[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/acpi/acpica/dbxface.c b/src/kernel/linux/v4.14/drivers/acpi/acpica/dbxface.c
new file mode 100644
index 0000000..b698532
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/acpi/acpica/dbxface.c
@@ -0,0 +1,519 @@
+/*******************************************************************************
+ *
+ * Module Name: dbxface - AML Debugger external interfaces
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2017, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "amlcode.h"
+#include "acdebug.h"
+#include "acinterp.h"
+
+#define _COMPONENT ACPI_CA_DEBUGGER
+ACPI_MODULE_NAME("dbxface")
+
+/* Local prototypes */
+static acpi_status
+acpi_db_start_command(struct acpi_walk_state *walk_state,
+ union acpi_parse_object *op);
+
+#ifdef ACPI_OBSOLETE_FUNCTIONS
+void acpi_db_method_end(struct acpi_walk_state *walk_state);
+#endif
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_db_start_command
+ *
+ * PARAMETERS: walk_state - Current walk
+ * op - Current executing Op, from AML interpreter
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Enter debugger command loop
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_db_start_command(struct acpi_walk_state *walk_state,
+ union acpi_parse_object *op)
+{
+ acpi_status status;
+
+ /* TBD: [Investigate] are there namespace locking issues here? */
+
+ /* acpi_ut_release_mutex (ACPI_MTX_NAMESPACE); */
+
+ /* Go into the command loop and await next user command */
+
+ acpi_gbl_method_executing = TRUE;
+ status = AE_CTRL_TRUE;
+
+ while (status == AE_CTRL_TRUE) {
+
+ /* Notify the completion of the command */
+
+ status = acpi_os_notify_command_complete();
+ if (ACPI_FAILURE(status)) {
+ goto error_exit;
+ }
+
+ /* Wait the readiness of the command */
+
+ status = acpi_os_wait_command_ready();
+ if (ACPI_FAILURE(status)) {
+ goto error_exit;
+ }
+
+ status =
+ acpi_db_command_dispatch(acpi_gbl_db_line_buf, walk_state,
+ op);
+ }
+
+ /* acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE); */
+
+error_exit:
+ if (ACPI_FAILURE(status) && status != AE_CTRL_TERMINATE) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "While parsing/handling command line"));
+ }
+ return (status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_db_signal_break_point
+ *
+ * PARAMETERS: walk_state - Current walk
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Called for AML_BREAKPOINT_OP
+ *
+ ******************************************************************************/
+
+void acpi_db_signal_break_point(struct acpi_walk_state *walk_state)
+{
+
+#ifndef ACPI_APPLICATION
+ if (acpi_gbl_db_thread_id != acpi_os_get_thread_id()) {
+ return;
+ }
+#endif
+
+ /*
+ * Set the single-step flag. This will cause the debugger (if present)
+ * to break to the console within the AML debugger at the start of the
+ * next AML instruction.
+ */
+ acpi_gbl_cm_single_step = TRUE;
+ acpi_os_printf("**break** Executed AML BreakPoint opcode\n");
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_db_single_step
+ *
+ * PARAMETERS: walk_state - Current walk
+ * op - Current executing op (from aml interpreter)
+ * opcode_class - Class of the current AML Opcode
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Called just before execution of an AML opcode.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_db_single_step(struct acpi_walk_state *walk_state,
+ union acpi_parse_object *op, u32 opcode_class)
+{
+ union acpi_parse_object *next;
+ acpi_status status = AE_OK;
+ u32 original_debug_level;
+ union acpi_parse_object *display_op;
+ union acpi_parse_object *parent_op;
+ u32 aml_offset;
+
+ ACPI_FUNCTION_ENTRY();
+
+#ifndef ACPI_APPLICATION
+ if (acpi_gbl_db_thread_id != acpi_os_get_thread_id()) {
+ return (AE_OK);
+ }
+#endif
+
+ /* Check the abort flag */
+
+ if (acpi_gbl_abort_method) {
+ acpi_gbl_abort_method = FALSE;
+ return (AE_ABORT_METHOD);
+ }
+
+ aml_offset = (u32)ACPI_PTR_DIFF(op->common.aml,
+ walk_state->parser_state.aml_start);
+
+ /* Check for single-step breakpoint */
+
+ if (walk_state->method_breakpoint &&
+ (walk_state->method_breakpoint <= aml_offset)) {
+
+ /* Check if the breakpoint has been reached or passed */
+ /* Hit the breakpoint, resume single step, reset breakpoint */
+
+ acpi_os_printf("***Break*** at AML offset %X\n", aml_offset);
+ acpi_gbl_cm_single_step = TRUE;
+ acpi_gbl_step_to_next_call = FALSE;
+ walk_state->method_breakpoint = 0;
+ }
+
+ /* Check for user breakpoint (Must be on exact Aml offset) */
+
+ else if (walk_state->user_breakpoint &&
+ (walk_state->user_breakpoint == aml_offset)) {
+ acpi_os_printf("***UserBreakpoint*** at AML offset %X\n",
+ aml_offset);
+ acpi_gbl_cm_single_step = TRUE;
+ acpi_gbl_step_to_next_call = FALSE;
+ walk_state->method_breakpoint = 0;
+ }
+
+ /*
+ * Check if this is an opcode that we are interested in --
+ * namely, opcodes that have arguments
+ */
+ if (op->common.aml_opcode == AML_INT_NAMEDFIELD_OP) {
+ return (AE_OK);
+ }
+
+ switch (opcode_class) {
+ case AML_CLASS_UNKNOWN:
+ case AML_CLASS_ARGUMENT: /* constants, literals, etc. do nothing */
+
+ return (AE_OK);
+
+ default:
+
+ /* All other opcodes -- continue */
+ break;
+ }
+
+ /*
+ * Under certain debug conditions, display this opcode and its operands
+ */
+ if ((acpi_gbl_db_output_to_file) ||
+ (acpi_gbl_cm_single_step) || (acpi_dbg_level & ACPI_LV_PARSE)) {
+ if ((acpi_gbl_db_output_to_file) ||
+ (acpi_dbg_level & ACPI_LV_PARSE)) {
+ acpi_os_printf
+ ("\nAML Debug: Next AML Opcode to execute:\n");
+ }
+
+ /*
+ * Display this op (and only this op - zero out the NEXT field
+ * temporarily, and disable parser trace output for the duration of
+ * the display because we don't want the extraneous debug output)
+ */
+ original_debug_level = acpi_dbg_level;
+ acpi_dbg_level &= ~(ACPI_LV_PARSE | ACPI_LV_FUNCTIONS);
+ next = op->common.next;
+ op->common.next = NULL;
+
+ display_op = op;
+ parent_op = op->common.parent;
+ if (parent_op) {
+ if ((walk_state->control_state) &&
+ (walk_state->control_state->common.state ==
+ ACPI_CONTROL_PREDICATE_EXECUTING)) {
+ /*
+ * We are executing the predicate of an IF or WHILE statement
+ * Search upwards for the containing IF or WHILE so that the
+ * entire predicate can be displayed.
+ */
+ while (parent_op) {
+ if ((parent_op->common.aml_opcode ==
+ AML_IF_OP)
+ || (parent_op->common.aml_opcode ==
+ AML_WHILE_OP)) {
+ display_op = parent_op;
+ break;
+ }
+ parent_op = parent_op->common.parent;
+ }
+ } else {
+ while (parent_op) {
+ if ((parent_op->common.aml_opcode ==
+ AML_IF_OP)
+ || (parent_op->common.aml_opcode ==
+ AML_ELSE_OP)
+ || (parent_op->common.aml_opcode ==
+ AML_SCOPE_OP)
+ || (parent_op->common.aml_opcode ==
+ AML_METHOD_OP)
+ || (parent_op->common.aml_opcode ==
+ AML_WHILE_OP)) {
+ break;
+ }
+ display_op = parent_op;
+ parent_op = parent_op->common.parent;
+ }
+ }
+ }
+
+ /* Now we can display it */
+
+#ifdef ACPI_DISASSEMBLER
+ acpi_dm_disassemble(walk_state, display_op, ACPI_UINT32_MAX);
+#endif
+
+ if ((op->common.aml_opcode == AML_IF_OP) ||
+ (op->common.aml_opcode == AML_WHILE_OP)) {
+ if (walk_state->control_state->common.value) {
+ acpi_os_printf
+ ("Predicate = [True], IF block was executed\n");
+ } else {
+ acpi_os_printf
+ ("Predicate = [False], Skipping IF block\n");
+ }
+ } else if (op->common.aml_opcode == AML_ELSE_OP) {
+ acpi_os_printf
+ ("Predicate = [False], ELSE block was executed\n");
+ }
+
+ /* Restore everything */
+
+ op->common.next = next;
+ acpi_os_printf("\n");
+ if ((acpi_gbl_db_output_to_file) ||
+ (acpi_dbg_level & ACPI_LV_PARSE)) {
+ acpi_os_printf("\n");
+ }
+ acpi_dbg_level = original_debug_level;
+ }
+
+ /* If we are not single stepping, just continue executing the method */
+
+ if (!acpi_gbl_cm_single_step) {
+ return (AE_OK);
+ }
+
+ /*
+ * If we are executing a step-to-call command,
+ * Check if this is a method call.
+ */
+ if (acpi_gbl_step_to_next_call) {
+ if (op->common.aml_opcode != AML_INT_METHODCALL_OP) {
+
+ /* Not a method call, just keep executing */
+
+ return (AE_OK);
+ }
+
+ /* Found a method call, stop executing */
+
+ acpi_gbl_step_to_next_call = FALSE;
+ }
+
+ /*
+ * If the next opcode is a method call, we will "step over" it
+ * by default.
+ */
+ if (op->common.aml_opcode == AML_INT_METHODCALL_OP) {
+
+ /* Force no more single stepping while executing called method */
+
+ acpi_gbl_cm_single_step = FALSE;
+
+ /*
+ * Set the breakpoint on/before the call, it will stop execution
+ * as soon as we return
+ */
+ walk_state->method_breakpoint = 1; /* Must be non-zero! */
+ }
+
+ acpi_ex_exit_interpreter();
+ status = acpi_db_start_command(walk_state, op);
+ acpi_ex_enter_interpreter();
+
+ /* User commands complete, continue execution of the interrupted method */
+
+ return (status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_initialize_debugger
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Init and start debugger
+ *
+ ******************************************************************************/
+
+acpi_status acpi_initialize_debugger(void)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_initialize_debugger);
+
+ /* Init globals */
+
+ acpi_gbl_db_buffer = NULL;
+ acpi_gbl_db_filename = NULL;
+ acpi_gbl_db_output_to_file = FALSE;
+
+ acpi_gbl_db_debug_level = ACPI_LV_VERBOSITY2;
+ acpi_gbl_db_console_debug_level = ACPI_NORMAL_DEFAULT | ACPI_LV_TABLES;
+ acpi_gbl_db_output_flags = ACPI_DB_CONSOLE_OUTPUT;
+
+ acpi_gbl_db_opt_no_ini_methods = FALSE;
+
+ acpi_gbl_db_buffer = acpi_os_allocate(ACPI_DEBUG_BUFFER_SIZE);
+ if (!acpi_gbl_db_buffer) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+ memset(acpi_gbl_db_buffer, 0, ACPI_DEBUG_BUFFER_SIZE);
+
+ /* Initial scope is the root */
+
+ acpi_gbl_db_scope_buf[0] = AML_ROOT_PREFIX;
+ acpi_gbl_db_scope_buf[1] = 0;
+ acpi_gbl_db_scope_node = acpi_gbl_root_node;
+
+ /* Initialize user commands loop */
+
+ acpi_gbl_db_terminate_loop = FALSE;
+
+ /*
+ * If configured for multi-thread support, the debug executor runs in
+ * a separate thread so that the front end can be in another address
+ * space, environment, or even another machine.
+ */
+ if (acpi_gbl_debugger_configuration & DEBUGGER_MULTI_THREADED) {
+
+ /* These were created with one unit, grab it */
+
+ status = acpi_os_initialize_debugger();
+ if (ACPI_FAILURE(status)) {
+ acpi_os_printf("Could not get debugger mutex\n");
+ return_ACPI_STATUS(status);
+ }
+
+ /* Create the debug execution thread to execute commands */
+
+ acpi_gbl_db_threads_terminated = FALSE;
+ status = acpi_os_execute(OSL_DEBUGGER_MAIN_THREAD,
+ acpi_db_execute_thread, NULL);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not start debugger thread"));
+ acpi_gbl_db_threads_terminated = TRUE;
+ return_ACPI_STATUS(status);
+ }
+ } else {
+ acpi_gbl_db_thread_id = acpi_os_get_thread_id();
+ }
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_initialize_debugger)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_terminate_debugger
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Stop debugger
+ *
+ ******************************************************************************/
+void acpi_terminate_debugger(void)
+{
+
+ /* Terminate the AML Debugger */
+
+ acpi_gbl_db_terminate_loop = TRUE;
+
+ if (acpi_gbl_debugger_configuration & DEBUGGER_MULTI_THREADED) {
+
+ /* Wait the AML Debugger threads */
+
+ while (!acpi_gbl_db_threads_terminated) {
+ acpi_os_sleep(100);
+ }
+
+ acpi_os_terminate_debugger();
+ }
+
+ if (acpi_gbl_db_buffer) {
+ acpi_os_free(acpi_gbl_db_buffer);
+ acpi_gbl_db_buffer = NULL;
+ }
+
+ /* Ensure that debug output is now disabled */
+
+ acpi_gbl_db_output_flags = ACPI_DB_DISABLE_OUTPUT;
+}
+
+ACPI_EXPORT_SYMBOL(acpi_terminate_debugger)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_set_debugger_thread_id
+ *
+ * PARAMETERS: thread_id - Debugger thread ID
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Set debugger thread ID
+ *
+ ******************************************************************************/
+void acpi_set_debugger_thread_id(acpi_thread_id thread_id)
+{
+ acpi_gbl_db_thread_id = thread_id;
+}
+
+ACPI_EXPORT_SYMBOL(acpi_set_debugger_thread_id)