs to be IRQF_SHARED since all of the power
+	 * down IRQ vectors are routed through the ERR IRQ vector. We
+	 * only request_irq() once as there is only a single masking
+	 * source for multiple events.
+	 */
+	ret = request_irq(hose->err_irq, sh7780_pci_err_irq, IRQF_SHARED,
+			  "PCI ERR interrupt", hose);
+	if (unlikely(ret)) {
+		free_irq(hose->serr_irq, hose);
+		return ret;
+	}
+
+	/* Unmask all of the arbiter IRQs. */
+	__raw_writel(SH4_PCIAINT_MBKN | SH4_PCIAINT_TBTO | SH4_PCIAINT_MBTO | \
+		     SH4_PCIAINT_TABT | SH4_PCIAINT_MABT | SH4_PCIAINT_RDPE | \
+		     SH4_PCIAINT_WDPE, hose->reg_base + SH4_PCIAINTM);
+
+	/* Unmask all of the PCI IRQs */
+	__raw_writel(SH4_PCIINTM_TTADIM  | SH4_PCIINTM_TMTOIM  | \
+		     SH4_PCIINTM_MDEIM   | SH4_PCIINTM_APEDIM  | \
+		     SH4_PCIINTM_SDIM    | SH4_PCIINTM_DPEITWM | \
+		     SH4_PCIINTM_PEDITRM | SH4_PCIINTM_TADIMM  | \
+		     SH4_PCIINTM_MADIMM  | SH4_PCIINTM_MWPDIM  | \
+		     SH4_PCIINTM_MRDPEIM, hose->reg_base + SH4_PCIINTM);
+
+	return ret;
+}
+
+static inline void __init sh7780_pci_teardown_irqs(struct pci_channel *hose)
+{
+	free_irq(hose->err_irq, hose);
+	free_irq(hose->serr_irq, hose);
+}
+
+static void __init sh7780_pci66_init(struct pci_channel *hose)
+{
+	unsigned int tmp;
+
+	if (!pci_is_66mhz_capable(hose, 0, 0))
+		return;
+
+	/* Enable register access */
+	tmp = __raw_readl(hose->reg_base + SH4_PCICR);
+	tmp |= SH4_PCICR_PREFIX;
+	__raw_writel(tmp, hose->reg_base + SH4_PCICR);
+
+	/* Enable 66MHz operation */
+	tmp = __raw_readw(hose->reg_base + PCI_STATUS);
+	tmp |= PCI_STATUS_66MHZ;
+	__raw_writew(tmp, hose->reg_base + PCI_STATUS);
+
+	/* Done */
+	tmp = __raw_readl(hose->reg_base + SH4_PCICR);
+	tmp |= SH4_PCICR_PREFIX | SH4_PCICR_CFIN;
+	__raw_writel(tmp, hose->reg_base + SH4_PCICR);
+}
+
+static int __init sh7780_pci_init(void)
+{
+	struct pci_channel *chan = &sh7780_pci_controller;
+	phys_addr_t memphys;
+	size_t memsize;
+	unsigned int id;
+	const char *type;
+	int ret, i;
+
+	printk(KERN_NOTICE "PCI: Starting initialization.\n");
+
+	chan->reg_base = 0xfe040000;
+
+	/* Enable CPU access to the PCIC registers. */
+	__raw_writel(PCIECR_ENBL, PCIECR);
+
+	/* Reset */
+	__raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_PRST | PCICR_ENDIANNESS,
+		     chan->reg_base + SH4_PCICR);
+
+	/*
+	 * Wait for it to come back up. The spec says to allow for up to
+	 * 1 second after toggling the reset pin, but in practice 100ms
+	 * is more than enough.
+	 */
+	mdelay(100);
+
+	id = __raw_readw(chan->reg_base + PCI_VENDOR_ID);
+	if (id != PCI_VENDOR_ID_RENESAS) {
+		printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id);
+		return -ENODEV;
+	}
+
+	id = __raw_readw(chan->reg_base + PCI_DEVICE_ID);
+	type = (id == PCI_DEVICE_ID_RENESAS_SH7763) ? "SH7763" :
+	       (id == PCI_DEVICE_ID_RENESAS_SH7780) ? "SH7780" :
+	       (id == PCI_DEVICE_ID_RENESAS_SH7781) ? "SH7781" :
+	       (id == PCI_DEVICE_ID_RENESAS_SH7785) ? "SH7785" :
+					  NULL;
+	if (unlikely(!type)) {
+		printk(KERN_ERR "PCI: Found an unsupported Renesas host "
+		       "controller, device id 0x%04x.\n", id);
+		return -EINVAL;
+	}
+
+	printk(KERN_NOTICE "PCI: Found a Renesas %s host "
+	       "controller, revision %d.\n", type,
+	       __raw_readb(chan->reg_base + PCI_REVISION_ID));
+
+	/*
+	 * Now throw it in to register initialization mode and
+	 * start the real work.
+	 */
+	__raw_writel(SH4_PCICR_PREFIX | PCICR_ENDIANNESS,
+		     chan->reg_base + SH4_PCICR);
+
+	memphys = __pa(memory_start);
+	memsize = roundup_pow_of_two(memory_end - memory_start);
+
+	/*
+	 * If there's more than 512MB of memory, we need to roll over to
+	 * LAR1/LSR1.
+	 */
+	if (memsize > SZ_512M) {
+		__raw_writel(memphys + SZ_512M, chan->reg_base + SH4_PCILAR1);
+		__raw_writel((((memsize - SZ_512M) - SZ_1M) & 0x1ff00000) | 1,
+			     chan->reg_base + SH4_PCILSR1);
+		memsize = SZ_512M;
+	} else {
+		/*
+		 * Otherwise just zero it out and disable it.
+		 */
+		__raw_writel(0, chan->reg_base + SH4_PCILAR1);
+		__raw_writel(0, chan->reg_base + SH4_PCILSR1);
+	}
+
+	/*
+	 * LAR0/LSR0 covers up to the first 512MB, which is enough to
+	 * cover all of lowmem on most platforms.
+	 */
+	__raw_writel(memphys, chan->reg_base + SH4_PCILAR0);
+	__raw_writel(((memsize - SZ_1M) & 0x1ff00000) | 1,
+		     chan->reg_base + SH4_PCILSR0);
+
+	/*
+	 * Hook up the ERR and SERR IRQs.
+	 */
+	ret = sh7780_pci_setup_irqs(chan);
+	if (unlikely(ret))
+		return ret;
+
+	/*
+	 * Disable the cache snoop controller for non-coherent DMA.
+	 */
+	__raw_writel(0, chan->reg_base + SH7780_PCICSCR0);
+	__raw_writel(0, chan->reg_base + SH7780_PCICSAR0);
+	__raw_writel(0, chan->reg_base + SH7780_PCICSCR1);
+	__raw_writel(0, chan->reg_base + SH7780_PCICSAR1);
+
+	/*
+	 * Setup the memory BARs
+	 */
+	for (i = 1; i < chan->nr_resources; i++) {
+		struct resource *res = chan->resources + i;
+		resource_size_t size;
+
+		if (unlikely(res->flags & IORESOURCE_IO))
+			continue;
+
+		/*
+		 * Make sure we're in the right physical addressing mode
+		 * for dealing with the resource.
+		 */
+		if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode()) {
+			chan->nr_resources--;
+			continue;
+		}
+
+		size = resource_size(res);
+
+		/*
+		 * The MBMR mask is calculated in units of 256kB, which
+		 * keeps things pretty simple.
+		 */
+		__raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18,
+			     chan->reg_base + SH7780_PCIMBMR(i - 1));
+		__raw_writel(res->start, chan->reg_base + SH7780_PCIMBR(i - 1));
+	}
+
+	/*
+	 * And I/O.
+	 */
+	__raw_writel(0, chan->reg_base + PCI_BASE_ADDRESS_0);
+	__raw_writel(0, chan->reg_base + SH7780_PCIIOBR);
+	__raw_writel(0, chan->reg_base + SH7780_PCIIOBMR);
+
+	__raw_writew(PCI_COMMAND_SERR   | PCI_COMMAND_WAIT   | \
+		     PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | \
+		     PCI_COMMAND_MEMORY, chan->reg_base + PCI_COMMAND);
+
+	/*
+	 * Initialization mode complete, release the control register and
+	 * enable round robin mode to stop device overruns/starvation.
+	 */
+	__raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO |
+		     PCICR_ENDIANNESS,
+		     chan->reg_base + SH4_PCICR);
+
+	ret = register_pci_controller(chan);
+	if (unlikely(ret))
+		goto err;
+
+	sh7780_pci66_init(chan);
+
+	printk(KERN_NOTICE "PCI: Running at %dMHz.\n",
+	       (__raw_readw(chan->reg_base + PCI_STATUS) & PCI_STATUS_66MHZ) ?
+	       66 : 33);
+
+	return 0;
+
+err:
+	sh7780_pci_teardown_irqs(chan);
+	return ret;
+}
+arch_initcall(sh7780_pci_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh7780.h b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh7780.h
new file mode 100644
index 0000000..1742e2c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci-sh7780.h
@@ -0,0 +1,46 @@
+/*
+ *	Low-Level PCI Support for SH7780 targets
+ *
+ *  Dustin McIntire (dustin@sensoria.com) (c) 2001
+ *  Paul Mundt (lethal@linux-sh.org) (c) 2003
+ *
+ *  May be copied or modified under the terms of the GNU General Public
+ *  License.  See linux/COPYING for more information.
+ *
+ */
+
+#ifndef _PCI_SH7780_H_
+#define _PCI_SH7780_H_
+
+/* SH7780 Control Registers */
+#define	PCIECR			0xFE000008
+#define PCIECR_ENBL		0x01
+
+/* SH7780 Specific Values */
+#define SH7780_PCI_CONFIG_BASE	0xFD000000	/* Config space base addr */
+#define SH7780_PCI_CONFIG_SIZE	0x01000000	/* Config space size */
+
+#define SH7780_PCIREG_BASE	0xFE040000	/* PCI regs base address */
+
+/* SH7780 PCI Config Registers */
+#define SH7780_PCIIR		0x114		/* PCI Interrupt Register */
+#define SH7780_PCIIMR		0x118		/* PCI Interrupt Mask Register */
+#define SH7780_PCIAIR		0x11C		/* Error Address Register */
+#define SH7780_PCICIR		0x120		/* Error Command/Data Register */
+#define SH7780_PCIAINT		0x130		/* Arbiter Interrupt Register */
+#define SH7780_PCIAINTM		0x134		/* Arbiter Int. Mask Register */
+#define SH7780_PCIBMIR		0x138		/* Error Bus Master Register */
+#define SH7780_PCIPAR		0x1C0		/* PIO Address Register */
+#define SH7780_PCIPINT		0x1CC		/* Power Mgmnt Int. Register */
+#define SH7780_PCIPINTM		0x1D0		/* Power Mgmnt Mask Register */
+
+#define SH7780_PCIMBR(x)	(0x1E0 + ((x) * 8))
+#define SH7780_PCIMBMR(x)	(0x1E4 + ((x) * 8))
+#define SH7780_PCIIOBR		0x1F8
+#define SH7780_PCIIOBMR		0x1FC
+#define SH7780_PCICSCR0		0x210		/* Cache Snoop1 Cnt. Register */
+#define SH7780_PCICSCR1		0x214		/* Cache Snoop2 Cnt. Register */
+#define SH7780_PCICSAR0		0x218	/* Cache Snoop1 Addr. Register */
+#define SH7780_PCICSAR1		0x21C	/* Cache Snoop2 Addr. Register */
+
+#endif /* _PCI_SH7780_H_ */
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci.c
new file mode 100644
index 0000000..5976a2c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pci.c
@@ -0,0 +1,300 @@
+/*
+ * New-style PCI core.
+ *
+ * Copyright (c) 2004 - 2009  Paul Mundt
+ * Copyright (c) 2002  M. R. Brown
+ *
+ * Modelled after arch/mips/pci/pci.c:
+ *  Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/dma-debug.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/export.h>
+
+unsigned long PCIBIOS_MIN_IO = 0x0000;
+unsigned long PCIBIOS_MIN_MEM = 0;
+
+/*
+ * The PCI controller list.
+ */
+static struct pci_channel *hose_head, **hose_tail = &hose_head;
+
+static int pci_initialized;
+
+static void pcibios_scanbus(struct pci_channel *hose)
+{
+	static int next_busno;
+	static int need_domain_info;
+	LIST_HEAD(resources);
+	struct resource *res;
+	resource_size_t offset;
+	int i, ret;
+	struct pci_host_bridge *bridge;
+
+	bridge = pci_alloc_host_bridge(0);
+	if (!bridge)
+		return;
+
+	for (i = 0; i < hose->nr_resources; i++) {
+		res = hose->resources + i;
+		offset = 0;
+		if (res->flags & IORESOURCE_IO)
+			offset = hose->io_offset;
+		else if (res->flags & IORESOURCE_MEM)
+			offset = hose->mem_offset;
+		pci_add_resource_offset(&resources, res, offset);
+	}
+
+	list_splice_init(&resources, &bridge->windows);
+	bridge->dev.parent = NULL;
+	bridge->sysdata = hose;
+	bridge->busnr = next_busno;
+	bridge->ops = hose->pci_ops;
+	bridge->swizzle_irq = pci_common_swizzle;
+	bridge->map_irq = pcibios_map_platform_irq;
+
+	ret = pci_scan_root_bus_bridge(bridge);
+	if (ret) {
+		pci_free_host_bridge(bridge);
+		return;
+	}
+
+	hose->bus = bridge->bus;
+
+	need_domain_info = need_domain_info || hose->index;
+	hose->need_domain_info = need_domain_info;
+
+	next_busno = hose->bus->busn_res.end + 1;
+	/* Don't allow 8-bit bus number overflow inside the hose -
+	   reserve some space for bridges. */
+	if (next_busno > 224) {
+		next_busno = 0;
+		need_domain_info = 1;
+	}
+
+	pci_bus_size_bridges(hose->bus);
+	pci_bus_assign_resources(hose->bus);
+	pci_bus_add_devices(hose->bus);
+}
+
+/*
+ * This interrupt-safe spinlock protects all accesses to PCI
+ * configuration space.
+ */
+DEFINE_RAW_SPINLOCK(pci_config_lock);
+static DEFINE_MUTEX(pci_scan_mutex);
+
+int register_pci_controller(struct pci_channel *hose)
+{
+	int i;
+
+	for (i = 0; i < hose->nr_resources; i++) {
+		struct resource *res = hose->resources + i;
+
+		if (res->flags & IORESOURCE_IO) {
+			if (request_resource(&ioport_resource, res) < 0)
+				goto out;
+		} else {
+			if (request_resource(&iomem_resource, res) < 0)
+				goto out;
+		}
+	}
+
+	*hose_tail = hose;
+	hose_tail = &hose->next;
+
+	/*
+	 * Do not panic here but later - this might happen before console init.
+	 */
+	if (!hose->io_map_base) {
+		printk(KERN_WARNING
+		       "registering PCI controller with io_map_base unset\n");
+	}
+
+	/*
+	 * Setup the ERR/PERR and SERR timers, if available.
+	 */
+	pcibios_enable_timers(hose);
+
+	/*
+	 * Scan the bus if it is register after the PCI subsystem
+	 * initialization.
+	 */
+	if (pci_initialized) {
+		mutex_lock(&pci_scan_mutex);
+		pcibios_scanbus(hose);
+		mutex_unlock(&pci_scan_mutex);
+	}
+
+	return 0;
+
+out:
+	for (--i; i >= 0; i--)
+		release_resource(&hose->resources[i]);
+
+	printk(KERN_WARNING "Skipping PCI bus scan due to resource conflict\n");
+	return -1;
+}
+
+static int __init pcibios_init(void)
+{
+	struct pci_channel *hose;
+
+	/* Scan all of the recorded PCI controllers.  */
+	for (hose = hose_head; hose; hose = hose->next)
+		pcibios_scanbus(hose);
+
+	dma_debug_add_bus(&pci_bus_type);
+
+	pci_initialized = 1;
+
+	return 0;
+}
+subsys_initcall(pcibios_init);
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
+{
+	struct pci_dev *dev = data;
+	struct pci_channel *hose = dev->sysdata;
+	resource_size_t start = res->start;
+
+	if (res->flags & IORESOURCE_IO) {
+		if (start < PCIBIOS_MIN_IO + hose->resources[0].start)
+			start = PCIBIOS_MIN_IO + hose->resources[0].start;
+
+		/*
+                 * Put everything into 0x00-0xff region modulo 0x400.
+		 */
+		if (start & 0x300)
+			start = (start + 0x3ff) & ~0x3ff;
+	}
+
+	return start;
+}
+
+static void __init
+pcibios_bus_report_status_early(struct pci_channel *hose,
+				int top_bus, int current_bus,
+				unsigned int status_mask, int warn)
+{
+	unsigned int pci_devfn;
+	u16 status;
+	int ret;
+
+	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
+		if (PCI_FUNC(pci_devfn))
+			continue;
+		ret = early_read_config_word(hose, top_bus, current_bus,
+					     pci_devfn, PCI_STATUS, &status);
+		if (ret != PCIBIOS_SUCCESSFUL)
+			continue;
+		if (status == 0xffff)
+			continue;
+
+		early_write_config_word(hose, top_bus, current_bus,
+					pci_devfn, PCI_STATUS,
+					status & status_mask);
+		if (warn)
+			printk("(%02x:%02x: %04X) ", current_bus,
+			       pci_devfn, status);
+	}
+}
+
+/*
+ * We can't use pci_find_device() here since we are
+ * called from interrupt context.
+ */
+static void __ref
+pcibios_bus_report_status(struct pci_bus *bus, unsigned int status_mask,
+			  int warn)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		u16 status;
+
+		/*
+		 * ignore host bridge - we handle
+		 * that separately
+		 */
+		if (dev->bus->number == 0 && dev->devfn == 0)
+			continue;
+
+		pci_read_config_word(dev, PCI_STATUS, &status);
+		if (status == 0xffff)
+			continue;
+
+		if ((status & status_mask) == 0)
+			continue;
+
+		/* clear the status errors */
+		pci_write_config_word(dev, PCI_STATUS, status & status_mask);
+
+		if (warn)
+			printk("(%s: %04X) ", pci_name(dev), status);
+	}
+
+	list_for_each_entry(dev, &bus->devices, bus_list)
+		if (dev->subordinate)
+			pcibios_bus_report_status(dev->subordinate, status_mask, warn);
+}
+
+void __ref pcibios_report_status(unsigned int status_mask, int warn)
+{
+	struct pci_channel *hose;
+
+	for (hose = hose_head; hose; hose = hose->next) {
+		if (unlikely(!hose->bus))
+			pcibios_bus_report_status_early(hose, hose_head->index,
+					hose->index, status_mask, warn);
+		else
+			pcibios_bus_report_status(hose->bus, status_mask, warn);
+	}
+}
+
+#ifndef CONFIG_GENERIC_IOMAP
+
+void __iomem *__pci_ioport_map(struct pci_dev *dev,
+			       unsigned long port, unsigned int nr)
+{
+	struct pci_channel *chan = dev->sysdata;
+
+	if (unlikely(!chan->io_map_base)) {
+		chan->io_map_base = sh_io_port_base;
+
+		if (pci_domains_supported)
+			panic("To avoid data corruption io_map_base MUST be "
+			      "set with multiple PCI domains.");
+	}
+
+	return (void __iomem *)(chan->io_map_base + port);
+}
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+	iounmap(addr);
+}
+EXPORT_SYMBOL(pci_iounmap);
+
+#endif /* CONFIG_GENERIC_IOMAP */
+
+EXPORT_SYMBOL(PCIBIOS_MIN_IO);
+EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/pcie-sh7786.c b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pcie-sh7786.c
new file mode 100644
index 0000000..0167a73
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pcie-sh7786.c
@@ -0,0 +1,579 @@
+/*
+ * Low-Level PCI Express Support for the SH7786
+ *
+ *  Copyright (C) 2009 - 2011  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) "PCI: " fmt
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/async.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/sh_clk.h>
+#include <linux/sh_intc.h>
+#include "pcie-sh7786.h"
+#include <asm/sizes.h>
+
+struct sh7786_pcie_port {
+	struct pci_channel	*hose;
+	struct clk		*fclk, phy_clk;
+	unsigned int		index;
+	int			endpoint;
+	int			link;
+};
+
+static struct sh7786_pcie_port *sh7786_pcie_ports;
+static unsigned int nr_ports;
+
+static struct sh7786_pcie_hwops {
+	int (*core_init)(void);
+	async_func_t port_init_hw;
+} *sh7786_pcie_hwops;
+
+static struct resource sh7786_pci0_resources[] = {
+	{
+		.name	= "PCIe0 IO",
+		.start	= 0xfd000000,
+		.end	= 0xfd000000 + SZ_8M - 1,
+		.flags	= IORESOURCE_IO,
+	}, {
+		.name	= "PCIe0 MEM 0",
+		.start	= 0xc0000000,
+		.end	= 0xc0000000 + SZ_512M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+	}, {
+		.name	= "PCIe0 MEM 1",
+		.start	= 0x10000000,
+		.end	= 0x10000000 + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "PCIe0 MEM 2",
+		.start	= 0xfe100000,
+		.end	= 0xfe100000 + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource sh7786_pci1_resources[] = {
+	{
+		.name	= "PCIe1 IO",
+		.start	= 0xfd800000,
+		.end	= 0xfd800000 + SZ_8M - 1,
+		.flags	= IORESOURCE_IO,
+	}, {
+		.name	= "PCIe1 MEM 0",
+		.start	= 0xa0000000,
+		.end	= 0xa0000000 + SZ_512M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+	}, {
+		.name	= "PCIe1 MEM 1",
+		.start	= 0x30000000,
+		.end	= 0x30000000 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+	}, {
+		.name	= "PCIe1 MEM 2",
+		.start	= 0xfe300000,
+		.end	= 0xfe300000 + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource sh7786_pci2_resources[] = {
+	{
+		.name	= "PCIe2 IO",
+		.start	= 0xfc800000,
+		.end	= 0xfc800000 + SZ_4M - 1,
+		.flags	= IORESOURCE_IO,
+	}, {
+		.name	= "PCIe2 MEM 0",
+		.start	= 0x80000000,
+		.end	= 0x80000000 + SZ_512M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+	}, {
+		.name	= "PCIe2 MEM 1",
+		.start	= 0x20000000,
+		.end	= 0x20000000 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+	}, {
+		.name	= "PCIe2 MEM 2",
+		.start	= 0xfcd00000,
+		.end	= 0xfcd00000 + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+extern struct pci_ops sh7786_pci_ops;
+
+#define DEFINE_CONTROLLER(start, idx)					\
+{									\
+	.pci_ops	= &sh7786_pci_ops,				\
+	.resources	= sh7786_pci##idx##_resources,			\
+	.nr_resources	= ARRAY_SIZE(sh7786_pci##idx##_resources),	\
+	.reg_base	= start,					\
+	.mem_offset	= 0,						\
+	.io_offset	= 0,						\
+}
+
+static struct pci_channel sh7786_pci_channels[] = {
+	DEFINE_CONTROLLER(0xfe000000, 0),
+	DEFINE_CONTROLLER(0xfe200000, 1),
+	DEFINE_CONTROLLER(0xfcc00000, 2),
+};
+
+static struct clk fixed_pciexclkp = {
+	.rate = 100000000,	/* 100 MHz reference clock */
+};
+
+static void sh7786_pci_fixup(struct pci_dev *dev)
+{
+	/*
+	 * Prevent enumeration of root complex resources.
+	 */
+	if (pci_is_root_bus(dev->bus) && dev->devfn == 0) {
+		int i;
+
+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+			dev->resource[i].start	= 0;
+			dev->resource[i].end	= 0;
+			dev->resource[i].flags	= 0;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RENESAS, PCI_DEVICE_ID_RENESAS_SH7786,
+			 sh7786_pci_fixup);
+
+static int __init phy_wait_for_ack(struct pci_channel *chan)
+{
+	unsigned int timeout = 100;
+
+	while (timeout--) {
+		if (pci_read_reg(chan, SH4A_PCIEPHYADRR) & (1 << BITS_ACK))
+			return 0;
+
+		udelay(100);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int __init pci_wait_for_irq(struct pci_channel *chan, unsigned int mask)
+{
+	unsigned int timeout = 100;
+
+	while (timeout--) {
+		if ((pci_read_reg(chan, SH4A_PCIEINTR) & mask) == mask)
+			return 0;
+
+		udelay(100);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static void __init phy_write_reg(struct pci_channel *chan, unsigned int addr,
+				 unsigned int lane, unsigned int data)
+{
+	unsigned long phyaddr;
+
+	phyaddr = (1 << BITS_CMD) + ((lane & 0xf) << BITS_LANE) +
+			((addr & 0xff) << BITS_ADR);
+
+	/* Set write data */
+	pci_write_reg(chan, data, SH4A_PCIEPHYDOUTR);
+	pci_write_reg(chan, phyaddr, SH4A_PCIEPHYADRR);
+
+	phy_wait_for_ack(chan);
+
+	/* Clear command */
+	pci_write_reg(chan, 0, SH4A_PCIEPHYDOUTR);
+	pci_write_reg(chan, 0, SH4A_PCIEPHYADRR);
+
+	phy_wait_for_ack(chan);
+}
+
+static int __init pcie_clk_init(struct sh7786_pcie_port *port)
+{
+	struct pci_channel *chan = port->hose;
+	struct clk *clk;
+	char fclk_name[16];
+	int ret;
+
+	/*
+	 * First register the fixed clock
+	 */
+	ret = clk_register(&fixed_pciexclkp);
+	if (unlikely(ret != 0))
+		return ret;
+
+	/*
+	 * Grab the port's function clock, which the PHY clock depends
+	 * on. clock lookups don't help us much at this point, since no
+	 * dev_id is available this early. Lame.
+	 */
+	snprintf(fclk_name, sizeof(fclk_name), "pcie%d_fck", port->index);
+
+	port->fclk = clk_get(NULL, fclk_name);
+	if (IS_ERR(port->fclk)) {
+		ret = PTR_ERR(port->fclk);
+		goto err_fclk;
+	}
+
+	clk_enable(port->fclk);
+
+	/*
+	 * And now, set up the PHY clock
+	 */
+	clk = &port->phy_clk;
+
+	memset(clk, 0, sizeof(struct clk));
+
+	clk->parent = &fixed_pciexclkp;
+	clk->enable_reg = (void __iomem *)(chan->reg_base + SH4A_PCIEPHYCTLR);
+	clk->enable_bit = BITS_CKE;
+
+	ret = sh_clk_mstp_register(clk, 1);
+	if (unlikely(ret < 0))
+		goto err_phy;
+
+	return 0;
+
+err_phy:
+	clk_disable(port->fclk);
+	clk_put(port->fclk);
+err_fclk:
+	clk_unregister(&fixed_pciexclkp);
+
+	return ret;
+}
+
+static int __init phy_init(struct sh7786_pcie_port *port)
+{
+	struct pci_channel *chan = port->hose;
+	unsigned int timeout = 100;
+
+	clk_enable(&port->phy_clk);
+
+	/* Initialize the phy */
+	phy_write_reg(chan, 0x60, 0xf, 0x004b008b);
+	phy_write_reg(chan, 0x61, 0xf, 0x00007b41);
+	phy_write_reg(chan, 0x64, 0xf, 0x00ff4f00);
+	phy_write_reg(chan, 0x65, 0xf, 0x09070907);
+	phy_write_reg(chan, 0x66, 0xf, 0x00000010);
+	phy_write_reg(chan, 0x74, 0xf, 0x0007001c);
+	phy_write_reg(chan, 0x79, 0xf, 0x01fc000d);
+	phy_write_reg(chan, 0xb0, 0xf, 0x00000610);
+
+	/* Deassert Standby */
+	phy_write_reg(chan, 0x67, 0x1, 0x00000400);
+
+	/* Disable clock */
+	clk_disable(&port->phy_clk);
+
+	while (timeout--) {
+		if (pci_read_reg(chan, SH4A_PCIEPHYSR))
+			return 0;
+
+		udelay(100);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static void __init pcie_reset(struct sh7786_pcie_port *port)
+{
+	struct pci_channel *chan = port->hose;
+
+	pci_write_reg(chan, 1, SH4A_PCIESRSTR);
+	pci_write_reg(chan, 0, SH4A_PCIETCTLR);
+	pci_write_reg(chan, 0, SH4A_PCIESRSTR);
+	pci_write_reg(chan, 0, SH4A_PCIETXVC0SR);
+}
+
+static int __init pcie_init(struct sh7786_pcie_port *port)
+{
+	struct pci_channel *chan = port->hose;
+	unsigned int data;
+	phys_addr_t memphys;
+	size_t memsize;
+	int ret, i, win;
+
+	/* Begin initialization */
+	pcie_reset(port);
+
+	/*
+	 * Initial header for port config space is type 1, set the device
+	 * class to match. Hardware takes care of propagating the IDSETR
+	 * settings, so there is no need to bother with a quirk.
+	 */
+	pci_write_reg(chan, PCI_CLASS_BRIDGE_PCI << 16, SH4A_PCIEIDSETR1);
+
+	/* Initialize default capabilities. */
+	data = pci_read_reg(chan, SH4A_PCIEEXPCAP0);
+	data &= ~(PCI_EXP_FLAGS_TYPE << 16);
+
+	if (port->endpoint)
+		data |= PCI_EXP_TYPE_ENDPOINT << 20;
+	else
+		data |= PCI_EXP_TYPE_ROOT_PORT << 20;
+
+	data |= PCI_CAP_ID_EXP;
+	pci_write_reg(chan, data, SH4A_PCIEEXPCAP0);
+
+	/* Enable data link layer active state reporting */
+	pci_write_reg(chan, PCI_EXP_LNKCAP_DLLLARC, SH4A_PCIEEXPCAP3);
+
+	/* Enable extended sync and ASPM L0s support */
+	data = pci_read_reg(chan, SH4A_PCIEEXPCAP4);
+	data &= ~PCI_EXP_LNKCTL_ASPMC;
+	data |= PCI_EXP_LNKCTL_ES | 1;
+	pci_write_reg(chan, data, SH4A_PCIEEXPCAP4);
+
+	/* Write out the physical slot number */
+	data = pci_read_reg(chan, SH4A_PCIEEXPCAP5);
+	data &= ~PCI_EXP_SLTCAP_PSN;
+	data |= (port->index + 1) << 19;
+	pci_write_reg(chan, data, SH4A_PCIEEXPCAP5);
+
+	/* Set the completion timer timeout to the maximum 32ms. */
+	data = pci_read_reg(chan, SH4A_PCIETLCTLR);
+	data &= ~0x3f00;
+	data |= 0x32 << 8;
+	pci_write_reg(chan, data, SH4A_PCIETLCTLR);
+
+	/*
+	 * Set fast training sequences to the maximum 255,
+	 * and enable MAC data scrambling.
+	 */
+	data = pci_read_reg(chan, SH4A_PCIEMACCTLR);
+	data &= ~PCIEMACCTLR_SCR_DIS;
+	data |= (0xff << 16);
+	pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
+
+	memphys = __pa(memory_start);
+	memsize = roundup_pow_of_two(memory_end - memory_start);
+
+	/*
+	 * If there's more than 512MB of memory, we need to roll over to
+	 * LAR1/LAMR1.
+	 */
+	if (memsize > SZ_512M) {
+		pci_write_reg(chan, memphys + SZ_512M, SH4A_PCIELAR1);
+		pci_write_reg(chan, ((memsize - SZ_512M) - SZ_256) | 1,
+			      SH4A_PCIELAMR1);
+		memsize = SZ_512M;
+	} else {
+		/*
+		 * Otherwise just zero it out and disable it.
+		 */
+		pci_write_reg(chan, 0, SH4A_PCIELAR1);
+		pci_write_reg(chan, 0, SH4A_PCIELAMR1);
+	}
+
+	/*
+	 * LAR0/LAMR0 covers up to the first 512MB, which is enough to
+	 * cover all of lowmem on most platforms.
+	 */
+	pci_write_reg(chan, memphys, SH4A_PCIELAR0);
+	pci_write_reg(chan, (memsize - SZ_256) | 1, SH4A_PCIELAMR0);
+
+	/* Finish initialization */
+	data = pci_read_reg(chan, SH4A_PCIETCTLR);
+	data |= 0x1;
+	pci_write_reg(chan, data, SH4A_PCIETCTLR);
+
+	/* Let things settle down a bit.. */
+	mdelay(100);
+
+	/* Enable DL_Active Interrupt generation */
+	data = pci_read_reg(chan, SH4A_PCIEDLINTENR);
+	data |= PCIEDLINTENR_DLL_ACT_ENABLE;
+	pci_write_reg(chan, data, SH4A_PCIEDLINTENR);
+
+	/* Disable MAC data scrambling. */
+	data = pci_read_reg(chan, SH4A_PCIEMACCTLR);
+	data |= PCIEMACCTLR_SCR_DIS | (0xff << 16);
+	pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
+
+	/*
+	 * This will timeout if we don't have a link, but we permit the
+	 * port to register anyways in order to support hotplug on future
+	 * hardware.
+	 */
+	ret = pci_wait_for_irq(chan, MASK_INT_TX_CTRL);
+
+	data = pci_read_reg(chan, SH4A_PCIEPCICONF1);
+	data &= ~(PCI_STATUS_DEVSEL_MASK << 16);
+	data |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+		(PCI_STATUS_CAP_LIST | PCI_STATUS_DEVSEL_FAST) << 16;
+	pci_write_reg(chan, data, SH4A_PCIEPCICONF1);
+
+	pci_write_reg(chan, 0x80888000, SH4A_PCIETXVC0DCTLR);
+	pci_write_reg(chan, 0x00222000, SH4A_PCIERXVC0DCTLR);
+
+	wmb();
+
+	if (ret == 0) {
+		data = pci_read_reg(chan, SH4A_PCIEMACSR);
+		printk(KERN_NOTICE "PCI: PCIe#%d x%d link detected\n",
+		       port->index, (data >> 20) & 0x3f);
+	} else
+		printk(KERN_NOTICE "PCI: PCIe#%d link down\n",
+		       port->index);
+
+	for (i = win = 0; i < chan->nr_resources; i++) {
+		struct resource *res = chan->resources + i;
+		resource_size_t size;
+		u32 mask;
+
+		/*
+		 * We can't use the 32-bit mode windows in legacy 29-bit
+		 * mode, so just skip them entirely.
+		 */
+		if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode())
+			continue;
+
+		pci_write_reg(chan, 0x00000000, SH4A_PCIEPTCTLR(win));
+
+		/*
+		 * The PAMR mask is calculated in units of 256kB, which
+		 * keeps things pretty simple.
+		 */
+		size = resource_size(res);
+		mask = (roundup_pow_of_two(size) / SZ_256K) - 1;
+		pci_write_reg(chan, mask << 18, SH4A_PCIEPAMR(win));
+
+		pci_write_reg(chan, upper_32_bits(res->start),
+			      SH4A_PCIEPARH(win));
+		pci_write_reg(chan, lower_32_bits(res->start),
+			      SH4A_PCIEPARL(win));
+
+		mask = MASK_PARE;
+		if (res->flags & IORESOURCE_IO)
+			mask |= MASK_SPC;
+
+		pci_write_reg(chan, mask, SH4A_PCIEPTCTLR(win));
+
+		win++;
+	}
+
+	return 0;
+}
+
+int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
+{
+        return evt2irq(0xae0);
+}
+
+static int __init sh7786_pcie_core_init(void)
+{
+	/* Return the number of ports */
+	return test_mode_pin(MODE_PIN12) ? 3 : 2;
+}
+
+static void __init sh7786_pcie_init_hw(void *data, async_cookie_t cookie)
+{
+	struct sh7786_pcie_port *port = data;
+	int ret;
+
+	/*
+	 * Check if we are configured in endpoint or root complex mode,
+	 * this is a fixed pin setting that applies to all PCIe ports.
+	 */
+	port->endpoint = test_mode_pin(MODE_PIN11);
+
+	/*
+	 * Setup clocks, needed both for PHY and PCIe registers.
+	 */
+	ret = pcie_clk_init(port);
+	if (unlikely(ret < 0)) {
+		pr_err("clock initialization failed for port#%d\n",
+		       port->index);
+		return;
+	}
+
+	ret = phy_init(port);
+	if (unlikely(ret < 0)) {
+		pr_err("phy initialization failed for port#%d\n",
+		       port->index);
+		return;
+	}
+
+	ret = pcie_init(port);
+	if (unlikely(ret < 0)) {
+		pr_err("core initialization failed for port#%d\n",
+			       port->index);
+		return;
+	}
+
+	/* In the interest of preserving device ordering, synchronize */
+	async_synchronize_cookie(cookie);
+
+	register_pci_controller(port->hose);
+}
+
+static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = {
+	.core_init	= sh7786_pcie_core_init,
+	.port_init_hw	= sh7786_pcie_init_hw,
+};
+
+static int __init sh7786_pcie_init(void)
+{
+	struct clk *platclk;
+	int i;
+
+	printk(KERN_NOTICE "PCI: Starting initialization.\n");
+
+	sh7786_pcie_hwops = &sh7786_65nm_pcie_hwops;
+
+	nr_ports = sh7786_pcie_hwops->core_init();
+	BUG_ON(nr_ports > ARRAY_SIZE(sh7786_pci_channels));
+
+	if (unlikely(nr_ports == 0))
+		return -ENODEV;
+
+	sh7786_pcie_ports = kzalloc(nr_ports * sizeof(struct sh7786_pcie_port),
+				    GFP_KERNEL);
+	if (unlikely(!sh7786_pcie_ports))
+		return -ENOMEM;
+
+	/*
+	 * Fetch any optional platform clock associated with this block.
+	 *
+	 * This is a rather nasty hack for boards with spec-mocking FPGAs
+	 * that have a secondary set of clocks outside of the on-chip
+	 * ones that need to be accounted for before there is any chance
+	 * of touching the existing MSTP bits or CPG clocks.
+	 */
+	platclk = clk_get(NULL, "pcie_plat_clk");
+	if (IS_ERR(platclk)) {
+		/* Sane hardware should probably get a WARN_ON.. */
+		platclk = NULL;
+	}
+
+	clk_enable(platclk);
+
+	printk(KERN_NOTICE "PCI: probing %d ports.\n", nr_ports);
+
+	for (i = 0; i < nr_ports; i++) {
+		struct sh7786_pcie_port *port = sh7786_pcie_ports + i;
+
+		port->index		= i;
+		port->hose		= sh7786_pci_channels + i;
+		port->hose->io_map_base	= port->hose->resources[0].start;
+
+		async_schedule(sh7786_pcie_hwops->port_init_hw, port);
+	}
+
+	async_synchronize_full();
+
+	return 0;
+}
+arch_initcall(sh7786_pcie_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/pci/pcie-sh7786.h b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pcie-sh7786.h
new file mode 100644
index 0000000..4a6ff55
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/pci/pcie-sh7786.h
@@ -0,0 +1,580 @@
+/*
+ * SH7786 PCI-Express controller definitions.
+ *
+ * Copyright (C) 2008, 2009 Renesas Technology Corp.
+ * All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __PCI_SH7786_H
+#define __PCI_SH7786_H
+
+/* PCIe bus-0(x4) on SH7786 */			// Rev1.171
+#define SH4A_PCIE_SPW_BASE	0xFE000000	/* spw config address for controller 0 */
+#define SH4A_PCIE_SPW_BASE1	0xFE200000	/* spw config address for controller 1 (Rev1.14)*/
+#define SH4A_PCIE_SPW_BASE2	0xFCC00000	/* spw config address for controller 2 (Rev1.171)*/
+#define SH4A_PCIE_SPW_BASE_LEN	0x00080000
+
+#define SH4A_PCI_CNFG_BASE	0xFE040000	/* pci config address for controller 0 */
+#define SH4A_PCI_CNFG_BASE1	0xFE240000	/* pci config address for controller 1 (Rev1.14)*/
+#define SH4A_PCI_CNFG_BASE2	0xFCC40000	/* pci config address for controller 2 (Rev1.171)*/
+#define SH4A_PCI_CNFG_BASE_LEN	0x00040000
+
+#define SH4A_PCIPIO_ADDR_OFFSET	0x000001c0	/* offset to pci config_address */
+#define SH4A_PCIPIO_DATA_OFFSET	0x00000220	/* offset to pci config_data */
+
+/*
+ * for PEX8111(Max Payload Size=128B,PCIIO_SIZE=64K),
+ * for other(Max Payload Size=4096B,PCIIO_SIZE=8M)
+ */
+
+/* PCI0: PCI memory target transfer 32-bit address translation value(Rev1.11T)*/
+#define SH4A_PCIBMSTR_TRANSLATION	0x20000000
+
+/*	SPVCR0		*/
+#define	SH4A_PCIEVCR0		(0x000000)	/* R - 0x0000 0000 32 */
+#define		BITS_TOP_MB	(24)
+#define		MASK_TOP_MB	(0xff<<BITS_TOP_MB)
+#define		BITS_BOT_MB	(16)
+#define		MASK_BOT_MB	(0xff<<BITS_BOT_MB)
+#define		BITS_VC_ID	(0)
+#define		MASK_VC_ID	(0xffff<<BITS_VC_ID)
+
+/*	SPVCR1		*/
+#define	SH4A_PCIEVCR1		(0x000004)	/* R - 0x0000 0000 32*/
+#define		BITS_BADOPC	(5)		/* 5 BADOPC 0 R/W */
+#define		MASK_BADOPC	(1<<BITS_BADOPC)
+#define		BITS_BADDEST	(4)		/*4 BADDEST 0 R/W  */
+#define		MASK_BADDEST	(1<<BITS_BADDEST)
+#define		BITS_UNSOLRESP	(3)		/* 3 UNSOLRESP 0 R/W  */
+#define		MASK_UNSOLRESP	(1<<BITS_UNSOLRESP)
+#define		BITS_ERRSNT	(1)		/* 1 ERRSNT 0 */
+#define		MASK_ERRSNT	(1<<BITS_ERRSNT)
+#define		BITS_ERRRCV	(0)		/* 0 ERRRCV 0 */
+#define		MASK_ERRRCV	(1<<BITS_ERRRCV)
+
+/*	PCIEENBLR	 */
+#define	SH4A_PCIEENBLR		(0x000008)	/* R/W - 0x0000 0001 32 */
+
+/*	PCIEECR		*/
+#define	SH4A_PCIEECR		(0x00000C)	/* R/W - 0x0000 0000 32 */
+#define		BITS_ENBL	(0)	/* 0 ENBL 0 R/W */
+#define		MASK_ENBL	(1<<BITS_ENBL)
+
+/*	PCIEPAR		*/
+#define	SH4A_PCIEPAR		(0x000010)	/* R/W - 0x0000 0000 32 */
+#define		BITS_BN		(24)
+#define		MASK_BN		(0xff<<BITS_BN)
+#define		BITS_DN		(19)
+#define		MASK_DN		(0x1f<<BITS_DN)
+#define		BITS_FN		(16)
+#define		MASK_FN		(0x7<<BITS_FN)
+#define		BITS_EREGNO	(8)
+#define		MASK_EREGNO	(0xff<<BITS_EREGNO)
+#define		BITS_REGNO	(2)
+#define		MASK_REGNO	(0x3f<<BITS_REGNO)
+
+/*	PCIEPCTLR	*/
+#define	SH4A_PCIEPCTLR		(0x000018)	/* R/W - 0x0000 0000 32 */
+#define		BITS_CCIE	(31)	/*  31 CCIE */
+#define		MASK_CCIE	(1<<BITS_CCIE)
+#define		BITS_TYPE	(8)
+#define		MASK_TYPE	(1<<BITS_TYPE)
+#define		BITS_C_VC	(0)
+#define		MASK_C_VC	(1<<BITS_C_VC)
+
+/*	PCIEPDR		*/
+#define	SH4A_PCIEPDR		(0x000020)	/* R/W - 0x0000 0000 32 */
+#define		BITS_PDR	(0)
+#define		MASK_PDR	(0xffffffff<<BITS_PDR)
+
+/*	PCIEMSGALR	*/
+#define	SH4A_PCIEMSGALR		(0x000030)	/* R/W - 0x0000 0000 32 */
+#define		BITS_MSGADRL	(0)
+#define		MASK_MSGADRL	(0xffffffff<<BITS_MSGADRL)
+
+/*	PCIEMSGAHR	*/
+#define	SH4A_PCIEMSGAHR		(0x000034)	/* R/W - 0x0000 0000 32 */
+#define		BITS_MSGADRH	(0)
+#define		MASK_MSGADRH	(0xffffffff<<BITS_MSGADRH)
+
+/*	PCIEMSGCTLR	*/
+#define	SH4A_PCIEMSGCTLR	(0x000038)	/* R/W - 0x0000 0000 32 */
+#define		BITS_MSGIE	(31)
+#define		MASK_MSGIE	(1<<BITS_MSGIE)
+#define		BITS_MROUTE	(16)
+#define		MASK_MROUTE	(0x7<<BITS_MROUTE)
+#define		BITS_MCODE	(8)
+#define		MASK_MCODE	(0xff<<BITS_MCODE)
+#define		BITS_M_VC	(0)
+#define		MASK_M_VC	(1<<BITS_M_VC)
+
+/*	PCIEMSG		*/
+#define	SH4A_PCIEMSG		(0x000040)	/* W - - 32	*/
+#define		BITS_MDATA	(0)
+#define		MASK_MDATA	(0xffffffff<<BITS_MDATA)
+
+/*	PCIEUNLOCKCR	*/
+#define	SH4A_PCIEUNLOCKCR	(0x000048)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIEIDR		*/
+#define	SH4A_PCIEIDR		(0x000060)	/* R/W - 0x0101 1101 32 */
+
+/*	PCIEDBGCTLR	*/
+#define	SH4A_PCIEDBGCTLR	(0x000100)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIEINTXR	*/
+#define	SH4A_PCIEINTXR		(0x004000)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIERMSGR	*/
+#define	SH4A_PCIERMSGR		(0x004010)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIERSTR	*/
+#define SH4A_PCIERSTR(x)	(0x008000 + ((x) * 0x4)) /* R/W - 0x0000 0000 32 */
+
+/*	PCIESRSTR	 */
+#define SH4A_PCIESRSTR		(0x008040)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIEPHYCTLR	*/
+#define	SH4A_PCIEPHYCTLR	(0x010000)	/* R/W - 0x0000 0000 32 */
+#define		BITS_CKE	(0)
+#define		MASK_CKE	(1<<BITS_CKE)
+
+/*	PCIERMSGIER	*/
+#define	SH4A_PCIERMSGIER	(0x004040)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIEPHYADRR	*/
+#define	SH4A_PCIEPHYADRR	(0x010004)	/* R/W - 0x0000 0000 32 */
+#define		BITS_ACK	(24)			// Rev1.171
+#define		MASK_ACK	(1<<BITS_ACK)		// Rev1.171
+#define		BITS_CMD	(16)			// Rev1.171
+#define		MASK_CMD	(0x03<<BITS_CMD)	// Rev1.171
+#define		BITS_LANE	(8)
+#define		MASK_LANE	(0x0f<<BITS_LANE)
+#define		BITS_ADR	(0)
+#define		MASK_ADR	(0xff<<BITS_ADR)
+
+/*	PCIEPHYDINR	*/							// Rev1.171 start.
+#define	SH4A_PCIEPHYDINR	(0x010008)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIEPHYDOUTR	*/
+#define	SH4A_PCIEPHYDOUTR	(0x01000C)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIEPHYSR	*/
+#define	SH4A_PCIEPHYSR		(0x010010)	/* R/W - 0x0000 0000 32 */	// Rev1.171 end.
+
+/*	PCIEPHYDATAR	*/
+#define	SH4A_PCIEPHYDATAR	(0x00008)	/* R/W - 0xxxxx xxxx 32 */
+#define		BITS_DATA	(0)
+#define		MASK_DATA	(0xffffffff<<BITS_DATA)
+
+/*	PCIETCTLR	*/
+#define	SH4A_PCIETCTLR		(0x020000)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_CFINT	(0)
+#define		MASK_CFINT	(1<<BITS_CFINT)
+
+/*	PCIETSTR	*/
+#define	SH4A_PCIETSTR		(0x020004)	/* R 0x0000 0000 32  */
+
+/*	PCIEINTR	*/
+#define	SH4A_PCIEINTR		(0x020008)	/* R/W R/W 0x0000 0000 32  */
+#define		BITS_INT_RX_ERP			(31)
+#define		MASK_INT_RX_ERP			(1<<BITS_INT_RX_ERP)
+#define		BITS_INT_RX_VCX_Posted		(30)
+#define		MASK_INT_RX_VCX_Posted		(1<<BITS_INT_RX_VCX_Posted)
+#define		BITS_INT_RX_VCX_NonPosted	(29)
+#define		MASK_INT_RX_VCX_NonPosted	(1<<BITS_INT_RX_VCX_NonPosted)
+#define		BITS_INT_RX_VCX_CPL		(28)
+#define		MASK_INT_RX_VCX_CPL		(1<<BITS_INT_RX_VCX_CPL)
+#define		BITS_INT_TX_VCX_Posted		(26)
+#define		MASK_INT_TX_VCX_Posted		(1<<BITS_INT_TX_VCX_Posted)
+#define		BITS_INT_TX_VCX_NonPosted	(25)
+#define		MASK_INT_TX_VCX_NonPosted	(1<<BITS_INT_TX_VCX_NonPosted)
+#define		BITS_INT_TX_VCX_CPL		(24)
+#define		MASK_INT_TX_VCX_CPL		(1<<BITS_INT_TX_VCX_CPL)
+#define		BITS_INT_RX_VC0_Posted		(22)
+#define		MASK_INT_RX_VC0_Posted		(1<<BITS_INT_RX_VC0_Posted)
+#define		BITS_INT_RX_VC0_NonPosted	(21)
+#define		MASK_INT_RX_VC0_NonPosted	(1<<BITS_INT_RX_VC0_NonPosted)
+#define		BITS_INT_RX_VC0_CPL		(20)
+#define		MASK_INT_RX_VC0_CPL		(1<<BITS_INT_RX_VC0_CPL)
+#define		BITS_INT_TX_VC0_Posted		(18)
+#define		MASK_INT_TX_VC0_Posted		(1<<BITS_INT_TX_VC0_Posted)
+#define		BITS_INT_TX_VC0_NonPosted	(17)
+#define		MASK_INT_TX_VC0_NonPosted	(1<<BITS_INT_TX_VC0_NonPosted)
+#define		BITS_INT_TX_VC0_CPL		(16)
+#define		MASK_INT_TX_VC0_CPL		(1<<BITS_INT_TX_VC0_CPL)
+#define		BITS_INT_RX_CTRL		(15)
+#define		MASK_INT_RX_CTRL		(1<<BITS_INT_RX_CTRL)
+#define		BITS_INT_TX_CTRL		(14)
+#define		MASK_INT_TX_CTRL		(1<<BITS_INT_TX_CTRL)
+#define		BITS_INTTL			(11)
+#define		MASK_INTTL			(1<<BITS_INTTL)
+#define		BITS_INTDL			(10)
+#define		MASK_INTDL			(1<<BITS_INTDL)
+#define		BITS_INTMAC			(9)
+#define		MASK_INTMAC			(1<<BITS_INTMAC)
+#define		BITS_INTPM			(8)
+#define		MASK_INTPM			(1<<BITS_INTPM)
+
+/*	PCIEINTER	*/
+#define	SH4A_PCIEINTER		(0x02000C)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_INT_RX_ERP			(31)
+#define		MASK_INT_RX_ERP			(1<<BITS_INT_RX_ERP)
+#define		BITS_INT_RX_VCX_Posted		(30)
+#define		MASK_INT_RX_VCX_Posted		(1<<BITS_INT_RX_VCX_Posted)
+#define		BITS_INT_RX_VCX_NonPosted	(29)
+#define		MASK_INT_RX_VCX_NonPosted	(1<<BITS_INT_RX_VCX_NonPosted)
+#define		BITS_INT_RX_VCX_CPL		(28)
+#define		MASK_INT_RX_VCX_CPL		(1<<BITS_INT_RX_VCX_CPL)
+#define		BITS_INT_TX_VCX_Posted		(26)
+#define		MASK_INT_TX_VCX_Posted		(1<<BITS_INT_TX_VCX_Posted)
+#define		BITS_INT_TX_VCX_NonPosted	(25)
+#define		MASK_INT_TX_VCX_NonPosted	(1<<BITS_INT_TX_VCX_NonPosted)
+#define		BITS_INT_TX_VCX_CPL		(24)
+#define		MASK_INT_TX_VCX_CPL		(1<<BITS_INT_TX_VCX_CPL)
+#define		BITS_INT_RX_VC0_Posted		(22)
+#define		MASK_INT_RX_VC0_Posted		(1<<BITS_INT_RX_VC0_Posted)
+#define		BITS_INT_RX_VC0_NonPosted	(21)
+#define		MASK_INT_RX_VC0_NonPosted	(1<<BITS_INT_RX_VC0_NonPosted)
+#define		BITS_INT_RX_VC0_CPL		(20)
+#define		MASK_INT_RX_VC0_CPL		(1<<BITS_INT_RX_VC0_CPL)
+#define		BITS_INT_TX_VC0_Posted		(18)
+#define		MASK_INT_TX_VC0_Posted		(1<<BITS_INT_TX_VC0_Posted)
+#define		BITS_INT_TX_VC0_NonPosted	(17)
+#define		MASK_INT_TX_VC0_NonPosted	(1<<BITS_INT_TX_VC0_NonPosted)
+#define		BITS_INT_TX_VC0_CPL		(16)
+#define		MASK_INT_TX_VC0_CPL		(1<<BITS_INT_TX_VC0_CPL)
+#define		BITS_INT_RX_CTRL		(15)
+#define		MASK_INT_RX_CTRL		(1<<BITS_INT_RX_CTRL)
+#define		BITS_INT_TX_CTRL		(14)
+#define		MASK_INT_TX_CTRL		(1<<BITS_INT_TX_CTRL)
+#define		BITS_INTTL			(11)
+#define		MASK_INTTL			(1<<BITS_INTTL)
+#define		BITS_INTDL			(10)
+#define		MASK_INTDL			(1<<BITS_INTDL)
+#define		BITS_INTMAC			(9)
+#define		MASK_INTMAC			(1<<BITS_INTMAC)
+#define		BITS_INTPM			(8)
+#define		MASK_INTPM			(1<<BITS_INTPM)
+
+/*	PCIEEH0R	*/
+#define SH4A_PCIEEHR(x)		(0x020010 + ((x) * 0x4)) /* R - 0x0000 0000 32 */
+
+/*	PCIEAIR	 */
+#define	SH4A_PCIEAIR		(SH4A_PCIE_BASE + 0x020010)	/* R/W R/W 0xxxxx xxxx 32 */
+
+/*	 PCIECIR	 */
+#define	SH4A_PCIECIR		(SH4A_PCIE_BASE)	/* R/W R/W 0xxxxx xxxx 32 */
+
+/*	 PCIEERRFR	 */								// Rev1.18
+#define	SH4A_PCIEERRFR		(0x020020)		/* R/W R/W 0xxxxx xxxx 32 */	// Rev1.18
+
+/*	PCIEERRFER	*/
+#define SH4A_PCIEERRFER		(0x020024)		/* R/W R/W 0x0000 0000 32 */
+
+/*	PCIEERRFR2	*/
+#define SH4A_PCIEERRFR2		(0x020028)		/* R/W R/W 0x0000 0000 32 */
+
+/*	PCIEMSIR	*/
+#define SH4A_PCIEMSIR		(0x020040)		/* R/W - 0x0000 0000 32 */
+
+/*	PCIEMSIFR	*/
+#define SH4A_PCIEMSIFR		(0x020044)		/* R/W R/W 0x0000 0000 32 */
+
+/*	PCIEPWRCTLR	*/
+#define SH4A_PCIEPWRCTLR	(0x020100)		/* R/W - 0x0000 0000 32 */
+
+/*	PCIEPCCTLR	*/
+#define SH4A_PCIEPCCTLR		(0x020180)		/* R/W - 0x0000 0000 32 */
+
+											// Rev1.18
+/*	PCIELAR0	*/
+#define	SH4A_PCIELAR0		(0x020200)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_LARn	(20)
+#define		MASK_LARn	(0xfff<<BITS_LARn)
+
+#define	SH4A_PCIE_020204	(0x020204)	/* R/W R/W 0x0000 0000 32 */
+
+/*	PCIELAMR0	*/
+#define	SH4A_PCIELAMR0		(0x020208)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_LAMRn	(20)
+#define		MASK_LAMRn	(0x1ff<<BITS_LAMRn)
+#define		BITS_LAREn	(0)
+#define		MASK_LAREn	(0x1<<BITS_LAREn)
+
+/*	PCIECSCR0	*/
+#define	SH4A_PCIECSCR0		(0x020210)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_RANGE	(2)
+#define		MASK_RANGE	(0x7<<BITS_RANGE)
+#define		BITS_SNPMD	(0)
+#define		MASK_SNPMD	(0x3<<BITS_SNPMD)
+
+/*	PCIECSAR0	*/
+#define	SH4A_PCIECSAR0		(0x020214)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_CSADR	(0)
+#define		MASK_CSADR	(0xffffffff<<BITS_CSADR)
+
+/*	PCIESTCTLR0	*/
+#define	SH4A_PCIESTCTLR0	(0x020218)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_SHPRI	(8)
+#define		MASK_SHPRI	(0x0f<<BITS_SHPRI)
+
+#define	SH4A_PCIE_020224	(0x020224)	/* R/W R/W 0x0000 0000 32 */
+
+#define	SH4A_PCIELAR1		(0x020220)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIELAMR1		(0x020228)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSCR1		(0x020230)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSAR1		(0x020234)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIESTCTLR1	(0x020238)	/* R/W R/W 0x0000 0000 32 */
+
+#define	SH4A_PCIELAR2		(0x020240)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIE_020244	(0x020244)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIELAMR2		(0x020248)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSCR2		(0x020250)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSAR2		(0x020254)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIESTCTLR2	(0x020258)	/* R/W R/W 0x0000 0000 32 */
+
+#define	SH4A_PCIELAR3		(0x020260)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIE_020264	(0x020264)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIELAMR3		(0x020268)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSCR3		(0x020270)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSAR3		(0x020274)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIESTCTLR3	(0x020278)	/* R/W R/W 0x0000 0000 32 */
+
+#define	SH4A_PCIELAR4		(0x020280)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIE_020284	(0x020284)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIELAMR4		(0x020288)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSCR4		(0x020290)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSAR4		(0x020294)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIESTCTLR4	(0x020298)	/* R/W R/W 0x0000 0000 32 */
+
+#define	SH4A_PCIELAR5		(0x0202A0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIE_0202A4	(0x0202A4)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIELAMR5		(0x0202A8)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSCR5		(0x0202B0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSAR5		(0x0202B4)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIESTCTLR5	(0x0202B8)	/* R/W R/W 0x0000 0000 32 */
+
+/*	PCIEPARL	*/
+#define	SH4A_PCIEPARL(x)	(0x020400 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
+#define		BITS_PAL	(18)
+#define		MASK_PAL	(0x3fff<<BITS_PAL)
+
+/*	PCIEPARH	*/
+#define	SH4A_PCIEPARH(x)	(0x020404 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
+#define		BITS_PAH	(0)
+#define		MASK_PAH	(0xffffffff<<BITS_PAH)
+
+/*	PCIEPAMR	 */
+#define	SH4A_PCIEPAMR(x)	(0x020408 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
+#define		BITS_PAM	(18)
+#define		MASK_PAM	(0x3fff<<BITS_PAM)
+
+/*	PCIEPTCTLR	*/
+#define SH4A_PCIEPTCTLR(x)	(0x02040C + ((x) * 0x20))
+#define		BITS_PARE	(31)
+#define		MASK_PARE	(0x1<<BITS_PARE)
+#define		BITS_TC		(20)
+#define		MASK_TC		(0x7<<BITS_TC)
+#define		BITS_T_VC	(16)
+#define		MASK_T_VC	(0x1<<BITS_T_VC)
+#define		BITS_LOCK	(12)
+#define		MASK_LOCK	(0x1<<BITS_LOCK)
+#define		BITS_SPC	(8)
+#define		MASK_SPC	(0x1<<BITS_SPC)
+
+#define	SH4A_PCIEDMAOR		(0x021000)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAR0		(0x021100)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAHR0	(0x021104)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAR0		(0x021108)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAHR0	(0x02110C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMBCNTR0	(0x021110)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSBCNTR0	(0x021114)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSTRR0	(0x021118)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCAR0	(0x02111C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCR0		(0x021120)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCC2R0	(0x021124)	/* R/W R/W 0x0000 0000 - */
+#define	SH4A_PCIEDMCCCR0	(0x021128)	/* R/W R/W 0x0000 0000 32 */
+#define SH4A_PCIEDMCHSR0	(0x02112C)	/* R/W - 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAR1		(0x021140)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAHR1	(0x021144)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAR1		(0x021148)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAHR1	(0x02114C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMBCNTR1	(0x021150)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSBCNTR1	(0x021154)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSTRR1	(0x021158)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCAR1	(0x02115C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCR1		(0x021160)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCC2R1	(0x021164)	/* R/W R/W 0x0000 0000 - */
+#define	SH4A_PCIEDMCCCR1	(0x021168)	/* R/W R/W 0x0000 0000 32 */
+#define SH4A_PCIEDMCHSR1	(0x02116C)	/* R/W - 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAR2		(0x021180)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAHR2	(0x021184)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAR2		(0x021188)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAHR2	(0x02118C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMBCNTR2	(0x021190)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSBCNTR2	(0x021194)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSTRR2	(0x021198)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCAR2	(0x02119C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCR2		(0x0211A0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCC2R2	(0x0211A4)	/* R/W R/W 0x0000 0000 -  */
+#define	SH4A_PCIEDMCCCR2	(0x0211A8)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAR3		(0x0211C0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAHR3	(0x0211C4)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAR3		(0x0211C8)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAHR3	(0x0211CC)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMBCNTR3	(0x0211D0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSBCNTR3	(0x0211D4)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSTRR3	(0x0211D8)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCAR3	(0x0211DC)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCR3		(0x0211E0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCC2R3	(0x0211E4)	/* R/W R/W 0x0000 0000 -  */
+#define	SH4A_PCIEDMCCCR3	(0x0211E8)	/* R/W R/W 0x0000 0000 32 */
+#define SH4A_PCIEDMCHSR3	(0x0211EC)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPCICONF0	(0x040000)	/* R R - 8/16/32 */
+#define	SH4A_PCIEPCICONF1	(0x040004)	/* R/W R/W 0x0008 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF2	(0x040008)	/* R/W R/W 0xFF00 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF3	(0x04000C)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF4	(0x040010)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF5	(0x040014)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF6	(0x040018)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF7	(0x04001C)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF8	(0x040020)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF9	(0x040024)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF10	(0x040028)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF11	(0x04002C)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF12	(0x040030)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF13	(0x040034)	/* R/W R/W 0x0000 0040 8/16/32 */
+#define	SH4A_PCIEPCICONF14	(0x040038)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF15	(0x04003C)	/* R/W R/W 0x0000 00FF 8/16/32 */
+#define	SH4A_PCIEPMCAP0		(0x040040)	/* R/W R 0x0003 5001 8/16/32 */
+#define	SH4A_PCIEPMCAP1		(0x040044)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEMSICAP0	(0x040050)	/* R/W R/W 0x0180 7005 8/16/32 */
+#define	SH4A_PCIEMSICAP1	(0x040054)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEMSICAP2	(0x040058)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEMSICAP3	(0x04005C)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEMSICAP4	(0x040060)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEMSICAP5	(0x040064)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEEXPCAP0	(0x040070)	/* R/W R/W 0x0001 0010 8/16/32 */
+#define	SH4A_PCIEEXPCAP1	(0x040074)	/* R/W R 0x0000 0005 8/16/32 */
+#define	SH4A_PCIEEXPCAP2	(0x040078)	/* R/W R/W 0x0000 0801 8/16/32 */
+#define	SH4A_PCIEEXPCAP3	(0x04007C)	/* R/W R 0x0003 F421 8/16/32 */
+#define	SH4A_PCIEEXPCAP4	(0x040080)	/* R/W R/W 0x0041 0000 8/16/32 */
+#define	SH4A_PCIEEXPCAP5	(0x040084)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEEXPCAP6	(0x040088)	/* R/W R/W 0x0000 03C0 8/16/32 */
+#define	SH4A_PCIEEXPCAP7	(0x04008C)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEEXPCAP8	(0x040090)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP0		(0x040100)	/* R/W R 0x1B01 0002 8/16/32 */
+#define	SH4A_PCIEVCCAP1		(0x040104)	/* R R 0x0000 0001 8/16/32 */
+#define	SH4A_PCIEVCCAP2		(0x040108)	/* R R 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP3		(0x04010C)	/* R R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP4		(0x040110)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP5		(0x040114)	/* R/W R/W 0x8000 00FF 8/16/32 */
+#define	SH4A_PCIEVCCAP6		(0x040118)	/* R/W R 0x0002 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP7		(0x04011C)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP8		(0x040120)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP9		(0x040124)	/* R/W R 0x0002 0000 8/16/32 */
+#define	SH4A_PCIENUMCAP0	(0x0001B0)	/* RW R 0x0001 0003 8/16/32 */
+#define	SH4A_PCIENUMCAP1	(0x0001B4)	/* R R 0x0000 0000 8/16/32 */
+#define	SH4A_PCIENUMCAP2	(0x0001B8)	/* R R 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEIDSETR0	(0x041000)	/* R/W R 0x0000 FFFF 16/32 */
+#define	SH4A_PCIEIDSETR1	(0x041004)	/* R/W R 0xFF00 0000 16/32 */
+#define	SH4A_PCIEBAR0SETR	(0x041008)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEBAR1SETR	(0x04100C)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEBAR2SETR	(0x041010)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEBAR3SETR	(0x041014)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEBAR4SETR	(0x041018)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEBAR5SETR	(0x04101C)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIECISSETR	(0x041020)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEIDSETR2	(0x041024)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEEROMSETR	(0x041028)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEDSERSETR0	(0x04102C)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEDSERSETR1	(0x041030)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIECTLR		(0x041040)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIETLSR		(0x041044)	/* R/W1C R 0x0000 0000 16/32 */
+#define	SH4A_PCIETLCTLR		(0x041048)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEDLSR		(0x04104C)	/* R/W1C R 0x4003 0000 16/32 */
+#define	SH4A_PCIEDLCTLR		(0x041050)	/* R R 0x0000 0000 16/32 */
+#define	SH4A_PCIEMACSR		(0x041054)	/* R/W1C R 0x0041 0000 16/32 */
+#define	SH4A_PCIEMACCTLR	(0x041058)	/* R/W R 0x0000 0000 16/32 */
+#define		PCIEMACCTLR_SCR_DIS	(1 << 27)	/* scramble disable */
+#define	SH4A_PCIEPMSTR		(0x04105C)	/* R/W1C R 0x0000 0000 16/32 */
+#define	SH4A_PCIEPMCTLR		(0x041060)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIETLINTENR	(0x041064)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEDLINTENR	(0x041068)	/* R/W R 0x0000 0000 16/32 */
+#define		PCIEDLINTENR_DLL_ACT_ENABLE	(1 << 31) /* DL active irq */
+#define	SH4A_PCIEMACINTENR	(0x04106C)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEPMINTENR	(0x041070)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIETXDCTLR	(0x044000)	/* R/W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXCTLR		(0x044020)	/* R/W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXSR		(0x044028)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXVC0DCTLR	(0x044100)	/* R/W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXVC0SR	(0x044108)	/* R/W - H'00888000_00000000 32/64 */
+#define	SH4A_PCIEVC0PDTXR	(0x044110)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0PHTXR	(0x044118)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0NPDTXR	(0x044120)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0NPHTXR	(0x044128)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0CDTXR	(0x044130)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0CHTXR	(0x044138)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXVCXDCTLR	(0x044200)	/* R/W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXVCXSR	(0x044208)	/* R/W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXPDTXR	(0x044210)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXPHTXR	(0x044218)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXNPDTXR	(0x044220)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXNPHTXR	(0x044228)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXCDTXR	(0x044230)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXCHTXR	(0x044238)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIERDCTLR		(0x046000)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEERPCTLR	(0x046008)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEERPHR		(0x046010)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEERPERR		(0x046018)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIERXVC0DCTLR	(0x046100)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIERXVC0SR	(0x046108)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0PDRXR	(0x046140)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0PHRXR	(0x046148)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0PERR	(0x046150)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0NPDRXR	(0x046158)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0NPHRXR	(0x046160)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0NPERR	(0x046168)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0CDRXR	(0x046170)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0CHRXR	(0x046178)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0CERR	(0x046180)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIERXVCXDCTLR	(0x046200)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIERXVCXSR	(0x046208)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXPDRXR	(0x046240)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXPHRXR	(0x046248)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXPERR	(0x046250)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXNPDRXR	(0x046258)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXNPHRXR	(0x046260)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXNPERR	(0x046268)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXCDRXR	(0x046270)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXCHRXR	(0x046278)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXCERR	(0x046280)	/* R H'00000000_00000000 32/64 */
+
+/* SSI Register Definition for MSI WORK AROUND --hamada */
+#define SH4A_PCI_SSI_BASE	0xFFE00000	/* spw config address	*/
+#define SH4A_PCI_SSI_BASE_LEN	0x00100000	/* 1MB			*/
+
+#define	SH4A_SSICR0		(0x000000)
+#define	SH4A_SSICR1		(0x010000)
+#define	SH4A_SSICR2		(0x020000)
+#define	SH4A_SSICR3		(0x030000)
+
+#define PCI_REG(x)		((x) + 0x40000)
+
+static inline void
+pci_write_reg(struct pci_channel *chan, unsigned long val, unsigned long reg)
+{
+	__raw_writel(val, chan->reg_base + reg);
+}
+
+static inline unsigned long
+pci_read_reg(struct pci_channel *chan, unsigned long reg)
+{
+	return __raw_readl(chan->reg_base + reg);
+}
+
+#endif /* __PCI_SH7786_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/push-switch.c b/src/kernel/linux/v4.14/arch/sh/drivers/push-switch.c
new file mode 100644
index 0000000..5bfb341
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/push-switch.c
@@ -0,0 +1,142 @@
+/*
+ * Generic push-switch framework
+ *
+ * Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <asm/push-switch.h>
+
+#define DRV_NAME "push-switch"
+#define DRV_VERSION "0.1.1"
+
+static ssize_t switch_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct push_switch_platform_info *psw_info = dev->platform_data;
+	return sprintf(buf, "%s\n", psw_info->name);
+}
+static DEVICE_ATTR(switch, S_IRUGO, switch_show, NULL);
+
+static void switch_timer(unsigned long data)
+{
+	struct push_switch *psw = (struct push_switch *)data;
+
+	schedule_work(&psw->work);
+}
+
+static void switch_work_handler(struct work_struct *work)
+{
+	struct push_switch *psw = container_of(work, struct push_switch, work);
+	struct platform_device *pdev = psw->pdev;
+
+	psw->state = 0;
+
+	kobject_uevent(&pdev->dev.kobj, KOBJ_CHANGE);
+}
+
+static int switch_drv_probe(struct platform_device *pdev)
+{
+	struct push_switch_platform_info *psw_info;
+	struct push_switch *psw;
+	int ret, irq;
+
+	psw = kzalloc(sizeof(struct push_switch), GFP_KERNEL);
+	if (unlikely(!psw))
+		return -ENOMEM;
+
+	irq = platform_get_irq(pdev, 0);
+	if (unlikely(irq < 0)) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	psw_info = pdev->dev.platform_data;
+	BUG_ON(!psw_info);
+
+	ret = request_irq(irq, psw_info->irq_handler,
+			  psw_info->irq_flags,
+			  psw_info->name ? psw_info->name : DRV_NAME, pdev);
+	if (unlikely(ret < 0))
+		goto err;
+
+	if (psw_info->name) {
+		ret = device_create_file(&pdev->dev, &dev_attr_switch);
+		if (unlikely(ret)) {
+			dev_err(&pdev->dev, "Failed creating device attrs\n");
+			ret = -EINVAL;
+			goto err_irq;
+		}
+	}
+
+	INIT_WORK(&psw->work, switch_work_handler);
+	init_timer(&psw->debounce);
+
+	psw->debounce.function = switch_timer;
+	psw->debounce.data = (unsigned long)psw;
+
+	/* Workqueue API brain-damage */
+	psw->pdev = pdev;
+
+	platform_set_drvdata(pdev, psw);
+
+	return 0;
+
+err_irq:
+	free_irq(irq, pdev);
+err:
+	kfree(psw);
+	return ret;
+}
+
+static int switch_drv_remove(struct platform_device *pdev)
+{
+	struct push_switch *psw = platform_get_drvdata(pdev);
+	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+	int irq = platform_get_irq(pdev, 0);
+
+	if (psw_info->name)
+		device_remove_file(&pdev->dev, &dev_attr_switch);
+
+	platform_set_drvdata(pdev, NULL);
+	flush_work(&psw->work);
+	del_timer_sync(&psw->debounce);
+	free_irq(irq, pdev);
+
+	kfree(psw);
+
+	return 0;
+}
+
+static struct platform_driver switch_driver = {
+	.probe		= switch_drv_probe,
+	.remove		= switch_drv_remove,
+	.driver		= {
+		.name	= DRV_NAME,
+	},
+};
+
+static int __init switch_init(void)
+{
+	printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION);
+	return platform_driver_register(&switch_driver);
+}
+
+static void __exit switch_exit(void)
+{
+	platform_driver_unregister(&switch_driver);
+}
+module_init(switch_init);
+module_exit(switch_exit);
+
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Paul Mundt");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/superhyway/Makefile b/src/kernel/linux/v4.14/arch/sh/drivers/superhyway/Makefile
new file mode 100644
index 0000000..5b8e0c7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/superhyway/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the SuperHyway specific kernel interface routines under Linux.
+#
+
+obj-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= ops-sh4-202.o
+
diff --git a/src/kernel/linux/v4.14/arch/sh/drivers/superhyway/ops-sh4-202.c b/src/kernel/linux/v4.14/arch/sh/drivers/superhyway/ops-sh4-202.c
new file mode 100644
index 0000000..6da62e9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/drivers/superhyway/ops-sh4-202.c
@@ -0,0 +1,171 @@
+/*
+ * arch/sh/drivers/superhyway/ops-sh4-202.c
+ *
+ * SuperHyway bus support for SH4-202
+ *
+ * Copyright (C) 2005  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU
+ * General Public License.  See the file "COPYING" in the main
+ * directory of this archive for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/superhyway.h>
+#include <linux/string.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+#define PHYS_EMI_CBLOCK		P4SEGADDR(0x1ec00000)
+#define PHYS_EMI_DBLOCK		P4SEGADDR(0x08000000)
+#define PHYS_FEMI_CBLOCK	P4SEGADDR(0x1f800000)
+#define PHYS_FEMI_DBLOCK	P4SEGADDR(0x00000000)
+
+#define PHYS_EPBR_BLOCK		P4SEGADDR(0x1de00000)
+#define PHYS_DMAC_BLOCK		P4SEGADDR(0x1fa00000)
+#define PHYS_PBR_BLOCK		P4SEGADDR(0x1fc00000)
+
+static struct resource emi_resources[] = {
+	[0] = {
+		.start	= PHYS_EMI_CBLOCK,
+		.end	= PHYS_EMI_CBLOCK + 0x00300000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PHYS_EMI_DBLOCK,
+		.end	= PHYS_EMI_DBLOCK + 0x08000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct superhyway_device emi_device = {
+	.name		= "emi",
+	.num_resources	= ARRAY_SIZE(emi_resources),
+	.resource	= emi_resources,
+};
+
+static struct resource femi_resources[] = {
+	[0] = {
+		.start	= PHYS_FEMI_CBLOCK,
+		.end	= PHYS_FEMI_CBLOCK + 0x00100000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PHYS_FEMI_DBLOCK,
+		.end	= PHYS_FEMI_DBLOCK + 0x08000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct superhyway_device femi_device = {
+	.name		= "femi",
+	.num_resources	= ARRAY_SIZE(femi_resources),
+	.resource	= femi_resources,
+};
+
+static struct resource epbr_resources[] = {
+	[0] = {
+		.start	= P4SEGADDR(0x1e7ffff8),
+		.end	= P4SEGADDR(0x1e7ffff8 + (sizeof(u32) * 2) - 1),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PHYS_EPBR_BLOCK,
+		.end	= PHYS_EPBR_BLOCK + 0x00a00000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct superhyway_device epbr_device = {
+	.name		= "epbr",
+	.num_resources	= ARRAY_SIZE(epbr_resources),
+	.resource	= epbr_resources,
+};
+
+static struct resource dmac_resource = {
+	.start	= PHYS_DMAC_BLOCK,
+	.end	= PHYS_DMAC_BLOCK + 0x00100000 - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct superhyway_device dmac_device = {
+	.name		= "dmac",
+	.num_resources	= 1,
+	.resource	= &dmac_resource,
+};
+
+static struct resource pbr_resources[] = {
+	[0] = {
+		.start	= P4SEGADDR(0x1ffffff8),
+		.end	= P4SEGADDR(0x1ffffff8 + (sizeof(u32) * 2) - 1),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PHYS_PBR_BLOCK,
+		.end	= PHYS_PBR_BLOCK + 0x00400000 - (sizeof(u32) * 2) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct superhyway_device pbr_device = {
+	.name		= "pbr",
+	.num_resources	= ARRAY_SIZE(pbr_resources),
+	.resource	= pbr_resources,
+};
+
+static struct superhyway_device *sh4202_devices[] __initdata = {
+	&emi_device, &femi_device, &epbr_device, &dmac_device, &pbr_device,
+};
+
+static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr)
+{
+	u32 vcrh, vcrl;
+	u64 tmp;
+
+	/*
+	 * XXX: Even though the SH4-202 Evaluation Device documentation
+	 * indicates that VCRL is mapped first with VCRH at a + 0x04
+	 * offset, the opposite seems to be true.
+	 *
+	 * Some modules (PBR and ePBR for instance) also appear to have
+	 * VCRL/VCRH flipped in the documentation, but on the SH4-202
+	 * itself it appears that these are all consistently mapped with
+	 * VCRH preceding VCRL.
+	 *
+	 * Do not trust the documentation, for it is evil.
+	 */
+	vcrh = __raw_readl(base);
+	vcrl = __raw_readl(base + sizeof(u32));
+
+	tmp = ((u64)vcrh << 32) | vcrl;
+	memcpy(vcr, &tmp, sizeof(u64));
+
+	return 0;
+}
+
+static int sh4202_write_vcr(unsigned long base, struct superhyway_vcr_info vcr)
+{
+	u64 tmp = *(u64 *)&vcr;
+
+	__raw_writel((tmp >> 32) & 0xffffffff, base);
+	__raw_writel(tmp & 0xffffffff, base + sizeof(u32));
+
+	return 0;
+}
+
+static struct superhyway_ops sh4202_superhyway_ops = {
+	.read_vcr	= sh4202_read_vcr,
+	.write_vcr	= sh4202_write_vcr,
+};
+
+struct superhyway_bus superhyway_channels[] = {
+	{ &sh4202_superhyway_ops, },
+	{ 0, },
+};
+
+int __init superhyway_scan_bus(struct superhyway_bus *bus)
+{
+	return superhyway_add_devices(bus, sh4202_devices,
+				      ARRAY_SIZE(sh4202_devices));
+}
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/Kbuild b/src/kernel/linux/v4.14/arch/sh/include/asm/Kbuild
new file mode 100644
index 0000000..1a6f9c39
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/Kbuild
@@ -0,0 +1,20 @@
+generic-y += clkdev.h
+generic-y += current.h
+generic-y += delay.h
+generic-y += div64.h
+generic-y += emergency-restart.h
+generic-y += exec.h
+generic-y += irq_regs.h
+generic-y += irq_work.h
+generic-y += local.h
+generic-y += local64.h
+generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
+generic-y += parport.h
+generic-y += percpu.h
+generic-y += preempt.h
+generic-y += rwsem.h
+generic-y += serial.h
+generic-y += sizes.h
+generic-y += trace_clock.h
+generic-y += xor.h
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/adc.h b/src/kernel/linux/v4.14/arch/sh/include/asm/adc.h
new file mode 100644
index 0000000..99ec668
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/adc.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ADC_H
+#define __ASM_ADC_H
+#ifdef __KERNEL__
+/*
+ * Copyright (C) 2004  Andriy Skulysh
+ */
+
+#include <cpu/adc.h>
+
+int adc_single(unsigned int channel);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_ADC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/addrspace.h b/src/kernel/linux/v4.14/arch/sh/include/asm/addrspace.h
new file mode 100644
index 0000000..3d1ae2b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/addrspace.h
@@ -0,0 +1,69 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Kaz Kojima
+ *
+ * Defitions for the address spaces of the SH CPUs.
+ */
+#ifndef __ASM_SH_ADDRSPACE_H
+#define __ASM_SH_ADDRSPACE_H
+
+#ifdef __KERNEL__
+
+#include <cpu/addrspace.h>
+
+/* If this CPU supports segmentation, hook up the helpers */
+#ifdef P1SEG
+
+/*
+   [ P0/U0 (virtual) ]		0x00000000     <------ User space
+   [ P1 (fixed)   cached ]	0x80000000     <------ Kernel space
+   [ P2 (fixed)  non-cachable]	0xA0000000     <------ Physical access
+   [ P3 (virtual) cached]	0xC0000000     <------ vmalloced area
+   [ P4 control   ]		0xE0000000
+ */
+
+/* Returns the privileged segment base of a given address  */
+#define PXSEG(a)	(((unsigned long)(a)) & 0xe0000000)
+
+#ifdef CONFIG_29BIT
+/*
+ * Map an address to a certain privileged segment
+ */
+#define P1SEGADDR(a)	\
+	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG))
+#define P2SEGADDR(a)	\
+	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG))
+#define P3SEGADDR(a)	\
+	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
+#define P4SEGADDR(a)	\
+	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
+#else
+/*
+ * These will never work in 32-bit, don't even bother.
+ */
+#define P1SEGADDR(a)	({ (void)(a); BUG(); NULL; })
+#define P2SEGADDR(a)	({ (void)(a); BUG(); NULL; })
+#define P3SEGADDR(a)	({ (void)(a); BUG(); NULL; })
+#define P4SEGADDR(a)	({ (void)(a); BUG(); NULL; })
+#endif
+#endif /* P1SEG */
+
+/* Check if an address can be reached in 29 bits */
+#define IS_29BIT(a)	(((unsigned long)(a)) < 0x20000000)
+
+#ifdef CONFIG_SH_STORE_QUEUES
+/*
+ * This is a special case for the SH-4 store queues, as pages for this
+ * space still need to be faulted in before it's possible to flush the
+ * store queue cache for writeout to the remapped region.
+ */
+#define P3_ADDR_MAX		(P4SEG_STORE_QUE + 0x04000000)
+#else
+#define P3_ADDR_MAX		P4SEG
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_ADDRSPACE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/alignment.h b/src/kernel/linux/v4.14/arch/sh/include/asm/alignment.h
new file mode 100644
index 0000000..4f3e715
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/alignment.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_ALIGNMENT_H
+#define __ASM_SH_ALIGNMENT_H
+
+#include <linux/types.h>
+
+extern void inc_unaligned_byte_access(void);
+extern void inc_unaligned_word_access(void);
+extern void inc_unaligned_dword_access(void);
+extern void inc_unaligned_multi_access(void);
+extern void inc_unaligned_user_access(void);
+extern void inc_unaligned_kernel_access(void);
+
+#define UM_WARN		(1 << 0)
+#define UM_FIXUP	(1 << 1)
+#define UM_SIGNAL	(1 << 2)
+
+extern unsigned int unaligned_user_action(void);
+
+extern void unaligned_fixups_notify(struct task_struct *, insn_size_t, struct pt_regs *);
+
+#endif /* __ASM_SH_ALIGNMENT_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/asm-offsets.h b/src/kernel/linux/v4.14/arch/sh/include/asm/asm-offsets.h
new file mode 100644
index 0000000..d370ee3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/asm-offsets.h
@@ -0,0 +1 @@
+#include <generated/asm-offsets.h>
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/atomic-grb.h b/src/kernel/linux/v4.14/arch/sh/include/asm/atomic-grb.h
new file mode 100644
index 0000000..aace62d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/atomic-grb.h
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_ATOMIC_GRB_H
+#define __ASM_SH_ATOMIC_GRB_H
+
+#define ATOMIC_OP(op)							\
+static inline void atomic_##op(int i, atomic_t *v)			\
+{									\
+	int tmp;							\
+									\
+	__asm__ __volatile__ (						\
+		"   .align 2              \n\t"				\
+		"   mova    1f,   r0      \n\t" /* r0 = end point */	\
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */	\
+		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */	\
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */	\
+		" " #op "   %2,   %0      \n\t" /* $op */		\
+		"   mov.l   %0,   @%1     \n\t" /* store new value */	\
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */		\
+		: "=&r" (tmp),						\
+		  "+r"  (v)						\
+		: "r"   (i)						\
+		: "memory" , "r0", "r1");				\
+}									\
+
+#define ATOMIC_OP_RETURN(op)						\
+static inline int atomic_##op##_return(int i, atomic_t *v)		\
+{									\
+	int tmp;							\
+									\
+	__asm__ __volatile__ (						\
+		"   .align 2              \n\t"				\
+		"   mova    1f,   r0      \n\t" /* r0 = end point */	\
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */	\
+		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */	\
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */	\
+		" " #op "   %2,   %0      \n\t" /* $op */		\
+		"   mov.l   %0,   @%1     \n\t" /* store new value */	\
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */		\
+		: "=&r" (tmp),						\
+		  "+r"  (v)						\
+		: "r"   (i)						\
+		: "memory" , "r0", "r1");				\
+									\
+	return tmp;							\
+}
+
+#define ATOMIC_FETCH_OP(op)						\
+static inline int atomic_fetch_##op(int i, atomic_t *v)			\
+{									\
+	int res, tmp;							\
+									\
+	__asm__ __volatile__ (						\
+		"   .align 2              \n\t"				\
+		"   mova    1f,   r0      \n\t" /* r0 = end point */	\
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */	\
+		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */	\
+		"   mov.l  @%2,   %0      \n\t" /* load old value */	\
+		"   mov     %0,   %1      \n\t" /* save old value */	\
+		" " #op "   %3,   %0      \n\t" /* $op */		\
+		"   mov.l   %0,   @%2     \n\t" /* store new value */	\
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */		\
+		: "=&r" (tmp), "=&r" (res), "+r"  (v)			\
+		: "r"   (i)						\
+		: "memory" , "r0", "r1");				\
+									\
+	return res;							\
+}
+
+#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_OP_RETURN(op) ATOMIC_FETCH_OP(op)
+
+ATOMIC_OPS(add)
+ATOMIC_OPS(sub)
+
+#undef ATOMIC_OPS
+#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_FETCH_OP(op)
+
+ATOMIC_OPS(and)
+ATOMIC_OPS(or)
+ATOMIC_OPS(xor)
+
+#undef ATOMIC_OPS
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP
+
+#endif /* __ASM_SH_ATOMIC_GRB_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/atomic-irq.h b/src/kernel/linux/v4.14/arch/sh/include/asm/atomic-irq.h
new file mode 100644
index 0000000..ee523bd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/atomic-irq.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_ATOMIC_IRQ_H
+#define __ASM_SH_ATOMIC_IRQ_H
+
+#include <linux/irqflags.h>
+
+/*
+ * To get proper branch prediction for the main line, we must branch
+ * forward to code at the end of this object's .text section, then
+ * branch back to restart the operation.
+ */
+
+#define ATOMIC_OP(op, c_op)						\
+static inline void atomic_##op(int i, atomic_t *v)			\
+{									\
+	unsigned long flags;						\
+									\
+	raw_local_irq_save(flags);					\
+	v->counter c_op i;						\
+	raw_local_irq_restore(flags);					\
+}
+
+#define ATOMIC_OP_RETURN(op, c_op)					\
+static inline int atomic_##op##_return(int i, atomic_t *v)		\
+{									\
+	unsigned long temp, flags;					\
+									\
+	raw_local_irq_save(flags);					\
+	temp = v->counter;						\
+	temp c_op i;							\
+	v->counter = temp;						\
+	raw_local_irq_restore(flags);					\
+									\
+	return temp;							\
+}
+
+#define ATOMIC_FETCH_OP(op, c_op)					\
+static inline int atomic_fetch_##op(int i, atomic_t *v)			\
+{									\
+	unsigned long temp, flags;					\
+									\
+	raw_local_irq_save(flags);					\
+	temp = v->counter;						\
+	v->counter c_op i;						\
+	raw_local_irq_restore(flags);					\
+									\
+	return temp;							\
+}
+
+#define ATOMIC_OPS(op, c_op)						\
+	ATOMIC_OP(op, c_op)						\
+	ATOMIC_OP_RETURN(op, c_op)					\
+	ATOMIC_FETCH_OP(op, c_op)
+
+ATOMIC_OPS(add, +=)
+ATOMIC_OPS(sub, -=)
+
+#undef ATOMIC_OPS
+#define ATOMIC_OPS(op, c_op)						\
+	ATOMIC_OP(op, c_op)						\
+	ATOMIC_FETCH_OP(op, c_op)
+
+ATOMIC_OPS(and, &=)
+ATOMIC_OPS(or, |=)
+ATOMIC_OPS(xor, ^=)
+
+#undef ATOMIC_OPS
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP
+
+#endif /* __ASM_SH_ATOMIC_IRQ_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/atomic-llsc.h b/src/kernel/linux/v4.14/arch/sh/include/asm/atomic-llsc.h
new file mode 100644
index 0000000..1d06e4d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/atomic-llsc.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_ATOMIC_LLSC_H
+#define __ASM_SH_ATOMIC_LLSC_H
+
+/*
+ * SH-4A note:
+ *
+ * We basically get atomic_xxx_return() for free compared with
+ * atomic_xxx(). movli.l/movco.l require r0 due to the instruction
+ * encoding, so the retval is automatically set without having to
+ * do any special work.
+ */
+/*
+ * To get proper branch prediction for the main line, we must branch
+ * forward to code at the end of this object's .text section, then
+ * branch back to restart the operation.
+ */
+
+#define ATOMIC_OP(op)							\
+static inline void atomic_##op(int i, atomic_t *v)			\
+{									\
+	unsigned long tmp;						\
+									\
+	__asm__ __volatile__ (						\
+"1:	movli.l @%2, %0		! atomic_" #op "\n"			\
+"	" #op "	%1, %0				\n"			\
+"	movco.l	%0, @%2				\n"			\
+"	bf	1b				\n"			\
+	: "=&z" (tmp)							\
+	: "r" (i), "r" (&v->counter)					\
+	: "t");								\
+}
+
+#define ATOMIC_OP_RETURN(op)						\
+static inline int atomic_##op##_return(int i, atomic_t *v)		\
+{									\
+	unsigned long temp;						\
+									\
+	__asm__ __volatile__ (						\
+"1:	movli.l @%2, %0		! atomic_" #op "_return	\n"		\
+"	" #op "	%1, %0					\n"		\
+"	movco.l	%0, @%2					\n"		\
+"	bf	1b					\n"		\
+"	synco						\n"		\
+	: "=&z" (temp)							\
+	: "r" (i), "r" (&v->counter)					\
+	: "t");								\
+									\
+	return temp;							\
+}
+
+#define ATOMIC_FETCH_OP(op)						\
+static inline int atomic_fetch_##op(int i, atomic_t *v)			\
+{									\
+	unsigned long res, temp;					\
+									\
+	__asm__ __volatile__ (						\
+"1:	movli.l @%3, %0		! atomic_fetch_" #op "	\n"		\
+"	mov %0, %1					\n"		\
+"	" #op "	%2, %0					\n"		\
+"	movco.l	%0, @%3					\n"		\
+"	bf	1b					\n"		\
+"	synco						\n"		\
+	: "=&z" (temp), "=&r" (res)					\
+	: "r" (i), "r" (&v->counter)					\
+	: "t");								\
+									\
+	return res;							\
+}
+
+#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_OP_RETURN(op) ATOMIC_FETCH_OP(op)
+
+ATOMIC_OPS(add)
+ATOMIC_OPS(sub)
+
+#undef ATOMIC_OPS
+#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_FETCH_OP(op)
+
+ATOMIC_OPS(and)
+ATOMIC_OPS(or)
+ATOMIC_OPS(xor)
+
+#undef ATOMIC_OPS
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP
+
+#endif /* __ASM_SH_ATOMIC_LLSC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/atomic.h b/src/kernel/linux/v4.14/arch/sh/include/asm/atomic.h
new file mode 100644
index 0000000..0fd0099
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/atomic.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_ATOMIC_H
+#define __ASM_SH_ATOMIC_H
+
+#if defined(CONFIG_CPU_J2)
+
+#include <asm-generic/atomic.h>
+
+#else
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ */
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/cmpxchg.h>
+#include <asm/barrier.h>
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+#define atomic_read(v)		READ_ONCE((v)->counter)
+#define atomic_set(v,i)		WRITE_ONCE((v)->counter, (i))
+
+#if defined(CONFIG_GUSA_RB)
+#include <asm/atomic-grb.h>
+#elif defined(CONFIG_CPU_SH4A)
+#include <asm/atomic-llsc.h>
+#else
+#include <asm/atomic-irq.h>
+#endif
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+#define atomic_dec_return(v)		atomic_sub_return(1, (v))
+#define atomic_inc_return(v)		atomic_add_return(1, (v))
+#define atomic_inc_and_test(v)		(atomic_inc_return(v) == 0)
+#define atomic_sub_and_test(i,v)	(atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
+
+#define atomic_inc(v)			atomic_add(1, (v))
+#define atomic_dec(v)			atomic_sub(1, (v))
+
+#define atomic_xchg(v, new)		(xchg(&((v)->counter), new))
+#define atomic_cmpxchg(v, o, n)		(cmpxchg(&((v)->counter), (o), (n)))
+
+/**
+ * __atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns the old value of @v.
+ */
+static inline int __atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+
+	return c;
+}
+
+#endif /* CONFIG_CPU_J2 */
+
+#endif /* __ASM_SH_ATOMIC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/barrier.h b/src/kernel/linux/v4.14/arch/sh/include/asm/barrier.h
new file mode 100644
index 0000000..66faae1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/barrier.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 1999, 2000  Niibe Yutaka  &  Kaz Kojima
+ * Copyright (C) 2002 Paul Mundt
+ */
+#ifndef __ASM_SH_BARRIER_H
+#define __ASM_SH_BARRIER_H
+
+#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
+#include <asm/cache_insns.h>
+#endif
+
+/*
+ * A brief note on ctrl_barrier(), the control register write barrier.
+ *
+ * Legacy SH cores typically require a sequence of 8 nops after
+ * modification of a control register in order for the changes to take
+ * effect. On newer cores (like the sh4a and sh5) this is accomplished
+ * with icbi.
+ *
+ * Also note that on sh4a in the icbi case we can forego a synco for the
+ * write barrier, as it's not necessary for control registers.
+ *
+ * Historically we have only done this type of barrier for the MMUCR, but
+ * it's also necessary for the CCR, so we make it generic here instead.
+ */
+#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
+#define mb()		__asm__ __volatile__ ("synco": : :"memory")
+#define rmb()		mb()
+#define wmb()		mb()
+#define ctrl_barrier()	__icbi(PAGE_OFFSET)
+#else
+#if defined(CONFIG_CPU_J2) && defined(CONFIG_SMP)
+#define __smp_mb()	do { int tmp = 0; __asm__ __volatile__ ("cas.l %0,%0,@%1" : "+r"(tmp) : "z"(&tmp) : "memory", "t"); } while(0)
+#define __smp_rmb()	__smp_mb()
+#define __smp_wmb()	__smp_mb()
+#endif
+#define ctrl_barrier()	__asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
+#endif
+
+#define __smp_store_mb(var, value) do { (void)xchg(&var, value); } while (0)
+
+#include <asm-generic/barrier.h>
+
+#endif /* __ASM_SH_BARRIER_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/bitops-cas.h b/src/kernel/linux/v4.14/arch/sh/include/asm/bitops-cas.h
new file mode 100644
index 0000000..ba517b3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/bitops-cas.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_BITOPS_CAS_H
+#define __ASM_SH_BITOPS_CAS_H
+
+static inline unsigned __bo_cas(volatile unsigned *p, unsigned old, unsigned new)
+{
+	__asm__ __volatile__("cas.l %1,%0,@r0"
+		: "+r"(new)
+		: "r"(old), "z"(p)
+		: "t", "memory" );
+	return new;
+}
+
+static inline void set_bit(int nr, volatile void *addr)
+{
+	unsigned mask, old;
+	volatile unsigned *a = addr;
+
+	a += nr >> 5;
+	mask = 1U << (nr & 0x1f);
+
+	do old = *a;
+	while (__bo_cas(a, old, old|mask) != old);
+}
+
+static inline void clear_bit(int nr, volatile void *addr)
+{
+	unsigned mask, old;
+	volatile unsigned *a = addr;
+
+	a += nr >> 5;
+	mask = 1U << (nr & 0x1f);
+
+	do old = *a;
+	while (__bo_cas(a, old, old&~mask) != old);
+}
+
+static inline void change_bit(int nr, volatile void *addr)
+{
+	unsigned mask, old;
+	volatile unsigned *a = addr;
+
+	a += nr >> 5;
+	mask = 1U << (nr & 0x1f);
+
+	do old = *a;
+	while (__bo_cas(a, old, old^mask) != old);
+}
+
+static inline int test_and_set_bit(int nr, volatile void *addr)
+{
+	unsigned mask, old;
+	volatile unsigned *a = addr;
+
+	a += nr >> 5;
+	mask = 1U << (nr & 0x1f);
+
+	do old = *a;
+	while (__bo_cas(a, old, old|mask) != old);
+
+	return !!(old & mask);
+}
+
+static inline int test_and_clear_bit(int nr, volatile void *addr)
+{
+	unsigned mask, old;
+	volatile unsigned *a = addr;
+
+	a += nr >> 5;
+	mask = 1U << (nr & 0x1f);
+
+	do old = *a;
+	while (__bo_cas(a, old, old&~mask) != old);
+
+	return !!(old & mask);
+}
+
+static inline int test_and_change_bit(int nr, volatile void *addr)
+{
+	unsigned mask, old;
+	volatile unsigned *a = addr;
+
+	a += nr >> 5;
+	mask = 1U << (nr & 0x1f);
+
+	do old = *a;
+	while (__bo_cas(a, old, old^mask) != old);
+
+	return !!(old & mask);
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+#endif /* __ASM_SH_BITOPS_CAS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/bitops-grb.h b/src/kernel/linux/v4.14/arch/sh/include/asm/bitops-grb.h
new file mode 100644
index 0000000..75b5980
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/bitops-grb.h
@@ -0,0 +1,173 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_BITOPS_GRB_H
+#define __ASM_SH_BITOPS_GRB_H
+
+static inline void set_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+                "   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+                "   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+                "   mov.l  @%1,   %0      \n\t" /* load  old value */
+                "   or      %2,   %0      \n\t" /* or */
+                "   mov.l   %0,   @%1     \n\t" /* store new value */
+                "1: mov     r1,   r15     \n\t" /* LOGOUT */
+                : "=&r" (tmp),
+                  "+r"  (a)
+                : "r"   (mask)
+                : "memory" , "r0", "r1");
+}
+
+static inline void clear_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+        unsigned long tmp;
+
+	a += nr >> 5;
+        mask = ~(1 << (nr & 0x1f));
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+                "   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+                "   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+                "   mov.l  @%1,   %0      \n\t" /* load  old value */
+                "   and     %2,   %0      \n\t" /* and */
+                "   mov.l   %0,   @%1     \n\t" /* store new value */
+                "1: mov     r1,   r15     \n\t" /* LOGOUT */
+                : "=&r" (tmp),
+                  "+r"  (a)
+                : "r"   (mask)
+                : "memory" , "r0", "r1");
+}
+
+static inline void change_bit(int nr, volatile void * addr)
+{
+        int     mask;
+        volatile unsigned int *a = addr;
+        unsigned long tmp;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+                "   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+                "   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+                "   mov.l  @%1,   %0      \n\t" /* load  old value */
+                "   xor     %2,   %0      \n\t" /* xor */
+                "   mov.l   %0,   @%1     \n\t" /* store new value */
+                "1: mov     r1,   r15     \n\t" /* LOGOUT */
+                : "=&r" (tmp),
+                  "+r"  (a)
+                : "r"   (mask)
+                : "memory" , "r0", "r1");
+}
+
+static inline int test_and_set_bit(int nr, volatile void * addr)
+{
+        int     mask, retval;
+	volatile unsigned int *a = addr;
+        unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+                "   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+                "   mov   #-14,   r15     \n\t" /* LOGIN: r15 = size */
+                "   mov.l  @%2,   %0      \n\t" /* load old value */
+                "   mov     %0,   %1      \n\t"
+                "   tst     %1,   %3      \n\t" /* T = ((*a & mask) == 0) */
+                "   mov    #-1,   %1      \n\t" /* retvat = -1 */
+                "   negc    %1,   %1      \n\t" /* retval = (mask & *a) != 0 */
+                "   or      %3,   %0      \n\t"
+                "   mov.l   %0,  @%2      \n\t" /* store new value */
+                "1: mov     r1,  r15      \n\t" /* LOGOUT */
+                : "=&r" (tmp),
+                  "=&r" (retval),
+                  "+r"  (a)
+                : "r"   (mask)
+                : "memory" , "r0", "r1" ,"t");
+
+        return retval;
+}
+
+static inline int test_and_clear_bit(int nr, volatile void * addr)
+{
+        int     mask, retval,not_mask;
+        volatile unsigned int *a = addr;
+        unsigned long tmp;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+
+	not_mask = ~mask;
+
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov   #-14,   r15     \n\t" /* LOGIN */
+		"   mov.l  @%2,   %0      \n\t" /* load old value */
+                "   mov     %0,   %1      \n\t" /* %1 = *a */
+                "   tst     %1,   %3      \n\t" /* T = ((*a & mask) == 0) */
+		"   mov    #-1,   %1      \n\t" /* retvat = -1 */
+                "   negc    %1,   %1      \n\t" /* retval = (mask & *a) != 0 */
+                "   and     %4,   %0      \n\t"
+                "   mov.l   %0,  @%2      \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (tmp),
+		  "=&r" (retval),
+		  "+r"  (a)
+		: "r"   (mask),
+		  "r"   (not_mask)
+		: "memory" , "r0", "r1", "t");
+
+        return retval;
+}
+
+static inline int test_and_change_bit(int nr, volatile void * addr)
+{
+        int     mask, retval;
+        volatile unsigned int *a = addr;
+        unsigned long tmp;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+                "   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+                "   mov   #-14,   r15     \n\t" /* LOGIN */
+                "   mov.l  @%2,   %0      \n\t" /* load old value */
+                "   mov     %0,   %1      \n\t" /* %1 = *a */
+                "   tst     %1,   %3      \n\t" /* T = ((*a & mask) == 0) */
+                "   mov    #-1,   %1      \n\t" /* retvat = -1 */
+                "   negc    %1,   %1      \n\t" /* retval = (mask & *a) != 0 */
+                "   xor     %3,   %0      \n\t"
+                "   mov.l   %0,  @%2      \n\t" /* store new value */
+                "1: mov     r1,   r15     \n\t" /* LOGOUT */
+                : "=&r" (tmp),
+                  "=&r" (retval),
+                  "+r"  (a)
+                : "r"   (mask)
+                : "memory" , "r0", "r1", "t");
+
+        return retval;
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+#endif /* __ASM_SH_BITOPS_GRB_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/bitops-llsc.h b/src/kernel/linux/v4.14/arch/sh/include/asm/bitops-llsc.h
new file mode 100644
index 0000000..4703684
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/bitops-llsc.h
@@ -0,0 +1,147 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_BITOPS_LLSC_H
+#define __ASM_SH_BITOPS_LLSC_H
+
+static inline void set_bit(int nr, volatile void *addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! set_bit		\n\t"
+		"or		%2, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp)
+		: "r" (a), "r" (mask)
+		: "t", "memory"
+	);
+}
+
+static inline void clear_bit(int nr, volatile void *addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! clear_bit		\n\t"
+		"and		%2, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp)
+		: "r" (a), "r" (~mask)
+		: "t", "memory"
+	);
+}
+
+static inline void change_bit(int nr, volatile void *addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! change_bit		\n\t"
+		"xor		%2, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp)
+		: "r" (a), "r" (mask)
+		: "t", "memory"
+	);
+}
+
+static inline int test_and_set_bit(int nr, volatile void *addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%2, %0	! test_and_set_bit	\n\t"
+		"mov		%0, %1				\n\t"
+		"or		%3, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
+		"bf		1b				\n\t"
+		"and		%3, %1				\n\t"
+		: "=&z" (tmp), "=&r" (retval)
+		: "r" (a), "r" (mask)
+		: "t", "memory"
+	);
+
+	return retval != 0;
+}
+
+static inline int test_and_clear_bit(int nr, volatile void *addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%2, %0	! test_and_clear_bit	\n\t"
+		"mov		%0, %1				\n\t"
+		"and		%4, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
+		"bf		1b				\n\t"
+		"and		%3, %1				\n\t"
+		"synco						\n\t"
+		: "=&z" (tmp), "=&r" (retval)
+		: "r" (a), "r" (mask), "r" (~mask)
+		: "t", "memory"
+	);
+
+	return retval != 0;
+}
+
+static inline int test_and_change_bit(int nr, volatile void *addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%2, %0	! test_and_change_bit	\n\t"
+		"mov		%0, %1				\n\t"
+		"xor		%3, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
+		"bf		1b				\n\t"
+		"and		%3, %1				\n\t"
+		"synco						\n\t"
+		: "=&z" (tmp), "=&r" (retval)
+		: "r" (a), "r" (mask)
+		: "t", "memory"
+	);
+
+	return retval != 0;
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+#endif /* __ASM_SH_BITOPS_LLSC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/bitops-op32.h b/src/kernel/linux/v4.14/arch/sh/include/asm/bitops-op32.h
new file mode 100644
index 0000000..4668803
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/bitops-op32.h
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_BITOPS_OP32_H
+#define __ASM_SH_BITOPS_OP32_H
+
+/*
+ * The bit modifying instructions on SH-2A are only capable of working
+ * with a 3-bit immediate, which signifies the shift position for the bit
+ * being worked on.
+ */
+#if defined(__BIG_ENDIAN)
+#define BITOP_LE_SWIZZLE	((BITS_PER_LONG-1) & ~0x7)
+#define BYTE_NUMBER(nr)		((nr ^ BITOP_LE_SWIZZLE) / BITS_PER_BYTE)
+#define BYTE_OFFSET(nr)		((nr ^ BITOP_LE_SWIZZLE) % BITS_PER_BYTE)
+#else
+#define BYTE_NUMBER(nr)		((nr) / BITS_PER_BYTE)
+#define BYTE_OFFSET(nr)		((nr) % BITS_PER_BYTE)
+#endif
+
+#define IS_IMMEDIATE(nr)	(__builtin_constant_p(nr))
+
+static inline void __set_bit(int nr, volatile unsigned long *addr)
+{
+	if (IS_IMMEDIATE(nr)) {
+		__asm__ __volatile__ (
+			"bset.b %1, @(%O2,%0)		! __set_bit\n\t"
+			: "+r" (addr)
+			: "i" (BYTE_OFFSET(nr)), "i" (BYTE_NUMBER(nr))
+			: "t", "memory"
+		);
+	} else {
+		unsigned long mask = BIT_MASK(nr);
+		unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+		*p |= mask;
+	}
+}
+
+static inline void __clear_bit(int nr, volatile unsigned long *addr)
+{
+	if (IS_IMMEDIATE(nr)) {
+		__asm__ __volatile__ (
+			"bclr.b %1, @(%O2,%0)		! __clear_bit\n\t"
+			: "+r" (addr)
+			: "i" (BYTE_OFFSET(nr)),
+			  "i" (BYTE_NUMBER(nr))
+			: "t", "memory"
+		);
+	} else {
+		unsigned long mask = BIT_MASK(nr);
+		unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+		*p &= ~mask;
+	}
+}
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to change
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __change_bit(int nr, volatile unsigned long *addr)
+{
+	if (IS_IMMEDIATE(nr)) {
+		__asm__ __volatile__ (
+			"bxor.b %1, @(%O2,%0)		! __change_bit\n\t"
+			: "+r" (addr)
+			: "i" (BYTE_OFFSET(nr)),
+			  "i" (BYTE_NUMBER(nr))
+			: "t", "memory"
+		);
+	} else {
+		unsigned long mask = BIT_MASK(nr);
+		unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+		*p ^= mask;
+	}
+}
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old = *p;
+
+	*p = old | mask;
+	return (old & mask) != 0;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old = *p;
+
+	*p = old & ~mask;
+	return (old & mask) != 0;
+}
+
+/* WARNING: non atomic and it can be reordered! */
+static inline int __test_and_change_bit(int nr,
+					    volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old = *p;
+
+	*p = old ^ mask;
+	return (old & mask) != 0;
+}
+
+/**
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static inline int test_bit(int nr, const volatile unsigned long *addr)
+{
+	return 1UL & (addr[BIT_WORD(nr)] >> (nr & (BITS_PER_LONG-1)));
+}
+
+#endif /* __ASM_SH_BITOPS_OP32_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/bitops.h b/src/kernel/linux/v4.14/arch/sh/include/asm/bitops.h
new file mode 100644
index 0000000..8c35782
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/bitops.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_BITOPS_H
+#define __ASM_SH_BITOPS_H
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+/* For __swab32 */
+#include <asm/byteorder.h>
+#include <asm/barrier.h>
+
+#ifdef CONFIG_GUSA_RB
+#include <asm/bitops-grb.h>
+#elif defined(CONFIG_CPU_SH2A)
+#include <asm-generic/bitops/atomic.h>
+#include <asm/bitops-op32.h>
+#elif defined(CONFIG_CPU_SH4A)
+#include <asm/bitops-llsc.h>
+#elif defined(CONFIG_CPU_J2) && defined(CONFIG_SMP)
+#include <asm/bitops-cas.h>
+#else
+#include <asm-generic/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
+#endif
+
+#ifdef CONFIG_SUPERH32
+static inline unsigned long ffz(unsigned long word)
+{
+	unsigned long result;
+
+	__asm__("1:\n\t"
+		"shlr	%1\n\t"
+		"bt/s	1b\n\t"
+		" add	#1, %0"
+		: "=r" (result), "=r" (word)
+		: "0" (~0L), "1" (word)
+		: "t");
+	return result;
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+	unsigned long result;
+
+	__asm__("1:\n\t"
+		"shlr	%1\n\t"
+		"bf/s	1b\n\t"
+		" add	#1, %0"
+		: "=r" (result), "=r" (word)
+		: "0" (~0L), "1" (word)
+		: "t");
+	return result;
+}
+#else
+static inline unsigned long ffz(unsigned long word)
+{
+	unsigned long result, __d2, __d3;
+
+        __asm__("gettr  tr0, %2\n\t"
+                "pta    $+32, tr0\n\t"
+                "andi   %1, 1, %3\n\t"
+                "beq    %3, r63, tr0\n\t"
+                "pta    $+4, tr0\n"
+                "0:\n\t"
+                "shlri.l        %1, 1, %1\n\t"
+                "addi   %0, 1, %0\n\t"
+                "andi   %1, 1, %3\n\t"
+                "beqi   %3, 1, tr0\n"
+                "1:\n\t"
+                "ptabs  %2, tr0\n\t"
+                : "=r" (result), "=r" (word), "=r" (__d2), "=r" (__d3)
+                : "0" (0L), "1" (word));
+
+	return result;
+}
+
+#include <asm-generic/bitops/__ffs.h>
+#endif
+
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/le.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_BITOPS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/bl_bit.h b/src/kernel/linux/v4.14/arch/sh/include/asm/bl_bit.h
new file mode 100644
index 0000000..7e3d816
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/bl_bit.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_BL_BIT_H
+#define __ASM_SH_BL_BIT_H
+
+#ifdef CONFIG_SUPERH32
+# include <asm/bl_bit_32.h>
+#else
+# include <asm/bl_bit_64.h>
+#endif
+
+#endif /* __ASM_SH_BL_BIT_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/bl_bit_32.h b/src/kernel/linux/v4.14/arch/sh/include/asm/bl_bit_32.h
new file mode 100644
index 0000000..1f7d225
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/bl_bit_32.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_BL_BIT_32_H
+#define __ASM_SH_BL_BIT_32_H
+
+static inline void set_bl_bit(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"or	%2, %0\n\t"
+		"and	%3, %0\n\t"
+		"ldc	%0, sr\n\t"
+		: "=&r" (__dummy0), "=r" (__dummy1)
+		: "r" (0x10000000), "r" (0xffffff0f)
+		: "memory"
+	);
+}
+
+static inline void clear_bl_bit(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"and	%2, %0\n\t"
+		"ldc	%0, sr\n\t"
+		: "=&r" (__dummy0), "=r" (__dummy1)
+		: "1" (~0x10000000)
+		: "memory"
+	);
+}
+
+#endif /* __ASM_SH_BL_BIT_32_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/bl_bit_64.h b/src/kernel/linux/v4.14/arch/sh/include/asm/bl_bit_64.h
new file mode 100644
index 0000000..6cc8711
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/bl_bit_64.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_BL_BIT_64_H
+#define __ASM_SH_BL_BIT_64_H
+
+#include <asm/processor.h>
+
+#define SR_BL_LL	0x0000000010000000LL
+
+static inline void set_bl_bit(void)
+{
+	unsigned long long __dummy0, __dummy1 = SR_BL_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "or	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+
+}
+
+static inline void clear_bl_bit(void)
+{
+	unsigned long long __dummy0, __dummy1 = ~SR_BL_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "and	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+}
+
+#endif /* __ASM_SH_BL_BIT_64_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/bug.h b/src/kernel/linux/v4.14/arch/sh/include/asm/bug.h
new file mode 100644
index 0000000..05a485c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/bug.h
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_BUG_H
+#define __ASM_SH_BUG_H
+
+#include <linux/linkage.h>
+
+#define TRAPA_BUG_OPCODE	0xc33e	/* trapa #0x3e */
+#define BUGFLAG_UNWINDER	(1 << 1)
+
+#ifdef CONFIG_GENERIC_BUG
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_WARN_ON
+
+/**
+ * _EMIT_BUG_ENTRY
+ * %1 - __FILE__
+ * %2 - __LINE__
+ * %3 - trap type
+ * %4 - sizeof(struct bug_entry)
+ *
+ * The trapa opcode itself sits in %0.
+ * The %O notation is used to avoid # generation.
+ *
+ * The offending file and line are encoded in the __bug_table section.
+ */
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#define _EMIT_BUG_ENTRY				\
+	"\t.pushsection __bug_table,\"aw\"\n"	\
+	"2:\t.long 1b, %O1\n"			\
+	"\t.short %O2, %O3\n"			\
+	"\t.org 2b+%O4\n"			\
+	"\t.popsection\n"
+#else
+#define _EMIT_BUG_ENTRY				\
+	"\t.pushsection __bug_table,\"aw\"\n"	\
+	"2:\t.long 1b\n"			\
+	"\t.short %O3\n"			\
+	"\t.org 2b+%O4\n"			\
+	"\t.popsection\n"
+#endif
+
+#define BUG()						\
+do {							\
+	__asm__ __volatile__ (				\
+		"1:\t.short %O0\n"			\
+		_EMIT_BUG_ENTRY				\
+		 :					\
+		 : "n" (TRAPA_BUG_OPCODE),		\
+		   "i" (__FILE__),			\
+		   "i" (__LINE__), "i" (0),		\
+		   "i" (sizeof(struct bug_entry)));	\
+	unreachable();					\
+} while (0)
+
+#define __WARN_FLAGS(flags)				\
+do {							\
+	__asm__ __volatile__ (				\
+		"1:\t.short %O0\n"			\
+		 _EMIT_BUG_ENTRY			\
+		 :					\
+		 : "n" (TRAPA_BUG_OPCODE),		\
+		   "i" (__FILE__),			\
+		   "i" (__LINE__),			\
+		   "i" (BUGFLAG_WARNING|(flags)),	\
+		   "i" (sizeof(struct bug_entry)));	\
+} while (0)
+
+#define WARN_ON(x) ({						\
+	int __ret_warn_on = !!(x);				\
+	if (__builtin_constant_p(__ret_warn_on)) {		\
+		if (__ret_warn_on)				\
+			__WARN();				\
+	} else {						\
+		if (unlikely(__ret_warn_on))			\
+			__WARN();				\
+	}							\
+	unlikely(__ret_warn_on);				\
+})
+
+#define UNWINDER_BUG()					\
+do {							\
+	__asm__ __volatile__ (				\
+		"1:\t.short %O0\n"			\
+		_EMIT_BUG_ENTRY				\
+		 :					\
+		 : "n" (TRAPA_BUG_OPCODE),		\
+		   "i" (__FILE__),			\
+		   "i" (__LINE__),			\
+		   "i" (BUGFLAG_UNWINDER),		\
+		   "i" (sizeof(struct bug_entry)));	\
+} while (0)
+
+#define UNWINDER_BUG_ON(x) ({					\
+	int __ret_unwinder_on = !!(x);				\
+	if (__builtin_constant_p(__ret_unwinder_on)) {		\
+		if (__ret_unwinder_on)				\
+			UNWINDER_BUG();				\
+	} else {						\
+		if (unlikely(__ret_unwinder_on))		\
+			UNWINDER_BUG();				\
+	}							\
+	unlikely(__ret_unwinder_on);				\
+})
+
+#else
+
+#define UNWINDER_BUG	BUG
+#define UNWINDER_BUG_ON	BUG_ON
+
+#endif /* CONFIG_GENERIC_BUG */
+
+#include <asm-generic/bug.h>
+
+struct pt_regs;
+
+/* arch/sh/kernel/traps.c */
+extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
+extern void die_if_kernel(const char *str, struct pt_regs *regs, long err);
+extern void die_if_no_fixup(const char *str, struct pt_regs *regs, long err);
+
+#endif /* __ASM_SH_BUG_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/bugs.h b/src/kernel/linux/v4.14/arch/sh/include/asm/bugs.h
new file mode 100644
index 0000000..030df56
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/bugs.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_BUGS_H
+#define __ASM_SH_BUGS_H
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+/*
+ * I don't know of any Super-H bugs yet.
+ */
+
+#include <asm/processor.h>
+
+extern void select_idle_routine(void);
+
+static void __init check_bugs(void)
+{
+	extern unsigned long loops_per_jiffy;
+	char *p = &init_utsname()->machine[2]; /* "sh" */
+
+	select_idle_routine();
+
+	current_cpu_data.loops_per_jiffy = loops_per_jiffy;
+
+	switch (current_cpu_data.family) {
+	case CPU_FAMILY_SH2:
+		*p++ = '2';
+		break;
+	case CPU_FAMILY_SH2A:
+		*p++ = '2';
+		*p++ = 'a';
+		break;
+	case CPU_FAMILY_SH3:
+		*p++ = '3';
+		break;
+	case CPU_FAMILY_SH4:
+		*p++ = '4';
+		break;
+	case CPU_FAMILY_SH4A:
+		*p++ = '4';
+		*p++ = 'a';
+		break;
+	case CPU_FAMILY_SH4AL_DSP:
+		*p++ = '4';
+		*p++ = 'a';
+		*p++ = 'l';
+		*p++ = '-';
+		*p++ = 'd';
+		*p++ = 's';
+		*p++ = 'p';
+		break;
+	case CPU_FAMILY_SH5:
+		*p++ = '6';
+		*p++ = '4';
+		break;
+	case CPU_FAMILY_UNKNOWN:
+		/*
+		 * Specifically use CPU_FAMILY_UNKNOWN rather than
+		 * default:, so we're able to have the compiler whine
+		 * about unhandled enumerations.
+		 */
+		break;
+	}
+
+	printk("CPU: %s\n", get_cpu_subtype(&current_cpu_data));
+
+#ifndef __LITTLE_ENDIAN__
+	/* 'eb' means 'Endian Big' */
+	*p++ = 'e';
+	*p++ = 'b';
+#endif
+	*p = '\0';
+}
+#endif /* __ASM_SH_BUGS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/cache.h b/src/kernel/linux/v4.14/arch/sh/include/asm/cache.h
new file mode 100644
index 0000000..2408ac4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/cache.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $
+ *
+ * include/asm-sh/cache.h
+ *
+ * Copyright 1999 (C) Niibe Yutaka
+ * Copyright 2002, 2003 (C) Paul Mundt
+ */
+#ifndef __ASM_SH_CACHE_H
+#define __ASM_SH_CACHE_H
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <cpu/cache.h>
+
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
+
+#ifndef __ASSEMBLY__
+struct cache_info {
+	unsigned int ways;		/* Number of cache ways */
+	unsigned int sets;		/* Number of cache sets */
+	unsigned int linesz;		/* Cache line size (bytes) */
+
+	unsigned int way_size;		/* sets * line size */
+
+	/*
+	 * way_incr is the address offset for accessing the next way
+	 * in memory mapped cache array ops.
+	 */
+	unsigned int way_incr;
+	unsigned int entry_shift;
+	unsigned int entry_mask;
+
+	/*
+	 * Compute a mask which selects the address bits which overlap between
+	 * 1. those used to select the cache set during indexing
+	 * 2. those in the physical page number.
+	 */
+	unsigned int alias_mask;
+	unsigned int n_aliases;		/* Number of aliases */
+
+	unsigned long flags;
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_CACHE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/cache_insns.h b/src/kernel/linux/v4.14/arch/sh/include/asm/cache_insns.h
new file mode 100644
index 0000000..c5a4acd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/cache_insns.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CACHE_INSNS_H
+#define __ASM_SH_CACHE_INSNS_H
+
+
+#ifdef CONFIG_SUPERH32
+# include <asm/cache_insns_32.h>
+#else
+# include <asm/cache_insns_64.h>
+#endif
+
+#endif /* __ASM_SH_CACHE_INSNS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/cache_insns_32.h b/src/kernel/linux/v4.14/arch/sh/include/asm/cache_insns_32.h
new file mode 100644
index 0000000..470880b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/cache_insns_32.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CACHE_INSNS_32_H
+#define __ASM_SH_CACHE_INSNS_32_H
+
+#include <linux/types.h>
+
+#if defined(CONFIG_CPU_SH4A)
+#define __icbi(addr)	__asm__ __volatile__ ( "icbi @%0\n\t" : : "r" (addr))
+#else
+#define __icbi(addr)	mb()
+#endif
+
+#define __ocbp(addr)	__asm__ __volatile__ ( "ocbp @%0\n\t" : : "r" (addr))
+#define __ocbi(addr)	__asm__ __volatile__ ( "ocbi @%0\n\t" : : "r" (addr))
+#define __ocbwb(addr)	__asm__ __volatile__ ( "ocbwb @%0\n\t" : : "r" (addr))
+
+static inline reg_size_t register_align(void *val)
+{
+	return (unsigned long)(signed long)val;
+}
+
+#endif /* __ASM_SH_CACHE_INSNS_32_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/cache_insns_64.h b/src/kernel/linux/v4.14/arch/sh/include/asm/cache_insns_64.h
new file mode 100644
index 0000000..70b6357
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/cache_insns_64.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_CACHE_INSNS_64_H
+#define __ASM_SH_CACHE_INSNS_64_H
+
+#define __icbi(addr)	__asm__ __volatile__ ( "icbi %0, 0\n\t" : : "r" (addr))
+#define __ocbp(addr)	__asm__ __volatile__ ( "ocbp %0, 0\n\t" : : "r" (addr))
+#define __ocbi(addr)	__asm__ __volatile__ ( "ocbi %0, 0\n\t" : : "r" (addr))
+#define __ocbwb(addr)	__asm__ __volatile__ ( "ocbwb %0, 0\n\t" : : "r" (addr))
+
+static inline reg_size_t register_align(void *val)
+{
+	return (unsigned long long)(signed long long)(signed long)val;
+}
+
+#endif /* __ASM_SH_CACHE_INSNS_64_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/cacheflush.h b/src/kernel/linux/v4.14/arch/sh/include/asm/cacheflush.h
new file mode 100644
index 0000000..d103ab5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/cacheflush.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CACHEFLUSH_H
+#define __ASM_SH_CACHEFLUSH_H
+
+#ifdef __KERNEL__
+
+#include <linux/mm.h>
+
+/*
+ * Cache flushing:
+ *
+ *  - flush_cache_all() flushes entire cache
+ *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ *  - flush_cache_dup mm(mm) handles cache flushing when forking
+ *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ *  - flush_cache_range(vma, start, end) flushes a range of pages
+ *
+ *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
+ *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
+ *  - flush_cache_sigtramp(vaddr) flushes the signal trampoline
+ */
+extern void (*local_flush_cache_all)(void *args);
+extern void (*local_flush_cache_mm)(void *args);
+extern void (*local_flush_cache_dup_mm)(void *args);
+extern void (*local_flush_cache_page)(void *args);
+extern void (*local_flush_cache_range)(void *args);
+extern void (*local_flush_dcache_page)(void *args);
+extern void (*local_flush_icache_range)(void *args);
+extern void (*local_flush_icache_page)(void *args);
+extern void (*local_flush_cache_sigtramp)(void *args);
+
+static inline void cache_noop(void *args) { }
+
+extern void (*__flush_wback_region)(void *start, int size);
+extern void (*__flush_purge_region)(void *start, int size);
+extern void (*__flush_invalidate_region)(void *start, int size);
+
+extern void flush_cache_all(void);
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_dup_mm(struct mm_struct *mm);
+extern void flush_cache_page(struct vm_area_struct *vma,
+				unsigned long addr, unsigned long pfn);
+extern void flush_cache_range(struct vm_area_struct *vma,
+				 unsigned long start, unsigned long end);
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
+extern void flush_dcache_page(struct page *page);
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_icache_page(struct vm_area_struct *vma,
+				 struct page *page);
+extern void flush_cache_sigtramp(unsigned long address);
+
+struct flusher_data {
+	struct vm_area_struct *vma;
+	unsigned long addr1, addr2;
+};
+
+#define ARCH_HAS_FLUSH_ANON_PAGE
+extern void __flush_anon_page(struct page *page, unsigned long);
+
+static inline void flush_anon_page(struct vm_area_struct *vma,
+				   struct page *page, unsigned long vmaddr)
+{
+	if (boot_cpu_data.dcache.n_aliases && PageAnon(page))
+		__flush_anon_page(page, vmaddr);
+}
+static inline void flush_kernel_vmap_range(void *addr, int size)
+{
+	__flush_wback_region(addr, size);
+}
+static inline void invalidate_kernel_vmap_range(void *addr, int size)
+{
+	__flush_invalidate_region(addr, size);
+}
+
+#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+static inline void flush_kernel_dcache_page(struct page *page)
+{
+	flush_dcache_page(page);
+}
+
+extern void copy_to_user_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long vaddr, void *dst, const void *src,
+	unsigned long len);
+
+extern void copy_from_user_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long vaddr, void *dst, const void *src,
+	unsigned long len);
+
+#define flush_cache_vmap(start, end)		local_flush_cache_all(NULL)
+#define flush_cache_vunmap(start, end)		local_flush_cache_all(NULL)
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+void kmap_coherent_init(void);
+void *kmap_coherent(struct page *page, unsigned long addr);
+void kunmap_coherent(void *kvaddr);
+
+#define PG_dcache_clean	PG_arch_1
+
+void cpu_cache_init(void);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/checksum.h b/src/kernel/linux/v4.14/arch/sh/include/asm/checksum.h
new file mode 100644
index 0000000..a460a10
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/checksum.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifdef CONFIG_SUPERH32
+# include <asm/checksum_32.h>
+#else
+# include <asm-generic/checksum.h>
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/checksum_32.h b/src/kernel/linux/v4.14/arch/sh/include/asm/checksum_32.h
new file mode 100644
index 0000000..9c84386
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/checksum_32.h
@@ -0,0 +1,212 @@
+#ifndef __ASM_SH_CHECKSUM_H
+#define __ASM_SH_CHECKSUM_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Kaz Kojima & Niibe Yutaka
+ */
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst,
+					    int len, __wsum sum,
+					    int *src_err_ptr, int *dst_err_ptr);
+
+/*
+ *	Note: when you get a NULL pointer exception here this means someone
+ *	passed in an incorrect kernel address to one of these functions.
+ *
+ *	If you use these functions directly please don't forget the
+ *	access_ok().
+ */
+static inline
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+				 int len, __wsum sum)
+{
+	return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL);
+}
+
+static inline
+__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+				   int len, __wsum sum, int *err_ptr)
+{
+	return csum_partial_copy_generic((__force const void *)src, dst,
+					len, sum, err_ptr, NULL);
+}
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int __dummy;
+	__asm__("swap.w %0, %1\n\t"
+		"extu.w	%0, %0\n\t"
+		"extu.w	%1, %1\n\t"
+		"add	%1, %0\n\t"
+		"swap.w	%0, %1\n\t"
+		"add	%1, %0\n\t"
+		"not	%0, %0\n\t"
+		: "=r" (sum), "=&r" (__dummy)
+		: "0" (sum)
+		: "t");
+	return (__force __sum16)sum;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ *      i386 version by Jorge Cwik <jorge@laser.satlink.net>, adapted
+ *      for linux by * Arnt Gulbrandsen.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int sum, __dummy0, __dummy1;
+
+	__asm__ __volatile__(
+		"mov.l	@%1+, %0\n\t"
+		"mov.l	@%1+, %3\n\t"
+		"add	#-2, %2\n\t"
+		"clrt\n\t"
+		"1:\t"
+		"addc	%3, %0\n\t"
+		"movt	%4\n\t"
+		"mov.l	@%1+, %3\n\t"
+		"dt	%2\n\t"
+		"bf/s	1b\n\t"
+		" cmp/eq #1, %4\n\t"
+		"addc	%3, %0\n\t"
+		"addc	%2, %0"	    /* Here %2 is 0, add carry-bit */
+	/* Since the input registers which are loaded with iph and ihl
+	   are modified, we must also specify them as outputs, or gcc
+	   will assume they contain their original values. */
+	: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1)
+	: "1" (iph), "2" (ihl)
+	: "t", "memory");
+
+	return	csum_fold(sum);
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+					__u32 len, __u8 proto,
+					__wsum sum)
+{
+#ifdef __LITTLE_ENDIAN__
+	unsigned long len_proto = (proto + len) << 8;
+#else
+	unsigned long len_proto = proto + len;
+#endif
+	__asm__("clrt\n\t"
+		"addc	%0, %1\n\t"
+		"addc	%2, %1\n\t"
+		"addc	%3, %1\n\t"
+		"movt	%0\n\t"
+		"add	%1, %0"
+		: "=r" (sum), "=r" (len_proto)
+		: "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum)
+		: "t");
+
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+					__u32 len, __u8 proto,
+					__wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+    return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+				      const struct in6_addr *daddr,
+				      __u32 len, __u8 proto, __wsum sum)
+{
+	unsigned int __dummy;
+	__asm__("clrt\n\t"
+		"mov.l	@(0,%2), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(4,%2), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(8,%2), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(12,%2), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(0,%3), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(4,%3), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(8,%3), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(12,%3), %1\n\t"
+		"addc	%1, %0\n\t"
+		"addc	%4, %0\n\t"
+		"addc	%5, %0\n\t"
+		"movt	%1\n\t"
+		"add	%1, %0\n"
+		: "=r" (sum), "=&r" (__dummy)
+		: "r" (saddr), "r" (daddr),
+		  "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
+		: "t");
+
+	return csum_fold(sum);
+}
+
+/*
+ *	Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static inline __wsum csum_and_copy_to_user(const void *src,
+					   void __user *dst,
+					   int len, __wsum sum,
+					   int *err_ptr)
+{
+	if (access_ok(VERIFY_WRITE, dst, len))
+		return csum_partial_copy_generic((__force const void *)src,
+						dst, len, sum, NULL, err_ptr);
+
+	if (len)
+		*err_ptr = -EFAULT;
+
+	return (__force __wsum)-1; /* invalid checksum */
+}
+#endif /* __ASM_SH_CHECKSUM_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/clock.h b/src/kernel/linux/v4.14/arch/sh/include/asm/clock.h
new file mode 100644
index 0000000..b65bc29
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/clock.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CLOCK_H
+#define __ASM_SH_CLOCK_H
+
+#include <linux/sh_clk.h>
+
+/* Should be defined by processor-specific code */
+void __deprecated arch_init_clk_ops(struct sh_clk_ops **, int type);
+int __init arch_clk_init(void);
+
+/* arch/sh/kernel/cpu/clock-cpg.c */
+int __init __deprecated cpg_clk_init(void);
+
+/* arch/sh/kernel/cpu/clock.c */
+int clk_init(void);
+
+#endif /* __ASM_SH_CLOCK_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg-cas.h b/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg-cas.h
new file mode 100644
index 0000000..f508db6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg-cas.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CMPXCHG_CAS_H
+#define __ASM_SH_CMPXCHG_CAS_H
+
+static inline unsigned long
+__cmpxchg_u32(volatile u32 *m, unsigned long old, unsigned long new)
+{
+	__asm__ __volatile__("cas.l %1,%0,@r0"
+		: "+r"(new)
+		: "r"(old), "z"(m)
+		: "t", "memory" );
+	return new;
+}
+
+static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
+{
+	unsigned long old;
+	do old = *m;
+	while (__cmpxchg_u32(m, old, val) != old);
+	return old;
+}
+
+#include <asm/cmpxchg-xchg.h>
+
+#endif /* __ASM_SH_CMPXCHG_CAS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg-grb.h b/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg-grb.h
new file mode 100644
index 0000000..e12279e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg-grb.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CMPXCHG_GRB_H
+#define __ASM_SH_CMPXCHG_GRB_H
+
+static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__ (
+		"   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   nop                   \n\t"
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-4,   r15     \n\t" /* LOGIN */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   mov.l   %2,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (retval),
+		  "+r"  (m),
+		  "+r"  (val)		/* inhibit r15 overloading */
+		:
+		: "memory", "r0", "r1");
+
+	return retval;
+}
+
+static inline unsigned long xchg_u16(volatile u16 *m, unsigned long val)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__ (
+		"   .align  2             \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN */
+		"   mov.w  @%1,   %0      \n\t" /* load  old value */
+		"   extu.w  %0,   %0      \n\t" /* extend as unsigned */
+		"   mov.w   %2,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (retval),
+		  "+r"  (m),
+		  "+r"  (val)		/* inhibit r15 overloading */
+		:
+		: "memory" , "r0", "r1");
+
+	return retval;
+}
+
+static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__ (
+		"   .align  2             \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN */
+		"   mov.b  @%1,   %0      \n\t" /* load  old value */
+		"   extu.b  %0,   %0      \n\t" /* extend as unsigned */
+		"   mov.b   %2,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (retval),
+		  "+r"  (m),
+		  "+r"  (val)		/* inhibit r15 overloading */
+		:
+		: "memory" , "r0", "r1");
+
+	return retval;
+}
+
+static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
+					  unsigned long new)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__ (
+		"   .align  2             \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   nop                   \n\t"
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-8,   r15     \n\t" /* LOGIN */
+		"   mov.l  @%3,   %0      \n\t" /* load  old value */
+		"   cmp/eq  %0,   %1      \n\t"
+		"   bf            1f      \n\t" /* if not equal */
+		"   mov.l   %2,   @%3     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (retval),
+		  "+r"  (old), "+r"  (new) /* old or new can be r15 */
+		:  "r"  (m)
+		: "memory" , "r0", "r1", "t");
+
+	return retval;
+}
+
+#endif /* __ASM_SH_CMPXCHG_GRB_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg-irq.h b/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg-irq.h
new file mode 100644
index 0000000..07d3e7f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg-irq.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CMPXCHG_IRQ_H
+#define __ASM_SH_CMPXCHG_IRQ_H
+
+#include <linux/irqflags.h>
+
+static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
+{
+	unsigned long flags, retval;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val;
+	local_irq_restore(flags);
+	return retval;
+}
+
+static inline unsigned long xchg_u16(volatile u16 *m, unsigned long val)
+{
+	unsigned long flags, retval;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val;
+	local_irq_restore(flags);
+	return retval;
+}
+
+static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
+{
+	unsigned long flags, retval;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val & 0xff;
+	local_irq_restore(flags);
+	return retval;
+}
+
+static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
+	unsigned long new)
+{
+	__u32 retval;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	retval = *m;
+	if (retval == old)
+		*m = new;
+	local_irq_restore(flags);       /* implies memory barrier  */
+	return retval;
+}
+
+#endif /* __ASM_SH_CMPXCHG_IRQ_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg-llsc.h b/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg-llsc.h
new file mode 100644
index 0000000..d5270cd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg-llsc.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CMPXCHG_LLSC_H
+#define __ASM_SH_CMPXCHG_LLSC_H
+
+static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
+{
+	unsigned long retval;
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"1:					\n\t"
+		"movli.l	@%2, %0	! xchg_u32	\n\t"
+		"mov		%0, %1			\n\t"
+		"mov		%3, %0			\n\t"
+		"movco.l	%0, @%2			\n\t"
+		"bf		1b			\n\t"
+		"synco					\n\t"
+		: "=&z"(tmp), "=&r" (retval)
+		: "r" (m), "r" (val)
+		: "t", "memory"
+	);
+
+	return retval;
+}
+
+static inline unsigned long
+__cmpxchg_u32(volatile u32 *m, unsigned long old, unsigned long new)
+{
+	unsigned long retval;
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%2, %0	! __cmpxchg_u32		\n\t"
+		"mov		%0, %1				\n\t"
+		"cmp/eq		%1, %3				\n\t"
+		"bf		2f				\n\t"
+		"mov		%4, %0				\n\t"
+		"2:						\n\t"
+		"movco.l	%0, @%2				\n\t"
+		"bf		1b				\n\t"
+		"synco						\n\t"
+		: "=&z" (tmp), "=&r" (retval)
+		: "r" (m), "r" (old), "r" (new)
+		: "t", "memory"
+	);
+
+	return retval;
+}
+
+#include <asm/cmpxchg-xchg.h>
+
+#endif /* __ASM_SH_CMPXCHG_LLSC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg-xchg.h b/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg-xchg.h
new file mode 100644
index 0000000..1e881f5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg-xchg.h
@@ -0,0 +1,51 @@
+#ifndef __ASM_SH_CMPXCHG_XCHG_H
+#define __ASM_SH_CMPXCHG_XCHG_H
+
+/*
+ * Copyright (C) 2016 Red Hat, Inc.
+ * Author: Michael S. Tsirkin <mst@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See the
+ * file "COPYING" in the main directory of this archive for more details.
+ */
+#include <linux/bitops.h>
+#include <asm/byteorder.h>
+
+/*
+ * Portable implementations of 1 and 2 byte xchg using a 4 byte cmpxchg.
+ * Note: this header isn't self-contained: before including it, __cmpxchg_u32
+ * must be defined first.
+ */
+static inline u32 __xchg_cmpxchg(volatile void *ptr, u32 x, int size)
+{
+	int off = (unsigned long)ptr % sizeof(u32);
+	volatile u32 *p = ptr - off;
+#ifdef __BIG_ENDIAN
+	int bitoff = (sizeof(u32) - size - off) * BITS_PER_BYTE;
+#else
+	int bitoff = off * BITS_PER_BYTE;
+#endif
+	u32 bitmask = ((0x1 << size * BITS_PER_BYTE) - 1) << bitoff;
+	u32 oldv, newv;
+	u32 ret;
+
+	do {
+		oldv = READ_ONCE(*p);
+		ret = (oldv & bitmask) >> bitoff;
+		newv = (oldv & ~bitmask) | (x << bitoff);
+	} while (__cmpxchg_u32(p, oldv, newv) != oldv);
+
+	return ret;
+}
+
+static inline unsigned long xchg_u16(volatile u16 *m, unsigned long val)
+{
+	return __xchg_cmpxchg(m, val, sizeof *m);
+}
+
+static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
+{
+	return __xchg_cmpxchg(m, val, sizeof *m);
+}
+
+#endif /* __ASM_SH_CMPXCHG_XCHG_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg.h b/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg.h
new file mode 100644
index 0000000..e9501d8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/cmpxchg.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CMPXCHG_H
+#define __ASM_SH_CMPXCHG_H
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#if defined(CONFIG_GUSA_RB)
+#include <asm/cmpxchg-grb.h>
+#elif defined(CONFIG_CPU_SH4A)
+#include <asm/cmpxchg-llsc.h>
+#elif defined(CONFIG_CPU_J2) && defined(CONFIG_SMP)
+#include <asm/cmpxchg-cas.h>
+#else
+#include <asm/cmpxchg-irq.h>
+#endif
+
+extern void __xchg_called_with_bad_pointer(void);
+
+#define __xchg(ptr, x, size)				\
+({							\
+	unsigned long __xchg__res;			\
+	volatile void *__xchg_ptr = (ptr);		\
+	switch (size) {					\
+	case 4:						\
+		__xchg__res = xchg_u32(__xchg_ptr, x);	\
+		break;					\
+	case 2:						\
+		__xchg__res = xchg_u16(__xchg_ptr, x);	\
+		break;					\
+	case 1:						\
+		__xchg__res = xchg_u8(__xchg_ptr, x);	\
+		break;					\
+	default:					\
+		__xchg_called_with_bad_pointer();	\
+		__xchg__res = x;			\
+		break;					\
+	}						\
+							\
+	__xchg__res;					\
+})
+
+#define xchg(ptr,x)	\
+	((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr))))
+
+/* This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg(). */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
+		unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+#endif /* __ASM_SH_CMPXCHG_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/device.h b/src/kernel/linux/v4.14/arch/sh/include/asm/device.h
new file mode 100644
index 0000000..071bcb4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/device.h
@@ -0,0 +1,18 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#ifndef __ASM_SH_DEVICE_H
+#define __ASM_SH_DEVICE_H
+
+#include <asm-generic/device.h>
+
+struct platform_device;
+/* allocate contiguous memory chunk and fill in struct resource */
+int platform_resource_setup_memory(struct platform_device *pdev,
+				   char *name, unsigned long memsize);
+
+void plat_early_device_setup(void);
+
+#endif /* __ASM_SH_DEVICE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/dma-mapping.h b/src/kernel/linux/v4.14/arch/sh/include/asm/dma-mapping.h
new file mode 100644
index 0000000..68c1536
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/dma-mapping.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_DMA_MAPPING_H
+#define __ASM_SH_DMA_MAPPING_H
+
+extern const struct dma_map_ops *dma_ops;
+extern void no_iommu_init(void);
+
+static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
+{
+	return dma_ops;
+}
+
+void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+		    enum dma_data_direction dir);
+
+/* arch/sh/mm/consistent.c */
+extern void *dma_generic_alloc_coherent(struct device *dev, size_t size,
+					dma_addr_t *dma_addr, gfp_t flag,
+					unsigned long attrs);
+extern void dma_generic_free_coherent(struct device *dev, size_t size,
+				      void *vaddr, dma_addr_t dma_handle,
+				      unsigned long attrs);
+
+#endif /* __ASM_SH_DMA_MAPPING_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/dma-register.h b/src/kernel/linux/v4.14/arch/sh/include/asm/dma-register.h
new file mode 100644
index 0000000..c757b47
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/dma-register.h
@@ -0,0 +1,53 @@
+/*
+ * Common header for the legacy SH DMA driver and the new dmaengine driver
+ *
+ * extracted from arch/sh/include/asm/dma-sh.h:
+ *
+ * Copyright (C) 2000  Takashi YOSHII
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef DMA_REGISTER_H
+#define DMA_REGISTER_H
+
+/* DMA registers */
+#define SAR	0x00	/* Source Address Register */
+#define DAR	0x04	/* Destination Address Register */
+#define TCR	0x08	/* Transfer Count Register */
+#define CHCR	0x0C	/* Channel Control Register */
+#define DMAOR	0x40	/* DMA Operation Register */
+
+/* DMAOR definitions */
+#define DMAOR_AE	0x00000004	/* Address Error Flag */
+#define DMAOR_NMIF	0x00000002
+#define DMAOR_DME	0x00000001	/* DMA Master Enable */
+
+/* Definitions for the SuperH DMAC */
+#define REQ_L	0x00000000
+#define REQ_E	0x00080000
+#define RACK_H	0x00000000
+#define RACK_L	0x00040000
+#define ACK_R	0x00000000
+#define ACK_W	0x00020000
+#define ACK_H	0x00000000
+#define ACK_L	0x00010000
+#define DM_INC	0x00004000	/* Destination addresses are incremented */
+#define DM_DEC	0x00008000	/* Destination addresses are decremented */
+#define DM_FIX	0x0000c000	/* Destination address is fixed */
+#define SM_INC	0x00001000	/* Source addresses are incremented */
+#define SM_DEC	0x00002000	/* Source addresses are decremented */
+#define SM_FIX	0x00003000	/* Source address is fixed */
+#define RS_IN	0x00000200
+#define RS_OUT	0x00000300
+#define RS_AUTO	0x00000400	/* Auto Request */
+#define RS_ERS	0x00000800	/* DMA extended resource selector */
+#define TS_BLK	0x00000040
+#define TM_BUR	0x00000020
+#define CHCR_DE	0x00000001	/* DMA Enable */
+#define CHCR_TE	0x00000002	/* Transfer End Flag */
+#define CHCR_IE	0x00000004	/* Interrupt Enable */
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/dma.h b/src/kernel/linux/v4.14/arch/sh/include/asm/dma.h
new file mode 100644
index 0000000..fb6e4f7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/dma.h
@@ -0,0 +1,151 @@
+/*
+ * include/asm-sh/dma.h
+ *
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_DMA_H
+#define __ASM_SH_DMA_H
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <asm-generic/dma.h>
+
+/*
+ * Read and write modes can mean drastically different things depending on the
+ * channel configuration. Consult your DMAC documentation and module
+ * implementation for further clues.
+ */
+#define DMA_MODE_READ		0x00
+#define DMA_MODE_WRITE		0x01
+#define DMA_MODE_MASK		0x01
+
+#define DMA_AUTOINIT		0x10
+
+/*
+ * DMAC (dma_info) flags
+ */
+enum {
+	DMAC_CHANNELS_CONFIGURED	= 0x01,
+	DMAC_CHANNELS_TEI_CAPABLE	= 0x02,	/* Transfer end interrupt */
+};
+
+/*
+ * DMA channel capabilities / flags
+ */
+enum {
+	DMA_CONFIGURED			= 0x01,
+
+	/*
+	 * Transfer end interrupt, inherited from DMAC.
+	 * wait_queue used in dma_wait_for_completion.
+	 */
+	DMA_TEI_CAPABLE			= 0x02,
+};
+
+extern spinlock_t dma_spin_lock;
+
+struct dma_channel;
+
+struct dma_ops {
+	int (*request)(struct dma_channel *chan);
+	void (*free)(struct dma_channel *chan);
+
+	int (*get_residue)(struct dma_channel *chan);
+	int (*xfer)(struct dma_channel *chan);
+	int (*configure)(struct dma_channel *chan, unsigned long flags);
+	int (*extend)(struct dma_channel *chan, unsigned long op, void *param);
+};
+
+struct dma_channel {
+	char dev_id[16];		/* unique name per DMAC of channel */
+
+	unsigned int chan;		/* DMAC channel number */
+	unsigned int vchan;		/* Virtual channel number */
+
+	unsigned int mode;
+	unsigned int count;
+
+	unsigned long sar;
+	unsigned long dar;
+
+	const char **caps;
+
+	unsigned long flags;
+	atomic_t busy;
+
+	wait_queue_head_t wait_queue;
+
+	struct device dev;
+	void *priv_data;
+};
+
+struct dma_info {
+	struct platform_device *pdev;
+
+	const char *name;
+	unsigned int nr_channels;
+	unsigned long flags;
+
+	struct dma_ops *ops;
+	struct dma_channel *channels;
+
+	struct list_head list;
+	int first_channel_nr;
+	int first_vchannel_nr;
+};
+
+struct dma_chan_caps {
+	int ch_num;
+	const char **caplist;
+};
+
+#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev)
+
+/* arch/sh/drivers/dma/dma-api.c */
+extern int dma_xfer(unsigned int chan, unsigned long from,
+		    unsigned long to, size_t size, unsigned int mode);
+
+#define dma_write(chan, from, to, size)	\
+	dma_xfer(chan, from, to, size, DMA_MODE_WRITE)
+#define dma_write_page(chan, from, to)	\
+	dma_write(chan, from, to, PAGE_SIZE)
+
+#define dma_read(chan, from, to, size)	\
+	dma_xfer(chan, from, to, size, DMA_MODE_READ)
+#define dma_read_page(chan, from, to)	\
+	dma_read(chan, from, to, PAGE_SIZE)
+
+extern int request_dma_bycap(const char **dmac, const char **caps,
+			     const char *dev_id);
+extern int get_dma_residue(unsigned int chan);
+extern struct dma_info *get_dma_info(unsigned int chan);
+extern struct dma_channel *get_dma_channel(unsigned int chan);
+extern void dma_wait_for_completion(unsigned int chan);
+extern void dma_configure_channel(unsigned int chan, unsigned long flags);
+
+extern int register_dmac(struct dma_info *info);
+extern void unregister_dmac(struct dma_info *info);
+extern struct dma_info *get_dma_info_by_name(const char *dmac_name);
+
+extern int dma_extend(unsigned int chan, unsigned long op, void *param);
+extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist);
+
+/* arch/sh/drivers/dma/dma-sysfs.c */
+extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *);
+extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *);
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_DMA_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/dmabrg.h b/src/kernel/linux/v4.14/arch/sh/include/asm/dmabrg.h
new file mode 100644
index 0000000..69e119c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/dmabrg.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * SH7760 DMABRG (USB/Audio) support
+ */
+
+#ifndef _DMABRG_H_
+#define _DMABRG_H_
+
+/* IRQ sources */
+#define DMABRGIRQ_USBDMA	0
+#define DMABRGIRQ_USBDMAERR	1
+#define DMABRGIRQ_A0TXF		2
+#define DMABRGIRQ_A0TXH		3
+#define DMABRGIRQ_A0RXF		4
+#define DMABRGIRQ_A0RXH		5
+#define DMABRGIRQ_A1TXF		6
+#define DMABRGIRQ_A1TXH		7
+#define DMABRGIRQ_A1RXF		8
+#define DMABRGIRQ_A1RXH		9
+
+extern int dmabrg_request_irq(unsigned int, void(*)(void *), void *);
+extern void dmabrg_free_irq(unsigned int);
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/dwarf.h b/src/kernel/linux/v4.14/arch/sh/include/asm/dwarf.h
new file mode 100644
index 0000000..d62abd1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/dwarf.h
@@ -0,0 +1,421 @@
+/*
+ * Copyright (C) 2009 Matt Fleming <matt@console-pimps.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#ifndef __ASM_SH_DWARF_H
+#define __ASM_SH_DWARF_H
+
+#ifdef CONFIG_DWARF_UNWINDER
+
+/*
+ * DWARF expression operations
+ */
+#define DW_OP_addr	0x03
+#define DW_OP_deref	0x06
+#define DW_OP_const1u	0x08
+#define DW_OP_const1s	0x09
+#define DW_OP_const2u	0x0a
+#define DW_OP_const2s	0x0b
+#define DW_OP_const4u	0x0c
+#define DW_OP_const4s	0x0d
+#define DW_OP_const8u	0x0e
+#define DW_OP_const8s	0x0f
+#define DW_OP_constu	0x10
+#define DW_OP_consts	0x11
+#define DW_OP_dup	0x12
+#define DW_OP_drop	0x13
+#define DW_OP_over	0x14
+#define DW_OP_pick	0x15
+#define DW_OP_swap	0x16
+#define DW_OP_rot	0x17
+#define DW_OP_xderef	0x18
+#define DW_OP_abs	0x19
+#define DW_OP_and	0x1a
+#define DW_OP_div	0x1b
+#define DW_OP_minus	0x1c
+#define DW_OP_mod	0x1d
+#define DW_OP_mul	0x1e
+#define DW_OP_neg	0x1f
+#define DW_OP_not	0x20
+#define DW_OP_or	0x21
+#define DW_OP_plus	0x22
+#define DW_OP_plus_uconst	0x23
+#define DW_OP_shl	0x24
+#define DW_OP_shr	0x25
+#define DW_OP_shra	0x26
+#define DW_OP_xor	0x27
+#define DW_OP_skip	0x2f
+#define DW_OP_bra	0x28
+#define DW_OP_eq	0x29
+#define DW_OP_ge	0x2a
+#define DW_OP_gt	0x2b
+#define DW_OP_le	0x2c
+#define DW_OP_lt	0x2d
+#define DW_OP_ne	0x2e
+#define DW_OP_lit0	0x30
+#define DW_OP_lit1	0x31
+#define DW_OP_lit2	0x32
+#define DW_OP_lit3	0x33
+#define DW_OP_lit4	0x34
+#define DW_OP_lit5	0x35
+#define DW_OP_lit6	0x36
+#define DW_OP_lit7	0x37
+#define DW_OP_lit8	0x38
+#define DW_OP_lit9	0x39
+#define DW_OP_lit10	0x3a
+#define DW_OP_lit11	0x3b
+#define DW_OP_lit12	0x3c
+#define DW_OP_lit13	0x3d
+#define DW_OP_lit14	0x3e
+#define DW_OP_lit15	0x3f
+#define DW_OP_lit16	0x40
+#define DW_OP_lit17	0x41
+#define DW_OP_lit18	0x42
+#define DW_OP_lit19	0x43
+#define DW_OP_lit20	0x44
+#define DW_OP_lit21	0x45
+#define DW_OP_lit22	0x46
+#define DW_OP_lit23	0x47
+#define DW_OP_lit24	0x48
+#define DW_OP_lit25	0x49
+#define DW_OP_lit26	0x4a
+#define DW_OP_lit27	0x4b
+#define DW_OP_lit28	0x4c
+#define DW_OP_lit29	0x4d
+#define DW_OP_lit30	0x4e
+#define DW_OP_lit31	0x4f
+#define DW_OP_reg0	0x50
+#define DW_OP_reg1	0x51
+#define DW_OP_reg2	0x52
+#define DW_OP_reg3	0x53
+#define DW_OP_reg4	0x54
+#define DW_OP_reg5	0x55
+#define DW_OP_reg6	0x56
+#define DW_OP_reg7	0x57
+#define DW_OP_reg8	0x58
+#define DW_OP_reg9	0x59
+#define DW_OP_reg10	0x5a
+#define DW_OP_reg11	0x5b
+#define DW_OP_reg12	0x5c
+#define DW_OP_reg13	0x5d
+#define DW_OP_reg14	0x5e
+#define DW_OP_reg15	0x5f
+#define DW_OP_reg16	0x60
+#define DW_OP_reg17	0x61
+#define DW_OP_reg18	0x62
+#define DW_OP_reg19	0x63
+#define DW_OP_reg20	0x64
+#define DW_OP_reg21	0x65
+#define DW_OP_reg22	0x66
+#define DW_OP_reg23	0x67
+#define DW_OP_reg24	0x68
+#define DW_OP_reg25	0x69
+#define DW_OP_reg26	0x6a
+#define DW_OP_reg27	0x6b
+#define DW_OP_reg28	0x6c
+#define DW_OP_reg29	0x6d
+#define DW_OP_reg30	0x6e
+#define DW_OP_reg31	0x6f
+#define DW_OP_breg0	0x70
+#define DW_OP_breg1	0x71
+#define DW_OP_breg2	0x72
+#define DW_OP_breg3	0x73
+#define DW_OP_breg4	0x74
+#define DW_OP_breg5	0x75
+#define DW_OP_breg6	0x76
+#define DW_OP_breg7	0x77
+#define DW_OP_breg8	0x78
+#define DW_OP_breg9	0x79
+#define DW_OP_breg10	0x7a
+#define DW_OP_breg11	0x7b
+#define DW_OP_breg12	0x7c
+#define DW_OP_breg13	0x7d
+#define DW_OP_breg14	0x7e
+#define DW_OP_breg15	0x7f
+#define DW_OP_breg16	0x80
+#define DW_OP_breg17	0x81
+#define DW_OP_breg18	0x82
+#define DW_OP_breg19	0x83
+#define DW_OP_breg20	0x84
+#define DW_OP_breg21	0x85
+#define DW_OP_breg22	0x86
+#define DW_OP_breg23	0x87
+#define DW_OP_breg24	0x88
+#define DW_OP_breg25	0x89
+#define DW_OP_breg26	0x8a
+#define DW_OP_breg27	0x8b
+#define DW_OP_breg28	0x8c
+#define DW_OP_breg29	0x8d
+#define DW_OP_breg30	0x8e
+#define DW_OP_breg31	0x8f
+#define DW_OP_regx	0x90
+#define DW_OP_fbreg	0x91
+#define DW_OP_bregx	0x92
+#define DW_OP_piece	0x93
+#define DW_OP_deref_size	0x94
+#define DW_OP_xderef_size	0x95
+#define DW_OP_nop	0x96
+#define DW_OP_push_object_address	0x97
+#define DW_OP_call2	0x98
+#define DW_OP_call4	0x99
+#define DW_OP_call_ref	0x9a
+#define DW_OP_form_tls_address	0x9b
+#define DW_OP_call_frame_cfa	0x9c
+#define DW_OP_bit_piece	0x9d
+#define DW_OP_lo_user	0xe0
+#define DW_OP_hi_user	0xff
+
+/*
+ * Addresses used in FDE entries in the .eh_frame section may be encoded
+ * using one of the following encodings.
+ */
+#define DW_EH_PE_absptr	0x00
+#define DW_EH_PE_omit	0xff
+#define DW_EH_PE_uleb128	0x01
+#define DW_EH_PE_udata2	0x02
+#define DW_EH_PE_udata4	0x03
+#define DW_EH_PE_udata8	0x04
+#define DW_EH_PE_sleb128	0x09
+#define DW_EH_PE_sdata2	0x0a
+#define DW_EH_PE_sdata4	0x0b
+#define DW_EH_PE_sdata8	0x0c
+#define DW_EH_PE_signed	0x09
+
+#define DW_EH_PE_pcrel	0x10
+
+/*
+ * The architecture-specific register number that contains the return
+ * address in the .debug_frame table.
+ */
+#define DWARF_ARCH_RA_REG	17
+
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <linux/bug.h>
+#include <linux/list.h>
+#include <linux/module.h>
+
+/*
+ * Read either the frame pointer (r14) or the stack pointer (r15).
+ * NOTE: this MUST be inlined.
+ */
+static __always_inline unsigned long dwarf_read_arch_reg(unsigned int reg)
+{
+	unsigned long value = 0;
+
+	switch (reg) {
+	case 14:
+		__asm__ __volatile__("mov r14, %0\n" : "=r" (value));
+		break;
+	case 15:
+		__asm__ __volatile__("mov r15, %0\n" : "=r" (value));
+		break;
+	default:
+		BUG();
+	}
+
+	return value;
+}
+
+/**
+ *	dwarf_cie - Common Information Entry
+ */
+struct dwarf_cie {
+	unsigned long length;
+	unsigned long cie_id;
+	unsigned char version;
+	const char *augmentation;
+	unsigned int code_alignment_factor;
+	int data_alignment_factor;
+
+	/* Which column in the rule table represents return addr of func. */
+	unsigned int return_address_reg;
+
+	unsigned char *initial_instructions;
+	unsigned char *instructions_end;
+
+	unsigned char encoding;
+
+	unsigned long cie_pointer;
+
+	unsigned long flags;
+#define DWARF_CIE_Z_AUGMENTATION	(1 << 0)
+
+	/* linked-list entry if this CIE is from a module */
+	struct list_head link;
+
+	struct rb_node node;
+};
+
+/**
+ *	dwarf_fde - Frame Description Entry
+ */
+struct dwarf_fde {
+	unsigned long length;
+	unsigned long cie_pointer;
+	struct dwarf_cie *cie;
+	unsigned long initial_location;
+	unsigned long address_range;
+	unsigned char *instructions;
+	unsigned char *end;
+
+	/* linked-list entry if this FDE is from a module */
+	struct list_head link;
+
+	struct rb_node node;
+};
+
+/**
+ *	dwarf_frame - DWARF information for a frame in the call stack
+ */
+struct dwarf_frame {
+	struct dwarf_frame *prev, *next;
+
+	unsigned long pc;
+
+	struct list_head reg_list;
+
+	unsigned long cfa;
+
+	/* Valid when DW_FRAME_CFA_REG_OFFSET is set in flags */
+	unsigned int cfa_register;
+	unsigned int cfa_offset;
+
+	/* Valid when DW_FRAME_CFA_REG_EXP is set in flags */
+	unsigned char *cfa_expr;
+	unsigned int cfa_expr_len;
+
+	unsigned long flags;
+#define DWARF_FRAME_CFA_REG_OFFSET	(1 << 0)
+#define DWARF_FRAME_CFA_REG_EXP		(1 << 1)
+
+	unsigned long return_addr;
+};
+
+/**
+ *	dwarf_reg - DWARF register
+ *	@flags: Describes how to calculate the value of this register
+ */
+struct dwarf_reg {
+	struct list_head link;
+
+	unsigned int number;
+
+	unsigned long addr;
+	unsigned long flags;
+#define DWARF_REG_OFFSET	(1 << 0)
+#define DWARF_VAL_OFFSET	(1 << 1)
+#define DWARF_UNDEFINED		(1 << 2)
+};
+
+/*
+ * Call Frame instruction opcodes.
+ */
+#define DW_CFA_advance_loc	0x40
+#define DW_CFA_offset		0x80
+#define DW_CFA_restore		0xc0
+#define DW_CFA_nop		0x00
+#define DW_CFA_set_loc		0x01
+#define DW_CFA_advance_loc1	0x02
+#define DW_CFA_advance_loc2	0x03
+#define DW_CFA_advance_loc4	0x04
+#define DW_CFA_offset_extended	0x05
+#define DW_CFA_restore_extended	0x06
+#define DW_CFA_undefined	0x07
+#define DW_CFA_same_value	0x08
+#define DW_CFA_register		0x09
+#define DW_CFA_remember_state	0x0a
+#define DW_CFA_restore_state	0x0b
+#define DW_CFA_def_cfa		0x0c
+#define DW_CFA_def_cfa_register	0x0d
+#define DW_CFA_def_cfa_offset	0x0e
+#define DW_CFA_def_cfa_expression	0x0f
+#define DW_CFA_expression	0x10
+#define DW_CFA_offset_extended_sf	0x11
+#define DW_CFA_def_cfa_sf	0x12
+#define DW_CFA_def_cfa_offset_sf	0x13
+#define DW_CFA_val_offset	0x14
+#define DW_CFA_val_offset_sf	0x15
+#define DW_CFA_val_expression	0x16
+#define DW_CFA_lo_user		0x1c
+#define DW_CFA_hi_user		0x3f
+
+/* GNU extension opcodes  */
+#define DW_CFA_GNU_args_size	0x2e
+#define DW_CFA_GNU_negative_offset_extended 0x2f
+
+/*
+ * Some call frame instructions encode their operands in the opcode. We
+ * need some helper functions to extract both the opcode and operands
+ * from an instruction.
+ */
+static inline unsigned int DW_CFA_opcode(unsigned long insn)
+{
+	return (insn & 0xc0);
+}
+
+static inline unsigned int DW_CFA_operand(unsigned long insn)
+{
+	return (insn & 0x3f);
+}
+
+#define DW_EH_FRAME_CIE	0		/* .eh_frame CIE IDs are 0 */
+#define DW_CIE_ID	0xffffffff
+#define DW64_CIE_ID	0xffffffffffffffffULL
+
+/*
+ * DWARF FDE/CIE length field values.
+ */
+#define DW_EXT_LO	0xfffffff0
+#define DW_EXT_HI	0xffffffff
+#define DW_EXT_DWARF64	DW_EXT_HI
+
+extern struct dwarf_frame *dwarf_unwind_stack(unsigned long,
+					      struct dwarf_frame *);
+extern void dwarf_free_frame(struct dwarf_frame *);
+
+extern int module_dwarf_finalize(const Elf_Ehdr *, const Elf_Shdr *,
+				 struct module *);
+extern void module_dwarf_cleanup(struct module *);
+
+#endif /* !__ASSEMBLY__ */
+
+#define CFI_STARTPROC	.cfi_startproc
+#define CFI_ENDPROC	.cfi_endproc
+#define CFI_DEF_CFA	.cfi_def_cfa
+#define CFI_REGISTER	.cfi_register
+#define CFI_REL_OFFSET	.cfi_rel_offset
+#define CFI_UNDEFINED	.cfi_undefined
+
+#else
+
+/*
+ * Use the asm comment character to ignore the rest of the line.
+ */
+#define CFI_IGNORE	!
+
+#define CFI_STARTPROC	CFI_IGNORE
+#define CFI_ENDPROC	CFI_IGNORE
+#define CFI_DEF_CFA	CFI_IGNORE
+#define CFI_REGISTER	CFI_IGNORE
+#define CFI_REL_OFFSET	CFI_IGNORE
+#define CFI_UNDEFINED	CFI_IGNORE
+
+#ifndef __ASSEMBLY__
+static inline void dwarf_unwinder_init(void)
+{
+}
+
+#define module_dwarf_finalize(hdr, sechdrs, me)	(0)
+#define module_dwarf_cleanup(mod)		do { } while (0)
+
+#endif
+
+#endif /* CONFIG_DWARF_UNWINDER */
+
+#endif /* __ASM_SH_DWARF_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/elf.h b/src/kernel/linux/v4.14/arch/sh/include/asm/elf.h
new file mode 100644
index 0000000..5ec8db1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/elf.h
@@ -0,0 +1,236 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_ELF_H
+#define __ASM_SH_ELF_H
+
+#include <linux/utsname.h>
+#include <asm/auxvec.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/* ELF header e_flags defines */
+#define EF_SH_PIC		0x100	/* -fpic */
+#define EF_SH_FDPIC		0x8000	/* -mfdpic */
+
+/* SH (particularly SHcompact) relocation types  */
+#define	R_SH_NONE		0
+#define	R_SH_DIR32		1
+#define	R_SH_REL32		2
+#define	R_SH_DIR8WPN		3
+#define	R_SH_IND12W		4
+#define	R_SH_DIR8WPL		5
+#define	R_SH_DIR8WPZ		6
+#define	R_SH_DIR8BP		7
+#define	R_SH_DIR8W		8
+#define	R_SH_DIR8L		9
+#define	R_SH_SWITCH16		25
+#define	R_SH_SWITCH32		26
+#define	R_SH_USES		27
+#define	R_SH_COUNT		28
+#define	R_SH_ALIGN		29
+#define	R_SH_CODE		30
+#define	R_SH_DATA		31
+#define	R_SH_LABEL		32
+#define	R_SH_SWITCH8		33
+#define	R_SH_GNU_VTINHERIT	34
+#define	R_SH_GNU_VTENTRY	35
+#define	R_SH_TLS_GD_32		144
+#define	R_SH_TLS_LD_32		145
+#define	R_SH_TLS_LDO_32		146
+#define	R_SH_TLS_IE_32		147
+#define	R_SH_TLS_LE_32		148
+#define	R_SH_TLS_DTPMOD32	149
+#define	R_SH_TLS_DTPOFF32	150
+#define	R_SH_TLS_TPOFF32	151
+#define	R_SH_GOT32		160
+#define	R_SH_PLT32		161
+#define	R_SH_COPY		162
+#define	R_SH_GLOB_DAT		163
+#define	R_SH_JMP_SLOT		164
+#define	R_SH_RELATIVE		165
+#define	R_SH_GOTOFF		166
+#define	R_SH_GOTPC		167
+
+/* FDPIC relocs */
+#define R_SH_GOT20		201
+#define R_SH_GOTOFF20		202
+#define R_SH_GOTFUNCDESC	203
+#define R_SH_GOTFUNCDESC20	204
+#define R_SH_GOTOFFFUNCDESC	205
+#define R_SH_GOTOFFFUNCDESC20	206
+#define R_SH_FUNCDESC		207
+#define R_SH_FUNCDESC_VALUE	208
+
+/* SHmedia relocs */
+#define R_SH_IMM_LOW16		246
+#define R_SH_IMM_LOW16_PCREL	247
+#define R_SH_IMM_MEDLOW16	248
+#define R_SH_IMM_MEDLOW16_PCREL	249
+/* Keep this the last entry.  */
+#define	R_SH_NUM		256
+
+/*
+ * ELF register definitions..
+ */
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fpu_struct elf_fpregset_t;
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#ifdef __LITTLE_ENDIAN__
+#define ELF_DATA	ELFDATA2LSB
+#else
+#define ELF_DATA	ELFDATA2MSB
+#endif
+#define ELF_ARCH	EM_SH
+
+#ifdef __KERNEL__
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)		((x)->e_machine == EM_SH)
+#define elf_check_fdpic(x)		((x)->e_flags & EF_SH_FDPIC)
+#define elf_check_const_displacement(x)	((x)->e_flags & EF_SH_PIC)
+
+/*
+ * Enable dump using regset.
+ * This covers all of general/DSP/FPU regs.
+ */
+#define CORE_DUMP_USE_REGSET
+
+#define ELF_FDPIC_CORE_EFLAGS	EF_SH_FDPIC
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (2 * TASK_SIZE / 3)
+
+#define ELF_CORE_COPY_REGS(_dest,_regs)				\
+	memcpy((char *) &_dest, (char *) _regs,			\
+	       sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(boot_cpu_data.flags)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM	(utsname()->machine)
+
+#ifdef __SH5__
+#define ELF_PLAT_INIT(_r, load_addr) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \
+       _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \
+       _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \
+       _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \
+       _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \
+       _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \
+       _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \
+       _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \
+       _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \
+       _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \
+       _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \
+       _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \
+       _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \
+       _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \
+       _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \
+       _r->sr = SR_FD | SR_MMU; } while (0)
+#else
+#define ELF_PLAT_INIT(_r, load_addr) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
+       _r->sr = SR_FD; } while (0)
+
+#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr,	\
+			    _dynamic_addr)				\
+do {									\
+	_r->regs[0]	= 0;						\
+	_r->regs[1]	= 0;						\
+	_r->regs[2]	= 0;						\
+	_r->regs[3]	= 0;						\
+	_r->regs[4]	= 0;						\
+	_r->regs[5]	= 0;						\
+	_r->regs[6]	= 0;						\
+	_r->regs[7]	= 0;						\
+	_r->regs[8]	= _exec_map_addr;				\
+	_r->regs[9]	= _interp_map_addr;				\
+	_r->regs[10]	= _dynamic_addr;				\
+	_r->regs[11]	= 0;						\
+	_r->regs[12]	= 0;						\
+	_r->regs[13]	= 0;						\
+	_r->regs[14]	= 0;						\
+	_r->sr		= SR_FD;					\
+} while (0)
+#endif
+
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK)))
+
+#ifdef CONFIG_VSYSCALL
+/* vDSO has arch_setup_additional_pages */
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+				       int uses_interp);
+
+extern unsigned int vdso_enabled;
+extern void __kernel_vsyscall;
+
+#define VDSO_BASE		((unsigned long)current->mm->context.vdso)
+#define VDSO_SYM(x)		(VDSO_BASE + (unsigned long)(x))
+
+#define VSYSCALL_AUX_ENT					\
+	if (vdso_enabled)					\
+		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);	\
+	else							\
+		NEW_AUX_ENT(AT_IGNORE, 0)
+#else
+#define VSYSCALL_AUX_ENT	NEW_AUX_ENT(AT_IGNORE, 0)
+#endif /* CONFIG_VSYSCALL */
+
+#ifdef CONFIG_SH_FPU
+#define FPU_AUX_ENT	NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT)
+#else
+#define FPU_AUX_ENT	NEW_AUX_ENT(AT_IGNORE, 0)
+#endif
+
+extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
+
+/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
+#define ARCH_DLINFO						\
+do {								\
+	/* Optional FPU initialization */			\
+	FPU_AUX_ENT;						\
+								\
+	/* Optional vsyscall entry */				\
+	VSYSCALL_AUX_ENT;					\
+								\
+	/* Cache desc */					\
+	NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape);	\
+	NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape);	\
+	NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape);		\
+} while (0)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_ELF_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/entry-macros.S b/src/kernel/linux/v4.14/arch/sh/include/asm/entry-macros.S
new file mode 100644
index 0000000..5ce142d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/entry-macros.S
@@ -0,0 +1,123 @@
+! SPDX-License-Identifier: GPL-2.0
+! entry.S macro define
+	
+	.macro	cli
+	stc	sr, r0
+	or	#0xf0, r0
+	ldc	r0, sr
+	.endm
+
+	.macro	sti
+	mov	#0xfffffff0, r11
+	extu.b	r11, r11
+	not	r11, r11
+	stc	sr, r10
+	and	r11, r10
+#ifdef CONFIG_CPU_HAS_SR_RB
+	stc	k_g_imask, r11
+	or	r11, r10
+#endif
+	ldc	r10, sr
+	.endm
+
+	.macro	get_current_thread_info, ti, tmp
+#ifdef CONFIG_CPU_HAS_SR_RB
+	stc	r7_bank, \ti
+#else
+	mov	#((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp
+	shll8	\tmp
+	shll2	\tmp
+	mov	r15, \ti
+	and	\tmp, \ti
+#endif	
+	.endm
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+
+	.macro	TRACE_IRQS_ON
+	mov.l	r0, @-r15
+	mov.l	r1, @-r15
+	mov.l	r2, @-r15
+	mov.l	r3, @-r15
+	mov.l	r4, @-r15
+	mov.l	r5, @-r15
+	mov.l	r6, @-r15
+	mov.l	r7, @-r15
+
+	mov.l   7834f, r0
+	jsr	@r0
+	 nop
+
+	mov.l	@r15+, r7
+	mov.l	@r15+, r6
+	mov.l	@r15+, r5
+	mov.l	@r15+, r4
+	mov.l	@r15+, r3
+	mov.l	@r15+, r2
+	mov.l	@r15+, r1
+	mov.l	@r15+, r0
+	mov.l	7834f, r0
+
+	bra	7835f
+	 nop
+	.balign	4
+7834:	.long	trace_hardirqs_on
+7835:
+	.endm
+	.macro	TRACE_IRQS_OFF
+
+	mov.l	r0, @-r15
+	mov.l	r1, @-r15
+	mov.l	r2, @-r15
+	mov.l	r3, @-r15
+	mov.l	r4, @-r15
+	mov.l	r5, @-r15
+	mov.l	r6, @-r15
+	mov.l	r7, @-r15
+
+	mov.l	7834f, r0
+	jsr	@r0
+	 nop
+
+	mov.l	@r15+, r7
+	mov.l	@r15+, r6
+	mov.l	@r15+, r5
+	mov.l	@r15+, r4
+	mov.l	@r15+, r3
+	mov.l	@r15+, r2
+	mov.l	@r15+, r1
+	mov.l	@r15+, r0
+	mov.l	7834f, r0
+
+	bra	7835f
+	 nop
+	.balign	4
+7834:	.long	trace_hardirqs_off
+7835:
+	.endm
+
+#else
+	.macro	TRACE_IRQS_ON
+	.endm
+
+	.macro	TRACE_IRQS_OFF
+	.endm
+#endif
+
+#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
+# define PREF(x)	pref	@x
+#else
+# define PREF(x)	nop
+#endif
+
+	/*
+	 * Macro for use within assembly. Because the DWARF unwinder
+	 * needs to use the frame register to unwind the stack, we
+	 * need to setup r14 with the value of the stack pointer as
+	 * the return address is usually on the stack somewhere.
+	 */
+	.macro	setup_frame_reg
+#ifdef CONFIG_DWARF_UNWINDER
+	mov	r15, r14
+#endif
+	.endm
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/extable.h b/src/kernel/linux/v4.14/arch/sh/include/asm/extable.h
new file mode 100644
index 0000000..ed46f8b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/extable.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_EXTABLE_H
+#define __ASM_SH_EXTABLE_H
+
+#include <asm-generic/extable.h>
+
+#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU)
+#define ARCH_HAS_SEARCH_EXTABLE
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/fb.h b/src/kernel/linux/v4.14/arch/sh/include/asm/fb.h
new file mode 100644
index 0000000..d92e99c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/fb.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/fixmap.h b/src/kernel/linux/v4.14/arch/sh/include/asm/fixmap.h
new file mode 100644
index 0000000..4daf91c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/fixmap.h
@@ -0,0 +1,101 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <linux/kernel.h>
+#include <linux/threads.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special  addresses
+ * from the end of P3 backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanizm,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+	/*
+	 * The FIX_CMAP entries are used by kmap_coherent() to get virtual
+	 * addresses which are of a known color, and so their values are
+	 * important. __fix_to_virt(FIX_CMAP_END - n) must give an address
+	 * which is the same color as a page (n<<PAGE_SHIFT).
+	 */
+#define FIX_N_COLOURS 8
+	FIX_CMAP_BEGIN,
+	FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS) - 1,
+
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN + (KM_TYPE_NR * NR_CPUS) - 1,
+#endif
+
+#ifdef CONFIG_IOREMAP_FIXED
+	/*
+	 * FIX_IOREMAP entries are useful for mapping physical address
+	 * space before ioremap() is useable, e.g. really early in boot
+	 * before kmalloc() is working.
+	 */
+#define FIX_N_IOREMAPS	32
+	FIX_IOREMAP_BEGIN,
+	FIX_IOREMAP_END = FIX_IOREMAP_BEGIN + FIX_N_IOREMAPS - 1,
+#endif
+
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap(enum fixed_addresses idx,
+			 unsigned long phys, pgprot_t flags);
+extern void __clear_fixmap(enum fixed_addresses idx, pgprot_t flags);
+
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap, and leave one page empty
+ * at the top of mem..
+ */
+#ifdef CONFIG_SUPERH32
+#define FIXADDR_TOP	(P4SEG - PAGE_SIZE)
+#else
+#define FIXADDR_TOP	((unsigned long)(-PAGE_SIZE))
+#endif
+#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define FIXMAP_PAGE_NOCACHE PAGE_KERNEL_NOCACHE
+
+#include <asm-generic/fixmap.h>
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/flat.h b/src/kernel/linux/v4.14/arch/sh/include/asm/flat.h
new file mode 100644
index 0000000..275fcae
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/flat.h
@@ -0,0 +1,41 @@
+/*
+ * include/asm-sh/flat.h
+ *
+ * uClinux flat-format executables
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive for
+ * more details.
+ */
+#ifndef __ASM_SH_FLAT_H
+#define __ASM_SH_FLAT_H
+
+#include <asm/unaligned.h>
+
+#define	flat_argvp_envp_on_stack()		0
+#define	flat_old_ram_flag(flags)		(flags)
+#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
+static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
+					u32 *addr, u32 *persistent)
+{
+	*addr = get_unaligned((__force u32 *)rp);
+	return 0;
+}
+static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
+{
+	put_unaligned(addr, (__force u32 *)rp);
+	return 0;
+}
+#define	flat_get_relocate_addr(rel)		(rel)
+#define	flat_set_persistent(relval, p)		({ (void)p; 0; })
+
+#define FLAT_PLAT_INIT(_r) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
+       _r->sr = SR_FD; } while (0)
+
+#endif /* __ASM_SH_FLAT_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/fpu.h b/src/kernel/linux/v4.14/arch/sh/include/asm/fpu.h
new file mode 100644
index 0000000..43cfaf9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/fpu.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_FPU_H
+#define __ASM_SH_FPU_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+
+struct task_struct;
+
+#ifdef CONFIG_SH_FPU
+static inline void release_fpu(struct pt_regs *regs)
+{
+	regs->sr |= SR_FD;
+}
+
+static inline void grab_fpu(struct pt_regs *regs)
+{
+	regs->sr &= ~SR_FD;
+}
+
+extern void save_fpu(struct task_struct *__tsk);
+extern void restore_fpu(struct task_struct *__tsk);
+extern void fpu_state_restore(struct pt_regs *regs);
+extern void __fpu_state_restore(void);
+#else
+#define save_fpu(tsk)			do { } while (0)
+#define restore_fpu(tsk)		do { } while (0)
+#define release_fpu(regs)		do { } while (0)
+#define grab_fpu(regs)			do { } while (0)
+#define fpu_state_restore(regs)		do { } while (0)
+#define __fpu_state_restore(regs)	do { } while (0)
+#endif
+
+struct user_regset;
+
+extern int do_fpu_inst(unsigned short, struct pt_regs *);
+extern int init_fpu(struct task_struct *);
+
+extern int fpregs_get(struct task_struct *target,
+		      const struct user_regset *regset,
+		      unsigned int pos, unsigned int count,
+		      void *kbuf, void __user *ubuf);
+
+static inline void __unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+		task_thread_info(tsk)->status &= ~TS_USEDFPU;
+		save_fpu(tsk);
+		release_fpu(regs);
+	} else
+		tsk->thread.fpu_counter = 0;
+}
+
+static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+	preempt_disable();
+	__unlazy_fpu(tsk, regs);
+	preempt_enable();
+}
+
+static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+	preempt_disable();
+	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+		task_thread_info(tsk)->status &= ~TS_USEDFPU;
+		release_fpu(regs);
+	}
+	preempt_enable();
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_SH_FPU_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/freq.h b/src/kernel/linux/v4.14/arch/sh/include/asm/freq.h
new file mode 100644
index 0000000..4ece90b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/freq.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-sh/freq.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __ASM_SH_FREQ_H
+#define __ASM_SH_FREQ_H
+#ifdef __KERNEL__
+
+#include <cpu/freq.h>
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_FREQ_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/ftrace.h b/src/kernel/linux/v4.14/arch/sh/include/asm/ftrace.h
new file mode 100644
index 0000000..b1c1dc0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/ftrace.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_FTRACE_H
+#define __ASM_SH_FTRACE_H
+
+#ifdef CONFIG_FUNCTION_TRACER
+
+#define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
+#define FTRACE_SYSCALL_MAX	NR_syscalls
+
+#ifndef __ASSEMBLY__
+extern void mcount(void);
+
+#define MCOUNT_ADDR		((unsigned long)(mcount))
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+#define CALL_ADDR		((long)(ftrace_call))
+#define STUB_ADDR		((long)(ftrace_stub))
+#define GRAPH_ADDR		((long)(ftrace_graph_call))
+#define CALLER_ADDR		((long)(ftrace_caller))
+
+#define MCOUNT_INSN_OFFSET	((STUB_ADDR - CALL_ADDR) - 4)
+#define GRAPH_INSN_OFFSET	((CALLER_ADDR - GRAPH_ADDR) - 4)
+
+struct dyn_arch_ftrace {
+	/* No extra data needed on sh */
+};
+
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	/* 'addr' is the memory table address. */
+	return addr;
+}
+
+#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_FUNCTION_TRACER */
+
+#ifndef __ASSEMBLY__
+
+/* arch/sh/kernel/return_address.c */
+extern void *return_address(unsigned int);
+
+#define ftrace_return_address(n) return_address(n)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_SH_FTRACE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/futex-cas.h b/src/kernel/linux/v4.14/arch/sh/include/asm/futex-cas.h
new file mode 100644
index 0000000..ed738e3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/futex-cas.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_FUTEX_CAS_H
+#define __ASM_SH_FUTEX_CAS_H
+
+static inline int atomic_futex_op_cmpxchg_inatomic(u32 *uval,
+						   u32 __user *uaddr,
+						   u32 oldval, u32 newval)
+{
+	int err = 0;
+	__asm__ __volatile__(
+		"1:\n\t"
+		"cas.l	%2, %1, @r0\n"
+		"2:\n\t"
+#ifdef CONFIG_MMU
+		".section	.fixup,\"ax\"\n"
+		"3:\n\t"
+		"mov.l	4f, %0\n\t"
+		"jmp	@%0\n\t"
+		" mov	%3, %0\n\t"
+		".balign	4\n"
+		"4:	.long	2b\n\t"
+		".previous\n"
+		".section	__ex_table,\"a\"\n\t"
+		".long	1b, 3b\n\t"
+		".previous"
+#endif
+		:"+r" (err), "+r" (newval)
+		:"r" (oldval), "i" (-EFAULT), "z" (uaddr)
+		:"t", "memory");
+	if (err) return err;
+	*uval = newval;
+	return 0;
+}
+
+#endif /* __ASM_SH_FUTEX_CAS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/futex-irq.h b/src/kernel/linux/v4.14/arch/sh/include/asm/futex-irq.h
new file mode 100644
index 0000000..9bc0532
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/futex-irq.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_FUTEX_IRQ_H
+#define __ASM_SH_FUTEX_IRQ_H
+
+static inline int atomic_futex_op_cmpxchg_inatomic(u32 *uval,
+						   u32 __user *uaddr,
+						   u32 oldval, u32 newval)
+{
+	unsigned long flags;
+	int ret;
+	u32 prev = 0;
+
+	local_irq_save(flags);
+
+	ret = get_user(prev, uaddr);
+	if (!ret && oldval == prev)
+		ret = put_user(newval, uaddr);
+
+	local_irq_restore(flags);
+
+	*uval = prev;
+	return ret;
+}
+
+#endif /* __ASM_SH_FUTEX_IRQ_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/futex-llsc.h b/src/kernel/linux/v4.14/arch/sh/include/asm/futex-llsc.h
new file mode 100644
index 0000000..6e15707
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/futex-llsc.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_FUTEX_LLSC_H
+#define __ASM_SH_FUTEX_LLSC_H
+
+static inline int atomic_futex_op_cmpxchg_inatomic(u32 *uval,
+						   u32 __user *uaddr,
+						   u32 oldval, u32 newval)
+{
+	int err = 0;
+	__asm__ __volatile__(
+		"synco\n"
+		"1:\n\t"
+		"movli.l	@%2, r0\n\t"
+		"mov	r0, %1\n\t"
+		"cmp/eq	%1, %4\n\t"
+		"bf	2f\n\t"
+		"mov	%5, r0\n\t"
+		"movco.l	r0, @%2\n\t"
+		"bf	1b\n"
+		"2:\n\t"
+		"synco\n\t"
+#ifdef CONFIG_MMU
+		".section	.fixup,\"ax\"\n"
+		"3:\n\t"
+		"mov.l	4f, %0\n\t"
+		"jmp	@%0\n\t"
+		" mov	%3, %0\n\t"
+		".balign	4\n"
+		"4:	.long	2b\n\t"
+		".previous\n"
+		".section	__ex_table,\"a\"\n\t"
+		".long	1b, 3b\n\t"
+		".previous"
+#endif
+		:"+r" (err), "=&r" (*uval)
+		:"r" (uaddr), "i" (-EFAULT), "r" (oldval), "r" (newval)
+		:"t", "memory", "r0");
+	if (err) return err;
+	return 0;
+}
+
+#endif /* __ASM_SH_FUTEX_LLSC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/futex.h b/src/kernel/linux/v4.14/arch/sh/include/asm/futex.h
new file mode 100644
index 0000000..15bf07b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/futex.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_FUTEX_H
+#define __ASM_SH_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+#if !defined(CONFIG_SMP)
+#include <asm/futex-irq.h>
+#elif defined(CONFIG_CPU_J2)
+#include <asm/futex-cas.h>
+#elif defined(CONFIG_CPU_SH4A)
+#include <asm/futex-llsc.h>
+#else
+#error SMP not supported on this configuration.
+#endif
+
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
+			      u32 oldval, u32 newval)
+{
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
+		return -EFAULT;
+
+	return atomic_futex_op_cmpxchg_inatomic(uval, uaddr, oldval, newval);
+}
+
+static inline int arch_futex_atomic_op_inuser(int op, u32 oparg, int *oval,
+		u32 __user *uaddr)
+{
+	u32 oldval, newval, prev;
+	int ret;
+
+	pagefault_disable();
+
+	do {
+		if (op == FUTEX_OP_SET)
+			ret = oldval = 0;
+		else
+			ret = get_user(oldval, uaddr);
+
+		if (ret) break;
+
+		switch (op) {
+		case FUTEX_OP_SET:
+			newval = oparg;
+			break;
+		case FUTEX_OP_ADD:
+			newval = oldval + oparg;
+			break;
+		case FUTEX_OP_OR:
+			newval = oldval | oparg;
+			break;
+		case FUTEX_OP_ANDN:
+			newval = oldval & ~oparg;
+			break;
+		case FUTEX_OP_XOR:
+			newval = oldval ^ oparg;
+			break;
+		default:
+			ret = -ENOSYS;
+			break;
+		}
+
+		if (ret) break;
+
+		ret = futex_atomic_cmpxchg_inatomic(&prev, uaddr, oldval, newval);
+	} while (!ret && prev != oldval);
+
+	pagefault_enable();
+
+	if (!ret)
+		*oval = oldval;
+
+	return ret;
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_FUTEX_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/gpio.h b/src/kernel/linux/v4.14/arch/sh/include/asm/gpio.h
new file mode 100644
index 0000000..7dfe15e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/gpio.h
@@ -0,0 +1,54 @@
+/*
+ *  include/asm-sh/gpio.h
+ *
+ * Generic GPIO API and pinmux table support for SuperH.
+ *
+ * Copyright (c) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_GPIO_H
+#define __ASM_SH_GPIO_H
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+
+#if defined(CONFIG_CPU_SH3)
+#include <cpu/gpio.h>
+#endif
+
+#define ARCH_NR_GPIOS 512
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return __gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -ENOSYS;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* __ASM_SH_GPIO_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/hardirq.h b/src/kernel/linux/v4.14/arch/sh/include/asm/hardirq.h
new file mode 100644
index 0000000..edaea35
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/hardirq.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_HARDIRQ_H
+#define __ASM_SH_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+	unsigned int __nmi_count;		/* arch dependent */
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(unsigned int irq);
+
+#endif /* __ASM_SH_HARDIRQ_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/hd64461.h b/src/kernel/linux/v4.14/arch/sh/include/asm/hd64461.h
new file mode 100644
index 0000000..afb24cb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/hd64461.h
@@ -0,0 +1,252 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_HD64461
+#define __ASM_SH_HD64461
+/*
+ *	Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ *	Copyright (C) 2004 Paul Mundt
+ *	Copyright (C) 2000 YAEGASHI Takeshi
+ *
+ *		Hitachi HD64461 companion chip support
+ *	(please note manual reference 0x10000000 = 0xb0000000)
+ */
+
+/* Constants for PCMCIA mappings */
+#define	HD64461_PCC_WINDOW	0x01000000
+
+/* Area 6 - Slot 0 - memory and/or IO card */
+#define HD64461_IOBASE		0xb0000000
+#define HD64461_IO_OFFSET(x)	(HD64461_IOBASE + (x))
+#define	HD64461_PCC0_BASE	HD64461_IO_OFFSET(0x8000000)
+#define	HD64461_PCC0_ATTR	(HD64461_PCC0_BASE)				/* 0xb80000000 */
+#define	HD64461_PCC0_COMM	(HD64461_PCC0_BASE+HD64461_PCC_WINDOW)		/* 0xb90000000 */
+#define	HD64461_PCC0_IO		(HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW)	/* 0xba0000000 */
+
+/* Area 5 - Slot 1 - memory card only */
+#define	HD64461_PCC1_BASE	HD64461_IO_OFFSET(0x4000000)
+#define	HD64461_PCC1_ATTR	(HD64461_PCC1_BASE)				/* 0xb4000000 */
+#define	HD64461_PCC1_COMM	(HD64461_PCC1_BASE+HD64461_PCC_WINDOW)		/* 0xb5000000 */
+
+/* Standby Control Register for HD64461 */
+#define	HD64461_STBCR			HD64461_IO_OFFSET(0x00000000)
+#define	HD64461_STBCR_CKIO_STBY		0x2000
+#define	HD64461_STBCR_SAFECKE_IST	0x1000
+#define	HD64461_STBCR_SLCKE_IST		0x0800
+#define	HD64461_STBCR_SAFECKE_OST	0x0400
+#define	HD64461_STBCR_SLCKE_OST		0x0200
+#define	HD64461_STBCR_SMIAST		0x0100
+#define	HD64461_STBCR_SLCDST		0x0080
+#define	HD64461_STBCR_SPC0ST		0x0040
+#define	HD64461_STBCR_SPC1ST		0x0020
+#define	HD64461_STBCR_SAFEST		0x0010
+#define	HD64461_STBCR_STM0ST		0x0008
+#define	HD64461_STBCR_STM1ST		0x0004
+#define	HD64461_STBCR_SIRST		0x0002
+#define	HD64461_STBCR_SURTST		0x0001
+
+/* System Configuration Register */
+#define	HD64461_SYSCR		HD64461_IO_OFFSET(0x02)
+
+/* CPU Data Bus Control Register */
+#define	HD64461_SCPUCR		HD64461_IO_OFFSET(0x04)
+
+/* Base Address Register */
+#define	HD64461_LCDCBAR		HD64461_IO_OFFSET(0x1000)
+
+/* Line increment address */
+#define	HD64461_LCDCLOR		HD64461_IO_OFFSET(0x1002)
+
+/* Controls LCD controller */
+#define	HD64461_LCDCCR		HD64461_IO_OFFSET(0x1004)
+
+/* LCCDR control bits */
+#define	HD64461_LCDCCR_STBACK	0x0400	/* Standby Back */
+#define	HD64461_LCDCCR_STREQ	0x0100	/* Standby Request */
+#define	HD64461_LCDCCR_MOFF	0x0080	/* Memory Off */
+#define	HD64461_LCDCCR_REFSEL	0x0040	/* Refresh Select */
+#define	HD64461_LCDCCR_EPON	0x0020	/* End Power On */
+#define	HD64461_LCDCCR_SPON	0x0010	/* Start Power On */
+
+/* Controls LCD (1) */
+#define	HD64461_LDR1		HD64461_IO_OFFSET(0x1010)
+#define	HD64461_LDR1_DON	0x01	/* Display On */
+#define	HD64461_LDR1_DINV	0x80	/* Display Invert */
+
+/* Controls LCD (2) */
+#define	HD64461_LDR2		HD64461_IO_OFFSET(0x1012)
+#define	HD64461_LDHNCR		HD64461_IO_OFFSET(0x1014)	/* Number of horizontal characters */
+#define	HD64461_LDHNSR		HD64461_IO_OFFSET(0x1016)	/* Specify output start position + width of CL1 */
+#define	HD64461_LDVNTR		HD64461_IO_OFFSET(0x1018)	/* Specify total vertical lines */
+#define	HD64461_LDVNDR		HD64461_IO_OFFSET(0x101a)	/* specify number of display vertical lines */
+#define	HD64461_LDVSPR		HD64461_IO_OFFSET(0x101c)	/* specify vertical synchronization pos and AC nr */
+
+/* Controls LCD (3) */
+#define	HD64461_LDR3		HD64461_IO_OFFSET(0x101e)
+
+/* Palette Registers */
+#define	HD64461_CPTWAR		HD64461_IO_OFFSET(0x1030)	/* Color Palette Write Address Register */
+#define	HD64461_CPTWDR		HD64461_IO_OFFSET(0x1032)	/* Color Palette Write Data Register */
+#define	HD64461_CPTRAR		HD64461_IO_OFFSET(0x1034)	/* Color Palette Read Address Register */
+#define	HD64461_CPTRDR		HD64461_IO_OFFSET(0x1036)	/* Color Palette Read Data Register */
+
+#define	HD64461_GRDOR		HD64461_IO_OFFSET(0x1040)	/* Display Resolution Offset Register */
+#define	HD64461_GRSCR		HD64461_IO_OFFSET(0x1042)	/* Solid Color Register */
+#define	HD64461_GRCFGR		HD64461_IO_OFFSET(0x1044)	/* Accelerator Configuration Register */
+
+#define	HD64461_GRCFGR_ACCSTATUS	0x10	/* Accelerator Status */
+#define	HD64461_GRCFGR_ACCRESET		0x08	/* Accelerator Reset */
+#define	HD64461_GRCFGR_ACCSTART_BITBLT	0x06	/* Accelerator Start BITBLT */
+#define	HD64461_GRCFGR_ACCSTART_LINE	0x04	/* Accelerator Start Line Drawing */
+#define	HD64461_GRCFGR_COLORDEPTH16	0x01	/* Sets Colordepth 16 for Accelerator */
+#define	HD64461_GRCFGR_COLORDEPTH8	0x01	/* Sets Colordepth 8 for Accelerator */
+
+/* Line Drawing Registers */
+#define	HD64461_LNSARH		HD64461_IO_OFFSET(0x1046)	/* Line Start Address Register (H) */
+#define	HD64461_LNSARL		HD64461_IO_OFFSET(0x1048)	/* Line Start Address Register (L) */
+#define	HD64461_LNAXLR		HD64461_IO_OFFSET(0x104a)	/* Axis Pixel Length Register */
+#define	HD64461_LNDGR		HD64461_IO_OFFSET(0x104c)	/* Diagonal Register */
+#define	HD64461_LNAXR		HD64461_IO_OFFSET(0x104e)	/* Axial Register */
+#define	HD64461_LNERTR		HD64461_IO_OFFSET(0x1050)	/* Start Error Term Register */
+#define	HD64461_LNMDR		HD64461_IO_OFFSET(0x1052)	/* Line Mode Register */
+
+/* BitBLT Registers */
+#define	HD64461_BBTSSARH	HD64461_IO_OFFSET(0x1054)	/* Source Start Address Register (H) */
+#define	HD64461_BBTSSARL	HD64461_IO_OFFSET(0x1056)	/* Source Start Address Register (L) */
+#define	HD64461_BBTDSARH	HD64461_IO_OFFSET(0x1058)	/* Destination Start Address Register (H) */
+#define	HD64461_BBTDSARL	HD64461_IO_OFFSET(0x105a)	/* Destination Start Address Register (L) */
+#define	HD64461_BBTDWR		HD64461_IO_OFFSET(0x105c)	/* Destination Block Width Register */
+#define	HD64461_BBTDHR		HD64461_IO_OFFSET(0x105e)	/* Destination Block Height Register */
+#define	HD64461_BBTPARH		HD64461_IO_OFFSET(0x1060)	/* Pattern Start Address Register (H) */
+#define	HD64461_BBTPARL		HD64461_IO_OFFSET(0x1062)	/* Pattern Start Address Register (L) */
+#define	HD64461_BBTMARH		HD64461_IO_OFFSET(0x1064)	/* Mask Start Address Register (H) */
+#define	HD64461_BBTMARL		HD64461_IO_OFFSET(0x1066)	/* Mask Start Address Register (L) */
+#define	HD64461_BBTROPR		HD64461_IO_OFFSET(0x1068)	/* ROP Register */
+#define	HD64461_BBTMDR		HD64461_IO_OFFSET(0x106a)	/* BitBLT Mode Register */
+
+/* PC Card Controller Registers */
+/* Maps to Physical Area 6 */
+#define	HD64461_PCC0ISR		HD64461_IO_OFFSET(0x2000)	/* socket 0 interface status */
+#define	HD64461_PCC0GCR		HD64461_IO_OFFSET(0x2002)	/* socket 0 general control */
+#define	HD64461_PCC0CSCR	HD64461_IO_OFFSET(0x2004)	/* socket 0 card status change */
+#define	HD64461_PCC0CSCIER	HD64461_IO_OFFSET(0x2006)	/* socket 0 card status change interrupt enable */
+#define	HD64461_PCC0SCR		HD64461_IO_OFFSET(0x2008)	/* socket 0 software control */
+/* Maps to Physical Area 5 */
+#define	HD64461_PCC1ISR		HD64461_IO_OFFSET(0x2010)	/* socket 1 interface status */
+#define	HD64461_PCC1GCR		HD64461_IO_OFFSET(0x2012)	/* socket 1 general control */
+#define	HD64461_PCC1CSCR	HD64461_IO_OFFSET(0x2014)	/* socket 1 card status change */
+#define	HD64461_PCC1CSCIER	HD64461_IO_OFFSET(0x2016)	/* socket 1 card status change interrupt enable */
+#define	HD64461_PCC1SCR		HD64461_IO_OFFSET(0x2018)	/* socket 1 software control */
+
+/* PCC Interface Status Register */
+#define	HD64461_PCCISR_READY		0x80	/* card ready */
+#define	HD64461_PCCISR_MWP		0x40	/* card write-protected */
+#define	HD64461_PCCISR_VS2		0x20	/* voltage select pin 2 */
+#define	HD64461_PCCISR_VS1		0x10	/* voltage select pin 1 */
+#define	HD64461_PCCISR_CD2		0x08	/* card detect 2 */
+#define	HD64461_PCCISR_CD1		0x04	/* card detect 1 */
+#define	HD64461_PCCISR_BVD2		0x02	/* battery 1 */
+#define	HD64461_PCCISR_BVD1		0x01	/* battery 1 */
+
+#define	HD64461_PCCISR_PCD_MASK		0x0c	/* card detect */
+#define	HD64461_PCCISR_BVD_MASK		0x03	/* battery voltage */
+#define	HD64461_PCCISR_BVD_BATGOOD	0x03	/* battery good */
+#define	HD64461_PCCISR_BVD_BATWARN	0x01	/* battery low warning */
+#define	HD64461_PCCISR_BVD_BATDEAD1	0x02	/* battery dead */
+#define	HD64461_PCCISR_BVD_BATDEAD2	0x00	/* battery dead */
+
+/* PCC General Control Register */
+#define	HD64461_PCCGCR_DRVE		0x80	/* output drive */
+#define	HD64461_PCCGCR_PCCR		0x40	/* PC card reset */
+#define	HD64461_PCCGCR_PCCT		0x20	/* PC card type, 1=IO&mem, 0=mem */
+#define	HD64461_PCCGCR_VCC0		0x10	/* voltage control pin VCC0SEL0 */
+#define	HD64461_PCCGCR_PMMOD		0x08	/* memory mode */
+#define	HD64461_PCCGCR_PA25		0x04	/* pin A25 */
+#define	HD64461_PCCGCR_PA24		0x02	/* pin A24 */
+#define	HD64461_PCCGCR_REG		0x01	/* pin PCC0REG# */
+
+/* PCC Card Status Change Register */
+#define	HD64461_PCCCSCR_SCDI		0x80	/* sw card detect intr */
+#define	HD64461_PCCCSCR_SRV1		0x40	/* reserved */
+#define	HD64461_PCCCSCR_IREQ		0x20	/* IREQ intr req */
+#define	HD64461_PCCCSCR_SC		0x10	/* STSCHG (status change) pin */
+#define	HD64461_PCCCSCR_CDC		0x08	/* CD (card detect) change */
+#define	HD64461_PCCCSCR_RC		0x04	/* READY change */
+#define	HD64461_PCCCSCR_BW		0x02	/* battery warning change */
+#define	HD64461_PCCCSCR_BD		0x01	/* battery dead change */
+
+/* PCC Card Status Change Interrupt Enable Register */
+#define	HD64461_PCCCSCIER_CRE		0x80	/* change reset enable */
+#define	HD64461_PCCCSCIER_IREQE_MASK	0x60	/* IREQ enable */
+#define	HD64461_PCCCSCIER_IREQE_DISABLED 0x00	/* IREQ disabled */
+#define	HD64461_PCCCSCIER_IREQE_LEVEL	0x20	/* IREQ level-triggered */
+#define	HD64461_PCCCSCIER_IREQE_FALLING	0x40	/* IREQ falling-edge-trig */
+#define	HD64461_PCCCSCIER_IREQE_RISING	0x60	/* IREQ rising-edge-trig */
+
+#define	HD64461_PCCCSCIER_SCE		0x10	/* status change enable */
+#define	HD64461_PCCCSCIER_CDE		0x08	/* card detect change enable */
+#define	HD64461_PCCCSCIER_RE		0x04	/* ready change enable */
+#define	HD64461_PCCCSCIER_BWE		0x02	/* battery warn change enable */
+#define	HD64461_PCCCSCIER_BDE		0x01	/* battery dead change enable*/
+
+/* PCC Software Control Register */
+#define	HD64461_PCCSCR_VCC1		0x02	/* voltage control pin 1 */
+#define	HD64461_PCCSCR_SWP		0x01	/* write protect */
+
+/* PCC0 Output Pins Control Register */
+#define	HD64461_P0OCR		HD64461_IO_OFFSET(0x202a)
+
+/* PCC1 Output Pins Control Register */
+#define	HD64461_P1OCR		HD64461_IO_OFFSET(0x202c)
+
+/* PC Card General Control Register */
+#define	HD64461_PGCR		HD64461_IO_OFFSET(0x202e)
+
+/* Port Control Registers */
+#define	HD64461_GPACR		HD64461_IO_OFFSET(0x4000)	/* Port A - Handles IRDA/TIMER */
+#define	HD64461_GPBCR		HD64461_IO_OFFSET(0x4002)	/* Port B - Handles UART */
+#define	HD64461_GPCCR		HD64461_IO_OFFSET(0x4004)	/* Port C - Handles PCMCIA 1 */
+#define	HD64461_GPDCR		HD64461_IO_OFFSET(0x4006)	/* Port D - Handles PCMCIA 1 */
+
+/* Port Control Data Registers */
+#define	HD64461_GPADR		HD64461_IO_OFFSET(0x4010)	/* A */
+#define	HD64461_GPBDR		HD64461_IO_OFFSET(0x4012)	/* B */
+#define	HD64461_GPCDR		HD64461_IO_OFFSET(0x4014)	/* C */
+#define	HD64461_GPDDR		HD64461_IO_OFFSET(0x4016)	/* D */
+
+/* Interrupt Control Registers */
+#define	HD64461_GPAICR		HD64461_IO_OFFSET(0x4020)	/* A */
+#define	HD64461_GPBICR		HD64461_IO_OFFSET(0x4022)	/* B */
+#define	HD64461_GPCICR		HD64461_IO_OFFSET(0x4024)	/* C */
+#define	HD64461_GPDICR		HD64461_IO_OFFSET(0x4026)	/* D */
+
+/* Interrupt Status Registers */
+#define	HD64461_GPAISR		HD64461_IO_OFFSET(0x4040)	/* A */
+#define	HD64461_GPBISR		HD64461_IO_OFFSET(0x4042)	/* B */
+#define	HD64461_GPCISR		HD64461_IO_OFFSET(0x4044)	/* C */
+#define	HD64461_GPDISR		HD64461_IO_OFFSET(0x4046)	/* D */
+
+/* Interrupt Request Register & Interrupt Mask Register */
+#define	HD64461_NIRR		HD64461_IO_OFFSET(0x5000)
+#define	HD64461_NIMR		HD64461_IO_OFFSET(0x5002)
+
+#define	HD64461_IRQBASE		OFFCHIP_IRQ_BASE
+#define	OFFCHIP_IRQ_BASE	64
+#define	HD64461_IRQ_NUM		16
+
+#define	HD64461_IRQ_UART	(HD64461_IRQBASE+5)
+#define	HD64461_IRQ_IRDA	(HD64461_IRQBASE+6)
+#define	HD64461_IRQ_TMU1	(HD64461_IRQBASE+9)
+#define	HD64461_IRQ_TMU0	(HD64461_IRQBASE+10)
+#define	HD64461_IRQ_GPIO	(HD64461_IRQBASE+11)
+#define	HD64461_IRQ_AFE		(HD64461_IRQBASE+12)
+#define	HD64461_IRQ_PCC1	(HD64461_IRQBASE+13)
+#define	HD64461_IRQ_PCC0	(HD64461_IRQBASE+14)
+
+#define __IO_PREFIX	hd64461
+#include <asm/io_generic.h>
+
+/* arch/sh/cchips/hd6446x/hd64461/setup.c */
+void hd64461_register_irq_demux(int irq,
+				int (*demux) (int irq, void *dev), void *dev);
+void hd64461_unregister_irq_demux(int irq);
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/heartbeat.h b/src/kernel/linux/v4.14/arch/sh/include/asm/heartbeat.h
new file mode 100644
index 0000000..4028ca4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/heartbeat.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_HEARTBEAT_H
+#define __ASM_SH_HEARTBEAT_H
+
+#include <linux/timer.h>
+
+#define HEARTBEAT_INVERTED	(1 << 0)
+
+struct heartbeat_data {
+	void __iomem *base;
+	unsigned char *bit_pos;
+	unsigned int nr_bits;
+	struct timer_list timer;
+	unsigned int regsize;
+	unsigned int mask;
+	unsigned long flags;
+};
+
+#endif /* __ASM_SH_HEARTBEAT_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/hugetlb.h b/src/kernel/linux/v4.14/arch/sh/include/asm/hugetlb.h
new file mode 100644
index 0000000..735939c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/hugetlb.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_SH_HUGETLB_H
+#define _ASM_SH_HUGETLB_H
+
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+#include <asm-generic/hugetlb.h>
+
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+					 unsigned long addr,
+					 unsigned long len) {
+	return 0;
+}
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
+{
+	if (len & ~HPAGE_MASK)
+		return -EINVAL;
+	if (addr & ~HPAGE_MASK)
+		return -EINVAL;
+	return 0;
+}
+
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
+					  unsigned long addr, unsigned long end,
+					  unsigned long floor,
+					  unsigned long ceiling)
+{
+	free_pgd_range(tlb, addr, end, floor, ceiling);
+}
+
+static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+				   pte_t *ptep, pte_t pte)
+{
+	set_pte_at(mm, addr, ptep, pte);
+}
+
+static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+					    unsigned long addr, pte_t *ptep)
+{
+	return ptep_get_and_clear(mm, addr, ptep);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	return pte_wrprotect(pte);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty)
+{
+	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline void arch_clear_hugepage_flags(struct page *page)
+{
+	clear_bit(PG_dcache_clean, &page->flags);
+}
+
+#endif /* _ASM_SH_HUGETLB_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/hw_breakpoint.h b/src/kernel/linux/v4.14/arch/sh/include/asm/hw_breakpoint.h
new file mode 100644
index 0000000..7431c17
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/hw_breakpoint.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_HW_BREAKPOINT_H
+#define __ASM_SH_HW_BREAKPOINT_H
+
+#include <uapi/asm/hw_breakpoint.h>
+
+#define __ARCH_HW_BREAKPOINT_H
+
+#include <linux/kdebug.h>
+#include <linux/types.h>
+
+struct arch_hw_breakpoint {
+	char		*name; /* Contains name of the symbol to set bkpt */
+	unsigned long	address;
+	u16		len;
+	u16		type;
+};
+
+enum {
+	SH_BREAKPOINT_READ	= (1 << 1),
+	SH_BREAKPOINT_WRITE	= (1 << 2),
+	SH_BREAKPOINT_RW	= SH_BREAKPOINT_READ | SH_BREAKPOINT_WRITE,
+
+	SH_BREAKPOINT_LEN_1	= (1 << 12),
+	SH_BREAKPOINT_LEN_2	= (1 << 13),
+	SH_BREAKPOINT_LEN_4	= SH_BREAKPOINT_LEN_1 | SH_BREAKPOINT_LEN_2,
+	SH_BREAKPOINT_LEN_8	= (1 << 14),
+};
+
+struct sh_ubc {
+	const char	*name;
+	unsigned int	num_events;
+	unsigned int	trap_nr;
+	void		(*enable)(struct arch_hw_breakpoint *, int);
+	void		(*disable)(struct arch_hw_breakpoint *, int);
+	void		(*enable_all)(unsigned long);
+	void		(*disable_all)(void);
+	unsigned long	(*active_mask)(void);
+	unsigned long	(*triggered_mask)(void);
+	void		(*clear_triggered_mask)(unsigned long);
+	struct clk	*clk;	/* optional interface clock / MSTP bit */
+};
+
+struct perf_event;
+struct task_struct;
+struct pmu;
+
+/* Maximum number of UBC channels */
+#define HBP_NUM		2
+
+static inline int hw_breakpoint_slots(int type)
+{
+	return HBP_NUM;
+}
+
+/* arch/sh/kernel/hw_breakpoint.c */
+extern int arch_check_bp_in_kernelspace(struct perf_event *bp);
+extern int arch_validate_hwbkpt_settings(struct perf_event *bp);
+extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+					   unsigned long val, void *data);
+
+int arch_install_hw_breakpoint(struct perf_event *bp);
+void arch_uninstall_hw_breakpoint(struct perf_event *bp);
+void hw_breakpoint_pmu_read(struct perf_event *bp);
+
+extern void arch_fill_perf_breakpoint(struct perf_event *bp);
+extern int register_sh_ubc(struct sh_ubc *);
+
+extern struct pmu perf_ops_bp;
+
+#endif /* __ASM_SH_HW_BREAKPOINT_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/hw_irq.h b/src/kernel/linux/v4.14/arch/sh/include/asm/hw_irq.h
new file mode 100644
index 0000000..ce23e33
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/hw_irq.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_HW_IRQ_H
+#define __ASM_SH_HW_IRQ_H
+
+#include <linux/init.h>
+#include <linux/sh_intc.h>
+#include <linux/atomic.h>
+
+extern atomic_t irq_err_count;
+
+struct ipr_data {
+	unsigned char irq;
+	unsigned char ipr_idx;		/* Index for the IPR registered */
+	unsigned char shift;		/* Number of bits to shift the data */
+	unsigned char priority;		/* The priority */
+};
+
+struct ipr_desc {
+	unsigned long *ipr_offsets;
+	unsigned int nr_offsets;
+	struct ipr_data *ipr_data;
+	unsigned int nr_irqs;
+	struct irq_chip chip;
+};
+
+void register_ipr_controller(struct ipr_desc *);
+
+void __init plat_irq_setup(void);
+void __init plat_irq_setup_sh3(void);
+void __init plat_irq_setup_pins(int mode);
+
+enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
+       IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,
+       IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
+
+#endif /* __ASM_SH_HW_IRQ_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/i2c-sh7760.h b/src/kernel/linux/v4.14/arch/sh/include/asm/i2c-sh7760.h
new file mode 100644
index 0000000..a777f14
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/i2c-sh7760.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * MMIO/IRQ and platform data for SH7760 I2C channels
+ */
+
+#ifndef _I2C_SH7760_H_
+#define _I2C_SH7760_H_
+
+#define SH7760_I2C_DEVNAME	"sh7760-i2c"
+
+#define SH7760_I2C0_MMIO	0xFE140000
+#define SH7760_I2C0_MMIOEND	0xFE14003B
+
+#define SH7760_I2C1_MMIO	0xFE150000
+#define SH7760_I2C1_MMIOEND	0xFE15003B
+
+struct sh7760_i2c_platdata {
+	unsigned int speed_khz;
+};
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/io.h b/src/kernel/linux/v4.14/arch/sh/include/asm/io.h
new file mode 100644
index 0000000..0ae60d6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/io.h
@@ -0,0 +1,397 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_IO_H
+#define __ASM_SH_IO_H
+
+/*
+ * Convention:
+ *    read{b,w,l,q}/write{b,w,l,q} are for PCI,
+ *    while in{b,w,l}/out{b,w,l} are for ISA
+ *
+ * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p
+ * and 'string' versions: ins{b,w,l}/outs{b,w,l}
+ *
+ * While read{b,w,l,q} and write{b,w,l,q} contain memory barriers
+ * automatically, there are also __raw versions, which do not.
+ */
+#include <linux/errno.h>
+#include <asm/cache.h>
+#include <asm/addrspace.h>
+#include <asm/machvec.h>
+#include <asm/pgtable.h>
+#include <asm-generic/iomap.h>
+
+#ifdef __KERNEL__
+#define __IO_PREFIX     generic
+#include <asm/io_generic.h>
+#include <asm/io_trapped.h>
+#include <mach/mangle-port.h>
+
+#define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile u8  __force *)(a) = (v))
+#define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v))
+#define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v))
+#define __raw_writeq(v,a)	(__chk_io_ptr(a), *(volatile u64 __force *)(a) = (v))
+
+#define __raw_readb(a)		(__chk_io_ptr(a), *(volatile u8  __force *)(a))
+#define __raw_readw(a)		(__chk_io_ptr(a), *(volatile u16 __force *)(a))
+#define __raw_readl(a)		(__chk_io_ptr(a), *(volatile u32 __force *)(a))
+#define __raw_readq(a)		(__chk_io_ptr(a), *(volatile u64 __force *)(a))
+
+#define readb_relaxed(c)	({ u8  __v = ioswabb(__raw_readb(c)); __v; })
+#define readw_relaxed(c)	({ u16 __v = ioswabw(__raw_readw(c)); __v; })
+#define readl_relaxed(c)	({ u32 __v = ioswabl(__raw_readl(c)); __v; })
+#define readq_relaxed(c)	({ u64 __v = ioswabq(__raw_readq(c)); __v; })
+
+#define writeb_relaxed(v,c)	((void)__raw_writeb((__force  u8)ioswabb(v),c))
+#define writew_relaxed(v,c)	((void)__raw_writew((__force u16)ioswabw(v),c))
+#define writel_relaxed(v,c)	((void)__raw_writel((__force u32)ioswabl(v),c))
+#define writeq_relaxed(v,c)	((void)__raw_writeq((__force u64)ioswabq(v),c))
+
+#define readb(a)		({ u8  r_ = readb_relaxed(a); rmb(); r_; })
+#define readw(a)		({ u16 r_ = readw_relaxed(a); rmb(); r_; })
+#define readl(a)		({ u32 r_ = readl_relaxed(a); rmb(); r_; })
+#define readq(a)		({ u64 r_ = readq_relaxed(a); rmb(); r_; })
+
+#define writeb(v,a)		({ wmb(); writeb_relaxed((v),(a)); })
+#define writew(v,a)		({ wmb(); writew_relaxed((v),(a)); })
+#define writel(v,a)		({ wmb(); writel_relaxed((v),(a)); })
+#define writeq(v,a)		({ wmb(); writeq_relaxed((v),(a)); })
+
+#define readsb(p,d,l)		__raw_readsb(p,d,l)
+#define readsw(p,d,l)		__raw_readsw(p,d,l)
+#define readsl(p,d,l)		__raw_readsl(p,d,l)
+
+#define writesb(p,d,l)		__raw_writesb(p,d,l)
+#define writesw(p,d,l)		__raw_writesw(p,d,l)
+#define writesl(p,d,l)		__raw_writesl(p,d,l)
+
+#define __BUILD_UNCACHED_IO(bwlq, type)					\
+static inline type read##bwlq##_uncached(unsigned long addr)		\
+{									\
+	type ret;							\
+	jump_to_uncached();						\
+	ret = __raw_read##bwlq(addr);					\
+	back_to_cached();						\
+	return ret;							\
+}									\
+									\
+static inline void write##bwlq##_uncached(type v, unsigned long addr)	\
+{									\
+	jump_to_uncached();						\
+	__raw_write##bwlq(v, addr);					\
+	back_to_cached();						\
+}
+
+__BUILD_UNCACHED_IO(b, u8)
+__BUILD_UNCACHED_IO(w, u16)
+__BUILD_UNCACHED_IO(l, u32)
+__BUILD_UNCACHED_IO(q, u64)
+
+#define __BUILD_MEMORY_STRING(pfx, bwlq, type)				\
+									\
+static inline void							\
+pfx##writes##bwlq(volatile void __iomem *mem, const void *addr,		\
+		  unsigned int count)					\
+{									\
+	const volatile type *__addr = addr;				\
+									\
+	while (count--) {						\
+		__raw_write##bwlq(*__addr, mem);			\
+		__addr++;						\
+	}								\
+}									\
+									\
+static inline void pfx##reads##bwlq(volatile void __iomem *mem,		\
+				    void *addr, unsigned int count)	\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		*__addr = __raw_read##bwlq(mem);			\
+		__addr++;						\
+	}								\
+}
+
+__BUILD_MEMORY_STRING(__raw_, b, u8)
+__BUILD_MEMORY_STRING(__raw_, w, u16)
+
+#ifdef CONFIG_SUPERH32
+void __raw_writesl(void __iomem *addr, const void *data, int longlen);
+void __raw_readsl(const void __iomem *addr, void *data, int longlen);
+#else
+__BUILD_MEMORY_STRING(__raw_, l, u32)
+#endif
+
+__BUILD_MEMORY_STRING(__raw_, q, u64)
+
+#ifdef CONFIG_HAS_IOPORT_MAP
+
+/*
+ * Slowdown I/O port space accesses for antique hardware.
+ */
+#undef CONF_SLOWDOWN_IO
+
+/*
+ * On SuperH I/O ports are memory mapped, so we access them using normal
+ * load/store instructions. sh_io_port_base is the virtual address to
+ * which all ports are being mapped.
+ */
+extern unsigned long sh_io_port_base;
+
+static inline void __set_io_port_base(unsigned long pbase)
+{
+	*(unsigned long *)&sh_io_port_base = pbase;
+	barrier();
+}
+
+#ifdef CONFIG_GENERIC_IOMAP
+#define __ioport_map ioport_map
+#else
+extern void __iomem *__ioport_map(unsigned long addr, unsigned int size);
+#endif
+
+#ifdef CONF_SLOWDOWN_IO
+#define SLOW_DOWN_IO __raw_readw(sh_io_port_base)
+#else
+#define SLOW_DOWN_IO
+#endif
+
+#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow)			\
+									\
+static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
+{									\
+	volatile type *__addr;						\
+									\
+	__addr = __ioport_map(port, sizeof(type));			\
+	*__addr = val;							\
+	slow;								\
+}									\
+									\
+static inline type pfx##in##bwlq##p(unsigned long port)			\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = __ioport_map(port, sizeof(type));			\
+	__val = *__addr;						\
+	slow;								\
+									\
+	return __val;							\
+}
+
+#define __BUILD_IOPORT_PFX(bus, bwlq, type)				\
+	__BUILD_IOPORT_SINGLE(bus, bwlq, type, ,)			\
+	__BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
+
+#define BUILDIO_IOPORT(bwlq, type)					\
+	__BUILD_IOPORT_PFX(, bwlq, type)
+
+BUILDIO_IOPORT(b, u8)
+BUILDIO_IOPORT(w, u16)
+BUILDIO_IOPORT(l, u32)
+BUILDIO_IOPORT(q, u64)
+
+#define __BUILD_IOPORT_STRING(bwlq, type)				\
+									\
+static inline void outs##bwlq(unsigned long port, const void *addr,	\
+			      unsigned int count)			\
+{									\
+	const volatile type *__addr = addr;				\
+									\
+	while (count--) {						\
+		out##bwlq(*__addr, port);				\
+		__addr++;						\
+	}								\
+}									\
+									\
+static inline void ins##bwlq(unsigned long port, void *addr,		\
+			     unsigned int count)			\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		*__addr = in##bwlq(port);				\
+		__addr++;						\
+	}								\
+}
+
+__BUILD_IOPORT_STRING(b, u8)
+__BUILD_IOPORT_STRING(w, u16)
+__BUILD_IOPORT_STRING(l, u32)
+__BUILD_IOPORT_STRING(q, u64)
+
+#else /* !CONFIG_HAS_IOPORT_MAP */
+
+#include <asm/io_noioport.h>
+
+#endif
+
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/* synco on SH-4A, otherwise a nop */
+#define mmiowb()		wmb()
+
+/* We really want to try and get these to memcpy etc */
+void memcpy_fromio(void *, const volatile void __iomem *, unsigned long);
+void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
+void memset_io(volatile void __iomem *, int, unsigned long);
+
+/* Quad-word real-mode I/O, don't ask.. */
+unsigned long long peek_real_address_q(unsigned long long addr);
+unsigned long long poke_real_address_q(unsigned long long addr,
+				       unsigned long long val);
+
+#if !defined(CONFIG_MMU)
+#define virt_to_phys(address)	((unsigned long)(address))
+#define phys_to_virt(address)	((void *)(address))
+#else
+#define virt_to_phys(address)	(__pa(address))
+#define phys_to_virt(address)	(__va(address))
+#endif
+
+/*
+ * On 32-bit SH, we traditionally have the whole physical address space
+ * mapped at all times (as MIPS does), so "ioremap()" and "iounmap()" do
+ * not need to do anything but place the address in the proper segment.
+ * This is true for P1 and P2 addresses, as well as some P3 ones.
+ * However, most of the P3 addresses and newer cores using extended
+ * addressing need to map through page tables, so the ioremap()
+ * implementation becomes a bit more complicated.
+ *
+ * See arch/sh/mm/ioremap.c for additional notes on this.
+ *
+ * We cheat a bit and always return uncachable areas until we've fixed
+ * the drivers to handle caching properly.
+ *
+ * On the SH-5 the concept of segmentation in the 1:1 PXSEG sense simply
+ * doesn't exist, so everything must go through page tables.
+ */
+#ifdef CONFIG_MMU
+void __iomem *__ioremap_caller(phys_addr_t offset, unsigned long size,
+			       pgprot_t prot, void *caller);
+void __iounmap(void __iomem *addr);
+
+static inline void __iomem *
+__ioremap(phys_addr_t offset, unsigned long size, pgprot_t prot)
+{
+	return __ioremap_caller(offset, size, prot, __builtin_return_address(0));
+}
+
+static inline void __iomem *
+__ioremap_29bit(phys_addr_t offset, unsigned long size, pgprot_t prot)
+{
+#ifdef CONFIG_29BIT
+	phys_addr_t last_addr = offset + size - 1;
+
+	/*
+	 * For P1 and P2 space this is trivial, as everything is already
+	 * mapped. Uncached access for P1 addresses are done through P2.
+	 * In the P3 case or for addresses outside of the 29-bit space,
+	 * mapping must be done by the PMB or by using page tables.
+	 */
+	if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) {
+		u64 flags = pgprot_val(prot);
+
+		/*
+		 * Anything using the legacy PTEA space attributes needs
+		 * to be kicked down to page table mappings.
+		 */
+		if (unlikely(flags & _PAGE_PCC_MASK))
+			return NULL;
+		if (unlikely(flags & _PAGE_CACHABLE))
+			return (void __iomem *)P1SEGADDR(offset);
+
+		return (void __iomem *)P2SEGADDR(offset);
+	}
+
+	/* P4 above the store queues are always mapped. */
+	if (unlikely(offset >= P3_ADDR_MAX))
+		return (void __iomem *)P4SEGADDR(offset);
+#endif
+
+	return NULL;
+}
+
+static inline void __iomem *
+__ioremap_mode(phys_addr_t offset, unsigned long size, pgprot_t prot)
+{
+	void __iomem *ret;
+
+	ret = __ioremap_trapped(offset, size);
+	if (ret)
+		return ret;
+
+	ret = __ioremap_29bit(offset, size, prot);
+	if (ret)
+		return ret;
+
+	return __ioremap(offset, size, prot);
+}
+#else
+#define __ioremap(offset, size, prot)		((void __iomem *)(offset))
+#define __ioremap_mode(offset, size, prot)	((void __iomem *)(offset))
+#define __iounmap(addr)				do { } while (0)
+#endif /* CONFIG_MMU */
+
+static inline void __iomem *ioremap(phys_addr_t offset, unsigned long size)
+{
+	return __ioremap_mode(offset, size, PAGE_KERNEL_NOCACHE);
+}
+
+static inline void __iomem *
+ioremap_cache(phys_addr_t offset, unsigned long size)
+{
+	return __ioremap_mode(offset, size, PAGE_KERNEL);
+}
+#define ioremap_cache ioremap_cache
+
+#ifdef CONFIG_HAVE_IOREMAP_PROT
+static inline void __iomem *
+ioremap_prot(phys_addr_t offset, unsigned long size, unsigned long flags)
+{
+	return __ioremap_mode(offset, size, __pgprot(flags));
+}
+#endif
+
+#ifdef CONFIG_IOREMAP_FIXED
+extern void __iomem *ioremap_fixed(phys_addr_t, unsigned long, pgprot_t);
+extern int iounmap_fixed(void __iomem *);
+extern void ioremap_fixed_init(void);
+#else
+static inline void __iomem *
+ioremap_fixed(phys_addr_t phys_addr, unsigned long size, pgprot_t prot)
+{
+	BUG();
+	return NULL;
+}
+
+static inline void ioremap_fixed_init(void) { }
+static inline int iounmap_fixed(void __iomem *addr) { return -EINVAL; }
+#endif
+
+#define ioremap_nocache	ioremap
+#define ioremap_uc	ioremap
+
+static inline void iounmap(void __iomem *addr)
+{
+	__iounmap(addr);
+}
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
+int valid_phys_addr_range(phys_addr_t addr, size_t size);
+int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_IO_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/io_generic.h b/src/kernel/linux/v4.14/arch/sh/include/asm/io_generic.h
new file mode 100644
index 0000000..87ec38f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/io_generic.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Trivial I/O routine definitions, intentionally meant to be included
+ * multiple times. Ugly I/O routine concatenation helpers taken from
+ * alpha. Must be included _before_ io.h to avoid preprocessor-induced
+ * routine mismatch.
+ */
+#define IO_CONCAT(a,b)	_IO_CONCAT(a,b)
+#define _IO_CONCAT(a,b)	a ## _ ## b
+
+#ifndef __IO_PREFIX
+#error "Don't include this header without a valid system prefix"
+#endif
+
+void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size);
+void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr);
+void IO_CONCAT(__IO_PREFIX,mem_init)(void);
+
+#undef __IO_PREFIX
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/io_noioport.h b/src/kernel/linux/v4.14/arch/sh/include/asm/io_noioport.h
new file mode 100644
index 0000000..90d6109
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/io_noioport.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_IO_NOIOPORT_H
+#define __ASM_SH_IO_NOIOPORT_H
+
+static inline u8 inb(unsigned long addr)
+{
+	BUG();
+	return -1;
+}
+
+static inline u16 inw(unsigned long addr)
+{
+	BUG();
+	return -1;
+}
+
+static inline u32 inl(unsigned long addr)
+{
+	BUG();
+	return -1;
+}
+
+static inline void outb(unsigned char x, unsigned long port)
+{
+	BUG();
+}
+
+static inline void outw(unsigned short x, unsigned long port)
+{
+	BUG();
+}
+
+static inline void outl(unsigned int x, unsigned long port)
+{
+	BUG();
+}
+
+static inline void __iomem *ioport_map(unsigned long port, unsigned int size)
+{
+	BUG();
+	return NULL;
+}
+
+static inline void ioport_unmap(void __iomem *addr)
+{
+	BUG();
+}
+
+#define inb_p(addr)	inb(addr)
+#define inw_p(addr)	inw(addr)
+#define inl_p(addr)	inl(addr)
+#define outb_p(x, addr)	outb((x), (addr))
+#define outw_p(x, addr)	outw((x), (addr))
+#define outl_p(x, addr)	outl((x), (addr))
+
+#define insb(a, b, c)	BUG()
+#define insw(a, b, c)	BUG()
+#define insl(a, b, c)	BUG()
+
+#define outsb(a, b, c)	BUG()
+#define outsw(a, b, c)	BUG()
+#define outsl(a, b, c)	BUG()
+
+#endif /* __ASM_SH_IO_NOIOPORT_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/io_trapped.h b/src/kernel/linux/v4.14/arch/sh/include/asm/io_trapped.h
new file mode 100644
index 0000000..ac01b20
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/io_trapped.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_IO_TRAPPED_H
+#define __ASM_SH_IO_TRAPPED_H
+
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <asm/page.h>
+
+#define IO_TRAPPED_MAGIC 0xfeedbeef
+
+struct trapped_io {
+	unsigned int magic;
+	struct resource *resource;
+	unsigned int num_resources;
+	unsigned int minimum_bus_width;
+	struct list_head list;
+	void __iomem *virt_base;
+} __aligned(PAGE_SIZE);
+
+#ifdef CONFIG_IO_TRAPPED
+int register_trapped_io(struct trapped_io *tiop);
+int handle_trapped_io(struct pt_regs *regs, unsigned long address);
+
+void __iomem *match_trapped_io_handler(struct list_head *list,
+				       unsigned long offset,
+				       unsigned long size);
+
+#ifdef CONFIG_HAS_IOMEM
+extern struct list_head trapped_mem;
+
+static inline void __iomem *
+__ioremap_trapped(unsigned long offset, unsigned long size)
+{
+	return match_trapped_io_handler(&trapped_mem, offset, size);
+}
+#else
+#define __ioremap_trapped(offset, size) NULL
+#endif
+
+#ifdef CONFIG_HAS_IOPORT_MAP
+extern struct list_head trapped_io;
+
+static inline void __iomem *
+__ioport_map_trapped(unsigned long offset, unsigned long size)
+{
+	return match_trapped_io_handler(&trapped_io, offset, size);
+}
+#else
+#define __ioport_map_trapped(offset, size) NULL
+#endif
+
+#else
+#define register_trapped_io(tiop) (-1)
+#define handle_trapped_io(tiop, address) 0
+#define __ioremap_trapped(offset, size) NULL
+#define __ioport_map_trapped(offset, size) NULL
+#endif
+
+#endif /* __ASM_SH_IO_TRAPPED_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/irq.h b/src/kernel/linux/v4.14/arch/sh/include/asm/irq.h
new file mode 100644
index 0000000..8065a32
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/irq.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_IRQ_H
+#define __ASM_SH_IRQ_H
+
+#include <linux/cpumask.h>
+#include <asm/machvec.h>
+
+/*
+ * Only legacy non-sparseirq platforms have to set a reasonably sane
+ * value here. sparseirq platforms allocate their irq_descs on the fly,
+ * so will expand automatically based on the number of registered IRQs.
+ */
+#ifdef CONFIG_SPARSE_IRQ
+# define NR_IRQS		8
+#else
+# define NR_IRQS		512
+#endif
+
+/*
+ * This is a special IRQ number for indicating that no IRQ has been
+ * triggered and to simply ignore the IRQ dispatch. This is a special
+ * case that can happen with IRQ auto-distribution when multiple CPUs
+ * are woken up and signalled in parallel.
+ */
+#define NO_IRQ_IGNORE		((unsigned int)-1)
+
+/*
+ * Simple Mask Register Support
+ */
+extern void make_maskreg_irq(unsigned int irq);
+extern unsigned short *irq_mask_register;
+
+/*
+ * PINT IRQs
+ */
+void init_IRQ_pint(void);
+void make_imask_irq(unsigned int irq);
+
+static inline int generic_irq_demux(int irq)
+{
+	return irq;
+}
+
+#define irq_demux(irq)		sh_mv.mv_irq_demux(irq)
+
+void init_IRQ(void);
+void migrate_irqs(void);
+
+asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs);
+
+#ifdef CONFIG_IRQSTACKS
+extern void irq_ctx_init(int cpu);
+extern void irq_ctx_exit(int cpu);
+# define __ARCH_HAS_DO_SOFTIRQ
+#else
+# define irq_ctx_init(cpu) do { } while (0)
+# define irq_ctx_exit(cpu) do { } while (0)
+#endif
+
+#ifdef CONFIG_INTC_BALANCING
+extern unsigned int irq_lookup(unsigned int irq);
+extern void irq_finish(unsigned int irq);
+#else
+#define irq_lookup(irq)		(irq)
+#define irq_finish(irq)		do { } while (0)
+#endif
+
+#include <asm-generic/irq.h>
+#ifdef CONFIG_CPU_SH5
+#include <cpu/irq.h>
+#endif
+
+#endif /* __ASM_SH_IRQ_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/irqflags.h b/src/kernel/linux/v4.14/arch/sh/include/asm/irqflags.h
new file mode 100644
index 0000000..25f6cfe
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/irqflags.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_IRQFLAGS_H
+#define __ASM_SH_IRQFLAGS_H
+
+#define ARCH_IRQ_DISABLED	0xf0
+#define ARCH_IRQ_ENABLED	0x00
+
+#include <asm-generic/irqflags.h>
+
+#endif /* __ASM_SH_IRQFLAGS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/kdebug.h b/src/kernel/linux/v4.14/arch/sh/include/asm/kdebug.h
new file mode 100644
index 0000000..5212f5f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/kdebug.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_KDEBUG_H
+#define __ASM_SH_KDEBUG_H
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_TRAP,
+	DIE_NMI,
+	DIE_OOPS,
+	DIE_BREAKPOINT,
+	DIE_SSTEP,
+};
+
+/* arch/sh/kernel/dumpstack.c */
+extern void printk_address(unsigned long address, int reliable);
+extern void dump_mem(const char *str, unsigned long bottom, unsigned long top);
+
+#endif /* __ASM_SH_KDEBUG_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/kexec.h b/src/kernel/linux/v4.14/arch/sh/include/asm/kexec.h
new file mode 100644
index 0000000..fd5f331
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/kexec.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_KEXEC_H
+#define __ASM_SH_KEXEC_H
+
+#include <asm/ptrace.h>
+#include <asm/string.h>
+
+/*
+ * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
+ * I.e. Maximum page that is mapped directly into kernel memory,
+ * and kmap is not required.
+ *
+ * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct
+ * calculation for the amount of memory directly mappable into the
+ * kernel memory space.
+ */
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+/* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+
+#define KEXEC_CONTROL_PAGE_SIZE	4096
+
+/* The native architecture */
+#define KEXEC_ARCH KEXEC_ARCH_SH
+
+#ifdef CONFIG_KEXEC
+/* arch/sh/kernel/machine_kexec.c */
+void reserve_crashkernel(void);
+
+static inline void crash_setup_regs(struct pt_regs *newregs,
+				    struct pt_regs *oldregs)
+{
+	if (oldregs)
+		memcpy(newregs, oldregs, sizeof(*newregs));
+	else {
+		__asm__ __volatile__ ("mov r0, %0" : "=r" (newregs->regs[0]));
+		__asm__ __volatile__ ("mov r1, %0" : "=r" (newregs->regs[1]));
+		__asm__ __volatile__ ("mov r2, %0" : "=r" (newregs->regs[2]));
+		__asm__ __volatile__ ("mov r3, %0" : "=r" (newregs->regs[3]));
+		__asm__ __volatile__ ("mov r4, %0" : "=r" (newregs->regs[4]));
+		__asm__ __volatile__ ("mov r5, %0" : "=r" (newregs->regs[5]));
+		__asm__ __volatile__ ("mov r6, %0" : "=r" (newregs->regs[6]));
+		__asm__ __volatile__ ("mov r7, %0" : "=r" (newregs->regs[7]));
+		__asm__ __volatile__ ("mov r8, %0" : "=r" (newregs->regs[8]));
+		__asm__ __volatile__ ("mov r9, %0" : "=r" (newregs->regs[9]));
+		__asm__ __volatile__ ("mov r10, %0" : "=r" (newregs->regs[10]));
+		__asm__ __volatile__ ("mov r11, %0" : "=r" (newregs->regs[11]));
+		__asm__ __volatile__ ("mov r12, %0" : "=r" (newregs->regs[12]));
+		__asm__ __volatile__ ("mov r13, %0" : "=r" (newregs->regs[13]));
+		__asm__ __volatile__ ("mov r14, %0" : "=r" (newregs->regs[14]));
+		__asm__ __volatile__ ("mov r15, %0" : "=r" (newregs->regs[15]));
+
+		__asm__ __volatile__ ("sts pr, %0" : "=r" (newregs->pr));
+		__asm__ __volatile__ ("sts macl, %0" : "=r" (newregs->macl));
+		__asm__ __volatile__ ("sts mach, %0" : "=r" (newregs->mach));
+
+		__asm__ __volatile__ ("stc gbr, %0" : "=r" (newregs->gbr));
+		__asm__ __volatile__ ("stc sr, %0" : "=r" (newregs->sr));
+
+		newregs->pc = (unsigned long)current_text_addr();
+	}
+}
+#else
+static inline void reserve_crashkernel(void) { }
+#endif /* CONFIG_KEXEC */
+
+#endif /* __ASM_SH_KEXEC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/kgdb.h b/src/kernel/linux/v4.14/arch/sh/include/asm/kgdb.h
new file mode 100644
index 0000000..0d5b840
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/kgdb.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_KGDB_H
+#define __ASM_SH_KGDB_H
+
+#include <asm/cacheflush.h>
+#include <asm/ptrace.h>
+
+enum regnames {
+	GDB_R0, GDB_R1, GDB_R2, GDB_R3, GDB_R4, GDB_R5, GDB_R6, GDB_R7,
+	GDB_R8, GDB_R9, GDB_R10, GDB_R11, GDB_R12, GDB_R13, GDB_R14, GDB_R15,
+
+	GDB_PC, GDB_PR, GDB_SR, GDB_GBR, GDB_MACH, GDB_MACL, GDB_VBR,
+};
+
+#define _GP_REGS	16
+#define _EXTRA_REGS	7
+#define GDB_SIZEOF_REG	sizeof(u32)
+
+#define DBG_MAX_REG_NUM	(_GP_REGS + _EXTRA_REGS)
+#define NUMREGBYTES	(DBG_MAX_REG_NUM * sizeof(GDB_SIZEOF_REG))
+
+static inline void arch_kgdb_breakpoint(void)
+{
+	__asm__ __volatile__ ("trapa #0x3c\n");
+}
+
+#define BREAK_INSTR_SIZE	2
+#define BUFMAX			2048
+
+#ifdef CONFIG_SMP
+# define CACHE_FLUSH_IS_SAFE	0
+#else
+# define CACHE_FLUSH_IS_SAFE	1
+#endif
+
+#define GDB_ADJUSTS_BREAK_OFFSET
+
+#endif /* __ASM_SH_KGDB_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/kmap_types.h b/src/kernel/linux/v4.14/arch/sh/include/asm/kmap_types.h
new file mode 100644
index 0000000..b78107f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/kmap_types.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SH_KMAP_TYPES_H
+#define __SH_KMAP_TYPES_H
+
+/* Dummy header just to define km_type. */
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+#define  __WITH_KM_FENCE
+#endif
+
+#include <asm-generic/kmap_types.h>
+
+#undef __WITH_KM_FENCE
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/kprobes.h b/src/kernel/linux/v4.14/arch/sh/include/asm/kprobes.h
new file mode 100644
index 0000000..85d8bca
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/kprobes.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_KPROBES_H
+#define __ASM_SH_KPROBES_H
+
+#include <asm-generic/kprobes.h>
+
+#define BREAKPOINT_INSTRUCTION	0xc33a
+
+#ifdef CONFIG_KPROBES
+
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+typedef insn_size_t kprobe_opcode_t;
+
+#define MAX_INSN_SIZE 16
+#define MAX_STACK_SIZE 64
+#define MIN_STACK_SIZE(ADDR) (((MAX_STACK_SIZE) < \
+	(((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) \
+	? (MAX_STACK_SIZE) \
+	: (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
+
+#define flush_insn_slot(p)		do { } while (0)
+#define kretprobe_blacklist_size	0
+
+struct kprobe;
+
+void arch_remove_kprobe(struct kprobe *);
+void kretprobe_trampoline(void);
+void jprobe_return_end(void);
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+	/* copy of the original instruction */
+	kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	unsigned long jprobe_saved_r15;
+	struct pt_regs jprobe_saved_regs;
+	kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
+	struct prev_kprobe prev_kprobe;
+};
+
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+extern int kprobe_handle_illslot(unsigned long pc);
+#else
+
+#define kprobe_handle_illslot(pc)	(-1)
+
+#endif /* CONFIG_KPROBES */
+#endif /* __ASM_SH_KPROBES_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/linkage.h b/src/kernel/linux/v4.14/arch/sh/include/asm/linkage.h
new file mode 100644
index 0000000..7c2fa27
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/linkage.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .balign 4
+#define __ALIGN_STR ".balign 4"
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/machvec.h b/src/kernel/linux/v4.14/arch/sh/include/asm/machvec.h
new file mode 100644
index 0000000..d3324e4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/machvec.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/machvec.h
+ *
+ * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+
+#ifndef _ASM_SH_MACHVEC_H
+#define _ASM_SH_MACHVEC_H
+
+#include <linux/types.h>
+#include <linux/time.h>
+#include <generated/machtypes.h>
+
+struct sh_machine_vector {
+	void (*mv_setup)(char **cmdline_p);
+	const char *mv_name;
+
+	int (*mv_irq_demux)(int irq);
+	void (*mv_init_irq)(void);
+
+#ifdef CONFIG_HAS_IOPORT_MAP
+	void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
+	void (*mv_ioport_unmap)(void __iomem *);
+#endif
+
+	int (*mv_clk_init)(void);
+	int (*mv_mode_pins)(void);
+
+	void (*mv_mem_init)(void);
+	void (*mv_mem_reserve)(void);
+};
+
+extern struct sh_machine_vector sh_mv;
+
+#define get_system_type()	sh_mv.mv_name
+
+#define __initmv \
+	__used __section(.machvec.init)
+
+#endif /* _ASM_SH_MACHVEC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/mmu.h b/src/kernel/linux/v4.14/arch/sh/include/asm/mmu.h
new file mode 100644
index 0000000..172e329
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/mmu.h
@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MMU_H
+#define __MMU_H
+
+/*
+ * Privileged Space Mapping Buffer (PMB) definitions
+ */
+#define PMB_PASCR		0xff000070
+#define PMB_IRMCR		0xff000078
+
+#define PASCR_SE		0x80000000
+
+#define PMB_ADDR		0xf6100000
+#define PMB_DATA		0xf7100000
+
+#define NR_PMB_ENTRIES		16
+
+#define PMB_E_MASK		0x0000000f
+#define PMB_E_SHIFT		8
+
+#define PMB_PFN_MASK		0xff000000
+
+#define PMB_SZ_16M		0x00000000
+#define PMB_SZ_64M		0x00000010
+#define PMB_SZ_128M		0x00000080
+#define PMB_SZ_512M		0x00000090
+#define PMB_SZ_MASK		PMB_SZ_512M
+#define PMB_C			0x00000008
+#define PMB_WT			0x00000001
+#define PMB_UB			0x00000200
+#define PMB_CACHE_MASK		(PMB_C | PMB_WT | PMB_UB)
+#define PMB_V			0x00000100
+
+#define PMB_NO_ENTRY		(-1)
+
+#ifndef __ASSEMBLY__
+#include <linux/errno.h>
+#include <linux/threads.h>
+#include <asm/page.h>
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_id_t[NR_CPUS];
+
+typedef struct {
+#ifdef CONFIG_MMU
+	mm_context_id_t		id;
+	void			*vdso;
+#else
+	unsigned long		end_brk;
+#endif
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	unsigned long		exec_fdpic_loadmap;
+	unsigned long		interp_fdpic_loadmap;
+#endif
+} mm_context_t;
+
+#ifdef CONFIG_PMB
+/* arch/sh/mm/pmb.c */
+bool __in_29bit_mode(void);
+
+void pmb_init(void);
+int pmb_bolt_mapping(unsigned long virt, phys_addr_t phys,
+		     unsigned long size, pgprot_t prot);
+void __iomem *pmb_remap_caller(phys_addr_t phys, unsigned long size,
+			       pgprot_t prot, void *caller);
+int pmb_unmap(void __iomem *addr);
+
+#else
+
+static inline int
+pmb_bolt_mapping(unsigned long virt, phys_addr_t phys,
+		 unsigned long size, pgprot_t prot)
+{
+	return -EINVAL;
+}
+
+static inline void __iomem *
+pmb_remap_caller(phys_addr_t phys, unsigned long size,
+		 pgprot_t prot, void *caller)
+{
+	return NULL;
+}
+
+static inline int pmb_unmap(void __iomem *addr)
+{
+	return -EINVAL;
+}
+
+#define pmb_init(addr)		do { } while (0)
+
+#ifdef CONFIG_29BIT
+#define __in_29bit_mode()	(1)
+#else
+#define __in_29bit_mode()	(0)
+#endif
+
+#endif /* CONFIG_PMB */
+
+static inline void __iomem *
+pmb_remap(phys_addr_t phys, unsigned long size, pgprot_t prot)
+{
+	return pmb_remap_caller(phys, size, prot, __builtin_return_address(0));
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __MMU_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/mmu_context.h b/src/kernel/linux/v4.14/arch/sh/include/asm/mmu_context.h
new file mode 100644
index 0000000..2d09650
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/mmu_context.h
@@ -0,0 +1,193 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 - 2007 Paul Mundt
+ *
+ * ASID handling idea taken from MIPS implementation.
+ */
+#ifndef __ASM_SH_MMU_CONTEXT_H
+#define __ASM_SH_MMU_CONTEXT_H
+
+#ifdef __KERNEL__
+#include <cpu/mmu_context.h>
+#include <asm/tlbflush.h>
+#include <linux/uaccess.h>
+#include <linux/mm_types.h>
+
+#include <asm/io.h>
+#include <asm-generic/mm_hooks.h>
+
+/*
+ * The MMU "context" consists of two things:
+ *    (a) TLB cache version (or round, cycle whatever expression you like)
+ *    (b) ASID (Address Space IDentifier)
+ */
+#ifdef CONFIG_CPU_HAS_PTEAEX
+#define MMU_CONTEXT_ASID_MASK		0x0000ffff
+#else
+#define MMU_CONTEXT_ASID_MASK		0x000000ff
+#endif
+
+#define MMU_CONTEXT_VERSION_MASK	(~0UL & ~MMU_CONTEXT_ASID_MASK)
+#define MMU_CONTEXT_FIRST_VERSION	(MMU_CONTEXT_ASID_MASK + 1)
+
+/* Impossible ASID value, to differentiate from NO_CONTEXT. */
+#define MMU_NO_ASID			MMU_CONTEXT_FIRST_VERSION
+#define NO_CONTEXT			0UL
+
+#define asid_cache(cpu)		(cpu_data[cpu].asid_cache)
+
+#ifdef CONFIG_MMU
+#define cpu_context(cpu, mm)	((mm)->context.id[cpu])
+
+#define cpu_asid(cpu, mm)	\
+	(cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK)
+
+/*
+ * Virtual Page Number mask
+ */
+#define MMU_VPN_MASK	0xfffff000
+
+#if defined(CONFIG_SUPERH32)
+#include <asm/mmu_context_32.h>
+#else
+#include <asm/mmu_context_64.h>
+#endif
+
+/*
+ * Get MMU context if needed.
+ */
+static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu)
+{
+	unsigned long asid = asid_cache(cpu);
+
+	/* Check if we have old version of context. */
+	if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0)
+		/* It's up to date, do nothing */
+		return;
+
+	/* It's old, we need to get new context with new version. */
+	if (!(++asid & MMU_CONTEXT_ASID_MASK)) {
+		/*
+		 * We exhaust ASID of this version.
+		 * Flush all TLB and start new cycle.
+		 */
+		local_flush_tlb_all();
+
+#ifdef CONFIG_SUPERH64
+		/*
+		 * The SH-5 cache uses the ASIDs, requiring both the I and D
+		 * cache to be flushed when the ASID is exhausted. Weak.
+		 */
+		flush_cache_all();
+#endif
+
+		/*
+		 * Fix version; Note that we avoid version #0
+		 * to distinguish NO_CONTEXT.
+		 */
+		if (!asid)
+			asid = MMU_CONTEXT_FIRST_VERSION;
+	}
+
+	cpu_context(cpu, mm) = asid_cache(cpu) = asid;
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int init_new_context(struct task_struct *tsk,
+				   struct mm_struct *mm)
+{
+	int i;
+
+	for_each_online_cpu(i)
+		cpu_context(i, mm) = NO_CONTEXT;
+
+	return 0;
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_context(struct mm_struct *mm, unsigned int cpu)
+{
+	get_mmu_context(mm, cpu);
+	set_asid(cpu_asid(cpu, mm));
+}
+
+static inline void switch_mm(struct mm_struct *prev,
+			     struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	unsigned int cpu = smp_processor_id();
+
+	if (likely(prev != next)) {
+		cpumask_set_cpu(cpu, mm_cpumask(next));
+		set_TTB(next->pgd);
+		activate_context(next, cpu);
+	} else
+		if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)))
+			activate_context(next, cpu);
+}
+
+#define activate_mm(prev, next)		switch_mm((prev),(next),NULL)
+#define deactivate_mm(tsk,mm)		do { } while (0)
+#define enter_lazy_tlb(mm,tsk)		do { } while (0)
+
+#else
+
+#define set_asid(asid)			do { } while (0)
+#define get_asid()			(0)
+#define cpu_asid(cpu, mm)		({ (void)cpu; NO_CONTEXT; })
+#define switch_and_save_asid(asid)	(0)
+#define set_TTB(pgd)			do { } while (0)
+#define get_TTB()			(0)
+
+#include <asm-generic/mmu_context.h>
+
+#endif /* CONFIG_MMU */
+
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
+/*
+ * If this processor has an MMU, we need methods to turn it off/on ..
+ * paging_init() will also have to be updated for the processor in
+ * question.
+ */
+static inline void enable_mmu(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	/* Enable MMU */
+	__raw_writel(MMU_CONTROL_INIT, MMUCR);
+	ctrl_barrier();
+
+	if (asid_cache(cpu) == NO_CONTEXT)
+		asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION;
+
+	set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK);
+}
+
+static inline void disable_mmu(void)
+{
+	unsigned long cr;
+
+	cr = __raw_readl(MMUCR);
+	cr &= ~MMU_CONTROL_INIT;
+	__raw_writel(cr, MMUCR);
+
+	ctrl_barrier();
+}
+#else
+/*
+ * MMU control handlers for processors lacking memory
+ * management hardware.
+ */
+#define enable_mmu()	do { } while (0)
+#define disable_mmu()	do { } while (0)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_MMU_CONTEXT_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/mmu_context_32.h b/src/kernel/linux/v4.14/arch/sh/include/asm/mmu_context_32.h
new file mode 100644
index 0000000..71bf12e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/mmu_context_32.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_MMU_CONTEXT_32_H
+#define __ASM_SH_MMU_CONTEXT_32_H
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	/* Do nothing */
+}
+
+#ifdef CONFIG_CPU_HAS_PTEAEX
+static inline void set_asid(unsigned long asid)
+{
+	__raw_writel(asid, MMU_PTEAEX);
+}
+
+static inline unsigned long get_asid(void)
+{
+	return __raw_readl(MMU_PTEAEX) & MMU_CONTEXT_ASID_MASK;
+}
+#else
+static inline void set_asid(unsigned long asid)
+{
+	unsigned long __dummy;
+
+	__asm__ __volatile__ ("mov.l	%2, %0\n\t"
+			      "and	%3, %0\n\t"
+			      "or	%1, %0\n\t"
+			      "mov.l	%0, %2"
+			      : "=&r" (__dummy)
+			      : "r" (asid), "m" (__m(MMU_PTEH)),
+			        "r" (0xffffff00));
+}
+
+static inline unsigned long get_asid(void)
+{
+	unsigned long asid;
+
+	__asm__ __volatile__ ("mov.l	%1, %0"
+			      : "=r" (asid)
+			      : "m" (__m(MMU_PTEH)));
+	asid &= MMU_CONTEXT_ASID_MASK;
+	return asid;
+}
+#endif /* CONFIG_CPU_HAS_PTEAEX */
+
+/* MMU_TTB is used for optimizing the fault handling. */
+static inline void set_TTB(pgd_t *pgd)
+{
+	__raw_writel((unsigned long)pgd, MMU_TTB);
+}
+
+static inline pgd_t *get_TTB(void)
+{
+	return (pgd_t *)__raw_readl(MMU_TTB);
+}
+#endif /* __ASM_SH_MMU_CONTEXT_32_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/mmu_context_64.h b/src/kernel/linux/v4.14/arch/sh/include/asm/mmu_context_64.h
new file mode 100644
index 0000000..de12102
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/mmu_context_64.h
@@ -0,0 +1,78 @@
+#ifndef __ASM_SH_MMU_CONTEXT_64_H
+#define __ASM_SH_MMU_CONTEXT_64_H
+
+/*
+ * sh64-specific mmu_context interface.
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003 - 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <cpu/registers.h>
+#include <asm/cacheflush.h>
+
+#define SR_ASID_MASK		0xffffffffff00ffffULL
+#define SR_ASID_SHIFT		16
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	/* Well, at least free TLB entries */
+	flush_tlb_mm(mm);
+}
+
+static inline unsigned long get_asid(void)
+{
+	unsigned long long sr;
+
+	asm volatile ("getcon   " __SR ", %0\n\t"
+		      : "=r" (sr));
+
+	sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK;
+	return (unsigned long) sr;
+}
+
+/* Set ASID into SR */
+static inline void set_asid(unsigned long asid)
+{
+	unsigned long long sr, pc;
+
+	asm volatile ("getcon	" __SR ", %0" : "=r" (sr));
+
+	sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT);
+
+	/*
+	 * It is possible that this function may be inlined and so to avoid
+	 * the assembler reporting duplicate symbols we make use of the
+	 * gas trick of generating symbols using numerics and forward
+	 * reference.
+	 */
+	asm volatile ("movi	1, %1\n\t"
+		      "shlli	%1, 28, %1\n\t"
+		      "or	%0, %1, %1\n\t"
+		      "putcon	%1, " __SR "\n\t"
+		      "putcon	%0, " __SSR "\n\t"
+		      "movi	1f, %1\n\t"
+		      "ori	%1, 1 , %1\n\t"
+		      "putcon	%1, " __SPC "\n\t"
+		      "rte\n"
+		      "1:\n\t"
+		      : "=r" (sr), "=r" (pc) : "0" (sr));
+}
+
+/* arch/sh/kernel/cpu/sh5/entry.S */
+extern unsigned long switch_and_save_asid(unsigned long new_asid);
+
+/* No spare register to twiddle, so use a software cache */
+extern pgd_t *mmu_pdtp_cache;
+
+#define set_TTB(pgd)	(mmu_pdtp_cache = (pgd))
+#define get_TTB()	(mmu_pdtp_cache)
+
+#endif /* __ASM_SH_MMU_CONTEXT_64_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/mmzone.h b/src/kernel/linux/v4.14/arch/sh/include/asm/mmzone.h
new file mode 100644
index 0000000..cbaee1d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/mmzone.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_MMZONE_H
+#define __ASM_SH_MMZONE_H
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+#include <linux/numa.h>
+
+extern struct pglist_data *node_data[];
+#define NODE_DATA(nid)		(node_data[nid])
+
+static inline int pfn_to_nid(unsigned long pfn)
+{
+	int nid;
+
+	for (nid = 0; nid < MAX_NUMNODES; nid++)
+		if (pfn >= node_start_pfn(nid) && pfn <= node_end_pfn(nid))
+			break;
+
+	return nid;
+}
+
+static inline struct pglist_data *pfn_to_pgdat(unsigned long pfn)
+{
+	return NODE_DATA(pfn_to_nid(pfn));
+}
+
+/* arch/sh/mm/numa.c */
+void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end);
+#else
+static inline void
+setup_bootmem_node(int nid, unsigned long start, unsigned long end)
+{
+}
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
+
+/* Platform specific mem init */
+void __init plat_mem_setup(void);
+
+/* arch/sh/kernel/setup.c */
+void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
+			       unsigned long end_pfn);
+/* arch/sh/mm/init.c */
+void __init allocate_pgdat(unsigned int nid);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_MMZONE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/module.h b/src/kernel/linux/v4.14/arch/sh/include/asm/module.h
new file mode 100644
index 0000000..9f38fb3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/module.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_SH_MODULE_H
+#define _ASM_SH_MODULE_H
+
+#include <asm-generic/module.h>
+
+#ifdef CONFIG_DWARF_UNWINDER
+struct mod_arch_specific {
+	struct list_head fde_list;
+	struct list_head cie_list;
+};
+#endif
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# ifdef CONFIG_CPU_SH2
+#  define MODULE_PROC_FAMILY "SH2LE "
+# elif defined  CONFIG_CPU_SH3
+#  define MODULE_PROC_FAMILY "SH3LE "
+# elif defined  CONFIG_CPU_SH4
+#  define MODULE_PROC_FAMILY "SH4LE "
+# elif defined  CONFIG_CPU_SH5
+#  define MODULE_PROC_FAMILY "SH5LE "
+# else
+#  error unknown processor family
+# endif
+#else
+# ifdef CONFIG_CPU_SH2
+#  define MODULE_PROC_FAMILY "SH2BE "
+# elif defined  CONFIG_CPU_SH3
+#  define MODULE_PROC_FAMILY "SH3BE "
+# elif defined  CONFIG_CPU_SH4
+#  define MODULE_PROC_FAMILY "SH4BE "
+# elif defined  CONFIG_CPU_SH5
+#  define MODULE_PROC_FAMILY "SH5BE "
+# else
+#  error unknown processor family
+# endif
+#endif
+
+#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+
+#endif /* _ASM_SH_MODULE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/page.h b/src/kernel/linux/v4.14/arch/sh/include/asm/page.h
new file mode 100644
index 0000000..5eef8be
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/page.h
@@ -0,0 +1,208 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_PAGE_H
+#define __ASM_SH_PAGE_H
+
+/*
+ * Copyright (C) 1999  Niibe Yutaka
+ */
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#if defined(CONFIG_PAGE_SIZE_4KB)
+# define PAGE_SHIFT	12
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+# define PAGE_SHIFT	13
+#elif defined(CONFIG_PAGE_SIZE_16KB)
+# define PAGE_SHIFT	14
+#elif defined(CONFIG_PAGE_SIZE_64KB)
+# define PAGE_SHIFT	16
+#else
+# error "Bogus kernel page size?"
+#endif
+
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+#define PTE_MASK	PAGE_MASK
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define HPAGE_SHIFT	16
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
+#define HPAGE_SHIFT	18
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#define HPAGE_SHIFT	20
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define HPAGE_SHIFT	22
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
+#define HPAGE_SHIFT	26
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
+#define HPAGE_SHIFT	29
+#endif
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE		(1UL << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE-1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT-PAGE_SHIFT)
+#endif
+
+#ifndef __ASSEMBLY__
+#include <asm/uncached.h>
+
+extern unsigned long shm_align_mask;
+extern unsigned long max_low_pfn, min_low_pfn;
+extern unsigned long memory_start, memory_end, memory_limit;
+
+static inline unsigned long
+pages_do_alias(unsigned long addr1, unsigned long addr2)
+{
+	return (addr1 ^ addr2) & shm_align_mask;
+}
+
+#define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
+extern void copy_page(void *to, void *from);
+#define copy_user_page(to, from, vaddr, pg)  __copy_user(to, from, PAGE_SIZE)
+
+struct page;
+struct vm_area_struct;
+
+extern void copy_user_highpage(struct page *to, struct page *from,
+			       unsigned long vaddr, struct vm_area_struct *vma);
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+extern void clear_user_highpage(struct page *page, unsigned long vaddr);
+#define clear_user_highpage	clear_user_highpage
+
+/*
+ * These are used to make use of C type-checking..
+ */
+#ifdef CONFIG_X2TLB
+typedef struct { unsigned long pte_low, pte_high; } pte_t;
+typedef struct { unsigned long long pgprot; } pgprot_t;
+typedef struct { unsigned long long pgd; } pgd_t;
+#define pte_val(x) \
+	((x).pte_low | ((unsigned long long)(x).pte_high << 32))
+#define __pte(x) \
+	({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
+#elif defined(CONFIG_SUPERH32)
+typedef struct { unsigned long pte_low; } pte_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#define pte_val(x)	((x).pte_low)
+#define __pte(x)	((pte_t) { (x) } )
+#else
+typedef struct { unsigned long long pte_low; } pte_t;
+typedef struct { unsigned long long pgprot; } pgprot_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#define pte_val(x)	((x).pte_low)
+#define __pte(x)	((pte_t) { (x) } )
+#endif
+
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+typedef struct page *pgtable_t;
+
+#define pte_pgprot(x) __pgprot(pte_val(x) & PTE_FLAGS_MASK)
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * __MEMORY_START and SIZE are the physical addresses and size of RAM.
+ */
+#define __MEMORY_START		CONFIG_MEMORY_START
+#define __MEMORY_SIZE		CONFIG_MEMORY_SIZE
+
+/*
+ * PHYSICAL_OFFSET is the offset in physical memory where the base
+ * of the kernel is loaded.
+ */
+#ifdef CONFIG_PHYSICAL_START
+#define PHYSICAL_OFFSET (CONFIG_PHYSICAL_START - __MEMORY_START)
+#else
+#define PHYSICAL_OFFSET 0
+#endif
+
+/*
+ * PAGE_OFFSET is the virtual address of the start of kernel address
+ * space.
+ */
+#define PAGE_OFFSET		CONFIG_PAGE_OFFSET
+
+/*
+ * Virtual to physical RAM address translation.
+ *
+ * In 29 bit mode, the physical offset of RAM from address 0 is visible in
+ * the kernel virtual address space, and thus we don't have to take
+ * this into account when translating. However in 32 bit mode this offset
+ * is not visible (it is part of the PMB mapping) and so needs to be
+ * added or subtracted as required.
+ */
+#ifdef CONFIG_PMB
+#define ___pa(x)	((x)-PAGE_OFFSET+__MEMORY_START)
+#define ___va(x)	((x)+PAGE_OFFSET-__MEMORY_START)
+#else
+#define ___pa(x)	((x)-PAGE_OFFSET)
+#define ___va(x)	((x)+PAGE_OFFSET)
+#endif
+
+#ifndef __ASSEMBLY__
+#define __pa(x)		___pa((unsigned long)x)
+#define __va(x)		(void *)___va((unsigned long)x)
+#endif /* !__ASSEMBLY__ */
+
+#ifdef CONFIG_UNCACHED_MAPPING
+#if defined(CONFIG_29BIT)
+#define UNCAC_ADDR(addr)	P2SEGADDR(addr)
+#define CAC_ADDR(addr)		P1SEGADDR(addr)
+#else
+#define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + uncached_start)
+#define CAC_ADDR(addr)		((addr) - uncached_start + PAGE_OFFSET)
+#endif
+#else
+#define UNCAC_ADDR(addr)	((addr))
+#define CAC_ADDR(addr)		((addr))
+#endif
+
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * PFN = physical frame number (ie PFN 0 == physical address 0)
+ * PFN_START is the PFN of the first page of RAM. By defining this we
+ * don't have struct page entries for the portion of address space
+ * between physical address 0 and the start of RAM.
+ */
+#define PFN_START		(__MEMORY_START >> PAGE_SHIFT)
+#define ARCH_PFN_OFFSET		(PFN_START)
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#ifdef CONFIG_FLATMEM
+#define pfn_valid(pfn)		((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
+#endif
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
+
+/*
+ * Some drivers need to perform DMA into kmalloc'ed buffers
+ * and so we have to increase the kmalloc minalign for this.
+ */
+#define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
+
+#ifdef CONFIG_SUPERH64
+/*
+ * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still
+ * happily generate {ld/st}.q pairs, requiring us to have 8-byte
+ * alignment to avoid traps. The kmalloc alignment is guaranteed by
+ * virtue of L1_CACHE_BYTES, requiring this to only be special cased
+ * for slab caches.
+ */
+#define ARCH_SLAB_MINALIGN	8
+#endif
+
+#endif /* __ASM_SH_PAGE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/pci.h b/src/kernel/linux/v4.14/arch/sh/include/asm/pci.h
new file mode 100644
index 0000000..53f7ae6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/pci.h
@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_PCI_H
+#define __ASM_SH_PCI_H
+
+#ifdef __KERNEL__
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+   already-configured bus numbers - to be used for buggy BIOSes
+   or architectures with incomplete PCI setup by the loader */
+
+#define pcibios_assign_all_busses()	1
+
+/*
+ * A board can define one or more PCI channels that represent built-in (or
+ * external) PCI controllers.
+ */
+struct pci_channel {
+	struct pci_channel	*next;
+	struct pci_bus		*bus;
+
+	struct pci_ops		*pci_ops;
+
+	struct resource		*resources;
+	unsigned int		nr_resources;
+
+	unsigned long		io_offset;
+	unsigned long		mem_offset;
+
+	unsigned long		reg_base;
+	unsigned long		io_map_base;
+
+	unsigned int		index;
+	unsigned int		need_domain_info;
+
+	/* Optional error handling */
+	struct timer_list	err_timer, serr_timer;
+	unsigned int		err_irq, serr_irq;
+};
+
+/* arch/sh/drivers/pci/pci.c */
+extern raw_spinlock_t pci_config_lock;
+
+extern int register_pci_controller(struct pci_channel *hose);
+extern void pcibios_report_status(unsigned int status_mask, int warn);
+
+/* arch/sh/drivers/pci/common.c */
+extern int early_read_config_byte(struct pci_channel *hose, int top_bus,
+				  int bus, int devfn, int offset, u8 *value);
+extern int early_read_config_word(struct pci_channel *hose, int top_bus,
+				  int bus, int devfn, int offset, u16 *value);
+extern int early_read_config_dword(struct pci_channel *hose, int top_bus,
+				   int bus, int devfn, int offset, u32 *value);
+extern int early_write_config_byte(struct pci_channel *hose, int top_bus,
+				   int bus, int devfn, int offset, u8 value);
+extern int early_write_config_word(struct pci_channel *hose, int top_bus,
+				   int bus, int devfn, int offset, u16 value);
+extern int early_write_config_dword(struct pci_channel *hose, int top_bus,
+				    int bus, int devfn, int offset, u32 value);
+extern void pcibios_enable_timers(struct pci_channel *hose);
+extern unsigned int pcibios_handle_status_errors(unsigned long addr,
+				 unsigned int status, struct pci_channel *hose);
+extern int pci_is_66mhz_capable(struct pci_channel *hose,
+				int top_bus, int current_bus);
+
+extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM;
+
+struct pci_dev;
+
+#define HAVE_PCI_MMAP
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+/* Dynamic DMA mapping stuff.
+ * SuperH has everything mapped statically like x86.
+ */
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(dma_ops->is_phys)
+
+#ifdef CONFIG_PCI
+/*
+ * None of the SH PCI controllers support MWI, it is always treated as a
+ * direct memory write.
+ */
+#define PCI_DISABLE_MWI
+#endif
+
+/* Board-specific fixup routines. */
+int pcibios_map_platform_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+#define pci_domain_nr(bus) ((struct pci_channel *)(bus)->sysdata)->index
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	struct pci_channel *hose = bus->sysdata;
+	return hose->need_domain_info;
+}
+
+/* Chances are this interrupt is wired PC-style ...  */
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return channel ? 15 : 14;
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_PCI_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/perf_event.h b/src/kernel/linux/v4.14/arch/sh/include/asm/perf_event.h
new file mode 100644
index 0000000..468c7ca
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/perf_event.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_PERF_EVENT_H
+#define __ASM_SH_PERF_EVENT_H
+
+struct hw_perf_event;
+
+#define MAX_HWEVENTS	2
+
+struct sh_pmu {
+	const char	*name;
+	unsigned int	num_events;
+	void		(*disable_all)(void);
+	void		(*enable_all)(void);
+	void		(*enable)(struct hw_perf_event *, int);
+	void		(*disable)(struct hw_perf_event *, int);
+	u64		(*read)(int);
+	int		(*event_map)(int);
+	unsigned int	max_events;
+	unsigned long	raw_event_mask;
+	const int	(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
+				       [PERF_COUNT_HW_CACHE_OP_MAX]
+				       [PERF_COUNT_HW_CACHE_RESULT_MAX];
+};
+
+/* arch/sh/kernel/perf_event.c */
+extern int register_sh_pmu(struct sh_pmu *);
+extern int reserve_pmc_hardware(void);
+extern void release_pmc_hardware(void);
+
+#endif /* __ASM_SH_PERF_EVENT_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/pgalloc.h b/src/kernel/linux/v4.14/arch/sh/include/asm/pgalloc.h
new file mode 100644
index 0000000..ed053a3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/pgalloc.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_PGALLOC_H
+#define __ASM_SH_PGALLOC_H
+
+#include <linux/quicklist.h>
+#include <asm/page.h>
+
+#define QUICK_PT 0	/* Other page table pages that are zero on free */
+
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
+
+#if PAGETABLE_LEVELS > 2
+extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
+extern pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address);
+extern void pmd_free(struct mm_struct *mm, pmd_t *pmd);
+#endif
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+				       pte_t *pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)pte));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+				pgtable_t pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * Allocate and free page tables.
+ */
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					  unsigned long address)
+{
+	return quicklist_alloc(QUICK_PT, GFP_KERNEL, NULL);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+					unsigned long address)
+{
+	struct page *page;
+	void *pg;
+
+	pg = quicklist_alloc(QUICK_PT, GFP_KERNEL, NULL);
+	if (!pg)
+		return NULL;
+	page = virt_to_page(pg);
+	if (!pgtable_page_ctor(page)) {
+		quicklist_free(QUICK_PT, NULL, pg);
+		return NULL;
+	}
+	return page;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	quicklist_free(QUICK_PT, NULL, pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	quicklist_free_page(QUICK_PT, NULL, pte);
+}
+
+#define __pte_free_tlb(tlb,pte,addr)			\
+do {							\
+	pgtable_page_dtor(pte);				\
+	tlb_remove_page((tlb), (pte));			\
+} while (0)
+
+static inline void check_pgt_cache(void)
+{
+	quicklist_trim(QUICK_PT, NULL, 25, 16);
+}
+
+#endif /* __ASM_SH_PGALLOC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/pgtable-2level.h b/src/kernel/linux/v4.14/arch/sh/include/asm/pgtable-2level.h
new file mode 100644
index 0000000..bf1eb51
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/pgtable-2level.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_PGTABLE_2LEVEL_H
+#define __ASM_SH_PGTABLE_2LEVEL_H
+
+#define __ARCH_USE_5LEVEL_HACK
+#include <asm-generic/pgtable-nopmd.h>
+
+/*
+ * traditional two-level paging structure
+ */
+#define PAGETABLE_LEVELS	2
+
+/* PTE bits */
+#define PTE_MAGNITUDE		2	/* 32-bit PTEs */
+
+#define PTE_SHIFT		PAGE_SHIFT
+#define PTE_BITS		(PTE_SHIFT - PTE_MAGNITUDE)
+
+/* PGD bits */
+#define PGDIR_SHIFT		(PTE_SHIFT + PTE_BITS)
+
+#define PTRS_PER_PGD		(PAGE_SIZE / (1 << PTE_MAGNITUDE))
+#define USER_PTRS_PER_PGD	(TASK_SIZE/PGDIR_SIZE)
+
+#endif /* __ASM_SH_PGTABLE_2LEVEL_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/pgtable-3level.h b/src/kernel/linux/v4.14/arch/sh/include/asm/pgtable-3level.h
new file mode 100644
index 0000000..7d8587e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/pgtable-3level.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_PGTABLE_3LEVEL_H
+#define __ASM_SH_PGTABLE_3LEVEL_H
+
+#define __ARCH_USE_5LEVEL_HACK
+#include <asm-generic/pgtable-nopud.h>
+
+/*
+ * Some cores need a 3-level page table layout, for example when using
+ * 64-bit PTEs and 4K pages.
+ */
+#define PAGETABLE_LEVELS	3
+
+#define PTE_MAGNITUDE		3	/* 64-bit PTEs on SH-X2 TLB */
+
+/* PGD bits */
+#define PGDIR_SHIFT		30
+
+#define PTRS_PER_PGD		4
+#define USER_PTRS_PER_PGD	2
+
+/* PMD bits */
+#define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT - PTE_MAGNITUDE))
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+#define PTRS_PER_PMD	((1 << PGDIR_SHIFT) / PMD_SIZE)
+
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %016llx.\n", __FILE__, __LINE__, pmd_val(e))
+
+typedef struct { unsigned long long pmd; } pmd_t;
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x)	((pmd_t) { (x) } )
+
+static inline unsigned long pud_page_vaddr(pud_t pud)
+{
+	return pud_val(pud);
+}
+
+#define pmd_index(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
+{
+	return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
+}
+
+#define pud_none(x)	(!pud_val(x))
+#define pud_present(x)	(pud_val(x))
+#define pud_clear(xp)	do { set_pud(xp, __pud(0)); } while (0)
+#define	pud_bad(x)	(pud_val(x) & ~PAGE_MASK)
+
+/*
+ * (puds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pud(pudptr, pudval) do { *(pudptr) = (pudval); } while(0)
+
+#endif /* __ASM_SH_PGTABLE_3LEVEL_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/pgtable.h b/src/kernel/linux/v4.14/arch/sh/include/asm/pgtable.h
new file mode 100644
index 0000000..89c513a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/pgtable.h
@@ -0,0 +1,163 @@
+/*
+ * This file contains the functions and defines necessary to modify and
+ * use the SuperH page table tree.
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2002 - 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of this
+ * archive for more details.
+ */
+#ifndef __ASM_SH_PGTABLE_H
+#define __ASM_SH_PGTABLE_H
+
+#ifdef CONFIG_X2TLB
+#include <asm/pgtable-3level.h>
+#else
+#include <asm/pgtable-2level.h>
+#endif
+#include <asm/page.h>
+#include <asm/mmu.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/addrspace.h>
+#include <asm/fixmap.h>
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Effective and physical address definitions, to aid with sign
+ * extension.
+ */
+#define NEFF		32
+#define	NEFF_SIGN	(1LL << (NEFF - 1))
+#define	NEFF_MASK	(-1LL << NEFF)
+
+static inline unsigned long long neff_sign_extend(unsigned long val)
+{
+	unsigned long long extended = val;
+	return (extended & NEFF_SIGN) ? (extended | NEFF_MASK) : extended;
+}
+
+#ifdef CONFIG_29BIT
+#define NPHYS		29
+#else
+#define NPHYS		32
+#endif
+
+#define	NPHYS_SIGN	(1LL << (NPHYS - 1))
+#define	NPHYS_MASK	(-1LL << NPHYS)
+
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/* Entries per level */
+#define PTRS_PER_PTE	(PAGE_SIZE / (1 << PTE_MAGNITUDE))
+
+#define FIRST_USER_ADDRESS	0UL
+
+#define PHYS_ADDR_MASK29		0x1fffffff
+#define PHYS_ADDR_MASK32		0xffffffff
+
+static inline unsigned long phys_addr_mask(void)
+{
+	/* Is the MMU in 29bit mode? */
+	if (__in_29bit_mode())
+		return PHYS_ADDR_MASK29;
+
+	return PHYS_ADDR_MASK32;
+}
+
+#define PTE_PHYS_MASK		(phys_addr_mask() & PAGE_MASK)
+#define PTE_FLAGS_MASK		(~(PTE_PHYS_MASK) << PAGE_SHIFT)
+
+#ifdef CONFIG_SUPERH32
+#define VMALLOC_START	(P3SEG)
+#else
+#define VMALLOC_START	(0xf0000000)
+#endif
+#define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
+
+#if defined(CONFIG_SUPERH32)
+#include <asm/pgtable_32.h>
+#else
+#include <asm/pgtable_64.h>
+#endif
+
+/*
+ * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page
+ * protection for execute, and considers it the same as a read. Also, write
+ * permission implies read permission. This is the closest we can get..
+ *
+ * SH-X2 (SH7785) and later parts take this to the opposite end of the extreme,
+ * not only supporting separate execute, read, and write bits, but having
+ * completely separate permission bits for user and kernel space.
+ */
+	 /*xwr*/
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_EXECREAD
+#define __P101	PAGE_EXECREAD
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_WRITEONLY
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_EXECREAD
+#define __S101	PAGE_EXECREAD
+#define __S110	PAGE_RWX
+#define __S111	PAGE_RWX
+
+typedef pte_t *pte_addr_t;
+
+#define kern_addr_valid(addr)	(1)
+
+#define pte_pfn(x)		((unsigned long)(((x).pte_low >> PAGE_SHIFT)))
+
+/*
+ * Initialise the page table caches
+ */
+extern void pgtable_cache_init(void);
+
+struct vm_area_struct;
+struct mm_struct;
+
+extern void __update_cache(struct vm_area_struct *vma,
+			   unsigned long address, pte_t pte);
+extern void __update_tlb(struct vm_area_struct *vma,
+			 unsigned long address, pte_t pte);
+
+static inline void
+update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
+{
+	pte_t pte = *ptep;
+	__update_cache(vma, address, pte);
+	__update_tlb(vma, address, pte);
+}
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern void paging_init(void);
+extern void page_table_range_init(unsigned long start, unsigned long end,
+				  pgd_t *pgd);
+
+/* arch/sh/mm/mmap.c */
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+
+#define __HAVE_ARCH_PTE_SPECIAL
+
+#include <asm-generic/pgtable.h>
+
+#endif /* __ASM_SH_PGTABLE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/pgtable_32.h b/src/kernel/linux/v4.14/arch/sh/include/asm/pgtable_32.h
new file mode 100644
index 0000000..29274f0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/pgtable_32.h
@@ -0,0 +1,477 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_PGTABLE_32_H
+#define __ASM_SH_PGTABLE_32_H
+
+/*
+ * Linux PTEL encoding.
+ *
+ * Hardware and software bit definitions for the PTEL value (see below for
+ * notes on SH-X2 MMUs and 64-bit PTEs):
+ *
+ * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4).
+ *
+ * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the
+ *   hardware PTEL value can't have the SH-bit set when MMUCR.IX is set,
+ *   which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT).
+ *
+ *   In order to keep this relatively clean, do not use these for defining
+ *   SH-3 specific flags until all of the other unused bits have been
+ *   exhausted.
+ *
+ * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE.
+ *
+ * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages.
+ *   Bit 10 is used for _PAGE_ACCESSED, and bit 11 is used for _PAGE_SPECIAL.
+ *
+ * - On 29 bit platforms, bits 31 to 29 are used for the space attributes
+ *   and timing control which (together with bit 0) are moved into the
+ *   old-style PTEA on the parts that support it.
+ *
+ * SH-X2 MMUs and extended PTEs
+ *
+ * SH-X2 supports an extended mode TLB with split data arrays due to the
+ * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and
+ * SZ bit placeholders still exist in data array 1, but are implemented as
+ * reserved bits, with the real logic existing in data array 2.
+ *
+ * The downside to this is that we can no longer fit everything in to a 32-bit
+ * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus
+ * side, this gives us quite a few spare bits to play with for future usage.
+ */
+/* Legacy and compat mode bits */
+#define	_PAGE_WT	0x001		/* WT-bit on SH-4, 0 on SH-3 */
+#define _PAGE_HW_SHARED	0x002		/* SH-bit  : shared among processes */
+#define _PAGE_DIRTY	0x004		/* D-bit   : page changed */
+#define _PAGE_CACHABLE	0x008		/* C-bit   : cachable */
+#define _PAGE_SZ0	0x010		/* SZ0-bit : Size of page */
+#define _PAGE_RW	0x020		/* PR0-bit : write access allowed */
+#define _PAGE_USER	0x040		/* PR1-bit : user space access allowed*/
+#define _PAGE_SZ1	0x080		/* SZ1-bit : Size of page (on SH-4) */
+#define _PAGE_PRESENT	0x100		/* V-bit   : page is valid */
+#define _PAGE_PROTNONE	0x200		/* software: if not present  */
+#define _PAGE_ACCESSED	0x400		/* software: page referenced */
+#define _PAGE_SPECIAL	0x800		/* software: special page */
+
+#define _PAGE_SZ_MASK	(_PAGE_SZ0 | _PAGE_SZ1)
+#define _PAGE_PR_MASK	(_PAGE_RW | _PAGE_USER)
+
+/* Extended mode bits */
+#define _PAGE_EXT_ESZ0		0x0010	/* ESZ0-bit: Size of page */
+#define _PAGE_EXT_ESZ1		0x0020	/* ESZ1-bit: Size of page */
+#define _PAGE_EXT_ESZ2		0x0040	/* ESZ2-bit: Size of page */
+#define _PAGE_EXT_ESZ3		0x0080	/* ESZ3-bit: Size of page */
+
+#define _PAGE_EXT_USER_EXEC	0x0100	/* EPR0-bit: User space executable */
+#define _PAGE_EXT_USER_WRITE	0x0200	/* EPR1-bit: User space writable */
+#define _PAGE_EXT_USER_READ	0x0400	/* EPR2-bit: User space readable */
+
+#define _PAGE_EXT_KERN_EXEC	0x0800	/* EPR3-bit: Kernel space executable */
+#define _PAGE_EXT_KERN_WRITE	0x1000	/* EPR4-bit: Kernel space writable */
+#define _PAGE_EXT_KERN_READ	0x2000	/* EPR5-bit: Kernel space readable */
+
+#define _PAGE_EXT_WIRED		0x4000	/* software: Wire TLB entry */
+
+/* Wrapper for extended mode pgprot twiddling */
+#define _PAGE_EXT(x)		((unsigned long long)(x) << 32)
+
+#ifdef CONFIG_X2TLB
+#define _PAGE_PCC_MASK	0x00000000	/* No legacy PTEA support */
+#else
+
+/* software: moves to PTEA.TC (Timing Control) */
+#define _PAGE_PCC_AREA5	0x00000000	/* use BSC registers for area5 */
+#define _PAGE_PCC_AREA6	0x80000000	/* use BSC registers for area6 */
+
+/* software: moves to PTEA.SA[2:0] (Space Attributes) */
+#define _PAGE_PCC_IODYN 0x00000001	/* IO space, dynamically sized bus */
+#define _PAGE_PCC_IO8	0x20000000	/* IO space, 8 bit bus */
+#define _PAGE_PCC_IO16	0x20000001	/* IO space, 16 bit bus */
+#define _PAGE_PCC_COM8	0x40000000	/* Common Memory space, 8 bit bus */
+#define _PAGE_PCC_COM16	0x40000001	/* Common Memory space, 16 bit bus */
+#define _PAGE_PCC_ATR8	0x60000000	/* Attribute Memory space, 8 bit bus */
+#define _PAGE_PCC_ATR16	0x60000001	/* Attribute Memory space, 6 bit bus */
+
+#define _PAGE_PCC_MASK	0xe0000001
+
+/* copy the ptea attributes */
+static inline unsigned long copy_ptea_attributes(unsigned long x)
+{
+	return	((x >> 28) & 0xe) | (x & 0x1);
+}
+#endif
+
+/* Mask which drops unused bits from the PTEL value */
+#if defined(CONFIG_CPU_SH3)
+#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED| \
+				  _PAGE_SZ1	| _PAGE_HW_SHARED)
+#elif defined(CONFIG_X2TLB)
+/* Get rid of the legacy PR/SZ bits when using extended mode */
+#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED | \
+				 _PAGE_PR_MASK | _PAGE_SZ_MASK)
+#else
+#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#endif
+
+#define _PAGE_FLAGS_HARDWARE_MASK	(phys_addr_mask() & ~(_PAGE_CLEAR_FLAGS))
+
+/* Hardware flags, page size encoding */
+#if !defined(CONFIG_MMU)
+# define _PAGE_FLAGS_HARD	0ULL
+#elif defined(CONFIG_X2TLB)
+# if defined(CONFIG_PAGE_SIZE_4KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ0)
+# elif defined(CONFIG_PAGE_SIZE_8KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ1)
+# elif defined(CONFIG_PAGE_SIZE_64KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ2)
+# endif
+#else
+# if defined(CONFIG_PAGE_SIZE_4KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_SZ0
+# elif defined(CONFIG_PAGE_SIZE_64KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_SZ1
+# endif
+#endif
+
+#if defined(CONFIG_X2TLB)
+# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ3)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3)
+# endif
+# define _PAGE_WIRED	(_PAGE_EXT(_PAGE_EXT_WIRED))
+#else
+# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#  define _PAGE_SZHUGE	(_PAGE_SZ1)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#  define _PAGE_SZHUGE	(_PAGE_SZ0 | _PAGE_SZ1)
+# endif
+# define _PAGE_WIRED	(0)
+#endif
+
+/*
+ * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
+ * to make pte_mkhuge() happy.
+ */
+#ifndef _PAGE_SZHUGE
+# define _PAGE_SZHUGE	(_PAGE_FLAGS_HARD)
+#endif
+
+/*
+ * Mask of bits that are to be preserved across pgprot changes.
+ */
+#define _PAGE_CHG_MASK \
+	(PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | \
+	 _PAGE_DIRTY | _PAGE_SPECIAL)
+
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_X2TLB) /* SH-X2 TLB */
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ  | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_USER_READ  | \
+					   _PAGE_EXT_USER_WRITE))
+
+#define PAGE_EXECREAD	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \
+					   _PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_USER_EXEC | \
+					   _PAGE_EXT_USER_READ))
+
+#define PAGE_COPY	PAGE_EXECREAD
+
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_USER_READ))
+
+#define PAGE_WRITEONLY	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_USER_WRITE))
+
+#define PAGE_RWX	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_READ  | \
+					   _PAGE_EXT_KERN_EXEC  | \
+					   _PAGE_EXT_USER_WRITE | \
+					   _PAGE_EXT_USER_READ  | \
+					   _PAGE_EXT_USER_EXEC))
+
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_NOCACHE \
+			__pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
+				 _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_PCC(slot, type) \
+			__pgprot(0)
+
+#elif defined(CONFIG_MMU) /* SH-X TLB */
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
+				 _PAGE_CACHABLE | _PAGE_ACCESSED | \
+				 _PAGE_FLAGS_HARD)
+
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_EXECREAD	PAGE_READONLY
+#define PAGE_RWX	PAGE_SHARED
+#define PAGE_WRITEONLY	PAGE_SHARED
+
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_NOCACHE \
+			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
+				 _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_PCC(slot, type) \
+			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
+				 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
+				 (type))
+#else /* no mmu */
+#define PAGE_NONE		__pgprot(0)
+#define PAGE_SHARED		__pgprot(0)
+#define PAGE_COPY		__pgprot(0)
+#define PAGE_EXECREAD		__pgprot(0)
+#define PAGE_RWX		__pgprot(0)
+#define PAGE_READONLY		__pgprot(0)
+#define PAGE_WRITEONLY		__pgprot(0)
+#define PAGE_KERNEL		__pgprot(0)
+#define PAGE_KERNEL_NOCACHE	__pgprot(0)
+#define PAGE_KERNEL_RO		__pgprot(0)
+
+#define PAGE_KERNEL_PCC(slot, type) \
+				__pgprot(0)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#ifdef CONFIG_X2TLB
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+	ptep->pte_high = pte.pte_high;
+	smp_wmb();
+	ptep->pte_low = pte.pte_low;
+}
+#else
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#endif
+
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+#define pfn_pte(pfn, prot) \
+	__pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot) \
+	__pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define pte_none(x)		(!pte_val(x))
+#define pte_present(x)		((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
+
+#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+
+#define pmd_none(x)	(!pmd_val(x))
+#define pmd_present(x)	(pmd_val(x))
+#define pmd_clear(xp)	do { set_pmd(xp, __pmd(0)); } while (0)
+#define	pmd_bad(x)	(pmd_val(x) & ~PAGE_MASK)
+
+#define pages_to_mb(x)	((x) >> (20-PAGE_SHIFT))
+#define pte_page(x)	pfn_to_page(pte_pfn(x))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#define pte_not_present(pte)	(!((pte).pte_low & _PAGE_PRESENT))
+#define pte_dirty(pte)		((pte).pte_low & _PAGE_DIRTY)
+#define pte_young(pte)		((pte).pte_low & _PAGE_ACCESSED)
+#define pte_special(pte)	((pte).pte_low & _PAGE_SPECIAL)
+
+#ifdef CONFIG_X2TLB
+#define pte_write(pte) \
+	((pte).pte_high & (_PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE))
+#else
+#define pte_write(pte)		((pte).pte_low & _PAGE_RW)
+#endif
+
+#define PTE_BIT_FUNC(h,fn,op) \
+static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; }
+
+#ifdef CONFIG_X2TLB
+/*
+ * We cheat a bit in the SH-X2 TLB case. As the permission bits are
+ * individually toggled (and user permissions are entirely decoupled from
+ * kernel permissions), we attempt to couple them a bit more sanely here.
+ */
+PTE_BIT_FUNC(high, wrprotect, &= ~(_PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE));
+PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE);
+PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE);
+#else
+PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW);
+PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW);
+PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE);
+#endif
+
+PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY);
+PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY);
+PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED);
+PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED);
+PTE_BIT_FUNC(low, mkspecial, |= _PAGE_SPECIAL);
+
+/*
+ * Macro and implementation to make a page protection as uncachable.
+ */
+#define pgprot_writecombine(prot) \
+	__pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
+
+#define pgprot_noncached	 pgprot_writecombine
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte.pte_low &= _PAGE_CHG_MASK;
+	pte.pte_low |= pgprot_val(newprot);
+
+#ifdef CONFIG_X2TLB
+	pte.pte_high |= pgprot_val(newprot) >> 32;
+#endif
+
+	return pte;
+}
+
+#define pmd_page_vaddr(pmd)	((unsigned long)pmd_val(pmd))
+#define pmd_page(pmd)		(virt_to_page(pmd_val(pmd)))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
+#define __pgd_offset(address)	pgd_index(address)
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
+
+#define __pud_offset(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define __pmd_offset(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)	((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define __pte_offset(address)	pte_index(address)
+
+#define pte_offset_kernel(dir, address) \
+	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
+#define pte_offset_map(dir, address)		pte_offset_kernel(dir, address)
+#define pte_unmap(pte)		do { } while (0)
+
+#ifdef CONFIG_X2TLB
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \
+	       &(e), (e).pte_high, (e).pte_low)
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e))
+#else
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+#endif
+
+/*
+ * Encode and de-code a swap entry
+ *
+ * Constraints:
+ *	_PAGE_PRESENT at bit 8
+ *	_PAGE_PROTNONE at bit 9
+ *
+ * For the normal case, we encode the swap type into bits 0:7 and the
+ * swap offset into bits 10:30. For the 64-bit PTE case, we keep the
+ * preserved bits in the low 32-bits and use the upper 32 as the swap
+ * offset (along with a 5-bit type), following the same approach as x86
+ * PAE. This keeps the logic quite simple.
+ *
+ * As is evident by the Alpha code, if we ever get a 64-bit unsigned
+ * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes
+ * much cleaner..
+ *
+ * NOTE: We should set ZEROs at the position of _PAGE_PRESENT
+ *       and _PAGE_PROTNONE bits
+ */
+#ifdef CONFIG_X2TLB
+#define __swp_type(x)			((x).val & 0x1f)
+#define __swp_offset(x)			((x).val >> 5)
+#define __swp_entry(type, offset)	((swp_entry_t){ (type) | (offset) << 5})
+#define __pte_to_swp_entry(pte)		((swp_entry_t){ (pte).pte_high })
+#define __swp_entry_to_pte(x)		((pte_t){ 0, (x).val })
+
+#else
+#define __swp_type(x)			((x).val & 0xff)
+#define __swp_offset(x)			((x).val >> 10)
+#define __swp_entry(type, offset)	((swp_entry_t){(type) | (offset) <<10})
+
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) >> 1 })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val << 1 })
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_PGTABLE_32_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/pgtable_64.h b/src/kernel/linux/v4.14/arch/sh/include/asm/pgtable_64.h
new file mode 100644
index 0000000..0742496
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/pgtable_64.h
@@ -0,0 +1,310 @@
+#ifndef __ASM_SH_PGTABLE_64_H
+#define __ASM_SH_PGTABLE_64_H
+
+/*
+ * include/asm-sh/pgtable_64.h
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the SuperH page table tree.
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ * Copyright (C) 2003, 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+
+/*
+ * Error outputs.
+ */
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Table setting routines. Used within arch/mm only.
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+static __inline__ void set_pte(pte_t *pteptr, pte_t pteval)
+{
+	unsigned long long x = ((unsigned long long) pteval.pte_low);
+	unsigned long long *xp = (unsigned long long *) pteptr;
+	/*
+	 * Sign-extend based on NPHYS.
+	 */
+	*(xp) = (x & NPHYS_SIGN) ? (x | NPHYS_MASK) : x;
+}
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * PGD defines. Top level.
+ */
+
+/* To find an entry in a generic PGD. */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define __pgd_offset(address) pgd_index(address)
+#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+
+/* To find an entry in a kernel PGD. */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+#define __pud_offset(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define __pmd_offset(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+/*
+ * PMD level access routines. Same notes as above.
+ */
+#define _PMD_EMPTY		0x0
+/* Either the PMD is empty or present, it's not paged out */
+#define pmd_present(pmd_entry)	(pmd_val(pmd_entry) & _PAGE_PRESENT)
+#define pmd_clear(pmd_entry_p)	(set_pmd((pmd_entry_p), __pmd(_PMD_EMPTY)))
+#define pmd_none(pmd_entry)	(pmd_val((pmd_entry)) == _PMD_EMPTY)
+#define pmd_bad(pmd_entry)	((pmd_val(pmd_entry) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+
+#define pmd_page_vaddr(pmd_entry) \
+	((unsigned long) __va(pmd_val(pmd_entry) & PAGE_MASK))
+
+#define pmd_page(pmd) \
+	(virt_to_page(pmd_val(pmd)))
+
+/* PMD to PTE dereferencing */
+#define pte_index(address) \
+		((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+#define __pte_offset(address)	pte_index(address)
+
+#define pte_offset_kernel(dir, addr) \
+		((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr)))
+
+#define pte_offset_map(dir,addr)	pte_offset_kernel(dir, addr)
+#define pte_unmap(pte)		do { } while (0)
+
+#ifndef __ASSEMBLY__
+/*
+ * PTEL coherent flags.
+ * See Chapter 17 ST50 CPU Core Volume 1, Architecture.
+ */
+/* The bits that are required in the SH-5 TLB are placed in the h/w-defined
+   positions, to avoid expensive bit shuffling on every refill.  The remaining
+   bits are used for s/w purposes and masked out on each refill.
+
+   Note, the PTE slots are used to hold data of type swp_entry_t when a page is
+   swapped out.  Only the _PAGE_PRESENT flag is significant when the page is
+   swapped out, and it must be placed so that it doesn't overlap either the
+   type or offset fields of swp_entry_t.  For x86, offset is at [31:8] and type
+   at [6:1], with _PAGE_PRESENT at bit 0 for both pte_t and swp_entry_t.  This
+   scheme doesn't map to SH-5 because bit [0] controls cacheability.  So bit
+   [2] is used for _PAGE_PRESENT and the type field of swp_entry_t is split
+   into 2 pieces.  That is handled by SWP_ENTRY and SWP_TYPE below. */
+#define _PAGE_WT	0x001  /* CB0: if cacheable, 1->write-thru, 0->write-back */
+#define _PAGE_DEVICE	0x001  /* CB0: if uncacheable, 1->device (i.e. no write-combining or reordering at bus level) */
+#define _PAGE_CACHABLE	0x002  /* CB1: uncachable/cachable */
+#define _PAGE_PRESENT	0x004  /* software: page referenced */
+#define _PAGE_SIZE0	0x008  /* SZ0-bit : size of page */
+#define _PAGE_SIZE1	0x010  /* SZ1-bit : size of page */
+#define _PAGE_SHARED	0x020  /* software: reflects PTEH's SH */
+#define _PAGE_READ	0x040  /* PR0-bit : read access allowed */
+#define _PAGE_EXECUTE	0x080  /* PR1-bit : execute access allowed */
+#define _PAGE_WRITE	0x100  /* PR2-bit : write access allowed */
+#define _PAGE_USER	0x200  /* PR3-bit : user space access allowed */
+#define _PAGE_DIRTY	0x400  /* software: page accessed in write */
+#define _PAGE_ACCESSED	0x800  /* software: page referenced */
+
+/* Wrapper for extended mode pgprot twiddling */
+#define _PAGE_EXT(x)		((unsigned long long)(x) << 32)
+
+/*
+ * We can use the sign-extended bits in the PTEL to get 32 bits of
+ * software flags. This works for now because no implementations uses
+ * anything above the PPN field.
+ */
+#define _PAGE_WIRED	_PAGE_EXT(0x001) /* software: wire the tlb entry */
+#define _PAGE_SPECIAL	_PAGE_EXT(0x002)
+
+#define _PAGE_CLEAR_FLAGS	(_PAGE_PRESENT | _PAGE_SHARED | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_WIRED)
+
+/* Mask which drops software flags */
+#define _PAGE_FLAGS_HARDWARE_MASK	(NEFF_MASK & ~(_PAGE_CLEAR_FLAGS))
+
+/*
+ * HugeTLB support
+ */
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define _PAGE_SZHUGE	(_PAGE_SIZE0)
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#define _PAGE_SZHUGE	(_PAGE_SIZE1)
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
+#define _PAGE_SZHUGE	(_PAGE_SIZE0 | _PAGE_SIZE1)
+#endif
+
+/*
+ * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
+ * to make pte_mkhuge() happy.
+ */
+#ifndef _PAGE_SZHUGE
+# define _PAGE_SZHUGE	(0)
+#endif
+
+/*
+ * Default flags for a Kernel page.
+ * This is fundametally also SHARED because the main use of this define
+ * (other than for PGD/PMD entries) is for the VMALLOC pool which is
+ * contextless.
+ *
+ * _PAGE_EXECUTE is required for modules
+ *
+ */
+#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+			 _PAGE_EXECUTE | \
+			 _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_DIRTY | \
+			 _PAGE_SHARED)
+
+/* Default flags for a User page */
+#define _PAGE_TABLE	(_KERNPG_TABLE | _PAGE_USER)
+
+#define _PAGE_CHG_MASK	(PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
+			 _PAGE_SPECIAL)
+
+/*
+ * We have full permissions (Read/Write/Execute/Shared).
+ */
+#define _PAGE_COMMON	(_PAGE_PRESENT | _PAGE_USER | \
+			 _PAGE_CACHABLE | _PAGE_ACCESSED)
+
+#define PAGE_NONE	__pgprot(_PAGE_CACHABLE | _PAGE_ACCESSED)
+#define PAGE_SHARED	__pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_WRITE | \
+				 _PAGE_SHARED)
+#define PAGE_EXECREAD	__pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_EXECUTE)
+
+/*
+ * We need to include PAGE_EXECUTE in PAGE_COPY because it is the default
+ * protection mode for the stack.
+ */
+#define PAGE_COPY	PAGE_EXECREAD
+
+#define PAGE_READONLY	__pgprot(_PAGE_COMMON | _PAGE_READ)
+#define PAGE_WRITEONLY	__pgprot(_PAGE_COMMON | _PAGE_WRITE)
+#define PAGE_RWX	__pgprot(_PAGE_COMMON | _PAGE_READ | \
+				 _PAGE_WRITE | _PAGE_EXECUTE)
+#define PAGE_KERNEL	__pgprot(_KERNPG_TABLE)
+
+#define PAGE_KERNEL_NOCACHE \
+			__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+				 _PAGE_EXECUTE | _PAGE_ACCESSED | \
+				 _PAGE_DIRTY | _PAGE_SHARED)
+
+/* Make it a device mapping for maximum safety (e.g. for mapping device
+   registers into user-space via /dev/map).  */
+#define pgprot_noncached(x) __pgprot(((x).pgprot & ~(_PAGE_CACHABLE)) | _PAGE_DEVICE)
+#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
+
+/*
+ * PTE level access routines.
+ *
+ * Note1:
+ * It's the tree walk leaf. This is physical address to be stored.
+ *
+ * Note 2:
+ * Regarding the choice of _PTE_EMPTY:
+
+   We must choose a bit pattern that cannot be valid, whether or not the page
+   is present.  bit[2]==1 => present, bit[2]==0 => swapped out.  If swapped
+   out, bits [31:8], [6:3], [1:0] are under swapper control, so only bit[7] is
+   left for us to select.  If we force bit[7]==0 when swapped out, we could use
+   the combination bit[7,2]=2'b10 to indicate an empty PTE.  Alternatively, if
+   we force bit[7]==1 when swapped out, we can use all zeroes to indicate
+   empty.  This is convenient, because the page tables get cleared to zero
+   when they are allocated.
+
+ */
+#define _PTE_EMPTY	0x0
+#define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,xp)	(set_pte_at(mm, addr, xp, __pte(_PTE_EMPTY)))
+#define pte_none(x)	(pte_val(x) == _PTE_EMPTY)
+
+/*
+ * Some definitions to translate between mem_map, PTEs, and page
+ * addresses:
+ */
+
+/*
+ * Given a PTE, return the index of the mem_map[] entry corresponding
+ * to the page frame the PTE. Get the absolute physical address, make
+ * a relative physical address and translate it to an index.
+ */
+#define pte_pagenr(x)		(((unsigned long) (pte_val(x)) - \
+				 __MEMORY_START) >> PAGE_SHIFT)
+
+/*
+ * Given a PTE, return the "struct page *".
+ */
+#define pte_page(x)		(mem_map + pte_pagenr(x))
+
+/*
+ * Return number of (down rounded) MB corresponding to x pages.
+ */
+#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
+
+
+/*
+ * The following have defined behavior only work if pte_present() is true.
+ */
+static inline int pte_dirty(pte_t pte)  { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)  { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_write(pte_t pte)  { return pte_val(pte) & _PAGE_WRITE; }
+static inline int pte_special(pte_t pte){ return pte_val(pte) & _PAGE_SPECIAL; }
+
+static inline pte_t pte_wrprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_WRITE)); return pte; }
+static inline pte_t pte_mkclean(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; }
+static inline pte_t pte_mkold(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; }
+static inline pte_t pte_mkwrite(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_WRITE)); return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; }
+static inline pte_t pte_mkhuge(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_SZHUGE)); return pte; }
+static inline pte_t pte_mkspecial(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_SPECIAL)); return pte; }
+
+/*
+ * Conversion functions: convert a page and protection to a page entry.
+ *
+ * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
+ */
+#define mk_pte(page,pgprot)							\
+({										\
+	pte_t __pte;								\
+										\
+	set_pte(&__pte, __pte((((page)-mem_map) << PAGE_SHIFT) | 		\
+		__MEMORY_START | pgprot_val((pgprot))));			\
+	__pte;									\
+})
+
+/*
+ * This takes a (absolute) physical page address that is used
+ * by the remapping functions
+ */
+#define mk_pte_phys(physpage, pgprot) \
+({ pte_t __pte; set_pte(&__pte, __pte(physpage | pgprot_val(pgprot))); __pte; })
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; }
+
+/* Encode and decode a swap entry */
+#define __swp_type(x)			(((x).val & 3) + (((x).val >> 1) & 0x3c))
+#define __swp_offset(x)			((x).val >> 8)
+#define __swp_entry(type, offset)	((swp_entry_t) { ((offset << 8) + ((type & 0x3c) << 1) + (type & 3)) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+#endif /* !__ASSEMBLY__ */
+
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#endif /* __ASM_SH_PGTABLE_64_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/posix_types.h b/src/kernel/linux/v4.14/arch/sh/include/asm/posix_types.h
new file mode 100644
index 0000000..0d670fd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/posix_types.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+# ifdef CONFIG_SUPERH32
+#  include <asm/posix_types_32.h>
+# else
+#  include <asm/posix_types_64.h>
+# endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/processor.h b/src/kernel/linux/v4.14/arch/sh/include/asm/processor.h
new file mode 100644
index 0000000..6fbf8c8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/processor.h
@@ -0,0 +1,184 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_PROCESSOR_H
+#define __ASM_SH_PROCESSOR_H
+
+#include <asm/cpu-features.h>
+#include <asm/segment.h>
+#include <asm/cache.h>
+
+#ifndef __ASSEMBLY__
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *
+ *  Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry
+ *  in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c
+ *  for parsing the subtype in get_cpu_subtype().
+ */
+enum cpu_type {
+	/* SH-2 types */
+	CPU_SH7619, CPU_J2,
+
+	/* SH-2A types */
+	CPU_SH7201, CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_SH7264, CPU_SH7269,
+	CPU_MXG,
+
+	/* SH-3 types */
+	CPU_SH7705, CPU_SH7706, CPU_SH7707,
+	CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
+	CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
+	CPU_SH7720, CPU_SH7721, CPU_SH7729,
+
+	/* SH-4 types */
+	CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
+	CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
+
+	/* SH-4A types */
+	CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SH7786,
+	CPU_SH7723, CPU_SH7724, CPU_SH7757, CPU_SH7734, CPU_SHX3,
+
+	/* SH4AL-DSP types */
+	CPU_SH7343, CPU_SH7722, CPU_SH7366, CPU_SH7372,
+
+	/* SH-5 types */
+        CPU_SH5_101, CPU_SH5_103,
+
+	/* Unknown subtype */
+	CPU_SH_NONE
+};
+
+enum cpu_family {
+	CPU_FAMILY_SH2,
+	CPU_FAMILY_SH2A,
+	CPU_FAMILY_SH3,
+	CPU_FAMILY_SH4,
+	CPU_FAMILY_SH4A,
+	CPU_FAMILY_SH4AL_DSP,
+	CPU_FAMILY_SH5,
+	CPU_FAMILY_UNKNOWN,
+};
+
+/*
+ * TLB information structure
+ *
+ * Defined for both I and D tlb, per-processor.
+ */
+struct tlb_info {
+	unsigned long long next;
+	unsigned long long first;
+	unsigned long long last;
+
+	unsigned int entries;
+	unsigned int step;
+
+	unsigned long flags;
+};
+
+struct sh_cpuinfo {
+	unsigned int type, family;
+	int cut_major, cut_minor;
+	unsigned long loops_per_jiffy;
+	unsigned long asid_cache;
+
+	struct cache_info icache;	/* Primary I-cache */
+	struct cache_info dcache;	/* Primary D-cache */
+	struct cache_info scache;	/* Secondary cache */
+
+	/* TLB info */
+	struct tlb_info itlb;
+	struct tlb_info dtlb;
+
+	unsigned int phys_bits;
+	unsigned long flags;
+} __attribute__ ((aligned(L1_CACHE_BYTES)));
+
+extern struct sh_cpuinfo cpu_data[];
+#define boot_cpu_data cpu_data[0]
+#define current_cpu_data cpu_data[smp_processor_id()]
+#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+
+#define cpu_sleep()	__asm__ __volatile__ ("sleep" : : : "memory")
+#define cpu_relax()	barrier()
+
+void default_idle(void);
+void stop_this_cpu(void *);
+
+/* Forward decl */
+struct seq_operations;
+struct task_struct;
+
+extern struct pt_regs fake_swapper_regs;
+
+extern void cpu_init(void);
+extern void cpu_probe(void);
+
+/* arch/sh/kernel/process.c */
+extern unsigned int xstate_size;
+extern void free_thread_xstate(struct task_struct *);
+extern struct kmem_cache *task_xstate_cachep;
+
+/* arch/sh/mm/alignment.c */
+extern int get_unalign_ctl(struct task_struct *, unsigned long addr);
+extern int set_unalign_ctl(struct task_struct *, unsigned int val);
+
+#define GET_UNALIGN_CTL(tsk, addr)	get_unalign_ctl((tsk), (addr))
+#define SET_UNALIGN_CTL(tsk, val)	set_unalign_ctl((tsk), (val))
+
+/* arch/sh/mm/init.c */
+extern unsigned int mem_init_done;
+
+/* arch/sh/kernel/setup.c */
+const char *get_cpu_subtype(struct sh_cpuinfo *c);
+extern const struct seq_operations cpuinfo_op;
+
+/* thread_struct flags */
+#define SH_THREAD_UAC_NOPRINT	(1 << 0)
+#define SH_THREAD_UAC_SIGBUS	(1 << 1)
+#define SH_THREAD_UAC_MASK	(SH_THREAD_UAC_NOPRINT | SH_THREAD_UAC_SIGBUS)
+
+/* processor boot mode configuration */
+#define MODE_PIN0 (1 << 0)
+#define MODE_PIN1 (1 << 1)
+#define MODE_PIN2 (1 << 2)
+#define MODE_PIN3 (1 << 3)
+#define MODE_PIN4 (1 << 4)
+#define MODE_PIN5 (1 << 5)
+#define MODE_PIN6 (1 << 6)
+#define MODE_PIN7 (1 << 7)
+#define MODE_PIN8 (1 << 8)
+#define MODE_PIN9 (1 << 9)
+#define MODE_PIN10 (1 << 10)
+#define MODE_PIN11 (1 << 11)
+#define MODE_PIN12 (1 << 12)
+#define MODE_PIN13 (1 << 13)
+#define MODE_PIN14 (1 << 14)
+#define MODE_PIN15 (1 << 15)
+
+int generic_mode_pins(void);
+int test_mode_pin(int pin);
+
+#ifdef CONFIG_VSYSCALL
+int vsyscall_init(void);
+#else
+#define vsyscall_init() do { } while (0)
+#endif
+
+/*
+ * SH-2A has both 16 and 32-bit opcodes, do lame encoding checks.
+ */
+#ifdef CONFIG_CPU_SH2A
+extern unsigned int instruction_size(unsigned int insn);
+#elif defined(CONFIG_SUPERH32)
+#define instruction_size(insn)	(2)
+#else
+#define instruction_size(insn)	(4)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_SUPERH32
+# include <asm/processor_32.h>
+#else
+# include <asm/processor_64.h>
+#endif
+
+#endif /* __ASM_SH_PROCESSOR_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/processor_32.h b/src/kernel/linux/v4.14/arch/sh/include/asm/processor_32.h
new file mode 100644
index 0000000..95100d8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/processor_32.h
@@ -0,0 +1,213 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * include/asm-sh/processor.h
+ *
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ * Copyright (C) 2002, 2003  Paul Mundt
+ */
+
+#ifndef __ASM_SH_PROCESSOR_32_H
+#define __ASM_SH_PROCESSOR_32_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/hw_breakpoint.h>
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("mova	1f, %0\n.align 2\n1:":"=z" (pc)); pc; })
+
+/* Core Processor Version Register */
+#define CCN_PVR		0xff000030
+#define CCN_CVR		0xff000040
+#define CCN_PRR		0xff000044
+
+/*
+ * User space process size: 2GB.
+ *
+ * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff
+ */
+#define TASK_SIZE	0x7c000000UL
+
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	PAGE_ALIGN(TASK_SIZE / 3)
+
+/*
+ * Bit of SR register
+ *
+ * FD-bit:
+ *     When it's set, it means the processor doesn't have right to use FPU,
+ *     and it results exception when the floating operation is executed.
+ *
+ * IMASK-bit:
+ *     Interrupt level mask
+ */
+#define SR_DSP		0x00001000
+#define SR_IMASK	0x000000f0
+#define SR_FD		0x00008000
+#define SR_MD		0x40000000
+
+/*
+ * DSP structure and data
+ */
+struct sh_dsp_struct {
+	unsigned long dsp_regs[14];
+	long status;
+};
+
+/*
+ * FPU structure and data
+ */
+
+struct sh_fpu_hard_struct {
+	unsigned long fp_regs[16];
+	unsigned long xfp_regs[16];
+	unsigned long fpscr;
+	unsigned long fpul;
+
+	long status; /* software status information */
+};
+
+/* Dummy fpu emulator  */
+struct sh_fpu_soft_struct {
+	unsigned long fp_regs[16];
+	unsigned long xfp_regs[16];
+	unsigned long fpscr;
+	unsigned long fpul;
+
+	unsigned char lookahead;
+	unsigned long entry_pc;
+};
+
+union thread_xstate {
+	struct sh_fpu_hard_struct hardfpu;
+	struct sh_fpu_soft_struct softfpu;
+};
+
+struct thread_struct {
+	/* Saved registers when thread is descheduled */
+	unsigned long sp;
+	unsigned long pc;
+
+	/* Various thread flags, see SH_THREAD_xxx */
+	unsigned long flags;
+
+	/* Save middle states of ptrace breakpoints */
+	struct perf_event *ptrace_bps[HBP_NUM];
+
+#ifdef CONFIG_SH_DSP
+	/* Dsp status information */
+	struct sh_dsp_struct dsp_status;
+#endif
+
+	/* Extended processor state */
+	union thread_xstate *xstate;
+
+	/*
+	 * fpu_counter contains the number of consecutive context switches
+	 * that the FPU is used. If this is over a threshold, the lazy fpu
+	 * saving becomes unlazy to save the trap. This is an unsigned char
+	 * so that after 256 times the counter wraps and the behavior turns
+	 * lazy again; this to deal with bursty apps that only use FPU for
+	 * a short time
+	 */
+	unsigned char fpu_counter;
+};
+
+#define INIT_THREAD  {						\
+	.sp = sizeof(init_stack) + (long) &init_stack,		\
+	.flags = 0,						\
+}
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+extern void start_thread(struct pt_regs *regs, unsigned long new_pc, unsigned long new_sp);
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/*
+ * FPU lazy state save handling.
+ */
+
+static __inline__ void disable_fpu(void)
+{
+	unsigned long __dummy;
+
+	/* Set FD flag in SR */
+	__asm__ __volatile__("stc	sr, %0\n\t"
+			     "or	%1, %0\n\t"
+			     "ldc	%0, sr"
+			     : "=&r" (__dummy)
+			     : "r" (SR_FD));
+}
+
+static __inline__ void enable_fpu(void)
+{
+	unsigned long __dummy;
+
+	/* Clear out FD flag in SR */
+	__asm__ __volatile__("stc	sr, %0\n\t"
+			     "and	%1, %0\n\t"
+			     "ldc	%0, sr"
+			     : "=&r" (__dummy)
+			     : "r" (~SR_FD));
+}
+
+/* Double presision, NANS as NANS, rounding to nearest, no exceptions */
+#define FPSCR_INIT  0x00080000
+
+#define	FPSCR_CAUSE_MASK	0x0001f000	/* Cause bits */
+#define	FPSCR_FLAG_MASK		0x0000007c	/* Flag bits */
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+#define thread_saved_pc(tsk)	(tsk->thread.pc)
+
+void show_trace(struct task_struct *tsk, unsigned long *sp,
+		struct pt_regs *regs);
+
+#ifdef CONFIG_DUMP_CODE
+void show_code(struct pt_regs *regs);
+#else
+static inline void show_code(struct pt_regs *regs)
+{
+}
+#endif
+
+extern unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->pc)
+#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->regs[15])
+
+#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
+
+#define PREFETCH_STRIDE		L1_CACHE_BYTES
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+
+static inline void prefetch(const void *x)
+{
+	__builtin_prefetch(x, 0, 3);
+}
+
+static inline void prefetchw(const void *x)
+{
+	__builtin_prefetch(x, 1, 3);
+}
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_PROCESSOR_32_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/processor_64.h b/src/kernel/linux/v4.14/arch/sh/include/asm/processor_64.h
new file mode 100644
index 0000000..777a163
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/processor_64.h
@@ -0,0 +1,230 @@
+#ifndef __ASM_SH_PROCESSOR_64_H
+#define __ASM_SH_PROCESSOR_64_H
+
+/*
+ * include/asm-sh/processor_64.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <cpu/registers.h>
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ \
+void *pc; \
+unsigned long long __dummy = 0; \
+__asm__("gettr	tr0, %1\n\t" \
+	"pta	4, tr0\n\t" \
+	"gettr	tr0, %0\n\t" \
+	"ptabs	%1, tr0\n\t"	\
+	:"=r" (pc), "=r" (__dummy) \
+	: "1" (__dummy)); \
+pc; })
+
+#endif
+
+/*
+ * User space process size: 2GB - 4k.
+ */
+#define TASK_SIZE	0x7ffff000UL
+
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	PAGE_ALIGN(TASK_SIZE / 3)
+
+/*
+ * Bit of SR register
+ *
+ * FD-bit:
+ *     When it's set, it means the processor doesn't have right to use FPU,
+ *     and it results exception when the floating operation is executed.
+ *
+ * IMASK-bit:
+ *     Interrupt level mask
+ *
+ * STEP-bit:
+ *     Single step bit
+ *
+ */
+#if defined(CONFIG_SH64_SR_WATCH)
+#define SR_MMU   0x84000000
+#else
+#define SR_MMU   0x80000000
+#endif
+
+#define SR_IMASK 0x000000f0
+#define SR_FD    0x00008000
+#define SR_SSTEP 0x08000000
+
+#ifndef __ASSEMBLY__
+
+/*
+ * FPU structure and data : require 8-byte alignment as we need to access it
+   with fld.p, fst.p
+ */
+
+struct sh_fpu_hard_struct {
+	unsigned long fp_regs[64];
+	unsigned int fpscr;
+	/* long status; * software status information */
+};
+
+/* Dummy fpu emulator  */
+struct sh_fpu_soft_struct {
+	unsigned long fp_regs[64];
+	unsigned int fpscr;
+	unsigned char lookahead;
+	unsigned long entry_pc;
+};
+
+union thread_xstate {
+	struct sh_fpu_hard_struct hardfpu;
+	struct sh_fpu_soft_struct softfpu;
+	/*
+	 * The structure definitions only produce 32 bit alignment, yet we need
+	 * to access them using 64 bit load/store as well.
+	 */
+	unsigned long long alignment_dummy;
+};
+
+struct thread_struct {
+	unsigned long sp;
+	unsigned long pc;
+
+	/* Various thread flags, see SH_THREAD_xxx */
+	unsigned long flags;
+
+	/* This stores the address of the pt_regs built during a context
+	   switch, or of the register save area built for a kernel mode
+	   exception.  It is used for backtracing the stack of a sleeping task
+	   or one that traps in kernel mode. */
+        struct pt_regs *kregs;
+	/* This stores the address of the pt_regs constructed on entry from
+	   user mode.  It is a fixed value over the lifetime of a process, or
+	   NULL for a kernel thread. */
+	struct pt_regs *uregs;
+
+	unsigned long address;
+	/* Hardware debugging registers may come here */
+
+	/* floating point info */
+	union thread_xstate *xstate;
+
+	/*
+	 * fpu_counter contains the number of consecutive context switches
+	 * that the FPU is used. If this is over a threshold, the lazy fpu
+	 * saving becomes unlazy to save the trap. This is an unsigned char
+	 * so that after 256 times the counter wraps and the behavior turns
+	 * lazy again; this to deal with bursty apps that only use FPU for
+	 * a short time
+	 */
+	unsigned char fpu_counter;
+};
+
+#define INIT_MMAP \
+{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL }
+
+#define INIT_THREAD  {				\
+	.sp		= sizeof(init_stack) +	\
+			  (long) &init_stack,	\
+	.pc		= 0,			\
+        .kregs		= &fake_swapper_regs,	\
+	.uregs	        = NULL,			\
+	.address	= 0,			\
+	.flags		= 0,			\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+#define SR_USER (SR_MMU | SR_FD)
+
+#define start_thread(_regs, new_pc, new_sp)			\
+	_regs->sr = SR_USER;	/* User mode. */		\
+	_regs->pc = new_pc - 4;	/* Compensate syscall exit */	\
+	_regs->pc |= 1;		/* Set SHmedia ! */		\
+	_regs->regs[18] = 0;					\
+	_regs->regs[15] = new_sp
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/*
+ * FPU lazy state save handling.
+ */
+
+static inline void disable_fpu(void)
+{
+	unsigned long long __dummy;
+
+	/* Set FD flag in SR */
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "or	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy)
+			     : "r" (SR_FD));
+}
+
+static inline void enable_fpu(void)
+{
+	unsigned long long __dummy;
+
+	/* Clear out FD flag in SR */
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "and	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy)
+			     : "r" (~SR_FD));
+}
+
+/* Round to nearest, no exceptions on inexact, overflow, underflow,
+   zero-divide, invalid.  Configure option for whether to flush denorms to
+   zero, or except if a denorm is encountered.  */
+#if defined(CONFIG_SH64_FPU_DENORM_FLUSH)
+#define FPSCR_INIT  0x00040000
+#else
+#define FPSCR_INIT  0x00000000
+#endif
+
+#ifdef CONFIG_SH_FPU
+/* Initialise the FP state of a task */
+void fpinit(struct sh_fpu_hard_struct *fpregs);
+#else
+#define fpinit(fpregs)	do { } while (0)
+#endif
+
+extern struct task_struct *last_task_used_math;
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+#define thread_saved_pc(tsk)	(tsk->thread.pc)
+
+extern unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)  ((tsk)->thread.pc)
+#define KSTK_ESP(tsk)  ((tsk)->thread.sp)
+
+#endif	/* __ASSEMBLY__ */
+#endif /* __ASM_SH_PROCESSOR_64_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/ptrace.h b/src/kernel/linux/v4.14/arch/sh/include/asm/ptrace.h
new file mode 100644
index 0000000..9143c7b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/ptrace.h
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ */
+#ifndef __ASM_SH_PTRACE_H
+#define __ASM_SH_PTRACE_H
+
+
+#include <linux/stringify.h>
+#include <linux/stddef.h>
+#include <linux/thread_info.h>
+#include <asm/addrspace.h>
+#include <asm/page.h>
+#include <uapi/asm/ptrace.h>
+
+#define user_mode(regs)			(((regs)->sr & 0x40000000)==0)
+#define kernel_stack_pointer(_regs)	((unsigned long)(_regs)->regs[15])
+
+#define GET_FP(regs)	((regs)->regs[14])
+#define GET_USP(regs)	((regs)->regs[15])
+
+#define arch_has_single_step()	(1)
+
+/*
+ * kprobe-based event tracer support
+ */
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
+#define REGS_OFFSET_NAME(num)	\
+	{.name = __stringify(r##num), .offset = offsetof(struct pt_regs, regs[num])}
+#define TREGS_OFFSET_NAME(num)	\
+	{.name = __stringify(tr##num), .offset = offsetof(struct pt_regs, tregs[num])}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+/* Query offset/name of register from its name/offset */
+extern int regs_query_register_offset(const char *name);
+extern const char *regs_query_register_name(unsigned int offset);
+
+extern const struct pt_regs_offset regoffset_table[];
+
+/**
+ * regs_get_register() - get register value from its offset
+ * @regs:	pt_regs from which register value is gotten.
+ * @offset:	offset number of the register.
+ *
+ * regs_get_register returns the value of a register. The @offset is the
+ * offset of the register in struct pt_regs address which specified by @regs.
+ * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
+ */
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+					      unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
+/**
+ * regs_within_kernel_stack() - check the address in the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @addr:	address which is checked.
+ *
+ * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
+ * If @addr is within the kernel stack, it returns true. If not, returns false.
+ */
+static inline int regs_within_kernel_stack(struct pt_regs *regs,
+					   unsigned long addr)
+{
+	return ((addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
+}
+
+/**
+ * regs_get_kernel_stack_nth() - get Nth entry of the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @n:		stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
+ * is specified by @regs. If the @n th entry is NOT in the kernel stack,
+ * this returns 0.
+ */
+static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+						      unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
+}
+
+struct perf_event;
+struct perf_sample_data;
+
+extern void ptrace_triggered(struct perf_event *bp,
+		      struct perf_sample_data *data, struct pt_regs *regs);
+
+#define task_pt_regs(task) \
+	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE) - 1)
+
+static inline unsigned long profile_pc(struct pt_regs *regs)
+{
+	unsigned long pc = regs->pc;
+
+	if (virt_addr_uncached(pc))
+		return CAC_ADDR(pc);
+
+	return pc;
+}
+#define profile_pc profile_pc
+
+#include <asm-generic/ptrace.h>
+#endif /* __ASM_SH_PTRACE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/ptrace_32.h b/src/kernel/linux/v4.14/arch/sh/include/asm/ptrace_32.h
new file mode 100644
index 0000000..5f37ad7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/ptrace_32.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_PTRACE_32_H
+#define __ASM_SH_PTRACE_32_H
+
+#include <uapi/asm/ptrace_32.h>
+
+
+#define MAX_REG_OFFSET		offsetof(struct pt_regs, tra)
+static inline long regs_return_value(struct pt_regs *regs)
+{
+	return regs->regs[0];
+}
+
+#endif /* __ASM_SH_PTRACE_32_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/ptrace_64.h b/src/kernel/linux/v4.14/arch/sh/include/asm/ptrace_64.h
new file mode 100644
index 0000000..6ee0822
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/ptrace_64.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_PTRACE_64_H
+#define __ASM_SH_PTRACE_64_H
+
+#include <uapi/asm/ptrace_64.h>
+
+
+#define MAX_REG_OFFSET		offsetof(struct pt_regs, tregs[7])
+static inline long regs_return_value(struct pt_regs *regs)
+{
+	return regs->regs[3];
+}
+
+#endif /* __ASM_SH_PTRACE_64_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/push-switch.h b/src/kernel/linux/v4.14/arch/sh/include/asm/push-switch.h
new file mode 100644
index 0000000..c5f0725
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/push-switch.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_PUSH_SWITCH_H
+#define __ASM_SH_PUSH_SWITCH_H
+
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+struct push_switch {
+	/* switch state */
+	unsigned int		state:1;
+	/* debounce timer */
+	struct timer_list	debounce;
+	/* workqueue */
+	struct work_struct	work;
+	/* platform device, for workqueue handler */
+	struct platform_device	*pdev;
+};
+
+struct push_switch_platform_info {
+	/* IRQ handler */
+	irqreturn_t		(*irq_handler)(int irq, void *data);
+	/* Special IRQ flags */
+	unsigned int		irq_flags;
+	/* Bit location of switch */
+	unsigned int		bit;
+	/* Symbolic switch name */
+	const char		*name;
+};
+
+#endif /* __ASM_SH_PUSH_SWITCH_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/reboot.h b/src/kernel/linux/v4.14/arch/sh/include/asm/reboot.h
new file mode 100644
index 0000000..5c445c9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/reboot.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_REBOOT_H
+#define __ASM_SH_REBOOT_H
+
+#include <linux/kdebug.h>
+
+struct pt_regs;
+
+struct machine_ops {
+	void (*restart)(char *cmd);
+	void (*halt)(void);
+	void (*power_off)(void);
+	void (*shutdown)(void);
+	void (*crash_shutdown)(struct pt_regs *);
+};
+
+extern struct machine_ops machine_ops;
+
+/* arch/sh/kernel/machine_kexec.c */
+void native_machine_crash_shutdown(struct pt_regs *regs);
+
+#endif /* __ASM_SH_REBOOT_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/romimage-macros.h b/src/kernel/linux/v4.14/arch/sh/include/asm/romimage-macros.h
new file mode 100644
index 0000000..f9352ee
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/romimage-macros.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ROMIMAGE_MACRO_H
+#define __ROMIMAGE_MACRO_H
+
+/* The LIST command is used to include comments in the script */
+.macro	LIST comment
+.endm
+
+/* The ED command is used to write a 32-bit word */
+.macro  ED, addr, data
+	mov.l 1f, r1
+	mov.l 2f, r0
+	mov.l r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1 :	.long \addr
+2 :	.long \data
+3 :
+.endm
+
+/* The EW command is used to write a 16-bit word */
+.macro  EW, addr, data
+	mov.l 1f, r1
+	mov.l 2f, r0
+	mov.w r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1 :	.long \addr
+2 :	.long \data
+3 :
+.endm
+
+/* The EB command is used to write an 8-bit word */
+.macro  EB, addr, data
+	mov.l 1f, r1
+	mov.l 2f, r0
+	mov.b r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1 :	.long \addr
+2 :	.long \data
+3 :
+.endm
+
+/* The WAIT command is used to delay the execution */
+.macro  WAIT, time
+	mov.l  2f, r3
+1 :
+	nop
+	tst     r3, r3
+	bf/s    1b
+	dt      r3
+	bra	3f
+	 nop
+	.align 2
+2 :	.long \time * 100
+3 :
+.endm
+
+/* The DD command is used to read a 32-bit word */
+.macro  DD, addr, addr2, nr
+	mov.l 1f, r1
+	mov.l @r1, r0
+	bra 2f
+	 nop
+	.align 2
+1 :	.long \addr
+2 :
+.endm
+
+#endif /* __ROMIMAGE_MACRO_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/rtc.h b/src/kernel/linux/v4.14/arch/sh/include/asm/rtc.h
new file mode 100644
index 0000000..c63555e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/rtc.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_RTC_H
+#define _ASM_RTC_H
+
+void time_init(void);
+extern void (*board_time_init)(void);
+extern void (*rtc_sh_get_time)(struct timespec *);
+extern int (*rtc_sh_set_time)(const time_t);
+
+#define RTC_CAP_4_DIGIT_YEAR	(1 << 0)
+
+struct sh_rtc_platform_info {
+	unsigned long capabilities;
+};
+
+#include <cpu/rtc.h>
+
+#endif /* _ASM_RTC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/seccomp.h b/src/kernel/linux/v4.14/arch/sh/include/asm/seccomp.h
new file mode 100644
index 0000000..54111e4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/seccomp.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SECCOMP_H
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#endif /* __ASM_SECCOMP_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/sections.h b/src/kernel/linux/v4.14/arch/sh/include/asm/sections.h
new file mode 100644
index 0000000..8edb824
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/sections.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SECTIONS_H
+#define __ASM_SH_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+extern long __machvec_start, __machvec_end;
+extern char __uncached_start, __uncached_end;
+extern char __start_eh_frame[], __stop_eh_frame[];
+
+#endif /* __ASM_SH_SECTIONS_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/segment.h b/src/kernel/linux/v4.14/arch/sh/include/asm/segment.h
new file mode 100644
index 0000000..101c13c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/segment.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SEGMENT_H
+#define __ASM_SH_SEGMENT_H
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFFUL)
+#ifdef CONFIG_MMU
+#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
+#else
+#define USER_DS		KERNEL_DS
+#endif
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#define get_ds()	(KERNEL_DS)
+
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_SEGMENT_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/setup.h b/src/kernel/linux/v4.14/arch/sh/include/asm/setup.h
new file mode 100644
index 0000000..fc80701
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/setup.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SH_SETUP_H
+#define _SH_SETUP_H
+
+#include <uapi/asm/setup.h>
+
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+#define PARAM	((unsigned char *)empty_zero_page)
+
+#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
+#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
+#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
+#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
+#define INITRD_START (*(unsigned long *) (PARAM+0x010))
+#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
+/* ... */
+#define COMMAND_LINE ((char *) (PARAM+0x100))
+
+void sh_mv_setup(void);
+void check_for_initrd(void);
+void per_cpu_trap_init(void);
+
+#endif /* _SH_SETUP_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/sfp-machine.h b/src/kernel/linux/v4.14/arch/sh/include/asm/sfp-machine.h
new file mode 100644
index 0000000..d3c5484
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/sfp-machine.h
@@ -0,0 +1,84 @@
+/* Machine-dependent software floating-point definitions.
+   SuperH kernel version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+
+#define _FP_W_TYPE_SIZE		32
+#define _FP_W_TYPE		unsigned long
+#define _FP_WS_TYPE		signed long
+#define _FP_I_TYPE		long
+
+#define _FP_MUL_MEAT_S(R,X,Y)					\
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_D(R,X,Y)					\
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)					\
+  _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_udiv(S,R,X,Y)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_2_udiv(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_4_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1), -1
+#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
+#define _FP_NANSIGN_S		0
+#define _FP_NANSIGN_D		0
+#define _FP_NANSIGN_Q		0
+
+#define _FP_KEEPNANFRACP 1
+
+/*
+ * If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)                      \
+  do {                                                          \
+    if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)          \
+        && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs))     \
+      {                                                         \
+        R##_s = Y##_s;                                          \
+        _FP_FRAC_COPY_##wc(R,Y);                                \
+      }                                                         \
+    else                                                        \
+      {                                                         \
+        R##_s = X##_s;                                          \
+        _FP_FRAC_COPY_##wc(R,X);                                \
+      }                                                         \
+    R##_c = FP_CLS_NAN;                                         \
+  } while (0)
+
+//#define FP_ROUNDMODE		FPSCR_RM
+#define FP_DENORM_ZERO		1/*FPSCR_DN*/
+
+/* Exception flags. */
+#define FP_EX_INVALID		(1<<4)
+#define FP_EX_DIVZERO		(1<<3)
+#define FP_EX_OVERFLOW		(1<<2)
+#define FP_EX_UNDERFLOW		(1<<1)
+#define FP_EX_INEXACT		(1<<0)
+
+#endif
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/sh7760fb.h b/src/kernel/linux/v4.14/arch/sh/include/asm/sh7760fb.h
new file mode 100644
index 0000000..2d9433d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/sh7760fb.h
@@ -0,0 +1,198 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * sh7760fb.h -- platform data for SH7760/SH7763 LCDC framebuffer driver.
+ *
+ * (c) 2006-2008 MSC Vertriebsges.m.b.H.,
+ * 			Manuel Lauss <mano@roarinelk.homelinux.net>
+ * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ */
+
+#ifndef _ASM_SH_SH7760FB_H
+#define _ASM_SH_SH7760FB_H
+
+/*
+ * some bits of the colormap registers should be written as zero.
+ * create a mask for that.
+ */
+#define SH7760FB_PALETTE_MASK 0x00f8fcf8
+
+/* The LCDC dma engine always sets bits 27-26 to 1: this is Area3 */
+#define SH7760FB_DMA_MASK 0x0C000000
+
+/* palette */
+#define LDPR(x) (((x) << 2))
+
+/* framebuffer registers and bits */
+#define LDICKR 0x400
+#define LDMTR 0x402
+/* see sh7760fb.h for LDMTR bits */
+#define LDDFR 0x404
+#define LDDFR_PABD (1 << 8)
+#define LDDFR_COLOR_MASK 0x7F
+#define LDSMR 0x406
+#define LDSMR_ROT (1 << 13)
+#define LDSARU 0x408
+#define LDSARL 0x40c
+#define LDLAOR 0x410
+#define LDPALCR 0x412
+#define LDPALCR_PALS (1 << 4)
+#define LDPALCR_PALEN (1 << 0)
+#define LDHCNR 0x414
+#define LDHSYNR 0x416
+#define LDVDLNR 0x418
+#define LDVTLNR 0x41a
+#define LDVSYNR 0x41c
+#define LDACLNR 0x41e
+#define LDINTR 0x420
+#define LDPMMR 0x424
+#define LDPSPR 0x426
+#define LDCNTR 0x428
+#define LDCNTR_DON (1 << 0)
+#define LDCNTR_DON2 (1 << 4)
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+# define LDLIRNR       0x440
+/* LDINTR bit */
+# define LDINTR_MINTEN (1 << 15)
+# define LDINTR_FINTEN (1 << 14)
+# define LDINTR_VSINTEN (1 << 13)
+# define LDINTR_VEINTEN (1 << 12)
+# define LDINTR_MINTS (1 << 11)
+# define LDINTR_FINTS (1 << 10)
+# define LDINTR_VSINTS (1 << 9)
+# define LDINTR_VEINTS (1 << 8)
+# define VINT_START (LDINTR_VSINTEN)
+# define VINT_CHECK (LDINTR_VSINTS)
+#else
+/* LDINTR bit */
+# define LDINTR_VINTSEL (1 << 12)
+# define LDINTR_VINTE (1 << 8)
+# define LDINTR_VINTS (1 << 0)
+# define VINT_START (LDINTR_VINTSEL)
+# define VINT_CHECK (LDINTR_VINTS)
+#endif
+
+/* HSYNC polarity inversion */
+#define LDMTR_FLMPOL (1 << 15)
+
+/* VSYNC polarity inversion */
+#define LDMTR_CL1POL (1 << 14)
+
+/* DISPLAY-ENABLE polarity inversion */
+#define LDMTR_DISPEN_LOWACT (1 << 13)
+
+/* DISPLAY DATA BUS polarity inversion */
+#define LDMTR_DPOL_LOWACT (1 << 12)
+
+/* AC modulation signal enable */
+#define LDMTR_MCNT (1 << 10)
+
+/* Disable output of HSYNC during VSYNC period */
+#define LDMTR_CL1CNT (1 << 9)
+
+/* Disable output of VSYNC during VSYNC period */
+#define LDMTR_CL2CNT (1 << 8)
+
+/* Display types supported by the LCDC */
+#define LDMTR_STN_MONO_4       0x00
+#define LDMTR_STN_MONO_8       0x01
+#define LDMTR_STN_COLOR_4      0x08
+#define LDMTR_STN_COLOR_8      0x09
+#define LDMTR_STN_COLOR_12     0x0A
+#define LDMTR_STN_COLOR_16     0x0B
+#define LDMTR_DSTN_MONO_8      0x11
+#define LDMTR_DSTN_MONO_16     0x13
+#define LDMTR_DSTN_COLOR_8     0x19
+#define LDMTR_DSTN_COLOR_12    0x1A
+#define LDMTR_DSTN_COLOR_16    0x1B
+#define LDMTR_TFT_COLOR_16     0x2B
+
+/* framebuffer color layout */
+#define LDDFR_1BPP_MONO 0x00
+#define LDDFR_2BPP_MONO 0x01
+#define LDDFR_4BPP_MONO 0x02
+#define LDDFR_6BPP_MONO 0x04
+#define LDDFR_4BPP 0x0A
+#define LDDFR_8BPP 0x0C
+#define LDDFR_16BPP_RGB555 0x1D
+#define LDDFR_16BPP_RGB565 0x2D
+
+/* LCDC Pixclock sources */
+#define LCDC_CLKSRC_BUSCLOCK 0
+#define LCDC_CLKSRC_PERIPHERAL 1
+#define LCDC_CLKSRC_EXTERNAL 2
+
+#define LDICKR_CLKSRC(x) \
+       (((x) & 3) << 12)
+
+/* LCDC pixclock input divider. Set to 1 at a minimum! */
+#define LDICKR_CLKDIV(x) \
+       ((x) & 0x1f)
+
+struct sh7760fb_platdata {
+
+	/* Set this member to a valid fb_videmode for the display you
+	 * wish to use.  The following members must be initialized:
+	 * xres, yres, hsync_len, vsync_len, sync,
+	 * {left,right,upper,lower}_margin.
+	 * The driver uses the above members to calculate register values
+	 * and memory requirements. Other members are ignored but may
+	 * be used by other framebuffer layer components.
+	 */
+	struct fb_videomode *def_mode;
+
+	/* LDMTR includes display type and signal polarity.  The
+	 * HSYNC/VSYNC polarities are derived from the fb_var_screeninfo
+	 * data above; however the polarities of the following signals
+	 * must be encoded in the ldmtr member:
+	 * Display Enable signal (default high-active)  DISPEN_LOWACT
+	 * Display Data signals (default high-active)   DPOL_LOWACT
+	 * AC Modulation signal (default off)           MCNT
+	 * Hsync-During-Vsync suppression (default off) CL1CNT
+	 * Vsync-during-vsync suppression (default off) CL2CNT
+	 * NOTE: also set a display type!
+	 * (one of LDMTR_{STN,DSTN,TFT}_{MONO,COLOR}_{4,8,12,16})
+	 */
+	u16 ldmtr;
+
+	/* LDDFR controls framebuffer image format (depth, organization)
+	 * Use ONE of the LDDFR_?BPP_* macros!
+	 */
+	u16 lddfr;
+
+	/* LDPMMR and LDPSPR control the timing of the power signals
+	 * for the display. Please read the SH7760 Hardware Manual,
+	 * Chapters 30.3.17, 30.3.18 and 30.4.6!
+	 */
+	u16 ldpmmr;
+	u16 ldpspr;
+
+	/* LDACLNR contains the line numbers after which the AC modulation
+	 * signal is to toggle. Set to ZERO for TFTs or displays which
+	 * do not need it. (Chapter 30.3.15 in SH7760 Hardware Manual).
+	 */
+	u16 ldaclnr;
+
+	/* LDICKR contains information on pixelclock source and config.
+	 * Please use the LDICKR_CLKSRC() and LDICKR_CLKDIV() macros.
+	 * minimal value for CLKDIV() must be 1!.
+	 */
+	u16 ldickr;
+
+	/* set this member to 1 if you wish to use the LCDC's hardware
+	 * rotation function.  This is limited to displays <= 320x200
+	 * pixels resolution!
+	 */
+	int rotate;		/* set to 1 to rotate 90 CCW */
+
+	/* set this to 1 to suppress vsync irq use. */
+	int novsync;
+
+	/* blanking hook for platform. Set this if your platform can do
+	 * more than the LCDC in terms of blanking (e.g. disable clock
+	 * generator / backlight power supply / etc.
+	 */
+	void (*blank) (int);
+};
+
+#endif /* _ASM_SH_SH7760FB_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/sh_bios.h b/src/kernel/linux/v4.14/arch/sh/include/asm/sh_bios.h
new file mode 100644
index 0000000..ab693b9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/sh_bios.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_BIOS_H
+#define __ASM_SH_BIOS_H
+
+#ifdef CONFIG_SH_STANDARD_BIOS
+
+/*
+ * Copyright (C) 2000 Greg Banks, Mitch Davis
+ * C API to interface to the standard LinuxSH BIOS
+ * usually from within the early stages of kernel boot.
+ */
+extern void sh_bios_console_write(const char *buf, unsigned int len);
+extern void sh_bios_gdb_detach(void);
+
+extern void sh_bios_get_node_addr(unsigned char *node_addr);
+extern void sh_bios_shutdown(unsigned int how);
+
+extern void sh_bios_vbr_init(void);
+extern void sh_bios_vbr_reload(void);
+
+#else
+
+static inline void sh_bios_vbr_init(void) { }
+static inline void sh_bios_vbr_reload(void) { }
+
+#endif /* CONFIG_SH_STANDARD_BIOS */
+
+#endif /* __ASM_SH_BIOS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/shmparam.h b/src/kernel/linux/v4.14/arch/sh/include/asm/shmparam.h
new file mode 100644
index 0000000..ba1758d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/shmparam.h
@@ -0,0 +1,22 @@
+/*
+ * include/asm-sh/shmparam.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_SHMPARAM_H
+#define __ASM_SH_SHMPARAM_H
+
+/*
+ * SH-4 and SH-3 7705 have an aliasing dcache. Bump this up to a sensible value
+ * for everyone, and work out the specifics from the probed cache descriptor.
+ */
+#define	SHMLBA	0x4000		 /* attach addr a multiple of this */
+
+#define __ARCH_FORCE_SHMLBA
+
+#endif /* __ASM_SH_SHMPARAM_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/siu.h b/src/kernel/linux/v4.14/arch/sh/include/asm/siu.h
new file mode 100644
index 0000000..580b7ac
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/siu.h
@@ -0,0 +1,23 @@
+/*
+ * platform header for the SIU ASoC driver
+ *
+ * Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_SIU_H
+#define ASM_SIU_H
+
+struct device;
+
+struct siu_platform {
+	unsigned int dma_slave_tx_a;
+	unsigned int dma_slave_rx_a;
+	unsigned int dma_slave_tx_b;
+	unsigned int dma_slave_rx_b;
+};
+
+#endif /* ASM_SIU_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/smc37c93x.h b/src/kernel/linux/v4.14/arch/sh/include/asm/smc37c93x.h
new file mode 100644
index 0000000..f054c30
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/smc37c93x.h
@@ -0,0 +1,191 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SMC37C93X_H
+#define __ASM_SH_SMC37C93X_H
+
+/*
+ * linux/include/asm-sh/smc37c93x.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * SMSC 37C93x Super IO Chip support
+ */
+
+/* Default base I/O address */
+#define FDC_PRIMARY_BASE	0x3f0
+#define IDE1_PRIMARY_BASE	0x1f0
+#define IDE1_SECONDARY_BASE	0x170
+#define PARPORT_PRIMARY_BASE	0x378
+#define COM1_PRIMARY_BASE	0x2f8
+#define COM2_PRIMARY_BASE	0x3f8
+#define RTC_PRIMARY_BASE	0x070
+#define KBC_PRIMARY_BASE	0x060
+#define AUXIO_PRIMARY_BASE	0x000	/* XXX */
+
+/* Logical device number */
+#define LDN_FDC			0
+#define LDN_IDE1		1
+#define LDN_IDE2		2
+#define LDN_PARPORT		3
+#define LDN_COM1		4
+#define LDN_COM2		5
+#define LDN_RTC			6
+#define LDN_KBC			7
+#define LDN_AUXIO		8
+
+/* Configuration port and key */
+#define CONFIG_PORT		0x3f0
+#define INDEX_PORT		CONFIG_PORT
+#define DATA_PORT		0x3f1
+#define CONFIG_ENTER		0x55
+#define CONFIG_EXIT		0xaa
+
+/* Configuration index */
+#define CURRENT_LDN_INDEX	0x07
+#define POWER_CONTROL_INDEX	0x22
+#define ACTIVATE_INDEX		0x30
+#define IO_BASE_HI_INDEX	0x60
+#define IO_BASE_LO_INDEX	0x61
+#define IRQ_SELECT_INDEX	0x70
+#define DMA_SELECT_INDEX	0x74
+
+#define GPIO46_INDEX		0xc6
+#define GPIO47_INDEX		0xc7
+
+/* UART stuff. Only for debugging.  */
+/* UART Register */
+
+#define UART_RBR	0x0	/* Receiver Buffer Register (Read Only) */
+#define UART_THR	0x0	/* Transmitter Holding Register (Write Only) */
+#define UART_IER	0x2	/* Interrupt Enable Register */
+#define UART_IIR	0x4	/* Interrupt Ident Register (Read Only) */
+#define UART_FCR	0x4	/* FIFO Control Register (Write Only) */
+#define UART_LCR	0x6	/* Line Control Register */
+#define UART_MCR	0x8	/* MODEM Control Register */
+#define UART_LSR	0xa	/* Line Status Register */
+#define UART_MSR	0xc	/* MODEM Status Register */
+#define UART_SCR	0xe	/* Scratch Register */
+#define UART_DLL	0x0	/* Divisor Latch (LS) */
+#define UART_DLM	0x2	/* Divisor Latch (MS) */
+
+#ifndef __ASSEMBLY__
+typedef struct uart_reg {
+	volatile __u16 rbr;
+	volatile __u16 ier;
+	volatile __u16 iir;
+	volatile __u16 lcr;
+	volatile __u16 mcr;
+	volatile __u16 lsr;
+	volatile __u16 msr;
+	volatile __u16 scr;
+} uart_reg;
+#endif /* ! __ASSEMBLY__ */
+
+/* Alias for Write Only Register */
+
+#define thr	rbr
+#define tcr	iir
+
+/* Alias for Divisor Latch Register */
+
+#define dll	rbr
+#define dlm	ier
+#define fcr	iir
+
+/* Interrupt Enable Register */
+
+#define IER_ERDAI	0x0100	/* Enable Received Data Available Interrupt */
+#define IER_ETHREI	0x0200	/* Enable Transmitter Holding Register Empty Interrupt */
+#define IER_ELSI	0x0400	/* Enable Receiver Line Status Interrupt */
+#define IER_EMSI	0x0800	/* Enable MODEM Status Interrupt */
+
+/* Interrupt Ident Register */
+
+#define IIR_IP		0x0100	/* "0" if Interrupt Pending */
+#define IIR_IIB0	0x0200	/* Interrupt ID Bit 0 */
+#define IIR_IIB1	0x0400	/* Interrupt ID Bit 1 */
+#define IIR_IIB2	0x0800	/* Interrupt ID Bit 2 */
+#define IIR_FIFO	0xc000	/* FIFOs enabled */
+
+/* FIFO Control Register */
+
+#define FCR_FEN		0x0100	/* FIFO enable */
+#define FCR_RFRES	0x0200	/* Receiver FIFO reset */
+#define FCR_TFRES	0x0400	/* Transmitter FIFO reset */
+#define FCR_DMA		0x0800	/* DMA mode select */
+#define FCR_RTL		0x4000	/* Receiver triger (LSB) */
+#define FCR_RTM		0x8000	/* Receiver triger (MSB) */
+
+/* Line Control Register */
+
+#define LCR_WLS0	0x0100	/* Word Length Select Bit 0 */
+#define LCR_WLS1	0x0200	/* Word Length Select Bit 1 */
+#define LCR_STB		0x0400	/* Number of Stop Bits */
+#define LCR_PEN		0x0800	/* Parity Enable */
+#define LCR_EPS		0x1000	/* Even Parity Select */
+#define LCR_SP		0x2000	/* Stick Parity */
+#define LCR_SB		0x4000	/* Set Break */
+#define LCR_DLAB	0x8000	/* Divisor Latch Access Bit */
+
+/* MODEM Control Register */
+
+#define MCR_DTR		0x0100	/* Data Terminal Ready */
+#define MCR_RTS		0x0200	/* Request to Send */
+#define MCR_OUT1	0x0400	/* Out 1 */
+#define MCR_IRQEN	0x0800	/* IRQ Enable */
+#define MCR_LOOP	0x1000	/* Loop */
+
+/* Line Status Register */
+
+#define LSR_DR		0x0100	/* Data Ready */
+#define LSR_OE		0x0200	/* Overrun Error */
+#define LSR_PE		0x0400	/* Parity Error */
+#define LSR_FE		0x0800	/* Framing Error */
+#define LSR_BI		0x1000	/* Break Interrupt */
+#define LSR_THRE	0x2000	/* Transmitter Holding Register Empty */
+#define LSR_TEMT	0x4000	/* Transmitter Empty */
+#define LSR_FIFOE	0x8000	/* Receiver FIFO error */
+
+/* MODEM Status Register */
+
+#define MSR_DCTS	0x0100	/* Delta Clear to Send */
+#define MSR_DDSR	0x0200	/* Delta Data Set Ready */
+#define MSR_TERI	0x0400	/* Trailing Edge Ring Indicator */
+#define MSR_DDCD	0x0800	/* Delta Data Carrier Detect */
+#define MSR_CTS		0x1000	/* Clear to Send */
+#define MSR_DSR		0x2000	/* Data Set Ready */
+#define MSR_RI		0x4000	/* Ring Indicator */
+#define MSR_DCD		0x8000	/* Data Carrier Detect */
+
+/* Baud Rate Divisor */
+
+#define UART_CLK	(1843200)	/* 1.8432 MHz */
+#define UART_BAUD(x)	(UART_CLK / (16 * (x)))
+
+/* RTC register definition */
+#define RTC_SECONDS             0
+#define RTC_SECONDS_ALARM       1
+#define RTC_MINUTES             2
+#define RTC_MINUTES_ALARM       3
+#define RTC_HOURS               4
+#define RTC_HOURS_ALARM         5
+#define RTC_DAY_OF_WEEK         6
+#define RTC_DAY_OF_MONTH        7
+#define RTC_MONTH               8
+#define RTC_YEAR                9
+#define RTC_FREQ_SELECT		10
+# define RTC_UIP 0x80
+# define RTC_DIV_CTL 0x70
+/* This RTC can work under 32.768KHz clock only.  */
+# define RTC_OSC_ENABLE 0x20
+# define RTC_OSC_DISABLE 0x00
+#define RTC_CONTROL     	11
+# define RTC_SET 0x80
+# define RTC_PIE 0x40
+# define RTC_AIE 0x20
+# define RTC_UIE 0x10
+# define RTC_SQWE 0x08
+# define RTC_DM_BINARY 0x04
+# define RTC_24H 0x02
+# define RTC_DST_EN 0x01
+
+#endif  /* __ASM_SH_SMC37C93X_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/smp-ops.h b/src/kernel/linux/v4.14/arch/sh/include/asm/smp-ops.h
new file mode 100644
index 0000000..e277021
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/smp-ops.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SMP_OPS_H
+#define __ASM_SH_SMP_OPS_H
+
+struct plat_smp_ops {
+	void (*smp_setup)(void);
+	unsigned int (*smp_processor_id)(void);
+	void (*prepare_cpus)(unsigned int max_cpus);
+	void (*start_cpu)(unsigned int cpu, unsigned long entry_point);
+	void (*send_ipi)(unsigned int cpu, unsigned int message);
+	int (*cpu_disable)(unsigned int cpu);
+	void (*cpu_die)(unsigned int cpu);
+	void (*play_dead)(void);
+};
+
+extern struct plat_smp_ops *mp_ops;
+extern struct plat_smp_ops shx3_smp_ops;
+
+#ifdef CONFIG_SMP
+
+static inline void plat_smp_setup(void)
+{
+	BUG_ON(!mp_ops);
+	mp_ops->smp_setup();
+}
+
+static inline void play_dead(void)
+{
+	mp_ops->play_dead();
+}
+
+extern void register_smp_ops(struct plat_smp_ops *ops);
+
+#else
+
+static inline void plat_smp_setup(void)
+{
+	/* UP, nothing to do ... */
+}
+
+static inline void register_smp_ops(struct plat_smp_ops *ops)
+{
+}
+
+static inline void play_dead(void)
+{
+	BUG();
+}
+
+#endif /* CONFIG_SMP */
+
+#endif /* __ASM_SH_SMP_OPS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/smp.h b/src/kernel/linux/v4.14/arch/sh/include/asm/smp.h
new file mode 100644
index 0000000..1a0d7cf
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/smp.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SMP_H
+#define __ASM_SH_SMP_H
+
+#include <linux/bitops.h>
+#include <linux/cpumask.h>
+#include <asm/smp-ops.h>
+
+#ifdef CONFIG_SMP
+
+#include <linux/spinlock.h>
+#include <linux/atomic.h>
+#include <asm/current.h>
+#include <asm/percpu.h>
+
+#define raw_smp_processor_id()	(current_thread_info()->cpu)
+
+/* Map from cpu id to sequential logical cpu number. */
+extern int __cpu_number_map[NR_CPUS];
+#define cpu_number_map(cpu)  __cpu_number_map[cpu]
+
+/* The reverse map from sequential logical cpu number to cpu id.  */
+extern int __cpu_logical_map[NR_CPUS];
+#define cpu_logical_map(cpu)  __cpu_logical_map[cpu]
+
+enum {
+	SMP_MSG_FUNCTION,
+	SMP_MSG_RESCHEDULE,
+	SMP_MSG_FUNCTION_SINGLE,
+	SMP_MSG_TIMER,
+
+	SMP_MSG_NR,	/* must be last */
+};
+
+DECLARE_PER_CPU(int, cpu_state);
+
+void smp_message_recv(unsigned int msg);
+
+void arch_send_call_function_single_ipi(int cpu);
+void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+
+void native_play_dead(void);
+void native_cpu_die(unsigned int cpu);
+int native_cpu_disable(unsigned int cpu);
+
+#ifdef CONFIG_HOTPLUG_CPU
+void play_dead_common(void);
+extern int __cpu_disable(void);
+
+static inline void __cpu_die(unsigned int cpu)
+{
+	extern struct plat_smp_ops *mp_ops;     /* private */
+
+	mp_ops->cpu_die(cpu);
+}
+#endif
+
+static inline int hard_smp_processor_id(void)
+{
+	extern struct plat_smp_ops *mp_ops;	/* private */
+
+	if (!mp_ops)
+		return 0;	/* boot CPU */
+
+	return mp_ops->smp_processor_id();
+}
+
+struct of_cpu_method {
+	const char *method;
+	struct plat_smp_ops *ops;
+};
+
+#define CPU_METHOD_OF_DECLARE(name, _method, _ops)			\
+	static const struct of_cpu_method __cpu_method_of_table_##name	\
+		__used __section(__cpu_method_of_table)			\
+		= { .method = _method, .ops = _ops }
+
+#else
+
+#define hard_smp_processor_id()	(0)
+
+#endif /* CONFIG_SMP */
+
+#endif /* __ASM_SH_SMP_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/sparsemem.h b/src/kernel/linux/v4.14/arch/sh/include/asm/sparsemem.h
new file mode 100644
index 0000000..4eb8997
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/sparsemem.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SPARSEMEM_H
+#define __ASM_SH_SPARSEMEM_H
+
+#ifdef __KERNEL__
+/*
+ * SECTION_SIZE_BITS		2^N: how big each section will be
+ * MAX_PHYSADDR_BITS		2^N: how much physical address space we have
+ * MAX_PHYSMEM_BITS		2^N: how much memory we can have in that space
+ */
+#define SECTION_SIZE_BITS	26
+#define MAX_PHYSADDR_BITS	32
+#define MAX_PHYSMEM_BITS	32
+
+#endif
+
+#endif /* __ASM_SH_SPARSEMEM_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/spi.h b/src/kernel/linux/v4.14/arch/sh/include/asm/spi.h
new file mode 100644
index 0000000..6780753
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/spi.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SPI_H__
+#define __ASM_SPI_H__
+
+struct sh_spi_info;
+
+struct sh_spi_info {
+	int			 bus_num;
+	int			 num_chipselect;
+
+	void (*chip_select)(struct sh_spi_info *spi, int cs, int state);
+};
+
+#endif /* __ASM_SPI_H__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/spinlock-cas.h b/src/kernel/linux/v4.14/arch/sh/include/asm/spinlock-cas.h
new file mode 100644
index 0000000..5ed7dbb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/spinlock-cas.h
@@ -0,0 +1,112 @@
+/*
+ * include/asm-sh/spinlock-cas.h
+ *
+ * Copyright (C) 2015 SEI
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_SPINLOCK_CAS_H
+#define __ASM_SH_SPINLOCK_CAS_H
+
+#include <asm/barrier.h>
+#include <asm/processor.h>
+
+static inline unsigned __sl_cas(volatile unsigned *p, unsigned old, unsigned new)
+{
+	__asm__ __volatile__("cas.l %1,%0,@r0"
+		: "+r"(new)
+		: "r"(old), "z"(p)
+		: "t", "memory" );
+	return new;
+}
+
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ */
+
+#define arch_spin_is_locked(x)		((x)->lock <= 0)
+#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
+
+static inline void arch_spin_lock(arch_spinlock_t *lock)
+{
+	while (!__sl_cas(&lock->lock, 1, 0));
+}
+
+static inline void arch_spin_unlock(arch_spinlock_t *lock)
+{
+	__sl_cas(&lock->lock, 0, 1);
+}
+
+static inline int arch_spin_trylock(arch_spinlock_t *lock)
+{
+	return __sl_cas(&lock->lock, 1, 0);
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts but no interrupt
+ * writers. For those circumstances we can "mix" irq-safe locks - any writer
+ * needs to get a irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+
+/**
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define arch_read_can_lock(x)	((x)->lock > 0)
+
+/**
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define arch_write_can_lock(x)	((x)->lock == RW_LOCK_BIAS)
+
+static inline void arch_read_lock(arch_rwlock_t *rw)
+{
+	unsigned old;
+	do old = rw->lock;
+	while (!old || __sl_cas(&rw->lock, old, old-1) != old);
+}
+
+static inline void arch_read_unlock(arch_rwlock_t *rw)
+{
+	unsigned old;
+	do old = rw->lock;
+	while (__sl_cas(&rw->lock, old, old+1) != old);
+}
+
+static inline void arch_write_lock(arch_rwlock_t *rw)
+{
+	while (__sl_cas(&rw->lock, RW_LOCK_BIAS, 0) != RW_LOCK_BIAS);
+}
+
+static inline void arch_write_unlock(arch_rwlock_t *rw)
+{
+	__sl_cas(&rw->lock, 0, RW_LOCK_BIAS);
+}
+
+static inline int arch_read_trylock(arch_rwlock_t *rw)
+{
+	unsigned old;
+	do old = rw->lock;
+	while (old && __sl_cas(&rw->lock, old, old-1) != old);
+	return !!old;
+}
+
+static inline int arch_write_trylock(arch_rwlock_t *rw)
+{
+	return __sl_cas(&rw->lock, RW_LOCK_BIAS, 0) == RW_LOCK_BIAS;
+}
+
+#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
+#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
+
+#define arch_spin_relax(lock)	cpu_relax()
+#define arch_read_relax(lock)	cpu_relax()
+#define arch_write_relax(lock)	cpu_relax()
+
+#endif /* __ASM_SH_SPINLOCK_CAS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/spinlock-llsc.h b/src/kernel/linux/v4.14/arch/sh/include/asm/spinlock-llsc.h
new file mode 100644
index 0000000..f77263a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/spinlock-llsc.h
@@ -0,0 +1,219 @@
+/*
+ * include/asm-sh/spinlock-llsc.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ * Copyright (C) 2006, 2007 Akio Idehara
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_SPINLOCK_LLSC_H
+#define __ASM_SH_SPINLOCK_LLSC_H
+
+#include <asm/barrier.h>
+#include <asm/processor.h>
+
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ */
+
+#define arch_spin_is_locked(x)		((x)->lock <= 0)
+#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
+
+/*
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions.  They have a cost.
+ */
+static inline void arch_spin_lock(arch_spinlock_t *lock)
+{
+	unsigned long tmp;
+	unsigned long oldval;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%2, %0	! arch_spin_lock	\n\t"
+		"mov		%0, %1				\n\t"
+		"mov		#0, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
+		"bf		1b				\n\t"
+		"cmp/pl		%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp), "=&r" (oldval)
+		: "r" (&lock->lock)
+		: "t", "memory"
+	);
+}
+
+static inline void arch_spin_unlock(arch_spinlock_t *lock)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"mov		#1, %0 ! arch_spin_unlock	\n\t"
+		"mov.l		%0, @%1				\n\t"
+		: "=&z" (tmp)
+		: "r" (&lock->lock)
+		: "t", "memory"
+	);
+}
+
+static inline int arch_spin_trylock(arch_spinlock_t *lock)
+{
+	unsigned long tmp, oldval;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%2, %0	! arch_spin_trylock	\n\t"
+		"mov		%0, %1				\n\t"
+		"mov		#0, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
+		"bf		1b				\n\t"
+		"synco						\n\t"
+		: "=&z" (tmp), "=&r" (oldval)
+		: "r" (&lock->lock)
+		: "t", "memory"
+	);
+
+	return oldval;
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts but no interrupt
+ * writers. For those circumstances we can "mix" irq-safe locks - any writer
+ * needs to get a irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+
+/**
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define arch_read_can_lock(x)	((x)->lock > 0)
+
+/**
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define arch_write_can_lock(x)	((x)->lock == RW_LOCK_BIAS)
+
+static inline void arch_read_lock(arch_rwlock_t *rw)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! arch_read_lock	\n\t"
+		"cmp/pl		%0				\n\t"
+		"bf		1b				\n\t"
+		"add		#-1, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp)
+		: "r" (&rw->lock)
+		: "t", "memory"
+	);
+}
+
+static inline void arch_read_unlock(arch_rwlock_t *rw)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! arch_read_unlock	\n\t"
+		"add		#1, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp)
+		: "r" (&rw->lock)
+		: "t", "memory"
+	);
+}
+
+static inline void arch_write_lock(arch_rwlock_t *rw)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! arch_write_lock	\n\t"
+		"cmp/hs		%2, %0				\n\t"
+		"bf		1b				\n\t"
+		"sub		%2, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp)
+		: "r" (&rw->lock), "r" (RW_LOCK_BIAS)
+		: "t", "memory"
+	);
+}
+
+static inline void arch_write_unlock(arch_rwlock_t *rw)
+{
+	__asm__ __volatile__ (
+		"mov.l		%1, @%0 ! arch_write_unlock	\n\t"
+		:
+		: "r" (&rw->lock), "r" (RW_LOCK_BIAS)
+		: "t", "memory"
+	);
+}
+
+static inline int arch_read_trylock(arch_rwlock_t *rw)
+{
+	unsigned long tmp, oldval;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%2, %0	! arch_read_trylock	\n\t"
+		"mov		%0, %1				\n\t"
+		"cmp/pl		%0				\n\t"
+		"bf		2f				\n\t"
+		"add		#-1, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
+		"bf		1b				\n\t"
+		"2:						\n\t"
+		"synco						\n\t"
+		: "=&z" (tmp), "=&r" (oldval)
+		: "r" (&rw->lock)
+		: "t", "memory"
+	);
+
+	return (oldval > 0);
+}
+
+static inline int arch_write_trylock(arch_rwlock_t *rw)
+{
+	unsigned long tmp, oldval;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%2, %0	! arch_write_trylock	\n\t"
+		"mov		%0, %1				\n\t"
+		"cmp/hs		%3, %0				\n\t"
+		"bf		2f				\n\t"
+		"sub		%3, %0				\n\t"
+		"2:						\n\t"
+		"movco.l	%0, @%2				\n\t"
+		"bf		1b				\n\t"
+		"synco						\n\t"
+		: "=&z" (tmp), "=&r" (oldval)
+		: "r" (&rw->lock), "r" (RW_LOCK_BIAS)
+		: "t", "memory"
+	);
+
+	return (oldval > (RW_LOCK_BIAS - 1));
+}
+
+#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
+#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
+
+#define arch_spin_relax(lock)	cpu_relax()
+#define arch_read_relax(lock)	cpu_relax()
+#define arch_write_relax(lock)	cpu_relax()
+
+#endif /* __ASM_SH_SPINLOCK_LLSC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/spinlock.h b/src/kernel/linux/v4.14/arch/sh/include/asm/spinlock.h
new file mode 100644
index 0000000..c2c61ea
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/spinlock.h
@@ -0,0 +1,22 @@
+/*
+ * include/asm-sh/spinlock.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ * Copyright (C) 2006, 2007 Akio Idehara
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_SPINLOCK_H
+#define __ASM_SH_SPINLOCK_H
+
+#if defined(CONFIG_CPU_SH4A)
+#include <asm/spinlock-llsc.h>
+#elif defined(CONFIG_CPU_J2)
+#include <asm/spinlock-cas.h>
+#else
+#error "The configured cpu type does not support spinlocks"
+#endif
+
+#endif /* __ASM_SH_SPINLOCK_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/spinlock_types.h b/src/kernel/linux/v4.14/arch/sh/include/asm/spinlock_types.h
new file mode 100644
index 0000000..e82369f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/spinlock_types.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SPINLOCK_TYPES_H
+#define __ASM_SH_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned int lock;
+} arch_spinlock_t;
+
+#define __ARCH_SPIN_LOCK_UNLOCKED		{ 1 }
+
+typedef struct {
+	volatile unsigned int lock;
+} arch_rwlock_t;
+
+#define RW_LOCK_BIAS			0x01000000
+#define __ARCH_RW_LOCK_UNLOCKED		{ RW_LOCK_BIAS }
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/sram.h b/src/kernel/linux/v4.14/arch/sh/include/asm/sram.h
new file mode 100644
index 0000000..c125cf2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/sram.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SRAM_H
+#define __ASM_SRAM_H
+
+#ifdef CONFIG_HAVE_SRAM_POOL
+
+#include <linux/spinlock.h>
+#include <linux/genalloc.h>
+
+/* arch/sh/mm/sram.c */
+extern struct gen_pool *sram_pool;
+
+static inline unsigned long sram_alloc(size_t len)
+{
+	if (!sram_pool)
+		return 0UL;
+
+	return gen_pool_alloc(sram_pool, len);
+}
+
+static inline void sram_free(unsigned long addr, size_t len)
+{
+	return gen_pool_free(sram_pool, addr, len);
+}
+
+#else
+
+static inline unsigned long sram_alloc(size_t len)
+{
+	return 0;
+}
+
+static inline void sram_free(unsigned long addr, size_t len)
+{
+}
+
+#endif /* CONFIG_HAVE_SRAM_POOL */
+
+#endif /* __ASM_SRAM_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/stackprotector.h b/src/kernel/linux/v4.14/arch/sh/include/asm/stackprotector.h
new file mode 100644
index 0000000..3561684
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/stackprotector.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_STACKPROTECTOR_H
+#define __ASM_SH_STACKPROTECTOR_H
+
+#include <linux/random.h>
+#include <linux/version.h>
+
+extern unsigned long __stack_chk_guard;
+
+/*
+ * Initialize the stackprotector canary value.
+ *
+ * NOTE: this must only be called from functions that never return,
+ * and it must always be inlined.
+ */
+static __always_inline void boot_init_stack_canary(void)
+{
+	unsigned long canary;
+
+	/* Try to get a semi random initial value. */
+	get_random_bytes(&canary, sizeof(canary));
+	canary ^= LINUX_VERSION_CODE;
+	canary &= CANARY_MASK;
+
+	current->stack_canary = canary;
+	__stack_chk_guard = current->stack_canary;
+}
+
+#endif /* __ASM_SH_STACKPROTECTOR_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/stacktrace.h b/src/kernel/linux/v4.14/arch/sh/include/asm/stacktrace.h
new file mode 100644
index 0000000..50c173c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/stacktrace.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2009  Matt Fleming
+ *
+ * Based on:
+ *	The x86 implementation - arch/x86/include/asm/stacktrace.h
+ */
+#ifndef _ASM_SH_STACKTRACE_H
+#define _ASM_SH_STACKTRACE_H
+
+/* Generic stack tracer with callbacks */
+
+struct stacktrace_ops {
+	void (*address)(void *data, unsigned long address, int reliable);
+	/* On negative return stop dumping */
+	int (*stack)(void *data, char *name);
+};
+
+void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
+		unsigned long *stack,
+		const struct stacktrace_ops *ops, void *data);
+
+#endif /* _ASM_SH_STACKTRACE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/string.h b/src/kernel/linux/v4.14/arch/sh/include/asm/string.h
new file mode 100644
index 0000000..84fc5ed
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/string.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifdef CONFIG_SUPERH32
+# include <asm/string_32.h>
+#else
+# include <asm/string_64.h>
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/string_32.h b/src/kernel/linux/v4.14/arch/sh/include/asm/string_32.h
new file mode 100644
index 0000000..55f8db6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/string_32.h
@@ -0,0 +1,131 @@
+#ifndef __ASM_SH_STRING_H
+#define __ASM_SH_STRING_H
+
+#ifdef __KERNEL__
+
+/*
+ * Copyright (C) 1999 Niibe Yutaka
+ * But consider these trivial functions to be public domain.
+ */
+
+#define __HAVE_ARCH_STRCPY
+static inline char *strcpy(char *__dest, const char *__src)
+{
+	register char *__xdest = __dest;
+	unsigned long __dummy;
+
+	__asm__ __volatile__("1:\n\t"
+			     "mov.b	@%1+, %2\n\t"
+			     "mov.b	%2, @%0\n\t"
+			     "cmp/eq	#0, %2\n\t"
+			     "bf/s	1b\n\t"
+			     " add	#1, %0\n\t"
+			     : "=r" (__dest), "=r" (__src), "=&z" (__dummy)
+			     : "0" (__dest), "1" (__src)
+			     : "memory", "t");
+
+	return __xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static inline char *strncpy(char *__dest, const char *__src, size_t __n)
+{
+	register char *__xdest = __dest;
+	unsigned long __dummy;
+
+	if (__n == 0)
+		return __xdest;
+
+	__asm__ __volatile__(
+		"1:\n"
+		"mov.b	@%1+, %2\n\t"
+		"mov.b	%2, @%0\n\t"
+		"cmp/eq	#0, %2\n\t"
+		"bt/s	2f\n\t"
+		" cmp/eq	%5,%1\n\t"
+		"bf/s	1b\n\t"
+		" add	#1, %0\n"
+		"2:"
+		: "=r" (__dest), "=r" (__src), "=&z" (__dummy)
+		: "0" (__dest), "1" (__src), "r" (__src+__n)
+		: "memory", "t");
+
+	return __xdest;
+}
+
+#define __HAVE_ARCH_STRCMP
+static inline int strcmp(const char *__cs, const char *__ct)
+{
+	register int __res;
+	unsigned long __dummy;
+
+	__asm__ __volatile__(
+		"mov.b	@%1+, %3\n"
+		"1:\n\t"
+		"mov.b	@%0+, %2\n\t"
+		"cmp/eq #0, %3\n\t"
+		"bt	2f\n\t"
+		"cmp/eq %2, %3\n\t"
+		"bt/s	1b\n\t"
+		" mov.b	@%1+, %3\n\t"
+		"add	#-2, %1\n\t"
+		"mov.b	@%1, %3\n\t"
+		"sub	%3, %2\n"
+		"2:"
+		: "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
+		: "0" (__cs), "1" (__ct)
+		: "t");
+
+	return __res;
+}
+
+#define __HAVE_ARCH_STRNCMP
+static inline int strncmp(const char *__cs, const char *__ct, size_t __n)
+{
+	register int __res;
+	unsigned long __dummy;
+
+	if (__n == 0)
+		return 0;
+
+	__asm__ __volatile__(
+		"mov.b	@%1+, %3\n"
+		"1:\n\t"
+		"mov.b	@%0+, %2\n\t"
+		"cmp/eq %6, %0\n\t"
+		"bt/s	2f\n\t"
+		" cmp/eq #0, %3\n\t"
+		"bt/s	3f\n\t"
+		" cmp/eq %3, %2\n\t"
+		"bt/s	1b\n\t"
+		" mov.b	@%1+, %3\n\t"
+		"add	#-2, %1\n\t"
+		"mov.b	@%1, %3\n"
+		"2:\n\t"
+		"sub	%3, %2\n"
+		"3:"
+		:"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
+		: "0" (__cs), "1" (__ct), "r" (__cs+__n)
+		: "t");
+
+	return __res;
+}
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *__s, int __c, size_t __count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+
+#define __HAVE_ARCH_MEMCHR
+extern void *memchr(const void *__s, int __c, size_t __n);
+
+#define __HAVE_ARCH_STRLEN
+extern size_t strlen(const char *);
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_STRING_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/string_64.h b/src/kernel/linux/v4.14/arch/sh/include/asm/string_64.h
new file mode 100644
index 0000000..d51d615
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/string_64.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_STRING_64_H
+#define __ASM_SH_STRING_64_H
+
+#ifdef __KERNEL__
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *__s, int __c, size_t __count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *dest, const void *src, size_t count);
+
+#define __HAVE_ARCH_STRLEN
+extern size_t strlen(const char *);
+
+#define __HAVE_ARCH_STRCPY
+extern char *strcpy(char *__dest, const char *__src);
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_STRING_64_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/suspend.h b/src/kernel/linux/v4.14/arch/sh/include/asm/suspend.h
new file mode 100644
index 0000000..47db175
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/suspend.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_SH_SUSPEND_H
+#define _ASM_SH_SUSPEND_H
+
+#ifndef __ASSEMBLY__
+#include <linux/notifier.h>
+
+#include <asm/ptrace.h>
+
+struct swsusp_arch_regs {
+	struct pt_regs user_regs;
+	unsigned long bank1_regs[8];
+};
+
+void sh_mobile_call_standby(unsigned long mode);
+
+#ifdef CONFIG_CPU_IDLE
+int sh_mobile_setup_cpuidle(void);
+#else
+static inline int sh_mobile_setup_cpuidle(void) { return 0; }
+#endif
+
+/* notifier chains for pre/post sleep hooks */
+extern struct atomic_notifier_head sh_mobile_pre_sleep_notifier_list;
+extern struct atomic_notifier_head sh_mobile_post_sleep_notifier_list;
+
+/* priority levels for notifiers */
+#define SH_MOBILE_SLEEP_BOARD	0
+#define SH_MOBILE_SLEEP_CPU	1
+#define SH_MOBILE_PRE(x)	(x)
+#define SH_MOBILE_POST(x)	(-(x))
+
+/* board code registration function for self-refresh assembly snippets */
+void sh_mobile_register_self_refresh(unsigned long flags,
+				     void *pre_start, void *pre_end,
+				     void *post_start, void *post_end);
+
+/* register structure for address/data information */
+struct sh_sleep_regs {
+	unsigned long stbcr;
+	unsigned long bar;
+
+	/* MMU */
+	unsigned long pteh;
+	unsigned long ptel;
+	unsigned long ttb;
+	unsigned long tea;
+	unsigned long mmucr;
+	unsigned long ptea;
+	unsigned long pascr;
+	unsigned long irmcr;
+
+	/* Cache */
+	unsigned long ccr;
+	unsigned long ramcr;
+};
+
+/* data area for low-level sleep code */
+struct sh_sleep_data {
+	/* current sleep mode (SUSP_SH_...) */
+	unsigned long mode;
+
+	/* addresses of board specific self-refresh snippets */
+	unsigned long sf_pre;
+	unsigned long sf_post;
+
+	/* address of resume code */
+	unsigned long resume;
+
+	/* register state saved and restored by the assembly code */
+	unsigned long vbr;
+	unsigned long spc;
+	unsigned long sr;
+	unsigned long sp;
+
+	/* structure for keeping register addresses */
+	struct sh_sleep_regs addr;
+
+	/* structure for saving/restoring register state */
+	struct sh_sleep_regs data;
+};
+
+/* a bitmap of supported sleep modes (SUSP_SH..) */
+extern unsigned long sh_mobile_sleep_supported;
+
+#endif
+
+/* flags passed to assembly suspend code */
+#define SUSP_SH_SLEEP		(1 << 0) /* Regular sleep mode */
+#define SUSP_SH_STANDBY		(1 << 1) /* SH-Mobile Software standby mode */
+#define SUSP_SH_RSTANDBY	(1 << 2) /* SH-Mobile R-standby mode */
+#define SUSP_SH_USTANDBY	(1 << 3) /* SH-Mobile U-standby mode */
+#define SUSP_SH_SF		(1 << 4) /* Enable self-refresh */
+#define SUSP_SH_MMU		(1 << 5) /* Save/restore MMU and cache */
+#define SUSP_SH_REGS		(1 << 6) /* Save/restore registers */
+
+#endif /* _ASM_SH_SUSPEND_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/switch_to.h b/src/kernel/linux/v4.14/arch/sh/include/asm/switch_to.h
new file mode 100644
index 0000000..bcd722f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/switch_to.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_SWITCH_TO_H
+#define __ASM_SH_SWITCH_TO_H
+
+#ifdef CONFIG_SUPERH32
+# include <asm/switch_to_32.h>
+#else
+# include <asm/switch_to_64.h>
+#endif
+
+#endif /* __ASM_SH_SWITCH_TO_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/switch_to_32.h b/src/kernel/linux/v4.14/arch/sh/include/asm/switch_to_32.h
new file mode 100644
index 0000000..9c93fb9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/switch_to_32.h
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SWITCH_TO_32_H
+#define __ASM_SH_SWITCH_TO_32_H
+
+#ifdef CONFIG_SH_DSP
+
+#define is_dsp_enabled(tsk)						\
+	(!!(tsk->thread.dsp_status.status & SR_DSP))
+
+#define __restore_dsp(tsk)						\
+do {									\
+	register u32 *__ts2 __asm__ ("r2") =				\
+			(u32 *)&tsk->thread.dsp_status;			\
+	__asm__ __volatile__ (						\
+		".balign 4\n\t"						\
+		"movs.l	@r2+, a0\n\t"					\
+		"movs.l	@r2+, a1\n\t"					\
+		"movs.l	@r2+, a0g\n\t"					\
+		"movs.l	@r2+, a1g\n\t"					\
+		"movs.l	@r2+, m0\n\t"					\
+		"movs.l	@r2+, m1\n\t"					\
+		"movs.l	@r2+, x0\n\t"					\
+		"movs.l	@r2+, x1\n\t"					\
+		"movs.l	@r2+, y0\n\t"					\
+		"movs.l	@r2+, y1\n\t"					\
+		"lds.l	@r2+, dsr\n\t"					\
+		"ldc.l	@r2+, rs\n\t"					\
+		"ldc.l	@r2+, re\n\t"					\
+		"ldc.l	@r2+, mod\n\t"					\
+		: : "r" (__ts2));					\
+} while (0)
+
+#define __save_dsp(tsk)							\
+do {									\
+	register u32 *__ts2 __asm__ ("r2") =				\
+			(u32 *)&tsk->thread.dsp_status + 14;		\
+									\
+	__asm__ __volatile__ (						\
+		".balign 4\n\t"						\
+		"stc.l	mod, @-r2\n\t"					\
+		"stc.l	re, @-r2\n\t"					\
+		"stc.l	rs, @-r2\n\t"					\
+		"sts.l	dsr, @-r2\n\t"					\
+		"movs.l	y1, @-r2\n\t"					\
+		"movs.l	y0, @-r2\n\t"					\
+		"movs.l	x1, @-r2\n\t"					\
+		"movs.l	x0, @-r2\n\t"					\
+		"movs.l	m1, @-r2\n\t"					\
+		"movs.l	m0, @-r2\n\t"					\
+		"movs.l	a1g, @-r2\n\t"					\
+		"movs.l	a0g, @-r2\n\t"					\
+		"movs.l	a1, @-r2\n\t"					\
+		"movs.l	a0, @-r2\n\t"					\
+		: : "r" (__ts2));					\
+} while (0)
+
+#else
+
+#define is_dsp_enabled(tsk)	(0)
+#define __save_dsp(tsk)		do { } while (0)
+#define __restore_dsp(tsk)	do { } while (0)
+#endif
+
+struct task_struct *__switch_to(struct task_struct *prev,
+				struct task_struct *next);
+
+/*
+ *	switch_to() should switch tasks to task nr n, first
+ */
+#define switch_to(prev, next, last)				\
+do {								\
+	register u32 *__ts1 __asm__ ("r1");			\
+	register u32 *__ts2 __asm__ ("r2");			\
+	register u32 *__ts4 __asm__ ("r4");			\
+	register u32 *__ts5 __asm__ ("r5");			\
+	register u32 *__ts6 __asm__ ("r6");			\
+	register u32 __ts7 __asm__ ("r7");			\
+	struct task_struct *__last;				\
+								\
+	if (is_dsp_enabled(prev))				\
+		__save_dsp(prev);				\
+	if (is_dsp_enabled(next))				\
+		__restore_dsp(next);				\
+								\
+	__ts1 = (u32 *)&prev->thread.sp;			\
+	__ts2 = (u32 *)&prev->thread.pc;			\
+	__ts4 = (u32 *)prev;					\
+	__ts5 = (u32 *)next;					\
+	__ts6 = (u32 *)&next->thread.sp;			\
+	__ts7 = next->thread.pc;				\
+								\
+	__asm__ __volatile__ (					\
+		".balign 4\n\t"					\
+		"stc.l	gbr, @-r15\n\t"				\
+		"sts.l	pr, @-r15\n\t"				\
+		"mov.l	r8, @-r15\n\t"				\
+		"mov.l	r9, @-r15\n\t"				\
+		"mov.l	r10, @-r15\n\t"				\
+		"mov.l	r11, @-r15\n\t"				\
+		"mov.l	r12, @-r15\n\t"				\
+		"mov.l	r13, @-r15\n\t"				\
+		"mov.l	r14, @-r15\n\t"				\
+		"mov.l	r15, @r1\t! save SP\n\t"		\
+		"mov.l	@r6, r15\t! change to new stack\n\t"	\
+		"mova	1f, %0\n\t"				\
+		"mov.l	%0, @r2\t! save PC\n\t"			\
+		"mov.l	2f, %0\n\t"				\
+		"jmp	@%0\t! call __switch_to\n\t"		\
+		" lds	r7, pr\t!  with return to new PC\n\t"	\
+		".balign	4\n"				\
+		"2:\n\t"					\
+		".long	__switch_to\n"				\
+		"1:\n\t"					\
+		"mov.l	@r15+, r14\n\t"				\
+		"mov.l	@r15+, r13\n\t"				\
+		"mov.l	@r15+, r12\n\t"				\
+		"mov.l	@r15+, r11\n\t"				\
+		"mov.l	@r15+, r10\n\t"				\
+		"mov.l	@r15+, r9\n\t"				\
+		"mov.l	@r15+, r8\n\t"				\
+		"lds.l	@r15+, pr\n\t"				\
+		"ldc.l	@r15+, gbr\n\t"				\
+		: "=z" (__last)					\
+		: "r" (__ts1), "r" (__ts2), "r" (__ts4),	\
+		  "r" (__ts5), "r" (__ts6), "r" (__ts7)		\
+		: "r3", "t");					\
+								\
+	last = __last;						\
+} while (0)
+
+#endif /* __ASM_SH_SWITCH_TO_32_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/switch_to_64.h b/src/kernel/linux/v4.14/arch/sh/include/asm/switch_to_64.h
new file mode 100644
index 0000000..ba3129d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/switch_to_64.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_SWITCH_TO_64_H
+#define __ASM_SH_SWITCH_TO_64_H
+
+struct thread_struct;
+struct task_struct;
+
+/*
+ *	switch_to() should switch tasks to task nr n, first
+ */
+struct task_struct *sh64_switch_to(struct task_struct *prev,
+				   struct thread_struct *prev_thread,
+				   struct task_struct *next,
+				   struct thread_struct *next_thread);
+
+#define switch_to(prev,next,last)				\
+do {								\
+	if (last_task_used_math != next) {			\
+		struct pt_regs *regs = next->thread.uregs;	\
+		if (regs) regs->sr |= SR_FD;			\
+	}							\
+	last = sh64_switch_to(prev, &prev->thread, next,	\
+			      &next->thread);			\
+} while (0)
+
+
+#endif /* __ASM_SH_SWITCH_TO_64_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/syscall.h b/src/kernel/linux/v4.14/arch/sh/include/asm/syscall.h
new file mode 100644
index 0000000..90ba000
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/syscall.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SYSCALL_H
+#define __ASM_SH_SYSCALL_H
+
+extern const unsigned long sys_call_table[];
+
+#ifdef CONFIG_SUPERH32
+# include <asm/syscall_32.h>
+#else
+# include <asm/syscall_64.h>
+#endif
+
+#endif /* __ASM_SH_SYSCALL_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/syscall_32.h b/src/kernel/linux/v4.14/arch/sh/include/asm/syscall_32.h
new file mode 100644
index 0000000..6e11879
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/syscall_32.h
@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SYSCALL_32_H
+#define __ASM_SH_SYSCALL_32_H
+
+#include <uapi/linux/audit.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <asm/ptrace.h>
+
+/* The system call number is given by the user in R3 */
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	return (regs->tra >= 0) ? regs->regs[3] : -1L;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	/*
+	 * XXX: This needs some thought. On SH we don't
+	 * save away the original r0 value anywhere.
+	 */
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	return IS_ERR_VALUE(regs->regs[0]) ? regs->regs[0] : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->regs[0];
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error)
+		regs->regs[0] = -error;
+	else
+		regs->regs[0] = val;
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	/*
+	 * Do this simply for now. If we need to start supporting
+	 * fetching arguments from arbitrary indices, this will need some
+	 * extra logic. Presently there are no in-tree users that depend
+	 * on this behaviour.
+	 */
+	BUG_ON(i);
+
+	/* Argument pattern is: R4, R5, R6, R7, R0, R1 */
+	switch (n) {
+	case 6: args[5] = regs->regs[1];
+	case 5: args[4] = regs->regs[0];
+	case 4: args[3] = regs->regs[7];
+	case 3: args[2] = regs->regs[6];
+	case 2: args[1] = regs->regs[5];
+	case 1:	args[0] = regs->regs[4];
+	case 0:
+		break;
+	default:
+		BUG();
+	}
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	/* Same note as above applies */
+	BUG_ON(i);
+
+	switch (n) {
+	case 6: regs->regs[1] = args[5];
+	case 5: regs->regs[0] = args[4];
+	case 4: regs->regs[7] = args[3];
+	case 3: regs->regs[6] = args[2];
+	case 2: regs->regs[5] = args[1];
+	case 1: regs->regs[4] = args[0];
+		break;
+	default:
+		BUG();
+	}
+}
+
+static inline int syscall_get_arch(void)
+{
+	int arch = AUDIT_ARCH_SH;
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	arch |= __AUDIT_ARCH_LE;
+#endif
+	return arch;
+}
+#endif /* __ASM_SH_SYSCALL_32_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/syscall_64.h b/src/kernel/linux/v4.14/arch/sh/include/asm/syscall_64.h
new file mode 100644
index 0000000..4388258
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/syscall_64.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SYSCALL_64_H
+#define __ASM_SH_SYSCALL_64_H
+
+#include <uapi/linux/audit.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+/* The system call number is given by the user in R9 */
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	return (regs->syscall_nr >= 0) ? regs->regs[9] : -1L;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	/*
+	 * XXX: This needs some thought. On SH we don't
+	 * save away the original R9 value anywhere.
+	 */
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	return IS_ERR_VALUE(regs->regs[9]) ? regs->regs[9] : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->regs[9];
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error)
+		regs->regs[9] = -error;
+	else
+		regs->regs[9] = val;
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+	memcpy(args, &regs->regs[2 + i], n * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+	memcpy(&regs->regs[2 + i], args, n * sizeof(args[0]));
+}
+
+static inline int syscall_get_arch(void)
+{
+	int arch = AUDIT_ARCH_SH;
+
+#ifdef CONFIG_64BIT
+	arch |= __AUDIT_ARCH_64BIT;
+#endif
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	arch |= __AUDIT_ARCH_LE;
+#endif
+
+	return arch;
+}
+#endif /* __ASM_SH_SYSCALL_64_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/syscalls.h b/src/kernel/linux/v4.14/arch/sh/include/asm/syscalls.h
new file mode 100644
index 0000000..995ef04
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/syscalls.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SYSCALLS_H
+#define __ASM_SH_SYSCALLS_H
+
+#ifdef __KERNEL__
+
+asmlinkage int old_mmap(unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			int fd, unsigned long off);
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+			  unsigned long prot, unsigned long flags,
+			  unsigned long fd, unsigned long pgoff);
+
+#ifdef CONFIG_SUPERH32
+# include <asm/syscalls_32.h>
+#else
+# include <asm/syscalls_64.h>
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_SYSCALLS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/syscalls_32.h b/src/kernel/linux/v4.14/arch/sh/include/asm/syscalls_32.h
new file mode 100644
index 0000000..9f9faf6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/syscalls_32.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SYSCALLS_32_H
+#define __ASM_SH_SYSCALLS_32_H
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+
+struct pt_regs;
+
+asmlinkage int sys_sigreturn(void);
+asmlinkage int sys_rt_sigreturn(void);
+asmlinkage int sys_sh_pipe(void);
+asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char __user *buf,
+				     size_t count, long dummy, loff_t pos);
+asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char __user *buf,
+				      size_t count, long dummy, loff_t pos);
+asmlinkage int sys_fadvise64_64_wrapper(int fd, u32 offset0, u32 offset1,
+					u32 len0, u32 len1, int advice);
+
+/* Misc syscall related bits */
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs);
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
+asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
+				 unsigned long thread_info_flags);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_SYSCALLS_32_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/syscalls_64.h b/src/kernel/linux/v4.14/arch/sh/include/asm/syscalls_64.h
new file mode 100644
index 0000000..df42656c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/syscalls_64.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SYSCALLS_64_H
+#define __ASM_SH_SYSCALLS_64_H
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+
+struct pt_regs;
+
+/* Misc syscall related bits */
+asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs);
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_SYSCALLS_64_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/thread_info.h b/src/kernel/linux/v4.14/arch/sh/include/asm/thread_info.h
new file mode 100644
index 0000000..becb798
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/thread_info.h
@@ -0,0 +1,181 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_THREAD_INFO_H
+#define __ASM_SH_THREAD_INFO_H
+
+/* SuperH version
+ * Copyright (C) 2002  Niibe Yutaka
+ *
+ * The copyright of original i386 version is:
+ *
+ *  Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ *  - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+#ifdef __KERNEL__
+
+#include <asm/page.h>
+
+/*
+ * Page fault error code bits
+ */
+#define FAULT_CODE_WRITE	(1 << 0)	/* write access */
+#define FAULT_CODE_INITIAL	(1 << 1)	/* initial page write */
+#define FAULT_CODE_ITLB		(1 << 2)	/* ITLB miss */
+#define FAULT_CODE_PROT		(1 << 3)	/* protection fault */
+#define FAULT_CODE_USER		(1 << 4)	/* user-mode access */
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	unsigned long		flags;		/* low level flags */
+	__u32			status;		/* thread synchronous flags */
+	__u32			cpu;
+	int			preempt_count; /* 0 => preemptable, <0 => BUG */
+	mm_segment_t		addr_limit;	/* thread address space */
+	unsigned long		previous_sp;	/* sp of previous stack in case
+						   of nested IRQ stacks */
+	__u8			supervisor_stack[0];
+};
+
+#endif
+
+#if defined(CONFIG_4KSTACKS)
+#define THREAD_SHIFT	12
+#else
+#define THREAD_SHIFT	13
+#endif
+
+#define THREAD_SIZE	(1 << THREAD_SHIFT)
+#define STACK_WARN	(THREAD_SIZE >> 3)
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#ifndef __ASSEMBLY__
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.flags		= 0,			\
+	.status		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
+	.addr_limit	= KERNEL_DS,		\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the current stack pointer from C */
+register unsigned long current_stack_pointer asm("r15") __used;
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+#if defined(CONFIG_SUPERH64)
+	__asm__ __volatile__ ("getcon	cr17, %0" : "=r" (ti));
+#elif defined(CONFIG_CPU_HAS_SR_RB)
+	__asm__ __volatile__ ("stc	r7_bank, %0" : "=r" (ti));
+#else
+	unsigned long __dummy;
+
+	__asm__ __volatile__ (
+		"mov	r15, %0\n\t"
+		"and	%1, %0\n\t"
+		: "=&r" (ti), "=r" (__dummy)
+		: "1" (~(THREAD_SIZE - 1))
+		: "memory");
+#endif
+
+	return ti;
+}
+
+#define THREAD_SIZE_ORDER	(THREAD_SHIFT - PAGE_SHIFT)
+
+extern void arch_task_cache_init(void);
+extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
+extern void arch_release_task_struct(struct task_struct *tsk);
+extern void init_thread_xstate(void);
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Thread information flags
+ *
+ * - Limited to 24 bits, upper byte used for fault code encoding.
+ *
+ * - _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within 2 bytes, or
+ *   we blow the tst immediate size constraints and need to fix up
+ *   arch/sh/kernel/entry-common.S.
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_SINGLESTEP		4	/* singlestepping active */
+#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
+#define TIF_SECCOMP		6	/* secure computing */
+#define TIF_NOTIFY_RESUME	7	/* callback before returning to user */
+#define TIF_SYSCALL_TRACEPOINT	8	/* for ftrace syscall instrumentation */
+#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		18	/* is terminating due to OOM killer */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+
+/* work to do in syscall trace */
+#define _TIF_WORK_SYSCALL_MASK	(_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
+				 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP    | \
+				 _TIF_SYSCALL_TRACEPOINT)
+
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK	(_TIF_SYSCALL_TRACE | _TIF_SIGPENDING      | \
+				 _TIF_NEED_RESCHED  | _TIF_SYSCALL_AUDIT   | \
+				 _TIF_SINGLESTEP    | _TIF_NOTIFY_RESUME   | \
+				 _TIF_SYSCALL_TRACEPOINT)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK		(_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
+				 _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP))
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_USEDFPU		0x0002	/* FPU used by this task this quantum */
+
+#ifndef __ASSEMBLY__
+
+#define TI_FLAG_FAULT_CODE_SHIFT	24
+
+/*
+ * Additional thread flag encoding
+ */
+static inline void set_thread_fault_code(unsigned int val)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->flags = (ti->flags & (~0 >> (32 - TI_FLAG_FAULT_CODE_SHIFT)))
+		| (val << TI_FLAG_FAULT_CODE_SHIFT);
+}
+
+static inline unsigned int get_thread_fault_code(void)
+{
+	struct thread_info *ti = current_thread_info();
+	return ti->flags >> TI_FLAG_FAULT_CODE_SHIFT;
+}
+
+#endif	/* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_THREAD_INFO_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/timex.h b/src/kernel/linux/v4.14/arch/sh/include/asm/timex.h
new file mode 100644
index 0000000..f53f95b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/timex.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * linux/include/asm-sh/timex.h
+ *
+ * sh architecture timex specifications
+ */
+#ifndef __ASM_SH_TIMEX_H
+#define __ASM_SH_TIMEX_H
+
+/*
+ * Only parts using the legacy CPG code for their clock framework
+ * implementation need to define their own Pclk value. If provided, this
+ * can be used for accurately setting CLOCK_TICK_RATE, otherwise we
+ * simply fall back on the i8253 PIT value.
+ */
+#ifdef CONFIG_SH_PCLK_FREQ
+#define CLOCK_TICK_RATE		(CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */
+#else
+#define CLOCK_TICK_RATE		1193180
+#endif
+
+#include <asm-generic/timex.h>
+
+#endif /* __ASM_SH_TIMEX_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/tlb.h b/src/kernel/linux/v4.14/arch/sh/include/asm/tlb.h
new file mode 100644
index 0000000..77abe19
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/tlb.h
@@ -0,0 +1,169 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_TLB_H
+#define __ASM_SH_TLB_H
+
+#ifdef CONFIG_SUPERH64
+# include <asm/tlb_64.h>
+#endif
+
+#ifndef __ASSEMBLY__
+#include <linux/pagemap.h>
+
+#ifdef CONFIG_MMU
+#include <linux/swap.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+
+/*
+ * TLB handling.  This allows us to remove pages from the page
+ * tables, and efficiently handle the TLB issues.
+ */
+struct mmu_gather {
+	struct mm_struct	*mm;
+	unsigned int		fullmm;
+	unsigned long		start, end;
+};
+
+static inline void init_tlb_gather(struct mmu_gather *tlb)
+{
+	tlb->start = TASK_SIZE;
+	tlb->end = 0;
+
+	if (tlb->fullmm) {
+		tlb->start = 0;
+		tlb->end = TASK_SIZE;
+	}
+}
+
+static inline void
+arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm,
+		unsigned long start, unsigned long end)
+{
+	tlb->mm = mm;
+	tlb->start = start;
+	tlb->end = end;
+	tlb->fullmm = !(start | (end+1));
+
+	init_tlb_gather(tlb);
+}
+
+static inline void
+arch_tlb_finish_mmu(struct mmu_gather *tlb,
+		unsigned long start, unsigned long end, bool force)
+{
+	if (tlb->fullmm || force)
+		flush_tlb_mm(tlb->mm);
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+}
+
+static inline void
+tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long address)
+{
+	if (tlb->start > address)
+		tlb->start = address;
+	if (tlb->end < address + PAGE_SIZE)
+		tlb->end = address + PAGE_SIZE;
+}
+
+#define tlb_remove_huge_tlb_entry(h, tlb, ptep, address)	\
+	tlb_remove_tlb_entry(tlb, ptep, address)
+
+/*
+ * In the case of tlb vma handling, we can optimise these away in the
+ * case where we're doing a full MM flush.  When we're doing a munmap,
+ * the vmas are adjusted to only cover the region to be torn down.
+ */
+static inline void
+tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+	if (!tlb->fullmm)
+		flush_cache_range(vma, vma->vm_start, vma->vm_end);
+}
+
+static inline void
+tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+	if (!tlb->fullmm && tlb->end) {
+		flush_tlb_range(vma, tlb->start, tlb->end);
+		init_tlb_gather(tlb);
+	}
+}
+
+static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb)
+{
+}
+
+static inline void tlb_flush_mmu_free(struct mmu_gather *tlb)
+{
+}
+
+static inline void tlb_flush_mmu(struct mmu_gather *tlb)
+{
+}
+
+static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
+{
+	free_page_and_swap_cache(page);
+	return false; /* avoid calling tlb_flush_mmu */
+}
+
+static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
+{
+	__tlb_remove_page(tlb, page);
+}
+
+static inline bool __tlb_remove_page_size(struct mmu_gather *tlb,
+					  struct page *page, int page_size)
+{
+	return __tlb_remove_page(tlb, page);
+}
+
+static inline void tlb_remove_page_size(struct mmu_gather *tlb,
+					struct page *page, int page_size)
+{
+	return tlb_remove_page(tlb, page);
+}
+
+#define tlb_remove_check_page_size_change tlb_remove_check_page_size_change
+static inline void tlb_remove_check_page_size_change(struct mmu_gather *tlb,
+						     unsigned int page_size)
+{
+}
+
+#define pte_free_tlb(tlb, ptep, addr)	pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr)	pmd_free((tlb)->mm, pmdp)
+#define pud_free_tlb(tlb, pudp, addr)	pud_free((tlb)->mm, pudp)
+
+#define tlb_migrate_finish(mm)		do { } while (0)
+
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SUPERH64)
+extern void tlb_wire_entry(struct vm_area_struct *, unsigned long, pte_t);
+extern void tlb_unwire_entry(void);
+#else
+static inline void tlb_wire_entry(struct vm_area_struct *vma ,
+				  unsigned long addr, pte_t pte)
+{
+	BUG();
+}
+
+static inline void tlb_unwire_entry(void)
+{
+	BUG();
+}
+#endif
+
+#else /* CONFIG_MMU */
+
+#define tlb_start_vma(tlb, vma)				do { } while (0)
+#define tlb_end_vma(tlb, vma)				do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, pte, address)	do { } while (0)
+#define tlb_flush(tlb)					do { } while (0)
+
+#include <asm-generic/tlb.h>
+
+#endif /* CONFIG_MMU */
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_TLB_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/tlb_64.h b/src/kernel/linux/v4.14/arch/sh/include/asm/tlb_64.h
new file mode 100644
index 0000000..ef0ae2a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/tlb_64.h
@@ -0,0 +1,71 @@
+/*
+ * include/asm-sh/tlb_64.h
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_TLB_64_H
+#define __ASM_SH_TLB_64_H
+
+/* ITLB defines */
+#define ITLB_FIXED	0x00000000	/* First fixed ITLB, see head.S */
+#define ITLB_LAST_VAR_UNRESTRICTED	0x000003F0	/* Last ITLB */
+
+/* DTLB defines */
+#define DTLB_FIXED	0x00800000	/* First fixed DTLB, see head.S */
+#define DTLB_LAST_VAR_UNRESTRICTED	0x008003F0	/* Last DTLB */
+
+#ifndef __ASSEMBLY__
+
+/**
+ * for_each_dtlb_entry - Iterate over free (non-wired) DTLB entries
+ *
+ * @tlb:	TLB entry
+ */
+#define for_each_dtlb_entry(tlb)		\
+	for (tlb  = cpu_data->dtlb.first;	\
+	     tlb <= cpu_data->dtlb.last;	\
+	     tlb += cpu_data->dtlb.step)
+
+/**
+ * for_each_itlb_entry - Iterate over free (non-wired) ITLB entries
+ *
+ * @tlb:	TLB entry
+ */
+#define for_each_itlb_entry(tlb)		\
+	for (tlb  = cpu_data->itlb.first;	\
+	     tlb <= cpu_data->itlb.last;	\
+	     tlb += cpu_data->itlb.step)
+
+/**
+ * __flush_tlb_slot - Flushes TLB slot @slot.
+ *
+ * @slot:	Address of TLB slot.
+ */
+static inline void __flush_tlb_slot(unsigned long long slot)
+{
+	__asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot));
+}
+
+#ifdef CONFIG_MMU
+/* arch/sh64/mm/tlb.c */
+int sh64_tlb_init(void);
+unsigned long long sh64_next_free_dtlb_entry(void);
+unsigned long long sh64_get_wired_dtlb_entry(void);
+int sh64_put_wired_dtlb_entry(unsigned long long entry);
+void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
+			 unsigned long asid, unsigned long paddr);
+void sh64_teardown_tlb_slot(unsigned long long config_addr);
+#else
+#define sh64_tlb_init()					do { } while (0)
+#define sh64_next_free_dtlb_entry()			(0)
+#define sh64_get_wired_dtlb_entry()			(0)
+#define sh64_put_wired_dtlb_entry(entry)		do { } while (0)
+#define sh64_setup_tlb_slot(conf, virt, asid, phys)	do { } while (0)
+#define sh64_teardown_tlb_slot(addr)			do { } while (0)
+#endif /* CONFIG_MMU */
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_TLB_64_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/tlbflush.h b/src/kernel/linux/v4.14/arch/sh/include/asm/tlbflush.h
new file mode 100644
index 0000000..8f180cd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/tlbflush.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_TLBFLUSH_H
+#define __ASM_SH_TLBFLUSH_H
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ */
+extern void local_flush_tlb_all(void);
+extern void local_flush_tlb_mm(struct mm_struct *mm);
+extern void local_flush_tlb_range(struct vm_area_struct *vma,
+				  unsigned long start,
+				  unsigned long end);
+extern void local_flush_tlb_page(struct vm_area_struct *vma,
+				 unsigned long page);
+extern void local_flush_tlb_kernel_range(unsigned long start,
+					 unsigned long end);
+extern void local_flush_tlb_one(unsigned long asid, unsigned long page);
+
+extern void __flush_tlb_global(void);
+
+#ifdef CONFIG_SMP
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			    unsigned long end);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+extern void flush_tlb_one(unsigned long asid, unsigned long page);
+
+#else
+
+#define flush_tlb_all()			local_flush_tlb_all()
+#define flush_tlb_mm(mm)		local_flush_tlb_mm(mm)
+#define flush_tlb_page(vma, page)	local_flush_tlb_page(vma, page)
+#define flush_tlb_one(asid, page)	local_flush_tlb_one(asid, page)
+
+#define flush_tlb_range(vma, start, end)	\
+	local_flush_tlb_range(vma, start, end)
+
+#define flush_tlb_kernel_range(start, end)	\
+	local_flush_tlb_kernel_range(start, end)
+
+#endif /* CONFIG_SMP */
+
+#endif /* __ASM_SH_TLBFLUSH_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/topology.h b/src/kernel/linux/v4.14/arch/sh/include/asm/topology.h
new file mode 100644
index 0000000..9a32eb4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/topology.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_SH_TOPOLOGY_H
+#define _ASM_SH_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+#define cpu_to_node(cpu)	((void)(cpu),0)
+#define parent_node(node)	((void)(node),0)
+
+#define cpumask_of_node(node)	((void)node, cpu_online_mask)
+
+#define pcibus_to_node(bus)	((void)(bus), -1)
+#define cpumask_of_pcibus(bus)	(pcibus_to_node(bus) == -1 ? \
+					cpu_all_mask : \
+					cpumask_of_node(pcibus_to_node(bus)))
+
+#endif
+
+#define mc_capable()    (1)
+
+const struct cpumask *cpu_coregroup_mask(int cpu);
+
+extern cpumask_t cpu_core_map[NR_CPUS];
+
+#define topology_core_cpumask(cpu)	(&cpu_core_map[cpu])
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_SH_TOPOLOGY_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/traps.h b/src/kernel/linux/v4.14/arch/sh/include/asm/traps.h
new file mode 100644
index 0000000..8844ed0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/traps.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_TRAPS_H
+#define __ASM_SH_TRAPS_H
+
+#include <linux/compiler.h>
+
+#ifdef CONFIG_SUPERH32
+# include <asm/traps_32.h>
+#else
+# include <asm/traps_64.h>
+#endif
+
+BUILD_TRAP_HANDLER(address_error);
+BUILD_TRAP_HANDLER(debug);
+BUILD_TRAP_HANDLER(bug);
+BUILD_TRAP_HANDLER(breakpoint);
+BUILD_TRAP_HANDLER(singlestep);
+BUILD_TRAP_HANDLER(fpu_error);
+BUILD_TRAP_HANDLER(fpu_state_restore);
+BUILD_TRAP_HANDLER(nmi);
+
+#endif /* __ASM_SH_TRAPS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/traps_32.h b/src/kernel/linux/v4.14/arch/sh/include/asm/traps_32.h
new file mode 100644
index 0000000..8c5bbb7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/traps_32.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_TRAPS_32_H
+#define __ASM_SH_TRAPS_32_H
+
+#include <linux/types.h>
+#include <asm/mmu.h>
+
+#ifdef CONFIG_CPU_HAS_SR_RB
+#define lookup_exception_vector()	\
+({					\
+	unsigned long _vec;		\
+					\
+	__asm__ __volatile__ (		\
+		"stc r2_bank, %0\n\t"	\
+		: "=r" (_vec)		\
+	);				\
+					\
+	_vec;				\
+})
+#else
+#define lookup_exception_vector()	\
+({					\
+	unsigned long _vec;		\
+	__asm__ __volatile__ (		\
+		"mov r4, %0\n\t"	\
+		: "=r" (_vec)		\
+	);				\
+					\
+	_vec;				\
+})
+#endif
+
+static inline void trigger_address_error(void)
+{
+	__asm__ __volatile__ (
+		"ldc %0, sr\n\t"
+		"mov.l @%1, %0"
+		:
+		: "r" (0x10000000), "r" (0x80000001)
+	);
+}
+
+asmlinkage void do_address_error(struct pt_regs *regs,
+				 unsigned long writeaccess,
+				 unsigned long address);
+asmlinkage void do_divide_error(unsigned long r4);
+asmlinkage void do_reserved_inst(void);
+asmlinkage void do_illegal_slot_inst(void);
+asmlinkage void do_exception_error(void);
+
+#define BUILD_TRAP_HANDLER(name)					\
+asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5,	\
+				    unsigned long r6, unsigned long r7,	\
+				    struct pt_regs __regs)
+
+#define TRAP_HANDLER_DECL				\
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);	\
+	unsigned int vec = regs->tra;			\
+	(void)vec;
+
+#endif /* __ASM_SH_TRAPS_32_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/traps_64.h b/src/kernel/linux/v4.14/arch/sh/include/asm/traps_64.h
new file mode 100644
index 0000000..ef5eff9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/traps_64.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_TRAPS_64_H
+#define __ASM_SH_TRAPS_64_H
+
+#include <cpu/registers.h>
+
+extern void phys_stext(void);
+
+#define lookup_exception_vector()		\
+({						\
+	unsigned long _vec;			\
+						\
+	__asm__ __volatile__ (			\
+		"getcon " __EXPEVT ", %0\n\t"	\
+		: "=r" (_vec)			\
+	);					\
+						\
+	_vec;					\
+})
+
+static inline void trigger_address_error(void)
+{
+	phys_stext();
+}
+
+#define BUILD_TRAP_HANDLER(name)	\
+asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs)
+#define TRAP_HANDLER_DECL
+
+#endif /* __ASM_SH_TRAPS_64_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/types.h b/src/kernel/linux/v4.14/arch/sh/include/asm/types.h
new file mode 100644
index 0000000..df96c51
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/types.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_TYPES_H
+#define __ASM_SH_TYPES_H
+
+#include <uapi/asm/types.h>
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_SUPERH32
+typedef u16 insn_size_t;
+typedef u32 reg_size_t;
+#else
+typedef u32 insn_size_t;
+typedef u64 reg_size_t;
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_TYPES_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/uaccess.h b/src/kernel/linux/v4.14/arch/sh/include/asm/uaccess.h
new file mode 100644
index 0000000..6e78163
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/uaccess.h
@@ -0,0 +1,160 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_UACCESS_H
+#define __ASM_SH_UACCESS_H
+
+#include <asm/segment.h>
+#include <asm/extable.h>
+
+#define __addr_ok(addr) \
+	((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg)
+
+/*
+ * __access_ok: Check if address with size is OK or not.
+ *
+ * Uhhuh, this needs 33-bit arithmetic. We have a carry..
+ *
+ * sum := addr + size;  carry? --> flag = true;
+ * if (sum >= addr_limit) flag = true;
+ */
+#define __access_ok(addr, size)	({				\
+	unsigned long __ao_a = (addr), __ao_b = (size);		\
+	unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b;	\
+	__ao_end >= __ao_a && __addr_ok(__ao_end); })
+
+#define access_ok(type, addr, size)	\
+	(__chk_user_ptr(addr),		\
+	 __access_ok((unsigned long __force)(addr), (size)))
+
+#define user_addr_max()	(current_thread_info()->addr_limit.seg)
+
+/*
+ * Uh, these should become the main single-value transfer routines ...
+ * They automatically use the right size if we just have the right
+ * pointer type ...
+ *
+ * As SuperH uses the same address space for kernel and user data, we
+ * can just do these as direct assignments.
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x,ptr)		__put_user_check((x), (ptr), sizeof(*(ptr)))
+#define get_user(x,ptr)		__get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr)	__put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __get_user(x,ptr)	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+#define __get_user_nocheck(x,ptr,size)				\
+({								\
+	long __gu_err;						\
+	unsigned long __gu_val;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__chk_user_ptr(ptr);					\
+	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__force __typeof__(*(ptr)))__gu_val;		\
+	__gu_err;						\
+})
+
+#define __get_user_check(x,ptr,size)					\
+({									\
+	long __gu_err = -EFAULT;					\
+	unsigned long __gu_val = 0;					\
+	const __typeof__(*(ptr)) *__gu_addr = (ptr);			\
+	if (likely(access_ok(VERIFY_READ, __gu_addr, (size))))		\
+		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
+	__gu_err;							\
+})
+
+#define __put_user_nocheck(x,ptr,size)				\
+({								\
+	long __pu_err;						\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__typeof__(*(ptr)) __pu_val = x;			\
+	__chk_user_ptr(ptr);					\
+	__put_user_size(__pu_val, __pu_addr, (size), __pu_err);	\
+	__pu_err;						\
+})
+
+#define __put_user_check(x,ptr,size)				\
+({								\
+	long __pu_err = -EFAULT;				\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__typeof__(*(ptr)) __pu_val = x;			\
+	if (likely(access_ok(VERIFY_WRITE, __pu_addr, size)))	\
+		__put_user_size(__pu_val, __pu_addr, (size),	\
+				__pu_err);			\
+	__pu_err;						\
+})
+
+#ifdef CONFIG_SUPERH32
+# include <asm/uaccess_32.h>
+#else
+# include <asm/uaccess_64.h>
+#endif
+
+extern long strncpy_from_user(char *dest, const char __user *src, long count);
+
+extern __must_check long strnlen_user(const char __user *str, long n);
+
+/* Generic arbitrary sized copy.  */
+/* Return the number of bytes NOT copied */
+__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
+
+static __always_inline unsigned long
+raw_copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	return __copy_user(to, (__force void *)from, n);
+}
+
+static __always_inline unsigned long __must_check
+raw_copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	return __copy_user((__force void *)to, from, n);
+}
+#define INLINE_COPY_FROM_USER
+#define INLINE_COPY_TO_USER
+
+/*
+ * Clear the area and return remaining number of bytes
+ * (on failure.  Usually it's 0.)
+ */
+__kernel_size_t __clear_user(void *addr, __kernel_size_t size);
+
+#define clear_user(addr,n)						\
+({									\
+	void __user * __cl_addr = (addr);				\
+	unsigned long __cl_size = (n);					\
+									\
+	if (__cl_size && access_ok(VERIFY_WRITE,			\
+		((unsigned long)(__cl_addr)), __cl_size))		\
+		__cl_size = __clear_user(__cl_addr, __cl_size);		\
+									\
+	__cl_size;							\
+})
+
+extern void *set_exception_table_vec(unsigned int vec, void *handler);
+
+static inline void *set_exception_table_evt(unsigned int evt, void *handler)
+{
+	return set_exception_table_vec(evt >> 5, handler);
+}
+
+struct mem_access {
+	unsigned long (*from)(void *dst, const void __user *src, unsigned long cnt);
+	unsigned long (*to)(void __user *dst, const void *src, unsigned long cnt);
+};
+
+int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
+			    struct mem_access *ma, int, unsigned long address);
+
+#endif /* __ASM_SH_UACCESS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/uaccess_32.h b/src/kernel/linux/v4.14/arch/sh/include/asm/uaccess_32.h
new file mode 100644
index 0000000..624cf55
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/uaccess_32.h
@@ -0,0 +1,174 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * User space memory access functions
+ *
+ * Copyright (C) 1999, 2002  Niibe Yutaka
+ * Copyright (C) 2003 - 2008  Paul Mundt
+ *
+ *  Based on:
+ *     MIPS implementation version 1.15 by
+ *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
+ *     and i386 version.
+ */
+#ifndef __ASM_SH_UACCESS_32_H
+#define __ASM_SH_UACCESS_32_H
+
+#define __get_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	case 1:							\
+		__get_user_asm(x, ptr, retval, "b");		\
+		break;						\
+	case 2:							\
+		__get_user_asm(x, ptr, retval, "w");		\
+		break;						\
+	case 4:							\
+		__get_user_asm(x, ptr, retval, "l");		\
+		break;						\
+	default:						\
+		__get_user_unknown();				\
+		break;						\
+	}							\
+} while (0)
+
+#ifdef CONFIG_MMU
+#define __get_user_asm(x, addr, err, insn) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov." insn "	%2, %1\n\t" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov	#0, %1\n\t" \
+	"mov.l	4f, %0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3, %0\n\t" \
+	".balign	4\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".previous" \
+	:"=&r" (err), "=&r" (x) \
+	:"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
+#else
+#define __get_user_asm(x, addr, err, insn)		\
+do {							\
+	__asm__ __volatile__ (				\
+		"mov." insn "	%1, %0\n\t"		\
+		: "=&r" (x)				\
+		: "m" (__m(addr))			\
+	);						\
+} while (0)
+#endif /* CONFIG_MMU */
+
+extern void __get_user_unknown(void);
+
+#define __put_user_size(x,ptr,size,retval)		\
+do {							\
+	retval = 0;					\
+	switch (size) {					\
+	case 1:						\
+		__put_user_asm(x, ptr, retval, "b");	\
+		break;					\
+	case 2:						\
+		__put_user_asm(x, ptr, retval, "w");	\
+		break;					\
+	case 4:						\
+		__put_user_asm(x, ptr, retval, "l");	\
+		break;					\
+	case 8:						\
+		__put_user_u64(x, ptr, retval);		\
+		break;					\
+	default:					\
+		__put_user_unknown();			\
+	}						\
+} while (0)
+
+#ifdef CONFIG_MMU
+#define __put_user_asm(x, addr, err, insn)			\
+do {								\
+	__asm__ __volatile__ (					\
+		"1:\n\t"					\
+		"mov." insn "	%1, %2\n\t"			\
+		"2:\n"						\
+		".section	.fixup,\"ax\"\n"		\
+		"3:\n\t"					\
+		"mov.l	4f, %0\n\t"				\
+		"jmp	@%0\n\t"				\
+		" mov	%3, %0\n\t"				\
+		".balign	4\n"				\
+		"4:	.long	2b\n\t"				\
+		".previous\n"					\
+		".section	__ex_table,\"a\"\n\t"		\
+		".long	1b, 3b\n\t"				\
+		".previous"					\
+		: "=&r" (err)					\
+		: "r" (x), "m" (__m(addr)), "i" (-EFAULT),	\
+		  "0" (err)					\
+		: "memory"					\
+	);							\
+} while (0)
+#else
+#define __put_user_asm(x, addr, err, insn)		\
+do {							\
+	__asm__ __volatile__ (				\
+		"mov." insn "	%0, %1\n\t"		\
+		: /* no outputs */			\
+		: "r" (x), "m" (__m(addr))		\
+		: "memory"				\
+	);						\
+} while (0)
+#endif /* CONFIG_MMU */
+
+#if defined(CONFIG_CPU_LITTLE_ENDIAN)
+#define __put_user_u64(val,addr,retval) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov.l	%R1,%2\n\t" \
+	"mov.l	%S1,%T2\n\t" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov.l	4f,%0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3,%0\n\t" \
+	".balign	4\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".previous" \
+	: "=r" (retval) \
+	: "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
+        : "memory"); })
+#else
+#define __put_user_u64(val,addr,retval) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov.l	%S1,%2\n\t" \
+	"mov.l	%R1,%T2\n\t" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov.l	4f,%0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3,%0\n\t" \
+	".balign	4\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".previous" \
+	: "=r" (retval) \
+	: "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
+        : "memory"); })
+#endif
+
+extern void __put_user_unknown(void);
+
+#endif /* __ASM_SH_UACCESS_32_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/uaccess_64.h b/src/kernel/linux/v4.14/arch/sh/include/asm/uaccess_64.h
new file mode 100644
index 0000000..ca5073d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/uaccess_64.h
@@ -0,0 +1,88 @@
+#ifndef __ASM_SH_UACCESS_64_H
+#define __ASM_SH_UACCESS_64_H
+
+/*
+ * include/asm-sh/uaccess_64.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * User space memory access functions
+ *
+ * Copyright (C) 1999  Niibe Yutaka
+ *
+ *  Based on:
+ *     MIPS implementation version 1.15 by
+ *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
+ *     and i386 version.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#define __get_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	x = 0;							\
+	switch (size) {						\
+	case 1:							\
+		retval = __get_user_asm_b((void *)&x,		\
+					  (long)ptr);		\
+		break;						\
+	case 2:							\
+		retval = __get_user_asm_w((void *)&x,		\
+					  (long)ptr);		\
+		break;						\
+	case 4:							\
+		retval = __get_user_asm_l((void *)&x,		\
+					  (long)ptr);		\
+		break;						\
+	case 8:							\
+		retval = __get_user_asm_q((void *)&x,		\
+					  (long)ptr);		\
+		break;						\
+	default:						\
+		__get_user_unknown();				\
+		break;						\
+	}							\
+} while (0)
+
+extern long __get_user_asm_b(void *, long);
+extern long __get_user_asm_w(void *, long);
+extern long __get_user_asm_l(void *, long);
+extern long __get_user_asm_q(void *, long);
+extern void __get_user_unknown(void);
+
+#define __put_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	case 1:							\
+		retval = __put_user_asm_b((void *)&x,		\
+					  (__force long)ptr);	\
+		break;						\
+	case 2:							\
+		retval = __put_user_asm_w((void *)&x,		\
+					  (__force long)ptr);	\
+		break;						\
+	case 4:							\
+		retval = __put_user_asm_l((void *)&x,		\
+					  (__force long)ptr);	\
+		break;						\
+	case 8:							\
+		retval = __put_user_asm_q((void *)&x,		\
+					  (__force long)ptr);	\
+		break;						\
+	default:						\
+		__put_user_unknown();				\
+	}							\
+} while (0)
+
+extern long __put_user_asm_b(void *, long);
+extern long __put_user_asm_w(void *, long);
+extern long __put_user_asm_l(void *, long);
+extern long __put_user_asm_q(void *, long);
+extern void __put_user_unknown(void);
+
+#endif /* __ASM_SH_UACCESS_64_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/unaligned-sh4a.h b/src/kernel/linux/v4.14/arch/sh/include/asm/unaligned-sh4a.h
new file mode 100644
index 0000000..d311f00
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/unaligned-sh4a.h
@@ -0,0 +1,199 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_UNALIGNED_SH4A_H
+#define __ASM_SH_UNALIGNED_SH4A_H
+
+/*
+ * SH-4A has support for unaligned 32-bit loads, and 32-bit loads only.
+ * Support for 64-bit accesses are done through shifting and masking
+ * relative to the endianness. Unaligned stores are not supported by the
+ * instruction encoding, so these continue to use the packed
+ * struct.
+ *
+ * The same note as with the movli.l/movco.l pair applies here, as long
+ * as the load is guaranteed to be inlined, nothing else will hook in to
+ * r0 and we get the return value for free.
+ *
+ * NOTE: Due to the fact we require r0 encoding, care should be taken to
+ * avoid mixing these heavily with other r0 consumers, such as the atomic
+ * ops. Failure to adhere to this can result in the compiler running out
+ * of spill registers and blowing up when building at low optimization
+ * levels. See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=34777.
+ */
+#include <linux/unaligned/packed_struct.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+static inline u16 sh4a_get_unaligned_cpu16(const u8 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return p[0] | p[1] << 8;
+#else
+	return p[0] << 8 | p[1];
+#endif
+}
+
+static __always_inline u32 sh4a_get_unaligned_cpu32(const u8 *p)
+{
+	unsigned long unaligned;
+
+	__asm__ __volatile__ (
+		"movua.l	@%1, %0\n\t"
+		 : "=z" (unaligned)
+		 : "r" (p)
+	);
+
+	return unaligned;
+}
+
+/*
+ * Even though movua.l supports auto-increment on the read side, it can
+ * only store to r0 due to instruction encoding constraints, so just let
+ * the compiler sort it out on its own.
+ */
+static inline u64 sh4a_get_unaligned_cpu64(const u8 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return (u64)sh4a_get_unaligned_cpu32(p + 4) << 32 |
+		    sh4a_get_unaligned_cpu32(p);
+#else
+	return (u64)sh4a_get_unaligned_cpu32(p) << 32 |
+		    sh4a_get_unaligned_cpu32(p + 4);
+#endif
+}
+
+static inline u16 get_unaligned_le16(const void *p)
+{
+	return le16_to_cpu(sh4a_get_unaligned_cpu16(p));
+}
+
+static inline u32 get_unaligned_le32(const void *p)
+{
+	return le32_to_cpu(sh4a_get_unaligned_cpu32(p));
+}
+
+static inline u64 get_unaligned_le64(const void *p)
+{
+	return le64_to_cpu(sh4a_get_unaligned_cpu64(p));
+}
+
+static inline u16 get_unaligned_be16(const void *p)
+{
+	return be16_to_cpu(sh4a_get_unaligned_cpu16(p));
+}
+
+static inline u32 get_unaligned_be32(const void *p)
+{
+	return be32_to_cpu(sh4a_get_unaligned_cpu32(p));
+}
+
+static inline u64 get_unaligned_be64(const void *p)
+{
+	return be64_to_cpu(sh4a_get_unaligned_cpu64(p));
+}
+
+static inline void nonnative_put_le16(u16 val, u8 *p)
+{
+	*p++ = val;
+	*p++ = val >> 8;
+}
+
+static inline void nonnative_put_le32(u32 val, u8 *p)
+{
+	nonnative_put_le16(val, p);
+	nonnative_put_le16(val >> 16, p + 2);
+}
+
+static inline void nonnative_put_le64(u64 val, u8 *p)
+{
+	nonnative_put_le32(val, p);
+	nonnative_put_le32(val >> 32, p + 4);
+}
+
+static inline void nonnative_put_be16(u16 val, u8 *p)
+{
+	*p++ = val >> 8;
+	*p++ = val;
+}
+
+static inline void nonnative_put_be32(u32 val, u8 *p)
+{
+	nonnative_put_be16(val >> 16, p);
+	nonnative_put_be16(val, p + 2);
+}
+
+static inline void nonnative_put_be64(u64 val, u8 *p)
+{
+	nonnative_put_be32(val >> 32, p);
+	nonnative_put_be32(val, p + 4);
+}
+
+static inline void put_unaligned_le16(u16 val, void *p)
+{
+#ifdef __LITTLE_ENDIAN
+	__put_unaligned_cpu16(val, p);
+#else
+	nonnative_put_le16(val, p);
+#endif
+}
+
+static inline void put_unaligned_le32(u32 val, void *p)
+{
+#ifdef __LITTLE_ENDIAN
+	__put_unaligned_cpu32(val, p);
+#else
+	nonnative_put_le32(val, p);
+#endif
+}
+
+static inline void put_unaligned_le64(u64 val, void *p)
+{
+#ifdef __LITTLE_ENDIAN
+	__put_unaligned_cpu64(val, p);
+#else
+	nonnative_put_le64(val, p);
+#endif
+}
+
+static inline void put_unaligned_be16(u16 val, void *p)
+{
+#ifdef __BIG_ENDIAN
+	__put_unaligned_cpu16(val, p);
+#else
+	nonnative_put_be16(val, p);
+#endif
+}
+
+static inline void put_unaligned_be32(u32 val, void *p)
+{
+#ifdef __BIG_ENDIAN
+	__put_unaligned_cpu32(val, p);
+#else
+	nonnative_put_be32(val, p);
+#endif
+}
+
+static inline void put_unaligned_be64(u64 val, void *p)
+{
+#ifdef __BIG_ENDIAN
+	__put_unaligned_cpu64(val, p);
+#else
+	nonnative_put_be64(val, p);
+#endif
+}
+
+/*
+ * While it's a bit non-obvious, even though the generic le/be wrappers
+ * use the __get/put_xxx prefixing, they actually wrap in to the
+ * non-prefixed get/put_xxx variants as provided above.
+ */
+#include <linux/unaligned/generic.h>
+
+#ifdef __LITTLE_ENDIAN
+# define get_unaligned __get_unaligned_le
+# define put_unaligned __put_unaligned_le
+#else
+# define get_unaligned __get_unaligned_be
+# define put_unaligned __put_unaligned_be
+#endif
+
+#endif /* __ASM_SH_UNALIGNED_SH4A_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/unaligned.h b/src/kernel/linux/v4.14/arch/sh/include/asm/unaligned.h
new file mode 100644
index 0000000..0c92e2c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/unaligned.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_SH_UNALIGNED_H
+#define _ASM_SH_UNALIGNED_H
+
+#ifdef CONFIG_CPU_SH4A
+/* SH-4A can handle unaligned loads in a relatively neutered fashion. */
+#include <asm/unaligned-sh4a.h>
+#else
+/* Otherwise, SH can't handle unaligned accesses. */
+#include <asm-generic/unaligned.h>
+#endif
+
+#endif /* _ASM_SH_UNALIGNED_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/uncached.h b/src/kernel/linux/v4.14/arch/sh/include/asm/uncached.h
new file mode 100644
index 0000000..e7f68ec
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/uncached.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_UNCACHED_H
+#define __ASM_SH_UNCACHED_H
+
+#include <linux/bug.h>
+
+#ifdef CONFIG_UNCACHED_MAPPING
+extern unsigned long cached_to_uncached;
+extern unsigned long uncached_size;
+extern unsigned long uncached_start, uncached_end;
+
+extern int virt_addr_uncached(unsigned long kaddr);
+extern void uncached_init(void);
+extern void uncached_resize(unsigned long size);
+
+/*
+ * Jump to uncached area.
+ * When handling TLB or caches, we need to do it from an uncached area.
+ */
+#define jump_to_uncached()			\
+do {						\
+	unsigned long __dummy;			\
+						\
+	__asm__ __volatile__(			\
+		"mova	1f, %0\n\t"		\
+		"add	%1, %0\n\t"		\
+		"jmp	@%0\n\t"		\
+		" nop\n\t"			\
+		".balign 4\n"			\
+		"1:"				\
+		: "=&z" (__dummy)		\
+		: "r" (cached_to_uncached));	\
+} while (0)
+
+/*
+ * Back to cached area.
+ */
+#define back_to_cached()				\
+do {							\
+	unsigned long __dummy;				\
+	ctrl_barrier();					\
+	__asm__ __volatile__(				\
+		"mov.l	1f, %0\n\t"			\
+		"jmp	@%0\n\t"			\
+		" nop\n\t"				\
+		".balign 4\n"				\
+		"1:	.long 2f\n"			\
+		"2:"					\
+		: "=&r" (__dummy));			\
+} while (0)
+#else
+#define virt_addr_uncached(kaddr)	(0)
+#define uncached_init()			do { } while (0)
+#define uncached_resize(size)		BUG()
+#define jump_to_uncached()		do { } while (0)
+#define back_to_cached()		do { } while (0)
+#endif
+
+#endif /* __ASM_SH_UNCACHED_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/unistd.h b/src/kernel/linux/v4.14/arch/sh/include/asm/unistd.h
new file mode 100644
index 0000000..b36200a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/unistd.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+# ifdef CONFIG_SUPERH32
+#  include <asm/unistd_32.h>
+# else
+#  include <asm/unistd_64.h>
+# endif
+
+# define __ARCH_WANT_OLD_READDIR
+# define __ARCH_WANT_OLD_STAT
+# define __ARCH_WANT_STAT64
+# define __ARCH_WANT_SYS_ALARM
+# define __ARCH_WANT_SYS_GETHOSTNAME
+# define __ARCH_WANT_SYS_IPC
+# define __ARCH_WANT_SYS_PAUSE
+# define __ARCH_WANT_SYS_SIGNAL
+# define __ARCH_WANT_SYS_TIME
+# define __ARCH_WANT_SYS_UTIME
+# define __ARCH_WANT_SYS_WAITPID
+# define __ARCH_WANT_SYS_SOCKETCALL
+# define __ARCH_WANT_SYS_FADVISE64
+# define __ARCH_WANT_SYS_GETPGRP
+# define __ARCH_WANT_SYS_LLSEEK
+# define __ARCH_WANT_SYS_NICE
+# define __ARCH_WANT_SYS_OLD_GETRLIMIT
+# define __ARCH_WANT_SYS_OLD_UNAME
+# define __ARCH_WANT_SYS_OLDUMOUNT
+# define __ARCH_WANT_SYS_SIGPENDING
+# define __ARCH_WANT_SYS_SIGPROCMASK
+# define __ARCH_WANT_SYS_FORK
+# define __ARCH_WANT_SYS_VFORK
+# define __ARCH_WANT_SYS_CLONE
+
+#include <uapi/asm/unistd.h>
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/unwinder.h b/src/kernel/linux/v4.14/arch/sh/include/asm/unwinder.h
new file mode 100644
index 0000000..ce82c96
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/unwinder.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_UNWINDER_H
+#define _LINUX_UNWINDER_H
+
+#include <asm/stacktrace.h>
+
+struct unwinder {
+	const char *name;
+	struct list_head list;
+	int rating;
+	void (*dump)(struct task_struct *, struct pt_regs *,
+		     unsigned long *, const struct stacktrace_ops *, void *);
+};
+
+extern int unwinder_init(void);
+extern int unwinder_register(struct unwinder *);
+
+extern void unwind_stack(struct task_struct *, struct pt_regs *,
+			 unsigned long *, const struct stacktrace_ops *,
+			 void *);
+
+extern void stack_reader_dump(struct task_struct *, struct pt_regs *,
+			      unsigned long *, const struct stacktrace_ops *,
+			      void *);
+
+/*
+ * Used by fault handling code to signal to the unwinder code that it
+ * should switch to a different unwinder.
+ */
+extern int unwinder_faulted;
+
+#endif /* _LINUX_UNWINDER_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/user.h b/src/kernel/linux/v4.14/arch/sh/include/asm/user.h
new file mode 100644
index 0000000..e97f2ef
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/user.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_USER_H
+#define __ASM_SH_USER_H
+
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd).  The file contents are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+
+#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
+struct user_fpu_struct {
+	unsigned long fp_regs[32];
+	unsigned int fpscr;
+};
+#else
+struct user_fpu_struct {
+	unsigned long fp_regs[16];
+	unsigned long xfp_regs[16];
+	unsigned long fpscr;
+	unsigned long fpul;
+};
+#endif
+
+struct user {
+	struct pt_regs	regs;			/* entire machine state */
+	struct user_fpu_struct fpu;	/* Math Co-processor registers  */
+	int u_fpvalid;		/* True if math co-processor being used */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	unsigned long	u_ar0;			/* help gdb find registers */
+	struct user_fpu_struct* u_fpstate;	/* Math Co-processor pointer */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* __ASM_SH_USER_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/vga.h b/src/kernel/linux/v4.14/arch/sh/include/asm/vga.h
new file mode 100644
index 0000000..06a5de8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/vga.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_VGA_H
+#define __ASM_SH_VGA_H
+
+/* Stupid drivers. */
+
+#endif /* __ASM_SH_VGA_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/vmlinux.lds.h b/src/kernel/linux/v4.14/arch/sh/include/asm/vmlinux.lds.h
new file mode 100644
index 0000000..f312813
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/vmlinux.lds.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_VMLINUX_LDS_H
+#define __ASM_SH_VMLINUX_LDS_H
+
+#include <asm-generic/vmlinux.lds.h>
+
+#ifdef CONFIG_DWARF_UNWINDER
+#define DWARF_EH_FRAME							\
+	.eh_frame : AT(ADDR(.eh_frame) - LOAD_OFFSET) {			\
+		  VMLINUX_SYMBOL(__start_eh_frame) = .;			\
+		  *(.eh_frame)						\
+		  VMLINUX_SYMBOL(__stop_eh_frame) = .;			\
+	}
+#else
+#define DWARF_EH_FRAME
+#endif
+
+#ifdef CONFIG_SUPERH64
+#define EXTRA_TEXT		\
+	*(.text64)		\
+	*(.text..SHmedia32)
+#else
+#define EXTRA_TEXT
+#endif
+
+#endif /* __ASM_SH_VMLINUX_LDS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/watchdog.h b/src/kernel/linux/v4.14/arch/sh/include/asm/watchdog.h
new file mode 100644
index 0000000..85a7aca
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/watchdog.h
@@ -0,0 +1,165 @@
+/*
+ * include/asm-sh/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ * Copyright (C) 2009 Siemens AG
+ * Copyright (C) 2009 Valentin Sitdikov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __ASM_SH_WATCHDOG_H
+#define __ASM_SH_WATCHDOG_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/io.h>
+
+#define WTCNT_HIGH	0x5a
+#define WTCSR_HIGH	0xa5
+
+#define WTCSR_CKS2	0x04
+#define WTCSR_CKS1	0x02
+#define WTCSR_CKS0	0x01
+
+#include <cpu/watchdog.h>
+
+/*
+ * See cpu-sh2/watchdog.h for explanation of this stupidity..
+ */
+#ifndef WTCNT_R
+#  define WTCNT_R	WTCNT
+#endif
+
+#ifndef WTCSR_R
+#  define WTCSR_R	WTCSR
+#endif
+
+/*
+ * CKS0-2 supports a number of clock division ratios. At the time the watchdog
+ * is enabled, it defaults to a 41 usec overflow period .. we overload this to
+ * something a little more reasonable, and really can't deal with anything
+ * lower than WTCSR_CKS_1024, else we drop back into the usec range.
+ *
+ * Clock Division Ratio         Overflow Period
+ * --------------------------------------------
+ *     1/32 (initial value)       41 usecs
+ *     1/64                       82 usecs
+ *     1/128                     164 usecs
+ *     1/256                     328 usecs
+ *     1/512                     656 usecs
+ *     1/1024                   1.31 msecs
+ *     1/2048                   2.62 msecs
+ *     1/4096                   5.25 msecs
+ */
+#define WTCSR_CKS_32	0x00
+#define WTCSR_CKS_64	0x01
+#define WTCSR_CKS_128	0x02
+#define WTCSR_CKS_256	0x03
+#define WTCSR_CKS_512	0x04
+#define WTCSR_CKS_1024	0x05
+#define WTCSR_CKS_2048	0x06
+#define WTCSR_CKS_4096	0x07
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7785) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+/**
+ * 	sh_wdt_read_cnt - Read from Counter
+ * 	Reads back the WTCNT value.
+ */
+static inline __u32 sh_wdt_read_cnt(void)
+{
+	return __raw_readl(WTCNT_R);
+}
+
+/**
+ *	sh_wdt_write_cnt - Write to Counter
+ *	@val: Value to write
+ *
+ *	Writes the given value @val to the lower byte of the timer counter.
+ *	The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_cnt(__u32 val)
+{
+	__raw_writel((WTCNT_HIGH << 24) | (__u32)val, WTCNT);
+}
+
+/**
+ *	sh_wdt_write_bst - Write to Counter
+ *	@val: Value to write
+ *
+ *	Writes the given value @val to the lower byte of the timer counter.
+ *	The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_bst(__u32 val)
+{
+	__raw_writel((WTBST_HIGH << 24) | (__u32)val, WTBST);
+}
+/**
+ * 	sh_wdt_read_csr - Read from Control/Status Register
+ *
+ *	Reads back the WTCSR value.
+ */
+static inline __u32 sh_wdt_read_csr(void)
+{
+	return __raw_readl(WTCSR_R);
+}
+
+/**
+ * 	sh_wdt_write_csr - Write to Control/Status Register
+ * 	@val: Value to write
+ *
+ * 	Writes the given value @val to the lower byte of the control/status
+ * 	register. The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_csr(__u32 val)
+{
+	__raw_writel((WTCSR_HIGH << 24) | (__u32)val, WTCSR);
+}
+#else
+/**
+ * 	sh_wdt_read_cnt - Read from Counter
+ * 	Reads back the WTCNT value.
+ */
+static inline __u8 sh_wdt_read_cnt(void)
+{
+	return __raw_readb(WTCNT_R);
+}
+
+/**
+ *	sh_wdt_write_cnt - Write to Counter
+ *	@val: Value to write
+ *
+ *	Writes the given value @val to the lower byte of the timer counter.
+ *	The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_cnt(__u8 val)
+{
+	__raw_writew((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
+}
+
+/**
+ * 	sh_wdt_read_csr - Read from Control/Status Register
+ *
+ *	Reads back the WTCSR value.
+ */
+static inline __u8 sh_wdt_read_csr(void)
+{
+	return __raw_readb(WTCSR_R);
+}
+
+/**
+ * 	sh_wdt_write_csr - Write to Control/Status Register
+ * 	@val: Value to write
+ *
+ * 	Writes the given value @val to the lower byte of the control/status
+ * 	register. The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_csr(__u8 val)
+{
+	__raw_writew((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
+}
+#endif /* CONFIG_CPU_SUBTYPE_SH7785 || CONFIG_CPU_SUBTYPE_SH7780 */
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_WATCHDOG_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/asm/word-at-a-time.h b/src/kernel/linux/v4.14/arch/sh/include/asm/word-at-a-time.h
new file mode 100644
index 0000000..4aa3984
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/asm/word-at-a-time.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_WORD_AT_A_TIME_H
+#define __ASM_SH_WORD_AT_A_TIME_H
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+# include <asm-generic/word-at-a-time.h>
+#else
+/*
+ * Little-endian version cribbed from x86.
+ */
+struct word_at_a_time {
+	const unsigned long one_bits, high_bits;
+};
+
+#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) }
+
+/* Carl Chatfield / Jan Achrenius G+ version for 32-bit */
+static inline long count_masked_bytes(long mask)
+{
+	/* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */
+	long a = (0x0ff0001+mask) >> 23;
+	/* Fix the 1 for 00 case */
+	return a & mask;
+}
+
+/* Return nonzero if it has a zero */
+static inline unsigned long has_zero(unsigned long a, unsigned long *bits, const struct word_at_a_time *c)
+{
+	unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits;
+	*bits = mask;
+	return mask;
+}
+
+static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits, const struct word_at_a_time *c)
+{
+	return bits;
+}
+
+static inline unsigned long create_zero_mask(unsigned long bits)
+{
+	bits = (bits - 1) & ~bits;
+	return bits >> 7;
+}
+
+/* The mask we created is directly usable as a bytemask */
+#define zero_bytemask(mask) (mask)
+
+static inline unsigned long find_zero(unsigned long mask)
+{
+	return count_masked_bytes(mask);
+}
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/addrspace.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/addrspace.h
new file mode 100644
index 0000000..2b9ab93
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/addrspace.h
@@ -0,0 +1,19 @@
+/*
+ * Definitions for the address spaces of the SH-2 CPUs.
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_ADDRSPACE_H
+#define __ASM_CPU_SH2_ADDRSPACE_H
+
+#define P0SEG		0x00000000
+#define P1SEG		0x80000000
+#define P2SEG		0xa0000000
+#define P3SEG		0xc0000000
+#define P4SEG		0xe0000000
+
+#endif /* __ASM_CPU_SH2_ADDRSPACE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/mmu_context.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/mmu_context.h
new file mode 100644
index 0000000..beeb299
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/mmu_context.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-sh/cpu-sh2/mmu_context.h
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H
+#define __ASM_CPU_SH2_MMU_CONTEXT_H
+
+/* No MMU */
+
+#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/pfc.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/pfc.h
new file mode 100644
index 0000000..e538813
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/pfc.h
@@ -0,0 +1,26 @@
+/*
+ * SH Pin Function Control Initialization
+ *
+ * Copyright (C) 2012  Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_SH_CPU_PFC_H__
+#define __ARCH_SH_CPU_PFC_H__
+
+#include <linux/types.h>
+
+struct resource;
+
+int sh_pfc_register(const char *name,
+		    struct resource *resource, u32 num_resources);
+
+#endif /* __ARCH_SH_CPU_PFC_H__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/rtc.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/rtc.h
new file mode 100644
index 0000000..5fe726a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/rtc.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CPU_SH2_RTC_H
+#define __ASM_SH_CPU_SH2_RTC_H
+
+#define rtc_reg_size		sizeof(u16)
+#define RTC_BIT_INVERTED	0
+#define RTC_DEF_CAPABILITIES	0UL
+
+#endif /* __ASM_SH_CPU_SH2_RTC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/sigcontext.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/sigcontext.h
new file mode 100644
index 0000000..e005dd1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/sigcontext.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_CPU_SH2_SIGCONTEXT_H
+#define __ASM_CPU_SH2_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long	oldmask;
+
+	/* CPU registers */
+	unsigned long sc_regs[16];
+	unsigned long sc_pc;
+	unsigned long sc_pr;
+	unsigned long sc_sr;
+	unsigned long sc_gbr;
+	unsigned long sc_mach;
+	unsigned long sc_macl;
+};
+
+#endif /* __ASM_CPU_SH2_SIGCONTEXT_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/timer.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/timer.h
new file mode 100644
index 0000000..a39c241
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-common/cpu/timer.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_CPU_SH2_TIMER_H
+#define __ASM_CPU_SH2_TIMER_H
+
+/* Nothing needed yet */
+
+#endif /* __ASM_CPU_SH2_TIMER_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2/cpu/cache.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2/cpu/cache.h
new file mode 100644
index 0000000..aa1b2b9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2/cpu/cache.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/cpu-sh2/cache.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_CACHE_H
+#define __ASM_CPU_SH2_CACHE_H
+
+#define L1_CACHE_SHIFT	4
+
+#define SH_CACHE_VALID		1
+#define SH_CACHE_UPDATED	2
+#define SH_CACHE_COMBINED	4
+#define SH_CACHE_ASSOC		8
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7619)
+#define SH_CCR		0xffffffec
+
+#define CCR_CACHE_CE	0x01	/* Cache enable */
+#define CCR_CACHE_WT	0x02    /* CCR[bit1=1,bit2=1] */
+				/* 0x00000000-0x7fffffff: Write-through  */
+				/* 0x80000000-0x9fffffff: Write-back     */
+                                /* 0xc0000000-0xdfffffff: Write-through  */
+#define CCR_CACHE_CB	0x04    /* CCR[bit1=0,bit2=0] */
+				/* 0x00000000-0x7fffffff: Write-back     */
+				/* 0x80000000-0x9fffffff: Write-through  */
+                                /* 0xc0000000-0xdfffffff: Write-back     */
+#define CCR_CACHE_CF	0x08	/* Cache invalidate */
+
+#define CACHE_OC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_OC_DATA_ARRAY	0xf1000000
+
+#define CCR_CACHE_ENABLE	CCR_CACHE_CE
+#define CCR_CACHE_INVALIDATE	CCR_CACHE_CF
+#define CACHE_PHYSADDR_MASK	0x1ffffc00
+
+#endif
+
+#endif /* __ASM_CPU_SH2_CACHE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2/cpu/freq.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2/cpu/freq.h
new file mode 100644
index 0000000..31de475
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2/cpu/freq.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-sh/cpu-sh2/freq.h
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_FREQ_H
+#define __ASM_CPU_SH2_FREQ_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7619)
+#define FREQCR	0xf815ff80
+#endif
+
+#endif /* __ASM_CPU_SH2_FREQ_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2/cpu/watchdog.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2/cpu/watchdog.h
new file mode 100644
index 0000000..1eab8aa
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2/cpu/watchdog.h
@@ -0,0 +1,69 @@
+/*
+ * include/asm-sh/cpu-sh2/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_WATCHDOG_H
+#define __ASM_CPU_SH2_WATCHDOG_H
+
+/*
+ * More SH-2 brilliance .. its not good enough that we can't read
+ * and write the same sizes to WTCNT, now we have to read and write
+ * with different sizes at different addresses for WTCNT _and_ RSTCSR.
+ *
+ * At least on the bright side no one has managed to screw over WTCSR
+ * in this fashion .. yet.
+ */
+/* Register definitions */
+#define WTCNT		0xfffffe80
+#define WTCSR		0xfffffe80
+#define RSTCSR		0xfffffe82
+
+#define WTCNT_R		(WTCNT + 1)
+#define RSTCSR_R	(RSTCSR + 1)
+
+/* Bit definitions */
+#define WTCSR_IOVF	0x80
+#define WTCSR_WT	0x40
+#define WTCSR_TME	0x20
+#define WTCSR_RSTS	0x00
+
+#define RSTCSR_RSTS	0x20
+
+/**
+ * 	sh_wdt_read_rstcsr - Read from Reset Control/Status Register
+ *
+ *	Reads back the RSTCSR value.
+ */
+static inline __u8 sh_wdt_read_rstcsr(void)
+{
+	/*
+	 * Same read/write brain-damage as for WTCNT here..
+	 */
+	return __raw_readb(RSTCSR_R);
+}
+
+/**
+ * 	sh_wdt_write_csr - Write to Reset Control/Status Register
+ *
+ * 	@val: Value to write
+ *
+ * 	Writes the given value @val to the lower byte of the control/status
+ * 	register. The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_rstcsr(__u8 val)
+{
+	/*
+	 * Note: Due to the brain-damaged nature of this register,
+	 * we can't presently touch the WOVF bit, since the upper byte
+	 * has to be swapped for this. So just leave it alone..
+	 */
+	__raw_writeb((WTCNT_HIGH << 8) | (__u16)val, RSTCSR);
+}
+
+#endif /* __ASM_CPU_SH2_WATCHDOG_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/addrspace.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/addrspace.h
new file mode 100644
index 0000000..3afa46c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/addrspace.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H
+#define __ASM_SH_CPU_SH2A_ADDRSPACE_H
+
+#define P0SEG		0x00000000
+#define P1SEG		0x00000000
+#define P2SEG		0x20000000
+#define P3SEG		0x40000000
+#define P4SEG		0x60000000
+
+#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/cache.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/cache.h
new file mode 100644
index 0000000..b27ce92
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/cache.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/cpu-sh2a/cache.h
+ *
+ * Copyright (C) 2004 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2A_CACHE_H
+#define __ASM_CPU_SH2A_CACHE_H
+
+#define L1_CACHE_SHIFT	4
+
+#define SH_CACHE_VALID		1
+#define SH_CACHE_UPDATED	2
+#define SH_CACHE_COMBINED	4
+#define SH_CACHE_ASSOC		8
+
+#define SH_CCR		0xfffc1000 /* CCR1 */
+#define SH_CCR2		0xfffc1004
+
+/*
+ * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not
+ * listed here are reserved.
+ */
+#define CCR_CACHE_CB	0x0000	/* Hack */
+#define CCR_CACHE_OCE	0x0001
+#define CCR_CACHE_WT	0x0002
+#define CCR_CACHE_OCI	0x0008	/* OCF */
+#define CCR_CACHE_ICE	0x0100
+#define CCR_CACHE_ICI	0x0800	/* ICF */
+
+#define CACHE_IC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_OC_ADDRESS_ARRAY	0xf0800000
+
+#define CCR_CACHE_ENABLE	(CCR_CACHE_OCE | CCR_CACHE_ICE)
+#define CCR_CACHE_INVALIDATE	(CCR_CACHE_OCI | CCR_CACHE_ICI)
+#define CCR_ICACHE_INVALIDATE	CCR_CACHE_ICI
+#define CCR_OCACHE_INVALIDATE	CCR_CACHE_OCI
+#define CACHE_PHYSADDR_MASK	0x1ffffc00
+
+#endif /* __ASM_CPU_SH2A_CACHE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/freq.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/freq.h
new file mode 100644
index 0000000..830fd43
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/freq.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-sh/cpu-sh2a/freq.h
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2A_FREQ_H
+#define __ASM_CPU_SH2A_FREQ_H
+
+#define FREQCR	0xfffe0010
+
+#endif /* __ASM_CPU_SH2A_FREQ_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/rtc.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/rtc.h
new file mode 100644
index 0000000..6b6c7ee
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/rtc.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CPU_SH2A_RTC_H
+#define __ASM_SH_CPU_SH2A_RTC_H
+
+#define rtc_reg_size		sizeof(u16)
+#define RTC_BIT_INVERTED	0
+#define RTC_DEF_CAPABILITIES	RTC_CAP_4_DIGIT_YEAR
+
+#endif /* __ASM_SH_CPU_SH2A_RTC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/sh7203.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/sh7203.h
new file mode 100644
index 0000000..f250adf
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/sh7203.h
@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH7203_H__
+#define __ASM_SH7203_H__
+
+enum {
+	/* PA */
+	GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
+	GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
+
+	/* PB */
+	GPIO_PB12,
+	GPIO_PB11, GPIO_PB10, GPIO_PB9, GPIO_PB8,
+	GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
+	GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
+
+	/* PC */
+	GPIO_PC14, GPIO_PC13, GPIO_PC12,
+	GPIO_PC11, GPIO_PC10, GPIO_PC9, GPIO_PC8,
+	GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
+	GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
+
+	/* PD */
+	GPIO_PD15, GPIO_PD14, GPIO_PD13, GPIO_PD12,
+	GPIO_PD11, GPIO_PD10, GPIO_PD9, GPIO_PD8,
+	GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
+	GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
+
+	/* PE */
+	GPIO_PE15, GPIO_PE14, GPIO_PE13, GPIO_PE12,
+	GPIO_PE11, GPIO_PE10, GPIO_PE9, GPIO_PE8,
+	GPIO_PE7, GPIO_PE6, GPIO_PE5, GPIO_PE4,
+	GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
+
+	/* PF */
+	GPIO_PF30, GPIO_PF29, GPIO_PF28,
+	GPIO_PF27, GPIO_PF26, GPIO_PF25, GPIO_PF24,
+	GPIO_PF23, GPIO_PF22, GPIO_PF21, GPIO_PF20,
+	GPIO_PF19, GPIO_PF18, GPIO_PF17, GPIO_PF16,
+	GPIO_PF15, GPIO_PF14, GPIO_PF13, GPIO_PF12,
+	GPIO_PF11, GPIO_PF10, GPIO_PF9, GPIO_PF8,
+	GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
+	GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
+
+	/* INTC: IRQ and PINT on PB/PD/PE */
+	GPIO_FN_PINT7_PB, GPIO_FN_PINT6_PB, GPIO_FN_PINT5_PB, GPIO_FN_PINT4_PB,
+	GPIO_FN_PINT3_PB, GPIO_FN_PINT2_PB, GPIO_FN_PINT1_PB, GPIO_FN_PINT0_PB,
+	GPIO_FN_PINT7_PD, GPIO_FN_PINT6_PD, GPIO_FN_PINT5_PD, GPIO_FN_PINT4_PD,
+	GPIO_FN_PINT3_PD, GPIO_FN_PINT2_PD, GPIO_FN_PINT1_PD, GPIO_FN_PINT0_PD,
+	GPIO_FN_IRQ7_PB, GPIO_FN_IRQ6_PB, GPIO_FN_IRQ5_PB, GPIO_FN_IRQ4_PB,
+	GPIO_FN_IRQ3_PB, GPIO_FN_IRQ2_PB, GPIO_FN_IRQ1_PB, GPIO_FN_IRQ0_PB,
+	GPIO_FN_IRQ7_PD, GPIO_FN_IRQ6_PD, GPIO_FN_IRQ5_PD, GPIO_FN_IRQ4_PD,
+	GPIO_FN_IRQ3_PD, GPIO_FN_IRQ2_PD, GPIO_FN_IRQ1_PD, GPIO_FN_IRQ0_PD,
+	GPIO_FN_IRQ7_PE, GPIO_FN_IRQ6_PE, GPIO_FN_IRQ5_PE, GPIO_FN_IRQ4_PE,
+	GPIO_FN_IRQ3_PE, GPIO_FN_IRQ2_PE, GPIO_FN_IRQ1_PE, GPIO_FN_IRQ0_PE,
+
+	GPIO_FN_WDTOVF, GPIO_FN_IRQOUT, GPIO_FN_REFOUT, GPIO_FN_IRQOUT_REFOUT,
+	GPIO_FN_UBCTRG,
+
+	/* CAN */
+	GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
+	GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1,
+
+	/* IIC3 */
+	GPIO_FN_SDA3, GPIO_FN_SCL3,
+	GPIO_FN_SDA2, GPIO_FN_SCL2,
+	GPIO_FN_SDA1, GPIO_FN_SCL1,
+	GPIO_FN_SDA0, GPIO_FN_SCL0,
+
+	/* DMAC */
+	GPIO_FN_TEND0_PD, GPIO_FN_TEND0_PE, GPIO_FN_DACK0_PD,
+	GPIO_FN_DACK0_PE, GPIO_FN_DREQ0_PD, GPIO_FN_DREQ0_PE,
+	GPIO_FN_TEND1_PD, GPIO_FN_TEND1_PE, GPIO_FN_DACK1_PD,
+	GPIO_FN_DACK1_PE, GPIO_FN_DREQ1_PD, GPIO_FN_DREQ1_PE,
+	GPIO_FN_DACK2, GPIO_FN_DREQ2,
+	GPIO_FN_DACK3, GPIO_FN_DREQ3,
+
+	/* ADC */
+	GPIO_FN_ADTRG_PD, GPIO_FN_ADTRG_PE,
+
+	/* BSC */
+	GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
+	GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
+	GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
+	GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
+	GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
+	GPIO_FN_A21, GPIO_FN_CS4, GPIO_FN_MRES, GPIO_FN_BS,
+	GPIO_FN_IOIS16, GPIO_FN_CS1, GPIO_FN_CS6_CE1B,
+	GPIO_FN_CE2B, GPIO_FN_CS5_CE1A, GPIO_FN_CE2A,
+	GPIO_FN_FRAME, GPIO_FN_WAIT, GPIO_FN_RDWR,
+	GPIO_FN_CKE, GPIO_FN_CASU, GPIO_FN_BREQ, GPIO_FN_RASU,
+	GPIO_FN_BACK, GPIO_FN_CASL, GPIO_FN_RASL,
+	GPIO_FN_WE3_DQMUU_AH_ICIO_WR, GPIO_FN_WE2_DQMUL_ICIORD,
+	GPIO_FN_WE1_DQMLU_WE, GPIO_FN_WE0_DQMLL,
+	GPIO_FN_CS3, GPIO_FN_CS2, GPIO_FN_A1, GPIO_FN_A0, GPIO_FN_CS7,
+
+	/* TMU */
+	GPIO_FN_TIOC4D, GPIO_FN_TIOC4C, GPIO_FN_TIOC4B, GPIO_FN_TIOC4A,
+	GPIO_FN_TIOC3D, GPIO_FN_TIOC3C, GPIO_FN_TIOC3B, GPIO_FN_TIOC3A,
+	GPIO_FN_TIOC2B, GPIO_FN_TIOC1B, GPIO_FN_TIOC2A, GPIO_FN_TIOC1A,
+	GPIO_FN_TIOC0D, GPIO_FN_TIOC0C, GPIO_FN_TIOC0B, GPIO_FN_TIOC0A,
+	GPIO_FN_TCLKD_PD, GPIO_FN_TCLKC_PD, GPIO_FN_TCLKB_PD, GPIO_FN_TCLKA_PD,
+	GPIO_FN_TCLKD_PF, GPIO_FN_TCLKC_PF, GPIO_FN_TCLKB_PF, GPIO_FN_TCLKA_PF,
+
+	/* SSU */
+	GPIO_FN_SCS0_PD, GPIO_FN_SSO0_PD, GPIO_FN_SSI0_PD, GPIO_FN_SSCK0_PD,
+	GPIO_FN_SCS0_PF, GPIO_FN_SSO0_PF, GPIO_FN_SSI0_PF, GPIO_FN_SSCK0_PF,
+	GPIO_FN_SCS1_PD, GPIO_FN_SSO1_PD, GPIO_FN_SSI1_PD, GPIO_FN_SSCK1_PD,
+	GPIO_FN_SCS1_PF, GPIO_FN_SSO1_PF, GPIO_FN_SSI1_PF, GPIO_FN_SSCK1_PF,
+
+	/* SCIF */
+	GPIO_FN_TXD0, GPIO_FN_RXD0, GPIO_FN_SCK0,
+	GPIO_FN_TXD1, GPIO_FN_RXD1, GPIO_FN_SCK1,
+	GPIO_FN_TXD2, GPIO_FN_RXD2, GPIO_FN_SCK2,
+	GPIO_FN_RTS3, GPIO_FN_CTS3, GPIO_FN_TXD3, GPIO_FN_RXD3, GPIO_FN_SCK3,
+
+	/* SSI */
+	GPIO_FN_AUDIO_CLK,
+	GPIO_FN_SSIDATA3, GPIO_FN_SSIWS3, GPIO_FN_SSISCK3,
+	GPIO_FN_SSIDATA2, GPIO_FN_SSIWS2, GPIO_FN_SSISCK2,
+	GPIO_FN_SSIDATA1, GPIO_FN_SSIWS1, GPIO_FN_SSISCK1,
+	GPIO_FN_SSIDATA0, GPIO_FN_SSIWS0, GPIO_FN_SSISCK0,
+
+	/* FLCTL */
+	GPIO_FN_FCE, GPIO_FN_FRB,
+	GPIO_FN_NAF7, GPIO_FN_NAF6, GPIO_FN_NAF5, GPIO_FN_NAF4,
+	GPIO_FN_NAF3, GPIO_FN_NAF2, GPIO_FN_NAF1, GPIO_FN_NAF0,
+	GPIO_FN_FSC, GPIO_FN_FOE, GPIO_FN_FCDE, GPIO_FN_FWE,
+
+	/* LCDC */
+	GPIO_FN_LCD_VEPWC, GPIO_FN_LCD_VCPWC,
+	GPIO_FN_LCD_CLK, GPIO_FN_LCD_FLM,
+	GPIO_FN_LCD_M_DISP, GPIO_FN_LCD_CL2,
+	GPIO_FN_LCD_CL1, GPIO_FN_LCD_DON,
+	GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14,
+	GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12,
+	GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10,
+	GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8,
+	GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6,
+	GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4,
+	GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2,
+	GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0,
+};
+
+#endif /* __ASM_SH7203_H__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/sh7264.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/sh7264.h
new file mode 100644
index 0000000..d12c191
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/sh7264.h
@@ -0,0 +1,175 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH7264_H__
+#define __ASM_SH7264_H__
+
+enum {
+	/* Port A */
+	GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
+
+	/* Port B */
+	GPIO_PB22, GPIO_PB21, GPIO_PB20,
+	GPIO_PB19, GPIO_PB18, GPIO_PB17, GPIO_PB16,
+	GPIO_PB15, GPIO_PB14, GPIO_PB13, GPIO_PB12,
+	GPIO_PB11, GPIO_PB10, GPIO_PB9, GPIO_PB8,
+	GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
+	GPIO_PB3, GPIO_PB2, GPIO_PB1,
+
+	/* Port C */
+	GPIO_PC10, GPIO_PC9, GPIO_PC8,
+	GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
+	GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
+
+	/* Port D */
+	GPIO_PD15, GPIO_PD14, GPIO_PD13, GPIO_PD12,
+	GPIO_PD11, GPIO_PD10, GPIO_PD9, GPIO_PD8,
+	GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
+	GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
+
+	/* Port E */
+	GPIO_PE5, GPIO_PE4,
+	GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
+
+	/* Port F */
+	GPIO_PF12,
+	GPIO_PF11, GPIO_PF10, GPIO_PF9, GPIO_PF8,
+	GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
+	GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
+
+	/* Port G */
+	GPIO_PG24,
+	GPIO_PG23, GPIO_PG22, GPIO_PG21, GPIO_PG20,
+	GPIO_PG19, GPIO_PG18, GPIO_PG17, GPIO_PG16,
+	GPIO_PG15, GPIO_PG14, GPIO_PG13, GPIO_PG12,
+	GPIO_PG11, GPIO_PG10, GPIO_PG9, GPIO_PG8,
+	GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
+	GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
+
+	/* Port H - Port H does not have a Data Register */
+
+	/* Port I - not on device */
+
+	/* Port J */
+	GPIO_PJ11, GPIO_PJ10, GPIO_PJ9, GPIO_PJ8,
+	GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
+	GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
+
+	/* Port K */
+	GPIO_PK11, GPIO_PK10, GPIO_PK9, GPIO_PK8,
+	GPIO_PK7, GPIO_PK6, GPIO_PK5, GPIO_PK4,
+	GPIO_PK3, GPIO_PK2, GPIO_PK1, GPIO_PK0,
+
+	/* INTC: IRQ and PINT on PB/PD/PE */
+	GPIO_FN_PINT7_PG, GPIO_FN_PINT6_PG, GPIO_FN_PINT5_PG, GPIO_FN_PINT4_PG,
+	GPIO_FN_PINT3_PG, GPIO_FN_PINT2_PG, GPIO_FN_PINT1_PG,
+
+	GPIO_FN_IRQ7_PC, GPIO_FN_IRQ6_PC, GPIO_FN_IRQ5_PC, GPIO_FN_IRQ4_PC,
+	GPIO_FN_IRQ3_PG, GPIO_FN_IRQ2_PG, GPIO_FN_IRQ1_PJ, GPIO_FN_IRQ0_PJ,
+	GPIO_FN_IRQ3_PE, GPIO_FN_IRQ2_PE, GPIO_FN_IRQ1_PE, GPIO_FN_IRQ0_PE,
+
+	/* WDT */
+	GPIO_FN_WDTOVF,
+
+	/* CAN */
+	GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
+	GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1,
+
+	/* DMAC */
+	GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0,
+	GPIO_FN_TEND1, GPIO_FN_DACK1, GPIO_FN_DREQ1,
+
+	/* ADC */
+	GPIO_FN_ADTRG,
+
+	/* BSC */
+
+	GPIO_FN_A25, GPIO_FN_A24,
+	GPIO_FN_A23, GPIO_FN_A22, GPIO_FN_A21, GPIO_FN_A20,
+	GPIO_FN_A19, GPIO_FN_A18, GPIO_FN_A17, GPIO_FN_A16,
+	GPIO_FN_A15, GPIO_FN_A14, GPIO_FN_A13, GPIO_FN_A12,
+	GPIO_FN_A11, GPIO_FN_A10, GPIO_FN_A9, GPIO_FN_A8,
+	GPIO_FN_A7, GPIO_FN_A6, GPIO_FN_A5, GPIO_FN_A4,
+	GPIO_FN_A3, GPIO_FN_A2, GPIO_FN_A1, GPIO_FN_A0,
+	GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
+	GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
+	GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
+	GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
+
+	GPIO_FN_BS,
+	GPIO_FN_CS4, GPIO_FN_CS3, GPIO_FN_CS2, GPIO_FN_CS1, GPIO_FN_CS0,
+	GPIO_FN_CS6CE1B, GPIO_FN_CS5CE1A,
+	GPIO_FN_CE2A, GPIO_FN_CE2B,
+	GPIO_FN_RD, GPIO_FN_RDWR,
+	GPIO_FN_ICIOWRAH, GPIO_FN_ICIORD,
+	GPIO_FN_WE1DQMUWE, GPIO_FN_WE0DQML,
+	GPIO_FN_RAS, GPIO_FN_CAS, GPIO_FN_CKE,
+	GPIO_FN_WAIT, GPIO_FN_BREQ, GPIO_FN_BACK,
+	GPIO_FN_IOIS16,
+
+	/* TMU */
+	GPIO_FN_TIOC4D, GPIO_FN_TIOC4C, GPIO_FN_TIOC4B, GPIO_FN_TIOC4A,
+	GPIO_FN_TIOC3D, GPIO_FN_TIOC3C, GPIO_FN_TIOC3B, GPIO_FN_TIOC3A,
+	GPIO_FN_TIOC2B, GPIO_FN_TIOC1B, GPIO_FN_TIOC2A, GPIO_FN_TIOC1A,
+	GPIO_FN_TIOC0D, GPIO_FN_TIOC0C, GPIO_FN_TIOC0B, GPIO_FN_TIOC0A,
+	GPIO_FN_TCLKD, GPIO_FN_TCLKC, GPIO_FN_TCLKB, GPIO_FN_TCLKA,
+
+	/* SSU */
+	GPIO_FN_SCS0_PD, GPIO_FN_SSO0_PD, GPIO_FN_SSI0_PD, GPIO_FN_SSCK0_PD,
+	GPIO_FN_SCS0_PF, GPIO_FN_SSO0_PF, GPIO_FN_SSI0_PF, GPIO_FN_SSCK0_PF,
+	GPIO_FN_SCS1_PD, GPIO_FN_SSO1_PD, GPIO_FN_SSI1_PD, GPIO_FN_SSCK1_PD,
+	GPIO_FN_SCS1_PF, GPIO_FN_SSO1_PF, GPIO_FN_SSI1_PF, GPIO_FN_SSCK1_PF,
+
+	/* SCIF */
+	GPIO_FN_SCK0, GPIO_FN_SCK1, GPIO_FN_SCK2, GPIO_FN_SCK3,
+	GPIO_FN_RXD0, GPIO_FN_RXD1, GPIO_FN_RXD2, GPIO_FN_RXD3,
+	GPIO_FN_TXD0, GPIO_FN_TXD1, GPIO_FN_TXD2, GPIO_FN_TXD3,
+	GPIO_FN_RXD4, GPIO_FN_RXD5, GPIO_FN_RXD6, GPIO_FN_RXD7,
+	GPIO_FN_TXD4, GPIO_FN_TXD5, GPIO_FN_TXD6, GPIO_FN_TXD7,
+	GPIO_FN_RTS1, GPIO_FN_RTS3, GPIO_FN_CTS1, GPIO_FN_CTS3,
+
+	/* RSPI */
+	GPIO_FN_RSPCK0, GPIO_FN_MOSI0,
+	GPIO_FN_MISO0_PF12, GPIO_FN_MISO1,
+	GPIO_FN_SSL00,
+	GPIO_FN_RSPCK1, GPIO_FN_MOSI1,
+	GPIO_FN_MISO1_PG19, GPIO_FN_SSL10,
+
+	/* IIC3 */
+	GPIO_FN_SCL0, GPIO_FN_SCL1, GPIO_FN_SCL2,
+	GPIO_FN_SDA2, GPIO_FN_SDA1, GPIO_FN_SDA0,
+
+	/* SSI */
+	GPIO_FN_SSISCK0, GPIO_FN_SSIWS0, GPIO_FN_SSITXD0, GPIO_FN_SSIRXD0,
+	GPIO_FN_SSIWS1, GPIO_FN_SSIWS2, GPIO_FN_SSIWS3,
+	GPIO_FN_SSISCK1, GPIO_FN_SSISCK2, GPIO_FN_SSISCK3,
+	GPIO_FN_SSIDATA1, GPIO_FN_SSIDATA2, GPIO_FN_SSIDATA3,
+	GPIO_FN_AUDIO_CLK,
+
+	/* SIOF */
+	GPIO_FN_SIOFTXD, GPIO_FN_SIOFRXD, GPIO_FN_SIOFSYNC, GPIO_FN_SIOFSCK,
+
+	/* SPDIF */
+	GPIO_FN_SPDIF_IN,
+	GPIO_FN_SPDIF_OUT,
+
+	/* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
+	GPIO_FN_FCE,
+	GPIO_FN_FRB,
+
+	/* VDC3 */
+	GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC,
+	GPIO_FN_DV_DATA7, GPIO_FN_DV_DATA6, GPIO_FN_DV_DATA5, GPIO_FN_DV_DATA4,
+	GPIO_FN_DV_DATA3, GPIO_FN_DV_DATA2, GPIO_FN_DV_DATA1, GPIO_FN_DV_DATA0,
+	GPIO_FN_LCD_CLK, GPIO_FN_LCD_EXTCLK,
+	GPIO_FN_LCD_VSYNC, GPIO_FN_LCD_HSYNC, GPIO_FN_LCD_DE,
+	GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14,
+	GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12,
+	GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10,
+	GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8,
+	GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6,
+	GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4,
+	GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2,
+	GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0,
+	GPIO_FN_LCD_M_DISP,
+};
+
+#endif /* __ASM_SH7264_H__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/sh7269.h
new file mode 100644
index 0000000..b887cc4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/sh7269.h
@@ -0,0 +1,219 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH7269_H__
+#define __ASM_SH7269_H__
+
+enum {
+	/* Port A */
+	GPIO_PA1, GPIO_PA0,
+
+	/* Port B */
+	GPIO_PB22, GPIO_PB21, GPIO_PB20,
+	GPIO_PB19, GPIO_PB18, GPIO_PB17, GPIO_PB16,
+	GPIO_PB15, GPIO_PB14, GPIO_PB13, GPIO_PB12,
+	GPIO_PB11, GPIO_PB10, GPIO_PB9, GPIO_PB8,
+	GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
+	GPIO_PB3, GPIO_PB2, GPIO_PB1,
+
+	/* Port C */
+	GPIO_PC8,
+	GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
+	GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
+
+	/* Port D */
+	GPIO_PD15, GPIO_PD14, GPIO_PD13, GPIO_PD12,
+	GPIO_PD11, GPIO_PD10, GPIO_PD9, GPIO_PD8,
+	GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
+	GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
+
+	/* Port E */
+	GPIO_PE7, GPIO_PE6, GPIO_PE5, GPIO_PE4,
+	GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
+
+	/* Port F */
+	GPIO_PF23, GPIO_PF22, GPIO_PF21, GPIO_PF20,
+	GPIO_PF19, GPIO_PF18, GPIO_PF17, GPIO_PF16,
+	GPIO_PF15, GPIO_PF14, GPIO_PF13, GPIO_PF12,
+	GPIO_PF11, GPIO_PF10, GPIO_PF9, GPIO_PF8,
+	GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
+	GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
+
+	/* Port G */
+	GPIO_PG27, GPIO_PG26, GPIO_PG25, GPIO_PG24,
+	GPIO_PG23, GPIO_PG22, GPIO_PG21, GPIO_PG20,
+	GPIO_PG19, GPIO_PG18, GPIO_PG17, GPIO_PG16,
+	GPIO_PG15, GPIO_PG14, GPIO_PG13, GPIO_PG12,
+	GPIO_PG11, GPIO_PG10, GPIO_PG9, GPIO_PG8,
+	GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
+	GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
+
+	/* Port H - Port H does not have a Data Register */
+
+	/* Port I - not on device */
+
+	/* Port J */
+	GPIO_PJ31, GPIO_PJ30, GPIO_PJ29, GPIO_PJ28,
+	GPIO_PJ27, GPIO_PJ26, GPIO_PJ25, GPIO_PJ24,
+	GPIO_PJ23, GPIO_PJ22, GPIO_PJ21, GPIO_PJ20,
+	GPIO_PJ19, GPIO_PJ18, GPIO_PJ17, GPIO_PJ16,
+	GPIO_PJ15, GPIO_PJ14, GPIO_PJ13, GPIO_PJ12,
+	GPIO_PJ11, GPIO_PJ10, GPIO_PJ9, GPIO_PJ8,
+	GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
+	GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
+
+	/* INTC: IRQ and PINT */
+	GPIO_FN_IRQ7_PG, GPIO_FN_IRQ6_PG, GPIO_FN_IRQ5_PG, GPIO_FN_IRQ4_PG,
+	GPIO_FN_IRQ3_PG, GPIO_FN_IRQ2_PG, GPIO_FN_IRQ1_PG, GPIO_FN_IRQ0_PG,
+	GPIO_FN_IRQ7_PF, GPIO_FN_IRQ6_PF, GPIO_FN_IRQ5_PF, GPIO_FN_IRQ4_PF,
+	GPIO_FN_IRQ3_PJ, GPIO_FN_IRQ2_PJ, GPIO_FN_IRQ1_PJ, GPIO_FN_IRQ0_PJ,
+	GPIO_FN_IRQ1_PC, GPIO_FN_IRQ0_PC,
+
+	GPIO_FN_PINT7_PG, GPIO_FN_PINT6_PG, GPIO_FN_PINT5_PG, GPIO_FN_PINT4_PG,
+	GPIO_FN_PINT3_PG, GPIO_FN_PINT2_PG, GPIO_FN_PINT1_PG, GPIO_FN_PINT0_PG,
+	GPIO_FN_PINT7_PH, GPIO_FN_PINT6_PH, GPIO_FN_PINT5_PH, GPIO_FN_PINT4_PH,
+	GPIO_FN_PINT3_PH, GPIO_FN_PINT2_PH, GPIO_FN_PINT1_PH, GPIO_FN_PINT0_PH,
+	GPIO_FN_PINT7_PJ, GPIO_FN_PINT6_PJ, GPIO_FN_PINT5_PJ, GPIO_FN_PINT4_PJ,
+	GPIO_FN_PINT3_PJ, GPIO_FN_PINT2_PJ, GPIO_FN_PINT1_PJ, GPIO_FN_PINT0_PJ,
+
+	/* WDT */
+	GPIO_FN_WDTOVF,
+
+	/* CAN */
+	GPIO_FN_CTX2, GPIO_FN_CRX2,
+	GPIO_FN_CTX1, GPIO_FN_CRX1,
+	GPIO_FN_CTX0, GPIO_FN_CRX0,
+	GPIO_FN_CTX0_CTX1, GPIO_FN_CRX0_CRX1,
+	GPIO_FN_CTX0_CTX1_CTX2, GPIO_FN_CRX0_CRX1_CRX2,
+	GPIO_FN_CTX2_PJ21, GPIO_FN_CRX2_PJ20,
+	GPIO_FN_CTX1_PJ23, GPIO_FN_CRX1_PJ22,
+	GPIO_FN_CTX0_CTX1_PJ23, GPIO_FN_CRX0_CRX1_PJ22,
+	GPIO_FN_CTX0_CTX1_CTX2_PJ21, GPIO_FN_CRX0_CRX1_CRX2_PJ20,
+
+	/* DMAC */
+	GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0,
+	GPIO_FN_TEND1, GPIO_FN_DACK1, GPIO_FN_DREQ1,
+
+	/* ADC */
+	GPIO_FN_ADTRG,
+
+	/* BSC */
+	GPIO_FN_A25, GPIO_FN_A24,
+	GPIO_FN_A23, GPIO_FN_A22, GPIO_FN_A21, GPIO_FN_A20,
+	GPIO_FN_A19, GPIO_FN_A18, GPIO_FN_A17, GPIO_FN_A16,
+	GPIO_FN_A15, GPIO_FN_A14, GPIO_FN_A13, GPIO_FN_A12,
+	GPIO_FN_A11, GPIO_FN_A10, GPIO_FN_A9, GPIO_FN_A8,
+	GPIO_FN_A7, GPIO_FN_A6, GPIO_FN_A5, GPIO_FN_A4,
+	GPIO_FN_A3, GPIO_FN_A2, GPIO_FN_A1, GPIO_FN_A0,
+	GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
+	GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
+	GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
+	GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
+
+	GPIO_FN_BS,
+	GPIO_FN_CS4, GPIO_FN_CS3, GPIO_FN_CS2, GPIO_FN_CS1, GPIO_FN_CS0,
+	GPIO_FN_CS5CE1A,
+	GPIO_FN_CE2A, GPIO_FN_CE2B,
+	GPIO_FN_RD, GPIO_FN_RDWR,
+	GPIO_FN_WE3ICIOWRAHDQMUU, GPIO_FN_WE2ICIORDDQMUL,
+	GPIO_FN_WE1DQMUWE, GPIO_FN_WE0DQML,
+	GPIO_FN_RAS, GPIO_FN_CAS, GPIO_FN_CKE,
+	GPIO_FN_WAIT, GPIO_FN_BREQ, GPIO_FN_BACK,
+	GPIO_FN_IOIS16,
+
+	/* TMU */
+	GPIO_FN_TIOC4D, GPIO_FN_TIOC4C, GPIO_FN_TIOC4B, GPIO_FN_TIOC4A,
+	GPIO_FN_TIOC3D, GPIO_FN_TIOC3C, GPIO_FN_TIOC3B, GPIO_FN_TIOC3A,
+	GPIO_FN_TIOC2B, GPIO_FN_TIOC1B, GPIO_FN_TIOC2A, GPIO_FN_TIOC1A,
+	GPIO_FN_TIOC0D, GPIO_FN_TIOC0C, GPIO_FN_TIOC0B, GPIO_FN_TIOC0A,
+	GPIO_FN_TCLKD, GPIO_FN_TCLKC, GPIO_FN_TCLKB, GPIO_FN_TCLKA,
+
+	/* SSU */
+	GPIO_FN_SCS0_PD, GPIO_FN_SSO0_PD, GPIO_FN_SSI0_PD, GPIO_FN_SSCK0_PD,
+	GPIO_FN_SCS0_PF, GPIO_FN_SSO0_PF, GPIO_FN_SSI0_PF, GPIO_FN_SSCK0_PF,
+	GPIO_FN_SCS1_PD, GPIO_FN_SSO1_PD, GPIO_FN_SSI1_PD, GPIO_FN_SSCK1_PD,
+	GPIO_FN_SCS1_PF, GPIO_FN_SSO1_PF, GPIO_FN_SSI1_PF, GPIO_FN_SSCK1_PF,
+
+	/* SCIF */
+	GPIO_FN_SCK0, GPIO_FN_RXD0, GPIO_FN_TXD0,
+	GPIO_FN_SCK1, GPIO_FN_RXD1, GPIO_FN_TXD1, GPIO_FN_RTS1, GPIO_FN_CTS1,
+	GPIO_FN_SCK2, GPIO_FN_RXD2, GPIO_FN_TXD2,
+	GPIO_FN_SCK3, GPIO_FN_RXD3, GPIO_FN_TXD3,
+	GPIO_FN_SCK4, GPIO_FN_RXD4, GPIO_FN_TXD4,
+	GPIO_FN_SCK5, GPIO_FN_RXD5, GPIO_FN_TXD5, GPIO_FN_RTS5, GPIO_FN_CTS5,
+	GPIO_FN_SCK6, GPIO_FN_RXD6, GPIO_FN_TXD6,
+	GPIO_FN_SCK7, GPIO_FN_RXD7, GPIO_FN_TXD7, GPIO_FN_RTS7, GPIO_FN_CTS7,
+
+	/* RSPI */
+	GPIO_FN_MISO0_PJ19, GPIO_FN_MISO0_PB20,
+	GPIO_FN_MOSI0_PJ18, GPIO_FN_MOSI0_PB19,
+	GPIO_FN_SSL00_PJ17, GPIO_FN_SSL00_PB18,
+	GPIO_FN_RSPCK0_PJ16, GPIO_FN_RSPCK0_PB17,
+	GPIO_FN_RSPCK1, GPIO_FN_MOSI1,
+	GPIO_FN_MISO1, GPIO_FN_SSL10,
+
+	/* IIC3 */
+	GPIO_FN_SCL0, GPIO_FN_SCL1, GPIO_FN_SCL2,
+	GPIO_FN_SDA2, GPIO_FN_SDA1, GPIO_FN_SDA0,
+
+	/* SSI */
+	GPIO_FN_SSISCK0, GPIO_FN_SSIWS0, GPIO_FN_SSITXD0, GPIO_FN_SSIRXD0,
+	GPIO_FN_SSIWS1, GPIO_FN_SSIWS2, GPIO_FN_SSIWS3,
+	GPIO_FN_SSISCK1, GPIO_FN_SSISCK2, GPIO_FN_SSISCK3,
+	GPIO_FN_SSIDATA1, GPIO_FN_SSIDATA2, GPIO_FN_SSIDATA3,
+	GPIO_FN_AUDIO_CLK,
+	GPIO_FN_AUDIO_XOUT,
+
+	/* SIOF */
+	GPIO_FN_SIOFTXD, GPIO_FN_SIOFRXD, GPIO_FN_SIOFSYNC, GPIO_FN_SIOFSCK,
+
+	/* SPDIF */
+	GPIO_FN_SPDIF_IN,
+	GPIO_FN_SPDIF_OUT,
+
+	/* NANDFMC  */ /* NOTE Controller is not available in boot mode 0 */
+	GPIO_FN_FCE,
+	GPIO_FN_FRB,
+
+	/* VDC */
+	GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC,
+	GPIO_FN_DV_DATA23, GPIO_FN_DV_DATA22,
+	GPIO_FN_DV_DATA21, GPIO_FN_DV_DATA20,
+	GPIO_FN_DV_DATA19, GPIO_FN_DV_DATA18,
+	GPIO_FN_DV_DATA17, GPIO_FN_DV_DATA16,
+	GPIO_FN_DV_DATA15, GPIO_FN_DV_DATA14,
+	GPIO_FN_DV_DATA13, GPIO_FN_DV_DATA12,
+	GPIO_FN_DV_DATA11, GPIO_FN_DV_DATA10,
+	GPIO_FN_DV_DATA9, GPIO_FN_DV_DATA8,
+	GPIO_FN_DV_DATA7, GPIO_FN_DV_DATA6,
+	GPIO_FN_DV_DATA5, GPIO_FN_DV_DATA4,
+	GPIO_FN_DV_DATA3, GPIO_FN_DV_DATA2,
+	GPIO_FN_DV_DATA1, GPIO_FN_DV_DATA0,
+	GPIO_FN_LCD_CLK, GPIO_FN_LCD_EXTCLK,
+	GPIO_FN_LCD_VSYNC, GPIO_FN_LCD_HSYNC, GPIO_FN_LCD_DE,
+	GPIO_FN_LCD_DATA23_PG23, GPIO_FN_LCD_DATA22_PG22,
+	GPIO_FN_LCD_DATA21_PG21, GPIO_FN_LCD_DATA20_PG20,
+	GPIO_FN_LCD_DATA19_PG19, GPIO_FN_LCD_DATA18_PG18,
+	GPIO_FN_LCD_DATA17_PG17, GPIO_FN_LCD_DATA16_PG16,
+	GPIO_FN_LCD_DATA15_PG15, GPIO_FN_LCD_DATA14_PG14,
+	GPIO_FN_LCD_DATA13_PG13, GPIO_FN_LCD_DATA12_PG12,
+	GPIO_FN_LCD_DATA11_PG11, GPIO_FN_LCD_DATA10_PG10,
+	GPIO_FN_LCD_DATA9_PG9, GPIO_FN_LCD_DATA8_PG8,
+	GPIO_FN_LCD_DATA7_PG7, GPIO_FN_LCD_DATA6_PG6,
+	GPIO_FN_LCD_DATA5_PG5, GPIO_FN_LCD_DATA4_PG4,
+	GPIO_FN_LCD_DATA3_PG3, GPIO_FN_LCD_DATA2_PG2,
+	GPIO_FN_LCD_DATA1_PG1, GPIO_FN_LCD_DATA0_PG0,
+	GPIO_FN_LCD_DATA23_PJ23, GPIO_FN_LCD_DATA22_PJ22,
+	GPIO_FN_LCD_DATA21_PJ21, GPIO_FN_LCD_DATA20_PJ20,
+	GPIO_FN_LCD_DATA19_PJ19, GPIO_FN_LCD_DATA18_PJ18,
+	GPIO_FN_LCD_DATA17_PJ17, GPIO_FN_LCD_DATA16_PJ16,
+	GPIO_FN_LCD_DATA15_PJ15, GPIO_FN_LCD_DATA14_PJ14,
+	GPIO_FN_LCD_DATA13_PJ13, GPIO_FN_LCD_DATA12_PJ12,
+	GPIO_FN_LCD_DATA11_PJ11, GPIO_FN_LCD_DATA10_PJ10,
+	GPIO_FN_LCD_DATA9_PJ9, GPIO_FN_LCD_DATA8_PJ8,
+	GPIO_FN_LCD_DATA7_PJ7, GPIO_FN_LCD_DATA6_PJ6,
+	GPIO_FN_LCD_DATA5_PJ5, GPIO_FN_LCD_DATA4_PJ4,
+	GPIO_FN_LCD_DATA3_PJ3, GPIO_FN_LCD_DATA2_PJ2,
+	GPIO_FN_LCD_DATA1_PJ1, GPIO_FN_LCD_DATA0_PJ0,
+	GPIO_FN_LCD_M_DISP,
+};
+
+#endif /* __ASM_SH7269_H__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/watchdog.h
new file mode 100644
index 0000000..e7e8259
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh2a/cpu/watchdog.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/watchdog.h>
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/adc.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/adc.h
new file mode 100644
index 0000000..2ee206c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/adc.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_CPU_SH3_ADC_H
+#define __ASM_CPU_SH3_ADC_H
+
+/*
+ * Copyright (C) 2004  Andriy Skulysh
+ */
+
+
+#define ADDRAH	0xa4000080
+#define ADDRAL	0xa4000082
+#define ADDRBH	0xa4000084
+#define ADDRBL	0xa4000086
+#define ADDRCH	0xa4000088
+#define ADDRCL	0xa400008a
+#define ADDRDH	0xa400008c
+#define ADDRDL	0xa400008e
+#define ADCSR	0xa4000090
+
+#define ADCSR_ADF	0x80
+#define ADCSR_ADIE	0x40
+#define ADCSR_ADST	0x20
+#define ADCSR_MULTI	0x10
+#define ADCSR_CKS	0x08
+#define ADCSR_CH_MASK	0x07
+
+#define ADCR	0xa4000092
+
+#endif /* __ASM_CPU_SH3_ADC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/cache.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/cache.h
new file mode 100644
index 0000000..29700fd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/cache.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/cpu-sh3/cache.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_CACHE_H
+#define __ASM_CPU_SH3_CACHE_H
+
+#define L1_CACHE_SHIFT	4
+
+#define SH_CACHE_VALID		1
+#define SH_CACHE_UPDATED	2
+#define SH_CACHE_COMBINED	4
+#define SH_CACHE_ASSOC		8
+
+#define SH_CCR		0xffffffec	/* Address of Cache Control Register */
+
+#define CCR_CACHE_CE	0x01	/* Cache Enable */
+#define CCR_CACHE_WT	0x02	/* Write-Through (for P0,U0,P3) (else writeback) */
+#define CCR_CACHE_CB	0x04	/* Write-Back (for P1) (else writethrough) */
+#define CCR_CACHE_CF	0x08	/* Cache Flush */
+#define CCR_CACHE_ORA	0x20	/* RAM mode */
+
+#define CACHE_OC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_PHYSADDR_MASK	0x1ffffc00
+
+#define CCR_CACHE_ENABLE	CCR_CACHE_CE
+#define CCR_CACHE_INVALIDATE	CCR_CACHE_CF
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
+#define CCR3_REG	0xa40000b4
+#define CCR_CACHE_16KB  0x00010000
+#define CCR_CACHE_32KB	0x00020000
+#endif
+
+#endif /* __ASM_CPU_SH3_CACHE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/dac.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/dac.h
new file mode 100644
index 0000000..fd02331
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/dac.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_CPU_SH3_DAC_H
+#define __ASM_CPU_SH3_DAC_H
+
+/*
+ * Copyright (C) 2003  Andriy Skulysh
+ */
+
+
+#define DADR0	0xa40000a0
+#define DADR1	0xa40000a2
+#define DACR	0xa40000a4
+#define DACR_DAOE1	0x80
+#define DACR_DAOE0	0x40
+#define DACR_DAE	0x20
+
+
+static __inline__ void sh_dac_enable(int channel)
+{
+	unsigned char v;
+	v = __raw_readb(DACR);
+	if(channel) v |= DACR_DAOE1;
+	else v |= DACR_DAOE0;
+	__raw_writeb(v,DACR);
+}
+
+static __inline__ void sh_dac_disable(int channel)
+{
+	unsigned char v;
+	v = __raw_readb(DACR);
+	if(channel) v &= ~DACR_DAOE1;
+	else v &= ~DACR_DAOE0;
+	__raw_writeb(v,DACR);
+}
+
+static __inline__ void sh_dac_output(u8 value, int channel)
+{
+	if(channel) __raw_writeb(value,DADR1);
+	else __raw_writeb(value,DADR0);
+}
+
+#endif /* __ASM_CPU_SH3_DAC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/dma-register.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/dma-register.h
new file mode 100644
index 0000000..2349e48
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/dma-register.h
@@ -0,0 +1,41 @@
+/*
+ * SH3 CPU-specific DMA definitions, used by both DMA drivers
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef CPU_DMA_REGISTER_H
+#define CPU_DMA_REGISTER_H
+
+#define CHCR_TS_LOW_MASK	0x18
+#define CHCR_TS_LOW_SHIFT	3
+#define CHCR_TS_HIGH_MASK	0
+#define CHCR_TS_HIGH_SHIFT	0
+
+#define DMAOR_INIT	DMAOR_DME
+
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ */
+enum {
+	XMIT_SZ_8BIT,
+	XMIT_SZ_16BIT,
+	XMIT_SZ_32BIT,
+	XMIT_SZ_128BIT,
+};
+
+/* log2(size / 8) - used to calculate number of transfers */
+#define TS_SHIFT {			\
+	[XMIT_SZ_8BIT]		= 0,	\
+	[XMIT_SZ_16BIT]		= 1,	\
+	[XMIT_SZ_32BIT]		= 2,	\
+	[XMIT_SZ_128BIT]	= 4,	\
+}
+
+#define TS_INDEX2VAL(i)	(((i) & 3) << CHCR_TS_LOW_SHIFT)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/dma.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/dma.h
new file mode 100644
index 0000000..cd13968
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/dma.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_CPU_SH3_DMA_H
+#define __ASM_CPU_SH3_DMA_H
+
+#include <linux/sh_intc.h>
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7712)
+#define SH_DMAC_BASE0	0xa4010020
+#else /* SH7705/06/07/09 */
+#define SH_DMAC_BASE0	0xa4000020
+#endif
+
+#define DMTE0_IRQ	evt2irq(0x800)
+#define DMTE4_IRQ	evt2irq(0xb80)
+
+#endif /* __ASM_CPU_SH3_DMA_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/freq.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/freq.h
new file mode 100644
index 0000000..53c6230
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/freq.h
@@ -0,0 +1,27 @@
+/*
+ * include/asm-sh/cpu-sh3/freq.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_FREQ_H
+#define __ASM_CPU_SH3_FREQ_H
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7712
+#define FRQCR			0xA415FF80
+#else
+#define FRQCR			0xffffff80
+#endif
+
+#define MIN_DIVISOR_NR		0
+#define MAX_DIVISOR_NR		4
+
+#define FRQCR_CKOEN	0x0100
+#define FRQCR_PLLEN	0x0080
+#define FRQCR_PSTBY	0x0040
+
+#endif /* __ASM_CPU_SH3_FREQ_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/gpio.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/gpio.h
new file mode 100644
index 0000000..9a22b88
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/gpio.h
@@ -0,0 +1,81 @@
+/*
+ *  include/asm-sh/cpu-sh3/gpio.h
+ *
+ *  Copyright (C) 2007  Markus Brunner, Mark Jonas
+ *
+ *  Addresses for the Pin Function Controller
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _CPU_SH3_GPIO_H
+#define _CPU_SH3_GPIO_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
+
+/* Control registers */
+#define PORT_PACR	0xA4050100UL
+#define PORT_PBCR	0xA4050102UL
+#define PORT_PCCR	0xA4050104UL
+#define PORT_PDCR	0xA4050106UL
+#define PORT_PECR	0xA4050108UL
+#define PORT_PFCR	0xA405010AUL
+#define PORT_PGCR	0xA405010CUL
+#define PORT_PHCR	0xA405010EUL
+#define PORT_PJCR	0xA4050110UL
+#define PORT_PKCR	0xA4050112UL
+#define PORT_PLCR	0xA4050114UL
+#define PORT_PMCR	0xA4050116UL
+#define PORT_PPCR	0xA4050118UL
+#define PORT_PRCR	0xA405011AUL
+#define PORT_PSCR	0xA405011CUL
+#define PORT_PTCR	0xA405011EUL
+#define PORT_PUCR	0xA4050120UL
+#define PORT_PVCR	0xA4050122UL
+
+/* Data registers */
+#define PORT_PADR	0xA4050140UL
+/* Address of PORT_PBDR is wrong in the datasheet, see errata 2005-09-21 */
+#define PORT_PBDR	0xA4050142UL
+#define PORT_PCDR	0xA4050144UL
+#define PORT_PDDR	0xA4050146UL
+#define PORT_PEDR	0xA4050148UL
+#define PORT_PFDR	0xA405014AUL
+#define PORT_PGDR	0xA405014CUL
+#define PORT_PHDR	0xA405014EUL
+#define PORT_PJDR	0xA4050150UL
+#define PORT_PKDR	0xA4050152UL
+#define PORT_PLDR	0xA4050154UL
+#define PORT_PMDR	0xA4050156UL
+#define PORT_PPDR	0xA4050158UL
+#define PORT_PRDR	0xA405015AUL
+#define PORT_PSDR	0xA405015CUL
+#define PORT_PTDR	0xA405015EUL
+#define PORT_PUDR	0xA4050160UL
+#define PORT_PVDR	0xA4050162UL
+
+/* Pin Select Registers */
+#define PORT_PSELA	0xA4050124UL
+#define PORT_PSELB	0xA4050126UL
+#define PORT_PSELC	0xA4050128UL
+#define PORT_PSELD	0xA405012AUL
+
+#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
+
+/* Control registers */
+#define PORT_PACR       0xa4000100UL
+#define PORT_PBCR       0xa4000102UL
+#define PORT_PCCR       0xa4000104UL
+#define PORT_PFCR       0xa400010aUL
+
+/* Data registers */
+#define PORT_PADR       0xa4000120UL
+#define PORT_PBDR       0xa4000122UL
+#define PORT_PCDR       0xa4000124UL
+#define PORT_PFDR       0xa400012aUL
+
+#endif
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/mmu_context.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/mmu_context.h
new file mode 100644
index 0000000..0c7c735
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/mmu_context.h
@@ -0,0 +1,45 @@
+/*
+ * include/asm-sh/cpu-sh3/mmu_context.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_MMU_CONTEXT_H
+#define __ASM_CPU_SH3_MMU_CONTEXT_H
+
+#define MMU_PTEH	0xFFFFFFF0	/* Page table entry register HIGH */
+#define MMU_PTEL	0xFFFFFFF4	/* Page table entry register LOW */
+#define MMU_TTB		0xFFFFFFF8	/* Translation table base register */
+#define MMU_TEA		0xFFFFFFFC	/* TLB Exception Address */
+
+#define MMUCR		0xFFFFFFE0	/* MMU Control Register */
+#define MMUCR_TI	(1 << 2)	/* TLB flush bit */
+
+#define MMU_TLB_ADDRESS_ARRAY	0xF2000000
+#define MMU_PAGE_ASSOC_BIT	0x80
+
+#define MMU_NTLB_ENTRIES	128	/* for 7708 */
+#define MMU_NTLB_WAYS		4
+#define MMU_CONTROL_INIT	0x007	/* SV=0, TF=1, IX=1, AT=1 */
+
+#define TRA	0xffffffd0
+#define EXPEVT	0xffffffd4
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7712) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
+#define INTEVT	0xa4000000	/* INTEVTE2(0xa4000000) */
+#else
+#define INTEVT	0xffffffd8
+#endif
+
+#endif /* __ASM_CPU_SH3_MMU_CONTEXT_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/serial.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/serial.h
new file mode 100644
index 0000000..7b2ce6e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/serial.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __CPU_SH3_SERIAL_H
+#define __CPU_SH3_SERIAL_H
+
+#include <linux/serial_sci.h>
+
+extern struct plat_sci_port_ops sh770x_sci_port_ops;
+extern struct plat_sci_port_ops sh7710_sci_port_ops;
+extern struct plat_sci_port_ops sh7720_sci_port_ops;
+
+#endif /* __CPU_SH3_SERIAL_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/sh7720.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/sh7720.h
new file mode 100644
index 0000000..449790c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/sh7720.h
@@ -0,0 +1,175 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH7720_H__
+#define __ASM_SH7720_H__
+
+enum {
+	/* PTA */
+	GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
+	GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
+
+	/* PTB */
+	GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
+	GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
+
+	/* PTC */
+	GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
+	GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
+
+	/* PTD */
+	GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
+	GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
+
+	/* PTE */
+	GPIO_PTE6, GPIO_PTE5, GPIO_PTE4, GPIO_PTE3,
+	GPIO_PTE2, GPIO_PTE1, GPIO_PTE0,
+
+	/* PTF */
+	GPIO_PTF6, GPIO_PTF5, GPIO_PTF4, GPIO_PTF3,
+	GPIO_PTF2, GPIO_PTF1, GPIO_PTF0, GPIO_PTG6,
+
+	/* PTG */
+	GPIO_PTG5, GPIO_PTG4, GPIO_PTG3, GPIO_PTG2,
+	GPIO_PTG1, GPIO_PTG0,
+
+	/* PTH */
+	GPIO_PTH6, GPIO_PTH5, GPIO_PTH4, GPIO_PTH3,
+	GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
+
+	/* PTJ */
+	GPIO_PTJ6, GPIO_PTJ5, GPIO_PTJ4, GPIO_PTJ3,
+	GPIO_PTJ2, GPIO_PTJ1, GPIO_PTJ0,
+
+	/* PTK */
+	GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
+
+	/* PTL */
+	GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4, GPIO_PTL3,
+
+	/* PTM */
+	GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
+	GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
+
+	/* PTP */
+	GPIO_PTP4, GPIO_PTP3, GPIO_PTP2, GPIO_PTP1, GPIO_PTP0,
+
+	/* PTR */
+	GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
+	GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
+
+	/* PTS */
+	GPIO_PTS4, GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
+
+	/* PTT */
+	GPIO_PTT4, GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
+
+	/* PTU */
+	GPIO_PTU4, GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
+
+	/* PTV */
+	GPIO_PTV4, GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
+
+	/* BSC */
+	GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
+	GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
+	GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
+	GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
+	GPIO_FN_IOIS16, GPIO_FN_RAS, GPIO_FN_CAS, GPIO_FN_CKE,
+	GPIO_FN_CS5B_CE1A, GPIO_FN_CS6B_CE1B,
+	GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
+	GPIO_FN_A21, GPIO_FN_A20, GPIO_FN_A19, GPIO_FN_A0,
+	GPIO_FN_REFOUT, GPIO_FN_IRQOUT,
+
+	/* LCDC */
+	GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14,
+	GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12,
+	GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10,
+	GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8,
+	GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6,
+	GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4,
+	GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2,
+	GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0,
+	GPIO_FN_LCD_M_DISP,
+	GPIO_FN_LCD_CL1, GPIO_FN_LCD_CL2,
+	GPIO_FN_LCD_DON, GPIO_FN_LCD_FLM,
+	GPIO_FN_LCD_VEPWC, GPIO_FN_LCD_VCPWC,
+
+	/* AFEIF */
+	GPIO_FN_AFE_RXIN, GPIO_FN_AFE_RDET,
+	GPIO_FN_AFE_FS, GPIO_FN_AFE_TXOUT,
+	GPIO_FN_AFE_SCLK, GPIO_FN_AFE_RLYCNT,
+	GPIO_FN_AFE_HC1,
+
+	/* IIC */
+	GPIO_FN_IIC_SCL, GPIO_FN_IIC_SDA,
+
+	/* DAC */
+	GPIO_FN_DA1, GPIO_FN_DA0,
+
+	/* ADC */
+	GPIO_FN_AN3, GPIO_FN_AN2, GPIO_FN_AN1, GPIO_FN_AN0, GPIO_FN_ADTRG,
+
+	/* USB */
+	GPIO_FN_USB1D_RCV, GPIO_FN_USB1D_TXSE0,
+	GPIO_FN_USB1D_TXDPLS, GPIO_FN_USB1D_DMNS,
+	GPIO_FN_USB1D_DPLS, GPIO_FN_USB1D_SPEED,
+	GPIO_FN_USB1D_TXENL, GPIO_FN_USB2_PWR_EN,
+	GPIO_FN_USB1_PWR_EN_USBF_UPLUP, GPIO_FN_USB1D_SUSPEND,
+
+	/* INTC */
+	GPIO_FN_IRQ5, GPIO_FN_IRQ4,
+	GPIO_FN_IRQ3_IRL3, GPIO_FN_IRQ2_IRL2,
+	GPIO_FN_IRQ1_IRL1, GPIO_FN_IRQ0_IRL0,
+
+	/* PCC */
+	GPIO_FN_PCC_REG, GPIO_FN_PCC_DRV,
+	GPIO_FN_PCC_BVD2, GPIO_FN_PCC_BVD1,
+	GPIO_FN_PCC_CD2, GPIO_FN_PCC_CD1,
+	GPIO_FN_PCC_RESET, GPIO_FN_PCC_RDY,
+	GPIO_FN_PCC_VS2, GPIO_FN_PCC_VS1,
+
+	/* HUDI */
+	GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
+	GPIO_FN_AUDCK, GPIO_FN_AUDSYNC, GPIO_FN_ASEBRKAK, GPIO_FN_TRST,
+	GPIO_FN_TMS, GPIO_FN_TDO, GPIO_FN_TDI, GPIO_FN_TCK,
+
+	/* DMAC */
+	GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DACK0, GPIO_FN_DREQ0,
+	GPIO_FN_TEND1, GPIO_FN_TEND0,
+
+	/* SIOF0 */
+	GPIO_FN_SIOF0_SYNC, GPIO_FN_SIOF0_MCLK,
+	GPIO_FN_SIOF0_TXD, GPIO_FN_SIOF0_RXD,
+	GPIO_FN_SIOF0_SCK,
+
+	/* SIOF1 */
+	GPIO_FN_SIOF1_SYNC, GPIO_FN_SIOF1_MCLK,
+	GPIO_FN_SIOF1_TXD, GPIO_FN_SIOF1_RXD,
+	GPIO_FN_SIOF1_SCK,
+
+	/* SCIF0 */
+	GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD,
+	GPIO_FN_SCIF0_RTS, GPIO_FN_SCIF0_CTS, GPIO_FN_SCIF0_SCK,
+
+	/* SCIF1 */
+	GPIO_FN_SCIF1_TXD, GPIO_FN_SCIF1_RXD,
+	GPIO_FN_SCIF1_RTS, GPIO_FN_SCIF1_CTS, GPIO_FN_SCIF1_SCK,
+
+	/* TPU */
+	GPIO_FN_TPU_TO1, GPIO_FN_TPU_TO0,
+	GPIO_FN_TPU_TI3B, GPIO_FN_TPU_TI3A,
+	GPIO_FN_TPU_TI2B, GPIO_FN_TPU_TI2A,
+	GPIO_FN_TPU_TO3, GPIO_FN_TPU_TO2,
+
+	/* SIM */
+	GPIO_FN_SIM_D, GPIO_FN_SIM_CLK, GPIO_FN_SIM_RST,
+
+	/* MMC */
+	GPIO_FN_MMC_DAT, GPIO_FN_MMC_CMD,
+	GPIO_FN_MMC_CLK, GPIO_FN_MMC_VDDON,
+	GPIO_FN_MMC_ODMOD,
+
+	/* SYSC */
+	GPIO_FN_STATUS0, GPIO_FN_STATUS1,
+};
+
+#endif /* __ASM_SH7720_H__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/watchdog.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/watchdog.h
new file mode 100644
index 0000000..4ee0347
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh3/cpu/watchdog.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-sh/cpu-sh3/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_WATCHDOG_H
+#define __ASM_CPU_SH3_WATCHDOG_H
+
+/* Register definitions */
+#define WTCNT		0xffffff84
+#define WTCSR		0xffffff86
+
+/* Bit definitions */
+#define WTCSR_TME	0x80
+#define WTCSR_WT	0x40
+#define WTCSR_RSTS	0x20
+#define WTCSR_WOVF	0x10
+#define WTCSR_IOVF	0x08
+
+#endif /* __ASM_CPU_SH3_WATCHDOG_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/addrspace.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/addrspace.h
new file mode 100644
index 0000000..d51da25
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/addrspace.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Kaz Kojima
+ *
+ * Defitions for the address spaces of the SH-4 CPUs.
+ */
+#ifndef __ASM_CPU_SH4_ADDRSPACE_H
+#define __ASM_CPU_SH4_ADDRSPACE_H
+
+#define P0SEG		0x00000000
+#define P1SEG		0x80000000
+#define P2SEG		0xa0000000
+#define P3SEG		0xc0000000
+#define P4SEG		0xe0000000
+
+/* Detailed P4SEG  */
+#define P4SEG_STORE_QUE	(P4SEG)
+#define P4SEG_IC_ADDR	0xf0000000
+#define P4SEG_IC_DATA	0xf1000000
+#define P4SEG_ITLB_ADDR	0xf2000000
+#define P4SEG_ITLB_DATA	0xf3000000
+#define P4SEG_OC_ADDR	0xf4000000
+#define P4SEG_OC_DATA	0xf5000000
+#define P4SEG_TLB_ADDR	0xf6000000
+#define P4SEG_TLB_DATA	0xf7000000
+#define P4SEG_REG_BASE	0xff000000
+
+#define PA_AREA0	0x00000000
+#define PA_AREA1	0x04000000
+#define PA_AREA2	0x08000000
+#define PA_AREA3	0x0c000000
+#define PA_AREA4	0x10000000
+#define PA_AREA5	0x14000000
+#define PA_AREA6	0x18000000
+#define PA_AREA7	0x1c000000
+
+#define PA_AREA5_IO	0xb4000000	/* Area 5 IO Memory */
+#define PA_AREA6_IO	0xb8000000	/* Area 6 IO Memory */
+
+#endif /* __ASM_CPU_SH4_ADDRSPACE_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/cache.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/cache.h
new file mode 100644
index 0000000..92c4cd1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/cache.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-sh/cpu-sh4/cache.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_CACHE_H
+#define __ASM_CPU_SH4_CACHE_H
+
+#define L1_CACHE_SHIFT	5
+
+#define SH_CACHE_VALID		1
+#define SH_CACHE_UPDATED	2
+#define SH_CACHE_COMBINED	4
+#define SH_CACHE_ASSOC		8
+
+#define SH_CCR		0xff00001c	/* Address of Cache Control Register */
+#define CCR_CACHE_OCE	0x0001	/* Operand Cache Enable */
+#define CCR_CACHE_WT	0x0002	/* Write-Through (for P0,U0,P3) (else writeback)*/
+#define CCR_CACHE_CB	0x0004	/* Copy-Back (for P1) (else writethrough) */
+#define CCR_CACHE_OCI	0x0008	/* OC Invalidate */
+#define CCR_CACHE_ORA	0x0020	/* OC RAM Mode */
+#define CCR_CACHE_OIX	0x0080	/* OC Index Enable */
+#define CCR_CACHE_ICE	0x0100	/* Instruction Cache Enable */
+#define CCR_CACHE_ICI	0x0800	/* IC Invalidate */
+#define CCR_CACHE_IIX	0x8000	/* IC Index Enable */
+#ifndef CONFIG_CPU_SH4A
+#define CCR_CACHE_EMODE	0x80000000	/* EMODE Enable */
+#endif
+
+/* Default CCR setup: 8k+16k-byte cache,P1-wb,enable */
+#define CCR_CACHE_ENABLE	(CCR_CACHE_OCE|CCR_CACHE_ICE)
+#define CCR_CACHE_INVALIDATE	(CCR_CACHE_OCI|CCR_CACHE_ICI)
+
+#define CACHE_IC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_OC_ADDRESS_ARRAY	0xf4000000
+
+#define RAMCR			0xFF000074
+
+#endif /* __ASM_CPU_SH4_CACHE_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/dma-register.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/dma-register.h
new file mode 100644
index 0000000..9cd81e5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/dma-register.h
@@ -0,0 +1,101 @@
+/*
+ * SH4 CPU-specific DMA definitions, used by both DMA drivers
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef CPU_DMA_REGISTER_H
+#define CPU_DMA_REGISTER_H
+
+/* SH7751/7760/7780 DMA IRQ sources */
+
+#ifdef CONFIG_CPU_SH4A
+
+#define DMAOR_INIT	DMAOR_DME
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7343)
+#define CHCR_TS_LOW_MASK	0x00000018
+#define CHCR_TS_LOW_SHIFT	3
+#define CHCR_TS_HIGH_MASK	0
+#define CHCR_TS_HIGH_SHIFT	0
+#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7724) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7730) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7786)
+#define CHCR_TS_LOW_MASK	0x00000018
+#define CHCR_TS_LOW_SHIFT	3
+#define CHCR_TS_HIGH_MASK	0x00300000
+#define CHCR_TS_HIGH_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7785)
+#define CHCR_TS_LOW_MASK	0x00000018
+#define CHCR_TS_LOW_SHIFT	3
+#define CHCR_TS_HIGH_MASK	0x00100000
+#define CHCR_TS_HIGH_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
+#endif
+
+/* Transmit sizes and respective CHCR register values */
+enum {
+	XMIT_SZ_8BIT		= 0,
+	XMIT_SZ_16BIT		= 1,
+	XMIT_SZ_32BIT		= 2,
+	XMIT_SZ_64BIT		= 7,
+	XMIT_SZ_128BIT		= 3,
+	XMIT_SZ_256BIT		= 4,
+	XMIT_SZ_128BIT_BLK	= 0xb,
+	XMIT_SZ_256BIT_BLK	= 0xc,
+};
+
+/* log2(size / 8) - used to calculate number of transfers */
+#define TS_SHIFT {			\
+	[XMIT_SZ_8BIT]		= 0,	\
+	[XMIT_SZ_16BIT]		= 1,	\
+	[XMIT_SZ_32BIT]		= 2,	\
+	[XMIT_SZ_64BIT]		= 3,	\
+	[XMIT_SZ_128BIT]	= 4,	\
+	[XMIT_SZ_256BIT]	= 5,	\
+	[XMIT_SZ_128BIT_BLK]	= 4,	\
+	[XMIT_SZ_256BIT_BLK]	= 5,	\
+}
+
+#define TS_INDEX2VAL(i)	((((i) & 3) << CHCR_TS_LOW_SHIFT) | \
+			 (((i) & 0xc) << CHCR_TS_HIGH_SHIFT))
+
+#else /* CONFIG_CPU_SH4A */
+
+#define DMAOR_INIT	(0x8000 | DMAOR_DME)
+
+#define CHCR_TS_LOW_MASK	0x70
+#define CHCR_TS_LOW_SHIFT	4
+#define CHCR_TS_HIGH_MASK	0
+#define CHCR_TS_HIGH_SHIFT	0
+
+/* Transmit sizes and respective CHCR register values */
+enum {
+	XMIT_SZ_8BIT	= 1,
+	XMIT_SZ_16BIT	= 2,
+	XMIT_SZ_32BIT	= 3,
+	XMIT_SZ_64BIT	= 0,
+	XMIT_SZ_256BIT	= 4,
+};
+
+/* log2(size / 8) - used to calculate number of transfers */
+#define TS_SHIFT {			\
+	[XMIT_SZ_8BIT]		= 0,	\
+	[XMIT_SZ_16BIT]		= 1,	\
+	[XMIT_SZ_32BIT]		= 2,	\
+	[XMIT_SZ_64BIT]		= 3,	\
+	[XMIT_SZ_256BIT]	= 5,	\
+}
+
+#define TS_INDEX2VAL(i)	(((i) & 7) << CHCR_TS_LOW_SHIFT)
+
+#endif /* CONFIG_CPU_SH4A */
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/dma.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/dma.h
new file mode 100644
index 0000000..38187d0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/dma.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_CPU_SH4_DMA_H
+#define __ASM_CPU_SH4_DMA_H
+
+#include <linux/sh_intc.h>
+
+/*
+ * SH7750/SH7751/SH7760
+ */
+#define DMTE0_IRQ	evt2irq(0x640)
+#define DMTE4_IRQ	evt2irq(0x780)
+#define DMTE6_IRQ	evt2irq(0x7c0)
+#define DMAE0_IRQ	evt2irq(0x6c0)
+
+#define SH_DMAC_BASE0	0xffa00000
+#define SH_DMAC_BASE1	0xffa00070
+
+#endif /* __ASM_CPU_SH4_DMA_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/fpu.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/fpu.h
new file mode 100644
index 0000000..febef73
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/fpu.h
@@ -0,0 +1,32 @@
+/*
+ * linux/arch/sh/kernel/cpu/sh4/sh4_fpu.h
+ *
+ * Copyright (C) 2006 STMicroelectronics Limited
+ * Author: Carl Shaw <carl.shaw@st.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License Version 2.  See linux/COPYING for more information.
+ *
+ * Definitions for SH4 FPU operations
+ */
+
+#ifndef __CPU_SH4_FPU_H
+#define __CPU_SH4_FPU_H
+
+#define FPSCR_ENABLE_MASK	0x00000f80UL
+
+#define FPSCR_FMOV_DOUBLE	(1<<1)
+
+#define FPSCR_CAUSE_INEXACT	(1<<12)
+#define FPSCR_CAUSE_UNDERFLOW	(1<<13)
+#define FPSCR_CAUSE_OVERFLOW	(1<<14)
+#define FPSCR_CAUSE_DIVZERO	(1<<15)
+#define FPSCR_CAUSE_INVALID	(1<<16)
+#define FPSCR_CAUSE_ERROR 	(1<<17)
+
+#define FPSCR_DBL_PRECISION	(1<<19)
+#define FPSCR_ROUNDING_MODE(x)	((x >> 20) & 3)
+#define FPSCR_RM_NEAREST	(0)
+#define FPSCR_RM_ZERO		(1)
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/freq.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/freq.h
new file mode 100644
index 0000000..1631fc2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/freq.h
@@ -0,0 +1,77 @@
+/*
+ * include/asm-sh/cpu-sh4/freq.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_FREQ_H
+#define __ASM_CPU_SH4_FREQ_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7343) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7366)
+#define FRQCR		        0xa4150000
+#define VCLKCR			0xa4150004
+#define SCLKACR			0xa4150008
+#define SCLKBCR			0xa415000c
+#define IrDACLKCR		0xa4150010
+#define MSTPCR0			0xa4150030
+#define MSTPCR1			0xa4150034
+#define MSTPCR2			0xa4150038
+#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
+#define	FRQCR			0xffc80000
+#define	OSCCR			0xffc80018
+#define	PLLCR			0xffc80024
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define	FRQCR			0xffc80000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define FRQCRA			0xa4150000
+#define FRQCRB			0xa4150004
+#define VCLKCR			0xa4150048
+
+#define FCLKACR			0xa4150008
+#define FCLKBCR			0xa415000c
+#define FRQCR			FRQCRA
+#define SCLKACR			FCLKACR
+#define SCLKBCR			FCLKBCR
+#define FCLKACR			0xa4150008
+#define FCLKBCR			0xa415000c
+#define IrDACLKCR		0xa4150018
+
+#define MSTPCR0			0xa4150030
+#define MSTPCR1			0xa4150034
+#define MSTPCR2			0xa4150038
+
+#elif defined(CONFIG_CPU_SUBTYPE_SH7734)
+#define FRQCR0			0xffc80000
+#define FRQCR2			0xffc80008
+#define FRQMR1			0xffc80014
+#define FRQMR2			0xffc80018
+#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
+#define FRQCR0			0xffc80000
+#define FRQCR1			0xffc80004
+#define FRQMR1			0xffc80014
+#elif defined(CONFIG_CPU_SUBTYPE_SH7786)
+#define FRQCR0			0xffc40000
+#define FRQCR1			0xffc40004
+#define FRQMR1			0xffc40014
+#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
+#define FRQCR0			0xffc00000
+#define FRQCR1			0xffc00004
+#define FRQMR1			0xffc00014
+#else
+#define FRQCR			0xffc00000
+#define FRQCR_PSTBY		0x0200
+#define FRQCR_PLLEN		0x0400
+#define FRQCR_CKOEN		0x0800
+#endif
+#define MIN_DIVISOR_NR		0
+#define MAX_DIVISOR_NR		3
+
+#endif /* __ASM_CPU_SH4_FREQ_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/mmu_context.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/mmu_context.h
new file mode 100644
index 0000000..e46ec70
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/mmu_context.h
@@ -0,0 +1,82 @@
+/*
+ * include/asm-sh/cpu-sh4/mmu_context.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_MMU_CONTEXT_H
+#define __ASM_CPU_SH4_MMU_CONTEXT_H
+
+#define MMU_PTEH	0xFF000000	/* Page table entry register HIGH */
+#define MMU_PTEL	0xFF000004	/* Page table entry register LOW */
+#define MMU_TTB		0xFF000008	/* Translation table base register */
+#define MMU_TEA		0xFF00000C	/* TLB Exception Address */
+#define MMU_PTEA	0xFF000034	/* PTE assistance register */
+#define MMU_PTEAEX	0xFF00007C	/* PTE ASID extension register */
+
+#define MMUCR		0xFF000010	/* MMU Control Register */
+
+#define MMU_TLB_ENTRY_SHIFT	8
+
+#define MMU_ITLB_ADDRESS_ARRAY  0xF2000000
+#define MMU_ITLB_ADDRESS_ARRAY2	0xF2800000
+#define MMU_ITLB_DATA_ARRAY	0xF3000000
+#define MMU_ITLB_DATA_ARRAY2	0xF3800000
+
+#define MMU_UTLB_ADDRESS_ARRAY	0xF6000000
+#define MMU_UTLB_ADDRESS_ARRAY2	0xF6800000
+#define MMU_UTLB_DATA_ARRAY	0xF7000000
+#define MMU_UTLB_DATA_ARRAY2	0xF7800000
+#define MMU_PAGE_ASSOC_BIT	0x80
+
+#ifdef CONFIG_MMU
+#define MMUCR_AT		(1 << 0)
+#else
+#define MMUCR_AT		(0)
+#endif
+
+#define MMUCR_TI		(1 << 2)
+
+#define MMUCR_URB		0x00FC0000
+#define MMUCR_URB_SHIFT		18
+#define MMUCR_URB_NENTRIES	64
+#define MMUCR_URC		0x0000FC00
+#define MMUCR_URC_SHIFT		10
+
+#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40)
+#define MMUCR_SE		(1 << 4)
+#else
+#define MMUCR_SE		(0)
+#endif
+
+#ifdef CONFIG_CPU_HAS_PTEAEX
+#define MMUCR_AEX		(1 << 6)
+#else
+#define MMUCR_AEX		(0)
+#endif
+
+#ifdef CONFIG_X2TLB
+#define MMUCR_ME		(1 << 7)
+#else
+#define MMUCR_ME		(0)
+#endif
+
+#ifdef CONFIG_SH_STORE_QUEUES
+#define MMUCR_SQMD		(1 << 9)
+#else
+#define MMUCR_SQMD		(0)
+#endif
+
+#define MMU_NTLB_ENTRIES	64
+#define MMU_CONTROL_INIT	(MMUCR_AT | MMUCR_TI | MMUCR_SQMD | \
+				 MMUCR_ME | MMUCR_SE | MMUCR_AEX)
+
+#define TRA	0xff000020
+#define EXPEVT	0xff000024
+#define INTEVT	0xff000028
+
+#endif /* __ASM_CPU_SH4_MMU_CONTEXT_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/rtc.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/rtc.h
new file mode 100644
index 0000000..4564756
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/rtc.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CPU_SH4_RTC_H
+#define __ASM_SH_CPU_SH4_RTC_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7723)
+#define rtc_reg_size		sizeof(u16)
+#else
+#define rtc_reg_size		sizeof(u32)
+#endif
+
+#define RTC_BIT_INVERTED	0x40	/* bug on SH7750, SH7750S */
+#define RTC_DEF_CAPABILITIES	RTC_CAP_4_DIGIT_YEAR
+
+#endif /* __ASM_SH_CPU_SH4_RTC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7722.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7722.h
new file mode 100644
index 0000000..2306c79
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7722.h
@@ -0,0 +1,252 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH7722_H__
+#define __ASM_SH7722_H__
+
+/* Boot Mode Pins:
+ *
+ * MD0: CPG - Clock Mode 0->3
+ * MD1: CPG - Clock Mode 0->3
+ * MD2: CPG - Reserved (L: Normal operation)
+ * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
+ * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
+ * MD8: Test Mode
+ */
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* PTA */
+	GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
+	GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
+
+	/* PTB */
+	GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
+	GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
+
+	/* PTC */
+	GPIO_PTC7, GPIO_PTC5, GPIO_PTC4, GPIO_PTC3,
+	GPIO_PTC2, GPIO_PTC0,
+
+	/* PTD */
+	GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
+	GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
+
+	/* PTE */
+	GPIO_PTE7, GPIO_PTE6, GPIO_PTE5, GPIO_PTE4,
+	GPIO_PTE1, GPIO_PTE0,
+
+	/* PTF */
+	GPIO_PTF6, GPIO_PTF5, GPIO_PTF4, GPIO_PTF3,
+	GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
+
+	/* PTG */
+	GPIO_PTG4, GPIO_PTG3, GPIO_PTG2, GPIO_PTG1, GPIO_PTG0,
+
+	/* PTH */
+	GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
+	GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
+
+	/* PTJ */
+	GPIO_PTJ7, GPIO_PTJ6, GPIO_PTJ5, GPIO_PTJ1, GPIO_PTJ0,
+
+	/* PTK */
+	GPIO_PTK6, GPIO_PTK5, GPIO_PTK4, GPIO_PTK3,
+	GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
+
+	/* PTL */
+	GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
+	GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
+
+	/* PTM */
+	GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
+	GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
+
+	/* PTN */
+	GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
+	GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
+
+	/* PTQ */
+	GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
+	GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
+
+	/* PTR */
+	GPIO_PTR4, GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
+
+	/* PTS */
+	GPIO_PTS4, GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
+
+	/* PTT */
+	GPIO_PTT4, GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
+
+	/* PTU */
+	GPIO_PTU4, GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
+
+	/* PTV */
+	GPIO_PTV4, GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
+
+	/* PTW */
+	GPIO_PTW6, GPIO_PTW5, GPIO_PTW4, GPIO_PTW3,
+	GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
+
+	/* PTX */
+	GPIO_PTX6, GPIO_PTX5, GPIO_PTX4, GPIO_PTX3,
+	GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
+
+	/* PTY */
+	GPIO_PTY5, GPIO_PTY4, GPIO_PTY3, GPIO_PTY2,
+	GPIO_PTY1, GPIO_PTY0,
+
+	/* PTZ */
+	GPIO_PTZ5, GPIO_PTZ4, GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1,
+
+	/* SCIF0 */
+	GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD,
+	GPIO_FN_SCIF0_RTS, GPIO_FN_SCIF0_CTS, GPIO_FN_SCIF0_SCK,
+
+	/* SCIF1 */
+	GPIO_FN_SCIF1_TXD, GPIO_FN_SCIF1_RXD,
+	GPIO_FN_SCIF1_RTS, GPIO_FN_SCIF1_CTS, GPIO_FN_SCIF1_SCK,
+
+	/* SCIF2 */
+	GPIO_FN_SCIF2_TXD, GPIO_FN_SCIF2_RXD,
+	GPIO_FN_SCIF2_RTS, GPIO_FN_SCIF2_CTS, GPIO_FN_SCIF2_SCK,
+
+	/* SIO */
+	GPIO_FN_SIOTXD, GPIO_FN_SIORXD,
+	GPIO_FN_SIOD, GPIO_FN_SIOSTRB0, GPIO_FN_SIOSTRB1,
+	GPIO_FN_SIOSCK, GPIO_FN_SIOMCK,
+
+	/* CEU */
+	GPIO_FN_VIO_D15, GPIO_FN_VIO_D14, GPIO_FN_VIO_D13, GPIO_FN_VIO_D12,
+	GPIO_FN_VIO_D11, GPIO_FN_VIO_D10, GPIO_FN_VIO_D9, GPIO_FN_VIO_D8,
+	GPIO_FN_VIO_D7, GPIO_FN_VIO_D6, GPIO_FN_VIO_D5, GPIO_FN_VIO_D4,
+	GPIO_FN_VIO_D3, GPIO_FN_VIO_D2, GPIO_FN_VIO_D1, GPIO_FN_VIO_D0,
+	GPIO_FN_VIO_FLD, GPIO_FN_VIO_CKO, GPIO_FN_VIO_STEX, GPIO_FN_VIO_STEM,
+	GPIO_FN_VIO_VD, GPIO_FN_VIO_HD, GPIO_FN_VIO_CLK,
+	GPIO_FN_VIO_VD2, GPIO_FN_VIO_HD2, GPIO_FN_VIO_CLK2,
+
+	/* LCDC */
+	GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
+	GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
+	GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
+	GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9, GPIO_FN_LCDD8,
+	GPIO_FN_LCDD7, GPIO_FN_LCDD6, GPIO_FN_LCDD5, GPIO_FN_LCDD4,
+	GPIO_FN_LCDD3, GPIO_FN_LCDD2, GPIO_FN_LCDD1, GPIO_FN_LCDD0,
+	GPIO_FN_LCDLCLK,
+	/* Main LCD */
+	GPIO_FN_LCDDON, GPIO_FN_LCDVCPWC, GPIO_FN_LCDVEPWC, GPIO_FN_LCDVSYN,
+	/* Main LCD - RGB Mode */
+	GPIO_FN_LCDDCK, GPIO_FN_LCDHSYN, GPIO_FN_LCDDISP,
+	/* Main LCD - SYS Mode */
+	GPIO_FN_LCDRS, GPIO_FN_LCDCS, GPIO_FN_LCDWR, GPIO_FN_LCDRD,
+	/* Sub LCD - SYS Mode */
+	GPIO_FN_LCDDON2, GPIO_FN_LCDVCPWC2, GPIO_FN_LCDVEPWC2,
+	GPIO_FN_LCDVSYN2, GPIO_FN_LCDCS2,
+
+	/* BSC */
+	GPIO_FN_IOIS16, GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
+	GPIO_FN_BS, GPIO_FN_CS6B_CE1B, GPIO_FN_WAIT, GPIO_FN_CS6A_CE2B,
+
+	/* SBSC */
+	GPIO_FN_HPD63, GPIO_FN_HPD62, GPIO_FN_HPD61, GPIO_FN_HPD60,
+	GPIO_FN_HPD59, GPIO_FN_HPD58, GPIO_FN_HPD57, GPIO_FN_HPD56,
+	GPIO_FN_HPD55, GPIO_FN_HPD54, GPIO_FN_HPD53, GPIO_FN_HPD52,
+	GPIO_FN_HPD51, GPIO_FN_HPD50, GPIO_FN_HPD49, GPIO_FN_HPD48,
+	GPIO_FN_HPDQM7, GPIO_FN_HPDQM6, GPIO_FN_HPDQM5, GPIO_FN_HPDQM4,
+
+	/* IRQ */
+	GPIO_FN_IRQ0, GPIO_FN_IRQ1, GPIO_FN_IRQ2, GPIO_FN_IRQ3,
+	GPIO_FN_IRQ4, GPIO_FN_IRQ5, GPIO_FN_IRQ6, GPIO_FN_IRQ7,
+
+	/* SDHI */
+	GPIO_FN_SDHICD, GPIO_FN_SDHIWP, GPIO_FN_SDHID3, GPIO_FN_SDHID2,
+	GPIO_FN_SDHID1, GPIO_FN_SDHID0, GPIO_FN_SDHICMD, GPIO_FN_SDHICLK,
+
+	/* SIU - Port A */
+	GPIO_FN_SIUAOLR, GPIO_FN_SIUAOBT, GPIO_FN_SIUAISLD, GPIO_FN_SIUAILR,
+	GPIO_FN_SIUAIBT, GPIO_FN_SIUAOSLD, GPIO_FN_SIUMCKA, GPIO_FN_SIUFCKA,
+
+	/* SIU - Port B */
+	GPIO_FN_SIUBOLR, GPIO_FN_SIUBOBT, GPIO_FN_SIUBISLD, GPIO_FN_SIUBILR,
+	GPIO_FN_SIUBIBT, GPIO_FN_SIUBOSLD, GPIO_FN_SIUMCKB, GPIO_FN_SIUFCKB,
+
+	/* AUD */
+	GPIO_FN_AUDSYNC, GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1,
+	GPIO_FN_AUDATA0,
+
+	/* DMAC */
+	GPIO_FN_DACK, GPIO_FN_DREQ0,
+
+	/* VOU */
+	GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_HSYNC, GPIO_FN_DV_VSYNC,
+	GPIO_FN_DV_D15, GPIO_FN_DV_D14, GPIO_FN_DV_D13, GPIO_FN_DV_D12,
+	GPIO_FN_DV_D11, GPIO_FN_DV_D10, GPIO_FN_DV_D9, GPIO_FN_DV_D8,
+	GPIO_FN_DV_D7, GPIO_FN_DV_D6, GPIO_FN_DV_D5, GPIO_FN_DV_D4,
+	GPIO_FN_DV_D3, GPIO_FN_DV_D2, GPIO_FN_DV_D1, GPIO_FN_DV_D0,
+
+	/* CPG */
+	GPIO_FN_STATUS0, GPIO_FN_PDSTATUS,
+
+	/* SIOF0 */
+	GPIO_FN_SIOF0_MCK, GPIO_FN_SIOF0_SCK,
+	GPIO_FN_SIOF0_SYNC, GPIO_FN_SIOF0_SS1, GPIO_FN_SIOF0_SS2,
+	GPIO_FN_SIOF0_TXD, GPIO_FN_SIOF0_RXD,
+
+	/* SIOF1 */
+	GPIO_FN_SIOF1_MCK, GPIO_FN_SIOF1_SCK,
+	GPIO_FN_SIOF1_SYNC, GPIO_FN_SIOF1_SS1, GPIO_FN_SIOF1_SS2,
+	GPIO_FN_SIOF1_TXD, GPIO_FN_SIOF1_RXD,
+
+	/* SIM */
+	GPIO_FN_SIM_D, GPIO_FN_SIM_CLK, GPIO_FN_SIM_RST,
+
+	/* TSIF */
+	GPIO_FN_TS_SDAT, GPIO_FN_TS_SCK, GPIO_FN_TS_SDEN, GPIO_FN_TS_SPSYNC,
+
+	/* IRDA */
+	GPIO_FN_IRDA_IN, GPIO_FN_IRDA_OUT,
+
+	/* TPU */
+	GPIO_FN_TPUTO,
+
+	/* FLCTL */
+	GPIO_FN_FCE, GPIO_FN_NAF7, GPIO_FN_NAF6, GPIO_FN_NAF5, GPIO_FN_NAF4,
+	GPIO_FN_NAF3, GPIO_FN_NAF2, GPIO_FN_NAF1, GPIO_FN_NAF0, GPIO_FN_FCDE,
+	GPIO_FN_FOE, GPIO_FN_FSC, GPIO_FN_FWE, GPIO_FN_FRB,
+
+	/* KEYSC */
+	GPIO_FN_KEYIN0, GPIO_FN_KEYIN1, GPIO_FN_KEYIN2, GPIO_FN_KEYIN3,
+	GPIO_FN_KEYIN4, GPIO_FN_KEYOUT0, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT2,
+	GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYOUT5_IN5,
+};
+
+enum {
+	HWBLK_URAM, HWBLK_XYMEM,
+	HWBLK_TMU, HWBLK_CMT, HWBLK_RWDT, HWBLK_FLCTL,
+	HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2, HWBLK_IIC, HWBLK_RTC,
+	HWBLK_SDHI, HWBLK_KEYSC,
+	HWBLK_USBF, HWBLK_2DG, HWBLK_SIU, HWBLK_VOU,
+	HWBLK_JPU, HWBLK_BEU, HWBLK_CEU, HWBLK_VEU, HWBLK_VPU,
+	HWBLK_LCDC,
+	HWBLK_NR,
+};
+
+enum {
+	SHDMA_SLAVE_INVALID,
+	SHDMA_SLAVE_SCIF0_TX,
+	SHDMA_SLAVE_SCIF0_RX,
+	SHDMA_SLAVE_SCIF1_TX,
+	SHDMA_SLAVE_SCIF1_RX,
+	SHDMA_SLAVE_SCIF2_TX,
+	SHDMA_SLAVE_SCIF2_RX,
+	SHDMA_SLAVE_SIUA_TX,
+	SHDMA_SLAVE_SIUA_RX,
+	SHDMA_SLAVE_SIUB_TX,
+	SHDMA_SLAVE_SIUB_RX,
+	SHDMA_SLAVE_SDHI0_TX,
+	SHDMA_SLAVE_SDHI0_RX,
+};
+
+#endif /* __ASM_SH7722_H__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7723.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7723.h
new file mode 100644
index 0000000..41f6753
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7723.h
@@ -0,0 +1,285 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH7723_H__
+#define __ASM_SH7723_H__
+
+/* Boot Mode Pins:
+ *
+ * MD0: CPG - Clock Mode 0->3
+ * MD1: CPG - Clock Mode 0->3
+ * MD2: CPG - Reserved (L: Normal operation)
+ * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
+ * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
+ * MD8: Test Mode
+ */
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* PTA */
+	GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
+	GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
+
+	/* PTB */
+	GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
+	GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
+
+	/* PTC */
+	GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
+	GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
+
+	/* PTD */
+	GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
+	GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
+
+	/* PTE */
+	GPIO_PTE5, GPIO_PTE4, GPIO_PTE3, GPIO_PTE2,
+	GPIO_PTE1, GPIO_PTE0,
+
+	/* PTF */
+	GPIO_PTF7, GPIO_PTF6, GPIO_PTF5, GPIO_PTF4,
+	GPIO_PTF3, GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
+
+	/* PTG */
+	GPIO_PTG5, GPIO_PTG4, GPIO_PTG3, GPIO_PTG2,
+	GPIO_PTG1, GPIO_PTG0,
+
+	/* PTH */
+	GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
+	GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
+
+	/* PTJ */
+	GPIO_PTJ7, GPIO_PTJ5, GPIO_PTJ3, GPIO_PTJ2,
+	GPIO_PTJ1, GPIO_PTJ0,
+
+	/* PTK */
+	GPIO_PTK7, GPIO_PTK6, GPIO_PTK5, GPIO_PTK4,
+	GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
+
+	/* PTL */
+	GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
+	GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
+
+	/* PTM */
+	GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
+	GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
+
+	/* PTN */
+	GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
+	GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
+
+	/* PTQ */
+	GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
+
+	/* PTR */
+	GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
+	GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
+
+	/* PTS */
+	GPIO_PTS7, GPIO_PTS6, GPIO_PTS5, GPIO_PTS4,
+	GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
+
+	/* PTT */
+	GPIO_PTT5, GPIO_PTT4, GPIO_PTT3, GPIO_PTT2,
+	GPIO_PTT1, GPIO_PTT0,
+
+	/* PTU */
+	GPIO_PTU5, GPIO_PTU4, GPIO_PTU3, GPIO_PTU2,
+	GPIO_PTU1, GPIO_PTU0,
+
+	/* PTV */
+	GPIO_PTV7, GPIO_PTV6, GPIO_PTV5, GPIO_PTV4,
+	GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
+
+	/* PTW */
+	GPIO_PTW7, GPIO_PTW6, GPIO_PTW5, GPIO_PTW4,
+	GPIO_PTW3, GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
+
+	/* PTX */
+	GPIO_PTX7, GPIO_PTX6, GPIO_PTX5, GPIO_PTX4,
+	GPIO_PTX3, GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
+
+	/* PTY */
+	GPIO_PTY7, GPIO_PTY6, GPIO_PTY5, GPIO_PTY4,
+	GPIO_PTY3, GPIO_PTY2, GPIO_PTY1, GPIO_PTY0,
+
+	/* PTZ */
+	GPIO_PTZ7, GPIO_PTZ6, GPIO_PTZ5, GPIO_PTZ4,
+	GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1, GPIO_PTZ0,
+
+	/* SCIF0 (SCIF: 3 pin PTT/PTU) */
+	GPIO_FN_SCIF0_PTT_TXD, GPIO_FN_SCIF0_PTT_RXD, GPIO_FN_SCIF0_PTT_SCK,
+	GPIO_FN_SCIF0_PTU_TXD, GPIO_FN_SCIF0_PTU_RXD, GPIO_FN_SCIF0_PTU_SCK,
+
+	/* SCIF1 (SCIF: 3 pin PTS/PTV) */
+	GPIO_FN_SCIF1_PTS_TXD, GPIO_FN_SCIF1_PTS_RXD, GPIO_FN_SCIF1_PTS_SCK,
+	GPIO_FN_SCIF1_PTV_TXD, GPIO_FN_SCIF1_PTV_RXD, GPIO_FN_SCIF1_PTV_SCK,
+
+	/* SCIF2 (SCIF: 3 pin PTT/PTU) */
+	GPIO_FN_SCIF2_PTT_TXD, GPIO_FN_SCIF2_PTT_RXD, GPIO_FN_SCIF2_PTT_SCK,
+	GPIO_FN_SCIF2_PTU_TXD, GPIO_FN_SCIF2_PTU_RXD, GPIO_FN_SCIF2_PTU_SCK,
+
+	/* SCIF3 (SCIFA: 5 pin PTS/PTV) */
+	GPIO_FN_SCIF3_PTS_TXD, GPIO_FN_SCIF3_PTS_RXD, GPIO_FN_SCIF3_PTS_SCK,
+	GPIO_FN_SCIF3_PTS_RTS, GPIO_FN_SCIF3_PTS_CTS,
+	GPIO_FN_SCIF3_PTV_TXD, GPIO_FN_SCIF3_PTV_RXD, GPIO_FN_SCIF3_PTV_SCK,
+	GPIO_FN_SCIF3_PTV_RTS, GPIO_FN_SCIF3_PTV_CTS,
+
+	/* SCIF4 (SCIFA: 3 pin PTE/PTN) */
+	GPIO_FN_SCIF4_PTE_TXD, GPIO_FN_SCIF4_PTE_RXD, GPIO_FN_SCIF4_PTE_SCK,
+	GPIO_FN_SCIF4_PTN_TXD, GPIO_FN_SCIF4_PTN_RXD, GPIO_FN_SCIF4_PTN_SCK,
+
+	/* SCIF5 (SCIFA: 3 pin PTE/PTN) */
+	GPIO_FN_SCIF5_PTE_TXD, GPIO_FN_SCIF5_PTE_RXD, GPIO_FN_SCIF5_PTE_SCK,
+	GPIO_FN_SCIF5_PTN_TXD, GPIO_FN_SCIF5_PTN_RXD, GPIO_FN_SCIF5_PTN_SCK,
+
+	/* CEU */
+	GPIO_FN_VIO_D15, GPIO_FN_VIO_D14, GPIO_FN_VIO_D13, GPIO_FN_VIO_D12,
+	GPIO_FN_VIO_D11, GPIO_FN_VIO_D10, GPIO_FN_VIO_D9, GPIO_FN_VIO_D8,
+	GPIO_FN_VIO_D7, GPIO_FN_VIO_D6, GPIO_FN_VIO_D5, GPIO_FN_VIO_D4,
+	GPIO_FN_VIO_D3, GPIO_FN_VIO_D2, GPIO_FN_VIO_D1, GPIO_FN_VIO_D0,
+	GPIO_FN_VIO_FLD, GPIO_FN_VIO_CKO,
+	GPIO_FN_VIO_VD1, GPIO_FN_VIO_HD1, GPIO_FN_VIO_CLK1,
+	GPIO_FN_VIO_VD2, GPIO_FN_VIO_HD2, GPIO_FN_VIO_CLK2,
+
+	/* LCDC */
+	GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
+	GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
+	GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
+	GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9, GPIO_FN_LCDD8,
+	GPIO_FN_LCDD7, GPIO_FN_LCDD6, GPIO_FN_LCDD5, GPIO_FN_LCDD4,
+	GPIO_FN_LCDD3, GPIO_FN_LCDD2, GPIO_FN_LCDD1, GPIO_FN_LCDD0,
+	GPIO_FN_LCDLCLK_PTR, GPIO_FN_LCDLCLK_PTW,
+	/* Main LCD */
+	GPIO_FN_LCDDON, GPIO_FN_LCDVCPWC, GPIO_FN_LCDVEPWC, GPIO_FN_LCDVSYN,
+	/* Main LCD - RGB Mode */
+	GPIO_FN_LCDDCK, GPIO_FN_LCDHSYN, GPIO_FN_LCDDISP,
+	/* Main LCD - SYS Mode */
+	GPIO_FN_LCDRS, GPIO_FN_LCDCS, GPIO_FN_LCDWR, GPIO_FN_LCDRD,
+
+	/* IRQ */
+	GPIO_FN_IRQ0, GPIO_FN_IRQ1, GPIO_FN_IRQ2, GPIO_FN_IRQ3,
+	GPIO_FN_IRQ4, GPIO_FN_IRQ5, GPIO_FN_IRQ6, GPIO_FN_IRQ7,
+
+	/* AUD */
+	GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
+	GPIO_FN_AUDCK, GPIO_FN_AUDSYNC,
+
+	/* SDHI0 (PTD) */
+	GPIO_FN_SDHI0CD_PTD, GPIO_FN_SDHI0WP_PTD,
+	GPIO_FN_SDHI0D3_PTD, GPIO_FN_SDHI0D2_PTD,
+	GPIO_FN_SDHI0D1_PTD, GPIO_FN_SDHI0D0_PTD,
+	GPIO_FN_SDHI0CMD_PTD, GPIO_FN_SDHI0CLK_PTD,
+
+	/* SDHI0 (PTS) */
+	GPIO_FN_SDHI0CD_PTS, GPIO_FN_SDHI0WP_PTS,
+	GPIO_FN_SDHI0D3_PTS, GPIO_FN_SDHI0D2_PTS,
+	GPIO_FN_SDHI0D1_PTS, GPIO_FN_SDHI0D0_PTS,
+	GPIO_FN_SDHI0CMD_PTS, GPIO_FN_SDHI0CLK_PTS,
+
+	/* SDHI1 */
+	GPIO_FN_SDHI1CD, GPIO_FN_SDHI1WP, GPIO_FN_SDHI1D3, GPIO_FN_SDHI1D2,
+	GPIO_FN_SDHI1D1, GPIO_FN_SDHI1D0, GPIO_FN_SDHI1CMD, GPIO_FN_SDHI1CLK,
+
+	/* SIUA */
+	GPIO_FN_SIUAFCK, GPIO_FN_SIUAILR, GPIO_FN_SIUAIBT, GPIO_FN_SIUAISLD,
+	GPIO_FN_SIUAOLR, GPIO_FN_SIUAOBT, GPIO_FN_SIUAOSLD, GPIO_FN_SIUAMCK,
+	GPIO_FN_SIUAISPD, GPIO_FN_SIUAOSPD,
+
+	/* SIUB */
+	GPIO_FN_SIUBFCK, GPIO_FN_SIUBILR, GPIO_FN_SIUBIBT, GPIO_FN_SIUBISLD,
+	GPIO_FN_SIUBOLR, GPIO_FN_SIUBOBT, GPIO_FN_SIUBOSLD, GPIO_FN_SIUBMCK,
+
+	/* IRDA */
+	GPIO_FN_IRDA_IN, GPIO_FN_IRDA_OUT,
+
+	/* VOU */
+	GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_HSYNC, GPIO_FN_DV_VSYNC,
+	GPIO_FN_DV_D15, GPIO_FN_DV_D14, GPIO_FN_DV_D13, GPIO_FN_DV_D12,
+	GPIO_FN_DV_D11, GPIO_FN_DV_D10, GPIO_FN_DV_D9, GPIO_FN_DV_D8,
+	GPIO_FN_DV_D7, GPIO_FN_DV_D6, GPIO_FN_DV_D5, GPIO_FN_DV_D4,
+	GPIO_FN_DV_D3, GPIO_FN_DV_D2, GPIO_FN_DV_D1, GPIO_FN_DV_D0,
+
+	/* KEYSC */
+	GPIO_FN_KEYIN0, GPIO_FN_KEYIN1, GPIO_FN_KEYIN2, GPIO_FN_KEYIN3,
+	GPIO_FN_KEYIN4, GPIO_FN_KEYOUT0, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT2,
+	GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYOUT5_IN5,
+
+	/* MSIOF0 (PTF) */
+	GPIO_FN_MSIOF0_PTF_TXD, GPIO_FN_MSIOF0_PTF_RXD, GPIO_FN_MSIOF0_PTF_MCK,
+	GPIO_FN_MSIOF0_PTF_TSYNC, GPIO_FN_MSIOF0_PTF_TSCK,
+	GPIO_FN_MSIOF0_PTF_RSYNC, GPIO_FN_MSIOF0_PTF_RSCK,
+	GPIO_FN_MSIOF0_PTF_SS1, GPIO_FN_MSIOF0_PTF_SS2,
+
+	/* MSIOF0 (PTT+PTX) */
+	GPIO_FN_MSIOF0_PTT_TXD, GPIO_FN_MSIOF0_PTT_RXD, GPIO_FN_MSIOF0_PTX_MCK,
+	GPIO_FN_MSIOF0_PTT_TSYNC, GPIO_FN_MSIOF0_PTT_TSCK,
+	GPIO_FN_MSIOF0_PTT_RSYNC, GPIO_FN_MSIOF0_PTT_RSCK,
+	GPIO_FN_MSIOF0_PTT_SS1, GPIO_FN_MSIOF0_PTT_SS2,
+
+	/* MSIOF1 */
+	GPIO_FN_MSIOF1_TXD, GPIO_FN_MSIOF1_RXD, GPIO_FN_MSIOF1_MCK,
+	GPIO_FN_MSIOF1_TSYNC, GPIO_FN_MSIOF1_TSCK,
+	GPIO_FN_MSIOF1_RSYNC, GPIO_FN_MSIOF1_RSCK,
+	GPIO_FN_MSIOF1_SS1, GPIO_FN_MSIOF1_SS2,
+
+	/* TSIF */
+	GPIO_FN_TS0_SDAT, GPIO_FN_TS0_SCK, GPIO_FN_TS0_SDEN, GPIO_FN_TS0_SPSYNC,
+
+	/* FLCTL */
+	GPIO_FN_FCE, GPIO_FN_NAF7, GPIO_FN_NAF6, GPIO_FN_NAF5, GPIO_FN_NAF4,
+	GPIO_FN_NAF3, GPIO_FN_NAF2, GPIO_FN_NAF1, GPIO_FN_NAF0, GPIO_FN_FCDE,
+	GPIO_FN_FOE, GPIO_FN_FSC, GPIO_FN_FWE, GPIO_FN_FRB,
+
+	/* DMAC */
+	GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DACK0, GPIO_FN_DREQ0,
+
+	/* ADC */
+	GPIO_FN_AN3, GPIO_FN_AN2, GPIO_FN_AN1, GPIO_FN_AN0, GPIO_FN_ADTRG,
+
+	/* CPG */
+	GPIO_FN_STATUS0, GPIO_FN_PDSTATUS,
+
+	/* TPU */
+	GPIO_FN_TPUTO3, GPIO_FN_TPUTO2, GPIO_FN_TPUTO1, GPIO_FN_TPUTO0,
+
+	/* BSC */
+	GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
+	GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
+	GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
+	GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
+	GPIO_FN_IOIS16, GPIO_FN_WAIT, GPIO_FN_BS,
+	GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
+	GPIO_FN_CS6B_CE1B, GPIO_FN_CS6A_CE2B,
+	GPIO_FN_CS5B_CE1A, GPIO_FN_CS5A_CE2A,
+	GPIO_FN_WE3_ICIOWR, GPIO_FN_WE2_ICIORD,
+
+	/* ATAPI */
+	GPIO_FN_IDED15, GPIO_FN_IDED14, GPIO_FN_IDED13, GPIO_FN_IDED12,
+	GPIO_FN_IDED11, GPIO_FN_IDED10, GPIO_FN_IDED9, GPIO_FN_IDED8,
+	GPIO_FN_IDED7, GPIO_FN_IDED6, GPIO_FN_IDED5, GPIO_FN_IDED4,
+	GPIO_FN_IDED3, GPIO_FN_IDED2, GPIO_FN_IDED1, GPIO_FN_IDED0,
+	GPIO_FN_DIRECTION, GPIO_FN_EXBUF_ENB, GPIO_FN_IDERST, GPIO_FN_IODACK,
+	GPIO_FN_IODREQ, GPIO_FN_IDEIORDY, GPIO_FN_IDEINT, GPIO_FN_IDEIOWR,
+	GPIO_FN_IDEIORD, GPIO_FN_IDECS1, GPIO_FN_IDECS0, GPIO_FN_IDEA2,
+	GPIO_FN_IDEA1, GPIO_FN_IDEA0,
+};
+
+enum {
+	HWBLK_TLB, HWBLK_IC, HWBLK_OC, HWBLK_L2C, HWBLK_ILMEM, HWBLK_FPU,
+	HWBLK_INTC, HWBLK_DMAC0, HWBLK_SHYWAY,
+	HWBLK_HUDI, HWBLK_UBC,
+	HWBLK_TMU0, HWBLK_CMT, HWBLK_RWDT, HWBLK_DMAC1, HWBLK_TMU1,
+	HWBLK_FLCTL,
+	HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2,
+	HWBLK_SCIF3, HWBLK_SCIF4, HWBLK_SCIF5,
+	HWBLK_MSIOF0, HWBLK_MSIOF1, HWBLK_MERAM, HWBLK_IIC, HWBLK_RTC,
+	HWBLK_ATAPI, HWBLK_ADC, HWBLK_TPU, HWBLK_IRDA, HWBLK_TSIF, HWBLK_ICB,
+	HWBLK_SDHI0, HWBLK_SDHI1, HWBLK_KEYSC, HWBLK_USB,
+	HWBLK_2DG, HWBLK_SIU, HWBLK_VEU2H1, HWBLK_VOU, HWBLK_BEU, HWBLK_CEU,
+	HWBLK_VEU2H0, HWBLK_VPU, HWBLK_LCDC,
+	HWBLK_NR,
+};
+
+#endif /* __ASM_SH7723_H__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7724.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7724.h
new file mode 100644
index 0000000..b3a7caf
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7724.h
@@ -0,0 +1,319 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH7724_H__
+#define __ASM_SH7724_H__
+
+/* Boot Mode Pins:
+ *
+ * MD0: CPG - Clock Mode 0->7
+ * MD1: CPG - Clock Mode 0->7
+ * MD2: CPG - Clock Mode 0->7
+ * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
+ * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
+ * MD8: Test Mode
+ * BOOT: FBR - Boot Mode (L: MMCIF, H: Area0)
+ */
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* PTA */
+	GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
+	GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
+
+	/* PTB */
+	GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
+	GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
+
+	/* PTC */
+	GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
+	GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
+
+	/* PTD */
+	GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
+	GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
+
+	/* PTE */
+	GPIO_PTE7, GPIO_PTE6, GPIO_PTE5, GPIO_PTE4,
+	GPIO_PTE3, GPIO_PTE2, GPIO_PTE1, GPIO_PTE0,
+
+	/* PTF */
+	GPIO_PTF7, GPIO_PTF6, GPIO_PTF5, GPIO_PTF4,
+	GPIO_PTF3, GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
+
+	/* PTG */
+			      GPIO_PTG5, GPIO_PTG4,
+	GPIO_PTG3, GPIO_PTG2, GPIO_PTG1, GPIO_PTG0,
+
+	/* PTH */
+	GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
+	GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
+
+	/* PTJ */
+	GPIO_PTJ7, GPIO_PTJ6, GPIO_PTJ5,
+	GPIO_PTJ3, GPIO_PTJ2, GPIO_PTJ1, GPIO_PTJ0,
+
+	/* PTK */
+	GPIO_PTK7, GPIO_PTK6, GPIO_PTK5, GPIO_PTK4,
+	GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
+
+	/* PTL */
+	GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
+	GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
+
+	/* PTM */
+	GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
+	GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
+
+	/* PTN */
+	GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
+	GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
+
+	/* PTQ */
+	GPIO_PTQ7, GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
+	GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
+
+	/* PTR */
+	GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
+	GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
+
+	/* PTS */
+		   GPIO_PTS6, GPIO_PTS5, GPIO_PTS4,
+	GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
+
+	/* PTT */
+	GPIO_PTT7, GPIO_PTT6, GPIO_PTT5, GPIO_PTT4,
+	GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
+
+	/* PTU */
+	GPIO_PTU7, GPIO_PTU6, GPIO_PTU5, GPIO_PTU4,
+	GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
+
+	/* PTV */
+	GPIO_PTV7, GPIO_PTV6, GPIO_PTV5, GPIO_PTV4,
+	GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
+
+	/* PTW */
+	GPIO_PTW7, GPIO_PTW6, GPIO_PTW5, GPIO_PTW4,
+	GPIO_PTW3, GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
+
+	/* PTX */
+	GPIO_PTX7, GPIO_PTX6, GPIO_PTX5, GPIO_PTX4,
+	GPIO_PTX3, GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
+
+	/* PTY */
+	GPIO_PTY7, GPIO_PTY6, GPIO_PTY5, GPIO_PTY4,
+	GPIO_PTY3, GPIO_PTY2, GPIO_PTY1, GPIO_PTY0,
+
+	/* PTZ */
+	GPIO_PTZ7, GPIO_PTZ6, GPIO_PTZ5, GPIO_PTZ4,
+	GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1, GPIO_PTZ0,
+
+	/* BSC (PTA/PTB/PTJ/PTQ/PTR/PTT) */
+	GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
+	GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
+	GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
+	GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
+	GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
+	GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9,  GPIO_FN_D8,
+	GPIO_FN_D7,  GPIO_FN_D6,  GPIO_FN_D5,  GPIO_FN_D4,
+	GPIO_FN_D3,  GPIO_FN_D2,  GPIO_FN_D1,  GPIO_FN_D0,
+	GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
+	GPIO_FN_CS6B_CE1B,  GPIO_FN_CS6A_CE2B,
+	GPIO_FN_CS5B_CE1A,  GPIO_FN_CS5A_CE2A,
+	GPIO_FN_WE3_ICIOWR, GPIO_FN_WE2_ICIORD,
+	GPIO_FN_IOIS16,     GPIO_FN_WAIT,
+	GPIO_FN_BS,
+
+	/* KEYSC (PTA/PTB)*/
+	GPIO_FN_KEYOUT5_IN5, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYIN4,
+	GPIO_FN_KEYIN3,  GPIO_FN_KEYIN2,  GPIO_FN_KEYIN1,  GPIO_FN_KEYIN0,
+	GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT2, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT0,
+
+	/* ATAPI (PTA/PTB/PTK/PTR/PTS/PTW) */
+	GPIO_FN_IDED15, GPIO_FN_IDED14, GPIO_FN_IDED13, GPIO_FN_IDED12,
+	GPIO_FN_IDED11, GPIO_FN_IDED10, GPIO_FN_IDED9,  GPIO_FN_IDED8,
+	GPIO_FN_IDED7,  GPIO_FN_IDED6,  GPIO_FN_IDED5,  GPIO_FN_IDED4,
+	GPIO_FN_IDED3,  GPIO_FN_IDED2,  GPIO_FN_IDED1,  GPIO_FN_IDED0,
+	GPIO_FN_IDEA2,     GPIO_FN_IDEA1,     GPIO_FN_IDEA0,  GPIO_FN_IDEIOWR,
+	GPIO_FN_IODREQ,    GPIO_FN_IDECS0,    GPIO_FN_IDECS1, GPIO_FN_IDEIORD,
+	GPIO_FN_DIRECTION, GPIO_FN_EXBUF_ENB, GPIO_FN_IDERST, GPIO_FN_IODACK,
+	GPIO_FN_IDEINT,    GPIO_FN_IDEIORDY,
+
+	/* TPU (PTB/PTR/PTS) */
+	GPIO_FN_TPUTO3, GPIO_FN_TPUTO2, GPIO_FN_TPUTO1, GPIO_FN_TPUTO0,
+	GPIO_FN_TPUTI3, GPIO_FN_TPUTI2,
+
+	/* LCDC (PTC/PTD/PTE/PTF/PTM/PTR) */
+	GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
+	GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
+	GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
+	GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9,  GPIO_FN_LCDD8,
+	GPIO_FN_LCDD7,  GPIO_FN_LCDD6,  GPIO_FN_LCDD5,  GPIO_FN_LCDD4,
+	GPIO_FN_LCDD3,  GPIO_FN_LCDD2,  GPIO_FN_LCDD1,  GPIO_FN_LCDD0,
+	GPIO_FN_LCDVSYN,  GPIO_FN_LCDDISP,  GPIO_FN_LCDRS,  GPIO_FN_LCDHSYN,
+	GPIO_FN_LCDCS,    GPIO_FN_LCDDON,   GPIO_FN_LCDDCK, GPIO_FN_LCDWR,
+	GPIO_FN_LCDVEPWC, GPIO_FN_LCDVCPWC, GPIO_FN_LCDRD,  GPIO_FN_LCDLCLK,
+
+	/* SCIF0 (PTF/PTM) */
+	GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD, GPIO_FN_SCIF0_SCK,
+
+	/* SCIF1 (PTL) */
+	GPIO_FN_SCIF1_SCK, GPIO_FN_SCIF1_RXD, GPIO_FN_SCIF1_TXD,
+
+	/* SCIF2 (PTE/PTF/PTN) with LCDC, VOU */
+	GPIO_FN_SCIF2_L_TXD, GPIO_FN_SCIF2_L_SCK, GPIO_FN_SCIF2_L_RXD,
+	GPIO_FN_SCIF2_V_TXD, GPIO_FN_SCIF2_V_SCK, GPIO_FN_SCIF2_V_RXD,
+
+	/* SCIF3 (PTL/PTN/PTZ) with VOU, IRQ */
+	GPIO_FN_SCIF3_V_SCK, GPIO_FN_SCIF3_V_RXD, GPIO_FN_SCIF3_V_TXD,
+	GPIO_FN_SCIF3_V_CTS, GPIO_FN_SCIF3_V_RTS,
+	GPIO_FN_SCIF3_I_SCK, GPIO_FN_SCIF3_I_RXD, GPIO_FN_SCIF3_I_TXD,
+	GPIO_FN_SCIF3_I_CTS, GPIO_FN_SCIF3_I_RTS,
+
+	/* SCIF4 (PTE) */
+	GPIO_FN_SCIF4_SCK, GPIO_FN_SCIF4_RXD, GPIO_FN_SCIF4_TXD,
+
+	/* SCIF5 (PTS) */
+	GPIO_FN_SCIF5_SCK, GPIO_FN_SCIF5_RXD, GPIO_FN_SCIF5_TXD,
+
+	/* FSI (PTE/PTU/PTV) */
+	GPIO_FN_FSIMCKB,   GPIO_FN_FSIMCKA,    GPIO_FN_FSIOASD,
+	GPIO_FN_FSIIABCK,  GPIO_FN_FSIIALRCK,  GPIO_FN_FSIOABCK,
+	GPIO_FN_FSIOALRCK, GPIO_FN_CLKAUDIOAO, GPIO_FN_FSIIBSD,
+	GPIO_FN_FSIOBSD,   GPIO_FN_FSIIBBCK,   GPIO_FN_FSIIBLRCK,
+	GPIO_FN_FSIOBBCK,  GPIO_FN_FSIOBLRCK,  GPIO_FN_CLKAUDIOBO,
+	GPIO_FN_FSIIASD,
+
+	/* AUD (PTG) */
+	GPIO_FN_AUDCK,   GPIO_FN_AUDSYNC, GPIO_FN_AUDATA3,
+	GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
+
+	/* VIO (PTS) (common?) */
+	GPIO_FN_VIO_CKO,
+
+	/* VIO0 (PTH/PTK) */
+	GPIO_FN_VIO0_D15, GPIO_FN_VIO0_D14, GPIO_FN_VIO0_D13, GPIO_FN_VIO0_D12,
+	GPIO_FN_VIO0_D11, GPIO_FN_VIO0_D10, GPIO_FN_VIO0_D9,  GPIO_FN_VIO0_D8,
+	GPIO_FN_VIO0_D7,  GPIO_FN_VIO0_D6,  GPIO_FN_VIO0_D5,  GPIO_FN_VIO0_D4,
+	GPIO_FN_VIO0_D3,  GPIO_FN_VIO0_D2,  GPIO_FN_VIO0_D1,  GPIO_FN_VIO0_D0,
+	GPIO_FN_VIO0_VD,  GPIO_FN_VIO0_CLK,
+	GPIO_FN_VIO0_FLD, GPIO_FN_VIO0_HD,
+
+	/* VIO1 (PTK/PTS) */
+	GPIO_FN_VIO1_D7,  GPIO_FN_VIO1_D6, GPIO_FN_VIO1_D5, GPIO_FN_VIO1_D4,
+	GPIO_FN_VIO1_D3,  GPIO_FN_VIO1_D2, GPIO_FN_VIO1_D1, GPIO_FN_VIO1_D0,
+	GPIO_FN_VIO1_FLD, GPIO_FN_VIO1_HD, GPIO_FN_VIO1_VD, GPIO_FN_VIO1_CLK,
+
+	/* Eth  (PTL/PTN/PTX) */
+	GPIO_FN_RMII_RXD0,    GPIO_FN_RMII_RXD1,
+	GPIO_FN_RMII_TXD0,    GPIO_FN_RMII_TXD1,
+	GPIO_FN_RMII_REF_CLK, GPIO_FN_RMII_TX_EN,
+	GPIO_FN_RMII_RX_ER,   GPIO_FN_RMII_CRS_DV,
+	GPIO_FN_LNKSTA,       GPIO_FN_MDIO,
+	GPIO_FN_MDC,
+
+	/* System (PTJ) */
+	GPIO_FN_PDSTATUS, GPIO_FN_STATUS2, GPIO_FN_STATUS0,
+
+	/* VOU (PTL/PTM/PTN*/
+	GPIO_FN_DV_D15,  GPIO_FN_DV_D14, GPIO_FN_DV_D13,   GPIO_FN_DV_D12,
+	GPIO_FN_DV_D11,  GPIO_FN_DV_D10, GPIO_FN_DV_D9,    GPIO_FN_DV_D8,
+	GPIO_FN_DV_D7,   GPIO_FN_DV_D6,  GPIO_FN_DV_D5,    GPIO_FN_DV_D4,
+	GPIO_FN_DV_D3,   GPIO_FN_DV_D2,  GPIO_FN_DV_D1,    GPIO_FN_DV_D0,
+	GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC,
+
+	/* MSIOF0 (PTL/PTM) */
+	GPIO_FN_MSIOF0_RXD,   GPIO_FN_MSIOF0_TXD,
+	GPIO_FN_MSIOF0_MCK,   GPIO_FN_MSIOF0_TSCK,
+	GPIO_FN_MSIOF0_SS1,   GPIO_FN_MSIOF0_SS2,
+	GPIO_FN_MSIOF0_TSYNC, GPIO_FN_MSIOF0_RSCK,
+	GPIO_FN_MSIOF0_RSYNC,
+
+	/* MSIOF1 (PTV) */
+	GPIO_FN_MSIOF1_RXD,   GPIO_FN_MSIOF1_TXD,
+	GPIO_FN_MSIOF1_MCK,   GPIO_FN_MSIOF1_TSCK,
+	GPIO_FN_MSIOF1_SS1,   GPIO_FN_MSIOF1_SS2,
+	GPIO_FN_MSIOF1_TSYNC, GPIO_FN_MSIOF1_RSCK,
+	GPIO_FN_MSIOF1_RSYNC,
+
+	/* DMAC (PTU/PTX) */
+	GPIO_FN_DMAC_DACK0, GPIO_FN_DMAC_DREQ0,
+	GPIO_FN_DMAC_DACK1, GPIO_FN_DMAC_DREQ1,
+
+	/* SDHI0 (PTY) */
+	GPIO_FN_SDHI0CD, GPIO_FN_SDHI0WP, GPIO_FN_SDHI0CMD, GPIO_FN_SDHI0CLK,
+	GPIO_FN_SDHI0D3, GPIO_FN_SDHI0D2, GPIO_FN_SDHI0D1,  GPIO_FN_SDHI0D0,
+
+	/* SDHI1 (PTW) */
+	GPIO_FN_SDHI1CD, GPIO_FN_SDHI1WP, GPIO_FN_SDHI1CMD, GPIO_FN_SDHI1CLK,
+	GPIO_FN_SDHI1D3, GPIO_FN_SDHI1D2, GPIO_FN_SDHI1D1,  GPIO_FN_SDHI1D0,
+
+	/* MMC (PTW/PTX)*/
+	GPIO_FN_MMC_D7,  GPIO_FN_MMC_D6,  GPIO_FN_MMC_D5, GPIO_FN_MMC_D4,
+	GPIO_FN_MMC_D3,  GPIO_FN_MMC_D2,  GPIO_FN_MMC_D1, GPIO_FN_MMC_D0,
+	GPIO_FN_MMC_CLK, GPIO_FN_MMC_CMD,
+
+	/* IrDA (PTX) */
+	GPIO_FN_IRDA_OUT, GPIO_FN_IRDA_IN,
+
+	/* TSIF (PTX) */
+	GPIO_FN_TSIF_TS0_SDAT, GPIO_FN_TSIF_TS0_SCK,
+	GPIO_FN_TSIF_TS0_SDEN, GPIO_FN_TSIF_TS0_SPSYNC,
+
+	/* IRQ (PTZ) */
+	GPIO_FN_INTC_IRQ7, GPIO_FN_INTC_IRQ6, GPIO_FN_INTC_IRQ5,
+	GPIO_FN_INTC_IRQ4, GPIO_FN_INTC_IRQ3, GPIO_FN_INTC_IRQ2,
+	GPIO_FN_INTC_IRQ1, GPIO_FN_INTC_IRQ0,
+};
+
+enum {
+	HWBLK_TLB, HWBLK_IC, HWBLK_OC, HWBLK_RSMEM, HWBLK_ILMEM, HWBLK_L2C,
+	HWBLK_FPU, HWBLK_INTC, HWBLK_DMAC0, HWBLK_SHYWAY,
+	HWBLK_HUDI, HWBLK_UBC,
+	HWBLK_TMU0, HWBLK_CMT, HWBLK_RWDT, HWBLK_DMAC1, HWBLK_TMU1,
+	HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2, HWBLK_SCIF3,
+	HWBLK_SCIF4, HWBLK_SCIF5, HWBLK_MSIOF0, HWBLK_MSIOF1,
+	HWBLK_KEYSC, HWBLK_RTC, HWBLK_IIC0, HWBLK_IIC1,
+	HWBLK_MMC, HWBLK_ETHER, HWBLK_ATAPI, HWBLK_TPU, HWBLK_IRDA,
+	HWBLK_TSIF, HWBLK_USB1, HWBLK_USB0, HWBLK_2DG,
+	HWBLK_SDHI0, HWBLK_SDHI1, HWBLK_VEU1, HWBLK_CEU1, HWBLK_BEU1,
+	HWBLK_2DDMAC, HWBLK_SPU, HWBLK_JPU, HWBLK_VOU,
+	HWBLK_BEU0, HWBLK_CEU0,	HWBLK_VEU0, HWBLK_VPU, HWBLK_LCDC,
+	HWBLK_NR,
+};
+
+enum {
+	SHDMA_SLAVE_INVALID,
+	SHDMA_SLAVE_SCIF0_TX,
+	SHDMA_SLAVE_SCIF0_RX,
+	SHDMA_SLAVE_SCIF1_TX,
+	SHDMA_SLAVE_SCIF1_RX,
+	SHDMA_SLAVE_SCIF2_TX,
+	SHDMA_SLAVE_SCIF2_RX,
+	SHDMA_SLAVE_SCIF3_TX,
+	SHDMA_SLAVE_SCIF3_RX,
+	SHDMA_SLAVE_SCIF4_TX,
+	SHDMA_SLAVE_SCIF4_RX,
+	SHDMA_SLAVE_SCIF5_TX,
+	SHDMA_SLAVE_SCIF5_RX,
+	SHDMA_SLAVE_USB0D0_TX,
+	SHDMA_SLAVE_USB0D0_RX,
+	SHDMA_SLAVE_USB0D1_TX,
+	SHDMA_SLAVE_USB0D1_RX,
+	SHDMA_SLAVE_USB1D0_TX,
+	SHDMA_SLAVE_USB1D0_RX,
+	SHDMA_SLAVE_USB1D1_TX,
+	SHDMA_SLAVE_USB1D1_RX,
+	SHDMA_SLAVE_SDHI0_TX,
+	SHDMA_SLAVE_SDHI0_RX,
+	SHDMA_SLAVE_SDHI1_TX,
+	SHDMA_SLAVE_SDHI1_RX,
+};
+
+extern struct clk sh7724_fsimcka_clk;
+extern struct clk sh7724_fsimckb_clk;
+extern struct clk sh7724_dv_clki;
+
+#endif /* __ASM_SH7724_H__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7734.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7734.h
new file mode 100644
index 0000000..82b6320
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7734.h
@@ -0,0 +1,307 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH7734_H__
+#define __ASM_SH7734_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_GP_x_x - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	GPIO_GP_0_0, GPIO_GP_0_1, GPIO_GP_0_2, GPIO_GP_0_3,
+	GPIO_GP_0_4, GPIO_GP_0_5, GPIO_GP_0_6, GPIO_GP_0_7,
+	GPIO_GP_0_8, GPIO_GP_0_9, GPIO_GP_0_10, GPIO_GP_0_11,
+	GPIO_GP_0_12, GPIO_GP_0_13, GPIO_GP_0_14, GPIO_GP_0_15,
+	GPIO_GP_0_16, GPIO_GP_0_17, GPIO_GP_0_18, GPIO_GP_0_19,
+	GPIO_GP_0_20, GPIO_GP_0_21, GPIO_GP_0_22, GPIO_GP_0_23,
+	GPIO_GP_0_24, GPIO_GP_0_25, GPIO_GP_0_26, GPIO_GP_0_27,
+	GPIO_GP_0_28, GPIO_GP_0_29, GPIO_GP_0_30, GPIO_GP_0_31,
+
+	GPIO_GP_1_0, GPIO_GP_1_1, GPIO_GP_1_2, GPIO_GP_1_3,
+	GPIO_GP_1_4, GPIO_GP_1_5, GPIO_GP_1_6, GPIO_GP_1_7,
+	GPIO_GP_1_8, GPIO_GP_1_9, GPIO_GP_1_10, GPIO_GP_1_11,
+	GPIO_GP_1_12, GPIO_GP_1_13, GPIO_GP_1_14, GPIO_GP_1_15,
+	GPIO_GP_1_16, GPIO_GP_1_17, GPIO_GP_1_18, GPIO_GP_1_19,
+	GPIO_GP_1_20, GPIO_GP_1_21, GPIO_GP_1_22, GPIO_GP_1_23,
+	GPIO_GP_1_24, GPIO_GP_1_25, GPIO_GP_1_26, GPIO_GP_1_27,
+	GPIO_GP_1_28, GPIO_GP_1_29, GPIO_GP_1_30, GPIO_GP_1_31,
+
+	GPIO_GP_2_0, GPIO_GP_2_1, GPIO_GP_2_2, GPIO_GP_2_3,
+	GPIO_GP_2_4, GPIO_GP_2_5, GPIO_GP_2_6, GPIO_GP_2_7,
+	GPIO_GP_2_8, GPIO_GP_2_9, GPIO_GP_2_10, GPIO_GP_2_11,
+	GPIO_GP_2_12, GPIO_GP_2_13, GPIO_GP_2_14, GPIO_GP_2_15,
+	GPIO_GP_2_16, GPIO_GP_2_17, GPIO_GP_2_18, GPIO_GP_2_19,
+	GPIO_GP_2_20, GPIO_GP_2_21, GPIO_GP_2_22, GPIO_GP_2_23,
+	GPIO_GP_2_24, GPIO_GP_2_25, GPIO_GP_2_26, GPIO_GP_2_27,
+	GPIO_GP_2_28, GPIO_GP_2_29, GPIO_GP_2_30, GPIO_GP_2_31,
+
+	GPIO_GP_3_0, GPIO_GP_3_1, GPIO_GP_3_2, GPIO_GP_3_3,
+	GPIO_GP_3_4, GPIO_GP_3_5, GPIO_GP_3_6, GPIO_GP_3_7,
+	GPIO_GP_3_8, GPIO_GP_3_9, GPIO_GP_3_10, GPIO_GP_3_11,
+	GPIO_GP_3_12, GPIO_GP_3_13, GPIO_GP_3_14, GPIO_GP_3_15,
+	GPIO_GP_3_16, GPIO_GP_3_17, GPIO_GP_3_18, GPIO_GP_3_19,
+	GPIO_GP_3_20, GPIO_GP_3_21, GPIO_GP_3_22, GPIO_GP_3_23,
+	GPIO_GP_3_24, GPIO_GP_3_25, GPIO_GP_3_26, GPIO_GP_3_27,
+	GPIO_GP_3_28, GPIO_GP_3_29, GPIO_GP_3_30, GPIO_GP_3_31,
+
+	GPIO_GP_4_0, GPIO_GP_4_1, GPIO_GP_4_2, GPIO_GP_4_3,
+	GPIO_GP_4_4, GPIO_GP_4_5, GPIO_GP_4_6, GPIO_GP_4_7,
+	GPIO_GP_4_8, GPIO_GP_4_9, GPIO_GP_4_10, GPIO_GP_4_11,
+	GPIO_GP_4_12, GPIO_GP_4_13, GPIO_GP_4_14, GPIO_GP_4_15,
+	GPIO_GP_4_16, GPIO_GP_4_17, GPIO_GP_4_18, GPIO_GP_4_19,
+	GPIO_GP_4_20, GPIO_GP_4_21, GPIO_GP_4_22, GPIO_GP_4_23,
+	GPIO_GP_4_24, GPIO_GP_4_25, GPIO_GP_4_26, GPIO_GP_4_27,
+	GPIO_GP_4_28, GPIO_GP_4_29, GPIO_GP_4_30, GPIO_GP_4_31,
+
+	GPIO_GP_5_0, GPIO_GP_5_1, GPIO_GP_5_2, GPIO_GP_5_3,
+	GPIO_GP_5_4, GPIO_GP_5_5, GPIO_GP_5_6, GPIO_GP_5_7,
+	GPIO_GP_5_8, GPIO_GP_5_9, GPIO_GP_5_10, GPIO_GP_5_11,
+
+	GPIO_FN_CLKOUT, GPIO_FN_BS, GPIO_FN_CS0, GPIO_FN_EX_CS0, GPIO_FN_RD,
+		GPIO_FN_WE0, GPIO_FN_WE1,
+
+	GPIO_FN_SCL0, GPIO_FN_PENC0, GPIO_FN_USB_OVC0,
+
+	GPIO_FN_IRQ2_B, GPIO_FN_IRQ3_B,
+
+	/* IPSR0 */
+	GPIO_FN_A15, GPIO_FN_ST0_VCO_CLKIN, GPIO_FN_LCD_DATA15_A,
+		GPIO_FN_TIOC3D_C,
+	GPIO_FN_A14, GPIO_FN_LCD_DATA14_A, GPIO_FN_TIOC3C_C,
+	GPIO_FN_A13, GPIO_FN_LCD_DATA13_A, GPIO_FN_TIOC3B_C,
+	GPIO_FN_A12, GPIO_FN_LCD_DATA12_A, GPIO_FN_TIOC3A_C,
+	GPIO_FN_A11, GPIO_FN_ST0_D7, GPIO_FN_LCD_DATA11_A,
+		GPIO_FN_TIOC2B_C,
+	GPIO_FN_A10, GPIO_FN_ST0_D6, GPIO_FN_LCD_DATA10_A,
+		GPIO_FN_TIOC2A_C,
+	GPIO_FN_A9, GPIO_FN_ST0_D5, GPIO_FN_LCD_DATA9_A,
+		GPIO_FN_TIOC1B_C,
+	GPIO_FN_A8, GPIO_FN_ST0_D4, GPIO_FN_LCD_DATA8_A,
+		GPIO_FN_TIOC1A_C,
+	GPIO_FN_A7, GPIO_FN_ST0_D3, GPIO_FN_LCD_DATA7_A, GPIO_FN_TIOC0D_C,
+	GPIO_FN_A6, GPIO_FN_ST0_D2, GPIO_FN_LCD_DATA6_A, GPIO_FN_TIOC0C_C,
+	GPIO_FN_A5, GPIO_FN_ST0_D1, GPIO_FN_LCD_DATA5_A, GPIO_FN_TIOC0B_C,
+	GPIO_FN_A4, GPIO_FN_ST0_D0, GPIO_FN_LCD_DATA4_A, GPIO_FN_TIOC0A_C,
+	GPIO_FN_A3, GPIO_FN_ST0_VLD, GPIO_FN_LCD_DATA3_A, GPIO_FN_TCLKD_C,
+	GPIO_FN_A2, GPIO_FN_ST0_SYC, GPIO_FN_LCD_DATA2_A, GPIO_FN_TCLKC_C,
+	GPIO_FN_A1, GPIO_FN_ST0_REQ, GPIO_FN_LCD_DATA1_A, GPIO_FN_TCLKB_C,
+	GPIO_FN_A0, GPIO_FN_ST0_CLKIN, GPIO_FN_LCD_DATA0_A, GPIO_FN_TCLKA_C,
+
+	/* IPSR1 */
+	GPIO_FN_D3, GPIO_FN_SD0_DAT3_A, GPIO_FN_MMC_D3_A, GPIO_FN_ST1_D6,
+		GPIO_FN_FD3_A,
+	GPIO_FN_D2, GPIO_FN_SD0_DAT2_A, GPIO_FN_MMC_D2_A, GPIO_FN_ST1_D5,
+		GPIO_FN_FD2_A,
+	GPIO_FN_D1, GPIO_FN_SD0_DAT1_A, GPIO_FN_MMC_D1_A, GPIO_FN_ST1_D4,
+		GPIO_FN_FD1_A,
+	GPIO_FN_D0, GPIO_FN_SD0_DAT0_A, GPIO_FN_MMC_D0_A, GPIO_FN_ST1_D3,
+		GPIO_FN_FD0_A,
+	GPIO_FN_A25, GPIO_FN_TX2_D, GPIO_FN_ST1_D2,
+	GPIO_FN_A24, GPIO_FN_RX2_D, GPIO_FN_ST1_D1,
+	GPIO_FN_A23, GPIO_FN_ST1_D0, GPIO_FN_LCD_M_DISP_A,
+	GPIO_FN_A22, GPIO_FN_ST1_VLD, GPIO_FN_LCD_VEPWC_A,
+	GPIO_FN_A21, GPIO_FN_ST1_SYC, GPIO_FN_LCD_VCPWC_A,
+	GPIO_FN_A20, GPIO_FN_ST1_REQ, GPIO_FN_LCD_FLM_A,
+	GPIO_FN_A19, GPIO_FN_ST1_CLKIN, GPIO_FN_LCD_CLK_A, GPIO_FN_TIOC4D_C,
+	GPIO_FN_A18, GPIO_FN_ST1_PWM, GPIO_FN_LCD_CL2_A, GPIO_FN_TIOC4C_C,
+	GPIO_FN_A17, GPIO_FN_ST1_VCO_CLKIN, GPIO_FN_LCD_CL1_A, GPIO_FN_TIOC4B_C,
+	GPIO_FN_A16, GPIO_FN_ST0_PWM, GPIO_FN_LCD_DON_A, GPIO_FN_TIOC4A_C,
+
+	/* IPSR2 */
+	GPIO_FN_D14, GPIO_FN_TX2_B, GPIO_FN_FSE_A, GPIO_FN_ET0_TX_CLK_B,
+	GPIO_FN_D13, GPIO_FN_RX2_B, GPIO_FN_FRB_A,	GPIO_FN_ET0_ETXD6_B,
+	GPIO_FN_D12, GPIO_FN_FWE_A, GPIO_FN_ET0_ETXD5_B,
+	GPIO_FN_D11, GPIO_FN_RSPI_MISO_A, GPIO_FN_QMI_QIO1_A,
+		GPIO_FN_FRE_A, GPIO_FN_ET0_ETXD3_B,
+	GPIO_FN_D10, GPIO_FN_RSPI_MOSI_A, GPIO_FN_QMO_QIO0_A,
+		GPIO_FN_FALE_A, GPIO_FN_ET0_ETXD2_B,
+	GPIO_FN_D9, GPIO_FN_SD0_CMD_A, GPIO_FN_MMC_CMD_A, GPIO_FN_QIO3_A,
+		GPIO_FN_FCLE_A, GPIO_FN_ET0_ETXD1_B,
+	GPIO_FN_D8, GPIO_FN_SD0_CLK_A, GPIO_FN_MMC_CLK_A, GPIO_FN_QIO2_A,
+		GPIO_FN_FCE_A, GPIO_FN_ET0_GTX_CLK_B,
+	GPIO_FN_D7, GPIO_FN_RSPI_SSL_A, GPIO_FN_MMC_D7_A, GPIO_FN_QSSL_A,
+		GPIO_FN_FD7_A,
+	GPIO_FN_D6, GPIO_FN_RSPI_RSPCK_A, GPIO_FN_MMC_D6_A, GPIO_FN_QSPCLK_A,
+		GPIO_FN_FD6_A,
+	GPIO_FN_D5, GPIO_FN_SD0_WP_A, GPIO_FN_MMC_D5_A, GPIO_FN_FD5_A,
+	GPIO_FN_D4, GPIO_FN_SD0_CD_A, GPIO_FN_MMC_D4_A, GPIO_FN_ST1_D7,
+		GPIO_FN_FD4_A,
+
+	/* IPSR3 */
+	GPIO_FN_DRACK0, GPIO_FN_SD1_DAT2_A, GPIO_FN_ATAG, GPIO_FN_TCLK1_A,
+		GPIO_FN_ET0_ETXD7,
+	GPIO_FN_EX_WAIT2, GPIO_FN_SD1_DAT1_A, GPIO_FN_DACK2, GPIO_FN_CAN1_RX_C,
+		GPIO_FN_ET0_MAGIC_C, GPIO_FN_ET0_ETXD6_A,
+	GPIO_FN_EX_WAIT1, GPIO_FN_SD1_DAT0_A, GPIO_FN_DREQ2, GPIO_FN_CAN1_TX_C,
+		GPIO_FN_ET0_LINK_C, GPIO_FN_ET0_ETXD5_A,
+	GPIO_FN_EX_WAIT0, GPIO_FN_TCLK1_B,
+	GPIO_FN_RD_WR, GPIO_FN_TCLK0, GPIO_FN_CAN_CLK_B, GPIO_FN_ET0_ETXD4,
+	GPIO_FN_EX_CS5, GPIO_FN_SD1_CMD_A, GPIO_FN_ATADIR, GPIO_FN_QSSL_B,
+		GPIO_FN_ET0_ETXD3_A,
+	GPIO_FN_EX_CS4, GPIO_FN_SD1_WP_A, GPIO_FN_ATAWR, GPIO_FN_QMI_QIO1_B,
+		GPIO_FN_ET0_ETXD2_A,
+	GPIO_FN_EX_CS3, GPIO_FN_SD1_CD_A, GPIO_FN_ATARD, GPIO_FN_QMO_QIO0_B,
+		GPIO_FN_ET0_ETXD1_A,
+	GPIO_FN_EX_CS2, GPIO_FN_TX3_B, GPIO_FN_ATACS1, GPIO_FN_QSPCLK_B,
+		GPIO_FN_ET0_GTX_CLK_A,
+	GPIO_FN_EX_CS1, GPIO_FN_RX3_B, GPIO_FN_ATACS0, GPIO_FN_QIO2_B,
+		GPIO_FN_ET0_ETXD0,
+	GPIO_FN_CS1_A26, GPIO_FN_QIO3_B,
+	GPIO_FN_D15, GPIO_FN_SCK2_B,
+
+	/* IPSR4 */
+	GPIO_FN_SCK2_A, GPIO_FN_VI0_G3,
+	GPIO_FN_RTS1_B, GPIO_FN_VI0_G2,
+	GPIO_FN_CTS1_B, GPIO_FN_VI0_DATA7_VI0_G1,
+	GPIO_FN_TX1_B, GPIO_FN_VI0_DATA6_VI0_G0, GPIO_FN_ET0_PHY_INT_A,
+	GPIO_FN_RX1_B, GPIO_FN_VI0_DATA5_VI0_B5, GPIO_FN_ET0_MAGIC_A,
+	GPIO_FN_SCK1_B, GPIO_FN_VI0_DATA4_VI0_B4, GPIO_FN_ET0_LINK_A,
+	GPIO_FN_RTS0_B, GPIO_FN_VI0_DATA3_VI0_B3, GPIO_FN_ET0_MDIO_A,
+	GPIO_FN_CTS0_B, GPIO_FN_VI0_DATA2_VI0_B2, GPIO_FN_RMII0_MDIO_A,
+		GPIO_FN_ET0_MDC,
+	GPIO_FN_HTX0_A, GPIO_FN_TX1_A, GPIO_FN_VI0_DATA1_VI0_B1,
+		GPIO_FN_RMII0_MDC_A, GPIO_FN_ET0_COL,
+	GPIO_FN_HRX0_A, GPIO_FN_RX1_A, GPIO_FN_VI0_DATA0_VI0_B0,
+		GPIO_FN_RMII0_CRS_DV_A, GPIO_FN_ET0_CRS,
+	GPIO_FN_HSCK0_A, GPIO_FN_SCK1_A, GPIO_FN_VI0_VSYNC,
+		GPIO_FN_RMII0_RX_ER_A, GPIO_FN_ET0_RX_ER,
+	GPIO_FN_HRTS0_A, GPIO_FN_RTS1_A, GPIO_FN_VI0_HSYNC,
+		GPIO_FN_RMII0_TXD_EN_A, GPIO_FN_ET0_RX_DV,
+	GPIO_FN_HCTS0_A, GPIO_FN_CTS1_A, GPIO_FN_VI0_FIELD,
+		GPIO_FN_RMII0_RXD1_A, GPIO_FN_ET0_ERXD7,
+
+	/* IPSR5 */
+	GPIO_FN_SD2_CLK_A, GPIO_FN_RX2_A, GPIO_FN_VI0_G4, GPIO_FN_ET0_RX_CLK_B,
+	GPIO_FN_SD2_CMD_A, GPIO_FN_TX2_A, GPIO_FN_VI0_G5, GPIO_FN_ET0_ERXD2_B,
+	GPIO_FN_SD2_DAT0_A, GPIO_FN_RX3_A, GPIO_FN_VI0_R0, GPIO_FN_ET0_ERXD3_B,
+	GPIO_FN_SD2_DAT1_A, GPIO_FN_TX3_A, GPIO_FN_VI0_R1, GPIO_FN_ET0_MDIO_B,
+	GPIO_FN_SD2_DAT2_A, GPIO_FN_RX4_A, GPIO_FN_VI0_R2, GPIO_FN_ET0_LINK_B,
+	GPIO_FN_SD2_DAT3_A, GPIO_FN_TX4_A, GPIO_FN_VI0_R3, GPIO_FN_ET0_MAGIC_B,
+	GPIO_FN_SD2_CD_A, GPIO_FN_RX5_A, GPIO_FN_VI0_R4, GPIO_FN_ET0_PHY_INT_B,
+	GPIO_FN_SD2_WP_A, GPIO_FN_TX5_A, GPIO_FN_VI0_R5,
+	GPIO_FN_REF125CK, GPIO_FN_ADTRG, GPIO_FN_RX5_C,
+	GPIO_FN_REF50CK, GPIO_FN_CTS1_E, GPIO_FN_HCTS0_D,
+
+	/* IPSR6 */
+	GPIO_FN_DU0_DR0, GPIO_FN_SCIF_CLK_B, GPIO_FN_HRX0_D, GPIO_FN_IETX_A,
+		GPIO_FN_TCLKA_A, GPIO_FN_HIFD00,
+	GPIO_FN_DU0_DR1, GPIO_FN_SCK0_B, GPIO_FN_HTX0_D, GPIO_FN_IERX_A,
+		GPIO_FN_TCLKB_A, GPIO_FN_HIFD01,
+	GPIO_FN_DU0_DR2, GPIO_FN_RX0_B, GPIO_FN_TCLKC_A, GPIO_FN_HIFD02,
+	GPIO_FN_DU0_DR3, GPIO_FN_TX0_B, GPIO_FN_TCLKD_A, GPIO_FN_HIFD03,
+	GPIO_FN_DU0_DR4, GPIO_FN_CTS0_C, GPIO_FN_TIOC0A_A, GPIO_FN_HIFD04,
+	GPIO_FN_DU0_DR5, GPIO_FN_RTS0_C, GPIO_FN_TIOC0B_A, GPIO_FN_HIFD05,
+	GPIO_FN_DU0_DR6, GPIO_FN_SCK1_C, GPIO_FN_TIOC0C_A, GPIO_FN_HIFD06,
+	GPIO_FN_DU0_DR7, GPIO_FN_RX1_C, GPIO_FN_TIOC0D_A, GPIO_FN_HIFD07,
+	GPIO_FN_DU0_DG0, GPIO_FN_TX1_C, GPIO_FN_HSCK0_D, GPIO_FN_IECLK_A,
+		GPIO_FN_TIOC1A_A, GPIO_FN_HIFD08,
+	GPIO_FN_DU0_DG1, GPIO_FN_CTS1_C, GPIO_FN_HRTS0_D, GPIO_FN_TIOC1B_A,
+		GPIO_FN_HIFD09,
+
+	/* IPSR7 */
+	GPIO_FN_DU0_DG2, GPIO_FN_RTS1_C, GPIO_FN_RMII0_MDC_B, GPIO_FN_TIOC2A_A,
+		GPIO_FN_HIFD10,
+	GPIO_FN_DU0_DG3, GPIO_FN_SCK2_C, GPIO_FN_RMII0_MDIO_B, GPIO_FN_TIOC2B_A,
+		GPIO_FN_HIFD11,
+	GPIO_FN_DU0_DG4, GPIO_FN_RX2_C, GPIO_FN_RMII0_CRS_DV_B,
+		GPIO_FN_TIOC3A_A, GPIO_FN_HIFD12,
+	GPIO_FN_DU0_DG5, GPIO_FN_TX2_C, GPIO_FN_RMII0_RX_ER_B,
+		GPIO_FN_TIOC3B_A, GPIO_FN_HIFD13,
+	GPIO_FN_DU0_DG6, GPIO_FN_RX3_C, GPIO_FN_RMII0_RXD0_B,
+		GPIO_FN_TIOC3C_A, GPIO_FN_HIFD14,
+	GPIO_FN_DU0_DG7, GPIO_FN_TX3_C, GPIO_FN_RMII0_RXD1_B,
+		GPIO_FN_TIOC3D_A, GPIO_FN_HIFD15,
+	GPIO_FN_DU0_DB0, GPIO_FN_RX4_C, GPIO_FN_RMII0_TXD_EN_B,
+		GPIO_FN_TIOC4A_A, GPIO_FN_HIFCS,
+	GPIO_FN_DU0_DB1, GPIO_FN_TX4_C, GPIO_FN_RMII0_TXD0_B,
+		GPIO_FN_TIOC4B_A, GPIO_FN_HIFRS,
+	GPIO_FN_DU0_DB2, GPIO_FN_RX5_B, GPIO_FN_RMII0_TXD1_B,
+		GPIO_FN_TIOC4C_A, GPIO_FN_HIFWR,
+	GPIO_FN_DU0_DB3, GPIO_FN_TX5_B, GPIO_FN_TIOC4D_A, GPIO_FN_HIFRD,
+	GPIO_FN_DU0_DB4, GPIO_FN_HIFINT,
+
+	/* IPSR8 */
+	GPIO_FN_DU0_DB5, GPIO_FN_HIFDREQ,
+	GPIO_FN_DU0_DB6, GPIO_FN_HIFRDY,
+	GPIO_FN_DU0_DB7, GPIO_FN_SSI_SCK0_B, GPIO_FN_HIFEBL_B,
+	GPIO_FN_DU0_DOTCLKIN, GPIO_FN_HSPI_CS0_C, GPIO_FN_SSI_WS0_B,
+	GPIO_FN_DU0_DOTCLKOUT, GPIO_FN_HSPI_CLK0_C, GPIO_FN_SSI_SDATA0_B,
+	GPIO_FN_DU0_EXHSYNC_DU0_HSYNC, GPIO_FN_HSPI_TX0_C, GPIO_FN_SSI_SCK1_B,
+	GPIO_FN_DU0_EXVSYNC_DU0_VSYNC, GPIO_FN_HSPI_RX0_C, GPIO_FN_SSI_WS1_B,
+	GPIO_FN_DU0_EXODDF_DU0_ODDF, GPIO_FN_CAN0_RX_B, GPIO_FN_HSCK0_B,
+		GPIO_FN_SSI_SDATA1_B,
+	GPIO_FN_DU0_DISP, GPIO_FN_CAN0_TX_B, GPIO_FN_HRX0_B,
+		GPIO_FN_AUDIO_CLKA_B,
+	GPIO_FN_DU0_CDE, GPIO_FN_HTX0_B, GPIO_FN_AUDIO_CLKB_B,
+		GPIO_FN_LCD_VCPWC_B,
+	GPIO_FN_IRQ0_A, GPIO_FN_HSPI_TX_B, GPIO_FN_RX3_E, GPIO_FN_ET0_ERXD0,
+	GPIO_FN_IRQ1_A, GPIO_FN_HSPI_RX_B, GPIO_FN_TX3_E, GPIO_FN_ET0_ERXD1,
+	GPIO_FN_IRQ2_A, GPIO_FN_CTS0_A, GPIO_FN_HCTS0_B, GPIO_FN_ET0_ERXD2_A,
+	GPIO_FN_IRQ3_A, GPIO_FN_RTS0_A, GPIO_FN_HRTS0_B, GPIO_FN_ET0_ERXD3_A,
+
+	/* IPSR9 */
+	GPIO_FN_VI1_CLK_A, GPIO_FN_FD0_B, GPIO_FN_LCD_DATA0_B,
+	GPIO_FN_VI1_0_A, GPIO_FN_FD1_B, GPIO_FN_LCD_DATA1_B,
+	GPIO_FN_VI1_1_A, GPIO_FN_FD2_B, GPIO_FN_LCD_DATA2_B,
+	GPIO_FN_VI1_2_A, GPIO_FN_FD3_B, GPIO_FN_LCD_DATA3_B,
+	GPIO_FN_VI1_3_A, GPIO_FN_FD4_B, GPIO_FN_LCD_DATA4_B,
+	GPIO_FN_VI1_4_A, GPIO_FN_FD5_B, GPIO_FN_LCD_DATA5_B,
+	GPIO_FN_VI1_5_A, GPIO_FN_FD6_B, GPIO_FN_LCD_DATA6_B,
+	GPIO_FN_VI1_6_A, GPIO_FN_FD7_B, GPIO_FN_LCD_DATA7_B,
+	GPIO_FN_VI1_7_A, GPIO_FN_FCE_B, GPIO_FN_LCD_DATA8_B,
+	GPIO_FN_SSI_SCK0_A, GPIO_FN_TIOC1A_B, GPIO_FN_LCD_DATA9_B,
+	GPIO_FN_SSI_WS0_A, GPIO_FN_TIOC1B_B, GPIO_FN_LCD_DATA10_B,
+	GPIO_FN_SSI_SDATA0_A, GPIO_FN_VI1_0_B, GPIO_FN_TIOC2A_B,
+		GPIO_FN_LCD_DATA11_B,
+	GPIO_FN_SSI_SCK1_A, GPIO_FN_VI1_1_B, GPIO_FN_TIOC2B_B,
+		GPIO_FN_LCD_DATA12_B,
+	GPIO_FN_SSI_WS1_A, GPIO_FN_VI1_2_B, GPIO_FN_LCD_DATA13_B,
+	GPIO_FN_SSI_SDATA1_A, GPIO_FN_VI1_3_B, GPIO_FN_LCD_DATA14_B,
+
+	/* IPSR10 */
+	GPIO_FN_SSI_SCK23, GPIO_FN_VI1_4_B, GPIO_FN_RX1_D, GPIO_FN_FCLE_B,
+		GPIO_FN_LCD_DATA15_B,
+	GPIO_FN_SSI_WS23, GPIO_FN_VI1_5_B, GPIO_FN_TX1_D, GPIO_FN_HSCK0_C,
+		GPIO_FN_FALE_B, GPIO_FN_LCD_DON_B,
+	GPIO_FN_SSI_SDATA2, GPIO_FN_VI1_6_B, GPIO_FN_HRX0_C, GPIO_FN_FRE_B,
+		GPIO_FN_LCD_CL1_B,
+	GPIO_FN_SSI_SDATA3, GPIO_FN_VI1_7_B, GPIO_FN_HTX0_C, GPIO_FN_FWE_B,
+		GPIO_FN_LCD_CL2_B,
+	GPIO_FN_AUDIO_CLKA_A, GPIO_FN_VI1_CLK_B, GPIO_FN_SCK1_D,
+		GPIO_FN_IECLK_B, GPIO_FN_LCD_FLM_B,
+	GPIO_FN_AUDIO_CLKB_A, GPIO_FN_LCD_CLK_B,
+	GPIO_FN_AUDIO_CLKC, GPIO_FN_SCK1_E, GPIO_FN_HCTS0_C, GPIO_FN_FRB_B,
+		GPIO_FN_LCD_VEPWC_B,
+	GPIO_FN_AUDIO_CLKOUT, GPIO_FN_TX1_E, GPIO_FN_HRTS0_C, GPIO_FN_FSE_B,
+		GPIO_FN_LCD_M_DISP_B,
+	GPIO_FN_CAN_CLK_A, GPIO_FN_RX4_D,
+	GPIO_FN_CAN0_TX_A, GPIO_FN_TX4_D, GPIO_FN_MLB_CLK,
+	GPIO_FN_CAN1_RX_A, GPIO_FN_IRQ1_B,
+	GPIO_FN_CAN0_RX_A, GPIO_FN_IRQ0_B, GPIO_FN_MLB_SIG,
+	GPIO_FN_CAN1_TX_A, GPIO_FN_TX5_C, GPIO_FN_MLB_DAT,
+
+	/* IPSR11 */
+	GPIO_FN_SCL1, GPIO_FN_SCIF_CLK_C,
+	GPIO_FN_SDA1, GPIO_FN_RX1_E,
+	GPIO_FN_SDA0, GPIO_FN_HIFEBL_A,
+	GPIO_FN_SDSELF, GPIO_FN_RTS1_E,
+	GPIO_FN_SCIF_CLK_A, GPIO_FN_HSPI_CLK_A, GPIO_FN_VI0_CLK,
+		GPIO_FN_RMII0_TXD0_A, GPIO_FN_ET0_ERXD4,
+	GPIO_FN_SCK0_A, GPIO_FN_HSPI_CS_A, GPIO_FN_VI0_CLKENB,
+		GPIO_FN_RMII0_TXD1_A, GPIO_FN_ET0_ERXD5,
+	GPIO_FN_RX0_A, GPIO_FN_HSPI_RX_A, GPIO_FN_RMII0_RXD0_A,
+		GPIO_FN_ET0_ERXD6,
+	GPIO_FN_TX0_A, GPIO_FN_HSPI_TX_A,
+	GPIO_FN_PENC1, GPIO_FN_TX3_D, GPIO_FN_CAN1_TX_B, GPIO_FN_TX5_D,
+		GPIO_FN_IETX_B,
+	GPIO_FN_USB_OVC1, GPIO_FN_RX3_D, GPIO_FN_CAN1_RX_B, GPIO_FN_RX5_D,
+		GPIO_FN_IERX_B,
+	GPIO_FN_DREQ0, GPIO_FN_SD1_CLK_A, GPIO_FN_ET0_TX_EN,
+	GPIO_FN_DACK0, GPIO_FN_SD1_DAT3_A, GPIO_FN_ET0_TX_ER,
+	GPIO_FN_DREQ1, GPIO_FN_HSPI_CLK_B, GPIO_FN_RX4_B, GPIO_FN_ET0_PHY_INT_C,
+		GPIO_FN_ET0_TX_CLK_A,
+	GPIO_FN_DACK1, GPIO_FN_HSPI_CS_B, GPIO_FN_TX4_B, GPIO_FN_ET0_RX_CLK_A,
+	GPIO_FN_PRESETOUT, GPIO_FN_ST_CLKOUT,
+
+};
+
+#endif /* __ASM_SH7734_H__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7757.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7757.h
new file mode 100644
index 0000000..6781d41
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7757.h
@@ -0,0 +1,290 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH7757_H__
+#define __ASM_SH7757_H__
+
+enum {
+	/* PTA */
+	GPIO_PTA0, GPIO_PTA1, GPIO_PTA2, GPIO_PTA3,
+	GPIO_PTA4, GPIO_PTA5, GPIO_PTA6, GPIO_PTA7,
+
+	/* PTB */
+	GPIO_PTB0, GPIO_PTB1, GPIO_PTB2, GPIO_PTB3,
+	GPIO_PTB4, GPIO_PTB5, GPIO_PTB6, GPIO_PTB7,
+
+	/* PTC */
+	GPIO_PTC0, GPIO_PTC1, GPIO_PTC2, GPIO_PTC3,
+	GPIO_PTC4, GPIO_PTC5, GPIO_PTC6, GPIO_PTC7,
+
+	/* PTD */
+	GPIO_PTD0, GPIO_PTD1, GPIO_PTD2, GPIO_PTD3,
+	GPIO_PTD4, GPIO_PTD5, GPIO_PTD6, GPIO_PTD7,
+
+	/* PTE */
+	GPIO_PTE0, GPIO_PTE1, GPIO_PTE2, GPIO_PTE3,
+	GPIO_PTE4, GPIO_PTE5, GPIO_PTE6, GPIO_PTE7,
+
+	/* PTF */
+	GPIO_PTF0, GPIO_PTF1, GPIO_PTF2, GPIO_PTF3,
+	GPIO_PTF4, GPIO_PTF5, GPIO_PTF6, GPIO_PTF7,
+
+	/* PTG */
+	GPIO_PTG0, GPIO_PTG1, GPIO_PTG2, GPIO_PTG3,
+	GPIO_PTG4, GPIO_PTG5, GPIO_PTG6, GPIO_PTG7,
+
+	/* PTH */
+	GPIO_PTH0, GPIO_PTH1, GPIO_PTH2, GPIO_PTH3,
+	GPIO_PTH4, GPIO_PTH5, GPIO_PTH6, GPIO_PTH7,
+
+	/* PTI */
+	GPIO_PTI0, GPIO_PTI1, GPIO_PTI2, GPIO_PTI3,
+	GPIO_PTI4, GPIO_PTI5, GPIO_PTI6, GPIO_PTI7,
+
+	/* PTJ */
+	GPIO_PTJ0, GPIO_PTJ1, GPIO_PTJ2, GPIO_PTJ3,
+	GPIO_PTJ4, GPIO_PTJ5, GPIO_PTJ6,
+
+	/* PTK */
+	GPIO_PTK0, GPIO_PTK1, GPIO_PTK2, GPIO_PTK3,
+	GPIO_PTK4, GPIO_PTK5, GPIO_PTK6, GPIO_PTK7,
+
+	/* PTL */
+	GPIO_PTL0, GPIO_PTL1, GPIO_PTL2, GPIO_PTL3,
+	GPIO_PTL4, GPIO_PTL5, GPIO_PTL6,
+
+	/* PTM */
+	GPIO_PTM0, GPIO_PTM1, GPIO_PTM2, GPIO_PTM3,
+	GPIO_PTM4, GPIO_PTM5, GPIO_PTM6, GPIO_PTM7,
+
+	/* PTN */
+	GPIO_PTN0, GPIO_PTN1, GPIO_PTN2, GPIO_PTN3,
+	GPIO_PTN4, GPIO_PTN5, GPIO_PTN6,
+
+	/* PTO */
+	GPIO_PTO0, GPIO_PTO1, GPIO_PTO2, GPIO_PTO3,
+	GPIO_PTO4, GPIO_PTO5, GPIO_PTO6, GPIO_PTO7,
+
+	/* PTP */
+	GPIO_PTP0, GPIO_PTP1, GPIO_PTP2, GPIO_PTP3,
+	GPIO_PTP4, GPIO_PTP5, GPIO_PTP6, GPIO_PTP7,
+
+	/* PTQ */
+	GPIO_PTQ0, GPIO_PTQ1, GPIO_PTQ2, GPIO_PTQ3,
+	GPIO_PTQ4, GPIO_PTQ5, GPIO_PTQ6,
+
+	/* PTR */
+	GPIO_PTR0, GPIO_PTR1, GPIO_PTR2, GPIO_PTR3,
+	GPIO_PTR4, GPIO_PTR5, GPIO_PTR6, GPIO_PTR7,
+
+	/* PTS */
+	GPIO_PTS0, GPIO_PTS1, GPIO_PTS2, GPIO_PTS3,
+	GPIO_PTS4, GPIO_PTS5, GPIO_PTS6, GPIO_PTS7,
+
+	/* PTT */
+	GPIO_PTT0, GPIO_PTT1, GPIO_PTT2, GPIO_PTT3,
+	GPIO_PTT4, GPIO_PTT5, GPIO_PTT6, GPIO_PTT7,
+
+	/* PTU */
+	GPIO_PTU0, GPIO_PTU1, GPIO_PTU2, GPIO_PTU3,
+	GPIO_PTU4, GPIO_PTU5, GPIO_PTU6, GPIO_PTU7,
+
+	/* PTV */
+	GPIO_PTV0, GPIO_PTV1, GPIO_PTV2, GPIO_PTV3,
+	GPIO_PTV4, GPIO_PTV5, GPIO_PTV6, GPIO_PTV7,
+
+	/* PTW */
+	GPIO_PTW0, GPIO_PTW1, GPIO_PTW2, GPIO_PTW3,
+	GPIO_PTW4, GPIO_PTW5, GPIO_PTW6, GPIO_PTW7,
+
+	/* PTX */
+	GPIO_PTX0, GPIO_PTX1, GPIO_PTX2, GPIO_PTX3,
+	GPIO_PTX4, GPIO_PTX5, GPIO_PTX6, GPIO_PTX7,
+
+	/* PTY */
+	GPIO_PTY0, GPIO_PTY1, GPIO_PTY2, GPIO_PTY3,
+	GPIO_PTY4, GPIO_PTY5, GPIO_PTY6, GPIO_PTY7,
+
+	/* PTZ */
+	GPIO_PTZ0, GPIO_PTZ1, GPIO_PTZ2, GPIO_PTZ3,
+	GPIO_PTZ4, GPIO_PTZ5, GPIO_PTZ6, GPIO_PTZ7,
+
+
+	/* PTA (mobule: LBSC, RGMII) */
+	GPIO_FN_BS,	GPIO_FN_RDWR,	GPIO_FN_WE1,	GPIO_FN_RDY,
+	GPIO_FN_ET0_MDC,	GPIO_FN_ET0_MDIO,
+	GPIO_FN_ET1_MDC,	GPIO_FN_ET1_MDIO,
+
+	/* PTB (mobule: INTC, ONFI, TMU) */
+	GPIO_FN_IRQ15,	GPIO_FN_IRQ14,	GPIO_FN_IRQ13,	GPIO_FN_IRQ12,
+	GPIO_FN_IRQ11,	GPIO_FN_IRQ10,	GPIO_FN_IRQ9,	GPIO_FN_IRQ8,
+	GPIO_FN_ON_NRE,	GPIO_FN_ON_NWE,	GPIO_FN_ON_NWP,	GPIO_FN_ON_NCE0,
+	GPIO_FN_ON_R_B0,	GPIO_FN_ON_ALE,	GPIO_FN_ON_CLE,
+	GPIO_FN_TCLK,
+
+	/* PTC (mobule: IRQ, PWMU) */
+	GPIO_FN_IRQ7,	GPIO_FN_IRQ6,	GPIO_FN_IRQ5,	GPIO_FN_IRQ4,
+	GPIO_FN_IRQ3,	GPIO_FN_IRQ2,	GPIO_FN_IRQ1,	GPIO_FN_IRQ0,
+	GPIO_FN_PWMU0,	GPIO_FN_PWMU1,	GPIO_FN_PWMU2,	GPIO_FN_PWMU3,
+	GPIO_FN_PWMU4,	GPIO_FN_PWMU5,
+
+	/* PTD (mobule: SPI0, DMAC) */
+	GPIO_FN_SP0_MOSI,	GPIO_FN_SP0_MISO,	GPIO_FN_SP0_SCK,
+	GPIO_FN_SP0_SCK_FB,	GPIO_FN_SP0_SS0,	GPIO_FN_SP0_SS1,
+	GPIO_FN_SP0_SS2,	GPIO_FN_SP0_SS3,	GPIO_FN_DREQ0,
+	GPIO_FN_DACK0,		GPIO_FN_TEND0,
+
+	/* PTE (mobule: RMII) */
+	GPIO_FN_RMII0_CRS_DV,	GPIO_FN_RMII0_TXD1,	GPIO_FN_RMII0_TXD0,
+	GPIO_FN_RMII0_TXEN,	GPIO_FN_RMII0_REFCLK,	GPIO_FN_RMII0_RXD1,
+	GPIO_FN_RMII0_RXD0,	GPIO_FN_RMII0_RX_ER,
+
+	/* PTF (mobule: RMII, SerMux) */
+	GPIO_FN_RMII1_CRS_DV,	GPIO_FN_RMII1_TXD1,	GPIO_FN_RMII1_TXD0,
+	GPIO_FN_RMII1_TXEN,	GPIO_FN_RMII1_REFCLK,	GPIO_FN_RMII1_RXD1,
+	GPIO_FN_RMII1_RXD0,	GPIO_FN_RMII1_RX_ER,	GPIO_FN_RAC_RI,
+
+	/* PTG (mobule: system, LBSC, LPC, WDT, LPC, eMMC) */
+	GPIO_FN_BOOTFMS,		GPIO_FN_BOOTWP,
+	GPIO_FN_A25,	GPIO_FN_A24,	GPIO_FN_SERIRQ,	GPIO_FN_WDTOVF,
+	GPIO_FN_LPCPD,	GPIO_FN_LDRQ,	GPIO_FN_MMCCLK,	GPIO_FN_MMCCMD,
+
+	/* PTH (mobule: SPI1, LPC, DMAC, ADC) */
+	GPIO_FN_SP1_MOSI,		GPIO_FN_SP1_MISO,
+	GPIO_FN_SP1_SCK,		GPIO_FN_SP1_SCK_FB,
+	GPIO_FN_SP1_SS0,		GPIO_FN_SP1_SS1,
+	GPIO_FN_WP,	GPIO_FN_FMS0,	GPIO_FN_TEND1,	GPIO_FN_DREQ1,
+	GPIO_FN_DACK1,	GPIO_FN_ADTRG1,	GPIO_FN_ADTRG0,
+
+	/* PTI (mobule: LBSC, SDHI) */
+	GPIO_FN_D15,	GPIO_FN_D14,	GPIO_FN_D13,	GPIO_FN_D12,
+	GPIO_FN_D11,	GPIO_FN_D10,	GPIO_FN_D9,	GPIO_FN_D8,
+	GPIO_FN_SD_WP,	GPIO_FN_SD_CD,	GPIO_FN_SD_CLK,	GPIO_FN_SD_CMD,
+	GPIO_FN_SD_D3,	GPIO_FN_SD_D2,	GPIO_FN_SD_D1,	GPIO_FN_SD_D0,
+
+	/* PTJ (mobule: SCIF234) */
+	GPIO_FN_RTS3,	GPIO_FN_CTS3,	GPIO_FN_TXD3,	GPIO_FN_RXD3,
+	GPIO_FN_RTS4,	GPIO_FN_RXD4,	GPIO_FN_TXD4,
+
+	/* PTK (mobule: SERMUX, LBSC, SCIF) */
+	GPIO_FN_COM2_TXD,	GPIO_FN_COM2_RXD,	GPIO_FN_COM2_RTS,
+	GPIO_FN_COM2_CTS,	GPIO_FN_COM2_DTR,	GPIO_FN_COM2_DSR,
+	GPIO_FN_COM2_DCD,	GPIO_FN_CLKOUT,
+	GPIO_FN_SCK2,		GPIO_FN_SCK4,	GPIO_FN_SCK3,
+
+	/* PTL (mobule: SERMUX, SCIF, LBSC, AUD) */
+	GPIO_FN_RAC_RXD,	GPIO_FN_RAC_RTS,	GPIO_FN_RAC_CTS,
+	GPIO_FN_RAC_DTR,	GPIO_FN_RAC_DSR,	GPIO_FN_RAC_DCD,
+	GPIO_FN_RAC_TXD,	GPIO_FN_RXD2,		GPIO_FN_CS5,
+	GPIO_FN_CS6,		GPIO_FN_AUDSYNC,	GPIO_FN_AUDCK,
+	GPIO_FN_TXD2,
+
+	/* PTM (mobule: LBSC, IIC) */
+	GPIO_FN_CS4,	GPIO_FN_RD,	GPIO_FN_WE0,	GPIO_FN_CS0,
+	GPIO_FN_SDA6,	GPIO_FN_SCL6,	GPIO_FN_SDA7,	GPIO_FN_SCL7,
+
+	/* PTN (mobule: USB, JMC, SGPIO, WDT) */
+	GPIO_FN_VBUS_EN,	GPIO_FN_VBUS_OC,	GPIO_FN_JMCTCK,
+	GPIO_FN_JMCTMS,		GPIO_FN_JMCTDO,		GPIO_FN_JMCTDI,
+	GPIO_FN_JMCTRST,
+	GPIO_FN_SGPIO1_CLK,	GPIO_FN_SGPIO1_LOAD,	GPIO_FN_SGPIO1_DI,
+	GPIO_FN_SGPIO1_DO,	GPIO_FN_SUB_CLKIN,
+
+	/* PTO (mobule: SGPIO, SerMux) */
+	GPIO_FN_SGPIO0_CLK,	GPIO_FN_SGPIO0_LOAD,	GPIO_FN_SGPIO0_DI,
+	GPIO_FN_SGPIO0_DO,	GPIO_FN_SGPIO2_CLK,	GPIO_FN_SGPIO2_LOAD,
+	GPIO_FN_SGPIO2_DI,	GPIO_FN_SGPIO2_DO,	GPIO_FN_COM1_TXD,
+	GPIO_FN_COM1_RXD,	GPIO_FN_COM1_RTS,	GPIO_FN_COM1_CTS,
+
+	/* PTQ (mobule: LPC) */
+	GPIO_FN_LAD3,	GPIO_FN_LAD2,	GPIO_FN_LAD1,	GPIO_FN_LAD0,
+	GPIO_FN_LFRAME,	GPIO_FN_LRESET,	GPIO_FN_LCLK,
+
+	/* PTR (mobule: GRA, IIC) */
+	GPIO_FN_DDC3,	GPIO_FN_DDC2,	GPIO_FN_SDA2,	GPIO_FN_SCL2,
+	GPIO_FN_SDA1,	GPIO_FN_SCL1,	GPIO_FN_SDA0,	GPIO_FN_SCL0,
+	GPIO_FN_SDA8,	GPIO_FN_SCL8,
+
+	/* PTS (mobule: GRA, IIC) */
+	GPIO_FN_DDC1,	GPIO_FN_DDC0,	GPIO_FN_SDA5,	GPIO_FN_SCL5,
+	GPIO_FN_SDA4,	GPIO_FN_SCL4,	GPIO_FN_SDA3,	GPIO_FN_SCL3,
+	GPIO_FN_SDA9,	GPIO_FN_SCL9,
+
+	/* PTT (mobule: PWMX, AUD) */
+	GPIO_FN_PWMX7,	GPIO_FN_PWMX6,	GPIO_FN_PWMX5,	GPIO_FN_PWMX4,
+	GPIO_FN_PWMX3,	GPIO_FN_PWMX2,	GPIO_FN_PWMX1,	GPIO_FN_PWMX0,
+	GPIO_FN_AUDATA3,	GPIO_FN_AUDATA2,	GPIO_FN_AUDATA1,
+	GPIO_FN_AUDATA0,	GPIO_FN_STATUS1,	GPIO_FN_STATUS0,
+
+	/* PTU (mobule: LPC, APM) */
+	GPIO_FN_LGPIO7,	GPIO_FN_LGPIO6,	GPIO_FN_LGPIO5,	GPIO_FN_LGPIO4,
+	GPIO_FN_LGPIO3,	GPIO_FN_LGPIO2,	GPIO_FN_LGPIO1,	GPIO_FN_LGPIO0,
+	GPIO_FN_APMONCTL_O,	GPIO_FN_APMPWBTOUT_O,	GPIO_FN_APMSCI_O,
+	GPIO_FN_APMVDDON,	GPIO_FN_APMSLPBTN,	GPIO_FN_APMPWRBTN,
+	GPIO_FN_APMS5N,		GPIO_FN_APMS3N,
+
+	/* PTV (mobule: LBSC, SerMux, R-SPI, EVC, GRA) */
+	GPIO_FN_A23,	GPIO_FN_A22,	GPIO_FN_A21,	GPIO_FN_A20,
+	GPIO_FN_A19,	GPIO_FN_A18,	GPIO_FN_A17,	GPIO_FN_A16,
+	GPIO_FN_COM2_RI,	GPIO_FN_R_SPI_MOSI,	GPIO_FN_R_SPI_MISO,
+	GPIO_FN_R_SPI_RSPCK,	GPIO_FN_R_SPI_SSL0,	GPIO_FN_R_SPI_SSL1,
+	GPIO_FN_EVENT7,		GPIO_FN_EVENT6,		GPIO_FN_VBIOS_DI,
+	GPIO_FN_VBIOS_DO,	GPIO_FN_VBIOS_CLK,	GPIO_FN_VBIOS_CS,
+
+	/* PTW (mobule: LBSC, EVC, SCIF) */
+	GPIO_FN_A15,	GPIO_FN_A14,	GPIO_FN_A13,	GPIO_FN_A12,
+	GPIO_FN_A11,	GPIO_FN_A10,	GPIO_FN_A9,	GPIO_FN_A8,
+	GPIO_FN_EVENT5,	GPIO_FN_EVENT4,	GPIO_FN_EVENT3,	GPIO_FN_EVENT2,
+	GPIO_FN_EVENT1,	GPIO_FN_EVENT0,	GPIO_FN_CTS4,	GPIO_FN_CTS2,
+
+	/* PTX (mobule: LBSC, SCIF, SIM) */
+	GPIO_FN_A7,	GPIO_FN_A6,	GPIO_FN_A5,	GPIO_FN_A4,
+	GPIO_FN_A3,	GPIO_FN_A2,	GPIO_FN_A1,	GPIO_FN_A0,
+	GPIO_FN_RTS2,	GPIO_FN_SIM_D,	GPIO_FN_SIM_CLK, GPIO_FN_SIM_RST,
+
+	/* PTY (mobule: LBSC) */
+	GPIO_FN_D7,	GPIO_FN_D6,	GPIO_FN_D5,	GPIO_FN_D4,
+	GPIO_FN_D3,	GPIO_FN_D2,	GPIO_FN_D1,	GPIO_FN_D0,
+
+	/* PTZ (mobule: eMMC, ONFI) */
+	GPIO_FN_MMCDAT7,	GPIO_FN_MMCDAT6,	GPIO_FN_MMCDAT5,
+	GPIO_FN_MMCDAT4,	GPIO_FN_MMCDAT3,	GPIO_FN_MMCDAT2,
+	GPIO_FN_MMCDAT1,	GPIO_FN_MMCDAT0,
+	GPIO_FN_ON_DQ7,	GPIO_FN_ON_DQ6,	GPIO_FN_ON_DQ5,	GPIO_FN_ON_DQ4,
+	GPIO_FN_ON_DQ3,	GPIO_FN_ON_DQ2,	GPIO_FN_ON_DQ1,	GPIO_FN_ON_DQ0,
+};
+
+enum {
+	SHDMA_SLAVE_INVALID,
+	SHDMA_SLAVE_SDHI_TX,
+	SHDMA_SLAVE_SDHI_RX,
+	SHDMA_SLAVE_MMCIF_TX,
+	SHDMA_SLAVE_MMCIF_RX,
+	SHDMA_SLAVE_SCIF2_TX,
+	SHDMA_SLAVE_SCIF2_RX,
+	SHDMA_SLAVE_SCIF3_TX,
+	SHDMA_SLAVE_SCIF3_RX,
+	SHDMA_SLAVE_SCIF4_TX,
+	SHDMA_SLAVE_SCIF4_RX,
+	SHDMA_SLAVE_RIIC0_TX,
+	SHDMA_SLAVE_RIIC0_RX,
+	SHDMA_SLAVE_RIIC1_TX,
+	SHDMA_SLAVE_RIIC1_RX,
+	SHDMA_SLAVE_RIIC2_TX,
+	SHDMA_SLAVE_RIIC2_RX,
+	SHDMA_SLAVE_RIIC3_TX,
+	SHDMA_SLAVE_RIIC3_RX,
+	SHDMA_SLAVE_RIIC4_TX,
+	SHDMA_SLAVE_RIIC4_RX,
+	SHDMA_SLAVE_RIIC5_TX,
+	SHDMA_SLAVE_RIIC5_RX,
+	SHDMA_SLAVE_RIIC6_TX,
+	SHDMA_SLAVE_RIIC6_RX,
+	SHDMA_SLAVE_RIIC7_TX,
+	SHDMA_SLAVE_RIIC7_RX,
+	SHDMA_SLAVE_RIIC8_TX,
+	SHDMA_SLAVE_RIIC8_RX,
+	SHDMA_SLAVE_RIIC9_TX,
+	SHDMA_SLAVE_RIIC9_RX,
+	SHDMA_SLAVE_RSPI_TX,
+	SHDMA_SLAVE_RSPI_RX,
+};
+#endif /* __ASM_SH7757_H__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7785.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7785.h
new file mode 100644
index 0000000..37f4207
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7785.h
@@ -0,0 +1,260 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH7785_H__
+#define __ASM_SH7785_H__
+
+/* Boot Mode Pins:
+ *
+ * MODE0: CPG - Initial Pck/Bck Frequency [FRQMR1]
+ * MODE1: CPG - Initial Uck/SHck/DDRck Frequency [FRQMR1]
+ * MODE2: CPG - Reserved (L: Normal operation)
+ * MODE3: CPG - Reserved (L: Normal operation)
+ * MODE4: CPG - Initial PLL setting (72x/36x)
+ * MODE5: LBSC - Area0 Memory Type / Bus Width [CS0BCR.8]
+ * MODE6: LBSC - Area0 Memory Type / Bus Width [CS0BCR.9]
+ * MODE7: LBSC - Area0 Memory Type / Bus Width [CS0BCR.3]
+ * MODE8: LBSC - Endian Mode (L: Big, H: Little) [BCR.31]
+ * MODE9: LBSC - Master/Slave Mode (L: Slave) [BCR.30]
+ * MODE10: CPG - Clock Input (L: Ext Clk, H: Crystal)
+ * MODE11: PCI - Pin Mode (LL: PCI host, LH: PCI slave)
+ * MODE12: PCI - Pin Mode (HL: Local bus, HH: DU)
+ * MODE13: Boot Address Mode (L: 29-bit, H: 32-bit)
+ * MODE14: Reserved (H: Normal operation)
+ *
+ * More information in sh7785 manual Rev.1.00, page 1628.
+ */
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* PA */
+	GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
+	GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
+
+	/* PB */
+	GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
+	GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
+
+	/* PC */
+	GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
+	GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
+
+	/* PD */
+	GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
+	GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
+
+	/* PE */
+	GPIO_PE5, GPIO_PE4, GPIO_PE3, GPIO_PE2,
+	GPIO_PE1, GPIO_PE0,
+
+	/* PF */
+	GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
+	GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
+
+	/* PG */
+	GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
+	GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
+
+	/* PH */
+	GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4,
+	GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
+
+	/* PJ */
+	GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
+	GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
+
+	/* PK */
+	GPIO_PK7, GPIO_PK6, GPIO_PK5, GPIO_PK4,
+	GPIO_PK3, GPIO_PK2, GPIO_PK1, GPIO_PK0,
+
+	/* PL */
+	GPIO_PL7, GPIO_PL6, GPIO_PL5, GPIO_PL4,
+	GPIO_PL3, GPIO_PL2, GPIO_PL1, GPIO_PL0,
+
+	/* PM */
+	GPIO_PM1, GPIO_PM0,
+
+	/* PN */
+	GPIO_PN7, GPIO_PN6, GPIO_PN5, GPIO_PN4,
+	GPIO_PN3, GPIO_PN2, GPIO_PN1, GPIO_PN0,
+
+	/* PP */
+	GPIO_PP5, GPIO_PP4,
+	GPIO_PP3, GPIO_PP2, GPIO_PP1, GPIO_PP0,
+
+	/* PQ */
+	GPIO_PQ4,
+	GPIO_PQ3, GPIO_PQ2, GPIO_PQ1, GPIO_PQ0,
+
+	/* PR */
+	GPIO_PR3, GPIO_PR2, GPIO_PR1, GPIO_PR0,
+
+	GPIO_FN_D63_AD31,
+	GPIO_FN_D62_AD30,
+	GPIO_FN_D61_AD29,
+	GPIO_FN_D60_AD28,
+	GPIO_FN_D59_AD27,
+	GPIO_FN_D58_AD26,
+	GPIO_FN_D57_AD25,
+	GPIO_FN_D56_AD24,
+	GPIO_FN_D55_AD23,
+	GPIO_FN_D54_AD22,
+	GPIO_FN_D53_AD21,
+	GPIO_FN_D52_AD20,
+	GPIO_FN_D51_AD19,
+	GPIO_FN_D50_AD18,
+	GPIO_FN_D49_AD17_DB5,
+	GPIO_FN_D48_AD16_DB4,
+	GPIO_FN_D47_AD15_DB3,
+	GPIO_FN_D46_AD14_DB2,
+	GPIO_FN_D45_AD13_DB1,
+	GPIO_FN_D44_AD12_DB0,
+	GPIO_FN_D43_AD11_DG5,
+	GPIO_FN_D42_AD10_DG4,
+	GPIO_FN_D41_AD9_DG3,
+	GPIO_FN_D40_AD8_DG2,
+	GPIO_FN_D39_AD7_DG1,
+	GPIO_FN_D38_AD6_DG0,
+	GPIO_FN_D37_AD5_DR5,
+	GPIO_FN_D36_AD4_DR4,
+	GPIO_FN_D35_AD3_DR3,
+	GPIO_FN_D34_AD2_DR2,
+	GPIO_FN_D33_AD1_DR1,
+	GPIO_FN_D32_AD0_DR0,
+	GPIO_FN_REQ1,
+	GPIO_FN_REQ2,
+	GPIO_FN_REQ3,
+	GPIO_FN_GNT1,
+	GPIO_FN_GNT2,
+	GPIO_FN_GNT3,
+	GPIO_FN_MMCCLK,
+	GPIO_FN_D31,
+	GPIO_FN_D30,
+	GPIO_FN_D29,
+	GPIO_FN_D28,
+	GPIO_FN_D27,
+	GPIO_FN_D26,
+	GPIO_FN_D25,
+	GPIO_FN_D24,
+	GPIO_FN_D23,
+	GPIO_FN_D22,
+	GPIO_FN_D21,
+	GPIO_FN_D20,
+	GPIO_FN_D19,
+	GPIO_FN_D18,
+	GPIO_FN_D17,
+	GPIO_FN_D16,
+	GPIO_FN_SCIF1_SCK,
+	GPIO_FN_SCIF1_RXD,
+	GPIO_FN_SCIF1_TXD,
+	GPIO_FN_SCIF0_CTS,
+	GPIO_FN_INTD,
+	GPIO_FN_FCE,
+	GPIO_FN_SCIF0_RTS,
+	GPIO_FN_HSPI_CS,
+	GPIO_FN_FSE,
+	GPIO_FN_SCIF0_SCK,
+	GPIO_FN_HSPI_CLK,
+	GPIO_FN_FRE,
+	GPIO_FN_SCIF0_RXD,
+	GPIO_FN_HSPI_RX,
+	GPIO_FN_FRB,
+	GPIO_FN_SCIF0_TXD,
+	GPIO_FN_HSPI_TX,
+	GPIO_FN_FWE,
+	GPIO_FN_SCIF5_TXD,
+	GPIO_FN_HAC1_SYNC,
+	GPIO_FN_SSI1_WS,
+	GPIO_FN_SIOF_TXD_PJ,
+	GPIO_FN_HAC0_SDOUT,
+	GPIO_FN_SSI0_SDATA,
+	GPIO_FN_SIOF_RXD_PJ,
+	GPIO_FN_HAC0_SDIN,
+	GPIO_FN_SSI0_SCK,
+	GPIO_FN_SIOF_SYNC_PJ,
+	GPIO_FN_HAC0_SYNC,
+	GPIO_FN_SSI0_WS,
+	GPIO_FN_SIOF_MCLK_PJ,
+	GPIO_FN_HAC_RES,
+	GPIO_FN_SIOF_SCK_PJ,
+	GPIO_FN_HAC0_BITCLK,
+	GPIO_FN_SSI0_CLK,
+	GPIO_FN_HAC1_BITCLK,
+	GPIO_FN_SSI1_CLK,
+	GPIO_FN_TCLK,
+	GPIO_FN_IOIS16,
+	GPIO_FN_STATUS0,
+	GPIO_FN_DRAK0_PK3,
+	GPIO_FN_STATUS1,
+	GPIO_FN_DRAK1_PK2,
+	GPIO_FN_DACK2,
+	GPIO_FN_SCIF2_TXD,
+	GPIO_FN_MMCCMD,
+	GPIO_FN_SIOF_TXD_PK,
+	GPIO_FN_DACK3,
+	GPIO_FN_SCIF2_SCK,
+	GPIO_FN_MMCDAT,
+	GPIO_FN_SIOF_SCK_PK,
+	GPIO_FN_DREQ0,
+	GPIO_FN_DREQ1,
+	GPIO_FN_DRAK0_PK1,
+	GPIO_FN_DRAK1_PK0,
+	GPIO_FN_DREQ2,
+	GPIO_FN_INTB,
+	GPIO_FN_DREQ3,
+	GPIO_FN_INTC,
+	GPIO_FN_DRAK2,
+	GPIO_FN_CE2A,
+	GPIO_FN_IRL4,
+	GPIO_FN_FD4,
+	GPIO_FN_IRL5,
+	GPIO_FN_FD5,
+	GPIO_FN_IRL6,
+	GPIO_FN_FD6,
+	GPIO_FN_IRL7,
+	GPIO_FN_FD7,
+	GPIO_FN_DRAK3,
+	GPIO_FN_CE2B,
+	GPIO_FN_BREQ_BSACK,
+	GPIO_FN_BACK_BSREQ,
+	GPIO_FN_SCIF5_RXD,
+	GPIO_FN_HAC1_SDIN,
+	GPIO_FN_SSI1_SCK,
+	GPIO_FN_SCIF5_SCK,
+	GPIO_FN_HAC1_SDOUT,
+	GPIO_FN_SSI1_SDATA,
+	GPIO_FN_SCIF3_TXD,
+	GPIO_FN_FCLE,
+	GPIO_FN_SCIF3_RXD,
+	GPIO_FN_FALE,
+	GPIO_FN_SCIF3_SCK,
+	GPIO_FN_FD0,
+	GPIO_FN_SCIF4_TXD,
+	GPIO_FN_FD1,
+	GPIO_FN_SCIF4_RXD,
+	GPIO_FN_FD2,
+	GPIO_FN_SCIF4_SCK,
+	GPIO_FN_FD3,
+	GPIO_FN_DEVSEL_DCLKOUT,
+	GPIO_FN_STOP_CDE,
+	GPIO_FN_LOCK_ODDF,
+	GPIO_FN_TRDY_DISPL,
+	GPIO_FN_IRDY_HSYNC,
+	GPIO_FN_PCIFRAME_VSYNC,
+	GPIO_FN_INTA,
+	GPIO_FN_GNT0_GNTIN,
+	GPIO_FN_REQ0_REQOUT,
+	GPIO_FN_PERR,
+	GPIO_FN_SERR,
+	GPIO_FN_WE7_CBE3,
+	GPIO_FN_WE6_CBE2,
+	GPIO_FN_WE5_CBE1,
+	GPIO_FN_WE4_CBE0,
+	GPIO_FN_SCIF2_RXD,
+	GPIO_FN_SIOF_RXD,
+	GPIO_FN_MRESETOUT,
+	GPIO_FN_IRQOUT,
+};
+
+#endif /* __ASM_SH7785_H__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7786.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7786.h
new file mode 100644
index 0000000..0df09e6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sh7786.h
@@ -0,0 +1,134 @@
+/*
+ * SH7786 Pinmux
+ *
+ * Copyright (C) 2008, 2009  Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ *  Based on sh7785.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __CPU_SH7786_H__
+#define __CPU_SH7786_H__
+
+enum {
+	/* PA */
+	GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
+	GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
+
+	/* PB */
+	GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
+	GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
+
+	/* PC */
+	GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
+	GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
+
+	/* PD */
+	GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
+	GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
+
+	/* PE */
+	GPIO_PE7, GPIO_PE6,
+
+	/* PF */
+	GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
+	GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
+
+	/* PG */
+	GPIO_PG7, GPIO_PG6, GPIO_PG5,
+
+	/* PH */
+	GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4,
+	GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
+
+	/* PJ */
+	GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
+	GPIO_PJ3, GPIO_PJ2, GPIO_PJ1,
+
+	/* DU */
+	GPIO_FN_DCLKIN, GPIO_FN_DCLKOUT, GPIO_FN_ODDF,
+	GPIO_FN_VSYNC, GPIO_FN_HSYNC, GPIO_FN_CDE, GPIO_FN_DISP,
+	GPIO_FN_DR0, GPIO_FN_DG0, GPIO_FN_DB0,
+	GPIO_FN_DR1, GPIO_FN_DG1, GPIO_FN_DB1,
+	GPIO_FN_DR2, GPIO_FN_DG2, GPIO_FN_DB2,
+	GPIO_FN_DR3, GPIO_FN_DG3, GPIO_FN_DB3,
+	GPIO_FN_DR4, GPIO_FN_DG4, GPIO_FN_DB4,
+	GPIO_FN_DR5, GPIO_FN_DG5, GPIO_FN_DB5,
+
+	/* Eth */
+	GPIO_FN_ETH_MAGIC, GPIO_FN_ETH_LINK, GPIO_FN_ETH_TX_ER,
+	GPIO_FN_ETH_TX_EN, GPIO_FN_ETH_MDIO, GPIO_FN_ETH_RX_CLK,
+	GPIO_FN_ETH_MDC, GPIO_FN_ETH_COL, GPIO_FN_ETH_TX_CLK,
+	GPIO_FN_ETH_CRS, GPIO_FN_ETH_RX_DV, GPIO_FN_ETH_RX_ER,
+	GPIO_FN_ETH_TXD3, GPIO_FN_ETH_TXD2, GPIO_FN_ETH_TXD1, GPIO_FN_ETH_TXD0,
+	GPIO_FN_ETH_RXD3, GPIO_FN_ETH_RXD2, GPIO_FN_ETH_RXD1, GPIO_FN_ETH_RXD0,
+
+	/* HSPI */
+	GPIO_FN_HSPI_CLK, GPIO_FN_HSPI_CS, GPIO_FN_HSPI_RX, GPIO_FN_HSPI_TX,
+
+	/* SCIF0 */
+	GPIO_FN_SCIF0_CTS, GPIO_FN_SCIF0_RTS, GPIO_FN_SCIF0_SCK,
+	GPIO_FN_SCIF0_RXD, GPIO_FN_SCIF0_TXD,
+
+	/* SCIF1 */
+	GPIO_FN_SCIF1_SCK, GPIO_FN_SCIF1_RXD, GPIO_FN_SCIF1_TXD,
+
+	/* SCIF3 */
+	GPIO_FN_SCIF3_SCK, GPIO_FN_SCIF3_RXD, GPIO_FN_SCIF3_TXD,
+
+	/* SCIF4 */
+	GPIO_FN_SCIF4_SCK, GPIO_FN_SCIF4_RXD, GPIO_FN_SCIF4_TXD,
+
+	/* SCIF5 */
+	GPIO_FN_SCIF5_SCK, GPIO_FN_SCIF5_RXD, GPIO_FN_SCIF5_TXD,
+
+	/* LBSC */
+	GPIO_FN_BREQ, GPIO_FN_IOIS16, GPIO_FN_CE2B, GPIO_FN_CE2A, GPIO_FN_BACK,
+
+	/* FLCTL */
+	GPIO_FN_FALE, GPIO_FN_FRB, GPIO_FN_FSTATUS,
+	GPIO_FN_FSE, GPIO_FN_FCLE,
+
+	/* DMAC */
+	GPIO_FN_DACK0, GPIO_FN_DREQ0, GPIO_FN_DRAK0,
+	GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DRAK1,
+	GPIO_FN_DACK2, GPIO_FN_DREQ2, GPIO_FN_DRAK2,
+	GPIO_FN_DACK3, GPIO_FN_DREQ3, GPIO_FN_DRAK3,
+
+	/* USB */
+	GPIO_FN_USB_OVC0, GPIO_FN_USB_PENC0,
+	GPIO_FN_USB_OVC1, GPIO_FN_USB_PENC1,
+
+	/* HAC */
+	GPIO_FN_HAC_RES,
+	GPIO_FN_HAC0_SDOUT, GPIO_FN_HAC0_SDIN,
+	GPIO_FN_HAC0_SYNC, GPIO_FN_HAC0_BITCLK,
+	GPIO_FN_HAC1_SDOUT, GPIO_FN_HAC1_SDIN,
+	GPIO_FN_HAC1_SYNC, GPIO_FN_HAC1_BITCLK,
+
+	/* SSI */
+	GPIO_FN_SSI0_SDATA, GPIO_FN_SSI0_SCK, GPIO_FN_SSI0_WS, GPIO_FN_SSI0_CLK,
+	GPIO_FN_SSI1_SDATA, GPIO_FN_SSI1_SCK, GPIO_FN_SSI1_WS, GPIO_FN_SSI1_CLK,
+	GPIO_FN_SSI2_SDATA, GPIO_FN_SSI2_SCK, GPIO_FN_SSI2_WS,
+	GPIO_FN_SSI3_SDATA, GPIO_FN_SSI3_SCK, GPIO_FN_SSI3_WS,
+
+	/* SDIF1 */
+	GPIO_FN_SDIF1CMD, GPIO_FN_SDIF1CD, GPIO_FN_SDIF1WP, GPIO_FN_SDIF1CLK,
+	GPIO_FN_SDIF1D3, GPIO_FN_SDIF1D2, GPIO_FN_SDIF1D1, GPIO_FN_SDIF1D0,
+
+	/* SDIF0 */
+	GPIO_FN_SDIF0CMD, GPIO_FN_SDIF0CD, GPIO_FN_SDIF0WP, GPIO_FN_SDIF0CLK,
+	GPIO_FN_SDIF0D3, GPIO_FN_SDIF0D2, GPIO_FN_SDIF0D1, GPIO_FN_SDIF0D0,
+
+	/* TMU */
+	GPIO_FN_TCLK,
+
+	/* INTC */
+	GPIO_FN_IRL7, GPIO_FN_IRL6, GPIO_FN_IRL5, GPIO_FN_IRL4,
+};
+
+#endif /* __CPU_SH7786_H__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/shx3.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/shx3.h
new file mode 100644
index 0000000..f356810
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/shx3.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __CPU_SHX3_H
+#define __CPU_SHX3_H
+
+enum {
+	/* PA */
+	GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
+	GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
+
+	/* PB */
+	GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
+	GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
+
+	/* PC */
+	GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
+	GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
+
+	/* PD */
+	GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
+	GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
+
+	/* PE */
+	GPIO_PE7, GPIO_PE6, GPIO_PE5, GPIO_PE4,
+	GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
+
+	/* PF */
+	GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
+	GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
+
+	/* PG */
+	GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
+	GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
+
+	/* PH */
+	GPIO_PH5, GPIO_PH4,
+	GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
+
+	/* SCIF */
+	GPIO_FN_SCK3, GPIO_FN_TXD3, GPIO_FN_RXD3,
+	GPIO_FN_SCK2, GPIO_FN_TXD2, GPIO_FN_RXD2,
+	GPIO_FN_SCK1, GPIO_FN_TXD1, GPIO_FN_RXD1,
+	GPIO_FN_SCK0, GPIO_FN_TXD0, GPIO_FN_RXD0,
+
+	/* LBSC */
+	GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
+	GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
+	GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
+	GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
+	GPIO_FN_WE3, GPIO_FN_WE2, GPIO_FN_CS6, GPIO_FN_CS5,
+	GPIO_FN_CS4, GPIO_FN_CLKOUTENB, GPIO_FN_BREQ,
+	GPIO_FN_IOIS16, GPIO_FN_CE2B, GPIO_FN_CE2A, GPIO_FN_BACK,
+
+	/* DMAC */
+	GPIO_FN_DACK0, GPIO_FN_DREQ0, GPIO_FN_DRAK0,
+	GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DRAK1,
+	GPIO_FN_DACK2, GPIO_FN_DREQ2, GPIO_FN_DRAK2,
+	GPIO_FN_DACK3, GPIO_FN_DREQ3, GPIO_FN_DRAK3,
+
+	/* INTC */
+	GPIO_FN_IRQ3, GPIO_FN_IRQ2, GPIO_FN_IRQ1, GPIO_FN_IRQ0,
+	GPIO_FN_IRL3, GPIO_FN_IRL2, GPIO_FN_IRL1, GPIO_FN_IRL0,
+	GPIO_FN_IRQOUT, GPIO_FN_STATUS1, GPIO_FN_STATUS0,
+};
+
+#endif /* __CPU_SHX3_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sigcontext.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sigcontext.h
new file mode 100644
index 0000000..2cc5f55
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sigcontext.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_CPU_SH4_SIGCONTEXT_H
+#define __ASM_CPU_SH4_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long	oldmask;
+
+	/* CPU registers */
+	unsigned long sc_regs[16];
+	unsigned long sc_pc;
+	unsigned long sc_pr;
+	unsigned long sc_sr;
+	unsigned long sc_gbr;
+	unsigned long sc_mach;
+	unsigned long sc_macl;
+
+	/* FPU registers */
+	unsigned long sc_fpregs[16];
+	unsigned long sc_xfpregs[16];
+	unsigned int sc_fpscr;
+	unsigned int sc_fpul;
+	unsigned int sc_ownedfp;
+};
+
+#endif /* __ASM_CPU_SH4_SIGCONTEXT_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sq.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sq.h
new file mode 100644
index 0000000..74716ba
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/sq.h
@@ -0,0 +1,36 @@
+/*
+ * include/asm-sh/cpu-sh4/sq.h
+ *
+ * Copyright (C) 2001, 2002, 2003  Paul Mundt
+ * Copyright (C) 2001, 2002  M. R. Brown
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_SQ_H
+#define __ASM_CPU_SH4_SQ_H
+
+#include <asm/addrspace.h>
+#include <asm/page.h>
+
+/*
+ * Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be
+ * mapped to any physical address space. Since data is written (and aligned)
+ * to 32-byte boundaries, we need to be sure that all allocations are aligned.
+ */
+#define SQ_SIZE                 32
+#define SQ_ALIGN_MASK           (~(SQ_SIZE - 1))
+#define SQ_ALIGN(addr)          (((addr)+SQ_SIZE-1) & SQ_ALIGN_MASK)
+
+#define SQ_QACR0		(P4SEG_REG_BASE  + 0x38)
+#define SQ_QACR1		(P4SEG_REG_BASE  + 0x3c)
+#define SQ_ADDRMAX              (P4SEG_STORE_QUE + 0x04000000)
+
+/* arch/sh/kernel/cpu/sh4/sq.c */
+unsigned long sq_remap(unsigned long phys, unsigned int size,
+		       const char *name, pgprot_t prot);
+void sq_unmap(unsigned long vaddr);
+void sq_flush_range(unsigned long start, unsigned int len);
+
+#endif /* __ASM_CPU_SH4_SQ_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/watchdog.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/watchdog.h
new file mode 100644
index 0000000..7f62b93
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4/cpu/watchdog.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-sh/cpu-sh4/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ * Copyright (C) 2009 Siemens AG
+ * Copyright (C) 2009 Sitdikov Valentin
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_WATCHDOG_H
+#define __ASM_CPU_SH4_WATCHDOG_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7785) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+/* Prefix definition */
+#define WTBST_HIGH	0x55
+/* Register definitions */
+#define WTCNT_R		0xffcc0010 /*WDTCNT*/
+#define WTCSR		0xffcc0004 /*WDTCSR*/
+#define WTCNT		0xffcc0000 /*WDTST*/
+#define WTST		WTCNT
+#define WTBST		0xffcc0008 /*WDTBST*/
+/* Register definitions */
+#elif	defined(CONFIG_CPU_SUBTYPE_SH7722) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define WTCNT		0xa4520000
+#define WTCSR		0xa4520004
+#else
+/* Register definitions */
+#define WTCNT		0xffc00008
+#define WTCSR		0xffc0000c
+#endif
+
+/* Bit definitions */
+#define WTCSR_TME	0x80
+#define WTCSR_WT	0x40
+#define WTCSR_RSTS	0x20
+#define WTCSR_WOVF	0x10
+#define WTCSR_IOVF	0x08
+
+#endif /* __ASM_CPU_SH4_WATCHDOG_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4a/cpu/dma.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4a/cpu/dma.h
new file mode 100644
index 0000000..bdbbba8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4a/cpu/dma.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H
+#define __ASM_SH_CPU_SH4_DMA_SH7780_H
+
+#include <linux/sh_intc.h>
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7343) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7730)
+#define DMTE0_IRQ	evt2irq(0x800)
+#define DMTE4_IRQ	evt2irq(0xb80)
+#define DMAE0_IRQ	evt2irq(0xbc0)	/* DMA Error IRQ*/
+#define SH_DMAC_BASE0	0xFE008020
+#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
+#define DMTE0_IRQ	evt2irq(0x800)
+#define DMTE4_IRQ	evt2irq(0xb80)
+#define DMAE0_IRQ	evt2irq(0xbc0)	/* DMA Error IRQ*/
+#define SH_DMAC_BASE0	0xFE008020
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+#define DMTE0_IRQ	evt2irq(0x640)
+#define DMTE4_IRQ	evt2irq(0x780)
+#define DMAE0_IRQ	evt2irq(0x6c0)
+#define SH_DMAC_BASE0	0xFF608020
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#define DMTE0_IRQ	evt2irq(0x800)	/* DMAC0A*/
+#define DMTE4_IRQ	evt2irq(0xb80)	/* DMAC0B */
+#define DMTE6_IRQ	evt2irq(0x700)
+#define DMTE8_IRQ	evt2irq(0x740)	/* DMAC1A */
+#define DMTE9_IRQ	evt2irq(0x760)
+#define DMTE10_IRQ	evt2irq(0xb00)	/* DMAC1B */
+#define DMTE11_IRQ	evt2irq(0xb20)
+#define DMAE0_IRQ	evt2irq(0xbc0)	/* DMA Error IRQ*/
+#define DMAE1_IRQ	evt2irq(0xb40)	/* DMA Error IRQ*/
+#define SH_DMAC_BASE0	0xFE008020
+#define SH_DMAC_BASE1	0xFDC08020
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define DMTE0_IRQ	evt2irq(0x800)	/* DMAC0A*/
+#define DMTE4_IRQ	evt2irq(0xb80)	/* DMAC0B */
+#define DMTE6_IRQ	evt2irq(0x700)
+#define DMTE8_IRQ	evt2irq(0x740)	/* DMAC1A */
+#define DMTE9_IRQ	evt2irq(0x760)
+#define DMTE10_IRQ	evt2irq(0xb00)	/* DMAC1B */
+#define DMTE11_IRQ	evt2irq(0xb20)
+#define DMAE0_IRQ	evt2irq(0xbc0)	/* DMA Error IRQ*/
+#define DMAE1_IRQ	evt2irq(0xb40)	/* DMA Error IRQ*/
+#define SH_DMAC_BASE0	0xFE008020
+#define SH_DMAC_BASE1	0xFDC08020
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define DMTE0_IRQ	evt2irq(0x640)
+#define DMTE4_IRQ	evt2irq(0x780)
+#define DMTE6_IRQ	evt2irq(0x7c0)
+#define DMTE8_IRQ	evt2irq(0xd80)
+#define DMTE9_IRQ	evt2irq(0xda0)
+#define DMTE10_IRQ	evt2irq(0xdc0)
+#define DMTE11_IRQ	evt2irq(0xde0)
+#define DMAE0_IRQ	evt2irq(0x6c0)	/* DMA Error IRQ */
+#define SH_DMAC_BASE0	0xFC808020
+#define SH_DMAC_BASE1	0xFC818020
+#else /* SH7785 */
+#define DMTE0_IRQ	evt2irq(0x620)
+#define DMTE4_IRQ	evt2irq(0x6a0)
+#define DMTE6_IRQ	evt2irq(0x880)
+#define DMTE8_IRQ	evt2irq(0x8c0)
+#define DMTE9_IRQ	evt2irq(0x8e0)
+#define DMTE10_IRQ	evt2irq(0x900)
+#define DMTE11_IRQ	evt2irq(0x920)
+#define DMAE0_IRQ	evt2irq(0x6e0)	/* DMA Error IRQ0 */
+#define DMAE1_IRQ	evt2irq(0x940)	/* DMA Error IRQ1 */
+#define SH_DMAC_BASE0	0xFC808020
+#define SH_DMAC_BASE1	0xFCC08020
+#endif
+
+#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4a/cpu/serial.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4a/cpu/serial.h
new file mode 100644
index 0000000..fc206c0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh4a/cpu/serial.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __CPU_SH4A_SERIAL_H
+#define __CPU_SH4A_SERIAL_H
+
+/* arch/sh/kernel/cpu/sh4a/serial-sh7722.c */
+extern struct plat_sci_port_ops sh7722_sci_port_ops;
+
+#endif /* __CPU_SH4A_SERIAL_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/addrspace.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/addrspace.h
new file mode 100644
index 0000000..6dd1e72
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/addrspace.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CPU_SH5_ADDRSPACE_H
+#define __ASM_SH_CPU_SH5_ADDRSPACE_H
+
+#define	PHYS_PERIPHERAL_BLOCK	0x09000000
+#define PHYS_DMAC_BLOCK		0x0e000000
+#define PHYS_PCI_BLOCK		0x60000000
+#define PHYS_EMI_BLOCK		0xff000000
+
+/* No segmentation.. */
+
+#endif /* __ASM_SH_CPU_SH5_ADDRSPACE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/cache.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/cache.h
new file mode 100644
index 0000000..ed050ab
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/cache.h
@@ -0,0 +1,97 @@
+#ifndef __ASM_SH_CPU_SH5_CACHE_H
+#define __ASM_SH_CPU_SH5_CACHE_H
+
+/*
+ * include/asm-sh/cpu-sh5/cache.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#define L1_CACHE_SHIFT		5
+
+/* Valid and Dirty bits */
+#define SH_CACHE_VALID		(1LL<<0)
+#define SH_CACHE_UPDATED	(1LL<<57)
+
+/* Unimplemented compat bits.. */
+#define SH_CACHE_COMBINED	0
+#define SH_CACHE_ASSOC		0
+
+/* Cache flags */
+#define SH_CACHE_MODE_WT	(1LL<<0)
+#define SH_CACHE_MODE_WB	(1LL<<1)
+
+/*
+ * Control Registers.
+ */
+#define ICCR_BASE	0x01600000	/* Instruction Cache Control Register */
+#define ICCR_REG0	0		/* Register 0 offset */
+#define ICCR_REG1	1		/* Register 1 offset */
+#define ICCR0		ICCR_BASE+ICCR_REG0
+#define ICCR1		ICCR_BASE+ICCR_REG1
+
+#define ICCR0_OFF	0x0		/* Set ICACHE off */
+#define ICCR0_ON	0x1		/* Set ICACHE on */
+#define ICCR0_ICI	0x2		/* Invalidate all in IC */
+
+#define ICCR1_NOLOCK	0x0		/* Set No Locking */
+
+#define OCCR_BASE	0x01E00000	/* Operand Cache Control Register */
+#define OCCR_REG0	0		/* Register 0 offset */
+#define OCCR_REG1	1		/* Register 1 offset */
+#define OCCR0		OCCR_BASE+OCCR_REG0
+#define OCCR1		OCCR_BASE+OCCR_REG1
+
+#define OCCR0_OFF	0x0		/* Set OCACHE off */
+#define OCCR0_ON	0x1		/* Set OCACHE on */
+#define OCCR0_OCI	0x2		/* Invalidate all in OC */
+#define OCCR0_WT	0x4		/* Set OCACHE in WT Mode */
+#define OCCR0_WB	0x0		/* Set OCACHE in WB Mode */
+
+#define OCCR1_NOLOCK	0x0		/* Set No Locking */
+
+/*
+ * SH-5
+ * A bit of description here, for neff=32.
+ *
+ *                               |<--- tag  (19 bits) --->|
+ * +-----------------------------+-----------------+------+----------+------+
+ * |                             |                 | ways |set index |offset|
+ * +-----------------------------+-----------------+------+----------+------+
+ *                                ^                 2 bits   8 bits   5 bits
+ *                                +- Bit 31
+ *
+ * Cacheline size is based on offset: 5 bits = 32 bytes per line
+ * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG
+ * have a broader space for registers. These are outlined by
+ * CACHE_?C_*_STEP below.
+ *
+ */
+
+/* Instruction cache */
+#define CACHE_IC_ADDRESS_ARRAY 0x01000000
+
+/* Operand Cache */
+#define CACHE_OC_ADDRESS_ARRAY 0x01800000
+
+/* These declarations relate to cache 'synonyms' in the operand cache.  A
+   'synonym' occurs where effective address bits overlap between those used for
+   indexing the cache sets and those passed to the MMU for translation.  In the
+   case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */
+
+#define CACHE_OC_N_SYNBITS  1               /* Number of synonym bits */
+#define CACHE_OC_SYN_SHIFT  12
+/* Mask to select synonym bit(s) */
+#define CACHE_OC_SYN_MASK   (((1UL<<CACHE_OC_N_SYNBITS)-1)<<CACHE_OC_SYN_SHIFT)
+
+/*
+ * Instruction cache can't be invalidated based on physical addresses.
+ * No Instruction Cache defines required, then.
+ */
+
+#endif /* __ASM_SH_CPU_SH5_CACHE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/irq.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/irq.h
new file mode 100644
index 0000000..0ccf257
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/irq.h
@@ -0,0 +1,116 @@
+#ifndef __ASM_SH_CPU_SH5_IRQ_H
+#define __ASM_SH_CPU_SH5_IRQ_H
+
+/*
+ * include/asm-sh/cpu-sh5/irq.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+
+/*
+ * Encoded IRQs are not considered worth to be supported.
+ * Main reason is that there's no per-encoded-interrupt
+ * enable/disable mechanism (as there was in SH3/4).
+ * An all enabled/all disabled is worth only if there's
+ * a cascaded IC to disable/enable/ack on. Until such
+ * IC is available there's no such support.
+ *
+ * Presumably Encoded IRQs may use extra IRQs beyond 64,
+ * below. Some logic must be added to cope with IRQ_IRL?
+ * in an exclusive way.
+ *
+ * Priorities are set at Platform level, when IRQ_IRL0-3
+ * are set to 0 Encoding is allowed. Otherwise it's not
+ * allowed.
+ */
+
+/* Independent IRQs */
+#define IRQ_IRL0	0
+#define IRQ_IRL1	1
+#define IRQ_IRL2	2
+#define IRQ_IRL3	3
+
+#define IRQ_INTA	4
+#define IRQ_INTB	5
+#define IRQ_INTC	6
+#define IRQ_INTD	7
+
+#define IRQ_SERR	12
+#define IRQ_ERR		13
+#define IRQ_PWR3	14
+#define IRQ_PWR2	15
+#define IRQ_PWR1	16
+#define IRQ_PWR0	17
+
+#define IRQ_DMTE0	18
+#define IRQ_DMTE1	19
+#define IRQ_DMTE2	20
+#define IRQ_DMTE3	21
+#define IRQ_DAERR	22
+
+#define IRQ_TUNI0	32
+#define IRQ_TUNI1	33
+#define IRQ_TUNI2	34
+#define IRQ_TICPI2	35
+
+#define IRQ_ATI		36
+#define IRQ_PRI		37
+#define IRQ_CUI		38
+
+#define IRQ_ERI		39
+#define IRQ_RXI		40
+#define IRQ_BRI		41
+#define IRQ_TXI		42
+
+#define IRQ_ITI		63
+
+#define NR_INTC_IRQS	64
+
+#ifdef CONFIG_SH_CAYMAN
+#define NR_EXT_IRQS     32
+#define START_EXT_IRQS  64
+
+/* PCI bus 2 uses encoded external interrupts on the Cayman board */
+#define IRQ_P2INTA      (START_EXT_IRQS + (3*8) + 0)
+#define IRQ_P2INTB      (START_EXT_IRQS + (3*8) + 1)
+#define IRQ_P2INTC      (START_EXT_IRQS + (3*8) + 2)
+#define IRQ_P2INTD      (START_EXT_IRQS + (3*8) + 3)
+
+#define I8042_KBD_IRQ	(START_EXT_IRQS + 2)
+#define I8042_AUX_IRQ	(START_EXT_IRQS + 6)
+
+#define IRQ_CFCARD	(START_EXT_IRQS + 7)
+#define IRQ_PCMCIA	(0)
+
+#else
+#define NR_EXT_IRQS	0
+#endif
+
+/* Default IRQs, fixed */
+#define TIMER_IRQ	IRQ_TUNI0
+#define RTC_IRQ		IRQ_CUI
+
+/* Default Priorities, Platform may choose differently */
+#define	NO_PRIORITY	0	/* Disabled */
+#define TIMER_PRIORITY	2
+#define RTC_PRIORITY	TIMER_PRIORITY
+#define SCIF_PRIORITY	3
+#define INTD_PRIORITY	3
+#define	IRL3_PRIORITY	4
+#define INTC_PRIORITY	6
+#define	IRL2_PRIORITY	7
+#define INTB_PRIORITY	9
+#define	IRL1_PRIORITY	10
+#define INTA_PRIORITY	12
+#define	IRL0_PRIORITY	13
+#define TOP_PRIORITY	15
+
+extern int intc_evt_to_irq[(0xE20/0x20)+1];
+extern int platform_int_priority[NR_INTC_IRQS];
+
+#endif /* __ASM_SH_CPU_SH5_IRQ_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/mmu_context.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/mmu_context.h
new file mode 100644
index 0000000..23c53be
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/mmu_context.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CPU_SH5_MMU_CONTEXT_H
+#define __ASM_SH_CPU_SH5_MMU_CONTEXT_H
+
+/* Common defines */
+#define TLB_STEP	0x00000010
+#define TLB_PTEH	0x00000000
+#define TLB_PTEL	0x00000008
+
+/* PTEH defines */
+#define PTEH_ASID_SHIFT	2
+#define PTEH_VALID	0x0000000000000001
+#define PTEH_SHARED	0x0000000000000002
+#define PTEH_MATCH_ASID	0x00000000000003ff
+
+#ifndef __ASSEMBLY__
+/* This has to be a common function because the next location to fill
+ * information is shared. */
+extern void __do_tlb_refill(unsigned long address, unsigned long long is_text_not_data, pte_t *pte);
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_SH_CPU_SH5_MMU_CONTEXT_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/registers.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/registers.h
new file mode 100644
index 0000000..6664ea6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/registers.h
@@ -0,0 +1,106 @@
+#ifndef __ASM_SH_CPU_SH5_REGISTERS_H
+#define __ASM_SH_CPU_SH5_REGISTERS_H
+
+/*
+ * include/asm-sh/cpu-sh5/registers.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifdef __ASSEMBLY__
+/* =====================================================================
+**
+** Section 1: acts on assembly sources pre-processed by GPP ( <source.S>).
+**	      Assigns symbolic names to control & target registers.
+*/
+
+/*
+ * Define some useful aliases for control registers.
+ */
+#define SR	cr0
+#define SSR	cr1
+#define PSSR	cr2
+			/* cr3 UNDEFINED */
+#define INTEVT	cr4
+#define EXPEVT	cr5
+#define PEXPEVT	cr6
+#define TRA	cr7
+#define SPC	cr8
+#define PSPC	cr9
+#define RESVEC	cr10
+#define VBR	cr11
+			/* cr12 UNDEFINED */
+#define TEA	cr13
+			/* cr14-cr15 UNDEFINED */
+#define DCR	cr16
+#define KCR0	cr17
+#define KCR1	cr18
+			/* cr19-cr31 UNDEFINED */
+			/* cr32-cr61 RESERVED */
+#define CTC	cr62
+#define USR	cr63
+
+/*
+ * ABI dependent registers (general purpose set)
+ */
+#define RET	r2
+#define ARG1	r2
+#define ARG2	r3
+#define ARG3	r4
+#define ARG4	r5
+#define ARG5	r6
+#define ARG6	r7
+#define SP	r15
+#define LINK	r18
+#define ZERO	r63
+
+/*
+ * Status register defines: used only by assembly sources (and
+ * 			    syntax independednt)
+ */
+#define SR_RESET_VAL	0x0000000050008000
+#define SR_HARMLESS	0x00000000500080f0	/* Write ignores for most */
+#define SR_ENABLE_FPU	0xffffffffffff7fff	/* AND with this */
+
+#if defined (CONFIG_SH64_SR_WATCH)
+#define SR_ENABLE_MMU	0x0000000084000000	/* OR with this */
+#else
+#define SR_ENABLE_MMU	0x0000000080000000	/* OR with this */
+#endif
+
+#define SR_UNBLOCK_EXC	0xffffffffefffffff	/* AND with this */
+#define SR_BLOCK_EXC	0x0000000010000000	/* OR with this */
+
+#else	/* Not __ASSEMBLY__ syntax */
+
+/*
+** Stringify reg. name
+*/
+#define __str(x)  #x
+
+/* Stringify control register names for use in inline assembly */
+#define __SR __str(SR)
+#define __SSR __str(SSR)
+#define __PSSR __str(PSSR)
+#define __INTEVT __str(INTEVT)
+#define __EXPEVT __str(EXPEVT)
+#define __PEXPEVT __str(PEXPEVT)
+#define __TRA __str(TRA)
+#define __SPC __str(SPC)
+#define __PSPC __str(PSPC)
+#define __RESVEC __str(RESVEC)
+#define __VBR __str(VBR)
+#define __TEA __str(TEA)
+#define __DCR __str(DCR)
+#define __KCR0 __str(KCR0)
+#define __KCR1 __str(KCR1)
+#define __CTC __str(CTC)
+#define __USR __str(USR)
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_CPU_SH5_REGISTERS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/rtc.h b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/rtc.h
new file mode 100644
index 0000000..d7e25d4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/cpu-sh5/cpu/rtc.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_CPU_SH5_RTC_H
+#define __ASM_SH_CPU_SH5_RTC_H
+
+#define rtc_reg_size		sizeof(u32)
+#define RTC_BIT_INVERTED	0	/* The SH-5 RTC is surprisingly sane! */
+#define RTC_DEF_CAPABILITIES	RTC_CAP_4_DIGIT_YEAR
+
+#endif /* __ASM_SH_CPU_SH5_RTC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/highlander.h b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/highlander.h
new file mode 100644
index 0000000..66d3e40
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/highlander.h
@@ -0,0 +1,208 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_RENESAS_R7780RP_H
+#define __ASM_SH_RENESAS_R7780RP_H
+
+/* Box specific addresses.  */
+#define PA_NORFLASH_ADDR	0x00000000
+#define PA_NORFLASH_SIZE	0x04000000
+
+#if defined(CONFIG_SH_R7780MP)
+#define PA_BCR          0xa4000000      /* FPGA */
+#define PA_SDPOW	(-1)
+
+#define PA_IRLMSK       (PA_BCR+0x0000) /* Interrupt Mask control */
+#define PA_IRLMON       (PA_BCR+0x0002) /* Interrupt Status control */
+#define PA_IRLPRI1      (PA_BCR+0x0004) /* Interrupt Priorty 1 */
+#define PA_IRLPRI2      (PA_BCR+0x0006) /* Interrupt Priorty 2 */
+#define PA_IRLPRI3      (PA_BCR+0x0008) /* Interrupt Priorty 3 */
+#define PA_IRLPRI4      (PA_BCR+0x000a) /* Interrupt Priorty 4 */
+#define PA_RSTCTL       (PA_BCR+0x000c) /* Reset Control */
+#define PA_PCIBD        (PA_BCR+0x000e) /* PCI Board detect control */
+#define PA_PCICD        (PA_BCR+0x0010) /* PCI Conector detect control */
+#define PA_EXTGIO       (PA_BCR+0x0016) /* Extension GPIO Control */
+#define PA_IVDRMON      (PA_BCR+0x0018) /* iVDR Moniter control */
+#define PA_IVDRCTL      (PA_BCR+0x001a) /* iVDR control */
+#define PA_OBLED        (PA_BCR+0x001c) /* On Board LED control */
+#define PA_OBSW         (PA_BCR+0x001e) /* On Board Switch control */
+#define PA_AUDIOSEL     (PA_BCR+0x0020) /* Sound Interface Select control */
+#define PA_EXTPLR       (PA_BCR+0x001e) /* Extension Pin Polarity control */
+#define PA_TPCTL        (PA_BCR+0x0100) /* Touch Panel Access control */
+#define PA_TPDCKCTL     (PA_BCR+0x0102) /* Touch Panel Access data control */
+#define PA_TPCTLCLR     (PA_BCR+0x0104) /* Touch Panel Access control */
+#define PA_TPXPOS       (PA_BCR+0x0106) /* Touch Panel X position control */
+#define PA_TPYPOS       (PA_BCR+0x0108) /* Touch Panel Y position control */
+#define PA_DBSW         (PA_BCR+0x0200) /* Debug Board Switch control */
+#define PA_CFCTL        (PA_BCR+0x0300) /* CF Timing control */
+#define PA_CFPOW        (PA_BCR+0x0302) /* CF Power control */
+#define PA_CFCDINTCLR   (PA_BCR+0x0304) /* CF Insert Interrupt clear */
+#define PA_SCSMR0       (PA_BCR+0x0400) /* SCIF0 Serial mode control */
+#define PA_SCBRR0       (PA_BCR+0x0404) /* SCIF0 Bit rate control */
+#define PA_SCSCR0       (PA_BCR+0x0408) /* SCIF0 Serial control */
+#define PA_SCFTDR0      (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
+#define PA_SCFSR0       (PA_BCR+0x0410) /* SCIF0 Serial status control */
+#define PA_SCFRDR0      (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
+#define PA_SCFCR0       (PA_BCR+0x0418) /* SCIF0 FIFO control */
+#define PA_SCTFDR0      (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
+#define PA_SCRFDR0      (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
+#define PA_SCSPTR0      (PA_BCR+0x0424) /* SCIF0 Serial Port control */
+#define PA_SCLSR0       (PA_BCR+0x0428) /* SCIF0 Line Status control */
+#define PA_SCRER0       (PA_BCR+0x042c) /* SCIF0 Serial Error control */
+#define PA_SCSMR1       (PA_BCR+0x0500) /* SCIF1 Serial mode control */
+#define PA_SCBRR1       (PA_BCR+0x0504) /* SCIF1 Bit rate control */
+#define PA_SCSCR1       (PA_BCR+0x0508) /* SCIF1 Serial control */
+#define PA_SCFTDR1      (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
+#define PA_SCFSR1       (PA_BCR+0x0510) /* SCIF1 Serial status control */
+#define PA_SCFRDR1      (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
+#define PA_SCFCR1       (PA_BCR+0x0518) /* SCIF1 FIFO control */
+#define PA_SCTFDR1      (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
+#define PA_SCRFDR1      (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
+#define PA_SCSPTR1      (PA_BCR+0x0524) /* SCIF1 Serial Port control */
+#define PA_SCLSR1       (PA_BCR+0x0528) /* SCIF1 Line Status control */
+#define PA_SCRER1       (PA_BCR+0x052c) /* SCIF1 Serial Error control */
+#define PA_SMCR         (PA_BCR+0x0600) /* 2-wire Serial control */
+#define PA_SMSMADR      (PA_BCR+0x0602) /* 2-wire Serial Slave control */
+#define PA_SMMR         (PA_BCR+0x0604) /* 2-wire Serial Mode control */
+#define PA_SMSADR1      (PA_BCR+0x0606) /* 2-wire Serial Address1 control */
+#define PA_SMTRDR1      (PA_BCR+0x0646) /* 2-wire Serial Data1 control */
+#define PA_VERREG       (PA_BCR+0x0700) /* FPGA Version Register */
+#define PA_POFF         (PA_BCR+0x0800) /* System Power Off control */
+#define PA_PMR          (PA_BCR+0x0900) /*  */
+
+#define IRLCNTR1        (PA_BCR + 0)    /* Interrupt Control Register1 */
+#define IVDR_CK_ON	8		/* iVDR Clock ON */
+
+#elif defined(CONFIG_SH_R7780RP)
+#define PA_POFF		(-1)
+
+#define PA_BCR		0xa5000000	/* FPGA */
+#define	PA_IRLMSK	(PA_BCR+0x0000)	/* Interrupt Mask control */
+#define PA_IRLMON	(PA_BCR+0x0002)	/* Interrupt Status control */
+#define	PA_SDPOW	(PA_BCR+0x0004)	/* SD Power control */
+#define	PA_RSTCTL	(PA_BCR+0x0006)	/* Device Reset control */
+#define	PA_PCIBD	(PA_BCR+0x0008)	/* PCI Board detect control */
+#define	PA_PCICD	(PA_BCR+0x000a)	/* PCI Conector detect control */
+#define	PA_ZIGIO1	(PA_BCR+0x000c)	/* Zigbee IO control 1 */
+#define	PA_ZIGIO2	(PA_BCR+0x000e)	/* Zigbee IO control 2 */
+#define	PA_ZIGIO3	(PA_BCR+0x0010)	/* Zigbee IO control 3 */
+#define	PA_ZIGIO4	(PA_BCR+0x0012)	/* Zigbee IO control 4 */
+#define	PA_IVDRMON	(PA_BCR+0x0014)	/* iVDR Moniter control */
+#define	PA_IVDRCTL	(PA_BCR+0x0016)	/* iVDR control */
+#define PA_OBLED	(PA_BCR+0x0018)	/* On Board LED control */
+#define PA_OBSW		(PA_BCR+0x001a)	/* On Board Switch control */
+#define PA_AUDIOSEL	(PA_BCR+0x001c)	/* Sound Interface Select control */
+#define PA_EXTPLR	(PA_BCR+0x001e)	/* Extension Pin Polarity control */
+#define PA_TPCTL	(PA_BCR+0x0100)	/* Touch Panel Access control */
+#define PA_TPDCKCTL	(PA_BCR+0x0102)	/* Touch Panel Access data control */
+#define PA_TPCTLCLR	(PA_BCR+0x0104)	/* Touch Panel Access control */
+#define PA_TPXPOS	(PA_BCR+0x0106)	/* Touch Panel X position control */
+#define PA_TPYPOS	(PA_BCR+0x0108)	/* Touch Panel Y position control */
+#define PA_DBDET	(PA_BCR+0x0200)	/* Debug Board detect control */
+#define PA_DBDISPCTL	(PA_BCR+0x0202)	/* Debug Board Dot timing control */
+#define PA_DBSW		(PA_BCR+0x0204)	/* Debug Board Switch control */
+#define PA_CFCTL	(PA_BCR+0x0300)	/* CF Timing control */
+#define PA_CFPOW	(PA_BCR+0x0302)	/* CF Power control */
+#define PA_CFCDINTCLR	(PA_BCR+0x0304)	/* CF Insert Interrupt clear */
+#define PA_SCSMR	(PA_BCR+0x0400)	/* SCIF Serial mode control */
+#define PA_SCBRR	(PA_BCR+0x0402)	/* SCIF Bit rate control */
+#define PA_SCSCR	(PA_BCR+0x0404)	/* SCIF Serial control */
+#define PA_SCFDTR	(PA_BCR+0x0406)	/* SCIF Send FIFO control */
+#define PA_SCFSR	(PA_BCR+0x0408)	/* SCIF Serial status control */
+#define PA_SCFRDR	(PA_BCR+0x040a)	/* SCIF Receive FIFO control */
+#define PA_SCFCR	(PA_BCR+0x040c)	/* SCIF FIFO control */
+#define PA_SCFDR	(PA_BCR+0x040e)	/* SCIF FIFO data control */
+#define PA_SCLSR	(PA_BCR+0x0412)	/* SCIF Line Status control */
+#define PA_SMCR		(PA_BCR+0x0500)	/* 2-wire Serial control */
+#define PA_SMSMADR	(PA_BCR+0x0502)	/* 2-wire Serial Slave control */
+#define PA_SMMR		(PA_BCR+0x0504)	/* 2-wire Serial Mode control */
+#define PA_SMSADR1	(PA_BCR+0x0506)	/* 2-wire Serial Address1 control */
+#define PA_SMTRDR1	(PA_BCR+0x0546)	/* 2-wire Serial Data1 control */
+#define PA_VERREG	(PA_BCR+0x0600)	/* FPGA Version Register */
+
+#define PA_AX88796L	0xa5800400	/* AX88796L Area */
+#define PA_SC1602BSLB	0xa6000000	/* SC1602BSLB Area */
+#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
+#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
+
+#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
+
+#define IVDR_CK_ON	8		/* iVDR Clock ON */
+
+#elif defined(CONFIG_SH_R7785RP)
+#define PA_BCR		0xa4000000	/* FPGA */
+#define PA_SDPOW	(-1)
+
+#define	PA_PCISCR	(PA_BCR+0x0000)
+#define PA_IRLPRA	(PA_BCR+0x0002)
+#define	PA_IRLPRB	(PA_BCR+0x0004)
+#define	PA_IRLPRC	(PA_BCR+0x0006)
+#define	PA_IRLPRD	(PA_BCR+0x0008)
+#define IRLCNTR1	(PA_BCR+0x0010)
+#define	PA_IRLPRE	(PA_BCR+0x000a)
+#define	PA_IRLPRF	(PA_BCR+0x000c)
+#define	PA_EXIRLCR	(PA_BCR+0x000e)
+#define	PA_IRLMCR1	(PA_BCR+0x0010)
+#define	PA_IRLMCR2	(PA_BCR+0x0012)
+#define	PA_IRLSSR1	(PA_BCR+0x0014)
+#define	PA_IRLSSR2	(PA_BCR+0x0016)
+#define PA_CFTCR	(PA_BCR+0x0100)
+#define PA_CFPCR	(PA_BCR+0x0102)
+#define PA_PCICR	(PA_BCR+0x0110)
+#define PA_IVDRCTL	(PA_BCR+0x0112)
+#define PA_IVDRSR	(PA_BCR+0x0114)
+#define PA_PDRSTCR	(PA_BCR+0x0116)
+#define PA_POFF		(PA_BCR+0x0120)
+#define PA_LCDCR	(PA_BCR+0x0130)
+#define PA_TPCR		(PA_BCR+0x0140)
+#define PA_TPCKCR	(PA_BCR+0x0142)
+#define PA_TPRSTR	(PA_BCR+0x0144)
+#define PA_TPXPDR	(PA_BCR+0x0146)
+#define PA_TPYPDR	(PA_BCR+0x0148)
+#define PA_GPIOPFR	(PA_BCR+0x0150)
+#define PA_GPIODR	(PA_BCR+0x0152)
+#define PA_OBLED	(PA_BCR+0x0154)
+#define PA_SWSR		(PA_BCR+0x0156)
+#define PA_VERREG	(PA_BCR+0x0158)
+#define PA_SMCR		(PA_BCR+0x0200)
+#define PA_SMSMADR	(PA_BCR+0x0202)
+#define PA_SMMR		(PA_BCR+0x0204)
+#define PA_SMSADR1	(PA_BCR+0x0206)
+#define PA_SMSADR32	(PA_BCR+0x0244)
+#define PA_SMTRDR1	(PA_BCR+0x0246)
+#define PA_SMTRDR16	(PA_BCR+0x0264)
+#define PA_CU3MDR	(PA_BCR+0x0300)
+#define PA_CU5MDR	(PA_BCR+0x0302)
+#define PA_MMSR		(PA_BCR+0x0400)
+
+#define IVDR_CK_ON	4		/* iVDR Clock ON */
+#endif
+
+#define HL_FPGA_IRQ_BASE	200
+#define HL_NR_IRL		15
+
+#define IRQ_AX88796		(HL_FPGA_IRQ_BASE + 0)
+#define IRQ_CF			(HL_FPGA_IRQ_BASE + 1)
+#define IRQ_PSW			(HL_FPGA_IRQ_BASE + 2)
+#define IRQ_EXT0		(HL_FPGA_IRQ_BASE + 3)
+#define IRQ_EXT1		(HL_FPGA_IRQ_BASE + 4)
+#define IRQ_EXT2		(HL_FPGA_IRQ_BASE + 5)
+#define IRQ_EXT3		(HL_FPGA_IRQ_BASE + 6)
+#define IRQ_EXT4		(HL_FPGA_IRQ_BASE + 7)
+#define IRQ_EXT5		(HL_FPGA_IRQ_BASE + 8)
+#define IRQ_EXT6		(HL_FPGA_IRQ_BASE + 9)
+#define IRQ_EXT7		(HL_FPGA_IRQ_BASE + 10)
+#define IRQ_SMBUS		(HL_FPGA_IRQ_BASE + 11)
+#define IRQ_TP			(HL_FPGA_IRQ_BASE + 12)
+#define IRQ_RTC			(HL_FPGA_IRQ_BASE + 13)
+#define IRQ_TH_ALERT		(HL_FPGA_IRQ_BASE + 14)
+#define IRQ_SCIF0		(HL_FPGA_IRQ_BASE + 15)
+#define IRQ_SCIF1		(HL_FPGA_IRQ_BASE + 16)
+
+unsigned char *highlander_plat_irq_setup(void);
+
+#ifdef CONFIG_SH_R7785RP
+void highlander_plat_pinmux_setup(void);
+#else
+#define highlander_plat_pinmux_setup()	do { } while (0)
+#endif
+
+#endif  /* __ASM_SH_RENESAS_R7780RP */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/hp6xx.h b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/hp6xx.h
new file mode 100644
index 0000000..6aaaf85
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/hp6xx.h
@@ -0,0 +1,63 @@
+#ifndef __ASM_SH_HP6XX_H
+#define __ASM_SH_HP6XX_H
+
+/*
+ * Copyright (C) 2003, 2004, 2005  Andriy Skulysh
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/sh_intc.h>
+
+#define HP680_BTN_IRQ		evt2irq(0x600)	/* IRQ0_IRQ */
+#define HP680_TS_IRQ		evt2irq(0x660)	/* IRQ3_IRQ */
+#define HP680_HD64461_IRQ	evt2irq(0x680)	/* IRQ4_IRQ */
+
+#define DAC_LCD_BRIGHTNESS	0
+#define DAC_SPEAKER_VOLUME	1
+
+#define PGDR_OPENED		0x01
+#define PGDR_MAIN_BATTERY_OUT	0x04
+#define PGDR_PLAY_BUTTON	0x08
+#define PGDR_REWIND_BUTTON	0x10
+#define PGDR_RECORD_BUTTON	0x20
+
+#define PHDR_TS_PEN_DOWN	0x08
+
+#define PJDR_LED_BLINK		0x02
+
+#define PKDR_LED_GREEN		0x10
+
+/* HP Palmtop 620lx/660lx speaker on/off */
+#define PKDR_SPEAKER		0x20
+
+#define SCPDR_TS_SCAN_ENABLE	0x20
+#define SCPDR_TS_SCAN_Y		0x02
+#define SCPDR_TS_SCAN_X		0x01
+
+#define SCPCR_TS_ENABLE		0x405
+#define SCPCR_TS_MASK		0xc0f
+
+#define ADC_CHANNEL_TS_Y	1
+#define ADC_CHANNEL_TS_X	2
+#define ADC_CHANNEL_BATTERY	3
+#define ADC_CHANNEL_BACKUP	4
+#define ADC_CHANNEL_CHARGE	5
+
+/* HP Jornada 680/690 speaker on/off */
+#define HD64461_GPADR_SPEAKER	0x01
+#define HD64461_GPADR_PCMCIA0	(0x02|0x08)
+
+#define HD64461_GPBDR_LCDOFF	0x01
+#define HD64461_GPBDR_LCD_CONTRAST_MASK	0x78
+#define HD64461_GPBDR_LED_RED	0x80
+
+#include <asm/hd64461.h>
+#include <asm/io.h>
+
+#define PJDR	0xa4000130
+#define PKDR	0xa4000132
+
+#endif /* __ASM_SH_HP6XX_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/lboxre2.h b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/lboxre2.h
new file mode 100644
index 0000000..3a4dcc5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/lboxre2.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_SH_LBOXRE2_H
+#define __ASM_SH_LBOXRE2_H
+
+/*
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * NTT COMWARE L-BOX RE2 support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/sh_intc.h>
+
+#define IRQ_CF1		evt2irq(0x320)	/* CF1 */
+#define IRQ_CF0		evt2irq(0x340)	/* CF0 */
+#define IRQ_INTD	evt2irq(0x360)	/* INTD */
+#define IRQ_ETH1	evt2irq(0x380)	/* Ether1 */
+#define IRQ_ETH0	evt2irq(0x3a0)	/* Ether0 */
+#define IRQ_INTA	evt2irq(0x3c0)	/* INTA */
+
+void init_lboxre2_IRQ(void);
+
+#define __IO_PREFIX	lboxre2
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_LBOXRE2_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/magicpanelr2.h b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/magicpanelr2.h
new file mode 100644
index 0000000..eb0cf20
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/magicpanelr2.h
@@ -0,0 +1,67 @@
+/*
+ *  include/asm-sh/magicpanelr2.h
+ *
+ *  Copyright (C) 2007  Markus Brunner, Mark Jonas
+ *
+ *  I/O addresses and bitmasks for Magic Panel Release 2 board
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_SH_MAGICPANELR2_H
+#define __ASM_SH_MAGICPANELR2_H
+
+#include <linux/gpio.h>
+
+#define __IO_PREFIX mpr2
+#include <asm/io_generic.h>
+
+
+#define SETBITS_OUTB(mask, reg)   __raw_writeb(__raw_readb(reg) | mask, reg)
+#define SETBITS_OUTW(mask, reg)   __raw_writew(__raw_readw(reg) | mask, reg)
+#define SETBITS_OUTL(mask, reg)   __raw_writel(__raw_readl(reg) | mask, reg)
+#define CLRBITS_OUTB(mask, reg)   __raw_writeb(__raw_readb(reg) & ~mask, reg)
+#define CLRBITS_OUTW(mask, reg)   __raw_writew(__raw_readw(reg) & ~mask, reg)
+#define CLRBITS_OUTL(mask, reg)   __raw_writel(__raw_readl(reg) & ~mask, reg)
+
+
+#define PA_LED          PORT_PADR      /* LED */
+
+
+/* BSC */
+#define CMNCR           0xA4FD0000UL
+#define CS0BCR          0xA4FD0004UL
+#define CS2BCR          0xA4FD0008UL
+#define CS3BCR          0xA4FD000CUL
+#define CS4BCR          0xA4FD0010UL
+#define CS5ABCR         0xA4FD0014UL
+#define CS5BBCR         0xA4FD0018UL
+#define CS6ABCR         0xA4FD001CUL
+#define CS6BBCR         0xA4FD0020UL
+#define CS0WCR          0xA4FD0024UL
+#define CS2WCR          0xA4FD0028UL
+#define CS3WCR          0xA4FD002CUL
+#define CS4WCR          0xA4FD0030UL
+#define CS5AWCR         0xA4FD0034UL
+#define CS5BWCR         0xA4FD0038UL
+#define CS6AWCR         0xA4FD003CUL
+#define CS6BWCR         0xA4FD0040UL
+
+
+/* usb */
+
+#define PORT_UTRCTL		0xA405012CUL
+#define PORT_UCLKCR_W		0xA40A0008UL
+
+#define INTC_ICR0		0xA414FEE0UL
+#define INTC_ICR1		0xA4140010UL
+#define INTC_ICR2		0xA4140012UL
+
+/* MTD */
+
+#define MPR2_MTD_BOOTLOADER_SIZE	0x00060000UL
+#define MPR2_MTD_KERNEL_SIZE		0x00200000UL
+
+#endif  /* __ASM_SH_MAGICPANELR2_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/mangle-port.h b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/mangle-port.h
new file mode 100644
index 0000000..4ca1769
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/mangle-port.h
@@ -0,0 +1,49 @@
+/*
+ * SH version cribbed from the MIPS copy:
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __MACH_COMMON_MANGLE_PORT_H
+#define __MACH_COMMON_MANGLE_PORT_H
+
+/*
+ * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
+ * less sane hardware forces software to fiddle with this...
+ *
+ * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
+ * you can't have the numerical value of data and byte addresses within
+ * multibyte quantities both preserved at the same time.  Hence two
+ * variations of functions: non-prefixed ones that preserve the value
+ * and prefixed ones that preserve byte addresses.  The latters are
+ * typically used for moving raw data between a peripheral and memory (cf.
+ * string I/O functions), hence the "__mem_" prefix.
+ */
+#if defined(CONFIG_SWAP_IO_SPACE)
+
+# define ioswabb(x)		(x)
+# define __mem_ioswabb(x)	(x)
+# define ioswabw(x)		le16_to_cpu(x)
+# define __mem_ioswabw(x)	(x)
+# define ioswabl(x)		le32_to_cpu(x)
+# define __mem_ioswabl(x)	(x)
+# define ioswabq(x)		le64_to_cpu(x)
+# define __mem_ioswabq(x)	(x)
+
+#else
+
+# define ioswabb(x)		(x)
+# define __mem_ioswabb(x)	(x)
+# define ioswabw(x)		(x)
+# define __mem_ioswabw(x)	cpu_to_le16(x)
+# define ioswabl(x)		(x)
+# define __mem_ioswabl(x)	cpu_to_le32(x)
+# define ioswabq(x)		(x)
+# define __mem_ioswabq(x)	cpu_to_le32(x)
+
+#endif
+
+#endif /* __MACH_COMMON_MANGLE_PORT_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/microdev.h b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/microdev.h
new file mode 100644
index 0000000..dcb05fa
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/microdev.h
@@ -0,0 +1,71 @@
+/*
+ * linux/include/asm-sh/microdev.h
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ *
+ * Definitions for the SuperH SH4-202 MicroDev board.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+#ifndef __ASM_SH_MICRODEV_H
+#define __ASM_SH_MICRODEV_H
+
+extern void init_microdev_irq(void);
+extern void microdev_print_fpga_intc_status(void);
+
+/*
+ * The following are useful macros for manipulating the interrupt
+ * controller (INTC) on the CPU-board FPGA.  should be noted that there
+ * is an INTC on the FPGA, and a separate INTC on the SH4-202 core -
+ * these are two different things, both of which need to be prorammed to
+ * correctly route - unfortunately, they have the same name and
+ * abbreviations!
+ */
+#define	MICRODEV_FPGA_INTC_BASE		0xa6110000ul				/* INTC base address on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTENB_REG	(MICRODEV_FPGA_INTC_BASE+0ul)		/* Interrupt Enable Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTDSB_REG	(MICRODEV_FPGA_INTC_BASE+8ul)		/* Interrupt Disable Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTC_MASK(n)	(1ul<<(n))				/* Interrupt mask to enable/disable INTC in CPU-board FPGA */
+#define	MICRODEV_FPGA_INTPRI_REG(n)	(MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTPRI_LEVEL(n,x)	((x)<<(((n)%8)*4))			/* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
+#define	MICRODEV_FPGA_INTPRI_MASK(n)	(MICRODEV_FPGA_INTPRI_LEVEL((n),0xful))	/* Interrupt Priority Mask on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTSRC_REG	(MICRODEV_FPGA_INTC_BASE+0x30ul)	/* Interrupt Source Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTREQ_REG	(MICRODEV_FPGA_INTC_BASE+0x38ul)	/* Interrupt Request Register on INTC on CPU-board FPGA */
+
+
+/*
+ * The following are the IRQ numbers for the Linux Kernel for external
+ * interrupts.  i.e. the numbers seen by 'cat /proc/interrupt'.
+ */
+#define MICRODEV_LINUX_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
+#define MICRODEV_LINUX_IRQ_SERIAL1	 2	/* SuperIO Serial #1 */
+#define MICRODEV_LINUX_IRQ_ETHERNET	 3	/* on-board Ethnernet */
+#define MICRODEV_LINUX_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
+#define MICRODEV_LINUX_IRQ_USB_HC	 7	/* on-board USB HC */
+#define MICRODEV_LINUX_IRQ_MOUSE	12	/* SuperIO PS/2 Mouse */
+#define MICRODEV_LINUX_IRQ_IDE2		13	/* SuperIO IDE #2 */
+#define MICRODEV_LINUX_IRQ_IDE1		14	/* SuperIO IDE #1 */
+
+/*
+ * The following are the IRQ numbers for the INTC on the FPGA for
+ * external interrupts.  i.e. the bits in the INTC registers in the
+ * FPGA.
+ */
+#define MICRODEV_FPGA_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
+#define MICRODEV_FPGA_IRQ_SERIAL1	 3	/* SuperIO Serial #1 */
+#define MICRODEV_FPGA_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
+#define MICRODEV_FPGA_IRQ_MOUSE		12	/* SuperIO PS/2 Mouse */
+#define MICRODEV_FPGA_IRQ_IDE1		14	/* SuperIO IDE #1 */
+#define MICRODEV_FPGA_IRQ_IDE2		15	/* SuperIO IDE #2 */
+#define MICRODEV_FPGA_IRQ_USB_HC	16	/* on-board USB HC */
+#define MICRODEV_FPGA_IRQ_ETHERNET	18	/* on-board Ethnernet */
+
+#define MICRODEV_IRQ_PCI_INTA		 8
+#define MICRODEV_IRQ_PCI_INTB		 9
+#define MICRODEV_IRQ_PCI_INTC		10
+#define MICRODEV_IRQ_PCI_INTD		11
+
+#define __IO_PREFIX microdev
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_MICRODEV_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/r2d.h b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/r2d.h
new file mode 100644
index 0000000..0d7e483
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/r2d.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
+#define __ASM_SH_RENESAS_RTS7751R2D_H
+
+/*
+ * linux/include/asm-sh/renesas_rts7751r2d.h
+ *
+ * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
+ *
+ * Renesas Technology Sales RTS7751R2D support
+ */
+
+/* Board specific addresses.  */
+
+#define PA_BCR		0xa4000000	/* FPGA */
+#define PA_IRLMON	0xa4000002	/* Interrupt Status control */
+#define PA_CFCTL	0xa4000004	/* CF Timing control */
+#define PA_CFPOW	0xa4000006	/* CF Power control */
+#define PA_DISPCTL	0xa4000008	/* Display Timing control */
+#define PA_SDMPOW	0xa400000a	/* SD Power control */
+#define PA_RTCCE	0xa400000c	/* RTC(9701) Enable control */
+#define PA_PCICD	0xa400000e	/* PCI Extension detect control */
+#define PA_VOYAGERRTS	0xa4000020	/* VOYAGER Reset control */
+
+#define PA_R2D1_AXRST		0xa4000022	/* AX_LAN Reset control */
+#define PA_R2D1_CFRST		0xa4000024	/* CF Reset control */
+#define PA_R2D1_ADMRTS		0xa4000026	/* SD Reset control */
+#define PA_R2D1_EXTRST		0xa4000028	/* Extension Reset control */
+#define PA_R2D1_CFCDINTCLR	0xa400002a	/* CF Insert Interrupt clear */
+
+#define PA_R2DPLUS_CFRST	0xa4000022	/* CF Reset control */
+#define PA_R2DPLUS_ADMRTS	0xa4000024	/* SD Reset control */
+#define PA_R2DPLUS_EXTRST	0xa4000026	/* Extension Reset control */
+#define PA_R2DPLUS_CFCDINTCLR	0xa4000028	/* CF Insert Interrupt clear */
+#define PA_R2DPLUS_KEYCTLCLR	0xa400002a	/* Key Interrupt clear */
+
+#define PA_POWOFF	0xa4000030	/* Board Power OFF control */
+#define PA_VERREG	0xa4000032	/* FPGA Version Register */
+#define PA_INPORT	0xa4000034	/* KEY Input Port control */
+#define PA_OUTPORT	0xa4000036	/* LED control */
+#define PA_BVERREG	0xa4000038	/* Board Revision Register */
+
+#define PA_AX88796L	0xaa000400	/* AX88796L Area */
+#define PA_VOYAGER	0xab000000	/* VOYAGER GX Area */
+#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
+#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
+
+#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
+
+#define R2D_FPGA_IRQ_BASE	100
+
+#define IRQ_VOYAGER		(R2D_FPGA_IRQ_BASE + 0)
+#define IRQ_EXT			(R2D_FPGA_IRQ_BASE + 1)
+#define IRQ_TP			(R2D_FPGA_IRQ_BASE + 2)
+#define IRQ_RTC_T		(R2D_FPGA_IRQ_BASE + 3)
+#define IRQ_RTC_A		(R2D_FPGA_IRQ_BASE + 4)
+#define IRQ_SDCARD		(R2D_FPGA_IRQ_BASE + 5)
+#define IRQ_CF_CD		(R2D_FPGA_IRQ_BASE + 6)
+#define IRQ_CF_IDE		(R2D_FPGA_IRQ_BASE + 7)
+#define IRQ_AX88796		(R2D_FPGA_IRQ_BASE + 8)
+#define IRQ_KEY			(R2D_FPGA_IRQ_BASE + 9)
+#define IRQ_PCI_INTA		(R2D_FPGA_IRQ_BASE + 10)
+#define IRQ_PCI_INTB		(R2D_FPGA_IRQ_BASE + 11)
+#define IRQ_PCI_INTC		(R2D_FPGA_IRQ_BASE + 12)
+#define IRQ_PCI_INTD		(R2D_FPGA_IRQ_BASE + 13)
+
+/* arch/sh/boards/renesas/rts7751r2d/irq.c */
+void init_rts7751r2d_IRQ(void);
+int rts7751r2d_irq_demux(int);
+
+#endif  /* __ASM_SH_RENESAS_RTS7751R2D */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/romimage.h b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/romimage.h
new file mode 100644
index 0000000..1915714
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/romimage.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifdef __ASSEMBLY__
+
+/* do nothing here by default */
+
+#else /* __ASSEMBLY__ */
+
+static inline void mmcif_update_progress(int nr)
+{
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/sdk7780.h b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/sdk7780.h
new file mode 100644
index 0000000..ce64e02
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/sdk7780.h
@@ -0,0 +1,82 @@
+#ifndef __ASM_SH_RENESAS_SDK7780_H
+#define __ASM_SH_RENESAS_SDK7780_H
+
+/*
+ * linux/include/asm-sh/sdk7780.h
+ *
+ * Renesas Solutions SH7780 SDK Support
+ * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/sh_intc.h>
+#include <asm/addrspace.h>
+
+/* Box specific addresses.  */
+#define SE_AREA0_WIDTH	4		/* Area0: 32bit */
+#define PA_ROM			0xa0000000	/* EPROM */
+#define PA_ROM_SIZE		0x00400000	/* EPROM size 4M byte */
+#define PA_FROM			0xa0800000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x00400000	/* Flash-ROM size 4M byte */
+#define PA_EXT1			0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SDRAM		0xa8000000	/* DDR-SDRAM(Area2/3) 128MB */
+#define PA_SDRAM_SIZE	0x08000000
+
+#define PA_EXT4			0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+#define PA_EXT_USER		PA_EXT4		/* User Expansion Space */
+
+#define PA_PERIPHERAL	PA_AREA5_IO
+
+/* SRAM/Reserved */
+#define PA_RESERVED	(PA_PERIPHERAL + 0)
+/* FPGA base address */
+#define PA_FPGA		(PA_PERIPHERAL + 0x01000000)
+/* SMC LAN91C111 */
+#define PA_LAN		(PA_PERIPHERAL + 0x01800000)
+
+
+#define FPGA_SRSTR      (PA_FPGA + 0x000)	/* System reset */
+#define FPGA_IRQ0SR     (PA_FPGA + 0x010)	/* IRQ0 status */
+#define FPGA_IRQ0MR     (PA_FPGA + 0x020)	/* IRQ0 mask */
+#define FPGA_BDMR       (PA_FPGA + 0x030)	/* Board operating mode */
+#define FPGA_INTT0PRTR  (PA_FPGA + 0x040)	/* Interrupt test mode0 port */
+#define FPGA_INTT0SELR  (PA_FPGA + 0x050)	/* Int. test mode0 select */
+#define FPGA_INTT1POLR  (PA_FPGA + 0x060)	/* Int. test mode0 polarity */
+#define FPGA_NMIR       (PA_FPGA + 0x070)	/* NMI source */
+#define FPGA_NMIMR      (PA_FPGA + 0x080)	/* NMI mask */
+#define FPGA_IRQR       (PA_FPGA + 0x090)	/* IRQX source */
+#define FPGA_IRQMR      (PA_FPGA + 0x0A0)	/* IRQX mask */
+#define FPGA_SLEDR      (PA_FPGA + 0x0B0)	/* LED control */
+#define PA_LED			FPGA_SLEDR
+#define FPGA_MAPSWR     (PA_FPGA + 0x0C0)	/* Map switch */
+#define FPGA_FPVERR     (PA_FPGA + 0x0D0)	/* FPGA version */
+#define FPGA_FPDATER    (PA_FPGA + 0x0E0)	/* FPGA date */
+#define FPGA_RSE        (PA_FPGA + 0x100)	/* Reset source */
+#define FPGA_EASR       (PA_FPGA + 0x110)	/* External area select */
+#define FPGA_SPER       (PA_FPGA + 0x120)	/* Serial port enable */
+#define FPGA_IMSR       (PA_FPGA + 0x130)	/* Interrupt mode select */
+#define FPGA_PCIMR      (PA_FPGA + 0x140)	/* PCI Mode */
+#define FPGA_DIPSWMR    (PA_FPGA + 0x150)	/* DIPSW monitor */
+#define FPGA_FPODR      (PA_FPGA + 0x160)	/* Output port data */
+#define FPGA_ATAESR     (PA_FPGA + 0x170)	/* ATA extended bus status */
+#define FPGA_IRQPOLR    (PA_FPGA + 0x180)	/* IRQx polarity */
+
+
+#define SDK7780_NR_IRL			15
+/* IDE/ATA interrupt */
+#define IRQ_CFCARD			evt2irq(0x3c0)
+/* SMC interrupt */
+#define IRQ_ETHERNET			evt2irq(0x2c0)
+
+
+/* arch/sh/boards/renesas/sdk7780/irq.c */
+void init_sdk7780_IRQ(void);
+
+#define __IO_PREFIX		sdk7780
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_RENESAS_SDK7780_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/secureedge5410.h b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/secureedge5410.h
new file mode 100644
index 0000000..3653b9a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/secureedge5410.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-sh/snapgear.h
+ *
+ * Modified version of io_se.h for the snapgear-specific functions.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for a SnapGear
+ */
+
+#ifndef _ASM_SH_IO_SNAPGEAR_H
+#define _ASM_SH_IO_SNAPGEAR_H
+
+#define __IO_PREFIX	snapgear
+#include <asm/io_generic.h>
+
+/*
+ * We need to remember what was written to the ioport as some bits
+ * are shared with other functions and you cannot read back what was
+ * written :-|
+ *
+ * Bit        Read                   Write
+ * -----------------------------------------------
+ * D0         DCD on ttySC1          power
+ * D1         Reset Switch           heatbeat
+ * D2         ttySC0 CTS (7100)      LAN
+ * D3         -                      WAN
+ * D4         ttySC0 DCD (7100)      CONSOLE
+ * D5         -                      ONLINE
+ * D6         -                      VPN
+ * D7         -                      DTR on ttySC1
+ * D8         -                      ttySC0 RTS (7100)
+ * D9         -                      ttySC0 DTR (7100)
+ * D10        -                      RTC SCLK
+ * D11        RTC DATA               RTC DATA
+ * D12        -                      RTS RESET
+ */
+
+#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
+extern unsigned short secureedge5410_ioport;
+
+#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
+	 (secureedge5410_ioport = \
+			((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
+#define SECUREEDGE_READ_IOPORT() \
+	 ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
+
+#endif /* _ASM_SH_IO_SNAPGEAR_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/sh2007.h b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/sh2007.h
new file mode 100644
index 0000000..eeb1290
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/sh2007.h
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_SH2007_H
+#define __MACH_SH2007_H
+
+#define CS5BCR		0xff802050
+#define CS5WCR		0xff802058
+#define CS5PCR		0xff802070
+
+#define BUS_SZ8		1
+#define BUS_SZ16	2
+#define BUS_SZ32	3
+
+#define PCMCIA_IODYN	1
+#define PCMCIA_ATA	0
+#define PCMCIA_IO8	2
+#define PCMCIA_IO16	3
+#define PCMCIA_COMM8	4
+#define PCMCIA_COMM16	5
+#define PCMCIA_ATTR8	6
+#define PCMCIA_ATTR16	7
+
+#define TYPE_SRAM	0
+#define TYPE_PCMCIA	4
+
+/* write-read/write-write delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWW5		0
+#define IWW6		3
+/* different area, read-write delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWRWD5		2
+#define IWRWD6		2
+/* same area, read-write delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWRWS5		2
+#define IWRWS6		2
+/* different area, read-read delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWRRD5		2
+#define IWRRD6		2
+/* same area, read-read delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWRRS5		0
+#define IWRRS6		2
+/* burst count (0-3:4,8,16,32) */
+#define BST5		0
+#define BST6		0
+/* bus size */
+#define SZ5		BUS_SZ16
+#define SZ6		BUS_SZ16
+/* RD hold for SRAM (0-1:0,1) */
+#define RDSPL5		0
+#define RDSPL6		0
+/* Burst pitch (0-7:0,1,2,3,4,5,6,7) */
+#define BW5		0
+#define BW6		0
+/* Multiplex (0-1:0,1) */
+#define MPX5		0
+#define MPX6		0
+/* device type */
+#define TYPE5		TYPE_PCMCIA
+#define TYPE6		TYPE_PCMCIA
+/* address setup before assert CSn for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define ADS5		0
+#define ADS6		0
+/* address hold after negate CSn for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define ADH5		0
+#define ADH6		0
+/* CSn assert to RD assert delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define RDS5		0
+#define RDS6		0
+/* RD negate to CSn negate delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define RDH5		0
+#define RDH6		0
+/* CSn assert to WE assert delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define WTS5		0
+#define WTS6		0
+/* WE negate to CSn negate delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define WTH5		0
+#define WTH6		0
+/* BS hold (0-1:1,2) */
+#define BSH5		0
+#define BSH6		0
+/* wait cycle (0-15:0,1,2,3,4,5,6,7,8,9,11,13,15,17,21,25) */
+#define IW5		6	/* 60ns PIO mode 4 */
+#define IW6		15	/* 250ns */
+
+#define SAA5		PCMCIA_IODYN	/* IDE area b4000000-b5ffffff */
+#define SAB5		PCMCIA_IODYN	/* CF  area b6000000-b7ffffff */
+#define PCWA5		0	/* additional wait A (0-3:0,15,30,50) */
+#define PCWB5		0	/* additional wait B (0-3:0,15,30,50) */
+/* wait B (0-15:0,1,2,3,4,5,6,7,8,9,11,13,15,17,21,25) */
+#define PCIW5		12
+/* Address->OE/WE assert delay A (0-7:0,1,2,3,6,9,12,15) */
+#define TEDA5		2
+/* Address->OE/WE assert delay B (0-7:0,1,2,3,6,9,12,15) */
+#define TEDB5		4
+/* OE/WE negate->Address delay A (0-7:0,1,2,3,6,9,12,15) */
+#define TEHA5		2
+/* OE/WE negate->Address delay B (0-7:0,1,2,3,6,9,12,15) */
+#define TEHB5		3
+
+#define CS5BCR_D	((IWW5<<28)|(IWRWD5<<24)|(IWRWS5<<20)|		\
+			(IWRRD5<<16)|(IWRRS5<<12)|(BST5<<10)|		\
+			(SZ5<<8)|(RDSPL5<<7)|(BW5<<4)|(MPX5<<3)|TYPE5)
+#define CS5WCR_D	((ADS5<<28)|(ADH5<<24)|(RDS5<<20)|	\
+			(RDH5<<16)|(WTS5<<12)|(WTH5<<8)|(BSH5<<4)|IW5)
+#define CS5PCR_D	((SAA5<<28)|(SAB5<<24)|(PCWA5<<22)|		\
+			(PCWB5<<20)|(PCIW5<<16)|(TEDA5<<12)|		\
+			(TEDB5<<8)|(TEHA5<<4)|TEHB5)
+
+#define SMC0_BASE       0xb0800000      /* eth0 */
+#define SMC1_BASE       0xb0900000      /* eth1 */
+#define CF_BASE         0xb6100000      /* Compact Flash (I/O area) */
+#define IDE_BASE        0xb4000000      /* IDE */
+#define PC104_IO_BASE   0xb8000000
+#define PC104_MEM_BASE  0xba000000
+#define SMC_IO_SIZE     0x100
+
+#define CF_OFFSET       0x1f0
+#define IDE_OFFSET      0x170
+
+#endif /* __MACH_SH2007_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/sh7763rdp.h b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/sh7763rdp.h
new file mode 100644
index 0000000..8750cc8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/sh7763rdp.h
@@ -0,0 +1,54 @@
+#ifndef __ASM_SH_SH7763RDP_H
+#define __ASM_SH_SH7763RDP_H
+
+/*
+ * linux/include/asm-sh/sh7763drp.h
+ *
+ * Copyright (C) 2008 Renesas Solutions
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+/* clock control */
+#define MSTPCR1 0xFFC80038
+
+/* PORT */
+#define PORT_PSEL0	0xFFEF0070
+#define PORT_PSEL1	0xFFEF0072
+#define PORT_PSEL2	0xFFEF0074
+#define PORT_PSEL3	0xFFEF0076
+#define PORT_PSEL4	0xFFEF0078
+
+#define PORT_PACR	0xFFEF0000
+#define PORT_PCCR	0xFFEF0004
+#define PORT_PFCR	0xFFEF000A
+#define PORT_PGCR	0xFFEF000C
+#define PORT_PHCR	0xFFEF000E
+#define PORT_PICR	0xFFEF0010
+#define PORT_PJCR	0xFFEF0012
+#define PORT_PKCR	0xFFEF0014
+#define PORT_PLCR	0xFFEF0016
+#define PORT_PMCR	0xFFEF0018
+#define PORT_PNCR	0xFFEF001A
+
+/* FPGA */
+#define CPLD_BOARD_ID_ERV_REG	0xB1000000
+#define CPLD_CPLD_CMD_REG		0xB1000006
+
+/*
+ * USB SH7763RDP board can use Host only.
+ */
+#define USB_USBHSC	0xFFEC80f0
+
+/* arch/sh/boards/renesas/sh7763rdp/irq.c */
+void init_sh7763rdp_IRQ(void);
+int sh7763rdp_irq_demux(int irq);
+#define __IO_PREFIX	sh7763rdp
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_SH7763RDP_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/sh7785lcr.h b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/sh7785lcr.h
new file mode 100644
index 0000000..0f3dc3a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/sh7785lcr.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_RENESAS_SH7785LCR_H
+#define __ASM_SH_RENESAS_SH7785LCR_H
+
+/*
+ * This board has 2 physical memory maps.
+ * It can be changed with DIP switch(S2-5).
+ *
+ * phys address			| S2-5 = OFF	| S2-5 = ON
+ * -----------------------------+---------------+---------------
+ * 0x00000000 - 0x03ffffff(CS0)	| NOR Flash	| NOR Flash
+ * 0x04000000 - 0x05ffffff(CS1)	| PLD		| PLD
+ * 0x06000000 - 0x07ffffff(CS1)	| I2C		| I2C
+ * 0x08000000 - 0x0bffffff(CS2)	| USB		| DDR SDRAM
+ * 0x0c000000 - 0x0fffffff(CS3)	| SD		| DDR SDRAM
+ * 0x10000000 - 0x13ffffff(CS4)	| SM107		| SM107
+ * 0x14000000 - 0x17ffffff(CS5)	| reserved	| USB
+ * 0x18000000 - 0x1bffffff(CS6)	| reserved	| SD
+ * 0x40000000 - 0x5fffffff	| DDR SDRAM	| (cannot use)
+ *
+ */
+
+#define NOR_FLASH_ADDR		0x00000000
+#define NOR_FLASH_SIZE		0x04000000
+
+#define PLD_BASE_ADDR		0x04000000
+#define PLD_PCICR		(PLD_BASE_ADDR + 0x00)
+#define PLD_LCD_BK_CONTR	(PLD_BASE_ADDR + 0x02)
+#define PLD_LOCALCR		(PLD_BASE_ADDR + 0x04)
+#define PLD_POFCR		(PLD_BASE_ADDR + 0x06)
+#define PLD_LEDCR		(PLD_BASE_ADDR + 0x08)
+#define PLD_SWSR		(PLD_BASE_ADDR + 0x0a)
+#define PLD_VERSR		(PLD_BASE_ADDR + 0x0c)
+#define PLD_MMSR		(PLD_BASE_ADDR + 0x0e)
+
+#define PCA9564_ADDR		0x06000000	/* I2C */
+#define PCA9564_SIZE		0x00000100
+
+#define PCA9564_PROTO_32BIT_ADDR	0x14000000
+
+#define SM107_MEM_ADDR		0x10000000
+#define SM107_MEM_SIZE		0x00e00000
+#define SM107_REG_ADDR		0x13e00000
+#define SM107_REG_SIZE		0x00200000
+
+#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS)
+#define R8A66597_ADDR		0x14000000	/* USB */
+#define CG200_ADDR		0x18000000	/* SD */
+#else
+#define R8A66597_ADDR		0x08000000
+#define CG200_ADDR		0x0c000000
+#endif
+
+#define R8A66597_SIZE		0x00000100
+#define CG200_SIZE		0x00010000
+
+#endif  /* __ASM_SH_RENESAS_SH7785LCR_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/shmin.h b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/shmin.h
new file mode 100644
index 0000000..c2c3e26
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/shmin.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SHMIN_H
+#define __ASM_SH_SHMIN_H
+
+#define SHMIN_IO_BASE 0xb0000000UL
+
+#define SHMIN_NE_IRQ IRQ2_IRQ
+#define SHMIN_NE_BASE 0x300
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/titan.h b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/titan.h
new file mode 100644
index 0000000..54df351
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/titan.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Platform definitions for Titan
+ */
+#ifndef _ASM_SH_TITAN_H
+#define _ASM_SH_TITAN_H
+
+#include <linux/sh_intc.h>
+
+#define __IO_PREFIX titan
+#include <asm/io_generic.h>
+
+/* IRQ assignments */
+#define TITAN_IRQ_WAN		evt2irq(0x240)	/* eth0 (WAN) */
+#define TITAN_IRQ_LAN		evt2irq(0x2a0)	/* eth1 (LAN) */
+#define TITAN_IRQ_MPCIA		evt2irq(0x300)	/* mPCI A */
+#define TITAN_IRQ_MPCIB		evt2irq(0x360)	/* mPCI B */
+#define TITAN_IRQ_USB		evt2irq(0x360)	/* USB */
+
+#endif /* __ASM_SH_TITAN_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/urquell.h b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/urquell.h
new file mode 100644
index 0000000..6c9bff3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-common/mach/urquell.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_URQUELL_H
+#define __MACH_URQUELL_H
+
+/*
+ * ------ 0x00000000 ------------------------------------
+ *  CS0 | (SW1,SW47)    EEPROM, SRAM, NOR FLASH
+ * -----+ 0x04000000 ------------------------------------
+ *  CS1 | (SW47)        SRAM, SRAM-LAN-PCMCIA, NOR FLASH
+ * -----+ 0x08000000 ------------------------------------
+ *  CS2 |               DDR3
+ *  CS3 |
+ * -----+ 0x10000000 ------------------------------------
+ *  CS4 |               PCIe
+ * -----+ 0x14000000 ------------------------------------
+ *  CS5 | (SW47)        LRAM/URAM, SRAM-LAN-PCMCIA
+ * -----+ 0x18000000 ------------------------------------
+ *  CS6 |               ATA, NAND FLASH
+ * -----+ 0x1c000000 ------------------------------------
+ *  CS7 |               SH7786 register
+ * -----+------------------------------------------------
+ */
+
+#define NOR_FLASH_ADDR	0x00000000
+#define NOR_FLASH_SIZE	0x04000000
+
+#define CS1_BASE	0x05000000
+#define CS5_BASE	0x15000000
+#define FPGA_BASE	CS1_BASE
+
+#define BOARDREG(ofs)	(FPGA_BASE + ofs##_OFS)
+#define UBOARDREG(ofs)	(0xa0000000 + FPGA_BASE + ofs##_OFS)
+
+#define SRSTR_OFS	0x0000 /* System reset register */
+#define BDMR_OFS	0x0010 /* Board operating mode resister */
+#define IRL0SR_OFS	0x0020 /* IRL0 Status register */
+#define IRL0MSKR_OFS	0x0030 /* IRL0 Mask register */
+#define IRL1SR_OFS	0x0040 /* IRL1 Status register */
+#define IRL1MSKR_OFS	0x0050 /* IRL1 Mask register */
+#define IRL2SR_OFS	0x0060 /* IRL2 Status register */
+#define IRL2MSKR_OFS	0x0070 /* IRL2 Mask register */
+#define IRL3SR_OFS	0x0080 /* IRL3 Status register */
+#define IRL3MSKR_OFS	0x0090 /* IRL3 Mask register */
+#define SOFTINTR_OFS	0x0120 /* Softwear Interrupt register */
+#define SLEDR_OFS	0x0130 /* LED control resister */
+#define MAPSCIFSWR_OFS	0x0140 /* Map/SCIF Switch register */
+#define FPVERR_OFS	0x0150 /* FPGA Version register */
+#define FPDATER_OFS	0x0160 /* FPGA Date register */
+#define FPYEARR_OFS	0x0170 /* FPGA Year register */
+#define TCLKCR_OFS	0x0180 /* TCLK Control register */
+#define DIPSWMR_OFS	0x1000 /* DIPSW monitor register */
+#define FPODR_OFS	0x1010 /* Output port data register */
+#define ATACNR_OFS	0x1020 /* ATA-CN Control/status register */
+#define FPINDR_OFS	0x1030 /* Input port data register */
+#define MDSWMR_OFS	0x1040 /* MODE SW monitor register */
+#define DDR3BUPCR_OFS	0x1050 /* DDR3 Backup control register */
+#define SSICODECCR_OFS	0x1060 /* SSI-CODEC control register */
+#define PCIESLOTSR_OFS	0x1070 /* PCIexpress Slot status register */
+#define ETHERPORTSR_OFS	0x1080 /* EtherPhy Port status register */
+#define LATCHCR_OFS	0x3000 /* Latch control register */
+#define LATCUAR_OFS	0x3010 /* Latch upper address register */
+#define LATCLAR_OFS	0x3012 /* Latch lower address register */
+#define LATCLUDR_OFS	0x3024 /* Latch D31-16 register */
+#define LATCLLDR_OFS	0x3026 /* Latch D15-0 register */
+
+#define CHARLED_OFS	0x2000 /* Character LED */
+
+#endif  /* __MACH_URQUELL_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-dreamcast/mach/dma.h b/src/kernel/linux/v4.14/arch/sh/include/mach-dreamcast/mach/dma.h
new file mode 100644
index 0000000..1dbfdf7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-dreamcast/mach/dma.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-sh/dreamcast/dma.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_DREAMCAST_DMA_H
+#define __ASM_SH_DREAMCAST_DMA_H
+
+/* Number of DMA channels */
+#define G2_NR_DMA_CHANNELS	4
+
+/* Channels for cascading */
+#define PVR2_CASCADE_CHAN	2
+#define G2_CASCADE_CHAN		3
+
+/* PVR2 DMA Registers */
+#define PVR2_DMA_BASE		0xa05f6800
+#define PVR2_DMA_ADDR		(PVR2_DMA_BASE + 0)
+#define PVR2_DMA_COUNT		(PVR2_DMA_BASE + 4)
+#define PVR2_DMA_MODE		(PVR2_DMA_BASE + 8)
+#define PVR2_DMA_LMMODE0	(PVR2_DMA_BASE + 132)
+#define PVR2_DMA_LMMODE1	(PVR2_DMA_BASE + 136)
+
+/* G2 DMA Register */
+#define G2_DMA_BASE		0xa05f7800
+
+#endif /* __ASM_SH_DREAMCAST_DMA_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-dreamcast/mach/maple.h b/src/kernel/linux/v4.14/arch/sh/include/mach-dreamcast/mach/maple.h
new file mode 100644
index 0000000..169bdf4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-dreamcast/mach/maple.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MAPLE_H
+#define __ASM_MAPLE_H
+
+#define MAPLE_PORTS 4
+#define MAPLE_PNP_INTERVAL HZ
+#define MAPLE_MAXPACKETS 8
+#define MAPLE_DMA_ORDER 14
+#define MAPLE_DMA_SIZE (1 << MAPLE_DMA_ORDER)
+#define MAPLE_DMA_PAGES ((MAPLE_DMA_ORDER > PAGE_SHIFT) ? \
+			  MAPLE_DMA_ORDER - PAGE_SHIFT : 0)
+
+/* Maple Bus registers */
+#define MAPLE_BASE     0xa05f6c00
+#define MAPLE_DMAADDR  (MAPLE_BASE+0x04)
+#define MAPLE_TRIGTYPE (MAPLE_BASE+0x10)
+#define MAPLE_ENABLE   (MAPLE_BASE+0x14)
+#define MAPLE_STATE    (MAPLE_BASE+0x18)
+#define MAPLE_SPEED    (MAPLE_BASE+0x80)
+#define MAPLE_RESET    (MAPLE_BASE+0x8c)
+
+#define MAPLE_MAGIC    0x6155404f
+#define MAPLE_2MBPS    0
+#define MAPLE_TIMEOUT(n) ((n)<<15)
+
+/* Function codes */
+#define MAPLE_FUNC_CONTROLLER 0x001
+#define MAPLE_FUNC_MEMCARD    0x002
+#define MAPLE_FUNC_LCD        0x004
+#define MAPLE_FUNC_CLOCK      0x008
+#define MAPLE_FUNC_MICROPHONE 0x010
+#define MAPLE_FUNC_ARGUN      0x020
+#define MAPLE_FUNC_KEYBOARD   0x040
+#define MAPLE_FUNC_LIGHTGUN   0x080
+#define MAPLE_FUNC_PURUPURU   0x100
+#define MAPLE_FUNC_MOUSE      0x200
+
+#endif /* __ASM_MAPLE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-dreamcast/mach/pci.h b/src/kernel/linux/v4.14/arch/sh/include/mach-dreamcast/mach/pci.h
new file mode 100644
index 0000000..0314d97
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-dreamcast/mach/pci.h
@@ -0,0 +1,27 @@
+/*
+ * include/asm-sh/dreamcast/pci.h
+ *
+ * Copyright (C) 2001, 2002  M. R. Brown
+ * Copyright (C) 2002, 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_DREAMCAST_PCI_H
+#define __ASM_SH_DREAMCAST_PCI_H
+
+#include <mach-dreamcast/mach/sysasic.h>
+
+#define	GAPSPCI_REGS		0x01001400
+#define GAPSPCI_DMA_BASE	0x01840000
+#define GAPSPCI_DMA_SIZE	32768
+#define GAPSPCI_BBA_CONFIG	0x01001600
+#define GAPSPCI_BBA_CONFIG_SIZE	0x2000
+
+#define	GAPSPCI_IRQ		HW_EVENT_EXTERNAL
+
+extern struct pci_ops gapspci_pci_ops;
+
+#endif /* __ASM_SH_DREAMCAST_PCI_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-dreamcast/mach/sysasic.h b/src/kernel/linux/v4.14/arch/sh/include/mach-dreamcast/mach/sysasic.h
new file mode 100644
index 0000000..58f710e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-dreamcast/mach/sysasic.h
@@ -0,0 +1,48 @@
+/* include/asm-sh/dreamcast/sysasic.h
+ *
+ * Definitions for the Dreamcast System ASIC and related peripherals.
+ *
+ * Copyright (c) 2001 M. R. Brown <mrbrown@linuxdc.org>
+ * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
+ *
+ * This file is part of the LinuxDC project (www.linuxdc.org)
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ */
+#ifndef __ASM_SH_DREAMCAST_SYSASIC_H
+#define __ASM_SH_DREAMCAST_SYSASIC_H
+
+#include <asm/irq.h>
+
+/* Hardware events -
+
+   Each of these events correspond to a bit within the Event Mask Registers/
+   Event Status Registers.  Because of the virtual IRQ numbering scheme, a
+   base offset must be used when calculating the virtual IRQ that each event
+   takes.
+*/
+
+#define HW_EVENT_IRQ_BASE  48
+
+/* IRQ 13 */
+#define HW_EVENT_VSYNC     (HW_EVENT_IRQ_BASE +  5) /* VSync */
+#define HW_EVENT_MAPLE_DMA (HW_EVENT_IRQ_BASE + 12) /* Maple DMA complete */
+#define HW_EVENT_GDROM_DMA (HW_EVENT_IRQ_BASE + 14) /* GD-ROM DMA complete */
+#define HW_EVENT_G2_DMA    (HW_EVENT_IRQ_BASE + 15) /* G2 DMA complete */
+#define HW_EVENT_PVR2_DMA  (HW_EVENT_IRQ_BASE + 19) /* PVR2 DMA complete */
+
+/* IRQ 11 */
+#define HW_EVENT_GDROM_CMD (HW_EVENT_IRQ_BASE + 32) /* GD-ROM cmd. complete */
+#define HW_EVENT_AICA_SYS  (HW_EVENT_IRQ_BASE + 33) /* AICA-related */
+#define HW_EVENT_EXTERNAL  (HW_EVENT_IRQ_BASE + 35) /* Ext. (expansion) */
+
+#define HW_EVENT_IRQ_MAX (HW_EVENT_IRQ_BASE + 95)
+
+/* arch/sh/boards/mach-dreamcast/irq.c */
+extern int systemasic_irq_demux(int);
+extern void systemasic_irq_init(void);
+extern void aica_time_init(void);
+
+#endif /* __ASM_SH_DREAMCAST_SYSASIC_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt b/src/kernel/linux/v4.14/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
new file mode 100644
index 0000000..cc737b8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
@@ -0,0 +1,81 @@
+LIST "partner-jet-setup.txt"
+LIST "(C) Copyright 2009 Renesas Solutions Corp"
+LIST "Kuninori Morimoto <morimoto.kuninori@renesas.com>"
+LIST "--------------------------------"
+LIST "zImage (RAM boot)"
+LIST "This script can be used to boot the kernel from RAM via JTAG:"
+LIST "> < partner-jet-setup.txt"
+LIST "> RD zImage, 0xa8800000"
+LIST "> G=0xa8800000"
+LIST "--------------------------------"
+LIST "romImage (Flash boot)"
+LIST "Use the following command to burn the zImage to flash via JTAG:"
+LIST "> RD romImage, 0"
+LIST "--------------------------------"
+
+LIST "disable watchdog"
+EW 0xa4520004, 0xa507
+
+LIST "MMU"
+ED 0xff000010, 0x00000004
+
+LIST "setup clocks"
+ED 0xa4150024, 0x00004000
+ED 0xa4150000, 0x8E003508
+
+WAIT 1
+
+LIST "BSC"
+ED 0xff800020, 0xa5a50000
+ED 0xfec10000, 0x00001013
+ED 0xfec10004, 0x11110400
+ED 0xfec10024, 0x00000440
+
+WAIT 1
+
+LIST "setup sdram"
+ED 0xfd000108, 0x00000181
+ED 0xfd000020, 0x015B0002
+ED 0xfd000030, 0x03061502
+ED 0xfd000034, 0x02020102
+ED 0xfd000038, 0x01090305
+ED 0xfd00003c, 0x00000002
+ED 0xfd000008, 0x00000005
+ED 0xfd000018, 0x00000001
+
+WAIT 1
+
+ED 0xfd000014, 0x00000002
+ED 0xfd000060, 0x00020000
+ED 0xfd000060, 0x00030000
+ED 0xfd000060, 0x00010040
+ED 0xfd000060, 0x00000532
+ED 0xfd000014, 0x00000002
+ED 0xfd000014, 0x00000004
+ED 0xfd000014, 0x00000004
+ED 0xfd000060, 0x00000432
+ED 0xfd000060, 0x000103C0
+ED 0xfd000060, 0x00010040
+
+WAIT 1
+
+ED 0xfd000010, 0x00000001
+ED 0xfd000044, 0x00000613
+ED 0xfd000048, 0x238C003A
+ED 0xfd000014, 0x00000002
+
+LIST "Dummy read"
+DD 0x0c400000, 0x0c400000
+
+ED 0xfd000014, 0x00000002
+ED 0xfd000014, 0x00000004
+ED 0xfd000108, 0x00000080
+ED 0xfd000040, 0x00010000
+
+WAIT 1
+
+LIST "setup cache"
+ED 0xff00001c, 0x0000090b
+
+LIST "disable USB"
+EW 0xA4D80000, 0x0000
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-ecovec24/mach/romimage.h b/src/kernel/linux/v4.14/arch/sh/include/mach-ecovec24/mach/romimage.h
new file mode 100644
index 0000000..2da6ff3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-ecovec24/mach/romimage.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifdef __ASSEMBLY__
+
+/* EcoVec board specific boot code:
+ * converts the "partner-jet-script.txt" script into assembly
+ * the assembly code is the first code to be executed in the romImage
+ */
+
+#include <asm/romimage-macros.h>
+#include <mach/partner-jet-setup.txt>
+
+	/* execute icbi after enabling cache */
+	mov.l	1f, r0
+	icbi	@r0
+
+	/* jump to cached area */
+	mova	2f, r0
+	jmp	@r0
+	nop
+
+	.align 2
+1 :	.long 0xa8000000
+2 :
+
+#else /* __ASSEMBLY__ */
+
+/* Ecovec board specific information:
+ *
+ * Set the following to enable MMCIF boot from the MMC card in CN12:
+ *
+ * DS1.5 = OFF (SH BOOT pin set to L)
+ * DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1)
+ * DS2.7 = ON  (Select MMCIF on CN12 instead of SDHI1)
+ *
+ */
+#define HIZCRA		0xa4050158
+#define PGDR		0xa405012c
+
+static inline void mmcif_update_progress(int nr)
+{
+	/* disable Hi-Z for LED pins */
+	__raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA);
+
+	/* update progress on LED4, LED5, LED6 and LED7 */
+	__raw_writeb(1 << (nr - 1), PGDR);
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h b/src/kernel/linux/v4.14/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
new file mode 100644
index 0000000..0e97473
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_KFR2R09_H
+#define __ASM_SH_KFR2R09_H
+
+#include <video/sh_mobile_lcdc.h>
+
+#if defined(CONFIG_FB_SH_MOBILE_LCDC) || defined(CONFIG_FB_SH_MOBILE_LCDC_MODULE)
+int kfr2r09_lcd_setup(void *sys_ops_handle,
+		      struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+void kfr2r09_lcd_start(void *sys_ops_handle,
+		       struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+#else
+static int kfr2r09_lcd_setup(void *sys_ops_handle,
+				struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
+{
+	return -ENODEV;
+}
+static void kfr2r09_lcd_start(void *sys_ops_handle,
+				struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
+{
+}
+#endif
+
+#endif /* __ASM_SH_KFR2R09_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt b/src/kernel/linux/v4.14/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
new file mode 100644
index 0000000..3a65503
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
@@ -0,0 +1,143 @@
+LIST "partner-jet-setup.txt - 20090729 Magnus Damm"
+LIST "set up enough of the kfr2r09 hardware to boot the kernel"
+
+LIST "zImage (RAM boot)"
+LIST "This script can be used to boot the kernel from RAM via JTAG:"
+LIST "> < partner-jet-setup.txt"
+LIST "> RD zImage, 0xa8800000"
+LIST "> G=0xa8800000"
+
+LIST "romImage (Flash boot)"
+LIST "Use the following command to burn the zImage to flash via JTAG:"
+LIST "> RD romImage, 0"
+
+LIST "--------------------------------"
+
+LIST "disable watchdog"
+EW 0xa4520004, 0xa507
+
+LIST "invalidate instruction cache"
+ED 0xff00001c, 0x00000800
+
+LIST "invalidate TLBs"
+ED 0xff000010, 0x00000004
+
+LIST "select mode for cs5 + cs6"
+ED 0xff800020, 0xa5a50001
+ED 0xfec10000, 0x0000001b
+
+LIST "setup clocks"
+LIST "The PLL and FLL values are updated here for the optimal"
+LIST "RF frequency and improved reception sensitivity."
+ED 0xa4150004, 0x00000050
+ED 0xa4150000, 0x91053508
+WAIT 1
+ED 0xa4150050, 0x00000340
+ED 0xa4150024, 0x00005000
+
+LIST "setup pins"
+EB 0xa4050120, 0x00
+EB 0xa4050122, 0x00
+EB 0xa4050124, 0x00
+EB 0xa4050126, 0x00
+EB 0xa4050128, 0xA0
+EB 0xa405012A, 0x10
+EB 0xa405012C, 0x00
+EB 0xa405012E, 0x00
+EB 0xa4050130, 0x00
+EB 0xa4050132, 0x00
+EB 0xa4050134, 0x01
+EB 0xa4050136, 0x40
+EB 0xa4050138, 0x00
+EB 0xa405013A, 0x00
+EB 0xa405013C, 0x00
+EB 0xa405013E, 0x20
+EB 0xa4050160, 0x00
+EB 0xa4050162, 0x40
+EB 0xa4050164, 0x03
+EB 0xa4050166, 0x00
+EB 0xa4050168, 0x00
+EB 0xa405016A, 0x00
+EB 0xa405016C, 0x00
+
+EW 0xa405014E, 0x5660
+EW 0xa4050150, 0x0145
+EW 0xa4050152, 0x1550
+EW 0xa4050154, 0x0200
+EW 0xa4050156, 0x0040
+
+EW 0xa4050158, 0x0000
+EW 0xa405015a, 0x0000
+EW 0xa405015c, 0x0000
+EW 0xa405015e, 0x0000
+
+EW 0xa4050180, 0x0000
+EW 0xa4050182, 0x8002
+EW 0xa4050184, 0x0000
+
+EW 0xa405018a, 0x9991
+EW 0xa405018c, 0x8011
+EW 0xa405018e, 0x9550
+
+EW 0xa4050100, 0x0000
+EW 0xa4050102, 0x5540
+EW 0xa4050104, 0x0000
+EW 0xa4050106, 0x0000
+EW 0xa4050108, 0x4550
+EW 0xa405010a, 0x0130
+EW 0xa405010c, 0x0555
+EW 0xa405010e, 0x0000
+EW 0xa4050110, 0x0000
+EW 0xa4050112, 0xAAA8
+EW 0xa4050114, 0x8305
+EW 0xa4050116, 0x10F0
+EW 0xa4050118, 0x0F50
+EW 0xa405011a, 0x0000
+EW 0xa405011c, 0x0000
+EW 0xa405011e, 0x0555
+EW 0xa4050140, 0x0000
+EW 0xa4050142, 0x5141
+EW 0xa4050144, 0x5005
+EW 0xa4050146, 0xAAA9
+EW 0xa4050148, 0xFAA9
+EW 0xa405014a, 0x3000
+EW 0xa405014c, 0x0000
+
+LIST "setup sdram"
+ED 0xFD000108, 0x40000301
+ED 0xFD000020, 0x011B0002
+ED 0xFD000030, 0x03060E02
+ED 0xFD000034, 0x01020102
+ED 0xFD000038, 0x01090406
+ED 0xFD000008, 0x00000004
+ED 0xFD000040, 0x00000001
+ED 0xFD000040, 0x00000000
+ED 0xFD000018, 0x00000001
+
+WAIT 1
+
+ED 0xFD000014, 0x00000002
+ED 0xFD000060, 0x00000032
+ED 0xFD000060, 0x00020000
+ED 0xFD000014, 0x00000004
+ED 0xFD000014, 0x00000004
+ED 0xFD000010, 0x00000001
+ED 0xFD000044, 0x000004AF
+ED 0xFD000048, 0x20CF0037
+
+LIST "read 16 bytes from sdram"
+DD 0xa8000000, 0xa8000000, 1
+DD 0xa8000004, 0xa8000004, 1
+DD 0xa8000008, 0xa8000008, 1
+DD 0xa800000c, 0xa800000c, 1
+
+ED 0xFD000014, 0x00000002
+ED 0xFD000014, 0x00000004
+ED 0xFD000108, 0x40000300
+ED 0xFD000040, 0x00010000
+
+LIST "write to internal ram"
+ED 0xfd8007fc, 0
+
+LIST "setup cache"
+ED 0xff00001c, 0x0000090b
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-kfr2r09/mach/romimage.h b/src/kernel/linux/v4.14/arch/sh/include/mach-kfr2r09/mach/romimage.h
new file mode 100644
index 0000000..2092758
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-kfr2r09/mach/romimage.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifdef __ASSEMBLY__
+
+/* kfr2r09 board specific boot code:
+ * converts the "partner-jet-script.txt" script into assembly
+ * the assembly code is the first code to be executed in the romImage
+ */
+
+#include <asm/romimage-macros.h>
+#include <mach/partner-jet-setup.txt>
+
+	/* execute icbi after enabling cache */
+	mov.l	1f, r0
+	icbi	@r0
+
+	/* jump to cached area */
+	mova	2f, r0
+	jmp	@r0
+	 nop
+
+	.align 2
+1:	.long 0xa8000000
+2:
+
+#else /* __ASSEMBLY__ */
+
+static inline void mmcif_update_progress(int nr)
+{
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-landisk/mach/gio.h b/src/kernel/linux/v4.14/arch/sh/include/mach-landisk/mach/gio.h
new file mode 100644
index 0000000..b954de6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-landisk/mach/gio.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_LANDISK_GIO_H
+#define __ASM_SH_LANDISK_GIO_H
+
+#include <linux/ioctl.h>
+
+/* version */
+#define VERSION_STR	"1.00"
+
+/* Driver name */
+#define GIO_DRIVER_NAME		"/dev/giodrv"
+
+/* Use 'k' as magic number */
+#define GIODRV_IOC_MAGIC  'k'
+
+#define GIODRV_IOCRESET    _IO(GIODRV_IOC_MAGIC, 0)
+/*
+ * S means "Set" through a ptr,
+ * T means "Tell" directly
+ * G means "Get" (to a pointed var)
+ * Q means "Query", response is on the return value
+ * X means "eXchange": G and S atomically
+ * H means "sHift": T and Q atomically
+ */
+#define GIODRV_IOCSGIODATA1   _IOW(GIODRV_IOC_MAGIC,  1, unsigned char *)
+#define GIODRV_IOCGGIODATA1   _IOR(GIODRV_IOC_MAGIC,  2, unsigned char *)
+#define GIODRV_IOCSGIODATA2   _IOW(GIODRV_IOC_MAGIC,  3, unsigned short *)
+#define GIODRV_IOCGGIODATA2   _IOR(GIODRV_IOC_MAGIC,  4, unsigned short *)
+#define GIODRV_IOCSGIODATA4   _IOW(GIODRV_IOC_MAGIC,  5, unsigned long *)
+#define GIODRV_IOCGGIODATA4   _IOR(GIODRV_IOC_MAGIC,  6, unsigned long *)
+#define GIODRV_IOCSGIOSETADDR _IOW(GIODRV_IOC_MAGIC,  7, unsigned long *)
+#define GIODRV_IOCHARDRESET   _IO(GIODRV_IOC_MAGIC, 8) /* debugging tool */
+#define GIODRV_IOC_MAXNR 8
+
+#define GIO_READ 0x00000000
+#define GIO_WRITE 0x00000001
+
+#endif /* __ASM_SH_LANDISK_GIO_H  */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-landisk/mach/iodata_landisk.h b/src/kernel/linux/v4.14/arch/sh/include/mach-landisk/mach/iodata_landisk.h
new file mode 100644
index 0000000..b41308c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-landisk/mach/iodata_landisk.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_IODATA_LANDISK_H
+#define __ASM_SH_IODATA_LANDISK_H
+
+/*
+ * arch/sh/include/mach-landisk/mach/iodata_landisk.h
+ *
+ * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
+ *
+ * IO-DATA LANDISK support
+ */
+#include <linux/sh_intc.h>
+
+/* Box specific addresses.  */
+
+#define PA_USB		0xa4000000	/* USB Controller M66590 */
+
+#define PA_ATARST	0xb0000000	/* ATA/FATA Access Control Register */
+#define PA_LED		0xb0000001	/* LED Control Register */
+#define PA_STATUS	0xb0000002	/* Switch Status Register */
+#define PA_SHUTDOWN	0xb0000003	/* Shutdown Control Register */
+#define PA_PCIPME	0xb0000004	/* PCI PME Status Register */
+#define PA_IMASK	0xb0000005	/* Interrupt Mask Register */
+/* 2003.10.31 I-O DATA NSD NWG	add.	for shutdown port clear */
+#define PA_PWRINT_CLR	0xb0000006	/* Shutdown Interrupt clear Register */
+
+#define PA_PIDE_OFFSET	0x40		/* CF IDE Offset */
+#define PA_SIDE_OFFSET	0x40		/* HDD IDE Offset */
+
+#define IRQ_PCIINTA	evt2irq(0x2a0)	/* PCI INTA IRQ */
+#define IRQ_PCIINTB	evt2irq(0x2c0)	/* PCI INTB IRQ */
+#define IRQ_PCIINTC	evt2irq(0x2e0)	/* PCI INTC IRQ */
+#define IRQ_PCIINTD	evt2irq(0x300)	/* PCI INTD IRQ */
+#define IRQ_ATA		evt2irq(0x320)	/* ATA IRQ */
+#define IRQ_FATA	evt2irq(0x340)	/* FATA IRQ */
+#define IRQ_POWER	evt2irq(0x360)	/* Power Switch IRQ */
+#define IRQ_BUTTON	evt2irq(0x380)	/* USL-5P Button IRQ */
+#define IRQ_FAULT	evt2irq(0x3a0)	/* USL-5P Fault  IRQ */
+
+void init_landisk_IRQ(void);
+
+#define __IO_PREFIX landisk
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_IODATA_LANDISK_H */
+
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-migor/mach/migor.h b/src/kernel/linux/v4.14/arch/sh/include/mach-migor/mach/migor.h
new file mode 100644
index 0000000..2a422b7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-migor/mach/migor.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_MIGOR_H
+#define __ASM_SH_MIGOR_H
+
+#define PORT_MSELCRA 0xa4050180
+#define PORT_MSELCRB 0xa4050182
+#define BSC_CS4BCR 0xfec10010
+#define BSC_CS6ABCR 0xfec1001c
+#define BSC_CS4WCR 0xfec10030
+
+#include <video/sh_mobile_lcdc.h>
+
+int migor_lcd_qvga_setup(void *sys_ops_handle,
+			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+
+#endif /* __ASM_SH_MIGOR_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-sdk7786/mach/fpga.h b/src/kernel/linux/v4.14/arch/sh/include/mach-sdk7786/mach/fpga.h
new file mode 100644
index 0000000..76c2e84
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-sdk7786/mach/fpga.h
@@ -0,0 +1,156 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_SDK7786_FPGA_H
+#define __MACH_SDK7786_FPGA_H
+
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+
+#define SRSTR		0x000
+#define  SRSTR_MAGIC	0x1971	/* Fixed magical read value */
+
+#define INTASR		0x010
+#define INTAMR		0x020
+#define MODSWR		0x030
+#define INTTESTR	0x040
+#define SYSSR		0x050
+#define NRGPR		0x060
+
+#define NMISR		0x070
+#define  NMISR_MAN_NMI	BIT(0)
+#define  NMISR_AUX_NMI	BIT(1)
+#define  NMISR_MASK	(NMISR_MAN_NMI | NMISR_AUX_NMI)
+
+#define NMIMR		0x080
+#define  NMIMR_MAN_NMIM	BIT(0)	/* Manual NMI mask */
+#define  NMIMR_AUX_NMIM	BIT(1)	/* Auxiliary NMI mask */
+#define  NMIMR_MASK	(NMIMR_MAN_NMIM | NMIMR_AUX_NMIM)
+
+#define INTBSR		0x090
+#define INTBMR		0x0a0
+#define USRLEDR		0x0b0
+#define MAPSWR		0x0c0
+#define FPGAVR		0x0d0
+#define FPGADR		0x0e0
+#define PCBRR		0x0f0
+#define RSR		0x100
+#define EXTASR		0x110
+#define SPCAR		0x120
+#define INTMSR		0x130
+
+#define PCIECR		0x140
+#define  PCIECR_PCIEMUX1	BIT(15)
+#define  PCIECR_PCIEMUX0	BIT(14)
+#define  PCIECR_PRST4		BIT(12) /* slot 4 card present */
+#define  PCIECR_PRST3		BIT(11) /* slot 3 card present */
+#define  PCIECR_PRST2		BIT(10) /* slot 2 card present */
+#define  PCIECR_PRST1		BIT(9)  /* slot 1 card present */
+#define  PCIECR_CLKEN		BIT(4)	/* oscillator enable */
+
+#define FAER		0x150
+#define USRGPIR		0x160
+
+/* 0x170 reserved */
+
+#define LCLASR			0x180
+#define  LCLASR_FRAMEN		BIT(15)
+
+#define  LCLASR_FPGA_SEL_SHIFT	12
+#define  LCLASR_NAND_SEL_SHIFT	8
+#define  LCLASR_NORB_SEL_SHIFT	4
+#define  LCLASR_NORA_SEL_SHIFT	0
+
+#define  LCLASR_AREA_MASK	0x7
+
+#define  LCLASR_FPGA_SEL_MASK	(LCLASR_AREA_MASK << LCLASR_FPGA_SEL_SHIFT)
+#define  LCLASR_NAND_SEL_MASK	(LCLASR_AREA_MASK << LCLASR_NAND_SEL_SHIFT)
+#define  LCLASR_NORB_SEL_MASK	(LCLASR_AREA_MASK << LCLASR_NORB_SEL_SHIFT)
+#define  LCLASR_NORA_SEL_MASK	(LCLASR_AREA_MASK << LCLASR_NORA_SEL_SHIFT)
+
+#define SBCR		0x190
+#define  SCBR_I2CMEN	BIT(0)	/* FPGA I2C master enable */
+#define  SCBR_I2CCEN	BIT(1)	/* CPU I2C master enable */
+
+#define PWRCR		0x1a0
+#define  PWRCR_SCISEL0	BIT(0)
+#define  PWRCR_SCISEL1	BIT(1)
+#define  PWRCR_SCIEN	BIT(2)	/* Serial port enable */
+#define  PWRCR_PDWNACK	BIT(5)	/* Power down acknowledge */
+#define  PWRCR_PDWNREQ	BIT(7)	/* Power down request */
+#define  PWRCR_INT2	BIT(11)	/* INT2 connection to power manager */
+#define  PWRCR_BUPINIT	BIT(13)	/* DDR backup initialize */
+#define  PWRCR_BKPRST	BIT(15) /* Backup power reset */
+
+#define SPCBR		0x1b0
+#define SPICR		0x1c0
+#define SPIDR		0x1d0
+#define I2CCR		0x1e0
+#define I2CDR		0x1f0
+#define FPGACR		0x200
+#define IASELR1		0x210
+#define IASELR2		0x220
+#define IASELR3		0x230
+#define IASELR4		0x240
+#define IASELR5		0x250
+#define IASELR6		0x260
+#define IASELR7		0x270
+#define IASELR8		0x280
+#define IASELR9		0x290
+#define IASELR10	0x2a0
+#define IASELR11	0x2b0
+#define IASELR12	0x2c0
+#define IASELR13	0x2d0
+#define IASELR14	0x2e0
+#define IASELR15	0x2f0
+/* 0x300 reserved */
+#define IBSELR1		0x310
+#define IBSELR2		0x320
+#define IBSELR3		0x330
+#define IBSELR4		0x340
+#define IBSELR5		0x350
+#define IBSELR6		0x360
+#define IBSELR7		0x370
+#define IBSELR8		0x380
+#define IBSELR9		0x390
+#define IBSELR10	0x3a0
+#define IBSELR11	0x3b0
+#define IBSELR12	0x3c0
+#define IBSELR13	0x3d0
+#define IBSELR14	0x3e0
+#define IBSELR15	0x3f0
+#define USRACR		0x400
+#define BEEPR		0x410
+#define USRLCDR		0x420
+#define SMBCR		0x430
+#define SMBDR		0x440
+#define USBCR		0x450
+#define AMSR		0x460
+#define ACCR		0x470
+#define SDIFCR		0x480
+
+/* arch/sh/boards/mach-sdk7786/fpga.c */
+extern void __iomem *sdk7786_fpga_base;
+extern void sdk7786_fpga_init(void);
+
+/* arch/sh/boards/mach-sdk7786/nmi.c */
+extern void sdk7786_nmi_init(void);
+
+#define SDK7786_FPGA_REGADDR(reg)	(sdk7786_fpga_base + (reg))
+
+/*
+ * A convenience wrapper from register offset to internal I2C address,
+ * when the FPGA is in I2C slave mode.
+ */
+#define SDK7786_FPGA_I2CADDR(reg)	((reg) >> 3)
+
+static inline u16 fpga_read_reg(unsigned int reg)
+{
+	return ioread16(sdk7786_fpga_base + reg);
+}
+
+static inline void fpga_write_reg(u16 val, unsigned int reg)
+{
+	iowrite16(val, sdk7786_fpga_base + reg);
+}
+
+#endif /* __MACH_SDK7786_FPGA_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-sdk7786/mach/irq.h b/src/kernel/linux/v4.14/arch/sh/include/mach-sdk7786/mach/irq.h
new file mode 100644
index 0000000..3343380
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-sdk7786/mach/irq.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_SDK7786_IRQ_H
+#define __MACH_SDK7786_IRQ_H
+
+/* arch/sh/boards/mach-sdk7786/irq.c */
+extern void sdk7786_init_irq(void);
+
+#endif /* __MACH_SDK7786_IRQ_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/mrshpc.h b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/mrshpc.h
new file mode 100644
index 0000000..4e260f3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/mrshpc.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_SE_MRSHPC_H
+#define __MACH_SE_MRSHPC_H
+
+#include <linux/io.h>
+
+static inline void __init mrshpc_setup_windows(void)
+{
+	if ((__raw_readw(MRSHPC_CSR) & 0x000c) != 0)
+		return;	/* Not detected */
+
+	if ((__raw_readw(MRSHPC_CSR) & 0x0080) == 0) {
+		__raw_writew(0x0674, MRSHPC_CPWCR); /* Card Vcc is 3.3v? */
+	} else {
+		__raw_writew(0x0678, MRSHPC_CPWCR); /* Card Vcc is 5V */
+	}
+
+	/*
+	 *  PC-Card window open
+	 *  flag == COMMON/ATTRIBUTE/IO
+	 */
+	/* common window open */
+	__raw_writew(0x8a84, MRSHPC_MW0CR1);
+	if((__raw_readw(MRSHPC_CSR) & 0x4000) != 0)
+		/* common mode & bus width 16bit SWAP = 1*/
+		__raw_writew(0x0b00, MRSHPC_MW0CR2);
+	else
+		/* common mode & bus width 16bit SWAP = 0*/
+		__raw_writew(0x0300, MRSHPC_MW0CR2);
+
+	/* attribute window open */
+	__raw_writew(0x8a85, MRSHPC_MW1CR1);
+	if ((__raw_readw(MRSHPC_CSR) & 0x4000) != 0)
+		/* attribute mode & bus width 16bit SWAP = 1*/
+		__raw_writew(0x0a00, MRSHPC_MW1CR2);
+	else
+		/* attribute mode & bus width 16bit SWAP = 0*/
+		__raw_writew(0x0200, MRSHPC_MW1CR2);
+
+	/* I/O window open */
+	__raw_writew(0x8a86, MRSHPC_IOWCR1);
+	__raw_writew(0x0008, MRSHPC_CDCR);	 /* I/O card mode */
+	if ((__raw_readw(MRSHPC_CSR) & 0x4000) != 0)
+		__raw_writew(0x0a00, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1*/
+	else
+		__raw_writew(0x0200, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 0*/
+
+	__raw_writew(0x2000, MRSHPC_ICR);
+	__raw_writeb(0x00, PA_MRSHPC_MW2 + 0x206);
+	__raw_writeb(0x42, PA_MRSHPC_MW2 + 0x200);
+}
+
+#endif /* __MACH_SE_MRSHPC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se.h b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se.h
new file mode 100644
index 0000000..4246ef9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se.h
@@ -0,0 +1,119 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_HITACHI_SE_H
+#define __ASM_SH_HITACHI_SE_H
+
+/*
+ * linux/include/asm-sh/hitachi_se.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine support
+ */
+#include <linux/sh_intc.h>
+
+/* Box specific addresses.  */
+
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0x01000000	/* EPROM */
+#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0x12000000
+#define PA_EXT4_SIZE	0x02000000
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
+
+#define PA_83902	0xb0000000	/* DP83902A */
+#define PA_83902_IF	0xb0040000	/* DP83902A remote io port */
+#define PA_83902_RST	0xb0080000	/* DP83902A reset port */
+
+#define PA_SUPERIO	0xb0400000	/* SMC37C935A super io chip */
+#define PA_DIPSW0	0xb0800000	/* Dip switch 5,6 */
+#define PA_DIPSW1	0xb0800002	/* Dip switch 7,8 */
+#define PA_LED		0xb0c00000	/* LED */
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define PA_BCR		0xb0e00000
+#else
+#define PA_BCR		0xb1400000	/* FPGA */
+#endif
+
+#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define BCR_ILCRA	(PA_BCR + 0)
+#define BCR_ILCRB	(PA_BCR + 2)
+#define BCR_ILCRC	(PA_BCR + 4)
+#define BCR_ILCRD	(PA_BCR + 6)
+#define BCR_ILCRE	(PA_BCR + 8)
+#define BCR_ILCRF	(PA_BCR + 10)
+#define BCR_ILCRG	(PA_BCR + 12)
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7709)
+#define INTC_IRR0       0xa4000004UL
+#define INTC_IRR1       0xa4000006UL
+#define INTC_IRR2       0xa4000008UL
+
+#define INTC_ICR0       0xfffffee0UL
+#define INTC_ICR1       0xa4000010UL
+#define INTC_ICR2       0xa4000012UL
+#define INTC_INTER      0xa4000014UL
+
+#define INTC_IPRC       0xa4000016UL
+#define INTC_IPRD       0xa4000018UL
+#define INTC_IPRE       0xa400001aUL
+
+#define IRQ0_IRQ        evt2irq(0x600)
+#define IRQ1_IRQ        evt2irq(0x620)
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define IRQ_STNIC	evt2irq(0x380)
+#define IRQ_CFCARD	evt2irq(0x3c0)
+#else
+#define IRQ_STNIC	evt2irq(0x340)
+#define IRQ_CFCARD	evt2irq(0x2e0)
+#endif
+
+/* SH Ether support (SH7710/SH7712) */
+/* Base address */
+#define SH_ETH0_BASE 0xA7000000
+#define SH_ETH1_BASE 0xA7000400
+/* PHY ID */
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+# define PHY_ID 0x00
+#elif defined(CONFIG_CPU_SUBTYPE_SH7712)
+# define PHY_ID 0x01
+#endif
+/* Ether IRQ */
+#define SH_ETH0_IRQ	evt2irq(0xc00)
+#define SH_ETH1_IRQ	evt2irq(0xc20)
+#define SH_TSU_IRQ	evt2irq(0xc40)
+
+void init_se_IRQ(void);
+
+#define __IO_PREFIX	se
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_HITACHI_SE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7206.h b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7206.h
new file mode 100644
index 0000000..cf19027
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7206.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SE7206_H
+#define __ASM_SH_SE7206_H
+
+#define PA_SMSC		0x30000000
+#define PA_MRSHPC	0x34000000
+#define PA_LED		0x31400000
+
+void init_se7206_IRQ(void);
+
+#define __IO_PREFIX	se7206
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_SE7206_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7343.h b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7343.h
new file mode 100644
index 0000000..107fb5f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7343.h
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_HITACHI_SE7343_H
+#define __ASM_SH_HITACHI_SE7343_H
+
+/*
+ * include/asm-sh/se/se7343.h
+ *
+ * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
+ *
+ * SH-Mobile SolutionEngine 7343 support
+ */
+#include <linux/sh_intc.h>
+
+/* Box specific addresses.  */
+
+/* Area 0 */
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte(Actually 2MB) */
+#define PA_FROM		0x00400000	/* Flash ROM */
+#define PA_FROM_SIZE	0x00400000	/* Flash size 4M byte */
+#define PA_SRAM		0x00800000	/* SRAM */
+#define PA_FROM_SIZE	0x00400000	/* SRAM size 4M byte */
+/* Area 1 */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+/* Area 2 */
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+/* Area 3 */
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+/* Area 4 */
+#define PA_PCIC		0x10000000	/* MR-SHPC-01 PCMCIA */
+#define PA_MRSHPC       0xb03fffe0      /* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1   0xb0400000      /* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2   0xb0500000      /* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO    0xb0600000      /* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+#define PA_LED		0xb0C00000	/* LED */
+#define LED_SHIFT       0
+#define PA_DIPSW	0xb0900000	/* Dip switch 31 */
+/* Area 5 */
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+/* Area 6 */
+#define PA_LCD1		0xb8000000
+#define PA_LCD2		0xb8800000
+
+#define PORT_PACR	0xA4050100
+#define PORT_PBCR	0xA4050102
+#define PORT_PCCR	0xA4050104
+#define PORT_PDCR	0xA4050106
+#define PORT_PECR	0xA4050108
+#define PORT_PFCR	0xA405010A
+#define PORT_PGCR	0xA405010C
+#define PORT_PHCR	0xA405010E
+#define PORT_PJCR	0xA4050110
+#define PORT_PKCR	0xA4050112
+#define PORT_PLCR	0xA4050114
+#define PORT_PMCR	0xA4050116
+#define PORT_PNCR	0xA4050118
+#define PORT_PQCR	0xA405011A
+#define PORT_PRCR	0xA405011C
+#define PORT_PSCR	0xA405011E
+#define PORT_PTCR	0xA4050140
+#define PORT_PUCR	0xA4050142
+#define PORT_PVCR	0xA4050144
+#define PORT_PWCR	0xA4050146
+#define PORT_PYCR	0xA4050148
+#define PORT_PZCR	0xA405014A
+
+#define PORT_PSELA	0xA405014C
+#define PORT_PSELB	0xA405014E
+#define PORT_PSELC	0xA4050150
+#define PORT_PSELD	0xA4050152
+#define PORT_PSELE	0xA4050154
+
+#define PORT_HIZCRA	0xA4050156
+#define PORT_HIZCRB	0xA4050158
+#define PORT_HIZCRC	0xA405015C
+
+#define PORT_DRVCR	0xA4050180
+
+#define PORT_PADR	0xA4050120
+#define PORT_PBDR	0xA4050122
+#define PORT_PCDR	0xA4050124
+#define PORT_PDDR	0xA4050126
+#define PORT_PEDR	0xA4050128
+#define PORT_PFDR	0xA405012A
+#define PORT_PGDR	0xA405012C
+#define PORT_PHDR	0xA405012E
+#define PORT_PJDR	0xA4050130
+#define PORT_PKDR	0xA4050132
+#define PORT_PLDR	0xA4050134
+#define PORT_PMDR	0xA4050136
+#define PORT_PNDR	0xA4050138
+#define PORT_PQDR	0xA405013A
+#define PORT_PRDR	0xA405013C
+#define PORT_PTDR	0xA4050160
+#define PORT_PUDR	0xA4050162
+#define PORT_PVDR	0xA4050164
+#define PORT_PWDR	0xA4050166
+#define PORT_PYDR	0xA4050168
+
+#define FPGA_IN		0xb1400000
+#define FPGA_OUT	0xb1400002
+
+#define IRQ0_IRQ        evt2irq(0x600)
+#define IRQ1_IRQ        evt2irq(0x620)
+#define IRQ4_IRQ        evt2irq(0x680)
+#define IRQ5_IRQ        evt2irq(0x6a0)
+
+#define SE7343_FPGA_IRQ_MRSHPC0	0
+#define SE7343_FPGA_IRQ_MRSHPC1	1
+#define SE7343_FPGA_IRQ_MRSHPC2	2
+#define SE7343_FPGA_IRQ_MRSHPC3	3
+#define SE7343_FPGA_IRQ_SMC	6	/* EXT_IRQ2 */
+#define SE7343_FPGA_IRQ_USB	8
+#define SE7343_FPGA_IRQ_UARTA	10
+#define SE7343_FPGA_IRQ_UARTB	11
+
+#define SE7343_FPGA_IRQ_NR	12
+
+struct irq_domain;
+
+/* arch/sh/boards/se/7343/irq.c */
+extern struct irq_domain *se7343_irq_domain;
+
+void init_7343se_IRQ(void);
+
+#endif  /* __ASM_SH_HITACHI_SE7343_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7721.h b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7721.h
new file mode 100644
index 0000000..eabd053
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7721.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * Hitachi UL SolutionEngine 7721 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#ifndef __ASM_SH_SE7721_H
+#define __ASM_SH_SE7721_H
+
+#include <linux/sh_intc.h>
+#include <asm/addrspace.h>
+
+/* Box specific addresses. */
+#define SE_AREA0_WIDTH	2		/* Area0: 32bit */
+#define PA_ROM		0xa0000000	/* EPROM */
+#define PA_ROM_SIZE	0x00200000	/* EPROM size 2M byte */
+#define PA_FROM		0xa1000000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x01000000	/* Flash-ROM size 16M byte */
+#define PA_EXT1		0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SDRAM	0xaC000000	/* SDRAM(Area3) 64MB */
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+
+#define PA_PERIPHERAL	0xB8000000
+
+#define PA_PCIC		PA_PERIPHERAL
+#define PA_MRSHPC	(PA_PERIPHERAL + 0x003fffe0)
+#define PA_MRSHPC_MW1	(PA_PERIPHERAL + 0x00400000)
+#define PA_MRSHPC_MW2	(PA_PERIPHERAL + 0x00500000)
+#define PA_MRSHPC_IO	(PA_PERIPHERAL + 0x00600000)
+#define MRSHPC_OPTION	(PA_MRSHPC + 6)
+#define MRSHPC_CSR	(PA_MRSHPC + 8)
+#define MRSHPC_ISR	(PA_MRSHPC + 10)
+#define MRSHPC_ICR	(PA_MRSHPC + 12)
+#define MRSHPC_CPWCR	(PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1	(PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1	(PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1	(PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2	(PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2	(PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2	(PA_MRSHPC + 26)
+#define MRSHPC_CDCR	(PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO	(PA_MRSHPC + 30)
+
+#define PA_LED		0xB6800000	/* 8bit LED */
+#define PA_FPGA		0xB7000000	/* FPGA base address */
+
+#define MRSHPC_IRQ0	evt2irq(0x340)
+
+#define FPGA_ILSR1	(PA_FPGA + 0x02)
+#define FPGA_ILSR2	(PA_FPGA + 0x03)
+#define FPGA_ILSR3	(PA_FPGA + 0x04)
+#define FPGA_ILSR4	(PA_FPGA + 0x05)
+#define FPGA_ILSR5	(PA_FPGA + 0x06)
+#define FPGA_ILSR6	(PA_FPGA + 0x07)
+#define FPGA_ILSR7	(PA_FPGA + 0x08)
+#define FPGA_ILSR8	(PA_FPGA + 0x09)
+
+void init_se7721_IRQ(void);
+
+#define __IO_PREFIX		se7721
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SE7721_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7722.h b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7722.h
new file mode 100644
index 0000000..637e7ac
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7722.h
@@ -0,0 +1,102 @@
+#ifndef __ASM_SH_SE7722_H
+#define __ASM_SH_SE7722_H
+
+/*
+ * linux/include/asm-sh/se7722.h
+ *
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/sh_intc.h>
+#include <asm/addrspace.h>
+
+/* Box specific addresses.  */
+#define SE_AREA0_WIDTH	4		/* Area0: 32bit */
+#define PA_ROM		0xa0000000	/* EPROM */
+#define PA_ROM_SIZE	0x00200000	/* EPROM size 2M byte */
+#define PA_FROM		0xa1000000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x01000000	/* Flash-ROM size 16M byte */
+#define PA_EXT1		0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SDRAM	0xaC000000	/* DDR-SDRAM(Area3) 64MB */
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+
+#define PA_PERIPHERAL	0xB0000000
+
+#define PA_PCIC         PA_PERIPHERAL		/* MR-SHPC-01 PCMCIA */
+#define PA_MRSHPC       (PA_PERIPHERAL + 0x003fffe0)    /* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1   (PA_PERIPHERAL + 0x00400000)    /* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2   (PA_PERIPHERAL + 0x00500000)    /* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO    (PA_PERIPHERAL + 0x00600000)    /* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define PA_LED		(PA_PERIPHERAL + 0x00800000)	/* 8bit LED */
+#define PA_FPGA		(PA_PERIPHERAL + 0x01800000)	/* FPGA base address */
+
+#define PA_LAN		(PA_AREA6_IO + 0)		/* SMC LAN91C111 */
+/* GPIO */
+#define FPGA_IN         0xb1840000UL
+#define FPGA_OUT        0xb1840004UL
+
+#define PORT_PECR       0xA4050108UL
+#define PORT_PJCR       0xA4050110UL
+#define PORT_PSELD      0xA4050154UL
+#define PORT_PSELB      0xA4050150UL
+
+#define PORT_PSELC      0xA4050152UL
+#define PORT_PKCR       0xA4050112UL
+#define PORT_PHCR       0xA405010EUL
+#define PORT_PLCR       0xA4050114UL
+#define PORT_PMCR       0xA4050116UL
+#define PORT_PRCR       0xA405011CUL
+#define PORT_PXCR       0xA4050148UL
+#define PORT_PSELA      0xA405014EUL
+#define PORT_PYCR       0xA405014AUL
+#define PORT_PZCR       0xA405014CUL
+#define PORT_HIZCRA     0xA4050158UL
+#define PORT_HIZCRC     0xA405015CUL
+
+/* IRQ */
+#define IRQ0_IRQ        evt2irq(0x600)
+#define IRQ1_IRQ        evt2irq(0x620)
+
+#define SE7722_FPGA_IRQ_USB	0 /* IRQ0 */
+#define SE7722_FPGA_IRQ_SMC	1 /* IRQ0 */
+#define SE7722_FPGA_IRQ_MRSHPC0	2 /* IRQ1 */
+#define SE7722_FPGA_IRQ_MRSHPC1	3 /* IRQ1 */
+#define SE7722_FPGA_IRQ_MRSHPC2	4 /* IRQ1 */
+#define SE7722_FPGA_IRQ_MRSHPC3	5 /* IRQ1 */
+#define SE7722_FPGA_IRQ_NR	6
+
+struct irq_domain;
+
+/* arch/sh/boards/se/7722/irq.c */
+extern struct irq_domain *se7722_irq_domain;
+
+void init_se7722_IRQ(void);
+
+#define __IO_PREFIX		se7722
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SE7722_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7724.h b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7724.h
new file mode 100644
index 0000000..be842dd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7724.h
@@ -0,0 +1,73 @@
+#ifndef __ASM_SH_SE7724_H
+#define __ASM_SH_SE7724_H
+
+/*
+ * linux/include/asm-sh/se7724.h
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Hitachi UL SolutionEngine 7724 Support.
+ *
+ * Based on se7722.h
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/sh_intc.h>
+#include <asm/addrspace.h>
+
+/* SH Eth */
+#define SH_ETH_ADDR	(0xA4600000)
+#define SH_ETH_MAHR	(SH_ETH_ADDR + 0x1C0)
+#define SH_ETH_MALR	(SH_ETH_ADDR + 0x1C8)
+
+#define PA_LED		(0xba203000)	/* 8bit LED */
+#define IRQ_MODE	(0xba200010)
+#define IRQ0_SR		(0xba200014)
+#define IRQ1_SR		(0xba200018)
+#define IRQ2_SR		(0xba20001c)
+#define IRQ0_MR		(0xba200020)
+#define IRQ1_MR		(0xba200024)
+#define IRQ2_MR		(0xba200028)
+
+/* IRQ */
+#define IRQ0_IRQ        evt2irq(0x600)
+#define IRQ1_IRQ        evt2irq(0x620)
+#define IRQ2_IRQ        evt2irq(0x640)
+
+/* Bits in IRQ012 registers */
+#define SE7724_FPGA_IRQ_BASE	220
+
+/* IRQ0 */
+#define IRQ0_BASE	SE7724_FPGA_IRQ_BASE
+#define IRQ0_KEY	(IRQ0_BASE + 12)
+#define IRQ0_RMII	(IRQ0_BASE + 13)
+#define IRQ0_SMC	(IRQ0_BASE + 14)
+#define IRQ0_MASK	0x7fff
+#define IRQ0_END	IRQ0_SMC
+/* IRQ1 */
+#define IRQ1_BASE	(IRQ0_END + 1)
+#define IRQ1_TS		(IRQ1_BASE + 0)
+#define IRQ1_MASK	0x0001
+#define IRQ1_END	IRQ1_TS
+/* IRQ2 */
+#define IRQ2_BASE	(IRQ1_END + 1)
+#define IRQ2_USB0	(IRQ1_BASE + 0)
+#define IRQ2_USB1	(IRQ1_BASE + 1)
+#define IRQ2_MASK	0x0003
+#define IRQ2_END	IRQ2_USB1
+
+#define SE7724_FPGA_IRQ_NR	(IRQ2_END - IRQ0_BASE)
+
+/* arch/sh/boards/se/7724/irq.c */
+void init_se7724_IRQ(void);
+
+#define __IO_PREFIX		se7724
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SE7724_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7751.h b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7751.h
new file mode 100644
index 0000000..ee5b5e6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7751.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_HITACHI_7751SE_H
+#define __ASM_SH_HITACHI_7751SE_H
+
+/*
+ * linux/include/asm-sh/hitachi_7751se.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine support
+
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/sh_intc.h>
+
+/* Box specific addresses.  */
+
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0x01000000	/* EPROM */
+#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0x12000000
+#define PA_EXT4_SIZE	0x02000000
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
+
+#define PA_DIPSW0	0xb9000000	/* Dip switch 5,6 */
+#define PA_DIPSW1	0xb9000002	/* Dip switch 7,8 */
+#define PA_LED		0xba000000	/* LED */
+#define	PA_BCR		0xbb000000	/* FPGA on the MS7751SE01 */
+
+#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
+#define MRSHPC_MODE     (PA_MRSHPC + 4)
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define BCR_ILCRA	(PA_BCR + 0)
+#define BCR_ILCRB	(PA_BCR + 2)
+#define BCR_ILCRC	(PA_BCR + 4)
+#define BCR_ILCRD	(PA_BCR + 6)
+#define BCR_ILCRE	(PA_BCR + 8)
+#define BCR_ILCRF	(PA_BCR + 10)
+#define BCR_ILCRG	(PA_BCR + 12)
+
+#define IRQ_79C973	evt2irq(0x3a0)
+
+void init_7751se_IRQ(void);
+
+#define __IO_PREFIX	sh7751se
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_HITACHI_7751SE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7780.h b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7780.h
new file mode 100644
index 0000000..bde357c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-se/mach/se7780.h
@@ -0,0 +1,109 @@
+#ifndef __ASM_SH_SE7780_H
+#define __ASM_SH_SE7780_H
+
+/*
+ * linux/include/asm-sh/se7780.h
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/sh_intc.h>
+#include <asm/addrspace.h>
+
+/* Box specific addresses.  */
+#define SE_AREA0_WIDTH	4		/* Area0: 32bit */
+#define PA_ROM		0xa0000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0xa1000000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x01000000	/* Flash-ROM size 16M byte */
+#define PA_EXT1		0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SM501	PA_EXT1		/* Graphic IC (SM501) */
+#define PA_SM501_SIZE	PA_EXT1_SIZE	/* Graphic IC (SM501) */
+#define PA_SDRAM	0xa8000000	/* DDR-SDRAM(Area2/3) 128MB */
+#define PA_SDRAM_SIZE	0x08000000
+
+#define PA_EXT4		0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+#define PA_EXT_FLASH	PA_EXT4		/* Expansion Flash-ROM */
+
+#define PA_PERIPHERAL	PA_AREA6_IO	/* SW6-6=ON */
+
+#define PA_LAN		(PA_PERIPHERAL + 0)		/* SMC LAN91C111 */
+#define PA_LED_DISP	(PA_PERIPHERAL + 0x02000000)	/* 8words LED Display */
+#define DISP_CHAR_RAM	(7 << 3)
+#define DISP_SEL0_ADDR	(DISP_CHAR_RAM + 0)
+#define DISP_SEL1_ADDR	(DISP_CHAR_RAM + 1)
+#define DISP_SEL2_ADDR	(DISP_CHAR_RAM + 2)
+#define DISP_SEL3_ADDR	(DISP_CHAR_RAM + 3)
+#define DISP_SEL4_ADDR	(DISP_CHAR_RAM + 4)
+#define DISP_SEL5_ADDR	(DISP_CHAR_RAM + 5)
+#define DISP_SEL6_ADDR	(DISP_CHAR_RAM + 6)
+#define DISP_SEL7_ADDR	(DISP_CHAR_RAM + 7)
+
+#define DISP_UDC_RAM	(5 << 3)
+#define PA_FPGA		(PA_PERIPHERAL + 0x03000000) /* FPGA base address */
+
+/* FPGA register address and bit */
+#define FPGA_SFTRST		(PA_FPGA + 0)	/* Soft reset register */
+#define FPGA_INTMSK1		(PA_FPGA + 2)	/* Interrupt Mask register 1 */
+#define FPGA_INTMSK2		(PA_FPGA + 4)	/* Interrupt Mask register 2 */
+#define FPGA_INTSEL1		(PA_FPGA + 6)	/* Interrupt select register 1 */
+#define FPGA_INTSEL2		(PA_FPGA + 8)	/* Interrupt select register 2 */
+#define FPGA_INTSEL3		(PA_FPGA + 10)	/* Interrupt select register 3 */
+#define FPGA_PCI_INTSEL1	(PA_FPGA + 12)	/* PCI Interrupt select register 1 */
+#define FPGA_PCI_INTSEL2	(PA_FPGA + 14)	/* PCI Interrupt select register 2 */
+#define FPGA_INTSET		(PA_FPGA + 16)	/* IRQ/IRL select register */
+#define FPGA_INTSTS1		(PA_FPGA + 18)	/* Interrupt status register 1 */
+#define FPGA_INTSTS2		(PA_FPGA + 20)	/* Interrupt status register 2 */
+#define FPGA_REQSEL		(PA_FPGA + 22)	/* REQ/GNT select register */
+#define FPGA_DBG_LED		(PA_FPGA + 32)	/* Debug LED(D-LED[8:1] */
+#define PA_LED			FPGA_DBG_LED
+#define FPGA_IVDRID		(PA_FPGA + 36)	/* iVDR ID Register */
+#define FPGA_IVDRPW		(PA_FPGA + 38)	/* iVDR Power ON Register */
+#define FPGA_MMCID		(PA_FPGA + 40)	/* MMC ID Register */
+
+/* FPGA INTSEL position */
+/* INTSEL1 */
+#define IRQPOS_SMC91CX          (0 * 4)
+#define IRQPOS_SM501            (1 * 4)
+/* INTSEL2 */
+#define IRQPOS_EXTINT1          (0 * 4)
+#define IRQPOS_EXTINT2          (1 * 4)
+#define IRQPOS_EXTINT3          (2 * 4)
+#define IRQPOS_EXTINT4          (3 * 4)
+/* INTSEL3 */
+#define IRQPOS_PCCPW            (0 * 4)
+
+/* IDE interrupt */
+#define IRQ_IDE0                evt2irq(0xa60) /* iVDR */
+
+/* SMC interrupt */
+#define SMC_IRQ                 evt2irq(0x300)
+
+/* SM501 interrupt */
+#define SM501_IRQ               evt2irq(0x200)
+
+/* interrupt pin */
+#define IRQPIN_EXTINT1          0 /* IRQ0 pin */
+#define IRQPIN_EXTINT2          1 /* IRQ1 pin */
+#define IRQPIN_EXTINT3          2 /* IRQ2 pin */
+#define IRQPIN_SMC91CX          3 /* IRQ3 pin */
+#define IRQPIN_EXTINT4          4 /* IRQ4 pin */
+#define IRQPIN_PCC0             5 /* IRQ5 pin */
+#define IRQPIN_PCC2             6 /* IRQ6 pin */
+#define IRQPIN_SM501            7 /* IRQ7 pin */
+#define IRQPIN_PCCPW            7 /* IRQ7 pin */
+
+/* arch/sh/boards/se/7780/irq.c */
+void init_se7780_IRQ(void);
+
+#define __IO_PREFIX		se7780
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SE7780_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-sh03/mach/io.h b/src/kernel/linux/v4.14/arch/sh/include/mach-sh03/mach/io.h
new file mode 100644
index 0000000..5eacdab
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-sh03/mach/io.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * include/asm-sh/sh03/io.h
+ *
+ * Copyright 2004 Interface Co.,Ltd. Saito.K
+ *
+ * IO functions for an Interface CTP/PCI-SH03
+ */
+
+#ifndef _ASM_SH_IO_SH03_H
+#define _ASM_SH_IO_SH03_H
+
+#include <linux/time.h>
+
+#define IRL0_IRQ	2
+#define IRL0_PRIORITY	13
+#define IRL1_IRQ	5
+#define IRL1_PRIORITY	10
+#define IRL2_IRQ	8
+#define IRL2_PRIORITY	7
+#define IRL3_IRQ	11
+#define IRL3_PRIORITY	4
+
+void heartbeat_sh03(void);
+
+#endif /* _ASM_SH_IO_SH03_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-sh03/mach/sh03.h b/src/kernel/linux/v4.14/arch/sh/include/mach-sh03/mach/sh03.h
new file mode 100644
index 0000000..4ced684
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-sh03/mach/sh03.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SH03_H
+#define __ASM_SH_SH03_H
+
+/*
+ * linux/include/asm-sh/sh03/sh03.h
+ *
+ * Copyright (C) 2004  Interface Co., Ltd. Saito.K
+ *
+ * Interface CTP/PCI-SH03 support
+ */
+
+#define PA_PCI_IO       (0xbe240000)    /* PCI I/O space */
+#define PA_PCI_MEM      (0xbd000000)    /* PCI MEM space */
+
+#define PCIPAR          (0xa4000cf8)    /* PCI Config address */
+#define PCIPDR          (0xa4000cfc)    /* PCI Config data    */
+
+#endif  /* __ASM_SH_SH03_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-x3proto/mach/hardware.h b/src/kernel/linux/v4.14/arch/sh/include/mach-x3proto/mach/hardware.h
new file mode 100644
index 0000000..57ea4a5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-x3proto/mach/hardware.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_X3PROTO_HARDWARE_H
+#define __MACH_X3PROTO_HARDWARE_H
+
+struct gpio_chip;
+
+/* arch/sh/boards/mach-x3proto/gpio.c */
+int x3proto_gpio_setup(void);
+extern struct gpio_chip x3proto_gpio_chip;
+
+#define NR_BASEBOARD_GPIOS	16
+
+#endif /* __MACH_X3PROTO_HARDWARE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/mach-x3proto/mach/ilsel.h b/src/kernel/linux/v4.14/arch/sh/include/mach-x3proto/mach/ilsel.h
new file mode 100644
index 0000000..47aeb4b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/mach-x3proto/mach/ilsel.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_ILSEL_H
+#define __ASM_SH_ILSEL_H
+
+typedef enum {
+	ILSEL_NONE,
+	ILSEL_LAN,
+	ILSEL_USBH_I,
+	ILSEL_USBH_S,
+	ILSEL_USBH_V,
+	ILSEL_RTC,
+	ILSEL_USBP_I,
+	ILSEL_USBP_S,
+	ILSEL_USBP_V,
+	ILSEL_KEY,
+
+	/*
+	 * ILSEL Aliases - corner cases for interleaved level tables.
+	 *
+	 * Someone thought this was a good idea and less hassle than
+	 * demuxing a shared vector, really.
+	 */
+
+	/* ILSEL0 and 2 */
+	ILSEL_FPGA0,
+	ILSEL_FPGA1,
+	ILSEL_EX1,
+	ILSEL_EX2,
+	ILSEL_EX3,
+	ILSEL_EX4,
+
+	/* ILSEL1 and 3 */
+	ILSEL_FPGA2 = ILSEL_FPGA0,
+	ILSEL_FPGA3 = ILSEL_FPGA1,
+	ILSEL_EX5 = ILSEL_EX1,
+	ILSEL_EX6 = ILSEL_EX2,
+	ILSEL_EX7 = ILSEL_EX3,
+	ILSEL_EX8 = ILSEL_EX4,
+} ilsel_source_t;
+
+/* arch/sh/boards/renesas/x3proto/ilsel.c */
+int ilsel_enable(ilsel_source_t set);
+int ilsel_enable_fixed(ilsel_source_t set, unsigned int level);
+void ilsel_disable(unsigned int irq);
+
+#endif /* __ASM_SH_ILSEL_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/Kbuild b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/Kbuild
new file mode 100644
index 0000000..e285313
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/Kbuild
@@ -0,0 +1,22 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
+generic-y += bitsperlong.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ipcbuf.h
+generic-y += kvm_para.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += poll.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += shmbuf.h
+generic-y += siginfo.h
+generic-y += socket.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += ucontext.h
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/auxvec.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/auxvec.h
new file mode 100644
index 0000000..8eb47ed
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/auxvec.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_SH_AUXVEC_H
+#define __ASM_SH_AUXVEC_H
+
+/*
+ * Architecture-neutral AT_ values in 0-17, leave some room
+ * for more of them.
+ */
+
+/*
+ * This entry gives some information about the FPU initialization
+ * performed by the kernel.
+ */
+#define AT_FPUCW		18	/* Used FPU control word.  */
+
+#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__)
+/*
+ * Only define this in the vsyscall case, the entry point to
+ * the vsyscall page gets placed here. The kernel will attempt
+ * to build a gate VMA we don't care about otherwise..
+ */
+#define AT_SYSINFO_EHDR		33
+#endif
+
+/*
+ * More complete cache descriptions than AT_[DIU]CACHEBSIZE.  If the
+ * value is -1, then the cache doesn't exist.  Otherwise:
+ *
+ *    bit 0-3:	  Cache set-associativity; 0 means fully associative.
+ *    bit 4-7:	  Log2 of cacheline size.
+ *    bit 8-31:	  Size of the entire cache >> 8.
+ */
+#define AT_L1I_CACHESHAPE	34
+#define AT_L1D_CACHESHAPE	35
+#define AT_L2_CACHESHAPE	36
+
+#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
+
+#endif /* __ASM_SH_AUXVEC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/byteorder.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/byteorder.h
new file mode 100644
index 0000000..e27d6da
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/byteorder.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_SH_BYTEORDER_H
+#define __ASM_SH_BYTEORDER_H
+
+#ifdef __LITTLE_ENDIAN__
+#include <linux/byteorder/little_endian.h>
+#else
+#include <linux/byteorder/big_endian.h>
+#endif
+
+#endif /* __ASM_SH_BYTEORDER_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/cachectl.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/cachectl.h
new file mode 100644
index 0000000..79c5663
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/cachectl.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _SH_CACHECTL_H
+#define _SH_CACHECTL_H
+
+/* Definitions for the cacheflush system call.  */
+
+#define CACHEFLUSH_D_INVAL	0x1	/* invalidate (without write back) */
+#define CACHEFLUSH_D_WB		0x2	/* write back (without invalidate) */
+#define CACHEFLUSH_D_PURGE	0x3	/* writeback and invalidate */
+
+#define CACHEFLUSH_I		0x4
+
+/*
+ * Options for cacheflush system call
+ */
+#define ICACHE	CACHEFLUSH_I		/* flush instruction cache */
+#define DCACHE	CACHEFLUSH_D_PURGE	/* writeback and flush data cache */
+#define BCACHE	(ICACHE|DCACHE)		/* flush both caches */
+
+#endif /* _SH_CACHECTL_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/cpu-features.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/cpu-features.h
new file mode 100644
index 0000000..6de5f65
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/cpu-features.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_SH_CPU_FEATURES_H
+#define __ASM_SH_CPU_FEATURES_H
+
+/*
+ * Processor flags
+ *
+ * Note: When adding a new flag, keep cpu_flags[] in
+ * arch/sh/kernel/setup.c in sync so symbolic name
+ * mapping of the processor flags has a chance of being
+ * reasonably accurate.
+ *
+ * These flags are also available through the ELF
+ * auxiliary vector as AT_HWCAP.
+ */
+#define CPU_HAS_FPU		0x0001	/* Hardware FPU support */
+#define CPU_HAS_P2_FLUSH_BUG	0x0002	/* Need to flush the cache in P2 area */
+#define CPU_HAS_MMU_PAGE_ASSOC	0x0004	/* SH3: TLB way selection bit support */
+#define CPU_HAS_DSP		0x0008	/* SH-DSP: DSP support */
+#define CPU_HAS_PERF_COUNTER	0x0010	/* Hardware performance counters */
+#define CPU_HAS_PTEA		0x0020	/* PTEA register */
+#define CPU_HAS_LLSC		0x0040	/* movli.l/movco.l */
+#define CPU_HAS_L2_CACHE	0x0080	/* Secondary cache / URAM */
+#define CPU_HAS_OP32		0x0100	/* 32-bit instruction support */
+#define CPU_HAS_PTEAEX		0x0200	/* PTE ASID Extension support */
+#define CPU_HAS_CAS_L		0x0400	/* cas.l atomic compare-and-swap */
+
+#endif /* __ASM_SH_CPU_FEATURES_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/hw_breakpoint.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/hw_breakpoint.h
new file mode 100644
index 0000000..043dd4b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/hw_breakpoint.h
@@ -0,0 +1,5 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * There isn't anything here anymore, but the file must not be empty or patch
+ * will delete it.
+ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/ioctls.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/ioctls.h
new file mode 100644
index 0000000..cc62f6f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/ioctls.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_SH_IOCTLS_H
+#define __ASM_SH_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+
+#define TCGETA		0x80127417	/* _IOR('t', 23, struct termio) */
+#define TCSETA		0x40127418	/* _IOW('t', 24, struct termio) */
+#define TCSETAW		0x40127419	/* _IOW('t', 25, struct termio) */
+#define TCSETAF		0x4012741C	/* _IOW('t', 28, struct termio) */
+
+#define TCSBRK		_IO('t', 29)
+#define TCXONC		_IO('t', 30)
+#define TCFLSH		_IO('t', 31)
+
+#define TIOCSWINSZ	0x40087467	/* _IOW('t', 103, struct winsize) */
+#define TIOCGWINSZ	0x80087468	/* _IOR('t', 104, struct winsize) */
+#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
+#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
+#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
+
+#define TIOCSPGRP	_IOW('t', 118, int)
+#define TIOCGPGRP	_IOR('t', 119, int)
+
+#define TIOCEXCL	_IO('T', 12) /* 0x540C */
+#define TIOCNXCL	_IO('T', 13) /* 0x540D */
+#define TIOCSCTTY	_IO('T', 14) /* 0x540E */
+
+#define TIOCSTI		_IOW('T', 18, char) /* 0x5412 */
+#define TIOCMGET	_IOR('T', 21, unsigned int) /* 0x5415 */
+#define TIOCMBIS	_IOW('T', 22, unsigned int) /* 0x5416 */
+#define TIOCMBIC	_IOW('T', 23, unsigned int) /* 0x5417 */
+#define TIOCMSET	_IOW('T', 24, unsigned int) /* 0x5418 */
+# define TIOCM_LE	0x001
+# define TIOCM_DTR	0x002
+# define TIOCM_RTS	0x004
+# define TIOCM_ST	0x008
+# define TIOCM_SR	0x010
+# define TIOCM_CTS	0x020
+# define TIOCM_CAR	0x040
+# define TIOCM_RNG	0x080
+# define TIOCM_DSR	0x100
+# define TIOCM_CD	TIOCM_CAR
+# define TIOCM_RI	TIOCM_RNG
+
+#define TIOCGSOFTCAR	_IOR('T', 25, unsigned int) /* 0x5419 */
+#define TIOCSSOFTCAR	_IOW('T', 26, unsigned int) /* 0x541A */
+#define TIOCLINUX	_IOW('T', 28, char) /* 0x541C */
+#define TIOCCONS	_IO('T', 29) /* 0x541D */
+#define TIOCGSERIAL	0x803C541E	/* _IOR('T', 30, struct serial_struct) 0x541E */
+#define TIOCSSERIAL	0x403C541F	/* _IOW('T', 31, struct serial_struct) 0x541F */
+#define TIOCPKT		_IOW('T', 32, int) /* 0x5420 */
+# define TIOCPKT_DATA		 0
+# define TIOCPKT_FLUSHREAD	 1
+# define TIOCPKT_FLUSHWRITE	 2
+# define TIOCPKT_STOP		 4
+# define TIOCPKT_START		 8
+# define TIOCPKT_NOSTOP		16
+# define TIOCPKT_DOSTOP		32
+# define TIOCPKT_IOCTL		64
+
+
+#define TIOCNOTTY	_IO('T', 34) /* 0x5422 */
+#define TIOCSETD	_IOW('T', 35, int) /* 0x5423 */
+#define TIOCGETD	_IOR('T', 36, int) /* 0x5424 */
+#define TCSBRKP		_IOW('T', 37, int) /* 0x5425 */	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	_IO('T', 39) /* 0x5427 */ /* BSD compatibility */
+#define TIOCCBRK	_IO('T', 40) /* 0x5428 */ /* BSD compatibility */
+#define TIOCGSID	_IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */
+#define TCGETS2		_IOR('T', 42, struct termios2)
+#define TCSETS2		_IOW('T', 43, struct termios2)
+#define TCSETSW2	_IOW('T', 44, struct termios2)
+#define TCSETSF2	_IOW('T', 45, struct termios2)
+#define TIOCGRS485	_IOR('T', 46, struct serial_rs485)
+#define TIOCSRS485	_IOWR('T', 47, struct serial_rs485)
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
+#define TIOCVHANGUP	_IO('T', 0x37)
+#define TIOCGPKT	_IOR('T', 0x38, int) /* Get packet mode state */
+#define TIOCGPTLCK	_IOR('T', 0x39, int) /* Get Pty lock state */
+#define TIOCGEXCL	_IOR('T', 0x40, int) /* Get exclusive mode state */
+#define TIOCGPTPEER	_IO('T', 0x41) /* Safely open the slave */
+
+#define TIOCSERCONFIG	_IO('T', 83) /* 0x5453 */
+#define TIOCSERGWILD	_IOR('T', 84,  int) /* 0x5454 */
+#define TIOCSERSWILD	_IOW('T', 85,  int) /* 0x5455 */
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x80d85458	/* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */
+#define TIOCSERGETLSR   _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */
+  /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+# define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#define TIOCSERGETMULTI 0x80A8545A	/* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */
+#define TIOCSERSETMULTI 0x40A8545B	/* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */
+
+#define TIOCMIWAIT	_IO('T', 92) /* 0x545C */	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+
+#endif /* __ASM_SH_IOCTLS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/posix_types.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/posix_types.h
new file mode 100644
index 0000000..2644fdd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/posix_types.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __KERNEL__
+# ifdef __SH5__
+#  include <asm/posix_types_64.h>
+# else
+#  include <asm/posix_types_32.h>
+# endif
+#endif /* __KERNEL__ */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/posix_types_32.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/posix_types_32.h
new file mode 100644
index 0000000..ea0f51d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/posix_types_32.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_SH_POSIX_TYPES_32_H
+#define __ASM_SH_POSIX_TYPES_32_H
+
+typedef unsigned short	__kernel_mode_t;
+#define __kernel_mode_t __kernel_mode_t
+typedef unsigned short	__kernel_ipc_pid_t;
+#define __kernel_ipc_pid_t __kernel_ipc_pid_t
+typedef unsigned short	__kernel_uid_t;
+#define __kernel_uid_t __kernel_uid_t
+typedef unsigned short	__kernel_gid_t;
+#define __kernel_gid_t __kernel_gid_t
+
+typedef unsigned short	__kernel_old_uid_t;
+#define __kernel_old_uid_t __kernel_old_uid_t
+typedef unsigned short	__kernel_old_gid_t;
+#define __kernel_old_gid_t __kernel_old_gid_t
+typedef unsigned short	__kernel_old_dev_t;
+#define __kernel_old_dev_t __kernel_old_dev_t
+
+#include <asm-generic/posix_types.h>
+
+#endif /* __ASM_SH_POSIX_TYPES_32_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/posix_types_64.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/posix_types_64.h
new file mode 100644
index 0000000..3a9128d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/posix_types_64.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_SH_POSIX_TYPES_64_H
+#define __ASM_SH_POSIX_TYPES_64_H
+
+typedef unsigned short	__kernel_mode_t;
+#define __kernel_mode_t __kernel_mode_t
+typedef unsigned short	__kernel_ipc_pid_t;
+#define __kernel_ipc_pid_t __kernel_ipc_pid_t
+typedef unsigned short	__kernel_uid_t;
+#define __kernel_uid_t __kernel_uid_t
+typedef unsigned short	__kernel_gid_t;
+#define __kernel_gid_t __kernel_gid_t
+typedef long unsigned int	__kernel_size_t;
+#define __kernel_size_t __kernel_size_t
+typedef int		__kernel_ssize_t;
+#define __kernel_ssize_t __kernel_ssize_t
+typedef int		__kernel_ptrdiff_t;
+#define __kernel_ptrdiff_t __kernel_ptrdiff_t
+
+typedef unsigned short	__kernel_old_uid_t;
+#define __kernel_old_uid_t __kernel_old_uid_t
+typedef unsigned short	__kernel_old_gid_t;
+#define __kernel_old_gid_t __kernel_old_gid_t
+typedef unsigned short	__kernel_old_dev_t;
+#define __kernel_old_dev_t __kernel_old_dev_t
+
+#include <asm-generic/posix_types.h>
+
+#endif /* __ASM_SH_POSIX_TYPES_64_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/ptrace.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..4ec9c2b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/ptrace.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ */
+#ifndef _UAPI__ASM_SH_PTRACE_H
+#define _UAPI__ASM_SH_PTRACE_H
+
+
+#define PTRACE_GETREGS		12	/* General registers */
+#define PTRACE_SETREGS		13
+
+#define PTRACE_GETFPREGS	14	/* FPU registers */
+#define PTRACE_SETFPREGS	15
+
+#define PTRACE_GETFDPIC		31	/* get the ELF fdpic loadmap address */
+
+#define PTRACE_GETFDPIC_EXEC	0	/* [addr] request the executable loadmap */
+#define PTRACE_GETFDPIC_INTERP	1	/* [addr] request the interpreter loadmap */
+
+#define	PTRACE_GETDSPREGS	55	/* DSP registers */
+#define	PTRACE_SETDSPREGS	56
+
+#define PT_TEXT_END_ADDR	240
+#define PT_TEXT_ADDR		244	/* &(struct user)->start_code */
+#define PT_DATA_ADDR		248	/* &(struct user)->start_data */
+#define PT_TEXT_LEN		252
+
+#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
+#include <asm/ptrace_64.h>
+#else
+#include <asm/ptrace_32.h>
+#endif
+
+
+#endif /* _UAPI__ASM_SH_PTRACE_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/ptrace_32.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/ptrace_32.h
new file mode 100644
index 0000000..dc8a260
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/ptrace_32.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI__ASM_SH_PTRACE_32_H
+#define _UAPI__ASM_SH_PTRACE_32_H
+
+/*
+ * GCC defines register number like this:
+ * -----------------------------
+ *	 0 - 15 are integer registers
+ *	17 - 22 are control/special registers
+ *	24 - 39 fp registers
+ *	40 - 47 xd registers
+ *	48 -    fpscr register
+ * -----------------------------
+ *
+ * We follows above, except:
+ *	16 --- program counter (PC)
+ *	22 --- syscall #
+ *	23 --- floating point communication register
+ */
+#define REG_REG0	 0
+#define REG_REG15	15
+
+#define REG_PC		16
+
+#define REG_PR		17
+#define REG_SR		18
+#define REG_GBR		19
+#define REG_MACH	20
+#define REG_MACL	21
+
+#define REG_SYSCALL	22
+
+#define REG_FPREG0	23
+#define REG_FPREG15	38
+#define REG_XFREG0	39
+#define REG_XFREG15	54
+
+#define REG_FPSCR	55
+#define REG_FPUL	56
+
+/*
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_regs {
+	unsigned long regs[16];
+	unsigned long pc;
+	unsigned long pr;
+	unsigned long sr;
+	unsigned long gbr;
+	unsigned long mach;
+	unsigned long macl;
+	long tra;
+};
+
+/*
+ * This struct defines the way the DSP registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_dspregs {
+	unsigned long	a1;
+	unsigned long	a0g;
+	unsigned long	a1g;
+	unsigned long	m0;
+	unsigned long	m1;
+	unsigned long	a0;
+	unsigned long	x0;
+	unsigned long	x1;
+	unsigned long	y0;
+	unsigned long	y1;
+	unsigned long	dsr;
+	unsigned long	rs;
+	unsigned long	re;
+	unsigned long	mod;
+};
+
+
+#endif /* _UAPI__ASM_SH_PTRACE_32_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/ptrace_64.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/ptrace_64.h
new file mode 100644
index 0000000..a6f84eb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/ptrace_64.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI__ASM_SH_PTRACE_64_H
+#define _UAPI__ASM_SH_PTRACE_64_H
+
+struct pt_regs {
+	unsigned long long pc;
+	unsigned long long sr;
+	long long syscall_nr;
+	unsigned long long regs[63];
+	unsigned long long tregs[8];
+	unsigned long long pad[2];
+};
+
+
+#endif /* _UAPI__ASM_SH_PTRACE_64_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/setup.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/setup.h
new file mode 100644
index 0000000..552df83
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/setup.h
@@ -0,0 +1 @@
+#include <asm-generic/setup.h>
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/sigcontext.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/sigcontext.h
new file mode 100644
index 0000000..d2b7e4f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/sigcontext.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_SH_SIGCONTEXT_H
+#define __ASM_SH_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long	oldmask;
+
+#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
+	/* CPU registers */
+	unsigned long long sc_regs[63];
+	unsigned long long sc_tregs[8];
+	unsigned long long sc_pc;
+	unsigned long long sc_sr;
+
+	/* FPU registers */
+	unsigned long long sc_fpregs[32];
+	unsigned int sc_fpscr;
+	unsigned int sc_fpvalid;
+#else
+	/* CPU registers */
+	unsigned long sc_regs[16];
+	unsigned long sc_pc;
+	unsigned long sc_pr;
+	unsigned long sc_sr;
+	unsigned long sc_gbr;
+	unsigned long sc_mach;
+	unsigned long sc_macl;
+
+	/* FPU registers */
+	unsigned long sc_fpregs[16];
+	unsigned long sc_xfpregs[16];
+	unsigned int sc_fpscr;
+	unsigned int sc_fpul;
+	unsigned int sc_ownedfp;
+#endif
+};
+
+#endif /* __ASM_SH_SIGCONTEXT_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/signal.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/signal.h
new file mode 100644
index 0000000..97299da
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/signal.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_SH_SIGNAL_H
+#define __ASM_SH_SIGNAL_H
+
+#define SA_RESTORER	0x04000000
+
+#include <asm-generic/signal.h>
+
+#ifndef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+#endif
+
+#endif /* __ASM_SH_SIGNAL_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/sockios.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/sockios.h
new file mode 100644
index 0000000..17313d2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/sockios.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_SH_SOCKIOS_H
+#define __ASM_SH_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOGETOWN	_IOR('f', 123, int)
+#define FIOSETOWN 	_IOW('f', 124, int)
+
+#define SIOCATMARK	_IOR('s', 7, int)
+#define SIOCSPGRP	_IOW('s', 8, pid_t)
+#define SIOCGPGRP	_IOR('s', 9, pid_t)
+
+#define SIOCGSTAMP	_IOR('s', 100, struct timeval) /* Get stamp (timeval) */
+#define SIOCGSTAMPNS	_IOR('s', 101, struct timespec) /* Get stamp (timespec) */
+#endif /* __ASM_SH_SOCKIOS_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/stat.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/stat.h
new file mode 100644
index 0000000..659b87c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/stat.h
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_SH_STAT_H
+#define __ASM_SH_STAT_H
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
+struct stat {
+	unsigned short st_dev;
+	unsigned short __pad1;
+	unsigned long st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned short __pad2;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned short	st_dev;
+	unsigned char	__pad0[10];
+
+	unsigned long	st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned short	st_rdev;
+	unsigned char	__pad3[10];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
+	unsigned long	__pad4;		/* future possible st_blocks high bits */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;	/* will be high 32 bits of ctime someday */
+
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+#else
+struct stat {
+	unsigned long  st_dev;
+	unsigned long  st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned long  st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char	__pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long	__st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char	__pad3[4];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	unsigned long long	st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+#define STAT_HAVE_NSEC 1
+#endif
+
+#endif /* __ASM_SH_STAT_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/swab.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/swab.h
new file mode 100644
index 0000000..f0b0215
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/swab.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_SH_SWAB_H
+#define __ASM_SH_SWAB_H
+
+/*
+ * Copyright (C) 1999  Niibe Yutaka
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ */
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm-generic/swab.h>
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+	__asm__(
+#ifdef __SH5__
+		"byterev	%1, %0\n\t"
+		"shari		%0, 32, %0"
+#else
+		"swap.b		%1, %0\n\t"
+		"swap.w		%0, %0\n\t"
+		"swap.b		%0, %0"
+#endif
+		: "=r" (x)
+		: "r" (x));
+
+	return x;
+}
+#define __arch_swab32 __arch_swab32
+
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+{
+	__asm__(
+#ifdef __SH5__
+		"byterev	%1, %0\n\t"
+		"shari		%0, 32, %0"
+#else
+		"swap.b		%1, %0"
+#endif
+		: "=r" (x)
+		:  "r" (x));
+
+	return x;
+}
+#define __arch_swab16 __arch_swab16
+
+static inline __u64 __arch_swab64(__u64 val)
+{
+	union {
+		struct { __u32 a,b; } s;
+		__u64 u;
+	} v, w;
+	v.u = val;
+	w.s.b = __arch_swab32(v.s.a);
+	w.s.a = __arch_swab32(v.s.b);
+	return w.u;
+}
+#define __arch_swab64 __arch_swab64
+
+#endif /* __ASM_SH_SWAB_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/types.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/types.h
new file mode 100644
index 0000000..b9e79bc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/types.h
@@ -0,0 +1 @@
+#include <asm-generic/types.h>
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/unistd.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/unistd.h
new file mode 100644
index 0000000..9e0b4e5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/unistd.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __KERNEL__
+# ifdef __SH5__
+#  include <asm/unistd_64.h>
+# else
+#  include <asm/unistd_32.h>
+# endif
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/unistd_32.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/unistd_32.h
new file mode 100644
index 0000000..58f04cf
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/unistd_32.h
@@ -0,0 +1,401 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_SH_UNISTD_32_H
+#define __ASM_SH_UNISTD_32_H
+
+/*
+ * Copyright (C) 1999  Niibe Yutaka
+ */
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+				 /* 17 was sys_break */
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+				 /* 31 was sys_stty */
+				 /* 32 was sys_gtty */
+#define __NR_access		 33
+#define __NR_nice		 34
+				 /* 35 was sys_ftime */
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+				 /* 44 was sys_prof */
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+				 /* 53 was sys_lock */
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+				 /* 56 was sys_mpx */
+#define __NR_setpgid		 57
+				 /* 58 was sys_ulimit */
+				 /* 59 was sys_olduname */
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+				 /* 82 was sys_oldselect */
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+				 /* 98 was sys_profil */
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+				/* 101 was sys_ioperm */
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+				/* 110 was sys_iopl */
+#define __NR_vhangup		111
+				/* 112 was sys_idle */
+				/* 113 was sys_vm86old */
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_cacheflush		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+				/* 127 was sys_create_module */
+#define __NR_init_module	128
+#define __NR_delete_module	129
+				/* 130 was sys_get_kernel_syms */
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+				/* 137 was sys_afs_syscall */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+				/* 166 was sys_vm86 */
+				/* 167 was sys_query_module */
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+				/* 188 reserved for sys_getpmsg */
+				/* 189 reserved for sys_putpmsg */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+				/* 222 is reserved for tux */
+				/* 223 is unused */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+				/* 243 is reserved for set_thread_area */
+				/* 244 is reserved for get_thread_area */
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_fadvise64		250
+				/* 251 is unused */
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_epoll_create	254
+#define __NR_epoll_ctl		255
+#define __NR_epoll_wait		256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+				/* 273 is reserved for vserver */
+#define __NR_mbind              274
+#define __NR_get_mempolicy      275
+#define __NR_set_mempolicy      276
+#define __NR_mq_open            277
+#define __NR_mq_unlink          (__NR_mq_open+1)
+#define __NR_mq_timedsend       (__NR_mq_open+2)
+#define __NR_mq_timedreceive    (__NR_mq_open+3)
+#define __NR_mq_notify          (__NR_mq_open+4)
+#define __NR_mq_getsetattr      (__NR_mq_open+5)
+#define __NR_kexec_load		283
+#define __NR_waitid		284
+#define __NR_add_key		285
+#define __NR_request_key	286
+#define __NR_keyctl		287
+#define __NR_ioprio_set		288
+#define __NR_ioprio_get		289
+#define __NR_inotify_init	290
+#define __NR_inotify_add_watch	291
+#define __NR_inotify_rm_watch	292
+				/* 293 is unused */
+#define __NR_migrate_pages	294
+#define __NR_openat		295
+#define __NR_mkdirat		296
+#define __NR_mknodat		297
+#define __NR_fchownat		298
+#define __NR_futimesat		299
+#define __NR_fstatat64		300
+#define __NR_unlinkat		301
+#define __NR_renameat		302
+#define __NR_linkat		303
+#define __NR_symlinkat		304
+#define __NR_readlinkat		305
+#define __NR_fchmodat		306
+#define __NR_faccessat		307
+#define __NR_pselect6		308
+#define __NR_ppoll		309
+#define __NR_unshare		310
+#define __NR_set_robust_list	311
+#define __NR_get_robust_list	312
+#define __NR_splice		313
+#define __NR_sync_file_range	314
+#define __NR_tee		315
+#define __NR_vmsplice		316
+#define __NR_move_pages		317
+#define __NR_getcpu		318
+#define __NR_epoll_pwait	319
+#define __NR_utimensat		320
+#define __NR_signalfd		321
+#define __NR_timerfd_create	322
+#define __NR_eventfd		323
+#define __NR_fallocate		324
+#define __NR_timerfd_settime	325
+#define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
+#define __NR_preadv		333
+#define __NR_pwritev		334
+#define __NR_rt_tgsigqueueinfo	335
+#define __NR_perf_event_open	336
+#define __NR_fanotify_init	337
+#define __NR_fanotify_mark	338
+#define __NR_prlimit64		339
+
+/* Non-multiplexed socket family */
+#define __NR_socket		340
+#define __NR_bind		341
+#define __NR_connect		342
+#define __NR_listen		343
+#define __NR_accept		344
+#define __NR_getsockname	345
+#define __NR_getpeername	346
+#define __NR_socketpair		347
+#define __NR_send		348
+#define __NR_sendto		349
+#define __NR_recv		350
+#define __NR_recvfrom		351
+#define __NR_shutdown		352
+#define __NR_setsockopt		353
+#define __NR_getsockopt		354
+#define __NR_sendmsg		355
+#define __NR_recvmsg		356
+#define __NR_recvmmsg		357
+#define __NR_accept4		358
+#define __NR_name_to_handle_at	359
+#define __NR_open_by_handle_at	360
+#define __NR_clock_adjtime	361
+#define __NR_syncfs		362
+#define __NR_sendmmsg		363
+#define __NR_setns		364
+#define __NR_process_vm_readv	365
+#define __NR_process_vm_writev	366
+#define __NR_kcmp		367
+#define __NR_finit_module	368
+#define __NR_sched_getattr	369
+#define __NR_sched_setattr	370
+#define __NR_renameat2		371
+#define __NR_seccomp		372
+#define __NR_getrandom		373
+#define __NR_memfd_create	374
+#define __NR_bpf		375
+#define __NR_execveat		376
+#define __NR_userfaultfd	377
+#define __NR_membarrier		378
+#define __NR_mlock2		379
+#define __NR_copy_file_range	380
+#define __NR_preadv2		381
+#define __NR_pwritev2		382
+
+#define NR_syscalls 383
+
+#endif /* __ASM_SH_UNISTD_32_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/unistd_64.h b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/unistd_64.h
new file mode 100644
index 0000000..6f809a5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/include/uapi/asm/unistd_64.h
@@ -0,0 +1,421 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_SH_UNISTD_64_H
+#define __ASM_SH_UNISTD_64_H
+
+/*
+ * include/asm-sh/unistd_64.h
+ *
+ * This file contains the system call numbers.
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003 - 2007 Paul Mundt
+ * Copyright (C) 2004  Sean McGoogan
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+				 /* 17 was sys_break */
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+				 /* 31 was sys_stty */
+				 /* 32 was sys_gtty */
+#define __NR_access		 33
+#define __NR_nice		 34
+				 /* 35 was sys_ftime */
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+				 /* 44 was sys_prof */
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+				 /* 53 was sys_lock */
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+				 /* 56 was sys_mpx */
+#define __NR_setpgid		 57
+				 /* 58 was sys_ulimit */
+				 /* 59 was sys_olduname */
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+				 /* 82 was sys_select */
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+				 /* 98 was sys_profil */
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+				/* 101 was sys_ioperm */
+#define __NR_socketcall		102	/* old implementation of socket systemcall */
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+				/* 110 was sys_iopl */
+#define __NR_vhangup		111
+				/* 112 was sys_idle */
+				/* 113 was sys_vm86old */
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_cacheflush		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+				/* 127 was sys_create_module */
+#define __NR_init_module	128
+#define __NR_delete_module	129
+				/* 130 was sys_get_kernel_syms */
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+				/* 137 was sys_afs_syscall */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+				/* 166 was sys_vm86 */
+				/* 167 was sys_query_module */
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+				/* 188 reserved for getpmsg */
+				/* 189 reserved for putpmsg */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+
+/* Non-multiplexed socket family */
+#define __NR_socket		220
+#define __NR_bind		221
+#define __NR_connect		222
+#define __NR_listen		223
+#define __NR_accept		224
+#define __NR_getsockname	225
+#define __NR_getpeername	226
+#define __NR_socketpair		227
+#define __NR_send		228
+#define __NR_sendto		229
+#define __NR_recv		230
+#define __NR_recvfrom		231
+#define __NR_shutdown		232
+#define __NR_setsockopt		233
+#define __NR_getsockopt		234
+#define __NR_sendmsg		235
+#define __NR_recvmsg		236
+
+/* Non-multiplexed IPC family */
+#define __NR_semop		237
+#define __NR_semget		238
+#define __NR_semctl		239
+#define __NR_msgsnd		240
+#define __NR_msgrcv		241
+#define __NR_msgget		242
+#define __NR_msgctl		243
+#define __NR_shmat		244
+#define __NR_shmdt		245
+#define __NR_shmget		246
+#define __NR_shmctl		247
+
+#define __NR_getdents64		248
+#define __NR_fcntl64		249
+				/* 250 is reserved for tux */
+				/* 251 is unused */
+#define __NR_gettid		252
+#define __NR_readahead		253
+#define __NR_setxattr		254
+#define __NR_lsetxattr		255
+#define __NR_fsetxattr		256
+#define __NR_getxattr		257
+#define __NR_lgetxattr		258
+#define __NR_fgetxattr		259
+#define __NR_listxattr		260
+#define __NR_llistxattr		261
+#define __NR_flistxattr		262
+#define __NR_removexattr	263
+#define __NR_lremovexattr	264
+#define __NR_fremovexattr	265
+#define __NR_tkill		266
+#define __NR_sendfile64		267
+#define __NR_futex		268
+#define __NR_sched_setaffinity	269
+#define __NR_sched_getaffinity	270
+				/* 271 is reserved for set_thread_area */
+				/* 272 is reserved for get_thread_area */
+#define __NR_io_setup		273
+#define __NR_io_destroy		274
+#define __NR_io_getevents	275
+#define __NR_io_submit		276
+#define __NR_io_cancel		277
+#define __NR_fadvise64		278
+				/* 279 is unused */
+#define __NR_exit_group		280
+
+#define __NR_lookup_dcookie	281
+#define __NR_epoll_create	282
+#define __NR_epoll_ctl		283
+#define __NR_epoll_wait		284
+#define __NR_remap_file_pages	285
+#define __NR_set_tid_address	286
+#define __NR_timer_create	287
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		296
+#define __NR_fstatfs64		297
+#define __NR_tgkill		298
+#define __NR_utimes		299
+#define __NR_fadvise64_64	300
+				/* 301 is reserved for vserver */
+				/* 302 is reserved for mbind */
+				/* 303 is reserved for get_mempolicy */
+				/* 304 is reserved for set_mempolicy */
+#define __NR_mq_open            305
+#define __NR_mq_unlink          (__NR_mq_open+1)
+#define __NR_mq_timedsend       (__NR_mq_open+2)
+#define __NR_mq_timedreceive    (__NR_mq_open+3)
+#define __NR_mq_notify          (__NR_mq_open+4)
+#define __NR_mq_getsetattr      (__NR_mq_open+5)
+				/* 311 is reserved for kexec */
+#define __NR_waitid		312
+#define __NR_add_key		313
+#define __NR_request_key	314
+#define __NR_keyctl		315
+#define __NR_ioprio_set		316
+#define __NR_ioprio_get		317
+#define __NR_inotify_init	318
+#define __NR_inotify_add_watch	319
+#define __NR_inotify_rm_watch	320
+				/* 321 is unused */
+#define __NR_migrate_pages	322
+#define __NR_openat		323
+#define __NR_mkdirat		324
+#define __NR_mknodat		325
+#define __NR_fchownat		326
+#define __NR_futimesat		327
+#define __NR_fstatat64		328
+#define __NR_unlinkat		329
+#define __NR_renameat		330
+#define __NR_linkat		331
+#define __NR_symlinkat		332
+#define __NR_readlinkat		333
+#define __NR_fchmodat		334
+#define __NR_faccessat		335
+#define __NR_pselect6		336
+#define __NR_ppoll		337
+#define __NR_unshare		338
+#define __NR_set_robust_list	339
+#define __NR_get_robust_list	340
+#define __NR_splice		341
+#define __NR_sync_file_range	342
+#define __NR_tee		343
+#define __NR_vmsplice		344
+#define __NR_move_pages		345
+#define __NR_getcpu		346
+#define __NR_epoll_pwait	347
+#define __NR_utimensat		348
+#define __NR_signalfd		349
+#define __NR_timerfd_create	350
+#define __NR_eventfd		351
+#define __NR_fallocate		352
+#define __NR_timerfd_settime	353
+#define __NR_timerfd_gettime	354
+#define __NR_signalfd4		355
+#define __NR_eventfd2		356
+#define __NR_epoll_create1	357
+#define __NR_dup3		358
+#define __NR_pipe2		359
+#define __NR_inotify_init1	360
+#define __NR_preadv		361
+#define __NR_pwritev		362
+#define __NR_rt_tgsigqueueinfo	363
+#define __NR_perf_event_open	364
+#define __NR_recvmmsg		365
+#define __NR_accept4		366
+#define __NR_fanotify_init	367
+#define __NR_fanotify_mark	368
+#define __NR_prlimit64		369
+#define __NR_name_to_handle_at	370
+#define __NR_open_by_handle_at	371
+#define __NR_clock_adjtime	372
+#define __NR_syncfs		373
+#define __NR_sendmmsg		374
+#define __NR_setns		375
+#define __NR_process_vm_readv	376
+#define __NR_process_vm_writev	377
+#define __NR_kcmp		378
+#define __NR_finit_module	379
+#define __NR_sched_getattr	380
+#define __NR_sched_setattr	381
+#define __NR_renameat2		382
+#define __NR_seccomp		383
+#define __NR_getrandom		384
+#define __NR_memfd_create	385
+#define __NR_bpf		386
+#define __NR_execveat		387
+#define __NR_userfaultfd	388
+#define __NR_membarrier		389
+#define __NR_mlock2		390
+#define __NR_copy_file_range	391
+#define __NR_preadv2		392
+#define __NR_pwritev2		393
+
+#define NR_syscalls 394
+
+#endif /* __ASM_SH_UNISTD_64_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/.gitignore b/src/kernel/linux/v4.14/arch/sh/kernel/.gitignore
new file mode 100644
index 0000000..c5f676c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/Makefile b/src/kernel/linux/v4.14/arch/sh/kernel/Makefile
new file mode 100644
index 0000000..dc80041
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/Makefile
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Linux/SuperH kernel.
+#
+
+extra-y	:= head_$(BITS).o vmlinux.lds
+
+ifdef CONFIG_FUNCTION_TRACER
+# Do not profile debug and lowlevel utilities
+CFLAGS_REMOVE_ftrace.o = -pg
+endif
+
+CFLAGS_REMOVE_return_address.o = -pg
+
+obj-y	:= debugtraps.o dma-nommu.o dumpstack.o 		\
+	   idle.o io.o irq.o irq_$(BITS).o kdebugfs.o			\
+	   machvec.o nmi_debug.o process.o				\
+	   process_$(BITS).o ptrace.o ptrace_$(BITS).o			\
+	   reboot.o return_address.o					\
+	   setup.o signal_$(BITS).o sys_sh.o 				\
+	   syscalls_$(BITS).o time.o topology.o traps.o			\
+	   traps_$(BITS).o unwinder.o
+
+ifndef CONFIG_GENERIC_IOMAP
+obj-y				+= iomap.o
+obj-$(CONFIG_HAS_IOPORT_MAP)	+= ioport.o
+endif
+
+obj-$(CONFIG_SUPERH32)		+= sys_sh32.o
+obj-y				+= cpu/
+obj-$(CONFIG_VSYSCALL)		+= vsyscall/
+obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
+obj-$(CONFIG_MODULES)		+= sh_ksyms_$(BITS).o module.o
+obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
+obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
+obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
+obj-$(CONFIG_KPROBES)		+= kprobes.o
+obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
+obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
+obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
+obj-$(CONFIG_HIBERNATION)	+= swsusp.o
+obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
+obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o perf_callchain.o
+
+obj-$(CONFIG_HAVE_HW_BREAKPOINT)		+= hw_breakpoint.o
+
+ccflags-y := -Werror
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/asm-offsets.c b/src/kernel/linux/v4.14/arch/sh/kernel/asm-offsets.c
new file mode 100644
index 0000000..a0322e8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/asm-offsets.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This program is used to generate definitions needed by
+ * assembly language modules.
+ *
+ * We use the technique used in the OSF Mach kernel code:
+ * generate asm statements containing #defines,
+ * compile this file to assembler, and then extract the
+ * #defines from the assembly-language output.
+ */
+
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/kbuild.h>
+#include <linux/suspend.h>
+
+#include <asm/thread_info.h>
+#include <asm/suspend.h>
+
+int main(void)
+{
+	/* offsets into the thread_info struct */
+	DEFINE(TI_TASK,		offsetof(struct thread_info, task));
+	DEFINE(TI_FLAGS,	offsetof(struct thread_info, flags));
+	DEFINE(TI_CPU,		offsetof(struct thread_info, cpu));
+	DEFINE(TI_PRE_COUNT,	offsetof(struct thread_info, preempt_count));
+	DEFINE(TI_SIZE,		sizeof(struct thread_info));
+
+#ifdef CONFIG_HIBERNATION
+	DEFINE(PBE_ADDRESS, offsetof(struct pbe, address));
+	DEFINE(PBE_ORIG_ADDRESS, offsetof(struct pbe, orig_address));
+	DEFINE(PBE_NEXT, offsetof(struct pbe, next));
+	DEFINE(SWSUSP_ARCH_REGS_SIZE, sizeof(struct swsusp_arch_regs));
+#endif
+
+	DEFINE(SH_SLEEP_MODE, offsetof(struct sh_sleep_data, mode));
+	DEFINE(SH_SLEEP_SF_PRE, offsetof(struct sh_sleep_data, sf_pre));
+	DEFINE(SH_SLEEP_SF_POST, offsetof(struct sh_sleep_data, sf_post));
+	DEFINE(SH_SLEEP_RESUME, offsetof(struct sh_sleep_data, resume));
+	DEFINE(SH_SLEEP_VBR, offsetof(struct sh_sleep_data, vbr));
+	DEFINE(SH_SLEEP_SPC, offsetof(struct sh_sleep_data, spc));
+	DEFINE(SH_SLEEP_SR, offsetof(struct sh_sleep_data, sr));
+	DEFINE(SH_SLEEP_SP, offsetof(struct sh_sleep_data, sp));
+	DEFINE(SH_SLEEP_BASE_ADDR, offsetof(struct sh_sleep_data, addr));
+	DEFINE(SH_SLEEP_BASE_DATA, offsetof(struct sh_sleep_data, data));
+	DEFINE(SH_SLEEP_REG_STBCR, offsetof(struct sh_sleep_regs, stbcr));
+	DEFINE(SH_SLEEP_REG_BAR, offsetof(struct sh_sleep_regs, bar));
+	DEFINE(SH_SLEEP_REG_PTEH, offsetof(struct sh_sleep_regs, pteh));
+	DEFINE(SH_SLEEP_REG_PTEL, offsetof(struct sh_sleep_regs, ptel));
+	DEFINE(SH_SLEEP_REG_TTB, offsetof(struct sh_sleep_regs, ttb));
+	DEFINE(SH_SLEEP_REG_TEA, offsetof(struct sh_sleep_regs, tea));
+	DEFINE(SH_SLEEP_REG_MMUCR, offsetof(struct sh_sleep_regs, mmucr));
+	DEFINE(SH_SLEEP_REG_PTEA, offsetof(struct sh_sleep_regs, ptea));
+	DEFINE(SH_SLEEP_REG_PASCR, offsetof(struct sh_sleep_regs, pascr));
+	DEFINE(SH_SLEEP_REG_IRMCR, offsetof(struct sh_sleep_regs, irmcr));
+	DEFINE(SH_SLEEP_REG_CCR, offsetof(struct sh_sleep_regs, ccr));
+	DEFINE(SH_SLEEP_REG_RAMCR, offsetof(struct sh_sleep_regs, ramcr));
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/Makefile b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/Makefile
new file mode 100644
index 0000000..f7c22ea9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/Makefile
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Linux/SuperH CPU-specific backends.
+#
+
+obj-$(CONFIG_CPU_SH2)		= sh2/
+obj-$(CONFIG_CPU_SH2A)		= sh2a/
+obj-$(CONFIG_CPU_SH3)		= sh3/
+obj-$(CONFIG_CPU_SH4)		= sh4/
+obj-$(CONFIG_CPU_SH5)		= sh5/
+
+# Special cases for family ancestry.
+
+obj-$(CONFIG_CPU_SH4A)		+= sh4a/
+obj-$(CONFIG_ARCH_SHMOBILE)	+= shmobile/
+
+# Common interfaces.
+
+obj-$(CONFIG_SH_ADC)		+= adc.o
+obj-$(CONFIG_SH_CLK_CPG_LEGACY)	+= clock-cpg.o
+
+obj-y	+= irq/ init.o clock.o fpu.o pfc.o proc.o
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/adc.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/adc.c
new file mode 100644
index 0000000..5091367
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/adc.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/kernel/adc.c -- SH3 on-chip ADC support
+ *
+ *  Copyright (C) 2004  Andriy Skulysh <askulysh@image.kiev.ua>
+ */
+
+#include <linux/module.h>
+#include <asm/adc.h>
+#include <asm/io.h>
+
+
+int adc_single(unsigned int channel)
+{
+	int off;
+	unsigned char csr;
+
+	if (channel >= 8) return -1;
+
+	off = (channel & 0x03) << 2;
+
+	csr = __raw_readb(ADCSR);
+	csr = channel | ADCSR_ADST | ADCSR_CKS;
+	__raw_writeb(csr, ADCSR);
+
+	do {
+		csr = __raw_readb(ADCSR);
+	} while ((csr & ADCSR_ADF) == 0);
+
+	csr &= ~(ADCSR_ADF | ADCSR_ADST);
+	__raw_writeb(csr, ADCSR);
+
+	return (((__raw_readb(ADDRAH + off) << 8) |
+		__raw_readb(ADDRAL + off)) >> 6);
+}
+
+EXPORT_SYMBOL(adc_single);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/clock-cpg.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/clock-cpg.c
new file mode 100644
index 0000000..5b75a38
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/clock-cpg.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk.h>
+#include <linux/compiler.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <asm/clock.h>
+
+static struct clk master_clk = {
+	.flags		= CLK_ENABLE_ON_INIT,
+	.rate		= CONFIG_SH_PCLK_FREQ,
+};
+
+static struct clk peripheral_clk = {
+	.parent		= &master_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static struct clk bus_clk = {
+	.parent		= &master_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static struct clk cpu_clk = {
+	.parent		= &master_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+/*
+ * The ordering of these clocks matters, do not change it.
+ */
+static struct clk *onchip_clocks[] = {
+	&master_clk,
+	&peripheral_clk,
+	&bus_clk,
+	&cpu_clk,
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("master_clk", &master_clk),
+	CLKDEV_CON_ID("peripheral_clk", &peripheral_clk),
+	CLKDEV_CON_ID("bus_clk", &bus_clk),
+	CLKDEV_CON_ID("cpu_clk", &cpu_clk),
+};
+
+int __init __deprecated cpg_clk_init(void)
+{
+	int i, ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) {
+		struct clk *clk = onchip_clocks[i];
+		arch_init_clk_ops(&clk->ops, i);
+		if (clk->ops)
+			ret |= clk_register(clk);
+	}
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	clk_add_alias("fck", "sh-tmu-sh3.0", "peripheral_clk", NULL);
+	clk_add_alias("fck", "sh-tmu.0", "peripheral_clk", NULL);
+	clk_add_alias("fck", "sh-tmu.1", "peripheral_clk", NULL);
+	clk_add_alias("fck", "sh-tmu.2", "peripheral_clk", NULL);
+	clk_add_alias("fck", "sh-mtu2", "peripheral_clk", NULL);
+	clk_add_alias("fck", "sh-cmt-16.0", "peripheral_clk", NULL);
+	clk_add_alias("fck", "sh-cmt-32.0", "peripheral_clk", NULL);
+
+	return ret;
+}
+
+/*
+ * Placeholder for compatibility, until the lazy CPUs do this
+ * on their own.
+ */
+int __init __weak arch_clk_init(void)
+{
+	return cpg_clk_init();
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/clock.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/clock.c
new file mode 100644
index 0000000..fca9b1e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/clock.c
@@ -0,0 +1,55 @@
+/*
+ * arch/sh/kernel/cpu/clock.c - SuperH clock framework
+ *
+ *  Copyright (C) 2005 - 2009  Paul Mundt
+ *
+ * This clock framework is derived from the OMAP version by:
+ *
+ *	Copyright (C) 2004 - 2008 Nokia Corporation
+ *	Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *
+ *  Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <asm/clock.h>
+#include <asm/machvec.h>
+
+int __init clk_init(void)
+{
+	int ret;
+
+#ifndef CONFIG_COMMON_CLK
+	ret = arch_clk_init();
+	if (unlikely(ret)) {
+		pr_err("%s: CPU clock registration failed.\n", __func__);
+		return ret;
+	}
+#endif
+
+	if (sh_mv.mv_clk_init) {
+		ret = sh_mv.mv_clk_init();
+		if (unlikely(ret)) {
+			pr_err("%s: machvec clock initialization failed.\n",
+			       __func__);
+			return ret;
+		}
+	}
+
+#ifndef CONFIG_COMMON_CLK
+	/* Kick the child clocks.. */
+	recalculate_root_clocks();
+
+	/* Enable the necessary init clocks */
+	clk_enable_init_clocks();
+#endif
+
+	return ret;
+}
+
+
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/fpu.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/fpu.c
new file mode 100644
index 0000000..ae354a2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/fpu.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/sched/signal.h>
+#include <linux/sched/task.h>
+#include <linux/sched/task_stack.h>
+#include <linux/slab.h>
+#include <asm/processor.h>
+#include <asm/fpu.h>
+#include <asm/traps.h>
+#include <asm/ptrace.h>
+
+int init_fpu(struct task_struct *tsk)
+{
+	if (tsk_used_math(tsk)) {
+		if ((boot_cpu_data.flags & CPU_HAS_FPU) && tsk == current)
+			unlazy_fpu(tsk, task_pt_regs(tsk));
+		return 0;
+	}
+
+	/*
+	 * Memory allocation at the first usage of the FPU and other state.
+	 */
+	if (!tsk->thread.xstate) {
+		tsk->thread.xstate = kmem_cache_alloc(task_xstate_cachep,
+						      GFP_KERNEL);
+		if (!tsk->thread.xstate)
+			return -ENOMEM;
+	}
+
+	if (boot_cpu_data.flags & CPU_HAS_FPU) {
+		struct sh_fpu_hard_struct *fp = &tsk->thread.xstate->hardfpu;
+		memset(fp, 0, xstate_size);
+		fp->fpscr = FPSCR_INIT;
+	} else {
+		struct sh_fpu_soft_struct *fp = &tsk->thread.xstate->softfpu;
+		memset(fp, 0, xstate_size);
+		fp->fpscr = FPSCR_INIT;
+	}
+
+	set_stopped_child_used_math(tsk);
+	return 0;
+}
+
+#ifdef CONFIG_SH_FPU
+void __fpu_state_restore(void)
+{
+	struct task_struct *tsk = current;
+
+	restore_fpu(tsk);
+
+	task_thread_info(tsk)->status |= TS_USEDFPU;
+	tsk->thread.fpu_counter++;
+}
+
+void fpu_state_restore(struct pt_regs *regs)
+{
+	struct task_struct *tsk = current;
+
+	if (unlikely(!user_mode(regs))) {
+		printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
+		BUG();
+		return;
+	}
+
+	if (!tsk_used_math(tsk)) {
+		local_irq_enable();
+		/*
+		 * does a slab alloc which can sleep
+		 */
+		if (init_fpu(tsk)) {
+			/*
+			 * ran out of memory!
+			 */
+			do_group_exit(SIGKILL);
+			return;
+		}
+		local_irq_disable();
+	}
+
+	grab_fpu(regs);
+
+	__fpu_state_restore();
+}
+
+BUILD_TRAP_HANDLER(fpu_state_restore)
+{
+	TRAP_HANDLER_DECL;
+
+	fpu_state_restore(regs);
+}
+#endif /* CONFIG_SH_FPU */
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/init.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/init.c
new file mode 100644
index 0000000..c4f01c5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/init.c
@@ -0,0 +1,369 @@
+/*
+ * arch/sh/kernel/cpu/init.c
+ *
+ * CPU init code
+ *
+ * Copyright (C) 2002 - 2009  Paul Mundt
+ * Copyright (C) 2003  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/log2.h>
+#include <asm/mmu_context.h>
+#include <asm/processor.h>
+#include <linux/uaccess.h>
+#include <asm/page.h>
+#include <asm/cacheflush.h>
+#include <asm/cache.h>
+#include <asm/elf.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/sh_bios.h>
+#include <asm/setup.h>
+
+#ifdef CONFIG_SH_FPU
+#define cpu_has_fpu	1
+#else
+#define cpu_has_fpu	0
+#endif
+
+#ifdef CONFIG_SH_DSP
+#define cpu_has_dsp	1
+#else
+#define cpu_has_dsp	0
+#endif
+
+/*
+ * Generic wrapper for command line arguments to disable on-chip
+ * peripherals (nofpu, nodsp, and so forth).
+ */
+#define onchip_setup(x)					\
+static int x##_disabled = !cpu_has_##x;			\
+							\
+static int x##_setup(char *opts)			\
+{							\
+	x##_disabled = 1;				\
+	return 1;					\
+}							\
+__setup("no" __stringify(x), x##_setup);
+
+onchip_setup(fpu);
+onchip_setup(dsp);
+
+#ifdef CONFIG_SPECULATIVE_EXECUTION
+#define CPUOPM		0xff2f0000
+#define CPUOPM_RABD	(1 << 5)
+
+static void speculative_execution_init(void)
+{
+	/* Clear RABD */
+	__raw_writel(__raw_readl(CPUOPM) & ~CPUOPM_RABD, CPUOPM);
+
+	/* Flush the update */
+	(void)__raw_readl(CPUOPM);
+	ctrl_barrier();
+}
+#else
+#define speculative_execution_init()	do { } while (0)
+#endif
+
+#ifdef CONFIG_CPU_SH4A
+#define EXPMASK			0xff2f0004
+#define EXPMASK_RTEDS		(1 << 0)
+#define EXPMASK_BRDSSLP		(1 << 1)
+#define EXPMASK_MMCAW		(1 << 4)
+
+static void expmask_init(void)
+{
+	unsigned long expmask = __raw_readl(EXPMASK);
+
+	/*
+	 * Future proofing.
+	 *
+	 * Disable support for slottable sleep instruction, non-nop
+	 * instructions in the rte delay slot, and associative writes to
+	 * the memory-mapped cache array.
+	 */
+	expmask &= ~(EXPMASK_RTEDS | EXPMASK_BRDSSLP | EXPMASK_MMCAW);
+
+	__raw_writel(expmask, EXPMASK);
+	ctrl_barrier();
+}
+#else
+#define expmask_init()	do { } while (0)
+#endif
+
+/* 2nd-level cache init */
+void __attribute__ ((weak)) l2_cache_init(void)
+{
+}
+
+/*
+ * Generic first-level cache init
+ */
+#if defined(CONFIG_SUPERH32) && !defined(CONFIG_CPU_J2)
+static void cache_init(void)
+{
+	unsigned long ccr, flags;
+
+	jump_to_uncached();
+	ccr = __raw_readl(SH_CCR);
+
+	/*
+	 * At this point we don't know whether the cache is enabled or not - a
+	 * bootloader may have enabled it.  There are at least 2 things that
+	 * could be dirty in the cache at this point:
+	 * 1. kernel command line set up by boot loader
+	 * 2. spilled registers from the prolog of this function
+	 * => before re-initialising the cache, we must do a purge of the whole
+	 * cache out to memory for safety.  As long as nothing is spilled
+	 * during the loop to lines that have already been done, this is safe.
+	 * - RPC
+	 */
+	if (ccr & CCR_CACHE_ENABLE) {
+		unsigned long ways, waysize, addrstart;
+
+		waysize = current_cpu_data.dcache.sets;
+
+#ifdef CCR_CACHE_ORA
+		/*
+		 * If the OC is already in RAM mode, we only have
+		 * half of the entries to flush..
+		 */
+		if (ccr & CCR_CACHE_ORA)
+			waysize >>= 1;
+#endif
+
+		waysize <<= current_cpu_data.dcache.entry_shift;
+
+#ifdef CCR_CACHE_EMODE
+		/* If EMODE is not set, we only have 1 way to flush. */
+		if (!(ccr & CCR_CACHE_EMODE))
+			ways = 1;
+		else
+#endif
+			ways = current_cpu_data.dcache.ways;
+
+		addrstart = CACHE_OC_ADDRESS_ARRAY;
+		do {
+			unsigned long addr;
+
+			for (addr = addrstart;
+			     addr < addrstart + waysize;
+			     addr += current_cpu_data.dcache.linesz)
+				__raw_writel(0, addr);
+
+			addrstart += current_cpu_data.dcache.way_incr;
+		} while (--ways);
+	}
+
+	/*
+	 * Default CCR values .. enable the caches
+	 * and invalidate them immediately..
+	 */
+	flags = CCR_CACHE_ENABLE | CCR_CACHE_INVALIDATE;
+
+#ifdef CCR_CACHE_EMODE
+	/* Force EMODE if possible */
+	if (current_cpu_data.dcache.ways > 1)
+		flags |= CCR_CACHE_EMODE;
+	else
+		flags &= ~CCR_CACHE_EMODE;
+#endif
+
+#if defined(CONFIG_CACHE_WRITETHROUGH)
+	/* Write-through */
+	flags |= CCR_CACHE_WT;
+#elif defined(CONFIG_CACHE_WRITEBACK)
+	/* Write-back */
+	flags |= CCR_CACHE_CB;
+#else
+	/* Off */
+	flags &= ~CCR_CACHE_ENABLE;
+#endif
+
+	l2_cache_init();
+
+	__raw_writel(flags, SH_CCR);
+	back_to_cached();
+}
+#else
+#define cache_init()	do { } while (0)
+#endif
+
+#define CSHAPE(totalsize, linesize, assoc) \
+	((totalsize & ~0xff) | (linesize << 4) | assoc)
+
+#define CACHE_DESC_SHAPE(desc)	\
+	CSHAPE((desc).way_size * (desc).ways, ilog2((desc).linesz), (desc).ways)
+
+static void detect_cache_shape(void)
+{
+	l1d_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.dcache);
+
+	if (current_cpu_data.dcache.flags & SH_CACHE_COMBINED)
+		l1i_cache_shape = l1d_cache_shape;
+	else
+		l1i_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.icache);
+
+	if (current_cpu_data.flags & CPU_HAS_L2_CACHE)
+		l2_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.scache);
+	else
+		l2_cache_shape = -1; /* No S-cache */
+}
+
+static void fpu_init(void)
+{
+	/* Disable the FPU */
+	if (fpu_disabled && (current_cpu_data.flags & CPU_HAS_FPU)) {
+		printk("FPU Disabled\n");
+		current_cpu_data.flags &= ~CPU_HAS_FPU;
+	}
+
+	disable_fpu();
+	clear_used_math();
+}
+
+#ifdef CONFIG_SH_DSP
+static void release_dsp(void)
+{
+	unsigned long sr;
+
+	/* Clear SR.DSP bit */
+	__asm__ __volatile__ (
+		"stc\tsr, %0\n\t"
+		"and\t%1, %0\n\t"
+		"ldc\t%0, sr\n\t"
+		: "=&r" (sr)
+		: "r" (~SR_DSP)
+	);
+}
+
+static void dsp_init(void)
+{
+	unsigned long sr;
+
+	/*
+	 * Set the SR.DSP bit, wait for one instruction, and then read
+	 * back the SR value.
+	 */
+	__asm__ __volatile__ (
+		"stc\tsr, %0\n\t"
+		"or\t%1, %0\n\t"
+		"ldc\t%0, sr\n\t"
+		"nop\n\t"
+		"stc\tsr, %0\n\t"
+		: "=&r" (sr)
+		: "r" (SR_DSP)
+	);
+
+	/* If the DSP bit is still set, this CPU has a DSP */
+	if (sr & SR_DSP)
+		current_cpu_data.flags |= CPU_HAS_DSP;
+
+	/* Disable the DSP */
+	if (dsp_disabled && (current_cpu_data.flags & CPU_HAS_DSP)) {
+		printk("DSP Disabled\n");
+		current_cpu_data.flags &= ~CPU_HAS_DSP;
+	}
+
+	/* Now that we've determined the DSP status, clear the DSP bit. */
+	release_dsp();
+}
+#else
+static inline void dsp_init(void) { }
+#endif /* CONFIG_SH_DSP */
+
+/**
+ * cpu_init
+ *
+ * This is our initial entry point for each CPU, and is invoked on the
+ * boot CPU prior to calling start_kernel(). For SMP, a combination of
+ * this and start_secondary() will bring up each processor to a ready
+ * state prior to hand forking the idle loop.
+ *
+ * We do all of the basic processor init here, including setting up
+ * the caches, FPU, DSP, etc. By the time start_kernel() is hit (and
+ * subsequently platform_setup()) things like determining the CPU
+ * subtype and initial configuration will all be done.
+ *
+ * Each processor family is still responsible for doing its own probing
+ * and cache configuration in cpu_probe().
+ */
+asmlinkage void cpu_init(void)
+{
+	current_thread_info()->cpu = hard_smp_processor_id();
+
+	/* First, probe the CPU */
+	cpu_probe();
+
+	if (current_cpu_data.type == CPU_SH_NONE)
+		panic("Unknown CPU");
+
+	/* First setup the rest of the I-cache info */
+	current_cpu_data.icache.entry_mask = current_cpu_data.icache.way_incr -
+				      current_cpu_data.icache.linesz;
+
+	current_cpu_data.icache.way_size = current_cpu_data.icache.sets *
+				    current_cpu_data.icache.linesz;
+
+	/* And the D-cache too */
+	current_cpu_data.dcache.entry_mask = current_cpu_data.dcache.way_incr -
+				      current_cpu_data.dcache.linesz;
+
+	current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets *
+				    current_cpu_data.dcache.linesz;
+
+	/* Init the cache */
+	cache_init();
+
+	if (raw_smp_processor_id() == 0) {
+#ifdef CONFIG_MMU
+		shm_align_mask = max_t(unsigned long,
+				       current_cpu_data.dcache.way_size - 1,
+				       PAGE_SIZE - 1);
+#else
+		shm_align_mask = PAGE_SIZE - 1;
+#endif
+
+		/* Boot CPU sets the cache shape */
+		detect_cache_shape();
+	}
+
+	fpu_init();
+	dsp_init();
+
+	/*
+	 * Initialize the per-CPU ASID cache very early, since the
+	 * TLB flushing routines depend on this being setup.
+	 */
+	current_cpu_data.asid_cache = NO_CONTEXT;
+
+	current_cpu_data.phys_bits = __in_29bit_mode() ? 29 : 32;
+
+	speculative_execution_init();
+	expmask_init();
+
+	/* Do the rest of the boot processor setup */
+	if (raw_smp_processor_id() == 0) {
+		/* Save off the BIOS VBR, if there is one */
+		sh_bios_vbr_init();
+
+		/*
+		 * Setup VBR for boot CPU. Secondary CPUs do this through
+		 * start_secondary().
+		 */
+		per_cpu_trap_init();
+
+		/*
+		 * Boot processor to setup the FP and extended state
+		 * context info.
+		 */
+		init_thread_xstate();
+	}
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/irq/Makefile b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/irq/Makefile
new file mode 100644
index 0000000..3f8e794
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/irq/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Linux/SuperH CPU-specific IRQ handlers.
+#
+obj-$(CONFIG_SUPERH32)			+= imask.o
+obj-$(CONFIG_CPU_SH5)			+= intc-sh5.o
+obj-$(CONFIG_CPU_HAS_IPR_IRQ)		+= ipr.o
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/irq/imask.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/irq/imask.c
new file mode 100644
index 0000000..572585c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/irq/imask.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/kernel/cpu/irq/imask.c
+ *
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ *
+ * Simple interrupt handling using IMASK of SR register.
+ *
+ */
+/* NOTE: Will not work on level 15 */
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+#include <linux/irq.h>
+#include <linux/bitmap.h>
+#include <asm/irq.h>
+
+/* Bitmap of IRQ masked */
+#define IMASK_PRIORITY	15
+
+static DECLARE_BITMAP(imask_mask, IMASK_PRIORITY);
+static int interrupt_priority;
+
+static inline void set_interrupt_registers(int ip)
+{
+	unsigned long __dummy;
+
+	asm volatile(
+#ifdef CONFIG_CPU_HAS_SR_RB
+		     "ldc	%2, r6_bank\n\t"
+#endif
+		     "stc	sr, %0\n\t"
+		     "and	#0xf0, %0\n\t"
+		     "shlr2	%0\n\t"
+		     "cmp/eq	#0x3c, %0\n\t"
+		     "bt/s	1f	! CLI-ed\n\t"
+		     " stc	sr, %0\n\t"
+		     "and	%1, %0\n\t"
+		     "or	%2, %0\n\t"
+		     "ldc	%0, sr\n"
+		     "1:"
+		     : "=&z" (__dummy)
+		     : "r" (~0xf0), "r" (ip << 4)
+		     : "t");
+}
+
+static void mask_imask_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+
+	clear_bit(irq, imask_mask);
+	if (interrupt_priority < IMASK_PRIORITY - irq)
+		interrupt_priority = IMASK_PRIORITY - irq;
+	set_interrupt_registers(interrupt_priority);
+}
+
+static void unmask_imask_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+
+	set_bit(irq, imask_mask);
+	interrupt_priority = IMASK_PRIORITY -
+		find_first_zero_bit(imask_mask, IMASK_PRIORITY);
+	set_interrupt_registers(interrupt_priority);
+}
+
+static struct irq_chip imask_irq_chip = {
+	.name		= "SR.IMASK",
+	.irq_mask	= mask_imask_irq,
+	.irq_unmask	= unmask_imask_irq,
+	.irq_mask_ack	= mask_imask_irq,
+};
+
+void make_imask_irq(unsigned int irq)
+{
+	irq_set_chip_and_handler_name(irq, &imask_irq_chip, handle_level_irq,
+				      "level");
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/irq/intc-sh5.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/irq/intc-sh5.c
new file mode 100644
index 0000000..9e056a3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -0,0 +1,197 @@
+/*
+ * arch/sh/kernel/cpu/irq/intc-sh5.c
+ *
+ * Interrupt Controller support for SH5 INTC.
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * Per-interrupt selective. IRLM=0 (Fixed priority) is not
+ * supported being useless without a cascaded interrupt
+ * controller.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <cpu/irq.h>
+#include <asm/page.h>
+
+/*
+ * Maybe the generic Peripheral block could move to a more
+ * generic include file. INTC Block will be defined here
+ * and only here to make INTC self-contained in a single
+ * file.
+ */
+#define	INTC_BLOCK_OFFSET	0x01000000
+
+/* Base */
+#define INTC_BASE		PHYS_PERIPHERAL_BLOCK + \
+				INTC_BLOCK_OFFSET
+
+/* Address */
+#define INTC_ICR_SET		(intc_virt + 0x0)
+#define INTC_ICR_CLEAR		(intc_virt + 0x8)
+#define INTC_INTPRI_0		(intc_virt + 0x10)
+#define INTC_INTSRC_0		(intc_virt + 0x50)
+#define INTC_INTSRC_1		(intc_virt + 0x58)
+#define INTC_INTREQ_0		(intc_virt + 0x60)
+#define INTC_INTREQ_1		(intc_virt + 0x68)
+#define INTC_INTENB_0		(intc_virt + 0x70)
+#define INTC_INTENB_1		(intc_virt + 0x78)
+#define INTC_INTDSB_0		(intc_virt + 0x80)
+#define INTC_INTDSB_1		(intc_virt + 0x88)
+
+#define INTC_ICR_IRLM		0x1
+#define	INTC_INTPRI_PREGS	8		/* 8 Priority Registers */
+#define	INTC_INTPRI_PPREG	8		/* 8 Priorities per Register */
+
+
+/*
+ * Mapper between the vector ordinal and the IRQ number
+ * passed to kernel/device drivers.
+ */
+int intc_evt_to_irq[(0xE20/0x20)+1] = {
+	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0x000 - 0x0E0 */
+	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0x100 - 0x1E0 */
+	 0,  0,  0,  0,  0,  1,  0,  0,	/* 0x200 - 0x2E0 */
+	 2,  0,  0,  3,  0,  0,  0, -1,	/* 0x300 - 0x3E0 */
+	32, 33, 34, 35, 36, 37, 38, -1,	/* 0x400 - 0x4E0 */
+	-1, -1, -1, 63, -1, -1, -1, -1,	/* 0x500 - 0x5E0 */
+	-1, -1, 18, 19, 20, 21, 22, -1,	/* 0x600 - 0x6E0 */
+	39, 40, 41, 42, -1, -1, -1, -1,	/* 0x700 - 0x7E0 */
+	 4,  5,  6,  7, -1, -1, -1, -1,	/* 0x800 - 0x8E0 */
+	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0x900 - 0x9E0 */
+	12, 13, 14, 15, 16, 17, -1, -1,	/* 0xA00 - 0xAE0 */
+	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0xB00 - 0xBE0 */
+	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0xC00 - 0xCE0 */
+	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0xD00 - 0xDE0 */
+	-1, -1				/* 0xE00 - 0xE20 */
+};
+
+static unsigned long intc_virt;
+static int irlm;		/* IRL mode */
+
+static void enable_intc_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned long reg;
+	unsigned long bitmask;
+
+	if ((irq <= IRQ_IRL3) && (irlm == NO_PRIORITY))
+		printk("Trying to use straight IRL0-3 with an encoding platform.\n");
+
+	if (irq < 32) {
+		reg = INTC_INTENB_0;
+		bitmask = 1 << irq;
+	} else {
+		reg = INTC_INTENB_1;
+		bitmask = 1 << (irq - 32);
+	}
+
+	__raw_writel(bitmask, reg);
+}
+
+static void disable_intc_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned long reg;
+	unsigned long bitmask;
+
+	if (irq < 32) {
+		reg = INTC_INTDSB_0;
+		bitmask = 1 << irq;
+	} else {
+		reg = INTC_INTDSB_1;
+		bitmask = 1 << (irq - 32);
+	}
+
+	__raw_writel(bitmask, reg);
+}
+
+static struct irq_chip intc_irq_type = {
+	.name = "INTC",
+	.irq_enable = enable_intc_irq,
+	.irq_disable = disable_intc_irq,
+};
+
+void __init plat_irq_setup(void)
+{
+	unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
+	unsigned long reg;
+	int i;
+
+	intc_virt = (unsigned long)ioremap_nocache(INTC_BASE, 1024);
+	if (!intc_virt) {
+		panic("Unable to remap INTC\n");
+	}
+
+
+	/* Set default: per-line enable/disable, priority driven ack/eoi */
+	for (i = 0; i < NR_INTC_IRQS; i++)
+		irq_set_chip_and_handler(i, &intc_irq_type, handle_level_irq);
+
+
+	/* Disable all interrupts and set all priorities to 0 to avoid trouble */
+	__raw_writel(-1, INTC_INTDSB_0);
+	__raw_writel(-1, INTC_INTDSB_1);
+
+	for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8)
+		__raw_writel( NO_PRIORITY, reg);
+
+
+#ifdef CONFIG_SH_CAYMAN
+	{
+		unsigned long data;
+
+		/* Set IRLM */
+		/* If all the priorities are set to 'no priority', then
+		 * assume we are using encoded mode.
+		 */
+		irlm = platform_int_priority[IRQ_IRL0] +
+		       platform_int_priority[IRQ_IRL1] +
+		       platform_int_priority[IRQ_IRL2] +
+		       platform_int_priority[IRQ_IRL3];
+		if (irlm == NO_PRIORITY) {
+			/* IRLM = 0 */
+			reg = INTC_ICR_CLEAR;
+			i = IRQ_INTA;
+			printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
+		} else {
+			/* IRLM = 1 */
+			reg = INTC_ICR_SET;
+			i = IRQ_IRL0;
+		}
+		__raw_writel(INTC_ICR_IRLM, reg);
+
+		/* Set interrupt priorities according to platform description */
+		for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
+			data |= platform_int_priority[i] <<
+				((i % INTC_INTPRI_PPREG) * 4);
+			if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
+				/* Upon the 7th, set Priority Register */
+				__raw_writel(data, reg);
+				data = 0;
+				reg += 8;
+			}
+		}
+	}
+#endif
+
+	/*
+	 * And now let interrupts come in.
+	 * sti() is not enough, we need to
+	 * lower priority, too.
+	 */
+        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
+                             "and       %0, %1, %0\n\t"
+                             "putcon    %0, " __SR "\n\t"
+                             : "=&r" (__dummy0)
+                             : "r" (__dummy1));
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/irq/ipr.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/irq/ipr.c
new file mode 100644
index 0000000..5de6dff
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/irq/ipr.c
@@ -0,0 +1,83 @@
+/*
+ * Interrupt handling for IPR-based IRQ.
+ *
+ * Copyright (C) 1999  Niibe Yutaka & Takeshi Yaegashi
+ * Copyright (C) 2000  Kazumoto Kojima
+ * Copyright (C) 2003  Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
+ * Copyright (C) 2006  Paul Mundt
+ *
+ * Supported system:
+ *	On-chip supporting modules (TMU, RTC, etc.).
+ *	On-chip supporting modules for SH7709/SH7709A/SH7729.
+ *	Hitachi SolutionEngine external I/O:
+ *		MS7709SE01, MS7709ASE01, and MS7750SE01
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/topology.h>
+
+static inline struct ipr_desc *get_ipr_desc(struct irq_data *data)
+{
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	return container_of(chip, struct ipr_desc, chip);
+}
+
+static void disable_ipr_irq(struct irq_data *data)
+{
+	struct ipr_data *p = irq_data_get_irq_chip_data(data);
+	unsigned long addr = get_ipr_desc(data)->ipr_offsets[p->ipr_idx];
+	/* Set the priority in IPR to 0 */
+	__raw_writew(__raw_readw(addr) & (0xffff ^ (0xf << p->shift)), addr);
+	(void)__raw_readw(addr);	/* Read back to flush write posting */
+}
+
+static void enable_ipr_irq(struct irq_data *data)
+{
+	struct ipr_data *p = irq_data_get_irq_chip_data(data);
+	unsigned long addr = get_ipr_desc(data)->ipr_offsets[p->ipr_idx];
+	/* Set priority in IPR back to original value */
+	__raw_writew(__raw_readw(addr) | (p->priority << p->shift), addr);
+}
+
+/*
+ * The shift value is now the number of bits to shift, not the number of
+ * bits/4. This is to make it easier to read the value directly from the
+ * datasheets. The IPR address is calculated using the ipr_offset table.
+ */
+void register_ipr_controller(struct ipr_desc *desc)
+{
+	int i;
+
+	desc->chip.irq_mask = disable_ipr_irq;
+	desc->chip.irq_unmask = enable_ipr_irq;
+
+	for (i = 0; i < desc->nr_irqs; i++) {
+		struct ipr_data *p = desc->ipr_data + i;
+		int res;
+
+		BUG_ON(p->ipr_idx >= desc->nr_offsets);
+		BUG_ON(!desc->ipr_offsets[p->ipr_idx]);
+
+		res = irq_alloc_desc_at(p->irq, numa_node_id());
+		if (unlikely(res != p->irq && res != -EEXIST)) {
+			printk(KERN_INFO "can not get irq_desc for %d\n",
+			       p->irq);
+			continue;
+		}
+
+		disable_irq_nosync(p->irq);
+		irq_set_chip_and_handler_name(p->irq, &desc->chip,
+					      handle_level_irq, "level");
+		irq_set_chip_data(p->irq, p);
+		disable_ipr_irq(irq_get_irq_data(p->irq));
+	}
+}
+EXPORT_SYMBOL(register_ipr_controller);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/pfc.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/pfc.c
new file mode 100644
index 0000000..d766564
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/pfc.c
@@ -0,0 +1,33 @@
+/*
+ * SH Pin Function Control Initialization
+ *
+ * Copyright (C) 2012  Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <cpu/pfc.h>
+
+static struct platform_device sh_pfc_device = {
+	.id		= -1,
+};
+
+int __init sh_pfc_register(const char *name,
+			   struct resource *resource, u32 num_resources)
+{
+	sh_pfc_device.name = name;
+	sh_pfc_device.num_resources = num_resources;
+	sh_pfc_device.resource = resource;
+
+	return platform_device_register(&sh_pfc_device);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/proc.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/proc.c
new file mode 100644
index 0000000..85961b4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/proc.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/seq_file.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/machvec.h>
+#include <asm/processor.h>
+
+static const char *cpu_name[] = {
+	[CPU_SH7201]	= "SH7201",
+	[CPU_SH7203]	= "SH7203",	[CPU_SH7263]	= "SH7263",
+	[CPU_SH7264]	= "SH7264",	[CPU_SH7269]	= "SH7269",
+	[CPU_SH7206]	= "SH7206",	[CPU_SH7619]	= "SH7619",
+	[CPU_SH7705]	= "SH7705",	[CPU_SH7706]	= "SH7706",
+	[CPU_SH7707]	= "SH7707",	[CPU_SH7708]	= "SH7708",
+	[CPU_SH7709]	= "SH7709",	[CPU_SH7710]	= "SH7710",
+	[CPU_SH7712]	= "SH7712",	[CPU_SH7720]	= "SH7720",
+	[CPU_SH7721]	= "SH7721",	[CPU_SH7729]	= "SH7729",
+	[CPU_SH7750]	= "SH7750",	[CPU_SH7750S]	= "SH7750S",
+	[CPU_SH7750R]	= "SH7750R",	[CPU_SH7751]	= "SH7751",
+	[CPU_SH7751R]	= "SH7751R",	[CPU_SH7760]	= "SH7760",
+	[CPU_SH4_202]	= "SH4-202",	[CPU_SH4_501]	= "SH4-501",
+	[CPU_SH7763]	= "SH7763",	[CPU_SH7770]	= "SH7770",
+	[CPU_SH7780]	= "SH7780",	[CPU_SH7781]	= "SH7781",
+	[CPU_SH7343]	= "SH7343",	[CPU_SH7785]	= "SH7785",
+	[CPU_SH7786]	= "SH7786",	[CPU_SH7757]	= "SH7757",
+	[CPU_SH7722]	= "SH7722",	[CPU_SHX3]	= "SH-X3",
+	[CPU_SH5_101]	= "SH5-101",	[CPU_SH5_103]	= "SH5-103",
+	[CPU_MXG]	= "MX-G",	[CPU_SH7723]	= "SH7723",
+	[CPU_SH7366]	= "SH7366",	[CPU_SH7724]	= "SH7724",
+	[CPU_SH7372]	= "SH7372",	[CPU_SH7734]	= "SH7734",
+	[CPU_J2]	= "J2",
+	[CPU_SH_NONE]	= "Unknown"
+};
+
+const char *get_cpu_subtype(struct sh_cpuinfo *c)
+{
+	return cpu_name[c->type];
+}
+EXPORT_SYMBOL(get_cpu_subtype);
+
+#ifdef CONFIG_PROC_FS
+/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
+static const char *cpu_flags[] = {
+	"none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
+	"ptea", "llsc", "l2", "op32", "pteaex", NULL
+};
+
+static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c)
+{
+	unsigned long i;
+
+	seq_printf(m, "cpu flags\t:");
+
+	if (!c->flags) {
+		seq_printf(m, " %s\n", cpu_flags[0]);
+		return;
+	}
+
+	for (i = 0; cpu_flags[i]; i++)
+		if ((c->flags & (1 << i)))
+			seq_printf(m, " %s", cpu_flags[i+1]);
+
+	seq_printf(m, "\n");
+}
+
+static void show_cacheinfo(struct seq_file *m, const char *type,
+			   struct cache_info info)
+{
+	unsigned int cache_size;
+
+	cache_size = info.ways * info.sets * info.linesz;
+
+	seq_printf(m, "%s size\t: %2dKiB (%d-way)\n",
+		   type, cache_size >> 10, info.ways);
+}
+
+/*
+ *	Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	struct sh_cpuinfo *c = v;
+	unsigned int cpu = c - cpu_data;
+
+	if (!cpu_online(cpu))
+		return 0;
+
+	if (cpu == 0)
+		seq_printf(m, "machine\t\t: %s\n", get_system_type());
+	else
+		seq_printf(m, "\n");
+
+	seq_printf(m, "processor\t: %d\n", cpu);
+	seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
+	seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c));
+	if (c->cut_major == -1)
+		seq_printf(m, "cut\t\t: unknown\n");
+	else if (c->cut_minor == -1)
+		seq_printf(m, "cut\t\t: %d.x\n", c->cut_major);
+	else
+		seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor);
+
+	show_cpuflags(m, c);
+
+	seq_printf(m, "cache type\t: ");
+
+	/*
+	 * Check for what type of cache we have, we support both the
+	 * unified cache on the SH-2 and SH-3, as well as the harvard
+	 * style cache on the SH-4.
+	 */
+	if (c->icache.flags & SH_CACHE_COMBINED) {
+		seq_printf(m, "unified\n");
+		show_cacheinfo(m, "cache", c->icache);
+	} else {
+		seq_printf(m, "split (harvard)\n");
+		show_cacheinfo(m, "icache", c->icache);
+		show_cacheinfo(m, "dcache", c->dcache);
+	}
+
+	/* Optional secondary cache */
+	if (c->flags & CPU_HAS_L2_CACHE)
+		show_cacheinfo(m, "scache", c->scache);
+
+	seq_printf(m, "address sizes\t: %u bits physical\n", c->phys_bits);
+
+	seq_printf(m, "bogomips\t: %lu.%02lu\n",
+		     c->loops_per_jiffy/(500000/HZ),
+		     (c->loops_per_jiffy/(5000/HZ)) % 100);
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	return *pos < NR_CPUS ? cpu_data + *pos : NULL;
+}
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+const struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_cpuinfo,
+};
+#endif /* CONFIG_PROC_FS */
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/Makefile b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/Makefile
new file mode 100644
index 0000000..904c428
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the Linux/SuperH SH-2 backends.
+#
+
+obj-y	:= ex.o probe.o entry.o
+
+obj-$(CONFIG_CPU_SUBTYPE_SH7619) += setup-sh7619.o clock-sh7619.o
+
+# SMP setup
+smp-$(CONFIG_CPU_J2)			:= smp-j2.o
+obj-$(CONFIG_SMP)			+= $(smp-y)
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/clock-sh7619.c
new file mode 100644
index 0000000..e80252a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/clock-sh7619.c
@@ -0,0 +1,77 @@
+/*
+ * arch/sh/kernel/cpu/sh2/clock-sh7619.c
+ *
+ * SH7619 support for the clock framework
+ *
+ *  Copyright (C) 2006  Yoshinori Sato
+ *
+ * Based on clock-sh4.c
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/processor.h>
+
+static const int pll1rate[] = {1,2};
+static const int pfc_divisors[] = {1,2,0,4};
+static unsigned int pll2_mult;
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
+}
+
+static struct sh_clk_ops sh7619_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static unsigned long module_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(FREQCR) & 0x0007);
+	return clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7619_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static unsigned long bus_clk_recalc(struct clk *clk)
+{
+	return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
+}
+
+static struct sh_clk_ops sh7619_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static struct sh_clk_ops sh7619_cpu_clk_ops = {
+	.recalc		= followparent_recalc,
+};
+
+static struct sh_clk_ops *sh7619_clk_ops[] = {
+	&sh7619_master_clk_ops,
+	&sh7619_module_clk_ops,
+	&sh7619_bus_clk_ops,
+	&sh7619_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+	if (test_mode_pin(MODE_PIN2 | MODE_PIN0) ||
+	    test_mode_pin(MODE_PIN2 | MODE_PIN1))
+		pll2_mult = 2;
+	else if (test_mode_pin(MODE_PIN0) || test_mode_pin(MODE_PIN1))
+		pll2_mult = 4;
+
+	BUG_ON(!pll2_mult);
+
+	if (idx < ARRAY_SIZE(sh7619_clk_ops))
+		*ops = sh7619_clk_ops[idx];
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/entry.S b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/entry.S
new file mode 100644
index 0000000..1ee0a6e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/entry.S
@@ -0,0 +1,376 @@
+/*
+ * arch/sh/kernel/cpu/sh2/entry.S
+ *
+ * The SH-2 exception entry
+ *
+ * Copyright (C) 2005-2008 Yoshinori Sato
+ * Copyright (C) 2005  AXE,Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <cpu/mmu_context.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/page.h>
+	
+/* Offsets to the stack */
+OFF_R0  =  0		/* Return value. New ABI also arg4 */
+OFF_R1  =  4     	/* New ABI: arg5 */
+OFF_R2  =  8     	/* New ABI: arg6 */
+OFF_R3  =  12     	/* New ABI: syscall_nr */
+OFF_R4  =  16     	/* New ABI: arg0 */
+OFF_R5  =  20     	/* New ABI: arg1 */
+OFF_R6  =  24     	/* New ABI: arg2 */
+OFF_R7  =  28     	/* New ABI: arg3 */
+OFF_SP	=  (15*4)
+OFF_PC  =  (16*4)
+OFF_SR	=  (16*4+2*4)
+OFF_TRA	=  (16*4+6*4)
+
+#include <asm/entry-macros.S>
+
+ENTRY(exception_handler)
+	! stack
+	! r0 <- point sp
+	! r1
+	! pc
+	! sr
+	! r0 = temporary
+	! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
+	mov.l	r2,@-sp
+	mov.l	r3,@-sp
+	cli
+	mov.l	$cpu_mode,r2
+#ifdef CONFIG_SMP
+	mov.l	$cpuid,r3
+	mov.l	@r3,r3
+	mov.l	@r3,r3
+	shll2	r3
+	add	r3,r2
+#endif
+	mov.l	@r2,r0
+	mov.l	@(5*4,r15),r3	! previous SR
+	or	r0,r3		! set MD
+	tst	r0,r0
+	bf/s	1f		! previous mode check
+	 mov.l	r3,@(5*4,r15)	! update SR
+	! switch to kernel mode
+	mov.l	__md_bit,r0
+	mov.l	r0,@r2		! enter kernel mode
+	mov.l	$current_thread_info,r2
+#ifdef CONFIG_SMP
+	mov.l	$cpuid,r0
+	mov.l	@r0,r0
+	mov.l	@r0,r0
+	shll2	r0
+	add	r0,r2
+#endif
+	mov.l	@r2,r2
+	mov	#(THREAD_SIZE >> 8),r0
+	shll8	r0
+	add	r2,r0
+	mov	r15,r2		! r2 = user stack top
+	mov	r0,r15		! switch kernel stack
+	mov.l	r1,@-r15	! TRA
+	sts.l	macl, @-r15
+	sts.l	mach, @-r15
+	stc.l	gbr, @-r15
+	mov.l	@(5*4,r2),r0
+	mov.l	r0,@-r15	! original SR
+	sts.l	pr,@-r15
+	mov.l	@(4*4,r2),r0
+	mov.l	r0,@-r15	! original PC
+	mov	r2,r3
+	add	#(4+2)*4,r3	! rewind r0 - r3 + exception frame
+	mov.l	r3,@-r15	! original SP
+	mov.l	r14,@-r15
+	mov.l	r13,@-r15
+	mov.l	r12,@-r15
+	mov.l	r11,@-r15
+	mov.l	r10,@-r15
+	mov.l	r9,@-r15
+	mov.l	r8,@-r15
+	mov.l	r7,@-r15
+	mov.l	r6,@-r15
+	mov.l	r5,@-r15
+	mov.l	r4,@-r15
+	mov	r1,r9		! save TRA
+	mov	r2,r8		! copy user -> kernel stack
+	mov.l	@(0,r8),r3
+	mov.l	r3,@-r15
+	mov.l	@(4,r8),r2
+	mov.l	r2,@-r15
+	mov.l	@(12,r8),r1
+	mov.l	r1,@-r15
+	mov.l	@(8,r8),r0
+	bra	2f
+	 mov.l	r0,@-r15
+1:
+	! in kernel exception
+	mov	#(22-4-4-1)*4+4,r0
+	mov	r15,r2
+	sub	r0,r15
+	mov.l	@r2+,r0		! old R3
+	mov.l	r0,@-r15	
+	mov.l	@r2+,r0		! old R2
+	mov.l	r0,@-r15	
+	mov.l	@(4,r2),r0	! old R1
+	mov.l	r0,@-r15	
+	mov.l	@r2,r0		! old R0
+	mov.l	r0,@-r15
+	add	#8,r2
+	mov.l	@r2+,r3		! old PC
+	mov.l	@r2+,r0		! old SR
+	add	#-4,r2		! exception frame stub (sr)
+	mov.l	r1,@-r2		! TRA
+	sts.l	macl, @-r2
+	sts.l	mach, @-r2
+	stc.l	gbr, @-r2
+	mov.l	r0,@-r2		! save old SR
+	sts.l	pr,@-r2
+	mov.l	r3,@-r2		! save old PC
+	mov	r2,r0
+	add	#8*4,r0
+	mov.l	r0,@-r2		! save old SP
+	mov.l	r14,@-r2
+	mov.l	r13,@-r2
+	mov.l	r12,@-r2
+	mov.l	r11,@-r2
+	mov.l	r10,@-r2
+	mov.l	r9,@-r2
+	mov.l	r8,@-r2
+	mov.l	r7,@-r2
+	mov.l	r6,@-r2
+	mov.l	r5,@-r2
+	mov.l	r4,@-r2
+	mov	r1,r9
+	mov.l	@(OFF_R0,r15),r0
+	mov.l	@(OFF_R1,r15),r1
+	mov.l	@(OFF_R2,r15),r2
+	mov.l	@(OFF_R3,r15),r3
+2:
+	mov	#64,r8
+	cmp/hs	r8,r9
+	bt	interrupt_entry	! vec >= 64 is interrupt
+	mov	#31,r8
+	cmp/hs	r8,r9
+	bt	trap_entry	! 64 > vec >= 31  is trap
+#ifdef CONFIG_CPU_J2
+	mov	#16,r8
+	cmp/hs	r8,r9
+	bt	interrupt_entry	! 31 > vec >= 16 is interrupt
+#endif
+
+	mov.l	4f,r8
+	mov	r9,r4
+	shll2	r9
+	add	r9,r8
+	mov.l	@r8,r8		! exception handler address
+	tst	r8,r8
+	bf	3f
+	mov.l	8f,r8		! unhandled exception
+3:
+	mov.l	5f,r10
+	jmp	@r8
+	 lds	r10,pr
+
+interrupt_entry:
+	mov	r9,r4
+	mov	r15,r5
+	mov.l	6f,r9
+	mov.l	7f,r8
+	jmp	@r8
+	 lds	r9,pr
+
+	.align	2
+4:	.long	exception_handling_table
+5:	.long	ret_from_exception
+6:	.long	ret_from_irq
+7:	.long	do_IRQ
+8:	.long	exception_error
+
+trap_entry:
+	mov	#0x30,r8
+	cmp/ge	r8,r9		! vector 0x1f-0x2f is systemcall
+	bt	1f
+	mov     #0x1f,r9	! convert to unified SH2/3/4 trap number
+1:	
+	shll2	r9			! TRA
+	bra	system_call	! jump common systemcall entry
+	 mov	r9,r8
+	
+#if defined(CONFIG_SH_STANDARD_BIOS)
+	/* Unwind the stack and jmp to the debug entry */
+ENTRY(sh_bios_handler)
+	mov	r15,r0
+	add	#(22-4)*4-4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
+	mov	r15,r0
+	mov.l	@(OFF_SP,r0),r1
+	mov	#OFF_SR,r2
+	mov.l	@(r0,r2),r3
+	mov.l	r3,@-r1
+	mov	#OFF_SP,r2
+	mov.l	@(r0,r2),r3
+	mov.l	r3,@-r1
+	mov	r15,r0
+	add	#(22-4)*4-8,r0
+	mov.l	1f,r2
+	mov.l	@r2,r2
+	stc	sr,r3
+	mov.l	r2,@r0
+	mov.l	r3,@(4,r0)
+	mov.l	r1,@(8,r0)	
+	mov.l	@r15+, r0
+	mov.l	@r15+, r1
+	mov.l	@r15+, r2
+	mov.l	@r15+, r3
+	mov.l	@r15+, r4
+	mov.l	@r15+, r5
+	mov.l	@r15+, r6
+	mov.l	@r15+, r7
+	mov.l	@r15+, r8
+	mov.l	@r15+, r9
+	mov.l	@r15+, r10
+	mov.l	@r15+, r11
+	mov.l	@r15+, r12
+	mov.l	@r15+, r13
+	mov.l	@r15+, r14
+	add	#8,r15
+	lds.l	@r15+, pr
+	mov.l	@r15+,r15
+	rte
+	 nop
+	.align	2
+1:	.long	gdb_vbr_vector
+#endif /* CONFIG_SH_STANDARD_BIOS */
+
+ENTRY(address_error_trap_handler)
+	mov	r15,r4				! regs
+	mov	#OFF_PC,r0
+	mov.l	@(r0,r15),r6			! pc
+	mov.l	1f,r0
+	jmp	@r0
+	 mov	#0,r5				! writeaccess is unknown
+
+	.align	2
+1:	.long	do_address_error
+
+restore_all:
+	stc	sr,r0
+	or	#0xf0,r0
+	ldc	r0,sr				! all interrupt block (same BL = 1)
+	! restore special register
+	! overlap exception frame
+	mov	r15,r0
+	add	#17*4,r0
+	lds.l	@r0+,pr
+	add	#4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
+	mov	r15,r0
+	mov.l	$cpu_mode,r2
+#ifdef CONFIG_SMP
+	mov.l	$cpuid,r3
+	mov.l	@r3,r3
+	mov.l	@r3,r3
+	shll2	r3
+	add	r3,r2
+#endif
+	mov	#OFF_SR,r3
+	mov.l	@(r0,r3),r1
+	mov.l	__md_bit,r3
+	and	r1,r3				! copy MD bit
+	mov.l	r3,@r2
+	shll2	r1				! clear MD bit
+	shlr2	r1
+	mov.l	@(OFF_SP,r0),r2
+	add	#-8,r2
+	mov.l	r2,@(OFF_SP,r0)			! point exception frame top
+	mov.l	r1,@(4,r2)			! set sr
+	mov	#OFF_PC,r3
+	mov.l	@(r0,r3),r1
+	mov.l	r1,@r2				! set pc
+	get_current_thread_info r0, r1
+	mov.l	$current_thread_info,r1
+#ifdef CONFIG_SMP
+	mov.l	$cpuid,r3
+	mov.l	@r3,r3
+	mov.l	@r3,r3
+	shll2	r3
+	add	r3,r1
+#endif
+	mov.l	r0,@r1
+	mov.l	@r15+,r0
+	mov.l	@r15+,r1
+	mov.l	@r15+,r2
+	mov.l	@r15+,r3
+	mov.l	@r15+,r4
+	mov.l	@r15+,r5
+	mov.l	@r15+,r6
+	mov.l	@r15+,r7
+	mov.l	@r15+,r8
+	mov.l	@r15+,r9
+	mov.l	@r15+,r10
+	mov.l	@r15+,r11
+	mov.l	@r15+,r12
+	mov.l	@r15+,r13
+	mov.l	@r15+,r14
+	mov.l	@r15,r15
+	rte
+	 nop
+
+	.align 2
+__md_bit:
+	.long	0x40000000
+$current_thread_info:
+	.long	__current_thread_info
+$cpu_mode:	
+	.long	__cpu_mode
+#ifdef CONFIG_SMP
+$cpuid:
+	.long sh2_cpuid_addr
+#endif
+		
+! common exception handler
+#include "../../entry-common.S"
+
+#ifdef CONFIG_NR_CPUS
+#define NR_CPUS CONFIG_NR_CPUS
+#else
+#define NR_CPUS 1
+#endif
+	
+	.data
+! cpu operation mode 
+! bit30 = MD (compatible SH3/4)
+__cpu_mode:
+	.rept	NR_CPUS
+	.long	0x40000000
+	.endr
+
+#ifdef CONFIG_SMP
+.global sh2_cpuid_addr
+sh2_cpuid_addr:
+	.long	dummy_cpuid
+dummy_cpuid:
+	.long	0
+#endif
+		
+	.section	.bss
+__current_thread_info:
+	.rept	NR_CPUS
+	.long	0
+	.endr
+
+ENTRY(exception_handling_table)
+	.space	4*32
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/ex.S b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/ex.S
new file mode 100644
index 0000000..85b0bf8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/ex.S
@@ -0,0 +1,47 @@
+/*
+ * arch/sh/kernel/cpu/sh2/ex.S
+ *
+ * The SH-2 exception vector table
+ *
+ * Copyright (C) 2005 Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+
+!
+! convert Exception Vector to Exception Number
+!
+exception_entry:	
+no	=	0
+	.rept	256
+	mov.l	r1,@-sp
+	bra	exception_trampoline
+	mov	#no,r1
+no	=	no + 1
+	.endr
+exception_trampoline:
+	mov.l	r0,@-sp
+	mov.l	$exception_handler,r0
+	extu.b	r1,r1
+	jmp	@r0
+	  extu.w	r1,r1
+
+	.align	2
+$exception_entry:
+	.long	exception_entry
+$exception_handler:
+	.long	exception_handler
+!
+! Exception Vector Base
+!
+	.align	2
+ENTRY(vbr_base)
+vector	=	0
+	.rept	256
+	.long	exception_entry + vector * 6
+vector	=	vector + 1
+	.endr
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/probe.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/probe.c
new file mode 100644
index 0000000..a5bd036
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/probe.c
@@ -0,0 +1,74 @@
+/*
+ * arch/sh/kernel/cpu/sh2/probe.c
+ *
+ * CPU Subtype Probing for SH-2.
+ *
+ * Copyright (C) 2002 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/of_fdt.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+
+#if defined(CONFIG_CPU_J2)
+extern u32 __iomem *j2_ccr_base;
+static int __init scan_cache(unsigned long node, const char *uname,
+			     int depth, void *data)
+{
+	if (!of_flat_dt_is_compatible(node, "jcore,cache"))
+		return 0;
+
+	j2_ccr_base = (u32 __iomem *)of_flat_dt_translate_address(node);
+
+	return 1;
+}
+#endif
+
+void __ref cpu_probe(void)
+{
+#if defined(CONFIG_CPU_SUBTYPE_SH7619)
+	boot_cpu_data.type			= CPU_SH7619;
+	boot_cpu_data.dcache.ways		= 4;
+	boot_cpu_data.dcache.way_incr	= (1<<12);
+	boot_cpu_data.dcache.sets		= 256;
+	boot_cpu_data.dcache.entry_shift	= 4;
+	boot_cpu_data.dcache.linesz		= L1_CACHE_BYTES;
+	boot_cpu_data.dcache.flags		= 0;
+#endif
+
+#if defined(CONFIG_CPU_J2)
+#if defined(CONFIG_SMP)
+	unsigned cpu = hard_smp_processor_id();
+#else
+	unsigned cpu = 0;
+#endif
+	if (cpu == 0) of_scan_flat_dt(scan_cache, NULL);
+	if (j2_ccr_base) __raw_writel(0x80000303, j2_ccr_base + 4*cpu);
+	if (cpu != 0) return;
+	boot_cpu_data.type			= CPU_J2;
+
+	/* These defaults are appropriate for the original/current
+	 * J2 cache. Once there is a proper framework for getting cache
+	 * info from device tree, we should switch to that. */
+	boot_cpu_data.dcache.ways		= 1;
+	boot_cpu_data.dcache.sets		= 256;
+	boot_cpu_data.dcache.entry_shift	= 5;
+	boot_cpu_data.dcache.linesz		= 32;
+	boot_cpu_data.dcache.flags		= 0;
+
+	boot_cpu_data.flags |= CPU_HAS_CAS_L;
+#else
+	/*
+	 * SH-2 doesn't have separate caches
+	 */
+	boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
+#endif
+	boot_cpu_data.icache = boot_cpu_data.dcache;
+	boot_cpu_data.family = CPU_FAMILY_SH2;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/setup-sh7619.c
new file mode 100644
index 0000000..95796ad
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -0,0 +1,208 @@
+/*
+ * SH7619 Setup
+ *
+ *  Copyright (C) 2006  Yoshinori Sato
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_eth.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	WDT, EDMAC, CMT0, CMT1,
+	SCIF0, SCIF1, SCIF2,
+	HIF_HIFI, HIF_HIFBI,
+	DMAC0, DMAC1, DMAC2, DMAC3,
+	SIOF,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
+	INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
+	INTC_IRQ(IRQ4, 80), INTC_IRQ(IRQ5, 81),
+	INTC_IRQ(IRQ6, 82), INTC_IRQ(IRQ7, 83),
+	INTC_IRQ(WDT, 84), INTC_IRQ(EDMAC, 85),
+	INTC_IRQ(CMT0, 86), INTC_IRQ(CMT1, 87),
+	INTC_IRQ(SCIF0, 88), INTC_IRQ(SCIF0, 89),
+	INTC_IRQ(SCIF0, 90), INTC_IRQ(SCIF0, 91),
+	INTC_IRQ(SCIF1, 92), INTC_IRQ(SCIF1, 93),
+	INTC_IRQ(SCIF1, 94), INTC_IRQ(SCIF1, 95),
+	INTC_IRQ(SCIF2, 96), INTC_IRQ(SCIF2, 97),
+	INTC_IRQ(SCIF2, 98), INTC_IRQ(SCIF2, 99),
+	INTC_IRQ(HIF_HIFI, 100), INTC_IRQ(HIF_HIFBI, 101),
+	INTC_IRQ(DMAC0, 104), INTC_IRQ(DMAC1, 105),
+	INTC_IRQ(DMAC2, 106), INTC_IRQ(DMAC3, 107),
+	INTC_IRQ(SIOF, 108),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xf8140006, 0, 16, 4, /* IPRA */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+	{ 0xf8140008, 0, 16, 4, /* IPRB */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ 0xf8080000, 0, 16, 4, /* IPRC */ { WDT, EDMAC, CMT0, CMT1 } },
+	{ 0xf8080002, 0, 16, 4, /* IPRD */ { SCIF0, SCIF1, SCIF2 } },
+	{ 0xf8080004, 0, 16, 4, /* IPRE */ { HIF_HIFI, HIF_HIFBI } },
+	{ 0xf8080006, 0, 16, 4, /* IPRF */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
+	{ 0xf8080008, 0, 16, 4, /* IPRG */ { SIOF } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, NULL,
+			 NULL, prio_registers, NULL);
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xf8400000, 0x100),
+	DEFINE_RES_IRQ(88),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xf8410000, 0x100),
+	DEFINE_RES_IRQ(92),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xf8420000, 0x100),
+	DEFINE_RES_IRQ(96),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct sh_eth_plat_data eth_platform_data = {
+	.phy		= 1,
+	.edmac_endian	= EDMAC_LITTLE_ENDIAN,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource eth_resources[] = {
+	[0] = {
+		.start = 0xfb000000,
+		.end = 0xfb0001c7,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 85,
+		.end = 85,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device eth_device = {
+	.name = "sh7619-ether",
+	.id = -1,
+	.dev = {
+		.platform_data = &eth_platform_data,
+	},
+	.num_resources = ARRAY_SIZE(eth_resources),
+	.resource = eth_resources,
+};
+
+static struct sh_timer_config cmt_platform_data = {
+	.channels_mask = 3,
+};
+
+static struct resource cmt_resources[] = {
+	DEFINE_RES_MEM(0xf84a0070, 0x10),
+	DEFINE_RES_IRQ(86),
+	DEFINE_RES_IRQ(87),
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh-cmt-16",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
+static struct platform_device *sh7619_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&eth_device,
+	&cmt_device,
+};
+
+static int __init sh7619_devices_setup(void)
+{
+	return platform_add_devices(sh7619_devices,
+				    ARRAY_SIZE(sh7619_devices));
+}
+arch_initcall(sh7619_devices_setup);
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
+
+static struct platform_device *sh7619_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&cmt_device,
+};
+
+#define STBCR3 0xf80a0000
+
+void __init plat_early_device_setup(void)
+{
+	/* enable CMT clock */
+	__raw_writeb(__raw_readb(STBCR3) & ~0x10, STBCR3);
+
+	early_platform_add_devices(sh7619_early_devices,
+				   ARRAY_SIZE(sh7619_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/smp-j2.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/smp-j2.c
new file mode 100644
index 0000000..6ccd7e4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2/smp-j2.c
@@ -0,0 +1,139 @@
+/*
+ * SMP support for J2 processor
+ *
+ * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/cmpxchg.h>
+
+DEFINE_PER_CPU(unsigned, j2_ipi_messages);
+
+extern u32 *sh2_cpuid_addr;
+static u32 *j2_ipi_trigger;
+static int j2_ipi_irq;
+
+static irqreturn_t j2_ipi_interrupt_handler(int irq, void *arg)
+{
+	unsigned cpu = hard_smp_processor_id();
+	volatile unsigned *pmsg = &per_cpu(j2_ipi_messages, cpu);
+	unsigned messages, i;
+
+	do messages = *pmsg;
+	while (cmpxchg(pmsg, messages, 0) != messages);
+
+	if (!messages) return IRQ_NONE;
+
+	for (i=0; i<SMP_MSG_NR; i++)
+		if (messages & (1U<<i))
+			smp_message_recv(i);
+
+	return IRQ_HANDLED;
+}
+
+static void j2_smp_setup(void)
+{
+}
+
+static void j2_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *np;
+	unsigned i, max = 1;
+
+	np = of_find_compatible_node(NULL, NULL, "jcore,ipi-controller");
+	if (!np)
+		goto out;
+
+	j2_ipi_irq = irq_of_parse_and_map(np, 0);
+	j2_ipi_trigger = of_iomap(np, 0);
+	if (!j2_ipi_irq || !j2_ipi_trigger)
+		goto out;
+
+	np = of_find_compatible_node(NULL, NULL, "jcore,cpuid-mmio");
+	if (!np)
+		goto out;
+
+	sh2_cpuid_addr = of_iomap(np, 0);
+	if (!sh2_cpuid_addr)
+		goto out;
+
+	if (request_irq(j2_ipi_irq, j2_ipi_interrupt_handler, IRQF_PERCPU,
+			"ipi", (void *)j2_ipi_interrupt_handler) != 0)
+		goto out;
+
+	max = max_cpus;
+out:
+	/* Disable any cpus past max_cpus, or all secondaries if we didn't
+	 * get the necessary resources to support SMP. */
+	for (i=max; i<NR_CPUS; i++) {
+		set_cpu_possible(i, false);
+		set_cpu_present(i, false);
+	}
+}
+
+static void j2_start_cpu(unsigned int cpu, unsigned long entry_point)
+{
+	struct device_node *np;
+	u32 regs[2];
+	void __iomem *release, *initpc;
+
+	if (!cpu) return;
+
+	np = of_get_cpu_node(cpu, NULL);
+	if (!np) return;
+
+	if (of_property_read_u32_array(np, "cpu-release-addr", regs, 2)) return;
+	release = ioremap_nocache(regs[0], sizeof(u32));
+	initpc = ioremap_nocache(regs[1], sizeof(u32));
+
+	__raw_writel(entry_point, initpc);
+	__raw_writel(1, release);
+
+	iounmap(initpc);
+	iounmap(release);
+
+	pr_info("J2 SMP: requested start of cpu %u\n", cpu);
+}
+
+static unsigned int j2_smp_processor_id(void)
+{
+	return __raw_readl(sh2_cpuid_addr);
+}
+
+static void j2_send_ipi(unsigned int cpu, unsigned int message)
+{
+	volatile unsigned *pmsg;
+	unsigned old;
+	unsigned long val;
+
+	/* There is only one IPI interrupt shared by all messages, so
+	 * we keep a separate interrupt flag per message type in sw. */
+	pmsg = &per_cpu(j2_ipi_messages, cpu);
+	do old = *pmsg;
+	while (cmpxchg(pmsg, old, old|(1U<<message)) != old);
+
+	/* Generate the actual interrupt by writing to CCRn bit 28. */
+	val = __raw_readl(j2_ipi_trigger + cpu);
+	__raw_writel(val | (1U<<28), j2_ipi_trigger + cpu);
+}
+
+static struct plat_smp_ops j2_smp_ops = {
+	.smp_setup		= j2_smp_setup,
+	.prepare_cpus		= j2_prepare_cpus,
+	.start_cpu		= j2_start_cpu,
+	.smp_processor_id	= j2_smp_processor_id,
+	.send_ipi		= j2_send_ipi,
+	.cpu_die		= native_cpu_die,
+	.cpu_disable		= native_cpu_disable,
+	.play_dead		= native_play_dead,
+};
+
+CPU_METHOD_OF_DECLARE(j2_cpu_method, "jcore,spin-table", &j2_smp_ops);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/Makefile b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/Makefile
new file mode 100644
index 0000000..2a7515b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/Makefile
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Linux/SuperH SH-2A backends.
+#
+
+obj-y	:= common.o probe.o opcode_helper.o
+
+common-y	+= ex.o entry.o
+
+obj-$(CONFIG_SH_FPU)	+= fpu.o
+
+obj-$(CONFIG_CPU_SUBTYPE_SH7201)	+= setup-sh7201.o clock-sh7201.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7203)	+= setup-sh7203.o clock-sh7203.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7263)	+= setup-sh7203.o clock-sh7203.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7264)	+= setup-sh7264.o clock-sh7264.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7206)	+= setup-sh7206.o clock-sh7206.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7269)	+= setup-sh7269.o clock-sh7269.o
+obj-$(CONFIG_CPU_SUBTYPE_MXG)		+= setup-mxg.o clock-sh7206.o
+
+# Pinmux setup
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7203)	:= pinmux-sh7203.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7264)	:= pinmux-sh7264.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7269)	:= pinmux-sh7269.o
+
+obj-$(CONFIG_GPIOLIB)			+= $(pinmux-y)
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
new file mode 100644
index 0000000..532a36c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
@@ -0,0 +1,85 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+ *
+ * SH7201 support for the clock framework
+ *
+ *  Copyright (C) 2008 Peter Griffin  <pgriffin@mpc-data.co.uk>
+ *
+ * Based on clock-sh4.c
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static const int pll1rate[]={1,2,3,4,6,8};
+static const int pfc_divisors[]={1,2,3,4,6,8,12};
+#define ifc_divisors pfc_divisors
+
+static unsigned int pll2_mult;
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate = 10000000 * pll2_mult *
+	       pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
+}
+
+static struct sh_clk_ops sh7201_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static unsigned long module_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(FREQCR) & 0x0007);
+	return clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7201_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static unsigned long bus_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(FREQCR) & 0x0007);
+	return clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7201_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static unsigned long cpu_clk_recalc(struct clk *clk)
+{
+	int idx = ((__raw_readw(FREQCR) >> 4) & 0x0007);
+	return clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7201_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct sh_clk_ops *sh7201_clk_ops[] = {
+	&sh7201_master_clk_ops,
+	&sh7201_module_clk_ops,
+	&sh7201_bus_clk_ops,
+	&sh7201_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+	if (test_mode_pin(MODE_PIN1 | MODE_PIN0))
+		pll2_mult = 1;
+	else if (test_mode_pin(MODE_PIN1))
+		pll2_mult = 2;
+	else
+		pll2_mult = 4;
+
+	if (idx < ARRAY_SIZE(sh7201_clk_ops))
+		*ops = sh7201_clk_ops[idx];
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/clock-sh7203.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
new file mode 100644
index 0000000..529f719
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
@@ -0,0 +1,81 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/clock-sh7203.c
+ *
+ * SH7203 support for the clock framework
+ *
+ *  Copyright (C) 2007 Kieran Bingham (MPC-Data Ltd)
+ *
+ * Based on clock-sh7263.c
+ *  Copyright (C) 2006  Yoshinori Sato
+ *
+ * Based on clock-sh4.c
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static const int pll1rate[]={8,12,16,0};
+static const int pfc_divisors[]={1,2,3,4,6,8,12};
+#define ifc_divisors pfc_divisors
+
+static unsigned int pll2_mult;
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * pll2_mult;
+}
+
+static struct sh_clk_ops sh7203_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static unsigned long module_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(FREQCR) & 0x0007);
+	return clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7203_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static unsigned long bus_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(FREQCR) & 0x0007);
+	return clk->parent->rate / pfc_divisors[idx-2];
+}
+
+static struct sh_clk_ops sh7203_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static struct sh_clk_ops sh7203_cpu_clk_ops = {
+	.recalc		= followparent_recalc,
+};
+
+static struct sh_clk_ops *sh7203_clk_ops[] = {
+	&sh7203_master_clk_ops,
+	&sh7203_module_clk_ops,
+	&sh7203_bus_clk_ops,
+	&sh7203_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+	if (test_mode_pin(MODE_PIN1))
+		pll2_mult = 4;
+	else if (test_mode_pin(MODE_PIN0))
+		pll2_mult = 2;
+	else
+		pll2_mult = 1;
+
+	if (idx < ARRAY_SIZE(sh7203_clk_ops))
+		*ops = sh7203_clk_ops[idx];
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
new file mode 100644
index 0000000..1777898
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
@@ -0,0 +1,83 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/clock-sh7206.c
+ *
+ * SH7206 support for the clock framework
+ *
+ *  Copyright (C) 2006  Yoshinori Sato
+ *
+ * Based on clock-sh4.c
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static const int pll1rate[]={1,2,3,4,6,8};
+static const int pfc_divisors[]={1,2,3,4,6,8,12};
+#define ifc_divisors pfc_divisors
+
+static unsigned int pll2_mult;
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
+}
+
+static struct sh_clk_ops sh7206_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static unsigned long module_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(FREQCR) & 0x0007);
+	return clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7206_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static unsigned long bus_clk_recalc(struct clk *clk)
+{
+	return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
+}
+
+static struct sh_clk_ops sh7206_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static unsigned long cpu_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(FREQCR) & 0x0007);
+	return clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7206_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct sh_clk_ops *sh7206_clk_ops[] = {
+	&sh7206_master_clk_ops,
+	&sh7206_module_clk_ops,
+	&sh7206_bus_clk_ops,
+	&sh7206_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+	if (test_mode_pin(MODE_PIN2 | MODE_PIN1 | MODE_PIN0))
+		pll2_mult = 1;
+	else if (test_mode_pin(MODE_PIN2 | MODE_PIN1))
+		pll2_mult = 2;
+	else if (test_mode_pin(MODE_PIN1))
+		pll2_mult = 4;
+
+	if (idx < ARRAY_SIZE(sh7206_clk_ops))
+		*ops = sh7206_clk_ops[idx];
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/clock-sh7264.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/clock-sh7264.c
new file mode 100644
index 0000000..7e06e39
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/clock-sh7264.c
@@ -0,0 +1,160 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/clock-sh7264.c
+ *
+ * SH7264 clock framework support
+ *
+ * Copyright (C) 2012  Phil Edworthy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <asm/clock.h>
+
+/* SH7264 registers */
+#define FRQCR		0xfffe0010
+#define STBCR3		0xfffe0408
+#define STBCR4		0xfffe040c
+#define STBCR5		0xfffe0410
+#define STBCR6		0xfffe0414
+#define STBCR7		0xfffe0418
+#define STBCR8		0xfffe041c
+
+static const unsigned int pll1rate[] = {8, 12};
+
+static unsigned int pll1_div;
+
+/* Fixed 32 KHz root clock for RTC */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 18000000,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	unsigned long rate = clk->parent->rate / pll1_div;
+	return rate * pll1rate[(__raw_readw(FRQCR) >> 8) & 1];
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&pll_clk,
+};
+
+static int div2[] = { 1, 2, 3, 4, 6, 8, 12 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I, DIV4_P,
+       DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
+
+/* The mask field specifies the div2 entries that are valid */
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4(FRQCR, 4, 0x7,  CLK_ENABLE_REG_16BIT
+					| CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4(FRQCR, 0, 0x78, CLK_ENABLE_REG_16BIT),
+};
+
+enum {	MSTP77, MSTP74, MSTP72,
+	MSTP60,
+	MSTP35, MSTP34, MSTP33, MSTP32, MSTP30,
+	MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP77] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR7, 7, 0), /* SCIF */
+	[MSTP74] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR7, 4, 0), /* VDC */
+	[MSTP72] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR7, 2, 0), /* CMT */
+	[MSTP60] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR6, 0, 0), /* USB */
+	[MSTP35] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR3, 6, 0), /* MTU2 */
+	[MSTP34] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR3, 4, 0), /* SDHI0 */
+	[MSTP33] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR3, 3, 0), /* SDHI1 */
+	[MSTP32] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR3, 2, 0), /* ADC */
+	[MSTP30] = SH_CLK_MSTP8(&r_clk, STBCR3, 0, 0),	/* RTC */
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+
+	/* MSTP clocks */
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP77]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP77]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP77]),
+	CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP77]),
+	CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP77]),
+	CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP77]),
+	CLKDEV_ICK_ID("fck", "sh-sci.6", &mstp_clks[MSTP77]),
+	CLKDEV_ICK_ID("fck", "sh-sci.7", &mstp_clks[MSTP77]),
+	CLKDEV_CON_ID("vdc3", &mstp_clks[MSTP74]),
+	CLKDEV_ICK_ID("fck", "sh-cmt-16.0", &mstp_clks[MSTP72]),
+	CLKDEV_CON_ID("usb0", &mstp_clks[MSTP60]),
+	CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP35]),
+	CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP34]),
+	CLKDEV_CON_ID("sdhi1", &mstp_clks[MSTP33]),
+	CLKDEV_CON_ID("adc0", &mstp_clks[MSTP32]),
+	CLKDEV_CON_ID("rtc0", &mstp_clks[MSTP30]),
+};
+
+int __init arch_clk_init(void)
+{
+	int k, ret = 0;
+
+	if (test_mode_pin(MODE_PIN0)) {
+		if (test_mode_pin(MODE_PIN1))
+			pll1_div = 3;
+		else
+			pll1_div = 4;
+	} else
+		pll1_div = 1;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	return ret;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/clock-sh7269.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/clock-sh7269.c
new file mode 100644
index 0000000..663a97b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/clock-sh7269.c
@@ -0,0 +1,184 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/clock-sh7269.c
+ *
+ * SH7269 clock framework support
+ *
+ * Copyright (C) 2012  Phil Edworthy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <asm/clock.h>
+
+/* SH7269 registers */
+#define FRQCR		0xfffe0010
+#define STBCR3 		0xfffe0408
+#define STBCR4 		0xfffe040c
+#define STBCR5 		0xfffe0410
+#define STBCR6 		0xfffe0414
+#define STBCR7 		0xfffe0418
+
+#define PLL_RATE 20
+
+/* Fixed 32 KHz root clock for RTC */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 13340000,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	return clk->parent->rate * PLL_RATE;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral0_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 8;
+}
+
+static struct sh_clk_ops peripheral0_clk_ops = {
+	.recalc		= peripheral0_recalc,
+};
+
+static struct clk peripheral0_clk = {
+	.ops		= &peripheral0_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral1_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 4;
+}
+
+static struct sh_clk_ops peripheral1_clk_ops = {
+	.recalc		= peripheral1_recalc,
+};
+
+static struct clk peripheral1_clk = {
+	.ops		= &peripheral1_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&pll_clk,
+	&peripheral0_clk,
+	&peripheral1_clk,
+};
+
+static int div2[] = { 1, 2, 0, 4 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I, DIV4_B,
+       DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
+
+/* The mask field specifies the div2 entries that are valid */
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I]  = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
+					| CLK_ENABLE_ON_INIT),
+	[DIV4_B]  = DIV4(FRQCR, 4, 0xA, CLK_ENABLE_REG_16BIT
+					| CLK_ENABLE_ON_INIT),
+};
+
+enum { MSTP72,
+	MSTP60,
+	MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
+	MSTP35, MSTP32, MSTP30,
+	MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP72] = SH_CLK_MSTP8(&peripheral0_clk, STBCR7, 2, 0), /* CMT */
+	[MSTP60] = SH_CLK_MSTP8(&peripheral1_clk, STBCR6, 0, 0), /* USB */
+	[MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
+	[MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
+	[MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
+	[MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
+	[MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
+	[MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
+	[MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
+	[MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
+	[MSTP35] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 5, 0), /* MTU2 */
+	[MSTP32] = SH_CLK_MSTP8(&peripheral1_clk, STBCR3, 2, 0), /* ADC */
+	[MSTP30] = SH_CLK_MSTP8(&r_clk, STBCR3, 0, 0), /* RTC */
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+	CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+
+	/* MSTP clocks */
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP47]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP46]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP45]),
+	CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP44]),
+	CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP43]),
+	CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP42]),
+	CLKDEV_ICK_ID("fck", "sh-sci.6", &mstp_clks[MSTP41]),
+	CLKDEV_ICK_ID("fck", "sh-sci.7", &mstp_clks[MSTP40]),
+	CLKDEV_ICK_ID("fck", "sh-cmt-16.0", &mstp_clks[MSTP72]),
+	CLKDEV_CON_ID("usb0", &mstp_clks[MSTP60]),
+	CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP35]),
+	CLKDEV_CON_ID("adc0", &mstp_clks[MSTP32]),
+	CLKDEV_CON_ID("rtc0", &mstp_clks[MSTP30]),
+};
+
+int __init arch_clk_init(void)
+{
+	int k, ret = 0;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	return ret;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/entry.S b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/entry.S
new file mode 100644
index 0000000..da77a8e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/entry.S
@@ -0,0 +1,250 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/entry.S
+ *
+ * The SH-2A exception entry
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ * Based on arch/sh/kernel/cpu/sh2/entry.S
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <cpu/mmu_context.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/page.h>
+	
+/* Offsets to the stack */
+OFF_R0  =  0		/* Return value. New ABI also arg4 */
+OFF_R1  =  4     	/* New ABI: arg5 */
+OFF_R2  =  8     	/* New ABI: arg6 */
+OFF_R3  =  12     	/* New ABI: syscall_nr */
+OFF_R4  =  16     	/* New ABI: arg0 */
+OFF_R5  =  20     	/* New ABI: arg1 */
+OFF_R6  =  24     	/* New ABI: arg2 */
+OFF_R7  =  28     	/* New ABI: arg3 */
+OFF_SP	=  (15*4)
+OFF_PC  =  (16*4)
+OFF_SR	=  (16*4+2*4)
+OFF_TRA	=  (16*4+6*4)
+
+#include <asm/entry-macros.S>
+
+ENTRY(exception_handler)
+	! stack
+	! r0 <- point sp
+	! r1
+	! pc
+	! sr
+	! r0 = temporary
+	! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
+	mov.l	r2,@-sp
+	cli
+	mov.l	$cpu_mode,r2
+	bld.b	#6,@(0,r2)	!previus SR.MD
+	bst.b	#6,@(4*4,r15)	!set cpu mode to SR.MD
+	bt	1f
+	! switch to kernel mode
+	bset.b	#6,@(0,r2)	!set SR.MD
+	mov.l	$current_thread_info,r2
+	mov.l	@r2,r2
+	mov	#(THREAD_SIZE >> 8),r0
+	shll8	r0
+	add	r2,r0		! r0 = kernel stack tail
+	mov	r15,r2		! r2 = user stack top
+	mov	r0,r15		! switch kernel stack
+	mov.l	r1,@-r15	! TRA
+	sts.l	macl, @-r15
+	sts.l	mach, @-r15
+	stc.l	gbr, @-r15
+	mov.l	@(4*4,r2),r0
+	mov.l	r0,@-r15	! original SR
+	sts.l	pr,@-r15
+	mov.l	@(3*4,r2),r0
+	mov.l	r0,@-r15	! original PC
+	mov	r2,r0
+	add	#(3+2)*4,r0	! rewind r0 - r3 + exception frame
+	lds	r0,pr		! pr = original SP
+	movmu.l	r3,@-r15	! save regs
+	mov	r2,r8		! r8 =  previus stack top
+	mov	r1,r9		! r9 = interrupt vector
+	! restore previous stack
+	mov.l	@r8+,r2
+	mov.l	@r8+,r0
+	mov.l	@r8+,r1
+	bra	2f
+	 movml.l r2,@-r15
+1:
+	! in kernel exception
+	mov	r15,r2
+	add	#-((OFF_TRA + 4) - OFF_PC) + 5*4,r15
+	movmu.l	r3,@-r15
+	mov	r2,r8		! r8 = previous stack top
+	mov	r1,r9		! r9 = interrupt vector
+	! restore exception frame & regs
+	mov.l	@r8+,r2		! old R2
+	mov.l	@r8+,r0		! old R0
+	mov.l	@r8+,r1		! old R1
+	mov.l	@r8+,r10	! old PC
+	mov.l	@r8+,r11	! old SR
+	movml.l	r2,@-r15
+	mov.l	r10,@(OFF_PC,r15)
+	mov.l	r11,@(OFF_SR,r15)
+	mov.l	r8,@(OFF_SP,r15)	! save old sp
+	mov	r15,r8
+	add	#OFF_TRA + 4,r8
+	mov.l	r9,@-r8
+	sts.l	macl,@-r8
+	sts.l	mach,@-r8
+	stc.l	gbr,@-r8
+	add	#-4,r8
+	sts.l	pr,@-r8
+2:
+	! dispatch exception / interrupt
+	mov	#64,r8
+	cmp/hs	r8,r9
+	bt	interrupt_entry	! vec >= 64 is interrupt
+	mov	#31,r8
+	cmp/hs	r8,r9
+	bt	trap_entry	! 64 > vec >= 31  is trap
+
+	mov.l	4f,r8
+	mov	r9,r4
+	shll2	r9
+	add	r9,r8
+	mov.l	@r8,r8		! exception handler address
+	tst	r8,r8
+	bf	3f
+	mov.l	8f,r8		! unhandled exception
+3:
+	mov.l	5f,r10
+	jmp	@r8
+	 lds	r10,pr
+
+interrupt_entry:
+	mov	r9,r4
+	mov	r15,r5
+	mov.l	7f,r8
+	mov.l	6f,r9
+	jmp	@r8
+	 lds	r9,pr
+
+	.align	2
+4:	.long	exception_handling_table
+5:	.long	ret_from_exception
+6:	.long	ret_from_irq
+7:	.long	do_IRQ
+8:	.long	exception_error
+
+trap_entry:
+	mov	#0x30,r8
+	cmp/ge	r8,r9		! vector 0x1f-0x2f is systemcall
+	bt	1f
+	mov     #0x1f,r9	! convert to unified SH2/3/4 trap number
+1:	
+	shll2	r9			! TRA
+	bra	system_call	! jump common systemcall entry
+	 mov	r9,r8
+	
+#if defined(CONFIG_SH_STANDARD_BIOS)
+	/* Unwind the stack and jmp to the debug entry */
+ENTRY(sh_bios_handler)
+	mov	r15,r0
+	add	#(22-4)*4-4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
+	mov	r15,r0
+	mov.l	@(OFF_SP,r0),r1
+	mov.l	@(OFF_SR,r2),r3
+	mov.l	r3,@-r1
+	mov.l	@(OFF_SP,r2),r3
+	mov.l	r3,@-r1
+	mov	r15,r0
+	add	#(22-4)*4-8,r0
+	mov.l	1f,r2
+	mov.l	@r2,r2
+	stc	sr,r3
+	mov.l	r2,@r0
+	mov.l	r3,@(4,r0)
+	mov.l	r1,@(8,r0)
+	movml.l	@r15+,r14
+	add	#8,r15
+	lds.l	@r15+, pr
+	mov.l	@r15+,r15
+	rte
+	 nop
+	.align	2
+1:	.long	gdb_vbr_vector
+#endif /* CONFIG_SH_STANDARD_BIOS */
+
+ENTRY(address_error_trap_handler)
+	mov	r15,r4				! regs
+	mov.l	@(OFF_PC,r15),r6		! pc
+	mov.l	1f,r0
+	jmp	@r0
+	 mov	#0,r5				! writeaccess is unknown
+
+	.align	2
+1:	.long	do_address_error
+
+restore_all:
+	stc	sr,r0
+	or	#0xf0,r0
+	ldc	r0,sr				! all interrupt block (same BL = 1)
+	! restore special register
+	! overlap exception frame
+	mov	r15,r0
+	add	#17*4,r0
+	lds.l	@r0+,pr
+	add	#4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
+	mov	r15,r0
+	mov.l	$cpu_mode,r2
+	bld.b	#6,@(OFF_SR,r15)
+	bst.b	#6,@(0,r2)			! save CPU mode
+	mov.l	@(OFF_SR,r0),r1
+	shll2	r1
+	shlr2	r1				! clear MD bit
+	mov.l	@(OFF_SP,r0),r2
+	add	#-8,r2
+	mov.l	r2,@(OFF_SP,r0)			! point exception frame top
+	mov.l	r1,@(4,r2)			! set sr
+	mov.l	@(OFF_PC,r0),r1
+	mov.l	r1,@r2				! set pc
+	get_current_thread_info r0, r1
+	mov.l	$current_thread_info,r1
+	mov.l	r0,@r1
+	movml.l	@r15+,r14
+	mov.l	@r15,r15
+	rte
+	 nop
+
+	.align 2
+$current_thread_info:
+	.long	__current_thread_info
+$cpu_mode:	
+	.long	__cpu_mode
+		
+! common exception handler
+#include "../../entry-common.S"
+	
+	.data
+! cpu operation mode 
+! bit30 = MD (compatible SH3/4)
+__cpu_mode:
+	.long	0x40000000
+		
+	.section	.bss
+__current_thread_info:
+	.long	0
+
+ENTRY(exception_handling_table)
+	.space	4*32
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/ex.S b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/ex.S
new file mode 100644
index 0000000..4568066
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/ex.S
@@ -0,0 +1,73 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/ex.S
+ *
+ * The SH-2A exception vector table
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+
+!
+! convert Exception Vector to Exception Number
+!
+
+! exception no 0 to 255
+exception_entry0:
+no	=	0
+	.rept	256
+	mov.l	r1,@-sp
+	bra	exception_trampoline0
+	mov	#no,r1
+no	=	no + 1
+	.endr
+exception_trampoline0:
+	mov.l	r0,@-sp
+	mov.l	1f,r0
+	extu.b	r1,r1
+	jmp	@r0
+	  extu.w	r1,r1
+	 
+	.align	2
+1:	.long	exception_handler
+
+! exception no 256 to 511
+exception_entry1:
+no	=	0
+	.rept	256
+	mov.l	r1,@-sp
+	bra	exception_trampoline1
+	mov	#no,r1
+no	=	no + 1
+	.endr
+exception_trampoline1:
+	mov.l	r0,@-sp
+	extu.b	r1,r1
+	movi20	#0x100,r0
+	add	r0,r1
+	mov.l	1f,r0
+	jmp	@r0
+	  extu.w	r1,r1
+	
+	.align	2
+1:	.long	exception_handler
+
+	!
+! Exception Vector Base
+!
+	.align	2
+ENTRY(vbr_base)
+vector	=	0
+	.rept	256
+	.long	exception_entry0 + vector * 6
+vector	=	vector + 1
+	.endr
+vector	=	0
+	.rept	256
+	.long	exception_entry1 + vector * 6
+vector	=	vector + 1
+	.endr
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/fpu.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/fpu.c
new file mode 100644
index 0000000..352f894
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/fpu.c
@@ -0,0 +1,575 @@
+/*
+ * Save/restore floating point context for signal handlers.
+ *
+ * Copyright (C) 1999, 2000  Kaz Kojima & Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * FIXME! These routines can be optimized in big endian case.
+ */
+#include <linux/sched/signal.h>
+#include <linux/signal.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/fpu.h>
+#include <asm/traps.h>
+
+/* The PR (precision) bit in the FP Status Register must be clear when
+ * an frchg instruction is executed, otherwise the instruction is undefined.
+ * Executing frchg with PR set causes a trap on some SH4 implementations.
+ */
+
+#define FPSCR_RCHG 0x00000000
+
+
+/*
+ * Save FPU registers onto task structure.
+ */
+void save_fpu(struct task_struct *tsk)
+{
+	unsigned long dummy;
+
+	enable_fpu();
+	asm volatile("sts.l	fpul, @-%0\n\t"
+		     "sts.l	fpscr, @-%0\n\t"
+		     "fmov.s	fr15, @-%0\n\t"
+		     "fmov.s	fr14, @-%0\n\t"
+		     "fmov.s	fr13, @-%0\n\t"
+		     "fmov.s	fr12, @-%0\n\t"
+		     "fmov.s	fr11, @-%0\n\t"
+		     "fmov.s	fr10, @-%0\n\t"
+		     "fmov.s	fr9, @-%0\n\t"
+		     "fmov.s	fr8, @-%0\n\t"
+		     "fmov.s	fr7, @-%0\n\t"
+		     "fmov.s	fr6, @-%0\n\t"
+		     "fmov.s	fr5, @-%0\n\t"
+		     "fmov.s	fr4, @-%0\n\t"
+		     "fmov.s	fr3, @-%0\n\t"
+		     "fmov.s	fr2, @-%0\n\t"
+		     "fmov.s	fr1, @-%0\n\t"
+		     "fmov.s	fr0, @-%0\n\t"
+		     "lds	%3, fpscr\n\t"
+		     : "=r" (dummy)
+		     : "0" ((char *)(&tsk->thread.xstate->hardfpu.status)),
+		       "r" (FPSCR_RCHG),
+		       "r" (FPSCR_INIT)
+		     : "memory");
+
+	disable_fpu();
+}
+
+void restore_fpu(struct task_struct *tsk)
+{
+	unsigned long dummy;
+
+	enable_fpu();
+	asm volatile("fmov.s	@%0+, fr0\n\t"
+		     "fmov.s	@%0+, fr1\n\t"
+		     "fmov.s	@%0+, fr2\n\t"
+		     "fmov.s	@%0+, fr3\n\t"
+		     "fmov.s	@%0+, fr4\n\t"
+		     "fmov.s	@%0+, fr5\n\t"
+		     "fmov.s	@%0+, fr6\n\t"
+		     "fmov.s	@%0+, fr7\n\t"
+		     "fmov.s	@%0+, fr8\n\t"
+		     "fmov.s	@%0+, fr9\n\t"
+		     "fmov.s	@%0+, fr10\n\t"
+		     "fmov.s	@%0+, fr11\n\t"
+		     "fmov.s	@%0+, fr12\n\t"
+		     "fmov.s	@%0+, fr13\n\t"
+		     "fmov.s	@%0+, fr14\n\t"
+		     "fmov.s	@%0+, fr15\n\t"
+		     "lds.l	@%0+, fpscr\n\t"
+		     "lds.l	@%0+, fpul\n\t"
+		     : "=r" (dummy)
+		     : "0" (tsk->thread.xstate), "r" (FPSCR_RCHG)
+		     : "memory");
+	disable_fpu();
+}
+
+/*
+ *	Emulate arithmetic ops on denormalized number for some FPU insns.
+ */
+
+/* denormalized float * float */
+static int denormal_mulf(int hx, int hy)
+{
+	unsigned int ix, iy;
+	unsigned long long m, n;
+	int exp, w;
+
+	ix = hx & 0x7fffffff;
+	iy = hy & 0x7fffffff;
+	if (iy < 0x00800000 || ix == 0)
+		return ((hx ^ hy) & 0x80000000);
+
+	exp = (iy & 0x7f800000) >> 23;
+	ix &= 0x007fffff;
+	iy = (iy & 0x007fffff) | 0x00800000;
+	m = (unsigned long long)ix * iy;
+	n = m;
+	w = -1;
+	while (n) { n >>= 1; w++; }
+
+	/* FIXME: use guard bits */
+	exp += w - 126 - 46;
+	if (exp > 0)
+		ix = ((int) (m >> (w - 23)) & 0x007fffff) | (exp << 23);
+	else if (exp + 22 >= 0)
+		ix = (int) (m >> (w - 22 - exp)) & 0x007fffff;
+	else
+		ix = 0;
+
+	ix |= (hx ^ hy) & 0x80000000;
+	return ix;
+}
+
+/* denormalized double * double */
+static void mult64(unsigned long long x, unsigned long long y,
+		unsigned long long *highp, unsigned long long *lowp)
+{
+	unsigned long long sub0, sub1, sub2, sub3;
+	unsigned long long high, low;
+
+	sub0 = (x >> 32) * (unsigned long) (y >> 32);
+	sub1 = (x & 0xffffffffLL) * (unsigned long) (y >> 32);
+	sub2 = (x >> 32) * (unsigned long) (y & 0xffffffffLL);
+	sub3 = (x & 0xffffffffLL) * (unsigned long) (y & 0xffffffffLL);
+	low = sub3;
+	high = 0LL;
+	sub3 += (sub1 << 32);
+	if (low > sub3)
+		high++;
+	low = sub3;
+	sub3 += (sub2 << 32);
+	if (low > sub3)
+		high++;
+	low = sub3;
+	high += (sub1 >> 32) + (sub2 >> 32);
+	high += sub0;
+	*lowp = low;
+	*highp = high;
+}
+
+static inline long long rshift64(unsigned long long mh,
+		unsigned long long ml, int n)
+{
+	if (n >= 64)
+		return mh >> (n - 64);
+	return (mh << (64 - n)) | (ml >> n);
+}
+
+static long long denormal_muld(long long hx, long long hy)
+{
+	unsigned long long ix, iy;
+	unsigned long long mh, ml, nh, nl;
+	int exp, w;
+
+	ix = hx & 0x7fffffffffffffffLL;
+	iy = hy & 0x7fffffffffffffffLL;
+	if (iy < 0x0010000000000000LL || ix == 0)
+		return ((hx ^ hy) & 0x8000000000000000LL);
+
+	exp = (iy & 0x7ff0000000000000LL) >> 52;
+	ix &= 0x000fffffffffffffLL;
+	iy = (iy & 0x000fffffffffffffLL) | 0x0010000000000000LL;
+	mult64(ix, iy, &mh, &ml);
+	nh = mh;
+	nl = ml;
+	w = -1;
+	if (nh) {
+		while (nh) { nh >>= 1; w++;}
+		w += 64;
+	} else
+		while (nl) { nl >>= 1; w++;}
+
+	/* FIXME: use guard bits */
+	exp += w - 1022 - 52 * 2;
+	if (exp > 0)
+		ix = (rshift64(mh, ml, w - 52) & 0x000fffffffffffffLL)
+			| ((long long)exp << 52);
+	else if (exp + 51 >= 0)
+		ix = rshift64(mh, ml, w - 51 - exp) & 0x000fffffffffffffLL;
+	else
+		ix = 0;
+
+	ix |= (hx ^ hy) & 0x8000000000000000LL;
+	return ix;
+}
+
+/* ix - iy where iy: denormal and ix, iy >= 0 */
+static int denormal_subf1(unsigned int ix, unsigned int iy)
+{
+	int frac;
+	int exp;
+
+	if (ix < 0x00800000)
+		return ix - iy;
+
+	exp = (ix & 0x7f800000) >> 23;
+	if (exp - 1 > 31)
+		return ix;
+	iy >>= exp - 1;
+	if (iy == 0)
+		return ix;
+
+	frac = (ix & 0x007fffff) | 0x00800000;
+	frac -= iy;
+	while (frac < 0x00800000) {
+		if (--exp == 0)
+			return frac;
+		frac <<= 1;
+	}
+
+	return (exp << 23) | (frac & 0x007fffff);
+}
+
+/* ix + iy where iy: denormal and ix, iy >= 0 */
+static int denormal_addf1(unsigned int ix, unsigned int iy)
+{
+	int frac;
+	int exp;
+
+	if (ix < 0x00800000)
+		return ix + iy;
+
+	exp = (ix & 0x7f800000) >> 23;
+	if (exp - 1 > 31)
+		return ix;
+	iy >>= exp - 1;
+	if (iy == 0)
+	  return ix;
+
+	frac = (ix & 0x007fffff) | 0x00800000;
+	frac += iy;
+	if (frac >= 0x01000000) {
+		frac >>= 1;
+		++exp;
+	}
+
+	return (exp << 23) | (frac & 0x007fffff);
+}
+
+static int denormal_addf(int hx, int hy)
+{
+	unsigned int ix, iy;
+	int sign;
+
+	if ((hx ^ hy) & 0x80000000) {
+		sign = hx & 0x80000000;
+		ix = hx & 0x7fffffff;
+		iy = hy & 0x7fffffff;
+		if (iy < 0x00800000) {
+			ix = denormal_subf1(ix, iy);
+			if ((int) ix < 0) {
+				ix = -ix;
+				sign ^= 0x80000000;
+			}
+		} else {
+			ix = denormal_subf1(iy, ix);
+			sign ^= 0x80000000;
+		}
+	} else {
+		sign = hx & 0x80000000;
+		ix = hx & 0x7fffffff;
+		iy = hy & 0x7fffffff;
+		if (iy < 0x00800000)
+			ix = denormal_addf1(ix, iy);
+		else
+			ix = denormal_addf1(iy, ix);
+	}
+
+	return sign | ix;
+}
+
+/* ix - iy where iy: denormal and ix, iy >= 0 */
+static long long denormal_subd1(unsigned long long ix, unsigned long long iy)
+{
+	long long frac;
+	int exp;
+
+	if (ix < 0x0010000000000000LL)
+		return ix - iy;
+
+	exp = (ix & 0x7ff0000000000000LL) >> 52;
+	if (exp - 1 > 63)
+		return ix;
+	iy >>= exp - 1;
+	if (iy == 0)
+		return ix;
+
+	frac = (ix & 0x000fffffffffffffLL) | 0x0010000000000000LL;
+	frac -= iy;
+	while (frac < 0x0010000000000000LL) {
+		if (--exp == 0)
+			return frac;
+		frac <<= 1;
+	}
+
+	return ((long long)exp << 52) | (frac & 0x000fffffffffffffLL);
+}
+
+/* ix + iy where iy: denormal and ix, iy >= 0 */
+static long long denormal_addd1(unsigned long long ix, unsigned long long iy)
+{
+	long long frac;
+	long long exp;
+
+	if (ix < 0x0010000000000000LL)
+		return ix + iy;
+
+	exp = (ix & 0x7ff0000000000000LL) >> 52;
+	if (exp - 1 > 63)
+		return ix;
+	iy >>= exp - 1;
+	if (iy == 0)
+	  return ix;
+
+	frac = (ix & 0x000fffffffffffffLL) | 0x0010000000000000LL;
+	frac += iy;
+	if (frac >= 0x0020000000000000LL) {
+		frac >>= 1;
+		++exp;
+	}
+
+	return (exp << 52) | (frac & 0x000fffffffffffffLL);
+}
+
+static long long denormal_addd(long long hx, long long hy)
+{
+	unsigned long long ix, iy;
+	long long sign;
+
+	if ((hx ^ hy) & 0x8000000000000000LL) {
+		sign = hx & 0x8000000000000000LL;
+		ix = hx & 0x7fffffffffffffffLL;
+		iy = hy & 0x7fffffffffffffffLL;
+		if (iy < 0x0010000000000000LL) {
+			ix = denormal_subd1(ix, iy);
+			if ((int) ix < 0) {
+				ix = -ix;
+				sign ^= 0x8000000000000000LL;
+			}
+		} else {
+			ix = denormal_subd1(iy, ix);
+			sign ^= 0x8000000000000000LL;
+		}
+	} else {
+		sign = hx & 0x8000000000000000LL;
+		ix = hx & 0x7fffffffffffffffLL;
+		iy = hy & 0x7fffffffffffffffLL;
+		if (iy < 0x0010000000000000LL)
+			ix = denormal_addd1(ix, iy);
+		else
+			ix = denormal_addd1(iy, ix);
+	}
+
+	return sign | ix;
+}
+
+/**
+ *	denormal_to_double - Given denormalized float number,
+ *	                     store double float
+ *
+ *	@fpu: Pointer to sh_fpu_hard structure
+ *	@n: Index to FP register
+ */
+static void
+denormal_to_double (struct sh_fpu_hard_struct *fpu, int n)
+{
+	unsigned long du, dl;
+	unsigned long x = fpu->fpul;
+	int exp = 1023 - 126;
+
+	if (x != 0 && (x & 0x7f800000) == 0) {
+		du = (x & 0x80000000);
+		while ((x & 0x00800000) == 0) {
+			x <<= 1;
+			exp--;
+		}
+		x &= 0x007fffff;
+		du |= (exp << 20) | (x >> 3);
+		dl = x << 29;
+
+		fpu->fp_regs[n] = du;
+		fpu->fp_regs[n+1] = dl;
+	}
+}
+
+/**
+ *	ieee_fpe_handler - Handle denormalized number exception
+ *
+ *	@regs: Pointer to register structure
+ *
+ *	Returns 1 when it's handled (should not cause exception).
+ */
+static int
+ieee_fpe_handler (struct pt_regs *regs)
+{
+	unsigned short insn = *(unsigned short *) regs->pc;
+	unsigned short finsn;
+	unsigned long nextpc;
+	int nib[4] = {
+		(insn >> 12) & 0xf,
+		(insn >> 8) & 0xf,
+		(insn >> 4) & 0xf,
+		insn & 0xf};
+
+	if (nib[0] == 0xb ||
+	    (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */
+		regs->pr = regs->pc + 4;
+	if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */
+		nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3);
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */
+		if (regs->sr & 1)
+			nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
+		else
+			nextpc = regs->pc + 4;
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */
+		if (regs->sr & 1)
+			nextpc = regs->pc + 4;
+		else
+			nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (nib[0] == 0x4 && nib[3] == 0xb &&
+		 (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */
+		nextpc = regs->regs[nib[1]];
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (nib[0] == 0x0 && nib[3] == 0x3 &&
+		 (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */
+		nextpc = regs->pc + 4 + regs->regs[nib[1]];
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (insn == 0x000b) { /* rts */
+		nextpc = regs->pr;
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else {
+		nextpc = regs->pc + 2;
+		finsn = insn;
+	}
+
+#define FPSCR_FPU_ERROR (1 << 17)
+
+	if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */
+		struct task_struct *tsk = current;
+
+		if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_FPU_ERROR)) {
+			/* FPU error */
+			denormal_to_double (&tsk->thread.xstate->hardfpu,
+					    (finsn >> 8) & 0xf);
+		} else
+			return 0;
+
+		regs->pc = nextpc;
+		return 1;
+	} else if ((finsn & 0xf00f) == 0xf002) { /* fmul */
+		struct task_struct *tsk = current;
+		int fpscr;
+		int n, m, prec;
+		unsigned int hx, hy;
+
+		n = (finsn >> 8) & 0xf;
+		m = (finsn >> 4) & 0xf;
+		hx = tsk->thread.xstate->hardfpu.fp_regs[n];
+		hy = tsk->thread.xstate->hardfpu.fp_regs[m];
+		fpscr = tsk->thread.xstate->hardfpu.fpscr;
+		prec = fpscr & (1 << 19);
+
+		if ((fpscr & FPSCR_FPU_ERROR)
+		     && (prec && ((hx & 0x7fffffff) < 0x00100000
+				   || (hy & 0x7fffffff) < 0x00100000))) {
+			long long llx, lly;
+
+			/* FPU error because of denormal */
+			llx = ((long long) hx << 32)
+			       | tsk->thread.xstate->hardfpu.fp_regs[n+1];
+			lly = ((long long) hy << 32)
+			       | tsk->thread.xstate->hardfpu.fp_regs[m+1];
+			if ((hx & 0x7fffffff) >= 0x00100000)
+				llx = denormal_muld(lly, llx);
+			else
+				llx = denormal_muld(llx, lly);
+			tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
+			tsk->thread.xstate->hardfpu.fp_regs[n+1] = llx & 0xffffffff;
+		} else if ((fpscr & FPSCR_FPU_ERROR)
+		     && (!prec && ((hx & 0x7fffffff) < 0x00800000
+				   || (hy & 0x7fffffff) < 0x00800000))) {
+			/* FPU error because of denormal */
+			if ((hx & 0x7fffffff) >= 0x00800000)
+				hx = denormal_mulf(hy, hx);
+			else
+				hx = denormal_mulf(hx, hy);
+			tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
+		} else
+			return 0;
+
+		regs->pc = nextpc;
+		return 1;
+	} else if ((finsn & 0xf00e) == 0xf000) { /* fadd, fsub */
+		struct task_struct *tsk = current;
+		int fpscr;
+		int n, m, prec;
+		unsigned int hx, hy;
+
+		n = (finsn >> 8) & 0xf;
+		m = (finsn >> 4) & 0xf;
+		hx = tsk->thread.xstate->hardfpu.fp_regs[n];
+		hy = tsk->thread.xstate->hardfpu.fp_regs[m];
+		fpscr = tsk->thread.xstate->hardfpu.fpscr;
+		prec = fpscr & (1 << 19);
+
+		if ((fpscr & FPSCR_FPU_ERROR)
+		     && (prec && ((hx & 0x7fffffff) < 0x00100000
+				   || (hy & 0x7fffffff) < 0x00100000))) {
+			long long llx, lly;
+
+			/* FPU error because of denormal */
+			llx = ((long long) hx << 32)
+			       | tsk->thread.xstate->hardfpu.fp_regs[n+1];
+			lly = ((long long) hy << 32)
+			       | tsk->thread.xstate->hardfpu.fp_regs[m+1];
+			if ((finsn & 0xf00f) == 0xf000)
+				llx = denormal_addd(llx, lly);
+			else
+				llx = denormal_addd(llx, lly ^ (1LL << 63));
+			tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
+			tsk->thread.xstate->hardfpu.fp_regs[n+1] = llx & 0xffffffff;
+		} else if ((fpscr & FPSCR_FPU_ERROR)
+		     && (!prec && ((hx & 0x7fffffff) < 0x00800000
+				   || (hy & 0x7fffffff) < 0x00800000))) {
+			/* FPU error because of denormal */
+			if ((finsn & 0xf00f) == 0xf000)
+				hx = denormal_addf(hx, hy);
+			else
+				hx = denormal_addf(hx, hy ^ 0x80000000);
+			tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
+		} else
+			return 0;
+
+		regs->pc = nextpc;
+		return 1;
+	}
+
+	return 0;
+}
+
+BUILD_TRAP_HANDLER(fpu_error)
+{
+	struct task_struct *tsk = current;
+	TRAP_HANDLER_DECL;
+
+	__unlazy_fpu(tsk, regs);
+	if (ieee_fpe_handler(regs)) {
+		tsk->thread.xstate->hardfpu.fpscr &=
+			~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
+		grab_fpu(regs);
+		restore_fpu(tsk);
+		task_thread_info(tsk)->status |= TS_USEDFPU;
+		return;
+	}
+
+	force_sig(SIGFPE, tsk);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/opcode_helper.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/opcode_helper.c
new file mode 100644
index 0000000..72aa61c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/opcode_helper.c
@@ -0,0 +1,54 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/opcode_helper.c
+ *
+ * Helper for the SH-2A 32-bit opcodes.
+ *
+ *  Copyright (C) 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+
+/*
+ * Instructions on SH are generally fixed at 16-bits, however, SH-2A
+ * introduces some 32-bit instructions. Since there are no real
+ * constraints on their use (and they can be mixed and matched), we need
+ * to check the instruction encoding to work out if it's a true 32-bit
+ * instruction or not.
+ *
+ * Presently, 32-bit opcodes have only slight variations in what the
+ * actual encoding looks like in the first-half of the instruction, which
+ * makes it fairly straightforward to differentiate from the 16-bit ones.
+ *
+ * First 16-bits of encoding		Used by
+ *
+ *	0011nnnnmmmm0001	mov.b, mov.w, mov.l, fmov.d,
+ *				fmov.s, movu.b, movu.w
+ *
+ *	0011nnnn0iii1001        bclr.b, bld.b, bset.b, bst.b, band.b,
+ *				bandnot.b, bldnot.b, bor.b, bornot.b,
+ *				bxor.b
+ *
+ *	0000nnnniiii0000        movi20
+ *	0000nnnniiii0001        movi20s
+ */
+unsigned int instruction_size(unsigned int insn)
+{
+	/* Look for the common cases */
+	switch ((insn & 0xf00f)) {
+	case 0x0000:	/* movi20 */
+	case 0x0001:	/* movi20s */
+	case 0x3001:	/* 32-bit mov/fmov/movu variants */
+		return 4;
+	}
+
+	/* And the special cases.. */
+	switch ((insn & 0xf08f)) {
+	case 0x3009:	/* 32-bit b*.b bit operations */
+		return 4;
+	}
+
+	return 2;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
new file mode 100644
index 0000000..eef17dc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
@@ -0,0 +1,30 @@
+/*
+ * SH7203 Pinmux
+ *
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <cpu/pfc.h>
+
+static struct resource sh7203_pfc_resources[] = {
+	[0] = {
+		.start	= 0xfffe3800,
+		.end	= 0xfffe3a9f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return sh_pfc_register("pfc-sh7203", sh7203_pfc_resources,
+			       ARRAY_SIZE(sh7203_pfc_resources));
+}
+arch_initcall(plat_pinmux_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c
new file mode 100644
index 0000000..569decb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c
@@ -0,0 +1,30 @@
+/*
+ * SH7264 Pinmux
+ *
+ *  Copyright (C) 2012  Renesas Electronics Europe Ltd
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <cpu/pfc.h>
+
+static struct resource sh7264_pfc_resources[] = {
+	[0] = {
+		.start	= 0xfffe3800,
+		.end	= 0xfffe393f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return sh_pfc_register("pfc-sh7264", sh7264_pfc_resources,
+			       ARRAY_SIZE(sh7264_pfc_resources));
+}
+arch_initcall(plat_pinmux_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
new file mode 100644
index 0000000..4c17fb6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
@@ -0,0 +1,31 @@
+/*
+ * SH7269 Pinmux
+ *
+ * Copyright (C) 2012  Renesas Electronics Europe Ltd
+ * Copyright (C) 2012  Phil Edworthy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <cpu/pfc.h>
+
+static struct resource sh7269_pfc_resources[] = {
+	[0] = {
+		.start	= 0xfffe3800,
+		.end	= 0xfffe391f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return sh_pfc_register("pfc-sh7269", sh7269_pfc_resources,
+			       ARRAY_SIZE(sh7269_pfc_resources));
+}
+arch_initcall(plat_pinmux_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/probe.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/probe.c
new file mode 100644
index 0000000..3f87971
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/probe.c
@@ -0,0 +1,60 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/probe.c
+ *
+ * CPU Subtype Probing for SH-2A.
+ *
+ * Copyright (C) 2004 - 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+
+void cpu_probe(void)
+{
+	boot_cpu_data.family			= CPU_FAMILY_SH2A;
+
+	/* All SH-2A CPUs have support for 16 and 32-bit opcodes.. */
+	boot_cpu_data.flags			|= CPU_HAS_OP32;
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7201)
+	boot_cpu_data.type			= CPU_SH7201;
+	boot_cpu_data.flags			|= CPU_HAS_FPU;
+#elif defined(CONFIG_CPU_SUBTYPE_SH7203)
+	boot_cpu_data.type			= CPU_SH7203;
+	boot_cpu_data.flags			|= CPU_HAS_FPU;
+#elif defined(CONFIG_CPU_SUBTYPE_SH7263)
+	boot_cpu_data.type			= CPU_SH7263;
+	boot_cpu_data.flags			|= CPU_HAS_FPU;
+#elif defined(CONFIG_CPU_SUBTYPE_SH7264)
+	boot_cpu_data.type			= CPU_SH7264;
+	boot_cpu_data.flags			|= CPU_HAS_FPU;
+#elif defined(CONFIG_CPU_SUBTYPE_SH7269)
+	boot_cpu_data.type			= CPU_SH7269;
+	boot_cpu_data.flags			|= CPU_HAS_FPU;
+#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
+	boot_cpu_data.type			= CPU_SH7206;
+	boot_cpu_data.flags			|= CPU_HAS_DSP;
+#elif defined(CONFIG_CPU_SUBTYPE_MXG)
+	boot_cpu_data.type			= CPU_MXG;
+	boot_cpu_data.flags			|= CPU_HAS_DSP;
+#endif
+
+	boot_cpu_data.dcache.ways		= 4;
+	boot_cpu_data.dcache.way_incr		= (1 << 11);
+	boot_cpu_data.dcache.sets		= 128;
+	boot_cpu_data.dcache.entry_shift	= 4;
+	boot_cpu_data.dcache.linesz		= L1_CACHE_BYTES;
+	boot_cpu_data.dcache.flags		= 0;
+
+	/*
+	 * The icache is the same as the dcache as far as this setup is
+	 * concerned. The only real difference in hardware is that the icache
+	 * lacks the U bit that the dcache has, none of this has any bearing
+	 * on the cache info.
+	 */
+	boot_cpu_data.icache		= boot_cpu_data.dcache;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-mxg.c
new file mode 100644
index 0000000..060fdd3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-mxg.c
@@ -0,0 +1,177 @@
+/*
+ * Renesas MX-G (R8A03022BG) Setup
+ *
+ *  Copyright (C) 2008, 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	IRQ8, IRQ9, IRQ10, IRQ11, IRQ12, IRQ13, IRQ14, IRQ15,
+
+	PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
+	SINT8, SINT7, SINT6, SINT5, SINT4, SINT3, SINT2, SINT1,
+
+	SCIF0, SCIF1,
+
+	MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5,
+	MTU2_TGI3B, MTU2_TGI3C,
+
+	/* interrupt groups */
+	PINT,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
+	INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
+	INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
+	INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
+	INTC_IRQ(IRQ8, 72), INTC_IRQ(IRQ9, 73),
+	INTC_IRQ(IRQ10, 74), INTC_IRQ(IRQ11, 75),
+	INTC_IRQ(IRQ12, 76), INTC_IRQ(IRQ13, 77),
+	INTC_IRQ(IRQ14, 78), INTC_IRQ(IRQ15, 79),
+
+	INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
+	INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
+	INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
+	INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
+
+	INTC_IRQ(SINT8, 94), INTC_IRQ(SINT7, 95),
+	INTC_IRQ(SINT6, 96), INTC_IRQ(SINT5, 97),
+	INTC_IRQ(SINT4, 98), INTC_IRQ(SINT3, 99),
+	INTC_IRQ(SINT2, 100), INTC_IRQ(SINT1, 101),
+
+	INTC_IRQ(SCIF0, 220), INTC_IRQ(SCIF0, 221),
+	INTC_IRQ(SCIF0, 222), INTC_IRQ(SCIF0, 223),
+	INTC_IRQ(SCIF1, 224), INTC_IRQ(SCIF1, 225),
+	INTC_IRQ(SCIF1, 226), INTC_IRQ(SCIF1, 227),
+
+	INTC_IRQ(MTU2_GROUP1, 228), INTC_IRQ(MTU2_GROUP1, 229),
+	INTC_IRQ(MTU2_GROUP1, 230), INTC_IRQ(MTU2_GROUP1, 231),
+	INTC_IRQ(MTU2_GROUP1, 232), INTC_IRQ(MTU2_GROUP1, 233),
+
+	INTC_IRQ(MTU2_GROUP2, 234), INTC_IRQ(MTU2_GROUP2, 235),
+	INTC_IRQ(MTU2_GROUP2, 236), INTC_IRQ(MTU2_GROUP2, 237),
+	INTC_IRQ(MTU2_GROUP2, 238), INTC_IRQ(MTU2_GROUP2, 239),
+
+	INTC_IRQ(MTU2_GROUP3, 240), INTC_IRQ(MTU2_GROUP3, 241),
+	INTC_IRQ(MTU2_GROUP3, 242), INTC_IRQ(MTU2_GROUP3, 243),
+
+	INTC_IRQ(MTU2_TGI3B, 244),
+	INTC_IRQ(MTU2_TGI3C, 245),
+
+	INTC_IRQ(MTU2_GROUP4, 246), INTC_IRQ(MTU2_GROUP4, 247),
+	INTC_IRQ(MTU2_GROUP4, 248), INTC_IRQ(MTU2_GROUP4, 249),
+	INTC_IRQ(MTU2_GROUP4, 250), INTC_IRQ(MTU2_GROUP4, 251),
+
+	INTC_IRQ(MTU2_GROUP5, 252), INTC_IRQ(MTU2_GROUP5, 253),
+	INTC_IRQ(MTU2_GROUP5, 254), INTC_IRQ(MTU2_GROUP5, 255),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
+		   PINT4, PINT5, PINT6, PINT7),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xfffd9418, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+	{ 0xfffd941a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ 0xfffd941c, 0, 16, 4, /* IPR03 */ { IRQ8, IRQ9, IRQ10, IRQ11 } },
+	{ 0xfffd941e, 0, 16, 4, /* IPR04 */ { IRQ12, IRQ13, IRQ14, IRQ15 } },
+	{ 0xfffd9420, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
+	{ 0xfffd9800, 0, 16, 4, /* IPR06 */ { } },
+	{ 0xfffd9802, 0, 16, 4, /* IPR07 */ { } },
+	{ 0xfffd9804, 0, 16, 4, /* IPR08 */ { } },
+	{ 0xfffd9806, 0, 16, 4, /* IPR09 */ { } },
+	{ 0xfffd9808, 0, 16, 4, /* IPR10 */ { } },
+	{ 0xfffd980a, 0, 16, 4, /* IPR11 */ { } },
+	{ 0xfffd980c, 0, 16, 4, /* IPR12 */ { } },
+	{ 0xfffd980e, 0, 16, 4, /* IPR13 */ { } },
+	{ 0xfffd9810, 0, 16, 4, /* IPR14 */ { 0, 0, 0, SCIF0 } },
+	{ 0xfffd9812, 0, 16, 4, /* IPR15 */
+		{ SCIF1, MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3 } },
+	{ 0xfffd9814, 0, 16, 4, /* IPR16 */
+		{ MTU2_TGI3B, MTU2_TGI3C, MTU2_GROUP4, MTU2_GROUP5 } },
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xfffd9408, 0, 16, /* PINTER */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "mxg", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+static struct resource mtu2_resources[] = {
+	DEFINE_RES_MEM(0xff801000, 0x400),
+	DEFINE_RES_IRQ_NAMED(228, "tgi0a"),
+	DEFINE_RES_IRQ_NAMED(234, "tgi1a"),
+	DEFINE_RES_IRQ_NAMED(240, "tgi2a"),
+};
+
+static struct platform_device mtu2_device = {
+	.name		= "sh-mtu2",
+	.id		= -1,
+	.resource	= mtu2_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_resources),
+};
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xff804000, 0x100),
+	DEFINE_RES_IRQ(220),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct platform_device *mxg_devices[] __initdata = {
+	&scif0_device,
+	&mtu2_device,
+};
+
+static int __init mxg_devices_setup(void)
+{
+	return platform_add_devices(mxg_devices,
+				    ARRAY_SIZE(mxg_devices));
+}
+arch_initcall(mxg_devices_setup);
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
+
+static struct platform_device *mxg_early_devices[] __initdata = {
+	&scif0_device,
+	&mtu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(mxg_early_devices,
+				   ARRAY_SIZE(mxg_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
new file mode 100644
index 0000000..c1301f6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
@@ -0,0 +1,420 @@
+/*
+ *  SH7201 setup
+ *
+ *  Copyright (C) 2008  Peter Griffin pgriffin@mpc-data.co.uk
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
+
+	ADC_ADI,
+
+	MTU20_ABCD, MTU20_VEF, MTU21_AB, MTU21_VU, MTU22_AB, MTU22_VU,
+	MTU23_ABCD, MTU24_ABCD, MTU25_UVW, MTU2_TCI3V, MTU2_TCI4V,
+
+	RTC, WDT,
+
+	IIC30, IIC31, IIC32,
+
+	DMAC0_DMINT0, DMAC1_DMINT1,
+	DMAC2_DMINT2, DMAC3_DMINT3,
+
+	SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
+
+	DMAC0_DMINTA, DMAC4_DMINT4, DMAC5_DMINT5, DMAC6_DMINT6,
+	DMAC7_DMINT7,
+
+	RCAN0, RCAN1,
+
+	SSI0_SSII, SSI1_SSII,
+
+	TMR0, TMR1,
+
+	/* interrupt groups */
+	PINT,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
+	INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
+	INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
+	INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
+
+	INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
+	INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
+	INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
+	INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
+
+	INTC_IRQ(ADC_ADI, 92),
+
+	INTC_IRQ(MTU20_ABCD, 108), INTC_IRQ(MTU20_ABCD, 109),
+	INTC_IRQ(MTU20_ABCD, 110), INTC_IRQ(MTU20_ABCD, 111),
+
+	INTC_IRQ(MTU20_VEF, 112), INTC_IRQ(MTU20_VEF, 113),
+	INTC_IRQ(MTU20_VEF, 114),
+
+	INTC_IRQ(MTU21_AB, 116), INTC_IRQ(MTU21_AB, 117),
+	INTC_IRQ(MTU21_VU, 120), INTC_IRQ(MTU21_VU, 121),
+
+	INTC_IRQ(MTU22_AB, 124), INTC_IRQ(MTU22_AB, 125),
+	INTC_IRQ(MTU22_VU, 128), INTC_IRQ(MTU22_VU, 129),
+
+	INTC_IRQ(MTU23_ABCD, 132), INTC_IRQ(MTU23_ABCD, 133),
+	INTC_IRQ(MTU23_ABCD, 134), INTC_IRQ(MTU23_ABCD, 135),
+
+	INTC_IRQ(MTU2_TCI3V, 136),
+
+	INTC_IRQ(MTU24_ABCD, 140), INTC_IRQ(MTU24_ABCD, 141),
+	INTC_IRQ(MTU24_ABCD, 142), INTC_IRQ(MTU24_ABCD, 143),
+
+	INTC_IRQ(MTU2_TCI4V, 144),
+
+	INTC_IRQ(MTU25_UVW, 148), INTC_IRQ(MTU25_UVW, 149),
+	INTC_IRQ(MTU25_UVW, 150),
+
+	INTC_IRQ(RTC, 152), INTC_IRQ(RTC, 153),
+	INTC_IRQ(RTC, 154),
+
+	INTC_IRQ(WDT, 156),
+
+	INTC_IRQ(IIC30, 157), INTC_IRQ(IIC30, 158),
+	INTC_IRQ(IIC30, 159), INTC_IRQ(IIC30, 160),
+	INTC_IRQ(IIC30, 161),
+
+	INTC_IRQ(IIC31, 164), INTC_IRQ(IIC31, 165),
+	INTC_IRQ(IIC31, 166), INTC_IRQ(IIC31, 167),
+	INTC_IRQ(IIC31, 168),
+
+	INTC_IRQ(IIC32, 170), INTC_IRQ(IIC32, 171),
+	INTC_IRQ(IIC32, 172), INTC_IRQ(IIC32, 173),
+	INTC_IRQ(IIC32, 174),
+
+	INTC_IRQ(DMAC0_DMINT0, 176), INTC_IRQ(DMAC1_DMINT1, 177),
+	INTC_IRQ(DMAC2_DMINT2, 178), INTC_IRQ(DMAC3_DMINT3, 179),
+
+	INTC_IRQ(SCIF0, 180), INTC_IRQ(SCIF0, 181),
+	INTC_IRQ(SCIF0, 182), INTC_IRQ(SCIF0, 183),
+	INTC_IRQ(SCIF1, 184), INTC_IRQ(SCIF1, 185),
+	INTC_IRQ(SCIF1, 186), INTC_IRQ(SCIF1, 187),
+	INTC_IRQ(SCIF2, 188), INTC_IRQ(SCIF2, 189),
+	INTC_IRQ(SCIF2, 190), INTC_IRQ(SCIF2, 191),
+	INTC_IRQ(SCIF3, 192), INTC_IRQ(SCIF3, 193),
+	INTC_IRQ(SCIF3, 194), INTC_IRQ(SCIF3, 195),
+	INTC_IRQ(SCIF4, 196), INTC_IRQ(SCIF4, 197),
+	INTC_IRQ(SCIF4, 198), INTC_IRQ(SCIF4, 199),
+	INTC_IRQ(SCIF5, 200), INTC_IRQ(SCIF5, 201),
+	INTC_IRQ(SCIF5, 202), INTC_IRQ(SCIF5, 203),
+	INTC_IRQ(SCIF6, 204), INTC_IRQ(SCIF6, 205),
+	INTC_IRQ(SCIF6, 206), INTC_IRQ(SCIF6, 207),
+	INTC_IRQ(SCIF7, 208), INTC_IRQ(SCIF7, 209),
+	INTC_IRQ(SCIF7, 210), INTC_IRQ(SCIF7, 211),
+
+	INTC_IRQ(DMAC0_DMINTA, 212), INTC_IRQ(DMAC4_DMINT4, 216),
+	INTC_IRQ(DMAC5_DMINT5, 217), INTC_IRQ(DMAC6_DMINT6, 218),
+	INTC_IRQ(DMAC7_DMINT7, 219),
+
+	INTC_IRQ(RCAN0, 228), INTC_IRQ(RCAN0, 229),
+	INTC_IRQ(RCAN0, 230),
+	INTC_IRQ(RCAN0, 231), INTC_IRQ(RCAN0, 232),
+
+	INTC_IRQ(RCAN1, 234), INTC_IRQ(RCAN1, 235),
+	INTC_IRQ(RCAN1, 236),
+	INTC_IRQ(RCAN1, 237), INTC_IRQ(RCAN1, 238),
+
+	INTC_IRQ(SSI0_SSII, 244), INTC_IRQ(SSI1_SSII, 245),
+
+	INTC_IRQ(TMR0, 246), INTC_IRQ(TMR0, 247),
+	INTC_IRQ(TMR0, 248),
+
+	INTC_IRQ(TMR1, 252), INTC_IRQ(TMR1, 253),
+	INTC_IRQ(TMR1, 254),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
+		   PINT4, PINT5, PINT6, PINT7),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xfffe9418, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+	{ 0xfffe941a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ 0xfffe9420, 0, 16, 4, /* IPR05 */ { PINT, 0, ADC_ADI, 0 } },
+	{ 0xfffe9800, 0, 16, 4, /* IPR06 */ { 0, MTU20_ABCD, MTU20_VEF, MTU21_AB } },
+	{ 0xfffe9802, 0, 16, 4, /* IPR07 */ { MTU21_VU, MTU22_AB, MTU22_VU,  MTU23_ABCD } },
+	{ 0xfffe9804, 0, 16, 4, /* IPR08 */ { MTU2_TCI3V, MTU24_ABCD, MTU2_TCI4V, MTU25_UVW } },
+
+	{ 0xfffe9806, 0, 16, 4, /* IPR09 */ { RTC, WDT, IIC30, 0 } },
+	{ 0xfffe9808, 0, 16, 4, /* IPR10 */ { IIC31, IIC32, DMAC0_DMINT0, DMAC1_DMINT1 } },
+	{ 0xfffe980a, 0, 16, 4, /* IPR11 */ { DMAC2_DMINT2, DMAC3_DMINT3, SCIF0, SCIF1 } },
+	{ 0xfffe980c, 0, 16, 4, /* IPR12 */ { SCIF2, SCIF3, SCIF4, SCIF5 } },
+	{ 0xfffe980e, 0, 16, 4, /* IPR13 */ { SCIF6, SCIF7, DMAC0_DMINTA, DMAC4_DMINT4  } },
+	{ 0xfffe9810, 0, 16, 4, /* IPR14 */ { DMAC5_DMINT5, DMAC6_DMINT6, DMAC7_DMINT7, 0 } },
+	{ 0xfffe9812, 0, 16, 4, /* IPR15 */ { 0, RCAN0, RCAN1, 0 } },
+	{ 0xfffe9814, 0, 16, 4, /* IPR16 */ { SSI0_SSII, SSI1_SSII, TMR0, TMR1 } },
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xfffe9408, 0, 16, /* PINTER */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7201", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xfffe8000, 0x100),
+	DEFINE_RES_IRQ(180),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xfffe8800, 0x100),
+	DEFINE_RES_IRQ(184),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xfffe9000, 0x100),
+	DEFINE_RES_IRQ(188),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xfffe9800, 0x100),
+	DEFINE_RES_IRQ(192),
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xfffea000, 0x100),
+	DEFINE_RES_IRQ(196),
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xfffea800, 0x100),
+	DEFINE_RES_IRQ(200),
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct plat_sci_port scif6_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif6_resources[] = {
+	DEFINE_RES_MEM(0xfffeb000, 0x100),
+	DEFINE_RES_IRQ(204),
+};
+
+static struct platform_device scif6_device = {
+	.name		= "sh-sci",
+	.id		= 6,
+	.resource	= scif6_resources,
+	.num_resources	= ARRAY_SIZE(scif6_resources),
+	.dev		= {
+		.platform_data	= &scif6_platform_data,
+	},
+};
+
+static struct plat_sci_port scif7_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif7_resources[] = {
+	DEFINE_RES_MEM(0xfffeb800, 0x100),
+	DEFINE_RES_IRQ(208),
+};
+
+static struct platform_device scif7_device = {
+	.name		= "sh-sci",
+	.id		= 7,
+	.resource	= scif7_resources,
+	.num_resources	= ARRAY_SIZE(scif7_resources),
+	.dev		= {
+		.platform_data	= &scif7_platform_data,
+	},
+};
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xffff0800,
+		.end	= 0xffff2000 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Shared Period/Carry/Alarm IRQ */
+		.start	= 152,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+static struct resource mtu2_resources[] = {
+	DEFINE_RES_MEM(0xfffe4000, 0x400),
+	DEFINE_RES_IRQ_NAMED(108, "tgi0a"),
+	DEFINE_RES_IRQ_NAMED(116, "tgi1a"),
+	DEFINE_RES_IRQ_NAMED(124, "tgi1b"),
+};
+
+static struct platform_device mtu2_device = {
+	.name		= "sh-mtu2",
+	.id		= -1,
+	.resource	= mtu2_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_resources),
+};
+
+static struct platform_device *sh7201_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&scif7_device,
+	&rtc_device,
+	&mtu2_device,
+};
+
+static int __init sh7201_devices_setup(void)
+{
+	return platform_add_devices(sh7201_devices,
+				    ARRAY_SIZE(sh7201_devices));
+}
+arch_initcall(sh7201_devices_setup);
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
+
+static struct platform_device *sh7201_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&scif7_device,
+	&mtu2_device,
+};
+
+#define STBCR3 0xfffe0408
+
+void __init plat_early_device_setup(void)
+{
+	/* enable MTU2 clock */
+	__raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
+
+	early_platform_add_devices(sh7201_early_devices,
+				   ARRAY_SIZE(sh7201_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
new file mode 100644
index 0000000..32ec732
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
@@ -0,0 +1,357 @@
+/*
+ * SH7203 and SH7263 Setup
+ *
+ *  Copyright (C) 2007 - 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
+	DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
+	USB, LCDC, CMT0, CMT1, BSC, WDT,
+
+	MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
+	MTU3_ABCD, MTU4_ABCD, MTU2_TCI3V, MTU2_TCI4V,
+
+	ADC_ADI,
+
+	IIC30, IIC31, IIC32, IIC33,
+	SCIF0, SCIF1, SCIF2, SCIF3,
+
+	SSU0, SSU1,
+
+	SSI0_SSII, SSI1_SSII, SSI2_SSII, SSI3_SSII,
+
+	/* ROM-DEC, SDHI, SRC, and IEB are SH7263 specific */
+	ROMDEC, FLCTL, SDHI, RTC, RCAN0, RCAN1,
+	SRC, IEBI,
+
+	/* interrupt groups */
+	PINT,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
+	INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
+	INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
+	INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
+	INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
+	INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
+	INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
+	INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
+	INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
+	INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
+	INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
+	INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
+	INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
+	INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
+	INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
+	INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
+	INTC_IRQ(USB, 140), INTC_IRQ(LCDC, 141),
+	INTC_IRQ(CMT0, 142), INTC_IRQ(CMT1, 143),
+	INTC_IRQ(BSC, 144), INTC_IRQ(WDT, 145),
+	INTC_IRQ(MTU0_ABCD, 146), INTC_IRQ(MTU0_ABCD, 147),
+	INTC_IRQ(MTU0_ABCD, 148), INTC_IRQ(MTU0_ABCD, 149),
+	INTC_IRQ(MTU0_VEF, 150),
+	INTC_IRQ(MTU0_VEF, 151), INTC_IRQ(MTU0_VEF, 152),
+	INTC_IRQ(MTU1_AB, 153), INTC_IRQ(MTU1_AB, 154),
+	INTC_IRQ(MTU1_VU, 155), INTC_IRQ(MTU1_VU, 156),
+	INTC_IRQ(MTU2_AB, 157), INTC_IRQ(MTU2_AB, 158),
+	INTC_IRQ(MTU2_VU, 159), INTC_IRQ(MTU2_VU, 160),
+	INTC_IRQ(MTU3_ABCD, 161), INTC_IRQ(MTU3_ABCD, 162),
+	INTC_IRQ(MTU3_ABCD, 163), INTC_IRQ(MTU3_ABCD, 164),
+	INTC_IRQ(MTU2_TCI3V, 165),
+	INTC_IRQ(MTU4_ABCD, 166), INTC_IRQ(MTU4_ABCD, 167),
+	INTC_IRQ(MTU4_ABCD, 168), INTC_IRQ(MTU4_ABCD, 169),
+	INTC_IRQ(MTU2_TCI4V, 170),
+	INTC_IRQ(ADC_ADI, 171),
+	INTC_IRQ(IIC30, 172), INTC_IRQ(IIC30, 173),
+	INTC_IRQ(IIC30, 174), INTC_IRQ(IIC30, 175),
+	INTC_IRQ(IIC30, 176),
+	INTC_IRQ(IIC31, 177), INTC_IRQ(IIC31, 178),
+	INTC_IRQ(IIC31, 179), INTC_IRQ(IIC31, 180),
+	INTC_IRQ(IIC31, 181),
+	INTC_IRQ(IIC32, 182), INTC_IRQ(IIC32, 183),
+	INTC_IRQ(IIC32, 184), INTC_IRQ(IIC32, 185),
+	INTC_IRQ(IIC32, 186),
+	INTC_IRQ(IIC33, 187), INTC_IRQ(IIC33, 188),
+	INTC_IRQ(IIC33, 189), INTC_IRQ(IIC33, 190),
+	INTC_IRQ(IIC33, 191),
+	INTC_IRQ(SCIF0, 192), INTC_IRQ(SCIF0, 193),
+	INTC_IRQ(SCIF0, 194), INTC_IRQ(SCIF0, 195),
+	INTC_IRQ(SCIF1, 196), INTC_IRQ(SCIF1, 197),
+	INTC_IRQ(SCIF1, 198), INTC_IRQ(SCIF1, 199),
+	INTC_IRQ(SCIF2, 200), INTC_IRQ(SCIF2, 201),
+	INTC_IRQ(SCIF2, 202), INTC_IRQ(SCIF2, 203),
+	INTC_IRQ(SCIF3, 204), INTC_IRQ(SCIF3, 205),
+	INTC_IRQ(SCIF3, 206), INTC_IRQ(SCIF3, 207),
+	INTC_IRQ(SSU0, 208), INTC_IRQ(SSU0, 209),
+	INTC_IRQ(SSU0, 210),
+	INTC_IRQ(SSU1, 211), INTC_IRQ(SSU1, 212),
+	INTC_IRQ(SSU1, 213),
+	INTC_IRQ(SSI0_SSII, 214), INTC_IRQ(SSI1_SSII, 215),
+	INTC_IRQ(SSI2_SSII, 216), INTC_IRQ(SSI3_SSII, 217),
+	INTC_IRQ(FLCTL, 224), INTC_IRQ(FLCTL, 225),
+	INTC_IRQ(FLCTL, 226), INTC_IRQ(FLCTL, 227),
+	INTC_IRQ(RTC, 231), INTC_IRQ(RTC, 232),
+	INTC_IRQ(RTC, 233),
+	INTC_IRQ(RCAN0, 234), INTC_IRQ(RCAN0, 235),
+	INTC_IRQ(RCAN0, 236), INTC_IRQ(RCAN0, 237),
+	INTC_IRQ(RCAN0, 238),
+	INTC_IRQ(RCAN1, 239), INTC_IRQ(RCAN1, 240),
+	INTC_IRQ(RCAN1, 241), INTC_IRQ(RCAN1, 242),
+	INTC_IRQ(RCAN1, 243),
+
+	/* SH7263-specific trash */
+#ifdef CONFIG_CPU_SUBTYPE_SH7263
+	INTC_IRQ(ROMDEC, 218), INTC_IRQ(ROMDEC, 219),
+	INTC_IRQ(ROMDEC, 220), INTC_IRQ(ROMDEC, 221),
+	INTC_IRQ(ROMDEC, 222), INTC_IRQ(ROMDEC, 223),
+
+	INTC_IRQ(SDHI, 228), INTC_IRQ(SDHI, 229),
+	INTC_IRQ(SDHI, 230),
+
+	INTC_IRQ(SRC, 244), INTC_IRQ(SRC, 245),
+	INTC_IRQ(SRC, 246),
+
+	INTC_IRQ(IEBI, 247),
+#endif
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
+		   PINT4, PINT5, PINT6, PINT7),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+	{ 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
+	{ 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
+	{ 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } },
+	{ 0xfffe0c04, 0, 16, 4, /* IPR08 */ { USB, LCDC, CMT0, CMT1 } },
+	{ 0xfffe0c06, 0, 16, 4, /* IPR09 */ { BSC, WDT, MTU0_ABCD, MTU0_VEF } },
+	{ 0xfffe0c08, 0, 16, 4, /* IPR10 */ { MTU1_AB, MTU1_VU, MTU2_AB,
+					      MTU2_VU } },
+	{ 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { MTU3_ABCD, MTU2_TCI3V, MTU4_ABCD,
+					      MTU2_TCI4V } },
+	{ 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { ADC_ADI, IIC30, IIC31, IIC32 } },
+	{ 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { IIC33, SCIF0, SCIF1, SCIF2 } },
+	{ 0xfffe0c10, 0, 16, 4, /* IPR14 */ { SCIF3, SSU0, SSU1, SSI0_SSII } },
+#ifdef CONFIG_CPU_SUBTYPE_SH7203
+	{ 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSI1_SSII, SSI2_SSII,
+					      SSI3_SSII, 0 } },
+	{ 0xfffe0c14, 0, 16, 4, /* IPR16 */ { FLCTL, 0, RTC, RCAN0 } },
+	{ 0xfffe0c16, 0, 16, 4, /* IPR17 */ { RCAN1, 0, 0, 0 } },
+#else
+	{ 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSI1_SSII, SSI2_SSII,
+					      SSI3_SSII, ROMDEC } },
+	{ 0xfffe0c14, 0, 16, 4, /* IPR16 */ { FLCTL, SDHI, RTC, RCAN0 } },
+	{ 0xfffe0c16, 0, 16, 4, /* IPR17 */ { RCAN1, SRC, IEBI, 0 } },
+#endif
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xfffe0808, 0, 16, /* PINTER */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7203", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xfffe8000, 0x100),
+	DEFINE_RES_IRQ(192),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xfffe8800, 0x100),
+	DEFINE_RES_IRQ(196),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xfffe9000, 0x100),
+	DEFINE_RES_IRQ(200),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xfffe9800, 0x100),
+	DEFINE_RES_IRQ(204),
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct sh_timer_config cmt_platform_data = {
+	.channels_mask = 3,
+};
+
+static struct resource cmt_resources[] = {
+	DEFINE_RES_MEM(0xfffec000, 0x10),
+	DEFINE_RES_IRQ(142),
+	DEFINE_RES_IRQ(143),
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh-cmt-16",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
+static struct resource mtu2_resources[] = {
+	DEFINE_RES_MEM(0xfffe4000, 0x400),
+	DEFINE_RES_IRQ_NAMED(146, "tgi0a"),
+	DEFINE_RES_IRQ_NAMED(153, "tgi1a"),
+};
+
+static struct platform_device mtu2_device = {
+	.name		= "sh-mtu2",
+	.id		= -1,
+	.resource	= mtu2_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_resources),
+};
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xffff2000,
+		.end	= 0xffff2000 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Shared Period/Carry/Alarm IRQ */
+		.start	= 231,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+static struct platform_device *sh7203_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&cmt_device,
+	&mtu2_device,
+	&rtc_device,
+};
+
+static int __init sh7203_devices_setup(void)
+{
+	return platform_add_devices(sh7203_devices,
+				    ARRAY_SIZE(sh7203_devices));
+}
+arch_initcall(sh7203_devices_setup);
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
+
+static struct platform_device *sh7203_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&cmt_device,
+	&mtu2_device,
+};
+
+#define STBCR3 0xfffe0408
+#define STBCR4 0xfffe040c
+
+void __init plat_early_device_setup(void)
+{
+	/* enable CMT clock */
+	__raw_writeb(__raw_readb(STBCR4) & ~0x04, STBCR4);
+
+	/* enable MTU2 clock */
+	__raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
+
+	early_platform_add_devices(sh7203_early_devices,
+				   ARRAY_SIZE(sh7203_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
new file mode 100644
index 0000000..8d8d354
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -0,0 +1,293 @@
+/*
+ * SH7206 Setup
+ *
+ *  Copyright (C) 2006  Yoshinori Sato
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
+	ADC_ADI0, ADC_ADI1,
+
+	DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
+
+	MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
+	MTU3_ABCD, MTU4_ABCD, MTU5, POE2_12, MTU3S_ABCD, MTU4S_ABCD, MTU5S,
+	IIC3,
+
+	CMT0, CMT1, BSC, WDT,
+
+	MTU2_TCI3V, MTU2_TCI4V, MTU2S_TCI3V, MTU2S_TCI4V,
+
+	POE2_OEI3,
+
+	SCIF0, SCIF1, SCIF2, SCIF3,
+
+	/* interrupt groups */
+	PINT,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
+	INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
+	INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
+	INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
+	INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
+	INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
+	INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
+	INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
+	INTC_IRQ(ADC_ADI0, 92), INTC_IRQ(ADC_ADI1, 96),
+	INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
+	INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
+	INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
+	INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
+	INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
+	INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
+	INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
+	INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
+	INTC_IRQ(CMT0, 140), INTC_IRQ(CMT1, 144),
+	INTC_IRQ(BSC, 148), INTC_IRQ(WDT, 152),
+	INTC_IRQ(MTU0_ABCD, 156), INTC_IRQ(MTU0_ABCD, 157),
+	INTC_IRQ(MTU0_ABCD, 158), INTC_IRQ(MTU0_ABCD, 159),
+	INTC_IRQ(MTU0_VEF, 160), INTC_IRQ(MTU0_VEF, 161),
+	INTC_IRQ(MTU0_VEF, 162),
+	INTC_IRQ(MTU1_AB, 164), INTC_IRQ(MTU1_AB, 165),
+	INTC_IRQ(MTU1_VU, 168), INTC_IRQ(MTU1_VU, 169),
+	INTC_IRQ(MTU2_AB, 172), INTC_IRQ(MTU2_AB, 173),
+	INTC_IRQ(MTU2_VU, 176), INTC_IRQ(MTU2_VU, 177),
+	INTC_IRQ(MTU3_ABCD, 180), INTC_IRQ(MTU3_ABCD, 181),
+	INTC_IRQ(MTU3_ABCD, 182), INTC_IRQ(MTU3_ABCD, 183),
+	INTC_IRQ(MTU2_TCI3V, 184),
+	INTC_IRQ(MTU4_ABCD, 188), INTC_IRQ(MTU4_ABCD, 189),
+	INTC_IRQ(MTU4_ABCD, 190), INTC_IRQ(MTU4_ABCD, 191),
+	INTC_IRQ(MTU2_TCI4V, 192),
+	INTC_IRQ(MTU5, 196), INTC_IRQ(MTU5, 197),
+	INTC_IRQ(MTU5, 198),
+	INTC_IRQ(POE2_12, 200), INTC_IRQ(POE2_12, 201),
+	INTC_IRQ(MTU3S_ABCD, 204), INTC_IRQ(MTU3S_ABCD, 205),
+	INTC_IRQ(MTU3S_ABCD, 206), INTC_IRQ(MTU3S_ABCD, 207),
+	INTC_IRQ(MTU2S_TCI3V, 208),
+	INTC_IRQ(MTU4S_ABCD, 212), INTC_IRQ(MTU4S_ABCD, 213),
+	INTC_IRQ(MTU4S_ABCD, 214), INTC_IRQ(MTU4S_ABCD, 215),
+	INTC_IRQ(MTU2S_TCI4V, 216),
+	INTC_IRQ(MTU5S, 220), INTC_IRQ(MTU5S, 221),
+	INTC_IRQ(MTU5S, 222),
+	INTC_IRQ(POE2_OEI3, 224),
+	INTC_IRQ(IIC3, 228), INTC_IRQ(IIC3, 229),
+	INTC_IRQ(IIC3, 230), INTC_IRQ(IIC3, 231),
+	INTC_IRQ(IIC3, 232),
+	INTC_IRQ(SCIF0, 240), INTC_IRQ(SCIF0, 241),
+	INTC_IRQ(SCIF0, 242), INTC_IRQ(SCIF0, 243),
+	INTC_IRQ(SCIF1, 244), INTC_IRQ(SCIF1, 245),
+	INTC_IRQ(SCIF1, 246), INTC_IRQ(SCIF1, 247),
+	INTC_IRQ(SCIF2, 248), INTC_IRQ(SCIF2, 249),
+	INTC_IRQ(SCIF2, 250), INTC_IRQ(SCIF2, 251),
+	INTC_IRQ(SCIF3, 252), INTC_IRQ(SCIF3, 253),
+	INTC_IRQ(SCIF3, 254), INTC_IRQ(SCIF3, 255),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
+		   PINT4, PINT5, PINT6, PINT7),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+	{ 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, ADC_ADI0, ADC_ADI1 } },
+	{ 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
+	{ 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } },
+	{ 0xfffe0c04, 0, 16, 4, /* IPR08 */ { CMT0, CMT1, BSC, WDT } },
+	{ 0xfffe0c06, 0, 16, 4, /* IPR09 */ { MTU0_ABCD, MTU0_VEF,
+					      MTU1_AB, MTU1_VU } },
+	{ 0xfffe0c08, 0, 16, 4, /* IPR10 */ { MTU2_AB, MTU2_VU,
+					      MTU3_ABCD, MTU2_TCI3V } },
+	{ 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { MTU4_ABCD, MTU2_TCI4V,
+					      MTU5, POE2_12 } },
+	{ 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { MTU3S_ABCD, MTU2S_TCI3V,
+					      MTU4S_ABCD, MTU2S_TCI4V } },
+	{ 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { MTU5S, POE2_OEI3, IIC3, 0 } },
+	{ 0xfffe0c10, 0, 16, 4, /* IPR14 */ { SCIF0, SCIF1, SCIF2, SCIF3 } },
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xfffe0808, 0, 16, /* PINTER */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7206", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xfffe8000, 0x100),
+	DEFINE_RES_IRQ(240),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xfffe8800, 0x100),
+	DEFINE_RES_IRQ(244),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xfffe9000, 0x100),
+	DEFINE_RES_IRQ(248),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xfffe9800, 0x100),
+	DEFINE_RES_IRQ(252),
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct sh_timer_config cmt_platform_data = {
+	.channels_mask = 3,
+};
+
+static struct resource cmt_resources[] = {
+	DEFINE_RES_MEM(0xfffec000, 0x10),
+	DEFINE_RES_IRQ(140),
+	DEFINE_RES_IRQ(144),
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh-cmt-16",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
+static struct resource mtu2_resources[] = {
+	DEFINE_RES_MEM(0xfffe4000, 0x400),
+	DEFINE_RES_IRQ_NAMED(156, "tgi0a"),
+	DEFINE_RES_IRQ_NAMED(164, "tgi1a"),
+	DEFINE_RES_IRQ_NAMED(180, "tgi2a"),
+};
+
+static struct platform_device mtu2_device = {
+	.name		= "sh-mtu2s",
+	.id		= -1,
+	.resource	= mtu2_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_resources),
+};
+
+static struct platform_device *sh7206_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&cmt_device,
+	&mtu2_device,
+};
+
+static int __init sh7206_devices_setup(void)
+{
+	return platform_add_devices(sh7206_devices,
+				    ARRAY_SIZE(sh7206_devices));
+}
+arch_initcall(sh7206_devices_setup);
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
+
+static struct platform_device *sh7206_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&cmt_device,
+	&mtu2_device,
+};
+
+#define STBCR3 0xfffe0408
+#define STBCR4 0xfffe040c
+
+void __init plat_early_device_setup(void)
+{
+	/* enable CMT clock */
+	__raw_writeb(__raw_readb(STBCR4) & ~0x04, STBCR4);
+
+	/* enable MTU2 clock */
+	__raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
+
+	early_platform_add_devices(sh7206_early_devices,
+				   ARRAY_SIZE(sh7206_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-sh7264.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-sh7264.c
new file mode 100644
index 0000000..ab71eab
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-sh7264.c
@@ -0,0 +1,554 @@
+/*
+ * SH7264 Setup
+ *
+ * Copyright (C) 2012  Renesas Electronics Europe Ltd
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
+
+	DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
+	DMAC8, DMAC9, DMAC10, DMAC11, DMAC12, DMAC13, DMAC14, DMAC15,
+	USB, VDC3, CMT0, CMT1, BSC, WDT,
+	MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
+	MTU3_ABCD, MTU3_TCI3V, MTU4_ABCD, MTU4_TCI4V,
+	PWMT1, PWMT2, ADC_ADI,
+	SSIF0, SSII1, SSII2, SSII3,
+	RSPDIF,
+	IIC30, IIC31, IIC32, IIC33,
+	SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
+	SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
+	SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
+	SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
+	SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI,
+	SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI,
+	SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI,
+	SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI,
+	SIO_FIFO, RSPIC0, RSPIC1,
+	RCAN0, RCAN1, IEBC, CD_ROMD,
+	NFMC, SDHI, RTC,
+	SRCC0, SRCC1, DCOMU, OFFI, IFEI,
+
+	/* interrupt groups */
+	PINT, SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
+	INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
+	INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
+	INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
+
+	INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
+	INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
+	INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
+	INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
+
+	INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
+	INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
+	INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
+	INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
+	INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
+	INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
+	INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
+	INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
+	INTC_IRQ(DMAC8, 140), INTC_IRQ(DMAC8, 141),
+	INTC_IRQ(DMAC9, 144), INTC_IRQ(DMAC9, 145),
+	INTC_IRQ(DMAC10, 148), INTC_IRQ(DMAC10, 149),
+	INTC_IRQ(DMAC11, 152), INTC_IRQ(DMAC11, 153),
+	INTC_IRQ(DMAC12, 156), INTC_IRQ(DMAC12, 157),
+	INTC_IRQ(DMAC13, 160), INTC_IRQ(DMAC13, 161),
+	INTC_IRQ(DMAC14, 164), INTC_IRQ(DMAC14, 165),
+	INTC_IRQ(DMAC15, 168), INTC_IRQ(DMAC15, 169),
+
+	INTC_IRQ(USB, 170),
+	INTC_IRQ(VDC3, 171), INTC_IRQ(VDC3, 172),
+	INTC_IRQ(VDC3, 173), INTC_IRQ(VDC3, 174),
+	INTC_IRQ(CMT0, 175), INTC_IRQ(CMT1, 176),
+	INTC_IRQ(BSC, 177), INTC_IRQ(WDT, 178),
+
+	INTC_IRQ(MTU0_ABCD, 179), INTC_IRQ(MTU0_ABCD, 180),
+	INTC_IRQ(MTU0_ABCD, 181), INTC_IRQ(MTU0_ABCD, 182),
+	INTC_IRQ(MTU0_VEF, 183),
+	INTC_IRQ(MTU0_VEF, 184), INTC_IRQ(MTU0_VEF, 185),
+	INTC_IRQ(MTU1_AB, 186), INTC_IRQ(MTU1_AB, 187),
+	INTC_IRQ(MTU1_VU, 188), INTC_IRQ(MTU1_VU, 189),
+	INTC_IRQ(MTU2_AB, 190), INTC_IRQ(MTU2_AB, 191),
+	INTC_IRQ(MTU2_VU, 192), INTC_IRQ(MTU2_VU, 193),
+	INTC_IRQ(MTU3_ABCD, 194), INTC_IRQ(MTU3_ABCD, 195),
+	INTC_IRQ(MTU3_ABCD, 196), INTC_IRQ(MTU3_ABCD, 197),
+	INTC_IRQ(MTU3_TCI3V, 198),
+	INTC_IRQ(MTU4_ABCD, 199), INTC_IRQ(MTU4_ABCD, 200),
+	INTC_IRQ(MTU4_ABCD, 201), INTC_IRQ(MTU4_ABCD, 202),
+	INTC_IRQ(MTU4_TCI4V, 203),
+
+	INTC_IRQ(PWMT1, 204), INTC_IRQ(PWMT2, 205),
+
+	INTC_IRQ(ADC_ADI, 206),
+
+	INTC_IRQ(SSIF0, 207), INTC_IRQ(SSIF0, 208),
+	INTC_IRQ(SSIF0, 209),
+	INTC_IRQ(SSII1, 210), INTC_IRQ(SSII1, 211),
+	INTC_IRQ(SSII2, 212), INTC_IRQ(SSII2, 213),
+	INTC_IRQ(SSII3, 214), INTC_IRQ(SSII3, 215),
+
+	INTC_IRQ(RSPDIF, 216),
+
+	INTC_IRQ(IIC30, 217), INTC_IRQ(IIC30, 218),
+	INTC_IRQ(IIC30, 219), INTC_IRQ(IIC30, 220),
+	INTC_IRQ(IIC30, 221),
+	INTC_IRQ(IIC31, 222), INTC_IRQ(IIC31, 223),
+	INTC_IRQ(IIC31, 224), INTC_IRQ(IIC31, 225),
+	INTC_IRQ(IIC31, 226),
+	INTC_IRQ(IIC32, 227), INTC_IRQ(IIC32, 228),
+	INTC_IRQ(IIC32, 229), INTC_IRQ(IIC32, 230),
+	INTC_IRQ(IIC32, 231),
+
+	INTC_IRQ(SCIF0_BRI, 232), INTC_IRQ(SCIF0_ERI, 233),
+	INTC_IRQ(SCIF0_RXI, 234), INTC_IRQ(SCIF0_TXI, 235),
+	INTC_IRQ(SCIF1_BRI, 236), INTC_IRQ(SCIF1_ERI, 237),
+	INTC_IRQ(SCIF1_RXI, 238), INTC_IRQ(SCIF1_TXI, 239),
+	INTC_IRQ(SCIF2_BRI, 240), INTC_IRQ(SCIF2_ERI, 241),
+	INTC_IRQ(SCIF2_RXI, 242), INTC_IRQ(SCIF2_TXI, 243),
+	INTC_IRQ(SCIF3_BRI, 244), INTC_IRQ(SCIF3_ERI, 245),
+	INTC_IRQ(SCIF3_RXI, 246), INTC_IRQ(SCIF3_TXI, 247),
+	INTC_IRQ(SCIF4_BRI, 248), INTC_IRQ(SCIF4_ERI, 249),
+	INTC_IRQ(SCIF4_RXI, 250), INTC_IRQ(SCIF4_TXI, 251),
+	INTC_IRQ(SCIF5_BRI, 252), INTC_IRQ(SCIF5_ERI, 253),
+	INTC_IRQ(SCIF5_RXI, 254), INTC_IRQ(SCIF5_TXI, 255),
+	INTC_IRQ(SCIF6_BRI, 256), INTC_IRQ(SCIF6_ERI, 257),
+	INTC_IRQ(SCIF6_RXI, 258), INTC_IRQ(SCIF6_TXI, 259),
+	INTC_IRQ(SCIF7_BRI, 260), INTC_IRQ(SCIF7_ERI, 261),
+	INTC_IRQ(SCIF7_RXI, 262), INTC_IRQ(SCIF7_TXI, 263),
+
+	INTC_IRQ(SIO_FIFO, 264),
+
+	INTC_IRQ(RSPIC0, 265), INTC_IRQ(RSPIC0, 266),
+	INTC_IRQ(RSPIC0, 267),
+	INTC_IRQ(RSPIC1, 268), INTC_IRQ(RSPIC1, 269),
+	INTC_IRQ(RSPIC1, 270),
+
+	INTC_IRQ(RCAN0, 271), INTC_IRQ(RCAN0, 272),
+	INTC_IRQ(RCAN0, 273), INTC_IRQ(RCAN0, 274),
+	INTC_IRQ(RCAN0, 275),
+	INTC_IRQ(RCAN1, 276), INTC_IRQ(RCAN1, 277),
+	INTC_IRQ(RCAN1, 278), INTC_IRQ(RCAN1, 279),
+	INTC_IRQ(RCAN1, 280),
+
+	INTC_IRQ(IEBC, 281),
+
+	INTC_IRQ(CD_ROMD, 282), INTC_IRQ(CD_ROMD, 283),
+	INTC_IRQ(CD_ROMD, 284), INTC_IRQ(CD_ROMD, 285),
+	INTC_IRQ(CD_ROMD, 286), INTC_IRQ(CD_ROMD, 287),
+
+	INTC_IRQ(NFMC, 288), INTC_IRQ(NFMC, 289),
+	INTC_IRQ(NFMC, 290), INTC_IRQ(NFMC, 291),
+
+	INTC_IRQ(SDHI, 292), INTC_IRQ(SDHI, 293),
+	INTC_IRQ(SDHI, 294),
+
+	INTC_IRQ(RTC, 296), INTC_IRQ(RTC, 297),
+	INTC_IRQ(RTC, 298),
+
+	INTC_IRQ(SRCC0, 299), INTC_IRQ(SRCC0, 300),
+	INTC_IRQ(SRCC0, 301), INTC_IRQ(SRCC0, 302),
+	INTC_IRQ(SRCC0, 303),
+	INTC_IRQ(SRCC1, 304), INTC_IRQ(SRCC1, 305),
+	INTC_IRQ(SRCC1, 306), INTC_IRQ(SRCC1, 307),
+	INTC_IRQ(SRCC1, 308),
+
+	INTC_IRQ(DCOMU, 310), INTC_IRQ(DCOMU, 311),
+	INTC_IRQ(DCOMU, 312),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
+		   PINT4, PINT5, PINT6, PINT7),
+	INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
+	INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
+	INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
+	INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
+	INTC_GROUP(SCIF4, SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI),
+	INTC_GROUP(SCIF5, SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI),
+	INTC_GROUP(SCIF6, SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI),
+	INTC_GROUP(SCIF7, SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+	{ 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
+	{ 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0,  DMAC1,  DMAC2,  DMAC3 } },
+	{ 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4,  DMAC5,  DMAC6,  DMAC7 } },
+	{ 0xfffe0c04, 0, 16, 4, /* IPR08 */ { DMAC8,  DMAC9,
+					      DMAC10, DMAC11 } },
+	{ 0xfffe0c06, 0, 16, 4, /* IPR09 */ { DMAC12, DMAC13,
+					      DMAC14, DMAC15 } },
+	{ 0xfffe0c08, 0, 16, 4, /* IPR10 */ { USB, VDC3, CMT0, CMT1 } },
+	{ 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { BSC, WDT, MTU0_ABCD, MTU0_VEF } },
+	{ 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { MTU1_AB, MTU1_VU,
+					      MTU2_AB, MTU2_VU } },
+	{ 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { MTU3_ABCD, MTU3_TCI3V,
+					      MTU4_ABCD, MTU4_TCI4V } },
+	{ 0xfffe0c10, 0, 16, 4, /* IPR14 */ { PWMT1, PWMT2, ADC_ADI, 0 } },
+	{ 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSIF0, SSII1, SSII2, SSII3 } },
+	{ 0xfffe0c14, 0, 16, 4, /* IPR16 */ { RSPDIF, IIC30, IIC31, IIC32 } },
+	{ 0xfffe0c16, 0, 16, 4, /* IPR17 */ { SCIF0, SCIF1, SCIF2, SCIF3 } },
+	{ 0xfffe0c18, 0, 16, 4, /* IPR18 */ { SCIF4, SCIF5, SCIF6, SCIF7 } },
+	{ 0xfffe0c1a, 0, 16, 4, /* IPR19 */ { SIO_FIFO, 0, RSPIC0, RSPIC1, } },
+	{ 0xfffe0c1c, 0, 16, 4, /* IPR20 */ { RCAN0, RCAN1, IEBC, CD_ROMD } },
+	{ 0xfffe0c1e, 0, 16, 4, /* IPR21 */ { NFMC, SDHI, RTC, 0 } },
+	{ 0xfffe0c20, 0, 16, 4, /* IPR22 */ { SRCC0, SRCC1, 0, DCOMU } },
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xfffe0808, 0, 16, /* PINTER */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7264", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xfffe8000, 0x100),
+	DEFINE_RES_IRQ(233),
+	DEFINE_RES_IRQ(234),
+	DEFINE_RES_IRQ(235),
+	DEFINE_RES_IRQ(232),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xfffe8800, 0x100),
+	DEFINE_RES_IRQ(237),
+	DEFINE_RES_IRQ(238),
+	DEFINE_RES_IRQ(239),
+	DEFINE_RES_IRQ(236),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xfffe9000, 0x100),
+	DEFINE_RES_IRQ(241),
+	DEFINE_RES_IRQ(242),
+	DEFINE_RES_IRQ(243),
+	DEFINE_RES_IRQ(240),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xfffe9800, 0x100),
+	DEFINE_RES_IRQ(245),
+	DEFINE_RES_IRQ(246),
+	DEFINE_RES_IRQ(247),
+	DEFINE_RES_IRQ(244),
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xfffea000, 0x100),
+	DEFINE_RES_IRQ(249),
+	DEFINE_RES_IRQ(250),
+	DEFINE_RES_IRQ(251),
+	DEFINE_RES_IRQ(248),
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xfffea800, 0x100),
+	DEFINE_RES_IRQ(253),
+	DEFINE_RES_IRQ(254),
+	DEFINE_RES_IRQ(255),
+	DEFINE_RES_IRQ(252),
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct plat_sci_port scif6_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif6_resources[] = {
+	DEFINE_RES_MEM(0xfffeb000, 0x100),
+	DEFINE_RES_IRQ(257),
+	DEFINE_RES_IRQ(258),
+	DEFINE_RES_IRQ(259),
+	DEFINE_RES_IRQ(256),
+};
+
+static struct platform_device scif6_device = {
+	.name		= "sh-sci",
+	.id		= 6,
+	.resource	= scif6_resources,
+	.num_resources	= ARRAY_SIZE(scif6_resources),
+	.dev		= {
+		.platform_data	= &scif6_platform_data,
+	},
+};
+
+static struct plat_sci_port scif7_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif7_resources[] = {
+	DEFINE_RES_MEM(0xfffeb800, 0x100),
+	DEFINE_RES_IRQ(261),
+	DEFINE_RES_IRQ(262),
+	DEFINE_RES_IRQ(263),
+	DEFINE_RES_IRQ(260),
+};
+
+static struct platform_device scif7_device = {
+	.name		= "sh-sci",
+	.id		= 7,
+	.resource	= scif7_resources,
+	.num_resources	= ARRAY_SIZE(scif7_resources),
+	.dev		= {
+		.platform_data	= &scif7_platform_data,
+	},
+};
+
+static struct sh_timer_config cmt_platform_data = {
+	.channels_mask = 3,
+};
+
+static struct resource cmt_resources[] = {
+	DEFINE_RES_MEM(0xfffec000, 0x10),
+	DEFINE_RES_IRQ(175),
+	DEFINE_RES_IRQ(176),
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh-cmt-16",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
+static struct resource mtu2_resources[] = {
+	DEFINE_RES_MEM(0xfffe4000, 0x400),
+	DEFINE_RES_IRQ_NAMED(179, "tgi0a"),
+	DEFINE_RES_IRQ_NAMED(186, "tgi1a"),
+};
+
+static struct platform_device mtu2_device = {
+	.name		= "sh-mtu2",
+	.id		= -1,
+	.resource	= mtu2_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_resources),
+};
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xfffe6000,
+		.end	= 0xfffe6000 + 0x30 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Shared Period/Carry/Alarm IRQ */
+		.start	= 296,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+/* USB Host */
+static void usb_port_power(int port, int power)
+{
+	__raw_writew(0x200 , 0xffffc0c2) ; /* Initialise UACS25 */
+}
+
+static struct r8a66597_platdata r8a66597_data = {
+	.on_chip = 1,
+	.endian = 1,
+	.port_power = usb_port_power,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.start	= 0xffffc000,
+		.end	= 0xffffc0e4,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 170,
+		.end	= 170,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct platform_device *sh7264_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&scif7_device,
+	&cmt_device,
+	&mtu2_device,
+	&rtc_device,
+	&r8a66597_usb_host_device,
+};
+
+static int __init sh7264_devices_setup(void)
+{
+	return platform_add_devices(sh7264_devices,
+				    ARRAY_SIZE(sh7264_devices));
+}
+arch_initcall(sh7264_devices_setup);
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
+
+static struct platform_device *sh7264_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&scif7_device,
+	&cmt_device,
+	&mtu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7264_early_devices,
+				   ARRAY_SIZE(sh7264_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-sh7269.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-sh7269.c
new file mode 100644
index 0000000..c7e81b2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh2a/setup-sh7269.c
@@ -0,0 +1,570 @@
+/*
+ * SH7269 Setup
+ *
+ * Copyright (C) 2012  Renesas Electronics Europe Ltd
+ * Copyright (C) 2012  Phil Edworthy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
+
+	DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
+	DMAC8, DMAC9, DMAC10, DMAC11, DMAC12, DMAC13, DMAC14, DMAC15,
+	USB, VDC4, CMT0, CMT1, BSC, WDT,
+	MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
+	MTU3_ABCD, MTU3_TCI3V, MTU4_ABCD, MTU4_TCI4V,
+	PWMT1, PWMT2, ADC_ADI,
+	SSIF0, SSII1, SSII2, SSII3, SSII4, SSII5,
+	RSPDIF,
+	IIC30, IIC31, IIC32, IIC33,
+	SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
+	SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
+	SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
+	SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
+	SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI,
+	SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI,
+	SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI,
+	SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI,
+	RCAN0, RCAN1, RCAN2,
+	RSPIC0, RSPIC1,
+	IEBC, CD_ROMD,
+	NFMC,
+	SDHI0, SDHI1,
+	RTC,
+	SRCC0, SRCC1, SRCC2,
+
+	/* interrupt groups */
+	PINT, SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
+	INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
+	INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
+	INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
+
+	INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
+	INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
+	INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
+	INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
+
+	INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
+	INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
+	INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
+	INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
+	INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
+	INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
+	INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
+	INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
+	INTC_IRQ(DMAC8, 140), INTC_IRQ(DMAC8, 141),
+	INTC_IRQ(DMAC9, 144), INTC_IRQ(DMAC9, 145),
+	INTC_IRQ(DMAC10, 148), INTC_IRQ(DMAC10, 149),
+	INTC_IRQ(DMAC11, 152), INTC_IRQ(DMAC11, 153),
+	INTC_IRQ(DMAC12, 156), INTC_IRQ(DMAC12, 157),
+	INTC_IRQ(DMAC13, 160), INTC_IRQ(DMAC13, 161),
+	INTC_IRQ(DMAC14, 164), INTC_IRQ(DMAC14, 165),
+	INTC_IRQ(DMAC15, 168), INTC_IRQ(DMAC15, 169),
+
+	INTC_IRQ(USB, 170),
+
+	INTC_IRQ(VDC4, 171), INTC_IRQ(VDC4, 172),
+	INTC_IRQ(VDC4, 173), INTC_IRQ(VDC4, 174),
+	INTC_IRQ(VDC4, 175), INTC_IRQ(VDC4, 176),
+	INTC_IRQ(VDC4, 177), INTC_IRQ(VDC4, 177),
+
+	INTC_IRQ(CMT0, 188), INTC_IRQ(CMT1, 189),
+
+	INTC_IRQ(BSC, 190), INTC_IRQ(WDT, 191),
+
+	INTC_IRQ(MTU0_ABCD, 192), INTC_IRQ(MTU0_ABCD, 193),
+	INTC_IRQ(MTU0_ABCD, 194), INTC_IRQ(MTU0_ABCD, 195),
+	INTC_IRQ(MTU0_VEF, 196), INTC_IRQ(MTU0_VEF, 197),
+	INTC_IRQ(MTU0_VEF, 198),
+	INTC_IRQ(MTU1_AB, 199), INTC_IRQ(MTU1_AB, 200),
+	INTC_IRQ(MTU1_VU, 201), INTC_IRQ(MTU1_VU, 202),
+	INTC_IRQ(MTU2_AB, 203), INTC_IRQ(MTU2_AB, 204),
+	INTC_IRQ(MTU2_VU, 205), INTC_IRQ(MTU2_VU, 206),
+	INTC_IRQ(MTU3_ABCD, 207), INTC_IRQ(MTU3_ABCD, 208),
+	INTC_IRQ(MTU3_ABCD, 209), INTC_IRQ(MTU3_ABCD, 210),
+	INTC_IRQ(MTU3_TCI3V, 211),
+	INTC_IRQ(MTU4_ABCD, 212), INTC_IRQ(MTU4_ABCD, 213),
+	INTC_IRQ(MTU4_ABCD, 214), INTC_IRQ(MTU4_ABCD, 215),
+	INTC_IRQ(MTU4_TCI4V, 216),
+
+	INTC_IRQ(PWMT1, 217), INTC_IRQ(PWMT2, 218),
+
+	INTC_IRQ(ADC_ADI, 223),
+
+	INTC_IRQ(SSIF0, 224), INTC_IRQ(SSIF0, 225),
+	INTC_IRQ(SSIF0, 226),
+	INTC_IRQ(SSII1, 227), INTC_IRQ(SSII1, 228),
+	INTC_IRQ(SSII2, 229), INTC_IRQ(SSII2, 230),
+	INTC_IRQ(SSII3, 231), INTC_IRQ(SSII3, 232),
+	INTC_IRQ(SSII4, 233), INTC_IRQ(SSII4, 234),
+	INTC_IRQ(SSII5, 235), INTC_IRQ(SSII5, 236),
+
+	INTC_IRQ(RSPDIF, 237),
+
+	INTC_IRQ(IIC30, 238), INTC_IRQ(IIC30, 239),
+	INTC_IRQ(IIC30, 240), INTC_IRQ(IIC30, 241),
+	INTC_IRQ(IIC30, 242),
+	INTC_IRQ(IIC31, 243), INTC_IRQ(IIC31, 244),
+	INTC_IRQ(IIC31, 245), INTC_IRQ(IIC31, 246),
+	INTC_IRQ(IIC31, 247),
+	INTC_IRQ(IIC32, 248), INTC_IRQ(IIC32, 249),
+	INTC_IRQ(IIC32, 250), INTC_IRQ(IIC32, 251),
+	INTC_IRQ(IIC32, 252),
+	INTC_IRQ(IIC33, 253), INTC_IRQ(IIC33, 254),
+	INTC_IRQ(IIC33, 255), INTC_IRQ(IIC33, 256),
+	INTC_IRQ(IIC33, 257),
+
+	INTC_IRQ(SCIF0_BRI, 258), INTC_IRQ(SCIF0_ERI, 259),
+	INTC_IRQ(SCIF0_RXI, 260), INTC_IRQ(SCIF0_TXI, 261),
+	INTC_IRQ(SCIF1_BRI, 262), INTC_IRQ(SCIF1_ERI, 263),
+	INTC_IRQ(SCIF1_RXI, 264), INTC_IRQ(SCIF1_TXI, 265),
+	INTC_IRQ(SCIF2_BRI, 266), INTC_IRQ(SCIF2_ERI, 267),
+	INTC_IRQ(SCIF2_RXI, 268), INTC_IRQ(SCIF2_TXI, 269),
+	INTC_IRQ(SCIF3_BRI, 270), INTC_IRQ(SCIF3_ERI, 271),
+	INTC_IRQ(SCIF3_RXI, 272), INTC_IRQ(SCIF3_TXI, 273),
+	INTC_IRQ(SCIF4_BRI, 274), INTC_IRQ(SCIF4_ERI, 275),
+	INTC_IRQ(SCIF4_RXI, 276), INTC_IRQ(SCIF4_TXI, 277),
+	INTC_IRQ(SCIF5_BRI, 278), INTC_IRQ(SCIF5_ERI, 279),
+	INTC_IRQ(SCIF5_RXI, 280), INTC_IRQ(SCIF5_TXI, 281),
+	INTC_IRQ(SCIF6_BRI, 282), INTC_IRQ(SCIF6_ERI, 283),
+	INTC_IRQ(SCIF6_RXI, 284), INTC_IRQ(SCIF6_TXI, 285),
+	INTC_IRQ(SCIF7_BRI, 286), INTC_IRQ(SCIF7_ERI, 287),
+	INTC_IRQ(SCIF7_RXI, 288), INTC_IRQ(SCIF7_TXI, 289),
+
+	INTC_IRQ(RCAN0, 291), INTC_IRQ(RCAN0, 292),
+	INTC_IRQ(RCAN0, 293), INTC_IRQ(RCAN0, 294),
+	INTC_IRQ(RCAN0, 295),
+	INTC_IRQ(RCAN1, 296), INTC_IRQ(RCAN1, 297),
+	INTC_IRQ(RCAN1, 298), INTC_IRQ(RCAN1, 299),
+	INTC_IRQ(RCAN1, 300),
+	INTC_IRQ(RCAN2, 301), INTC_IRQ(RCAN2, 302),
+	INTC_IRQ(RCAN2, 303), INTC_IRQ(RCAN2, 304),
+	INTC_IRQ(RCAN2, 305),
+
+	INTC_IRQ(RSPIC0, 306), INTC_IRQ(RSPIC0, 307),
+	INTC_IRQ(RSPIC0, 308),
+	INTC_IRQ(RSPIC1, 309), INTC_IRQ(RSPIC1, 310),
+	INTC_IRQ(RSPIC1, 311),
+
+	INTC_IRQ(IEBC, 318),
+
+	INTC_IRQ(CD_ROMD, 319), INTC_IRQ(CD_ROMD, 320),
+	INTC_IRQ(CD_ROMD, 321), INTC_IRQ(CD_ROMD, 322),
+	INTC_IRQ(CD_ROMD, 323), INTC_IRQ(CD_ROMD, 324),
+
+	INTC_IRQ(NFMC, 325), INTC_IRQ(NFMC, 326),
+	INTC_IRQ(NFMC, 327), INTC_IRQ(NFMC, 328),
+
+	INTC_IRQ(SDHI0, 332), INTC_IRQ(SDHI0, 333),
+	INTC_IRQ(SDHI0, 334),
+	INTC_IRQ(SDHI1, 335), INTC_IRQ(SDHI1, 336),
+	INTC_IRQ(SDHI1, 337),
+
+	INTC_IRQ(RTC, 338), INTC_IRQ(RTC, 339),
+	INTC_IRQ(RTC, 340),
+
+	INTC_IRQ(SRCC0, 341), INTC_IRQ(SRCC0, 342),
+	INTC_IRQ(SRCC0, 343), INTC_IRQ(SRCC0, 344),
+	INTC_IRQ(SRCC0, 345),
+	INTC_IRQ(SRCC1, 346), INTC_IRQ(SRCC1, 347),
+	INTC_IRQ(SRCC1, 348), INTC_IRQ(SRCC1, 349),
+	INTC_IRQ(SRCC1, 350),
+	INTC_IRQ(SRCC2, 351), INTC_IRQ(SRCC2, 352),
+	INTC_IRQ(SRCC2, 353), INTC_IRQ(SRCC2, 354),
+	INTC_IRQ(SRCC2, 355),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
+		   PINT4, PINT5, PINT6, PINT7),
+	INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
+	INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
+	INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
+	INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
+	INTC_GROUP(SCIF4, SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI),
+	INTC_GROUP(SCIF5, SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI),
+	INTC_GROUP(SCIF6, SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI),
+	INTC_GROUP(SCIF7, SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+	{ 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
+	{ 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0,  DMAC1, DMAC2,  DMAC3 } },
+	{ 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4,  DMAC5, DMAC6,  DMAC7 } },
+	{ 0xfffe0c04, 0, 16, 4, /* IPR08 */ { DMAC8,  DMAC9,
+					      DMAC10, DMAC11 } },
+	{ 0xfffe0c06, 0, 16, 4, /* IPR09 */ { DMAC12, DMAC13,
+					      DMAC14, DMAC15 } },
+	{ 0xfffe0c08, 0, 16, 4, /* IPR10 */ { USB, VDC4, VDC4, VDC4 } },
+	{ 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { 0, 0, 0, 0 } },
+	{ 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { CMT0, CMT1, BSC, WDT } },
+	{ 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { MTU0_ABCD, MTU0_VEF,
+					      MTU1_AB, MTU1_VU } },
+	{ 0xfffe0c10, 0, 16, 4, /* IPR14 */ { MTU2_AB, MTU2_VU,
+					      MTU3_ABCD, MTU3_TCI3V } },
+	{ 0xfffe0c12, 0, 16, 4, /* IPR15 */ { MTU4_ABCD, MTU4_TCI4V,
+					      PWMT1, PWMT2 } },
+	{ 0xfffe0c14, 0, 16, 4, /* IPR16 */ { 0, 0, 0, 0 } },
+	{ 0xfffe0c16, 0, 16, 4, /* IPR17 */ { ADC_ADI, SSIF0, SSII1, SSII2 } },
+	{ 0xfffe0c18, 0, 16, 4, /* IPR18 */ { SSII3, SSII4, SSII5,  RSPDIF} },
+	{ 0xfffe0c1a, 0, 16, 4, /* IPR19 */ { IIC30, IIC31, IIC32, IIC33 } },
+	{ 0xfffe0c1c, 0, 16, 4, /* IPR20 */ { SCIF0, SCIF1, SCIF2, SCIF3 } },
+	{ 0xfffe0c1e, 0, 16, 4, /* IPR21 */ { SCIF4, SCIF5, SCIF6, SCIF7 } },
+	{ 0xfffe0c20, 0, 16, 4, /* IPR22 */ { 0, RCAN0, RCAN1, RCAN2 } },
+	{ 0xfffe0c22, 0, 16, 4, /* IPR23 */ { RSPIC0, RSPIC1, 0, 0 } },
+	{ 0xfffe0c24, 0, 16, 4, /* IPR24 */ { IEBC, CD_ROMD, NFMC, 0 } },
+	{ 0xfffe0c26, 0, 16, 4, /* IPR25 */ { SDHI0, SDHI1, RTC, 0 } },
+	{ 0xfffe0c28, 0, 16, 4, /* IPR26 */ { SRCC0, SRCC1, SRCC2, 0 } },
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xfffe0808, 0, 16, /* PINTER */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7269", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xe8007000, 0x100),
+	DEFINE_RES_IRQ(259),
+	DEFINE_RES_IRQ(260),
+	DEFINE_RES_IRQ(261),
+	DEFINE_RES_IRQ(258),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xe8007800, 0x100),
+	DEFINE_RES_IRQ(263),
+	DEFINE_RES_IRQ(264),
+	DEFINE_RES_IRQ(265),
+	DEFINE_RES_IRQ(262),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xe8008000, 0x100),
+	DEFINE_RES_IRQ(267),
+	DEFINE_RES_IRQ(268),
+	DEFINE_RES_IRQ(269),
+	DEFINE_RES_IRQ(266),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xe8008800, 0x100),
+	DEFINE_RES_IRQ(271),
+	DEFINE_RES_IRQ(272),
+	DEFINE_RES_IRQ(273),
+	DEFINE_RES_IRQ(270),
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xe8009000, 0x100),
+	DEFINE_RES_IRQ(275),
+	DEFINE_RES_IRQ(276),
+	DEFINE_RES_IRQ(277),
+	DEFINE_RES_IRQ(274),
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xe8009800, 0x100),
+	DEFINE_RES_IRQ(279),
+	DEFINE_RES_IRQ(280),
+	DEFINE_RES_IRQ(281),
+	DEFINE_RES_IRQ(278),
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct plat_sci_port scif6_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif6_resources[] = {
+	DEFINE_RES_MEM(0xe800a000, 0x100),
+	DEFINE_RES_IRQ(283),
+	DEFINE_RES_IRQ(284),
+	DEFINE_RES_IRQ(285),
+	DEFINE_RES_IRQ(282),
+};
+
+static struct platform_device scif6_device = {
+	.name		= "sh-sci",
+	.id		= 6,
+	.resource	= scif6_resources,
+	.num_resources	= ARRAY_SIZE(scif6_resources),
+	.dev		= {
+		.platform_data	= &scif6_platform_data,
+	},
+};
+
+static struct plat_sci_port scif7_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif7_resources[] = {
+	DEFINE_RES_MEM(0xe800a800, 0x100),
+	DEFINE_RES_IRQ(287),
+	DEFINE_RES_IRQ(288),
+	DEFINE_RES_IRQ(289),
+	DEFINE_RES_IRQ(286),
+};
+
+static struct platform_device scif7_device = {
+	.name		= "sh-sci",
+	.id		= 7,
+	.resource	= scif7_resources,
+	.num_resources	= ARRAY_SIZE(scif7_resources),
+	.dev		= {
+		.platform_data	= &scif7_platform_data,
+	},
+};
+
+static struct sh_timer_config cmt_platform_data = {
+	.channels_mask = 3,
+};
+
+static struct resource cmt_resources[] = {
+	DEFINE_RES_MEM(0xfffec000, 0x10),
+	DEFINE_RES_IRQ(188),
+	DEFINE_RES_IRQ(189),
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh-cmt-16",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
+static struct resource mtu2_resources[] = {
+	DEFINE_RES_MEM(0xfffe4000, 0x400),
+	DEFINE_RES_IRQ_NAMED(192, "tgi0a"),
+	DEFINE_RES_IRQ_NAMED(203, "tgi1a"),
+};
+
+static struct platform_device mtu2_device = {
+	.name		= "sh-mtu2",
+	.id		= -1,
+	.resource	= mtu2_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_resources),
+};
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xfffe6000,
+		.end	= 0xfffe6000 + 0x30 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Shared Period/Carry/Alarm IRQ */
+		.start	= 338,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+/* USB Host */
+static struct r8a66597_platdata r8a66597_data = {
+	.on_chip = 1,
+	.endian = 1,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.start	= 0xe8010000,
+		.end	= 0xe80100e4,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 170,
+		.end	= 170,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct platform_device *sh7269_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&scif7_device,
+	&cmt_device,
+	&mtu2_device,
+	&rtc_device,
+	&r8a66597_usb_host_device,
+};
+
+static int __init sh7269_devices_setup(void)
+{
+	return platform_add_devices(sh7269_devices,
+				    ARRAY_SIZE(sh7269_devices));
+}
+arch_initcall(sh7269_devices_setup);
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
+
+static struct platform_device *sh7269_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&scif7_device,
+	&cmt_device,
+	&mtu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7269_early_devices,
+				   ARRAY_SIZE(sh7269_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/Makefile b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/Makefile
new file mode 100644
index 0000000..1dcb43d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/Makefile
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Linux/SuperH SH-3 backends.
+#
+
+obj-y	:= ex.o probe.o entry.o setup-sh3.o
+
+obj-$(CONFIG_HIBERNATION)		+= swsusp.o
+
+# CPU subtype setup
+obj-$(CONFIG_CPU_SUBTYPE_SH7705)	+= setup-sh7705.o serial-sh770x.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7706)	+= setup-sh770x.o serial-sh770x.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7707)	+= setup-sh770x.o serial-sh770x.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7708)	+= setup-sh770x.o serial-sh770x.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7709)	+= setup-sh770x.o serial-sh770x.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7710)	+= setup-sh7710.o serial-sh7710.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7712)	+= setup-sh7710.o serial-sh7710.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7720)	+= setup-sh7720.o serial-sh7720.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7721)	+= setup-sh7720.o serial-sh7720.o
+
+# Primary on-chip clocks (common)
+clock-$(CONFIG_CPU_SH3)			:= clock-sh3.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7705)	:= clock-sh7705.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7706)	:= clock-sh7706.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7709)	:= clock-sh7709.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7710)	:= clock-sh7710.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7720)	:= clock-sh7710.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7712)	:= clock-sh7712.o
+
+# Pinmux setup
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7720)	:= pinmux-sh7720.o
+
+obj-y	+= $(clock-y)
+obj-$(CONFIG_GPIOLIB)			+= $(pinmux-y)
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh3.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh3.c
new file mode 100644
index 0000000..90faa44
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh3.c
@@ -0,0 +1,89 @@
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh3.c
+ *
+ * Generic SH-3 support for the clock framework
+ *
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * FRQCR parsing hacked out of arch/sh/kernel/time.c
+ *
+ *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
+ *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
+ *  Copyright (C) 2002, 2003, 2004  Paul Mundt
+ *  Copyright (C) 2002  M. R. Brown  <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
+static int ifc_divisors[]    = { 1, 2, 3, 4, 1, 1, 1, 1 };
+static int pfc_divisors[]    = { 1, 2, 3, 4, 6, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+	int frqcr = __raw_readw(FRQCR);
+	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+	clk->rate *= pfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh3_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static unsigned long module_clk_recalc(struct clk *clk)
+{
+	int frqcr = __raw_readw(FRQCR);
+	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+	return clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh3_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static unsigned long bus_clk_recalc(struct clk *clk)
+{
+	int frqcr = __raw_readw(FRQCR);
+	int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
+
+	return clk->parent->rate / stc_multipliers[idx];
+}
+
+static struct sh_clk_ops sh3_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static unsigned long cpu_clk_recalc(struct clk *clk)
+{
+	int frqcr = __raw_readw(FRQCR);
+	int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
+
+	return clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct sh_clk_ops sh3_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct sh_clk_ops *sh3_clk_ops[] = {
+	&sh3_master_clk_ops,
+	&sh3_module_clk_ops,
+	&sh3_bus_clk_ops,
+	&sh3_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh3_clk_ops))
+		*ops = sh3_clk_ops[idx];
+}
+
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh7705.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh7705.c
new file mode 100644
index 0000000..a8da4a9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh7705.c
@@ -0,0 +1,84 @@
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh7705.c
+ *
+ * SH7705 support for the clock framework
+ *
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * FRQCR parsing hacked out of arch/sh/kernel/time.c
+ *
+ *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
+ *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
+ *  Copyright (C) 2002, 2003, 2004  Paul Mundt
+ *  Copyright (C) 2002  M. R. Brown  <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+/*
+ * SH7705 uses the same divisors as the generic SH-3 case, it's just the
+ * FRQCR layout that is a bit different..
+ */
+static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
+static int ifc_divisors[]    = { 1, 2, 3, 4, 1, 1, 1, 1 };
+static int pfc_divisors[]    = { 1, 2, 3, 4, 6, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0003];
+}
+
+static struct sh_clk_ops sh7705_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static unsigned long module_clk_recalc(struct clk *clk)
+{
+	int idx = __raw_readw(FRQCR) & 0x0003;
+	return clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7705_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static unsigned long bus_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(FRQCR) & 0x0300) >> 8;
+	return clk->parent->rate / stc_multipliers[idx];
+}
+
+static struct sh_clk_ops sh7705_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static unsigned long cpu_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(FRQCR) & 0x0030) >> 4;
+	return clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7705_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct sh_clk_ops *sh7705_clk_ops[] = {
+	&sh7705_master_clk_ops,
+	&sh7705_module_clk_ops,
+	&sh7705_bus_clk_ops,
+	&sh7705_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7705_clk_ops))
+		*ops = sh7705_clk_ops[idx];
+}
+
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh7706.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh7706.c
new file mode 100644
index 0000000..a4088e5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh7706.c
@@ -0,0 +1,84 @@
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh7706.c
+ *
+ * SH7706 support for the clock framework
+ *
+ *  Copyright (C) 2006  Takashi YOSHII
+ *
+ * Based on arch/sh/kernel/cpu/sh3/clock-sh7709.c
+ *  Copyright (C) 2005  Andriy Skulysh
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int stc_multipliers[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
+static int ifc_divisors[]    = { 1, 2, 4, 1, 3, 1, 1, 1 };
+static int pfc_divisors[]    = { 1, 2, 4, 1, 3, 6, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+	int frqcr = __raw_readw(FRQCR);
+	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+	clk->rate *= pfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7706_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static unsigned long module_clk_recalc(struct clk *clk)
+{
+	int frqcr = __raw_readw(FRQCR);
+	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+	return clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7706_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static unsigned long bus_clk_recalc(struct clk *clk)
+{
+	int frqcr = __raw_readw(FRQCR);
+	int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
+
+	return clk->parent->rate / stc_multipliers[idx];
+}
+
+static struct sh_clk_ops sh7706_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static unsigned long cpu_clk_recalc(struct clk *clk)
+{
+	int frqcr = __raw_readw(FRQCR);
+	int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
+
+	return clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7706_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct sh_clk_ops *sh7706_clk_ops[] = {
+	&sh7706_master_clk_ops,
+	&sh7706_module_clk_ops,
+	&sh7706_bus_clk_ops,
+	&sh7706_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7706_clk_ops))
+		*ops = sh7706_clk_ops[idx];
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh7709.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh7709.c
new file mode 100644
index 0000000..54a6d4b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh7709.c
@@ -0,0 +1,85 @@
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh7709.c
+ *
+ * SH7709 support for the clock framework
+ *
+ *  Copyright (C) 2005  Andriy Skulysh
+ *
+ * Based on arch/sh/kernel/cpu/sh3/clock-sh7705.c
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int stc_multipliers[] = { 1, 2, 4, 8, 3, 6, 1, 1 };
+static int ifc_divisors[]    = { 1, 2, 4, 1, 3, 1, 1, 1 };
+static int pfc_divisors[]    = { 1, 2, 4, 1, 3, 6, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+	int frqcr = __raw_readw(FRQCR);
+	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+	clk->rate *= pfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7709_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static unsigned long module_clk_recalc(struct clk *clk)
+{
+	int frqcr = __raw_readw(FRQCR);
+	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+	return clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7709_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static unsigned long bus_clk_recalc(struct clk *clk)
+{
+	int frqcr = __raw_readw(FRQCR);
+	int idx = (frqcr & 0x0080) ?
+		((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4) : 1;
+
+	return clk->parent->rate * stc_multipliers[idx];
+}
+
+static struct sh_clk_ops sh7709_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static unsigned long cpu_clk_recalc(struct clk *clk)
+{
+	int frqcr = __raw_readw(FRQCR);
+	int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
+
+	return clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7709_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct sh_clk_ops *sh7709_clk_ops[] = {
+	&sh7709_master_clk_ops,
+	&sh7709_module_clk_ops,
+	&sh7709_bus_clk_ops,
+	&sh7709_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7709_clk_ops))
+		*ops = sh7709_clk_ops[idx];
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh7710.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh7710.c
new file mode 100644
index 0000000..ce601b2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh7710.c
@@ -0,0 +1,78 @@
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh7710.c
+ *
+ * SH7710 support for the clock framework
+ *
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * FRQCR parsing hacked out of arch/sh/kernel/time.c
+ *
+ *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
+ *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
+ *  Copyright (C) 2002, 2003, 2004  Paul Mundt
+ *  Copyright (C) 2002  M. R. Brown  <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 };
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= md_table[__raw_readw(FRQCR) & 0x0007];
+}
+
+static struct sh_clk_ops sh7710_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static unsigned long module_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(FRQCR) & 0x0007);
+	return clk->parent->rate / md_table[idx];
+}
+
+static struct sh_clk_ops sh7710_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static unsigned long bus_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(FRQCR) & 0x0700) >> 8;
+	return clk->parent->rate / md_table[idx];
+}
+
+static struct sh_clk_ops sh7710_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static unsigned long cpu_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(FRQCR) & 0x0070) >> 4;
+	return clk->parent->rate / md_table[idx];
+}
+
+static struct sh_clk_ops sh7710_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct sh_clk_ops *sh7710_clk_ops[] = {
+	&sh7710_master_clk_ops,
+	&sh7710_module_clk_ops,
+	&sh7710_bus_clk_ops,
+	&sh7710_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7710_clk_ops))
+		*ops = sh7710_clk_ops[idx];
+}
+
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh7712.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh7712.c
new file mode 100644
index 0000000..21438a9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/clock-sh7712.c
@@ -0,0 +1,71 @@
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh7712.c
+ *
+ * SH7712 support for the clock framework
+ *
+ *  Copyright (C) 2007  Andrew Murray <amurray@mpc-data.co.uk>
+ *
+ * Based on arch/sh/kernel/cpu/sh3/clock-sh3.c
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int multipliers[] = { 1, 2, 3 };
+static int divisors[]    = { 1, 2, 3, 4, 6 };
+
+static void master_clk_init(struct clk *clk)
+{
+	int frqcr = __raw_readw(FRQCR);
+	int idx = (frqcr & 0x0300) >> 8;
+
+	clk->rate *= multipliers[idx];
+}
+
+static struct sh_clk_ops sh7712_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static unsigned long module_clk_recalc(struct clk *clk)
+{
+	int frqcr = __raw_readw(FRQCR);
+	int idx = frqcr & 0x0007;
+
+	return clk->parent->rate / divisors[idx];
+}
+
+static struct sh_clk_ops sh7712_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static unsigned long cpu_clk_recalc(struct clk *clk)
+{
+	int frqcr = __raw_readw(FRQCR);
+	int idx = (frqcr & 0x0030) >> 4;
+
+	return clk->parent->rate / divisors[idx];
+}
+
+static struct sh_clk_ops sh7712_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct sh_clk_ops *sh7712_clk_ops[] = {
+	&sh7712_master_clk_ops,
+	&sh7712_module_clk_ops,
+	&sh7712_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7712_clk_ops))
+		*ops = sh7712_clk_ops[idx];
+}
+
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/entry.S b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/entry.S
new file mode 100644
index 0000000..262db6e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/entry.S
@@ -0,0 +1,513 @@
+/*
+ * arch/sh/kernel/cpu/sh3/entry.S
+ *
+ *  Copyright (C) 1999, 2000, 2002  Niibe Yutaka
+ *  Copyright (C) 2003 - 2012  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/unistd.h>
+#include <cpu/mmu_context.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+
+! NOTE:
+! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
+! to be jumped is too far, but it causes illegal slot exception.
+
+/*	
+ * entry.S contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all interrupts
+ * and faults that can result in a task-switch.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ * NOTE: This code uses a convention that instructions in the delay slot
+ * of a transfer-control instruction are indented by an extra space, thus:
+ *
+ *    jmp	@k0	    ! control-transfer instruction
+ *     ldc	k1, ssr     ! delay slot
+ *
+ * Stack layout in 'ret_from_syscall':
+ * 	ptrace needs to have all regs on the stack.
+ *	if the order here is changed, it needs to be
+ *	updated in ptrace.c and ptrace.h
+ *
+ *	r0
+ *      ...
+ *	r15 = stack pointer
+ *	spc
+ *	pr
+ *	ssr
+ *	gbr
+ *	mach
+ *	macl
+ *	syscall #
+ *
+ */
+/* Offsets to the stack */
+OFF_R0  =  0		/* Return value. New ABI also arg4 */
+OFF_R1  =  4     	/* New ABI: arg5 */
+OFF_R2  =  8     	/* New ABI: arg6 */
+OFF_R3  =  12     	/* New ABI: syscall_nr */
+OFF_R4  =  16     	/* New ABI: arg0 */
+OFF_R5  =  20     	/* New ABI: arg1 */
+OFF_R6  =  24     	/* New ABI: arg2 */
+OFF_R7  =  28     	/* New ABI: arg3 */
+OFF_SP	=  (15*4)
+OFF_PC  =  (16*4)
+OFF_SR	=  (16*4+8)
+OFF_TRA	=  (16*4+6*4)
+
+#define k0	r0
+#define k1	r1
+#define k2	r2
+#define k3	r3
+#define k4	r4
+
+#define g_imask		r6	/* r6_bank1 */
+#define k_g_imask	r6_bank	/* r6_bank1 */
+#define current		r7	/* r7_bank1 */
+
+#include <asm/entry-macros.S>
+	
+/*
+ * Kernel mode register usage:
+ *	k0	scratch
+ *	k1	scratch
+ *	k2	scratch (Exception code)
+ *	k3	scratch (Return address)
+ *	k4	scratch
+ *	k5	reserved
+ *	k6	Global Interrupt Mask (0--15 << 4)
+ *	k7	CURRENT_THREAD_INFO (pointer to current thread info)
+ */
+
+!
+! TLB Miss / Initial Page write exception handling
+!			_and_
+! TLB hits, but the access violate the protection.
+! It can be valid access, such as stack grow and/or C-O-W.
+!
+!
+! Find the pmd/pte entry and loadtlb
+! If it's not found, cause address error (SEGV)
+!
+! Although this could be written in assembly language (and it'd be faster),
+! this first version depends *much* on C implementation.
+!
+
+#if defined(CONFIG_MMU)
+	.align	2
+ENTRY(tlb_miss_load)
+	bra	call_handle_tlbmiss
+	 mov	#0, r5
+
+	.align	2
+ENTRY(tlb_miss_store)
+	bra	call_handle_tlbmiss
+	 mov	#FAULT_CODE_WRITE, r5
+
+	.align	2
+ENTRY(initial_page_write)
+	bra	call_handle_tlbmiss
+	 mov	#FAULT_CODE_INITIAL, r5
+
+	.align	2
+ENTRY(tlb_protection_violation_load)
+	bra	call_do_page_fault
+	 mov	#FAULT_CODE_PROT, r5
+
+	.align	2
+ENTRY(tlb_protection_violation_store)
+	bra	call_do_page_fault
+	 mov	#(FAULT_CODE_PROT | FAULT_CODE_WRITE), r5
+
+call_handle_tlbmiss:
+	mov.l	1f, r0
+	mov	r5, r8
+	mov.l	@r0, r6
+	mov.l	2f, r0
+	sts	pr, r10
+	jsr	@r0
+	 mov	r15, r4
+	!
+	tst	r0, r0
+	bf/s	0f
+	 lds	r10, pr
+	rts
+	 nop
+0:
+	mov	r8, r5
+call_do_page_fault:
+	mov.l	1f, r0
+	mov.l	@r0, r6
+
+	mov.l	3f, r0
+	mov.l	4f, r1
+	mov	r15, r4
+	jmp	@r0
+	 lds	r1, pr
+
+	.align 2
+1:	.long	MMU_TEA
+2:	.long	handle_tlbmiss
+3:	.long	do_page_fault
+4:	.long	ret_from_exception
+
+	.align	2
+ENTRY(address_error_load)
+	bra	call_dae
+	 mov	#0,r5		! writeaccess = 0
+
+	.align	2
+ENTRY(address_error_store)
+	bra	call_dae
+	 mov	#1,r5		! writeaccess = 1
+
+	.align	2
+call_dae:
+	mov.l	1f, r0
+	mov.l	@r0, r6		! address
+	mov.l	2f, r0
+	jmp	@r0
+	 mov	r15, r4		! regs
+
+	.align 2
+1:	.long	MMU_TEA
+2:	.long   do_address_error
+#endif /* CONFIG_MMU */
+
+#if defined(CONFIG_SH_STANDARD_BIOS)
+	/* Unwind the stack and jmp to the debug entry */
+ENTRY(sh_bios_handler)
+	mov.l	1f, r8
+	bsr	restore_regs
+	 nop
+
+	lds	k2, pr			! restore pr
+	mov	k4, r15
+	!
+	mov.l	2f, k0
+	mov.l	@k0, k0
+	jmp	@k0
+	 ldc	k3, ssr
+	.align	2
+1:	.long	0x300000f0
+2:	.long	gdb_vbr_vector
+#endif /* CONFIG_SH_STANDARD_BIOS */
+
+! restore_regs()
+! - restore r0, r1, r2, r3, r4, r5, r6, r7 from the stack
+! - switch bank
+! - restore r8, r9, r10, r11, r12, r13, r14, r15 from the stack
+! - restore spc, pr*, ssr, gbr, mach, macl, skip default tra
+! k2 returns original pr
+! k3 returns original sr
+! k4 returns original stack pointer
+! r8 passes SR bitmask, overwritten with restored data on return
+! r9 trashed
+! BL=0 on entry, on exit BL=1 (depending on r8).
+
+ENTRY(restore_regs)
+	mov.l	@r15+, r0
+	mov.l	@r15+, r1
+	mov.l	@r15+, r2
+	mov.l	@r15+, r3
+	mov.l	@r15+, r4
+	mov.l	@r15+, r5
+	mov.l	@r15+, r6
+	mov.l	@r15+, r7
+	!
+	stc	sr, r9
+	or	r8, r9
+	ldc	r9, sr
+	!
+	mov.l	@r15+, r8
+	mov.l	@r15+, r9
+	mov.l	@r15+, r10
+	mov.l	@r15+, r11
+	mov.l	@r15+, r12
+	mov.l	@r15+, r13
+	mov.l	@r15+, r14
+	mov.l	@r15+, k4		! original stack pointer
+	ldc.l	@r15+, spc
+	mov.l	@r15+, k2		! original PR
+	mov.l	@r15+, k3		! original SR
+	ldc.l	@r15+, gbr
+	lds.l	@r15+, mach
+	lds.l	@r15+, macl
+	rts
+	 add	#4, r15			! Skip syscall number
+
+restore_all:
+	mov.l	7f, r8
+	bsr	restore_regs
+	 nop
+
+	lds	k2, pr			! restore pr
+	!
+	! Calculate new SR value
+	mov	k3, k2			! original SR value
+	mov	#0xfffffff0, k1
+	extu.b	k1, k1
+	not	k1, k1
+	and	k1, k2			! Mask original SR value
+	!
+	mov	k3, k0			! Calculate IMASK-bits
+	shlr2	k0
+	and	#0x3c, k0
+	cmp/eq	#0x3c, k0
+	bt/s	6f
+	 shll2	k0
+	mov	g_imask, k0
+	!
+6:	or	k0, k2			! Set the IMASK-bits
+	ldc	k2, ssr
+	!
+	mov	k4, r15
+	rte
+	 nop
+
+	.align	2
+5:	.long	0x00001000	! DSP
+7:	.long	0x30000000
+
+! common exception handler
+#include "../../entry-common.S"
+	
+! Exception Vector Base
+!
+!	Should be aligned page boundary.
+!
+	.balign 	4096,0,4096
+ENTRY(vbr_base)
+	.long	0
+!
+! 0x100: General exception vector
+!
+	.balign 	256,0,256
+general_exception:
+	bra	handle_exception
+	 sts	pr, k3		! save original pr value in k3
+
+! prepare_stack()
+! - roll back gRB
+! - switch to kernel stack
+! k0 returns original sp (after roll back)
+! k1 trashed
+! k2 trashed
+
+prepare_stack:
+#ifdef CONFIG_GUSA
+	! Check for roll back gRB (User and Kernel)
+	mov	r15, k0
+	shll	k0
+	bf/s	1f
+	 shll	k0
+	bf/s	1f
+	 stc	spc, k1
+	stc	r0_bank, k0
+	cmp/hs	k0, k1		! test k1 (saved PC) >= k0 (saved r0)
+	bt/s	2f
+	 stc	r1_bank, k1
+
+	add	#-2, k0
+	add	r15, k0
+	ldc	k0, spc		! PC = saved r0 + r15 - 2
+2:	mov	k1, r15		! SP = r1
+1:
+#endif
+	! Switch to kernel stack if needed
+	stc	ssr, k0		! Is it from kernel space?
+	shll	k0		! Check MD bit (bit30) by shifting it into...
+	shll	k0		!       ...the T bit
+	bt/s	1f		! It's a kernel to kernel transition.
+	 mov	r15, k0		! save original stack to k0
+	/* User space to kernel */
+	mov	#(THREAD_SIZE >> 10), k1
+	shll8	k1		! k1 := THREAD_SIZE
+	shll2	k1
+	add	current, k1
+	mov	k1, r15		! change to kernel stack
+	!
+1:
+	rts
+	 nop
+
+!
+! 0x400: Instruction and Data TLB miss exception vector
+!
+	.balign 	1024,0,1024
+tlb_miss:
+	sts	pr, k3		! save original pr value in k3
+
+handle_exception:
+	mova	exception_data, k0
+
+	! Setup stack and save DSP context (k0 contains original r15 on return)
+	bsr	prepare_stack
+	 PREF(k0)
+
+	! Save registers / Switch to bank 0
+	mov.l	5f, k2		! vector register address
+	mov.l	1f, k4		! SR bits to clear in k4
+	bsr	save_regs	! needs original pr value in k3
+	 mov.l	@k2, k2		! read out vector and keep in k2
+
+handle_exception_special:
+	setup_frame_reg
+
+	! Setup return address and jump to exception handler
+	mov.l	7f, r9		! fetch return address
+	stc	r2_bank, r0	! k2 (vector)
+	mov.l	6f, r10
+	shlr2	r0
+	shlr	r0
+	mov.l	@(r0, r10), r10
+	jmp	@r10
+	 lds	r9, pr		! put return address in pr
+
+	.align	L1_CACHE_SHIFT
+
+! save_regs()
+! - save default tra, macl, mach, gbr, ssr, pr* and spc on the stack
+! - save r15*, r14, r13, r12, r11, r10, r9, r8 on the stack
+! - switch bank
+! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
+! k0 contains original stack pointer*
+! k1 trashed
+! k3 passes original pr*
+! k4 passes SR bitmask
+! BL=1 on entry, on exit BL=0.
+
+ENTRY(save_regs)
+	mov	#-1, r1
+	mov.l	k1, @-r15	! set TRA (default: -1)
+	sts.l	macl, @-r15
+	sts.l	mach, @-r15
+	stc.l	gbr, @-r15
+	stc.l	ssr, @-r15
+	mov.l	k3, @-r15	! original pr in k3
+	stc.l	spc, @-r15
+
+	mov.l	k0, @-r15	! original stack pointer in k0
+	mov.l	r14, @-r15
+	mov.l	r13, @-r15
+	mov.l	r12, @-r15
+	mov.l	r11, @-r15
+	mov.l	r10, @-r15
+	mov.l	r9, @-r15
+	mov.l	r8, @-r15
+
+	mov.l	0f, k3		! SR bits to set in k3
+
+	! fall-through
+
+! save_low_regs()
+! - modify SR for bank switch
+! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
+! k3 passes bits to set in SR
+! k4 passes bits to clear in SR
+
+ENTRY(save_low_regs)
+	stc	sr, r8
+	or	k3, r8
+	and	k4, r8
+	ldc	r8, sr
+
+	mov.l	r7, @-r15
+	mov.l	r6, @-r15
+	mov.l	r5, @-r15
+	mov.l	r4, @-r15
+	mov.l	r3, @-r15
+	mov.l	r2, @-r15
+	mov.l	r1, @-r15
+	rts
+	 mov.l	r0, @-r15
+
+!
+! 0x600: Interrupt / NMI vector
+!
+	.balign 	512,0,512
+ENTRY(handle_interrupt)
+	sts	pr, k3		! save original pr value in k3
+	mova	exception_data, k0
+
+	! Setup stack and save DSP context (k0 contains original r15 on return)
+	bsr	prepare_stack
+	 PREF(k0)
+
+	! Save registers / Switch to bank 0
+	mov.l	1f, k4		! SR bits to clear in k4
+	bsr	save_regs	! needs original pr value in k3
+	 mov	#-1, k2		! default vector kept in k2
+
+	setup_frame_reg
+
+	stc	sr, r0	! get status register
+	shlr2	r0
+	and	#0x3c, r0
+	cmp/eq	#0x3c, r0
+	bf	9f
+	TRACE_IRQS_OFF
+9:
+
+	! Setup return address and jump to do_IRQ
+	mov.l	4f, r9		! fetch return address
+	lds	r9, pr		! put return address in pr
+	mov.l	2f, r4
+	mov.l	3f, r9
+	mov.l	@r4, r4		! pass INTEVT vector as arg0
+
+	shlr2	r4
+	shlr	r4
+	mov	r4, r0		! save vector->jmp table offset for later
+
+	shlr2	r4		! vector to IRQ# conversion
+	add	#-0x10, r4
+
+	cmp/pz	r4		! is it a valid IRQ?
+	bt	10f
+
+	/*
+	 * We got here as a result of taking the INTEVT path for something
+	 * that isn't a valid hard IRQ, therefore we bypass the do_IRQ()
+	 * path and special case the event dispatch instead.  This is the
+	 * expected path for the NMI (and any other brilliantly implemented
+	 * exception), which effectively wants regular exception dispatch
+	 * but is unfortunately reported through INTEVT rather than
+	 * EXPEVT.  Grr.
+	 */
+	mov.l	6f, r9
+	mov.l	@(r0, r9), r9
+	jmp	@r9
+	 mov	r15, r8		! trap handlers take saved regs in r8
+
+10:
+	jmp	@r9		! Off to do_IRQ() we go.
+	 mov	r15, r5		! pass saved registers as arg1
+
+ENTRY(exception_none)
+	rts
+	 nop
+
+	.align	L1_CACHE_SHIFT
+exception_data:
+0:	.long	0x000080f0	! FD=1, IMASK=15
+1:	.long	0xcfffffff	! RB=0, BL=0
+2:	.long	INTEVT
+3:	.long	do_IRQ
+4:	.long	ret_from_irq
+5:	.long	EXPEVT
+6:	.long	exception_handling_table
+7:	.long	ret_from_exception
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/ex.S b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/ex.S
new file mode 100644
index 0000000..99b4d02
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/ex.S
@@ -0,0 +1,59 @@
+/*
+ *  arch/sh/kernel/cpu/sh3/ex.S
+ *
+ *  The SH-3 and SH-4 exception vector table.
+
+ *  Copyright (C) 1999, 2000, 2002  Niibe Yutaka
+ *  Copyright (C) 2003 - 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/linkage.h>
+
+#if !defined(CONFIG_MMU)
+#define	tlb_miss_load			exception_error
+#define tlb_miss_store			exception_error
+#define initial_page_write		exception_error
+#define tlb_protection_violation_load	exception_error
+#define tlb_protection_violation_store	exception_error
+#define address_error_load		exception_error
+#define address_error_store		exception_error
+#endif
+
+#if !defined(CONFIG_SH_FPU)
+#define	fpu_error_trap_handler		exception_error
+#endif
+
+#if !defined(CONFIG_KGDB)
+#define kgdb_handle_exception		exception_error
+#endif
+
+	.align 2
+	.data
+
+ENTRY(exception_handling_table)
+	.long	exception_error		/* 000 */
+	.long	exception_error
+	.long	tlb_miss_load		/* 040 */
+	.long	tlb_miss_store
+	.long	initial_page_write
+	.long	tlb_protection_violation_load
+	.long	tlb_protection_violation_store
+	.long	address_error_load
+	.long	address_error_store	/* 100 */
+	.long	fpu_error_trap_handler	/* 120 */
+	.long	exception_error		/* 140 */
+	.long	system_call	! Unconditional Trap	 /* 160 */
+	.long	exception_error	! reserved_instruction (filled by trap_init) /* 180 */
+	.long	exception_error	! illegal_slot_instruction (filled by trap_init) /*1A0*/
+	.long	nmi_trap_handler	/* 1C0 */	! Allow trap to debugger
+	.long	breakpoint_trap_handler	/* 1E0 */
+
+	/*
+	 * Pad the remainder of the table out, exceptions residing in far
+	 * away offsets can be manually inserted in to their appropriate
+	 * location via set_exception_table_{evt,vec}().
+	 */
+	.balign	4096,0,4096
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/pinmux-sh7720.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/pinmux-sh7720.c
new file mode 100644
index 0000000..26e90a6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/pinmux-sh7720.c
@@ -0,0 +1,30 @@
+/*
+ * SH7720 Pinmux
+ *
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <cpu/pfc.h>
+
+static struct resource sh7720_pfc_resources[] = {
+	[0] = {
+		.start	= 0xa4050100,
+		.end	= 0xa405016f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return sh_pfc_register("pfc-sh7720", sh7720_pfc_resources,
+			       ARRAY_SIZE(sh7720_pfc_resources));
+}
+arch_initcall(plat_pinmux_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/probe.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/probe.c
new file mode 100644
index 0000000..426e1e1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/probe.c
@@ -0,0 +1,111 @@
+/*
+ * arch/sh/kernel/cpu/sh3/probe.c
+ *
+ * CPU Subtype Probing for SH-3.
+ *
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ * Copyright (C) 2002  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+
+void cpu_probe(void)
+{
+	unsigned long addr0, addr1, data0, data1, data2, data3;
+
+	jump_to_uncached();
+	/*
+	 * Check if the entry shadows or not.
+	 * When shadowed, it's 128-entry system.
+	 * Otherwise, it's 256-entry system.
+	 */
+	addr0 = CACHE_OC_ADDRESS_ARRAY + (3 << 12);
+	addr1 = CACHE_OC_ADDRESS_ARRAY + (1 << 12);
+
+	/* First, write back & invalidate */
+	data0  = __raw_readl(addr0);
+	__raw_writel(data0&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr0);
+	data1  = __raw_readl(addr1);
+	__raw_writel(data1&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr1);
+
+	/* Next, check if there's shadow or not */
+	data0 = __raw_readl(addr0);
+	data0 ^= SH_CACHE_VALID;
+	__raw_writel(data0, addr0);
+	data1 = __raw_readl(addr1);
+	data2 = data1 ^ SH_CACHE_VALID;
+	__raw_writel(data2, addr1);
+	data3 = __raw_readl(addr0);
+
+	/* Lastly, invaliate them. */
+	__raw_writel(data0&~SH_CACHE_VALID, addr0);
+	__raw_writel(data2&~SH_CACHE_VALID, addr1);
+
+	back_to_cached();
+
+	boot_cpu_data.dcache.ways		= 4;
+	boot_cpu_data.dcache.entry_shift	= 4;
+	boot_cpu_data.dcache.linesz		= L1_CACHE_BYTES;
+	boot_cpu_data.dcache.flags		= 0;
+
+	/*
+	 * 7709A/7729 has 16K cache (256-entry), while 7702 has only
+	 * 2K(direct) 7702 is not supported (yet)
+	 */
+	if (data0 == data1 && data2 == data3) {	/* Shadow */
+		boot_cpu_data.dcache.way_incr	= (1 << 11);
+		boot_cpu_data.dcache.entry_mask	= 0x7f0;
+		boot_cpu_data.dcache.sets	= 128;
+		boot_cpu_data.type = CPU_SH7708;
+
+		boot_cpu_data.flags |= CPU_HAS_MMU_PAGE_ASSOC;
+	} else {				/* 7709A or 7729  */
+		boot_cpu_data.dcache.way_incr	= (1 << 12);
+		boot_cpu_data.dcache.entry_mask	= 0xff0;
+		boot_cpu_data.dcache.sets	= 256;
+		boot_cpu_data.type = CPU_SH7729;
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7706)
+		boot_cpu_data.type = CPU_SH7706;
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+		boot_cpu_data.type = CPU_SH7710;
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7712)
+		boot_cpu_data.type = CPU_SH7712;
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7720)
+		boot_cpu_data.type = CPU_SH7720;
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7721)
+		boot_cpu_data.type = CPU_SH7721;
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+		boot_cpu_data.type = CPU_SH7705;
+
+#if defined(CONFIG_SH7705_CACHE_32KB)
+		boot_cpu_data.dcache.way_incr	= (1 << 13);
+		boot_cpu_data.dcache.entry_mask	= 0x1ff0;
+		boot_cpu_data.dcache.sets	= 512;
+		__raw_writel(CCR_CACHE_32KB, CCR3_REG);
+#else
+		__raw_writel(CCR_CACHE_16KB, CCR3_REG);
+#endif
+#endif
+	}
+
+	/*
+	 * SH-3 doesn't have separate caches
+	 */
+	boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
+	boot_cpu_data.icache = boot_cpu_data.dcache;
+
+	boot_cpu_data.family = CPU_FAMILY_SH3;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/serial-sh770x.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/serial-sh770x.c
new file mode 100644
index 0000000..dec027f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/serial-sh770x.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/serial_sci.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+#include <cpu/serial.h>
+
+#define SCPCR 0xA4000116
+#define SCPDR 0xA4000136
+
+static void sh770x_sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	unsigned short data;
+
+	/* We need to set SCPCR to enable RTS/CTS */
+	data = __raw_readw(SCPCR);
+	/* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
+	__raw_writew(data & 0x0fcf, SCPCR);
+
+	if (!(cflag & CRTSCTS)) {
+		/* We need to set SCPCR to enable RTS/CTS */
+		data = __raw_readw(SCPCR);
+		/* Clear out SCP7MD1,0, SCP4MD1,0,
+		   Set SCP6MD1,0 = {01} (output)  */
+		__raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
+
+		data = __raw_readb(SCPDR);
+		/* Set /RTS2 (bit6) = 0 */
+		__raw_writeb(data & 0xbf, SCPDR);
+	}
+}
+
+struct plat_sci_port_ops sh770x_sci_port_ops = {
+	.init_pins	= sh770x_sci_init_pins,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/serial-sh7710.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/serial-sh7710.c
new file mode 100644
index 0000000..ee04052
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/serial-sh7710.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/serial_sci.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+#include <cpu/serial.h>
+
+#define PACR 0xa4050100
+#define PBCR 0xa4050102
+
+static void sh7710_sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	if (port->mapbase == 0xA4400000) {
+		__raw_writew(__raw_readw(PACR) & 0xffc0, PACR);
+		__raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR);
+	} else if (port->mapbase == 0xA4410000)
+		__raw_writew(__raw_readw(PBCR) & 0xf003, PBCR);
+}
+
+struct plat_sci_port_ops sh7710_sci_port_ops = {
+	.init_pins	= sh7710_sci_init_pins,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/serial-sh7720.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/serial-sh7720.c
new file mode 100644
index 0000000..75aaea4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/serial-sh7720.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/serial_sci.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+#include <cpu/serial.h>
+#include <cpu/gpio.h>
+
+static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	unsigned short data;
+
+	if (cflag & CRTSCTS) {
+		/* enable RTS/CTS */
+		if (port->mapbase == 0xa4430000) { /* SCIF0 */
+			/* Clear PTCR bit 9-2; enable all scif pins but sck */
+			data = __raw_readw(PORT_PTCR);
+			__raw_writew((data & 0xfc03), PORT_PTCR);
+		} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
+			/* Clear PVCR bit 9-2 */
+			data = __raw_readw(PORT_PVCR);
+			__raw_writew((data & 0xfc03), PORT_PVCR);
+		}
+	} else {
+		if (port->mapbase == 0xa4430000) { /* SCIF0 */
+			/* Clear PTCR bit 5-2; enable only tx and rx  */
+			data = __raw_readw(PORT_PTCR);
+			__raw_writew((data & 0xffc3), PORT_PTCR);
+		} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
+			/* Clear PVCR bit 5-2 */
+			data = __raw_readw(PORT_PVCR);
+			__raw_writew((data & 0xffc3), PORT_PVCR);
+		}
+	}
+}
+
+struct plat_sci_port_ops sh7720_sci_port_ops = {
+	.init_pins	= sh7720_sci_init_pins,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/setup-sh3.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/setup-sh3.c
new file mode 100644
index 0000000..53be70b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/setup-sh3.c
@@ -0,0 +1,71 @@
+/*
+ * Shared SH3 Setup code
+ *
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+/* All SH3 devices are equipped with IRQ0->5 (except sh7708) */
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
+};
+
+static struct intc_vect vectors_irq0123[] __initdata = {
+	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+};
+
+static struct intc_vect vectors_irq45[] __initdata = {
+	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
+	{ 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4000004, 0, 8, /* IRR0 */
+	  { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xa4000010, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh3-irq0123",
+			     vectors_irq0123, NULL, NULL,
+			     prio_registers, sense_registers, ack_registers);
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq45, "sh3-irq45",
+			     vectors_irq45, NULL, NULL,
+			     prio_registers, sense_registers, ack_registers);
+
+#define INTC_ICR1		0xa4000010UL
+#define INTC_ICR1_IRQLVL	(1<<14)
+
+void __init plat_irq_setup_pins(int mode)
+{
+	if (mode == IRQ_MODE_IRQ) {
+		__raw_writew(__raw_readw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
+		register_intc_controller(&intc_desc_irq0123);
+		return;
+	}
+	BUG();
+}
+
+void __init plat_irq_setup_sh3(void)
+{
+	register_intc_controller(&intc_desc_irq45);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/setup-sh7705.c
new file mode 100644
index 0000000..f6e392e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -0,0 +1,192 @@
+/*
+ * SH7705 Setup
+ *
+ *  Copyright (C) 2006 - 2009  Paul Mundt
+ *  Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <asm/rtc.h>
+#include <cpu/serial.h>
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
+	PINT07, PINT815,
+
+	DMAC, SCIF0, SCIF2, ADC_ADI, USB,
+
+	TPU0, TPU1, TPU2, TPU3,
+	TMU0, TMU1, TMU2,
+
+	RTC, WDT, REF_RCMI,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	/* IRQ0->5 are handled in setup-sh3.c */
+	INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
+	INTC_VECT(DMAC, 0x800), INTC_VECT(DMAC, 0x820),
+	INTC_VECT(DMAC, 0x840), INTC_VECT(DMAC, 0x860),
+	INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
+	INTC_VECT(SCIF0, 0x8e0),
+	INTC_VECT(SCIF2, 0x900), INTC_VECT(SCIF2, 0x920),
+	INTC_VECT(SCIF2, 0x960),
+	INTC_VECT(ADC_ADI, 0x980),
+	INTC_VECT(USB, 0xa20), INTC_VECT(USB, 0xa40),
+	INTC_VECT(TPU0, 0xc00), INTC_VECT(TPU1, 0xc20),
+	INTC_VECT(TPU2, 0xc80), INTC_VECT(TPU3, 0xca0),
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
+	INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+	INTC_VECT(RTC, 0x4c0),
+	INTC_VECT(WDT, 0x560),
+	INTC_VECT(REF_RCMI, 0x580),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
+	{ 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, 0, 0 } },
+	{ 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
+	{ 0xa4000018, 0, 16, 4, /* IPRD */ { PINT07, PINT815, IRQ5, IRQ4 } },
+	{ 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC, SCIF0, SCIF2, ADC_ADI } },
+	{ 0xa4080000, 0, 16, 4, /* IPRF */ { 0, 0, USB } },
+	{ 0xa4080002, 0, 16, 4, /* IPRG */ { TPU0, TPU1 } },
+	{ 0xa4080004, 0, 16, 4, /* IPRH */ { TPU2, TPU3 } },
+
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, NULL,
+			 NULL, prio_registers, NULL);
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_CKE1,
+	.type		= PORT_SCIF,
+	.ops		= &sh770x_sci_port_ops,
+	.regtype	= SCIx_SH7705_SCIF_REGTYPE,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xa4410000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x900)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.type		= PORT_SCIF,
+	.ops		= &sh770x_sci_port_ops,
+	.regtype	= SCIx_SH7705_SCIF_REGTYPE,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xa4400000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x880)),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct resource rtc_resources[] = {
+	[0] =	{
+		.start	= 0xfffffec0,
+		.end	= 0xfffffec0 + 0x1e,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] =	{
+		.start  = evt2irq(0x480),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_rtc_platform_info rtc_info = {
+	.capabilities	= RTC_CAP_4_DIGIT_YEAR,
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+	.dev		= {
+		.platform_data = &rtc_info,
+	},
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xfffffe90, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0x400)),
+	DEFINE_RES_IRQ(evt2irq(0x420)),
+	DEFINE_RES_IRQ(evt2irq(0x440)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu-sh3",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct platform_device *sh7705_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&tmu0_device,
+	&rtc_device,
+};
+
+static int __init sh7705_devices_setup(void)
+{
+	return platform_add_devices(sh7705_devices,
+				    ARRAY_SIZE(sh7705_devices));
+}
+arch_initcall(sh7705_devices_setup);
+
+static struct platform_device *sh7705_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&tmu0_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7705_early_devices,
+				   ARRAY_SIZE(sh7705_early_devices));
+}
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+	plat_irq_setup_sh3();
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/setup-sh770x.c
new file mode 100644
index 0000000..59a8861
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -0,0 +1,248 @@
+/*
+ * SH3 Setup code for SH7706, SH7707, SH7708, SH7709
+ *
+ *  Copyright (C) 2007  Magnus Damm
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ * Based on setup-sh7709.c
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <cpu/serial.h>
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
+	PINT07, PINT815,
+	DMAC, SCIF0, SCIF2, SCI, ADC_ADI,
+	LCDC, PCC0, PCC1,
+	TMU0, TMU1, TMU2,
+	RTC, WDT, REF,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
+	INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+	INTC_VECT(RTC, 0x4c0),
+	INTC_VECT(SCI, 0x4e0), INTC_VECT(SCI, 0x500),
+	INTC_VECT(SCI, 0x520), INTC_VECT(SCI, 0x540),
+	INTC_VECT(WDT, 0x560),
+	INTC_VECT(REF, 0x580),
+	INTC_VECT(REF, 0x5a0),
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7709)
+	/* IRQ0->5 are handled in setup-sh3.c */
+	INTC_VECT(DMAC, 0x800), INTC_VECT(DMAC, 0x820),
+	INTC_VECT(DMAC, 0x840), INTC_VECT(DMAC, 0x860),
+	INTC_VECT(ADC_ADI, 0x980),
+	INTC_VECT(SCIF2, 0x900), INTC_VECT(SCIF2, 0x920),
+	INTC_VECT(SCIF2, 0x940), INTC_VECT(SCIF2, 0x960),
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7709)
+	INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
+	INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
+	INTC_VECT(SCIF0, 0x8c0), INTC_VECT(SCIF0, 0x8e0),
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+	INTC_VECT(LCDC, 0x9a0),
+	INTC_VECT(PCC0, 0x9c0), INTC_VECT(PCC1, 0x9e0),
+#endif
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
+	{ 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, SCI, 0 } },
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7709)
+	{ 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
+	{ 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
+	{ 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC, 0, SCIF2, ADC_ADI } },
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7709)
+	{ 0xa4000018, 0, 16, 4, /* IPRD */ { PINT07, PINT815, } },
+	{ 0xa400001a, 0, 16, 4, /* IPRE */ { 0, SCIF0 } },
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+	{ 0xa400001c, 0, 16, 4, /* IPRF */ { 0, LCDC, PCC0, PCC1, } },
+#endif
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, NULL,
+			 NULL, prio_registers, NULL);
+
+static struct resource rtc_resources[] = {
+	[0] =	{
+		.start	= 0xfffffec0,
+		.end	= 0xfffffec0 + 0x1e,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] =	{
+		.start	= evt2irq(0x480),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+static struct plat_sci_port scif0_platform_data = {
+	.type		= PORT_SCI,
+	.ops		= &sh770x_sci_port_ops,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xfffffe80, 0x10),
+	DEFINE_RES_IRQ(evt2irq(0x4e0)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7709)
+static struct plat_sci_port scif1_platform_data = {
+	.type		= PORT_SCIF,
+	.ops		= &sh770x_sci_port_ops,
+	.regtype	= SCIx_SH3_SCIF_REGTYPE,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xa4000150, 0x10),
+	DEFINE_RES_IRQ(evt2irq(0x900)),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7709)
+static struct plat_sci_port scif2_platform_data = {
+	.type		= PORT_IRDA,
+	.ops		= &sh770x_sci_port_ops,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xa4000140, 0x10),
+	DEFINE_RES_IRQ(evt2irq(0x880)),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+#endif
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xfffffe90, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0x400)),
+	DEFINE_RES_IRQ(evt2irq(0x420)),
+	DEFINE_RES_IRQ(evt2irq(0x440)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu-sh3",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct platform_device *sh770x_devices[] __initdata = {
+	&scif0_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7709)
+	&scif1_device,
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7709)
+	&scif2_device,
+#endif
+	&tmu0_device,
+	&rtc_device,
+};
+
+static int __init sh770x_devices_setup(void)
+{
+	return platform_add_devices(sh770x_devices,
+		ARRAY_SIZE(sh770x_devices));
+}
+arch_initcall(sh770x_devices_setup);
+
+static struct platform_device *sh770x_early_devices[] __initdata = {
+	&scif0_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7709)
+	&scif1_device,
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7709)
+	&scif2_device,
+#endif
+	&tmu0_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh770x_early_devices,
+				   ARRAY_SIZE(sh770x_early_devices));
+}
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7709)
+	plat_irq_setup_sh3();
+#endif
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/setup-sh7710.c
new file mode 100644
index 0000000..ea52410
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -0,0 +1,191 @@
+/*
+ * SH3 Setup code for SH7710, SH7712
+ *
+ *  Copyright (C) 2006 - 2009  Paul Mundt
+ *  Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <asm/rtc.h>
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
+	DMAC1, SCIF0, SCIF1, DMAC2, IPSEC,
+	EDMAC0, EDMAC1, EDMAC2,
+	SIOF0, SIOF1,
+
+	TMU0, TMU1, TMU2,
+	RTC, WDT, REF,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	/* IRQ0->5 are handled in setup-sh3.c */
+	INTC_VECT(DMAC1, 0x800), INTC_VECT(DMAC1, 0x820),
+	INTC_VECT(DMAC1, 0x840), INTC_VECT(DMAC1, 0x860),
+	INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
+	INTC_VECT(SCIF0, 0x8c0), INTC_VECT(SCIF0, 0x8e0),
+	INTC_VECT(SCIF1, 0x900), INTC_VECT(SCIF1, 0x920),
+	INTC_VECT(SCIF1, 0x940), INTC_VECT(SCIF1, 0x960),
+	INTC_VECT(DMAC2, 0xb80), INTC_VECT(DMAC2, 0xba0),
+#ifdef CONFIG_CPU_SUBTYPE_SH7710
+	INTC_VECT(IPSEC, 0xbe0),
+#endif
+	INTC_VECT(EDMAC0, 0xc00), INTC_VECT(EDMAC1, 0xc20),
+	INTC_VECT(EDMAC2, 0xc40),
+	INTC_VECT(SIOF0, 0xe00), INTC_VECT(SIOF0, 0xe20),
+	INTC_VECT(SIOF0, 0xe40), INTC_VECT(SIOF0, 0xe60),
+	INTC_VECT(SIOF1, 0xe80), INTC_VECT(SIOF1, 0xea0),
+	INTC_VECT(SIOF1, 0xec0), INTC_VECT(SIOF1, 0xee0),
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440),
+	INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+	INTC_VECT(RTC, 0x4c0),
+	INTC_VECT(WDT, 0x560),
+	INTC_VECT(REF, 0x580),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
+	{ 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } },
+	{ 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
+	{ 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
+	{ 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC1, SCIF0, SCIF1 } },
+	{ 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC, DMAC2 } },
+	{ 0xa4080002, 0, 16, 4, /* IPRG */ { EDMAC0, EDMAC1, EDMAC2 } },
+	{ 0xa4080004, 0, 16, 4, /* IPRH */ { 0, 0, 0, SIOF0 } },
+	{ 0xa4080006, 0, 16, 4, /* IPRI */ { 0, 0, SIOF1 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, NULL,
+			 NULL, prio_registers, NULL);
+
+static struct resource rtc_resources[] = {
+	[0] =	{
+		.start	= 0xa413fec0,
+		.end	= 0xa413fec0 + 0x1e,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] =	{
+		.start  = evt2irq(0x480),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_rtc_platform_info rtc_info = {
+	.capabilities	= RTC_CAP_4_DIGIT_YEAR,
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+	.dev		= {
+		.platform_data = &rtc_info,
+	},
+};
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_CKE1,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xa4400000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x880)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_CKE1,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xa4410000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x900)),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xa412fe90, 0x28),
+	DEFINE_RES_IRQ(evt2irq(0x400)),
+	DEFINE_RES_IRQ(evt2irq(0x420)),
+	DEFINE_RES_IRQ(evt2irq(0x440)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu-sh3",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct platform_device *sh7710_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&tmu0_device,
+	&rtc_device,
+};
+
+static int __init sh7710_devices_setup(void)
+{
+	return platform_add_devices(sh7710_devices,
+				    ARRAY_SIZE(sh7710_devices));
+}
+arch_initcall(sh7710_devices_setup);
+
+static struct platform_device *sh7710_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&tmu0_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7710_early_devices,
+				   ARRAY_SIZE(sh7710_early_devices));
+}
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+	plat_irq_setup_sh3();
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/setup-sh7720.c
new file mode 100644
index 0000000..bf34b4e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/setup-sh7720.c
@@ -0,0 +1,288 @@
+/*
+ * Setup code for SH7720, SH7721.
+ *
+ *  Copyright (C) 2007  Markus Brunner, Mark Jonas
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ *  Based on arch/sh/kernel/cpu/sh4/setup-sh7750.c:
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2006  Jamie Lenehan
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <asm/rtc.h>
+#include <cpu/serial.h>
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xa413fec0,
+		.end	= 0xa413fec0 + 0x28 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Shared Period/Carry/Alarm IRQ */
+		.start	= evt2irq(0x480),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_rtc_platform_info rtc_info = {
+	.capabilities	= RTC_CAP_4_DIGIT_YEAR,
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+	.dev		= {
+		.platform_data = &rtc_info,
+	},
+};
+
+static struct plat_sci_port scif0_platform_data = {
+	.type		= PORT_SCIF,
+	.ops		= &sh7720_sci_port_ops,
+	.regtype	= SCIx_SH7705_SCIF_REGTYPE,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xa4430000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc00)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.type		= PORT_SCIF,
+	.ops		= &sh7720_sci_port_ops,
+	.regtype	= SCIx_SH7705_SCIF_REGTYPE,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xa4438000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc20)),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct resource usb_ohci_resources[] = {
+	[0] = {
+		.start	= 0xA4428000,
+		.end	= 0xA44280FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa60),
+		.end	= evt2irq(0xa60),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 usb_ohci_dma_mask = 0xffffffffUL;
+
+static struct usb_ohci_pdata usb_ohci_pdata;
+
+static struct platform_device usb_ohci_device = {
+	.name		= "ohci-platform",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &usb_ohci_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb_ohci_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(usb_ohci_resources),
+	.resource	= usb_ohci_resources,
+};
+
+static struct resource usbf_resources[] = {
+	[0] = {
+		.name	= "sh_udc",
+		.start	= 0xA4420000,
+		.end	= 0xA44200FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "sh_udc",
+		.start	= evt2irq(0xa20),
+		.end	= evt2irq(0xa20),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usbf_device = {
+	.name		= "sh_udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(usbf_resources),
+	.resource	= usbf_resources,
+};
+
+static struct sh_timer_config cmt_platform_data = {
+	.channels_mask = 0x1f,
+};
+
+static struct resource cmt_resources[] = {
+	DEFINE_RES_MEM(0x044a0000, 0x60),
+	DEFINE_RES_IRQ(evt2irq(0xf00)),
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh-cmt-32",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xa412fe90, 0x28),
+	DEFINE_RES_IRQ(evt2irq(0x400)),
+	DEFINE_RES_IRQ(evt2irq(0x420)),
+	DEFINE_RES_IRQ(evt2irq(0x440)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu-sh3",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct platform_device *sh7720_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&cmt_device,
+	&tmu0_device,
+	&rtc_device,
+	&usb_ohci_device,
+	&usbf_device,
+};
+
+static int __init sh7720_devices_setup(void)
+{
+	return platform_add_devices(sh7720_devices,
+				    ARRAY_SIZE(sh7720_devices));
+}
+arch_initcall(sh7720_devices_setup);
+
+static struct platform_device *sh7720_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&cmt_device,
+	&tmu0_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7720_early_devices,
+				   ARRAY_SIZE(sh7720_early_devices));
+}
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	TMU0, TMU1, TMU2, RTC,
+	WDT, REF_RCMI, SIM,
+	IRQ0, IRQ1, IRQ2, IRQ3,
+	USBF_SPD, TMU_SUNI, IRQ5, IRQ4,
+	DMAC1, LCDC, SSL,
+	ADC, DMAC2, USBFI, CMT,
+	SCIF0, SCIF1,
+	PINT07, PINT815, TPU, IIC,
+	SIOF0, SIOF1, MMC, PCC,
+	USBHI, AFEIF,
+	H_UDI,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	/* IRQ0->5 are handled in setup-sh3.c */
+	INTC_VECT(TMU0, 0x400),       INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440),       INTC_VECT(RTC, 0x480),
+	INTC_VECT(RTC, 0x4a0),	      INTC_VECT(RTC, 0x4c0),
+	INTC_VECT(SIM, 0x4e0),	      INTC_VECT(SIM, 0x500),
+	INTC_VECT(SIM, 0x520),	      INTC_VECT(SIM, 0x540),
+	INTC_VECT(WDT, 0x560),        INTC_VECT(REF_RCMI, 0x580),
+	/* H_UDI cannot be masked */  INTC_VECT(TMU_SUNI, 0x6c0),
+	INTC_VECT(USBF_SPD, 0x6e0),   INTC_VECT(DMAC1, 0x800),
+	INTC_VECT(DMAC1, 0x820),      INTC_VECT(DMAC1, 0x840),
+	INTC_VECT(DMAC1, 0x860),      INTC_VECT(LCDC, 0x900),
+#if defined(CONFIG_CPU_SUBTYPE_SH7720)
+	INTC_VECT(SSL, 0x980),
+#endif
+	INTC_VECT(USBFI, 0xa20),      INTC_VECT(USBFI, 0xa40),
+	INTC_VECT(USBHI, 0xa60),
+	INTC_VECT(DMAC2, 0xb80),      INTC_VECT(DMAC2, 0xba0),
+	INTC_VECT(ADC, 0xbe0),        INTC_VECT(SCIF0, 0xc00),
+	INTC_VECT(SCIF1, 0xc20),      INTC_VECT(PINT07, 0xc80),
+	INTC_VECT(PINT815, 0xca0),    INTC_VECT(SIOF0, 0xd00),
+	INTC_VECT(SIOF1, 0xd20),      INTC_VECT(TPU, 0xd80),
+	INTC_VECT(TPU, 0xda0),        INTC_VECT(TPU, 0xdc0),
+	INTC_VECT(TPU, 0xde0),        INTC_VECT(IIC, 0xe00),
+	INTC_VECT(MMC, 0xe80),        INTC_VECT(MMC, 0xea0),
+	INTC_VECT(MMC, 0xec0),        INTC_VECT(MMC, 0xee0),
+	INTC_VECT(CMT, 0xf00),        INTC_VECT(PCC, 0xf60),
+	INTC_VECT(AFEIF, 0xfe0),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xA414FEE2UL, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
+	{ 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } },
+	{ 0xA4140016UL, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
+	{ 0xA4140018UL, 0, 16, 4, /* IPRD */ { USBF_SPD, TMU_SUNI, IRQ5, IRQ4 } },
+	{ 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, SSL } },
+	{ 0xA4080000UL, 0, 16, 4, /* IPRF */ { ADC, DMAC2, USBFI, CMT } },
+	{ 0xA4080002UL, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, 0, 0 } },
+	{ 0xA4080004UL, 0, 16, 4, /* IPRH */ { PINT07, PINT815, TPU, IIC } },
+	{ 0xA4080006UL, 0, 16, 4, /* IPRI */ { SIOF0, SIOF1, MMC, PCC } },
+	{ 0xA4080008UL, 0, 16, 4, /* IPRJ */ { 0, USBHI, 0, AFEIF } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, NULL,
+		NULL, prio_registers, NULL);
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+	plat_irq_setup_sh3();
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/swsusp.S b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/swsusp.S
new file mode 100644
index 0000000..0114542
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh3/swsusp.S
@@ -0,0 +1,147 @@
+/*
+ * arch/sh/kernel/cpu/sh3/swsusp.S
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/page.h>
+
+#define k0	r0
+#define k1	r1
+#define k2	r2
+#define k3	r3
+#define k4	r4
+
+! swsusp_arch_resume()
+! - copy restore_pblist pages
+! - restore registers from swsusp_arch_regs_cpu0
+
+ENTRY(swsusp_arch_resume)
+	mov.l	1f, r15
+	mov.l	2f, r4
+	mov.l	@r4, r4
+
+swsusp_copy_loop:
+	mov	r4, r0
+	cmp/eq	#0, r0
+	bt	swsusp_restore_regs
+
+	mov.l	@(PBE_ADDRESS, r4), r2
+	mov.l	@(PBE_ORIG_ADDRESS, r4), r5
+
+	mov	#(PAGE_SIZE >> 10), r3
+	shll8	r3
+	shlr2	r3 /* PAGE_SIZE / 16 */
+swsusp_copy_page:
+	dt	r3
+	mov.l	@r2+,r1   /*  16n+0 */
+	mov.l	r1,@r5
+	add	#4,r5
+	mov.l	@r2+,r1	  /*  16n+4 */
+	mov.l	r1,@r5
+	add	#4,r5
+	mov.l	@r2+,r1   /*  16n+8 */
+	mov.l	r1,@r5
+	add	#4,r5
+	mov.l	@r2+,r1   /*  16n+12 */
+	mov.l	r1,@r5
+	bf/s	swsusp_copy_page
+	 add	#4,r5
+
+	bra	swsusp_copy_loop
+	 mov.l	@(PBE_NEXT, r4), r4
+
+swsusp_restore_regs:
+	! BL=0: R7->R0 is bank0
+	mov.l	3f, r8
+	mov.l	4f, r5
+	jsr	@r5
+	 nop
+
+	! BL=1: R7->R0 is bank1
+	lds	k2, pr
+	ldc	k3, ssr
+
+	mov.l	@r15+, r0
+	mov.l	@r15+, r1
+	mov.l	@r15+, r2
+	mov.l	@r15+, r3
+	mov.l	@r15+, r4
+	mov.l	@r15+, r5
+	mov.l	@r15+, r6
+	mov.l	@r15+, r7
+
+	rte
+	 nop
+	! BL=0: R7->R0 is bank0
+
+	.align	2
+1:	.long	swsusp_arch_regs_cpu0
+2:	.long	restore_pblist
+3:	.long	0x20000000 ! RB=1
+4:	.long	restore_regs
+
+! swsusp_arch_suspend()
+! - prepare pc for resume, return from function without swsusp_save on resume
+! - save registers in swsusp_arch_regs_cpu0
+! - call swsusp_save write suspend image
+
+ENTRY(swsusp_arch_suspend)
+	sts	pr, r0		! save pr in r0
+	mov	r15, r2		! save sp in r2
+	mov	r8, r5		! save r8 in r5
+	stc	sr, r1
+	ldc	r1, ssr		! save sr in ssr
+	mov.l	1f, r1
+	ldc	r1, spc		! setup pc value for resuming
+	mov.l	5f, r15		! use swsusp_arch_regs_cpu0 as stack
+	mov.l	6f, r3
+	add	r3, r15		! save from top of structure
+
+	! BL=0: R7->R0 is bank0
+	mov.l	2f, r3		! get new SR value for bank1
+	mov	#0, r4
+	mov.l	7f, r1
+	jsr	@r1		! switch to bank1 and save bank1 r7->r0
+	 not	r4, r4
+
+	! BL=1: R7->R0 is bank1
+	stc	r2_bank, k0	! fetch old sp from r2_bank0
+	mov.l	3f, k4		! SR bits to clear in k4
+	mov.l	8f, k1
+	jsr	@k1		! switch to bank0 and save all regs
+	 stc	r0_bank, k3	! fetch old pr from r0_bank0
+
+	! BL=0: R7->R0 is bank0
+	mov	r2, r15		! restore old sp
+	mov	r5, r8		! restore old r8
+	stc	ssr, r1
+	ldc	r1, sr		! restore old sr
+	lds	r0, pr		! restore old pr
+	mov.l	4f, r0
+	jmp	@r0
+	 nop
+
+swsusp_call_save:
+	mov	r2, r15		! restore old sp
+	mov	r5, r8		! restore old r8
+	lds	r0, pr		! restore old pr
+	rts
+	 mov	#0, r0
+
+	.align	2
+1:	.long	swsusp_call_save
+2:	.long	0x20000000 ! RB=1
+3:	.long	0xdfffffff ! RB=0
+4:	.long	swsusp_save
+5:	.long	swsusp_arch_regs_cpu0
+6:	.long	SWSUSP_ARCH_REGS_SIZE
+7:	.long	save_low_regs
+8:	.long	save_regs
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/Makefile b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/Makefile
new file mode 100644
index 0000000..00c1633
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/Makefile
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Linux/SuperH SH-4 backends.
+#
+
+obj-y	:= probe.o common.o
+common-y	+= $(addprefix ../sh3/, entry.o ex.o)
+
+obj-$(CONFIG_HIBERNATION)		+= $(addprefix ../sh3/, swsusp.o)
+obj-$(CONFIG_SH_FPU)			+= fpu.o softfloat.o
+obj-$(CONFIG_SH_STORE_QUEUES)		+= sq.o
+
+# Perf events
+perf-$(CONFIG_CPU_SUBTYPE_SH7750)	:= perf_event.o
+perf-$(CONFIG_CPU_SUBTYPE_SH7750S)	:= perf_event.o
+perf-$(CONFIG_CPU_SUBTYPE_SH7091)	:= perf_event.o
+
+# CPU subtype setup
+obj-$(CONFIG_CPU_SUBTYPE_SH7750)	+= setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7750R)	+= setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7750S)	+= setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7091)	+= setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7751R)	+= setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7760)	+= setup-sh7760.o
+obj-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= setup-sh4-202.o
+
+# Primary on-chip clocks (common)
+ifndef CONFIG_CPU_SH4A
+clock-$(CONFIG_CPU_SH4)			:= clock-sh4.o
+endif
+
+# Additional clocks by subtype
+clock-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= clock-sh4-202.o
+
+obj-y					+= $(clock-y)
+obj-$(CONFIG_PERF_EVENTS)		+= $(perf-y)
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
new file mode 100644
index 0000000..4b5bab5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@@ -0,0 +1,177 @@
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+ *
+ * Additional SH4-202 support for the clock framework
+ *
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+
+#define CPG2_FRQCR3	0xfe0a0018
+
+static int frqcr3_divisors[] = { 1, 2, 3, 4, 6, 8, 16 };
+static int frqcr3_values[]   = { 0, 1, 2, 3, 4, 5, 6  };
+
+static unsigned long emi_clk_recalc(struct clk *clk)
+{
+	int idx = __raw_readl(CPG2_FRQCR3) & 0x0007;
+	return clk->parent->rate / frqcr3_divisors[idx];
+}
+
+static inline int frqcr3_lookup(struct clk *clk, unsigned long rate)
+{
+	int divisor = clk->parent->rate / rate;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++)
+		if (frqcr3_divisors[i] == divisor)
+			return frqcr3_values[i];
+
+	/* Safe fallback */
+	return 5;
+}
+
+static struct sh_clk_ops sh4202_emi_clk_ops = {
+	.recalc		= emi_clk_recalc,
+};
+
+static struct clk sh4202_emi_clk = {
+	.flags		= CLK_ENABLE_ON_INIT,
+	.ops		= &sh4202_emi_clk_ops,
+};
+
+static unsigned long femi_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readl(CPG2_FRQCR3) >> 3) & 0x0007;
+	return clk->parent->rate / frqcr3_divisors[idx];
+}
+
+static struct sh_clk_ops sh4202_femi_clk_ops = {
+	.recalc		= femi_clk_recalc,
+};
+
+static struct clk sh4202_femi_clk = {
+	.flags		= CLK_ENABLE_ON_INIT,
+	.ops		= &sh4202_femi_clk_ops,
+};
+
+static void shoc_clk_init(struct clk *clk)
+{
+	int i;
+
+	/*
+	 * For some reason, the shoc_clk seems to be set to some really
+	 * insane value at boot (values outside of the allowable frequency
+	 * range for instance). We deal with this by scaling it back down
+	 * to something sensible just in case.
+	 *
+	 * Start scaling from the high end down until we find something
+	 * that passes rate verification..
+	 */
+	for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
+		int divisor = frqcr3_divisors[i];
+
+		if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
+			break;
+	}
+
+	WARN_ON(i == ARRAY_SIZE(frqcr3_divisors));	/* Undefined clock */
+}
+
+static unsigned long shoc_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readl(CPG2_FRQCR3) >> 6) & 0x0007;
+	return clk->parent->rate / frqcr3_divisors[idx];
+}
+
+static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate)
+{
+	struct clk *bclk = clk_get(NULL, "bus_clk");
+	unsigned long bclk_rate = clk_get_rate(bclk);
+
+	clk_put(bclk);
+
+	if (rate > bclk_rate)
+		return 1;
+	if (rate > 66000000)
+		return 1;
+
+	return 0;
+}
+
+static int shoc_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long frqcr3;
+	unsigned int tmp;
+
+	/* Make sure we have something sensible to switch to */
+	if (shoc_clk_verify_rate(clk, rate) != 0)
+		return -EINVAL;
+
+	tmp = frqcr3_lookup(clk, rate);
+
+	frqcr3 = __raw_readl(CPG2_FRQCR3);
+	frqcr3 &= ~(0x0007 << 6);
+	frqcr3 |= tmp << 6;
+	__raw_writel(frqcr3, CPG2_FRQCR3);
+
+	clk->rate = clk->parent->rate / frqcr3_divisors[tmp];
+
+	return 0;
+}
+
+static struct sh_clk_ops sh4202_shoc_clk_ops = {
+	.init		= shoc_clk_init,
+	.recalc		= shoc_clk_recalc,
+	.set_rate	= shoc_clk_set_rate,
+};
+
+static struct clk sh4202_shoc_clk = {
+	.flags		= CLK_ENABLE_ON_INIT,
+	.ops		= &sh4202_shoc_clk_ops,
+};
+
+static struct clk *sh4202_onchip_clocks[] = {
+	&sh4202_emi_clk,
+	&sh4202_femi_clk,
+	&sh4202_shoc_clk,
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("emi_clk", &sh4202_emi_clk),
+	CLKDEV_CON_ID("femi_clk", &sh4202_femi_clk),
+	CLKDEV_CON_ID("shoc_clk", &sh4202_shoc_clk),
+};
+
+int __init arch_clk_init(void)
+{
+	struct clk *clk;
+	int i, ret = 0;
+
+	cpg_clk_init();
+
+	clk = clk_get(NULL, "master_clk");
+	for (i = 0; i < ARRAY_SIZE(sh4202_onchip_clocks); i++) {
+		struct clk *clkp = sh4202_onchip_clocks[i];
+
+		clkp->parent = clk;
+		ret |= clk_register(clkp);
+	}
+
+	clk_put(clk);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	return ret;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/clock-sh4.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/clock-sh4.c
new file mode 100644
index 0000000..99e5ec8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/clock-sh4.c
@@ -0,0 +1,80 @@
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh4.c
+ *
+ * Generic SH-4 support for the clock framework
+ *
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * FRQCR parsing hacked out of arch/sh/kernel/time.c
+ *
+ *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
+ *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
+ *  Copyright (C) 2002, 2003, 2004  Paul Mundt
+ *  Copyright (C) 2002  M. R. Brown  <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 1, 1 };
+#define bfc_divisors ifc_divisors	/* Same */
+static int pfc_divisors[] = { 2, 3, 4, 6, 8, 2, 2, 2 };
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0007];
+}
+
+static struct sh_clk_ops sh4_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static unsigned long module_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(FRQCR) & 0x0007);
+	return clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh4_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static unsigned long bus_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(FRQCR) >> 3) & 0x0007;
+	return clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh4_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static unsigned long cpu_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(FRQCR) >> 6) & 0x0007;
+	return clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct sh_clk_ops sh4_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct sh_clk_ops *sh4_clk_ops[] = {
+	&sh4_master_clk_ops,
+	&sh4_module_clk_ops,
+	&sh4_bus_clk_ops,
+	&sh4_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh4_clk_ops))
+		*ops = sh4_clk_ops[idx];
+}
+
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/fpu.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/fpu.c
new file mode 100644
index 0000000..95fd2dc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/fpu.c
@@ -0,0 +1,428 @@
+/*
+ * Save/restore floating point context for signal handlers.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999, 2000  Kaz Kojima & Niibe Yutaka
+ * Copyright (C) 2006  ST Microelectronics Ltd. (denorm support)
+ *
+ * FIXME! These routines have not been tested for big endian case.
+ */
+#include <linux/sched/signal.h>
+#include <linux/io.h>
+#include <cpu/fpu.h>
+#include <asm/processor.h>
+#include <asm/fpu.h>
+#include <asm/traps.h>
+
+/* The PR (precision) bit in the FP Status Register must be clear when
+ * an frchg instruction is executed, otherwise the instruction is undefined.
+ * Executing frchg with PR set causes a trap on some SH4 implementations.
+ */
+
+#define FPSCR_RCHG 0x00000000
+extern unsigned long long float64_div(unsigned long long a,
+				      unsigned long long b);
+extern unsigned long int float32_div(unsigned long int a, unsigned long int b);
+extern unsigned long long float64_mul(unsigned long long a,
+				      unsigned long long b);
+extern unsigned long int float32_mul(unsigned long int a, unsigned long int b);
+extern unsigned long long float64_add(unsigned long long a,
+				      unsigned long long b);
+extern unsigned long int float32_add(unsigned long int a, unsigned long int b);
+extern unsigned long long float64_sub(unsigned long long a,
+				      unsigned long long b);
+extern unsigned long int float32_sub(unsigned long int a, unsigned long int b);
+extern unsigned long int float64_to_float32(unsigned long long a);
+static unsigned int fpu_exception_flags;
+
+/*
+ * Save FPU registers onto task structure.
+ */
+void save_fpu(struct task_struct *tsk)
+{
+	unsigned long dummy;
+
+	enable_fpu();
+	asm volatile ("sts.l	fpul, @-%0\n\t"
+		      "sts.l	fpscr, @-%0\n\t"
+		      "lds	%2, fpscr\n\t"
+		      "frchg\n\t"
+		      "fmov.s	fr15, @-%0\n\t"
+		      "fmov.s	fr14, @-%0\n\t"
+		      "fmov.s	fr13, @-%0\n\t"
+		      "fmov.s	fr12, @-%0\n\t"
+		      "fmov.s	fr11, @-%0\n\t"
+		      "fmov.s	fr10, @-%0\n\t"
+		      "fmov.s	fr9, @-%0\n\t"
+		      "fmov.s	fr8, @-%0\n\t"
+		      "fmov.s	fr7, @-%0\n\t"
+		      "fmov.s	fr6, @-%0\n\t"
+		      "fmov.s	fr5, @-%0\n\t"
+		      "fmov.s	fr4, @-%0\n\t"
+		      "fmov.s	fr3, @-%0\n\t"
+		      "fmov.s	fr2, @-%0\n\t"
+		      "fmov.s	fr1, @-%0\n\t"
+		      "fmov.s	fr0, @-%0\n\t"
+		      "frchg\n\t"
+		      "fmov.s	fr15, @-%0\n\t"
+		      "fmov.s	fr14, @-%0\n\t"
+		      "fmov.s	fr13, @-%0\n\t"
+		      "fmov.s	fr12, @-%0\n\t"
+		      "fmov.s	fr11, @-%0\n\t"
+		      "fmov.s	fr10, @-%0\n\t"
+		      "fmov.s	fr9, @-%0\n\t"
+		      "fmov.s	fr8, @-%0\n\t"
+		      "fmov.s	fr7, @-%0\n\t"
+		      "fmov.s	fr6, @-%0\n\t"
+		      "fmov.s	fr5, @-%0\n\t"
+		      "fmov.s	fr4, @-%0\n\t"
+		      "fmov.s	fr3, @-%0\n\t"
+		      "fmov.s	fr2, @-%0\n\t"
+		      "fmov.s	fr1, @-%0\n\t"
+		      "fmov.s	fr0, @-%0\n\t"
+		      "lds	%3, fpscr\n\t":"=r" (dummy)
+		      :"0"((char *)(&tsk->thread.xstate->hardfpu.status)),
+		      "r"(FPSCR_RCHG), "r"(FPSCR_INIT)
+		      :"memory");
+
+	disable_fpu();
+}
+
+void restore_fpu(struct task_struct *tsk)
+{
+	unsigned long dummy;
+
+	enable_fpu();
+	asm volatile ("lds	%2, fpscr\n\t"
+		      "fmov.s	@%0+, fr0\n\t"
+		      "fmov.s	@%0+, fr1\n\t"
+		      "fmov.s	@%0+, fr2\n\t"
+		      "fmov.s	@%0+, fr3\n\t"
+		      "fmov.s	@%0+, fr4\n\t"
+		      "fmov.s	@%0+, fr5\n\t"
+		      "fmov.s	@%0+, fr6\n\t"
+		      "fmov.s	@%0+, fr7\n\t"
+		      "fmov.s	@%0+, fr8\n\t"
+		      "fmov.s	@%0+, fr9\n\t"
+		      "fmov.s	@%0+, fr10\n\t"
+		      "fmov.s	@%0+, fr11\n\t"
+		      "fmov.s	@%0+, fr12\n\t"
+		      "fmov.s	@%0+, fr13\n\t"
+		      "fmov.s	@%0+, fr14\n\t"
+		      "fmov.s	@%0+, fr15\n\t"
+		      "frchg\n\t"
+		      "fmov.s	@%0+, fr0\n\t"
+		      "fmov.s	@%0+, fr1\n\t"
+		      "fmov.s	@%0+, fr2\n\t"
+		      "fmov.s	@%0+, fr3\n\t"
+		      "fmov.s	@%0+, fr4\n\t"
+		      "fmov.s	@%0+, fr5\n\t"
+		      "fmov.s	@%0+, fr6\n\t"
+		      "fmov.s	@%0+, fr7\n\t"
+		      "fmov.s	@%0+, fr8\n\t"
+		      "fmov.s	@%0+, fr9\n\t"
+		      "fmov.s	@%0+, fr10\n\t"
+		      "fmov.s	@%0+, fr11\n\t"
+		      "fmov.s	@%0+, fr12\n\t"
+		      "fmov.s	@%0+, fr13\n\t"
+		      "fmov.s	@%0+, fr14\n\t"
+		      "fmov.s	@%0+, fr15\n\t"
+		      "frchg\n\t"
+		      "lds.l	@%0+, fpscr\n\t"
+		      "lds.l	@%0+, fpul\n\t"
+		      :"=r" (dummy)
+		      :"0" (tsk->thread.xstate), "r" (FPSCR_RCHG)
+		      :"memory");
+	disable_fpu();
+}
+
+/**
+ *      denormal_to_double - Given denormalized float number,
+ *                           store double float
+ *
+ *      @fpu: Pointer to sh_fpu_hard structure
+ *      @n: Index to FP register
+ */
+static void denormal_to_double(struct sh_fpu_hard_struct *fpu, int n)
+{
+	unsigned long du, dl;
+	unsigned long x = fpu->fpul;
+	int exp = 1023 - 126;
+
+	if (x != 0 && (x & 0x7f800000) == 0) {
+		du = (x & 0x80000000);
+		while ((x & 0x00800000) == 0) {
+			x <<= 1;
+			exp--;
+		}
+		x &= 0x007fffff;
+		du |= (exp << 20) | (x >> 3);
+		dl = x << 29;
+
+		fpu->fp_regs[n] = du;
+		fpu->fp_regs[n + 1] = dl;
+	}
+}
+
+/**
+ *	ieee_fpe_handler - Handle denormalized number exception
+ *
+ *	@regs: Pointer to register structure
+ *
+ *	Returns 1 when it's handled (should not cause exception).
+ */
+static int ieee_fpe_handler(struct pt_regs *regs)
+{
+	unsigned short insn = *(unsigned short *)regs->pc;
+	unsigned short finsn;
+	unsigned long nextpc;
+	int nib[4] = {
+		(insn >> 12) & 0xf,
+		(insn >> 8) & 0xf,
+		(insn >> 4) & 0xf,
+		insn & 0xf
+	};
+
+	if (nib[0] == 0xb || (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb))
+		regs->pr = regs->pc + 4;  /* bsr & jsr */
+
+	if (nib[0] == 0xa || nib[0] == 0xb) {
+		/* bra & bsr */
+		nextpc = regs->pc + 4 + ((short)((insn & 0xfff) << 4) >> 3);
+		finsn = *(unsigned short *)(regs->pc + 2);
+	} else if (nib[0] == 0x8 && nib[1] == 0xd) {
+		/* bt/s */
+		if (regs->sr & 1)
+			nextpc = regs->pc + 4 + ((char)(insn & 0xff) << 1);
+		else
+			nextpc = regs->pc + 4;
+		finsn = *(unsigned short *)(regs->pc + 2);
+	} else if (nib[0] == 0x8 && nib[1] == 0xf) {
+		/* bf/s */
+		if (regs->sr & 1)
+			nextpc = regs->pc + 4;
+		else
+			nextpc = regs->pc + 4 + ((char)(insn & 0xff) << 1);
+		finsn = *(unsigned short *)(regs->pc + 2);
+	} else if (nib[0] == 0x4 && nib[3] == 0xb &&
+		   (nib[2] == 0x0 || nib[2] == 0x2)) {
+		/* jmp & jsr */
+		nextpc = regs->regs[nib[1]];
+		finsn = *(unsigned short *)(regs->pc + 2);
+	} else if (nib[0] == 0x0 && nib[3] == 0x3 &&
+		   (nib[2] == 0x0 || nib[2] == 0x2)) {
+		/* braf & bsrf */
+		nextpc = regs->pc + 4 + regs->regs[nib[1]];
+		finsn = *(unsigned short *)(regs->pc + 2);
+	} else if (insn == 0x000b) {
+		/* rts */
+		nextpc = regs->pr;
+		finsn = *(unsigned short *)(regs->pc + 2);
+	} else {
+		nextpc = regs->pc + instruction_size(insn);
+		finsn = insn;
+	}
+
+	if ((finsn & 0xf1ff) == 0xf0ad) {
+		/* fcnvsd */
+		struct task_struct *tsk = current;
+
+		if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_CAUSE_ERROR))
+			/* FPU error */
+			denormal_to_double(&tsk->thread.xstate->hardfpu,
+					   (finsn >> 8) & 0xf);
+		else
+			return 0;
+
+		regs->pc = nextpc;
+		return 1;
+	} else if ((finsn & 0xf00f) == 0xf002) {
+		/* fmul */
+		struct task_struct *tsk = current;
+		int fpscr;
+		int n, m, prec;
+		unsigned int hx, hy;
+
+		n = (finsn >> 8) & 0xf;
+		m = (finsn >> 4) & 0xf;
+		hx = tsk->thread.xstate->hardfpu.fp_regs[n];
+		hy = tsk->thread.xstate->hardfpu.fp_regs[m];
+		fpscr = tsk->thread.xstate->hardfpu.fpscr;
+		prec = fpscr & FPSCR_DBL_PRECISION;
+
+		if ((fpscr & FPSCR_CAUSE_ERROR)
+		    && (prec && ((hx & 0x7fffffff) < 0x00100000
+				 || (hy & 0x7fffffff) < 0x00100000))) {
+			long long llx, lly;
+
+			/* FPU error because of denormal (doubles) */
+			llx = ((long long)hx << 32)
+			    | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
+			lly = ((long long)hy << 32)
+			    | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
+			llx = float64_mul(llx, lly);
+			tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
+			tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
+		} else if ((fpscr & FPSCR_CAUSE_ERROR)
+			   && (!prec && ((hx & 0x7fffffff) < 0x00800000
+					 || (hy & 0x7fffffff) < 0x00800000))) {
+			/* FPU error because of denormal (floats) */
+			hx = float32_mul(hx, hy);
+			tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
+		} else
+			return 0;
+
+		regs->pc = nextpc;
+		return 1;
+	} else if ((finsn & 0xf00e) == 0xf000) {
+		/* fadd, fsub */
+		struct task_struct *tsk = current;
+		int fpscr;
+		int n, m, prec;
+		unsigned int hx, hy;
+
+		n = (finsn >> 8) & 0xf;
+		m = (finsn >> 4) & 0xf;
+		hx = tsk->thread.xstate->hardfpu.fp_regs[n];
+		hy = tsk->thread.xstate->hardfpu.fp_regs[m];
+		fpscr = tsk->thread.xstate->hardfpu.fpscr;
+		prec = fpscr & FPSCR_DBL_PRECISION;
+
+		if ((fpscr & FPSCR_CAUSE_ERROR)
+		    && (prec && ((hx & 0x7fffffff) < 0x00100000
+				 || (hy & 0x7fffffff) < 0x00100000))) {
+			long long llx, lly;
+
+			/* FPU error because of denormal (doubles) */
+			llx = ((long long)hx << 32)
+			    | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
+			lly = ((long long)hy << 32)
+			    | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
+			if ((finsn & 0xf00f) == 0xf000)
+				llx = float64_add(llx, lly);
+			else
+				llx = float64_sub(llx, lly);
+			tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
+			tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
+		} else if ((fpscr & FPSCR_CAUSE_ERROR)
+			   && (!prec && ((hx & 0x7fffffff) < 0x00800000
+					 || (hy & 0x7fffffff) < 0x00800000))) {
+			/* FPU error because of denormal (floats) */
+			if ((finsn & 0xf00f) == 0xf000)
+				hx = float32_add(hx, hy);
+			else
+				hx = float32_sub(hx, hy);
+			tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
+		} else
+			return 0;
+
+		regs->pc = nextpc;
+		return 1;
+	} else if ((finsn & 0xf003) == 0xf003) {
+		/* fdiv */
+		struct task_struct *tsk = current;
+		int fpscr;
+		int n, m, prec;
+		unsigned int hx, hy;
+
+		n = (finsn >> 8) & 0xf;
+		m = (finsn >> 4) & 0xf;
+		hx = tsk->thread.xstate->hardfpu.fp_regs[n];
+		hy = tsk->thread.xstate->hardfpu.fp_regs[m];
+		fpscr = tsk->thread.xstate->hardfpu.fpscr;
+		prec = fpscr & FPSCR_DBL_PRECISION;
+
+		if ((fpscr & FPSCR_CAUSE_ERROR)
+		    && (prec && ((hx & 0x7fffffff) < 0x00100000
+				 || (hy & 0x7fffffff) < 0x00100000))) {
+			long long llx, lly;
+
+			/* FPU error because of denormal (doubles) */
+			llx = ((long long)hx << 32)
+			    | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
+			lly = ((long long)hy << 32)
+			    | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
+
+			llx = float64_div(llx, lly);
+
+			tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
+			tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
+		} else if ((fpscr & FPSCR_CAUSE_ERROR)
+			   && (!prec && ((hx & 0x7fffffff) < 0x00800000
+					 || (hy & 0x7fffffff) < 0x00800000))) {
+			/* FPU error because of denormal (floats) */
+			hx = float32_div(hx, hy);
+			tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
+		} else
+			return 0;
+
+		regs->pc = nextpc;
+		return 1;
+	} else if ((finsn & 0xf0bd) == 0xf0bd) {
+		/* fcnvds - double to single precision convert */
+		struct task_struct *tsk = current;
+		int m;
+		unsigned int hx;
+
+		m = (finsn >> 8) & 0x7;
+		hx = tsk->thread.xstate->hardfpu.fp_regs[m];
+
+		if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_CAUSE_ERROR)
+			&& ((hx & 0x7fffffff) < 0x00100000)) {
+			/* subnormal double to float conversion */
+			long long llx;
+
+			llx = ((long long)tsk->thread.xstate->hardfpu.fp_regs[m] << 32)
+			    | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
+
+			tsk->thread.xstate->hardfpu.fpul = float64_to_float32(llx);
+		} else
+			return 0;
+
+		regs->pc = nextpc;
+		return 1;
+	}
+
+	return 0;
+}
+
+void float_raise(unsigned int flags)
+{
+	fpu_exception_flags |= flags;
+}
+
+int float_rounding_mode(void)
+{
+	struct task_struct *tsk = current;
+	int roundingMode = FPSCR_ROUNDING_MODE(tsk->thread.xstate->hardfpu.fpscr);
+	return roundingMode;
+}
+
+BUILD_TRAP_HANDLER(fpu_error)
+{
+	struct task_struct *tsk = current;
+	TRAP_HANDLER_DECL;
+
+	__unlazy_fpu(tsk, regs);
+	fpu_exception_flags = 0;
+	if (ieee_fpe_handler(regs)) {
+		tsk->thread.xstate->hardfpu.fpscr &=
+		    ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
+		tsk->thread.xstate->hardfpu.fpscr |= fpu_exception_flags;
+		/* Set the FPSCR flag as well as cause bits - simply
+		 * replicate the cause */
+		tsk->thread.xstate->hardfpu.fpscr |= (fpu_exception_flags >> 10);
+		grab_fpu(regs);
+		restore_fpu(tsk);
+		task_thread_info(tsk)->status |= TS_USEDFPU;
+		if ((((tsk->thread.xstate->hardfpu.fpscr & FPSCR_ENABLE_MASK) >> 7) &
+		     (fpu_exception_flags >> 2)) == 0) {
+			return;
+		}
+	}
+
+	force_sig(SIGFPE, tsk);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/perf_event.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/perf_event.c
new file mode 100644
index 0000000..fa4f724
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/perf_event.c
@@ -0,0 +1,268 @@
+/*
+ * Performance events support for SH7750-style performance counters
+ *
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/perf_event.h>
+#include <asm/processor.h>
+
+#define PM_CR_BASE	0xff000084	/* 16-bit */
+#define PM_CTR_BASE	0xff100004	/* 32-bit */
+
+#define PMCR(n)		(PM_CR_BASE + ((n) * 0x04))
+#define PMCTRH(n)	(PM_CTR_BASE + 0x00 + ((n) * 0x08))
+#define PMCTRL(n)	(PM_CTR_BASE + 0x04 + ((n) * 0x08))
+
+#define PMCR_PMM_MASK	0x0000003f
+
+#define PMCR_CLKF	0x00000100
+#define PMCR_PMCLR	0x00002000
+#define PMCR_PMST	0x00004000
+#define PMCR_PMEN	0x00008000
+
+static struct sh_pmu sh7750_pmu;
+
+/*
+ * There are a number of events supported by each counter (33 in total).
+ * Since we have 2 counters, each counter will take the event code as it
+ * corresponds to the PMCR PMM setting. Each counter can be configured
+ * independently.
+ *
+ *	Event Code	Description
+ *	----------	-----------
+ *
+ *	0x01		Operand read access
+ *	0x02		Operand write access
+ *	0x03		UTLB miss
+ *	0x04		Operand cache read miss
+ *	0x05		Operand cache write miss
+ *	0x06		Instruction fetch (w/ cache)
+ *	0x07		Instruction TLB miss
+ *	0x08		Instruction cache miss
+ *	0x09		All operand accesses
+ *	0x0a		All instruction accesses
+ *	0x0b		OC RAM operand access
+ *	0x0d		On-chip I/O space access
+ *	0x0e		Operand access (r/w)
+ *	0x0f		Operand cache miss (r/w)
+ *	0x10		Branch instruction
+ *	0x11		Branch taken
+ *	0x12		BSR/BSRF/JSR
+ *	0x13		Instruction execution
+ *	0x14		Instruction execution in parallel
+ *	0x15		FPU Instruction execution
+ *	0x16		Interrupt
+ *	0x17		NMI
+ *	0x18		trapa instruction execution
+ *	0x19		UBCA match
+ *	0x1a		UBCB match
+ *	0x21		Instruction cache fill
+ *	0x22		Operand cache fill
+ *	0x23		Elapsed time
+ *	0x24		Pipeline freeze by I-cache miss
+ *	0x25		Pipeline freeze by D-cache miss
+ *	0x27		Pipeline freeze by branch instruction
+ *	0x28		Pipeline freeze by CPU register
+ *	0x29		Pipeline freeze by FPU
+ */
+
+static const int sh7750_general_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES]		= 0x0023,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= 0x000a,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0006,	/* I-cache */
+	[PERF_COUNT_HW_CACHE_MISSES]		= 0x0008,	/* I-cache */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x0010,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= -1,
+	[PERF_COUNT_HW_BUS_CYCLES]		= -1,
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+static const int sh7750_cache_events
+			[PERF_COUNT_HW_CACHE_MAX]
+			[PERF_COUNT_HW_CACHE_OP_MAX]
+			[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+	[ C(L1D) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0001,
+			[ C(RESULT_MISS)   ] = 0x0004,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0002,
+			[ C(RESULT_MISS)   ] = 0x0005,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+	},
+
+	[ C(L1I) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0006,
+			[ C(RESULT_MISS)   ] = 0x0008,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+	},
+
+	[ C(LL) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+	},
+
+	[ C(DTLB) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0x0003,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+	},
+
+	[ C(ITLB) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0x0007,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+	},
+
+	[ C(BPU) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+	},
+
+	[ C(NODE) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+	},
+};
+
+static int sh7750_event_map(int event)
+{
+	return sh7750_general_events[event];
+}
+
+static u64 sh7750_pmu_read(int idx)
+{
+	return (u64)((u64)(__raw_readl(PMCTRH(idx)) & 0xffff) << 32) |
+			   __raw_readl(PMCTRL(idx));
+}
+
+static void sh7750_pmu_disable(struct hw_perf_event *hwc, int idx)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readw(PMCR(idx));
+	tmp &= ~(PMCR_PMM_MASK | PMCR_PMEN);
+	__raw_writew(tmp, PMCR(idx));
+}
+
+static void sh7750_pmu_enable(struct hw_perf_event *hwc, int idx)
+{
+	__raw_writew(__raw_readw(PMCR(idx)) | PMCR_PMCLR, PMCR(idx));
+	__raw_writew(hwc->config | PMCR_PMEN | PMCR_PMST, PMCR(idx));
+}
+
+static void sh7750_pmu_disable_all(void)
+{
+	int i;
+
+	for (i = 0; i < sh7750_pmu.num_events; i++)
+		__raw_writew(__raw_readw(PMCR(i)) & ~PMCR_PMEN, PMCR(i));
+}
+
+static void sh7750_pmu_enable_all(void)
+{
+	int i;
+
+	for (i = 0; i < sh7750_pmu.num_events; i++)
+		__raw_writew(__raw_readw(PMCR(i)) | PMCR_PMEN, PMCR(i));
+}
+
+static struct sh_pmu sh7750_pmu = {
+	.name		= "sh7750",
+	.num_events	= 2,
+	.event_map	= sh7750_event_map,
+	.max_events	= ARRAY_SIZE(sh7750_general_events),
+	.raw_event_mask	= PMCR_PMM_MASK,
+	.cache_events	= &sh7750_cache_events,
+	.read		= sh7750_pmu_read,
+	.disable	= sh7750_pmu_disable,
+	.enable		= sh7750_pmu_enable,
+	.disable_all	= sh7750_pmu_disable_all,
+	.enable_all	= sh7750_pmu_enable_all,
+};
+
+static int __init sh7750_pmu_init(void)
+{
+	/*
+	 * Make sure this CPU actually has perf counters.
+	 */
+	if (!(boot_cpu_data.flags & CPU_HAS_PERF_COUNTER)) {
+		pr_notice("HW perf events unsupported, software events only.\n");
+		return -ENODEV;
+	}
+
+	return register_sh_pmu(&sh7750_pmu);
+}
+early_initcall(sh7750_pmu_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/probe.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/probe.c
new file mode 100644
index 0000000..a521bcf
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/probe.c
@@ -0,0 +1,263 @@
+/*
+ * arch/sh/kernel/cpu/sh4/probe.c
+ *
+ * CPU Subtype Probing for SH-4.
+ *
+ * Copyright (C) 2001 - 2007  Paul Mundt
+ * Copyright (C) 2003  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+
+void cpu_probe(void)
+{
+	unsigned long pvr, prr, cvr;
+	unsigned long size;
+
+	static unsigned long sizes[16] = {
+		[1] = (1 << 12),
+		[2] = (1 << 13),
+		[4] = (1 << 14),
+		[8] = (1 << 15),
+		[9] = (1 << 16)
+	};
+
+	pvr = (__raw_readl(CCN_PVR) >> 8) & 0xffffff;
+	prr = (__raw_readl(CCN_PRR) >> 4) & 0xff;
+	cvr = (__raw_readl(CCN_CVR));
+
+	/*
+	 * Setup some sane SH-4 defaults for the icache
+	 */
+	boot_cpu_data.icache.way_incr		= (1 << 13);
+	boot_cpu_data.icache.entry_shift	= 5;
+	boot_cpu_data.icache.sets		= 256;
+	boot_cpu_data.icache.ways		= 1;
+	boot_cpu_data.icache.linesz		= L1_CACHE_BYTES;
+
+	/*
+	 * And again for the dcache ..
+	 */
+	boot_cpu_data.dcache.way_incr		= (1 << 14);
+	boot_cpu_data.dcache.entry_shift	= 5;
+	boot_cpu_data.dcache.sets		= 512;
+	boot_cpu_data.dcache.ways		= 1;
+	boot_cpu_data.dcache.linesz		= L1_CACHE_BYTES;
+
+	/* We don't know the chip cut */
+	boot_cpu_data.cut_major = boot_cpu_data.cut_minor = -1;
+
+	/*
+	 * Setup some generic flags we can probe on SH-4A parts
+	 */
+	if (((pvr >> 16) & 0xff) == 0x10) {
+		boot_cpu_data.family = CPU_FAMILY_SH4A;
+
+		if ((cvr & 0x10000000) == 0) {
+			boot_cpu_data.flags |= CPU_HAS_DSP;
+			boot_cpu_data.family = CPU_FAMILY_SH4AL_DSP;
+		}
+
+		boot_cpu_data.flags |= CPU_HAS_LLSC | CPU_HAS_PERF_COUNTER;
+		boot_cpu_data.cut_major = pvr & 0x7f;
+
+		boot_cpu_data.icache.ways = 4;
+		boot_cpu_data.dcache.ways = 4;
+	} else {
+		/* And some SH-4 defaults.. */
+		boot_cpu_data.flags |= CPU_HAS_PTEA | CPU_HAS_FPU;
+		boot_cpu_data.family = CPU_FAMILY_SH4;
+	}
+
+	/* FPU detection works for almost everyone */
+	if ((cvr & 0x20000000))
+		boot_cpu_data.flags |= CPU_HAS_FPU;
+
+	/* Mask off the upper chip ID */
+	pvr &= 0xffff;
+
+	/*
+	 * Probe the underlying processor version/revision and
+	 * adjust cpu_data setup accordingly.
+	 */
+	switch (pvr) {
+	case 0x205:
+		boot_cpu_data.type = CPU_SH7750;
+		boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG |
+				       CPU_HAS_PERF_COUNTER;
+		break;
+	case 0x206:
+		boot_cpu_data.type = CPU_SH7750S;
+		boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG |
+				       CPU_HAS_PERF_COUNTER;
+		break;
+	case 0x1100:
+		boot_cpu_data.type = CPU_SH7751;
+		break;
+	case 0x2001:
+	case 0x2004:
+		boot_cpu_data.type = CPU_SH7770;
+		break;
+	case 0x2006:
+	case 0x200A:
+		if (prr == 0x61)
+			boot_cpu_data.type = CPU_SH7781;
+		else if (prr == 0xa1)
+			boot_cpu_data.type = CPU_SH7763;
+		else
+			boot_cpu_data.type = CPU_SH7780;
+
+		break;
+	case 0x3000:
+	case 0x3003:
+	case 0x3009:
+		boot_cpu_data.type = CPU_SH7343;
+		break;
+	case 0x3004:
+	case 0x3007:
+		boot_cpu_data.type = CPU_SH7785;
+		break;
+	case 0x4004:
+	case 0x4005:
+		boot_cpu_data.type = CPU_SH7786;
+		boot_cpu_data.flags |= CPU_HAS_PTEAEX | CPU_HAS_L2_CACHE;
+		break;
+	case 0x3008:
+		switch (prr) {
+		case 0x50:
+		case 0x51:
+			boot_cpu_data.type = CPU_SH7723;
+			boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
+			break;
+		case 0x70:
+			boot_cpu_data.type = CPU_SH7366;
+			break;
+		case 0xa0:
+		case 0xa1:
+			boot_cpu_data.type = CPU_SH7722;
+			break;
+		}
+		break;
+	case 0x300b:
+		switch (prr) {
+		case 0x20:
+			boot_cpu_data.type = CPU_SH7724;
+			boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
+			break;
+		case 0x10:
+		case 0x11:
+			boot_cpu_data.type = CPU_SH7757;
+			break;
+		case 0xd0:
+		case 0x40: /* yon-ten-go */
+			boot_cpu_data.type = CPU_SH7372;
+			break;
+		case 0xE0: /* 0x4E0 */
+			boot_cpu_data.type = CPU_SH7734; /* SH7733/SH7734 */
+			break;
+
+		}
+		break;
+	case 0x4000:	/* 1st cut */
+	case 0x4001:	/* 2nd cut */
+		boot_cpu_data.type = CPU_SHX3;
+		break;
+	case 0x700:
+		boot_cpu_data.type = CPU_SH4_501;
+		boot_cpu_data.flags &= ~CPU_HAS_FPU;
+		boot_cpu_data.icache.ways = 2;
+		boot_cpu_data.dcache.ways = 2;
+		break;
+	case 0x600:
+		boot_cpu_data.type = CPU_SH4_202;
+		boot_cpu_data.icache.ways = 2;
+		boot_cpu_data.dcache.ways = 2;
+		break;
+	case 0x500 ... 0x501:
+		switch (prr) {
+		case 0x10:
+			boot_cpu_data.type = CPU_SH7750R;
+			break;
+		case 0x11:
+			boot_cpu_data.type = CPU_SH7751R;
+			break;
+		case 0x50 ... 0x5f:
+			boot_cpu_data.type = CPU_SH7760;
+			break;
+		}
+
+		boot_cpu_data.icache.ways = 2;
+		boot_cpu_data.dcache.ways = 2;
+
+		break;
+	}
+
+	/*
+	 * On anything that's not a direct-mapped cache, look to the CVR
+	 * for I/D-cache specifics.
+	 */
+	if (boot_cpu_data.icache.ways > 1) {
+		size = sizes[(cvr >> 20) & 0xf];
+		boot_cpu_data.icache.way_incr	= (size >> 1);
+		boot_cpu_data.icache.sets	= (size >> 6);
+
+	}
+
+	/* And the rest of the D-cache */
+	if (boot_cpu_data.dcache.ways > 1) {
+		size = sizes[(cvr >> 16) & 0xf];
+		boot_cpu_data.dcache.way_incr	= (size >> 1);
+		boot_cpu_data.dcache.sets	= (size >> 6);
+	}
+
+	/*
+	 * SH-4A's have an optional PIPT L2.
+	 */
+	if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
+		/*
+		 * Verify that it really has something hooked up, this
+		 * is the safety net for CPUs that have optional L2
+		 * support yet do not implement it.
+		 */
+		if ((cvr & 0xf) == 0)
+			boot_cpu_data.flags &= ~CPU_HAS_L2_CACHE;
+		else {
+			/*
+			 * Silicon and specifications have clearly never
+			 * met..
+			 */
+			cvr ^= 0xf;
+
+			/*
+			 * Size calculation is much more sensible
+			 * than it is for the L1.
+			 *
+			 * Sizes are 128KB, 256KB, 512KB, and 1MB.
+			 */
+			size = (cvr & 0xf) << 17;
+
+			boot_cpu_data.scache.way_incr		= (1 << 16);
+			boot_cpu_data.scache.entry_shift	= 5;
+			boot_cpu_data.scache.ways		= 4;
+			boot_cpu_data.scache.linesz		= L1_CACHE_BYTES;
+
+			boot_cpu_data.scache.entry_mask	=
+				(boot_cpu_data.scache.way_incr -
+				 boot_cpu_data.scache.linesz);
+
+			boot_cpu_data.scache.sets	= size /
+				(boot_cpu_data.scache.linesz *
+				 boot_cpu_data.scache.ways);
+
+			boot_cpu_data.scache.way_size	=
+				(boot_cpu_data.scache.sets *
+				 boot_cpu_data.scache.linesz);
+		}
+	}
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
new file mode 100644
index 0000000..2623f82
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
@@ -0,0 +1,141 @@
+/*
+ * SH4-202 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2009  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <linux/io.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe80000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x700)),
+	DEFINE_RES_IRQ(evt2irq(0x720)),
+	DEFINE_RES_IRQ(evt2irq(0x760)),
+	DEFINE_RES_IRQ(evt2irq(0x740)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80000, 0x30),
+	DEFINE_RES_IRQ(evt2irq(0x400)),
+	DEFINE_RES_IRQ(evt2irq(0x420)),
+	DEFINE_RES_IRQ(evt2irq(0x440)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct platform_device *sh4202_devices[] __initdata = {
+	&scif0_device,
+	&tmu0_device,
+};
+
+static int __init sh4202_devices_setup(void)
+{
+	return platform_add_devices(sh4202_devices,
+				    ARRAY_SIZE(sh4202_devices));
+}
+arch_initcall(sh4202_devices_setup);
+
+static struct platform_device *sh4202_early_devices[] __initdata = {
+	&scif0_device,
+	&tmu0_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh4202_early_devices,
+				   ARRAY_SIZE(sh4202_early_devices));
+}
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */
+	HUDI, TMU0, TMU1, TMU2, RTC, SCIF, WDT,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(HUDI, 0x600),
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
+	INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+	INTC_VECT(RTC, 0x4c0),
+	INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720),
+	INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760),
+	INTC_VECT(WDT, 0x560),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
+	{ 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, 0, 0, 0 } },
+	{ 0xffd0000c, 0, 16, 4, /* IPRC */ { 0, 0, SCIF, HUDI } },
+	{ 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh4-202", vectors, NULL,
+			 NULL, prio_registers, NULL);
+
+static struct intc_vect vectors_irlm[] __initdata = {
+	INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
+	INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irlm, "sh4-202_irlm", vectors_irlm, NULL,
+			 NULL, prio_registers, NULL);
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
+
+#define INTC_ICR	0xffd00000UL
+#define INTC_ICR_IRLM   (1<<7)
+
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
+		__raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+		register_intc_controller(&intc_desc_irlm);
+		break;
+	default:
+		BUG();
+	}
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/setup-sh7750.c
new file mode 100644
index 0000000..57d3068
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -0,0 +1,361 @@
+/*
+ * SH7091/SH7750/SH7750S/SH7750R/SH7751/SH7751R Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2006  Jamie Lenehan
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <linux/serial_sci.h>
+#include <generated/machtypes.h>
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xffc80000,
+		.end	= 0xffc80000 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Shared Period/Carry/Alarm IRQ */
+		.start	= evt2irq(0x480),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+static struct plat_sci_port sci_platform_data = {
+	.type		= PORT_SCI,
+};
+
+static struct resource sci_resources[] = {
+	DEFINE_RES_MEM(0xffe00000, 0x20),
+	DEFINE_RES_IRQ(evt2irq(0x4e0)),
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= sci_resources,
+	.num_resources	= ARRAY_SIZE(sci_resources),
+	.dev		= {
+		.platform_data	= &sci_platform_data,
+	},
+};
+
+static struct plat_sci_port scif_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif_resources[] = {
+	DEFINE_RES_MEM(0xffe80000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x700)),
+};
+
+static struct platform_device scif_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif_resources,
+	.num_resources	= ARRAY_SIZE(scif_resources),
+	.dev		= {
+		.platform_data	= &scif_platform_data,
+	},
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80000, 0x30),
+	DEFINE_RES_IRQ(evt2irq(0x400)),
+	DEFINE_RES_IRQ(evt2irq(0x420)),
+	DEFINE_RES_IRQ(evt2irq(0x440)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+/* SH7750R, SH7751 and SH7751R all have two extra timer channels */
+#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7751R)
+
+static struct sh_timer_config tmu1_platform_data = {
+	.channels_mask = 3,
+};
+
+static struct resource tmu1_resources[] = {
+	DEFINE_RES_MEM(0xfe100000, 0x20),
+	DEFINE_RES_IRQ(evt2irq(0xb00)),
+	DEFINE_RES_IRQ(evt2irq(0xb80)),
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh-tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+#endif
+
+static struct platform_device *sh7750_devices[] __initdata = {
+	&rtc_device,
+	&tmu0_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7751R)
+	&tmu1_device,
+#endif
+};
+
+static int __init sh7750_devices_setup(void)
+{
+	if (mach_is_rts7751r2d()) {
+		platform_device_register(&scif_device);
+	} else {
+		platform_device_register(&sci_device);
+		platform_device_register(&scif_device);
+	}
+
+	return platform_add_devices(sh7750_devices,
+				    ARRAY_SIZE(sh7750_devices));
+}
+arch_initcall(sh7750_devices_setup);
+
+static struct platform_device *sh7750_early_devices[] __initdata = {
+	&tmu0_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7751R)
+	&tmu1_device,
+#endif
+};
+
+void __init plat_early_device_setup(void)
+{
+	struct platform_device *dev[1];
+
+	if (mach_is_rts7751r2d()) {
+		scif_platform_data.scscr |= SCSCR_CKE1;
+		dev[0] = &scif_device;
+		early_platform_add_devices(dev, 1);
+	} else {
+		dev[0] = &sci_device;
+		early_platform_add_devices(dev, 1);
+		dev[0] = &scif_device;
+		early_platform_add_devices(dev, 1);
+	}
+
+	early_platform_add_devices(sh7750_early_devices,
+				   ARRAY_SIZE(sh7750_early_devices));
+}
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */
+	HUDI, GPIOI, DMAC,
+	PCIC0_PCISERR, PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON,
+	PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2, PCIC1_PCIDMA3,
+	TMU3, TMU4, TMU0, TMU1, TMU2, RTC, SCI1, SCIF, WDT, REF,
+
+	/* interrupt groups */
+	PCIC1,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620),
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
+	INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+	INTC_VECT(RTC, 0x4c0),
+	INTC_VECT(SCI1, 0x4e0), INTC_VECT(SCI1, 0x500),
+	INTC_VECT(SCI1, 0x520), INTC_VECT(SCI1, 0x540),
+	INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720),
+	INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760),
+	INTC_VECT(WDT, 0x560),
+	INTC_VECT(REF, 0x580), INTC_VECT(REF, 0x5a0),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
+	{ 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, REF, SCI1, 0 } },
+	{ 0xffd0000c, 0, 16, 4, /* IPRC */ { GPIOI, DMAC, SCIF, HUDI } },
+	{ 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
+	{ 0xfe080000, 0, 32, 4, /* INTPRI00 */ { 0, 0, 0, 0,
+						 TMU4, TMU3,
+						 PCIC1, PCIC0_PCISERR } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, NULL,
+			 NULL, prio_registers, NULL);
+
+/* SH7750, SH7750S, SH7751 and SH7091 all have 4-channel DMA controllers */
+#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7091)
+static struct intc_vect vectors_dma4[] __initdata = {
+	INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
+	INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
+	INTC_VECT(DMAC, 0x6c0),
+};
+
+static DECLARE_INTC_DESC(intc_desc_dma4, "sh7750_dma4",
+			 vectors_dma4, NULL,
+			 NULL, prio_registers, NULL);
+#endif
+
+/* SH7750R and SH7751R both have 8-channel DMA controllers */
+#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || defined(CONFIG_CPU_SUBTYPE_SH7751R)
+static struct intc_vect vectors_dma8[] __initdata = {
+	INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
+	INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
+	INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
+	INTC_VECT(DMAC, 0x7c0), INTC_VECT(DMAC, 0x7e0),
+	INTC_VECT(DMAC, 0x6c0),
+};
+
+static DECLARE_INTC_DESC(intc_desc_dma8, "sh7750_dma8",
+			 vectors_dma8, NULL,
+			 NULL, prio_registers, NULL);
+#endif
+
+/* SH7750R, SH7751 and SH7751R all have two extra timer channels */
+#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7751R)
+static struct intc_vect vectors_tmu34[] __initdata = {
+	INTC_VECT(TMU3, 0xb00), INTC_VECT(TMU4, 0xb80),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xfe080040, 0xfe080060, 32, /* INTMSK00 / INTMSKCLR00 */
+	  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, 0, 0, 0, 0, 0, TMU4, TMU3,
+	    PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON,
+	    PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2,
+	    PCIC1_PCIDMA3, PCIC0_PCISERR } },
+};
+
+static DECLARE_INTC_DESC(intc_desc_tmu34, "sh7750_tmu34",
+			 vectors_tmu34, NULL,
+			 mask_registers, prio_registers, NULL);
+#endif
+
+/* SH7750S, SH7750R, SH7751 and SH7751R all have IRLM priority registers */
+static struct intc_vect vectors_irlm[] __initdata = {
+	INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
+	INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irlm, "sh7750_irlm", vectors_irlm, NULL,
+			 NULL, prio_registers, NULL);
+
+/* SH7751 and SH7751R both have PCI */
+#if defined(CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_SH7751R)
+static struct intc_vect vectors_pci[] __initdata = {
+	INTC_VECT(PCIC0_PCISERR, 0xa00), INTC_VECT(PCIC1_PCIERR, 0xae0),
+	INTC_VECT(PCIC1_PCIPWDWN, 0xac0), INTC_VECT(PCIC1_PCIPWON, 0xaa0),
+	INTC_VECT(PCIC1_PCIDMA0, 0xa80), INTC_VECT(PCIC1_PCIDMA1, 0xa60),
+	INTC_VECT(PCIC1_PCIDMA2, 0xa40), INTC_VECT(PCIC1_PCIDMA3, 0xa20),
+};
+
+static struct intc_group groups_pci[] __initdata = {
+	INTC_GROUP(PCIC1, PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON,
+		   PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2, PCIC1_PCIDMA3),
+};
+
+static DECLARE_INTC_DESC(intc_desc_pci, "sh7750_pci", vectors_pci, groups_pci,
+			 mask_registers, prio_registers, NULL);
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7091)
+void __init plat_irq_setup(void)
+{
+	/*
+	 * same vectors for SH7750, SH7750S and SH7091 except for IRLM,
+	 * see below..
+	 */
+	register_intc_controller(&intc_desc);
+	register_intc_controller(&intc_desc_dma4);
+}
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7750R)
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+	register_intc_controller(&intc_desc_dma8);
+	register_intc_controller(&intc_desc_tmu34);
+}
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7751)
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+	register_intc_controller(&intc_desc_dma4);
+	register_intc_controller(&intc_desc_tmu34);
+	register_intc_controller(&intc_desc_pci);
+}
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7751R)
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+	register_intc_controller(&intc_desc_dma8);
+	register_intc_controller(&intc_desc_tmu34);
+	register_intc_controller(&intc_desc_pci);
+}
+#endif
+
+#define INTC_ICR	0xffd00000UL
+#define INTC_ICR_IRLM   (1<<7)
+
+void __init plat_irq_setup_pins(int mode)
+{
+#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7091)
+	BUG(); /* impossible to mask interrupts on SH7750 and SH7091 */
+	return;
+#endif
+
+	switch (mode) {
+	case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
+		__raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+		register_intc_controller(&intc_desc_irlm);
+		break;
+	default:
+		BUG();
+	}
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/setup-sh7760.c
new file mode 100644
index 0000000..e51fe17
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -0,0 +1,299 @@
+/*
+ * SH7760 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <linux/serial_sci.h>
+#include <linux/io.h>
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRL0, IRL1, IRL2, IRL3,
+	HUDI, GPIOI, DMAC,
+	IRQ4, IRQ5, IRQ6, IRQ7,
+	HCAN20, HCAN21,
+	SSI0, SSI1,
+	HAC0, HAC1,
+	I2C0, I2C1,
+	USB, LCDC,
+	DMABRG0, DMABRG1, DMABRG2,
+	SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
+	SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
+	SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
+	SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
+	HSPI,
+	MMCIF0, MMCIF1, MMCIF2, MMCIF3,
+	MFI, ADC, CMT,
+	TMU0, TMU1, TMU2,
+	WDT, REF,
+
+	/* interrupt groups */
+	DMABRG, SCIF0, SCIF1, SCIF2, SIM, MMCIF,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620),
+	INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
+	INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
+	INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
+	INTC_VECT(DMAC, 0x7c0), INTC_VECT(DMAC, 0x7e0),
+	INTC_VECT(DMAC, 0x6c0),
+	INTC_VECT(IRQ4, 0x800), INTC_VECT(IRQ5, 0x820),
+	INTC_VECT(IRQ6, 0x840), INTC_VECT(IRQ6, 0x860),
+	INTC_VECT(HCAN20, 0x900), INTC_VECT(HCAN21, 0x920),
+	INTC_VECT(SSI0, 0x940), INTC_VECT(SSI1, 0x960),
+	INTC_VECT(HAC0, 0x980), INTC_VECT(HAC1, 0x9a0),
+	INTC_VECT(I2C0, 0x9c0), INTC_VECT(I2C1, 0x9e0),
+	INTC_VECT(USB, 0xa00), INTC_VECT(LCDC, 0xa20),
+	INTC_VECT(DMABRG0, 0xa80), INTC_VECT(DMABRG1, 0xaa0),
+	INTC_VECT(DMABRG2, 0xac0),
+	INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
+	INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0),
+	INTC_VECT(SCIF1_ERI, 0xb00), INTC_VECT(SCIF1_RXI, 0xb20),
+	INTC_VECT(SCIF1_BRI, 0xb40), INTC_VECT(SCIF1_TXI, 0xb60),
+	INTC_VECT(SCIF2_ERI, 0xb80), INTC_VECT(SCIF2_RXI, 0xba0),
+	INTC_VECT(SCIF2_BRI, 0xbc0), INTC_VECT(SCIF2_TXI, 0xbe0),
+	INTC_VECT(SIM_ERI, 0xc00), INTC_VECT(SIM_RXI, 0xc20),
+	INTC_VECT(SIM_TXI, 0xc40), INTC_VECT(SIM_TEI, 0xc60),
+	INTC_VECT(HSPI, 0xc80),
+	INTC_VECT(MMCIF0, 0xd00), INTC_VECT(MMCIF1, 0xd20),
+	INTC_VECT(MMCIF2, 0xd40), INTC_VECT(MMCIF3, 0xd60),
+	INTC_VECT(MFI, 0xe80), /* 0xf80 according to data sheet */
+	INTC_VECT(ADC, 0xf80), INTC_VECT(CMT, 0xfa0),
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
+	INTC_VECT(WDT, 0x560),
+	INTC_VECT(REF, 0x580), INTC_VECT(REF, 0x5a0),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(DMABRG, DMABRG0, DMABRG1, DMABRG2),
+	INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
+	INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
+	INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
+	INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI),
+	INTC_GROUP(MMCIF, MMCIF0, MMCIF1, MMCIF2, MMCIF3),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xfe080040, 0xfe080060, 32, /* INTMSK00 / INTMSKCLR00 */
+	  { IRQ4, IRQ5, IRQ6, IRQ7, 0, 0, HCAN20, HCAN21,
+	    SSI0, SSI1, HAC0, HAC1, I2C0, I2C1, USB, LCDC,
+	    0, DMABRG0, DMABRG1, DMABRG2,
+	    SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
+	    SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
+	    SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, } },
+	{ 0xfe080044, 0xfe080064, 32, /* INTMSK04 / INTMSKCLR04 */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
+	    HSPI, MMCIF0, MMCIF1, MMCIF2,
+	    MMCIF3, 0, 0, 0, 0, 0, 0, 0,
+	    0, MFI, 0, 0, 0, 0, ADC, CMT, } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
+	{ 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } },
+	{ 0xffd0000c, 0, 16, 4, /* IPRC */ { GPIOI, DMAC, 0, HUDI } },
+	{ 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
+	{ 0xfe080000, 0, 32, 4, /* INTPRI00 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ 0xfe080004, 0, 32, 4, /* INTPRI04 */ { HCAN20, HCAN21, SSI0, SSI1,
+						 HAC0, HAC1, I2C0, I2C1 } },
+	{ 0xfe080008, 0, 32, 4, /* INTPRI08 */ { USB, LCDC, DMABRG, SCIF0,
+						 SCIF1, SCIF2, SIM, HSPI } },
+	{ 0xfe08000c, 0, 32, 4, /* INTPRI0C */ { 0, 0, MMCIF, 0,
+						 MFI, 0, ADC, CMT } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7760", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+static struct intc_vect vectors_irq[] __initdata = {
+	INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
+	INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irq, "sh7760-irq", vectors_irq, groups,
+			 mask_registers, prio_registers, NULL);
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xfe600000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x880)),
+	DEFINE_RES_IRQ(evt2irq(0x8a0)),
+	DEFINE_RES_IRQ(evt2irq(0x8e0)),
+	DEFINE_RES_IRQ(evt2irq(0x8c0)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.type		= PORT_SCIF,
+	.scscr		= SCSCR_REIE,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xfe610000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xb00)),
+	DEFINE_RES_IRQ(evt2irq(0xb20)),
+	DEFINE_RES_IRQ(evt2irq(0xb60)),
+	DEFINE_RES_IRQ(evt2irq(0xb40)),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xfe620000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xb80)),
+	DEFINE_RES_IRQ(evt2irq(0xba0)),
+	DEFINE_RES_IRQ(evt2irq(0xbe0)),
+	DEFINE_RES_IRQ(evt2irq(0xbc0)),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	/*
+	 * This is actually a SIM card module serial port, based on an SCI with
+	 * additional registers. The sh-sci driver doesn't support the SIM port
+	 * type, declare it as a SCI. Don't declare the additional registers in
+	 * the memory resource or the driver will compute an incorrect regshift
+	 * value.
+	 */
+	.type		= PORT_SCI,
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xfe480000, 0x10),
+	DEFINE_RES_IRQ(evt2irq(0xc00)),
+	DEFINE_RES_IRQ(evt2irq(0xc20)),
+	DEFINE_RES_IRQ(evt2irq(0xc40)),
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80000, 0x30),
+	DEFINE_RES_IRQ(evt2irq(0x400)),
+	DEFINE_RES_IRQ(evt2irq(0x420)),
+	DEFINE_RES_IRQ(evt2irq(0x440)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+
+static struct platform_device *sh7760_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&tmu0_device,
+};
+
+static int __init sh7760_devices_setup(void)
+{
+	return platform_add_devices(sh7760_devices,
+				    ARRAY_SIZE(sh7760_devices));
+}
+arch_initcall(sh7760_devices_setup);
+
+static struct platform_device *sh7760_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&tmu0_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7760_early_devices,
+				   ARRAY_SIZE(sh7760_early_devices));
+}
+
+#define INTC_ICR	0xffd00000UL
+#define INTC_ICR_IRLM	(1 << 7)
+
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ:
+		__raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+		register_intc_controller(&intc_desc_irq);
+		break;
+	default:
+		BUG();
+	}
+}
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/softfloat.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/softfloat.c
new file mode 100644
index 0000000..42edf2e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/softfloat.c
@@ -0,0 +1,930 @@
+/*
+ * Floating point emulation support for subnormalised numbers on SH4
+ * architecture This file is derived from the SoftFloat IEC/IEEE
+ * Floating-point Arithmetic Package, Release 2 the original license of
+ * which is reproduced below.
+ *
+ * ========================================================================
+ *
+ * This C source file is part of the SoftFloat IEC/IEEE Floating-point
+ * Arithmetic Package, Release 2.
+ *
+ * Written by John R. Hauser.  This work was made possible in part by the
+ * International Computer Science Institute, located at Suite 600, 1947 Center
+ * Street, Berkeley, California 94704.  Funding was partially provided by the
+ * National Science Foundation under grant MIP-9311980.  The original version
+ * of this code was written as part of a project to build a fixed-point vector
+ * processor in collaboration with the University of California at Berkeley,
+ * overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
+ * is available through the web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
+ * arithmetic/softfloat.html'.
+ *
+ * THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
+ * has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
+ * TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
+ * PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
+ * AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
+ *
+ * Derivative works are acceptable, even for commercial purposes, so long as
+ * (1) they include prominent notice that the work is derivative, and (2) they
+ * include prominent notice akin to these three paragraphs for those parts of
+ * this code that are retained.
+ *
+ * ========================================================================
+ *
+ * SH4 modifications by Ismail Dhaoui <ismail.dhaoui@st.com>
+ * and Kamel Khelifi <kamel.khelifi@st.com>
+ */
+#include <linux/kernel.h>
+#include <cpu/fpu.h>
+#include <asm/div64.h>
+
+#define LIT64( a ) a##LL
+
+typedef char flag;
+typedef unsigned char uint8;
+typedef signed char int8;
+typedef int uint16;
+typedef int int16;
+typedef unsigned int uint32;
+typedef signed int int32;
+
+typedef unsigned long long int bits64;
+typedef signed long long int sbits64;
+
+typedef unsigned char bits8;
+typedef signed char sbits8;
+typedef unsigned short int bits16;
+typedef signed short int sbits16;
+typedef unsigned int bits32;
+typedef signed int sbits32;
+
+typedef unsigned long long int uint64;
+typedef signed long long int int64;
+
+typedef unsigned long int float32;
+typedef unsigned long long float64;
+
+extern void float_raise(unsigned int flags);	/* in fpu.c */
+extern int float_rounding_mode(void);	/* in fpu.c */
+
+bits64 extractFloat64Frac(float64 a);
+flag extractFloat64Sign(float64 a);
+int16 extractFloat64Exp(float64 a);
+int16 extractFloat32Exp(float32 a);
+flag extractFloat32Sign(float32 a);
+bits32 extractFloat32Frac(float32 a);
+float64 packFloat64(flag zSign, int16 zExp, bits64 zSig);
+void shift64RightJamming(bits64 a, int16 count, bits64 * zPtr);
+float32 packFloat32(flag zSign, int16 zExp, bits32 zSig);
+void shift32RightJamming(bits32 a, int16 count, bits32 * zPtr);
+float64 float64_sub(float64 a, float64 b);
+float32 float32_sub(float32 a, float32 b);
+float32 float32_add(float32 a, float32 b);
+float64 float64_add(float64 a, float64 b);
+float64 float64_div(float64 a, float64 b);
+float32 float32_div(float32 a, float32 b);
+float32 float32_mul(float32 a, float32 b);
+float64 float64_mul(float64 a, float64 b);
+float32 float64_to_float32(float64 a);
+void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
+		   bits64 * z1Ptr);
+void sub128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
+		   bits64 * z1Ptr);
+void mul64To128(bits64 a, bits64 b, bits64 * z0Ptr, bits64 * z1Ptr);
+
+static int8 countLeadingZeros32(bits32 a);
+static int8 countLeadingZeros64(bits64 a);
+static float64 normalizeRoundAndPackFloat64(flag zSign, int16 zExp,
+					    bits64 zSig);
+static float64 subFloat64Sigs(float64 a, float64 b, flag zSign);
+static float64 addFloat64Sigs(float64 a, float64 b, flag zSign);
+static float32 roundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig);
+static float32 normalizeRoundAndPackFloat32(flag zSign, int16 zExp,
+					    bits32 zSig);
+static float64 roundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig);
+static float32 subFloat32Sigs(float32 a, float32 b, flag zSign);
+static float32 addFloat32Sigs(float32 a, float32 b, flag zSign);
+static void normalizeFloat64Subnormal(bits64 aSig, int16 * zExpPtr,
+				      bits64 * zSigPtr);
+static bits64 estimateDiv128To64(bits64 a0, bits64 a1, bits64 b);
+static void normalizeFloat32Subnormal(bits32 aSig, int16 * zExpPtr,
+				      bits32 * zSigPtr);
+
+bits64 extractFloat64Frac(float64 a)
+{
+	return a & LIT64(0x000FFFFFFFFFFFFF);
+}
+
+flag extractFloat64Sign(float64 a)
+{
+	return a >> 63;
+}
+
+int16 extractFloat64Exp(float64 a)
+{
+	return (a >> 52) & 0x7FF;
+}
+
+int16 extractFloat32Exp(float32 a)
+{
+	return (a >> 23) & 0xFF;
+}
+
+flag extractFloat32Sign(float32 a)
+{
+	return a >> 31;
+}
+
+bits32 extractFloat32Frac(float32 a)
+{
+	return a & 0x007FFFFF;
+}
+
+float64 packFloat64(flag zSign, int16 zExp, bits64 zSig)
+{
+	return (((bits64) zSign) << 63) + (((bits64) zExp) << 52) + zSig;
+}
+
+void shift64RightJamming(bits64 a, int16 count, bits64 * zPtr)
+{
+	bits64 z;
+
+	if (count == 0) {
+		z = a;
+	} else if (count < 64) {
+		z = (a >> count) | ((a << ((-count) & 63)) != 0);
+	} else {
+		z = (a != 0);
+	}
+	*zPtr = z;
+}
+
+static int8 countLeadingZeros32(bits32 a)
+{
+	static const int8 countLeadingZerosHigh[] = {
+		8, 7, 6, 6, 5, 5, 5, 5, 4, 4, 4, 4, 4, 4, 4, 4,
+		3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
+		2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+		2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+		1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+		1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+		1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+		1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+	};
+	int8 shiftCount;
+
+	shiftCount = 0;
+	if (a < 0x10000) {
+		shiftCount += 16;
+		a <<= 16;
+	}
+	if (a < 0x1000000) {
+		shiftCount += 8;
+		a <<= 8;
+	}
+	shiftCount += countLeadingZerosHigh[a >> 24];
+	return shiftCount;
+
+}
+
+static int8 countLeadingZeros64(bits64 a)
+{
+	int8 shiftCount;
+
+	shiftCount = 0;
+	if (a < ((bits64) 1) << 32) {
+		shiftCount += 32;
+	} else {
+		a >>= 32;
+	}
+	shiftCount += countLeadingZeros32(a);
+	return shiftCount;
+
+}
+
+static float64 normalizeRoundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig)
+{
+	int8 shiftCount;
+
+	shiftCount = countLeadingZeros64(zSig) - 1;
+	return roundAndPackFloat64(zSign, zExp - shiftCount,
+				   zSig << shiftCount);
+
+}
+
+static float64 subFloat64Sigs(float64 a, float64 b, flag zSign)
+{
+	int16 aExp, bExp, zExp;
+	bits64 aSig, bSig, zSig;
+	int16 expDiff;
+
+	aSig = extractFloat64Frac(a);
+	aExp = extractFloat64Exp(a);
+	bSig = extractFloat64Frac(b);
+	bExp = extractFloat64Exp(b);
+	expDiff = aExp - bExp;
+	aSig <<= 10;
+	bSig <<= 10;
+	if (0 < expDiff)
+		goto aExpBigger;
+	if (expDiff < 0)
+		goto bExpBigger;
+	if (aExp == 0) {
+		aExp = 1;
+		bExp = 1;
+	}
+	if (bSig < aSig)
+		goto aBigger;
+	if (aSig < bSig)
+		goto bBigger;
+	return packFloat64(float_rounding_mode() == FPSCR_RM_ZERO, 0, 0);
+      bExpBigger:
+	if (bExp == 0x7FF) {
+		return packFloat64(zSign ^ 1, 0x7FF, 0);
+	}
+	if (aExp == 0) {
+		++expDiff;
+	} else {
+		aSig |= LIT64(0x4000000000000000);
+	}
+	shift64RightJamming(aSig, -expDiff, &aSig);
+	bSig |= LIT64(0x4000000000000000);
+      bBigger:
+	zSig = bSig - aSig;
+	zExp = bExp;
+	zSign ^= 1;
+	goto normalizeRoundAndPack;
+      aExpBigger:
+	if (aExp == 0x7FF) {
+		return a;
+	}
+	if (bExp == 0) {
+		--expDiff;
+	} else {
+		bSig |= LIT64(0x4000000000000000);
+	}
+	shift64RightJamming(bSig, expDiff, &bSig);
+	aSig |= LIT64(0x4000000000000000);
+      aBigger:
+	zSig = aSig - bSig;
+	zExp = aExp;
+      normalizeRoundAndPack:
+	--zExp;
+	return normalizeRoundAndPackFloat64(zSign, zExp, zSig);
+
+}
+static float64 addFloat64Sigs(float64 a, float64 b, flag zSign)
+{
+	int16 aExp, bExp, zExp;
+	bits64 aSig, bSig, zSig;
+	int16 expDiff;
+
+	aSig = extractFloat64Frac(a);
+	aExp = extractFloat64Exp(a);
+	bSig = extractFloat64Frac(b);
+	bExp = extractFloat64Exp(b);
+	expDiff = aExp - bExp;
+	aSig <<= 9;
+	bSig <<= 9;
+	if (0 < expDiff) {
+		if (aExp == 0x7FF) {
+			return a;
+		}
+		if (bExp == 0) {
+			--expDiff;
+		} else {
+			bSig |= LIT64(0x2000000000000000);
+		}
+		shift64RightJamming(bSig, expDiff, &bSig);
+		zExp = aExp;
+	} else if (expDiff < 0) {
+		if (bExp == 0x7FF) {
+			return packFloat64(zSign, 0x7FF, 0);
+		}
+		if (aExp == 0) {
+			++expDiff;
+		} else {
+			aSig |= LIT64(0x2000000000000000);
+		}
+		shift64RightJamming(aSig, -expDiff, &aSig);
+		zExp = bExp;
+	} else {
+		if (aExp == 0x7FF) {
+			return a;
+		}
+		if (aExp == 0)
+			return packFloat64(zSign, 0, (aSig + bSig) >> 9);
+		zSig = LIT64(0x4000000000000000) + aSig + bSig;
+		zExp = aExp;
+		goto roundAndPack;
+	}
+	aSig |= LIT64(0x2000000000000000);
+	zSig = (aSig + bSig) << 1;
+	--zExp;
+	if ((sbits64) zSig < 0) {
+		zSig = aSig + bSig;
+		++zExp;
+	}
+      roundAndPack:
+	return roundAndPackFloat64(zSign, zExp, zSig);
+
+}
+
+float32 packFloat32(flag zSign, int16 zExp, bits32 zSig)
+{
+	return (((bits32) zSign) << 31) + (((bits32) zExp) << 23) + zSig;
+}
+
+void shift32RightJamming(bits32 a, int16 count, bits32 * zPtr)
+{
+	bits32 z;
+	if (count == 0) {
+		z = a;
+	} else if (count < 32) {
+		z = (a >> count) | ((a << ((-count) & 31)) != 0);
+	} else {
+		z = (a != 0);
+	}
+	*zPtr = z;
+}
+
+static float32 roundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig)
+{
+	flag roundNearestEven;
+	int8 roundIncrement, roundBits;
+	flag isTiny;
+
+	/* SH4 has only 2 rounding modes - round to nearest and round to zero */
+	roundNearestEven = (float_rounding_mode() == FPSCR_RM_NEAREST);
+	roundIncrement = 0x40;
+	if (!roundNearestEven) {
+		roundIncrement = 0;
+	}
+	roundBits = zSig & 0x7F;
+	if (0xFD <= (bits16) zExp) {
+		if ((0xFD < zExp)
+		    || ((zExp == 0xFD)
+			&& ((sbits32) (zSig + roundIncrement) < 0))
+		    ) {
+			float_raise(FPSCR_CAUSE_OVERFLOW | FPSCR_CAUSE_INEXACT);
+			return packFloat32(zSign, 0xFF,
+					   0) - (roundIncrement == 0);
+		}
+		if (zExp < 0) {
+			isTiny = (zExp < -1)
+			    || (zSig + roundIncrement < 0x80000000);
+			shift32RightJamming(zSig, -zExp, &zSig);
+			zExp = 0;
+			roundBits = zSig & 0x7F;
+			if (isTiny && roundBits)
+				float_raise(FPSCR_CAUSE_UNDERFLOW);
+		}
+	}
+	if (roundBits)
+		float_raise(FPSCR_CAUSE_INEXACT);
+	zSig = (zSig + roundIncrement) >> 7;
+	zSig &= ~(((roundBits ^ 0x40) == 0) & roundNearestEven);
+	if (zSig == 0)
+		zExp = 0;
+	return packFloat32(zSign, zExp, zSig);
+
+}
+
+static float32 normalizeRoundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig)
+{
+	int8 shiftCount;
+
+	shiftCount = countLeadingZeros32(zSig) - 1;
+	return roundAndPackFloat32(zSign, zExp - shiftCount,
+				   zSig << shiftCount);
+}
+
+static float64 roundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig)
+{
+	flag roundNearestEven;
+	int16 roundIncrement, roundBits;
+	flag isTiny;
+
+	/* SH4 has only 2 rounding modes - round to nearest and round to zero */
+	roundNearestEven = (float_rounding_mode() == FPSCR_RM_NEAREST);
+	roundIncrement = 0x200;
+	if (!roundNearestEven) {
+		roundIncrement = 0;
+	}
+	roundBits = zSig & 0x3FF;
+	if (0x7FD <= (bits16) zExp) {
+		if ((0x7FD < zExp)
+		    || ((zExp == 0x7FD)
+			&& ((sbits64) (zSig + roundIncrement) < 0))
+		    ) {
+			float_raise(FPSCR_CAUSE_OVERFLOW | FPSCR_CAUSE_INEXACT);
+			return packFloat64(zSign, 0x7FF,
+					   0) - (roundIncrement == 0);
+		}
+		if (zExp < 0) {
+			isTiny = (zExp < -1)
+			    || (zSig + roundIncrement <
+				LIT64(0x8000000000000000));
+			shift64RightJamming(zSig, -zExp, &zSig);
+			zExp = 0;
+			roundBits = zSig & 0x3FF;
+			if (isTiny && roundBits)
+				float_raise(FPSCR_CAUSE_UNDERFLOW);
+		}
+	}
+	if (roundBits)
+		float_raise(FPSCR_CAUSE_INEXACT);
+	zSig = (zSig + roundIncrement) >> 10;
+	zSig &= ~(((roundBits ^ 0x200) == 0) & roundNearestEven);
+	if (zSig == 0)
+		zExp = 0;
+	return packFloat64(zSign, zExp, zSig);
+
+}
+
+static float32 subFloat32Sigs(float32 a, float32 b, flag zSign)
+{
+	int16 aExp, bExp, zExp;
+	bits32 aSig, bSig, zSig;
+	int16 expDiff;
+
+	aSig = extractFloat32Frac(a);
+	aExp = extractFloat32Exp(a);
+	bSig = extractFloat32Frac(b);
+	bExp = extractFloat32Exp(b);
+	expDiff = aExp - bExp;
+	aSig <<= 7;
+	bSig <<= 7;
+	if (0 < expDiff)
+		goto aExpBigger;
+	if (expDiff < 0)
+		goto bExpBigger;
+	if (aExp == 0) {
+		aExp = 1;
+		bExp = 1;
+	}
+	if (bSig < aSig)
+		goto aBigger;
+	if (aSig < bSig)
+		goto bBigger;
+	return packFloat32(float_rounding_mode() == FPSCR_RM_ZERO, 0, 0);
+      bExpBigger:
+	if (bExp == 0xFF) {
+		return packFloat32(zSign ^ 1, 0xFF, 0);
+	}
+	if (aExp == 0) {
+		++expDiff;
+	} else {
+		aSig |= 0x40000000;
+	}
+	shift32RightJamming(aSig, -expDiff, &aSig);
+	bSig |= 0x40000000;
+      bBigger:
+	zSig = bSig - aSig;
+	zExp = bExp;
+	zSign ^= 1;
+	goto normalizeRoundAndPack;
+      aExpBigger:
+	if (aExp == 0xFF) {
+		return a;
+	}
+	if (bExp == 0) {
+		--expDiff;
+	} else {
+		bSig |= 0x40000000;
+	}
+	shift32RightJamming(bSig, expDiff, &bSig);
+	aSig |= 0x40000000;
+      aBigger:
+	zSig = aSig - bSig;
+	zExp = aExp;
+      normalizeRoundAndPack:
+	--zExp;
+	return normalizeRoundAndPackFloat32(zSign, zExp, zSig);
+
+}
+
+static float32 addFloat32Sigs(float32 a, float32 b, flag zSign)
+{
+	int16 aExp, bExp, zExp;
+	bits32 aSig, bSig, zSig;
+	int16 expDiff;
+
+	aSig = extractFloat32Frac(a);
+	aExp = extractFloat32Exp(a);
+	bSig = extractFloat32Frac(b);
+	bExp = extractFloat32Exp(b);
+	expDiff = aExp - bExp;
+	aSig <<= 6;
+	bSig <<= 6;
+	if (0 < expDiff) {
+		if (aExp == 0xFF) {
+			return a;
+		}
+		if (bExp == 0) {
+			--expDiff;
+		} else {
+			bSig |= 0x20000000;
+		}
+		shift32RightJamming(bSig, expDiff, &bSig);
+		zExp = aExp;
+	} else if (expDiff < 0) {
+		if (bExp == 0xFF) {
+			return packFloat32(zSign, 0xFF, 0);
+		}
+		if (aExp == 0) {
+			++expDiff;
+		} else {
+			aSig |= 0x20000000;
+		}
+		shift32RightJamming(aSig, -expDiff, &aSig);
+		zExp = bExp;
+	} else {
+		if (aExp == 0xFF) {
+			return a;
+		}
+		if (aExp == 0)
+			return packFloat32(zSign, 0, (aSig + bSig) >> 6);
+		zSig = 0x40000000 + aSig + bSig;
+		zExp = aExp;
+		goto roundAndPack;
+	}
+	aSig |= 0x20000000;
+	zSig = (aSig + bSig) << 1;
+	--zExp;
+	if ((sbits32) zSig < 0) {
+		zSig = aSig + bSig;
+		++zExp;
+	}
+      roundAndPack:
+	return roundAndPackFloat32(zSign, zExp, zSig);
+
+}
+
+float64 float64_sub(float64 a, float64 b)
+{
+	flag aSign, bSign;
+
+	aSign = extractFloat64Sign(a);
+	bSign = extractFloat64Sign(b);
+	if (aSign == bSign) {
+		return subFloat64Sigs(a, b, aSign);
+	} else {
+		return addFloat64Sigs(a, b, aSign);
+	}
+
+}
+
+float32 float32_sub(float32 a, float32 b)
+{
+	flag aSign, bSign;
+
+	aSign = extractFloat32Sign(a);
+	bSign = extractFloat32Sign(b);
+	if (aSign == bSign) {
+		return subFloat32Sigs(a, b, aSign);
+	} else {
+		return addFloat32Sigs(a, b, aSign);
+	}
+
+}
+
+float32 float32_add(float32 a, float32 b)
+{
+	flag aSign, bSign;
+
+	aSign = extractFloat32Sign(a);
+	bSign = extractFloat32Sign(b);
+	if (aSign == bSign) {
+		return addFloat32Sigs(a, b, aSign);
+	} else {
+		return subFloat32Sigs(a, b, aSign);
+	}
+
+}
+
+float64 float64_add(float64 a, float64 b)
+{
+	flag aSign, bSign;
+
+	aSign = extractFloat64Sign(a);
+	bSign = extractFloat64Sign(b);
+	if (aSign == bSign) {
+		return addFloat64Sigs(a, b, aSign);
+	} else {
+		return subFloat64Sigs(a, b, aSign);
+	}
+}
+
+static void
+normalizeFloat64Subnormal(bits64 aSig, int16 * zExpPtr, bits64 * zSigPtr)
+{
+	int8 shiftCount;
+
+	shiftCount = countLeadingZeros64(aSig) - 11;
+	*zSigPtr = aSig << shiftCount;
+	*zExpPtr = 1 - shiftCount;
+}
+
+void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
+		   bits64 * z1Ptr)
+{
+	bits64 z1;
+
+	z1 = a1 + b1;
+	*z1Ptr = z1;
+	*z0Ptr = a0 + b0 + (z1 < a1);
+}
+
+void
+sub128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
+       bits64 * z1Ptr)
+{
+	*z1Ptr = a1 - b1;
+	*z0Ptr = a0 - b0 - (a1 < b1);
+}
+
+static bits64 estimateDiv128To64(bits64 a0, bits64 a1, bits64 b)
+{
+	bits64 b0, b1;
+	bits64 rem0, rem1, term0, term1;
+	bits64 z, tmp;
+	if (b <= a0)
+		return LIT64(0xFFFFFFFFFFFFFFFF);
+	b0 = b >> 32;
+	tmp = a0;
+	do_div(tmp, b0);
+
+	z = (b0 << 32 <= a0) ? LIT64(0xFFFFFFFF00000000) : tmp << 32;
+	mul64To128(b, z, &term0, &term1);
+	sub128(a0, a1, term0, term1, &rem0, &rem1);
+	while (((sbits64) rem0) < 0) {
+		z -= LIT64(0x100000000);
+		b1 = b << 32;
+		add128(rem0, rem1, b0, b1, &rem0, &rem1);
+	}
+	rem0 = (rem0 << 32) | (rem1 >> 32);
+	tmp = rem0;
+	do_div(tmp, b0);
+	z |= (b0 << 32 <= rem0) ? 0xFFFFFFFF : tmp;
+	return z;
+}
+
+void mul64To128(bits64 a, bits64 b, bits64 * z0Ptr, bits64 * z1Ptr)
+{
+	bits32 aHigh, aLow, bHigh, bLow;
+	bits64 z0, zMiddleA, zMiddleB, z1;
+
+	aLow = a;
+	aHigh = a >> 32;
+	bLow = b;
+	bHigh = b >> 32;
+	z1 = ((bits64) aLow) * bLow;
+	zMiddleA = ((bits64) aLow) * bHigh;
+	zMiddleB = ((bits64) aHigh) * bLow;
+	z0 = ((bits64) aHigh) * bHigh;
+	zMiddleA += zMiddleB;
+	z0 += (((bits64) (zMiddleA < zMiddleB)) << 32) + (zMiddleA >> 32);
+	zMiddleA <<= 32;
+	z1 += zMiddleA;
+	z0 += (z1 < zMiddleA);
+	*z1Ptr = z1;
+	*z0Ptr = z0;
+
+}
+
+static void normalizeFloat32Subnormal(bits32 aSig, int16 * zExpPtr,
+				      bits32 * zSigPtr)
+{
+	int8 shiftCount;
+
+	shiftCount = countLeadingZeros32(aSig) - 8;
+	*zSigPtr = aSig << shiftCount;
+	*zExpPtr = 1 - shiftCount;
+
+}
+
+float64 float64_div(float64 a, float64 b)
+{
+	flag aSign, bSign, zSign;
+	int16 aExp, bExp, zExp;
+	bits64 aSig, bSig, zSig;
+	bits64 rem0, rem1;
+	bits64 term0, term1;
+
+	aSig = extractFloat64Frac(a);
+	aExp = extractFloat64Exp(a);
+	aSign = extractFloat64Sign(a);
+	bSig = extractFloat64Frac(b);
+	bExp = extractFloat64Exp(b);
+	bSign = extractFloat64Sign(b);
+	zSign = aSign ^ bSign;
+	if (aExp == 0x7FF) {
+		if (bExp == 0x7FF) {
+		}
+		return packFloat64(zSign, 0x7FF, 0);
+	}
+	if (bExp == 0x7FF) {
+		return packFloat64(zSign, 0, 0);
+	}
+	if (bExp == 0) {
+		if (bSig == 0) {
+			if ((aExp | aSig) == 0) {
+				float_raise(FPSCR_CAUSE_INVALID);
+			}
+			return packFloat64(zSign, 0x7FF, 0);
+		}
+		normalizeFloat64Subnormal(bSig, &bExp, &bSig);
+	}
+	if (aExp == 0) {
+		if (aSig == 0)
+			return packFloat64(zSign, 0, 0);
+		normalizeFloat64Subnormal(aSig, &aExp, &aSig);
+	}
+	zExp = aExp - bExp + 0x3FD;
+	aSig = (aSig | LIT64(0x0010000000000000)) << 10;
+	bSig = (bSig | LIT64(0x0010000000000000)) << 11;
+	if (bSig <= (aSig + aSig)) {
+		aSig >>= 1;
+		++zExp;
+	}
+	zSig = estimateDiv128To64(aSig, 0, bSig);
+	if ((zSig & 0x1FF) <= 2) {
+		mul64To128(bSig, zSig, &term0, &term1);
+		sub128(aSig, 0, term0, term1, &rem0, &rem1);
+		while ((sbits64) rem0 < 0) {
+			--zSig;
+			add128(rem0, rem1, 0, bSig, &rem0, &rem1);
+		}
+		zSig |= (rem1 != 0);
+	}
+	return roundAndPackFloat64(zSign, zExp, zSig);
+
+}
+
+float32 float32_div(float32 a, float32 b)
+{
+	flag aSign, bSign, zSign;
+	int16 aExp, bExp, zExp;
+	bits32 aSig, bSig;
+	uint64_t zSig;
+
+	aSig = extractFloat32Frac(a);
+	aExp = extractFloat32Exp(a);
+	aSign = extractFloat32Sign(a);
+	bSig = extractFloat32Frac(b);
+	bExp = extractFloat32Exp(b);
+	bSign = extractFloat32Sign(b);
+	zSign = aSign ^ bSign;
+	if (aExp == 0xFF) {
+		if (bExp == 0xFF) {
+		}
+		return packFloat32(zSign, 0xFF, 0);
+	}
+	if (bExp == 0xFF) {
+		return packFloat32(zSign, 0, 0);
+	}
+	if (bExp == 0) {
+		if (bSig == 0) {
+			return packFloat32(zSign, 0xFF, 0);
+		}
+		normalizeFloat32Subnormal(bSig, &bExp, &bSig);
+	}
+	if (aExp == 0) {
+		if (aSig == 0)
+			return packFloat32(zSign, 0, 0);
+		normalizeFloat32Subnormal(aSig, &aExp, &aSig);
+	}
+	zExp = aExp - bExp + 0x7D;
+	aSig = (aSig | 0x00800000) << 7;
+	bSig = (bSig | 0x00800000) << 8;
+	if (bSig <= (aSig + aSig)) {
+		aSig >>= 1;
+		++zExp;
+	}
+	zSig = (((bits64) aSig) << 32);
+	do_div(zSig, bSig);
+
+	if ((zSig & 0x3F) == 0) {
+		zSig |= (((bits64) bSig) * zSig != ((bits64) aSig) << 32);
+	}
+	return roundAndPackFloat32(zSign, zExp, (bits32)zSig);
+
+}
+
+float32 float32_mul(float32 a, float32 b)
+{
+	char aSign, bSign, zSign;
+	int aExp, bExp, zExp;
+	unsigned int aSig, bSig;
+	unsigned long long zSig64;
+	unsigned int zSig;
+
+	aSig = extractFloat32Frac(a);
+	aExp = extractFloat32Exp(a);
+	aSign = extractFloat32Sign(a);
+	bSig = extractFloat32Frac(b);
+	bExp = extractFloat32Exp(b);
+	bSign = extractFloat32Sign(b);
+	zSign = aSign ^ bSign;
+	if (aExp == 0) {
+		if (aSig == 0)
+			return packFloat32(zSign, 0, 0);
+		normalizeFloat32Subnormal(aSig, &aExp, &aSig);
+	}
+	if (bExp == 0) {
+		if (bSig == 0)
+			return packFloat32(zSign, 0, 0);
+		normalizeFloat32Subnormal(bSig, &bExp, &bSig);
+	}
+	if ((bExp == 0xff && bSig == 0) || (aExp == 0xff && aSig == 0))
+		return roundAndPackFloat32(zSign, 0xff, 0);
+
+	zExp = aExp + bExp - 0x7F;
+	aSig = (aSig | 0x00800000) << 7;
+	bSig = (bSig | 0x00800000) << 8;
+	shift64RightJamming(((unsigned long long)aSig) * bSig, 32, &zSig64);
+	zSig = zSig64;
+	if (0 <= (signed int)(zSig << 1)) {
+		zSig <<= 1;
+		--zExp;
+	}
+	return roundAndPackFloat32(zSign, zExp, zSig);
+
+}
+
+float64 float64_mul(float64 a, float64 b)
+{
+	char aSign, bSign, zSign;
+	int aExp, bExp, zExp;
+	unsigned long long int aSig, bSig, zSig0, zSig1;
+
+	aSig = extractFloat64Frac(a);
+	aExp = extractFloat64Exp(a);
+	aSign = extractFloat64Sign(a);
+	bSig = extractFloat64Frac(b);
+	bExp = extractFloat64Exp(b);
+	bSign = extractFloat64Sign(b);
+	zSign = aSign ^ bSign;
+
+	if (aExp == 0) {
+		if (aSig == 0)
+			return packFloat64(zSign, 0, 0);
+		normalizeFloat64Subnormal(aSig, &aExp, &aSig);
+	}
+	if (bExp == 0) {
+		if (bSig == 0)
+			return packFloat64(zSign, 0, 0);
+		normalizeFloat64Subnormal(bSig, &bExp, &bSig);
+	}
+	if ((aExp == 0x7ff && aSig == 0) || (bExp == 0x7ff && bSig == 0))
+		return roundAndPackFloat64(zSign, 0x7ff, 0);
+
+	zExp = aExp + bExp - 0x3FF;
+	aSig = (aSig | 0x0010000000000000LL) << 10;
+	bSig = (bSig | 0x0010000000000000LL) << 11;
+	mul64To128(aSig, bSig, &zSig0, &zSig1);
+	zSig0 |= (zSig1 != 0);
+	if (0 <= (signed long long int)(zSig0 << 1)) {
+		zSig0 <<= 1;
+		--zExp;
+	}
+	return roundAndPackFloat64(zSign, zExp, zSig0);
+}
+
+/*
+ * -------------------------------------------------------------------------------
+ *  Returns the result of converting the double-precision floating-point value
+ *  `a' to the single-precision floating-point format.  The conversion is
+ *  performed according to the IEC/IEEE Standard for Binary Floating-point
+ *  Arithmetic.
+ *  -------------------------------------------------------------------------------
+ *  */
+float32 float64_to_float32(float64 a)
+{
+    flag aSign;
+    int16 aExp;
+    bits64 aSig;
+    bits32 zSig;
+
+    aSig = extractFloat64Frac( a );
+    aExp = extractFloat64Exp( a );
+    aSign = extractFloat64Sign( a );
+
+    shift64RightJamming( aSig, 22, &aSig );
+    zSig = aSig;
+    if ( aExp || zSig ) {
+        zSig |= 0x40000000;
+        aExp -= 0x381;
+    }
+    return roundAndPackFloat32(aSign, aExp, zSig);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/sq.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/sq.c
new file mode 100644
index 0000000..4ca78ed
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4/sq.c
@@ -0,0 +1,415 @@
+/*
+ * arch/sh/kernel/cpu/sh4/sq.c
+ *
+ * General management API for SH-4 integrated Store Queues
+ *
+ * Copyright (C) 2001 - 2006  Paul Mundt
+ * Copyright (C) 2001, 2002  M. R. Brown
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/bitmap.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/prefetch.h>
+#include <asm/page.h>
+#include <asm/cacheflush.h>
+#include <cpu/sq.h>
+
+struct sq_mapping;
+
+struct sq_mapping {
+	const char *name;
+
+	unsigned long sq_addr;
+	unsigned long addr;
+	unsigned int size;
+
+	struct sq_mapping *next;
+};
+
+static struct sq_mapping *sq_mapping_list;
+static DEFINE_SPINLOCK(sq_mapping_lock);
+static struct kmem_cache *sq_cache;
+static unsigned long *sq_bitmap;
+
+#define store_queue_barrier()			\
+do {						\
+	(void)__raw_readl(P4SEG_STORE_QUE);	\
+	__raw_writel(0, P4SEG_STORE_QUE + 0);	\
+	__raw_writel(0, P4SEG_STORE_QUE + 8);	\
+} while (0);
+
+/**
+ * sq_flush_range - Flush (prefetch) a specific SQ range
+ * @start: the store queue address to start flushing from
+ * @len: the length to flush
+ *
+ * Flushes the store queue cache from @start to @start + @len in a
+ * linear fashion.
+ */
+void sq_flush_range(unsigned long start, unsigned int len)
+{
+	unsigned long *sq = (unsigned long *)start;
+
+	/* Flush the queues */
+	for (len >>= 5; len--; sq += 8)
+		prefetchw(sq);
+
+	/* Wait for completion */
+	store_queue_barrier();
+}
+EXPORT_SYMBOL(sq_flush_range);
+
+static inline void sq_mapping_list_add(struct sq_mapping *map)
+{
+	struct sq_mapping **p, *tmp;
+
+	spin_lock_irq(&sq_mapping_lock);
+
+	p = &sq_mapping_list;
+	while ((tmp = *p) != NULL)
+		p = &tmp->next;
+
+	map->next = tmp;
+	*p = map;
+
+	spin_unlock_irq(&sq_mapping_lock);
+}
+
+static inline void sq_mapping_list_del(struct sq_mapping *map)
+{
+	struct sq_mapping **p, *tmp;
+
+	spin_lock_irq(&sq_mapping_lock);
+
+	for (p = &sq_mapping_list; (tmp = *p); p = &tmp->next)
+		if (tmp == map) {
+			*p = tmp->next;
+			break;
+		}
+
+	spin_unlock_irq(&sq_mapping_lock);
+}
+
+static int __sq_remap(struct sq_mapping *map, pgprot_t prot)
+{
+#if defined(CONFIG_MMU)
+	struct vm_struct *vma;
+
+	vma = __get_vm_area(map->size, VM_ALLOC, map->sq_addr, SQ_ADDRMAX);
+	if (!vma)
+		return -ENOMEM;
+
+	vma->phys_addr = map->addr;
+
+	if (ioremap_page_range((unsigned long)vma->addr,
+			       (unsigned long)vma->addr + map->size,
+			       vma->phys_addr, prot)) {
+		vunmap(vma->addr);
+		return -EAGAIN;
+	}
+#else
+	/*
+	 * Without an MMU (or with it turned off), this is much more
+	 * straightforward, as we can just load up each queue's QACR with
+	 * the physical address appropriately masked.
+	 */
+	__raw_writel(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0);
+	__raw_writel(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1);
+#endif
+
+	return 0;
+}
+
+/**
+ * sq_remap - Map a physical address through the Store Queues
+ * @phys: Physical address of mapping.
+ * @size: Length of mapping.
+ * @name: User invoking mapping.
+ * @prot: Protection bits.
+ *
+ * Remaps the physical address @phys through the next available store queue
+ * address of @size length. @name is logged at boot time as well as through
+ * the sysfs interface.
+ */
+unsigned long sq_remap(unsigned long phys, unsigned int size,
+		       const char *name, pgprot_t prot)
+{
+	struct sq_mapping *map;
+	unsigned long end;
+	unsigned int psz;
+	int ret, page;
+
+	/* Don't allow wraparound or zero size */
+	end = phys + size - 1;
+	if (unlikely(!size || end < phys))
+		return -EINVAL;
+	/* Don't allow anyone to remap normal memory.. */
+	if (unlikely(phys < virt_to_phys(high_memory)))
+		return -EINVAL;
+
+	phys &= PAGE_MASK;
+	size = PAGE_ALIGN(end + 1) - phys;
+
+	map = kmem_cache_alloc(sq_cache, GFP_KERNEL);
+	if (unlikely(!map))
+		return -ENOMEM;
+
+	map->addr = phys;
+	map->size = size;
+	map->name = name;
+
+	page = bitmap_find_free_region(sq_bitmap, 0x04000000 >> PAGE_SHIFT,
+				       get_order(map->size));
+	if (unlikely(page < 0)) {
+		ret = -ENOSPC;
+		goto out;
+	}
+
+	map->sq_addr = P4SEG_STORE_QUE + (page << PAGE_SHIFT);
+
+	ret = __sq_remap(map, prot);
+	if (unlikely(ret != 0))
+		goto out;
+
+	psz = (size + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+	pr_info("sqremap: %15s  [%4d page%s]  va 0x%08lx   pa 0x%08lx\n",
+		likely(map->name) ? map->name : "???",
+		psz, psz == 1 ? " " : "s",
+		map->sq_addr, map->addr);
+
+	sq_mapping_list_add(map);
+
+	return map->sq_addr;
+
+out:
+	kmem_cache_free(sq_cache, map);
+	return ret;
+}
+EXPORT_SYMBOL(sq_remap);
+
+/**
+ * sq_unmap - Unmap a Store Queue allocation
+ * @vaddr: Pre-allocated Store Queue mapping.
+ *
+ * Unmaps the store queue allocation @map that was previously created by
+ * sq_remap(). Also frees up the pte that was previously inserted into
+ * the kernel page table and discards the UTLB translation.
+ */
+void sq_unmap(unsigned long vaddr)
+{
+	struct sq_mapping **p, *map;
+	int page;
+
+	for (p = &sq_mapping_list; (map = *p); p = &map->next)
+		if (map->sq_addr == vaddr)
+			break;
+
+	if (unlikely(!map)) {
+		printk("%s: bad store queue address 0x%08lx\n",
+		       __func__, vaddr);
+		return;
+	}
+
+	page = (map->sq_addr - P4SEG_STORE_QUE) >> PAGE_SHIFT;
+	bitmap_release_region(sq_bitmap, page, get_order(map->size));
+
+#ifdef CONFIG_MMU
+	{
+		/*
+		 * Tear down the VMA in the MMU case.
+		 */
+		struct vm_struct *vma;
+
+		vma = remove_vm_area((void *)(map->sq_addr & PAGE_MASK));
+		if (!vma) {
+			printk(KERN_ERR "%s: bad address 0x%08lx\n",
+			       __func__, map->sq_addr);
+			return;
+		}
+	}
+#endif
+
+	sq_mapping_list_del(map);
+
+	kmem_cache_free(sq_cache, map);
+}
+EXPORT_SYMBOL(sq_unmap);
+
+/*
+ * Needlessly complex sysfs interface. Unfortunately it doesn't seem like
+ * there is any other easy way to add things on a per-cpu basis without
+ * putting the directory entries somewhere stupid and having to create
+ * links in sysfs by hand back in to the per-cpu directories.
+ *
+ * Some day we may want to have an additional abstraction per store
+ * queue, but considering the kobject hell we already have to deal with,
+ * it's simply not worth the trouble.
+ */
+static struct kobject *sq_kobject[NR_CPUS];
+
+struct sq_sysfs_attr {
+	struct attribute attr;
+	ssize_t (*show)(char *buf);
+	ssize_t (*store)(const char *buf, size_t count);
+};
+
+#define to_sq_sysfs_attr(a)	container_of(a, struct sq_sysfs_attr, attr)
+
+static ssize_t sq_sysfs_show(struct kobject *kobj, struct attribute *attr,
+			     char *buf)
+{
+	struct sq_sysfs_attr *sattr = to_sq_sysfs_attr(attr);
+
+	if (likely(sattr->show))
+		return sattr->show(buf);
+
+	return -EIO;
+}
+
+static ssize_t sq_sysfs_store(struct kobject *kobj, struct attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct sq_sysfs_attr *sattr = to_sq_sysfs_attr(attr);
+
+	if (likely(sattr->store))
+		return sattr->store(buf, count);
+
+	return -EIO;
+}
+
+static ssize_t mapping_show(char *buf)
+{
+	struct sq_mapping **list, *entry;
+	char *p = buf;
+
+	for (list = &sq_mapping_list; (entry = *list); list = &entry->next)
+		p += sprintf(p, "%08lx-%08lx [%08lx]: %s\n",
+			     entry->sq_addr, entry->sq_addr + entry->size,
+			     entry->addr, entry->name);
+
+	return p - buf;
+}
+
+static ssize_t mapping_store(const char *buf, size_t count)
+{
+	unsigned long base = 0, len = 0;
+
+	sscanf(buf, "%lx %lx", &base, &len);
+	if (!base)
+		return -EIO;
+
+	if (likely(len)) {
+		int ret = sq_remap(base, len, "Userspace", PAGE_SHARED);
+		if (ret < 0)
+			return ret;
+	} else
+		sq_unmap(base);
+
+	return count;
+}
+
+static struct sq_sysfs_attr mapping_attr =
+	__ATTR(mapping, 0644, mapping_show, mapping_store);
+
+static struct attribute *sq_sysfs_attrs[] = {
+	&mapping_attr.attr,
+	NULL,
+};
+
+static const struct sysfs_ops sq_sysfs_ops = {
+	.show	= sq_sysfs_show,
+	.store	= sq_sysfs_store,
+};
+
+static struct kobj_type ktype_percpu_entry = {
+	.sysfs_ops	= &sq_sysfs_ops,
+	.default_attrs	= sq_sysfs_attrs,
+};
+
+static int sq_dev_add(struct device *dev, struct subsys_interface *sif)
+{
+	unsigned int cpu = dev->id;
+	struct kobject *kobj;
+	int error;
+
+	sq_kobject[cpu] = kzalloc(sizeof(struct kobject), GFP_KERNEL);
+	if (unlikely(!sq_kobject[cpu]))
+		return -ENOMEM;
+
+	kobj = sq_kobject[cpu];
+	error = kobject_init_and_add(kobj, &ktype_percpu_entry, &dev->kobj,
+				     "%s", "sq");
+	if (!error)
+		kobject_uevent(kobj, KOBJ_ADD);
+	return error;
+}
+
+static void sq_dev_remove(struct device *dev, struct subsys_interface *sif)
+{
+	unsigned int cpu = dev->id;
+	struct kobject *kobj = sq_kobject[cpu];
+
+	kobject_put(kobj);
+}
+
+static struct subsys_interface sq_interface = {
+	.name		= "sq",
+	.subsys		= &cpu_subsys,
+	.add_dev	= sq_dev_add,
+	.remove_dev	= sq_dev_remove,
+};
+
+static int __init sq_api_init(void)
+{
+	unsigned int nr_pages = 0x04000000 >> PAGE_SHIFT;
+	unsigned int size = (nr_pages + (BITS_PER_LONG - 1)) / BITS_PER_LONG;
+	int ret = -ENOMEM;
+
+	printk(KERN_NOTICE "sq: Registering store queue API.\n");
+
+	sq_cache = kmem_cache_create("store_queue_cache",
+				sizeof(struct sq_mapping), 0, 0, NULL);
+	if (unlikely(!sq_cache))
+		return ret;
+
+	sq_bitmap = kzalloc(size, GFP_KERNEL);
+	if (unlikely(!sq_bitmap))
+		goto out;
+
+	ret = subsys_interface_register(&sq_interface);
+	if (unlikely(ret != 0))
+		goto out;
+
+	return 0;
+
+out:
+	kfree(sq_bitmap);
+	kmem_cache_destroy(sq_cache);
+
+	return ret;
+}
+
+static void __exit sq_api_exit(void)
+{
+	subsys_interface_unregister(&sq_interface);
+	kfree(sq_bitmap);
+	kmem_cache_destroy(sq_cache);
+}
+
+module_init(sq_api_init);
+module_exit(sq_api_exit);
+
+MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, M. R. Brown <mrbrown@0xd6.org>");
+MODULE_DESCRIPTION("Simple API for SH-4 integrated Store Queues");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/Makefile b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/Makefile
new file mode 100644
index 0000000..baf73a8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/Makefile
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Linux/SuperH SH-4 backends.
+#
+
+# CPU subtype setup
+obj-$(CONFIG_CPU_SUBTYPE_SH7757)	+= setup-sh7757.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7763)	+= setup-sh7763.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7770)	+= setup-sh7770.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= setup-sh7780.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= setup-sh7785.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7786)	+= setup-sh7786.o intc-shx3.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7343)	+= setup-sh7343.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7722)	+= setup-sh7722.o serial-sh7722.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7723)	+= setup-sh7723.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7724)	+= setup-sh7724.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7734)	+= setup-sh7734.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7366)	+= setup-sh7366.o
+obj-$(CONFIG_CPU_SUBTYPE_SHX3)		+= setup-shx3.o intc-shx3.o
+
+# SMP setup
+smp-$(CONFIG_CPU_SHX3)			:= smp-shx3.o
+
+# Primary on-chip clocks (common)
+clock-$(CONFIG_CPU_SUBTYPE_SH7757)	:= clock-sh7757.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7763)	:= clock-sh7763.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7770)	:= clock-sh7770.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7786)	:= clock-sh7786.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7723.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7724)	:= clock-sh7724.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7734)	:= clock-sh7734.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7366.o
+clock-$(CONFIG_CPU_SUBTYPE_SHX3)	:= clock-shx3.o
+
+# Pinmux setup
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7722)	:= pinmux-sh7722.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7723)	:= pinmux-sh7723.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7724)	:= pinmux-sh7724.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7734)	:= pinmux-sh7734.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7757)	:= pinmux-sh7757.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7785)	:= pinmux-sh7785.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7786)	:= pinmux-sh7786.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SHX3)	:= pinmux-shx3.o
+
+obj-y					+= $(clock-y)
+obj-$(CONFIG_SMP)			+= $(smp-y)
+obj-$(CONFIG_GPIOLIB)			+= $(pinmux-y)
+obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= ubc.o
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
new file mode 100644
index 0000000..a907ee2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
@@ -0,0 +1,289 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+ *
+ * SH7343 clock framework support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <asm/clock.h>
+
+/* SH7343 registers */
+#define FRQCR		0xa4150000
+#define VCLKCR		0xa4150004
+#define SCLKACR		0xa4150008
+#define SCLKBCR		0xa415000c
+#define PLLCR		0xa4150024
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+#define DLLFRQ		0xa4150050
+
+/* Fixed 32 KHz root clock for RTC and Power Management purposes */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+struct clk extal_clk = {
+	.rate		= 33333333,
+};
+
+/* The dll block multiplies the 32khz r_clk, may be used instead of extal */
+static unsigned long dll_recalc(struct clk *clk)
+{
+	unsigned long mult;
+
+	if (__raw_readl(PLLCR) & 0x1000)
+		mult = __raw_readl(DLLFRQ);
+	else
+		mult = 0;
+
+	return clk->parent->rate * mult;
+}
+
+static struct sh_clk_ops dll_clk_ops = {
+	.recalc		= dll_recalc,
+};
+
+static struct clk dll_clk = {
+	.ops		= &dll_clk_ops,
+	.parent		= &r_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+
+	if (__raw_readl(PLLCR) & 0x4000)
+		mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
+
+	return clk->parent->rate * mult;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&dll_clk,
+	&pll_clk,
+};
+
+static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
+static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+	.multipliers = multipliers,
+	.nr_multipliers = ARRAY_SIZE(multipliers),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
+       DIV4_SIUA, DIV4_SIUB, DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4(FRQCR, 20, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_U] = DIV4(FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B3] = DIV4(FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4(FRQCR, 0, 0x1fff, 0),
+	[DIV4_SIUA] = DIV4(SCLKACR, 0, 0x1fff, 0),
+	[DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x1fff, 0),
+};
+
+enum { DIV6_V, DIV6_NR };
+
+struct clk div6_clks[DIV6_NR] = {
+	[DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
+};
+
+#define MSTP(_parent, _reg, _bit, _flags) \
+  SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
+
+enum { MSTP031, MSTP030, MSTP029, MSTP028, MSTP026,
+       MSTP023, MSTP022, MSTP021, MSTP020, MSTP019, MSTP018, MSTP017, MSTP016,
+       MSTP015, MSTP014, MSTP013, MSTP012, MSTP011, MSTP010,
+       MSTP007, MSTP006, MSTP005, MSTP004, MSTP003, MSTP002, MSTP001,
+       MSTP109, MSTP108, MSTP100,
+       MSTP225, MSTP224, MSTP218, MSTP217, MSTP216,
+       MSTP214, MSTP213, MSTP212, MSTP211, MSTP208,
+       MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+       MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP031] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
+	[MSTP030] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
+	[MSTP029] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
+	[MSTP028] = MSTP(&div4_clks[DIV4_U], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
+	[MSTP026] = MSTP(&div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
+	[MSTP023] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
+	[MSTP022] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
+	[MSTP021] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
+	[MSTP020] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
+	[MSTP019] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
+	[MSTP017] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
+	[MSTP015] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
+	[MSTP014] = MSTP(&r_clk, MSTPCR0, 14, 0),
+	[MSTP013] = MSTP(&r_clk, MSTPCR0, 13, 0),
+	[MSTP011] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
+	[MSTP010] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
+	[MSTP007] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
+	[MSTP006] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 6, 0),
+	[MSTP005] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
+	[MSTP004] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 4, 0),
+	[MSTP003] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 3, 0),
+	[MSTP002] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
+	[MSTP001] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 1, 0),
+
+	[MSTP109] = MSTP(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
+	[MSTP108] = MSTP(&div4_clks[DIV4_P], MSTPCR1, 8, 0),
+
+	[MSTP225] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 25, 0),
+	[MSTP224] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 24, 0),
+	[MSTP218] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 18, 0),
+	[MSTP217] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 17, 0),
+	[MSTP216] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 16, 0),
+	[MSTP214] = MSTP(&r_clk, MSTPCR2, 14, 0),
+	[MSTP213] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 13, 0),
+	[MSTP212] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 12, 0),
+	[MSTP211] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 11, 0),
+	[MSTP208] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 8, 0),
+	[MSTP206] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 6, CLK_ENABLE_ON_INIT),
+	[MSTP205] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
+	[MSTP204] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
+	[MSTP203] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
+	[MSTP202] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
+	[MSTP201] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
+	[MSTP200] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("dll_clk", &dll_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("siua_clk", &div4_clks[DIV4_SIUA]),
+	CLKDEV_CON_ID("siub_clk", &div4_clks[DIV4_SIUB]),
+
+	/* DIV6 clocks */
+	CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
+
+	/* MSTP32 clocks */
+	CLKDEV_CON_ID("tlb0", &mstp_clks[MSTP031]),
+	CLKDEV_CON_ID("ic0", &mstp_clks[MSTP030]),
+	CLKDEV_CON_ID("oc0", &mstp_clks[MSTP029]),
+	CLKDEV_CON_ID("uram0", &mstp_clks[MSTP028]),
+	CLKDEV_CON_ID("xymem0", &mstp_clks[MSTP026]),
+	CLKDEV_CON_ID("intc3", &mstp_clks[MSTP023]),
+	CLKDEV_CON_ID("intc0", &mstp_clks[MSTP022]),
+	CLKDEV_CON_ID("dmac0", &mstp_clks[MSTP021]),
+	CLKDEV_CON_ID("sh0", &mstp_clks[MSTP020]),
+	CLKDEV_CON_ID("hudi0", &mstp_clks[MSTP019]),
+	CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP017]),
+	CLKDEV_CON_ID("tmu_fck", &mstp_clks[MSTP015]),
+	CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[MSTP014]),
+	CLKDEV_CON_ID("rwdt0", &mstp_clks[MSTP013]),
+	CLKDEV_CON_ID("mfi0", &mstp_clks[MSTP011]),
+	CLKDEV_CON_ID("flctl0", &mstp_clks[MSTP010]),
+
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP007]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP006]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP005]),
+	CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP004]),
+
+	CLKDEV_CON_ID("sio0", &mstp_clks[MSTP003]),
+	CLKDEV_CON_ID("siof0", &mstp_clks[MSTP002]),
+	CLKDEV_CON_ID("siof1", &mstp_clks[MSTP001]),
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP109]),
+	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP108]),
+	CLKDEV_CON_ID("tpu0", &mstp_clks[MSTP225]),
+	CLKDEV_CON_ID("irda0", &mstp_clks[MSTP224]),
+	CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP218]),
+	CLKDEV_CON_ID("mmcif0", &mstp_clks[MSTP217]),
+	CLKDEV_CON_ID("sim0", &mstp_clks[MSTP216]),
+	CLKDEV_CON_ID("keysc0", &mstp_clks[MSTP214]),
+	CLKDEV_CON_ID("tsif0", &mstp_clks[MSTP213]),
+	CLKDEV_CON_ID("s3d40", &mstp_clks[MSTP212]),
+	CLKDEV_CON_ID("usbf0", &mstp_clks[MSTP211]),
+	CLKDEV_CON_ID("siu0", &mstp_clks[MSTP208]),
+	CLKDEV_CON_ID("jpu0", &mstp_clks[MSTP206]),
+	CLKDEV_CON_ID("vou0", &mstp_clks[MSTP205]),
+	CLKDEV_CON_ID("beu0", &mstp_clks[MSTP204]),
+	CLKDEV_CON_ID("ceu0", &mstp_clks[MSTP203]),
+	CLKDEV_CON_ID("veu0", &mstp_clks[MSTP202]),
+	CLKDEV_CON_ID("vpu0", &mstp_clks[MSTP201]),
+	CLKDEV_CON_ID("lcdc0", &mstp_clks[MSTP200]),
+};
+
+int __init arch_clk_init(void)
+{
+	int k, ret = 0;
+
+	/* autodetect extal or dll configuration */
+	if (__raw_readl(PLLCR) & 0x1000)
+		pll_clk.parent = &dll_clk;
+	else
+		pll_clk.parent = &extal_clk;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	return ret;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
new file mode 100644
index 0000000..ac98541
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
@@ -0,0 +1,282 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7366.c
+ *
+ * SH7366 clock framework support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <asm/clock.h>
+
+/* SH7366 registers */
+#define FRQCR		0xa4150000
+#define VCLKCR		0xa4150004
+#define SCLKACR		0xa4150008
+#define SCLKBCR		0xa415000c
+#define PLLCR		0xa4150024
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+#define DLLFRQ		0xa4150050
+
+/* Fixed 32 KHz root clock for RTC and Power Management purposes */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+struct clk extal_clk = {
+	.rate		= 33333333,
+};
+
+/* The dll block multiplies the 32khz r_clk, may be used instead of extal */
+static unsigned long dll_recalc(struct clk *clk)
+{
+	unsigned long mult;
+
+	if (__raw_readl(PLLCR) & 0x1000)
+		mult = __raw_readl(DLLFRQ);
+	else
+		mult = 0;
+
+	return clk->parent->rate * mult;
+}
+
+static struct sh_clk_ops dll_clk_ops = {
+	.recalc		= dll_recalc,
+};
+
+static struct clk dll_clk = {
+	.ops		= &dll_clk_ops,
+	.parent		= &r_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+	unsigned long div = 1;
+
+	if (__raw_readl(PLLCR) & 0x4000)
+		mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
+	else
+		div = 2;
+
+	return (clk->parent->rate * mult) / div;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&dll_clk,
+	&pll_clk,
+};
+
+static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
+static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+	.multipliers = multipliers,
+	.nr_multipliers = ARRAY_SIZE(multipliers),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
+       DIV4_SIUA, DIV4_SIUB, DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4(FRQCR, 20, 0x1fef, CLK_ENABLE_ON_INIT),
+	[DIV4_U] = DIV4(FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B3] = DIV4(FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4(FRQCR, 0, 0x1fff, 0),
+	[DIV4_SIUA] = DIV4(SCLKACR, 0, 0x1fff, 0),
+	[DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x1fff, 0),
+};
+
+enum { DIV6_V, DIV6_NR };
+
+struct clk div6_clks[DIV6_NR] = {
+	[DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
+};
+
+#define MSTP(_parent, _reg, _bit, _flags) \
+  SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
+
+enum { MSTP031, MSTP030, MSTP029, MSTP028, MSTP026,
+       MSTP023, MSTP022, MSTP021, MSTP020, MSTP019, MSTP018, MSTP017, MSTP016,
+       MSTP015, MSTP014, MSTP013, MSTP012, MSTP011, MSTP010,
+       MSTP007, MSTP006, MSTP005, MSTP002, MSTP001,
+       MSTP109, MSTP100,
+       MSTP227, MSTP226, MSTP224, MSTP223, MSTP222, MSTP218, MSTP217,
+       MSTP211, MSTP207, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+       MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	/* See page 52 of Datasheet V0.40: Overview -> Block Diagram */
+	[MSTP031] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
+	[MSTP030] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
+	[MSTP029] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
+	[MSTP028] = MSTP(&div4_clks[DIV4_SH], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
+	[MSTP026] = MSTP(&div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
+	[MSTP023] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
+	[MSTP022] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
+	[MSTP021] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
+	[MSTP020] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
+	[MSTP019] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
+	[MSTP017] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
+	[MSTP015] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
+	[MSTP014] = MSTP(&r_clk, MSTPCR0, 14, 0),
+	[MSTP013] = MSTP(&r_clk, MSTPCR0, 13, 0),
+	[MSTP011] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
+	[MSTP010] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
+	[MSTP007] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
+	[MSTP006] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 6, 0),
+	[MSTP005] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
+	[MSTP002] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
+	[MSTP001] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 1, 0),
+
+	[MSTP109] = MSTP(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
+
+	[MSTP227] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 27, 0),
+	[MSTP226] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 26, 0),
+	[MSTP224] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 24, 0),
+	[MSTP223] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 23, 0),
+	[MSTP222] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 22, 0),
+	[MSTP218] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 18, 0),
+	[MSTP217] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 17, 0),
+	[MSTP211] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 11, 0),
+	[MSTP207] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 7, CLK_ENABLE_ON_INIT),
+	[MSTP205] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
+	[MSTP204] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
+	[MSTP203] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
+	[MSTP202] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
+	[MSTP201] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
+	[MSTP200] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("dll_clk", &dll_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("siua_clk", &div4_clks[DIV4_SIUA]),
+	CLKDEV_CON_ID("siub_clk", &div4_clks[DIV4_SIUB]),
+
+	/* DIV6 clocks */
+	CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
+
+	/* MSTP32 clocks */
+	CLKDEV_CON_ID("tlb0", &mstp_clks[MSTP031]),
+	CLKDEV_CON_ID("ic0", &mstp_clks[MSTP030]),
+	CLKDEV_CON_ID("oc0", &mstp_clks[MSTP029]),
+	CLKDEV_CON_ID("rsmem0", &mstp_clks[MSTP028]),
+	CLKDEV_CON_ID("xymem0", &mstp_clks[MSTP026]),
+	CLKDEV_CON_ID("intc3", &mstp_clks[MSTP023]),
+	CLKDEV_CON_ID("intc0", &mstp_clks[MSTP022]),
+	CLKDEV_CON_ID("dmac0", &mstp_clks[MSTP021]),
+	CLKDEV_CON_ID("sh0", &mstp_clks[MSTP020]),
+	CLKDEV_CON_ID("hudi0", &mstp_clks[MSTP019]),
+	CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP017]),
+	CLKDEV_CON_ID("tmu_fck", &mstp_clks[MSTP015]),
+	CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[MSTP014]),
+	CLKDEV_CON_ID("rwdt0", &mstp_clks[MSTP013]),
+	CLKDEV_CON_ID("mfi0", &mstp_clks[MSTP011]),
+	CLKDEV_CON_ID("flctl0", &mstp_clks[MSTP010]),
+
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP007]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP006]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP005]),
+
+	CLKDEV_CON_ID("msiof0", &mstp_clks[MSTP002]),
+	CLKDEV_CON_ID("sbr0", &mstp_clks[MSTP001]),
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP109]),
+	CLKDEV_CON_ID("icb0", &mstp_clks[MSTP227]),
+	CLKDEV_CON_ID("meram0", &mstp_clks[MSTP226]),
+	CLKDEV_CON_ID("dacy1", &mstp_clks[MSTP224]),
+	CLKDEV_CON_ID("dacy0", &mstp_clks[MSTP223]),
+	CLKDEV_CON_ID("tsif0", &mstp_clks[MSTP222]),
+	CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP218]),
+	CLKDEV_CON_ID("mmcif0", &mstp_clks[MSTP217]),
+	CLKDEV_CON_ID("usbf0", &mstp_clks[MSTP211]),
+	CLKDEV_CON_ID("veu1", &mstp_clks[MSTP207]),
+	CLKDEV_CON_ID("vou0", &mstp_clks[MSTP205]),
+	CLKDEV_CON_ID("beu0", &mstp_clks[MSTP204]),
+	CLKDEV_CON_ID("ceu0", &mstp_clks[MSTP203]),
+	CLKDEV_CON_ID("veu0", &mstp_clks[MSTP202]),
+	CLKDEV_CON_ID("vpu0", &mstp_clks[MSTP201]),
+	CLKDEV_CON_ID("lcdc0", &mstp_clks[MSTP200]),
+};
+
+int __init arch_clk_init(void)
+{
+	int k, ret = 0;
+
+	/* autodetect extal or dll configuration */
+	if (__raw_readl(PLLCR) & 0x1000)
+		pll_clk.parent = &dll_clk;
+	else
+		pll_clk.parent = &extal_clk;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	return ret;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
new file mode 100644
index 0000000..8f07a1a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -0,0 +1,265 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+ *
+ * SH7722 clock framework support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/sh_clk.h>
+#include <asm/clock.h>
+#include <cpu/sh7722.h>
+
+/* SH7722 registers */
+#define FRQCR		0xa4150000
+#define VCLKCR		0xa4150004
+#define SCLKACR		0xa4150008
+#define SCLKBCR		0xa415000c
+#define IRDACLKCR	0xa4150018
+#define PLLCR		0xa4150024
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+#define DLLFRQ		0xa4150050
+
+/* Fixed 32 KHz root clock for RTC and Power Management purposes */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+struct clk extal_clk = {
+	.rate		= 33333333,
+};
+
+/* The dll block multiplies the 32khz r_clk, may be used instead of extal */
+static unsigned long dll_recalc(struct clk *clk)
+{
+	unsigned long mult;
+
+	if (__raw_readl(PLLCR) & 0x1000)
+		mult = __raw_readl(DLLFRQ);
+	else
+		mult = 0;
+
+	return clk->parent->rate * mult;
+}
+
+static struct sh_clk_ops dll_clk_ops = {
+	.recalc		= dll_recalc,
+};
+
+static struct clk dll_clk = {
+	.ops		= &dll_clk_ops,
+	.parent		= &r_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+	unsigned long div = 1;
+
+	if (__raw_readl(PLLCR) & 0x4000)
+		mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
+	else
+		div = 2;
+
+	return (clk->parent->rate * mult) / div;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&dll_clk,
+	&pll_clk,
+};
+
+static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
+static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+	.multipliers = multipliers,
+	.nr_multipliers = ARRAY_SIZE(multipliers),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
+
+enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P, DIV4_NR };
+
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4(FRQCR, 20, 0x1fef, CLK_ENABLE_ON_INIT),
+	[DIV4_U] = DIV4(FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B3] = DIV4(FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4(FRQCR, 0, 0x1fff, 0),
+};
+
+enum { DIV4_IRDA, DIV4_ENABLE_NR };
+
+struct clk div4_enable_clks[DIV4_ENABLE_NR] = {
+	[DIV4_IRDA] = DIV4(IRDACLKCR, 0, 0x1fff, 0),
+};
+
+enum { DIV4_SIUA, DIV4_SIUB, DIV4_REPARENT_NR };
+
+struct clk div4_reparent_clks[DIV4_REPARENT_NR] = {
+	[DIV4_SIUA] = DIV4(SCLKACR, 0, 0x1fff, 0),
+	[DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x1fff, 0),
+};
+
+enum { DIV6_V, DIV6_NR };
+
+struct clk div6_clks[DIV6_NR] = {
+	[DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
+};
+
+static struct clk mstp_clks[HWBLK_NR] = {
+	[HWBLK_URAM]  = SH_CLK_MSTP32(&div4_clks[DIV4_U], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
+	[HWBLK_XYMEM] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
+	[HWBLK_TMU]   = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
+	[HWBLK_CMT]   = SH_CLK_MSTP32(&r_clk,		  MSTPCR0, 14, 0),
+	[HWBLK_RWDT]  = SH_CLK_MSTP32(&r_clk,		  MSTPCR0, 13, 0),
+	[HWBLK_FLCTL] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
+	[HWBLK_SCIF0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
+	[HWBLK_SCIF1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 6, 0),
+	[HWBLK_SCIF2] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
+
+	[HWBLK_IIC]   = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
+	[HWBLK_RTC]   = SH_CLK_MSTP32(&r_clk,		  MSTPCR1, 8, 0),
+
+	[HWBLK_SDHI]  = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 18, 0),
+	[HWBLK_KEYSC] = SH_CLK_MSTP32(&r_clk,		  MSTPCR2, 14, 0),
+	[HWBLK_USBF]  = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 11, 0),
+	[HWBLK_2DG]   = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 9, 0),
+	[HWBLK_SIU]   = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 8, 0),
+	[HWBLK_JPU]   = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 6, 0),
+	[HWBLK_VOU]   = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
+	[HWBLK_BEU]   = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
+	[HWBLK_CEU]   = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
+	[HWBLK_VEU]   = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 2, 0),
+	[HWBLK_VPU]   = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 1, 0),
+	[HWBLK_LCDC]  = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 0, 0),
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("dll_clk", &dll_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("irda_clk", &div4_enable_clks[DIV4_IRDA]),
+	CLKDEV_CON_ID("siua_clk", &div4_reparent_clks[DIV4_SIUA]),
+	CLKDEV_CON_ID("siub_clk", &div4_reparent_clks[DIV4_SIUB]),
+
+	/* DIV6 clocks */
+	CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
+
+	/* MSTP clocks */
+	CLKDEV_CON_ID("uram0", &mstp_clks[HWBLK_URAM]),
+	CLKDEV_CON_ID("xymem0", &mstp_clks[HWBLK_XYMEM]),
+
+	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[HWBLK_TMU]),
+
+	CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[HWBLK_CMT]),
+	CLKDEV_DEV_ID("sh-wdt.0", &mstp_clks[HWBLK_RWDT]),
+	CLKDEV_CON_ID("flctl0", &mstp_clks[HWBLK_FLCTL]),
+
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
+
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[HWBLK_IIC]),
+	CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
+	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI]),
+	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[HWBLK_KEYSC]),
+	CLKDEV_CON_ID("usbf0", &mstp_clks[HWBLK_USBF]),
+	CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
+	CLKDEV_DEV_ID("siu-pcm-audio", &mstp_clks[HWBLK_SIU]),
+	CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
+	CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
+	CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU]),
+	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[HWBLK_CEU]),
+	CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU]),
+	CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
+	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[HWBLK_LCDC]),
+};
+
+int __init arch_clk_init(void)
+{
+	int k, ret = 0;
+
+	/* autodetect extal or dll configuration */
+	if (__raw_readl(PLLCR) & 0x1000)
+		pll_clk.parent = &dll_clk;
+	else
+		pll_clk.parent = &extal_clk;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div4_enable_register(div4_enable_clks,
+					DIV4_ENABLE_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div4_reparent_register(div4_reparent_clks,
+					DIV4_REPARENT_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
+
+	return ret;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
new file mode 100644
index 0000000..fe84422
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
@@ -0,0 +1,313 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+ *
+ * SH7723 clock framework support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/sh_clk.h>
+#include <asm/clock.h>
+#include <cpu/sh7723.h>
+
+/* SH7723 registers */
+#define FRQCR		0xa4150000
+#define VCLKCR		0xa4150004
+#define SCLKACR		0xa4150008
+#define SCLKBCR		0xa415000c
+#define IRDACLKCR	0xa4150018
+#define PLLCR		0xa4150024
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+#define DLLFRQ		0xa4150050
+
+/* Fixed 32 KHz root clock for RTC and Power Management purposes */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+struct clk extal_clk = {
+	.rate		= 33333333,
+};
+
+/* The dll multiplies the 32khz r_clk, may be used instead of extal */
+static unsigned long dll_recalc(struct clk *clk)
+{
+	unsigned long mult;
+
+	if (__raw_readl(PLLCR) & 0x1000)
+		mult = __raw_readl(DLLFRQ);
+	else
+		mult = 0;
+
+	return clk->parent->rate * mult;
+}
+
+static struct sh_clk_ops dll_clk_ops = {
+	.recalc		= dll_recalc,
+};
+
+static struct clk dll_clk = {
+	.ops		= &dll_clk_ops,
+	.parent		= &r_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+	unsigned long div = 1;
+
+	if (__raw_readl(PLLCR) & 0x4000)
+		mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
+	else
+		div = 2;
+
+	return (clk->parent->rate * mult) / div;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&dll_clk,
+	&pll_clk,
+};
+
+static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
+static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+	.multipliers = multipliers,
+	.nr_multipliers = ARRAY_SIZE(multipliers),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P, DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4(FRQCR, 20, 0x0dbf, CLK_ENABLE_ON_INIT),
+	[DIV4_U] = DIV4(FRQCR, 16, 0x0dbf, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(FRQCR, 12, 0x0dbf, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQCR, 8, 0x0dbf, CLK_ENABLE_ON_INIT),
+	[DIV4_B3] = DIV4(FRQCR, 4, 0x0db4, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4(FRQCR, 0, 0x0dbf, 0),
+};
+
+enum { DIV4_IRDA, DIV4_ENABLE_NR };
+
+struct clk div4_enable_clks[DIV4_ENABLE_NR] = {
+	[DIV4_IRDA] = DIV4(IRDACLKCR, 0, 0x0dbf, 0),
+};
+
+enum { DIV4_SIUA, DIV4_SIUB, DIV4_REPARENT_NR };
+
+struct clk div4_reparent_clks[DIV4_REPARENT_NR] = {
+	[DIV4_SIUA] = DIV4(SCLKACR, 0, 0x0dbf, 0),
+	[DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x0dbf, 0),
+};
+enum { DIV6_V, DIV6_NR };
+
+struct clk div6_clks[DIV6_NR] = {
+	[DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
+};
+
+static struct clk mstp_clks[] = {
+	/* See page 60 of Datasheet V1.0: Overview -> Block Diagram */
+	[HWBLK_TLB]    = SH_CLK_MSTP32(&div4_clks[DIV4_I],  MSTPCR0, 31, CLK_ENABLE_ON_INIT),
+	[HWBLK_IC]     = SH_CLK_MSTP32(&div4_clks[DIV4_I],  MSTPCR0, 30, CLK_ENABLE_ON_INIT),
+	[HWBLK_OC]     = SH_CLK_MSTP32(&div4_clks[DIV4_I],  MSTPCR0, 29, CLK_ENABLE_ON_INIT),
+	[HWBLK_L2C]    = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
+	[HWBLK_ILMEM]  = SH_CLK_MSTP32(&div4_clks[DIV4_I],  MSTPCR0, 27, CLK_ENABLE_ON_INIT),
+	[HWBLK_FPU]    = SH_CLK_MSTP32(&div4_clks[DIV4_I],  MSTPCR0, 24, CLK_ENABLE_ON_INIT),
+	[HWBLK_INTC]   = SH_CLK_MSTP32(&div4_clks[DIV4_I],  MSTPCR0, 22, CLK_ENABLE_ON_INIT),
+	[HWBLK_DMAC0]  = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR0, 21, 0),
+	[HWBLK_SHYWAY] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 20, CLK_ENABLE_ON_INIT),
+	[HWBLK_HUDI]   = SH_CLK_MSTP32(&div4_clks[DIV4_P],  MSTPCR0, 19, 0),
+	[HWBLK_UBC]    = SH_CLK_MSTP32(&div4_clks[DIV4_I],  MSTPCR0, 17, 0),
+	[HWBLK_TMU0]   = SH_CLK_MSTP32(&div4_clks[DIV4_P],  MSTPCR0, 15, 0),
+	[HWBLK_CMT]    = SH_CLK_MSTP32(&r_clk,		    MSTPCR0, 14, 0),
+	[HWBLK_RWDT]   = SH_CLK_MSTP32(&r_clk,		    MSTPCR0, 13, 0),
+	[HWBLK_DMAC1]  = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR0, 12, 0),
+	[HWBLK_TMU1]   = SH_CLK_MSTP32(&div4_clks[DIV4_P],  MSTPCR0, 11, 0),
+	[HWBLK_FLCTL]  = SH_CLK_MSTP32(&div4_clks[DIV4_P],  MSTPCR0, 10, 0),
+	[HWBLK_SCIF0]  = SH_CLK_MSTP32(&div4_clks[DIV4_P],  MSTPCR0, 9, 0),
+	[HWBLK_SCIF1]  = SH_CLK_MSTP32(&div4_clks[DIV4_P],  MSTPCR0, 8, 0),
+	[HWBLK_SCIF2]  = SH_CLK_MSTP32(&div4_clks[DIV4_P],  MSTPCR0, 7, 0),
+	[HWBLK_SCIF3]  = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR0, 6, 0),
+	[HWBLK_SCIF4]  = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR0, 5, 0),
+	[HWBLK_SCIF5]  = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR0, 4, 0),
+	[HWBLK_MSIOF0] = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR0, 2, 0),
+	[HWBLK_MSIOF1] = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR0, 1, 0),
+	[HWBLK_MERAM]  = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 0, 0),
+
+	[HWBLK_IIC]    = SH_CLK_MSTP32(&div4_clks[DIV4_P],  MSTPCR1, 9, 0),
+	[HWBLK_RTC]    = SH_CLK_MSTP32(&r_clk,		    MSTPCR1, 8, 0),
+
+	[HWBLK_ATAPI]  = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR2, 28, 0),
+	[HWBLK_ADC]    = SH_CLK_MSTP32(&div4_clks[DIV4_P],  MSTPCR2, 27, 0),
+	[HWBLK_TPU]    = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR2, 25, 0),
+	[HWBLK_IRDA]   = SH_CLK_MSTP32(&div4_clks[DIV4_P],  MSTPCR2, 24, 0),
+	[HWBLK_TSIF]   = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR2, 22, 0),
+	[HWBLK_ICB]    = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR2, 21, CLK_ENABLE_ON_INIT),
+	[HWBLK_SDHI0]  = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR2, 18, 0),
+	[HWBLK_SDHI1]  = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR2, 17, 0),
+	[HWBLK_KEYSC]  = SH_CLK_MSTP32(&r_clk,		    MSTPCR2, 14, 0),
+	[HWBLK_USB]    = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR2, 11, 0),
+	[HWBLK_2DG]    = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR2, 10, 0),
+	[HWBLK_SIU]    = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR2, 8, 0),
+	[HWBLK_VEU2H1] = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR2, 6, 0),
+	[HWBLK_VOU]    = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR2, 5, 0),
+	[HWBLK_BEU]    = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR2, 4, 0),
+	[HWBLK_CEU]    = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR2, 3, 0),
+	[HWBLK_VEU2H0] = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR2, 2, 0),
+	[HWBLK_VPU]    = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR2, 1, 0),
+	[HWBLK_LCDC]   = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR2, 0, 0),
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("dll_clk", &dll_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("irda_clk", &div4_enable_clks[DIV4_IRDA]),
+	CLKDEV_CON_ID("siua_clk", &div4_reparent_clks[DIV4_SIUA]),
+	CLKDEV_CON_ID("siub_clk", &div4_reparent_clks[DIV4_SIUB]),
+
+	/* DIV6 clocks */
+	CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
+
+	/* MSTP clocks */
+	CLKDEV_CON_ID("tlb0", &mstp_clks[HWBLK_TLB]),
+	CLKDEV_CON_ID("ic0", &mstp_clks[HWBLK_IC]),
+	CLKDEV_CON_ID("oc0", &mstp_clks[HWBLK_OC]),
+	CLKDEV_CON_ID("l2c0", &mstp_clks[HWBLK_L2C]),
+	CLKDEV_CON_ID("ilmem0", &mstp_clks[HWBLK_ILMEM]),
+	CLKDEV_CON_ID("fpu0", &mstp_clks[HWBLK_FPU]),
+	CLKDEV_CON_ID("intc0", &mstp_clks[HWBLK_INTC]),
+	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[HWBLK_DMAC0]),
+	CLKDEV_CON_ID("sh0", &mstp_clks[HWBLK_SHYWAY]),
+	CLKDEV_CON_ID("hudi0", &mstp_clks[HWBLK_HUDI]),
+	CLKDEV_CON_ID("ubc0", &mstp_clks[HWBLK_UBC]),
+	CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[HWBLK_CMT]),
+	CLKDEV_DEV_ID("sh-wdt.0", &mstp_clks[HWBLK_RWDT]),
+	CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[HWBLK_DMAC1]),
+	CLKDEV_CON_ID("flctl0", &mstp_clks[HWBLK_FLCTL]),
+	CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[HWBLK_MSIOF0]),
+	CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[HWBLK_MSIOF1]),
+	CLKDEV_DEV_ID("sh_mobile_meram.0", &mstp_clks[HWBLK_MERAM]),
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[HWBLK_IIC]),
+	CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
+	CLKDEV_CON_ID("atapi0", &mstp_clks[HWBLK_ATAPI]),
+	CLKDEV_CON_ID("adc0", &mstp_clks[HWBLK_ADC]),
+	CLKDEV_CON_ID("tpu0", &mstp_clks[HWBLK_TPU]),
+	CLKDEV_CON_ID("irda0", &mstp_clks[HWBLK_IRDA]),
+	CLKDEV_CON_ID("tsif0", &mstp_clks[HWBLK_TSIF]),
+	CLKDEV_CON_ID("icb0", &mstp_clks[HWBLK_ICB]),
+	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI0]),
+	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[HWBLK_SDHI1]),
+	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[HWBLK_KEYSC]),
+	CLKDEV_CON_ID("usb0", &mstp_clks[HWBLK_USB]),
+	CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
+	CLKDEV_DEV_ID("siu-pcm-audio", &mstp_clks[HWBLK_SIU]),
+	CLKDEV_CON_ID("veu1", &mstp_clks[HWBLK_VEU2H1]),
+	CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
+	CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU]),
+	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[HWBLK_CEU]),
+	CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU2H0]),
+	CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
+
+	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[HWBLK_TMU0]),
+	CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[HWBLK_TMU1]),
+
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
+	CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[HWBLK_SCIF3]),
+	CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[HWBLK_SCIF4]),
+	CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[HWBLK_SCIF5]),
+
+	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[HWBLK_LCDC]),
+};
+
+int __init arch_clk_init(void)
+{
+	int k, ret = 0;
+
+	/* autodetect extal or dll configuration */
+	if (__raw_readl(PLLCR) & 0x1000)
+		pll_clk.parent = &dll_clk;
+	else
+		pll_clk.parent = &extal_clk;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret |= clk_register(main_clks[k]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div4_enable_register(div4_enable_clks,
+					DIV4_ENABLE_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div4_reparent_register(div4_reparent_clks,
+					DIV4_REPARENT_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
+
+	return ret;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
new file mode 100644
index 0000000..f27c618
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -0,0 +1,379 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+ *
+ * SH7724 clock framework support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/sh_clk.h>
+#include <asm/clock.h>
+#include <cpu/sh7724.h>
+
+/* SH7724 registers */
+#define FRQCRA		0xa4150000
+#define FRQCRB		0xa4150004
+#define VCLKCR		0xa4150048
+#define FCLKACR		0xa4150008
+#define FCLKBCR		0xa415000c
+#define IRDACLKCR	0xa4150018
+#define PLLCR		0xa4150024
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+#define SPUCLKCR	0xa415003c
+#define FLLFRQ		0xa4150050
+#define LSTATS		0xa4150060
+
+/* Fixed 32 KHz root clock for RTC and Power Management purposes */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 33333333,
+};
+
+/* The fll multiplies the 32khz r_clk, may be used instead of extal */
+static unsigned long fll_recalc(struct clk *clk)
+{
+	unsigned long mult = 0;
+	unsigned long div = 1;
+
+	if (__raw_readl(PLLCR) & 0x1000)
+		mult = __raw_readl(FLLFRQ) & 0x3ff;
+
+	if (__raw_readl(FLLFRQ) & 0x4000)
+		div = 2;
+
+	return (clk->parent->rate * mult) / div;
+}
+
+static struct sh_clk_ops fll_clk_ops = {
+	.recalc		= fll_recalc,
+};
+
+static struct clk fll_clk = {
+	.ops		= &fll_clk_ops,
+	.parent		= &r_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+
+	if (__raw_readl(PLLCR) & 0x4000)
+		mult = (((__raw_readl(FRQCRA) >> 24) & 0x3f) + 1) * 2;
+
+	return clk->parent->rate * mult;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+/* A fixed divide-by-3 block use by the div6 clocks */
+static unsigned long div3_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 3;
+}
+
+static struct sh_clk_ops div3_clk_ops = {
+	.recalc		= div3_recalc,
+};
+
+static struct clk div3_clk = {
+	.ops		= &div3_clk_ops,
+	.parent		= &pll_clk,
+};
+
+/* External input clock (pin name: FSIMCKA/FSIMCKB/DV_CLKI ) */
+struct clk sh7724_fsimcka_clk = {
+};
+
+struct clk sh7724_fsimckb_clk = {
+};
+
+struct clk sh7724_dv_clki = {
+};
+
+static struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&fll_clk,
+	&pll_clk,
+	&div3_clk,
+	&sh7724_fsimcka_clk,
+	&sh7724_fsimckb_clk,
+	&sh7724_dv_clki,
+};
+
+static void div4_kick(struct clk *clk)
+{
+	unsigned long value;
+
+	/* set KICK bit in FRQCRA to update hardware setting */
+	value = __raw_readl(FRQCRA);
+	value |= (1 << 31);
+	__raw_writel(value, FRQCRA);
+}
+
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 0, 24, 32, 36, 48, 0, 72 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+	.kick = div4_kick,
+};
+
+enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_P, DIV4_M1, DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4(FRQCRA, 20, 0x2f7d, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(FRQCRA, 12, 0x2f7c, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQCRA, 8, 0x2f7c, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4(FRQCRA, 0, 0x2f7c, 0),
+	[DIV4_M1] = DIV4(FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT),
+};
+
+enum { DIV6_V, DIV6_I, DIV6_S, DIV6_FA, DIV6_FB, DIV6_NR };
+
+/* Indices are important - they are the actual src selecting values */
+static struct clk *common_parent[] = {
+	[0] = &div3_clk,
+	[1] = NULL,
+};
+
+static struct clk *vclkcr_parent[8] = {
+	[0] = &div3_clk,
+	[2] = &sh7724_dv_clki,
+	[4] = &extal_clk,
+};
+
+static struct clk *fclkacr_parent[] = {
+	[0] = &div3_clk,
+	[1] = NULL,
+	[2] = &sh7724_fsimcka_clk,
+	[3] = NULL,
+};
+
+static struct clk *fclkbcr_parent[] = {
+	[0] = &div3_clk,
+	[1] = NULL,
+	[2] = &sh7724_fsimckb_clk,
+	[3] = NULL,
+};
+
+static struct clk div6_clks[DIV6_NR] = {
+	[DIV6_V] = SH_CLK_DIV6_EXT(VCLKCR, 0,
+			vclkcr_parent, ARRAY_SIZE(vclkcr_parent), 12, 3),
+	[DIV6_I] = SH_CLK_DIV6_EXT(IRDACLKCR, 0,
+			common_parent, ARRAY_SIZE(common_parent), 6, 1),
+	[DIV6_S] = SH_CLK_DIV6_EXT(SPUCLKCR, CLK_ENABLE_ON_INIT,
+			common_parent, ARRAY_SIZE(common_parent), 6, 1),
+	[DIV6_FA] = SH_CLK_DIV6_EXT(FCLKACR, 0,
+				      fclkacr_parent, ARRAY_SIZE(fclkacr_parent), 6, 2),
+	[DIV6_FB] = SH_CLK_DIV6_EXT(FCLKBCR, 0,
+				      fclkbcr_parent, ARRAY_SIZE(fclkbcr_parent), 6, 2),
+};
+
+static struct clk mstp_clks[HWBLK_NR] = {
+	[HWBLK_TLB] = SH_CLK_MSTP32(&div4_clks[DIV4_I],	    MSTPCR0, 31, CLK_ENABLE_ON_INIT),
+	[HWBLK_IC] = SH_CLK_MSTP32(&div4_clks[DIV4_I],	    MSTPCR0, 30, CLK_ENABLE_ON_INIT),
+	[HWBLK_OC] = SH_CLK_MSTP32(&div4_clks[DIV4_I],	    MSTPCR0, 29, CLK_ENABLE_ON_INIT),
+	[HWBLK_RSMEM] = SH_CLK_MSTP32(&div4_clks[DIV4_B],   MSTPCR0, 28, CLK_ENABLE_ON_INIT),
+	[HWBLK_ILMEM] = SH_CLK_MSTP32(&div4_clks[DIV4_I],   MSTPCR0, 27, CLK_ENABLE_ON_INIT),
+	[HWBLK_L2C] = SH_CLK_MSTP32(&div4_clks[DIV4_SH],    MSTPCR0, 26, CLK_ENABLE_ON_INIT),
+	[HWBLK_FPU] = SH_CLK_MSTP32(&div4_clks[DIV4_I],	    MSTPCR0, 24, CLK_ENABLE_ON_INIT),
+	[HWBLK_INTC] = SH_CLK_MSTP32(&div4_clks[DIV4_P],    MSTPCR0, 22, CLK_ENABLE_ON_INIT),
+	[HWBLK_DMAC0] = SH_CLK_MSTP32(&div4_clks[DIV4_B],   MSTPCR0, 21, 0),
+	[HWBLK_SHYWAY] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 20, CLK_ENABLE_ON_INIT),
+	[HWBLK_HUDI] = SH_CLK_MSTP32(&div4_clks[DIV4_P],    MSTPCR0, 19, 0),
+	[HWBLK_UBC] = SH_CLK_MSTP32(&div4_clks[DIV4_I],     MSTPCR0, 17, 0),
+	[HWBLK_TMU0] = SH_CLK_MSTP32(&div4_clks[DIV4_P],    MSTPCR0, 15, 0),
+	[HWBLK_CMT] = SH_CLK_MSTP32(&r_clk,		    MSTPCR0, 14, 0),
+	[HWBLK_RWDT] = SH_CLK_MSTP32(&r_clk,		    MSTPCR0, 13, 0),
+	[HWBLK_DMAC1] = SH_CLK_MSTP32(&div4_clks[DIV4_B],   MSTPCR0, 12, 0),
+	[HWBLK_TMU1] = SH_CLK_MSTP32(&div4_clks[DIV4_P],    MSTPCR0, 10, 0),
+	[HWBLK_SCIF0] = SH_CLK_MSTP32(&div4_clks[DIV4_P],   MSTPCR0, 9, 0),
+	[HWBLK_SCIF1] = SH_CLK_MSTP32(&div4_clks[DIV4_P],   MSTPCR0, 8, 0),
+	[HWBLK_SCIF2] = SH_CLK_MSTP32(&div4_clks[DIV4_P],   MSTPCR0, 7, 0),
+	[HWBLK_SCIF3] = SH_CLK_MSTP32(&div4_clks[DIV4_B],   MSTPCR0, 6, 0),
+	[HWBLK_SCIF4] = SH_CLK_MSTP32(&div4_clks[DIV4_B],   MSTPCR0, 5, 0),
+	[HWBLK_SCIF5] = SH_CLK_MSTP32(&div4_clks[DIV4_B],   MSTPCR0, 4, 0),
+	[HWBLK_MSIOF0] = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR0, 2, 0),
+	[HWBLK_MSIOF1] = SH_CLK_MSTP32(&div4_clks[DIV4_B],  MSTPCR0, 1, 0),
+
+	[HWBLK_KEYSC] = SH_CLK_MSTP32(&r_clk,		    MSTPCR1, 12, 0),
+	[HWBLK_RTC] = SH_CLK_MSTP32(&r_clk,		    MSTPCR1, 11, 0),
+	[HWBLK_IIC0] = SH_CLK_MSTP32(&div4_clks[DIV4_P],    MSTPCR1, 9, 0),
+	[HWBLK_IIC1] = SH_CLK_MSTP32(&div4_clks[DIV4_P],    MSTPCR1, 8, 0),
+
+	[HWBLK_MMC] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	    MSTPCR2, 29, 0),
+	[HWBLK_ETHER] = SH_CLK_MSTP32(&div4_clks[DIV4_B],   MSTPCR2, 28, 0),
+	[HWBLK_ATAPI] = SH_CLK_MSTP32(&div4_clks[DIV4_B],   MSTPCR2, 26, 0),
+	[HWBLK_TPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	    MSTPCR2, 25, 0),
+	[HWBLK_IRDA] = SH_CLK_MSTP32(&div4_clks[DIV4_P],    MSTPCR2, 24, 0),
+	[HWBLK_TSIF] = SH_CLK_MSTP32(&div4_clks[DIV4_B],    MSTPCR2, 22, 0),
+	[HWBLK_USB1] = SH_CLK_MSTP32(&div4_clks[DIV4_B],    MSTPCR2, 21, 0),
+	[HWBLK_USB0] = SH_CLK_MSTP32(&div4_clks[DIV4_B],    MSTPCR2, 20, 0),
+	[HWBLK_2DG] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	    MSTPCR2, 19, 0),
+	[HWBLK_SDHI0] = SH_CLK_MSTP32(&div4_clks[DIV4_B],   MSTPCR2, 18, 0),
+	[HWBLK_SDHI1] = SH_CLK_MSTP32(&div4_clks[DIV4_B],   MSTPCR2, 17, 0),
+	[HWBLK_VEU1] = SH_CLK_MSTP32(&div4_clks[DIV4_B],    MSTPCR2, 15, 0),
+	[HWBLK_CEU1] = SH_CLK_MSTP32(&div4_clks[DIV4_B],    MSTPCR2, 13, 0),
+	[HWBLK_BEU1] = SH_CLK_MSTP32(&div4_clks[DIV4_B],    MSTPCR2, 12, 0),
+	[HWBLK_2DDMAC] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR2, 10, 0),
+	[HWBLK_SPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	    MSTPCR2, 9, 0),
+	[HWBLK_JPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	    MSTPCR2, 6, 0),
+	[HWBLK_VOU] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	    MSTPCR2, 5, 0),
+	[HWBLK_BEU0] = SH_CLK_MSTP32(&div4_clks[DIV4_B],    MSTPCR2, 4, 0),
+	[HWBLK_CEU0] = SH_CLK_MSTP32(&div4_clks[DIV4_B],    MSTPCR2, 3, 0),
+	[HWBLK_VEU0] = SH_CLK_MSTP32(&div4_clks[DIV4_B],    MSTPCR2, 2, 0),
+	[HWBLK_VPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	    MSTPCR2, 1, 0),
+	[HWBLK_LCDC] = SH_CLK_MSTP32(&div4_clks[DIV4_B],    MSTPCR2, 0, 0),
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("fll_clk", &fll_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+	CLKDEV_CON_ID("div3_clk", &div3_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("vpu_clk", &div4_clks[DIV4_M1]),
+
+	/* DIV6 clocks */
+	CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
+	CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FA]),
+	CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FB]),
+	CLKDEV_CON_ID("irda_clk", &div6_clks[DIV6_I]),
+	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_S]),
+
+	/* MSTP clocks */
+	CLKDEV_CON_ID("tlb0", &mstp_clks[HWBLK_TLB]),
+	CLKDEV_CON_ID("ic0", &mstp_clks[HWBLK_IC]),
+	CLKDEV_CON_ID("oc0", &mstp_clks[HWBLK_OC]),
+	CLKDEV_CON_ID("rs0", &mstp_clks[HWBLK_RSMEM]),
+	CLKDEV_CON_ID("ilmem0", &mstp_clks[HWBLK_ILMEM]),
+	CLKDEV_CON_ID("l2c0", &mstp_clks[HWBLK_L2C]),
+	CLKDEV_CON_ID("fpu0", &mstp_clks[HWBLK_FPU]),
+	CLKDEV_CON_ID("intc0", &mstp_clks[HWBLK_INTC]),
+	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[HWBLK_DMAC0]),
+	CLKDEV_CON_ID("sh0", &mstp_clks[HWBLK_SHYWAY]),
+	CLKDEV_CON_ID("hudi0", &mstp_clks[HWBLK_HUDI]),
+	CLKDEV_CON_ID("ubc0", &mstp_clks[HWBLK_UBC]),
+
+	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[HWBLK_TMU0]),
+	CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[HWBLK_TMU1]),
+
+	CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[HWBLK_CMT]),
+	CLKDEV_DEV_ID("sh-wdt.0", &mstp_clks[HWBLK_RWDT]),
+	CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[HWBLK_DMAC1]),
+
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[HWBLK_SCIF3]),
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[HWBLK_SCIF4]),
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[HWBLK_SCIF5]),
+
+	CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[HWBLK_MSIOF0]),
+	CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[HWBLK_MSIOF1]),
+	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[HWBLK_KEYSC]),
+	CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[HWBLK_IIC0]),
+	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[HWBLK_IIC1]),
+	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[HWBLK_MMC]),
+	CLKDEV_DEV_ID("sh7724-ether.0", &mstp_clks[HWBLK_ETHER]),
+	CLKDEV_CON_ID("atapi0", &mstp_clks[HWBLK_ATAPI]),
+	CLKDEV_CON_ID("tpu0", &mstp_clks[HWBLK_TPU]),
+	CLKDEV_CON_ID("irda0", &mstp_clks[HWBLK_IRDA]),
+	CLKDEV_CON_ID("tsif0", &mstp_clks[HWBLK_TSIF]),
+	CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[HWBLK_USB1]),
+	CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[HWBLK_USB0]),
+	CLKDEV_CON_ID("usb1", &mstp_clks[HWBLK_USB1]),
+	CLKDEV_CON_ID("usb0", &mstp_clks[HWBLK_USB0]),
+	CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
+	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI0]),
+	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[HWBLK_SDHI1]),
+	CLKDEV_CON_ID("veu1", &mstp_clks[HWBLK_VEU1]),
+	CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]),
+	CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]),
+	CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]),
+	CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]),
+	CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
+	CLKDEV_DEV_ID("sh-vou", &mstp_clks[HWBLK_VOU]),
+	CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]),
+	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[HWBLK_CEU0]),
+	CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU0]),
+	CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
+	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[HWBLK_LCDC]),
+};
+
+int __init arch_clk_init(void)
+{
+	int k, ret = 0;
+
+	/* autodetect extal or fll configuration */
+	if (__raw_readl(PLLCR) & 0x1000)
+		pll_clk.parent = &fll_clk;
+	else
+		pll_clk.parent = &extal_clk;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
+
+	return ret;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7734.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
new file mode 100644
index 0000000..354dcac
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
@@ -0,0 +1,259 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7734.c
+ *
+ * Clock framework for SH7734
+ *
+ * Copyright (C) 2011, 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * Copyright (C) 2011, 2012 Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/delay.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+
+static struct clk extal_clk = {
+	.rate       = 33333333,
+};
+
+#define MODEMR          (0xFFCC0020)
+#define MODEMR_MASK     (0x6)
+#define MODEMR_533MHZ   (0x2)
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	int mode = 12;
+	u32 r = __raw_readl(MODEMR);
+
+	if ((r & MODEMR_MASK) & MODEMR_533MHZ)
+		mode = 16;
+
+	return clk->parent->rate * mode;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops        = &pll_clk_ops,
+	.parent     = &extal_clk,
+	.flags      = CLK_ENABLE_ON_INIT,
+};
+
+static struct clk *main_clks[] = {
+	&extal_clk,
+	&pll_clk,
+};
+
+static int multipliers[] = { 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
+static int divisors[] = { 1, 3, 2, 3, 4, 6, 8, 9, 12, 16, 18, 24 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+	.multipliers = multipliers,
+	.nr_multipliers = ARRAY_SIZE(multipliers),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I, DIV4_S, DIV4_B, DIV4_M, DIV4_S1, DIV4_P, DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+	SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4(FRQMR1, 28, 0x0003, CLK_ENABLE_ON_INIT),
+	[DIV4_S] = DIV4(FRQMR1, 20, 0x000C, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQMR1, 16, 0x0140, CLK_ENABLE_ON_INIT),
+	[DIV4_M] = DIV4(FRQMR1, 12, 0x0004, CLK_ENABLE_ON_INIT),
+	[DIV4_S1] = DIV4(FRQMR1, 4, 0x0030, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4(FRQMR1, 0, 0x0140, CLK_ENABLE_ON_INIT),
+};
+
+#define MSTPCR0	0xFFC80030
+#define MSTPCR1	0xFFC80034
+#define MSTPCR3	0xFFC8003C
+
+enum {
+	MSTP030, MSTP029, /* IIC */
+	MSTP026, MSTP025, MSTP024, /* SCIF */
+	MSTP023,
+	MSTP022, MSTP021,
+	MSTP019, /* HSCIF */
+	MSTP016, MSTP015, MSTP014, /* TMU / TIMER */
+	MSTP012, MSTP011, MSTP010, MSTP009, MSTP008, /* SSI */
+	MSTP007, /* HSPI */
+	MSTP115, /* ADMAC */
+	MSTP114, /* GETHER */
+	MSTP111, /* DMAC */
+	MSTP109, /* VIDEOIN1 */
+	MSTP108, /* VIDEOIN0 */
+	MSTP107, /* RGPVBG */
+	MSTP106, /* 2DG */
+	MSTP103, /* VIEW */
+	MSTP100, /* USB */
+	MSTP331, /* MMC */
+	MSTP330, /* MIMLB */
+	MSTP323, /* SDHI0 */
+	MSTP322, /* SDHI1 */
+	MSTP321, /* SDHI2 */
+	MSTP320, /* RQSPI */
+	MSTP319, /* SRC0 */
+	MSTP318, /* SRC1 */
+	MSTP317, /* RSPI */
+	MSTP316, /* RCAN0 */
+	MSTP315, /* RCAN1 */
+	MSTP314, /* FLTCL */
+	MSTP313, /* ADC */
+	MSTP312, /* MTU */
+	MSTP304, /* IE-BUS */
+	MSTP303, /* RTC */
+	MSTP302, /* HIF */
+	MSTP301, /* STIF0 */
+	MSTP300, /* STIF1 */
+	MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	/* MSTPCR0 */
+	[MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0),
+	[MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0),
+	[MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
+	[MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
+	[MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
+	[MSTP023] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
+	[MSTP022] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
+	[MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
+	[MSTP019] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
+	[MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0),
+	[MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
+	[MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0),
+	[MSTP012] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 12, 0),
+	[MSTP011] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
+	[MSTP010] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
+	[MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
+	[MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
+	[MSTP007] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
+
+	/* MSTPCR1 */
+	[MSTP115] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 15, 0),
+	[MSTP114] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 14, 0),
+	[MSTP111] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 11, 0),
+	[MSTP109] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
+	[MSTP108] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 8, 0),
+	[MSTP107] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 7, 0),
+	[MSTP106] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 6, 0),
+	[MSTP103] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 3, 0),
+	[MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 0, 0),
+
+	/* MSTPCR3 */
+	[MSTP331] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 31, 0),
+	[MSTP330] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 30, 0),
+	[MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 23, 0),
+	[MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0),
+	[MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0),
+	[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0),
+	[MSTP319] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 19, 0),
+	[MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 18, 0),
+	[MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 17, 0),
+	[MSTP316] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 16, 0),
+	[MSTP315] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 15, 0),
+	[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 14, 0),
+	[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 13, 0),
+	[MSTP312] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 12, 0),
+	[MSTP304] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3,  4, 0),
+	[MSTP303] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3,  3, 0),
+	[MSTP302] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3,  2, 0),
+	[MSTP301] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3,  1, 0),
+	[MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3,  0, 0),
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_S]),
+	CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_M]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("shyway_clk1", &div4_clks[DIV4_S1]),
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+
+	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("i2c-sh7734.0", &mstp_clks[MSTP030]),
+	CLKDEV_DEV_ID("i2c-sh7734.1", &mstp_clks[MSTP029]),
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP026]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP024]),
+	CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP023]),
+	CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP022]),
+	CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP021]),
+	CLKDEV_CON_ID("hscif", &mstp_clks[MSTP019]),
+	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]),
+	CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]),
+	CLKDEV_ICK_ID("fck", "sh-tmu.2", &mstp_clks[MSTP014]),
+	CLKDEV_CON_ID("ssi0", &mstp_clks[MSTP012]),
+	CLKDEV_CON_ID("ssi1", &mstp_clks[MSTP011]),
+	CLKDEV_CON_ID("ssi2", &mstp_clks[MSTP010]),
+	CLKDEV_CON_ID("ssi3", &mstp_clks[MSTP009]),
+	CLKDEV_CON_ID("sss", &mstp_clks[MSTP008]),
+	CLKDEV_CON_ID("hspi", &mstp_clks[MSTP007]),
+	CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP100]),
+	CLKDEV_CON_ID("videoin0", &mstp_clks[MSTP109]),
+	CLKDEV_CON_ID("videoin1", &mstp_clks[MSTP108]),
+	CLKDEV_CON_ID("rgpvg", &mstp_clks[MSTP107]),
+	CLKDEV_CON_ID("2dg", &mstp_clks[MSTP106]),
+	CLKDEV_CON_ID("view", &mstp_clks[MSTP103]),
+
+	CLKDEV_CON_ID("mmc0", &mstp_clks[MSTP331]),
+	CLKDEV_CON_ID("mimlb0", &mstp_clks[MSTP330]),
+	CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP323]),
+	CLKDEV_CON_ID("sdhi1", &mstp_clks[MSTP322]),
+	CLKDEV_CON_ID("sdhi2", &mstp_clks[MSTP321]),
+	CLKDEV_CON_ID("rqspi0", &mstp_clks[MSTP320]),
+	CLKDEV_CON_ID("src0", &mstp_clks[MSTP319]),
+	CLKDEV_CON_ID("src1", &mstp_clks[MSTP318]),
+	CLKDEV_CON_ID("rsp0", &mstp_clks[MSTP317]),
+	CLKDEV_CON_ID("rcan0", &mstp_clks[MSTP316]),
+	CLKDEV_CON_ID("rcan1", &mstp_clks[MSTP315]),
+	CLKDEV_CON_ID("fltcl0", &mstp_clks[MSTP314]),
+	CLKDEV_CON_ID("adc0", &mstp_clks[MSTP313]),
+	CLKDEV_CON_ID("mtu0", &mstp_clks[MSTP312]),
+	CLKDEV_CON_ID("iebus0", &mstp_clks[MSTP304]),
+	CLKDEV_DEV_ID("sh7734-gether.0", &mstp_clks[MSTP114]),
+	CLKDEV_CON_ID("rtc0", &mstp_clks[MSTP303]),
+	CLKDEV_CON_ID("hif0", &mstp_clks[MSTP302]),
+	CLKDEV_CON_ID("stif0", &mstp_clks[MSTP301]),
+	CLKDEV_CON_ID("stif1", &mstp_clks[MSTP300]),
+};
+
+int __init arch_clk_init(void)
+{
+	int i, ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(main_clks); i++)
+		ret |= clk_register(main_clks[i]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
+			&div4_table);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	return ret;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
new file mode 100644
index 0000000..b10af2a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
@@ -0,0 +1,155 @@
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh7757.c
+ *
+ * SH7757 support for the clock framework
+ *
+ *  Copyright (C) 2009-2010  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 48000000,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	int multiplier;
+
+	multiplier = test_mode_pin(MODE_PIN0) ? 24 : 16;
+
+	return clk->parent->rate * multiplier;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static struct clk *clks[] = {
+	&extal_clk,
+	&pll_clk,
+};
+
+static unsigned int div2[] = { 1, 1, 2, 1, 1, 4, 1, 6,
+			       1, 1, 1, 16, 1, 24, 1, 1 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I, DIV4_SH, DIV4_P, DIV4_NR };
+
+#define DIV4(_bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, FRQCR, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+	/*
+	 * P clock is always enable, because some P clock modules is used
+	 * by Host PC.
+	 */
+	[DIV4_P] = DIV4(0, 0x2800, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(12, 0x00a0, CLK_ENABLE_ON_INIT),
+	[DIV4_I] = DIV4(20, 0x0004, CLK_ENABLE_ON_INIT),
+};
+
+#define MSTPCR0		0xffc80030
+#define MSTPCR1		0xffc80034
+#define MSTPCR2		0xffc10028
+
+enum { MSTP004, MSTP000, MSTP127, MSTP114, MSTP113, MSTP112,
+       MSTP111, MSTP110, MSTP103, MSTP102, MSTP220,
+       MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	/* MSTPCR0 */
+	[MSTP004] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 4, 0),
+	[MSTP000] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 0, 0),
+
+	/* MSTPCR1 */
+	[MSTP127] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 27, 0),
+	[MSTP114] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 14, 0),
+	[MSTP113] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 13, 0),
+	[MSTP112] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 12, 0),
+	[MSTP111] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 11, 0),
+	[MSTP110] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 10, 0),
+	[MSTP103] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 3, 0),
+	[MSTP102] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 2, 0),
+
+	/* MSTPCR2 */
+	[MSTP220] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 20, 0),
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+
+	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP004]),
+	CLKDEV_CON_ID("riic0", &mstp_clks[MSTP000]),
+	CLKDEV_CON_ID("riic1", &mstp_clks[MSTP000]),
+	CLKDEV_CON_ID("riic2", &mstp_clks[MSTP000]),
+	CLKDEV_CON_ID("riic3", &mstp_clks[MSTP000]),
+	CLKDEV_CON_ID("riic4", &mstp_clks[MSTP000]),
+	CLKDEV_CON_ID("riic5", &mstp_clks[MSTP000]),
+	CLKDEV_CON_ID("riic6", &mstp_clks[MSTP000]),
+	CLKDEV_CON_ID("riic7", &mstp_clks[MSTP000]),
+
+	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP113]),
+	CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP114]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP112]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP111]),
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP110]),
+
+	CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP103]),
+	CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[MSTP102]),
+	CLKDEV_CON_ID("mmc0", &mstp_clks[MSTP220]),
+	CLKDEV_DEV_ID("rspi.2", &mstp_clks[MSTP127]),
+};
+
+int __init arch_clk_init(void)
+{
+	int i, ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		ret |= clk_register(clks[i]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
+					   &div4_table);
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	return ret;
+}
+
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7763.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
new file mode 100644
index 0000000..7707e35
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
@@ -0,0 +1,119 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7763.c
+ *
+ * SH7763 support for the clock framework
+ *
+ *  Copyright (C) 2005  Paul Mundt
+ *  Copyright (C) 2007  Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int bfc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 };
+static int p0fc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 };
+static int cfc_divisors[] = { 1, 1, 4, 1, 1, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= p0fc_divisors[(__raw_readl(FRQCR) >> 4) & 0x07];
+}
+
+static struct sh_clk_ops sh7763_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static unsigned long module_clk_recalc(struct clk *clk)
+{
+	int idx = ((__raw_readl(FRQCR) >> 4) & 0x07);
+	return clk->parent->rate / p0fc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7763_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static unsigned long bus_clk_recalc(struct clk *clk)
+{
+	int idx = ((__raw_readl(FRQCR) >> 16) & 0x07);
+	return clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7763_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static struct sh_clk_ops sh7763_cpu_clk_ops = {
+	.recalc		= followparent_recalc,
+};
+
+static struct sh_clk_ops *sh7763_clk_ops[] = {
+	&sh7763_master_clk_ops,
+	&sh7763_module_clk_ops,
+	&sh7763_bus_clk_ops,
+	&sh7763_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7763_clk_ops))
+		*ops = sh7763_clk_ops[idx];
+}
+
+static unsigned long shyway_clk_recalc(struct clk *clk)
+{
+	int idx = ((__raw_readl(FRQCR) >> 20) & 0x07);
+	return clk->parent->rate / cfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7763_shyway_clk_ops = {
+	.recalc		= shyway_clk_recalc,
+};
+
+static struct clk sh7763_shyway_clk = {
+	.flags		= CLK_ENABLE_ON_INIT,
+	.ops		= &sh7763_shyway_clk_ops,
+};
+
+/*
+ * Additional SH7763-specific on-chip clocks that aren't already part of the
+ * clock framework
+ */
+static struct clk *sh7763_onchip_clocks[] = {
+	&sh7763_shyway_clk,
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("shyway_clk", &sh7763_shyway_clk),
+};
+
+int __init arch_clk_init(void)
+{
+	struct clk *clk;
+	int i, ret = 0;
+
+	cpg_clk_init();
+
+	clk = clk_get(NULL, "master_clk");
+	for (i = 0; i < ARRAY_SIZE(sh7763_onchip_clocks); i++) {
+		struct clk *clkp = sh7763_onchip_clocks[i];
+
+		clkp->parent = clk;
+		ret |= clk_register(clkp);
+	}
+
+	clk_put(clk);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	return ret;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7770.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
new file mode 100644
index 0000000..5d36f33
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
@@ -0,0 +1,73 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7770.c
+ *
+ * SH7770 support for the clock framework
+ *
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 1 };
+static int bfc_divisors[] = { 1, 1, 1, 1, 1, 8,12, 1 };
+static int pfc_divisors[] = { 1, 8, 1,10,12,16, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= pfc_divisors[(__raw_readl(FRQCR) >> 28) & 0x000f];
+}
+
+static struct sh_clk_ops sh7770_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static unsigned long module_clk_recalc(struct clk *clk)
+{
+	int idx = ((__raw_readl(FRQCR) >> 28) & 0x000f);
+	return clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7770_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static unsigned long bus_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readl(FRQCR) & 0x000f);
+	return clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7770_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static unsigned long cpu_clk_recalc(struct clk *clk)
+{
+	int idx = ((__raw_readl(FRQCR) >> 24) & 0x000f);
+	return clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7770_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct sh_clk_ops *sh7770_clk_ops[] = {
+	&sh7770_master_clk_ops,
+	&sh7770_module_clk_ops,
+	&sh7770_bus_clk_ops,
+	&sh7770_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7770_clk_ops))
+		*ops = sh7770_clk_ops[idx];
+}
+
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7780.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
new file mode 100644
index 0000000..793dae4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
@@ -0,0 +1,125 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7780.c
+ *
+ * SH7780 support for the clock framework
+ *
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 2, 4 };
+static int bfc_divisors[] = { 1, 1, 1, 8, 12, 16, 24, 1 };
+static int pfc_divisors[] = { 1, 24, 24, 1 };
+static int cfc_divisors[] = { 1, 1, 4, 1, 6, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= pfc_divisors[__raw_readl(FRQCR) & 0x0003];
+}
+
+static struct sh_clk_ops sh7780_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static unsigned long module_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readl(FRQCR) & 0x0003);
+	return clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7780_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static unsigned long bus_clk_recalc(struct clk *clk)
+{
+	int idx = ((__raw_readl(FRQCR) >> 16) & 0x0007);
+	return clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7780_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static unsigned long cpu_clk_recalc(struct clk *clk)
+{
+	int idx = ((__raw_readl(FRQCR) >> 24) & 0x0001);
+	return clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7780_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct sh_clk_ops *sh7780_clk_ops[] = {
+	&sh7780_master_clk_ops,
+	&sh7780_module_clk_ops,
+	&sh7780_bus_clk_ops,
+	&sh7780_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7780_clk_ops))
+		*ops = sh7780_clk_ops[idx];
+}
+
+static unsigned long shyway_clk_recalc(struct clk *clk)
+{
+	int idx = ((__raw_readl(FRQCR) >> 20) & 0x0007);
+	return clk->parent->rate / cfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7780_shyway_clk_ops = {
+	.recalc		= shyway_clk_recalc,
+};
+
+static struct clk sh7780_shyway_clk = {
+	.flags		= CLK_ENABLE_ON_INIT,
+	.ops		= &sh7780_shyway_clk_ops,
+};
+
+/*
+ * Additional SH7780-specific on-chip clocks that aren't already part of the
+ * clock framework
+ */
+static struct clk *sh7780_onchip_clocks[] = {
+	&sh7780_shyway_clk,
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("shyway_clk", &sh7780_shyway_clk),
+};
+
+int __init arch_clk_init(void)
+{
+	struct clk *clk;
+	int i, ret = 0;
+
+	cpg_clk_init();
+
+	clk = clk_get(NULL, "master_clk");
+	for (i = 0; i < ARRAY_SIZE(sh7780_onchip_clocks); i++) {
+		struct clk *clkp = sh7780_onchip_clocks[i];
+
+		clkp->parent = clk;
+		ret |= clk_register(clkp);
+	}
+
+	clk_put(clk);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	return ret;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
new file mode 100644
index 0000000..1aafd54
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
@@ -0,0 +1,177 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+ *
+ * SH7785 support for the clock framework
+ *
+ *  Copyright (C) 2007 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cpufreq.h>
+#include <linux/clkdev.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <cpu/sh7785.h>
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 33333333,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	int multiplier;
+
+	multiplier = test_mode_pin(MODE_PIN4) ? 36 : 72;
+
+	return clk->parent->rate * multiplier;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static struct clk *clks[] = {
+	&extal_clk,
+	&pll_clk,
+};
+
+static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
+			       24, 32, 36, 48 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_GA,
+	DIV4_DU, DIV4_P, DIV4_NR };
+
+#define DIV4(_bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, FRQMR1, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_P] = DIV4(0, 0x0f80, 0),
+	[DIV4_DU] = DIV4(4, 0x0ff0, 0),
+	[DIV4_GA] = DIV4(8, 0x0030, 0),
+	[DIV4_DDR] = DIV4(12, 0x000c, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(16, 0x0fe0, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(20, 0x000c, CLK_ENABLE_ON_INIT),
+	[DIV4_U] = DIV4(24, 0x000c, CLK_ENABLE_ON_INIT),
+	[DIV4_I] = DIV4(28, 0x000e, CLK_ENABLE_ON_INIT),
+};
+
+#define MSTPCR0		0xffc80030
+#define MSTPCR1		0xffc80034
+
+enum { MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024,
+       MSTP021, MSTP020, MSTP017, MSTP016,
+       MSTP013, MSTP012, MSTP009, MSTP008, MSTP003, MSTP002,
+       MSTP119, MSTP117, MSTP105, MSTP104, MSTP100,
+       MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	/* MSTPCR0 */
+	[MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0),
+	[MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0),
+	[MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0),
+	[MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
+	[MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
+	[MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
+	[MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
+	[MSTP020] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
+	[MSTP017] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
+	[MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0),
+	[MSTP013] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 13, 0),
+	[MSTP012] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 12, 0),
+	[MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
+	[MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
+	[MSTP003] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 3, 0),
+	[MSTP002] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
+
+	/* MSTPCR1 */
+	[MSTP119] = SH_CLK_MSTP32(NULL, MSTPCR1, 19, 0),
+	[MSTP117] = SH_CLK_MSTP32(NULL, MSTPCR1, 17, 0),
+	[MSTP105] = SH_CLK_MSTP32(NULL, MSTPCR1, 5, 0),
+	[MSTP104] = SH_CLK_MSTP32(NULL, MSTPCR1, 4, 0),
+	[MSTP100] = SH_CLK_MSTP32(NULL, MSTPCR1, 0, 0),
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("du_clk", &div4_clks[DIV4_DU]),
+	CLKDEV_CON_ID("ga_clk", &div4_clks[DIV4_GA]),
+	CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_DDR]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+
+	/* MSTP32 clocks */
+	CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP029]),
+	CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP028]),
+	CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP027]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP026]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP024]),
+
+	CLKDEV_CON_ID("ssi1_fck", &mstp_clks[MSTP021]),
+	CLKDEV_CON_ID("ssi0_fck", &mstp_clks[MSTP020]),
+	CLKDEV_CON_ID("hac1_fck", &mstp_clks[MSTP017]),
+	CLKDEV_CON_ID("hac0_fck", &mstp_clks[MSTP016]),
+	CLKDEV_CON_ID("mmcif_fck", &mstp_clks[MSTP013]),
+	CLKDEV_CON_ID("flctl_fck", &mstp_clks[MSTP012]),
+
+	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP008]),
+	CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP009]),
+
+	CLKDEV_CON_ID("siof_fck", &mstp_clks[MSTP003]),
+	CLKDEV_CON_ID("hspi_fck", &mstp_clks[MSTP002]),
+	CLKDEV_CON_ID("hudi_fck", &mstp_clks[MSTP119]),
+	CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP117]),
+	CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]),
+	CLKDEV_CON_ID("dmac_5_0_fck", &mstp_clks[MSTP104]),
+	CLKDEV_CON_ID("gdta_fck", &mstp_clks[MSTP100]),
+};
+
+int __init arch_clk_init(void)
+{
+	int i, ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		ret |= clk_register(clks[i]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
+					   &div4_table);
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	return ret;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
new file mode 100644
index 0000000..ac3dcfe
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
@@ -0,0 +1,192 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7786.c
+ *
+ * SH7786 support for the clock framework
+ *
+ *  Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 33333333,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	int multiplier;
+
+	/*
+	 * Clock modes 0, 1, and 2 use an x64 multiplier against PLL1,
+	 * while modes 3, 4, and 5 use an x32.
+	 */
+	multiplier = (sh_mv.mv_mode_pins() & 0xf) < 3 ? 64 : 32;
+
+	return clk->parent->rate * multiplier;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static struct clk *clks[] = {
+	&extal_clk,
+	&pll_clk,
+};
+
+static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
+			       24, 32, 36, 48 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_DU, DIV4_P, DIV4_NR };
+
+#define DIV4(_bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, FRQMR1, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_P] = DIV4(0, 0x0b40, 0),
+	[DIV4_DU] = DIV4(4, 0x0010, 0),
+	[DIV4_DDR] = DIV4(12, 0x0002, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(16, 0x0360, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(20, 0x0002, CLK_ENABLE_ON_INIT),
+	[DIV4_I] = DIV4(28, 0x0006, CLK_ENABLE_ON_INIT),
+};
+
+#define MSTPCR0		0xffc40030
+#define MSTPCR1		0xffc40034
+
+enum { MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024,
+       MSTP023, MSTP022, MSTP021, MSTP020, MSTP017, MSTP016,
+       MSTP015, MSTP014, MSTP011, MSTP010, MSTP009, MSTP008,
+       MSTP005, MSTP004, MSTP002,
+       MSTP112, MSTP110, MSTP109, MSTP108,
+       MSTP105, MSTP104, MSTP103, MSTP102,
+       MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	/* MSTPCR0 */
+	[MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0),
+	[MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0),
+	[MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0),
+	[MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
+	[MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
+	[MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
+	[MSTP023] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
+	[MSTP022] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
+	[MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
+	[MSTP020] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
+	[MSTP017] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
+	[MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0),
+	[MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
+	[MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0),
+	[MSTP011] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
+	[MSTP010] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
+	[MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
+	[MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
+	[MSTP005] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
+	[MSTP004] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 4, 0),
+	[MSTP002] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
+
+	/* MSTPCR1 */
+	[MSTP112] = SH_CLK_MSTP32(NULL, MSTPCR1, 12, 0),
+	[MSTP110] = SH_CLK_MSTP32(NULL, MSTPCR1, 10, 0),
+	[MSTP109] = SH_CLK_MSTP32(NULL, MSTPCR1, 9, 0),
+	[MSTP108] = SH_CLK_MSTP32(NULL, MSTPCR1, 8, 0),
+	[MSTP105] = SH_CLK_MSTP32(NULL, MSTPCR1, 5, 0),
+	[MSTP104] = SH_CLK_MSTP32(NULL, MSTPCR1, 4, 0),
+	[MSTP103] = SH_CLK_MSTP32(NULL, MSTPCR1, 3, 0),
+	[MSTP102] = SH_CLK_MSTP32(NULL, MSTPCR1, 2, 0),
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("du_clk", &div4_clks[DIV4_DU]),
+	CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_DDR]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+
+	/* MSTP32 clocks */
+	CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP029]),
+	CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP028]),
+	CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP027]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP026]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP024]),
+
+	CLKDEV_CON_ID("ssi3_fck", &mstp_clks[MSTP023]),
+	CLKDEV_CON_ID("ssi2_fck", &mstp_clks[MSTP022]),
+	CLKDEV_CON_ID("ssi1_fck", &mstp_clks[MSTP021]),
+	CLKDEV_CON_ID("ssi0_fck", &mstp_clks[MSTP020]),
+	CLKDEV_CON_ID("hac1_fck", &mstp_clks[MSTP017]),
+	CLKDEV_CON_ID("hac0_fck", &mstp_clks[MSTP016]),
+	CLKDEV_CON_ID("i2c1_fck", &mstp_clks[MSTP015]),
+	CLKDEV_CON_ID("i2c0_fck", &mstp_clks[MSTP014]),
+
+	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP008]),
+	CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP009]),
+	CLKDEV_ICK_ID("fck", "sh-tmu.2", &mstp_clks[MSTP010]),
+	CLKDEV_ICK_ID("fck", "sh-tmu.3", &mstp_clks[MSTP011]),
+
+	CLKDEV_CON_ID("sdif1_fck", &mstp_clks[MSTP005]),
+	CLKDEV_CON_ID("sdif0_fck", &mstp_clks[MSTP004]),
+	CLKDEV_CON_ID("hspi_fck", &mstp_clks[MSTP002]),
+	CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP112]),
+	CLKDEV_CON_ID("pcie2_fck", &mstp_clks[MSTP110]),
+	CLKDEV_CON_ID("pcie1_fck", &mstp_clks[MSTP109]),
+	CLKDEV_CON_ID("pcie0_fck", &mstp_clks[MSTP108]),
+	CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]),
+	CLKDEV_CON_ID("dmac_5_0_fck", &mstp_clks[MSTP104]),
+	CLKDEV_CON_ID("du_fck", &mstp_clks[MSTP103]),
+	CLKDEV_CON_ID("ether_fck", &mstp_clks[MSTP102]),
+};
+
+int __init arch_clk_init(void)
+{
+	int i, ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		ret |= clk_register(clks[i]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
+					   &div4_table);
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	return ret;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-shx3.c
new file mode 100644
index 0000000..b1bdbc3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/clock-shx3.c
@@ -0,0 +1,151 @@
+/*
+ * arch/sh/kernel/cpu/sh4/clock-shx3.c
+ *
+ * SH-X3 support for the clock framework
+ *
+ *  Copyright (C) 2006-2007  Renesas Technology Corp.
+ *  Copyright (C) 2006-2007  Renesas Solutions Corp.
+ *  Copyright (C) 2006-2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 16666666,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	/* PLL1 has a fixed x72 multiplier.  */
+	return clk->parent->rate * 72;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static struct clk *clks[] = {
+	&extal_clk,
+	&pll_clk,
+};
+
+static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
+			       24, 32, 36, 48 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_SHA, DIV4_P, DIV4_NR };
+
+#define DIV4(_bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, FRQMR1, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_P] = DIV4(0, 0x0f80, 0),
+	[DIV4_SHA] = DIV4(4, 0x0ff0, 0),
+	[DIV4_DDR] = DIV4(12, 0x000c, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(16, 0x0fe0, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(20, 0x000c, CLK_ENABLE_ON_INIT),
+	[DIV4_I] = DIV4(28, 0x000e, CLK_ENABLE_ON_INIT),
+};
+
+#define MSTPCR0		0xffc00030
+#define MSTPCR1		0xffc00034
+
+enum { MSTP027, MSTP026, MSTP025, MSTP024,
+       MSTP009, MSTP008, MSTP003, MSTP002,
+       MSTP001, MSTP000, MSTP119, MSTP105,
+       MSTP104, MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	/* MSTPCR0 */
+	[MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0),
+	[MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
+	[MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
+	[MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
+	[MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
+	[MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
+	[MSTP003] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 3, 0),
+	[MSTP002] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
+	[MSTP001] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 1, 0),
+	[MSTP000] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 0, 0),
+
+	/* MSTPCR1 */
+	[MSTP119] = SH_CLK_MSTP32(NULL, MSTPCR1, 19, 0),
+	[MSTP105] = SH_CLK_MSTP32(NULL, MSTPCR1, 5, 0),
+	[MSTP104] = SH_CLK_MSTP32(NULL, MSTPCR1, 4, 0),
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("shywaya_clk", &div4_clks[DIV4_SHA]),
+	CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_DDR]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+
+	/* MSTP32 clocks */
+	CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP027]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP026]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP024]),
+
+	CLKDEV_CON_ID("h8ex_fck", &mstp_clks[MSTP003]),
+	CLKDEV_CON_ID("csm_fck", &mstp_clks[MSTP002]),
+	CLKDEV_CON_ID("fe1_fck", &mstp_clks[MSTP001]),
+	CLKDEV_CON_ID("fe0_fck", &mstp_clks[MSTP000]),
+
+	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP008]),
+	CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP009]),
+
+	CLKDEV_CON_ID("hudi_fck", &mstp_clks[MSTP119]),
+	CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]),
+	CLKDEV_CON_ID("dmac_5_0_fck", &mstp_clks[MSTP104]),
+};
+
+int __init arch_clk_init(void)
+{
+	int i, ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		ret |= clk_register(clks[i]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
+					   &div4_table);
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	return ret;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/intc-shx3.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/intc-shx3.c
new file mode 100644
index 0000000..78c9714
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/intc-shx3.c
@@ -0,0 +1,34 @@
+/*
+ * Shared support for SH-X3 interrupt controllers.
+ *
+ *  Copyright (C) 2009 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/init.h>
+
+#define INTACK		0xfe4100b8
+#define INTACKCLR	0xfe4100bc
+#define INTC_USERIMASK	0xfe411000
+
+#ifdef CONFIG_INTC_BALANCING
+unsigned int irq_lookup(unsigned int irq)
+{
+	return __raw_readl(INTACK) & 1 ? irq : NO_IRQ_IGNORE;
+}
+
+void irq_finish(unsigned int irq)
+{
+	__raw_writel(irq2evt(irq), INTACKCLR);
+}
+#endif
+
+static int __init shx3_irq_setup(void)
+{
+	return register_intc_userimask(INTC_USERIMASK);
+}
+arch_initcall(shx3_irq_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/perf_event.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/perf_event.c
new file mode 100644
index 0000000..84a2c39
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/perf_event.c
@@ -0,0 +1,302 @@
+/*
+ * Performance events support for SH-4A performance counters
+ *
+ *  Copyright (C) 2009, 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/perf_event.h>
+#include <asm/processor.h>
+
+#define PPC_CCBR(idx)	(0xff200800 + (sizeof(u32) * idx))
+#define PPC_PMCTR(idx)	(0xfc100000 + (sizeof(u32) * idx))
+
+#define CCBR_CIT_MASK	(0x7ff << 6)
+#define CCBR_DUC	(1 << 3)
+#define CCBR_CMDS	(1 << 1)
+#define CCBR_PPCE	(1 << 0)
+
+#ifdef CONFIG_CPU_SHX3
+/*
+ * The PMCAT location for SH-X3 CPUs was quietly moved, while the CCBR
+ * and PMCTR locations remains tentatively constant. This change remains
+ * wholly undocumented, and was simply found through trial and error.
+ *
+ * Early cuts of SH-X3 still appear to use the SH-X/SH-X2 locations, and
+ * it's unclear when this ceased to be the case. For now we always use
+ * the new location (if future parts keep up with this trend then
+ * scanning for them at runtime also remains a viable option.)
+ *
+ * The gap in the register space also suggests that there are other
+ * undocumented counters, so this will need to be revisited at a later
+ * point in time.
+ */
+#define PPC_PMCAT	0xfc100240
+#else
+#define PPC_PMCAT	0xfc100080
+#endif
+
+#define PMCAT_OVF3	(1 << 27)
+#define PMCAT_CNN3	(1 << 26)
+#define PMCAT_CLR3	(1 << 25)
+#define PMCAT_OVF2	(1 << 19)
+#define PMCAT_CLR2	(1 << 17)
+#define PMCAT_OVF1	(1 << 11)
+#define PMCAT_CNN1	(1 << 10)
+#define PMCAT_CLR1	(1 << 9)
+#define PMCAT_OVF0	(1 << 3)
+#define PMCAT_CLR0	(1 << 1)
+
+static struct sh_pmu sh4a_pmu;
+
+/*
+ * Supported raw event codes:
+ *
+ *	Event Code	Description
+ *	----------	-----------
+ *
+ *	0x0000		number of elapsed cycles
+ *	0x0200		number of elapsed cycles in privileged mode
+ *	0x0280		number of elapsed cycles while SR.BL is asserted
+ *	0x0202		instruction execution
+ *	0x0203		instruction execution in parallel
+ *	0x0204		number of unconditional branches
+ *	0x0208		number of exceptions
+ *	0x0209		number of interrupts
+ *	0x0220		UTLB miss caused by instruction fetch
+ *	0x0222		UTLB miss caused by operand access
+ *	0x02a0		number of ITLB misses
+ *	0x0028		number of accesses to instruction memories
+ *	0x0029		number of accesses to instruction cache
+ *	0x002a		instruction cache miss
+ *	0x022e		number of access to instruction X/Y memory
+ *	0x0030		number of reads to operand memories
+ *	0x0038		number of writes to operand memories
+ *	0x0031		number of operand cache read accesses
+ *	0x0039		number of operand cache write accesses
+ *	0x0032		operand cache read miss
+ *	0x003a		operand cache write miss
+ *	0x0236		number of reads to operand X/Y memory
+ *	0x023e		number of writes to operand X/Y memory
+ *	0x0237		number of reads to operand U memory
+ *	0x023f		number of writes to operand U memory
+ *	0x0337		number of U memory read buffer misses
+ *	0x02b4		number of wait cycles due to operand read access
+ *	0x02bc		number of wait cycles due to operand write access
+ *	0x0033		number of wait cycles due to operand cache read miss
+ *	0x003b		number of wait cycles due to operand cache write miss
+ */
+
+/*
+ * Special reserved bits used by hardware emulators, read values will
+ * vary, but writes must always be 0.
+ */
+#define PMCAT_EMU_CLR_MASK	((1 << 24) | (1 << 16) | (1 << 8) | (1 << 0))
+
+static const int sh4a_general_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES]		= 0x0000,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= 0x0202,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0029,	/* I-cache */
+	[PERF_COUNT_HW_CACHE_MISSES]		= 0x002a,	/* I-cache */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x0204,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= -1,
+	[PERF_COUNT_HW_BUS_CYCLES]		= -1,
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+static const int sh4a_cache_events
+			[PERF_COUNT_HW_CACHE_MAX]
+			[PERF_COUNT_HW_CACHE_OP_MAX]
+			[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+	[ C(L1D) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0031,
+			[ C(RESULT_MISS)   ] = 0x0032,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0039,
+			[ C(RESULT_MISS)   ] = 0x003a,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+	},
+
+	[ C(L1I) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0029,
+			[ C(RESULT_MISS)   ] = 0x002a,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+	},
+
+	[ C(LL) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0030,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0038,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+	},
+
+	[ C(DTLB) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0222,
+			[ C(RESULT_MISS)   ] = 0x0220,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+	},
+
+	[ C(ITLB) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0x02a0,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+	},
+
+	[ C(BPU) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+	},
+
+	[ C(NODE) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+	},
+};
+
+static int sh4a_event_map(int event)
+{
+	return sh4a_general_events[event];
+}
+
+static u64 sh4a_pmu_read(int idx)
+{
+	return __raw_readl(PPC_PMCTR(idx));
+}
+
+static void sh4a_pmu_disable(struct hw_perf_event *hwc, int idx)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readl(PPC_CCBR(idx));
+	tmp &= ~(CCBR_CIT_MASK | CCBR_DUC);
+	__raw_writel(tmp, PPC_CCBR(idx));
+}
+
+static void sh4a_pmu_enable(struct hw_perf_event *hwc, int idx)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readl(PPC_PMCAT);
+	tmp &= ~PMCAT_EMU_CLR_MASK;
+	tmp |= idx ? PMCAT_CLR1 : PMCAT_CLR0;
+	__raw_writel(tmp, PPC_PMCAT);
+
+	tmp = __raw_readl(PPC_CCBR(idx));
+	tmp |= (hwc->config << 6) | CCBR_CMDS | CCBR_PPCE;
+	__raw_writel(tmp, PPC_CCBR(idx));
+
+	__raw_writel(__raw_readl(PPC_CCBR(idx)) | CCBR_DUC, PPC_CCBR(idx));
+}
+
+static void sh4a_pmu_disable_all(void)
+{
+	int i;
+
+	for (i = 0; i < sh4a_pmu.num_events; i++)
+		__raw_writel(__raw_readl(PPC_CCBR(i)) & ~CCBR_DUC, PPC_CCBR(i));
+}
+
+static void sh4a_pmu_enable_all(void)
+{
+	int i;
+
+	for (i = 0; i < sh4a_pmu.num_events; i++)
+		__raw_writel(__raw_readl(PPC_CCBR(i)) | CCBR_DUC, PPC_CCBR(i));
+}
+
+static struct sh_pmu sh4a_pmu = {
+	.name		= "sh4a",
+	.num_events	= 2,
+	.event_map	= sh4a_event_map,
+	.max_events	= ARRAY_SIZE(sh4a_general_events),
+	.raw_event_mask	= 0x3ff,
+	.cache_events	= &sh4a_cache_events,
+	.read		= sh4a_pmu_read,
+	.disable	= sh4a_pmu_disable,
+	.enable		= sh4a_pmu_enable,
+	.disable_all	= sh4a_pmu_disable_all,
+	.enable_all	= sh4a_pmu_enable_all,
+};
+
+static int __init sh4a_pmu_init(void)
+{
+	/*
+	 * Make sure this CPU actually has perf counters.
+	 */
+	if (!(boot_cpu_data.flags & CPU_HAS_PERF_COUNTER)) {
+		pr_notice("HW perf events unsupported, software events only.\n");
+		return -ENODEV;
+	}
+
+	return register_sh_pmu(&sh4a_pmu);
+}
+early_initcall(sh4a_pmu_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
new file mode 100644
index 0000000..0dd5312
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <cpu/pfc.h>
+
+static struct resource sh7722_pfc_resources[] = {
+	[0] = {
+		.start	= 0xa4050100,
+		.end	= 0xa405018f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return sh_pfc_register("pfc-sh7722", sh7722_pfc_resources,
+			       ARRAY_SIZE(sh7722_pfc_resources));
+}
+arch_initcall(plat_pinmux_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c
new file mode 100644
index 0000000..99c637d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c
@@ -0,0 +1,30 @@
+/*
+ * SH7723 Pinmux
+ *
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <cpu/pfc.h>
+
+static struct resource sh7723_pfc_resources[] = {
+	[0] = {
+		.start	= 0xa4050100,
+		.end	= 0xa405016f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return sh_pfc_register("pfc-sh7723", sh7723_pfc_resources,
+			       ARRAY_SIZE(sh7723_pfc_resources));
+}
+arch_initcall(plat_pinmux_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
new file mode 100644
index 0000000..63be474
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
@@ -0,0 +1,35 @@
+/*
+ * SH7724 Pinmux
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on SH7723 Pinmux
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <cpu/pfc.h>
+
+static struct resource sh7724_pfc_resources[] = {
+	[0] = {
+		.start	= 0xa4050100,
+		.end	= 0xa405016f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return sh_pfc_register("pfc-sh7724", sh7724_pfc_resources,
+			       ARRAY_SIZE(sh7724_pfc_resources));
+}
+arch_initcall(plat_pinmux_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c
new file mode 100644
index 0000000..ea2db63
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c
@@ -0,0 +1,35 @@
+/*
+ * SH7734 processor support - PFC hardware block
+ *
+ * Copyright (C) 2012  Renesas Solutions Corp.
+ * Copyright (C) 2012  Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <cpu/pfc.h>
+
+static struct resource sh7734_pfc_resources[] = {
+	[0] = { /* PFC */
+		.start	= 0xFFFC0000,
+		.end	= 0xFFFC011C,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = { /* GPIO */
+		.start	= 0xFFC40000,
+		.end	= 0xFFC4502B,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return sh_pfc_register("pfc-sh7734", sh7734_pfc_resources,
+			       ARRAY_SIZE(sh7734_pfc_resources));
+}
+arch_initcall(plat_pinmux_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
new file mode 100644
index 0000000..567745d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
@@ -0,0 +1,35 @@
+/*
+ * SH7757 (B0 step) Pinmux
+ *
+ *  Copyright (C) 2009-2010  Renesas Solutions Corp.
+ *
+ *  Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * Based on SH7723 Pinmux
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <cpu/pfc.h>
+
+static struct resource sh7757_pfc_resources[] = {
+	[0] = {
+		.start	= 0xffec0000,
+		.end	= 0xffec008f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return sh_pfc_register("pfc-sh7757", sh7757_pfc_resources,
+			       ARRAY_SIZE(sh7757_pfc_resources));
+}
+arch_initcall(plat_pinmux_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
new file mode 100644
index 0000000..e336ab8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
@@ -0,0 +1,30 @@
+/*
+ * SH7785 Pinmux
+ *
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <cpu/pfc.h>
+
+static struct resource sh7785_pfc_resources[] = {
+	[0] = {
+		.start	= 0xffe70000,
+		.end	= 0xffe7008f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return sh_pfc_register("pfc-sh7785", sh7785_pfc_resources,
+			       ARRAY_SIZE(sh7785_pfc_resources));
+}
+arch_initcall(plat_pinmux_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c
new file mode 100644
index 0000000..9a45955
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c
@@ -0,0 +1,35 @@
+/*
+ * SH7786 Pinmux
+ *
+ * Copyright (C) 2008, 2009  Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ *  Based on SH7785 pinmux
+ *
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <cpu/pfc.h>
+
+static struct resource sh7786_pfc_resources[] = {
+	[0] = {
+		.start	= 0xffcc0000,
+		.end	= 0xffcc008f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return sh_pfc_register("pfc-sh7786", sh7786_pfc_resources,
+			       ARRAY_SIZE(sh7786_pfc_resources));
+}
+arch_initcall(plat_pinmux_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-shx3.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-shx3.c
new file mode 100644
index 0000000..444bf25
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/pinmux-shx3.c
@@ -0,0 +1,29 @@
+/*
+ * SH-X3 prototype CPU pinmux
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <cpu/pfc.h>
+
+static struct resource shx3_pfc_resources[] = {
+	[0] = {
+		.start	= 0xffc70000,
+		.end	= 0xffc7001f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return sh_pfc_register("pfc-shx3", shx3_pfc_resources,
+			       ARRAY_SIZE(shx3_pfc_resources));
+}
+arch_initcall(plat_pinmux_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/serial-sh7722.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/serial-sh7722.c
new file mode 100644
index 0000000..6ecc8b6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/serial-sh7722.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/serial_sci.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#define PSCR 0xA405011E
+
+static void sh7722_sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	unsigned short data;
+
+	if (port->mapbase == 0xffe00000) {
+		data = __raw_readw(PSCR);
+		data &= ~0x03cf;
+		if (!(cflag & CRTSCTS))
+			data |= 0x0340;
+
+		__raw_writew(data, PSCR);
+	}
+}
+
+struct plat_sci_port_ops sh7722_sci_port_ops = {
+	.init_pins	= sh7722_sci_init_pins,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
new file mode 100644
index 0000000..5788073
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -0,0 +1,446 @@
+/*
+ * SH7343 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <asm/clock.h>
+
+/* Serial */
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_CKE1,
+	.type           = PORT_SCIF,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe00000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc00)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_CKE1,
+	.type           = PORT_SCIF,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffe10000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc20)),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_CKE1,
+	.type           = PORT_SCIF,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffe20000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc40)),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.scscr		= SCSCR_CKE1,
+	.type           = PORT_SCIF,
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xffe30000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc60)),
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct resource iic0_resources[] = {
+	[0] = {
+		.name	= "IIC0",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xe00),
+		.end    = evt2irq(0xe60),
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic0_device = {
+	.name           = "i2c-sh_mobile",
+	.id             = 0, /* "i2c0" clock */
+	.num_resources  = ARRAY_SIZE(iic0_resources),
+	.resource       = iic0_resources,
+};
+
+static struct resource iic1_resources[] = {
+	[0] = {
+		.name	= "IIC1",
+		.start  = 0x04750000,
+		.end    = 0x04750017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x780),
+		.end    = evt2irq(0x7e0),
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic1_device = {
+	.name           = "i2c-sh_mobile",
+	.id             = 1, /* "i2c1" clock */
+	.num_resources  = ARRAY_SIZE(iic1_resources),
+	.resource       = iic1_resources,
+};
+
+static struct uio_info vpu_platform_data = {
+	.name = "VPU4",
+	.version = "0",
+	.irq = evt2irq(0x980),
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe9022eb,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = evt2irq(0x8c0),
+};
+
+static struct resource veu_resources[] = {
+	[0] = {
+		.name	= "VEU",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu_platform_data,
+	},
+	.resource	= veu_resources,
+	.num_resources	= ARRAY_SIZE(veu_resources),
+};
+
+static struct uio_info jpu_platform_data = {
+	.name = "JPU",
+	.version = "0",
+	.irq = evt2irq(0x560),
+};
+
+static struct resource jpu_resources[] = {
+	[0] = {
+		.name	= "JPU",
+		.start	= 0xfea00000,
+		.end	= 0xfea102d3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device jpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &jpu_platform_data,
+	},
+	.resource	= jpu_resources,
+	.num_resources	= ARRAY_SIZE(jpu_resources),
+};
+
+static struct sh_timer_config cmt_platform_data = {
+	.channels_mask = 0x20,
+};
+
+static struct resource cmt_resources[] = {
+	DEFINE_RES_MEM(0x044a0000, 0x70),
+	DEFINE_RES_IRQ(evt2irq(0xf00)),
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh-cmt-32",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80000, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0x400)),
+	DEFINE_RES_IRQ(evt2irq(0x420)),
+	DEFINE_RES_IRQ(evt2irq(0x440)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct platform_device *sh7343_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&cmt_device,
+	&tmu0_device,
+	&iic0_device,
+	&iic1_device,
+	&vpu_device,
+	&veu_device,
+	&jpu_device,
+};
+
+static int __init sh7343_devices_setup(void)
+{
+	platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
+	platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+	platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
+
+	return platform_add_devices(sh7343_devices,
+				    ARRAY_SIZE(sh7343_devices));
+}
+arch_initcall(sh7343_devices_setup);
+
+static struct platform_device *sh7343_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&cmt_device,
+	&tmu0_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7343_early_devices,
+				   ARRAY_SIZE(sh7343_early_devices));
+}
+
+enum {
+	UNUSED = 0,
+	ENABLED,
+	DISABLED,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	DMAC0, DMAC1, DMAC2, DMAC3,
+	VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
+	MFI, VPU, TPU, Z3D4, USBI0, USBI1,
+	MMC_ERR, MMC_TRAN, MMC_FSTAT, MMC_FRDY,
+	DMAC4, DMAC5, DMAC_DADERR,
+	KEYSC,
+	SCIF, SCIF1, SCIF2, SCIF3,
+	SIOF0, SIOF1, SIO,
+	FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+	I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
+	I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
+	SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI,
+	IRDA, SDHI, CMT, TSIF, SIU,
+	TMU0, TMU1, TMU2,
+	JPU, LCDC,
+
+	/* interrupt groups */
+
+	DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C0, I2C1, SIM, USB,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+	INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
+	INTC_VECT(I2C1_ALI, 0x780), INTC_VECT(I2C1_TACKI, 0x7a0),
+	INTC_VECT(I2C1_WAITI, 0x7c0), INTC_VECT(I2C1_DTEI, 0x7e0),
+	INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
+	INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
+	INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
+	INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
+	INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980),
+	INTC_VECT(TPU, 0x9a0), INTC_VECT(Z3D4, 0x9e0),
+	INTC_VECT(USBI0, 0xa20), INTC_VECT(USBI1, 0xa40),
+	INTC_VECT(MMC_ERR, 0xb00), INTC_VECT(MMC_TRAN, 0xb20),
+	INTC_VECT(MMC_FSTAT, 0xb40), INTC_VECT(MMC_FRDY, 0xb60),
+	INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
+	INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0),
+	INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIF1, 0xc20),
+	INTC_VECT(SCIF2, 0xc40), INTC_VECT(SCIF3, 0xc60),
+	INTC_VECT(SIOF0, 0xc80), INTC_VECT(SIOF1, 0xca0),
+	INTC_VECT(SIO, 0xd00),
+	INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
+	INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
+	INTC_VECT(I2C0_ALI, 0xe00), INTC_VECT(I2C0_TACKI, 0xe20),
+	INTC_VECT(I2C0_WAITI, 0xe40), INTC_VECT(I2C0_DTEI, 0xe60),
+	INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
+	INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
+	INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
+	INTC_VECT(SIU, 0xf80),
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440),
+	INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
+	INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
+	INTC_GROUP(MMC, MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR),
+	INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
+	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
+		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+	INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
+	INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
+	INTC_GROUP(SIM, SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI),
+	INTC_GROUP(USB, USBI0, USBI1),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
+	  { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
+	{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
+	  { 0, 0, 0, VPU, 0, 0, 0, MFI } },
+	{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
+	  { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } },
+	{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
+	  { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } },
+	{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
+	  { KEYSC, DMAC_DADERR, DMAC5, DMAC4, SCIF3, SCIF2, SCIF1, SCIF } },
+	{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
+	  { 0, 0, 0, SIO, Z3D4, 0, SIOF1, SIOF0 } },
+	{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
+	  { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
+	{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
+	  { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, 0, SIU } },
+	{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
+	  { 0, 0, 0, CMT, 0, USBI1, USBI0 } },
+	{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
+	  { MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR } },
+	{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
+	  { I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI, TPU, 0, 0, TSIF } },
+	{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
+	{ 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } },
+	{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
+	{ 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } },
+	{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIF1, SCIF2, SCIF3 } },
+	{ 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C0 } },
+	{ 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, I2C1 } },
+	{ 0xa4080024, 0, 16, 4, /* IPRJ */ { Z3D4, 0, SIU } },
+	{ 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
+	{ 0xa408002c, 0, 16, 4, /* IPRL */ { 0, 0, TPU } },
+	{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xa414001c, 16, 2, /* ICR1 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_desc intc_desc __initdata = {
+	.name = "sh7343",
+	.force_enable = ENABLED,
+	.force_disable = DISABLED,
+	.hw = INTC_HW_DESC(vectors, groups, mask_registers,
+			   prio_registers, sense_registers, ack_registers),
+};
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
new file mode 100644
index 0000000..6469187
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -0,0 +1,390 @@
+/*
+ * SH7366 Setup
+ *
+ *  Copyright (C) 2008 Renesas Solutions
+ *
+ * Based on linux/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <linux/usb/r8a66597.h>
+#include <asm/clock.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe00000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc00)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct resource iic_resources[] = {
+	[0] = {
+		.name	= "IIC",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xe00),
+		.end    = evt2irq(0xe60),
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+	.name           = "i2c-sh_mobile",
+	.id             = 0, /* "i2c0" clock */
+	.num_resources  = ARRAY_SIZE(iic_resources),
+	.resource       = iic_resources,
+};
+
+static struct r8a66597_platdata r8a66597_data = {
+	.on_chip = 1,
+};
+
+static struct resource usb_host_resources[] = {
+	[0] = {
+		.start  = 0xa4d80000,
+		.end    = 0xa4d800ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xa20),
+		.end    = evt2irq(0xa20),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device usb_host_device = {
+	.name	= "r8a66597_hcd",
+	.id	= -1,
+	.dev = {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb_host_resources),
+	.resource	= usb_host_resources,
+};
+
+static struct uio_info vpu_platform_data = {
+	.name = "VPU5",
+	.version = "0",
+	.irq = evt2irq(0x980),
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe902807,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu0_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = evt2irq(0x8c0),
+};
+
+static struct resource veu0_resources[] = {
+	[0] = {
+		.name	= "VEU(1)",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu0_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu0_platform_data,
+	},
+	.resource	= veu0_resources,
+	.num_resources	= ARRAY_SIZE(veu0_resources),
+};
+
+static struct uio_info veu1_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = evt2irq(0x560),
+};
+
+static struct resource veu1_resources[] = {
+	[0] = {
+		.name	= "VEU(2)",
+		.start	= 0xfe924000,
+		.end	= 0xfe9240b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu1_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &veu1_platform_data,
+	},
+	.resource	= veu1_resources,
+	.num_resources	= ARRAY_SIZE(veu1_resources),
+};
+
+static struct sh_timer_config cmt_platform_data = {
+	.channels_mask = 0x20,
+};
+
+static struct resource cmt_resources[] = {
+	DEFINE_RES_MEM(0x044a0000, 0x70),
+	DEFINE_RES_IRQ(evt2irq(0xf00)),
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh-cmt-32",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80000, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0x400)),
+	DEFINE_RES_IRQ(evt2irq(0x420)),
+	DEFINE_RES_IRQ(evt2irq(0x440)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct platform_device *sh7366_devices[] __initdata = {
+	&scif0_device,
+	&cmt_device,
+	&tmu0_device,
+	&iic_device,
+	&usb_host_device,
+	&vpu_device,
+	&veu0_device,
+	&veu1_device,
+};
+
+static int __init sh7366_devices_setup(void)
+{
+	platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+	platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+
+	return platform_add_devices(sh7366_devices,
+				    ARRAY_SIZE(sh7366_devices));
+}
+arch_initcall(sh7366_devices_setup);
+
+static struct platform_device *sh7366_early_devices[] __initdata = {
+	&scif0_device,
+	&cmt_device,
+	&tmu0_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7366_early_devices,
+				   ARRAY_SIZE(sh7366_early_devices));
+}
+
+enum {
+	UNUSED=0,
+	ENABLED,
+	DISABLED,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	ICB,
+	DMAC0, DMAC1, DMAC2, DMAC3,
+	VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
+	MFI, VPU, USB,
+	MMC_MMC1I, MMC_MMC2I, MMC_MMC3I,
+	DMAC4, DMAC5, DMAC_DADERR,
+	SCIF, SCIFA1, SCIFA2,
+	DENC, MSIOF,
+	FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+	I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI,
+	SDHI, CMT, TSIF, SIU,
+	TMU0, TMU1, TMU2,
+	VEU2, LCDC,
+
+	/* interrupt groups */
+
+	DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+	INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
+	INTC_VECT(ICB, 0x700),
+	INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
+	INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
+	INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
+	INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
+	INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980), INTC_VECT(USB, 0xa20),
+	INTC_VECT(MMC_MMC1I, 0xb00), INTC_VECT(MMC_MMC2I, 0xb20),
+	INTC_VECT(MMC_MMC3I, 0xb40),
+	INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
+	INTC_VECT(DMAC_DADERR, 0xbc0),
+	INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIFA1, 0xc20),
+	INTC_VECT(SCIFA2, 0xc40),
+	INTC_VECT(DENC, 0xc60), INTC_VECT(MSIOF, 0xc80),
+	INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
+	INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
+	INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20),
+	INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60),
+	INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
+	INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
+	INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
+	INTC_VECT(SIU, 0xf80),
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440),
+	INTC_VECT(VEU2, 0x560), INTC_VECT(LCDC, 0x580),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
+	INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
+	INTC_GROUP(MMC, MMC_MMC1I, MMC_MMC2I, MMC_MMC3I),
+	INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
+	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
+		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+	INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
+	  { } },
+	{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
+	  { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
+	{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
+	  { 0, 0, 0, VPU, 0, 0, 0, MFI } },
+	{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
+	  { 0, 0, 0, ICB } },
+	{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
+	  { 0, TMU2, TMU1, TMU0, VEU2, 0, 0, LCDC } },
+	{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
+	  { 0, DMAC_DADERR, DMAC5, DMAC4, DENC, SCIFA2, SCIFA1, SCIF } },
+	{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
+	  { 0, 0, 0, 0, 0, 0, 0, MSIOF } },
+	{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
+	  { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
+	{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
+	  { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, 0, SIU } },
+	{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
+	  { 0, 0, 0, CMT, 0, USB, } },
+	{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
+	  { 0, MMC_MMC3I, MMC_MMC2I, MMC_MMC1I } },
+	{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
+	  { 0, 0, 0, 0, 0, 0, 0, TSIF } },
+	{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
+	{ 0xa4080004, 0, 16, 4, /* IPRB */ { VEU2, LCDC, ICB } },
+	{ 0xa4080008, 0, 16, 4, /* IPRC */ { } },
+	{ 0xa408000c, 0, 16, 4, /* IPRD */ { } },
+	{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
+	{ 0xa4080014, 0, 16, 4, /* IPRF */ { 0, DMAC45, USB, CMT } },
+	{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIFA1, SCIFA2, DENC } },
+	{ 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF, 0, FLCTL, I2C } },
+	{ 0xa4080020, 0, 16, 4, /* IPRI */ { 0, 0, TSIF, } },
+	{ 0xa4080024, 0, 16, 4, /* IPRJ */ { 0, 0, SIU } },
+	{ 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
+	{ 0xa408002c, 0, 16, 4, /* IPRL */ { } },
+	{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xa414001c, 16, 2, /* ICR1 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_desc intc_desc __initdata = {
+	.name = "sh7366",
+	.force_enable = ENABLED,
+	.force_disable = DISABLED,
+	.hw = INTC_HW_DESC(vectors, groups, mask_registers,
+			   prio_registers, sense_registers, ack_registers),
+};
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
+
+void __init plat_mem_setup(void)
+{
+	/* TODO: Register Node 1 */
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
new file mode 100644
index 0000000..6b3a26e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -0,0 +1,668 @@
+/*
+ * SH7722 Setup
+ *
+ *  Copyright (C) 2006 - 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <linux/uio_driver.h>
+#include <linux/usb/m66592.h>
+
+#include <asm/clock.h>
+#include <asm/mmzone.h>
+#include <asm/siu.h>
+
+#include <cpu/dma-register.h>
+#include <cpu/sh7722.h>
+#include <cpu/serial.h>
+
+static const struct sh_dmae_slave_config sh7722_dmae_slaves[] = {
+	{
+		.slave_id	= SHDMA_SLAVE_SCIF0_TX,
+		.addr		= 0xffe0000c,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x21,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF0_RX,
+		.addr		= 0xffe00014,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x22,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF1_TX,
+		.addr		= 0xffe1000c,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x25,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF1_RX,
+		.addr		= 0xffe10014,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x26,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF2_TX,
+		.addr		= 0xffe2000c,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x29,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF2_RX,
+		.addr		= 0xffe20014,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2a,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SIUA_TX,
+		.addr		= 0xa454c098,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xb1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SIUA_RX,
+		.addr		= 0xa454c090,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xb2,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SIUB_TX,
+		.addr		= 0xa454c09c,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xb5,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SIUB_RX,
+		.addr		= 0xa454c094,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xb6,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
+		.addr		= 0x04ce0030,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI0_RX,
+		.addr		= 0x04ce0030,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc2,
+	},
+};
+
+static const struct sh_dmae_channel sh7722_dmae_channels[] = {
+	{
+		.offset = 0,
+		.dmars = 0,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x10,
+		.dmars = 0,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x20,
+		.dmars = 4,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x30,
+		.dmars = 4,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x50,
+		.dmars = 8,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x60,
+		.dmars = 8,
+		.dmars_bit = 8,
+	}
+};
+
+static const unsigned int ts_shift[] = TS_SHIFT;
+
+static struct sh_dmae_pdata dma_platform_data = {
+	.slave		= sh7722_dmae_slaves,
+	.slave_num	= ARRAY_SIZE(sh7722_dmae_slaves),
+	.channel	= sh7722_dmae_channels,
+	.channel_num	= ARRAY_SIZE(sh7722_dmae_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+static struct resource sh7722_dmae_resources[] = {
+	[0] = {
+		/* Channel registers and DMAOR */
+		.start	= 0xfe008020,
+		.end	= 0xfe00808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* DMARSx */
+		.start	= 0xfe009000,
+		.end	= 0xfe00900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "error_irq",
+		.start	= evt2irq(0xbc0),
+		.end	= evt2irq(0xbc0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 0-3 */
+		.start	= evt2irq(0x800),
+		.end	= evt2irq(0x860),
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 4-5 */
+		.start	= evt2irq(0xb80),
+		.end	= evt2irq(0xba0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device dma_device = {
+	.name		= "sh-dma-engine",
+	.id		= -1,
+	.resource	= sh7722_dmae_resources,
+	.num_resources	= ARRAY_SIZE(sh7722_dmae_resources),
+	.dev		= {
+		.platform_data	= &dma_platform_data,
+	},
+};
+
+/* Serial */
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type           = PORT_SCIF,
+	.ops		= &sh7722_sci_port_ops,
+	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe00000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc00)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type           = PORT_SCIF,
+	.ops		= &sh7722_sci_port_ops,
+	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffe10000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc20)),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type           = PORT_SCIF,
+	.ops		= &sh7722_sci_port_ops,
+	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffe20000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc40)),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xa465fec0,
+		.end	= 0xa465fec0 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Period IRQ */
+		.start	= evt2irq(0x7a0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* Carry IRQ */
+		.start	= evt2irq(0x7c0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		/* Alarm IRQ */
+		.start	= evt2irq(0x780),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+static struct m66592_platdata usbf_platdata = {
+	.on_chip = 1,
+};
+
+static struct resource usbf_resources[] = {
+	[0] = {
+		.name	= "USBF",
+		.start	= 0x04480000,
+		.end	= 0x044800FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa20),
+		.end	= evt2irq(0xa20),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usbf_device = {
+	.name		= "m66592_udc",
+	.id             = 0, /* "usbf0" clock */
+	.dev = {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbf_platdata,
+	},
+	.num_resources	= ARRAY_SIZE(usbf_resources),
+	.resource	= usbf_resources,
+};
+
+static struct resource iic_resources[] = {
+	[0] = {
+		.name	= "IIC",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xe00),
+		.end    = evt2irq(0xe60),
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+	.name           = "i2c-sh_mobile",
+	.id             = 0, /* "i2c0" clock */
+	.num_resources  = ARRAY_SIZE(iic_resources),
+	.resource       = iic_resources,
+};
+
+static struct uio_info vpu_platform_data = {
+	.name = "VPU4",
+	.version = "0",
+	.irq = evt2irq(0x980),
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe9022eb,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = evt2irq(0x8c0),
+};
+
+static struct resource veu_resources[] = {
+	[0] = {
+		.name	= "VEU",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu_platform_data,
+	},
+	.resource	= veu_resources,
+	.num_resources	= ARRAY_SIZE(veu_resources),
+};
+
+static struct uio_info jpu_platform_data = {
+	.name = "JPU",
+	.version = "0",
+	.irq = evt2irq(0x560),
+};
+
+static struct resource jpu_resources[] = {
+	[0] = {
+		.name	= "JPU",
+		.start	= 0xfea00000,
+		.end	= 0xfea102d3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device jpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &jpu_platform_data,
+	},
+	.resource	= jpu_resources,
+	.num_resources	= ARRAY_SIZE(jpu_resources),
+};
+
+static struct sh_timer_config cmt_platform_data = {
+	.channels_mask = 0x20,
+};
+
+static struct resource cmt_resources[] = {
+	DEFINE_RES_MEM(0x044a0000, 0x70),
+	DEFINE_RES_IRQ(evt2irq(0xf00)),
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh-cmt-32",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80000, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0x400)),
+	DEFINE_RES_IRQ(evt2irq(0x420)),
+	DEFINE_RES_IRQ(evt2irq(0x440)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct siu_platform siu_platform_data = {
+	.dma_slave_tx_a	= SHDMA_SLAVE_SIUA_TX,
+	.dma_slave_rx_a	= SHDMA_SLAVE_SIUA_RX,
+	.dma_slave_tx_b	= SHDMA_SLAVE_SIUB_TX,
+	.dma_slave_rx_b	= SHDMA_SLAVE_SIUB_RX,
+};
+
+static struct resource siu_resources[] = {
+	[0] = {
+		.start	= 0xa4540000,
+		.end	= 0xa454c10f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xf80),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device siu_device = {
+	.name		= "siu-pcm-audio",
+	.id		= -1,
+	.dev = {
+		.platform_data	= &siu_platform_data,
+	},
+	.resource	= siu_resources,
+	.num_resources	= ARRAY_SIZE(siu_resources),
+};
+
+static struct platform_device *sh7722_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&cmt_device,
+	&tmu0_device,
+	&rtc_device,
+	&usbf_device,
+	&iic_device,
+	&vpu_device,
+	&veu_device,
+	&jpu_device,
+	&siu_device,
+	&dma_device,
+};
+
+static int __init sh7722_devices_setup(void)
+{
+	platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
+	platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+	platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
+
+	return platform_add_devices(sh7722_devices,
+				    ARRAY_SIZE(sh7722_devices));
+}
+arch_initcall(sh7722_devices_setup);
+
+static struct platform_device *sh7722_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&cmt_device,
+	&tmu0_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7722_early_devices,
+				   ARRAY_SIZE(sh7722_early_devices));
+}
+
+enum {
+	UNUSED=0,
+	ENABLED,
+	DISABLED,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	HUDI,
+	SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
+	RTC_ATI, RTC_PRI, RTC_CUI,
+	DMAC0, DMAC1, DMAC2, DMAC3,
+	VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
+	VPU, TPU,
+	USB_USBI0, USB_USBI1,
+	DMAC4, DMAC5, DMAC_DADERR,
+	KEYSC,
+	SCIF0, SCIF1, SCIF2, SIOF0, SIOF1, SIO,
+	FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+	I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI,
+	CMT, TSIF, SIU, TWODG,
+	TMU0, TMU1, TMU2,
+	IRDA, JPU, LCDC,
+
+	/* interrupt groups */
+	SIM, RTC, DMAC0123, VIOVOU, USB, DMAC45, FLCTL, I2C, SDHI,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+	INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
+	INTC_VECT(SIM_ERI, 0x700), INTC_VECT(SIM_RXI, 0x720),
+	INTC_VECT(SIM_TXI, 0x740), INTC_VECT(SIM_TEI, 0x760),
+	INTC_VECT(RTC_ATI, 0x780), INTC_VECT(RTC_PRI, 0x7a0),
+	INTC_VECT(RTC_CUI, 0x7c0),
+	INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
+	INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
+	INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
+	INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
+	INTC_VECT(VPU, 0x980), INTC_VECT(TPU, 0x9a0),
+	INTC_VECT(USB_USBI0, 0xa20), INTC_VECT(USB_USBI1, 0xa40),
+	INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
+	INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0),
+	INTC_VECT(SCIF0, 0xc00), INTC_VECT(SCIF1, 0xc20),
+	INTC_VECT(SCIF2, 0xc40), INTC_VECT(SIOF0, 0xc80),
+	INTC_VECT(SIOF1, 0xca0), INTC_VECT(SIO, 0xd00),
+	INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
+	INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
+	INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20),
+	INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60),
+	INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
+	INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
+	INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
+	INTC_VECT(SIU, 0xf80), INTC_VECT(TWODG, 0xfa0),
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440), INTC_VECT(IRDA, 0x480),
+	INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI),
+	INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
+	INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
+	INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
+	INTC_GROUP(USB, USB_USBI0, USB_USBI1),
+	INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
+	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
+		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+	INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
+	  { } },
+	{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
+	  { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
+	{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
+	  { 0, 0, 0, VPU, } },
+	{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
+	  { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } },
+	{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
+	  { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } },
+	{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
+	  { KEYSC, DMAC_DADERR, DMAC5, DMAC4, 0, SCIF2, SCIF1, SCIF0 } },
+	{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
+	  { 0, 0, 0, SIO, 0, 0, SIOF1, SIOF0 } },
+	{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
+	  { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
+	{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
+	  { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, TWODG, SIU } },
+	{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
+	  { 0, 0, 0, CMT, 0, USB_USBI1, USB_USBI0, } },
+	{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
+	  { } },
+	{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
+	  { 0, RTC_CUI, RTC_PRI, RTC_ATI, 0, TPU, 0, TSIF } },
+	{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, IRDA } },
+	{ 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } },
+	{ 0xa4080008, 0, 16, 4, /* IPRC */ { } },
+	{ 0xa408000c, 0, 16, 4, /* IPRD */ { } },
+	{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, 0, VPU } },
+	{ 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } },
+	{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, SCIF2 } },
+	{ 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C } },
+	{ 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, RTC } },
+	{ 0xa4080024, 0, 16, 4, /* IPRJ */ { 0, 0, SIU } },
+	{ 0xa4080028, 0, 16, 4, /* IPRK */ { 0, 0, 0, SDHI } },
+	{ 0xa408002c, 0, 16, 4, /* IPRL */ { TWODG, 0, TPU } },
+	{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xa414001c, 16, 2, /* ICR1 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_desc intc_desc __initdata = {
+	.name = "sh7722",
+	.force_enable = ENABLED,
+	.force_disable = DISABLED,
+	.hw = INTC_HW_DESC(vectors, groups, mask_registers,
+			   prio_registers, sense_registers, ack_registers),
+};
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
+
+void __init plat_mem_setup(void)
+{
+	/* Register the URAM space as Node 1 */
+	setup_bootmem_node(1, 0x055f0000, 0x05610000);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
new file mode 100644
index 0000000..1c1b3c4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -0,0 +1,646 @@
+/*
+ * SH7723 Setup
+ *
+ *  Copyright (C) 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/mm.h>
+#include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+#include <asm/mmzone.h>
+#include <cpu/sh7723.h>
+
+/* Serial */
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type           = PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe00000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc00)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type           = PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffe10000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc20)),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type           = PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffe20000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc40)),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.sampling_rate	= 8,
+	.type           = PORT_SCIFA,
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xa4e30000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x900)),
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.sampling_rate	= 8,
+	.type           = PORT_SCIFA,
+};
+
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xa4e40000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xd00)),
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.sampling_rate	= 8,
+	.type           = PORT_SCIFA,
+};
+
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xa4e50000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xfa0)),
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct uio_info vpu_platform_data = {
+	.name = "VPU5",
+	.version = "0",
+	.irq = evt2irq(0x980),
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe902807,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu0_platform_data = {
+	.name = "VEU2H",
+	.version = "0",
+	.irq = evt2irq(0x8c0),
+};
+
+static struct resource veu0_resources[] = {
+	[0] = {
+		.name	= "VEU2H0",
+		.start	= 0xfe920000,
+		.end	= 0xfe92027b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu0_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu0_platform_data,
+	},
+	.resource	= veu0_resources,
+	.num_resources	= ARRAY_SIZE(veu0_resources),
+};
+
+static struct uio_info veu1_platform_data = {
+	.name = "VEU2H",
+	.version = "0",
+	.irq = evt2irq(0x560),
+};
+
+static struct resource veu1_resources[] = {
+	[0] = {
+		.name	= "VEU2H1",
+		.start	= 0xfe924000,
+		.end	= 0xfe92427b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu1_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &veu1_platform_data,
+	},
+	.resource	= veu1_resources,
+	.num_resources	= ARRAY_SIZE(veu1_resources),
+};
+
+static struct sh_timer_config cmt_platform_data = {
+	.channels_mask = 0x20,
+};
+
+static struct resource cmt_resources[] = {
+	DEFINE_RES_MEM(0x044a0000, 0x70),
+	DEFINE_RES_IRQ(evt2irq(0xf00)),
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh-cmt-32",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80000, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0x400)),
+	DEFINE_RES_IRQ(evt2irq(0x420)),
+	DEFINE_RES_IRQ(evt2irq(0x440)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu1_resources[] = {
+	DEFINE_RES_MEM(0xffd90000, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0x920)),
+	DEFINE_RES_IRQ(evt2irq(0x940)),
+	DEFINE_RES_IRQ(evt2irq(0x960)),
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh-tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xa465fec0,
+		.end	= 0xa465fec0 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Period IRQ */
+		.start	= evt2irq(0xaa0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* Carry IRQ */
+		.start	= evt2irq(0xac0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		/* Alarm IRQ */
+		.start	= evt2irq(0xa80),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+static struct r8a66597_platdata r8a66597_data = {
+	.on_chip = 1,
+};
+
+static struct resource sh7723_usb_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d80000,
+		.end	= 0xa4d800ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa20),
+		.end	= evt2irq(0xa20),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device sh7723_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
+	},
+	.num_resources	= ARRAY_SIZE(sh7723_usb_host_resources),
+	.resource	= sh7723_usb_host_resources,
+};
+
+static struct resource iic_resources[] = {
+	[0] = {
+		.name	= "IIC",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xe00),
+		.end    = evt2irq(0xe60),
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+	.name           = "i2c-sh_mobile",
+	.id             = 0, /* "i2c0" clock */
+	.num_resources  = ARRAY_SIZE(iic_resources),
+	.resource       = iic_resources,
+};
+
+static struct platform_device *sh7723_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&cmt_device,
+	&tmu0_device,
+	&tmu1_device,
+	&rtc_device,
+	&iic_device,
+	&sh7723_usb_host_device,
+	&vpu_device,
+	&veu0_device,
+	&veu1_device,
+};
+
+static int __init sh7723_devices_setup(void)
+{
+	platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+	platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+
+	return platform_add_devices(sh7723_devices,
+				    ARRAY_SIZE(sh7723_devices));
+}
+arch_initcall(sh7723_devices_setup);
+
+static struct platform_device *sh7723_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&cmt_device,
+	&tmu0_device,
+	&tmu1_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7723_early_devices,
+				   ARRAY_SIZE(sh7723_early_devices));
+}
+
+#define RAMCR_CACHE_L2FC	0x0002
+#define RAMCR_CACHE_L2E		0x0001
+#define L2_CACHE_ENABLE		(RAMCR_CACHE_L2E|RAMCR_CACHE_L2FC)
+
+void l2_cache_init(void)
+{
+	/* Enable L2 cache */
+	__raw_writel(L2_CACHE_ENABLE, RAMCR);
+}
+
+enum {
+	UNUSED=0,
+	ENABLED,
+	DISABLED,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	HUDI,
+	DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3,
+	_2DG_TRI,_2DG_INI,_2DG_CEI,
+	DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3,
+	VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI,
+	SCIFA_SCIFA0,
+	VPU_VPUI,
+	TPU_TPUI,
+	ADC_ADI,
+	USB_USI0,
+	RTC_ATI,RTC_PRI,RTC_CUI,
+	DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR,
+	DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR,
+	KEYSC_KEYI,
+	SCIF_SCIF0,SCIF_SCIF1,SCIF_SCIF2,
+	MSIOF_MSIOFI0,MSIOF_MSIOFI1,
+	SCIFA_SCIFA1,
+	FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I,
+	I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI,
+	CMT_CMTI,
+	TSIF_TSIFI,
+	SIU_SIUI,
+	SCIFA_SCIFA2,
+	TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
+	IRDA_IRDAI,
+	ATAPI_ATAPII,
+	VEU2H1_VEU2HI,
+	LCDC_LCDCI,
+	TMU1_TUNI0,TMU1_TUNI1,TMU1_TUNI2,
+
+	/* interrupt groups */
+	DMAC1A, DMAC0A, VIO, DMAC0B, FLCTL, I2C, _2DG,
+	SDHI1, RTC, DMAC1B, SDHI0,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+	INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
+
+	INTC_VECT(DMAC1A_DEI0,0x700),
+	INTC_VECT(DMAC1A_DEI1,0x720),
+	INTC_VECT(DMAC1A_DEI2,0x740),
+	INTC_VECT(DMAC1A_DEI3,0x760),
+
+	INTC_VECT(_2DG_TRI, 0x780),
+	INTC_VECT(_2DG_INI, 0x7A0),
+	INTC_VECT(_2DG_CEI, 0x7C0),
+
+	INTC_VECT(DMAC0A_DEI0,0x800),
+	INTC_VECT(DMAC0A_DEI1,0x820),
+	INTC_VECT(DMAC0A_DEI2,0x840),
+	INTC_VECT(DMAC0A_DEI3,0x860),
+
+	INTC_VECT(VIO_CEUI,0x880),
+	INTC_VECT(VIO_BEUI,0x8A0),
+	INTC_VECT(VIO_VEU2HI,0x8C0),
+	INTC_VECT(VIO_VOUI,0x8E0),
+
+	INTC_VECT(SCIFA_SCIFA0,0x900),
+	INTC_VECT(VPU_VPUI,0x980),
+	INTC_VECT(TPU_TPUI,0x9A0),
+	INTC_VECT(ADC_ADI,0x9E0),
+	INTC_VECT(USB_USI0,0xA20),
+
+	INTC_VECT(RTC_ATI,0xA80),
+	INTC_VECT(RTC_PRI,0xAA0),
+	INTC_VECT(RTC_CUI,0xAC0),
+
+	INTC_VECT(DMAC1B_DEI4,0xB00),
+	INTC_VECT(DMAC1B_DEI5,0xB20),
+	INTC_VECT(DMAC1B_DADERR,0xB40),
+
+	INTC_VECT(DMAC0B_DEI4,0xB80),
+	INTC_VECT(DMAC0B_DEI5,0xBA0),
+	INTC_VECT(DMAC0B_DADERR,0xBC0),
+
+	INTC_VECT(KEYSC_KEYI,0xBE0),
+	INTC_VECT(SCIF_SCIF0,0xC00),
+	INTC_VECT(SCIF_SCIF1,0xC20),
+	INTC_VECT(SCIF_SCIF2,0xC40),
+	INTC_VECT(MSIOF_MSIOFI0,0xC80),
+	INTC_VECT(MSIOF_MSIOFI1,0xCA0),
+	INTC_VECT(SCIFA_SCIFA1,0xD00),
+
+	INTC_VECT(FLCTL_FLSTEI,0xD80),
+	INTC_VECT(FLCTL_FLTENDI,0xDA0),
+	INTC_VECT(FLCTL_FLTREQ0I,0xDC0),
+	INTC_VECT(FLCTL_FLTREQ1I,0xDE0),
+
+	INTC_VECT(I2C_ALI,0xE00),
+	INTC_VECT(I2C_TACKI,0xE20),
+	INTC_VECT(I2C_WAITI,0xE40),
+	INTC_VECT(I2C_DTEI,0xE60),
+
+	INTC_VECT(SDHI0, 0xE80),
+	INTC_VECT(SDHI0, 0xEA0),
+	INTC_VECT(SDHI0, 0xEC0),
+
+	INTC_VECT(CMT_CMTI,0xF00),
+	INTC_VECT(TSIF_TSIFI,0xF20),
+	INTC_VECT(SIU_SIUI,0xF80),
+	INTC_VECT(SCIFA_SCIFA2,0xFA0),
+
+	INTC_VECT(TMU0_TUNI0,0x400),
+	INTC_VECT(TMU0_TUNI1,0x420),
+	INTC_VECT(TMU0_TUNI2,0x440),
+
+	INTC_VECT(IRDA_IRDAI,0x480),
+	INTC_VECT(ATAPI_ATAPII,0x4A0),
+
+	INTC_VECT(SDHI1, 0x4E0),
+	INTC_VECT(SDHI1, 0x500),
+	INTC_VECT(SDHI1, 0x520),
+
+	INTC_VECT(VEU2H1_VEU2HI,0x560),
+	INTC_VECT(LCDC_LCDCI,0x580),
+
+	INTC_VECT(TMU1_TUNI0,0x920),
+	INTC_VECT(TMU1_TUNI1,0x940),
+	INTC_VECT(TMU1_TUNI2,0x960),
+
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(DMAC1A,DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3),
+	INTC_GROUP(DMAC0A,DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3),
+	INTC_GROUP(VIO, VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI),
+	INTC_GROUP(DMAC0B, DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR),
+	INTC_GROUP(FLCTL,FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I),
+	INTC_GROUP(I2C,I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI),
+	INTC_GROUP(_2DG, _2DG_TRI,_2DG_INI,_2DG_CEI),
+	INTC_GROUP(RTC, RTC_ATI,RTC_PRI,RTC_CUI),
+	INTC_GROUP(DMAC1B, DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
+	  { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
+	    0, ENABLED, ENABLED, ENABLED } },
+	{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
+	  { VIO_VOUI, VIO_VEU2HI,VIO_BEUI,VIO_CEUI,DMAC0A_DEI3,DMAC0A_DEI2,DMAC0A_DEI1,DMAC0A_DEI0 } },
+	{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
+	  { 0, 0, 0, VPU_VPUI,0,0,0,SCIFA_SCIFA0 } },
+	{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
+	  { DMAC1A_DEI3,DMAC1A_DEI2,DMAC1A_DEI1,DMAC1A_DEI0,0,0,0,IRDA_IRDAI } },
+	{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
+	  { 0,TMU0_TUNI2,TMU0_TUNI1,TMU0_TUNI0,VEU2H1_VEU2HI,0,0,LCDC_LCDCI } },
+	{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
+	  { KEYSC_KEYI,DMAC0B_DADERR,DMAC0B_DEI5,DMAC0B_DEI4,0,SCIF_SCIF2,SCIF_SCIF1,SCIF_SCIF0 } },
+	{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
+	  { 0,0,0,SCIFA_SCIFA1,ADC_ADI,0,MSIOF_MSIOFI1,MSIOF_MSIOFI0 } },
+	{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
+	  { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+	{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
+	  { 0, ENABLED, ENABLED, ENABLED,
+	    0, 0, SCIFA_SCIFA2, SIU_SIUI } },
+	{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
+	  { 0, 0, 0, CMT_CMTI, 0, 0, USB_USI0,0 } },
+	{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
+	  { 0, DMAC1B_DADERR,DMAC1B_DEI5,DMAC1B_DEI4,0,RTC_ATI,RTC_PRI,RTC_CUI } },
+	{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
+	  { 0,_2DG_CEI,_2DG_INI,_2DG_TRI,0,TPU_TPUI,0,TSIF_TSIFI } },
+	{ 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */
+	  { 0,0,0,0,0,0,0,ATAPI_ATAPII } },
+	{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2, IRDA_IRDAI } },
+	{ 0xa4080004, 0, 16, 4, /* IPRB */ { VEU2H1_VEU2HI, LCDC_LCDCI, DMAC1A, 0} },
+	{ 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2, 0} },
+	{ 0xa408000c, 0, 16, 4, /* IPRD */ { } },
+	{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0A, VIO, SCIFA_SCIFA0, VPU_VPUI } },
+	{ 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC_KEYI, DMAC0B, USB_USI0, CMT_CMTI } },
+	{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2,0 } },
+	{ 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0,MSIOF_MSIOFI1, FLCTL, I2C } },
+	{ 0xa4080020, 0, 16, 4, /* IPRI */ { SCIFA_SCIFA1,0,TSIF_TSIFI,_2DG } },
+	{ 0xa4080024, 0, 16, 4, /* IPRJ */ { ADC_ADI,0,SIU_SIUI,SDHI1 } },
+	{ 0xa4080028, 0, 16, 4, /* IPRK */ { RTC,DMAC1B,0,SDHI0 } },
+	{ 0xa408002c, 0, 16, 4, /* IPRL */ { SCIFA_SCIFA2,0,TPU_TPUI,ATAPI_ATAPII } },
+	{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xa414001c, 16, 2, /* ICR1 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_desc intc_desc __initdata = {
+	.name = "sh7723",
+	.force_enable = ENABLED,
+	.force_disable = DISABLED,
+	.hw = INTC_HW_DESC(vectors, groups, mask_registers,
+			   prio_registers, sense_registers, ack_registers),
+};
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
new file mode 100644
index 0000000..c20258b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -0,0 +1,1290 @@
+/*
+ * SH7724 Setup
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on SH7723 Setup
+ * Copyright (C) 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/mm.h>
+#include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <linux/sh_dma.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <linux/io.h>
+#include <linux/notifier.h>
+
+#include <asm/suspend.h>
+#include <asm/clock.h>
+#include <asm/mmzone.h>
+
+#include <cpu/dma-register.h>
+#include <cpu/sh7724.h>
+
+/* DMA */
+static const struct sh_dmae_slave_config sh7724_dmae_slaves[] = {
+	{
+		.slave_id	= SHDMA_SLAVE_SCIF0_TX,
+		.addr		= 0xffe0000c,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x21,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF0_RX,
+		.addr		= 0xffe00014,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x22,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF1_TX,
+		.addr		= 0xffe1000c,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x25,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF1_RX,
+		.addr		= 0xffe10014,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x26,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF2_TX,
+		.addr		= 0xffe2000c,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x29,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF2_RX,
+		.addr		= 0xffe20014,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2a,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF3_TX,
+		.addr		= 0xa4e30020,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2d,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF3_RX,
+		.addr		= 0xa4e30024,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2e,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF4_TX,
+		.addr		= 0xa4e40020,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x31,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF4_RX,
+		.addr		= 0xa4e40024,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x32,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF5_TX,
+		.addr		= 0xa4e50020,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x35,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF5_RX,
+		.addr		= 0xa4e50024,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x36,
+	}, {
+		.slave_id	= SHDMA_SLAVE_USB0D0_TX,
+		.addr		= 0xA4D80100,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0x73,
+	}, {
+		.slave_id	= SHDMA_SLAVE_USB0D0_RX,
+		.addr		= 0xA4D80100,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0x73,
+	}, {
+		.slave_id	= SHDMA_SLAVE_USB0D1_TX,
+		.addr		= 0xA4D80120,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0x77,
+	}, {
+		.slave_id	= SHDMA_SLAVE_USB0D1_RX,
+		.addr		= 0xA4D80120,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0x77,
+	}, {
+		.slave_id	= SHDMA_SLAVE_USB1D0_TX,
+		.addr		= 0xA4D90100,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xab,
+	}, {
+		.slave_id	= SHDMA_SLAVE_USB1D0_RX,
+		.addr		= 0xA4D90100,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xab,
+	}, {
+		.slave_id	= SHDMA_SLAVE_USB1D1_TX,
+		.addr		= 0xA4D90120,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xaf,
+	}, {
+		.slave_id	= SHDMA_SLAVE_USB1D1_RX,
+		.addr		= 0xA4D90120,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xaf,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
+		.addr		= 0x04ce0030,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI0_RX,
+		.addr		= 0x04ce0030,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc2,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI1_TX,
+		.addr		= 0x04cf0030,
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc9,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI1_RX,
+		.addr		= 0x04cf0030,
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xca,
+	},
+};
+
+static const struct sh_dmae_channel sh7724_dmae_channels[] = {
+	{
+		.offset = 0,
+		.dmars = 0,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x10,
+		.dmars = 0,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x20,
+		.dmars = 4,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x30,
+		.dmars = 4,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x50,
+		.dmars = 8,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x60,
+		.dmars = 8,
+		.dmars_bit = 8,
+	}
+};
+
+static const unsigned int ts_shift[] = TS_SHIFT;
+
+static struct sh_dmae_pdata dma_platform_data = {
+	.slave		= sh7724_dmae_slaves,
+	.slave_num	= ARRAY_SIZE(sh7724_dmae_slaves),
+	.channel	= sh7724_dmae_channels,
+	.channel_num	= ARRAY_SIZE(sh7724_dmae_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+/* Resource order important! */
+static struct resource sh7724_dmae0_resources[] = {
+	{
+		/* Channel registers and DMAOR */
+		.start	= 0xfe008020,
+		.end	= 0xfe00808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMARSx */
+		.start	= 0xfe009000,
+		.end	= 0xfe00900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "error_irq",
+		.start	= evt2irq(0xbc0),
+		.end	= evt2irq(0xbc0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 0-3 */
+		.start	= evt2irq(0x800),
+		.end	= evt2irq(0x860),
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 4-5 */
+		.start	= evt2irq(0xb80),
+		.end	= evt2irq(0xba0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+/* Resource order important! */
+static struct resource sh7724_dmae1_resources[] = {
+	{
+		/* Channel registers and DMAOR */
+		.start	= 0xfdc08020,
+		.end	= 0xfdc0808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMARSx */
+		.start	= 0xfdc09000,
+		.end	= 0xfdc0900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "error_irq",
+		.start	= evt2irq(0xb40),
+		.end	= evt2irq(0xb40),
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 0-3 */
+		.start	= evt2irq(0x700),
+		.end	= evt2irq(0x760),
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 4-5 */
+		.start	= evt2irq(0xb00),
+		.end	= evt2irq(0xb20),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dma0_device = {
+	.name		= "sh-dma-engine",
+	.id		= 0,
+	.resource	= sh7724_dmae0_resources,
+	.num_resources	= ARRAY_SIZE(sh7724_dmae0_resources),
+	.dev		= {
+		.platform_data	= &dma_platform_data,
+	},
+};
+
+static struct platform_device dma1_device = {
+	.name		= "sh-dma-engine",
+	.id		= 1,
+	.resource	= sh7724_dmae1_resources,
+	.num_resources	= ARRAY_SIZE(sh7724_dmae1_resources),
+	.dev		= {
+		.platform_data	= &dma_platform_data,
+	},
+};
+
+/* Serial */
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type           = PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe00000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc00)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type           = PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffe10000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc20)),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type           = PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffe20000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc40)),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.sampling_rate	= 8,
+	.type           = PORT_SCIFA,
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xa4e30000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x900)),
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.sampling_rate	= 8,
+	.type           = PORT_SCIFA,
+};
+
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xa4e40000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xd00)),
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.sampling_rate	= 8,
+	.type           = PORT_SCIFA,
+};
+
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xa4e50000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xfa0)),
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+/* RTC */
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xa465fec0,
+		.end	= 0xa465fec0 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Period IRQ */
+		.start	= evt2irq(0xaa0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* Carry IRQ */
+		.start	= evt2irq(0xac0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		/* Alarm IRQ */
+		.start	= evt2irq(0xa80),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+/* I2C0 */
+static struct resource iic0_resources[] = {
+	[0] = {
+		.name	= "IIC0",
+		.start  = 0x04470000,
+		.end    = 0x04470018 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xe00),
+		.end    = evt2irq(0xe60),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device iic0_device = {
+	.name           = "i2c-sh_mobile",
+	.id             = 0, /* "i2c0" clock */
+	.num_resources  = ARRAY_SIZE(iic0_resources),
+	.resource       = iic0_resources,
+};
+
+/* I2C1 */
+static struct resource iic1_resources[] = {
+	[0] = {
+		.name	= "IIC1",
+		.start  = 0x04750000,
+		.end    = 0x04750018 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xd80),
+		.end    = evt2irq(0xde0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device iic1_device = {
+	.name           = "i2c-sh_mobile",
+	.id             = 1, /* "i2c1" clock */
+	.num_resources  = ARRAY_SIZE(iic1_resources),
+	.resource       = iic1_resources,
+};
+
+/* VPU */
+static struct uio_info vpu_platform_data = {
+	.name = "VPU5F",
+	.version = "0",
+	.irq = evt2irq(0x980),
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe902807,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+/* VEU0 */
+static struct uio_info veu0_platform_data = {
+	.name = "VEU3F0",
+	.version = "0",
+	.irq = evt2irq(0xc60),
+};
+
+static struct resource veu0_resources[] = {
+	[0] = {
+		.name	= "VEU3F0",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200cb,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu0_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu0_platform_data,
+	},
+	.resource	= veu0_resources,
+	.num_resources	= ARRAY_SIZE(veu0_resources),
+};
+
+/* VEU1 */
+static struct uio_info veu1_platform_data = {
+	.name = "VEU3F1",
+	.version = "0",
+	.irq = evt2irq(0x8c0),
+};
+
+static struct resource veu1_resources[] = {
+	[0] = {
+		.name	= "VEU3F1",
+		.start	= 0xfe924000,
+		.end	= 0xfe9240cb,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu1_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &veu1_platform_data,
+	},
+	.resource	= veu1_resources,
+	.num_resources	= ARRAY_SIZE(veu1_resources),
+};
+
+/* BEU0 */
+static struct uio_info beu0_platform_data = {
+	.name = "BEU0",
+	.version = "0",
+	.irq = evt2irq(0x8A0),
+};
+
+static struct resource beu0_resources[] = {
+	[0] = {
+		.name	= "BEU0",
+		.start	= 0xfe930000,
+		.end	= 0xfe933400,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device beu0_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 6,
+	.dev = {
+		.platform_data	= &beu0_platform_data,
+	},
+	.resource	= beu0_resources,
+	.num_resources	= ARRAY_SIZE(beu0_resources),
+};
+
+/* BEU1 */
+static struct uio_info beu1_platform_data = {
+	.name = "BEU1",
+	.version = "0",
+	.irq = evt2irq(0xA00),
+};
+
+static struct resource beu1_resources[] = {
+	[0] = {
+		.name	= "BEU1",
+		.start	= 0xfe940000,
+		.end	= 0xfe943400,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device beu1_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 7,
+	.dev = {
+		.platform_data	= &beu1_platform_data,
+	},
+	.resource	= beu1_resources,
+	.num_resources	= ARRAY_SIZE(beu1_resources),
+};
+
+static struct sh_timer_config cmt_platform_data = {
+	.channels_mask = 0x20,
+};
+
+static struct resource cmt_resources[] = {
+	DEFINE_RES_MEM(0x044a0000, 0x70),
+	DEFINE_RES_IRQ(evt2irq(0xf00)),
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh-cmt-32",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80000, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0x400)),
+	DEFINE_RES_IRQ(evt2irq(0x420)),
+	DEFINE_RES_IRQ(evt2irq(0x440)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu1_resources[] = {
+	DEFINE_RES_MEM(0xffd90000, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0x920)),
+	DEFINE_RES_IRQ(evt2irq(0x940)),
+	DEFINE_RES_IRQ(evt2irq(0x960)),
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh-tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+/* JPU */
+static struct uio_info jpu_platform_data = {
+	.name = "JPU",
+	.version = "0",
+	.irq = evt2irq(0x560),
+};
+
+static struct resource jpu_resources[] = {
+	[0] = {
+		.name	= "JPU",
+		.start	= 0xfe980000,
+		.end	= 0xfe9902d3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device jpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 3,
+	.dev = {
+		.platform_data	= &jpu_platform_data,
+	},
+	.resource	= jpu_resources,
+	.num_resources	= ARRAY_SIZE(jpu_resources),
+};
+
+/* SPU2DSP0 */
+static struct uio_info spu0_platform_data = {
+	.name = "SPU2DSP0",
+	.version = "0",
+	.irq = evt2irq(0xcc0),
+};
+
+static struct resource spu0_resources[] = {
+	[0] = {
+		.name	= "SPU2DSP0",
+		.start	= 0xFE200000,
+		.end	= 0xFE2FFFFF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device spu0_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 4,
+	.dev = {
+		.platform_data	= &spu0_platform_data,
+	},
+	.resource	= spu0_resources,
+	.num_resources	= ARRAY_SIZE(spu0_resources),
+};
+
+/* SPU2DSP1 */
+static struct uio_info spu1_platform_data = {
+	.name = "SPU2DSP1",
+	.version = "0",
+	.irq = evt2irq(0xce0),
+};
+
+static struct resource spu1_resources[] = {
+	[0] = {
+		.name	= "SPU2DSP1",
+		.start	= 0xFE300000,
+		.end	= 0xFE3FFFFF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device spu1_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 5,
+	.dev = {
+		.platform_data	= &spu1_platform_data,
+	},
+	.resource	= spu1_resources,
+	.num_resources	= ARRAY_SIZE(spu1_resources),
+};
+
+static struct platform_device *sh7724_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&cmt_device,
+	&tmu0_device,
+	&tmu1_device,
+	&dma0_device,
+	&dma1_device,
+	&rtc_device,
+	&iic0_device,
+	&iic1_device,
+	&vpu_device,
+	&veu0_device,
+	&veu1_device,
+	&beu0_device,
+	&beu1_device,
+	&jpu_device,
+	&spu0_device,
+	&spu1_device,
+};
+
+static int __init sh7724_devices_setup(void)
+{
+	platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+	platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+	platform_resource_setup_memory(&jpu_device,  "jpu",  2 << 20);
+	platform_resource_setup_memory(&spu0_device, "spu0", 2 << 20);
+	platform_resource_setup_memory(&spu1_device, "spu1", 2 << 20);
+
+	return platform_add_devices(sh7724_devices,
+				    ARRAY_SIZE(sh7724_devices));
+}
+arch_initcall(sh7724_devices_setup);
+
+static struct platform_device *sh7724_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&cmt_device,
+	&tmu0_device,
+	&tmu1_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7724_early_devices,
+				   ARRAY_SIZE(sh7724_early_devices));
+}
+
+#define RAMCR_CACHE_L2FC	0x0002
+#define RAMCR_CACHE_L2E		0x0001
+#define L2_CACHE_ENABLE		(RAMCR_CACHE_L2E|RAMCR_CACHE_L2FC)
+
+void l2_cache_init(void)
+{
+	/* Enable L2 cache */
+	__raw_writel(L2_CACHE_ENABLE, RAMCR);
+}
+
+enum {
+	UNUSED = 0,
+	ENABLED,
+	DISABLED,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	HUDI,
+	DMAC1A_DEI0, DMAC1A_DEI1, DMAC1A_DEI2, DMAC1A_DEI3,
+	_2DG_TRI, _2DG_INI, _2DG_CEI,
+	DMAC0A_DEI0, DMAC0A_DEI1, DMAC0A_DEI2, DMAC0A_DEI3,
+	VIO_CEU0, VIO_BEU0, VIO_VEU1, VIO_VOU,
+	SCIFA3,
+	VPU,
+	TPU,
+	CEU1,
+	BEU1,
+	USB0, USB1,
+	ATAPI,
+	RTC_ATI, RTC_PRI, RTC_CUI,
+	DMAC1B_DEI4, DMAC1B_DEI5, DMAC1B_DADERR,
+	DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR,
+	KEYSC,
+	SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2,
+	VEU0,
+	MSIOF_MSIOFI0, MSIOF_MSIOFI1,
+	SPU_SPUI0, SPU_SPUI1,
+	SCIFA4,
+	ICB,
+	ETHI,
+	I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
+	I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
+	CMT,
+	TSIF,
+	FSI,
+	SCIFA5,
+	TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
+	IRDA,
+	JPU,
+	_2DDMAC,
+	MMC_MMC2I, MMC_MMC3I,
+	LCDC,
+	TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2,
+
+	/* interrupt groups */
+	DMAC1A, _2DG, DMAC0A, VIO, USB, RTC,
+	DMAC1B, DMAC0B, I2C0, I2C1, SDHI0, SDHI1, SPU, MMCIF,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+	INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
+
+	INTC_VECT(DMAC1A_DEI0, 0x700),
+	INTC_VECT(DMAC1A_DEI1, 0x720),
+	INTC_VECT(DMAC1A_DEI2, 0x740),
+	INTC_VECT(DMAC1A_DEI3, 0x760),
+
+	INTC_VECT(_2DG_TRI, 0x780),
+	INTC_VECT(_2DG_INI, 0x7A0),
+	INTC_VECT(_2DG_CEI, 0x7C0),
+
+	INTC_VECT(DMAC0A_DEI0, 0x800),
+	INTC_VECT(DMAC0A_DEI1, 0x820),
+	INTC_VECT(DMAC0A_DEI2, 0x840),
+	INTC_VECT(DMAC0A_DEI3, 0x860),
+
+	INTC_VECT(VIO_CEU0, 0x880),
+	INTC_VECT(VIO_BEU0, 0x8A0),
+	INTC_VECT(VIO_VEU1, 0x8C0),
+	INTC_VECT(VIO_VOU,  0x8E0),
+
+	INTC_VECT(SCIFA3, 0x900),
+	INTC_VECT(VPU,    0x980),
+	INTC_VECT(TPU,    0x9A0),
+	INTC_VECT(CEU1,   0x9E0),
+	INTC_VECT(BEU1,   0xA00),
+	INTC_VECT(USB0,   0xA20),
+	INTC_VECT(USB1,   0xA40),
+	INTC_VECT(ATAPI,  0xA60),
+
+	INTC_VECT(RTC_ATI, 0xA80),
+	INTC_VECT(RTC_PRI, 0xAA0),
+	INTC_VECT(RTC_CUI, 0xAC0),
+
+	INTC_VECT(DMAC1B_DEI4, 0xB00),
+	INTC_VECT(DMAC1B_DEI5, 0xB20),
+	INTC_VECT(DMAC1B_DADERR, 0xB40),
+
+	INTC_VECT(DMAC0B_DEI4, 0xB80),
+	INTC_VECT(DMAC0B_DEI5, 0xBA0),
+	INTC_VECT(DMAC0B_DADERR, 0xBC0),
+
+	INTC_VECT(KEYSC,      0xBE0),
+	INTC_VECT(SCIF_SCIF0, 0xC00),
+	INTC_VECT(SCIF_SCIF1, 0xC20),
+	INTC_VECT(SCIF_SCIF2, 0xC40),
+	INTC_VECT(VEU0,       0xC60),
+	INTC_VECT(MSIOF_MSIOFI0, 0xC80),
+	INTC_VECT(MSIOF_MSIOFI1, 0xCA0),
+	INTC_VECT(SPU_SPUI0, 0xCC0),
+	INTC_VECT(SPU_SPUI1, 0xCE0),
+	INTC_VECT(SCIFA4,    0xD00),
+
+	INTC_VECT(ICB,  0xD20),
+	INTC_VECT(ETHI, 0xD60),
+
+	INTC_VECT(I2C1_ALI, 0xD80),
+	INTC_VECT(I2C1_TACKI, 0xDA0),
+	INTC_VECT(I2C1_WAITI, 0xDC0),
+	INTC_VECT(I2C1_DTEI, 0xDE0),
+
+	INTC_VECT(I2C0_ALI, 0xE00),
+	INTC_VECT(I2C0_TACKI, 0xE20),
+	INTC_VECT(I2C0_WAITI, 0xE40),
+	INTC_VECT(I2C0_DTEI, 0xE60),
+
+	INTC_VECT(SDHI0, 0xE80),
+	INTC_VECT(SDHI0, 0xEA0),
+	INTC_VECT(SDHI0, 0xEC0),
+	INTC_VECT(SDHI0, 0xEE0),
+
+	INTC_VECT(CMT,    0xF00),
+	INTC_VECT(TSIF,   0xF20),
+	INTC_VECT(FSI,    0xF80),
+	INTC_VECT(SCIFA5, 0xFA0),
+
+	INTC_VECT(TMU0_TUNI0, 0x400),
+	INTC_VECT(TMU0_TUNI1, 0x420),
+	INTC_VECT(TMU0_TUNI2, 0x440),
+
+	INTC_VECT(IRDA,    0x480),
+
+	INTC_VECT(SDHI1, 0x4E0),
+	INTC_VECT(SDHI1, 0x500),
+	INTC_VECT(SDHI1, 0x520),
+
+	INTC_VECT(JPU, 0x560),
+	INTC_VECT(_2DDMAC, 0x4A0),
+
+	INTC_VECT(MMC_MMC2I, 0x5A0),
+	INTC_VECT(MMC_MMC3I, 0x5C0),
+
+	INTC_VECT(LCDC, 0xF40),
+
+	INTC_VECT(TMU1_TUNI0, 0x920),
+	INTC_VECT(TMU1_TUNI1, 0x940),
+	INTC_VECT(TMU1_TUNI2, 0x960),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(DMAC1A, DMAC1A_DEI0, DMAC1A_DEI1, DMAC1A_DEI2, DMAC1A_DEI3),
+	INTC_GROUP(_2DG, _2DG_TRI, _2DG_INI, _2DG_CEI),
+	INTC_GROUP(DMAC0A, DMAC0A_DEI0, DMAC0A_DEI1, DMAC0A_DEI2, DMAC0A_DEI3),
+	INTC_GROUP(VIO, VIO_CEU0, VIO_BEU0, VIO_VEU1, VIO_VOU),
+	INTC_GROUP(USB, USB0, USB1),
+	INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
+	INTC_GROUP(DMAC1B, DMAC1B_DEI4, DMAC1B_DEI5, DMAC1B_DADERR),
+	INTC_GROUP(DMAC0B, DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR),
+	INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
+	INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
+	INTC_GROUP(SPU, SPU_SPUI0, SPU_SPUI1),
+	INTC_GROUP(MMCIF, MMC_MMC2I, MMC_MMC3I),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
+	  { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
+	    0, ENABLED, ENABLED, ENABLED } },
+	{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
+	  { VIO_VOU, VIO_VEU1, VIO_BEU0, VIO_CEU0,
+	    DMAC0A_DEI3, DMAC0A_DEI2, DMAC0A_DEI1, DMAC0A_DEI0 } },
+	{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
+	  { 0, 0, 0, VPU, ATAPI, ETHI, 0, SCIFA3 } },
+	{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
+	  { DMAC1A_DEI3, DMAC1A_DEI2, DMAC1A_DEI1, DMAC1A_DEI0,
+	    SPU_SPUI1, SPU_SPUI0, BEU1, IRDA } },
+	{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
+	  { 0, TMU0_TUNI2, TMU0_TUNI1, TMU0_TUNI0,
+	    JPU, 0, 0, LCDC } },
+	{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
+	  { KEYSC, DMAC0B_DADERR, DMAC0B_DEI5, DMAC0B_DEI4,
+	    VEU0, SCIF_SCIF2, SCIF_SCIF1, SCIF_SCIF0 } },
+	{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
+	  { 0, 0, ICB, SCIFA4,
+	    CEU1, 0, MSIOF_MSIOFI1, MSIOF_MSIOFI0 } },
+	{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
+	  { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
+	    I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI } },
+	{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
+	  { DISABLED, ENABLED, ENABLED, ENABLED,
+	    0, 0, SCIFA5, FSI } },
+	{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
+	  { 0, 0, 0, CMT, 0, USB1, USB0, 0 } },
+	{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
+	  { 0, DMAC1B_DADERR, DMAC1B_DEI5, DMAC1B_DEI4,
+	    0, RTC_CUI, RTC_PRI, RTC_ATI } },
+	{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
+	  { 0, _2DG_CEI, _2DG_INI, _2DG_TRI,
+	    0, TPU, 0, TSIF } },
+	{ 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */
+	  { 0, 0, MMC_MMC3I, MMC_MMC2I, 0, 0, 0, _2DDMAC } },
+	{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1,
+					     TMU0_TUNI2, IRDA } },
+	{ 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, DMAC1A, BEU1 } },
+	{ 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1,
+					     TMU1_TUNI2, SPU } },
+	{ 0xa408000c, 0, 16, 4, /* IPRD */ { 0, MMCIF, 0, ATAPI } },
+	{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0A, VIO, SCIFA3, VPU } },
+	{ 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC0B, USB, CMT } },
+	{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1,
+					     SCIF_SCIF2, VEU0 } },
+	{ 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0, MSIOF_MSIOFI1,
+					     I2C1, I2C0 } },
+	{ 0xa4080020, 0, 16, 4, /* IPRI */ { SCIFA4, ICB, TSIF, _2DG } },
+	{ 0xa4080024, 0, 16, 4, /* IPRJ */ { CEU1, ETHI, FSI, SDHI1 } },
+	{ 0xa4080028, 0, 16, 4, /* IPRK */ { RTC, DMAC1B, 0, SDHI0 } },
+	{ 0xa408002c, 0, 16, 4, /* IPRL */ { SCIFA5, 0, TPU, _2DDMAC } },
+	{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xa414001c, 16, 2, /* ICR1 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_desc intc_desc __initdata = {
+	.name = "sh7724",
+	.force_enable = ENABLED,
+	.force_disable = DISABLED,
+	.hw = INTC_HW_DESC(vectors, groups, mask_registers,
+			   prio_registers, sense_registers, ack_registers),
+};
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
+
+static struct {
+	/* BSC */
+	unsigned long mmselr;
+	unsigned long cs0bcr;
+	unsigned long cs4bcr;
+	unsigned long cs5abcr;
+	unsigned long cs5bbcr;
+	unsigned long cs6abcr;
+	unsigned long cs6bbcr;
+	unsigned long cs4wcr;
+	unsigned long cs5awcr;
+	unsigned long cs5bwcr;
+	unsigned long cs6awcr;
+	unsigned long cs6bwcr;
+	/* INTC */
+	unsigned short ipra;
+	unsigned short iprb;
+	unsigned short iprc;
+	unsigned short iprd;
+	unsigned short ipre;
+	unsigned short iprf;
+	unsigned short iprg;
+	unsigned short iprh;
+	unsigned short ipri;
+	unsigned short iprj;
+	unsigned short iprk;
+	unsigned short iprl;
+	unsigned char imr0;
+	unsigned char imr1;
+	unsigned char imr2;
+	unsigned char imr3;
+	unsigned char imr4;
+	unsigned char imr5;
+	unsigned char imr6;
+	unsigned char imr7;
+	unsigned char imr8;
+	unsigned char imr9;
+	unsigned char imr10;
+	unsigned char imr11;
+	unsigned char imr12;
+	/* RWDT */
+	unsigned short rwtcnt;
+	unsigned short rwtcsr;
+	/* CPG */
+	unsigned long irdaclk;
+	unsigned long spuclk;
+} sh7724_rstandby_state;
+
+static int sh7724_pre_sleep_notifier_call(struct notifier_block *nb,
+					  unsigned long flags, void *unused)
+{
+	if (!(flags & SUSP_SH_RSTANDBY))
+		return NOTIFY_DONE;
+
+	/* BCR */
+	sh7724_rstandby_state.mmselr = __raw_readl(0xff800020); /* MMSELR */
+	sh7724_rstandby_state.mmselr |= 0xa5a50000;
+	sh7724_rstandby_state.cs0bcr = __raw_readl(0xfec10004); /* CS0BCR */
+	sh7724_rstandby_state.cs4bcr = __raw_readl(0xfec10010); /* CS4BCR */
+	sh7724_rstandby_state.cs5abcr = __raw_readl(0xfec10014); /* CS5ABCR */
+	sh7724_rstandby_state.cs5bbcr = __raw_readl(0xfec10018); /* CS5BBCR */
+	sh7724_rstandby_state.cs6abcr = __raw_readl(0xfec1001c); /* CS6ABCR */
+	sh7724_rstandby_state.cs6bbcr = __raw_readl(0xfec10020); /* CS6BBCR */
+	sh7724_rstandby_state.cs4wcr = __raw_readl(0xfec10030); /* CS4WCR */
+	sh7724_rstandby_state.cs5awcr = __raw_readl(0xfec10034); /* CS5AWCR */
+	sh7724_rstandby_state.cs5bwcr = __raw_readl(0xfec10038); /* CS5BWCR */
+	sh7724_rstandby_state.cs6awcr = __raw_readl(0xfec1003c); /* CS6AWCR */
+	sh7724_rstandby_state.cs6bwcr = __raw_readl(0xfec10040); /* CS6BWCR */
+
+	/* INTC */
+	sh7724_rstandby_state.ipra = __raw_readw(0xa4080000); /* IPRA */
+	sh7724_rstandby_state.iprb = __raw_readw(0xa4080004); /* IPRB */
+	sh7724_rstandby_state.iprc = __raw_readw(0xa4080008); /* IPRC */
+	sh7724_rstandby_state.iprd = __raw_readw(0xa408000c); /* IPRD */
+	sh7724_rstandby_state.ipre = __raw_readw(0xa4080010); /* IPRE */
+	sh7724_rstandby_state.iprf = __raw_readw(0xa4080014); /* IPRF */
+	sh7724_rstandby_state.iprg = __raw_readw(0xa4080018); /* IPRG */
+	sh7724_rstandby_state.iprh = __raw_readw(0xa408001c); /* IPRH */
+	sh7724_rstandby_state.ipri = __raw_readw(0xa4080020); /* IPRI */
+	sh7724_rstandby_state.iprj = __raw_readw(0xa4080024); /* IPRJ */
+	sh7724_rstandby_state.iprk = __raw_readw(0xa4080028); /* IPRK */
+	sh7724_rstandby_state.iprl = __raw_readw(0xa408002c); /* IPRL */
+	sh7724_rstandby_state.imr0 = __raw_readb(0xa4080080); /* IMR0 */
+	sh7724_rstandby_state.imr1 = __raw_readb(0xa4080084); /* IMR1 */
+	sh7724_rstandby_state.imr2 = __raw_readb(0xa4080088); /* IMR2 */
+	sh7724_rstandby_state.imr3 = __raw_readb(0xa408008c); /* IMR3 */
+	sh7724_rstandby_state.imr4 = __raw_readb(0xa4080090); /* IMR4 */
+	sh7724_rstandby_state.imr5 = __raw_readb(0xa4080094); /* IMR5 */
+	sh7724_rstandby_state.imr6 = __raw_readb(0xa4080098); /* IMR6 */
+	sh7724_rstandby_state.imr7 = __raw_readb(0xa408009c); /* IMR7 */
+	sh7724_rstandby_state.imr8 = __raw_readb(0xa40800a0); /* IMR8 */
+	sh7724_rstandby_state.imr9 = __raw_readb(0xa40800a4); /* IMR9 */
+	sh7724_rstandby_state.imr10 = __raw_readb(0xa40800a8); /* IMR10 */
+	sh7724_rstandby_state.imr11 = __raw_readb(0xa40800ac); /* IMR11 */
+	sh7724_rstandby_state.imr12 = __raw_readb(0xa40800b0); /* IMR12 */
+
+	/* RWDT */
+	sh7724_rstandby_state.rwtcnt = __raw_readb(0xa4520000); /* RWTCNT */
+	sh7724_rstandby_state.rwtcnt |= 0x5a00;
+	sh7724_rstandby_state.rwtcsr = __raw_readb(0xa4520004); /* RWTCSR */
+	sh7724_rstandby_state.rwtcsr |= 0xa500;
+	__raw_writew(sh7724_rstandby_state.rwtcsr & 0x07, 0xa4520004);
+
+	/* CPG */
+	sh7724_rstandby_state.irdaclk = __raw_readl(0xa4150018); /* IRDACLKCR */
+	sh7724_rstandby_state.spuclk = __raw_readl(0xa415003c); /* SPUCLKCR */
+
+	return NOTIFY_DONE;
+}
+
+static int sh7724_post_sleep_notifier_call(struct notifier_block *nb,
+					   unsigned long flags, void *unused)
+{
+	if (!(flags & SUSP_SH_RSTANDBY))
+		return NOTIFY_DONE;
+
+	/* BCR */
+	__raw_writel(sh7724_rstandby_state.mmselr, 0xff800020); /* MMSELR */
+	__raw_writel(sh7724_rstandby_state.cs0bcr, 0xfec10004); /* CS0BCR */
+	__raw_writel(sh7724_rstandby_state.cs4bcr, 0xfec10010); /* CS4BCR */
+	__raw_writel(sh7724_rstandby_state.cs5abcr, 0xfec10014); /* CS5ABCR */
+	__raw_writel(sh7724_rstandby_state.cs5bbcr, 0xfec10018); /* CS5BBCR */
+	__raw_writel(sh7724_rstandby_state.cs6abcr, 0xfec1001c); /* CS6ABCR */
+	__raw_writel(sh7724_rstandby_state.cs6bbcr, 0xfec10020); /* CS6BBCR */
+	__raw_writel(sh7724_rstandby_state.cs4wcr, 0xfec10030); /* CS4WCR */
+	__raw_writel(sh7724_rstandby_state.cs5awcr, 0xfec10034); /* CS5AWCR */
+	__raw_writel(sh7724_rstandby_state.cs5bwcr, 0xfec10038); /* CS5BWCR */
+	__raw_writel(sh7724_rstandby_state.cs6awcr, 0xfec1003c); /* CS6AWCR */
+	__raw_writel(sh7724_rstandby_state.cs6bwcr, 0xfec10040); /* CS6BWCR */
+
+	/* INTC */
+	__raw_writew(sh7724_rstandby_state.ipra, 0xa4080000); /* IPRA */
+	__raw_writew(sh7724_rstandby_state.iprb, 0xa4080004); /* IPRB */
+	__raw_writew(sh7724_rstandby_state.iprc, 0xa4080008); /* IPRC */
+	__raw_writew(sh7724_rstandby_state.iprd, 0xa408000c); /* IPRD */
+	__raw_writew(sh7724_rstandby_state.ipre, 0xa4080010); /* IPRE */
+	__raw_writew(sh7724_rstandby_state.iprf, 0xa4080014); /* IPRF */
+	__raw_writew(sh7724_rstandby_state.iprg, 0xa4080018); /* IPRG */
+	__raw_writew(sh7724_rstandby_state.iprh, 0xa408001c); /* IPRH */
+	__raw_writew(sh7724_rstandby_state.ipri, 0xa4080020); /* IPRI */
+	__raw_writew(sh7724_rstandby_state.iprj, 0xa4080024); /* IPRJ */
+	__raw_writew(sh7724_rstandby_state.iprk, 0xa4080028); /* IPRK */
+	__raw_writew(sh7724_rstandby_state.iprl, 0xa408002c); /* IPRL */
+	__raw_writeb(sh7724_rstandby_state.imr0, 0xa4080080); /* IMR0 */
+	__raw_writeb(sh7724_rstandby_state.imr1, 0xa4080084); /* IMR1 */
+	__raw_writeb(sh7724_rstandby_state.imr2, 0xa4080088); /* IMR2 */
+	__raw_writeb(sh7724_rstandby_state.imr3, 0xa408008c); /* IMR3 */
+	__raw_writeb(sh7724_rstandby_state.imr4, 0xa4080090); /* IMR4 */
+	__raw_writeb(sh7724_rstandby_state.imr5, 0xa4080094); /* IMR5 */
+	__raw_writeb(sh7724_rstandby_state.imr6, 0xa4080098); /* IMR6 */
+	__raw_writeb(sh7724_rstandby_state.imr7, 0xa408009c); /* IMR7 */
+	__raw_writeb(sh7724_rstandby_state.imr8, 0xa40800a0); /* IMR8 */
+	__raw_writeb(sh7724_rstandby_state.imr9, 0xa40800a4); /* IMR9 */
+	__raw_writeb(sh7724_rstandby_state.imr10, 0xa40800a8); /* IMR10 */
+	__raw_writeb(sh7724_rstandby_state.imr11, 0xa40800ac); /* IMR11 */
+	__raw_writeb(sh7724_rstandby_state.imr12, 0xa40800b0); /* IMR12 */
+
+	/* RWDT */
+	__raw_writew(sh7724_rstandby_state.rwtcnt, 0xa4520000); /* RWTCNT */
+	__raw_writew(sh7724_rstandby_state.rwtcsr, 0xa4520004); /* RWTCSR */
+
+	/* CPG */
+	__raw_writel(sh7724_rstandby_state.irdaclk, 0xa4150018); /* IRDACLKCR */
+	__raw_writel(sh7724_rstandby_state.spuclk, 0xa415003c); /* SPUCLKCR */
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block sh7724_pre_sleep_notifier = {
+	.notifier_call = sh7724_pre_sleep_notifier_call,
+	.priority = SH_MOBILE_PRE(SH_MOBILE_SLEEP_CPU),
+};
+
+static struct notifier_block sh7724_post_sleep_notifier = {
+	.notifier_call = sh7724_post_sleep_notifier_call,
+	.priority = SH_MOBILE_POST(SH_MOBILE_SLEEP_CPU),
+};
+
+static int __init sh7724_sleep_setup(void)
+{
+	atomic_notifier_chain_register(&sh_mobile_pre_sleep_notifier_list,
+				       &sh7724_pre_sleep_notifier);
+
+	atomic_notifier_chain_register(&sh_mobile_post_sleep_notifier_list,
+				       &sh7724_post_sleep_notifier);
+	return 0;
+}
+arch_initcall(sh7724_sleep_setup);
+
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7734.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7734.c
new file mode 100644
index 0000000..8c0c9da
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7734.c
@@ -0,0 +1,623 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/setup-sh7734.c
+
+ * SH7734 Setup
+ *
+ * Copyright (C) 2011,2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * Copyright (C) 2011,2012 Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+#include <asm/irq.h>
+#include <cpu/sh7734.h>
+
+/* SCIF */
+static struct plat_sci_port scif0_platform_data = {
+	.scscr          = SCSCR_REIE,
+	.type           = PORT_SCIF,
+	.regtype        = SCIx_SH4_SCIF_BRG_REGTYPE,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe40000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x8c0)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr          = SCSCR_REIE,
+	.type           = PORT_SCIF,
+	.regtype        = SCIx_SH4_SCIF_BRG_REGTYPE,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffe41000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x8e0)),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data = &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr          = SCSCR_REIE,
+	.type           = PORT_SCIF,
+	.regtype        = SCIx_SH4_SCIF_BRG_REGTYPE,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffe42000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x900)),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data = &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.scscr          = SCSCR_REIE | SCSCR_TOIE,
+	.type           = PORT_SCIF,
+	.regtype        = SCIx_SH4_SCIF_BRG_REGTYPE,
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xffe43000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x920)),
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.scscr          = SCSCR_REIE,
+	.type           = PORT_SCIF,
+	.regtype        = SCIx_SH4_SCIF_BRG_REGTYPE,
+};
+
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xffe44000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x940)),
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.scscr          = SCSCR_REIE,
+	.type           = PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_BRG_REGTYPE,
+};
+
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xffe43000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x960)),
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+/* RTC */
+static struct resource rtc_resources[] = {
+	[0] = {
+		.name	= "rtc",
+		.start	= 0xFFFC5000,
+		.end	= 0xFFFC5000 + 0x26 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.start	= evt2irq(0xC00),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+/* I2C 0 */
+static struct resource i2c0_resources[] = {
+	[0] = {
+		.name	= "IIC0",
+		.start  = 0xFFC70000,
+		.end    = 0xFFC7000A - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x860),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c0_device = {
+	.name           = "i2c-sh7734",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(i2c0_resources),
+	.resource       = i2c0_resources,
+};
+
+/* TMU */
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80000, 0x30),
+	DEFINE_RES_IRQ(evt2irq(0x400)),
+	DEFINE_RES_IRQ(evt2irq(0x420)),
+	DEFINE_RES_IRQ(evt2irq(0x440)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu1_resources[] = {
+	DEFINE_RES_MEM(0xffd81000, 0x30),
+	DEFINE_RES_IRQ(evt2irq(0x480)),
+	DEFINE_RES_IRQ(evt2irq(0x4a0)),
+	DEFINE_RES_IRQ(evt2irq(0x4c0)),
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh-tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu2_resources[] = {
+	DEFINE_RES_MEM(0xffd82000, 0x30),
+	DEFINE_RES_IRQ(evt2irq(0x500)),
+	DEFINE_RES_IRQ(evt2irq(0x520)),
+	DEFINE_RES_IRQ(evt2irq(0x540)),
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh-tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
+static struct platform_device *sh7734_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&rtc_device,
+};
+
+static struct platform_device *sh7734_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7734_early_devices,
+		ARRAY_SIZE(sh7734_early_devices));
+}
+
+#define GROUP 0
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+
+	IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+	IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+	IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+	IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
+
+	IRQ0, IRQ1, IRQ2, IRQ3,
+	DU,
+	TMU00, TMU10, TMU20, TMU21,
+	TMU30, TMU40, TMU50, TMU51,
+	TMU60, TMU70, TMU80,
+	RESET_WDT,
+	USB,
+	HUDI,
+	SHDMAC,
+	SSI0, SSI1,	SSI2, SSI3,
+	VIN0,
+	RGPVG,
+	_2DG,
+	MMC,
+	HSPI,
+	LBSCATA,
+	I2C0,
+	RCAN0,
+	MIMLB,
+	SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5,
+	LBSCDMAC0, LBSCDMAC1, LBSCDMAC2,
+	RCAN1,
+	SDHI0, SDHI1,
+	IEBUS,
+	HPBDMAC0_3, HPBDMAC4_10, HPBDMAC11_18, HPBDMAC19_22, HPBDMAC23_25_27_28,
+	RTC,
+	VIN1,
+	LCDC,
+	SRC0, SRC1,
+	GETHER,
+	SDHI2,
+	GPIO0_3, GPIO4_5,
+	STIF0, STIF1,
+	ADMAC,
+	HIF,
+	FLCTL,
+	ADC,
+	MTU2,
+	RSPI,
+	QSPI,
+	HSCIF,
+	VEU3F_VE3,
+
+	/* Group */
+	/* Mask */
+	STIF_M,
+	GPIO_M,
+	HPBDMAC_M,
+	LBSCDMAC_M,
+	RCAN_M,
+	SRC_M,
+	SCIF_M,
+	LCDC_M,
+	_2DG_M,
+	VIN_M,
+	TMU_3_M,
+	TMU_0_M,
+
+	/* Priority */
+	RCAN_P,
+	LBSCDMAC_P,
+
+	/* Common */
+	SDHI,
+	SSI,
+	SPI,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(DU, 0x3E0),
+	INTC_VECT(TMU00, 0x400),
+	INTC_VECT(TMU10, 0x420),
+	INTC_VECT(TMU20, 0x440),
+	INTC_VECT(TMU30, 0x480),
+	INTC_VECT(TMU40, 0x4A0),
+	INTC_VECT(TMU50, 0x4C0),
+	INTC_VECT(TMU51, 0x4E0),
+	INTC_VECT(TMU60, 0x500),
+	INTC_VECT(TMU70, 0x520),
+	INTC_VECT(TMU80, 0x540),
+	INTC_VECT(RESET_WDT, 0x560),
+	INTC_VECT(USB, 0x580),
+	INTC_VECT(HUDI, 0x600),
+	INTC_VECT(SHDMAC, 0x620),
+	INTC_VECT(SSI0, 0x6C0),
+	INTC_VECT(SSI1, 0x6E0),
+	INTC_VECT(SSI2, 0x700),
+	INTC_VECT(SSI3, 0x720),
+	INTC_VECT(VIN0, 0x740),
+	INTC_VECT(RGPVG, 0x760),
+	INTC_VECT(_2DG, 0x780),
+	INTC_VECT(MMC, 0x7A0),
+	INTC_VECT(HSPI, 0x7E0),
+	INTC_VECT(LBSCATA, 0x840),
+	INTC_VECT(I2C0, 0x860),
+	INTC_VECT(RCAN0, 0x880),
+	INTC_VECT(SCIF0, 0x8A0),
+	INTC_VECT(SCIF1, 0x8C0),
+	INTC_VECT(SCIF2, 0x900),
+	INTC_VECT(SCIF3, 0x920),
+	INTC_VECT(SCIF4, 0x940),
+	INTC_VECT(SCIF5, 0x960),
+	INTC_VECT(LBSCDMAC0, 0x9E0),
+	INTC_VECT(LBSCDMAC1, 0xA00),
+	INTC_VECT(LBSCDMAC2, 0xA20),
+	INTC_VECT(RCAN1, 0xA60),
+	INTC_VECT(SDHI0, 0xAE0),
+	INTC_VECT(SDHI1, 0xB00),
+	INTC_VECT(IEBUS, 0xB20),
+	INTC_VECT(HPBDMAC0_3, 0xB60),
+	INTC_VECT(HPBDMAC4_10, 0xB80),
+	INTC_VECT(HPBDMAC11_18, 0xBA0),
+	INTC_VECT(HPBDMAC19_22, 0xBC0),
+	INTC_VECT(HPBDMAC23_25_27_28, 0xBE0),
+	INTC_VECT(RTC, 0xC00),
+	INTC_VECT(VIN1, 0xC20),
+	INTC_VECT(LCDC, 0xC40),
+	INTC_VECT(SRC0, 0xC60),
+	INTC_VECT(SRC1, 0xC80),
+	INTC_VECT(GETHER, 0xCA0),
+	INTC_VECT(SDHI2, 0xCC0),
+	INTC_VECT(GPIO0_3, 0xCE0),
+	INTC_VECT(GPIO4_5, 0xD00),
+	INTC_VECT(STIF0, 0xD20),
+	INTC_VECT(STIF1, 0xD40),
+	INTC_VECT(ADMAC, 0xDA0),
+	INTC_VECT(HIF, 0xDC0),
+	INTC_VECT(FLCTL, 0xDE0),
+	INTC_VECT(ADC, 0xE00),
+	INTC_VECT(MTU2, 0xE20),
+	INTC_VECT(RSPI, 0xE40),
+	INTC_VECT(QSPI, 0xE60),
+	INTC_VECT(HSCIF, 0xFC0),
+	INTC_VECT(VEU3F_VE3, 0xF40),
+};
+
+static struct intc_group groups[] __initdata = {
+	/* Common */
+	INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2),
+	INTC_GROUP(SPI, HSPI, RSPI, QSPI),
+	INTC_GROUP(SSI, SSI0, SSI1, SSI2, SSI3),
+
+	/* Mask group */
+	INTC_GROUP(STIF_M, STIF0, STIF1), /* 22 */
+	INTC_GROUP(GPIO_M, GPIO0_3, GPIO4_5), /* 21 */
+	INTC_GROUP(HPBDMAC_M, HPBDMAC0_3, HPBDMAC4_10, HPBDMAC11_18,
+			HPBDMAC19_22, HPBDMAC23_25_27_28), /* 19 */
+	INTC_GROUP(LBSCDMAC_M, LBSCDMAC0, LBSCDMAC1, LBSCDMAC2), /* 18 */
+	INTC_GROUP(RCAN_M, RCAN0, RCAN1, IEBUS), /* 17 */
+	INTC_GROUP(SRC_M, SRC0, SRC1), /* 16 */
+	INTC_GROUP(SCIF_M, SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5,
+			HSCIF), /* 14 */
+	INTC_GROUP(LCDC_M, LCDC, MIMLB), /* 13 */
+	INTC_GROUP(_2DG_M, _2DG, RGPVG), /* 12 */
+	INTC_GROUP(VIN_M, VIN0, VIN1), /* 10 */
+	INTC_GROUP(TMU_3_M, TMU30, TMU40, TMU50, TMU51,
+			TMU60, TMU60, TMU70, TMU80), /* 2 */
+	INTC_GROUP(TMU_0_M, TMU00, TMU10, TMU20, TMU21), /* 1 */
+
+	/* Priority group*/
+	INTC_GROUP(RCAN_P, RCAN0, RCAN1), /* INT2PRI5 */
+	INTC_GROUP(LBSCDMAC_P, LBSCDMAC0, LBSCDMAC1), /* INT2PRI5 */
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xFF804040, 0xFF804044, 32, /* INT2MSKRG / INT2MSKCR */
+	  { 0,
+		VEU3F_VE3,
+		SDHI, /* SDHI 0-2 */
+		ADMAC,
+		FLCTL,
+		RESET_WDT,
+		HIF,
+		ADC,
+		MTU2,
+		STIF_M, /* STIF 0,1 */
+		GPIO_M, /* GPIO 0-5*/
+		GETHER,
+		HPBDMAC_M, /* HPBDMAC 0_3 - 23_25_27_28 */
+		LBSCDMAC_M, /* LBSCDMAC 0 - 2 */
+		RCAN_M, /* RCAN, IEBUS */
+		SRC_M,	/* SRC 0,1 */
+		LBSCATA,
+		SCIF_M, /* SCIF 0-5, HSCIF */
+		LCDC_M, /* LCDC, MIMLB */
+		_2DG_M,	/* 2DG, RGPVG */
+		SPI, /* HSPI, RSPI, QSPI */
+		VIN_M,	/* VIN0, 1 */
+		SSI,	/* SSI 0-3 */
+		USB,
+		SHDMAC,
+		HUDI,
+		MMC,
+		RTC,
+		I2C0, /* I2C */ /* I2C 0, 1*/
+		TMU_3_M, /* TMU30 - TMU80 */
+		TMU_0_M, /* TMU00 - TMU21 */
+		DU } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xFF804000, 0, 32, 8, /* INT2PRI0 */
+		{ DU, TMU00, TMU10, TMU20 } },
+	{ 0xFF804004, 0, 32, 8, /* INT2PRI1 */
+		{ TMU30, TMU60, RTC, SDHI } },
+	{ 0xFF804008, 0, 32, 8, /* INT2PRI2 */
+		{ HUDI, SHDMAC, USB, SSI } },
+	{ 0xFF80400C, 0, 32, 8, /* INT2PRI3 */
+		{ VIN0, SPI, _2DG, LBSCATA } },
+	{ 0xFF804010, 0, 32, 8, /* INT2PRI4 */
+		{ SCIF0, SCIF3, HSCIF, LCDC } },
+	{ 0xFF804014, 0, 32, 8, /* INT2PRI5 */
+		{ RCAN_P, LBSCDMAC_P, LBSCDMAC2, MMC } },
+	{ 0xFF804018, 0, 32, 8, /* INT2PRI6 */
+		{ HPBDMAC0_3, HPBDMAC4_10, HPBDMAC11_18, HPBDMAC19_22 } },
+	{ 0xFF80401C, 0, 32, 8, /* INT2PRI7 */
+		{ HPBDMAC23_25_27_28, I2C0, SRC0, SRC1 } },
+	{ 0xFF804020, 0, 32, 8, /* INT2PRI8 */
+		{ 0 /* ADIF */, VIN1, RESET_WDT, HIF } },
+	{ 0xFF804024, 0, 32, 8, /* INT2PRI9 */
+		{ ADMAC, FLCTL, GPIO0_3, GPIO4_5 } },
+	{ 0xFF804028, 0, 32, 8, /* INT2PRI10 */
+		{ STIF0, STIF1, VEU3F_VE3, GETHER } },
+	{ 0xFF80402C, 0, 32, 8, /* INT2PRI11 */
+		{ MTU2, RGPVG, MIMLB, IEBUS } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7734", vectors, groups,
+	mask_registers, prio_registers, NULL);
+
+/* Support for external interrupt pins in IRQ mode */
+
+static struct intc_vect irq3210_vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
+	INTC_VECT(IRQ2, 0x2C0), INTC_VECT(IRQ3, 0x300),
+};
+
+static struct intc_sense_reg irq3210_sense_registers[] __initdata = {
+	{ 0xFF80201C, 32, 2, /* ICR1 */
+	{ IRQ0, IRQ1, IRQ2, IRQ3, } },
+};
+
+static struct intc_mask_reg irq3210_ack_registers[] __initdata = {
+	{ 0xFF802024, 0, 32, /* INTREQ */
+	{ IRQ0, IRQ1, IRQ2, IRQ3, } },
+};
+
+static struct intc_mask_reg irq3210_mask_registers[] __initdata = {
+	{ 0xFF802044, 0xFF802064, 32, /* INTMSK0 / INTMSKCLR0 */
+	{ IRQ0, IRQ1, IRQ2, IRQ3, } },
+};
+
+static struct intc_prio_reg irq3210_prio_registers[] __initdata = {
+	{ 0xFF802010, 0, 32, 4, /* INTPRI */
+	{ IRQ0, IRQ1, IRQ2, IRQ3, } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq3210, "sh7734-irq3210",
+	irq3210_vectors, NULL,
+	irq3210_mask_registers, irq3210_prio_registers,
+	irq3210_sense_registers, irq3210_ack_registers);
+
+/* External interrupt pins in IRL mode */
+
+static struct intc_vect vectors_irl3210[] __initdata = {
+	INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
+	INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
+	INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
+	INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
+	INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
+	INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
+	INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
+	INTC_VECT(IRL0_HHHL, 0x3c0),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irl3210, "sh7734-irl3210",
+	vectors_irl3210, NULL, mask_registers, NULL, NULL);
+
+#define INTC_ICR0		0xFF802000
+#define INTC_INTMSK0    0xFF802044
+#define INTC_INTMSK1    0xFF802048
+#define INTC_INTMSKCLR0 0xFF802064
+#define INTC_INTMSKCLR1 0xFF802068
+
+void __init plat_irq_setup(void)
+{
+	/* disable IRQ3-0 */
+	__raw_writel(0xF0000000, INTC_INTMSK0);
+
+	/* disable IRL3-0 */
+	__raw_writel(0x80000000, INTC_INTMSK1);
+
+	/* select IRL mode for IRL3-0 */
+	__raw_writel(__raw_readl(INTC_ICR0) & ~0x00800000, INTC_ICR0);
+
+	/* disable holding function, ie enable "SH-4 Mode (LVLMODE)" */
+	__raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+
+	register_intc_controller(&intc_desc);
+}
+
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ3210:
+		/* select IRQ mode for IRL3-0 */
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
+		register_intc_controller(&intc_desc_irq3210);
+		break;
+	case IRQ_MODE_IRL3210:
+		/* enable IRL0-3 but don't provide any masking */
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0xf0000000, INTC_INTMSKCLR0);
+		break;
+	case IRQ_MODE_IRL3210_MASK:
+		/* enable IRL0-3 and mask using cpu intc controller */
+		__raw_writel(0x80000000, INTC_INTMSKCLR0);
+		register_intc_controller(&intc_desc_irl3210);
+		break;
+	default:
+		BUG();
+	}
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
new file mode 100644
index 0000000..a46a19b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -0,0 +1,1244 @@
+/*
+ * SH7757 Setup
+ *
+ * Copyright (C) 2009, 2011  Renesas Solutions Corp.
+ *
+ *  based on setup-sh7785.c : Copyright (C) 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_dma.h>
+#include <linux/sh_intc.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <cpu/dma-register.h>
+#include <cpu/sh7757.h>
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xfe4b0000, 0x100),		/* SCIF2 */
+	DEFINE_RES_IRQ(evt2irq(0x700)),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xfe4c0000, 0x100),		/* SCIF3 */
+	DEFINE_RES_IRQ(evt2irq(0xb80)),
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xfe4d0000, 0x100),		/* SCIF4 */
+	DEFINE_RES_IRQ(evt2irq(0xf00)),
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 3,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xfe430000, 0x20),
+	DEFINE_RES_IRQ(evt2irq(0x580)),
+	DEFINE_RES_IRQ(evt2irq(0x5a0)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct resource spi0_resources[] = {
+	[0] = {
+		.start	= 0xfe002000,
+		.end	= 0xfe0020ff,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+	},
+	[1] = {
+		.start	= evt2irq(0xcc0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+/* DMA */
+static const struct sh_dmae_slave_config sh7757_dmae0_slaves[] = {
+	{
+		.slave_id	= SHDMA_SLAVE_SDHI_TX,
+		.addr		= 0x1fe50030,
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc5,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_SDHI_RX,
+		.addr		= 0x1fe50030,
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc6,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
+		.addr		= 0x1fcb0034,
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd3,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
+		.addr		= 0x1fcb0034,
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd7,
+	},
+};
+
+static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = {
+	{
+		.slave_id	= SHDMA_SLAVE_SCIF2_TX,
+		.addr		= 0x1f4b000c,
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x21,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_SCIF2_RX,
+		.addr		= 0x1f4b0014,
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x22,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_SCIF3_TX,
+		.addr		= 0x1f4c000c,
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x29,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_SCIF3_RX,
+		.addr		= 0x1f4c0014,
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2a,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_SCIF4_TX,
+		.addr		= 0x1f4d000c,
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x41,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_SCIF4_RX,
+		.addr		= 0x1f4d0014,
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x42,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RSPI_TX,
+		.addr		= 0xfe480004,
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc1,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RSPI_RX,
+		.addr		= 0xfe480004,
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc2,
+	},
+};
+
+static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC0_TX,
+		.addr		= 0x1e500012,
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x21,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC0_RX,
+		.addr		= 0x1e500013,
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x22,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC1_TX,
+		.addr		= 0x1e510012,
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x29,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC1_RX,
+		.addr		= 0x1e510013,
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2a,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC2_TX,
+		.addr		= 0x1e520012,
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0xa1,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC2_RX,
+		.addr		= 0x1e520013,
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0xa2,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC3_TX,
+		.addr		= 0x1e530012,
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0xa9,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC3_RX,
+		.addr		= 0x1e530013,
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0xaf,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC4_TX,
+		.addr		= 0x1e540012,
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0xc5,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC4_RX,
+		.addr		= 0x1e540013,
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0xc6,
+	},
+};
+
+static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = {
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC5_TX,
+		.addr		= 0x1e550012,
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x21,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC5_RX,
+		.addr		= 0x1e550013,
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x22,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC6_TX,
+		.addr		= 0x1e560012,
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x29,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC6_RX,
+		.addr		= 0x1e560013,
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2a,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC7_TX,
+		.addr		= 0x1e570012,
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x41,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC7_RX,
+		.addr		= 0x1e570013,
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x42,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC8_TX,
+		.addr		= 0x1e580012,
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x45,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC8_RX,
+		.addr		= 0x1e580013,
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x46,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC9_TX,
+		.addr		= 0x1e590012,
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x51,
+	},
+	{
+		.slave_id	= SHDMA_SLAVE_RIIC9_RX,
+		.addr		= 0x1e590013,
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
+				  TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x52,
+	},
+};
+
+static const struct sh_dmae_channel sh7757_dmae_channels[] = {
+	{
+		.offset = 0,
+		.dmars = 0,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x10,
+		.dmars = 0,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x20,
+		.dmars = 4,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x30,
+		.dmars = 4,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x50,
+		.dmars = 8,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x60,
+		.dmars = 8,
+		.dmars_bit = 8,
+	}
+};
+
+static const unsigned int ts_shift[] = TS_SHIFT;
+
+static struct sh_dmae_pdata dma0_platform_data = {
+	.slave		= sh7757_dmae0_slaves,
+	.slave_num	= ARRAY_SIZE(sh7757_dmae0_slaves),
+	.channel	= sh7757_dmae_channels,
+	.channel_num	= ARRAY_SIZE(sh7757_dmae_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+static struct sh_dmae_pdata dma1_platform_data = {
+	.slave		= sh7757_dmae1_slaves,
+	.slave_num	= ARRAY_SIZE(sh7757_dmae1_slaves),
+	.channel	= sh7757_dmae_channels,
+	.channel_num	= ARRAY_SIZE(sh7757_dmae_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+static struct sh_dmae_pdata dma2_platform_data = {
+	.slave		= sh7757_dmae2_slaves,
+	.slave_num	= ARRAY_SIZE(sh7757_dmae2_slaves),
+	.channel	= sh7757_dmae_channels,
+	.channel_num	= ARRAY_SIZE(sh7757_dmae_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+static struct sh_dmae_pdata dma3_platform_data = {
+	.slave		= sh7757_dmae3_slaves,
+	.slave_num	= ARRAY_SIZE(sh7757_dmae3_slaves),
+	.channel	= sh7757_dmae_channels,
+	.channel_num	= ARRAY_SIZE(sh7757_dmae_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+/* channel 0 to 5 */
+static struct resource sh7757_dmae0_resources[] = {
+	[0] = {
+		/* Channel registers and DMAOR */
+		.start	= 0xff608020,
+		.end	= 0xff60808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* DMARSx */
+		.start	= 0xff609000,
+		.end	= 0xff60900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "error_irq",
+		.start	= evt2irq(0x640),
+		.end	= evt2irq(0x640),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+};
+
+/* channel 6 to 11 */
+static struct resource sh7757_dmae1_resources[] = {
+	[0] = {
+		/* Channel registers and DMAOR */
+		.start	= 0xff618020,
+		.end	= 0xff61808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* DMARSx */
+		.start	= 0xff619000,
+		.end	= 0xff61900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "error_irq",
+		.start	= evt2irq(0x640),
+		.end	= evt2irq(0x640),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+	{
+		/* IRQ for channels 4 */
+		.start	= evt2irq(0x7c0),
+		.end	= evt2irq(0x7c0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+	{
+		/* IRQ for channels 5 */
+		.start	= evt2irq(0x7c0),
+		.end	= evt2irq(0x7c0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+	{
+		/* IRQ for channels 6 */
+		.start	= evt2irq(0xd00),
+		.end	= evt2irq(0xd00),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+	{
+		/* IRQ for channels 7 */
+		.start	= evt2irq(0xd00),
+		.end	= evt2irq(0xd00),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+	{
+		/* IRQ for channels 8 */
+		.start	= evt2irq(0xd00),
+		.end	= evt2irq(0xd00),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+	{
+		/* IRQ for channels 9 */
+		.start	= evt2irq(0xd00),
+		.end	= evt2irq(0xd00),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+	{
+		/* IRQ for channels 10 */
+		.start	= evt2irq(0xd00),
+		.end	= evt2irq(0xd00),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+	{
+		/* IRQ for channels 11 */
+		.start	= evt2irq(0xd00),
+		.end	= evt2irq(0xd00),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+};
+
+/* channel 12 to 17 */
+static struct resource sh7757_dmae2_resources[] = {
+	[0] = {
+		/* Channel registers and DMAOR */
+		.start	= 0xff708020,
+		.end	= 0xff70808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* DMARSx */
+		.start	= 0xff709000,
+		.end	= 0xff70900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "error_irq",
+		.start	= evt2irq(0x2a60),
+		.end	= evt2irq(0x2a60),
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 12 to 16 */
+		.start	= evt2irq(0x2400),
+		.end	= evt2irq(0x2480),
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channel 17 */
+		.start	= evt2irq(0x24e0),
+		.end	= evt2irq(0x24e0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+/* channel 18 to 23 */
+static struct resource sh7757_dmae3_resources[] = {
+	[0] = {
+		/* Channel registers and DMAOR */
+		.start	= 0xff718020,
+		.end	= 0xff71808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* DMARSx */
+		.start	= 0xff719000,
+		.end	= 0xff71900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "error_irq",
+		.start	= evt2irq(0x2a80),
+		.end	= evt2irq(0x2a80),
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 18 to 22 */
+		.start	= evt2irq(0x2500),
+		.end	= evt2irq(0x2580),
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channel 23 */
+		.start	= evt2irq(0x2600),
+		.end	= evt2irq(0x2600),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dma0_device = {
+	.name           = "sh-dma-engine",
+	.id             = 0,
+	.resource	= sh7757_dmae0_resources,
+	.num_resources	= ARRAY_SIZE(sh7757_dmae0_resources),
+	.dev            = {
+		.platform_data	= &dma0_platform_data,
+	},
+};
+
+static struct platform_device dma1_device = {
+	.name		= "sh-dma-engine",
+	.id		= 1,
+	.resource	= sh7757_dmae1_resources,
+	.num_resources	= ARRAY_SIZE(sh7757_dmae1_resources),
+	.dev		= {
+		.platform_data	= &dma1_platform_data,
+	},
+};
+
+static struct platform_device dma2_device = {
+	.name		= "sh-dma-engine",
+	.id		= 2,
+	.resource	= sh7757_dmae2_resources,
+	.num_resources	= ARRAY_SIZE(sh7757_dmae2_resources),
+	.dev		= {
+		.platform_data	= &dma2_platform_data,
+	},
+};
+
+static struct platform_device dma3_device = {
+	.name		= "sh-dma-engine",
+	.id		= 3,
+	.resource	= sh7757_dmae3_resources,
+	.num_resources	= ARRAY_SIZE(sh7757_dmae3_resources),
+	.dev		= {
+		.platform_data	= &dma3_platform_data,
+	},
+};
+
+static struct platform_device spi0_device = {
+	.name	= "sh_spi",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(spi0_resources),
+	.resource	= spi0_resources,
+};
+
+static struct resource spi1_resources[] = {
+	{
+		.start	= 0xffd8ee70,
+		.end	= 0xffd8eeff,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	{
+		.start	= evt2irq(0x8c0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device spi1_device = {
+	.name	= "sh_spi",
+	.id	= 1,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+	.resource	= spi1_resources,
+};
+
+static struct resource rspi_resources[] = {
+	{
+		.start	= 0xfe480000,
+		.end	= 0xfe4800ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= evt2irq(0x1d80),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rspi_device = {
+	.name	= "rspi",
+	.id	= 2,
+	.num_resources	= ARRAY_SIZE(rspi_resources),
+	.resource	= rspi_resources,
+};
+
+static struct resource usb_ehci_resources[] = {
+	[0] = {
+		.start	= 0xfe4f1000,
+		.end	= 0xfe4f10ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x920),
+		.end	= evt2irq(0x920),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_ehci_device = {
+	.name		= "sh_ehci",
+	.id		= -1,
+	.dev = {
+		.dma_mask = &usb_ehci_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(usb_ehci_resources),
+	.resource	= usb_ehci_resources,
+};
+
+static struct resource usb_ohci_resources[] = {
+	[0] = {
+		.start	= 0xfe4f1800,
+		.end	= 0xfe4f18ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x920),
+		.end	= evt2irq(0x920),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct usb_ohci_pdata usb_ohci_pdata;
+
+static struct platform_device usb_ohci_device = {
+	.name		= "ohci-platform",
+	.id		= -1,
+	.dev = {
+		.dma_mask = &usb_ohci_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data	= &usb_ohci_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(usb_ohci_resources),
+	.resource	= usb_ohci_resources,
+};
+
+static struct platform_device *sh7757_devices[] __initdata = {
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&tmu0_device,
+	&dma0_device,
+	&dma1_device,
+	&dma2_device,
+	&dma3_device,
+	&spi0_device,
+	&spi1_device,
+	&rspi_device,
+	&usb_ehci_device,
+	&usb_ohci_device,
+};
+
+static int __init sh7757_devices_setup(void)
+{
+	return platform_add_devices(sh7757_devices,
+				    ARRAY_SIZE(sh7757_devices));
+}
+arch_initcall(sh7757_devices_setup);
+
+static struct platform_device *sh7757_early_devices[] __initdata = {
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&tmu0_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7757_early_devices,
+				   ARRAY_SIZE(sh7757_early_devices));
+}
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+
+	IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+	IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+	IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+	IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
+
+	IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+	IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+	IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+	IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+
+	SDHI, DVC,
+	IRQ8, IRQ9, IRQ11, IRQ10, IRQ12, IRQ13, IRQ14, IRQ15,
+	TMU0, TMU1, TMU2, TMU2_TICPI, TMU3, TMU4, TMU5,
+	HUDI,
+	ARC4,
+	DMAC0_5, DMAC6_7, DMAC8_11,
+	SCIF0, SCIF1, SCIF2, SCIF3, SCIF4,
+	USB0, USB1,
+	JMC,
+	SPI0, SPI1,
+	TMR01, TMR23, TMR45,
+	FRT,
+	LPC, LPC5, LPC6, LPC7, LPC8,
+	PECI0, PECI1, PECI2, PECI3, PECI4, PECI5,
+	ETHERC,
+	ADC0, ADC1,
+	SIM,
+	IIC0_0, IIC0_1, IIC0_2, IIC0_3,
+	IIC1_0, IIC1_1, IIC1_2, IIC1_3,
+	IIC2_0, IIC2_1, IIC2_2, IIC2_3,
+	IIC3_0, IIC3_1, IIC3_2, IIC3_3,
+	IIC4_0, IIC4_1, IIC4_2, IIC4_3,
+	IIC5_0, IIC5_1, IIC5_2, IIC5_3,
+	IIC6_0, IIC6_1, IIC6_2, IIC6_3,
+	IIC7_0, IIC7_1, IIC7_2, IIC7_3,
+	IIC8_0, IIC8_1, IIC8_2, IIC8_3,
+	IIC9_0, IIC9_1, IIC9_2, IIC9_3,
+	ONFICTL,
+	MMC1, MMC2,
+	ECCU,
+	PCIC,
+	G200,
+	RSPI,
+	SGPIO,
+	DMINT12, DMINT13, DMINT14, DMINT15, DMINT16, DMINT17, DMINT18, DMINT19,
+	DMINT20, DMINT21, DMINT22, DMINT23,
+	DDRECC,
+	TSIP,
+	PCIE_BRIDGE,
+	WDT0B, WDT1B, WDT2B, WDT3B, WDT4B, WDT5B, WDT6B, WDT7B, WDT8B,
+	GETHER0, GETHER1, GETHER2,
+	PBIA, PBIB, PBIC,
+	DMAE2, DMAE3,
+	SERMUX2, SERMUX3,
+
+	/* interrupt groups */
+
+	TMU012, TMU345,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(SDHI, 0x480), INTC_VECT(SDHI, 0x04a0),
+	INTC_VECT(SDHI, 0x4c0),
+	INTC_VECT(DVC, 0x4e0),
+	INTC_VECT(IRQ8, 0x500), INTC_VECT(IRQ9, 0x520),
+	INTC_VECT(IRQ10, 0x540),
+	INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
+	INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
+	INTC_VECT(HUDI, 0x600),
+	INTC_VECT(ARC4, 0x620),
+	INTC_VECT(DMAC0_5, 0x640), INTC_VECT(DMAC0_5, 0x660),
+	INTC_VECT(DMAC0_5, 0x680), INTC_VECT(DMAC0_5, 0x6a0),
+	INTC_VECT(DMAC0_5, 0x6c0),
+	INTC_VECT(IRQ11, 0x6e0),
+	INTC_VECT(SCIF2, 0x700), INTC_VECT(SCIF2, 0x720),
+	INTC_VECT(SCIF2, 0x740), INTC_VECT(SCIF2, 0x760),
+	INTC_VECT(DMAC0_5, 0x780), INTC_VECT(DMAC0_5, 0x7a0),
+	INTC_VECT(DMAC6_7, 0x7c0), INTC_VECT(DMAC6_7, 0x7e0),
+	INTC_VECT(USB0, 0x840),
+	INTC_VECT(IRQ12, 0x880),
+	INTC_VECT(JMC, 0x8a0),
+	INTC_VECT(SPI1, 0x8c0),
+	INTC_VECT(IRQ13, 0x8e0), INTC_VECT(IRQ14, 0x900),
+	INTC_VECT(USB1, 0x920),
+	INTC_VECT(TMR01, 0xa00), INTC_VECT(TMR23, 0xa20),
+	INTC_VECT(TMR45, 0xa40),
+	INTC_VECT(FRT, 0xa80),
+	INTC_VECT(LPC, 0xaa0), INTC_VECT(LPC, 0xac0),
+	INTC_VECT(LPC, 0xae0), INTC_VECT(LPC, 0xb00),
+	INTC_VECT(LPC, 0xb20),
+	INTC_VECT(SCIF0, 0xb40), INTC_VECT(SCIF1, 0xb60),
+	INTC_VECT(SCIF3, 0xb80), INTC_VECT(SCIF3, 0xba0),
+	INTC_VECT(SCIF3, 0xbc0), INTC_VECT(SCIF3, 0xbe0),
+	INTC_VECT(PECI0, 0xc00), INTC_VECT(PECI1, 0xc20),
+	INTC_VECT(PECI2, 0xc40),
+	INTC_VECT(IRQ15, 0xc60),
+	INTC_VECT(ETHERC, 0xc80), INTC_VECT(ETHERC, 0xca0),
+	INTC_VECT(SPI0, 0xcc0),
+	INTC_VECT(ADC1, 0xce0),
+	INTC_VECT(DMAC8_11, 0xd00), INTC_VECT(DMAC8_11, 0xd20),
+	INTC_VECT(DMAC8_11, 0xd40), INTC_VECT(DMAC8_11, 0xd60),
+	INTC_VECT(SIM, 0xd80), INTC_VECT(SIM, 0xda0),
+	INTC_VECT(SIM, 0xdc0), INTC_VECT(SIM, 0xde0),
+	INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
+	INTC_VECT(TMU5, 0xe40),
+	INTC_VECT(ADC0, 0xe60),
+	INTC_VECT(SCIF4, 0xf00), INTC_VECT(SCIF4, 0xf20),
+	INTC_VECT(SCIF4, 0xf40), INTC_VECT(SCIF4, 0xf60),
+	INTC_VECT(IIC0_0, 0x1400), INTC_VECT(IIC0_1, 0x1420),
+	INTC_VECT(IIC0_2, 0x1440), INTC_VECT(IIC0_3, 0x1460),
+	INTC_VECT(IIC1_0, 0x1480), INTC_VECT(IIC1_1, 0x14e0),
+	INTC_VECT(IIC1_2, 0x1500), INTC_VECT(IIC1_3, 0x1520),
+	INTC_VECT(IIC2_0, 0x1540), INTC_VECT(IIC2_1, 0x1560),
+	INTC_VECT(IIC2_2, 0x1580), INTC_VECT(IIC2_3, 0x1600),
+	INTC_VECT(IIC3_0, 0x1620), INTC_VECT(IIC3_1, 0x1640),
+	INTC_VECT(IIC3_2, 0x16e0), INTC_VECT(IIC3_3, 0x1700),
+	INTC_VECT(IIC4_0, 0x17c0), INTC_VECT(IIC4_1, 0x1800),
+	INTC_VECT(IIC4_2, 0x1820), INTC_VECT(IIC4_3, 0x1840),
+	INTC_VECT(IIC5_0, 0x1860), INTC_VECT(IIC5_1, 0x1880),
+	INTC_VECT(IIC5_2, 0x18a0), INTC_VECT(IIC5_3, 0x18c0),
+	INTC_VECT(IIC6_0, 0x18e0), INTC_VECT(IIC6_1, 0x1900),
+	INTC_VECT(IIC6_2, 0x1920),
+	INTC_VECT(ONFICTL, 0x1960),
+	INTC_VECT(IIC6_3, 0x1980),
+	INTC_VECT(IIC7_0, 0x19a0), INTC_VECT(IIC7_1, 0x1a00),
+	INTC_VECT(IIC7_2, 0x1a20), INTC_VECT(IIC7_3, 0x1a40),
+	INTC_VECT(IIC8_0, 0x1a60), INTC_VECT(IIC8_1, 0x1a80),
+	INTC_VECT(IIC8_2, 0x1aa0), INTC_VECT(IIC8_3, 0x1b40),
+	INTC_VECT(IIC9_0, 0x1b60), INTC_VECT(IIC9_1, 0x1b80),
+	INTC_VECT(IIC9_2, 0x1c00), INTC_VECT(IIC9_3, 0x1c20),
+	INTC_VECT(MMC1, 0x1c60), INTC_VECT(MMC2, 0x1c80),
+	INTC_VECT(ECCU, 0x1cc0),
+	INTC_VECT(PCIC, 0x1ce0),
+	INTC_VECT(G200, 0x1d00),
+	INTC_VECT(RSPI, 0x1d80), INTC_VECT(RSPI, 0x1da0),
+	INTC_VECT(RSPI, 0x1dc0), INTC_VECT(RSPI, 0x1de0),
+	INTC_VECT(PECI3, 0x1ec0), INTC_VECT(PECI4, 0x1ee0),
+	INTC_VECT(PECI5, 0x1f00),
+	INTC_VECT(SGPIO, 0x1f80), INTC_VECT(SGPIO, 0x1fa0),
+	INTC_VECT(SGPIO, 0x1fc0),
+	INTC_VECT(DMINT12, 0x2400), INTC_VECT(DMINT13, 0x2420),
+	INTC_VECT(DMINT14, 0x2440), INTC_VECT(DMINT15, 0x2460),
+	INTC_VECT(DMINT16, 0x2480), INTC_VECT(DMINT17, 0x24e0),
+	INTC_VECT(DMINT18, 0x2500), INTC_VECT(DMINT19, 0x2520),
+	INTC_VECT(DMINT20, 0x2540), INTC_VECT(DMINT21, 0x2560),
+	INTC_VECT(DMINT22, 0x2580), INTC_VECT(DMINT23, 0x2600),
+	INTC_VECT(DDRECC, 0x2620),
+	INTC_VECT(TSIP, 0x2640),
+	INTC_VECT(PCIE_BRIDGE, 0x27c0),
+	INTC_VECT(WDT0B, 0x2800), INTC_VECT(WDT1B, 0x2820),
+	INTC_VECT(WDT2B, 0x2840), INTC_VECT(WDT3B, 0x2860),
+	INTC_VECT(WDT4B, 0x2880), INTC_VECT(WDT5B, 0x28a0),
+	INTC_VECT(WDT6B, 0x28c0), INTC_VECT(WDT7B, 0x28e0),
+	INTC_VECT(WDT8B, 0x2900),
+	INTC_VECT(GETHER0, 0x2960), INTC_VECT(GETHER1, 0x2980),
+	INTC_VECT(GETHER2, 0x29a0),
+	INTC_VECT(PBIA, 0x2a00), INTC_VECT(PBIB, 0x2a20),
+	INTC_VECT(PBIC, 0x2a40),
+	INTC_VECT(DMAE2, 0x2a60), INTC_VECT(DMAE3, 0x2a80),
+	INTC_VECT(SERMUX2, 0x2aa0), INTC_VECT(SERMUX3, 0x2b40),
+	INTC_VECT(LPC5, 0x2b60), INTC_VECT(LPC6, 0x2b80),
+	INTC_VECT(LPC7, 0x2c00), INTC_VECT(LPC8, 0x2c20),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
+	INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+
+	{ 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+	  { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+	    IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+	    IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+	    IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
+	    IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+	    IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+	    IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+	    IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
+
+	{ 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, DMAC8_11, 0, PECI0, LPC, FRT, 0, TMR45,
+	    TMR23, TMR01, 0, 0, 0, 0, 0, DMAC0_5,
+	    HUDI, 0, 0, SCIF3, SCIF2, SDHI, TMU345, TMU012
+	     } },
+
+	{ 0xffd400d0, 0xffd400d4, 32, /* INT2MSKR1 / INT2MSKCR1 */
+	  { IRQ15, IRQ14, IRQ13, IRQ12, IRQ11, IRQ10, SCIF4, ETHERC,
+	    IRQ9, IRQ8, SCIF1, SCIF0, USB0, 0, 0, USB1,
+	    ADC1, 0, DMAC6_7, ADC0, SPI0, SIM, PECI2, PECI1,
+	    ARC4, 0, SPI1, JMC, 0, 0, 0, DVC
+	     } },
+
+	{ 0xffd10038, 0xffd1003c, 32, /* INT2MSKR2 / INT2MSKCR2 */
+	  { IIC4_1, IIC4_2, IIC5_0, ONFICTL, 0, 0, SGPIO, 0,
+	    0, G200, 0, IIC9_2, IIC8_2, IIC8_1, IIC8_0, IIC7_3,
+	    IIC7_2, IIC7_1, IIC6_3, IIC0_0, IIC0_1, IIC0_2, IIC0_3, IIC3_1,
+	    IIC2_3, 0, IIC2_1, IIC9_1, IIC3_3, IIC1_0, 0, IIC2_2
+	     } },
+
+	{ 0xffd100d0, 0xffd100d4, 32, /* INT2MSKR3 / INT2MSKCR3 */
+	  { MMC1, IIC6_1, IIC6_0, IIC5_1, IIC3_2, IIC2_0, PECI5, MMC2,
+	    IIC1_3, IIC1_2, IIC9_0, IIC8_3, IIC4_3, IIC7_0, 0, IIC6_2,
+	    PCIC, 0, IIC4_0, 0, ECCU, RSPI, 0, IIC9_3,
+	    IIC3_0, 0, IIC5_3, IIC5_2, 0, 0, 0, IIC1_1
+	     } },
+
+	{ 0xffd20038, 0xffd2003c, 32, /* INT2MSKR4 / INT2MSKCR4 */
+	  { WDT0B, WDT1B, WDT3B, GETHER0, 0, 0, 0, 0,
+	    0, 0, 0, LPC7, SERMUX2, DMAE3, DMAE2, PBIC,
+	    PBIB, PBIA, GETHER1, DMINT12, DMINT13, DMINT14, DMINT15, TSIP,
+	    DMINT23, 0, DMINT21, LPC6, 0, DMINT16, 0, DMINT22
+	     } },
+
+	{ 0xffd200d0, 0xffd200d4, 32, /* INT2MSKR5 / INT2MSKCR5 */
+	  { 0, WDT8B, WDT7B, WDT4B, 0, DMINT20, 0, 0,
+	    DMINT19, DMINT18, LPC5, SERMUX3, WDT2B, GETHER2, 0, 0,
+	    0, 0, PCIE_BRIDGE, 0, 0, 0, 0, LPC8,
+	    DDRECC, 0, WDT6B, WDT5B, 0, 0, 0, DMINT17
+	     } },
+};
+
+#define INTPRI		0xffd00010
+#define INT2PRI0	0xffd40000
+#define INT2PRI1	0xffd40004
+#define INT2PRI2	0xffd40008
+#define INT2PRI3	0xffd4000c
+#define INT2PRI4	0xffd40010
+#define INT2PRI5	0xffd40014
+#define INT2PRI6	0xffd40018
+#define INT2PRI7	0xffd4001c
+#define INT2PRI8	0xffd400a0
+#define INT2PRI9	0xffd400a4
+#define INT2PRI10	0xffd400a8
+#define INT2PRI11	0xffd400ac
+#define INT2PRI12	0xffd400b0
+#define INT2PRI13	0xffd400b4
+#define INT2PRI14	0xffd400b8
+#define INT2PRI15	0xffd400bc
+#define INT2PRI16	0xffd10000
+#define INT2PRI17	0xffd10004
+#define INT2PRI18	0xffd10008
+#define INT2PRI19	0xffd1000c
+#define INT2PRI20	0xffd10010
+#define INT2PRI21	0xffd10014
+#define INT2PRI22	0xffd10018
+#define INT2PRI23	0xffd1001c
+#define INT2PRI24	0xffd100a0
+#define INT2PRI25	0xffd100a4
+#define INT2PRI26	0xffd100a8
+#define INT2PRI27	0xffd100ac
+#define INT2PRI28	0xffd100b0
+#define INT2PRI29	0xffd100b4
+#define INT2PRI30	0xffd100b8
+#define INT2PRI31	0xffd100bc
+#define INT2PRI32	0xffd20000
+#define INT2PRI33	0xffd20004
+#define INT2PRI34	0xffd20008
+#define INT2PRI35	0xffd2000c
+#define INT2PRI36	0xffd20010
+#define INT2PRI37	0xffd20014
+#define INT2PRI38	0xffd20018
+#define INT2PRI39	0xffd2001c
+#define INT2PRI40	0xffd200a0
+#define INT2PRI41	0xffd200a4
+#define INT2PRI42	0xffd200a8
+#define INT2PRI43	0xffd200ac
+#define INT2PRI44	0xffd200b0
+#define INT2PRI45	0xffd200b4
+#define INT2PRI46	0xffd200b8
+#define INT2PRI47	0xffd200bc
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ INTPRI, 0, 32, 4, { IRQ0, IRQ1, IRQ2, IRQ3,
+			      IRQ4, IRQ5, IRQ6, IRQ7 } },
+
+	{ INT2PRI0, 0, 32, 8, { TMU0, TMU1, TMU2, TMU2_TICPI } },
+	{ INT2PRI1, 0, 32, 8, { TMU3, TMU4, TMU5, SDHI } },
+	{ INT2PRI2, 0, 32, 8, { SCIF2, SCIF3, 0, IRQ8 } },
+	{ INT2PRI3, 0, 32, 8, { HUDI, DMAC0_5, ADC0, IRQ9 } },
+	{ INT2PRI4, 0, 32, 8, { IRQ10, 0, TMR01, TMR23 } },
+	{ INT2PRI5, 0, 32, 8, { TMR45, 0, FRT, LPC } },
+	{ INT2PRI6, 0, 32, 8, { PECI0, ETHERC, DMAC8_11, 0 } },
+	{ INT2PRI7, 0, 32, 8, { SCIF4, 0, IRQ11, IRQ12 } },
+	{ INT2PRI8, 0, 32, 8, { 0, 0, 0, DVC } },
+	{ INT2PRI9, 0, 32, 8, { ARC4, 0, SPI1, JMC } },
+	{ INT2PRI10, 0, 32, 8, { SPI0, SIM, PECI2, PECI1 } },
+	{ INT2PRI11, 0, 32, 8, { ADC1, IRQ13, DMAC6_7, IRQ14 } },
+	{ INT2PRI12, 0, 32, 8, { USB0, 0, IRQ15, USB1 } },
+	{ INT2PRI13, 0, 32, 8, { 0, 0, SCIF1, SCIF0 } },
+
+	{ INT2PRI16, 0, 32, 8, { IIC2_2, 0, 0, 0 } },
+	{ INT2PRI17, 0, 32, 8, { 0, 0, 0, IIC1_0 } },
+	{ INT2PRI18, 0, 32, 8, { IIC3_3, IIC9_1, IIC2_1, IIC1_2 } },
+	{ INT2PRI19, 0, 32, 8, { IIC2_3, IIC3_1, 0, IIC1_3 } },
+	{ INT2PRI20, 0, 32, 8, { IIC2_0, IIC6_3, IIC7_1, IIC7_2 } },
+	{ INT2PRI21, 0, 32, 8, { IIC7_3, IIC8_0, IIC8_1, IIC8_2 } },
+	{ INT2PRI22, 0, 32, 8, { IIC9_2, MMC2, G200, 0 } },
+	{ INT2PRI23, 0, 32, 8, { PECI5, SGPIO, IIC3_2, IIC5_1 } },
+	{ INT2PRI24, 0, 32, 8, { PECI4, PECI3, 0, IIC1_1 } },
+	{ INT2PRI25, 0, 32, 8, { IIC3_0, 0, IIC5_3, IIC5_2 } },
+	{ INT2PRI26, 0, 32, 8, { ECCU, RSPI, 0, IIC9_3 } },
+	{ INT2PRI27, 0, 32, 8, { PCIC, IIC6_0, IIC4_0, IIC6_1 } },
+	{ INT2PRI28, 0, 32, 8, { IIC4_3, IIC7_0, MMC1, IIC6_2 } },
+	{ INT2PRI29, 0, 32, 8, { 0, 0, IIC9_0, IIC8_3 } },
+	{ INT2PRI30, 0, 32, 8, { IIC4_1, IIC4_2, IIC5_0, ONFICTL } },
+	{ INT2PRI31, 0, 32, 8, { IIC0_0, IIC0_1, IIC0_2, IIC0_3 } },
+	{ INT2PRI32, 0, 32, 8, { DMINT22, 0, 0, 0 } },
+	{ INT2PRI33, 0, 32, 8, { 0, 0, 0, DMINT16 } },
+	{ INT2PRI34, 0, 32, 8, { 0, LPC6, DMINT21, DMINT18 } },
+	{ INT2PRI35, 0, 32, 8, { DMINT23, TSIP, 0, DMINT19 } },
+	{ INT2PRI36, 0, 32, 8, { DMINT20, GETHER1, PBIA, PBIB } },
+	{ INT2PRI37, 0, 32, 8, { PBIC, DMAE2, DMAE3, SERMUX2 } },
+	{ INT2PRI38, 0, 32, 8, { LPC7, 0, 0, 0 } },
+	{ INT2PRI39, 0, 32, 8, { 0, 0, 0, WDT4B } },
+	{ INT2PRI40, 0, 32, 8, { 0, 0, 0, DMINT17 } },
+	{ INT2PRI41, 0, 32, 8, { DDRECC, 0, WDT6B, WDT5B } },
+	{ INT2PRI42, 0, 32, 8, { 0, 0, 0, LPC8 } },
+	{ INT2PRI43, 0, 32, 8, { 0, WDT7B, PCIE_BRIDGE, WDT8B } },
+	{ INT2PRI44, 0, 32, 8, { WDT2B, GETHER2, 0, 0 } },
+	{ INT2PRI45, 0, 32, 8, { 0, 0, LPC5, SERMUX3 } },
+	{ INT2PRI46, 0, 32, 8, { WDT0B, WDT1B, WDT3B, GETHER0 } },
+	{ INT2PRI47, 0, 32, 8, { DMINT12, DMINT13, DMINT14, DMINT15 } },
+};
+
+static struct intc_sense_reg sense_registers_irq8to15[] __initdata = {
+	{ 0xffd100f8, 32, 2, /* ICR2 */   { IRQ15, IRQ14, IRQ13, IRQ12,
+					    IRQ11, IRQ10, IRQ9, IRQ8 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7757", vectors, groups,
+			 mask_registers, prio_registers,
+			 sense_registers_irq8to15);
+
+/* Support for external interrupt pins in IRQ mode */
+static struct intc_vect vectors_irq0123[] __initdata = {
+	INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240),
+	INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0),
+};
+
+static struct intc_vect vectors_irq4567[] __initdata = {
+	INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340),
+	INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0),
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xffd0001c, 32, 2, /* ICR1 */   { IRQ0, IRQ1, IRQ2, IRQ3,
+					    IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7757-irq0123",
+			     vectors_irq0123, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7757-irq4567",
+			     vectors_irq4567, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
+
+/* External interrupt pins in IRL mode */
+static struct intc_vect vectors_irl0123[] __initdata = {
+	INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
+	INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
+	INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
+	INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
+	INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
+	INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
+	INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
+	INTC_VECT(IRL0_HHHL, 0x3c0),
+};
+
+static struct intc_vect vectors_irl4567[] __initdata = {
+	INTC_VECT(IRL4_LLLL, 0x200), INTC_VECT(IRL4_LLLH, 0x220),
+	INTC_VECT(IRL4_LLHL, 0x240), INTC_VECT(IRL4_LLHH, 0x260),
+	INTC_VECT(IRL4_LHLL, 0x280), INTC_VECT(IRL4_LHLH, 0x2a0),
+	INTC_VECT(IRL4_LHHL, 0x2c0), INTC_VECT(IRL4_LHHH, 0x2e0),
+	INTC_VECT(IRL4_HLLL, 0x300), INTC_VECT(IRL4_HLLH, 0x320),
+	INTC_VECT(IRL4_HLHL, 0x340), INTC_VECT(IRL4_HLHH, 0x360),
+	INTC_VECT(IRL4_HHLL, 0x380), INTC_VECT(IRL4_HHLH, 0x3a0),
+	INTC_VECT(IRL4_HHHL, 0x3c0),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7757-irl0123", vectors_irl0123,
+			 NULL, mask_registers, NULL, NULL);
+
+static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7757-irl4567", vectors_irl4567,
+			 NULL, mask_registers, NULL, NULL);
+
+#define INTC_ICR0	0xffd00000
+#define INTC_INTMSK0	0xffd00044
+#define INTC_INTMSK1	0xffd00048
+#define INTC_INTMSK2	0xffd40080
+#define INTC_INTMSKCLR1	0xffd00068
+#define INTC_INTMSKCLR2	0xffd40084
+
+void __init plat_irq_setup(void)
+{
+	/* disable IRQ3-0 + IRQ7-4 */
+	__raw_writel(0xff000000, INTC_INTMSK0);
+
+	/* disable IRL3-0 + IRL7-4 */
+	__raw_writel(0xc0000000, INTC_INTMSK1);
+	__raw_writel(0xfffefffe, INTC_INTMSK2);
+
+	/* select IRL mode for IRL3-0 + IRL7-4 */
+	__raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+
+	/* disable holding function, ie enable "SH-4 Mode" */
+	__raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+
+	register_intc_controller(&intc_desc);
+}
+
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ7654:
+		/* select IRQ mode for IRL7-4 */
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
+		register_intc_controller(&intc_desc_irq4567);
+		break;
+	case IRQ_MODE_IRQ3210:
+		/* select IRQ mode for IRL3-0 */
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
+		register_intc_controller(&intc_desc_irq0123);
+		break;
+	case IRQ_MODE_IRL7654:
+		/* enable IRL7-4 but don't provide any masking */
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL3210:
+		/* enable IRL0-3 but don't provide any masking */
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL7654_MASK:
+		/* enable IRL7-4 and mask using cpu intc controller */
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_desc_irl4567);
+		break;
+	case IRQ_MODE_IRL3210_MASK:
+		/* enable IRL0-3 and mask using cpu intc controller */
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_desc_irl0123);
+		break;
+	default:
+		BUG();
+	}
+}
+
+void __init plat_mem_setup(void)
+{
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
new file mode 100644
index 0000000..40e6cda
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -0,0 +1,457 @@
+/*
+ * SH7763 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2007  Yoshihiro Shimoda
+ *  Copyright (C) 2008, 2009  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/usb/ohci_pdriver.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe00000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x700)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffe08000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xb80)),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffe10000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xf00)),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xffe80000,
+		.end	= 0xffe80000 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Shared Period/Carry/Alarm IRQ */
+		.start  = evt2irq(0x480),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+static struct resource usb_ohci_resources[] = {
+	[0] = {
+		.start	= 0xffec8000,
+		.end	= 0xffec80ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xc60),
+		.end	= evt2irq(0xc60),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 usb_ohci_dma_mask = 0xffffffffUL;
+
+static struct usb_ohci_pdata usb_ohci_pdata;
+
+static struct platform_device usb_ohci_device = {
+	.name		= "ohci-platform",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &usb_ohci_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb_ohci_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(usb_ohci_resources),
+	.resource	= usb_ohci_resources,
+};
+
+static struct resource usbf_resources[] = {
+	[0] = {
+		.start	= 0xffec0000,
+		.end	= 0xffec00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xc80),
+		.end	= evt2irq(0xc80),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usbf_device = {
+	.name		= "sh_udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(usbf_resources),
+	.resource	= usbf_resources,
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80000, 0x30),
+	DEFINE_RES_IRQ(evt2irq(0x580)),
+	DEFINE_RES_IRQ(evt2irq(0x5a0)),
+	DEFINE_RES_IRQ(evt2irq(0x5c0)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu1_resources[] = {
+	DEFINE_RES_MEM(0xffd88000, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0xe00)),
+	DEFINE_RES_IRQ(evt2irq(0xe20)),
+	DEFINE_RES_IRQ(evt2irq(0xe40)),
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh-tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct platform_device *sh7763_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&tmu0_device,
+	&tmu1_device,
+	&rtc_device,
+	&usb_ohci_device,
+	&usbf_device,
+};
+
+static int __init sh7763_devices_setup(void)
+{
+	return platform_add_devices(sh7763_devices,
+				    ARRAY_SIZE(sh7763_devices));
+}
+arch_initcall(sh7763_devices_setup);
+
+static struct platform_device *sh7763_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&tmu0_device,
+	&tmu1_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7763_early_devices,
+				   ARRAY_SIZE(sh7763_early_devices));
+}
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+
+	IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	IRL_HHLL, IRL_HHLH, IRL_HHHL,
+
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	RTC, WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
+	HUDI, LCDC, DMAC, SCIF0, IIC0, IIC1, CMT, GETHER, HAC,
+	PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
+	STIF0, STIF1, SCIF1, SIOF0, SIOF1, SIOF2,
+	USBH, USBF, TPU, PCC, MMCIF, SIM,
+	TMU3, TMU4, TMU5, ADC, SSI0, SSI1, SSI2, SSI3,
+	SCIF2, GPIO,
+
+	/* interrupt groups */
+
+	TMU012, TMU345,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+	INTC_VECT(RTC, 0x4c0),
+	INTC_VECT(WDT, 0x560), INTC_VECT(TMU0, 0x580),
+	INTC_VECT(TMU1, 0x5a0), INTC_VECT(TMU2, 0x5c0),
+	INTC_VECT(TMU2_TICPI, 0x5e0), INTC_VECT(HUDI, 0x600),
+	INTC_VECT(LCDC, 0x620),
+	INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
+	INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
+	INTC_VECT(DMAC, 0x6c0),
+	INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
+	INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
+	INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
+	INTC_VECT(IIC0, 0x8A0), INTC_VECT(IIC1, 0x8C0),
+	INTC_VECT(CMT, 0x900), INTC_VECT(GETHER, 0x920),
+	INTC_VECT(GETHER, 0x940), INTC_VECT(GETHER, 0x960),
+	INTC_VECT(HAC, 0x980),
+	INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
+	INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
+	INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
+	INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
+	INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
+	INTC_VECT(STIF0, 0xb40), INTC_VECT(STIF1, 0xb60),
+	INTC_VECT(SCIF1, 0xb80), INTC_VECT(SCIF1, 0xba0),
+	INTC_VECT(SCIF1, 0xbc0), INTC_VECT(SCIF1, 0xbe0),
+	INTC_VECT(SIOF0, 0xc00), INTC_VECT(SIOF1, 0xc20),
+	INTC_VECT(USBH, 0xc60), INTC_VECT(USBF, 0xc80),
+	INTC_VECT(USBF, 0xca0),
+	INTC_VECT(TPU, 0xcc0), INTC_VECT(PCC, 0xce0),
+	INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
+	INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
+	INTC_VECT(SIM, 0xd80), INTC_VECT(SIM, 0xda0),
+	INTC_VECT(SIM, 0xdc0), INTC_VECT(SIM, 0xde0),
+	INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
+	INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60),
+	INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
+	INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0),
+	INTC_VECT(SCIF2, 0xf00), INTC_VECT(SCIF2, 0xf20),
+	INTC_VECT(SCIF2, 0xf40), INTC_VECT(SCIF2, 0xf60),
+	INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
+	INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
+	INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
+	  { 0, 0, 0, 0, 0, 0, GPIO, 0,
+	    SSI0, MMCIF, 0, SIOF0, PCIC5, PCIINTD, PCIINTC, PCIINTB,
+	    PCIINTA, PCISERR, HAC, CMT, 0, 0, 0, DMAC,
+	    HUDI, 0, WDT, SCIF1, SCIF0, RTC, TMU345, TMU012 } },
+	{ 0xffd400d0, 0xffd400d4, 32, /* INT2MSKR1 / INT2MSKCR1 */
+	  { 0, 0, 0, 0, 0, 0, SCIF2, USBF,
+	    0, 0, STIF1, STIF0, 0, 0, USBH, GETHER,
+	    PCC, 0, 0, ADC, TPU, SIM, SIOF2, SIOF1,
+	    LCDC, 0, IIC1, IIC0, SSI3, SSI2, SSI1, 0 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1,
+						 TMU2, TMU2_TICPI } },
+	{ 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } },
+	{ 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } },
+	{ 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { HUDI, DMAC, ADC } },
+	{ 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { CMT, HAC,
+						 PCISERR, PCIINTA } },
+	{ 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC,
+						 PCIINTD, PCIC5 } },
+	{ 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { SIOF0, USBF, MMCIF, SSI0 } },
+	{ 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { SCIF2, GPIO } },
+	{ 0xffd400a0, 0, 32, 8, /* INT2PRI8 */ { SSI3, SSI2, SSI1, 0 } },
+	{ 0xffd400a4, 0, 32, 8, /* INT2PRI9 */ { LCDC, 0, IIC1, IIC0 } },
+	{ 0xffd400a8, 0, 32, 8, /* INT2PRI10 */ { TPU, SIM, SIOF2, SIOF1 } },
+	{ 0xffd400ac, 0, 32, 8, /* INT2PRI11 */ { PCC } },
+	{ 0xffd400b0, 0, 32, 8, /* INT2PRI12 */ { 0, 0, USBH, GETHER } },
+	{ 0xffd400b4, 0, 32, 8, /* INT2PRI13 */ { 0, 0, STIF1, STIF0 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7763", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+/* Support for external interrupt pins in IRQ mode */
+static struct intc_vect irq_vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
+	INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
+	INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
+	INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
+};
+
+static struct intc_mask_reg irq_mask_registers[] __initdata = {
+	{ 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg irq_prio_registers[] __initdata = {
+	{ 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
+					       IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg irq_sense_registers[] __initdata = {
+	{ 0xffd0001c, 32, 2, /* ICR1 */   { IRQ0, IRQ1, IRQ2, IRQ3,
+					    IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg irq_ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7763-irq", irq_vectors,
+			     NULL, irq_mask_registers, irq_prio_registers,
+			     irq_sense_registers, irq_ack_registers);
+
+
+/* External interrupt pins in IRL mode */
+static struct intc_vect irl_vectors[] __initdata = {
+	INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
+	INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
+	INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
+	INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
+	INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
+	INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
+	INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
+	INTC_VECT(IRL_HHHL, 0x3c0),
+};
+
+static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
+	{ 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+	  { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	    IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	    IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	    IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
+};
+
+static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
+	{ 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+	  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	    IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	    IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	    IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	    IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
+};
+
+static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors,
+			NULL, irl7654_mask_registers, NULL, NULL);
+
+static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors,
+			NULL, irl3210_mask_registers, NULL, NULL);
+
+#define INTC_ICR0	0xffd00000
+#define INTC_INTMSK0	0xffd00044
+#define INTC_INTMSK1	0xffd00048
+#define INTC_INTMSK2	0xffd40080
+#define INTC_INTMSKCLR1	0xffd00068
+#define INTC_INTMSKCLR2	0xffd40084
+
+void __init plat_irq_setup(void)
+{
+	/* disable IRQ7-0 */
+	__raw_writel(0xff000000, INTC_INTMSK0);
+
+	/* disable IRL3-0 + IRL7-4 */
+	__raw_writel(0xc0000000, INTC_INTMSK1);
+	__raw_writel(0xfffefffe, INTC_INTMSK2);
+
+	register_intc_controller(&intc_desc);
+}
+
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ:
+		/* select IRQ mode for IRL3-0 + IRL7-4 */
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
+		register_intc_controller(&intc_irq_desc);
+		break;
+	case IRQ_MODE_IRL7654:
+		/* enable IRL7-4 but don't provide any masking */
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL3210:
+		/* enable IRL0-3 but don't provide any masking */
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL7654_MASK:
+		/* enable IRL7-4 and mask using cpu intc controller */
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_irl7654_desc);
+		break;
+	case IRQ_MODE_IRL3210_MASK:
+		/* enable IRL0-3 and mask using cpu intc controller */
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_irl3210_desc);
+		break;
+	default:
+		BUG();
+	}
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
new file mode 100644
index 0000000..82e3bdf
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
@@ -0,0 +1,573 @@
+/*
+ * SH7770 Setup
+ *
+ *  Copyright (C) 2006 - 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <linux/io.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_TOIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xff923000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x9a0)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_TOIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xff924000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x9c0)),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_TOIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xff925000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x9e0)),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_TOIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xff926000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xa00)),
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_TOIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xff927000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xa20)),
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_TOIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xff928000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xa40)),
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct plat_sci_port scif6_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_TOIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif6_resources[] = {
+	DEFINE_RES_MEM(0xff929000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xa60)),
+};
+
+static struct platform_device scif6_device = {
+	.name		= "sh-sci",
+	.id		= 6,
+	.resource	= scif6_resources,
+	.num_resources	= ARRAY_SIZE(scif6_resources),
+	.dev		= {
+		.platform_data	= &scif6_platform_data,
+	},
+};
+
+static struct plat_sci_port scif7_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_TOIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif7_resources[] = {
+	DEFINE_RES_MEM(0xff92a000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xa80)),
+};
+
+static struct platform_device scif7_device = {
+	.name		= "sh-sci",
+	.id		= 7,
+	.resource	= scif7_resources,
+	.num_resources	= ARRAY_SIZE(scif7_resources),
+	.dev		= {
+		.platform_data	= &scif7_platform_data,
+	},
+};
+
+static struct plat_sci_port scif8_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_TOIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif8_resources[] = {
+	DEFINE_RES_MEM(0xff92b000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xaa0)),
+};
+
+static struct platform_device scif8_device = {
+	.name		= "sh-sci",
+	.id		= 8,
+	.resource	= scif8_resources,
+	.num_resources	= ARRAY_SIZE(scif8_resources),
+	.dev		= {
+		.platform_data	= &scif8_platform_data,
+	},
+};
+
+static struct plat_sci_port scif9_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_TOIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif9_resources[] = {
+	DEFINE_RES_MEM(0xff92c000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xac0)),
+};
+
+static struct platform_device scif9_device = {
+	.name		= "sh-sci",
+	.id		= 9,
+	.resource	= scif9_resources,
+	.num_resources	= ARRAY_SIZE(scif9_resources),
+	.dev		= {
+		.platform_data	= &scif9_platform_data,
+	},
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80000, 0x30),
+	DEFINE_RES_IRQ(evt2irq(0x400)),
+	DEFINE_RES_IRQ(evt2irq(0x420)),
+	DEFINE_RES_IRQ(evt2irq(0x440)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu1_resources[] = {
+	DEFINE_RES_MEM(0xffd81000, 0x30),
+	DEFINE_RES_IRQ(evt2irq(0x460)),
+	DEFINE_RES_IRQ(evt2irq(0x480)),
+	DEFINE_RES_IRQ(evt2irq(0x4a0)),
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh-tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu2_resources[] = {
+	DEFINE_RES_MEM(0xffd82000, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0x4c0)),
+	DEFINE_RES_IRQ(evt2irq(0x4e0)),
+	DEFINE_RES_IRQ(evt2irq(0x500)),
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh-tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
+static struct platform_device *sh7770_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&scif7_device,
+	&scif8_device,
+	&scif9_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+};
+
+static int __init sh7770_devices_setup(void)
+{
+	return platform_add_devices(sh7770_devices,
+				    ARRAY_SIZE(sh7770_devices));
+}
+arch_initcall(sh7770_devices_setup);
+
+static struct platform_device *sh7770_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&scif7_device,
+	&scif8_device,
+	&scif9_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7770_early_devices,
+				   ARRAY_SIZE(sh7770_early_devices));
+}
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	IRL_HHLL, IRL_HHLH, IRL_HHHL,
+
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
+
+	GPIO,
+	TMU0, TMU1, TMU2, TMU2_TICPI,
+	TMU3, TMU4, TMU5, TMU5_TICPI,
+	TMU6, TMU7, TMU8,
+	HAC, IPI, SPDIF, HUDI, I2C,
+	DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
+	I2S0, I2S1, I2S2, I2S3,
+	SRC_RX, SRC_TX, SRC_SPDIF,
+	DU, VIDEO_IN, REMOTE, YUV, USB, ATAPI, CAN, GPS, GFX2D,
+	GFX3D_MBX, GFX3D_DMAC,
+	EXBUS_ATA,
+	SPI0, SPI1,
+	SCIF089, SCIF1234, SCIF567,
+	ADC,
+	BBDMAC_0_3, BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14,
+	BBDMAC_15_18, BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27,
+	BBDMAC_28, BBDMAC_29, BBDMAC_30, BBDMAC_31,
+
+	/* interrupt groups */
+	TMU, DMAC, I2S, SRC, GFX3D, SPI, SCIF, BBDMAC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(GPIO, 0x3e0),
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
+	INTC_VECT(TMU3, 0x480), INTC_VECT(TMU4, 0x4a0),
+	INTC_VECT(TMU5, 0x4c0), INTC_VECT(TMU5_TICPI, 0x4e0),
+	INTC_VECT(TMU6, 0x500), INTC_VECT(TMU7, 0x520),
+	INTC_VECT(TMU8, 0x540),
+	INTC_VECT(HAC, 0x580), INTC_VECT(IPI, 0x5c0),
+	INTC_VECT(SPDIF, 0x5e0),
+	INTC_VECT(HUDI, 0x600), INTC_VECT(I2C, 0x620),
+	INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660),
+	INTC_VECT(DMAC0_DMINT2, 0x680),
+	INTC_VECT(I2S0, 0x6a0), INTC_VECT(I2S1, 0x6c0),
+	INTC_VECT(I2S2, 0x6e0), INTC_VECT(I2S3, 0x700),
+	INTC_VECT(SRC_RX, 0x720), INTC_VECT(SRC_TX, 0x740),
+	INTC_VECT(SRC_SPDIF, 0x760),
+	INTC_VECT(DU, 0x780), INTC_VECT(VIDEO_IN, 0x7a0),
+	INTC_VECT(REMOTE, 0x7c0), INTC_VECT(YUV, 0x7e0),
+	INTC_VECT(USB, 0x840), INTC_VECT(ATAPI, 0x860),
+	INTC_VECT(CAN, 0x880), INTC_VECT(GPS, 0x8a0),
+	INTC_VECT(GFX2D, 0x8c0),
+	INTC_VECT(GFX3D_MBX, 0x900), INTC_VECT(GFX3D_DMAC, 0x920),
+	INTC_VECT(EXBUS_ATA, 0x940),
+	INTC_VECT(SPI0, 0x960), INTC_VECT(SPI1, 0x980),
+	INTC_VECT(SCIF089, 0x9a0), INTC_VECT(SCIF1234, 0x9c0),
+	INTC_VECT(SCIF1234, 0x9e0), INTC_VECT(SCIF1234, 0xa00),
+	INTC_VECT(SCIF1234, 0xa20), INTC_VECT(SCIF567, 0xa40),
+	INTC_VECT(SCIF567, 0xa60), INTC_VECT(SCIF567, 0xa80),
+	INTC_VECT(SCIF089, 0xaa0), INTC_VECT(SCIF089, 0xac0),
+	INTC_VECT(ADC, 0xb20),
+	INTC_VECT(BBDMAC_0_3, 0xba0), INTC_VECT(BBDMAC_0_3, 0xbc0),
+	INTC_VECT(BBDMAC_0_3, 0xbe0), INTC_VECT(BBDMAC_0_3, 0xc00),
+	INTC_VECT(BBDMAC_4_7, 0xc20), INTC_VECT(BBDMAC_4_7, 0xc40),
+	INTC_VECT(BBDMAC_4_7, 0xc60), INTC_VECT(BBDMAC_4_7, 0xc80),
+	INTC_VECT(BBDMAC_8_10, 0xca0), INTC_VECT(BBDMAC_8_10, 0xcc0),
+	INTC_VECT(BBDMAC_8_10, 0xce0), INTC_VECT(BBDMAC_11_14, 0xd00),
+	INTC_VECT(BBDMAC_11_14, 0xd20), INTC_VECT(BBDMAC_11_14, 0xd40),
+	INTC_VECT(BBDMAC_11_14, 0xd60), INTC_VECT(BBDMAC_15_18, 0xd80),
+	INTC_VECT(BBDMAC_15_18, 0xda0), INTC_VECT(BBDMAC_15_18, 0xdc0),
+	INTC_VECT(BBDMAC_15_18, 0xde0), INTC_VECT(BBDMAC_19_22, 0xe00),
+	INTC_VECT(BBDMAC_19_22, 0xe20), INTC_VECT(BBDMAC_19_22, 0xe40),
+	INTC_VECT(BBDMAC_19_22, 0xe60), INTC_VECT(BBDMAC_23_26, 0xe80),
+	INTC_VECT(BBDMAC_23_26, 0xea0), INTC_VECT(BBDMAC_23_26, 0xec0),
+	INTC_VECT(BBDMAC_23_26, 0xee0), INTC_VECT(BBDMAC_27, 0xf00),
+	INTC_VECT(BBDMAC_28, 0xf20), INTC_VECT(BBDMAC_29, 0xf40),
+	INTC_VECT(BBDMAC_30, 0xf60), INTC_VECT(BBDMAC_31, 0xf80),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(TMU, TMU0, TMU1, TMU2, TMU2_TICPI, TMU3, TMU4, TMU5,
+		   TMU5_TICPI, TMU6, TMU7, TMU8),
+	INTC_GROUP(DMAC, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2),
+	INTC_GROUP(I2S, I2S0, I2S1, I2S2, I2S3),
+	INTC_GROUP(SRC, SRC_RX, SRC_TX, SRC_SPDIF),
+	INTC_GROUP(GFX3D, GFX3D_MBX, GFX3D_DMAC),
+	INTC_GROUP(SPI, SPI0, SPI1),
+	INTC_GROUP(SCIF, SCIF089, SCIF1234, SCIF567),
+	INTC_GROUP(BBDMAC,
+		   BBDMAC_0_3, BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14,
+		   BBDMAC_15_18, BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27,
+		   BBDMAC_28, BBDMAC_29, BBDMAC_30, BBDMAC_31),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xffe00040, 0xffe00044, 32, /* INT2MSKR / INT2MSKCR */
+	  { 0, BBDMAC, ADC, SCIF, SPI, EXBUS_ATA, GFX3D, GFX2D,
+	    GPS, CAN, ATAPI, USB, YUV, REMOTE, VIDEO_IN, DU, SRC, I2S,
+	    DMAC, I2C, HUDI, SPDIF, IPI, HAC, TMU, GPIO } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xffe00000, 0, 32, 8, /* INT2PRI0 */ { GPIO, TMU0, 0, HAC } },
+	{ 0xffe00004, 0, 32, 8, /* INT2PRI1 */ { IPI, SPDIF, HUDI, I2C } },
+	{ 0xffe00008, 0, 32, 8, /* INT2PRI2 */ { DMAC, I2S, SRC, DU } },
+	{ 0xffe0000c, 0, 32, 8, /* INT2PRI3 */ { VIDEO_IN, REMOTE, YUV, USB } },
+	{ 0xffe00010, 0, 32, 8, /* INT2PRI4 */ { ATAPI, CAN, GPS, GFX2D } },
+	{ 0xffe00014, 0, 32, 8, /* INT2PRI5 */ { 0, GFX3D, EXBUS_ATA, SPI } },
+	{ 0xffe00018, 0, 32, 8, /* INT2PRI6 */ { SCIF1234, SCIF567, SCIF089 } },
+	{ 0xffe0001c, 0, 32, 8, /* INT2PRI7 */ { ADC, 0, 0, BBDMAC_0_3 } },
+	{ 0xffe00020, 0, 32, 8, /* INT2PRI8 */
+	  { BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14, BBDMAC_15_18 } },
+	{ 0xffe00024, 0, 32, 8, /* INT2PRI9 */
+	  { BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27, BBDMAC_28 } },
+	{ 0xffe00028, 0, 32, 8, /* INT2PRI10 */
+	  { BBDMAC_29, BBDMAC_30, BBDMAC_31 } },
+	{ 0xffe0002c, 0, 32, 8, /* INT2PRI11 */
+	  { TMU1, TMU2, TMU2_TICPI, TMU3 } },
+	{ 0xffe00030, 0, 32, 8, /* INT2PRI12 */
+	  { TMU4, TMU5, TMU5_TICPI, TMU6 } },
+	{ 0xffe00034, 0, 32, 8, /* INT2PRI13 */
+	  { TMU7, TMU8 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7770", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+/* Support for external interrupt pins in IRQ mode */
+static struct intc_vect irq_vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
+	INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
+	INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
+};
+
+static struct intc_mask_reg irq_mask_registers[] __initdata = {
+	{ 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, } },
+};
+
+static struct intc_prio_reg irq_prio_registers[] __initdata = {
+	{ 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
+					       IRQ4, IRQ5, } },
+};
+
+static struct intc_sense_reg irq_sense_registers[] __initdata = {
+	{ 0xffd0001c, 32, 2, /* ICR1 */   { IRQ0, IRQ1, IRQ2, IRQ3,
+					    IRQ4, IRQ5, } },
+};
+
+static DECLARE_INTC_DESC(intc_irq_desc, "sh7770-irq", irq_vectors,
+			 NULL, irq_mask_registers, irq_prio_registers,
+			 irq_sense_registers);
+
+/* External interrupt pins in IRL mode */
+static struct intc_vect irl_vectors[] __initdata = {
+	INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
+	INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
+	INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
+	INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
+	INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
+	INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
+	INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
+	INTC_VECT(IRL_HHHL, 0x3c0),
+};
+
+static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
+	{ 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+	  { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	    IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	    IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	    IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
+};
+
+static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
+	{ 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+	  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	    IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	    IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	    IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	    IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
+};
+
+static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7780-irl7654", irl_vectors,
+			 NULL, irl7654_mask_registers, NULL, NULL);
+
+static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors,
+			 NULL, irl3210_mask_registers, NULL, NULL);
+
+#define INTC_ICR0	0xffd00000
+#define INTC_INTMSK0	0xffd00044
+#define INTC_INTMSK1	0xffd00048
+#define INTC_INTMSK2	0xffd40080
+#define INTC_INTMSKCLR1	0xffd00068
+#define INTC_INTMSKCLR2	0xffd40084
+
+void __init plat_irq_setup(void)
+{
+	/* disable IRQ7-0 */
+	__raw_writel(0xff000000, INTC_INTMSK0);
+
+	/* disable IRL3-0 + IRL7-4 */
+	__raw_writel(0xc0000000, INTC_INTMSK1);
+	__raw_writel(0xfffefffe, INTC_INTMSK2);
+
+	/* select IRL mode for IRL3-0 + IRL7-4 */
+	__raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+
+	/* disable holding function, ie enable "SH-4 Mode" */
+	__raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+
+	register_intc_controller(&intc_desc);
+}
+
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ:
+		/* select IRQ mode for IRL3-0 + IRL7-4 */
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
+		register_intc_controller(&intc_irq_desc);
+		break;
+	case IRQ_MODE_IRL7654:
+		/* enable IRL7-4 but don't provide any masking */
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL3210:
+		/* enable IRL0-3 but don't provide any masking */
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL7654_MASK:
+		/* enable IRL7-4 and mask using cpu intc controller */
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_irl7654_desc);
+		break;
+	case IRQ_MODE_IRL3210_MASK:
+		/* enable IRL0-3 and mask using cpu intc controller */
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_irl3210_desc);
+		break;
+	default:
+		BUG();
+	}
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
new file mode 100644
index 0000000..d90ff67
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -0,0 +1,507 @@
+/*
+ * SH7780 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <cpu/dma-register.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_CKE1,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe00000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x700)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_CKE1,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffe10000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xb80)),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80000, 0x30),
+	DEFINE_RES_IRQ(evt2irq(0x580)),
+	DEFINE_RES_IRQ(evt2irq(0x5a0)),
+	DEFINE_RES_IRQ(evt2irq(0x5c0)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu1_resources[] = {
+	DEFINE_RES_MEM(0xffdc0000, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0xe00)),
+	DEFINE_RES_IRQ(evt2irq(0xe20)),
+	DEFINE_RES_IRQ(evt2irq(0xe40)),
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh-tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xffe80000,
+		.end	= 0xffe80000 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Shared Period/Carry/Alarm IRQ */
+		.start	= evt2irq(0x480),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+/* DMA */
+static const struct sh_dmae_channel sh7780_dmae0_channels[] = {
+	{
+		.offset = 0,
+		.dmars = 0,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x10,
+		.dmars = 0,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x20,
+		.dmars = 4,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x30,
+		.dmars = 4,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x50,
+		.dmars = 8,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x60,
+		.dmars = 8,
+		.dmars_bit = 8,
+	}
+};
+
+static const struct sh_dmae_channel sh7780_dmae1_channels[] = {
+	{
+		.offset = 0,
+	}, {
+		.offset = 0x10,
+	}, {
+		.offset = 0x20,
+	}, {
+		.offset = 0x30,
+	}, {
+		.offset = 0x50,
+	}, {
+		.offset = 0x60,
+	}
+};
+
+static const unsigned int ts_shift[] = TS_SHIFT;
+
+static struct sh_dmae_pdata dma0_platform_data = {
+	.channel	= sh7780_dmae0_channels,
+	.channel_num	= ARRAY_SIZE(sh7780_dmae0_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+static struct sh_dmae_pdata dma1_platform_data = {
+	.channel	= sh7780_dmae1_channels,
+	.channel_num	= ARRAY_SIZE(sh7780_dmae1_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+static struct resource sh7780_dmae0_resources[] = {
+	[0] = {
+		/* Channel registers and DMAOR */
+		.start	= 0xfc808020,
+		.end	= 0xfc80808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* DMARSx */
+		.start	= 0xfc809000,
+		.end	= 0xfc80900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/*
+		 * Real DMA error vector is 0x6c0, and channel
+		 * vectors are 0x640-0x6a0, 0x780-0x7a0
+		 */
+		.name	= "error_irq",
+		.start	= evt2irq(0x640),
+		.end	= evt2irq(0x640),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+};
+
+static struct resource sh7780_dmae1_resources[] = {
+	[0] = {
+		/* Channel registers and DMAOR */
+		.start	= 0xfc818020,
+		.end	= 0xfc81808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* DMAC1 has no DMARS */
+	{
+		/*
+		 * Real DMA error vector is 0x6c0, and channel
+		 * vectors are 0x7c0-0x7e0, 0xd80-0xde0
+		 */
+		.name	= "error_irq",
+		.start	= evt2irq(0x7c0),
+		.end	= evt2irq(0x7c0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+};
+
+static struct platform_device dma0_device = {
+	.name           = "sh-dma-engine",
+	.id             = 0,
+	.resource	= sh7780_dmae0_resources,
+	.num_resources	= ARRAY_SIZE(sh7780_dmae0_resources),
+	.dev            = {
+		.platform_data	= &dma0_platform_data,
+	},
+};
+
+static struct platform_device dma1_device = {
+	.name		= "sh-dma-engine",
+	.id		= 1,
+	.resource	= sh7780_dmae1_resources,
+	.num_resources	= ARRAY_SIZE(sh7780_dmae1_resources),
+	.dev		= {
+		.platform_data	= &dma1_platform_data,
+	},
+};
+
+static struct platform_device *sh7780_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&tmu0_device,
+	&tmu1_device,
+	&rtc_device,
+	&dma0_device,
+	&dma1_device,
+};
+
+static int __init sh7780_devices_setup(void)
+{
+	return platform_add_devices(sh7780_devices,
+				    ARRAY_SIZE(sh7780_devices));
+}
+arch_initcall(sh7780_devices_setup);
+
+static struct platform_device *sh7780_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&tmu0_device,
+	&tmu1_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	if (mach_is_sh2007()) {
+		scif0_platform_data.scscr &= ~SCSCR_CKE1;
+		scif1_platform_data.scscr &= ~SCSCR_CKE1;
+	}
+
+	early_platform_add_devices(sh7780_early_devices,
+				   ARRAY_SIZE(sh7780_early_devices));
+}
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+
+	IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	IRL_HHLL, IRL_HHLH, IRL_HHHL,
+
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	RTC, WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
+	HUDI, DMAC0, SCIF0, DMAC1, CMT, HAC,
+	PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
+	SCIF1, SIOF, HSPI, MMCIF, TMU3, TMU4, TMU5, SSI, FLCTL,	GPIO,
+
+	/* interrupt groups */
+
+	TMU012,	TMU345,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+	INTC_VECT(RTC, 0x4c0),
+	INTC_VECT(WDT, 0x560),
+	INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
+	INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
+	INTC_VECT(HUDI, 0x600),
+	INTC_VECT(DMAC0, 0x640), INTC_VECT(DMAC0, 0x660),
+	INTC_VECT(DMAC0, 0x680), INTC_VECT(DMAC0, 0x6a0),
+	INTC_VECT(DMAC0, 0x6c0),
+	INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
+	INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
+	INTC_VECT(DMAC0, 0x780), INTC_VECT(DMAC0, 0x7a0),
+	INTC_VECT(DMAC1, 0x7c0), INTC_VECT(DMAC1, 0x7e0),
+	INTC_VECT(CMT, 0x900), INTC_VECT(HAC, 0x980),
+	INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
+	INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
+	INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
+	INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
+	INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
+	INTC_VECT(SCIF1, 0xb80), INTC_VECT(SCIF1, 0xba0),
+	INTC_VECT(SCIF1, 0xbc0), INTC_VECT(SCIF1, 0xbe0),
+	INTC_VECT(SIOF, 0xc00), INTC_VECT(HSPI, 0xc80),
+	INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
+	INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
+	INTC_VECT(DMAC1, 0xd80), INTC_VECT(DMAC1, 0xda0),
+	INTC_VECT(DMAC1, 0xdc0), INTC_VECT(DMAC1, 0xde0),
+	INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
+	INTC_VECT(TMU5, 0xe40),
+	INTC_VECT(SSI, 0xe80),
+	INTC_VECT(FLCTL, 0xf00), INTC_VECT(FLCTL, 0xf20),
+	INTC_VECT(FLCTL, 0xf40), INTC_VECT(FLCTL, 0xf60),
+	INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
+	INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
+	INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
+	  { 0, 0, 0, 0, 0, 0, GPIO, FLCTL,
+	    SSI, MMCIF, HSPI, SIOF, PCIC5, PCIINTD, PCIINTC, PCIINTB,
+	    PCIINTA, PCISERR, HAC, CMT, 0, 0, DMAC1, DMAC0,
+	    HUDI, 0, WDT, SCIF1, SCIF0, RTC, TMU345, TMU012 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1,
+						 TMU2, TMU2_TICPI } },
+	{ 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } },
+	{ 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } },
+	{ 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { HUDI, DMAC0, DMAC1 } },
+	{ 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { CMT, HAC,
+						 PCISERR, PCIINTA, } },
+	{ 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC,
+						 PCIINTD, PCIC5 } },
+	{ 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { SIOF, HSPI, MMCIF, SSI } },
+	{ 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { FLCTL, GPIO } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7780", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+/* Support for external interrupt pins in IRQ mode */
+
+static struct intc_vect irq_vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
+	INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
+	INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
+	INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
+};
+
+static struct intc_mask_reg irq_mask_registers[] __initdata = {
+	{ 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg irq_prio_registers[] __initdata = {
+	{ 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
+					       IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg irq_sense_registers[] __initdata = {
+	{ 0xffd0001c, 32, 2, /* ICR1 */   { IRQ0, IRQ1, IRQ2, IRQ3,
+					    IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg irq_ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7780-irq", irq_vectors,
+			     NULL, irq_mask_registers, irq_prio_registers,
+			     irq_sense_registers, irq_ack_registers);
+
+/* External interrupt pins in IRL mode */
+
+static struct intc_vect irl_vectors[] __initdata = {
+	INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
+	INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
+	INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
+	INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
+	INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
+	INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
+	INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
+	INTC_VECT(IRL_HHHL, 0x3c0),
+};
+
+static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
+	{ 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+	  { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	    IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	    IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	    IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
+};
+
+static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
+	{ 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+	  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	    IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	    IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	    IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	    IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
+};
+
+static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7780-irl7654", irl_vectors,
+			 NULL, irl7654_mask_registers, NULL, NULL);
+
+static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors,
+			 NULL, irl3210_mask_registers, NULL, NULL);
+
+#define INTC_ICR0	0xffd00000
+#define INTC_INTMSK0	0xffd00044
+#define INTC_INTMSK1	0xffd00048
+#define INTC_INTMSK2	0xffd40080
+#define INTC_INTMSKCLR1	0xffd00068
+#define INTC_INTMSKCLR2	0xffd40084
+
+void __init plat_irq_setup(void)
+{
+	/* disable IRQ7-0 */
+	__raw_writel(0xff000000, INTC_INTMSK0);
+
+	/* disable IRL3-0 + IRL7-4 */
+	__raw_writel(0xc0000000, INTC_INTMSK1);
+	__raw_writel(0xfffefffe, INTC_INTMSK2);
+
+	/* select IRL mode for IRL3-0 + IRL7-4 */
+	__raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+
+	/* disable holding function, ie enable "SH-4 Mode" */
+	__raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+
+	register_intc_controller(&intc_desc);
+}
+
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ:
+		/* select IRQ mode for IRL3-0 + IRL7-4 */
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
+		register_intc_controller(&intc_irq_desc);
+		break;
+	case IRQ_MODE_IRL7654:
+		/* enable IRL7-4 but don't provide any masking */
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL3210:
+		/* enable IRL0-3 but don't provide any masking */
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL7654_MASK:
+		/* enable IRL7-4 and mask using cpu intc controller */
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_irl7654_desc);
+		break;
+	case IRQ_MODE_IRL3210_MASK:
+		/* enable IRL0-3 and mask using cpu intc controller */
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_irl3210_desc);
+		break;
+	default:
+		BUG();
+	}
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
new file mode 100644
index 0000000..b0d6f82
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -0,0 +1,610 @@
+/*
+ * SH7785 Setup
+ *
+ *  Copyright (C) 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/sh_dma.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <asm/mmzone.h>
+#include <cpu/dma-register.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_CKE1,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffea0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x700)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_CKE1,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffeb0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x780)),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_CKE1,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffec0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x980)),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_CKE1,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xffed0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x9a0)),
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_CKE1,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xffee0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x9c0)),
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_CKE1,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xffef0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x9e0)),
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80000, 0x30),
+	DEFINE_RES_IRQ(evt2irq(0x580)),
+	DEFINE_RES_IRQ(evt2irq(0x5a0)),
+	DEFINE_RES_IRQ(evt2irq(0x5c0)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu1_resources[] = {
+	DEFINE_RES_MEM(0xffdc0000, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0xe00)),
+	DEFINE_RES_IRQ(evt2irq(0xe20)),
+	DEFINE_RES_IRQ(evt2irq(0xe40)),
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh-tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+/* DMA */
+static const struct sh_dmae_channel sh7785_dmae0_channels[] = {
+	{
+		.offset = 0,
+		.dmars = 0,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x10,
+		.dmars = 0,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x20,
+		.dmars = 4,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x30,
+		.dmars = 4,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x50,
+		.dmars = 8,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x60,
+		.dmars = 8,
+		.dmars_bit = 8,
+	}
+};
+
+static const struct sh_dmae_channel sh7785_dmae1_channels[] = {
+	{
+		.offset = 0,
+	}, {
+		.offset = 0x10,
+	}, {
+		.offset = 0x20,
+	}, {
+		.offset = 0x30,
+	}, {
+		.offset = 0x50,
+	}, {
+		.offset = 0x60,
+	}
+};
+
+static const unsigned int ts_shift[] = TS_SHIFT;
+
+static struct sh_dmae_pdata dma0_platform_data = {
+	.channel	= sh7785_dmae0_channels,
+	.channel_num	= ARRAY_SIZE(sh7785_dmae0_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+static struct sh_dmae_pdata dma1_platform_data = {
+	.channel	= sh7785_dmae1_channels,
+	.channel_num	= ARRAY_SIZE(sh7785_dmae1_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+static struct resource sh7785_dmae0_resources[] = {
+	[0] = {
+		/* Channel registers and DMAOR */
+		.start	= 0xfc808020,
+		.end	= 0xfc80808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* DMARSx */
+		.start	= 0xfc809000,
+		.end	= 0xfc80900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/*
+		 * Real DMA error vector is 0x6e0, and channel
+		 * vectors are 0x620-0x6c0
+		 */
+		.name	= "error_irq",
+		.start	= evt2irq(0x620),
+		.end	= evt2irq(0x620),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+};
+
+static struct resource sh7785_dmae1_resources[] = {
+	[0] = {
+		/* Channel registers and DMAOR */
+		.start	= 0xfcc08020,
+		.end	= 0xfcc0808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* DMAC1 has no DMARS */
+	{
+		/*
+		 * Real DMA error vector is 0x940, and channel
+		 * vectors are 0x880-0x920
+		 */
+		.name	= "error_irq",
+		.start	= evt2irq(0x880),
+		.end	= evt2irq(0x880),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+};
+
+static struct platform_device dma0_device = {
+	.name           = "sh-dma-engine",
+	.id             = 0,
+	.resource	= sh7785_dmae0_resources,
+	.num_resources	= ARRAY_SIZE(sh7785_dmae0_resources),
+	.dev            = {
+		.platform_data	= &dma0_platform_data,
+	},
+};
+
+static struct platform_device dma1_device = {
+	.name		= "sh-dma-engine",
+	.id		= 1,
+	.resource	= sh7785_dmae1_resources,
+	.num_resources	= ARRAY_SIZE(sh7785_dmae1_resources),
+	.dev		= {
+		.platform_data	= &dma1_platform_data,
+	},
+};
+
+static struct platform_device *sh7785_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&tmu0_device,
+	&tmu1_device,
+	&dma0_device,
+	&dma1_device,
+};
+
+static int __init sh7785_devices_setup(void)
+{
+	return platform_add_devices(sh7785_devices,
+				    ARRAY_SIZE(sh7785_devices));
+}
+arch_initcall(sh7785_devices_setup);
+
+static struct platform_device *sh7785_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&tmu0_device,
+	&tmu1_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7785_early_devices,
+				   ARRAY_SIZE(sh7785_early_devices));
+}
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+
+	IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+	IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+	IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+	IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
+
+	IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+	IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+	IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+	IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
+
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
+	HUDI, DMAC0, SCIF0, SCIF1, DMAC1, HSPI,
+	SCIF2, SCIF3, SCIF4, SCIF5,
+	PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
+	SIOF, MMCIF, DU, GDTA,
+	TMU3, TMU4, TMU5,
+	SSI0, SSI1,
+	HAC0, HAC1,
+	FLCTL, GPIO,
+
+	/* interrupt groups */
+
+	TMU012,	TMU345
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(WDT, 0x560),
+	INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
+	INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
+	INTC_VECT(HUDI, 0x600),
+	INTC_VECT(DMAC0, 0x620), INTC_VECT(DMAC0, 0x640),
+	INTC_VECT(DMAC0, 0x660), INTC_VECT(DMAC0, 0x680),
+	INTC_VECT(DMAC0, 0x6a0), INTC_VECT(DMAC0, 0x6c0),
+	INTC_VECT(DMAC0, 0x6e0),
+	INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
+	INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
+	INTC_VECT(SCIF1, 0x780), INTC_VECT(SCIF1, 0x7a0),
+	INTC_VECT(SCIF1, 0x7c0), INTC_VECT(SCIF1, 0x7e0),
+	INTC_VECT(DMAC1, 0x880), INTC_VECT(DMAC1, 0x8a0),
+	INTC_VECT(DMAC1, 0x8c0), INTC_VECT(DMAC1, 0x8e0),
+	INTC_VECT(DMAC1, 0x900), INTC_VECT(DMAC1, 0x920),
+	INTC_VECT(DMAC1, 0x940),
+	INTC_VECT(HSPI, 0x960),
+	INTC_VECT(SCIF2, 0x980), INTC_VECT(SCIF3, 0x9a0),
+	INTC_VECT(SCIF4, 0x9c0), INTC_VECT(SCIF5, 0x9e0),
+	INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
+	INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
+	INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
+	INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
+	INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
+	INTC_VECT(SIOF, 0xc00),
+	INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
+	INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
+	INTC_VECT(DU, 0xd80),
+	INTC_VECT(GDTA, 0xda0), INTC_VECT(GDTA, 0xdc0),
+	INTC_VECT(GDTA, 0xde0),
+	INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
+	INTC_VECT(TMU5, 0xe40),
+	INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
+	INTC_VECT(HAC0, 0xec0), INTC_VECT(HAC1, 0xee0),
+	INTC_VECT(FLCTL, 0xf00), INTC_VECT(FLCTL, 0xf20),
+	INTC_VECT(FLCTL, 0xf40), INTC_VECT(FLCTL, 0xf60),
+	INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
+	INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
+	INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+
+	{ 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+	  { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+	    IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+	    IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+	    IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
+	    IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+	    IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+	    IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+	    IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
+
+	{ 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
+	  { 0, 0, 0, GDTA, DU, SSI0, SSI1, GPIO,
+	    FLCTL, MMCIF, HSPI, SIOF, PCIC5, PCIINTD, PCIINTC, PCIINTB,
+	    PCIINTA, PCISERR, HAC1, HAC0, DMAC1, DMAC0, HUDI, WDT,
+	    SCIF5, SCIF4, SCIF3, SCIF2, SCIF1, SCIF0, TMU345, TMU012 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xffd00010, 0, 32, 4, /* INTPRI */   { IRQ0, IRQ1, IRQ2, IRQ3,
+						 IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1,
+						 TMU2, TMU2_TICPI } },
+	{ 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, } },
+	{ 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1,
+						 SCIF2, SCIF3 } },
+	{ 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { SCIF4, SCIF5, WDT, } },
+	{ 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { HUDI, DMAC0, DMAC1, } },
+	{ 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { HAC0, HAC1,
+						 PCISERR, PCIINTA } },
+	{ 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { PCIINTB, PCIINTC,
+						 PCIINTD, PCIC5 } },
+	{ 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { SIOF, HSPI, MMCIF, } },
+	{ 0xffd40020, 0, 32, 8, /* INT2PRI8 */ { FLCTL, GPIO, SSI0, SSI1, } },
+	{ 0xffd40024, 0, 32, 8, /* INT2PRI9 */ { DU, GDTA, } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7785", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+/* Support for external interrupt pins in IRQ mode */
+
+static struct intc_vect vectors_irq0123[] __initdata = {
+	INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
+	INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
+};
+
+static struct intc_vect vectors_irq4567[] __initdata = {
+	INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
+	INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xffd0001c, 32, 2, /* ICR1 */   { IRQ0, IRQ1, IRQ2, IRQ3,
+					    IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7785-irq0123",
+			     vectors_irq0123, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7785-irq4567",
+			     vectors_irq4567, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
+
+/* External interrupt pins in IRL mode */
+
+static struct intc_vect vectors_irl0123[] __initdata = {
+	INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
+	INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
+	INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
+	INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
+	INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
+	INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
+	INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
+	INTC_VECT(IRL0_HHHL, 0x3c0),
+};
+
+static struct intc_vect vectors_irl4567[] __initdata = {
+	INTC_VECT(IRL4_LLLL, 0xb00), INTC_VECT(IRL4_LLLH, 0xb20),
+	INTC_VECT(IRL4_LLHL, 0xb40), INTC_VECT(IRL4_LLHH, 0xb60),
+	INTC_VECT(IRL4_LHLL, 0xb80), INTC_VECT(IRL4_LHLH, 0xba0),
+	INTC_VECT(IRL4_LHHL, 0xbc0), INTC_VECT(IRL4_LHHH, 0xbe0),
+	INTC_VECT(IRL4_HLLL, 0xc00), INTC_VECT(IRL4_HLLH, 0xc20),
+	INTC_VECT(IRL4_HLHL, 0xc40), INTC_VECT(IRL4_HLHH, 0xc60),
+	INTC_VECT(IRL4_HHLL, 0xc80), INTC_VECT(IRL4_HHLH, 0xca0),
+	INTC_VECT(IRL4_HHHL, 0xcc0),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7785-irl0123", vectors_irl0123,
+			 NULL, mask_registers, NULL, NULL);
+
+static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7785-irl4567", vectors_irl4567,
+			 NULL, mask_registers, NULL, NULL);
+
+#define INTC_ICR0	0xffd00000
+#define INTC_INTMSK0	0xffd00044
+#define INTC_INTMSK1	0xffd00048
+#define INTC_INTMSK2	0xffd40080
+#define INTC_INTMSKCLR1	0xffd00068
+#define INTC_INTMSKCLR2	0xffd40084
+
+void __init plat_irq_setup(void)
+{
+	/* disable IRQ3-0 + IRQ7-4 */
+	__raw_writel(0xff000000, INTC_INTMSK0);
+
+	/* disable IRL3-0 + IRL7-4 */
+	__raw_writel(0xc0000000, INTC_INTMSK1);
+	__raw_writel(0xfffefffe, INTC_INTMSK2);
+
+	/* select IRL mode for IRL3-0 + IRL7-4 */
+	__raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+
+	/* disable holding function, ie enable "SH-4 Mode" */
+	__raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+
+	register_intc_controller(&intc_desc);
+}
+
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ7654:
+		/* select IRQ mode for IRL7-4 */
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
+		register_intc_controller(&intc_desc_irq4567);
+		break;
+	case IRQ_MODE_IRQ3210:
+		/* select IRQ mode for IRL3-0 */
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
+		register_intc_controller(&intc_desc_irq0123);
+		break;
+	case IRQ_MODE_IRL7654:
+		/* enable IRL7-4 but don't provide any masking */
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL3210:
+		/* enable IRL0-3 but don't provide any masking */
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL7654_MASK:
+		/* enable IRL7-4 and mask using cpu intc controller */
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_desc_irl4567);
+		break;
+	case IRQ_MODE_IRL3210_MASK:
+		/* enable IRL0-3 and mask using cpu intc controller */
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_desc_irl0123);
+		break;
+	default:
+		BUG();
+	}
+}
+
+void __init plat_mem_setup(void)
+{
+	/* Register the URAM space as Node 1 */
+	setup_bootmem_node(1, 0xe55f0000, 0xe5610000);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
new file mode 100644
index 0000000..17aac38
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -0,0 +1,842 @@
+/*
+ * SH7786 Setup
+ *
+ * Copyright (C) 2009 - 2011  Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ * Paul Mundt <paul.mundt@renesas.com>
+ *
+ * Based on SH7785 Setup
+ *
+ *  Copyright (C) 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_dma.h>
+#include <linux/sh_intc.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <cpu/dma-register.h>
+#include <asm/mmzone.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_CKE1,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffea0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x700)),
+	DEFINE_RES_IRQ(evt2irq(0x720)),
+	DEFINE_RES_IRQ(evt2irq(0x760)),
+	DEFINE_RES_IRQ(evt2irq(0x740)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+/*
+ * The rest of these all have multiplexed IRQs
+ */
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_CKE1,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffeb0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x780)),
+};
+
+static struct resource scif1_demux_resources[] = {
+	DEFINE_RES_MEM(0xffeb0000, 0x100),
+	/* Placeholders, see sh7786_devices_setup() */
+	DEFINE_RES_IRQ(0),
+	DEFINE_RES_IRQ(0),
+	DEFINE_RES_IRQ(0),
+	DEFINE_RES_IRQ(0),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_CKE1,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffec0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x840)),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_CKE1,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xffed0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x860)),
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_CKE1,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xffee0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x880)),
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.scscr		= SCSCR_REIE | SCSCR_CKE1,
+	.type		= PORT_SCIF,
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+};
+
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xffef0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x8a0)),
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80000, 0x30),
+	DEFINE_RES_IRQ(evt2irq(0x400)),
+	DEFINE_RES_IRQ(evt2irq(0x420)),
+	DEFINE_RES_IRQ(evt2irq(0x440)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu1_resources[] = {
+	DEFINE_RES_MEM(0xffda0000, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0x480)),
+	DEFINE_RES_IRQ(evt2irq(0x4a0)),
+	DEFINE_RES_IRQ(evt2irq(0x4c0)),
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh-tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu2_resources[] = {
+	DEFINE_RES_MEM(0xffdc0000, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0x7a0)),
+	DEFINE_RES_IRQ(evt2irq(0x7a0)),
+	DEFINE_RES_IRQ(evt2irq(0x7a0)),
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh-tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
+static struct sh_timer_config tmu3_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu3_resources[] = {
+	DEFINE_RES_MEM(0xffde0000, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0x7c0)),
+	DEFINE_RES_IRQ(evt2irq(0x7c0)),
+	DEFINE_RES_IRQ(evt2irq(0x7c0)),
+};
+
+static struct platform_device tmu3_device = {
+	.name		= "sh-tmu",
+	.id		= 3,
+	.dev = {
+		.platform_data	= &tmu3_platform_data,
+	},
+	.resource	= tmu3_resources,
+	.num_resources	= ARRAY_SIZE(tmu3_resources),
+};
+
+static const struct sh_dmae_channel dmac0_channels[] = {
+	{
+		.offset = 0,
+		.dmars = 0,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x10,
+		.dmars = 0,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x20,
+		.dmars = 4,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x30,
+		.dmars = 4,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x50,
+		.dmars = 8,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x60,
+		.dmars = 8,
+		.dmars_bit = 8,
+	}
+};
+
+static const unsigned int ts_shift[] = TS_SHIFT;
+
+static struct sh_dmae_pdata dma0_platform_data = {
+	.channel	= dmac0_channels,
+	.channel_num	= ARRAY_SIZE(dmac0_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+/* Resource order important! */
+static struct resource dmac0_resources[] = {
+	{
+		/* Channel registers and DMAOR */
+		.start	= 0xfe008020,
+		.end	= 0xfe00808f,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		/* DMARSx */
+		.start	= 0xfe009000,
+		.end	= 0xfe00900b,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "error_irq",
+		.start	= evt2irq(0x5c0),
+		.end	= evt2irq(0x5c0),
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		/* IRQ for channels 0-5 */
+		.start	= evt2irq(0x500),
+		.end	= evt2irq(0x5a0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dma0_device = {
+	.name		= "sh-dma-engine",
+	.id		= 0,
+	.resource	= dmac0_resources,
+	.num_resources	= ARRAY_SIZE(dmac0_resources),
+	.dev		= {
+		.platform_data	= &dma0_platform_data,
+	},
+};
+
+#define USB_EHCI_START 0xffe70000
+#define USB_OHCI_START 0xffe70400
+
+static struct resource usb_ehci_resources[] = {
+	[0] = {
+		.start	= USB_EHCI_START,
+		.end	= USB_EHCI_START + 0x3ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xba0),
+		.end	= evt2irq(0xba0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_ehci_device = {
+	.name		= "sh_ehci",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &usb_ehci_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(usb_ehci_resources),
+	.resource	= usb_ehci_resources,
+};
+
+static struct resource usb_ohci_resources[] = {
+	[0] = {
+		.start	= USB_OHCI_START,
+		.end	= USB_OHCI_START + 0x3ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xba0),
+		.end	= evt2irq(0xba0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct usb_ohci_pdata usb_ohci_pdata;
+
+static struct platform_device usb_ohci_device = {
+	.name		= "ohci-platform",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &usb_ohci_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &usb_ohci_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(usb_ohci_resources),
+	.resource	= usb_ohci_resources,
+};
+
+static struct platform_device *sh7786_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+};
+
+static struct platform_device *sh7786_devices[] __initdata = {
+	&dma0_device,
+	&usb_ehci_device,
+	&usb_ohci_device,
+};
+
+/*
+ * Please call this function if your platform board
+ * use external clock for USB
+ * */
+#define USBCTL0		0xffe70858
+#define CLOCK_MODE_MASK 0xffffff7f
+#define EXT_CLOCK_MODE  0x00000080
+
+void __init sh7786_usb_use_exclock(void)
+{
+	u32 val = __raw_readl(USBCTL0) & CLOCK_MODE_MASK;
+	__raw_writel(val | EXT_CLOCK_MODE, USBCTL0);
+}
+
+#define USBINITREG1	0xffe70094
+#define USBINITREG2	0xffe7009c
+#define USBINITVAL1	0x00ff0040
+#define USBINITVAL2	0x00000001
+
+#define USBPCTL1	0xffe70804
+#define USBST		0xffe70808
+#define PHY_ENB		0x00000001
+#define PLL_ENB		0x00000002
+#define PHY_RST		0x00000004
+#define ACT_PLL_STATUS	0xc0000000
+
+static void __init sh7786_usb_setup(void)
+{
+	int i = 1000000;
+
+	/*
+	 * USB initial settings
+	 *
+	 * The following settings are necessary
+	 * for using the USB modules.
+	 *
+	 * see "USB Initial Settings" for detail
+	 */
+	__raw_writel(USBINITVAL1, USBINITREG1);
+	__raw_writel(USBINITVAL2, USBINITREG2);
+
+	/*
+	 * Set the PHY and PLL enable bit
+	 */
+	__raw_writel(PHY_ENB | PLL_ENB, USBPCTL1);
+	while (i--) {
+		if (ACT_PLL_STATUS == (__raw_readl(USBST) & ACT_PLL_STATUS)) {
+			/* Set the PHY RST bit */
+			__raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1);
+			printk(KERN_INFO "sh7786 usb setup done\n");
+			break;
+		}
+		cpu_relax();
+	}
+}
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+	IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+	IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+	IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
+
+	IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+	IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+	IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+	IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
+
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	WDT,
+	TMU0_0, TMU0_1, TMU0_2, TMU0_3,
+	TMU1_0, TMU1_1, TMU1_2,
+	DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6,
+	HUDI1, HUDI0,
+	DMAC1_0, DMAC1_1, DMAC1_2, DMAC1_3,
+	HPB_0, HPB_1, HPB_2,
+	SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3,
+	SCIF1,
+	TMU2, TMU3,
+	SCIF2, SCIF3, SCIF4, SCIF5,
+	Eth_0, Eth_1,
+	PCIeC0_0, PCIeC0_1, PCIeC0_2,
+	PCIeC1_0, PCIeC1_1, PCIeC1_2,
+	USB,
+	I2C0, I2C1,
+	DU,
+	SSI0, SSI1, SSI2, SSI3,
+	PCIeC2_0, PCIeC2_1, PCIeC2_2,
+	HAC0, HAC1,
+	FLCTL,
+	HSPI,
+	GPIO0, GPIO1,
+	Thermal,
+	INTICI0, INTICI1, INTICI2, INTICI3,
+	INTICI4, INTICI5, INTICI6, INTICI7,
+
+	/* Muxed sub-events */
+	TXI1, BRI1, RXI1, ERI1,
+};
+
+static struct intc_vect sh7786_vectors[] __initdata = {
+	INTC_VECT(WDT, 0x3e0),
+	INTC_VECT(TMU0_0, 0x400), INTC_VECT(TMU0_1, 0x420),
+	INTC_VECT(TMU0_2, 0x440), INTC_VECT(TMU0_3, 0x460),
+	INTC_VECT(TMU1_0, 0x480), INTC_VECT(TMU1_1, 0x4a0),
+	INTC_VECT(TMU1_2, 0x4c0),
+	INTC_VECT(DMAC0_0, 0x500), INTC_VECT(DMAC0_1, 0x520),
+	INTC_VECT(DMAC0_2, 0x540), INTC_VECT(DMAC0_3, 0x560),
+	INTC_VECT(DMAC0_4, 0x580), INTC_VECT(DMAC0_5, 0x5a0),
+	INTC_VECT(DMAC0_6, 0x5c0),
+	INTC_VECT(HUDI1, 0x5e0), INTC_VECT(HUDI0, 0x600),
+	INTC_VECT(DMAC1_0, 0x620), INTC_VECT(DMAC1_1, 0x640),
+	INTC_VECT(DMAC1_2, 0x660), INTC_VECT(DMAC1_3, 0x680),
+	INTC_VECT(HPB_0, 0x6a0), INTC_VECT(HPB_1, 0x6c0),
+	INTC_VECT(HPB_2, 0x6e0),
+	INTC_VECT(SCIF0_0, 0x700), INTC_VECT(SCIF0_1, 0x720),
+	INTC_VECT(SCIF0_2, 0x740), INTC_VECT(SCIF0_3, 0x760),
+	INTC_VECT(SCIF1, 0x780),
+	INTC_VECT(TMU2, 0x7a0), INTC_VECT(TMU3, 0x7c0),
+	INTC_VECT(SCIF2, 0x840), INTC_VECT(SCIF3, 0x860),
+	INTC_VECT(SCIF4, 0x880), INTC_VECT(SCIF5, 0x8a0),
+	INTC_VECT(Eth_0, 0x8c0), INTC_VECT(Eth_1, 0x8e0),
+	INTC_VECT(PCIeC0_0, 0xae0), INTC_VECT(PCIeC0_1, 0xb00),
+	INTC_VECT(PCIeC0_2, 0xb20),
+	INTC_VECT(PCIeC1_0, 0xb40), INTC_VECT(PCIeC1_1, 0xb60),
+	INTC_VECT(PCIeC1_2, 0xb80),
+	INTC_VECT(USB, 0xba0),
+	INTC_VECT(I2C0, 0xcc0), INTC_VECT(I2C1, 0xce0),
+	INTC_VECT(DU, 0xd00),
+	INTC_VECT(SSI0, 0xd20), INTC_VECT(SSI1, 0xd40),
+	INTC_VECT(SSI2, 0xd60), INTC_VECT(SSI3, 0xd80),
+	INTC_VECT(PCIeC2_0, 0xda0), INTC_VECT(PCIeC2_1, 0xdc0),
+	INTC_VECT(PCIeC2_2, 0xde0),
+	INTC_VECT(HAC0, 0xe00), INTC_VECT(HAC1, 0xe20),
+	INTC_VECT(FLCTL, 0xe40),
+	INTC_VECT(HSPI, 0xe80),
+	INTC_VECT(GPIO0, 0xea0), INTC_VECT(GPIO1, 0xec0),
+	INTC_VECT(Thermal, 0xee0),
+	INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20),
+	INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60),
+	INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0),
+	INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0),
+};
+
+#define CnINTMSK0	0xfe410030
+#define CnINTMSK1	0xfe410040
+#define CnINTMSKCLR0	0xfe410050
+#define CnINTMSKCLR1	0xfe410060
+#define CnINT2MSKR0	0xfe410a20
+#define CnINT2MSKR1	0xfe410a24
+#define CnINT2MSKR2	0xfe410a28
+#define CnINT2MSKR3	0xfe410a2c
+#define CnINT2MSKCR0	0xfe410a30
+#define CnINT2MSKCR1	0xfe410a34
+#define CnINT2MSKCR2	0xfe410a38
+#define CnINT2MSKCR3	0xfe410a3c
+#define INTMSK2		0xfe410068
+#define INTMSKCLR2	0xfe41006c
+
+#define INTDISTCR0	0xfe4100b0
+#define INTDISTCR1	0xfe4100b4
+#define INT2DISTCR0	0xfe410900
+#define INT2DISTCR1	0xfe410904
+#define INT2DISTCR2	0xfe410908
+#define INT2DISTCR3	0xfe41090c
+
+static struct intc_mask_reg sh7786_mask_registers[] __initdata = {
+	{ CnINTMSK0, CnINTMSKCLR0, 32,
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 },
+	    INTC_SMP_BALANCING(INTDISTCR0) },
+	{ INTMSK2, INTMSKCLR2, 32,
+	  { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+	    IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+	    IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+	    IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
+	    IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+	    IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+	    IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+	    IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
+	{ CnINT2MSKR0, CnINT2MSKCR0 , 32,
+	  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, WDT },
+	    INTC_SMP_BALANCING(INT2DISTCR0) },
+	{ CnINT2MSKR1, CnINT2MSKCR1, 32,
+	  { TMU0_0, TMU0_1, TMU0_2, TMU0_3, TMU1_0, TMU1_1, TMU1_2, 0,
+	    DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6,
+	    HUDI1, HUDI0,
+	    DMAC1_0, DMAC1_1, DMAC1_2, DMAC1_3,
+	    HPB_0, HPB_1, HPB_2,
+	    SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3,
+	    SCIF1,
+	    TMU2, TMU3, 0, }, INTC_SMP_BALANCING(INT2DISTCR1) },
+	{ CnINT2MSKR2, CnINT2MSKCR2, 32,
+	  { 0, 0, SCIF2, SCIF3, SCIF4, SCIF5,
+	    Eth_0, Eth_1,
+	    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	    PCIeC0_0, PCIeC0_1, PCIeC0_2,
+	    PCIeC1_0, PCIeC1_1, PCIeC1_2,
+	    USB, 0, 0 }, INTC_SMP_BALANCING(INT2DISTCR2) },
+	{ CnINT2MSKR3, CnINT2MSKCR3, 32,
+	  { 0, 0, 0, 0, 0, 0,
+	    I2C0, I2C1,
+	    DU, SSI0, SSI1, SSI2, SSI3,
+	    PCIeC2_0, PCIeC2_1, PCIeC2_2,
+	    HAC0, HAC1,
+	    FLCTL, 0,
+	    HSPI, GPIO0, GPIO1, Thermal,
+	    0, 0, 0, 0, 0, 0, 0, 0 }, INTC_SMP_BALANCING(INT2DISTCR3) },
+};
+
+static struct intc_prio_reg sh7786_prio_registers[] __initdata = {
+	{ 0xfe410010, 0, 32, 4, /* INTPRI */   { IRQ0, IRQ1, IRQ2, IRQ3,
+						 IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ 0xfe410800, 0, 32, 8, /* INT2PRI0 */ { 0, 0, 0, WDT } },
+	{ 0xfe410804, 0, 32, 8, /* INT2PRI1 */ { TMU0_0, TMU0_1,
+						 TMU0_2, TMU0_3 } },
+	{ 0xfe410808, 0, 32, 8, /* INT2PRI2 */ { TMU1_0, TMU1_1,
+						 TMU1_2, 0 } },
+	{ 0xfe41080c, 0, 32, 8, /* INT2PRI3 */ { DMAC0_0, DMAC0_1,
+						 DMAC0_2, DMAC0_3 } },
+	{ 0xfe410810, 0, 32, 8, /* INT2PRI4 */ { DMAC0_4, DMAC0_5,
+						 DMAC0_6, HUDI1 } },
+	{ 0xfe410814, 0, 32, 8, /* INT2PRI5 */ { HUDI0, DMAC1_0,
+						 DMAC1_1, DMAC1_2 } },
+	{ 0xfe410818, 0, 32, 8, /* INT2PRI6 */ { DMAC1_3, HPB_0,
+						 HPB_1, HPB_2 } },
+	{ 0xfe41081c, 0, 32, 8, /* INT2PRI7 */ { SCIF0_0, SCIF0_1,
+						 SCIF0_2, SCIF0_3 } },
+	{ 0xfe410820, 0, 32, 8, /* INT2PRI8 */ { SCIF1, TMU2, TMU3, 0 } },
+	{ 0xfe410824, 0, 32, 8, /* INT2PRI9 */ { 0, 0, SCIF2, SCIF3 } },
+	{ 0xfe410828, 0, 32, 8, /* INT2PRI10 */ { SCIF4, SCIF5,
+						  Eth_0, Eth_1 } },
+	{ 0xfe41082c, 0, 32, 8, /* INT2PRI11 */ { 0, 0, 0, 0 } },
+	{ 0xfe410830, 0, 32, 8, /* INT2PRI12 */ { 0, 0, 0, 0 } },
+	{ 0xfe410834, 0, 32, 8, /* INT2PRI13 */ { 0, 0, 0, 0 } },
+	{ 0xfe410838, 0, 32, 8, /* INT2PRI14 */ { 0, 0, 0, PCIeC0_0 } },
+	{ 0xfe41083c, 0, 32, 8, /* INT2PRI15 */ { PCIeC0_1, PCIeC0_2,
+						  PCIeC1_0, PCIeC1_1 } },
+	{ 0xfe410840, 0, 32, 8, /* INT2PRI16 */ { PCIeC1_2, USB, 0, 0 } },
+	{ 0xfe410844, 0, 32, 8, /* INT2PRI17 */ { 0, 0, 0, 0 } },
+	{ 0xfe410848, 0, 32, 8, /* INT2PRI18 */ { 0, 0, I2C0, I2C1 } },
+	{ 0xfe41084c, 0, 32, 8, /* INT2PRI19 */ { DU, SSI0, SSI1, SSI2 } },
+	{ 0xfe410850, 0, 32, 8, /* INT2PRI20 */ { SSI3, PCIeC2_0,
+						  PCIeC2_1, PCIeC2_2 } },
+	{ 0xfe410854, 0, 32, 8, /* INT2PRI21 */ { HAC0, HAC1, FLCTL, 0 } },
+	{ 0xfe410858, 0, 32, 8, /* INT2PRI22 */ { HSPI, GPIO0,
+						  GPIO1, Thermal } },
+	{ 0xfe41085c, 0, 32, 8, /* INT2PRI23 */ { 0, 0, 0, 0 } },
+	{ 0xfe410860, 0, 32, 8, /* INT2PRI24 */ { 0, 0, 0, 0 } },
+	{ 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */
+	  { INTICI7, INTICI6, INTICI5, INTICI4,
+	    INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 2) },
+};
+
+static struct intc_subgroup sh7786_subgroups[] __initdata = {
+	{ 0xfe410c20, 32, SCIF1,
+	  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, TXI1, BRI1, RXI1, ERI1 } },
+};
+
+static struct intc_desc sh7786_intc_desc __initdata = {
+	.name		= "sh7786",
+	.hw		= {
+		.vectors	= sh7786_vectors,
+		.nr_vectors	= ARRAY_SIZE(sh7786_vectors),
+		.mask_regs	= sh7786_mask_registers,
+		.nr_mask_regs	= ARRAY_SIZE(sh7786_mask_registers),
+		.subgroups	= sh7786_subgroups,
+		.nr_subgroups	= ARRAY_SIZE(sh7786_subgroups),
+		.prio_regs	= sh7786_prio_registers,
+		.nr_prio_regs	= ARRAY_SIZE(sh7786_prio_registers),
+	},
+};
+
+/* Support for external interrupt pins in IRQ mode */
+static struct intc_vect vectors_irq0123[] __initdata = {
+	INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240),
+	INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0),
+};
+
+static struct intc_vect vectors_irq4567[] __initdata = {
+	INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340),
+	INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0),
+};
+
+static struct intc_sense_reg sh7786_sense_registers[] __initdata = {
+	{ 0xfe41001c, 32, 2, /* ICR1 */   { IRQ0, IRQ1, IRQ2, IRQ3,
+					    IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg sh7786_ack_registers[] __initdata = {
+	{ 0xfe410024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7786-irq0123",
+			     vectors_irq0123, NULL, sh7786_mask_registers,
+			     sh7786_prio_registers, sh7786_sense_registers,
+			     sh7786_ack_registers);
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7786-irq4567",
+			     vectors_irq4567, NULL, sh7786_mask_registers,
+			     sh7786_prio_registers, sh7786_sense_registers,
+			     sh7786_ack_registers);
+
+/* External interrupt pins in IRL mode */
+
+static struct intc_vect vectors_irl0123[] __initdata = {
+	INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
+	INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
+	INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
+	INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
+	INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
+	INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
+	INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
+	INTC_VECT(IRL0_HHHL, 0x3c0),
+};
+
+static struct intc_vect vectors_irl4567[] __initdata = {
+	INTC_VECT(IRL4_LLLL, 0x900), INTC_VECT(IRL4_LLLH, 0x920),
+	INTC_VECT(IRL4_LLHL, 0x940), INTC_VECT(IRL4_LLHH, 0x960),
+	INTC_VECT(IRL4_LHLL, 0x980), INTC_VECT(IRL4_LHLH, 0x9a0),
+	INTC_VECT(IRL4_LHHL, 0x9c0), INTC_VECT(IRL4_LHHH, 0x9e0),
+	INTC_VECT(IRL4_HLLL, 0xa00), INTC_VECT(IRL4_HLLH, 0xa20),
+	INTC_VECT(IRL4_HLHL, 0xa40), INTC_VECT(IRL4_HLHH, 0xa60),
+	INTC_VECT(IRL4_HHLL, 0xa80), INTC_VECT(IRL4_HHLH, 0xaa0),
+	INTC_VECT(IRL4_HHHL, 0xac0),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7786-irl0123", vectors_irl0123,
+			 NULL, sh7786_mask_registers, NULL, NULL);
+
+static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7786-irl4567", vectors_irl4567,
+			 NULL, sh7786_mask_registers, NULL, NULL);
+
+#define INTC_ICR0	0xfe410000
+#define INTC_INTMSK0	CnINTMSK0
+#define INTC_INTMSK1	CnINTMSK1
+#define INTC_INTMSK2	INTMSK2
+#define INTC_INTMSKCLR1	CnINTMSKCLR1
+#define INTC_INTMSKCLR2	INTMSKCLR2
+
+void __init plat_irq_setup(void)
+{
+	/* disable IRQ3-0 + IRQ7-4 */
+	__raw_writel(0xff000000, INTC_INTMSK0);
+
+	/* disable IRL3-0 + IRL7-4 */
+	__raw_writel(0xc0000000, INTC_INTMSK1);
+	__raw_writel(0xfffefffe, INTC_INTMSK2);
+
+	/* select IRL mode for IRL3-0 + IRL7-4 */
+	__raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+
+	register_intc_controller(&sh7786_intc_desc);
+}
+
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ7654:
+		/* select IRQ mode for IRL7-4 */
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
+		register_intc_controller(&intc_desc_irq4567);
+		break;
+	case IRQ_MODE_IRQ3210:
+		/* select IRQ mode for IRL3-0 */
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
+		register_intc_controller(&intc_desc_irq0123);
+		break;
+	case IRQ_MODE_IRL7654:
+		/* enable IRL7-4 but don't provide any masking */
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL3210:
+		/* enable IRL0-3 but don't provide any masking */
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL7654_MASK:
+		/* enable IRL7-4 and mask using cpu intc controller */
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_desc_irl4567);
+		break;
+	case IRQ_MODE_IRL3210_MASK:
+		/* enable IRL0-3 and mask using cpu intc controller */
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_desc_irl0123);
+		break;
+	default:
+		BUG();
+	}
+}
+
+void __init plat_mem_setup(void)
+{
+}
+
+static int __init sh7786_devices_setup(void)
+{
+	int ret, irq;
+
+	sh7786_usb_setup();
+
+	/*
+	 * De-mux SCIF1 IRQs if possible
+	 */
+	irq = intc_irq_lookup(sh7786_intc_desc.name, TXI1);
+	if (irq > 0) {
+		scif1_demux_resources[1].start =
+			intc_irq_lookup(sh7786_intc_desc.name, ERI1);
+		scif1_demux_resources[2].start =
+			intc_irq_lookup(sh7786_intc_desc.name, RXI1);
+		scif1_demux_resources[3].start = irq;
+		scif1_demux_resources[4].start =
+			intc_irq_lookup(sh7786_intc_desc.name, BRI1);
+
+		scif1_device.resource = scif1_demux_resources;
+		scif1_device.num_resources = ARRAY_SIZE(scif1_demux_resources);
+	}
+
+	ret = platform_add_devices(sh7786_early_devices,
+				   ARRAY_SIZE(sh7786_early_devices));
+	if (unlikely(ret != 0))
+		return ret;
+
+	return platform_add_devices(sh7786_devices,
+				    ARRAY_SIZE(sh7786_devices));
+}
+arch_initcall(sh7786_devices_setup);
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7786_early_devices,
+				   ARRAY_SIZE(sh7786_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-shx3.c
new file mode 100644
index 0000000..ee14d92
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -0,0 +1,398 @@
+/*
+ * SH-X3 Prototype Setup
+ *
+ *  Copyright (C) 2007 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/sh_timer.h>
+#include <linux/sh_intc.h>
+#include <cpu/shx3.h>
+#include <asm/mmzone.h>
+
+/*
+ * This intentionally only registers SCIF ports 0, 1, and 3. SCIF 2
+ * INTEVT values overlap with the FPU EXPEVT ones, requiring special
+ * demuxing in the exception dispatch path.
+ *
+ * As this overlap is something that never should have made it in to
+ * silicon in the first place, we just refuse to deal with the port at
+ * all rather than adding infrastructure to hack around it.
+ */
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffc30000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x700)),
+	DEFINE_RES_IRQ(evt2irq(0x720)),
+	DEFINE_RES_IRQ(evt2irq(0x760)),
+	DEFINE_RES_IRQ(evt2irq(0x740)),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffc40000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x780)),
+	DEFINE_RES_IRQ(evt2irq(0x7a0)),
+	DEFINE_RES_IRQ(evt2irq(0x7e0)),
+	DEFINE_RES_IRQ(evt2irq(0x7c0)),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffc60000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x880)),
+	DEFINE_RES_IRQ(evt2irq(0x8a0)),
+	DEFINE_RES_IRQ(evt2irq(0x8e0)),
+	DEFINE_RES_IRQ(evt2irq(0x8c0)),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffc10000, 0x30),
+	DEFINE_RES_IRQ(evt2irq(0x400)),
+	DEFINE_RES_IRQ(evt2irq(0x420)),
+	DEFINE_RES_IRQ(evt2irq(0x440)),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu1_resources[] = {
+	DEFINE_RES_MEM(0xffc20000, 0x2c),
+	DEFINE_RES_IRQ(evt2irq(0x460)),
+	DEFINE_RES_IRQ(evt2irq(0x480)),
+	DEFINE_RES_IRQ(evt2irq(0x4a0)),
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh-tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct platform_device *shx3_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&tmu0_device,
+	&tmu1_device,
+};
+
+static int __init shx3_devices_setup(void)
+{
+	return platform_add_devices(shx3_early_devices,
+				   ARRAY_SIZE(shx3_early_devices));
+}
+arch_initcall(shx3_devices_setup);
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(shx3_early_devices,
+				   ARRAY_SIZE(shx3_early_devices));
+}
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	IRL_HHLL, IRL_HHLH, IRL_HHHL,
+	IRQ0, IRQ1, IRQ2, IRQ3,
+	HUDII,
+	TMU0, TMU1, TMU2, TMU3, TMU4, TMU5,
+	PCII0, PCII1, PCII2, PCII3, PCII4,
+	PCII5, PCII6, PCII7, PCII8, PCII9,
+	SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
+	SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
+	SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
+	SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI,
+	DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3,
+	DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE,
+	DU,
+	DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9,
+	DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE,
+	IIC, VIN0, VIN1, VCORE0, ATAPI,
+	DTU0, DTU1, DTU2, DTU3,
+	FE0, FE1,
+	GPIO0, GPIO1, GPIO2, GPIO3,
+	PAM, IRM,
+	INTICI0, INTICI1, INTICI2, INTICI3,
+	INTICI4, INTICI5, INTICI6, INTICI7,
+
+	/* interrupt groups */
+	IRL, PCII56789, SCIF0, SCIF1, SCIF2, SCIF3,
+	DMAC0, DMAC1,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(HUDII, 0x3e0),
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440), INTC_VECT(TMU3, 0x460),
+	INTC_VECT(TMU4, 0x480), INTC_VECT(TMU5, 0x4a0),
+	INTC_VECT(PCII0, 0x500), INTC_VECT(PCII1, 0x520),
+	INTC_VECT(PCII2, 0x540), INTC_VECT(PCII3, 0x560),
+	INTC_VECT(PCII4, 0x580), INTC_VECT(PCII5, 0x5a0),
+	INTC_VECT(PCII6, 0x5c0), INTC_VECT(PCII7, 0x5e0),
+	INTC_VECT(PCII8, 0x600), INTC_VECT(PCII9, 0x620),
+	INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720),
+	INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760),
+	INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0),
+	INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0),
+	INTC_VECT(SCIF3_ERI, 0x880), INTC_VECT(SCIF3_RXI, 0x8a0),
+	INTC_VECT(SCIF3_BRI, 0x8c0), INTC_VECT(SCIF3_TXI, 0x8e0),
+	INTC_VECT(DMAC0_DMINT0, 0x900), INTC_VECT(DMAC0_DMINT1, 0x920),
+	INTC_VECT(DMAC0_DMINT2, 0x940), INTC_VECT(DMAC0_DMINT3, 0x960),
+	INTC_VECT(DMAC0_DMINT4, 0x980), INTC_VECT(DMAC0_DMINT5, 0x9a0),
+	INTC_VECT(DMAC0_DMAE, 0x9c0),
+	INTC_VECT(DU, 0x9e0),
+	INTC_VECT(DMAC1_DMINT6, 0xa00), INTC_VECT(DMAC1_DMINT7, 0xa20),
+	INTC_VECT(DMAC1_DMINT8, 0xa40), INTC_VECT(DMAC1_DMINT9, 0xa60),
+	INTC_VECT(DMAC1_DMINT10, 0xa80), INTC_VECT(DMAC1_DMINT11, 0xaa0),
+	INTC_VECT(DMAC1_DMAE, 0xac0),
+	INTC_VECT(IIC, 0xae0),
+	INTC_VECT(VIN0, 0xb00), INTC_VECT(VIN1, 0xb20),
+	INTC_VECT(VCORE0, 0xb00), INTC_VECT(ATAPI, 0xb60),
+	INTC_VECT(DTU0, 0xc00), INTC_VECT(DTU0, 0xc20),
+	INTC_VECT(DTU0, 0xc40),
+	INTC_VECT(DTU1, 0xc60), INTC_VECT(DTU1, 0xc80),
+	INTC_VECT(DTU1, 0xca0),
+	INTC_VECT(DTU2, 0xcc0), INTC_VECT(DTU2, 0xce0),
+	INTC_VECT(DTU2, 0xd00),
+	INTC_VECT(DTU3, 0xd20), INTC_VECT(DTU3, 0xd40),
+	INTC_VECT(DTU3, 0xd60),
+	INTC_VECT(FE0, 0xe00), INTC_VECT(FE1, 0xe20),
+	INTC_VECT(GPIO0, 0xe40), INTC_VECT(GPIO1, 0xe60),
+	INTC_VECT(GPIO2, 0xe80), INTC_VECT(GPIO3, 0xea0),
+	INTC_VECT(PAM, 0xec0), INTC_VECT(IRM, 0xee0),
+	INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20),
+	INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60),
+	INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0),
+	INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(IRL, IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+		   IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+		   IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+		   IRL_HHLL, IRL_HHLH, IRL_HHHL),
+	INTC_GROUP(PCII56789, PCII5, PCII6, PCII7, PCII8, PCII9),
+	INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
+	INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
+	INTC_GROUP(SCIF3, SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI),
+	INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
+		   DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
+	INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8,
+		   DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11),
+};
+
+#define INT2DISTCR0	0xfe4108a0
+#define INT2DISTCR1	0xfe4108a4
+#define INT2DISTCR2	0xfe4108a8
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xfe410030, 0xfe410050, 32, /* CnINTMSK0 / CnINTMSKCLR0 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3 } },
+	{ 0xfe410040, 0xfe410060, 32, /* CnINTMSK1 / CnINTMSKCLR1 */
+	  { IRL } },
+	{ 0xfe410820, 0xfe410850, 32, /* CnINT2MSK0 / CnINT2MSKCLR0 */
+	  { FE1, FE0, 0, ATAPI, VCORE0, VIN1, VIN0, IIC,
+	    DU, GPIO3, GPIO2, GPIO1, GPIO0, PAM, 0, 0,
+	    0, 0, 0, 0, 0, 0, 0, 0, /* HUDI bits ignored */
+	    0, TMU5, TMU4, TMU3, TMU2, TMU1, TMU0, 0, },
+	    INTC_SMP_BALANCING(INT2DISTCR0) },
+	{ 0xfe410830, 0xfe410860, 32, /* CnINT2MSK1 / CnINT2MSKCLR1 */
+	  { 0, 0, 0, 0, DTU3, DTU2, DTU1, DTU0, /* IRM bits ignored */
+	    PCII9, PCII8, PCII7, PCII6, PCII5, PCII4, PCII3, PCII2,
+	    PCII1, PCII0, DMAC1_DMAE, DMAC1_DMINT11,
+	    DMAC1_DMINT10, DMAC1_DMINT9, DMAC1_DMINT8, DMAC1_DMINT7,
+	    DMAC1_DMINT6, DMAC0_DMAE, DMAC0_DMINT5, DMAC0_DMINT4,
+	    DMAC0_DMINT3, DMAC0_DMINT2, DMAC0_DMINT1, DMAC0_DMINT0 },
+	    INTC_SMP_BALANCING(INT2DISTCR1) },
+	{ 0xfe410840, 0xfe410870, 32, /* CnINT2MSK2 / CnINT2MSKCLR2 */
+	  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	    SCIF3_TXI, SCIF3_BRI, SCIF3_RXI, SCIF3_ERI,
+	    SCIF2_TXI, SCIF2_BRI, SCIF2_RXI, SCIF2_ERI,
+	    SCIF1_TXI, SCIF1_BRI, SCIF1_RXI, SCIF1_ERI,
+	    SCIF0_TXI, SCIF0_BRI, SCIF0_RXI, SCIF0_ERI },
+	    INTC_SMP_BALANCING(INT2DISTCR2) },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xfe410010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+
+	{ 0xfe410800, 0, 32, 4, /* INT2PRI0 */ { 0, HUDII, TMU5, TMU4,
+						 TMU3, TMU2, TMU1, TMU0 } },
+	{ 0xfe410804, 0, 32, 4, /* INT2PRI1 */ { DTU3, DTU2, DTU1, DTU0,
+						 SCIF3, SCIF2,
+						 SCIF1, SCIF0 } },
+	{ 0xfe410808, 0, 32, 4, /* INT2PRI2 */ { DMAC1, DMAC0,
+						 PCII56789, PCII4,
+						 PCII3, PCII2,
+						 PCII1, PCII0 } },
+	{ 0xfe41080c, 0, 32, 4, /* INT2PRI3 */ { FE1, FE0, ATAPI, VCORE0,
+						 VIN1, VIN0, IIC, DU} },
+	{ 0xfe410810, 0, 32, 4, /* INT2PRI4 */ { 0, 0, PAM, GPIO3,
+						 GPIO2, GPIO1, GPIO0, IRM } },
+	{ 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */
+	  { INTICI7, INTICI6, INTICI5, INTICI4,
+	    INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 4) },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "shx3", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+/* Support for external interrupt pins in IRQ mode */
+static struct intc_vect vectors_irq[] __initdata = {
+	INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
+	INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xfe41001c, 32, 2, /* ICR1 */   { IRQ0, IRQ1, IRQ2, IRQ3 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc_irq, "shx3-irq", vectors_irq, groups,
+			 mask_registers, prio_registers, sense_registers);
+
+/* External interrupt pins in IRL mode */
+static struct intc_vect vectors_irl[] __initdata = {
+	INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
+	INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
+	INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
+	INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
+	INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
+	INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
+	INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
+	INTC_VECT(IRL_HHHL, 0x3c0),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irl, "shx3-irl", vectors_irl, groups,
+			 mask_registers, prio_registers, NULL);
+
+void __init plat_irq_setup_pins(int mode)
+{
+	int ret = 0;
+
+	switch (mode) {
+	case IRQ_MODE_IRQ:
+		ret |= gpio_request(GPIO_FN_IRQ3, intc_desc_irq.name);
+		ret |= gpio_request(GPIO_FN_IRQ2, intc_desc_irq.name);
+		ret |= gpio_request(GPIO_FN_IRQ1, intc_desc_irq.name);
+		ret |= gpio_request(GPIO_FN_IRQ0, intc_desc_irq.name);
+
+		if (unlikely(ret)) {
+			pr_err("Failed to set IRQ mode\n");
+			return;
+		}
+
+		register_intc_controller(&intc_desc_irq);
+		break;
+	case IRQ_MODE_IRL3210:
+		ret |= gpio_request(GPIO_FN_IRL3, intc_desc_irl.name);
+		ret |= gpio_request(GPIO_FN_IRL2, intc_desc_irl.name);
+		ret |= gpio_request(GPIO_FN_IRL1, intc_desc_irl.name);
+		ret |= gpio_request(GPIO_FN_IRL0, intc_desc_irl.name);
+
+		if (unlikely(ret)) {
+			pr_err("Failed to set IRL mode\n");
+			return;
+		}
+
+		register_intc_controller(&intc_desc_irl);
+		break;
+	default:
+		BUG();
+	}
+}
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
+
+void __init plat_mem_setup(void)
+{
+	unsigned int nid = 1;
+
+	/* Register CPU#0 URAM space as Node 1 */
+	setup_bootmem_node(nid++, 0x145f0000, 0x14610000);	/* CPU0 */
+
+#if 0
+	/* XXX: Not yet.. */
+	setup_bootmem_node(nid++, 0x14df0000, 0x14e10000);	/* CPU1 */
+	setup_bootmem_node(nid++, 0x155f0000, 0x15610000);	/* CPU2 */
+	setup_bootmem_node(nid++, 0x15df0000, 0x15e10000);	/* CPU3 */
+#endif
+
+	setup_bootmem_node(nid++, 0x16000000, 0x16020000);	/* CSM */
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/smp-shx3.c
new file mode 100644
index 0000000..0d3637c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -0,0 +1,148 @@
+/*
+ * SH-X3 SMP
+ *
+ *  Copyright (C) 2007 - 2010  Paul Mundt
+ *  Copyright (C) 2007  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/cpumask.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/cpu.h>
+#include <asm/sections.h>
+
+#define STBCR_REG(phys_id) (0xfe400004 | (phys_id << 12))
+#define RESET_REG(phys_id) (0xfe400008 | (phys_id << 12))
+
+#define STBCR_MSTP	0x00000001
+#define STBCR_RESET	0x00000002
+#define STBCR_SLEEP	0x00000004
+#define STBCR_LTSLP	0x80000000
+
+static irqreturn_t ipi_interrupt_handler(int irq, void *arg)
+{
+	unsigned int message = (unsigned int)(long)arg;
+	unsigned int cpu = hard_smp_processor_id();
+	unsigned int offs = 4 * cpu;
+	unsigned int x;
+
+	x = __raw_readl(0xfe410070 + offs); /* C0INITICI..CnINTICI */
+	x &= (1 << (message << 2));
+	__raw_writel(x, 0xfe410080 + offs); /* C0INTICICLR..CnINTICICLR */
+
+	smp_message_recv(message);
+
+	return IRQ_HANDLED;
+}
+
+static void shx3_smp_setup(void)
+{
+	unsigned int cpu = 0;
+	int i, num;
+
+	init_cpu_possible(cpumask_of(cpu));
+
+	/* Enable light sleep for the boot CPU */
+	__raw_writel(__raw_readl(STBCR_REG(cpu)) | STBCR_LTSLP, STBCR_REG(cpu));
+
+	__cpu_number_map[0] = 0;
+	__cpu_logical_map[0] = 0;
+
+	/*
+	 * Do this stupidly for now.. we don't have an easy way to probe
+	 * for the total number of cores.
+	 */
+	for (i = 1, num = 0; i < NR_CPUS; i++) {
+		set_cpu_possible(i, true);
+		__cpu_number_map[i] = ++num;
+		__cpu_logical_map[num] = i;
+	}
+
+        printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+}
+
+static void shx3_prepare_cpus(unsigned int max_cpus)
+{
+	int i;
+
+	BUILD_BUG_ON(SMP_MSG_NR >= 8);
+
+	for (i = 0; i < SMP_MSG_NR; i++)
+		request_irq(104 + i, ipi_interrupt_handler,
+			    IRQF_PERCPU, "IPI", (void *)(long)i);
+
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
+}
+
+static void shx3_start_cpu(unsigned int cpu, unsigned long entry_point)
+{
+	if (__in_29bit_mode())
+		__raw_writel(entry_point, RESET_REG(cpu));
+	else
+		__raw_writel(virt_to_phys(entry_point), RESET_REG(cpu));
+
+	if (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
+		__raw_writel(STBCR_MSTP, STBCR_REG(cpu));
+
+	while (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
+		cpu_relax();
+
+	/* Start up secondary processor by sending a reset */
+	__raw_writel(STBCR_RESET | STBCR_LTSLP, STBCR_REG(cpu));
+}
+
+static unsigned int shx3_smp_processor_id(void)
+{
+	return __raw_readl(0xff000048); /* CPIDR */
+}
+
+static void shx3_send_ipi(unsigned int cpu, unsigned int message)
+{
+	unsigned long addr = 0xfe410070 + (cpu * 4);
+
+	BUG_ON(cpu >= 4);
+
+	__raw_writel(1 << (message << 2), addr); /* C0INTICI..CnINTICI */
+}
+
+static void shx3_update_boot_vector(unsigned int cpu)
+{
+	__raw_writel(STBCR_MSTP, STBCR_REG(cpu));
+	while (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
+		cpu_relax();
+	__raw_writel(STBCR_RESET, STBCR_REG(cpu));
+}
+
+static int shx3_cpu_prepare(unsigned int cpu)
+{
+	shx3_update_boot_vector(cpu);
+	return 0;
+}
+
+static int register_shx3_cpu_notifier(void)
+{
+	cpuhp_setup_state_nocalls(CPUHP_SH_SH3X_PREPARE, "sh/shx3:prepare",
+				  shx3_cpu_prepare, NULL);
+	return 0;
+}
+late_initcall(register_shx3_cpu_notifier);
+
+struct plat_smp_ops shx3_smp_ops = {
+	.smp_setup		= shx3_smp_setup,
+	.prepare_cpus		= shx3_prepare_cpus,
+	.start_cpu		= shx3_start_cpu,
+	.smp_processor_id	= shx3_smp_processor_id,
+	.send_ipi		= shx3_send_ipi,
+	.cpu_die		= native_cpu_die,
+	.cpu_disable		= native_cpu_disable,
+	.play_dead		= native_play_dead,
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/ubc.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/ubc.c
new file mode 100644
index 0000000..efb2745
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh4a/ubc.c
@@ -0,0 +1,133 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/ubc.c
+ *
+ * On-chip UBC support for SH-4A CPUs.
+ *
+ * Copyright (C) 2009 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <asm/hw_breakpoint.h>
+
+#define UBC_CBR(idx)	(0xff200000 + (0x20 * idx))
+#define UBC_CRR(idx)	(0xff200004 + (0x20 * idx))
+#define UBC_CAR(idx)	(0xff200008 + (0x20 * idx))
+#define UBC_CAMR(idx)	(0xff20000c + (0x20 * idx))
+
+#define UBC_CCMFR	0xff200600
+#define UBC_CBCR	0xff200620
+
+/* CRR */
+#define UBC_CRR_PCB	(1 << 1)
+#define UBC_CRR_BIE	(1 << 0)
+
+/* CBR */
+#define UBC_CBR_CE	(1 << 0)
+
+static struct sh_ubc sh4a_ubc;
+
+static void sh4a_ubc_enable(struct arch_hw_breakpoint *info, int idx)
+{
+	__raw_writel(UBC_CBR_CE | info->len | info->type, UBC_CBR(idx));
+	__raw_writel(info->address, UBC_CAR(idx));
+}
+
+static void sh4a_ubc_disable(struct arch_hw_breakpoint *info, int idx)
+{
+	__raw_writel(0, UBC_CBR(idx));
+	__raw_writel(0, UBC_CAR(idx));
+}
+
+static void sh4a_ubc_enable_all(unsigned long mask)
+{
+	int i;
+
+	for (i = 0; i < sh4a_ubc.num_events; i++)
+		if (mask & (1 << i))
+			__raw_writel(__raw_readl(UBC_CBR(i)) | UBC_CBR_CE,
+				     UBC_CBR(i));
+}
+
+static void sh4a_ubc_disable_all(void)
+{
+	int i;
+
+	for (i = 0; i < sh4a_ubc.num_events; i++)
+		__raw_writel(__raw_readl(UBC_CBR(i)) & ~UBC_CBR_CE,
+			     UBC_CBR(i));
+}
+
+static unsigned long sh4a_ubc_active_mask(void)
+{
+	unsigned long active = 0;
+	int i;
+
+	for (i = 0; i < sh4a_ubc.num_events; i++)
+		if (__raw_readl(UBC_CBR(i)) & UBC_CBR_CE)
+			active |= (1 << i);
+
+	return active;
+}
+
+static unsigned long sh4a_ubc_triggered_mask(void)
+{
+	return __raw_readl(UBC_CCMFR);
+}
+
+static void sh4a_ubc_clear_triggered_mask(unsigned long mask)
+{
+	__raw_writel(__raw_readl(UBC_CCMFR) & ~mask, UBC_CCMFR);
+}
+
+static struct sh_ubc sh4a_ubc = {
+	.name			= "SH-4A",
+	.num_events		= 2,
+	.trap_nr		= 0x1e0,
+	.enable			= sh4a_ubc_enable,
+	.disable		= sh4a_ubc_disable,
+	.enable_all		= sh4a_ubc_enable_all,
+	.disable_all		= sh4a_ubc_disable_all,
+	.active_mask		= sh4a_ubc_active_mask,
+	.triggered_mask		= sh4a_ubc_triggered_mask,
+	.clear_triggered_mask	= sh4a_ubc_clear_triggered_mask,
+};
+
+static int __init sh4a_ubc_init(void)
+{
+	struct clk *ubc_iclk = clk_get(NULL, "ubc0");
+	int i;
+
+	/*
+	 * The UBC MSTP bit is optional, as not all platforms will have
+	 * it. Just ignore it if we can't find it.
+	 */
+	if (IS_ERR(ubc_iclk))
+		ubc_iclk = NULL;
+
+	clk_enable(ubc_iclk);
+
+	__raw_writel(0, UBC_CBCR);
+
+	for (i = 0; i < sh4a_ubc.num_events; i++) {
+		__raw_writel(0, UBC_CAMR(i));
+		__raw_writel(0, UBC_CBR(i));
+
+		__raw_writel(UBC_CRR_BIE | UBC_CRR_PCB, UBC_CRR(i));
+
+		/* dummy read for write posting */
+		(void)__raw_readl(UBC_CRR(i));
+	}
+
+	clk_disable(ubc_iclk);
+
+	sh4a_ubc.clk = ubc_iclk;
+
+	return register_sh_ubc(&sh4a_ubc);
+}
+arch_initcall(sh4a_ubc_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/Makefile b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/Makefile
new file mode 100644
index 0000000..97d23ec
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Linux/SuperH SH-5 backends.
+#
+obj-y := entry.o probe.o switchto.o
+
+obj-$(CONFIG_SH_FPU)		+= fpu.o
+obj-$(CONFIG_KALLSYMS)		+= unwind.o
+
+# CPU subtype setup
+obj-$(CONFIG_CPU_SH5)		+= setup-sh5.o
+
+# Primary on-chip clocks (common)
+clock-$(CONFIG_CPU_SH5)		:= clock-sh5.o
+
+obj-y			+= $(clock-y)
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/clock-sh5.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/clock-sh5.c
new file mode 100644
index 0000000..c48b93d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/clock-sh5.c
@@ -0,0 +1,79 @@
+/*
+ * arch/sh/kernel/cpu/sh5/clock-sh5.c
+ *
+ * SH-5 support for the clock framework
+ *
+ *  Copyright (C) 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/io.h>
+
+static int ifc_table[] = { 2, 4, 6, 8, 10, 12, 16, 24 };
+
+/* Clock, Power and Reset Controller */
+#define	CPRC_BLOCK_OFF	0x01010000
+#define CPRC_BASE	(PHYS_PERIPHERAL_BLOCK + CPRC_BLOCK_OFF)
+
+static unsigned long cprc_base;
+
+static void master_clk_init(struct clk *clk)
+{
+	int idx = (__raw_readl(cprc_base + 0x00) >> 6) & 0x0007;
+	clk->rate *= ifc_table[idx];
+}
+
+static struct sh_clk_ops sh5_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static unsigned long module_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(cprc_base) >> 12) & 0x0007;
+	return clk->parent->rate / ifc_table[idx];
+}
+
+static struct sh_clk_ops sh5_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static unsigned long bus_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(cprc_base) >> 3) & 0x0007;
+	return clk->parent->rate / ifc_table[idx];
+}
+
+static struct sh_clk_ops sh5_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static unsigned long cpu_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(cprc_base) & 0x0007);
+	return clk->parent->rate / ifc_table[idx];
+}
+
+static struct sh_clk_ops sh5_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct sh_clk_ops *sh5_clk_ops[] = {
+	&sh5_master_clk_ops,
+	&sh5_module_clk_ops,
+	&sh5_bus_clk_ops,
+	&sh5_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+	cprc_base = (unsigned long)ioremap_nocache(CPRC_BASE, 1024);
+	BUG_ON(!cprc_base);
+
+	if (idx < ARRAY_SIZE(sh5_clk_ops))
+		*ops = sh5_clk_ops[idx];
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/entry.S b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/entry.S
new file mode 100644
index 0000000..0c8d037
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/entry.S
@@ -0,0 +1,2003 @@
+/*
+ * arch/sh/kernel/cpu/sh5/entry.S
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2004 - 2008  Paul Mundt
+ * Copyright (C) 2003, 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/sys.h>
+#include <cpu/registers.h>
+#include <asm/processor.h>
+#include <asm/unistd.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * SR fields.
+ */
+#define SR_ASID_MASK	0x00ff0000
+#define SR_FD_MASK	0x00008000
+#define SR_SS		0x08000000
+#define SR_BL		0x10000000
+#define SR_MD		0x40000000
+
+/*
+ * Event code.
+ */
+#define	EVENT_INTERRUPT		0
+#define	EVENT_FAULT_TLB		1
+#define	EVENT_FAULT_NOT_TLB	2
+#define	EVENT_DEBUG		3
+
+/* EXPEVT values */
+#define	RESET_CAUSE		0x20
+#define DEBUGSS_CAUSE		0x980
+
+/*
+ * Frame layout. Quad index.
+ */
+#define	FRAME_T(x)	FRAME_TBASE+(x*8)
+#define	FRAME_R(x)	FRAME_RBASE+(x*8)
+#define	FRAME_S(x)	FRAME_SBASE+(x*8)
+#define FSPC		0
+#define FSSR		1
+#define FSYSCALL_ID	2
+
+/* Arrange the save frame to be a multiple of 32 bytes long */
+#define FRAME_SBASE	0
+#define FRAME_RBASE	(FRAME_SBASE+(3*8))	/* SYSCALL_ID - SSR - SPC */
+#define FRAME_TBASE	(FRAME_RBASE+(63*8))	/* r0 - r62 */
+#define FRAME_PBASE	(FRAME_TBASE+(8*8))	/* tr0 -tr7 */
+#define	FRAME_SIZE	(FRAME_PBASE+(2*8))	/* pad0-pad1 */
+
+#define FP_FRAME_SIZE	FP_FRAME_BASE+(33*8)	/* dr0 - dr31 + fpscr */
+#define FP_FRAME_BASE	0
+
+#define	SAVED_R2	0*8
+#define	SAVED_R3	1*8
+#define	SAVED_R4	2*8
+#define	SAVED_R5	3*8
+#define	SAVED_R18	4*8
+#define	SAVED_R6	5*8
+#define	SAVED_TR0	6*8
+
+/* These are the registers saved in the TLB path that aren't saved in the first
+   level of the normal one. */
+#define	TLB_SAVED_R25	7*8
+#define	TLB_SAVED_TR1	8*8
+#define	TLB_SAVED_TR2	9*8
+#define	TLB_SAVED_TR3	10*8
+#define	TLB_SAVED_TR4	11*8
+/* Save R0/R1 : PT-migrating compiler currently dishounours -ffixed-r0 and -ffixed-r1 causing
+   breakage otherwise. */
+#define	TLB_SAVED_R0	12*8
+#define	TLB_SAVED_R1	13*8
+
+#define CLI()				\
+	getcon	SR, r6;			\
+	ori	r6, 0xf0, r6;		\
+	putcon	r6, SR;
+
+#define STI()				\
+	getcon	SR, r6;			\
+	andi	r6, ~0xf0, r6;		\
+	putcon	r6, SR;
+
+#ifdef CONFIG_PREEMPT
+#  define preempt_stop()	CLI()
+#else
+#  define preempt_stop()
+#  define resume_kernel		restore_all
+#endif
+
+	.section	.data, "aw"
+
+#define FAST_TLBMISS_STACK_CACHELINES 4
+#define FAST_TLBMISS_STACK_QUADWORDS (4*FAST_TLBMISS_STACK_CACHELINES)
+
+/* Register back-up area for all exceptions */
+	.balign	32
+	/* Allow for 16 quadwords to be pushed by fast tlbmiss handling
+	 * register saves etc. */
+	.fill FAST_TLBMISS_STACK_QUADWORDS, 8, 0x0
+/* This is 32 byte aligned by construction */
+/* Register back-up area for all exceptions */
+reg_save_area:
+	.quad	0
+	.quad	0
+	.quad	0
+	.quad	0
+
+	.quad	0
+	.quad	0
+	.quad	0
+	.quad	0
+
+	.quad	0
+	.quad	0
+	.quad	0
+	.quad	0
+
+	.quad	0
+	.quad   0
+
+/* Save area for RESVEC exceptions. We cannot use reg_save_area because of
+ * reentrancy. Note this area may be accessed via physical address.
+ * Align so this fits a whole single cache line, for ease of purging.
+ */
+	.balign 32,0,32
+resvec_save_area:
+	.quad	0
+	.quad	0
+	.quad	0
+	.quad	0
+	.quad	0
+	.balign 32,0,32
+
+/* Jump table of 3rd level handlers  */
+trap_jtable:
+	.long	do_exception_error		/* 0x000 */
+	.long	do_exception_error		/* 0x020 */
+#ifdef CONFIG_MMU
+	.long	tlb_miss_load				/* 0x040 */
+	.long	tlb_miss_store				/* 0x060 */
+#else
+	.long	do_exception_error
+	.long	do_exception_error
+#endif
+	! ARTIFICIAL pseudo-EXPEVT setting
+	.long	do_debug_interrupt		/* 0x080 */
+#ifdef CONFIG_MMU
+	.long	tlb_miss_load				/* 0x0A0 */
+	.long	tlb_miss_store				/* 0x0C0 */
+#else
+	.long	do_exception_error
+	.long	do_exception_error
+#endif
+	.long	do_address_error_load	/* 0x0E0 */
+	.long	do_address_error_store	/* 0x100 */
+#ifdef CONFIG_SH_FPU
+	.long	do_fpu_error		/* 0x120 */
+#else
+	.long	do_exception_error		/* 0x120 */
+#endif
+	.long	do_exception_error		/* 0x140 */
+	.long	system_call				/* 0x160 */
+	.long	do_reserved_inst		/* 0x180 */
+	.long	do_illegal_slot_inst	/* 0x1A0 */
+	.long	do_exception_error		/* 0x1C0 - NMI */
+	.long	do_exception_error		/* 0x1E0 */
+	.rept 15
+		.long do_IRQ		/* 0x200 - 0x3C0 */
+	.endr
+	.long	do_exception_error		/* 0x3E0 */
+	.rept 32
+		.long do_IRQ		/* 0x400 - 0x7E0 */
+	.endr
+	.long	fpu_error_or_IRQA			/* 0x800 */
+	.long	fpu_error_or_IRQB			/* 0x820 */
+	.long	do_IRQ			/* 0x840 */
+	.long	do_IRQ			/* 0x860 */
+	.rept 6
+		.long do_exception_error	/* 0x880 - 0x920 */
+	.endr
+	.long	breakpoint_trap_handler	/* 0x940 */
+	.long	do_exception_error		/* 0x960 */
+	.long	do_single_step		/* 0x980 */
+
+	.rept 3
+		.long do_exception_error	/* 0x9A0 - 0x9E0 */
+	.endr
+	.long	do_IRQ			/* 0xA00 */
+	.long	do_IRQ			/* 0xA20 */
+#ifdef CONFIG_MMU
+	.long	itlb_miss_or_IRQ			/* 0xA40 */
+#else
+	.long	do_IRQ
+#endif
+	.long	do_IRQ			/* 0xA60 */
+	.long	do_IRQ			/* 0xA80 */
+#ifdef CONFIG_MMU
+	.long	itlb_miss_or_IRQ			/* 0xAA0 */
+#else
+	.long	do_IRQ
+#endif
+	.long	do_exception_error		/* 0xAC0 */
+	.long	do_address_error_exec	/* 0xAE0 */
+	.rept 8
+		.long do_exception_error	/* 0xB00 - 0xBE0 */
+	.endr
+	.rept 18
+		.long do_IRQ		/* 0xC00 - 0xE20 */
+	.endr
+
+	.section	.text64, "ax"
+
+/*
+ * --- Exception/Interrupt/Event Handling Section
+ */
+
+/*
+ * VBR and RESVEC blocks.
+ *
+ * First level handler for VBR-based exceptions.
+ *
+ * To avoid waste of space, align to the maximum text block size.
+ * This is assumed to be at most 128 bytes or 32 instructions.
+ * DO NOT EXCEED 32 instructions on the first level handlers !
+ *
+ * Also note that RESVEC is contained within the VBR block
+ * where the room left (1KB - TEXT_SIZE) allows placing
+ * the RESVEC block (at most 512B + TEXT_SIZE).
+ *
+ * So first (and only) level handler for RESVEC-based exceptions.
+ *
+ * Where the fault/interrupt is handled (not_a_tlb_miss, tlb_miss
+ * and interrupt) we are a lot tight with register space until
+ * saving onto the stack frame, which is done in handle_exception().
+ *
+ */
+
+#define	TEXT_SIZE 	128
+#define	BLOCK_SIZE 	1664 		/* Dynamic check, 13*128 */
+
+	.balign TEXT_SIZE
+LVBR_block:
+	.space	256, 0			/* Power-on class handler, */
+					/* not required here       */
+not_a_tlb_miss:
+	synco	/* TAKum03020 (but probably a good idea anyway.) */
+	/* Save original stack pointer into KCR1 */
+	putcon	SP, KCR1
+
+	/* Save other original registers into reg_save_area */
+        movi  reg_save_area, SP
+	st.q	SP, SAVED_R2, r2
+	st.q	SP, SAVED_R3, r3
+	st.q	SP, SAVED_R4, r4
+	st.q	SP, SAVED_R5, r5
+	st.q	SP, SAVED_R6, r6
+	st.q	SP, SAVED_R18, r18
+	gettr	tr0, r3
+	st.q	SP, SAVED_TR0, r3
+
+	/* Set args for Non-debug, Not a TLB miss class handler */
+	getcon	EXPEVT, r2
+	movi	ret_from_exception, r3
+	ori	r3, 1, r3
+	movi	EVENT_FAULT_NOT_TLB, r4
+	or	SP, ZERO, r5
+	getcon	KCR1, SP
+	pta	handle_exception, tr0
+	blink	tr0, ZERO
+
+	.balign 256
+	! VBR+0x200
+	nop
+	.balign 256
+	! VBR+0x300
+	nop
+	.balign 256
+	/*
+	 * Instead of the natural .balign 1024 place RESVEC here
+	 * respecting the final 1KB alignment.
+	 */
+	.balign TEXT_SIZE
+	/*
+	 * Instead of '.space 1024-TEXT_SIZE' place the RESVEC
+	 * block making sure the final alignment is correct.
+	 */
+#ifdef CONFIG_MMU
+tlb_miss:
+	synco	/* TAKum03020 (but probably a good idea anyway.) */
+	putcon	SP, KCR1
+	movi	reg_save_area, SP
+	/* SP is guaranteed 32-byte aligned. */
+	st.q	SP, TLB_SAVED_R0 , r0
+	st.q	SP, TLB_SAVED_R1 , r1
+	st.q	SP, SAVED_R2 , r2
+	st.q	SP, SAVED_R3 , r3
+	st.q	SP, SAVED_R4 , r4
+	st.q	SP, SAVED_R5 , r5
+	st.q	SP, SAVED_R6 , r6
+	st.q	SP, SAVED_R18, r18
+
+	/* Save R25 for safety; as/ld may want to use it to achieve the call to
+	 * the code in mm/tlbmiss.c */
+	st.q	SP, TLB_SAVED_R25, r25
+	gettr	tr0, r2
+	gettr	tr1, r3
+	gettr	tr2, r4
+	gettr	tr3, r5
+	gettr	tr4, r18
+	st.q	SP, SAVED_TR0 , r2
+	st.q	SP, TLB_SAVED_TR1 , r3
+	st.q	SP, TLB_SAVED_TR2 , r4
+	st.q	SP, TLB_SAVED_TR3 , r5
+	st.q	SP, TLB_SAVED_TR4 , r18
+
+	pt	do_fast_page_fault, tr0
+	getcon	SSR, r2
+	getcon	EXPEVT, r3
+	getcon	TEA, r4
+	shlri	r2, 30, r2
+	andi	r2, 1, r2	/* r2 = SSR.MD */
+	blink 	tr0, LINK
+
+	pt	fixup_to_invoke_general_handler, tr1
+
+	/* If the fast path handler fixed the fault, just drop through quickly
+	   to the restore code right away to return to the excepting context.
+	   */
+	bnei/u	r2, 0, tr1
+
+fast_tlb_miss_restore:
+	ld.q	SP, SAVED_TR0, r2
+	ld.q	SP, TLB_SAVED_TR1, r3
+	ld.q	SP, TLB_SAVED_TR2, r4
+
+	ld.q	SP, TLB_SAVED_TR3, r5
+	ld.q	SP, TLB_SAVED_TR4, r18
+
+	ptabs	r2, tr0
+	ptabs	r3, tr1
+	ptabs	r4, tr2
+	ptabs	r5, tr3
+	ptabs	r18, tr4
+
+	ld.q	SP, TLB_SAVED_R0, r0
+	ld.q	SP, TLB_SAVED_R1, r1
+	ld.q	SP, SAVED_R2, r2
+	ld.q	SP, SAVED_R3, r3
+	ld.q	SP, SAVED_R4, r4
+	ld.q	SP, SAVED_R5, r5
+	ld.q	SP, SAVED_R6, r6
+	ld.q	SP, SAVED_R18, r18
+	ld.q	SP, TLB_SAVED_R25, r25
+
+	getcon	KCR1, SP
+	rte
+	nop /* for safety, in case the code is run on sh5-101 cut1.x */
+
+fixup_to_invoke_general_handler:
+
+	/* OK, new method.  Restore stuff that's not expected to get saved into
+	   the 'first-level' reg save area, then just fall through to setting
+	   up the registers and calling the second-level handler. */
+
+	/* 2nd level expects r2,3,4,5,6,18,tr0 to be saved.  So we must restore
+	   r25,tr1-4 and save r6 to get into the right state.  */
+
+	ld.q	SP, TLB_SAVED_TR1, r3
+	ld.q	SP, TLB_SAVED_TR2, r4
+	ld.q	SP, TLB_SAVED_TR3, r5
+	ld.q	SP, TLB_SAVED_TR4, r18
+	ld.q	SP, TLB_SAVED_R25, r25
+
+	ld.q	SP, TLB_SAVED_R0, r0
+	ld.q	SP, TLB_SAVED_R1, r1
+
+	ptabs/u	r3, tr1
+	ptabs/u	r4, tr2
+	ptabs/u	r5, tr3
+	ptabs/u	r18, tr4
+
+	/* Set args for Non-debug, TLB miss class handler */
+	getcon	EXPEVT, r2
+	movi	ret_from_exception, r3
+	ori	r3, 1, r3
+	movi	EVENT_FAULT_TLB, r4
+	or	SP, ZERO, r5
+	getcon	KCR1, SP
+	pta	handle_exception, tr0
+	blink	tr0, ZERO
+#else /* CONFIG_MMU */
+	.balign 256
+#endif
+
+/* NB TAKE GREAT CARE HERE TO ENSURE THAT THE INTERRUPT CODE
+   DOES END UP AT VBR+0x600 */
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	.balign 256
+	/* VBR + 0x600 */
+
+interrupt:
+	synco	/* TAKum03020 (but probably a good idea anyway.) */
+	/* Save original stack pointer into KCR1 */
+	putcon	SP, KCR1
+
+	/* Save other original registers into reg_save_area */
+        movi  reg_save_area, SP
+	st.q	SP, SAVED_R2, r2
+	st.q	SP, SAVED_R3, r3
+	st.q	SP, SAVED_R4, r4
+	st.q	SP, SAVED_R5, r5
+	st.q	SP, SAVED_R6, r6
+	st.q	SP, SAVED_R18, r18
+	gettr	tr0, r3
+	st.q	SP, SAVED_TR0, r3
+
+	/* Set args for interrupt class handler */
+	getcon	INTEVT, r2
+	movi	ret_from_irq, r3
+	ori	r3, 1, r3
+	movi	EVENT_INTERRUPT, r4
+	or	SP, ZERO, r5
+	getcon	KCR1, SP
+	pta	handle_exception, tr0
+	blink	tr0, ZERO
+	.balign	TEXT_SIZE		/* let's waste the bare minimum */
+
+LVBR_block_end:				/* Marker. Used for total checking */
+
+	.balign 256
+LRESVEC_block:
+	/* Panic handler. Called with MMU off. Possible causes/actions:
+	 * - Reset:		Jump to program start.
+	 * - Single Step:	Turn off Single Step & return.
+	 * - Others:		Call panic handler, passing PC as arg.
+	 *			(this may need to be extended...)
+	 */
+reset_or_panic:
+	synco	/* TAKum03020 (but probably a good idea anyway.) */
+	putcon	SP, DCR
+	/* First save r0-1 and tr0, as we need to use these */
+	movi	resvec_save_area-CONFIG_PAGE_OFFSET, SP
+	st.q	SP, 0, r0
+	st.q	SP, 8, r1
+	gettr	tr0, r0
+	st.q	SP, 32, r0
+
+	/* Check cause */
+	getcon	EXPEVT, r0
+	movi	RESET_CAUSE, r1
+	sub	r1, r0, r1		/* r1=0 if reset */
+	movi	_stext-CONFIG_PAGE_OFFSET, r0
+	ori	r0, 1, r0
+	ptabs	r0, tr0
+	beqi	r1, 0, tr0		/* Jump to start address if reset */
+
+	getcon	EXPEVT, r0
+	movi	DEBUGSS_CAUSE, r1
+	sub	r1, r0, r1		/* r1=0 if single step */
+	pta	single_step_panic, tr0
+	beqi	r1, 0, tr0		/* jump if single step */
+
+	/* Now jump to where we save the registers. */
+	movi	panic_stash_regs-CONFIG_PAGE_OFFSET, r1
+	ptabs	r1, tr0
+	blink	tr0, r63
+
+single_step_panic:
+	/* We are in a handler with Single Step set. We need to resume the
+	 * handler, by turning on MMU & turning off Single Step. */
+	getcon	SSR, r0
+	movi	SR_MMU, r1
+	or	r0, r1, r0
+	movi	~SR_SS, r1
+	and	r0, r1, r0
+	putcon	r0, SSR
+	/* Restore EXPEVT, as the rte won't do this */
+	getcon	PEXPEVT, r0
+	putcon	r0, EXPEVT
+	/* Restore regs */
+	ld.q	SP, 32, r0
+	ptabs	r0, tr0
+	ld.q	SP, 0, r0
+	ld.q	SP, 8, r1
+	getcon	DCR, SP
+	synco
+	rte
+
+
+	.balign	256
+debug_exception:
+	synco	/* TAKum03020 (but probably a good idea anyway.) */
+	/*
+	 * Single step/software_break_point first level handler.
+	 * Called with MMU off, so the first thing we do is enable it
+	 * by doing an rte with appropriate SSR.
+	 */
+	putcon	SP, DCR
+	/* Save SSR & SPC, together with R0 & R1, as we need to use 2 regs. */
+	movi	resvec_save_area-CONFIG_PAGE_OFFSET, SP
+
+	/* With the MMU off, we are bypassing the cache, so purge any
+         * data that will be made stale by the following stores.
+         */
+	ocbp	SP, 0
+	synco
+
+	st.q	SP, 0, r0
+	st.q	SP, 8, r1
+	getcon	SPC, r0
+	st.q	SP, 16, r0
+	getcon	SSR, r0
+	st.q	SP, 24, r0
+
+	/* Enable MMU, block exceptions, set priv mode, disable single step */
+	movi	SR_MMU | SR_BL | SR_MD, r1
+	or	r0, r1, r0
+	movi	~SR_SS, r1
+	and	r0, r1, r0
+	putcon	r0, SSR
+	/* Force control to debug_exception_2 when rte is executed */
+	movi	debug_exeception_2, r0
+	ori	r0, 1, r0      /* force SHmedia, just in case */
+	putcon	r0, SPC
+	getcon	DCR, SP
+	synco
+	rte
+debug_exeception_2:
+	/* Restore saved regs */
+	putcon	SP, KCR1
+	movi	resvec_save_area, SP
+	ld.q	SP, 24, r0
+	putcon	r0, SSR
+	ld.q	SP, 16, r0
+	putcon	r0, SPC
+	ld.q	SP, 0, r0
+	ld.q	SP, 8, r1
+
+	/* Save other original registers into reg_save_area */
+        movi  reg_save_area, SP
+	st.q	SP, SAVED_R2, r2
+	st.q	SP, SAVED_R3, r3
+	st.q	SP, SAVED_R4, r4
+	st.q	SP, SAVED_R5, r5
+	st.q	SP, SAVED_R6, r6
+	st.q	SP, SAVED_R18, r18
+	gettr	tr0, r3
+	st.q	SP, SAVED_TR0, r3
+
+	/* Set args for debug class handler */
+	getcon	EXPEVT, r2
+	movi	ret_from_exception, r3
+	ori	r3, 1, r3
+	movi	EVENT_DEBUG, r4
+	or	SP, ZERO, r5
+	getcon	KCR1, SP
+	pta	handle_exception, tr0
+	blink	tr0, ZERO
+
+	.balign	256
+debug_interrupt:
+	/* !!! WE COME HERE IN REAL MODE !!! */
+	/* Hook-up debug interrupt to allow various debugging options to be
+	 * hooked into its handler. */
+	/* Save original stack pointer into KCR1 */
+	synco
+	putcon	SP, KCR1
+	movi	resvec_save_area-CONFIG_PAGE_OFFSET, SP
+	ocbp	SP, 0
+	ocbp	SP, 32
+	synco
+
+	/* Save other original registers into reg_save_area thru real addresses */
+	st.q	SP, SAVED_R2, r2
+	st.q	SP, SAVED_R3, r3
+	st.q	SP, SAVED_R4, r4
+	st.q	SP, SAVED_R5, r5
+	st.q	SP, SAVED_R6, r6
+	st.q	SP, SAVED_R18, r18
+	gettr	tr0, r3
+	st.q	SP, SAVED_TR0, r3
+
+	/* move (spc,ssr)->(pspc,pssr).  The rte will shift
+	   them back again, so that they look like the originals
+	   as far as the real handler code is concerned. */
+	getcon	spc, r6
+	putcon	r6, pspc
+	getcon	ssr, r6
+	putcon	r6, pssr
+
+	! construct useful SR for handle_exception
+	movi	3, r6
+	shlli	r6, 30, r6
+	getcon	sr, r18
+	or	r18, r6, r6
+	putcon	r6, ssr
+
+	! SSR is now the current SR with the MD and MMU bits set
+	! i.e. the rte will switch back to priv mode and put
+	! the mmu back on
+
+	! construct spc
+	movi	handle_exception, r18
+	ori	r18, 1, r18		! for safety (do we need this?)
+	putcon	r18, spc
+
+	/* Set args for Non-debug, Not a TLB miss class handler */
+
+	! EXPEVT==0x80 is unused, so 'steal' this value to put the
+	! debug interrupt handler in the vectoring table
+	movi	0x80, r2
+	movi	ret_from_exception, r3
+	ori	r3, 1, r3
+	movi	EVENT_FAULT_NOT_TLB, r4
+
+	or	SP, ZERO, r5
+	movi	CONFIG_PAGE_OFFSET, r6
+	add	r6, r5, r5
+	getcon	KCR1, SP
+
+	synco	! for safety
+	rte	! -> handle_exception, switch back to priv mode again
+
+LRESVEC_block_end:			/* Marker. Unused. */
+
+	.balign	TEXT_SIZE
+
+/*
+ * Second level handler for VBR-based exceptions. Pre-handler.
+ * In common to all stack-frame sensitive handlers.
+ *
+ * Inputs:
+ * (KCR0) Current [current task union]
+ * (KCR1) Original SP
+ * (r2)   INTEVT/EXPEVT
+ * (r3)   appropriate return address
+ * (r4)   Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault, 3=debug)
+ * (r5)   Pointer to reg_save_area
+ * (SP)   Original SP
+ *
+ * Available registers:
+ * (r6)
+ * (r18)
+ * (tr0)
+ *
+ */
+handle_exception:
+	/* Common 2nd level handler. */
+
+	/* First thing we need an appropriate stack pointer */
+	getcon	SSR, r6
+	shlri	r6, 30, r6
+	andi	r6, 1, r6
+	pta	stack_ok, tr0
+	bne	r6, ZERO, tr0		/* Original stack pointer is fine */
+
+	/* Set stack pointer for user fault */
+	getcon	KCR0, SP
+	movi	THREAD_SIZE, r6		/* Point to the end */
+	add	SP, r6, SP
+
+stack_ok:
+
+/* DEBUG : check for underflow/overflow of the kernel stack */
+	pta	no_underflow, tr0
+	getcon  KCR0, r6
+	movi	1024, r18
+	add	r6, r18, r6
+	bge	SP, r6, tr0 	! ? below 1k from bottom of stack : danger zone
+
+/* Just panic to cause a crash. */
+bad_sp:
+	ld.b	r63, 0, r6
+	nop
+
+no_underflow:
+	pta	bad_sp, tr0
+	getcon	kcr0, r6
+	movi	THREAD_SIZE, r18
+	add	r18, r6, r6
+	bgt	SP, r6, tr0	! sp above the stack
+
+	/* Make some room for the BASIC frame. */
+	movi	-(FRAME_SIZE), r6
+	add	SP, r6, SP
+
+/* Could do this with no stalling if we had another spare register, but the
+   code below will be OK. */
+	ld.q	r5, SAVED_R2, r6
+	ld.q	r5, SAVED_R3, r18
+	st.q	SP, FRAME_R(2), r6
+	ld.q	r5, SAVED_R4, r6
+	st.q	SP, FRAME_R(3), r18
+	ld.q	r5, SAVED_R5, r18
+	st.q	SP, FRAME_R(4), r6
+	ld.q	r5, SAVED_R6, r6
+	st.q	SP, FRAME_R(5), r18
+	ld.q	r5, SAVED_R18, r18
+	st.q	SP, FRAME_R(6), r6
+	ld.q	r5, SAVED_TR0, r6
+	st.q	SP, FRAME_R(18), r18
+	st.q	SP, FRAME_T(0), r6
+
+	/* Keep old SP around */
+	getcon	KCR1, r6
+
+	/* Save the rest of the general purpose registers */
+	st.q	SP, FRAME_R(0), r0
+	st.q	SP, FRAME_R(1), r1
+	st.q	SP, FRAME_R(7), r7
+	st.q	SP, FRAME_R(8), r8
+	st.q	SP, FRAME_R(9), r9
+	st.q	SP, FRAME_R(10), r10
+	st.q	SP, FRAME_R(11), r11
+	st.q	SP, FRAME_R(12), r12
+	st.q	SP, FRAME_R(13), r13
+	st.q	SP, FRAME_R(14), r14
+
+	/* SP is somewhere else */
+	st.q	SP, FRAME_R(15), r6
+
+	st.q	SP, FRAME_R(16), r16
+	st.q	SP, FRAME_R(17), r17
+	/* r18 is saved earlier. */
+	st.q	SP, FRAME_R(19), r19
+	st.q	SP, FRAME_R(20), r20
+	st.q	SP, FRAME_R(21), r21
+	st.q	SP, FRAME_R(22), r22
+	st.q	SP, FRAME_R(23), r23
+	st.q	SP, FRAME_R(24), r24
+	st.q	SP, FRAME_R(25), r25
+	st.q	SP, FRAME_R(26), r26
+	st.q	SP, FRAME_R(27), r27
+	st.q	SP, FRAME_R(28), r28
+	st.q	SP, FRAME_R(29), r29
+	st.q	SP, FRAME_R(30), r30
+	st.q	SP, FRAME_R(31), r31
+	st.q	SP, FRAME_R(32), r32
+	st.q	SP, FRAME_R(33), r33
+	st.q	SP, FRAME_R(34), r34
+	st.q	SP, FRAME_R(35), r35
+	st.q	SP, FRAME_R(36), r36
+	st.q	SP, FRAME_R(37), r37
+	st.q	SP, FRAME_R(38), r38
+	st.q	SP, FRAME_R(39), r39
+	st.q	SP, FRAME_R(40), r40
+	st.q	SP, FRAME_R(41), r41
+	st.q	SP, FRAME_R(42), r42
+	st.q	SP, FRAME_R(43), r43
+	st.q	SP, FRAME_R(44), r44
+	st.q	SP, FRAME_R(45), r45
+	st.q	SP, FRAME_R(46), r46
+	st.q	SP, FRAME_R(47), r47
+	st.q	SP, FRAME_R(48), r48
+	st.q	SP, FRAME_R(49), r49
+	st.q	SP, FRAME_R(50), r50
+	st.q	SP, FRAME_R(51), r51
+	st.q	SP, FRAME_R(52), r52
+	st.q	SP, FRAME_R(53), r53
+	st.q	SP, FRAME_R(54), r54
+	st.q	SP, FRAME_R(55), r55
+	st.q	SP, FRAME_R(56), r56
+	st.q	SP, FRAME_R(57), r57
+	st.q	SP, FRAME_R(58), r58
+	st.q	SP, FRAME_R(59), r59
+	st.q	SP, FRAME_R(60), r60
+	st.q	SP, FRAME_R(61), r61
+	st.q	SP, FRAME_R(62), r62
+
+	/*
+	 * Save the S* registers.
+	 */
+	getcon	SSR, r61
+	st.q	SP, FRAME_S(FSSR), r61
+	getcon	SPC, r62
+	st.q	SP, FRAME_S(FSPC), r62
+	movi	-1, r62			/* Reset syscall_nr */
+	st.q	SP, FRAME_S(FSYSCALL_ID), r62
+
+	/* Save the rest of the target registers */
+	gettr	tr1, r6
+	st.q	SP, FRAME_T(1), r6
+	gettr	tr2, r6
+	st.q	SP, FRAME_T(2), r6
+	gettr	tr3, r6
+	st.q	SP, FRAME_T(3), r6
+	gettr	tr4, r6
+	st.q	SP, FRAME_T(4), r6
+	gettr	tr5, r6
+	st.q	SP, FRAME_T(5), r6
+	gettr	tr6, r6
+	st.q	SP, FRAME_T(6), r6
+	gettr	tr7, r6
+	st.q	SP, FRAME_T(7), r6
+
+	! setup FP so that unwinder can wind back through nested kernel mode
+	! exceptions
+	add	SP, ZERO, r14
+
+	/* For syscall and debug race condition, get TRA now */
+	getcon	TRA, r5
+
+	/* We are in a safe position to turn SR.BL off, but set IMASK=0xf
+	 * Also set FD, to catch FPU usage in the kernel.
+	 *
+	 * benedict.gaster@superh.com 29/07/2002
+	 *
+	 * On all SH5-101 revisions it is unsafe to raise the IMASK and at the
+	 * same time change BL from 1->0, as any pending interrupt of a level
+	 * higher than he previous value of IMASK will leak through and be
+	 * taken unexpectedly.
+	 *
+	 * To avoid this we raise the IMASK and then issue another PUTCON to
+	 * enable interrupts.
+         */
+	getcon	SR, r6
+	movi	SR_IMASK | SR_FD, r7
+	or	r6, r7, r6
+	putcon	r6, SR
+	movi	SR_UNBLOCK_EXC, r7
+	and	r6, r7, r6
+	putcon	r6, SR
+
+
+	/* Now call the appropriate 3rd level handler */
+	or	r3, ZERO, LINK
+	movi	trap_jtable, r3
+	shlri	r2, 3, r2
+	ldx.l	r2, r3, r3
+	shlri	r2, 2, r2
+	ptabs	r3, tr0
+	or	SP, ZERO, r3
+	blink	tr0, ZERO
+
+/*
+ * Second level handler for VBR-based exceptions. Post-handlers.
+ *
+ * Post-handlers for interrupts (ret_from_irq), exceptions
+ * (ret_from_exception) and common reentrance doors (restore_all
+ * to get back to the original context, ret_from_syscall loop to
+ * check kernel exiting).
+ *
+ * ret_with_reschedule and work_notifysig are an inner lables of
+ * the ret_from_syscall loop.
+ *
+ * In common to all stack-frame sensitive handlers.
+ *
+ * Inputs:
+ * (SP)   struct pt_regs *, original register's frame pointer (basic)
+ *
+ */
+	.global ret_from_irq
+ret_from_irq:
+	ld.q	SP, FRAME_S(FSSR), r6
+	shlri	r6, 30, r6
+	andi	r6, 1, r6
+	pta	resume_kernel, tr0
+	bne	r6, ZERO, tr0		/* no further checks */
+	STI()
+	pta	ret_with_reschedule, tr0
+	blink	tr0, ZERO		/* Do not check softirqs */
+
+	.global ret_from_exception
+ret_from_exception:
+	preempt_stop()
+
+	ld.q	SP, FRAME_S(FSSR), r6
+	shlri	r6, 30, r6
+	andi	r6, 1, r6
+	pta	resume_kernel, tr0
+	bne	r6, ZERO, tr0		/* no further checks */
+
+	/* Check softirqs */
+
+#ifdef CONFIG_PREEMPT
+	pta   ret_from_syscall, tr0
+	blink   tr0, ZERO
+
+resume_kernel:
+	CLI()
+
+	pta	restore_all, tr0
+
+	getcon	KCR0, r6
+	ld.l	r6, TI_PRE_COUNT, r7
+	beq/u	r7, ZERO, tr0
+
+need_resched:
+	ld.l	r6, TI_FLAGS, r7
+	movi	(1 << TIF_NEED_RESCHED), r8
+	and	r8, r7, r8
+	bne	r8, ZERO, tr0
+
+	getcon	SR, r7
+	andi	r7, 0xf0, r7
+	bne	r7, ZERO, tr0
+
+	movi	preempt_schedule_irq, r7
+	ori	r7, 1, r7
+	ptabs	r7, tr1
+	blink	tr1, LINK
+
+	pta	need_resched, tr1
+	blink	tr1, ZERO
+#endif
+
+	.global ret_from_syscall
+ret_from_syscall:
+
+ret_with_reschedule:
+	getcon	KCR0, r6		! r6 contains current_thread_info
+	ld.l	r6, TI_FLAGS, r7	! r7 contains current_thread_info->flags
+
+	movi	_TIF_NEED_RESCHED, r8
+	and	r8, r7, r8
+	pta	work_resched, tr0
+	bne	r8, ZERO, tr0
+
+	pta	restore_all, tr1
+
+	movi	(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME), r8
+	and	r8, r7, r8
+	pta	work_notifysig, tr0
+	bne	r8, ZERO, tr0
+
+	blink	tr1, ZERO
+
+work_resched:
+	pta	ret_from_syscall, tr0
+	gettr	tr0, LINK
+	movi	schedule, r6
+	ptabs	r6, tr0
+	blink	tr0, ZERO		/* Call schedule(), return on top */
+
+work_notifysig:
+	gettr	tr1, LINK
+
+	movi	do_notify_resume, r6
+	ptabs	r6, tr0
+	or	SP, ZERO, r2
+	or	r7, ZERO, r3
+	blink	tr0, LINK	    /* Call do_notify_resume(regs, current_thread_info->flags), return here */
+
+restore_all:
+	/* Do prefetches */
+
+	ld.q	SP, FRAME_T(0), r6
+	ld.q	SP, FRAME_T(1), r7
+	ld.q	SP, FRAME_T(2), r8
+	ld.q	SP, FRAME_T(3), r9
+	ptabs	r6, tr0
+	ptabs	r7, tr1
+	ptabs	r8, tr2
+	ptabs	r9, tr3
+	ld.q	SP, FRAME_T(4), r6
+	ld.q	SP, FRAME_T(5), r7
+	ld.q	SP, FRAME_T(6), r8
+	ld.q	SP, FRAME_T(7), r9
+	ptabs	r6, tr4
+	ptabs	r7, tr5
+	ptabs	r8, tr6
+	ptabs	r9, tr7
+
+	ld.q	SP, FRAME_R(0), r0
+	ld.q	SP, FRAME_R(1), r1
+	ld.q	SP, FRAME_R(2), r2
+	ld.q	SP, FRAME_R(3), r3
+	ld.q	SP, FRAME_R(4), r4
+	ld.q	SP, FRAME_R(5), r5
+	ld.q	SP, FRAME_R(6), r6
+	ld.q	SP, FRAME_R(7), r7
+	ld.q	SP, FRAME_R(8), r8
+	ld.q	SP, FRAME_R(9), r9
+	ld.q	SP, FRAME_R(10), r10
+	ld.q	SP, FRAME_R(11), r11
+	ld.q	SP, FRAME_R(12), r12
+	ld.q	SP, FRAME_R(13), r13
+	ld.q	SP, FRAME_R(14), r14
+
+	ld.q	SP, FRAME_R(16), r16
+	ld.q	SP, FRAME_R(17), r17
+	ld.q	SP, FRAME_R(18), r18
+	ld.q	SP, FRAME_R(19), r19
+	ld.q	SP, FRAME_R(20), r20
+	ld.q	SP, FRAME_R(21), r21
+	ld.q	SP, FRAME_R(22), r22
+	ld.q	SP, FRAME_R(23), r23
+	ld.q	SP, FRAME_R(24), r24
+	ld.q	SP, FRAME_R(25), r25
+	ld.q	SP, FRAME_R(26), r26
+	ld.q	SP, FRAME_R(27), r27
+	ld.q	SP, FRAME_R(28), r28
+	ld.q	SP, FRAME_R(29), r29
+	ld.q	SP, FRAME_R(30), r30
+	ld.q	SP, FRAME_R(31), r31
+	ld.q	SP, FRAME_R(32), r32
+	ld.q	SP, FRAME_R(33), r33
+	ld.q	SP, FRAME_R(34), r34
+	ld.q	SP, FRAME_R(35), r35
+	ld.q	SP, FRAME_R(36), r36
+	ld.q	SP, FRAME_R(37), r37
+	ld.q	SP, FRAME_R(38), r38
+	ld.q	SP, FRAME_R(39), r39
+	ld.q	SP, FRAME_R(40), r40
+	ld.q	SP, FRAME_R(41), r41
+	ld.q	SP, FRAME_R(42), r42
+	ld.q	SP, FRAME_R(43), r43
+	ld.q	SP, FRAME_R(44), r44
+	ld.q	SP, FRAME_R(45), r45
+	ld.q	SP, FRAME_R(46), r46
+	ld.q	SP, FRAME_R(47), r47
+	ld.q	SP, FRAME_R(48), r48
+	ld.q	SP, FRAME_R(49), r49
+	ld.q	SP, FRAME_R(50), r50
+	ld.q	SP, FRAME_R(51), r51
+	ld.q	SP, FRAME_R(52), r52
+	ld.q	SP, FRAME_R(53), r53
+	ld.q	SP, FRAME_R(54), r54
+	ld.q	SP, FRAME_R(55), r55
+	ld.q	SP, FRAME_R(56), r56
+	ld.q	SP, FRAME_R(57), r57
+	ld.q	SP, FRAME_R(58), r58
+
+	getcon	SR, r59
+	movi	SR_BLOCK_EXC, r60
+	or	r59, r60, r59
+	putcon	r59, SR			/* SR.BL = 1, keep nesting out */
+	ld.q	SP, FRAME_S(FSSR), r61
+	ld.q	SP, FRAME_S(FSPC), r62
+	movi	SR_ASID_MASK, r60
+	and	r59, r60, r59
+	andc	r61, r60, r61		/* Clear out older ASID */
+	or	r59, r61, r61		/* Retain current ASID */
+	putcon	r61, SSR
+	putcon	r62, SPC
+
+	/* Ignore FSYSCALL_ID */
+
+	ld.q	SP, FRAME_R(59), r59
+	ld.q	SP, FRAME_R(60), r60
+	ld.q	SP, FRAME_R(61), r61
+	ld.q	SP, FRAME_R(62), r62
+
+	/* Last touch */
+	ld.q	SP, FRAME_R(15), SP
+	rte
+	nop
+
+/*
+ * Third level handlers for VBR-based exceptions. Adapting args to
+ * and/or deflecting to fourth level handlers.
+ *
+ * Fourth level handlers interface.
+ * Most are C-coded handlers directly pointed by the trap_jtable.
+ * (Third = Fourth level)
+ * Inputs:
+ * (r2)   fault/interrupt code, entry number (e.g. NMI = 14,
+ *	  IRL0-3 (0000) = 16, RTLBMISS = 2, SYSCALL = 11, etc ...)
+ * (r3)   struct pt_regs *, original register's frame pointer
+ * (r4)   Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault)
+ * (r5)   TRA control register (for syscall/debug benefit only)
+ * (LINK) return address
+ * (SP)   = r3
+ *
+ * Kernel TLB fault handlers will get a slightly different interface.
+ * (r2)   struct pt_regs *, original register's frame pointer
+ * (r3)   page fault error code (see asm/thread_info.h)
+ * (r4)   Effective Address of fault
+ * (LINK) return address
+ * (SP)   = r2
+ *
+ * fpu_error_or_IRQ? is a helper to deflect to the right cause.
+ *
+ */
+#ifdef CONFIG_MMU
+tlb_miss_load:
+	or	SP, ZERO, r2
+	or	ZERO, ZERO, r3		/* Read */
+	getcon	TEA, r4
+	pta	call_do_page_fault, tr0
+	beq	ZERO, ZERO, tr0
+
+tlb_miss_store:
+	or	SP, ZERO, r2
+	movi	FAULT_CODE_WRITE, r3		/* Write */
+	getcon	TEA, r4
+	pta	call_do_page_fault, tr0
+	beq	ZERO, ZERO, tr0
+
+itlb_miss_or_IRQ:
+	pta	its_IRQ, tr0
+	beqi/u	r4, EVENT_INTERRUPT, tr0
+
+	/* ITLB miss */
+	or	SP, ZERO, r2
+	movi	FAULT_CODE_ITLB, r3
+	getcon	TEA, r4
+	/* Fall through */
+
+call_do_page_fault:
+	movi	do_page_fault, r6
+        ptabs	r6, tr0
+        blink	tr0, ZERO
+#endif /* CONFIG_MMU */
+
+fpu_error_or_IRQA:
+	pta	its_IRQ, tr0
+	beqi/l	r4, EVENT_INTERRUPT, tr0
+#ifdef CONFIG_SH_FPU
+	movi	fpu_state_restore_trap_handler, r6
+#else
+	movi	do_exception_error, r6
+#endif
+	ptabs	r6, tr0
+	blink	tr0, ZERO
+
+fpu_error_or_IRQB:
+	pta	its_IRQ, tr0
+	beqi/l	r4, EVENT_INTERRUPT, tr0
+#ifdef CONFIG_SH_FPU
+	movi	fpu_state_restore_trap_handler, r6
+#else
+	movi	do_exception_error, r6
+#endif
+	ptabs	r6, tr0
+	blink	tr0, ZERO
+
+its_IRQ:
+	movi	do_IRQ, r6
+	ptabs	r6, tr0
+	blink	tr0, ZERO
+
+/*
+ * system_call/unknown_trap third level handler:
+ *
+ * Inputs:
+ * (r2)   fault/interrupt code, entry number (TRAP = 11)
+ * (r3)   struct pt_regs *, original register's frame pointer
+ * (r4)   Not used. Event (0=interrupt, 1=TLB miss fault, 2=Not TLB miss fault)
+ * (r5)   TRA Control Reg (0x00xyzzzz: x=1 SYSCALL, y = #args, z=nr)
+ * (SP)   = r3
+ * (LINK) return address: ret_from_exception
+ * (*r3)  Syscall parms: SC#, arg0, arg1, ..., arg5 in order (Saved r2/r7)
+ *
+ * Outputs:
+ * (*r3)  Syscall reply (Saved r2)
+ * (LINK) In case of syscall only it can be scrapped.
+ *        Common second level post handler will be ret_from_syscall.
+ *        Common (non-trace) exit point to that is syscall_ret (saving
+ *        result to r2). Common bad exit point is syscall_bad (returning
+ *        ENOSYS then saved to r2).
+ *
+ */
+
+unknown_trap:
+	/* Unknown Trap or User Trace */
+	movi	do_unknown_trapa, r6
+	ptabs	r6, tr0
+        ld.q    r3, FRAME_R(9), r2	/* r2 = #arg << 16 | syscall # */
+        andi    r2, 0x1ff, r2		/* r2 = syscall # */
+	blink	tr0, LINK
+
+	pta	syscall_ret, tr0
+	blink	tr0, ZERO
+
+        /* New syscall implementation*/
+system_call:
+	pta	unknown_trap, tr0
+        or      r5, ZERO, r4            /* TRA (=r5) -> r4 */
+        shlri   r4, 20, r4
+	bnei	r4, 1, tr0		/* unknown_trap if not 0x1yzzzz */
+
+        /* It's a system call */
+	st.q    r3, FRAME_S(FSYSCALL_ID), r5 	/* ID (0x1yzzzz) -> stack */
+	andi    r5, 0x1ff, r5			/* syscall # -> r5	  */
+
+	STI()
+
+	pta	syscall_allowed, tr0
+	movi	NR_syscalls - 1, r4	/* Last valid */
+	bgeu/l	r4, r5, tr0
+
+syscall_bad:
+	/* Return ENOSYS ! */
+	movi	-(ENOSYS), r2		/* Fall-through */
+
+	.global syscall_ret
+syscall_ret:
+	st.q	SP, FRAME_R(9), r2	/* Expecting SP back to BASIC frame */
+	ld.q	SP, FRAME_S(FSPC), r2
+	addi	r2, 4, r2		/* Move PC, being pre-execution event */
+	st.q	SP, FRAME_S(FSPC), r2
+	pta	ret_from_syscall, tr0
+	blink	tr0, ZERO
+
+
+/*  A different return path for ret_from_fork, because we now need
+ *  to call schedule_tail with the later kernels. Because prev is
+ *  loaded into r2 by switch_to() means we can just call it straight  away
+ */
+
+.global	ret_from_fork
+ret_from_fork:
+
+	movi	schedule_tail,r5
+	ori	r5, 1, r5
+	ptabs	r5, tr0
+	blink	tr0, LINK
+
+	ld.q	SP, FRAME_S(FSPC), r2
+	addi	r2, 4, r2		/* Move PC, being pre-execution event */
+	st.q	SP, FRAME_S(FSPC), r2
+	pta	ret_from_syscall, tr0
+	blink	tr0, ZERO
+
+.global	ret_from_kernel_thread
+ret_from_kernel_thread:
+
+	movi	schedule_tail,r5
+	ori	r5, 1, r5
+	ptabs	r5, tr0
+	blink	tr0, LINK
+
+	ld.q	SP, FRAME_R(2), r2
+	ld.q	SP, FRAME_R(3), r3
+	ptabs	r3, tr0
+	blink	tr0, LINK
+
+	ld.q	SP, FRAME_S(FSPC), r2
+	addi	r2, 4, r2		/* Move PC, being pre-execution event */
+	st.q	SP, FRAME_S(FSPC), r2
+	pta	ret_from_syscall, tr0
+	blink	tr0, ZERO
+
+syscall_allowed:
+	/* Use LINK to deflect the exit point, default is syscall_ret */
+	pta	syscall_ret, tr0
+	gettr	tr0, LINK
+	pta	syscall_notrace, tr0
+
+	getcon	KCR0, r2
+	ld.l	r2, TI_FLAGS, r4
+	movi	_TIF_WORK_SYSCALL_MASK, r6
+	and	r6, r4, r6
+	beq/l	r6, ZERO, tr0
+
+	/* Trace it by calling syscall_trace before and after */
+	movi	do_syscall_trace_enter, r4
+	or	SP, ZERO, r2
+	ptabs	r4, tr0
+	blink	tr0, LINK
+
+	/* Save the retval */
+	st.q	SP, FRAME_R(2), r2
+
+	/* Reload syscall number as r5 is trashed by do_syscall_trace_enter */
+	ld.q	SP, FRAME_S(FSYSCALL_ID), r5
+	andi	r5, 0x1ff, r5
+
+	pta	syscall_ret_trace, tr0
+	gettr	tr0, LINK
+
+syscall_notrace:
+	/* Now point to the appropriate 4th level syscall handler */
+	movi	sys_call_table, r4
+	shlli	r5, 2, r5
+	ldx.l	r4, r5, r5
+	ptabs	r5, tr0
+
+	/* Prepare original args */
+	ld.q	SP, FRAME_R(2), r2
+	ld.q	SP, FRAME_R(3), r3
+	ld.q	SP, FRAME_R(4), r4
+	ld.q	SP, FRAME_R(5), r5
+	ld.q	SP, FRAME_R(6), r6
+	ld.q	SP, FRAME_R(7), r7
+
+	/* And now the trick for those syscalls requiring regs * ! */
+	or	SP, ZERO, r8
+
+	/* Call it */
+	blink	tr0, ZERO	/* LINK is already properly set */
+
+syscall_ret_trace:
+	/* We get back here only if under trace */
+	st.q	SP, FRAME_R(9), r2	/* Save return value */
+
+	movi	do_syscall_trace_leave, LINK
+	or	SP, ZERO, r2
+	ptabs	LINK, tr0
+	blink	tr0, LINK
+
+	/* This needs to be done after any syscall tracing */
+	ld.q	SP, FRAME_S(FSPC), r2
+	addi	r2, 4, r2	/* Move PC, being pre-execution event */
+	st.q	SP, FRAME_S(FSPC), r2
+
+	pta	ret_from_syscall, tr0
+	blink	tr0, ZERO		/* Resume normal return sequence */
+
+/*
+ * --- Switch to running under a particular ASID and return the previous ASID value
+ * --- The caller is assumed to have done a cli before calling this.
+ *
+ * Input r2 : new ASID
+ * Output r2 : old ASID
+ */
+
+	.global switch_and_save_asid
+switch_and_save_asid:
+	getcon	sr, r0
+	movi	255, r4
+	shlli 	r4, 16, r4	/* r4 = mask to select ASID */
+	and	r0, r4, r3	/* r3 = shifted old ASID */
+	andi	r2, 255, r2	/* mask down new ASID */
+	shlli	r2, 16, r2	/* align new ASID against SR.ASID */
+	andc	r0, r4, r0	/* efface old ASID from SR */
+	or	r0, r2, r0	/* insert the new ASID */
+	putcon	r0, ssr
+	movi	1f, r0
+	putcon	r0, spc
+	rte
+	nop
+1:
+	ptabs	LINK, tr0
+	shlri	r3, 16, r2	/* r2 = old ASID */
+	blink tr0, r63
+
+	.global	route_to_panic_handler
+route_to_panic_handler:
+	/* Switch to real mode, goto panic_handler, don't return.  Useful for
+	   last-chance debugging, e.g. if no output wants to go to the console.
+	   */
+
+	movi	panic_handler - CONFIG_PAGE_OFFSET, r1
+	ptabs	r1, tr0
+	pta	1f, tr1
+	gettr	tr1, r0
+	putcon	r0, spc
+	getcon	sr, r0
+	movi	1, r1
+	shlli	r1, 31, r1
+	andc	r0, r1, r0
+	putcon	r0, ssr
+	rte
+	nop
+1:	/* Now in real mode */
+	blink tr0, r63
+	nop
+
+	.global peek_real_address_q
+peek_real_address_q:
+	/* Two args:
+	   r2 : real mode address to peek
+	   r2(out) : result quadword
+
+	   This is provided as a cheapskate way of manipulating device
+	   registers for debugging (to avoid the need to ioremap the debug
+	   module, and to avoid the need to ioremap the watchpoint
+	   controller in a way that identity maps sufficient bits to avoid the
+	   SH5-101 cut2 silicon defect).
+
+	   This code is not performance critical
+	*/
+
+	add.l	r2, r63, r2	/* sign extend address */
+	getcon	sr, r0		/* r0 = saved original SR */
+	movi	1, r1
+	shlli	r1, 28, r1
+	or	r0, r1, r1	/* r0 with block bit set */
+	putcon	r1, sr		/* now in critical section */
+	movi	1, r36
+	shlli	r36, 31, r36
+	andc	r1, r36, r1	/* turn sr.mmu off in real mode section */
+
+	putcon	r1, ssr
+	movi	.peek0 - CONFIG_PAGE_OFFSET, r36 /* real mode target address */
+	movi	1f, r37		/* virtual mode return addr */
+	putcon	r36, spc
+
+	synco
+	rte
+	nop
+
+.peek0:	/* come here in real mode, don't touch caches!!
+           still in critical section (sr.bl==1) */
+	putcon	r0, ssr
+	putcon	r37, spc
+	/* Here's the actual peek.  If the address is bad, all bets are now off
+	 * what will happen (handlers invoked in real-mode = bad news) */
+	ld.q	r2, 0, r2
+	synco
+	rte	/* Back to virtual mode */
+	nop
+
+1:
+	ptabs	LINK, tr0
+	blink	tr0, r63
+
+	.global poke_real_address_q
+poke_real_address_q:
+	/* Two args:
+	   r2 : real mode address to poke
+	   r3 : quadword value to write.
+
+	   This is provided as a cheapskate way of manipulating device
+	   registers for debugging (to avoid the need to ioremap the debug
+	   module, and to avoid the need to ioremap the watchpoint
+	   controller in a way that identity maps sufficient bits to avoid the
+	   SH5-101 cut2 silicon defect).
+
+	   This code is not performance critical
+	*/
+
+	add.l	r2, r63, r2	/* sign extend address */
+	getcon	sr, r0		/* r0 = saved original SR */
+	movi	1, r1
+	shlli	r1, 28, r1
+	or	r0, r1, r1	/* r0 with block bit set */
+	putcon	r1, sr		/* now in critical section */
+	movi	1, r36
+	shlli	r36, 31, r36
+	andc	r1, r36, r1	/* turn sr.mmu off in real mode section */
+
+	putcon	r1, ssr
+	movi	.poke0-CONFIG_PAGE_OFFSET, r36 /* real mode target address */
+	movi	1f, r37		/* virtual mode return addr */
+	putcon	r36, spc
+
+	synco
+	rte
+	nop
+
+.poke0:	/* come here in real mode, don't touch caches!!
+           still in critical section (sr.bl==1) */
+	putcon	r0, ssr
+	putcon	r37, spc
+	/* Here's the actual poke.  If the address is bad, all bets are now off
+	 * what will happen (handlers invoked in real-mode = bad news) */
+	st.q	r2, 0, r3
+	synco
+	rte	/* Back to virtual mode */
+	nop
+
+1:
+	ptabs	LINK, tr0
+	blink	tr0, r63
+
+#ifdef CONFIG_MMU
+/*
+ * --- User Access Handling Section
+ */
+
+/*
+ * User Access support. It all moved to non inlined Assembler
+ * functions in here.
+ *
+ * __kernel_size_t __copy_user(void *__to, const void *__from,
+ *			       __kernel_size_t __n)
+ *
+ * Inputs:
+ * (r2)  target address
+ * (r3)  source address
+ * (r4)  size in bytes
+ *
+ * Ouputs:
+ * (*r2) target data
+ * (r2)  non-copied bytes
+ *
+ * If a fault occurs on the user pointer, bail out early and return the
+ * number of bytes not copied in r2.
+ * Strategy : for large blocks, call a real memcpy function which can
+ * move >1 byte at a time using unaligned ld/st instructions, and can
+ * manipulate the cache using prefetch + alloco to improve the speed
+ * further.  If a fault occurs in that function, just revert to the
+ * byte-by-byte approach used for small blocks; this is rare so the
+ * performance hit for that case does not matter.
+ *
+ * For small blocks it's not worth the overhead of setting up and calling
+ * the memcpy routine; do the copy a byte at a time.
+ *
+ */
+	.global	__copy_user
+__copy_user:
+	pta	__copy_user_byte_by_byte, tr1
+	movi	16, r0 ! this value is a best guess, should tune it by benchmarking
+	bge/u	r0, r4, tr1
+	pta copy_user_memcpy, tr0
+	addi	SP, -32, SP
+	/* Save arguments in case we have to fix-up unhandled page fault */
+	st.q	SP, 0, r2
+	st.q	SP, 8, r3
+	st.q	SP, 16, r4
+	st.q	SP, 24, r35 ! r35 is callee-save
+	/* Save LINK in a register to reduce RTS time later (otherwise
+	   ld SP,*,LINK;ptabs LINK;trn;blink trn,r63 becomes a critical path) */
+	ori	LINK, 0, r35
+	blink	tr0, LINK
+
+	/* Copy completed normally if we get back here */
+	ptabs	r35, tr0
+	ld.q	SP, 24, r35
+	/* don't restore r2-r4, pointless */
+	/* set result=r2 to zero as the copy must have succeeded. */
+	or	r63, r63, r2
+	addi	SP, 32, SP
+	blink	tr0, r63 ! RTS
+
+	.global __copy_user_fixup
+__copy_user_fixup:
+	/* Restore stack frame */
+	ori	r35, 0, LINK
+	ld.q	SP, 24, r35
+	ld.q	SP, 16, r4
+	ld.q	SP,  8, r3
+	ld.q	SP,  0, r2
+	addi	SP, 32, SP
+	/* Fall through to original code, in the 'same' state we entered with */
+
+/* The slow byte-by-byte method is used if the fast copy traps due to a bad
+   user address.  In that rare case, the speed drop can be tolerated. */
+__copy_user_byte_by_byte:
+	pta	___copy_user_exit, tr1
+	pta	___copy_user1, tr0
+	beq/u	r4, r63, tr1	/* early exit for zero length copy */
+	sub	r2, r3, r0
+	addi	r0, -1, r0
+
+___copy_user1:
+	ld.b	r3, 0, r5		/* Fault address 1 */
+
+	/* Could rewrite this to use just 1 add, but the second comes 'free'
+	   due to load latency */
+	addi	r3, 1, r3
+	addi	r4, -1, r4		/* No real fixup required */
+___copy_user2:
+	stx.b	r3, r0, r5		/* Fault address 2 */
+	bne     r4, ZERO, tr0
+
+___copy_user_exit:
+	or	r4, ZERO, r2
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+/*
+ * __kernel_size_t __clear_user(void *addr, __kernel_size_t size)
+ *
+ * Inputs:
+ * (r2)  target address
+ * (r3)  size in bytes
+ *
+ * Ouputs:
+ * (*r2) zero-ed target data
+ * (r2)  non-zero-ed bytes
+ */
+	.global	__clear_user
+__clear_user:
+	pta	___clear_user_exit, tr1
+	pta	___clear_user1, tr0
+	beq/u	r3, r63, tr1
+
+___clear_user1:
+	st.b	r2, 0, ZERO		/* Fault address */
+	addi	r2, 1, r2
+	addi	r3, -1, r3		/* No real fixup required */
+	bne     r3, ZERO, tr0
+
+___clear_user_exit:
+	or	r3, ZERO, r2
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+#endif /* CONFIG_MMU */
+
+/*
+ * extern long __get_user_asm_?(void *val, long addr)
+ *
+ * Inputs:
+ * (r2)  dest address
+ * (r3)  source address (in User Space)
+ *
+ * Ouputs:
+ * (r2)  -EFAULT (faulting)
+ *       0 	 (not faulting)
+ */
+	.global	__get_user_asm_b
+__get_user_asm_b:
+	or	r2, ZERO, r4
+	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
+
+___get_user_asm_b1:
+	ld.b	r3, 0, r5		/* r5 = data */
+	st.b	r4, 0, r5
+	or	ZERO, ZERO, r2
+
+___get_user_asm_b_exit:
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+
+	.global	__get_user_asm_w
+__get_user_asm_w:
+	or	r2, ZERO, r4
+	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
+
+___get_user_asm_w1:
+	ld.w	r3, 0, r5		/* r5 = data */
+	st.w	r4, 0, r5
+	or	ZERO, ZERO, r2
+
+___get_user_asm_w_exit:
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+
+	.global	__get_user_asm_l
+__get_user_asm_l:
+	or	r2, ZERO, r4
+	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
+
+___get_user_asm_l1:
+	ld.l	r3, 0, r5		/* r5 = data */
+	st.l	r4, 0, r5
+	or	ZERO, ZERO, r2
+
+___get_user_asm_l_exit:
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+
+	.global	__get_user_asm_q
+__get_user_asm_q:
+	or	r2, ZERO, r4
+	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
+
+___get_user_asm_q1:
+	ld.q	r3, 0, r5		/* r5 = data */
+	st.q	r4, 0, r5
+	or	ZERO, ZERO, r2
+
+___get_user_asm_q_exit:
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+/*
+ * extern long __put_user_asm_?(void *pval, long addr)
+ *
+ * Inputs:
+ * (r2)  kernel pointer to value
+ * (r3)  dest address (in User Space)
+ *
+ * Ouputs:
+ * (r2)  -EFAULT (faulting)
+ *       0 	 (not faulting)
+ */
+	.global	__put_user_asm_b
+__put_user_asm_b:
+	ld.b	r2, 0, r4		/* r4 = data */
+	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
+
+___put_user_asm_b1:
+	st.b	r3, 0, r4
+	or	ZERO, ZERO, r2
+
+___put_user_asm_b_exit:
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+
+	.global	__put_user_asm_w
+__put_user_asm_w:
+	ld.w	r2, 0, r4		/* r4 = data */
+	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
+
+___put_user_asm_w1:
+	st.w	r3, 0, r4
+	or	ZERO, ZERO, r2
+
+___put_user_asm_w_exit:
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+
+	.global	__put_user_asm_l
+__put_user_asm_l:
+	ld.l	r2, 0, r4		/* r4 = data */
+	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
+
+___put_user_asm_l1:
+	st.l	r3, 0, r4
+	or	ZERO, ZERO, r2
+
+___put_user_asm_l_exit:
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+
+	.global	__put_user_asm_q
+__put_user_asm_q:
+	ld.q	r2, 0, r4		/* r4 = data */
+	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
+
+___put_user_asm_q1:
+	st.q	r3, 0, r4
+	or	ZERO, ZERO, r2
+
+___put_user_asm_q_exit:
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+panic_stash_regs:
+	/* The idea is : when we get an unhandled panic, we dump the registers
+	   to a known memory location, the just sit in a tight loop.
+	   This allows the human to look at the memory region through the GDB
+	   session (assuming the debug module's SHwy initiator isn't locked up
+	   or anything), to hopefully analyze the cause of the panic. */
+
+	/* On entry, former r15 (SP) is in DCR
+	   former r0  is at resvec_saved_area + 0
+	   former r1  is at resvec_saved_area + 8
+	   former tr0 is at resvec_saved_area + 32
+	   DCR is the only register whose value is lost altogether.
+	*/
+
+	movi	0xffffffff80000000, r0 ! phy of dump area
+	ld.q	SP, 0x000, r1	! former r0
+	st.q	r0,  0x000, r1
+	ld.q	SP, 0x008, r1	! former r1
+	st.q	r0,  0x008, r1
+	st.q	r0,  0x010, r2
+	st.q	r0,  0x018, r3
+	st.q	r0,  0x020, r4
+	st.q	r0,  0x028, r5
+	st.q	r0,  0x030, r6
+	st.q	r0,  0x038, r7
+	st.q	r0,  0x040, r8
+	st.q	r0,  0x048, r9
+	st.q	r0,  0x050, r10
+	st.q	r0,  0x058, r11
+	st.q	r0,  0x060, r12
+	st.q	r0,  0x068, r13
+	st.q	r0,  0x070, r14
+	getcon	dcr, r14
+	st.q	r0,  0x078, r14
+	st.q	r0,  0x080, r16
+	st.q	r0,  0x088, r17
+	st.q	r0,  0x090, r18
+	st.q	r0,  0x098, r19
+	st.q	r0,  0x0a0, r20
+	st.q	r0,  0x0a8, r21
+	st.q	r0,  0x0b0, r22
+	st.q	r0,  0x0b8, r23
+	st.q	r0,  0x0c0, r24
+	st.q	r0,  0x0c8, r25
+	st.q	r0,  0x0d0, r26
+	st.q	r0,  0x0d8, r27
+	st.q	r0,  0x0e0, r28
+	st.q	r0,  0x0e8, r29
+	st.q	r0,  0x0f0, r30
+	st.q	r0,  0x0f8, r31
+	st.q	r0,  0x100, r32
+	st.q	r0,  0x108, r33
+	st.q	r0,  0x110, r34
+	st.q	r0,  0x118, r35
+	st.q	r0,  0x120, r36
+	st.q	r0,  0x128, r37
+	st.q	r0,  0x130, r38
+	st.q	r0,  0x138, r39
+	st.q	r0,  0x140, r40
+	st.q	r0,  0x148, r41
+	st.q	r0,  0x150, r42
+	st.q	r0,  0x158, r43
+	st.q	r0,  0x160, r44
+	st.q	r0,  0x168, r45
+	st.q	r0,  0x170, r46
+	st.q	r0,  0x178, r47
+	st.q	r0,  0x180, r48
+	st.q	r0,  0x188, r49
+	st.q	r0,  0x190, r50
+	st.q	r0,  0x198, r51
+	st.q	r0,  0x1a0, r52
+	st.q	r0,  0x1a8, r53
+	st.q	r0,  0x1b0, r54
+	st.q	r0,  0x1b8, r55
+	st.q	r0,  0x1c0, r56
+	st.q	r0,  0x1c8, r57
+	st.q	r0,  0x1d0, r58
+	st.q	r0,  0x1d8, r59
+	st.q	r0,  0x1e0, r60
+	st.q	r0,  0x1e8, r61
+	st.q	r0,  0x1f0, r62
+	st.q	r0,  0x1f8, r63	! bogus, but for consistency's sake...
+
+	ld.q	SP, 0x020, r1  ! former tr0
+	st.q	r0,  0x200, r1
+	gettr	tr1, r1
+	st.q	r0,  0x208, r1
+	gettr	tr2, r1
+	st.q	r0,  0x210, r1
+	gettr	tr3, r1
+	st.q	r0,  0x218, r1
+	gettr	tr4, r1
+	st.q	r0,  0x220, r1
+	gettr	tr5, r1
+	st.q	r0,  0x228, r1
+	gettr	tr6, r1
+	st.q	r0,  0x230, r1
+	gettr	tr7, r1
+	st.q	r0,  0x238, r1
+
+	getcon	sr,  r1
+	getcon	ssr,  r2
+	getcon	pssr,  r3
+	getcon	spc,  r4
+	getcon	pspc,  r5
+	getcon	intevt,  r6
+	getcon	expevt,  r7
+	getcon	pexpevt,  r8
+	getcon	tra,  r9
+	getcon	tea,  r10
+	getcon	kcr0, r11
+	getcon	kcr1, r12
+	getcon	vbr,  r13
+	getcon	resvec,  r14
+
+	st.q	r0,  0x240, r1
+	st.q	r0,  0x248, r2
+	st.q	r0,  0x250, r3
+	st.q	r0,  0x258, r4
+	st.q	r0,  0x260, r5
+	st.q	r0,  0x268, r6
+	st.q	r0,  0x270, r7
+	st.q	r0,  0x278, r8
+	st.q	r0,  0x280, r9
+	st.q	r0,  0x288, r10
+	st.q	r0,  0x290, r11
+	st.q	r0,  0x298, r12
+	st.q	r0,  0x2a0, r13
+	st.q	r0,  0x2a8, r14
+
+	getcon	SPC,r2
+	getcon	SSR,r3
+	getcon	EXPEVT,r4
+	/* Prepare to jump to C - physical address */
+	movi	panic_handler-CONFIG_PAGE_OFFSET, r1
+	ori	r1, 1, r1
+	ptabs   r1, tr0
+	getcon	DCR, SP
+	blink	tr0, ZERO
+	nop
+	nop
+	nop
+	nop
+
+
+
+
+/*
+ * --- Signal Handling Section
+ */
+
+/*
+ * extern long long _sa_default_rt_restorer
+ * extern long long _sa_default_restorer
+ *
+ *		 or, better,
+ *
+ * extern void _sa_default_rt_restorer(void)
+ * extern void _sa_default_restorer(void)
+ *
+ * Code prototypes to do a sys_rt_sigreturn() or sys_sysreturn()
+ * from user space. Copied into user space by signal management.
+ * Both must be quad aligned and 2 quad long (4 instructions).
+ *
+ */
+	.balign 8
+	.global sa_default_rt_restorer
+sa_default_rt_restorer:
+	movi	0x10, r9
+	shori	__NR_rt_sigreturn, r9
+	trapa	r9
+	nop
+
+	.balign 8
+	.global sa_default_restorer
+sa_default_restorer:
+	movi	0x10, r9
+	shori	__NR_sigreturn, r9
+	trapa	r9
+	nop
+
+/*
+ * --- __ex_table Section
+ */
+
+/*
+ * User Access Exception Table.
+ */
+	.section	__ex_table,  "a"
+
+	.global asm_uaccess_start	/* Just a marker */
+asm_uaccess_start:
+
+#ifdef CONFIG_MMU
+	.long	___copy_user1, ___copy_user_exit
+	.long	___copy_user2, ___copy_user_exit
+	.long	___clear_user1, ___clear_user_exit
+#endif
+	.long	___get_user_asm_b1, ___get_user_asm_b_exit
+	.long	___get_user_asm_w1, ___get_user_asm_w_exit
+	.long	___get_user_asm_l1, ___get_user_asm_l_exit
+	.long	___get_user_asm_q1, ___get_user_asm_q_exit
+	.long	___put_user_asm_b1, ___put_user_asm_b_exit
+	.long	___put_user_asm_w1, ___put_user_asm_w_exit
+	.long	___put_user_asm_l1, ___put_user_asm_l_exit
+	.long	___put_user_asm_q1, ___put_user_asm_q_exit
+
+	.global asm_uaccess_end		/* Just a marker */
+asm_uaccess_end:
+
+
+
+
+/*
+ * --- .init.text Section
+ */
+
+	__INIT
+
+/*
+ * void trap_init (void)
+ *
+ */
+	.global	trap_init
+trap_init:
+	addi	SP, -24, SP			/* Room to save r28/r29/r30 */
+	st.q	SP, 0, r28
+	st.q	SP, 8, r29
+	st.q	SP, 16, r30
+
+	/* Set VBR and RESVEC */
+	movi	LVBR_block, r19
+	andi	r19, -4, r19			/* reset MMUOFF + reserved */
+	/* For RESVEC exceptions we force the MMU off, which means we need the
+	   physical address. */
+	movi	LRESVEC_block-CONFIG_PAGE_OFFSET, r20
+	andi	r20, -4, r20			/* reset reserved */
+	ori	r20, 1, r20			/* set MMUOFF */
+	putcon	r19, VBR
+	putcon	r20, RESVEC
+
+	/* Sanity check */
+	movi	LVBR_block_end, r21
+	andi	r21, -4, r21
+	movi	BLOCK_SIZE, r29			/* r29 = expected size */
+	or	r19, ZERO, r30
+	add	r19, r29, r19
+
+	/*
+	 * Ugly, but better loop forever now than crash afterwards.
+	 * We should print a message, but if we touch LVBR or
+	 * LRESVEC blocks we should not be surprised if we get stuck
+	 * in trap_init().
+	 */
+	pta	trap_init_loop, tr1
+	gettr	tr1, r28			/* r28 = trap_init_loop */
+	sub	r21, r30, r30			/* r30 = actual size */
+
+	/*
+	 * VBR/RESVEC handlers overlap by being bigger than
+	 * allowed. Very bad. Just loop forever.
+	 * (r28) panic/loop address
+	 * (r29) expected size
+	 * (r30) actual size
+	 */
+trap_init_loop:
+	bne	r19, r21, tr1
+
+	/* Now that exception vectors are set up reset SR.BL */
+	getcon 	SR, r22
+	movi	SR_UNBLOCK_EXC, r23
+	and	r22, r23, r22
+	putcon	r22, SR
+
+	addi	SP, 24, SP
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/fpu.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/fpu.c
new file mode 100644
index 0000000..9f8713a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/fpu.c
@@ -0,0 +1,111 @@
+/*
+ * arch/sh/kernel/cpu/sh5/fpu.c
+ *
+ * Copyright (C) 2001  Manuela Cirronis, Paolo Alberelli
+ * Copyright (C) 2002  STMicroelectronics Limited
+ *   Author : Stuart Menefy
+ *
+ * Started from SH4 version:
+ *   Copyright (C) 1999, 2000  Kaz Kojima & Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <asm/processor.h>
+
+void save_fpu(struct task_struct *tsk)
+{
+	asm volatile("fst.p     %0, (0*8), fp0\n\t"
+		     "fst.p     %0, (1*8), fp2\n\t"
+		     "fst.p     %0, (2*8), fp4\n\t"
+		     "fst.p     %0, (3*8), fp6\n\t"
+		     "fst.p     %0, (4*8), fp8\n\t"
+		     "fst.p     %0, (5*8), fp10\n\t"
+		     "fst.p     %0, (6*8), fp12\n\t"
+		     "fst.p     %0, (7*8), fp14\n\t"
+		     "fst.p     %0, (8*8), fp16\n\t"
+		     "fst.p     %0, (9*8), fp18\n\t"
+		     "fst.p     %0, (10*8), fp20\n\t"
+		     "fst.p     %0, (11*8), fp22\n\t"
+		     "fst.p     %0, (12*8), fp24\n\t"
+		     "fst.p     %0, (13*8), fp26\n\t"
+		     "fst.p     %0, (14*8), fp28\n\t"
+		     "fst.p     %0, (15*8), fp30\n\t"
+		     "fst.p     %0, (16*8), fp32\n\t"
+		     "fst.p     %0, (17*8), fp34\n\t"
+		     "fst.p     %0, (18*8), fp36\n\t"
+		     "fst.p     %0, (19*8), fp38\n\t"
+		     "fst.p     %0, (20*8), fp40\n\t"
+		     "fst.p     %0, (21*8), fp42\n\t"
+		     "fst.p     %0, (22*8), fp44\n\t"
+		     "fst.p     %0, (23*8), fp46\n\t"
+		     "fst.p     %0, (24*8), fp48\n\t"
+		     "fst.p     %0, (25*8), fp50\n\t"
+		     "fst.p     %0, (26*8), fp52\n\t"
+		     "fst.p     %0, (27*8), fp54\n\t"
+		     "fst.p     %0, (28*8), fp56\n\t"
+		     "fst.p     %0, (29*8), fp58\n\t"
+		     "fst.p     %0, (30*8), fp60\n\t"
+		     "fst.p     %0, (31*8), fp62\n\t"
+
+		     "fgetscr   fr63\n\t"
+		     "fst.s     %0, (32*8), fr63\n\t"
+		: /* no output */
+		: "r" (&tsk->thread.xstate->hardfpu)
+		: "memory");
+}
+
+void restore_fpu(struct task_struct *tsk)
+{
+	asm volatile("fld.p     %0, (0*8), fp0\n\t"
+		     "fld.p     %0, (1*8), fp2\n\t"
+		     "fld.p     %0, (2*8), fp4\n\t"
+		     "fld.p     %0, (3*8), fp6\n\t"
+		     "fld.p     %0, (4*8), fp8\n\t"
+		     "fld.p     %0, (5*8), fp10\n\t"
+		     "fld.p     %0, (6*8), fp12\n\t"
+		     "fld.p     %0, (7*8), fp14\n\t"
+		     "fld.p     %0, (8*8), fp16\n\t"
+		     "fld.p     %0, (9*8), fp18\n\t"
+		     "fld.p     %0, (10*8), fp20\n\t"
+		     "fld.p     %0, (11*8), fp22\n\t"
+		     "fld.p     %0, (12*8), fp24\n\t"
+		     "fld.p     %0, (13*8), fp26\n\t"
+		     "fld.p     %0, (14*8), fp28\n\t"
+		     "fld.p     %0, (15*8), fp30\n\t"
+		     "fld.p     %0, (16*8), fp32\n\t"
+		     "fld.p     %0, (17*8), fp34\n\t"
+		     "fld.p     %0, (18*8), fp36\n\t"
+		     "fld.p     %0, (19*8), fp38\n\t"
+		     "fld.p     %0, (20*8), fp40\n\t"
+		     "fld.p     %0, (21*8), fp42\n\t"
+		     "fld.p     %0, (22*8), fp44\n\t"
+		     "fld.p     %0, (23*8), fp46\n\t"
+		     "fld.p     %0, (24*8), fp48\n\t"
+		     "fld.p     %0, (25*8), fp50\n\t"
+		     "fld.p     %0, (26*8), fp52\n\t"
+		     "fld.p     %0, (27*8), fp54\n\t"
+		     "fld.p     %0, (28*8), fp56\n\t"
+		     "fld.p     %0, (29*8), fp58\n\t"
+		     "fld.p     %0, (30*8), fp60\n\t"
+
+		     "fld.s     %0, (32*8), fr63\n\t"
+		     "fputscr   fr63\n\t"
+
+		     "fld.p     %0, (31*8), fp62\n\t"
+		: /* no output */
+		: "r" (&tsk->thread.xstate->hardfpu)
+		: "memory");
+}
+
+asmlinkage void do_fpu_error(unsigned long ex, struct pt_regs *regs)
+{
+	struct task_struct *tsk = current;
+
+	regs->pc += 4;
+
+	force_sig(SIGFPE, tsk);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/probe.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/probe.c
new file mode 100644
index 0000000..eca427c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/probe.c
@@ -0,0 +1,75 @@
+/*
+ * arch/sh/kernel/cpu/sh5/probe.c
+ *
+ * CPU Subtype Probing for SH-5.
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003 - 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/tlb.h>
+
+void cpu_probe(void)
+{
+	unsigned long long cir;
+
+	/*
+	 * Do peeks in real mode to avoid having to set up a mapping for
+	 * the WPC registers. On SH5-101 cut2, such a mapping would be
+	 * exposed to an address translation erratum which would make it
+	 * hard to set up correctly.
+	 */
+	cir = peek_real_address_q(0x0d000008);
+	if ((cir & 0xffff) == 0x5103)
+		boot_cpu_data.type = CPU_SH5_103;
+	else if (((cir >> 32) & 0xffff) == 0x51e2)
+		/* CPU.VCR aliased at CIR address on SH5-101 */
+		boot_cpu_data.type = CPU_SH5_101;
+
+	boot_cpu_data.family = CPU_FAMILY_SH5;
+
+	/*
+	 * First, setup some sane values for the I-cache.
+	 */
+	boot_cpu_data.icache.ways		= 4;
+	boot_cpu_data.icache.sets		= 256;
+	boot_cpu_data.icache.linesz		= L1_CACHE_BYTES;
+	boot_cpu_data.icache.way_incr		= (1 << 13);
+	boot_cpu_data.icache.entry_shift	= 5;
+	boot_cpu_data.icache.way_size		= boot_cpu_data.icache.sets *
+						  boot_cpu_data.icache.linesz;
+	boot_cpu_data.icache.entry_mask		= 0x1fe0;
+	boot_cpu_data.icache.flags		= 0;
+
+	/*
+	 * Next, setup some sane values for the D-cache.
+	 *
+	 * On the SH5, these are pretty consistent with the I-cache settings,
+	 * so we just copy over the existing definitions.. these can be fixed
+	 * up later, especially if we add runtime CPU probing.
+	 *
+	 * Though in the meantime it saves us from having to duplicate all of
+	 * the above definitions..
+	 */
+	boot_cpu_data.dcache		= boot_cpu_data.icache;
+
+	/*
+	 * Setup any cache-related flags here
+	 */
+#if defined(CONFIG_CACHE_WRITETHROUGH)
+	set_bit(SH_CACHE_MODE_WT, &(boot_cpu_data.dcache.flags));
+#elif defined(CONFIG_CACHE_WRITEBACK)
+	set_bit(SH_CACHE_MODE_WB, &(boot_cpu_data.dcache.flags));
+#endif
+
+	/* Setup some I/D TLB defaults */
+	sh64_tlb_init();
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/setup-sh5.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/setup-sh5.c
new file mode 100644
index 0000000..084a9cc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/setup-sh5.c
@@ -0,0 +1,123 @@
+/*
+ * SH5-101/SH5-103 CPU Setup
+ *
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/sh_timer.h>
+#include <asm/addrspace.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.flags		= UPF_IOREMAP,
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(PHYS_PERIPHERAL_BLOCK + 0x01030000, 0x100),
+	DEFINE_RES_IRQ(39),
+	DEFINE_RES_IRQ(40),
+	DEFINE_RES_IRQ(42),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= PHYS_PERIPHERAL_BLOCK + 0x01040000,
+		.end	= PHYS_PERIPHERAL_BLOCK + 0x01040000 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Period IRQ */
+		.start	= IRQ_PRI,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* Carry IRQ */
+		.start	= IRQ_CUI,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		/* Alarm IRQ */
+		.start	= IRQ_ATI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+#define	TMU_BLOCK_OFF	0x01020000
+#define TMU_BASE	PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
+
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
+};
+
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(TMU_BASE, 0x30),
+	DEFINE_RES_IRQ(IRQ_TUNI0),
+	DEFINE_RES_IRQ(IRQ_TUNI1),
+	DEFINE_RES_IRQ(IRQ_TUNI2),
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct platform_device *sh5_early_devices[] __initdata = {
+	&scif0_device,
+	&tmu0_device,
+};
+
+static struct platform_device *sh5_devices[] __initdata = {
+	&rtc_device,
+};
+
+static int __init sh5_devices_setup(void)
+{
+	int ret;
+
+	ret = platform_add_devices(sh5_early_devices,
+				   ARRAY_SIZE(sh5_early_devices));
+	if (unlikely(ret != 0))
+		return ret;
+
+	return platform_add_devices(sh5_devices,
+				    ARRAY_SIZE(sh5_devices));
+}
+arch_initcall(sh5_devices_setup);
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh5_early_devices,
+				   ARRAY_SIZE(sh5_early_devices));
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/switchto.S b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/switchto.S
new file mode 100644
index 0000000..45c351b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/switchto.S
@@ -0,0 +1,198 @@
+/*
+ * arch/sh/kernel/cpu/sh5/switchto.S
+ *
+ * sh64 context switch
+ *
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+*/
+
+	.section .text..SHmedia32,"ax"
+	.little
+
+	.balign 32
+
+	.type sh64_switch_to,@function
+	.global sh64_switch_to
+	.global __sh64_switch_to_end
+sh64_switch_to:
+
+/* Incoming args
+   r2 - prev
+   r3 - &prev->thread
+   r4 - next
+   r5 - &next->thread
+
+   Outgoing results
+   r2 - last (=prev) : this just stays in r2 throughout
+
+   Want to create a full (struct pt_regs) on the stack to allow backtracing
+   functions to work.  However, we only need to populate the callee-save
+   register slots in this structure; since we're a function our ancestors must
+   have themselves preserved all caller saved state in the stack.  This saves
+   some wasted effort since we won't need to look at the values.
+
+   In particular, all caller-save registers are immediately available for
+   scratch use.
+
+*/
+
+#define FRAME_SIZE (76*8 + 8)
+
+	movi	FRAME_SIZE, r0
+	sub.l	r15, r0, r15
+	! Do normal-style register save to support backtrace
+
+	st.l	r15,   0, r18	! save link reg
+	st.l	r15,   4, r14	! save fp
+	add.l	r15, r63, r14	! setup frame pointer
+
+	! hopefully this looks normal to the backtrace now.
+
+	addi.l	r15,   8, r1    ! base of pt_regs
+	addi.l	r1,   24, r0    ! base of pt_regs.regs
+	addi.l	r0, (63*8), r8	! base of pt_regs.trregs
+
+	/* Note : to be fixed?
+	   struct pt_regs is really designed for holding the state on entry
+	   to an exception, i.e. pc,sr,regs etc.  However, for the context
+	   switch state, some of this is not required.  But the unwinder takes
+	   struct pt_regs * as an arg so we have to build this structure
+	   to allow unwinding switched tasks in show_state() */
+
+	st.q	r0, ( 9*8), r9
+	st.q	r0, (10*8), r10
+	st.q	r0, (11*8), r11
+	st.q	r0, (12*8), r12
+	st.q	r0, (13*8), r13
+	st.q	r0, (14*8), r14 ! for unwind, want to look as though we took a trap at
+	! the point where the process is left in suspended animation, i.e. current
+	! fp here, not the saved one.
+	st.q	r0, (16*8), r16
+
+	st.q	r0, (24*8), r24
+	st.q	r0, (25*8), r25
+	st.q	r0, (26*8), r26
+	st.q	r0, (27*8), r27
+	st.q	r0, (28*8), r28
+	st.q	r0, (29*8), r29
+	st.q	r0, (30*8), r30
+	st.q	r0, (31*8), r31
+	st.q	r0, (32*8), r32
+	st.q	r0, (33*8), r33
+	st.q	r0, (34*8), r34
+	st.q	r0, (35*8), r35
+
+	st.q	r0, (44*8), r44
+	st.q	r0, (45*8), r45
+	st.q	r0, (46*8), r46
+	st.q	r0, (47*8), r47
+	st.q	r0, (48*8), r48
+	st.q	r0, (49*8), r49
+	st.q	r0, (50*8), r50
+	st.q	r0, (51*8), r51
+	st.q	r0, (52*8), r52
+	st.q	r0, (53*8), r53
+	st.q	r0, (54*8), r54
+	st.q	r0, (55*8), r55
+	st.q	r0, (56*8), r56
+	st.q	r0, (57*8), r57
+	st.q	r0, (58*8), r58
+	st.q	r0, (59*8), r59
+
+	! do this early as pta->gettr has no pipeline forwarding (=> 5 cycle latency)
+	! Use a local label to avoid creating a symbol that will confuse the !
+	! backtrace
+	pta	.Lsave_pc, tr0
+
+	gettr	tr5, r45
+	gettr	tr6, r46
+	gettr	tr7, r47
+	st.q	r8, (5*8), r45
+	st.q	r8, (6*8), r46
+	st.q	r8, (7*8), r47
+
+	! Now switch context
+	gettr	tr0, r9
+	st.l	r3, 0, r15	! prev->thread.sp
+	st.l	r3, 8, r1	! prev->thread.kregs
+	st.l	r3, 4, r9	! prev->thread.pc
+	st.q	r1, 0, r9	! save prev->thread.pc into pt_regs->pc
+
+	! Load PC for next task (init value or save_pc later)
+	ld.l	r5, 4, r18	! next->thread.pc
+	! Switch stacks
+	ld.l	r5, 0, r15	! next->thread.sp
+	ptabs	r18, tr0
+
+	! Update current
+	ld.l	r4, 4, r9	! next->thread_info (2nd element of next task_struct)
+	putcon	r9, kcr0	! current = next->thread_info
+
+	! go to save_pc for a reschedule, or the initial thread.pc for a new process
+	blink	tr0, r63
+
+	! Restore (when we come back to a previously saved task)
+.Lsave_pc:
+	addi.l	r15, 32, r0	! r0 = next's regs
+	addi.l	r0, (63*8), r8	! r8 = next's tr_regs
+
+	ld.q	r8, (5*8), r45
+	ld.q	r8, (6*8), r46
+	ld.q	r8, (7*8), r47
+	ptabs	r45, tr5
+	ptabs	r46, tr6
+	ptabs	r47, tr7
+
+	ld.q	r0, ( 9*8), r9
+	ld.q	r0, (10*8), r10
+	ld.q	r0, (11*8), r11
+	ld.q	r0, (12*8), r12
+	ld.q	r0, (13*8), r13
+	ld.q	r0, (14*8), r14
+	ld.q	r0, (16*8), r16
+
+	ld.q	r0, (24*8), r24
+	ld.q	r0, (25*8), r25
+	ld.q	r0, (26*8), r26
+	ld.q	r0, (27*8), r27
+	ld.q	r0, (28*8), r28
+	ld.q	r0, (29*8), r29
+	ld.q	r0, (30*8), r30
+	ld.q	r0, (31*8), r31
+	ld.q	r0, (32*8), r32
+	ld.q	r0, (33*8), r33
+	ld.q	r0, (34*8), r34
+	ld.q	r0, (35*8), r35
+
+	ld.q	r0, (44*8), r44
+	ld.q	r0, (45*8), r45
+	ld.q	r0, (46*8), r46
+	ld.q	r0, (47*8), r47
+	ld.q	r0, (48*8), r48
+	ld.q	r0, (49*8), r49
+	ld.q	r0, (50*8), r50
+	ld.q	r0, (51*8), r51
+	ld.q	r0, (52*8), r52
+	ld.q	r0, (53*8), r53
+	ld.q	r0, (54*8), r54
+	ld.q	r0, (55*8), r55
+	ld.q	r0, (56*8), r56
+	ld.q	r0, (57*8), r57
+	ld.q	r0, (58*8), r58
+	ld.q	r0, (59*8), r59
+
+	! epilogue
+	ld.l	r15, 0, r18
+	ld.l	r15, 4, r14
+	ptabs	r18, tr0
+	movi	FRAME_SIZE, r0
+	add	r15, r0, r15
+	blink	tr0, r63
+__sh64_switch_to_end:
+.LFE1:
+	.size	sh64_switch_to,.LFE1-sh64_switch_to
+
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/unwind.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/unwind.c
new file mode 100644
index 0000000..3a4fed4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/sh5/unwind.c
@@ -0,0 +1,345 @@
+/*
+ * arch/sh/kernel/cpu/sh5/unwind.c
+ *
+ * Copyright (C) 2004  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kallsyms.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/unwinder.h>
+#include <asm/stacktrace.h>
+
+static u8 regcache[63];
+
+/*
+ * Finding the previous stack frame isn't horribly straightforward as it is
+ * on some other platforms. In the sh64 case, we don't have "linked" stack
+ * frames, so we need to do a bit of work to determine the previous frame,
+ * and in turn, the previous r14/r18 pair.
+ *
+ * There are generally a few cases which determine where we can find out
+ * the r14/r18 values. In the general case, this can be determined by poking
+ * around the prologue of the symbol PC is in (note that we absolutely must
+ * have frame pointer support as well as the kernel symbol table mapped,
+ * otherwise we can't even get this far).
+ *
+ * In other cases, such as the interrupt/exception path, we can poke around
+ * the sp/fp.
+ *
+ * Notably, this entire approach is somewhat error prone, and in the event
+ * that the previous frame cannot be determined, that's all we can do.
+ * Either way, this still leaves us with a more correct backtrace then what
+ * we would be able to come up with by walking the stack (which is garbage
+ * for anything beyond the first frame).
+ *						-- PFM.
+ */
+static int lookup_prev_stack_frame(unsigned long fp, unsigned long pc,
+		      unsigned long *pprev_fp, unsigned long *pprev_pc,
+		      struct pt_regs *regs)
+{
+	const char *sym;
+	char namebuf[128];
+	unsigned long offset;
+	unsigned long prologue = 0;
+	unsigned long fp_displacement = 0;
+	unsigned long fp_prev = 0;
+	unsigned long offset_r14 = 0, offset_r18 = 0;
+	int i, found_prologue_end = 0;
+
+	sym = kallsyms_lookup(pc, NULL, &offset, NULL, namebuf);
+	if (!sym)
+		return -EINVAL;
+
+	prologue = pc - offset;
+	if (!prologue)
+		return -EINVAL;
+
+	/* Validate fp, to avoid risk of dereferencing a bad pointer later.
+	   Assume 128Mb since that's the amount of RAM on a Cayman.  Modify
+	   when there is an SH-5 board with more. */
+	if ((fp < (unsigned long) phys_to_virt(__MEMORY_START)) ||
+	    (fp >= (unsigned long)(phys_to_virt(__MEMORY_START)) + 128*1024*1024) ||
+	    ((fp & 7) != 0)) {
+		return -EINVAL;
+	}
+
+	/*
+	 * Depth to walk, depth is completely arbitrary.
+	 */
+	for (i = 0; i < 100; i++, prologue += sizeof(unsigned long)) {
+		unsigned long op;
+		u8 major, minor;
+		u8 src, dest, disp;
+
+		op = *(unsigned long *)prologue;
+
+		major = (op >> 26) & 0x3f;
+		src   = (op >> 20) & 0x3f;
+		minor = (op >> 16) & 0xf;
+		disp  = (op >> 10) & 0x3f;
+		dest  = (op >>  4) & 0x3f;
+
+		/*
+		 * Stack frame creation happens in a number of ways.. in the
+		 * general case when the stack frame is less than 511 bytes,
+		 * it's generally created by an addi or addi.l:
+		 *
+		 *	addi/addi.l r15, -FRAME_SIZE, r15
+		 *
+		 * in the event that the frame size is bigger than this, it's
+		 * typically created using a movi/sub pair as follows:
+		 *
+		 *	movi	FRAME_SIZE, rX
+		 *	sub	r15, rX, r15
+		 */
+
+		switch (major) {
+		case (0x00 >> 2):
+			switch (minor) {
+			case 0x8: /* add.l */
+			case 0x9: /* add */
+				/* Look for r15, r63, r14 */
+				if (src == 15 && disp == 63 && dest == 14)
+					found_prologue_end = 1;
+
+				break;
+			case 0xa: /* sub.l */
+			case 0xb: /* sub */
+				if (src != 15 || dest != 15)
+					continue;
+
+				fp_displacement -= regcache[disp];
+				fp_prev = fp - fp_displacement;
+				break;
+			}
+			break;
+		case (0xa8 >> 2): /* st.l */
+			if (src != 15)
+				continue;
+
+			switch (dest) {
+			case 14:
+				if (offset_r14 || fp_displacement == 0)
+					continue;
+
+				offset_r14 = (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54);
+				offset_r14 *= sizeof(unsigned long);
+				offset_r14 += fp_displacement;
+				break;
+			case 18:
+				if (offset_r18 || fp_displacement == 0)
+					continue;
+
+				offset_r18 = (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54);
+				offset_r18 *= sizeof(unsigned long);
+				offset_r18 += fp_displacement;
+				break;
+			}
+
+			break;
+		case (0xcc >> 2): /* movi */
+			if (dest >= 63) {
+				printk(KERN_NOTICE "%s: Invalid dest reg %d "
+				       "specified in movi handler. Failed "
+				       "opcode was 0x%lx: ", __func__,
+				       dest, op);
+
+				continue;
+			}
+
+			/* Sign extend */
+			regcache[dest] =
+				sign_extend64((((u64)op >> 10) & 0xffff), 9);
+			break;
+		case (0xd0 >> 2): /* addi */
+		case (0xd4 >> 2): /* addi.l */
+			/* Look for r15, -FRAME_SIZE, r15 */
+			if (src != 15 || dest != 15)
+				continue;
+
+			/* Sign extended frame size.. */
+			fp_displacement +=
+				(u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54);
+			fp_prev = fp - fp_displacement;
+			break;
+		}
+
+		if (found_prologue_end && offset_r14 && (offset_r18 || *pprev_pc) && fp_prev)
+			break;
+	}
+
+	if (offset_r14 == 0 || fp_prev == 0) {
+		if (!offset_r14)
+			pr_debug("Unable to find r14 offset\n");
+		if (!fp_prev)
+			pr_debug("Unable to find previous fp\n");
+
+		return -EINVAL;
+	}
+
+	/* For innermost leaf function, there might not be a offset_r18 */
+	if (!*pprev_pc && (offset_r18 == 0))
+		return -EINVAL;
+
+	*pprev_fp = *(unsigned long *)(fp_prev + offset_r14);
+
+	if (offset_r18)
+		*pprev_pc = *(unsigned long *)(fp_prev + offset_r18);
+
+	*pprev_pc &= ~1;
+
+	return 0;
+}
+
+/*
+ * Don't put this on the stack since we'll want to call in to
+ * sh64_unwinder_dump() when we're close to underflowing the stack
+ * anyway.
+ */
+static struct pt_regs here_regs;
+
+extern const char syscall_ret;
+extern const char ret_from_syscall;
+extern const char ret_from_exception;
+extern const char ret_from_irq;
+
+static void sh64_unwind_inner(const struct stacktrace_ops *ops,
+			      void *data, struct pt_regs *regs);
+
+static inline void unwind_nested(const struct stacktrace_ops *ops, void *data,
+				 unsigned long pc, unsigned long fp)
+{
+	if ((fp >= __MEMORY_START) &&
+	    ((fp & 7) == 0))
+		sh64_unwind_inner(ops, data, (struct pt_regs *)fp);
+}
+
+static void sh64_unwind_inner(const struct stacktrace_ops *ops,
+			      void *data, struct pt_regs *regs)
+{
+	unsigned long pc, fp;
+	int ofs = 0;
+	int first_pass;
+
+	pc = regs->pc & ~1;
+	fp = regs->regs[14];
+
+	first_pass = 1;
+	for (;;) {
+		int cond;
+		unsigned long next_fp, next_pc;
+
+		if (pc == ((unsigned long)&syscall_ret & ~1)) {
+			printk("SYSCALL\n");
+			unwind_nested(ops, data, pc, fp);
+			return;
+		}
+
+		if (pc == ((unsigned long)&ret_from_syscall & ~1)) {
+			printk("SYSCALL (PREEMPTED)\n");
+			unwind_nested(ops, data, pc, fp);
+			return;
+		}
+
+		/* In this case, the PC is discovered by lookup_prev_stack_frame but
+		   it has 4 taken off it to look like the 'caller' */
+		if (pc == ((unsigned long)&ret_from_exception & ~1)) {
+			printk("EXCEPTION\n");
+			unwind_nested(ops, data, pc, fp);
+			return;
+		}
+
+		if (pc == ((unsigned long)&ret_from_irq & ~1)) {
+			printk("IRQ\n");
+			unwind_nested(ops, data, pc, fp);
+			return;
+		}
+
+		cond = ((pc >= __MEMORY_START) && (fp >= __MEMORY_START) &&
+			((pc & 3) == 0) && ((fp & 7) == 0));
+
+		pc -= ofs;
+
+		ops->address(data, pc, 1);
+
+		if (first_pass) {
+			/* If the innermost frame is a leaf function, it's
+			 * possible that r18 is never saved out to the stack.
+			 */
+			next_pc = regs->regs[18];
+		} else {
+			next_pc = 0;
+		}
+
+		if (lookup_prev_stack_frame(fp, pc, &next_fp, &next_pc, regs) == 0) {
+			ofs = sizeof(unsigned long);
+			pc = next_pc & ~1;
+			fp = next_fp;
+		} else {
+			printk("Unable to lookup previous stack frame\n");
+			break;
+		}
+		first_pass = 0;
+	}
+
+	printk("\n");
+}
+
+static void sh64_unwinder_dump(struct task_struct *task,
+			       struct pt_regs *regs,
+			       unsigned long *sp,
+			       const struct stacktrace_ops *ops,
+			       void *data)
+{
+	if (!regs) {
+		/*
+		 * Fetch current regs if we have no other saved state to back
+		 * trace from.
+		 */
+		regs = &here_regs;
+
+		__asm__ __volatile__ ("ori r14, 0, %0" : "=r" (regs->regs[14]));
+		__asm__ __volatile__ ("ori r15, 0, %0" : "=r" (regs->regs[15]));
+		__asm__ __volatile__ ("ori r18, 0, %0" : "=r" (regs->regs[18]));
+
+		__asm__ __volatile__ ("gettr tr0, %0" : "=r" (regs->tregs[0]));
+		__asm__ __volatile__ ("gettr tr1, %0" : "=r" (regs->tregs[1]));
+		__asm__ __volatile__ ("gettr tr2, %0" : "=r" (regs->tregs[2]));
+		__asm__ __volatile__ ("gettr tr3, %0" : "=r" (regs->tregs[3]));
+		__asm__ __volatile__ ("gettr tr4, %0" : "=r" (regs->tregs[4]));
+		__asm__ __volatile__ ("gettr tr5, %0" : "=r" (regs->tregs[5]));
+		__asm__ __volatile__ ("gettr tr6, %0" : "=r" (regs->tregs[6]));
+		__asm__ __volatile__ ("gettr tr7, %0" : "=r" (regs->tregs[7]));
+
+		__asm__ __volatile__ (
+			"pta 0f, tr0\n\t"
+			"blink tr0, %0\n\t"
+			"0: nop"
+			: "=r" (regs->pc)
+		);
+	}
+
+	sh64_unwind_inner(ops, data, regs);
+}
+
+static struct unwinder sh64_unwinder = {
+	.name	= "sh64-unwinder",
+	.dump	= sh64_unwinder_dump,
+	.rating	= 150,
+};
+
+static int __init sh64_unwinder_init(void)
+{
+	return unwinder_register(&sh64_unwinder);
+}
+early_initcall(sh64_unwinder_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/shmobile/Makefile b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/shmobile/Makefile
new file mode 100644
index 0000000..e8a5111
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/shmobile/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Linux/SuperH SH-Mobile backends.
+#
+
+# Power Management & Sleep mode
+obj-$(CONFIG_PM)	+= pm.o sleep.o
+obj-$(CONFIG_CPU_IDLE)	+= cpuidle.o
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/shmobile/cpuidle.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/shmobile/cpuidle.c
new file mode 100644
index 0000000..c32e660
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/shmobile/cpuidle.c
@@ -0,0 +1,98 @@
+/*
+ * arch/sh/kernel/cpu/shmobile/cpuidle.c
+ *
+ * Cpuidle support code for SuperH Mobile
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/suspend.h>
+#include <linux/cpuidle.h>
+#include <linux/export.h>
+#include <asm/suspend.h>
+#include <linux/uaccess.h>
+
+static unsigned long cpuidle_mode[] = {
+	SUSP_SH_SLEEP, /* regular sleep mode */
+	SUSP_SH_SLEEP | SUSP_SH_SF, /* sleep mode + self refresh */
+	SUSP_SH_STANDBY | SUSP_SH_SF, /* software standby mode + self refresh */
+};
+
+static int cpuidle_sleep_enter(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv,
+				int index)
+{
+	unsigned long allowed_mode = SUSP_SH_SLEEP;
+	int requested_state = index;
+	int allowed_state;
+	int k;
+
+	/* convert allowed mode to allowed state */
+	for (k = ARRAY_SIZE(cpuidle_mode) - 1; k > 0; k--)
+		if (cpuidle_mode[k] == allowed_mode)
+			break;
+
+	allowed_state = k;
+
+	/* take the following into account for sleep mode selection:
+	 * - allowed_state: best mode allowed by hardware (clock deps)
+	 * - requested_state: best mode allowed by software (latencies)
+	 */
+	k = min_t(int, allowed_state, requested_state);
+
+	sh_mobile_call_standby(cpuidle_mode[k]);
+
+	return k;
+}
+
+static struct cpuidle_driver cpuidle_driver = {
+	.name   = "sh_idle",
+	.owner  = THIS_MODULE,
+	.states = {
+		{
+			.exit_latency = 1,
+			.target_residency = 1 * 2,
+			.power_usage = 3,
+			.enter = cpuidle_sleep_enter,
+			.name = "C1",
+			.desc = "SuperH Sleep Mode",
+		},
+		{
+			.exit_latency = 100,
+			.target_residency = 1 * 2,
+			.power_usage = 1,
+			.enter = cpuidle_sleep_enter,
+			.name = "C2",
+			.desc = "SuperH Sleep Mode [SF]",
+			.disabled = true,
+		},
+		{
+			.exit_latency = 2300,
+			.target_residency = 1 * 2,
+			.power_usage = 1,
+			.enter = cpuidle_sleep_enter,
+			.name = "C3",
+			.desc = "SuperH Mobile Standby Mode [SF]",
+			.disabled = true,
+		},
+	},
+	.safe_state_index = 0,
+	.state_count = 3,
+};
+
+int __init sh_mobile_setup_cpuidle(void)
+{
+	if (sh_mobile_sleep_supported & SUSP_SH_SF)
+		cpuidle_driver.states[1].disabled = false;
+
+	if (sh_mobile_sleep_supported & SUSP_SH_STANDBY)
+		cpuidle_driver.states[2].disabled = false;
+
+	return cpuidle_register(&cpuidle_driver, NULL);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/shmobile/pm.c b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/shmobile/pm.c
new file mode 100644
index 0000000..fba2be5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/shmobile/pm.c
@@ -0,0 +1,156 @@
+/*
+ * arch/sh/kernel/cpu/shmobile/pm.c
+ *
+ * Power management support code for SuperH Mobile
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include <linux/uaccess.h>
+#include <asm/cacheflush.h>
+#include <asm/bl_bit.h>
+
+/*
+ * Notifier lists for pre/post sleep notification
+ */
+ATOMIC_NOTIFIER_HEAD(sh_mobile_pre_sleep_notifier_list);
+ATOMIC_NOTIFIER_HEAD(sh_mobile_post_sleep_notifier_list);
+
+/*
+ * Sleep modes available on SuperH Mobile:
+ *
+ * Sleep mode is just plain "sleep" instruction
+ * Sleep Self-Refresh mode is above plus RAM put in Self-Refresh
+ * Standby Self-Refresh mode is above plus stopped clocks
+ */
+#define SUSP_MODE_SLEEP		(SUSP_SH_SLEEP)
+#define SUSP_MODE_SLEEP_SF	(SUSP_SH_SLEEP | SUSP_SH_SF)
+#define SUSP_MODE_STANDBY_SF	(SUSP_SH_STANDBY | SUSP_SH_SF)
+#define SUSP_MODE_RSTANDBY_SF \
+	(SUSP_SH_RSTANDBY | SUSP_SH_MMU | SUSP_SH_REGS | SUSP_SH_SF)
+ /*
+  * U-standby mode is unsupported since it needs bootloader hacks
+  */
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+#define RAM_BASE 0xfd800000 /* RSMEM */
+#else
+#define RAM_BASE 0xe5200000 /* ILRAM */
+#endif
+
+void sh_mobile_call_standby(unsigned long mode)
+{
+	void *onchip_mem = (void *)RAM_BASE;
+	struct sh_sleep_data *sdp = onchip_mem;
+	void (*standby_onchip_mem)(unsigned long, unsigned long);
+
+	/* code located directly after data structure */
+	standby_onchip_mem = (void *)(sdp + 1);
+
+	atomic_notifier_call_chain(&sh_mobile_pre_sleep_notifier_list,
+				   mode, NULL);
+
+	/* flush the caches if MMU flag is set */
+	if (mode & SUSP_SH_MMU)
+		flush_cache_all();
+
+	/* Let assembly snippet in on-chip memory handle the rest */
+	standby_onchip_mem(mode, RAM_BASE);
+
+	atomic_notifier_call_chain(&sh_mobile_post_sleep_notifier_list,
+				   mode, NULL);
+}
+
+extern char sh_mobile_sleep_enter_start;
+extern char sh_mobile_sleep_enter_end;
+
+extern char sh_mobile_sleep_resume_start;
+extern char sh_mobile_sleep_resume_end;
+
+unsigned long sh_mobile_sleep_supported = SUSP_SH_SLEEP;
+
+void sh_mobile_register_self_refresh(unsigned long flags,
+				     void *pre_start, void *pre_end,
+				     void *post_start, void *post_end)
+{
+	void *onchip_mem = (void *)RAM_BASE;
+	void *vp;
+	struct sh_sleep_data *sdp;
+	int n;
+
+	/* part 0: data area */
+	sdp = onchip_mem;
+	sdp->addr.stbcr = 0xa4150020; /* STBCR */
+	sdp->addr.bar = 0xa4150040; /* BAR */
+	sdp->addr.pteh = 0xff000000; /* PTEH */
+	sdp->addr.ptel = 0xff000004; /* PTEL */
+	sdp->addr.ttb = 0xff000008; /* TTB */
+	sdp->addr.tea = 0xff00000c; /* TEA */
+	sdp->addr.mmucr = 0xff000010; /* MMUCR */
+	sdp->addr.ptea = 0xff000034; /* PTEA */
+	sdp->addr.pascr = 0xff000070; /* PASCR */
+	sdp->addr.irmcr = 0xff000078; /* IRMCR */
+	sdp->addr.ccr = 0xff00001c; /* CCR */
+	sdp->addr.ramcr = 0xff000074; /* RAMCR */
+	vp = sdp + 1;
+
+	/* part 1: common code to enter sleep mode */
+	n = &sh_mobile_sleep_enter_end - &sh_mobile_sleep_enter_start;
+	memcpy(vp, &sh_mobile_sleep_enter_start, n);
+	vp += roundup(n, 4);
+
+	/* part 2: board specific code to enter self-refresh mode */
+	n = pre_end - pre_start;
+	memcpy(vp, pre_start, n);
+	sdp->sf_pre = (unsigned long)vp;
+	vp += roundup(n, 4);
+
+	/* part 3: board specific code to resume from self-refresh mode */
+	n = post_end - post_start;
+	memcpy(vp, post_start, n);
+	sdp->sf_post = (unsigned long)vp;
+	vp += roundup(n, 4);
+
+	/* part 4: common code to resume from sleep mode */
+	WARN_ON(vp > (onchip_mem + 0x600));
+	vp = onchip_mem + 0x600; /* located at interrupt vector */
+	n = &sh_mobile_sleep_resume_end - &sh_mobile_sleep_resume_start;
+	memcpy(vp, &sh_mobile_sleep_resume_start, n);
+	sdp->resume = (unsigned long)vp;
+
+	sh_mobile_sleep_supported |= flags;
+}
+
+static int sh_pm_enter(suspend_state_t state)
+{
+	if (!(sh_mobile_sleep_supported & SUSP_MODE_STANDBY_SF))
+		return -ENXIO;
+
+	local_irq_disable();
+	set_bl_bit();
+	sh_mobile_call_standby(SUSP_MODE_STANDBY_SF);
+	local_irq_disable();
+	clear_bl_bit();
+	return 0;
+}
+
+static const struct platform_suspend_ops sh_pm_ops = {
+	.enter          = sh_pm_enter,
+	.valid          = suspend_valid_only_mem,
+};
+
+static int __init sh_pm_init(void)
+{
+	suspend_set_ops(&sh_pm_ops);
+	return sh_mobile_setup_cpuidle();
+}
+
+late_initcall(sh_pm_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/cpu/shmobile/sleep.S b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/shmobile/sleep.S
new file mode 100644
index 0000000..e6aac65
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/cpu/shmobile/sleep.S
@@ -0,0 +1,405 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S
+ *
+ * Sleep mode and Standby modes support for SuperH Mobile
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+
+/*
+ * Kernel mode register usage, see entry.S:
+ *	k0	scratch
+ *	k1	scratch
+ */
+#define k0	r0
+#define k1	r1
+
+/* manage self-refresh and enter standby mode. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(sh_mobile_sleep_enter_start)
+
+	/* save mode flags */
+	mov.l	r4, @(SH_SLEEP_MODE, r5)
+
+	/* save original vbr */
+	stc	vbr, r0
+	mov.l	r0, @(SH_SLEEP_VBR, r5)
+
+	/* point vbr to our on-chip memory page */
+	ldc	r5, vbr
+
+	/* save return address */
+	sts	pr, r0
+	mov.l	r0, @(SH_SLEEP_SPC, r5)
+
+	/* save sr */
+	stc	sr, r0
+	mov.l	r0, @(SH_SLEEP_SR, r5)
+
+	/* save general purpose registers to stack if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_REGS, r0
+	bt	skip_regs_save
+
+	sts.l	pr, @-r15
+	mov.l	r14, @-r15
+	mov.l	r13, @-r15
+	mov.l	r12, @-r15
+	mov.l	r11, @-r15
+	mov.l	r10, @-r15
+	mov.l	r9, @-r15
+	mov.l	r8, @-r15
+
+	/* make sure bank0 is selected, save low registers */
+	mov.l	rb_bit, r9
+	not	r9, r9
+	bsr	set_sr
+	 mov	#0, r10
+
+	bsr	save_low_regs
+	 nop
+
+	/* switch to bank 1, save low registers */
+	mov.l	rb_bit, r10
+	bsr	set_sr
+	 mov	#-1, r9
+
+	bsr	save_low_regs
+	 nop
+
+	/* switch back to bank 0 */
+	mov.l	rb_bit, r9
+	not	r9, r9
+	bsr	set_sr
+	 mov	#0, r10
+
+skip_regs_save:
+
+	/* save sp, also set to internal ram */
+	mov.l	r15, @(SH_SLEEP_SP, r5)
+	mov	r5, r15
+
+	/* save stbcr */
+	bsr     save_register
+	 mov    #SH_SLEEP_REG_STBCR, r0
+
+	/* save mmu and cache context if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_MMU, r0
+	bt	skip_mmu_save_disable
+
+	/* save mmu state */
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_PTEH, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_PTEL, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_TTB, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_TEA, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_MMUCR, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_PTEA, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_PASCR, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_IRMCR, r0
+
+	/* invalidate TLBs and disable the MMU */
+	bsr	get_register
+	 mov	#SH_SLEEP_REG_MMUCR, r0
+	mov	#4, r1
+	mov.l	r1, @r0
+	icbi	@r0
+
+	/* save cache registers and disable caches */
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_CCR, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_RAMCR, r0
+
+	bsr	get_register
+	 mov	#SH_SLEEP_REG_CCR, r0
+	mov	#0, r1
+	mov.l	r1, @r0
+	icbi	@r0
+
+skip_mmu_save_disable:
+	/* call self-refresh entering code if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_SF, r0
+	bt	skip_set_sf
+
+	mov.l	@(SH_SLEEP_SF_PRE, r5), r0
+	jsr	@r0
+	 nop
+
+skip_set_sf:
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_STANDBY, r0
+	bt	test_rstandby
+
+	/* set mode to "software standby mode" */
+	bra	do_sleep
+	 mov	#0x80, r1
+
+test_rstandby:
+	tst	#SUSP_SH_RSTANDBY, r0
+	bt	test_ustandby
+
+	/* setup BAR register */
+	bsr	get_register
+	 mov	#SH_SLEEP_REG_BAR, r0
+	mov.l	@(SH_SLEEP_RESUME, r5), r1
+	mov.l	r1, @r0
+
+	/* set mode to "r-standby mode" */
+	bra	do_sleep
+	 mov	#0x20, r1
+
+test_ustandby:
+	tst	#SUSP_SH_USTANDBY, r0
+	bt	force_sleep
+
+	/* set mode to "u-standby mode" */
+	bra	do_sleep
+	 mov	#0x10, r1
+
+force_sleep:
+
+	/* set mode to "sleep mode" */
+	mov	#0x00, r1
+
+do_sleep:
+	/* setup and enter selected standby mode */
+	bsr     get_register
+	 mov    #SH_SLEEP_REG_STBCR, r0
+	mov.l	r1, @r0
+again:
+	sleep
+	bra	again
+	 nop
+
+save_register:
+	add	#SH_SLEEP_BASE_ADDR, r0
+	mov.l	@(r0, r5), r1
+	add	#-SH_SLEEP_BASE_ADDR, r0
+	mov.l	@r1, r1
+	add	#SH_SLEEP_BASE_DATA, r0
+	mov.l	r1, @(r0, r5)
+	add	#-SH_SLEEP_BASE_DATA, r0
+	rts
+	 nop
+
+get_register:
+	add	#SH_SLEEP_BASE_ADDR, r0
+	mov.l	@(r0, r5), r0
+	rts
+	 nop
+
+set_sr:
+	stc	sr, r8
+	and	r9, r8
+	or	r10, r8
+	ldc	r8, sr
+	rts
+	 nop
+
+save_low_regs:
+	mov.l	r7, @-r15
+	mov.l	r6, @-r15
+	mov.l	r5, @-r15
+	mov.l	r4, @-r15
+	mov.l	r3, @-r15
+	mov.l	r2, @-r15
+	mov.l	r1, @-r15
+	rts
+	 mov.l	r0, @-r15
+
+	.balign 4
+rb_bit:	.long	0x20000000 ! RB=1
+
+ENTRY(sh_mobile_sleep_enter_end)
+
+	.balign 4
+ENTRY(sh_mobile_sleep_resume_start)
+
+	/* figure out start address */
+	bsr	0f
+	 nop
+0:
+	sts	pr, k1
+	mov.l	1f, k0
+	and	k0, k1
+
+	/* store pointer to data area in VBR */
+	ldc	k1, vbr
+
+	/* setup sr with saved sr */
+	mov.l	@(SH_SLEEP_SR, k1), k0
+	ldc	k0, sr
+
+	/* now: user register set! */
+	stc	vbr, r5
+
+	/* setup spc with return address to c code */
+	mov.l	@(SH_SLEEP_SPC, r5), r0
+	ldc	r0, spc
+
+	/* restore vbr */
+	mov.l	@(SH_SLEEP_VBR, r5), r0
+	ldc	r0, vbr
+
+	/* setup ssr with saved sr */
+	mov.l	@(SH_SLEEP_SR, r5), r0
+	ldc	r0, ssr
+
+	/* restore sp */
+	mov.l   @(SH_SLEEP_SP, r5), r15
+
+	/* restore sleep mode register */
+	bsr     restore_register
+	 mov    #SH_SLEEP_REG_STBCR, r0
+
+	/* call self-refresh resume code if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_SF, r0
+	bt	skip_restore_sf
+
+	mov.l	@(SH_SLEEP_SF_POST, r5), r0
+	jsr	@r0
+	 nop
+
+skip_restore_sf:
+	/* restore mmu and cache state if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_MMU, r0
+	bt	skip_restore_mmu
+
+	/* restore mmu state */
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_PTEH, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_PTEL, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_TTB, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_TEA, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_PTEA, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_PASCR, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_IRMCR, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_MMUCR, r0
+	icbi	@r0
+
+	/* restore cache settings */
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_RAMCR, r0
+	icbi	@r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_CCR, r0
+	icbi	@r0
+
+skip_restore_mmu:
+
+	/* restore general purpose registers if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_REGS, r0
+	bt	skip_restore_regs
+
+	/* switch to bank 1, restore low registers */
+	mov.l	_rb_bit, r10
+	bsr	_set_sr
+	 mov	#-1, r9
+
+	bsr	restore_low_regs
+	 nop
+
+	/* switch to bank0, restore low registers */
+	mov.l	_rb_bit, r9
+	not	r9, r9
+	bsr	_set_sr
+	 mov	#0, r10
+
+	bsr	restore_low_regs
+	 nop
+
+	/* restore the rest of the registers */
+	mov.l	@r15+, r8
+	mov.l	@r15+, r9
+	mov.l	@r15+, r10
+	mov.l	@r15+, r11
+	mov.l	@r15+, r12
+	mov.l	@r15+, r13
+	mov.l	@r15+, r14
+	lds.l	@r15+, pr
+
+skip_restore_regs:
+	rte
+	 nop
+
+restore_register:
+	add	#SH_SLEEP_BASE_DATA, r0
+	mov.l	@(r0, r5), r1
+	add	#-SH_SLEEP_BASE_DATA, r0
+	add	#SH_SLEEP_BASE_ADDR, r0
+	mov.l	@(r0, r5), r0
+	mov.l	r1, @r0
+	rts
+	 nop
+
+_set_sr:
+	stc	sr, r8
+	and	r9, r8
+	or	r10, r8
+	ldc	r8, sr
+	rts
+	 nop
+
+restore_low_regs:
+	mov.l	@r15+, r0
+	mov.l	@r15+, r1
+	mov.l	@r15+, r2
+	mov.l	@r15+, r3
+	mov.l	@r15+, r4
+	mov.l	@r15+, r5
+	mov.l	@r15+, r6
+	rts
+	 mov.l	@r15+, r7
+
+	.balign 4
+_rb_bit:	.long	0x20000000 ! RB=1
+1:	.long	~0x7ff
+ENTRY(sh_mobile_sleep_resume_end)
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/crash_dump.c b/src/kernel/linux/v4.14/arch/sh/kernel/crash_dump.c
new file mode 100644
index 0000000..a908612
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/crash_dump.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	crash_dump.c - Memory preserving reboot related code.
+ *
+ *	Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
+ *	Copyright (C) IBM Corporation, 2004. All rights reserved
+ */
+#include <linux/errno.h>
+#include <linux/crash_dump.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+/**
+ * copy_oldmem_page - copy one page from "oldmem"
+ * @pfn: page frame number to be copied
+ * @buf: target memory address for the copy; this can be in kernel address
+ *	space or user address space (see @userbuf)
+ * @csize: number of bytes to copy
+ * @offset: offset in bytes into the page (based on pfn) to begin the copy
+ * @userbuf: if set, @buf is in user address space, use copy_to_user(),
+ *	otherwise @buf is in kernel address space, use memcpy().
+ *
+ * Copy a page from "oldmem". For this page, there is no pte mapped
+ * in the current kernel. We stitch up a pte, similar to kmap_atomic.
+ */
+ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
+                               size_t csize, unsigned long offset, int userbuf)
+{
+	void  *vaddr;
+
+	if (!csize)
+		return 0;
+
+	vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
+
+	if (userbuf) {
+		if (copy_to_user(buf, (vaddr + offset), csize)) {
+			iounmap(vaddr);
+			return -EFAULT;
+		}
+	} else
+	memcpy(buf, (vaddr + offset), csize);
+
+	iounmap(vaddr);
+	return csize;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/debugtraps.S b/src/kernel/linux/v4.14/arch/sh/kernel/debugtraps.S
new file mode 100644
index 0000000..7a1b46f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/debugtraps.S
@@ -0,0 +1,41 @@
+/*
+ * arch/sh/kernel/debugtraps.S
+ *
+ * Debug trap jump tables for SuperH
+ *
+ *  Copyright (C) 2006 - 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+
+#if !defined(CONFIG_KGDB)
+#define singlestep_trap_handler		debug_trap_handler
+#endif
+
+#if !defined(CONFIG_SH_STANDARD_BIOS)
+#define sh_bios_handler			debug_trap_handler
+#endif
+
+	.data
+
+ENTRY(debug_trap_table)
+	.long debug_trap_handler	/* 0x30 */
+	.long debug_trap_handler	/* 0x31 */
+	.long debug_trap_handler	/* 0x32 */
+	.long debug_trap_handler	/* 0x33 */
+	.long debug_trap_handler	/* 0x34 */
+	.long debug_trap_handler	/* 0x35 */
+	.long debug_trap_handler	/* 0x36 */
+	.long debug_trap_handler	/* 0x37 */
+	.long debug_trap_handler	/* 0x38 */
+	.long debug_trap_handler	/* 0x39 */
+	.long debug_trap_handler	/* 0x3a */
+	.long debug_trap_handler	/* 0x3b */
+	.long breakpoint_trap_handler	/* 0x3c */
+	.long singlestep_trap_handler	/* 0x3d */
+	.long bug_trap_handler		/* 0x3e */
+	.long sh_bios_handler		/* 0x3f */
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/disassemble.c b/src/kernel/linux/v4.14/arch/sh/kernel/disassemble.c
new file mode 100644
index 0000000..015fee5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/disassemble.c
@@ -0,0 +1,575 @@
+/*
+ * Disassemble SuperH instructions.
+ *
+ * Copyright (C) 1999 kaz Kojima
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+
+#include <asm/ptrace.h>
+
+/*
+ * Format of an instruction in memory.
+ */
+typedef enum {
+	HEX_0, HEX_1, HEX_2, HEX_3, HEX_4, HEX_5, HEX_6, HEX_7,
+	HEX_8, HEX_9, HEX_A, HEX_B, HEX_C, HEX_D, HEX_E, HEX_F,
+	REG_N, REG_M, REG_NM, REG_B,
+	BRANCH_12, BRANCH_8,
+	DISP_8, DISP_4,
+	IMM_4, IMM_4BY2, IMM_4BY4, PCRELIMM_8BY2, PCRELIMM_8BY4,
+	IMM_8, IMM_8BY2, IMM_8BY4,
+} sh_nibble_type;
+
+typedef enum {
+	A_END, A_BDISP12, A_BDISP8,
+	A_DEC_M, A_DEC_N,
+	A_DISP_GBR, A_DISP_PC, A_DISP_REG_M, A_DISP_REG_N,
+	A_GBR,
+	A_IMM,
+	A_INC_M, A_INC_N,
+	A_IND_M, A_IND_N, A_IND_R0_REG_M, A_IND_R0_REG_N,
+	A_MACH, A_MACL,
+	A_PR, A_R0, A_R0_GBR, A_REG_M, A_REG_N, A_REG_B,
+	A_SR, A_VBR, A_SSR, A_SPC, A_SGR, A_DBR,
+	F_REG_N, F_REG_M, D_REG_N, D_REG_M,
+	X_REG_N, /* Only used for argument parsing */
+	X_REG_M, /* Only used for argument parsing */
+	DX_REG_N, DX_REG_M, V_REG_N, V_REG_M,
+	FD_REG_N,
+	XMTRX_M4,
+	F_FR0,
+	FPUL_N, FPUL_M, FPSCR_N, FPSCR_M,
+} sh_arg_type;
+
+static struct sh_opcode_info {
+	char *name;
+	sh_arg_type arg[7];
+	sh_nibble_type nibbles[4];
+} sh_table[] = {
+	{"add",{A_IMM,A_REG_N},{HEX_7,REG_N,IMM_8}},
+	{"add",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_C}},
+	{"addc",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_E}},
+	{"addv",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_F}},
+	{"and",{A_IMM,A_R0},{HEX_C,HEX_9,IMM_8}},
+	{"and",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_9}},
+	{"and.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_D,IMM_8}},
+	{"bra",{A_BDISP12},{HEX_A,BRANCH_12}},
+	{"bsr",{A_BDISP12},{HEX_B,BRANCH_12}},
+	{"bt",{A_BDISP8},{HEX_8,HEX_9,BRANCH_8}},
+	{"bf",{A_BDISP8},{HEX_8,HEX_B,BRANCH_8}},
+	{"bt.s",{A_BDISP8},{HEX_8,HEX_D,BRANCH_8}},
+	{"bt/s",{A_BDISP8},{HEX_8,HEX_D,BRANCH_8}},
+	{"bf.s",{A_BDISP8},{HEX_8,HEX_F,BRANCH_8}},
+	{"bf/s",{A_BDISP8},{HEX_8,HEX_F,BRANCH_8}},
+	{"clrmac",{0},{HEX_0,HEX_0,HEX_2,HEX_8}},
+	{"clrs",{0},{HEX_0,HEX_0,HEX_4,HEX_8}},
+	{"clrt",{0},{HEX_0,HEX_0,HEX_0,HEX_8}},
+	{"cmp/eq",{A_IMM,A_R0},{HEX_8,HEX_8,IMM_8}},
+	{"cmp/eq",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_0}},
+	{"cmp/ge",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_3}},
+	{"cmp/gt",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_7}},
+	{"cmp/hi",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_6}},
+	{"cmp/hs",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_2}},
+	{"cmp/pl",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_5}},
+	{"cmp/pz",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_1}},
+	{"cmp/str",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_C}},
+	{"div0s",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_7}},
+	{"div0u",{0},{HEX_0,HEX_0,HEX_1,HEX_9}},
+	{"div1",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_4}},
+	{"exts.b",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_E}},
+	{"exts.w",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_F}},
+	{"extu.b",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_C}},
+	{"extu.w",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_D}},
+	{"jmp",{A_IND_N},{HEX_4,REG_N,HEX_2,HEX_B}},
+	{"jsr",{A_IND_N},{HEX_4,REG_N,HEX_0,HEX_B}},
+	{"ldc",{A_REG_N,A_SR},{HEX_4,REG_N,HEX_0,HEX_E}},
+	{"ldc",{A_REG_N,A_GBR},{HEX_4,REG_N,HEX_1,HEX_E}},
+	{"ldc",{A_REG_N,A_VBR},{HEX_4,REG_N,HEX_2,HEX_E}},
+	{"ldc",{A_REG_N,A_SSR},{HEX_4,REG_N,HEX_3,HEX_E}},
+	{"ldc",{A_REG_N,A_SPC},{HEX_4,REG_N,HEX_4,HEX_E}},
+	{"ldc",{A_REG_N,A_DBR},{HEX_4,REG_N,HEX_7,HEX_E}},
+	{"ldc",{A_REG_N,A_REG_B},{HEX_4,REG_N,REG_B,HEX_E}},
+	{"ldc.l",{A_INC_N,A_SR},{HEX_4,REG_N,HEX_0,HEX_7}},
+	{"ldc.l",{A_INC_N,A_GBR},{HEX_4,REG_N,HEX_1,HEX_7}},
+	{"ldc.l",{A_INC_N,A_VBR},{HEX_4,REG_N,HEX_2,HEX_7}},
+	{"ldc.l",{A_INC_N,A_SSR},{HEX_4,REG_N,HEX_3,HEX_7}},
+	{"ldc.l",{A_INC_N,A_SPC},{HEX_4,REG_N,HEX_4,HEX_7}},
+	{"ldc.l",{A_INC_N,A_DBR},{HEX_4,REG_N,HEX_7,HEX_7}},
+	{"ldc.l",{A_INC_N,A_REG_B},{HEX_4,REG_N,REG_B,HEX_7}},
+	{"lds",{A_REG_N,A_MACH},{HEX_4,REG_N,HEX_0,HEX_A}},
+	{"lds",{A_REG_N,A_MACL},{HEX_4,REG_N,HEX_1,HEX_A}},
+	{"lds",{A_REG_N,A_PR},{HEX_4,REG_N,HEX_2,HEX_A}},
+	{"lds",{A_REG_M,FPUL_N},{HEX_4,REG_M,HEX_5,HEX_A}},
+	{"lds",{A_REG_M,FPSCR_N},{HEX_4,REG_M,HEX_6,HEX_A}},
+	{"lds.l",{A_INC_N,A_MACH},{HEX_4,REG_N,HEX_0,HEX_6}},
+	{"lds.l",{A_INC_N,A_MACL},{HEX_4,REG_N,HEX_1,HEX_6}},
+	{"lds.l",{A_INC_N,A_PR},{HEX_4,REG_N,HEX_2,HEX_6}},
+	{"lds.l",{A_INC_M,FPUL_N},{HEX_4,REG_M,HEX_5,HEX_6}},
+	{"lds.l",{A_INC_M,FPSCR_N},{HEX_4,REG_M,HEX_6,HEX_6}},
+	{"ldtlb",{0},{HEX_0,HEX_0,HEX_3,HEX_8}},
+	{"mac.w",{A_INC_M,A_INC_N},{HEX_4,REG_N,REG_M,HEX_F}},
+	{"mov",{A_IMM,A_REG_N},{HEX_E,REG_N,IMM_8}},
+	{"mov",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_3}},
+	{"mov.b",{ A_REG_M,A_IND_R0_REG_N},{HEX_0,REG_N,REG_M,HEX_4}},
+	{"mov.b",{ A_REG_M,A_DEC_N},{HEX_2,REG_N,REG_M,HEX_4}},
+	{"mov.b",{ A_REG_M,A_IND_N},{HEX_2,REG_N,REG_M,HEX_0}},
+	{"mov.b",{A_DISP_REG_M,A_R0},{HEX_8,HEX_4,REG_M,IMM_4}},
+	{"mov.b",{A_DISP_GBR,A_R0},{HEX_C,HEX_4,IMM_8}},
+	{"mov.b",{A_IND_R0_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_C}},
+	{"mov.b",{A_INC_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_4}},
+	{"mov.b",{A_IND_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_0}},
+	{"mov.b",{A_R0,A_DISP_REG_M},{HEX_8,HEX_0,REG_M,IMM_4}},
+	{"mov.b",{A_R0,A_DISP_GBR},{HEX_C,HEX_0,IMM_8}},
+	{"mov.l",{ A_REG_M,A_DISP_REG_N},{HEX_1,REG_N,REG_M,IMM_4BY4}},
+	{"mov.l",{ A_REG_M,A_IND_R0_REG_N},{HEX_0,REG_N,REG_M,HEX_6}},
+	{"mov.l",{ A_REG_M,A_DEC_N},{HEX_2,REG_N,REG_M,HEX_6}},
+	{"mov.l",{ A_REG_M,A_IND_N},{HEX_2,REG_N,REG_M,HEX_2}},
+	{"mov.l",{A_DISP_REG_M,A_REG_N},{HEX_5,REG_N,REG_M,IMM_4BY4}},
+	{"mov.l",{A_DISP_GBR,A_R0},{HEX_C,HEX_6,IMM_8BY4}},
+	{"mov.l",{A_DISP_PC,A_REG_N},{HEX_D,REG_N,PCRELIMM_8BY4}},
+	{"mov.l",{A_IND_R0_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_E}},
+	{"mov.l",{A_INC_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_6}},
+	{"mov.l",{A_IND_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_2}},
+	{"mov.l",{A_R0,A_DISP_GBR},{HEX_C,HEX_2,IMM_8BY4}},
+	{"mov.w",{ A_REG_M,A_IND_R0_REG_N},{HEX_0,REG_N,REG_M,HEX_5}},
+	{"mov.w",{ A_REG_M,A_DEC_N},{HEX_2,REG_N,REG_M,HEX_5}},
+	{"mov.w",{ A_REG_M,A_IND_N},{HEX_2,REG_N,REG_M,HEX_1}},
+	{"mov.w",{A_DISP_REG_M,A_R0},{HEX_8,HEX_5,REG_M,IMM_4BY2}},
+	{"mov.w",{A_DISP_GBR,A_R0},{HEX_C,HEX_5,IMM_8BY2}},
+	{"mov.w",{A_DISP_PC,A_REG_N},{HEX_9,REG_N,PCRELIMM_8BY2}},
+	{"mov.w",{A_IND_R0_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_D}},
+	{"mov.w",{A_INC_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_5}},
+	{"mov.w",{A_IND_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_1}},
+	{"mov.w",{A_R0,A_DISP_REG_M},{HEX_8,HEX_1,REG_M,IMM_4BY2}},
+	{"mov.w",{A_R0,A_DISP_GBR},{HEX_C,HEX_1,IMM_8BY2}},
+	{"mova",{A_DISP_PC,A_R0},{HEX_C,HEX_7,PCRELIMM_8BY4}},
+	{"movca.l",{A_R0,A_IND_N},{HEX_0,REG_N,HEX_C,HEX_3}},
+	{"movt",{A_REG_N},{HEX_0,REG_N,HEX_2,HEX_9}},
+	{"muls",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_F}},
+	{"mul.l",{ A_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_7}},
+	{"mulu",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_E}},
+	{"neg",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_B}},
+	{"negc",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_A}},
+	{"nop",{0},{HEX_0,HEX_0,HEX_0,HEX_9}},
+	{"not",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_7}},
+	{"ocbi",{A_IND_N},{HEX_0,REG_N,HEX_9,HEX_3}},
+	{"ocbp",{A_IND_N},{HEX_0,REG_N,HEX_A,HEX_3}},
+	{"ocbwb",{A_IND_N},{HEX_0,REG_N,HEX_B,HEX_3}},
+	{"or",{A_IMM,A_R0},{HEX_C,HEX_B,IMM_8}},
+	{"or",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_B}},
+	{"or.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_F,IMM_8}},
+	{"pref",{A_IND_N},{HEX_0,REG_N,HEX_8,HEX_3}},
+	{"rotcl",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_4}},
+	{"rotcr",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_5}},
+	{"rotl",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_4}},
+	{"rotr",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_5}},
+	{"rte",{0},{HEX_0,HEX_0,HEX_2,HEX_B}},
+	{"rts",{0},{HEX_0,HEX_0,HEX_0,HEX_B}},
+	{"sets",{0},{HEX_0,HEX_0,HEX_5,HEX_8}},
+	{"sett",{0},{HEX_0,HEX_0,HEX_1,HEX_8}},
+	{"shad",{ A_REG_M,A_REG_N},{HEX_4,REG_N,REG_M,HEX_C}},
+	{"shld",{ A_REG_M,A_REG_N},{HEX_4,REG_N,REG_M,HEX_D}},
+	{"shal",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_0}},
+	{"shar",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_1}},
+	{"shll",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_0}},
+	{"shll16",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_8}},
+	{"shll2",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_8}},
+	{"shll8",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_8}},
+	{"shlr",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_1}},
+	{"shlr16",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_9}},
+	{"shlr2",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_9}},
+	{"shlr8",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_9}},
+	{"sleep",{0},{HEX_0,HEX_0,HEX_1,HEX_B}},
+	{"stc",{A_SR,A_REG_N},{HEX_0,REG_N,HEX_0,HEX_2}},
+	{"stc",{A_GBR,A_REG_N},{HEX_0,REG_N,HEX_1,HEX_2}},
+	{"stc",{A_VBR,A_REG_N},{HEX_0,REG_N,HEX_2,HEX_2}},
+	{"stc",{A_SSR,A_REG_N},{HEX_0,REG_N,HEX_3,HEX_2}},
+	{"stc",{A_SPC,A_REG_N},{HEX_0,REG_N,HEX_4,HEX_2}},
+	{"stc",{A_SGR,A_REG_N},{HEX_0,REG_N,HEX_6,HEX_2}},
+	{"stc",{A_DBR,A_REG_N},{HEX_0,REG_N,HEX_7,HEX_2}},
+	{"stc",{A_REG_B,A_REG_N},{HEX_0,REG_N,REG_B,HEX_2}},
+	{"stc.l",{A_SR,A_DEC_N},{HEX_4,REG_N,HEX_0,HEX_3}},
+	{"stc.l",{A_GBR,A_DEC_N},{HEX_4,REG_N,HEX_1,HEX_3}},
+	{"stc.l",{A_VBR,A_DEC_N},{HEX_4,REG_N,HEX_2,HEX_3}},
+	{"stc.l",{A_SSR,A_DEC_N},{HEX_4,REG_N,HEX_3,HEX_3}},
+	{"stc.l",{A_SPC,A_DEC_N},{HEX_4,REG_N,HEX_4,HEX_3}},
+	{"stc.l",{A_SGR,A_DEC_N},{HEX_4,REG_N,HEX_6,HEX_3}},
+	{"stc.l",{A_DBR,A_DEC_N},{HEX_4,REG_N,HEX_7,HEX_3}},
+	{"stc.l",{A_REG_B,A_DEC_N},{HEX_4,REG_N,REG_B,HEX_3}},
+	{"sts",{A_MACH,A_REG_N},{HEX_0,REG_N,HEX_0,HEX_A}},
+	{"sts",{A_MACL,A_REG_N},{HEX_0,REG_N,HEX_1,HEX_A}},
+	{"sts",{A_PR,A_REG_N},{HEX_0,REG_N,HEX_2,HEX_A}},
+	{"sts",{FPUL_M,A_REG_N},{HEX_0,REG_N,HEX_5,HEX_A}},
+	{"sts",{FPSCR_M,A_REG_N},{HEX_0,REG_N,HEX_6,HEX_A}},
+	{"sts.l",{A_MACH,A_DEC_N},{HEX_4,REG_N,HEX_0,HEX_2}},
+	{"sts.l",{A_MACL,A_DEC_N},{HEX_4,REG_N,HEX_1,HEX_2}},
+	{"sts.l",{A_PR,A_DEC_N},{HEX_4,REG_N,HEX_2,HEX_2}},
+	{"sts.l",{FPUL_M,A_DEC_N},{HEX_4,REG_N,HEX_5,HEX_2}},
+	{"sts.l",{FPSCR_M,A_DEC_N},{HEX_4,REG_N,HEX_6,HEX_2}},
+	{"sub",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_8}},
+	{"subc",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_A}},
+	{"subv",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_B}},
+	{"swap.b",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_8}},
+	{"swap.w",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_9}},
+	{"tas.b",{A_IND_N},{HEX_4,REG_N,HEX_1,HEX_B}},
+	{"trapa",{A_IMM},{HEX_C,HEX_3,IMM_8}},
+	{"tst",{A_IMM,A_R0},{HEX_C,HEX_8,IMM_8}},
+	{"tst",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_8}},
+	{"tst.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_C,IMM_8}},
+	{"xor",{A_IMM,A_R0},{HEX_C,HEX_A,IMM_8}},
+	{"xor",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_A}},
+	{"xor.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_E,IMM_8}},
+	{"xtrct",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_D}},
+	{"mul.l",{ A_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_7}},
+	{"dt",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_0}},
+	{"dmuls.l",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_D}},
+	{"dmulu.l",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_5}},
+	{"mac.l",{A_INC_M,A_INC_N},{HEX_0,REG_N,REG_M,HEX_F}},
+	{"braf",{A_REG_N},{HEX_0,REG_N,HEX_2,HEX_3}},
+	{"bsrf",{A_REG_N},{HEX_0,REG_N,HEX_0,HEX_3}},
+	{"fabs",{FD_REG_N},{HEX_F,REG_N,HEX_5,HEX_D}},
+	{"fadd",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_0}},
+	{"fadd",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_0}},
+	{"fcmp/eq",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_4}},
+	{"fcmp/eq",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_4}},
+	{"fcmp/gt",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_5}},
+	{"fcmp/gt",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_5}},
+	{"fcnvds",{D_REG_N,FPUL_M},{HEX_F,REG_N,HEX_B,HEX_D}},
+	{"fcnvsd",{FPUL_M,D_REG_N},{HEX_F,REG_N,HEX_A,HEX_D}},
+	{"fdiv",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_3}},
+	{"fdiv",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_3}},
+	{"fipr",{V_REG_M,V_REG_N},{HEX_F,REG_NM,HEX_E,HEX_D}},
+	{"fldi0",{F_REG_N},{HEX_F,REG_N,HEX_8,HEX_D}},
+	{"fldi1",{F_REG_N},{HEX_F,REG_N,HEX_9,HEX_D}},
+	{"flds",{F_REG_N,FPUL_M},{HEX_F,REG_N,HEX_1,HEX_D}},
+	{"float",{FPUL_M,FD_REG_N},{HEX_F,REG_N,HEX_2,HEX_D}},
+	{"fmac",{F_FR0,F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_E}},
+	{"fmov",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_C}},
+	{"fmov",{DX_REG_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_C}},
+	{"fmov",{A_IND_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
+	{"fmov",{A_IND_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
+	{"fmov",{F_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
+	{"fmov",{DX_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
+	{"fmov",{A_INC_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
+	{"fmov",{A_INC_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
+	{"fmov",{F_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
+	{"fmov",{DX_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
+	{"fmov",{A_IND_R0_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
+	{"fmov",{A_IND_R0_REG_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
+	{"fmov",{F_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
+	{"fmov",{DX_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
+	{"fmov.d",{A_IND_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
+	{"fmov.d",{DX_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
+	{"fmov.d",{A_INC_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
+	{"fmov.d",{DX_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
+	{"fmov.d",{A_IND_R0_REG_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
+	{"fmov.d",{DX_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
+	{"fmov.s",{A_IND_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
+	{"fmov.s",{F_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
+	{"fmov.s",{A_INC_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
+	{"fmov.s",{F_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
+	{"fmov.s",{A_IND_R0_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
+	{"fmov.s",{F_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
+	{"fmul",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_2}},
+	{"fmul",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_2}},
+	{"fneg",{FD_REG_N},{HEX_F,REG_N,HEX_4,HEX_D}},
+	{"frchg",{0},{HEX_F,HEX_B,HEX_F,HEX_D}},
+	{"fschg",{0},{HEX_F,HEX_3,HEX_F,HEX_D}},
+	{"fsqrt",{FD_REG_N},{HEX_F,REG_N,HEX_6,HEX_D}},
+	{"fsts",{FPUL_M,F_REG_N},{HEX_F,REG_N,HEX_0,HEX_D}},
+	{"fsub",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_1}},
+	{"fsub",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_1}},
+	{"ftrc",{FD_REG_N,FPUL_M},{HEX_F,REG_N,HEX_3,HEX_D}},
+	{"ftrv",{XMTRX_M4,V_REG_N},{HEX_F,REG_NM,HEX_F,HEX_D}},
+	{ 0 },
+};
+
+static void print_sh_insn(u32 memaddr, u16 insn)
+{
+	int relmask = ~0;
+	int nibs[4] = { (insn >> 12) & 0xf, (insn >> 8) & 0xf, (insn >> 4) & 0xf, insn & 0xf};
+	int lastsp;
+	struct sh_opcode_info *op = sh_table;
+
+	for (; op->name; op++) {
+		int n;
+		int imm = 0;
+		int rn = 0;
+		int rm = 0;
+		int rb = 0;
+		int disp_pc;
+		int disp_pc_addr = 0;
+
+		for (n = 0; n < 4; n++) {
+			int i = op->nibbles[n];
+
+			if (i < 16) {
+				if (nibs[n] == i)
+					continue;
+				goto fail;
+			}
+			switch (i) {
+			case BRANCH_8:
+				imm = (nibs[2] << 4) | (nibs[3]);
+				if (imm & 0x80)
+					imm |= ~0xff;
+				imm = ((char)imm) * 2 + 4 ;
+				goto ok;
+			case BRANCH_12:
+				imm = ((nibs[1]) << 8) | (nibs[2] << 4) | (nibs[3]);
+				if (imm & 0x800)
+					imm |= ~0xfff;
+				imm = imm * 2 + 4;
+				goto ok;
+			case IMM_4:
+				imm = nibs[3];
+				goto ok;
+			case IMM_4BY2:
+				imm = nibs[3] <<1;
+				goto ok;
+			case IMM_4BY4:
+				imm = nibs[3] <<2;
+				goto ok;
+			case IMM_8:
+				imm = (nibs[2] << 4) | nibs[3];
+				goto ok;
+			case PCRELIMM_8BY2:
+				imm = ((nibs[2] << 4) | nibs[3]) <<1;
+				relmask = ~1;
+				goto ok;
+			case PCRELIMM_8BY4:
+				imm = ((nibs[2] << 4) | nibs[3]) <<2;
+				relmask = ~3;
+				goto ok;
+			case IMM_8BY2:
+				imm = ((nibs[2] << 4) | nibs[3]) <<1;
+				goto ok;
+			case IMM_8BY4:
+				imm = ((nibs[2] << 4) | nibs[3]) <<2;
+				goto ok;
+			case DISP_8:
+				imm = (nibs[2] << 4) | (nibs[3]);
+				goto ok;
+			case DISP_4:
+				imm = nibs[3];
+				goto ok;
+			case REG_N:
+				rn = nibs[n];
+				break;
+			case REG_M:
+				rm = nibs[n];
+				break;
+			case REG_NM:
+				rn = (nibs[n] & 0xc) >> 2;
+				rm = (nibs[n] & 0x3);
+				break;
+			case REG_B:
+				rb = nibs[n] & 0x07;
+				break;
+			default:
+				return;
+			}
+		}
+
+	ok:
+		printk("%-8s  ", op->name);
+		lastsp = (op->arg[0] == A_END);
+		disp_pc = 0;
+		for (n = 0; n < 6 && op->arg[n] != A_END; n++) {
+			if (n && op->arg[1] != A_END)
+				printk(", ");
+			switch (op->arg[n]) {
+			case A_IMM:
+				printk("#%d", (char)(imm));
+				break;
+			case A_R0:
+				printk("r0");
+				break;
+			case A_REG_N:
+				printk("r%d", rn);
+				break;
+			case A_INC_N:
+				printk("@r%d+", rn);
+				break;
+			case A_DEC_N:
+				printk("@-r%d", rn);
+				break;
+			case A_IND_N:
+				printk("@r%d", rn);
+				break;
+			case A_DISP_REG_N:
+				printk("@(%d,r%d)", imm, rn);
+				break;
+			case A_REG_M:
+				printk("r%d", rm);
+				break;
+			case A_INC_M:
+				printk("@r%d+", rm);
+				break;
+			case A_DEC_M:
+				printk("@-r%d", rm);
+				break;
+			case A_IND_M:
+				printk("@r%d", rm);
+				break;
+			case A_DISP_REG_M:
+				printk("@(%d,r%d)", imm, rm);
+				break;
+			case A_REG_B:
+				printk("r%d_bank", rb);
+				break;
+			case A_DISP_PC:
+				disp_pc = 1;
+				disp_pc_addr = imm + 4 + (memaddr & relmask);
+				printk("%08x <%pS>", disp_pc_addr,
+				       (void *)disp_pc_addr);
+				break;
+			case A_IND_R0_REG_N:
+				printk("@(r0,r%d)", rn);
+				break;
+			case A_IND_R0_REG_M:
+				printk("@(r0,r%d)", rm);
+				break;
+			case A_DISP_GBR:
+				printk("@(%d,gbr)",imm);
+				break;
+			case A_R0_GBR:
+				printk("@(r0,gbr)");
+				break;
+			case A_BDISP12:
+			case A_BDISP8:
+				printk("%08x", imm + memaddr);
+				break;
+			case A_SR:
+				printk("sr");
+				break;
+			case A_GBR:
+				printk("gbr");
+				break;
+			case A_VBR:
+				printk("vbr");
+				break;
+			case A_SSR:
+				printk("ssr");
+				break;
+			case A_SPC:
+				printk("spc");
+				break;
+			case A_MACH:
+				printk("mach");
+				break;
+			case A_MACL:
+				printk("macl");
+				break;
+			case A_PR:
+				printk("pr");
+				break;
+			case A_SGR:
+				printk("sgr");
+				break;
+			case A_DBR:
+				printk("dbr");
+				break;
+			case FD_REG_N:
+				if (0)
+					goto d_reg_n;
+			case F_REG_N:
+				printk("fr%d", rn);
+				break;
+			case F_REG_M:
+				printk("fr%d", rm);
+				break;
+			case DX_REG_N:
+				if (rn & 1) {
+					printk("xd%d", rn & ~1);
+					break;
+				}
+			d_reg_n:
+			case D_REG_N:
+				printk("dr%d", rn);
+				break;
+			case DX_REG_M:
+				if (rm & 1) {
+					printk("xd%d", rm & ~1);
+					break;
+				}
+			case D_REG_M:
+				printk("dr%d", rm);
+				break;
+			case FPSCR_M:
+			case FPSCR_N:
+				printk("fpscr");
+				break;
+			case FPUL_M:
+			case FPUL_N:
+				printk("fpul");
+				break;
+			case F_FR0:
+				printk("fr0");
+				break;
+			case V_REG_N:
+				printk("fv%d", rn*4);
+				break;
+			case V_REG_M:
+				printk("fv%d", rm*4);
+				break;
+			case XMTRX_M4:
+				printk("xmtrx");
+				break;
+			default:
+				return;
+			}
+		}
+
+		if (disp_pc && strcmp(op->name, "mova") != 0) {
+			u32 val;
+
+			if (relmask == ~1)
+				__get_user(val, (u16 *)disp_pc_addr);
+			else
+				__get_user(val, (u32 *)disp_pc_addr);
+
+			printk("  ! %08x <%pS>", val, (void *)val);
+		}
+
+		return;
+	fail:
+		;
+
+	}
+
+	printk(".word 0x%x%x%x%x", nibs[0], nibs[1], nibs[2], nibs[3]);
+}
+
+void show_code(struct pt_regs *regs)
+{
+	unsigned short *pc = (unsigned short *)regs->pc;
+	long i;
+
+	if (regs->pc & 0x1)
+		return;
+
+	printk("Code:\n");
+
+	for (i = -3 ; i < 6 ; i++) {
+		unsigned short insn;
+
+		if (__get_user(insn, pc + i)) {
+			printk(" (Bad address in pc)\n");
+			break;
+		}
+
+		printk("%s%08lx:  ", (i ? "  ": "->"), (unsigned long)(pc + i));
+		print_sh_insn((unsigned long)(pc + i), insn);
+		printk("\n");
+	}
+
+	printk("\n");
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/dma-nommu.c b/src/kernel/linux/v4.14/arch/sh/kernel/dma-nommu.c
new file mode 100644
index 0000000..d24c707
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/dma-nommu.c
@@ -0,0 +1,85 @@
+/*
+ * DMA mapping support for platforms lacking IOMMUs.
+ *
+ * Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+
+static dma_addr_t nommu_map_page(struct device *dev, struct page *page,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction dir,
+				 unsigned long attrs)
+{
+	dma_addr_t addr = page_to_phys(page) + offset;
+
+	WARN_ON(size == 0);
+
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		dma_cache_sync(dev, page_address(page) + offset, size, dir);
+
+	return addr;
+}
+
+static int nommu_map_sg(struct device *dev, struct scatterlist *sg,
+			int nents, enum dma_data_direction dir,
+			unsigned long attrs)
+{
+	struct scatterlist *s;
+	int i;
+
+	WARN_ON(nents == 0 || sg[0].length == 0);
+
+	for_each_sg(sg, s, nents, i) {
+		BUG_ON(!sg_page(s));
+
+		if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+			dma_cache_sync(dev, sg_virt(s), s->length, dir);
+
+		s->dma_address = sg_phys(s);
+		s->dma_length = s->length;
+	}
+
+	return nents;
+}
+
+#ifdef CONFIG_DMA_NONCOHERENT
+static void nommu_sync_single(struct device *dev, dma_addr_t addr,
+			      size_t size, enum dma_data_direction dir)
+{
+	dma_cache_sync(dev, phys_to_virt(addr), size, dir);
+}
+
+static void nommu_sync_sg(struct device *dev, struct scatterlist *sg,
+			  int nelems, enum dma_data_direction dir)
+{
+	struct scatterlist *s;
+	int i;
+
+	for_each_sg(sg, s, nelems, i)
+		dma_cache_sync(dev, sg_virt(s), s->length, dir);
+}
+#endif
+
+const struct dma_map_ops nommu_dma_ops = {
+	.alloc			= dma_generic_alloc_coherent,
+	.free			= dma_generic_free_coherent,
+	.map_page		= nommu_map_page,
+	.map_sg			= nommu_map_sg,
+#ifdef CONFIG_DMA_NONCOHERENT
+	.sync_single_for_device	= nommu_sync_single,
+	.sync_sg_for_device	= nommu_sync_sg,
+#endif
+	.is_phys		= 1,
+};
+
+void __init no_iommu_init(void)
+{
+	if (dma_ops)
+		return;
+	dma_ops = &nommu_dma_ops;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/dumpstack.c b/src/kernel/linux/v4.14/arch/sh/kernel/dumpstack.c
new file mode 100644
index 0000000..b564b1e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/dumpstack.c
@@ -0,0 +1,162 @@
+/*
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
+ *  Copyright (C) 2009  Matt Fleming
+ *  Copyright (C) 2002 - 2012  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kallsyms.h>
+#include <linux/ftrace.h>
+#include <linux/debug_locks.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task_stack.h>
+#include <linux/kdebug.h>
+#include <linux/export.h>
+#include <linux/uaccess.h>
+#include <asm/unwinder.h>
+#include <asm/stacktrace.h>
+
+void dump_mem(const char *str, unsigned long bottom, unsigned long top)
+{
+	unsigned long p;
+	int i;
+
+	printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
+
+	for (p = bottom & ~31; p < top; ) {
+		printk("%04lx: ", p & 0xffff);
+
+		for (i = 0; i < 8; i++, p += 4) {
+			unsigned int val;
+
+			if (p < bottom || p >= top)
+				printk("         ");
+			else {
+				if (__get_user(val, (unsigned int __user *)p)) {
+					printk("\n");
+					return;
+				}
+				printk("%08x ", val);
+			}
+		}
+		printk("\n");
+	}
+}
+
+void printk_address(unsigned long address, int reliable)
+{
+	printk(" [<%p>] %s%pS\n", (void *) address,
+			reliable ? "" : "? ", (void *) address);
+}
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static void
+print_ftrace_graph_addr(unsigned long addr, void *data,
+			const struct stacktrace_ops *ops,
+			struct thread_info *tinfo, int *graph)
+{
+	struct task_struct *task = tinfo->task;
+	unsigned long ret_addr;
+	int index = task->curr_ret_stack;
+
+	if (addr != (unsigned long)return_to_handler)
+		return;
+
+	if (!task->ret_stack || index < *graph)
+		return;
+
+	index -= *graph;
+	ret_addr = task->ret_stack[index].ret;
+
+	ops->address(data, ret_addr, 1);
+
+	(*graph)++;
+}
+#else
+static inline void
+print_ftrace_graph_addr(unsigned long addr, void *data,
+			const struct stacktrace_ops *ops,
+			struct thread_info *tinfo, int *graph)
+{ }
+#endif
+
+void
+stack_reader_dump(struct task_struct *task, struct pt_regs *regs,
+		  unsigned long *sp, const struct stacktrace_ops *ops,
+		  void *data)
+{
+	struct thread_info *context;
+	int graph = 0;
+
+	context = (struct thread_info *)
+		((unsigned long)sp & (~(THREAD_SIZE - 1)));
+
+	while (!kstack_end(sp)) {
+		unsigned long addr = *sp++;
+
+		if (__kernel_text_address(addr)) {
+			ops->address(data, addr, 1);
+
+			print_ftrace_graph_addr(addr, data, ops,
+						context, &graph);
+		}
+	}
+}
+
+static int print_trace_stack(void *data, char *name)
+{
+	printk("%s <%s> ", (char *)data, name);
+	return 0;
+}
+
+/*
+ * Print one address/symbol entries per line.
+ */
+static void print_trace_address(void *data, unsigned long addr, int reliable)
+{
+	printk("%s", (char *)data);
+	printk_address(addr, reliable);
+}
+
+static const struct stacktrace_ops print_trace_ops = {
+	.stack = print_trace_stack,
+	.address = print_trace_address,
+};
+
+void show_trace(struct task_struct *tsk, unsigned long *sp,
+		struct pt_regs *regs)
+{
+	if (regs && user_mode(regs))
+		return;
+
+	printk("\nCall trace:\n");
+
+	unwind_stack(tsk, regs, sp, &print_trace_ops, "");
+
+	printk("\n");
+
+	if (!tsk)
+		tsk = current;
+
+	debug_show_held_locks(tsk);
+}
+
+void show_stack(struct task_struct *tsk, unsigned long *sp)
+{
+	unsigned long stack;
+
+	if (!tsk)
+		tsk = current;
+	if (tsk == current)
+		sp = (unsigned long *)current_stack_pointer;
+	else
+		sp = (unsigned long *)tsk->thread.sp;
+
+	stack = (unsigned long)sp;
+	dump_mem("Stack: ", stack, THREAD_SIZE +
+		 (unsigned long)task_stack_page(tsk));
+	show_trace(tsk, sp, NULL);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/dwarf.c b/src/kernel/linux/v4.14/arch/sh/kernel/dwarf.c
new file mode 100644
index 0000000..1a25266
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/dwarf.c
@@ -0,0 +1,1208 @@
+/*
+ * Copyright (C) 2009 Matt Fleming <matt@console-pimps.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This is an implementation of a DWARF unwinder. Its main purpose is
+ * for generating stacktrace information. Based on the DWARF 3
+ * specification from http://www.dwarfstd.org.
+ *
+ * TODO:
+ *	- DWARF64 doesn't work.
+ *	- Registers with DWARF_VAL_OFFSET rules aren't handled properly.
+ */
+
+/* #define DEBUG */
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/mempool.h>
+#include <linux/mm.h>
+#include <linux/elf.h>
+#include <linux/ftrace.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <asm/dwarf.h>
+#include <asm/unwinder.h>
+#include <asm/sections.h>
+#include <asm/unaligned.h>
+#include <asm/stacktrace.h>
+
+/* Reserve enough memory for two stack frames */
+#define DWARF_FRAME_MIN_REQ	2
+/* ... with 4 registers per frame. */
+#define DWARF_REG_MIN_REQ	(DWARF_FRAME_MIN_REQ * 4)
+
+static struct kmem_cache *dwarf_frame_cachep;
+static mempool_t *dwarf_frame_pool;
+
+static struct kmem_cache *dwarf_reg_cachep;
+static mempool_t *dwarf_reg_pool;
+
+static struct rb_root cie_root;
+static DEFINE_SPINLOCK(dwarf_cie_lock);
+
+static struct rb_root fde_root;
+static DEFINE_SPINLOCK(dwarf_fde_lock);
+
+static struct dwarf_cie *cached_cie;
+
+static unsigned int dwarf_unwinder_ready;
+
+/**
+ *	dwarf_frame_alloc_reg - allocate memory for a DWARF register
+ *	@frame: the DWARF frame whose list of registers we insert on
+ *	@reg_num: the register number
+ *
+ *	Allocate space for, and initialise, a dwarf reg from
+ *	dwarf_reg_pool and insert it onto the (unsorted) linked-list of
+ *	dwarf registers for @frame.
+ *
+ *	Return the initialised DWARF reg.
+ */
+static struct dwarf_reg *dwarf_frame_alloc_reg(struct dwarf_frame *frame,
+					       unsigned int reg_num)
+{
+	struct dwarf_reg *reg;
+
+	reg = mempool_alloc(dwarf_reg_pool, GFP_ATOMIC);
+	if (!reg) {
+		printk(KERN_WARNING "Unable to allocate a DWARF register\n");
+		/*
+		 * Let's just bomb hard here, we have no way to
+		 * gracefully recover.
+		 */
+		UNWINDER_BUG();
+	}
+
+	reg->number = reg_num;
+	reg->addr = 0;
+	reg->flags = 0;
+
+	list_add(&reg->link, &frame->reg_list);
+
+	return reg;
+}
+
+static void dwarf_frame_free_regs(struct dwarf_frame *frame)
+{
+	struct dwarf_reg *reg, *n;
+
+	list_for_each_entry_safe(reg, n, &frame->reg_list, link) {
+		list_del(&reg->link);
+		mempool_free(reg, dwarf_reg_pool);
+	}
+}
+
+/**
+ *	dwarf_frame_reg - return a DWARF register
+ *	@frame: the DWARF frame to search in for @reg_num
+ *	@reg_num: the register number to search for
+ *
+ *	Lookup and return the dwarf reg @reg_num for this frame. Return
+ *	NULL if @reg_num is an register invalid number.
+ */
+static struct dwarf_reg *dwarf_frame_reg(struct dwarf_frame *frame,
+					 unsigned int reg_num)
+{
+	struct dwarf_reg *reg;
+
+	list_for_each_entry(reg, &frame->reg_list, link) {
+		if (reg->number == reg_num)
+			return reg;
+	}
+
+	return NULL;
+}
+
+/**
+ *	dwarf_read_addr - read dwarf data
+ *	@src: source address of data
+ *	@dst: destination address to store the data to
+ *
+ *	Read 'n' bytes from @src, where 'n' is the size of an address on
+ *	the native machine. We return the number of bytes read, which
+ *	should always be 'n'. We also have to be careful when reading
+ *	from @src and writing to @dst, because they can be arbitrarily
+ *	aligned. Return 'n' - the number of bytes read.
+ */
+static inline int dwarf_read_addr(unsigned long *src, unsigned long *dst)
+{
+	u32 val = get_unaligned(src);
+	put_unaligned(val, dst);
+	return sizeof(unsigned long *);
+}
+
+/**
+ *	dwarf_read_uleb128 - read unsigned LEB128 data
+ *	@addr: the address where the ULEB128 data is stored
+ *	@ret: address to store the result
+ *
+ *	Decode an unsigned LEB128 encoded datum. The algorithm is taken
+ *	from Appendix C of the DWARF 3 spec. For information on the
+ *	encodings refer to section "7.6 - Variable Length Data". Return
+ *	the number of bytes read.
+ */
+static inline unsigned long dwarf_read_uleb128(char *addr, unsigned int *ret)
+{
+	unsigned int result;
+	unsigned char byte;
+	int shift, count;
+
+	result = 0;
+	shift = 0;
+	count = 0;
+
+	while (1) {
+		byte = __raw_readb(addr);
+		addr++;
+		count++;
+
+		result |= (byte & 0x7f) << shift;
+		shift += 7;
+
+		if (!(byte & 0x80))
+			break;
+	}
+
+	*ret = result;
+
+	return count;
+}
+
+/**
+ *	dwarf_read_leb128 - read signed LEB128 data
+ *	@addr: the address of the LEB128 encoded data
+ *	@ret: address to store the result
+ *
+ *	Decode signed LEB128 data. The algorithm is taken from Appendix
+ *	C of the DWARF 3 spec. Return the number of bytes read.
+ */
+static inline unsigned long dwarf_read_leb128(char *addr, int *ret)
+{
+	unsigned char byte;
+	int result, shift;
+	int num_bits;
+	int count;
+
+	result = 0;
+	shift = 0;
+	count = 0;
+
+	while (1) {
+		byte = __raw_readb(addr);
+		addr++;
+		result |= (byte & 0x7f) << shift;
+		shift += 7;
+		count++;
+
+		if (!(byte & 0x80))
+			break;
+	}
+
+	/* The number of bits in a signed integer. */
+	num_bits = 8 * sizeof(result);
+
+	if ((shift < num_bits) && (byte & 0x40))
+		result |= (-1 << shift);
+
+	*ret = result;
+
+	return count;
+}
+
+/**
+ *	dwarf_read_encoded_value - return the decoded value at @addr
+ *	@addr: the address of the encoded value
+ *	@val: where to write the decoded value
+ *	@encoding: the encoding with which we can decode @addr
+ *
+ *	GCC emits encoded address in the .eh_frame FDE entries. Decode
+ *	the value at @addr using @encoding. The decoded value is written
+ *	to @val and the number of bytes read is returned.
+ */
+static int dwarf_read_encoded_value(char *addr, unsigned long *val,
+				    char encoding)
+{
+	unsigned long decoded_addr = 0;
+	int count = 0;
+
+	switch (encoding & 0x70) {
+	case DW_EH_PE_absptr:
+		break;
+	case DW_EH_PE_pcrel:
+		decoded_addr = (unsigned long)addr;
+		break;
+	default:
+		pr_debug("encoding=0x%x\n", (encoding & 0x70));
+		UNWINDER_BUG();
+	}
+
+	if ((encoding & 0x07) == 0x00)
+		encoding |= DW_EH_PE_udata4;
+
+	switch (encoding & 0x0f) {
+	case DW_EH_PE_sdata4:
+	case DW_EH_PE_udata4:
+		count += 4;
+		decoded_addr += get_unaligned((u32 *)addr);
+		__raw_writel(decoded_addr, val);
+		break;
+	default:
+		pr_debug("encoding=0x%x\n", encoding);
+		UNWINDER_BUG();
+	}
+
+	return count;
+}
+
+/**
+ *	dwarf_entry_len - return the length of an FDE or CIE
+ *	@addr: the address of the entry
+ *	@len: the length of the entry
+ *
+ *	Read the initial_length field of the entry and store the size of
+ *	the entry in @len. We return the number of bytes read. Return a
+ *	count of 0 on error.
+ */
+static inline int dwarf_entry_len(char *addr, unsigned long *len)
+{
+	u32 initial_len;
+	int count;
+
+	initial_len = get_unaligned((u32 *)addr);
+	count = 4;
+
+	/*
+	 * An initial length field value in the range DW_LEN_EXT_LO -
+	 * DW_LEN_EXT_HI indicates an extension, and should not be
+	 * interpreted as a length. The only extension that we currently
+	 * understand is the use of DWARF64 addresses.
+	 */
+	if (initial_len >= DW_EXT_LO && initial_len <= DW_EXT_HI) {
+		/*
+		 * The 64-bit length field immediately follows the
+		 * compulsory 32-bit length field.
+		 */
+		if (initial_len == DW_EXT_DWARF64) {
+			*len = get_unaligned((u64 *)addr + 4);
+			count = 12;
+		} else {
+			printk(KERN_WARNING "Unknown DWARF extension\n");
+			count = 0;
+		}
+	} else
+		*len = initial_len;
+
+	return count;
+}
+
+/**
+ *	dwarf_lookup_cie - locate the cie
+ *	@cie_ptr: pointer to help with lookup
+ */
+static struct dwarf_cie *dwarf_lookup_cie(unsigned long cie_ptr)
+{
+	struct rb_node **rb_node = &cie_root.rb_node;
+	struct dwarf_cie *cie = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dwarf_cie_lock, flags);
+
+	/*
+	 * We've cached the last CIE we looked up because chances are
+	 * that the FDE wants this CIE.
+	 */
+	if (cached_cie && cached_cie->cie_pointer == cie_ptr) {
+		cie = cached_cie;
+		goto out;
+	}
+
+	while (*rb_node) {
+		struct dwarf_cie *cie_tmp;
+
+		cie_tmp = rb_entry(*rb_node, struct dwarf_cie, node);
+		BUG_ON(!cie_tmp);
+
+		if (cie_ptr == cie_tmp->cie_pointer) {
+			cie = cie_tmp;
+			cached_cie = cie_tmp;
+			goto out;
+		} else {
+			if (cie_ptr < cie_tmp->cie_pointer)
+				rb_node = &(*rb_node)->rb_left;
+			else
+				rb_node = &(*rb_node)->rb_right;
+		}
+	}
+
+out:
+	spin_unlock_irqrestore(&dwarf_cie_lock, flags);
+	return cie;
+}
+
+/**
+ *	dwarf_lookup_fde - locate the FDE that covers pc
+ *	@pc: the program counter
+ */
+struct dwarf_fde *dwarf_lookup_fde(unsigned long pc)
+{
+	struct rb_node **rb_node = &fde_root.rb_node;
+	struct dwarf_fde *fde = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dwarf_fde_lock, flags);
+
+	while (*rb_node) {
+		struct dwarf_fde *fde_tmp;
+		unsigned long tmp_start, tmp_end;
+
+		fde_tmp = rb_entry(*rb_node, struct dwarf_fde, node);
+		BUG_ON(!fde_tmp);
+
+		tmp_start = fde_tmp->initial_location;
+		tmp_end = fde_tmp->initial_location + fde_tmp->address_range;
+
+		if (pc < tmp_start) {
+			rb_node = &(*rb_node)->rb_left;
+		} else {
+			if (pc < tmp_end) {
+				fde = fde_tmp;
+				goto out;
+			} else
+				rb_node = &(*rb_node)->rb_right;
+		}
+	}
+
+out:
+	spin_unlock_irqrestore(&dwarf_fde_lock, flags);
+
+	return fde;
+}
+
+/**
+ *	dwarf_cfa_execute_insns - execute instructions to calculate a CFA
+ *	@insn_start: address of the first instruction
+ *	@insn_end: address of the last instruction
+ *	@cie: the CIE for this function
+ *	@fde: the FDE for this function
+ *	@frame: the instructions calculate the CFA for this frame
+ *	@pc: the program counter of the address we're interested in
+ *
+ *	Execute the Call Frame instruction sequence starting at
+ *	@insn_start and ending at @insn_end. The instructions describe
+ *	how to calculate the Canonical Frame Address of a stackframe.
+ *	Store the results in @frame.
+ */
+static int dwarf_cfa_execute_insns(unsigned char *insn_start,
+				   unsigned char *insn_end,
+				   struct dwarf_cie *cie,
+				   struct dwarf_fde *fde,
+				   struct dwarf_frame *frame,
+				   unsigned long pc)
+{
+	unsigned char insn;
+	unsigned char *current_insn;
+	unsigned int count, delta, reg, expr_len, offset;
+	struct dwarf_reg *regp;
+
+	current_insn = insn_start;
+
+	while (current_insn < insn_end && frame->pc <= pc) {
+		insn = __raw_readb(current_insn++);
+
+		/*
+		 * Firstly, handle the opcodes that embed their operands
+		 * in the instructions.
+		 */
+		switch (DW_CFA_opcode(insn)) {
+		case DW_CFA_advance_loc:
+			delta = DW_CFA_operand(insn);
+			delta *= cie->code_alignment_factor;
+			frame->pc += delta;
+			continue;
+			/* NOTREACHED */
+		case DW_CFA_offset:
+			reg = DW_CFA_operand(insn);
+			count = dwarf_read_uleb128(current_insn, &offset);
+			current_insn += count;
+			offset *= cie->data_alignment_factor;
+			regp = dwarf_frame_alloc_reg(frame, reg);
+			regp->addr = offset;
+			regp->flags |= DWARF_REG_OFFSET;
+			continue;
+			/* NOTREACHED */
+		case DW_CFA_restore:
+			reg = DW_CFA_operand(insn);
+			continue;
+			/* NOTREACHED */
+		}
+
+		/*
+		 * Secondly, handle the opcodes that don't embed their
+		 * operands in the instruction.
+		 */
+		switch (insn) {
+		case DW_CFA_nop:
+			continue;
+		case DW_CFA_advance_loc1:
+			delta = *current_insn++;
+			frame->pc += delta * cie->code_alignment_factor;
+			break;
+		case DW_CFA_advance_loc2:
+			delta = get_unaligned((u16 *)current_insn);
+			current_insn += 2;
+			frame->pc += delta * cie->code_alignment_factor;
+			break;
+		case DW_CFA_advance_loc4:
+			delta = get_unaligned((u32 *)current_insn);
+			current_insn += 4;
+			frame->pc += delta * cie->code_alignment_factor;
+			break;
+		case DW_CFA_offset_extended:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			count = dwarf_read_uleb128(current_insn, &offset);
+			current_insn += count;
+			offset *= cie->data_alignment_factor;
+			break;
+		case DW_CFA_restore_extended:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			break;
+		case DW_CFA_undefined:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			regp = dwarf_frame_alloc_reg(frame, reg);
+			regp->flags |= DWARF_UNDEFINED;
+			break;
+		case DW_CFA_def_cfa:
+			count = dwarf_read_uleb128(current_insn,
+						   &frame->cfa_register);
+			current_insn += count;
+			count = dwarf_read_uleb128(current_insn,
+						   &frame->cfa_offset);
+			current_insn += count;
+
+			frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
+			break;
+		case DW_CFA_def_cfa_register:
+			count = dwarf_read_uleb128(current_insn,
+						   &frame->cfa_register);
+			current_insn += count;
+			frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
+			break;
+		case DW_CFA_def_cfa_offset:
+			count = dwarf_read_uleb128(current_insn, &offset);
+			current_insn += count;
+			frame->cfa_offset = offset;
+			break;
+		case DW_CFA_def_cfa_expression:
+			count = dwarf_read_uleb128(current_insn, &expr_len);
+			current_insn += count;
+
+			frame->cfa_expr = current_insn;
+			frame->cfa_expr_len = expr_len;
+			current_insn += expr_len;
+
+			frame->flags |= DWARF_FRAME_CFA_REG_EXP;
+			break;
+		case DW_CFA_offset_extended_sf:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			count = dwarf_read_leb128(current_insn, &offset);
+			current_insn += count;
+			offset *= cie->data_alignment_factor;
+			regp = dwarf_frame_alloc_reg(frame, reg);
+			regp->flags |= DWARF_REG_OFFSET;
+			regp->addr = offset;
+			break;
+		case DW_CFA_val_offset:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			count = dwarf_read_leb128(current_insn, &offset);
+			offset *= cie->data_alignment_factor;
+			regp = dwarf_frame_alloc_reg(frame, reg);
+			regp->flags |= DWARF_VAL_OFFSET;
+			regp->addr = offset;
+			break;
+		case DW_CFA_GNU_args_size:
+			count = dwarf_read_uleb128(current_insn, &offset);
+			current_insn += count;
+			break;
+		case DW_CFA_GNU_negative_offset_extended:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			count = dwarf_read_uleb128(current_insn, &offset);
+			offset *= cie->data_alignment_factor;
+
+			regp = dwarf_frame_alloc_reg(frame, reg);
+			regp->flags |= DWARF_REG_OFFSET;
+			regp->addr = -offset;
+			break;
+		default:
+			pr_debug("unhandled DWARF instruction 0x%x\n", insn);
+			UNWINDER_BUG();
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *	dwarf_free_frame - free the memory allocated for @frame
+ *	@frame: the frame to free
+ */
+void dwarf_free_frame(struct dwarf_frame *frame)
+{
+	dwarf_frame_free_regs(frame);
+	mempool_free(frame, dwarf_frame_pool);
+}
+
+extern void ret_from_irq(void);
+
+/**
+ *	dwarf_unwind_stack - unwind the stack
+ *
+ *	@pc: address of the function to unwind
+ *	@prev: struct dwarf_frame of the previous stackframe on the callstack
+ *
+ *	Return a struct dwarf_frame representing the most recent frame
+ *	on the callstack. Each of the lower (older) stack frames are
+ *	linked via the "prev" member.
+ */
+struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
+				       struct dwarf_frame *prev)
+{
+	struct dwarf_frame *frame;
+	struct dwarf_cie *cie;
+	struct dwarf_fde *fde;
+	struct dwarf_reg *reg;
+	unsigned long addr;
+
+	/*
+	 * If we've been called in to before initialization has
+	 * completed, bail out immediately.
+	 */
+	if (!dwarf_unwinder_ready)
+		return NULL;
+
+	/*
+	 * If we're starting at the top of the stack we need get the
+	 * contents of a physical register to get the CFA in order to
+	 * begin the virtual unwinding of the stack.
+	 *
+	 * NOTE: the return address is guaranteed to be setup by the
+	 * time this function makes its first function call.
+	 */
+	if (!pc || !prev)
+		pc = (unsigned long)current_text_addr();
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/*
+	 * If our stack has been patched by the function graph tracer
+	 * then we might see the address of return_to_handler() where we
+	 * expected to find the real return address.
+	 */
+	if (pc == (unsigned long)&return_to_handler) {
+		int index = current->curr_ret_stack;
+
+		/*
+		 * We currently have no way of tracking how many
+		 * return_to_handler()'s we've seen. If there is more
+		 * than one patched return address on our stack,
+		 * complain loudly.
+		 */
+		WARN_ON(index > 0);
+
+		pc = current->ret_stack[index].ret;
+	}
+#endif
+
+	frame = mempool_alloc(dwarf_frame_pool, GFP_ATOMIC);
+	if (!frame) {
+		printk(KERN_ERR "Unable to allocate a dwarf frame\n");
+		UNWINDER_BUG();
+	}
+
+	INIT_LIST_HEAD(&frame->reg_list);
+	frame->flags = 0;
+	frame->prev = prev;
+	frame->return_addr = 0;
+
+	fde = dwarf_lookup_fde(pc);
+	if (!fde) {
+		/*
+		 * This is our normal exit path. There are two reasons
+		 * why we might exit here,
+		 *
+		 *	a) pc has no asscociated DWARF frame info and so
+		 *	we don't know how to unwind this frame. This is
+		 *	usually the case when we're trying to unwind a
+		 *	frame that was called from some assembly code
+		 *	that has no DWARF info, e.g. syscalls.
+		 *
+		 *	b) the DEBUG info for pc is bogus. There's
+		 *	really no way to distinguish this case from the
+		 *	case above, which sucks because we could print a
+		 *	warning here.
+		 */
+		goto bail;
+	}
+
+	cie = dwarf_lookup_cie(fde->cie_pointer);
+
+	frame->pc = fde->initial_location;
+
+	/* CIE initial instructions */
+	dwarf_cfa_execute_insns(cie->initial_instructions,
+				cie->instructions_end, cie, fde,
+				frame, pc);
+
+	/* FDE instructions */
+	dwarf_cfa_execute_insns(fde->instructions, fde->end, cie,
+				fde, frame, pc);
+
+	/* Calculate the CFA */
+	switch (frame->flags) {
+	case DWARF_FRAME_CFA_REG_OFFSET:
+		if (prev) {
+			reg = dwarf_frame_reg(prev, frame->cfa_register);
+			UNWINDER_BUG_ON(!reg);
+			UNWINDER_BUG_ON(reg->flags != DWARF_REG_OFFSET);
+
+			addr = prev->cfa + reg->addr;
+			frame->cfa = __raw_readl(addr);
+
+		} else {
+			/*
+			 * Again, we're starting from the top of the
+			 * stack. We need to physically read
+			 * the contents of a register in order to get
+			 * the Canonical Frame Address for this
+			 * function.
+			 */
+			frame->cfa = dwarf_read_arch_reg(frame->cfa_register);
+		}
+
+		frame->cfa += frame->cfa_offset;
+		break;
+	default:
+		UNWINDER_BUG();
+	}
+
+	reg = dwarf_frame_reg(frame, DWARF_ARCH_RA_REG);
+
+	/*
+	 * If we haven't seen the return address register or the return
+	 * address column is undefined then we must assume that this is
+	 * the end of the callstack.
+	 */
+	if (!reg || reg->flags == DWARF_UNDEFINED)
+		goto bail;
+
+	UNWINDER_BUG_ON(reg->flags != DWARF_REG_OFFSET);
+
+	addr = frame->cfa + reg->addr;
+	frame->return_addr = __raw_readl(addr);
+
+	/*
+	 * Ah, the joys of unwinding through interrupts.
+	 *
+	 * Interrupts are tricky - the DWARF info needs to be _really_
+	 * accurate and unfortunately I'm seeing a lot of bogus DWARF
+	 * info. For example, I've seen interrupts occur in epilogues
+	 * just after the frame pointer (r14) had been restored. The
+	 * problem was that the DWARF info claimed that the CFA could be
+	 * reached by using the value of the frame pointer before it was
+	 * restored.
+	 *
+	 * So until the compiler can be trusted to produce reliable
+	 * DWARF info when it really matters, let's stop unwinding once
+	 * we've calculated the function that was interrupted.
+	 */
+	if (prev && prev->pc == (unsigned long)ret_from_irq)
+		frame->return_addr = 0;
+
+	return frame;
+
+bail:
+	dwarf_free_frame(frame);
+	return NULL;
+}
+
+static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
+			   unsigned char *end, struct module *mod)
+{
+	struct rb_node **rb_node = &cie_root.rb_node;
+	struct rb_node *parent = *rb_node;
+	struct dwarf_cie *cie;
+	unsigned long flags;
+	int count;
+
+	cie = kzalloc(sizeof(*cie), GFP_KERNEL);
+	if (!cie)
+		return -ENOMEM;
+
+	cie->length = len;
+
+	/*
+	 * Record the offset into the .eh_frame section
+	 * for this CIE. It allows this CIE to be
+	 * quickly and easily looked up from the
+	 * corresponding FDE.
+	 */
+	cie->cie_pointer = (unsigned long)entry;
+
+	cie->version = *(char *)p++;
+	UNWINDER_BUG_ON(cie->version != 1);
+
+	cie->augmentation = p;
+	p += strlen(cie->augmentation) + 1;
+
+	count = dwarf_read_uleb128(p, &cie->code_alignment_factor);
+	p += count;
+
+	count = dwarf_read_leb128(p, &cie->data_alignment_factor);
+	p += count;
+
+	/*
+	 * Which column in the rule table contains the
+	 * return address?
+	 */
+	if (cie->version == 1) {
+		cie->return_address_reg = __raw_readb(p);
+		p++;
+	} else {
+		count = dwarf_read_uleb128(p, &cie->return_address_reg);
+		p += count;
+	}
+
+	if (cie->augmentation[0] == 'z') {
+		unsigned int length, count;
+		cie->flags |= DWARF_CIE_Z_AUGMENTATION;
+
+		count = dwarf_read_uleb128(p, &length);
+		p += count;
+
+		UNWINDER_BUG_ON((unsigned char *)p > end);
+
+		cie->initial_instructions = p + length;
+		cie->augmentation++;
+	}
+
+	while (*cie->augmentation) {
+		/*
+		 * "L" indicates a byte showing how the
+		 * LSDA pointer is encoded. Skip it.
+		 */
+		if (*cie->augmentation == 'L') {
+			p++;
+			cie->augmentation++;
+		} else if (*cie->augmentation == 'R') {
+			/*
+			 * "R" indicates a byte showing
+			 * how FDE addresses are
+			 * encoded.
+			 */
+			cie->encoding = *(char *)p++;
+			cie->augmentation++;
+		} else if (*cie->augmentation == 'P') {
+			/*
+			 * "R" indicates a personality
+			 * routine in the CIE
+			 * augmentation.
+			 */
+			UNWINDER_BUG();
+		} else if (*cie->augmentation == 'S') {
+			UNWINDER_BUG();
+		} else {
+			/*
+			 * Unknown augmentation. Assume
+			 * 'z' augmentation.
+			 */
+			p = cie->initial_instructions;
+			UNWINDER_BUG_ON(!p);
+			break;
+		}
+	}
+
+	cie->initial_instructions = p;
+	cie->instructions_end = end;
+
+	/* Add to list */
+	spin_lock_irqsave(&dwarf_cie_lock, flags);
+
+	while (*rb_node) {
+		struct dwarf_cie *cie_tmp;
+
+		cie_tmp = rb_entry(*rb_node, struct dwarf_cie, node);
+
+		parent = *rb_node;
+
+		if (cie->cie_pointer < cie_tmp->cie_pointer)
+			rb_node = &parent->rb_left;
+		else if (cie->cie_pointer >= cie_tmp->cie_pointer)
+			rb_node = &parent->rb_right;
+		else
+			WARN_ON(1);
+	}
+
+	rb_link_node(&cie->node, parent, rb_node);
+	rb_insert_color(&cie->node, &cie_root);
+
+#ifdef CONFIG_MODULES
+	if (mod != NULL)
+		list_add_tail(&cie->link, &mod->arch.cie_list);
+#endif
+
+	spin_unlock_irqrestore(&dwarf_cie_lock, flags);
+
+	return 0;
+}
+
+static int dwarf_parse_fde(void *entry, u32 entry_type,
+			   void *start, unsigned long len,
+			   unsigned char *end, struct module *mod)
+{
+	struct rb_node **rb_node = &fde_root.rb_node;
+	struct rb_node *parent = *rb_node;
+	struct dwarf_fde *fde;
+	struct dwarf_cie *cie;
+	unsigned long flags;
+	int count;
+	void *p = start;
+
+	fde = kzalloc(sizeof(*fde), GFP_KERNEL);
+	if (!fde)
+		return -ENOMEM;
+
+	fde->length = len;
+
+	/*
+	 * In a .eh_frame section the CIE pointer is the
+	 * delta between the address within the FDE
+	 */
+	fde->cie_pointer = (unsigned long)(p - entry_type - 4);
+
+	cie = dwarf_lookup_cie(fde->cie_pointer);
+	fde->cie = cie;
+
+	if (cie->encoding)
+		count = dwarf_read_encoded_value(p, &fde->initial_location,
+						 cie->encoding);
+	else
+		count = dwarf_read_addr(p, &fde->initial_location);
+
+	p += count;
+
+	if (cie->encoding)
+		count = dwarf_read_encoded_value(p, &fde->address_range,
+						 cie->encoding & 0x0f);
+	else
+		count = dwarf_read_addr(p, &fde->address_range);
+
+	p += count;
+
+	if (fde->cie->flags & DWARF_CIE_Z_AUGMENTATION) {
+		unsigned int length;
+		count = dwarf_read_uleb128(p, &length);
+		p += count + length;
+	}
+
+	/* Call frame instructions. */
+	fde->instructions = p;
+	fde->end = end;
+
+	/* Add to list. */
+	spin_lock_irqsave(&dwarf_fde_lock, flags);
+
+	while (*rb_node) {
+		struct dwarf_fde *fde_tmp;
+		unsigned long tmp_start, tmp_end;
+		unsigned long start, end;
+
+		fde_tmp = rb_entry(*rb_node, struct dwarf_fde, node);
+
+		start = fde->initial_location;
+		end = fde->initial_location + fde->address_range;
+
+		tmp_start = fde_tmp->initial_location;
+		tmp_end = fde_tmp->initial_location + fde_tmp->address_range;
+
+		parent = *rb_node;
+
+		if (start < tmp_start)
+			rb_node = &parent->rb_left;
+		else if (start >= tmp_end)
+			rb_node = &parent->rb_right;
+		else
+			WARN_ON(1);
+	}
+
+	rb_link_node(&fde->node, parent, rb_node);
+	rb_insert_color(&fde->node, &fde_root);
+
+#ifdef CONFIG_MODULES
+	if (mod != NULL)
+		list_add_tail(&fde->link, &mod->arch.fde_list);
+#endif
+
+	spin_unlock_irqrestore(&dwarf_fde_lock, flags);
+
+	return 0;
+}
+
+static void dwarf_unwinder_dump(struct task_struct *task,
+				struct pt_regs *regs,
+				unsigned long *sp,
+				const struct stacktrace_ops *ops,
+				void *data)
+{
+	struct dwarf_frame *frame, *_frame;
+	unsigned long return_addr;
+
+	_frame = NULL;
+	return_addr = 0;
+
+	while (1) {
+		frame = dwarf_unwind_stack(return_addr, _frame);
+
+		if (_frame)
+			dwarf_free_frame(_frame);
+
+		_frame = frame;
+
+		if (!frame || !frame->return_addr)
+			break;
+
+		return_addr = frame->return_addr;
+		ops->address(data, return_addr, 1);
+	}
+
+	if (frame)
+		dwarf_free_frame(frame);
+}
+
+static struct unwinder dwarf_unwinder = {
+	.name = "dwarf-unwinder",
+	.dump = dwarf_unwinder_dump,
+	.rating = 150,
+};
+
+static void __init dwarf_unwinder_cleanup(void)
+{
+	struct dwarf_fde *fde, *next_fde;
+	struct dwarf_cie *cie, *next_cie;
+
+	/*
+	 * Deallocate all the memory allocated for the DWARF unwinder.
+	 * Traverse all the FDE/CIE lists and remove and free all the
+	 * memory associated with those data structures.
+	 */
+	rbtree_postorder_for_each_entry_safe(fde, next_fde, &fde_root, node)
+		kfree(fde);
+
+	rbtree_postorder_for_each_entry_safe(cie, next_cie, &cie_root, node)
+		kfree(cie);
+
+	mempool_destroy(dwarf_reg_pool);
+	mempool_destroy(dwarf_frame_pool);
+	kmem_cache_destroy(dwarf_reg_cachep);
+	kmem_cache_destroy(dwarf_frame_cachep);
+}
+
+/**
+ *	dwarf_parse_section - parse DWARF section
+ *	@eh_frame_start: start address of the .eh_frame section
+ *	@eh_frame_end: end address of the .eh_frame section
+ *	@mod: the kernel module containing the .eh_frame section
+ *
+ *	Parse the information in a .eh_frame section.
+ */
+static int dwarf_parse_section(char *eh_frame_start, char *eh_frame_end,
+			       struct module *mod)
+{
+	u32 entry_type;
+	void *p, *entry;
+	int count, err = 0;
+	unsigned long len = 0;
+	unsigned int c_entries, f_entries;
+	unsigned char *end;
+
+	c_entries = 0;
+	f_entries = 0;
+	entry = eh_frame_start;
+
+	while ((char *)entry < eh_frame_end) {
+		p = entry;
+
+		count = dwarf_entry_len(p, &len);
+		if (count == 0) {
+			/*
+			 * We read a bogus length field value. There is
+			 * nothing we can do here apart from disabling
+			 * the DWARF unwinder. We can't even skip this
+			 * entry and move to the next one because 'len'
+			 * tells us where our next entry is.
+			 */
+			err = -EINVAL;
+			goto out;
+		} else
+			p += count;
+
+		/* initial length does not include itself */
+		end = p + len;
+
+		entry_type = get_unaligned((u32 *)p);
+		p += 4;
+
+		if (entry_type == DW_EH_FRAME_CIE) {
+			err = dwarf_parse_cie(entry, p, len, end, mod);
+			if (err < 0)
+				goto out;
+			else
+				c_entries++;
+		} else {
+			err = dwarf_parse_fde(entry, entry_type, p, len,
+					      end, mod);
+			if (err < 0)
+				goto out;
+			else
+				f_entries++;
+		}
+
+		entry = (char *)entry + len + 4;
+	}
+
+	printk(KERN_INFO "DWARF unwinder initialised: read %u CIEs, %u FDEs\n",
+	       c_entries, f_entries);
+
+	return 0;
+
+out:
+	return err;
+}
+
+#ifdef CONFIG_MODULES
+int module_dwarf_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
+			  struct module *me)
+{
+	unsigned int i, err;
+	unsigned long start, end;
+	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+	start = end = 0;
+
+	for (i = 1; i < hdr->e_shnum; i++) {
+		/* Alloc bit cleared means "ignore it." */
+		if ((sechdrs[i].sh_flags & SHF_ALLOC)
+		    && !strcmp(secstrings+sechdrs[i].sh_name, ".eh_frame")) {
+			start = sechdrs[i].sh_addr;
+			end = start + sechdrs[i].sh_size;
+			break;
+		}
+	}
+
+	/* Did we find the .eh_frame section? */
+	if (i != hdr->e_shnum) {
+		INIT_LIST_HEAD(&me->arch.cie_list);
+		INIT_LIST_HEAD(&me->arch.fde_list);
+		err = dwarf_parse_section((char *)start, (char *)end, me);
+		if (err) {
+			printk(KERN_WARNING "%s: failed to parse DWARF info\n",
+			       me->name);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *	module_dwarf_cleanup - remove FDE/CIEs associated with @mod
+ *	@mod: the module that is being unloaded
+ *
+ *	Remove any FDEs and CIEs from the global lists that came from
+ *	@mod's .eh_frame section because @mod is being unloaded.
+ */
+void module_dwarf_cleanup(struct module *mod)
+{
+	struct dwarf_fde *fde, *ftmp;
+	struct dwarf_cie *cie, *ctmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dwarf_cie_lock, flags);
+
+	list_for_each_entry_safe(cie, ctmp, &mod->arch.cie_list, link) {
+		list_del(&cie->link);
+		rb_erase(&cie->node, &cie_root);
+		kfree(cie);
+	}
+
+	spin_unlock_irqrestore(&dwarf_cie_lock, flags);
+
+	spin_lock_irqsave(&dwarf_fde_lock, flags);
+
+	list_for_each_entry_safe(fde, ftmp, &mod->arch.fde_list, link) {
+		list_del(&fde->link);
+		rb_erase(&fde->node, &fde_root);
+		kfree(fde);
+	}
+
+	spin_unlock_irqrestore(&dwarf_fde_lock, flags);
+}
+#endif /* CONFIG_MODULES */
+
+/**
+ *	dwarf_unwinder_init - initialise the dwarf unwinder
+ *
+ *	Build the data structures describing the .dwarf_frame section to
+ *	make it easier to lookup CIE and FDE entries. Because the
+ *	.eh_frame section is packed as tightly as possible it is not
+ *	easy to lookup the FDE for a given PC, so we build a list of FDE
+ *	and CIE entries that make it easier.
+ */
+static int __init dwarf_unwinder_init(void)
+{
+	int err = -ENOMEM;
+
+	dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
+			sizeof(struct dwarf_frame), 0,
+			SLAB_PANIC | SLAB_HWCACHE_ALIGN, NULL);
+
+	dwarf_reg_cachep = kmem_cache_create("dwarf_regs",
+			sizeof(struct dwarf_reg), 0,
+			SLAB_PANIC | SLAB_HWCACHE_ALIGN, NULL);
+
+	dwarf_frame_pool = mempool_create_slab_pool(DWARF_FRAME_MIN_REQ,
+						    dwarf_frame_cachep);
+	if (!dwarf_frame_pool)
+		goto out;
+
+	dwarf_reg_pool = mempool_create_slab_pool(DWARF_REG_MIN_REQ,
+						  dwarf_reg_cachep);
+	if (!dwarf_reg_pool)
+		goto out;
+
+	err = dwarf_parse_section(__start_eh_frame, __stop_eh_frame, NULL);
+	if (err)
+		goto out;
+
+	err = unwinder_register(&dwarf_unwinder);
+	if (err)
+		goto out;
+
+	dwarf_unwinder_ready = 1;
+
+	return 0;
+
+out:
+	printk(KERN_ERR "Failed to initialise DWARF unwinder: %d\n", err);
+	dwarf_unwinder_cleanup();
+	return err;
+}
+early_initcall(dwarf_unwinder_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/entry-common.S b/src/kernel/linux/v4.14/arch/sh/kernel/entry-common.S
new file mode 100644
index 0000000..ed5b758
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/entry-common.S
@@ -0,0 +1,402 @@
+/* 
+ *  Copyright (C) 1999, 2000, 2002  Niibe Yutaka
+ *  Copyright (C) 2003 - 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+! NOTE:
+! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
+! to be jumped is too far, but it causes illegal slot exception.
+
+/*	
+ * entry.S contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all interrupts
+ * and faults that can result in a task-switch.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ * NOTE: This code uses a convention that instructions in the delay slot
+ * of a transfer-control instruction are indented by an extra space, thus:
+ *
+ *    jmp	@k0	    ! control-transfer instruction
+ *     ldc	k1, ssr     ! delay slot
+ *
+ * Stack layout in 'ret_from_syscall':
+ * 	ptrace needs to have all regs on the stack.
+ *	if the order here is changed, it needs to be
+ *	updated in ptrace.c and ptrace.h
+ *
+ *	r0
+ *      ...
+ *	r15 = stack pointer
+ *	spc
+ *	pr
+ *	ssr
+ *	gbr
+ *	mach
+ *	macl
+ *	syscall #
+ *
+ */
+#include <asm/dwarf.h>
+
+#if defined(CONFIG_PREEMPT)
+#  define preempt_stop()	cli ; TRACE_IRQS_OFF
+#else
+#  define preempt_stop()
+#  define resume_kernel		__restore_all
+#endif
+
+
+	.align	2
+ENTRY(exception_error)
+	!
+	TRACE_IRQS_ON
+	sti
+	mov.l	1f, r0
+	jmp	@r0
+	 nop
+
+	.align	2
+1:	.long	do_exception_error
+
+	.align	2
+ret_from_exception:
+	CFI_STARTPROC simple
+	CFI_DEF_CFA r14, 0
+	CFI_REL_OFFSET 17, 64
+	CFI_REL_OFFSET 15, 60
+	CFI_REL_OFFSET 14, 56
+	CFI_REL_OFFSET 13, 52
+	CFI_REL_OFFSET 12, 48
+	CFI_REL_OFFSET 11, 44
+	CFI_REL_OFFSET 10, 40
+	CFI_REL_OFFSET 9, 36
+	CFI_REL_OFFSET 8, 32
+	preempt_stop()
+ENTRY(ret_from_irq)
+	!
+	mov	#OFF_SR, r0
+	mov.l	@(r0,r15), r0	! get status register
+	shll	r0
+	shll	r0		! kernel space?
+	get_current_thread_info r8, r0
+	bt	resume_kernel	! Yes, it's from kernel, go back soon
+
+#ifdef CONFIG_PREEMPT
+	bra	resume_userspace
+	 nop
+ENTRY(resume_kernel)
+	cli
+	TRACE_IRQS_OFF
+	mov.l	@(TI_PRE_COUNT,r8), r0	! current_thread_info->preempt_count
+	tst	r0, r0
+	bf	noresched
+need_resched:
+	mov.l	@(TI_FLAGS,r8), r0	! current_thread_info->flags
+	tst	#_TIF_NEED_RESCHED, r0	! need_resched set?
+	bt	noresched
+
+	mov	#OFF_SR, r0
+	mov.l	@(r0,r15), r0		! get status register
+	shlr	r0
+	and	#(0xf0>>1), r0		! interrupts off (exception path)?
+	cmp/eq	#(0xf0>>1), r0
+	bt	noresched
+	mov.l	1f, r0
+	jsr	@r0			! call preempt_schedule_irq
+	 nop
+	bra	need_resched
+	 nop
+
+noresched:
+	bra	__restore_all
+	 nop
+
+	.align 2
+1:	.long	preempt_schedule_irq
+#endif
+
+ENTRY(resume_userspace)
+	! r8: current_thread_info
+	cli
+	TRACE_IRQS_OFF
+	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
+	tst	#(_TIF_WORK_MASK & 0xff), r0
+	bt/s	__restore_all
+	 tst	#_TIF_NEED_RESCHED, r0
+
+	.align	2
+work_pending:
+	! r0: current_thread_info->flags
+	! r8: current_thread_info
+	! t:  result of "tst	#_TIF_NEED_RESCHED, r0"
+	bf/s	work_resched
+	 tst	#(_TIF_SIGPENDING | _TIF_NOTIFY_RESUME), r0
+work_notifysig:
+	bt/s	__restore_all
+	 mov	r15, r4
+	mov	r12, r5		! set arg1(save_r0)
+	mov	r0, r6
+	sti
+	mov.l	2f, r1
+	mov.l	3f, r0
+	jmp	@r1
+	 lds	r0, pr
+work_resched:
+	mov.l	1f, r1
+	jsr	@r1				! schedule
+	 nop
+	cli
+	TRACE_IRQS_OFF
+	!
+	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
+	tst	#(_TIF_WORK_MASK & 0xff), r0
+	bt	__restore_all
+	bra	work_pending
+	 tst	#_TIF_NEED_RESCHED, r0
+
+	.align	2
+1:	.long	schedule
+2:	.long	do_notify_resume
+3:	.long	resume_userspace
+
+	.align	2
+syscall_exit_work:
+	! r0: current_thread_info->flags
+	! r8: current_thread_info
+	tst	#(_TIF_WORK_SYSCALL_MASK & 0xff), r0
+	bt/s	work_pending
+	 tst	#_TIF_NEED_RESCHED, r0
+	TRACE_IRQS_ON
+	sti
+	mov	r15, r4
+	mov.l	8f, r0			! do_syscall_trace_leave
+	jsr	@r0
+	 nop
+	bra	resume_userspace
+	 nop
+
+	.align	2
+syscall_trace_entry:
+	!                     	Yes it is traced.
+	mov     r15, r4
+	mov.l	7f, r11		! Call do_syscall_trace_enter which notifies
+	jsr	@r11	    	! superior (will chomp R[0-7])
+	 nop
+	mov.l	r0, @(OFF_R0,r15)	! Save return value
+	!			Reload R0-R4 from kernel stack, where the
+	!   	    	    	parent may have modified them using
+	!   	    	    	ptrace(POKEUSR).  (Note that R0-R2 are
+	!   	    	    	reloaded from the kernel stack by syscall_call
+	!   	    	    	below, so don't need to be reloaded here.)
+	!   	    	    	This allows the parent to rewrite system calls
+	!   	    	    	and args on the fly.
+	mov.l	@(OFF_R4,r15), r4   ! arg0
+	mov.l	@(OFF_R5,r15), r5
+	mov.l	@(OFF_R6,r15), r6
+	mov.l	@(OFF_R7,r15), r7   ! arg3
+	mov.l	@(OFF_R3,r15), r3   ! syscall_nr
+	!
+	mov.l	6f, r10			! Number of syscalls
+	cmp/hs	r10, r3
+	bf	syscall_call
+	mov	#-ENOSYS, r0
+	bra	syscall_exit
+	 mov.l	r0, @(OFF_R0,r15)	! Return value
+
+__restore_all:
+	mov	#OFF_SR, r0
+	mov.l	@(r0,r15), r0	! get status register
+
+	shlr2	r0
+	and	#0x3c, r0
+	cmp/eq	#0x3c, r0
+	bt	1f
+	TRACE_IRQS_ON
+	bra	2f
+	 nop
+1:
+	TRACE_IRQS_OFF
+2:
+	mov.l	3f, r0
+	jmp	@r0
+	 nop
+
+	.align	2
+3:	.long	restore_all
+
+	.align	2
+syscall_badsys:			! Bad syscall number
+	get_current_thread_info r8, r0
+	mov	#-ENOSYS, r0
+	bra	resume_userspace
+	 mov.l	r0, @(OFF_R0,r15)	! Return value
+
+/*
+ * The main debug trap handler.
+ *
+ * r8=TRA (not the trap number!)
+ *
+ * Note: This assumes that the trapa value is left in its original
+ * form (without the shlr2 shift) so the calculation for the jump
+ * call table offset remains a simple in place mask.
+ */
+debug_trap:
+	mov	r8, r0
+	and	#(0xf << 2), r0
+	mov.l	1f, r8
+	add	r0, r8
+	mov.l	@r8, r8
+	jsr	@r8
+	 nop
+	bra	ret_from_exception
+	 nop
+	CFI_ENDPROC
+
+	.align	2
+1:	.long	debug_trap_table
+
+/*
+ * Syscall interface:
+ *
+ *	Syscall #: R3
+ *	Arguments #0 to #3: R4--R7
+ *	Arguments #4 to #6: R0, R1, R2
+ *	TRA: See following table.
+ *
+ * (TRA>>2)	Purpose
+ * --------	-------
+ * 0x00-0x0f	original SH-3/4 syscall ABI (not in general use).
+ * 0x10-0x1f	general SH-3/4 syscall ABI.
+ *      0x1f	unified SH-2/3/4 syscall ABI (preferred).
+ * 0x20-0x2f	original SH-2 syscall ABI.
+ * 0x30-0x3f	debug traps used by the kernel.
+ * 0x40-0xff	Not supported by all parts, so left unhandled.
+ *
+ * For making system calls, any trap number in the range for the
+ * given cpu model may be used, but the unified trap number 0x1f is
+ * preferred for compatibility with all models.
+ *
+ * The low bits of the trap number were once documented as matching
+ * the number of arguments, but they were never actually used as such
+ * by the kernel. SH-2 originally used its own separate trap range
+ * because several hardware exceptions fell in the range used for the
+ * SH-3/4 syscall ABI.
+ *
+ * This code also handles delegating other traps to the BIOS/gdb stub.
+ *
+ * Note: When we're first called, the TRA value must be shifted
+ * right 2 bits in order to get the value that was used as the "trapa"
+ * argument.
+ */
+
+	.align	2
+	.globl	ret_from_fork
+ret_from_fork:
+	mov.l	1f, r8
+	jsr	@r8
+	 mov	r0, r4
+	bra	syscall_exit
+	 nop
+
+	.align	2
+	.globl	ret_from_kernel_thread
+ret_from_kernel_thread:
+	mov.l	1f, r8
+	jsr	@r8
+	 mov	r0, r4
+	mov.l	@(OFF_R5,r15), r5   ! fn
+	jsr	@r5
+	 mov.l	@(OFF_R4,r15), r4   ! arg
+	bra	syscall_exit
+	 nop
+
+	.align	2
+1:	.long	schedule_tail
+
+/*
+ * The poorly named main trapa decode and dispatch routine, for
+ * system calls and debug traps through their respective jump tables.
+ */
+ENTRY(system_call)
+	setup_frame_reg
+#if !defined(CONFIG_CPU_SH2)
+	mov.l	1f, r9
+	mov.l	@r9, r8		! Read from TRA (Trap Address) Register
+#endif
+
+	mov	#OFF_TRA, r10
+	add	r15, r10
+	mov.l	r8, @r10		! set TRA value to tra
+
+	/*
+	 * Check the trap type
+	 */
+	mov	#((0x20 << 2) - 1), r9
+	cmp/hi	r9, r8
+	bt/s	debug_trap		! it's a debug trap..
+	 nop
+
+	TRACE_IRQS_ON
+	sti
+
+	!
+	get_current_thread_info r8, r10
+	mov.l	@(TI_FLAGS,r8), r8
+	mov	#(_TIF_WORK_SYSCALL_MASK & 0xff), r10
+	mov	#(_TIF_WORK_SYSCALL_MASK >> 8), r9
+	tst	r10, r8
+	shll8	r9
+	bf	syscall_trace_entry
+	tst	r9, r8
+	bf	syscall_trace_entry
+	!
+	mov.l	6f, r8			! Number of syscalls
+	cmp/hs	r8, r3
+	bt	syscall_badsys
+	!
+syscall_call:
+	shll2	r3		! x4
+	mov.l	3f, r8		! Load the address of sys_call_table
+	add	r8, r3
+	mov.l	@r3, r8
+	mov.l	@(OFF_R2,r15), r2
+	mov.l	@(OFF_R1,r15), r1
+	mov.l	@(OFF_R0,r15), r0
+	mov.l	r2, @-r15
+	mov.l	r1, @-r15
+	mov.l	r0, @-r15
+	jsr	@r8	    	! jump to specific syscall handler
+	 nop
+	add	#12, r15
+	mov.l	@(OFF_R0,r15), r12		! save r0
+	mov.l	r0, @(OFF_R0,r15)		! save the return value
+	!
+syscall_exit:
+	cli
+	TRACE_IRQS_OFF
+	!
+	get_current_thread_info r8, r0
+	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
+	tst	#(_TIF_ALLWORK_MASK & 0xff), r0
+	mov	#(_TIF_ALLWORK_MASK >> 8), r1
+	bf	syscall_exit_work
+	shlr8	r0
+	tst	r0, r1
+	bf	syscall_exit_work
+	bra	__restore_all
+	 nop
+	.align	2
+#if !defined(CONFIG_CPU_SH2)
+1:	.long	TRA
+#endif
+6:	.long	NR_syscalls
+3:	.long	sys_call_table
+7:	.long	do_syscall_trace_enter
+8:	.long	do_syscall_trace_leave
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/ftrace.c b/src/kernel/linux/v4.14/arch/sh/kernel/ftrace.c
new file mode 100644
index 0000000..96dd9f7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/ftrace.c
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2008 Matt Fleming <matt@console-pimps.org>
+ * Copyright (C) 2008 Paul Mundt <lethal@linux-sh.org>
+ *
+ * Code for replacing ftrace calls with jumps.
+ *
+ * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
+ *
+ * Thanks goes to Ingo Molnar, for suggesting the idea.
+ * Mathieu Desnoyers, for suggesting postponing the modifications.
+ * Arjan van de Ven, for keeping me straight, and explaining to me
+ * the dangers of modifying code on the run.
+ */
+#include <linux/uaccess.h>
+#include <linux/ftrace.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <asm/ftrace.h>
+#include <asm/cacheflush.h>
+#include <asm/unistd.h>
+#include <trace/syscall.h>
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+static unsigned char ftrace_replaced_code[MCOUNT_INSN_SIZE];
+
+static unsigned char ftrace_nop[4];
+/*
+ * If we're trying to nop out a call to a function, we instead
+ * place a call to the address after the memory table.
+ *
+ * 8c011060 <a>:
+ * 8c011060:       02 d1           mov.l   8c01106c <a+0xc>,r1
+ * 8c011062:       22 4f           sts.l   pr,@-r15
+ * 8c011064:       02 c7           mova    8c011070 <a+0x10>,r0
+ * 8c011066:       2b 41           jmp     @r1
+ * 8c011068:       2a 40           lds     r0,pr
+ * 8c01106a:       09 00           nop
+ * 8c01106c:       68 24           .word 0x2468     <--- ip
+ * 8c01106e:       1d 8c           .word 0x8c1d
+ * 8c011070:       26 4f           lds.l   @r15+,pr <--- ip + MCOUNT_INSN_SIZE
+ *
+ * We write 0x8c011070 to 0x8c01106c so that on entry to a() we branch
+ * past the _mcount call and continue executing code like normal.
+ */
+static unsigned char *ftrace_nop_replace(unsigned long ip)
+{
+	__raw_writel(ip + MCOUNT_INSN_SIZE, ftrace_nop);
+	return ftrace_nop;
+}
+
+static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
+{
+	/* Place the address in the memory table. */
+	__raw_writel(addr, ftrace_replaced_code);
+
+	/*
+	 * No locking needed, this must be called via kstop_machine
+	 * which in essence is like running on a uniprocessor machine.
+	 */
+	return ftrace_replaced_code;
+}
+
+/*
+ * Modifying code must take extra care. On an SMP machine, if
+ * the code being modified is also being executed on another CPU
+ * that CPU will have undefined results and possibly take a GPF.
+ * We use kstop_machine to stop other CPUS from exectuing code.
+ * But this does not stop NMIs from happening. We still need
+ * to protect against that. We separate out the modification of
+ * the code to take care of this.
+ *
+ * Two buffers are added: An IP buffer and a "code" buffer.
+ *
+ * 1) Put the instruction pointer into the IP buffer
+ *    and the new code into the "code" buffer.
+ * 2) Wait for any running NMIs to finish and set a flag that says
+ *    we are modifying code, it is done in an atomic operation.
+ * 3) Write the code
+ * 4) clear the flag.
+ * 5) Wait for any running NMIs to finish.
+ *
+ * If an NMI is executed, the first thing it does is to call
+ * "ftrace_nmi_enter". This will check if the flag is set to write
+ * and if it is, it will write what is in the IP and "code" buffers.
+ *
+ * The trick is, it does not matter if everyone is writing the same
+ * content to the code location. Also, if a CPU is executing code
+ * it is OK to write to that code location if the contents being written
+ * are the same as what exists.
+ */
+#define MOD_CODE_WRITE_FLAG (1 << 31)	/* set when NMI should do the write */
+static atomic_t nmi_running = ATOMIC_INIT(0);
+static int mod_code_status;		/* holds return value of text write */
+static void *mod_code_ip;		/* holds the IP to write to */
+static void *mod_code_newcode;		/* holds the text to write to the IP */
+
+static void clear_mod_flag(void)
+{
+	int old = atomic_read(&nmi_running);
+
+	for (;;) {
+		int new = old & ~MOD_CODE_WRITE_FLAG;
+
+		if (old == new)
+			break;
+
+		old = atomic_cmpxchg(&nmi_running, old, new);
+	}
+}
+
+static void ftrace_mod_code(void)
+{
+	/*
+	 * Yes, more than one CPU process can be writing to mod_code_status.
+	 *    (and the code itself)
+	 * But if one were to fail, then they all should, and if one were
+	 * to succeed, then they all should.
+	 */
+	mod_code_status = probe_kernel_write(mod_code_ip, mod_code_newcode,
+					     MCOUNT_INSN_SIZE);
+
+	/* if we fail, then kill any new writers */
+	if (mod_code_status)
+		clear_mod_flag();
+}
+
+void arch_ftrace_nmi_enter(void)
+{
+	if (atomic_inc_return(&nmi_running) & MOD_CODE_WRITE_FLAG) {
+		smp_rmb();
+		ftrace_mod_code();
+	}
+	/* Must have previous changes seen before executions */
+	smp_mb();
+}
+
+void arch_ftrace_nmi_exit(void)
+{
+	/* Finish all executions before clearing nmi_running */
+	smp_mb();
+	atomic_dec(&nmi_running);
+}
+
+static void wait_for_nmi_and_set_mod_flag(void)
+{
+	if (!atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG))
+		return;
+
+	do {
+		cpu_relax();
+	} while (atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG));
+}
+
+static void wait_for_nmi(void)
+{
+	if (!atomic_read(&nmi_running))
+		return;
+
+	do {
+		cpu_relax();
+	} while (atomic_read(&nmi_running));
+}
+
+static int
+do_ftrace_mod_code(unsigned long ip, void *new_code)
+{
+	mod_code_ip = (void *)ip;
+	mod_code_newcode = new_code;
+
+	/* The buffers need to be visible before we let NMIs write them */
+	smp_mb();
+
+	wait_for_nmi_and_set_mod_flag();
+
+	/* Make sure all running NMIs have finished before we write the code */
+	smp_mb();
+
+	ftrace_mod_code();
+
+	/* Make sure the write happens before clearing the bit */
+	smp_mb();
+
+	clear_mod_flag();
+	wait_for_nmi();
+
+	return mod_code_status;
+}
+
+static int ftrace_modify_code(unsigned long ip, unsigned char *old_code,
+		       unsigned char *new_code)
+{
+	unsigned char replaced[MCOUNT_INSN_SIZE];
+
+	/*
+	 * Note:
+	 * We are paranoid about modifying text, as if a bug was to happen, it
+	 * could cause us to read or write to someplace that could cause harm.
+	 * Carefully read and modify the code with probe_kernel_*(), and make
+	 * sure what we read is what we expected it to be before modifying it.
+	 */
+
+	/* read the text we want to modify */
+	if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
+		return -EFAULT;
+
+	/* Make sure it is what we expect it to be */
+	if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0)
+		return -EINVAL;
+
+	/* replace the text with the new text */
+	if (do_ftrace_mod_code(ip, new_code))
+		return -EPERM;
+
+	flush_icache_range(ip, ip + MCOUNT_INSN_SIZE);
+
+	return 0;
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	unsigned long ip = (unsigned long)(&ftrace_call) + MCOUNT_INSN_OFFSET;
+	unsigned char old[MCOUNT_INSN_SIZE], *new;
+
+	memcpy(old, (unsigned char *)ip, MCOUNT_INSN_SIZE);
+	new = ftrace_call_replace(ip, (unsigned long)func);
+
+	return ftrace_modify_code(ip, old, new);
+}
+
+int ftrace_make_nop(struct module *mod,
+		    struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned char *new, *old;
+	unsigned long ip = rec->ip;
+
+	old = ftrace_call_replace(ip, addr);
+	new = ftrace_nop_replace(ip);
+
+	return ftrace_modify_code(rec->ip, old, new);
+}
+
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned char *new, *old;
+	unsigned long ip = rec->ip;
+
+	old = ftrace_nop_replace(ip);
+	new = ftrace_call_replace(ip, addr);
+
+	return ftrace_modify_code(rec->ip, old, new);
+}
+
+int __init ftrace_dyn_arch_init(void)
+{
+	return 0;
+}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
+extern void ftrace_graph_call(void);
+
+static int ftrace_mod(unsigned long ip, unsigned long old_addr,
+		      unsigned long new_addr)
+{
+	unsigned char code[MCOUNT_INSN_SIZE];
+
+	if (probe_kernel_read(code, (void *)ip, MCOUNT_INSN_SIZE))
+		return -EFAULT;
+
+	if (old_addr != __raw_readl((unsigned long *)code))
+		return -EINVAL;
+
+	__raw_writel(new_addr, ip);
+	return 0;
+}
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	unsigned long ip, old_addr, new_addr;
+
+	ip = (unsigned long)(&ftrace_graph_call) + GRAPH_INSN_OFFSET;
+	old_addr = (unsigned long)(&skip_trace);
+	new_addr = (unsigned long)(&ftrace_graph_caller);
+
+	return ftrace_mod(ip, old_addr, new_addr);
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	unsigned long ip, old_addr, new_addr;
+
+	ip = (unsigned long)(&ftrace_graph_call) + GRAPH_INSN_OFFSET;
+	old_addr = (unsigned long)(&ftrace_graph_caller);
+	new_addr = (unsigned long)(&skip_trace);
+
+	return ftrace_mod(ip, old_addr, new_addr);
+}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in the current thread info.
+ *
+ * This is the main routine for the function graph tracer. The function
+ * graph tracer essentially works like this:
+ *
+ * parent is the stack address containing self_addr's return address.
+ * We pull the real return address out of parent and store it in
+ * current's ret_stack. Then, we replace the return address on the stack
+ * with the address of return_to_handler. self_addr is the function that
+ * called mcount.
+ *
+ * When self_addr returns, it will jump to return_to_handler which calls
+ * ftrace_return_to_handler. ftrace_return_to_handler will pull the real
+ * return address off of current's ret_stack and jump to it.
+ */
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+{
+	unsigned long old;
+	int faulted, err;
+	struct ftrace_graph_ent trace;
+	unsigned long return_hooker = (unsigned long)&return_to_handler;
+
+	if (unlikely(ftrace_graph_is_dead()))
+		return;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	/*
+	 * Protect against fault, even if it shouldn't
+	 * happen. This tool is too much intrusive to
+	 * ignore such a protection.
+	 */
+	__asm__ __volatile__(
+		"1:						\n\t"
+		"mov.l		@%2, %0				\n\t"
+		"2:						\n\t"
+		"mov.l		%3, @%2				\n\t"
+		"mov		#0, %1				\n\t"
+		"3:						\n\t"
+		".section .fixup, \"ax\"			\n\t"
+		"4:						\n\t"
+		"mov.l		5f, %0				\n\t"
+		"jmp		@%0				\n\t"
+		" mov		#1, %1				\n\t"
+		".balign 4					\n\t"
+		"5:	.long 3b				\n\t"
+		".previous					\n\t"
+		".section __ex_table,\"a\"			\n\t"
+		".long 1b, 4b					\n\t"
+		".long 2b, 4b					\n\t"
+		".previous					\n\t"
+		: "=&r" (old), "=r" (faulted)
+		: "r" (parent), "r" (return_hooker)
+	);
+
+	if (unlikely(faulted)) {
+		ftrace_graph_stop();
+		WARN_ON(1);
+		return;
+	}
+
+	err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0, NULL);
+	if (err == -EBUSY) {
+		__raw_writel(old, parent);
+		return;
+	}
+
+	trace.func = self_addr;
+
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		__raw_writel(old, parent);
+	}
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/head_32.S b/src/kernel/linux/v4.14/arch/sh/kernel/head_32.S
new file mode 100644
index 0000000..4e352c3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/head_32.S
@@ -0,0 +1,368 @@
+/* $Id: head.S,v 1.7 2003/09/01 17:58:19 lethal Exp $
+ *
+ *  arch/sh/kernel/head.S
+ *
+ *  Copyright (C) 1999, 2000  Niibe Yutaka & Kaz Kojima
+ *  Copyright (C) 2010  Matt Fleming
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Head.S contains the SH exception handlers and startup code.
+ */
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/mmu.h>
+#include <cpu/mmu_context.h>
+
+#ifdef CONFIG_CPU_SH4A
+#define SYNCO()		synco
+
+#define PREFI(label, reg)	\
+	mov.l	label, reg;	\
+	prefi	@reg
+#else
+#define SYNCO()
+#define PREFI(label, reg)
+#endif
+
+	.section	.empty_zero_page, "aw"
+ENTRY(empty_zero_page)
+	.long	1		/* MOUNT_ROOT_RDONLY */
+	.long	0		/* RAMDISK_FLAGS */
+	.long	0x0200		/* ORIG_ROOT_DEV */
+	.long	1		/* LOADER_TYPE */
+	.long	0x00000000	/* INITRD_START */
+	.long	0x00000000	/* INITRD_SIZE */
+#ifdef CONFIG_32BIT
+	.long	0x53453f00 + 32	/* "SE?" = 32 bit */
+#else
+	.long	0x53453f00 + 29	/* "SE?" = 29 bit */
+#endif
+1:
+	.skip	PAGE_SIZE - empty_zero_page - 1b
+
+	__HEAD
+
+/*
+ * Condition at the entry of _stext:
+ *
+ *   BSC has already been initialized.
+ *   INTC may or may not be initialized.
+ *   VBR may or may not be initialized.
+ *   MMU may or may not be initialized.
+ *   Cache may or may not be initialized.
+ *   Hardware (including on-chip modules) may or may not be initialized. 
+ *
+ */
+ENTRY(_stext)
+	!			Initialize Status Register
+	mov.l	1f, r0		! MD=1, RB=0, BL=0, IMASK=0xF
+	ldc	r0, sr
+	!			Initialize global interrupt mask
+#ifdef CONFIG_CPU_HAS_SR_RB
+	mov	#0, r0
+	ldc	r0, r6_bank
+#endif
+
+#ifdef CONFIG_OF_FLATTREE
+	mov	r4, r12		! Store device tree blob pointer in r12
+#endif
+	
+	/*
+	 * Prefetch if possible to reduce cache miss penalty.
+	 *
+	 * We do this early on for SH-4A as a micro-optimization,
+	 * as later on we will have speculative execution enabled
+	 * and this will become less of an issue.
+	 */
+	PREFI(5f, r0)
+	PREFI(6f, r0)
+
+	!
+	mov.l	2f, r0
+	mov	r0, r15		! Set initial r15 (stack pointer)
+#ifdef CONFIG_CPU_HAS_SR_RB
+	mov.l	7f, r0
+	ldc	r0, r7_bank	! ... and initial thread_info
+#endif
+
+#ifdef CONFIG_PMB
+/*
+ * Reconfigure the initial PMB mappings setup by the hardware.
+ *
+ * When we boot in 32-bit MMU mode there are 2 PMB entries already
+ * setup for us.
+ *
+ * Entry       VPN	   PPN	    V	SZ	C	UB	WT
+ * ---------------------------------------------------------------
+ *   0	    0x80000000 0x00000000   1  512MB	1	0	1
+ *   1	    0xA0000000 0x00000000   1  512MB	0	0	0
+ *
+ * But we reprogram them here because we want complete control over
+ * our address space and the initial mappings may not map PAGE_OFFSET
+ * to __MEMORY_START (or even map all of our RAM).
+ *
+ * Once we've setup cached and uncached mappings we clear the rest of the
+ * PMB entries. This clearing also deals with the fact that PMB entries
+ * can persist across reboots. The PMB could have been left in any state
+ * when the reboot occurred, so to be safe we clear all entries and start
+ * with with a clean slate.
+ *
+ * The uncached mapping is constructed using the smallest possible
+ * mapping with a single unbufferable page. Only the kernel text needs to
+ * be covered via the uncached mapping so that certain functions can be
+ * run uncached.
+ *
+ * Drivers and the like that have previously abused the 1:1 identity
+ * mapping are unsupported in 32-bit mode and must specify their caching
+ * preference when page tables are constructed.
+ *
+ * This frees up the P2 space for more nefarious purposes.
+ *
+ * Register utilization is as follows:
+ *
+ *	r0 = PMB_DATA data field
+ *	r1 = PMB_DATA address field
+ *	r2 = PMB_ADDR data field
+ *	r3 = PMB_ADDR address field
+ *	r4 = PMB_E_SHIFT
+ *	r5 = remaining amount of RAM to map
+ *	r6 = PMB mapping size we're trying to use
+ *	r7 = cached_to_uncached
+ *	r8 = scratch register
+ *	r9 = scratch register
+ *	r10 = number of PMB entries we've setup
+ *	r11 = scratch register
+ */
+
+	mov.l	.LMMUCR, r1	/* Flush the TLB */
+	mov.l	@r1, r0
+	or	#MMUCR_TI, r0
+	mov.l	r0, @r1
+
+	mov.l	.LMEMORY_SIZE, r5
+
+	mov	#PMB_E_SHIFT, r0
+	mov	#0x1, r4
+	shld	r0, r4
+
+	mov.l	.LFIRST_DATA_ENTRY, r0
+	mov.l	.LPMB_DATA, r1
+	mov.l	.LFIRST_ADDR_ENTRY, r2
+	mov.l	.LPMB_ADDR, r3
+
+	/*
+	 * First we need to walk the PMB and figure out if there are any
+	 * existing mappings that match the initial mappings VPN/PPN.
+	 * If these have already been established by the bootloader, we
+	 * don't bother setting up new entries here, and let the late PMB
+	 * initialization take care of things instead.
+	 *
+	 * Note that we may need to coalesce and merge entries in order
+	 * to reclaim more available PMB slots, which is much more than
+	 * we want to do at this early stage.
+	 */
+	mov	#0, r10
+	mov	#NR_PMB_ENTRIES, r9
+
+	mov	r1, r7		/* temporary PMB_DATA iter */
+
+.Lvalidate_existing_mappings:
+
+	mov.l	.LPMB_DATA_MASK, r11
+	mov.l	@r7, r8
+	and	r11, r8
+	cmp/eq	r0, r8		/* Check for valid __MEMORY_START mappings */
+	bt	.Lpmb_done
+
+	add	#1, r10		/* Increment the loop counter */
+	cmp/eq	r9, r10
+	bf/s	.Lvalidate_existing_mappings
+	 add	r4, r7		/* Increment to the next PMB_DATA entry */
+
+	/*
+	 * If we've fallen through, continue with setting up the initial
+	 * mappings.
+	 */
+
+	mov	r5, r7		/* cached_to_uncached */
+	mov	#0, r10
+
+#ifdef CONFIG_UNCACHED_MAPPING
+	/*
+	 * Uncached mapping
+	 */
+	mov	#(PMB_SZ_16M >> 2), r9
+	shll2	r9
+
+	mov	#(PMB_UB >> 8), r8
+	shll8	r8
+
+	or	r0, r8
+	or	r9, r8
+	mov.l	r8, @r1
+	mov	r2, r8
+	add	r7, r8
+	mov.l	r8, @r3
+
+	add	r4, r1
+	add	r4, r3
+	add	#1, r10
+#endif
+
+/*
+ * Iterate over all of the available sizes from largest to
+ * smallest for constructing the cached mapping.
+ */
+#define __PMB_ITER_BY_SIZE(size)			\
+.L##size:						\
+	mov	#(size >> 4), r6;			\
+	shll16	r6;					\
+	shll8	r6;					\
+							\
+	cmp/hi	r5, r6;					\
+	bt	9999f;					\
+							\
+	mov	#(PMB_SZ_##size##M >> 2), r9;		\
+	shll2	r9;					\
+							\
+	/*						\
+	 * Cached mapping				\
+	 */						\
+	mov	#PMB_C, r8;				\
+	or	r0, r8;					\
+	or	r9, r8;					\
+	mov.l	r8, @r1;				\
+	mov.l	r2, @r3;				\
+							\
+	/* Increment to the next PMB_DATA entry */	\
+	add	r4, r1;					\
+	/* Increment to the next PMB_ADDR entry */	\
+	add	r4, r3;					\
+	/* Increment number of PMB entries */		\
+	add	#1, r10;				\
+							\
+	sub	r6, r5;					\
+	add	r6, r0;					\
+	add	r6, r2;					\
+							\
+	bra	.L##size;				\
+9999:
+
+	__PMB_ITER_BY_SIZE(512)
+	__PMB_ITER_BY_SIZE(128)
+	__PMB_ITER_BY_SIZE(64)
+	__PMB_ITER_BY_SIZE(16)
+
+#ifdef CONFIG_UNCACHED_MAPPING
+	/*
+	 * Now that we can access it, update cached_to_uncached and
+	 * uncached_size.
+	 */
+	mov.l	.Lcached_to_uncached, r0
+	mov.l	r7, @r0
+
+	mov.l	.Luncached_size, r0
+	mov	#1, r7
+	shll16	r7
+	shll8	r7
+	mov.l	r7, @r0
+#endif
+
+	/*
+	 * Clear the remaining PMB entries.
+	 *
+	 * r3 = entry to begin clearing from
+	 * r10 = number of entries we've setup so far
+	 */
+	mov	#0, r1
+	mov	#NR_PMB_ENTRIES, r0
+
+.Lagain:
+	mov.l	r1, @r3		/* Clear PMB_ADDR entry */
+	add	#1, r10		/* Increment the loop counter */
+	cmp/eq	r0, r10
+	bf/s	.Lagain
+	 add	r4, r3		/* Increment to the next PMB_ADDR entry */
+
+	mov.l	6f, r0
+	icbi	@r0
+
+.Lpmb_done:
+#endif /* CONFIG_PMB */
+
+#ifndef CONFIG_SH_NO_BSS_INIT
+	/*
+	 * Don't clear BSS if running on slow platforms such as an RTL simulation,
+	 * remote memory via SHdebug link, etc.  For these the memory can be guaranteed
+	 * to be all zero on boot anyway.
+	 */
+				! Clear BSS area
+#ifdef CONFIG_SMP	
+	mov.l	3f, r0
+	cmp/eq	#0, r0		! skip clear if set to zero
+	bt	10f
+#endif
+	
+	mov.l	3f, r1
+	add	#4, r1
+	mov.l	4f, r2
+	mov	#0, r0
+9:	cmp/hs	r2, r1
+	bf/s	9b		! while (r1 < r2)
+	 mov.l	r0,@-r2
+
+10:		
+#endif
+
+#ifdef CONFIG_OF_FLATTREE
+	mov.l	8f, r0		! Make flat device tree available early.
+	jsr	@r0
+	 mov	r12, r4
+#endif
+
+	!			Additional CPU initialization
+	mov.l	6f, r0
+	jsr	@r0
+	 nop
+
+	SYNCO()			! Wait for pending instructions..
+	
+	!			Start kernel
+	mov.l	5f, r0
+	jmp	@r0
+	 nop
+
+	.balign 4
+#if defined(CONFIG_CPU_SH2)
+1:	.long	0x000000F0		! IMASK=0xF
+#else
+1:	.long	0x500080F0		! MD=1, RB=0, BL=1, FD=1, IMASK=0xF
+#endif
+ENTRY(stack_start)
+2:	.long	init_thread_union+THREAD_SIZE
+3:	.long	__bss_start
+4:	.long	_end
+5:	.long	start_kernel
+6:	.long	cpu_init
+7:	.long	init_thread_union
+#if defined(CONFIG_OF_FLATTREE)
+8:	.long	sh_fdt_init
+#endif
+
+#ifdef CONFIG_PMB
+.LPMB_ADDR:		.long	PMB_ADDR
+.LPMB_DATA:		.long	PMB_DATA
+.LPMB_DATA_MASK:	.long	PMB_PFN_MASK | PMB_V
+.LFIRST_ADDR_ENTRY:	.long	PAGE_OFFSET | PMB_V
+.LFIRST_DATA_ENTRY:	.long	__MEMORY_START | PMB_V
+.LMMUCR:		.long	MMUCR
+.LMEMORY_SIZE:		.long	__MEMORY_SIZE
+#ifdef CONFIG_UNCACHED_MAPPING
+.Lcached_to_uncached:	.long	cached_to_uncached
+.Luncached_size:	.long	uncached_size
+#endif
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/head_64.S b/src/kernel/linux/v4.14/arch/sh/kernel/head_64.S
new file mode 100644
index 0000000..defd851
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/head_64.S
@@ -0,0 +1,357 @@
+/*
+ * arch/sh/kernel/head_64.S
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/tlb.h>
+#include <cpu/registers.h>
+#include <cpu/mmu_context.h>
+#include <asm/thread_info.h>
+
+/*
+ * MMU defines: TLB boundaries.
+ */
+
+#define MMUIR_FIRST	ITLB_FIXED
+#define MMUIR_END	ITLB_LAST_VAR_UNRESTRICTED+TLB_STEP
+#define MMUIR_STEP	TLB_STEP
+
+#define MMUDR_FIRST	DTLB_FIXED
+#define MMUDR_END	DTLB_LAST_VAR_UNRESTRICTED+TLB_STEP
+#define MMUDR_STEP	TLB_STEP
+
+/* Safety check : CONFIG_PAGE_OFFSET has to be a multiple of 512Mb */
+#if (CONFIG_PAGE_OFFSET & ((1UL<<29)-1))
+#error "CONFIG_PAGE_OFFSET must be a multiple of 512Mb"
+#endif
+
+/*
+ * MMU defines: Fixed TLBs.
+ */
+/* Deal safely with the case where the base of RAM is not 512Mb aligned */
+
+#define ALIGN_512M_MASK (0xffffffffe0000000)
+#define ALIGNED_EFFECTIVE ((CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START) & ALIGN_512M_MASK)
+#define ALIGNED_PHYSICAL (CONFIG_MEMORY_START & ALIGN_512M_MASK)
+
+#define MMUIR_TEXT_H	(0x0000000000000003 | ALIGNED_EFFECTIVE)
+			/* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
+
+#define MMUIR_TEXT_L	(0x000000000000009a | ALIGNED_PHYSICAL)
+			/* 512 Mb, Cacheable, Write-back, execute, Not User, Ph. Add. */
+
+#define MMUDR_CACHED_H	0x0000000000000003 | ALIGNED_EFFECTIVE
+			/* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
+#define MMUDR_CACHED_L	0x000000000000015a | ALIGNED_PHYSICAL
+			/* 512 Mb, Cacheable, Write-back, read/write, Not User, Ph. Add. */
+
+#ifdef CONFIG_CACHE_OFF
+#define	ICCR0_INIT_VAL	ICCR0_OFF			/* ICACHE off */
+#else
+#define	ICCR0_INIT_VAL	ICCR0_ON | ICCR0_ICI		/* ICE + ICI */
+#endif
+#define	ICCR1_INIT_VAL	ICCR1_NOLOCK			/* No locking */
+
+#if defined (CONFIG_CACHE_OFF)
+#define	OCCR0_INIT_VAL	OCCR0_OFF			   /* D-cache: off  */
+#elif defined (CONFIG_CACHE_WRITETHROUGH)
+#define	OCCR0_INIT_VAL	OCCR0_ON | OCCR0_OCI | OCCR0_WT	   /* D-cache: on,   */
+							   /* WT, invalidate */
+#elif defined (CONFIG_CACHE_WRITEBACK)
+#define	OCCR0_INIT_VAL	OCCR0_ON | OCCR0_OCI | OCCR0_WB	   /* D-cache: on,   */
+							   /* WB, invalidate */
+#else
+#error preprocessor flag CONFIG_CACHE_... not recognized!
+#endif
+
+#define	OCCR1_INIT_VAL	OCCR1_NOLOCK			   /* No locking     */
+
+	.section	.empty_zero_page, "aw"
+	.global empty_zero_page
+
+empty_zero_page:
+	.long	1		/* MOUNT_ROOT_RDONLY */
+	.long	0		/* RAMDISK_FLAGS */
+	.long	0x0200		/* ORIG_ROOT_DEV */
+	.long	1		/* LOADER_TYPE */
+	.long	0x00800000	/* INITRD_START */
+	.long	0x00800000	/* INITRD_SIZE */
+	.long	0
+
+	.text
+	.balign 4096,0,4096
+
+	.section	.data, "aw"
+	.balign	PAGE_SIZE
+
+	.section	.data, "aw"
+	.balign	PAGE_SIZE
+
+	.global mmu_pdtp_cache
+mmu_pdtp_cache:
+	.space PAGE_SIZE, 0
+
+	.global empty_bad_page
+empty_bad_page:
+	.space PAGE_SIZE, 0
+
+	.global empty_bad_pte_table
+empty_bad_pte_table:
+	.space PAGE_SIZE, 0
+
+	.global	fpu_in_use
+fpu_in_use:	.quad	0
+
+
+	__HEAD
+	.balign L1_CACHE_BYTES
+/*
+ * Condition at the entry of __stext:
+ * . Reset state:
+ *   . SR.FD    = 1		(FPU disabled)
+ *   . SR.BL    = 1		(Exceptions disabled)
+ *   . SR.MD    = 1		(Privileged Mode)
+ *   . SR.MMU   = 0		(MMU Disabled)
+ *   . SR.CD    = 0		(CTC User Visible)
+ *   . SR.IMASK = Undefined	(Interrupt Mask)
+ *
+ * Operations supposed to be performed by __stext:
+ * . prevent speculative fetch onto device memory while MMU is off
+ * . reflect as much as possible SH5 ABI (r15, r26, r27, r18)
+ * . first, save CPU state and set it to something harmless
+ * . any CPU detection and/or endianness settings (?)
+ * . initialize EMI/LMI (but not TMU/RTC/INTC/SCIF): TBD
+ * . set initial TLB entries for cached and uncached regions
+ *   (no fine granularity paging)
+ * . set initial cache state
+ * . enable MMU and caches
+ * . set CPU to a consistent state
+ *   . registers (including stack pointer and current/KCR0)
+ *   . NOT expecting to set Exception handling nor VBR/RESVEC/DCR
+ *     at this stage. This is all to later Linux initialization steps.
+ *   . initialize FPU
+ * . clear BSS
+ * . jump into start_kernel()
+ * . be prepared to hopeless start_kernel() returns.
+ *
+ */
+	.global _stext
+_stext:
+	/*
+	 * Prevent speculative fetch on device memory due to
+	 * uninitialized target registers.
+	 */
+	ptabs/u	ZERO, tr0
+	ptabs/u	ZERO, tr1
+	ptabs/u	ZERO, tr2
+	ptabs/u	ZERO, tr3
+	ptabs/u	ZERO, tr4
+	ptabs/u	ZERO, tr5
+	ptabs/u	ZERO, tr6
+	ptabs/u	ZERO, tr7
+	synci
+
+	/*
+	 * Read/Set CPU state. After this block:
+	 * r29 = Initial SR
+	 */
+	getcon	SR, r29
+	movi	SR_HARMLESS, r20
+	putcon	r20, SR
+
+	/*
+	 * Initialize EMI/LMI. To Be Done.
+	 */
+
+	/*
+	 * CPU detection and/or endianness settings (?). To Be Done.
+	 * Pure PIC code here, please ! Just save state into r30.
+         * After this block:
+	 * r30 = CPU type/Platform Endianness
+	 */
+
+	/*
+	 * Set initial TLB entries for cached and uncached regions.
+	 * Note: PTA/BLINK is PIC code, PTABS/BLINK isn't !
+	 */
+	/* Clear ITLBs */
+	pta	clear_ITLB, tr1
+	movi	MMUIR_FIRST, r21
+	movi	MMUIR_END, r22
+clear_ITLB:
+	putcfg	r21, 0, ZERO		/* Clear MMUIR[n].PTEH.V */
+	addi	r21, MMUIR_STEP, r21
+        bne	r21, r22, tr1
+
+	/* Clear DTLBs */
+	pta	clear_DTLB, tr1
+	movi	MMUDR_FIRST, r21
+	movi	MMUDR_END, r22
+clear_DTLB:
+	putcfg	r21, 0, ZERO		/* Clear MMUDR[n].PTEH.V */
+	addi	r21, MMUDR_STEP, r21
+        bne	r21, r22, tr1
+
+	/* Map one big (512Mb) page for ITLB */
+	movi	MMUIR_FIRST, r21
+	movi	MMUIR_TEXT_L, r22	/* PTEL first */
+	add.l	r22, r63, r22		/* Sign extend */
+	putcfg	r21, 1, r22		/* Set MMUIR[0].PTEL */
+	movi	MMUIR_TEXT_H, r22	/* PTEH last */
+	add.l	r22, r63, r22		/* Sign extend */
+	putcfg	r21, 0, r22		/* Set MMUIR[0].PTEH */
+
+	/* Map one big CACHED (512Mb) page for DTLB */
+	movi	MMUDR_FIRST, r21
+	movi	MMUDR_CACHED_L, r22	/* PTEL first */
+	add.l	r22, r63, r22		/* Sign extend */
+	putcfg	r21, 1, r22		/* Set MMUDR[0].PTEL */
+	movi	MMUDR_CACHED_H, r22	/* PTEH last */
+	add.l	r22, r63, r22		/* Sign extend */
+	putcfg	r21, 0, r22		/* Set MMUDR[0].PTEH */
+
+	/*
+	 * Setup a DTLB translation for SCIF phys.
+	 */
+	addi    r21, MMUDR_STEP, r21
+	movi    0x0a03, r22	/* SCIF phys */
+	shori   0x0148, r22
+	putcfg  r21, 1, r22	/* PTEL first */
+	movi    0xfa03, r22	/* 0xfa030000, fixed SCIF virt */
+	shori   0x0003, r22
+	putcfg  r21, 0, r22	/* PTEH last */
+
+	/*
+	 * Set cache behaviours.
+	 */
+	/* ICache */
+	movi	ICCR_BASE, r21
+	movi	ICCR0_INIT_VAL, r22
+	movi	ICCR1_INIT_VAL, r23
+	putcfg	r21, ICCR_REG0, r22
+	putcfg	r21, ICCR_REG1, r23
+
+	/* OCache */
+	movi	OCCR_BASE, r21
+	movi	OCCR0_INIT_VAL, r22
+	movi	OCCR1_INIT_VAL, r23
+	putcfg	r21, OCCR_REG0, r22
+	putcfg	r21, OCCR_REG1, r23
+
+
+	/*
+	 * Enable Caches and MMU. Do the first non-PIC jump.
+         * Now head.S global variables, constants and externs
+	 * can be used.
+	 */
+	getcon	SR, r21
+	movi	SR_ENABLE_MMU, r22
+	or	r21, r22, r21
+	putcon	r21, SSR
+	movi	hyperspace, r22
+	ori	r22, 1, r22	    /* Make it SHmedia, not required but..*/
+	putcon	r22, SPC
+	synco
+	rte			    /* And now go into the hyperspace ... */
+hyperspace:			    /* ... that's the next instruction !  */
+
+	/*
+	 * Set CPU to a consistent state.
+	 * r31 = FPU support flag
+	 * tr0/tr7 in use. Others give a chance to loop somewhere safe
+	 */
+	movi	start_kernel, r32
+	ori	r32, 1, r32
+
+	ptabs	r32, tr0		    /* r32 = _start_kernel address        */
+	pta/u	hopeless, tr1
+	pta/u	hopeless, tr2
+	pta/u	hopeless, tr3
+	pta/u	hopeless, tr4
+	pta/u	hopeless, tr5
+	pta/u	hopeless, tr6
+	pta/u	hopeless, tr7
+	gettr	tr1, r28			/* r28 = hopeless address */
+
+	/* Set initial stack pointer */
+	movi	init_thread_union, SP
+	putcon	SP, KCR0		/* Set current to init_task */
+	movi	THREAD_SIZE, r22	/* Point to the end */
+	add	SP, r22, SP
+
+	/*
+	 * Initialize FPU.
+	 * Keep FPU flag in r31. After this block:
+	 * r31 = FPU flag
+	 */
+	movi fpu_in_use, r31	/* Temporary */
+
+#ifdef CONFIG_SH_FPU
+	getcon	SR, r21
+	movi	SR_ENABLE_FPU, r22
+	and	r21, r22, r22
+	putcon	r22, SR			/* Try to enable */
+	getcon	SR, r22
+	xor	r21, r22, r21
+	shlri	r21, 15, r21		/* Supposedly 0/1 */
+	st.q	r31, 0 , r21		/* Set fpu_in_use */
+#else
+	movi	0, r21
+	st.q	r31, 0 , r21		/* Set fpu_in_use */
+#endif
+	or	r21, ZERO, r31		/* Set FPU flag at last */
+
+#ifndef CONFIG_SH_NO_BSS_INIT
+/* Don't clear BSS if running on slow platforms such as an RTL simulation,
+   remote memory via SHdebug link, etc.  For these the memory can be guaranteed
+   to be all zero on boot anyway. */
+	/*
+	 * Clear bss
+	 */
+	pta	clear_quad, tr1
+	movi	__bss_start, r22
+	movi	_end, r23
+clear_quad:
+	st.q	r22, 0, ZERO
+	addi	r22, 8, r22
+	bne	r22, r23, tr1		/* Both quad aligned, see vmlinux.lds.S */
+#endif
+	pta/u	hopeless, tr1
+
+	/* Say bye to head.S but be prepared to wrongly get back ... */
+	blink	tr0, LINK
+
+	/* If we ever get back here through LINK/tr1-tr7 */
+	pta/u	hopeless, tr7
+
+hopeless:
+	/*
+	 * Something's badly wrong here. Loop endlessly,
+         * there's nothing more we can do about it.
+	 *
+	 * Note on hopeless: it can be jumped into invariably
+	 * before or after jumping into hyperspace. The only
+	 * requirement is to be PIC called (PTA) before and
+	 * any way (PTA/PTABS) after. According to Virtual
+	 * to Physical mapping a simulator/emulator can easily
+	 * tell where we came here from just looking at hopeless
+	 * (PC) address.
+	 *
+	 * For debugging purposes:
+	 * (r28) hopeless/loop address
+	 * (r29) Original SR
+	 * (r30) CPU type/Platform endianness
+	 * (r31) FPU Support
+	 * (r32) _start_kernel address
+	 */
+	blink	tr7, ZERO
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/hw_breakpoint.c b/src/kernel/linux/v4.14/arch/sh/kernel/hw_breakpoint.c
new file mode 100644
index 0000000..dea2e23
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/hw_breakpoint.c
@@ -0,0 +1,423 @@
+/*
+ * arch/sh/kernel/hw_breakpoint.c
+ *
+ * Unified kernel/user-space hardware breakpoint facility for the on-chip UBC.
+ *
+ * Copyright (C) 2009 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/perf_event.h>
+#include <linux/sched/signal.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/percpu.h>
+#include <linux/kallsyms.h>
+#include <linux/notifier.h>
+#include <linux/kprobes.h>
+#include <linux/kdebug.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <asm/hw_breakpoint.h>
+#include <asm/mmu_context.h>
+#include <asm/ptrace.h>
+#include <asm/traps.h>
+
+/*
+ * Stores the breakpoints currently in use on each breakpoint address
+ * register for each cpus
+ */
+static DEFINE_PER_CPU(struct perf_event *, bp_per_reg[HBP_NUM]);
+
+/*
+ * A dummy placeholder for early accesses until the CPUs get a chance to
+ * register their UBCs later in the boot process.
+ */
+static struct sh_ubc ubc_dummy = { .num_events = 0 };
+
+static struct sh_ubc *sh_ubc __read_mostly = &ubc_dummy;
+
+/*
+ * Install a perf counter breakpoint.
+ *
+ * We seek a free UBC channel and use it for this breakpoint.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
+ */
+int arch_install_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	int i;
+
+	for (i = 0; i < sh_ubc->num_events; i++) {
+		struct perf_event **slot = this_cpu_ptr(&bp_per_reg[i]);
+
+		if (!*slot) {
+			*slot = bp;
+			break;
+		}
+	}
+
+	if (WARN_ONCE(i == sh_ubc->num_events, "Can't find any breakpoint slot"))
+		return -EBUSY;
+
+	clk_enable(sh_ubc->clk);
+	sh_ubc->enable(info, i);
+
+	return 0;
+}
+
+/*
+ * Uninstall the breakpoint contained in the given counter.
+ *
+ * First we search the debug address register it uses and then we disable
+ * it.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
+ */
+void arch_uninstall_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	int i;
+
+	for (i = 0; i < sh_ubc->num_events; i++) {
+		struct perf_event **slot = this_cpu_ptr(&bp_per_reg[i]);
+
+		if (*slot == bp) {
+			*slot = NULL;
+			break;
+		}
+	}
+
+	if (WARN_ONCE(i == sh_ubc->num_events, "Can't find any breakpoint slot"))
+		return;
+
+	sh_ubc->disable(info, i);
+	clk_disable(sh_ubc->clk);
+}
+
+static int get_hbp_len(u16 hbp_len)
+{
+	unsigned int len_in_bytes = 0;
+
+	switch (hbp_len) {
+	case SH_BREAKPOINT_LEN_1:
+		len_in_bytes = 1;
+		break;
+	case SH_BREAKPOINT_LEN_2:
+		len_in_bytes = 2;
+		break;
+	case SH_BREAKPOINT_LEN_4:
+		len_in_bytes = 4;
+		break;
+	case SH_BREAKPOINT_LEN_8:
+		len_in_bytes = 8;
+		break;
+	}
+	return len_in_bytes;
+}
+
+/*
+ * Check for virtual address in kernel space.
+ */
+int arch_check_bp_in_kernelspace(struct perf_event *bp)
+{
+	unsigned int len;
+	unsigned long va;
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	va = info->address;
+	len = get_hbp_len(info->len);
+
+	return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
+}
+
+int arch_bp_generic_fields(int sh_len, int sh_type,
+			   int *gen_len, int *gen_type)
+{
+	/* Len */
+	switch (sh_len) {
+	case SH_BREAKPOINT_LEN_1:
+		*gen_len = HW_BREAKPOINT_LEN_1;
+		break;
+	case SH_BREAKPOINT_LEN_2:
+		*gen_len = HW_BREAKPOINT_LEN_2;
+		break;
+	case SH_BREAKPOINT_LEN_4:
+		*gen_len = HW_BREAKPOINT_LEN_4;
+		break;
+	case SH_BREAKPOINT_LEN_8:
+		*gen_len = HW_BREAKPOINT_LEN_8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Type */
+	switch (sh_type) {
+	case SH_BREAKPOINT_READ:
+		*gen_type = HW_BREAKPOINT_R;
+		break;
+	case SH_BREAKPOINT_WRITE:
+		*gen_type = HW_BREAKPOINT_W;
+		break;
+	case SH_BREAKPOINT_RW:
+		*gen_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int arch_build_bp_info(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	info->address = bp->attr.bp_addr;
+
+	/* Len */
+	switch (bp->attr.bp_len) {
+	case HW_BREAKPOINT_LEN_1:
+		info->len = SH_BREAKPOINT_LEN_1;
+		break;
+	case HW_BREAKPOINT_LEN_2:
+		info->len = SH_BREAKPOINT_LEN_2;
+		break;
+	case HW_BREAKPOINT_LEN_4:
+		info->len = SH_BREAKPOINT_LEN_4;
+		break;
+	case HW_BREAKPOINT_LEN_8:
+		info->len = SH_BREAKPOINT_LEN_8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Type */
+	switch (bp->attr.bp_type) {
+	case HW_BREAKPOINT_R:
+		info->type = SH_BREAKPOINT_READ;
+		break;
+	case HW_BREAKPOINT_W:
+		info->type = SH_BREAKPOINT_WRITE;
+		break;
+	case HW_BREAKPOINT_W | HW_BREAKPOINT_R:
+		info->type = SH_BREAKPOINT_RW;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Validate the arch-specific HW Breakpoint register settings
+ */
+int arch_validate_hwbkpt_settings(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	unsigned int align;
+	int ret;
+
+	ret = arch_build_bp_info(bp);
+	if (ret)
+		return ret;
+
+	ret = -EINVAL;
+
+	switch (info->len) {
+	case SH_BREAKPOINT_LEN_1:
+		align = 0;
+		break;
+	case SH_BREAKPOINT_LEN_2:
+		align = 1;
+		break;
+	case SH_BREAKPOINT_LEN_4:
+		align = 3;
+		break;
+	case SH_BREAKPOINT_LEN_8:
+		align = 7;
+		break;
+	default:
+		return ret;
+	}
+
+	/*
+	 * For kernel-addresses, either the address or symbol name can be
+	 * specified.
+	 */
+	if (info->name)
+		info->address = (unsigned long)kallsyms_lookup_name(info->name);
+
+	/*
+	 * Check that the low-order bits of the address are appropriate
+	 * for the alignment implied by len.
+	 */
+	if (info->address & align)
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * Release the user breakpoints used by ptrace
+ */
+void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+	int i;
+	struct thread_struct *t = &tsk->thread;
+
+	for (i = 0; i < sh_ubc->num_events; i++) {
+		unregister_hw_breakpoint(t->ptrace_bps[i]);
+		t->ptrace_bps[i] = NULL;
+	}
+}
+
+static int __kprobes hw_breakpoint_handler(struct die_args *args)
+{
+	int cpu, i, rc = NOTIFY_STOP;
+	struct perf_event *bp;
+	unsigned int cmf, resume_mask;
+
+	/*
+	 * Do an early return if none of the channels triggered.
+	 */
+	cmf = sh_ubc->triggered_mask();
+	if (unlikely(!cmf))
+		return NOTIFY_DONE;
+
+	/*
+	 * By default, resume all of the active channels.
+	 */
+	resume_mask = sh_ubc->active_mask();
+
+	/*
+	 * Disable breakpoints during exception handling.
+	 */
+	sh_ubc->disable_all();
+
+	cpu = get_cpu();
+	for (i = 0; i < sh_ubc->num_events; i++) {
+		unsigned long event_mask = (1 << i);
+
+		if (likely(!(cmf & event_mask)))
+			continue;
+
+		/*
+		 * The counter may be concurrently released but that can only
+		 * occur from a call_rcu() path. We can then safely fetch
+		 * the breakpoint, use its callback, touch its counter
+		 * while we are in an rcu_read_lock() path.
+		 */
+		rcu_read_lock();
+
+		bp = per_cpu(bp_per_reg[i], cpu);
+		if (bp)
+			rc = NOTIFY_DONE;
+
+		/*
+		 * Reset the condition match flag to denote completion of
+		 * exception handling.
+		 */
+		sh_ubc->clear_triggered_mask(event_mask);
+
+		/*
+		 * bp can be NULL due to concurrent perf counter
+		 * removing.
+		 */
+		if (!bp) {
+			rcu_read_unlock();
+			break;
+		}
+
+		/*
+		 * Don't restore the channel if the breakpoint is from
+		 * ptrace, as it always operates in one-shot mode.
+		 */
+		if (bp->overflow_handler == ptrace_triggered)
+			resume_mask &= ~(1 << i);
+
+		perf_bp_event(bp, args->regs);
+
+		/* Deliver the signal to userspace */
+		if (!arch_check_bp_in_kernelspace(bp)) {
+			siginfo_t info;
+
+			info.si_signo = args->signr;
+			info.si_errno = notifier_to_errno(rc);
+			info.si_code = TRAP_HWBKPT;
+
+			force_sig_info(args->signr, &info, current);
+		}
+
+		rcu_read_unlock();
+	}
+
+	if (cmf == 0)
+		rc = NOTIFY_DONE;
+
+	sh_ubc->enable_all(resume_mask);
+
+	put_cpu();
+
+	return rc;
+}
+
+BUILD_TRAP_HANDLER(breakpoint)
+{
+	unsigned long ex = lookup_exception_vector();
+	TRAP_HANDLER_DECL;
+
+	notify_die(DIE_BREAKPOINT, "breakpoint", regs, 0, ex, SIGTRAP);
+}
+
+/*
+ * Handle debug exception notifications.
+ */
+int __kprobes hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+				    unsigned long val, void *data)
+{
+	struct die_args *args = data;
+
+	if (val != DIE_BREAKPOINT)
+		return NOTIFY_DONE;
+
+	/*
+	 * If the breakpoint hasn't been triggered by the UBC, it's
+	 * probably from a debugger, so don't do anything more here.
+	 *
+	 * This also permits the UBC interface clock to remain off for
+	 * non-UBC breakpoints, as we don't need to check the triggered
+	 * or active channel masks.
+	 */
+	if (args->trapnr != sh_ubc->trap_nr)
+		return NOTIFY_DONE;
+
+	return hw_breakpoint_handler(data);
+}
+
+void hw_breakpoint_pmu_read(struct perf_event *bp)
+{
+	/* TODO */
+}
+
+int register_sh_ubc(struct sh_ubc *ubc)
+{
+	/* Bail if it's already assigned */
+	if (sh_ubc != &ubc_dummy)
+		return -EBUSY;
+	sh_ubc = ubc;
+
+	pr_info("HW Breakpoints: %s UBC support registered\n", ubc->name);
+
+	WARN_ON(ubc->num_events > HBP_NUM);
+
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/idle.c b/src/kernel/linux/v4.14/arch/sh/kernel/idle.c
new file mode 100644
index 0000000..be616ee
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/idle.c
@@ -0,0 +1,61 @@
+/*
+ * The idle loop for all SuperH platforms.
+ *
+ *  Copyright (C) 2002 - 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/pm.h>
+#include <linux/tick.h>
+#include <linux/preempt.h>
+#include <linux/thread_info.h>
+#include <linux/irqflags.h>
+#include <linux/smp.h>
+#include <linux/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/smp.h>
+#include <asm/bl_bit.h>
+
+static void (*sh_idle)(void);
+
+void default_idle(void)
+{
+	set_bl_bit();
+	local_irq_enable();
+	/* Isn't this racy ? */
+	cpu_sleep();
+	clear_bl_bit();
+}
+
+void arch_cpu_idle_dead(void)
+{
+	play_dead();
+}
+
+void arch_cpu_idle(void)
+{
+	sh_idle();
+}
+
+void __init select_idle_routine(void)
+{
+	/*
+	 * If a platform has set its own idle routine, leave it alone.
+	 */
+	if (!sh_idle)
+		sh_idle = default_idle;
+}
+
+void stop_this_cpu(void *unused)
+{
+	local_irq_disable();
+	set_cpu_online(smp_processor_id(), false);
+
+	for (;;)
+		cpu_sleep();
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/io.c b/src/kernel/linux/v4.14/arch/sh/kernel/io.c
new file mode 100644
index 0000000..5c51b79
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/io.c
@@ -0,0 +1,114 @@
+/*
+ * arch/sh/kernel/io.c - Machine independent I/O functions.
+ *
+ * Copyright (C) 2000 - 2009  Stuart Menefy
+ * Copyright (C) 2005  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+/*
+ * Copy data from IO memory space to "real" memory space.
+ */
+void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned long count)
+{
+	/*
+	 * Would it be worthwhile doing byte and long transfers first
+	 * to try and get aligned?
+	 */
+#ifdef CONFIG_CPU_SH4
+	if ((count >= 0x20) &&
+	     (((u32)to & 0x1f) == 0) && (((u32)from & 0x3) == 0)) {
+		int tmp2, tmp3, tmp4, tmp5, tmp6;
+
+		__asm__ __volatile__(
+			"1:			\n\t"
+			"mov.l	@%7+, r0	\n\t"
+			"mov.l	@%7+, %2	\n\t"
+			"movca.l r0, @%0	\n\t"
+			"mov.l	@%7+, %3	\n\t"
+			"mov.l	@%7+, %4	\n\t"
+			"mov.l	@%7+, %5	\n\t"
+			"mov.l	@%7+, %6	\n\t"
+			"mov.l	@%7+, r7	\n\t"
+			"mov.l	@%7+, r0	\n\t"
+			"mov.l	%2, @(0x04,%0)	\n\t"
+			"mov	#0x20, %2	\n\t"
+			"mov.l	%3, @(0x08,%0)	\n\t"
+			"sub	%2, %1		\n\t"
+			"mov.l	%4, @(0x0c,%0)	\n\t"
+			"cmp/hi	%1, %2		! T if 32 > count	\n\t"
+			"mov.l	%5, @(0x10,%0)	\n\t"
+			"mov.l	%6, @(0x14,%0)	\n\t"
+			"mov.l	r7, @(0x18,%0)	\n\t"
+			"mov.l	r0, @(0x1c,%0)	\n\t"
+			"bf.s	1b		\n\t"
+			" add	#0x20, %0	\n\t"
+			: "=&r" (to), "=&r" (count),
+			  "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4),
+			  "=&r" (tmp5), "=&r" (tmp6), "=&r" (from)
+			: "7"(from), "0" (to), "1" (count)
+			: "r0", "r7", "t", "memory");
+	}
+#endif
+
+	if ((((u32)to | (u32)from) & 0x3) == 0) {
+		for (; count > 3; count -= 4) {
+			*(u32 *)to = *(volatile u32 *)from;
+			to += 4;
+			from += 4;
+		}
+	}
+
+	for (; count > 0; count--) {
+		*(u8 *)to = *(volatile u8 *)from;
+		to++;
+		from++;
+	}
+
+	mb();
+}
+EXPORT_SYMBOL(memcpy_fromio);
+
+/*
+ * Copy data from "real" memory space to IO memory space.
+ */
+void memcpy_toio(volatile void __iomem *to, const void *from, unsigned long count)
+{
+	if ((((u32)to | (u32)from) & 0x3) == 0) {
+		for ( ; count > 3; count -= 4) {
+			*(volatile u32 *)to = *(u32 *)from;
+			to += 4;
+			from += 4;
+		}
+	}
+
+	for (; count > 0; count--) {
+		*(volatile u8 *)to = *(u8 *)from;
+		to++;
+		from++;
+	}
+
+	mb();
+}
+EXPORT_SYMBOL(memcpy_toio);
+
+/*
+ * "memset" on IO memory space.
+ * This needs to be optimized.
+ */
+void memset_io(volatile void __iomem *dst, int c, unsigned long count)
+{
+        while (count) {
+                count--;
+                writeb(c, dst);
+                dst++;
+        }
+}
+EXPORT_SYMBOL(memset_io);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/io_trapped.c b/src/kernel/linux/v4.14/arch/sh/kernel/io_trapped.c
new file mode 100644
index 0000000..4d4e7a2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/io_trapped.c
@@ -0,0 +1,296 @@
+/*
+ * Trapped io support
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Intercept io operations by trapping.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/bitops.h>
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <asm/mmu_context.h>
+#include <linux/uaccess.h>
+#include <asm/io.h>
+#include <asm/io_trapped.h>
+
+#define TRAPPED_PAGES_MAX 16
+
+#ifdef CONFIG_HAS_IOPORT_MAP
+LIST_HEAD(trapped_io);
+EXPORT_SYMBOL_GPL(trapped_io);
+#endif
+#ifdef CONFIG_HAS_IOMEM
+LIST_HEAD(trapped_mem);
+EXPORT_SYMBOL_GPL(trapped_mem);
+#endif
+static DEFINE_SPINLOCK(trapped_lock);
+
+static int trapped_io_disable __read_mostly;
+
+static int __init trapped_io_setup(char *__unused)
+{
+	trapped_io_disable = 1;
+	return 1;
+}
+__setup("noiotrap", trapped_io_setup);
+
+int register_trapped_io(struct trapped_io *tiop)
+{
+	struct resource *res;
+	unsigned long len = 0, flags = 0;
+	struct page *pages[TRAPPED_PAGES_MAX];
+	int k, n;
+
+	if (unlikely(trapped_io_disable))
+		return 0;
+
+	/* structure must be page aligned */
+	if ((unsigned long)tiop & (PAGE_SIZE - 1))
+		goto bad;
+
+	for (k = 0; k < tiop->num_resources; k++) {
+		res = tiop->resource + k;
+		len += roundup(resource_size(res), PAGE_SIZE);
+		flags |= res->flags;
+	}
+
+	/* support IORESOURCE_IO _or_ MEM, not both */
+	if (hweight_long(flags) != 1)
+		goto bad;
+
+	n = len >> PAGE_SHIFT;
+
+	if (n >= TRAPPED_PAGES_MAX)
+		goto bad;
+
+	for (k = 0; k < n; k++)
+		pages[k] = virt_to_page(tiop);
+
+	tiop->virt_base = vmap(pages, n, VM_MAP, PAGE_NONE);
+	if (!tiop->virt_base)
+		goto bad;
+
+	len = 0;
+	for (k = 0; k < tiop->num_resources; k++) {
+		res = tiop->resource + k;
+		pr_info("trapped io 0x%08lx overrides %s 0x%08lx\n",
+		       (unsigned long)(tiop->virt_base + len),
+		       res->flags & IORESOURCE_IO ? "io" : "mmio",
+		       (unsigned long)res->start);
+		len += roundup(resource_size(res), PAGE_SIZE);
+	}
+
+	tiop->magic = IO_TRAPPED_MAGIC;
+	INIT_LIST_HEAD(&tiop->list);
+	spin_lock_irq(&trapped_lock);
+#ifdef CONFIG_HAS_IOPORT_MAP
+	if (flags & IORESOURCE_IO)
+		list_add(&tiop->list, &trapped_io);
+#endif
+#ifdef CONFIG_HAS_IOMEM
+	if (flags & IORESOURCE_MEM)
+		list_add(&tiop->list, &trapped_mem);
+#endif
+	spin_unlock_irq(&trapped_lock);
+
+	return 0;
+ bad:
+	pr_warning("unable to install trapped io filter\n");
+	return -1;
+}
+EXPORT_SYMBOL_GPL(register_trapped_io);
+
+void __iomem *match_trapped_io_handler(struct list_head *list,
+				       unsigned long offset,
+				       unsigned long size)
+{
+	unsigned long voffs;
+	struct trapped_io *tiop;
+	struct resource *res;
+	int k, len;
+	unsigned long flags;
+
+	spin_lock_irqsave(&trapped_lock, flags);
+	list_for_each_entry(tiop, list, list) {
+		voffs = 0;
+		for (k = 0; k < tiop->num_resources; k++) {
+			res = tiop->resource + k;
+			if (res->start == offset) {
+				spin_unlock_irqrestore(&trapped_lock, flags);
+				return tiop->virt_base + voffs;
+			}
+
+			len = resource_size(res);
+			voffs += roundup(len, PAGE_SIZE);
+		}
+	}
+	spin_unlock_irqrestore(&trapped_lock, flags);
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(match_trapped_io_handler);
+
+static struct trapped_io *lookup_tiop(unsigned long address)
+{
+	pgd_t *pgd_k;
+	pud_t *pud_k;
+	pmd_t *pmd_k;
+	pte_t *pte_k;
+	pte_t entry;
+
+	pgd_k = swapper_pg_dir + pgd_index(address);
+	if (!pgd_present(*pgd_k))
+		return NULL;
+
+	pud_k = pud_offset(pgd_k, address);
+	if (!pud_present(*pud_k))
+		return NULL;
+
+	pmd_k = pmd_offset(pud_k, address);
+	if (!pmd_present(*pmd_k))
+		return NULL;
+
+	pte_k = pte_offset_kernel(pmd_k, address);
+	entry = *pte_k;
+
+	return pfn_to_kaddr(pte_pfn(entry));
+}
+
+static unsigned long lookup_address(struct trapped_io *tiop,
+				    unsigned long address)
+{
+	struct resource *res;
+	unsigned long vaddr = (unsigned long)tiop->virt_base;
+	unsigned long len;
+	int k;
+
+	for (k = 0; k < tiop->num_resources; k++) {
+		res = tiop->resource + k;
+		len = roundup(resource_size(res), PAGE_SIZE);
+		if (address < (vaddr + len))
+			return res->start + (address - vaddr);
+		vaddr += len;
+	}
+	return 0;
+}
+
+static unsigned long long copy_word(unsigned long src_addr, int src_len,
+				    unsigned long dst_addr, int dst_len)
+{
+	unsigned long long tmp = 0;
+
+	switch (src_len) {
+	case 1:
+		tmp = __raw_readb(src_addr);
+		break;
+	case 2:
+		tmp = __raw_readw(src_addr);
+		break;
+	case 4:
+		tmp = __raw_readl(src_addr);
+		break;
+	case 8:
+		tmp = __raw_readq(src_addr);
+		break;
+	}
+
+	switch (dst_len) {
+	case 1:
+		__raw_writeb(tmp, dst_addr);
+		break;
+	case 2:
+		__raw_writew(tmp, dst_addr);
+		break;
+	case 4:
+		__raw_writel(tmp, dst_addr);
+		break;
+	case 8:
+		__raw_writeq(tmp, dst_addr);
+		break;
+	}
+
+	return tmp;
+}
+
+static unsigned long from_device(void *dst, const void *src, unsigned long cnt)
+{
+	struct trapped_io *tiop;
+	unsigned long src_addr = (unsigned long)src;
+	unsigned long long tmp;
+
+	pr_debug("trapped io read 0x%08lx (%ld)\n", src_addr, cnt);
+	tiop = lookup_tiop(src_addr);
+	WARN_ON(!tiop || (tiop->magic != IO_TRAPPED_MAGIC));
+
+	src_addr = lookup_address(tiop, src_addr);
+	if (!src_addr)
+		return cnt;
+
+	tmp = copy_word(src_addr,
+			max_t(unsigned long, cnt,
+			      (tiop->minimum_bus_width / 8)),
+			(unsigned long)dst, cnt);
+
+	pr_debug("trapped io read 0x%08lx -> 0x%08llx\n", src_addr, tmp);
+	return 0;
+}
+
+static unsigned long to_device(void *dst, const void *src, unsigned long cnt)
+{
+	struct trapped_io *tiop;
+	unsigned long dst_addr = (unsigned long)dst;
+	unsigned long long tmp;
+
+	pr_debug("trapped io write 0x%08lx (%ld)\n", dst_addr, cnt);
+	tiop = lookup_tiop(dst_addr);
+	WARN_ON(!tiop || (tiop->magic != IO_TRAPPED_MAGIC));
+
+	dst_addr = lookup_address(tiop, dst_addr);
+	if (!dst_addr)
+		return cnt;
+
+	tmp = copy_word((unsigned long)src, cnt,
+			dst_addr, max_t(unsigned long, cnt,
+					(tiop->minimum_bus_width / 8)));
+
+	pr_debug("trapped io write 0x%08lx -> 0x%08llx\n", dst_addr, tmp);
+	return 0;
+}
+
+static struct mem_access trapped_io_access = {
+	from_device,
+	to_device,
+};
+
+int handle_trapped_io(struct pt_regs *regs, unsigned long address)
+{
+	mm_segment_t oldfs;
+	insn_size_t instruction;
+	int tmp;
+
+	if (trapped_io_disable)
+		return 0;
+	if (!lookup_tiop(address))
+		return 0;
+
+	WARN_ON(user_mode(regs));
+
+	oldfs = get_fs();
+	set_fs(KERNEL_DS);
+	if (copy_from_user(&instruction, (void *)(regs->pc),
+			   sizeof(instruction))) {
+		set_fs(oldfs);
+		return 0;
+	}
+
+	tmp = handle_unaligned_access(instruction, regs,
+				      &trapped_io_access, 1, address);
+	set_fs(oldfs);
+	return tmp == 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/iomap.c b/src/kernel/linux/v4.14/arch/sh/kernel/iomap.c
new file mode 100644
index 0000000..2e8e8b9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/iomap.c
@@ -0,0 +1,165 @@
+/*
+ * arch/sh/kernel/iomap.c
+ *
+ * Copyright (C) 2000  Niibe Yutaka
+ * Copyright (C) 2005 - 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+
+unsigned int ioread8(void __iomem *addr)
+{
+	return readb(addr);
+}
+EXPORT_SYMBOL(ioread8);
+
+unsigned int ioread16(void __iomem *addr)
+{
+	return readw(addr);
+}
+EXPORT_SYMBOL(ioread16);
+
+unsigned int ioread16be(void __iomem *addr)
+{
+	return be16_to_cpu(__raw_readw(addr));
+}
+EXPORT_SYMBOL(ioread16be);
+
+unsigned int ioread32(void __iomem *addr)
+{
+	return readl(addr);
+}
+EXPORT_SYMBOL(ioread32);
+
+unsigned int ioread32be(void __iomem *addr)
+{
+	return be32_to_cpu(__raw_readl(addr));
+}
+EXPORT_SYMBOL(ioread32be);
+
+void iowrite8(u8 val, void __iomem *addr)
+{
+	writeb(val, addr);
+}
+EXPORT_SYMBOL(iowrite8);
+
+void iowrite16(u16 val, void __iomem *addr)
+{
+	writew(val, addr);
+}
+EXPORT_SYMBOL(iowrite16);
+
+void iowrite16be(u16 val, void __iomem *addr)
+{
+	__raw_writew(cpu_to_be16(val), addr);
+}
+EXPORT_SYMBOL(iowrite16be);
+
+void iowrite32(u32 val, void __iomem *addr)
+{
+	writel(val, addr);
+}
+EXPORT_SYMBOL(iowrite32);
+
+void iowrite32be(u32 val, void __iomem *addr)
+{
+	__raw_writel(cpu_to_be32(val), addr);
+}
+EXPORT_SYMBOL(iowrite32be);
+
+/*
+ * These are the "repeat MMIO read/write" functions.
+ * Note the "__raw" accesses, since we don't want to
+ * convert to CPU byte order. We write in "IO byte
+ * order" (we also don't have IO barriers).
+ */
+static inline void mmio_insb(void __iomem *addr, u8 *dst, int count)
+{
+	while (--count >= 0) {
+		u8 data = __raw_readb(addr);
+		*dst = data;
+		dst++;
+	}
+}
+
+static inline void mmio_insw(void __iomem *addr, u16 *dst, int count)
+{
+	while (--count >= 0) {
+		u16 data = __raw_readw(addr);
+		*dst = data;
+		dst++;
+	}
+}
+
+static inline void mmio_insl(void __iomem *addr, u32 *dst, int count)
+{
+	while (--count >= 0) {
+		u32 data = __raw_readl(addr);
+		*dst = data;
+		dst++;
+	}
+}
+
+static inline void mmio_outsb(void __iomem *addr, const u8 *src, int count)
+{
+	while (--count >= 0) {
+		__raw_writeb(*src, addr);
+		src++;
+	}
+}
+
+static inline void mmio_outsw(void __iomem *addr, const u16 *src, int count)
+{
+	while (--count >= 0) {
+		__raw_writew(*src, addr);
+		src++;
+	}
+}
+
+static inline void mmio_outsl(void __iomem *addr, const u32 *src, int count)
+{
+	while (--count >= 0) {
+		__raw_writel(*src, addr);
+		src++;
+	}
+}
+
+void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+	mmio_insb(addr, dst, count);
+}
+EXPORT_SYMBOL(ioread8_rep);
+
+void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+	mmio_insw(addr, dst, count);
+}
+EXPORT_SYMBOL(ioread16_rep);
+
+void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+	mmio_insl(addr, dst, count);
+}
+EXPORT_SYMBOL(ioread32_rep);
+
+void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	mmio_outsb(addr, src, count);
+}
+EXPORT_SYMBOL(iowrite8_rep);
+
+void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	mmio_outsw(addr, src, count);
+}
+EXPORT_SYMBOL(iowrite16_rep);
+
+void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	mmio_outsl(addr, src, count);
+}
+EXPORT_SYMBOL(iowrite32_rep);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/ioport.c b/src/kernel/linux/v4.14/arch/sh/kernel/ioport.c
new file mode 100644
index 0000000..cca14ba
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/ioport.c
@@ -0,0 +1,43 @@
+/*
+ * arch/sh/kernel/ioport.c
+ *
+ * Copyright (C) 2000  Niibe Yutaka
+ * Copyright (C) 2005 - 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+
+unsigned long sh_io_port_base __read_mostly = -1;
+EXPORT_SYMBOL(sh_io_port_base);
+
+void __iomem *__ioport_map(unsigned long addr, unsigned int size)
+{
+	if (sh_mv.mv_ioport_map)
+		return sh_mv.mv_ioport_map(addr, size);
+
+	return (void __iomem *)(addr + sh_io_port_base);
+}
+EXPORT_SYMBOL(__ioport_map);
+
+void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	void __iomem *ret;
+
+	ret = __ioport_map_trapped(port, nr);
+	if (ret)
+		return ret;
+
+	return __ioport_map(port, nr);
+}
+EXPORT_SYMBOL(ioport_map);
+
+void ioport_unmap(void __iomem *addr)
+{
+	if (sh_mv.mv_ioport_unmap)
+		sh_mv.mv_ioport_unmap(addr);
+}
+EXPORT_SYMBOL(ioport_unmap);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/irq.c b/src/kernel/linux/v4.14/arch/sh/kernel/irq.c
new file mode 100644
index 0000000..245dbeb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/irq.c
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/kernel/irq.c
+ *
+ *	Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
+ *
+ *
+ * SuperH version:  Copyright (C) 1999  Niibe Yutaka
+ */
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/kernel_stat.h>
+#include <linux/seq_file.h>
+#include <linux/ftrace.h>
+#include <linux/delay.h>
+#include <linux/ratelimit.h>
+#include <asm/processor.h>
+#include <asm/machvec.h>
+#include <linux/uaccess.h>
+#include <asm/thread_info.h>
+#include <cpu/mmu_context.h>
+
+atomic_t irq_err_count;
+
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves, it doesn't deserve
+ * a generic callback i think.
+ */
+void ack_bad_irq(unsigned int irq)
+{
+	atomic_inc(&irq_err_count);
+	printk("unexpected IRQ trap at vector %02x\n", irq);
+}
+
+#if defined(CONFIG_PROC_FS)
+/*
+ * /proc/interrupts printing for arch specific interrupts
+ */
+int arch_show_interrupts(struct seq_file *p, int prec)
+{
+	int j;
+
+	seq_printf(p, "%*s: ", prec, "NMI");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stat[j].__nmi_count);
+	seq_printf(p, "  Non-maskable interrupts\n");
+
+	seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_IRQSTACKS
+/*
+ * per-CPU IRQ handling contexts (thread information and stack)
+ */
+union irq_ctx {
+	struct thread_info	tinfo;
+	u32			stack[THREAD_SIZE/sizeof(u32)];
+};
+
+static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
+static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
+
+static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
+static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
+
+static inline void handle_one_irq(unsigned int irq)
+{
+	union irq_ctx *curctx, *irqctx;
+
+	curctx = (union irq_ctx *)current_thread_info();
+	irqctx = hardirq_ctx[smp_processor_id()];
+
+	/*
+	 * this is where we switch to the IRQ stack. However, if we are
+	 * already using the IRQ stack (because we interrupted a hardirq
+	 * handler) we can't do that and just have to keep using the
+	 * current stack (which is the irq stack already after all)
+	 */
+	if (curctx != irqctx) {
+		u32 *isp;
+
+		isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
+		irqctx->tinfo.task = curctx->tinfo.task;
+		irqctx->tinfo.previous_sp = current_stack_pointer;
+
+		/*
+		 * Copy the softirq bits in preempt_count so that the
+		 * softirq checks work in the hardirq context.
+		 */
+		irqctx->tinfo.preempt_count =
+			(irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) |
+			(curctx->tinfo.preempt_count & SOFTIRQ_MASK);
+
+		__asm__ __volatile__ (
+			"mov	%0, r4		\n"
+			"mov	r15, r8		\n"
+			"jsr	@%1		\n"
+			/* switch to the irq stack */
+			" mov	%2, r15		\n"
+			/* restore the stack (ring zero) */
+			"mov	r8, r15		\n"
+			: /* no outputs */
+			: "r" (irq), "r" (generic_handle_irq), "r" (isp)
+			: "memory", "r0", "r1", "r2", "r3", "r4",
+			  "r5", "r6", "r7", "r8", "t", "pr"
+		);
+	} else
+		generic_handle_irq(irq);
+}
+
+/*
+ * allocate per-cpu stacks for hardirq and for softirq processing
+ */
+void irq_ctx_init(int cpu)
+{
+	union irq_ctx *irqctx;
+
+	if (hardirq_ctx[cpu])
+		return;
+
+	irqctx = (union irq_ctx *)&hardirq_stack[cpu * THREAD_SIZE];
+	irqctx->tinfo.task		= NULL;
+	irqctx->tinfo.cpu		= cpu;
+	irqctx->tinfo.preempt_count	= HARDIRQ_OFFSET;
+	irqctx->tinfo.addr_limit	= MAKE_MM_SEG(0);
+
+	hardirq_ctx[cpu] = irqctx;
+
+	irqctx = (union irq_ctx *)&softirq_stack[cpu * THREAD_SIZE];
+	irqctx->tinfo.task		= NULL;
+	irqctx->tinfo.cpu		= cpu;
+	irqctx->tinfo.preempt_count	= 0;
+	irqctx->tinfo.addr_limit	= MAKE_MM_SEG(0);
+
+	softirq_ctx[cpu] = irqctx;
+
+	printk("CPU %u irqstacks, hard=%p soft=%p\n",
+		cpu, hardirq_ctx[cpu], softirq_ctx[cpu]);
+}
+
+void irq_ctx_exit(int cpu)
+{
+	hardirq_ctx[cpu] = NULL;
+}
+
+void do_softirq_own_stack(void)
+{
+	struct thread_info *curctx;
+	union irq_ctx *irqctx;
+	u32 *isp;
+
+	curctx = current_thread_info();
+	irqctx = softirq_ctx[smp_processor_id()];
+	irqctx->tinfo.task = curctx->task;
+	irqctx->tinfo.previous_sp = current_stack_pointer;
+
+	/* build the stack frame on the softirq stack */
+	isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
+
+	__asm__ __volatile__ (
+		"mov	r15, r9		\n"
+		"jsr	@%0		\n"
+		/* switch to the softirq stack */
+		" mov	%1, r15		\n"
+		/* restore the thread stack */
+		"mov	r9, r15		\n"
+		: /* no outputs */
+		: "r" (__do_softirq), "r" (isp)
+		: "memory", "r0", "r1", "r2", "r3", "r4",
+		  "r5", "r6", "r7", "r8", "r9", "r15", "t", "pr"
+	);
+}
+#else
+static inline void handle_one_irq(unsigned int irq)
+{
+	generic_handle_irq(irq);
+}
+#endif
+
+asmlinkage __irq_entry int do_IRQ(unsigned int irq, struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+
+	irq_enter();
+
+	irq = irq_demux(irq_lookup(irq));
+
+	if (irq != NO_IRQ_IGNORE) {
+		handle_one_irq(irq);
+		irq_finish(irq);
+	}
+
+	irq_exit();
+
+	set_irq_regs(old_regs);
+
+	return IRQ_HANDLED;
+}
+
+void __init init_IRQ(void)
+{
+	plat_irq_setup();
+
+	/* Perform the machine specific initialisation */
+	if (sh_mv.mv_init_irq)
+		sh_mv.mv_init_irq();
+
+	intc_finalize();
+
+	irq_ctx_init(smp_processor_id());
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * The CPU has been marked offline.  Migrate IRQs off this CPU.  If
+ * the affinity settings do not allow other CPUs, force them onto any
+ * available CPU.
+ */
+void migrate_irqs(void)
+{
+	unsigned int irq, cpu = smp_processor_id();
+
+	for_each_active_irq(irq) {
+		struct irq_data *data = irq_get_irq_data(irq);
+
+		if (irq_data_get_node(data) == cpu) {
+			struct cpumask *mask = irq_data_get_affinity_mask(data);
+			unsigned int newcpu = cpumask_any_and(mask,
+							      cpu_online_mask);
+			if (newcpu >= nr_cpu_ids) {
+				pr_info_ratelimited("IRQ%u no longer affine to CPU%u\n",
+						    irq, cpu);
+
+				cpumask_setall(mask);
+			}
+			irq_set_affinity(irq, mask);
+		}
+	}
+}
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/irq_32.c b/src/kernel/linux/v4.14/arch/sh/kernel/irq_32.c
new file mode 100644
index 0000000..e5a755b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/irq_32.c
@@ -0,0 +1,57 @@
+/*
+ * SHcompact irqflags support
+ *
+ * Copyright (C) 2006 - 2009 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/irqflags.h>
+#include <linux/module.h>
+
+void notrace arch_local_irq_restore(unsigned long flags)
+{
+	unsigned long __dummy0, __dummy1;
+
+	if (flags == ARCH_IRQ_DISABLED) {
+		__asm__ __volatile__ (
+			"stc	sr, %0\n\t"
+			"or	#0xf0, %0\n\t"
+			"ldc	%0, sr\n\t"
+			: "=&z" (__dummy0)
+			: /* no inputs */
+			: "memory"
+		);
+	} else {
+		__asm__ __volatile__ (
+			"stc	sr, %0\n\t"
+			"and	%1, %0\n\t"
+#ifdef CONFIG_CPU_HAS_SR_RB
+			"stc	r6_bank, %1\n\t"
+			"or	%1, %0\n\t"
+#endif
+			"ldc	%0, sr\n\t"
+			: "=&r" (__dummy0), "=r" (__dummy1)
+			: "1" (~ARCH_IRQ_DISABLED)
+			: "memory"
+		);
+	}
+}
+EXPORT_SYMBOL(arch_local_irq_restore);
+
+unsigned long notrace arch_local_save_flags(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"and	#0xf0, %0\n\t"
+		: "=&z" (flags)
+		: /* no inputs */
+		: "memory"
+	);
+
+	return flags;
+}
+EXPORT_SYMBOL(arch_local_save_flags);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/irq_64.c b/src/kernel/linux/v4.14/arch/sh/kernel/irq_64.c
new file mode 100644
index 0000000..8fc05b9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/irq_64.c
@@ -0,0 +1,51 @@
+/*
+ * SHmedia irqflags support
+ *
+ * Copyright (C) 2006 - 2009 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/irqflags.h>
+#include <linux/module.h>
+#include <cpu/registers.h>
+
+void notrace arch_local_irq_restore(unsigned long flags)
+{
+	unsigned long long __dummy;
+
+	if (flags == ARCH_IRQ_DISABLED) {
+		__asm__ __volatile__ (
+			"getcon	" __SR ", %0\n\t"
+			"or	%0, %1, %0\n\t"
+			"putcon	%0, " __SR "\n\t"
+			: "=&r" (__dummy)
+			: "r" (ARCH_IRQ_DISABLED)
+		);
+	} else {
+		__asm__ __volatile__ (
+			"getcon	" __SR ", %0\n\t"
+			"and	%0, %1, %0\n\t"
+			"putcon	%0, " __SR "\n\t"
+			: "=&r" (__dummy)
+			: "r" (~ARCH_IRQ_DISABLED)
+		);
+	}
+}
+EXPORT_SYMBOL(arch_local_irq_restore);
+
+unsigned long notrace arch_local_save_flags(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"getcon	" __SR ", %0\n\t"
+		"and	%0, %1, %0"
+		: "=&r" (flags)
+		: "r" (ARCH_IRQ_DISABLED)
+	);
+
+	return flags;
+}
+EXPORT_SYMBOL(arch_local_save_flags);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/kdebugfs.c b/src/kernel/linux/v4.14/arch/sh/kernel/kdebugfs.c
new file mode 100644
index 0000000..95428e0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/kdebugfs.c
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+
+struct dentry *arch_debugfs_dir;
+EXPORT_SYMBOL(arch_debugfs_dir);
+
+static int __init arch_kdebugfs_init(void)
+{
+	arch_debugfs_dir = debugfs_create_dir("sh", NULL);
+	if (!arch_debugfs_dir)
+		return -ENOMEM;
+
+	return 0;
+}
+arch_initcall(arch_kdebugfs_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/kgdb.c b/src/kernel/linux/v4.14/arch/sh/kernel/kgdb.c
new file mode 100644
index 0000000..4f04c66
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/kgdb.c
@@ -0,0 +1,392 @@
+/*
+ * SuperH KGDB support
+ *
+ * Copyright (C) 2008 - 2012  Paul Mundt
+ *
+ * Single stepping taken from the old stub by Henry Bell and Jeremy Siegel.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
+
+/* Macros for single step instruction identification */
+#define OPCODE_BT(op)		(((op) & 0xff00) == 0x8900)
+#define OPCODE_BF(op)		(((op) & 0xff00) == 0x8b00)
+#define OPCODE_BTF_DISP(op)	(((op) & 0x80) ? (((op) | 0xffffff80) << 1) : \
+				 (((op) & 0x7f ) << 1))
+#define OPCODE_BFS(op)		(((op) & 0xff00) == 0x8f00)
+#define OPCODE_BTS(op)		(((op) & 0xff00) == 0x8d00)
+#define OPCODE_BRA(op)		(((op) & 0xf000) == 0xa000)
+#define OPCODE_BRA_DISP(op)	(((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
+				 (((op) & 0x7ff) << 1))
+#define OPCODE_BRAF(op)		(((op) & 0xf0ff) == 0x0023)
+#define OPCODE_BRAF_REG(op)	(((op) & 0x0f00) >> 8)
+#define OPCODE_BSR(op)		(((op) & 0xf000) == 0xb000)
+#define OPCODE_BSR_DISP(op)	(((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
+				 (((op) & 0x7ff) << 1))
+#define OPCODE_BSRF(op)		(((op) & 0xf0ff) == 0x0003)
+#define OPCODE_BSRF_REG(op)	(((op) >> 8) & 0xf)
+#define OPCODE_JMP(op)		(((op) & 0xf0ff) == 0x402b)
+#define OPCODE_JMP_REG(op)	(((op) >> 8) & 0xf)
+#define OPCODE_JSR(op)		(((op) & 0xf0ff) == 0x400b)
+#define OPCODE_JSR_REG(op)	(((op) >> 8) & 0xf)
+#define OPCODE_RTS(op)		((op) == 0xb)
+#define OPCODE_RTE(op)		((op) == 0x2b)
+
+#define SR_T_BIT_MASK           0x1
+#define STEP_OPCODE             0xc33d
+
+/* Calculate the new address for after a step */
+static short *get_step_address(struct pt_regs *linux_regs)
+{
+	insn_size_t op = __raw_readw(linux_regs->pc);
+	long addr;
+
+	/* BT */
+	if (OPCODE_BT(op)) {
+		if (linux_regs->sr & SR_T_BIT_MASK)
+			addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
+		else
+			addr = linux_regs->pc + 2;
+	}
+
+	/* BTS */
+	else if (OPCODE_BTS(op)) {
+		if (linux_regs->sr & SR_T_BIT_MASK)
+			addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
+		else
+			addr = linux_regs->pc + 4;	/* Not in delay slot */
+	}
+
+	/* BF */
+	else if (OPCODE_BF(op)) {
+		if (!(linux_regs->sr & SR_T_BIT_MASK))
+			addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
+		else
+			addr = linux_regs->pc + 2;
+	}
+
+	/* BFS */
+	else if (OPCODE_BFS(op)) {
+		if (!(linux_regs->sr & SR_T_BIT_MASK))
+			addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
+		else
+			addr = linux_regs->pc + 4;	/* Not in delay slot */
+	}
+
+	/* BRA */
+	else if (OPCODE_BRA(op))
+		addr = linux_regs->pc + 4 + OPCODE_BRA_DISP(op);
+
+	/* BRAF */
+	else if (OPCODE_BRAF(op))
+		addr = linux_regs->pc + 4
+		    + linux_regs->regs[OPCODE_BRAF_REG(op)];
+
+	/* BSR */
+	else if (OPCODE_BSR(op))
+		addr = linux_regs->pc + 4 + OPCODE_BSR_DISP(op);
+
+	/* BSRF */
+	else if (OPCODE_BSRF(op))
+		addr = linux_regs->pc + 4
+		    + linux_regs->regs[OPCODE_BSRF_REG(op)];
+
+	/* JMP */
+	else if (OPCODE_JMP(op))
+		addr = linux_regs->regs[OPCODE_JMP_REG(op)];
+
+	/* JSR */
+	else if (OPCODE_JSR(op))
+		addr = linux_regs->regs[OPCODE_JSR_REG(op)];
+
+	/* RTS */
+	else if (OPCODE_RTS(op))
+		addr = linux_regs->pr;
+
+	/* RTE */
+	else if (OPCODE_RTE(op))
+		addr = linux_regs->regs[15];
+
+	/* Other */
+	else
+		addr = linux_regs->pc + instruction_size(op);
+
+	flush_icache_range(addr, addr + instruction_size(op));
+	return (short *)addr;
+}
+
+/*
+ * Replace the instruction immediately after the current instruction
+ * (i.e. next in the expected flow of control) with a trap instruction,
+ * so that returning will cause only a single instruction to be executed.
+ * Note that this model is slightly broken for instructions with delay
+ * slots (e.g. B[TF]S, BSR, BRA etc), where both the branch and the
+ * instruction in the delay slot will be executed.
+ */
+
+static unsigned long stepped_address;
+static insn_size_t stepped_opcode;
+
+static void do_single_step(struct pt_regs *linux_regs)
+{
+	/* Determine where the target instruction will send us to */
+	unsigned short *addr = get_step_address(linux_regs);
+
+	stepped_address = (int)addr;
+
+	/* Replace it */
+	stepped_opcode = __raw_readw((long)addr);
+	*addr = STEP_OPCODE;
+
+	/* Flush and return */
+	flush_icache_range((long)addr, (long)addr +
+			   instruction_size(stepped_opcode));
+}
+
+/* Undo a single step */
+static void undo_single_step(struct pt_regs *linux_regs)
+{
+	/* If we have stepped, put back the old instruction */
+	/* Use stepped_address in case we stopped elsewhere */
+	if (stepped_opcode != 0) {
+		__raw_writew(stepped_opcode, stepped_address);
+		flush_icache_range(stepped_address, stepped_address + 2);
+	}
+
+	stepped_opcode = 0;
+}
+
+struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = {
+	{ "r0",		GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[0]) },
+	{ "r1",		GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[1]) },
+	{ "r2",		GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[2]) },
+	{ "r3",		GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[3]) },
+	{ "r4",		GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[4]) },
+	{ "r5",		GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[5]) },
+	{ "r6",		GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[6]) },
+	{ "r7",		GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[7]) },
+	{ "r8",		GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[8]) },
+	{ "r9",		GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[9]) },
+	{ "r10",	GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[10]) },
+	{ "r11",	GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[11]) },
+	{ "r12",	GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[12]) },
+	{ "r13",	GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[13]) },
+	{ "r14",	GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[14]) },
+	{ "r15",	GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[15]) },
+	{ "pc",		GDB_SIZEOF_REG, offsetof(struct pt_regs, pc) },
+	{ "pr",		GDB_SIZEOF_REG, offsetof(struct pt_regs, pr) },
+	{ "sr",		GDB_SIZEOF_REG, offsetof(struct pt_regs, sr) },
+	{ "gbr",	GDB_SIZEOF_REG, offsetof(struct pt_regs, gbr) },
+	{ "mach",	GDB_SIZEOF_REG, offsetof(struct pt_regs, mach) },
+	{ "macl",	GDB_SIZEOF_REG, offsetof(struct pt_regs, macl) },
+	{ "vbr",	GDB_SIZEOF_REG, -1 },
+};
+
+int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	if (regno < 0 || regno >= DBG_MAX_REG_NUM)
+		return -EINVAL;
+
+	if (dbg_reg_def[regno].offset != -1)
+		memcpy((void *)regs + dbg_reg_def[regno].offset, mem,
+		       dbg_reg_def[regno].size);
+
+	return 0;
+}
+
+char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	if (regno >= DBG_MAX_REG_NUM || regno < 0)
+		return NULL;
+
+	if (dbg_reg_def[regno].size != -1)
+		memcpy(mem, (void *)regs + dbg_reg_def[regno].offset,
+		       dbg_reg_def[regno].size);
+
+	switch (regno) {
+	case GDB_VBR:
+		__asm__ __volatile__ ("stc vbr, %0" : "=r" (mem));
+		break;
+	}
+
+	return dbg_reg_def[regno].name;
+}
+
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	struct pt_regs *thread_regs = task_pt_regs(p);
+	int reg;
+
+	/* Initialize to zero */
+	for (reg = 0; reg < DBG_MAX_REG_NUM; reg++)
+		gdb_regs[reg] = 0;
+
+	/*
+	 * Copy out GP regs 8 to 14.
+	 *
+	 * switch_to() relies on SR.RB toggling, so regs 0->7 are banked
+	 * and need privileged instructions to get to. The r15 value we
+	 * fetch from the thread info directly.
+	 */
+	for (reg = GDB_R8; reg < GDB_R15; reg++)
+		gdb_regs[reg] = thread_regs->regs[reg];
+
+	gdb_regs[GDB_R15] = p->thread.sp;
+	gdb_regs[GDB_PC] = p->thread.pc;
+
+	/*
+	 * Additional registers we have context for
+	 */
+	gdb_regs[GDB_PR] = thread_regs->pr;
+	gdb_regs[GDB_GBR] = thread_regs->gbr;
+}
+
+int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
+			       char *remcomInBuffer, char *remcomOutBuffer,
+			       struct pt_regs *linux_regs)
+{
+	unsigned long addr;
+	char *ptr;
+
+	/* Undo any stepping we may have done */
+	undo_single_step(linux_regs);
+
+	switch (remcomInBuffer[0]) {
+	case 'c':
+	case 's':
+		/* try to read optional parameter, pc unchanged if no parm */
+		ptr = &remcomInBuffer[1];
+		if (kgdb_hex2long(&ptr, &addr))
+			linux_regs->pc = addr;
+	case 'D':
+	case 'k':
+		atomic_set(&kgdb_cpu_doing_single_step, -1);
+
+		if (remcomInBuffer[0] == 's') {
+			do_single_step(linux_regs);
+			kgdb_single_step = 1;
+
+			atomic_set(&kgdb_cpu_doing_single_step,
+				   raw_smp_processor_id());
+		}
+
+		return 0;
+	}
+
+	/* this means that we do not want to exit from the handler: */
+	return -1;
+}
+
+unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs)
+{
+	if (exception == 60)
+		return instruction_pointer(regs) - 2;
+	return instruction_pointer(regs);
+}
+
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+	regs->pc = ip;
+}
+
+/*
+ * The primary entry points for the kgdb debug trap table entries.
+ */
+BUILD_TRAP_HANDLER(singlestep)
+{
+	unsigned long flags;
+	TRAP_HANDLER_DECL;
+
+	local_irq_save(flags);
+	regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
+	kgdb_handle_exception(0, SIGTRAP, 0, regs);
+	local_irq_restore(flags);
+}
+
+static void kgdb_call_nmi_hook(void *ignored)
+{
+	kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	local_irq_enable();
+	smp_call_function(kgdb_call_nmi_hook, NULL, 0);
+	local_irq_disable();
+}
+
+static int __kgdb_notify(struct die_args *args, unsigned long cmd)
+{
+	int ret;
+
+	switch (cmd) {
+	case DIE_BREAKPOINT:
+		/*
+		 * This means a user thread is single stepping
+		 * a system call which should be ignored
+		 */
+		if (test_thread_flag(TIF_SINGLESTEP))
+			return NOTIFY_DONE;
+
+		ret = kgdb_handle_exception(args->trapnr & 0xff, args->signr,
+					    args->err, args->regs);
+		if (ret)
+			return NOTIFY_DONE;
+
+		break;
+	}
+
+	return NOTIFY_STOP;
+}
+
+static int
+kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+	ret = __kgdb_notify(ptr, cmd);
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static struct notifier_block kgdb_notifier = {
+	.notifier_call	= kgdb_notify,
+
+	/*
+	 * Lowest-prio notifier priority, we want to be notified last:
+	 */
+	.priority	= -INT_MAX,
+};
+
+int kgdb_arch_init(void)
+{
+	return register_die_notifier(&kgdb_notifier);
+}
+
+void kgdb_arch_exit(void)
+{
+	unregister_die_notifier(&kgdb_notifier);
+}
+
+struct kgdb_arch arch_kgdb_ops = {
+	/* Breakpoint instruction: trapa #0x3c */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	.gdb_bpt_instr		= { 0x3c, 0xc3 },
+#else
+	.gdb_bpt_instr		= { 0xc3, 0x3c },
+#endif
+};
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/kprobes.c b/src/kernel/linux/v4.14/arch/sh/kernel/kprobes.c
new file mode 100644
index 0000000..52a5e11
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/kprobes.c
@@ -0,0 +1,585 @@
+/*
+ * Kernel probes (kprobes) for SuperH
+ *
+ * Copyright (C) 2007 Chris Smith <chris.smith@st.com>
+ * Copyright (C) 2006 Lineo Solutions, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kprobes.h>
+#include <linux/extable.h>
+#include <linux/ptrace.h>
+#include <linux/preempt.h>
+#include <linux/kdebug.h>
+#include <linux/slab.h>
+#include <asm/cacheflush.h>
+#include <linux/uaccess.h>
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+static DEFINE_PER_CPU(struct kprobe, saved_current_opcode);
+static DEFINE_PER_CPU(struct kprobe, saved_next_opcode);
+static DEFINE_PER_CPU(struct kprobe, saved_next_opcode2);
+
+#define OPCODE_JMP(x)	(((x) & 0xF0FF) == 0x402b)
+#define OPCODE_JSR(x)	(((x) & 0xF0FF) == 0x400b)
+#define OPCODE_BRA(x)	(((x) & 0xF000) == 0xa000)
+#define OPCODE_BRAF(x)	(((x) & 0xF0FF) == 0x0023)
+#define OPCODE_BSR(x)	(((x) & 0xF000) == 0xb000)
+#define OPCODE_BSRF(x)	(((x) & 0xF0FF) == 0x0003)
+
+#define OPCODE_BF_S(x)	(((x) & 0xFF00) == 0x8f00)
+#define OPCODE_BT_S(x)	(((x) & 0xFF00) == 0x8d00)
+
+#define OPCODE_BF(x)	(((x) & 0xFF00) == 0x8b00)
+#define OPCODE_BT(x)	(((x) & 0xFF00) == 0x8900)
+
+#define OPCODE_RTS(x)	(((x) & 0x000F) == 0x000b)
+#define OPCODE_RTE(x)	(((x) & 0xFFFF) == 0x002b)
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+	kprobe_opcode_t opcode = *(kprobe_opcode_t *) (p->addr);
+
+	if (OPCODE_RTE(opcode))
+		return -EFAULT;	/* Bad breakpoint */
+
+	p->opcode = opcode;
+
+	return 0;
+}
+
+void __kprobes arch_copy_kprobe(struct kprobe *p)
+{
+	memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+	p->opcode = *p->addr;
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+	*p->addr = BREAKPOINT_INSTRUCTION;
+	flush_icache_range((unsigned long)p->addr,
+			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+}
+
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+	*p->addr = p->opcode;
+	flush_icache_range((unsigned long)p->addr,
+			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+}
+
+int __kprobes arch_trampoline_kprobe(struct kprobe *p)
+{
+	if (*p->addr == BREAKPOINT_INSTRUCTION)
+		return 1;
+
+	return 0;
+}
+
+/**
+ * If an illegal slot instruction exception occurs for an address
+ * containing a kprobe, remove the probe.
+ *
+ * Returns 0 if the exception was handled successfully, 1 otherwise.
+ */
+int __kprobes kprobe_handle_illslot(unsigned long pc)
+{
+	struct kprobe *p = get_kprobe((kprobe_opcode_t *) pc + 1);
+
+	if (p != NULL) {
+		printk("Warning: removing kprobe from delay slot: 0x%.8x\n",
+		       (unsigned int)pc + 2);
+		unregister_kprobe(p);
+		return 0;
+	}
+
+	return 1;
+}
+
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+	struct kprobe *saved = this_cpu_ptr(&saved_next_opcode);
+
+	if (saved->addr) {
+		arch_disarm_kprobe(p);
+		arch_disarm_kprobe(saved);
+
+		saved->addr = NULL;
+		saved->opcode = 0;
+
+		saved = this_cpu_ptr(&saved_next_opcode2);
+		if (saved->addr) {
+			arch_disarm_kprobe(saved);
+
+			saved->addr = NULL;
+			saved->opcode = 0;
+		}
+	}
+}
+
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	kcb->prev_kprobe.kp = kprobe_running();
+	kcb->prev_kprobe.status = kcb->kprobe_status;
+}
+
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	__this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
+	kcb->kprobe_status = kcb->prev_kprobe.status;
+}
+
+static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+					 struct kprobe_ctlblk *kcb)
+{
+	__this_cpu_write(current_kprobe, p);
+}
+
+/*
+ * Singlestep is implemented by disabling the current kprobe and setting one
+ * on the next instruction, following branches. Two probes are set if the
+ * branch is conditional.
+ */
+static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+{
+	__this_cpu_write(saved_current_opcode.addr, (kprobe_opcode_t *)regs->pc);
+
+	if (p != NULL) {
+		struct kprobe *op1, *op2;
+
+		arch_disarm_kprobe(p);
+
+		op1 = this_cpu_ptr(&saved_next_opcode);
+		op2 = this_cpu_ptr(&saved_next_opcode2);
+
+		if (OPCODE_JSR(p->opcode) || OPCODE_JMP(p->opcode)) {
+			unsigned int reg_nr = ((p->opcode >> 8) & 0x000F);
+			op1->addr = (kprobe_opcode_t *) regs->regs[reg_nr];
+		} else if (OPCODE_BRA(p->opcode) || OPCODE_BSR(p->opcode)) {
+			unsigned long disp = (p->opcode & 0x0FFF);
+			op1->addr =
+			    (kprobe_opcode_t *) (regs->pc + 4 + disp * 2);
+
+		} else if (OPCODE_BRAF(p->opcode) || OPCODE_BSRF(p->opcode)) {
+			unsigned int reg_nr = ((p->opcode >> 8) & 0x000F);
+			op1->addr =
+			    (kprobe_opcode_t *) (regs->pc + 4 +
+						 regs->regs[reg_nr]);
+
+		} else if (OPCODE_RTS(p->opcode)) {
+			op1->addr = (kprobe_opcode_t *) regs->pr;
+
+		} else if (OPCODE_BF(p->opcode) || OPCODE_BT(p->opcode)) {
+			unsigned long disp = (p->opcode & 0x00FF);
+			/* case 1 */
+			op1->addr = p->addr + 1;
+			/* case 2 */
+			op2->addr =
+			    (kprobe_opcode_t *) (regs->pc + 4 + disp * 2);
+			op2->opcode = *(op2->addr);
+			arch_arm_kprobe(op2);
+
+		} else if (OPCODE_BF_S(p->opcode) || OPCODE_BT_S(p->opcode)) {
+			unsigned long disp = (p->opcode & 0x00FF);
+			/* case 1 */
+			op1->addr = p->addr + 2;
+			/* case 2 */
+			op2->addr =
+			    (kprobe_opcode_t *) (regs->pc + 4 + disp * 2);
+			op2->opcode = *(op2->addr);
+			arch_arm_kprobe(op2);
+
+		} else {
+			op1->addr = p->addr + 1;
+		}
+
+		op1->opcode = *(op1->addr);
+		arch_arm_kprobe(op1);
+	}
+}
+
+/* Called with kretprobe_lock held */
+void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
+				      struct pt_regs *regs)
+{
+	ri->ret_addr = (kprobe_opcode_t *) regs->pr;
+
+	/* Replace the return addr with trampoline addr */
+	regs->pr = (unsigned long)kretprobe_trampoline;
+}
+
+static int __kprobes kprobe_handler(struct pt_regs *regs)
+{
+	struct kprobe *p;
+	int ret = 0;
+	kprobe_opcode_t *addr = NULL;
+	struct kprobe_ctlblk *kcb;
+
+	/*
+	 * We don't want to be preempted for the entire
+	 * duration of kprobe processing
+	 */
+	preempt_disable();
+	kcb = get_kprobe_ctlblk();
+
+	addr = (kprobe_opcode_t *) (regs->pc);
+
+	/* Check we're not actually recursing */
+	if (kprobe_running()) {
+		p = get_kprobe(addr);
+		if (p) {
+			if (kcb->kprobe_status == KPROBE_HIT_SS &&
+			    *p->ainsn.insn == BREAKPOINT_INSTRUCTION) {
+				goto no_kprobe;
+			}
+			/* We have reentered the kprobe_handler(), since
+			 * another probe was hit while within the handler.
+			 * We here save the original kprobes variables and
+			 * just single step on the instruction of the new probe
+			 * without calling any user handlers.
+			 */
+			save_previous_kprobe(kcb);
+			set_current_kprobe(p, regs, kcb);
+			kprobes_inc_nmissed_count(p);
+			prepare_singlestep(p, regs);
+			kcb->kprobe_status = KPROBE_REENTER;
+			return 1;
+		} else {
+			p = __this_cpu_read(current_kprobe);
+			if (p->break_handler && p->break_handler(p, regs)) {
+				goto ss_probe;
+			}
+		}
+		goto no_kprobe;
+	}
+
+	p = get_kprobe(addr);
+	if (!p) {
+		/* Not one of ours: let kernel handle it */
+		if (*(kprobe_opcode_t *)addr != BREAKPOINT_INSTRUCTION) {
+			/*
+			 * The breakpoint instruction was removed right
+			 * after we hit it. Another cpu has removed
+			 * either a probepoint or a debugger breakpoint
+			 * at this address. In either case, no further
+			 * handling of this interrupt is appropriate.
+			 */
+			ret = 1;
+		}
+
+		goto no_kprobe;
+	}
+
+	set_current_kprobe(p, regs, kcb);
+	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+	if (p->pre_handler && p->pre_handler(p, regs))
+		/* handler has already set things up, so skip ss setup */
+		return 1;
+
+ss_probe:
+	prepare_singlestep(p, regs);
+	kcb->kprobe_status = KPROBE_HIT_SS;
+	return 1;
+
+no_kprobe:
+	preempt_enable_no_resched();
+	return ret;
+}
+
+/*
+ * For function-return probes, init_kprobes() establishes a probepoint
+ * here. When a retprobed function returns, this probe is hit and
+ * trampoline_probe_handler() runs, calling the kretprobe's handler.
+ */
+static void __used kretprobe_trampoline_holder(void)
+{
+	asm volatile (".globl kretprobe_trampoline\n"
+		      "kretprobe_trampoline:\n\t"
+		      "nop\n");
+}
+
+/*
+ * Called when we hit the probe point at kretprobe_trampoline
+ */
+int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
+{
+	struct kretprobe_instance *ri = NULL;
+	struct hlist_head *head, empty_rp;
+	struct hlist_node *tmp;
+	unsigned long flags, orig_ret_address = 0;
+	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
+
+	INIT_HLIST_HEAD(&empty_rp);
+	kretprobe_hash_lock(current, &head, &flags);
+
+	/*
+	 * It is possible to have multiple instances associated with a given
+	 * task either because an multiple functions in the call path
+	 * have a return probe installed on them, and/or more then one return
+	 * return probe was registered for a target function.
+	 *
+	 * We can handle this because:
+	 *     - instances are always inserted at the head of the list
+	 *     - when multiple return probes are registered for the same
+	 *       function, the first instance's ret_addr will point to the
+	 *       real return address, and all the rest will point to
+	 *       kretprobe_trampoline
+	 */
+	hlist_for_each_entry_safe(ri, tmp, head, hlist) {
+		if (ri->task != current)
+			/* another task is sharing our hash bucket */
+			continue;
+
+		if (ri->rp && ri->rp->handler) {
+			__this_cpu_write(current_kprobe, &ri->rp->kp);
+			ri->rp->handler(ri, regs);
+			__this_cpu_write(current_kprobe, NULL);
+		}
+
+		orig_ret_address = (unsigned long)ri->ret_addr;
+		recycle_rp_inst(ri, &empty_rp);
+
+		if (orig_ret_address != trampoline_address)
+			/*
+			 * This is the real return address. Any other
+			 * instances associated with this task are for
+			 * other calls deeper on the call stack
+			 */
+			break;
+	}
+
+	kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
+	regs->pc = orig_ret_address;
+	kretprobe_hash_unlock(current, &flags);
+
+	preempt_enable_no_resched();
+
+	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
+		hlist_del(&ri->hlist);
+		kfree(ri);
+	}
+
+	return orig_ret_address;
+}
+
+static int __kprobes post_kprobe_handler(struct pt_regs *regs)
+{
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+	kprobe_opcode_t *addr = NULL;
+	struct kprobe *p = NULL;
+
+	if (!cur)
+		return 0;
+
+	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
+		kcb->kprobe_status = KPROBE_HIT_SSDONE;
+		cur->post_handler(cur, regs, 0);
+	}
+
+	p = this_cpu_ptr(&saved_next_opcode);
+	if (p->addr) {
+		arch_disarm_kprobe(p);
+		p->addr = NULL;
+		p->opcode = 0;
+
+		addr = __this_cpu_read(saved_current_opcode.addr);
+		__this_cpu_write(saved_current_opcode.addr, NULL);
+
+		p = get_kprobe(addr);
+		arch_arm_kprobe(p);
+
+		p = this_cpu_ptr(&saved_next_opcode2);
+		if (p->addr) {
+			arch_disarm_kprobe(p);
+			p->addr = NULL;
+			p->opcode = 0;
+		}
+	}
+
+	/* Restore back the original saved kprobes variables and continue. */
+	if (kcb->kprobe_status == KPROBE_REENTER) {
+		restore_previous_kprobe(kcb);
+		goto out;
+	}
+
+	reset_current_kprobe();
+
+out:
+	preempt_enable_no_resched();
+
+	return 1;
+}
+
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+	const struct exception_table_entry *entry;
+
+	switch (kcb->kprobe_status) {
+	case KPROBE_HIT_SS:
+	case KPROBE_REENTER:
+		/*
+		 * We are here because the instruction being single
+		 * stepped caused a page fault. We reset the current
+		 * kprobe, point the pc back to the probe address
+		 * and allow the page fault handler to continue as a
+		 * normal page fault.
+		 */
+		regs->pc = (unsigned long)cur->addr;
+		if (kcb->kprobe_status == KPROBE_REENTER)
+			restore_previous_kprobe(kcb);
+		else
+			reset_current_kprobe();
+		preempt_enable_no_resched();
+		break;
+	case KPROBE_HIT_ACTIVE:
+	case KPROBE_HIT_SSDONE:
+		/*
+		 * We increment the nmissed count for accounting,
+		 * we can also use npre/npostfault count for accounting
+		 * these specific fault cases.
+		 */
+		kprobes_inc_nmissed_count(cur);
+
+		/*
+		 * We come here because instructions in the pre/post
+		 * handler caused the page_fault, this could happen
+		 * if handler tries to access user space by
+		 * copy_from_user(), get_user() etc. Let the
+		 * user-specified handler try to fix it first.
+		 */
+		if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
+			return 1;
+
+		/*
+		 * In case the user-specified fault handler returned
+		 * zero, try to fix up.
+		 */
+		if ((entry = search_exception_tables(regs->pc)) != NULL) {
+			regs->pc = entry->fixup;
+			return 1;
+		}
+
+		/*
+		 * fixup_exception() could not handle it,
+		 * Let do_page_fault() fix it.
+		 */
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ * Wrapper routine to for handling exceptions.
+ */
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+				       unsigned long val, void *data)
+{
+	struct kprobe *p = NULL;
+	struct die_args *args = (struct die_args *)data;
+	int ret = NOTIFY_DONE;
+	kprobe_opcode_t *addr = NULL;
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	addr = (kprobe_opcode_t *) (args->regs->pc);
+	if (val == DIE_TRAP) {
+		if (!kprobe_running()) {
+			if (kprobe_handler(args->regs)) {
+				ret = NOTIFY_STOP;
+			} else {
+				/* Not a kprobe trap */
+				ret = NOTIFY_DONE;
+			}
+		} else {
+			p = get_kprobe(addr);
+			if ((kcb->kprobe_status == KPROBE_HIT_SS) ||
+			    (kcb->kprobe_status == KPROBE_REENTER)) {
+				if (post_kprobe_handler(args->regs))
+					ret = NOTIFY_STOP;
+			} else {
+				if (kprobe_handler(args->regs)) {
+					ret = NOTIFY_STOP;
+				} else {
+					p = __this_cpu_read(current_kprobe);
+					if (p->break_handler &&
+					    p->break_handler(p, args->regs))
+						ret = NOTIFY_STOP;
+				}
+			}
+		}
+	}
+
+	return ret;
+}
+
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+	struct jprobe *jp = container_of(p, struct jprobe, kp);
+	unsigned long addr;
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	kcb->jprobe_saved_regs = *regs;
+	kcb->jprobe_saved_r15 = regs->regs[15];
+	addr = kcb->jprobe_saved_r15;
+
+	/*
+	 * TBD: As Linus pointed out, gcc assumes that the callee
+	 * owns the argument space and could overwrite it, e.g.
+	 * tailcall optimization. So, to be absolutely safe
+	 * we also save and restore enough stack bytes to cover
+	 * the argument area.
+	 */
+	memcpy(kcb->jprobes_stack, (kprobe_opcode_t *) addr,
+	       MIN_STACK_SIZE(addr));
+
+	regs->pc = (unsigned long)(jp->entry);
+
+	return 1;
+}
+
+void __kprobes jprobe_return(void)
+{
+	asm volatile ("trapa #0x3a\n\t" "jprobe_return_end:\n\t" "nop\n\t");
+}
+
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+	unsigned long stack_addr = kcb->jprobe_saved_r15;
+	u8 *addr = (u8 *)regs->pc;
+
+	if ((addr >= (u8 *)jprobe_return) &&
+	    (addr <= (u8 *)jprobe_return_end)) {
+		*regs = kcb->jprobe_saved_regs;
+
+		memcpy((kprobe_opcode_t *)stack_addr, kcb->jprobes_stack,
+		       MIN_STACK_SIZE(stack_addr));
+
+		kcb->kprobe_status = KPROBE_HIT_SS;
+		preempt_enable_no_resched();
+		return 1;
+	}
+
+	return 0;
+}
+
+static struct kprobe trampoline_p = {
+	.addr = (kprobe_opcode_t *)&kretprobe_trampoline,
+	.pre_handler = trampoline_probe_handler
+};
+
+int __init arch_init_kprobes(void)
+{
+	return register_kprobe(&trampoline_p);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/machine_kexec.c b/src/kernel/linux/v4.14/arch/sh/kernel/machine_kexec.c
new file mode 100644
index 0000000..9fea49f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/machine_kexec.c
@@ -0,0 +1,207 @@
+/*
+ * machine_kexec.c - handle transition of Linux booting another kernel
+ * Copyright (C) 2002-2003 Eric Biederman  <ebiederm@xmission.com>
+ *
+ * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
+ * LANDISK/sh4 supported by kogiidena
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2.  See the file COPYING for more details.
+ */
+#include <linux/mm.h>
+#include <linux/kexec.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/numa.h>
+#include <linux/ftrace.h>
+#include <linux/suspend.h>
+#include <linux/memblock.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/cacheflush.h>
+#include <asm/sh_bios.h>
+#include <asm/reboot.h>
+
+typedef void (*relocate_new_kernel_t)(unsigned long indirection_page,
+				      unsigned long reboot_code_buffer,
+				      unsigned long start_address);
+
+extern const unsigned char relocate_new_kernel[];
+extern const unsigned int relocate_new_kernel_size;
+extern void *vbr_base;
+
+void native_machine_crash_shutdown(struct pt_regs *regs)
+{
+	/* Nothing to do for UP, but definitely broken for SMP.. */
+}
+
+/*
+ * Do what every setup is needed on image and the
+ * reboot code buffer to allow us to avoid allocations
+ * later.
+ */
+int machine_kexec_prepare(struct kimage *image)
+{
+	return 0;
+}
+
+void machine_kexec_cleanup(struct kimage *image)
+{
+}
+
+static void kexec_info(struct kimage *image)
+{
+        int i;
+	printk("kexec information\n");
+	for (i = 0; i < image->nr_segments; i++) {
+	        printk("  segment[%d]: 0x%08x - 0x%08x (0x%08x)\n",
+		       i,
+		       (unsigned int)image->segment[i].mem,
+		       (unsigned int)image->segment[i].mem +
+				     image->segment[i].memsz,
+		       (unsigned int)image->segment[i].memsz);
+	}
+	printk("  start     : 0x%08x\n\n", (unsigned int)image->start);
+}
+
+/*
+ * Do not allocate memory (or fail in any way) in machine_kexec().
+ * We are past the point of no return, committed to rebooting now.
+ */
+void machine_kexec(struct kimage *image)
+{
+	unsigned long page_list;
+	unsigned long reboot_code_buffer;
+	relocate_new_kernel_t rnk;
+	unsigned long entry;
+	unsigned long *ptr;
+	int save_ftrace_enabled;
+
+	/*
+	 * Nicked from the mips version of machine_kexec():
+	 * The generic kexec code builds a page list with physical
+	 * addresses. Use phys_to_virt() to convert them to virtual.
+	 */
+	for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE);
+	     ptr = (entry & IND_INDIRECTION) ?
+	       phys_to_virt(entry & PAGE_MASK) : ptr + 1) {
+		if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION ||
+		    *ptr & IND_DESTINATION)
+			*ptr = (unsigned long) phys_to_virt(*ptr);
+	}
+
+#ifdef CONFIG_KEXEC_JUMP
+	if (image->preserve_context)
+		save_processor_state();
+#endif
+
+	save_ftrace_enabled = __ftrace_enabled_save();
+
+	/* Interrupts aren't acceptable while we reboot */
+	local_irq_disable();
+
+	page_list = image->head;
+
+	/* we need both effective and real address here */
+	reboot_code_buffer =
+			(unsigned long)page_address(image->control_code_page);
+
+	/* copy our kernel relocation code to the control code page */
+	memcpy((void *)reboot_code_buffer, relocate_new_kernel,
+						relocate_new_kernel_size);
+
+	kexec_info(image);
+	flush_cache_all();
+
+	sh_bios_vbr_reload();
+
+	/* now call it */
+	rnk = (relocate_new_kernel_t) reboot_code_buffer;
+	(*rnk)(page_list, reboot_code_buffer,
+	       (unsigned long)phys_to_virt(image->start));
+
+#ifdef CONFIG_KEXEC_JUMP
+	asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory");
+
+	if (image->preserve_context)
+		restore_processor_state();
+
+	/* Convert page list back to physical addresses, what a mess. */
+	for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE);
+	     ptr = (*ptr & IND_INDIRECTION) ?
+	       phys_to_virt(*ptr & PAGE_MASK) : ptr + 1) {
+		if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION ||
+		    *ptr & IND_DESTINATION)
+			*ptr = virt_to_phys(*ptr);
+	}
+#endif
+
+	__ftrace_enabled_restore(save_ftrace_enabled);
+}
+
+void arch_crash_save_vmcoreinfo(void)
+{
+#ifdef CONFIG_NUMA
+	VMCOREINFO_SYMBOL(node_data);
+	VMCOREINFO_LENGTH(node_data, MAX_NUMNODES);
+#endif
+#ifdef CONFIG_X2TLB
+	VMCOREINFO_CONFIG(X2TLB);
+#endif
+}
+
+void __init reserve_crashkernel(void)
+{
+	unsigned long long crash_size, crash_base;
+	int ret;
+
+	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
+			&crash_size, &crash_base);
+	if (ret == 0 && crash_size > 0) {
+		crashk_res.start = crash_base;
+		crashk_res.end = crash_base + crash_size - 1;
+	}
+
+	if (crashk_res.end == crashk_res.start)
+		goto disable;
+
+	crash_size = PAGE_ALIGN(resource_size(&crashk_res));
+	if (!crashk_res.start) {
+		unsigned long max = memblock_end_of_DRAM() - memory_limit;
+		crashk_res.start = __memblock_alloc_base(crash_size, PAGE_SIZE, max);
+		if (!crashk_res.start) {
+			pr_err("crashkernel allocation failed\n");
+			goto disable;
+		}
+	} else {
+		ret = memblock_reserve(crashk_res.start, crash_size);
+		if (unlikely(ret < 0)) {
+			pr_err("crashkernel reservation failed - "
+			       "memory is in use\n");
+			goto disable;
+		}
+	}
+
+	crashk_res.end = crashk_res.start + crash_size - 1;
+
+	/*
+	 * Crash kernel trumps memory limit
+	 */
+	if ((memblock_end_of_DRAM() - memory_limit) <= crashk_res.end) {
+		memory_limit = 0;
+		pr_info("Disabled memory limit for crashkernel\n");
+	}
+
+	pr_info("Reserving %ldMB of memory at 0x%08lx "
+		"for crashkernel (System RAM: %ldMB)\n",
+		(unsigned long)(crash_size >> 20),
+		(unsigned long)(crashk_res.start),
+		(unsigned long)(memblock_phys_mem_size() >> 20));
+
+	return;
+
+disable:
+	crashk_res.start = crashk_res.end = 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/machvec.c b/src/kernel/linux/v4.14/arch/sh/kernel/machvec.c
new file mode 100644
index 0000000..ec05f49
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/machvec.c
@@ -0,0 +1,124 @@
+/*
+ * arch/sh/kernel/machvec.c
+ *
+ * The SuperH machine vector setup handlers, yanked from setup.c
+ *
+ *  Copyright (C) 1999  Niibe Yutaka
+ *  Copyright (C) 2002 - 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/machvec.h>
+#include <asm/sections.h>
+#include <asm/addrspace.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#define MV_NAME_SIZE 32
+
+#define for_each_mv(mv) \
+	for ((mv) = (struct sh_machine_vector *)&__machvec_start; \
+	     (mv) && (unsigned long)(mv) < (unsigned long)&__machvec_end; \
+	     (mv)++)
+
+static struct sh_machine_vector * __init get_mv_byname(const char *name)
+{
+	struct sh_machine_vector *mv;
+
+	for_each_mv(mv)
+		if (strcasecmp(name, mv->mv_name) == 0)
+			return mv;
+
+	return NULL;
+}
+
+static unsigned int __initdata machvec_selected;
+
+static int __init early_parse_mv(char *from)
+{
+	char mv_name[MV_NAME_SIZE] = "";
+	char *mv_end;
+	char *mv_comma;
+	int mv_len;
+	struct sh_machine_vector *mvp;
+
+	mv_end = strchr(from, ' ');
+	if (mv_end == NULL)
+		mv_end = from + strlen(from);
+
+	mv_comma = strchr(from, ',');
+	mv_len = mv_end - from;
+	if (mv_len > (MV_NAME_SIZE-1))
+		mv_len = MV_NAME_SIZE-1;
+	memcpy(mv_name, from, mv_len);
+	mv_name[mv_len] = '\0';
+	from = mv_end;
+
+	machvec_selected = 1;
+
+	/* Boot with the generic vector */
+	if (strcmp(mv_name, "generic") == 0)
+		return 0;
+
+	mvp = get_mv_byname(mv_name);
+	if (unlikely(!mvp)) {
+		printk("Available vectors:\n\n\t'%s', ", sh_mv.mv_name);
+		for_each_mv(mvp)
+			printk("'%s', ", mvp->mv_name);
+		printk("\n\n");
+		panic("Failed to select machvec '%s' -- halting.\n",
+		      mv_name);
+	} else
+		sh_mv = *mvp;
+
+	return 0;
+}
+early_param("sh_mv", early_parse_mv);
+
+void __init sh_mv_setup(void)
+{
+	/*
+	 * Only overload the machvec if one hasn't been selected on
+	 * the command line with sh_mv=
+	 */
+	if (!machvec_selected) {
+		unsigned long machvec_size;
+
+		machvec_size = ((unsigned long)&__machvec_end -
+				(unsigned long)&__machvec_start);
+
+		/*
+		 * Sanity check for machvec section alignment. Ensure
+		 * __initmv hasn't been misused.
+		 */
+		if (machvec_size % sizeof(struct sh_machine_vector))
+			panic("machvec misaligned, invalid __initmv use?");
+
+		/*
+		 * If the machvec hasn't been preselected, use the first
+		 * vector (usually the only one) from .machvec.init.
+		 */
+		if (machvec_size >= sizeof(struct sh_machine_vector))
+			sh_mv = *(struct sh_machine_vector *)&__machvec_start;
+	}
+
+	printk(KERN_NOTICE "Booting machvec: %s\n", get_system_type());
+
+	/*
+	 * Manually walk the vec, fill in anything that the board hasn't yet
+	 * by hand, wrapping to the generic implementation.
+	 */
+#define mv_set(elem) do { \
+	if (!sh_mv.mv_##elem) \
+		sh_mv.mv_##elem = generic_##elem; \
+} while (0)
+
+	mv_set(irq_demux);
+	mv_set(mode_pins);
+	mv_set(mem_init);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/module.c b/src/kernel/linux/v4.14/arch/sh/kernel/module.c
new file mode 100644
index 0000000..1b525de
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/module.c
@@ -0,0 +1,126 @@
+/*  Kernel module help for SH.
+
+    SHcompact version by Kaz Kojima and Paul Mundt.
+
+    SHmedia bits:
+
+	Copyright 2004 SuperH (UK) Ltd
+	Author: Richard Curnow
+
+	Based on the sh version, and on code from the sh64-specific parts of
+	modutils, originally written by Richard Curnow and Ben Gaster.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/bug.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <asm/unaligned.h>
+#include <asm/dwarf.h>
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+		   const char *strtab,
+		   unsigned int symindex,
+		   unsigned int relsec,
+		   struct module *me)
+{
+	unsigned int i;
+	Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+	Elf32_Sym *sym;
+	Elf32_Addr relocation;
+	uint32_t *location;
+	uint32_t value;
+
+	pr_debug("Applying relocate section %u to %u\n", relsec,
+		 sechdrs[relsec].sh_info);
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+		/* This is the symbol it is referring to.  Note that all
+		   undefined symbols have been resolved.  */
+		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+			+ ELF32_R_SYM(rel[i].r_info);
+		relocation = sym->st_value + rel[i].r_addend;
+
+#ifdef CONFIG_SUPERH64
+		/* For text addresses, bit2 of the st_other field indicates
+		 * whether the symbol is SHmedia (1) or SHcompact (0).  If
+		 * SHmedia, the LSB of the symbol needs to be asserted
+		 * for the CPU to be in SHmedia mode when it starts executing
+		 * the branch target. */
+		relocation |= !!(sym->st_other & 4);
+#endif
+
+		switch (ELF32_R_TYPE(rel[i].r_info)) {
+		case R_SH_NONE:
+			break;
+		case R_SH_DIR32:
+			value = get_unaligned(location);
+			value += relocation;
+			put_unaligned(value, location);
+			break;
+		case R_SH_REL32:
+			relocation = (relocation - (Elf32_Addr) location);
+			value = get_unaligned(location);
+			value += relocation;
+			put_unaligned(value, location);
+			break;
+		case R_SH_IMM_LOW16:
+			*location = (*location & ~0x3fffc00) |
+				((relocation & 0xffff) << 10);
+			break;
+		case R_SH_IMM_MEDLOW16:
+			*location = (*location & ~0x3fffc00) |
+				(((relocation >> 16) & 0xffff) << 10);
+			break;
+		case R_SH_IMM_LOW16_PCREL:
+			relocation -= (Elf32_Addr) location;
+			*location = (*location & ~0x3fffc00) |
+				((relocation & 0xffff) << 10);
+			break;
+		case R_SH_IMM_MEDLOW16_PCREL:
+			relocation -= (Elf32_Addr) location;
+			*location = (*location & ~0x3fffc00) |
+				(((relocation >> 16) & 0xffff) << 10);
+			break;
+		default:
+			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+			       me->name, ELF32_R_TYPE(rel[i].r_info));
+			return -ENOEXEC;
+		}
+	}
+	return 0;
+}
+
+int module_finalize(const Elf_Ehdr *hdr,
+		    const Elf_Shdr *sechdrs,
+		    struct module *me)
+{
+	int ret = 0;
+
+	ret |= module_dwarf_finalize(hdr, sechdrs, me);
+
+	return ret;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+	module_dwarf_cleanup(mod);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/nmi_debug.c b/src/kernel/linux/v4.14/arch/sh/kernel/nmi_debug.c
new file mode 100644
index 0000000..730d928
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/nmi_debug.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/delay.h>
+#include <linux/kdebug.h>
+#include <linux/notifier.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/hardirq.h>
+
+enum nmi_action {
+	NMI_SHOW_STATE	= 1 << 0,
+	NMI_SHOW_REGS	= 1 << 1,
+	NMI_DIE		= 1 << 2,
+	NMI_DEBOUNCE	= 1 << 3,
+};
+
+static unsigned long nmi_actions;
+
+static int nmi_debug_notify(struct notifier_block *self,
+		unsigned long val, void *data)
+{
+	struct die_args *args = data;
+
+	if (likely(val != DIE_NMI))
+		return NOTIFY_DONE;
+
+	if (nmi_actions & NMI_SHOW_STATE)
+		show_state();
+	if (nmi_actions & NMI_SHOW_REGS)
+		show_regs(args->regs);
+	if (nmi_actions & NMI_DEBOUNCE)
+		mdelay(10);
+	if (nmi_actions & NMI_DIE)
+		return NOTIFY_BAD;
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block nmi_debug_nb = {
+	.notifier_call = nmi_debug_notify,
+};
+
+static int __init nmi_debug_setup(char *str)
+{
+	char *p, *sep;
+
+	register_die_notifier(&nmi_debug_nb);
+
+	if (*str != '=')
+		return 0;
+
+	for (p = str + 1; *p; p = sep + 1) {
+		sep = strchr(p, ',');
+		if (sep)
+			*sep = 0;
+		if (strcmp(p, "state") == 0)
+			nmi_actions |= NMI_SHOW_STATE;
+		else if (strcmp(p, "regs") == 0)
+			nmi_actions |= NMI_SHOW_REGS;
+		else if (strcmp(p, "debounce") == 0)
+			nmi_actions |= NMI_DEBOUNCE;
+		else if (strcmp(p, "die") == 0)
+			nmi_actions |= NMI_DIE;
+		else
+			printk(KERN_WARNING "NMI: Unrecognized action `%s'\n",
+				p);
+		if (!sep)
+			break;
+	}
+
+	return 0;
+}
+__setup("nmi_debug", nmi_debug_setup);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/perf_callchain.c b/src/kernel/linux/v4.14/arch/sh/kernel/perf_callchain.c
new file mode 100644
index 0000000..fa2c0cd
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/perf_callchain.c
@@ -0,0 +1,41 @@
+/*
+ * Performance event callchain support - SuperH architecture code
+ *
+ * Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/perf_event.h>
+#include <linux/percpu.h>
+#include <asm/unwinder.h>
+#include <asm/ptrace.h>
+
+static int callchain_stack(void *data, char *name)
+{
+	return 0;
+}
+
+static void callchain_address(void *data, unsigned long addr, int reliable)
+{
+	struct perf_callchain_entry_ctx *entry = data;
+
+	if (reliable)
+		perf_callchain_store(entry, addr);
+}
+
+static const struct stacktrace_ops callchain_ops = {
+	.stack		= callchain_stack,
+	.address	= callchain_address,
+};
+
+void
+perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
+{
+	perf_callchain_store(entry, regs->pc);
+
+	unwind_stack(NULL, regs, NULL, &callchain_ops, entry);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/perf_event.c b/src/kernel/linux/v4.14/arch/sh/kernel/perf_event.c
new file mode 100644
index 0000000..ba3269a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/perf_event.c
@@ -0,0 +1,384 @@
+/*
+ * Performance event support framework for SuperH hardware counters.
+ *
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ * Heavily based on the x86 and PowerPC implementations.
+ *
+ * x86:
+ *  Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
+ *  Copyright (C) 2009 Jaswinder Singh Rajput
+ *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra
+ *  Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
+ *
+ * ppc:
+ *  Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/perf_event.h>
+#include <linux/export.h>
+#include <asm/processor.h>
+
+struct cpu_hw_events {
+	struct perf_event	*events[MAX_HWEVENTS];
+	unsigned long		used_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
+	unsigned long		active_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
+};
+
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+
+static struct sh_pmu *sh_pmu __read_mostly;
+
+/* Number of perf_events counting hardware events */
+static atomic_t num_events;
+/* Used to avoid races in calling reserve/release_pmc_hardware */
+static DEFINE_MUTEX(pmc_reserve_mutex);
+
+/*
+ * Stub these out for now, do something more profound later.
+ */
+int reserve_pmc_hardware(void)
+{
+	return 0;
+}
+
+void release_pmc_hardware(void)
+{
+}
+
+static inline int sh_pmu_initialized(void)
+{
+	return !!sh_pmu;
+}
+
+const char *perf_pmu_name(void)
+{
+	if (!sh_pmu)
+		return NULL;
+
+	return sh_pmu->name;
+}
+EXPORT_SYMBOL_GPL(perf_pmu_name);
+
+int perf_num_counters(void)
+{
+	if (!sh_pmu)
+		return 0;
+
+	return sh_pmu->num_events;
+}
+EXPORT_SYMBOL_GPL(perf_num_counters);
+
+/*
+ * Release the PMU if this is the last perf_event.
+ */
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+	if (!atomic_add_unless(&num_events, -1, 1)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_dec_return(&num_events) == 0)
+			release_pmc_hardware();
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+}
+
+static int hw_perf_cache_event(int config, int *evp)
+{
+	unsigned long type, op, result;
+	int ev;
+
+	if (!sh_pmu->cache_events)
+		return -EINVAL;
+
+	/* unpack config */
+	type = config & 0xff;
+	op = (config >> 8) & 0xff;
+	result = (config >> 16) & 0xff;
+
+	if (type >= PERF_COUNT_HW_CACHE_MAX ||
+	    op >= PERF_COUNT_HW_CACHE_OP_MAX ||
+	    result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return -EINVAL;
+
+	ev = (*sh_pmu->cache_events)[type][op][result];
+	if (ev == 0)
+		return -EOPNOTSUPP;
+	if (ev == -1)
+		return -EINVAL;
+	*evp = ev;
+	return 0;
+}
+
+static int __hw_perf_event_init(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+	struct hw_perf_event *hwc = &event->hw;
+	int config = -1;
+	int err;
+
+	if (!sh_pmu_initialized())
+		return -ENODEV;
+
+	/*
+	 * See if we need to reserve the counter.
+	 *
+	 * If no events are currently in use, then we have to take a
+	 * mutex to ensure that we don't race with another task doing
+	 * reserve_pmc_hardware or release_pmc_hardware.
+	 */
+	err = 0;
+	if (!atomic_inc_not_zero(&num_events)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_read(&num_events) == 0 &&
+		    reserve_pmc_hardware())
+			err = -EBUSY;
+		else
+			atomic_inc(&num_events);
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+
+	if (err)
+		return err;
+
+	event->destroy = hw_perf_event_destroy;
+
+	switch (attr->type) {
+	case PERF_TYPE_RAW:
+		config = attr->config & sh_pmu->raw_event_mask;
+		break;
+	case PERF_TYPE_HW_CACHE:
+		err = hw_perf_cache_event(attr->config, &config);
+		if (err)
+			return err;
+		break;
+	case PERF_TYPE_HARDWARE:
+		if (attr->config >= sh_pmu->max_events)
+			return -EINVAL;
+
+		config = sh_pmu->event_map(attr->config);
+		break;
+	}
+
+	if (config == -1)
+		return -EINVAL;
+
+	hwc->config |= config;
+
+	return 0;
+}
+
+static void sh_perf_event_update(struct perf_event *event,
+				   struct hw_perf_event *hwc, int idx)
+{
+	u64 prev_raw_count, new_raw_count;
+	s64 delta;
+	int shift = 0;
+
+	/*
+	 * Depending on the counter configuration, they may or may not
+	 * be chained, in which case the previous counter value can be
+	 * updated underneath us if the lower-half overflows.
+	 *
+	 * Our tactic to handle this is to first atomically read and
+	 * exchange a new raw count - then add that new-prev delta
+	 * count to the generic counter atomically.
+	 *
+	 * As there is no interrupt associated with the overflow events,
+	 * this is the simplest approach for maintaining consistency.
+	 */
+again:
+	prev_raw_count = local64_read(&hwc->prev_count);
+	new_raw_count = sh_pmu->read(idx);
+
+	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+			     new_raw_count) != prev_raw_count)
+		goto again;
+
+	/*
+	 * Now we have the new raw value and have updated the prev
+	 * timestamp already. We can now calculate the elapsed delta
+	 * (counter-)time and add that to the generic counter.
+	 *
+	 * Careful, not all hw sign-extends above the physical width
+	 * of the count.
+	 */
+	delta = (new_raw_count << shift) - (prev_raw_count << shift);
+	delta >>= shift;
+
+	local64_add(delta, &event->count);
+}
+
+static void sh_pmu_stop(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	if (!(event->hw.state & PERF_HES_STOPPED)) {
+		sh_pmu->disable(hwc, idx);
+		cpuc->events[idx] = NULL;
+		event->hw.state |= PERF_HES_STOPPED;
+	}
+
+	if ((flags & PERF_EF_UPDATE) && !(event->hw.state & PERF_HES_UPTODATE)) {
+		sh_perf_event_update(event, &event->hw, idx);
+		event->hw.state |= PERF_HES_UPTODATE;
+	}
+}
+
+static void sh_pmu_start(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	if (WARN_ON_ONCE(idx == -1))
+		return;
+
+	if (flags & PERF_EF_RELOAD)
+		WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
+
+	cpuc->events[idx] = event;
+	event->hw.state = 0;
+	sh_pmu->enable(hwc, idx);
+}
+
+static void sh_pmu_del(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	sh_pmu_stop(event, PERF_EF_UPDATE);
+	__clear_bit(event->hw.idx, cpuc->used_mask);
+
+	perf_event_update_userpage(event);
+}
+
+static int sh_pmu_add(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+	int ret = -EAGAIN;
+
+	perf_pmu_disable(event->pmu);
+
+	if (__test_and_set_bit(idx, cpuc->used_mask)) {
+		idx = find_first_zero_bit(cpuc->used_mask, sh_pmu->num_events);
+		if (idx == sh_pmu->num_events)
+			goto out;
+
+		__set_bit(idx, cpuc->used_mask);
+		hwc->idx = idx;
+	}
+
+	sh_pmu->disable(hwc, idx);
+
+	event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
+	if (flags & PERF_EF_START)
+		sh_pmu_start(event, PERF_EF_RELOAD);
+
+	perf_event_update_userpage(event);
+	ret = 0;
+out:
+	perf_pmu_enable(event->pmu);
+	return ret;
+}
+
+static void sh_pmu_read(struct perf_event *event)
+{
+	sh_perf_event_update(event, &event->hw, event->hw.idx);
+}
+
+static int sh_pmu_event_init(struct perf_event *event)
+{
+	int err;
+
+	/* does not support taken branch sampling */
+	if (has_branch_stack(event))
+		return -EOPNOTSUPP;
+
+	switch (event->attr.type) {
+	case PERF_TYPE_RAW:
+	case PERF_TYPE_HW_CACHE:
+	case PERF_TYPE_HARDWARE:
+		err = __hw_perf_event_init(event);
+		break;
+
+	default:
+		return -ENOENT;
+	}
+
+	if (unlikely(err)) {
+		if (event->destroy)
+			event->destroy(event);
+	}
+
+	return err;
+}
+
+static void sh_pmu_enable(struct pmu *pmu)
+{
+	if (!sh_pmu_initialized())
+		return;
+
+	sh_pmu->enable_all();
+}
+
+static void sh_pmu_disable(struct pmu *pmu)
+{
+	if (!sh_pmu_initialized())
+		return;
+
+	sh_pmu->disable_all();
+}
+
+static struct pmu pmu = {
+	.pmu_enable	= sh_pmu_enable,
+	.pmu_disable	= sh_pmu_disable,
+	.event_init	= sh_pmu_event_init,
+	.add		= sh_pmu_add,
+	.del		= sh_pmu_del,
+	.start		= sh_pmu_start,
+	.stop		= sh_pmu_stop,
+	.read		= sh_pmu_read,
+};
+
+static int sh_pmu_prepare_cpu(unsigned int cpu)
+{
+	struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
+
+	memset(cpuhw, 0, sizeof(struct cpu_hw_events));
+	return 0;
+}
+
+int register_sh_pmu(struct sh_pmu *_pmu)
+{
+	if (sh_pmu)
+		return -EBUSY;
+	sh_pmu = _pmu;
+
+	pr_info("Performance Events: %s support registered\n", _pmu->name);
+
+	/*
+	 * All of the on-chip counters are "limited", in that they have
+	 * no interrupts, and are therefore unable to do sampling without
+	 * further work and timer assistance.
+	 */
+	pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
+
+	WARN_ON(_pmu->num_events > MAX_HWEVENTS);
+
+	perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
+	cpuhp_setup_state(CPUHP_PERF_SUPERH, "PERF_SUPERH", sh_pmu_prepare_cpu,
+			  NULL);
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/process.c b/src/kernel/linux/v4.14/arch/sh/kernel/process.c
new file mode 100644
index 0000000..68b1a67
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/process.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sched/signal.h>
+#include <linux/sched/task_stack.h>
+#include <linux/export.h>
+#include <linux/stackprotector.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+
+struct kmem_cache *task_xstate_cachep = NULL;
+unsigned int xstate_size;
+
+#ifdef CONFIG_CC_STACKPROTECTOR
+unsigned long __stack_chk_guard __read_mostly;
+EXPORT_SYMBOL(__stack_chk_guard);
+#endif
+
+/*
+ * this gets called so that we can store lazy state into memory and copy the
+ * current task into the new thread.
+ */
+int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
+{
+#ifdef CONFIG_SUPERH32
+	unlazy_fpu(src, task_pt_regs(src));
+#endif
+	*dst = *src;
+
+	if (src->thread.xstate) {
+		dst->thread.xstate = kmem_cache_alloc(task_xstate_cachep,
+						      GFP_KERNEL);
+		if (!dst->thread.xstate)
+			return -ENOMEM;
+		memcpy(dst->thread.xstate, src->thread.xstate, xstate_size);
+	}
+
+	return 0;
+}
+
+void free_thread_xstate(struct task_struct *tsk)
+{
+	if (tsk->thread.xstate) {
+		kmem_cache_free(task_xstate_cachep, tsk->thread.xstate);
+		tsk->thread.xstate = NULL;
+	}
+}
+
+void arch_release_task_struct(struct task_struct *tsk)
+{
+	free_thread_xstate(tsk);
+}
+
+void arch_task_cache_init(void)
+{
+	if (!xstate_size)
+		return;
+
+	task_xstate_cachep = kmem_cache_create("task_xstate", xstate_size,
+					       __alignof__(union thread_xstate),
+					       SLAB_PANIC, NULL);
+}
+
+#ifdef CONFIG_SH_FPU_EMU
+# define HAVE_SOFTFP	1
+#else
+# define HAVE_SOFTFP	0
+#endif
+
+void init_thread_xstate(void)
+{
+	if (boot_cpu_data.flags & CPU_HAS_FPU)
+		xstate_size = sizeof(struct sh_fpu_hard_struct);
+	else if (HAVE_SOFTFP)
+		xstate_size = sizeof(struct sh_fpu_soft_struct);
+	else
+		xstate_size = 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/process_32.c b/src/kernel/linux/v4.14/arch/sh/kernel/process_32.c
new file mode 100644
index 0000000..2c7bdf8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/process_32.c
@@ -0,0 +1,232 @@
+/*
+ * arch/sh/kernel/process.c
+ *
+ * This file handles the architecture-dependent parts of process handling..
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *
+ *  SuperH version:  Copyright (C) 1999, 2000  Niibe Yutaka & Kaz Kojima
+ *		     Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC
+ *		     Copyright (C) 2002 - 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task.h>
+#include <linux/sched/task_stack.h>
+#include <linux/slab.h>
+#include <linux/elfcore.h>
+#include <linux/kallsyms.h>
+#include <linux/fs.h>
+#include <linux/ftrace.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/prefetch.h>
+#include <linux/stackprotector.h>
+#include <linux/uaccess.h>
+#include <asm/mmu_context.h>
+#include <asm/fpu.h>
+#include <asm/syscalls.h>
+#include <asm/switch_to.h>
+
+void show_regs(struct pt_regs * regs)
+{
+	printk("\n");
+	show_regs_print_info(KERN_DEFAULT);
+
+	print_symbol("PC is at %s\n", instruction_pointer(regs));
+	print_symbol("PR is at %s\n", regs->pr);
+
+	printk("PC  : %08lx SP  : %08lx SR  : %08lx ",
+	       regs->pc, regs->regs[15], regs->sr);
+#ifdef CONFIG_MMU
+	printk("TEA : %08x\n", __raw_readl(MMU_TEA));
+#else
+	printk("\n");
+#endif
+
+	printk("R0  : %08lx R1  : %08lx R2  : %08lx R3  : %08lx\n",
+	       regs->regs[0],regs->regs[1],
+	       regs->regs[2],regs->regs[3]);
+	printk("R4  : %08lx R5  : %08lx R6  : %08lx R7  : %08lx\n",
+	       regs->regs[4],regs->regs[5],
+	       regs->regs[6],regs->regs[7]);
+	printk("R8  : %08lx R9  : %08lx R10 : %08lx R11 : %08lx\n",
+	       regs->regs[8],regs->regs[9],
+	       regs->regs[10],regs->regs[11]);
+	printk("R12 : %08lx R13 : %08lx R14 : %08lx\n",
+	       regs->regs[12],regs->regs[13],
+	       regs->regs[14]);
+	printk("MACH: %08lx MACL: %08lx GBR : %08lx PR  : %08lx\n",
+	       regs->mach, regs->macl, regs->gbr, regs->pr);
+
+	show_trace(NULL, (unsigned long *)regs->regs[15], regs);
+	show_code(regs);
+}
+
+void start_thread(struct pt_regs *regs, unsigned long new_pc,
+		  unsigned long new_sp)
+{
+	regs->pr = 0;
+	regs->sr = SR_FD;
+	regs->pc = new_pc;
+	regs->regs[15] = new_sp;
+
+	free_thread_xstate(current);
+}
+EXPORT_SYMBOL(start_thread);
+
+void flush_thread(void)
+{
+	struct task_struct *tsk = current;
+
+	flush_ptrace_hw_breakpoint(tsk);
+
+#if defined(CONFIG_SH_FPU)
+	/* Forget lazy FPU state */
+	clear_fpu(tsk, task_pt_regs(tsk));
+	clear_used_math();
+#endif
+}
+
+void release_thread(struct task_struct *dead_task)
+{
+	/* do nothing */
+}
+
+/* Fill in the fpu structure for a core dump.. */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
+{
+	int fpvalid = 0;
+
+#if defined(CONFIG_SH_FPU)
+	struct task_struct *tsk = current;
+
+	fpvalid = !!tsk_used_math(tsk);
+	if (fpvalid)
+		fpvalid = !fpregs_get(tsk, NULL, 0,
+				      sizeof(struct user_fpu_struct),
+				      fpu, NULL);
+#endif
+
+	return fpvalid;
+}
+EXPORT_SYMBOL(dump_fpu);
+
+asmlinkage void ret_from_fork(void);
+asmlinkage void ret_from_kernel_thread(void);
+
+int copy_thread(unsigned long clone_flags, unsigned long usp,
+		unsigned long arg, struct task_struct *p)
+{
+	struct thread_info *ti = task_thread_info(p);
+	struct pt_regs *childregs;
+
+#if defined(CONFIG_SH_DSP)
+	struct task_struct *tsk = current;
+
+	if (is_dsp_enabled(tsk)) {
+		/* We can use the __save_dsp or just copy the struct:
+		 * __save_dsp(p);
+		 * p->thread.dsp_status.status |= SR_DSP
+		 */
+		p->thread.dsp_status = tsk->thread.dsp_status;
+	}
+#endif
+
+	memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
+
+	childregs = task_pt_regs(p);
+	p->thread.sp = (unsigned long) childregs;
+	if (unlikely(p->flags & PF_KTHREAD)) {
+		memset(childregs, 0, sizeof(struct pt_regs));
+		p->thread.pc = (unsigned long) ret_from_kernel_thread;
+		childregs->regs[4] = arg;
+		childregs->regs[5] = usp;
+		childregs->sr = SR_MD;
+#if defined(CONFIG_SH_FPU)
+		childregs->sr |= SR_FD;
+#endif
+		ti->addr_limit = KERNEL_DS;
+		ti->status &= ~TS_USEDFPU;
+		p->thread.fpu_counter = 0;
+		return 0;
+	}
+	*childregs = *current_pt_regs();
+
+	if (usp)
+		childregs->regs[15] = usp;
+	ti->addr_limit = USER_DS;
+
+	if (clone_flags & CLONE_SETTLS)
+		childregs->gbr = childregs->regs[0];
+
+	childregs->regs[0] = 0; /* Set return value for child */
+	p->thread.pc = (unsigned long) ret_from_fork;
+	return 0;
+}
+
+/*
+ *	switch_to(x,y) should switch tasks from x to y.
+ *
+ */
+__notrace_funcgraph struct task_struct *
+__switch_to(struct task_struct *prev, struct task_struct *next)
+{
+	struct thread_struct *next_t = &next->thread;
+
+#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
+	__stack_chk_guard = next->stack_canary;
+#endif
+
+	unlazy_fpu(prev, task_pt_regs(prev));
+
+	/* we're going to use this soon, after a few expensive things */
+	if (next->thread.fpu_counter > 5)
+		prefetch(next_t->xstate);
+
+#ifdef CONFIG_MMU
+	/*
+	 * Restore the kernel mode register
+	 *	k7 (r7_bank1)
+	 */
+	asm volatile("ldc	%0, r7_bank"
+		     : /* no output */
+		     : "r" (task_thread_info(next)));
+#endif
+
+	/*
+	 * If the task has used fpu the last 5 timeslices, just do a full
+	 * restore of the math state immediately to avoid the trap; the
+	 * chances of needing FPU soon are obviously high now
+	 */
+	if (next->thread.fpu_counter > 5)
+		__fpu_state_restore();
+
+	return prev;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+	unsigned long pc;
+
+	if (!p || p == current || p->state == TASK_RUNNING)
+		return 0;
+
+	/*
+	 * The same comment as on the Alpha applies here, too ...
+	 */
+	pc = thread_saved_pc(p);
+
+#ifdef CONFIG_FRAME_POINTER
+	if (in_sched_functions(pc)) {
+		unsigned long schedule_frame = (unsigned long)p->thread.sp;
+		return ((unsigned long *)schedule_frame)[21];
+	}
+#endif
+
+	return pc;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/process_64.c b/src/kernel/linux/v4.14/arch/sh/kernel/process_64.c
new file mode 100644
index 0000000..ee2abe9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/process_64.c
@@ -0,0 +1,464 @@
+/*
+ * arch/sh/kernel/process_64.c
+ *
+ * This file handles the architecture-dependent parts of process handling..
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003 - 2007  Paul Mundt
+ * Copyright (C) 2003, 2004 Richard Curnow
+ *
+ * Started from SH3/4 version:
+ *   Copyright (C) 1999, 2000  Niibe Yutaka & Kaz Kojima
+ *
+ *   In turn started from i386 version:
+ *     Copyright (C) 1995  Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/ptrace.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task.h>
+#include <linux/sched/task_stack.h>
+#include <asm/syscalls.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/mmu_context.h>
+#include <asm/fpu.h>
+#include <asm/switch_to.h>
+
+struct task_struct *last_task_used_math = NULL;
+struct pt_regs fake_swapper_regs = { 0, };
+
+void show_regs(struct pt_regs *regs)
+{
+	unsigned long long ah, al, bh, bl, ch, cl;
+
+	printk("\n");
+	show_regs_print_info(KERN_DEFAULT);
+
+	ah = (regs->pc) >> 32;
+	al = (regs->pc) & 0xffffffff;
+	bh = (regs->regs[18]) >> 32;
+	bl = (regs->regs[18]) & 0xffffffff;
+	ch = (regs->regs[15]) >> 32;
+	cl = (regs->regs[15]) & 0xffffffff;
+	printk("PC  : %08Lx%08Lx LINK: %08Lx%08Lx SP  : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->sr) >> 32;
+	al = (regs->sr) & 0xffffffff;
+        asm volatile ("getcon   " __TEA ", %0" : "=r" (bh));
+        asm volatile ("getcon   " __TEA ", %0" : "=r" (bl));
+	bh = (bh) >> 32;
+	bl = (bl) & 0xffffffff;
+        asm volatile ("getcon   " __KCR0 ", %0" : "=r" (ch));
+        asm volatile ("getcon   " __KCR0 ", %0" : "=r" (cl));
+	ch = (ch) >> 32;
+	cl = (cl) & 0xffffffff;
+	printk("SR  : %08Lx%08Lx TEA : %08Lx%08Lx KCR0: %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[0]) >> 32;
+	al = (regs->regs[0]) & 0xffffffff;
+	bh = (regs->regs[1]) >> 32;
+	bl = (regs->regs[1]) & 0xffffffff;
+	ch = (regs->regs[2]) >> 32;
+	cl = (regs->regs[2]) & 0xffffffff;
+	printk("R0  : %08Lx%08Lx R1  : %08Lx%08Lx R2  : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[3]) >> 32;
+	al = (regs->regs[3]) & 0xffffffff;
+	bh = (regs->regs[4]) >> 32;
+	bl = (regs->regs[4]) & 0xffffffff;
+	ch = (regs->regs[5]) >> 32;
+	cl = (regs->regs[5]) & 0xffffffff;
+	printk("R3  : %08Lx%08Lx R4  : %08Lx%08Lx R5  : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[6]) >> 32;
+	al = (regs->regs[6]) & 0xffffffff;
+	bh = (regs->regs[7]) >> 32;
+	bl = (regs->regs[7]) & 0xffffffff;
+	ch = (regs->regs[8]) >> 32;
+	cl = (regs->regs[8]) & 0xffffffff;
+	printk("R6  : %08Lx%08Lx R7  : %08Lx%08Lx R8  : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[9]) >> 32;
+	al = (regs->regs[9]) & 0xffffffff;
+	bh = (regs->regs[10]) >> 32;
+	bl = (regs->regs[10]) & 0xffffffff;
+	ch = (regs->regs[11]) >> 32;
+	cl = (regs->regs[11]) & 0xffffffff;
+	printk("R9  : %08Lx%08Lx R10 : %08Lx%08Lx R11 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[12]) >> 32;
+	al = (regs->regs[12]) & 0xffffffff;
+	bh = (regs->regs[13]) >> 32;
+	bl = (regs->regs[13]) & 0xffffffff;
+	ch = (regs->regs[14]) >> 32;
+	cl = (regs->regs[14]) & 0xffffffff;
+	printk("R12 : %08Lx%08Lx R13 : %08Lx%08Lx R14 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[16]) >> 32;
+	al = (regs->regs[16]) & 0xffffffff;
+	bh = (regs->regs[17]) >> 32;
+	bl = (regs->regs[17]) & 0xffffffff;
+	ch = (regs->regs[19]) >> 32;
+	cl = (regs->regs[19]) & 0xffffffff;
+	printk("R16 : %08Lx%08Lx R17 : %08Lx%08Lx R19 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[20]) >> 32;
+	al = (regs->regs[20]) & 0xffffffff;
+	bh = (regs->regs[21]) >> 32;
+	bl = (regs->regs[21]) & 0xffffffff;
+	ch = (regs->regs[22]) >> 32;
+	cl = (regs->regs[22]) & 0xffffffff;
+	printk("R20 : %08Lx%08Lx R21 : %08Lx%08Lx R22 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[23]) >> 32;
+	al = (regs->regs[23]) & 0xffffffff;
+	bh = (regs->regs[24]) >> 32;
+	bl = (regs->regs[24]) & 0xffffffff;
+	ch = (regs->regs[25]) >> 32;
+	cl = (regs->regs[25]) & 0xffffffff;
+	printk("R23 : %08Lx%08Lx R24 : %08Lx%08Lx R25 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[26]) >> 32;
+	al = (regs->regs[26]) & 0xffffffff;
+	bh = (regs->regs[27]) >> 32;
+	bl = (regs->regs[27]) & 0xffffffff;
+	ch = (regs->regs[28]) >> 32;
+	cl = (regs->regs[28]) & 0xffffffff;
+	printk("R26 : %08Lx%08Lx R27 : %08Lx%08Lx R28 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[29]) >> 32;
+	al = (regs->regs[29]) & 0xffffffff;
+	bh = (regs->regs[30]) >> 32;
+	bl = (regs->regs[30]) & 0xffffffff;
+	ch = (regs->regs[31]) >> 32;
+	cl = (regs->regs[31]) & 0xffffffff;
+	printk("R29 : %08Lx%08Lx R30 : %08Lx%08Lx R31 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[32]) >> 32;
+	al = (regs->regs[32]) & 0xffffffff;
+	bh = (regs->regs[33]) >> 32;
+	bl = (regs->regs[33]) & 0xffffffff;
+	ch = (regs->regs[34]) >> 32;
+	cl = (regs->regs[34]) & 0xffffffff;
+	printk("R32 : %08Lx%08Lx R33 : %08Lx%08Lx R34 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[35]) >> 32;
+	al = (regs->regs[35]) & 0xffffffff;
+	bh = (regs->regs[36]) >> 32;
+	bl = (regs->regs[36]) & 0xffffffff;
+	ch = (regs->regs[37]) >> 32;
+	cl = (regs->regs[37]) & 0xffffffff;
+	printk("R35 : %08Lx%08Lx R36 : %08Lx%08Lx R37 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[38]) >> 32;
+	al = (regs->regs[38]) & 0xffffffff;
+	bh = (regs->regs[39]) >> 32;
+	bl = (regs->regs[39]) & 0xffffffff;
+	ch = (regs->regs[40]) >> 32;
+	cl = (regs->regs[40]) & 0xffffffff;
+	printk("R38 : %08Lx%08Lx R39 : %08Lx%08Lx R40 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[41]) >> 32;
+	al = (regs->regs[41]) & 0xffffffff;
+	bh = (regs->regs[42]) >> 32;
+	bl = (regs->regs[42]) & 0xffffffff;
+	ch = (regs->regs[43]) >> 32;
+	cl = (regs->regs[43]) & 0xffffffff;
+	printk("R41 : %08Lx%08Lx R42 : %08Lx%08Lx R43 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[44]) >> 32;
+	al = (regs->regs[44]) & 0xffffffff;
+	bh = (regs->regs[45]) >> 32;
+	bl = (regs->regs[45]) & 0xffffffff;
+	ch = (regs->regs[46]) >> 32;
+	cl = (regs->regs[46]) & 0xffffffff;
+	printk("R44 : %08Lx%08Lx R45 : %08Lx%08Lx R46 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[47]) >> 32;
+	al = (regs->regs[47]) & 0xffffffff;
+	bh = (regs->regs[48]) >> 32;
+	bl = (regs->regs[48]) & 0xffffffff;
+	ch = (regs->regs[49]) >> 32;
+	cl = (regs->regs[49]) & 0xffffffff;
+	printk("R47 : %08Lx%08Lx R48 : %08Lx%08Lx R49 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[50]) >> 32;
+	al = (regs->regs[50]) & 0xffffffff;
+	bh = (regs->regs[51]) >> 32;
+	bl = (regs->regs[51]) & 0xffffffff;
+	ch = (regs->regs[52]) >> 32;
+	cl = (regs->regs[52]) & 0xffffffff;
+	printk("R50 : %08Lx%08Lx R51 : %08Lx%08Lx R52 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[53]) >> 32;
+	al = (regs->regs[53]) & 0xffffffff;
+	bh = (regs->regs[54]) >> 32;
+	bl = (regs->regs[54]) & 0xffffffff;
+	ch = (regs->regs[55]) >> 32;
+	cl = (regs->regs[55]) & 0xffffffff;
+	printk("R53 : %08Lx%08Lx R54 : %08Lx%08Lx R55 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[56]) >> 32;
+	al = (regs->regs[56]) & 0xffffffff;
+	bh = (regs->regs[57]) >> 32;
+	bl = (regs->regs[57]) & 0xffffffff;
+	ch = (regs->regs[58]) >> 32;
+	cl = (regs->regs[58]) & 0xffffffff;
+	printk("R56 : %08Lx%08Lx R57 : %08Lx%08Lx R58 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[59]) >> 32;
+	al = (regs->regs[59]) & 0xffffffff;
+	bh = (regs->regs[60]) >> 32;
+	bl = (regs->regs[60]) & 0xffffffff;
+	ch = (regs->regs[61]) >> 32;
+	cl = (regs->regs[61]) & 0xffffffff;
+	printk("R59 : %08Lx%08Lx R60 : %08Lx%08Lx R61 : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->regs[62]) >> 32;
+	al = (regs->regs[62]) & 0xffffffff;
+	bh = (regs->tregs[0]) >> 32;
+	bl = (regs->tregs[0]) & 0xffffffff;
+	ch = (regs->tregs[1]) >> 32;
+	cl = (regs->tregs[1]) & 0xffffffff;
+	printk("R62 : %08Lx%08Lx T0  : %08Lx%08Lx T1  : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->tregs[2]) >> 32;
+	al = (regs->tregs[2]) & 0xffffffff;
+	bh = (regs->tregs[3]) >> 32;
+	bl = (regs->tregs[3]) & 0xffffffff;
+	ch = (regs->tregs[4]) >> 32;
+	cl = (regs->tregs[4]) & 0xffffffff;
+	printk("T2  : %08Lx%08Lx T3  : %08Lx%08Lx T4  : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	ah = (regs->tregs[5]) >> 32;
+	al = (regs->tregs[5]) & 0xffffffff;
+	bh = (regs->tregs[6]) >> 32;
+	bl = (regs->tregs[6]) & 0xffffffff;
+	ch = (regs->tregs[7]) >> 32;
+	cl = (regs->tregs[7]) & 0xffffffff;
+	printk("T5  : %08Lx%08Lx T6  : %08Lx%08Lx T7  : %08Lx%08Lx\n",
+	       ah, al, bh, bl, ch, cl);
+
+	/*
+	 * If we're in kernel mode, dump the stack too..
+	 */
+	if (!user_mode(regs)) {
+		void show_stack(struct task_struct *tsk, unsigned long *sp);
+		unsigned long sp = regs->regs[15] & 0xffffffff;
+		struct task_struct *tsk = get_current();
+
+		tsk->thread.kregs = regs;
+
+		show_stack(tsk, (unsigned long *)sp);
+	}
+}
+
+/*
+ * Free current thread data structures etc..
+ */
+void exit_thread(struct task_struct *tsk)
+{
+	/*
+	 * See arch/sparc/kernel/process.c for the precedent for doing
+	 * this -- RPC.
+	 *
+	 * The SH-5 FPU save/restore approach relies on
+	 * last_task_used_math pointing to a live task_struct.  When
+	 * another task tries to use the FPU for the 1st time, the FPUDIS
+	 * trap handling (see arch/sh/kernel/cpu/sh5/fpu.c) will save the
+	 * existing FPU state to the FP regs field within
+	 * last_task_used_math before re-loading the new task's FPU state
+	 * (or initialising it if the FPU has been used before).  So if
+	 * last_task_used_math is stale, and its page has already been
+	 * re-allocated for another use, the consequences are rather
+	 * grim. Unless we null it here, there is no other path through
+	 * which it would get safely nulled.
+	 */
+#ifdef CONFIG_SH_FPU
+	if (last_task_used_math == tsk)
+		last_task_used_math = NULL;
+#endif
+}
+
+void flush_thread(void)
+{
+
+	/* Called by fs/exec.c (setup_new_exec) to remove traces of a
+	 * previously running executable. */
+#ifdef CONFIG_SH_FPU
+	if (last_task_used_math == current) {
+		last_task_used_math = NULL;
+	}
+	/* Force FPU state to be reinitialised after exec */
+	clear_used_math();
+#endif
+
+	/* if we are a kernel thread, about to change to user thread,
+         * update kreg
+         */
+	if(current->thread.kregs==&fake_swapper_regs) {
+          current->thread.kregs =
+             ((struct pt_regs *)(THREAD_SIZE + (unsigned long) current) - 1);
+	  current->thread.uregs = current->thread.kregs;
+	}
+}
+
+void release_thread(struct task_struct *dead_task)
+{
+	/* do nothing */
+}
+
+/* Fill in the fpu structure for a core dump.. */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
+{
+#ifdef CONFIG_SH_FPU
+	int fpvalid;
+	struct task_struct *tsk = current;
+
+	fpvalid = !!tsk_used_math(tsk);
+	if (fpvalid) {
+		if (current == last_task_used_math) {
+			enable_fpu();
+			save_fpu(tsk);
+			disable_fpu();
+			last_task_used_math = 0;
+			regs->sr |= SR_FD;
+		}
+
+		memcpy(fpu, &tsk->thread.xstate->hardfpu, sizeof(*fpu));
+	}
+
+	return fpvalid;
+#else
+	return 0; /* Task didn't use the fpu at all. */
+#endif
+}
+EXPORT_SYMBOL(dump_fpu);
+
+asmlinkage void ret_from_fork(void);
+asmlinkage void ret_from_kernel_thread(void);
+
+int copy_thread(unsigned long clone_flags, unsigned long usp,
+		unsigned long arg, struct task_struct *p)
+{
+	struct pt_regs *childregs;
+
+#ifdef CONFIG_SH_FPU
+	/* can't happen for a kernel thread */
+	if (last_task_used_math == current) {
+		enable_fpu();
+		save_fpu(current);
+		disable_fpu();
+		last_task_used_math = NULL;
+		current_pt_regs()->sr |= SR_FD;
+	}
+#endif
+	/* Copy from sh version */
+	childregs = (struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1;
+	p->thread.sp = (unsigned long) childregs;
+
+	if (unlikely(p->flags & PF_KTHREAD)) {
+		memset(childregs, 0, sizeof(struct pt_regs));
+		childregs->regs[2] = (unsigned long)arg;
+		childregs->regs[3] = (unsigned long)usp;
+		childregs->sr = (1 << 30); /* not user_mode */
+		childregs->sr |= SR_FD; /* Invalidate FPU flag */
+		p->thread.pc = (unsigned long) ret_from_kernel_thread;
+		return 0;
+	}
+	*childregs = *current_pt_regs();
+
+	/*
+	 * Sign extend the edited stack.
+	 * Note that thread.pc and thread.pc will stay
+	 * 32-bit wide and context switch must take care
+	 * of NEFF sign extension.
+	 */
+	if (usp)
+		childregs->regs[15] = neff_sign_extend(usp);
+	p->thread.uregs = childregs;
+
+	childregs->regs[9] = 0; /* Set return value for child */
+	childregs->sr |= SR_FD; /* Invalidate FPU flag */
+
+	p->thread.pc = (unsigned long) ret_from_fork;
+
+	return 0;
+}
+
+#ifdef CONFIG_FRAME_POINTER
+static int in_sh64_switch_to(unsigned long pc)
+{
+	extern char __sh64_switch_to_end;
+	/* For a sleeping task, the PC is somewhere in the middle of the function,
+	   so we don't have to worry about masking the LSB off */
+	return (pc >= (unsigned long) sh64_switch_to) &&
+	       (pc < (unsigned long) &__sh64_switch_to_end);
+}
+#endif
+
+unsigned long get_wchan(struct task_struct *p)
+{
+	unsigned long pc;
+
+	if (!p || p == current || p->state == TASK_RUNNING)
+		return 0;
+
+	/*
+	 * The same comment as on the Alpha applies here, too ...
+	 */
+	pc = thread_saved_pc(p);
+
+#ifdef CONFIG_FRAME_POINTER
+	if (in_sh64_switch_to(pc)) {
+		unsigned long schedule_fp;
+		unsigned long sh64_switch_to_fp;
+		unsigned long schedule_caller_pc;
+
+		sh64_switch_to_fp = (long) p->thread.sp;
+		/* r14 is saved at offset 4 in the sh64_switch_to frame */
+		schedule_fp = *(unsigned long *) (long)(sh64_switch_to_fp + 4);
+
+		/* and the caller of 'schedule' is (currently!) saved at offset 24
+		   in the frame of schedule (from disasm) */
+		schedule_caller_pc = *(unsigned long *) (long)(schedule_fp + 24);
+		return schedule_caller_pc;
+	}
+#endif
+	return pc;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/ptrace.c b/src/kernel/linux/v4.14/arch/sh/kernel/ptrace.c
new file mode 100644
index 0000000..bfc59f2
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/ptrace.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/ptrace.h>
+
+/**
+ * regs_query_register_offset() - query register offset from its name
+ * @name:	the name of a register
+ *
+ * regs_query_register_offset() returns the offset of a register in struct
+ * pt_regs from its name. If the name is invalid, this returns -EINVAL;
+ */
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+/**
+ * regs_query_register_name() - query register name from its offset
+ * @offset:	the offset of a register in struct pt_regs.
+ *
+ * regs_query_register_name() returns the name of a register from its
+ * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
+ */
+const char *regs_query_register_name(unsigned int offset)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (roff->offset == offset)
+			return roff->name;
+	return NULL;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/ptrace_32.c b/src/kernel/linux/v4.14/arch/sh/kernel/ptrace_32.c
new file mode 100644
index 0000000..5fc3ff6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/ptrace_32.c
@@ -0,0 +1,524 @@
+/*
+ * SuperH process tracing
+ *
+ * Copyright (C) 1999, 2000  Kaz Kojima & Niibe Yutaka
+ * Copyright (C) 2002 - 2009  Paul Mundt
+ *
+ * Audit support by Yuichi Nakamura <ynakam@hitachisoft.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/signal.h>
+#include <linux/io.h>
+#include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/tracehook.h>
+#include <linux/elf.h>
+#include <linux/regset.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/mmu_context.h>
+#include <asm/syscalls.h>
+#include <asm/fpu.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
+/*
+ * This routine will get a word off of the process kernel stack.
+ */
+static inline int get_stack_long(struct task_struct *task, int offset)
+{
+	unsigned char *stack;
+
+	stack = (unsigned char *)task_pt_regs(task);
+	stack += offset;
+	return (*((int *)stack));
+}
+
+/*
+ * This routine will put a word on the process kernel stack.
+ */
+static inline int put_stack_long(struct task_struct *task, int offset,
+				 unsigned long data)
+{
+	unsigned char *stack;
+
+	stack = (unsigned char *)task_pt_regs(task);
+	stack += offset;
+	*(unsigned long *) stack = data;
+	return 0;
+}
+
+void ptrace_triggered(struct perf_event *bp,
+		      struct perf_sample_data *data, struct pt_regs *regs)
+{
+	struct perf_event_attr attr;
+
+	/*
+	 * Disable the breakpoint request here since ptrace has defined a
+	 * one-shot behaviour for breakpoint exceptions.
+	 */
+	attr = bp->attr;
+	attr.disabled = true;
+	modify_user_hw_breakpoint(bp, &attr);
+}
+
+static int set_single_step(struct task_struct *tsk, unsigned long addr)
+{
+	struct thread_struct *thread = &tsk->thread;
+	struct perf_event *bp;
+	struct perf_event_attr attr;
+
+	bp = thread->ptrace_bps[0];
+	if (!bp) {
+		ptrace_breakpoint_init(&attr);
+
+		attr.bp_addr = addr;
+		attr.bp_len = HW_BREAKPOINT_LEN_2;
+		attr.bp_type = HW_BREAKPOINT_R;
+
+		bp = register_user_hw_breakpoint(&attr, ptrace_triggered,
+						 NULL, tsk);
+		if (IS_ERR(bp))
+			return PTR_ERR(bp);
+
+		thread->ptrace_bps[0] = bp;
+	} else {
+		int err;
+
+		attr = bp->attr;
+		attr.bp_addr = addr;
+		/* reenable breakpoint */
+		attr.disabled = false;
+		err = modify_user_hw_breakpoint(bp, &attr);
+		if (unlikely(err))
+			return err;
+	}
+
+	return 0;
+}
+
+void user_enable_single_step(struct task_struct *child)
+{
+	unsigned long pc = get_stack_long(child, offsetof(struct pt_regs, pc));
+
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
+
+	set_single_step(child, pc);
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure single step bits etc are not set.
+ */
+void ptrace_disable(struct task_struct *child)
+{
+	user_disable_single_step(child);
+}
+
+static int genregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
+{
+	const struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  regs->regs,
+				  0, 16 * sizeof(unsigned long));
+	if (!ret)
+		/* PC, PR, SR, GBR, MACH, MACL, TRA */
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+					  &regs->pc,
+					  offsetof(struct pt_regs, pc),
+					  sizeof(struct pt_regs));
+	if (!ret)
+		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					       sizeof(struct pt_regs), -1);
+
+	return ret;
+}
+
+static int genregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 regs->regs,
+				 0, 16 * sizeof(unsigned long));
+	if (!ret && count > 0)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 &regs->pc,
+					 offsetof(struct pt_regs, pc),
+					 sizeof(struct pt_regs));
+	if (!ret)
+		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+						sizeof(struct pt_regs), -1);
+
+	return ret;
+}
+
+#ifdef CONFIG_SH_FPU
+int fpregs_get(struct task_struct *target,
+	       const struct user_regset *regset,
+	       unsigned int pos, unsigned int count,
+	       void *kbuf, void __user *ubuf)
+{
+	int ret;
+
+	ret = init_fpu(target);
+	if (ret)
+		return ret;
+
+	if ((boot_cpu_data.flags & CPU_HAS_FPU))
+		return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+					   &target->thread.xstate->hardfpu, 0, -1);
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   &target->thread.xstate->softfpu, 0, -1);
+}
+
+static int fpregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+
+	ret = init_fpu(target);
+	if (ret)
+		return ret;
+
+	set_stopped_child_used_math(target);
+
+	if ((boot_cpu_data.flags & CPU_HAS_FPU))
+		return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					  &target->thread.xstate->hardfpu, 0, -1);
+
+	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.xstate->softfpu, 0, -1);
+}
+
+static int fpregs_active(struct task_struct *target,
+			 const struct user_regset *regset)
+{
+	return tsk_used_math(target) ? regset->n : 0;
+}
+#endif
+
+#ifdef CONFIG_SH_DSP
+static int dspregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
+{
+	const struct pt_dspregs *regs =
+		(struct pt_dspregs *)&target->thread.dsp_status.dsp_regs;
+	int ret;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, regs,
+				  0, sizeof(struct pt_dspregs));
+	if (!ret)
+		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					       sizeof(struct pt_dspregs), -1);
+
+	return ret;
+}
+
+static int dspregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct pt_dspregs *regs =
+		(struct pt_dspregs *)&target->thread.dsp_status.dsp_regs;
+	int ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, regs,
+				 0, sizeof(struct pt_dspregs));
+	if (!ret)
+		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+						sizeof(struct pt_dspregs), -1);
+
+	return ret;
+}
+
+static int dspregs_active(struct task_struct *target,
+			  const struct user_regset *regset)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+
+	return regs->sr & SR_DSP ? regset->n : 0;
+}
+#endif
+
+const struct pt_regs_offset regoffset_table[] = {
+	REGS_OFFSET_NAME(0),
+	REGS_OFFSET_NAME(1),
+	REGS_OFFSET_NAME(2),
+	REGS_OFFSET_NAME(3),
+	REGS_OFFSET_NAME(4),
+	REGS_OFFSET_NAME(5),
+	REGS_OFFSET_NAME(6),
+	REGS_OFFSET_NAME(7),
+	REGS_OFFSET_NAME(8),
+	REGS_OFFSET_NAME(9),
+	REGS_OFFSET_NAME(10),
+	REGS_OFFSET_NAME(11),
+	REGS_OFFSET_NAME(12),
+	REGS_OFFSET_NAME(13),
+	REGS_OFFSET_NAME(14),
+	REGS_OFFSET_NAME(15),
+	REG_OFFSET_NAME(pc),
+	REG_OFFSET_NAME(pr),
+	REG_OFFSET_NAME(sr),
+	REG_OFFSET_NAME(gbr),
+	REG_OFFSET_NAME(mach),
+	REG_OFFSET_NAME(macl),
+	REG_OFFSET_NAME(tra),
+	REG_OFFSET_END,
+};
+
+/*
+ * These are our native regset flavours.
+ */
+enum sh_regset {
+	REGSET_GENERAL,
+#ifdef CONFIG_SH_FPU
+	REGSET_FPU,
+#endif
+#ifdef CONFIG_SH_DSP
+	REGSET_DSP,
+#endif
+};
+
+static const struct user_regset sh_regsets[] = {
+	/*
+	 * Format is:
+	 *	R0 --> R15
+	 *	PC, PR, SR, GBR, MACH, MACL, TRA
+	 */
+	[REGSET_GENERAL] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= ELF_NGREG,
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= genregs_get,
+		.set		= genregs_set,
+	},
+
+#ifdef CONFIG_SH_FPU
+	[REGSET_FPU] = {
+		.core_note_type	= NT_PRFPREG,
+		.n		= sizeof(struct user_fpu_struct) / sizeof(long),
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= fpregs_get,
+		.set		= fpregs_set,
+		.active		= fpregs_active,
+	},
+#endif
+
+#ifdef CONFIG_SH_DSP
+	[REGSET_DSP] = {
+		.n		= sizeof(struct pt_dspregs) / sizeof(long),
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= dspregs_get,
+		.set		= dspregs_set,
+		.active		= dspregs_active,
+	},
+#endif
+};
+
+static const struct user_regset_view user_sh_native_view = {
+	.name		= "sh",
+	.e_machine	= EM_SH,
+	.regsets	= sh_regsets,
+	.n		= ARRAY_SIZE(sh_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_sh_native_view;
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
+{
+	unsigned long __user *datap = (unsigned long __user *)data;
+	int ret;
+
+	switch (request) {
+	/* read the word at location addr in the USER area. */
+	case PTRACE_PEEKUSR: {
+		unsigned long tmp;
+
+		ret = -EIO;
+		if ((addr & 3) || addr < 0 ||
+		    addr > sizeof(struct user) - 3)
+			break;
+
+		if (addr < sizeof(struct pt_regs))
+			tmp = get_stack_long(child, addr);
+		else if (addr >= offsetof(struct user, fpu) &&
+			 addr < offsetof(struct user, u_fpvalid)) {
+			if (!tsk_used_math(child)) {
+				if (addr == offsetof(struct user, fpu.fpscr))
+					tmp = FPSCR_INIT;
+				else
+					tmp = 0;
+			} else {
+				unsigned long index;
+				ret = init_fpu(child);
+				if (ret)
+					break;
+				index = addr - offsetof(struct user, fpu);
+				tmp = ((unsigned long *)child->thread.xstate)
+					[index >> 2];
+			}
+		} else if (addr == offsetof(struct user, u_fpvalid))
+			tmp = !!tsk_used_math(child);
+		else if (addr == PT_TEXT_ADDR)
+			tmp = child->mm->start_code;
+		else if (addr == PT_DATA_ADDR)
+			tmp = child->mm->start_data;
+		else if (addr == PT_TEXT_END_ADDR)
+			tmp = child->mm->end_code;
+		else if (addr == PT_TEXT_LEN)
+			tmp = child->mm->end_code - child->mm->start_code;
+		else
+			tmp = 0;
+		ret = put_user(tmp, datap);
+		break;
+	}
+
+	case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
+		ret = -EIO;
+		if ((addr & 3) || addr < 0 ||
+		    addr > sizeof(struct user) - 3)
+			break;
+
+		if (addr < sizeof(struct pt_regs))
+			ret = put_stack_long(child, addr, data);
+		else if (addr >= offsetof(struct user, fpu) &&
+			 addr < offsetof(struct user, u_fpvalid)) {
+			unsigned long index;
+			ret = init_fpu(child);
+			if (ret)
+				break;
+			index = addr - offsetof(struct user, fpu);
+			set_stopped_child_used_math(child);
+			((unsigned long *)child->thread.xstate)
+				[index >> 2] = data;
+			ret = 0;
+		} else if (addr == offsetof(struct user, u_fpvalid)) {
+			conditional_stopped_child_used_math(data, child);
+			ret = 0;
+		}
+		break;
+
+	case PTRACE_GETREGS:
+		return copy_regset_to_user(child, &user_sh_native_view,
+					   REGSET_GENERAL,
+					   0, sizeof(struct pt_regs),
+					   datap);
+	case PTRACE_SETREGS:
+		return copy_regset_from_user(child, &user_sh_native_view,
+					     REGSET_GENERAL,
+					     0, sizeof(struct pt_regs),
+					     datap);
+#ifdef CONFIG_SH_FPU
+	case PTRACE_GETFPREGS:
+		return copy_regset_to_user(child, &user_sh_native_view,
+					   REGSET_FPU,
+					   0, sizeof(struct user_fpu_struct),
+					   datap);
+	case PTRACE_SETFPREGS:
+		return copy_regset_from_user(child, &user_sh_native_view,
+					     REGSET_FPU,
+					     0, sizeof(struct user_fpu_struct),
+					     datap);
+#endif
+#ifdef CONFIG_SH_DSP
+	case PTRACE_GETDSPREGS:
+		return copy_regset_to_user(child, &user_sh_native_view,
+					   REGSET_DSP,
+					   0, sizeof(struct pt_dspregs),
+					   datap);
+	case PTRACE_SETDSPREGS:
+		return copy_regset_from_user(child, &user_sh_native_view,
+					     REGSET_DSP,
+					     0, sizeof(struct pt_dspregs),
+					     datap);
+#endif
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+
+	return ret;
+}
+
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
+{
+	long ret = 0;
+
+	secure_computing_strict(regs->regs[0]);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->regs[0].
+		 */
+		ret = -1L;
+
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_enter(regs, regs->regs[0]);
+
+	audit_syscall_entry(regs->regs[3], regs->regs[4], regs->regs[5],
+			    regs->regs[6], regs->regs[7]);
+
+	return ret ?: regs->regs[0];
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	int step;
+
+	audit_syscall_exit(regs);
+
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_exit(regs, regs->regs[0]);
+
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/ptrace_64.c b/src/kernel/linux/v4.14/arch/sh/kernel/ptrace_64.c
new file mode 100644
index 0000000..1e0656d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/ptrace_64.c
@@ -0,0 +1,579 @@
+/*
+ * arch/sh/kernel/ptrace_64.c
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003 - 2008  Paul Mundt
+ *
+ * Started from SH3/4 version:
+ *   SuperH version:   Copyright (C) 1999, 2000  Kaz Kojima & Niibe Yutaka
+ *
+ *   Original x86 implementation:
+ *	By Ross Biro 1/23/92
+ *	edited by Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/signal.h>
+#include <linux/syscalls.h>
+#include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/tracehook.h>
+#include <linux/elf.h>
+#include <linux/regset.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/mmu_context.h>
+#include <asm/syscalls.h>
+#include <asm/fpu.h>
+#include <asm/traps.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
+/* This mask defines the bits of the SR which the user is not allowed to
+   change, which are everything except S, Q, M, PR, SZ, FR. */
+#define SR_MASK      (0xffff8cfd)
+
+/*
+ * does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+/*
+ * This routine will get a word from the user area in the process kernel stack.
+ */
+static inline int get_stack_long(struct task_struct *task, int offset)
+{
+	unsigned char *stack;
+
+	stack = (unsigned char *)(task->thread.uregs);
+	stack += offset;
+	return (*((int *)stack));
+}
+
+static inline unsigned long
+get_fpu_long(struct task_struct *task, unsigned long addr)
+{
+	unsigned long tmp;
+	struct pt_regs *regs;
+	regs = (struct pt_regs*)((unsigned char *)task + THREAD_SIZE) - 1;
+
+	if (!tsk_used_math(task)) {
+		if (addr == offsetof(struct user_fpu_struct, fpscr)) {
+			tmp = FPSCR_INIT;
+		} else {
+			tmp = 0xffffffffUL; /* matches initial value in fpu.c */
+		}
+		return tmp;
+	}
+
+	if (last_task_used_math == task) {
+		enable_fpu();
+		save_fpu(task);
+		disable_fpu();
+		last_task_used_math = 0;
+		regs->sr |= SR_FD;
+	}
+
+	tmp = ((long *)task->thread.xstate)[addr / sizeof(unsigned long)];
+	return tmp;
+}
+
+/*
+ * This routine will put a word into the user area in the process kernel stack.
+ */
+static inline int put_stack_long(struct task_struct *task, int offset,
+				 unsigned long data)
+{
+	unsigned char *stack;
+
+	stack = (unsigned char *)(task->thread.uregs);
+	stack += offset;
+	*(unsigned long *) stack = data;
+	return 0;
+}
+
+static inline int
+put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data)
+{
+	struct pt_regs *regs;
+
+	regs = (struct pt_regs*)((unsigned char *)task + THREAD_SIZE) - 1;
+
+	if (!tsk_used_math(task)) {
+		init_fpu(task);
+	} else if (last_task_used_math == task) {
+		enable_fpu();
+		save_fpu(task);
+		disable_fpu();
+		last_task_used_math = 0;
+		regs->sr |= SR_FD;
+	}
+
+	((long *)task->thread.xstate)[addr / sizeof(unsigned long)] = data;
+	return 0;
+}
+
+void user_enable_single_step(struct task_struct *child)
+{
+	struct pt_regs *regs = child->thread.uregs;
+
+	regs->sr |= SR_SSTEP;	/* auto-resetting upon exception */
+
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	struct pt_regs *regs = child->thread.uregs;
+
+	regs->sr &= ~SR_SSTEP;
+
+	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+}
+
+static int genregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
+{
+	const struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	/* PC, SR, SYSCALL */
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &regs->pc,
+				  0, 3 * sizeof(unsigned long long));
+
+	/* R1 -> R63 */
+	if (!ret)
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+					  regs->regs,
+					  offsetof(struct pt_regs, regs[0]),
+					  63 * sizeof(unsigned long long));
+	/* TR0 -> TR7 */
+	if (!ret)
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+					  regs->tregs,
+					  offsetof(struct pt_regs, tregs[0]),
+					  8 * sizeof(unsigned long long));
+
+	if (!ret)
+		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					       sizeof(struct pt_regs), -1);
+
+	return ret;
+}
+
+static int genregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	/* PC, SR, SYSCALL */
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &regs->pc,
+				 0, 3 * sizeof(unsigned long long));
+
+	/* R1 -> R63 */
+	if (!ret && count > 0)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 regs->regs,
+					 offsetof(struct pt_regs, regs[0]),
+					 63 * sizeof(unsigned long long));
+
+	/* TR0 -> TR7 */
+	if (!ret && count > 0)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 regs->tregs,
+					 offsetof(struct pt_regs, tregs[0]),
+					 8 * sizeof(unsigned long long));
+
+	if (!ret)
+		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+						sizeof(struct pt_regs), -1);
+
+	return ret;
+}
+
+#ifdef CONFIG_SH_FPU
+int fpregs_get(struct task_struct *target,
+	       const struct user_regset *regset,
+	       unsigned int pos, unsigned int count,
+	       void *kbuf, void __user *ubuf)
+{
+	int ret;
+
+	ret = init_fpu(target);
+	if (ret)
+		return ret;
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   &target->thread.xstate->hardfpu, 0, -1);
+}
+
+static int fpregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+
+	ret = init_fpu(target);
+	if (ret)
+		return ret;
+
+	set_stopped_child_used_math(target);
+
+	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.xstate->hardfpu, 0, -1);
+}
+
+static int fpregs_active(struct task_struct *target,
+			 const struct user_regset *regset)
+{
+	return tsk_used_math(target) ? regset->n : 0;
+}
+#endif
+
+const struct pt_regs_offset regoffset_table[] = {
+	REG_OFFSET_NAME(pc),
+	REG_OFFSET_NAME(sr),
+	REG_OFFSET_NAME(syscall_nr),
+	REGS_OFFSET_NAME(0),
+	REGS_OFFSET_NAME(1),
+	REGS_OFFSET_NAME(2),
+	REGS_OFFSET_NAME(3),
+	REGS_OFFSET_NAME(4),
+	REGS_OFFSET_NAME(5),
+	REGS_OFFSET_NAME(6),
+	REGS_OFFSET_NAME(7),
+	REGS_OFFSET_NAME(8),
+	REGS_OFFSET_NAME(9),
+	REGS_OFFSET_NAME(10),
+	REGS_OFFSET_NAME(11),
+	REGS_OFFSET_NAME(12),
+	REGS_OFFSET_NAME(13),
+	REGS_OFFSET_NAME(14),
+	REGS_OFFSET_NAME(15),
+	REGS_OFFSET_NAME(16),
+	REGS_OFFSET_NAME(17),
+	REGS_OFFSET_NAME(18),
+	REGS_OFFSET_NAME(19),
+	REGS_OFFSET_NAME(20),
+	REGS_OFFSET_NAME(21),
+	REGS_OFFSET_NAME(22),
+	REGS_OFFSET_NAME(23),
+	REGS_OFFSET_NAME(24),
+	REGS_OFFSET_NAME(25),
+	REGS_OFFSET_NAME(26),
+	REGS_OFFSET_NAME(27),
+	REGS_OFFSET_NAME(28),
+	REGS_OFFSET_NAME(29),
+	REGS_OFFSET_NAME(30),
+	REGS_OFFSET_NAME(31),
+	REGS_OFFSET_NAME(32),
+	REGS_OFFSET_NAME(33),
+	REGS_OFFSET_NAME(34),
+	REGS_OFFSET_NAME(35),
+	REGS_OFFSET_NAME(36),
+	REGS_OFFSET_NAME(37),
+	REGS_OFFSET_NAME(38),
+	REGS_OFFSET_NAME(39),
+	REGS_OFFSET_NAME(40),
+	REGS_OFFSET_NAME(41),
+	REGS_OFFSET_NAME(42),
+	REGS_OFFSET_NAME(43),
+	REGS_OFFSET_NAME(44),
+	REGS_OFFSET_NAME(45),
+	REGS_OFFSET_NAME(46),
+	REGS_OFFSET_NAME(47),
+	REGS_OFFSET_NAME(48),
+	REGS_OFFSET_NAME(49),
+	REGS_OFFSET_NAME(50),
+	REGS_OFFSET_NAME(51),
+	REGS_OFFSET_NAME(52),
+	REGS_OFFSET_NAME(53),
+	REGS_OFFSET_NAME(54),
+	REGS_OFFSET_NAME(55),
+	REGS_OFFSET_NAME(56),
+	REGS_OFFSET_NAME(57),
+	REGS_OFFSET_NAME(58),
+	REGS_OFFSET_NAME(59),
+	REGS_OFFSET_NAME(60),
+	REGS_OFFSET_NAME(61),
+	REGS_OFFSET_NAME(62),
+	REGS_OFFSET_NAME(63),
+	TREGS_OFFSET_NAME(0),
+	TREGS_OFFSET_NAME(1),
+	TREGS_OFFSET_NAME(2),
+	TREGS_OFFSET_NAME(3),
+	TREGS_OFFSET_NAME(4),
+	TREGS_OFFSET_NAME(5),
+	TREGS_OFFSET_NAME(6),
+	TREGS_OFFSET_NAME(7),
+	REG_OFFSET_END,
+};
+
+/*
+ * These are our native regset flavours.
+ */
+enum sh_regset {
+	REGSET_GENERAL,
+#ifdef CONFIG_SH_FPU
+	REGSET_FPU,
+#endif
+};
+
+static const struct user_regset sh_regsets[] = {
+	/*
+	 * Format is:
+	 *	PC, SR, SYSCALL,
+	 *	R1 --> R63,
+	 *	TR0 --> TR7,
+	 */
+	[REGSET_GENERAL] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= ELF_NGREG,
+		.size		= sizeof(long long),
+		.align		= sizeof(long long),
+		.get		= genregs_get,
+		.set		= genregs_set,
+	},
+
+#ifdef CONFIG_SH_FPU
+	[REGSET_FPU] = {
+		.core_note_type	= NT_PRFPREG,
+		.n		= sizeof(struct user_fpu_struct) /
+				  sizeof(long long),
+		.size		= sizeof(long long),
+		.align		= sizeof(long long),
+		.get		= fpregs_get,
+		.set		= fpregs_set,
+		.active		= fpregs_active,
+	},
+#endif
+};
+
+static const struct user_regset_view user_sh64_native_view = {
+	.name		= "sh64",
+	.e_machine	= EM_SH,
+	.regsets	= sh_regsets,
+	.n		= ARRAY_SIZE(sh_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_sh64_native_view;
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
+{
+	int ret;
+	unsigned long __user *datap = (unsigned long __user *) data;
+
+	switch (request) {
+	/* read the word at location addr in the USER area. */
+	case PTRACE_PEEKUSR: {
+		unsigned long tmp;
+
+		ret = -EIO;
+		if ((addr & 3) || addr < 0)
+			break;
+
+		if (addr < sizeof(struct pt_regs))
+			tmp = get_stack_long(child, addr);
+		else if ((addr >= offsetof(struct user, fpu)) &&
+			 (addr <  offsetof(struct user, u_fpvalid))) {
+			unsigned long index;
+			ret = init_fpu(child);
+			if (ret)
+				break;
+			index = addr - offsetof(struct user, fpu);
+			tmp = get_fpu_long(child, index);
+		} else if (addr == offsetof(struct user, u_fpvalid)) {
+			tmp = !!tsk_used_math(child);
+		} else {
+			break;
+		}
+		ret = put_user(tmp, datap);
+		break;
+	}
+
+	case PTRACE_POKEUSR:
+                /* write the word at location addr in the USER area. We must
+                   disallow any changes to certain SR bits or u_fpvalid, since
+                   this could crash the kernel or result in a security
+                   loophole. */
+		ret = -EIO;
+		if ((addr & 3) || addr < 0)
+			break;
+
+		if (addr < sizeof(struct pt_regs)) {
+			/* Ignore change of top 32 bits of SR */
+			if (addr == offsetof (struct pt_regs, sr)+4)
+			{
+				ret = 0;
+				break;
+			}
+			/* If lower 32 bits of SR, ignore non-user bits */
+			if (addr == offsetof (struct pt_regs, sr))
+			{
+				long cursr = get_stack_long(child, addr);
+				data &= ~(SR_MASK);
+				data |= (cursr & SR_MASK);
+			}
+			ret = put_stack_long(child, addr, data);
+		}
+		else if ((addr >= offsetof(struct user, fpu)) &&
+			 (addr <  offsetof(struct user, u_fpvalid))) {
+			unsigned long index;
+			ret = init_fpu(child);
+			if (ret)
+				break;
+			index = addr - offsetof(struct user, fpu);
+			ret = put_fpu_long(child, index, data);
+		}
+		break;
+
+	case PTRACE_GETREGS:
+		return copy_regset_to_user(child, &user_sh64_native_view,
+					   REGSET_GENERAL,
+					   0, sizeof(struct pt_regs),
+					   datap);
+	case PTRACE_SETREGS:
+		return copy_regset_from_user(child, &user_sh64_native_view,
+					     REGSET_GENERAL,
+					     0, sizeof(struct pt_regs),
+					     datap);
+#ifdef CONFIG_SH_FPU
+	case PTRACE_GETFPREGS:
+		return copy_regset_to_user(child, &user_sh64_native_view,
+					   REGSET_FPU,
+					   0, sizeof(struct user_fpu_struct),
+					   datap);
+	case PTRACE_SETFPREGS:
+		return copy_regset_from_user(child, &user_sh64_native_view,
+					     REGSET_FPU,
+					     0, sizeof(struct user_fpu_struct),
+					     datap);
+#endif
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+
+	return ret;
+}
+
+asmlinkage int sh64_ptrace(long request, long pid,
+			   unsigned long addr, unsigned long data)
+{
+#define WPC_DBRMODE 0x0d104008
+	static unsigned long first_call;
+
+	if (!test_and_set_bit(0, &first_call)) {
+		/* Set WPC.DBRMODE to 0.  This makes all debug events get
+		 * delivered through RESVEC, i.e. into the handlers in entry.S.
+		 * (If the kernel was downloaded using a remote gdb, WPC.DBRMODE
+		 * would normally be left set to 1, which makes debug events get
+		 * delivered through DBRVEC, i.e. into the remote gdb's
+		 * handlers.  This prevents ptrace getting them, and confuses
+		 * the remote gdb.) */
+		printk("DBRMODE set to 0 to permit native debugging\n");
+		poke_real_address_q(WPC_DBRMODE, 0);
+	}
+
+	return sys_ptrace(request, pid, addr, data);
+}
+
+asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs)
+{
+	long long ret = 0;
+
+	secure_computing_strict(regs->regs[9]);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->regs[0].
+		 */
+		ret = -1LL;
+
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_enter(regs, regs->regs[9]);
+
+	audit_syscall_entry(regs->regs[1], regs->regs[2], regs->regs[3],
+			    regs->regs[4], regs->regs[5]);
+
+	return ret ?: regs->regs[9];
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	int step;
+
+	audit_syscall_exit(regs);
+
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_exit(regs, regs->regs[9]);
+
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
+}
+
+/* Called with interrupts disabled */
+asmlinkage void do_single_step(unsigned long long vec, struct pt_regs *regs)
+{
+	/* This is called after a single step exception (DEBUGSS).
+	   There is no need to change the PC, as it is a post-execution
+	   exception, as entry.S does not do anything to the PC for DEBUGSS.
+	   We need to clear the Single Step setting in SR to avoid
+	   continually stepping. */
+	local_irq_enable();
+	regs->sr &= ~SR_SSTEP;
+	force_sig(SIGTRAP, current);
+}
+
+/* Called with interrupts disabled */
+BUILD_TRAP_HANDLER(breakpoint)
+{
+	TRAP_HANDLER_DECL;
+
+	/* We need to forward step the PC, to counteract the backstep done
+	   in signal.c. */
+	local_irq_enable();
+	force_sig(SIGTRAP, current);
+	regs->pc += 4;
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure single step bits etc are not set.
+ */
+void ptrace_disable(struct task_struct *child)
+{
+	user_disable_single_step(child);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/reboot.c b/src/kernel/linux/v4.14/arch/sh/kernel/reboot.c
new file mode 100644
index 0000000..11001a8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/reboot.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/pm.h>
+#include <linux/kexec.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/module.h>
+#ifdef CONFIG_SUPERH32
+#include <asm/watchdog.h>
+#endif
+#include <asm/addrspace.h>
+#include <asm/reboot.h>
+#include <asm/tlbflush.h>
+#include <asm/traps.h>
+
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
+#ifdef CONFIG_SUPERH32
+static void watchdog_trigger_immediate(void)
+{
+	sh_wdt_write_cnt(0xFF);
+	sh_wdt_write_csr(0xC2);
+}
+#endif
+
+static void native_machine_restart(char * __unused)
+{
+	local_irq_disable();
+
+	/* Destroy all of the TLBs in preparation for reset by MMU */
+	__flush_tlb_global();
+
+	/* Address error with SR.BL=1 first. */
+	trigger_address_error();
+
+#ifdef CONFIG_SUPERH32
+	/* If that fails or is unsupported, go for the watchdog next. */
+	watchdog_trigger_immediate();
+#endif
+
+	/*
+	 * Give up and sleep.
+	 */
+	while (1)
+		cpu_sleep();
+}
+
+static void native_machine_shutdown(void)
+{
+	smp_send_stop();
+}
+
+static void native_machine_power_off(void)
+{
+	if (pm_power_off)
+		pm_power_off();
+}
+
+static void native_machine_halt(void)
+{
+	/* stop other cpus */
+	machine_shutdown();
+
+	/* stop this cpu */
+	stop_this_cpu(NULL);
+}
+
+struct machine_ops machine_ops = {
+	.power_off	= native_machine_power_off,
+	.shutdown	= native_machine_shutdown,
+	.restart	= native_machine_restart,
+	.halt		= native_machine_halt,
+#ifdef CONFIG_KEXEC
+	.crash_shutdown = native_machine_crash_shutdown,
+#endif
+};
+
+void machine_power_off(void)
+{
+	machine_ops.power_off();
+}
+
+void machine_shutdown(void)
+{
+	machine_ops.shutdown();
+}
+
+void machine_restart(char *cmd)
+{
+	machine_ops.restart(cmd);
+}
+
+void machine_halt(void)
+{
+	machine_ops.halt();
+}
+
+#ifdef CONFIG_KEXEC
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+	machine_ops.crash_shutdown(regs);
+}
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/relocate_kernel.S b/src/kernel/linux/v4.14/arch/sh/kernel/relocate_kernel.S
new file mode 100644
index 0000000..fcc9934
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/relocate_kernel.S
@@ -0,0 +1,232 @@
+/*
+ * relocate_kernel.S - put the kernel image in place to boot
+ * 2005.9.17 kogiidena@eggplant.ddo.jp
+ *
+ * LANDISK/sh4 is supported. Maybe, SH archtecture works well.
+ *
+ * 2009-03-18 Magnus Damm - Added Kexec Jump support
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2.  See the file COPYING for more details.
+ */
+#include <linux/linkage.h>
+#include <asm/addrspace.h>
+#include <asm/page.h>
+
+		.globl relocate_new_kernel
+relocate_new_kernel:
+	/* r4 = indirection_page   */
+	/* r5 = reboot_code_buffer */
+	/* r6 = start_address      */
+
+	mov.l	10f, r0		/* PAGE_SIZE */
+	add	r5, r0		/* setup new stack at end of control page */
+
+	/* save r15->r8 to new stack */
+	mov.l	r15, @-r0
+	mov	r0, r15
+	mov.l	r14, @-r15
+	mov.l	r13, @-r15
+	mov.l	r12, @-r15
+	mov.l	r11, @-r15
+	mov.l	r10, @-r15
+	mov.l	r9, @-r15
+	mov.l	r8, @-r15
+
+	/* save other random registers */
+	sts.l	macl, @-r15
+	sts.l	mach, @-r15
+	stc.l	gbr, @-r15
+	stc.l	ssr, @-r15
+	stc.l	sr, @-r15
+	sts.l	pr, @-r15
+	stc.l	spc, @-r15
+
+	/* switch to bank1 and save r7->r0 */
+	mov.l	12f, r9
+	stc	sr, r8
+	or	r9, r8
+	ldc	r8, sr
+	mov.l	r7, @-r15
+	mov.l	r6, @-r15
+	mov.l	r5, @-r15
+	mov.l	r4, @-r15
+	mov.l	r3, @-r15
+	mov.l	r2, @-r15
+	mov.l	r1, @-r15
+	mov.l	r0, @-r15
+
+	/* switch to bank0 and save r7->r0 */
+	mov.l	12f, r9
+	not	r9, r9
+	stc	sr, r8
+	and	r9, r8
+	ldc	r8, sr
+	mov.l	r7, @-r15
+	mov.l	r6, @-r15
+	mov.l	r5, @-r15
+	mov.l	r4, @-r15
+	mov.l	r3, @-r15
+	mov.l	r2, @-r15
+	mov.l	r1, @-r15
+	mov.l	r0, @-r15
+
+	mov.l	r4, @-r15	/* save indirection page again */
+
+	bsr	swap_pages	/* swap pages before jumping to new kernel */
+	 nop
+
+	mova	11f, r0
+	mov.l	r15, @r0	/* save pointer to stack */
+
+	jsr	@r6		/* hand over control to new kernel */
+	 nop
+
+	mov.l	11f, r15	/* get pointer to stack */
+	mov.l	@r15+, r4	/* restore r4 to get indirection page */
+
+	bsr	swap_pages	/* swap pages back to previous state */
+	 nop
+
+	/* make sure bank0 is active and restore r0->r7 */
+	mov.l	12f, r9
+	not	r9, r9
+	stc	sr, r8
+	and	r9, r8
+	ldc	r8, sr
+	mov.l	@r15+, r0
+	mov.l	@r15+, r1
+	mov.l	@r15+, r2
+	mov.l	@r15+, r3
+	mov.l	@r15+, r4
+	mov.l	@r15+, r5
+	mov.l	@r15+, r6
+	mov.l	@r15+, r7
+
+	/* switch to bank1 and restore r0->r7 */
+	mov.l	12f, r9
+	stc	sr, r8
+	or	r9, r8
+	ldc	r8, sr
+	mov.l	@r15+, r0
+	mov.l	@r15+, r1
+	mov.l	@r15+, r2
+	mov.l	@r15+, r3
+	mov.l	@r15+, r4
+	mov.l	@r15+, r5
+	mov.l	@r15+, r6
+	mov.l	@r15+, r7
+
+	/* switch back to bank0 */
+	mov.l	12f, r9
+	not	r9, r9
+	stc	sr, r8
+	and	r9, r8
+	ldc	r8, sr
+
+	/* restore other random registers */
+	ldc.l	@r15+, spc
+	lds.l	@r15+, pr
+	ldc.l	@r15+, sr
+	ldc.l	@r15+, ssr
+	ldc.l	@r15+, gbr
+	lds.l	@r15+, mach
+	lds.l	@r15+, macl
+
+	/* restore r8->r15 */
+	mov.l	@r15+, r8
+	mov.l	@r15+, r9
+	mov.l	@r15+, r10
+	mov.l	@r15+, r11
+	mov.l	@r15+, r12
+	mov.l	@r15+, r13
+	mov.l	@r15+, r14
+	mov.l	@r15+, r15
+	rts
+	 nop
+
+swap_pages:
+	bra	1f
+	 mov	r4,r0	  /* cmd = indirection_page */
+0:
+	mov.l	@r4+,r0	  /* cmd = *ind++ */
+
+1:	/* addr = cmd & 0xfffffff0 */
+	mov	r0,r2
+	mov	#-16,r1
+	and	r1,r2
+
+	/* if(cmd & IND_DESTINATION) dst = addr  */
+	tst	#1,r0
+	bt	2f
+	bra	0b
+	 mov	r2,r5
+
+2:	/* else if(cmd & IND_INDIRECTION) ind = addr  */
+	tst	#2,r0
+	bt	3f
+	bra	0b
+	 mov	r2,r4
+
+3:	/* else if(cmd & IND_DONE) return */
+	tst	#4,r0
+	bt	4f
+	rts
+	 nop
+
+4:	/* else if(cmd & IND_SOURCE) memcpy(dst,addr,PAGE_SIZE) */
+	tst	#8,r0
+	bt	0b
+
+	mov.l	10f,r3	  /* PAGE_SIZE */
+	shlr2	r3
+	shlr2	r3
+5:
+	dt	r3
+
+	/* regular kexec just overwrites the destination page
+	 * with the contents of the source page.
+	 * for the kexec jump case we need to swap the contents
+	 * of the pages.
+	 * to keep it simple swap the contents for both cases.
+	 */
+	mov.l	@(0, r2), r8
+	mov.l	@(0, r5), r1
+	mov.l	r8, @(0, r5)
+	mov.l	r1, @(0, r2)
+
+	mov.l	@(4, r2), r8
+	mov.l	@(4, r5), r1
+	mov.l	r8, @(4, r5)
+	mov.l	r1, @(4, r2)
+
+	mov.l	@(8, r2), r8
+	mov.l	@(8, r5), r1
+	mov.l	r8, @(8, r5)
+	mov.l	r1, @(8, r2)
+
+	mov.l	@(12, r2), r8
+	mov.l	@(12, r5), r1
+	mov.l	r8, @(12, r5)
+	mov.l	r1, @(12, r2)
+
+	add	#16,r5
+	add	#16,r2
+	bf	5b
+
+	bra	0b
+	 nop
+
+	.align 2
+10:
+	.long	PAGE_SIZE
+11:
+	.long	0
+12:
+	.long	0x20000000 ! RB=1
+
+relocate_new_kernel_end:
+
+	.globl relocate_new_kernel_size
+relocate_new_kernel_size:
+	.long relocate_new_kernel_end - relocate_new_kernel
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/return_address.c b/src/kernel/linux/v4.14/arch/sh/kernel/return_address.c
new file mode 100644
index 0000000..5124aeb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/return_address.c
@@ -0,0 +1,59 @@
+/*
+ * arch/sh/kernel/return_address.c
+ *
+ * Copyright (C) 2009  Matt Fleming
+ * Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/dwarf.h>
+
+#ifdef CONFIG_DWARF_UNWINDER
+
+void *return_address(unsigned int depth)
+{
+	struct dwarf_frame *frame;
+	unsigned long ra;
+	int i;
+
+	for (i = 0, frame = NULL, ra = 0; i <= depth; i++) {
+		struct dwarf_frame *tmp;
+
+		tmp = dwarf_unwind_stack(ra, frame);
+		if (!tmp)
+			return NULL;
+
+		if (frame)
+			dwarf_free_frame(frame);
+
+		frame = tmp;
+
+		if (!frame || !frame->return_addr)
+			break;
+
+		ra = frame->return_addr;
+	}
+
+	/* Failed to unwind the stack to the specified depth. */
+	WARN_ON(i != depth + 1);
+
+	if (frame)
+		dwarf_free_frame(frame);
+
+	return (void *)ra;
+}
+
+#else
+
+void *return_address(unsigned int depth)
+{
+	return NULL;
+}
+
+#endif
+
+EXPORT_SYMBOL_GPL(return_address);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/setup.c b/src/kernel/linux/v4.14/arch/sh/kernel/setup.c
new file mode 100644
index 0000000..b95c411
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/setup.c
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/kernel/setup.c
+ *
+ * This file handles the architecture-dependent parts of initialization
+ *
+ *  Copyright (C) 1999  Niibe Yutaka
+ *  Copyright (C) 2002 - 2010 Paul Mundt
+ */
+#include <linux/screen_info.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/initrd.h>
+#include <linux/bootmem.h>
+#include <linux/console.h>
+#include <linux/root_dev.h>
+#include <linux/utsname.h>
+#include <linux/nodemask.h>
+#include <linux/cpu.h>
+#include <linux/pfn.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/kexec.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/err.h>
+#include <linux/crash_dump.h>
+#include <linux/mmzone.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/uaccess.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/elf.h>
+#include <asm/sections.h>
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/clock.h>
+#include <asm/smp.h>
+#include <asm/mmu_context.h>
+#include <asm/mmzone.h>
+#include <asm/sparsemem.h>
+
+/*
+ * Initialize loops_per_jiffy as 10000000 (1000MIPS).
+ * This value will be used at the very early stage of serial setup.
+ * The bigger value means no problem.
+ */
+struct sh_cpuinfo cpu_data[NR_CPUS] __read_mostly = {
+	[0] = {
+		.type			= CPU_SH_NONE,
+		.family			= CPU_FAMILY_UNKNOWN,
+		.loops_per_jiffy	= 10000000,
+		.phys_bits		= MAX_PHYSMEM_BITS,
+	},
+};
+EXPORT_SYMBOL(cpu_data);
+
+/*
+ * The machine vector. First entry in .machvec.init, or clobbered by
+ * sh_mv= on the command line, prior to .machvec.init teardown.
+ */
+struct sh_machine_vector sh_mv = { .mv_name = "generic", };
+EXPORT_SYMBOL(sh_mv);
+
+#ifdef CONFIG_VT
+struct screen_info screen_info;
+#endif
+
+extern int root_mountflags;
+
+#define RAMDISK_IMAGE_START_MASK	0x07FF
+#define RAMDISK_PROMPT_FLAG		0x8000
+#define RAMDISK_LOAD_FLAG		0x4000
+
+static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, };
+
+static struct resource code_resource = {
+	.name = "Kernel code",
+	.flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
+};
+
+static struct resource data_resource = {
+	.name = "Kernel data",
+	.flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
+};
+
+static struct resource bss_resource = {
+	.name	= "Kernel bss",
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
+};
+
+unsigned long memory_start;
+EXPORT_SYMBOL(memory_start);
+unsigned long memory_end = 0;
+EXPORT_SYMBOL(memory_end);
+unsigned long memory_limit = 0;
+
+static struct resource mem_resources[MAX_NUMNODES];
+
+int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
+
+static int __init early_parse_mem(char *p)
+{
+	if (!p)
+		return 1;
+
+	memory_limit = PAGE_ALIGN(memparse(p, &p));
+
+	pr_notice("Memory limited to %ldMB\n", memory_limit >> 20);
+
+	return 0;
+}
+early_param("mem", early_parse_mem);
+
+void __init check_for_initrd(void)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+	unsigned long start, end;
+
+	/*
+	 * Check for the rare cases where boot loaders adhere to the boot
+	 * ABI.
+	 */
+	if (!LOADER_TYPE || !INITRD_START || !INITRD_SIZE)
+		goto disable;
+
+	start = INITRD_START + __MEMORY_START;
+	end = start + INITRD_SIZE;
+
+	if (unlikely(end <= start))
+		goto disable;
+	if (unlikely(start & ~PAGE_MASK)) {
+		pr_err("initrd must be page aligned\n");
+		goto disable;
+	}
+
+	if (unlikely(start < __MEMORY_START)) {
+		pr_err("initrd start (%08lx) < __MEMORY_START(%x)\n",
+			start, __MEMORY_START);
+		goto disable;
+	}
+
+	if (unlikely(end > memblock_end_of_DRAM())) {
+		pr_err("initrd extends beyond end of memory "
+		       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+		       end, (unsigned long)memblock_end_of_DRAM());
+		goto disable;
+	}
+
+	/*
+	 * If we got this far in spite of the boot loader's best efforts
+	 * to the contrary, assume we actually have a valid initrd and
+	 * fix up the root dev.
+	 */
+	ROOT_DEV = Root_RAM0;
+
+	/*
+	 * Address sanitization
+	 */
+	initrd_start = (unsigned long)__va(start);
+	initrd_end = initrd_start + INITRD_SIZE;
+
+	memblock_reserve(__pa(initrd_start), INITRD_SIZE);
+
+	return;
+
+disable:
+	pr_info("initrd disabled\n");
+	initrd_start = initrd_end = 0;
+#endif
+}
+
+#ifndef CONFIG_GENERIC_CALIBRATE_DELAY
+void calibrate_delay(void)
+{
+	struct clk *clk = clk_get(NULL, "cpu_clk");
+
+	if (IS_ERR(clk))
+		panic("Need a sane CPU clock definition!");
+
+	loops_per_jiffy = (clk_get_rate(clk) >> 1) / HZ;
+
+	printk(KERN_INFO "Calibrating delay loop (skipped)... "
+			 "%lu.%02lu BogoMIPS PRESET (lpj=%lu)\n",
+			 loops_per_jiffy/(500000/HZ),
+			 (loops_per_jiffy/(5000/HZ)) % 100,
+			 loops_per_jiffy);
+}
+#endif
+
+void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
+						unsigned long end_pfn)
+{
+	struct resource *res = &mem_resources[nid];
+	unsigned long start, end;
+
+	WARN_ON(res->name); /* max one active range per node for now */
+
+	start = start_pfn << PAGE_SHIFT;
+	end = end_pfn << PAGE_SHIFT;
+
+	res->name = "System RAM";
+	res->start = start;
+	res->end = end - 1;
+	res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
+
+	if (request_resource(&iomem_resource, res)) {
+		pr_err("unable to request memory_resource 0x%lx 0x%lx\n",
+		       start_pfn, end_pfn);
+		return;
+	}
+
+	/*
+	 * We don't know which RAM region contains kernel data or
+	 * the reserved crashkernel region, so try it repeatedly
+	 * and let the resource manager test it.
+	 */
+	request_resource(res, &code_resource);
+	request_resource(res, &data_resource);
+	request_resource(res, &bss_resource);
+#ifdef CONFIG_KEXEC
+	request_resource(res, &crashk_res);
+#endif
+
+	/*
+	 * Also make sure that there is a PMB mapping that covers this
+	 * range before we attempt to activate it, to avoid reset by MMU.
+	 * We can hit this path with NUMA or memory hot-add.
+	 */
+	pmb_bolt_mapping((unsigned long)__va(start), start, end - start,
+			 PAGE_KERNEL);
+
+	memblock_set_node(PFN_PHYS(start_pfn), PFN_PHYS(end_pfn - start_pfn),
+			  &memblock.memory, nid);
+}
+
+void __init __weak plat_early_device_setup(void)
+{
+}
+
+#ifdef CONFIG_OF_FLATTREE
+void __ref sh_fdt_init(phys_addr_t dt_phys)
+{
+	static int done = 0;
+	void *dt_virt;
+
+	/* Avoid calling an __init function on secondary cpus. */
+	if (done) return;
+
+#ifdef CONFIG_USE_BUILTIN_DTB
+	dt_virt = __dtb_start;
+#else
+	dt_virt = phys_to_virt(dt_phys);
+#endif
+
+	if (!dt_virt || !early_init_dt_scan(dt_virt)) {
+		pr_crit("Error: invalid device tree blob"
+			" at physical address %p\n", (void *)dt_phys);
+
+		while (true)
+			cpu_relax();
+	}
+
+	done = 1;
+}
+#endif
+
+void __init setup_arch(char **cmdline_p)
+{
+	enable_mmu();
+
+	ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
+
+	printk(KERN_NOTICE "Boot params:\n"
+			   "... MOUNT_ROOT_RDONLY - %08lx\n"
+			   "... RAMDISK_FLAGS     - %08lx\n"
+			   "... ORIG_ROOT_DEV     - %08lx\n"
+			   "... LOADER_TYPE       - %08lx\n"
+			   "... INITRD_START      - %08lx\n"
+			   "... INITRD_SIZE       - %08lx\n",
+			   MOUNT_ROOT_RDONLY, RAMDISK_FLAGS,
+			   ORIG_ROOT_DEV, LOADER_TYPE,
+			   INITRD_START, INITRD_SIZE);
+
+#ifdef CONFIG_BLK_DEV_RAM
+	rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
+	rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
+	rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
+#endif
+
+	if (!MOUNT_ROOT_RDONLY)
+		root_mountflags &= ~MS_RDONLY;
+	init_mm.start_code = (unsigned long) _text;
+	init_mm.end_code = (unsigned long) _etext;
+	init_mm.end_data = (unsigned long) _edata;
+	init_mm.brk = (unsigned long) _end;
+
+	code_resource.start = virt_to_phys(_text);
+	code_resource.end = virt_to_phys(_etext)-1;
+	data_resource.start = virt_to_phys(_etext);
+	data_resource.end = virt_to_phys(_edata)-1;
+	bss_resource.start = virt_to_phys(__bss_start);
+	bss_resource.end = virt_to_phys(__bss_stop)-1;
+
+#ifdef CONFIG_CMDLINE_OVERWRITE
+	strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
+#else
+	strlcpy(command_line, COMMAND_LINE, sizeof(command_line));
+#ifdef CONFIG_CMDLINE_EXTEND
+	strlcat(command_line, " ", sizeof(command_line));
+	strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line));
+#endif
+#endif
+
+	/* Save unparsed command line copy for /proc/cmdline */
+	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+	*cmdline_p = command_line;
+
+	parse_early_param();
+
+	plat_early_device_setup();
+
+	sh_mv_setup();
+
+	/* Let earlyprintk output early console messages */
+	early_platform_driver_probe("earlyprintk", 1, 1);
+
+	paging_init();
+
+#ifdef CONFIG_DUMMY_CONSOLE
+	conswitchp = &dummy_con;
+#endif
+
+	/* Perform the machine specific initialisation */
+	if (likely(sh_mv.mv_setup))
+		sh_mv.mv_setup(cmdline_p);
+
+	plat_smp_setup();
+}
+
+/* processor boot mode configuration */
+int generic_mode_pins(void)
+{
+	pr_warning("generic_mode_pins(): missing mode pin configuration\n");
+	return 0;
+}
+
+int test_mode_pin(int pin)
+{
+	return sh_mv.mv_mode_pins() & pin;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/sh_bios.c b/src/kernel/linux/v4.14/arch/sh/kernel/sh_bios.c
new file mode 100644
index 0000000..fe584e5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/sh_bios.c
@@ -0,0 +1,172 @@
+/*
+ *  C interface for trapping into the standard LinuxSH BIOS.
+ *
+ *  Copyright (C) 2000 Greg Banks, Mitch Davis
+ *  Copyright (C) 1999, 2000  Niibe Yutaka
+ *  Copyright (C) 2002  M. R. Brown
+ *  Copyright (C) 2004 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <asm/sh_bios.h>
+
+#define BIOS_CALL_CONSOLE_WRITE		0
+#define BIOS_CALL_ETH_NODE_ADDR		10
+#define BIOS_CALL_SHUTDOWN		11
+#define BIOS_CALL_GDB_DETACH		0xff
+
+void *gdb_vbr_vector = NULL;
+
+static inline long sh_bios_call(long func, long arg0, long arg1, long arg2,
+				    long arg3)
+{
+	register long r0 __asm__("r0") = func;
+	register long r4 __asm__("r4") = arg0;
+	register long r5 __asm__("r5") = arg1;
+	register long r6 __asm__("r6") = arg2;
+	register long r7 __asm__("r7") = arg3;
+
+	if (!gdb_vbr_vector)
+		return -ENOSYS;
+
+	__asm__ __volatile__("trapa	#0x3f":"=z"(r0)
+			     :"0"(r0), "r"(r4), "r"(r5), "r"(r6), "r"(r7)
+			     :"memory");
+	return r0;
+}
+
+void sh_bios_console_write(const char *buf, unsigned int len)
+{
+	sh_bios_call(BIOS_CALL_CONSOLE_WRITE, (long)buf, (long)len, 0, 0);
+}
+
+void sh_bios_gdb_detach(void)
+{
+	sh_bios_call(BIOS_CALL_GDB_DETACH, 0, 0, 0, 0);
+}
+EXPORT_SYMBOL_GPL(sh_bios_gdb_detach);
+
+void sh_bios_get_node_addr(unsigned char *node_addr)
+{
+	sh_bios_call(BIOS_CALL_ETH_NODE_ADDR, 0, (long)node_addr, 0, 0);
+}
+EXPORT_SYMBOL_GPL(sh_bios_get_node_addr);
+
+void sh_bios_shutdown(unsigned int how)
+{
+	sh_bios_call(BIOS_CALL_SHUTDOWN, how, 0, 0, 0);
+}
+
+/*
+ * Read the old value of the VBR register to initialise the vector
+ * through which debug and BIOS traps are delegated by the Linux trap
+ * handler.
+ */
+void sh_bios_vbr_init(void)
+{
+	unsigned long vbr;
+
+	if (unlikely(gdb_vbr_vector))
+		return;
+
+	__asm__ __volatile__ ("stc vbr, %0" : "=r" (vbr));
+
+	if (vbr) {
+		gdb_vbr_vector = (void *)(vbr + 0x100);
+		printk(KERN_NOTICE "Setting GDB trap vector to %p\n",
+		       gdb_vbr_vector);
+	} else
+		printk(KERN_NOTICE "SH-BIOS not detected\n");
+}
+
+/**
+ * sh_bios_vbr_reload - Re-load the system VBR from the BIOS vector.
+ *
+ * This can be used by save/restore code to reinitialize the system VBR
+ * from the fixed BIOS VBR. A no-op if no BIOS VBR is known.
+ */
+void sh_bios_vbr_reload(void)
+{
+	if (gdb_vbr_vector)
+		__asm__ __volatile__ (
+			"ldc %0, vbr"
+			:
+			: "r" (((unsigned long) gdb_vbr_vector) - 0x100)
+			: "memory"
+		);
+}
+
+#ifdef CONFIG_EARLY_PRINTK
+/*
+ *	Print a string through the BIOS
+ */
+static void sh_console_write(struct console *co, const char *s,
+				 unsigned count)
+{
+	sh_bios_console_write(s, count);
+}
+
+/*
+ *	Setup initial baud/bits/parity. We do two things here:
+ *	- construct a cflag setting for the first rs_open()
+ *	- initialize the serial port
+ *	Return non-zero if we didn't find a serial port.
+ */
+static int __init sh_console_setup(struct console *co, char *options)
+{
+	int	cflag = CREAD | HUPCL | CLOCAL;
+
+	/*
+	 *	Now construct a cflag setting.
+	 *	TODO: this is a totally bogus cflag, as we have
+	 *	no idea what serial settings the BIOS is using, or
+	 *	even if its using the serial port at all.
+	 */
+	cflag |= B115200 | CS8 | /*no parity*/0;
+
+	co->cflag = cflag;
+
+	return 0;
+}
+
+static struct console bios_console = {
+	.name		= "bios",
+	.write		= sh_console_write,
+	.setup		= sh_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+};
+
+static int __init setup_early_printk(char *buf)
+{
+	int keep_early = 0;
+
+	if (!buf)
+		return 0;
+
+	if (strstr(buf, "keep"))
+		keep_early = 1;
+
+	if (!strncmp(buf, "bios", 4))
+		early_console = &bios_console;
+
+	if (likely(early_console)) {
+		if (keep_early)
+			early_console->flags &= ~CON_BOOT;
+		else
+			early_console->flags |= CON_BOOT;
+		register_console(early_console);
+	}
+
+	return 0;
+}
+early_param("earlyprintk", setup_early_printk);
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/sh_ksyms_32.c b/src/kernel/linux/v4.14/arch/sh/kernel/sh_ksyms_32.c
new file mode 100644
index 0000000..2827744
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/sh_ksyms_32.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <asm/checksum.h>
+#include <asm/sections.h>
+
+EXPORT_SYMBOL(memchr);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(__copy_user);
+EXPORT_SYMBOL(__udelay);
+EXPORT_SYMBOL(__ndelay);
+EXPORT_SYMBOL(__const_udelay);
+EXPORT_SYMBOL(strlen);
+EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_generic);
+EXPORT_SYMBOL(copy_page);
+EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(empty_zero_page);
+#ifdef CONFIG_FLATMEM
+/* need in pfn_valid macro */
+EXPORT_SYMBOL(min_low_pfn);
+EXPORT_SYMBOL(max_low_pfn);
+#endif
+
+#define DECLARE_EXPORT(name)		\
+	extern void name(void);EXPORT_SYMBOL(name)
+
+DECLARE_EXPORT(__udivsi3);
+DECLARE_EXPORT(__sdivsi3);
+DECLARE_EXPORT(__lshrsi3);
+DECLARE_EXPORT(__ashrsi3);
+DECLARE_EXPORT(__ashlsi3);
+DECLARE_EXPORT(__lshrsi3_r0);
+DECLARE_EXPORT(__ashrsi3_r0);
+DECLARE_EXPORT(__ashlsi3_r0);
+DECLARE_EXPORT(__ashiftrt_r4_6);
+DECLARE_EXPORT(__ashiftrt_r4_7);
+DECLARE_EXPORT(__ashiftrt_r4_8);
+DECLARE_EXPORT(__ashiftrt_r4_9);
+DECLARE_EXPORT(__ashiftrt_r4_10);
+DECLARE_EXPORT(__ashiftrt_r4_11);
+DECLARE_EXPORT(__ashiftrt_r4_12);
+DECLARE_EXPORT(__ashiftrt_r4_13);
+DECLARE_EXPORT(__ashiftrt_r4_14);
+DECLARE_EXPORT(__ashiftrt_r4_15);
+DECLARE_EXPORT(__ashiftrt_r4_20);
+DECLARE_EXPORT(__ashiftrt_r4_21);
+DECLARE_EXPORT(__ashiftrt_r4_22);
+DECLARE_EXPORT(__ashiftrt_r4_23);
+DECLARE_EXPORT(__ashiftrt_r4_24);
+DECLARE_EXPORT(__ashiftrt_r4_27);
+DECLARE_EXPORT(__ashiftrt_r4_30);
+DECLARE_EXPORT(__movstr);
+DECLARE_EXPORT(__movstrSI8);
+DECLARE_EXPORT(__movstrSI12);
+DECLARE_EXPORT(__movstrSI16);
+DECLARE_EXPORT(__movstrSI20);
+DECLARE_EXPORT(__movstrSI24);
+DECLARE_EXPORT(__movstrSI28);
+DECLARE_EXPORT(__movstrSI32);
+DECLARE_EXPORT(__movstrSI36);
+DECLARE_EXPORT(__movstrSI40);
+DECLARE_EXPORT(__movstrSI44);
+DECLARE_EXPORT(__movstrSI48);
+DECLARE_EXPORT(__movstrSI52);
+DECLARE_EXPORT(__movstrSI56);
+DECLARE_EXPORT(__movstrSI60);
+DECLARE_EXPORT(__movstr_i4_even);
+DECLARE_EXPORT(__movstr_i4_odd);
+DECLARE_EXPORT(__movstrSI12_i4);
+DECLARE_EXPORT(__movmem);
+DECLARE_EXPORT(__movmemSI8);
+DECLARE_EXPORT(__movmemSI12);
+DECLARE_EXPORT(__movmemSI16);
+DECLARE_EXPORT(__movmemSI20);
+DECLARE_EXPORT(__movmemSI24);
+DECLARE_EXPORT(__movmemSI28);
+DECLARE_EXPORT(__movmemSI32);
+DECLARE_EXPORT(__movmemSI36);
+DECLARE_EXPORT(__movmemSI40);
+DECLARE_EXPORT(__movmemSI44);
+DECLARE_EXPORT(__movmemSI48);
+DECLARE_EXPORT(__movmemSI52);
+DECLARE_EXPORT(__movmemSI56);
+DECLARE_EXPORT(__movmemSI60);
+DECLARE_EXPORT(__movmem_i4_even);
+DECLARE_EXPORT(__movmem_i4_odd);
+DECLARE_EXPORT(__movmemSI12_i4);
+DECLARE_EXPORT(__udiv_qrnnd_16);
+DECLARE_EXPORT(__sdivsi3_i4);
+DECLARE_EXPORT(__udivsi3_i4);
+DECLARE_EXPORT(__sdivsi3_i4i);
+DECLARE_EXPORT(__udivsi3_i4i);
+#ifdef CONFIG_MCOUNT
+DECLARE_EXPORT(mcount);
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/sh_ksyms_64.c b/src/kernel/linux/v4.14/arch/sh/kernel/sh_ksyms_64.c
new file mode 100644
index 0000000..6ee3740
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/sh_ksyms_64.c
@@ -0,0 +1,54 @@
+/*
+ * arch/sh/kernel/sh_ksyms_64.c
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/rwsem.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/user.h>
+#include <linux/elfcore.h>
+#include <linux/sched.h>
+#include <linux/in6.h>
+#include <linux/interrupt.h>
+#include <linux/screen_info.h>
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <linux/uaccess.h>
+#include <asm/checksum.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/irq.h>
+
+EXPORT_SYMBOL(__put_user_asm_b);
+EXPORT_SYMBOL(__put_user_asm_w);
+EXPORT_SYMBOL(__put_user_asm_l);
+EXPORT_SYMBOL(__put_user_asm_q);
+EXPORT_SYMBOL(__get_user_asm_b);
+EXPORT_SYMBOL(__get_user_asm_w);
+EXPORT_SYMBOL(__get_user_asm_l);
+EXPORT_SYMBOL(__get_user_asm_q);
+EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(copy_page);
+EXPORT_SYMBOL(__copy_user);
+EXPORT_SYMBOL(empty_zero_page);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(__udelay);
+EXPORT_SYMBOL(__ndelay);
+EXPORT_SYMBOL(__const_udelay);
+EXPORT_SYMBOL(strlen);
+EXPORT_SYMBOL(strcpy);
+
+/* Ugh.  These come in from libgcc.a at link time. */
+#define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name)
+
+DECLARE_EXPORT(__sdivsi3);
+DECLARE_EXPORT(__sdivsi3_1);
+DECLARE_EXPORT(__sdivsi3_2);
+DECLARE_EXPORT(__udivsi3);
+DECLARE_EXPORT(__div_table);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/signal_32.c b/src/kernel/linux/v4.14/arch/sh/kernel/signal_32.c
new file mode 100644
index 0000000..c46c002
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/signal_32.c
@@ -0,0 +1,510 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  linux/arch/sh/kernel/signal.c
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *
+ *  1997-11-28  Modified for POSIX.1b signals by Richard Henderson
+ *
+ *  SuperH version:  Copyright (C) 1999, 2000  Niibe Yutaka & Kaz Kojima
+ *
+ */
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/tty.h>
+#include <linux/elf.h>
+#include <linux/personality.h>
+#include <linux/binfmts.h>
+#include <linux/io.h>
+#include <linux/tracehook.h>
+#include <asm/ucontext.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/cacheflush.h>
+#include <asm/syscalls.h>
+#include <asm/fpu.h>
+
+struct fdpic_func_descriptor {
+	unsigned long	text;
+	unsigned long	GOT;
+};
+
+/*
+ * The following define adds a 64 byte gap between the signal
+ * stack frame and previous contents of the stack.  This allows
+ * frame unwinding in a function epilogue but only if a frame
+ * pointer is used in the function.  This is necessary because
+ * current gcc compilers (<4.3) do not generate unwind info on
+ * SH for function epilogues.
+ */
+#define UNWINDGUARD 64
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+
+#define MOVW(n)	 (0x9300|((n)-2))	/* Move mem word at PC+n to R3 */
+#if defined(CONFIG_CPU_SH2)
+#define TRAP_NOARG 0xc320		/* Syscall w/no args (NR in R3) */
+#else
+#define TRAP_NOARG 0xc310		/* Syscall w/no args (NR in R3) */
+#endif
+#define OR_R0_R0 0x200b			/* or r0,r0 (insert to avoid hardware bug) */
+
+struct sigframe
+{
+	struct sigcontext sc;
+	unsigned long extramask[_NSIG_WORDS-1];
+	u16 retcode[8];
+};
+
+struct rt_sigframe
+{
+	struct siginfo info;
+	struct ucontext uc;
+	u16 retcode[8];
+};
+
+#ifdef CONFIG_SH_FPU
+static inline int restore_sigcontext_fpu(struct sigcontext __user *sc)
+{
+	struct task_struct *tsk = current;
+
+	if (!(boot_cpu_data.flags & CPU_HAS_FPU))
+		return 0;
+
+	set_used_math();
+	return __copy_from_user(&tsk->thread.xstate->hardfpu, &sc->sc_fpregs[0],
+				sizeof(long)*(16*2+2));
+}
+
+static inline int save_sigcontext_fpu(struct sigcontext __user *sc,
+				      struct pt_regs *regs)
+{
+	struct task_struct *tsk = current;
+
+	if (!(boot_cpu_data.flags & CPU_HAS_FPU))
+		return 0;
+
+	if (!used_math())
+		return __put_user(0, &sc->sc_ownedfp);
+
+	if (__put_user(1, &sc->sc_ownedfp))
+		return -EFAULT;
+
+	/* This will cause a "finit" to be triggered by the next
+	   attempted FPU operation by the 'current' process.
+	   */
+	clear_used_math();
+
+	unlazy_fpu(tsk, regs);
+	return __copy_to_user(&sc->sc_fpregs[0], &tsk->thread.xstate->hardfpu,
+			      sizeof(long)*(16*2+2));
+}
+#endif /* CONFIG_SH_FPU */
+
+static int
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p)
+{
+	unsigned int err = 0;
+
+#define COPY(x)		err |= __get_user(regs->x, &sc->sc_##x)
+			COPY(regs[1]);
+	COPY(regs[2]);	COPY(regs[3]);
+	COPY(regs[4]);	COPY(regs[5]);
+	COPY(regs[6]);	COPY(regs[7]);
+	COPY(regs[8]);	COPY(regs[9]);
+	COPY(regs[10]);	COPY(regs[11]);
+	COPY(regs[12]);	COPY(regs[13]);
+	COPY(regs[14]);	COPY(regs[15]);
+	COPY(gbr);	COPY(mach);
+	COPY(macl);	COPY(pr);
+	COPY(sr);	COPY(pc);
+#undef COPY
+
+#ifdef CONFIG_SH_FPU
+	if (boot_cpu_data.flags & CPU_HAS_FPU) {
+		int owned_fp;
+		struct task_struct *tsk = current;
+
+		regs->sr |= SR_FD; /* Release FPU */
+		clear_fpu(tsk, regs);
+		clear_used_math();
+		err |= __get_user (owned_fp, &sc->sc_ownedfp);
+		if (owned_fp)
+			err |= restore_sigcontext_fpu(sc);
+	}
+#endif
+
+	regs->tra = -1;		/* disable syscall checks */
+	err |= __get_user(*r0_p, &sc->sc_regs[0]);
+	return err;
+}
+
+asmlinkage int sys_sigreturn(void)
+{
+	struct pt_regs *regs = current_pt_regs();
+	struct sigframe __user *frame = (struct sigframe __user *)regs->regs[15];
+	sigset_t set;
+	int r0;
+
+        /* Always make any pending restarted system calls return -EINTR */
+	current->restart_block.fn = do_no_restart_syscall;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+
+	if (__get_user(set.sig[0], &frame->sc.oldmask)
+	    || (_NSIG_WORDS > 1
+		&& __copy_from_user(&set.sig[1], &frame->extramask,
+				    sizeof(frame->extramask))))
+		goto badframe;
+
+	set_current_blocked(&set);
+
+	if (restore_sigcontext(regs, &frame->sc, &r0))
+		goto badframe;
+	return r0;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+asmlinkage int sys_rt_sigreturn(void)
+{
+	struct pt_regs *regs = current_pt_regs();
+	struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->regs[15];
+	sigset_t set;
+	int r0;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current->restart_block.fn = do_no_restart_syscall;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	set_current_blocked(&set);
+
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+		goto badframe;
+
+	if (restore_altstack(&frame->uc.uc_stack))
+		goto badframe;
+
+	return r0;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+/*
+ * Set up a signal frame.
+ */
+
+static int
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
+		 unsigned long mask)
+{
+	int err = 0;
+
+#define COPY(x)		err |= __put_user(regs->x, &sc->sc_##x)
+	COPY(regs[0]);	COPY(regs[1]);
+	COPY(regs[2]);	COPY(regs[3]);
+	COPY(regs[4]);	COPY(regs[5]);
+	COPY(regs[6]);	COPY(regs[7]);
+	COPY(regs[8]);	COPY(regs[9]);
+	COPY(regs[10]);	COPY(regs[11]);
+	COPY(regs[12]);	COPY(regs[13]);
+	COPY(regs[14]);	COPY(regs[15]);
+	COPY(gbr);	COPY(mach);
+	COPY(macl);	COPY(pr);
+	COPY(sr);	COPY(pc);
+#undef COPY
+
+#ifdef CONFIG_SH_FPU
+	err |= save_sigcontext_fpu(sc, regs);
+#endif
+
+	/* non-iBCS2 extensions.. */
+	err |= __put_user(mask, &sc->oldmask);
+
+	return err;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void __user *
+get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
+{
+	if (ka->sa.sa_flags & SA_ONSTACK) {
+		if (sas_ss_flags(sp) == 0)
+			sp = current->sas_ss_sp + current->sas_ss_size;
+	}
+
+	return (void __user *)((sp - (frame_size+UNWINDGUARD)) & -8ul);
+}
+
+/* These symbols are defined with the addresses in the vsyscall page.
+   See vsyscall-trapa.S.  */
+extern void __kernel_sigreturn(void);
+extern void __kernel_rt_sigreturn(void);
+
+static int setup_frame(struct ksignal *ksig, sigset_t *set,
+		       struct pt_regs *regs)
+{
+	struct sigframe __user *frame;
+	int err = 0, sig = ksig->sig;
+
+	frame = get_sigframe(&ksig->ka, regs->regs[15], sizeof(*frame));
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		return -EFAULT;
+
+	err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
+
+	if (_NSIG_WORDS > 1)
+		err |= __copy_to_user(frame->extramask, &set->sig[1],
+				      sizeof(frame->extramask));
+
+	/* Set up to return from userspace.  If provided, use a stub
+	   already in userspace.  */
+	if (ksig->ka.sa.sa_flags & SA_RESTORER) {
+		regs->pr = (unsigned long) ksig->ka.sa.sa_restorer;
+#ifdef CONFIG_VSYSCALL
+	} else if (likely(current->mm->context.vdso)) {
+		regs->pr = VDSO_SYM(&__kernel_sigreturn);
+#endif
+	} else {
+		/* Generate return code (system call to sigreturn) */
+		err |= __put_user(MOVW(7), &frame->retcode[0]);
+		err |= __put_user(TRAP_NOARG, &frame->retcode[1]);
+		err |= __put_user(OR_R0_R0, &frame->retcode[2]);
+		err |= __put_user(OR_R0_R0, &frame->retcode[3]);
+		err |= __put_user(OR_R0_R0, &frame->retcode[4]);
+		err |= __put_user(OR_R0_R0, &frame->retcode[5]);
+		err |= __put_user(OR_R0_R0, &frame->retcode[6]);
+		err |= __put_user((__NR_sigreturn), &frame->retcode[7]);
+		regs->pr = (unsigned long) frame->retcode;
+		flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
+	}
+
+	if (err)
+		return -EFAULT;
+
+	/* Set up registers for signal handler */
+	regs->regs[15] = (unsigned long) frame;
+	regs->regs[4] = sig; /* Arg for signal handler */
+	regs->regs[5] = 0;
+	regs->regs[6] = (unsigned long) &frame->sc;
+
+	if (current->personality & FDPIC_FUNCPTRS) {
+		struct fdpic_func_descriptor __user *funcptr =
+			(struct fdpic_func_descriptor __user *)ksig->ka.sa.sa_handler;
+
+		err |= __get_user(regs->pc, &funcptr->text);
+		err |= __get_user(regs->regs[12], &funcptr->GOT);
+	} else
+		regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
+
+	if (err)
+		return -EFAULT;
+
+	pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
+		 current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
+
+	return 0;
+}
+
+static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
+			  struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame;
+	int err = 0, sig = ksig->sig;
+
+	frame = get_sigframe(&ksig->ka, regs->regs[15], sizeof(*frame));
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		return -EFAULT;
+
+	err |= copy_siginfo_to_user(&frame->info, &ksig->info);
+
+	/* Create the ucontext.  */
+	err |= __put_user(0, &frame->uc.uc_flags);
+	err |= __put_user(NULL, &frame->uc.uc_link);
+	err |= __save_altstack(&frame->uc.uc_stack, regs->regs[15]);
+	err |= setup_sigcontext(&frame->uc.uc_mcontext,
+			        regs, set->sig[0]);
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+	/* Set up to return from userspace.  If provided, use a stub
+	   already in userspace.  */
+	if (ksig->ka.sa.sa_flags & SA_RESTORER) {
+		regs->pr = (unsigned long) ksig->ka.sa.sa_restorer;
+#ifdef CONFIG_VSYSCALL
+	} else if (likely(current->mm->context.vdso)) {
+		regs->pr = VDSO_SYM(&__kernel_rt_sigreturn);
+#endif
+	} else {
+		/* Generate return code (system call to rt_sigreturn) */
+		err |= __put_user(MOVW(7), &frame->retcode[0]);
+		err |= __put_user(TRAP_NOARG, &frame->retcode[1]);
+		err |= __put_user(OR_R0_R0, &frame->retcode[2]);
+		err |= __put_user(OR_R0_R0, &frame->retcode[3]);
+		err |= __put_user(OR_R0_R0, &frame->retcode[4]);
+		err |= __put_user(OR_R0_R0, &frame->retcode[5]);
+		err |= __put_user(OR_R0_R0, &frame->retcode[6]);
+		err |= __put_user((__NR_rt_sigreturn), &frame->retcode[7]);
+		regs->pr = (unsigned long) frame->retcode;
+		flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
+	}
+
+	if (err)
+		return -EFAULT;
+
+	/* Set up registers for signal handler */
+	regs->regs[15] = (unsigned long) frame;
+	regs->regs[4] = sig; /* Arg for signal handler */
+	regs->regs[5] = (unsigned long) &frame->info;
+	regs->regs[6] = (unsigned long) &frame->uc;
+
+	if (current->personality & FDPIC_FUNCPTRS) {
+		struct fdpic_func_descriptor __user *funcptr =
+			(struct fdpic_func_descriptor __user *)ksig->ka.sa.sa_handler;
+
+		err |= __get_user(regs->pc, &funcptr->text);
+		err |= __get_user(regs->regs[12], &funcptr->GOT);
+	} else
+		regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
+
+	if (err)
+		return -EFAULT;
+
+	pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
+		 current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
+
+	return 0;
+}
+
+static inline void
+handle_syscall_restart(unsigned long save_r0, struct pt_regs *regs,
+		       struct sigaction *sa)
+{
+	/* If we're not from a syscall, bail out */
+	if (regs->tra < 0)
+		return;
+
+	/* check for system call restart.. */
+	switch (regs->regs[0]) {
+		case -ERESTART_RESTARTBLOCK:
+		case -ERESTARTNOHAND:
+		no_system_call_restart:
+			regs->regs[0] = -EINTR;
+			break;
+
+		case -ERESTARTSYS:
+			if (!(sa->sa_flags & SA_RESTART))
+				goto no_system_call_restart;
+		/* fallthrough */
+		case -ERESTARTNOINTR:
+			regs->regs[0] = save_r0;
+			regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
+			break;
+	}
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+static void
+handle_signal(struct ksignal *ksig, struct pt_regs *regs, unsigned int save_r0)
+{
+	sigset_t *oldset = sigmask_to_save();
+	int ret;
+
+	/* Set up the stack frame */
+	if (ksig->ka.sa.sa_flags & SA_SIGINFO)
+		ret = setup_rt_frame(ksig, oldset, regs);
+	else
+		ret = setup_frame(ksig, oldset, regs);
+
+	signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ */
+static void do_signal(struct pt_regs *regs, unsigned int save_r0)
+{
+	struct ksignal ksig;
+
+	/*
+	 * We want the common case to go fast, which
+	 * is why we may in certain cases get here from
+	 * kernel mode. Just return without doing anything
+	 * if so.
+	 */
+	if (!user_mode(regs))
+		return;
+
+	if (get_signal(&ksig)) {
+		handle_syscall_restart(save_r0, regs, &ksig.ka.sa);
+
+		/* Whee!  Actually deliver the signal.  */
+		handle_signal(&ksig, regs, save_r0);
+		return;
+	}
+
+	/* Did we come from a system call? */
+	if (regs->tra >= 0) {
+		/* Restart the system call - no handlers present */
+		if (regs->regs[0] == -ERESTARTNOHAND ||
+		    regs->regs[0] == -ERESTARTSYS ||
+		    regs->regs[0] == -ERESTARTNOINTR) {
+			regs->regs[0] = save_r0;
+			regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
+		} else if (regs->regs[0] == -ERESTART_RESTARTBLOCK) {
+			regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
+			regs->regs[3] = __NR_restart_syscall;
+		}
+	}
+
+	/*
+	 * If there's no signal to deliver, we just put the saved sigmask
+	 * back.
+	 */
+	restore_saved_sigmask();
+}
+
+asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
+				 unsigned long thread_info_flags)
+{
+	/* deal with pending signal delivery */
+	if (thread_info_flags & _TIF_SIGPENDING)
+		do_signal(regs, save_r0);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/signal_64.c b/src/kernel/linux/v4.14/arch/sh/kernel/signal_64.c
new file mode 100644
index 0000000..7b77f18
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/signal_64.c
@@ -0,0 +1,570 @@
+/*
+ * arch/sh/kernel/signal_64.c
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003 - 2008  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/personality.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/tracehook.h>
+#include <asm/ucontext.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/cacheflush.h>
+#include <asm/fpu.h>
+
+#define REG_RET 9
+#define REG_ARG1 2
+#define REG_ARG2 3
+#define REG_ARG3 4
+#define REG_SP 15
+#define REG_PR 18
+#define REF_REG_RET regs->regs[REG_RET]
+#define REF_REG_SP regs->regs[REG_SP]
+#define DEREF_REG_PR regs->regs[REG_PR]
+
+#define DEBUG_SIG 0
+
+static void
+handle_signal(struct ksignal *ksig, struct pt_regs *regs);
+
+static inline void
+handle_syscall_restart(struct pt_regs *regs, struct sigaction *sa)
+{
+	/* If we're not from a syscall, bail out */
+	if (regs->syscall_nr < 0)
+		return;
+
+	/* check for system call restart.. */
+	switch (regs->regs[REG_RET]) {
+		case -ERESTART_RESTARTBLOCK:
+		case -ERESTARTNOHAND:
+		no_system_call_restart:
+			regs->regs[REG_RET] = -EINTR;
+			break;
+
+		case -ERESTARTSYS:
+			if (!(sa->sa_flags & SA_RESTART))
+				goto no_system_call_restart;
+		/* fallthrough */
+		case -ERESTARTNOINTR:
+			/* Decode syscall # */
+			regs->regs[REG_RET] = regs->syscall_nr;
+			regs->pc -= 4;
+			break;
+	}
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ */
+static void do_signal(struct pt_regs *regs)
+{
+	struct ksignal ksig;
+
+	/*
+	 * We want the common case to go fast, which
+	 * is why we may in certain cases get here from
+	 * kernel mode. Just return without doing anything
+	 * if so.
+	 */
+	if (!user_mode(regs))
+		return;
+
+	if (get_signal(&ksig)) {
+		handle_syscall_restart(regs, &ksig.ka.sa);
+
+		/* Whee!  Actually deliver the signal.  */
+		handle_signal(&ksig, regs);
+		return;
+	}
+
+	/* Did we come from a system call? */
+	if (regs->syscall_nr >= 0) {
+		/* Restart the system call - no handlers present */
+		switch (regs->regs[REG_RET]) {
+		case -ERESTARTNOHAND:
+		case -ERESTARTSYS:
+		case -ERESTARTNOINTR:
+			/* Decode Syscall # */
+			regs->regs[REG_RET] = regs->syscall_nr;
+			regs->pc -= 4;
+			break;
+
+		case -ERESTART_RESTARTBLOCK:
+			regs->regs[REG_RET] = __NR_restart_syscall;
+			regs->pc -= 4;
+			break;
+		}
+	}
+
+	/* No signal to deliver -- put the saved sigmask back */
+	restore_saved_sigmask();
+}
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+struct sigframe {
+	struct sigcontext sc;
+	unsigned long extramask[_NSIG_WORDS-1];
+	long long retcode[2];
+};
+
+struct rt_sigframe {
+	struct siginfo __user *pinfo;
+	void *puc;
+	struct siginfo info;
+	struct ucontext uc;
+	long long retcode[2];
+};
+
+#ifdef CONFIG_SH_FPU
+static inline int
+restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+	int err = 0;
+	int fpvalid;
+
+	err |= __get_user (fpvalid, &sc->sc_fpvalid);
+	conditional_used_math(fpvalid);
+	if (! fpvalid)
+		return err;
+
+	if (current == last_task_used_math) {
+		last_task_used_math = NULL;
+		regs->sr |= SR_FD;
+	}
+
+	err |= __copy_from_user(&current->thread.xstate->hardfpu, &sc->sc_fpregs[0],
+				(sizeof(long long) * 32) + (sizeof(int) * 1));
+
+	return err;
+}
+
+static inline int
+setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+	int err = 0;
+	int fpvalid;
+
+	fpvalid = !!used_math();
+	err |= __put_user(fpvalid, &sc->sc_fpvalid);
+	if (! fpvalid)
+		return err;
+
+	if (current == last_task_used_math) {
+		enable_fpu();
+		save_fpu(current);
+		disable_fpu();
+		last_task_used_math = NULL;
+		regs->sr |= SR_FD;
+	}
+
+	err |= __copy_to_user(&sc->sc_fpregs[0], &current->thread.xstate->hardfpu,
+			      (sizeof(long long) * 32) + (sizeof(int) * 1));
+	clear_used_math();
+
+	return err;
+}
+#else
+static inline int
+restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+	return 0;
+}
+static inline int
+setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+	return 0;
+}
+#endif
+
+static int
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, long long *r2_p)
+{
+	unsigned int err = 0;
+        unsigned long long current_sr, new_sr;
+#define SR_MASK 0xffff8cfd
+
+#define COPY(x)		err |= __get_user(regs->x, &sc->sc_##x)
+
+	COPY(regs[0]);	COPY(regs[1]);	COPY(regs[2]);	COPY(regs[3]);
+	COPY(regs[4]);	COPY(regs[5]);	COPY(regs[6]);	COPY(regs[7]);
+	COPY(regs[8]);	COPY(regs[9]);  COPY(regs[10]);	COPY(regs[11]);
+	COPY(regs[12]);	COPY(regs[13]);	COPY(regs[14]);	COPY(regs[15]);
+	COPY(regs[16]);	COPY(regs[17]);	COPY(regs[18]);	COPY(regs[19]);
+	COPY(regs[20]);	COPY(regs[21]);	COPY(regs[22]);	COPY(regs[23]);
+	COPY(regs[24]);	COPY(regs[25]);	COPY(regs[26]);	COPY(regs[27]);
+	COPY(regs[28]);	COPY(regs[29]);	COPY(regs[30]);	COPY(regs[31]);
+	COPY(regs[32]);	COPY(regs[33]);	COPY(regs[34]);	COPY(regs[35]);
+	COPY(regs[36]);	COPY(regs[37]);	COPY(regs[38]);	COPY(regs[39]);
+	COPY(regs[40]);	COPY(regs[41]);	COPY(regs[42]);	COPY(regs[43]);
+	COPY(regs[44]);	COPY(regs[45]);	COPY(regs[46]);	COPY(regs[47]);
+	COPY(regs[48]);	COPY(regs[49]);	COPY(regs[50]);	COPY(regs[51]);
+	COPY(regs[52]);	COPY(regs[53]);	COPY(regs[54]);	COPY(regs[55]);
+	COPY(regs[56]);	COPY(regs[57]);	COPY(regs[58]);	COPY(regs[59]);
+	COPY(regs[60]);	COPY(regs[61]);	COPY(regs[62]);
+	COPY(tregs[0]);	COPY(tregs[1]);	COPY(tregs[2]);	COPY(tregs[3]);
+	COPY(tregs[4]);	COPY(tregs[5]);	COPY(tregs[6]);	COPY(tregs[7]);
+
+        /* Prevent the signal handler manipulating SR in a way that can
+           crash the kernel. i.e. only allow S, Q, M, PR, SZ, FR to be
+           modified */
+        current_sr = regs->sr;
+        err |= __get_user(new_sr, &sc->sc_sr);
+        regs->sr &= SR_MASK;
+        regs->sr |= (new_sr & ~SR_MASK);
+
+	COPY(pc);
+
+#undef COPY
+
+	/* Must do this last in case it sets regs->sr.fd (i.e. after rest of sr
+	 * has been restored above.) */
+	err |= restore_sigcontext_fpu(regs, sc);
+
+	regs->syscall_nr = -1;		/* disable syscall checks */
+	err |= __get_user(*r2_p, &sc->sc_regs[REG_RET]);
+	return err;
+}
+
+asmlinkage int sys_sigreturn(unsigned long r2, unsigned long r3,
+				   unsigned long r4, unsigned long r5,
+				   unsigned long r6, unsigned long r7,
+				   struct pt_regs * regs)
+{
+	struct sigframe __user *frame = (struct sigframe __user *) (long) REF_REG_SP;
+	sigset_t set;
+	long long ret;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current->restart_block.fn = do_no_restart_syscall;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+
+	if (__get_user(set.sig[0], &frame->sc.oldmask)
+	    || (_NSIG_WORDS > 1
+		&& __copy_from_user(&set.sig[1], &frame->extramask,
+				    sizeof(frame->extramask))))
+		goto badframe;
+
+	set_current_blocked(&set);
+
+	if (restore_sigcontext(regs, &frame->sc, &ret))
+		goto badframe;
+	regs->pc -= 4;
+
+	return (int) ret;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+asmlinkage int sys_rt_sigreturn(unsigned long r2, unsigned long r3,
+				unsigned long r4, unsigned long r5,
+				unsigned long r6, unsigned long r7,
+				struct pt_regs * regs)
+{
+	struct rt_sigframe __user *frame = (struct rt_sigframe __user *) (long) REF_REG_SP;
+	sigset_t set;
+	long long ret;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current->restart_block.fn = do_no_restart_syscall;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	set_current_blocked(&set);
+
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ret))
+		goto badframe;
+	regs->pc -= 4;
+
+	if (restore_altstack(&frame->uc.uc_stack))
+		goto badframe;
+
+	return (int) ret;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+/*
+ * Set up a signal frame.
+ */
+static int
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
+		 unsigned long mask)
+{
+	int err = 0;
+
+	/* Do this first, otherwise is this sets sr->fd, that value isn't preserved. */
+	err |= setup_sigcontext_fpu(regs, sc);
+
+#define COPY(x)		err |= __put_user(regs->x, &sc->sc_##x)
+
+	COPY(regs[0]);	COPY(regs[1]);	COPY(regs[2]);	COPY(regs[3]);
+	COPY(regs[4]);	COPY(regs[5]);	COPY(regs[6]);	COPY(regs[7]);
+	COPY(regs[8]);	COPY(regs[9]);	COPY(regs[10]);	COPY(regs[11]);
+	COPY(regs[12]);	COPY(regs[13]);	COPY(regs[14]);	COPY(regs[15]);
+	COPY(regs[16]);	COPY(regs[17]);	COPY(regs[18]);	COPY(regs[19]);
+	COPY(regs[20]);	COPY(regs[21]);	COPY(regs[22]);	COPY(regs[23]);
+	COPY(regs[24]);	COPY(regs[25]);	COPY(regs[26]);	COPY(regs[27]);
+	COPY(regs[28]);	COPY(regs[29]);	COPY(regs[30]);	COPY(regs[31]);
+	COPY(regs[32]);	COPY(regs[33]);	COPY(regs[34]);	COPY(regs[35]);
+	COPY(regs[36]);	COPY(regs[37]);	COPY(regs[38]);	COPY(regs[39]);
+	COPY(regs[40]);	COPY(regs[41]);	COPY(regs[42]);	COPY(regs[43]);
+	COPY(regs[44]);	COPY(regs[45]);	COPY(regs[46]);	COPY(regs[47]);
+	COPY(regs[48]);	COPY(regs[49]);	COPY(regs[50]);	COPY(regs[51]);
+	COPY(regs[52]);	COPY(regs[53]);	COPY(regs[54]);	COPY(regs[55]);
+	COPY(regs[56]);	COPY(regs[57]);	COPY(regs[58]);	COPY(regs[59]);
+	COPY(regs[60]);	COPY(regs[61]);	COPY(regs[62]);
+	COPY(tregs[0]);	COPY(tregs[1]);	COPY(tregs[2]);	COPY(tregs[3]);
+	COPY(tregs[4]);	COPY(tregs[5]);	COPY(tregs[6]);	COPY(tregs[7]);
+	COPY(sr);	COPY(pc);
+
+#undef COPY
+
+	err |= __put_user(mask, &sc->oldmask);
+
+	return err;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void __user *
+get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
+{
+	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp))
+		sp = current->sas_ss_sp + current->sas_ss_size;
+
+	return (void __user *)((sp - frame_size) & -8ul);
+}
+
+void sa_default_restorer(void);		/* See comments below */
+void sa_default_rt_restorer(void);	/* See comments below */
+
+static int setup_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
+{
+	struct sigframe __user *frame;
+	int err = 0, sig = ksig->sig;
+	int signal;
+
+	frame = get_sigframe(&ksig->ka, regs->regs[REG_SP], sizeof(*frame));
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		return -EFAULT;
+
+	err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
+
+	/* Give up earlier as i386, in case */
+	if (err)
+		return -EFAULT;
+
+	if (_NSIG_WORDS > 1) {
+		err |= __copy_to_user(frame->extramask, &set->sig[1],
+				      sizeof(frame->extramask)); }
+
+	/* Give up earlier as i386, in case */
+	if (err)
+		return -EFAULT;
+
+	/* Set up to return from userspace.  If provided, use a stub
+	   already in userspace.  */
+	if (ksig->ka.sa.sa_flags & SA_RESTORER) {
+		/*
+		 * On SH5 all edited pointers are subject to NEFF
+		 */
+		DEREF_REG_PR = neff_sign_extend((unsigned long)
+			ksig->ka->sa.sa_restorer | 0x1);
+	} else {
+		/*
+		 * Different approach on SH5.
+	         * . Endianness independent asm code gets placed in entry.S .
+		 *   This is limited to four ASM instructions corresponding
+		 *   to two long longs in size.
+		 * . err checking is done on the else branch only
+		 * . flush_icache_range() is called upon __put_user() only
+		 * . all edited pointers are subject to NEFF
+		 * . being code, linker turns ShMedia bit on, always
+		 *   dereference index -1.
+		 */
+		DEREF_REG_PR = neff_sign_extend((unsigned long)
+			frame->retcode | 0x01);
+
+		if (__copy_to_user(frame->retcode,
+			(void *)((unsigned long)sa_default_restorer & (~1)), 16) != 0)
+			return -EFAULT;
+
+		/* Cohere the trampoline with the I-cache. */
+		flush_cache_sigtramp(DEREF_REG_PR-1);
+	}
+
+	/*
+	 * Set up registers for signal handler.
+	 * All edited pointers are subject to NEFF.
+	 */
+	regs->regs[REG_SP] = neff_sign_extend((unsigned long)frame);
+	regs->regs[REG_ARG1] = sig; /* Arg for signal handler */
+
+        /* FIXME:
+           The glibc profiling support for SH-5 needs to be passed a sigcontext
+           so it can retrieve the PC.  At some point during 2003 the glibc
+           support was changed to receive the sigcontext through the 2nd
+           argument, but there are still versions of libc.so in use that use
+           the 3rd argument.  Until libc.so is stabilised, pass the sigcontext
+           through both 2nd and 3rd arguments.
+        */
+
+	regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->sc;
+	regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->sc;
+
+	regs->pc = neff_sign_extend((unsigned long)ksig->ka.sa.sa_handler);
+
+	/* Broken %016Lx */
+	pr_debug("SIG deliver (#%d,%s:%d): sp=%p pc=%08Lx%08Lx link=%08Lx%08Lx\n",
+		 sig, current->comm, current->pid, frame,
+		 regs->pc >> 32, regs->pc & 0xffffffff,
+		 DEREF_REG_PR >> 32, DEREF_REG_PR & 0xffffffff);
+
+	return 0;
+}
+
+static int setup_rt_frame(struct ksignal *kig, sigset_t *set,
+			  struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame;
+	int err = 0, sig = ksig->sig;
+
+	frame = get_sigframe(&ksig->ka, regs->regs[REG_SP], sizeof(*frame));
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		return -EFAULT;
+
+	err |= __put_user(&frame->info, &frame->pinfo);
+	err |= __put_user(&frame->uc, &frame->puc);
+	err |= copy_siginfo_to_user(&frame->info, &ksig->info);
+
+	/* Give up earlier as i386, in case */
+	if (err)
+		return -EFAULT;
+
+	/* Create the ucontext.  */
+	err |= __put_user(0, &frame->uc.uc_flags);
+	err |= __put_user(0, &frame->uc.uc_link);
+	err |= __save_altstack(&frame->uc.uc_stack, regs->regs[REG_SP]);
+	err |= setup_sigcontext(&frame->uc.uc_mcontext,
+			        regs, set->sig[0]);
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+	/* Give up earlier as i386, in case */
+	if (err)
+		return -EFAULT;
+
+	/* Set up to return from userspace.  If provided, use a stub
+	   already in userspace.  */
+	if (ksig->ka.sa.sa_flags & SA_RESTORER) {
+		/*
+		 * On SH5 all edited pointers are subject to NEFF
+		 */
+		DEREF_REG_PR = neff_sign_extend((unsigned long)
+			ksig->ka.sa.sa_restorer | 0x1);
+	} else {
+		/*
+		 * Different approach on SH5.
+	         * . Endianness independent asm code gets placed in entry.S .
+		 *   This is limited to four ASM instructions corresponding
+		 *   to two long longs in size.
+		 * . err checking is done on the else branch only
+		 * . flush_icache_range() is called upon __put_user() only
+		 * . all edited pointers are subject to NEFF
+		 * . being code, linker turns ShMedia bit on, always
+		 *   dereference index -1.
+		 */
+		DEREF_REG_PR = neff_sign_extend((unsigned long)
+			frame->retcode | 0x01);
+
+		if (__copy_to_user(frame->retcode,
+			(void *)((unsigned long)sa_default_rt_restorer & (~1)), 16) != 0)
+			return -EFAULT;
+
+		/* Cohere the trampoline with the I-cache. */
+		flush_icache_range(DEREF_REG_PR-1, DEREF_REG_PR-1+15);
+	}
+
+	/*
+	 * Set up registers for signal handler.
+	 * All edited pointers are subject to NEFF.
+	 */
+	regs->regs[REG_SP] = neff_sign_extend((unsigned long)frame);
+	regs->regs[REG_ARG1] = sig; /* Arg for signal handler */
+	regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->info;
+	regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->uc.uc_mcontext;
+	regs->pc = neff_sign_extend((unsigned long)ksig->ka.sa.sa_handler);
+
+	pr_debug("SIG deliver (#%d,%s:%d): sp=%p pc=%08Lx%08Lx link=%08Lx%08Lx\n",
+		 sig, current->comm, current->pid, frame,
+		 regs->pc >> 32, regs->pc & 0xffffffff,
+		 DEREF_REG_PR >> 32, DEREF_REG_PR & 0xffffffff);
+
+	return 0;
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+static void
+handle_signal(struct ksignal *ksig, struct pt_regs *regs)
+{
+	sigset_t *oldset = sigmask_to_save();
+	int ret;
+
+	/* Set up the stack frame */
+	if (ksig->ka.sa.sa_flags & SA_SIGINFO)
+		ret = setup_rt_frame(ksig, oldset, regs);
+	else
+		ret = setup_frame(ksig, oldset, regs);
+
+	signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
+}
+
+asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
+{
+	if (thread_info_flags & _TIF_SIGPENDING)
+		do_signal(regs);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/smp.c b/src/kernel/linux/v4.14/arch/sh/kernel/smp.c
new file mode 100644
index 0000000..c483422
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/smp.c
@@ -0,0 +1,476 @@
+/*
+ * arch/sh/kernel/smp.c
+ *
+ * SMP support for the SuperH processors.
+ *
+ * Copyright (C) 2002 - 2010 Paul Mundt
+ * Copyright (C) 2006 - 2007 Akio Idehara
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/err.h>
+#include <linux/cache.h>
+#include <linux/cpumask.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/cpu.h>
+#include <linux/interrupt.h>
+#include <linux/sched/mm.h>
+#include <linux/sched/hotplug.h>
+#include <linux/atomic.h>
+#include <linux/clockchips.h>
+#include <asm/processor.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+
+int __cpu_number_map[NR_CPUS];		/* Map physical to logical */
+int __cpu_logical_map[NR_CPUS];		/* Map logical to physical */
+
+struct plat_smp_ops *mp_ops = NULL;
+
+/* State of each CPU */
+DEFINE_PER_CPU(int, cpu_state) = { 0 };
+
+void register_smp_ops(struct plat_smp_ops *ops)
+{
+	if (mp_ops)
+		printk(KERN_WARNING "Overriding previously set SMP ops\n");
+
+	mp_ops = ops;
+}
+
+static inline void smp_store_cpu_info(unsigned int cpu)
+{
+	struct sh_cpuinfo *c = cpu_data + cpu;
+
+	memcpy(c, &boot_cpu_data, sizeof(struct sh_cpuinfo));
+
+	c->loops_per_jiffy = loops_per_jiffy;
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int cpu = smp_processor_id();
+
+	init_new_context(current, &init_mm);
+	current_thread_info()->cpu = cpu;
+	mp_ops->prepare_cpus(max_cpus);
+
+#ifndef CONFIG_HOTPLUG_CPU
+	init_cpu_present(cpu_possible_mask);
+#endif
+}
+
+void __init smp_prepare_boot_cpu(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	__cpu_number_map[0] = cpu;
+	__cpu_logical_map[0] = cpu;
+
+	set_cpu_online(cpu, true);
+	set_cpu_possible(cpu, true);
+
+	per_cpu(cpu_state, cpu) = CPU_ONLINE;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+void native_cpu_die(unsigned int cpu)
+{
+	unsigned int i;
+
+	for (i = 0; i < 10; i++) {
+		smp_rmb();
+		if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
+			if (system_state == SYSTEM_RUNNING)
+				pr_info("CPU %u is now offline\n", cpu);
+
+			return;
+		}
+
+		msleep(100);
+	}
+
+	pr_err("CPU %u didn't die...\n", cpu);
+}
+
+int native_cpu_disable(unsigned int cpu)
+{
+	return cpu == 0 ? -EPERM : 0;
+}
+
+void play_dead_common(void)
+{
+	idle_task_exit();
+	irq_ctx_exit(raw_smp_processor_id());
+	mb();
+
+	__this_cpu_write(cpu_state, CPU_DEAD);
+	local_irq_disable();
+}
+
+void native_play_dead(void)
+{
+	play_dead_common();
+}
+
+int __cpu_disable(void)
+{
+	unsigned int cpu = smp_processor_id();
+	int ret;
+
+	ret = mp_ops->cpu_disable(cpu);
+	if (ret)
+		return ret;
+
+	/*
+	 * Take this CPU offline.  Once we clear this, we can't return,
+	 * and we must not schedule until we're ready to give up the cpu.
+	 */
+	set_cpu_online(cpu, false);
+
+	/*
+	 * OK - migrate IRQs away from this CPU
+	 */
+	migrate_irqs();
+
+	/*
+	 * Flush user cache and TLB mappings, and then remove this CPU
+	 * from the vm mask set of all processes.
+	 */
+	flush_cache_all();
+#ifdef CONFIG_MMU
+	local_flush_tlb_all();
+#endif
+
+	clear_tasks_mm_cpumask(cpu);
+
+	return 0;
+}
+#else /* ... !CONFIG_HOTPLUG_CPU */
+int native_cpu_disable(unsigned int cpu)
+{
+	return -ENOSYS;
+}
+
+void native_cpu_die(unsigned int cpu)
+{
+	/* We said "no" in __cpu_disable */
+	BUG();
+}
+
+void native_play_dead(void)
+{
+	BUG();
+}
+#endif
+
+asmlinkage void start_secondary(void)
+{
+	unsigned int cpu = smp_processor_id();
+	struct mm_struct *mm = &init_mm;
+
+	enable_mmu();
+	mmgrab(mm);
+	mmget(mm);
+	current->active_mm = mm;
+#ifdef CONFIG_MMU
+	enter_lazy_tlb(mm, current);
+	local_flush_tlb_all();
+#endif
+
+	per_cpu_trap_init();
+
+	preempt_disable();
+
+	notify_cpu_starting(cpu);
+
+	local_irq_enable();
+
+	calibrate_delay();
+
+	smp_store_cpu_info(cpu);
+
+	set_cpu_online(cpu, true);
+	per_cpu(cpu_state, cpu) = CPU_ONLINE;
+
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+}
+
+extern struct {
+	unsigned long sp;
+	unsigned long bss_start;
+	unsigned long bss_end;
+	void *start_kernel_fn;
+	void *cpu_init_fn;
+	void *thread_info;
+} stack_start;
+
+int __cpu_up(unsigned int cpu, struct task_struct *tsk)
+{
+	unsigned long timeout;
+
+	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
+
+	/* Fill in data in head.S for secondary cpus */
+	stack_start.sp = tsk->thread.sp;
+	stack_start.thread_info = tsk->stack;
+	stack_start.bss_start = 0; /* don't clear bss for secondary cpus */
+	stack_start.start_kernel_fn = start_secondary;
+
+	flush_icache_range((unsigned long)&stack_start,
+			   (unsigned long)&stack_start + sizeof(stack_start));
+	wmb();
+
+	mp_ops->start_cpu(cpu, (unsigned long)_stext);
+
+	timeout = jiffies + HZ;
+	while (time_before(jiffies, timeout)) {
+		if (cpu_online(cpu))
+			break;
+
+		udelay(10);
+		barrier();
+	}
+
+	if (cpu_online(cpu))
+		return 0;
+
+	return -ENOENT;
+}
+
+void __init smp_cpus_done(unsigned int max_cpus)
+{
+	unsigned long bogosum = 0;
+	int cpu;
+
+	for_each_online_cpu(cpu)
+		bogosum += cpu_data[cpu].loops_per_jiffy;
+
+	printk(KERN_INFO "SMP: Total of %d processors activated "
+	       "(%lu.%02lu BogoMIPS).\n", num_online_cpus(),
+	       bogosum / (500000/HZ),
+	       (bogosum / (5000/HZ)) % 100);
+}
+
+void smp_send_reschedule(int cpu)
+{
+	mp_ops->send_ipi(cpu, SMP_MSG_RESCHEDULE);
+}
+
+void smp_send_stop(void)
+{
+	smp_call_function(stop_this_cpu, 0, 0);
+}
+
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
+{
+	int cpu;
+
+	for_each_cpu(cpu, mask)
+		mp_ops->send_ipi(cpu, SMP_MSG_FUNCTION);
+}
+
+void arch_send_call_function_single_ipi(int cpu)
+{
+	mp_ops->send_ipi(cpu, SMP_MSG_FUNCTION_SINGLE);
+}
+
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+void tick_broadcast(const struct cpumask *mask)
+{
+	int cpu;
+
+	for_each_cpu(cpu, mask)
+		mp_ops->send_ipi(cpu, SMP_MSG_TIMER);
+}
+
+static void ipi_timer(void)
+{
+	irq_enter();
+	tick_receive_broadcast();
+	irq_exit();
+}
+#endif
+
+void smp_message_recv(unsigned int msg)
+{
+	switch (msg) {
+	case SMP_MSG_FUNCTION:
+		generic_smp_call_function_interrupt();
+		break;
+	case SMP_MSG_RESCHEDULE:
+		scheduler_ipi();
+		break;
+	case SMP_MSG_FUNCTION_SINGLE:
+		generic_smp_call_function_single_interrupt();
+		break;
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+	case SMP_MSG_TIMER:
+		ipi_timer();
+		break;
+#endif
+	default:
+		printk(KERN_WARNING "SMP %d: %s(): unknown IPI %d\n",
+		       smp_processor_id(), __func__, msg);
+		break;
+	}
+}
+
+/* Not really SMP stuff ... */
+int setup_profiling_timer(unsigned int multiplier)
+{
+	return 0;
+}
+
+#ifdef CONFIG_MMU
+
+static void flush_tlb_all_ipi(void *info)
+{
+	local_flush_tlb_all();
+}
+
+void flush_tlb_all(void)
+{
+	on_each_cpu(flush_tlb_all_ipi, 0, 1);
+}
+
+static void flush_tlb_mm_ipi(void *mm)
+{
+	local_flush_tlb_mm((struct mm_struct *)mm);
+}
+
+/*
+ * The following tlb flush calls are invoked when old translations are
+ * being torn down, or pte attributes are changing. For single threaded
+ * address spaces, a new context is obtained on the current cpu, and tlb
+ * context on other cpus are invalidated to force a new context allocation
+ * at switch_mm time, should the mm ever be used on other cpus. For
+ * multithreaded address spaces, intercpu interrupts have to be sent.
+ * Another case where intercpu interrupts are required is when the target
+ * mm might be active on another cpu (eg debuggers doing the flushes on
+ * behalf of debugees, kswapd stealing pages from another process etc).
+ * Kanoj 07/00.
+ */
+void flush_tlb_mm(struct mm_struct *mm)
+{
+	preempt_disable();
+
+	if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) {
+		smp_call_function(flush_tlb_mm_ipi, (void *)mm, 1);
+	} else {
+		int i;
+		for_each_online_cpu(i)
+			if (smp_processor_id() != i)
+				cpu_context(i, mm) = 0;
+	}
+	local_flush_tlb_mm(mm);
+
+	preempt_enable();
+}
+
+struct flush_tlb_data {
+	struct vm_area_struct *vma;
+	unsigned long addr1;
+	unsigned long addr2;
+};
+
+static void flush_tlb_range_ipi(void *info)
+{
+	struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
+
+	local_flush_tlb_range(fd->vma, fd->addr1, fd->addr2);
+}
+
+void flush_tlb_range(struct vm_area_struct *vma,
+		     unsigned long start, unsigned long end)
+{
+	struct mm_struct *mm = vma->vm_mm;
+
+	preempt_disable();
+	if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) {
+		struct flush_tlb_data fd;
+
+		fd.vma = vma;
+		fd.addr1 = start;
+		fd.addr2 = end;
+		smp_call_function(flush_tlb_range_ipi, (void *)&fd, 1);
+	} else {
+		int i;
+		for_each_online_cpu(i)
+			if (smp_processor_id() != i)
+				cpu_context(i, mm) = 0;
+	}
+	local_flush_tlb_range(vma, start, end);
+	preempt_enable();
+}
+
+static void flush_tlb_kernel_range_ipi(void *info)
+{
+	struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
+
+	local_flush_tlb_kernel_range(fd->addr1, fd->addr2);
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	struct flush_tlb_data fd;
+
+	fd.addr1 = start;
+	fd.addr2 = end;
+	on_each_cpu(flush_tlb_kernel_range_ipi, (void *)&fd, 1);
+}
+
+static void flush_tlb_page_ipi(void *info)
+{
+	struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
+
+	local_flush_tlb_page(fd->vma, fd->addr1);
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+	preempt_disable();
+	if ((atomic_read(&vma->vm_mm->mm_users) != 1) ||
+	    (current->mm != vma->vm_mm)) {
+		struct flush_tlb_data fd;
+
+		fd.vma = vma;
+		fd.addr1 = page;
+		smp_call_function(flush_tlb_page_ipi, (void *)&fd, 1);
+	} else {
+		int i;
+		for_each_online_cpu(i)
+			if (smp_processor_id() != i)
+				cpu_context(i, vma->vm_mm) = 0;
+	}
+	local_flush_tlb_page(vma, page);
+	preempt_enable();
+}
+
+static void flush_tlb_one_ipi(void *info)
+{
+	struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
+	local_flush_tlb_one(fd->addr1, fd->addr2);
+}
+
+void flush_tlb_one(unsigned long asid, unsigned long vaddr)
+{
+	struct flush_tlb_data fd;
+
+	fd.addr1 = asid;
+	fd.addr2 = vaddr;
+
+	smp_call_function(flush_tlb_one_ipi, (void *)&fd, 1);
+	local_flush_tlb_one(asid, vaddr);
+}
+
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/stacktrace.c b/src/kernel/linux/v4.14/arch/sh/kernel/stacktrace.c
new file mode 100644
index 0000000..7a73d27
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/stacktrace.c
@@ -0,0 +1,93 @@
+/*
+ * arch/sh/kernel/stacktrace.c
+ *
+ * Stack trace management functions
+ *
+ *  Copyright (C) 2006 - 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/stacktrace.h>
+#include <linux/thread_info.h>
+#include <linux/module.h>
+#include <asm/unwinder.h>
+#include <asm/ptrace.h>
+#include <asm/stacktrace.h>
+
+static int save_stack_stack(void *data, char *name)
+{
+	return 0;
+}
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer.
+ */
+static void save_stack_address(void *data, unsigned long addr, int reliable)
+{
+	struct stack_trace *trace = data;
+
+	if (!reliable)
+		return;
+
+	if (trace->skip > 0) {
+		trace->skip--;
+		return;
+	}
+
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = addr;
+}
+
+static const struct stacktrace_ops save_stack_ops = {
+	.stack = save_stack_stack,
+	.address = save_stack_address,
+};
+
+void save_stack_trace(struct stack_trace *trace)
+{
+	unsigned long *sp = (unsigned long *)current_stack_pointer;
+
+	unwind_stack(current, NULL, sp,  &save_stack_ops, trace);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
+
+static void
+save_stack_address_nosched(void *data, unsigned long addr, int reliable)
+{
+	struct stack_trace *trace = (struct stack_trace *)data;
+
+	if (!reliable)
+		return;
+
+	if (in_sched_functions(addr))
+		return;
+
+	if (trace->skip > 0) {
+		trace->skip--;
+		return;
+	}
+
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = addr;
+}
+
+static const struct stacktrace_ops save_stack_ops_nosched = {
+	.stack = save_stack_stack,
+	.address = save_stack_address_nosched,
+};
+
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+	unsigned long *sp = (unsigned long *)tsk->thread.sp;
+
+	unwind_stack(current, NULL, sp,  &save_stack_ops_nosched, trace);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/swsusp.c b/src/kernel/linux/v4.14/arch/sh/kernel/swsusp.c
new file mode 100644
index 0000000..12b64a0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/swsusp.c
@@ -0,0 +1,38 @@
+/*
+ * swsusp.c - SuperH hibernation support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include <asm/sections.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+#include <asm/fpu.h>
+
+struct swsusp_arch_regs swsusp_arch_regs_cpu0;
+
+int pfn_is_nosave(unsigned long pfn)
+{
+	unsigned long begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
+	unsigned long end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT;
+
+	return (pfn >= begin_pfn) && (pfn < end_pfn);
+}
+
+void save_processor_state(void)
+{
+	init_fpu(current);
+}
+
+void restore_processor_state(void)
+{
+	local_flush_tlb_all();
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/sys_sh.c b/src/kernel/linux/v4.14/arch/sh/kernel/sys_sh.c
new file mode 100644
index 0000000..724911c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/sys_sh.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/kernel/sys_sh.c
+ *
+ * This file contains various random system calls that
+ * have a non-standard calling sequence on the Linux/SuperH
+ * platform.
+ *
+ * Taken from i386 version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/syscalls.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+#include <linux/utsname.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/ipc.h>
+#include <asm/syscalls.h>
+#include <linux/uaccess.h>
+#include <asm/unistd.h>
+#include <asm/cacheflush.h>
+#include <asm/cachectl.h>
+
+asmlinkage int old_mmap(unsigned long addr, unsigned long len,
+	unsigned long prot, unsigned long flags,
+	int fd, unsigned long off)
+{
+	if (off & ~PAGE_MASK)
+		return -EINVAL;
+	return sys_mmap_pgoff(addr, len, prot, flags, fd, off>>PAGE_SHIFT);
+}
+
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+	unsigned long prot, unsigned long flags,
+	unsigned long fd, unsigned long pgoff)
+{
+	/*
+	 * The shift for mmap2 is constant, regardless of PAGE_SIZE
+	 * setting.
+	 */
+	if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
+		return -EINVAL;
+
+	pgoff >>= PAGE_SHIFT - 12;
+
+	return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
+}
+
+/* sys_cacheflush -- flush (part of) the processor cache.  */
+asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len, int op)
+{
+	struct vm_area_struct *vma;
+
+	if ((op <= 0) || (op > (CACHEFLUSH_D_PURGE|CACHEFLUSH_I)))
+		return -EINVAL;
+
+	/*
+	 * Verify that the specified address region actually belongs
+	 * to this process.
+	 */
+	if (addr + len < addr)
+		return -EFAULT;
+
+	down_read(&current->mm->mmap_sem);
+	vma = find_vma (current->mm, addr);
+	if (vma == NULL || addr < vma->vm_start || addr + len > vma->vm_end) {
+		up_read(&current->mm->mmap_sem);
+		return -EFAULT;
+	}
+
+	switch (op & CACHEFLUSH_D_PURGE) {
+		case CACHEFLUSH_D_INVAL:
+			__flush_invalidate_region((void *)addr, len);
+			break;
+		case CACHEFLUSH_D_WB:
+			__flush_wback_region((void *)addr, len);
+			break;
+		case CACHEFLUSH_D_PURGE:
+			__flush_purge_region((void *)addr, len);
+			break;
+	}
+
+	if (op & CACHEFLUSH_I)
+		flush_icache_range(addr, addr+len);
+
+	up_read(&current->mm->mmap_sem);
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/sys_sh32.c b/src/kernel/linux/v4.14/arch/sh/kernel/sys_sh32.c
new file mode 100644
index 0000000..f8dc8bf
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/sys_sh32.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/syscalls.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/ipc.h>
+#include <asm/cacheflush.h>
+#include <linux/uaccess.h>
+#include <asm/unistd.h>
+#include <asm/syscalls.h>
+
+/*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way Unix traditionally does this, though.
+ */
+asmlinkage int sys_sh_pipe(void)
+{
+	int fd[2];
+	int error;
+
+	error = do_pipe_flags(fd, 0);
+	if (!error) {
+		current_pt_regs()->regs[1] = fd[1];
+		return fd[0];
+	}
+	return error;
+}
+
+asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char __user *buf,
+			     size_t count, long dummy, loff_t pos)
+{
+	return sys_pread64(fd, buf, count, pos);
+}
+
+asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char __user *buf,
+			      size_t count, long dummy, loff_t pos)
+{
+	return sys_pwrite64(fd, buf, count, pos);
+}
+
+asmlinkage int sys_fadvise64_64_wrapper(int fd, u32 offset0, u32 offset1,
+				u32 len0, u32 len1, int advice)
+{
+#ifdef  __LITTLE_ENDIAN__
+	return sys_fadvise64_64(fd, (u64)offset1 << 32 | offset0,
+				(u64)len1 << 32 | len0,	advice);
+#else
+	return sys_fadvise64_64(fd, (u64)offset0 << 32 | offset1,
+				(u64)len0 << 32 | len1,	advice);
+#endif
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/syscalls_32.S b/src/kernel/linux/v4.14/arch/sh/kernel/syscalls_32.S
new file mode 100644
index 0000000..254bc22
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/syscalls_32.S
@@ -0,0 +1,402 @@
+/*
+ * arch/sh/kernel/syscalls.S
+ *
+ * System call table for SuperH
+ *
+ *  Copyright (C) 1999, 2000, 2002  Niibe Yutaka
+ *  Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+
+	.data
+ENTRY(sys_call_table)
+	.long sys_restart_syscall	/* 0  -  old "setup()" system call*/
+	.long sys_exit
+	.long sys_fork
+	.long sys_read
+	.long sys_write
+	.long sys_open		/* 5 */
+	.long sys_close
+	.long sys_waitpid
+	.long sys_creat
+	.long sys_link
+	.long sys_unlink		/* 10 */
+	.long sys_execve
+	.long sys_chdir
+	.long sys_time
+	.long sys_mknod
+	.long sys_chmod		/* 15 */
+	.long sys_lchown16
+	.long sys_ni_syscall	/* old break syscall holder */
+	.long sys_stat
+	.long sys_lseek
+	.long sys_getpid		/* 20 */
+	.long sys_mount
+	.long sys_oldumount
+	.long sys_setuid16
+	.long sys_getuid16
+	.long sys_stime		/* 25 */
+	.long sys_ptrace
+	.long sys_alarm
+	.long sys_fstat
+	.long sys_pause
+	.long sys_utime		/* 30 */
+	.long sys_ni_syscall	/* old stty syscall holder */
+	.long sys_ni_syscall	/* old gtty syscall holder */
+	.long sys_access
+	.long sys_nice
+	.long sys_ni_syscall	/* 35 */		/* old ftime syscall holder */
+	.long sys_sync
+	.long sys_kill
+	.long sys_rename
+	.long sys_mkdir
+	.long sys_rmdir		/* 40 */
+	.long sys_dup
+	.long sys_sh_pipe
+	.long sys_times
+	.long sys_ni_syscall	/* old prof syscall holder */
+	.long sys_brk		/* 45 */
+	.long sys_setgid16
+	.long sys_getgid16
+	.long sys_signal
+	.long sys_geteuid16
+	.long sys_getegid16	/* 50 */
+	.long sys_acct
+	.long sys_umount		/* recycled never used phys() */
+	.long sys_ni_syscall	/* old lock syscall holder */
+	.long sys_ioctl
+	.long sys_fcntl		/* 55 */
+	.long sys_ni_syscall	/* old mpx syscall holder */
+	.long sys_setpgid
+	.long sys_ni_syscall	/* old ulimit syscall holder */
+	.long sys_ni_syscall	/* sys_olduname */
+	.long sys_umask		/* 60 */
+	.long sys_chroot
+	.long sys_ustat
+	.long sys_dup2
+	.long sys_getppid
+	.long sys_getpgrp		/* 65 */
+	.long sys_setsid
+	.long sys_sigaction
+	.long sys_sgetmask
+	.long sys_ssetmask
+	.long sys_setreuid16	/* 70 */
+	.long sys_setregid16
+	.long sys_sigsuspend
+	.long sys_sigpending
+	.long sys_sethostname
+	.long sys_setrlimit	/* 75 */
+	.long sys_old_getrlimit
+	.long sys_getrusage
+	.long sys_gettimeofday
+	.long sys_settimeofday
+	.long sys_getgroups16	/* 80 */
+	.long sys_setgroups16
+	.long sys_ni_syscall	/* sys_oldselect */
+	.long sys_symlink
+	.long sys_lstat
+	.long sys_readlink		/* 85 */
+	.long sys_uselib
+	.long sys_swapon
+	.long sys_reboot
+	.long sys_old_readdir
+	.long old_mmap		/* 90 */
+	.long sys_munmap
+	.long sys_truncate
+	.long sys_ftruncate
+	.long sys_fchmod
+	.long sys_fchown16		/* 95 */
+	.long sys_getpriority
+	.long sys_setpriority
+	.long sys_ni_syscall	/* old profil syscall holder */
+	.long sys_statfs
+	.long sys_fstatfs		/* 100 */
+	.long sys_ni_syscall	/* ioperm */
+	.long sys_socketcall
+	.long sys_syslog
+	.long sys_setitimer
+	.long sys_getitimer	/* 105 */
+	.long sys_newstat
+	.long sys_newlstat
+	.long sys_newfstat
+	.long sys_uname
+	.long sys_ni_syscall	/* 110 */ /* iopl */
+	.long sys_vhangup
+	.long sys_ni_syscall	/* idle */
+	.long sys_ni_syscall	/* vm86old */
+	.long sys_wait4
+	.long sys_swapoff		/* 115 */
+	.long sys_sysinfo
+	.long sys_ipc
+	.long sys_fsync
+	.long sys_sigreturn
+	.long sys_clone		/* 120 */
+	.long sys_setdomainname
+	.long sys_newuname
+	.long sys_cacheflush	/* x86: sys_modify_ldt */
+	.long sys_adjtimex
+	.long sys_mprotect		/* 125 */
+	.long sys_sigprocmask
+	.long sys_ni_syscall	/* old "create_module" */
+	.long sys_init_module
+	.long sys_delete_module
+	.long sys_ni_syscall	/* 130: old "get_kernel_syms" */
+	.long sys_quotactl
+	.long sys_getpgid
+	.long sys_fchdir
+	.long sys_bdflush
+	.long sys_sysfs		/* 135 */
+	.long sys_personality
+	.long sys_ni_syscall	/* for afs_syscall */
+	.long sys_setfsuid16
+	.long sys_setfsgid16
+	.long sys_llseek		/* 140 */
+	.long sys_getdents
+	.long sys_select
+	.long sys_flock
+	.long sys_msync
+	.long sys_readv		/* 145 */
+	.long sys_writev
+	.long sys_getsid
+	.long sys_fdatasync
+	.long sys_sysctl
+	.long sys_mlock		/* 150 */
+	.long sys_munlock
+	.long sys_mlockall
+	.long sys_munlockall
+	.long sys_sched_setparam
+	.long sys_sched_getparam   /* 155 */
+	.long sys_sched_setscheduler
+	.long sys_sched_getscheduler
+	.long sys_sched_yield
+	.long sys_sched_get_priority_max
+	.long sys_sched_get_priority_min  /* 160 */
+	.long sys_sched_rr_get_interval
+	.long sys_nanosleep
+	.long sys_mremap
+	.long sys_setresuid16
+	.long sys_getresuid16	/* 165 */
+	.long sys_ni_syscall	/* vm86 */
+	.long sys_ni_syscall	/* old "query_module" */
+	.long sys_poll
+	.long sys_ni_syscall	/* was nfsservctl */
+	.long sys_setresgid16	/* 170 */
+	.long sys_getresgid16
+	.long sys_prctl
+	.long sys_rt_sigreturn
+	.long sys_rt_sigaction
+	.long sys_rt_sigprocmask	/* 175 */
+	.long sys_rt_sigpending
+	.long sys_rt_sigtimedwait
+	.long sys_rt_sigqueueinfo
+	.long sys_rt_sigsuspend
+	.long sys_pread_wrapper	   /* 180 */
+	.long sys_pwrite_wrapper
+	.long sys_chown16
+	.long sys_getcwd
+	.long sys_capget
+	.long sys_capset           /* 185 */
+	.long sys_sigaltstack
+	.long sys_sendfile
+	.long sys_ni_syscall	/* getpmsg */
+	.long sys_ni_syscall	/* putpmsg */
+	.long sys_vfork            /* 190 */
+	.long sys_getrlimit
+	.long sys_mmap2
+	.long sys_truncate64
+	.long sys_ftruncate64
+	.long sys_stat64		/* 195 */
+	.long sys_lstat64
+	.long sys_fstat64
+	.long sys_lchown
+	.long sys_getuid
+	.long sys_getgid		/* 200 */
+	.long sys_geteuid
+	.long sys_getegid
+	.long sys_setreuid
+	.long sys_setregid
+	.long sys_getgroups	/* 205 */
+	.long sys_setgroups
+	.long sys_fchown
+	.long sys_setresuid
+	.long sys_getresuid
+	.long sys_setresgid	/* 210 */
+	.long sys_getresgid
+	.long sys_chown
+	.long sys_setuid
+	.long sys_setgid
+	.long sys_setfsuid		/* 215 */
+	.long sys_setfsgid
+	.long sys_pivot_root
+	.long sys_mincore
+	.long sys_madvise
+	.long sys_getdents64	/* 220 */
+	.long sys_fcntl64
+	.long sys_ni_syscall	/* reserved for TUX */
+	.long sys_ni_syscall	/* Reserved for Security */
+	.long sys_gettid
+	.long sys_readahead	/* 225 */
+	.long sys_setxattr
+	.long sys_lsetxattr
+	.long sys_fsetxattr
+	.long sys_getxattr
+	.long sys_lgetxattr	/* 230 */
+	.long sys_fgetxattr
+	.long sys_listxattr
+	.long sys_llistxattr
+	.long sys_flistxattr
+	.long sys_removexattr	/* 235 */
+	.long sys_lremovexattr
+	.long sys_fremovexattr
+	.long sys_tkill
+	.long sys_sendfile64
+	.long sys_futex		/* 240 */
+	.long sys_sched_setaffinity
+	.long sys_sched_getaffinity
+	.long sys_ni_syscall	/* reserved for set_thread_area */
+	.long sys_ni_syscall	/* reserved for get_thread_area */
+	.long sys_io_setup	/* 245 */
+	.long sys_io_destroy
+	.long sys_io_getevents
+	.long sys_io_submit
+	.long sys_io_cancel
+	.long sys_fadvise64	/* 250 */
+	.long sys_ni_syscall
+	.long sys_exit_group
+	.long sys_lookup_dcookie
+	.long sys_epoll_create
+	.long sys_epoll_ctl	/* 255 */
+	.long sys_epoll_wait
+ 	.long sys_remap_file_pages
+ 	.long sys_set_tid_address
+ 	.long sys_timer_create
+ 	.long sys_timer_settime		/* 260 */
+ 	.long sys_timer_gettime
+ 	.long sys_timer_getoverrun
+ 	.long sys_timer_delete
+ 	.long sys_clock_settime
+ 	.long sys_clock_gettime		/* 265 */
+ 	.long sys_clock_getres
+ 	.long sys_clock_nanosleep
+	.long sys_statfs64
+	.long sys_fstatfs64
+	.long sys_tgkill		/* 270 */
+	.long sys_utimes
+ 	.long sys_fadvise64_64_wrapper
+	.long sys_ni_syscall	/* Reserved for vserver */
+	.long sys_mbind
+	.long sys_get_mempolicy		/* 275 */
+	.long sys_set_mempolicy
+	.long sys_mq_open
+	.long sys_mq_unlink
+	.long sys_mq_timedsend
+	.long sys_mq_timedreceive       /* 280 */
+	.long sys_mq_notify
+	.long sys_mq_getsetattr
+	.long sys_kexec_load
+	.long sys_waitid
+	.long sys_add_key		/* 285 */
+	.long sys_request_key
+	.long sys_keyctl
+	.long sys_ioprio_set
+	.long sys_ioprio_get
+	.long sys_inotify_init		/* 290 */
+	.long sys_inotify_add_watch
+	.long sys_inotify_rm_watch
+	.long sys_ni_syscall
+	.long sys_migrate_pages
+	.long sys_openat		/* 295 */
+	.long sys_mkdirat
+	.long sys_mknodat
+	.long sys_fchownat
+	.long sys_futimesat
+	.long sys_fstatat64		/* 300 */
+	.long sys_unlinkat
+	.long sys_renameat
+	.long sys_linkat
+	.long sys_symlinkat
+	.long sys_readlinkat		/* 305 */
+	.long sys_fchmodat
+	.long sys_faccessat
+	.long sys_pselect6
+	.long sys_ppoll
+	.long sys_unshare		/* 310 */
+	.long sys_set_robust_list
+	.long sys_get_robust_list
+	.long sys_splice
+	.long sys_sync_file_range
+	.long sys_tee			/* 315 */
+	.long sys_vmsplice
+	.long sys_move_pages
+	.long sys_getcpu
+	.long sys_epoll_pwait
+	.long sys_utimensat		/* 320 */
+	.long sys_signalfd
+	.long sys_timerfd_create
+	.long sys_eventfd
+	.long sys_fallocate
+	.long sys_timerfd_settime	/* 325 */
+	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
+	.long sys_rt_tgsigqueueinfo	/* 335 */
+	.long sys_perf_event_open
+	.long sys_fanotify_init
+	.long sys_fanotify_mark
+	.long sys_prlimit64
+	/* Broken-out socket family */
+	.long sys_socket		/* 340 */
+	.long sys_bind
+	.long sys_connect
+	.long sys_listen
+	.long sys_accept
+	.long sys_getsockname	/* 345 */
+	.long sys_getpeername
+	.long sys_socketpair
+	.long sys_send
+	.long sys_sendto
+	.long sys_recv			/* 350 */
+	.long sys_recvfrom
+	.long sys_shutdown
+	.long sys_setsockopt
+	.long sys_getsockopt
+	.long sys_sendmsg		/* 355 */
+	.long sys_recvmsg
+	.long sys_recvmmsg
+	.long sys_accept4
+	.long sys_name_to_handle_at
+	.long sys_open_by_handle_at	/* 360 */
+	.long sys_clock_adjtime
+	.long sys_syncfs
+	.long sys_sendmmsg
+	.long sys_setns
+	.long sys_process_vm_readv	/* 365 */
+	.long sys_process_vm_writev
+	.long sys_kcmp
+	.long sys_finit_module
+	.long sys_sched_getattr
+	.long sys_sched_setattr		/* 370 */
+	.long sys_renameat2
+	.long sys_seccomp
+	.long sys_getrandom
+	.long sys_memfd_create
+	.long sys_bpf			/* 375 */
+	.long sys_execveat
+	.long sys_userfaultfd
+	.long sys_membarrier
+	.long sys_mlock2
+	.long sys_copy_file_range	/* 380 */
+	.long sys_preadv2
+	.long sys_pwritev2
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/syscalls_64.S b/src/kernel/linux/v4.14/arch/sh/kernel/syscalls_64.S
new file mode 100644
index 0000000..d6a27f7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/syscalls_64.S
@@ -0,0 +1,422 @@
+/*
+ * arch/sh/kernel/syscalls_64.S
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2004 - 2007  Paul Mundt
+ * Copyright (C) 2003, 2004 Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+
+	.section .data, "aw"
+	.balign 32
+
+/*
+ * System calls jump table
+ */
+	.globl  sys_call_table
+sys_call_table:
+	.long sys_restart_syscall	/* 0  -  old "setup()" system call  */
+	.long sys_exit
+	.long sys_fork
+	.long sys_read
+	.long sys_write
+	.long sys_open			/* 5 */
+	.long sys_close
+	.long sys_waitpid
+	.long sys_creat
+	.long sys_link
+	.long sys_unlink		/* 10 */
+	.long sys_execve
+	.long sys_chdir
+	.long sys_time
+	.long sys_mknod
+	.long sys_chmod			/* 15 */
+	.long sys_lchown16
+	.long sys_ni_syscall	/* old break syscall holder */
+	.long sys_stat
+	.long sys_lseek
+	.long sys_getpid		/* 20 */
+	.long sys_mount
+	.long sys_oldumount
+	.long sys_setuid16
+	.long sys_getuid16
+	.long sys_stime			/* 25 */
+	.long sh64_ptrace
+	.long sys_alarm
+	.long sys_fstat
+	.long sys_pause
+	.long sys_utime			/* 30 */
+	.long sys_ni_syscall	/* old stty syscall holder */
+	.long sys_ni_syscall	/* old gtty syscall holder */
+	.long sys_access
+	.long sys_nice
+	.long sys_ni_syscall		/* 35 */ /* old ftime syscall holder */
+	.long sys_sync
+	.long sys_kill
+	.long sys_rename
+	.long sys_mkdir
+	.long sys_rmdir			/* 40 */
+	.long sys_dup
+	.long sys_pipe
+	.long sys_times
+	.long sys_ni_syscall	/* old prof syscall holder */
+	.long sys_brk			/* 45 */
+	.long sys_setgid16
+	.long sys_getgid16
+	.long sys_signal
+	.long sys_geteuid16
+	.long sys_getegid16		/* 50 */
+	.long sys_acct
+	.long sys_umount		/* recycled never used phys( */
+	.long sys_ni_syscall	/* old lock syscall holder */
+	.long sys_ioctl
+	.long sys_fcntl			/* 55 */
+	.long sys_ni_syscall	/* old mpx syscall holder */
+	.long sys_setpgid
+	.long sys_ni_syscall	/* old ulimit syscall holder */
+	.long sys_ni_syscall	/* sys_olduname */
+	.long sys_umask			/* 60 */
+	.long sys_chroot
+	.long sys_ustat
+	.long sys_dup2
+	.long sys_getppid
+	.long sys_getpgrp		/* 65 */
+	.long sys_setsid
+	.long sys_sigaction
+	.long sys_sgetmask
+	.long sys_ssetmask
+	.long sys_setreuid16		/* 70 */
+	.long sys_setregid16
+	.long sys_sigsuspend
+	.long sys_sigpending
+	.long sys_sethostname
+	.long sys_setrlimit		/* 75 */
+	.long sys_old_getrlimit
+	.long sys_getrusage
+	.long sys_gettimeofday
+	.long sys_settimeofday
+	.long sys_getgroups16		/* 80 */
+	.long sys_setgroups16
+	.long sys_ni_syscall	/* sys_oldselect */
+	.long sys_symlink
+	.long sys_lstat
+	.long sys_readlink		/* 85 */
+	.long sys_uselib
+	.long sys_swapon
+	.long sys_reboot
+	.long sys_old_readdir
+	.long old_mmap			/* 90 */
+	.long sys_munmap
+	.long sys_truncate
+	.long sys_ftruncate
+	.long sys_fchmod
+	.long sys_fchown16		/* 95 */
+	.long sys_getpriority
+	.long sys_setpriority
+	.long sys_ni_syscall	/* old profil syscall holder */
+	.long sys_statfs
+	.long sys_fstatfs		/* 100 */
+	.long sys_ni_syscall	/* ioperm */
+	.long sys_socketcall	/* Obsolete implementation of socket syscall */
+	.long sys_syslog
+	.long sys_setitimer
+	.long sys_getitimer		/* 105 */
+	.long sys_newstat
+	.long sys_newlstat
+	.long sys_newfstat
+	.long sys_uname
+	.long sys_ni_syscall		/* 110 */ /* iopl */
+	.long sys_vhangup
+	.long sys_ni_syscall	/* idle */
+	.long sys_ni_syscall	/* vm86old */
+	.long sys_wait4
+	.long sys_swapoff		/* 115 */
+	.long sys_sysinfo
+	.long sys_ipc		/* Obsolete ipc syscall implementation */
+	.long sys_fsync
+	.long sys_sigreturn
+	.long sys_clone			/* 120 */
+	.long sys_setdomainname
+	.long sys_newuname
+	.long sys_cacheflush	/* x86: sys_modify_ldt */
+	.long sys_adjtimex
+	.long sys_mprotect		/* 125 */
+	.long sys_sigprocmask
+	.long sys_ni_syscall		/* old "create_module" */
+	.long sys_init_module
+	.long sys_delete_module
+	.long sys_ni_syscall		/* 130: old "get_kernel_syms" */
+	.long sys_quotactl
+	.long sys_getpgid
+	.long sys_fchdir
+	.long sys_bdflush
+	.long sys_sysfs			/* 135 */
+	.long sys_personality
+	.long sys_ni_syscall	/* for afs_syscall */
+	.long sys_setfsuid16
+	.long sys_setfsgid16
+	.long sys_llseek		/* 140 */
+	.long sys_getdents
+	.long sys_select
+	.long sys_flock
+	.long sys_msync
+	.long sys_readv			/* 145 */
+	.long sys_writev
+	.long sys_getsid
+	.long sys_fdatasync
+	.long sys_sysctl
+	.long sys_mlock			/* 150 */
+	.long sys_munlock
+	.long sys_mlockall
+	.long sys_munlockall
+	.long sys_sched_setparam
+	.long sys_sched_getparam	/* 155 */
+	.long sys_sched_setscheduler
+	.long sys_sched_getscheduler
+	.long sys_sched_yield
+	.long sys_sched_get_priority_max
+	.long sys_sched_get_priority_min  /* 160 */
+	.long sys_sched_rr_get_interval
+	.long sys_nanosleep
+	.long sys_mremap
+	.long sys_setresuid16
+	.long sys_getresuid16		/* 165 */
+	.long sys_ni_syscall	/* vm86 */
+	.long sys_ni_syscall	/* old "query_module" */
+	.long sys_poll
+	.long sys_ni_syscall	/* was nfsservctl */
+	.long sys_setresgid16		/* 170 */
+	.long sys_getresgid16
+	.long sys_prctl
+	.long sys_rt_sigreturn
+	.long sys_rt_sigaction
+	.long sys_rt_sigprocmask	/* 175 */
+	.long sys_rt_sigpending
+	.long sys_rt_sigtimedwait
+	.long sys_rt_sigqueueinfo
+	.long sys_rt_sigsuspend
+	.long sys_pread64		/* 180 */
+	.long sys_pwrite64
+	.long sys_chown16
+	.long sys_getcwd
+	.long sys_capget
+	.long sys_capset		/* 185 */
+	.long sys_sigaltstack
+	.long sys_sendfile
+	.long sys_ni_syscall	/* getpmsg */
+	.long sys_ni_syscall	/* putpmsg */
+	.long sys_vfork			/* 190 */
+	.long sys_getrlimit
+	.long sys_mmap2
+	.long sys_truncate64
+	.long sys_ftruncate64
+	.long sys_stat64		/* 195 */
+	.long sys_lstat64
+	.long sys_fstat64
+	.long sys_lchown
+	.long sys_getuid
+	.long sys_getgid		/* 200 */
+	.long sys_geteuid
+	.long sys_getegid
+	.long sys_setreuid
+	.long sys_setregid
+	.long sys_getgroups		/* 205 */
+	.long sys_setgroups
+	.long sys_fchown
+	.long sys_setresuid
+	.long sys_getresuid
+	.long sys_setresgid		/* 210 */
+	.long sys_getresgid
+	.long sys_chown
+	.long sys_setuid
+	.long sys_setgid
+	.long sys_setfsuid		/* 215 */
+	.long sys_setfsgid
+	.long sys_pivot_root
+	.long sys_mincore
+	.long sys_madvise
+	/* Broken-out socket family (maintain backwards compatibility in syscall
+	   numbering with 2.4) */
+	.long sys_socket		/* 220 */
+	.long sys_bind
+	.long sys_connect
+	.long sys_listen
+	.long sys_accept
+	.long sys_getsockname		/* 225 */
+	.long sys_getpeername
+	.long sys_socketpair
+	.long sys_send
+	.long sys_sendto
+	.long sys_recv			/* 230*/
+	.long sys_recvfrom
+	.long sys_shutdown
+	.long sys_setsockopt
+	.long sys_getsockopt
+	.long sys_sendmsg		/* 235 */
+	.long sys_recvmsg
+	/* Broken-out IPC family (maintain backwards compatibility in syscall
+	   numbering with 2.4) */
+	.long sys_semop
+	.long sys_semget
+	.long sys_semctl
+	.long sys_msgsnd		/* 240 */
+	.long sys_msgrcv
+	.long sys_msgget
+	.long sys_msgctl
+	.long sys_shmat
+	.long sys_shmdt			/* 245 */
+	.long sys_shmget
+	.long sys_shmctl
+	/* Rest of syscalls listed in 2.4 i386 unistd.h */
+	.long sys_getdents64
+	.long sys_fcntl64
+	.long sys_ni_syscall		/* 250 reserved for TUX */
+	.long sys_ni_syscall		/* Reserved for Security */
+	.long sys_gettid
+	.long sys_readahead
+	.long sys_setxattr
+	.long sys_lsetxattr		/* 255 */
+	.long sys_fsetxattr
+	.long sys_getxattr
+	.long sys_lgetxattr
+	.long sys_fgetxattr
+	.long sys_listxattr		/* 260 */
+	.long sys_llistxattr
+	.long sys_flistxattr
+	.long sys_removexattr
+	.long sys_lremovexattr
+	.long sys_fremovexattr  	/* 265 */
+	.long sys_tkill
+	.long sys_sendfile64
+	.long sys_futex
+	.long sys_sched_setaffinity
+	.long sys_sched_getaffinity	/* 270 */
+	.long sys_ni_syscall		/* reserved for set_thread_area */
+	.long sys_ni_syscall		/* reserved for get_thread_area */
+	.long sys_io_setup
+	.long sys_io_destroy
+	.long sys_io_getevents		/* 275 */
+	.long sys_io_submit
+	.long sys_io_cancel
+	.long sys_fadvise64
+	.long sys_ni_syscall
+	.long sys_exit_group		/* 280 */
+	/* Rest of new 2.6 syscalls */
+	.long sys_lookup_dcookie
+	.long sys_epoll_create
+	.long sys_epoll_ctl
+	.long sys_epoll_wait
+ 	.long sys_remap_file_pages	/* 285 */
+ 	.long sys_set_tid_address
+ 	.long sys_timer_create
+ 	.long sys_timer_settime
+ 	.long sys_timer_gettime
+ 	.long sys_timer_getoverrun	/* 290 */
+ 	.long sys_timer_delete
+ 	.long sys_clock_settime
+ 	.long sys_clock_gettime
+ 	.long sys_clock_getres
+ 	.long sys_clock_nanosleep	/* 295 */
+	.long sys_statfs64
+	.long sys_fstatfs64
+	.long sys_tgkill
+	.long sys_utimes
+ 	.long sys_fadvise64_64		/* 300 */
+	.long sys_ni_syscall	/* Reserved for vserver */
+	.long sys_ni_syscall	/* Reserved for mbind */
+	.long sys_ni_syscall	/* get_mempolicy */
+	.long sys_ni_syscall	/* set_mempolicy */
+	.long sys_mq_open		/* 305 */
+	.long sys_mq_unlink
+	.long sys_mq_timedsend
+	.long sys_mq_timedreceive
+	.long sys_mq_notify
+	.long sys_mq_getsetattr		/* 310 */
+	.long sys_ni_syscall	/* Reserved for kexec */
+	.long sys_waitid
+	.long sys_add_key
+	.long sys_request_key
+	.long sys_keyctl		/* 315 */
+	.long sys_ioprio_set
+	.long sys_ioprio_get
+	.long sys_inotify_init
+	.long sys_inotify_add_watch
+	.long sys_inotify_rm_watch	/* 320 */
+	.long sys_ni_syscall
+	.long sys_migrate_pages
+	.long sys_openat
+	.long sys_mkdirat
+	.long sys_mknodat		/* 325 */
+	.long sys_fchownat
+	.long sys_futimesat
+	.long sys_fstatat64
+	.long sys_unlinkat
+	.long sys_renameat		/* 330 */
+	.long sys_linkat
+	.long sys_symlinkat
+	.long sys_readlinkat
+	.long sys_fchmodat
+	.long sys_faccessat		/* 335 */
+	.long sys_pselect6
+	.long sys_ppoll
+	.long sys_unshare
+	.long sys_set_robust_list
+	.long sys_get_robust_list	/* 340 */
+	.long sys_splice
+	.long sys_sync_file_range
+	.long sys_tee
+	.long sys_vmsplice
+	.long sys_move_pages		/* 345 */
+	.long sys_getcpu
+	.long sys_epoll_pwait
+	.long sys_utimensat
+	.long sys_signalfd
+	.long sys_timerfd_create	/* 350 */
+	.long sys_eventfd
+	.long sys_fallocate
+	.long sys_timerfd_settime
+	.long sys_timerfd_gettime
+	.long sys_signalfd4		/* 355 */
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1		/* 360 */
+	.long sys_preadv
+	.long sys_pwritev
+	.long sys_rt_tgsigqueueinfo
+	.long sys_perf_event_open
+	.long sys_recvmmsg		/* 365 */
+	.long sys_accept4
+	.long sys_fanotify_init
+	.long sys_fanotify_mark
+	.long sys_prlimit64
+	.long sys_name_to_handle_at	/* 370 */
+	.long sys_open_by_handle_at
+	.long sys_clock_adjtime
+	.long sys_syncfs
+	.long sys_sendmmsg
+	.long sys_setns			/* 375 */
+	.long sys_process_vm_readv
+	.long sys_process_vm_writev
+	.long sys_kcmp
+	.long sys_finit_module
+	.long sys_sched_getattr		/* 380 */
+	.long sys_sched_setattr
+	.long sys_renameat2
+	.long sys_seccomp
+	.long sys_getrandom
+	.long sys_memfd_create		/* 385 */
+	.long sys_bpf
+	.long sys_execveat
+	.long sys_userfaultfd
+	.long sys_membarrier
+	.long sys_mlock2		/* 390 */
+	.long sys_copy_file_range
+	.long sys_preadv2
+	.long sys_pwritev2
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/time.c b/src/kernel/linux/v4.14/arch/sh/kernel/time.c
new file mode 100644
index 0000000..fcd5e41
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/time.c
@@ -0,0 +1,119 @@
+/*
+ *  arch/sh/kernel/time.c
+ *
+ *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
+ *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
+ *  Copyright (C) 2002 - 2009  Paul Mundt
+ *  Copyright (C) 2002  M. R. Brown  <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/profile.h>
+#include <linux/timex.h>
+#include <linux/sched.h>
+#include <linux/clockchips.h>
+#include <linux/platform_device.h>
+#include <linux/smp.h>
+#include <linux/rtc.h>
+#include <asm/clock.h>
+#include <asm/rtc.h>
+
+/* Dummy RTC ops */
+static void null_rtc_get_time(struct timespec *tv)
+{
+	tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
+	tv->tv_nsec = 0;
+}
+
+static int null_rtc_set_time(const time_t secs)
+{
+	return 0;
+}
+
+void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
+int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
+
+void read_persistent_clock(struct timespec *ts)
+{
+	rtc_sh_get_time(ts);
+}
+
+#ifdef CONFIG_GENERIC_CMOS_UPDATE
+int update_persistent_clock(struct timespec now)
+{
+	return rtc_sh_set_time(now.tv_sec);
+}
+#endif
+
+static int rtc_generic_get_time(struct device *dev, struct rtc_time *tm)
+{
+	struct timespec tv;
+
+	rtc_sh_get_time(&tv);
+	rtc_time_to_tm(tv.tv_sec, tm);
+	return 0;
+}
+
+static int rtc_generic_set_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned long secs;
+
+	rtc_tm_to_time(tm, &secs);
+	if ((rtc_sh_set_time == null_rtc_set_time) ||
+	    (rtc_sh_set_time(secs) < 0))
+		return -EOPNOTSUPP;
+
+	return 0;
+}
+
+static const struct rtc_class_ops rtc_generic_ops = {
+	.read_time = rtc_generic_get_time,
+	.set_time = rtc_generic_set_time,
+};
+
+static int __init rtc_generic_init(void)
+{
+	struct platform_device *pdev;
+
+	if (rtc_sh_get_time == null_rtc_get_time)
+		return -ENODEV;
+
+	pdev = platform_device_register_data(NULL, "rtc-generic", -1,
+					     &rtc_generic_ops,
+					     sizeof(rtc_generic_ops));
+
+
+	return PTR_ERR_OR_ZERO(pdev);
+}
+device_initcall(rtc_generic_init);
+
+void (*board_time_init)(void);
+
+static void __init sh_late_time_init(void)
+{
+	/*
+	 * Make sure all compiled-in early timers register themselves.
+	 *
+	 * Run probe() for two "earlytimer" devices, these will be the
+	 * clockevents and clocksource devices respectively. In the event
+	 * that only a clockevents device is available, we -ENODEV on the
+	 * clocksource and the jiffies clocksource is used transparently
+	 * instead. No error handling is necessary here.
+	 */
+	early_platform_driver_register_all("earlytimer");
+	early_platform_driver_probe("earlytimer", 2, 0);
+}
+
+void __init time_init(void)
+{
+	if (board_time_init)
+		board_time_init();
+
+	clk_init();
+
+	late_time_init = sh_late_time_init;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/topology.c b/src/kernel/linux/v4.14/arch/sh/kernel/topology.c
new file mode 100644
index 0000000..c82912a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/topology.c
@@ -0,0 +1,82 @@
+/*
+ * arch/sh/kernel/topology.c
+ *
+ *  Copyright (C) 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/percpu.h>
+#include <linux/topology.h>
+#include <linux/node.h>
+#include <linux/nodemask.h>
+#include <linux/export.h>
+
+static DEFINE_PER_CPU(struct cpu, cpu_devices);
+
+cpumask_t cpu_core_map[NR_CPUS];
+EXPORT_SYMBOL(cpu_core_map);
+
+static cpumask_t cpu_coregroup_map(int cpu)
+{
+	/*
+	 * Presently all SH-X3 SMP cores are multi-cores, so just keep it
+	 * simple until we have a method for determining topology..
+	 */
+	return *cpu_possible_mask;
+}
+
+const struct cpumask *cpu_coregroup_mask(int cpu)
+{
+	return &cpu_core_map[cpu];
+}
+
+int arch_update_cpu_topology(void)
+{
+	unsigned int cpu;
+
+	for_each_possible_cpu(cpu)
+		cpu_core_map[cpu] = cpu_coregroup_map(cpu);
+
+	return 0;
+}
+
+static int __init topology_init(void)
+{
+	int i, ret;
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+	for_each_online_node(i)
+		register_one_node(i);
+#endif
+
+	for_each_present_cpu(i) {
+		struct cpu *c = &per_cpu(cpu_devices, i);
+
+		c->hotpluggable = 1;
+
+		ret = register_cpu(c, i);
+		if (unlikely(ret))
+			printk(KERN_WARNING "%s: register_cpu %d failed (%d)\n",
+			       __func__, i, ret);
+	}
+
+#if defined(CONFIG_NUMA) && !defined(CONFIG_SMP)
+	/*
+	 * In the UP case, make sure the CPU association is still
+	 * registered under each node. Without this, sysfs fails
+	 * to make the connection between nodes other than node0
+	 * and cpu0.
+	 */
+	for_each_online_node(i)
+		if (i != numa_node_id())
+			register_cpu_under_node(raw_smp_processor_id(), i);
+#endif
+
+	return 0;
+}
+subsys_initcall(topology_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/traps.c b/src/kernel/linux/v4.14/arch/sh/kernel/traps.c
new file mode 100644
index 0000000..8b49cce
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/traps.c
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/bug.h>
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/kdebug.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task_stack.h>
+#include <linux/uaccess.h>
+#include <linux/hardirq.h>
+#include <linux/kernel.h>
+#include <linux/kexec.h>
+#include <linux/sched/signal.h>
+
+#include <linux/extable.h>
+#include <linux/module.h>	/* print_modules */
+#include <asm/unwinder.h>
+#include <asm/traps.h>
+
+static DEFINE_SPINLOCK(die_lock);
+
+void die(const char *str, struct pt_regs *regs, long err)
+{
+	static int die_counter;
+
+	oops_enter();
+
+	spin_lock_irq(&die_lock);
+	console_verbose();
+	bust_spinlocks(1);
+
+	printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
+	print_modules();
+	show_regs(regs);
+
+	printk("Process: %s (pid: %d, stack limit = %p)\n", current->comm,
+			task_pid_nr(current), task_stack_page(current) + 1);
+
+	if (!user_mode(regs) || in_interrupt())
+		dump_mem("Stack: ", regs->regs[15], THREAD_SIZE +
+			 (unsigned long)task_stack_page(current));
+
+	notify_die(DIE_OOPS, str, regs, err, 255, SIGSEGV);
+
+	bust_spinlocks(0);
+	add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
+	spin_unlock_irq(&die_lock);
+	oops_exit();
+
+	if (kexec_should_crash(current))
+		crash_kexec(regs);
+
+	if (in_interrupt())
+		panic("Fatal exception in interrupt");
+
+	if (panic_on_oops)
+		panic("Fatal exception");
+
+	do_exit(SIGSEGV);
+}
+
+void die_if_kernel(const char *str, struct pt_regs *regs, long err)
+{
+	if (!user_mode(regs))
+		die(str, regs, err);
+}
+
+/*
+ * try and fix up kernelspace address errors
+ * - userspace errors just cause EFAULT to be returned, resulting in SEGV
+ * - kernel/userspace interfaces cause a jump to an appropriate handler
+ * - other kernel errors are bad
+ */
+void die_if_no_fixup(const char *str, struct pt_regs *regs, long err)
+{
+	if (!user_mode(regs)) {
+		const struct exception_table_entry *fixup;
+		fixup = search_exception_tables(regs->pc);
+		if (fixup) {
+			regs->pc = fixup->fixup;
+			return;
+		}
+
+		die(str, regs, err);
+	}
+}
+
+#ifdef CONFIG_GENERIC_BUG
+static void handle_BUG(struct pt_regs *regs)
+{
+	const struct bug_entry *bug;
+	unsigned long bugaddr = regs->pc;
+	enum bug_trap_type tt;
+
+	if (!is_valid_bugaddr(bugaddr))
+		goto invalid;
+
+	bug = find_bug(bugaddr);
+
+	/* Switch unwinders when unwind_stack() is called */
+	if (bug->flags & BUGFLAG_UNWINDER)
+		unwinder_faulted = 1;
+
+	tt = report_bug(bugaddr, regs);
+	if (tt == BUG_TRAP_TYPE_WARN) {
+		regs->pc += instruction_size(bugaddr);
+		return;
+	}
+
+invalid:
+	die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff);
+}
+
+int is_valid_bugaddr(unsigned long addr)
+{
+	insn_size_t opcode;
+
+	if (addr < PAGE_OFFSET)
+		return 0;
+	if (probe_kernel_address((insn_size_t *)addr, opcode))
+		return 0;
+	if (opcode == TRAPA_BUG_OPCODE)
+		return 1;
+
+	return 0;
+}
+#endif
+
+/*
+ * Generic trap handler.
+ */
+BUILD_TRAP_HANDLER(debug)
+{
+	TRAP_HANDLER_DECL;
+
+	/* Rewind */
+	regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
+
+	if (notify_die(DIE_TRAP, "debug trap", regs, 0, vec & 0xff,
+		       SIGTRAP) == NOTIFY_STOP)
+		return;
+
+	force_sig(SIGTRAP, current);
+}
+
+/*
+ * Special handler for BUG() traps.
+ */
+BUILD_TRAP_HANDLER(bug)
+{
+	TRAP_HANDLER_DECL;
+
+	/* Rewind */
+	regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
+
+	if (notify_die(DIE_TRAP, "bug trap", regs, 0, TRAPA_BUG_OPCODE & 0xff,
+		       SIGTRAP) == NOTIFY_STOP)
+		return;
+
+#ifdef CONFIG_GENERIC_BUG
+	if (__kernel_text_address(instruction_pointer(regs))) {
+		insn_size_t insn = *(insn_size_t *)instruction_pointer(regs);
+		if (insn == TRAPA_BUG_OPCODE)
+			handle_BUG(regs);
+		return;
+	}
+#endif
+
+	force_sig(SIGTRAP, current);
+}
+
+BUILD_TRAP_HANDLER(nmi)
+{
+	unsigned int cpu = smp_processor_id();
+	TRAP_HANDLER_DECL;
+
+	nmi_enter();
+	nmi_count(cpu)++;
+
+	switch (notify_die(DIE_NMI, "NMI", regs, 0, vec & 0xff, SIGINT)) {
+	case NOTIFY_OK:
+	case NOTIFY_STOP:
+		break;
+	case NOTIFY_BAD:
+		die("Fatal Non-Maskable Interrupt", regs, SIGINT);
+	default:
+		printk(KERN_ALERT "Got NMI, but nobody cared. Ignoring...\n");
+		break;
+	}
+
+	nmi_exit();
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/traps_32.c b/src/kernel/linux/v4.14/arch/sh/kernel/traps_32.c
new file mode 100644
index 0000000..b3770bb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/traps_32.c
@@ -0,0 +1,798 @@
+/*
+ * 'traps.c' handles hardware traps and faults after we have saved some
+ * state in 'entry.S'.
+ *
+ *  SuperH version: Copyright (C) 1999 Niibe Yutaka
+ *                  Copyright (C) 2000 Philipp Rumpf
+ *                  Copyright (C) 2000 David Howells
+ *                  Copyright (C) 2002 - 2010 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/kallsyms.h>
+#include <linux/io.h>
+#include <linux/bug.h>
+#include <linux/debug_locks.h>
+#include <linux/kdebug.h>
+#include <linux/limits.h>
+#include <linux/sysfs.h>
+#include <linux/uaccess.h>
+#include <linux/perf_event.h>
+#include <linux/sched/task_stack.h>
+
+#include <asm/alignment.h>
+#include <asm/fpu.h>
+#include <asm/kprobes.h>
+#include <asm/traps.h>
+#include <asm/bl_bit.h>
+
+#ifdef CONFIG_CPU_SH2
+# define TRAP_RESERVED_INST	4
+# define TRAP_ILLEGAL_SLOT_INST	6
+# define TRAP_ADDRESS_ERROR	9
+# ifdef CONFIG_CPU_SH2A
+#  define TRAP_UBC		12
+#  define TRAP_FPU_ERROR	13
+#  define TRAP_DIVZERO_ERROR	17
+#  define TRAP_DIVOVF_ERROR	18
+# endif
+#else
+#define TRAP_RESERVED_INST	12
+#define TRAP_ILLEGAL_SLOT_INST	13
+#endif
+
+static inline void sign_extend(unsigned int count, unsigned char *dst)
+{
+#ifdef __LITTLE_ENDIAN__
+	if ((count == 1) && dst[0] & 0x80) {
+		dst[1] = 0xff;
+		dst[2] = 0xff;
+		dst[3] = 0xff;
+	}
+	if ((count == 2) && dst[1] & 0x80) {
+		dst[2] = 0xff;
+		dst[3] = 0xff;
+	}
+#else
+	if ((count == 1) && dst[3] & 0x80) {
+		dst[2] = 0xff;
+		dst[1] = 0xff;
+		dst[0] = 0xff;
+	}
+	if ((count == 2) && dst[2] & 0x80) {
+		dst[1] = 0xff;
+		dst[0] = 0xff;
+	}
+#endif
+}
+
+static struct mem_access user_mem_access = {
+	copy_from_user,
+	copy_to_user,
+};
+
+/*
+ * handle an instruction that does an unaligned memory access by emulating the
+ * desired behaviour
+ * - note that PC _may not_ point to the faulting instruction
+ *   (if that instruction is in a branch delay slot)
+ * - return 0 if emulation okay, -EFAULT on existential error
+ */
+static int handle_unaligned_ins(insn_size_t instruction, struct pt_regs *regs,
+				struct mem_access *ma)
+{
+	int ret, index, count;
+	unsigned long *rm, *rn;
+	unsigned char *src, *dst;
+	unsigned char __user *srcu, *dstu;
+
+	index = (instruction>>8)&15;	/* 0x0F00 */
+	rn = &regs->regs[index];
+
+	index = (instruction>>4)&15;	/* 0x00F0 */
+	rm = &regs->regs[index];
+
+	count = 1<<(instruction&3);
+
+	switch (count) {
+	case 1: inc_unaligned_byte_access(); break;
+	case 2: inc_unaligned_word_access(); break;
+	case 4: inc_unaligned_dword_access(); break;
+	case 8: inc_unaligned_multi_access(); break;
+	}
+
+	ret = -EFAULT;
+	switch (instruction>>12) {
+	case 0: /* mov.[bwl] to/from memory via r0+rn */
+		if (instruction & 8) {
+			/* from memory */
+			srcu = (unsigned char __user *)*rm;
+			srcu += regs->regs[0];
+			dst = (unsigned char *)rn;
+			*(unsigned long *)dst = 0;
+
+#if !defined(__LITTLE_ENDIAN__)
+			dst += 4-count;
+#endif
+			if (ma->from(dst, srcu, count))
+				goto fetch_fault;
+
+			sign_extend(count, dst);
+		} else {
+			/* to memory */
+			src = (unsigned char *)rm;
+#if !defined(__LITTLE_ENDIAN__)
+			src += 4-count;
+#endif
+			dstu = (unsigned char __user *)*rn;
+			dstu += regs->regs[0];
+
+			if (ma->to(dstu, src, count))
+				goto fetch_fault;
+		}
+		ret = 0;
+		break;
+
+	case 1: /* mov.l Rm,@(disp,Rn) */
+		src = (unsigned char*) rm;
+		dstu = (unsigned char __user *)*rn;
+		dstu += (instruction&0x000F)<<2;
+
+		if (ma->to(dstu, src, 4))
+			goto fetch_fault;
+		ret = 0;
+		break;
+
+	case 2: /* mov.[bwl] to memory, possibly with pre-decrement */
+		if (instruction & 4)
+			*rn -= count;
+		src = (unsigned char*) rm;
+		dstu = (unsigned char __user *)*rn;
+#if !defined(__LITTLE_ENDIAN__)
+		src += 4-count;
+#endif
+		if (ma->to(dstu, src, count))
+			goto fetch_fault;
+		ret = 0;
+		break;
+
+	case 5: /* mov.l @(disp,Rm),Rn */
+		srcu = (unsigned char __user *)*rm;
+		srcu += (instruction & 0x000F) << 2;
+		dst = (unsigned char *)rn;
+		*(unsigned long *)dst = 0;
+
+		if (ma->from(dst, srcu, 4))
+			goto fetch_fault;
+		ret = 0;
+		break;
+
+	case 6:	/* mov.[bwl] from memory, possibly with post-increment */
+		srcu = (unsigned char __user *)*rm;
+		if (instruction & 4)
+			*rm += count;
+		dst = (unsigned char*) rn;
+		*(unsigned long*)dst = 0;
+
+#if !defined(__LITTLE_ENDIAN__)
+		dst += 4-count;
+#endif
+		if (ma->from(dst, srcu, count))
+			goto fetch_fault;
+		sign_extend(count, dst);
+		ret = 0;
+		break;
+
+	case 8:
+		switch ((instruction&0xFF00)>>8) {
+		case 0x81: /* mov.w R0,@(disp,Rn) */
+			src = (unsigned char *) &regs->regs[0];
+#if !defined(__LITTLE_ENDIAN__)
+			src += 2;
+#endif
+			dstu = (unsigned char __user *)*rm; /* called Rn in the spec */
+			dstu += (instruction & 0x000F) << 1;
+
+			if (ma->to(dstu, src, 2))
+				goto fetch_fault;
+			ret = 0;
+			break;
+
+		case 0x85: /* mov.w @(disp,Rm),R0 */
+			srcu = (unsigned char __user *)*rm;
+			srcu += (instruction & 0x000F) << 1;
+			dst = (unsigned char *) &regs->regs[0];
+			*(unsigned long *)dst = 0;
+
+#if !defined(__LITTLE_ENDIAN__)
+			dst += 2;
+#endif
+			if (ma->from(dst, srcu, 2))
+				goto fetch_fault;
+			sign_extend(2, dst);
+			ret = 0;
+			break;
+		}
+		break;
+
+	case 9: /* mov.w @(disp,PC),Rn */
+		srcu = (unsigned char __user *)regs->pc;
+		srcu += 4;
+		srcu += (instruction & 0x00FF) << 1;
+		dst = (unsigned char *)rn;
+		*(unsigned long *)dst = 0;
+
+#if !defined(__LITTLE_ENDIAN__)
+		dst += 2;
+#endif
+
+		if (ma->from(dst, srcu, 2))
+			goto fetch_fault;
+		sign_extend(2, dst);
+		ret = 0;
+		break;
+
+	case 0xd: /* mov.l @(disp,PC),Rn */
+		srcu = (unsigned char __user *)(regs->pc & ~0x3);
+		srcu += 4;
+		srcu += (instruction & 0x00FF) << 2;
+		dst = (unsigned char *)rn;
+		*(unsigned long *)dst = 0;
+
+		if (ma->from(dst, srcu, 4))
+			goto fetch_fault;
+		ret = 0;
+		break;
+	}
+	return ret;
+
+ fetch_fault:
+	/* Argh. Address not only misaligned but also non-existent.
+	 * Raise an EFAULT and see if it's trapped
+	 */
+	die_if_no_fixup("Fault in unaligned fixup", regs, 0);
+	return -EFAULT;
+}
+
+/*
+ * emulate the instruction in the delay slot
+ * - fetches the instruction from PC+2
+ */
+static inline int handle_delayslot(struct pt_regs *regs,
+				   insn_size_t old_instruction,
+				   struct mem_access *ma)
+{
+	insn_size_t instruction;
+	void __user *addr = (void __user *)(regs->pc +
+		instruction_size(old_instruction));
+
+	if (copy_from_user(&instruction, addr, sizeof(instruction))) {
+		/* the instruction-fetch faulted */
+		if (user_mode(regs))
+			return -EFAULT;
+
+		/* kernel */
+		die("delay-slot-insn faulting in handle_unaligned_delayslot",
+		    regs, 0);
+	}
+
+	return handle_unaligned_ins(instruction, regs, ma);
+}
+
+/*
+ * handle an instruction that does an unaligned memory access
+ * - have to be careful of branch delay-slot instructions that fault
+ *  SH3:
+ *   - if the branch would be taken PC points to the branch
+ *   - if the branch would not be taken, PC points to delay-slot
+ *  SH4:
+ *   - PC always points to delayed branch
+ * - return 0 if handled, -EFAULT if failed (may not return if in kernel)
+ */
+
+/* Macros to determine offset from current PC for branch instructions */
+/* Explicit type coercion is used to force sign extension where needed */
+#define SH_PC_8BIT_OFFSET(instr) ((((signed char)(instr))*2) + 4)
+#define SH_PC_12BIT_OFFSET(instr) ((((signed short)(instr<<4))>>3) + 4)
+
+int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
+			    struct mem_access *ma, int expected,
+			    unsigned long address)
+{
+	u_int rm;
+	int ret, index;
+
+	/*
+	 * XXX: We can't handle mixed 16/32-bit instructions yet
+	 */
+	if (instruction_size(instruction) != 2)
+		return -EINVAL;
+
+	index = (instruction>>8)&15;	/* 0x0F00 */
+	rm = regs->regs[index];
+
+	/*
+	 * Log the unexpected fixups, and then pass them on to perf.
+	 *
+	 * We intentionally don't report the expected cases to perf as
+	 * otherwise the trapped I/O case will skew the results too much
+	 * to be useful.
+	 */
+	if (!expected) {
+		unaligned_fixups_notify(current, instruction, regs);
+		perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1,
+			      regs, address);
+	}
+
+	ret = -EFAULT;
+	switch (instruction&0xF000) {
+	case 0x0000:
+		if (instruction==0x000B) {
+			/* rts */
+			ret = handle_delayslot(regs, instruction, ma);
+			if (ret==0)
+				regs->pc = regs->pr;
+		}
+		else if ((instruction&0x00FF)==0x0023) {
+			/* braf @Rm */
+			ret = handle_delayslot(regs, instruction, ma);
+			if (ret==0)
+				regs->pc += rm + 4;
+		}
+		else if ((instruction&0x00FF)==0x0003) {
+			/* bsrf @Rm */
+			ret = handle_delayslot(regs, instruction, ma);
+			if (ret==0) {
+				regs->pr = regs->pc + 4;
+				regs->pc += rm + 4;
+			}
+		}
+		else {
+			/* mov.[bwl] to/from memory via r0+rn */
+			goto simple;
+		}
+		break;
+
+	case 0x1000: /* mov.l Rm,@(disp,Rn) */
+		goto simple;
+
+	case 0x2000: /* mov.[bwl] to memory, possibly with pre-decrement */
+		goto simple;
+
+	case 0x4000:
+		if ((instruction&0x00FF)==0x002B) {
+			/* jmp @Rm */
+			ret = handle_delayslot(regs, instruction, ma);
+			if (ret==0)
+				regs->pc = rm;
+		}
+		else if ((instruction&0x00FF)==0x000B) {
+			/* jsr @Rm */
+			ret = handle_delayslot(regs, instruction, ma);
+			if (ret==0) {
+				regs->pr = regs->pc + 4;
+				regs->pc = rm;
+			}
+		}
+		else {
+			/* mov.[bwl] to/from memory via r0+rn */
+			goto simple;
+		}
+		break;
+
+	case 0x5000: /* mov.l @(disp,Rm),Rn */
+		goto simple;
+
+	case 0x6000: /* mov.[bwl] from memory, possibly with post-increment */
+		goto simple;
+
+	case 0x8000: /* bf lab, bf/s lab, bt lab, bt/s lab */
+		switch (instruction&0x0F00) {
+		case 0x0100: /* mov.w R0,@(disp,Rm) */
+			goto simple;
+		case 0x0500: /* mov.w @(disp,Rm),R0 */
+			goto simple;
+		case 0x0B00: /* bf   lab - no delayslot*/
+			ret = 0;
+			break;
+		case 0x0F00: /* bf/s lab */
+			ret = handle_delayslot(regs, instruction, ma);
+			if (ret==0) {
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
+				if ((regs->sr & 0x00000001) != 0)
+					regs->pc += 4; /* next after slot */
+				else
+#endif
+					regs->pc += SH_PC_8BIT_OFFSET(instruction);
+			}
+			break;
+		case 0x0900: /* bt   lab - no delayslot */
+			ret = 0;
+			break;
+		case 0x0D00: /* bt/s lab */
+			ret = handle_delayslot(regs, instruction, ma);
+			if (ret==0) {
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
+				if ((regs->sr & 0x00000001) == 0)
+					regs->pc += 4; /* next after slot */
+				else
+#endif
+					regs->pc += SH_PC_8BIT_OFFSET(instruction);
+			}
+			break;
+		}
+		break;
+
+	case 0x9000: /* mov.w @(disp,Rm),Rn */
+		goto simple;
+
+	case 0xA000: /* bra label */
+		ret = handle_delayslot(regs, instruction, ma);
+		if (ret==0)
+			regs->pc += SH_PC_12BIT_OFFSET(instruction);
+		break;
+
+	case 0xB000: /* bsr label */
+		ret = handle_delayslot(regs, instruction, ma);
+		if (ret==0) {
+			regs->pr = regs->pc + 4;
+			regs->pc += SH_PC_12BIT_OFFSET(instruction);
+		}
+		break;
+
+	case 0xD000: /* mov.l @(disp,Rm),Rn */
+		goto simple;
+	}
+	return ret;
+
+	/* handle non-delay-slot instruction */
+ simple:
+	ret = handle_unaligned_ins(instruction, regs, ma);
+	if (ret==0)
+		regs->pc += instruction_size(instruction);
+	return ret;
+}
+
+/*
+ * Handle various address error exceptions:
+ *  - instruction address error:
+ *       misaligned PC
+ *       PC >= 0x80000000 in user mode
+ *  - data address error (read and write)
+ *       misaligned data access
+ *       access to >= 0x80000000 is user mode
+ * Unfortuntaly we can't distinguish between instruction address error
+ * and data address errors caused by read accesses.
+ */
+asmlinkage void do_address_error(struct pt_regs *regs,
+				 unsigned long writeaccess,
+				 unsigned long address)
+{
+	unsigned long error_code = 0;
+	mm_segment_t oldfs;
+	siginfo_t info;
+	insn_size_t instruction;
+	int tmp;
+
+	/* Intentional ifdef */
+#ifdef CONFIG_CPU_HAS_SR_RB
+	error_code = lookup_exception_vector();
+#endif
+
+	oldfs = get_fs();
+
+	if (user_mode(regs)) {
+		int si_code = BUS_ADRERR;
+		unsigned int user_action;
+
+		local_irq_enable();
+		inc_unaligned_user_access();
+
+		set_fs(USER_DS);
+		if (copy_from_user(&instruction, (insn_size_t *)(regs->pc & ~1),
+				   sizeof(instruction))) {
+			set_fs(oldfs);
+			goto uspace_segv;
+		}
+		set_fs(oldfs);
+
+		/* shout about userspace fixups */
+		unaligned_fixups_notify(current, instruction, regs);
+
+		user_action = unaligned_user_action();
+		if (user_action & UM_FIXUP)
+			goto fixup;
+		if (user_action & UM_SIGNAL)
+			goto uspace_segv;
+		else {
+			/* ignore */
+			regs->pc += instruction_size(instruction);
+			return;
+		}
+
+fixup:
+		/* bad PC is not something we can fix */
+		if (regs->pc & 1) {
+			si_code = BUS_ADRALN;
+			goto uspace_segv;
+		}
+
+		set_fs(USER_DS);
+		tmp = handle_unaligned_access(instruction, regs,
+					      &user_mem_access, 0,
+					      address);
+		set_fs(oldfs);
+
+		if (tmp == 0)
+			return; /* sorted */
+uspace_segv:
+		printk(KERN_NOTICE "Sending SIGBUS to \"%s\" due to unaligned "
+		       "access (PC %lx PR %lx)\n", current->comm, regs->pc,
+		       regs->pr);
+
+		info.si_signo = SIGBUS;
+		info.si_errno = 0;
+		info.si_code = si_code;
+		info.si_addr = (void __user *)address;
+		force_sig_info(SIGBUS, &info, current);
+	} else {
+		inc_unaligned_kernel_access();
+
+		if (regs->pc & 1)
+			die("unaligned program counter", regs, error_code);
+
+		set_fs(KERNEL_DS);
+		if (copy_from_user(&instruction, (void __user *)(regs->pc),
+				   sizeof(instruction))) {
+			/* Argh. Fault on the instruction itself.
+			   This should never happen non-SMP
+			*/
+			set_fs(oldfs);
+			die("insn faulting in do_address_error", regs, 0);
+		}
+
+		unaligned_fixups_notify(current, instruction, regs);
+
+		handle_unaligned_access(instruction, regs, &user_mem_access,
+					0, address);
+		set_fs(oldfs);
+	}
+}
+
+#ifdef CONFIG_SH_DSP
+/*
+ *	SH-DSP support gerg@snapgear.com.
+ */
+int is_dsp_inst(struct pt_regs *regs)
+{
+	unsigned short inst = 0;
+
+	/*
+	 * Safe guard if DSP mode is already enabled or we're lacking
+	 * the DSP altogether.
+	 */
+	if (!(current_cpu_data.flags & CPU_HAS_DSP) || (regs->sr & SR_DSP))
+		return 0;
+
+	get_user(inst, ((unsigned short *) regs->pc));
+
+	inst &= 0xf000;
+
+	/* Check for any type of DSP or support instruction */
+	if ((inst == 0xf000) || (inst == 0x4000))
+		return 1;
+
+	return 0;
+}
+#else
+#define is_dsp_inst(regs)	(0)
+#endif /* CONFIG_SH_DSP */
+
+#ifdef CONFIG_CPU_SH2A
+asmlinkage void do_divide_error(unsigned long r4)
+{
+	siginfo_t info;
+
+	switch (r4) {
+	case TRAP_DIVZERO_ERROR:
+		info.si_code = FPE_INTDIV;
+		break;
+	case TRAP_DIVOVF_ERROR:
+		info.si_code = FPE_INTOVF;
+		break;
+	}
+
+	info.si_signo = SIGFPE;
+	force_sig_info(info.si_signo, &info, current);
+}
+#endif
+
+asmlinkage void do_reserved_inst(void)
+{
+	struct pt_regs *regs = current_pt_regs();
+	unsigned long error_code;
+	struct task_struct *tsk = current;
+
+#ifdef CONFIG_SH_FPU_EMU
+	unsigned short inst = 0;
+	int err;
+
+	get_user(inst, (unsigned short*)regs->pc);
+
+	err = do_fpu_inst(inst, regs);
+	if (!err) {
+		regs->pc += instruction_size(inst);
+		return;
+	}
+	/* not a FPU inst. */
+#endif
+
+#ifdef CONFIG_SH_DSP
+	/* Check if it's a DSP instruction */
+	if (is_dsp_inst(regs)) {
+		/* Enable DSP mode, and restart instruction. */
+		regs->sr |= SR_DSP;
+		/* Save DSP mode */
+		tsk->thread.dsp_status.status |= SR_DSP;
+		return;
+	}
+#endif
+
+	error_code = lookup_exception_vector();
+
+	local_irq_enable();
+	force_sig(SIGILL, tsk);
+	die_if_no_fixup("reserved instruction", regs, error_code);
+}
+
+#ifdef CONFIG_SH_FPU_EMU
+static int emulate_branch(unsigned short inst, struct pt_regs *regs)
+{
+	/*
+	 * bfs: 8fxx: PC+=d*2+4;
+	 * bts: 8dxx: PC+=d*2+4;
+	 * bra: axxx: PC+=D*2+4;
+	 * bsr: bxxx: PC+=D*2+4  after PR=PC+4;
+	 * braf:0x23: PC+=Rn*2+4;
+	 * bsrf:0x03: PC+=Rn*2+4 after PR=PC+4;
+	 * jmp: 4x2b: PC=Rn;
+	 * jsr: 4x0b: PC=Rn      after PR=PC+4;
+	 * rts: 000b: PC=PR;
+	 */
+	if (((inst & 0xf000) == 0xb000)  ||	/* bsr */
+	    ((inst & 0xf0ff) == 0x0003)  ||	/* bsrf */
+	    ((inst & 0xf0ff) == 0x400b))	/* jsr */
+		regs->pr = regs->pc + 4;
+
+	if ((inst & 0xfd00) == 0x8d00) {	/* bfs, bts */
+		regs->pc += SH_PC_8BIT_OFFSET(inst);
+		return 0;
+	}
+
+	if ((inst & 0xe000) == 0xa000) {	/* bra, bsr */
+		regs->pc += SH_PC_12BIT_OFFSET(inst);
+		return 0;
+	}
+
+	if ((inst & 0xf0df) == 0x0003) {	/* braf, bsrf */
+		regs->pc += regs->regs[(inst & 0x0f00) >> 8] + 4;
+		return 0;
+	}
+
+	if ((inst & 0xf0df) == 0x400b) {	/* jmp, jsr */
+		regs->pc = regs->regs[(inst & 0x0f00) >> 8];
+		return 0;
+	}
+
+	if ((inst & 0xffff) == 0x000b) {	/* rts */
+		regs->pc = regs->pr;
+		return 0;
+	}
+
+	return 1;
+}
+#endif
+
+asmlinkage void do_illegal_slot_inst(void)
+{
+	struct pt_regs *regs = current_pt_regs();
+	unsigned long inst;
+	struct task_struct *tsk = current;
+
+	if (kprobe_handle_illslot(regs->pc) == 0)
+		return;
+
+#ifdef CONFIG_SH_FPU_EMU
+	get_user(inst, (unsigned short *)regs->pc + 1);
+	if (!do_fpu_inst(inst, regs)) {
+		get_user(inst, (unsigned short *)regs->pc);
+		if (!emulate_branch(inst, regs))
+			return;
+		/* fault in branch.*/
+	}
+	/* not a FPU inst. */
+#endif
+
+	inst = lookup_exception_vector();
+
+	local_irq_enable();
+	force_sig(SIGILL, tsk);
+	die_if_no_fixup("illegal slot instruction", regs, inst);
+}
+
+asmlinkage void do_exception_error(void)
+{
+	long ex;
+
+	ex = lookup_exception_vector();
+	die_if_kernel("exception", current_pt_regs(), ex);
+}
+
+void per_cpu_trap_init(void)
+{
+	extern void *vbr_base;
+
+	/* NOTE: The VBR value should be at P1
+	   (or P2, virtural "fixed" address space).
+	   It's definitely should not in physical address.  */
+
+	asm volatile("ldc	%0, vbr"
+		     : /* no output */
+		     : "r" (&vbr_base)
+		     : "memory");
+
+	/* disable exception blocking now when the vbr has been setup */
+	clear_bl_bit();
+}
+
+void *set_exception_table_vec(unsigned int vec, void *handler)
+{
+	extern void *exception_handling_table[];
+	void *old_handler;
+
+	old_handler = exception_handling_table[vec];
+	exception_handling_table[vec] = handler;
+	return old_handler;
+}
+
+void __init trap_init(void)
+{
+	set_exception_table_vec(TRAP_RESERVED_INST, do_reserved_inst);
+	set_exception_table_vec(TRAP_ILLEGAL_SLOT_INST, do_illegal_slot_inst);
+
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_FPU) || \
+    defined(CONFIG_SH_FPU_EMU)
+	/*
+	 * For SH-4 lacking an FPU, treat floating point instructions as
+	 * reserved. They'll be handled in the math-emu case, or faulted on
+	 * otherwise.
+	 */
+	set_exception_table_evt(0x800, do_reserved_inst);
+	set_exception_table_evt(0x820, do_illegal_slot_inst);
+#elif defined(CONFIG_SH_FPU)
+	set_exception_table_evt(0x800, fpu_state_restore_trap_handler);
+	set_exception_table_evt(0x820, fpu_state_restore_trap_handler);
+#endif
+
+#ifdef CONFIG_CPU_SH2
+	set_exception_table_vec(TRAP_ADDRESS_ERROR, address_error_trap_handler);
+#endif
+#ifdef CONFIG_CPU_SH2A
+	set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error);
+	set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error);
+#ifdef CONFIG_SH_FPU
+	set_exception_table_vec(TRAP_FPU_ERROR, fpu_error_trap_handler);
+#endif
+#endif
+
+#ifdef TRAP_UBC
+	set_exception_table_vec(TRAP_UBC, breakpoint_trap_handler);
+#endif
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/traps_64.c b/src/kernel/linux/v4.14/arch/sh/kernel/traps_64.c
new file mode 100644
index 0000000..014fb08
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/traps_64.c
@@ -0,0 +1,817 @@
+/*
+ * arch/sh/kernel/traps_64.c
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ * Copyright (C) 2003, 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/kallsyms.h>
+#include <linux/interrupt.h>
+#include <linux/sysctl.h>
+#include <linux/module.h>
+#include <linux/perf_event.h>
+#include <linux/uaccess.h>
+#include <asm/io.h>
+#include <asm/alignment.h>
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/fpu.h>
+
+static int read_opcode(reg_size_t pc, insn_size_t *result_opcode, int from_user_mode)
+{
+	int get_user_error;
+	unsigned long aligned_pc;
+	insn_size_t opcode;
+
+	if ((pc & 3) == 1) {
+		/* SHmedia */
+		aligned_pc = pc & ~3;
+		if (from_user_mode) {
+			if (!access_ok(VERIFY_READ, aligned_pc, sizeof(insn_size_t))) {
+				get_user_error = -EFAULT;
+			} else {
+				get_user_error = __get_user(opcode, (insn_size_t *)aligned_pc);
+				*result_opcode = opcode;
+			}
+			return get_user_error;
+		} else {
+			/* If the fault was in the kernel, we can either read
+			 * this directly, or if not, we fault.
+			*/
+			*result_opcode = *(insn_size_t *)aligned_pc;
+			return 0;
+		}
+	} else if ((pc & 1) == 0) {
+		/* SHcompact */
+		/* TODO : provide handling for this.  We don't really support
+		   user-mode SHcompact yet, and for a kernel fault, this would
+		   have to come from a module built for SHcompact.  */
+		return -EFAULT;
+	} else {
+		/* misaligned */
+		return -EFAULT;
+	}
+}
+
+static int address_is_sign_extended(__u64 a)
+{
+	__u64 b;
+#if (NEFF == 32)
+	b = (__u64)(__s64)(__s32)(a & 0xffffffffUL);
+	return (b == a) ? 1 : 0;
+#else
+#error "Sign extend check only works for NEFF==32"
+#endif
+}
+
+/* return -1 for fault, 0 for OK */
+static int generate_and_check_address(struct pt_regs *regs,
+				      insn_size_t opcode,
+				      int displacement_not_indexed,
+				      int width_shift,
+				      __u64 *address)
+{
+	__u64 base_address, addr;
+	int basereg;
+
+	switch (1 << width_shift) {
+	case 1: inc_unaligned_byte_access(); break;
+	case 2: inc_unaligned_word_access(); break;
+	case 4: inc_unaligned_dword_access(); break;
+	case 8: inc_unaligned_multi_access(); break;
+	}
+
+	basereg = (opcode >> 20) & 0x3f;
+	base_address = regs->regs[basereg];
+	if (displacement_not_indexed) {
+		__s64 displacement;
+		displacement = (opcode >> 10) & 0x3ff;
+		displacement = sign_extend64(displacement, 9);
+		addr = (__u64)((__s64)base_address + (displacement << width_shift));
+	} else {
+		__u64 offset;
+		int offsetreg;
+		offsetreg = (opcode >> 10) & 0x3f;
+		offset = regs->regs[offsetreg];
+		addr = base_address + offset;
+	}
+
+	/* Check sign extended */
+	if (!address_is_sign_extended(addr))
+		return -1;
+
+	/* Check accessible.  For misaligned access in the kernel, assume the
+	   address is always accessible (and if not, just fault when the
+	   load/store gets done.) */
+	if (user_mode(regs)) {
+		inc_unaligned_user_access();
+
+		if (addr >= TASK_SIZE)
+			return -1;
+	} else
+		inc_unaligned_kernel_access();
+
+	*address = addr;
+
+	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, addr);
+	unaligned_fixups_notify(current, opcode, regs);
+
+	return 0;
+}
+
+static void misaligned_kernel_word_load(__u64 address, int do_sign_extend, __u64 *result)
+{
+	unsigned short x;
+	unsigned char *p, *q;
+	p = (unsigned char *) (int) address;
+	q = (unsigned char *) &x;
+	q[0] = p[0];
+	q[1] = p[1];
+
+	if (do_sign_extend) {
+		*result = (__u64)(__s64) *(short *) &x;
+	} else {
+		*result = (__u64) x;
+	}
+}
+
+static void misaligned_kernel_word_store(__u64 address, __u64 value)
+{
+	unsigned short x;
+	unsigned char *p, *q;
+	p = (unsigned char *) (int) address;
+	q = (unsigned char *) &x;
+
+	x = (__u16) value;
+	p[0] = q[0];
+	p[1] = q[1];
+}
+
+static int misaligned_load(struct pt_regs *regs,
+			   insn_size_t opcode,
+			   int displacement_not_indexed,
+			   int width_shift,
+			   int do_sign_extend)
+{
+	/* Return -1 for a fault, 0 for OK */
+	int error;
+	int destreg;
+	__u64 address;
+
+	error = generate_and_check_address(regs, opcode,
+			displacement_not_indexed, width_shift, &address);
+	if (error < 0)
+		return error;
+
+	destreg = (opcode >> 4) & 0x3f;
+	if (user_mode(regs)) {
+		__u64 buffer;
+
+		if (!access_ok(VERIFY_READ, (unsigned long) address, 1UL<<width_shift)) {
+			return -1;
+		}
+
+		if (__copy_user(&buffer, (const void *)(int)address, (1 << width_shift)) > 0) {
+			return -1; /* fault */
+		}
+		switch (width_shift) {
+		case 1:
+			if (do_sign_extend) {
+				regs->regs[destreg] = (__u64)(__s64) *(__s16 *) &buffer;
+			} else {
+				regs->regs[destreg] = (__u64) *(__u16 *) &buffer;
+			}
+			break;
+		case 2:
+			regs->regs[destreg] = (__u64)(__s64) *(__s32 *) &buffer;
+			break;
+		case 3:
+			regs->regs[destreg] = buffer;
+			break;
+		default:
+			printk("Unexpected width_shift %d in misaligned_load, PC=%08lx\n",
+				width_shift, (unsigned long) regs->pc);
+			break;
+		}
+	} else {
+		/* kernel mode - we can take short cuts since if we fault, it's a genuine bug */
+		__u64 lo, hi;
+
+		switch (width_shift) {
+		case 1:
+			misaligned_kernel_word_load(address, do_sign_extend, &regs->regs[destreg]);
+			break;
+		case 2:
+			asm ("ldlo.l %1, 0, %0" : "=r" (lo) : "r" (address));
+			asm ("ldhi.l %1, 3, %0" : "=r" (hi) : "r" (address));
+			regs->regs[destreg] = lo | hi;
+			break;
+		case 3:
+			asm ("ldlo.q %1, 0, %0" : "=r" (lo) : "r" (address));
+			asm ("ldhi.q %1, 7, %0" : "=r" (hi) : "r" (address));
+			regs->regs[destreg] = lo | hi;
+			break;
+
+		default:
+			printk("Unexpected width_shift %d in misaligned_load, PC=%08lx\n",
+				width_shift, (unsigned long) regs->pc);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int misaligned_store(struct pt_regs *regs,
+			    insn_size_t opcode,
+			    int displacement_not_indexed,
+			    int width_shift)
+{
+	/* Return -1 for a fault, 0 for OK */
+	int error;
+	int srcreg;
+	__u64 address;
+
+	error = generate_and_check_address(regs, opcode,
+			displacement_not_indexed, width_shift, &address);
+	if (error < 0)
+		return error;
+
+	srcreg = (opcode >> 4) & 0x3f;
+	if (user_mode(regs)) {
+		__u64 buffer;
+
+		if (!access_ok(VERIFY_WRITE, (unsigned long) address, 1UL<<width_shift)) {
+			return -1;
+		}
+
+		switch (width_shift) {
+		case 1:
+			*(__u16 *) &buffer = (__u16) regs->regs[srcreg];
+			break;
+		case 2:
+			*(__u32 *) &buffer = (__u32) regs->regs[srcreg];
+			break;
+		case 3:
+			buffer = regs->regs[srcreg];
+			break;
+		default:
+			printk("Unexpected width_shift %d in misaligned_store, PC=%08lx\n",
+				width_shift, (unsigned long) regs->pc);
+			break;
+		}
+
+		if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) {
+			return -1; /* fault */
+		}
+	} else {
+		/* kernel mode - we can take short cuts since if we fault, it's a genuine bug */
+		__u64 val = regs->regs[srcreg];
+
+		switch (width_shift) {
+		case 1:
+			misaligned_kernel_word_store(address, val);
+			break;
+		case 2:
+			asm ("stlo.l %1, 0, %0" : : "r" (val), "r" (address));
+			asm ("sthi.l %1, 3, %0" : : "r" (val), "r" (address));
+			break;
+		case 3:
+			asm ("stlo.q %1, 0, %0" : : "r" (val), "r" (address));
+			asm ("sthi.q %1, 7, %0" : : "r" (val), "r" (address));
+			break;
+
+		default:
+			printk("Unexpected width_shift %d in misaligned_store, PC=%08lx\n",
+				width_shift, (unsigned long) regs->pc);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/* Never need to fix up misaligned FPU accesses within the kernel since that's a real
+   error. */
+static int misaligned_fpu_load(struct pt_regs *regs,
+			   insn_size_t opcode,
+			   int displacement_not_indexed,
+			   int width_shift,
+			   int do_paired_load)
+{
+	/* Return -1 for a fault, 0 for OK */
+	int error;
+	int destreg;
+	__u64 address;
+
+	error = generate_and_check_address(regs, opcode,
+			displacement_not_indexed, width_shift, &address);
+	if (error < 0)
+		return error;
+
+	destreg = (opcode >> 4) & 0x3f;
+	if (user_mode(regs)) {
+		__u64 buffer;
+		__u32 buflo, bufhi;
+
+		if (!access_ok(VERIFY_READ, (unsigned long) address, 1UL<<width_shift)) {
+			return -1;
+		}
+
+		if (__copy_user(&buffer, (const void *)(int)address, (1 << width_shift)) > 0) {
+			return -1; /* fault */
+		}
+		/* 'current' may be the current owner of the FPU state, so
+		   context switch the registers into memory so they can be
+		   indexed by register number. */
+		if (last_task_used_math == current) {
+			enable_fpu();
+			save_fpu(current);
+			disable_fpu();
+			last_task_used_math = NULL;
+			regs->sr |= SR_FD;
+		}
+
+		buflo = *(__u32*) &buffer;
+		bufhi = *(1 + (__u32*) &buffer);
+
+		switch (width_shift) {
+		case 2:
+			current->thread.xstate->hardfpu.fp_regs[destreg] = buflo;
+			break;
+		case 3:
+			if (do_paired_load) {
+				current->thread.xstate->hardfpu.fp_regs[destreg] = buflo;
+				current->thread.xstate->hardfpu.fp_regs[destreg+1] = bufhi;
+			} else {
+#if defined(CONFIG_CPU_LITTLE_ENDIAN)
+				current->thread.xstate->hardfpu.fp_regs[destreg] = bufhi;
+				current->thread.xstate->hardfpu.fp_regs[destreg+1] = buflo;
+#else
+				current->thread.xstate->hardfpu.fp_regs[destreg] = buflo;
+				current->thread.xstate->hardfpu.fp_regs[destreg+1] = bufhi;
+#endif
+			}
+			break;
+		default:
+			printk("Unexpected width_shift %d in misaligned_fpu_load, PC=%08lx\n",
+				width_shift, (unsigned long) regs->pc);
+			break;
+		}
+		return 0;
+	} else {
+		die ("Misaligned FPU load inside kernel", regs, 0);
+		return -1;
+	}
+}
+
+static int misaligned_fpu_store(struct pt_regs *regs,
+			   insn_size_t opcode,
+			   int displacement_not_indexed,
+			   int width_shift,
+			   int do_paired_load)
+{
+	/* Return -1 for a fault, 0 for OK */
+	int error;
+	int srcreg;
+	__u64 address;
+
+	error = generate_and_check_address(regs, opcode,
+			displacement_not_indexed, width_shift, &address);
+	if (error < 0)
+		return error;
+
+	srcreg = (opcode >> 4) & 0x3f;
+	if (user_mode(regs)) {
+		__u64 buffer;
+		/* Initialise these to NaNs. */
+		__u32 buflo=0xffffffffUL, bufhi=0xffffffffUL;
+
+		if (!access_ok(VERIFY_WRITE, (unsigned long) address, 1UL<<width_shift)) {
+			return -1;
+		}
+
+		/* 'current' may be the current owner of the FPU state, so
+		   context switch the registers into memory so they can be
+		   indexed by register number. */
+		if (last_task_used_math == current) {
+			enable_fpu();
+			save_fpu(current);
+			disable_fpu();
+			last_task_used_math = NULL;
+			regs->sr |= SR_FD;
+		}
+
+		switch (width_shift) {
+		case 2:
+			buflo = current->thread.xstate->hardfpu.fp_regs[srcreg];
+			break;
+		case 3:
+			if (do_paired_load) {
+				buflo = current->thread.xstate->hardfpu.fp_regs[srcreg];
+				bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg+1];
+			} else {
+#if defined(CONFIG_CPU_LITTLE_ENDIAN)
+				bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg];
+				buflo = current->thread.xstate->hardfpu.fp_regs[srcreg+1];
+#else
+				buflo = current->thread.xstate->hardfpu.fp_regs[srcreg];
+				bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg+1];
+#endif
+			}
+			break;
+		default:
+			printk("Unexpected width_shift %d in misaligned_fpu_store, PC=%08lx\n",
+				width_shift, (unsigned long) regs->pc);
+			break;
+		}
+
+		*(__u32*) &buffer = buflo;
+		*(1 + (__u32*) &buffer) = bufhi;
+		if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) {
+			return -1; /* fault */
+		}
+		return 0;
+	} else {
+		die ("Misaligned FPU load inside kernel", regs, 0);
+		return -1;
+	}
+}
+
+static int misaligned_fixup(struct pt_regs *regs)
+{
+	insn_size_t opcode;
+	int error;
+	int major, minor;
+	unsigned int user_action;
+
+	user_action = unaligned_user_action();
+	if (!(user_action & UM_FIXUP))
+		return -1;
+
+	error = read_opcode(regs->pc, &opcode, user_mode(regs));
+	if (error < 0) {
+		return error;
+	}
+	major = (opcode >> 26) & 0x3f;
+	minor = (opcode >> 16) & 0xf;
+
+	switch (major) {
+		case (0x84>>2): /* LD.W */
+			error = misaligned_load(regs, opcode, 1, 1, 1);
+			break;
+		case (0xb0>>2): /* LD.UW */
+			error = misaligned_load(regs, opcode, 1, 1, 0);
+			break;
+		case (0x88>>2): /* LD.L */
+			error = misaligned_load(regs, opcode, 1, 2, 1);
+			break;
+		case (0x8c>>2): /* LD.Q */
+			error = misaligned_load(regs, opcode, 1, 3, 0);
+			break;
+
+		case (0xa4>>2): /* ST.W */
+			error = misaligned_store(regs, opcode, 1, 1);
+			break;
+		case (0xa8>>2): /* ST.L */
+			error = misaligned_store(regs, opcode, 1, 2);
+			break;
+		case (0xac>>2): /* ST.Q */
+			error = misaligned_store(regs, opcode, 1, 3);
+			break;
+
+		case (0x40>>2): /* indexed loads */
+			switch (minor) {
+				case 0x1: /* LDX.W */
+					error = misaligned_load(regs, opcode, 0, 1, 1);
+					break;
+				case 0x5: /* LDX.UW */
+					error = misaligned_load(regs, opcode, 0, 1, 0);
+					break;
+				case 0x2: /* LDX.L */
+					error = misaligned_load(regs, opcode, 0, 2, 1);
+					break;
+				case 0x3: /* LDX.Q */
+					error = misaligned_load(regs, opcode, 0, 3, 0);
+					break;
+				default:
+					error = -1;
+					break;
+			}
+			break;
+
+		case (0x60>>2): /* indexed stores */
+			switch (minor) {
+				case 0x1: /* STX.W */
+					error = misaligned_store(regs, opcode, 0, 1);
+					break;
+				case 0x2: /* STX.L */
+					error = misaligned_store(regs, opcode, 0, 2);
+					break;
+				case 0x3: /* STX.Q */
+					error = misaligned_store(regs, opcode, 0, 3);
+					break;
+				default:
+					error = -1;
+					break;
+			}
+			break;
+
+		case (0x94>>2): /* FLD.S */
+			error = misaligned_fpu_load(regs, opcode, 1, 2, 0);
+			break;
+		case (0x98>>2): /* FLD.P */
+			error = misaligned_fpu_load(regs, opcode, 1, 3, 1);
+			break;
+		case (0x9c>>2): /* FLD.D */
+			error = misaligned_fpu_load(regs, opcode, 1, 3, 0);
+			break;
+		case (0x1c>>2): /* floating indexed loads */
+			switch (minor) {
+			case 0x8: /* FLDX.S */
+				error = misaligned_fpu_load(regs, opcode, 0, 2, 0);
+				break;
+			case 0xd: /* FLDX.P */
+				error = misaligned_fpu_load(regs, opcode, 0, 3, 1);
+				break;
+			case 0x9: /* FLDX.D */
+				error = misaligned_fpu_load(regs, opcode, 0, 3, 0);
+				break;
+			default:
+				error = -1;
+				break;
+			}
+			break;
+		case (0xb4>>2): /* FLD.S */
+			error = misaligned_fpu_store(regs, opcode, 1, 2, 0);
+			break;
+		case (0xb8>>2): /* FLD.P */
+			error = misaligned_fpu_store(regs, opcode, 1, 3, 1);
+			break;
+		case (0xbc>>2): /* FLD.D */
+			error = misaligned_fpu_store(regs, opcode, 1, 3, 0);
+			break;
+		case (0x3c>>2): /* floating indexed stores */
+			switch (minor) {
+			case 0x8: /* FSTX.S */
+				error = misaligned_fpu_store(regs, opcode, 0, 2, 0);
+				break;
+			case 0xd: /* FSTX.P */
+				error = misaligned_fpu_store(regs, opcode, 0, 3, 1);
+				break;
+			case 0x9: /* FSTX.D */
+				error = misaligned_fpu_store(regs, opcode, 0, 3, 0);
+				break;
+			default:
+				error = -1;
+				break;
+			}
+			break;
+
+		default:
+			/* Fault */
+			error = -1;
+			break;
+	}
+
+	if (error < 0) {
+		return error;
+	} else {
+		regs->pc += 4; /* Skip the instruction that's just been emulated */
+		return 0;
+	}
+}
+
+static void do_unhandled_exception(int signr, char *str, unsigned long error,
+				   struct pt_regs *regs)
+{
+	if (user_mode(regs))
+		force_sig(signr, current);
+
+	die_if_no_fixup(str, regs, error);
+}
+
+#define DO_ERROR(signr, str, name) \
+asmlinkage void do_##name(unsigned long error_code, struct pt_regs *regs) \
+{ \
+	do_unhandled_exception(signr, str, error_code, regs); \
+}
+
+DO_ERROR(SIGILL,  "illegal slot instruction", illegal_slot_inst)
+DO_ERROR(SIGSEGV, "address error (exec)", address_error_exec)
+
+#if defined(CONFIG_SH64_ID2815_WORKAROUND)
+
+#define OPCODE_INVALID      0
+#define OPCODE_USER_VALID   1
+#define OPCODE_PRIV_VALID   2
+
+/* getcon/putcon - requires checking which control register is referenced. */
+#define OPCODE_CTRL_REG     3
+
+/* Table of valid opcodes for SHmedia mode.
+   Form a 10-bit value by concatenating the major/minor opcodes i.e.
+   opcode[31:26,20:16].  The 6 MSBs of this value index into the following
+   array.  The 4 LSBs select the bit-pair in the entry (bits 1:0 correspond to
+   LSBs==4'b0000 etc). */
+static unsigned long shmedia_opcode_table[64] = {
+	0x55554044,0x54445055,0x15141514,0x14541414,0x00000000,0x10001000,0x01110055,0x04050015,
+	0x00000444,0xc0000000,0x44545515,0x40405555,0x55550015,0x10005555,0x55555505,0x04050000,
+	0x00000555,0x00000404,0x00040445,0x15151414,0x00000000,0x00000000,0x00000000,0x00000000,
+	0x00000055,0x40404444,0x00000404,0xc0009495,0x00000000,0x00000000,0x00000000,0x00000000,
+	0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
+	0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
+	0x80005050,0x04005055,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
+	0x81055554,0x00000404,0x55555555,0x55555555,0x00000000,0x00000000,0x00000000,0x00000000
+};
+
+/* Workaround SH5-101 cut2 silicon defect #2815 :
+   in some situations, inter-mode branches from SHcompact -> SHmedia
+   which should take ITLBMISS or EXECPROT exceptions at the target
+   falsely take RESINST at the target instead. */
+void do_reserved_inst(unsigned long error_code, struct pt_regs *regs)
+{
+	insn_size_t opcode = 0x6ff4fff0; /* guaranteed reserved opcode */
+	unsigned long pc, aligned_pc;
+	unsigned long index, shift;
+	unsigned long major, minor, combined;
+	unsigned long reserved_field;
+	int opcode_state;
+	int get_user_error;
+	int signr = SIGILL;
+	char *exception_name = "reserved_instruction";
+
+	pc = regs->pc;
+
+	/* SHcompact is not handled */
+	if (unlikely((pc & 3) == 0))
+		goto out;
+
+	/* SHmedia : check for defect.  This requires executable vmas
+	   to be readable too. */
+	aligned_pc = pc & ~3;
+	if (!access_ok(VERIFY_READ, aligned_pc, sizeof(insn_size_t)))
+		get_user_error = -EFAULT;
+	else
+		get_user_error = __get_user(opcode, (insn_size_t *)aligned_pc);
+
+	if (get_user_error < 0) {
+		/*
+		 * Error trying to read opcode.  This typically means a
+		 * real fault, not a RESINST any more.  So change the
+		 * codes.
+		 */
+		exception_name = "address error (exec)";
+		signr = SIGSEGV;
+		goto out;
+	}
+
+	/* These bits are currently reserved as zero in all valid opcodes */
+	reserved_field = opcode & 0xf;
+	if (unlikely(reserved_field))
+		goto out;	/* invalid opcode */
+
+	major = (opcode >> 26) & 0x3f;
+	minor = (opcode >> 16) & 0xf;
+	combined = (major << 4) | minor;
+	index = major;
+	shift = minor << 1;
+	opcode_state = (shmedia_opcode_table[index] >> shift) & 0x3;
+	switch (opcode_state) {
+	case OPCODE_INVALID:
+		/* Trap. */
+		break;
+	case OPCODE_USER_VALID:
+		/*
+		 * Restart the instruction: the branch to the instruction
+		 * will now be from an RTE not from SHcompact so the
+		 * silicon defect won't be triggered.
+		 */
+		return;
+	case OPCODE_PRIV_VALID:
+		if (!user_mode(regs)) {
+			/*
+			 * Should only ever get here if a module has
+			 * SHcompact code inside it. If so, the same fix
+			 * up is needed.
+			 */
+			return; /* same reason */
+		}
+
+		/*
+		 * Otherwise, user mode trying to execute a privileged
+		 * instruction - fall through to trap.
+		 */
+		break;
+	case OPCODE_CTRL_REG:
+		/* If in privileged mode, return as above. */
+		if (!user_mode(regs))
+			return;
+
+		/* In user mode ... */
+		if (combined == 0x9f) { /* GETCON */
+			unsigned long regno = (opcode >> 20) & 0x3f;
+
+			if (regno >= 62)
+				return;
+
+			/* reserved/privileged control register => trap */
+		} else if (combined == 0x1bf) { /* PUTCON */
+			unsigned long regno = (opcode >> 4) & 0x3f;
+
+			if (regno >= 62)
+				return;
+
+			/* reserved/privileged control register => trap */
+		}
+
+		break;
+	default:
+		/* Fall through to trap. */
+		break;
+	}
+
+out:
+	do_unhandled_exception(signr, exception_name, error_code, regs);
+}
+
+#else /* CONFIG_SH64_ID2815_WORKAROUND */
+
+/* If the workaround isn't needed, this is just a straightforward reserved
+   instruction */
+DO_ERROR(SIGILL, "reserved instruction", reserved_inst)
+
+#endif /* CONFIG_SH64_ID2815_WORKAROUND */
+
+/* Called with interrupts disabled */
+asmlinkage void do_exception_error(unsigned long ex, struct pt_regs *regs)
+{
+	die_if_kernel("exception", regs, ex);
+}
+
+asmlinkage int do_unknown_trapa(unsigned long scId, struct pt_regs *regs)
+{
+	/* Syscall debug */
+	printk("System call ID error: [0x1#args:8 #syscall:16  0x%lx]\n", scId);
+
+	die_if_kernel("unknown trapa", regs, scId);
+
+	return -ENOSYS;
+}
+
+/* Implement misaligned load/store handling for kernel (and optionally for user
+   mode too).  Limitation : only SHmedia mode code is handled - there is no
+   handling at all for misaligned accesses occurring in SHcompact code yet. */
+
+asmlinkage void do_address_error_load(unsigned long error_code, struct pt_regs *regs)
+{
+	if (misaligned_fixup(regs) < 0)
+		do_unhandled_exception(SIGSEGV, "address error(load)",
+				       error_code, regs);
+}
+
+asmlinkage void do_address_error_store(unsigned long error_code, struct pt_regs *regs)
+{
+	if (misaligned_fixup(regs) < 0)
+		do_unhandled_exception(SIGSEGV, "address error(store)",
+				error_code, regs);
+}
+
+asmlinkage void do_debug_interrupt(unsigned long code, struct pt_regs *regs)
+{
+	u64 peek_real_address_q(u64 addr);
+	u64 poke_real_address_q(u64 addr, u64 val);
+	unsigned long long DM_EXP_CAUSE_PHY = 0x0c100010;
+	unsigned long long exp_cause;
+	/* It's not worth ioremapping the debug module registers for the amount
+	   of access we make to them - just go direct to their physical
+	   addresses. */
+	exp_cause = peek_real_address_q(DM_EXP_CAUSE_PHY);
+	if (exp_cause & ~4)
+		printk("DM.EXP_CAUSE had unexpected bits set (=%08lx)\n",
+			(unsigned long)(exp_cause & 0xffffffff));
+	show_state();
+	/* Clear all DEBUGINT causes */
+	poke_real_address_q(DM_EXP_CAUSE_PHY, 0x0);
+}
+
+void per_cpu_trap_init(void)
+{
+	/* Nothing to do for now, VBR initialization later. */
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/unwinder.c b/src/kernel/linux/v4.14/arch/sh/kernel/unwinder.c
new file mode 100644
index 0000000..521b543
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/unwinder.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright (C) 2009  Matt Fleming
+ *
+ * Based, in part, on kernel/time/clocksource.c.
+ *
+ * This file provides arbitration code for stack unwinders.
+ *
+ * Multiple stack unwinders can be available on a system, usually with
+ * the most accurate unwinder being the currently active one.
+ */
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <asm/unwinder.h>
+#include <linux/atomic.h>
+
+/*
+ * This is the most basic stack unwinder an architecture can
+ * provide. For architectures without reliable frame pointers, e.g.
+ * RISC CPUs, it can be implemented by looking through the stack for
+ * addresses that lie within the kernel text section.
+ *
+ * Other CPUs, e.g. x86, can use their frame pointer register to
+ * construct more accurate stack traces.
+ */
+static struct list_head unwinder_list;
+static struct unwinder stack_reader = {
+	.name = "stack-reader",
+	.dump = stack_reader_dump,
+	.rating = 50,
+	.list = {
+		.next = &unwinder_list,
+		.prev = &unwinder_list,
+	},
+};
+
+/*
+ * "curr_unwinder" points to the stack unwinder currently in use. This
+ * is the unwinder with the highest rating.
+ *
+ * "unwinder_list" is a linked-list of all available unwinders, sorted
+ * by rating.
+ *
+ * All modifications of "curr_unwinder" and "unwinder_list" must be
+ * performed whilst holding "unwinder_lock".
+ */
+static struct unwinder *curr_unwinder = &stack_reader;
+
+static struct list_head unwinder_list = {
+	.next = &stack_reader.list,
+	.prev = &stack_reader.list,
+};
+
+static DEFINE_SPINLOCK(unwinder_lock);
+
+/**
+ * select_unwinder - Select the best registered stack unwinder.
+ *
+ * Private function. Must hold unwinder_lock when called.
+ *
+ * Select the stack unwinder with the best rating. This is useful for
+ * setting up curr_unwinder.
+ */
+static struct unwinder *select_unwinder(void)
+{
+	struct unwinder *best;
+
+	if (list_empty(&unwinder_list))
+		return NULL;
+
+	best = list_entry(unwinder_list.next, struct unwinder, list);
+	if (best == curr_unwinder)
+		return NULL;
+
+	return best;
+}
+
+/*
+ * Enqueue the stack unwinder sorted by rating.
+ */
+static int unwinder_enqueue(struct unwinder *ops)
+{
+	struct list_head *tmp, *entry = &unwinder_list;
+
+	list_for_each(tmp, &unwinder_list) {
+		struct unwinder *o;
+
+		o = list_entry(tmp, struct unwinder, list);
+		if (o == ops)
+			return -EBUSY;
+		/* Keep track of the place, where to insert */
+		if (o->rating >= ops->rating)
+			entry = tmp;
+	}
+	list_add(&ops->list, entry);
+
+	return 0;
+}
+
+/**
+ * unwinder_register - Used to install new stack unwinder
+ * @u: unwinder to be registered
+ *
+ * Install the new stack unwinder on the unwinder list, which is sorted
+ * by rating.
+ *
+ * Returns -EBUSY if registration fails, zero otherwise.
+ */
+int unwinder_register(struct unwinder *u)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&unwinder_lock, flags);
+	ret = unwinder_enqueue(u);
+	if (!ret)
+		curr_unwinder = select_unwinder();
+	spin_unlock_irqrestore(&unwinder_lock, flags);
+
+	return ret;
+}
+
+int unwinder_faulted = 0;
+
+/*
+ * Unwind the call stack and pass information to the stacktrace_ops
+ * functions. Also handle the case where we need to switch to a new
+ * stack dumper because the current one faulted unexpectedly.
+ */
+void unwind_stack(struct task_struct *task, struct pt_regs *regs,
+		  unsigned long *sp, const struct stacktrace_ops *ops,
+		  void *data)
+{
+	unsigned long flags;
+
+	/*
+	 * The problem with unwinders with high ratings is that they are
+	 * inherently more complicated than the simple ones with lower
+	 * ratings. We are therefore more likely to fault in the
+	 * complicated ones, e.g. hitting BUG()s. If we fault in the
+	 * code for the current stack unwinder we try to downgrade to
+	 * one with a lower rating.
+	 *
+	 * Hopefully this will give us a semi-reliable stacktrace so we
+	 * can diagnose why curr_unwinder->dump() faulted.
+	 */
+	if (unwinder_faulted) {
+		spin_lock_irqsave(&unwinder_lock, flags);
+
+		/* Make sure no one beat us to changing the unwinder */
+		if (unwinder_faulted && !list_is_singular(&unwinder_list)) {
+			list_del(&curr_unwinder->list);
+			curr_unwinder = select_unwinder();
+
+			unwinder_faulted = 0;
+		}
+
+		spin_unlock_irqrestore(&unwinder_lock, flags);
+	}
+
+	curr_unwinder->dump(task, regs, sp, ops, data);
+}
+EXPORT_SYMBOL_GPL(unwind_stack);
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/vmlinux.lds.S b/src/kernel/linux/v4.14/arch/sh/kernel/vmlinux.lds.S
new file mode 100644
index 0000000..77a59d8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/vmlinux.lds.S
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ld script to make SuperH Linux kernel
+ * Written by Niibe Yutaka and Paul Mundt
+ */
+#ifdef CONFIG_SUPERH64
+#define LOAD_OFFSET	PAGE_OFFSET
+OUTPUT_ARCH(sh:sh5)
+#else
+#define LOAD_OFFSET	0
+OUTPUT_ARCH(sh)
+#endif
+
+#include <asm/thread_info.h>
+#include <asm/cache.h>
+#include <asm/vmlinux.lds.h>
+
+#ifdef CONFIG_PMB
+ #define MEMORY_OFFSET	0
+#else
+ #define MEMORY_OFFSET	__MEMORY_START
+#endif
+
+ENTRY(_start)
+SECTIONS
+{
+	. = PAGE_OFFSET + MEMORY_OFFSET + PHYSICAL_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
+
+	_text = .;		/* Text and read-only data */
+
+	.empty_zero_page : AT(ADDR(.empty_zero_page) - LOAD_OFFSET) {
+		*(.empty_zero_page)
+	} = 0
+
+	.text : AT(ADDR(.text) - LOAD_OFFSET) {
+		HEAD_TEXT
+		TEXT_TEXT
+		EXTRA_TEXT
+		SCHED_TEXT
+		CPUIDLE_TEXT
+		LOCK_TEXT
+		KPROBES_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
+		*(.fixup)
+		*(.gnu.warning)
+		_etext = .;		/* End of text section */
+	} = 0x0009
+
+	EXCEPTION_TABLE(16)
+	NOTES
+
+	_sdata = .;
+	RO_DATA(PAGE_SIZE)
+	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+	_edata = .;
+
+	DWARF_EH_FRAME
+
+	. = ALIGN(PAGE_SIZE);		/* Init code and data */
+	__init_begin = .;
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
+
+	. = ALIGN(4);
+	.machvec.init : AT(ADDR(.machvec.init) - LOAD_OFFSET) {
+		__machvec_start = .;
+		*(.machvec.init)
+		__machvec_end = .;
+	}
+
+	PERCPU_SECTION(L1_CACHE_BYTES)
+
+	/*
+	 * .exit.text is discarded at runtime, not link time, to deal with
+	 * references from __bug_table
+	 */
+	.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { EXIT_TEXT }
+	.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { EXIT_DATA }
+
+	. = ALIGN(PAGE_SIZE);
+	__init_end = .;
+	BSS_SECTION(0, PAGE_SIZE, 4)
+	_end = . ;
+
+	STABS_DEBUG
+	DWARF_DEBUG
+
+	DISCARDS
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/.gitignore b/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/.gitignore
new file mode 100644
index 0000000..40836ad
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/.gitignore
@@ -0,0 +1 @@
+vsyscall.lds
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/Makefile b/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/Makefile
new file mode 100644
index 0000000..5db6579
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/Makefile
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y += vsyscall.o vsyscall-syscall.o vsyscall-syms.o
+
+$(obj)/vsyscall-syscall.o: \
+	$(foreach F,trapa,$(obj)/vsyscall-$F.so)
+
+# Teach kbuild about targets
+targets += $(foreach F,trapa,vsyscall-$F.o vsyscall-$F.so)
+targets += vsyscall-note.o vsyscall.lds vsyscall-dummy.o
+
+# The DSO images are built using a special linker script
+quiet_cmd_syscall = SYSCALL $@
+      cmd_syscall = $(CC) -nostdlib $(SYSCFLAGS_$(@F)) \
+			   -Wl,-T,$(filter-out FORCE,$^) -o $@
+
+export CPPFLAGS_vsyscall.lds += -P -C -Ush
+
+vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
+		$(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
+
+SYSCFLAGS_vsyscall-trapa.so	= $(vsyscall-flags)
+
+$(obj)/vsyscall-trapa.so: \
+$(obj)/vsyscall-%.so: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE
+	$(call if_changed,syscall)
+
+# We also create a special relocatable object that should mirror the symbol
+# table and layout of the linked DSO.  With ld -R we can then refer to
+# these symbols in the kernel code rather than hand-coded addresses.
+SYSCFLAGS_vsyscall-dummy.o = -r
+$(obj)/vsyscall-dummy.o: $(src)/vsyscall.lds \
+			$(obj)/vsyscall-trapa.o $(obj)/vsyscall-note.o FORCE
+	$(call if_changed,syscall)
+
+LDFLAGS_vsyscall-syms.o := -r -R
+$(obj)/vsyscall-syms.o: $(obj)/vsyscall-dummy.o FORCE
+	$(call if_changed,ld)
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall-note.S b/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall-note.S
new file mode 100644
index 0000000..bb35091
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall-note.S
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text.
+ * Here we can supply some information useful to userland.
+ */
+
+#include <linux/uts.h>
+#include <linux/version.h>
+
+#define ASM_ELF_NOTE_BEGIN(name, flags, vendor, type)			      \
+	.section name, flags;						      \
+	.balign 4;							      \
+	.long 1f - 0f;		/* name length */			      \
+	.long 3f - 2f;		/* data length */			      \
+	.long type;		/* note type */				      \
+0:	.asciz vendor;		/* vendor name */			      \
+1:	.balign 4;							      \
+2:
+
+#define ASM_ELF_NOTE_END						      \
+3:	.balign 4;		/* pad out section */			      \
+	.previous
+
+	ASM_ELF_NOTE_BEGIN(".note.kernel-version", "a", UTS_SYSNAME, 0)
+	.long LINUX_VERSION_CODE
+	ASM_ELF_NOTE_END
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S b/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S
new file mode 100644
index 0000000..bece5fa
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <asm/unistd.h>
+
+	.text
+	.balign 32
+	.globl __kernel_sigreturn
+	.type __kernel_sigreturn,@function
+__kernel_sigreturn:
+.LSTART_sigreturn:
+	mov.w	1f, r3
+	trapa	#0x10
+	or	r0, r0
+	or	r0, r0
+	or	r0, r0
+	or	r0, r0
+	or	r0, r0
+
+1:	.short	__NR_sigreturn
+.LEND_sigreturn:
+	.size __kernel_sigreturn,.-.LSTART_sigreturn
+
+	.balign 32
+	.globl __kernel_rt_sigreturn
+	.type __kernel_rt_sigreturn,@function
+__kernel_rt_sigreturn:
+.LSTART_rt_sigreturn:
+	mov.w	1f, r3
+	trapa	#0x10
+	or	r0, r0
+	or	r0, r0
+	or	r0, r0
+	or	r0, r0
+	or	r0, r0
+
+1:	.short	__NR_rt_sigreturn
+.LEND_rt_sigreturn:
+	.size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn
+	.previous
+
+	.section .eh_frame,"a",@progbits
+.LCIE1:
+	.ualong	.LCIE1_end - .LCIE1_start
+.LCIE1_start:
+	.ualong	0		/* CIE ID */
+	.byte	0x1		/* Version number */
+	.string	"zRS"		/* NUL-terminated augmentation string */
+	.uleb128 0x1		/* Code alignment factor */
+	.sleb128 -4		/* Data alignment factor */
+	.byte	0x11		/* Return address register column */
+	.uleb128 0x1		/* Augmentation length and data */
+	.byte 0x1b              /* DW_EH_PE_pcrel | DW_EH_PE_sdata4. */
+	.byte	0xc, 0xf, 0x0	/* DW_CFA_def_cfa: r15 ofs 0 */
+
+	.align 2
+.LCIE1_end:
+
+	.ualong	.LFDE0_end-.LFDE0_start	/* Length FDE0 */
+.LFDE0_start:
+	.ualong	.LFDE0_start-.LCIE1	/* CIE pointer */
+	.ualong	.LSTART_sigreturn-.	/* PC-relative start address */
+	.ualong	.LEND_sigreturn-.LSTART_sigreturn
+	.uleb128 0			/* Augmentation */
+	.align 2
+.LFDE0_end:
+
+	.ualong	.LFDE1_end-.LFDE1_start	/* Length FDE1 */
+.LFDE1_start:
+	.ualong	.LFDE1_start-.LCIE1	/* CIE pointer */
+	.ualong	.LSTART_rt_sigreturn-.	/* PC-relative start address */
+	.ualong	.LEND_rt_sigreturn-.LSTART_rt_sigreturn
+	.uleb128 0			/* Augmentation */
+	.align 2
+.LFDE1_end:
+
+	.previous
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall-syscall.S b/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall-syscall.S
new file mode 100644
index 0000000..2aeaa2d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall-syscall.S
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/init.h>
+
+__INITDATA
+
+	.globl vsyscall_trapa_start, vsyscall_trapa_end
+vsyscall_trapa_start:
+	.incbin "arch/sh/kernel/vsyscall/vsyscall-trapa.so"
+vsyscall_trapa_end:
+
+__FINIT
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall-trapa.S b/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall-trapa.S
new file mode 100644
index 0000000..854ea32
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall-trapa.S
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+	.text
+	.globl __kernel_vsyscall
+	.type __kernel_vsyscall,@function
+__kernel_vsyscall:
+.LSTART_vsyscall:
+	trapa	#0x10
+	 nop
+.LEND_vsyscall:
+	.size __kernel_vsyscall,.-.LSTART_vsyscall
+	.previous
+
+	.section .eh_frame,"a",@progbits
+.LCIE:
+	.ualong	.LCIE_end - .LCIE_start
+.LCIE_start:
+	.ualong	0		/* CIE ID */
+	.byte	0x1		/* Version number */
+	.string	"zR"		/* NUL-terminated augmentation string */
+	.uleb128 0x1		/* Code alignment factor */
+	.sleb128 -4		/* Data alignment factor */
+	.byte	0x11		/* Return address register column */
+	.uleb128 0x1		/* Augmentation length and data */
+	.byte 0x1b              /* DW_EH_PE_pcrel | DW_EH_PE_sdata4. */
+	.byte	0xc,0xf,0x0	/* DW_CFA_def_cfa: r15 ofs 0 */
+	.align 2
+.LCIE_end:
+
+	.ualong	.LFDE_end-.LFDE_start	/* Length FDE */
+.LFDE_start:
+	.ualong	.LFDE_start-.LCIE	/* CIE pointer */
+	.ualong	.LSTART_vsyscall-.	/* PC-relative start address */
+	.ualong	.LEND_vsyscall-.LSTART_vsyscall
+	.uleb128 0			/* Augmentation */
+	.align 2
+.LFDE_end:
+	.previous
+
+/* Get the common code for the sigreturn entry points */
+#include "vsyscall-sigreturn.S"
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall.c b/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall.c
new file mode 100644
index 0000000..cc0cc5b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall.c
@@ -0,0 +1,96 @@
+/*
+ * arch/sh/kernel/vsyscall/vsyscall.c
+ *
+ *  Copyright (C) 2006 Paul Mundt
+ *
+ * vDSO randomization
+ * Copyright(C) 2005-2006, Red Hat, Inc., Ingo Molnar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/elf.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+
+/*
+ * Should the kernel map a VDSO page into processes and pass its
+ * address down to glibc upon exec()?
+ */
+unsigned int __read_mostly vdso_enabled = 1;
+EXPORT_SYMBOL_GPL(vdso_enabled);
+
+static int __init vdso_setup(char *s)
+{
+	vdso_enabled = simple_strtoul(s, NULL, 0);
+	return 1;
+}
+__setup("vdso=", vdso_setup);
+
+/*
+ * These symbols are defined by vsyscall.o to mark the bounds
+ * of the ELF DSO images included therein.
+ */
+extern const char vsyscall_trapa_start, vsyscall_trapa_end;
+static struct page *syscall_pages[1];
+
+int __init vsyscall_init(void)
+{
+	void *syscall_page = (void *)get_zeroed_page(GFP_ATOMIC);
+	syscall_pages[0] = virt_to_page(syscall_page);
+
+	/*
+	 * XXX: Map this page to a fixmap entry if we get around
+	 * to adding the page to ELF core dumps
+	 */
+
+	memcpy(syscall_page,
+	       &vsyscall_trapa_start,
+	       &vsyscall_trapa_end - &vsyscall_trapa_start);
+
+	return 0;
+}
+
+/* Setup a VMA at program startup for the vsyscall page */
+int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr;
+	int ret;
+
+	if (down_write_killable(&mm->mmap_sem))
+		return -EINTR;
+
+	addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0);
+	if (IS_ERR_VALUE(addr)) {
+		ret = addr;
+		goto up_fail;
+	}
+
+	ret = install_special_mapping(mm, addr, PAGE_SIZE,
+				      VM_READ | VM_EXEC |
+				      VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
+				      syscall_pages);
+	if (unlikely(ret))
+		goto up_fail;
+
+	current->mm->context.vdso = (void *)addr;
+
+up_fail:
+	up_write(&mm->mmap_sem);
+	return ret;
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+	if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
+		return "[vdso]";
+
+	return NULL;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall.lds.S b/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall.lds.S
new file mode 100644
index 0000000..e3582e0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/kernel/vsyscall/vsyscall.lds.S
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Linker script for vsyscall DSO.  The vsyscall page is an ELF shared
+ * object prelinked to its virtual address, and with only one read-only
+ * segment (that fits in one page).  This script controls its layout.
+ */
+#include <asm/asm-offsets.h>
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+#else
+OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-shbig-linux")
+#endif
+OUTPUT_ARCH(sh)
+
+/* The ELF entry point can be used to set the AT_SYSINFO value.  */
+ENTRY(__kernel_vsyscall);
+
+SECTIONS
+{
+	. = SIZEOF_HEADERS;
+
+	.hash		: { *(.hash) }			:text
+	.gnu.hash	: { *(.gnu.hash) }
+	.dynsym		: { *(.dynsym) }
+	.dynstr		: { *(.dynstr) }
+	.gnu.version	: { *(.gnu.version) }
+	.gnu.version_d	: { *(.gnu.version_d) }
+	.gnu.version_r	: { *(.gnu.version_r) }
+
+	/*
+	 * This linker script is used both with -r and with -shared.
+	 * For the layouts to match, we need to skip more than enough
+	 * space for the dynamic symbol table et al.  If this amount
+	 * is insufficient, ld -shared will barf.  Just increase it here.
+	 */
+	. = 0x400;
+
+	.text		: { *(.text) } 			:text	=0x90909090
+	.note		: { *(.note.*) }		:text	:note
+	.eh_frame_hdr	: { *(.eh_frame_hdr ) }		:text	:eh_frame_hdr
+	.eh_frame	: {
+		KEEP (*(.eh_frame))
+		LONG (0)
+	}						:text
+	.dynamic	: { *(.dynamic) }		:text	:dynamic
+	.useless	: {
+	      *(.got.plt) *(.got)
+	      *(.data .data.* .gnu.linkonce.d.*)
+	      *(.dynbss)
+	      *(.bss .bss.* .gnu.linkonce.b.*)
+	}						:text
+}
+
+/*
+ * Very old versions of ld do not recognize this name token; use the constant.
+ */
+#define PT_GNU_EH_FRAME	0x6474e550
+
+/*
+ * We must supply the ELF program headers explicitly to get just one
+ * PT_LOAD segment, and set the flags explicitly to make segments read-only.
+ */
+PHDRS
+{
+	text		PT_LOAD FILEHDR PHDRS FLAGS(5);	/* PF_R|PF_X */
+	dynamic		PT_DYNAMIC FLAGS(4);		/* PF_R */
+	note		PT_NOTE FLAGS(4);		/* PF_R */
+	eh_frame_hdr	PT_GNU_EH_FRAME;
+}
+
+/*
+ * This controls what symbols we export from the DSO.
+ */
+VERSION
+{
+	LINUX_2.6 {
+	global:
+		__kernel_vsyscall;
+		__kernel_sigreturn;
+		__kernel_rt_sigreturn;
+
+	local: *;
+	};
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/Makefile b/src/kernel/linux/v4.14/arch/sh/lib/Makefile
new file mode 100644
index 0000000..d0abbe5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/Makefile
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for SuperH-specific library files..
+#
+
+lib-y  = delay.o memmove.o memchr.o \
+	 checksum.o strlen.o div64.o div64-generic.o
+
+# Extracted from libgcc
+obj-y += movmem.o ashldi3.o ashrdi3.o lshrdi3.o \
+	 ashlsi3.o ashrsi3.o ashiftrt.o lshrsi3.o \
+	 udiv_qrnnd.o
+
+udivsi3-y			:= udivsi3_i4i-Os.o
+
+ifneq ($(CONFIG_CC_OPTIMIZE_FOR_SIZE),y)
+udivsi3-$(CONFIG_CPU_SH3)	:= udivsi3_i4i.o
+udivsi3-$(CONFIG_CPU_SH4)	:= udivsi3_i4i.o
+endif
+udivsi3-y			+= udivsi3.o
+
+obj-y				+= io.o
+
+memcpy-y			:= memcpy.o
+memcpy-$(CONFIG_CPU_SH4)	:= memcpy-sh4.o
+
+memset-y			:= memset.o
+memset-$(CONFIG_CPU_SH4)	:= memset-sh4.o
+
+lib-$(CONFIG_MMU)		+= copy_page.o __clear_user.o
+lib-$(CONFIG_MCOUNT)		+= mcount.o
+lib-y				+= $(memcpy-y) $(memset-y) $(udivsi3-y)
+
+ccflags-y := -Werror
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/__clear_user.S b/src/kernel/linux/v4.14/arch/sh/lib/__clear_user.S
new file mode 100644
index 0000000..0978606
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/__clear_user.S
@@ -0,0 +1,109 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * __clear_user_page, __clear_user, clear_page implementation of SuperH
+ *
+ * Copyright (C) 2001  Kaz Kojima
+ * Copyright (C) 2001, 2002  Niibe Yutaka
+ * Copyright (C) 2006  Paul Mundt
+ */
+#include <linux/linkage.h>
+#include <asm/page.h>
+
+ENTRY(__clear_user)
+	!
+	mov	#0, r0
+	mov	#0xffffffe0, r1
+	!
+	! r4..(r4+31)&~32 	   -------- not aligned	[ Area 0 ]
+	! (r4+31)&~32..(r4+r5)&~32 -------- aligned	[ Area 1 ]
+	! (r4+r5)&~32..r4+r5       -------- not aligned	[ Area 2 ]
+	!
+	! Clear area 0
+	mov	r4, r2
+	!
+	tst	r1, r5		! length < 32
+	bt	.Larea2		! skip to remainder
+	!
+	add	#31, r2
+	and	r1, r2
+	cmp/eq	r4, r2
+	bt	.Larea1
+	mov	r2, r3
+	sub	r4, r3
+	mov	r3, r7
+	mov	r4, r2
+	!
+.L0:	dt	r3
+0:	mov.b	r0, @r2
+	bf/s	.L0
+	 add	#1, r2
+	!
+	sub	r7, r5
+	mov	r2, r4
+.Larea1:
+	mov	r4, r3
+	add	r5, r3
+	and	r1, r3
+	cmp/hi	r2, r3
+	bf	.Larea2
+	!
+	! Clear area 1
+#if defined(CONFIG_CPU_SH4)
+1:	movca.l	r0, @r2
+#else
+1:	mov.l	r0, @r2
+#endif
+	add	#4, r2
+2:	mov.l	r0, @r2
+	add	#4, r2
+3:	mov.l	r0, @r2
+	add	#4, r2
+4:	mov.l	r0, @r2
+	add	#4, r2
+5:	mov.l	r0, @r2
+	add	#4, r2
+6:	mov.l	r0, @r2
+	add	#4, r2
+7:	mov.l	r0, @r2
+	add	#4, r2
+8:	mov.l	r0, @r2
+	add	#4, r2
+	cmp/hi	r2, r3
+	bt/s	1b
+	 nop
+	!
+	! Clear area 2
+.Larea2:
+	mov	r4, r3
+	add	r5, r3
+	cmp/hs	r3, r2
+	bt/s	.Ldone
+	 sub	r2, r3
+.L2:	dt	r3
+9:	mov.b	r0, @r2
+	bf/s	.L2
+	 add	#1, r2
+	!
+.Ldone:	rts
+	 mov	#0, r0	! return 0 as normal return
+
+	! return the number of bytes remained
+.Lbad_clear_user:
+	mov	r4, r0
+	add	r5, r0
+	rts
+	 sub	r2, r0
+
+.section __ex_table,"a"
+	.align 2
+	.long	0b, .Lbad_clear_user
+	.long	1b, .Lbad_clear_user
+	.long	2b, .Lbad_clear_user
+	.long	3b, .Lbad_clear_user
+	.long	4b, .Lbad_clear_user
+	.long	5b, .Lbad_clear_user
+	.long	6b, .Lbad_clear_user
+	.long	7b, .Lbad_clear_user
+	.long	8b, .Lbad_clear_user
+	.long	9b, .Lbad_clear_user
+.previous
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/ashiftrt.S b/src/kernel/linux/v4.14/arch/sh/lib/ashiftrt.S
new file mode 100644
index 0000000..45ce865
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/ashiftrt.S
@@ -0,0 +1,149 @@
+/* Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
+   2004, 2005, 2006
+   Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file.  (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING.  If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.  */
+
+!! libgcc routines for the Renesas / SuperH SH CPUs.
+!! Contributed by Steve Chamberlain.
+!! sac@cygnus.com
+
+!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
+!! recoded in assembly by Toshiyasu Morita
+!! tm@netcom.com
+
+/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
+   ELF local label prefixes by J"orn Rennecke
+   amylaar@cygnus.com  */
+
+	.global	__ashiftrt_r4_0
+	.global	__ashiftrt_r4_1
+	.global	__ashiftrt_r4_2
+	.global	__ashiftrt_r4_3
+	.global	__ashiftrt_r4_4
+	.global	__ashiftrt_r4_5
+	.global	__ashiftrt_r4_6
+	.global	__ashiftrt_r4_7
+	.global	__ashiftrt_r4_8
+	.global	__ashiftrt_r4_9
+	.global	__ashiftrt_r4_10
+	.global	__ashiftrt_r4_11
+	.global	__ashiftrt_r4_12
+	.global	__ashiftrt_r4_13
+	.global	__ashiftrt_r4_14
+	.global	__ashiftrt_r4_15
+	.global	__ashiftrt_r4_16
+	.global	__ashiftrt_r4_17
+	.global	__ashiftrt_r4_18
+	.global	__ashiftrt_r4_19
+	.global	__ashiftrt_r4_20
+	.global	__ashiftrt_r4_21
+	.global	__ashiftrt_r4_22
+	.global	__ashiftrt_r4_23
+	.global	__ashiftrt_r4_24
+	.global	__ashiftrt_r4_25
+	.global	__ashiftrt_r4_26
+	.global	__ashiftrt_r4_27
+	.global	__ashiftrt_r4_28
+	.global	__ashiftrt_r4_29
+	.global	__ashiftrt_r4_30
+	.global	__ashiftrt_r4_31
+	.global	__ashiftrt_r4_32
+
+	.align	1
+__ashiftrt_r4_32:
+__ashiftrt_r4_31:
+	rotcl	r4
+	rts
+	subc	r4,r4
+__ashiftrt_r4_30:
+	shar	r4
+__ashiftrt_r4_29:
+	shar	r4
+__ashiftrt_r4_28:
+	shar	r4
+__ashiftrt_r4_27:
+	shar	r4
+__ashiftrt_r4_26:
+	shar	r4
+__ashiftrt_r4_25:
+	shar	r4
+__ashiftrt_r4_24:
+	shlr16	r4
+	shlr8	r4
+	rts
+	exts.b	r4,r4
+__ashiftrt_r4_23:
+	shar	r4
+__ashiftrt_r4_22:
+	shar	r4
+__ashiftrt_r4_21:
+	shar	r4
+__ashiftrt_r4_20:
+	shar	r4
+__ashiftrt_r4_19:
+	shar	r4
+__ashiftrt_r4_18:
+	shar	r4
+__ashiftrt_r4_17:
+	shar	r4
+__ashiftrt_r4_16:
+	shlr16	r4
+	rts
+	exts.w	r4,r4
+__ashiftrt_r4_15:
+	shar	r4
+__ashiftrt_r4_14:
+	shar	r4
+__ashiftrt_r4_13:
+	shar	r4
+__ashiftrt_r4_12:
+	shar	r4
+__ashiftrt_r4_11:
+	shar	r4
+__ashiftrt_r4_10:
+	shar	r4
+__ashiftrt_r4_9:
+	shar	r4
+__ashiftrt_r4_8:
+	shar	r4
+__ashiftrt_r4_7:
+	shar	r4
+__ashiftrt_r4_6:
+	shar	r4
+__ashiftrt_r4_5:
+	shar	r4
+__ashiftrt_r4_4:
+	shar	r4
+__ashiftrt_r4_3:
+	shar	r4
+__ashiftrt_r4_2:
+	shar	r4
+__ashiftrt_r4_1:
+	rts
+	shar	r4
+__ashiftrt_r4_0:
+	rts
+	nop
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/ashldi3.c b/src/kernel/linux/v4.14/arch/sh/lib/ashldi3.c
new file mode 100644
index 0000000..e5afe09
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/ashldi3.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/module.h>
+
+#include "libgcc.h"
+
+long long __ashldi3(long long u, word_type b)
+{
+	DWunion uu, w;
+	word_type bm;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+	bm = 32 - b;
+
+	if (bm <= 0) {
+		w.s.low = 0;
+		w.s.high = (unsigned int) uu.s.low << -bm;
+	} else {
+		const unsigned int carries = (unsigned int) uu.s.low >> bm;
+
+		w.s.low = (unsigned int) uu.s.low << b;
+		w.s.high = ((unsigned int) uu.s.high << b) | carries;
+	}
+
+	return w.ll;
+}
+
+EXPORT_SYMBOL(__ashldi3);
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/ashlsi3.S b/src/kernel/linux/v4.14/arch/sh/lib/ashlsi3.S
new file mode 100644
index 0000000..70a6434
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/ashlsi3.S
@@ -0,0 +1,210 @@
+/* Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
+   2004, 2005, 2006
+   Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file.  (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING.  If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.  */
+
+!! libgcc routines for the Renesas / SuperH SH CPUs.
+!! Contributed by Steve Chamberlain.
+!! sac@cygnus.com
+
+!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
+!! recoded in assembly by Toshiyasu Morita
+!! tm@netcom.com
+
+/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
+   ELF local label prefixes by J"orn Rennecke
+   amylaar@cygnus.com  */
+
+!
+! __ashlsi3
+!
+! Entry:
+!
+! r4: Value to shift
+! r5: Shifts
+!
+! Exit:
+!
+! r0: Result
+!
+! Destroys:
+!
+! (none)
+!
+! __ashlsi3_r0
+!
+! Entry:
+!
+! r4: Value to shift
+! r0: Shifts
+!
+! Exit:
+!
+! r0: Result
+!
+! Destroys:
+!
+! (none)
+
+
+	.global	__ashlsi3
+	.global	__ashlsi3_r0
+	
+	.align	2
+__ashlsi3:
+	mov	r5,r0
+	.align	2
+__ashlsi3_r0:
+	and	#31,r0
+	mov.l	r4,@-r15
+	mov	r0,r4
+	mova	ashlsi3_table,r0
+	mov.b	@(r0,r4),r4
+	add	r4,r0
+	jmp	@r0
+	mov.l	@r15+,r0
+
+	.align	2
+ashlsi3_table:
+	.byte		ashlsi3_0-ashlsi3_table
+	.byte		ashlsi3_1-ashlsi3_table
+	.byte		ashlsi3_2-ashlsi3_table
+	.byte		ashlsi3_3-ashlsi3_table
+	.byte		ashlsi3_4-ashlsi3_table
+	.byte		ashlsi3_5-ashlsi3_table
+	.byte		ashlsi3_6-ashlsi3_table
+	.byte		ashlsi3_7-ashlsi3_table
+	.byte		ashlsi3_8-ashlsi3_table
+	.byte		ashlsi3_9-ashlsi3_table
+	.byte		ashlsi3_10-ashlsi3_table
+	.byte		ashlsi3_11-ashlsi3_table
+	.byte		ashlsi3_12-ashlsi3_table
+	.byte		ashlsi3_13-ashlsi3_table
+	.byte		ashlsi3_14-ashlsi3_table
+	.byte		ashlsi3_15-ashlsi3_table
+	.byte		ashlsi3_16-ashlsi3_table
+	.byte		ashlsi3_17-ashlsi3_table
+	.byte		ashlsi3_18-ashlsi3_table
+	.byte		ashlsi3_19-ashlsi3_table
+	.byte		ashlsi3_20-ashlsi3_table
+	.byte		ashlsi3_21-ashlsi3_table
+	.byte		ashlsi3_22-ashlsi3_table
+	.byte		ashlsi3_23-ashlsi3_table
+	.byte		ashlsi3_24-ashlsi3_table
+	.byte		ashlsi3_25-ashlsi3_table
+	.byte		ashlsi3_26-ashlsi3_table
+	.byte		ashlsi3_27-ashlsi3_table
+	.byte		ashlsi3_28-ashlsi3_table
+	.byte		ashlsi3_29-ashlsi3_table
+	.byte		ashlsi3_30-ashlsi3_table
+	.byte		ashlsi3_31-ashlsi3_table
+
+ashlsi3_6:
+	shll2	r0
+ashlsi3_4:
+	shll2	r0
+ashlsi3_2:
+	rts
+	shll2	r0
+
+ashlsi3_7:
+	shll2	r0
+ashlsi3_5:
+	shll2	r0
+ashlsi3_3:
+	shll2	r0
+ashlsi3_1:
+	rts
+	shll	r0
+
+ashlsi3_14:
+	shll2	r0
+ashlsi3_12:
+	shll2	r0
+ashlsi3_10:
+	shll2	r0
+ashlsi3_8:
+	rts
+	shll8	r0
+
+ashlsi3_15:
+	shll2	r0
+ashlsi3_13:
+	shll2	r0
+ashlsi3_11:
+	shll2	r0
+ashlsi3_9:
+	shll8	r0
+	rts
+	shll	r0
+
+ashlsi3_22:
+	shll2	r0
+ashlsi3_20:
+	shll2	r0
+ashlsi3_18:
+	shll2	r0
+ashlsi3_16:
+	rts
+	shll16	r0
+
+ashlsi3_23:
+	shll2	r0
+ashlsi3_21:
+	shll2	r0
+ashlsi3_19:
+	shll2	r0
+ashlsi3_17:
+	shll16	r0
+	rts
+	shll	r0
+
+ashlsi3_30:
+	shll2	r0
+ashlsi3_28:
+	shll2	r0
+ashlsi3_26:
+	shll2	r0
+ashlsi3_24:
+	shll16	r0
+	rts
+	shll8	r0
+
+ashlsi3_31:
+	shll2	r0
+ashlsi3_29:
+	shll2	r0
+ashlsi3_27:
+	shll2	r0
+ashlsi3_25:
+	shll16	r0
+	shll8	r0
+	rts
+	shll	r0
+
+ashlsi3_0:
+	rts
+	nop
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/ashrdi3.c b/src/kernel/linux/v4.14/arch/sh/lib/ashrdi3.c
new file mode 100644
index 0000000..ae263fb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/ashrdi3.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/module.h>
+
+#include "libgcc.h"
+
+long long __ashrdi3(long long u, word_type b)
+{
+	DWunion uu, w;
+	word_type bm;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+	bm = 32 - b;
+
+	if (bm <= 0) {
+		/* w.s.high = 1..1 or 0..0 */
+		w.s.high =
+		    uu.s.high >> 31;
+		w.s.low = uu.s.high >> -bm;
+	} else {
+		const unsigned int carries = (unsigned int) uu.s.high << bm;
+
+		w.s.high = uu.s.high >> b;
+		w.s.low = ((unsigned int) uu.s.low >> b) | carries;
+	}
+
+	return w.ll;
+}
+
+EXPORT_SYMBOL(__ashrdi3);
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/ashrsi3.S b/src/kernel/linux/v4.14/arch/sh/lib/ashrsi3.S
new file mode 100644
index 0000000..602599d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/ashrsi3.S
@@ -0,0 +1,200 @@
+/* Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
+   2004, 2005, 2006
+   Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file.  (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING.  If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.  */
+
+!! libgcc routines for the Renesas / SuperH SH CPUs.
+!! Contributed by Steve Chamberlain.
+!! sac@cygnus.com
+
+!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
+!! recoded in assembly by Toshiyasu Morita
+!! tm@netcom.com
+
+/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
+   ELF local label prefixes by J"orn Rennecke
+   amylaar@cygnus.com  */
+
+!
+! __ashrsi3
+!
+! Entry:
+!
+! r4: Value to shift
+! r5: Shifts
+!
+! Exit:
+!
+! r0: Result
+!
+! Destroys:
+!
+! (none)
+!
+! __ashrsi3_r0
+!
+! Entry:
+!
+! r4: Value to shift
+! r0: Shifts
+!
+! Exit:
+!
+! r0: Result
+!
+! Destroys:
+!
+! (none)
+
+	.global	__ashrsi3
+	.global	__ashrsi3_r0
+	
+	.align	2
+__ashrsi3:
+	mov	r5,r0
+	.align	2
+__ashrsi3_r0:
+	and	#31,r0
+	mov.l	r4,@-r15
+	mov	r0,r4
+	mova	ashrsi3_table,r0
+	mov.b	@(r0,r4),r4
+	add	r4,r0
+	jmp	@r0
+	mov.l	@r15+,r0
+
+	.align	2
+ashrsi3_table:
+	.byte		ashrsi3_0-ashrsi3_table
+	.byte		ashrsi3_1-ashrsi3_table
+	.byte		ashrsi3_2-ashrsi3_table
+	.byte		ashrsi3_3-ashrsi3_table
+	.byte		ashrsi3_4-ashrsi3_table
+	.byte		ashrsi3_5-ashrsi3_table
+	.byte		ashrsi3_6-ashrsi3_table
+	.byte		ashrsi3_7-ashrsi3_table
+	.byte		ashrsi3_8-ashrsi3_table
+	.byte		ashrsi3_9-ashrsi3_table
+	.byte		ashrsi3_10-ashrsi3_table
+	.byte		ashrsi3_11-ashrsi3_table
+	.byte		ashrsi3_12-ashrsi3_table
+	.byte		ashrsi3_13-ashrsi3_table
+	.byte		ashrsi3_14-ashrsi3_table
+	.byte		ashrsi3_15-ashrsi3_table
+	.byte		ashrsi3_16-ashrsi3_table
+	.byte		ashrsi3_17-ashrsi3_table
+	.byte		ashrsi3_18-ashrsi3_table
+	.byte		ashrsi3_19-ashrsi3_table
+	.byte		ashrsi3_20-ashrsi3_table
+	.byte		ashrsi3_21-ashrsi3_table
+	.byte		ashrsi3_22-ashrsi3_table
+	.byte		ashrsi3_23-ashrsi3_table
+	.byte		ashrsi3_24-ashrsi3_table
+	.byte		ashrsi3_25-ashrsi3_table
+	.byte		ashrsi3_26-ashrsi3_table
+	.byte		ashrsi3_27-ashrsi3_table
+	.byte		ashrsi3_28-ashrsi3_table
+	.byte		ashrsi3_29-ashrsi3_table
+	.byte		ashrsi3_30-ashrsi3_table
+	.byte		ashrsi3_31-ashrsi3_table
+
+ashrsi3_31:
+	rotcl	r0
+	rts
+	subc	r0,r0
+
+ashrsi3_30:
+	shar	r0
+ashrsi3_29:
+	shar	r0
+ashrsi3_28:
+	shar	r0
+ashrsi3_27:
+	shar	r0
+ashrsi3_26:
+	shar	r0
+ashrsi3_25:
+	shar	r0
+ashrsi3_24:
+	shlr16	r0
+	shlr8	r0
+	rts
+	exts.b	r0,r0
+
+ashrsi3_23:
+	shar	r0
+ashrsi3_22:
+	shar	r0
+ashrsi3_21:
+	shar	r0
+ashrsi3_20:
+	shar	r0
+ashrsi3_19:
+	shar	r0
+ashrsi3_18:
+	shar	r0
+ashrsi3_17:
+	shar	r0
+ashrsi3_16:
+	shlr16	r0
+	rts
+	exts.w	r0,r0
+
+ashrsi3_15:
+	shar	r0
+ashrsi3_14:
+	shar	r0
+ashrsi3_13:
+	shar	r0
+ashrsi3_12:
+	shar	r0
+ashrsi3_11:
+	shar	r0
+ashrsi3_10:
+	shar	r0
+ashrsi3_9:
+	shar	r0
+ashrsi3_8:
+	shar	r0
+ashrsi3_7:
+	shar	r0
+ashrsi3_6:
+	shar	r0
+ashrsi3_5:
+	shar	r0
+ashrsi3_4:
+	shar	r0
+ashrsi3_3:
+	shar	r0
+ashrsi3_2:
+	shar	r0
+ashrsi3_1:
+	rts
+	shar	r0
+
+ashrsi3_0:
+	rts
+	nop
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/checksum.S b/src/kernel/linux/v4.14/arch/sh/lib/checksum.S
new file mode 100644
index 0000000..356c8ec
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/checksum.S
@@ -0,0 +1,417 @@
+/* $Id: checksum.S,v 1.10 2001/07/06 13:11:32 gniibe Exp $
+ *
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		IP/TCP/UDP checksumming routines
+ *
+ * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
+ *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
+ *		Tom May, <ftom@netcom.com>
+ *              Pentium Pro/II routines:
+ *              Alexander Kjeldaas <astor@guardian.no>
+ *              Finn Arne Gangstad <finnag@guardian.no>
+ *		Lots of code moved from tcp.c and ip.c; see those files
+ *		for more names.
+ *
+ * Changes:     Ingo Molnar, converted csum_partial_copy() to 2.1 exception
+ *			     handling.
+ *		Andi Kleen,  add zeroing on error
+ *                   converted to pure assembler
+ *
+ * SuperH version:  Copyright (C) 1999  Niibe Yutaka
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/errno.h>
+#include <linux/linkage.h>
+
+/*
+ * computes a partial checksum, e.g. for TCP/UDP fragments
+ */
+
+/*	
+ * asmlinkage __wsum csum_partial(const void *buf, int len, __wsum sum);
+ */
+
+.text
+ENTRY(csum_partial)
+	  /*
+	   * Experiments with Ethernet and SLIP connections show that buff
+	   * is aligned on either a 2-byte or 4-byte boundary.  We get at
+	   * least a twofold speedup on 486 and Pentium if it is 4-byte aligned.
+	   * Fortunately, it is easy to convert 2-byte alignment to 4-byte
+	   * alignment for the unrolled loop.
+	   */
+	mov	r4, r0
+	tst	#3, r0		! Check alignment.
+	bt/s	2f		! Jump if alignment is ok.
+	 mov	r4, r7		! Keep a copy to check for alignment
+	!
+	tst	#1, r0		! Check alignment.
+	bt	21f		! Jump if alignment is boundary of 2bytes.
+
+	! buf is odd
+	tst	r5, r5
+	add	#-1, r5
+	bt	9f
+	mov.b	@r4+, r0
+	extu.b	r0, r0
+	addc	r0, r6		! t=0 from previous tst
+	mov	r6, r0
+	shll8	r6
+	shlr16	r0
+	shlr8	r0
+	or	r0, r6
+	mov	r4, r0
+	tst	#2, r0
+	bt	2f
+21:
+	! buf is 2 byte aligned (len could be 0)
+	add	#-2, r5		! Alignment uses up two bytes.
+	cmp/pz	r5		!
+	bt/s	1f		! Jump if we had at least two bytes.
+	 clrt
+	bra	6f
+	 add	#2, r5		! r5 was < 2.  Deal with it.
+1:
+	mov.w	@r4+, r0
+	extu.w	r0, r0
+	addc	r0, r6
+	bf	2f
+	add	#1, r6
+2:
+	! buf is 4 byte aligned (len could be 0)
+	mov	r5, r1
+	mov	#-5, r0
+	shld	r0, r1
+	tst	r1, r1
+	bt/s	4f		! if it's =0, go to 4f
+	 clrt
+	.align	2
+3:
+	mov.l	@r4+, r0
+	mov.l	@r4+, r2
+	mov.l	@r4+, r3
+	addc	r0, r6
+	mov.l	@r4+, r0
+	addc	r2, r6
+	mov.l	@r4+, r2
+	addc	r3, r6
+	mov.l	@r4+, r3
+	addc	r0, r6
+	mov.l	@r4+, r0
+	addc	r2, r6
+	mov.l	@r4+, r2
+	addc	r3, r6
+	addc	r0, r6
+	addc	r2, r6
+	movt	r0
+	dt	r1
+	bf/s	3b
+	 cmp/eq	#1, r0
+	! here, we know r1==0
+	addc	r1, r6			! add carry to r6
+4:
+	mov	r5, r0
+	and	#0x1c, r0
+	tst	r0, r0
+	bt	6f
+	! 4 bytes or more remaining
+	mov	r0, r1
+	shlr2	r1
+	mov	#0, r2
+5:
+	addc	r2, r6
+	mov.l	@r4+, r2
+	movt	r0
+	dt	r1
+	bf/s	5b
+	 cmp/eq	#1, r0
+	addc	r2, r6
+	addc	r1, r6		! r1==0 here, so it means add carry-bit
+6:
+	! 3 bytes or less remaining
+	mov	#3, r0
+	and	r0, r5
+	tst	r5, r5
+	bt	9f		! if it's =0 go to 9f
+	mov	#2, r1
+	cmp/hs  r1, r5
+	bf	7f
+	mov.w	@r4+, r0
+	extu.w	r0, r0
+	cmp/eq	r1, r5
+	bt/s	8f
+	 clrt
+	shll16	r0
+	addc	r0, r6
+7:
+	mov.b	@r4+, r0
+	extu.b	r0, r0
+#ifndef	__LITTLE_ENDIAN__
+	shll8	r0
+#endif
+8:
+	addc	r0, r6
+	mov	#0, r0
+	addc	r0, r6
+9:
+	! Check if the buffer was misaligned, if so realign sum
+	mov	r7, r0
+	tst	#1, r0
+	bt	10f
+	mov	r6, r0
+	shll8	r6
+	shlr16	r0
+	shlr8	r0
+	or	r0, r6
+10:
+	rts
+	 mov	r6, r0
+
+/*
+unsigned int csum_partial_copy_generic (const char *src, char *dst, int len, 
+					int sum, int *src_err_ptr, int *dst_err_ptr)
+ */ 
+
+/*
+ * Copy from ds while checksumming, otherwise like csum_partial
+ *
+ * The macros SRC and DST specify the type of access for the instruction.
+ * thus we can call a custom exception handler for all access types.
+ *
+ * FIXME: could someone double-check whether I haven't mixed up some SRC and
+ *	  DST definitions? It's damn hard to trigger all cases.  I hope I got
+ *	  them all but there's no guarantee.
+ */
+
+#define SRC(...)			\
+	9999: __VA_ARGS__ ;		\
+	.section __ex_table, "a";	\
+	.long 9999b, 6001f	;	\
+	.previous
+
+#define DST(...)			\
+	9999: __VA_ARGS__ ;		\
+	.section __ex_table, "a";	\
+	.long 9999b, 6002f	;	\
+	.previous
+
+!
+! r4:	const char *SRC
+! r5:	char *DST
+! r6:	int LEN
+! r7:	int SUM
+!
+! on stack:
+! int *SRC_ERR_PTR
+! int *DST_ERR_PTR
+!
+ENTRY(csum_partial_copy_generic)
+	mov.l	r5,@-r15
+	mov.l	r6,@-r15
+
+	mov	#3,r0		! Check src and dest are equally aligned
+	mov	r4,r1
+	and	r0,r1
+	and	r5,r0
+	cmp/eq	r1,r0
+	bf	3f		! Different alignments, use slow version
+	tst	#1,r0		! Check dest word aligned
+	bf	3f		! If not, do it the slow way
+
+	mov	#2,r0
+	tst	r0,r5		! Check dest alignment. 
+	bt	2f		! Jump if alignment is ok.
+	add	#-2,r6		! Alignment uses up two bytes.
+	cmp/pz	r6		! Jump if we had at least two bytes.
+	bt/s	1f
+	 clrt
+	add	#2,r6		! r6 was < 2.	Deal with it.
+	bra	4f
+	 mov	r6,r2
+
+3:	! Handle different src and dest alignments.
+	! This is not common, so simple byte by byte copy will do.
+	mov	r6,r2
+	shlr	r6
+	tst	r6,r6
+	bt	4f
+	clrt
+	.align	2
+5:
+SRC(	mov.b	@r4+,r1 	)
+SRC(	mov.b	@r4+,r0		)
+	extu.b	r1,r1
+DST(	mov.b	r1,@r5		)
+DST(	mov.b	r0,@(1,r5)	)
+	extu.b	r0,r0
+	add	#2,r5
+
+#ifdef	__LITTLE_ENDIAN__
+	shll8	r0
+#else
+	shll8	r1
+#endif
+	or	r1,r0
+
+	addc	r0,r7
+	movt	r0
+	dt	r6
+	bf/s	5b
+	 cmp/eq	#1,r0
+	mov	#0,r0
+	addc	r0, r7
+
+	mov	r2, r0
+	tst	#1, r0
+	bt	7f
+	bra	5f
+	 clrt
+
+	! src and dest equally aligned, but to a two byte boundary.
+	! Handle first two bytes as a special case
+	.align	2
+1:	
+SRC(	mov.w	@r4+,r0		)
+DST(	mov.w	r0,@r5		)
+	add	#2,r5
+	extu.w	r0,r0
+	addc	r0,r7
+	mov	#0,r0
+	addc	r0,r7
+2:
+	mov	r6,r2
+	mov	#-5,r0
+	shld	r0,r6
+	tst	r6,r6
+	bt/s	2f
+	 clrt
+	.align	2
+1:	
+SRC(	mov.l	@r4+,r0		)
+SRC(	mov.l	@r4+,r1		)
+	addc	r0,r7
+DST(	mov.l	r0,@r5		)
+DST(	mov.l	r1,@(4,r5)	)
+	addc	r1,r7
+
+SRC(	mov.l	@r4+,r0		)
+SRC(	mov.l	@r4+,r1		)
+	addc	r0,r7
+DST(	mov.l	r0,@(8,r5)	)
+DST(	mov.l	r1,@(12,r5)	)
+	addc	r1,r7
+
+SRC(	mov.l	@r4+,r0 	)
+SRC(	mov.l	@r4+,r1		)
+	addc	r0,r7
+DST(	mov.l	r0,@(16,r5)	)
+DST(	mov.l	r1,@(20,r5)	)
+	addc	r1,r7
+
+SRC(	mov.l	@r4+,r0		)
+SRC(	mov.l	@r4+,r1		)
+	addc	r0,r7
+DST(	mov.l	r0,@(24,r5)	)
+DST(	mov.l	r1,@(28,r5)	)
+	addc	r1,r7
+	add	#32,r5
+	movt	r0
+	dt	r6
+	bf/s	1b
+	 cmp/eq	#1,r0
+	mov	#0,r0
+	addc	r0,r7
+
+2:	mov	r2,r6
+	mov	#0x1c,r0
+	and	r0,r6
+	cmp/pl	r6
+	bf/s	4f
+	 clrt
+	shlr2	r6
+3:	
+SRC(	mov.l	@r4+,r0	)
+	addc	r0,r7
+DST(	mov.l	r0,@r5	)
+	add	#4,r5
+	movt	r0
+	dt	r6
+	bf/s	3b
+	 cmp/eq	#1,r0
+	mov	#0,r0
+	addc	r0,r7
+4:	mov	r2,r6
+	mov	#3,r0
+	and	r0,r6
+	cmp/pl	r6
+	bf	7f
+	mov	#2,r1
+	cmp/hs	r1,r6
+	bf	5f
+SRC(	mov.w	@r4+,r0	)
+DST(	mov.w	r0,@r5	)
+	extu.w	r0,r0
+	add	#2,r5
+	cmp/eq	r1,r6
+	bt/s	6f
+	 clrt
+	shll16	r0
+	addc	r0,r7
+5:	
+SRC(	mov.b	@r4+,r0	)
+DST(	mov.b	r0,@r5	)
+	extu.b	r0,r0
+#ifndef	__LITTLE_ENDIAN__
+	shll8	r0
+#endif
+6:	addc	r0,r7
+	mov	#0,r0
+	addc	r0,r7
+7:
+5000:
+
+# Exception handler:
+.section .fixup, "ax"							
+
+6001:
+	mov.l	@(8,r15),r0			! src_err_ptr
+	mov	#-EFAULT,r1
+	mov.l	r1,@r0
+
+	! zero the complete destination - computing the rest
+	! is too much work 
+	mov.l	@(4,r15),r5		! dst
+	mov.l	@r15,r6			! len
+	mov	#0,r7
+1:	mov.b	r7,@r5
+	dt	r6
+	bf/s	1b
+	 add	#1,r5
+	mov.l	8000f,r0
+	jmp	@r0
+	 nop
+	.align	2
+8000:	.long	5000b
+
+6002:
+	mov.l	@(12,r15),r0			! dst_err_ptr
+	mov	#-EFAULT,r1
+	mov.l	r1,@r0
+	mov.l	8001f,r0
+	jmp	@r0
+	 nop
+	.align	2
+8001:	.long	5000b
+
+.previous
+	add	#8,r15
+	rts
+	 mov	r7,r0
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/copy_page.S b/src/kernel/linux/v4.14/arch/sh/lib/copy_page.S
new file mode 100644
index 0000000..d4e9d18
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/copy_page.S
@@ -0,0 +1,390 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * copy_page, __copy_user_page, __copy_user implementation of SuperH
+ *
+ * Copyright (C) 2001  Niibe Yutaka & Kaz Kojima
+ * Copyright (C) 2002  Toshinobu Sugioka
+ * Copyright (C) 2006  Paul Mundt
+ */
+#include <linux/linkage.h>
+#include <asm/page.h>
+
+/*
+ * copy_page
+ * @to: P1 address
+ * @from: P1 address
+ *
+ * void copy_page(void *to, void *from)
+ */
+
+/*
+ * r0, r1, r2, r3, r4, r5, r6, r7 --- scratch 
+ * r8 --- from + PAGE_SIZE
+ * r9 --- not used
+ * r10 --- to
+ * r11 --- from
+ */
+ENTRY(copy_page)
+	mov.l	r8,@-r15
+	mov.l	r10,@-r15
+	mov.l	r11,@-r15
+	mov	r4,r10
+	mov	r5,r11
+	mov	r5,r8
+	mov	#(PAGE_SIZE >> 10), r0
+	shll8	r0
+	shll2	r0
+	add	r0,r8
+	!
+1:	mov.l	@r11+,r0
+	mov.l	@r11+,r1
+	mov.l	@r11+,r2
+	mov.l	@r11+,r3
+	mov.l	@r11+,r4
+	mov.l	@r11+,r5
+	mov.l	@r11+,r6
+	mov.l	@r11+,r7
+#if defined(CONFIG_CPU_SH4)
+	movca.l	r0,@r10
+#else
+	mov.l	r0,@r10
+#endif
+	add	#32,r10
+	mov.l	r7,@-r10
+	mov.l	r6,@-r10
+	mov.l	r5,@-r10
+	mov.l	r4,@-r10
+	mov.l	r3,@-r10
+	mov.l	r2,@-r10
+	mov.l	r1,@-r10
+	cmp/eq	r11,r8
+	bf/s	1b
+	 add	#28,r10
+	!
+	mov.l	@r15+,r11
+	mov.l	@r15+,r10
+	mov.l	@r15+,r8
+	rts
+	 nop
+
+/*
+ * __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
+ * Return the number of bytes NOT copied
+ */
+#define EX(...)			\
+	9999: __VA_ARGS__ ;		\
+	.section __ex_table, "a";	\
+	.long 9999b, 6000f	;	\
+	.previous
+#define EX_NO_POP(...)			\
+	9999: __VA_ARGS__ ;		\
+	.section __ex_table, "a";	\
+	.long 9999b, 6005f	;	\
+	.previous
+ENTRY(__copy_user)
+	! Check if small number of bytes
+	mov	#11,r0
+	mov	r4,r3
+	cmp/gt	r0,r6		! r6 (len) > r0 (11)
+	bf/s	.L_cleanup_loop_no_pop
+	 add	r6,r3		! last destination address
+
+	! Calculate bytes needed to align to src
+	mov.l	r11,@-r15
+	neg	r5,r0
+	mov.l	r10,@-r15
+	add	#4,r0
+	mov.l	r9,@-r15
+	and	#3,r0
+	mov.l	r8,@-r15
+	tst	r0,r0
+	bt	2f
+
+1:
+	! Copy bytes to long word align src
+EX(	mov.b	@r5+,r1		)
+	dt	r0
+	add	#-1,r6
+EX(	mov.b	r1,@r4		)
+	bf/s	1b
+	 add	#1,r4
+
+	! Jump to appropriate routine depending on dest
+2:	mov	#3,r1
+	mov	r6, r2
+	and	r4,r1
+	shlr2	r2
+	shll2	r1
+	mova	.L_jump_tbl,r0
+	mov.l	@(r0,r1),r1
+	jmp	@r1
+	 nop
+
+	.align 2
+.L_jump_tbl:
+	.long	.L_dest00
+	.long	.L_dest01
+	.long	.L_dest10
+	.long	.L_dest11
+
+/*
+ * Come here if there are less than 12 bytes to copy
+ *
+ * Keep the branch target close, so the bf/s callee doesn't overflow
+ * and result in a more expensive branch being inserted. This is the
+ * fast-path for small copies, the jump via the jump table will hit the
+ * default slow-path cleanup. -PFM.
+ */
+.L_cleanup_loop_no_pop:
+	tst	r6,r6		! Check explicitly for zero
+	bt	1f
+
+2:
+EX_NO_POP(	mov.b	@r5+,r0		)
+	dt	r6
+EX_NO_POP(	mov.b	r0,@r4		)
+	bf/s	2b
+	 add	#1,r4
+
+1:	mov	#0,r0		! normal return
+5000:
+
+# Exception handler:
+.section .fixup, "ax"
+6005:
+	mov.l	8000f,r1
+	mov	r3,r0
+	jmp	@r1
+	 sub	r4,r0
+	.align	2
+8000:	.long	5000b
+
+.previous
+	rts
+	 nop
+
+! Destination = 00
+
+.L_dest00:
+	! Skip the large copy for small transfers
+	mov	#(32+32-4), r0
+	cmp/gt	r6, r0		! r0 (60) > r6 (len)
+	bt	1f
+
+	! Align dest to a 32 byte boundary
+	neg	r4,r0
+	add	#0x20, r0
+	and	#0x1f, r0
+	tst	r0, r0
+	bt	2f
+
+	sub	r0, r6
+	shlr2	r0
+3:
+EX(	mov.l	@r5+,r1		)
+	dt	r0
+EX(	mov.l	r1,@r4		)
+	bf/s	3b
+	 add	#4,r4
+
+2:
+EX(	mov.l	@r5+,r0		)
+EX(	mov.l	@r5+,r1		)
+EX(	mov.l	@r5+,r2		)
+EX(	mov.l	@r5+,r7		)
+EX(	mov.l	@r5+,r8		)
+EX(	mov.l	@r5+,r9		)
+EX(	mov.l	@r5+,r10	)
+EX(	mov.l	@r5+,r11	)
+#ifdef CONFIG_CPU_SH4
+EX(	movca.l	r0,@r4		)
+#else
+EX(	mov.l	r0,@r4		)
+#endif
+	add	#-32, r6
+EX(	mov.l	r1,@(4,r4)	)
+	mov	#32, r0
+EX(	mov.l	r2,@(8,r4)	)
+	cmp/gt	r6, r0		! r0 (32) > r6 (len)
+EX(	mov.l	r7,@(12,r4)	)
+EX(	mov.l	r8,@(16,r4)	)
+EX(	mov.l	r9,@(20,r4)	)
+EX(	mov.l	r10,@(24,r4)	)
+EX(	mov.l	r11,@(28,r4)	)
+	bf/s	2b
+	 add	#32,r4
+
+1:	mov	r6, r0
+	shlr2	r0
+	tst	r0, r0
+	bt	.L_cleanup
+1:
+EX(	mov.l	@r5+,r1		)
+	dt	r0
+EX(	mov.l	r1,@r4		)
+	bf/s	1b
+	 add	#4,r4
+
+	bra	.L_cleanup
+	 nop
+
+! Destination = 10
+
+.L_dest10:
+	mov	r2,r7
+	shlr2	r7
+	shlr	r7
+	tst	r7,r7
+	mov	#7,r0
+	bt/s	1f
+	 and	r0,r2
+2:
+	dt	r7
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+EX(	mov.l	@r5+,r0		)
+EX(	mov.l	@r5+,r1		)
+EX(	mov.l	@r5+,r8		)
+EX(	mov.l	@r5+,r9		)
+EX(	mov.l	@r5+,r10	)
+EX(	mov.w	r0,@r4		)
+	add	#2,r4
+	xtrct	r1,r0
+	xtrct	r8,r1
+	xtrct	r9,r8
+	xtrct	r10,r9
+
+EX(	mov.l	r0,@r4		)
+EX(	mov.l	r1,@(4,r4)	)
+EX(	mov.l	r8,@(8,r4)	)
+EX(	mov.l	r9,@(12,r4)	)
+
+EX(	mov.l	@r5+,r1		)
+EX(	mov.l	@r5+,r8		)
+EX(	mov.l	@r5+,r0		)
+	xtrct	r1,r10
+	xtrct	r8,r1
+	xtrct	r0,r8
+	shlr16	r0
+EX(	mov.l	r10,@(16,r4)	)
+EX(	mov.l	r1,@(20,r4)	)
+EX(	mov.l	r8,@(24,r4)	)
+EX(	mov.w	r0,@(28,r4)	)
+	bf/s	2b
+	 add	#30,r4
+#else
+EX(	mov.l	@(28,r5),r0	)
+EX(	mov.l	@(24,r5),r8	)
+EX(	mov.l	@(20,r5),r9	)
+EX(	mov.l	@(16,r5),r10	)
+EX(	mov.w	r0,@(30,r4)	)
+	add	#-2,r4
+	xtrct	r8,r0
+	xtrct	r9,r8
+	xtrct	r10,r9
+EX(	mov.l	r0,@(28,r4)	)
+EX(	mov.l	r8,@(24,r4)	)
+EX(	mov.l	r9,@(20,r4)	)
+
+EX(	mov.l	@(12,r5),r0	)
+EX(	mov.l	@(8,r5),r8	)
+	xtrct	r0,r10
+EX(	mov.l	@(4,r5),r9	)
+	mov.l	r10,@(16,r4)
+EX(	mov.l	@r5,r10		)
+	xtrct	r8,r0
+	xtrct	r9,r8
+	xtrct	r10,r9
+EX(	mov.l	r0,@(12,r4)	)
+EX(	mov.l	r8,@(8,r4)	)
+	swap.w	r10,r0
+EX(	mov.l	r9,@(4,r4)	)
+EX(	mov.w	r0,@(2,r4)	)
+
+	add	#32,r5
+	bf/s	2b
+	 add	#34,r4
+#endif
+	tst	r2,r2
+	bt	.L_cleanup
+
+1:	! Read longword, write two words per iteration
+EX(	mov.l	@r5+,r0		)
+	dt	r2
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+EX(	mov.w	r0,@r4		)
+	shlr16	r0
+EX(	mov.w 	r0,@(2,r4)	)
+#else
+EX(	mov.w	r0,@(2,r4)	)
+	shlr16	r0
+EX(	mov.w	r0,@r4		)
+#endif
+	bf/s	1b
+	 add	#4,r4
+
+	bra	.L_cleanup
+	 nop
+
+! Destination = 01 or 11
+
+.L_dest01:
+.L_dest11:
+	! Read longword, write byte, word, byte per iteration
+EX(	mov.l	@r5+,r0		)
+	dt	r2
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+EX(	mov.b	r0,@r4		)
+	shlr8	r0
+	add	#1,r4
+EX(	mov.w	r0,@r4		)
+	shlr16	r0
+EX(	mov.b	r0,@(2,r4)	)
+	bf/s	.L_dest01
+	 add	#3,r4
+#else
+EX(	mov.b	r0,@(3,r4)	)
+	shlr8	r0
+	swap.w	r0,r7
+EX(	mov.b	r7,@r4		)
+	add	#1,r4
+EX(	mov.w	r0,@r4		)
+	bf/s	.L_dest01
+	 add	#3,r4
+#endif
+
+! Cleanup last few bytes
+.L_cleanup:
+	mov	r6,r0
+	and	#3,r0
+	tst	r0,r0
+	bt	.L_exit
+	mov	r0,r6
+
+.L_cleanup_loop:
+EX(	mov.b	@r5+,r0		)
+	dt	r6
+EX(	mov.b	r0,@r4		)
+	bf/s	.L_cleanup_loop
+	 add	#1,r4
+
+.L_exit:
+	mov	#0,r0		! normal return
+
+5000:
+
+# Exception handler:
+.section .fixup, "ax"
+6000:
+	mov.l	8000f,r1
+	mov	r3,r0
+	jmp	@r1
+	 sub	r4,r0
+	.align	2
+8000:	.long	5000b
+
+.previous
+	mov.l	@r15+,r8
+	mov.l	@r15+,r9
+	mov.l	@r15+,r10
+	rts
+	 mov.l	@r15+,r11
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/delay.c b/src/kernel/linux/v4.14/arch/sh/lib/delay.c
new file mode 100644
index 0000000..dad8e6a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/delay.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	Precise Delay Loops for SuperH
+ *
+ *	Copyright (C) 1999 Niibe Yutaka & Kaz Kojima
+ */
+
+#include <linux/sched.h>
+#include <linux/delay.h>
+
+void __delay(unsigned long loops)
+{
+	__asm__ __volatile__(
+		/*
+		 * ST40-300 appears to have an issue with this code,
+		 * normally taking two cycles each loop, as with all
+		 * other SH variants. If however the branch and the
+		 * delay slot straddle an 8 byte boundary, this increases
+		 * to 3 cycles.
+		 * This align directive ensures this doesn't occur.
+		 */
+		".balign 8\n\t"
+
+		"tst	%0, %0\n\t"
+		"1:\t"
+		"bf/s	1b\n\t"
+		" dt	%0"
+		: "=r" (loops)
+		: "0" (loops)
+		: "t");
+}
+
+inline void __const_udelay(unsigned long xloops)
+{
+	xloops *= 4;
+	__asm__("dmulu.l	%0, %2\n\t"
+		"sts	mach, %0"
+		: "=r" (xloops)
+		: "0" (xloops),
+		  "r" (cpu_data[raw_smp_processor_id()].loops_per_jiffy * (HZ/4))
+		: "macl", "mach");
+	__delay(++xloops);
+}
+
+void __udelay(unsigned long usecs)
+{
+	__const_udelay(usecs * 0x000010c6);  /* 2**32 / 1000000 */
+}
+
+void __ndelay(unsigned long nsecs)
+{
+	__const_udelay(nsecs * 0x00000005);
+}
+
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/div64-generic.c b/src/kernel/linux/v4.14/arch/sh/lib/div64-generic.c
new file mode 100644
index 0000000..0b67fbc
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/div64-generic.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Generic __div64_32 wrapper for __xdiv64_32.
+ */
+
+#include <linux/types.h>
+#include <asm/div64.h>
+
+extern uint64_t __xdiv64_32(u64 n, u32 d);
+
+uint32_t __div64_32(u64 *xp, u32 y)
+{
+	uint32_t rem;
+	uint64_t q = __xdiv64_32(*xp, y);
+
+	rem = *xp - q * y;
+	*xp = q;
+
+	return rem;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/div64.S b/src/kernel/linux/v4.14/arch/sh/lib/div64.S
new file mode 100644
index 0000000..4a9a966
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/div64.S
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*	
+ * unsigned long __xdiv64_32(unsigned long long n, unsigned long d); 
+ */
+
+#include <linux/linkage.h>
+
+.text
+ENTRY(__xdiv64_32)
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	mov	r4, r0
+	mov	r5, r1
+#else
+	mov	r4, r1
+	mov	r5, r0
+#endif
+	cmp/hs	r6, r1
+	bf.s	1f
+	 mov	#0, r2
+
+	mov	r1, r2
+	mov	#0, r3
+	div0u
+	.rept	32
+	rotcl	r2
+	div1	r6, r3
+	.endr
+	rotcl	r2
+	mul.l	r6, r2
+	sts	macl, r3
+	sub	r3, r1
+1:
+	div0u
+	.rept	32
+	rotcl	r0
+	div1	r6, r1
+	.endr
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	mov	r2, r1
+	rts
+	 rotcl	r0
+#else
+	rotcl	r0
+	mov	r0, r1
+	rts
+	 mov	r2, r0
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/io.c b/src/kernel/linux/v4.14/arch/sh/lib/io.c
new file mode 100644
index 0000000..88dfe6e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/io.c
@@ -0,0 +1,82 @@
+/*
+ * arch/sh/lib/io.c - SH32 optimized I/O routines
+ *
+ * Copyright (C) 2000  Stuart Menefy
+ * Copyright (C) 2005  Paul Mundt
+ *
+ * Provide real functions which expand to whatever the header file defined.
+ * Also definitions of machine independent IO functions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+
+void __raw_readsl(const void __iomem *addr, void *datap, int len)
+{
+	u32 *data;
+
+	for (data = datap; (len != 0) && (((u32)data & 0x1f) != 0); len--)
+		*data++ = __raw_readl(addr);
+
+	if (likely(len >= (0x20 >> 2))) {
+		int tmp2, tmp3, tmp4, tmp5, tmp6;
+
+		__asm__ __volatile__(
+			"1:			\n\t"
+			"mov.l	@%7, r0		\n\t"
+			"mov.l	@%7, %2		\n\t"
+#ifdef CONFIG_CPU_SH4
+			"movca.l r0, @%0	\n\t"
+#else
+			"mov.l	r0, @%0		\n\t"
+#endif
+			"mov.l	@%7, %3		\n\t"
+			"mov.l	@%7, %4		\n\t"
+			"mov.l	@%7, %5		\n\t"
+			"mov.l	@%7, %6		\n\t"
+			"mov.l	@%7, r7		\n\t"
+			"mov.l	@%7, r0		\n\t"
+			"mov.l	%2, @(0x04,%0)	\n\t"
+			"mov	#0x20>>2, %2	\n\t"
+			"mov.l	%3, @(0x08,%0)	\n\t"
+			"sub	%2, %1		\n\t"
+			"mov.l	%4, @(0x0c,%0)	\n\t"
+			"cmp/hi	%1, %2		! T if 32 > len	\n\t"
+			"mov.l	%5, @(0x10,%0)	\n\t"
+			"mov.l	%6, @(0x14,%0)	\n\t"
+			"mov.l	r7, @(0x18,%0)	\n\t"
+			"mov.l	r0, @(0x1c,%0)	\n\t"
+			"bf.s	1b		\n\t"
+			" add	#0x20, %0	\n\t"
+			: "=&r" (data), "=&r" (len),
+			  "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4),
+			  "=&r" (tmp5), "=&r" (tmp6)
+			: "r"(addr), "0" (data), "1" (len)
+			: "r0", "r7", "t", "memory");
+	}
+
+	for (; len != 0; len--)
+		*data++ = __raw_readl(addr);
+}
+EXPORT_SYMBOL(__raw_readsl);
+
+void __raw_writesl(void __iomem *addr, const void *data, int len)
+{
+	if (likely(len != 0)) {
+		int tmp1;
+
+		__asm__ __volatile__ (
+			"1:				\n\t"
+			"mov.l	@%0+, %1	\n\t"
+			"dt		%3		\n\t"
+			"bf.s		1b		\n\t"
+			" mov.l	%1, @%4		\n\t"
+			: "=&r" (data), "=&r" (tmp1)
+			: "0" (data), "r" (len), "r"(addr)
+			: "t", "memory");
+	}
+}
+EXPORT_SYMBOL(__raw_writesl);
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/libgcc.h b/src/kernel/linux/v4.14/arch/sh/lib/libgcc.h
new file mode 100644
index 0000000..05909d5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/libgcc.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_LIBGCC_H
+#define __ASM_LIBGCC_H
+
+#include <asm/byteorder.h>
+
+typedef int word_type __attribute__ ((mode (__word__)));
+
+#ifdef __BIG_ENDIAN
+struct DWstruct {
+	int high, low;
+};
+#elif defined(__LITTLE_ENDIAN)
+struct DWstruct {
+	int low, high;
+};
+#else
+#error I feel sick.
+#endif
+
+typedef union {
+	struct DWstruct s;
+	long long ll;
+} DWunion;
+
+#endif /* __ASM_LIBGCC_H */
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/lshrdi3.c b/src/kernel/linux/v4.14/arch/sh/lib/lshrdi3.c
new file mode 100644
index 0000000..33eaa1e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/lshrdi3.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/module.h>
+
+#include "libgcc.h"
+
+long long __lshrdi3(long long u, word_type b)
+{
+	DWunion uu, w;
+	word_type bm;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+	bm = 32 - b;
+
+	if (bm <= 0) {
+		w.s.high = 0;
+		w.s.low = (unsigned int) uu.s.high >> -bm;
+	} else {
+		const unsigned int carries = (unsigned int) uu.s.high << bm;
+
+		w.s.high = (unsigned int) uu.s.high >> b;
+		w.s.low = ((unsigned int) uu.s.low >> b) | carries;
+	}
+
+	return w.ll;
+}
+
+EXPORT_SYMBOL(__lshrdi3);
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/lshrsi3.S b/src/kernel/linux/v4.14/arch/sh/lib/lshrsi3.S
new file mode 100644
index 0000000..f2a6959
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/lshrsi3.S
@@ -0,0 +1,209 @@
+/* Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
+   2004, 2005, 2006
+   Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file.  (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING.  If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.  */
+
+!! libgcc routines for the Renesas / SuperH SH CPUs.
+!! Contributed by Steve Chamberlain.
+!! sac@cygnus.com
+
+!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
+!! recoded in assembly by Toshiyasu Morita
+!! tm@netcom.com
+
+/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
+   ELF local label prefixes by J"orn Rennecke
+   amylaar@cygnus.com  */
+
+!
+! __lshrsi3
+!
+! Entry:
+!
+! r4: Value to shift
+! r5: Shifts
+!
+! Exit:
+!
+! r0: Result
+!
+! Destroys:
+!
+! (none)
+!
+! __lshrsi3_r0
+!
+! Entry:
+!
+! r0: Value to shift
+! r5: Shifts
+!
+! Exit:
+!
+! r0: Result
+!
+! Destroys:
+!
+! (none)
+!
+	.global	__lshrsi3
+	.global	__lshrsi3_r0
+	
+	.align	2
+__lshrsi3:
+	mov	r5,r0
+	.align	2
+__lshrsi3_r0:
+	and	#31,r0
+	mov.l	r4,@-r15
+	mov	r0,r4
+	mova	lshrsi3_table,r0
+	mov.b	@(r0,r4),r4
+	add	r4,r0
+	jmp	@r0
+	mov.l	@r15+,r0
+
+	.align	2
+lshrsi3_table:
+	.byte		lshrsi3_0-lshrsi3_table
+	.byte		lshrsi3_1-lshrsi3_table
+	.byte		lshrsi3_2-lshrsi3_table
+	.byte		lshrsi3_3-lshrsi3_table
+	.byte		lshrsi3_4-lshrsi3_table
+	.byte		lshrsi3_5-lshrsi3_table
+	.byte		lshrsi3_6-lshrsi3_table
+	.byte		lshrsi3_7-lshrsi3_table
+	.byte		lshrsi3_8-lshrsi3_table
+	.byte		lshrsi3_9-lshrsi3_table
+	.byte		lshrsi3_10-lshrsi3_table
+	.byte		lshrsi3_11-lshrsi3_table
+	.byte		lshrsi3_12-lshrsi3_table
+	.byte		lshrsi3_13-lshrsi3_table
+	.byte		lshrsi3_14-lshrsi3_table
+	.byte		lshrsi3_15-lshrsi3_table
+	.byte		lshrsi3_16-lshrsi3_table
+	.byte		lshrsi3_17-lshrsi3_table
+	.byte		lshrsi3_18-lshrsi3_table
+	.byte		lshrsi3_19-lshrsi3_table
+	.byte		lshrsi3_20-lshrsi3_table
+	.byte		lshrsi3_21-lshrsi3_table
+	.byte		lshrsi3_22-lshrsi3_table
+	.byte		lshrsi3_23-lshrsi3_table
+	.byte		lshrsi3_24-lshrsi3_table
+	.byte		lshrsi3_25-lshrsi3_table
+	.byte		lshrsi3_26-lshrsi3_table
+	.byte		lshrsi3_27-lshrsi3_table
+	.byte		lshrsi3_28-lshrsi3_table
+	.byte		lshrsi3_29-lshrsi3_table
+	.byte		lshrsi3_30-lshrsi3_table
+	.byte		lshrsi3_31-lshrsi3_table
+
+lshrsi3_6:
+	shlr2	r0
+lshrsi3_4:
+	shlr2	r0
+lshrsi3_2:
+	rts
+	shlr2	r0
+
+lshrsi3_7:
+	shlr2	r0
+lshrsi3_5:
+	shlr2	r0
+lshrsi3_3:
+	shlr2	r0
+lshrsi3_1:
+	rts
+	shlr	r0
+
+lshrsi3_14:
+	shlr2	r0
+lshrsi3_12:
+	shlr2	r0
+lshrsi3_10:
+	shlr2	r0
+lshrsi3_8:
+	rts
+	shlr8	r0
+
+lshrsi3_15:
+	shlr2	r0
+lshrsi3_13:
+	shlr2	r0
+lshrsi3_11:
+	shlr2	r0
+lshrsi3_9:
+	shlr8	r0
+	rts
+	shlr	r0
+
+lshrsi3_22:
+	shlr2	r0
+lshrsi3_20:
+	shlr2	r0
+lshrsi3_18:
+	shlr2	r0
+lshrsi3_16:
+	rts
+	shlr16	r0
+
+lshrsi3_23:
+	shlr2	r0
+lshrsi3_21:
+	shlr2	r0
+lshrsi3_19:
+	shlr2	r0
+lshrsi3_17:
+	shlr16	r0
+	rts
+	shlr	r0
+
+lshrsi3_30:
+	shlr2	r0
+lshrsi3_28:
+	shlr2	r0
+lshrsi3_26:
+	shlr2	r0
+lshrsi3_24:
+	shlr16	r0
+	rts
+	shlr8	r0
+
+lshrsi3_31:
+	shlr2	r0
+lshrsi3_29:
+	shlr2	r0
+lshrsi3_27:
+	shlr2	r0
+lshrsi3_25:
+	shlr16	r0
+	shlr8	r0
+	rts
+	shlr	r0
+
+lshrsi3_0:
+	rts
+	nop
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/mcount.S b/src/kernel/linux/v4.14/arch/sh/lib/mcount.S
new file mode 100644
index 0000000..7a8572f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/mcount.S
@@ -0,0 +1,290 @@
+/*
+ * arch/sh/lib/mcount.S
+ *
+ *  Copyright (C) 2008, 2009  Paul Mundt
+ *  Copyright (C) 2008, 2009  Matt Fleming
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <asm/ftrace.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+
+#define MCOUNT_ENTER()		\
+	mov.l	r4, @-r15;	\
+	mov.l	r5, @-r15;	\
+	mov.l	r6, @-r15;	\
+	mov.l	r7, @-r15;	\
+	sts.l	pr, @-r15;	\
+				\
+	mov.l	@(20,r15),r4;	\
+	sts	pr, r5
+
+#define MCOUNT_LEAVE()		\
+	lds.l	@r15+, pr;	\
+	mov.l	@r15+, r7;	\
+	mov.l	@r15+, r6;	\
+	mov.l	@r15+, r5;	\
+	rts;			\
+	 mov.l	@r15+, r4
+
+#ifdef CONFIG_STACK_DEBUG
+/*
+ * Perform diagnostic checks on the state of the kernel stack.
+ *
+ * Check for stack overflow. If there is less than 1KB free
+ * then it has overflowed.
+ *
+ * Make sure the stack pointer contains a valid address. Valid
+ * addresses for kernel stacks are anywhere after the bss
+ * (after __bss_stop) and anywhere in init_thread_union (init_stack).
+ */
+#define STACK_CHECK()					\
+	mov	#(THREAD_SIZE >> 10), r0;		\
+	shll8	r0;					\
+	shll2	r0;					\
+							\
+	/* r1 = sp & (THREAD_SIZE - 1) */		\
+	mov	#-1, r1;				\
+	add	r0, r1;					\
+	and	r15, r1;				\
+							\
+	mov	#TI_SIZE, r3;				\
+	mov	#(STACK_WARN >> 8), r2;			\
+	shll8	r2;					\
+	add	r3, r2;					\
+							\
+	/* Is the stack overflowing? */			\
+	cmp/hi	r2, r1;					\
+	bf	stack_panic;				\
+							\
+	/* If sp > __bss_stop then we're OK. */		\
+	mov.l	.L_ebss, r1;				\
+	cmp/hi	r1, r15;				\
+	bt	1f;					\
+							\
+	/* If sp < init_stack, we're not OK. */		\
+	mov.l	.L_init_thread_union, r1;		\
+	cmp/hs	r1, r15;				\
+	bf	stack_panic;				\
+							\
+	/* If sp > init_stack && sp < __bss_stop, not OK. */	\
+	add	r0, r1;					\
+	cmp/hs	r1, r15;				\
+	bt	stack_panic;				\
+1:
+#else
+#define STACK_CHECK()
+#endif /* CONFIG_STACK_DEBUG */
+
+	.align 2
+	.globl	_mcount
+	.type	_mcount,@function
+	.globl	mcount
+	.type	mcount,@function
+_mcount:
+mcount:
+	STACK_CHECK()
+
+#ifndef CONFIG_FUNCTION_TRACER
+	rts
+	 nop
+#else
+	MCOUNT_ENTER()
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+	.globl	mcount_call
+mcount_call:
+	mov.l	.Lftrace_stub, r6
+#else
+	mov.l	.Lftrace_trace_function, r6
+	mov.l	ftrace_stub, r7
+	cmp/eq	r6, r7
+	bt	skip_trace
+	mov.l	@r6, r6
+#endif
+
+	jsr	@r6
+	 nop
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	mov.l   .Lftrace_graph_return, r6
+	mov.l   .Lftrace_stub, r7
+	cmp/eq  r6, r7
+	bt      1f
+
+	mov.l   .Lftrace_graph_caller, r0
+	jmp     @r0
+	 nop
+
+1:
+	mov.l	.Lftrace_graph_entry, r6
+	mov.l	.Lftrace_graph_entry_stub, r7
+	cmp/eq	r6, r7
+	bt	skip_trace
+
+	mov.l   .Lftrace_graph_caller, r0
+	jmp	@r0
+	 nop
+
+	.align 2
+.Lftrace_graph_return:
+	.long   ftrace_graph_return
+.Lftrace_graph_entry:
+	.long   ftrace_graph_entry
+.Lftrace_graph_entry_stub:
+	.long   ftrace_graph_entry_stub
+.Lftrace_graph_caller:
+	.long   ftrace_graph_caller
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+	.globl skip_trace
+skip_trace:
+	MCOUNT_LEAVE()
+
+	.align 2
+.Lftrace_trace_function:
+	.long   ftrace_trace_function
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+/*
+ * NOTE: Do not move either ftrace_graph_call or ftrace_caller
+ * as this will affect the calculation of GRAPH_INSN_OFFSET.
+ */
+	.globl ftrace_graph_call
+ftrace_graph_call:
+	mov.l	.Lskip_trace, r0
+	jmp	@r0
+	 nop
+
+	.align 2
+.Lskip_trace:
+	.long	skip_trace
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+	.globl ftrace_caller
+ftrace_caller:
+	MCOUNT_ENTER()
+
+	.globl ftrace_call
+ftrace_call:
+	mov.l	.Lftrace_stub, r6
+	jsr	@r6
+	 nop
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	bra	ftrace_graph_call
+	 nop
+#else
+	MCOUNT_LEAVE()
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+	.align 2
+
+/*
+ * NOTE: From here on the locations of the .Lftrace_stub label and
+ * ftrace_stub itself are fixed. Adding additional data here will skew
+ * the displacement for the memory table and break the block replacement.
+ * Place new labels either after the ftrace_stub body, or before
+ * ftrace_caller. You have been warned.
+ */
+.Lftrace_stub:
+	.long	ftrace_stub
+
+	.globl	ftrace_stub
+ftrace_stub:
+	rts
+	 nop
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	.globl	ftrace_graph_caller
+ftrace_graph_caller:
+	mov.l	2f, r1
+	jmp	@r1
+	 nop
+1:
+	/*
+	 * MCOUNT_ENTER() pushed 5 registers onto the stack, so
+	 * the stack address containing our return address is
+	 * r15 + 20.
+	 */
+	mov	#20, r0
+	add	r15, r0
+	mov	r0, r4
+
+	mov.l	.Lprepare_ftrace_return, r0
+	jsr	@r0
+	 nop
+
+	MCOUNT_LEAVE()
+
+	.align 2
+2:	.long	skip_trace
+.Lprepare_ftrace_return:
+	.long	prepare_ftrace_return
+
+	.globl	return_to_handler
+return_to_handler:
+	/*
+	 * Save the return values.
+	 */
+	mov.l	r0, @-r15
+	mov.l	r1, @-r15
+
+	mov	#0, r4
+
+	mov.l	.Lftrace_return_to_handler, r0
+	jsr	@r0
+	 nop
+
+	/*
+	 * The return value from ftrace_return_handler has the real
+	 * address that we should return to.
+	 */
+	lds	r0, pr
+	mov.l	@r15+, r1
+	rts
+	 mov.l	@r15+, r0
+
+
+	.align 2
+.Lftrace_return_to_handler:
+	.long	ftrace_return_to_handler
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+#endif /* CONFIG_FUNCTION_TRACER */
+
+#ifdef CONFIG_STACK_DEBUG
+	.globl	stack_panic
+stack_panic:
+	mov.l	.Ldump_stack, r0
+	jsr	@r0
+	 nop
+
+	mov.l	.Lpanic, r0
+	jsr	@r0
+	 mov.l	.Lpanic_s, r4
+
+	rts
+	 nop
+
+	.align 2
+.L_init_thread_union:
+	.long	init_thread_union
+.L_ebss:
+	.long	__bss_stop
+.Lpanic:
+	.long	panic
+.Lpanic_s:
+	.long	.Lpanic_str
+.Ldump_stack:
+	.long	dump_stack
+
+	.section	.rodata
+	.align 2
+.Lpanic_str:
+	.string "Stack error"
+#endif /* CONFIG_STACK_DEBUG */
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/memchr.S b/src/kernel/linux/v4.14/arch/sh/lib/memchr.S
new file mode 100644
index 0000000..8ded104
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/memchr.S
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* $Id: memchr.S,v 1.1 2000/04/14 16:49:01 mjd Exp $
+ *
+ * "memchr" implementation of SuperH
+ *
+ * Copyright (C) 1999  Niibe Yutaka
+ *
+ */
+
+/*
+ * void *memchr(const void *s, int c, size_t n);
+ */
+
+#include <linux/linkage.h>
+ENTRY(memchr)
+	tst	r6,r6
+	bt/s	2f
+	 exts.b	r5,r5
+1:	mov.b	@r4,r1
+	cmp/eq	r1,r5
+	bt/s	3f
+	 dt	r6
+	bf/s	1b
+	 add	#1,r4
+2:	mov	#0,r4
+3:	rts
+	 mov	r4,r0
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/memcpy-sh4.S b/src/kernel/linux/v4.14/arch/sh/lib/memcpy-sh4.S
new file mode 100644
index 0000000..a2435c0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/memcpy-sh4.S
@@ -0,0 +1,800 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * "memcpy" implementation of SuperH
+ *
+ * Copyright (C) 1999  Niibe Yutaka
+ * Copyright (c) 2002  STMicroelectronics Ltd
+ *   Modified from memcpy.S and micro-optimised for SH4
+ *   Stuart Menefy (stuart.menefy@st.com)
+ *
+ */
+#include <linux/linkage.h>
+
+/*
+ * void *memcpy(void *dst, const void *src, size_t n);
+ *
+ * It is assumed that there is no overlap between src and dst.
+ * If there is an overlap, then the results are undefined.
+ */
+
+	!
+	!	GHIJ KLMN OPQR -->  ...G HIJK LMNO PQR.
+	!
+
+	! Size is 16 or greater, and may have trailing bytes
+
+	.balign	32
+.Lcase1:
+	! Read a long word and write a long word at once
+	! At the start of each iteration, r7 contains last long load
+	add	#-1,r5		!  79 EX
+	mov	r4,r2		!   5 MT (0 cycles latency)
+
+	mov.l	@(r0,r5),r7	!  21 LS (2 cycles latency)
+	add	#-4,r5		!  50 EX
+
+	add	#7,r2		!  79 EX
+	!
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	! 6 cycles, 4 bytes per iteration
+3:	mov.l	@(r0,r5),r1	!  21 LS (latency=2)	! NMLK
+	mov	r7, r3		!   5 MT (latency=0)	! RQPO
+
+	cmp/hi	r2,r0		!  57 MT
+	shll16	r3		! 103 EX
+
+	mov	r1,r6		!   5 MT (latency=0)
+	shll8	r3		! 102 EX		! Oxxx
+
+	shlr8	r6		! 106 EX		! xNML
+	mov	r1, r7		!   5 MT (latency=0)
+
+	or	r6,r3		!  82 EX		! ONML
+	bt/s	3b		! 109 BR
+
+	 mov.l	r3,@-r0		!  30 LS
+#else
+3:	mov.l	@(r0,r5),r1	!  21 LS (latency=2)	! KLMN
+	mov	r7,r3		!   5 MT (latency=0)	! OPQR
+
+	cmp/hi	r2,r0		!  57 MT
+	shlr16	r3		! 107 EX
+
+	shlr8	r3		! 106 EX		! xxxO
+	mov	r1,r6		!   5 MT (latency=0)
+
+	shll8	r6		! 102 EX		! LMNx
+	mov	r1,r7		!   5 MT (latency=0)
+
+	or	r6,r3		!  82 EX		! LMNO
+	bt/s	3b		! 109 BR
+
+	 mov.l	r3,@-r0		!  30 LS
+#endif
+	! Finally, copy a byte at once, if necessary
+
+	add	#4,r5		!  50 EX
+	cmp/eq	r4,r0		!  54 MT
+
+	add	#-6,r2		!  50 EX
+	bt	9f		! 109 BR
+
+8:	cmp/hi	r2,r0		!  57 MT
+	mov.b	@(r0,r5),r1	!  20 LS (latency=2)
+
+	bt/s	8b		! 109 BR
+
+	 mov.b	r1,@-r0		!  29 LS
+
+9:	rts
+	 nop
+
+
+	!
+	!	GHIJ KLMN OPQR -->  .GHI JKLM NOPQ R...
+	!
+
+	! Size is 16 or greater, and may have trailing bytes
+
+	.balign	32
+.Lcase3:
+	! Read a long word and write a long word at once
+	! At the start of each iteration, r7 contains last long load
+	add	#-3,r5		! 79 EX
+	mov	r4,r2		!  5 MT (0 cycles latency)
+
+	mov.l	@(r0,r5),r7	! 21 LS (2 cycles latency)
+	add	#-4,r5		! 50 EX
+
+	add	#7,r2		!  79 EX
+	!
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	! 6 cycles, 4 bytes per iteration
+3:	mov.l	@(r0,r5),r1	!  21 LS (latency=2)	! NMLK
+	mov	r7, r3		!   5 MT (latency=0)	! RQPO
+
+	cmp/hi	r2,r0		!  57 MT
+	shll8	r3		! 102 EX		! QPOx
+
+	mov	r1,r6		!   5 MT (latency=0)
+	shlr16	r6		! 107 EX
+
+	shlr8	r6		! 106 EX		! xxxN
+	mov	r1, r7		!   5 MT (latency=0)
+
+	or	r6,r3		!  82 EX		! QPON
+	bt/s	3b		! 109 BR
+
+	 mov.l	r3,@-r0		!  30 LS
+#else
+3:	mov	r7,r3		! OPQR
+	shlr8	r3		! xOPQ
+	mov.l	@(r0,r5),r7	! KLMN
+	mov	r7,r6
+	shll16	r6
+	shll8	r6		! Nxxx
+	or	r6,r3		! NOPQ
+	cmp/hi	r2,r0
+	bt/s	3b
+	 mov.l	r3,@-r0
+#endif
+
+	! Finally, copy a byte at once, if necessary
+
+	add	#6,r5		!  50 EX
+	cmp/eq	r4,r0		!  54 MT
+
+	add	#-6,r2		!  50 EX
+	bt	9f		! 109 BR
+
+8:	cmp/hi	r2,r0		!  57 MT
+	mov.b	@(r0,r5),r1	!  20 LS (latency=2)
+
+	bt/s	8b		! 109 BR
+
+	 mov.b	r1,@-r0		!  29 LS
+
+9:	rts
+	 nop
+
+ENTRY(memcpy)
+
+	! Calculate the invariants which will be used in the remainder
+	! of the code:
+	!
+	!      r4   -->  [ ...  ] DST             [ ...  ] SRC
+	!	         [ ...  ]                 [ ...  ]
+	!	           :                        :
+	!      r0   -->  [ ...  ]       r0+r5 --> [ ...  ]
+	!
+	!
+
+	! Short circuit the common case of src, dst and len being 32 bit aligned
+	! and test for zero length move
+
+	mov	r6, r0		!   5 MT (0 cycle latency)
+	or	r4, r0		!  82 EX
+
+	or	r5, r0		!  82 EX
+	tst	r6, r6		!  86 MT
+
+	bt/s	99f		! 111 BR		(zero len)
+	 tst	#3, r0		!  87 MT
+
+	mov	r4, r0		!   5 MT (0 cycle latency)
+	add	r6, r0		!  49 EX
+
+	mov	#16, r1		!   6 EX
+	bt/s	.Lcase00	! 111 BR		(aligned)
+
+	 sub	r4, r5		!  75 EX
+
+	! Arguments are not nicely long word aligned or zero len.
+	! Check for small copies, and if so do a simple byte at a time copy.
+	!
+	! Deciding on an exact value of 'small' is not easy, as the point at which
+	! using the optimised routines become worthwhile varies (these are the
+	! cycle counts for differnet sizes using byte-at-a-time vs. optimised):
+	!	size	byte-at-time	long	word	byte
+	!	16	42		39-40	46-50	50-55
+	!	24	58		43-44	54-58	62-67
+	!	36	82		49-50	66-70	80-85
+	! However the penalty for getting it 'wrong' is much higher for long word
+	! aligned data (and this is more common), so use a value of 16.
+
+	cmp/gt	r6,r1		!  56 MT
+
+	add	#-1,r5		!  50 EX
+	bf/s	6f		! 108 BR		(not small)
+
+	 mov	r5, r3		!   5 MT (latency=0)
+	shlr	r6		! 104 EX
+
+	mov.b	@(r0,r5),r1	!  20 LS (latency=2)
+	bf/s	4f		! 111 BR
+
+	 add	#-1,r3		!  50 EX
+	tst	r6, r6		!  86 MT
+
+	bt/s	98f		! 110 BR
+	 mov.b	r1,@-r0		!  29 LS
+
+	! 4 cycles, 2 bytes per iteration
+3:	mov.b	@(r0,r5),r1	!  20 LS (latency=2)
+
+4:	mov.b	@(r0,r3),r2	!  20 LS (latency=2)
+	dt	r6		!  67 EX
+
+	mov.b	r1,@-r0		!  29 LS
+	bf/s	3b		! 111 BR
+
+	 mov.b	r2,@-r0		!  29 LS
+98:
+	rts
+	 nop
+
+99:	rts
+	 mov	r4, r0
+
+	! Size is not small, so its worthwhile looking for optimisations.
+	! First align destination to a long word boundary.
+	!
+	! r5 = normal value -1
+
+6:	tst	#3, r0		!  87 MT
+        mov	#3, r3		!   6 EX
+
+	bt/s	2f		! 111 BR
+	 and	r0,r3		!  78 EX
+
+	! 3 cycles, 1 byte per iteration
+1:	dt	r3		!  67 EX
+	mov.b	@(r0,r5),r1	!  19 LS (latency=2)
+
+	add	#-1, r6		!  79 EX
+	bf/s	1b		! 109 BR
+
+	 mov.b	r1,@-r0		!  28 LS
+
+2:	add	#1, r5		!  79 EX
+
+	! Now select the appropriate bulk transfer code based on relative
+	! alignment of src and dst.
+
+	mov	r0, r3		!   5 MT (latency=0)
+
+	mov	r5, r0		!   5 MT (latency=0)
+	tst	#1, r0		!  87 MT
+
+	bf/s	1f		! 111 BR
+	 mov	#64, r7		!   6 EX
+
+	! bit 0 clear
+
+	cmp/ge	r7, r6		!  55 MT
+
+	bt/s	2f		! 111 BR
+	 tst	#2, r0		!  87 MT
+
+	! small
+	bt/s	.Lcase0
+	 mov	r3, r0
+
+	bra	.Lcase2
+	 nop
+
+	! big
+2:	bt/s	.Lcase0b
+	 mov	r3, r0
+
+	bra	.Lcase2b
+	 nop
+
+	! bit 0 set
+1:	tst	#2, r0		! 87 MT
+
+	bt/s	.Lcase1
+	 mov	r3, r0
+
+	bra	.Lcase3
+	 nop
+
+
+	!
+	!	GHIJ KLMN OPQR -->  GHIJ KLMN OPQR
+	!
+
+	! src, dst and size are all long word aligned
+	! size is non-zero
+
+	.balign	32
+.Lcase00:
+	mov	#64, r1		!   6 EX
+	mov	r5, r3		!   5 MT (latency=0)
+
+	cmp/gt	r6, r1		!  56 MT
+	add	#-4, r5		!  50 EX
+
+	bf	.Lcase00b	! 108 BR		(big loop)
+	shlr2	r6		! 105 EX
+
+	shlr	r6		! 104 EX
+	mov.l	@(r0, r5), r1	!  21 LS (latency=2)
+
+	bf/s	4f		! 111 BR
+	 add	#-8, r3		!  50 EX
+
+	tst	r6, r6		!  86 MT
+	bt/s	5f		! 110 BR
+
+	 mov.l	r1,@-r0		!  30 LS
+
+	! 4 cycles, 2 long words per iteration
+3:	mov.l	@(r0, r5), r1	!  21 LS (latency=2)
+
+4:	mov.l	@(r0, r3), r2	!  21 LS (latency=2)
+	dt	r6		!  67 EX
+
+	mov.l	r1, @-r0	!  30 LS
+	bf/s	3b		! 109 BR
+
+	 mov.l	r2, @-r0	!  30 LS
+
+5:	rts
+	 nop
+
+
+	! Size is 16 or greater and less than 64, but may have trailing bytes
+
+	.balign	32
+.Lcase0:
+	add	#-4, r5		!  50 EX
+	mov	r4, r7		!   5 MT (latency=0)
+
+	mov.l	@(r0, r5), r1	!  21 LS (latency=2)
+	mov	#4, r2		!   6 EX
+
+	add	#11, r7		!  50 EX
+	tst	r2, r6		!  86 MT
+
+	mov	r5, r3		!   5 MT (latency=0)
+	bt/s	4f		! 111 BR
+
+	 add	#-4, r3		!  50 EX
+	mov.l	r1,@-r0		!  30 LS
+
+	! 4 cycles, 2 long words per iteration
+3:	mov.l	@(r0, r5), r1	!  21 LS (latency=2)
+
+4:	mov.l	@(r0, r3), r2	!  21 LS (latency=2)
+	cmp/hi	r7, r0
+
+	mov.l	r1, @-r0	!  30 LS
+	bt/s	3b		! 109 BR
+
+	 mov.l	r2, @-r0	!  30 LS
+
+	! Copy the final 0-3 bytes
+
+	add	#3,r5		!  50 EX
+
+	cmp/eq	r0, r4		!  54 MT
+	add	#-10, r7	!  50 EX
+
+	bt	9f		! 110 BR
+
+	! 3 cycles, 1 byte per iteration
+1:	mov.b	@(r0,r5),r1	!  19 LS
+	cmp/hi	r7,r0		!  57 MT
+
+	bt/s	1b		! 111 BR
+	 mov.b	r1,@-r0		!  28 LS
+
+9:	rts
+	 nop
+
+	! Size is at least 64 bytes, so will be going round the big loop at least once.
+	!
+	!   r2 = rounded up r4
+	!   r3 = rounded down r0
+
+	.balign	32
+.Lcase0b:
+	add	#-4, r5		!  50 EX
+
+.Lcase00b:
+	mov	r0, r3		!   5 MT (latency=0)
+	mov	#(~0x1f), r1	!   6 EX
+
+	and	r1, r3		!  78 EX
+	mov	r4, r2		!   5 MT (latency=0)
+
+	cmp/eq	r3, r0		!  54 MT
+	add	#0x1f, r2	!  50 EX
+
+	bt/s	1f		! 110 BR
+	 and	r1, r2		!  78 EX
+
+	! copy initial words until cache line aligned
+
+	mov.l	@(r0, r5), r1	!  21 LS (latency=2)
+	tst	#4, r0		!  87 MT
+
+	mov	r5, r6		!   5 MT (latency=0)
+	add	#-4, r6		!  50 EX
+
+	bt/s	4f		! 111 BR
+	 add	#8, r3		!  50 EX
+
+	tst	#0x18, r0	!  87 MT
+
+	bt/s	1f		! 109 BR
+	 mov.l	r1,@-r0		!  30 LS
+
+	! 4 cycles, 2 long words per iteration
+3:	mov.l	@(r0, r5), r1	!  21 LS (latency=2)
+
+4:	mov.l	@(r0, r6), r7	!  21 LS (latency=2)
+	cmp/eq	r3, r0		!  54 MT
+
+	mov.l	r1, @-r0	!  30 LS
+	bf/s	3b		! 109 BR
+
+	 mov.l	r7, @-r0	!  30 LS
+
+	! Copy the cache line aligned blocks
+	!
+	! In use: r0, r2, r4, r5
+	! Scratch: r1, r3, r6, r7
+	!
+	! We could do this with the four scratch registers, but if src
+	! and dest hit the same cache line, this will thrash, so make
+	! use of additional registers.
+	!
+	! We also need r0 as a temporary (for movca), so 'undo' the invariant:
+	!   r5:	 src (was r0+r5)
+	!   r1:	 dest (was r0)
+	! this can be reversed at the end, so we don't need to save any extra
+	! state.
+	!
+1:	mov.l	r8, @-r15	!  30 LS
+	add	r0, r5		!  49 EX
+
+	mov.l	r9, @-r15	!  30 LS
+	mov	r0, r1		!   5 MT (latency=0)
+
+	mov.l	r10, @-r15	!  30 LS
+	add	#-0x1c, r5	!  50 EX
+
+	mov.l	r11, @-r15	!  30 LS
+
+	! 16 cycles, 32 bytes per iteration
+2:	mov.l	@(0x00,r5),r0	! 18 LS (latency=2)
+	add	#-0x20, r1	! 50 EX
+	mov.l	@(0x04,r5),r3	! 18 LS (latency=2)
+	mov.l	@(0x08,r5),r6	! 18 LS (latency=2)
+	mov.l	@(0x0c,r5),r7	! 18 LS (latency=2)
+	mov.l	@(0x10,r5),r8	! 18 LS (latency=2)
+	mov.l	@(0x14,r5),r9	! 18 LS (latency=2)
+	mov.l	@(0x18,r5),r10	! 18 LS (latency=2)
+	mov.l	@(0x1c,r5),r11	! 18 LS (latency=2)
+	movca.l	r0,@r1		! 40 LS (latency=3-7)
+	mov.l	r3,@(0x04,r1)	! 33 LS
+	mov.l	r6,@(0x08,r1)	! 33 LS
+	mov.l	r7,@(0x0c,r1)	! 33 LS
+
+	mov.l	r8,@(0x10,r1)	! 33 LS
+	add	#-0x20, r5	! 50 EX
+
+	mov.l	r9,@(0x14,r1)	! 33 LS
+	cmp/eq	r2,r1		! 54 MT
+
+	mov.l	r10,@(0x18,r1)	!  33 LS
+	bf/s	2b		! 109 BR
+
+	 mov.l	r11,@(0x1c,r1)	!  33 LS
+
+	mov	r1, r0		!   5 MT (latency=0)
+
+	mov.l	@r15+, r11	!  15 LS
+	sub	r1, r5		!  75 EX
+
+	mov.l	@r15+, r10	!  15 LS
+	cmp/eq	r4, r0		!  54 MT
+
+	bf/s	1f		! 109 BR
+	 mov.l	 @r15+, r9	!  15 LS
+
+	rts
+1:	 mov.l	@r15+, r8	!  15 LS
+	sub	r4, r1		!  75 EX		(len remaining)
+
+	! number of trailing bytes is non-zero
+	!
+	! invariants restored (r5 already decremented by 4)
+	! also r1=num bytes remaining
+
+	mov	#4, r2		!   6 EX
+	mov	r4, r7		!   5 MT (latency=0)
+
+	add	#0x1c, r5	!  50 EX		(back to -4)
+	cmp/hs	r2, r1		!  58 MT
+
+	bf/s	5f		! 108 BR
+	 add	 #11, r7	!  50 EX
+
+	mov.l	@(r0, r5), r6	!  21 LS (latency=2)
+	tst	r2, r1		!  86 MT
+
+	mov	r5, r3		!   5 MT (latency=0)
+	bt/s	4f		! 111 BR
+
+	 add	#-4, r3		!  50 EX
+	cmp/hs	r2, r1		!  58 MT
+
+	bt/s	5f		! 111 BR
+	 mov.l	r6,@-r0		!  30 LS
+
+	! 4 cycles, 2 long words per iteration
+3:	mov.l	@(r0, r5), r6	!  21 LS (latency=2)
+
+4:	mov.l	@(r0, r3), r2	!  21 LS (latency=2)
+	cmp/hi	r7, r0
+
+	mov.l	r6, @-r0	!  30 LS
+	bt/s	3b		! 109 BR
+
+	 mov.l	r2, @-r0	!  30 LS
+
+	! Copy the final 0-3 bytes
+
+5:	cmp/eq	r0, r4		!  54 MT
+	add	#-10, r7	!  50 EX
+
+	bt	9f		! 110 BR
+	add	#3,r5		!  50 EX
+
+	! 3 cycles, 1 byte per iteration
+1:	mov.b	@(r0,r5),r1	!  19 LS
+	cmp/hi	r7,r0		!  57 MT
+
+	bt/s	1b		! 111 BR
+	 mov.b	r1,@-r0		!  28 LS
+
+9:	rts
+	 nop
+
+	!
+	!	GHIJ KLMN OPQR -->  ..GH IJKL MNOP QR..
+	!
+
+	.balign	32
+.Lcase2:
+	! Size is 16 or greater and less then 64, but may have trailing bytes
+
+2:	mov	r5, r6		!   5 MT (latency=0)
+	add	#-2,r5		!  50 EX
+
+	mov	r4,r2		!   5 MT (latency=0)
+	add	#-4,r6		!  50 EX
+
+	add	#7,r2		!  50 EX
+3:	mov.w	@(r0,r5),r1	!  20 LS (latency=2)
+
+	mov.w	@(r0,r6),r3	!  20 LS (latency=2)
+	cmp/hi	r2,r0		!  57 MT
+
+	mov.w	r1,@-r0		!  29 LS
+	bt/s	3b		! 111 BR
+
+	 mov.w	r3,@-r0		!  29 LS
+
+	bra	10f
+	 nop
+
+
+	.balign	32
+.Lcase2b:
+	! Size is at least 64 bytes, so will be going round the big loop at least once.
+	!
+	!   r2 = rounded up r4
+	!   r3 = rounded down r0
+
+	mov	r0, r3		!   5 MT (latency=0)
+	mov	#(~0x1f), r1	!   6 EX
+
+	and	r1, r3		!  78 EX
+	mov	r4, r2		!   5 MT (latency=0)
+
+	cmp/eq	r3, r0		!  54 MT
+	add	#0x1f, r2	!  50 EX
+
+	add	#-2, r5		!  50 EX
+	bt/s	1f		! 110 BR
+	 and	r1, r2		!  78 EX
+
+	! Copy a short word one at a time until we are cache line aligned
+	!   Normal values: r0, r2, r3, r4
+	!   Unused: r1, r6, r7
+	!   Mod: r5 (=r5-2)
+	!
+	add	#2, r3		!  50 EX
+
+2:	mov.w	@(r0,r5),r1	!  20 LS (latency=2)
+	cmp/eq	r3,r0		!  54 MT
+
+	bf/s	2b		! 111 BR
+
+	 mov.w	r1,@-r0		!  29 LS
+
+	! Copy the cache line aligned blocks
+	!
+	! In use: r0, r2, r4, r5 (=r5-2)
+	! Scratch: r1, r3, r6, r7
+	!
+	! We could do this with the four scratch registers, but if src
+	! and dest hit the same cache line, this will thrash, so make
+	! use of additional registers.
+	!
+	! We also need r0 as a temporary (for movca), so 'undo' the invariant:
+	!   r5:	 src (was r0+r5)
+	!   r1:	 dest (was r0)
+	! this can be reversed at the end, so we don't need to save any extra
+	! state.
+	!
+1:	mov.l	r8, @-r15	!  30 LS
+	add	r0, r5		!  49 EX
+
+	mov.l	r9, @-r15	!  30 LS
+	mov	r0, r1		!   5 MT (latency=0)
+
+	mov.l	r10, @-r15	!  30 LS
+	add	#-0x1e, r5	!  50 EX
+
+	mov.l	r11, @-r15	!  30 LS
+
+	mov.l	r12, @-r15	!  30 LS
+
+	! 17 cycles, 32 bytes per iteration
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+2:	mov.w	@r5+, r0	!  14 LS (latency=2)		..JI
+	add	#-0x20, r1	!  50 EX
+
+	mov.l	@r5+, r3	!  15 LS (latency=2)		NMLK
+
+	mov.l	@r5+, r6	!  15 LS (latency=2)		RQPO
+	shll16	r0		! 103 EX			JI..
+
+	mov.l	@r5+, r7	!  15 LS (latency=2)
+	xtrct	r3, r0		!  48 EX			LKJI
+
+	mov.l	@r5+, r8	!  15 LS (latency=2)
+	xtrct	r6, r3		!  48 EX			PONM
+
+	mov.l	@r5+, r9	!  15 LS (latency=2)
+	xtrct	r7, r6		!  48 EX
+
+	mov.l	@r5+, r10	!  15 LS (latency=2)
+	xtrct	r8, r7		!  48 EX
+
+	mov.l	@r5+, r11	!  15 LS (latency=2)
+	xtrct	r9, r8		!  48 EX
+
+	mov.w	@r5+, r12	!  15 LS (latency=2)
+	xtrct	r10, r9		!  48 EX
+
+	movca.l	r0,@r1		!  40 LS (latency=3-7)
+	xtrct	r11, r10	!  48 EX
+
+	mov.l	r3, @(0x04,r1)	!  33 LS
+	xtrct	r12, r11	!  48 EX
+
+	mov.l	r6, @(0x08,r1)	!  33 LS
+
+	mov.l	r7, @(0x0c,r1)	!  33 LS
+
+	mov.l	r8, @(0x10,r1)	!  33 LS
+	add	#-0x40, r5	!  50 EX
+
+	mov.l	r9, @(0x14,r1)	!  33 LS
+	cmp/eq	r2,r1		!  54 MT
+
+	mov.l	r10, @(0x18,r1)	!  33 LS
+	bf/s	2b		! 109 BR
+
+	 mov.l	r11, @(0x1c,r1)	!  33 LS
+#else
+2:	mov.w	@(0x1e,r5), r0	!  17 LS (latency=2)
+	add	#-2, r5		!  50 EX
+
+	mov.l	@(0x1c,r5), r3	!  18 LS (latency=2)
+	add	#-4, r1		!  50 EX
+
+	mov.l	@(0x18,r5), r6	!  18 LS (latency=2)
+	shll16	r0		! 103 EX
+
+	mov.l	@(0x14,r5), r7	!  18 LS (latency=2)
+	xtrct	r3, r0		!  48 EX
+
+	mov.l	@(0x10,r5), r8	!  18 LS (latency=2)
+	xtrct	r6, r3		!  48 EX
+
+	mov.l	@(0x0c,r5), r9	!  18 LS (latency=2)
+	xtrct	r7, r6		!  48 EX
+
+	mov.l	@(0x08,r5), r10	!  18 LS (latency=2)
+	xtrct	r8, r7		!  48 EX
+
+	mov.l	@(0x04,r5), r11	!  18 LS (latency=2)
+	xtrct	r9, r8		!  48 EX
+
+	mov.l   @(0x00,r5), r12 !  18 LS (latency=2)
+    	xtrct	r10, r9		!  48 EX
+
+	movca.l	r0,@r1		!  40 LS (latency=3-7)
+	add	#-0x1c, r1	!  50 EX
+
+	mov.l	r3, @(0x18,r1)	!  33 LS
+	xtrct	r11, r10	!  48 EX
+
+	mov.l	r6, @(0x14,r1)	!  33 LS
+	xtrct	r12, r11	!  48 EX
+
+	mov.l	r7, @(0x10,r1)	!  33 LS
+
+	mov.l	r8, @(0x0c,r1)	!  33 LS
+	add	#-0x1e, r5	!  50 EX
+
+	mov.l	r9, @(0x08,r1)	!  33 LS
+	cmp/eq	r2,r1		!  54 MT
+
+	mov.l	r10, @(0x04,r1)	!  33 LS
+	bf/s	2b		! 109 BR
+
+	 mov.l	r11, @(0x00,r1)	!  33 LS
+#endif
+
+	mov.l	@r15+, r12
+	mov	r1, r0		!   5 MT (latency=0)
+
+	mov.l	@r15+, r11	!  15 LS
+	sub	r1, r5		!  75 EX
+
+	mov.l	@r15+, r10	!  15 LS
+	cmp/eq	r4, r0		!  54 MT
+
+	bf/s	1f		! 109 BR
+	 mov.l	 @r15+, r9	!  15 LS
+
+	rts
+1:	 mov.l	@r15+, r8	!  15 LS
+
+	add	#0x1e, r5	!  50 EX
+
+	! Finish off a short word at a time
+	! r5 must be invariant - 2
+10:	mov	r4,r2		!   5 MT (latency=0)
+	add	#1,r2		!  50 EX
+
+	cmp/hi	r2, r0		!  57 MT
+	bf/s	1f		! 109 BR
+
+	 add	#2, r2		!  50 EX
+
+3:	mov.w	@(r0,r5),r1	!  20 LS
+	cmp/hi	r2,r0		!  57 MT
+
+	bt/s	3b		! 109 BR
+
+	 mov.w	r1,@-r0		!  29 LS
+1:
+
+	!
+	! Finally, copy the last byte if necessary
+	cmp/eq	r4,r0		!  54 MT
+	bt/s	9b
+	 add	#1,r5
+	mov.b	@(r0,r5),r1
+	rts
+	 mov.b	r1,@-r0
+
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/memcpy.S b/src/kernel/linux/v4.14/arch/sh/lib/memcpy.S
new file mode 100644
index 0000000..08ab306
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/memcpy.S
@@ -0,0 +1,228 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* $Id: memcpy.S,v 1.3 2001/07/27 11:50:52 gniibe Exp $
+ *
+ * "memcpy" implementation of SuperH
+ *
+ * Copyright (C) 1999  Niibe Yutaka
+ *
+ */
+
+/*
+ * void *memcpy(void *dst, const void *src, size_t n);
+ * No overlap between the memory of DST and of SRC are assumed.
+ */
+
+#include <linux/linkage.h>
+ENTRY(memcpy)
+	tst	r6,r6
+	bt/s	9f		! if n=0, do nothing
+	 mov	r4,r0
+	sub	r4,r5		! From here, r5 has the distance to r0
+	add	r6,r0		! From here, r0 points the end of copying point
+	mov	#12,r1
+	cmp/gt	r6,r1
+	bt/s	7f		! if it's too small, copy a byte at once
+	 add	#-1,r5
+	add	#1,r5
+	!			From here, r6 is free
+	!
+	!      r4   -->  [ ...  ] DST             [ ...  ] SRC
+	!	         [ ...  ]                 [ ...  ]
+	!	           :                        :
+	!      r0   -->  [ ...  ]       r0+r5 --> [ ...  ]
+	!
+	!
+	mov	r5,r1
+	mov	#3,r2
+	and	r2,r1
+	shll2	r1
+	mov	r0,r3		! Save the value on R0 to R3
+	mova	jmptable,r0
+	add	r1,r0
+	mov.l	@r0,r1
+	jmp	@r1
+	 mov	r3,r0		! and back to R0
+	.balign	4
+jmptable:
+	.long	case0
+	.long	case1
+	.long	case2
+	.long	case3
+
+	! copy a byte at once
+7:	mov	r4,r2
+	add	#1,r2
+8:
+	cmp/hi	r2,r0
+	mov.b	@(r0,r5),r1
+	bt/s	8b			! while (r0>r2)
+	 mov.b	r1,@-r0
+9:
+	rts
+	 nop
+
+case0:
+	!
+	!	GHIJ KLMN OPQR -->  GHIJ KLMN OPQR
+	!
+	! First, align to long word boundary
+	mov	r0,r3
+	and	r2,r3
+	tst	r3,r3
+	bt/s	2f
+	 add	#-4,r5
+	add	#3,r5
+1:	dt	r3
+	mov.b	@(r0,r5),r1
+	bf/s	1b
+	 mov.b	r1,@-r0
+	!
+	add	#-3,r5
+2:	! Second, copy a long word at once
+	mov	r4,r2
+	add	#7,r2
+3:	mov.l	@(r0,r5),r1
+	cmp/hi	r2,r0
+	bt/s	3b
+	 mov.l	r1,@-r0
+	!
+	! Third, copy a byte at once, if necessary
+	cmp/eq	r4,r0
+	bt/s	9b
+	 add	#3,r5
+	bra	8b
+	 add	#-6,r2
+
+case1:
+	!
+	!	GHIJ KLMN OPQR -->  ...G HIJK LMNO PQR.
+	!
+	! First, align to long word boundary
+	mov	r0,r3
+	and	r2,r3
+	tst	r3,r3
+	bt/s	2f
+	 add	#-1,r5
+1:	dt	r3
+	mov.b	@(r0,r5),r1
+	bf/s	1b
+	 mov.b	r1,@-r0
+	!
+2:	! Second, read a long word and write a long word at once
+	mov.l	@(r0,r5),r1
+	add	#-4,r5
+	mov	r4,r2
+	add	#7,r2
+	!
+#ifdef __LITTLE_ENDIAN__
+3:	mov	r1,r3		! RQPO
+	shll16	r3
+	shll8	r3		! Oxxx
+	mov.l	@(r0,r5),r1	! NMLK
+	mov	r1,r6
+	shlr8	r6		! xNML
+	or	r6,r3		! ONML
+	cmp/hi	r2,r0
+	bt/s	3b
+	 mov.l	r3,@-r0
+#else
+3:	mov	r1,r3		! OPQR
+	shlr16	r3
+	shlr8	r3		! xxxO
+	mov.l	@(r0,r5),r1	! KLMN
+	mov	r1,r6
+	shll8	r6		! LMNx
+	or	r6,r3		! LMNO
+	cmp/hi	r2,r0
+	bt/s	3b
+	 mov.l	r3,@-r0
+#endif
+	!
+	! Third, copy a byte at once, if necessary
+	cmp/eq	r4,r0
+	bt/s	9b
+	 add	#4,r5
+	bra	8b
+	 add	#-6,r2
+
+case2:
+	!
+	!	GHIJ KLMN OPQR -->  ..GH IJKL MNOP QR..
+	!
+	! First, align to word boundary
+	tst	#1,r0
+	bt/s	2f
+	 add	#-1,r5
+	mov.b	@(r0,r5),r1
+	mov.b	r1,@-r0
+	!
+2:	! Second, read a word and write a word at once
+	add	#-1,r5
+	mov	r4,r2
+	add	#3,r2
+	!
+3:	mov.w	@(r0,r5),r1
+	cmp/hi	r2,r0
+	bt/s	3b
+	 mov.w	r1,@-r0
+	!
+	! Third, copy a byte at once, if necessary
+	cmp/eq	r4,r0
+	bt/s	9b
+	 add	#1,r5
+	mov.b	@(r0,r5),r1
+	rts
+	 mov.b	r1,@-r0
+
+case3:
+	!
+	!	GHIJ KLMN OPQR -->  .GHI JKLM NOPQ R...
+	!
+	! First, align to long word boundary
+	mov	r0,r3
+	and	r2,r3
+	tst	r3,r3
+	bt/s	2f
+	 add	#-1,r5
+1:	dt	r3
+	mov.b	@(r0,r5),r1
+	bf/s	1b
+	 mov.b	r1,@-r0
+	!
+2:	! Second, read a long word and write a long word at once
+	add	#-2,r5
+	mov.l	@(r0,r5),r1
+	add	#-4,r5
+	mov	r4,r2
+	add	#7,r2
+	!
+#ifdef __LITTLE_ENDIAN__
+3:	mov	r1,r3		! RQPO
+	shll8	r3		! QPOx
+	mov.l	@(r0,r5),r1	! NMLK
+	mov	r1,r6
+	shlr16	r6
+	shlr8	r6		! xxxN
+	or	r6,r3		! QPON
+	cmp/hi	r2,r0
+	bt/s	3b
+	 mov.l	r3,@-r0
+#else
+3:	mov	r1,r3		! OPQR
+	shlr8	r3		! xOPQ
+	mov.l	@(r0,r5),r1	! KLMN
+	mov	r1,r6
+	shll16	r6
+	shll8	r6		! Nxxx
+	or	r6,r3		! NOPQ
+	cmp/hi	r2,r0
+	bt/s	3b
+	 mov.l	r3,@-r0
+#endif
+	!
+	! Third, copy a byte at once, if necessary
+	cmp/eq	r4,r0
+	bt/s	9b
+	 add	#6,r5
+	bra	8b
+	 add	#-6,r2
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/memmove.S b/src/kernel/linux/v4.14/arch/sh/lib/memmove.S
new file mode 100644
index 0000000..bdca321
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/memmove.S
@@ -0,0 +1,255 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* $Id: memmove.S,v 1.2 2001/07/27 11:51:09 gniibe Exp $
+ *
+ * "memmove" implementation of SuperH
+ *
+ * Copyright (C) 1999  Niibe Yutaka
+ *
+ */
+
+/*
+ * void *memmove(void *dst, const void *src, size_t n);
+ * The memory areas may overlap.
+ */
+
+#include <linux/linkage.h>
+ENTRY(memmove)
+	! if dest > src, call memcpy (it copies in decreasing order)
+	cmp/hi	r5,r4
+	bf	1f
+	mov.l	2f,r0
+	jmp	@r0
+	 nop
+	.balign 4
+2:	.long	memcpy
+1:
+	sub	r5,r4		! From here, r4 has the distance to r0
+	tst	r6,r6
+	bt/s	9f		! if n=0, do nothing
+	 mov	r5,r0
+	add	r6,r5
+	mov	#12,r1
+	cmp/gt	r6,r1
+	bt/s	8f		! if it's too small, copy a byte at once
+	 add	#-1,r4
+	add	#1,r4
+	!
+	!                [ ...  ] DST             [ ...  ] SRC
+	!	         [ ...  ]                 [ ...  ]
+	!	           :                        :
+	!      r0+r4-->  [ ...  ]       r0    --> [ ...  ]
+	!	           :                        :
+	!	         [ ...  ]                 [ ...  ]
+	!			        r5    -->
+	!
+	mov	r4,r1
+	mov	#3,r2
+	and	r2,r1
+	shll2	r1
+	mov	r0,r3		! Save the value on R0 to R3
+	mova	jmptable,r0
+	add	r1,r0
+	mov.l	@r0,r1
+	jmp	@r1
+	 mov	r3,r0		! and back to R0
+	.balign	4
+jmptable:
+	.long	case0
+	.long	case1
+	.long	case2
+	.long	case3
+
+	! copy a byte at once
+8:	mov.b	@r0+,r1
+	cmp/hs	r5,r0
+	bf/s	8b			! while (r0<r5)
+	 mov.b	r1,@(r0,r4)
+	add	#1,r4
+9:
+	add	r4,r0
+	rts
+	 sub	r6,r0
+
+case_none:
+	bra	8b
+	 add	#-1,r4
+
+case0:
+	!
+	!	GHIJ KLMN OPQR -->  GHIJ KLMN OPQR
+	!
+	! First, align to long word boundary
+	mov	r0,r3
+	and	r2,r3
+	tst	r3,r3
+	bt/s	2f
+	 add	#-1,r4
+	mov	#4,r2
+	sub	r3,r2
+1:	dt	r2
+	mov.b	@r0+,r1
+	bf/s	1b
+	 mov.b	r1,@(r0,r4)
+	!
+2:	! Second, copy a long word at once
+	add	#-3,r4
+	add	#-3,r5
+3:	mov.l	@r0+,r1
+	cmp/hs	r5,r0
+	bf/s	3b
+	 mov.l	r1,@(r0,r4)
+	add	#3,r5
+	!
+	! Third, copy a byte at once, if necessary
+	cmp/eq	r5,r0
+	bt/s	9b
+	 add	#4,r4
+	bra	8b
+	 add	#-1,r4
+
+case3:
+	!
+	!	GHIJ KLMN OPQR -->  ...G HIJK LMNO PQR.
+	!
+	! First, align to long word boundary
+	mov	r0,r3
+	and	r2,r3
+	tst	r3,r3
+	bt/s	2f
+	 add	#-1,r4
+	mov	#4,r2
+	sub	r3,r2
+1:	dt	r2
+	mov.b	@r0+,r1
+	bf/s	1b
+	 mov.b	r1,@(r0,r4)
+	!
+2:	! Second, read a long word and write a long word at once
+	add	#-2,r4
+	mov.l	@(r0,r4),r1
+	add	#-7,r5
+	add	#-4,r4
+	!
+#ifdef __LITTLE_ENDIAN__
+	shll8	r1
+3:	mov	r1,r3		! JIHG
+	shlr8	r3		! xJIH
+	mov.l	@r0+,r1		! NMLK
+	mov	r1,r2
+	shll16	r2
+	shll8	r2		! Kxxx
+	or	r2,r3		! KJIH
+	cmp/hs	r5,r0
+	bf/s	3b
+	 mov.l	r3,@(r0,r4)
+#else
+	shlr8	r1
+3:	mov	r1,r3		! GHIJ
+	shll8	r3		! HIJx
+	mov.l	@r0+,r1		! KLMN
+	mov	r1,r2
+	shlr16	r2
+	shlr8	r2		! xxxK
+	or	r2,r3		! HIJK
+	cmp/hs	r5,r0
+	bf/s	3b
+	 mov.l	r3,@(r0,r4)
+#endif
+	add	#7,r5
+	!
+	! Third, copy a byte at once, if necessary
+	cmp/eq	r5,r0
+	bt/s	9b
+	 add	#7,r4
+	add	#-3,r0
+	bra	8b
+	 add	#-1,r4
+
+case2:
+	!
+	!	GHIJ KLMN OPQR -->  ..GH IJKL MNOP QR..
+	!
+	! First, align to word boundary
+	tst	#1,r0
+	bt/s	2f
+	 add	#-1,r4
+	mov.b	@r0+,r1
+	mov.b	r1,@(r0,r4)
+	!
+2:	! Second, read a word and write a word at once
+	add	#-1,r4
+	add	#-1,r5
+	!
+3:	mov.w	@r0+,r1
+	cmp/hs	r5,r0
+	bf/s	3b
+	 mov.w	r1,@(r0,r4)
+	add	#1,r5
+	!
+	! Third, copy a byte at once, if necessary
+	cmp/eq	r5,r0
+	bt/s	9b
+	 add	#2,r4
+	mov.b	@r0,r1
+	mov.b	r1,@(r0,r4)
+	bra	9b
+	 add	#1,r0
+
+case1:
+	!
+	!	GHIJ KLMN OPQR -->  .GHI JKLM NOPQ R...
+	!
+	! First, align to long word boundary
+	mov	r0,r3
+	and	r2,r3
+	tst	r3,r3
+	bt/s	2f
+	 add	#-1,r4
+	mov	#4,r2
+	sub	r3,r2
+1:	dt	r2
+	mov.b	@r0+,r1
+	bf/s	1b
+	 mov.b	r1,@(r0,r4)
+	!
+2:	! Second, read a long word and write a long word at once
+	mov.l	@(r0,r4),r1
+	add	#-7,r5
+	add	#-4,r4
+	!
+#ifdef __LITTLE_ENDIAN__
+	shll16	r1
+	shll8	r1
+3:	mov	r1,r3		! JIHG
+	shlr16	r3
+	shlr8	r3		! xxxJ
+	mov.l	@r0+,r1		! NMLK
+	mov	r1,r2
+	shll8	r2		! MLKx
+	or	r2,r3		! MLKJ
+	cmp/hs	r5,r0
+	bf/s	3b
+	 mov.l	r3,@(r0,r4)
+#else
+	shlr16	r1
+	shlr8	r1
+3:	mov	r1,r3		! GHIJ
+	shll16	r3
+	shll8	r3		! Jxxx
+	mov.l	@r0+,r1		! KLMN
+	mov	r1,r2
+	shlr8	r2		! xKLM
+	or	r2,r3		! JKLM
+	cmp/hs	r5,r0
+	bf/s	3b		! while(r0<r5)
+	 mov.l	r3,@(r0,r4)
+#endif
+	add	#7,r5
+	!
+	! Third, copy a byte at once, if necessary
+	cmp/eq	r5,r0
+	bt/s	9b
+	 add	#5,r4
+	add	#-3,r0
+	bra	8b
+	 add	#-1,r4
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/memset-sh4.S b/src/kernel/linux/v4.14/arch/sh/lib/memset-sh4.S
new file mode 100644
index 0000000..10649c4
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/memset-sh4.S
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * "memset" implementation for SH4
+ *
+ * Copyright (C) 1999  Niibe Yutaka
+ * Copyright (c) 2009  STMicroelectronics Limited
+ * Author: Stuart Menefy <stuart.menefy:st.com>
+ */
+
+/*
+ *            void *memset(void *s, int c, size_t n);
+ */
+
+#include <linux/linkage.h>
+
+ENTRY(memset)
+	mov	#12,r0
+	add	r6,r4
+	cmp/gt	r6,r0
+	bt/s	40f		! if it's too small, set a byte at once
+	 mov	r4,r0
+	and	#3,r0
+	cmp/eq	#0,r0
+	bt/s	2f		! It's aligned
+	 sub	r0,r6
+1:
+	dt	r0
+	bf/s	1b
+	 mov.b	r5,@-r4
+2:				! make VVVV
+	extu.b	r5,r5
+	swap.b	r5,r0		!   V0
+	or	r0,r5		!   VV
+	swap.w	r5,r0		! VV00
+	or	r0,r5		! VVVV
+
+	! Check if enough bytes need to be copied to be worth the big loop
+	mov	#0x40, r0	! (MT)
+	cmp/gt	r6,r0		! (MT)  64 > len => slow loop
+
+	bt/s	22f
+	 mov	r6,r0
+
+	! align the dst to the cache block size if necessary
+	mov	r4, r3
+	mov	#~(0x1f), r1
+
+	and	r3, r1
+	cmp/eq	r3, r1
+
+	bt/s	11f		! dst is already aligned
+	 sub	r1, r3		! r3-r1 -> r3
+	shlr2	r3		! number of loops
+
+10:	mov.l	r5,@-r4
+	dt	r3
+	bf/s	10b
+	 add	#-4, r6
+
+11:	! dst is 32byte aligned
+	mov	r6,r2
+	mov	#-5,r0
+	shld	r0,r2		! number of loops
+
+	add	#-32, r4
+	mov	r5, r0
+12:
+	movca.l	r0,@r4
+	mov.l	r5,@(4, r4)
+	mov.l	r5,@(8, r4)
+	mov.l	r5,@(12,r4)
+	mov.l	r5,@(16,r4)
+	mov.l	r5,@(20,r4)
+	add	#-0x20, r6
+	mov.l	r5,@(24,r4)
+	dt	r2
+	mov.l	r5,@(28,r4)
+	bf/s	12b
+	 add	#-32, r4
+
+	add	#32, r4
+	mov	#8, r0
+	cmp/ge	r0, r6
+	bf	40f
+
+	mov	r6,r0
+22:
+	shlr2	r0
+	shlr	r0		! r0 = r6 >> 3
+3:
+	dt	r0
+	mov.l	r5,@-r4		! set 8-byte at once
+	bf/s	3b
+	 mov.l	r5,@-r4
+	!
+	mov	#7,r0
+	and	r0,r6
+
+	! fill bytes (length may be zero)
+40:	tst	r6,r6
+	bt	5f
+4:
+	dt	r6
+	bf/s	4b
+	 mov.b	r5,@-r4
+5:
+	rts
+	 mov	r4,r0
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/memset.S b/src/kernel/linux/v4.14/arch/sh/lib/memset.S
new file mode 100644
index 0000000..a6d5ec0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/memset.S
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* $Id: memset.S,v 1.1 2000/04/14 16:49:01 mjd Exp $
+ *
+ * "memset" implementation of SuperH
+ *
+ * Copyright (C) 1999  Niibe Yutaka
+ *
+ */
+
+/*
+ *            void *memset(void *s, int c, size_t n);
+ */
+
+#include <linux/linkage.h>
+
+ENTRY(memset)
+	tst	r6,r6
+	bt/s	5f		! if n=0, do nothing
+	 add	r6,r4
+	mov	#12,r0
+	cmp/gt	r6,r0
+	bt/s	4f		! if it's too small, set a byte at once
+	 mov	r4,r0
+	and	#3,r0
+	cmp/eq	#0,r0
+	bt/s	2f		! It's aligned
+	 sub	r0,r6
+1:
+	dt	r0
+	bf/s	1b
+	 mov.b	r5,@-r4
+2:				! make VVVV
+	extu.b	r5,r5
+	swap.b	r5,r0		!   V0
+	or	r0,r5		!   VV
+	swap.w	r5,r0		! VV00
+	or	r0,r5		! VVVV
+	!
+	mov	r6,r0
+	shlr2	r0
+	shlr	r0		! r0 = r6 >> 3
+3:
+	dt	r0
+	mov.l	r5,@-r4		! set 8-byte at once
+	bf/s	3b
+	 mov.l	r5,@-r4
+	!
+	mov	#7,r0
+	and	r0,r6
+	tst	r6,r6
+	bt	5f
+	! fill bytes
+4:
+	dt	r6
+	bf/s	4b
+	 mov.b	r5,@-r4
+5:
+	rts
+	 mov	r4,r0
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/movmem.S b/src/kernel/linux/v4.14/arch/sh/lib/movmem.S
new file mode 100644
index 0000000..62075f6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/movmem.S
@@ -0,0 +1,238 @@
+/* Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
+   2004, 2005, 2006
+   Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file.  (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING.  If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.  */
+
+!! libgcc routines for the Renesas / SuperH SH CPUs.
+!! Contributed by Steve Chamberlain.
+!! sac@cygnus.com
+
+!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
+!! recoded in assembly by Toshiyasu Morita
+!! tm@netcom.com
+
+/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
+   ELF local label prefixes by J"orn Rennecke
+   amylaar@cygnus.com  */
+
+	.text
+	.balign	4
+	.global	__movmem
+	.global __movstr
+	.set __movstr, __movmem	
+	/* This would be a lot simpler if r6 contained the byte count
+	   minus 64, and we wouldn't be called here for a byte count of 64.  */
+__movmem:
+	sts.l	pr,@-r15
+	shll2	r6
+	bsr	__movmemSI52+2
+	mov.l	@(48,r5),r0
+	.balign	4
+movmem_loop: /* Reached with rts */
+	mov.l	@(60,r5),r0
+	add	#-64,r6
+	mov.l	r0,@(60,r4)
+	tst	r6,r6
+	mov.l	@(56,r5),r0
+	bt	movmem_done
+	mov.l	r0,@(56,r4)
+	cmp/pl	r6
+	mov.l	@(52,r5),r0
+	add	#64,r5
+	mov.l	r0,@(52,r4)
+	add	#64,r4
+	bt	__movmemSI52
+! done all the large groups, do the remainder
+! jump to movmem+
+	mova	__movmemSI4+4,r0
+	add	r6,r0
+	jmp	@r0
+movmem_done: ! share slot insn, works out aligned.
+	lds.l	@r15+,pr
+	mov.l	r0,@(56,r4)
+	mov.l	@(52,r5),r0
+	rts
+	mov.l	r0,@(52,r4)
+	.balign	4
+
+	.global	__movmemSI64
+	.global __movstrSI64
+	.set	__movstrSI64, __movmemSI64
+__movmemSI64:
+	mov.l	@(60,r5),r0
+	mov.l	r0,@(60,r4)
+	.global	__movmemSI60
+	.global __movstrSI60
+	.set	__movstrSI60, __movmemSI60
+__movmemSI60:
+	mov.l	@(56,r5),r0
+	mov.l	r0,@(56,r4)
+	.global	__movmemSI56
+	.global __movstrSI56
+	.set	__movstrSI56, __movmemSI56
+__movmemSI56:
+	mov.l	@(52,r5),r0
+	mov.l	r0,@(52,r4)
+	.global	__movmemSI52
+	.global __movstrSI52
+	.set	__movstrSI52, __movmemSI52
+__movmemSI52:
+	mov.l	@(48,r5),r0
+	mov.l	r0,@(48,r4)
+	.global	__movmemSI48
+	.global	__movstrSI48
+	.set	__movstrSI48, __movmemSI48
+__movmemSI48:
+	mov.l	@(44,r5),r0
+	mov.l	r0,@(44,r4)
+	.global	__movmemSI44
+	.global	__movstrSI44
+	.set	__movstrSI44, __movmemSI44
+__movmemSI44:
+	mov.l	@(40,r5),r0
+	mov.l	r0,@(40,r4)
+	.global	__movmemSI40
+	.global __movstrSI40
+	.set	__movstrSI40, __movmemSI40
+__movmemSI40:
+	mov.l	@(36,r5),r0
+	mov.l	r0,@(36,r4)
+	.global	__movmemSI36
+	.global	__movstrSI36
+	.set	__movstrSI36, __movmemSI36
+__movmemSI36:
+	mov.l	@(32,r5),r0
+	mov.l	r0,@(32,r4)
+	.global	__movmemSI32
+	.global	__movstrSI32
+	.set	__movstrSI32, __movmemSI32
+__movmemSI32:
+	mov.l	@(28,r5),r0
+	mov.l	r0,@(28,r4)
+	.global	__movmemSI28
+	.global	__movstrSI28
+	.set	__movstrSI28, __movmemSI28
+__movmemSI28:
+	mov.l	@(24,r5),r0
+	mov.l	r0,@(24,r4)
+	.global	__movmemSI24
+	.global	__movstrSI24
+	.set	__movstrSI24, __movmemSI24
+__movmemSI24:
+	mov.l	@(20,r5),r0
+	mov.l	r0,@(20,r4)
+	.global	__movmemSI20
+	.global	__movstrSI20
+	.set	__movstrSI20, __movmemSI20
+__movmemSI20:
+	mov.l	@(16,r5),r0
+	mov.l	r0,@(16,r4)
+	.global	__movmemSI16
+	.global	__movstrSI16
+	.set	__movstrSI16, __movmemSI16
+__movmemSI16:
+	mov.l	@(12,r5),r0
+	mov.l	r0,@(12,r4)
+	.global	__movmemSI12
+	.global	__movstrSI12
+	.set	__movstrSI12, __movmemSI12
+__movmemSI12:
+	mov.l	@(8,r5),r0
+	mov.l	r0,@(8,r4)
+	.global	__movmemSI8
+	.global	__movstrSI8
+	.set	__movstrSI8, __movmemSI8
+__movmemSI8:
+	mov.l	@(4,r5),r0
+	mov.l	r0,@(4,r4)
+	.global	__movmemSI4
+	.global	__movstrSI4
+	.set	__movstrSI4, __movmemSI4
+__movmemSI4:
+	mov.l	@(0,r5),r0
+	rts
+	mov.l	r0,@(0,r4)
+
+	.global	__movmem_i4_even
+	.global	__movstr_i4_even
+	.set	__movstr_i4_even, __movmem_i4_even
+
+	.global	__movmem_i4_odd
+	.global	__movstr_i4_odd
+	.set	__movstr_i4_odd, __movmem_i4_odd
+
+	.global	__movmemSI12_i4
+	.global	__movstrSI12_i4
+	.set	__movstrSI12_i4, __movmemSI12_i4
+
+	.p2align	5
+L_movmem_2mod4_end:
+	mov.l	r0,@(16,r4)
+	rts
+	mov.l	r1,@(20,r4)
+
+	.p2align	2
+
+__movmem_i4_even:
+	mov.l	@r5+,r0
+	bra	L_movmem_start_even
+	mov.l	@r5+,r1
+
+__movmem_i4_odd:
+	mov.l	@r5+,r1
+	add	#-4,r4
+	mov.l	@r5+,r2
+	mov.l	@r5+,r3
+	mov.l	r1,@(4,r4)
+	mov.l	r2,@(8,r4)
+
+L_movmem_loop:
+	mov.l	r3,@(12,r4)
+	dt	r6
+	mov.l	@r5+,r0
+	bt/s	L_movmem_2mod4_end
+	mov.l	@r5+,r1
+	add	#16,r4
+L_movmem_start_even:
+	mov.l	@r5+,r2
+	mov.l	@r5+,r3
+	mov.l	r0,@r4
+	dt	r6
+	mov.l	r1,@(4,r4)
+	bf/s	L_movmem_loop
+	mov.l	r2,@(8,r4)
+	rts
+	mov.l	r3,@(12,r4)
+
+	.p2align	4
+__movmemSI12_i4:
+	mov.l	@r5,r0
+	mov.l	@(4,r5),r1
+	mov.l	@(8,r5),r2
+	mov.l	r0,@r4
+	mov.l	r1,@(4,r4)
+	rts
+	mov.l	r2,@(8,r4)
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/strlen.S b/src/kernel/linux/v4.14/arch/sh/lib/strlen.S
new file mode 100644
index 0000000..80ea53d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/strlen.S
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* $Id: strlen.S,v 1.2 2001/06/29 14:07:15 gniibe Exp $
+ *
+ * "strlen" implementation of SuperH
+ *
+ * Copyright (C) 1999  Kaz Kojima
+ *
+ */
+
+/* size_t strlen (const char *s)  */
+
+#include <linux/linkage.h>
+ENTRY(strlen)
+	mov	r4,r0
+	and	#3,r0
+	tst	r0,r0
+	bt/s	1f
+	 mov	#0,r2
+
+	add	#-1,r0
+	shll2	r0
+	shll	r0
+	braf	r0
+	 nop
+
+	mov.b	@r4+,r1
+	tst	r1,r1
+	bt	8f
+	add	#1,r2
+
+	mov.b	@r4+,r1
+	tst	r1,r1
+	bt	8f
+	add	#1,r2
+
+	mov.b	@r4+,r1
+	tst	r1,r1
+	bt	8f
+	add	#1,r2
+
+1:
+	mov	#0,r3
+2:
+	mov.l	@r4+,r1
+	cmp/str	r3,r1
+	bf/s	2b
+	 add	#4,r2
+
+	add	#-4,r2
+#ifndef __LITTLE_ENDIAN__
+	swap.b	r1,r1
+	swap.w	r1,r1
+	swap.b	r1,r1
+#endif
+	extu.b	r1,r0
+	tst	r0,r0
+	bt/s	8f
+	 shlr8	r1
+	add	#1,r2
+	extu.b	r1,r0
+	tst	r0,r0
+	bt/s	8f
+	 shlr8	r1
+	add	#1,r2
+	extu.b	r1,r0
+	tst	r0,r0
+	bt	8f
+	add	#1,r2
+8:
+	rts
+	 mov	r2,r0
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/udiv_qrnnd.S b/src/kernel/linux/v4.14/arch/sh/lib/udiv_qrnnd.S
new file mode 100644
index 0000000..32b9a36
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/udiv_qrnnd.S
@@ -0,0 +1,81 @@
+/* Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
+   2004, 2005, 2006
+   Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file.  (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING.  If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.  */
+
+!! libgcc routines for the Renesas / SuperH SH CPUs.
+!! Contributed by Steve Chamberlain.
+!! sac@cygnus.com
+
+!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
+!! recoded in assembly by Toshiyasu Morita
+!! tm@netcom.com
+
+/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
+   ELF local label prefixes by J"orn Rennecke
+   amylaar@cygnus.com  */
+
+	/* r0: rn r1: qn */ /* r0: n1 r4: n0 r5: d r6: d1 */ /* r2: __m */
+	/* n1 < d, but n1 might be larger than d1.  */
+	.global __udiv_qrnnd_16
+	.balign 8
+__udiv_qrnnd_16:
+	div0u
+	cmp/hi r6,r0
+	bt .Lots
+	.rept 16
+	div1 r6,r0 
+	.endr
+	extu.w r0,r1
+	bt 0f
+	add r6,r0
+0:	rotcl r1
+	mulu.w r1,r5
+	xtrct r4,r0
+	swap.w r0,r0
+	sts macl,r2
+	cmp/hs r2,r0
+	sub r2,r0
+	bt 0f
+	addc r5,r0
+	add #-1,r1
+	bt 0f
+1:	add #-1,r1
+	rts
+	add r5,r0
+	.balign 8
+.Lots:
+	sub r5,r0
+	swap.w r4,r1
+	xtrct r0,r1
+	clrt
+	mov r1,r0
+	addc r5,r0
+	mov #-1,r1
+	bf/s 1b
+	 shlr16 r1
+0:	rts
+	 nop
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/udivsi3.S b/src/kernel/linux/v4.14/arch/sh/lib/udivsi3.S
new file mode 100644
index 0000000..72157ab
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/udivsi3.S
@@ -0,0 +1,87 @@
+/* Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
+   2004, 2005
+   Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file.  (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING.  If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.  */
+
+!! libgcc routines for the Renesas / SuperH SH CPUs.
+!! Contributed by Steve Chamberlain.
+!! sac@cygnus.com
+
+	.balign 4
+	.global	__udivsi3
+	.type	__udivsi3, @function
+div8:
+	div1 r5,r4
+div7:
+	div1 r5,r4; div1 r5,r4; div1 r5,r4
+	div1 r5,r4; div1 r5,r4; div1 r5,r4; rts; div1 r5,r4
+
+divx4:
+	div1 r5,r4; rotcl r0
+	div1 r5,r4; rotcl r0
+	div1 r5,r4; rotcl r0
+	rts; div1 r5,r4
+
+__udivsi3:
+	sts.l pr,@-r15
+	extu.w r5,r0
+	cmp/eq r5,r0
+	bf/s large_divisor
+	div0u
+	swap.w r4,r0
+	shlr16 r4
+	bsr div8
+	shll16 r5
+	bsr div7
+	div1 r5,r4
+	xtrct r4,r0
+	xtrct r0,r4
+	bsr div8
+	swap.w r4,r4
+	bsr div7
+	div1 r5,r4
+	lds.l @r15+,pr
+	xtrct r4,r0
+	swap.w r0,r0
+	rotcl r0
+	rts
+	shlr16 r5
+
+large_divisor:
+	mov #0,r0
+	xtrct r4,r0
+	xtrct r0,r4
+	bsr divx4
+	rotcl r0
+	bsr divx4
+	rotcl r0
+	bsr divx4
+	rotcl r0
+	bsr divx4
+	rotcl r0
+	lds.l @r15+,pr
+	rts
+	rotcl r0
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/udivsi3_i4i-Os.S b/src/kernel/linux/v4.14/arch/sh/lib/udivsi3_i4i-Os.S
new file mode 100644
index 0000000..4835553
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/udivsi3_i4i-Os.S
@@ -0,0 +1,149 @@
+/* Copyright (C) 2006 Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file.  (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING.  If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.  */
+
+/* Moderately Space-optimized libgcc routines for the Renesas SH /
+   STMicroelectronics ST40 CPUs.
+   Contributed by J"orn Rennecke joern.rennecke@st.com.  */
+
+/* Size: 186 bytes jointly for udivsi3_i4i and sdivsi3_i4i
+   sh4-200 run times:
+   udiv small divisor: 55 cycles
+   udiv large divisor: 52 cycles
+   sdiv small divisor, positive result: 59 cycles
+   sdiv large divisor, positive result: 56 cycles
+   sdiv small divisor, negative result: 65 cycles (*)
+   sdiv large divisor, negative result: 62 cycles (*)
+   (*): r2 is restored in the rts delay slot and has a lingering latency
+        of two more cycles.  */
+	.balign 4
+	.global	__udivsi3_i4i
+	.global	__udivsi3_i4
+	.set	__udivsi3_i4, __udivsi3_i4i
+	.type	__udivsi3_i4i, @function
+	.type	__sdivsi3_i4i, @function
+__udivsi3_i4i:
+	sts pr,r1
+	mov.l r4,@-r15
+	extu.w r5,r0
+	cmp/eq r5,r0
+	swap.w r4,r0
+	shlr16 r4
+	bf/s large_divisor
+	div0u
+	mov.l r5,@-r15
+	shll16 r5
+sdiv_small_divisor:
+	div1 r5,r4
+	bsr div6
+	div1 r5,r4
+	div1 r5,r4
+	bsr div6
+	div1 r5,r4
+	xtrct r4,r0
+	xtrct r0,r4
+	bsr div7
+	swap.w r4,r4
+	div1 r5,r4
+	bsr div7
+	div1 r5,r4
+	xtrct r4,r0
+	mov.l @r15+,r5
+	swap.w r0,r0
+	mov.l @r15+,r4
+	jmp @r1
+	rotcl r0
+div7:
+	div1 r5,r4
+div6:
+	            div1 r5,r4; div1 r5,r4; div1 r5,r4
+	div1 r5,r4; div1 r5,r4; rts;        div1 r5,r4
+
+divx3:
+	rotcl r0
+	div1 r5,r4
+	rotcl r0
+	div1 r5,r4
+	rotcl r0
+	rts
+	div1 r5,r4
+
+large_divisor:
+	mov.l r5,@-r15
+sdiv_large_divisor:
+	xor r4,r0
+	.rept 4
+	rotcl r0
+	bsr divx3
+	div1 r5,r4
+	.endr
+	mov.l @r15+,r5
+	mov.l @r15+,r4
+	jmp @r1
+	rotcl r0
+
+	.global	__sdivsi3_i4i
+	.global __sdivsi3_i4
+	.global __sdivsi3
+	.set	__sdivsi3_i4, __sdivsi3_i4i
+	.set	__sdivsi3, __sdivsi3_i4i
+__sdivsi3_i4i:
+	mov.l r4,@-r15
+	cmp/pz r5
+	mov.l r5,@-r15
+	bt/s pos_divisor
+	cmp/pz r4
+	neg r5,r5
+	extu.w r5,r0
+	bt/s neg_result
+	cmp/eq r5,r0
+	neg r4,r4
+pos_result:
+	swap.w r4,r0
+	bra sdiv_check_divisor
+	sts pr,r1
+pos_divisor:
+	extu.w r5,r0
+	bt/s pos_result
+	cmp/eq r5,r0
+	neg r4,r4
+neg_result:
+	mova negate_result,r0
+	;
+	mov r0,r1
+	swap.w r4,r0
+	lds r2,macl
+	sts pr,r2
+sdiv_check_divisor:
+	shlr16 r4
+	bf/s sdiv_large_divisor
+	div0u
+	bra sdiv_small_divisor
+	shll16 r5
+	.balign 4
+negate_result:
+	neg r0,r0
+	jmp @r2
+	sts macl,r2
diff --git a/src/kernel/linux/v4.14/arch/sh/lib/udivsi3_i4i.S b/src/kernel/linux/v4.14/arch/sh/lib/udivsi3_i4i.S
new file mode 100644
index 0000000..f1a79d9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib/udivsi3_i4i.S
@@ -0,0 +1,666 @@
+/* Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
+   2004, 2005, 2006
+   Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file.  (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING.  If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.  */
+
+!! libgcc routines for the Renesas / SuperH SH CPUs.
+!! Contributed by Steve Chamberlain.
+!! sac@cygnus.com
+
+!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
+!! recoded in assembly by Toshiyasu Morita
+!! tm@netcom.com
+
+/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
+   ELF local label prefixes by J"orn Rennecke
+   amylaar@cygnus.com  */
+
+/* This code used shld, thus is not suitable for SH1 / SH2.  */
+
+/* Signed / unsigned division without use of FPU, optimized for SH4.
+   Uses a lookup table for divisors in the range -128 .. +128, and
+   div1 with case distinction for larger divisors in three more ranges.
+   The code is lumped together with the table to allow the use of mova.  */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define L_LSB 0
+#define L_LSWMSB 1
+#define L_MSWLSB 2
+#else
+#define L_LSB 3
+#define L_LSWMSB 2
+#define L_MSWLSB 1
+#endif
+
+	.balign 4
+	.global	__udivsi3_i4i
+	.global	__udivsi3_i4
+	.set	__udivsi3_i4, __udivsi3_i4i
+	.type	__udivsi3_i4i, @function
+__udivsi3_i4i:
+	mov.w c128_w, r1
+	div0u
+	mov r4,r0
+	shlr8 r0
+	cmp/hi r1,r5
+	extu.w r5,r1
+	bf udiv_le128
+	cmp/eq r5,r1
+	bf udiv_ge64k
+	shlr r0
+	mov r5,r1
+	shll16 r5
+	mov.l r4,@-r15
+	div1 r5,r0
+	mov.l r1,@-r15
+	div1 r5,r0
+	div1 r5,r0
+	bra udiv_25
+	div1 r5,r0
+
+div_le128:
+	mova div_table_ix,r0
+	bra div_le128_2
+	mov.b @(r0,r5),r1
+udiv_le128:
+	mov.l r4,@-r15
+	mova div_table_ix,r0
+	mov.b @(r0,r5),r1
+	mov.l r5,@-r15
+div_le128_2:
+	mova div_table_inv,r0
+	mov.l @(r0,r1),r1
+	mov r5,r0
+	tst #0xfe,r0
+	mova div_table_clz,r0
+	dmulu.l r1,r4
+	mov.b @(r0,r5),r1
+	bt/s div_by_1
+	mov r4,r0
+	mov.l @r15+,r5
+	sts mach,r0
+	/* clrt */
+	addc r4,r0
+	mov.l @r15+,r4
+	rotcr r0
+	rts
+	shld r1,r0
+
+div_by_1_neg:
+	neg r4,r0
+div_by_1:
+	mov.l @r15+,r5
+	rts
+	mov.l @r15+,r4
+
+div_ge64k:
+	bt/s div_r8
+	div0u
+	shll8 r5
+	bra div_ge64k_2
+	div1 r5,r0
+udiv_ge64k:
+	cmp/hi r0,r5
+	mov r5,r1
+	bt udiv_r8
+	shll8 r5
+	mov.l r4,@-r15
+	div1 r5,r0
+	mov.l r1,@-r15
+div_ge64k_2:
+	div1 r5,r0
+	mov.l zero_l,r1
+	.rept 4
+	div1 r5,r0
+	.endr
+	mov.l r1,@-r15
+	div1 r5,r0
+	mov.w m256_w,r1
+	div1 r5,r0
+	mov.b r0,@(L_LSWMSB,r15)
+	xor r4,r0
+	and r1,r0
+	bra div_ge64k_end
+	xor r4,r0
+	
+div_r8:
+	shll16 r4
+	bra div_r8_2
+	shll8 r4
+udiv_r8:
+	mov.l r4,@-r15
+	shll16 r4
+	clrt
+	shll8 r4
+	mov.l r5,@-r15
+div_r8_2:
+	rotcl r4
+	mov r0,r1
+	div1 r5,r1
+	mov r4,r0
+	rotcl r0
+	mov r5,r4
+	div1 r5,r1
+	.rept 5
+	rotcl r0; div1 r5,r1
+	.endr
+	rotcl r0
+	mov.l @r15+,r5
+	div1 r4,r1
+	mov.l @r15+,r4
+	rts
+	rotcl r0
+
+	.global	__sdivsi3_i4i
+	.global __sdivsi3_i4
+	.global	__sdivsi3
+	.set	__sdivsi3_i4, __sdivsi3_i4i
+	.set	__sdivsi3, __sdivsi3_i4i
+	.type	__sdivsi3_i4i, @function
+	/* This is link-compatible with a __sdivsi3 call,
+	   but we effectively clobber only r1.  */
+__sdivsi3_i4i:
+	mov.l r4,@-r15
+	cmp/pz r5
+	mov.w c128_w, r1
+	bt/s pos_divisor
+	cmp/pz r4
+	mov.l r5,@-r15
+	neg r5,r5
+	bt/s neg_result
+	cmp/hi r1,r5
+	neg r4,r4
+pos_result:
+	extu.w r5,r0
+	bf div_le128
+	cmp/eq r5,r0
+	mov r4,r0
+	shlr8 r0
+	bf/s div_ge64k
+	cmp/hi r0,r5
+	div0u
+	shll16 r5
+	div1 r5,r0
+	div1 r5,r0
+	div1 r5,r0
+udiv_25:
+	mov.l zero_l,r1
+	div1 r5,r0
+	div1 r5,r0
+	mov.l r1,@-r15
+	.rept 3
+	div1 r5,r0
+	.endr
+	mov.b r0,@(L_MSWLSB,r15)
+	xtrct r4,r0
+	swap.w r0,r0
+	.rept 8
+	div1 r5,r0
+	.endr
+	mov.b r0,@(L_LSWMSB,r15)
+div_ge64k_end:
+	.rept 8
+	div1 r5,r0
+	.endr
+	mov.l @r15+,r4 ! zero-extension and swap using LS unit.
+	extu.b r0,r0
+	mov.l @r15+,r5
+	or r4,r0
+	mov.l @r15+,r4
+	rts
+	rotcl r0
+
+div_le128_neg:
+	tst #0xfe,r0
+	mova div_table_ix,r0
+	mov.b @(r0,r5),r1
+	mova div_table_inv,r0
+	bt/s div_by_1_neg
+	mov.l @(r0,r1),r1
+	mova div_table_clz,r0
+	dmulu.l r1,r4
+	mov.b @(r0,r5),r1
+	mov.l @r15+,r5
+	sts mach,r0
+	/* clrt */
+	addc r4,r0
+	mov.l @r15+,r4
+	rotcr r0
+	shld r1,r0
+	rts
+	neg r0,r0
+
+pos_divisor:
+	mov.l r5,@-r15
+	bt/s pos_result
+	cmp/hi r1,r5
+	neg r4,r4
+neg_result:
+	extu.w r5,r0
+	bf div_le128_neg
+	cmp/eq r5,r0
+	mov r4,r0
+	shlr8 r0
+	bf/s div_ge64k_neg
+	cmp/hi r0,r5
+	div0u
+	mov.l zero_l,r1
+	shll16 r5
+	div1 r5,r0
+	mov.l r1,@-r15
+	.rept 7
+	div1 r5,r0
+	.endr
+	mov.b r0,@(L_MSWLSB,r15)
+	xtrct r4,r0
+	swap.w r0,r0
+	.rept 8
+	div1 r5,r0
+	.endr
+	mov.b r0,@(L_LSWMSB,r15)
+div_ge64k_neg_end:
+	.rept 8
+	div1 r5,r0
+	.endr
+	mov.l @r15+,r4 ! zero-extension and swap using LS unit.
+	extu.b r0,r1
+	mov.l @r15+,r5
+	or r4,r1
+div_r8_neg_end:
+	mov.l @r15+,r4
+	rotcl r1
+	rts
+	neg r1,r0
+
+div_ge64k_neg:
+	bt/s div_r8_neg
+	div0u
+	shll8 r5
+	mov.l zero_l,r1
+	.rept 6
+	div1 r5,r0
+	.endr
+	mov.l r1,@-r15
+	div1 r5,r0
+	mov.w m256_w,r1
+	div1 r5,r0
+	mov.b r0,@(L_LSWMSB,r15)
+	xor r4,r0
+	and r1,r0
+	bra div_ge64k_neg_end
+	xor r4,r0
+
+c128_w:
+	.word 128
+
+div_r8_neg:
+	clrt
+	shll16 r4
+	mov r4,r1
+	shll8 r1
+	mov r5,r4
+	.rept 7
+	rotcl r1; div1 r5,r0
+	.endr
+	mov.l @r15+,r5
+	rotcl r1
+	bra div_r8_neg_end
+	div1 r4,r0
+
+m256_w:
+	.word 0xff00
+/* This table has been generated by divtab-sh4.c.  */
+	.balign 4
+div_table_clz:
+	.byte	0
+	.byte	1
+	.byte	0
+	.byte	-1
+	.byte	-1
+	.byte	-2
+	.byte	-2
+	.byte	-2
+	.byte	-2
+	.byte	-3
+	.byte	-3
+	.byte	-3
+	.byte	-3
+	.byte	-3
+	.byte	-3
+	.byte	-3
+	.byte	-3
+	.byte	-4
+	.byte	-4
+	.byte	-4
+	.byte	-4
+	.byte	-4
+	.byte	-4
+	.byte	-4
+	.byte	-4
+	.byte	-4
+	.byte	-4
+	.byte	-4
+	.byte	-4
+	.byte	-4
+	.byte	-4
+	.byte	-4
+	.byte	-4
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-5
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+	.byte	-6
+/* Lookup table translating positive divisor to index into table of
+   normalized inverse.  N.B. the '0' entry is also the last entry of the
+ previous table, and causes an unaligned access for division by zero.  */
+div_table_ix:
+	.byte	-6
+	.byte	-128
+	.byte	-128
+	.byte	0
+	.byte	-128
+	.byte	-64
+	.byte	0
+	.byte	64
+	.byte	-128
+	.byte	-96
+	.byte	-64
+	.byte	-32
+	.byte	0
+	.byte	32
+	.byte	64
+	.byte	96
+	.byte	-128
+	.byte	-112
+	.byte	-96
+	.byte	-80
+	.byte	-64
+	.byte	-48
+	.byte	-32
+	.byte	-16
+	.byte	0
+	.byte	16
+	.byte	32
+	.byte	48
+	.byte	64
+	.byte	80
+	.byte	96
+	.byte	112
+	.byte	-128
+	.byte	-120
+	.byte	-112
+	.byte	-104
+	.byte	-96
+	.byte	-88
+	.byte	-80
+	.byte	-72
+	.byte	-64
+	.byte	-56
+	.byte	-48
+	.byte	-40
+	.byte	-32
+	.byte	-24
+	.byte	-16
+	.byte	-8
+	.byte	0
+	.byte	8
+	.byte	16
+	.byte	24
+	.byte	32
+	.byte	40
+	.byte	48
+	.byte	56
+	.byte	64
+	.byte	72
+	.byte	80
+	.byte	88
+	.byte	96
+	.byte	104
+	.byte	112
+	.byte	120
+	.byte	-128
+	.byte	-124
+	.byte	-120
+	.byte	-116
+	.byte	-112
+	.byte	-108
+	.byte	-104
+	.byte	-100
+	.byte	-96
+	.byte	-92
+	.byte	-88
+	.byte	-84
+	.byte	-80
+	.byte	-76
+	.byte	-72
+	.byte	-68
+	.byte	-64
+	.byte	-60
+	.byte	-56
+	.byte	-52
+	.byte	-48
+	.byte	-44
+	.byte	-40
+	.byte	-36
+	.byte	-32
+	.byte	-28
+	.byte	-24
+	.byte	-20
+	.byte	-16
+	.byte	-12
+	.byte	-8
+	.byte	-4
+	.byte	0
+	.byte	4
+	.byte	8
+	.byte	12
+	.byte	16
+	.byte	20
+	.byte	24
+	.byte	28
+	.byte	32
+	.byte	36
+	.byte	40
+	.byte	44
+	.byte	48
+	.byte	52
+	.byte	56
+	.byte	60
+	.byte	64
+	.byte	68
+	.byte	72
+	.byte	76
+	.byte	80
+	.byte	84
+	.byte	88
+	.byte	92
+	.byte	96
+	.byte	100
+	.byte	104
+	.byte	108
+	.byte	112
+	.byte	116
+	.byte	120
+	.byte	124
+	.byte	-128
+/* 1/64 .. 1/127, normalized.  There is an implicit leading 1 in bit 32.  */
+	.balign 4
+zero_l:
+	.long	0x0
+	.long	0xF81F81F9
+	.long	0xF07C1F08
+	.long	0xE9131AC0
+	.long	0xE1E1E1E2
+	.long	0xDAE6076C
+	.long	0xD41D41D5
+	.long	0xCD856891
+	.long	0xC71C71C8
+	.long	0xC0E07039
+	.long	0xBACF914D
+	.long	0xB4E81B4F
+	.long	0xAF286BCB
+	.long	0xA98EF607
+	.long	0xA41A41A5
+	.long	0x9EC8E952
+	.long	0x9999999A
+	.long	0x948B0FCE
+	.long	0x8F9C18FA
+	.long	0x8ACB90F7
+	.long	0x86186187
+	.long	0x81818182
+	.long	0x7D05F418
+	.long	0x78A4C818
+	.long	0x745D1746
+	.long	0x702E05C1
+	.long	0x6C16C16D
+	.long	0x68168169
+	.long	0x642C8591
+	.long	0x60581606
+	.long	0x5C9882BA
+	.long	0x58ED2309
+div_table_inv:
+	.long	0x55555556
+	.long	0x51D07EAF
+	.long	0x4E5E0A73
+	.long	0x4AFD6A06
+	.long	0x47AE147B
+	.long	0x446F8657
+	.long	0x41414142
+	.long	0x3E22CBCF
+	.long	0x3B13B13C
+	.long	0x38138139
+	.long	0x3521CFB3
+	.long	0x323E34A3
+	.long	0x2F684BDB
+	.long	0x2C9FB4D9
+	.long	0x29E4129F
+	.long	0x27350B89
+	.long	0x24924925
+	.long	0x21FB7813
+	.long	0x1F7047DD
+	.long	0x1CF06ADB
+	.long	0x1A7B9612
+	.long	0x18118119
+	.long	0x15B1E5F8
+	.long	0x135C8114
+	.long	0x11111112
+	.long	0xECF56BF
+	.long	0xC9714FC
+	.long	0xA6810A7
+	.long	0x8421085
+	.long	0x624DD30
+	.long	0x4104105
+	.long	0x2040811
+	/* maximum error: 0.987342 scaled: 0.921875*/
diff --git a/src/kernel/linux/v4.14/arch/sh/lib64/Makefile b/src/kernel/linux/v4.14/arch/sh/lib64/Makefile
new file mode 100644
index 0000000..69779ff
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib64/Makefile
@@ -0,0 +1,17 @@
+#
+# Makefile for the SH-5 specific library files..
+#
+# Copyright (C) 2000, 2001  Paolo Alberelli
+# Copyright (C) 2003 - 2008  Paul Mundt
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+# Panic should really be compiled as PIC
+lib-y  := udelay.o panic.o memcpy.o memset.o \
+	  copy_user_memcpy.o copy_page.o strcpy.o strlen.o
+
+# Extracted from libgcc
+lib-y	+= udivsi3.o udivdi3.o sdivsi3.o
diff --git a/src/kernel/linux/v4.14/arch/sh/lib64/copy_page.S b/src/kernel/linux/v4.14/arch/sh/lib64/copy_page.S
new file mode 100644
index 0000000..0ec6fca
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib64/copy_page.S
@@ -0,0 +1,89 @@
+/*
+   Copyright 2003 Richard Curnow, SuperH (UK) Ltd.
+
+   This file is subject to the terms and conditions of the GNU General Public
+   License.  See the file "COPYING" in the main directory of this archive
+   for more details.
+
+   Tight version of mempy for the case of just copying a page.
+   Prefetch strategy empirically optimised against RTL simulations
+   of SH5-101 cut2 eval chip with Cayman board DDR memory.
+
+   Parameters:
+   r2 : destination effective address (start of page)
+   r3 : source effective address (start of page)
+
+   Always copies 4096 bytes.
+
+   Points to review.
+   * Currently the prefetch is 4 lines ahead and the alloco is 2 lines ahead.
+     It seems like the prefetch needs to be at at least 4 lines ahead to get
+     the data into the cache in time, and the allocos contend with outstanding
+     prefetches for the same cache set, so it's better to have the numbers
+     different.
+   */
+
+	.section .text..SHmedia32,"ax"
+	.little
+
+	.balign 8
+	.global copy_page
+copy_page:
+
+	/* Copy 4096 bytes worth of data from r3 to r2.
+	   Do prefetches 4 lines ahead.
+	   Do alloco 2 lines ahead */
+
+	pta 1f, tr1
+	pta 2f, tr2
+	pta 3f, tr3
+	ptabs r18, tr0
+
+#if 0
+	/* TAKum03020 */
+	ld.q r3, 0x00, r63
+	ld.q r3, 0x20, r63
+	ld.q r3, 0x40, r63
+	ld.q r3, 0x60, r63
+#endif
+	alloco r2, 0x00
+	synco		! TAKum03020
+	alloco r2, 0x20
+	synco		! TAKum03020
+
+	movi 3968, r6
+	add  r2, r6, r6
+	addi r6, 64, r7
+	addi r7, 64, r8
+	sub r3, r2, r60
+	addi r60, 8, r61
+	addi r61, 8, r62
+	addi r62, 8, r23
+	addi r60, 0x80, r22
+
+/* Minimal code size.  The extra branches inside the loop don't cost much
+   because they overlap with the time spent waiting for prefetches to
+   complete. */
+1:
+#if 0
+	/* TAKum03020 */
+	bge/u r2, r6, tr2  ! skip prefetch for last 4 lines
+	ldx.q r2, r22, r63 ! prefetch 4 lines hence
+#endif
+2:
+	bge/u r2, r7, tr3  ! skip alloco for last 2 lines
+	alloco r2, 0x40    ! alloc destination line 2 lines ahead
+	synco		! TAKum03020
+3:
+	ldx.q r2, r60, r36
+	ldx.q r2, r61, r37
+	ldx.q r2, r62, r38
+	ldx.q r2, r23, r39
+	st.q  r2,   0, r36
+	st.q  r2,   8, r37
+	st.q  r2,  16, r38
+	st.q  r2,  24, r39
+	addi r2, 32, r2
+	bgt/l r8, r2, tr1
+
+	blink tr0, r63	   ! return
diff --git a/src/kernel/linux/v4.14/arch/sh/lib64/copy_user_memcpy.S b/src/kernel/linux/v4.14/arch/sh/lib64/copy_user_memcpy.S
new file mode 100644
index 0000000..515f81b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib64/copy_user_memcpy.S
@@ -0,0 +1,218 @@
+! SPDX-License-Identifier: GPL-2.0
+!
+! Fast SH memcpy
+!
+! by Toshiyasu Morita (tm@netcom.com)
+! hacked by J"orn Rernnecke (joern.rennecke@superh.com) ("o for o-umlaut)
+! SH5 code Copyright 2002 SuperH Ltd.
+!
+! Entry: ARG0: destination pointer
+!        ARG1: source pointer
+!        ARG2: byte count
+!
+! Exit:  RESULT: destination pointer
+!        any other registers in the range r0-r7: trashed
+!
+! Notes: Usually one wants to do small reads and write a longword, but
+!        unfortunately it is difficult in some cases to concatanate bytes
+!        into a longword on the SH, so this does a longword read and small
+!        writes.
+!
+! This implementation makes two assumptions about how it is called:
+!
+! 1.: If the byte count is nonzero, the address of the last byte to be
+!     copied is unsigned greater than the address of the first byte to
+!     be copied.  This could be easily swapped for a signed comparison,
+!     but the algorithm used needs some comparison.
+!
+! 2.: When there are two or three bytes in the last word of an 11-or-more
+!     bytes memory chunk to b copied, the rest of the word can be read
+!     without side effects.
+!     This could be easily changed by increasing the minimum size of
+!     a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
+!     however, this would cost a few extra cyles on average.
+!     For SHmedia, the assumption is that any quadword can be read in its
+!     enirety if at least one byte is included in the copy.
+
+/* Imported into Linux kernel by Richard Curnow.  This is used to implement the
+   __copy_user function in the general case, so it has to be a distinct
+   function from intra-kernel memcpy to allow for exception fix-ups in the
+   event that the user pointer is bad somewhere in the copy (e.g. due to
+   running off the end of the vma).
+
+   Note, this algorithm will be slightly wasteful in the case where the source
+   and destination pointers are equally aligned, because the stlo/sthi pairs
+   could then be merged back into single stores.  If there are a lot of cache
+   misses, this is probably offset by the stall lengths on the preloads.
+
+*/
+
+/* NOTE : Prefetches removed and allocos guarded by synco to avoid TAKum03020
+ * erratum.  The first two prefetches are nop-ed out to avoid upsetting the
+ * instruction counts used in the jump address calculation.
+ * */
+
+	.section .text..SHmedia32,"ax"
+	.little
+	.balign 32
+	.global copy_user_memcpy
+	.global copy_user_memcpy_end
+copy_user_memcpy:
+
+#define LDUAQ(P,O,D0,D1) ldlo.q P,O,D0; ldhi.q P,O+7,D1
+#define STUAQ(P,O,D0,D1) stlo.q P,O,D0; sthi.q P,O+7,D1
+#define LDUAL(P,O,D0,D1) ldlo.l P,O,D0; ldhi.l P,O+3,D1
+#define STUAL(P,O,D0,D1) stlo.l P,O,D0; sthi.l P,O+3,D1
+
+	nop ! ld.b r3,0,r63 ! TAKum03020
+	pta/l Large,tr0
+	movi 25,r0
+	bgeu/u r4,r0,tr0
+	nsb r4,r0
+	shlli r0,5,r0
+	movi (L1-L0+63*32 + 1) & 0xffff,r1
+	sub r1, r0, r0
+L0:	ptrel r0,tr0
+	add r2,r4,r5
+	ptabs r18,tr1
+	add r3,r4,r6
+	blink tr0,r63
+
+/* Rearranged to make cut2 safe */
+	.balign 8
+L4_7:	/* 4..7 byte memcpy cntd. */
+	stlo.l r2, 0, r0
+	or r6, r7, r6
+	sthi.l r5, -1, r6
+	stlo.l r5, -4, r6
+	blink tr1,r63
+
+	.balign 8
+L1:	/* 0 byte memcpy */
+	nop
+	blink tr1,r63
+	nop
+	nop
+	nop
+	nop
+
+L2_3:	/* 2 or 3 byte memcpy cntd. */
+	st.b r5,-1,r6
+	blink tr1,r63
+
+	/* 1 byte memcpy */
+	ld.b r3,0,r0
+	st.b r2,0,r0
+	blink tr1,r63
+
+L8_15:	/* 8..15 byte memcpy cntd. */
+	stlo.q r2, 0, r0
+	or r6, r7, r6
+	sthi.q r5, -1, r6
+	stlo.q r5, -8, r6
+	blink tr1,r63
+
+	/* 2 or 3 byte memcpy */
+	ld.b r3,0,r0
+	nop ! ld.b r2,0,r63 ! TAKum03020
+	ld.b r3,1,r1
+	st.b r2,0,r0
+	pta/l L2_3,tr0
+	ld.b r6,-1,r6
+	st.b r2,1,r1
+	blink tr0, r63
+
+	/* 4 .. 7 byte memcpy */
+	LDUAL (r3, 0, r0, r1)
+	pta L4_7, tr0
+	ldlo.l r6, -4, r7
+	or r0, r1, r0
+	sthi.l r2, 3, r0
+	ldhi.l r6, -1, r6
+	blink tr0, r63
+
+	/* 8 .. 15 byte memcpy */
+	LDUAQ (r3, 0, r0, r1)
+	pta L8_15, tr0
+	ldlo.q r6, -8, r7
+	or r0, r1, r0
+	sthi.q r2, 7, r0
+	ldhi.q r6, -1, r6
+	blink tr0, r63
+
+	/* 16 .. 24 byte memcpy */
+	LDUAQ (r3, 0, r0, r1)
+	LDUAQ (r3, 8, r8, r9)
+	or r0, r1, r0
+	sthi.q r2, 7, r0
+	or r8, r9, r8
+	sthi.q r2, 15, r8
+	ldlo.q r6, -8, r7
+	ldhi.q r6, -1, r6
+	stlo.q r2, 8, r8
+	stlo.q r2, 0, r0
+	or r6, r7, r6
+	sthi.q r5, -1, r6
+	stlo.q r5, -8, r6
+	blink tr1,r63
+
+Large:
+	! ld.b r2, 0, r63 ! TAKum03020
+	pta/l  Loop_ua, tr1
+	ori r3, -8, r7
+	sub r2, r7, r22
+	sub r3, r2, r6
+	add r2, r4, r5
+	ldlo.q r3, 0, r0
+	addi r5, -16, r5
+	movi 64+8, r27 ! could subtract r7 from that.
+	stlo.q r2, 0, r0
+	sthi.q r2, 7, r0
+	ldx.q r22, r6, r0
+	bgtu/l r27, r4, tr1
+
+	addi r5, -48, r27
+	pta/l Loop_line, tr0
+	addi r6, 64, r36
+	addi r6, -24, r19
+	addi r6, -16, r20
+	addi r6, -8, r21
+
+Loop_line:
+	! ldx.q r22, r36, r63 ! TAKum03020
+	alloco r22, 32
+	synco
+	addi r22, 32, r22
+	ldx.q r22, r19, r23
+	sthi.q r22, -25, r0
+	ldx.q r22, r20, r24
+	ldx.q r22, r21, r25
+	stlo.q r22, -32, r0
+	ldx.q r22, r6,  r0
+	sthi.q r22, -17, r23
+	sthi.q r22,  -9, r24
+	sthi.q r22,  -1, r25
+	stlo.q r22, -24, r23
+	stlo.q r22, -16, r24
+	stlo.q r22,  -8, r25
+	bgeu r27, r22, tr0
+
+Loop_ua:
+	addi r22, 8, r22
+	sthi.q r22, -1, r0
+	stlo.q r22, -8, r0
+	ldx.q r22, r6, r0
+	bgtu/l r5, r22, tr1
+
+	add r3, r4, r7
+	ldlo.q r7, -8, r1
+	sthi.q r22, 7, r0
+	ldhi.q r7, -1, r7
+	ptabs r18,tr1
+	stlo.q r22, 0, r0
+	or r1, r7, r1
+	sthi.q r5, 15, r1
+	stlo.q r5, 8, r1
+	blink tr1, r63
+copy_user_memcpy_end:
+	nop
diff --git a/src/kernel/linux/v4.14/arch/sh/lib64/memcpy.S b/src/kernel/linux/v4.14/arch/sh/lib64/memcpy.S
new file mode 100644
index 0000000..231ea59
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib64/memcpy.S
@@ -0,0 +1,202 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Cloned and hacked for uClibc by Paul Mundt, December 2003 */
+/* Modified by SuperH, Inc. September 2003 */
+!
+! Fast SH memcpy
+!
+! by Toshiyasu Morita (tm@netcom.com)
+! hacked by J"orn Rernnecke (joern.rennecke@superh.com) ("o for o-umlaut)
+! SH5 code Copyright 2002 SuperH Ltd.
+!
+! Entry: ARG0: destination pointer
+!        ARG1: source pointer
+!        ARG2: byte count
+!
+! Exit:  RESULT: destination pointer
+!        any other registers in the range r0-r7: trashed
+!
+! Notes: Usually one wants to do small reads and write a longword, but
+!        unfortunately it is difficult in some cases to concatanate bytes
+!        into a longword on the SH, so this does a longword read and small
+!        writes.
+!
+! This implementation makes two assumptions about how it is called:
+!
+! 1.: If the byte count is nonzero, the address of the last byte to be
+!     copied is unsigned greater than the address of the first byte to
+!     be copied.  This could be easily swapped for a signed comparison,
+!     but the algorithm used needs some comparison.
+!
+! 2.: When there are two or three bytes in the last word of an 11-or-more
+!     bytes memory chunk to b copied, the rest of the word can be read
+!     without side effects.
+!     This could be easily changed by increasing the minimum size of
+!     a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
+!     however, this would cost a few extra cyles on average.
+!     For SHmedia, the assumption is that any quadword can be read in its
+!     enirety if at least one byte is included in the copy.
+!
+
+	.section .text..SHmedia32,"ax"
+	.globl	memcpy
+	.type	memcpy, @function
+	.align	5
+
+memcpy:
+
+#define LDUAQ(P,O,D0,D1) ldlo.q P,O,D0; ldhi.q P,O+7,D1
+#define STUAQ(P,O,D0,D1) stlo.q P,O,D0; sthi.q P,O+7,D1
+#define LDUAL(P,O,D0,D1) ldlo.l P,O,D0; ldhi.l P,O+3,D1
+#define STUAL(P,O,D0,D1) stlo.l P,O,D0; sthi.l P,O+3,D1
+
+	ld.b r3,0,r63
+	pta/l Large,tr0
+	movi 25,r0
+	bgeu/u r4,r0,tr0
+	nsb r4,r0
+	shlli r0,5,r0
+	movi (L1-L0+63*32 + 1) & 0xffff,r1
+	sub r1, r0, r0
+L0:	ptrel r0,tr0
+	add r2,r4,r5
+	ptabs r18,tr1
+	add r3,r4,r6
+	blink tr0,r63
+	
+/* Rearranged to make cut2 safe */
+	.balign 8
+L4_7:	/* 4..7 byte memcpy cntd. */
+	stlo.l r2, 0, r0
+	or r6, r7, r6
+	sthi.l r5, -1, r6
+	stlo.l r5, -4, r6
+	blink tr1,r63
+
+	.balign 8
+L1:	/* 0 byte memcpy */
+	nop
+	blink tr1,r63
+	nop
+	nop
+	nop
+	nop
+
+L2_3:	/* 2 or 3 byte memcpy cntd. */
+	st.b r5,-1,r6
+	blink tr1,r63
+
+	/* 1 byte memcpy */
+	ld.b r3,0,r0
+	st.b r2,0,r0
+	blink tr1,r63
+
+L8_15:	/* 8..15 byte memcpy cntd. */
+	stlo.q r2, 0, r0
+	or r6, r7, r6
+	sthi.q r5, -1, r6
+	stlo.q r5, -8, r6
+	blink tr1,r63
+	
+	/* 2 or 3 byte memcpy */
+	ld.b r3,0,r0
+	ld.b r2,0,r63
+	ld.b r3,1,r1
+	st.b r2,0,r0
+	pta/l L2_3,tr0
+	ld.b r6,-1,r6
+	st.b r2,1,r1
+	blink tr0, r63
+
+	/* 4 .. 7 byte memcpy */
+	LDUAL (r3, 0, r0, r1)
+	pta L4_7, tr0
+	ldlo.l r6, -4, r7
+	or r0, r1, r0
+	sthi.l r2, 3, r0
+	ldhi.l r6, -1, r6
+	blink tr0, r63
+
+	/* 8 .. 15 byte memcpy */
+	LDUAQ (r3, 0, r0, r1)
+	pta L8_15, tr0
+	ldlo.q r6, -8, r7
+	or r0, r1, r0
+	sthi.q r2, 7, r0
+	ldhi.q r6, -1, r6
+	blink tr0, r63
+
+	/* 16 .. 24 byte memcpy */
+	LDUAQ (r3, 0, r0, r1)
+	LDUAQ (r3, 8, r8, r9)
+	or r0, r1, r0
+	sthi.q r2, 7, r0
+	or r8, r9, r8
+	sthi.q r2, 15, r8
+	ldlo.q r6, -8, r7
+	ldhi.q r6, -1, r6
+	stlo.q r2, 8, r8
+	stlo.q r2, 0, r0
+	or r6, r7, r6
+	sthi.q r5, -1, r6
+	stlo.q r5, -8, r6
+	blink tr1,r63
+
+Large:
+	ld.b r2, 0, r63
+	pta/l  Loop_ua, tr1
+	ori r3, -8, r7
+	sub r2, r7, r22
+	sub r3, r2, r6
+	add r2, r4, r5
+	ldlo.q r3, 0, r0
+	addi r5, -16, r5
+	movi 64+8, r27 // could subtract r7 from that.
+	stlo.q r2, 0, r0
+	sthi.q r2, 7, r0
+	ldx.q r22, r6, r0
+	bgtu/l r27, r4, tr1
+
+	addi r5, -48, r27
+	pta/l Loop_line, tr0
+	addi r6, 64, r36
+	addi r6, -24, r19
+	addi r6, -16, r20
+	addi r6, -8, r21
+
+Loop_line:
+	ldx.q r22, r36, r63
+	alloco r22, 32
+	addi r22, 32, r22
+	ldx.q r22, r19, r23
+	sthi.q r22, -25, r0
+	ldx.q r22, r20, r24
+	ldx.q r22, r21, r25
+	stlo.q r22, -32, r0
+	ldx.q r22, r6,  r0
+	sthi.q r22, -17, r23
+	sthi.q r22,  -9, r24
+	sthi.q r22,  -1, r25
+	stlo.q r22, -24, r23
+	stlo.q r22, -16, r24
+	stlo.q r22,  -8, r25
+	bgeu r27, r22, tr0
+
+Loop_ua:
+	addi r22, 8, r22
+	sthi.q r22, -1, r0
+	stlo.q r22, -8, r0
+	ldx.q r22, r6, r0
+	bgtu/l r5, r22, tr1
+
+	add r3, r4, r7
+	ldlo.q r7, -8, r1
+	sthi.q r22, 7, r0
+	ldhi.q r7, -1, r7
+	ptabs r18,tr1
+	stlo.q r22, 0, r0
+	or r1, r7, r1
+	sthi.q r5, 15, r1
+	stlo.q r5, 8, r1
+	blink tr1, r63
+
+	.size memcpy,.-memcpy
diff --git a/src/kernel/linux/v4.14/arch/sh/lib64/memset.S b/src/kernel/linux/v4.14/arch/sh/lib64/memset.S
new file mode 100644
index 0000000..453aa5f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib64/memset.S
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Cloned and hacked for uClibc by Paul Mundt, December 2003 */
+/* Modified by SuperH, Inc. September 2003 */
+!
+! Fast SH memset
+!
+! by Toshiyasu Morita (tm@netcom.com)
+!
+! SH5 code by J"orn Rennecke (joern.rennecke@superh.com)
+! Copyright 2002 SuperH Ltd.
+!
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+#define SHHI shlld
+#define SHLO shlrd
+#else
+#define SHHI shlrd
+#define SHLO shlld
+#endif
+
+	.section .text..SHmedia32,"ax"
+	.globl	memset
+	.type	memset, @function
+
+	.align 5
+
+memset:
+	pta/l multiquad, tr0
+	andi r2, 7, r22
+	ptabs r18, tr2
+	mshflo.b r3,r3,r3
+	add r4, r22, r23
+	mperm.w r3, r63, r3	// Fill pattern now in every byte of r3
+
+	movi 8, r9
+	bgtu/u r23, r9, tr0 // multiquad
+
+	beqi/u r4, 0, tr2       // Return with size 0 - ensures no mem accesses
+	ldlo.q r2, 0, r7
+	shlli r4, 2, r4
+	movi -1, r8
+	SHHI r8, r4, r8
+	SHHI r8, r4, r8
+	mcmv r7, r8, r3
+	stlo.q r2, 0, r3
+	blink tr2, r63
+
+multiquad:
+	pta/l lastquad, tr0
+	stlo.q r2, 0, r3
+	shlri r23, 3, r24
+	add r2, r4, r5
+	beqi/u r24, 1, tr0 // lastquad
+	pta/l loop, tr1
+	sub r2, r22, r25
+	andi r5, -8, r20   // calculate end address and
+	addi r20, -7*8, r8 // loop end address; This might overflow, so we need
+	                   // to use a different test before we start the loop
+	bge/u r24, r9, tr1 // loop
+	st.q r25, 8, r3
+	st.q r20, -8, r3
+	shlri r24, 1, r24
+	beqi/u r24, 1, tr0 // lastquad
+	st.q r25, 16, r3
+	st.q r20, -16, r3
+	beqi/u r24, 2, tr0 // lastquad
+	st.q r25, 24, r3
+	st.q r20, -24, r3
+lastquad:
+	sthi.q r5, -1, r3
+	blink tr2,r63
+
+loop:
+!!!	alloco r25, 32	// QQQ comment out for short-term fix to SHUK #3895.
+			// QQQ commenting out is locically correct, but sub-optimal
+			// QQQ Sean McGoogan - 4th April 2003.
+	st.q r25, 8, r3
+	st.q r25, 16, r3
+	st.q r25, 24, r3
+	st.q r25, 32, r3
+	addi r25, 32, r25
+	bgeu/l r8, r25, tr1 // loop
+
+	st.q r20, -40, r3
+	st.q r20, -32, r3
+	st.q r20, -24, r3
+	st.q r20, -16, r3
+	st.q r20, -8, r3
+	sthi.q r5, -1, r3
+	blink tr2,r63
+
+	.size	memset,.-memset
diff --git a/src/kernel/linux/v4.14/arch/sh/lib64/panic.c b/src/kernel/linux/v4.14/arch/sh/lib64/panic.c
new file mode 100644
index 0000000..38c954e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib64/panic.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2003  Richard Curnow, SuperH UK Limited
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+void
+panic_handler(unsigned long panicPC, unsigned long panicSSR,
+	      unsigned long panicEXPEVT)
+{
+	/* Never return from the panic handler */
+	for (;;) ;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/lib64/sdivsi3.S b/src/kernel/linux/v4.14/arch/sh/lib64/sdivsi3.S
new file mode 100644
index 0000000..b422e23
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib64/sdivsi3.S
@@ -0,0 +1,136 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+	.global	__sdivsi3
+	.global	__sdivsi3_1
+	.global	__sdivsi3_2
+	.section	.text..SHmedia32,"ax"
+	.align	2
+
+	/* inputs: r4,r5 */
+	/* clobbered: r1,r18,r19,r20,r21,r25,tr0 */
+	/* result in r0 */
+__sdivsi3:
+__sdivsi3_1:
+	ptb __div_table,tr0
+	gettr tr0,r20
+
+__sdivsi3_2:
+	nsb r5, r1
+	shlld r5, r1, r25    /* normalize; [-2 ..1, 1..2) in s2.62 */
+	shari r25, 58, r21   /* extract 5(6) bit index (s2.4 with hole -1..1) */
+	/* bubble */
+	ldx.ub r20, r21, r19 /* u0.8 */
+	shari r25, 32, r25   /* normalize to s2.30 */
+	shlli r21, 1, r21
+	muls.l r25, r19, r19 /* s2.38 */
+	ldx.w r20, r21, r21  /* s2.14 */
+	ptabs r18, tr0
+	shari r19, 24, r19   /* truncate to s2.14 */
+	sub r21, r19, r19    /* some 11 bit inverse in s1.14 */
+	muls.l r19, r19, r21 /* u0.28 */
+	sub r63, r1, r1
+	addi r1, 92, r1
+	muls.l r25, r21, r18 /* s2.58 */
+	shlli r19, 45, r19   /* multiply by two and convert to s2.58 */
+	/* bubble */
+	sub r19, r18, r18
+	shari r18, 28, r18   /* some 22 bit inverse in s1.30 */
+	muls.l r18, r25, r0  /* s2.60 */
+	muls.l r18, r4, r25 /* s32.30 */
+	/* bubble */
+	shari r0, 16, r19   /* s-16.44 */
+	muls.l r19, r18, r19 /* s-16.74 */
+	shari r25, 63, r0
+	shari r4, 14, r18   /* s19.-14 */
+	shari r19, 30, r19   /* s-16.44 */
+	muls.l r19, r18, r19 /* s15.30 */
+	xor r21, r0, r21    /* You could also use the constant 1 << 27. */
+	add r21, r25, r21
+	sub r21, r19, r21
+	shard r21, r1, r21
+	sub r21, r0, r0
+	blink tr0, r63
+	
+/* This table has been generated by divtab.c .
+Defects for bias -330:
+   Max defect: 6.081536e-07 at -1.000000e+00
+   Min defect: 2.849516e-08 at 1.030651e+00
+   Max 2nd step defect: 9.606539e-12 at -1.000000e+00
+   Min 2nd step defect: 0.000000e+00 at 0.000000e+00
+   Defect at 1: 1.238659e-07
+   Defect at -2: 1.061708e-07 */
+
+	.balign 2
+	.type	__div_table,@object
+	.size	__div_table,128
+/* negative division constants */
+	.word	-16638
+	.word	-17135
+	.word	-17737
+	.word	-18433
+	.word	-19103
+	.word	-19751
+	.word	-20583
+	.word	-21383
+	.word	-22343
+	.word	-23353
+	.word	-24407
+	.word	-25582
+	.word	-26863
+	.word	-28382
+	.word	-29965
+	.word	-31800
+/* negative division factors */
+	.byte	66
+	.byte	70
+	.byte	75
+	.byte	81
+	.byte	87
+	.byte	93
+	.byte	101
+	.byte	109
+	.byte	119
+	.byte	130
+	.byte	142
+	.byte	156
+	.byte	172
+	.byte	192
+	.byte	214
+	.byte	241
+	.skip 16
+	.global	__div_table
+__div_table:
+	.skip 16
+/* positive division factors */
+	.byte	241
+	.byte	214
+	.byte	192
+	.byte	172
+	.byte	156
+	.byte	142
+	.byte	130
+	.byte	119
+	.byte	109
+	.byte	101
+	.byte	93
+	.byte	87
+	.byte	81
+	.byte	75
+	.byte	70
+	.byte	66
+/* positive division constants */
+	.word	31801
+	.word	29966
+	.word	28383
+	.word	26864
+	.word	25583
+	.word	24408
+	.word	23354
+	.word	22344
+	.word	21384
+	.word	20584
+	.word	19752
+	.word	19104
+	.word	18434
+	.word	17738
+	.word	17136
+	.word	16639
diff --git a/src/kernel/linux/v4.14/arch/sh/lib64/strcpy.S b/src/kernel/linux/v4.14/arch/sh/lib64/strcpy.S
new file mode 100644
index 0000000..b61631e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib64/strcpy.S
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Cloned and hacked for uClibc by Paul Mundt, December 2003 */
+/* Modified by SuperH, Inc. September 2003 */
+! Entry: arg0: destination
+!        arg1: source
+! Exit:  result: destination
+!
+! SH5 code Copyright 2002 SuperH Ltd.
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+#define SHHI shlld
+#define SHLO shlrd
+#else
+#define SHHI shlrd
+#define SHLO shlld
+#endif
+
+	.section .text..SHmedia32,"ax"
+	.globl	strcpy
+	.type	strcpy, @function
+	.align 5
+
+strcpy:
+
+	pta/l shortstring,tr1
+	ldlo.q r3,0,r4
+	ptabs r18,tr4
+	shlli r3,3,r7
+	addi r2, 8, r0
+	mcmpeq.b r4,r63,r6
+	SHHI r6,r7,r6
+	bnei/u r6,0,tr1 // shortstring
+	pta/l no_lddst, tr2
+	ori r3,-8,r23
+	sub r2, r23, r0
+	sub r3, r2, r21
+	addi r21, 8, r20
+	ldx.q r0, r21, r5
+	pta/l loop, tr0
+	ori r2,-8,r22
+	mcmpeq.b r5, r63, r6
+	bgt/u r22, r23, tr2 // no_lddst
+
+	// r22 < r23 :  Need to do a load from the destination.
+	// r22 == r23 : Doesn't actually need to load from destination,
+	//              but still can be handled here.
+	ldlo.q r2, 0, r9
+	movi -1, r8
+	SHLO r8, r7, r8
+	mcmv r4, r8, r9
+	stlo.q r2, 0, r9
+	beqi/l r6, 0, tr0 // loop
+
+	add r5, r63, r4
+	addi r0, 8, r0
+	blink tr1, r63 // shortstring
+no_lddst:
+	// r22 > r23: note that for r22 == r23 the sthi.q would clobber
+	//            bytes before the destination region.
+	stlo.q r2, 0, r4
+	SHHI r4, r7, r4
+	sthi.q r0, -1, r4
+	beqi/l r6, 0, tr0 // loop
+
+	add r5, r63, r4
+	addi r0, 8, r0
+shortstring:
+#if __BYTE_ORDER != __LITTLE_ENDIAN
+	pta/l shortstring2,tr1
+	byterev r4,r4
+#endif
+shortstring2:
+	st.b r0,-8,r4
+	andi r4,0xff,r5
+	shlri r4,8,r4
+	addi r0,1,r0
+	bnei/l r5,0,tr1
+	blink tr4,r63 // return
+	
+	.balign 8
+loop:
+	stlo.q r0, 0, r5
+	ldx.q r0, r20, r4
+	addi r0, 16, r0
+	sthi.q r0, -9, r5
+	mcmpeq.b r4, r63, r6
+	bnei/u r6, 0, tr1 // shortstring
+	ldx.q r0, r21, r5
+	stlo.q r0, -8, r4
+	sthi.q r0, -1, r4
+	mcmpeq.b r5, r63, r6
+	beqi/l r6, 0, tr0 // loop
+
+	add r5, r63, r4
+	addi r0, 8, r0
+	blink tr1, r63 // shortstring
+
+	.size	strcpy,.-strcpy
diff --git a/src/kernel/linux/v4.14/arch/sh/lib64/strlen.S b/src/kernel/linux/v4.14/arch/sh/lib64/strlen.S
new file mode 100644
index 0000000..c00b972
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib64/strlen.S
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Simplistic strlen() implementation for SHmedia.
+ *
+ * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
+ */
+
+	.section .text..SHmedia32,"ax"
+	.globl	strlen
+	.type	strlen,@function
+
+	.balign 16
+strlen:
+	ptabs	r18, tr4
+
+	/*
+	 * Note: We could easily deal with the NULL case here with a simple
+	 * sanity check, though it seems that the behavior we want is to fault
+	 * in the event that r2 == NULL, so we don't bother.
+	 */
+/*	beqi    r2, 0, tr4 */	! Sanity check
+
+	movi	-1, r0
+	pta/l	loop, tr0
+loop:
+	ld.b	r2, 0, r1
+	addi	r2, 1, r2
+	addi	r0, 1, r0
+	bnei/l	r1, 0, tr0
+
+	or	r0, r63, r2
+	blink	tr4, r63
+
+	.size	strlen,.-strlen
diff --git a/src/kernel/linux/v4.14/arch/sh/lib64/udelay.c b/src/kernel/linux/v4.14/arch/sh/lib64/udelay.c
new file mode 100644
index 0000000..f215b06
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib64/udelay.c
@@ -0,0 +1,49 @@
+/*
+ * arch/sh/lib64/udelay.c
+ *
+ * Delay routines, using a pre-computed "loops_per_jiffy" value.
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/sched.h>
+#include <asm/param.h>
+
+/*
+ * Use only for very small delays (< 1 msec).
+ *
+ * The active part of our cycle counter is only 32-bits wide, and
+ * we're treating the difference between two marks as signed.  On
+ * a 1GHz box, that's about 2 seconds.
+ */
+
+void __delay(unsigned long loops)
+{
+	long long dummy;
+	__asm__ __volatile__("gettr	tr0, %1\n\t"
+			     "pta	$+4, tr0\n\t"
+			     "addi	%0, -1, %0\n\t"
+			     "bne	%0, r63, tr0\n\t"
+			     "ptabs	%1, tr0\n\t":"=r"(loops),
+			     "=r"(dummy)
+			     :"0"(loops));
+}
+
+void __const_udelay(unsigned long xloops)
+{
+	__delay(xloops * (HZ * cpu_data[raw_smp_processor_id()].loops_per_jiffy));
+}
+
+void __udelay(unsigned long usecs)
+{
+	__const_udelay(usecs * 0x000010c6);  /* 2**32 / 1000000 */
+}
+
+void __ndelay(unsigned long nsecs)
+{
+	__const_udelay(nsecs * 0x00000005);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/lib64/udivdi3.S b/src/kernel/linux/v4.14/arch/sh/lib64/udivdi3.S
new file mode 100644
index 0000000..c032cb1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib64/udivdi3.S
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+	.section	.text..SHmedia32,"ax"
+	.align	2
+	.global	__udivdi3
+__udivdi3:
+	shlri r3,1,r4
+	nsb r4,r22
+	shlld r3,r22,r6
+	shlri r6,49,r5
+	movi 0xffffffffffffbaf1,r21 /* .l shift count 17.  */
+	sub r21,r5,r1
+	mmulfx.w r1,r1,r4
+	mshflo.w r1,r63,r1
+	sub r63,r22,r20 // r63 == 64 % 64
+	mmulfx.w r5,r4,r4
+	pta large_divisor,tr0
+	addi r20,32,r9
+	msub.w r1,r4,r1
+	madd.w r1,r1,r1
+	mmulfx.w r1,r1,r4
+	shlri r6,32,r7
+	bgt/u r9,r63,tr0 // large_divisor
+	mmulfx.w r5,r4,r4
+	shlri r2,32+14,r19
+	addi r22,-31,r0
+	msub.w r1,r4,r1
+
+	mulu.l r1,r7,r4
+	addi r1,-3,r5
+	mulu.l r5,r19,r5
+	sub r63,r4,r4 // Negate to make sure r1 ends up <= 1/r2
+	shlri r4,2,r4 /* chop off leading %0000000000000000 001.00000000000 - or, as
+	                 the case may be, %0000000000000000 000.11111111111, still */
+	muls.l r1,r4,r4 /* leaving at least one sign bit.  */
+	mulu.l r5,r3,r8
+	mshalds.l r1,r21,r1
+	shari r4,26,r4
+	shlld r8,r0,r8
+	add r1,r4,r1 // 31 bit unsigned reciprocal now in r1 (msb equiv. 0.5)
+	sub r2,r8,r2
+	/* Can do second step of 64 : 32 div now, using r1 and the rest in r2.  */
+
+	shlri r2,22,r21
+	mulu.l r21,r1,r21
+	shlld r5,r0,r8
+	addi r20,30-22,r0
+	shlrd r21,r0,r21
+	mulu.l r21,r3,r5
+	add r8,r21,r8
+	mcmpgt.l r21,r63,r21 // See Note 1
+	addi r20,30,r0
+	mshfhi.l r63,r21,r21
+	sub r2,r5,r2
+	andc r2,r21,r2
+
+	/* small divisor: need a third divide step */
+	mulu.l r2,r1,r7
+	ptabs r18,tr0
+	addi r2,1,r2
+	shlrd r7,r0,r7
+	mulu.l r7,r3,r5
+	add r8,r7,r8
+	sub r2,r3,r2
+	cmpgt r2,r5,r5
+	add r8,r5,r2
+	/* could test r3 here to check for divide by zero.  */
+	blink tr0,r63
+
+large_divisor:
+	mmulfx.w r5,r4,r4
+	shlrd r2,r9,r25
+	shlri r25,32,r8
+	msub.w r1,r4,r1
+
+	mulu.l r1,r7,r4
+	addi r1,-3,r5
+	mulu.l r5,r8,r5
+	sub r63,r4,r4 // Negate to make sure r1 ends up <= 1/r2
+	shlri r4,2,r4 /* chop off leading %0000000000000000 001.00000000000 - or, as
+	                 the case may be, %0000000000000000 000.11111111111, still */
+	muls.l r1,r4,r4 /* leaving at least one sign bit.  */
+	shlri r5,14-1,r8
+	mulu.l r8,r7,r5
+	mshalds.l r1,r21,r1
+	shari r4,26,r4
+	add r1,r4,r1 // 31 bit unsigned reciprocal now in r1 (msb equiv. 0.5)
+	sub r25,r5,r25
+	/* Can do second step of 64 : 32 div now, using r1 and the rest in r25.  */
+
+	shlri r25,22,r21
+	mulu.l r21,r1,r21
+	pta no_lo_adj,tr0
+	addi r22,32,r0
+	shlri r21,40,r21
+	mulu.l r21,r7,r5
+	add r8,r21,r8
+	shlld r2,r0,r2
+	sub r25,r5,r25
+	bgtu/u r7,r25,tr0 // no_lo_adj
+	addi r8,1,r8
+	sub r25,r7,r25
+no_lo_adj:
+	mextr4 r2,r25,r2
+
+	/* large_divisor: only needs a few adjustments.  */
+	mulu.l r8,r6,r5
+	ptabs r18,tr0
+	/* bubble */
+	cmpgtu r5,r2,r5
+	sub r8,r5,r2
+	blink tr0,r63
+	
+/* Note 1: To shift the result of the second divide stage so that the result
+   always fits into 32 bits, yet we still reduce the rest sufficiently
+   would require a lot of instructions to do the shifts just right.  Using
+   the full 64 bit shift result to multiply with the divisor would require
+   four extra instructions for the upper 32 bits (shift / mulu / shift / sub).
+   Fortunately, if the upper 32 bits of the shift result are nonzero, we
+   know that the rest after taking this partial result into account will
+   fit into 32 bits.  So we just clear the upper 32 bits of the rest if the
+   upper 32 bits of the partial result are nonzero.  */
diff --git a/src/kernel/linux/v4.14/arch/sh/lib64/udivsi3.S b/src/kernel/linux/v4.14/arch/sh/lib64/udivsi3.S
new file mode 100644
index 0000000..e4788fb
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/lib64/udivsi3.S
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+	.global	__udivsi3
+	.section	.text..SHmedia32,"ax"
+	.align	2
+
+/*
+   inputs: r4,r5
+   clobbered: r18,r19,r20,r21,r22,r25,tr0
+   result in r0.
+ */
+__udivsi3:
+	addz.l r5,r63,r22
+	nsb r22,r0
+	shlld r22,r0,r25
+	shlri r25,48,r25
+	movi 0xffffffffffffbb0c,r20 /* shift count eqiv 76 */
+	sub r20,r25,r21
+	mmulfx.w r21,r21,r19
+	mshflo.w r21,r63,r21
+	ptabs r18,tr0
+	mmulfx.w r25,r19,r19
+	sub r20,r0,r0
+	/* bubble */
+	msub.w r21,r19,r19
+
+	/*
+	 * It would be nice for scheduling to do this add to r21 before
+	 * the msub.w, but we need a different value for r19 to keep
+	 * errors under control.
+	 */
+	addi r19,-2,r21
+	mulu.l r4,r21,r18
+	mmulfx.w r19,r19,r19
+	shlli r21,15,r21
+	shlrd r18,r0,r18
+	mulu.l r18,r22,r20
+	mmacnfx.wl r25,r19,r21
+	/* bubble */
+	sub r4,r20,r25
+
+	mulu.l r25,r21,r19
+	addi r0,14,r0
+	/* bubble */
+	shlrd r19,r0,r19
+	mulu.l r19,r22,r20
+	add r18,r19,r18
+	/* bubble */
+	sub.l r25,r20,r25
+
+	mulu.l r25,r21,r19
+	addz.l r25,r63,r25
+	sub r25,r22,r25
+	shlrd r19,r0,r19
+	mulu.l r19,r22,r20
+	addi r25,1,r25
+	add r18,r19,r18
+
+	cmpgt r25,r20,r25
+	add.l r18,r25,r0
+	blink tr0,r63
diff --git a/src/kernel/linux/v4.14/arch/sh/math-emu/Makefile b/src/kernel/linux/v4.14/arch/sh/math-emu/Makefile
new file mode 100644
index 0000000..638b342
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/math-emu/Makefile
@@ -0,0 +1 @@
+obj-y	:= math.o
diff --git a/src/kernel/linux/v4.14/arch/sh/math-emu/math.c b/src/kernel/linux/v4.14/arch/sh/math-emu/math.c
new file mode 100644
index 0000000..c86f436
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/math-emu/math.c
@@ -0,0 +1,613 @@
+/*
+ * arch/sh/math-emu/math.c
+ *
+ * Copyright (C) 2006 Takashi YOSHII <takasi-y@ops.dti.ne.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/sched/signal.h>
+#include <linux/signal.h>
+#include <linux/perf_event.h>
+
+#include <linux/uaccess.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+#include "sfp-util.h"
+#include <math-emu/soft-fp.h>
+#include <math-emu/single.h>
+#include <math-emu/double.h>
+
+#define	FPUL		(fregs->fpul)
+#define FPSCR		(fregs->fpscr)
+#define FPSCR_RM	(FPSCR&3)
+#define FPSCR_DN	((FPSCR>>18)&1)
+#define FPSCR_PR	((FPSCR>>19)&1)
+#define FPSCR_SZ	((FPSCR>>20)&1)
+#define FPSCR_FR	((FPSCR>>21)&1)
+#define FPSCR_MASK	0x003fffffUL
+
+#define BANK(n)	(n^(FPSCR_FR?16:0))
+#define FR	((unsigned long*)(fregs->fp_regs))
+#define FR0	(FR[BANK(0)])
+#define FRn	(FR[BANK(n)])
+#define FRm	(FR[BANK(m)])
+#define DR	((unsigned long long*)(fregs->fp_regs))
+#define DRn	(DR[BANK(n)/2])
+#define DRm	(DR[BANK(m)/2])
+
+#define XREG(n)	(n^16)
+#define XFn	(FR[BANK(XREG(n))])
+#define XFm	(FR[BANK(XREG(m))])
+#define XDn	(DR[BANK(XREG(n))/2])
+#define XDm	(DR[BANK(XREG(m))/2])
+
+#define R0	(regs->regs[0])
+#define Rn	(regs->regs[n])
+#define Rm	(regs->regs[m])
+
+#define WRITE(d,a)	({if(put_user(d, (typeof (d)*)a)) return -EFAULT;})
+#define READ(d,a)	({if(get_user(d, (typeof (d)*)a)) return -EFAULT;})
+
+#define PACK_S(r,f)	FP_PACK_SP(&r,f)
+#define UNPACK_S(f,r)	FP_UNPACK_SP(f,&r)
+#define PACK_D(r,f) \
+	{u32 t[2]; FP_PACK_DP(t,f); ((u32*)&r)[0]=t[1]; ((u32*)&r)[1]=t[0];}
+#define UNPACK_D(f,r) \
+	{u32 t[2]; t[0]=((u32*)&r)[1]; t[1]=((u32*)&r)[0]; FP_UNPACK_DP(f,t);}
+
+// 2 args instructions.
+#define BOTH_PRmn(op,x) \
+	FP_DECL_EX; if(FPSCR_PR) op(D,x,DRm,DRn); else op(S,x,FRm,FRn);
+
+#define CMP_X(SZ,R,M,N) do{ \
+	FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); \
+	UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
+	FP_CMP_##SZ(R, Fn, Fm, 2); }while(0)
+#define EQ_X(SZ,R,M,N) do{ \
+	FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); \
+	UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
+	FP_CMP_EQ_##SZ(R, Fn, Fm); }while(0)
+#define CMP(OP) ({ int r; BOTH_PRmn(OP##_X,r); r; })
+
+static int
+fcmp_gt(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+	if (CMP(CMP) > 0)
+		regs->sr |= 1;
+	else
+		regs->sr &= ~1;
+
+	return 0;
+}
+
+static int
+fcmp_eq(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+	if (CMP(CMP /*EQ*/) == 0)
+		regs->sr |= 1;
+	else
+		regs->sr &= ~1;
+	return 0;
+}
+
+#define ARITH_X(SZ,OP,M,N) do{ \
+	FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); FP_DECL_##SZ(Fr); \
+	UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
+	FP_##OP##_##SZ(Fr, Fn, Fm); \
+	PACK_##SZ(N, Fr); }while(0)
+
+static int
+fadd(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+	BOTH_PRmn(ARITH_X, ADD);
+	return 0;
+}
+
+static int
+fsub(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+	BOTH_PRmn(ARITH_X, SUB);
+	return 0;
+}
+
+static int
+fmul(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+	BOTH_PRmn(ARITH_X, MUL);
+	return 0;
+}
+
+static int
+fdiv(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+	BOTH_PRmn(ARITH_X, DIV);
+	return 0;
+}
+
+static int
+fmac(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+	FP_DECL_EX;
+	FP_DECL_S(Fr);
+	FP_DECL_S(Ft);
+	FP_DECL_S(F0);
+	FP_DECL_S(Fm);
+	FP_DECL_S(Fn);
+	UNPACK_S(F0, FR0);
+	UNPACK_S(Fm, FRm);
+	UNPACK_S(Fn, FRn);
+	FP_MUL_S(Ft, Fm, F0);
+	FP_ADD_S(Fr, Fn, Ft);
+	PACK_S(FRn, Fr);
+	return 0;
+}
+
+// to process fmov's extension (odd n for DR access XD).
+#define FMOV_EXT(x) if(x&1) x+=16-1
+
+static int
+fmov_idx_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+	     int n)
+{
+	if (FPSCR_SZ) {
+		FMOV_EXT(n);
+		READ(FRn, Rm + R0 + 4);
+		n++;
+		READ(FRn, Rm + R0);
+	} else {
+		READ(FRn, Rm + R0);
+	}
+
+	return 0;
+}
+
+static int
+fmov_mem_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+	     int n)
+{
+	if (FPSCR_SZ) {
+		FMOV_EXT(n);
+		READ(FRn, Rm + 4);
+		n++;
+		READ(FRn, Rm);
+	} else {
+		READ(FRn, Rm);
+	}
+
+	return 0;
+}
+
+static int
+fmov_inc_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+	     int n)
+{
+	if (FPSCR_SZ) {
+		FMOV_EXT(n);
+		READ(FRn, Rm + 4);
+		n++;
+		READ(FRn, Rm);
+		Rm += 8;
+	} else {
+		READ(FRn, Rm);
+		Rm += 4;
+	}
+
+	return 0;
+}
+
+static int
+fmov_reg_idx(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+	     int n)
+{
+	if (FPSCR_SZ) {
+		FMOV_EXT(m);
+		WRITE(FRm, Rn + R0 + 4);
+		m++;
+		WRITE(FRm, Rn + R0);
+	} else {
+		WRITE(FRm, Rn + R0);
+	}
+
+	return 0;
+}
+
+static int
+fmov_reg_mem(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+	     int n)
+{
+	if (FPSCR_SZ) {
+		FMOV_EXT(m);
+		WRITE(FRm, Rn + 4);
+		m++;
+		WRITE(FRm, Rn);
+	} else {
+		WRITE(FRm, Rn);
+	}
+
+	return 0;
+}
+
+static int
+fmov_reg_dec(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+	     int n)
+{
+	if (FPSCR_SZ) {
+		FMOV_EXT(m);
+		Rn -= 8;
+		WRITE(FRm, Rn + 4);
+		m++;
+		WRITE(FRm, Rn);
+	} else {
+		Rn -= 4;
+		WRITE(FRm, Rn);
+	}
+
+	return 0;
+}
+
+static int
+fmov_reg_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+	     int n)
+{
+	if (FPSCR_SZ) {
+		FMOV_EXT(m);
+		FMOV_EXT(n);
+		DRn = DRm;
+	} else {
+		FRn = FRm;
+	}
+
+	return 0;
+}
+
+static int
+fnop_mn(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+	return -EINVAL;
+}
+
+// 1 arg instructions.
+#define NOTYETn(i) static int i(struct sh_fpu_soft_struct *fregs, int n) \
+	{ printk( #i " not yet done.\n"); return 0; }
+
+NOTYETn(ftrv)
+NOTYETn(fsqrt)
+NOTYETn(fipr)
+NOTYETn(fsca)
+NOTYETn(fsrra)
+
+#define EMU_FLOAT_X(SZ,N) do { \
+	FP_DECL_##SZ(Fn); \
+	FP_FROM_INT_##SZ(Fn, FPUL, 32, int); \
+	PACK_##SZ(N, Fn); }while(0)
+static int ffloat(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FP_DECL_EX;
+
+	if (FPSCR_PR)
+		EMU_FLOAT_X(D, DRn);
+	else
+		EMU_FLOAT_X(S, FRn);
+
+	return 0;
+}
+
+#define EMU_FTRC_X(SZ,N) do { \
+	FP_DECL_##SZ(Fn); \
+	UNPACK_##SZ(Fn, N); \
+	FP_TO_INT_##SZ(FPUL, Fn, 32, 1); }while(0)
+static int ftrc(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FP_DECL_EX;
+
+	if (FPSCR_PR)
+		EMU_FTRC_X(D, DRn);
+	else
+		EMU_FTRC_X(S, FRn);
+
+	return 0;
+}
+
+static int fcnvsd(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FP_DECL_EX;
+	FP_DECL_S(Fn);
+	FP_DECL_D(Fr);
+	UNPACK_S(Fn, FPUL);
+	FP_CONV(D, S, 2, 1, Fr, Fn);
+	PACK_D(DRn, Fr);
+	return 0;
+}
+
+static int fcnvds(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FP_DECL_EX;
+	FP_DECL_D(Fn);
+	FP_DECL_S(Fr);
+	UNPACK_D(Fn, DRn);
+	FP_CONV(S, D, 1, 2, Fr, Fn);
+	PACK_S(FPUL, Fr);
+	return 0;
+}
+
+static int fxchg(struct sh_fpu_soft_struct *fregs, int flag)
+{
+	FPSCR ^= flag;
+	return 0;
+}
+
+static int fsts(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FRn = FPUL;
+	return 0;
+}
+
+static int flds(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FPUL = FRn;
+	return 0;
+}
+
+static int fneg(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FRn ^= (1 << (_FP_W_TYPE_SIZE - 1));
+	return 0;
+}
+
+static int fabs(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FRn &= ~(1 << (_FP_W_TYPE_SIZE - 1));
+	return 0;
+}
+
+static int fld0(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FRn = 0;
+	return 0;
+}
+
+static int fld1(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FRn = (_FP_EXPBIAS_S << (_FP_FRACBITS_S - 1));
+	return 0;
+}
+
+static int fnop_n(struct sh_fpu_soft_struct *fregs, int n)
+{
+	return -EINVAL;
+}
+
+/// Instruction decoders.
+
+static int id_fxfd(struct sh_fpu_soft_struct *, int);
+static int id_fnxd(struct sh_fpu_soft_struct *, struct pt_regs *, int, int);
+
+static int (*fnxd[])(struct sh_fpu_soft_struct *, int) = {
+	fsts, flds, ffloat, ftrc, fneg, fabs, fsqrt, fsrra,
+	fld0, fld1, fcnvsd, fcnvds, fnop_n, fnop_n, fipr, id_fxfd
+};
+
+static int (*fnmx[])(struct sh_fpu_soft_struct *, struct pt_regs *, int, int) = {
+	fadd, fsub, fmul, fdiv, fcmp_eq, fcmp_gt, fmov_idx_reg, fmov_reg_idx,
+	fmov_mem_reg, fmov_inc_reg, fmov_reg_mem, fmov_reg_dec,
+	fmov_reg_reg, id_fnxd, fmac, fnop_mn};
+
+static int id_fxfd(struct sh_fpu_soft_struct *fregs, int x)
+{
+	const int flag[] = { FPSCR_SZ, FPSCR_PR, FPSCR_FR, 0 };
+	switch (x & 3) {
+	case 3:
+		fxchg(fregs, flag[x >> 2]);
+		break;
+	case 1:
+		ftrv(fregs, x - 1);
+		break;
+	default:
+		fsca(fregs, x);
+	}
+	return 0;
+}
+
+static int
+id_fnxd(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int x, int n)
+{
+	return (fnxd[x])(fregs, n);
+}
+
+static int
+id_fnmx(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, u16 code)
+{
+	int n = (code >> 8) & 0xf, m = (code >> 4) & 0xf, x = code & 0xf;
+	return (fnmx[x])(fregs, regs, m, n);
+}
+
+static int
+id_sys(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, u16 code)
+{
+	int n = ((code >> 8) & 0xf);
+	unsigned long *reg = (code & 0x0010) ? &FPUL : &FPSCR;
+
+	switch (code & 0xf0ff) {
+	case 0x005a:
+	case 0x006a:
+		Rn = *reg;
+		break;
+	case 0x405a:
+	case 0x406a:
+		*reg = Rn;
+		break;
+	case 0x4052:
+	case 0x4062:
+		Rn -= 4;
+		WRITE(*reg, Rn);
+		break;
+	case 0x4056:
+	case 0x4066:
+		READ(*reg, Rn);
+		Rn += 4;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int fpu_emulate(u16 code, struct sh_fpu_soft_struct *fregs, struct pt_regs *regs)
+{
+	if ((code & 0xf000) == 0xf000)
+		return id_fnmx(fregs, regs, code);
+	else
+		return id_sys(fregs, regs, code);
+}
+
+/**
+ *	denormal_to_double - Given denormalized float number,
+ *	                     store double float
+ *
+ *	@fpu: Pointer to sh_fpu_soft structure
+ *	@n: Index to FP register
+ */
+static void denormal_to_double(struct sh_fpu_soft_struct *fpu, int n)
+{
+	unsigned long du, dl;
+	unsigned long x = fpu->fpul;
+	int exp = 1023 - 126;
+
+	if (x != 0 && (x & 0x7f800000) == 0) {
+		du = (x & 0x80000000);
+		while ((x & 0x00800000) == 0) {
+			x <<= 1;
+			exp--;
+		}
+		x &= 0x007fffff;
+		du |= (exp << 20) | (x >> 3);
+		dl = x << 29;
+
+		fpu->fp_regs[n] = du;
+		fpu->fp_regs[n+1] = dl;
+	}
+}
+
+/**
+ *	ieee_fpe_handler - Handle denormalized number exception
+ *
+ *	@regs: Pointer to register structure
+ *
+ *	Returns 1 when it's handled (should not cause exception).
+ */
+static int ieee_fpe_handler(struct pt_regs *regs)
+{
+	unsigned short insn = *(unsigned short *)regs->pc;
+	unsigned short finsn;
+	unsigned long nextpc;
+	siginfo_t info;
+	int nib[4] = {
+		(insn >> 12) & 0xf,
+		(insn >> 8) & 0xf,
+		(insn >> 4) & 0xf,
+		insn & 0xf};
+
+	if (nib[0] == 0xb ||
+	    (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */
+		regs->pr = regs->pc + 4;
+
+	if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */
+		nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3);
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */
+		if (regs->sr & 1)
+			nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
+		else
+			nextpc = regs->pc + 4;
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */
+		if (regs->sr & 1)
+			nextpc = regs->pc + 4;
+		else
+			nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (nib[0] == 0x4 && nib[3] == 0xb &&
+		 (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */
+		nextpc = regs->regs[nib[1]];
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (nib[0] == 0x0 && nib[3] == 0x3 &&
+		 (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */
+		nextpc = regs->pc + 4 + regs->regs[nib[1]];
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (insn == 0x000b) { /* rts */
+		nextpc = regs->pr;
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else {
+		nextpc = regs->pc + 2;
+		finsn = insn;
+	}
+
+	if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */
+		struct task_struct *tsk = current;
+
+		if ((tsk->thread.xstate->softfpu.fpscr & (1 << 17))) {
+			/* FPU error */
+			denormal_to_double (&tsk->thread.xstate->softfpu,
+					    (finsn >> 8) & 0xf);
+			tsk->thread.xstate->softfpu.fpscr &=
+				~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
+			task_thread_info(tsk)->status |= TS_USEDFPU;
+		} else {
+			info.si_signo = SIGFPE;
+			info.si_errno = 0;
+			info.si_code = FPE_FLTINV;
+			info.si_addr = (void __user *)regs->pc;
+			force_sig_info(SIGFPE, &info, tsk);
+		}
+
+		regs->pc = nextpc;
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * fpu_init - Initialize FPU registers
+ * @fpu: Pointer to software emulated FPU registers.
+ */
+static void fpu_init(struct sh_fpu_soft_struct *fpu)
+{
+	int i;
+
+	fpu->fpscr = FPSCR_INIT;
+	fpu->fpul = 0;
+
+	for (i = 0; i < 16; i++) {
+		fpu->fp_regs[i] = 0;
+		fpu->xfp_regs[i]= 0;
+	}
+}
+
+/**
+ * do_fpu_inst - Handle reserved instructions for FPU emulation
+ * @inst: instruction code.
+ * @regs: registers on stack.
+ */
+int do_fpu_inst(unsigned short inst, struct pt_regs *regs)
+{
+	struct task_struct *tsk = current;
+	struct sh_fpu_soft_struct *fpu = &(tsk->thread.xstate->softfpu);
+
+	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0);
+
+	if (!(task_thread_info(tsk)->status & TS_USEDFPU)) {
+		/* initialize once. */
+		fpu_init(fpu);
+		task_thread_info(tsk)->status |= TS_USEDFPU;
+	}
+
+	return fpu_emulate(inst, fpu, regs);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/math-emu/sfp-util.h b/src/kernel/linux/v4.14/arch/sh/math-emu/sfp-util.h
new file mode 100644
index 0000000..784f541
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/math-emu/sfp-util.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * These are copied from glibc/stdlib/longlong.h
+ */
+
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+  do {                                                                  \
+    UWtype __x;                                                         \
+    __x = (al) + (bl);                                                  \
+    (sh) = (ah) + (bh) + (__x < (al));                                  \
+    (sl) = __x;                                                         \
+  } while (0)
+
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+  do {                                                                  \
+    UWtype __x;                                                         \
+    __x = (al) - (bl);                                                  \
+    (sh) = (ah) - (bh) - (__x > (al));                                  \
+    (sl) = __x;                                                         \
+  } while (0)
+
+#define umul_ppmm(w1, w0, u, v) \
+  __asm__ ("dmulu.l %2,%3\n\tsts    macl,%1\n\tsts  mach,%0"	\
+	: "=r" ((u32)(w1)), "=r" ((u32)(w0))	\
+	:  "r" ((u32)(u)),   "r" ((u32)(v))	\
+	: "macl", "mach")
+
+#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
+#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
+#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
+
+#define udiv_qrnnd(q, r, n1, n0, d) \
+  do {									\
+    UWtype __d1, __d0, __q1, __q0;					\
+    UWtype __r1, __r0, __m;						\
+    __d1 = __ll_highpart (d);						\
+    __d0 = __ll_lowpart (d);						\
+									\
+    __r1 = (n1) % __d1;							\
+    __q1 = (n1) / __d1;							\
+    __m = (UWtype) __q1 * __d0;						\
+    __r1 = __r1 * __ll_B | __ll_highpart (n0);				\
+    if (__r1 < __m)							\
+      {									\
+	__q1--, __r1 += (d);						\
+	if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\
+	  if (__r1 < __m)						\
+	    __q1--, __r1 += (d);					\
+      }									\
+    __r1 -= __m;							\
+									\
+    __r0 = __r1 % __d1;							\
+    __q0 = __r1 / __d1;							\
+    __m = (UWtype) __q0 * __d0;						\
+    __r0 = __r0 * __ll_B | __ll_lowpart (n0);				\
+    if (__r0 < __m)							\
+      {									\
+	__q0--, __r0 += (d);						\
+	if (__r0 >= (d))						\
+	  if (__r0 < __m)						\
+	    __q0--, __r0 += (d);					\
+      }									\
+    __r0 -= __m;							\
+									\
+    (q) = (UWtype) __q1 * __ll_B | __q0;				\
+    (r) = __r0;								\
+  } while (0)
+
+#define abort()	return 0
+
+#define __BYTE_ORDER __LITTLE_ENDIAN
+
+
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/Kconfig b/src/kernel/linux/v4.14/arch/sh/mm/Kconfig
new file mode 100644
index 0000000..50cdd13
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/Kconfig
@@ -0,0 +1,273 @@
+# SPDX-License-Identifier: GPL-2.0
+menu "Memory management options"
+
+config QUICKLIST
+	def_bool y
+
+config MMU
+        bool "Support for memory management hardware"
+	depends on !CPU_SH2
+	default y
+	help
+	  Some SH processors (such as SH-2/SH-2A) lack an MMU. In order to
+	  boot on these systems, this option must not be set.
+
+	  On other systems (such as the SH-3 and 4) where an MMU exists,
+	  turning this off will boot the kernel on these machines with the
+	  MMU implicitly switched off.
+
+config PAGE_OFFSET
+	hex
+	default "0x80000000" if MMU && SUPERH32
+	default "0x20000000" if MMU && SUPERH64
+	default "0x00000000"
+
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order"
+	range 9 64 if PAGE_SIZE_16KB
+	default "9" if PAGE_SIZE_16KB
+	range 7 64 if PAGE_SIZE_64KB
+	default "7" if PAGE_SIZE_64KB
+	range 11 64
+	default "14" if !MMU
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
+	  The page size is not necessarily 4KB. Keep this in mind when
+	  choosing a value for this option.
+
+config MEMORY_START
+	hex "Physical memory start address"
+	default "0x08000000"
+	---help---
+	  Computers built with Hitachi SuperH processors always
+	  map the ROM starting at address zero.  But the processor
+	  does not specify the range that RAM takes.
+
+	  The physical memory (RAM) start address will be automatically
+	  set to 08000000. Other platforms, such as the Solution Engine
+	  boards typically map RAM at 0C000000.
+
+	  Tweak this only when porting to a new machine which does not
+	  already have a defconfig. Changing it from the known correct
+	  value on any of the known systems will only lead to disaster.
+
+config MEMORY_SIZE
+	hex "Physical memory size"
+	default "0x04000000"
+	help
+	  This sets the default memory size assumed by your SH kernel. It can
+	  be overridden as normal by the 'mem=' argument on the kernel command
+	  line. If unsure, consult your board specifications or just leave it
+	  as 0x04000000 which was the default value before this became
+	  configurable.
+
+# Physical addressing modes
+
+config 29BIT
+	def_bool !32BIT
+	depends on SUPERH32
+	select UNCACHED_MAPPING
+
+config 32BIT
+	bool
+	default y if CPU_SH5 || !MMU
+
+config PMB
+	bool "Support 32-bit physical addressing through PMB"
+	depends on MMU && CPU_SH4A && !CPU_SH4AL_DSP
+	select 32BIT
+	select UNCACHED_MAPPING
+	help
+	  If you say Y here, physical addressing will be extended to
+	  32-bits through the SH-4A PMB. If this is not set, legacy
+	  29-bit physical addressing will be used.
+
+config X2TLB
+	def_bool y
+	depends on (CPU_SHX2 || CPU_SHX3) && MMU
+
+config VSYSCALL
+	bool "Support vsyscall page"
+	depends on MMU && (CPU_SH3 || CPU_SH4)
+	default y
+	help
+	  This will enable support for the kernel mapping a vDSO page
+	  in process space, and subsequently handing down the entry point
+	  to the libc through the ELF auxiliary vector.
+
+	  From the kernel side this is used for the signal trampoline.
+	  For systems with an MMU that can afford to give up a page,
+	  (the default value) say Y.
+
+config NUMA
+	bool "Non Uniform Memory Access (NUMA) Support"
+	depends on MMU && SYS_SUPPORTS_NUMA
+	select ARCH_WANT_NUMA_VARIABLE_LOCALITY
+	default n
+	help
+	  Some SH systems have many various memories scattered around
+	  the address space, each with varying latencies. This enables
+	  support for these blocks by binding them to nodes and allowing
+	  memory policies to be used for prioritizing and controlling
+	  allocation behaviour.
+
+config NODES_SHIFT
+	int
+	default "3" if CPU_SUBTYPE_SHX3
+	default "1"
+	depends on NEED_MULTIPLE_NODES
+
+config ARCH_FLATMEM_ENABLE
+	def_bool y
+	depends on !NUMA
+
+config ARCH_SPARSEMEM_ENABLE
+	def_bool y
+	select SPARSEMEM_STATIC
+
+config ARCH_SPARSEMEM_DEFAULT
+	def_bool y
+
+config ARCH_SELECT_MEMORY_MODEL
+	def_bool y
+
+config ARCH_ENABLE_MEMORY_HOTPLUG
+	def_bool y
+	depends on SPARSEMEM && MMU
+
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+	def_bool y
+	depends on SPARSEMEM && MMU
+
+config ARCH_MEMORY_PROBE
+	def_bool y
+	depends on MEMORY_HOTPLUG
+
+config IOREMAP_FIXED
+       def_bool y
+       depends on X2TLB || SUPERH64
+
+config UNCACHED_MAPPING
+	bool
+
+config HAVE_SRAM_POOL
+	bool
+	select GENERIC_ALLOCATOR
+
+choice
+	prompt "Kernel page size"
+	default PAGE_SIZE_4KB
+
+config PAGE_SIZE_4KB
+	bool "4kB"
+	help
+	  This is the default page size used by all SuperH CPUs.
+
+config PAGE_SIZE_8KB
+	bool "8kB"
+	depends on !MMU || X2TLB
+	help
+	  This enables 8kB pages as supported by SH-X2 and later MMUs.
+
+config PAGE_SIZE_16KB
+	bool "16kB"
+	depends on !MMU
+	help
+	  This enables 16kB pages on MMU-less SH systems.
+
+config PAGE_SIZE_64KB
+	bool "64kB"
+	depends on !MMU || CPU_SH4 || CPU_SH5
+	help
+	  This enables support for 64kB pages, possible on all SH-4
+	  CPUs and later.
+
+endchoice
+
+choice
+	prompt "HugeTLB page size"
+	depends on HUGETLB_PAGE
+	default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB
+	default HUGETLB_PAGE_SIZE_64K
+
+config HUGETLB_PAGE_SIZE_64K
+	bool "64kB"
+	depends on !PAGE_SIZE_64KB
+
+config HUGETLB_PAGE_SIZE_256K
+	bool "256kB"
+	depends on X2TLB
+
+config HUGETLB_PAGE_SIZE_1MB
+	bool "1MB"
+
+config HUGETLB_PAGE_SIZE_4MB
+	bool "4MB"
+	depends on X2TLB
+
+config HUGETLB_PAGE_SIZE_64MB
+	bool "64MB"
+	depends on X2TLB
+
+config HUGETLB_PAGE_SIZE_512MB
+	bool "512MB"
+	depends on CPU_SH5
+
+endchoice
+
+source "mm/Kconfig"
+
+config SCHED_MC
+	bool "Multi-core scheduler support"
+	depends on SMP
+	default y
+	help
+	  Multi-core scheduler support improves the CPU scheduler's decision
+	  making when dealing with multi-core CPU chips at a cost of slightly
+	  increased overhead in some places. If unsure say N here.
+
+endmenu
+
+menu "Cache configuration"
+
+config SH7705_CACHE_32KB
+	bool "Enable 32KB cache size for SH7705"
+	depends on CPU_SUBTYPE_SH7705
+	default y
+
+choice
+	prompt "Cache mode"
+	default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4 || CPU_SH5
+	default CACHE_WRITETHROUGH if (CPU_SH2 && !CPU_SH2A)
+
+config CACHE_WRITEBACK
+	bool "Write-back"
+
+config CACHE_WRITETHROUGH
+	bool "Write-through"
+	help
+	  Selecting this option will configure the caches in write-through
+	  mode, as opposed to the default write-back configuration.
+
+	  Since there's sill some aliasing issues on SH-4, this option will
+	  unfortunately still require the majority of flushing functions to
+	  be implemented to deal with aliasing.
+
+	  If unsure, say N.
+
+config CACHE_OFF
+	bool "Off"
+
+endchoice
+
+endmenu
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/Makefile b/src/kernel/linux/v4.14/arch/sh/mm/Makefile
new file mode 100644
index 0000000..fbe5e79
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/Makefile
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Linux SuperH-specific parts of the memory manager.
+#
+
+obj-y			:= alignment.o cache.o init.o consistent.o mmap.o
+
+cacheops-$(CONFIG_CPU_J2)		:= cache-j2.o
+cacheops-$(CONFIG_CPU_SUBTYPE_SH7619)	:= cache-sh2.o
+cacheops-$(CONFIG_CPU_SH2A)		:= cache-sh2a.o
+cacheops-$(CONFIG_CPU_SH3)		:= cache-sh3.o
+cacheops-$(CONFIG_CPU_SH4)		:= cache-sh4.o flush-sh4.o
+cacheops-$(CONFIG_CPU_SH5)		:= cache-sh5.o flush-sh4.o
+cacheops-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
+cacheops-$(CONFIG_CPU_SHX3)		+= cache-shx3.o
+
+obj-y			+= $(cacheops-y)
+
+mmu-y			:= nommu.o extable_32.o
+mmu-$(CONFIG_MMU)	:= extable_$(BITS).o fault.o gup.o ioremap.o kmap.o \
+			   pgtable.o tlbex_$(BITS).o tlbflush_$(BITS).o
+
+obj-y			+= $(mmu-y)
+
+debugfs-y			:= asids-debugfs.o
+ifndef CONFIG_CACHE_OFF
+debugfs-$(CONFIG_CPU_SH4)	+= cache-debugfs.o
+endif
+
+ifdef CONFIG_MMU
+debugfs-$(CONFIG_CPU_SH4)	+= tlb-debugfs.o
+tlb-$(CONFIG_CPU_SH3)		:= tlb-sh3.o
+tlb-$(CONFIG_CPU_SH4)		:= tlb-sh4.o tlb-urb.o
+tlb-$(CONFIG_CPU_SH5)		:= tlb-sh5.o
+tlb-$(CONFIG_CPU_HAS_PTEAEX)	:= tlb-pteaex.o tlb-urb.o
+obj-y				+= $(tlb-y)
+endif
+
+obj-$(CONFIG_DEBUG_FS)		+= $(debugfs-y)
+obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
+obj-$(CONFIG_PMB)		+= pmb.o
+obj-$(CONFIG_NUMA)		+= numa.o
+obj-$(CONFIG_IOREMAP_FIXED)	+= ioremap_fixed.o
+obj-$(CONFIG_UNCACHED_MAPPING)	+= uncached.o
+obj-$(CONFIG_HAVE_SRAM_POOL)	+= sram.o
+
+GCOV_PROFILE_pmb.o := n
+
+# Special flags for tlbex_64.o.  This puts restrictions on the number of
+# caller-save registers that the compiler can target when building this file.
+# This is required because the code is called from a context in entry.S where
+# very few registers have been saved in the exception handler (for speed
+# reasons).
+# The caller save registers that have been saved and which can be used are
+# r2,r3,r4,r5 : argument passing
+# r15, r18 : SP and LINK
+# tr0-4 : allow all caller-save TR's.  The compiler seems to be able to make
+#         use of them, so it's probably beneficial to performance to save them
+#         and have them available for it.
+#
+# The resources not listed below are callee save, i.e. the compiler is free to
+# use any of them and will spill them to the stack itself.
+
+CFLAGS_tlbex_64.o += -ffixed-r7 \
+	-ffixed-r8 -ffixed-r9 -ffixed-r10 -ffixed-r11 -ffixed-r12 \
+	-ffixed-r13 -ffixed-r14 -ffixed-r16 -ffixed-r17 -ffixed-r19 \
+	-ffixed-r20 -ffixed-r21 -ffixed-r22 -ffixed-r23 \
+	-ffixed-r24 -ffixed-r25 -ffixed-r26 -ffixed-r27 \
+	-ffixed-r36 -ffixed-r37 -ffixed-r38 -ffixed-r39 -ffixed-r40 \
+	-ffixed-r41 -ffixed-r42 -ffixed-r43  \
+	-ffixed-r60 -ffixed-r61 -ffixed-r62 \
+	-fomit-frame-pointer
+
+ccflags-y := -Werror
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/alignment.c b/src/kernel/linux/v4.14/arch/sh/mm/alignment.c
new file mode 100644
index 0000000..ec2b253
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/alignment.c
@@ -0,0 +1,190 @@
+/*
+ * Alignment access counters and corresponding user-space interfaces.
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Copyright (C) 2009 - 2010 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/seq_file.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+#include <linux/ratelimit.h>
+#include <asm/alignment.h>
+#include <asm/processor.h>
+
+static unsigned long se_user;
+static unsigned long se_sys;
+static unsigned long se_half;
+static unsigned long se_word;
+static unsigned long se_dword;
+static unsigned long se_multi;
+/* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not
+   valid! */
+static int se_usermode = UM_WARN | UM_FIXUP;
+/* 0: no warning 1: print a warning message, disabled by default */
+static int se_kernmode_warn;
+
+core_param(alignment, se_usermode, int, 0600);
+
+void inc_unaligned_byte_access(void)
+{
+	se_half++;
+}
+
+void inc_unaligned_word_access(void)
+{
+	se_word++;
+}
+
+void inc_unaligned_dword_access(void)
+{
+	se_dword++;
+}
+
+void inc_unaligned_multi_access(void)
+{
+	se_multi++;
+}
+
+void inc_unaligned_user_access(void)
+{
+	se_user++;
+}
+
+void inc_unaligned_kernel_access(void)
+{
+	se_sys++;
+}
+
+/*
+ * This defaults to the global policy which can be set from the command
+ * line, while processes can overload their preferences via prctl().
+ */
+unsigned int unaligned_user_action(void)
+{
+	unsigned int action = se_usermode;
+
+	if (current->thread.flags & SH_THREAD_UAC_SIGBUS) {
+		action &= ~UM_FIXUP;
+		action |= UM_SIGNAL;
+	}
+
+	if (current->thread.flags & SH_THREAD_UAC_NOPRINT)
+		action &= ~UM_WARN;
+
+	return action;
+}
+
+int get_unalign_ctl(struct task_struct *tsk, unsigned long addr)
+{
+	return put_user(tsk->thread.flags & SH_THREAD_UAC_MASK,
+			(unsigned int __user *)addr);
+}
+
+int set_unalign_ctl(struct task_struct *tsk, unsigned int val)
+{
+	tsk->thread.flags = (tsk->thread.flags & ~SH_THREAD_UAC_MASK) |
+			    (val & SH_THREAD_UAC_MASK);
+	return 0;
+}
+
+void unaligned_fixups_notify(struct task_struct *tsk, insn_size_t insn,
+			     struct pt_regs *regs)
+{
+	if (user_mode(regs) && (se_usermode & UM_WARN))
+		pr_notice_ratelimited("Fixing up unaligned userspace access "
+			  "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+			  tsk->comm, task_pid_nr(tsk),
+			  (void *)instruction_pointer(regs), insn);
+	else if (se_kernmode_warn)
+		pr_notice_ratelimited("Fixing up unaligned kernel access "
+			  "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+			  tsk->comm, task_pid_nr(tsk),
+			  (void *)instruction_pointer(regs), insn);
+}
+
+static const char *se_usermode_action[] = {
+	"ignored",
+	"warn",
+	"fixup",
+	"fixup+warn",
+	"signal",
+	"signal+warn"
+};
+
+static int alignment_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "User:\t\t%lu\n", se_user);
+	seq_printf(m, "System:\t\t%lu\n", se_sys);
+	seq_printf(m, "Half:\t\t%lu\n", se_half);
+	seq_printf(m, "Word:\t\t%lu\n", se_word);
+	seq_printf(m, "DWord:\t\t%lu\n", se_dword);
+	seq_printf(m, "Multi:\t\t%lu\n", se_multi);
+	seq_printf(m, "User faults:\t%i (%s)\n", se_usermode,
+			se_usermode_action[se_usermode]);
+	seq_printf(m, "Kernel faults:\t%i (fixup%s)\n", se_kernmode_warn,
+			se_kernmode_warn ? "+warn" : "");
+	return 0;
+}
+
+static int alignment_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, alignment_proc_show, NULL);
+}
+
+static ssize_t alignment_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *pos)
+{
+	int *data = PDE_DATA(file_inode(file));
+	char mode;
+
+	if (count > 0) {
+		if (get_user(mode, buffer))
+			return -EFAULT;
+		if (mode >= '0' && mode <= '5')
+			*data = mode - '0';
+	}
+	return count;
+}
+
+static const struct file_operations alignment_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= alignment_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= alignment_proc_write,
+};
+
+/*
+ * This needs to be done after sysctl_init, otherwise sys/ will be
+ * overwritten.  Actually, this shouldn't be in sys/ at all since
+ * it isn't a sysctl, and it doesn't contain sysctl information.
+ * We now locate it in /proc/cpu/alignment instead.
+ */
+static int __init alignment_init(void)
+{
+	struct proc_dir_entry *dir, *res;
+
+	dir = proc_mkdir("cpu", NULL);
+	if (!dir)
+		return -ENOMEM;
+
+	res = proc_create_data("alignment", S_IWUSR | S_IRUGO, dir,
+			       &alignment_proc_fops, &se_usermode);
+	if (!res)
+		return -ENOMEM;
+
+        res = proc_create_data("kernel_alignment", S_IWUSR | S_IRUGO, dir,
+			       &alignment_proc_fops, &se_kernmode_warn);
+        if (!res)
+                return -ENOMEM;
+
+	return 0;
+}
+fs_initcall(alignment_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/asids-debugfs.c b/src/kernel/linux/v4.14/arch/sh/mm/asids-debugfs.c
new file mode 100644
index 0000000..e5539e0
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/asids-debugfs.c
@@ -0,0 +1,75 @@
+/*
+ * debugfs ops for process ASIDs
+ *
+ *  Copyright (C) 2000, 2001  Paolo Alberelli
+ *  Copyright (C) 2003 - 2008  Paul Mundt
+ *  Copyright (C) 2003, 2004  Richard Curnow
+ *
+ * Provides a debugfs file that lists out the ASIDs currently associated
+ * with the processes.
+ *
+ * In the SH-5 case, if the DM.PC register is examined through the debug
+ * link, this shows ASID + PC. To make use of this, the PID->ASID
+ * relationship needs to be known. This is primarily for debugging.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/spinlock.h>
+#include <linux/sched/signal.h>
+#include <linux/sched/task.h>
+
+#include <asm/processor.h>
+#include <asm/mmu_context.h>
+
+static int asids_seq_show(struct seq_file *file, void *iter)
+{
+	struct task_struct *p;
+
+	read_lock(&tasklist_lock);
+
+	for_each_process(p) {
+		int pid = p->pid;
+
+		if (unlikely(!pid))
+			continue;
+
+		if (p->mm)
+			seq_printf(file, "%5d : %04lx\n", pid,
+				   cpu_asid(smp_processor_id(), p->mm));
+	}
+
+	read_unlock(&tasklist_lock);
+
+	return 0;
+}
+
+static int asids_debugfs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, asids_seq_show, inode->i_private);
+}
+
+static const struct file_operations asids_debugfs_fops = {
+	.owner		= THIS_MODULE,
+	.open		= asids_debugfs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init asids_debugfs_init(void)
+{
+	struct dentry *asids_dentry;
+
+	asids_dentry = debugfs_create_file("asids", S_IRUSR, arch_debugfs_dir,
+					   NULL, &asids_debugfs_fops);
+	if (!asids_dentry)
+		return -ENOMEM;
+
+	return PTR_ERR_OR_ZERO(asids_dentry);
+}
+device_initcall(asids_debugfs_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/cache-debugfs.c b/src/kernel/linux/v4.14/arch/sh/mm/cache-debugfs.c
new file mode 100644
index 0000000..4eb9d43
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/cache-debugfs.c
@@ -0,0 +1,132 @@
+/*
+ * debugfs ops for the L1 cache
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <asm/processor.h>
+#include <linux/uaccess.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+
+enum cache_type {
+	CACHE_TYPE_ICACHE,
+	CACHE_TYPE_DCACHE,
+	CACHE_TYPE_UNIFIED,
+};
+
+static int cache_seq_show(struct seq_file *file, void *iter)
+{
+	unsigned int cache_type = (unsigned int)file->private;
+	struct cache_info *cache;
+	unsigned int waysize, way;
+	unsigned long ccr;
+	unsigned long addrstart = 0;
+
+	/*
+	 * Go uncached immediately so we don't skew the results any
+	 * more than we already are..
+	 */
+	jump_to_uncached();
+
+	ccr = __raw_readl(SH_CCR);
+	if ((ccr & CCR_CACHE_ENABLE) == 0) {
+		back_to_cached();
+
+		seq_printf(file, "disabled\n");
+		return 0;
+	}
+
+	if (cache_type == CACHE_TYPE_DCACHE) {
+		addrstart = CACHE_OC_ADDRESS_ARRAY;
+		cache = &current_cpu_data.dcache;
+	} else {
+		addrstart = CACHE_IC_ADDRESS_ARRAY;
+		cache = &current_cpu_data.icache;
+	}
+
+	waysize = cache->sets;
+
+	/*
+	 * If the OC is already in RAM mode, we only have
+	 * half of the entries to consider..
+	 */
+	if ((ccr & CCR_CACHE_ORA) && cache_type == CACHE_TYPE_DCACHE)
+		waysize >>= 1;
+
+	waysize <<= cache->entry_shift;
+
+	for (way = 0; way < cache->ways; way++) {
+		unsigned long addr;
+		unsigned int line;
+
+		seq_printf(file, "-----------------------------------------\n");
+		seq_printf(file, "Way %d\n", way);
+		seq_printf(file, "-----------------------------------------\n");
+
+		for (addr = addrstart, line = 0;
+		     addr < addrstart + waysize;
+		     addr += cache->linesz, line++) {
+			unsigned long data = __raw_readl(addr);
+
+			/* Check the V bit, ignore invalid cachelines */
+			if ((data & 1) == 0)
+				continue;
+
+			/* U: Dirty, cache tag is 10 bits up */
+			seq_printf(file, "%3d: %c 0x%lx\n",
+				   line, data & 2 ? 'U' : ' ',
+				   data & 0x1ffffc00);
+		}
+
+		addrstart += cache->way_incr;
+	}
+
+	back_to_cached();
+
+	return 0;
+}
+
+static int cache_debugfs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cache_seq_show, inode->i_private);
+}
+
+static const struct file_operations cache_debugfs_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cache_debugfs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init cache_debugfs_init(void)
+{
+	struct dentry *dcache_dentry, *icache_dentry;
+
+	dcache_dentry = debugfs_create_file("dcache", S_IRUSR, arch_debugfs_dir,
+					    (unsigned int *)CACHE_TYPE_DCACHE,
+					    &cache_debugfs_fops);
+	if (!dcache_dentry)
+		return -ENOMEM;
+
+	icache_dentry = debugfs_create_file("icache", S_IRUSR, arch_debugfs_dir,
+					    (unsigned int *)CACHE_TYPE_ICACHE,
+					    &cache_debugfs_fops);
+	if (!icache_dentry) {
+		debugfs_remove(dcache_dentry);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+module_init(cache_debugfs_init);
+
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/cache-j2.c b/src/kernel/linux/v4.14/arch/sh/mm/cache-j2.c
new file mode 100644
index 0000000..391698b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/cache-j2.c
@@ -0,0 +1,65 @@
+/*
+ * arch/sh/mm/cache-j2.c
+ *
+ * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/cpumask.h>
+
+#include <asm/cache.h>
+#include <asm/addrspace.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+#define ICACHE_ENABLE	0x1
+#define DCACHE_ENABLE	0x2
+#define CACHE_ENABLE	(ICACHE_ENABLE | DCACHE_ENABLE)
+#define ICACHE_FLUSH	0x100
+#define DCACHE_FLUSH	0x200
+#define CACHE_FLUSH	(ICACHE_FLUSH | DCACHE_FLUSH)
+
+u32 __iomem *j2_ccr_base;
+
+static void j2_flush_icache(void *args)
+{
+	unsigned cpu;
+	for_each_possible_cpu(cpu)
+		__raw_writel(CACHE_ENABLE | ICACHE_FLUSH, j2_ccr_base + cpu);
+}
+
+static void j2_flush_dcache(void *args)
+{
+	unsigned cpu;
+	for_each_possible_cpu(cpu)
+		__raw_writel(CACHE_ENABLE | DCACHE_FLUSH, j2_ccr_base + cpu);
+}
+
+static void j2_flush_both(void *args)
+{
+	unsigned cpu;
+	for_each_possible_cpu(cpu)
+		__raw_writel(CACHE_ENABLE | CACHE_FLUSH, j2_ccr_base + cpu);
+}
+
+void __init j2_cache_init(void)
+{
+	if (!j2_ccr_base)
+		return;
+
+	local_flush_cache_all = j2_flush_both;
+	local_flush_cache_mm = j2_flush_both;
+	local_flush_cache_dup_mm = j2_flush_both;
+	local_flush_cache_page = j2_flush_both;
+	local_flush_cache_range = j2_flush_both;
+	local_flush_dcache_page = j2_flush_dcache;
+	local_flush_icache_range = j2_flush_icache;
+	local_flush_icache_page = j2_flush_icache;
+	local_flush_cache_sigtramp = j2_flush_icache;
+
+	pr_info("Initial J2 CCR is %.8x\n", __raw_readl(j2_ccr_base));
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/cache-sh2.c b/src/kernel/linux/v4.14/arch/sh/mm/cache-sh2.c
new file mode 100644
index 0000000..a74259f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/cache-sh2.c
@@ -0,0 +1,91 @@
+/*
+ * arch/sh/mm/cache-sh2.c
+ *
+ * Copyright (C) 2002 Paul Mundt
+ * Copyright (C) 2008 Yoshinori Sato
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/cache.h>
+#include <asm/addrspace.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+static void sh2__flush_wback_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0);
+		int way;
+		for (way = 0; way < 4; way++) {
+			unsigned long data =  __raw_readl(addr | (way << 12));
+			if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
+				data &= ~SH_CACHE_UPDATED;
+				__raw_writel(data, addr | (way << 12));
+			}
+		}
+	}
+}
+
+static void sh2__flush_purge_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES)
+		__raw_writel((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
+}
+
+static void sh2__flush_invalidate_region(void *start, int size)
+{
+#ifdef CONFIG_CACHE_WRITEBACK
+	/*
+	 * SH-2 does not support individual line invalidation, only a
+	 * global invalidate.
+	 */
+	unsigned long ccr;
+	unsigned long flags;
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	ccr = __raw_readl(SH_CCR);
+	ccr |= CCR_CACHE_INVALIDATE;
+	__raw_writel(ccr, SH_CCR);
+
+	back_to_cached();
+	local_irq_restore(flags);
+#else
+	unsigned long v;
+	unsigned long begin, end;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES)
+		__raw_writel((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
+#endif
+}
+
+void __init sh2_cache_init(void)
+{
+	__flush_wback_region		= sh2__flush_wback_region;
+	__flush_purge_region		= sh2__flush_purge_region;
+	__flush_invalidate_region	= sh2__flush_invalidate_region;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/cache-sh2a.c b/src/kernel/linux/v4.14/arch/sh/mm/cache-sh2a.c
new file mode 100644
index 0000000..ee87d08
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/cache-sh2a.c
@@ -0,0 +1,189 @@
+/*
+ * arch/sh/mm/cache-sh2a.c
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/cache.h>
+#include <asm/addrspace.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+/*
+ * The maximum number of pages we support up to when doing ranged dcache
+ * flushing. Anything exceeding this will simply flush the dcache in its
+ * entirety.
+ */
+#define MAX_OCACHE_PAGES	32
+#define MAX_ICACHE_PAGES	32
+
+#ifdef CONFIG_CACHE_WRITEBACK
+static void sh2a_flush_oc_line(unsigned long v, int way)
+{
+	unsigned long addr = (v & 0x000007f0) | (way << 11);
+	unsigned long data;
+
+	data = __raw_readl(CACHE_OC_ADDRESS_ARRAY | addr);
+	if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
+		data &= ~SH_CACHE_UPDATED;
+		__raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr);
+	}
+}
+#endif
+
+static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v)
+{
+	/* Set associative bit to hit all ways */
+	unsigned long addr = (v & 0x000007f0) | SH_CACHE_ASSOC;
+	__raw_writel((addr & CACHE_PHYSADDR_MASK), cache_addr | addr);
+}
+
+/*
+ * Write back the dirty D-caches, but not invalidate them.
+ */
+static void sh2a__flush_wback_region(void *start, int size)
+{
+#ifdef CONFIG_CACHE_WRITEBACK
+	unsigned long v;
+	unsigned long begin, end;
+	unsigned long flags;
+	int nr_ways;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	nr_ways = current_cpu_data.dcache.ways;
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	/* If there are too many pages then flush the entire cache */
+	if (((end - begin) >> PAGE_SHIFT) >= MAX_OCACHE_PAGES) {
+		begin = CACHE_OC_ADDRESS_ARRAY;
+		end = begin + (nr_ways * current_cpu_data.dcache.way_size);
+
+		for (v = begin; v < end; v += L1_CACHE_BYTES) {
+			unsigned long data = __raw_readl(v);
+			if (data & SH_CACHE_UPDATED)
+				__raw_writel(data & ~SH_CACHE_UPDATED, v);
+		}
+	} else {
+		int way;
+		for (way = 0; way < nr_ways; way++) {
+			for (v = begin; v < end; v += L1_CACHE_BYTES)
+				sh2a_flush_oc_line(v, way);
+		}
+	}
+
+	back_to_cached();
+	local_irq_restore(flags);
+#endif
+}
+
+/*
+ * Write back the dirty D-caches and invalidate them.
+ */
+static void sh2a__flush_purge_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+	unsigned long flags;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+#ifdef CONFIG_CACHE_WRITEBACK
+		int way;
+		int nr_ways = current_cpu_data.dcache.ways;
+		for (way = 0; way < nr_ways; way++)
+			sh2a_flush_oc_line(v, way);
+#endif
+		sh2a_invalidate_line(CACHE_OC_ADDRESS_ARRAY, v);
+	}
+
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+/*
+ * Invalidate the D-caches, but no write back please
+ */
+static void sh2a__flush_invalidate_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+	unsigned long flags;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	/* If there are too many pages then just blow the cache */
+	if (((end - begin) >> PAGE_SHIFT) >= MAX_OCACHE_PAGES) {
+		__raw_writel(__raw_readl(SH_CCR) | CCR_OCACHE_INVALIDATE,
+			     SH_CCR);
+	} else {
+		for (v = begin; v < end; v += L1_CACHE_BYTES)
+			sh2a_invalidate_line(CACHE_OC_ADDRESS_ARRAY, v);
+	}
+
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+/*
+ * Write back the range of D-cache, and purge the I-cache.
+ */
+static void sh2a_flush_icache_range(void *args)
+{
+	struct flusher_data *data = args;
+	unsigned long start, end;
+	unsigned long v;
+	unsigned long flags;
+
+	start = data->addr1 & ~(L1_CACHE_BYTES-1);
+	end = (data->addr2 + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1);
+
+#ifdef CONFIG_CACHE_WRITEBACK
+	sh2a__flush_wback_region((void *)start, end-start);
+#endif
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	/* I-Cache invalidate */
+	/* If there are too many pages then just blow the cache */
+	if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
+		__raw_writel(__raw_readl(SH_CCR) | CCR_ICACHE_INVALIDATE,
+			     SH_CCR);
+	} else {
+		for (v = start; v < end; v += L1_CACHE_BYTES)
+			sh2a_invalidate_line(CACHE_IC_ADDRESS_ARRAY, v);
+	}
+
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+void __init sh2a_cache_init(void)
+{
+	local_flush_icache_range	= sh2a_flush_icache_range;
+
+	__flush_wback_region		= sh2a__flush_wback_region;
+	__flush_purge_region		= sh2a__flush_purge_region;
+	__flush_invalidate_region	= sh2a__flush_invalidate_region;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/cache-sh3.c b/src/kernel/linux/v4.14/arch/sh/mm/cache-sh3.c
new file mode 100644
index 0000000..031634f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/cache-sh3.c
@@ -0,0 +1,105 @@
+/*
+ * arch/sh/mm/cache-sh3.c
+ *
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ * Copyright (C) 2002 Paul Mundt
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <linux/init.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/threads.h>
+#include <asm/addrspace.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+/*
+ * Write back the dirty D-caches, but not invalidate them.
+ *
+ * Is this really worth it, or should we just alias this routine
+ * to __flush_purge_region too?
+ *
+ * START: Virtual Address (U0, P1, or P3)
+ * SIZE: Size of the region.
+ */
+
+static void sh3__flush_wback_region(void *start, int size)
+{
+	unsigned long v, j;
+	unsigned long begin, end;
+	unsigned long flags;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		unsigned long addrstart = CACHE_OC_ADDRESS_ARRAY;
+		for (j = 0; j < current_cpu_data.dcache.ways; j++) {
+			unsigned long data, addr, p;
+
+			p = __pa(v);
+			addr = addrstart | (v & current_cpu_data.dcache.entry_mask);
+			local_irq_save(flags);
+			data = __raw_readl(addr);
+
+			if ((data & CACHE_PHYSADDR_MASK) ==
+			    (p & CACHE_PHYSADDR_MASK)) {
+				data &= ~SH_CACHE_UPDATED;
+				__raw_writel(data, addr);
+				local_irq_restore(flags);
+				break;
+			}
+			local_irq_restore(flags);
+			addrstart += current_cpu_data.dcache.way_incr;
+		}
+	}
+}
+
+/*
+ * Write back the dirty D-caches and invalidate them.
+ *
+ * START: Virtual Address (U0, P1, or P3)
+ * SIZE: Size of the region.
+ */
+static void sh3__flush_purge_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		unsigned long data, addr;
+
+		data = (v & 0xfffffc00); /* _Virtual_ address, ~U, ~V */
+		addr = CACHE_OC_ADDRESS_ARRAY |
+			(v & current_cpu_data.dcache.entry_mask) | SH_CACHE_ASSOC;
+		__raw_writel(data, addr);
+	}
+}
+
+void __init sh3_cache_init(void)
+{
+	__flush_wback_region = sh3__flush_wback_region;
+	__flush_purge_region = sh3__flush_purge_region;
+
+	/*
+	 * No write back please
+	 *
+	 * Except I don't think there's any way to avoid the writeback.
+	 * So we just alias it to sh3__flush_purge_region(). dwmw2.
+	 */
+	__flush_invalidate_region = sh3__flush_purge_region;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/cache-sh4.c b/src/kernel/linux/v4.14/arch/sh/mm/cache-sh4.c
new file mode 100644
index 0000000..58aaa4f
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/cache-sh4.c
@@ -0,0 +1,394 @@
+/*
+ * arch/sh/mm/cache-sh4.c
+ *
+ * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
+ * Copyright (C) 2001 - 2009  Paul Mundt
+ * Copyright (C) 2003  Richard Curnow
+ * Copyright (c) 2007 STMicroelectronics (R&D) Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/fs.h>
+#include <linux/highmem.h>
+#include <asm/pgtable.h>
+#include <asm/mmu_context.h>
+#include <asm/cache_insns.h>
+#include <asm/cacheflush.h>
+
+/*
+ * The maximum number of pages we support up to when doing ranged dcache
+ * flushing. Anything exceeding this will simply flush the dcache in its
+ * entirety.
+ */
+#define MAX_ICACHE_PAGES	32
+
+static void __flush_cache_one(unsigned long addr, unsigned long phys,
+			       unsigned long exec_offset);
+
+/*
+ * Write back the range of D-cache, and purge the I-cache.
+ *
+ * Called from kernel/module.c:sys_init_module and routine for a.out format,
+ * signal handler code and kprobes code
+ */
+static void sh4_flush_icache_range(void *args)
+{
+	struct flusher_data *data = args;
+	unsigned long start, end;
+	unsigned long flags, v;
+	int i;
+
+	start = data->addr1;
+	end = data->addr2;
+
+	/* If there are too many pages then just blow away the caches */
+	if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
+		local_flush_cache_all(NULL);
+		return;
+	}
+
+	/*
+	 * Selectively flush d-cache then invalidate the i-cache.
+	 * This is inefficient, so only use this for small ranges.
+	 */
+	start &= ~(L1_CACHE_BYTES-1);
+	end += L1_CACHE_BYTES-1;
+	end &= ~(L1_CACHE_BYTES-1);
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	for (v = start; v < end; v += L1_CACHE_BYTES) {
+		unsigned long icacheaddr;
+		int j, n;
+
+		__ocbwb(v);
+
+		icacheaddr = CACHE_IC_ADDRESS_ARRAY | (v &
+				cpu_data->icache.entry_mask);
+
+		/* Clear i-cache line valid-bit */
+		n = boot_cpu_data.icache.n_aliases;
+		for (i = 0; i < cpu_data->icache.ways; i++) {
+			for (j = 0; j < n; j++)
+				__raw_writel(0, icacheaddr + (j * PAGE_SIZE));
+			icacheaddr += cpu_data->icache.way_incr;
+		}
+	}
+
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+static inline void flush_cache_one(unsigned long start, unsigned long phys)
+{
+	unsigned long flags, exec_offset = 0;
+
+	/*
+	 * All types of SH-4 require PC to be uncached to operate on the I-cache.
+	 * Some types of SH-4 require PC to be uncached to operate on the D-cache.
+	 */
+	if ((boot_cpu_data.flags & CPU_HAS_P2_FLUSH_BUG) ||
+	    (start < CACHE_OC_ADDRESS_ARRAY))
+		exec_offset = cached_to_uncached;
+
+	local_irq_save(flags);
+	__flush_cache_one(start, phys, exec_offset);
+	local_irq_restore(flags);
+}
+
+/*
+ * Write back & invalidate the D-cache of the page.
+ * (To avoid "alias" issues)
+ */
+static void sh4_flush_dcache_page(void *arg)
+{
+	struct page *page = arg;
+	unsigned long addr = (unsigned long)page_address(page);
+#ifndef CONFIG_SMP
+	struct address_space *mapping = page_mapping(page);
+
+	if (mapping && !mapping_mapped(mapping))
+		clear_bit(PG_dcache_clean, &page->flags);
+	else
+#endif
+		flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
+				(addr & shm_align_mask), page_to_phys(page));
+
+	wmb();
+}
+
+/* TODO: Selective icache invalidation through IC address array.. */
+static void flush_icache_all(void)
+{
+	unsigned long flags, ccr;
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	/* Flush I-cache */
+	ccr = __raw_readl(SH_CCR);
+	ccr |= CCR_CACHE_ICI;
+	__raw_writel(ccr, SH_CCR);
+
+	/*
+	 * back_to_cached() will take care of the barrier for us, don't add
+	 * another one!
+	 */
+
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+static void flush_dcache_all(void)
+{
+	unsigned long addr, end_addr, entry_offset;
+
+	end_addr = CACHE_OC_ADDRESS_ARRAY +
+		(current_cpu_data.dcache.sets <<
+		 current_cpu_data.dcache.entry_shift) *
+			current_cpu_data.dcache.ways;
+
+	entry_offset = 1 << current_cpu_data.dcache.entry_shift;
+
+	for (addr = CACHE_OC_ADDRESS_ARRAY; addr < end_addr; ) {
+		__raw_writel(0, addr); addr += entry_offset;
+		__raw_writel(0, addr); addr += entry_offset;
+		__raw_writel(0, addr); addr += entry_offset;
+		__raw_writel(0, addr); addr += entry_offset;
+		__raw_writel(0, addr); addr += entry_offset;
+		__raw_writel(0, addr); addr += entry_offset;
+		__raw_writel(0, addr); addr += entry_offset;
+		__raw_writel(0, addr); addr += entry_offset;
+	}
+}
+
+static void sh4_flush_cache_all(void *unused)
+{
+	flush_dcache_all();
+	flush_icache_all();
+}
+
+/*
+ * Note : (RPC) since the caches are physically tagged, the only point
+ * of flush_cache_mm for SH-4 is to get rid of aliases from the
+ * D-cache.  The assumption elsewhere, e.g. flush_cache_range, is that
+ * lines can stay resident so long as the virtual address they were
+ * accessed with (hence cache set) is in accord with the physical
+ * address (i.e. tag).  It's no different here.
+ *
+ * Caller takes mm->mmap_sem.
+ */
+static void sh4_flush_cache_mm(void *arg)
+{
+	struct mm_struct *mm = arg;
+
+	if (cpu_context(smp_processor_id(), mm) == NO_CONTEXT)
+		return;
+
+	flush_dcache_all();
+}
+
+/*
+ * Write back and invalidate I/D-caches for the page.
+ *
+ * ADDR: Virtual Address (U0 address)
+ * PFN: Physical page number
+ */
+static void sh4_flush_cache_page(void *args)
+{
+	struct flusher_data *data = args;
+	struct vm_area_struct *vma;
+	struct page *page;
+	unsigned long address, pfn, phys;
+	int map_coherent = 0;
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+	void *vaddr;
+
+	vma = data->vma;
+	address = data->addr1 & PAGE_MASK;
+	pfn = data->addr2;
+	phys = pfn << PAGE_SHIFT;
+	page = pfn_to_page(pfn);
+
+	if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
+		return;
+
+	pgd = pgd_offset(vma->vm_mm, address);
+	pud = pud_offset(pgd, address);
+	pmd = pmd_offset(pud, address);
+	pte = pte_offset_kernel(pmd, address);
+
+	/* If the page isn't present, there is nothing to do here. */
+	if (!(pte_val(*pte) & _PAGE_PRESENT))
+		return;
+
+	if ((vma->vm_mm == current->active_mm))
+		vaddr = NULL;
+	else {
+		/*
+		 * Use kmap_coherent or kmap_atomic to do flushes for
+		 * another ASID than the current one.
+		 */
+		map_coherent = (current_cpu_data.dcache.n_aliases &&
+			test_bit(PG_dcache_clean, &page->flags) &&
+			page_mapcount(page));
+		if (map_coherent)
+			vaddr = kmap_coherent(page, address);
+		else
+			vaddr = kmap_atomic(page);
+
+		address = (unsigned long)vaddr;
+	}
+
+	flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
+			(address & shm_align_mask), phys);
+
+	if (vma->vm_flags & VM_EXEC)
+		flush_icache_all();
+
+	if (vaddr) {
+		if (map_coherent)
+			kunmap_coherent(vaddr);
+		else
+			kunmap_atomic(vaddr);
+	}
+}
+
+/*
+ * Write back and invalidate D-caches.
+ *
+ * START, END: Virtual Address (U0 address)
+ *
+ * NOTE: We need to flush the _physical_ page entry.
+ * Flushing the cache lines for U0 only isn't enough.
+ * We need to flush for P1 too, which may contain aliases.
+ */
+static void sh4_flush_cache_range(void *args)
+{
+	struct flusher_data *data = args;
+	struct vm_area_struct *vma;
+	unsigned long start, end;
+
+	vma = data->vma;
+	start = data->addr1;
+	end = data->addr2;
+
+	if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
+		return;
+
+	/*
+	 * If cache is only 4k-per-way, there are never any 'aliases'.  Since
+	 * the cache is physically tagged, the data can just be left in there.
+	 */
+	if (boot_cpu_data.dcache.n_aliases == 0)
+		return;
+
+	flush_dcache_all();
+
+	if (vma->vm_flags & VM_EXEC)
+		flush_icache_all();
+}
+
+/**
+ * __flush_cache_one
+ *
+ * @addr:  address in memory mapped cache array
+ * @phys:  P1 address to flush (has to match tags if addr has 'A' bit
+ *         set i.e. associative write)
+ * @exec_offset: set to 0x20000000 if flush has to be executed from P2
+ *               region else 0x0
+ *
+ * The offset into the cache array implied by 'addr' selects the
+ * 'colour' of the virtual address range that will be flushed.  The
+ * operation (purge/write-back) is selected by the lower 2 bits of
+ * 'phys'.
+ */
+static void __flush_cache_one(unsigned long addr, unsigned long phys,
+			       unsigned long exec_offset)
+{
+	int way_count;
+	unsigned long base_addr = addr;
+	struct cache_info *dcache;
+	unsigned long way_incr;
+	unsigned long a, ea, p;
+	unsigned long temp_pc;
+
+	dcache = &boot_cpu_data.dcache;
+	/* Write this way for better assembly. */
+	way_count = dcache->ways;
+	way_incr = dcache->way_incr;
+
+	/*
+	 * Apply exec_offset (i.e. branch to P2 if required.).
+	 *
+	 * FIXME:
+	 *
+	 *	If I write "=r" for the (temp_pc), it puts this in r6 hence
+	 *	trashing exec_offset before it's been added on - why?  Hence
+	 *	"=&r" as a 'workaround'
+	 */
+	asm volatile("mov.l 1f, %0\n\t"
+		     "add   %1, %0\n\t"
+		     "jmp   @%0\n\t"
+		     "nop\n\t"
+		     ".balign 4\n\t"
+		     "1:  .long 2f\n\t"
+		     "2:\n" : "=&r" (temp_pc) : "r" (exec_offset));
+
+	/*
+	 * We know there will be >=1 iteration, so write as do-while to avoid
+	 * pointless nead-of-loop check for 0 iterations.
+	 */
+	do {
+		ea = base_addr + PAGE_SIZE;
+		a = base_addr;
+		p = phys;
+
+		do {
+			*(volatile unsigned long *)a = p;
+			/*
+			 * Next line: intentionally not p+32, saves an add, p
+			 * will do since only the cache tag bits need to
+			 * match.
+			 */
+			*(volatile unsigned long *)(a+32) = p;
+			a += 64;
+			p += 64;
+		} while (a < ea);
+
+		base_addr += way_incr;
+	} while (--way_count != 0);
+}
+
+extern void __weak sh4__flush_region_init(void);
+
+/*
+ * SH-4 has virtually indexed and physically tagged cache.
+ */
+void __init sh4_cache_init(void)
+{
+	printk("PVR=%08x CVR=%08x PRR=%08x\n",
+		__raw_readl(CCN_PVR),
+		__raw_readl(CCN_CVR),
+		__raw_readl(CCN_PRR));
+
+	local_flush_icache_range	= sh4_flush_icache_range;
+	local_flush_dcache_page		= sh4_flush_dcache_page;
+	local_flush_cache_all		= sh4_flush_cache_all;
+	local_flush_cache_mm		= sh4_flush_cache_mm;
+	local_flush_cache_dup_mm	= sh4_flush_cache_mm;
+	local_flush_cache_page		= sh4_flush_cache_page;
+	local_flush_cache_range		= sh4_flush_cache_range;
+
+	sh4__flush_region_init();
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/cache-sh5.c b/src/kernel/linux/v4.14/arch/sh/mm/cache-sh5.c
new file mode 100644
index 0000000..445b5e6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/cache-sh5.c
@@ -0,0 +1,621 @@
+/*
+ * arch/sh/mm/cache-sh5.c
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2002  Benedict Gaster
+ * Copyright (C) 2003  Richard Curnow
+ * Copyright (C) 2003 - 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <asm/tlb.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/pgalloc.h>
+#include <linux/uaccess.h>
+#include <asm/mmu_context.h>
+
+extern void __weak sh4__flush_region_init(void);
+
+/* Wired TLB entry for the D-cache */
+static unsigned long long dtlb_cache_slot;
+
+/*
+ * The following group of functions deal with mapping and unmapping a
+ * temporary page into a DTLB slot that has been set aside for exclusive
+ * use.
+ */
+static inline void
+sh64_setup_dtlb_cache_slot(unsigned long eaddr, unsigned long asid,
+			   unsigned long paddr)
+{
+	local_irq_disable();
+	sh64_setup_tlb_slot(dtlb_cache_slot, eaddr, asid, paddr);
+}
+
+static inline void sh64_teardown_dtlb_cache_slot(void)
+{
+	sh64_teardown_tlb_slot(dtlb_cache_slot);
+	local_irq_enable();
+}
+
+static inline void sh64_icache_inv_all(void)
+{
+	unsigned long long addr, flag, data;
+	unsigned long flags;
+
+	addr = ICCR0;
+	flag = ICCR0_ICI;
+	data = 0;
+
+	/* Make this a critical section for safety (probably not strictly necessary.) */
+	local_irq_save(flags);
+
+	/* Without %1 it gets unexplicably wrong */
+	__asm__ __volatile__ (
+		"getcfg	%3, 0, %0\n\t"
+		"or	%0, %2, %0\n\t"
+		"putcfg	%3, 0, %0\n\t"
+		"synci"
+		: "=&r" (data)
+		: "0" (data), "r" (flag), "r" (addr));
+
+	local_irq_restore(flags);
+}
+
+static void sh64_icache_inv_kernel_range(unsigned long start, unsigned long end)
+{
+	/* Invalidate range of addresses [start,end] from the I-cache, where
+	 * the addresses lie in the kernel superpage. */
+
+	unsigned long long ullend, addr, aligned_start;
+	aligned_start = (unsigned long long)(signed long long)(signed long) start;
+	addr = L1_CACHE_ALIGN(aligned_start);
+	ullend = (unsigned long long) (signed long long) (signed long) end;
+
+	while (addr <= ullend) {
+		__asm__ __volatile__ ("icbi %0, 0" : : "r" (addr));
+		addr += L1_CACHE_BYTES;
+	}
+}
+
+static void sh64_icache_inv_user_page(struct vm_area_struct *vma, unsigned long eaddr)
+{
+	/* If we get called, we know that vma->vm_flags contains VM_EXEC.
+	   Also, eaddr is page-aligned. */
+	unsigned int cpu = smp_processor_id();
+	unsigned long long addr, end_addr;
+	unsigned long flags = 0;
+	unsigned long running_asid, vma_asid;
+	addr = eaddr;
+	end_addr = addr + PAGE_SIZE;
+
+	/* Check whether we can use the current ASID for the I-cache
+	   invalidation.  For example, if we're called via
+	   access_process_vm->flush_cache_page->here, (e.g. when reading from
+	   /proc), 'running_asid' will be that of the reader, not of the
+	   victim.
+
+	   Also, note the risk that we might get pre-empted between the ASID
+	   compare and blocking IRQs, and before we regain control, the
+	   pid->ASID mapping changes.  However, the whole cache will get
+	   invalidated when the mapping is renewed, so the worst that can
+	   happen is that the loop below ends up invalidating somebody else's
+	   cache entries.
+	*/
+
+	running_asid = get_asid();
+	vma_asid = cpu_asid(cpu, vma->vm_mm);
+	if (running_asid != vma_asid) {
+		local_irq_save(flags);
+		switch_and_save_asid(vma_asid);
+	}
+	while (addr < end_addr) {
+		/* Worth unrolling a little */
+		__asm__ __volatile__("icbi %0,  0" : : "r" (addr));
+		__asm__ __volatile__("icbi %0, 32" : : "r" (addr));
+		__asm__ __volatile__("icbi %0, 64" : : "r" (addr));
+		__asm__ __volatile__("icbi %0, 96" : : "r" (addr));
+		addr += 128;
+	}
+	if (running_asid != vma_asid) {
+		switch_and_save_asid(running_asid);
+		local_irq_restore(flags);
+	}
+}
+
+static void sh64_icache_inv_user_page_range(struct mm_struct *mm,
+			  unsigned long start, unsigned long end)
+{
+	/* Used for invalidating big chunks of I-cache, i.e. assume the range
+	   is whole pages.  If 'start' or 'end' is not page aligned, the code
+	   is conservative and invalidates to the ends of the enclosing pages.
+	   This is functionally OK, just a performance loss. */
+
+	/* See the comments below in sh64_dcache_purge_user_range() regarding
+	   the choice of algorithm.  However, for the I-cache option (2) isn't
+	   available because there are no physical tags so aliases can't be
+	   resolved.  The icbi instruction has to be used through the user
+	   mapping.   Because icbi is cheaper than ocbp on a cache hit, it
+	   would be cheaper to use the selective code for a large range than is
+	   possible with the D-cache.  Just assume 64 for now as a working
+	   figure.
+	   */
+	int n_pages;
+
+	if (!mm)
+		return;
+
+	n_pages = ((end - start) >> PAGE_SHIFT);
+	if (n_pages >= 64) {
+		sh64_icache_inv_all();
+	} else {
+		unsigned long aligned_start;
+		unsigned long eaddr;
+		unsigned long after_last_page_start;
+		unsigned long mm_asid, current_asid;
+		unsigned long flags = 0;
+
+		mm_asid = cpu_asid(smp_processor_id(), mm);
+		current_asid = get_asid();
+
+		if (mm_asid != current_asid) {
+			/* Switch ASID and run the invalidate loop under cli */
+			local_irq_save(flags);
+			switch_and_save_asid(mm_asid);
+		}
+
+		aligned_start = start & PAGE_MASK;
+		after_last_page_start = PAGE_SIZE + ((end - 1) & PAGE_MASK);
+
+		while (aligned_start < after_last_page_start) {
+			struct vm_area_struct *vma;
+			unsigned long vma_end;
+			vma = find_vma(mm, aligned_start);
+			if (!vma || (aligned_start <= vma->vm_end)) {
+				/* Avoid getting stuck in an error condition */
+				aligned_start += PAGE_SIZE;
+				continue;
+			}
+			vma_end = vma->vm_end;
+			if (vma->vm_flags & VM_EXEC) {
+				/* Executable */
+				eaddr = aligned_start;
+				while (eaddr < vma_end) {
+					sh64_icache_inv_user_page(vma, eaddr);
+					eaddr += PAGE_SIZE;
+				}
+			}
+			aligned_start = vma->vm_end; /* Skip to start of next region */
+		}
+
+		if (mm_asid != current_asid) {
+			switch_and_save_asid(current_asid);
+			local_irq_restore(flags);
+		}
+	}
+}
+
+static void sh64_icache_inv_current_user_range(unsigned long start, unsigned long end)
+{
+	/* The icbi instruction never raises ITLBMISS.  i.e. if there's not a
+	   cache hit on the virtual tag the instruction ends there, without a
+	   TLB lookup. */
+
+	unsigned long long aligned_start;
+	unsigned long long ull_end;
+	unsigned long long addr;
+
+	ull_end = end;
+
+	/* Just invalidate over the range using the natural addresses.  TLB
+	   miss handling will be OK (TBC).  Since it's for the current process,
+	   either we're already in the right ASID context, or the ASIDs have
+	   been recycled since we were last active in which case we might just
+	   invalidate another processes I-cache entries : no worries, just a
+	   performance drop for him. */
+	aligned_start = L1_CACHE_ALIGN(start);
+	addr = aligned_start;
+	while (addr < ull_end) {
+		__asm__ __volatile__ ("icbi %0, 0" : : "r" (addr));
+		__asm__ __volatile__ ("nop");
+		__asm__ __volatile__ ("nop");
+		addr += L1_CACHE_BYTES;
+	}
+}
+
+/* Buffer used as the target of alloco instructions to purge data from cache
+   sets by natural eviction. -- RPC */
+#define DUMMY_ALLOCO_AREA_SIZE ((L1_CACHE_BYTES << 10) + (1024 * 4))
+static unsigned char dummy_alloco_area[DUMMY_ALLOCO_AREA_SIZE] __cacheline_aligned = { 0, };
+
+static inline void sh64_dcache_purge_sets(int sets_to_purge_base, int n_sets)
+{
+	/* Purge all ways in a particular block of sets, specified by the base
+	   set number and number of sets.  Can handle wrap-around, if that's
+	   needed.  */
+
+	int dummy_buffer_base_set;
+	unsigned long long eaddr, eaddr0, eaddr1;
+	int j;
+	int set_offset;
+
+	dummy_buffer_base_set = ((int)&dummy_alloco_area &
+				 cpu_data->dcache.entry_mask) >>
+				 cpu_data->dcache.entry_shift;
+	set_offset = sets_to_purge_base - dummy_buffer_base_set;
+
+	for (j = 0; j < n_sets; j++, set_offset++) {
+		set_offset &= (cpu_data->dcache.sets - 1);
+		eaddr0 = (unsigned long long)dummy_alloco_area +
+			(set_offset << cpu_data->dcache.entry_shift);
+
+		/*
+		 * Do one alloco which hits the required set per cache
+		 * way.  For write-back mode, this will purge the #ways
+		 * resident lines.  There's little point unrolling this
+		 * loop because the allocos stall more if they're too
+		 * close together.
+		 */
+		eaddr1 = eaddr0 + cpu_data->dcache.way_size *
+				  cpu_data->dcache.ways;
+
+		for (eaddr = eaddr0; eaddr < eaddr1;
+		     eaddr += cpu_data->dcache.way_size) {
+			__asm__ __volatile__ ("alloco %0, 0" : : "r" (eaddr));
+			__asm__ __volatile__ ("synco"); /* TAKum03020 */
+		}
+
+		eaddr1 = eaddr0 + cpu_data->dcache.way_size *
+				  cpu_data->dcache.ways;
+
+		for (eaddr = eaddr0; eaddr < eaddr1;
+		     eaddr += cpu_data->dcache.way_size) {
+			/*
+			 * Load from each address.  Required because
+			 * alloco is a NOP if the cache is write-through.
+			 */
+			if (test_bit(SH_CACHE_MODE_WT, &(cpu_data->dcache.flags)))
+				__raw_readb((unsigned long)eaddr);
+		}
+	}
+
+	/*
+	 * Don't use OCBI to invalidate the lines.  That costs cycles
+	 * directly.  If the dummy block is just left resident, it will
+	 * naturally get evicted as required.
+	 */
+}
+
+/*
+ * Purge the entire contents of the dcache.  The most efficient way to
+ * achieve this is to use alloco instructions on a region of unused
+ * memory equal in size to the cache, thereby causing the current
+ * contents to be discarded by natural eviction.  The alternative, namely
+ * reading every tag, setting up a mapping for the corresponding page and
+ * doing an OCBP for the line, would be much more expensive.
+ */
+static void sh64_dcache_purge_all(void)
+{
+
+	sh64_dcache_purge_sets(0, cpu_data->dcache.sets);
+}
+
+
+/* Assumes this address (+ (2**n_synbits) pages up from it) aren't used for
+   anything else in the kernel */
+#define MAGIC_PAGE0_START 0xffffffffec000000ULL
+
+/* Purge the physical page 'paddr' from the cache.  It's known that any
+ * cache lines requiring attention have the same page colour as the the
+ * address 'eaddr'.
+ *
+ * This relies on the fact that the D-cache matches on physical tags when
+ * no virtual tag matches.  So we create an alias for the original page
+ * and purge through that.  (Alternatively, we could have done this by
+ * switching ASID to match the original mapping and purged through that,
+ * but that involves ASID switching cost + probably a TLBMISS + refill
+ * anyway.)
+ */
+static void sh64_dcache_purge_coloured_phy_page(unsigned long paddr,
+					        unsigned long eaddr)
+{
+	unsigned long long magic_page_start;
+	unsigned long long magic_eaddr, magic_eaddr_end;
+
+	magic_page_start = MAGIC_PAGE0_START + (eaddr & CACHE_OC_SYN_MASK);
+
+	/* As long as the kernel is not pre-emptible, this doesn't need to be
+	   under cli/sti. */
+	sh64_setup_dtlb_cache_slot(magic_page_start, get_asid(), paddr);
+
+	magic_eaddr = magic_page_start;
+	magic_eaddr_end = magic_eaddr + PAGE_SIZE;
+
+	while (magic_eaddr < magic_eaddr_end) {
+		/* Little point in unrolling this loop - the OCBPs are blocking
+		   and won't go any quicker (i.e. the loop overhead is parallel
+		   to part of the OCBP execution.) */
+		__asm__ __volatile__ ("ocbp %0, 0" : : "r" (magic_eaddr));
+		magic_eaddr += L1_CACHE_BYTES;
+	}
+
+	sh64_teardown_dtlb_cache_slot();
+}
+
+/*
+ * Purge a page given its physical start address, by creating a temporary
+ * 1 page mapping and purging across that.  Even if we know the virtual
+ * address (& vma or mm) of the page, the method here is more elegant
+ * because it avoids issues of coping with page faults on the purge
+ * instructions (i.e. no special-case code required in the critical path
+ * in the TLB miss handling).
+ */
+static void sh64_dcache_purge_phy_page(unsigned long paddr)
+{
+	unsigned long long eaddr_start, eaddr, eaddr_end;
+	int i;
+
+	/* As long as the kernel is not pre-emptible, this doesn't need to be
+	   under cli/sti. */
+	eaddr_start = MAGIC_PAGE0_START;
+	for (i = 0; i < (1 << CACHE_OC_N_SYNBITS); i++) {
+		sh64_setup_dtlb_cache_slot(eaddr_start, get_asid(), paddr);
+
+		eaddr = eaddr_start;
+		eaddr_end = eaddr + PAGE_SIZE;
+		while (eaddr < eaddr_end) {
+			__asm__ __volatile__ ("ocbp %0, 0" : : "r" (eaddr));
+			eaddr += L1_CACHE_BYTES;
+		}
+
+		sh64_teardown_dtlb_cache_slot();
+		eaddr_start += PAGE_SIZE;
+	}
+}
+
+static void sh64_dcache_purge_user_pages(struct mm_struct *mm,
+				unsigned long addr, unsigned long end)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+	pte_t entry;
+	spinlock_t *ptl;
+	unsigned long paddr;
+
+	if (!mm)
+		return; /* No way to find physical address of page */
+
+	pgd = pgd_offset(mm, addr);
+	if (pgd_bad(*pgd))
+		return;
+
+	pud = pud_offset(pgd, addr);
+	if (pud_none(*pud) || pud_bad(*pud))
+		return;
+
+	pmd = pmd_offset(pud, addr);
+	if (pmd_none(*pmd) || pmd_bad(*pmd))
+		return;
+
+	pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
+	do {
+		entry = *pte;
+		if (pte_none(entry) || !pte_present(entry))
+			continue;
+		paddr = pte_val(entry) & PAGE_MASK;
+		sh64_dcache_purge_coloured_phy_page(paddr, addr);
+	} while (pte++, addr += PAGE_SIZE, addr != end);
+	pte_unmap_unlock(pte - 1, ptl);
+}
+
+/*
+ * There are at least 5 choices for the implementation of this, with
+ * pros (+), cons(-), comments(*):
+ *
+ * 1. ocbp each line in the range through the original user's ASID
+ *    + no lines spuriously evicted
+ *    - tlbmiss handling (must either handle faults on demand => extra
+ *	special-case code in tlbmiss critical path), or map the page in
+ *	advance (=> flush_tlb_range in advance to avoid multiple hits)
+ *    - ASID switching
+ *    - expensive for large ranges
+ *
+ * 2. temporarily map each page in the range to a special effective
+ *    address and ocbp through the temporary mapping; relies on the
+ *    fact that SH-5 OCB* always do TLB lookup and match on ptags (they
+ *    never look at the etags)
+ *    + no spurious evictions
+ *    - expensive for large ranges
+ *    * surely cheaper than (1)
+ *
+ * 3. walk all the lines in the cache, check the tags, if a match
+ *    occurs create a page mapping to ocbp the line through
+ *    + no spurious evictions
+ *    - tag inspection overhead
+ *    - (especially for small ranges)
+ *    - potential cost of setting up/tearing down page mapping for
+ *	every line that matches the range
+ *    * cost partly independent of range size
+ *
+ * 4. walk all the lines in the cache, check the tags, if a match
+ *    occurs use 4 * alloco to purge the line (+3 other probably
+ *    innocent victims) by natural eviction
+ *    + no tlb mapping overheads
+ *    - spurious evictions
+ *    - tag inspection overhead
+ *
+ * 5. implement like flush_cache_all
+ *    + no tag inspection overhead
+ *    - spurious evictions
+ *    - bad for small ranges
+ *
+ * (1) can be ruled out as more expensive than (2).  (2) appears best
+ * for small ranges.  The choice between (3), (4) and (5) for large
+ * ranges and the range size for the large/small boundary need
+ * benchmarking to determine.
+ *
+ * For now use approach (2) for small ranges and (5) for large ones.
+ */
+static void sh64_dcache_purge_user_range(struct mm_struct *mm,
+			  unsigned long start, unsigned long end)
+{
+	int n_pages = ((end - start) >> PAGE_SHIFT);
+
+	if (n_pages >= 64 || ((start ^ (end - 1)) & PMD_MASK)) {
+		sh64_dcache_purge_all();
+	} else {
+		/* Small range, covered by a single page table page */
+		start &= PAGE_MASK;	/* should already be so */
+		end = PAGE_ALIGN(end);	/* should already be so */
+		sh64_dcache_purge_user_pages(mm, start, end);
+	}
+}
+
+/*
+ * Invalidate the entire contents of both caches, after writing back to
+ * memory any dirty data from the D-cache.
+ */
+static void sh5_flush_cache_all(void *unused)
+{
+	sh64_dcache_purge_all();
+	sh64_icache_inv_all();
+}
+
+/*
+ * Invalidate an entire user-address space from both caches, after
+ * writing back dirty data (e.g. for shared mmap etc).
+ *
+ * This could be coded selectively by inspecting all the tags then
+ * doing 4*alloco on any set containing a match (as for
+ * flush_cache_range), but fork/exit/execve (where this is called from)
+ * are expensive anyway.
+ *
+ * Have to do a purge here, despite the comments re I-cache below.
+ * There could be odd-coloured dirty data associated with the mm still
+ * in the cache - if this gets written out through natural eviction
+ * after the kernel has reused the page there will be chaos.
+ *
+ * The mm being torn down won't ever be active again, so any Icache
+ * lines tagged with its ASID won't be visible for the rest of the
+ * lifetime of this ASID cycle.  Before the ASID gets reused, there
+ * will be a flush_cache_all.  Hence we don't need to touch the
+ * I-cache.  This is similar to the lack of action needed in
+ * flush_tlb_mm - see fault.c.
+ */
+static void sh5_flush_cache_mm(void *unused)
+{
+	sh64_dcache_purge_all();
+}
+
+/*
+ * Invalidate (from both caches) the range [start,end) of virtual
+ * addresses from the user address space specified by mm, after writing
+ * back any dirty data.
+ *
+ * Note, 'end' is 1 byte beyond the end of the range to flush.
+ */
+static void sh5_flush_cache_range(void *args)
+{
+	struct flusher_data *data = args;
+	struct vm_area_struct *vma;
+	unsigned long start, end;
+
+	vma = data->vma;
+	start = data->addr1;
+	end = data->addr2;
+
+	sh64_dcache_purge_user_range(vma->vm_mm, start, end);
+	sh64_icache_inv_user_page_range(vma->vm_mm, start, end);
+}
+
+/*
+ * Invalidate any entries in either cache for the vma within the user
+ * address space vma->vm_mm for the page starting at virtual address
+ * 'eaddr'.   This seems to be used primarily in breaking COW.  Note,
+ * the I-cache must be searched too in case the page in question is
+ * both writable and being executed from (e.g. stack trampolines.)
+ *
+ * Note, this is called with pte lock held.
+ */
+static void sh5_flush_cache_page(void *args)
+{
+	struct flusher_data *data = args;
+	struct vm_area_struct *vma;
+	unsigned long eaddr, pfn;
+
+	vma = data->vma;
+	eaddr = data->addr1;
+	pfn = data->addr2;
+
+	sh64_dcache_purge_phy_page(pfn << PAGE_SHIFT);
+
+	if (vma->vm_flags & VM_EXEC)
+		sh64_icache_inv_user_page(vma, eaddr);
+}
+
+static void sh5_flush_dcache_page(void *page)
+{
+	sh64_dcache_purge_phy_page(page_to_phys((struct page *)page));
+	wmb();
+}
+
+/*
+ * Flush the range [start,end] of kernel virtual address space from
+ * the I-cache.  The corresponding range must be purged from the
+ * D-cache also because the SH-5 doesn't have cache snooping between
+ * the caches.  The addresses will be visible through the superpage
+ * mapping, therefore it's guaranteed that there no cache entries for
+ * the range in cache sets of the wrong colour.
+ */
+static void sh5_flush_icache_range(void *args)
+{
+	struct flusher_data *data = args;
+	unsigned long start, end;
+
+	start = data->addr1;
+	end = data->addr2;
+
+	__flush_purge_region((void *)start, end);
+	wmb();
+	sh64_icache_inv_kernel_range(start, end);
+}
+
+/*
+ * For the address range [start,end), write back the data from the
+ * D-cache and invalidate the corresponding region of the I-cache for the
+ * current process.  Used to flush signal trampolines on the stack to
+ * make them executable.
+ */
+static void sh5_flush_cache_sigtramp(void *vaddr)
+{
+	unsigned long end = (unsigned long)vaddr + L1_CACHE_BYTES;
+
+	__flush_wback_region(vaddr, L1_CACHE_BYTES);
+	wmb();
+	sh64_icache_inv_current_user_range((unsigned long)vaddr, end);
+}
+
+void __init sh5_cache_init(void)
+{
+	local_flush_cache_all		= sh5_flush_cache_all;
+	local_flush_cache_mm		= sh5_flush_cache_mm;
+	local_flush_cache_dup_mm	= sh5_flush_cache_mm;
+	local_flush_cache_page		= sh5_flush_cache_page;
+	local_flush_cache_range		= sh5_flush_cache_range;
+	local_flush_dcache_page		= sh5_flush_dcache_page;
+	local_flush_icache_range	= sh5_flush_icache_range;
+	local_flush_cache_sigtramp	= sh5_flush_cache_sigtramp;
+
+	/* Reserve a slot for dcache colouring in the DTLB */
+	dtlb_cache_slot	= sh64_get_wired_dtlb_entry();
+
+	sh4__flush_region_init();
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/cache-sh7705.c b/src/kernel/linux/v4.14/arch/sh/mm/cache-sh7705.c
new file mode 100644
index 0000000..6cd2aa3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/cache-sh7705.c
@@ -0,0 +1,195 @@
+/*
+ * arch/sh/mm/cache-sh7705.c
+ *
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ * Copyright (C) 2004  Alex Song
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/threads.h>
+#include <asm/addrspace.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+/*
+ * The 32KB cache on the SH7705 suffers from the same synonym problem
+ * as SH4 CPUs
+ */
+static inline void cache_wback_all(void)
+{
+	unsigned long ways, waysize, addrstart;
+
+	ways = current_cpu_data.dcache.ways;
+	waysize = current_cpu_data.dcache.sets;
+	waysize <<= current_cpu_data.dcache.entry_shift;
+
+	addrstart = CACHE_OC_ADDRESS_ARRAY;
+
+	do {
+		unsigned long addr;
+
+		for (addr = addrstart;
+		     addr < addrstart + waysize;
+		     addr += current_cpu_data.dcache.linesz) {
+			unsigned long data;
+			int v = SH_CACHE_UPDATED | SH_CACHE_VALID;
+
+			data = __raw_readl(addr);
+
+			if ((data & v) == v)
+				__raw_writel(data & ~v, addr);
+
+		}
+
+		addrstart += current_cpu_data.dcache.way_incr;
+	} while (--ways);
+}
+
+/*
+ * Write back the range of D-cache, and purge the I-cache.
+ *
+ * Called from kernel/module.c:sys_init_module and routine for a.out format.
+ */
+static void sh7705_flush_icache_range(void *args)
+{
+	struct flusher_data *data = args;
+	unsigned long start, end;
+
+	start = data->addr1;
+	end = data->addr2;
+
+	__flush_wback_region((void *)start, end - start);
+}
+
+/*
+ * Writeback&Invalidate the D-cache of the page
+ */
+static void __flush_dcache_page(unsigned long phys)
+{
+	unsigned long ways, waysize, addrstart;
+	unsigned long flags;
+
+	phys |= SH_CACHE_VALID;
+
+	/*
+	 * Here, phys is the physical address of the page. We check all the
+	 * tags in the cache for those with the same page number as this page
+	 * (by masking off the lowest 2 bits of the 19-bit tag; these bits are
+	 * derived from the offset within in the 4k page). Matching valid
+	 * entries are invalidated.
+	 *
+	 * Since 2 bits of the cache index are derived from the virtual page
+	 * number, knowing this would reduce the number of cache entries to be
+	 * searched by a factor of 4. However this function exists to deal with
+	 * potential cache aliasing, therefore the optimisation is probably not
+	 * possible.
+	 */
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	ways = current_cpu_data.dcache.ways;
+	waysize = current_cpu_data.dcache.sets;
+	waysize <<= current_cpu_data.dcache.entry_shift;
+
+	addrstart = CACHE_OC_ADDRESS_ARRAY;
+
+	do {
+		unsigned long addr;
+
+		for (addr = addrstart;
+		     addr < addrstart + waysize;
+		     addr += current_cpu_data.dcache.linesz) {
+			unsigned long data;
+
+			data = __raw_readl(addr) & (0x1ffffC00 | SH_CACHE_VALID);
+		        if (data == phys) {
+				data &= ~(SH_CACHE_VALID | SH_CACHE_UPDATED);
+				__raw_writel(data, addr);
+			}
+		}
+
+		addrstart += current_cpu_data.dcache.way_incr;
+	} while (--ways);
+
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+/*
+ * Write back & invalidate the D-cache of the page.
+ * (To avoid "alias" issues)
+ */
+static void sh7705_flush_dcache_page(void *arg)
+{
+	struct page *page = arg;
+	struct address_space *mapping = page_mapping(page);
+
+	if (mapping && !mapping_mapped(mapping))
+		clear_bit(PG_dcache_clean, &page->flags);
+	else
+		__flush_dcache_page(__pa(page_address(page)));
+}
+
+static void sh7705_flush_cache_all(void *args)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	cache_wback_all();
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+/*
+ * Write back and invalidate I/D-caches for the page.
+ *
+ * ADDRESS: Virtual Address (U0 address)
+ */
+static void sh7705_flush_cache_page(void *args)
+{
+	struct flusher_data *data = args;
+	unsigned long pfn = data->addr2;
+
+	__flush_dcache_page(pfn << PAGE_SHIFT);
+}
+
+/*
+ * This is called when a page-cache page is about to be mapped into a
+ * user process' address space.  It offers an opportunity for a
+ * port to ensure d-cache/i-cache coherency if necessary.
+ *
+ * Not entirely sure why this is necessary on SH3 with 32K cache but
+ * without it we get occasional "Memory fault" when loading a program.
+ */
+static void sh7705_flush_icache_page(void *page)
+{
+	__flush_purge_region(page_address(page), PAGE_SIZE);
+}
+
+void __init sh7705_cache_init(void)
+{
+	local_flush_icache_range	= sh7705_flush_icache_range;
+	local_flush_dcache_page		= sh7705_flush_dcache_page;
+	local_flush_cache_all		= sh7705_flush_cache_all;
+	local_flush_cache_mm		= sh7705_flush_cache_all;
+	local_flush_cache_dup_mm	= sh7705_flush_cache_all;
+	local_flush_cache_range		= sh7705_flush_cache_all;
+	local_flush_cache_page		= sh7705_flush_cache_page;
+	local_flush_icache_page		= sh7705_flush_icache_page;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/cache-shx3.c b/src/kernel/linux/v4.14/arch/sh/mm/cache-shx3.c
new file mode 100644
index 0000000..24c58b7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/cache-shx3.c
@@ -0,0 +1,44 @@
+/*
+ * arch/sh/mm/cache-shx3.c - SH-X3 optimized cache ops
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/cache.h>
+
+#define CCR_CACHE_SNM	0x40000		/* Hardware-assisted synonym avoidance */
+#define CCR_CACHE_IBE	0x1000000	/* ICBI broadcast */
+
+void __init shx3_cache_init(void)
+{
+	unsigned int ccr;
+
+	ccr = __raw_readl(SH_CCR);
+
+	/*
+	 * If we've got cache aliases, resolve them in hardware.
+	 */
+	if (boot_cpu_data.dcache.n_aliases || boot_cpu_data.icache.n_aliases) {
+		ccr |= CCR_CACHE_SNM;
+
+		boot_cpu_data.icache.n_aliases = 0;
+		boot_cpu_data.dcache.n_aliases = 0;
+
+		pr_info("Enabling hardware synonym avoidance\n");
+	}
+
+#ifdef CONFIG_SMP
+	/*
+	 * Broadcast I-cache block invalidations by default.
+	 */
+	ccr |= CCR_CACHE_IBE;
+#endif
+
+	writel_uncached(ccr, SH_CCR);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/cache.c b/src/kernel/linux/v4.14/arch/sh/mm/cache.c
new file mode 100644
index 0000000..36554a9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/cache.c
@@ -0,0 +1,367 @@
+/*
+ * arch/sh/mm/cache.c
+ *
+ * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
+ * Copyright (C) 2002 - 2010  Paul Mundt
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/fs.h>
+#include <linux/smp.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+void (*local_flush_cache_all)(void *args) = cache_noop;
+void (*local_flush_cache_mm)(void *args) = cache_noop;
+void (*local_flush_cache_dup_mm)(void *args) = cache_noop;
+void (*local_flush_cache_page)(void *args) = cache_noop;
+void (*local_flush_cache_range)(void *args) = cache_noop;
+void (*local_flush_dcache_page)(void *args) = cache_noop;
+void (*local_flush_icache_range)(void *args) = cache_noop;
+void (*local_flush_icache_page)(void *args) = cache_noop;
+void (*local_flush_cache_sigtramp)(void *args) = cache_noop;
+
+void (*__flush_wback_region)(void *start, int size);
+EXPORT_SYMBOL(__flush_wback_region);
+void (*__flush_purge_region)(void *start, int size);
+EXPORT_SYMBOL(__flush_purge_region);
+void (*__flush_invalidate_region)(void *start, int size);
+EXPORT_SYMBOL(__flush_invalidate_region);
+
+static inline void noop__flush_region(void *start, int size)
+{
+}
+
+static inline void cacheop_on_each_cpu(void (*func) (void *info), void *info,
+                                   int wait)
+{
+	preempt_disable();
+
+	/* Needing IPI for cross-core flush is SHX3-specific. */
+#ifdef CONFIG_CPU_SHX3
+	/*
+	 * It's possible that this gets called early on when IRQs are
+	 * still disabled due to ioremapping by the boot CPU, so don't
+	 * even attempt IPIs unless there are other CPUs online.
+	 */
+	if (num_online_cpus() > 1)
+		smp_call_function(func, info, wait);
+#endif
+
+	func(info);
+
+	preempt_enable();
+}
+
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+		       unsigned long vaddr, void *dst, const void *src,
+		       unsigned long len)
+{
+	if (boot_cpu_data.dcache.n_aliases && page_mapcount(page) &&
+	    test_bit(PG_dcache_clean, &page->flags)) {
+		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+		memcpy(vto, src, len);
+		kunmap_coherent(vto);
+	} else {
+		memcpy(dst, src, len);
+		if (boot_cpu_data.dcache.n_aliases)
+			clear_bit(PG_dcache_clean, &page->flags);
+	}
+
+	if (vma->vm_flags & VM_EXEC)
+		flush_cache_page(vma, vaddr, page_to_pfn(page));
+}
+
+void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
+			 unsigned long vaddr, void *dst, const void *src,
+			 unsigned long len)
+{
+	if (boot_cpu_data.dcache.n_aliases && page_mapcount(page) &&
+	    test_bit(PG_dcache_clean, &page->flags)) {
+		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+		memcpy(dst, vfrom, len);
+		kunmap_coherent(vfrom);
+	} else {
+		memcpy(dst, src, len);
+		if (boot_cpu_data.dcache.n_aliases)
+			clear_bit(PG_dcache_clean, &page->flags);
+	}
+}
+
+void copy_user_highpage(struct page *to, struct page *from,
+			unsigned long vaddr, struct vm_area_struct *vma)
+{
+	void *vfrom, *vto;
+
+	vto = kmap_atomic(to);
+
+	if (boot_cpu_data.dcache.n_aliases && page_mapcount(from) &&
+	    test_bit(PG_dcache_clean, &from->flags)) {
+		vfrom = kmap_coherent(from, vaddr);
+		copy_page(vto, vfrom);
+		kunmap_coherent(vfrom);
+	} else {
+		vfrom = kmap_atomic(from);
+		copy_page(vto, vfrom);
+		kunmap_atomic(vfrom);
+	}
+
+	if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK) ||
+	    (vma->vm_flags & VM_EXEC))
+		__flush_purge_region(vto, PAGE_SIZE);
+
+	kunmap_atomic(vto);
+	/* Make sure this page is cleared on other CPU's too before using it */
+	smp_wmb();
+}
+EXPORT_SYMBOL(copy_user_highpage);
+
+void clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+	void *kaddr = kmap_atomic(page);
+
+	clear_page(kaddr);
+
+	if (pages_do_alias((unsigned long)kaddr, vaddr & PAGE_MASK))
+		__flush_purge_region(kaddr, PAGE_SIZE);
+
+	kunmap_atomic(kaddr);
+}
+EXPORT_SYMBOL(clear_user_highpage);
+
+void __update_cache(struct vm_area_struct *vma,
+		    unsigned long address, pte_t pte)
+{
+	struct page *page;
+	unsigned long pfn = pte_pfn(pte);
+
+	if (!boot_cpu_data.dcache.n_aliases)
+		return;
+
+	page = pfn_to_page(pfn);
+	if (pfn_valid(pfn)) {
+		int dirty = !test_and_set_bit(PG_dcache_clean, &page->flags);
+		if (dirty)
+			__flush_purge_region(page_address(page), PAGE_SIZE);
+	}
+}
+
+void __flush_anon_page(struct page *page, unsigned long vmaddr)
+{
+	unsigned long addr = (unsigned long) page_address(page);
+
+	if (pages_do_alias(addr, vmaddr)) {
+		if (boot_cpu_data.dcache.n_aliases && page_mapcount(page) &&
+		    test_bit(PG_dcache_clean, &page->flags)) {
+			void *kaddr;
+
+			kaddr = kmap_coherent(page, vmaddr);
+			/* XXX.. For now kunmap_coherent() does a purge */
+			/* __flush_purge_region((void *)kaddr, PAGE_SIZE); */
+			kunmap_coherent(kaddr);
+		} else
+			__flush_purge_region((void *)addr, PAGE_SIZE);
+	}
+}
+
+void flush_cache_all(void)
+{
+	cacheop_on_each_cpu(local_flush_cache_all, NULL, 1);
+}
+EXPORT_SYMBOL(flush_cache_all);
+
+void flush_cache_mm(struct mm_struct *mm)
+{
+	if (boot_cpu_data.dcache.n_aliases == 0)
+		return;
+
+	cacheop_on_each_cpu(local_flush_cache_mm, mm, 1);
+}
+
+void flush_cache_dup_mm(struct mm_struct *mm)
+{
+	if (boot_cpu_data.dcache.n_aliases == 0)
+		return;
+
+	cacheop_on_each_cpu(local_flush_cache_dup_mm, mm, 1);
+}
+
+void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
+		      unsigned long pfn)
+{
+	struct flusher_data data;
+
+	data.vma = vma;
+	data.addr1 = addr;
+	data.addr2 = pfn;
+
+	cacheop_on_each_cpu(local_flush_cache_page, (void *)&data, 1);
+}
+
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+		       unsigned long end)
+{
+	struct flusher_data data;
+
+	data.vma = vma;
+	data.addr1 = start;
+	data.addr2 = end;
+
+	cacheop_on_each_cpu(local_flush_cache_range, (void *)&data, 1);
+}
+EXPORT_SYMBOL(flush_cache_range);
+
+void flush_dcache_page(struct page *page)
+{
+	cacheop_on_each_cpu(local_flush_dcache_page, page, 1);
+}
+EXPORT_SYMBOL(flush_dcache_page);
+
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+	struct flusher_data data;
+
+	data.vma = NULL;
+	data.addr1 = start;
+	data.addr2 = end;
+
+	cacheop_on_each_cpu(local_flush_icache_range, (void *)&data, 1);
+}
+EXPORT_SYMBOL(flush_icache_range);
+
+void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+{
+	/* Nothing uses the VMA, so just pass the struct page along */
+	cacheop_on_each_cpu(local_flush_icache_page, page, 1);
+}
+
+void flush_cache_sigtramp(unsigned long address)
+{
+	cacheop_on_each_cpu(local_flush_cache_sigtramp, (void *)address, 1);
+}
+
+static void compute_alias(struct cache_info *c)
+{
+#ifdef CONFIG_MMU
+	c->alias_mask = ((c->sets - 1) << c->entry_shift) & ~(PAGE_SIZE - 1);
+#else
+	c->alias_mask = 0;
+#endif
+	c->n_aliases = c->alias_mask ? (c->alias_mask >> PAGE_SHIFT) + 1 : 0;
+}
+
+static void __init emit_cache_params(void)
+{
+	printk(KERN_NOTICE "I-cache : n_ways=%d n_sets=%d way_incr=%d\n",
+		boot_cpu_data.icache.ways,
+		boot_cpu_data.icache.sets,
+		boot_cpu_data.icache.way_incr);
+	printk(KERN_NOTICE "I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
+		boot_cpu_data.icache.entry_mask,
+		boot_cpu_data.icache.alias_mask,
+		boot_cpu_data.icache.n_aliases);
+	printk(KERN_NOTICE "D-cache : n_ways=%d n_sets=%d way_incr=%d\n",
+		boot_cpu_data.dcache.ways,
+		boot_cpu_data.dcache.sets,
+		boot_cpu_data.dcache.way_incr);
+	printk(KERN_NOTICE "D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
+		boot_cpu_data.dcache.entry_mask,
+		boot_cpu_data.dcache.alias_mask,
+		boot_cpu_data.dcache.n_aliases);
+
+	/*
+	 * Emit Secondary Cache parameters if the CPU has a probed L2.
+	 */
+	if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
+		printk(KERN_NOTICE "S-cache : n_ways=%d n_sets=%d way_incr=%d\n",
+			boot_cpu_data.scache.ways,
+			boot_cpu_data.scache.sets,
+			boot_cpu_data.scache.way_incr);
+		printk(KERN_NOTICE "S-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
+			boot_cpu_data.scache.entry_mask,
+			boot_cpu_data.scache.alias_mask,
+			boot_cpu_data.scache.n_aliases);
+	}
+}
+
+void __init cpu_cache_init(void)
+{
+	unsigned int cache_disabled = 0;
+
+#ifdef SH_CCR
+	cache_disabled = !(__raw_readl(SH_CCR) & CCR_CACHE_ENABLE);
+#endif
+
+	compute_alias(&boot_cpu_data.icache);
+	compute_alias(&boot_cpu_data.dcache);
+	compute_alias(&boot_cpu_data.scache);
+
+	__flush_wback_region		= noop__flush_region;
+	__flush_purge_region		= noop__flush_region;
+	__flush_invalidate_region	= noop__flush_region;
+
+	/*
+	 * No flushing is necessary in the disabled cache case so we can
+	 * just keep the noop functions in local_flush_..() and __flush_..()
+	 */
+	if (unlikely(cache_disabled))
+		goto skip;
+
+	if (boot_cpu_data.type == CPU_J2) {
+		extern void __weak j2_cache_init(void);
+
+		j2_cache_init();
+	} else if (boot_cpu_data.family == CPU_FAMILY_SH2) {
+		extern void __weak sh2_cache_init(void);
+
+		sh2_cache_init();
+	}
+
+	if (boot_cpu_data.family == CPU_FAMILY_SH2A) {
+		extern void __weak sh2a_cache_init(void);
+
+		sh2a_cache_init();
+	}
+
+	if (boot_cpu_data.family == CPU_FAMILY_SH3) {
+		extern void __weak sh3_cache_init(void);
+
+		sh3_cache_init();
+
+		if ((boot_cpu_data.type == CPU_SH7705) &&
+		    (boot_cpu_data.dcache.sets == 512)) {
+			extern void __weak sh7705_cache_init(void);
+
+			sh7705_cache_init();
+		}
+	}
+
+	if ((boot_cpu_data.family == CPU_FAMILY_SH4) ||
+	    (boot_cpu_data.family == CPU_FAMILY_SH4A) ||
+	    (boot_cpu_data.family == CPU_FAMILY_SH4AL_DSP)) {
+		extern void __weak sh4_cache_init(void);
+
+		sh4_cache_init();
+
+		if ((boot_cpu_data.type == CPU_SH7786) ||
+		    (boot_cpu_data.type == CPU_SHX3)) {
+			extern void __weak shx3_cache_init(void);
+
+			shx3_cache_init();
+		}
+	}
+
+	if (boot_cpu_data.family == CPU_FAMILY_SH5) {
+		extern void __weak sh5_cache_init(void);
+
+		sh5_cache_init();
+	}
+
+skip:
+	emit_cache_params();
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/consistent.c b/src/kernel/linux/v4.14/arch/sh/mm/consistent.c
new file mode 100644
index 0000000..d1275ad
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/consistent.c
@@ -0,0 +1,159 @@
+/*
+ * arch/sh/mm/consistent.c
+ *
+ * Copyright (C) 2004 - 2007  Paul Mundt
+ *
+ * Declared coherent memory functions based on arch/x86/kernel/pci-dma_32.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma-debug.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/gfp.h>
+#include <asm/cacheflush.h>
+#include <asm/addrspace.h>
+
+#define PREALLOC_DMA_DEBUG_ENTRIES	4096
+
+const struct dma_map_ops *dma_ops;
+EXPORT_SYMBOL(dma_ops);
+
+static int __init dma_init(void)
+{
+	dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+	return 0;
+}
+fs_initcall(dma_init);
+
+void *dma_generic_alloc_coherent(struct device *dev, size_t size,
+				 dma_addr_t *dma_handle, gfp_t gfp,
+				 unsigned long attrs)
+{
+	void *ret, *ret_nocache;
+	int order = get_order(size);
+
+	gfp |= __GFP_ZERO;
+
+	ret = (void *)__get_free_pages(gfp, order);
+	if (!ret)
+		return NULL;
+
+	/*
+	 * Pages from the page allocator may have data present in
+	 * cache. So flush the cache before using uncached memory.
+	 */
+	dma_cache_sync(dev, ret, size, DMA_BIDIRECTIONAL);
+
+	ret_nocache = (void __force *)ioremap_nocache(virt_to_phys(ret), size);
+	if (!ret_nocache) {
+		free_pages((unsigned long)ret, order);
+		return NULL;
+	}
+
+	split_page(pfn_to_page(virt_to_phys(ret) >> PAGE_SHIFT), order);
+
+	*dma_handle = virt_to_phys(ret);
+
+	return ret_nocache;
+}
+
+void dma_generic_free_coherent(struct device *dev, size_t size,
+			       void *vaddr, dma_addr_t dma_handle,
+			       unsigned long attrs)
+{
+	int order = get_order(size);
+	unsigned long pfn = dma_handle >> PAGE_SHIFT;
+	int k;
+
+	for (k = 0; k < (1 << order); k++)
+		__free_pages(pfn_to_page(pfn + k), 0);
+
+	iounmap(vaddr);
+}
+
+void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+		    enum dma_data_direction direction)
+{
+	void *addr;
+
+	addr = __in_29bit_mode() ?
+	       (void *)CAC_ADDR((unsigned long)vaddr) : vaddr;
+
+	switch (direction) {
+	case DMA_FROM_DEVICE:		/* invalidate only */
+		__flush_invalidate_region(addr, size);
+		break;
+	case DMA_TO_DEVICE:		/* writeback only */
+		__flush_wback_region(addr, size);
+		break;
+	case DMA_BIDIRECTIONAL:		/* writeback and invalidate */
+		__flush_purge_region(addr, size);
+		break;
+	default:
+		BUG();
+	}
+}
+EXPORT_SYMBOL(dma_cache_sync);
+
+static int __init memchunk_setup(char *str)
+{
+	return 1; /* accept anything that begins with "memchunk." */
+}
+__setup("memchunk.", memchunk_setup);
+
+static void __init memchunk_cmdline_override(char *name, unsigned long *sizep)
+{
+	char *p = boot_command_line;
+	int k = strlen(name);
+
+	while ((p = strstr(p, "memchunk."))) {
+		p += 9; /* strlen("memchunk.") */
+		if (!strncmp(name, p, k) && p[k] == '=') {
+			p += k + 1;
+			*sizep = memparse(p, NULL);
+			pr_info("%s: forcing memory chunk size to 0x%08lx\n",
+				name, *sizep);
+			break;
+		}
+	}
+}
+
+int __init platform_resource_setup_memory(struct platform_device *pdev,
+					  char *name, unsigned long memsize)
+{
+	struct resource *r;
+	dma_addr_t dma_handle;
+	void *buf;
+
+	r = pdev->resource + pdev->num_resources - 1;
+	if (r->flags) {
+		pr_warning("%s: unable to find empty space for resource\n",
+			name);
+		return -EINVAL;
+	}
+
+	memchunk_cmdline_override(name, &memsize);
+	if (!memsize)
+		return 0;
+
+	buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_warning("%s: unable to allocate memory\n", name);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, memsize);
+
+	r->flags = IORESOURCE_MEM;
+	r->start = dma_handle;
+	r->end = r->start + memsize - 1;
+	r->name = name;
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/extable_32.c b/src/kernel/linux/v4.14/arch/sh/mm/extable_32.c
new file mode 100644
index 0000000..1431202
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/extable_32.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/mm/extable.c
+ *  Taken from:
+ *   linux/arch/i386/mm/extable.c
+ */
+
+#include <linux/extable.h>
+#include <linux/uaccess.h>
+
+#include <asm/ptrace.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+	const struct exception_table_entry *fixup;
+
+	fixup = search_exception_tables(regs->pc);
+	if (fixup) {
+		regs->pc = fixup->fixup;
+		return 1;
+	}
+
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/extable_64.c b/src/kernel/linux/v4.14/arch/sh/mm/extable_64.c
new file mode 100644
index 0000000..7a3b4d3
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/extable_64.c
@@ -0,0 +1,84 @@
+/*
+ * arch/sh/mm/extable_64.c
+ *
+ * Copyright (C) 2003 Richard Curnow
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * Cloned from the 2.5 SH version..
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/bsearch.h>
+#include <linux/rwsem.h>
+#include <linux/extable.h>
+#include <linux/uaccess.h>
+
+extern unsigned long copy_user_memcpy, copy_user_memcpy_end;
+extern void __copy_user_fixup(void);
+
+static const struct exception_table_entry __copy_user_fixup_ex = {
+	.fixup = (unsigned long)&__copy_user_fixup,
+};
+
+/*
+ * Some functions that may trap due to a bad user-mode address have too
+ * many loads and stores in them to make it at all practical to label
+ * each one and put them all in the main exception table.
+ *
+ * In particular, the fast memcpy routine is like this.  It's fix-up is
+ * just to fall back to a slow byte-at-a-time copy, which is handled the
+ * conventional way.  So it's functionally OK to just handle any trap
+ * occurring in the fast memcpy with that fixup.
+ */
+static const struct exception_table_entry *check_exception_ranges(unsigned long addr)
+{
+	if ((addr >= (unsigned long)&copy_user_memcpy) &&
+	    (addr <= (unsigned long)&copy_user_memcpy_end))
+		return &__copy_user_fixup_ex;
+
+	return NULL;
+}
+
+static int cmp_ex_search(const void *key, const void *elt)
+{
+	const struct exception_table_entry *_elt = elt;
+	unsigned long _key = *(unsigned long *)key;
+
+	/* avoid overflow */
+	if (_key > _elt->insn)
+		return 1;
+	if (_key < _elt->insn)
+		return -1;
+	return 0;
+}
+
+/* Simple binary search */
+const struct exception_table_entry *
+search_extable(const struct exception_table_entry *base,
+		 const size_t num,
+		 unsigned long value)
+{
+	const struct exception_table_entry *mid;
+
+	mid = check_exception_ranges(value);
+	if (mid)
+		return mid;
+
+	return bsearch(&value, base, num,
+		       sizeof(struct exception_table_entry), cmp_ex_search);
+}
+
+int fixup_exception(struct pt_regs *regs)
+{
+	const struct exception_table_entry *fixup;
+
+	fixup = search_exception_tables(regs->pc);
+	if (fixup) {
+		regs->pc = fixup->fixup;
+		return 1;
+	}
+
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/fault.c b/src/kernel/linux/v4.14/arch/sh/mm/fault.c
new file mode 100644
index 0000000..6fd1bf7
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/fault.c
@@ -0,0 +1,521 @@
+/*
+ * Page fault handler for SH with an MMU.
+ *
+ *  Copyright (C) 1999  Niibe Yutaka
+ *  Copyright (C) 2003 - 2012  Paul Mundt
+ *
+ *  Based on linux/arch/i386/mm/fault.c:
+ *   Copyright (C) 1995  Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/sched/signal.h>
+#include <linux/hardirq.h>
+#include <linux/kprobes.h>
+#include <linux/perf_event.h>
+#include <linux/kdebug.h>
+#include <linux/uaccess.h>
+#include <asm/io_trapped.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+#include <asm/traps.h>
+
+static inline int notify_page_fault(struct pt_regs *regs, int trap)
+{
+	int ret = 0;
+
+	if (kprobes_built_in() && !user_mode(regs)) {
+		preempt_disable();
+		if (kprobe_running() && kprobe_fault_handler(regs, trap))
+			ret = 1;
+		preempt_enable();
+	}
+
+	return ret;
+}
+
+static void
+force_sig_info_fault(int si_signo, int si_code, unsigned long address,
+		     struct task_struct *tsk)
+{
+	siginfo_t info;
+
+	info.si_signo	= si_signo;
+	info.si_errno	= 0;
+	info.si_code	= si_code;
+	info.si_addr	= (void __user *)address;
+
+	force_sig_info(si_signo, &info, tsk);
+}
+
+/*
+ * This is useful to dump out the page tables associated with
+ * 'addr' in mm 'mm'.
+ */
+static void show_pte(struct mm_struct *mm, unsigned long addr)
+{
+	pgd_t *pgd;
+
+	if (mm) {
+		pgd = mm->pgd;
+	} else {
+		pgd = get_TTB();
+
+		if (unlikely(!pgd))
+			pgd = swapper_pg_dir;
+	}
+
+	printk(KERN_ALERT "pgd = %p\n", pgd);
+	pgd += pgd_index(addr);
+	printk(KERN_ALERT "[%08lx] *pgd=%0*Lx", addr,
+	       (u32)(sizeof(*pgd) * 2), (u64)pgd_val(*pgd));
+
+	do {
+		pud_t *pud;
+		pmd_t *pmd;
+		pte_t *pte;
+
+		if (pgd_none(*pgd))
+			break;
+
+		if (pgd_bad(*pgd)) {
+			printk("(bad)");
+			break;
+		}
+
+		pud = pud_offset(pgd, addr);
+		if (PTRS_PER_PUD != 1)
+			printk(", *pud=%0*Lx", (u32)(sizeof(*pud) * 2),
+			       (u64)pud_val(*pud));
+
+		if (pud_none(*pud))
+			break;
+
+		if (pud_bad(*pud)) {
+			printk("(bad)");
+			break;
+		}
+
+		pmd = pmd_offset(pud, addr);
+		if (PTRS_PER_PMD != 1)
+			printk(", *pmd=%0*Lx", (u32)(sizeof(*pmd) * 2),
+			       (u64)pmd_val(*pmd));
+
+		if (pmd_none(*pmd))
+			break;
+
+		if (pmd_bad(*pmd)) {
+			printk("(bad)");
+			break;
+		}
+
+		/* We must not map this if we have highmem enabled */
+		if (PageHighMem(pfn_to_page(pmd_val(*pmd) >> PAGE_SHIFT)))
+			break;
+
+		pte = pte_offset_kernel(pmd, addr);
+		printk(", *pte=%0*Lx", (u32)(sizeof(*pte) * 2),
+		       (u64)pte_val(*pte));
+	} while (0);
+
+	printk("\n");
+}
+
+static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
+{
+	unsigned index = pgd_index(address);
+	pgd_t *pgd_k;
+	pud_t *pud, *pud_k;
+	pmd_t *pmd, *pmd_k;
+
+	pgd += index;
+	pgd_k = init_mm.pgd + index;
+
+	if (!pgd_present(*pgd_k))
+		return NULL;
+
+	pud = pud_offset(pgd, address);
+	pud_k = pud_offset(pgd_k, address);
+	if (!pud_present(*pud_k))
+		return NULL;
+
+	if (!pud_present(*pud))
+	    set_pud(pud, *pud_k);
+
+	pmd = pmd_offset(pud, address);
+	pmd_k = pmd_offset(pud_k, address);
+	if (!pmd_present(*pmd_k))
+		return NULL;
+
+	if (!pmd_present(*pmd))
+		set_pmd(pmd, *pmd_k);
+	else {
+		/*
+		 * The page tables are fully synchronised so there must
+		 * be another reason for the fault. Return NULL here to
+		 * signal that we have not taken care of the fault.
+		 */
+		BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
+		return NULL;
+	}
+
+	return pmd_k;
+}
+
+#ifdef CONFIG_SH_STORE_QUEUES
+#define __FAULT_ADDR_LIMIT	P3_ADDR_MAX
+#else
+#define __FAULT_ADDR_LIMIT	VMALLOC_END
+#endif
+
+/*
+ * Handle a fault on the vmalloc or module mapping area
+ */
+static noinline int vmalloc_fault(unsigned long address)
+{
+	pgd_t *pgd_k;
+	pmd_t *pmd_k;
+	pte_t *pte_k;
+
+	/* Make sure we are in vmalloc/module/P3 area: */
+	if (!(address >= VMALLOC_START && address < __FAULT_ADDR_LIMIT))
+		return -1;
+
+	/*
+	 * Synchronize this task's top level page-table
+	 * with the 'reference' page table.
+	 *
+	 * Do _not_ use "current" here. We might be inside
+	 * an interrupt in the middle of a task switch..
+	 */
+	pgd_k = get_TTB();
+	pmd_k = vmalloc_sync_one(pgd_k, address);
+	if (!pmd_k)
+		return -1;
+
+	pte_k = pte_offset_kernel(pmd_k, address);
+	if (!pte_present(*pte_k))
+		return -1;
+
+	return 0;
+}
+
+static void
+show_fault_oops(struct pt_regs *regs, unsigned long address)
+{
+	if (!oops_may_print())
+		return;
+
+	printk(KERN_ALERT "BUG: unable to handle kernel ");
+	if (address < PAGE_SIZE)
+		printk(KERN_CONT "NULL pointer dereference");
+	else
+		printk(KERN_CONT "paging request");
+
+	printk(KERN_CONT " at %08lx\n", address);
+	printk(KERN_ALERT "PC:");
+	printk_address(regs->pc, 1);
+
+	show_pte(NULL, address);
+}
+
+static noinline void
+no_context(struct pt_regs *regs, unsigned long error_code,
+	   unsigned long address)
+{
+	/* Are we prepared to handle this kernel fault?  */
+	if (fixup_exception(regs))
+		return;
+
+	if (handle_trapped_io(regs, address))
+		return;
+
+	/*
+	 * Oops. The kernel tried to access some bad page. We'll have to
+	 * terminate things with extreme prejudice.
+	 */
+	bust_spinlocks(1);
+
+	show_fault_oops(regs, address);
+
+	die("Oops", regs, error_code);
+	bust_spinlocks(0);
+	do_exit(SIGKILL);
+}
+
+static void
+__bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
+		       unsigned long address, int si_code)
+{
+	struct task_struct *tsk = current;
+
+	/* User mode accesses just cause a SIGSEGV */
+	if (user_mode(regs)) {
+		/*
+		 * It's possible to have interrupts off here:
+		 */
+		local_irq_enable();
+
+		force_sig_info_fault(SIGSEGV, si_code, address, tsk);
+
+		return;
+	}
+
+	no_context(regs, error_code, address);
+}
+
+static noinline void
+bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
+		     unsigned long address)
+{
+	__bad_area_nosemaphore(regs, error_code, address, SEGV_MAPERR);
+}
+
+static void
+__bad_area(struct pt_regs *regs, unsigned long error_code,
+	   unsigned long address, int si_code)
+{
+	struct mm_struct *mm = current->mm;
+
+	/*
+	 * Something tried to access memory that isn't in our memory map..
+	 * Fix it, but check if it's kernel or user first..
+	 */
+	up_read(&mm->mmap_sem);
+
+	__bad_area_nosemaphore(regs, error_code, address, si_code);
+}
+
+static noinline void
+bad_area(struct pt_regs *regs, unsigned long error_code, unsigned long address)
+{
+	__bad_area(regs, error_code, address, SEGV_MAPERR);
+}
+
+static noinline void
+bad_area_access_error(struct pt_regs *regs, unsigned long error_code,
+		      unsigned long address)
+{
+	__bad_area(regs, error_code, address, SEGV_ACCERR);
+}
+
+static void
+do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address)
+{
+	struct task_struct *tsk = current;
+	struct mm_struct *mm = tsk->mm;
+
+	up_read(&mm->mmap_sem);
+
+	/* Kernel mode? Handle exceptions or die: */
+	if (!user_mode(regs))
+		no_context(regs, error_code, address);
+
+	force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
+}
+
+static noinline int
+mm_fault_error(struct pt_regs *regs, unsigned long error_code,
+	       unsigned long address, unsigned int fault)
+{
+	/*
+	 * Pagefault was interrupted by SIGKILL. We have no reason to
+	 * continue pagefault.
+	 */
+	if (fatal_signal_pending(current)) {
+		if (!(fault & VM_FAULT_RETRY))
+			up_read(&current->mm->mmap_sem);
+		if (!user_mode(regs))
+			no_context(regs, error_code, address);
+		return 1;
+	}
+
+	if (!(fault & VM_FAULT_ERROR))
+		return 0;
+
+	if (fault & VM_FAULT_OOM) {
+		/* Kernel mode? Handle exceptions or die: */
+		if (!user_mode(regs)) {
+			up_read(&current->mm->mmap_sem);
+			no_context(regs, error_code, address);
+			return 1;
+		}
+		up_read(&current->mm->mmap_sem);
+
+		/*
+		 * We ran out of memory, call the OOM killer, and return the
+		 * userspace (which will retry the fault, or kill us if we got
+		 * oom-killed):
+		 */
+		pagefault_out_of_memory();
+	} else {
+		if (fault & VM_FAULT_SIGBUS)
+			do_sigbus(regs, error_code, address);
+		else if (fault & VM_FAULT_SIGSEGV)
+			bad_area(regs, error_code, address);
+		else
+			BUG();
+	}
+
+	return 1;
+}
+
+static inline int access_error(int error_code, struct vm_area_struct *vma)
+{
+	if (error_code & FAULT_CODE_WRITE) {
+		/* write, present and write, not present: */
+		if (unlikely(!(vma->vm_flags & VM_WRITE)))
+			return 1;
+		return 0;
+	}
+
+	/* ITLB miss on NX page */
+	if (unlikely((error_code & FAULT_CODE_ITLB) &&
+		     !(vma->vm_flags & VM_EXEC)))
+		return 1;
+
+	/* read, not present: */
+	if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))))
+		return 1;
+
+	return 0;
+}
+
+static int fault_in_kernel_space(unsigned long address)
+{
+	return address >= TASK_SIZE;
+}
+
+/*
+ * This routine handles page faults.  It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ */
+asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
+					unsigned long error_code,
+					unsigned long address)
+{
+	unsigned long vec;
+	struct task_struct *tsk;
+	struct mm_struct *mm;
+	struct vm_area_struct * vma;
+	int fault;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
+
+	tsk = current;
+	mm = tsk->mm;
+	vec = lookup_exception_vector();
+
+	/*
+	 * We fault-in kernel-space virtual memory on-demand. The
+	 * 'reference' page table is init_mm.pgd.
+	 *
+	 * NOTE! We MUST NOT take any locks for this case. We may
+	 * be in an interrupt or a critical region, and should
+	 * only copy the information from the master page table,
+	 * nothing more.
+	 */
+	if (unlikely(fault_in_kernel_space(address))) {
+		if (vmalloc_fault(address) >= 0)
+			return;
+		if (notify_page_fault(regs, vec))
+			return;
+
+		bad_area_nosemaphore(regs, error_code, address);
+		return;
+	}
+
+	if (unlikely(notify_page_fault(regs, vec)))
+		return;
+
+	/* Only enable interrupts if they were on before the fault */
+	if ((regs->sr & SR_IMASK) != SR_IMASK)
+		local_irq_enable();
+
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
+
+	/*
+	 * If we're in an interrupt, have no user context or are running
+	 * with pagefaults disabled then we must not take the fault:
+	 */
+	if (unlikely(faulthandler_disabled() || !mm)) {
+		bad_area_nosemaphore(regs, error_code, address);
+		return;
+	}
+
+retry:
+	down_read(&mm->mmap_sem);
+
+	vma = find_vma(mm, address);
+	if (unlikely(!vma)) {
+		bad_area(regs, error_code, address);
+		return;
+	}
+	if (likely(vma->vm_start <= address))
+		goto good_area;
+	if (unlikely(!(vma->vm_flags & VM_GROWSDOWN))) {
+		bad_area(regs, error_code, address);
+		return;
+	}
+	if (unlikely(expand_stack(vma, address))) {
+		bad_area(regs, error_code, address);
+		return;
+	}
+
+	/*
+	 * Ok, we have a good vm_area for this memory access, so
+	 * we can handle it..
+	 */
+good_area:
+	if (unlikely(access_error(error_code, vma))) {
+		bad_area_access_error(regs, error_code, address);
+		return;
+	}
+
+	set_thread_fault_code(error_code);
+
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
+	if (error_code & FAULT_CODE_WRITE)
+		flags |= FAULT_FLAG_WRITE;
+
+	/*
+	 * If for any reason at all we couldn't handle the fault,
+	 * make sure we exit gracefully rather than endlessly redo
+	 * the fault.
+	 */
+	fault = handle_mm_fault(vma, address, flags);
+
+	if (unlikely(fault & (VM_FAULT_RETRY | VM_FAULT_ERROR)))
+		if (mm_fault_error(regs, error_code, address, fault))
+			return;
+
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+		if (fault & VM_FAULT_MAJOR) {
+			tsk->maj_flt++;
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
+				      regs, address);
+		} else {
+			tsk->min_flt++;
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
+				      regs, address);
+		}
+		if (fault & VM_FAULT_RETRY) {
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+			flags |= FAULT_FLAG_TRIED;
+
+			/*
+			 * No need to up_read(&mm->mmap_sem) as we would
+			 * have already released it in __lock_page_or_retry
+			 * in mm/filemap.c.
+			 */
+			goto retry;
+		}
+	}
+
+	up_read(&mm->mmap_sem);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/flush-sh4.c b/src/kernel/linux/v4.14/arch/sh/mm/flush-sh4.c
new file mode 100644
index 0000000..8b8ef89
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/flush-sh4.c
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+#include <asm/cache_insns.h>
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
+
+/*
+ * Write back the dirty D-caches, but not invalidate them.
+ *
+ * START: Virtual Address (U0, P1, or P3)
+ * SIZE: Size of the region.
+ */
+static void sh4__flush_wback_region(void *start, int size)
+{
+	reg_size_t aligned_start, v, cnt, end;
+
+	aligned_start = register_align(start);
+	v = aligned_start & ~(L1_CACHE_BYTES-1);
+	end = (aligned_start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	cnt = (end - v) / L1_CACHE_BYTES;
+
+	while (cnt >= 8) {
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		cnt -= 8;
+	}
+
+	while (cnt) {
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		cnt--;
+	}
+}
+
+/*
+ * Write back the dirty D-caches and invalidate them.
+ *
+ * START: Virtual Address (U0, P1, or P3)
+ * SIZE: Size of the region.
+ */
+static void sh4__flush_purge_region(void *start, int size)
+{
+	reg_size_t aligned_start, v, cnt, end;
+
+	aligned_start = register_align(start);
+	v = aligned_start & ~(L1_CACHE_BYTES-1);
+	end = (aligned_start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	cnt = (end - v) / L1_CACHE_BYTES;
+
+	while (cnt >= 8) {
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		cnt -= 8;
+	}
+	while (cnt) {
+		__ocbp(v); v += L1_CACHE_BYTES;
+		cnt--;
+	}
+}
+
+/*
+ * No write back please
+ */
+static void sh4__flush_invalidate_region(void *start, int size)
+{
+	reg_size_t aligned_start, v, cnt, end;
+
+	aligned_start = register_align(start);
+	v = aligned_start & ~(L1_CACHE_BYTES-1);
+	end = (aligned_start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	cnt = (end - v) / L1_CACHE_BYTES;
+
+	while (cnt >= 8) {
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		cnt -= 8;
+	}
+
+	while (cnt) {
+		__ocbi(v); v += L1_CACHE_BYTES;
+		cnt--;
+	}
+}
+
+void __init sh4__flush_region_init(void)
+{
+	__flush_wback_region		= sh4__flush_wback_region;
+	__flush_invalidate_region	= sh4__flush_invalidate_region;
+	__flush_purge_region		= sh4__flush_purge_region;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/gup.c b/src/kernel/linux/v4.14/arch/sh/mm/gup.c
new file mode 100644
index 0000000..8045b5b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/gup.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Lockless get_user_pages_fast for SuperH
+ *
+ * Copyright (C) 2009 - 2010  Paul Mundt
+ *
+ * Cloned from the x86 and PowerPC versions, by:
+ *
+ *	Copyright (C) 2008 Nick Piggin
+ *	Copyright (C) 2008 Novell Inc.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/vmstat.h>
+#include <linux/highmem.h>
+#include <asm/pgtable.h>
+
+static inline pte_t gup_get_pte(pte_t *ptep)
+{
+#ifndef CONFIG_X2TLB
+	return READ_ONCE(*ptep);
+#else
+	/*
+	 * With get_user_pages_fast, we walk down the pagetables without
+	 * taking any locks.  For this we would like to load the pointers
+	 * atomically, but that is not possible with 64-bit PTEs.  What
+	 * we do have is the guarantee that a pte will only either go
+	 * from not present to present, or present to not present or both
+	 * -- it will not switch to a completely different present page
+	 * without a TLB flush in between; something that we are blocking
+	 * by holding interrupts off.
+	 *
+	 * Setting ptes from not present to present goes:
+	 * ptep->pte_high = h;
+	 * smp_wmb();
+	 * ptep->pte_low = l;
+	 *
+	 * And present to not present goes:
+	 * ptep->pte_low = 0;
+	 * smp_wmb();
+	 * ptep->pte_high = 0;
+	 *
+	 * We must ensure here that the load of pte_low sees l iff pte_high
+	 * sees h. We load pte_high *after* loading pte_low, which ensures we
+	 * don't see an older value of pte_high.  *Then* we recheck pte_low,
+	 * which ensures that we haven't picked up a changed pte high. We might
+	 * have got rubbish values from pte_low and pte_high, but we are
+	 * guaranteed that pte_low will not have the present bit set *unless*
+	 * it is 'l'. And get_user_pages_fast only operates on present ptes, so
+	 * we're safe.
+	 *
+	 * gup_get_pte should not be used or copied outside gup.c without being
+	 * very careful -- it does not atomically load the pte or anything that
+	 * is likely to be useful for you.
+	 */
+	pte_t pte;
+
+retry:
+	pte.pte_low = ptep->pte_low;
+	smp_rmb();
+	pte.pte_high = ptep->pte_high;
+	smp_rmb();
+	if (unlikely(pte.pte_low != ptep->pte_low))
+		goto retry;
+
+	return pte;
+#endif
+}
+
+/*
+ * The performance critical leaf functions are made noinline otherwise gcc
+ * inlines everything into a single function which results in too much
+ * register pressure.
+ */
+static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	u64 mask, result;
+	pte_t *ptep;
+
+#ifdef CONFIG_X2TLB
+	result = _PAGE_PRESENT | _PAGE_EXT(_PAGE_EXT_KERN_READ | _PAGE_EXT_USER_READ);
+	if (write)
+		result |= _PAGE_EXT(_PAGE_EXT_KERN_WRITE | _PAGE_EXT_USER_WRITE);
+#elif defined(CONFIG_SUPERH64)
+	result = _PAGE_PRESENT | _PAGE_USER | _PAGE_READ;
+	if (write)
+		result |= _PAGE_WRITE;
+#else
+	result = _PAGE_PRESENT | _PAGE_USER;
+	if (write)
+		result |= _PAGE_RW;
+#endif
+
+	mask = result | _PAGE_SPECIAL;
+
+	ptep = pte_offset_map(&pmd, addr);
+	do {
+		pte_t pte = gup_get_pte(ptep);
+		struct page *page;
+
+		if ((pte_val(pte) & mask) != result) {
+			pte_unmap(ptep);
+			return 0;
+		}
+		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+		page = pte_page(pte);
+		get_page(page);
+		__flush_anon_page(page, addr);
+		flush_dcache_page(page);
+		pages[*nr] = page;
+		(*nr)++;
+
+	} while (ptep++, addr += PAGE_SIZE, addr != end);
+	pte_unmap(ptep - 1);
+
+	return 1;
+}
+
+static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
+		int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pmd_t *pmdp;
+
+	pmdp = pmd_offset(&pud, addr);
+	do {
+		pmd_t pmd = *pmdp;
+
+		next = pmd_addr_end(addr, end);
+		if (pmd_none(pmd))
+			return 0;
+		if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+			return 0;
+	} while (pmdp++, addr = next, addr != end);
+
+	return 1;
+}
+
+static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
+			int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pud_t *pudp;
+
+	pudp = pud_offset(&pgd, addr);
+	do {
+		pud_t pud = *pudp;
+
+		next = pud_addr_end(addr, end);
+		if (pud_none(pud))
+			return 0;
+		if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+			return 0;
+	} while (pudp++, addr = next, addr != end);
+
+	return 1;
+}
+
+/*
+ * Like get_user_pages_fast() except its IRQ-safe in that it won't fall
+ * back to the regular GUP.
+ */
+int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			  struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr, len, end;
+	unsigned long next;
+	unsigned long flags;
+	pgd_t *pgdp;
+	int nr = 0;
+
+	start &= PAGE_MASK;
+	addr = start;
+	len = (unsigned long) nr_pages << PAGE_SHIFT;
+	end = start + len;
+	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+					(void __user *)start, len)))
+		return 0;
+
+	/*
+	 * This doesn't prevent pagetable teardown, but does prevent
+	 * the pagetables and pages from being freed.
+	 */
+	local_irq_save(flags);
+	pgdp = pgd_offset(mm, addr);
+	do {
+		pgd_t pgd = *pgdp;
+
+		next = pgd_addr_end(addr, end);
+		if (pgd_none(pgd))
+			break;
+		if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+			break;
+	} while (pgdp++, addr = next, addr != end);
+	local_irq_restore(flags);
+
+	return nr;
+}
+
+/**
+ * get_user_pages_fast() - pin user pages in memory
+ * @start:	starting user address
+ * @nr_pages:	number of pages from start to pin
+ * @write:	whether pages will be written to
+ * @pages:	array that receives pointers to the pages pinned.
+ *		Should be at least nr_pages long.
+ *
+ * Attempt to pin user pages in memory without taking mm->mmap_sem.
+ * If not successful, it will fall back to taking the lock and
+ * calling get_user_pages().
+ *
+ * Returns number of pages pinned. This may be fewer than the number
+ * requested. If nr_pages is 0 or negative, returns 0. If no pages
+ * were pinned, returns -errno.
+ */
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr, len, end;
+	unsigned long next;
+	pgd_t *pgdp;
+	int nr = 0;
+
+	start &= PAGE_MASK;
+	addr = start;
+	len = (unsigned long) nr_pages << PAGE_SHIFT;
+
+	end = start + len;
+	if (end < start)
+		goto slow_irqon;
+
+	local_irq_disable();
+	pgdp = pgd_offset(mm, addr);
+	do {
+		pgd_t pgd = *pgdp;
+
+		next = pgd_addr_end(addr, end);
+		if (pgd_none(pgd))
+			goto slow;
+		if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+			goto slow;
+	} while (pgdp++, addr = next, addr != end);
+	local_irq_enable();
+
+	VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
+	return nr;
+
+	{
+		int ret;
+
+slow:
+		local_irq_enable();
+slow_irqon:
+		/* Try to get the remaining pages with get_user_pages */
+		start += nr << PAGE_SHIFT;
+		pages += nr;
+
+		ret = get_user_pages_unlocked(start,
+			(end - start) >> PAGE_SHIFT, pages,
+			write ? FOLL_WRITE : 0);
+
+		/* Have to be a bit careful with return values */
+		if (nr > 0) {
+			if (ret < 0)
+				ret = nr;
+			else
+				ret += nr;
+		}
+
+		return ret;
+	}
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/hugetlbpage.c b/src/kernel/linux/v4.14/arch/sh/mm/hugetlbpage.c
new file mode 100644
index 0000000..960deb1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/hugetlbpage.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/mm/hugetlbpage.c
+ *
+ * SuperH HugeTLB page support.
+ *
+ * Cloned from sparc64 by Paul Mundt.
+ *
+ * Copyright (C) 2002, 2003 David S. Miller (davem@redhat.com)
+ */
+
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/pagemap.h>
+#include <linux/sysctl.h>
+
+#include <asm/mman.h>
+#include <asm/pgalloc.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
+
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte = NULL;
+
+	pgd = pgd_offset(mm, addr);
+	if (pgd) {
+		pud = pud_alloc(mm, pgd, addr);
+		if (pud) {
+			pmd = pmd_alloc(mm, pud, addr);
+			if (pmd)
+				pte = pte_alloc_map(mm, pmd, addr);
+		}
+	}
+
+	return pte;
+}
+
+pte_t *huge_pte_offset(struct mm_struct *mm,
+		       unsigned long addr, unsigned long sz)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte = NULL;
+
+	pgd = pgd_offset(mm, addr);
+	if (pgd) {
+		pud = pud_offset(pgd, addr);
+		if (pud) {
+			pmd = pmd_offset(pud, addr);
+			if (pmd)
+				pte = pte_offset_map(pmd, addr);
+		}
+	}
+
+	return pte;
+}
+
+int pmd_huge(pmd_t pmd)
+{
+	return 0;
+}
+
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/init.c b/src/kernel/linux/v4.14/arch/sh/mm/init.c
new file mode 100644
index 0000000..bf726af
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/init.c
@@ -0,0 +1,529 @@
+/*
+ * linux/arch/sh/mm/init.c
+ *
+ *  Copyright (C) 1999  Niibe Yutaka
+ *  Copyright (C) 2002 - 2011  Paul Mundt
+ *
+ *  Based on linux/arch/i386/mm/init.c:
+ *   Copyright (C) 1995  Linus Torvalds
+ */
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/init.h>
+#include <linux/gfp.h>
+#include <linux/bootmem.h>
+#include <linux/proc_fs.h>
+#include <linux/pagemap.h>
+#include <linux/percpu.h>
+#include <linux/io.h>
+#include <linux/memblock.h>
+#include <linux/dma-mapping.h>
+#include <linux/export.h>
+#include <asm/mmu_context.h>
+#include <asm/mmzone.h>
+#include <asm/kexec.h>
+#include <asm/tlb.h>
+#include <asm/cacheflush.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/cache.h>
+#include <asm/sizes.h>
+
+pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+void __init generic_mem_init(void)
+{
+	memblock_add(__MEMORY_START, __MEMORY_SIZE);
+}
+
+void __init __weak plat_mem_setup(void)
+{
+	/* Nothing to see here, move along. */
+}
+
+#ifdef CONFIG_MMU
+static pte_t *__get_pte_phys(unsigned long addr)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+
+	pgd = pgd_offset_k(addr);
+	if (pgd_none(*pgd)) {
+		pgd_ERROR(*pgd);
+		return NULL;
+	}
+
+	pud = pud_alloc(NULL, pgd, addr);
+	if (unlikely(!pud)) {
+		pud_ERROR(*pud);
+		return NULL;
+	}
+
+	pmd = pmd_alloc(NULL, pud, addr);
+	if (unlikely(!pmd)) {
+		pmd_ERROR(*pmd);
+		return NULL;
+	}
+
+	return pte_offset_kernel(pmd, addr);
+}
+
+static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
+{
+	pte_t *pte;
+
+	pte = __get_pte_phys(addr);
+	if (!pte_none(*pte)) {
+		pte_ERROR(*pte);
+		return;
+	}
+
+	set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot));
+	local_flush_tlb_one(get_asid(), addr);
+
+	if (pgprot_val(prot) & _PAGE_WIRED)
+		tlb_wire_entry(NULL, addr, *pte);
+}
+
+static void clear_pte_phys(unsigned long addr, pgprot_t prot)
+{
+	pte_t *pte;
+
+	pte = __get_pte_phys(addr);
+
+	if (pgprot_val(prot) & _PAGE_WIRED)
+		tlb_unwire_entry();
+
+	set_pte(pte, pfn_pte(0, __pgprot(0)));
+	local_flush_tlb_one(get_asid(), addr);
+}
+
+void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
+{
+	unsigned long address = __fix_to_virt(idx);
+
+	if (idx >= __end_of_fixed_addresses) {
+		BUG();
+		return;
+	}
+
+	set_pte_phys(address, phys, prot);
+}
+
+void __clear_fixmap(enum fixed_addresses idx, pgprot_t prot)
+{
+	unsigned long address = __fix_to_virt(idx);
+
+	if (idx >= __end_of_fixed_addresses) {
+		BUG();
+		return;
+	}
+
+	clear_pte_phys(address, prot);
+}
+
+static pmd_t * __init one_md_table_init(pud_t *pud)
+{
+	if (pud_none(*pud)) {
+		pmd_t *pmd;
+
+		pmd = alloc_bootmem_pages(PAGE_SIZE);
+		pud_populate(&init_mm, pud, pmd);
+		BUG_ON(pmd != pmd_offset(pud, 0));
+	}
+
+	return pmd_offset(pud, 0);
+}
+
+static pte_t * __init one_page_table_init(pmd_t *pmd)
+{
+	if (pmd_none(*pmd)) {
+		pte_t *pte;
+
+		pte = alloc_bootmem_pages(PAGE_SIZE);
+		pmd_populate_kernel(&init_mm, pmd, pte);
+		BUG_ON(pte != pte_offset_kernel(pmd, 0));
+	}
+
+	return pte_offset_kernel(pmd, 0);
+}
+
+static pte_t * __init page_table_kmap_check(pte_t *pte, pmd_t *pmd,
+					    unsigned long vaddr, pte_t *lastpte)
+{
+	return pte;
+}
+
+void __init page_table_range_init(unsigned long start, unsigned long end,
+					 pgd_t *pgd_base)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte = NULL;
+	int i, j, k;
+	unsigned long vaddr;
+
+	vaddr = start;
+	i = __pgd_offset(vaddr);
+	j = __pud_offset(vaddr);
+	k = __pmd_offset(vaddr);
+	pgd = pgd_base + i;
+
+	for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
+		pud = (pud_t *)pgd;
+		for ( ; (j < PTRS_PER_PUD) && (vaddr != end); pud++, j++) {
+			pmd = one_md_table_init(pud);
+#ifndef __PAGETABLE_PMD_FOLDED
+			pmd += k;
+#endif
+			for (; (k < PTRS_PER_PMD) && (vaddr != end); pmd++, k++) {
+				pte = page_table_kmap_check(one_page_table_init(pmd),
+							    pmd, vaddr, pte);
+				vaddr += PMD_SIZE;
+			}
+			k = 0;
+		}
+		j = 0;
+	}
+}
+#endif	/* CONFIG_MMU */
+
+void __init allocate_pgdat(unsigned int nid)
+{
+	unsigned long start_pfn, end_pfn;
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+	unsigned long phys;
+#endif
+
+	get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+	phys = __memblock_alloc_base(sizeof(struct pglist_data),
+				SMP_CACHE_BYTES, end_pfn << PAGE_SHIFT);
+	/* Retry with all of system memory */
+	if (!phys)
+		phys = __memblock_alloc_base(sizeof(struct pglist_data),
+					SMP_CACHE_BYTES, memblock_end_of_DRAM());
+	if (!phys)
+		panic("Can't allocate pgdat for node %d\n", nid);
+
+	NODE_DATA(nid) = __va(phys);
+	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+
+	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
+#endif
+
+	NODE_DATA(nid)->node_start_pfn = start_pfn;
+	NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
+}
+
+static void __init bootmem_init_one_node(unsigned int nid)
+{
+	unsigned long total_pages, paddr;
+	unsigned long end_pfn;
+	struct pglist_data *p;
+
+	p = NODE_DATA(nid);
+
+	/* Nothing to do.. */
+	if (!p->node_spanned_pages)
+		return;
+
+	end_pfn = pgdat_end_pfn(p);
+
+	total_pages = bootmem_bootmap_pages(p->node_spanned_pages);
+
+	paddr = memblock_alloc(total_pages << PAGE_SHIFT, PAGE_SIZE);
+	if (!paddr)
+		panic("Can't allocate bootmap for nid[%d]\n", nid);
+
+	init_bootmem_node(p, paddr >> PAGE_SHIFT, p->node_start_pfn, end_pfn);
+
+	free_bootmem_with_active_regions(nid, end_pfn);
+
+	/*
+	 * XXX Handle initial reservations for the system memory node
+	 * only for the moment, we'll refactor this later for handling
+	 * reservations in other nodes.
+	 */
+	if (nid == 0) {
+		struct memblock_region *reg;
+
+		/* Reserve the sections we're already using. */
+		for_each_memblock(reserved, reg) {
+			reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
+		}
+	}
+
+	sparse_memory_present_with_active_regions(nid);
+}
+
+static void __init do_init_bootmem(void)
+{
+	struct memblock_region *reg;
+	int i;
+
+	/* Add active regions with valid PFNs. */
+	for_each_memblock(memory, reg) {
+		unsigned long start_pfn, end_pfn;
+		start_pfn = memblock_region_memory_base_pfn(reg);
+		end_pfn = memblock_region_memory_end_pfn(reg);
+		__add_active_range(0, start_pfn, end_pfn);
+	}
+
+	/* All of system RAM sits in node 0 for the non-NUMA case */
+	allocate_pgdat(0);
+	node_set_online(0);
+
+	plat_mem_setup();
+
+	for_each_online_node(i)
+		bootmem_init_one_node(i);
+
+	sparse_init();
+}
+
+static void __init early_reserve_mem(void)
+{
+	unsigned long start_pfn;
+	u32 zero_base = (u32)__MEMORY_START + (u32)PHYSICAL_OFFSET;
+	u32 start = zero_base + (u32)CONFIG_ZERO_PAGE_OFFSET;
+
+	/*
+	 * Partially used pages are not usable - thus
+	 * we are rounding upwards:
+	 */
+	start_pfn = PFN_UP(__pa(_end));
+
+	/*
+	 * Reserve the kernel text and Reserve the bootmem bitmap. We do
+	 * this in two steps (first step was init_bootmem()), because
+	 * this catches the (definitely buggy) case of us accidentally
+	 * initializing the bootmem allocator with an invalid RAM area.
+	 */
+	memblock_reserve(start, (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) - start);
+
+	/*
+	 * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
+	 */
+	if (CONFIG_ZERO_PAGE_OFFSET != 0)
+		memblock_reserve(zero_base, CONFIG_ZERO_PAGE_OFFSET);
+
+	/*
+	 * Handle additional early reservations
+	 */
+	check_for_initrd();
+	reserve_crashkernel();
+}
+
+void __init paging_init(void)
+{
+	unsigned long max_zone_pfns[MAX_NR_ZONES];
+	unsigned long vaddr, end;
+	int nid;
+
+	sh_mv.mv_mem_init();
+
+	early_reserve_mem();
+
+	/*
+	 * Once the early reservations are out of the way, give the
+	 * platforms a chance to kick out some memory.
+	 */
+	if (sh_mv.mv_mem_reserve)
+		sh_mv.mv_mem_reserve();
+
+	memblock_enforce_memory_limit(memory_limit);
+	memblock_allow_resize();
+
+	memblock_dump_all();
+
+	/*
+	 * Determine low and high memory ranges:
+	 */
+	max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
+	min_low_pfn = __MEMORY_START >> PAGE_SHIFT;
+
+	nodes_clear(node_online_map);
+
+	memory_start = (unsigned long)__va(__MEMORY_START);
+	memory_end = memory_start + (memory_limit ?: memblock_phys_mem_size());
+
+	uncached_init();
+	pmb_init();
+	do_init_bootmem();
+	ioremap_fixed_init();
+
+	/* We don't need to map the kernel through the TLB, as
+	 * it is permanatly mapped using P1. So clear the
+	 * entire pgd. */
+	memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
+
+	/* Set an initial value for the MMU.TTB so we don't have to
+	 * check for a null value. */
+	set_TTB(swapper_pg_dir);
+
+	/*
+	 * Populate the relevant portions of swapper_pg_dir so that
+	 * we can use the fixmap entries without calling kmalloc.
+	 * pte's will be filled in by __set_fixmap().
+	 */
+	vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
+	end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK;
+	page_table_range_init(vaddr, end, swapper_pg_dir);
+
+	kmap_coherent_init();
+
+	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+
+	for_each_online_node(nid) {
+		pg_data_t *pgdat = NODE_DATA(nid);
+		unsigned long low, start_pfn;
+
+		start_pfn = pgdat->bdata->node_min_pfn;
+		low = pgdat->bdata->node_low_pfn;
+
+		if (max_zone_pfns[ZONE_NORMAL] < low)
+			max_zone_pfns[ZONE_NORMAL] = low;
+
+		printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n",
+		       nid, start_pfn, low);
+	}
+
+	free_area_init_nodes(max_zone_pfns);
+}
+
+/*
+ * Early initialization for any I/O MMUs we might have.
+ */
+static void __init iommu_init(void)
+{
+	no_iommu_init();
+}
+
+unsigned int mem_init_done = 0;
+
+void __init mem_init(void)
+{
+	pg_data_t *pgdat;
+
+	iommu_init();
+
+	high_memory = NULL;
+	for_each_online_pgdat(pgdat)
+		high_memory = max_t(void *, high_memory,
+				    __va(pgdat_end_pfn(pgdat) << PAGE_SHIFT));
+
+	free_all_bootmem();
+
+	/* Set this up early, so we can take care of the zero page */
+	cpu_cache_init();
+
+	/* clear the zero-page */
+	memset(empty_zero_page, 0, PAGE_SIZE);
+	__flush_wback_region(empty_zero_page, PAGE_SIZE);
+
+	vsyscall_init();
+
+	mem_init_print_info(NULL);
+	pr_info("virtual kernel memory layout:\n"
+		"    fixmap  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+#ifdef CONFIG_HIGHMEM
+		"    pkmap   : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+#endif
+		"    vmalloc : 0x%08lx - 0x%08lx   (%4ld MB)\n"
+		"    lowmem  : 0x%08lx - 0x%08lx   (%4ld MB) (cached)\n"
+#ifdef CONFIG_UNCACHED_MAPPING
+		"            : 0x%08lx - 0x%08lx   (%4ld MB) (uncached)\n"
+#endif
+		"      .init : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+		"      .data : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+		"      .text : 0x%08lx - 0x%08lx   (%4ld kB)\n",
+		FIXADDR_START, FIXADDR_TOP,
+		(FIXADDR_TOP - FIXADDR_START) >> 10,
+
+#ifdef CONFIG_HIGHMEM
+		PKMAP_BASE, PKMAP_BASE+LAST_PKMAP*PAGE_SIZE,
+		(LAST_PKMAP*PAGE_SIZE) >> 10,
+#endif
+
+		(unsigned long)VMALLOC_START, VMALLOC_END,
+		(VMALLOC_END - VMALLOC_START) >> 20,
+
+		(unsigned long)memory_start, (unsigned long)high_memory,
+		((unsigned long)high_memory - (unsigned long)memory_start) >> 20,
+
+#ifdef CONFIG_UNCACHED_MAPPING
+		uncached_start, uncached_end, uncached_size >> 20,
+#endif
+
+		(unsigned long)&__init_begin, (unsigned long)&__init_end,
+		((unsigned long)&__init_end -
+		 (unsigned long)&__init_begin) >> 10,
+
+		(unsigned long)&_etext, (unsigned long)&_edata,
+		((unsigned long)&_edata - (unsigned long)&_etext) >> 10,
+
+		(unsigned long)&_text, (unsigned long)&_etext,
+		((unsigned long)&_etext - (unsigned long)&_text) >> 10);
+
+	mem_init_done = 1;
+}
+
+void free_initmem(void)
+{
+	free_initmem_default(-1);
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+	free_reserved_area((void *)start, (void *)end, -1, "initrd");
+}
+#endif
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+int arch_add_memory(int nid, u64 start, u64 size, bool want_memblock)
+{
+	unsigned long start_pfn = PFN_DOWN(start);
+	unsigned long nr_pages = size >> PAGE_SHIFT;
+	int ret;
+
+	/* We only have ZONE_NORMAL, so this is easy.. */
+	ret = __add_pages(nid, start_pfn, nr_pages, want_memblock);
+	if (unlikely(ret))
+		printk("%s: Failed, __add_pages() == %d\n", __func__, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(arch_add_memory);
+
+#ifdef CONFIG_NUMA
+int memory_add_physaddr_to_nid(u64 addr)
+{
+	/* Node 0 for now.. */
+	return 0;
+}
+EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
+#endif
+
+#ifdef CONFIG_MEMORY_HOTREMOVE
+int arch_remove_memory(u64 start, u64 size)
+{
+	unsigned long start_pfn = PFN_DOWN(start);
+	unsigned long nr_pages = size >> PAGE_SHIFT;
+	struct zone *zone;
+	int ret;
+
+	zone = page_zone(pfn_to_page(start_pfn));
+	ret = __remove_pages(zone, start_pfn, nr_pages);
+	if (unlikely(ret))
+		pr_warn("%s: Failed, __remove_pages() == %d\n", __func__,
+			ret);
+
+	return ret;
+}
+#endif
+#endif /* CONFIG_MEMORY_HOTPLUG */
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/ioremap.c b/src/kernel/linux/v4.14/arch/sh/mm/ioremap.c
new file mode 100644
index 0000000..d09ddfe
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/ioremap.c
@@ -0,0 +1,137 @@
+/*
+ * arch/sh/mm/ioremap.c
+ *
+ * (C) Copyright 1995 1996 Linus Torvalds
+ * (C) Copyright 2005 - 2010  Paul Mundt
+ *
+ * Re-map IO memory to kernel address space so that we can access it.
+ * This is needed for high PCI addresses that aren't mapped in the
+ * 640k-1MB IO memory area on PC's
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ */
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/addrspace.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu.h>
+
+/*
+ * Remap an arbitrary physical address space into the kernel virtual
+ * address space. Needed when the kernel wants to access high addresses
+ * directly.
+ *
+ * NOTE! We need to allow non-page-aligned mappings too: we will obviously
+ * have to convert them into an offset in a page-aligned mapping, but the
+ * caller shouldn't need to know that small detail.
+ */
+void __iomem * __ref
+__ioremap_caller(phys_addr_t phys_addr, unsigned long size,
+		 pgprot_t pgprot, void *caller)
+{
+	struct vm_struct *area;
+	unsigned long offset, last_addr, addr, orig_addr;
+	void __iomem *mapped;
+
+	/* Don't allow wraparound or zero size */
+	last_addr = phys_addr + size - 1;
+	if (!size || last_addr < phys_addr)
+		return NULL;
+
+	/*
+	 * If we can't yet use the regular approach, go the fixmap route.
+	 */
+	if (!mem_init_done)
+		return ioremap_fixed(phys_addr, size, pgprot);
+
+	/*
+	 * First try to remap through the PMB.
+	 * PMB entries are all pre-faulted.
+	 */
+	mapped = pmb_remap_caller(phys_addr, size, pgprot, caller);
+	if (mapped && !IS_ERR(mapped))
+		return mapped;
+
+	/*
+	 * Mappings have to be page-aligned
+	 */
+	offset = phys_addr & ~PAGE_MASK;
+	phys_addr &= PAGE_MASK;
+	size = PAGE_ALIGN(last_addr+1) - phys_addr;
+
+	/*
+	 * Ok, go for it..
+	 */
+	area = get_vm_area_caller(size, VM_IOREMAP, caller);
+	if (!area)
+		return NULL;
+	area->phys_addr = phys_addr;
+	orig_addr = addr = (unsigned long)area->addr;
+
+	if (ioremap_page_range(addr, addr + size, phys_addr, pgprot)) {
+		vunmap((void *)orig_addr);
+		return NULL;
+	}
+
+	return (void __iomem *)(offset + (char *)orig_addr);
+}
+EXPORT_SYMBOL(__ioremap_caller);
+
+/*
+ * Simple checks for non-translatable mappings.
+ */
+static inline int iomapping_nontranslatable(unsigned long offset)
+{
+#ifdef CONFIG_29BIT
+	/*
+	 * In 29-bit mode this includes the fixed P1/P2 areas, as well as
+	 * parts of P3.
+	 */
+	if (PXSEG(offset) < P3SEG || offset >= P3_ADDR_MAX)
+		return 1;
+#endif
+
+	return 0;
+}
+
+void __iounmap(void __iomem *addr)
+{
+	unsigned long vaddr = (unsigned long __force)addr;
+	struct vm_struct *p;
+
+	/*
+	 * Nothing to do if there is no translatable mapping.
+	 */
+	if (iomapping_nontranslatable(vaddr))
+		return;
+
+	/*
+	 * There's no VMA if it's from an early fixed mapping.
+	 */
+	if (iounmap_fixed(addr) == 0)
+		return;
+
+	/*
+	 * If the PMB handled it, there's nothing else to do.
+	 */
+	if (pmb_unmap(addr) == 0)
+		return;
+
+	p = remove_vm_area((void *)(vaddr & PAGE_MASK));
+	if (!p) {
+		printk(KERN_ERR "%s: bad address %p\n", __func__, addr);
+		return;
+	}
+
+	kfree(p);
+}
+EXPORT_SYMBOL(__iounmap);
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/ioremap_fixed.c b/src/kernel/linux/v4.14/arch/sh/mm/ioremap_fixed.c
new file mode 100644
index 0000000..927a129
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/ioremap_fixed.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Re-map IO memory to kernel address space so that we can access it.
+ *
+ * These functions should only be used when it is necessary to map a
+ * physical address space into the kernel address space before ioremap()
+ * can be used, e.g. early in boot before paging_init().
+ *
+ * Copyright (C) 2009  Matt Fleming
+ */
+
+#include <linux/vmalloc.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/bootmem.h>
+#include <linux/proc_fs.h>
+#include <asm/fixmap.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/addrspace.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu.h>
+#include <asm/mmu_context.h>
+
+struct ioremap_map {
+	void __iomem *addr;
+	unsigned long size;
+	unsigned long fixmap_addr;
+};
+
+static struct ioremap_map ioremap_maps[FIX_N_IOREMAPS];
+
+void __init ioremap_fixed_init(void)
+{
+	struct ioremap_map *map;
+	int i;
+
+	for (i = 0; i < FIX_N_IOREMAPS; i++) {
+		map = &ioremap_maps[i];
+		map->fixmap_addr = __fix_to_virt(FIX_IOREMAP_BEGIN + i);
+	}
+}
+
+void __init __iomem *
+ioremap_fixed(phys_addr_t phys_addr, unsigned long size, pgprot_t prot)
+{
+	enum fixed_addresses idx0, idx;
+	struct ioremap_map *map;
+	unsigned int nrpages;
+	unsigned long offset;
+	int i, slot;
+
+	/*
+	 * Mappings have to be page-aligned
+	 */
+	offset = phys_addr & ~PAGE_MASK;
+	phys_addr &= PAGE_MASK;
+	size = PAGE_ALIGN(phys_addr + size) - phys_addr;
+
+	slot = -1;
+	for (i = 0; i < FIX_N_IOREMAPS; i++) {
+		map = &ioremap_maps[i];
+		if (!map->addr) {
+			map->size = size;
+			slot = i;
+			break;
+		}
+	}
+
+	if (slot < 0)
+		return NULL;
+
+	/*
+	 * Mappings have to fit in the FIX_IOREMAP area.
+	 */
+	nrpages = size >> PAGE_SHIFT;
+	if (nrpages > FIX_N_IOREMAPS)
+		return NULL;
+
+	/*
+	 * Ok, go for it..
+	 */
+	idx0 = FIX_IOREMAP_BEGIN + slot;
+	idx = idx0;
+	while (nrpages > 0) {
+		pgprot_val(prot) |= _PAGE_WIRED;
+		__set_fixmap(idx, phys_addr, prot);
+		phys_addr += PAGE_SIZE;
+		idx++;
+		--nrpages;
+	}
+
+	map->addr = (void __iomem *)(offset + map->fixmap_addr);
+	return map->addr;
+}
+
+int iounmap_fixed(void __iomem *addr)
+{
+	enum fixed_addresses idx;
+	struct ioremap_map *map;
+	unsigned int nrpages;
+	int i, slot;
+
+	slot = -1;
+	for (i = 0; i < FIX_N_IOREMAPS; i++) {
+		map = &ioremap_maps[i];
+		if (map->addr == addr) {
+			slot = i;
+			break;
+		}
+	}
+
+	/*
+	 * If we don't match, it's not for us.
+	 */
+	if (slot < 0)
+		return -EINVAL;
+
+	nrpages = map->size >> PAGE_SHIFT;
+
+	idx = FIX_IOREMAP_BEGIN + slot + nrpages - 1;
+	while (nrpages > 0) {
+		__clear_fixmap(idx, __pgprot(_PAGE_WIRED));
+		--idx;
+		--nrpages;
+	}
+
+	map->size = 0;
+	map->addr = NULL;
+
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/kmap.c b/src/kernel/linux/v4.14/arch/sh/mm/kmap.c
new file mode 100644
index 0000000..bf25d7c
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/kmap.c
@@ -0,0 +1,69 @@
+/*
+ * arch/sh/mm/kmap.c
+ *
+ * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
+ * Copyright (C) 2002 - 2009  Paul Mundt
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/fs.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+#define kmap_get_fixmap_pte(vaddr)                                     \
+	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
+
+static pte_t *kmap_coherent_pte;
+
+void __init kmap_coherent_init(void)
+{
+	unsigned long vaddr;
+
+	/* cache the first coherent kmap pte */
+	vaddr = __fix_to_virt(FIX_CMAP_BEGIN);
+	kmap_coherent_pte = kmap_get_fixmap_pte(vaddr);
+}
+
+void *kmap_coherent(struct page *page, unsigned long addr)
+{
+	enum fixed_addresses idx;
+	unsigned long vaddr;
+
+	BUG_ON(!test_bit(PG_dcache_clean, &page->flags));
+
+	preempt_disable();
+	pagefault_disable();
+
+	idx = FIX_CMAP_END -
+		(((addr >> PAGE_SHIFT) & (FIX_N_COLOURS - 1)) +
+		 (FIX_N_COLOURS * smp_processor_id()));
+
+	vaddr = __fix_to_virt(idx);
+
+	BUG_ON(!pte_none(*(kmap_coherent_pte - idx)));
+	set_pte(kmap_coherent_pte - idx, mk_pte(page, PAGE_KERNEL));
+
+	return (void *)vaddr;
+}
+
+void kunmap_coherent(void *kvaddr)
+{
+	if (kvaddr >= (void *)FIXADDR_START) {
+		unsigned long vaddr = (unsigned long)kvaddr & PAGE_MASK;
+		enum fixed_addresses idx = __virt_to_fix(vaddr);
+
+		/* XXX.. Kill this later, here for sanity at the moment.. */
+		__flush_purge_region((void *)vaddr, PAGE_SIZE);
+
+		pte_clear(&init_mm, vaddr, kmap_coherent_pte - idx);
+		local_flush_tlb_one(get_asid(), vaddr);
+	}
+
+	pagefault_enable();
+	preempt_enable();
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/mmap.c b/src/kernel/linux/v4.14/arch/sh/mm/mmap.c
new file mode 100644
index 0000000..6a1a129
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/mmap.c
@@ -0,0 +1,164 @@
+/*
+ * arch/sh/mm/mmap.c
+ *
+ * Copyright (C) 2008 - 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/sched/mm.h>
+#include <linux/mman.h>
+#include <linux/module.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+
+unsigned long shm_align_mask = PAGE_SIZE - 1;	/* Sane caches */
+EXPORT_SYMBOL(shm_align_mask);
+
+#ifdef CONFIG_MMU
+/*
+ * To avoid cache aliases, we map the shared page with same color.
+ */
+static inline unsigned long COLOUR_ALIGN(unsigned long addr,
+					 unsigned long pgoff)
+{
+	unsigned long base = (addr + shm_align_mask) & ~shm_align_mask;
+	unsigned long off = (pgoff << PAGE_SHIFT) & shm_align_mask;
+
+	return base + off;
+}
+
+unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
+	unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	int do_colour_align;
+	struct vm_unmapped_area_info info;
+
+	if (flags & MAP_FIXED) {
+		/* We do not accept a shared mapping if it would violate
+		 * cache aliasing constraints.
+		 */
+		if ((flags & MAP_SHARED) &&
+		    ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
+			return -EINVAL;
+		return addr;
+	}
+
+	if (unlikely(len > TASK_SIZE))
+		return -ENOMEM;
+
+	do_colour_align = 0;
+	if (filp || (flags & MAP_SHARED))
+		do_colour_align = 1;
+
+	if (addr) {
+		if (do_colour_align)
+			addr = COLOUR_ALIGN(addr, pgoff);
+		else
+			addr = PAGE_ALIGN(addr);
+
+		vma = find_vma(mm, addr);
+		if (TASK_SIZE - len >= addr &&
+		    (!vma || addr + len <= vm_start_gap(vma)))
+			return addr;
+	}
+
+	info.flags = 0;
+	info.length = len;
+	info.low_limit = TASK_UNMAPPED_BASE;
+	info.high_limit = TASK_SIZE;
+	info.align_mask = do_colour_align ? (PAGE_MASK & shm_align_mask) : 0;
+	info.align_offset = pgoff << PAGE_SHIFT;
+	return vm_unmapped_area(&info);
+}
+
+unsigned long
+arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
+			  const unsigned long len, const unsigned long pgoff,
+			  const unsigned long flags)
+{
+	struct vm_area_struct *vma;
+	struct mm_struct *mm = current->mm;
+	unsigned long addr = addr0;
+	int do_colour_align;
+	struct vm_unmapped_area_info info;
+
+	if (flags & MAP_FIXED) {
+		/* We do not accept a shared mapping if it would violate
+		 * cache aliasing constraints.
+		 */
+		if ((flags & MAP_SHARED) &&
+		    ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
+			return -EINVAL;
+		return addr;
+	}
+
+	if (unlikely(len > TASK_SIZE))
+		return -ENOMEM;
+
+	do_colour_align = 0;
+	if (filp || (flags & MAP_SHARED))
+		do_colour_align = 1;
+
+	/* requesting a specific address */
+	if (addr) {
+		if (do_colour_align)
+			addr = COLOUR_ALIGN(addr, pgoff);
+		else
+			addr = PAGE_ALIGN(addr);
+
+		vma = find_vma(mm, addr);
+		if (TASK_SIZE - len >= addr &&
+		    (!vma || addr + len <= vm_start_gap(vma)))
+			return addr;
+	}
+
+	info.flags = VM_UNMAPPED_AREA_TOPDOWN;
+	info.length = len;
+	info.low_limit = PAGE_SIZE;
+	info.high_limit = mm->mmap_base;
+	info.align_mask = do_colour_align ? (PAGE_MASK & shm_align_mask) : 0;
+	info.align_offset = pgoff << PAGE_SHIFT;
+	addr = vm_unmapped_area(&info);
+
+	/*
+	 * A failed mmap() very likely causes application failure,
+	 * so fall back to the bottom-up function here. This scenario
+	 * can happen with large stack limits and large mmap()
+	 * allocations.
+	 */
+	if (addr & ~PAGE_MASK) {
+		VM_BUG_ON(addr != -ENOMEM);
+		info.flags = 0;
+		info.low_limit = TASK_UNMAPPED_BASE;
+		info.high_limit = TASK_SIZE;
+		addr = vm_unmapped_area(&info);
+	}
+
+	return addr;
+}
+#endif /* CONFIG_MMU */
+
+/*
+ * You really shouldn't be using read() or write() on /dev/mem.  This
+ * might go away in the future.
+ */
+int valid_phys_addr_range(phys_addr_t addr, size_t count)
+{
+	if (addr < __MEMORY_START)
+		return 0;
+	if (addr + count > __pa(high_memory))
+		return 0;
+
+	return 1;
+}
+
+int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
+{
+	return 1;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/nommu.c b/src/kernel/linux/v4.14/arch/sh/mm/nommu.c
new file mode 100644
index 0000000..82f8197
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/nommu.c
@@ -0,0 +1,104 @@
+/*
+ * arch/sh/mm/nommu.c
+ *
+ * Various helper routines and stubs for MMUless SH.
+ *
+ * Copyright (C) 2002 - 2009 Paul Mundt
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+#include <linux/uaccess.h>
+
+/*
+ * Nothing too terribly exciting here ..
+ */
+void copy_page(void *to, void *from)
+{
+	memcpy(to, from, PAGE_SIZE);
+}
+
+__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n)
+{
+	memcpy(to, from, n);
+	return 0;
+}
+
+__kernel_size_t __clear_user(void *to, __kernel_size_t n)
+{
+	memset(to, 0, n);
+	return 0;
+}
+
+void local_flush_tlb_all(void)
+{
+	BUG();
+}
+
+void local_flush_tlb_mm(struct mm_struct *mm)
+{
+	BUG();
+}
+
+void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			    unsigned long end)
+{
+	BUG();
+}
+
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+	BUG();
+}
+
+void local_flush_tlb_one(unsigned long asid, unsigned long page)
+{
+	BUG();
+}
+
+void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	BUG();
+}
+
+void __flush_tlb_global(void)
+{
+}
+
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+}
+
+void __init kmap_coherent_init(void)
+{
+}
+
+void *kmap_coherent(struct page *page, unsigned long addr)
+{
+	BUG();
+	return NULL;
+}
+
+void kunmap_coherent(void *kvaddr)
+{
+	BUG();
+}
+
+void __init page_table_range_init(unsigned long start, unsigned long end,
+				  pgd_t *pgd_base)
+{
+}
+
+void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
+{
+}
+
+void pgtable_cache_init(void)
+{
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/numa.c b/src/kernel/linux/v4.14/arch/sh/mm/numa.c
new file mode 100644
index 0000000..05713d1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/numa.c
@@ -0,0 +1,75 @@
+/*
+ * arch/sh/mm/numa.c - Multiple node support for SH machines
+ *
+ *  Copyright (C) 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/bootmem.h>
+#include <linux/memblock.h>
+#include <linux/mm.h>
+#include <linux/numa.h>
+#include <linux/pfn.h>
+#include <asm/sections.h>
+
+struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
+EXPORT_SYMBOL_GPL(node_data);
+
+/*
+ * On SH machines the conventional approach is to stash system RAM
+ * in node 0, and other memory blocks in to node 1 and up, ordered by
+ * latency. Each node's pgdat is node-local at the beginning of the node,
+ * immediately followed by the node mem map.
+ */
+void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
+{
+	unsigned long bootmap_pages;
+	unsigned long start_pfn, end_pfn;
+	unsigned long bootmem_paddr;
+
+	/* Don't allow bogus node assignment */
+	BUG_ON(nid >= MAX_NUMNODES || nid <= 0);
+
+	start_pfn = PFN_DOWN(start);
+	end_pfn = PFN_DOWN(end);
+
+	pmb_bolt_mapping((unsigned long)__va(start), start, end - start,
+			 PAGE_KERNEL);
+
+	memblock_add(start, end - start);
+
+	__add_active_range(nid, start_pfn, end_pfn);
+
+	/* Node-local pgdat */
+	NODE_DATA(nid) = __va(memblock_alloc_base(sizeof(struct pglist_data),
+					     SMP_CACHE_BYTES, end));
+	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+
+	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
+	NODE_DATA(nid)->node_start_pfn = start_pfn;
+	NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
+
+	/* Node-local bootmap */
+	bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
+	bootmem_paddr = memblock_alloc_base(bootmap_pages << PAGE_SHIFT,
+				       PAGE_SIZE, end);
+	init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT,
+			  start_pfn, end_pfn);
+
+	free_bootmem_with_active_regions(nid, end_pfn);
+
+	/* Reserve the pgdat and bootmap space with the bootmem allocator */
+	reserve_bootmem_node(NODE_DATA(nid), start_pfn << PAGE_SHIFT,
+			     sizeof(struct pglist_data), BOOTMEM_DEFAULT);
+	reserve_bootmem_node(NODE_DATA(nid), bootmem_paddr,
+			     bootmap_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
+
+	/* It's up */
+	node_set_online(nid);
+
+	/* Kick sparsemem */
+	sparse_memory_present_with_active_regions(nid);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/pgtable.c b/src/kernel/linux/v4.14/arch/sh/mm/pgtable.c
new file mode 100644
index 0000000..5c8f924
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/pgtable.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/mm.h>
+#include <linux/slab.h>
+
+#define PGALLOC_GFP GFP_KERNEL | __GFP_ZERO
+
+static struct kmem_cache *pgd_cachep;
+#if PAGETABLE_LEVELS > 2
+static struct kmem_cache *pmd_cachep;
+#endif
+
+void pgd_ctor(void *x)
+{
+	pgd_t *pgd = x;
+
+	memcpy(pgd + USER_PTRS_PER_PGD,
+	       swapper_pg_dir + USER_PTRS_PER_PGD,
+	       (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+}
+
+void pgtable_cache_init(void)
+{
+	pgd_cachep = kmem_cache_create("pgd_cache",
+				       PTRS_PER_PGD * (1<<PTE_MAGNITUDE),
+				       PAGE_SIZE, SLAB_PANIC, pgd_ctor);
+#if PAGETABLE_LEVELS > 2
+	pmd_cachep = kmem_cache_create("pmd_cache",
+				       PTRS_PER_PMD * (1<<PTE_MAGNITUDE),
+				       PAGE_SIZE, SLAB_PANIC, NULL);
+#endif
+}
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return kmem_cache_alloc(pgd_cachep, PGALLOC_GFP);
+}
+
+void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	kmem_cache_free(pgd_cachep, pgd);
+}
+
+#if PAGETABLE_LEVELS > 2
+void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	set_pud(pud, __pud((unsigned long)pmd));
+}
+
+pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	return kmem_cache_alloc(pmd_cachep, PGALLOC_GFP);
+}
+
+void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	kmem_cache_free(pmd_cachep, pmd);
+}
+#endif /* PAGETABLE_LEVELS > 2 */
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/pmb.c b/src/kernel/linux/v4.14/arch/sh/mm/pmb.c
new file mode 100644
index 0000000..7b2cc49
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/pmb.c
@@ -0,0 +1,903 @@
+/*
+ * arch/sh/mm/pmb.c
+ *
+ * Privileged Space Mapping Buffer (PMB) Support.
+ *
+ * Copyright (C) 2005 - 2011  Paul Mundt
+ * Copyright (C) 2010  Matt Fleming
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/syscore_ops.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/debugfs.h>
+#include <linux/fs.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/vmalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/sizes.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/mmu_context.h>
+
+struct pmb_entry;
+
+struct pmb_entry {
+	unsigned long vpn;
+	unsigned long ppn;
+	unsigned long flags;
+	unsigned long size;
+
+	raw_spinlock_t lock;
+
+	/*
+	 * 0 .. NR_PMB_ENTRIES for specific entry selection, or
+	 * PMB_NO_ENTRY to search for a free one
+	 */
+	int entry;
+
+	/* Adjacent entry link for contiguous multi-entry mappings */
+	struct pmb_entry *link;
+};
+
+static struct {
+	unsigned long size;
+	int flag;
+} pmb_sizes[] = {
+	{ .size	= SZ_512M, .flag = PMB_SZ_512M, },
+	{ .size = SZ_128M, .flag = PMB_SZ_128M, },
+	{ .size = SZ_64M,  .flag = PMB_SZ_64M,  },
+	{ .size = SZ_16M,  .flag = PMB_SZ_16M,  },
+};
+
+static void pmb_unmap_entry(struct pmb_entry *, int depth);
+
+static DEFINE_RWLOCK(pmb_rwlock);
+static struct pmb_entry pmb_entry_list[NR_PMB_ENTRIES];
+static DECLARE_BITMAP(pmb_map, NR_PMB_ENTRIES);
+
+static unsigned int pmb_iomapping_enabled;
+
+static __always_inline unsigned long mk_pmb_entry(unsigned int entry)
+{
+	return (entry & PMB_E_MASK) << PMB_E_SHIFT;
+}
+
+static __always_inline unsigned long mk_pmb_addr(unsigned int entry)
+{
+	return mk_pmb_entry(entry) | PMB_ADDR;
+}
+
+static __always_inline unsigned long mk_pmb_data(unsigned int entry)
+{
+	return mk_pmb_entry(entry) | PMB_DATA;
+}
+
+static __always_inline unsigned int pmb_ppn_in_range(unsigned long ppn)
+{
+	return ppn >= __pa(memory_start) && ppn < __pa(memory_end);
+}
+
+/*
+ * Ensure that the PMB entries match our cache configuration.
+ *
+ * When we are in 32-bit address extended mode, CCR.CB becomes
+ * invalid, so care must be taken to manually adjust cacheable
+ * translations.
+ */
+static __always_inline unsigned long pmb_cache_flags(void)
+{
+	unsigned long flags = 0;
+
+#if defined(CONFIG_CACHE_OFF)
+	flags |= PMB_WT | PMB_UB;
+#elif defined(CONFIG_CACHE_WRITETHROUGH)
+	flags |= PMB_C | PMB_WT | PMB_UB;
+#elif defined(CONFIG_CACHE_WRITEBACK)
+	flags |= PMB_C;
+#endif
+
+	return flags;
+}
+
+/*
+ * Convert typical pgprot value to the PMB equivalent
+ */
+static inline unsigned long pgprot_to_pmb_flags(pgprot_t prot)
+{
+	unsigned long pmb_flags = 0;
+	u64 flags = pgprot_val(prot);
+
+	if (flags & _PAGE_CACHABLE)
+		pmb_flags |= PMB_C;
+	if (flags & _PAGE_WT)
+		pmb_flags |= PMB_WT | PMB_UB;
+
+	return pmb_flags;
+}
+
+static inline bool pmb_can_merge(struct pmb_entry *a, struct pmb_entry *b)
+{
+	return (b->vpn == (a->vpn + a->size)) &&
+	       (b->ppn == (a->ppn + a->size)) &&
+	       (b->flags == a->flags);
+}
+
+static bool pmb_mapping_exists(unsigned long vaddr, phys_addr_t phys,
+			       unsigned long size)
+{
+	int i;
+
+	read_lock(&pmb_rwlock);
+
+	for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
+		struct pmb_entry *pmbe, *iter;
+		unsigned long span;
+
+		if (!test_bit(i, pmb_map))
+			continue;
+
+		pmbe = &pmb_entry_list[i];
+
+		/*
+		 * See if VPN and PPN are bounded by an existing mapping.
+		 */
+		if ((vaddr < pmbe->vpn) || (vaddr >= (pmbe->vpn + pmbe->size)))
+			continue;
+		if ((phys < pmbe->ppn) || (phys >= (pmbe->ppn + pmbe->size)))
+			continue;
+
+		/*
+		 * Now see if we're in range of a simple mapping.
+		 */
+		if (size <= pmbe->size) {
+			read_unlock(&pmb_rwlock);
+			return true;
+		}
+
+		span = pmbe->size;
+
+		/*
+		 * Finally for sizes that involve compound mappings, walk
+		 * the chain.
+		 */
+		for (iter = pmbe->link; iter; iter = iter->link)
+			span += iter->size;
+
+		/*
+		 * Nothing else to do if the range requirements are met.
+		 */
+		if (size <= span) {
+			read_unlock(&pmb_rwlock);
+			return true;
+		}
+	}
+
+	read_unlock(&pmb_rwlock);
+	return false;
+}
+
+static bool pmb_size_valid(unsigned long size)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
+		if (pmb_sizes[i].size == size)
+			return true;
+
+	return false;
+}
+
+static inline bool pmb_addr_valid(unsigned long addr, unsigned long size)
+{
+	return (addr >= P1SEG && (addr + size - 1) < P3SEG);
+}
+
+static inline bool pmb_prot_valid(pgprot_t prot)
+{
+	return (pgprot_val(prot) & _PAGE_USER) == 0;
+}
+
+static int pmb_size_to_flags(unsigned long size)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
+		if (pmb_sizes[i].size == size)
+			return pmb_sizes[i].flag;
+
+	return 0;
+}
+
+static int pmb_alloc_entry(void)
+{
+	int pos;
+
+	pos = find_first_zero_bit(pmb_map, NR_PMB_ENTRIES);
+	if (pos >= 0 && pos < NR_PMB_ENTRIES)
+		__set_bit(pos, pmb_map);
+	else
+		pos = -ENOSPC;
+
+	return pos;
+}
+
+static struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
+				   unsigned long flags, int entry)
+{
+	struct pmb_entry *pmbe;
+	unsigned long irqflags;
+	void *ret = NULL;
+	int pos;
+
+	write_lock_irqsave(&pmb_rwlock, irqflags);
+
+	if (entry == PMB_NO_ENTRY) {
+		pos = pmb_alloc_entry();
+		if (unlikely(pos < 0)) {
+			ret = ERR_PTR(pos);
+			goto out;
+		}
+	} else {
+		if (__test_and_set_bit(entry, pmb_map)) {
+			ret = ERR_PTR(-ENOSPC);
+			goto out;
+		}
+
+		pos = entry;
+	}
+
+	write_unlock_irqrestore(&pmb_rwlock, irqflags);
+
+	pmbe = &pmb_entry_list[pos];
+
+	memset(pmbe, 0, sizeof(struct pmb_entry));
+
+	raw_spin_lock_init(&pmbe->lock);
+
+	pmbe->vpn	= vpn;
+	pmbe->ppn	= ppn;
+	pmbe->flags	= flags;
+	pmbe->entry	= pos;
+
+	return pmbe;
+
+out:
+	write_unlock_irqrestore(&pmb_rwlock, irqflags);
+	return ret;
+}
+
+static void pmb_free(struct pmb_entry *pmbe)
+{
+	__clear_bit(pmbe->entry, pmb_map);
+
+	pmbe->entry	= PMB_NO_ENTRY;
+	pmbe->link	= NULL;
+}
+
+/*
+ * Must be run uncached.
+ */
+static void __set_pmb_entry(struct pmb_entry *pmbe)
+{
+	unsigned long addr, data;
+
+	addr = mk_pmb_addr(pmbe->entry);
+	data = mk_pmb_data(pmbe->entry);
+
+	jump_to_uncached();
+
+	/* Set V-bit */
+	__raw_writel(pmbe->vpn | PMB_V, addr);
+	__raw_writel(pmbe->ppn | pmbe->flags | PMB_V, data);
+
+	back_to_cached();
+}
+
+static void __clear_pmb_entry(struct pmb_entry *pmbe)
+{
+	unsigned long addr, data;
+	unsigned long addr_val, data_val;
+
+	addr = mk_pmb_addr(pmbe->entry);
+	data = mk_pmb_data(pmbe->entry);
+
+	addr_val = __raw_readl(addr);
+	data_val = __raw_readl(data);
+
+	/* Clear V-bit */
+	writel_uncached(addr_val & ~PMB_V, addr);
+	writel_uncached(data_val & ~PMB_V, data);
+}
+
+#ifdef CONFIG_PM
+static void set_pmb_entry(struct pmb_entry *pmbe)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&pmbe->lock, flags);
+	__set_pmb_entry(pmbe);
+	raw_spin_unlock_irqrestore(&pmbe->lock, flags);
+}
+#endif /* CONFIG_PM */
+
+int pmb_bolt_mapping(unsigned long vaddr, phys_addr_t phys,
+		     unsigned long size, pgprot_t prot)
+{
+	struct pmb_entry *pmbp, *pmbe;
+	unsigned long orig_addr, orig_size;
+	unsigned long flags, pmb_flags;
+	int i, mapped;
+
+	if (size < SZ_16M)
+		return -EINVAL;
+	if (!pmb_addr_valid(vaddr, size))
+		return -EFAULT;
+	if (pmb_mapping_exists(vaddr, phys, size))
+		return 0;
+
+	orig_addr = vaddr;
+	orig_size = size;
+
+	flush_tlb_kernel_range(vaddr, vaddr + size);
+
+	pmb_flags = pgprot_to_pmb_flags(prot);
+	pmbp = NULL;
+
+	do {
+		for (i = mapped = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
+			if (size < pmb_sizes[i].size)
+				continue;
+
+			pmbe = pmb_alloc(vaddr, phys, pmb_flags |
+					 pmb_sizes[i].flag, PMB_NO_ENTRY);
+			if (IS_ERR(pmbe)) {
+				pmb_unmap_entry(pmbp, mapped);
+				return PTR_ERR(pmbe);
+			}
+
+			raw_spin_lock_irqsave(&pmbe->lock, flags);
+
+			pmbe->size = pmb_sizes[i].size;
+
+			__set_pmb_entry(pmbe);
+
+			phys	+= pmbe->size;
+			vaddr	+= pmbe->size;
+			size	-= pmbe->size;
+
+			/*
+			 * Link adjacent entries that span multiple PMB
+			 * entries for easier tear-down.
+			 */
+			if (likely(pmbp)) {
+				raw_spin_lock_nested(&pmbp->lock,
+						     SINGLE_DEPTH_NESTING);
+				pmbp->link = pmbe;
+				raw_spin_unlock(&pmbp->lock);
+			}
+
+			pmbp = pmbe;
+
+			/*
+			 * Instead of trying smaller sizes on every
+			 * iteration (even if we succeed in allocating
+			 * space), try using pmb_sizes[i].size again.
+			 */
+			i--;
+			mapped++;
+
+			raw_spin_unlock_irqrestore(&pmbe->lock, flags);
+		}
+	} while (size >= SZ_16M);
+
+	flush_cache_vmap(orig_addr, orig_addr + orig_size);
+
+	return 0;
+}
+
+void __iomem *pmb_remap_caller(phys_addr_t phys, unsigned long size,
+			       pgprot_t prot, void *caller)
+{
+	unsigned long vaddr;
+	phys_addr_t offset, last_addr;
+	phys_addr_t align_mask;
+	unsigned long aligned;
+	struct vm_struct *area;
+	int i, ret;
+
+	if (!pmb_iomapping_enabled)
+		return NULL;
+
+	/*
+	 * Small mappings need to go through the TLB.
+	 */
+	if (size < SZ_16M)
+		return ERR_PTR(-EINVAL);
+	if (!pmb_prot_valid(prot))
+		return ERR_PTR(-EINVAL);
+
+	for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
+		if (size >= pmb_sizes[i].size)
+			break;
+
+	last_addr = phys + size;
+	align_mask = ~(pmb_sizes[i].size - 1);
+	offset = phys & ~align_mask;
+	phys &= align_mask;
+	aligned = ALIGN(last_addr, pmb_sizes[i].size) - phys;
+
+	/*
+	 * XXX: This should really start from uncached_end, but this
+	 * causes the MMU to reset, so for now we restrict it to the
+	 * 0xb000...0xc000 range.
+	 */
+	area = __get_vm_area_caller(aligned, VM_IOREMAP, 0xb0000000,
+				    P3SEG, caller);
+	if (!area)
+		return NULL;
+
+	area->phys_addr = phys;
+	vaddr = (unsigned long)area->addr;
+
+	ret = pmb_bolt_mapping(vaddr, phys, size, prot);
+	if (unlikely(ret != 0))
+		return ERR_PTR(ret);
+
+	return (void __iomem *)(offset + (char *)vaddr);
+}
+
+int pmb_unmap(void __iomem *addr)
+{
+	struct pmb_entry *pmbe = NULL;
+	unsigned long vaddr = (unsigned long __force)addr;
+	int i, found = 0;
+
+	read_lock(&pmb_rwlock);
+
+	for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
+		if (test_bit(i, pmb_map)) {
+			pmbe = &pmb_entry_list[i];
+			if (pmbe->vpn == vaddr) {
+				found = 1;
+				break;
+			}
+		}
+	}
+
+	read_unlock(&pmb_rwlock);
+
+	if (found) {
+		pmb_unmap_entry(pmbe, NR_PMB_ENTRIES);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static void __pmb_unmap_entry(struct pmb_entry *pmbe, int depth)
+{
+	do {
+		struct pmb_entry *pmblink = pmbe;
+
+		/*
+		 * We may be called before this pmb_entry has been
+		 * entered into the PMB table via set_pmb_entry(), but
+		 * that's OK because we've allocated a unique slot for
+		 * this entry in pmb_alloc() (even if we haven't filled
+		 * it yet).
+		 *
+		 * Therefore, calling __clear_pmb_entry() is safe as no
+		 * other mapping can be using that slot.
+		 */
+		__clear_pmb_entry(pmbe);
+
+		flush_cache_vunmap(pmbe->vpn, pmbe->vpn + pmbe->size);
+
+		pmbe = pmblink->link;
+
+		pmb_free(pmblink);
+	} while (pmbe && --depth);
+}
+
+static void pmb_unmap_entry(struct pmb_entry *pmbe, int depth)
+{
+	unsigned long flags;
+
+	if (unlikely(!pmbe))
+		return;
+
+	write_lock_irqsave(&pmb_rwlock, flags);
+	__pmb_unmap_entry(pmbe, depth);
+	write_unlock_irqrestore(&pmb_rwlock, flags);
+}
+
+static void __init pmb_notify(void)
+{
+	int i;
+
+	pr_info("PMB: boot mappings:\n");
+
+	read_lock(&pmb_rwlock);
+
+	for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
+		struct pmb_entry *pmbe;
+
+		if (!test_bit(i, pmb_map))
+			continue;
+
+		pmbe = &pmb_entry_list[i];
+
+		pr_info("       0x%08lx -> 0x%08lx [ %4ldMB %2scached ]\n",
+			pmbe->vpn >> PAGE_SHIFT, pmbe->ppn >> PAGE_SHIFT,
+			pmbe->size >> 20, (pmbe->flags & PMB_C) ? "" : "un");
+	}
+
+	read_unlock(&pmb_rwlock);
+}
+
+/*
+ * Sync our software copy of the PMB mappings with those in hardware. The
+ * mappings in the hardware PMB were either set up by the bootloader or
+ * very early on by the kernel.
+ */
+static void __init pmb_synchronize(void)
+{
+	struct pmb_entry *pmbp = NULL;
+	int i, j;
+
+	/*
+	 * Run through the initial boot mappings, log the established
+	 * ones, and blow away anything that falls outside of the valid
+	 * PPN range. Specifically, we only care about existing mappings
+	 * that impact the cached/uncached sections.
+	 *
+	 * Note that touching these can be a bit of a minefield; the boot
+	 * loader can establish multi-page mappings with the same caching
+	 * attributes, so we need to ensure that we aren't modifying a
+	 * mapping that we're presently executing from, or may execute
+	 * from in the case of straddling page boundaries.
+	 *
+	 * In the future we will have to tidy up after the boot loader by
+	 * jumping between the cached and uncached mappings and tearing
+	 * down alternating mappings while executing from the other.
+	 */
+	for (i = 0; i < NR_PMB_ENTRIES; i++) {
+		unsigned long addr, data;
+		unsigned long addr_val, data_val;
+		unsigned long ppn, vpn, flags;
+		unsigned long irqflags;
+		unsigned int size;
+		struct pmb_entry *pmbe;
+
+		addr = mk_pmb_addr(i);
+		data = mk_pmb_data(i);
+
+		addr_val = __raw_readl(addr);
+		data_val = __raw_readl(data);
+
+		/*
+		 * Skip over any bogus entries
+		 */
+		if (!(data_val & PMB_V) || !(addr_val & PMB_V))
+			continue;
+
+		ppn = data_val & PMB_PFN_MASK;
+		vpn = addr_val & PMB_PFN_MASK;
+
+		/*
+		 * Only preserve in-range mappings.
+		 */
+		if (!pmb_ppn_in_range(ppn)) {
+			/*
+			 * Invalidate anything out of bounds.
+			 */
+			writel_uncached(addr_val & ~PMB_V, addr);
+			writel_uncached(data_val & ~PMB_V, data);
+			continue;
+		}
+
+		/*
+		 * Update the caching attributes if necessary
+		 */
+		if (data_val & PMB_C) {
+			data_val &= ~PMB_CACHE_MASK;
+			data_val |= pmb_cache_flags();
+
+			writel_uncached(data_val, data);
+		}
+
+		size = data_val & PMB_SZ_MASK;
+		flags = size | (data_val & PMB_CACHE_MASK);
+
+		pmbe = pmb_alloc(vpn, ppn, flags, i);
+		if (IS_ERR(pmbe)) {
+			WARN_ON_ONCE(1);
+			continue;
+		}
+
+		raw_spin_lock_irqsave(&pmbe->lock, irqflags);
+
+		for (j = 0; j < ARRAY_SIZE(pmb_sizes); j++)
+			if (pmb_sizes[j].flag == size)
+				pmbe->size = pmb_sizes[j].size;
+
+		if (pmbp) {
+			raw_spin_lock_nested(&pmbp->lock, SINGLE_DEPTH_NESTING);
+			/*
+			 * Compare the previous entry against the current one to
+			 * see if the entries span a contiguous mapping. If so,
+			 * setup the entry links accordingly. Compound mappings
+			 * are later coalesced.
+			 */
+			if (pmb_can_merge(pmbp, pmbe))
+				pmbp->link = pmbe;
+			raw_spin_unlock(&pmbp->lock);
+		}
+
+		pmbp = pmbe;
+
+		raw_spin_unlock_irqrestore(&pmbe->lock, irqflags);
+	}
+}
+
+static void __init pmb_merge(struct pmb_entry *head)
+{
+	unsigned long span, newsize;
+	struct pmb_entry *tail;
+	int i = 1, depth = 0;
+
+	span = newsize = head->size;
+
+	tail = head->link;
+	while (tail) {
+		span += tail->size;
+
+		if (pmb_size_valid(span)) {
+			newsize = span;
+			depth = i;
+		}
+
+		/* This is the end of the line.. */
+		if (!tail->link)
+			break;
+
+		tail = tail->link;
+		i++;
+	}
+
+	/*
+	 * The merged page size must be valid.
+	 */
+	if (!depth || !pmb_size_valid(newsize))
+		return;
+
+	head->flags &= ~PMB_SZ_MASK;
+	head->flags |= pmb_size_to_flags(newsize);
+
+	head->size = newsize;
+
+	__pmb_unmap_entry(head->link, depth);
+	__set_pmb_entry(head);
+}
+
+static void __init pmb_coalesce(void)
+{
+	unsigned long flags;
+	int i;
+
+	write_lock_irqsave(&pmb_rwlock, flags);
+
+	for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
+		struct pmb_entry *pmbe;
+
+		if (!test_bit(i, pmb_map))
+			continue;
+
+		pmbe = &pmb_entry_list[i];
+
+		/*
+		 * We're only interested in compound mappings
+		 */
+		if (!pmbe->link)
+			continue;
+
+		/*
+		 * Nothing to do if it already uses the largest possible
+		 * page size.
+		 */
+		if (pmbe->size == SZ_512M)
+			continue;
+
+		pmb_merge(pmbe);
+	}
+
+	write_unlock_irqrestore(&pmb_rwlock, flags);
+}
+
+#ifdef CONFIG_UNCACHED_MAPPING
+static void __init pmb_resize(void)
+{
+	int i;
+
+	/*
+	 * If the uncached mapping was constructed by the kernel, it will
+	 * already be a reasonable size.
+	 */
+	if (uncached_size == SZ_16M)
+		return;
+
+	read_lock(&pmb_rwlock);
+
+	for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
+		struct pmb_entry *pmbe;
+		unsigned long flags;
+
+		if (!test_bit(i, pmb_map))
+			continue;
+
+		pmbe = &pmb_entry_list[i];
+
+		if (pmbe->vpn != uncached_start)
+			continue;
+
+		/*
+		 * Found it, now resize it.
+		 */
+		raw_spin_lock_irqsave(&pmbe->lock, flags);
+
+		pmbe->size = SZ_16M;
+		pmbe->flags &= ~PMB_SZ_MASK;
+		pmbe->flags |= pmb_size_to_flags(pmbe->size);
+
+		uncached_resize(pmbe->size);
+
+		__set_pmb_entry(pmbe);
+
+		raw_spin_unlock_irqrestore(&pmbe->lock, flags);
+	}
+
+	read_unlock(&pmb_rwlock);
+}
+#endif
+
+static int __init early_pmb(char *p)
+{
+	if (!p)
+		return 0;
+
+	if (strstr(p, "iomap"))
+		pmb_iomapping_enabled = 1;
+
+	return 0;
+}
+early_param("pmb", early_pmb);
+
+void __init pmb_init(void)
+{
+	/* Synchronize software state */
+	pmb_synchronize();
+
+	/* Attempt to combine compound mappings */
+	pmb_coalesce();
+
+#ifdef CONFIG_UNCACHED_MAPPING
+	/* Resize initial mappings, if necessary */
+	pmb_resize();
+#endif
+
+	/* Log them */
+	pmb_notify();
+
+	writel_uncached(0, PMB_IRMCR);
+
+	/* Flush out the TLB */
+	local_flush_tlb_all();
+	ctrl_barrier();
+}
+
+bool __in_29bit_mode(void)
+{
+        return (__raw_readl(PMB_PASCR) & PASCR_SE) == 0;
+}
+
+static int pmb_seq_show(struct seq_file *file, void *iter)
+{
+	int i;
+
+	seq_printf(file, "V: Valid, C: Cacheable, WT: Write-Through\n"
+			 "CB: Copy-Back, B: Buffered, UB: Unbuffered\n");
+	seq_printf(file, "ety   vpn  ppn  size   flags\n");
+
+	for (i = 0; i < NR_PMB_ENTRIES; i++) {
+		unsigned long addr, data;
+		unsigned int size;
+		char *sz_str = NULL;
+
+		addr = __raw_readl(mk_pmb_addr(i));
+		data = __raw_readl(mk_pmb_data(i));
+
+		size = data & PMB_SZ_MASK;
+		sz_str = (size == PMB_SZ_16M)  ? " 16MB":
+			 (size == PMB_SZ_64M)  ? " 64MB":
+			 (size == PMB_SZ_128M) ? "128MB":
+					         "512MB";
+
+		/* 02: V 0x88 0x08 128MB C CB  B */
+		seq_printf(file, "%02d: %c 0x%02lx 0x%02lx %s %c %s %s\n",
+			   i, ((addr & PMB_V) && (data & PMB_V)) ? 'V' : ' ',
+			   (addr >> 24) & 0xff, (data >> 24) & 0xff,
+			   sz_str, (data & PMB_C) ? 'C' : ' ',
+			   (data & PMB_WT) ? "WT" : "CB",
+			   (data & PMB_UB) ? "UB" : " B");
+	}
+
+	return 0;
+}
+
+static int pmb_debugfs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pmb_seq_show, NULL);
+}
+
+static const struct file_operations pmb_debugfs_fops = {
+	.owner		= THIS_MODULE,
+	.open		= pmb_debugfs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init pmb_debugfs_init(void)
+{
+	struct dentry *dentry;
+
+	dentry = debugfs_create_file("pmb", S_IFREG | S_IRUGO,
+				     arch_debugfs_dir, NULL, &pmb_debugfs_fops);
+	if (!dentry)
+		return -ENOMEM;
+
+	return 0;
+}
+subsys_initcall(pmb_debugfs_init);
+
+#ifdef CONFIG_PM
+static void pmb_syscore_resume(void)
+{
+	struct pmb_entry *pmbe;
+	int i;
+
+	read_lock(&pmb_rwlock);
+
+	for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
+		if (test_bit(i, pmb_map)) {
+			pmbe = &pmb_entry_list[i];
+			set_pmb_entry(pmbe);
+		}
+	}
+
+	read_unlock(&pmb_rwlock);
+}
+
+static struct syscore_ops pmb_syscore_ops = {
+	.resume = pmb_syscore_resume,
+};
+
+static int __init pmb_sysdev_init(void)
+{
+	register_syscore_ops(&pmb_syscore_ops);
+	return 0;
+}
+subsys_initcall(pmb_sysdev_init);
+#endif
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/sram.c b/src/kernel/linux/v4.14/arch/sh/mm/sram.c
new file mode 100644
index 0000000..2d8fa71
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/sram.c
@@ -0,0 +1,35 @@
+/*
+ * SRAM pool for tiny memories not otherwise managed.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <asm/sram.h>
+
+/*
+ * This provides a standard SRAM pool for tiny memories that can be
+ * added either by the CPU or the platform code. Typical SRAM sizes
+ * to be inserted in to the pool will generally be less than the page
+ * size, with anything more reasonably sized handled as a NUMA memory
+ * node.
+ */
+struct gen_pool *sram_pool;
+
+static int __init sram_pool_init(void)
+{
+	/*
+	 * This is a global pool, we don't care about node locality.
+	 */
+	sram_pool = gen_pool_create(1, -1);
+	if (unlikely(!sram_pool))
+		return -ENOMEM;
+
+	return 0;
+}
+core_initcall(sram_pool_init);
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/tlb-debugfs.c b/src/kernel/linux/v4.14/arch/sh/mm/tlb-debugfs.c
new file mode 100644
index 0000000..dea637a
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/tlb-debugfs.c
@@ -0,0 +1,172 @@
+/*
+ * arch/sh/mm/tlb-debugfs.c
+ *
+ * debugfs ops for SH-4 ITLB/UTLBs.
+ *
+ * Copyright (C) 2010  Matt Fleming
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <asm/processor.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+enum tlb_type {
+	TLB_TYPE_ITLB,
+	TLB_TYPE_UTLB,
+};
+
+static struct {
+	int bits;
+	const char *size;
+} tlb_sizes[] = {
+	{ 0x0, "  1KB" },
+	{ 0x1, "  4KB" },
+	{ 0x2, "  8KB" },
+	{ 0x4, " 64KB" },
+	{ 0x5, "256KB" },
+	{ 0x7, "  1MB" },
+	{ 0x8, "  4MB" },
+	{ 0xc, " 64MB" },
+};
+
+static int tlb_seq_show(struct seq_file *file, void *iter)
+{
+	unsigned int tlb_type = (unsigned int)file->private;
+	unsigned long addr1, addr2, data1, data2;
+	unsigned long flags;
+	unsigned long mmucr;
+	unsigned int nentries, entry;
+	unsigned int urb;
+
+	mmucr = __raw_readl(MMUCR);
+	if ((mmucr & 0x1) == 0) {
+		seq_printf(file, "address translation disabled\n");
+		return 0;
+	}
+
+	if (tlb_type == TLB_TYPE_ITLB) {
+		addr1 = MMU_ITLB_ADDRESS_ARRAY;
+		addr2 = MMU_ITLB_ADDRESS_ARRAY2;
+		data1 = MMU_ITLB_DATA_ARRAY;
+		data2 = MMU_ITLB_DATA_ARRAY2;
+		nentries = 4;
+	} else {
+		addr1 = MMU_UTLB_ADDRESS_ARRAY;
+		addr2 = MMU_UTLB_ADDRESS_ARRAY2;
+		data1 = MMU_UTLB_DATA_ARRAY;
+		data2 = MMU_UTLB_DATA_ARRAY2;
+		nentries = 64;
+	}
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	urb = (mmucr & MMUCR_URB) >> MMUCR_URB_SHIFT;
+
+	/* Make the "entry >= urb" test fail. */
+	if (urb == 0)
+		urb = MMUCR_URB_NENTRIES + 1;
+
+	if (tlb_type == TLB_TYPE_ITLB) {
+		addr1 = MMU_ITLB_ADDRESS_ARRAY;
+		addr2 = MMU_ITLB_ADDRESS_ARRAY2;
+		data1 = MMU_ITLB_DATA_ARRAY;
+		data2 = MMU_ITLB_DATA_ARRAY2;
+		nentries = 4;
+	} else {
+		addr1 = MMU_UTLB_ADDRESS_ARRAY;
+		addr2 = MMU_UTLB_ADDRESS_ARRAY2;
+		data1 = MMU_UTLB_DATA_ARRAY;
+		data2 = MMU_UTLB_DATA_ARRAY2;
+		nentries = 64;
+	}
+
+	seq_printf(file, "entry:     vpn        ppn     asid  size valid wired\n");
+
+	for (entry = 0; entry < nentries; entry++) {
+		unsigned long vpn, ppn, asid, size;
+		unsigned long valid;
+		unsigned long val;
+		const char *sz = "    ?";
+		int i;
+
+		val = __raw_readl(addr1 | (entry << MMU_TLB_ENTRY_SHIFT));
+		ctrl_barrier();
+		vpn = val & 0xfffffc00;
+		valid = val & 0x100;
+
+		val = __raw_readl(addr2 | (entry << MMU_TLB_ENTRY_SHIFT));
+		ctrl_barrier();
+		asid = val & MMU_CONTEXT_ASID_MASK;
+
+		val = __raw_readl(data1 | (entry << MMU_TLB_ENTRY_SHIFT));
+		ctrl_barrier();
+		ppn = (val & 0x0ffffc00) << 4;
+
+		val = __raw_readl(data2 | (entry << MMU_TLB_ENTRY_SHIFT));
+		ctrl_barrier();
+		size = (val & 0xf0) >> 4;
+
+		for (i = 0; i < ARRAY_SIZE(tlb_sizes); i++) {
+			if (tlb_sizes[i].bits == size)
+				break;
+		}
+
+		if (i != ARRAY_SIZE(tlb_sizes))
+			sz = tlb_sizes[i].size;
+
+		seq_printf(file, "%2d:    0x%08lx 0x%08lx %5lu %s   %s     %s\n",
+			   entry, vpn, ppn, asid,
+			   sz, valid ? "V" : "-",
+			   (urb <= entry) ? "W" : "-");
+	}
+
+	back_to_cached();
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int tlb_debugfs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, tlb_seq_show, inode->i_private);
+}
+
+static const struct file_operations tlb_debugfs_fops = {
+	.owner		= THIS_MODULE,
+	.open		= tlb_debugfs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init tlb_debugfs_init(void)
+{
+	struct dentry *itlb, *utlb;
+
+	itlb = debugfs_create_file("itlb", S_IRUSR, arch_debugfs_dir,
+				   (unsigned int *)TLB_TYPE_ITLB,
+				   &tlb_debugfs_fops);
+	if (unlikely(!itlb))
+		return -ENOMEM;
+
+	utlb = debugfs_create_file("utlb", S_IRUSR, arch_debugfs_dir,
+				   (unsigned int *)TLB_TYPE_UTLB,
+				   &tlb_debugfs_fops);
+	if (unlikely(!utlb)) {
+		debugfs_remove(itlb);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+module_init(tlb_debugfs_init);
+
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/tlb-pteaex.c b/src/kernel/linux/v4.14/arch/sh/mm/tlb-pteaex.c
new file mode 100644
index 0000000..4db21ad
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/tlb-pteaex.c
@@ -0,0 +1,106 @@
+/*
+ * arch/sh/mm/tlb-pteaex.c
+ *
+ * TLB operations for SH-X3 CPUs featuring PTE ASID Extensions.
+ *
+ * Copyright (C) 2009 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+	unsigned long flags, pteval, vpn;
+
+	/*
+	 * Handle debugger faulting in for debugee.
+	 */
+	if (vma && current->active_mm != vma->vm_mm)
+		return;
+
+	local_irq_save(flags);
+
+	/* Set PTEH register */
+	vpn = address & MMU_VPN_MASK;
+	__raw_writel(vpn, MMU_PTEH);
+
+	/* Set PTEAEX */
+	__raw_writel(get_asid(), MMU_PTEAEX);
+
+	pteval = pte.pte_low;
+
+	/* Set PTEA register */
+#ifdef CONFIG_X2TLB
+	/*
+	 * For the extended mode TLB this is trivial, only the ESZ and
+	 * EPR bits need to be written out to PTEA, with the remainder of
+	 * the protection bits (with the exception of the compat-mode SZ
+	 * and PR bits, which are cleared) being written out in PTEL.
+	 */
+	__raw_writel(pte.pte_high, MMU_PTEA);
+#endif
+
+	/* Set PTEL register */
+	pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
+#ifdef CONFIG_CACHE_WRITETHROUGH
+	pteval |= _PAGE_WT;
+#endif
+	/* conveniently, we want all the software flags to be 0 anyway */
+	__raw_writel(pteval, MMU_PTEL);
+
+	/* Load the TLB */
+	asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
+	local_irq_restore(flags);
+}
+
+/*
+ * While SH-X2 extended TLB mode splits out the memory-mapped I/UTLB
+ * data arrays, SH-X3 cores with PTEAEX split out the memory-mapped
+ * address arrays. In compat mode the second array is inaccessible, while
+ * in extended mode, the legacy 8-bit ASID field in address array 1 has
+ * undefined behaviour.
+ */
+void local_flush_tlb_one(unsigned long asid, unsigned long page)
+{
+	jump_to_uncached();
+	__raw_writel(page, MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT);
+	__raw_writel(asid, MMU_UTLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
+	__raw_writel(page, MMU_ITLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT);
+	__raw_writel(asid, MMU_ITLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
+	back_to_cached();
+}
+
+void local_flush_tlb_all(void)
+{
+	unsigned long flags, status;
+	int i;
+
+	/*
+	 * Flush all the TLB.
+	 */
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	status = __raw_readl(MMUCR);
+	status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
+
+	if (status == 0)
+		status = MMUCR_URB_NENTRIES;
+
+	for (i = 0; i < status; i++)
+		__raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
+
+	for (i = 0; i < 4; i++)
+		__raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
+
+	back_to_cached();
+	ctrl_barrier();
+	local_irq_restore(flags);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/tlb-sh3.c b/src/kernel/linux/v4.14/arch/sh/mm/tlb-sh3.c
new file mode 100644
index 0000000..5c66665
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/tlb-sh3.c
@@ -0,0 +1,97 @@
+/*
+ * arch/sh/mm/tlb-sh3.c
+ *
+ * SH-3 specific TLB operations
+ *
+ * Copyright (C) 1999  Niibe Yutaka
+ * Copyright (C) 2002  Paul Mundt
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+	unsigned long flags, pteval, vpn;
+
+	/*
+	 * Handle debugger faulting in for debugee.
+	 */
+	if (vma && current->active_mm != vma->vm_mm)
+		return;
+
+	local_irq_save(flags);
+
+	/* Set PTEH register */
+	vpn = (address & MMU_VPN_MASK) | get_asid();
+	__raw_writel(vpn, MMU_PTEH);
+
+	pteval = pte_val(pte);
+
+	/* Set PTEL register */
+	pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
+	/* conveniently, we want all the software flags to be 0 anyway */
+	__raw_writel(pteval, MMU_PTEL);
+
+	/* Load the TLB */
+	asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
+	local_irq_restore(flags);
+}
+
+void local_flush_tlb_one(unsigned long asid, unsigned long page)
+{
+	unsigned long addr, data;
+	int i, ways = MMU_NTLB_WAYS;
+
+	/*
+	 * NOTE: PTEH.ASID should be set to this MM
+	 *       _AND_ we need to write ASID to the array.
+	 *
+	 * It would be simple if we didn't need to set PTEH.ASID...
+	 */
+	addr = MMU_TLB_ADDRESS_ARRAY | (page & 0x1F000);
+	data = (page & 0xfffe0000) | asid; /* VALID bit is off */
+
+	if ((current_cpu_data.flags & CPU_HAS_MMU_PAGE_ASSOC)) {
+		addr |= MMU_PAGE_ASSOC_BIT;
+		ways = 1;	/* we already know the way .. */
+	}
+
+	for (i = 0; i < ways; i++)
+		__raw_writel(data, addr + (i << 8));
+}
+
+void local_flush_tlb_all(void)
+{
+	unsigned long flags, status;
+
+	/*
+	 * Flush all the TLB.
+	 *
+	 * Write to the MMU control register's bit:
+	 *	TF-bit for SH-3, TI-bit for SH-4.
+	 *      It's same position, bit #2.
+	 */
+	local_irq_save(flags);
+	status = __raw_readl(MMUCR);
+	status |= 0x04;
+	__raw_writel(status, MMUCR);
+	ctrl_barrier();
+	local_irq_restore(flags);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/tlb-sh4.c b/src/kernel/linux/v4.14/arch/sh/mm/tlb-sh4.c
new file mode 100644
index 0000000..d42dd7e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/tlb-sh4.c
@@ -0,0 +1,109 @@
+/*
+ * arch/sh/mm/tlb-sh4.c
+ *
+ * SH-4 specific TLB operations
+ *
+ * Copyright (C) 1999  Niibe Yutaka
+ * Copyright (C) 2002 - 2007 Paul Mundt
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+	unsigned long flags, pteval, vpn;
+
+	/*
+	 * Handle debugger faulting in for debugee.
+	 */
+	if (vma && current->active_mm != vma->vm_mm)
+		return;
+
+	local_irq_save(flags);
+
+	/* Set PTEH register */
+	vpn = (address & MMU_VPN_MASK) | get_asid();
+	__raw_writel(vpn, MMU_PTEH);
+
+	pteval = pte.pte_low;
+
+	/* Set PTEA register */
+#ifdef CONFIG_X2TLB
+	/*
+	 * For the extended mode TLB this is trivial, only the ESZ and
+	 * EPR bits need to be written out to PTEA, with the remainder of
+	 * the protection bits (with the exception of the compat-mode SZ
+	 * and PR bits, which are cleared) being written out in PTEL.
+	 */
+	__raw_writel(pte.pte_high, MMU_PTEA);
+#else
+	if (cpu_data->flags & CPU_HAS_PTEA) {
+		/* The last 3 bits and the first one of pteval contains
+		 * the PTEA timing control and space attribute bits
+		 */
+		__raw_writel(copy_ptea_attributes(pteval), MMU_PTEA);
+	}
+#endif
+
+	/* Set PTEL register */
+	pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
+#ifdef CONFIG_CACHE_WRITETHROUGH
+	pteval |= _PAGE_WT;
+#endif
+	/* conveniently, we want all the software flags to be 0 anyway */
+	__raw_writel(pteval, MMU_PTEL);
+
+	/* Load the TLB */
+	asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
+	local_irq_restore(flags);
+}
+
+void local_flush_tlb_one(unsigned long asid, unsigned long page)
+{
+	unsigned long addr, data;
+
+	/*
+	 * NOTE: PTEH.ASID should be set to this MM
+	 *       _AND_ we need to write ASID to the array.
+	 *
+	 * It would be simple if we didn't need to set PTEH.ASID...
+	 */
+	addr = MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT;
+	data = page | asid; /* VALID bit is off */
+	jump_to_uncached();
+	__raw_writel(data, addr);
+	back_to_cached();
+}
+
+void local_flush_tlb_all(void)
+{
+	unsigned long flags, status;
+	int i;
+
+	/*
+	 * Flush all the TLB.
+	 */
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	status = __raw_readl(MMUCR);
+	status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
+
+	if (status == 0)
+		status = MMUCR_URB_NENTRIES;
+
+	for (i = 0; i < status; i++)
+		__raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
+
+	for (i = 0; i < 4; i++)
+		__raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
+
+	back_to_cached();
+	ctrl_barrier();
+	local_irq_restore(flags);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/tlb-sh5.c b/src/kernel/linux/v4.14/arch/sh/mm/tlb-sh5.c
new file mode 100644
index 0000000..e4bb2a8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/tlb-sh5.c
@@ -0,0 +1,224 @@
+/*
+ * arch/sh/mm/tlb-sh5.c
+ *
+ * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
+ * Copyright (C) 2003  Richard Curnow <richard.curnow@superh.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/tlb.h>
+#include <asm/mmu_context.h>
+
+/**
+ * sh64_tlb_init - Perform initial setup for the DTLB and ITLB.
+ */
+int sh64_tlb_init(void)
+{
+	/* Assign some sane DTLB defaults */
+	cpu_data->dtlb.entries	= 64;
+	cpu_data->dtlb.step	= 0x10;
+
+	cpu_data->dtlb.first	= DTLB_FIXED | cpu_data->dtlb.step;
+	cpu_data->dtlb.next	= cpu_data->dtlb.first;
+
+	cpu_data->dtlb.last	= DTLB_FIXED |
+				  ((cpu_data->dtlb.entries - 1) *
+				   cpu_data->dtlb.step);
+
+	/* And again for the ITLB */
+	cpu_data->itlb.entries	= 64;
+	cpu_data->itlb.step	= 0x10;
+
+	cpu_data->itlb.first	= ITLB_FIXED | cpu_data->itlb.step;
+	cpu_data->itlb.next	= cpu_data->itlb.first;
+	cpu_data->itlb.last	= ITLB_FIXED |
+				  ((cpu_data->itlb.entries - 1) *
+				   cpu_data->itlb.step);
+
+	return 0;
+}
+
+/**
+ * sh64_next_free_dtlb_entry - Find the next available DTLB entry
+ */
+unsigned long long sh64_next_free_dtlb_entry(void)
+{
+	return cpu_data->dtlb.next;
+}
+
+/**
+ * sh64_get_wired_dtlb_entry - Allocate a wired (locked-in) entry in the DTLB
+ */
+unsigned long long sh64_get_wired_dtlb_entry(void)
+{
+	unsigned long long entry = sh64_next_free_dtlb_entry();
+
+	cpu_data->dtlb.first += cpu_data->dtlb.step;
+	cpu_data->dtlb.next  += cpu_data->dtlb.step;
+
+	return entry;
+}
+
+/**
+ * sh64_put_wired_dtlb_entry - Free a wired (locked-in) entry in the DTLB.
+ *
+ * @entry:	Address of TLB slot.
+ *
+ * Works like a stack, last one to allocate must be first one to free.
+ */
+int sh64_put_wired_dtlb_entry(unsigned long long entry)
+{
+	__flush_tlb_slot(entry);
+
+	/*
+	 * We don't do any particularly useful tracking of wired entries,
+	 * so this approach works like a stack .. last one to be allocated
+	 * has to be the first one to be freed.
+	 *
+	 * We could potentially load wired entries into a list and work on
+	 * rebalancing the list periodically (which also entails moving the
+	 * contents of a TLB entry) .. though I have a feeling that this is
+	 * more trouble than it's worth.
+	 */
+
+	/*
+	 * Entry must be valid .. we don't want any ITLB addresses!
+	 */
+	if (entry <= DTLB_FIXED)
+		return -EINVAL;
+
+	/*
+	 * Next, check if we're within range to be freed. (ie, must be the
+	 * entry beneath the first 'free' entry!
+	 */
+	if (entry < (cpu_data->dtlb.first - cpu_data->dtlb.step))
+		return -EINVAL;
+
+	/* If we are, then bring this entry back into the list */
+	cpu_data->dtlb.first	-= cpu_data->dtlb.step;
+	cpu_data->dtlb.next	= entry;
+
+	return 0;
+}
+
+/**
+ * sh64_setup_tlb_slot - Load up a translation in a wired slot.
+ *
+ * @config_addr:	Address of TLB slot.
+ * @eaddr:		Virtual address.
+ * @asid:		Address Space Identifier.
+ * @paddr:		Physical address.
+ *
+ * Load up a virtual<->physical translation for @eaddr<->@paddr in the
+ * pre-allocated TLB slot @config_addr (see sh64_get_wired_dtlb_entry).
+ */
+void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
+			 unsigned long asid, unsigned long paddr)
+{
+	unsigned long long pteh, ptel;
+
+	pteh = neff_sign_extend(eaddr);
+	pteh &= PAGE_MASK;
+	pteh |= (asid << PTEH_ASID_SHIFT) | PTEH_VALID;
+	ptel = neff_sign_extend(paddr);
+	ptel &= PAGE_MASK;
+	ptel |= (_PAGE_CACHABLE | _PAGE_READ | _PAGE_WRITE);
+
+	asm volatile("putcfg %0, 1, %1\n\t"
+			"putcfg %0, 0, %2\n"
+			: : "r" (config_addr), "r" (ptel), "r" (pteh));
+}
+
+/**
+ * sh64_teardown_tlb_slot - Teardown a translation.
+ *
+ * @config_addr:	Address of TLB slot.
+ *
+ * Teardown any existing mapping in the TLB slot @config_addr.
+ */
+void sh64_teardown_tlb_slot(unsigned long long config_addr)
+	__attribute__ ((alias("__flush_tlb_slot")));
+
+static int dtlb_entry;
+static unsigned long long dtlb_entries[64];
+
+void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+	unsigned long long entry;
+	unsigned long paddr, flags;
+
+	BUG_ON(dtlb_entry == ARRAY_SIZE(dtlb_entries));
+
+	local_irq_save(flags);
+
+	entry = sh64_get_wired_dtlb_entry();
+	dtlb_entries[dtlb_entry++] = entry;
+
+	paddr = pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK;
+	paddr &= ~PAGE_MASK;
+
+	sh64_setup_tlb_slot(entry, addr, get_asid(), paddr);
+
+	local_irq_restore(flags);
+}
+
+void tlb_unwire_entry(void)
+{
+	unsigned long long entry;
+	unsigned long flags;
+
+	BUG_ON(!dtlb_entry);
+
+	local_irq_save(flags);
+	entry = dtlb_entries[dtlb_entry--];
+
+	sh64_teardown_tlb_slot(entry);
+	sh64_put_wired_dtlb_entry(entry);
+
+	local_irq_restore(flags);
+}
+
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+	unsigned long long ptel;
+	unsigned long long pteh=0;
+	struct tlb_info *tlbp;
+	unsigned long long next;
+	unsigned int fault_code = get_thread_fault_code();
+
+	/* Get PTEL first */
+	ptel = pte.pte_low;
+
+	/*
+	 * Set PTEH register
+	 */
+	pteh = neff_sign_extend(address & MMU_VPN_MASK);
+
+	/* Set the ASID. */
+	pteh |= get_asid() << PTEH_ASID_SHIFT;
+	pteh |= PTEH_VALID;
+
+	/* Set PTEL register, set_pte has performed the sign extension */
+	ptel &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
+
+	if (fault_code & FAULT_CODE_ITLB)
+		tlbp = &cpu_data->itlb;
+	else
+		tlbp = &cpu_data->dtlb;
+
+	next = tlbp->next;
+	__flush_tlb_slot(next);
+	asm volatile ("putcfg %0,1,%2\n\n\t"
+		      "putcfg %0,0,%1\n"
+		      :  : "r" (next), "r" (pteh), "r" (ptel) );
+
+	next += TLB_STEP;
+	if (next > tlbp->last)
+		next = tlbp->first;
+	tlbp->next = next;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/tlb-urb.c b/src/kernel/linux/v4.14/arch/sh/mm/tlb-urb.c
new file mode 100644
index 0000000..c92ce20
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/tlb-urb.c
@@ -0,0 +1,93 @@
+/*
+ * arch/sh/mm/tlb-urb.c
+ *
+ * TLB entry wiring helpers for URB-equipped parts.
+ *
+ * Copyright (C) 2010  Matt Fleming
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <asm/tlb.h>
+#include <asm/mmu_context.h>
+
+/*
+ * Load the entry for 'addr' into the TLB and wire the entry.
+ */
+void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+	unsigned long status, flags;
+	int urb;
+
+	local_irq_save(flags);
+
+	status = __raw_readl(MMUCR);
+	urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
+	status &= ~MMUCR_URC;
+
+	/*
+	 * Make sure we're not trying to wire the last TLB entry slot.
+	 */
+	BUG_ON(!--urb);
+
+	urb = urb % MMUCR_URB_NENTRIES;
+
+	/*
+	 * Insert this entry into the highest non-wired TLB slot (via
+	 * the URC field).
+	 */
+	status |= (urb << MMUCR_URC_SHIFT);
+	__raw_writel(status, MMUCR);
+	ctrl_barrier();
+
+	/* Load the entry into the TLB */
+	__update_tlb(vma, addr, pte);
+
+	/* ... and wire it up. */
+	status = __raw_readl(MMUCR);
+
+	status &= ~MMUCR_URB;
+	status |= (urb << MMUCR_URB_SHIFT);
+
+	__raw_writel(status, MMUCR);
+	ctrl_barrier();
+
+	local_irq_restore(flags);
+}
+
+/*
+ * Unwire the last wired TLB entry.
+ *
+ * It should also be noted that it is not possible to wire and unwire
+ * TLB entries in an arbitrary order. If you wire TLB entry N, followed
+ * by entry N+1, you must unwire entry N+1 first, then entry N. In this
+ * respect, it works like a stack or LIFO queue.
+ */
+void tlb_unwire_entry(void)
+{
+	unsigned long status, flags;
+	int urb;
+
+	local_irq_save(flags);
+
+	status = __raw_readl(MMUCR);
+	urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
+	status &= ~MMUCR_URB;
+
+	/*
+	 * Make sure we're not trying to unwire a TLB entry when none
+	 * have been wired.
+	 */
+	BUG_ON(urb++ == MMUCR_URB_NENTRIES);
+
+	urb = urb % MMUCR_URB_NENTRIES;
+
+	status |= (urb << MMUCR_URB_SHIFT);
+	__raw_writel(status, MMUCR);
+	ctrl_barrier();
+
+	local_irq_restore(flags);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/tlbex_32.c b/src/kernel/linux/v4.14/arch/sh/mm/tlbex_32.c
new file mode 100644
index 0000000..382262d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/tlbex_32.c
@@ -0,0 +1,78 @@
+/*
+ * TLB miss handler for SH with an MMU.
+ *
+ *  Copyright (C) 1999  Niibe Yutaka
+ *  Copyright (C) 2003 - 2012  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/kprobes.h>
+#include <linux/kdebug.h>
+#include <asm/mmu_context.h>
+#include <asm/thread_info.h>
+
+/*
+ * Called with interrupts disabled.
+ */
+asmlinkage int __kprobes
+handle_tlbmiss(struct pt_regs *regs, unsigned long error_code,
+	       unsigned long address)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+	pte_t entry;
+
+	/*
+	 * We don't take page faults for P1, P2, and parts of P4, these
+	 * are always mapped, whether it be due to legacy behaviour in
+	 * 29-bit mode, or due to PMB configuration in 32-bit mode.
+	 */
+	if (address >= P3SEG && address < P3_ADDR_MAX) {
+		pgd = pgd_offset_k(address);
+	} else {
+		if (unlikely(address >= TASK_SIZE || !current->mm))
+			return 1;
+
+		pgd = pgd_offset(current->mm, address);
+	}
+
+	pud = pud_offset(pgd, address);
+	if (pud_none_or_clear_bad(pud))
+		return 1;
+	pmd = pmd_offset(pud, address);
+	if (pmd_none_or_clear_bad(pmd))
+		return 1;
+	pte = pte_offset_kernel(pmd, address);
+	entry = *pte;
+	if (unlikely(pte_none(entry) || pte_not_present(entry)))
+		return 1;
+	if (unlikely(error_code && !pte_write(entry)))
+		return 1;
+
+	if (error_code)
+		entry = pte_mkdirty(entry);
+	entry = pte_mkyoung(entry);
+
+	set_pte(pte, entry);
+
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SMP)
+	/*
+	 * SH-4 does not set MMUCR.RC to the corresponding TLB entry in
+	 * the case of an initial page write exception, so we need to
+	 * flush it in order to avoid potential TLB entry duplication.
+	 */
+	if (error_code == FAULT_CODE_INITIAL)
+		local_flush_tlb_one(get_asid(), address & PAGE_MASK);
+#endif
+
+	set_thread_fault_code(error_code);
+	update_mmu_cache(NULL, address, pte);
+
+	return 0;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/tlbex_64.c b/src/kernel/linux/v4.14/arch/sh/mm/tlbex_64.c
new file mode 100644
index 0000000..8ff966d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/tlbex_64.c
@@ -0,0 +1,166 @@
+/*
+ * The SH64 TLB miss.
+ *
+ * Original code from fault.c
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ * Fast PTE->TLB refill path
+ * Copyright (C) 2003 Richard.Curnow@superh.com
+ *
+ * IMPORTANT NOTES :
+ * The do_fast_page_fault function is called from a context in entry.S
+ * where very few registers have been saved.  In particular, the code in
+ * this file must be compiled not to use ANY caller-save registers that
+ * are not part of the restricted save set.  Also, it means that code in
+ * this file must not make calls to functions elsewhere in the kernel, or
+ * else the excepting context will see corruption in its caller-save
+ * registers.  Plus, the entry.S save area is non-reentrant, so this code
+ * has to run with SR.BL==1, i.e. no interrupts taken inside it and panic
+ * on any exception.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/kprobes.h>
+#include <asm/tlb.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
+
+static int handle_tlbmiss(unsigned long long protection_flags,
+			  unsigned long address)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+	pte_t entry;
+
+	if (is_vmalloc_addr((void *)address)) {
+		pgd = pgd_offset_k(address);
+	} else {
+		if (unlikely(address >= TASK_SIZE || !current->mm))
+			return 1;
+
+		pgd = pgd_offset(current->mm, address);
+	}
+
+	pud = pud_offset(pgd, address);
+	if (pud_none(*pud) || !pud_present(*pud))
+		return 1;
+
+	pmd = pmd_offset(pud, address);
+	if (pmd_none(*pmd) || !pmd_present(*pmd))
+		return 1;
+
+	pte = pte_offset_kernel(pmd, address);
+	entry = *pte;
+	if (pte_none(entry) || !pte_present(entry))
+		return 1;
+
+	/*
+	 * If the page doesn't have sufficient protection bits set to
+	 * service the kind of fault being handled, there's not much
+	 * point doing the TLB refill.  Punt the fault to the general
+	 * handler.
+	 */
+	if ((pte_val(entry) & protection_flags) != protection_flags)
+		return 1;
+
+	update_mmu_cache(NULL, address, pte);
+
+	return 0;
+}
+
+/*
+ * Put all this information into one structure so that everything is just
+ * arithmetic relative to a single base address.  This reduces the number
+ * of movi/shori pairs needed just to load addresses of static data.
+ */
+struct expevt_lookup {
+	unsigned short protection_flags[8];
+	unsigned char  is_text_access[8];
+	unsigned char  is_write_access[8];
+};
+
+#define PRU (1<<9)
+#define PRW (1<<8)
+#define PRX (1<<7)
+#define PRR (1<<6)
+
+/* Sized as 8 rather than 4 to allow checking the PTE's PRU bit against whether
+   the fault happened in user mode or privileged mode. */
+static struct expevt_lookup expevt_lookup_table = {
+	.protection_flags = {PRX, PRX, 0, 0, PRR, PRR, PRW, PRW},
+	.is_text_access   = {1,   1,   0, 0, 0,   0,   0,   0}
+};
+
+static inline unsigned int
+expevt_to_fault_code(unsigned long expevt)
+{
+	if (expevt == 0xa40)
+		return FAULT_CODE_ITLB;
+	else if (expevt == 0x060)
+		return FAULT_CODE_WRITE;
+
+	return 0;
+}
+
+/*
+   This routine handles page faults that can be serviced just by refilling a
+   TLB entry from an existing page table entry.  (This case represents a very
+   large majority of page faults.) Return 1 if the fault was successfully
+   handled.  Return 0 if the fault could not be handled.  (This leads into the
+   general fault handling in fault.c which deals with mapping file-backed
+   pages, stack growth, segmentation faults, swapping etc etc)
+ */
+asmlinkage int __kprobes
+do_fast_page_fault(unsigned long long ssr_md, unsigned long long expevt,
+		   unsigned long address)
+{
+	unsigned long long protection_flags;
+	unsigned long long index;
+	unsigned long long expevt4;
+	unsigned int fault_code;
+
+	/* The next few lines implement a way of hashing EXPEVT into a
+	 * small array index which can be used to lookup parameters
+	 * specific to the type of TLBMISS being handled.
+	 *
+	 * Note:
+	 *	ITLBMISS has EXPEVT==0xa40
+	 *	RTLBMISS has EXPEVT==0x040
+	 *	WTLBMISS has EXPEVT==0x060
+	 */
+	expevt4 = (expevt >> 4);
+	/* TODO : xor ssr_md into this expression too. Then we can check
+	 * that PRU is set when it needs to be. */
+	index = expevt4 ^ (expevt4 >> 5);
+	index &= 7;
+
+	fault_code = expevt_to_fault_code(expevt);
+
+	protection_flags = expevt_lookup_table.protection_flags[index];
+
+	if (expevt_lookup_table.is_text_access[index])
+		fault_code |= FAULT_CODE_ITLB;
+	if (!ssr_md)
+		fault_code |= FAULT_CODE_USER;
+
+	set_thread_fault_code(fault_code);
+
+	return handle_tlbmiss(protection_flags, address);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/tlbflush_32.c b/src/kernel/linux/v4.14/arch/sh/mm/tlbflush_32.c
new file mode 100644
index 0000000..a6a20d6
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/tlbflush_32.c
@@ -0,0 +1,137 @@
+/*
+ * TLB flushing operations for SH with an MMU.
+ *
+ *  Copyright (C) 1999  Niibe Yutaka
+ *  Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+	unsigned int cpu = smp_processor_id();
+
+	if (vma->vm_mm && cpu_context(cpu, vma->vm_mm) != NO_CONTEXT) {
+		unsigned long flags;
+		unsigned long asid;
+		unsigned long saved_asid = MMU_NO_ASID;
+
+		asid = cpu_asid(cpu, vma->vm_mm);
+		page &= PAGE_MASK;
+
+		local_irq_save(flags);
+		if (vma->vm_mm != current->mm) {
+			saved_asid = get_asid();
+			set_asid(asid);
+		}
+		local_flush_tlb_one(asid, page);
+		if (saved_asid != MMU_NO_ASID)
+			set_asid(saved_asid);
+		local_irq_restore(flags);
+	}
+}
+
+void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			   unsigned long end)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	unsigned int cpu = smp_processor_id();
+
+	if (cpu_context(cpu, mm) != NO_CONTEXT) {
+		unsigned long flags;
+		int size;
+
+		local_irq_save(flags);
+		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+		if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */
+			cpu_context(cpu, mm) = NO_CONTEXT;
+			if (mm == current->mm)
+				activate_context(mm, cpu);
+		} else {
+			unsigned long asid;
+			unsigned long saved_asid = MMU_NO_ASID;
+
+			asid = cpu_asid(cpu, mm);
+			start &= PAGE_MASK;
+			end += (PAGE_SIZE - 1);
+			end &= PAGE_MASK;
+			if (mm != current->mm) {
+				saved_asid = get_asid();
+				set_asid(asid);
+			}
+			while (start < end) {
+				local_flush_tlb_one(asid, start);
+				start += PAGE_SIZE;
+			}
+			if (saved_asid != MMU_NO_ASID)
+				set_asid(saved_asid);
+		}
+		local_irq_restore(flags);
+	}
+}
+
+void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	unsigned int cpu = smp_processor_id();
+	unsigned long flags;
+	int size;
+
+	local_irq_save(flags);
+	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+	if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */
+		local_flush_tlb_all();
+	} else {
+		unsigned long asid;
+		unsigned long saved_asid = get_asid();
+
+		asid = cpu_asid(cpu, &init_mm);
+		start &= PAGE_MASK;
+		end += (PAGE_SIZE - 1);
+		end &= PAGE_MASK;
+		set_asid(asid);
+		while (start < end) {
+			local_flush_tlb_one(asid, start);
+			start += PAGE_SIZE;
+		}
+		set_asid(saved_asid);
+	}
+	local_irq_restore(flags);
+}
+
+void local_flush_tlb_mm(struct mm_struct *mm)
+{
+	unsigned int cpu = smp_processor_id();
+
+	/* Invalidate all TLB of this process. */
+	/* Instead of invalidating each TLB, we get new MMU context. */
+	if (cpu_context(cpu, mm) != NO_CONTEXT) {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		cpu_context(cpu, mm) = NO_CONTEXT;
+		if (mm == current->mm)
+			activate_context(mm, cpu);
+		local_irq_restore(flags);
+	}
+}
+
+void __flush_tlb_global(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/*
+	 * This is the most destructive of the TLB flushing options,
+	 * and will tear down all of the UTLB/ITLB mappings, including
+	 * wired entries.
+	 */
+	__raw_writel(__raw_readl(MMUCR) | MMUCR_TI, MMUCR);
+
+	local_irq_restore(flags);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/tlbflush_64.c b/src/kernel/linux/v4.14/arch/sh/mm/tlbflush_64.c
new file mode 100644
index 0000000..bd0715d
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/tlbflush_64.c
@@ -0,0 +1,172 @@
+/*
+ * arch/sh/mm/tlb-flush_64.c
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Richard Curnow (/proc/tlb, bug fixes)
+ * Copyright (C) 2003 - 2012 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/signal.h>
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/perf_event.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/tlb.h>
+#include <linux/uaccess.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
+
+void local_flush_tlb_one(unsigned long asid, unsigned long page)
+{
+	unsigned long long match, pteh=0, lpage;
+	unsigned long tlb;
+
+	/*
+	 * Sign-extend based on neff.
+	 */
+	lpage = neff_sign_extend(page);
+	match = (asid << PTEH_ASID_SHIFT) | PTEH_VALID;
+	match |= lpage;
+
+	for_each_itlb_entry(tlb) {
+		asm volatile ("getcfg	%1, 0, %0"
+			      : "=r" (pteh)
+			      : "r" (tlb) );
+
+		if (pteh == match) {
+			__flush_tlb_slot(tlb);
+			break;
+		}
+	}
+
+	for_each_dtlb_entry(tlb) {
+		asm volatile ("getcfg	%1, 0, %0"
+			      : "=r" (pteh)
+			      : "r" (tlb) );
+
+		if (pteh == match) {
+			__flush_tlb_slot(tlb);
+			break;
+		}
+
+	}
+}
+
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+	unsigned long flags;
+
+	if (vma->vm_mm) {
+		page &= PAGE_MASK;
+		local_irq_save(flags);
+		local_flush_tlb_one(get_asid(), page);
+		local_irq_restore(flags);
+	}
+}
+
+void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			   unsigned long end)
+{
+	unsigned long flags;
+	unsigned long long match, pteh=0, pteh_epn, pteh_low;
+	unsigned long tlb;
+	unsigned int cpu = smp_processor_id();
+	struct mm_struct *mm;
+
+	mm = vma->vm_mm;
+	if (cpu_context(cpu, mm) == NO_CONTEXT)
+		return;
+
+	local_irq_save(flags);
+
+	start &= PAGE_MASK;
+	end &= PAGE_MASK;
+
+	match = (cpu_asid(cpu, mm) << PTEH_ASID_SHIFT) | PTEH_VALID;
+
+	/* Flush ITLB */
+	for_each_itlb_entry(tlb) {
+		asm volatile ("getcfg	%1, 0, %0"
+			      : "=r" (pteh)
+			      : "r" (tlb) );
+
+		pteh_epn = pteh & PAGE_MASK;
+		pteh_low = pteh & ~PAGE_MASK;
+
+		if (pteh_low == match && pteh_epn >= start && pteh_epn <= end)
+			__flush_tlb_slot(tlb);
+	}
+
+	/* Flush DTLB */
+	for_each_dtlb_entry(tlb) {
+		asm volatile ("getcfg	%1, 0, %0"
+			      : "=r" (pteh)
+			      : "r" (tlb) );
+
+		pteh_epn = pteh & PAGE_MASK;
+		pteh_low = pteh & ~PAGE_MASK;
+
+		if (pteh_low == match && pteh_epn >= start && pteh_epn <= end)
+			__flush_tlb_slot(tlb);
+	}
+
+	local_irq_restore(flags);
+}
+
+void local_flush_tlb_mm(struct mm_struct *mm)
+{
+	unsigned long flags;
+	unsigned int cpu = smp_processor_id();
+
+	if (cpu_context(cpu, mm) == NO_CONTEXT)
+		return;
+
+	local_irq_save(flags);
+
+	cpu_context(cpu, mm) = NO_CONTEXT;
+	if (mm == current->mm)
+		activate_context(mm, cpu);
+
+	local_irq_restore(flags);
+}
+
+void local_flush_tlb_all(void)
+{
+	/* Invalidate all, including shared pages, excluding fixed TLBs */
+	unsigned long flags, tlb;
+
+	local_irq_save(flags);
+
+	/* Flush each ITLB entry */
+	for_each_itlb_entry(tlb)
+		__flush_tlb_slot(tlb);
+
+	/* Flush each DTLB entry */
+	for_each_dtlb_entry(tlb)
+		__flush_tlb_slot(tlb);
+
+	local_irq_restore(flags);
+}
+
+void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+        /* FIXME: Optimize this later.. */
+        flush_tlb_all();
+}
+
+void __flush_tlb_global(void)
+{
+	flush_tlb_all();
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/mm/uncached.c b/src/kernel/linux/v4.14/arch/sh/mm/uncached.c
new file mode 100644
index 0000000..010010b
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/mm/uncached.c
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/init.h>
+#include <linux/module.h>
+#include <asm/sizes.h>
+#include <asm/page.h>
+#include <asm/addrspace.h>
+
+/*
+ * This is the offset of the uncached section from its cached alias.
+ *
+ * Legacy platforms handle trivial transitions between cached and
+ * uncached segments by making use of the 1:1 mapping relationship in
+ * 512MB lowmem, others via a special uncached mapping.
+ *
+ * Default value only valid in 29 bit mode, in 32bit mode this will be
+ * updated by the early PMB initialization code.
+ */
+unsigned long cached_to_uncached = SZ_512M;
+unsigned long uncached_size = SZ_512M;
+unsigned long uncached_start, uncached_end;
+EXPORT_SYMBOL(uncached_start);
+EXPORT_SYMBOL(uncached_end);
+
+int virt_addr_uncached(unsigned long kaddr)
+{
+	return (kaddr >= uncached_start) && (kaddr < uncached_end);
+}
+EXPORT_SYMBOL(virt_addr_uncached);
+
+void __init uncached_init(void)
+{
+#if defined(CONFIG_29BIT) || !defined(CONFIG_MMU)
+	uncached_start = P2SEG;
+#else
+	uncached_start = memory_end;
+#endif
+	uncached_end = uncached_start + uncached_size;
+}
+
+void __init uncached_resize(unsigned long size)
+{
+	uncached_size = size;
+	uncached_end = uncached_start + uncached_size;
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/oprofile/Makefile b/src/kernel/linux/v4.14/arch/sh/oprofile/Makefile
new file mode 100644
index 0000000..d478dd8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/oprofile/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+CFLAGS_common.o	+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
+
+DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
+		oprof.o cpu_buffer.o buffer_sync.o \
+		event_buffer.o oprofile_files.o \
+		oprofilefs.o oprofile_stats.o \
+		timer_int.o )
+
+ifeq ($(CONFIG_HW_PERF_EVENTS),y)
+DRIVER_OBJS += $(addprefix ../../../drivers/oprofile/, oprofile_perf.o)
+endif
+
+oprofile-y	:= $(DRIVER_OBJS) common.o backtrace.o
diff --git a/src/kernel/linux/v4.14/arch/sh/oprofile/backtrace.c b/src/kernel/linux/v4.14/arch/sh/oprofile/backtrace.c
new file mode 100644
index 0000000..c7695f9
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/oprofile/backtrace.c
@@ -0,0 +1,91 @@
+/*
+ * SH specific backtracing code for oprofile
+ *
+ * Copyright 2007 STMicroelectronics Ltd.
+ *
+ * Author: Dave Peverley <dpeverley@mpc-data.co.uk>
+ *
+ * Based on ARM oprofile backtrace code by Richard Purdie and in turn, i386
+ * oprofile backtrace code by John Levon, David Smith
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/oprofile.h>
+#include <linux/sched.h>
+#include <linux/kallsyms.h>
+#include <linux/mm.h>
+#include <asm/unwinder.h>
+#include <asm/ptrace.h>
+#include <linux/uaccess.h>
+#include <asm/sections.h>
+#include <asm/stacktrace.h>
+
+static int backtrace_stack(void *data, char *name)
+{
+	/* Yes, we want all stacks */
+	return 0;
+}
+
+static void backtrace_address(void *data, unsigned long addr, int reliable)
+{
+	unsigned int *depth = data;
+
+	if ((*depth)--)
+		oprofile_add_trace(addr);
+}
+
+static struct stacktrace_ops backtrace_ops = {
+	.stack = backtrace_stack,
+	.address = backtrace_address,
+};
+
+/* Limit to stop backtracing too far. */
+static int backtrace_limit = 20;
+
+static unsigned long *
+user_backtrace(unsigned long *stackaddr, struct pt_regs *regs)
+{
+	unsigned long buf_stack;
+
+	/* Also check accessibility of address */
+	if (!access_ok(VERIFY_READ, stackaddr, sizeof(unsigned long)))
+		return NULL;
+
+	if (__copy_from_user_inatomic(&buf_stack, stackaddr, sizeof(unsigned long)))
+		return NULL;
+
+	/* Quick paranoia check */
+	if (buf_stack & 3)
+		return NULL;
+
+	oprofile_add_trace(buf_stack);
+
+	stackaddr++;
+
+	return stackaddr;
+}
+
+void sh_backtrace(struct pt_regs * const regs, unsigned int depth)
+{
+	unsigned long *stackaddr;
+
+	/*
+	 * Paranoia - clip max depth as we could get lost in the weeds.
+	 */
+	if (depth > backtrace_limit)
+		depth = backtrace_limit;
+
+	stackaddr = (unsigned long *)kernel_stack_pointer(regs);
+	if (!user_mode(regs)) {
+		if (depth)
+			unwind_stack(NULL, regs, stackaddr,
+				     &backtrace_ops, &depth);
+		return;
+	}
+
+	while (depth-- && (stackaddr != NULL))
+		stackaddr = user_backtrace(stackaddr, regs);
+}
diff --git a/src/kernel/linux/v4.14/arch/sh/oprofile/common.c b/src/kernel/linux/v4.14/arch/sh/oprofile/common.c
new file mode 100644
index 0000000..e4dd5d5
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/oprofile/common.c
@@ -0,0 +1,64 @@
+/*
+ * arch/sh/oprofile/init.c
+ *
+ * Copyright (C) 2003 - 2010  Paul Mundt
+ *
+ * Based on arch/mips/oprofile/common.c:
+ *
+ *	Copyright (C) 2004, 2005 Ralf Baechle
+ *	Copyright (C) 2005 MIPS Technologies, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/perf_event.h>
+#include <linux/slab.h>
+#include <asm/processor.h>
+
+extern void sh_backtrace(struct pt_regs * const regs, unsigned int depth);
+
+#ifdef CONFIG_HW_PERF_EVENTS
+/*
+ * This will need to be reworked when multiple PMUs are supported.
+ */
+static char *sh_pmu_op_name;
+
+char *op_name_from_perf_id(void)
+{
+	return sh_pmu_op_name;
+}
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+	ops->backtrace = sh_backtrace;
+
+	if (perf_num_counters() == 0)
+		return -ENODEV;
+
+	sh_pmu_op_name = kasprintf(GFP_KERNEL, "%s/%s",
+				   UTS_MACHINE, perf_pmu_name());
+	if (unlikely(!sh_pmu_op_name))
+		return -ENOMEM;
+
+	return oprofile_perf_init(ops);
+}
+
+void oprofile_arch_exit(void)
+{
+	oprofile_perf_exit();
+	kfree(sh_pmu_op_name);
+}
+#else
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+	ops->backtrace = sh_backtrace;
+	return -ENODEV;
+}
+void oprofile_arch_exit(void) {}
+#endif /* CONFIG_HW_PERF_EVENTS */
diff --git a/src/kernel/linux/v4.14/arch/sh/tools/Makefile b/src/kernel/linux/v4.14/arch/sh/tools/Makefile
new file mode 100644
index 0000000..2082af1
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/tools/Makefile
@@ -0,0 +1,16 @@
+#
+# arch/sh/tools/Makefile
+#
+# Copyright (C) 2003  Paul Mundt
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Shamelessly cloned from ARM.
+#
+
+include/generated/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
+	@echo '  Generating $@'
+	$(Q)mkdir -p $(dir $@)
+	$(Q)LC_ALL=C $(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/src/kernel/linux/v4.14/arch/sh/tools/gen-mach-types b/src/kernel/linux/v4.14/arch/sh/tools/gen-mach-types
new file mode 100644
index 0000000..6d7c2d8
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/tools/gen-mach-types
@@ -0,0 +1,48 @@
+#!/bin/awk
+# SPDX-License-Identifier: GPL-2.0
+#
+# Awk script to generate include/generated/machtypes.h
+# Heavily based on arch/arm/tools/gen-mach-types
+#
+BEGIN	{ nr = 0 }
+/^#/	{ next }
+/^[ 	]*$/ { next }
+
+NF == 2 {
+	  mach[nr] = $1;
+	  config[nr] = "CONFIG_"$2;
+	  nr++;
+	}
+
+END	{
+	  printf("/*\n");
+	  printf(" * Automagically generated, don't touch.\n");
+	  printf(" */\n");
+	  printf("#ifndef __ASM_SH_MACHTYPES_H\n");
+	  printf("#define __ASM_SH_MACHTYPES_H\n");
+	  printf("\n");
+	  printf("/*\n");
+	  printf(" * We'll use the following MACH_xxx defs for placeholders for the time\n");
+	  printf(" * being .. these will all go away once sh_machtype is assigned per-board.\n");
+	  printf(" *\n");
+	  printf(" * For now we leave things the way they are for backwards compatibility.\n");
+	  printf(" */\n");
+	  printf("\n");
+	  printf("/* Mach types */\n");
+
+	  for (i = 0; i < nr; i++) {
+	      printf("#ifdef %s\n", config[i]);
+	      printf("  #define MACH_%s\t\t1\n", mach[i]);
+	      printf("#else\n");
+	      printf("  #define MACH_%s\t\t0\n", mach[i]);
+	      printf("#endif\n");
+	    }
+
+	  printf("\n");
+	  printf("/* Machtype checks */\n");
+	  for (i = 0; i < nr; i++)
+	      printf("#define mach_is_%s()\t\t\t(MACH_%s)\n",
+	     	 tolower(mach[i]), mach[i]);
+	  printf("\n");
+	  printf("#endif /* __ASM_SH_MACHTYPES_H */\n");
+	}
diff --git a/src/kernel/linux/v4.14/arch/sh/tools/mach-types b/src/kernel/linux/v4.14/arch/sh/tools/mach-types
new file mode 100644
index 0000000..569977e
--- /dev/null
+++ b/src/kernel/linux/v4.14/arch/sh/tools/mach-types
@@ -0,0 +1,68 @@
+#
+# MACH_<xxx>		CONFIG_<xxx>
+#
+
+#
+# List of board groups.
+#
+SE			SH_SOLUTION_ENGINE
+HIGHLANDER		SH_HIGHLANDER
+RTS7751R2D		SH_RTS7751R2D
+RSK			SH_RSK
+ALPHA_BOARD		SH_ALPHA_BOARD
+
+#
+# List of companion chips / MFDs.
+#
+HD64461			HD64461
+
+#
+# List of boards.
+#
+7206SE			SH_7206_SOLUTION_ENGINE
+7343SE			SH_7343_SOLUTION_ENGINE
+7619SE			SH_7619_SOLUTION_ENGINE
+7721SE			SH_7721_SOLUTION_ENGINE
+7722SE			SH_7722_SOLUTION_ENGINE
+7724SE			SH_7724_SOLUTION_ENGINE
+7751SE			SH_7751_SOLUTION_ENGINE
+7780SE			SH_7780_SOLUTION_ENGINE
+HP6XX			SH_HP6XX
+DREAMCAST		SH_DREAMCAST
+SNAPGEAR		SH_SECUREEDGE5410
+EDOSK7705		SH_EDOSK7705
+EDOSK7760		SH_EDOSK7760
+SDK7786			SH_SDK7786
+SH4202_MICRODEV		SH_SH4202_MICRODEV
+SH03			SH_SH03
+LANDISK			SH_LANDISK
+R7780RP			SH_R7780RP
+R7780MP			SH_R7780MP
+R7785RP			SH_R7785RP
+TITAN			SH_TITAN
+SHMIN			SH_SHMIN
+LBOXRE2			SH_LBOX_RE2
+X3PROTO			SH_X3PROTO
+MAGICPANELR2		SH_MAGIC_PANEL_R2
+R2D_PLUS		RTS7751R2D_PLUS
+R2D_1			RTS7751R2D_1
+CAYMAN			SH_CAYMAN
+SDK7780			SH_SDK7780
+MIGOR			SH_MIGOR
+RSK7201			SH_RSK7201
+RSK7203			SH_RSK7203
+RSK7264			SH_RSK7264
+RSK7269			SH_RSK7269
+AP325RXA		SH_AP325RXA
+SH2007			SH_SH2007
+SH7757LCR		SH_SH7757LCR
+SH7763RDP		SH_SH7763RDP
+SH7785LCR		SH_SH7785LCR
+SH7785LCR_PT		SH_SH7785LCR_PT
+URQUELL			SH_URQUELL
+ESPT			SH_ESPT
+POLARIS			SH_POLARIS
+KFR2R09			SH_KFR2R09
+ECOVEC			SH_ECOVEC
+APSH4A3A		SH_APSH4A3A
+APSH4AD0A		SH_APSH4AD0A