[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/acpi/acpica/utresdecode.c b/src/kernel/linux/v4.14/drivers/acpi/acpica/utresdecode.c
new file mode 100644
index 0000000..e15a253
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/acpi/acpica/utresdecode.c
@@ -0,0 +1,315 @@
+/*******************************************************************************
+ *
+ * Module Name: utresdecode - Resource descriptor keyword strings
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2017, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acresrc.h"
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utresdecode")
+
+#if defined (ACPI_DEBUG_OUTPUT) || \
+ defined (ACPI_DISASSEMBLER) || \
+ defined (ACPI_DEBUGGER)
+/*
+ * Strings used to decode resource descriptors.
+ * Used by both the disassembler and the debugger resource dump routines
+ */
+const char *acpi_gbl_bm_decode[] = {
+ "NotBusMaster",
+ "BusMaster"
+};
+
+const char *acpi_gbl_config_decode[] = {
+ "0 - Good Configuration",
+ "1 - Acceptable Configuration",
+ "2 - Suboptimal Configuration",
+ "3 - ***Invalid Configuration***",
+};
+
+const char *acpi_gbl_consume_decode[] = {
+ "ResourceProducer",
+ "ResourceConsumer"
+};
+
+const char *acpi_gbl_dec_decode[] = {
+ "PosDecode",
+ "SubDecode"
+};
+
+const char *acpi_gbl_he_decode[] = {
+ "Level",
+ "Edge"
+};
+
+const char *acpi_gbl_io_decode[] = {
+ "Decode10",
+ "Decode16"
+};
+
+const char *acpi_gbl_ll_decode[] = {
+ "ActiveHigh",
+ "ActiveLow",
+ "ActiveBoth",
+ "Reserved"
+};
+
+const char *acpi_gbl_max_decode[] = {
+ "MaxNotFixed",
+ "MaxFixed"
+};
+
+const char *acpi_gbl_mem_decode[] = {
+ "NonCacheable",
+ "Cacheable",
+ "WriteCombining",
+ "Prefetchable"
+};
+
+const char *acpi_gbl_min_decode[] = {
+ "MinNotFixed",
+ "MinFixed"
+};
+
+const char *acpi_gbl_mtp_decode[] = {
+ "AddressRangeMemory",
+ "AddressRangeReserved",
+ "AddressRangeACPI",
+ "AddressRangeNVS"
+};
+
+const char *acpi_gbl_rng_decode[] = {
+ "InvalidRanges",
+ "NonISAOnlyRanges",
+ "ISAOnlyRanges",
+ "EntireRange"
+};
+
+const char *acpi_gbl_rw_decode[] = {
+ "ReadOnly",
+ "ReadWrite"
+};
+
+const char *acpi_gbl_shr_decode[] = {
+ "Exclusive",
+ "Shared",
+ "ExclusiveAndWake", /* ACPI 5.0 */
+ "SharedAndWake" /* ACPI 5.0 */
+};
+
+const char *acpi_gbl_siz_decode[] = {
+ "Transfer8",
+ "Transfer8_16",
+ "Transfer16",
+ "InvalidSize"
+};
+
+const char *acpi_gbl_trs_decode[] = {
+ "DenseTranslation",
+ "SparseTranslation"
+};
+
+const char *acpi_gbl_ttp_decode[] = {
+ "TypeStatic",
+ "TypeTranslation"
+};
+
+const char *acpi_gbl_typ_decode[] = {
+ "Compatibility",
+ "TypeA",
+ "TypeB",
+ "TypeF"
+};
+
+const char *acpi_gbl_ppc_decode[] = {
+ "PullDefault",
+ "PullUp",
+ "PullDown",
+ "PullNone"
+};
+
+const char *acpi_gbl_ior_decode[] = {
+ "IoRestrictionNone",
+ "IoRestrictionInputOnly",
+ "IoRestrictionOutputOnly",
+ "IoRestrictionNoneAndPreserve"
+};
+
+const char *acpi_gbl_dts_decode[] = {
+ "Width8bit",
+ "Width16bit",
+ "Width32bit",
+ "Width64bit",
+ "Width128bit",
+ "Width256bit",
+};
+
+/* GPIO connection type */
+
+const char *acpi_gbl_ct_decode[] = {
+ "Interrupt",
+ "I/O"
+};
+
+/* Serial bus type */
+
+const char *acpi_gbl_sbt_decode[] = {
+ "/* UNKNOWN serial bus type */",
+ "I2C",
+ "SPI",
+ "UART"
+};
+
+/* I2C serial bus access mode */
+
+const char *acpi_gbl_am_decode[] = {
+ "AddressingMode7Bit",
+ "AddressingMode10Bit"
+};
+
+/* I2C serial bus slave mode */
+
+const char *acpi_gbl_sm_decode[] = {
+ "ControllerInitiated",
+ "DeviceInitiated"
+};
+
+/* SPI serial bus wire mode */
+
+const char *acpi_gbl_wm_decode[] = {
+ "FourWireMode",
+ "ThreeWireMode"
+};
+
+/* SPI serial clock phase */
+
+const char *acpi_gbl_cph_decode[] = {
+ "ClockPhaseFirst",
+ "ClockPhaseSecond"
+};
+
+/* SPI serial bus clock polarity */
+
+const char *acpi_gbl_cpo_decode[] = {
+ "ClockPolarityLow",
+ "ClockPolarityHigh"
+};
+
+/* SPI serial bus device polarity */
+
+const char *acpi_gbl_dp_decode[] = {
+ "PolarityLow",
+ "PolarityHigh"
+};
+
+/* UART serial bus endian */
+
+const char *acpi_gbl_ed_decode[] = {
+ "LittleEndian",
+ "BigEndian"
+};
+
+/* UART serial bus bits per byte */
+
+const char *acpi_gbl_bpb_decode[] = {
+ "DataBitsFive",
+ "DataBitsSix",
+ "DataBitsSeven",
+ "DataBitsEight",
+ "DataBitsNine",
+ "/* UNKNOWN Bits per byte */",
+ "/* UNKNOWN Bits per byte */",
+ "/* UNKNOWN Bits per byte */"
+};
+
+/* UART serial bus stop bits */
+
+const char *acpi_gbl_sb_decode[] = {
+ "StopBitsZero",
+ "StopBitsOne",
+ "StopBitsOnePlusHalf",
+ "StopBitsTwo"
+};
+
+/* UART serial bus flow control */
+
+const char *acpi_gbl_fc_decode[] = {
+ "FlowControlNone",
+ "FlowControlHardware",
+ "FlowControlXON",
+ "/* UNKNOWN flow control keyword */"
+};
+
+/* UART serial bus parity type */
+
+const char *acpi_gbl_pt_decode[] = {
+ "ParityTypeNone",
+ "ParityTypeEven",
+ "ParityTypeOdd",
+ "ParityTypeMark",
+ "ParityTypeSpace",
+ "/* UNKNOWN parity keyword */",
+ "/* UNKNOWN parity keyword */",
+ "/* UNKNOWN parity keyword */"
+};
+
+/* pin_config type */
+
+const char *acpi_gbl_ptyp_decode[] = {
+ "Default",
+ "Bias Pull-up",
+ "Bias Pull-down",
+ "Bias Default",
+ "Bias Disable",
+ "Bias High Impedance",
+ "Bias Bus Hold",
+ "Drive Open Drain",
+ "Drive Open Source",
+ "Drive Push Pull",
+ "Drive Strength",
+ "Slew Rate",
+ "Input Debounce",
+ "Input Schmitt Trigger",
+};
+
+#endif