[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/char/xillybus/xillybus.h b/src/kernel/linux/v4.14/drivers/char/xillybus/xillybus.h
new file mode 100644
index 0000000..b9a9eb6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/char/xillybus/xillybus.h
@@ -0,0 +1,160 @@
+/*
+ * linux/drivers/misc/xillybus.h
+ *
+ * Copyright 2011 Xillybus Ltd, http://xillybus.com
+ *
+ * Header file for the Xillybus FPGA/host framework.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the smems of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#ifndef __XILLYBUS_H
+#define __XILLYBUS_H
+
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/cdev.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+
+struct xilly_endpoint_hardware;
+
+struct xilly_buffer {
+ void *addr;
+ dma_addr_t dma_addr;
+ int end_offset; /* Counting elements, not bytes */
+};
+
+struct xilly_idt_handle {
+ unsigned char *chandesc;
+ unsigned char *idt;
+ int entries;
+};
+
+/*
+ * Read-write confusion: wr_* and rd_* notation sticks to FPGA view, so
+ * wr_* buffers are those consumed by read(), since the FPGA writes to them
+ * and vice versa.
+ */
+
+struct xilly_channel {
+ struct xilly_endpoint *endpoint;
+ int chan_num;
+ int log2_element_size;
+ int seekable;
+
+ struct xilly_buffer **wr_buffers; /* FPGA writes, driver reads! */
+ int num_wr_buffers;
+ unsigned int wr_buf_size; /* In bytes */
+ int wr_fpga_buf_idx;
+ int wr_host_buf_idx;
+ int wr_host_buf_pos;
+ int wr_empty;
+ int wr_ready; /* Significant only when wr_empty == 1 */
+ int wr_sleepy;
+ int wr_eof;
+ int wr_hangup;
+ spinlock_t wr_spinlock;
+ struct mutex wr_mutex;
+ wait_queue_head_t wr_wait;
+ wait_queue_head_t wr_ready_wait;
+ int wr_ref_count;
+ int wr_synchronous;
+ int wr_allow_partial;
+ int wr_exclusive_open;
+ int wr_supports_nonempty;
+
+ struct xilly_buffer **rd_buffers; /* FPGA reads, driver writes! */
+ int num_rd_buffers;
+ unsigned int rd_buf_size; /* In bytes */
+ int rd_fpga_buf_idx;
+ int rd_host_buf_pos;
+ int rd_host_buf_idx;
+ int rd_full;
+ spinlock_t rd_spinlock;
+ struct mutex rd_mutex;
+ wait_queue_head_t rd_wait;
+ int rd_ref_count;
+ int rd_allow_partial;
+ int rd_synchronous;
+ int rd_exclusive_open;
+ struct delayed_work rd_workitem;
+ unsigned char rd_leftovers[4];
+};
+
+struct xilly_endpoint {
+ /*
+ * One of pdev and dev is always NULL, and the other is a valid
+ * pointer, depending on the type of device
+ */
+ struct pci_dev *pdev;
+ struct device *dev;
+ struct xilly_endpoint_hardware *ephw;
+
+ struct list_head ep_list;
+ int dma_using_dac; /* =1 if 64-bit DMA is used, =0 otherwise. */
+ __iomem void *registers;
+ int fatal_error;
+
+ struct mutex register_mutex;
+ wait_queue_head_t ep_wait;
+
+ /* Channels and message handling */
+ struct cdev cdev;
+
+ int major;
+ int lowest_minor; /* Highest minor = lowest_minor + num_channels - 1 */
+
+ int num_channels; /* EXCLUDING message buffer */
+ struct xilly_channel **channels;
+ int msg_counter;
+ int failed_messages;
+ int idtlen;
+
+ u32 *msgbuf_addr;
+ dma_addr_t msgbuf_dma_addr;
+ unsigned int msg_buf_size;
+};
+
+struct xilly_endpoint_hardware {
+ struct module *owner;
+ void (*hw_sync_sgl_for_cpu)(struct xilly_endpoint *,
+ dma_addr_t,
+ size_t,
+ int);
+ void (*hw_sync_sgl_for_device)(struct xilly_endpoint *,
+ dma_addr_t,
+ size_t,
+ int);
+ int (*map_single)(struct xilly_endpoint *,
+ void *,
+ size_t,
+ int,
+ dma_addr_t *);
+};
+
+struct xilly_mapping {
+ void *device;
+ dma_addr_t dma_addr;
+ size_t size;
+ int direction;
+};
+
+irqreturn_t xillybus_isr(int irq, void *data);
+
+struct xilly_endpoint *xillybus_init_endpoint(struct pci_dev *pdev,
+ struct device *dev,
+ struct xilly_endpoint_hardware
+ *ephw);
+
+int xillybus_endpoint_discovery(struct xilly_endpoint *endpoint);
+
+void xillybus_endpoint_remove(struct xilly_endpoint *endpoint);
+
+#endif /* __XILLYBUS_H */